Science.gov

Sample records for canberra tokamak

  1. Space Radar Image of Canberra, Australia

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Australia's capital city, Canberra, is shown in the center of this spaceborne radar image. Images like this can help urban planners assess land use patterns. Heavily developed areas appear in bright patchwork patterns of orange, yellow and blue. Dense vegetation appears bright green, while cleared areas appear in dark blue or black. Located in southeastern Australia, the site of Canberra was selected as the capital in 1901 as a geographic compromise between Sydney and Melbourne. Design and construction of the city began in 1908 under the supervision of American architect Walter Burley-Griffin. Lake Burley-Griffin is located above and to the left of the center of the image. The bright pink area is the Parliament House. The city streets, lined with government buildings, radiate like spokes from the Parliament House. The bright purple cross in the lower left corner of the image is a reflection from one of the large dish-shaped radio antennas at the Tidbinbilla, Canberra Deep Space Network Communication Complex, operated jointly by NASA and the Australian Space Office. This image was acquired by the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) on April 10, 1994, onboard the space shuttle Endeavour. The image is 28 kilometers by 25 kilometers (17 miles by 15 miles) and is centered at 35.35 degrees south latitude, 149.17 degrees east longitude. North is toward the upper left. The colors are assigned to different radar frequencies and polarizations as follows: red is L-band, horizontally transmitted and received; green is L-band, horizontally transmitted and vertically received; and blue is C-band, horizontally transmitted and vertically received. SIR-C/X-SAR, a joint mission of the German, Italian, and United States space agencies, is part of NASA's Office of Mission to Planet Earth.

  2. Space Radar Image of Canberra, Australia

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Australia's capital city, Canberra, is shown in the center of this spaceborne radar image. Images like this can help urban planners assess land use patterns. Heavily developed areas appear in bright patchwork patterns of orange, yellow and blue. Dense vegetation appears bright green, while cleared areas appear in dark blue or black. Located in southeastern Australia, the site of Canberra was selected as the capital in 1901 as a geographic compromise between Sydney and Melbourne. Design and construction of the city began in 1908 under the supervision of American architect Walter Burley-Griffin. Lake Burley-Griffin is located above and to the left of the center of the image. The bright pink area is the Parliament House. The city streets, lined with government buildings, radiate like spokes from the Parliament House. The bright purple cross in the lower left corner of the image is a reflection from one of the large dish-shaped radio antennas at the Tidbinbilla, Canberra Deep Space Network Communication Complex, operated jointly by NASA and the Australian Space Office. This image was acquired by the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) on April 10, 1994, onboard the space shuttle Endeavour. The image is 28 kilometers by 25 kilometers (17 miles by 15 miles) and is centered at 35.35 degrees south latitude, 149.17 degrees east longitude. North is toward the upper left. The colors are assigned to different radar frequencies and polarizations as follows: red is L-band, horizontally transmitted and received; green is L-band, horizontally transmitted and vertically received; and blue is C-band, horizontally transmitted and vertically received. SIR-C/X-SAR, a joint mission of the German, Italian, and United States space agencies, is part of NASA's Office of Mission to Planet Earth.

  3. Canberra Alpha Sentry Installation Functional Design Criteria (FDC)

    SciTech Connect

    WHITE, W.F.

    1999-12-16

    This document provides the functional design criteria for the installation of the Canberra Alpha Sentry System at selected locations within the Plutonium Finishing Plant (PFP). The equipment being installed is identified by part number in Section 3 and the locations are given in Section 5. The design, procurement and installation are assigned to Fluor Federal Services.

  4. Pu-238 assay performance with the Canberra IQ3 system

    SciTech Connect

    Booth, L.; Gillespie, B.; Seaman, G.

    1997-11-01

    Canberra Industries has recently completed a demonstration project at the Westinghouse Savannah River Site (WSRC) to characterize 55-gallon drums containing Pu-238 contaminated waste. The goal of this project was to detect and quantify Pu-238 contaminated waste. The goal of this project was to detect and quantify Pu-238 waste to detection limits of less than 50 nCi/g using gamma assay techniques. This would permit reclassification of these drums from transuranic (TRU) waste to low-level waste (LLW). The instrument used for this assay was a Canberra IQ3 high sensitivity gamma assay system, mounted in a trailer. The results of the measurements demonstrate achievement of detection levels as low as 1 nCi/g for low density waste drums, and good correlation with known concentrations in several test drums. In addition, the data demonstrates significant advantages for using large area low-energy germanium detectors for achieving the lowest possible MDAs for gamma rays in the 80-250 keV range. 1 fig., 2 tabs.

  5. ECH tokamak

    SciTech Connect

    Firestone, M.A.; Mau, T.K.; Conn, R.W.

    1985-04-01

    A small steady-state tokamak capable of producing power in the 100 to 300 MWe range and relying on electron cyclotron RF heating (ECH) for both heating and current drive is described. Working in the first MHD stability regime for tokamaks, the approach adheres to the recently discovered maximum beta limit. An appropriate figure of merit is the ratio of the fusion power to absorbed RF power. Efficient devices are feasible at both small and large values of fusion power, thereby pointing to a development path for an attractive commercial fusion reactor.

  6. Report of the Canberra Commission on the elimination of nuclear weapons

    SciTech Connect

    1996-08-14

    The Canberra Commission on the Elimination of Nuclear Weapons, convened in November 1995 by the Government of Australia, says the threat of nuclear terrorism and political uncertainties in the post-Cold War world make it imperative that nuclear weapons should be abolished.

  7. Canberra Commission outlines steps to rid the world of nuclear weapons

    SciTech Connect

    1996-08-14

    The Canberra Commission on the Elimination of Nuclear Weapons, convened in November 1995 by the Government of Australia, says the threat of nuclear terrorism and political uncertainties in the post-Cold War world make it imperative that nuclear weapons should be abolished.

  8. The De Havilland 61 "Canberra" (British) : a 6-8 passenger airplane

    NASA Technical Reports Server (NTRS)

    1928-01-01

    Made for an Australian buyer, the Canberra is capable of carrying a payload of 1900 lbs. with a top speed of 126 M.P.H. At 105-110 M.P.H. it has a range of about 475 miles. It has a single Jupiter VI engine.

  9. Addressing Language Teacher Professional Learning Needs: An Evaluation of the AFMLTA National Conference, Canberra 2013

    ERIC Educational Resources Information Center

    Morgan, Anne-Marie; Absalom, Matthew; Scrimgeour, Andrew

    2014-01-01

    The 19th biennial AFMLTA National Languages Conference was held in Canberra in July 2013. The conference, along with other professional learning activities conduced at a local level and for individual languages, aims to provide teachers of languages with the opportunity to work toward the professional learning outcomes outlined in the AITSL…

  10. A Personal Memoir of Policy Failure: The Failed Merger of ANU and the Canberra CAE

    ERIC Educational Resources Information Center

    Scott, Roger

    2004-01-01

    The more immediate context of the events the author describes in this article is needed in order to identify the policy framework within which the Australian National University (ANU)-Canberra CAE (CCAE) merger was placed as a component of a wider public policy initiative undertaken by John Dawkins. There were four major components in that wider…

  11. Addressing Language Teacher Professional Learning Needs: An Evaluation of the AFMLTA National Conference, Canberra 2013

    ERIC Educational Resources Information Center

    Morgan, Anne-Marie; Absalom, Matthew; Scrimgeour, Andrew

    2014-01-01

    The 19th biennial AFMLTA National Languages Conference was held in Canberra in July 2013. The conference, along with other professional learning activities conduced at a local level and for individual languages, aims to provide teachers of languages with the opportunity to work toward the professional learning outcomes outlined in the AITSL…

  12. Detection and tracing of the medical radioisotope 131I in the Canberra environment

    NASA Astrophysics Data System (ADS)

    Gilfillan, Nathan R.; Timmers, Heiko

    2012-10-01

    The transport and radioecology of the therapeutical radioisotope 131I has been studied in Canberra, Australia. The isotope has been detected in water samples and its activity quantified via characteristic J-ray photo peaks. A comparison of measurements on samples from upstream and downstream of the Canberra waste water treatment plant shows that 131I is discharged from the plant outflow into the local Molonglo river. This is consistent with observations in other urban environments. A time-correlation between the measured activities in the outflow and the therapeutical treatment cycle at the hospital identifies the medical treatment as the source of the isotope. Enhanced activity levels of 131I have been measured for fish samples. This may permit conclusions on 131I uptake by the biosphere. Due to the well-defined and intermittent input of 131I into the sewage, the Canberra situation is ideally suited for radioecological studies. Furthermore, the 131I activity may be applied in tracer studies of sewage transport to and through the treatment plant and as an indicator of outflow dilution following discharge to the environment.

  13. PPPL tokamak program

    SciTech Connect

    Furth, H.P.

    1984-10-01

    The economic prospects of the tokamak are reviewed briefly and found to be favorable - if the size of ignited tokamak plasmas can be kept small and appropriate auxiliary systems can be developed. The main objectives of the Princeton Plasma Physics Laboratory tokamak program are: (1) exploration of the physics of high-temperature toroidal confinement, in TFTR; (2) maximization of the tokamak beta value, in PBX; (3) development of reactor-relevant rf techniques, in PLT.

  14. Tokamak Systems Code

    SciTech Connect

    Reid, R.L.; Barrett, R.J.; Brown, T.G.; Gorker, G.E.; Hooper, R.J.; Kalsi, S.S.; Metzler, D.H.; Peng, Y.K.M.; Roth, K.E.; Spampinato, P.T.

    1985-03-01

    The FEDC Tokamak Systems Code calculates tokamak performance, cost, and configuration as a function of plasma engineering parameters. This version of the code models experimental tokamaks. It does not currently consider tokamak configurations that generate electrical power or incorporate breeding blankets. The code has a modular (or subroutine) structure to allow independent modeling for each major tokamak component or system. A primary benefit of modularization is that a component module may be updated without disturbing the remainder of the systems code as long as the imput to or output from the module remains unchanged.

  15. Calibration and Use of the Canberra iSolo 300G

    SciTech Connect

    Smith, T; Graham, C L; Sundsmo, T; Shingleton, K L

    2010-11-24

    This procedure provides instructions for the calibration and use of the Canberra iSolo Low Background Alpha/Beta Counting System (iSolo) that is used for counting air filters and swipe samples. This detector is capable of providing radioisotope identification (e.g., it can discriminate between radon daughters and plutonium). This procedure includes step-by-step instructions for: (1) Performing periodic or daily 'Background' and 'Efficiency QC' checks; (2) Setting-up the iSolo for counting swipes and air filters; (3) Counting swipes and air filters for alpha and beta activity; and (4) Annual calibration.

  16. Characterization of Canberra's Tomographic Gamma-Ray Can Scanner ('Can-TGS') - 13311

    SciTech Connect

    LeBlanc, P.J.; Lagana, J.; Kirkpatrick, J.; Nakazawa, D.; Smith, S. Kane; Venkataraman, R.; Villani, M.; Young, B.M.

    2013-07-01

    The Tomographic Gamma-ray Scanner (TGS) for large volume drummed waste has been successfully commercialized by Canberra over the last several years. As part of an R and D effort to continually improve this technology, we have developed a scaled down version of the standard commercial product (Can-TGS). The Can-TGS is able to accommodate cans and pails of various sizes, ranging from sub-liter to 20 liter volumes with densities of up to 4 g/cc. The Can-TGS has three diamond-shaped collimators (6.35 mm [0.25''], 12.7 mm [0.5''], and 25.4 mm [1'']) to facilitate a range of container volumes and heights. As with the standard TGS, the Can-TGS has a transmission source sub-system, where the transmission source can be easily swapped between sources of various strengths and type. The acquisition portion of the Can-TGS is powered by the Canberra Lynx{sup R} MCA which accommodates both multi-spectral scaling (MSS) and list-mode. Recently, the Can-TGS has been successfully characterized for an 18.93 L [5-gallon] container for the 25.4 mm diamond-shaped collimator. In principle, a single measurement (with good statistics) is required for each configuration in order to characterize the system. However, for this study, measurements were performed for several different matrices. For each matrix used, 6 different measurements were acquired. For each of these measurements, the drum was rotated 60 deg. with respect to the previous starting position. This procedure was followed in order to average out any radial bias that might be produced from just a single measurement. A description of the Can-TGS system is given. The details of the recent characterization measurements and the associated data analysis and results are presented. TGS results are compared with Segmented Gamma Scanner (SGS) results for the same source configuration. Additionally, the future outlook for Canberra's R and D efforts with this system is discussed. These efforts include TGS algorithm optimization, improving

  17. Diagram of a Hydrogen Fuel System on NACA’s Martin B-57B Canberra

    NASA Image and Video Library

    1957-02-21

    This diagram shows a hydrogen fuel system designed by researchers at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory and installed on a Martin B-57B Canberra aircraft. Lewis researchers accelerated their studies of high energy propellants in the early 1950s. In late 1954, Lewis researchers studied the combustion characteristics of gaseous hydrogen in a turbojet combustor. It was found that the hydrogen provided a very high efficiency. Almost immediately thereafter, Associate Director Abe Silverstein became focused on the possibilities of hydrogen for aircraft propulsion. That fall, Silverstein secured a contract to work with the air force to examine the practicality of liquid hydrogen aircraft. A B-57B Canberra was obtained by the air force especially for this project, referred to as Project Bee. The aircraft was powered by two Wright J65 engines, one of which was modified so that it could be operated using either traditional or liquid hydrogen propellants. The engine and its liquid hydrogen fuel system were tested extensively in the Altitude Wind Tunnel and the Four Burner Area test cells in 1955 and 1956. A B-57B flight program was planned to test the system on an actual aircraft. The aircraft would take off using jet fuel, switch to liquid hydrogen while over Lake Erie, then after burning the hydrogen supply switch back to jet fuel for the landing. The third test flight, in February 1957, was a success, and the ensuing B-57B flights remain the only demonstration of hydrogen-powered aircraft.

  18. Characteristics and radiative impact of the aerosol generated by the Canberra firestorm of January 2003

    NASA Astrophysics Data System (ADS)

    Mitchell, R. M.; O'Brien, D. M.; Campbell, S. K.

    2006-01-01

    The extensive fires in southeastern Australia in January 2003 culminated in the Canberra firestorm of 18 January. The fires generated a pall of smoke that blanketed the Canberra area for the following week and affected the region for most of the following month. Analysis of Sun photometer data shows that aerosol optical depths τ500 > 7 were observed during the week following the firestorm. During the subsequent month the smoke aerosol dispersed, although background conditions (τ500 < 0.1) did not return until after significant rain in late February. Analysis of aerosol optical properties retrieved from sky radiance scans shows remarkably high single scattering albedo (ϖ440 ˜ 0.96) with only a small depression evident in the week following the firestorm. This indicates that the aerosols were significantly less absorbing than would be expected from smoke freshly generated by flaming combustion, possibly a result of inefficient combustion due to the extreme intensity of the fire, and marks them out as quite distinct from the more absorbing biomass burning aerosols encountered in the savannas of tropical Australia. The high single scattering albedo gave rise to mean radiative forcings of -50 W m-2 at the top of the atmosphere and -172 W m-2 at the surface during the week following the firestorm. Maximum heating rates are depressed by a factor of two at ϖ440 = 0.96 compared with ϖ440 = 0.88. Nevertheless, for plausible atmospheric profiles the large optical depths caused heating rates peaking at more than 10 K/day near the top of the smoke layer. The layer stabilized the lower troposphere through a combination of reduced surface heating and a positive gradient in heating rate through most of the layer. The enhanced stability suppressed surface temperatures and winds during the week following the firestorm, reducing the risk of renewed fire danger, and suggesting a useful role for aerosol effects in weather prediction models.

  19. Options for commercial tokamaks

    SciTech Connect

    Dabiri, A.E.; Keeton, D.C.; Thomson, S.L.

    1986-07-01

    Systems studies have been performed at the Fusion Engineering Design Center (FEDC) to assess commercial tokamak options. One study investigates the economics of high-beta operation and determines an optimum operating range of 10 to 20% beta, with a corresponding neutron wall loading of 6 to 8 MW/m/sup 2/. A second study determines conditions under which small, low-power tokamaks can be economically combined into a 1200-MW(electric) multiplex power plant. The results of these studies have directed future efforts at the FEDC toward a high-beta, tokamak design using a modular maintenance configuration.

  20. Tokamak reactor studies

    SciTech Connect

    Baker, C.C.

    1981-01-01

    This paper presents an overview of tokamak reactor studies with particular attention to commercial reactor concepts developed within the last three years. Emphasis is placed on DT fueled reactors for electricity production. A brief history of tokamak reactor studies is presented. The STARFIRE, NUWMAK, and HFCTR studies are highlighted. Recent developments that have increased the commercial attractiveness of tokamak reactor designs are discussed. These developments include smaller plant sizes, higher first wall loadings, improved maintenance concepts, steady-state operation, non-divertor particle control, and improved reactor safety features.

  1. Tokamak ARC damage

    SciTech Connect

    Murray, J.G.; Gorker, G.E.

    1985-01-01

    Tokamak fusion reactors will have large plasma currents of approximately 10 MA with hundreds of megajoules stored in the magnetic fields. When a major plasma instability occurs, the disruption of the plasma current induces voltage in the adjacent conducting structures, giving rise to large transient currents. The induced voltages may be sufficiently high to cause arcing across sector gaps or from one protruding component to another. This report reviews a tokamak arcing scenario and provides guidelines for designing tokamaks to minimize the possibility of arc damage.

  2. Modular tokamak magnetic system

    DOEpatents

    Yang, Tien-Fang

    1988-01-01

    A modular tokamak system comprised of a plurality of interlocking moldules. Each module is comprised of a vacuum vessel section, a toroidal field coil, moldular saddle coils which generate a poloidal magnetic field and ohmic heating coils.

  3. Venus Transit 2012: the expeditions to Svalbard, Norway, and Canberra, Australia

    NASA Astrophysics Data System (ADS)

    Pérez-Ayúcar, M.; Breitfellner, M.; Castillo, M.; Martinez, S.; Prieto, R.

    2012-09-01

    A transit of Venus in front of the solar disk as seen from Earth is a rare astronomical event which comes in pairs separated by approximately 8 years and occurs only about every 105 years. Although its historic scientific importance, e.g. to measure the distances in the solar system or to analyze the Venus atmosphere, has diminished since humanity roams our solar system with robotic spacecrafts, a Venus Transit remains a spectacular astronomical event, worth observing. Unfortunately, this time the transit occurs during the night in Europe, from about midnight to seven o'clock in the morning, CEST. However, some astronomy enthusiasts working at ESA's European Space Astronomy Centre (ESAC) in Madrid, Spain, will organize a campaign to observe the Venus Transit 2012 from two separate locations: Svalbard in Norway, and Canberra in Australia. The expeditions are done in the framework of ESA and its educational project CESAR (Cooperation through Education in Science and Astronomy Research). Both teams will be equipped with a twin set of telescopes, each comprising a 90mm solar H_alpha (656 nm wavelength) telescope, and a white light 102mm telescope. H-alpha and white light images will be simultaneously transmitted live during the whole Venus Transit, through a dedicated public web page. This talk will summarize the two expeditions, its preparations and its results.

  4. Martin B-57B Canberra with a Noise Suppressor on its Right Engine

    NASA Image and Video Library

    1966-09-21

    A Martin B-57B Canberra outfitted with a noise suppressor on its right engine at the National Aeronautics and Space Administration (NASA) Lewis Research Center. The aircraft was being prepared for the October 1966 Inspection of the center. The Inspection also marked Lewis’ twentieth anniversary. Lewis researchers had been studying engine noise for almost a decade, but the problem seemed to be increasing in the mid-1960s with heavier airline traffic and larger engines. Researchers discovered early on that the majority of the noise did not emanate from the engine itself, but from the mixing of the hot exhaust gasses with the atmosphere. Attempts to reduce the turbulence using new exhaust nozzles were successful but often resulted in decreased engine performance. The researchers decided to try to lower the jet nozzle exit velocity without decreasing its thrust. The inlet mass air flow had to be increased to accomplish this. The Lewis B-57B was powered by two Wright Aeronautical J65 turbojets. Lewis engineers modified the stators on the two engines to simulate the noise levels from more-modern turbofan engines. A noise suppressor was added to only one of the two engines, seen here on the left. The engines were run one at a time at power levels similar to landing while the aircraft sat on the Lewis hangar apron. A microphone and recording equipment was setup to capture the noise levels. The engine with the suppressor produced 13 fewer decibels than the standard engine.

  5. Background frequency of Bacillus species at the Canberra Airport: A 12 month study.

    PubMed

    Gahan, Michelle E; Thomas, Rory; Rossi, Rebecca; Nelson, Michelle; Roffey, Paul; Richardson, Michelle M; McNevin, Dennis

    2015-12-01

    Anthrax, caused by Bacillus anthracis, is a naturally occurring disease in Australia. Whilst mainly limited to livestock in grazing regions of Victoria and New South Wales, movement of people, stock and vehicles means B. anthracis could be present outside this region. Of particular interest is the "background" prevalence of B. anthracis at transport hubs including airports. The aim of this study was to determine the background frequency of B. anthracis and the commonly used hoax agent Bacillus thuringiensis at the Canberra Airport over a 12 month period. Samples were collected daily for seven days each month from August 2011-July 2012 and analyzed using species specific real-time polymerase chain reaction. Fourteen samples (of a total of 575) were positive for the B. anthracis PL3 genomic marker, 24 for the cya (pXO1) plasmid marker and five for the capB (pXO2) plasmid marker. Whilst five samples were positive for both PL3 and cya, no samples were positive for all three markers hence there is no evidence to suggest the presence of pathogenic B. anthracis strains. B. anthracis targets were detected primarily in February 2012 and B. thuringiensis peaked in October and November 2011 and again in April and May 2012. This study provides a rapid method to screen for, and differentiate, Bacillus species. Armed with this information investigators will be able to discriminate a "threat" from "background" frequencies should the need arise. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  6. Downscaling approach to develop future sub-daily IDF relations for Canberra Airport Region, Australia

    NASA Astrophysics Data System (ADS)

    Herath, H. M. S. M.; Sarukkalige, P. R.; Nguyen, V. T. V.

    2015-06-01

    Downscaling of climate projections is the most adopted method to assess the impacts of climate change at regional and local scale. In the last decade, downscaling techniques which provide reasonable improvement to resolution of General Circulation Models' (GCMs) output are developed in notable manner. Most of these techniques are limited to spatial downscaling of GCMs' output and still there is a high demand to develop temporal downscaling approaches. As the main objective of this study, combined approach of spatial and temporal downscaling is developed to improve the resolution of rainfall predicted by GCMs. Canberra airport region is subjected to this study and the applicability of proposed downscaling approach is evaluated for Sydney, Melbourne, Brisbane, Adelaide, Perth and Darwin regions. Statistical Downscaling Model (SDSM) is used to spatial downscaling and numerical model based on scaling invariant concept is used to temporal downscaling of rainfalls. National Centre of Environmental Prediction (NCEP) data is used in SDSM model calibration and validation. Regression based bias correction function is used to improve the accuracy of downscaled annual maximum rainfalls using HadCM3-A2. By analysing the non-central moments of observed rainfalls, single time regime (from 30 min to 24 h) is identified which exist scaling behaviour and it is used to estimate the sub daily extreme rainfall depths from daily downscaled rainfalls. Finally, as the major output of this study, Intensity Duration Frequency (IDF) relations are developed for the future periods of 2020s, 2050s and 2080s in the context of climate change.

  7. Advanced commercial tokamak study

    SciTech Connect

    Thomson, S.L.; Dabiri, A.E.; Keeton, D.C.; Brown, T.G.; Bussell, G.T.

    1985-12-01

    Advanced commercial tokamak studies were performed by the Fusion Engineering Design Center (FEDC) as a participant in the Tokamak Power Systems Studies (TPSS) project coordinated by the Office of Fusion Energy. The FEDC studies addressed the issues of tokamak reactor cost, size, and complexity. A scoping study model was developed to determine the effect of beta on tokamak economics, and it was found that a competitive cost of electricity could be achieved at a beta of 10 to 15%. The implications of operating at a beta of up to 25% were also addressed. It was found that the economics of fusion, like those of fission, improve as unit size increases. However, small units were found to be competitive as elements of a multiplex plant, provided that unit cost and maintenance time reductions are realized for the small units. The modular tokamak configuration combined several new approaches to develop a less complex and lower cost reactor. The modular design combines the toroidal field coil with the reactor structure, locates the primary vacuum boundary at the reactor cell wall, and uses a vertical assembly and maintenance approach. 12 refs., 19 figs.

  8. Texas Experimental Tokamak

    SciTech Connect

    Wootton, A.J.

    1993-04-01

    This progress report covers the period from November 1, 1990 to April 30, 1993. During that period, TEXT was operated as a circular tokamak with a material limiter. It was devoted to the study of basic plasma physics, in particular to study of fluctuations, turbulence, and transport. The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics, specifically to conduct a research program under the following main headings: (1) to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks, in particular to understand the role of turbulence; (2) to study physics of the edge plasma, in particular the turbulence; (3) to study the physics or resonant magnetic fields (ergodic magnetic divertors, intra island pumping); and (4) to study the physics of electron cyclotron heating (ECRH). Results of studies in each of these areas are reported.

  9. Completely bootstrapped tokamak

    SciTech Connect

    Weening, R.H. ); Boozer, A.H. )

    1992-01-01

    Numerical simulations of the evolution of large-scale magnetic fields have been developed using a mean-field Ohm's law. The Ohm's law is coupled to a {Delta}{prime} stabilty analysis and a magnetic island growth equation in order to simulate the behavior of tokamak plasmas that are subject to tearing modes. In one set of calculations, the magnetohydrodynamic (MHD)-stable regime of the tokamak is examined via the construction of an {ital l}{sub {ital i}} -{ital q}{sub {ital a}} diagram. The results confirm previous calculations that show that tearing modes introduce a stability boundary into the {ital l}{sub {ital i}} -{ital q}{sub {ital a}} space. In another series of simulations, the interaction between tearing modes and the bootstrap current is investigated. The results indicate that a completely bootstrapped tokamak may be possible, even in the absence of any externally applied loop voltage or current drive.

  10. An outbreak of gastroenteritis linked to a buffet lunch served at a Canberra restaurant.

    PubMed

    Sloan-Gardner, Timothy S; Glynn-Robinson, Anna-Jane; Roberts-Witteveen, April; Krsteski, Radomir; Rogers, Keith; Kaye, Andrew; Moffatt, Cameron R M

    2014-12-31

    In 2013, an outbreak of gastrointestinal illness occurred following a buffet lunch at a restaurant in Canberra. An investigation was conducted to identify the cause of illness and to implement appropriate public health measures to prevent further disease. We conducted a retrospective cohort study via telephone interviews, using a structured questionnaire developed from the restaurant buffet menu. A case was defined as someone who ate the buffet lunch at the restaurant on the implicated date and developed any symptoms of gastrointestinal illness (such as diarrhoea, abdominal pain and nausea) following the consumption of food. A total of 74% (225/303) of known attendees were interviewed, of whom 56% (125/225) had become ill. The median incubation period and duration of illness were 13 and 19 hours respectively. The most commonly reported symptoms were diarrhoea (94%, 118/125) and abdominal pain (82%, 103/125). A toxin-mediated gastrointestinal illness was suspected based on the incubation period, duration of illness and the symptoms. The environmental health investigation identified a lack of designated hand washing facilities in the kitchen, an absence of thermometers for measuring food temperatures and several maintenance and minor cleaning issues. A number of food samples were taken for microbiological analysis. Multivariable analysis showed that illness was significantly associated with consuming curried prawns (OR 18.4, 95% CI 8.6-39.3, P < 0.001) and Caesar salad (OR 3.6, 95% CI 1.8-7.5, P 0.001). Enterotoxin-producing Staphylococcus aureus and Bacillus cereus were identified in leftover samples of cooked buffet food, but this food was not epidemiologically implicated. The investigation suggested that a breakdown in cleanliness, temperature control and food handling practices may have resulted in contamination of the buffet food. In order to prevent such outbreaks in the future, caterers and restaurateurs need to ensure they have the appropriate facilities and

  11. Outcomes of haematology/oncology patients admitted to intensive care unit at The Canberra Hospital.

    PubMed

    Parakh, S; Piggin, A; Neeman, T; Mitchell, I; Crispin, P; Davis, A

    2014-11-01

    Outcomes for haematology/oncology patients have improved; however, determining their suitability for intensive care unit (ICU) admission remains challenging and controversial. Examine outcomes of patients admitted to an Australian tertiary hospital ICU and explore potential prognostic factors. A retrospective review of patients with haematological and solid tumour malignancies non-electively admitted to The Canberra Hospital (TCH) ICU, between January 2008 and December 2012. Patient demographics, cancer details, reasons for ICU admission and Acute Physiologic and Chronic Health Evaluation (APACHE) II scores were collected, and survival rates calculated and correlated with potential prognostic factors. Of 205 patients, 113 (55%) had haematological malignancies, and 92 (45%) had solid tumours: 58% male and mean age 60.3 years (standard deviation (SD) 13.4). Eighty-two per cent of solid tumour patients had metastatic disease and 55% received palliative chemotherapy. Primary reasons for ICU admission included sepsis (59%), respiratory distress (37%) and hypotension/shock (18%). Mean APACHE II score was 20.1(SD 0.55); mean length of stay in ICU, 4 days (SD 5.2); ICU survival was 76% with 62% and 41% alive at 30 days and 6 months respectively. Overall 1-year survival was 36%. High APACHE II scores and ≥2 organs failing were significant risk factors for 30-day mortality. Short-term outcomes were similar to contemporary studies from a general tertiary hospital setting and better than historical data. Sixty-two per cent of patients were alive 30 days post-ICU admission, with a significant minority alive at 12 months, confirming some patients achieved worthwhile outcomes. Further research is needed to ensure appropriate patient selection and to explore quality of life post ICU. © 2014 The Authors; Internal Medicine Journal © 2014 Royal Australasian College of Physicians.

  12. Geochemical and microbiological fingerprinting of airborne dust that fell in Canberra, Australia, in October 2002

    NASA Astrophysics Data System (ADS)

    de Deckker, Patrick; Abed, Raeid M. M.; de Beer, Dirk; Hinrichs, Kai-Uwe; O'Loingsigh, Tadhg; Schefuß, Enno; Stuut, Jan-Berend W.; Tapper, Nigel J.; van der Kaars, Sander

    2008-12-01

    During the night of 22-23 October 2002, a large amount of airborne dust fell with rain over Canberra, located some 200 km from Australia's east coast, and at an average altitude of 650 m. It is estimated that during that night about 6 g m-2 of aeolian dust fell. We have conducted a vast number of analyses to "fingerprint" some of the dust and used the following techniques: grain size analysis; scanning electron microscope imagery; major, trace, and rare earth elemental, plus Sr and Nd isotopic analyses; organic compound analyses with respective compound-specific isotope analyses; pollen extraction to identify the vegetation sources; and molecular cloning of 16S rRNA genes in order to identify dust bacterial composition. DNA analyses show that most obtained 16S rRNA sequences belong mainly to three groups: Proteobacteria (25%), Bacteriodetes (23%), and gram-positive bacteria (23%). In addition, we investigated the meteorological conditions that led to the dust mobilization and transport using model and satellite data. Grain sizes of the mineral dust show a bimodal distribution typical of proximal dust, rather than what is found over oceans, and the bimodal aspect of size distribution confirms wet deposition by rain droplets. The inorganic geochemistry points to a source along/near the Darling River in NW New South Wales, a region that is characteristically semiarid, and both the organic chemistry and palynoflora of the dust confirm the location of this source area. Meteorological reconstructions of the event again clearly identify the area near Bourke-Cobar as being the source of the dust. This study paves the way for determining the export of Australian airborne dust both in the oceans and other continents.

  13. ARIES tokamak reactor study

    SciTech Connect

    Steiner, D.; Embrechts, M.

    1990-07-01

    This is a status report on technical progress relative to the tasks identified for the fifth year of Grant No. FG02-85-ER52118. The ARIES tokamak reactor study is a multi-institutional effort to develop several visions of the tokamak as an attractive fusion reactor with enhanced economic, safety, and environmental features. The ARIES study is being coordinated by UCLA and involves a number of institutions, including RPI. The RPI group has been pursuing the following areas of research in the context of the ARIES-I design effort: MHD equilibrium and stability analyses; plasma-edge modeling and blanket materials issues. Progress in these areas is summarized herein.

  14. Tearing Modes in Tokamaks

    SciTech Connect

    White, R. B.

    2008-05-14

    This lecture gives a basic introduction to magnetic pound elds, magnetic surface destruction, toroidal equilibrium and tearing modes in a tokamak, including the linear and nonlinear development of these modes and their modi pound cation by current drive and bootstrap current, and sawtooth oscillations and disruptions.

  15. Modular tokamak configuration

    SciTech Connect

    Thomson, S.L.

    1985-01-01

    This report is concerned with the modular tokamak configuration, and presents information on the following topics: modularity; external vacuum boundary; vertical maintenance; combined reactor building/biological shield with totally remote maintenance; independent TF coils; minimum TF coil bore; saddle PF coils; and heat transport system in bore.

  16. Status of the tokamak program

    SciTech Connect

    Sheffield, J.

    1981-06-01

    During the past two decades, the tokamak program has made significant advances. As a result of these advances, the program has expanded, and construction is nearly completed of large facilities, including the US Tokamak Fusion Test Reactor (TFTR), that are capable of achieving energy break-even in the plasma. Design work is under way on the next application phase, exemplified by the US Fusion Engineering Device (FED) and the IAEA INTOR programs. There are many excellent reviews that give a broad history of the evolution of the tokamak program. In addition, reviews are available that give detailed descriptions of individual tokamak elements. This paper reviews the status of the tokamak program, concentrating on recent advances and areas important to the further advancement of the tokamak concept.

  17. Energy confinement in tokamaks

    SciTech Connect

    Sugihara, M.; Singer, C.

    1986-08-01

    A straightforward generalization is made of the ohmic heating energy confinement scalings of Pfeiffer and Waltz and Blackwell et. al. The resulting model is systematically calibrated to published data from limiter tokamaks with ohmic, electron cyclotron, and neutral beam heating. With considerably fewer explicitly adjustable free parameters, this model appears to give a better fit to the available data for limiter discharges than the combined ohmic/auxiliary heating model of Goldston.

  18. TPX tokamak construction management

    SciTech Connect

    Knutson, D.; Kungl, D.; Seidel, P.; Halfast, C.

    1995-12-31

    A construction management contract normally involves the acquisition of a construction management firm to assist in the design, planning, budget conformance, and coordination of the construction effort. In addition the construction management firm acts as an agent in the awarding of lower tier contracts. The TPX Tokamak Construction Management (TCM) approach differs in that the construction management firm is also directly responsible for the assembly and installation of the tokamak including the design and fabrication of all tooling required for assembly. The Systems Integration Support (SIS) contractor is responsible for the architect-engineering design of ancillary systems, such as heating and cooling, buildings, modifications and site improvements, and a variety of electrical requirements, including switchyards and >4kV power distribution. The TCM will be responsible for the procurement of materials and the installation of the ancillary systems, which can either be performed directly by the TCM or subcontracted to a lower tier subcontractor. Assurance that the TPX tokamak is properly assembled and ready for operation when turned over to the operations team is the primary focus of the construction management effort. To accomplish this a disciplined constructability program will be instituted. The constructability effort will involve the effective and timely integration of construction expertise into the planning, component design, and field operations. Although individual component design groups will provide liaison during the machine assembly operations, the construction management team is responsible for assembly.

  19. Magnetic confinement experiment -- 1: Tokamaks

    SciTech Connect

    Goldston, R.J.

    1994-12-31

    This report reviews presentations made at the 15th IAEA Conference on Plasma Physics and Controlled Nuclear Fusion on experimental tokamak physics, particularly on advances in core plasma physics, divertor and edge physics, heating and current drive, and tokamak concept optimization.

  20. Tokamak burn control

    SciTech Connect

    Sager, G.T.

    1988-06-01

    Research of the fusion plasma thermal instability and its control is reviewed. General models of the thermonuclear plasma are developed. Techniques of stability analysis commonly employed in burn control research are discussed. Methods for controlling the plasma against the thermal instability are reviewed. Emphasis is placed on applications to tokamak confinement concepts. Additional research which extends the results of previous research is suggested. Issues specific to the development of control strategies for mid-term engineering test reactors are identified and addressed. 100 refs., 24 figs., 10 tabs.

  1. Education for a Sustainable Society. Papers presented at the National Conference of the Australian College of Education (31st, Canberra, 1991).

    ERIC Educational Resources Information Center

    Anderson, Jonathan, Ed.

    The chapters in this book, developed from presentations made at the Annual Conference of the Australian College of Education in Canberra, explore the theme of a sustainable society and the role of education. In the first part, five writers explore the meaning of "sustainable society." Sir Ninian Stephen, Ian Lowe, and Janet Hunt argue…

  2. The Tokamak Physics Experiment

    SciTech Connect

    Davidson, R.C.; Goldston, R.J.; Neilson, G.H.; Thomassen, K.I.

    1995-06-01

    The mission of the Tokamak Physics Experiment (TPX) [Nevins {ital et} {ital al}., {ital Plasma} {ital Physics} {ital and} {ital Controlled} {ital Nuclear} {ital Fusion}, Wuerzburg (International Atomic Energy Agency, Vienna, 1992), Vol. 3, p. 279] is to develop the scientific basis for an economically competitive and continuously operating tokamak fusion power source. This complements the primary mission of the International Thermonuclear Experimental Reactor (ITER) [ITER Document Ser. No. 18 (International Atomic Energy Agency, Vienna, 1991)], the demonstration of ignition and long-pulse burn, and the integration of nuclear technologies. The TPX program is focused on making the demonstration power plant that follows ITER as compact and attractive as possible, and on permitting ITER to achieve its ultimate goal of steady-state operation. This mission of TPX requires the development of steady-state regimes with high beta, good confinement, and a high fraction of a self-driven bootstrap current. These regimes must be compatible with plasma stability, strong heat-flux dispersion in the divertor region, and effective particle control.

  3. The Tokamak Physics Experiment

    NASA Astrophysics Data System (ADS)

    Davidson, Ronald C.; Goldston, Robert J.; Neilson, George H.; Thomassen, Keith I.

    1995-06-01

    The mission of the Tokamak Physics Experiment (TPX) [Nevins et al., Plasma Physics and Controlled Nuclear Fusion, Würzburg (International Atomic Energy Agency, Vienna, 1992), Vol. 3, p. 279] is to develop the scientific basis for an economically competitive and continuously operating tokamak fusion power source. This complements the primary mission of the International Thermonuclear Experimental Reactor (ITER) [ITER Document Ser. No. 18 (International Atomic Energy Agency, Vienna, 1991)], the demonstration of ignition and long-pulse burn, and the integration of nuclear technologies. The TPX program is focused on making the demonstration power plant that follows ITER as compact and attractive as possible, and on permitting ITER to achieve its ultimate goal of steady-state operation. This mission of TPX requires the development of steady-state regimes with high beta, good confinement, and a high fraction of a self-driven bootstrap current. These regimes must be compatible with plasma stability, strong heat-flux dispersion in the divertor region, and effective particle control.

  4. Edge turbulence in tokamaks

    NASA Astrophysics Data System (ADS)

    Nedospasov, A. V.

    1992-12-01

    Edge turbulence is of decisive importance for the distribution of particle and energy fluxes to the walls of tokamaks. Despite the availability of extensive experimental data on the turbulence properties, its nature still remains a subject for discussion. This paper contains a review of the most recent theoretical and experimental studies in the field, including mainly the studies to which Wootton (A.J. Wooton, J. Nucl. Mater. 176 & 177 (1990) 77) referred to most in his review at PSI-9 and those published later. The available theoretical models of edge turbulence with volume dissipation due to collisions fail to fully interpret the entire combination of experimental facts. In the scrape-off layer of a tokamak the dissipation prevails due to the flow of current through potential shifts near the surface of limiters of divertor plates. The different origins of turbulence at the edge and in the core plasma due to such dissipation are discussed in this paper. Recent data on the electron temperature fluctuations enabled one to evaluate the electric probe measurements of turbulent flows of particles and heat critically. The latest data on the suppression of turbulence in the case of L-H transitions are given. In doing so, the possibility of exciting current instabilities in biasing experiments (rather than only to the suppression of existing turbulence) is given some attention. Possible objectives of further studies are also discussed.

  5. Tokamak building-design considerations for a large tokamak device

    SciTech Connect

    Barrett, R.J.; Thomson, S.L.

    1981-01-01

    Design and construction of a satisfactory tokamak building to support FED appears feasible. Further, a pressure vessel building does not appear necessary to meet the plant safety requirements. Some of the building functions will require safety class systems to assure reliable and safe operation. A rectangular tokamak building has been selected for FED preconceptual design which will be part of the confinement system relying on ventilation and other design features to reduce the consequences and probability of radioactivity release.

  6. Causes of major tokamak disruptions

    SciTech Connect

    White, R.B.; Monticello, D.A.

    1980-07-01

    The nonlinear saturation theory of the tearing mode is used to examine the necessary conditions for the occurrence of a major tokamak disruption. The results are compared with full three-dimensional numerical simulations, and with experimental data.

  7. Bootstrap current in a tokamak

    SciTech Connect

    Kessel, C.E.

    1994-03-01

    The bootstrap current in a tokamak is examined by implementing the Hirshman-Sigmar model and comparing the predicted current profiles with those from two popular approximations. The dependences of the bootstrap current profile on the plasma properties are illustrated. The implications for steady state tokamaks are presented through two constraints; the pressure profile must be peaked and {beta}{sub p} must be kept below a critical value.

  8. The Thor tokamak experiment

    NASA Astrophysics Data System (ADS)

    Argenti, L.; Bonizzoni, G.; Cirant, S.; Corti, S.; Grosso, G.; Lampis, G.; Rossi, L.; Carretta, U.; Jacchia, A.; de Luca, F.

    1981-06-01

    The principle characteristics of plasma discharges produced in Thor tokamak experiments are discussed. The equilibrium and stability characteristics of the plasma produced are considered, with attention given to the density limits and critical streaming parameter for stable operation. The temporal evolution of the main plasma parameters, including electron density, electron temperature distribution, hard X-ray emission from suprathermal electrons, neutral gas influx, plasma density and Ohmic heating efficiency, is then examined, with particular emphasis on means used to control the electron runaway. The results achieved are noted to have demonstrated the possibility of controlling both plasma equilibrium and discharge regime, and further improvements expected by the use of more efficient preionization, gas puffing and feedback poloidal control of column position are indicated.

  9. Filamentation in tokamaks

    SciTech Connect

    Cardozo, N.J.; Barth, C.J.; Chu, C.C.; Lok, J.; Montvai, A.; Oomens, A.A.; Peters, M.; Pijper, F.J.; de Rover, M.; Schueller, F.C.; Steenbakkers, M.F.; RTP team

    1995-09-01

    The relevance of a nest of toroidal flux surfaces as a paradigm of the magnetic topology of a tokamak plasma is challenged. High resolution Thomson scattering measurements of electron temperature and density in RTP show several hot filaments in the plasma center and sharp gradients near the sawtooth inversion radius and structures outside the sawtooth region under central ECH. In ohmic plasmas, too, the pressure and temperature profiles show significant bumps. These measurements give evidence of a complex magnetic topology. Transport in a medium with spatially strongly varying diffusivity is considered. It is shown that macroscopic transport is determined by the microscopic structure: a transport theory must predict this structure and the diffusivity in the insulating regions, while the {open_quote}turbulent{close_quote} diffusivity is irrelevant. A numerical approach to equilibria with broken surfaces is presented. {copyright} {ital 1995 American Institute of Physics.}

  10. The ARIES tokamak reactor study

    SciTech Connect

    Not Available

    1989-10-01

    The ARIES study is a community effort to develop several visions of tokamaks as fusion power reactors. The aims are to determine the potential economics, safety, and environmental features of a range of possible tokamak reactors, and to identify physics and technology areas with the highest leverage for achieving the best tokamak reactor. Three ARIES visions are planned, each having a different degree of extrapolation from the present data base in physics and technology. The ARIES-I design assumes a minimum extrapolation from current tokamak physics (e.g., 1st stability) and incorporates technological advances that can be available in the next 20 to 30 years. ARIES-II is a DT-burning tokamak which would operate at a higher beta in the 2nd MHD stability regime. It employs both potential advances in the physics and expected advances in technology and engineering. ARIES-II will examine the potential of the tokamak and the D{sup 3}He fuel cycle. This report is a collection of 14 papers on the results of the ARIES study which were presented at the IEEE 13th Symposium on Fusion Engineering (October 2-6, 1989, Knoxville, TN). This collection describes the ARIES research effort, with emphasis on the ARIES-I design, summarizing the major results, the key technical issues, and the central conclusions.

  11. Bibliography of fusion product physics in tokamaks

    SciTech Connect

    Hively, L. M.; Sigmar, D. J.

    1989-09-01

    Almost 700 citations have been compiled as the first step in reviewing the recent research on tokamak fusion product effects in tokamaks. The publications are listed alphabetically by the last name of the first author and by subject category.

  12. Interference estimate around Canberra DSN Station at 2.04 GHz during Huygens release phase from Cassini

    NASA Technical Reports Server (NTRS)

    Ho, Christian M.

    2005-01-01

    During the descent phase of the Huygens Probe released from the Cassini spacecraft and inserted at Titan, the Deep Space Network (DSN) Canberra Deep Space Station (DSS) 43 (with its 70-m antenna) is being considered as a backup station to directly receive the Huygens Probe data being transmitted at 2.04 GHz. This study provides an assessment on the interference level from the major nearby transmitters operating in this frequency band. The minimum trans-horizon attenuations are calculated using terrain topographic data and the Trans-Horizon Interference Propagation Loss (THIPL) Computing Program recently developed based on ITU-R P.452, and the calculations take into account all propagation modes under a 0.1% of time exceeded. We find that there are five terrestrial transmitters within 100 km of DSS 43. Transmitter 1 is the closest to DSS 43, and needs to be coordinated to avoid interference. The rest of the four transmitters will not interfere with DSS 43. The interference levels from these transmitters are all below the DSN protection criteria of 99.9% of time.

  13. Moving Divertor Plates in a Tokamak

    SciTech Connect

    S.J. Zweben, H. Zhang

    2009-02-12

    Moving divertor plates could help solve some of the problems of the tokamak divertor through mechanical ingenuity rather than plasma physics. These plates would be passively heated on each pass through the tokamak and cooled and reprocessed outside the tokamak. There are many design options using varying plate shapes, orientations, motions, coatings, and compositions.

  14. Tokamak Physics Experiment (TPX) design

    SciTech Connect

    Schmidt, J.A.

    1995-12-31

    TPX is a national project involving a large number of US fusion laboratories, universities, and industries. The element of the TPX requirements that is a primary driver for the hardware design is the fact that TPX tokamak hardware is being designed to accommodate steady state operation if the external systems are upgraded from the 1,000 second initial operation. TPX not only incorporates new physics, but also pioneers new technologies to be used in ITER and other future reactors. TPX will be the first tokamak with fully superconducting magnetic field coils using advanced conductors, will have internal nuclear shielding, will use robotics for machine maintenance, and will remove the continuous, concentrated heat flow from the plasma with new dispersal techniques and with special materials that are actively cooled. The Conceptual Design for TPX was completed during Fiscal Year 1993. The Preliminary Design formally began at the beginning of Fiscal Year 1994. Industrial contracts have been awarded for the design, with options for fabrication, of the primary tokamak hardware. A large fraction of the design and R and D effort during FY94 was focused on the tokamak and in turn on the tokamak magnets. The reason for this emphasis is because the magnets require a large design and R and D effort, and are critical to the project schedule. The magnet development is focused on conductor development, quench protection, and manufacturing R and D. The Preliminary Design Review for the Magnets is planned for fall, 1995.

  15. Resistive instabilities in tokamaks

    SciTech Connect

    Rutherford, P.H.

    1985-10-01

    Low-m tearing modes constitute the dominant instability problem in present-day tokamaks. In this lecture, the stability criteria for representative current profiles with q(0)-values slightly less than unit are reviewed; ''sawtooth'' reconnection to q(0)-values just at, or slightly exceeding, unity is generally destabilizing to the m = 2, n = 1 and m = 3, n = 2 modes, and severely limits the range of stable profile shapes. Feedback stabilization of m greater than or equal to 2 modes by rf heating or current drive, applied locally at the magnetic islands, appears feasible; feedback by island current drive is much more efficient, in terms of the radio-frequency power required, then feedback by island heating. Feedback stabilization of the m = 1 mode - although yielding particularly beneficial effects for resistive-tearing and high-beta stability by allowing q(0)-values substantially below unity - is more problematical, unless the m = 1 ideal-MHD mode can be made positively stable by strong triangular shaping of the central flux surfaces. Feedback techniques require a detectable, rotating MHD-like signal; the slowing of mode rotation - or the excitation of non-rotating modes - by an imperfectly conducting wall is also discussed.

  16. Status of tokamak experiments

    SciTech Connect

    Wolf, G.H.

    1996-03-01

    Plasma-wall interaction, heat removal and ash exhaust have emerged as the dominant problems still to be solved in order to achieve ignition and - even more difficult - to maintain a state of self-sustained thermo-nuclear burn. This is of particular delicacy, since those operational regimes which yield the best energy confinement correspond to an even better particle confinement and confinement of impurities, which then tend to accumulate in the plasma core and to result in disruption or degradation of the tokamak discharge. Therefore, plasma-wall interaction, heat removal and particle exhaust will determine not only the structure and configuration of the plasma edge region, of the wall system and of the materials facing the plasma, but also the final choice of useful confinement regimes. Moreover, the potential effect of powerful {alpha}-particle heating on plasma stability and confinement has to be kept below critical values. For the latter requirement, a final answer can only be obtained in an ITER-type device where ignition and burn will become accessible. 72 refs., 12 figs.

  17. Summary discussion: An integrated advanced tokamak reactor

    SciTech Connect

    Sauthoff, N.R.

    1994-12-31

    The tokamak concept improvement workshop addressed a wide range of issues involved in the development of a more attractive tokamak. The agenda for the workshop progressed from a general discussion of the long-range energy context (with the objective being the identification of a set of criteria and ``figures of merit`` for measuring the attractiveness of a tokamak concept) to particular opportunities for the improvement of the tokamak concept. The discussions concluded with a compilation of research program elements leading to an improved tokamak concept.

  18. Understanding disruptions in tokamaks

    NASA Astrophysics Data System (ADS)

    Zakharov, Leonid

    2011-10-01

    Disruptions in tokamaks are known since 1963 but even now some aspects of them remain a mystery. This talk describes progress made recently in understanding disruptions. A major step forward occurred in 2007 when the importance of galvanic contact of the plasma with the wall in plasma dynamics was pointed out. The toroidal asymmetry of plasma current, observed in JET vertical disruptions, was explained by the theory of the wall touching kink mode. The currents shared by the plasma with the wall and responsible for the asymmetry were identified as generated by the kink mode. Such currents are referred to as Hiro currents. They have shown exceptional consistency with the entire JET disruption data base (more than 5500 cases) and ruled out the long lasting interpretation based on ``halo currents,'' which contradict experiments even in the sign of the measured asymmetry. Accordingly, the sideways forces are understood and their scaling from JET to ITER was justified. Hiro currents provide also a plausible explanation of the current spike at the beginning of the disruptions. The important role of the plasma edge and its interaction with the wall was revealed. Based on this new understanding of disruptions, dedicated experiments on the current spike (J-TEXT, Wuhan, China) and runaway prevention by the repetitive triggering of kink modes (T-10, AUG, Tore Supra) were motivated and are in progress. Accordingly, the need for new, adaptive grid approaches to numerical simulations of disruptions became evident. In addition to the core MHD, simulations of realistic wall geometry, disruption specific plasma edge physics, plasma-wall interaction, and energetic particles need be developed. The first results of simulations of the fast MHD regime, Hiro current generation, and slower plasma decay due to a wall touching kink mode made with the new DSC code are presented. This work is supported by US DoE contract No. DE-AC02-09-CH11466.

  19. An enhanced tokamak startup model

    NASA Astrophysics Data System (ADS)

    Goswami, Rajiv; Artaud, Jean-François

    2017-01-01

    The startup of tokamaks has been examined in the past in varying degree of detail. This phase typically involves the burnthrough of impurities and the subsequent rampup of plasma current. A zero-dimensional (0D) model is most widely used where the time evolution of volume averaged quantities determines the detailed balance between the input and loss of particle and power. But, being a 0D setup, these studies do not take into consideration the co-evolution of plasma size and shape, and instead assume an unchanging minor and major radius. However, it is known that the plasma position and its minor radius can change appreciably as the plasma evolves in time to fill in the entire available volume. In this paper, an enhanced model for the tokamak startup is introduced, which for the first time takes into account the evolution of plasma geometry during this brief but highly dynamic period by including realistic one-dimensional (1D) effects within the broad 0D framework. In addition the effect of runaway electrons (REs) has also been incorporated. The paper demonstrates that the inclusion of plasma cross section evolution in conjunction with REs plays an important role in the formation and development of tokamak startup. The model is benchmarked against experimental results from ADITYA tokamak.

  20. Prospects for Tokamak Fusion Reactors

    SciTech Connect

    Sheffield, J.; Galambos, J.

    1995-04-01

    This paper first reviews briefly the status and plans for research in magnetic fusion energy and discusses the prospects for the tokamak magnetic configuration to be the basis for a fusion power plant. Good progress has been made in achieving fusion reactor-level, deuterium-tritium (D-T) plasmas with the production of significant fusion power in the Joint European Torus (up to 2 MW) and the Tokamak Fusion Test Reactor (up to 10 MW) tokamaks. Advances on the technologies of heating, fueling, diagnostics, and materials supported these achievements. The successes have led to the initiation of the design phases of two tokamaks, the International Thermonuclear Experimental Reactor (ITER) and the US Toroidal Physics Experiment (TPX). ITER will demonstrate the controlled ignition and extended bum of D-T plasmas with steady state as an ultimate goal. ITER will further demonstrate technologies essential to a power plant in an integrated system and perform integrated testing of the high heat flux and nuclear components required to use fusion energy for practical purposes. TPX will complement ITER by testing advanced modes of steady-state plasma operation that, coupled with the developments in ITER, will lead to an optimized demonstration power plant.

  1. Tokamak and RFP ignition requirements

    SciTech Connect

    Werley, K.A.

    1991-01-01

    A plasma model is applied to calculate numerically transport- confinement (n{tau}{sub E}) requirements and steady-state operation tokamak. The CIT tokamak and RFP ignition conditions are examined. Physics differences between RFP and tokamaks, and their consequences for a DT ignition machine, are discussed. The ignition RFP, compared to a tokamak, has many physics advantages, including ohmic heating to ignition (no need for auxiliary heating systems), higher beta, low ignition current, less sensitivity of ignition requirements to impurity effects, no hard disruptions (associated with beta or density limits), and successful operation with high radiation fractions (f{sub RAD} {approximately} 0.95). These physics advantages, coupled with important engineering advantages associated with lower external magnetic fields, larger aspect ratios, and smaller plasma cross sections translate into significant cost reductions for both ignition and power reactor. The primary drawback of the RFP is the uncertainty that the present confinement scaling will extrapolate to reactor regimes. The 4-MA ZTH was expected to extend the n{tau}{sub E} transport scaling data three order of magnitude above ZT-40M results, and if the present scaling held, to achieve a DT-equivalent scientific energy breakeven, Q=1. A basecase RFP ignition point is identified with a plasma current of 8.1 MA and no auxiliary heating. 16 refs., 4 figs., 1 tab.

  2. High Energy Particles in Tokamaks

    SciTech Connect

    White, R. B.

    2008-05-14

    This lecture covers the derivation of guiding center equations in a tokamak, orbit classification, the effect of magnetic perturbations and ripple, the interaction of particles with magnetohydrodynamic modes, including passing particle resonance, toroidal Alfven mode drive and saturation, the fishbone mode, and sawtooth stabilization.

  3. Bootstrapped tokamak with oscillating field current drive

    SciTech Connect

    Weening, R.H. )

    1993-07-01

    A magnetic helicity conserving mean-field Ohm's law is used to study bootstrapped tokamaks with oscillating field current drive. The Ohm's law leads to the conclusion that the tokamak bootstrap effect can convert the largely alternating current of oscillating field current drive into a direct toroidal plasma current. This plasma current rectification is due to the intrinsically nonlinear nature of the tokamak bootstrap effect, and suggests that it may be possible to maintain the toroidal current of a tokamak reactor by supplementing the bootstrap current with oscillating field current drive. Steady-state tokamak fusion reactors operating with oscillating field current drive could provide an alternative to tokamak reactors operating with external current drive.

  4. Cryogenic needs for future tokamaks

    NASA Astrophysics Data System (ADS)

    Katheder, H.

    The ITER tokamak is a machine using superconducting magnets. The windings of these magnets will be subjected to high heat loads resulting from a combination of nuclear energy absorption and AC-losses. It is estimated that about 100 kW at 4.5 K are needed. The total cooling mass flow rate will be around 10 - 15 kg/s. In addition to the large cryogenic power required for the superconducting magnets cryogenic power is also needed for refrigerated radiation shield, various cryopumps, fuel processing and test beds. A general description of the overall layout and the envisaged refrigerator cycle, necessary cold pumps and ancillary equipment is given. The basic cryogenic layout for the ITER tokakmak design, as developed during the conceptual design phase and a short overview about existing tokamak designs using superconducting magnets is given.

  5. Options for an ignited tokamak

    SciTech Connect

    Sheffield, J.

    1984-02-01

    It is expected that the next phase of the fusion program will involve a tokamak with the goals of providing an ignited plasma for pulses of hundreds of seconds. A simple model is described in this memorandum which establishes the physics conditions for such a self-sustaining plasma, for given ion and electron thermal diffusivities, in terms of R/a, b/a, I, B/q, epsilon ..beta../sub p/, anti T/sub i/, and anti T/sub e//anti T/sub i/. The model is used to produce plots showing the wide range of tokamaks that may ignite or have a given ignition margin. The constraints that limit this range are discussed.

  6. Folded waveguide designs for tokamaks

    NASA Astrophysics Data System (ADS)

    Hoffman, D. J.; Bigelow, T. S.; Fogelman, C. H.; Yugo, J. J.; Caughman, J. B. O.; Gardner, W. L.; Carter, M. D.; Probert, P. H.; Barbato, E.

    The folded waveguide (FWG) has been tested to the megawatt level in RFTF and shows great promise for tokamak use. It has three primary advantages: low electric field (anywhere) per unit power coupled to the plasma, strong structural capabilities, and better spectral content than loops. A tokamak test is now needed. Potential candidates include C-Mod at 80 MHz and FTU at 433 MHz. The waveguide test on the first machine will be directed at conventional ion cyclotron heating, while the test on the latter will be directed at direct electron heating. In addition, a variation of the folded waveguide is proposed to be tested on Phaedrus-T. In this paper, we discuss the advantages of the waveguide, the design layout, some of the potential physics programs, and how these programs may have an impact on its potential use in ITER.

  7. Neoclassical magnetic microislands in tokamaks

    SciTech Connect

    Kovalishen, E.A.; Mikhailovskii, A.B.; Botov, P.V.; Shirokov, M.S.; Konovalov, S.V.; Tsypin, V.S.; Galvao, R.M.O.

    2005-09-15

    Possibility of existence of neoclassical magnetic microislands (island width smaller than the ion Larmor radius) in a tokamak in the banana regime is shown. The rotation frequency of such islands is found. It is shown that for the case of positive electron temperature gradient, the bootstrap current destabilizes the microislands while the polarization current leads to their stabilization. Maximally possible neoclassical microisland width is estimated.

  8. Transport Equations In Tokamak Plasmas

    NASA Astrophysics Data System (ADS)

    Callen, J. D.

    2009-11-01

    Tokamak plasma transport equations are usually obtained by flux surface averaging the collisional Braginskii equations. However, tokamak plasmas are not in collisional regimes. Also, ad hoc terms are added for: neoclassical effects on the parallel Ohm's law (trapped particle effects on resistivity, bootstrap current); fluctuation-induced transport; heating, current-drive and flow sources and sinks; small B field non-axisymmetries; magnetic field transients etc. A set of self-consistent second order in gyroradius fluid-moment-based transport equations for nearly axisymmetric tokamak plasmas has been developed recently using a kinetic-based framework. The derivation uses neoclassical-based parallel viscous force closures, and includes all the effects noted above. Plasma processes on successive time scales (and constraints they impose) are considered sequentially: compressional Alfv'en waves (Grad-Shafranov equilibrium, ion radial force balance); sound waves (pressure constant along field lines, incompressible flows within a flux surface); and ion collisions (damping of poloidal flow). Radial particle fluxes are driven by the many second order in gyroradius toroidal angular torques on the plasma fluid: 7 ambipolar collision-based ones (classical, neoclassical, etc.) and 8 non-ambipolar ones (fluctuation-induced, polarization flows from toroidal rotation transients etc.). The plasma toroidal rotation equation [1] results from setting to zero the net radial current induced by the non-ambipolar fluxes. The radial particle flux consists of the collision-based intrinsically ambipolar fluxes plus the non-ambipolar fluxes evaluated at the ambipolarity-enforcing toroidal plasma rotation (radial electric field). The energy transport equations do not involve an ambipolar constraint and hence are more directly obtained. The resultant transport equations will be presented and contrasted with the usual ones. [4pt] [1] J.D. Callen, A.J. Cole, C.C. Hegna, ``Toroidal Rotation In

  9. Magnetic island formation in tokamaks

    SciTech Connect

    Yoshikawa, S.

    1989-04-01

    The size of a magnetic island created by a perturbing helical field in a tokamak is estimated. A helical equilibrium of a current- carrying plasma is found in a helical coordinate and the helically flowing current in the cylinder that borders the plasma is calculated. From that solution, it is concluded that the helical perturbation of /approximately/10/sup /minus/4/ of the total plasma current is sufficient to cause an island width of approximately 5% of the plasma radius. 6 refs.

  10. Equilibrium Reconstruction in EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Qian, Jinping; Wan, Baonian; L. Lao, L.; Shen, Biao; A. Sabbagh, S.; Sun, Youwen; Liu, Dongmei; Xiao, Bingjia; Ren, Qilong; Gong, Xianzu; Li, Jiangang

    2009-04-01

    Reconstruction of experimental axisymmetric equilibria is an important part of tokamak data analysis. Fourier expansion is applied to reconstruct the vessel current distribution in EFIT code. Benchmarking and testing calculations are performed to evaluate and validate this algorithm. Two cases for circular and non-circular plasma discharges are presented. Fourier expansion used to fit the eddy current is a robust method and the real time EFIT can be introduced to the plasma control system in the coming campaign.

  11. Magnetic confinement experiment. I: Tokamaks

    SciTech Connect

    Goldston, R.J.

    1995-08-01

    Reports were presented at this conference of important advances in all the key areas of experimental tokamak physics: Core Plasma Physics, Divertor and Edge Physics, Heating and Current Drive, and Tokamak Concept Optimization. In the area of Core Plasma Physics, the biggest news was certainly the production of 9.2 MW of fusion power in the Tokamak Fusion Test Reactor, and the observation of unexpectedly favorable performance in DT plasmas. There were also very important advances in the performance of ELM-free H- (and VH-) mode plasmas and in quasi-steady-state ELM`y operation in JT-60U, JET, and DIII-D. In all three devices ELM-free H-modes achieved nT{tau}`s {approximately} 2.5x greater than ELM`ing H-modes, but had not been sustained in quasi-steady-state. Important progress has been made on the understanding of the physical mechanism of the H-mode in DIII-D, and on the operating range in density for the H-mode in Compass and other devices.

  12. Model-based evaluation of the Canberra Hospital Acute Care Surgical Unit : acute care surgery: a case of one size fits all?

    PubMed

    Beardsley, C J; Sandhu, T; Gubicak, S; Srikanth, S V; Galketiya, K P; Piscioneri, F

    2014-05-01

    Surgical services in Australia are under sustained and growing pressure. The global implementation of acute care surgery services has been shown to facilitate the timeliness of acute surgery. The question is: Do acute care surgical units fit major regional centers like ours? The current study coincides with the introduction of a Surgical Assessment and Planning Unit (SAPU) at the Canberra Hospital and compares patient outcomes before vs. after the introduction of the SAPU, using acute appendicitis as the model illness. We reviewed patients presenting to the Canberra Hospital Emergency Department with a preliminary diagnosis of acute appendicitis before vs. after the introduction of an acute care surgical unit. The subjects were 150 patients, ranging in age from 16 to 97 years. The mean time from presentation at casualty to surgical review and the surgical review itself was reduced by 19 and 26 %, respectively (p < 0.05). Time to the operating table and the percentage of after-hours operations were reduced by 8 and 40 %, respectively. There was a significant reduction in the utilization of abdominal ultrasonography after the implementation of the SAPU. The implementation of a SAPU has benefited the management of patients with acute surgical conditions. Ultimately, patient care is enhanced, with patients being reviewed, admitted, and treated earlier.

  13. Leakage of runaway electrons from tokamaks

    SciTech Connect

    Wong, K.L.

    1982-02-01

    Runaway electron orbits are calculated in a tokamak magnetic field. It is shown that these electrons tend to drift towards a larger major radius with a velocity v Vector/sub R/ = qcE/B/sub 0/ R. This effect may be relevant to some recent experimental observations in tokamaks.

  14. Numerical tokamak turbulence project (OFES grand challenge)

    SciTech Connect

    Beer, M; Cohen, B I; Crotinger, J; Dawson, J; Decyk, V; Dimits, A M; Dorland, W D; Hammett, G W; Kerbel, G D; Leboeuf, J N; Lee, W W; Lin, Z; Nevins, W M; Reynders, J; Shumaker, D E; Smith, S; Sydora, R; Waltz, R E; Williams, T

    1999-08-27

    The primary research objective of the Numerical Tokamak Turbulence Project (NTTP) is to develop a predictive ability in modeling turbulent transport due to drift-type instabilities in the core of tokamak fusion experiments, through the use of three-dimensional kinetic and fluid simulations and the derivation of reduced models.

  15. Natural current profiles in a tokamak

    SciTech Connect

    Taylor, J.B.

    1990-08-01

    In this paper I show how one may arrive at a universal, or natural, family of Tokamak profiles using only accepted physical principles. These particular profiles are similar to ones proposed previously on the basis of ad hoc variational principles and the point of the present paper is to provide a justification for them. However in addition, the present work provides an interesting view of Tokamak fluctuations and leads to a new result -- a relationship between the inward particle pinch velocity, the diffusion coefficient and the current profile. The basic Tokamak model is described in this paper. Then an analogy is developed between Tokamak profiles and the equilibrium of a realisable dynamical system. Then the equations governing the natural Tokamak profiles are derived by applying standard statistical mechanics to this analog. The profiles themselves are calculated and some other results of the theory are described.

  16. Linear optimal control of tokamak fusion devices

    SciTech Connect

    Kessel, C.E.; Firestone, M.A.; Conn, R.W.

    1989-05-01

    The control of plasma position, shape and current in a tokamak fusion reactor is examined using linear optimal control. These advanced tokamaks are characterized by non up-down symmetric coils and structure, thick structure surrounding the plasma, eddy currents, shaped plasmas, superconducting coils, vertically unstable plasmas, and hybrid function coils providing ohmic heating, vertical field, radial field, and shaping field. Models of the electromagnetic environment in a tokamak are derived and used to construct control gains that are tested in nonlinear simulations with initial perturbations. The issues of applying linear optimal control to advanced tokamaks are addressed, including complex equilibrium control, choice of cost functional weights, the coil voltage limit, discrete control, and order reduction. Results indicate that the linear optimal control is a feasible technique for controlling advanced tokamaks where the more common classical control will be severely strained or will not work. 28 refs., 13 figs.

  17. Transport equations in tokamak plasmas

    SciTech Connect

    Callen, J. D.; Hegna, C. C.; Cole, A. J.

    2010-05-15

    Tokamak plasma transport equations are usually obtained by flux surface averaging the collisional Braginskii equations. However, tokamak plasmas are not in collisional regimes. Also, ad hoc terms are added for neoclassical effects on the parallel Ohm's law, fluctuation-induced transport, heating, current-drive and flow sources and sinks, small magnetic field nonaxisymmetries, magnetic field transients, etc. A set of self-consistent second order in gyroradius fluid-moment-based transport equations for nearly axisymmetric tokamak plasmas has been developed using a kinetic-based approach. The derivation uses neoclassical-based parallel viscous force closures, and includes all the effects noted above. Plasma processes on successive time scales and constraints they impose are considered sequentially: compressional Alfven waves (Grad-Shafranov equilibrium, ion radial force balance), sound waves (pressure constant along field lines, incompressible flows within a flux surface), and collisions (electrons, parallel Ohm's law; ions, damping of poloidal flow). Radial particle fluxes are driven by the many second order in gyroradius toroidal angular torques on a plasma species: seven ambipolar collision-based ones (classical, neoclassical, etc.) and eight nonambipolar ones (fluctuation-induced, polarization flows from toroidal rotation transients, etc.). The plasma toroidal rotation equation results from setting to zero the net radial current induced by the nonambipolar fluxes. The radial particle flux consists of the collision-based intrinsically ambipolar fluxes plus the nonambipolar fluxes evaluated at the ambipolarity-enforcing toroidal plasma rotation (radial electric field). The energy transport equations do not involve an ambipolar constraint and hence are more directly obtained. The 'mean field' effects of microturbulence on the parallel Ohm's law, poloidal ion flow, particle fluxes, and toroidal momentum and energy transport are all included self-consistently. The

  18. The Microwave Tokamak Experiment (MTX)

    SciTech Connect

    Thomassen, K.I.; Cohen, B.I.; Hooper, E.B.; Lang, D.D.; Nevins, W.M.

    1987-10-02

    A new experimental facility is being assembled at the Lawrence Livermore National Laboratory (LLNL) for studying microwave propagation and absorption in high density plasmas. A unique feature of the facility is the free electron laser (FEL) used to generate high peak power microwaves at 250 GHz, at a repetition rate so as to produce up to 2 MW of average power for up to 30 s. Called the Microwave Tokamak Experiment (MTX), the facility will be used for studies of plasma heating, current drive, and confinement.

  19. Alpha particle confinement in tokamaks

    SciTech Connect

    White, R.B.; Mynick, H.E.

    1988-11-01

    An assessment of diffusive tokamak transport mechanisms of concern for alpha particles indicates that the ''stochastic regime'' is the only one which appears to pose a real danger for adequate alpha confinement. This fact, in conjunction with the threshold character of that mechanism, allows one to decide whether an alpha born at a given location will be lost or confined, according to a very simple criterion. Implementing this criterion numerically results in a new code for the assessment of alpha confinement, which is orders of magnitude faster than earlier codes used for this purpose. 13 refs., 3 figs., 1 tab.

  20. Breakdown in the pretext tokamak

    SciTech Connect

    Benesch, J.F.

    1981-06-01

    Data are presented on the application of ion cyclotron resonance RF power to preionization in tokamaks. We applied 0.3-3 kW at 12 MHz to hydrogen and obtained a visible discharge, but found no scaling of breakdown voltage with any parameter we were able to vary. A possible explanation for this, which implies that higher RF power would have been much more effective, is discussed. Finally, we present our investigation of the dV/dt dependence of breakdown voltage in PRETEXT, a phenomenon also seen in JFT-2. The breakdown is discussed in terms of the physics of Townsend discharges.

  1. Noniterative reconstruction of tokamak equilibria

    NASA Astrophysics Data System (ADS)

    Rodrigues, Paulo; Bizarro, João P. S.

    2009-02-01

    Unlike iterative approaches, noniterative equilibria reconstruction schemes are designed to keep two measured internal profiles fixed along a given chord while solving a sequence of linear differential equations, providing a unique and asymptotic solution to the Grad-Shafranov (GS) equation directly in laboratory coordinates. A noniterative algorithm is extended to handle plasma configurations that are not symmetric with respect to the tokamak midplane and then used to compute an equilibrium solution from an actual experimental data set. A number of issues concerning how available experimental data can be handled and provided as input to the GS solver in practical situations are also discussed.

  2. Tokamak Physics Experiment divertor design

    SciTech Connect

    Anderson, P.M.

    1995-12-31

    The Tokamak Physics Experiment (TPX) tokamak requires a symmetric up/down double-null divertor capable of operation with steady-state heat flux as high as 7.5 MW/m{sup 2}. The divertor is designed to operate in the radiative mode and employs a deep slot configuration with gas puffing lines to enhance radiative divertor operation. Pumping is provided by cryopumps that pump through eight vertical ports in the floor and ceiling of the vessel. The plasma facing surface is made of carbon-carbon composite blocks (macroblocks) bonded to multiple parallel copper tubes oriented vertically. Water flowing at 6 m/s is used, with the critical heat flux (CHF) margin improved by the use of enhanced heat transfer surfaces. In order to extend the operating period where hands on maintenance is allowed and to also reduce dismantling and disposal costs, the TPX design emphasizes the use of low activation materials. The primary materials used in the divertor are titanium, copper, and carbon-carbon composite. The low activation material selection and the planned physics operation will allow personnel access into the vacuum vessel for the first 2 years of operation. The remote handling system requires that all plasma facing components (PFCs) are configured as modular components of restricted dimensions with special provisions for lifting, alignment, mounting, attachment, and connection of cooling lines, and instrumentation and diagnostics services.

  3. Predictive Modeling of Tokamak Configurations*

    NASA Astrophysics Data System (ADS)

    Casper, T. A.; Lodestro, L. L.; Pearlstein, L. D.; Bulmer, R. H.; Jong, R. A.; Kaiser, T. B.; Moller, J. M.

    2001-10-01

    The Corsica code provides comprehensive toroidal plasma simulation and design capabilities with current applications [1] to tokamak, reversed field pinch (RFP) and spheromak configurations. It calculates fixed and free boundary equilibria coupled to Ohm's law, sources, transport models and MHD stability modules. We are exploring operations scenarios for both the DIII-D and KSTAR tokamaks. We will present simulations of the effects of electron cyclotron heating (ECH) and current drive (ECCD) relevant to the Quiescent Double Barrier (QDB) regime on DIII-D exploring long pulse operation issues. KSTAR simulations using ECH/ECCD in negative central shear configurations explore evolution to steady state while shape evolution studies during current ramp up using a hyper-resistivity model investigate startup scenarios and limitations. Studies of high bootstrap fraction operation stimulated by recent ECH/ECCD experiments on DIIID will also be presented. [1] Pearlstein, L.D., et al, Predictive Modeling of Axisymmetric Toroidal Configurations, 28th EPS Conference on Controlled Fusion and Plasma Physics, Madeira, Portugal, June 18-22, 2001. * Work performed under the auspices of the U.S. Department of Energy by the University of California, Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48.

  4. Theoretical Transport Model for Tokamaks

    NASA Astrophysics Data System (ADS)

    Ghanem, Elsayed Mohammad

    In the present thesis work a theoretical transport model is suggested to study the anomalous transport of plasma particles and energy across the axisymmetric equilibrium toroidal magnetic flux surfaces in tokamaks. The model suggests a linear combination of two transport mechanisms; drift waves, which dominate the transport in the core region, and resistive ballooning modes, which dominate the transport in the edge region. The resulting unified model has been used in a predictive transport code to simulate the plasma transport in different tokamak experiments operating in both the ohmic heating phase and the low confinement mode (L-mode). For ohmic plasma, the model was used to study the saturation of energy confinement time at high plasma density. The effect of the resistive ballooning mode as a possible cause of the saturation phenomena has been investigated together with the effect of the ion temperature gradient mode. For the low confinement mode plasmas, the study has emphasized on using the model to obtain a scaling law for the energy confinement time with the various plasma parameters compared to the scaling laws that are derived based on fitting the experimental data.

  5. Superconducting magnet system for the TPX Tokamak

    NASA Astrophysics Data System (ADS)

    Hassenzahl, W. V.; Chaplin, M. R.; Heim, J. R.; Lang, D. D.; O'Connor, T. G.; Slack, D. S.; Wong, R. L.; Zbasnik, J. P.; Brown, T. G.; Citrolo, J. C.

    1994-07-01

    The Tokamak Physics Experiment (TPX) will be the first Tokamak using superconducting magnets for both the poloidal and toroidal field. It is designed for advanced Tokamak physics experiments in steady-state and long-pulse operation. The TPX superconducting magnets use an advanced cable-in-conduit conductor (CICC) design similar to that developed in support of the International Thermonuclear Experimental Reactor (ITER). The toroidal field magnets provide 4.0 T at 2.25 m with a stored energy of 1.05 GJ. The poloidal field magnets provide 18.0 V-s to ohmically start and control long burns of a 2.0 MA plasma.

  6. Superconducting magnet system for the TPX Tokamak

    SciTech Connect

    Hassenzahl, W.V.; Chaplin, M.R.; Heim, J.R.

    1993-09-15

    The Tokamak Physics Experiment (TPX) will be the first Tokamak using superconducting magnets for both the poloidal and toroidal field. It is designed for advanced Tokamak physics experiments in steady-state and long-pulse operation. The TPX superconducting magnets use an advanced cable-in-conduit conductor (CICC) design similar to that developed in support of the International Thermonuclear Experimental Reactor (ITER). The toroidal field magnets provide 4.0 T at 2.25 m with a stored energy of 1.05 GJ. The poloidal field magnets provide 18.0 V-s to ohmically start and control long burns of a 2.0 MA plasma.

  7. Superconducting magnet system for the TPX Tokamak

    SciTech Connect

    Hassenzahl, W.V.; Chaplin, M.R.; Heim, J.R.

    1994-07-01

    The Tokamak Physics Experiment (TPX) will be the first Tokamak using superconducting magnets for both the poloidal and toroidal field. It is designed for advanced Tokamak physics experiments in steady-state and long-pulse operation. The TPC superconducting magnets use an advanced cable-in-conduit conductor (CICC) design similar to that developed in support of the International Thermonuclear Experimental Reactor (ITER). The toroidal field magnets provide 4.0 T at 2.25 m with a stored energy of 1.05 GJ. The poloidal field magnets provide 18.0 V-s to ohmically start and control long burns of a 2.0 MA plasma.

  8. OPTIMUM PLASMA STATES FOR NEXT STEP TOKAMAKS

    SciTech Connect

    LIN-LIU,YR; STAMBAUGH,RD

    2002-11-01

    OAK A271 OPTIMUM PLASMA STATES FOR NEXT STEP TOKAMAKS. The dependence of the ideal ballooning {beta} limit on aspect ratio, A, and elongation {kappa} is systematically explored for nearly 100% bootstrap current driven tokamak equilibria in a wide range of the shape parameters (A = 1.2-7.0, {kappa} = 1.5-6.0 with triangularity {delta} = 0.5). The critical {beta}{sub N} is shown to be optimal at {kappa} = 3.0-4.0 for all A studied and increases as A decreases with a dependence close to A{sup -0.5}. The results obtained can be used as a theoretical basis for the choice of optimum aspect ratio and elongation of next step burning plasma tokamaks or tokamak reactors.

  9. Control of Dust Inventory in Tokamaks

    SciTech Connect

    Rosanvallon, S.; Grisolia, C.; Andrew, P.; Ciattaglia, S.; Pitcher, C. S.; Taylor, N.; Furlan, J.

    2008-09-07

    Particles with sizes ranging from 100 nm to 100 {mu}m are produced in tokamaks by the interaction of the plasma with the first wall materials and divertor. Dust has not yet been of a major concern in existing tokamaks mainly because their quantities are small and these devices are not nuclear facilities. However, in ITER and in future reactors, they could represent operational and potential safety issues. The aim of this paper is thus to describe the dust creation processes in the tokamak environment. The diagnostics and removal techniques that are needed to be implemented to measure and minimise the dust inventory are also presented. The integration of these techniques into a tokamak environment is also discussed.

  10. Active tokamak limiters; symmetrizing the edge plasma

    SciTech Connect

    Motley, R.W.

    1981-02-01

    The surface layers of tokamak plasmas are strongly unstable to low frequency oscillations. The limiter, by imposing a non-axisymmetric state in the plasma scrape-off layer, may be the source of the free energy driving the instabilities. An active, two-faced sandwich limiter is proposed to symmetrize the scrape-off layer, thereby minimizing the mismatch between the inner and outer tokamak states.

  11. D-D tokamak reactor studies

    SciTech Connect

    Evans, K.E. Jr.; Baker, C.C.; Brooks, J.N.; Ehst, D.A.; Finn, P.A.; Jung, J.; Mattas, R.F.; Misra, B.; Smith, D.L.; Stevens, H.C.

    1980-11-01

    A tokamak D-D reactor design, utilizing the advantages of a deuterium-fueled reactor but with parameters not unnecessarily extended from existing D-T designs, is presented. Studies leading to the choice of a design and initial studies of the design are described. The studies are in the areas of plasma engineering, first-wall/blanket/shield design, magnet design, and tritium/fuel/vacuum requirements. Conclusions concerning D-D tokamak reactors are stated.

  12. Burn Control Mechanisms in Tokamaks

    NASA Astrophysics Data System (ADS)

    Hill, M. A.; Stacey, W. M.

    2015-11-01

    Burn control and passive safety in accident scenarios will be an important design consideration in future tokamak reactors, in particular fusion-fission hybrid reactors, e.g. the Subcritical Advanced Burner Reactor. We are developing a burning plasma dynamics code to explore various aspects of burn control, with the intent to identify feedback mechanisms that would prevent power excursions. This code solves the coupled set of global density and temperature equations, using scaling relations from experimental fits. Predictions of densities and temperatures have been benchmarked against DIII-D data. We are examining several potential feedback mechanisms to limit power excursions: i) ion-orbit loss, ii) thermal instability density limits, iii) MHD instability limits, iv) the degradation of alpha-particle confinement, v) modifications to the radial current profile, vi) ``divertor choking'' and vii) Type 1 ELMs. Work supported by the US DOE under DE-FG02-00ER54538, DE-FC02-04ER54698.

  13. Do spherical tokamaks have a thermonuclear future?

    NASA Astrophysics Data System (ADS)

    Mirnov, S. V.

    2012-12-01

    This work has been initiated by the publication of a review by B.V.Kuteev et al., "Intense Fusion Neutron Sources" [Plasma Physics Reports 36, 281 (2010)]. It is stated that the key thesis of the above review that a spherical tokamak can be recommended for research neutron sources and for demonstration hybrid systems as an alternative to expensive "classical" tokamaks of the JET and ITER type is inconsistent. The analysis of the experimental material obtained during the last 10 years in the course of studies on the existing spherical tokamaks shows that the TIN-ST fusion neutron source spherical tokamak proposed by the authors of the review and intended, according to the authors' opinion, to replace "monsters" in view of its table-top dimensions (2 m3) and laboratory-level energetics cannot be transformed into any noticeable stationary megawatt-power neutron source competing with the existing classical tokamaks (in particular, with JET with its quasi-steady DT fusion power at a level of 5 MW). Namely, the maximum plasma current in the proposed tokamak will be not 3 MA, as the authors suppose erroneously, but, according to the present-day practice of spherical tokamaks, within 0.6-0.7 MA, which will lead to a reduction on the neutron flux by two to three orders of magnitude from the expected 5 MW. The possibility of the maintenance of the stationary process itself even in such a "weakened" spherical tokamak is very doubtful. The experience of the largest existing devices of this type (such as NSTX and MAST) has shown that they are incapable of operating even in a quasi-steady operating mode, because the discharge in them is spontaneously interrupted about 1 s after the beginning of the current pulse, although its expected duration is of up to 5 s. The nature of this phenomenon is the subject of further study of the physics of spherical tokamaks. This work deals with a critical analysis of the available experimental data concerning such tokamaks and a discussion of

  14. Mission and physics design of the Tokamak Physics Experiment

    SciTech Connect

    Neilson, G.H.; Batchelor, D.B.; Mioduszewski, P.K.; Strickler, D.J.; Bonoli, P.T.; Porkolab, M.; Goldston, R.J.; Jardin, S.C.; Bialek, J.M.; Kessel, C.E.

    1994-11-01

    Improvements in the confinement, stability limits, current-drive efficiency and divertor performance, combined with steady-state operation, can lead to a more economical tokamak fusion reactor than one based on the present physics data base. The Tokamak Physics Experiment (TPX) is planned to extend the recent advances in these areas, achieved in pulsed tokamaks, to the steady-state regime. In so doing, it will develop a data base needed for the design of an economically attractive tokamak reactor.

  15. Plasma Physics Regimes in Tokamaks with Li Walls

    SciTech Connect

    L.E. Zakharo; N.N. Gorelenkov; R.B. White; S.I. Krasheninnikov; G.V. Pereverzev

    2003-08-21

    Low recycling regimes with a plasma limited by a lithium wall surface suggest enhanced stability and energy confinement, both necessary for tokamak reactors. These regimes could make ignition feasible in compact tokamaks. Ignited Spherical Tokamaks (IST), self-sufficient in the bootstrap current, are introduced as a necessary step for development of the physics and technology of power reactors.

  16. Bifurcated helical core equilibrium states in tokamaks

    NASA Astrophysics Data System (ADS)

    Cooper, W. A.; Chapman, I. T.; Schmitz, O.; Turnbull, A. D.; Tobias, B. J.; Lazarus, E. A.; Turco, F.; Lanctot, M. J.; Evans, T. E.; Graves, J. P.; Brunetti, D.; Pfefferlé, D.; Reimerdes, H.; Sauter, O.; Halpern, F. D.; Tran, T. M.; Coda, S.; Duval, B. P.; Labit, B.; Pochelon, A.; Turnyanskiy, M. R.; Lao, L.; Luce, T. C.; Buttery, R.; Ferron, J. R.; Hollmann, E. M.; Petty, C. C.; van Zeeland, M.; Fenstermacher, M. E.; Hanson, J. M.; Lütjens, H.

    2013-07-01

    Tokamaks with weak to moderate reversed central shear in which the minimum inverse rotational transform (safety factor) qmin is in the neighbourhood of unity can trigger bifurcated magnetohydrodynamic equilibrium states, one of which is similar to a saturated ideal internal kink mode. Peaked prescribed pressure profiles reproduce the ‘snake’ structures observed in many tokamaks which has led to a novel explanation of the snake as a bifurcated equilibrium state. Snake equilibrium structures are computed in simulations of the tokamak à configuration variable (TCV), DIII-D and mega amp spherical torus (MAST) tokamaks. The internal helical deformations only weakly modulate the plasma-vacuum interface which is more sensitive to ripple and resonant magnetic perturbations. On the other hand, the external perturbations do not alter the helical core deformation in a significant manner. The confinement of fast particles in MAST simulations deteriorate with the amplitude of the helical core distortion. These three-dimensional bifurcated solutions constitute a paradigm shift that motivates the applications of tools developed for stellarator research in tokamak physics investigations.

  17. Tokamak x ray diagnostic instrumentation

    SciTech Connect

    Hill, K.W.; Beiersdorfer, P.; Bitter, M.; Fredrickson, E.; Von Goeler, S.; Hsuan, H.; Johnson, L.C.; Liew, S.L.; McGuire, K.; Pare, V.

    1987-01-01

    Three classes of x-ray diagnostic instruments enable measurement of a variety of tokamak physics parameters from different features of the x-ray emission spectrum. (1) The soft x-ray (1 to 50 keV) pulse-height-analysis (PHA) diagnostic measures impurity concentrations from characteristic line intensities and the continuum enhancement, and measures the electron temperature from the continuum slope. (2) The Bragg x-ray crystal spectrometer (XCS) measures the ion temperature and neutral-beam-induced toroidal rotation velocity from the Doppler broadening and wavelength shift, respectively, of spectral lines of medium-Z impurity ions. Impurity charge state distributions, precise wavelengths, and inner-shell excitation and recombination rates can also be studied. X rays are diffracted and focused by a bent crystal onto a position-sensitive detector. The spectral resolving power E/..delta..E is greater than 10/sup 4/ and time resolution is 10 ms. (3) The x-ray imaging system (XIS) measures the spatial structure of rapid fluctuations (0.1 to 100 kHZ) providing information on MHD phenomena, impurity transport rates, toroidal rotation velocity, plasma position, and the electron temperature profile. It uses an array of silicon surface-barrier diodes which view different chords of the plasma through a common slot aperture and operate in current (as opposed to counting) mode. The effectiveness of shields to protect detectors from fusion-neutron radiation effects has been studied both theoretically and experimentally.

  18. Intrinsic rotation in tokamaks: theory

    NASA Astrophysics Data System (ADS)

    Parra, Felix I.; Barnes, Michael

    2015-04-01

    Self-consistent equations for intrinsic rotation in tokamaks with small poloidal magnetic field Bp compared to the total magnetic field B are derived. The model gives the momentum redistribution due to turbulence, collisional transport and energy injection. Intrinsic rotation is determined by the balance between the momentum redistribution and the turbulent diffusion and convection. Two different turbulence regimes are considered: turbulence with characteristic perpendicular lengths of the order of the ion gyroradius, ρi, and turbulence with characteristic lengths of the order of the poloidal gyroradius, (B/Bp)ρi. Intrinsic rotation driven by gyroradius scale turbulence is mainly due to the effect of neoclassical corrections and of finite orbit widths on turbulent momentum transport, whereas for the intrinsic rotation driven by poloidal gyroradius scale turbulence, the slow variation of turbulence characteristics in the radial and poloidal directions and the turbulent particle acceleration can be become as important as the neoclassical and finite orbit width effects. The magnetic drift is shown to be indispensable for the intrinsic rotation driven by the slow variation of turbulence characteristics and the turbulent particle acceleration. The equations are written in a form conducive to implementation in a flux tube code, and the effect of the radial variation of the turbulence is included in a novel way that does not require a global gyrokinetic formalism.

  19. Microtearing modes in tokamak discharges

    NASA Astrophysics Data System (ADS)

    Rafiq, T.; Weiland, J.; Kritz, A. H.; Luo, L.; Pankin, A. Y.

    2016-06-01

    Microtearing modes (MTMs) have been identified as a source of significant electron thermal transport in tokamak discharges. In order to describe the evolution of these discharges, it is necessary to improve the prediction of electron thermal transport. This can be accomplished by utilizing a model for transport driven by MTMs in whole device predictive modeling codes. The objective of this paper is to develop the dispersion relation that governs the MTM driven transport. A unified fluid/kinetic approach is used in the development of a nonlinear dispersion relation for MTMs. The derivation includes the effects of electrostatic and magnetic fluctuations, arbitrary electron-ion collisionality, electron temperature and density gradients, magnetic curvature, and the effects associated with the parallel propagation vector. An iterative nonlinear approach is used to calculate the distribution function employed in obtaining the nonlinear parallel current and the nonlinear dispersion relation. The third order nonlinear effects in magnetic fluctuations are included, and the influence of third order effects on a multi-wave system is considered. An envelope equation for the nonlinear microtearing modes in the collision dominant limit is introduced in order to obtain the saturation level. In the limit that the mode amplitude does not vary along the field line, slab geometry, and strong collisionality, the fluid dispersion relation for nonlinear microtearing modes is found to agree with the kinetic dispersion relation.

  20. Microtearing modes in tokamak discharges

    SciTech Connect

    Rafiq, T.; Kritz, A. H.; Weiland, J.; Luo, L.; Pankin, A. Y.

    2016-06-15

    Microtearing modes (MTMs) have been identified as a source of significant electron thermal transport in tokamak discharges. In order to describe the evolution of these discharges, it is necessary to improve the prediction of electron thermal transport. This can be accomplished by utilizing a model for transport driven by MTMs in whole device predictive modeling codes. The objective of this paper is to develop the dispersion relation that governs the MTM driven transport. A unified fluid/kinetic approach is used in the development of a nonlinear dispersion relation for MTMs. The derivation includes the effects of electrostatic and magnetic fluctuations, arbitrary electron-ion collisionality, electron temperature and density gradients, magnetic curvature, and the effects associated with the parallel propagation vector. An iterative nonlinear approach is used to calculate the distribution function employed in obtaining the nonlinear parallel current and the nonlinear dispersion relation. The third order nonlinear effects in magnetic fluctuations are included, and the influence of third order effects on a multi-wave system is considered. An envelope equation for the nonlinear microtearing modes in the collision dominant limit is introduced in order to obtain the saturation level. In the limit that the mode amplitude does not vary along the field line, slab geometry, and strong collisionality, the fluid dispersion relation for nonlinear microtearing modes is found to agree with the kinetic dispersion relation.

  1. Toroidal Flow in Tokamak Plasmas

    NASA Astrophysics Data System (ADS)

    Callen, J. D.; Cole, A. J.; Hegna, C. C.

    2007-11-01

    Many effects influence toroidal flow evolution in tokamak plasmas. Momentum sources and radial diffusion due to axisymmetric neoclassical, paleoclassical and anomalous transport are usually considered. In addition, the toroidal flow can be affected by field errors. Small, non-axisymmetric field errors arise from coil irregularities, active control coils and collective plasma magnetic distortions (e.g., NTMs, RWMs). Resonant field errors cause localized electromagnetic torques near rational surfaces in the plasma, which can lock the plasma to the wall leading to magnetic islands and reduced confinement or disruptions. Their penetration into the plasma is limited by flow-shielding effects; but they can be amplified by the plasma response at high beta. Non-resonant field errors cause magnetic pumping and radial banana drifts, and lead to toroidal flow damping over the entire plasma. Many of these processes can also produce momentum pinch and intrinsic flow effects. This poster will seek to present a coherent picture of all these effects and suggest ways they could be tested and distinguished experimentally.

  2. Dust in tokamaks: An overview of the physical model of the dust in tokamaks code

    NASA Astrophysics Data System (ADS)

    Bacharis, Minas; Coppins, Michael; Allen, John E.

    2010-04-01

    The dynamical behavior of dust produced in tokamaks is an important issue for fusion. In this work, the current status of the dust in tokamaks (DTOKS) [J. D. Martin et al., Europhys Lett. 83, 65001 (2008)] dust transport code will be presented. A detailed description of the various elements of its underlying physical model will be given together with representative simulation results for the mega amp spherical tokamak (MAST) [A. Sykes et al., Nucl. Fusion 41, 1423 (2001)]. Furthermore, a brief description of the various components of the dust transport (DUSTT) [R. D. Smirnov et al., Plasma Phys. Controlled Fusion 49, 347 (2007)] code will also be presented in comparison with DTOKS.

  3. Activation analysis of the compact ignition tokamak

    SciTech Connect

    Selcow, E.C.

    1986-01-01

    The US fusion program has completed the conceptual design of a compact tokamak device that achieves ignition. The high neutron wall loadings associated with this compact deuterium-tritium-burning device indicate that radiation-related issues may be significant considerations in the overall system design. Sufficient shielding will be requied for the radiation protection of both reactor components and occupational personnel. A close-in igloo shield has been designed around the periphery of the tokamak structure to permit personnel access into the test cell after shutdown and limit the total activation of the test cell components. This paper describes the conceptual design of the igloo shield system and discusses the major neutronic concerns related to the design of the Compact Ignition Tokamak.

  4. Helicity content and tokamak applications of helicity

    SciTech Connect

    Boozer, A.H.

    1986-05-01

    Magnetic helicity is approximately conserved by the turbulence associated with resistive instabilities of plasmas. To generalize the application of the concept of helicity, the helicity content of an arbitrary bounded region of space will be defined. The definition has the virtues that both the helicity content and its time derivative have simple expressions in terms of the poloidal and toroidal magnetic fluxes, the average toroidal loop voltage and the electric potential on the bounding surface, and the volume integral of E-B. The application of the helicity concept to tokamak plasmas is illustrated by a discussion of so-called MHD current drive, an example of a stable tokamak q profile with q less than one in the center, and a discussion of the possibility of a natural steady-state tokamak due to the bootstrap current coupling to tearing instabilities.

  5. Physics of Tokamak Plasma Start-up

    NASA Astrophysics Data System (ADS)

    Mueller, Dennis

    2012-10-01

    This tutorial describes and reviews the state-of-art in tokamak plasma start-up and its importance to next step devices such as ITER, a Fusion Nuclear Science Facility and a Tokamak/ST demo. Tokamak plasma start-up includes breakdown of the initial gas, ramp-up of the plasma current to its final value and the control of plasma parameters during those phases. Tokamaks rely on an inductive component, typically a central solenoid, which has enabled attainment of high performance levels that has enabled the construction of the ITER device. Optimizing the inductive start-up phase continues to be an area of active research, especially in regards to achieving ITER scenarios. A new generation of superconducting tokamaks, EAST and KSTAR, experiments on DIII-D and operation with JET's ITER-like wall are contributing towards this effort. Inductive start-up relies on transformer action to generate a toroidal loop voltage and successful start-up is determined by gas breakdown, avalanche physics and plasma-wall interaction. The goal of achieving steady-sate tokamak operation has motivated interest in other methods for start-up that do not rely on the central solenoid. These include Coaxial Helicity Injection, outer poloidal field coil start-up, and point source helicity injection, which have achieved 200, 150 and 100 kA respectively of toroidal current on closed flux surfaces. Other methods including merging reconnection startup and Electron Bernstein Wave (EBW) plasma start-up are being studied on various devices. EBW start-up generates a directed electron channel due to wave particle interaction physics while the other methods mentioned rely on magnetic helicity injection and magnetic reconnection which are being modeled and understood using NIMROD code simulations.

  6. Current drive by spheromak injection into a tokamak

    NASA Astrophysics Data System (ADS)

    Brown, M. R.; Bellan, P. M.

    1990-04-01

    We report the first observation of current drive by injection of a spheromak plasma into a tokamak (Caltech ENCORE small reasearch tokamak) due to the process of helicity injection. After an abrupt 30% increase, the tokamak current decays by a factor of 3 due to plasma cooling caused by the merging of the relatively cold spheromak with the tokamak. The tokamak density profile peaks sharply due to the injected spheromak plasma (n¯3 increases by a factor of 6) then becomes hollow, suggestive of an interchange instability.

  7. Electron cyclotron emission diagnostics on KSTAR tokamak

    SciTech Connect

    Jeong, S. H.; Lee, K. D.; Kwon, M.; Kogi, Y.; Kawahata, K.; Nagayama, Y.; Mase, A.

    2010-10-15

    A new electron cyclotron emission (ECE) diagnostics system was installed for the Second Korea Superconducting Tokamak Advanced Research (KSTAR) campaign. The new ECE system consists of an ECE collecting optics system, an overmode circular corrugated waveguide system, and 48 channel heterodyne radiometer with the frequency range of 110-162 GHz. During the 2 T operation of the KSTAR tokamak, the electron temperatures as well as its radial profiles at the high field side were measured and sawtooth phenomena were also observed. We also discuss the effect of a window on in situ calibration.

  8. Overview of the National Centralized Tokamak programme

    NASA Astrophysics Data System (ADS)

    Kikuchi, M.; Tamai, H.; Matsukawa, M.; Fujita, T.; Takase, Y.; Sakurai, S.; Kizu, K.; Tsuchiya, K.; Kurita, G.; Morioka, A.; Hayashi, N.; Miura, Y.; Itoh, S.; Bialek, J.; Navratil, G.; Ikeda, Y.; Fujii, T.; Kurihara, K.; Kubo, H.; Kamada, Y.; Miya, N.; Suzuki, T.; Hamamatsu, K.; Kawashima, H.; Kudo, Y.; Masaki, K.; Takahashi, H.; Takechi, M.; Akiba, M.; Okuno, K.; Ishida, S.; Ichimura, M.; Imai, T.; Hashizume; Miura, Y. M.; Horiike, H.; Kimura, A.; Tsutsui, H.; Matsuoka, M.; Uesugi, Y.; Sagara, A.; Nishimura, A.; Shimizu, A.; Sakamoto, M.; Nakamura, K.; Sato, K.; Okano, K.; Ida, K.; Shimada, H. R.; Kishimoto, Y.; Azechi, H.; Tanaka, S.; Yatsu, K.; Yoshida, N.; Inutake, M.; Fujiwara, M.; Inoue, N.; Hosogane, N.; Kuriyama, M.; Ninomiya, H.

    2006-03-01

    An overview is given of the National Centralized Tokamak (NCT) programme as a research programme for advanced tokamak research to succeed JT-60U. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility is pursued in aspect ratio and shape controllability for the demonstration of the high-β steady-state, feedback control of resistive wall modes, wide current and pressure profile control capability and also very long pulse steady-state operation. Existing JT-60 infrastructure such as the heating and current drive system, power supplies and cooling systems will be best utilized for this modification.

  9. Overview of spherical tokamak research in Japan

    NASA Astrophysics Data System (ADS)

    Takase, Y.; Ejiri, A.; Fujita, T.; Fukumoto, N.; Fukuyama, A.; Hanada, K.; Idei, H.; Nagata, M.; Ono, Y.; Tanaka, H.; Uchida, M.; Horiuchi, R.; Kamada, Y.; Kasahara, H.; Masuzaki, S.; Nagayama, Y.; Oishi, T.; Saito, K.; Takeiri, Y.; Tsuji-Iio, S.

    2017-10-01

    Nationally coordinated research on spherical tokamak is being conducted in Japan. Recent achievements include: (i) plasma current start-up and ramp-up without the use of the central solenoid by RF waves (in electron cyclotron and lower hybrid frequency ranges), (ii) plasma current start-up by AC Ohmic operation and by coaxial helicity injection, (iii) development of an advanced fuelling technique by compact toroid injection, (iv) ultra-long-pulse operation and particle control using a high temperature metal wall, (v) access to the ultra-high-β regime by high-power reconnection heating, and (vi) improvement of spherical tokamak plasma stability by externally applied helical field.

  10. Tokamak power systems studies, FY 1985

    SciTech Connect

    Baker, C.C.; Brooks, J.N.; Ehst, D.A.; Smith, D.L.; Sze, D.K.

    1985-12-01

    The Tokamak Power System Studies (TPSS) at ANL in FY-1985 were devoted to exploring innovative design concepts which have the potential for making substantial improvements in the tokamak as a commercial power reactor. Major objectives of this work included improved reactor economics, improved environmental and safety features, and the exploration of a wide range of reactor plant outputs with emphasis on reduced plant sizes compared to STARFIRE. The activities concentrated on three areas: plasma engineering, impurity control, and blanket/first wall/shield technology. 205 refs., 125 figs., 107 tabs.

  11. Tokamak Spectroscopy for X-Ray Astronomy

    NASA Technical Reports Server (NTRS)

    Fournier, Kevin B.; Finkenthal, M.; Pacella, D.; May, M. J.; Soukhanovskii, V.; Mattioli, M.; Leigheb, M.; Rice, J. E.

    2000-01-01

    This paper presents the measured x-ray and Extreme Ultraviolet (XUV) spectra of three astrophysically abundant elements (Fe, Ca and Ne) from three different tokamak plasmas. In every case, each spectrum touches on an issue of atomic physics that is important for simulation codes to be used in the analysis of high spectral resolution data from current and future x-ray telescopes. The utility of the tokamak as a laboratory test bed for astrophysical data is demonstrated. Simple models generated with the HULLAC suite of codes demonstrate how the atomic physics issues studied can affect the interpretation of astrophysical data.

  12. Transformer Recharging with Alpha Channeling in Tokamaks

    SciTech Connect

    N.J. Fisch

    2009-12-21

    Transformer recharging with lower hybrid waves in tokamaks can give low average auxiliary power if the resistivity is kept high enough during the radio frequency (rf) recharging stage. At the same time, operation in the hot ion mode via alpha channeling increases the effective fusion reactivity. This paper will address the extent to which these two large cost saving steps are compatible. __________________________________________________

  13. Spontaneous generation of rotation in tokamak plasmas

    SciTech Connect

    Parra Diaz, Felix

    2013-12-24

    Three different aspects of intrinsic rotation have been treated. i) A new, first principles model for intrinsic rotation [F.I. Parra, M. Barnes and P.J. Catto, Nucl. Fusion 51, 113001 (2011)] has been implemented in the gyrokinetic code GS2. The results obtained with the code are consistent with several experimental observations, namely the rotation peaking observed after an L-H transition, the rotation reversal observed in Ohmic plasmas, and the change in rotation that follows Lower Hybrid wave injection. ii) The model in [F.I. Parra, M. Barnes and P.J. Catto, Nucl. Fusion 51, 113001 (2011)] has several simplifying assumptions that seem to be satisfied in most tokamaks. To check the importance of these hypotheses, first principles equations that do not rely on these simplifying assumptions have been derived, and a version of these new equations has been implemented in GS2 as well. iii) A tokamak cross-section that drives large intrinsic rotation has been proposed for future large tokamaks. In large tokamaks, intrinsic rotation is expected to be very small unless some up-down asymmetry is introduced. The research conducted under this contract indicates that tilted ellipticity is the most efficient way to drive intrinsic rotation.

  14. INTEGRATED PLASMA CONTROL FOR ADVANCED TOKAMAKS

    SciTech Connect

    HUMPHREYS,D.A; FERRON,J.R; JOHNSON,R.D; LEUER,J.A; PENAFLOR,B.G; WALKER,M.L; WELANDER,A.S; KHAYRUTDINOV,R.R; DOKOUKA,V; EDGELL,D.H; FRANSSON,C.M

    2003-10-01

    OAK-B135 Advanced tokamaks (AT) are distinguished from conventional tokamaks by their high degree of shaping, achievement of profiles optimized for high confinement and stability characteristics, and active stabilization of MHD instabilities to attain high values of normalized beta and confinement. These high performance fusion devices thus require accurate regulation of the plasma boundary, internal profiles, pumping, fueling, and heating, as well as simultaneous and well-coordinated MHD control action to stabilize such instabilities as tearing modes and resistive wall modes. Satisfying the simultaneous demands on control accuracy, reliability, and performance for all of these subsystems requires a high degree of integration in both design and operation of the plasma control system in an advanced tokamak. The present work describes the approach, benefits, and progress made in integrated plasma control with application examples drawn from the DIII-D tokamak. The approach includes construction of plasma and system response models, validation of models against operating experiments, design of integrated controllers which operate in concert with one another as well as with supervisory modules, simulation of control action against off-line and actual machine control platforms, and iteration of the design-test loop to optimize performance.

  15. Simulation of runaway electrons in tokamak

    NASA Astrophysics Data System (ADS)

    Guo, Zehua; Tang, Xianzhu; McDevitt, Chris

    2015-11-01

    Runaway electrons with relativisitc energy (>Mev) are generated in tokamaks when the acceleration by parallel electric field exceeds the drag due to Coulomb collisions with the bulk plasma. Carrying about 70% of the ITER thermal current (15MA), they can possibly cause severe damage to tokamak facing components. Here we report the development of a solver for computing the evolution of runaway electron distribution in tokamak geometries. Essential effects from Coulomb collisions, radiation losses, toroidal effects and the radial transport are included on the same footings. Numerical techniques (implicit-explicit time-stepping, KT/NT central schemes) to overcome the difficulties arising from the wide spread of time scales in runaway electron dynamics and the hyperbolic nature of the relativistic Fokker-Planck equation will be discussed. We will use the solver to study two important physics: 1) the presence of stable point in the phase space and its relation to the electric field threshold; 2) the radial transport of runaways in tokamak geometry and its effects on the distribution function. Work supported by DOE via LANL-LDRD.

  16. Tokamak startup with electron cyclotron heating

    SciTech Connect

    Holly, D J; Prager, S C; Shepard, D A; Sprott, J C

    1980-04-01

    Experiments are described in which the startup voltage in a tokamak is reduced by approx. 60% by the use of a modest amount of electron cyclotron resonance heating power for preionization. A 50% reduction in volt-second requirement and impurity reflux are also observed.

  17. Analysis of sawtooth relaxation oscillations in tokamaks

    SciTech Connect

    Yamazaki, K.; McGuire, K.; Okabayashi, M.

    1982-07-01

    Sawtooth relaxation oscillations are analyzed using the Kadomtsev's disruption model and a thermal relaxation model. The sawtooth period is found to be very sensitive to the thermal conduction loss. Qualitative agreement between these calculations and the sawtooth period observed in several tokamaks is demonstrated.

  18. Banana drift transport in tokamaks with ripple

    SciTech Connect

    Linsker, R.; Boozer, A.H.

    1982-01-01

    Ripple transport in tokamaks is discussed for the ''banana drift'' collisionality regime, which lies below the ripple plateau regime treated earlier. The physical mechanisms that dominate banana drift transport are found to differ from those considered in previous work on this regime, and consequently the resulting transport coefficients can differ by several orders of magnitude.

  19. Banana drift transport in tokamaks with ripple

    SciTech Connect

    Linsker, R.; Boozer, A.H.

    1981-04-01

    Ripple transport in tokamaks is discussed for the banana drift collisionality regime, which lies below the ripple plateau regime treated earlier. The physical mechanisms that dominate banana drift transport are found to differ from those considered in previous work on this regime, and the resulting transport coefficients can consequently differ by several orders of magnitude.

  20. Stabilization of tokamak plasma by lithium streams

    SciTech Connect

    L.E. Zakharov

    2000-08-07

    The stabilization theory of free-boundary magnetohydrodynamic instabilities in tokamaks by liquid lithium streams driven by magnetic propulsion is formulated. While the conventional, wall-locked, resistive wall mode can be well suppressed by the flow, a new, stream-locked mode determines the limits of the flow stabilization.

  1. UCLA Tokamak Program Close Out Report.

    SciTech Connect

    Taylor, Robert John

    2014-02-04

    The results of UCLA experimental fusion program are summarized. Starting with smaller devices like Microtor, Macrotor, CCT and ending the research on the large (5 m) Electric Tokamak. CCT was the most diagnosed device for H-mode like physics and the effects of rotation induced radial fields. ICRF heating was also studied but plasma heating of University Type Tokamaks did not produce useful results due to plasma edge disturbances of the antennae. The Electric Tokamak produced better confinement in the seconds range. However, it presented very good particle confinement due to an "electric particle pinch". This effect prevented us from reaching a quasi steady state. This particle accumulation effect was numerically explained by Shaing's enhanced neoclassical theory. The PI believes that ITER will have a good energy confinement time but deleteriously large particle confinement time and it will disrupt on particle pinching at nominal average densities. The US fusion research program did not study particle transport effects due to its undue focus on the physics of energy confinement time. Energy confinement time is not an issue for energy producing tokamaks. Controlling the ash flow will be very expensive.

  2. Microinstabilities in weak density gradient tokamak systems

    SciTech Connect

    Tang, W.M.; Rewoldt, G.; Chen, L.

    1986-04-01

    A prominent characteristic of auxiliary-heated tokamak discharges which exhibit improved (''H-mode type'') confinement properties is that their density profiles tend to be much flatter over most of the plasma radius. Depsite this favorable trend, it is emphasized here that, even in the limit of zero density gradient, low-frequency microinstabilities can persist due to the nonzero temperature gradient.

  3. Fusion reactor design studies. [ARIES Tokamak

    SciTech Connect

    Emmert, G.A.; Kulcinski, G.L.; Santarius, J.F.

    1990-10-12

    This report discusses the following topics on the ARIES tokamak: systems; plasma power balance; impurity control and fusion ash removal; fusion product ripple loss; energy conversion; reactor fueling; first wall design; shield design; reactor safety; and fuel cost and resources. (LSP)

  4. Elementary Processes Underlying Alpha Channeling in Tokamaks

    SciTech Connect

    NM.J. Fisch

    2012-06-15

    Alpha channeling in tokamaks is speculative, but also extraordinarily attractive. Waves that can accomplish this effect have been identified. Key aspects of the theory now enjoy experimental confirmation. This paper will review the elementary processes of wave-particle interactions in plasma that underlie the alpha channeling effect

  5. Diagnostics for neutral-beam-heated tokamaks

    SciTech Connect

    Goldston, R.J.

    1982-12-01

    Diagnostic techniques for neutral-beam-heated tokamak plasmas fall into three categories: (1) magnetic diagnostics for measurements of gross stored energy, (2) profile diagnostics for measurements of stored thermal and beam energy, impurity content and plasma rotation, and (3) fast time resolution diagnostics to study MHD fluctuations and micro-turbulence.

  6. Burning plasma simulation and environmental assessment of tokamak, spherical tokamak and helical reactors

    NASA Astrophysics Data System (ADS)

    Yamazaki, K.; Uemura, S.; Oishi, T.; Garcia, J.; Arimoto, H.; Shoji, T.

    2009-05-01

    Reference 1-GWe DT reactors (tokamak TR-1, spherical tokamak ST-1 and helical HR-1 reactors) are designed using physics, engineering and cost (PEC) code, and their plasma behaviours with internal transport barrier operations are analysed using toroidal transport analysis linkage (TOTAL) code, which clarifies the requirement of deep penetration of pellet fuelling to realize steady-state advanced burning operation. In addition, economical and environmental assessments were performed using extended PEC code, which shows the advantage of high beta tokamak reactors in the cost of electricity (COE) and the advantage of compact spherical tokamak in life-cycle CO2 emission reduction. Comparing with other electric power generation systems, the COE of the fusion reactor is higher than that of the fission reactor, but on the same level as the oil thermal power system. CO2 reduction can be achieved in fusion reactors the same as in the fission reactor. The energy payback ratio of the high-beta tokamak reactor TR-1 could be higher than that of other systems including the fission reactor.

  7. Neural net prediction of tokamak plasma disruptions

    NASA Astrophysics Data System (ADS)

    Hernandez, J. V.; Lin, Z.; Horton, W.; Vannucci, A.; McCool, S. C.

    1994-10-01

    The computation based on neural net algorithms in predicting minor and major disruptions in TEXT tokamak discharges has been performed. Future values of the fluctuating magnetic signal are predicted based on L past values of the magnetic fluctuation signal, measured by a single Mirnov coil. The time step used (= 0.04ms) corresponds to the experimental data sampling rate. Two kinds of approaches are adopted for the task, the contiguous future prediction and the multi-timescale prediction. Results are shown for comparison. Both networks are trained through the back-propagation algorithm with inertial terms. The degree of this success indicates that the magnetic fluctuations associated with tokamak disruptions may be characterized by a relatively low-dimensional dynamical system.

  8. Global migration of impurities in tokamaks

    NASA Astrophysics Data System (ADS)

    Hakola, A.; Airila, M. I.; Björkas, C.; Borodin, D.; Brezinsek, S.; Coad, J. P.; Groth, M.; Järvinen, A.; Kirschner, A.; Koivuranta, S.; Krieger, K.; Kurki-Suonio, T.; Likonen, J.; Lindholm, V.; Makkonen, T.; Mayer, M.; Miettunen, J.; Müller, H. W.; Neu, R.; Petersson, P.; Rohde, V.; Rubel, M.; Widdowson, A.; the ASDEX Upgrade Team; Contributors, JET-EFDA

    2013-12-01

    The migration of impurities in tokamaks has been studied with the help of tracer-injection (13C and 15N) experiments in JET and ASDEX Upgrade since 2001. We have identified a common pattern for the migrating particles: scrape-off layer flows drive impurities from the low-field side towards the high-field side of the vessel. Migration is also sensitive to the density and magnetic configuration of the plasma, and strong local variations in the resulting deposition patterns require 3D treatment of the migration process. Moreover, re-erosion of the deposited particles has to be taken into account to properly describe the migration process during steady-state operation of the tokamak.

  9. Filamentary probe on the COMPASS tokamak

    NASA Astrophysics Data System (ADS)

    Kovarik, K.; Duran, I.; Stockel, J.; Seidl, J.; Adamek, J.; Spolaore, M.; Vianello, N.; Hacek, P.; Hron, M.; Panek, R.

    2017-03-01

    This paper describes a new filamentary probe recently introduced on the COMPASS tokamak. It allows the measurement of electrostatic and magnetic properties of the filaments and their changes in dependence on distance from the separatrix in the region between a divertor and midplane. The probe head is mounted on a manipulator moving the probe radially on a shot-to-shot basis. This configuration is suitable for the long term statistical measurement of the plasma filaments and the measurement of their evolution during their propagation from the separatrix to the wall. The basics of the filamentary probe construction, the evolution of the plasma parameters, and first conditional averages of the plasma filaments in the scrape-off layer of the COMPASS tokamak during the L-mode regime are presented.

  10. Microtearing modes in spherical and conventional tokamaks

    NASA Astrophysics Data System (ADS)

    Moradi, S.; Pusztai, I.; Guttenfelder, W.; Fülöp, T.; Mollén, A.

    2013-06-01

    The onset and characteristics of microtearing modes (MTM) in the core of spherical (NSTX) and conventional tokamaks (ASDEX Upgrade and JET) are studied through local linear gyrokinetic simulations with GYRO (Candy and Belli 2011 General Atomics Report GA-A26818). For experimentally relevant core plasma parameters in the NSTX and ASDEX Upgrade tokamaks, in agreement with previous works, we find MTMs as the dominant linear instability. Also, for JET-like core parameters considered in our study an MTM is found as the most unstable mode. In all of these plasmas, finite collisionality is needed for MTMs to become unstable and the electron temperature gradient is found to be the fundamental drive. However, a significant difference is observed in the dependence of the linear growth rate of MTMs on electron temperature gradient. While it varies weakly and non-monotonically in JET and ASDEX Upgrade plasmas, in NSTX it increases with the electron temperature gradient.

  11. Rapidly Moving Divertor Plates In A Tokamak

    SciTech Connect

    S. Zweben

    2011-05-16

    It may be possible to replace conventional actively cooled tokamak divertor plates with a set of rapidly moving, passively cooled divertor plates on rails. These plates would absorb the plasma heat flux with their thermal inertia for ~10-30 sec, and would then be removed from the vessel for processing. When outside the tokamak, these plates could be cooled, cleaned, recoated, inspected, and then returned to the vessel in an automated loop. This scheme could provide nearoptimal divertor surfaces at all times, and avoid the need to stop machine operation for repair of damaged or eroded plates. We describe various possible divertor plate designs and access geometries, and discuss an initial design for a movable and removable divertor module for NSTX-U.

  12. Filamentary probe on the COMPASS tokamak.

    PubMed

    Kovarik, K; Duran, I; Stockel, J; Seidl, J; Adamek, J; Spolaore, M; Vianello, N; Hacek, P; Hron, M; Panek, R

    2017-03-01

    This paper describes a new filamentary probe recently introduced on the COMPASS tokamak. It allows the measurement of electrostatic and magnetic properties of the filaments and their changes in dependence on distance from the separatrix in the region between a divertor and midplane. The probe head is mounted on a manipulator moving the probe radially on a shot-to-shot basis. This configuration is suitable for the long term statistical measurement of the plasma filaments and the measurement of their evolution during their propagation from the separatrix to the wall. The basics of the filamentary probe construction, the evolution of the plasma parameters, and first conditional averages of the plasma filaments in the scrape-off layer of the COMPASS tokamak during the L-mode regime are presented.

  13. Models for impurity effects in tokamaks

    SciTech Connect

    Hogan, J.T.

    1980-03-01

    Models for impurity effects in tokamaks are described with an emphasis on the relationship between attainment of high ..beta.. and impurity problems. We briefly describe the status of attempts to employ neutral beam heating to achieve high ..beta.. in tokamaks and propose a qualitative model for the mechanism by which heavy metal impurities may be produced in the startup phase of the discharge. We then describe paradoxes in impurity diffusion theory and discuss possible resolutions in terms of the effects of large-scale islands and sawtooth oscillations. Finally, we examine the prospects for the Zakharov-Shafranov catastrophe (long time scale disintegration of FCT equilibria) in the context of present and near-term experimental capability.

  14. A low aspect ratio tokamak transmutation system

    NASA Astrophysics Data System (ADS)

    Qiu, L. J.; Wu, Y. C.; Xiao, B. J.; Xu, Q.; Huang, Q. Y.; Wu, B.; Chen, Y. X.; Xu, W. N.; Chen, Y. P.; Liu, X. P.

    2000-03-01

    A low aspect ratio tokamak transmutation system is proposed as an alternative application of fusion energy on the basis of a review of previous studies. This system includes: (1) a low aspect ratio tokamak as fusion neutron driver, (2) a radioactivity-clean nuclear power system as blanket, and (3) a novel concept of liquid metal centre conductor post as part of the toroidal field coils. In the conceptual design, a driver of 100 MW fusion power under 1 MW/m2 neutron wall loading can transmute the amount of high level waste (including minor actinides and fission products) produced by ten standard pressurized water reactors of 1 GW electrical power output. Meanwhile, the system can produce tritium on a self-sustaining basis and an output of about 2 GW of electrical energy. After 30 years of operation, the biological hazard potential level of the whole system will decrease by two orders of magnitude.

  15. Boundary Plasma Turbulence Simulations for Tokamaks

    SciTech Connect

    Xu, X; Umansky, M; Dudson, B; Snyder, P

    2008-05-15

    The boundary plasma turbulence code BOUT models tokamak boundary-plasma turbulence in a realistic divertor geometry using modified Braginskii equations for plasma vorticity, density (ni), electron and ion temperature (T{sub e}; T{sub i}) and parallel momenta. The BOUT code solves for the plasma fluid equations in a three dimensional (3D) toroidal segment (or a toroidal wedge), including the region somewhat inside the separatrix and extending into the scrape-off layer; the private flux region is also included. In this paper, a description is given of the sophisticated physical models, innovative numerical algorithms, and modern software design used to simulate edge-plasmas in magnetic fusion energy devices. The BOUT code's unique capabilities and functionality are exemplified via simulations of the impact of plasma density on tokamak edge turbulence and blob dynamics.

  16. The physics of tokamak start-up

    SciTech Connect

    Mueller, D.

    2013-05-15

    Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases, inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. International Thermonuclear Experimental Reactor, the National Spherical Torus Experiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection, and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.

  17. Tritium Retention and Removal in Tokamaks

    SciTech Connect

    Skinner, Charles H.

    2009-02-19

    Management of tritium inventory remains one of the grand challenges in the development of fusion energy. Tritium is an important source term in safety assessments, it is expensive and in short supply. Tritium can be continuously retained in a tokamak by codeposition with eroded carbon or beryllium and JET and TFTR with carbon plasma facing components showed a tritium retention level that would be unacceptable in ITER or future fusion reactors. Asdex-U and Alcator C-mod have shown reduced hydrogenic retention with tungsten clad and molybdenum plasma facing components. Once the tritium inventory approaches the administrative limit, tritium must be removed to permit continued D-T plasma operations. Several candidate techniques are being considered and need to be proven at a relevant speed and efficiency in contemporary tokamaks. Projections for ITER are discussed.

  18. The Physics of Tokamak Start-up

    SciTech Connect

    D. Mueller

    2012-11-13

    Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. ITER, the National Spherical Torus eXperiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.

  19. Magnetohydrodynamic stability of tokamak edge plasmas

    SciTech Connect

    Connor, J.W.; Hastie, R.J.; Wilson, H.R.; Miller, R.L.

    1998-07-01

    A new formalism for analyzing the magnetohydrodynamic stability of a limiter tokamak edge plasma is developed. Two radially localized, high toroidal mode number n instabilities are studied in detail: a peeling mode and an edge ballooning mode. The peeling mode, driven by edge current density and stabilized by edge pressure gradient, has features which are consistent with several properties of tokamak behavior in the high confinement {open_quotes}H{close_quotes}-mode of operation, and edge localized modes (or ELMs) in particular. The edge ballooning mode, driven by the pressure gradient, is identified; this penetrates {approximately}n{sup 1/3} rational surfaces into the plasma (rather than {approximately}n{sup 1/2}, expected from conventional ballooning mode theory). Furthermore, there exists a coupling between these two modes and this coupling provides a picture of the ELM cycle.

  20. X-ray spectroscopy on tokamaks

    SciTech Connect

    von Goeler, S.; Bitter, M.; Cohen, S.

    1982-01-01

    During the last decade, the x-ray spectroscopy of high temperature plasmas has witnessed a rapid development. Most of the impulses have come from astrophysics, in particular, from the research on solar flares. On the other hand, the attainment of well-diagnosed, high-temperature laboratory plasmas in laser-pellet implosions and in tokamaks, has precipitated a fertile exchange between theory and experiment. Agreement and very detailed understanding has been reached for a great number of spectra with the result, that x-ray spectroscopy represents today a powerful and reliable new plasma diagnostic with important applications for fusion plasmas as well as solar flares. This paper is a short review of the experimental results from tokamaks.

  1. Self-Organized Stationary States of Tokamaks

    SciTech Connect

    Jardin, S. C.; Ferraro, N.; Krebs, I.

    2015-11-01

    We demonstrate that in a 3D resistive magnetohydrodynamic simulation, for some parameters it is possible to form a stationary state in a tokamak where a saturated interchange mode in the center of the discharge drives a near helical flow pattern that acts to nonlinearly sustain the configuration by adjusting the central loop voltage through a dynamo action. This could explain the physical mechanism for maintaining stationary nonsawtoothing "hybrid" discharges, often referred to as "flux pumping."

  2. Heating the Compact Ignition Tokamak (CIT)

    SciTech Connect

    Ignat, D.W.

    1989-11-01

    The proposed CIT starts operation in the late 1990's with 20 MW of rf heating power. The tokamak and facility are to be designed to accommodate 50 MW auxiliary heating. The heating methods new being considered are ion cyclotron heating (ICH) and electron cyclotron heating (ECH). Aspects of these systems are described, and the choice of power level and type is discussed. 18 refs.

  3. Self-Organized Stationary States of Tokamaks.

    PubMed

    Jardin, S C; Ferraro, N; Krebs, I

    2015-11-20

    We demonstrate that in a 3D resistive magnetohydrodynamic simulation, for some parameters it is possible to form a stationary state in a tokamak where a saturated interchange mode in the center of the discharge drives a near helical flow pattern that acts to nonlinearly sustain the configuration by adjusting the central loop voltage through a dynamo action. This could explain the physical mechanism for maintaining stationary nonsawtoothing "hybrid" discharges, often referred to as "flux pumping."

  4. High beta plasmas in the PBX tokamak

    SciTech Connect

    Bol, K.; Buchenauer, D.; Chance, M.; Couture, P.; Fishman, H.; Fonck, R.; Gammel, G.; Grek, B.; Ida, K.; Itami, K.

    1986-04-01

    Bean-shaped configurations favorable for high ..beta.. discharges have been investigated in the Princeton Beta Experiment (PBX) tokamak. Strongly indented bean-shaped plasmas have been successfully formed, and beta values of over 5% have been obtained with 5 MW of injected neutral beam power. These high beta discharges still lie in the first stability regime for ballooning modes, and MHD stability analysis implicates the external kink as responsible for the present ..beta.. limit.

  5. Instrumentation and controls of an ignited Tokamak

    NASA Astrophysics Data System (ADS)

    Becraft, W. R.; Golzy, J.; Houlberg, W. A.; Kukielka, C. A.; Onega, R. J.; Raju, G. V. S.; Stone, R. S.

    1980-10-01

    The instrumentation and controls of an ignited plasma magnetically confined in a Tokamak configuration needs increased emphasis in the following areas: (1) physics implications for control; (2) plasma shaping/position control; and (3) control to prevent disruptive instabilities. Effort in these and other areas are reported. The appendices focus attention on some preliminary ideas about the measurement of the deuteron-triton ratio in the plasma, synchrotron radiation, and divertor control.

  6. Tokamak with liquid metal toroidal field coil

    DOEpatents

    Ohkawa, Tihiro; Schaffer, Michael J.

    1981-01-01

    Tokamak apparatus includes a pressure vessel for defining a reservoir and confining liquid therein. A toroidal liner disposed within the pressure vessel defines a toroidal space within the liner. Liquid metal fills the reservoir outside said liner. Electric current is passed through the liquid metal over a conductive path linking the toroidal space to produce a toroidal magnetic field within the toroidal space about the major axis thereof. Toroidal plasma is developed within the toroidal space about the major axis thereof.

  7. Mathematical modeling plasma transport in tokamaks

    NASA Astrophysics Data System (ADS)

    Qiang, Ji

    1998-11-01

    In this work, we have applied a systematic calibration, validation and application procedure based on the methodology of mathematical modeling to international thermonuclear experimental reactor (ITER) ignition studies. The multi-mode plasma transport model used here includes a linear combination of drift wave branch and ballooning branch instabilities with two a priori uncertain constants to account for anomalous plasma transport in tokamaks. A Bayesian parameter estimation method is used including experimental calibration error/model offsets and error bar rescaling factors to determine the two uncertain constants in the transport model with quantitative confidence level estimates for the calibrated parameters, which gives two saturation levels of instabilities. This method is first tested using a gyroBohm multi-mode transport model with a pair of DIII-D discharge experimental data, and then applied to calibrating a nominal multi-mode transport model against a broad database using twelve discharges from seven different tokamaks. The calibrated transport model is then validated on five discharges from JT-60 with no adjustable constants. The results are in a good agreement with experimental data. Finally, the resulting class of multi-mode tokamak plasma transport models is applied to the transport analysis of the ignition probability in the next generation machine, ITER. The ignition probability of ITER for engineering design activity (EDA) parameters can be formally as high as 99.9% in the present context. The same probability for conceptual design activity (CDA) parameters of ITER, which has smaller size and lower current, is only 62.6%. This suggests that EDA parameters for ITER tokamak are very likely to achieve the self- sustained thermonuclear reaction, but CDA parameters are risky for the realization of ignition.

  8. Neutral-beam current drive in tokamaks

    SciTech Connect

    Devoto, R.S.

    1986-01-01

    The theory of neutral-beam current drive in tokamaks is reviewed. Experiments are discussed where neutral beams have been used to drive current directly and also indirectly through neoclassical effects. Application of the theory to an experimental test reactor is described. It is shown that neutral beams formed from negative ions accelerated to 500 to 700 keV are needed for this device.

  9. Confinement scaling and ignition in tokamaks

    SciTech Connect

    Perkins, F.W.; Sun, Y.C.

    1985-10-01

    A drift wave turbulence model is used to compute the scaling and magnitude of central electron temperature and confinement time of tokamak plasmas. The results are in accord with experiment. Application to ignition experiments shows that high density (1 to 2) . 10/sup 15/ cm/sup -3/, high field, B/sub T/ > 10 T, but low temperature T approx. 6 keV constitute the optimum path to ignition.

  10. Plasma filamentation in the Rijnhuizen tokamak RTP

    SciTech Connect

    Lopes Cardozo, N.J.; Schueller, F.C.; Barth, C.J.; Chu, C.C.; Pijper, F.J.; Lok, J.; Oomens, A.A.M. )

    1994-07-11

    Evidence for small scale magnetic structures in the Rijnhuizen tokamak RTP is presented. These are manifest through steps and peaks in the electron temperature and pressure, measured with multiposition Thomson scattering. During central electron cyclotron heating, several filaments of high pressure are found in the power deposition region. They live hundreds of microseconds. Near the sawtooth inversion radius a step'' in the temperature profile occurs. Further out, quasiperiodic structures are observed, in both Ohmic and heated discharges.

  11. Tokamaks: from A D Sakharov to the present (the 60-year history of tokamaks)

    NASA Astrophysics Data System (ADS)

    Azizov, E. A.

    2012-02-01

    The paper is prepared on the basis of the report presented at the session of the Physical Sciences Division of the Russian Academy of Sciences (RAS) at the Lebedev Physical Institute, RAS on 25 May 2011, devoted to the 90-year jubilee of Academician Andrei D Sakharov - the initiator of controlled nuclear fusion research in the USSR. The 60-year history of plasma research work in toroidal devices with a longitudinal magnetic field suggested by Andrei D Sakharov and Igor E Tamm in 1950 for the confinement of fusion plasma and known at present as tokamaks is described in brief. The recent (2006) agreement among Russia, the EU, the USA, Japan, China, the Republic of Korea, and India on the joint construction of the international thermonuclear experimental reactor (ITER) in France based on the tokamak concept is discussed. Prospects for using the tokamak as a thermonuclear (14 MeV) neutron source are examined.

  12. Development of a free-boundary tokamak equilibrium solver for advanced study of tokamak equilibria

    NASA Astrophysics Data System (ADS)

    Jeon, Young Mu

    2015-09-01

    A free-boundary Tokamak equilibrium solver (TES), developed for advanced study of tokamak equilibra, is described with two distinctive features. One is a generalized method to resolve the intrinsic axisymmetric instability, which is encountered in all equilibrium calculations with a freeboundary condition. The other is an extension to deal with a new divertor geometry such as snowflake or X divertors. For validations, the uniqueness of a solution is confirmed by the independence of variations in the computational domain, the mathematical correctness and accuracy of equilibrium profiles are checked by using a direct comparison with an analytic equilibrium known as a generalized Solov'ev equilibrium, and the governing force balance relation is tested by examining the intrinsic axisymmetric instabilities. As an application of an advanced equilibrium study, a snow-flake divertor configuration that requires a second-order zero of the poloidal magnetic flux is discussed in the circumstance of the Korea superconducting tokamak advanced research (KSTAR) coil system.

  13. Nondiffusive plasma transport at tokamak edge

    NASA Astrophysics Data System (ADS)

    Krasheninnikov, S. I.

    2000-10-01

    Recent findings show that cross field edge plasma transport at tokamak edge does not necessarily obey a simple diffusive law [1], the only type of a transport model applied so far in the macroscopic modeling of edge plasma transport. Cross field edge transport is more likely due to plasma filamentation with a ballistic motion of the filaments towards the first wall. Moreover, it so fast that plasma recycles on the main chamber first wall rather than to flow into divertor as conventional picture of edge plasma fluxes suggests. Crudely speaking particle recycling wise diverted tokamak operates in a limiter regime due to fast anomalous non-diffusive cross field plasma transport. Obviously that this newly found feature of edge plasma anomalous transport can significantly alter a design of any future reactor relevant tokamaks. Here we present a simple model describing the motion of the filaments in the scrape off layer and discuss it implications for experimental observations. [1] M. Umansky, S. I. Krasheninnikov, B. LaBombard, B. Lipschultz, and J. L. Terry, Phys. Plasmas 6 (1999) 2791; M. Umansky, S. I. Krasheninnikov, B. LaBombard and J. L. Terry, Phys. Plasmas 5 (1998) 3373.

  14. ADX - Advanced Divertor and RF Tokamak Experiment

    NASA Astrophysics Data System (ADS)

    Greenwald, Martin; Labombard, Brian; Bonoli, Paul; Irby, Jim; Terry, Jim; Wallace, Greg; Vieira, Rui; Whyte, Dennis; Wolfe, Steve; Wukitch, Steve; Marmar, Earl

    2015-11-01

    The Advanced Divertor and RF Tokamak Experiment (ADX) is a design concept for a compact high-field tokamak that would address boundary plasma and plasma-material interaction physics challenges whose solution is critical for the viability of magnetic fusion energy. This device would have two crucial missions. First, it would serve as a Divertor Test Tokamak, developing divertor geometries, materials and operational scenarios that could meet the stringent requirements imposed in a fusion power plant. By operating at high field, ADX would address this problem at a level of power loading and other plasma conditions that are essentially identical to those expected in a future reactor. Secondly, ADX would investigate the physics and engineering of high-field-side launch of RF waves for current drive and heating. Efficient current drive is an essential element for achieving steady-state in a practical, power producing fusion device and high-field launch offers the prospect of higher efficiency, better control of the current profile and survivability of the launching structures. ADX would carry out this research in integrated scenarios that simultaneously demonstrate the required boundary regimes consistent with efficient current drive and core performance.

  15. ECH on the MTX (Microwave Tokamak Experiment)

    SciTech Connect

    Stallard, B.W.; Byers, J.A.; Hooper, E.B.; Makowski, M.A.; Meassick, S.; Rice, B.W.; Rognlien, T.D.; Verboncoeur, J.

    1989-04-01

    The Microwave Tokamak Experiment (MTX) at LLNL is investigating the heating of high density Tokamak plasmas using an intense pulse FEL. Our first experiments, now beginning, will study the absorption and plasma heating of single FEL pulses (20 ns pulse length and peak power up to 2 GW) at a frequency of 140 GHz. A later phase of experiments also at 140 GHz will study FEL heating at 5 kHz rate for a pulse train up to 50 pulses (35 ns pulse length and peak power up to 4 GW). Future operations are planned at 250 GHz with an average power of 2 MW for a pulse train of 0.5 s. The microwave output of the FEL is transported quasi-optically to the tokamak through a window-less, evacuated pipe of 20 in. diameter, using a six mirror system. Computational modelling of the non-linear absorption for the MTX geometry predicts single-pass absorption of 40% at a density and temperature of 1.8 /times/ 10/sup 20/m/sup /minus/3/ and 1 keV, respectively. To measure plasma microwave absorption and backscatter, diagnostics are available to measure forward and reflected power (parallel wire grid beam-splitter and mirror directional couplers) and power transmitted through the plasma (segmented calorimeter and waveguide detector). Other fast diagnostics include ECE, Thompson scattering, soft x-rays, and fast magnetic probes. 8 refs., 2 figs.

  16. Remote feedback stabilization of tokamak instabilities

    SciTech Connect

    Sen, A.K. )

    1994-05-01

    A novel remote suppressor consisting of an injected ion beam has been used for the stabilization of plasma instabilities. A collisionless curvature-driven trapped-particle instability, an [bold E][times][bold B] flute mode and an ion temperature gradient (ITG) instability have been successfully suppressed down to noise levels using this scheme. Furthermore, the first experimental demonstration of a multimode feedback stabilization with a single sensor--suppressor pair has been achieved. Two modes (an [bold E][times][bold B] flute and an ITG mode) were simultaneously stabilized with a simple state-feedback-type method where more state'' information was generated from a single-sensor Langmuir probe by appropriate signal processing. The above experiments may be considered as paradigms for controlling several important tokamak instabilities. First, feedback suppression of edge fluctuations in a tokamak with a suitable form of insulated segmented poloidal limiter sections used as Langmuir-probe-like suppressors is proposed. Other feedback control schemes are proposed for the suppression of electrostatic core fluctuations via appropriately phased ion density input from a modulated neutral beam. Most importantly, a scheme to control major disruptions in tokamaks via feedback suppression of kink (and possibly) tearing modes is discussed. This may be accomplished by using a modulated neutral beam suppressor in a feedback loop, which will supply a momentum input of appropriate phase and amplitude. Simple theoretical models predict modest levels of beam energy, current, and power.

  17. Forced Magnetic Reconnection In A Tokamak Plasma

    NASA Astrophysics Data System (ADS)

    Callen, J. D.; Hegna, C. C.

    2015-11-01

    The theory of forced magnetic field reconnection induced by an externally imposed resonant magnetic perturbation usually uses a sheared slab or cylindrical magnetic field model and often focuses on the potential time-asymptotic induced magnetic island state. However, tokamak plasmas have significant magnetic geometry and dynamical plasma toroidal rotation screening effects. Also, finite ion Larmor radius (FLR) and banana width (FBW) effects can damp and thus limit the width of a nascent magnetic island. A theory that is more applicable for tokamak plasmas is being developed. This new model of the dynamics of forced magnetic reconnection considers a single helicity magnetic perturbation in the tokamak magnetic field geometry, uses a kinetically-derived collisional parallel electron flow response, and employs a comprehensive dynamical equation for the plasma toroidal rotation frequency. It is being used to explore the dynamics of bifurcation into a magnetically reconnected state in the thin singular layer around the rational surface, evolution into a generalized Rutherford regime where the island width exceeds the singular layer width, and assess the island width limiting effects of FLR and FBW polarization currents. Support by DoE grants DE-FG02-86ER53218, DE-FG02-92ER54139.

  18. Edge-localized-modes in tokamaks

    SciTech Connect

    Leonard, A. W.

    2014-09-15

    Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM instability grows explosively, rapidly transporting energy and particles onto open field lines and material surfaces. Though ELMs provide additional particle and impurity transport through the H-mode transport barrier, enabling steady operation, the resulting heat flux transients to plasma facing surfaces project to large amplitude in future low collisionality burning plasma tokamaks. Measurements of the ELM heat flux deposition onto material surfaces in the divertor and main chamber indicate significant broadening compared to inter-ELM heat flux, with a timescale for energy deposition that is consistent with sonic ion flow and numerical simulation. Comprehensive ELM simulation is highlighting the important physics processes of ELM transport including parallel transport due to magnetic reconnection and turbulence resulting from collapse of the H-mode transport barrier. Encouraging prospects for ELM control and/or suppression in future tokamaks include intrinsic modes of ELM free operation, ELM triggering with frequent small pellet injection and the application of 3D magnetic fields.

  19. Edge-localized-modes in tokamaks

    DOE PAGES

    Leonard, Anthony W.

    2014-09-11

    Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM instability grows explosively rapidly transporting energy and particles onto open field lines and material surfaces. Though ELMs provide additional particle and impurity transport through the H-mode transport barrier, enabling steady operation, the resulting heat flux transients to plasma facing surfaces project to large amplitude in future low collisionality burning plasma tokamaks. Measurements of the ELM heat flux deposition onto material surfaces in the divertor and main chamber indicate significant broadening compared to inter-ELM heatmore » flux, with a timescale for energy deposition that is consistent with sonic ion flow and numerical simulation. Comprehensive ELM simulation is highlighting the important physics processes of ELM transport including parallel transport due to magnetic reconnection and turbulence resulting from collapse of the H-mode transport barrier. As a result, encouraging prospects for ELM control and/or suppression in future tokamaks include intrinsic modes of ELM free operation, ELM triggering with frequent small pellet injection and the application of 3D magnetic fields.« less

  20. Edge-localized-modes in tokamaks

    SciTech Connect

    Leonard, Anthony W.

    2014-09-11

    Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM instability grows explosively rapidly transporting energy and particles onto open field lines and material surfaces. Though ELMs provide additional particle and impurity transport through the H-mode transport barrier, enabling steady operation, the resulting heat flux transients to plasma facing surfaces project to large amplitude in future low collisionality burning plasma tokamaks. Measurements of the ELM heat flux deposition onto material surfaces in the divertor and main chamber indicate significant broadening compared to inter-ELM heat flux, with a timescale for energy deposition that is consistent with sonic ion flow and numerical simulation. Comprehensive ELM simulation is highlighting the important physics processes of ELM transport including parallel transport due to magnetic reconnection and turbulence resulting from collapse of the H-mode transport barrier. As a result, encouraging prospects for ELM control and/or suppression in future tokamaks include intrinsic modes of ELM free operation, ELM triggering with frequent small pellet injection and the application of 3D magnetic fields.

  1. The Spherical Tokamak MEDUSA for Mexico

    NASA Astrophysics Data System (ADS)

    Ribeiro, C.; Salvador, M.; Gonzalez, J.; Munoz, O.; Tapia, A.; Arredondo, V.; Chavez, R.; Nieto, A.; Gonzalez, J.; Garza, A.; Estrada, I.; Jasso, E.; Acosta, C.; Briones, C.; Cavazos, G.; Martinez, J.; Morones, J.; Almaguer, J.; Fonck, R.

    2011-10-01

    The former spherical tokamak MEDUSA (Madison EDUcation Small Aspect.ratio tokamak, R < 0.14m, a < 0.10m, BT < 0.5T, Ip < 40kA, 3ms pulse) is currently being recomissioned at the Universidad Autónoma de Nuevo León, Mexico, as part of an agreement between the Faculties of Mech.-Elect. Eng. and Phy. Sci.-Maths. The main objective for having MEDUSA is to train students in plasma physics & technical related issues, aiming a full design of a medium size device (e.g. Tokamak-T). Details of technical modifications and a preliminary scientific programme will be presented. MEDUSA-MX will also benefit any developments in the existing Mexican Fusion Network. Strong liaison within national and international plasma physics communities is expected. New activities on plasma & engineering modeling are expected to be developed in parallel by using the existing facilities such as a multi-platform computer (Silicon Graphics Altix XE250, 128G RAM, 3.7TB HD, 2.7GHz, quad-core processor), ancillary graph system (NVIDIA Quadro FE 2000/1GB GDDR-5 PCI X16 128, 3.2GHz), and COMSOL Multiphysics-Solid Works programs.

  2. Interactive, multiobjective Bayesian optimization of tokamak scenarios

    NASA Astrophysics Data System (ADS)

    Urban, Jakub; Artaud, Jean-François

    2016-10-01

    Bayesian optimization is applied to tokamak scenario optimizations. The key advantages are 1) a reduced number of objective function evaluations, 2) no need for derivatives, and 3) the possibility to include a prior knowledge. This is of a great value for optimizing tokamak scenarios, where several (competing) objectives with often unknown magnitudes exist and the number of parameters is large (>10). The first two properties imply that Bayesian optimization is well suited for heavy, complex objective functions. Reusing previous iterations as priors for next optimization steps effectively enables interactive, multiobjective optimizations, regardless of whether a human decision maker is included or not. We show that these features make Bayesian optimization an outstanding tool for optimizing tokamak scenarios. Objective functions and constraints, targeting, e.g., fusion gain, flux consumption, coils currents limits or q-profile, can be assembled interactively. The optimized parameter vector may include actuators like plasma current or heating waveforms. We demonstrate the capabilities on optimizing ITER and DEMO-like scenarios, simulated by the METIS code.

  3. Tokamak Physics Experiment diagnostic plans (invited)

    NASA Astrophysics Data System (ADS)

    Medley, S. S.

    1995-01-01

    A superconducting Tokamak Physics Experiment (TPX) whose mission is to develop the scientific basis for a compact and continuously operating tokamak fusion reactor is being designed by an integrated U.S. national team. Key physics features such as strong shaping, a double-null poloidal divertor, full noninductive current drive, and current profile control capability will be used to explore improvements in energy confinement and beta limit scaling in high-aspect-ratio plasmas with a high bootstrap current fraction. Steady-state operation of TPX permits these studies to be extended to time scales significantly exceeding the global current-relaxation time and the plasma-wall equilibrium time. The diagnostic requirements are determined by the TPX mission and supporting objectives, such as optimization of plasma performance through active control of the current profile and of the plasma-wall interactions. Diagnostic measurements are needed to characterize the plasma behavior over the full range of conventional tokamak plasma parameters with appropriate spatial and temporal resolution as well as for control and monitoring of aspects of the machine operation such as the plasma position and shape, plasma current, vacuum vessel currents, electron density and temperature, and the divertor and limiter temperatures. In addition, several diagnostic capabilities that are especially critical for the TPX project will be discussed.

  4. LHCD Scenarios for Spherical Tokamak Plasmas

    SciTech Connect

    Takase, Y.; Ejiri, A.; Oosako, T.; Bonoli, P. T.; Wright, J. C.

    2007-09-28

    Noninductive plasma current start-up and sustainment are crucial issues for spherical tokamak reactors and other applications such as component test facility. It is widely recognized that the lower hybrid wave (the slow wave), which is most efficient in driving current, is not accessible to the core of a fully developed spherical tokamak plasma with very high dielectric constant. However, it may be useful in the initial plasma current ramp-up phase while the density is still low, where it is not practical to use other methods of noninductive current drive. Such a possibility is investigated theoretically for planned experiments on the TST-2 spherical tokamak at the University of Tokyo. The transmitters previously used for FWCD experiments on JFT-2M (200 MHz) are being prepared for this experiment. The combline antenna used for JFT-2M has been modified for use in TST-2. This antenna will be used to excite a unidirectional fast wave traveling in the toroidal direction with a toroidal mode number of 12 (corresponding to an initial parallel index of refraction of about 5). The fast wave can mode convert to the lower hybrid wave and drive current under some conditions. Examination of the dispersion relation indicates that there may be a suitable regime at relatively high field (0.3 T) and low density (<1x10{sup 19} m{sup -3})

  5. Spherical tokamaks with plasma centre-post

    NASA Astrophysics Data System (ADS)

    Ribeiro, Celso

    2013-10-01

    The metal centre-post (MCP) in tokamaks is a structure which carries the total toroidal field current and also houses the Ohmic heating solenoid in conventional or low aspect ratio (Spherical)(ST) tokamaks. The MCP and solenoid are critical components for producing the toroidal field and for the limited Ohmic flux in STs. Constraints for a ST reactor related to these limitations lead to a minimum plasma aspect ratio of 1.4 which reduces the benefit of operation at higher betas in a more compact ST reactor. Replacing the MCP is of great interest for reactor-based ST studies since the device is simplified, compactness increased, and maintenance reduced. An experiment to show the feasibility of using a plasma centre-post (PCP) is being currently under construction and involves a high level of complexity. A preliminary study of a very simple PCP, which is ECR(Electron Cyclotron Resonance)-assisted and which includes an innovative fuelling system based on pellet injection, has recently been reported. This is highly suitable for an ultra-low aspect ratio tokamak (ULART) device. Advances on this PCP ECR-assisted concept within a ULART and the associated fuelling system are presented here, and will include the field topology for the PCP ECR-assisted scheme, pellet ablation modeling, and a possible global equilibrium simulation. VIE-ITCR, IAEA-CRP contr.17592, National Instruments-Costa Rica.

  6. A simulation study of a controlled tokamak plasma

    NASA Astrophysics Data System (ADS)

    Fujii, N.; Niwa, Y.

    1980-03-01

    A tokamak circuit theory, including results of numerical simulation studies, is applied to a control system synthesized for a Joule heated tokamak plasma. The treatment is similar to that of Ogata and Ninomiya (1979) except that in this case a quadrupole field coil current is considered coexisting with image induced on a vacuum chamber.

  7. Advanced tokamak operating modes in TPX and ITER

    SciTech Connect

    Nevins, W.M.

    1994-12-31

    A program is described to develop the advanced tokamak physics required for an economic steady-state fusion reactor on existing (short-pulse) tokamak experiments; to extend these operating modes to long-pulse on TPX; and finally to demonstrate them in a long-pulse D-T plasma on ITER.

  8. Numerical investigations of plasma parameters in the COMPASS tokamak

    SciTech Connect

    Havlickova, E.; Zagorski, R.; Panek, R.

    2008-09-15

    A numerical investigation of plasma parameters in a diverter configuration of COMPASS tokamak is presented. The plasma parameters in the device are analyzed in the frame of the self-consistent description of the central plasma and edge region. The possibility of achieving high recycling and detached regimes in the boundary layer of the COMPASS tokamak is discussed.

  9. Fokker-Planck/Transport model for neutral beam driven tokamaks

    SciTech Connect

    Killeen, J.; Mirin, A.A.; McCoy, M.G.

    1980-01-01

    The application of nonlinear Fokker-Planck models to the study of beam-driven plasmas is briefly reviewed. This evolution of models has led to a Fokker-Planck/Transport (FPT) model for neutral-beam-driven Tokamaks, which is described in detail. The FPT code has been applied to the PLT, PDX, and TFTR Tokamaks, and some representative results are presented.

  10. Physics design requirements for the Tokamak Physics Experiment (TPX)

    SciTech Connect

    Neilson, G.H.; Goldston, R.J.; Jardin, S.C.; Reiersen, W.T.; Nevins, W.M.; Porkolab, M.; Ulrickson, M.

    1993-11-01

    The design of TPX is driven by physics requirements that follow from its mission. The tokamak and heating systems provide the performance and profile controls needed to study advanced steady state tokamak operating modes. The magnetic control systems provide substantial flexibility for the study of regimes with high beta and bootstrap current. The divertor is designed for high steady state power and particle exhaust.

  11. Advanced tokamak operating modes in TPX and ITER

    NASA Astrophysics Data System (ADS)

    Nevins, W. M.

    1994-09-01

    A program is described to develop the advanced tokamak physics required for an economic steady-state fusion reactor on existing (short-pulse) tokamak experiments; to extend these operating modes to long-pulse on TPX; and finally to demonstrate them in a long-pulse D-T plasma on ITER.

  12. Progress and prospects in understanding the physics of tokamak experiments

    SciTech Connect

    Hutchinson, I.

    1992-12-01

    A whistle-stop tour of the diverse physics of tokamak plasma confinement. This talk will illustrate the way in which fusion research on tokamaks has led to important and interesting physics results, and discuss some of the scientific challenges still ahead before fusion`s potential can be established.

  13. Recent progress on the Compact Ignition Tokamak (CIT)

    SciTech Connect

    Ignat, D.W.

    1987-01-01

    This report describes work done on the Compact Ignition Tokamak (CIT), both at the Princeton Plasma Physics Laboratory (PPPL) and at other fusion laboratories in the United States. The goal of CIT is to reach ignition in a tokamak fusion device in the mid-1990's. Scientific and engineering features of the design are described, as well as projected cost and schedule.

  14. Tokamak Physics Experiment (TPX) power supply design and development

    SciTech Connect

    Neumeyer, C.; Bronner, G.; Lu, E.; Ramakrishnan, S.

    1995-04-01

    The Tokamak Physics Experiment (TPX) is an advanced tokamak project aimed at the production of quasi-steady state plasmas with advanced shape, heating, and particle control. TPX is to be built at the Princeton Plasma Physics Laboratory (PPPL) using many of the facilities from the Tokamak Fusion Test Reactor (TFTR). TPX will be the first tokamak to utilize superconducting (SC) magnets in both the toroidal field (TF) and poloidal field (PF) systems. This new feature requires a departure from the traditional tokamak power supply schemes. This paper describes the plan for the adaptation of the PPPL/FTR power system facilities to supply TPX. Five major areas are addressed, namely the AC power system, the TF, PF and Fast Plasma Position Control (FPPC) power supplies, and quench protection for the TF and PF systems. Special emphasis is placed on the development of new power supply and protection schemes.

  15. Hybrid Fusion: The Only Viable Development Path for Tokamaks?

    NASA Astrophysics Data System (ADS)

    Manheimer, Wallace

    2009-03-01

    The world needs a great deal of carbon free energy, and soon, for civilization to continue. Fusion's goal is to develop such a carbon free energy source. For the last 4 decades, tokamaks have been the best magnetic fusion has to offer. But what if its development stops short of commercial fusion? This paper introduces `conservative design principles' for tokamaks. These are very simple, are reasonably based in theory, and have always constrained tokamak operation. Assuming they continue to do so, it is unlikely that tokamaks will ever make it as commercial reactors. This is independent of their confinement properties. However because of the large additional gain in hybrid fusion, tokamaks reactors look like they can make it as hybrid fuel producers, and provide large scale power by mid century or shortly thereafter.

  16. Mathematical modeling plasma transport in tokamaks

    SciTech Connect

    Quiang, Ji

    1997-01-01

    In this work, the author applied a systematic calibration, validation and application procedure based on the methodology of mathematical modeling to international thermonuclear experimental reactor (ITER) ignition studies. The multi-mode plasma transport model used here includes a linear combination of drift wave branch and ballooning branch instabilities with two a priori uncertain constants to account for anomalous plasma transport in tokamaks. A Bayesian parameter estimation method is used including experimental calibration error/model offsets and error bar rescaling factors to determine the two uncertain constants in the transport model with quantitative confidence level estimates for the calibrated parameters, which gives two saturation levels of instabilities. This method is first tested using a gyroBohm multi-mode transport model with a pair of DIII-D discharge experimental data, and then applied to calibrating a nominal multi-mode transport model against a broad database using twelve discharges from seven different tokamaks. The calibrated transport model is then validated on five discharges from JT-60 with no adjustable constants. The results are in a good agreement with experimental data. Finally, the resulting class of multi-mode tokamak plasma transport models is applied to the transport analysis of the ignition probability in a next generation machine, ITER. A reference simulation of basic ITER engineering design activity (EDA) parameters shows that a self-sustained thermonuclear burn with 1.5 GW output power can be achieved provided that impurity control makes radiative losses sufficiently small at an average plasma density of 1.2 X 1020/m3 with 50 MW auxiliary heating. The ignition probability of ITER for the EDA parameters, can be formally as high as 99.9% in the present context. The same probability for concept design activity (CDA) parameters of ITER, which has smaller size and lower current, is only 62.6%.

  17. Halo Current Simulations for Tokamak Plasmas

    NASA Astrophysics Data System (ADS)

    Paccagnella, R.; Strauss, H. R.; Torasso, R.; Park, W.; Jardin, S.; Breslau, J.; Pletzer, A.; Fu, G. Y.; Sugiyama, L.

    2003-10-01

    A 3D MHD multi-level code, M3D [1], has been used in this work to simulate a tokamak Vertical Displacement Event (VDE) scenario. These simulations are interesting both from the point of view of gaining physical insight on the plasma dynamics during a VDE or a disruption event and are also relevant in order to estimate the amount of non-axisymmetric torques on the vacuum chamber -- a particular important issue for next generation tokamak (like ITER) design. In this work we numerically simulate a single-null ITER-like plasma evolution using a nonlinear single-fluid model interfaced through thin shell resistive wall boundary conditions to the external vacuum solution. A complete reconstruction of the magnetic field time evolution is therefore possible in the plasma and vacuum regions. Work is in progress to benchmark the code with 2D simulations done with the TSC [2] code. We have previously verified the expected linear scaling of the vertical instability growth rate with the wall resistivity. We are studying the effect of different initial tokamak equilibria (i.e. with different q profiles) on the instability growth rate. We are also studying the nonlinear evolution of the VDE for different fault-scenarios involving the relative timing of the disruptive thermal quench and the loss of vertical control, and for different assumptions regarding the conductivity and width of the plasma halo region. An output of this work is a prediction of the Toroidal Peaking Factor (TPF) [3] of the halo currents and associated vessel forces characterizing the non-axisymmetric events. This work was supported in part by the USDOE. [1] PARK, W., et al., Phys.Plasmas 6, 1796 (1999). [2] Sayer, R.O., Peng, Y-K. M., Jardin, S. C., Kellman, A. G., Wesley, J. C., Nuclear Fusion 33, 969 (1993). [3] Pomphrey, N., Bialek, J., Park, W., Nuclear Fusion 38, 449 (1998).

  18. Industry roles in the Tokamak Physics Experiment

    SciTech Connect

    Thomassen, K.; Lang, D.; Schmidt, J.; Burger, A.

    1995-06-01

    There are several distinguishing features of the Tokamak Physics Experiment (TPX) to be found in the TPX program and in the organizations for constructing and operating the machine. Programmatically, TPX addresses several issues critical to the viability of magnetic fusion power plants. Organizationally, it is a multi-institutional partnership to construct and operate the machine and carry out its program mission. An important part of the construction partnership is the integrated industrial responsibility for design, R&D, and construction. The TPX physics design takes advantage of recent research on advanced tokamak operating modes achieved for time scales of the order of seconds that are consistent with continuous operation. This synergism of high performance (higher power density) modes with plasma current driven mostly by internal pressure (boot-strap effect) points toward tokamak power plants that will be cost-competitive and operate continuously. A large fraction of the project is subcontracted to industry. By policy, these contracts are at a high level in the project breakdown of work, giving contractors much of the overall responsibility for a given major system. That responsibility often includes design and R&D in addition to the fabrication of the system in question. Each contract is managed through one of three national laboratories: PPPL, LLNL, and ORNL. Separate contracts for system integration and construction management round out the industry involvement in the project. This integrated, major responsibility attracts high-level corporate attention within each company, which are major corporations with long-standing interest in fusion. Through the contracts already established on the TPX project, a new standard for industry involvement in fusion has been set, and these industries will be well prepared for future fusion projects.

  19. Electrostatic analysis of the tokamak edge plasma

    SciTech Connect

    Motley, R.W.

    1981-07-01

    The intrusion of an equipotential poloidal limiter into the edge plasma of a circular tokamak discharge distorts the axisymmetry in two ways: (1) it (partially) shorts out the top-to-bottom Pfirsch-Schlueter driving potentials, and (2) it creates zones of back current flow into the limiter. The resulting boundary mismatch between the outer layers and the inner axisymmetric Pfirsch-Schlueter layer provides free energy to drive the edge plasma unstable. Special limiters are proposed to symmetrize the edge plasma and thereby reduce the electrical and MHD activity in the boundary layer.

  20. Tokamak physics experiment: Diagnostic windows study

    SciTech Connect

    Merrigan, M.; Wurden, G.A.

    1995-11-01

    We detail the study of diagnostic windows and window thermal stress remediation in the long-pulse, high-power Tokamak Physics Experiment (TPX) operation. The operating environment of the TPX diagnostic windows is reviewed, thermal loads on the windows estimated, and cooling requirements for the windows considered. Applicable window-cooling technology from other fields is reviewed and its application to the TPX windows considered. Methods for TPX window thermal conditioning are recommended, with some discussion of potential implementation problems provided. Recommendations for further research and development work to ensure performance of windows in the TPX system are presented.

  1. Self-Organized Stationary States of Tokamaks

    DOE PAGES

    Jardin, S. C.; Ferraro, N.; Krebs, I.

    2015-11-17

    We demonstrate that in a 3D resistive magnetohydrodynamic (MHD) simulation, for some parameters it is possible to form a stationary state in a tokamak where a saturated interchange mode in the center of the discharge drives a near helical flow pattern that acts to non-linearly sustain the configuration by adjusting the central loop voltage through a dynamo action. This could explain the physical mechanism for maintaining stationary non-sawtoothing “hybrid” discharges, often referred to as “flux-pumping”.

  2. An efficient transport solver for tokamak plasmas

    DOE PAGES

    Park, Jin Myung; Murakami, Masanori; St. John, H. E.; ...

    2017-01-03

    A simple approach to efficiently solve a coupled set of 1-D diffusion-type transport equations with a stiff transport model for tokamak plasmas is presented based on the 4th order accurate Interpolated Differential Operator scheme along with a nonlinear iteration method derived from a root-finding algorithm. Here, numerical tests using the Trapped Gyro-Landau-Fluid model show that the presented high order method provides an accurate transport solution using a small number of grid points with robust nonlinear convergence.

  3. Overview of the Compact Ignition tokamak

    SciTech Connect

    Flanagan, C. A.; Peng, Yueng Kay Martin

    1986-01-01

    The Compact Ignition Tokamak (CIT) mission is to achieve ignition and provide the capability to experimentally study burning plasma behavior. A national team has developed a baseline concept including definition of the necessary research and development. The baseline concept satisfies the physics performance objectives established for the project and complies with defined design specifications. To ensure that the mission is achieved, the design requires large magnetic fields on axis (10 T) and use of large plasma currents (10 MA). The design is capable of accommodating significant auxiliary heating to enter the ignited regime. The CIT is designed to operate in plasma parameter regimes that a are directly relevant to future fusion power reactors.

  4. Energetic particles in spherical tokamak plasmas

    NASA Astrophysics Data System (ADS)

    McClements, K. G.; Fredrickson, E. D.

    2017-05-01

    Spherical tokamaks (STs) typically have lower magnetic fields than conventional tokamaks, but similar mass densities. Suprathermal ions with relatively modest energies, in particular beam-injected ions, consequently have speeds close to or exceeding the Alfvén velocity, and can therefore excite a range of Alfvénic instabilities which could be driven by (and affect the behaviour of) fusion α-particles in a burning plasma. STs heated with neutral beams, including the small tight aspect ratio tokamak (START), the mega amp spherical tokamak (MAST), the national spherical torus experiment (NSTX) and Globus-M, have thus provided an opportunity to study toroidal Alfvén eigenmodes (TAEs), together with higher frequency global Alfvén eigenmodes (GAEs) and compressional Alfvén eigenmodes (CAEs), which could affect beam current drive and channel fast ion energy into bulk ions in future devices. In NSTX GAEs were correlated with a degradation of core electron energy confinement. In MAST pulses with reduced magnetic field, CAEs were excited across a wide range of frequencies, extending to the ion cyclotron range, but were suppressed when hydrogen was introduced to the deuterium plasma, apparently due to mode conversion at ion-ion hybrid resonances. At lower frequencies fishbone instabilities caused fast particle redistribution in some MAST and NSTX pulses, but this could be avoided by moving the neutral beam line away from the magnetic axis or by operating the plasma at either high density or elevated safety factor. Fast ion redistribution has been observed during GAE avalanches on NSTX, while in both NSTX and MAST fast ions were transported by saturated kink modes, sawtooth crashes, resonant magnetic perturbations and TAEs. The energy dependence of fast ion redistribution due to both sawteeth and TAEs has been studied in Globus-M. High energy charged fusion products are unconfined in present-day STs, but have been shown in MAST to provide a useful diagnostic of beam ion

  5. Neoclassical Transport Properties of Tokamak Plasmas

    SciTech Connect

    Weyssow, B.

    2004-03-15

    The classical transport theory is strictly valid for a plasma in a homogeneous and stationary magnetic field. In the '60, experiments have shown that this theory does not apply as a local theory of transport in Tokamaks. It was shown that global geometric characteristics of the confining elements have a strong influence on the transport. Three regimes of collisionality are characteristic of the neoclassical transport theory: the banana regime (the electronic diffusion coefficient increases starting from zero), the plateau regime (the diffusion coefficient is almost independent of the collisionality) and the Pfirsch-Schlueter regime (the electronic diffusion coefficient again increases with the collisionality)

  6. 3D MHD Simulations of Tokamak Disruptions

    NASA Astrophysics Data System (ADS)

    Woodruff, Simon; Stuber, James

    2014-10-01

    Two disruption scenarios are modeled numerically by use of the CORSICA 2D equilibrium and NIMROD 3D MHD codes. The work follows the simulations of pressure-driven modes in DIII-D and VDEs in ITER. The aim of the work is to provide starting points for simulation of tokamak disruption mitigation techniques currently in the CDR phase for ITER. Pressure-driven instability growth rates previously observed in simulations of DIIID are verified; Halo and Hiro currents produced during vertical displacements are observed in simulations of ITER with implementation of resistive walls in NIMROD. We discuss plans to exercise new code capabilities and validation.

  7. Diamagnetic flux measurement in Aditya tokamak

    SciTech Connect

    Kumar, Sameer; Jha, Ratneshwar; Lal, Praveen; Hansaliya, Chandresh; Gopalkrishna, M. V.; Kulkarni, Sanjay; Mishra, Kishore

    2010-12-15

    Measurements of diamagnetic flux in Aditya tokamak for different discharge conditions are reported for the first time. The measured diamagnetic flux in a typical discharge is less than 0.6 mWb and therefore it has required careful compensation for various kinds of pick-ups. The hardware and software compensations employed in this measurement are described. We introduce compensation of a pick-up due to plasma current of less than 20 kA in short duration discharges, in which plasma pressure gradient is supposed to be negligible. The flux measurement during radio frequency heating is also presented in order to validate compensation.

  8. Diamagnetic flux measurement in Aditya tokamak.

    PubMed

    Kumar, Sameer; Jha, Ratneshwar; Lal, Praveen; Hansaliya, Chandresh; Gopalkrishna, M V; Kulkarni, Sanjay; Mishra, Kishore

    2010-12-01

    Measurements of diamagnetic flux in Aditya tokamak for different discharge conditions are reported for the first time. The measured diamagnetic flux in a typical discharge is less than 0.6 mWb and therefore it has required careful compensation for various kinds of pick-ups. The hardware and software compensations employed in this measurement are described. We introduce compensation of a pick-up due to plasma current of less than 20 kA in short duration discharges, in which plasma pressure gradient is supposed to be negligible. The flux measurement during radio frequency heating is also presented in order to validate compensation.

  9. Energetic particles in spherical tokamak plasmas

    DOE PAGES

    McClements, K. G.; Fredrickson, E. D.

    2017-03-21

    Spherical tokamaks (STs) typically have lower magnetic fields than conventional tokamaks, but similar mass densities. Suprathermal ions with relatively modest energies, in particular beam-injected ions, consequently have speeds close to or exceeding the Alfvén velocity, and can therefore excite a range of Alfvénic instabilities which could be driven by (and affect the behaviour of) fusion α-particles in a burning plasma. STs heated with neutral beams, including the small tight aspect ratio tokamak (START), the mega amp spherical tokamak (MAST), the national spherical torus experiment (NSTX) and Globus-M, have thus provided an opportunity to study toroidal Alfvén eigenmodes (TAEs), together withmore » higher frequency global Alfvén eigenmodes (GAEs) and compressional Alfvén eigenmodes (CAEs), which could affect beam current drive and channel fast ion energy into bulk ions in future devices. In NSTX GAEs were correlated with a degradation of core electron energy confinement. In MAST pulses with reduced magnetic field, CAEs were excited across a wide range of frequencies, extending to the ion cyclotron range, but were suppressed when hydrogen was introduced to the deuterium plasma, apparently due to mode conversion at ion–ion hybrid resonances. At lower frequencies fishbone instabilities caused fast particle redistribution in some MAST and NSTX pulses, but this could be avoided by moving the neutral beam line away from the magnetic axis or by operating the plasma at either high density or elevated safety factor. Fast ion redistribution has been observed during GAE avalanches on NSTX, while in both NSTX and MAST fast ions were transported by saturated kink modes, sawtooth crashes, resonant magnetic perturbations and TAEs. The energy dependence of fast ion redistribution due to both sawteeth and TAEs has been studied in Globus-M. High energy charged fusion products are unconfined in present-day STs, but have been shown in MAST to provide a useful diagnostic of

  10. Tokamak equilibria with reversed current density.

    PubMed

    Martynov, A A; Medvedev, S Yu; Villard, L

    2003-08-22

    Observations of nearly zero toroidal current in the central region of tokamaks (the "current hole") raises the question of the existence of toroidal equilibria with very low or reversed current in the core. The solutions of the Grad-Shafranov equilibrium equation with hollow toroidal current density profile including negative current density in the plasma center are investigated. Solutions of the corresponding eigenvalue problem provide simple examples of such equilibrium configurations. More realistic equilibria with toroidal current density reversal are computed using a new equilibrium problem formulation and computational algorithm which do not assume nested magnetic surfaces.

  11. Nonlinear gyrokinetic equations for tokamak microturbulence

    SciTech Connect

    Hahm, T.S.

    1988-05-01

    A nonlinear electrostatic gyrokinetic Vlasov equation, as well as Poisson equation, has been derived in a form suitable for particle simulation studies of tokamak microturbulence and associated anomalous transport. This work differs from the existing nonlinear gyrokinetic theories in toroidal geometry, since the present equations conserve energy while retaining the crucial linear and nonlinear polarization physics. In the derivation, the action-variational Lie perturbation method is utilized in order to preserve the Hamiltonian structure of the original Vlasov-Poisson system. Emphasis is placed on the dominant physics of the collective fluctuations in toroidal geometry, rather than on details of particle orbits. 13 refs.

  12. Viscosity in the edge of tokamak plasmas

    SciTech Connect

    Stacey, W.M.

    1993-05-01

    A fluid representation of viscosity has been incorporated into a set of fluid equations that are maximally ordered in the ``short-radial-gradient-scale-length`` (srgsl) ordering that is appropriate for the edge of tokamak plasmas. The srgsl ordering raises viscous drifts and other viscous terms to leading order and fundamentally alters the character of the fluid equations. A leasing order viscous drift is identified. Viscous-driven radial particle and energy fluxes in the scrape-off layer and divertor channel are estimated to have an order unity effect in reducing radial peaking of energy fluxes transported along the field lines to divertor collector plates.

  13. Viscosity in the edge of tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Stacey, W. M.

    1993-05-01

    A fluid representation of viscosity has been incorporated into a set of fluid equations that are maximally ordered in the 'short radial gradient scale length' (srgsl) ordering that is appropriate for the edge of tokamak plasmas. The srgsl ordering raises viscous drifts and other viscous terms to leading order and fundamentally alters the character of the fluid equations. A leasing order viscous drift is identified. Viscous-driven radial particle and energy fluxes in the scrape-off layer and divertor channel are estimated to have an order unity effect in reducing radial peaking of energy fluxes transported along the field lines to divertor collector plates.

  14. Self-Organized Stationary States of Tokamaks

    SciTech Connect

    Jardin, S. C.; Ferraro, N.; Krebs, I.

    2015-11-17

    We demonstrate that in a 3D resistive magnetohydrodynamic (MHD) simulation, for some parameters it is possible to form a stationary state in a tokamak where a saturated interchange mode in the center of the discharge drives a near helical flow pattern that acts to non-linearly sustain the configuration by adjusting the central loop voltage through a dynamo action. This could explain the physical mechanism for maintaining stationary non-sawtoothing “hybrid” discharges, often referred to as “flux-pumping”.

  15. Dust divertor for a tokamak fusion reactor

    SciTech Connect

    Tang, X Z; Delzanno, G L

    2009-01-01

    Micron-size tungsten particulates find equilibrium position in the magnetized plasma sheath in the normal direction of the divertor surface, but are convected poloidally and toroidally by the sonic-ion-flow drag parallel to the divertor surface. The natural circulation of dust particles in the magnetized plasma sheath can be used to set up a flowing dust shield that absorbs and exhausts most of the tokamak heat flux to the divertor. The size of the particulates and the choice of materials offer substantial room for optimization.

  16. Electrostatic Dust Detection and Removal in Tokamaks

    NASA Astrophysics Data System (ADS)

    Hensley, R.; Skinner, C. H.; Roquemore, A. L.

    2006-10-01

    The inventory of in-vessel dust particles in next-step tokamaks will increase with the rise in stored energy and pulse duration. Dust levels will need to be measured and controlled for safety reasons and to avoid plasma contamination. A novel electrostatic dust detector has been developed with a sensitivity appropriate for the carbon dust levels expected in next-step devices.^23 Higher sensitivity is desired for real-time measurements in contemporary tokamaks that have less dust. We report on results from a larger area, more sensitive detector. A 2 x 2 circuit board has two interlocking combs of copper traces spaced by 25 microns and biased at 30-50 V. The carbon test dust is delivered to the circuit board by a mesh tray vibrated at 60 Hz. The impinging dust creates a short circuit and the resulting current pulse is recorded. We will present results on the dust detection sensitivity and dust removal efficiency of these new detectors in three environments: air, vacuum, and inert gas. ^2 C. Voinier et al., J. Nucl. Mater. 346 (2005) 266-271. ^3 C. Parker et al., PPPL Report, PPPL-4169.

  17. The Spherical Tokamak MEDUSA for Costa Rica

    NASA Astrophysics Data System (ADS)

    Ribeiro, Celso; Vargas, Ivan; Guadamuz, Saul; Mora, Jaime; Ansejo, Jose; Zamora, Esteban; Herrera, Julio; Chaves, Esteban; Romero, Carlos

    2012-10-01

    The former spherical tokamak (ST) MEDUSA (Madison EDUcation Small Aspect.ratio tokamak, R<0.14m, a<0.10m, BT<0.5T, Ip<40kA, 3ms pulse)[1] is in a process of donation to Costa Rica Institute of Technology. The main objective of MEDUSA is to train students in plasma physics /technical related issues which will help all tasks of the very low aspect ratio stellarator SCR-1(A≡R/>=3.6, under design[2]) and also the ongoing activities in low temperature plasmas. Courses in plasma physics at undergraduate and post-graduate joint programme levels are regularly conducted. The scientific programme is intend to clarify several issues in relevant physics for conventional and mainly STs, including transport, heating and current drive via Alfv'en wave, and natural divertor STs with ergodic magnetic limiter[3,4]. [1] G.D.Garstka, PhD thesis, University of Wisconsin at Madison, 1997 [2] L.Barillas et al., Proc. 19^th Int. Conf. Nucl. Eng., Japan, 2011 [3] C.Ribeiro et al., IEEJ Trans. Electrical and Electronic Eng., 2012(accepted) [4] C.Ribeiro et al., Proc. 39^th EPS Conf. Contr. Fusion and Plasma Phys., Sweden, 2012

  18. Constrained ripple optimization of Tokamak bundle divertors

    SciTech Connect

    Hively, L.M.; Rome, J.A.; Lynch, V.E.; Lyon, J.F.; Fowler, R.H.; Peng, Y-K.M.; Dory, R.A.

    1983-02-01

    Magnetic field ripple from a tokamak bundle divertor is localized to a small toroidal sector and must be treated differently from the usual (distributed) toroidal field (TF) coil ripple. Generally, in a tokamak with an unoptimized divertor design, all of the banana-trapped fast ions are quickly lost due to banana drift diffusion or to trapping between the 1/R variation in absolute value vector B ..xi.. B and local field maxima due to the divertor. A computer code has been written to optimize automatically on-axis ripple subject to these constraints, while varying up to nine design parameters. Optimum configurations have low on-axis ripple (<0.2%) so that, now, most banana-trapped fast ions are confined. Only those ions with banana tips near the outside region (absolute value theta < or equal to 45/sup 0/) are lost. However, because finite-sized TF coils have not been used in this study, the flux bundle is not expanded.

  19. TIBER: tokamak ignition/burn experimental research

    SciTech Connect

    Henning, C.D.; Logan, B.G.; Barr, W.L.; Bulmer, R.H.; Doggett, J.N.; Johnston, B.M.; Hoard, R.W.; Lee, J.D.; Miller, J.R.; Slack, D.S.; Schultz, J.H.

    1985-11-01

    As part of a continuing effort by the Office of Fusion Energy to define an ignition experiment, a superconducting tokamak has been designed with thin neutron shielding and aggressive magnet and plasma parameters. By so minimizing the inner radial dimensions of the tokamak center post, coil, and shielding region, the plasma major radius is reduced, with a corresponding reduction in device costs. The peak nuclear-heating rate in the superconducting TF coils is 22 mW/cmT, which results in a steady heat load of 50 kW to the cryogenic system. Fast-wave, lower-hybrid heating would be used to induce a 10-MA current in a moderate density plasma. Then pellet fueling would raise the density to achieve ignition as the current decays in a few hundred seconds. Steady-state current drive in subignited conditions permits a 0.8 MW/mS average wall loading to study plasma and nuclear engineering effects. 10 refs., 6 figs., 3 tabs.

  20. Magnetic diagnostics for the lithium tokamak experiment.

    PubMed

    Berzak, L; Kaita, R; Kozub, T; Majeski, R; Zakharov, L

    2008-10-01

    The lithium tokamak experiment (LTX) is a spherical tokamak with R(0)=0.4 m, a=0.26 m, B(TF) approximately 3.4 kG, I(P) approximately 400 kA, and pulse length approximately 0.25 s. The focus of LTX is to investigate the novel low-recycling lithium wall operating regime for magnetically confined plasmas. This regime is reached by placing an in-vessel shell conformal to the plasma last closed flux surface. The shell is heated and then coated with liquid lithium. An extensive array of magnetic diagnostics is available to characterize the experiment, including 80 Mirnov coils (single and double axis, internal and external to the shell), 34 flux loops, 3 Rogowskii coils, and a diamagnetic loop. Diagnostics are specifically located to account for the presence of a secondary conducting surface and engineered to withstand both high temperatures and incidental contact with liquid lithium. The diagnostic set is therefore fabricated from robust materials with heat and lithium resistance and is designed for electrical isolation from the shell and to provide the data required for highly constrained equilibrium reconstructions.

  1. The ARIES-I Tokamak Reactor Study

    SciTech Connect

    Najmabadi, F; Peng, Yueng Kay Martin

    1991-01-01

    The ARIES research program is a multi-institutional effort to develop several visions of tokamak reactors with enhanced economic, safety, and environmental features. Three ARIES visions are currently planned for the ARIES program. The ARIES-I design si a DT-burning reactor based on modest extrapolation from the present tokamak physics data base; ARIES-II is a DT-burning reactor which will employ potential advances in physics; and ARIES-III is a conceptual D-{sup 3}He reactor. The first design to be completed is ARIES-I, a 1000 MWe power reactor. The key features of ARIES-I are: (1) a passively safe and low environmental impact design because of choice of low activation material throughout the fusion power core, (2) an acceptable cost of electricity, (3) a plasma with performance as close as possible to present-day experimental achievements, (4) a high performance, low activation, SiC composite blanket cooled by He, and (5) an advanced Rankine power cycle as planned for near term coal-fired plants. The ARIES-I research has also identified key physics and technology areas with the highest leverage for achieving attractive fusion power system.

  2. RF Wave Propagation and Scattering in Tokamaks

    NASA Astrophysics Data System (ADS)

    Horton, Wendell; Goniche, Marc; Arefiev, Alex; Peysson, Yves; Ekedahl, Annika; InstituteFusion Studies Collaboration; IRFM CEA Collaboration

    2016-10-01

    The propagation, scattering and absorption of the lower hybrid and electron cyclotron RF waves used to control fusion plasmas is reviewed. Drift wave turbulence driven by the steep ion and electron temperature gradients in H-mode divertor tokamaks produces strong scattering of the RF waves used for heating and plasma currents drive Both the 3-5GHz lower-hybrid (LH) and the 170GHZ electron cyclotron (EC) waves experience scattering and diffraction as propagating through the statistically complex density of the plasma. Ray equations are used to calculate the spread of the rays and the associated change in the parallel phase, polarization and group velocity of the RF waves in the propagation through the fusion plasma. A Fokker Planck equation for the phase space of the RF plasmons is one method to describe the spread of the RF wave power in the complex geometry of a divertor tokamak using the ray tracing codes. The evolution of the electron distribution function from the resonant electron-wave interactions is summarized for several scenarios. The resulting X-ray spectrum is broaden giving better agreement with the measured X-ray spectrum than that calculated in the absence of the turbulent scattering of the RF waves. M. Goniche et al., and Tore Supra Team, Phys. Plasmas 21, 2014.

  3. The external kink mode in diverted tokamaks

    DOE PAGES

    Turnbull, Alan D.; Hanson, Jeremy M.; Turco, Francesca; ...

    2016-06-16

    Here, an explanation is provided for the disruptive instability in diverted tokamaks when the safety factor at the 95% poloidal flux surface, q95, is driven below 2.0. The instability is a resistive kink counterpart to the current-driven ideal mode that traditionally explained the corresponding disruption in limited cross-sections when qedge, the safety factor at the outermost closed flux surface, lies just below a rational value. Experimentally, external kink modes are observed in limiter configurations as the current in a tokamak is ramped up and qedge decreases through successive rational surfaces. For qedge < 2, the instability is always encountered andmore » is highly disruptive. However, diverted plasmas, in which qedge is formally infinite in the magnetohydrodynamic (MHD) model, have presented a longstanding difficulty since the theory would predict stability, yet, the disruptive limit occurs in practice when q95, reaches 2. It is shown from numerical calculations that a resistive kink mode is linearly destabilized by the rapidly increasing resistivity at the plasma edge when q95 < 2, but qedge >> 2. The resistive kink behaves much like the ideal kink with predominantly kink or interchange parity and no real sign of a tearing component. However, the growth rates scale with a fractional power of the resistivity near the q = 2 surface. The results have a direct bearing on the conventional edge cutoff procedures used in most ideal MHD codes, as well as implications for ITER and for future reactor options.« less

  4. Gyrokinetic simulation of microturbulence in EAST tokamak

    NASA Astrophysics Data System (ADS)

    Xiao, Yong; Zhang, Taige; Zhao, Chen

    2014-10-01

    A complete understanding of anomalous transport is critical for designing future magnetic fusion reactors. It is generally accepted that the micro-scale turbulence leads to anomalous transport. For low beta toroidal plasmas, the electrostatic modes may dominate and ion temperature gradient (ITG) mode and trapped electron mode (TEM) are two very important candidates accounting for ion and electron turbulent transport respectively. Recently the massively parallel gyrokinetic simulation has emerged as a major tool to investigate the nonlinear physics of the turbulent transport. The newly-developed capabilities enable the gyrokinetic code GTC to simulate the turbulent transport for real tokamak plasma shape and profiles. These capabilities include a new gyrokinetic Poisson solver and zonal flow solver suitable for general plasma shape and profiles, improvements on the conventional four-point gyroaverage and newly-developed nonuniform initial marker loading. The GTC code is now able to import experimental plasma profiles and equilibrium magnetic field that come from the EFIT or TRANSP equilibrium reconstruction. Linear and nonlinear gyrokinetic simulations are carried out with the new capabilities in GTC for the electron coherent mode (ECM) recently observed in the EAST tokamak (EAST shot # 38300). We found that in the pedestal region with strong electron temperature gradient, the unstable waves propagate in the electron diamagnetic direction, showing a trapped electron mode (TEM) feature. It is also found in the collisionless limit, the linear mode frequency is higher than that from the experiment.

  5. Predicting temperature and density profiles in tokamaks

    SciTech Connect

    Bateman, G.; Kritz, A.H.; Kinsey, J.E.; Redd, A.J.; Weiland, J.

    1998-05-01

    A fixed combination of theory-based transport models, called the Multi-Mode Model, is used in the BALDUR [C. E. Singer {ital et al.}, Comput. Phys. Commun. {bold 49}, 275 (1988)] transport simulation code to predict the temperature and density profiles in tokamaks. The choice of the Multi-Mode Model has been guided by the philosophy of using the best transport theories available for the various modes of turbulence that dominate in different parts of the plasma. The Multi-Mode model has been found to provide a better match to temperature and density profiles than any of the other theory-based models currently available. A description and partial derivation of the Multi-Mode Model is presented, together with three new examples of simulations of the Tokamak Fusion Test Reactor (TFTR) [K. M. McGuire {ital et al.}, Phys. Plasmas {bold 2}, 2176 (1995)]. The first simulation shows the strong effect of recycling on the ion temperature profile in TFTR supershot simulations. The second simulation explores the effect of a plasma current ramp{emdash}where the plasma energy content changes slowly on the energy confinement time scale. The third simulation shows that the Multi-Mode Model reproduces the experimentally measured profiles when tritium is used as the hydrogenic isotope in L-mode (low confinement mode) plasmas. {copyright} {ital 1998 American Institute of Physics.}

  6. Rotation driven by fast ions in tokamaks

    SciTech Connect

    Thyagaraja, A.; Schwander, F.; McClements, K. G.

    2007-11-15

    Collective fast ion effects on flows in tokamaks are investigated analytically and numerically. A general analysis of noncollisional electrodynamic momentum transfer from fast ions to bulk plasma is presented, with polarization effects and dissipation in the bulk plasma taken into account. The analysis is illustrated using idealized simulations of fast ion orbits and radial electric fields in the Mega-Ampere Spherical Tokamak (MAST) [A. Sykes, R. J. Akers, L. C. Appel et al., Nucl. Fusion 41, 1423 (2001)], the Joint European Torus (JET) [P. H. Rebut et al., Nucl. Fusion 25, 1011 (1985)], and ITER [R. Aymar, P. Barabaschi, and Y. Shimomura, Plasma Phys. Controlled Fusion 44, 519 (2002)]. In the MAST simulation, prompt losses of beam ions injected counter to the plasma current drive up a radial electric field that saturates at a level such that beam ions subsequently injected are confined electrostatically. Although the actual radial electric fields in counterinjected MAST discharges are lower than this, the scenario explored in the simulation would be approached in MAST plasmas with sufficiently low collisionality. The JET simulation, although unrealistic, shows that a similar process could be driven by losses of fusion {alpha}-particles from a burning plasma. Test-particle simulations of {alpha}-particles in ITER suggest that performance-limiting instabilities such as neoclassical tearing modes and resistive wall modes could be affected significantly by flows associated with radial fast particle currents.

  7. Rotation driven by fast ions in tokamaks

    NASA Astrophysics Data System (ADS)

    Thyagaraja, A.; Schwander, F.; McClements, K. G.

    2007-11-01

    Collective fast ion effects on flows in tokamaks are investigated analytically and numerically. A general analysis of noncollisional electrodynamic momentum transfer from fast ions to bulk plasma is presented, with polarization effects and dissipation in the bulk plasma taken into account. The analysis is illustrated using idealized simulations of fast ion orbits and radial electric fields in the Mega-Ampère Spherical Tokamak (MAST) [A. Sykes, R. J. Akers, L. C. Appel et al., Nucl. Fusion 41, 1423 (2001)], the Joint European Torus (JET) [P. H. Rebut et al., Nucl. Fusion 25, 1011 (1985)], and ITER [R. Aymar, P. Barabaschi, and Y. Shimomura, Plasma Phys. Controlled Fusion 44, 519 (2002)]. In the MAST simulation, prompt losses of beam ions injected counter to the plasma current drive up a radial electric field that saturates at a level such that beam ions subsequently injected are confined electrostatically. Although the actual radial electric fields in counterinjected MAST discharges are lower than this, the scenario explored in the simulation would be approached in MAST plasmas with sufficiently low collisionality. The JET simulation, although unrealistic, shows that a similar process could be driven by losses of fusion α-particles from a burning plasma. Test-particle simulations of α-particles in ITER suggest that performance-limiting instabilities such as neoclassical tearing modes and resistive wall modes could be affected significantly by flows associated with radial fast particle currents.

  8. Midplane Faraday rotation: A tokamak densitometer

    NASA Astrophysics Data System (ADS)

    Jobes, F. C.

    1995-01-01

    The density in a tokamak can be determined by measuring the Faraday rotation of a laser directed tangent to the toroidal field. If there is a horizontal array of such beams, then ne(R) can be readily obtained with a simple Abel inversion about the center line of the tokamak. For a large machine, such as ITER, TPX, or JT-60, a 10.6 μm laser would be appropriate. If the machine operated at a full field of 10-50 T m and a peak density of 2.5×1020/m3, the rotation angle would be quite large—about 15°-75° per pass. An elegant measurement system can be made up from a single laser beam diffracted off a moving grating to form a fan of ˜10 probe beams. With the addition of a few optical components to the system, the return beams can be recombined and sent to a single detector. In the detector there is a separate frequency component for both the right and left hand component of each ray. These can be separated electronically to provide a reference and probe signal for each ray; the difference in phase between the two signals is twice the Faraday rotation angle.

  9. System studies for quasi-steady-state advanced physics tokamak

    SciTech Connect

    Reid, R.L.; Peng, Y.K.M.

    1983-11-01

    Parametric studies were conducted using the Fusion Engineering Design Center (FEDC) Tokamak Systems Code to investigate the impact of veriation in physics parameters and technology limits on the performance and cost of a low q/sub psi/, high beta, quasi-steady-state tokamak for the purpose of fusion engineering experimentation. The features and characteristics chosen from each study were embodied into a single Advanced Physics Tokamak design for which a self-consistent set of parameters was generated and a value of capital cost was estimated.

  10. /sup 3/He functions in tokamak-pumped laser systems

    SciTech Connect

    Jassby, D.L.

    1986-10-01

    /sup 3/He placed in an annular cell around a tokamak fusion generator can convert moderated fusion neutrons to energetic ions by the /sup 3/He(n,p)T reaction, and thereby excite gaseous lasants mixed with the /sup 3/He while simultaneously breeding tritium. The total /sup 3/He inventory is about 4 kg for large tokamak devices. Special configurations of toroidal-field magnets, neutron moderators and beryllium reflectors are required to permit nearly uniform neutron current into the laser cell with minimal attenuation. The annular laser radiation can be combined into a single output beam at the top of the tokamak.

  11. Effect of ICRF Heating on Single Particle Confinement in Tokamaks,

    DTIC Science & Technology

    1980-03-01

    80 K W WHANG. 6 .J MORALES N0001IG75C4476 W4CLASSIFlED PP"-73 ML IND 4, LAa4 5 057 Effect of ICRP Heating on Single Particle Confinement in Tokamaks ...bas =akapmwd a b 11 1Af b tmhmdin4 -2- ABSTRACT The simultaneous effect of ion heating and spatial diffusion due to ICRF heating in tokamak geometry... Tokamak confinement devices. Previous theoretical studies I1 2 of this topic have dealt with important questions related to the efficiency of the heating

  12. Nonlinear stabilization of tokamak microturbulence by fast ions.

    PubMed

    Citrin, J; Jenko, F; Mantica, P; Told, D; Bourdelle, C; Garcia, J; Haverkort, J W; Hogeweij, G M D; Johnson, T; Pueschel, M J

    2013-10-11

    Nonlinear electromagnetic stabilization by suprathermal pressure gradients found in specific regimes is shown to be a key factor in reducing tokamak microturbulence, augmenting significantly the thermal pressure electromagnetic stabilization. Based on nonlinear gyrokinetic simulations investigating a set of ion heat transport experiments on the JET tokamak, described by Mantica et al. [Phys. Rev. Lett. 107, 135004 (2011)], this result explains the experimentally observed ion heat flux and stiffness reduction. These findings are expected to improve the extrapolation of advanced tokamak scenarios to reactor relevant regimes.

  13. ECH by FEL and gyrotron sources on the Microwave Tokamak Experiment (MTX) tokamak

    SciTech Connect

    Stallard, B.W.; Turner, W.C.; Allen, S.L.; Byers, J.A.; Felker, B.; Fenstermacher, M.E.; Ferguson, S.W.; Hooper, E.G.; Thomassen, K.I.; Throop, A.L. ); Makowski, M.A. )

    1990-08-09

    The Microwave Tokamak Experiment (MTX) at LLNL is studying the physics of intense pulse ECH is a high-density tokamak plasma using a microwave FEL. Related technology development includes the FEL, a windowless quasi-optical transmission system, and other microwave components. Initial plasma experiments have been carried out at 140 GHz with single rf pulses generated using the ETA-II accelerator and the ELF wiggler. Peak power levels up to 0.2 GW and pulse durations up to 10 ns were achieved for injection into the plasma using as untapered wiggler. FEL pulses were transmitted over 33 m from the FEL to MTX using six mirrors mounted in a 50-cm-diam evacuated pipe. Measurements of the microwave beam and transmission through the plasma were carried out. For future rapid pulse experiments at high average power (4 GW peak power, 5kHz pulse rate, and {bar P} > 0.5 MW) using the IMP wiggler with tapered magnetic field, a gyrotron (140 GHz, 400 kW cw or up to 1 MW short pulse) is being installed to drive the FEL input or to directly heat the tokamak plasma at full gyrotron power. Quasi-optic techniques will be used to couple the gyrotron power. For direct plasma heating, the gyrotron will couple into the existing mirror transport system. Using both sources of rf generation, experiments are planned to investigate intense pulse absorption and tokamak physics, such as the ECH of a pellet-fueled plasma and plasma control using localized heating. 12 refs., 9 figs.

  14. ECH by FEL and gyrotron sources on the Microwave Tokamak Experiment (MTX) tokamak

    NASA Astrophysics Data System (ADS)

    Stallard, B. W.; Turner, W. C.; Allen, S. L.; Byers, J. A.; Felker, B.; Fenstermacher, M. E.; Ferguson, S. W.; Hooper, E. G.; Thomassen, K. I.; Throop, A. L.

    1990-08-01

    The Microwave Tokamak Experiment (MTX) at LLNL is studying the physics of intense pulse ECH is a high-density tokamak plasma using a microwave FEL. Related technology development includes the FEL, a windowless quasi-optical transmission system, and other microwave components. Initial plasma experiments have been carried out at 140 GHz with single RF pulses generated using the ETA-2 accelerator and the ELF wiggler. Peak power levels up to 0.2 GW and pulse durations up to 10 ns were achieved for injection into the plasma using as untapered wiggler. FEL pulses were transmitted over 33 m from the FEL to MTX using six mirrors mounted in a 50 cm diam evacuated pipe. Measurements of the microwave beam and transmission through the plasma were carried out. For future rapid pulse experiments at high average power (4 GW peak power, 5 kHz pulse rate, and bar P is greater than 0.5 MW) using the IMP wiggler with tapered magnetic field, a gyrotron (140 GHz, 400 kW CW or up to 1 MW short pulse) is being installed to drive the FEL input or to directly heat the tokamak plasma at full gyrotron power. Quasi-optic techniques will be used to couple the gyrotron power. For direct plasma heating, the gyrotron will couple into the existing mirror transport system. Using both sources of RF generation, experiments are planned to investigate intense pulse absorption and tokamak physics, such as the ECH of a pellet-fueled plasma and plasma control using localized heating.

  15. TFTR/JET INTOR workshop on plasma transport tokamaks

    SciTech Connect

    Singer, C.E.

    1985-01-01

    This report summarizes the proceedings of a Workshop on transport models for prediction and analysis of tokamak plasma confinement. Summaries of papers on theory, predictive modeling, and data analysis are included.

  16. On Stochastic Control of Tokamak and Artificial Intelligence

    NASA Astrophysics Data System (ADS)

    Rastovic, Danilo

    2007-12-01

    Instead of the theory of invariant manifolds and entropy reduction, the theory of fractional Brownian motions and artificiall neural networks is used for description of advanced methods for control of tokamak plasma behaviour.

  17. Tokamak reactor cost model based on STARFIRE/WILDCAT costing

    SciTech Connect

    Evans, K. Jr.

    1983-03-01

    A cost model is presented which is useful for survey and comparative studies of tokamak reactors. The model is heavily based on STARFIRE and WILDCAT costing guidelines, philosophies, and procedures and reproduces the costing for these devices quite accurately.

  18. Improvement of tokamak performance by injection of electrons

    SciTech Connect

    Ono, Masayuki

    1992-12-01

    Concepts for improving tokamak performance by utilizing injection of hot electrons are discussed. Motivation of this paper is to introduce the research work being performed in this area and to refer the interested readers to the literature for more detail. The electron injection based concepts presented here have been developed in the CDX, CCT, and CDX-U tokamak facilities. The following three promising application areas of electron injection are described here: 1. Non-inductive current drive, 2. Plasma preionization for tokamak start-up assist, and 3. Charging-up of tokamak flux surfaces for improved plasma confinement. The main motivation for the dc-helicity injection current drive is in its efficiency that, in theory, is independent of plasma density. This property makes it attractive for driving currents in high density reactor plasmas.

  19. Diagnosing transient plasma status: from solar atmosphere to tokamak divertor

    NASA Astrophysics Data System (ADS)

    Giunta, A. S.; Henderson, S.; O'Mullane, M.; Harrison, J.; Doyle, J. G.; Summers, H. P.

    2016-09-01

    This work strongly exploits the interdisciplinary links between astrophysical (such as the solar upper atmosphere) and laboratory plasmas (such as tokamak devices) by sharing the development of a common modelling for time-dependent ionisation. This is applied to the interpretation of solar flare data observed by the UVSP (Ultraviolet Spectrometer and Polarimeter), on-board the Solar Maximum Mission and the IRIS (Interface Region Imaging Spectrograph), and also to data from B2-SOLPS (Scrape Off Layer Plasma Simulations) for MAST (Mega Ampère Spherical Tokamak) Super-X divertor upgrade. The derived atomic data, calculated in the framework of the ADAS (Atomic Data and Analysis Structure) project, allow equivalent prediction in non-stationary transport regimes and transients of both the solar atmosphere and tokamak divertors, except that the tokamak evolution is about one thousand times faster.

  20. Cash boost for UK’s MAST tokamak

    NASA Astrophysics Data System (ADS)

    2017-06-01

    The Mega Amp Spherical Tokamak (MAST) at the Culham Centre for Fusion Energy in Oxfordshire, UK, has received £21m for a series of upgrades to study the best way to extract waste fuel from the plasma it contains.

  1. An emerging understanding of H-mode discharges in tokamaks

    SciTech Connect

    Groebner, R.J.

    1992-12-01

    A remarkable degree of consistency of experimental results from tokamaks throughout the world has developed with regard to the phenomenology of the transition from L-mode to H-mode confinement in tokamaks. The transition is initiated in a narrow layer at the plasma periphery where density fluctuations are suppressed and steep gradients of temperature and density form in a region with large first and second radial derivatives in the [upsilon][sub E][sup [yields

  2. Experimental observations and modelling of intrinsic rotation reversals in tokamaks

    NASA Astrophysics Data System (ADS)

    Camenen, Y.; Angioni, C.; Bortolon, A.; Duval, B. P.; Fable, E.; Hornsby, W. A.; McDermott, R. M.; Na, D. H.; Na, Y.-S.; Peeters, A. G.; Rice, J. E.

    2017-03-01

    The progress made in understanding spontaneous toroidal rotation reversals in tokamaks is reviewed and current ideas to solve this ten-year-old puzzle are explored. The paper includes a summarial synthesis of the experimental observations in AUG, C-Mod, KSTAR, MAST and TCV tokamaks, reasons why turbulent momentum transport is thought to be responsible for the reversals, a review of the theory of turbulent momentum transport and suggestions for future investigations.

  3. Design of a microwave calorimeter for the microwave tokamak experiment

    SciTech Connect

    Marinak, M. )

    1988-10-07

    The initial design of a microwave calorimeter for the Microwave Tokamak Experiment is presented. The design is optimized to measure the refraction and absorption of millimeter rf microwaves as they traverse the toroidal plasma of the Alcator C tokamak. Techniques utilized can be adapted for use in measuring high intensity pulsed output from a microwave device in an environment of ultra high vacuum, intense fields of ionizing and non-ionizing radiation and intense magnetic fields. 16 refs.

  4. Fast tomographic methods for the tokamak ISTTOK

    NASA Astrophysics Data System (ADS)

    Carvalho, P. J.; Thomsen, H.; Gori, S.; Toussaint, U. v.; Weller, A.; Coelho, R.; Neto, A.; Pereira, T.; Silva, C.; Fernandes, H.

    2008-04-01

    The achievement of long duration, alternating current discharges on the tokamak IST-TOK requires a real-time plasma position control system. The plasma position determination based on magnetic probes system has been found to be inadequate during the current inversion due to the reduced plasma current. A tomography diagnostic has been therefore installed to supply the required feedback to the control system. Several tomographic methods are available for soft X-ray or bolo-metric tomography, among which the Cormack and Neural networks methods stand out due to their inherent speed of up to 1000 reconstructions per second, with currently available technology. This paper discusses the application of these algorithms on fusion devices while comparing performance and reliability of the results. It has been found that although the Cormack based inversion proved to be faster, the neural networks reconstruction has fewer artifacts and is more accurate.

  5. Tearing mode analysis in tokamaks, revisited

    SciTech Connect

    Nishimura, Y.; Callen, J.D.; Hegna, C.C.

    1998-12-01

    A new {Delta}{sup {prime}} shooting code has been developed to investigate tokamak plasma tearing mode stability in a cylinder and large aspect ratio ({epsilon}{le}0.25) toroidal geometries, neglecting toroidal mode coupling. A different computational algorithm is used (shooting out from the singular surface instead of into it) to resolve the strong singularities at the mode rational surface, particularly in the presence of the finite pressure term. Numerical results compare favorably with Furth {ital et al.} [H. P. Furth {ital et al.}, Phys. Fluids {bold 16}, 1054 (1973)] results. The effects of finite pressure, which are shown to decrease {Delta}{sup {prime}}, are discussed. It is shown that the distortion of the flux surfaces by the Shafranov shift, which modifies the geometry metric elements, stabilizes the tearing mode significantly, even in a low-{beta} regime before the toroidal magnetic curvature effects come into play. {copyright} {ital 1998 American Institute of Physics.}

  6. Decommissioning of the Tokamak Fusion Test Reactor

    SciTech Connect

    E. Perry; J. Chrzanowski; C. Gentile; R. Parsells; K. Rule; R. Strykowsky; M. Viola

    2003-10-28

    The Tokamak Fusion Test Reactor (TFTR) at the Princeton Plasma Physics Laboratory was operated from 1982 until 1997. The last several years included operations with mixtures of deuterium and tritium. In September 2002, the three year Decontamination and Decommissioning (D&D) Project for TFTR was successfully completed. The need to deal with tritium contamination as well as activated materials led to the adaptation of many techniques from the maintenance work during TFTR operations to the D&D effort. In addition, techniques from the decommissioning of fission reactors were adapted to the D&D of TFTR and several new technologies, most notably the development of a diamond wire cutting process for complex metal structures, were developed. These techniques, along with a project management system that closely linked the field crews to the engineering staff who developed the techniques and procedures via a Work Control Center, resulted in a project that was completed safely, on time, and well below budget.

  7. Cooldown of the Compact Ignition Tokamak

    SciTech Connect

    Keeton, D.C.

    1987-08-01

    Cooldown of the Compact Ignition Tokamak (CIT) with the baseline liquid nitrogen cooling system was analyzed. On the basis of this analysis and present knowledge of the two-phase heat transfer, the current baseline CIT can be cooled down in about 1.5 h. An extensive heat transfer test program is recommended to reduce uncertainty in the heat transfer performance and to explore methods for minimizing the cooldown time. An alternate CIT cooldown system is described which uses a pressurized gaseous helium coolant in a closed-loop system. It is shown analytically that this system will cool down the CIT well within 1 h. Confidence in this analysis is sufficiently high that a heat transfer test program would not be necessary. The added cost of this alternate system is estimated to be about $5.3 million. This helium cooling system represents a reasonable backup approach to liquid nitrogen cooling of the CIT. 3 refs., 12 figs., 3 tabs.

  8. Diagnostics modules for tokamak disruption experiments

    SciTech Connect

    Nahm, M.L.; Buchanan, C.D.; Bourham, M.A.; Gilligan, J.G.

    1994-11-01

    Diagnostic modules equipped with various sensors can provide useful information on key parameters for disruption events, e.g. energy deposition, vapor shielding effect, plasma pressure and force distribution. The modules are, basically, DIMES samples (Divertor Materials Evaluation System) equipped with sensors, coupled to digitizing units and interfaced to a data acquisition system. The DIMES samples are part of the lower diverter diagnostics on the DIII-D tokamak. Three top-cap prototype diagnostics modules have been designed and fabricated. The initial testing and calibration have been performed using the SIRENS plasma gun at an energy deposition of 1 to 12 MJ/m{sup 2} over 0.1 to 1.0 ms, with a plasma pressure >100 MPa.

  9. Passive runaway electron suppression in tokamak disruptions

    SciTech Connect

    Smith, H. M.; Helander, P.

    2013-07-15

    Runaway electrons created in disruptions pose a serious problem for tokamaks with large current. It would be desirable to have a runaway electron suppression method which is passive, i.e., a method that does not rely on an uncertain disruption prediction system. One option is to let the large electric field inherent in the disruption drive helical currents in the wall. This would create ergodic regions in the plasma and increase the runaway losses. Whether these regions appear at a suitable time and place to affect the formation of the runaway beam depends on disruption parameters, such as electron temperature and density. We find that it is difficult to ergodize the central plasma before a beam of runaway current has formed. However, the ergodic outer region will make the Ohmic current profile contract, which can lead to instabilities that yield large runaway electron losses.

  10. Argonne Plasma Engineering Experiment (APEX) Tokamak

    SciTech Connect

    Norem, J.H.; Balka, L.J.; Kulovitz, E.E.; Magill, S.R.; McGhee, D.G.; Moretti, A.; Praeg, W.F.

    1981-03-01

    The Argonne Plasma Engineering Experiment (APEX) Tokamak was designed to provide hot plasmas for reactor-relevant experiments with rf heating (current drive) and plasma wall experiments, principally in-situ low-Z wall coating and maintenance. The device, sized to produce energetic plasmas at minimum cost, is small (R = 51 cm, r = 15 cm) but capable of high currents (100 kA) and long pulse durations (100 ms). A design using an iron central core with no return legs, pure tension tapewound toroidal field coils, digital radial position control, and UHV vacuum technology was used. Diagnostics include monochrometers, x-ray detectors, and a microwave interferometer and radiometer for density and temperature measurements. Stable 100 ms shots were produced with electron temperatures in the range 500 to 1000 eV. Initial results included studies of thermal desorption and recoating of wall materials.

  11. Tokamak Simulation Code modeling of NSTX

    SciTech Connect

    S.C. Jardin; S. Kaye; J. Menard; C. Kessel; A.H. Glasser

    2000-07-20

    The Tokamak Simulation Code [TSC] is widely used for the design of new axisymmetric toroidal experiments. In particular, TSC was used extensively in the design of the National Spherical Torus eXperiment [NSTX]. The authors have now benchmarked TSC with initial NSTX results and find excellent agreement for plasma and vessel currents and magnetic flux loops when the experimental coil currents are used in the simulations. TSC has also been coupled with a ballooning stability code and with DCON to provide stability predictions for NSTX operation. TSC has also been used to model initial CHI experiments where a large poloidal voltage is applied to the NSTX vacuum vessel, causing a force-free current to appear in the plasma. This is a phenomenon that is similar to the plasma halo current that sometimes develops during a plasma disruption.

  12. Toroidal microinstability studies of high temperature tokamaks

    SciTech Connect

    Rewoldt, G.; Tang, W.M.

    1989-07-01

    Results from comprehensive kinetic microinstability calculations are presented showing the effects of toroidicity on the ion temperature gradient mode and its relationship to the trapped-electron mode in high-temperature tokamak plasmas. The corresponding particle and energy fluxes have also been computed. It is found that, although drift-type microinstabilities persist over a wide range of values of the ion temperature gradient parameter /eta//sub i/ /equivalent to/ (dlnT/sub i//dr)/(dlnn/sub i//dr), the characteristic features of the dominant mode are those of the /eta//sub i/-type instability when /eta//sub i/ > /eta//sub ic/ /approximately/1.2 to 1.4 and of the trapped-electron mode when /eta//sub i/ < /eta//sub ic/. 16 refs., 7 figs.

  13. Control of Asymmetric Magnetic Perturbations in Tokamaks

    SciTech Connect

    Park, Jong-kyu; Schaffer, Michael J.; Menard, Jonathan E.; Boozer, Allen H.

    2007-10-03

    The sensitivity of tokamak plasmas to very small deviations from the axisymmetry of the magnetic field |δ→(over)Β/→(over)Β|≈ 10–4 is well known. What was not understood until very recently is the importance of the perturbation to the plasma equilibrium in assessing the effects of externally produced asymmetries in the magnetic field, even far from a stability limit. DIII-D and NSTX experiments find that when the deleterious effects of asymmetries are mitigated, the external asymmetric field was often made stronger and with an increased interaction with the magnetic field of the unperturbed equilibrium fields. This paper explains these counter intuitive results. The explanation using ideal perturbed equilibria has important implications for the control of field errors in all toroidal plasmas.

  14. Nusselt number scaling in tokamak plasma turbulence

    SciTech Connect

    Takeda, K.; Benkadda, S.; Hamaguchi, S.; Wakatani, M.

    2005-05-15

    Anomalous heat transport caused by ion temperature gradient (ITG) driven turbulence in tokamak plasmas is evaluated from numerical simulations of the two-dimensional (2D) partial-differential equations of the ITG model and of a reduced 1D version derived from a quasilinear approximation. In the strongly turbulent state, intermittent bursts of thermal transport are observed in both cases. In the strongly turbulent regime, the reduced model as well as the direct numerical simulation show that the Nusselt number Nu (normalized heat flux) scales with the normalized ion pressure gradient K{sub i} as Nu{proportional_to}K{sub i}{sup 1/3}. Since the Rayleigh number for ITG turbulence is proportional to K{sub i}, the Nusselt number scaling for ITG turbulence is thus similar to the classical thermal transport scaling for Rayleigh-Benard convections in neutral fluids.

  15. Control of asymmetric magnetic perturbations in tokamaks.

    PubMed

    Park, Jong-Kyu; Schaffer, Michael J; Menard, Jonathan E; Boozer, Allen H

    2007-11-09

    The sensitivity of tokamak plasmas to very small deviations from the axisymmetry of the magnetic field |deltaB/B| approximately 10{-4} is well known. What was not understood until very recently is the importance of the perturbation to the plasma equilibrium in assessing the effects of externally produced asymmetries in the magnetic field, even far from a stability limit. DIII-D and NSTX experiments find that when the deleterious effects of asymmetries are mitigated, the external asymmetric field was often made stronger and had an increased interaction with the magnetic field of the unperturbed equilibrium. This Letter explains these counterintuitive results. The explanation using ideal perturbed equilibria has important implications for the control of field errors in all toroidal plasmas.

  16. Transport bifurcation in a rotating tokamak plasma.

    PubMed

    Highcock, E G; Barnes, M; Schekochihin, A A; Parra, F I; Roach, C M; Cowley, S C

    2010-11-19

    The effect of flow shear on turbulent transport in tokamaks is studied numerically in the experimentally relevant limit of zero magnetic shear. It is found that the plasma is linearly stable for all nonzero flow shear values, but that subcritical turbulence can be sustained nonlinearly at a wide range of temperature gradients. Flow shear increases the nonlinear temperature gradient threshold for turbulence but also increases the sensitivity of the heat flux to changes in the temperature gradient, except over a small range near the threshold where the sensitivity is decreased. A bifurcation in the equilibrium gradients is found: for a given input of heat, it is possible, by varying the applied torque, to trigger a transition to significantly higher temperature and flow gradients.

  17. Fast tomographic methods for the tokamak ISTTOK

    SciTech Connect

    Carvalho, P. J.; Coelho, R.; Neto, A.; Pereira, T.; Silva, C.; Fernandes, H.; Gori, S.; Toussaint, U. v.

    2008-04-07

    The achievement of long duration, alternating current discharges on the tokamak IST-TOK requires a real-time plasma position control system. The plasma position determination based on magnetic probes system has been found to be inadequate during the current inversion due to the reduced plasma current. A tomography diagnostic has been therefore installed to supply the required feedback to the control system. Several tomographic methods are available for soft X-ray or bolo-metric tomography, among which the Cormack and Neural networks methods stand out due to their inherent speed of up to 1000 reconstructions per second, with currently available technology. This paper discusses the application of these algorithms on fusion devices while comparing performance and reliability of the results. It has been found that although the Cormack based inversion proved to be faster, the neural networks reconstruction has fewer artifacts and is more accurate.

  18. Anisotropic pressure tokamak equilibrium and stability considerations

    SciTech Connect

    Salberta, E.R.; Grimm, R.C.; Johnson, J.L.; Manickam, J.; Tang, W.M.

    1987-02-01

    Investigation of the effect of pressure anisotropy on tokamak equilibrium and stability is made with an MHD model. Realistic perpendicular and parallel pressure distributions, P/sub perpendicular/(psi,B) and P/sub parallel/(psi,B), are obtained by solving a one-dimensional Fokker-Planck equation for neutral beam injection to find a distribution function f(E, v/sub parallel//v) at the position of minimum field on each magnetic surface and then using invariance of the magnetic moment to determine its value at each point on the surface. The shift of the surfaces of constant perpendicular and parallel pressure from the flux surfaces depends strongly on the angle of injection. This shift explains the observed increase or decrease in the stability conditions. Estimates of the stabilizing effect of hot trapped ions indicates that a large fraction must be nonresonant and thus decoupled from the bad curvature before it becomes important.

  19. Equilibrium properties on the EAST superconducting tokamak

    NASA Astrophysics Data System (ADS)

    Qian, J. P.; Wan, B. N.; Lao, L. L.; Shen, B.; Sabbagh, S. A.; Menard, J.; Sun, Y. W.; Duan, Y. M.; Li, J. H.; Xiao, B. J.; Gong, X. Z.; Gong

    2009-06-01

    The Experimental Advanced Superconducting Tokamak (EAST) has a major radius of R0 = 1.75 m and a midplane halfwidth of 0.5 m. It has been operated with a toroidal magnetic field B0 = 2 T and Ip ≤ 500 kA. The evolution of the plasma equilibrium is analysed between discharges by Equilibrium Fitting Code (EFIT). Limiter, single-null and double-null diverted configurations have been produced. A plasma elongation in the range 1.3 ≤ κ ≤ 1.9 and a triangularity in the range 0.1 ≤ δ ≤ 0.55 have been sustained. The operation space of elongated discharges is also presented based on the EAST database.

  20. Neutral Beam Injection in the Electric Tokamak

    NASA Astrophysics Data System (ADS)

    Gourdain, P.-A.; Carter, T. A.; Gauvreau, J.-L.; Grossman, A.; Lafonteese, D. J.; Pace, D. C.; Schmitz, L. W.; Taylor, R. J.; White, A. E.; Yates, T. F.

    2004-11-01

    The Electric Tokamak (ET) at UCLA (Bt=0.25T, R=5m, a=1m, Te(0)=300eV, tau(0)=1s) is now running long shots (5s). A new development program was started last year to include a neutral beam in the daily operations of the machine. As a result, a 10kV neutral beam injector was built to deal with plasma and measurement issues. The design and parameters of the beam are discussed. The source is based on an RF generated plasma, with a single extraction grid providing an accel-decel configuration. Plasma neutralization efficiency is also presented. Co- or counter injection is now possible using a single beam. The construction of a second beam is planned for simultaneous co- and counter injections for toroidal momentum input control. Plasma toroidal and poloidal rotation, particle diffusion and current drive effects will be presented.

  1. Instrumentation and controls of an ignited tokamak

    SciTech Connect

    Becraft, W.R.; Golzy, J.; Houlberg, W.A.; Kukielka, C.A.; Onega R.J.; Raju, G.V.S.; Stone, R.S.

    1980-10-01

    The instrumentation and controls (I and C) of an ignited plasma magnetically confined in a tokamak configuration needs increased emphasis in the following areas: (1) physics implications for control; (2) plasma shaping/position control; and (3) control to prevent disruptive instabilities. This document reports on the FY 1979 efforts in these and other areas. Also presented are discusssions in the areas of: (1) diagnostics suitable for the Engineering Test Facility (ETF); and (2) future research and development (R and D) needs. The appendices focus attention on some preliminary ideas about the measurement of the deuteron-triton (D-T) ratio in the plasma, synchrotron radiation, and divertor control. Finally, an appendix documenting the thermal consequences to the first wall of a MPD is presented.

  2. Plasma rotation in the PDX tokamak

    SciTech Connect

    Brau, K.; Bitter, M.; Goldston, R.J.; Manos, D.; McGuire, K.; Suckewer, S.

    1983-06-01

    Toroidal and poloidal rotation has been measured in the Poloidal Divertor Experiment (PDX) tokamak in ohmic- and neutral-beam-heated plasmas in a variety of discharge conditions and in both circular and diverted configurations. Rotation velocities were deduced from Doppler shifts of magnetic dipole (M1) lines and lines of optically allowed transitions in the visible and uv regions, from K/sub ..cap alpha../ emission, and also from an array of magnetic pickup loops. Poloidal and toroidal rotation velocities in ohmically heated discharges were unusually less than 3 x 10/sup 5/ cm/sec. Near the plasma edge the toroidal-rotation velocity varies with poloidal angle both before and during neutral-beam injection. No systematic poloidal rotation was observed during neutral-beam injection centered about or displaced 10 cm from the horizontal midplane, which implies that the poloidal damping time tau/sub theta/ < 0.5 tau/sub ii/, consistent with theoretical estimates.

  3. A lithium deposition system for tokamak devices*

    NASA Astrophysics Data System (ADS)

    Graziul, Christopher; Majeski, Richard; Kaita, Robert; Hoffman, Daniel; Timberlake, John; Card, David

    2002-11-01

    The production of a lithium deposition system using commercially available components is discussed. This system is intended to provide a fresh lithium wall coating between discharges in a tokamak. For this purpose, a film 100-200 Å thick is sufficient to ensure that the plasma interacts solely with the lithium. A test system consisting of a lithium evaporator and a deposition monitor has been designed and constructed to investigate deposition rates and coverage. A Thermionics 3kW e-gun is used to rapidly evaporate small amounts of solid lithium. An Inficon XTM/2 quartz deposition monitor then measures deposition rate at varying distances, positions and angles relative to the e-gun crucible. Initial results from the test system will be presented. *Supported by US DOE contract #DE-AC02-76CH-03073

  4. Status of ECRH project on EAST Tokamak

    SciTech Connect

    Wang, Xiaojie; Liu, Fukun; Shan, Jiafang; Xu, Handong; Wu, Dajun; Li, Bo; Zhang, Jiang; Huang, Yiyun; Tang, Yunying; Xu, Weiye; Hu, Huaichuan; Wang, Jian; Xu, Li; Wei, Wei

    2014-02-12

    A 140GHz electron cyclotron resonance heating and current drive (EC H and CD) project for EAST Tokamak is launched in 2011 with a total power of 4MW and pulse length of 100 s. The main objectives of the system are to provide central H and CD, assist start-up and control of MHD activities. The system comprises four gyrotrons each with nominal output power of 1MW at 140GHz. The RF power, transmitted through four evacuated corrugated waveguides will be injected into plasma from the low field side (radial port). The front steering equatorial launcher directs the RF beam over ±25° toroidally and scans over 38° poloidally. At present, the construction of the first 1MW system is undergoing for the expected campaign in the end of 2013. In this paper, the current status of the development and the design of the 140-GHz ECRH system are presented.

  5. TRAIL: a tokamak rail gun limiter

    SciTech Connect

    Yu, W.S.; Powell, J.R.; Usher, J.L.

    1980-01-01

    An attractive new limiter concept is investigated. The TRAIL (Tokamak Rail Gun Limiter) system impacts a stream of moderate velocity pellets (100 to 200 m/sec through the plasma edge region to absorb energy and define the plasma boundary. The pellets are recycled, after cooling, to the injector in an E-M mass accelerator. Heat fluxes of approx. 30,000 W/cm/sup 2/ can be readily accommodated by the pellets, with very low recirculating power requirements (approx. 0.1%) for the accelerator. The mass accelerator velocity requirements are well within the present state-of-the-art (several km/sec). Accelerators injecting pellets at approx. 1 km/sec can be used to control local plasma temperature and current profiles and to act as energy absorbers to shut down the plasma without damage to the first wall if a plasma disruption occurs.

  6. Tokamak current driven by poloidally asymmetric fueling

    SciTech Connect

    Helander, P.; Fueloep, T.; Lisak, M.

    2006-10-15

    It is shown that poloidally asymmetric particle transport or fueling in a tokamak generally produces an electric current parallel to the magnetic field, in particular if the transport or fueling is up-down asymmetric. For instance, a current arises in the edge region if most particle transport across the last closed flux surface occurs in the midplane while most refueling comes from recycling near the X-point. This current is negative relative to the bulk plasma current (and thus stabilizing to peeling modes) if the ion drift is toward the X-point, and changes direction if the magnetic field is reversed. However, this current appears to be smaller than the pedestal bootstrap current under typical conditions.

  7. Transport Bifurcation in a Rotating Tokamak Plasma

    SciTech Connect

    Highcock, E. G.; Barnes, M.; Schekochihin, A. A.; Parra, F. I.; Roach, C. M.; Cowley, S. C.

    2010-11-19

    The effect of flow shear on turbulent transport in tokamaks is studied numerically in the experimentally relevant limit of zero magnetic shear. It is found that the plasma is linearly stable for all nonzero flow shear values, but that subcritical turbulence can be sustained nonlinearly at a wide range of temperature gradients. Flow shear increases the nonlinear temperature gradient threshold for turbulence but also increases the sensitivity of the heat flux to changes in the temperature gradient, except over a small range near the threshold where the sensitivity is decreased. A bifurcation in the equilibrium gradients is found: for a given input of heat, it is possible, by varying the applied torque, to trigger a transition to significantly higher temperature and flow gradients.

  8. Vertically stabilized elongated cross-section tokamak

    DOEpatents

    Sheffield, George V.

    1977-01-01

    This invention provides a vertically stabilized, non-circular (minor) cross-section, toroidal plasma column characterized by an external separatrix. To this end, a specific poloidal coil means is added outside a toroidal plasma column containing an endless plasma current in a tokamak to produce a rectangular cross-section plasma column along the equilibrium axis of the plasma column. By elongating the spacing between the poloidal coil means the plasma cross-section is vertically elongated, while maintaining vertical stability, efficiently to increase the poloidal flux in linear proportion to the plasma cross-section height to achieve a much greater plasma volume than could be achieved with the heretofore known round cross-section plasma columns. Also, vertical stability is enhanced over an elliptical cross-section plasma column, and poloidal magnetic divertors are achieved.

  9. Gas Fuelling System for SST-1Tokamak

    NASA Astrophysics Data System (ADS)

    Dhanani, Kalpesh; Raval, D. C.; Khan, Ziauddin; Semwal, Pratibha; George, Siju; Paravastu, Yuvakiran; Thankey, Prashant; Khan, M. S.; Pradhan, Subrata

    2017-04-01

    SST-1 Tokamak, the first Indian Steady-state Superconducting experimental device is at present under operation in the Institute for Plasma Research. For plasma break down & initiation, piezoelectric valve based gas feed system is implemented as a primary requirement due to its precise control, easy handling, low construction and maintenance cost and its flexibility in the selection of the working gas. Hydrogen gas feeding with piezoelectric valve is used in the SST-1 plasma experiments. The piezoelectric valves used in SST-1 are remotely driven by a PXI based platform and are calibrated before each SST-1 plasma operation with precise control. This paper will present the technical development and the results of the gas fuelling system of SST-1.

  10. Nonlinear lower hybrid modeling in tokamak plasmas

    SciTech Connect

    Napoli, F.; Schettini, G.; Castaldo, C.; Cesario, R.

    2014-02-12

    We present here new results concerning the nonlinear mechanism underlying the observed spectral broadening produced by parametric instabilities occurring at the edge of tokamak plasmas in present day LHCD (lower hybrid current drive) experiments. Low frequency (LF) ion-sound evanescent modes (quasi-modes) are the main parametric decay channel which drives a nonlinear mode coupling of lower hybrid (LH) waves. The spectrum of the LF fluctuations is calculated here considering the beating of the launched LH wave at the radiofrequency (RF) operating line frequency (pump wave) with the noisy background of the RF power generator. This spectrum is calculated in the frame of the kinetic theory, following a perturbative approach. Numerical solutions of the nonlinear LH wave equation show the evolution of the nonlinear mode coupling in condition of a finite depletion of the pump power. The role of the presence of heavy ions in a Deuterium plasma in mitigating the nonlinear effects is analyzed.

  11. Resistive edge mode instability in stellarator and tokamak geometries

    SciTech Connect

    Mahmood, M. Ansar; Rafiq, T.; Persson, M.; Weiland, J.

    2008-09-15

    Geometrical effects on linear stability of electrostatic resistive edge modes are investigated in the three-dimensional Wendelstein 7-X stellarator [G. Grieger et al., Plasma Physics and Controlled Nuclear Fusion Research 1990 (International Atomic Energy Agency, Vienna, 1991), Vol. 3, p. 525] and the International Thermonuclear Experimental Reactor [Progress in the ITER Physics Basis, Nucl. Fusion 7, S1, S285 (2007)]-like equilibria. An advanced fluid model is used for the ions together with the reduced Braghinskii equations for the electrons. Using the ballooning mode representation, the drift wave problem is set as an eigenvalue equation along a field line and is solved numerically using a standard shooting technique. A significantly larger magnetic shear and a less unfavorable normal curvature in the tokamak equilibrium are found to give a stronger finite-Larmor radius stabilization and a more narrow mode spectrum than in the stellarator. The effect of negative global magnetic shear in the tokamak is found to be stabilizing. The growth rate on a tokamak magnetic flux surface is found to be comparable to that on a stellarator surface with the same global magnetic shear but the eigenfunction in the tokamak is broader than in the stellarator due to the presence of large negative local magnetic shear (LMS) on the tokamak surface. A large absolute value of the LMS in a region of unfavorable normal curvature is found to be stabilizing in the stellarator, while in the tokamak case, negative LMS is found to be stabilizing and positive LMS destabilizing.

  12. Resistive edge mode instability in stellarator and tokamak geometries

    NASA Astrophysics Data System (ADS)

    Mahmood, M. Ansar; Rafiq, T.; Persson, M.; Weiland, J.

    2008-09-01

    Geometrical effects on linear stability of electrostatic resistive edge modes are investigated in the three-dimensional Wendelstein 7-X stellarator [G. Grieger et al., Plasma Physics and Controlled Nuclear Fusion Research 1990 (International Atomic Energy Agency, Vienna, 1991), Vol. 3, p. 525] and the International Thermonuclear Experimental Reactor [Progress in the ITER Physics Basis, Nucl. Fusion 7, S1, S285 (2007)]-like equilibria. An advanced fluid model is used for the ions together with the reduced Braghinskii equations for the electrons. Using the ballooning mode representation, the drift wave problem is set as an eigenvalue equation along a field line and is solved numerically using a standard shooting technique. A significantly larger magnetic shear and a less unfavorable normal curvature in the tokamak equilibrium are found to give a stronger finite-Larmor radius stabilization and a more narrow mode spectrum than in the stellarator. The effect of negative global magnetic shear in the tokamak is found to be stabilizing. The growth rate on a tokamak magnetic flux surface is found to be comparable to that on a stellarator surface with the same global magnetic shear but the eigenfunction in the tokamak is broader than in the stellarator due to the presence of large negative local magnetic shear (LMS) on the tokamak surface. A large absolute value of the LMS in a region of unfavorable normal curvature is found to be stabilizing in the stellarator, while in the tokamak case, negative LMS is found to be stabilizing and positive LMS destabilizing.

  13. A programmatic framework for the Tokamak Physics Experiment (TPX)

    SciTech Connect

    Thomassen, K.I. ); Goldston, R.J. ); Neilson, G.H. )

    1993-09-01

    Significant advances have been made in the confinement of reactor-grade plasmas, so that the authors are now preparing for experiments at the [open quotes]power breakeven[close quotes] level in the JET and TFTR experiments. In ITER the authors will extend the performance of tokamaks into the burning plasma regime, develop the technology of fusion reactors, and produce over a gigawatt of fusion power. Besides taking these crucial steps toward the technical feasibility of fusion, the authors must also take steps to ensure its economic acceptability. The broad requirements for economically attractive tokamak reactors based on physics advancements have been set forth in a number of studies. An advanced physics data base is emerging from a physics program of concept improvement using existing tokamaks around the world. This concept improvements program is emerging as the primary focus of the US domestic tokamak program, and a key element of that program is the proposed Tokamak Physics Experiment (TPX). With TPX the authors can develop the scientific data base for compact, continuously-operating fusion reactors, using advanced steady-state control techniques to improve plasma performance. The authors can develop operating techniques needed to ensure the success of ITER and provide first-time experience with several key fusion reactor technologies. This paper explains the relationships of TPX to the current US fusion physics program, to the ITER program, and to the development of an attractive tokamak demonstration plant for this next stage in the fusion program.

  14. The external kink mode in diverted tokamaks

    SciTech Connect

    Turnbull, Alan D.; Hanson, Jeremy M.; Turco, Francesca; Ferraro, Nathaniel M.; Lanctot, Matthew J.; Lao, Lang L.; Strait, Edward J.; Piovesan, Paolo; Martin, Piero

    2016-06-16

    Here, an explanation is provided for the disruptive instability in diverted tokamaks when the safety factor at the 95% poloidal flux surface, q95, is driven below 2.0. The instability is a resistive kink counterpart to the current-driven ideal mode that traditionally explained the corresponding disruption in limited cross-sections when qedge, the safety factor at the outermost closed flux surface, lies just below a rational value. Experimentally, external kink modes are observed in limiter configurations as the current in a tokamak is ramped up and qedge decreases through successive rational surfaces. For qedge < 2, the instability is always encountered and is highly disruptive. However, diverted plasmas, in which qedge is formally infinite in the magnetohydrodynamic (MHD) model, have presented a longstanding difficulty since the theory would predict stability, yet, the disruptive limit occurs in practice when q95, reaches 2. It is shown from numerical calculations that a resistive kink mode is linearly destabilized by the rapidly increasing resistivity at the plasma edge when q95 < 2, but qedge >> 2. The resistive kink behaves much like the ideal kink with predominantly kink or interchange parity and no real sign of a tearing component. However, the growth rates scale with a fractional power of the resistivity near the q = 2 surface. The results have a direct bearing on the conventional edge cutoff procedures used in most ideal MHD codes, as well as implications for ITER and for future reactor options.

  15. Self-organized stationary states of tokamaks

    NASA Astrophysics Data System (ADS)

    Jardin, Stephen

    2015-11-01

    We report here on a nonlinear mechanism that forms and maintains a self-organized stationary (sawtooth free) state in tokamaks. This process was discovered by way of extensive long-time simulations using the M3D-C1 3D extended MHD code in which new physics diagnostics have been added. It is well known that most high-performance modes of tokamak operation undergo ``sawtooth'' cycles, in which the peaking of the toroidal current density triggers a periodic core instability which redistributes the current density. However, certain modes of operation are known, such as the ``hybrid'' mode in DIII-D, ASDEX-U, JT-60U and JET, and the long-lived modes in NSTX and MAST, which do not experience this cycle of instability. Empirically, it is observed that these modes maintain a non-axisymmetric equilibrium which somehow limits the peaking of the toroidal current density. The physical mechanism responsible for this has not previously been understood, but is often referred to as ``flux-pumping,'' in which poloidal flux is redistributed in order to maintain q0 >1. In this talk, we show that in long-time simulations of inductively driven plasmas, a steady-state magnetic equilibrium may be obtained in which the condition q0 >1 is maintained by a dynamo driven by a stationary marginal core interchange mode. This interchange mode, unstable because of the pressure gradient in the ultra-low shear region in the center region, causes a (1,1) perturbation in both the electrostatic potential and the magnetic field, which nonlinearly cause a (0,0) component in the loop voltage that acts to sustain the configuration. This hybrid mode may be a preferred mode of operation for ITER. We present parameter scans that indicate when this sawtooth-free operation can be expected.

  16. Plasma diagnostics for the compact ignition tokamak

    SciTech Connect

    Medley, S.S.; Young, K.M.

    1988-06-01

    The primary mission of the Compact Ignition Tokamak (CIT) is to study the physics of alpha-particle heating in an ignited D-T plasma. A burn time of about 10 /tau//sub E/ is projected in a divertor configuration with baseline machine design parameters of R=2.10 m, 1=0.65 m, b=1.30 m, I/sub p/=11 MA, B/sub T/=10 T and 10-20 MW of auxiliary rf heating. Plasma temperatures and density are expected to reach T/sub e/(O) /approximately/20 keV, T/sub i/(O) /approximately/30 keV, and n/sub e/(O) /approximately/ 1 /times/ 10/sup 21/m/sup /minus/3/. The combined effects of restricted port access to the plasma, the presence of severe neutron and gamma radiation backgrounds, and the necessity for remote of in-cell components create challenging design problems for all of the conventional diagnostic associated with tokamak operations. In addition, new techniques must be developed to diagnose the evolution in space, time, and energy of the confined alpha distribution as well as potential plasma instabilities driven by collective alpha-particle effects. The design effort for CIT diagnostics is presently in the conceptual phase with activity being focused on the selection of a viable diagnostic set and the identification of essential research and development projects to support this process. A review of these design issues and other aspects impacting the selection of diagnostic techniques for the CIT experiment will be presented. 28 refs., 10 figs., 2 tabs.

  17. Dust Studies in DIII-D Tokamak

    SciTech Connect

    Rudakov, D L; West, W P; Groth, M; Yu, J H; Boedo, J A; Bray, B D; Brooks, N H; Fenstermacher, M E; Hollmann, E M; Hyatt, A W; Krasheninnikov, S I; Lasnier, C J; Moyer, R A; Pigarov, A Y; Smirnov, R; Solomon, W M; Wong, C C

    2008-04-15

    Studies of submicron dust using Mie scattering from Nd:YAG lasers and video data of micron to sub-millimeter sized dust on DIII-D tokamak have provided the first data of dust sources and transport during tokamak discharges. During normal operation on DIII-D dust observation rates are low, a few events per discharge or less. The net carbon content of the dust corresponds to a carbon atom density a few orders of magnitude below the core impurity density. Statistical analysis of Mie data collected over months of operation reveal correlation of increased dust rate with increased heating power and impulsive wall loading due to edge localized modes (ELMs) and disruptions. Generation of significant amounts of dust by disruptions is confirmed by the camera data. However, dust production by disruptions alone is insufficient to account for estimated in-vessel dust inventory in DIII-D. After an extended entry vent, thousands of dust particles are observed by cameras in the first 2-3 plasma discharges. Individual particles moving at velocities up to {approx}300 m/s, breakup of larger particles into pieces, and collisions of particles with walls are observed. After {approx}70 discharges, dust levels are reduced to a few events per discharge. In order to calibrate diagnostics and benchmark modeling, milligram amounts of micron-sized carbon dust have been injected into DIII-D discharges, leading to the core carbon density increase by a factor of 2-3. Following injection, dust trajectories in the divertor are mostly in the toroidal direction, consistent with the ion drag force. Dust from the injection is observed in the outboard midplane by a fast framing camera. The observed trajectories and velocities of the dust particles are in qualitative agreement with modeling by the 3D DustT code.

  18. Vertical compact torus injection into the STOR-M tokamak

    NASA Astrophysics Data System (ADS)

    Liu, Dazhi

    Central fuelling is a fundamental issue in the next generation tokamak-ITER (International Thermonuclear Experimental Reactor). It is essential for optimization of the bootstrap current which is proportional to the pressure gradient of trapped particles. The conventional fusion reactor fuelling techniques, such as gas puffing and cryogenic pellet injection, are considered inadequate to fulfill this goal due to premature ionization caused by high plasma temperature and density. Compact Torus (CT) injection is a promising fuelling technique for central fuelling a reactor-grade tokamak. An accelerated CT is expected to penetrate into the core region and deposit fuel there provided the CT kinetic energy density exceeds the magnetic energy density in a target plasma. This process is complicated and involves CT penetration into an external magnetic field, a CT stopping mechanism, magnetic reconnection, and excitation of plasma waves. CTs can be injected at different angles with respect to the tokamak toroidal magnetic field, either horizontally or vertically. Normally, CTs are injected radially in the mid-plane of a tokamak. In this configuration, CTs will undergo a decelerating force due to the gradient of the tokamak toroidal magnetic field. CTs will stop inside the tokamak chamber or bunce back depending on the relation between kinetic energy density of injected CTs and the tokamak toroidal magnetic field energy density. In the case of vertical injection, deeper penetration is expected due to the absence of the gradient of the tokamak toroidal field in that direction. Experimental investigations on vertical CT injection into a tokamak will be of great significance. The aim of this thesis is to experimentally investigate the feasibility of vertical CT injection into a tokamak and effects of CTs on tokamak plasma confinements. The Saskatchewan Torus-Modified (STOR-M) tokamak is currently the only tokamak equipped with a CT injector in the world. Vertical CT injection

  19. LONG PULSE ADVANCED TOKAMAK DISCHARGES IN THE DIII-D TOKAMAK

    SciTech Connect

    P.I. PETERSEN

    2002-06-01

    One of the main goals for the DIII-D research program is to establish an advanced tokamak plasma with high bootstrap current fraction that can be sustained in-principle steady-state. Substantial progress has been made in several areas during the last year. The resistive wall mode stabilization has been done with spinning plasmas in which the plasma pressure has been extended well above the no-wall beta limit. The 3/2 neoclassical tearing mode has been stabilized by the injection of ECH into the magnetic islands, which drives current to substitute the missing bootstrap current. In these experiments either the plasma was moved or the toroidal field was changed to overlap the ECCD resonance with the location of the NTMs. Effective disruption mitigation has been obtained by massive noble gas injection into shots where disruptions were deliberately triggered. The massive gas puff causes a fast and clean current quench with essentially all the plasma energy radiated fairly uniformly to the vessel walls. The run-away electrons that are normally seen accompanying disruptions are suppressed by the large density of electrons still bound on the impurity nuclei. Major elements required to establish integrated, long-pulse, advanced tokamak operations have been achieved in DIII-D: {beta}{sub T} = 4.2%, {beta}{sub p} = 2, f{sub BS} = 65%, and {beta}{sub N}H{sub 89} = 10 for 600 ms ({approx} 4{tau}{sub E}). The next challenge is to integrate the different elements, which will be the goal for the next five years when additional control will be available. Twelve resistive wall mode coils are scheduled to be installed in DIII-D during the summer of 2003. The future plans include upgrading the tokamak pulse length capability and increasing the ECH power, to control the current profile evolution.

  20. Magnetic Flux Reconstruction Methods for Shaped Tokamaks

    NASA Astrophysics Data System (ADS)

    Tsui, Chi-Wa.

    The use of a variational method permits the Grad -Shafranov (GS) equation to be solved by reducing the problem of solving the 2D non-linear partial differential equation to the problem of minimizing a function of several variables. This high speed algorithm approximately solves the GS equation given a pararmeterization of the plasma boundary and the current profile (p^' and FF^' functions). We treat the current profile parameters as unknowns. The goal is to reconstruct the internal magnetic flux surfaces of a tokamak plasma and the toroidal current density profile from the external magnetic measurements. This is a classic problem of inverse equilibrium determination. The current profile parameters can be evaluated by several different matching procedures. We found that the matching of magnetic flux and field at the probe locations using the Biot-Savart law and magnetic Green's function provides a robust method of magnetic reconstruction. The matching of poloidal magnetic field on the plasma surface provides a unique method of identifying the plasma current profile. However, the power of this method is greatly compromised by the experimental errors of the magnetic signals. The Casing Principle (60) provides a very fast way to evaluate the plasma contribution to the magnetic signals. It has the potential of being a fast matching method. We found that the performance of this method is hindered by the accuracy of the poloidal magnetic field computed from the equilibrium solver. A flux reconstruction package have been implemented which integrates a vacuum field solver using a filament model for the plasma, a multi-layer perceptron neural network as a interface, and the volume integration of plasma current density using Green's functions as a matching method for the current profile parameters. The flux reconstruction package is applied to compare with the ASEQ and EFIT data. The results are promising. Also, we found that some plasmas in the tokamak Alcator C-Mod lie

  1. Magnetic control of magnetohydrodynamic instabilities in tokamaks

    NASA Astrophysics Data System (ADS)

    Strait, E. J.

    2015-02-01

    Externally applied, non-axisymmetric magnetic fields form the basis of several relatively simple and direct methods to control magnetohydrodynamic (MHD) instabilities in a tokamak, and most present and planned tokamaks now include a set of non-axisymmetric control coils for application of fields with low toroidal mode numbers. Non-axisymmetric applied fields are routinely used to compensate small asymmetries ( δB /B ˜10-3 to 10-4 ) of the nominally axisymmetric field, which otherwise can lead to instabilities through braking of plasma rotation and through direct stimulus of tearing modes or kink modes. This compensation may be feedback-controlled, based on the magnetic response of the plasma to the external fields. Non-axisymmetric fields are used for direct magnetic stabilization of the resistive wall mode—a kink instability with a growth rate slow enough that feedback control is practical. Saturated magnetic islands are also manipulated directly with non-axisymmetric fields, in order to unlock them from the wall and spin them to aid stabilization, or position them for suppression by localized current drive. Several recent scientific advances form the foundation of these developments in the control of instabilities. Most fundamental is the understanding that stable kink modes play a crucial role in the coupling of non-axisymmetric fields to the plasma, determining which field configurations couple most strongly, how the coupling depends on plasma conditions, and whether external asymmetries are amplified by the plasma. A major advance for the physics of high-beta plasmas ( β = plasma pressure/magnetic field pressure) has been the understanding that drift-kinetic resonances can stabilize the resistive wall mode at pressures well above the ideal-MHD stability limit, but also that such discharges can be very sensitive to external asymmetries. The common physics of stable kink modes has brought significant unification to the topics of static error fields at low

  2. Magnetic control of magnetohydrodynamic instabilities in tokamaks

    SciTech Connect

    Strait, Edward J.

    2014-11-24

    Externally applied, non-axisymmetric magnetic fields form the basis of several relatively simple and direct methods to control magnetohydrodynamic (MHD) instabilities in a tokamak, and most present and planned tokamaks now include a set of non-axisymmetric control coils for application of fields with low toroidal mode numbers. Non-axisymmetric applied fields are routinely used to compensate small asymmetries ( δB/B ~ 10-3 to 10-4) of the nominally axisymmetric field, which otherwise can lead to instabilities through braking of plasma rotation and through direct stimulus of tearing modes or kink modes. This compensation may be feedback-controlled, based on the magnetic response of the plasma to the external fields. Non-axisymmetric fields are used for direct magnetic stabilization of the resistive wall mode — a kink instability with a growth rate slow enough that feedback control is practical. Saturated magnetic islands are also manipulated directly with non-axisymmetric fields, in order to unlock them from the wall and spin them to aid stabilization, or position them for suppression by localized current drive. Several recent scientific advances form the foundation of these developments in the control of instabilities. Most fundamental is the understanding that stable kink modes play a crucial role in the coupling of non-axisymmetric fields to the plasma, determining which field configurations couple most strongly, how the coupling depends on plasma conditions, and whether external asymmetries are amplified by the plasma. A major advance for the physics of high-beta plasmas ( β = plasma pressure/magnetic field pressure) has been the understanding that drift-kinetic resonances can stabilize the resistive wall mode at pressures well above the ideal-MHD stability limit, but also that such discharges can be very sensitive to external asymmetries. The common physics of stable kink modes has brought significant unification to the topics of static

  3. Magnetic control of magnetohydrodynamic instabilities in tokamaks

    DOE PAGES

    Strait, Edward J.

    2014-11-24

    Externally applied, non-axisymmetric magnetic fields form the basis of several relatively simple and direct methods to control magnetohydrodynamic (MHD) instabilities in a tokamak, and most present and planned tokamaks now include a set of non-axisymmetric control coils for application of fields with low toroidal mode numbers. Non-axisymmetric applied fields are routinely used to compensate small asymmetries ( δB/B ~ 10-3 to 10-4) of the nominally axisymmetric field, which otherwise can lead to instabilities through braking of plasma rotation and through direct stimulus of tearing modes or kink modes. This compensation may be feedback-controlled, based on the magnetic response of themore » plasma to the external fields. Non-axisymmetric fields are used for direct magnetic stabilization of the resistive wall mode — a kink instability with a growth rate slow enough that feedback control is practical. Saturated magnetic islands are also manipulated directly with non-axisymmetric fields, in order to unlock them from the wall and spin them to aid stabilization, or position them for suppression by localized current drive. Several recent scientific advances form the foundation of these developments in the control of instabilities. Most fundamental is the understanding that stable kink modes play a crucial role in the coupling of non-axisymmetric fields to the plasma, determining which field configurations couple most strongly, how the coupling depends on plasma conditions, and whether external asymmetries are amplified by the plasma. A major advance for the physics of high-beta plasmas ( β = plasma pressure/magnetic field pressure) has been the understanding that drift-kinetic resonances can stabilize the resistive wall mode at pressures well above the ideal-MHD stability limit, but also that such discharges can be very sensitive to external asymmetries. The common physics of stable kink modes has brought significant unification to the topics of static error fields

  4. Magnetic control of magnetohydrodynamic instabilities in tokamaks

    SciTech Connect

    Strait, E. J.

    2015-02-15

    Externally applied, non-axisymmetric magnetic fields form the basis of several relatively simple and direct methods to control magnetohydrodynamic (MHD) instabilities in a tokamak, and most present and planned tokamaks now include a set of non-axisymmetric control coils for application of fields with low toroidal mode numbers. Non-axisymmetric applied fields are routinely used to compensate small asymmetries (δB/B∼10{sup −3} to 10{sup −4}) of the nominally axisymmetric field, which otherwise can lead to instabilities through braking of plasma rotation and through direct stimulus of tearing modes or kink modes. This compensation may be feedback-controlled, based on the magnetic response of the plasma to the external fields. Non-axisymmetric fields are used for direct magnetic stabilization of the resistive wall mode—a kink instability with a growth rate slow enough that feedback control is practical. Saturated magnetic islands are also manipulated directly with non-axisymmetric fields, in order to unlock them from the wall and spin them to aid stabilization, or position them for suppression by localized current drive. Several recent scientific advances form the foundation of these developments in the control of instabilities. Most fundamental is the understanding that stable kink modes play a crucial role in the coupling of non-axisymmetric fields to the plasma, determining which field configurations couple most strongly, how the coupling depends on plasma conditions, and whether external asymmetries are amplified by the plasma. A major advance for the physics of high-beta plasmas (β = plasma pressure/magnetic field pressure) has been the understanding that drift-kinetic resonances can stabilize the resistive wall mode at pressures well above the ideal-MHD stability limit, but also that such discharges can be very sensitive to external asymmetries. The common physics of stable kink modes has brought significant unification to the topics of static error

  5. Basic Physics of Tokamak Transport Final Technical Report.

    SciTech Connect

    Sen, Amiya K.

    2014-05-12

    The goal of this grant has been to study the basic physics of various sources of anomalous transport in tokamaks. Anomalous transport in tokamaks continues to be one of the major problems in magnetic fusion research. As a tokamak is not a physics device by design, direct experimental observation and identification of the instabilities responsible for transport, as well as physics studies of the transport in tokamaks, have been difficult and of limited value. It is noted that direct experimental observation, identification and physics study of microinstabilities including ITG, ETG, and trapped electron/ion modes in tokamaks has been very difficult and nearly impossible. The primary reasons are co-existence of many instabilities, their broadband fluctuation spectra, lack of flexibility for parameter scans and absence of good local diagnostics. This has motivated us to study the suspected tokamak instabilities and their transport consequences in a simpler, steady state Columbia Linear Machine (CLM) with collisionless plasma and the flexibility of wide parameter variations. Earlier work as part of this grant was focused on both ITG turbulence, widely believed to be a primary source of ion thermal transport in tokamaks, and the effects of isotope scaling on transport levels. Prior work from our research team has produced and definitively identified both the slab and toroidal branches of this instability and determined the physics criteria for their existence. All the experimentally observed linear physics corroborate well with theoretical predictions. However, one of the large areas of research dealt with turbulent transport results that indicate some significant differences between our experimental results and most theoretical predictions. Latter years of this proposal were focused on anomalous electron transport with a special focus on ETG. There are several advanced tokamak scenarios with internal transport barriers (ITB), when the ion transport is reduced to

  6. Initial boronization of the DIII-D tokamak

    SciTech Connect

    Phillips, J.; Hodapp, T.; Holtrop, K.; Jackson, G.; Winter, J.

    1991-10-01

    A system has been installed to deposit a thin film of elemental boron to the walls of the D3-D tokamak, in order to reduce the influx of impurities during plasma discharges. Subsequently new regimes of substantially tokamak energy confinement were obtained. The deposition of the boron layer is achieved during a glow-discharge session using a helium-diborane age mixture and a film of {approx}100 nm is deposited. The boronization system includes special storage and handling precautions for the diborane, a delivery and metering system for the glow-discharge, modifications to the tokamak's residual gas analyzer system, and a dedicated system for handling and neutralizing the exhaust gas from the tokamak. Tokamak discharges with similar parameters before and after boronization are used to characterize the effects of the boron film. Nickel has been reduced by a factor of 30, while impurities such as oxygen and carbon are reduced fivefold. A system of pulsing the flow discharge has been developed in order to improve the uniformity of the film applied.

  7. Magnetic Start-up Inducement in NOVILLO Tokamak

    NASA Astrophysics Data System (ADS)

    Melendez-Lugo, Leandro; Chavez, Esteban; Barocio, Samuel R.; Flores, Angel; Cruz, Guillermo J.; Guadalupe Olayo, M.

    2000-10-01

    Most tokamak devices require one or more breakdown assistance systems, such as particles or ECRH radiation, in order to develop plasma discharges by increasing the probabilities of ionization. In smaller tokamaks filament preionization traditionally primes the start-up, reducing the required amounts of loop voltage and OHT flux consumption. Yet, the latter not only may result obtrusive to the operational access but also its incandescence contributes to raise the plasma impurity levels. A new vertical field profile, superimposed to the stray field component parallel to the equilibrium field, has been created in NOVILLO tokamak by means of two additional compensation poloidal coils. Such arrangement of the vertical field profiles, with an 1/R-dependence, has been found adequate to achieve the plasma breakdown without any preionization system. Furthermore, evidence has been gathered indicating that tokamak discharges achieved by vertical stray field modification instead of preionization allow to operate with higher prefill pressure and therefore to create denser plasmas at standard loop voltage levels. A technique like the one presented here may prove suitable to accomplish dependable discharges on large tokamaks while saving costs considerably. Likewise this technique is feasible to be applied successfully in general toroidal gas breakdown and arcing processes.

  8. Power supplies and quench protection for the Tokamak Physics Experiment

    SciTech Connect

    Neumeyer, C.L.

    1994-07-01

    The Tokamak Physics Experiment (TPX) is an advanced tokamak project aimed at the production of quasi-steady state plasmas with advanced shape, heating, and particle control. TPX is to be built at the Princeton Plasma Physics Laboratory (PPPL) using many of the facilities from the Tokamak Fusion Test Reactor (TFTR). First plasma is scheduled for the year 2000. TPX will be the first tokamak to utilize superconducting (SC) magnets in both the toroidal field (TF) and poloidal field (PF) systems. This is a new feature which requires not only a departure from the traditional tokamak power supply schemes but also that ultra-reliable quench protection devices be used to rapidly discharge the stored energy from the magnets in the event of a quench. This paper describes the plan and basis for the adaptation and augmentation of the PPPL/TFTR power system facilities to supply TPX. Following a description of the basic operational requirements, four major areas are addressed, namely the AC power system, the TF power supply, the PF power supply, and quench protection for the TF and PF systems.

  9. Power supplies and quench protection for the Tokamak Physics Experiment

    SciTech Connect

    Neumeyer, C.L.

    1994-11-01

    The Tokamak Physics Experiment (TPX) is an advanced tokamak project aimed at the production of quasi-steady state plasmas with advanced shape, heating, and particle control. TPX is to be built at the Princeton Plasma Physics Laboratory (PPPL) using many of the facilities from the Tokamak Fusion Test Reactor (TFTR). First plasma is scheduled for the year 2000. TPX will be the first tokamak to utilize superconducting (SC) magnets in both the toroidal field (TF) and poloidal field (PF) systems. This is a new feature which requires not only a departure from the traditional tokamak power supply schemes but also that ultra-reliable quench protection devices be used to rapidly discharge the stored energy from the magnets in the event of a quench. This paper describes the plan and basis for the adaptation and augmentation of the PPPL/TFTR power system facilities to supply TPX. Following a description of the basic operational requirements, four major areas are addressed, namely the AC power system, the TF power supply, the PF power supply, and quench protection for the TF and PF systems.

  10. Excess-density-driven snakes in tokamaks

    NASA Astrophysics Data System (ADS)

    Aydemir, A. Y.; Shaing, K. C.; Waelbroeck, F. L.

    2011-10-01

    ``Snakes'' refer to sinusoidal patterns observed on space-time plots of soft-X-ray signals in tokamak plasmas. They are generally attributed to persistent and localized density perturbations that form at a rational surface after pellet injection (Weller, JET 1987), and Parker, Alcator-C 1987), or impurity accumulation (Naujoks, ASDEX 1996, Delgado-Aparicio, C-Mod 2011). It is not clear whether all snake observations have a unique origin. A likely explanation is that material trapped inside an island driven by a temperature hole leads to the observed soft-X-ray signals (Wesson 1995). More recently, it has been suggested that they could be the result of saturated nonlinear internal kinks in low, or reversed-shear geometries (Cooper 2011). We have started an examination of some of these issues using ideas from neoclassical transport theory (Shaing 2007) in conjunction with various magnetohydrodynamic models. In a RMHD model, we demonstrated that excess-density-driven bootstrap current can stabilize a resistive m = 1 island at a small amplitude, leaving a radially and poloidally localized snake-like structure. Extension of this work to more sophisticated models that include diamagnetic effects, and possibly more realistic geometries, will be presented. This research was supported by the Office of Fusion Energy Science of the U.S. Department of Energy.

  11. Tearing mode analysis in tokamaks, revisited

    SciTech Connect

    Nishimura, Y.; Callen, J.D.; Hegna, C.C.

    1997-12-01

    A new {Delta}{prime} shooting code has been developed to investigate tokamak plasma tearing mode stability in a cylinder and large aspect ratio ({epsilon} {le} 0.25) toroidal geometries, neglecting toroidal mode coupling. A different computational algorithm is used (shooting out from the singular surface instead of into it) to resolve the strong singularities at the mode rational surface, particularly in the presence of finite pressure term. Numerical results compare favorably with Furth et al. results. The effects of finite pressure, which are shown to decrease {Delta}{prime}, are discussed. It is shown that the distortion of the flux surfaces by the Shafranov shift, which modifies the geometry metric element stabilizes the tearing mode significantly, even in a low {beta} regime before the toroidal magnetic curvature effects come into play. Double tearing modes in toroidal geometries are examined as well. Furthermore, m {ge} 2 tearing mode stability criteria are compared with three dimensional initial value MHD simulation by the FAR code.

  12. Neoclassical transport of impurtities in tokamak plasmas

    SciTech Connect

    Hirshman, S.P.; Sigmar, D.J.

    1981-05-01

    Tokamak plasmas are inherently comprised of multiple ion species. This is due to wall-bred impurities and, in future reactors, will result from fusion-born alpha particles. Relatively small concentrations of highly charged non-hydrogenic impurities can strongly influence plasma transport properties whenever n/sub I/e/sub I//sup 2//n/sub H/e/sup 2/ greater than or equal to (m/sub e//m/sub H/)/sup 1/2/. The determination of the complete neoclassical Onsager matrix for a toroidally confined multispecies plasma, which provides the linear relation between the surface averaged radial fluxes and the thermodynamic forces (i.e., gradients of density and temperature, and the parallel electric field), is reviewed. A closed set of one-dimensional moment equations is presented for the time evolution of thermodynamic and magnetic field quantities which results from collisional transport of the plasma and two dimensional motion of the magnetic flux surface geometry. The effects of neutral beam injection on the equilibrium and transport properties of a toroidal plasma are consistently included.

  13. Divertor design for the Tokamak Physics Experiment

    SciTech Connect

    Hill, D.N.; Braams, B.; Brooks, J.N.

    1994-05-01

    In this paper we discuss the present divertor design for the planned TPX tokamak, which will explore the physics and technology of steady-state (1000s pulses) heat and particle removal in high confinement (2--4{times} L-mode), high beta ({beta}{sub N} {ge} 3) divertor plasmas sustained by non-inductive current drive. The TPX device will operate in the double-null divertor configuration, with actively cooled graphite targets forming a deep (0.5 m) slot at the outer strike point. The peak heat flux on, the highly tilted (74{degrees} from normal) re-entrant (to recycle ions back toward the separatrix) will be in the range of 4--6 MW/m{sup 2} with 18 MW of neutral beams and RF heating power. The combination of active pumping and gas puffing (deuterium plus impurities), along with higher heating power (45 MW maximum) will allow testing of radiative divertor concepts at ITER-like power densities.

  14. Ionization balance in EBIT and tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Peacock, N. J.; Barnsley, R.; O'Mullane, M. G.; Tarbutt, M. R.; Crosby, D.; Silver, J. D.; Rainnie, J. A.

    2001-01-01

    The equilibrium state in tokamak core plasmas has been studied using the relative intensities of resonance x-ray lines, for example Lyα (H-like), "w" (He-like), and "q" (Li-like) from test ions such as Ar+15, Ar+16, and Ar+17. A full spatial analysis involves comparison of the line intensities with ion diffusion calculations, including relevant atomic rates. A zero-dimensional model using a global ion loss rate approximation has also been demonstrated by comparison with the data collected from a Johann configuration spectrometer with a charged coupled device (CCD) detector. Since the lines are nearly monoenergetic, their intensities are independent of the instrument sensitivity and are directly proportional to the ion abundances. This method has recently been applied to Ar in the Oxford electron beam ion trap (EBIT) with a beam energy in the range 3-10 keV. Taking into account the cross sections for monoenergetic electron collisions and polarization effects, model calculations agree with the observed line ratios at 4.1 keV beam energy. This work will be expanded to provide nomograms of ionization state versus line intensity ratios as a function of EBIT beam energy.

  15. Forced magnetic reconnection in Tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Cole, Andrew Joseph

    This dissertation addresses two related problems in the study of forced magnetic reconnection in Tokamak plasmas. First, a recent controversy concerning a model forced magnetic reconnection problem, the Taylor problem, has been resolved. The criticisms of Ishizawa and Tokuda [21] concerning the original analysis of Hahm and Kulsrud [17] are shown to be unwarranted, both analytically and numerically. Second, one possible reason for the discrepancy between recent experimental [29] and previous theoretical [13] scaling of the critical error-field penetration threshold with device parameters is addressed. The theory in question is entirely based on a single-fluid MHD (magnetohydrodynamical) treatment of the plasma. As is well-known, high temperature plasmas are far better modeled using the drift-MHD ordering.[18] Hence we develop a drift-MHD theory of error-field penetration. Although two new drift-MHD plasma response regimes are identified, the overall threshold scaling with device parameters is not altogether different from that predicted by single-fluid MHD.

  16. Quasicoherent modes on the COMPASS tokamak

    NASA Astrophysics Data System (ADS)

    Melnikov, A. V.; Markovic, T.; Eliseev, L. G.; Adámek, J.; Aftanas, M.; Bilkova, P.; Boehm, P.; Gryaznevich, M.; Imrisek, M.; Lysenko, S. E.; Medvedev, S. Y.; Panek, R.; Peterka, M.; Seidl, J.; Stefanikova, E.; Stockel, J.; Weinzettl, V.; the COMPASS Team

    2015-06-01

    Multiple quasicoherent electromagnetic modes with steady-state frequency and different nature and location were observed in the COMPASS tokamak (R = 0.56 m, = 0.2 m) at Bt = 1.14 T with Co-NBI (PNBI = 0.2-0.5 MW, Eb = 32 keV) at frequencies 5 kHz < f < 250 kHz. Modes were observed in both low and high confinement (L- and H-modes) plasmas. Lower frequency modes with f < 50 kHz were identified as low m tearing and kink MHD modes, while higher frequency modes with 50 kHz < f < 250 kHz were considered as having Alfvénic nature. Unexpectedly, such modes were only observed in the H-mode, both in neutral beam injector-assisted and Ohmic, so the mode driving force is not yet clear. Using the linear MHD code KINX, we initially identified the observed mode with a ballooning structure is as beta induced Alfvén eigenmode (BAE) with m, n < 5, while an antiballooning mode is initially identified as toroidal Alfvén eigenmode (TAE) with m, n < 9.

  17. Thermo-Oxidation of Tokamak Carbon Dust

    SciTech Connect

    J.W. Davis; B.W.N. Fitzpatrick; J.P. Sharpe; A.A. Haasz

    2008-04-01

    The oxidation of dust and flakes collected from the DIII-D tokamak, and various commercial dust specimens, has been measured at 350 ºC and 2.0 kPa O2 pressure. Following an initial small mass loss, most of the commercial dust specimens showed very little effect due to O2 exposure. Similarly, dust collected from underneath DIII-D tiles, which is thought to comprise largely Grafoil™ particulates, also showed little susceptibility to oxidation at this temperature. However, oxidation of the dust collected from tile surfaces has led to ~ 18% mass loss after 8 hours; thereafter, little change in mass was observed. This suggests that the surface dust includes some components of different composition and/or structure – possibly fragments of codeposited layers. The oxidation of codeposit flakes scraped form DIII-D upper divertor tiles showed an initial 25% loss in mass due to heating in vacuum, and the gradual loss of 30-38% mass during the subsequent 24 hours exposure to O2. This behavior is significantly different from that observed for the oxidation of thinner DIII-D codeposit specimens which were still adhered to tile surfaces, and this is thought to be related to the low deuterium content (D/C ~ 0.03 – 0.04) of the flakes.

  18. ELM experimental study on the EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Liu, Zixi; Gao, Xiang; Xu, Xueqiao; Li, Jiangang; EAST Team

    2013-10-01

    Atypical Type III ELM is observed on EAST tokamak. This type of ELM has MHD precursor and high collisionality at the edge, and also the threshold power is close to the scaling law. But the frequency of the ELM does not decrease with the injected power. Power threshold is lower with the molybdenum wall in double null (DN) on EAST. Considering the effects of the plasma surface (S) to the threshold power, Double Null has the lowest power threshold. Better energy confinement has been observed in DN compared to Single-null (SN) at same power loss. But with the same power loss, Upper Single Null (USN) with the grad-B drift pointing backwards the active X-point (favorable direction) on EAST has the lower energy confinement time than Lower Single Null (LSN). Low Hybrid Wave (LHW) can mitigate ELMs. The power deposition should be near the edge in the H-mode phase. Not only the LHW decreases the max gradient of the density in the pedestal region, but also brings the density oscillations. Low X-point configurations in Lower single null have a lower power threshold. The low X-point discharges on EAST is closer to the DN. Approaching to the DN configuration should be the reason of the lower power threshold caused by the lower X-point on EAST.

  19. Global Geodesic Acoustic Modes in Tokamak Plasmas

    NASA Astrophysics Data System (ADS)

    Sorokina, Ekaterina; Ilgisonis, Viktor; Lakhin, Vladimir; Smolyakov, Andrey; Khalzov, Ivan

    2010-11-01

    Global Geodesic Acoustic Modes (GGAM) in Tokamak Plasmas are investigated in the framework of reduced ideal MHD. The axisymmetric eigenvalue problem for perturbed pressure and electrostatic potential is formulated as a recurrent set of equations for poloidal Fourier harmonics. For uniform safety factor q and temperature profile with a maximum at radius r=r0!=0 the analytical solution of this eigenvalue problem is obtained for a truncated set of equations taking into account the m=0 and m=2 poloidal harmonics of potential and the m=1 harmonic of pressure. This solution exists in wide range of βq^2. It is shown both analytically and numerically that the higher harmonics of pressure (m=3) and electrostatic potential (m=4) reduce the range of the parameters, in which GGAM exist, due to the resonance with continuum spectrum. The domain of GGAM existence in the (βq^2, r0)-plane is represented. Higher poloidal harmonics (m>4) are shown to weakly affect the GAM spectrum and do not lead to the appearance of other global eigenmodes. The work is supported in part by grant RBRF 10-02-01302 and by Ministry of Education and Science of the RF, contract 1.5-508-008-045.

  20. Nonlinear fishbone dynamics in spherical tokamaks

    NASA Astrophysics Data System (ADS)

    Wang, Feng; Fu, G. Y.; Shen, Wei

    2017-01-01

    Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. The results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturates due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. A substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.

  1. Tokamak L/H mode transition

    SciTech Connect

    Tsui, K. H.; Navia, C. E.

    2012-01-15

    Through the non field-aligned rotational tokamak equilibrium of a divergence-free plasma flow with a pair of transformed plasma variables w-vector{sub *}=({mu}{rho}){sup 1/2}{nu}-vector and {mu}p{sub *}=({mu}p+w{sub *}{sup 2}/2)[K. H. Tsui, Phys. Plasmas 18, 072502 (2011)], a preliminary understanding of the L/H equilibrium transition is proposed through a feedback cycle, where the higher plasma flux due to external drives enters the rotational Grad-Shafranov equation through the velocity dependent poloidal plasma {beta} to generate the H equilibrium. This H rotational mode has the characteristics of higher normal electric field and plasma pressure. Coupled to the transport properties of E-vector x B-vector drift transport barrier leading to a higher plasma pressure, this makes the H mode a self-sustained equilibrium. The higher plasma {beta} then feeds back to the equilibrium and completes the feedback loop.

  2. Physics aspects of the Compact Ignition Tokamak

    SciTech Connect

    Post, D.; Bateman, G.; Houlberg, W.; Bromberg, L.; Cohn, D.; Colestock, P.; Hughes, M.; Ignat, D.; Izzo, R.; Jardin, S.

    1986-11-01

    The Compact Ignition Tokamak (CIT) is a proposed modest-size ignition experiment designed to study the physics of alpha-particle heating. The basic concept is to achieve ignition in a modest-size minimum cost experiment by using a high plasma density to achieve the condition of ntau/sub E/ approx. 2 x 10/sup 20/ sec m/sup -3/ required for ignition. The high density requires a high toroidal field (10 T). The high toroidal field allows a large plasma current (10 MA) which improves the energy confinement, and provides a high level of ohmic heating. The present CIT design also has a gigh degree of elongation (k approx. 1.8) to aid in producing the large plasma current. A double null poloidal divertor and a pellet injector are part of the design to provide impurity and particle control, improve the confinement, and provide flexibility for impurity and particle control, improve the confinement, and provide flexibility for improving the plasma profiles. Since auxiliary heating is expected to be necessary to achieve ignition, 10 to 20 MW of Ion Cyclotron Radio Frequency (ICRF) is to be provided.

  3. Zonal flows in tokamaks with anisotropic pressure

    SciTech Connect

    Ren, Haijun

    2014-04-15

    Zonal flows (ZFs) in a tokamak plasma with anisotropic pressure are investigated. The dynamics of perpendicular and parallel pressures are determined by the Chew-Goldberger-Low double equations and low-β condition is adopted, where β is the ratio of plasma pressure to the magnetic field pressure. The dispersion relation is analytically derived and illustrates two branches of ZFs. The low frequency zonal flow (LFZF) branch becomes unstable when χ, the ratio of the perpendicular pressure to the parallel one, is greater than a threshold value χ{sub c}, which is about 3.8. In the stable region, its frequency increases first and then decreases with increasing χ. For χ = 1, the frequency of LFZF agrees well with the experimental observation. For the instability, the growth rate of LFZF increases with χ. The geodesic acoustic mode branch is shown to be always stable with a frequency increasing with χ. The safety factor is shown to diminish the frequencies of both branches or the growth rate of LFZF.

  4. Fast bolometric measurements on the TCV tokamak

    NASA Astrophysics Data System (ADS)

    Furno, I.; Weisen, H.; Mlynar, J.; Pitts, R. A.; Llobet, X.; Marmillod, Ph.; Pochon, G. P.

    1999-12-01

    The design and first results are presented from a bolometric diagnostic with high temporal resolution recently installed on the TCV tokamak. The system consists of two pinhole cameras viewing the plasma from above and below at the same toroidal location. Each camera is equipped with an AXUV-16ELO linear array of 16 p-n junction photodiodes, characterized by a flat spectral sensitivity from ultraviolet to x-ray energies, a high temporal response (<0.5 μs), and insensitivity to low-energy neutral particles emitted by the plasma. This high temporal resolution allows the study of transient phenomena such as fast magnetohydrodynamic (MHD) activity hitherto inaccessible with standard bolometry. In the case of purely electromagnetic radiation, good agreement has been found when comparing results from the new diagnostic with those from a standard metal foil bolometer system. This comparison has also revealed that the contribution of neutrals to the foil bolometer measurements can be extremely important under certain operating conditions, precluding the application of tomographic techniques for reconstruction of the radiation distribution.

  5. Construction of the Lithium Tokamak Experiment (LTX)

    NASA Astrophysics Data System (ADS)

    Kozub, Thomas; Majeski, Richard; Kaita, Robert; Berzak, Laura; Lundberg, Daniel; Strickler, Trevor; Woolley, Robert; Zakharov, Leonid

    2008-11-01

    The Lithium Tokamak eXperiment (LTX)* will investigate the low recycling operating regime for magnetically confined plasmas using liquid lithium plasma facing surfaces. The engineering design and machine fabrication process will be presented. The most significant new feature of the LTX machine is the installation of a heated copper toroidal shell that will be operated at 300 C to 500 C. Its stainless steel plasma-facing liner will be internally coated with an evaporated layer of liquid lithium. The shell is comprised of four quadrants that have been fabricated in-house from explosively bonded stainless steel on copper to conform closely to the outer plasma flux surface. All internal components of the LTX machine have been designed and built to meet the simultaneous requirements for liquid lithium compatibility, high temperature operation, and electrical isolation. These requirements have led to unique design features, such as the method of supporting the shell quadrants, and construction of the new internal poloidal field coils. *Supported by US DOE contract #DE-AC02-76CH-03073

  6. Industry roles in the Tokamak Physics Experiment

    SciTech Connect

    Thomassen, K.I.

    1994-09-01

    The Tokamak Physics Experiment (TPX) is the first major fusion project opportunity in many years for US industry. Both the TPX management and the Department of Energy`s Office of Fusion Energy are committed to creating industry roles that are integrated throughout the project and that appropriately use the capabilities they offer. To address industry roles in TPX it is first appropriate to describe the collaborative national approach taken for this program. The Director of the Princeton Plasma Physics Laboratory (PPPL) was asked by DOE to set up this national team structure, and the current senior management positions and delegated responsibilities reflect that approach. While reporting lines and delegated roles are clear in the organization chart for TPX, one way to view, it, different from that of the individuals responsible upward through this management structure for various elements of the project, is through institutional responsibilities to the senior management team. In this view the management team relies on several national laboratories, each using industry contracts for major sub-systems and components, to execute the project. These responsibilities for design and for contracting are listed, showing that all major contracts will come through three national laboratories, forming teams for their responsible activities.

  7. Divertor design for the tokamak physics experiment

    NASA Astrophysics Data System (ADS)

    Hill, D. N.; Braams, B.; Brooks, J. N.; Ruzic, D. N.; Ulrickson, M.; Werley, K. A.; Campbell, R.; Goldston, R.; Kaiser, T.; Neilson, G. H.; Mioduszewski, P.; Rensink, M. E.; Rognlien, T. D.

    1995-04-01

    In this paper we discuss the divertor design for the planned TPX tokamak, which will explore the physics and technology of steady state (1000 s pulses) heat and particle removal in high confinement (up to 4 × L-mode), high beta (up to βN = 5) divertor plasmas sustained by non-inductive current drive. TPX will operate in the double-null divertor configuration, with actively cooled graphite targets forming a deep (0.57 m) slot at the outer strike point. The peak heat flux on the highly tilted (74° from normal) re-entrant divertor plate (tilted to recycle ions back toward the separatrix) will be in the range of 4-6 MW/m 2 with 17.5 MW of auxiliary heating power. The combination of pumping and gas puffing (D 2 plus impurities), along with higher heating power (45 MW maximum) will allow testing of radiative divertor concepts at ITER-like power densities.

  8. Divertor design for the Tokamak Physics Experiment

    NASA Astrophysics Data System (ADS)

    Hill, D. N.; Braams, B.; Brooks, J. N.; Ruzic, D. N.; Ulrickson, M.; Werley, K. A.; Campbell, R.; Goldston, R.; Kaiser, T.; Nellson, G. H.

    1994-05-01

    In this paper we discuss the present divertor design for the planned TPX tokamak, which will explore the physics and technology of steady-state (1000s pulses) heat and particle removal in high confinement (2-4 x L-mode), high beta (beta(sub N) greater than or equal to 3) divertor plasmas sustained by non-induct ive current drive. The TPX device will operate in the double-null divertor configuration, with actively cooled graphite targets forming a deep (0.5 m) slot at the outer strike point. The peak heat flux on, the highly tilted (74 deg) from normal) re-entrant (to recycle ions back toward the separatrix) will be in the range of 4-6 MW/sq m with 18 MW of neutral beams and RF heating power. The combination of active pumping and gas puffing (deuterium plus impurities), along with higher heating power (45 MW maximum) will allow testing of radiative divertor concepts at ITER-like power densities.

  9. Nonlinear fishbone dynamics in spherical tokamaks

    SciTech Connect

    Wang, Feng; Fu, G. Y.; Shen, Wei

    2016-11-22

    Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. Our results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturates due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. Furthermore, a substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Finally, our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.

  10. Nonlinear fishbone dynamics in spherical tokamaks

    SciTech Connect

    Wang, Feng; Fu, G.Y.; Shen, Wei

    2017-01-01

    Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. The results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturates due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. A substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.

  11. Nonlinear fishbone dynamics in spherical tokamaks

    DOE PAGES

    Wang, Feng; Fu, G. Y.; Shen, Wei

    2016-11-22

    Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. Our results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturatesmore » due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. Furthermore, a substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Finally, our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.« less

  12. Zonal flows in tokamaks with anisotropic pressure

    NASA Astrophysics Data System (ADS)

    Ren, Haijun

    2014-04-01

    Zonal flows (ZFs) in a tokamak plasma with anisotropic pressure are investigated. The dynamics of perpendicular and parallel pressures are determined by the Chew-Goldberger-Low double equations and low-β condition is adopted, where β is the ratio of plasma pressure to the magnetic field pressure. The dispersion relation is analytically derived and illustrates two branches of ZFs. The low frequency zonal flow (LFZF) branch becomes unstable when χ, the ratio of the perpendicular pressure to the parallel one, is greater than a threshold value χc, which is about 3.8. In the stable region, its frequency increases first and then decreases with increasing χ. For χ = 1, the frequency of LFZF agrees well with the experimental observation. For the instability, the growth rate of LFZF increases with χ. The geodesic acoustic mode branch is shown to be always stable with a frequency increasing with χ. The safety factor is shown to diminish the frequencies of both branches or the growth rate of LFZF.

  13. Sensitivity of predictive tokamak plasma transport simulations

    SciTech Connect

    Redd, A.J.; Kritz, A.H.; Bateman, G.; Kinsey, J.E.

    1997-06-01

    The sensitivity of our time-dependent simulations of low confinement (L-mode) discharges to variations in initial profiles and time-dependent boundary conditions has been explored. These time-dependent tokamak plasma simulations were performed using a theory-based Multi-mode transport model that includes ion temperature gradient (ITG) and trapped electron modes (TEM), kinetic and resistive ballooning modes and neoclassical modes. The density and temperature profiles predicted in our simulations of L-mode discharges are found to be robust, even with significant variations in the initial or boundary conditions. Although transport associated with a single mode can be strongly affected by local changes in plasma parameters resulting from changes in the boundary conditions, the total transport remains largely unchanged because of compensation by other transport modes. The sensitivity of the predicted temperature and density profiles to a variation in the Multi-mode model is also examined. When the Dominguez-Waltz theory of transport driven by ITG and TEM modes is replaced in the Multi-mode model by the Weiland description, we find that the predictions of the Weiland model more closely match the experimental data. {copyright} {ital 1997 American Institute of Physics.}

  14. Tokamak power system studies at ANL

    SciTech Connect

    Baker, C.C.; Ehst, D.A.; Brooks, J.N.; Evans, K. Jr.

    1986-06-01

    The following features, in particular, have been examined: (a) large aspect ratio (A approx. = 6), which may ease maintenance; (b) high beta (..beta.. greater than or equal to 0.20) without indentation, which brings the maximum toroidal field down to about 6 to 7 T; (c) low toroidal current (I approx. = 4MA), which reduces the cost of the current drive and equilibrium field system; and (d) steady state operation with current density control via fast and slow wave current drive. The key to high beta operation with low toroidal current lies in utilizing second stability regime equilibria with the required current distributions produced by an appropriate selection of wave driver frequencies and power spectra. The ray tracing and current drive calculation is self-consistent with the actual magnetic fields they produce in the plasma. The impurity control activities in TPSS have emphasized the self-pumping concept as applied to using the entire first wall or ''slot'' limiters. The blanket design effort has emphasized liquid metal and Flibe concepts. The reference concept is a liquid lithium/vanadium, self-cooled configuration. Overall, there exists a number of major design improvements which will substantially improve the attractiveness of tokamak reactors.

  15. A cross-tokamak neural network disruption predictor for the JET and ASDEX Upgrade tokamaks

    NASA Astrophysics Data System (ADS)

    Windsor, C. G.; Pautasso, G.; Tichmann, C.; Buttery, R. J.; Hender, T. C.; EFDA Contributors, JET; ASDEX Upgrade Team

    2005-05-01

    First results are reported on the prediction of disruptions in one tokamak, based on neural networks trained on another tokamak. The studies use data from the JET and ASDEX Upgrade devices, with a neural network trained on just seven normalized plasma parameters. In this way, a simple single layer perceptron network trained solely on JET correctly anticipated 67% of disruptions on ASDEX Upgrade in advance of 0.01 s before the disruption. The converse test led to a 69% success rate in advance of 0.04 s before the disruption in JET. Only one overall time scaling parameter is allowed between the devices, which can be introduced from theoretical arguments. Disruption prediction performance based on such networks trained and tested on the same device shows even higher success rates (JET, 86%; ASDEX Upgrade, 90%), despite the small number of inputs used and simplicity of the network. It is found that while performance for networks trained and tested on the same device can be improved with more complex networks and many adjustable weights, for cross-machine testing the best approach is a simple single layer perceptron. This offers the basis of a potentially useful technique for large future devices such as ITER, which with further development might help to reduce disruption frequency and minimize the need for a large disruption campaign to train disruption avoidance systems.

  16. Development of frequency modulation reflectometer for Korea Superconducting Tokamak Advanced Research tokamak

    NASA Astrophysics Data System (ADS)

    Seo, Seong-Heon; Park, Jinhyung; Wi, H. M.; Lee, W. R.; Kim, H. S.; Lee, T. G.; Kim, Y. S.; Kang, Jin-Seob; Bog, M. G.; Yokota, Y.; Mase, A.

    2013-08-01

    Frequency modulation reflectometer has been developed to measure the plasma density profile of the Korea Superconducting Tokamak Advanced Research tokamak. Three reflectometers are operating in extraordinary polarization mode in the frequency range of Q band (33.6-54 GHz), V band (48-72 GHz), and W band (72-108 GHz) to measure the density up to 7 × 1019 m-3 when the toroidal magnetic field is 2 T on axis. The antenna is installed inside of the vacuum vessel. A new vacuum window is developed by using 50 μm thick mica film and 0.1 mm thick gold gasket. The filter bank of low pass filter, notch filter, and Faraday isolator is used to reject the electron cyclotron heating high power at attenuation of 60 dB. The full frequency band is swept in 20 μs. The mixer output is directly digitized with sampling rate of 100 MSamples/s. The phase is obtained by using wavelet transform. The whole hardware and software system is described in detail and the measured density profile is presented as a result.

  17. Development of frequency modulation reflectometer for Korea Superconducting Tokamak Advanced Research tokamak

    SciTech Connect

    Seo, Seong-Heon; Wi, H. M.; Lee, W. R.; Kim, H. S.; Lee, T. G.; Kim, Y. S.; Park, Jinhyung; Kang, Jin-Seob; Bog, M. G.; Yokota, Y.; Mase, A.

    2013-08-15

    Frequency modulation reflectometer has been developed to measure the plasma density profile of the Korea Superconducting Tokamak Advanced Research tokamak. Three reflectometers are operating in extraordinary polarization mode in the frequency range of Q band (33.6–54 GHz), V band (48–72 GHz), and W band (72–108 GHz) to measure the density up to 7 × 10{sup 19} m{sup −3} when the toroidal magnetic field is 2 T on axis. The antenna is installed inside of the vacuum vessel. A new vacuum window is developed by using 50 μm thick mica film and 0.1 mm thick gold gasket. The filter bank of low pass filter, notch filter, and Faraday isolator is used to reject the electron cyclotron heating high power at attenuation of 60 dB. The full frequency band is swept in 20 μs. The mixer output is directly digitized with sampling rate of 100 MSamples/s. The phase is obtained by using wavelet transform. The whole hardware and software system is described in detail and the measured density profile is presented as a result.

  18. Development of frequency modulation reflectometer for Korea Superconducting Tokamak Advanced Research tokamak.

    PubMed

    Seo, Seong-Heon; Park, Jinhyung; Wi, H M; Lee, W R; Kim, H S; Lee, T G; Kim, Y S; Kang, Jin-Seob; Bog, M G; Yokota, Y; Mase, A

    2013-08-01

    Frequency modulation reflectometer has been developed to measure the plasma density profile of the Korea Superconducting Tokamak Advanced Research tokamak. Three reflectometers are operating in extraordinary polarization mode in the frequency range of Q band (33.6-54 GHz), V band (48-72 GHz), and W band (72-108 GHz) to measure the density up to 7 × 10(19) m(-3) when the toroidal magnetic field is 2 T on axis. The antenna is installed inside of the vacuum vessel. A new vacuum window is developed by using 50 μm thick mica film and 0.1 mm thick gold gasket. The filter bank of low pass filter, notch filter, and Faraday isolator is used to reject the electron cyclotron heating high power at attenuation of 60 dB. The full frequency band is swept in 20 μs. The mixer output is directly digitized with sampling rate of 100 MSamples/s. The phase is obtained by using wavelet transform. The whole hardware and software system is described in detail and the measured density profile is presented as a result.

  19. Prospects for pilot plants based on the tokamak, spherical tokamak and stellarator

    NASA Astrophysics Data System (ADS)

    Menard, J. E.; Bromberg, L.; Brown, T.; Burgess, T.; Dix, D.; El-Guebaly, L.; Gerrity, T.; Goldston, R. J.; Hawryluk, R. J.; Kastner, R.; Kessel, C.; Malang, S.; Minervini, J.; Neilson, G. H.; Neumeyer, C. L.; Prager, S.; Sawan, M.; Sheffield, J.; Sternlieb, A.; Waganer, L.; Whyte, D.; Zarnstorff, M.

    2011-10-01

    A potentially attractive next-step towards fusion commercialization is a pilot plant, i.e. a device ultimately capable of small net electricity production in as compact a facility as possible and in a configuration scalable to a full-size power plant. A key capability for a pilot-plant programme is the production of high neutron fluence enabling fusion nuclear science and technology (FNST) research. It is found that for physics and technology assumptions between those assumed for ITER and nth-of-a-kind fusion power plant, it is possible to provide FNST-relevant neutron wall loading in pilot devices. Thus, it may be possible to utilize a single facility to perform FNST research utilizing reactor-relevant plasma, blanket, coil and auxiliary systems and maintenance schemes while also targeting net electricity production. In this paper three configurations for a pilot plant are considered: the advanced tokamak, spherical tokamak and compact stellarator. A range of configuration issues is considered including: radial build and blanket design, magnet systems, maintenance schemes, tritium consumption and self-sufficiency, physics scenarios and a brief assessment of research needs for the configurations.

  20. A method for determining poloidal coil configurations for tokamak devices

    SciTech Connect

    Evans, K. Jr.

    1990-12-01

    This paper presents a method for obtaining the locations and currents of the poloidal coil systems for a tokamak, given an desirable magnetohydrodynamic equilibrium for the device. The method involves a simultaneous minimization of the match to the desired poloidal field and the stored energy in the coils, subject to the constraints necessary to achieve decoupling of the equilibrium and inductive-current-drive (ohmic-heating) systems and to achieve a given coupling of the current-drive system with the plasma. A compendium of mutual and self-inductance formulas as they apply to tokamak systems is presented, as well as examples of how the method has been used in the design of several tokamaks. Finally, a user manual for a computer code that implements this method is provided. 14 refs., 11 figs., 1 tab.

  1. Runaway electrons in a tokamak: A free-electron maser

    SciTech Connect

    Kurzan, B.; Steuer, K.

    1997-04-01

    In ohmic divertor plasma discharges of the ASDEX upgrade tokamak containing a small population of runaway electrons, fluctuating emission in the microwave region with a very narrow bandwidth is observed. The radiation can be explained by relativistic runaway electrons, which are captured in a ripple resonance of the tokamak and are thus made monoenergetic enough that they can undergo the collective instability of a free-electron maser. From the frequency of the maser, the energy of the runaway electrons, and from the linewidth and energy per radiation pulse, the particle density of the runaway electrons is determined locally. Observing this maser radiation is thus a different diagnostic for runaway electrons in tokamaks. {copyright} {ital 1997} {ital The American Physical Society}

  2. Driven magnetic reconnection in the COMPASS-C tokamak

    SciTech Connect

    Morris, A.W.; Carolan, P.G.; Fitzpatrick, R.; Hender, T.C.; Todd, T.N. , Abingdon, Oxon )

    1992-02-01

    The question of the influence of nonaxisymmetric field perturbations on tokamaks is investigated. Recent experiments in the COMPASS-C tokamak (in {ital Proceedings} {ital of} {ital the} 15{ital th} {ital Symposium} {ital on} {ital Fusion} {ital Technology}, Utrecht (North-Holland, Amsterdam, 1989), Vol. 1, p. 361) with externally applied helical fields reveal that magnetic islands do not appear until the applied field exceeds a certain value, when plasma rotation and confinement are affected. A new resistive magnetohydrodynamic model including plasma rotation now provides an explanation of this threshold, and is quantitatively consistent with experimental results in Ohmic plasmas. The results indicate the tolerable error fields in future tokamaks. The effects of perturbations with various poloidal and toroidal mode numbers have been studied.

  3. Texas Experimental Tokamak. Technical progress report, April 1990--April 1993

    SciTech Connect

    Wootton, A.J.

    1993-04-01

    This progress report covers the period from November 1, 1990 to April 30, 1993. During that period, TEXT was operated as a circular tokamak with a material limiter. It was devoted to the study of basic plasma physics, in particular to study of fluctuations, turbulence, and transport. The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics, specifically to conduct a research program under the following main headings: (1) to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks, in particular to understand the role of turbulence; (2) to study physics of the edge plasma, in particular the turbulence; (3) to study the physics or resonant magnetic fields (ergodic magnetic divertors, intra island pumping); and (4) to study the physics of electron cyclotron heating (ECRH). Results of studies in each of these areas are reported.

  4. Tokamak dust particle size and surface area measurement

    SciTech Connect

    Carmack, W.J.; Smolik, G.R.; Anderl, R.A.; Pawelko, R.J.; Hembree, P.B.

    1998-07-01

    The INEEL has analyzed a variety of dust samples from experimental tokamaks: General Atomics` DII-D, Massachusetts Institute of Technology`s Alcator CMOD, and Princeton`s TFTR. These dust samples were collected and analyzed because of the importance of dust to safety. The dust may contain tritium, be activated, be chemically toxic, and chemically reactive. The INEEL has carried out numerous characterization procedures on the samples yielding information useful both to tokamak designers and to safety researchers. Two different methods were used for particle characterization: optical microscopy (count based) and laser based volumetric diffraction (mass based). Surface area of the dust samples was measured using Brunauer, Emmett, and Teller, BET, a gas adsorption technique. The purpose of this paper is to present the correlation between the particle size measurements and the surface area measurements for tokamak dust.

  5. Prospects and status of low-aspect-ratio tokamaks

    SciTech Connect

    Peng, Y.K.M.

    1994-12-31

    The prospects for the low-aspect-ratio (A) tokamak to fulfill the requirements of viable fusion power plants are considered relative to the present status in data and modeling. Desirable physics and design features for an attractive Blanket Test Facility and power reactors are estimated for low-A tokamaks based on calculations improved with the latest data from small pioneering experiments. While these experiments have confirmed some of the recent predictions for low-A, they also identify the remaining issues that require verification before reliable projections can be made for these deuterium-tritium applications. The results show that the low-A regime of small size, modest field, and high current offers a path complementary to the standard and high A tokamaks in developing the full potential of fusion power.

  6. The engineering design of the Tokamak Physics Experiment (TPX)

    SciTech Connect

    Reiersen, W.T.

    1994-09-01

    The Tokamak Physics Experiment (TPX) is designed to develop the scientific basis for a compact and continuously operating tokamak fusion reactor. TPX has a long pulse (1000s) capability, can accommodate high divertor heat loads, has a flexible poloidal field (PF) system, and auxiliary heating and current drive systems that make it an ideal test bed for development of attractive reactor concepts. The design incorporates superconducting magnets in both the toroidal field (TF) and poloidal field (PF) systems. Long pulse deuterium operation will produce 6 {times} 10{sup 21} neutrons per year requiring remote maintenance of the in-vessel hardware. This paper provides an overview of the TPX design with the emphasis on developments in the tokamak design since the Conceptual Design Review (CDR) in March, 1993.

  7. Saturated internal instabilities in advanced-tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Hua, M.-D.; Chapman, I. T.; Pinches, S. D.; Hastie, R. J.; MAST Team

    2010-06-01

    "Advanced tokamak" (AT) scenarios were developed with the aim of reaching steady-state operation in future potential tokamak fusion power plants. AT scenarios exhibit non-monotonic to flat safety factor profiles (q, a measure of the magnetic field line pitch), with the minimum q (qmin) slightly above an integer value (qs). However, it has been predicted that these q profiles are unstable to ideal magnetohydrodynamic instabilities as qmin approaches qs. These ideal instabilities, observed and diagnosed as such for the first time in MAST plasmas with AT-like q profiles, have far-reaching consequences like confinement degradation, flattening of the toroidal core rotation or enhanced fast ion losses. These observations motivate the stability analysis of advanced-tokamak plasmas, with a view to provide guidance for stability thresholds in AT scenarios. Additionally, the measured rotation damping is compared to the self-consistently calculated predictions from neoclassical toroidal viscosity theory.

  8. Stochastic modeling of plasma mode forecasting in tokamak

    NASA Astrophysics Data System (ADS)

    Saadat, Sh.; Salem, M.; Ghoranneviss, M.; Khorshid, P.

    2012-04-01

    The structure of magnetohydrodynamic (MHD) modes has always been an interesting study in tokamaks. The mode number of tokamak plasma is the most important parameter, which plays a vital role in MHD instabilities. If it could be predicted, then the time of exerting external fields, such as feedback fields and Resonance Helical Field, could be obtained. Autoregressive Integrated Moving Average (ARIMA) and Seasonal Autoregressive Integrated Moving Average are useful models to predict stochastic processes. In this paper, we suggest using ARIMA model to forecast mode number. The ARIMA model shows correct mode number (m = 4) about 0.5 ms in IR-T1 tokamak and equations of Mirnov coil fluctuations are obtained. It is found that the recursive estimates of the ARIMA model parameters change as the plasma mode changes. A discriminator function has been proposed to determine plasma mode based on the recursive estimates of model parameters.

  9. Bootstrap currents in radio-frequency-driven tokamak equilibria

    SciTech Connect

    Hsiao, Ming-Yuan; Ehst, D.A.; Evans, K. Jr.

    1988-05-01

    Interest in the bootstrap current arising from neoclassical transport in tokamaks has increased recently in view of certain experimental observations. In this study, the bootstrap current is calculated for a number of rf current-driven tokamaks. Two-dimensional, self-consistent, steady-state tokamak MHD equilibria are obtained by including both the transport-driven bootstrap current and the externally driven rf current. The self-consistency is acomplished by iterating between two-dimensional MHD equilibrium calculations and the current calculations (including bootstrap and rf ray-tracing). Calculations for other reactor parameters of interest are also carried out. It is found that for reactor-grade plasmas, the bootstrap current contribution to the toroidal current is, in general, important. An approxiamte scaling law for GAMMA, based on parametric survey performed, is also obtained. 16 refs., 8 figs., 1 tab.

  10. Hybrid Method for Tokamak MHD Equilibrium Configuration Reconstruction

    NASA Astrophysics Data System (ADS)

    He, Hong-Da; Dong, Jia-Qi; Zhang, Jin-Hua; Jiang, Hai-Bin

    2007-02-01

    A hybrid method for tokamak MHD equilibrium configuration reconstruction is proposed and employed in the modified EFIT code. This method uses the free boundary tokamak equilibrium configuration reconstruction algorithm with one boundary point fixed. The results show that the position of the fixed point has explicit effects on the reconstructed divertor configurations. In particular, the separatrix of the reconstructed divertor configuration precisely passes the required position when the hybrid method is used in the reconstruction. The profiles of plasma parameters such as pressure and safety factor for reconstructed HL-2A tokamak configurations with the hybrid and the free boundary methods are compared. The possibility for applications of the method to swing the separatrix strike point on the divertor target plate is discussed.

  11. Ripple-induced energetic particle loss in tokamaks

    NASA Astrophysics Data System (ADS)

    White, R. B.; Goldston, R. J.; Redi, M. H.; Budny, R. V.

    1996-08-01

    The threshold for stochastic transport of high energy trapped particles in a tokamak due to toroidal field ripple is calculated by explicit construction of primary resonances, and a numerical examination of the route to chaos. Critical field ripple amplitude is determined for loss. The expression is given in magnetic coordinates and makes no assumptions regarding shape or up-down symmetry. An algorithm is developed including the effects of prompt axisymmetic orbit loss, ripple trapping, convective banana flow, and stochastic ripple loss, which gives accurate ripple loss predictions for representative Tokamak Fusion Test Reactor [R. Hawryluk, Plasma Phys. Controlled Fusion 33, 1509 (1991)] and International Thermonuclear Experimental Reactor [K. Tomabechi, Proceedings of the 12th International Conference on Plasma Physics and Controlled Nuclear Fusion Research (International Atomic Energy Agency, Vienna, 1989), Vol. 3, p. 214] equilibria. The algorithm is extended to include the effects of collisions and drag, allowing rapid estimation of alpha particle loss in tokamaks.

  12. Fusion Plasma Theory: Task 3, Auxiliary radiofrequency heating of tokamaks

    SciTech Connect

    Scharer, J.E.

    1992-01-01

    The research performed under this grant during the past year has been concentrated on the following several key tokamak ICRF (Ion Cyclotron Range of Frequencies) coupling, heating and current drive issues: Efficient coupling during the L- to H- mode transition by analysis and computer simulation of ICRF antennas; analysis of ICRF cavity-backed coil antenna coupling to plasma edge profiles including fast and ion Bernstein wave coupling for heating and current drive; benchmarking the codes to compare with current JET, D-IIID and ASDEX experimental results and predictions for advanced tokamaks such as BPX and SSAT (Steady-State Advanced Tokamak); ICRF full-wave field solutions, power conservation, heating analyses and minority ion current drive; and the effects of fusion alpha particle or ion tail populations on the ICRF absorption. Research progress, publications, and conference and workshop presentations are summarized in this report.

  13. The Dynamic Mutation Characteristics of Thermonuclear Reaction in Tokamak

    PubMed Central

    Li, Jing; Quan, Tingting; Zhang, Wei; Deng, Wei

    2014-01-01

    The stability and bifurcations of multiple limit cycles for the physical model of thermonuclear reaction in Tokamak are investigated in this paper. The one-dimensional Ginzburg-Landau type perturbed diffusion equations for the density of the plasma and the radial electric field near the plasma edge in Tokamak are established. First, the equations are transformed to the average equations with the method of multiple scales and the average equations turn to be a Z2-symmetric perturbed polynomial Hamiltonian system of degree 5. Then, with the bifurcations theory and method of detection function, the qualitative behavior of the unperturbed system and the number of the limit cycles of the perturbed system for certain groups of parameter are analyzed. At last, the stability of the limit cycles is studied and the physical meaning of Tokamak equations under these parameter groups is given. PMID:24892099

  14. The dynamic mutation characteristics of thermonuclear reaction in Tokamak.

    PubMed

    Li, Jing; Quan, Tingting; Zhang, Wei; Deng, Wei

    2014-01-01

    The stability and bifurcations of multiple limit cycles for the physical model of thermonuclear reaction in Tokamak are investigated in this paper. The one-dimensional Ginzburg-Landau type perturbed diffusion equations for the density of the plasma and the radial electric field near the plasma edge in Tokamak are established. First, the equations are transformed to the average equations with the method of multiple scales and the average equations turn to be a Z 2-symmetric perturbed polynomial Hamiltonian system of degree 5. Then, with the bifurcations theory and method of detection function, the qualitative behavior of the unperturbed system and the number of the limit cycles of the perturbed system for certain groups of parameter are analyzed. At last, the stability of the limit cycles is studied and the physical meaning of Tokamak equations under these parameter groups is given.

  15. Joint Experiments on the Tokamaks CASTOR and T-10

    SciTech Connect

    Oost, G. van; Peleman, P.; Gryaznevich, M.; Malaquias, A.; Mank, G.; Berta, M.; Brotankova, J.; Dejarnac, R.; Dufkova, E.; Duran, I.; Hron, M.; Sentkerestiova, J.; Stoeckel, J.; Weinzettl, V.; Zajac, J.; Budaev, V.

    2008-04-07

    Small tokamaks may significantly contribute to the better understanding of phenomena in a wide range of fields such as plasma confiement and energy transport; plasma stability in different magnetic configurations; plasma turbulence and its impact on local and global plasma parameters; processes at the plasma edge and plasma-wall interaction; scenarios of additional heating and non-inductive current drive; new methods of plasma profile and parameter control; development of novel plasma diagnostics; benchmarking of new numerical codes and so on. Furthermore, due to the compactness, flexibility, low operation costs and high skill of their personnel small tokamaks are very convenient to develop and test new materials and technologies. Small tokamaks are suitable and important for broad international cooperation, providing the necessary environment and manpower to conduct dedicated joint research programmes. In addition, the experimental work on small tokamaks is very appropriate for the education of students, scientific activities of post-graduate students and for the training of personnel for large tokamaks. The first Joint (Host Laboratory) Experiment (JE1) has been carried out in 2005 on the CASTOR tokamak at the IPP Prague, Czech Republic. It was jointly organized by the IPP-ASCR and KFKI HAC, Budapest, involved 20 scientists from 7 countries and was supported through the IAEA and the ICTP, Trieste. The objective of JE1 was to perform studies of plasma edge turbulence and plasma confinement. Following the success of JE1, JE2 has been performed on T-10 at RRC 'Kurchatov Institute' in Moscow; 30 scientists from 13 countries participated in this experiment. This experiment aimed to continue JE1 turbulence studies, now extending them to the plasma core. Results of JE1 and JE2 will be overviewed and compared.

  16. Fractal structure of films deposited in a tokamak

    SciTech Connect

    Budaev, V. P.; Khimchenko, L. N.

    2007-04-15

    The surface of amorphous films deposited in the T-10 tokamak was studied in a scanning tunnel microscope. The surface relief on a scale from 10 nm to 100 {mu}m showed a stochastic surface topography and revealed a hierarchy of grains. The observed variety of irregular structures of the films was studied within the framework of the concept of scale invariance using the methods of fractal geometry and statistical physics. The experimental probability density distribution functions of the surface height variations are close in shape to the Cauchy distribution. The stochastic surface topography of the films is characterized by a Hurst parameter of H = 0.68-0.85, which is evidence of a nontrivial self-similarity of the film structure. The fractal character and porous structure of deposited irregular films must be considered as an important issue related to the accumulation of tritium in the ITER project. The process of film growth on the surface of tokamak components exposed to plasma has been treated within the framework of the general concept of inhomogeneous surface growth. A strong turbulence of the edge plasma in tokamaks can give rise to fluctuations in the incident flux of particles, which leads to the growth of fractal films with grain dimensions ranging from nano-to micrometer scale. The shape of the surface of some films found in the T-10 tokamak has been interpreted using a model of diffusion-limited aggregation (DLA). The growth of films according to the discrete DLA model was simulated using statistics of fluctuations observed in a turbulent edge plasma of the T-10 tokamak. The modified DLA model reproduces well the main features of the surface of some films deposited in tokamaks.

  17. A self-consistent model of an isothermal tokamak

    NASA Astrophysics Data System (ADS)

    McNamara, Steven; Lilley, Matthew

    2014-10-01

    Continued progress in liquid lithium coating technologies have made the development of a beam driven tokamak with minimal edge recycling a feasibly possibility. Such devices are characterised by improved confinement due to their inherent stability and the suppression of thermal conduction. Particle and energy confinement become intrinsically linked and the plasma thermal energy content is governed by the injected beam. A self-consistent model of a purely beam fuelled isothermal tokamak is presented, including calculations of the density profile, bulk species temperature ratios and the fusion output. Stability considerations constrain the operating parameters and regions of stable operation are identified and their suitability to potential reactor applications discussed.

  18. DIII-D tokamak long range plan. Revision 3

    SciTech Connect

    1992-08-01

    The DIII-D Tokamak Long Range Plan for controlled thermonuclear magnetic fusion research will be carried out with broad national and international participation. The plan covers: (1) operation of the DIII-D tokamak to conduct research experiments to address needs of the US Magnetic Fusion Program; (2) facility modifications to allow these new experiments to be conducted; and (3) collaborations with other laboratories to integrate DIII-D research into the national and international fusion programs. The period covered by this plan is 1 November 19983 through 31 October 1998.

  19. Accessibility of second regions of stability in tokamaks

    SciTech Connect

    Manickam, J.

    1985-12-01

    Second regions of stability to the ideal ballooning modes have been shown to exist in large-aspect-ratio circular and small-aspect-ratio bean-shaped tokamaks. We report on the existence of these second stability regions in finite-aspect-ratio dee-shaped tokamaks. We also report on the discovery of a second-stable region with respect to the n = 1 external kink mode in a bean-shaped plasma. The role of the shear and current profile in determining these regions of parameter space are discussed. 13 refs., 6 figs.

  20. TIBER: Tokamak Ignition/Burn Experimental Research. Final design report

    SciTech Connect

    Henning, C.D.; Logan, B.G.; Barr, W.L.; Bulmer, R.H.; Doggett, J.N.; Johnson, B.M.; Lee, J.D.; Hoard, R.W.; Miller, J.R.; Slack, D.S.

    1985-11-01

    The Tokamak Ignition/Burn Experimental Research (TIBER) device is the smallest superconductivity tokamak designed to date. In the design plasma shaping is used to achieve a high plasma beta. Neutron shielding is minimized to achieve the desired small device size, but the superconducting magnets must be shielded sufficiently to reduce the neutron heat load and the gamma-ray dose to various components of the device. Specifications of the plasma-shaping coil, the shielding, coaling, requirements, and heating modes are given. 61 refs., 92 figs., 30 tabs. (WRF)

  1. Current Status and Future Technical Challenges for Tokamak Magnets

    SciTech Connect

    Martovetsky, N; Minervini, J; Okuno, K; Salpiero, E; Filatov, O

    2002-11-11

    Magnet technology for fusion in the last decade has been focusing mostly on the development of magnets for tokamaks--the most advanced fusion concept at the moment. The largest and the most complex tokamak under development is ITER. To demonstrate adequate design approaches to large magnets for ITER and to develop industrial capabilities, two large model coils and three insert coils, all using full-scale conductor, were built and tested by the international collaboration during 1994-2002. The status of the magnet technology and directions of future developments are discussed in this paper.

  2. What is the fate of runaway positrons in tokamaks?

    DOE PAGES

    Liu, Jian; Qin, Hong; Fisch, Nathaniel J.; ...

    2014-06-19

    In this study, massive runaway positrons are generated by runaway electrons in tokamaks. The fate of these positrons encodes valuable information about the runaway dynamics. The phase space dynamics of a runaway position is investigated using a Lagrangian that incorporates the tokamak geometry, loop voltage, radiation and collisional effects. It is found numerically that runaway positrons will drift out of the plasma to annihilate on the first wall, with an in-plasma annihilation possibility less than 0.1%. The dynamics of runaway positrons provides signatures that can be observed as diagnostic tools.

  3. Fusion-product transport in axisymmetric tokamaks: losses and thermalization

    SciTech Connect

    Hively, L.M.

    1980-01-01

    High-energy fusion-product losses from an axisymmetric tokamak plasma are studied. Prompt-escape loss fluxes (i.e. prior to slowing down) are calculated including the non-separable dependence of flux as a function of poloidal angle and local angle-of-incidence at the first wall. Fusion-product (fp) thermalization and heating are calculated assuming classical slowing down. The present analytical model describes fast ion orbits and their distribution function in realistic, high-..beta.., non-circular tokamak equilibria. First-orbit losses, trapping effects, and slowing-down drifts are also treated.

  4. The role of spherical torus in clarifying tokamak physics

    SciTech Connect

    Morris, A. W.; Peng, Yueng Kay Martin

    1999-01-01

    The spherical tokamak (ST) provides a unique environment in which to perform complementary and exacting tests of the tokamak physics required for a burning plasma experiment of any aspect ratio, while also having the potential for long-term fusion applications in its own right. New experiments are coming on-line in the UK (MAST), USA (NSTX, Pegasus), Russia (Globus-M), Brazil (ETE) and elsewhere, and the status of these devices will be reported, along with newly-analysed data from START. Those physics issues where the ST provides an opportunity to remove degeneracy in the databases or clarify one s understanding will be emphasized.

  5. Steady state self-induced current in tokamak

    SciTech Connect

    Gott, Yu. V.; Yurchenko, E. I.

    2009-11-15

    A model, which may make it possible to self-consistently calculate the self-driven current in tokamaks taking into account asymmetry and bootstrap currents, is presented. It is shown that the described self-driven current can provide steady-state tokamak operation without the seed current produced with the help of additional methods. The total self-consistent, self-driven current does not depend on magnetic field magnitude and is proportional to the square root from plasma pressure. The experimental data obtained in the National Spherical Torus Experiment are satisfactorily described by this model.

  6. Resistive demountable toroidal-field coils for tokamak reactors

    SciTech Connect

    Jassby, D.L.; Jacobsen, R.A.; Kalnavarns, J.; Masson, L.S.; Sekot, J.P.

    1981-07-01

    Readily demountable TF (toroidal-field) coils allow complete access to the internal components of a tokamak reactor for maintenance of replacement. The requirement of readily demountable joints dictates the use of water-cooled resistive coils, which have a host of decisive advantages over superconducting coils. Previous papers have shown that resistive TF coils for tokamak reactors can operate in the steady state with acceptable power dissipation (typically, 175 to 300 MW). This paper summarizes results of parametric studies of size optimization of rectangular TF coils and of a finite-element stress analysis, and examines several candidate methods of implementing demountable joints for rectangular coils constructed of plate segments.

  7. Adaptive grid finite element model of the tokamak scrapeoff layer

    SciTech Connect

    Kuprat, A.P.; Glasser, A.H.

    1995-07-01

    The authors discuss unstructured grids for application to transport in the tokamak edge SOL. They have developed a new metric with which to judge element elongation and resolution requirements. Using this method, the authors apply a standard moving finite element technique to advance the SOL equations while inserting/deleting dynamically nodes that violate an elongation criterion. In a tokamak plasma, this method achieves a more uniform accuracy, and results in highly stretched triangular finite elements, except near separatrix X-point where transport is more isotropic.

  8. Kinetic Energy Principle And Neoclassical Toroidal Torque In Tokamaks

    SciTech Connect

    Jong-Kyu Park

    2011-11-07

    It is shown that when tokamaks are perturbed the kinetic energy principle is closely related to the neoclassical toroidal torque by the action invariance of particles. Especially when tokamaks are perturbed from scalar pressure equilibria, the imaginary part of the potential energy in the kinetic energy principle is equivalent to the toroidal torque by the Neoclassical Toroidal Viscosity (NTV). A unified description therefore should be made for both physics. It is also shown in this case that the potential energy operator can be self-adjoint and thus the stability calculation can be simplified by minimizing the potential energy

  9. Internal Magnetic Configuration Measured by ECE Imaging on EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Xu, Ming; Wen, Yizhi; Xie, Jinlin; Yu, Changxuan; Gao, Bingxi; Xu, Xiaoyuan; Liu, Wandong; Hu, Liqun; Sun, Youwen; Qian, Jinping; Wan, Baonian

    2013-12-01

    ECE imaging (electron cyclotron emission imaging) is an important diagnostic which can give 2D imaging of temperature fluctuation in the core of tokamak. A method based on ECE imaging is introduced which can give the information of the position of magnetic axis and the structure of internal magnetic surface for EAST tokamak. The EFIT equilibrium reconstruction is not reliable due to the absence of important core diagnostic at the initial phase for EAST, so the information given by ECE imaging could help to improve the accuracy of EFIT equilibrium reconstruction.

  10. Resonant-cavity ICRF coupler for large tokamaks

    SciTech Connect

    Perkins, F.W.; Kluge, R.F.

    1983-04-01

    A new resonant-cavity ICRF coupler is proposed for large tokamaks. The design features a novel resonant cavity, an rf magnetic-field orientation that effectively radiates fast Alfven waves, matching to 40 ..cap omega.. transmission lines, and an electric-field orientation so that the strongest rf electric fields are orthogonal to the main toroidal magnetic field thereby benefitting from magnetic insulation. As a result, the power handling capability is excellent. For the case of the Big-Dee Doublet III tokamak, a single 35 cm x 50 cm coupler can launch 20 MW of fast Alfven waves. Extrapolation to fusion reactor parameters is straightforward.

  11. Rotational resonance of nonaxisymmetric magnetic braking in the KSTAR tokamak.

    PubMed

    Park, J-K; Jeon, Y M; Menard, J E; Ko, W H; Lee, S G; Bae, Y S; Joung, M; You, K-I; Lee, K-D; Logan, N; Kim, K; Ko, J S; Yoon, S W; Hahn, S H; Kim, J H; Kim, W C; Oh, Y-K; Kwak, J-G

    2013-08-30

    One of the important rotational resonances in nonaxisymmetric neoclassical transport has been experimentally validated in the KSTAR tokamak by applying highly nonresonant n=1 magnetic perturbations to rapidly rotating plasmas. These so-called bounce-harmonic resonances are expected to occur in the presence of magnetic braking perturbations when the toroidal rotation is fast enough to resonate with periodic parallel motions of trapped particles. The predicted and observed resonant peak along with the toroidal rotation implies that the toroidal rotation in tokamaks can be controlled naturally in favorable conditions to stability, using nonaxisymmetric magnetic perturbations.

  12. Kinetic energy principle and neoclassical toroidal torque in tokamaks

    SciTech Connect

    Park, Jong-Kyu

    2011-11-15

    It is shown that when tokamaks are perturbed, the kinetic energy principle is closely related to the neoclassical toroidal torque by the action invariance of particles. Especially when tokamaks are perturbed from scalar pressure equilibria, the imaginary part of the potential energy in the kinetic energy principle is equivalent to the toroidal torque by the neoclassical toroidal viscosity. A unified description therefore should be made for both physics. It is also shown in this case that the potential energy operator can be self-adjoint and thus the stability calculation can be simplified by minimizing the potential energy.

  13. Resistive wall mode stabilization by plasma rotation in advanced tokamaks

    NASA Astrophysics Data System (ADS)

    Eriksson, G.

    1996-03-01

    By combining previous results of Betti and Freidberg [Phys. Rev. Lett. 74, 2949 (1995)] and Eriksson [Phys. Plasmas 2, 3095 (1995)], a fully analytical description is obtained for the stabilizing effect of toroidal plasma rotation in a large aspect ratio tokamak surrounded by a resistive wall. As in advanced tokamak configurations with a large fraction of bootstrap current, it is assumed that the current gradient near the plasma edge is large. This assumption enables an analytical analysis of external kink modes with low poloidal mode numbers. An expression is obtained, showing explicitly how the window of stable wall distances depends on the current profile.

  14. Electron cyclotron current drive efficiency in general tokamak geometry

    SciTech Connect

    Lin-Liu, Y. R.; Chan, V. S.; Prater, R.

    2003-01-01

    Green's-function techniques are used to calculate electron cyclotron current drive (ECCD) efficiency in general tokamak geometry in the low-collisionality regime. Fully relativistic electron dynamics is employed in the theoretical formulation. The high-velocity collision model is used to model Coulomb collisions and a simplified quasi-linear rf diffusion operator describes wave-particle interactions. The approximate analytic solutions which are benchmarked with a widely used ECCD model, facilitate time-dependent simulations of tokamak operational scenarios using the non-inductive current drive of electron cyclotron waves.

  15. Magnetic flux reconstruction methods for shaped tokamaks

    NASA Astrophysics Data System (ADS)

    Tsui, Chi-Wa

    1993-12-01

    The use of a variational method permits the Grad-Shafranov (GS) equation to be solved by reducing the problem of solving the two dimensional nonlinear partial differential equation to the problem of minimizing a function of several variables. This high speed algorithm approximately solves the GS equation given a parameterization of the plasma boundary and the current profile (p' and FF' functions). The current profile parameters are treated as unknowns. The goal is to reconstruct the internal magnetic flux surfaces of a tokamak plasma and the toroidal current density profile from the external magnetic measurements. This is a classic problem of inverse equilibrium determination. The current profile parameters can be evaluated by several different matching procedures. Matching of magnetic flux and field at the probe locations using the Biot-Savart law and magnetic Green's function provides a robust method of magnetic reconstruction. The matching of poloidal magnetic field on the plasma surface provides a unique method of identifying the plasma current profile. However, the power of this method is greatly compromised by the experimental errors of the magnetic signals. The Casing principle provides a very fast way to evaluate the plasma contribution to the magnetic signals. It has the potential of being a fast matching method. The performance of this method is hindered by the accuracy of the poloidal magnetic field computed from the equilibrium solver. A flux reconstruction package has been implemented which integrates a vacuum field solver using a filament model for the plasma, a multilayer perception neural network as an interface, and the volume integration of plasma current density using Green's functions as a matching method for the current profile parameters. The flux reconstruction package is applied to compare with the ASEQ and EFIT data.

  16. Magnetic flux reconstruction methods for shaped tokamaks

    SciTech Connect

    Tsui, Chi-Wa

    1993-12-01

    The use of a variational method permits the Grad-Shafranov (GS) equation to be solved by reducing the problem of solving the 2D non-linear partial differential equation to the problem of minimizing a function of several variables. This high speed algorithm approximately solves the GS equation given a parameterization of the plasma boundary and the current profile (p` and FF` functions). The author treats the current profile parameters as unknowns. The goal is to reconstruct the internal magnetic flux surfaces of a tokamak plasma and the toroidal current density profile from the external magnetic measurements. This is a classic problem of inverse equilibrium determination. The current profile parameters can be evaluated by several different matching procedures. Matching of magnetic flux and field at the probe locations using the Biot-Savart law and magnetic Green`s function provides a robust method of magnetic reconstruction. The matching of poloidal magnetic field on the plasma surface provides a unique method of identifying the plasma current profile. However, the power of this method is greatly compromised by the experimental errors of the magnetic signals. The Casing Principle provides a very fast way to evaluate the plasma contribution to the magnetic signals. It has the potential of being a fast matching method. The performance of this method is hindered by the accuracy of the poloidal magnetic field computed from the equilibrium solver. A flux reconstruction package has been implemented which integrates a vacuum field solver using a filament model for the plasma, a multi-layer perception neural network as an interface, and the volume integration of plasma current density using Green`s functions as a matching method for the current profile parameters. The flux reconstruction package is applied to compare with the ASEQ and EFIT data. The results are promising.

  17. Analysis of images from videocameras in the Frascati Tokamak Upgrade tokamak

    SciTech Connect

    De Angelis, R.; Migliori, S.; Borioni, S.; Bracco, G.; Pierattini, S.; Perozziello, A.

    2004-10-01

    The plasma edge interaction in FTU tokamak is monitored by wide angle videocameras. Data are acquired as movies or single frames at a rate of 50 frames/s. The images show interesting features of the plasma such as the presence of Marfes or runaways and give useful information on the status of large parts of the vacuum vessel and toroidal limiter. Due to the large number of data available visual inspection of the movies is often insufficient to correlate the images to the experimental findings. This article illustrates a number of applications developed in order to correlate the images with plasma signals and to search the image database for specific features relevant to the discharge.

  18. HPGe well-type detectors for neutron activation measurements on the Frascati Tokamak Upgrade tokamak

    SciTech Connect

    Bertalot, L.; Damiani, M.; Esposito, B.; Lagamba, L.; Podda, S.; Batistoni, P.; De Felice, P.; Biagini, R.

    1997-01-01

    We describe an improvement of the neutron activation system in operation on the Frascati Tokamak Upgrade (FTU) tokamak for the measurement of the total neutron yield. A HPGe well-type detector (200 cm{sup 3} active volume) is used to detect the photoemission from neutron activated samples ({sup 115m}In336.2 keV {gamma} rays from DD neutrons on indium for FTU). Due to their high geometrical efficiency, HPGe well-type detectors are particularly suited to the FTU low-level activity measurements. A particular effort has been devoted to the calibration of the measuring system. In particular, a multi-{gamma} calibration source (59{endash}1332 keV energy range) with a density of 7.31 g/cm{sup 3} consisting of a stack of indium foils has been prepared. This assures that the shape and volume of the calibration source are the same as those of the samples used in the actual measurements. The full-energy-peak efficiency at the {sup 115m}In336.2 keV line is 0.197 with an overall uncertainty of 2{percent} (1{sigma}). For a better characterization of the detector response as a function of the sample density, a further calibration source with the same geometry has been prepared in a gel aqueous solution (density {approximately}1 g/cm{sup 3}). The calibration curves for the well-type detector at the two different density values are compared. {copyright} {ital 1997 American Institute of Physics.}

  19. Dynamic diagnostics of the error fields in tokamaks

    NASA Astrophysics Data System (ADS)

    Pustovitov, V. D.

    2007-07-01

    The error field diagnostics based on magnetic measurements outside the plasma is discussed. The analysed methods rely on measuring the plasma dynamic response to the finite-amplitude external magnetic perturbations, which are the error fields and the pre-programmed probing pulses. Such pulses can be created by the coils designed for static error field correction and for stabilization of the resistive wall modes, the technique developed and applied in several tokamaks, including DIII-D and JET. Here analysis is based on the theory predictions for the resonant field amplification (RFA). To achieve the desired level of the error field correction in tokamaks, the diagnostics must be sensitive to signals of several Gauss. Therefore, part of the measurements should be performed near the plasma stability boundary, where the RFA effect is stronger. While the proximity to the marginal stability is important, the absolute values of plasma parameters are not. This means that the necessary measurements can be done in the diagnostic discharges with parameters below the nominal operating regimes, with the stability boundary intentionally lowered. The estimates for ITER are presented. The discussed diagnostics can be tested in dedicated experiments in existing tokamaks. The diagnostics can be considered as an extension of the 'active MHD spectroscopy' used recently in the DIII-D tokamak and the EXTRAP T2R reversed field pinch.

  20. Electron-cyclotron-heating experiments in tokamaks and stellarators

    SciTech Connect

    England, A.C.

    1983-01-01

    This paper reviews the application of high-frequency microwave radiation to plasma heating near the electron-cyclotron frequency in tokamaks and stellarators. Successful plasma heating by microwave power has been demonstrated in numerous experiments. Predicted future technological developments and current theoretical understanding suggest that a vigorous program in plasma heating will continue to yield promising results.

  1. Gamma ray imager on the DIII-D tokamak

    SciTech Connect

    Pace, D. C. Taussig, D.; Eidietis, N. W.; Van Zeeland, M. A.; Watkins, M.; Cooper, C. M.; Hollmann, E. M.; Riso, V.

    2016-04-15

    A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1–60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. First measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.

  2. Gamma ray imager on the DIII-D tokamak

    SciTech Connect

    Pace, D. C.; Cooper, C. M.; Taussig, D.; Eidietis, N. W.; Hollmann, E. M.; Riso, V.; Van Zeeland, M. A.; Watkins, M.

    2016-04-13

    A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1- 60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. In conclusion, first measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.

  3. Gamma ray imager on the DIII-D tokamak

    DOE PAGES

    Pace, D. C.; Cooper, C. M.; Taussig, D.; ...

    2016-04-13

    A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electronsmore » in the energy range of 1- 60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. In conclusion, first measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.« less

  4. Plasma Physics Lab and the Tokamak Fusion Test Reactor, 1989

    ScienceCinema

    None

    2016-07-12

    From the Princeton University Archives: Promotional video about the Plasma Physics Lab and the new Tokamak Fusion Test Reactor (TFTR), with footage of the interior, machines, and scientists at work. This film is discussed in the audiovisual blog of the Seeley G. Mudd Manuscript Library, which holds the archives of Princeton University.

  5. First neutron spectrometry measurement at the HL-2A Tokamak

    NASA Astrophysics Data System (ADS)

    Yuan, Xi; Zhang, Xing; Xie, Xu-Fei; Chen, Zhong-Jing; Peng, Xing-Yu; Fan, Tie-Shuan; Chen, Jin-Xiang; Li, Xiang-Qing; Yuan, Guo-Liang; Yang, Qing-Wei; Yang, Jin-Wei

    2013-12-01

    A compact neutron spectrometer based on the liquid scintillator is presented for neutron energy spectrum measurements at the HL-2A Tokamak. The spectrometer was well characterized and a fast digital pulse shape discrimination software was developed using the charge comparison method. A digitizer data acquisition system with a maximum frequency of 1 MHz can work under an environment with a high count rate at HL-2A Tokamak. Specific radiation and magnetic shielding for the spectrometer were designed for the neutron spectrum measurement at the HL-2A Tokamak. For pulse height spectrum analysis, dedicated numerical simulation utilizing NUBEAM combined with GENESIS was performed to obtain the neutron energy spectrum. Subsequently, the transportation process from the plasma to the detector was evaluated with Monte Carlo calculations. The distorted neutron energy spectrum was folded with the response matrix of the liquid scintillation spectrometer, and good consistency was found between the simulated and measured pulse height spectra. This neutron spectrometer based on a digital acquisition system could be well adopted for the investigation of the auxiliary heating behavior and the fast-ion related phenomenon on different tokamak devices.

  6. Modelling multi-ion plasma gun simulations of Tokamak disruptions

    SciTech Connect

    Ehst, D.A.

    1995-08-01

    The effect of impurity ions in plasma gun ablation tests of various targets is considered. Inclusion of reasonable amounts of impurity ({approximately}10%) is adequate to explain observed energy transmission and erosion measurements. The gun tests and the computer code calculations are relevant to the parameter range expected for major disruptions on large tokamaks.

  7. Development in Diagnostics Application to Control Advanced Tokamak Plasma

    SciTech Connect

    Koide, Y.

    2008-03-12

    For continuous operation expected in DEMO, all the plasma current must be non-inductively driven, with self-generated neoclassical bootstrap current being maximized. The control of such steady state high performance tokamak plasma (so-called 'Advanced Tokamak Plasma') is a challenge because of the strong coupling between the current density, the pressure profile and MHD stability. In considering diagnostic needs for the advanced tokamak research, diagnostics for MHD are the most fundamental, since discharges which violate the MHD stability criteria either disrupt or have significantly reduced confinement. This report deals with the development in diagnostic application to control advanced tokamak plasma, with emphasized on recent progress in active feedback control of the current profile and the pressure profile under DEMO-relevant high bootstrap-current fraction. In addition, issues in application of the present-day actuators and diagnostics for the advanced control to DEMO will be briefly addressed, where port space for the advanced control may be limited so as to keep sufficient tritium breeding ratio (TBR)

  8. Sensitivity of transient synchrotron radiation to tokamak plasma parameters

    SciTech Connect

    Fisch, N.J.; Kritz, A.H.

    1988-12-01

    Synchrotron radiation from a hot plasma can inform on certain plasma parameters. The dependence on plasma parameters is particularly sensitive for the transient radiation response to a brief, deliberate, perturbation of hot plasma electrons. We investigate how such a radiation response can be used to diagnose a variety of plasma parameters in a tokamak. 18 refs., 13 figs.

  9. Sub-Alfvénic reduced magnetohydrodynamic equations for tokamaks

    NASA Astrophysics Data System (ADS)

    Sengupta, W.; Hassam, A. B.; Antonsen, T. M.

    2017-06-01

    A reduced set of magnetohydrodynamic (MHD) equations is derived, applicable to large aspect ratio tokamaks and relevant for dynamics that is sub-Alfvénic with respect to ideal ballooning modes. This ordering optimally allows sound waves, Mercier modes, drift modes, geodesic-acoustic modes (GAM), zonal flows and shear Alfvén waves. Wavelengths long compared to the gyroradius but comparable to the minor radius of a typical tokamak are considered. With the inclusion of resistivity, tearing modes, resistive ballooning modes, Pfirsch-Schluter cells and the Stringer spin-up are also included. A major advantage is that the resulting system is two-dimensional in space, and the system incorporates self-consistent and dynamic Shafranov shifts. A limitation is that the system is valid only in radial domains where the tokamak safety factor, , is close to rational. In the tokamak core, the system is well suited to study the sawtooth discharge in the presence of Mercier modes. The systematic ordering scheme and methodology developed are versatile enough to reduce the more general collisional two-fluid equations or possibly the Vlasov-Maxwell system in the MHD ordering.

  10. INTOR: a first-generation tokamak experimental reactor

    SciTech Connect

    Stacey, Jr, W M; Gilleland, J R; Kulcinski, G L; Rutherford, P H

    1980-02-01

    An intensive, year-long, international evaluation of the next major tokamak beyond the generation of large experiments currently under construction was carried out during 1979. This evaluation consisted of the definition of objectives, an assessment of the physics and technology base and R and D needs and the identification of a set of parameters that physically characterize the machine.

  11. TPX diagnostics for tokamak operation, plasma control and machine protection

    SciTech Connect

    Edmonds, P.H.; Medley, S.S.; Young, K.M.

    1995-08-01

    The diagnostics for TPX are at an early design phase, with emphasis on the diagnostic access interface with the major tokamak components. Account has to be taken of the very severe environment for diagnostic components located inside the vacuum vessel. The placement of subcontracts for the design and fabrication of the diagnostic systems is in process.

  12. Superconducting magnet protection system for the tokamak physics experiment

    NASA Astrophysics Data System (ADS)

    Schultz, Joel H.; Chaniotakis, E.; Pillsbury, R. D., Jr.; Wang, P. W.; Citrolo, J.; Neumeyer, C.; Chaplin, M.; Hassenzahl, W. V.

    1994-07-01

    The TPX tokamak must protect 30 superconducting magnets during a complex, pulsed physics scenario. 2.0 MA plasma vertical disruptions will occur at unpredictable intervals. These should not cause quench, but will be difficult to distinguish from quench. A redundant, multiple signal protection system combines conventional voltage taps with signals from cowound conductors, pressure and flow sensors.

  13. Superconducting magnet protection system for the Tokamak Physics Experiment

    SciTech Connect

    Schultz, J.H.; Chaniotakis, E.; Pillsbury, R.D. Jr.; Wang, P.W.; Citrolo, J.; Neumeyer, C.; Chaplin, M.; Hassenzahl, W.V.

    1994-07-01

    The TPX tokamak must protect 30 superconducting magnets during a complex, pulsed physics scenario. 2.0 MA plasma vertical disruptions will occur at unpredictable intervals. These should not cause quench, but will be difficult to distinguish from quench. A redundant, multiple signal protection system combines conventional voltage taps with signals from cowound conductors, pressure and flow sensors.

  14. ECRH: A Tool To Control Disruptions In Tokamaks

    NASA Astrophysics Data System (ADS)

    Granucci, G.; Esposito, B.; Maraschek, M.; Nowak, S.; Martin-Solis, J. R.; Bin, W.; Botrugno, A.; Gabellieri, L.; Lazzaro, E.; Pautasso, G.; Romano, A.; Smeulders, P.; Stober, J.; Treutterer, W.; Tudisco, O.; Urso, L.; Volpe, F.; Zohm, H.

    2009-11-01

    ECRH is suited for MHD control in tokamaks and this is well known since the several pioneering experiments investigating MHD stabilization either for confinement increase or for avoidance of disruptions originated by such instabilities. The first of these objectives has been strongly pursued up to the design of a system for neoclassical tearing mode stabilization in ITER based on the use of ECRH/ECCD, whereas the second one has been mostly neglected, despite the initial good results obtained on small tokamaks (RTP, T-10 and JFT-2M) in which ECRH was used to avoid disruptions originated by MHD limits or strong gas puffing. In the last years ECRH has been used again for disruption control on the Frascati Tokamak Upgrade (FTU) and on ASDEX Upgrade (AUG). Disruptions have been obtained by density limit and by impurity injection and an accurate power deposition scan has been performed. Full avoidance has been demonstrated on both tokamaks, confirming the need of a precise power localization and of the existence of a power threshold. The results of past experiments will be reviewed on the basis of the results recently obtained in FTU and AUG, together with a preliminary analysis of the applicability of this disruption control technique to ITER, by extrapolation of the power thresholds found in AUG and FTU.

  15. Local kinetic analysis of the ballooning mode in tokamaks

    NASA Astrophysics Data System (ADS)

    Hirose, Akira

    1990-07-01

    The problem of ballooning marginal stability in tokamaks, in both the incompressible and compressible limits, is examined in terms of a local kinetic dispersion relation by incorporating all possible kinetic resonances of both electrons and ions. In particular, the ion Landau resonance, which has been ignored in previous kinetic theories, is retained. A low-beta, collisionless tokamak discharge with shifted circular magnetic surfaces is assumed; for simplicity, particle trapping is ignored. The analysis indicates that the stability boundary of the ballooning mode in tokamaks is quite insensitive to whether a plasma is compressible or incompressible. The maximum growth rate of the kinetic ballooning mode is smaller than the magneto hydrodynamic counterpart typically by a factor of 5, and it does not exceed the ion transit frequency by a large margin. The findings may imply that the ballooning instability should not be as violent as conjectured to date, and explain the achievement in some tokamaks of stable discharge in the beta regime that should be magnetohydrodynamic ballooning unstable.

  16. Loop-voltage tomography in tokamaks using transient synchrotron radiation

    SciTech Connect

    Fisch, N.J.; Kritz, A.H. . Plasma Physics Lab.; Hunter Coll., New York, NY . Dept. of Physics)

    1989-07-01

    The loop voltage in tokamaks is particularly difficult to measure anywhere but at the plasma periphery. A brief, deliberate, perturbation of hot plasma electrons, however, produces a transient radiation response that is sensitive to this voltage. We investigate how such a radiation response can be used to diagnose the loop voltage. 24 refs., 6 figs.

  17. Gamma ray imager on the DIII-D tokamak

    NASA Astrophysics Data System (ADS)

    Pace, D. C.; Cooper, C. M.; Taussig, D.; Eidietis, N. W.; Hollmann, E. M.; Riso, V.; Van Zeeland, M. A.; Watkins, M.

    2016-04-01

    A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1-60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. First measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.

  18. Observation of finite-. beta. MHD phenomena in tokamaks

    SciTech Connect

    McGuire, K.M.

    1984-09-01

    Stable high-beta plasmas are required for the tokamak to attain an economical fusion reactor. Recently, intense neutral beam heating experiments in tokamaks have shown new effects on plasma stability and confinement associated with high beta plasmas. The observed spectrum of MHD fluctuations at high beta is clearly dominated by the n = 1 mode when the q = 1 surface is in the plasma. The m/n = 1/1 mode drives other n = 1 modes through toroidal coupling and n > 1 modes through nonlinear coupling. On PDX, with near perpendicular injection, a resonant interaction between the n = 1 internal kink and the trapped fast ions results in loss of beam particles and heating power. Key parameters in the theory are the value of q/sub 0/ and the injection angle. High frequency broadband magnetic fluctuations have been observed on ISX-B and D-III and a correlation with the deterioration of plasma confinement was reported. During enhanced confinement (H-mode) discharges in divertor plasmas, two new edge instabilities were observed, both localized radially near the separatrix. By assembling results from the different tokamak experiments, it is found that the simple theoretical ideal MHD beta limit has not been exceeded. Whether this represents an ultimate tokamak limit or if beta optimized configurations (Dee- or bean-shaped plasmas) can exceed this limit and perhaps enter a second regime of stability remains to be clarified.

  19. A design method of divertor in tokamak reactors

    NASA Astrophysics Data System (ADS)

    Ueda, N.; Itoh, S.-I.; Tanaka, M.; Itoh, K.

    1990-08-01

    Computational method to design the efficient divertor configuration in tokamak reactor is presented. The two dimensional code was developed to analyze the distributions of the plasma and neutral particles for realistic configurations. Using this code, a method to design the efficient divertor configuration is developed. An example of new divertor, which consists of the baffle and fin plates, is analyzed.

  20. Ballooning mode stability of elongated high-beta tokamaks

    NASA Astrophysics Data System (ADS)

    Mauel, Michael E.

    1987-12-01

    The variational principle derived by Choe and Freidberg [Phys. Fluids 29, 1766 (1986)] and used to estimate the geometry of high-beta tokamak equilibria is extended to include elongation. Ballooning mode stability is then investigated, illustrating the influence of elongation on local and global stability.

  1. Microtearing mode (MTM) turbulence in JIPPT-IIU tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Hamada, Y.; Watari, T.; Nishizawa, A.; Yamagishi, O.; Narihara, K.; Ida, K.; Kawasumi, Y.; Ido, T.; Kojima, M.; Toi, K.; the JIPPT-IIU Group

    2015-04-01

    Magnetic, density and potential fluctuations up to 500 kHz at several spatial points have been observed in the core region of JIPPT-IIU tokamak plasmas using a heavy ion beam probe. The frequency spectra of the density and magnetic oscillations are found to be similar, whereas there are large differences in the phase, coherence and frequency dependences deduced from signals at adjacent sample volumes. These differences allow us to ascribe the detected magnetic fluctuations to the microtearing mode (MTM) by simple dispersion relations of the MTM in collisionless and intermediate regimes. The frequency-integrated level of magnetic fluctuations around 150 kHz (100-200 kHz) is \\tilde{{B}}r /Bt ≈ 1× 10-4 , a level high enough for the ergodization of the magnetic surface and enhanced electron heat loss as derived by Rechester and Rosenbluth (1978 Phys. Rev. Lett. 40 38). This level is consistent with the measurements performed using cross-polarization scattering of microwaves in the Tore Supra tokamak. Our results are the first direct experimental verification of the MTM in the core region of tokamak plasmas, which has been recently observed in gyrokinetic simulations using a very fine mesh in tokamak and ST plasmas.

  2. Tight aspect ratio tokamak experiments and prospects for the future

    SciTech Connect

    Sykes, A; Peng, Yueng Kay Martin

    1995-01-01

    The present status of experimental results from low aspect ratio tokamaks is described, together with plans for physics experiments at the mega-amp level. Further development of the concept, and its potential for a materials/component test facility or ultimately a fusion power plant, are indicated.

  3. 2-D Imaging of Electron Temperature in Tokamak Plasmas

    SciTech Connect

    T. Munsat; E. Mazzucato; H. Park; C.W. Domier; M. Johnson; N.C. Luhmann Jr.; J. Wang; Z. Xia; I.G.J. Classen; A.J.H. Donne; M.J. van de Pol

    2004-07-08

    By taking advantage of recent developments in millimeter wave imaging technology, an Electron Cyclotron Emission Imaging (ECEI) instrument, capable of simultaneously measuring 128 channels of localized electron temperature over a 2-D map in the poloidal plane, has been developed for the TEXTOR tokamak. Data from the new instrument, detailing the MHD activity associated with a sawtooth crash, is presented.

  4. Gamma ray imager on the DIII-D tokamak.

    PubMed

    Pace, D C; Cooper, C M; Taussig, D; Eidietis, N W; Hollmann, E M; Riso, V; Van Zeeland, M A; Watkins, M

    2016-04-01

    A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1-60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. First measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.

  5. Induced emission of extraordinary mode radiation in tokamaks

    NASA Technical Reports Server (NTRS)

    Freund, H. P.; Lee, L. C.

    1979-01-01

    The implications of the formation of a positive slope in the runaway electron tail in tokamak plasmas are investigated in regard to the radiation in the vicinity of the electron plasma frequency. In particular, it is shown that the amplification of extraordinary mode waves may result.

  6. Gas feed system for the T-15 tokamak discharge chamber

    NASA Astrophysics Data System (ADS)

    Gulyaev, V. A.; Levkov, B. S.; Maslennikov, E. A.; Notkin, G. E.; Polkanov, V. N.; Shchedrov, V. M.

    Hydrogen (deuterium) and rare gas feed system for the T-15 tokamak discharge chamber is described. Fast-response pulsed piezovalve designs used in the gas feed system are presented. Problems of automated gas feed control, depending on discharge chamber wall gas saturation, diaphragm and plasma parameters, are considered.

  7. Midplane Faraday rotation: A densitometer for large tokamaks

    NASA Astrophysics Data System (ADS)

    Jobes, F. C.; Mansfield, D. K.

    1992-10-01

    The density in a large tokamak such as International Thermonuclear Experimental Reactor (ITER), or any of the proposed future US machines, can be determined by measuring the Faraday rotation of a 10.6 μm laser directed tangent to the toroidal field. If there is a horizontal array of such beams, then ne(R) can be readily obtained with a simple Abel inversion about the center line of the tokamak. For a large machine, operated at a full field of 30 T m and a density of 2×1020/m3, the rotation angle would be quite large-about 60° for two passes. A layout in which a single laser beam is fanned out in the horizontal midplane of the tokamak, with a set of retroreflectors on the far side of the vacuum vessel, would provide good spatial resolution, depending only upon the number of reflectors. With this proposed layout, only one window would be needed. Because the rotation angle is never more than 1 ``fringe,'' the data is always good, and it is also a continuous measurement in time. Faraday rotation is dependent only upon the plasma itself, and thus is not sensitive to vibration of the optical components. Simulations of the expected results show that ITER, or any large tokamak, existing or proposed, would be well served even at low densities by a midplane Faraday rotation densitometer of ˜64 channels.

  8. Connections between physics and economics for Tokamak fusion power plants

    NASA Astrophysics Data System (ADS)

    Krakowski, R. A.; Delene, J. G.

    1988-03-01

    A simplified physics, engineering, and costing model of a tokamak fusion reactor is used to examine quantitatively the connection between physics performance and power-plant economics. The material contained herein was generated as part of a broader study of the economic, safety, and environmental impact of fusion based on a range of confinement schemes, fusion fuels, blanket/shield configurations, power-conversion schemes, and commercial end products. Only a DT-fuelled tokamak reactor that produces electricity through an intermediate heat exchange and a conventional thermal-electric conversion cycle is considered; a self-cooled lithium-metal blanket with vanadium-alloy structure, steel shield, and superconducting magnets is used for all cases studied. An optimistic extension of Troyon scaling is applied to a high-elongation ( κ = 2.5) and low-safety-factor ( q ψ =2.3) plasma with β=0.1 and efficient ( I φ P CD =0.2 A/W) current drive. This 1200-MWe (net) power plant provides an economically competitive base case with which to compare other approaches to tokamak fusion power. The base case chosen for comparisons represents an optimistic extrapolation of present tokamak physics and technology. Troyon scaling with a coefficient β B φ a/ I φ equal to 0.04 is applied; the impact of an ad hoc but pessimistic scaling that diminished the Troyon coefficient with plasma elongation was also examined. Additionally, a constant current-drive efficiency, ϒ= nI φ R T / P CD =0.2 A/W, at T=10 keV plasma temperature is assumed; although representing an aggressive R&D target relative to present experience, the realization of bootstrap currents for the basecase, and especially for the second-stability-region tokamak, can significantly reduce this problem. The impact and reoptimization for a constant normalized current-drive efficiency, ϒ= nI φ R T/ P CD, was also examined. Although the focus of this study has been the optimistic basecase tokamak, comparisons are made with

  9. Electromagnetic Torque in Tokamaks with Toroidal Asymmetries

    SciTech Connect

    Logan, Nikolas Christopher

    2015-01-01

    Lithium and boron coatings are applied to the walls of many tokamaks to enhance performance and protect the underlying substrates. Li and B-coated high-Z substrates are planned for use in NSTX-U and are a candidate plasma-facing component (PFC) for DEMO. However, previous measurements of Li evaporation and thermal sputtering on low-flux devices indicate that the Li temperature permitted on such devices may be unacceptably low. Thus it is crucial to characterize gross and net Li erosion rates under high-flux plasma bombardment. Additionally, no quantitative measurements have been performed of the erosion rate of a boron-coated PFC during plasma bombardment. A realistic model for the compositional evolution of a Li layer under D bombardment was developed that incorporates adsorption, implantation, and diffusion. A model was developed for temperature-dependent mixed-material Li-D erosion that includes evaporation, physical sputtering, chemical sputtering, preferential sputtering, and thermal sputtering. The re-deposition fraction of a Li coating intersecting a linear plasma column was predicted using atomic physics information and by solving the Li continuity equation. These models were tested in the Magnum-PSI linear plasma device at ion fluxes of 10^23-10^24 m^-2 s^-1 and Li surface temperatures less than 800 degrees C. Li erosion was measured during bombardment with a neon plasma that will not chemically react with Li and the results agreed well with the erosion model. Next the ratio of the total D fluence to the areal density of the Li coating was varied to quantify differences in Li erosion under D plasma bombardment as a function of the D concentration. The ratio of D/Li atoms was calculated using the results of MD simulations and good agreement is observed between measurements and the predictions of the mixed-material erosion model. Li coatings are observed to disappear from graphite much faster than from TZM Mo, indicating that fast Li diffusion into the bulk

  10. LIDAR Thomson scattering for advanced tokamaks. Final report

    SciTech Connect

    Molvik, A.W.; Lerche, R.A.; Nilson, D.G.

    1996-03-18

    The LIDAR Thomson Scattering for Advanced Tokamaks project made a valuable contribution by combining LLNL expertise from the MFE Program: tokamak design and diagnostics, and the ICF Program and Physics Dept.: short-pulse lasers and fast streak cameras. This multidisciplinary group evaluated issues involved in achieving a factor of 20 higher high spatial resolution (to as small as 2-3 mm) from the present state of the art in LIDAR Thomson scattering, and developed conceptual designs to apply LIDAR Thomson scattering to three tokamaks: Upgraded divertor measurements in the existing DIII-D tokamak; Both core and divertor LIDAR Thomson scattering in the proposed (now cancelled) TPX; and core, edge, and divertor LIDAR Thomson scattering on the presently planned International Tokamak Experimental Reactor, ITER. Other issues were evaluated in addition to the time response required for a few millimeter spatial resolution. These include the optimum wavelength, 100 Hz operation of the laser and detectors, minimizing stray light - always the Achilles heel of Thomson scattering, and time dispersion in optics that could prevent good spatial resolution. Innovative features of our work included: custom short pulsed laser concepts to meet specific requirements, use of a prism spectrometer to maintain a constant optical path length for high temporal and spatial resolution, the concept of a laser focus outside the plasma to ionize gas and form an external fiducial to use in locating the plasma edge as well as to spread the laser energy over a large enough area of the inner wall to avoid laser ablation of wall material, an improved concept for cleaning windows between shots by means of laser ablation, and the identification of a new physics issue - nonlinear effects near a laser focus which could perturb the plasma density and temperature that are to be measured.

  11. Analytic model for coaxial helicity injection in tokamak plasmas

    SciTech Connect

    Weening, R. H.

    2011-12-15

    Using a partial differential equation for the time evolution of the mean-field poloidal magnetic flux that incorporates resistivity {eta} and hyper-resistivity {Lambda} terms, an exact analytic solution is obtained for steady-state coaxial helicity injection (CHI) in force-free large aspect ratio tokamaks. The analytic mean-field Ohm's law model allows for calculation of the tokamak CHI current drive efficiency and the plasma inductances at arbitrary levels of magnetic fluctuations, or dynamo activity. The results of the mean-field model suggest that CHI approaching Ohmic efficiency is only possible in tokamaks when the size of the effective current drive boundary layer, {delta}{identical_to}({Lambda}/{eta}){sup 1/2}, becomes greater than half the size of the plasma, {delta}>a/2, with a the plasma minor radius. The electron thermal diffusivity due to magnetic fluctuation induced transport is obtained from the expression {chi}{sub e}={Lambda}/{mu}{sub 0}d{sub e}{sup 2}, with {mu}{sub 0} the permeability of free space and d{sub e} the electron skin depth, which for typical tokamak fusion plasma parameters is on the order of a millimeter. Thus, the ratio of the energy confinement time to the resistive diffusion time in a tokamak plasma driven by steady-state CHI approaching Ohmic efficiency is shown to be constrained by the relation {tau}{sub E}/{tau}{sub {eta}}<(d{sub e}/a){sup 2}{approx_equal}10{sup -6}. The mean-field model suggests that steady-state CHI can be viewed most simply as a boundary layer of stochastically wandering magnetic field lines.

  12. Overview of the microwave tokamak experiment operation and developments

    NASA Astrophysics Data System (ADS)

    Lang, D. D.; Allen, S. L.; Bell, H. H.

    1991-09-01

    At Lawrence Livermore National Laboratory (LLNL), we assembled and presently operate the Microwave Tokamak Experiment (MTX) to demonstrate the feasibility of using intense microwave pulses (up to 6 GW peak power) from a free electron laser (FEL) to provide electron cyclotron heating (ECH) for use in tokamaks, particularly high field machines. The MTX consists primarily of the ALCATOR C tokamak and power supplies from MIT, along with FEL; the FEL is made up of the ETA-II linear induction accelerator and the IMP steady-state wiggler. A four-barrel pellet injector was added to the tokamak to produce peaked density profiles. The tokamak operations started in November 1988, with full duration plasmas being obtained at a toroidal field of both 5 and 9 tesla. Initial results were obtained with the single pulse 140 GHz FEL at peak power levels of 200 to 400 MW late in 1989. Due to excessive transverse electron beam motion, and arcing in the accelerator cells, the accelerator was modified. These modifications have been successfully tested on a small portion of the rebuilt accelerator and have been incorporated in the remaining portion of the accelerator. A 140 GHz, 400 kW gyrotron was used to perform preliminary heating experiments during the fall of 1990. This same gyrotron system is serving as the master oscillator for the burst mode FEL. The new IMP steady state wiggler will be used to produce the high power microwaves for the burst mode. The FEL construction has been completed, and it will be used for heating experiments scheduled for this fall. This paper describes the recent experimental operations. It also briefly outlines the additions and improvements to the experiment, which are described in more detail in companion papers at this conference.

  13. Controlling fusion yield in tokamaks with spin polarized fuel, and feasibility studies on the DIII-D tokamak

    SciTech Connect

    Pace, D. C.; Lanctot, M. J.; Jackson, G. L.; Sandorfi, Andy M.; Smith, S. P.; Wei, Xiangdong

    2015-09-21

    The march towards electricity production through tokamaks requires the construction of new facilities and the inevitable replacement of the previous generation. There are, however, research topics that are better suited to the existing tokamaks, areas of great potential that are not sufficiently mature for implementation in high power machines, and these provide strong support for a balanced policy that includes the redirection of existing programs. Spin polarized fusion, in which the nuclei of tokamak fuel particles are spin-aligned and favorably change both the fusion cross-section and the distribution of initial velocity vectors of charged fusion products, is described here as an example of a technological and physics topic that is ripe for development in a machine such as the DIII-D tokamak. In this study, such research and development experiments may not be efficient at the ITER-scale, while the plasma performance, diagnostic access, and collaborative personnel available within the United States’ magnetic fusion research program, and at the DIII-D facility in particular, provide a unique opportunity to further fusion progress.

  14. Controlling fusion yield in tokamaks with spin polarized fuel, and feasibility studies on the DIII-D tokamak

    DOE PAGES

    Pace, D. C.; Lanctot, M. J.; Jackson, G. L.; ...

    2015-09-21

    The march towards electricity production through tokamaks requires the construction of new facilities and the inevitable replacement of the previous generation. There are, however, research topics that are better suited to the existing tokamaks, areas of great potential that are not sufficiently mature for implementation in high power machines, and these provide strong support for a balanced policy that includes the redirection of existing programs. Spin polarized fusion, in which the nuclei of tokamak fuel particles are spin-aligned and favorably change both the fusion cross-section and the distribution of initial velocity vectors of charged fusion products, is described here asmore » an example of a technological and physics topic that is ripe for development in a machine such as the DIII-D tokamak. In this study, such research and development experiments may not be efficient at the ITER-scale, while the plasma performance, diagnostic access, and collaborative personnel available within the United States’ magnetic fusion research program, and at the DIII-D facility in particular, provide a unique opportunity to further fusion progress.« less

  15. Non-axisymmetric equilibrium reconstruction for stellarators, reversed field pinches and tokamaks

    SciTech Connect

    Hanson, James D.; Anderson, D.T.; Cianciosa, M.; Franz, P.; Hartwell, G. H.; Hirshman, Steven Paul; Knowlton, Stephen F.; Lao, Lang L.; Lazarus, Edward Alan; Marrelli, L.; Maurer, D. A.; Schmitt, J. C.; Sontag, A. C.; Stevenson, B. A.; Terranova, D.

    2013-01-01

    Axisymmetric equilibrium reconstruction using magnetohydrodynamic equilibrium solutions to the Grad Shafranov equation has long been an important tool for interpreting tokamak experiments. This paper describes recent results in non-axisymmetric (three-dimensional) equilibrium reconstruction of nominally axisymmetric plasmas (tokamaks and reversed field pinches (RFPs)), and fully non-axisymmetric plasmas (stellarators). Results from applying the V3FIT code to CTH and HSX stellarator plasmas, RFX-mod RFP plasmas and the DIII-D tokamak are presented.

  16. Configuration studies for a small-aspect-ratio tokamak stellarator hybrid

    SciTech Connect

    Carreras, B.A.; Lynch, V.E.; Ware, A.

    1996-08-01

    The use of modulated toroidal coils offers a new path to the tokamak-stellarator hybrids. Low-aspect-ratio configurations can be found with robust vacuum flux surfaces and rotational transform close to the transform of a reverse-shear tokamak. These configurations have clear advantages in minimizing disruptions and their effect and in reducing tokamak current drive needs. They also allow the study of low-aspect-ratio effects on stellarator confinement in small devices.

  17. Conceptual design of the tokamak radiation shielding for the Tokamak Physics Experiment (TPX)

    NASA Astrophysics Data System (ADS)

    Cole, M. J.; Nelson, B. E.; Jones, G. H.; Goranson, P. L.; Gohar, Y.; Liew, S. L.

    The tokamak radiation shielding includes the neutron and gamma shielding around the torus and penetrations required to (1) limit activation of components outside the shield to levels that permit hands-on maintenance, and (2) limit the nuclear heating of the superconducting coils and cold structure. The primary design drivers are space, the 350 C bakeout temperature, and cost; therefore, different shield materials were used for different shield components and locations. The shielding is divided into three areas: (1) torus shielding around the vacuum vessel, (2) duct shielding around the vacuum pumping ducts and vertical diagnostic ducts, and (3) penetration shielding in and around the radial ports. The major shield components include water between the walls of the vacuum vessel, lead monosilicate/boron carbide tiles that are attached to the exterior of the vacuum vessel, shield plugs that fill the openings of the large radial ports, and polyethylene/lead/boron shield blocks for duct shielding. A description of the shielding configuration and the performance and operational requirements are discussed.

  18. Conceptual design of the tokamak radiation shielding for the Tokamak Physics Experiment (TPX)

    SciTech Connect

    Cole, M.J.; Nelson, B.E.; Jones, G.H.; Goranson, P.L.; Gohar, Y.; Liew, S.L.

    1993-11-01

    The tokamak radiation shielding includes the neutron and gamma shielding around the torus and penetrations required to (1) limit activation of components outside the shield to levels that permit hands-on maintenance and (2) limit the nuclear heating of the superconducting coils and cold structure. The primary design drivers are space, the 350{degree}C bakeout temperature, and cost; therefore, different shield materials were used for different shield components and locations. The shielding is divided into three areas: (1) torus shielding around the vacuum vessel, (2) duct shielding around the vacuum pumping ducts and vertical diagnostic ducts, and (3) penetration shielding in and around the radial ports. The major shield components include water between the walls of the vacuum vessel, lead monosilicate/boron carbide tiles that are attached to the exterior of the vacuum vessel, shield plugs that rill the openings of the large radial ports, and polyethylene/lead/boron shield blocks for duct shielding. A description of the shielding configuration and the performance and operational requirements will be discussed.

  19. Enhanced confinement regimes and control technology in the DIII-D tokamak

    SciTech Connect

    Lohr, J.; Burrell, K.H.; Coda, S.

    1993-07-01

    Advanced tokamak performance has been demonstrated in the DIII-D tokamak in a series of experiments which brought together developments in technology and improved understanding of the physical principles underlying tokamak operation. The achievement of greatly improved confinement coupled with development of new systems for real time plasma control have permitted investigation of the heretofore hidden or poorly controlled variables which together determine global confinement. These experiments, which included work in transport and control of the plasma boundary, point toward development of operationally and economically attractive reactors based on the tokamak. Some of these experiments are described.

  20. Neural network prediction of some classes of tokamak disruptions

    NASA Astrophysics Data System (ADS)

    Hernandez, J. V.; Vannucci, A.; Tajima, T.; Lin, Z.; Horton, W.; McCool, S. C.

    1996-08-01

    The use of neural network algorithms for predicting minor and major disruptions in tokamaks is explored by analysing disruption data from the TEXT tokamak with two network architectures. Future values of the fluctuating magnetic signal are predicted based on L past values of the magnetic fluctuation signal measured by a single Mirnov coil. The time step used (=0.04 ms) corresponds to the experimental data sampling rate. Two kinds of approach are adopted for the network: the contiguous future prediction and the multi-time-scale prediction. Both networks are trained through the back-propagation algorithm with inertial terms and the strengths of the results are compared. The use of additional diamagnetic signals as a method of increasing the performance is suggested. The degree of success indicates that the magnetic fluctuations associated with the TEXT disruption data may be characterized by a low dimensional dynamical system

  1. Development of magnetohydrodynamic modes during sawteeth in tokamak plasmas

    SciTech Connect

    Firpo, M.-C.; Ettoumi, W.; Farengo, R.; Ferrari, H. E.; García-Martínez, P. L.; Lifschitz, A. F.

    2013-07-15

    A dynamical analysis applied to a reduced resistive magnetohydrodynamics model is shown to explain the chronology of the nonlinear destabilization of modes observed in tokamak sawteeth. A special emphasis is put on the nonlinear self-consistent perturbation of the axisymmetric m = n = 0 mode that manifests through the q-profile evolution. For the very low fusion-relevant resistivity values, the q-profile is shown to remain almost unchanged on the early nonlinear timescale within the central tokamak region, which supports a partial reconnection scenario. Within the resistive region, indications for a local flattening or even a local reversed-shear of the q-profile are given. The impact of this ingredient in the occurrence of the sawtooth crash is discussed.

  2. Molecular emission in the edge plasma of T-10 tokamak

    SciTech Connect

    Zimin, A. M.; Krupin, V. A.; Troynov, V. I.; Klyuchnikov, L. A.

    2015-12-15

    The experiments on recording molecular emission in the edge plasma of the T-10 tokamak are described. To obtain reliable spectra with sufficient spectral, temporal, and spatial resolution, the optical circuit is optimized for various experimental conditions. Typical spectra measured in two sections of the tokamak are shown. It is shown that, upon varying the parameters of the discharge, the molecular spectrum not only changes significantly in intensity but also undergoes a qualitative change in the rotational and vibrational structure. For a detailed analysis, we use the Fulcher-α system (d{sup 3}Π{sub u}–a{sup 3}Σ{sub g}{sup +}) of deuterium in the wavelength range from 590 to 640 nm. The rotational temperatures of ground state X{sup 1}Σ{sub g}{sup +} and upper excited state d{sup 3}Π{sub u} are estimated by the measured spectra.

  3. On the bootstrap current in stellarators and tokamaks

    SciTech Connect

    Helander, P.; Geiger, J.; Maassberg, H.

    2011-09-15

    The expression for the long-mean-free-path limit of the bootstrap current in stellarators is rederived in such a way that the expansion procedure is identical to that used in the corresponding calculation for a tokamak. In addition, the first correction due to finite collisionality is calculated and shown to vanish in quasi-isodynamic configurations without net current. This correction, which is proportional to the square root of the collisionality, is found to compare well with a numerical solution of the first-order drift kinetic equation in spherical tokamak geometry. Numerically, it appears that there is a similar correction in general stellarator geometry, which however depends on the strength of the radial electric field.

  4. Control of magnetic islands by pellet injection in tokamaks

    SciTech Connect

    Shaing, K. C.; Houlberg, W. A.; Peng, M.

    2007-07-15

    The appearance of magnetic islands in tokamaks degrades plasma confinement. It is therefore important to control or eliminate the growth of the islands to improve the performance of a tokamak. A theory is developed to control magnetic islands using the localized pressure gradient driven bootstrap current by injecting pellets at the O-point of the island to create a peaked plasma pressure profile inside the island. This localized bootstrap current replenishes the missing equilibrium bootstrap current density that causes the island to grow in the first place. It is shown that the effect of the localized bootstrap current tends to reduce or eliminate the original drive for the growth of the island in the island evolution equation. The theory is also valid for the localized bootstrap current created by localized heating, but with much less effectiveness. A possibility of eliminating the island by controlling the equilibrium profiles is also discussed.

  5. Controls of Magnetic Islands by Pellet Injection in Tokamaks

    SciTech Connect

    Shaing, K. C.; Houlberg, Wayne A; Peng, Yueng Kay Martin

    2007-01-01

    The appearance of magnetic islands in tokamaks degrades plasma confinement. It is therefore important to control or eliminate the growth of the islands to improve the performance of a tokamak. A theory is developed to control magnetic islands using the localized pressure gradient driven bootstrap current by injecting pellets at the O-point of the island to create a peaked plasma pressure profile inside the island. This localized bootstrap current replenishes the missing equilibrium bootstrap current density that causes the island to grow in the first place. It is shown that the effect of the localized bootstrap current tends to reduce or eliminate the original drive for the growth of the island in the island evolution equation. The theory is also valid for the localized bootstrap current created by localized heating, but with much less effectiveness. A possibility of eliminating the island by controlling the equilibrium profiles is also discussed.

  6. Control of magnetic islands by pellet injection in tokamaks

    SciTech Connect

    Shaing, K. C.; Rome, James A; Peng, Yueng Kay Martin

    2007-01-01

    The appearance of magnetic islands in tokamaks degrades plasma confinement. It is therefore important to control or eliminate the growth of the islands to improve the performance of a tokamak. A theory is developed to control magnetic islands using the localized pressure gradient driven bootstrap current by injecting pellets at the O-point of the island to create a peaked plasma pressure profile inside the island. This localized bootstrap current replenishes the missing equilibrium bootstrap current density that causes the island to grow in the first place. It is shown that the effect of the localized bootstrap current tends to reduce or eliminate the original drive for the growth of the island in the island evolution equation. The theory is also valid for the localized bootstrap current created by localized heating, but with much less effectiveness. A possibility of eliminating the island by controlling the equilibrium profiles is also discussed. (c) 2007 American Institute of Physics.

  7. Phase Contrast Imaging on the HL-2A Tokamak

    NASA Astrophysics Data System (ADS)

    Yu, Yi; Gong, Shaobo; Xu, Min; Jiang, Wei; Zhong, Wulv; Shi, Zhongbin; Wang, Huajie; Wu, Yifan; Yuan, Boda; Lan, Tao; Ye, Minyou; Duan, Xuru; HL-2A Team

    2016-10-01

    In this article we present the design of a phase contrast imaging (PCI) system on the HL-2A tokamak. This diagnostic is developed to infer line integrated plasma density fluctuations by measuring the phase shift of an expanded CO2 laser beam passing through magnetically confined high temperature plasmas. This system is designed to diagnose plasma density fluctuations with the maximum wavenumber of 66 cm-1. The designed wavenumber resolution is 2.09cm-1, and the time resolution is higher than 0.2 μs. The broad kρs ranging from 0.34 to 13.37 makes it suitable for turbulence measurement. An upgraded PCI system is also discussed, which is designed for the HL-2M tokamak. Supported by the National Magnetic Confinement Fusion Energy Research Project (Grant No. 2015GB120002), the National Natural Science Foundation of China (Grant No. 11375053, 11105144, 10905057, 11535013).

  8. 3D MHD disruptions simulations of tokamaks plasmas

    NASA Astrophysics Data System (ADS)

    Paccagnella, Roberto; Strauss, Hank; Breslau, Joshua

    2008-11-01

    Tokamaks Vertical Displacement Events (VDEs) and disruptions simulations in toroidal geometry by means of a single fluid visco-resistive magneto-hydro-dynamic (MHD) model are presented in this paper. The plasma model, implemented in the M3D code [1], is completed with the presence of a 2D homogeneous wall with finite resistivity. This allows the study of the relatively slowly growing magneto-hydro-dynamical perturbation, the resistive wall mode (RWM), which is, in this work, the main drive of the disruptions. Amplitudes and asymmetries of the halo currents pattern at the wall are also calculated and comparisons with tokamak experimental databases and predictions for ITER are given. [1] W. Park, E.V. Belova, G.Y. Fu, X.Z. Tang, H.R. Strauss, L.E. Sugiyama, Phys. Plasmas 6 (1999) 1796.

  9. Commissioning of heating neutral beams for COMPASS-D tokamak

    SciTech Connect

    Deichuli, P.; Davydenko, V.; Belov, V.; Gorbovsky, A.; Dranichnikov, A.; Ivanov, A.; Sorokin, A.; Mishagin, V.; Abdrashitov, A.; Kolmogorov, V.; Kondakov, A.

    2012-02-15

    Two neutral beam injectors have been developed for plasma heating on COMPASS-D tokamak (Institute of Plasma Physics, Prague). The 4-electrodes multihole ion-optical system with beam focusing was chosen to provide the low divergence 300 kW power in both deuterium and hydrogen atoms. The accelerating voltage is 40 kV at extracted ion current up to 15 A. The power supply system provides the continuous and modulated mode of the beam injection at a maximal pulse length 300 ms. The optimal arrangement of the cryopanels and the beam duct elements provides sufficiently short-length beamline which reduces the beam losses. The evolution of the impurities and molecular fraction content is studied in the process of the high voltage conditioning of the newly made ion sources. Two injectors of the same type have been successfully tested and are ready for operation at tokamak in IPP, Prague.

  10. Equilibrium calculations for plasma control in CIT (Compact Ignition Tokamak)

    SciTech Connect

    Strickler, D.J.; Peng, Y-K.M. . Fusion Engineering Design Center); Pomphrey, N.; Jardin, S.C. . Plasma Physics Lab.)

    1990-01-01

    The free-boundary equilibrium code VEQ provides equilibrium data that are used by the Tokamak Simulation Code (TSC) in design and analysis of the poloidal field (PF) system for the Compact Ignition Tokamak (CIT). VEQ serves as an important design tool for locating the PF coils and defining coil current trajectories and control systems for TSC. In this report, VEQ and its role in the TSC analysis of the CIT PF system are described. Equilibrium and coil current calculations are discussed, an overview of the CIT PF system is presented, a set of reference equilibria for modeling a complete discharge in CIT is described, and the concept of a plasma shape control matrix is introduced. 9 refs., 8 figs., 7 tabs.

  11. Three-dimensional equilibria in axially symmetric tokamaks

    PubMed Central

    Garabedian, Paul R.

    2006-01-01

    The NSTAB and TRAN computer codes have been developed to study equilibrium, stability, and transport in fusion plasmas with three-dimensional (3D) geometry. The numerical method that is applied calculates islands in tokamaks like the Doublet III-D at General Atomic and the International Thermonuclear Experimental Reactor. When bifurcated 3D solutions are used in Monte Carlo computations of the energy confinement time, a realistic simulation of transport is obtained. The significance of finding many 3D magnetohydrodynamic equilibria in axially symmetric tokamaks needs attention because their cumulative effect may contribute to the prompt loss of α particles or to crashes and disruptions that are observed. The 3D theory predicts good performance for stellarators. PMID:17159158

  12. Three-dimensional analysis of tokamaks and stellarators.

    PubMed

    Garabedian, Paul R

    2008-09-16

    The NSTAB equilibrium and stability code and the TRAN Monte Carlo transport code furnish a simple but effective numerical simulation of essential features of present tokamak and stellarator experiments. When the mesh size is comparable to the island width, an accurate radial difference scheme in conservation form captures magnetic islands successfully despite a nested surface hypothesis imposed by the mathematics. Three-dimensional asymmetries in bifurcated numerical solutions of the axially symmetric tokamak problem are relevant to the observation of unstable neoclassical tearing modes and edge localized modes in experiments. Islands in compact stellarators with quasiaxial symmetry are easier to control, so these configurations will become good candidates for magnetic fusion if difficulties with safety and stability are encountered in the International Thermonuclear Experimental Reactor (ITER) project.

  13. Analytical solutions for Tokamak equilibria with reversed toroidal current

    SciTech Connect

    Martins, Caroline G. L.; Roberto, M.; Braga, F. L.; Caldas, I. L.

    2011-08-15

    In tokamaks, an advanced plasma confinement regime has been investigated with a central hollow electric current with negative density which gives rise to non-nested magnetic surfaces. We present analytical solutions for the magnetohydrodynamic equilibria of this regime in terms of non-orthogonal toroidal polar coordinates. These solutions are obtained for large aspect ratio tokamaks and they are valid for any kind of reversed hollow current density profiles. The zero order solution of the poloidal magnetic flux function describes nested toroidal magnetic surfaces with a magnetic axis displaced due to the toroidal geometry. The first order correction introduces a poloidal field asymmetry and, consequently, magnetic islands arise around the zero order surface with null poloidal magnetic flux gradient. An analytic expression for the magnetic island width is deduced in terms of the equilibrium parameters. We give examples of the equilibrium plasma profiles and islands obtained for a class of current density profile.

  14. Three-dimensional analysis of tokamaks and stellarators

    PubMed Central

    Garabedian, Paul R.

    2008-01-01

    The NSTAB equilibrium and stability code and the TRAN Monte Carlo transport code furnish a simple but effective numerical simulation of essential features of present tokamak and stellarator experiments. When the mesh size is comparable to the island width, an accurate radial difference scheme in conservation form captures magnetic islands successfully despite a nested surface hypothesis imposed by the mathematics. Three-dimensional asymmetries in bifurcated numerical solutions of the axially symmetric tokamak problem are relevant to the observation of unstable neoclassical tearing modes and edge localized modes in experiments. Islands in compact stellarators with quasiaxial symmetry are easier to control, so these configurations will become good candidates for magnetic fusion if difficulties with safety and stability are encountered in the International Thermonuclear Experimental Reactor (ITER) project. PMID:18768807

  15. Equilibrium analysis of tokamak discharges with toroidal variation

    SciTech Connect

    Zwingmann, W.; Becoulet, M.; Moreau, Ph.; Nardon, E.

    2006-11-30

    Tokamaks provide a field structure that is almost axisymmetric around the torus axis. There are however always small toroidal variations due to the limited number of toroidal field coils, the magnetic field ripple. On the other hand, non-axisymmetric external fields are applied on purpose to ergodise the field structure close to the separatrix, to control the heat and particle transport across the plasma boundary. We present a perturbation method to calculate the magnetic field of tokamak discharges with with weak toroidal variation. The method is applied for the equilibrium reconstruction of Tore Supra discharges with toroidal ripple. The perturbation method does not rely on a flux surface representation and can therefore be applied to structures with magnetic islands. We obtain the plasma response to the field of ergodising external coils, as proposed for the ITER device.

  16. The effects of the magnetic equilibrium on tokamak edge instabilities

    NASA Astrophysics Data System (ADS)

    Wan, Weigang; Chen, Yang; Parker, Scott

    2013-10-01

    The general magnetic equilibrium of the ``full'' geometry is implemented in the global gyrokinetic turbulence code GEM. A mapping between the experimental coordinate (R , Z) and the simulation coordinate (r , θ) is calculated directly from the EQDSK file generated by the EFIT analysis. Tokamak edge simulations are carried out with general geometry. At the edge, the general magnetic equilibria differ significantly from that parametrized by the Miller equilibrium, and this difference has quantitative effects on the linear instabilities of the kinetic peeling ballooning mode and the kinetic ballooning mode found in our previous studies. The growth rates are quite sensitive to the magnetic equilibrium, especially with the Miller quantities of elongation and triangularity. Additionally, the calculation of the safety factor has great uncertainty near the separatrix, and this uncertainty may have important effects on tokamak stability.

  17. Numerical Study of Tokamak Equilibrium with Toroidal Flow on EAST

    NASA Astrophysics Data System (ADS)

    Ren, Qilong; Zhang, Cheng

    2006-09-01

    The effect of the toroidal flow on the equilibrium of tokamak plasmas is a sensitive point for high performance plasma and its precise control. In this paper the effect is studied numerically using the EFIT (Equilibrium Fitting) code on EAST (Experimental Advanced Superconducting Tokamak). Firstly, the numerical calculation exhibits a clear outward shift of pressure contour from the magnetic surfaces in the plasma core and the shift grows with the increase of the toroidal velocity. The peak shift of 8% is observed when the ratio between the plasma velocity and the Alfvén speed equals to 0.15. Secondly, it is shown that the magnetic surfaces shift outwards from those without flow. With a certain plasma current the safety factor on the magnetic axis decreases as the plasma flow velocity increases. The magnetic shear increases about 10% on the plasma boundary compared with the case without flow.

  18. Effects of Magnetic Measurement Uncertainty on Tokamak Equilibrium Reconstruction

    NASA Astrophysics Data System (ADS)

    Montgomery, A. L.; Lao, L. L.; Strait, E. J.; Taylor, T. S.

    2006-10-01

    Reconstruction of the magnetic topology and current density profile from external magnetic diagnostics is vital to the study of tokamak plasmas. It has long been suspected that external magnetic measurements may contain information about the current density near the edge of a shaped plasma. To better reconstruct this feature, the sensitivity of the reconstruction to uncertainty in magnetic measurements must be determined. This is done by analyzing existing DIII-D data for the effect of measurement uncertainty on the edge current density and the location of the separatrix. The new magnetic uncertainty matrix recently added to EFIT provides a basis for this numerical analysis, and these calculations are compared with simple analytical models. This study begins with examination of measurement error in the tokamak with no plasma, and continues to the more complicated plasma scenario. The relative importance of the various measurements can be determined, with the divertor X-point likely to be the most sensitive to the edge current density.

  19. Measurements of fusion reactions from a Tokamak plasma

    NASA Astrophysics Data System (ADS)

    Chrien, R. E.

    1981-11-01

    Tokamak fusion reaction diagnostics were extended to include measurements of d-t, dp-3He, and d-d (proton branch) reactions. The confinement and slowing down of 1 MeV d-d tritons were studied y measuring d-t meutrons. The first charged fusion products to be detected in a Tokamak were the 3 MeV d-d and 14.7 MeV d- 3He protons. Beam-target d-3He reactions were measured during deuterium beam injection to study the transport and vessel retention of helium. Large d-3He reaction rates were produced by ion cyclotron heating of a 3He minority in a deuterium plasma. Measurements of the reaction rate, energy spectrum, and decay time indicate that the reactions are produced by 200 - 400 keV3He ions. Sawtooth and m = 2 oscillations in the proton emission were observed.

  20. Experimental modelling of eddy currents and deflection for tokamak limiters

    SciTech Connect

    Hua, T.Q.; Knott, M.J.; Turner, L.R.; Wehrle, R.B.

    1986-11-01

    During plasma disruptions in a tokamak fusion reactor, eddy currents are induced in the limiters and other conducting structures surrounding the plasma. Interactions between these currents with the toroidal field causes deflection and stress in the structural components. The structural motion in the strong magnetic field induces additional eddy current opposing the initial eddy current and modifying subsequent structural dynamics. Therefore, the motion and current are coupled and must be solved simultaneously. The coupling between current and deflection in cantilevered beams was investigated experimentally. The beams provide a simple model for the limiter blade of a tokamak fusion reactor. Several test pieces and various magnetic field conditions were employed to study the extend of the coupling effect from weak to strong coupling. Experimental results are compared with analytical predictions.

  1. RF assisted Glow Discharge Condition experiment for SST-1 Tokamak

    NASA Astrophysics Data System (ADS)

    Raval, Dilip; Khan, Ziauddin; George, Siju; Dhanani, Kalpeshkumar R.; Paravastu, Yuvakiran; Semwal, Pratibha; Thankey, Prashant; Shoaib Khan, Mohammad; Kakati, Bharat; Pradhan, Subrata

    2017-04-01

    Impurity control reduces the radiation loss from plasma and hence enhances the plasma operation. Oxygen and water vapors are the most common impurities in tokamak devices. Water vapour can be reduced with extensive baking while in order to have a significant reduction in oxygen it is necessary to use glow discharge condition (GDC). RF assisted glow discharge cleaning system will be implemented to remove low z impurities at PFC installed SST-1 vacuum vessel. A RF assisted Glow discharge conditioning is studied at laboratory to find the optimum operating parameters in a view to implement at SST-1 tokamak. Helium is used as a fuel gas in the present experiment. It is observed that the ultimate impurity level is reduced significantly below to the accepted level for plasma operation after RF assisted GDC. The experimental findings of RF assisted Glow discharge conditioning is discussed in details in this paper.

  2. Multipoint Thomson scattering diagnostic for the ETE tokamak

    NASA Astrophysics Data System (ADS)

    Berni, L. A.; Alonso, M. P.; Oliveira, R. M.

    2004-10-01

    To measure the electron temperature and plasma density profiles on the Experimento Tokamak Esférico tokamak a multiplexed Thomson scattering diagnostic was implemented. The diagnostic is based on a 10 J ruby laser and a single five spectral channel filter polychromator. A collection lens with f/6.3 relay the scattered light from 23 spatial points to optical fibers. The fibers have a monotonous increasing length and are inserted into the polychromator. Between the collection lens and each fiber optic we have a microlens to match the numerical aperture and to enlarge the plasma observation volume. This work describes the project, the simulations, and the preliminary results obtained with the first four optical fibers.

  3. Tokamak Plasma Flows Induced by Local RF Forces

    NASA Astrophysics Data System (ADS)

    Chen, Jiale; Gao, Zhe

    2015-10-01

    The tokamak plasma flows induced by the local radio frequency (RF) forces in the core region are analyzed. The effective components of local RF forces are composed of the momentum absorption term and the resonant parallel momentum transport term (i.e. the parallel component of the resonant ponderomotive forces). Different momentum balance relations are employed to calculate the plasma flows depending on different assumptions of momentum transport. With the RF fields solved from RF simulation codes, the toroidal and poloidal flows by these forces under the lower hybrid current drive and the mode conversion ion cyclotron resonance heating on EAST-like plasmas are evaluated. supported by National Natural Science Foundation of China (Nos. 11405218, 11325524, 11375235 and 11261140327), in part by the National Magnetic Confinement Fusion Science Program of China (Nos. 2013GB111002, 2013GB112001 and 2013GB112010), and the Program of Fusion Reactor Physics and Digital Tokamak with the CAS “One-Three-Five” Strategic Planning

  4. Maintenance concept development for the Compact Ignition Tokamak

    SciTech Connect

    Macdonald, D.

    1988-01-01

    The Compact Ignition Tokamak (CIT), located at the Princeton Plasma Physics Laboratory, will be the next major experimental machine in the US Fusion Program. Its use of deuterium-tritium (D-T) fuel requires the use of remote handling technology to carry out maintenance operations on the machine. These operations consist of removing and repairing such components as diagnostic equipment modules by using remotely operated maintenance equipment. The major equipment being developed for maintenance external to the vacuum vessel includes both bridge-mounted and floor-mounted manipulator systems. Additionally, decontamination (decon) equipment, hot cell repair facilities, and equipment for handling and packaging solid radioactive waste (rad-waste) are being developed. Recent design activities have focused on establishing maintenance system interfaces with the facility design, developing manipulator system requirements, and using mock-ups to support the tokamak configuration design. 3 refs., 8 figs.

  5. Three-dimensional analysis of tokamaks and stellarators

    NASA Astrophysics Data System (ADS)

    Garabedian, Paul R.

    2008-09-01

    The NSTAB equilibrium and stability code and the TRAN Monte Carlo transport code furnish a simple but effective numerical simulation of essential features of present tokamak and stellarator experiments. When the mesh size is comparable to the island width, an accurate radial difference scheme in conservation form captures magnetic islands successfully despite a nested surface hypothesis imposed by the mathematics. Three-dimensional asymmetries in bifurcated numerical solutions of the axially symmetric tokamak problem are relevant to the observation of unstable neoclassical tearing modes and edge localized modes in experiments. Islands in compact stellarators with quasiaxial symmetry are easier to control, so these configurations will become good candidates for magnetic fusion if difficulties with safety and stability are encountered in the International Thermonuclear Experimental Reactor (ITER) project.

  6. Pulse length assessment of compact ignition tokamak designs

    SciTech Connect

    Stotler, D.P.; Pomphrey, N.

    1989-07-01

    A time-dependent zero-dimensional code has been developed to assess the pulse length and auxiliary heating requirements of Compact Ignition Tokamak (CIT) designs. By taking a global approach to the calculation, parametric studies can be easily performed. The accuracy of the procedure is tested by comparing with the Tokamak Simulation Code which uses theory-based thermal diffusivities. A series of runs is carried out at various levels of energy confinement for each of three possible CIT configurations. It is found that for cases of interest, ignition or an energy multiplication factor Q /approx gt/ 7 can be attained within the first half of the planned five-second flattop with 10--40 MW of auxiliary heating. These results are supported by analytic calculations. 18 refs., 7 figs., 2 tabs.

  7. Gyrokinetic Simulation of Global Turbulent Transport Properties in Tokamak Experiments

    SciTech Connect

    Wang, W.X.; Lin, Z.; Tang, W.M.; Lee, W.W.; Ethier, S.; Lewandowski, J.L.V.; Rewoldt, G.; Hahm, T.S.; Manickam, J.

    2006-01-01

    A general geometry gyro-kinetic model for particle simulation of plasma turbulence in tokamak experiments is described. It incorporates the comprehensive influence of noncircular cross section, realistic plasma profiles, plasma rotation, neoclassical (equilibrium) electric fields, and Coulomb collisions. An interesting result of global turbulence development in a shaped tokamak plasma is presented with regard to nonlinear turbulence spreading into the linearly stable region. The mutual interaction between turbulence and zonal flows in collisionless plasmas is studied with a focus on identifying possible nonlinear saturation mechanisms for zonal flows. A bursting temporal behavior with a period longer than the geodesic acoustic oscillation period is observed even in a collisionless system. Our simulation results suggest that the zonal flows can drive turbulence. However, this process is too weak to be an effective zonal flow saturation mechanism.

  8. Collisionless microtearing modes in hot tokamaks: Effect of trapped electrons

    SciTech Connect

    Swamy, Aditya K.; Ganesh, R.; Brunner, S.; Vaclavik, J.; Villard, L.

    2015-07-15

    Collisionless microtearing modes have recently been found linearly unstable in sharp temperature gradient regions of large aspect ratio tokamaks. The magnetic drift resonance of passing electrons has been found to be sufficient to destabilise these modes above a threshold plasma β. A global gyrokinetic study, including both passing electrons as well as trapped electrons, shows that the non-adiabatic contribution of the trapped electrons provides a resonant destabilization, especially at large toroidal mode numbers, for a given aspect ratio. The global 2D mode structures show important changes to the destabilising electrostatic potential. The β threshold for the onset of the instability is found to be generally downshifted by the inclusion of trapped electrons. A scan in the aspect ratio of the tokamak configuration, from medium to large but finite values, clearly indicates a significant destabilizing contribution from trapped electrons at small aspect ratio, with a diminishing role at larger aspect ratios.

  9. Plasma shaping effects on tokamak scrape-off layer turbulence

    NASA Astrophysics Data System (ADS)

    Riva, Fabio; Lanti, Emmanuel; Jolliet, Sébastien; Ricci, Paolo

    2017-03-01

    The impact of plasma shaping on tokamak scrape-off layer (SOL) turbulence is investigated. The drift-reduced Braginskii equations are written for arbitrary magnetic geometries, and an analytical equilibrium model is used to introduce the dependence of turbulence equations on tokamak inverse aspect ratio (ε ), Shafranov’s shift (Δ), elongation (κ), and triangularity (δ). A linear study of plasma shaping effects on the growth rate of resistive ballooning modes (RBMs) and resistive drift waves (RDWs) reveals that RBMs are strongly stabilized by elongation and negative triangularity, while RDWs are only slightly stabilized in non-circular magnetic geometries. Assuming that the linear instabilities saturate due to nonlinear local flattening of the plasma gradient, the equilibrium gradient pressure length {L}p=-{p}e/{{\

  10. Long slide-away discharges in the COMPASS tokamak

    NASA Astrophysics Data System (ADS)

    Ficker, Ondrej; Mlynar, Jan; Vlainic, Milos; Weinzettl, Vladimir; Urban, Jakub; Cavalier, Jordan; Havlicek, Jaroslav; Panek, Radomir; Hron, Martin; Cerovsky, Jaroslav; Vondracek, Petr; Paprok, Richard; Decker, Joan; Peysson, Yves; Bogar, Ondrej; Stahl, Adam; Compass Team

    2016-10-01

    In this contribution, long runaway electron (RE) dominated discharges achieved in the COMPASS tokamak are presented. The extensive length is possible due to a low consumption of available volt-seconds of the tokamak transformer in this type of discharge. Energetic electron losses in this regime seems to be modulated mainly by small oscillations of a radial position (controller setting) unlike in the RE discharges at higher electron density, where various MHD phenomena affect the evolution of the losses. The behaviour of the slide-away plasma is studied using magnetic coils, HXR detectors, ECE system and a pair of 3He proportional counters of neutrons. The plasma scenario is also modelled using Fokker-Planck codes. EUROfusion WP MST1, MST2.

  11. Internal disruptions and RHF in IR-T1 tokamak

    SciTech Connect

    Ghoranneviss, M.; Masnavi, M.; Khademian, A.

    1996-12-31

    Sawtooth oscillations are observed on IR-T1 Tokamak during low ql discharge with a disruption time of about 30--60 {micro}s. The q = 1 singular surface occurs at radius 3--3.5 cm and inverted Sawtooth from chords outside this radius. The superimposed (m = 1) oscillation with a frequency of about 19 kHz {approx} 25 kHz, according to the tokamak discharges parameters, preceding the Sawtooth oscillation. One major effect the Sawtooth oscillation is to flatten the temperature and density profiles approximately out to a mixing radius rm = {radical}2 rs,. Furthermore, by applying RHFs (L = 2 and L = 3), the Sawtooth behavior is modified. The magnitude of the weak RHFs used in the experiments did not exceed 1% of Bp. Results showed that the weak RHFs magnetic perturbation would change the MHD instabilities and the Sawtooth behavior, as well as plasma, confinement.

  12. Theory of magnetohydrodynamic instabilities excited by energetic particles in tokamaks

    SciTech Connect

    Chen, L. )

    1994-07-20

    The resonant excitations of high-n magnetohydrodynamic (MHD) instabilities by the energetic ions/alpha particles in tokamaks are theoretically analyzed. Here, n is the toroidal mode number. Since, typically, the MHD modes consist of two-scale structures; one singular ( inertial'') region and one regular (ideal) region, the energetic particle contributions in the singular region are suppressed by the finite-size orbits. Analytical dispersion relations can then be derived via the asymptotic matching analysis. The dispersion relations have the generic form of the fishbone'' dispersion relation and demonstrate, in particular, the existence of two types of modes; that is, the MHD gap mode and the energetic-particle continuum mode. Specific expressions are given for both the kinetic ballooning modes (KBM) and the toroidal Alfven modes (TAM). It is suggested that the stability property may be qualitatively regarded as the hybrid'' of conventional MHD tokamaks and field reversed ion rings. [copyright]American Institute of Physics

  13. Residual zonal flows in tokamaks and stellarators at arbitrary wavelengths

    NASA Astrophysics Data System (ADS)

    Monreal, Pedro; Calvo, Iván; Sánchez, Edilberto; Parra, Félix I.; Bustos, Andrés; Könies, Axel; Kleiber, Ralf; Görler, Tobias

    2016-04-01

    In the linear collisionless limit, a zonal potential perturbation in a toroidal plasma relaxes, in general, to a non-zero residual value. Expressions for the residual value in tokamak and stellarator geometries, and for arbitrary wavelengths, are derived. These expressions involve averages over the lowest order particle trajectories, that typically cannot be evaluated analytically. In this work, an efficient numerical method for the evaluation of such expressions is reported. It is shown that this method is faster than direct gyrokinetic simulations performed with the Gene and EUTERPE codes. Calculations of the residual value in stellarators are provided for much shorter wavelengths than previously available in the literature. Electrons must be treated kinetically in stellarators because, unlike in tokamaks, kinetic electrons modify the residual value even at long wavelengths. This effect, that had already been predicted theoretically, is confirmed by gyrokinetic simulations.

  14. [alpha]-particle transport-driven current in tokamaks

    SciTech Connect

    Heikkinen, J.A. ); Sipilae, S.K. )

    1995-03-01

    It is shown that the radial transport of fusion-born energetic [alpha] particles, induced by electrostatic waves traveling in one poloidal direction, is directly connected to a net momentum of [alpha] particles in the toroidal direction in tokamaks. Because the momentum change is almost independent of toroidal velocity, the energy required for the momentum generation remains small on an [alpha]-particle population sustained by an isotropic time-independent source. By numerical toroidal Monte Carlo calculations it is shown that the current carried by [alpha] particles in the presence of intense well penetrated waves can reach several mega-amperes in reactor-sized tokamaks. The current obtained can greatly exceed the neoclassical bootstrap current of the [alpha] particles.

  15. Advances in Dust Detection and Removal for Tokamaks

    NASA Astrophysics Data System (ADS)

    Campos, A.; Skinner, C. H.; Roquemore, A. L.; Leisure, J. O. V.; Wagner, S.

    2008-11-01

    Dust diagnostics and removal techniques are vital for the safe operation of next step fusion devices such as ITER. An electrostatic dust detector[1] developed in the laboratory is being applied to NSTX. In the tokamak environment, large particles or fibres can fall on the grid potentially causing a permanent short. We report on the development of a gas puff system that uses helium to clear such particles from the detector. Experiments with varying nozzle designs, backing pressures, puff durations, and exit flow orientations have obtained an optimal configuration that effectively removes particles from a 25 cm^2 area. Dust removal from next step tokamaks will be required to meet regulatory dust limits. A tripolar grid of fine interdigitated traces has been designed that generates an electrostatic travelling wave for conveying dust particles to a ``drain.'' First trials have shown particle motion in optical microscope images. [1] C. H. Skinner et al., J. Nucl. Mater., 376 (2008) 29.

  16. Particle diffusion in tokamaks with partially destroyed magnetic surfaces

    SciTech Connect

    Boozer, A.H.; White, R.B.

    1982-02-01

    A Hamiltonian formalism is developed for the drift orbit trajectories of particles in toroidal systems in the presence of stochastic fields. The equations of motion are integrated numerically to investigate the modification of neoclassical diffusion in a Tokamak due to the onset of stochasticity. Quasilinear diffusion is observed for fields with well developed stochasticity. A significant increase in the diffusion coefficient is observed below the stochastic threshold for electrons, whereas ions are typically not affected until the magnetic field has become quite stochastic.

  17. Advanced Tokamak Plasmas in the Fusion Ignition Research Experiment

    SciTech Connect

    C.E. Kessel; D. Meade; D.W. Swain; P. Titus; M.A. Ulrickson

    2003-10-13

    The Advanced Tokamak (AT) capability of the Fusion Ignition Research Experiment (FIRE) burning plasma experiment is examined with 0-D systems analysis, equilibrium and ideal-MHD stability, radio-frequency current-drive analysis, and full discharge dynamic simulations. These analyses have identified the required parameters for attractive burning AT plasmas, and indicate that these are feasible within the engineering constraints of the device.

  18. The Aneutronic Rodless Ultra Low Aspect Ratio Tokamak

    NASA Astrophysics Data System (ADS)

    Ribeiro, Celso

    2016-10-01

    The replacement of the metal centre-post in spherical tokamaks (STs) by a plasma centre-post (PCP, the TF current carrier) is the ideal scenario for a ST reactor. A simple rodless ultra low aspect-ratio tokamak (RULART) using a screw-pinch PCP ECR-assisted with an external solenoid has been proposed in the most compact RULART [Ribeiro C, SOFE-15]. There the solenoid provided the stabilizing field for the PCP and the toroidal electrical field for the tokamak start-up, which will stabilize further the PCP, acting as stabilizing closed conducting surface. Relative low TF will be required. The compactness (high ratio of plasma-spherical vessel volume) may provide passive stabilization and easier access to L-H mode transition. It is presented here: 1) stability analysis of the PCP (initially MHD stable due to the hollow J profile); 2) tokamak equilibrium simulations, and 3) potential use for aneutronic reactions studies via pairs of proton p and boron 11B ion beams in He plasmas. The beams' line-of-sights sufficiently miss the sources of each other, thus allowing a near maximum relative velocities and reactivity. The reactions should occur close to the PCP mid-plane. Some born alphas should cross the PCP and be dragged by the ion flow (higher momentum exchange) towards the anode but escape directly to a direct electricity converter. Others will reach evenly the vessel directly or via thermal diffusion (favourable heating by the large excursion 2a), leading to the lowest power wall load possible. This might be a potential hybrid direct-steam cycle conversion reactor scheme, nearly aneutronic, and with no ash or particle retention problems, as opposed to the D-T thermal reaction proposals.

  19. Momentum injection in tokamak plasmas and transitions to reduced transport.

    PubMed

    Parra, F I; Barnes, M; Highcock, E G; Schekochihin, A A; Cowley, S C

    2011-03-18

    The effect of momentum injection on the temperature gradient in tokamak plasmas is studied. A plausible scenario for transitions to reduced transport regimes is proposed. The transition happens when there is sufficient momentum input so that the velocity shear can suppress or reduce the turbulence. However, it is possible to drive too much velocity shear and rekindle the turbulent transport. The optimal level of momentum injection is determined. The reduction in transport is maximized in the regions of low or zero magnetic shear.

  20. Viscous damping of toroidal angular momentum in tokamaks

    SciTech Connect

    Stacey, W. M.

    2014-09-15

    The Braginskii viscous stress tensor formalism was generalized to accommodate non-axisymmetric 3D magnetic fields in general toroidal flux surface geometry in order to provide a representation for the viscous damping of toroidal rotation in tokamaks arising from various “neoclassical toroidal viscosity” mechanisms. In the process, it was verified that the parallel viscosity contribution to damping toroidal angular momentum still vanishes even in the presence of toroidal asymmetries, unless there are 3D radial magnetic fields.

  1. Tokamak Startup Using Point-Source dc Helicity Injection

    SciTech Connect

    Battaglia, D. J.; Bongard, M. W.; Fonck, R. J.; Redd, A. J.; Sontag, A. C.

    2009-06-05

    Startup of a 0.1 MA tokamak plasma is demonstrated on the ultralow aspect ratio Pegasus Toroidal Experiment using three localized, high-current density sources mounted near the outboard midplane. The injected open field current relaxes via helicity-conserving magnetic turbulence into a tokamaklike magnetic topology where the maximum sustained plasma current is determined by helicity balance and the requirements for magnetic relaxation.

  2. Thermally excited proton spin-flip laser emission in tokamaks

    SciTech Connect

    Arunasalam, V.; Greene, G.J.

    1993-07-01

    Based on statistical thermodynamic fluctuation arguments, it is shown here for the first time that thermally excited spin-flip laser emission from the fusion product protons can occur in large tokamak devices that are entering the reactor regime of operation. Existing experimental data from TFTR supports this conjecture, in the sense that these measurements are in complete agreement with the predictions of the quasilinear theory of the spin-flip laser.

  3. Multi-field plasma sandpile model in tokamaks and applications

    NASA Astrophysics Data System (ADS)

    Peng, X. D.; Xu, J. Q.

    2016-08-01

    A multi-field sandpile model of tokamak plasmas is formulated for the first time to simulate the dynamic process with interaction between avalanche events on the fast/micro time-scale and diffusive transports on the slow/macro time-scale. The main characteristics of the model are that both particle and energy avalanches of sand grains are taken into account simultaneously. New redistribution rules of a sand-relaxing process are defined according to the transport properties of special turbulence which allows the uphill particle transport. Applying the model, we first simulate the steady-state plasma profile self-sustained by drift wave turbulences in the Ohmic discharge of a tokamak. A scaling law as f = a q0 b + c for the relation of both center-density n ( 0 ) and electron (ion) temperatures T e ( 0 ) ( T i ( 0 ) ) with the center-safety-factor q 0 is found. Then interesting work about the nonlocal transport phenomenon observed in tokamak experiments proceeds. It is found that the core electron temperature increases rapidly in response to the edge cold pulse and inversely it decreases in response to the edge heat pulse. The results show that the nonlocal response of core electron temperature depending on the amplitudes of background plasma density and temperature is more remarkable in a range of gas injection rate. Analyses indicate that the avalanche transport caused by plasma drift instabilities with thresholds is a possible physical mechanism for the nonlocal transport in tokamaks. It is believed that the model is capable of being applied to more extensive questions occurring in the transport field.

  4. UCLA program in reactor studies: The ARIES tokamak reactor study

    SciTech Connect

    Not Available

    1991-01-01

    The ARIES research program is a multi-institutional effort to develop several visions of tokamak reactors with enhanced economic, safety, and environmental features. The aims are to determine the potential economics, safety, and environmental features of a range of possible tokamak reactors, and to identify physics and technology areas with the highest leverage for achieving the best tokamak reactor. Four ARIES visions are currently planned for the ARIES program. The ARIES-1 design is a DT-burning reactor based on modest'' extrapolations from the present tokamak physics database and relies on either existing technology or technology for which trends are already in place, often in programs outside fusion. ARIES-2 and ARIES-4 are DT-burning reactors which will employ potential advances in physics. The ARIES-2 and ARIES-4 designs employ the same plasma core but have two distinct fusion power core designs; ARIES-2 utilize the lithium as the coolant and breeder and vanadium alloys as the structural material while ARIES-4 utilizes helium is the coolant, solid tritium breeders, and SiC composite as the structural material. Lastly, the ARIES-3 is a conceptual D-{sup 3}He reactor. During the period Dec. 1, 1990 to Nov. 31, 1991, most of the ARIES activity has been directed toward completing the technical work for the ARIES-3 design and documenting the results and findings. We have also completed the documentation for the ARIES-1 design and presented the results in various meetings and conferences. During the last quarter, we have initiated the scoping phase for ARIES-2 and ARIES-4 designs.

  5. Heavy Neutral Beam Probe for Edge Plasma Analysis in Tokamaks

    SciTech Connect

    Castracane, J.

    2001-01-04

    The Heavy Neutral Beam Probe (HNBP) developed initially with DOE funding under the Small Business Innovation Research (SBIR) program was installed on the Tokamak de Varennes (TdeV) at the CCFM. This diagnostic was designed to perform fundamental measurements of edge plasma properties. The hardware was capable of measuring electron density and potential profiles with high spatial and temporal resolution. Fluctuation spectra for these parameters were obtained with HNBP for transport studies.

  6. Flux generation in ultra-low- q tokamak discharges

    SciTech Connect

    Schmid, P.; Barrick, G.; Greene, P. ); Robertson, S. )

    1991-04-01

    Spontaneous generation of toroidal flux is observed in a reversed-field pinch device operated as an ultra-low-{ital q} tokamak with a safety factor on axis of 1/4. An initial toroidal bias field of 150 G is increased to 600 G on axis in 300 {mu}sec while the field at the wall is held nearly constant. Sawteeth are observed, which indicate cyclic magnetic reconnection.

  7. Advanced tokamak operations with ICRF and lower-hybrid power

    NASA Astrophysics Data System (ADS)

    Mau, T. K.; Lee, B. J.; Ehst, D. A.

    1994-10-01

    Advanced tokamak operating modes based on high bootstrap current, first- and second-stability regime plasma are examined in the context of the TPX experiment and the ARIES reactors, using a combination of ICRF fast wave and lower hybrid power. The main method of analysis entails the alignment of driven current density profiles with those required for stability. In most of the cases studied, the required power levels and launched spectra are found to be reasonable.

  8. Mode Analysis with Autocorrelation Method (Single Time Series) in Tokamak

    NASA Astrophysics Data System (ADS)

    Saadat, Shervin; Salem, Mohammad K.; Goranneviss, Mahmoud; Khorshid, Pejman

    2010-08-01

    In this paper plasma mode analyzed with statistical method that designated Autocorrelation function. Auto correlation function used from one time series, so for this purpose we need one Minov coil. After autocorrelation analysis on mirnov coil data, spectral density diagram is plotted. Spectral density diagram from symmetries and trends can analyzed plasma mode. RHF fields effects with this method ate investigated in IR-T1 tokamak and results corresponded with multichannel methods such as SVD and FFT.

  9. Tokamak magnetic islands in the presence of nonaxisymmetric perturbations

    SciTech Connect

    Reiman, A.H.

    1991-07-01

    The effects of a small, externally imposed, nonaxisymmetric magnetic field perturbation on magnetic islands are studied analytically, assuming zero {beta}, tokamak ordering, and narrow islands. For the tearing stable case, the conditions under which the self-consistent plasma response is self-healing or amplifying are elucidated. For the tearing unstable case, the quasilinear theory of tearing modes is extended to a description of locked modes. 16 refs., 12 figs.

  10. A moving finite element model of the tokamak scrapeoff layer

    SciTech Connect

    Glasser, A.H.; Kuprat, A.P.

    1993-10-01

    Most numerical simulations of the tokamak scrapeoff layer use a mapping to flux coordinates and a piecewise equidistributed grid in those coordinates to resolve the multiple length scales and anisotropy characteristic of this problem. We have developed an alternative numerical method using simple cylindrical coordinates with a complex adaptive grid scheme. It is based on an understructured grid of traingles which move adaptively, aligning themselves with the magnetic field and concentrating in regions of sharp gradients.

  11. Thermally excited proton spin-flip laser emission in tokamaks

    SciTech Connect

    Arunasalam, V.; Greene, G.J.

    1993-07-01

    Based on statistical thermodynamic fluctuation arguments, it is shown here for the first time that thermally excited spin-flip laser emission from the fusion product protons can occur in large tokamak devices that are entering the reactor regime of operation. Existing experimental data from TFTR supports this conjecture, in the sense that these measurements are in complete agreement with the predictions of the quasilinear theory of the spin-flip laser.

  12. Design of geometric phase measurement in EAST Tokamak

    SciTech Connect

    Lan, T.; Liu, H. Q. Jie, Y. X.; Gao, X.; Liu, J.; Wang, Y. L.; Qin, H.

    2016-07-15

    The optimum scheme for geometric phase measurement in EAST Tokamak is proposed in this paper. The theoretical values of geometric phase for the probe beams of EAST Polarimeter-Interferometer (POINT) system are calculated by path integration in parameter space. Meanwhile, the influences of some controllable parameters on geometric phase are evaluated. The feasibility and challenge of distinguishing geometric effect in the POINT signal are also assessed in detail.

  13. Momentum Injection in Tokamak Plasmas and Transitions to Reduced Transport

    SciTech Connect

    Parra, F. I.; Highcock, E. G.; Schekochihin, A. A.; Barnes, M.

    2011-03-18

    The effect of momentum injection on the temperature gradient in tokamak plasmas is studied. A plausible scenario for transitions to reduced transport regimes is proposed. The transition happens when there is sufficient momentum input so that the velocity shear can suppress or reduce the turbulence. However, it is possible to drive too much velocity shear and rekindle the turbulent transport. The optimal level of momentum injection is determined. The reduction in transport is maximized in the regions of low or zero magnetic shear.

  14. Design of geometric phase measurement in EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Lan, T.; Liu, H. Q.; Liu, J.; Jie, Y. X.; Wang, Y. L.; Gao, X.; Qin, H.

    2016-07-01

    The optimum scheme for geometric phase measurement in EAST Tokamak is proposed in this paper. The theoretical values of geometric phase for the probe beams of EAST Polarimeter-Interferometer (POINT) system are calculated by path integration in parameter space. Meanwhile, the influences of some controllable parameters on geometric phase are evaluated. The feasibility and challenge of distinguishing geometric effect in the POINT signal are also assessed in detail.

  15. Stationary Flowing Liquid Lithium (SFLiLi) systems for tokamaks

    NASA Astrophysics Data System (ADS)

    Zakharov, Leonid; Gentile, Charles; Roquemore, Lane

    2013-10-01

    The present approach to magnetic fusion which relies on high recycling plasma-wall interaction has exhausted itself at the level of TFTR, JET, JT-60 devices with no realistic path to the burning plasma. Instead, magnetic fusion needs a return to its original idea of insulation of the plasma from the wall, which was the dominant approach in the 1970s and upon implementations has a clear path to the DEMO device with PDT ~= 100 MW and Qelectric > 1 . The SFLiLi systems of this talk is the technology tool for implementation of the guiding idea of magnetic fusion. It utilizes the unique properties of flowing LiLi to pump plasma particles and, thus, insulate plasma from the walls. The necessary flow rate, ~= 1 g3/s, is very small, thus, making the use of lithium practical and consistent with safety requirements. The talk describes how chemical activity of LiLi, which is the major technology challenge of using LiLi in tokamaks, is addressed by SFLiLi systems at the level of already performed (HT-7) experiment, and in ongoing implementations for a prototype of SFLiLi for tokamak divertors and the mid-plane limiter for EAST tokamak (to be tested in the next experimental campaign). This work is supported by US DoE contract No. DE-AC02-09-CH11466.

  16. Optimization study of normal conductor tokamak for commercial neutron source

    NASA Astrophysics Data System (ADS)

    Fujita, T.; Sakai, R.; Okamoto, A.

    2017-05-01

    The optimum conceptual design of tokamak with normal conductor coils was studied for minimizing the cost for producing a given neutron flux by using a system code, PEC. It is assumed that the fusion neutrons are used for burning transuranics from the fission reactor spent fuel in the blanket and a fraction of the generated electric power is circulated to opearate the tokamak with moderate plasma fusion gain. The plasma performance was assumed to be moderate ones; {β\\text{N}}~∼ ~3{--}4 in the aspect ratio A~=~2{--}3 and {{H}98y2}~=~1 . The circulating power is an important factor affecting the cost. Though decreasing the aspect ratio is useful to raise the plasma beta and decrease the toroidal field, the maximum field in the coil starts to rise in the very low aspect ratio range and then the circulating power increases with decrease in the plasma aspect ratio A below A~∼ ~2 , while the construction cost increases with A . As a result, the cost per neutron has its minimum around A~∼ ~2.2 , namely, between ST and the conventional tokamak. The average circulating power fraction is expected to be ~51%.

  17. Microwave Imaging Reflectometer (MIR) Development for the EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Domier, Calvin; Hu, Xing; Spear, Alexander; Zhu, Yilun; Xie, Jinlin; Luhmann, Neville

    2016-10-01

    An upgraded MIR system is being developed for the EAST tokamak based on the successful DIII-D MIR system. The EAST MIR system has 8 radial channels consisting of 8 independent probing frequencies ranging from 75 to 103 GHz, driven by fast tuning synthesizers and active frequency multipliers. There are 12 poloidal channels in the heterodyne down-conversion receiver system, with each channel corresponding to a separate poloidal position inside the tokamak. The down-conversion electronics are designed to optimize signal to noise ratio and are embedded with a microcontroller to realize remote computer control. Considerable improvements are also seen in the front-end plasma facing optics. This new optical system provides features including focusing, zoom, field curvature adjustment, and incident angle adjustment. These functions can be realized together or independently depending on the configuration setup of the large aperture lenses. This MIR system is expected to be installed on the EAST tokamak in December 2016, co-located with the Electron Cyclotron Emission Imaging (ECEI) system, to simultaneously measure electron density and temperature fluctuations. This work was supported by U.S. DOE Grant DE-FG02-99ER54531 and by the National MCF energy development program of China.

  18. Performance Projections For The Lithium Tokamak Experiment (LTX)

    SciTech Connect

    Majeski, R.; Berzak, L.; Gray, T.; Kaita, R.; Kozub, T.; Levinton, F.; Lundberg, D. P.; Manickam, J.; Pereverzev, G. V.; Snieckus, K.; Soukhanovskii, V.; Spaleta, J.; Stotler, D.; Strickler, T.; Timberlake, J.; Yoo, J.; Zakharov, L.

    2009-06-17

    Use of a large-area liquid lithium limiter in the CDX-U tokamak produced the largest relative increase (an enhancement factor of 5-10) in Ohmic tokamak confinement ever observed. The confinement results from CDX-U do not agree with existing scaling laws, and cannot easily be projected to the new lithium tokamak experiment (LTX). Numerical simulations of CDX-U low recycling discharges have now been performed with the ASTRA-ESC code with a special reference transport model suitable for a diffusion-based confinement regime, incorporating boundary conditions for nonrecycling walls, with fuelling via edge gas puffing. This model has been successful at reproducing the experimental values of the energy confinement (4-6 ms), loop voltage (<0.5 V), and density for a typical CDX-U lithium discharge. The same transport model has also been used to project the performance of the LTX, in Ohmic operation, or with modest neutral beam injection (NBI). NBI in LTX, with a low recycling wall of liquid lithium, is predicted to result in core electron and ion temperatures of 1-2 keV, and energy confinement times in excess of 50 ms. Finally, the unique design features of LTX are summarized.

  19. Intrinsic momentum transport in up-down asymmetric tokamaks

    NASA Astrophysics Data System (ADS)

    Ball, Justin; Parra, Felix I.; Barnes, Michael; Dorland, William; Hammett, Gregory W.; Rodrigues, Paulo; Loureiro, Nuno F.

    2014-09-01

    Recent work has demonstrated that breaking the up-down symmetry of tokamak flux surfaces removes a constraint that limits intrinsic momentum transport, and hence toroidal rotation, to be small. We show, through MHD analysis, that ellipticity is most effective at introducing up-down asymmetry throughout the plasma. We detail an extension to GS2, a local δf gyrokinetic code that self-consistently calculates momentum transport, to permit up-down asymmetric configurations. Tokamaks with tilted elliptical poloidal cross-sections were simulated to determine nonlinear momentum transport. The results, which are consistent with the experiment in magnitude, suggest that a toroidal velocity gradient, (∂uζi/∂ρ)/vthi, of 5% of the temperature gradient, (∂Ti/∂ρ)/Ti, is sustainable. Here vthi is the ion thermal speed, uζi is the ion toroidal mean flow, ρ is the minor radial coordinate normalized to the tokamak minor radius, and Ti is the ion temperature. Though other known core intrinsic momentum transport mechanisms scale poorly to larger machines, these results indicate that up-down asymmetry may be a feasible method to generate the current experimentally measured rotation levels in reactor-sized devices.

  20. Observation of Pedestal Plasma Turbulence on EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Gao, Xiang; Zhang, Tao; Han, Xiang; Zhang, Shoubiao; Wang, Yumin; Liu, Zixi; Yang, Yao; Liu, Shaocheng; Shi, Nan; Ling, Bili; Li, Jiangang; The EAST Team

    2013-08-01

    Pedestal plasma turbulence was experimentally studied by microwave reflectometry on EAST tokamak. The characteristics of edge pedestal turbulence during dithering L-H transition, ELM-free H-mode phase and inter-ELM phase have recently been studied on EAST. An edge spatial structure of density fluctuation and its dithering temporal evolution is observed for the first time on the EAST tokamak during the L-H transition phase. A coherent mode usually appears during the ELM-free phase prior to the first ELM on EAST tokamak. The mode frequency gradually decreases as the pedestal evolves. Analysis shows that the coherent mode is in the pedestal region inside the separatrix. In plasma with type-III ELMs, a precursor mode before ELM is usually observed. The frequency of the precursor was initially about 150 kHz and gradually decreased till the next ELM. The mode amplitude increases or shows saturation before ELM. In the plasma with compound ELMs composed of high and low frequency ELMs, the precursor was also observed before the high frequency ELM while the harmonic oscillations with frequencies of 20 kHz, 40 kHz and 60 kHz appear before the low frequency ELM.

  1. Inductive flux usage and its optimization in tokamak operation

    DOE PAGES

    Luce, Timothy C.; Humphreys, David A.; Jackson, Gary L.; ...

    2014-07-30

    The energy flow from the poloidal field coils of a tokamak to the electromagnetic and kinetic stored energy of the plasma are considered in the context of optimizing the operation of ITER. The goal is to optimize the flux usage in order to allow the longest possible burn in ITER at the desired conditions to meet the physics objectives (500 MW fusion power with energy gain of 10). A mathematical formulation of the energy flow is derived and applied to experiments in the DIII-D tokamak that simulate the ITER design shape and relevant normalized current and pressure. The rate ofmore » rise of the plasma current was varied, and the fastest stable current rise is found to be the optimum for flux usage in DIII-D. A method to project the results to ITER is formulated. The constraints of the ITER poloidal field coil set yield an optimum at ramp rates slower than the maximum stable rate for plasmas similar to the DIII-D plasmas. Finally, experiments in present-day tokamaks for further optimization of the current rise and validation of the projections are suggested.« less

  2. The D3-D tokamak trouble report database

    NASA Astrophysics Data System (ADS)

    Petersen, P. I.; Miller, S. M.

    1991-11-01

    Operation of the DIII-D tokamak at General Atomics involves many groups which work on the various subsystems. To overview and speed the solution to trouble or problem areas that limit machine availability, a common trouble report system was established. The TROUBLE database automates the recording of trouble reports and eases analysis of problem areas. It contains information on equipment affected, description of problem, cause of problem, solution to problem, and machine downtime (if any). It was created using S1032 from Compuserve Data Technologies and runs on a VAX 8650. The data is used to find the major problem areas so they can be solved and improve the tokamak availability. The data is available to Idaho National Engineering Laboratory (INEL). They are using the data with data from other tokamaks to develop a Fusion Failure Experience Data Collection. Our experience is that a few failures are often the cause of a major part of the downtime. We will discuss these failures and the actions taken to correct them. The data base also will be used to determine the preventive maintenance schedule for different components.

  3. Simulation of MST tokamak discharges with resonant magnetic perturbations

    NASA Astrophysics Data System (ADS)

    Cornille, B. S.; Sovinec, C. R.; Chapman, B. E.; Dubois, A.; McCollam, K. J.; Munaretto, S.

    2016-10-01

    Nonlinear MHD modeling of MST tokamak plasmas with an applied resonant magnetic perturbation (RMP) reveals degradation of flux surfaces that may account for the experimentally observed suppression of runaway electrons with the RMP. Runaway electrons are routinely generated in MST tokamak discharges with low plasma density. When an m = 3 RMP is applied these electrons are strongly suppressed, while an m = 1 RMP of comparable amplitude has little effect. The computations are performed using the NIMROD code and use reconstructed equilibrium states of MST tokamak plasmas with q (0) < 1 and q (a) = 2.2 . Linear computations show that the (1 , 1) -kink and (2 , 2) -tearing modes are unstable, and nonlinear simulations produce sawtoothing with a period of approximately 0.5 ms, which is comparable to the period of MHD activity observed experimentally. Adding an m = 3 RMP in the computation degrades flux surfaces in the outer region of the plasma, while no degradation occurs with an m = 1 RMP. The outer flux surface degradation with the m = 3 RMP, combined with the sawtooth-induced distortion of flux surfaces in the core, may account for the observed suppression of runaway electrons. Work supported by DOE Grant DE-FC02-08ER54975.

  4. The design of the Tokamak Physics Experiment (TPX)

    NASA Astrophysics Data System (ADS)

    Schmidt, J. A.; Thomassen, K. I.; Goldston, R. J.; Neilson, G. H.; Nevins, W. M.; Sinnis, J. C.; Andersen, P.; Bair, W.; Barr, W. L.; Batchelor, D. B.; Baxi, C.; Berg, G.; Bernabei, S.; Bialek, J. M.; Bonoli, P. T.; Boozer, A.; Bowers, D.; Bronner, G.; Brooks, J. N.; Brown, T. G.; Bulmer, R.; Butner, D.; Campbell, R.; Casper, T.; Chaniotakis, E.; Chaplin, M.; Chen, S. J.; Chin, E.; Chrzanowski, J.; Citrolo, J.; Cole, M. J.; Dahlgren, F.; Davis, F. C.; Davis, J.; Davis, S.; Diatchenko, N.; Dinkevich, S.; Feldshteyn, Y.; Felker, B.; Feng, T.; Fenstermacher, M. E.; Fleming, R.; Fogarty, P. J.; Fragetta, W.; Fredd, E.; Gabler, M.; Galambos, J.; Gohar, Y.; Goranson, P. L.; Greenough, N.; Grisham, L. R.; Haines, J.; Haney, S.; Hassenzahl, W.; Heim, J.; Heitzenroeder, P. J.; Hill, D. N.; Hodapp, T.; Houlberg, W. A.; Hubbard, A.; Hyatt, A.; Jackson, M.; Jaeger, E. F.; Jardin, S. C.; Johnson, J.; Jones, G. H.; Juliano, D. R.; Junge, R.; Kalish, M.; Kessel, C. E.; Knutson, D.; LaHaye, R. J.; Lang, D. D.; Langley, R. A.; Liew, S.-L.; Lu, E.; Mantz, H.; Manickam, J.; Mau, T. K.; Medley, S.; Mikkelsen, D. R.; Miller, R.; Monticello, D.; Morgan, D.; Moroz, P.; Motloch, C.; Mueller, J.; Myatt, L.; Nelson, B. E.; Neumeyer, C. L.; Nilson, D.; O'Conner, T.; Pearlstein, L. D.; Peebles, W. A.; Pelovitz, M.; Perkins, F. W.; Perkins, L. J.; Petersen, D.; Pillsbury, R.; Politzer, P. A.; Pomphrey, N.; Porkolab, M.; Posey, A.; Radovinsky, A.; Raftopoulis, S.; Ramakrishnan, S.; Ramos, J.; Rauch, W.; Ravenscroft, D.; Redler, K.; Reiersen, W. T.; Reiman, A.; Reis, E.; Rewoldt, G.; Richards, D. J.; Rocco, R.; Rognlien, T. D.; Ruzic, D.; Sabbagh, S.; Sapp, J.; Sayer, R. O.; Scharer, J. E.; Schmitz, L.; Schnitz, J.; Sevier, L.; Shipley, S. E.; Simmons, R. T.; Slack, D.; Smith, G. R.; Stambaugh, R.; Steill, G.; Stevenson, T.; Stoenescu, S.; Onge, K. T. St.; Stotler, D. P.; Strait, T.; Strickler, D. J.; Swain, D. W.; Tang, W.; Tuszewski, M.; Ulrickson, M. A.; VonHalle, A.; Walker, M. S.; Wang, C.; Wang, P.; Warren, J.; Werley, K. A.; West, W. P.; Williams, F.; Wong, R.; Wright, K.; Wurden, G. A.; Yugo, J. J.; Zakharov, L.; Zbasnik, J.

    1993-09-01

    The Tokamak Physics Experiment is designed to develop the scientific basis for a compact and continuously operating tokamak fusion reactor. It is based on an emerging class of tokamak operating modes, characterized by beta limits well in excess of the Troyon limit, confinement scaling well in excess of H-mode, and bootstrap current fractions approaching unity. Such modes are attainable through the use of advanced, steady state plasma controls including strong shaping, current profile control, and active particle recycling control. Key design features of the TPX are superconducting toroidal and poloidal field coils; actively-cooled plasma-facing components; a flexible heating and current drive system; and a spacious divertor for flexibility. Substantial deuterium plasma operation is made possible with an in-vessel remote maintenance system, a lowactivation titanium vacuum vessel, and shielding of ex-vessel components. The facility will be constructed as a national project with substantial participation by U.S. industry. Operation will begin with first plasma in the year 2000.

  5. Transition to subcritical turbulence in a tokamak plasma

    NASA Astrophysics Data System (ADS)

    van Wyk, F.; Highcock, E. G.; Schekochihin, A. A.; Roach, C. M.; Field, A. R.; Dorland, W.

    2016-12-01

    Tokamak turbulence, driven by the ion-temperature gradient and occurring in the presence of flow shear, is investigated by means of local, ion-scale, electrostatic gyrokinetic simulations (with both kinetic ions and electrons) of the conditions in the outer core of the Mega-Ampere Spherical Tokamak (MAST). A parameter scan in the local values of the ion-temperature gradient and flow shear is performed. It is demonstrated that the experimentally observed state is near the stability threshold and that this stability threshold is nonlinear: sheared turbulence is subcritical, i.e. the system is formally stable to small perturbations, but, given a large enough initial perturbation, it transitions to a turbulent state. A scenario for such a transition is proposed and supported by numerical results: close to threshold, the nonlinear saturated state and the associated anomalous heat transport are dominated by long-lived coherent structures, which drift across the domain, have finite amplitudes, but are not volume filling; as the system is taken away from the threshold into the more unstable regime, the number of these structures increases until they overlap and a more conventional chaotic state emerges. Whereas this appears to represent a new scenario for transition to turbulence in tokamak plasmas, it is reminiscent of the behaviour of other subcritically turbulent systems, e.g. pipe flows and Keplerian magnetorotational accretion flows.

  6. Preconceptual design and assessment of a Tokamak Hybrid Reactor

    SciTech Connect

    Teofilo, V.L.; Leonard, B.R. Jr.; Aase, D.T.

    1980-09-01

    The preconceptual design of a commercial Tokamak Hybrid Reactor (THR) power plant has been performed. The tokamak fusion driver for this hybrid is operated in the ignition mode. The D-T fusion plasma, which produces 1140 MW of power, has a major radius of 5.4 m and a minor radius of 1.0 m with an elongation of 2.0. Double null poloidal divertors are assumed for impurity control. The confining toroidal field is maintained by D-shaped Nb/sub 3/Sn superconducting magnets with a maximum field of 12T at the coil. Three blankets with four associated fuel cycle alternatives have been combined with the ignited tokamak fusion driver. The engineering, material, and balance of plant design requirements for the THR are briefly described. Estimates of the capital, operating and maintenance, and fuel cycle costs have been made for the various driver/blanket combinations and an assessment of the market penetrability of hybrid systems is presented. An analysis has been made of the nonproliferation aspects of the hybrid and its associated fuel cycles relative to fission reactors. The current and required level of technology for both the fusion and fission components of the hybrid system has been reviewed. Licensing hybrid systems is also considered.

  7. The physics design of the Tokamak Physics Experiment

    NASA Astrophysics Data System (ADS)

    Thomassen, K. I.; Batchelor, D. B.; Bialek, J.

    1994-08-01

    The physics approaches to improved, steady-state tokamak reactors, as evolved through reactor design studies, ideas based on experimental results, and better theoretical understanding, are the foundation for the mission and physics design of the Tokamak Physics Experiment (TPX). The mission of TPX is to develop the scientific basis for cost-competitive, continuously operating tokamak power plants. We report here the design status of TPX, a device optimized to achieve improved performance through strong plasma shaping, recycling control, and current profile shaping, while operating continuously. The design incorporates poloidal field flexibility for a wide range of operation in normalized beta and internal inductance, a double-null 'Vee' divertor configuration for power and particle control, internal and external n (ne) 0 coils, as well as passive stabilizers, for control of MHD activity, and remote maintenance for continuous high-power operation in deuterium. Having superconducting poloidal and toroidal coils, the TPX device itself is capable of continuous operation, although initially auxiliary equipment limits the pulse length to 1000 sec.

  8. The design of the Tokamak Physics Experiment (TPX)

    SciTech Connect

    Schmidt, J.A.; Goldston, R.J.; Sinnis, J.C.; Bernabei, S.; Bialek, J.M.; Bronner, G.; Chen, S.J.; Chrzanowski, J.; Citrolo, J.; Dahlgren, F.

    1993-09-01

    The Tokamak Physics Experiment (TPX) is designed to develop the scientific basis for a compact and continuously operating tokamak fusion reactor. It is based on an emerging class of tokamak operating modes, characterized by beta limits well in excess of the Troyon limit, confinement scaling well in excess of H-mode, and bootstrap current fractions approaching unity. Such modes are attainable through the use of advanced, steady state plasma controls including strong shaping, current profile control, and active particle recycling control. Key design features of the TPX are superconducting toroidal and poloidal field coils; actively-cooled plasma-facing components; a flexible heating and current drive system; and a spacious divertor for flexibility. Substantial deuterium plasma operation is made possible with an in-vessel remote maintenance system, a low-activation titanium vacuum vessel, and shielding of ex-vessel components. The facility will be constructed as a national project with substantial participation of US industry. Operation will begin with first plasma in the year 2000.

  9. The physics design of the Tokamak Physics Experiment

    SciTech Connect

    Thomassen, K.I.; Batchelor, D.B.; Bialek, J.

    1994-08-08

    The physics approaches to improved, steady-state tokamak reactors, as evolved through reactor design studies, ideas based on experimental results, and better theoretical understanding, are the foundation for the mission and physics design of the Tokamak Physics Experiment (TPX). The mission of TPX is to develop the scientific basis for cost-competitive, continuously operating tokamak power plants. We report here the design status of TPX, a device optimized to achieve improved performance through strong plasma shaping, recycling control, and current profile shaping, while operating continuously. The design incorporates poloidal field flexibility for a wide range of operation in normalized beta and internal inductance, a double-null ``Vee`` divertor configuration for power and particle control, internal and external n {ne} 0 coils, as well as passive stabilizers, for control of MHD activity, and remote maintenance for continuous high-power operation in deuterium. Having superconducting poloidal and toroidal coils, the TPX device itself is capable of continuous operation, although initially auxiliary equipment limits the pulse length to 1000 sec.

  10. Shape reconstruction of merging spherical tokamak plasma in UTST device

    NASA Astrophysics Data System (ADS)

    Ushiki, Tomohiko; Itagaki, Masafumi; Inomoto, Michiaki

    2016-10-01

    Spherical tokamak (ST) merging method is one of the ST start-up methods which heats the plasma through magnetic reconnection. In the present study reconstruction of eddy current profile and plasma shape was performed during spherical tokamak merging only using external sensor signals by the Cauchy condition surface (CCS) method. CCS method have been implemented for JT-60 (QST), QUEST (Kyushu University), KSTAR (NFRI), RELAX (KIT), and LHD (Nifs). In this method, CCS was assumed inside each plasmas, where both flux function and its normal derivative are unknown. Effect of plasma current was replaced by the boundary condition of CCS, assuming vacuum field everywhere. Also, the nodal points for the boundary integrals of eddy current density were set using quadratic elements in order to express the complicated vacuum vessel shape. Reconstructed profiles of the eddy current and the magnetic flux were well coincided with the reference in each phase of merging process. Magnetic sensor installation plan for UTST was determined from these calculation results. This work was supported by the JSPS A3 Foresight Program ``Innovative Tokamak Plasma Startup and Current Drive in Spherical Torus''.

  11. 3D Equilibrium Reconstruction in Stellarators and Tokamaks with STELLOPT

    NASA Astrophysics Data System (ADS)

    Lazerson, Samuel; Pablant, Novimir; Gates, David; Neilson, Hutch; Nazikian, Raffi; Suzuki, Yasuhiro; Watanabe, Kiyomasa; Ida, Katsumi; Sakakibara, Satoru

    2012-10-01

    The ability to model and predict the behavior of stellarators and tokamaks requires an ability to match simulation parameters with experimental measurements. This process, known as experimental reconstruction, has been used extensively with 2D axisymmetric codes for Tokamaks. These codes, such as EFIT, lack the ability to model the 3D nature of stellarators and the emerging 3D nature of Tokamaks. Phenomena such as, shielding of islands by neoclassical flows and the suppression of edge localized modes through application of 3D fields, highlight the need for such 3D tools. The stellarator optimizer code STELLOPT has been modified to match 3D VMEC equilibria to experimental measurements. This has allowed 3D experimental reconstructions to be preformed on W7-AS, LHD, and DIII-D devices. The free boundary VMEC equilibria are matched to Thomson profiles (ne and Te), charge exchange measurements (Ti), MSE (polarization angle), and magnetic diagnostics (B-probes, flux loops, Rogowski coils). Three dimensional reconstructed equilibria are presented alongside confidence metrics for the reconstruction process.

  12. Inductive flux usage and its optimization in tokamak operation

    SciTech Connect

    Luce, Timothy C.; Humphreys, David A.; Jackson, Gary L.; Solomon, Wayne M.

    2014-07-30

    The energy flow from the poloidal field coils of a tokamak to the electromagnetic and kinetic stored energy of the plasma are considered in the context of optimizing the operation of ITER. The goal is to optimize the flux usage in order to allow the longest possible burn in ITER at the desired conditions to meet the physics objectives (500 MW fusion power with energy gain of 10). A mathematical formulation of the energy flow is derived and applied to experiments in the DIII-D tokamak that simulate the ITER design shape and relevant normalized current and pressure. The rate of rise of the plasma current was varied, and the fastest stable current rise is found to be the optimum for flux usage in DIII-D. A method to project the results to ITER is formulated. The constraints of the ITER poloidal field coil set yield an optimum at ramp rates slower than the maximum stable rate for plasmas similar to the DIII-D plasmas. Finally, experiments in present-day tokamaks for further optimization of the current rise and validation of the projections are suggested.

  13. Reduced MHD Equations For Low Aspect Ratio Tokamaks

    NASA Astrophysics Data System (ADS)

    Callen, J. D.; Hegna, C. C.; Kruger, S. E.

    1997-11-01

    The usual derivations [1] of reduced MHD equations for describing tokamak plasmas use a large aspect ratio expansion to remove, to lowest order, the compressional Alfven wave response that enforces the axisymmetric ideal MHD (Grad-Shafranov) equilibrium. For very low aspect ratio tokamaks such an approach is invalid, even though [2] the radially localized compressional Alfven waves that enforce ideal MHD equilibrium still have higher frequencies than the shear Alfven waves that appear in reduced MHD descriptions. We are beginning to explore and will discuss a multiple time scale approach that does not explicitly require a large aspect ratio expansion in order to develop a reduced MHD description appropriate for low aspect ratio tokamak plasmas. The relationship of this approach to geometric-properties-based formulations of the ideal MHD energy principle [3] will also be discussed. [1] H.R. Strauss, Phys. Fluids 19, 134 (1976); 20, 1354 (1977). [2] R.D. Hazeltine and J.D. Meiss, Plasma Confinement (Addison-Wesley, Redwood City, CA, 1992), Chapter 7. [3] R.L. Dewar, D.A. Monticello, W.N.-C. Sy, Phys. Fluids 27, 1723 (1984); J.M. Greene, Phys. Plasmas 3, 8(1996).

  14. Dust-Particle Transport in Tokamak Edge Plasmas

    SciTech Connect

    Pigarov, A Y; Krasheninnikov, S I; Soboleva, T K; Rognlien, T D

    2005-09-12

    Dust particulates in the size range of 10nm-100{micro}m are found in all fusion devices. Such dust can be generated during tokamak operation due to strong plasma/material-surface interactions. Some recent experiments and theoretical estimates indicate that dust particles can provide an important source of impurities in the tokamak plasma. Moreover, dust can be a serious threat to the safety of next-step fusion devices. In this paper, recent experimental observations on dust in fusion devices are reviewed. A physical model for dust transport simulation, and a newly developed code DUSTT, are discussed. The DUSTT code incorporates both dust dynamics due to comprehensive dust-plasma interactions as well as the effects of dust heating, charging, and evaporation. The code tracks test dust particles in realistic plasma backgrounds as provided by edge-plasma transport codes. Results are presented for dust transport in current and next-step tokamaks. The effect of dust on divertor plasma profiles and core plasma contamination is examined.

  15. Mirnov oscillation analysis in IR-T1 tokamak

    SciTech Connect

    Ghoranneviss, M.; Khademian, A.

    1996-12-31

    Tokamak discharges are usually rather turbulent with a large spectrum of electric and magnetic fluctuations. Mirnov oscillations are caused by rotating magnetic island inside the plasma column originated by resistive instabilities. Depending on the size of the plasma column, the frequency spectrum of Mirnov oscillation is in the range from a few to tens of kHz. The authors employ the technique to analyze signals measured in the IR-T1 tokamak without and with resonant helical field (RHF). The time-resolved analysis just described applies to the time series of the signal produced by each Mirnov pick-up coil. They see that the resonant helical field has almost no influence on the plasma current and loop voltage and there is a slight decrease of the floating potential at plasma edge. The characteristic frequency of poloidal propagation of the magnetohydrodynamic (MHD) fluctuations can be determined by using the correlation techniques described. For this calculation they have used the signals from the coils located on vacuum chamber with low magnetic field because they are better correlated than the one from the coils in the high field side. They have shown that time-resolved spectral analysis can be easily applied to analyze the (MHD) oscillations in tokamak.

  16. Analysis of neutral hydrogenic emission spectra in a tokamak

    NASA Astrophysics Data System (ADS)

    Ko, J.; Chung, J.; Jaspers, R. J. E.

    2015-10-01

    Balmer-α radiation by the excitation of thermal and fast neutral hydrogenic particles has been investigated in a magnetically confined fusion device, or tokamak, from the Korea Superconducting Tokamak Advanced Research (KSTAR). From the diagnostic point of view, the emission from thermal neutrals is associated with passive spectroscopy and that from energetic neutrals that are usually injected from the outside of the tokamak to the active spectroscopy. The passive spectroscopic measurement for the thermal Balmer-α emission from deuterium and hydrogen estimates the relative concentration of hydrogen in a deuterium-fueled plasma and therefore, makes a useful tool to monitor the vacuum wall condition. The ratio of hydrogen to deuterium obtained from this measurement qualitatively correlates with the energy confinement of the plasma. The Doppler-shifted Balmer-α components from the fast neutrals features the spectrum of the motional Stark effect (MSE) which is an essential principle for the measurement of the magnetic pitch angle profile. Characterization of this active MSE spectra, especially with multiple neutral beam lines crossing along the observation line of sight, has been done for the guideline of the multi-ion-source heating beam operation and for the optimization of the narrow bandpass filters that are required for the polarimeter-based MSE diagnostic system under construction at KSTAR.

  17. Non-Axisymmetric Shaping of Tokamaks Preserving Quasi-Axisymmetry

    SciTech Connect

    Long-Poe Ku and Allen H. Boozer

    2009-06-05

    If quasi-axisymmetry is preserved, non-axisymmetric shaping can be used to design tokamaks that do not require current drive, are resilient to disruptions, and have robust plasma stability without feedback. Suggestions for addressing the critical issues of tokamaks can only be validated when presented with sufficient specificity that validating experiments can be designed. The purpose of this paper is provide that specificity for non-axisymmetric shaping. To our knowledge, no other suggestions for the solution of a number of tokamak issues, such as disruptions, have reached this level of specificity. Sequences of three-field-period quasi-axisymmetric plasmas are studied. These sequences address the questions: (1) What can be achieved at various levels of non-axisymmetric shaping? (2) What simplifications to the coils can be achieved by going to a larger aspect ratio? (3) What range of shaping can be achieved in a single experimental facility? The sequences of plasmas found in this study provide a set of interesting and potentially important configurations.

  18. Economic analyses of alpha channeling in tokamak power plants.

    SciTech Connect

    Ehst, D.A.

    1998-09-17

    The hot-ion-mode of operation [1] has long been thought to offer optimized performance for long-pulse or steady-state magnetic fusion power plants. This concept was revived in recent years when theoretical considerations suggested that nonthermal fusion alpha particles could be made to channel their power density preferentially to the fuel ions [2,3]. This so-called anomalous alpha particle slowing down can create plasmas with fuel ion temperate T{sub i} somewhat larger than the electron temperature T{sub e}, which puts more of the beta-limited plasma pressure into the useful fuel species (rather than non-reacting electrons). As we show here, this perceived benefit may be negligible or nonexistent for tokamaks with steady state current drive. It has likewise been argued [2,3] that alpha channeling could be arranged such that little or no external power would be needed to generate the steady state toroidal current. Under optimistic assumptions we show that such alpha-channeling current drive would moderately improve the economic performance of a first stability tokamak like ARIES-I [4], however a reversed-shear (advanced equilibrium) tokamak would likely not benefit since traditional radio-wave (rf) electron-heating current drive power would already be quite small.

  19. Probe diagnostics in the far scrape-off layer plasma of Korea Superconducting Tokamak Advanced Research tokamak using a sideband harmonic method.

    PubMed

    Kim, Dong-Hwan; Hong, Suk-Ho; Park, Il-Seo; Lee, Hyo-Chang; Kang, Hyun-Ju; Chung, Chin-Wook

    2015-12-01

    Plasma characteristics in the far scrape-off layer region of tokamak play a crucial role in the stable plasma operation and its sustainability. Due to the huge facility, electrical diagnostic systems to measure plasma properties have extremely long cable length resulting in large stray current. To overcome this problem, a sideband harmonic method was applied to the Korea Superconducting Tokamak Advanced Research tokamak plasma. The sideband method allows the measurement of the electron temperature and the plasma density without the effect of the stray current. The measured plasma densities are compared with those from the interferometer, and the results show reliability of the method.

  20. Probe diagnostics in the far scrape-off layer plasma of Korea Superconducting Tokamak Advanced Research tokamak using a sideband harmonic method

    SciTech Connect

    Kim, Dong-Hwan; Hong, Suk-Ho; Park, Il-Seo; Lee, Hyo-Chang; Kang, Hyun-Ju; Chung, Chin-Wook

    2015-12-15

    Plasma characteristics in the far scrape-off layer region of tokamak play a crucial role in the stable plasma operation and its sustainability. Due to the huge facility, electrical diagnostic systems to measure plasma properties have extremely long cable length resulting in large stray current. To overcome this problem, a sideband harmonic method was applied to the Korea Superconducting Tokamak Advanced Research tokamak plasma. The sideband method allows the measurement of the electron temperature and the plasma density without the effect of the stray current. The measured plasma densities are compared with those from the interferometer, and the results show reliability of the method.

  1. High power heating of magnetic reconnection in merging tokamak experiments

    SciTech Connect

    Ono, Y.; Tanabe, H.; Gi, K.; Watanabe, T.; Ii, T.; Yamada, T.; Gryaznevich, M.; Scannell, R.; Conway, N.; Crowley, B.; Michael, C.

    2015-05-15

    Significant ion/electron heating of magnetic reconnection up to 1.2 keV was documented in two spherical tokamak plasma merging experiment on MAST with the significantly large Reynolds number R∼10{sup 5}. Measured 1D/2D contours of ion and electron temperatures reveal clearly energy-conversion mechanisms of magnetic reconnection: huge outflow heating of ions in the downstream and localized heating of electrons at the X-point. Ions are accelerated up to the order of poloidal Alfven speed in the reconnection outflow region and are thermalized by fast shock-like density pileups formed in the downstreams, in agreement with recent solar satellite observations and PIC simulation results. The magnetic reconnection efficiently converts the reconnecting (poloidal) magnetic energy mostly into ion thermal energy through the outflow, causing the reconnection heating energy proportional to square of the reconnecting (poloidal) magnetic field B{sub rec}{sup 2}  ∼  B{sub p}{sup 2}. The guide toroidal field B{sub t} does not affect the bulk heating of ions and electrons, probably because the reconnection/outflow speeds are determined mostly by the external driven inflow by the help of another fast reconnection mechanism: intermittent sheet ejection. The localized electron heating at the X-point increases sharply with the guide toroidal field B{sub t}, probably because the toroidal field increases electron confinement and acceleration length along the X-line. 2D measurements of magnetic field and temperatures in the TS-3 tokamak merging experiment also reveal the detailed reconnection heating mechanisms mentioned above. The high-power heating of tokamak merging is useful not only for laboratory study of reconnection but also for economical startup and heating of tokamak plasmas. The MAST/TS-3 tokamak merging with B{sub p} > 0.4 T will enables us to heat the plasma to the alpha heating regime: T{sub i} > 5 keV without using any additional heating facility.

  2. TSC simulation of feedback stabilization of axisymmetric modes in tokamaks using driven halo currents

    SciTech Connect

    Jardin, S.C.; Schmidt, J.A.

    1997-03-01

    The Tokamak Simulation Code (TSC) has been used to model a new method of feedback stabilization of the axisymmetric instability in tokamaks using driven halo (or scrapeoff layer) currents. The method appears to be feasible for a wide range of plasma edge parameters. It may offer significant advantages over the more conventional method of controlling this instability when applied in a reactor environment.

  3. Millimeter wave tokamak heating and current drive with a high power free electron laser

    SciTech Connect

    Thomassen, K.I.

    1987-01-01

    Experiments on microwave generation using a free electron laser (FEL) have shown this to be an efficient way to generate millimeter wave power in short, intense pulses. Short pulse FEL's have several advantages that make them attractive for application to ECR heating of tokamak fusion reactors. This paper reports on plans made to demonstrate the technology at the Microwave Tokamak Experiment (MTX) Facility.

  4. Proposals for an influential role of small tokamaks in mainstream fusion physics and technology research

    SciTech Connect

    Oost, G. van; Bosco, E. del; Gryaznevich, M. P.

    2006-12-04

    Small tokamaks may significantly contribute to the better understanding of phenomena in a wide range of fields such as plasma confinement and energy transport; plasma stability in different magnetic configurations; plasma turbulence and its impact on local and global plasma parameters; processes at the plasma edge and plasma-wall interaction; scenarios of additional heating and non-inductive current drive; new methods of plasma profile and parameter control; development of novel plasma diagnostics; benchmarking of new numerical codes and so on. Furthermore, due to the compactness, flexibility, low operation costs and high skill of their personnel small tokamaks are very convenient to develop and test new materials and technologies, which because of the risky nature cannot be done in large machines without preliminary studies. Small tokamaks are suitable and important for broad international cooperation, providing the necessary environment and manpower to conduct dedicated joint research programmes. In addition, the experimental work on small tokamaks is very appropriate for the education of students, scientific activities of post-graduate students and for the training of personnel for large tokamaks. All these tasks are well recognised and reflected in documents and understood by the large tokamak teams. Recent experimental results will be presented of contributions to mainstream fusion physics and technology research on small tokamaks involved in the IAEA Coordinated Research Project 'Joint Research using small tokamaks', started in 2004.

  5. Operating points and feedback control of plasma characteristics in tokamaks with full current drive

    SciTech Connect

    Swain, D.W.; Attenberger, S.E.; Houlberg, W.A.; Bonoli, P.T.; Nevins, W.M.

    1994-12-31

    Tokamak operation using advanced tokamak modes with steady-state current drive may provide better performance, thereby improving the prospects of power-producing fusion reactors. Scenarios for such operation in TPX and in an ITER-like scale-up of TPX are modeled. Results indicate that the heating and current drive power and feedback control requirements may be achievable.

  6. Transport simulations of ohmic pellet experiments on the TFTR, ASDEX, and ALCATOR-C tokamaks

    SciTech Connect

    Redi, M.H.; Tang, W.M.; Owens, D.K.; Greenwald, M.; Gruber, O.; Kaufmann, M.

    1988-07-01

    Transport simulations of ohmic gas-fuelled and pellet-fuelled experiments have been carried out to test a microinstability-based, profile-consistent model of anomalous transport in tokamaks. Predictions for experiments on the TFTR, ASDEX, and ALCATOR-C tokamaks were found consistent with the observed confinement and temperature measurements. 26 refs., 11 figs., 10 tabs.

  7. The Discharge Design of HL-2M with the Tokamak Simulation Code (TSC)

    SciTech Connect

    Yudong Pan, S.C. Jardin, and C. Kes

    2007-10-10

    We present results on the discharge design of the HL-2M tokamak, which is to be an upgrade to the existing HL-2A tokamak. We present simulation results for complete 5-sec. discharges, both double null and lower single null, for both ohmic and auxiliary heated discharges. We also discuss the vertical stability properties of the device. __________________________________________________

  8. Adaptive feedback control of wall modes in tokamaks

    NASA Astrophysics Data System (ADS)

    Sun, Zhipeng

    The goal of this study is to stabilize the resistive wall modes (RWM) in tokamaks with adaptive stochastic feedback control. This is the first ever attempt at adaptive stochastic feedback optimal control of RWM in tokamaks. Both adaptive optimal state feedback and adaptive output feedback control have been studied. The adaptive optimal state feedback control design successfully stabilizes a slowly time-evolving RWM in a tokamak in a time scale of 4 times the inverse of the growth rate of the RWM. The stabilized system output for the time-invariant model is twice the system noise level. For the time-varying model, it is several times larger than the time-invariant case. The adaptive stochastic output feedback can also stabilize the slowly time-evolving RWM. It can do this in a time about 3 times that of the inverse of the growth rate of the RWM. The stabilized system output is twice as large as that of the state feedback case. In order to avoid the bottleneck encountered in the various sequential computations with big matrices in the feedback algorithms, neural network control has been proposed. It has been used to implement the adaptive stochastic output feedback control. It can stabilize the RWM instability in a time of 3 times the inverse of the growth rate of the RWM. The stabilized wall modes have the steady state output similar to the output feedback case. The developed algorithms, state feedback, output feedback, neural network control, can be readily applied to other plasma instabilities.

  9. MHD Effects of a Ferritic Wall on Tokamak Plasmas

    NASA Astrophysics Data System (ADS)

    Hughes, Paul E.

    It has been recognized for some time that the very high fluence of fast (14.1MeV) neutrons produced by deuterium-tritium fusion will represent a major materials challenge for the development of next-generation fusion energy projects such as a fusion component test facility and demonstration fusion power reactor. The best-understood and most promising solutions presently available are a family of low-activation steels originally developed for use in fission reactors, but the ferromagnetic properties of these steels represent a danger to plasma confinement through enhancement of magnetohydrodynamic instabilities and increased susceptibility to error fields. At present, experimental research into the effects of ferromagnetic materials on MHD stability in toroidal geometry has been confined to demonstrating that it is still possible to operate an advanced tokamak in the presence of ferromagnetic components. In order to better quantify the effects of ferromagnetic materials on tokamak plasma stability, a new ferritic wall has been installated in the High Beta Tokamak---Extended Pulse (HBT-EP) device. The development, assembly, installation, and testing of this wall as a modular upgrade is described, and the effect of the wall on machine performance is characterized. Comparative studies of plasma dynamics with the ferritic wall close-fitting against similar plasmas with the ferritic wall retracted demonstrate substantial effects on plasma stability. Resonant magnetic perturbations (RMPs) are applied, demonstrating a 50% increase in n = 1 plasma response amplitude when the ferritic wall is near the plasma. Susceptibility of plasmas to disruption events increases by a factor of 2 or more with the ferritic wall inserted, as disruptions are observed earlier with greater frequency. Growth rates of external kink instabilities are observed to be twice as large in the presence of a close-fitting ferritic wall. Initial studies are made of the influence of mode rotation frequency

  10. Geodesic acoustic mode in tokamaks: local consideration and eigenvalue analysis

    NASA Astrophysics Data System (ADS)

    Kolesnichenko, Ya I.; Lepiavko, B. S.; Lutsenko, V. V.

    2013-12-01

    A set of magnetohydrodynamic equations describing the geodesic acoustic mode (GAM) in tokamak plasmas is derived. The obtained equations take into account the presence of the energetic ions and allow to study energetic-ion-driven GAM instability perturbatively or non-perturbatively (EGAM mode). They are applicable to plasmas with \\bar{\\beta} q^2 \\lesssim 1 , where \\bar{\\beta} =\\beta_s/(1+\\beta_s) , \\beta_s=c_s^2/v_A^2 , cs is the sound velocity, vA is the Alfvén velocity, q is the tokamak safety factor. Using these equations, GAM/EGAM instability is studied in a local approach and by means of the eigenvalue analysis. It is shown that β-coupling (the coupling of Fourier harmonics of the perturbation due to finite β—ratio of the plasma pressure to the magnetic field pressure—and the curvature of the field lines) can be responsible for the radial structure of the GAM-mode. A conclusion is drawn that conditions for the GAM/EGAM instability to arise are mildest in the case of counter-injection of energetic ions with pitch angles χ2 < 0.6 and large ratio of Larmor radius of the energetic ions to a characteristic length of inhomogeneity of these ions. A numerical code solving the derived equations is developed. Specific calculations are carried out for tokamaks with a non-monotonic safety factor. On the other hand, it is found that due to the presence of the energetic ions the GAM/EGAM continuum can have an extremum even when the safety factor q(r) is monotonic, which indicates that global modes can exist also in this case.

  11. A charged fusion product diagnostic for a spherical tokamak

    NASA Astrophysics Data System (ADS)

    Perez, Ramona Leticia Valenzuela

    Designs for future nuclear fusion power reactors rely on the ability to create a stable plasma (hot ionized gas of hydrogen isotopes) as a medium with which to sustain nuclear fusion reactions. My dissertation work involves designing, constructing, testing, installing, operating, and validating a new diagnostic for spherical tokamaks, a type of reactor test facility. Through detecting charged particles emitted from the plasma, this instrument can be used to study fusion reaction rates within the plasma and how they are affected by plasma perturbations. Quantitatively assessing nuclear fusion reaction rates at specific locations inside the plasma and as a function of time can provide valuable data that can be used to evaluate theory-based simulations related to energy transport and plasma stability. The Proton Detector (PD), installed in the Mega Amp Spherical Tokamak (MAST) at the Culham Centre for Fusion Energy (CCFE) in Abingdon, England, was the first instrument to experimentally detect 3 MeV Protons and 1 MeV Tritons created from deuterium- deuterium (hydrogen isotopes) nuclear fusion reactions inside a spherical tokamak's plasma. The PD consists of an array of particle detectors with a protective housing and the necessary signal conditioning electronics and readout. After several years of designing (which included simulations for detector orientations), fabricating, and testing the PD, it was installed in MAST and data were collected over a period of two months in the summer of 2013. Proton and triton rates as high as 200 kHz were measured and an initial radial profile of these fusion reaction rates inside the plasma was extracted. These results will be compared to a complementary instrument at MAST as well as theory-based simulations and form the knowledge basis for developing a larger future instrument. The design and performance of all instrument components (electrical, computational, mechanical), and subsequent data analysis methods and results are

  12. Magneto-hydro-dynamic limits in spherical tokamaks

    NASA Astrophysics Data System (ADS)

    Hender, T. C.; Allfrey, S. J.; Akers, R.; Appel, L. C.; Bevir, M. K.; Buttery, R. J.; Gryaznevich, M.; Jenkins, I.; Kwon, O. J.; McClements, K. G.; Martin, R.; Medvedev, S.; Nightingale, M. P. S.; Ribeiro, C.; Roach, C. M.; Robinson, D. C.; Sharapov, S. E.; Sykes, A.; Villard, L.; Walsh, M. J.

    1999-05-01

    The operational limits observed in spherical tokamaks, notably the small tight aspect ratio tokamak (START) device [A. Sykes et al., Nucl. Fusion 32, 694 (1992)], are consistent with those found in conventional aspect ratio tokamaks. In particular the highest β achieved (˜40%) is consistent with an ideal magneto-hydro-dynamic (MHD) Troyon type limit, the upper limit on density is well described by the Greenwald density (πa2n¯e/Ip˜1) and the normalized current (Ip/aBt) is limited such that q95≳2. Stability calculations indicate scope for increasing both normalized β and normalized current beyond the values so far achieved, although wall stabilization is generally needed for low-n modes. In double null configurations current terminating disruptions occur at each of the operational boundaries, though the current quench tends to be slow at the density limit and disruptions at high β may be due to the low q. In early limiter START discharges, before the divertor coils were installed, disruptions rarely occurred. Instead internal reconnection events which have all the characteristics of a disruption except the current quench occurred. These various disruptive behaviors are explained in terms of a model in which helicity is conserved during the disruption. Due to the low toroidal field beam ions in START, and α particles in a ST power plant, are super-Alfvénic. This gives the possibility for toroidal Alfvén eigenmodes (TAEs) to occur and such modes are frequently observed in START neutral beam injection (NBI) discharges, but seem to be benign. The features of these observed TAEs are shown to be in agreement with MHD calculations.

  13. Tritium Experience in Large Tokamaks: Application to ITER

    SciTech Connect

    Skinner, C.H.; Gentile, C.; Hosea, J.; Mueller, D; Gentile, C.; Federici, G.; Haanges, R.

    1998-05-01

    Recent experience with the use of tritium fuel in the Tokamak Fusion Test Reactor and the Joint European Torus, together with progress in developing the technical design of the International Thermonuclear Experimental Reactor has expanded the technical knowledge base for tritium issues in fusion. This paper reports on an IEA workshop that brought together scientists and engineers to share experience and expertise on all fusion-related tritium issues. Extensive discussion periods were devoted to exploring outstanding issues and identifying potential R{ampersand}D avenues to address them. This paper summarizes the presentations, discussions, and recommendations.

  14. Turbulence studies in Tokamak boundary plasmas with realistic divertor geometry

    SciTech Connect

    Xu, X.Q.

    1998-10-14

    Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT [1] and the linearized shooting code BAL[2] to study turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant, resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the ExB drift speed, ion diamagnetism and finite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters.

  15. Continuum kinetic modeling of the tokamak plasma edge

    SciTech Connect

    Dorf, M. A.; Dorr, M.; Rognlien, T.; Hittinger, J.; Cohen, R.

    2016-03-10

    In this study, the first 4D (axisymmetric) high-order continuum gyrokinetic transport simulations that span the magnetic separatrix of a tokamak are presented. The modeling is performed with the COGENT code, which is distinguished by fourth-order finite-volume discretization combined with mapped multiblock grid technology to handle the strong anisotropy of plasmatransport and the complex X-point divertor geometry with high accuracy. The calculations take into account the effects of fully nonlinear Fokker-Plank collisions, electrostatic potential variations, and anomalous radial transport. Topics discussed include: (a) ion orbit loss and the associated toroidal rotation and (b) edge plasma relaxation in the presence of anomalous radial transport.

  16. Nonlinear tearing instabilities in tokamaks with locally flattened current profiles

    SciTech Connect

    Reiman, A.H.

    1988-07-01

    Nonlinear tearing stability is evaluated for current profiles which are linearly stabilized by flattening the current in the neighborhood of the rational surface. When marginally stable to the linear instability, these profiles remain unstable in the presence of a small but finite island. The growth of the island saturated only when the island reaches the width it would have attained in the absence of flattening. Implications are discused for proposed methods of tearing mode stabilization and for theories of the tokamak sawtooth oscillation. 19 refs., 1 fig.

  17. Tritium experience in the Tokamak Fusion Test Reactor

    SciTech Connect

    Skinner, C.H.; Blanchard, W.; Hosea, J.; Mueller, D.; Nagy, A.; Brooks, J.N.; Hogan, J.

    1998-07-01

    Tritium management is a key enabling element in fusion technology. Tritium fuel was used in 3.5 years of successful deuterium-tritium (D-T) operations in the Tokamak Fusion Test Reactor (TFTR) at the Princeton Plasma Physics Laboratory. The D-T campaign enabled TFTR to explore the transport, alpha physics, and MHD stability of a reactor core. It also provided experience with tritium retention and removal that highlighted the importance of these issues in future D-T machines. In this paper, the authors summarize the tritium retention and removal experience in TFTR and its implications for future reactors.

  18. Tokamak Transmutation of (nuclear) Waste (TTW): Parametric studies

    NASA Astrophysics Data System (ADS)

    Cheng, E. T.; Krakowski, R. A.; Peng, Y. K. M.

    Radioactive waste generated as part of the commercial-power and defense nuclear programs can be either stored or transmuted. The latter treatment requires a capital-intensive neutron source and is reserved for particularly hazardous and long-lived actinide and fission-product waste. A comparative description of fusion-based transmutation is made on the basis of rudimentary estimates of ergonic performance and transmutation capacities versus inventories for both ultra-low aspect-ratio (spherical torus, ST) and conversional (aspect-ratio) tokamak fusion-power-core drivers. The parametric systems studies reported herein provides a preamble to more-detailed, cost-based systems analyses.

  19. Radiation−condensation instability in tokamaks with mixed impurities

    SciTech Connect

    Morozov, D. Kh.; Pshenov, A. A.

    2015-08-15

    Radiation−condensation instability (RCI) is one of the possible mechanisms behind the formation of microfaceted asymmetric radiation from the edge (MARFE) of a tokamak. It has been previously shown by the authors that RCI in carbon-seeded plasma can be stabilized using neon injection. Recently, beryllium- and tungsten-seeded plasmas became a subject of great interest. Therefore, in the present paper, RCI stability analysis of the edge plasma seeded with beryllium, tungsten, nitrogen, and carbon is performed. The influence of neutral hydrogen fluxes from the wall on the marginal stability limit is studied as well.

  20. Noninductively Driven Tokamak Plasmas at Near-Unity Toroidal Beta

    NASA Astrophysics Data System (ADS)

    Schlossberg, D. J.; Bodner, G. M.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Perry, J. M.; Reusch, J. A.

    2017-07-01

    Access to and characterization of sustained, toroidally confined plasmas with a very high plasma-to-magnetic pressure ratio (βt ), low internal inductance, high elongation, and nonsolenoidal current drive is a central goal of present tokamak plasma research. Stable access to this desirable parameter space is demonstrated in plasmas with ultralow aspect ratio and high elongation. Local helicity injection provides nonsolenoidal sustainment, low internal inductance, and ion heating. Equilibrium analyses indicate βt up to ˜100 % with a minimum |B | well spanning up to ˜50 % of the plasma volume.

  1. Noninductively Driven Tokamak Plasmas at Near-Unity Toroidal Beta

    DOE PAGES

    Schlossberg, David J.; Bodner, Grant M.; Bongard, Michael W.; ...

    2017-07-01

    Access to and characterization of sustained, toroidally confined plasmas with a very high plasma-to-magnetic pressure ratio (βt), low internal inductance, high elongation, and nonsolenoidal current drive is a central goal of present tokamak plasma research. Stable access to this desirable parameter space is demonstrated in plasmas with ultralow aspect ratio and high elongation. Local helicity injection provides nonsolenoidal sustainment, low internal inductance, and ion heating. Equilibrium analyses indicate βt up to ~100% with a minimum |B| well spanning up to ~50% of the plasma volume.

  2. Evidence of inward toroidal momentum convection in the JET tokamak.

    PubMed

    Tala, T; Zastrow, K-D; Ferreira, J; Mantica, P; Naulin, V; Peeters, A G; Tardini, G; Brix, M; Corrigan, G; Giroud, C; Strintzi, D

    2009-02-20

    Experiments have been carried out on the Joint European Torus tokamak to determine the diffusive and convective momentum transport. Torque, injected by neutral beams, was modulated to create a periodic perturbation in the toroidal rotation velocity. Novel transport analysis shows the magnitude and profile shape of the momentum diffusivity are similar to those of the ion heat diffusivity. A significant inward momentum pinch, up to 20 m/s, has been found. Both results are consistent with gyrokinetic simulations. This evidence is complemented in plasmas with internal transport barriers.

  3. Halo current diagnostic system of experimental advanced superconducting tokamak

    SciTech Connect

    Chen, D. L.; Shen, B.; Sun, Y.; Qian, J. P. Wang, Y.; Xiao, B. J.; Granetz, R. S.

    2015-10-15

    The design, calibration, and installation of disruption halo current sensors for the Experimental Advanced Superconducting Tokamak are described in this article. All the sensors are Rogowski coils that surround conducting structures, and all the signals are analog integrated. Coils with two different cross-section sizes have been fabricated, and their mutual inductances are calibrated. Sensors have been installed to measure halo currents in several different parts of both the upper divertor (tungsten) and lower divertor (graphite) at several toroidal locations. Initial measurements from disruptions show that the halo current diagnostics are working well.

  4. Enhancement of the Bootstrap Current in a Tokamak Pedestal

    SciTech Connect

    Kagan, Grigory; Catto, Peter J.

    2010-07-23

    The strong radial electric field in a subsonic tokamak pedestal modifies the neoclassical ion parallel flow velocity, as well as the radial ion heat flux. Existing experimental evidence of the resulting alteration in the poloidal flow of a trace impurity is discussed. We then demonstrate that the modified parallel ion flow can noticeably enhance the pedestal bootstrap current when the background ions are in the banana regime. Only the coefficient of the ion temperature gradient drive term is affected. The revised expression for the pedestal bootstrap current is presented. The prescription for inserting the modification into any existing banana regime bootstrap current expression is given.

  5. Neutral pumping rates for a next step tokamak ignition device

    SciTech Connect

    Galambos, J.D.; Peng, Y.K.M.; Heifetz, D.

    1985-01-01

    Neutral pumping rates are calculated for pump-limiter and divertor options of a next step tokamak ignition device using a method that accounts for the coupled effects of neutral transport and plasma transport. For both pump limiters and divertors the plasma flow into the channel surrounding the neutralizer plate is greatly reduced by the neutral recycling. The fraction of this flow that is pumped can be large (>50%) but in general is dependent on the particular geometry and plasma conditions. It is estimated that pumping speeds greater than or approximately 10/sup 5/ L/s are adequate for the exhaust requirements in the pump-limiter and the divertor cases.

  6. Deuterium and tritium separation in a tokamak reactor divertor layer

    NASA Astrophysics Data System (ADS)

    Tokar', M. Z.

    1989-04-01

    It's shown that the plasma isotope composition in a tokamak reactor divertor layer changes along the magnetic field and can notable differ from the gas composition in a pumping chamber. Heavier tritium must concentrate in the hot plasma far from the divertor plate due to thermal force stipulated by mutial collisions of deuterium and tritium ions. This circumstance is favourable from the point of view of tritium cycle optimization and must facilitate solution of the problem of tritium accumulation in the reactor construction elements.

  7. Resonant magnetic perturbations and edge ergodization on the COMPASS tokamak

    SciTech Connect

    Cahyna, P.; Fuchs, V.; Krlin, L.

    2008-09-15

    Results of calculations of resonant magnetic perturbation spectra on the COMPASS tokamak are presented. Spectra of the perturbations are calculated from the vacuum field of the perturbation coils. Ergodization is then estimated by applying the criterion of overlap of the resulting islands and verified by field line tracing. Results show that for the chosen configuration of perturbation coils an ergodic layer appears in the pedestal region. The ability to form an ergodic layer is similar to the theoretical results for the ELM suppression experiment at DIII-D; thus, a comparable effect on ELMs can be expected.

  8. Activation of building air in a Tokamak Engineering Test Facility

    SciTech Connect

    Leonard, B.R. Jr.; Perry, R.T.

    1980-09-01

    The production of radionuclides by neutron reactions in the building air of a conceptual Tokamak Engineering Test Facility has been calculated. The short-lived radionuclides /sup 13/N, /sup 16/N and /sup 41/Ar are all found to greatly exceed their maximum permissable concentration values. Longer-lived radionuclides /sup 3/H, /sup 14/C and /sup 39/Ar are also found to be produced in significant concentrations. The present results are compared with values calculated for three other fusion devices; TFTR, INS, and FMIT. These comparisons show that the ETF can be a prolific producer of activated air.

  9. NASTRAN analysis of Tokamak vacuum vessel using interactive graphics

    NASA Technical Reports Server (NTRS)

    Miller, A.; Badrian, M.

    1978-01-01

    Isoparametric quadrilateral and triangular elements were used to represent the vacuum vessel shell structure. For toroidally symmetric loadings, MPCs were employed across model boundaries and rigid format 24 was invoked. Nonsymmetric loadings required the use of the cyclic symmetry analysis available with rigid format 49. NASTRAN served as an important analysis tool in the Tokamak design effort by providing a reliable means for assessing structural integrity. Interactive graphics were employed in the finite element model generation and in the post-processing of results. It was felt that model generation and checkout with interactive graphics reduced the modelling effort and debugging man-hours significantly.

  10. Tokamak with liquid metal for inducing toroidal electrical field

    DOEpatents

    Ohkawa, Tihiro

    1981-01-01

    A tokamak apparatus includes a vessel for defining a reservoir and confining liquid therein. A toroidal liner disposed within said vessel defines a toroidal space within the liner confines gas therein. Liquid metal fills the reservoir outside the liner. A magnetic field is established in the liquid metal to develop magnetic flux linking the toroidal space. The gas is ionized. The liquid metal and the toroidal space are moved relative to one another transversely of the space to generate electric current in the ionized gas in the toroidal space about its major axis and thereby heat plasma developed in the toroidal space.

  11. Tokamak with mechanical compression of toroidal magnetic field

    DOEpatents

    Ohkawa, Tihiro

    1981-01-01

    A tokamak apparatus includes a pressure vessel for defining a reservoir and confining liquid therein. A collapsible toroidal liner disposed within the pressure vessel defines a toroidal space within the liner. Liquid metal fills the reservoir outside said liner. A toroidal magnetic field is developed within the toroidal space about the major axis thereof. A toroidal plasma is developed within the toroidal space about the major axis thereof. Pressure is applied to the liquid metal to collapse the liner and reduce the volume of the toroidal space, thereby increasing the toroidal magnetic flux density therein.

  12. Tokamak with in situ magnetohydrodynamic generation of toroidal magnetic field

    DOEpatents

    Schaffer, Michael J.

    1986-01-01

    A tokamak apparatus includes an electrically conductive metal pressure vessel for defining a chamber and confining liquid therein. A liner disposed within said chamber defines a toroidal space within the liner and confines gas therein. The metal vessel provides an electrically conductive path linking the toroidal space. Liquid metal is forced outwardly through the chamber outside of the toroidal space to generate electric current in the conductive path and thereby generate a toroidal magnetic field within the toroidal space. Toroidal plasma is developed within the toroidal space about the major axis thereof.

  13. Tokamak transmutation of (nuclear) waste (TTW): Parametric studies

    SciTech Connect

    Cheng, E.T.; Krakowski, R.A.; Peng, Y.K.M.

    1994-06-01

    Radioactive waste generated as part of the commercial-power and defense nuclear programs can be either stored or transmuted. The latter treatment requires a capital-intensive neutron source and is reserved for particularly hazardous and long-lived actinide and fission-product waste. A comparative description of fusion-based transmutation is made on the basis of rudimentary estimates of ergonic performance and transmutation capacities versus inventories for both ultra-low-aspect-ratio (spherical torus, ST) and conversional (aspect-ratio) tokamak fusion-power-core drivers. The parametric systems studies reported herein provides a preamble to more-detailed, cost-based systems analyses.

  14. Sensitivity of kinetic ballooning mode instability to tokamak equilibrium implementations

    NASA Astrophysics Data System (ADS)

    Xie, H. S.; Xiao, Y.; Holod, I.; Lin, Z.; Belli, E. A.

    2016-10-01

    Global, first-principles study of the kinetic ballooning mode (KBM) is crucial to understand tokamak edge physics in high-confinement mode (H-mode). In contrast to the ion temperature gradient mode and trapped electron mode, the KBM is found to be very sensitive to the equilibrium implementations in gyrokinetic codes. In this paper, we show that a second-order difference in Shafranov shift or geometric coordinates, or a difference between local and global profile implementations can bring a factor of two or more discrepancy in real frequency and growth rate. This suggests that an accurate global equilibrium is required for validation of gyrokinetic KBM simulations.

  15. Equilibrium and Instability near the Separatrix in Tokamaks

    NASA Astrophysics Data System (ADS)

    Zhou, Deng

    2016-10-01

    A local equilibrium model near the separatrix with up-down symmetric double nulls is developed in this work. Shaping features like elongation, triangularity and Shafranov shift of the reference magnetic surface are taken into account in the model. The poloidal magnetic field is determined as done in Ref.. The model can be used to study the effect of separatrix on the localized plasma modes such as peeling-ballooning modes near the tokamak edge region. As the first application we use it to calculate the Mercier index determining interchange modes.

  16. Nonlinear saturation of ballooning modes in tokamaks and stellarators

    PubMed Central

    Bauer, F.; Garabedian, P.; Betancourt, O.

    1988-01-01

    The spectral code BETAS computes plasma equilibrium in a toroidal magnetic field B = [unk]s × [unk]Ψ with remarkable accuracy because the finite difference scheme employed in the radial direction allows for discontinuities of the flux function Ψ across the nested surfaces s = const. Instability of higher modes in stellarators like the Heliotron E can be detected in roughly an hour on the best supercomputers by calculating bifurcated equilibria that are defined over just one field period. The method has been validated by comparing results about nonlinear saturation of ballooning modes in tokamaks with numerical data from the PEST code. PMID:16593984

  17. Continuum kinetic modeling of the tokamak plasma edge

    NASA Astrophysics Data System (ADS)

    Dorf, M. A.; Dorr, M. R.; Hittinger, J. A.; Cohen, R. H.; Rognlien, T. D.

    2016-05-01

    The first 4D (axisymmetric) high-order continuum gyrokinetic transport simulations that span the magnetic separatrix of a tokamak are presented. The modeling is performed with the COGENT code, which is distinguished by fourth-order finite-volume discretization combined with mapped multiblock grid technology to handle the strong anisotropy of plasma transport and the complex X-point divertor geometry with high accuracy. The calculations take into account the effects of fully nonlinear Fokker-Plank collisions, electrostatic potential variations, and anomalous radial transport. Topics discussed include: (a) ion orbit loss and the associated toroidal rotation and (b) edge plasma relaxation in the presence of anomalous radial transport.

  18. Evidence of Inward Toroidal Momentum Convection in the JET Tokamak

    SciTech Connect

    Tala, T.; Zastrow, K.-D.; Brix, M.; Corrigan, G.; Giroud, C.; Naulin, V.; Peeters, A. G.; Tardini, G.; Strintzi, D.

    2009-02-20

    Experiments have been carried out on the Joint European Torus tokamak to determine the diffusive and convective momentum transport. Torque, injected by neutral beams, was modulated to create a periodic perturbation in the toroidal rotation velocity. Novel transport analysis shows the magnitude and profile shape of the momentum diffusivity are similar to those of the ion heat diffusivity. A significant inward momentum pinch, up to 20 m/s, has been found. Both results are consistent with gyrokinetic simulations. This evidence is complemented in plasmas with internal transport barriers.

  19. JET, the largest tokamak on the eve of DT operation

    NASA Astrophysics Data System (ADS)

    Horton, L. D.

    2016-11-01

    The Joint European Torus (JET) is the world's largest operating tokamak and the only such machine capable of operating with the fuel mixture (deuterium-tritium) foreseen for a fusion reactor. Since it came into operation in 1983, JET has explored fusion plasmas "in conditions and dimensions approaching those of a fusion reactor" [1]. JET has demonstrated world-record levels of fusion power and energy production, in conditions where the ratio of the fusion power generated to the input power to the plasma, Q, approaches unity.

  20. Halo current diagnostic system of experimental advanced superconducting tokamak

    NASA Astrophysics Data System (ADS)

    Chen, D. L.; Shen, B.; Granetz, R. S.; Sun, Y.; Qian, J. P.; Wang, Y.; Xiao, B. J.

    2015-10-01

    The design, calibration, and installation of disruption halo current sensors for the Experimental Advanced Superconducting Tokamak are described in this article. All the sensors are Rogowski coils that surround conducting structures, and all the signals are analog integrated. Coils with two different cross-section sizes have been fabricated, and their mutual inductances are calibrated. Sensors have been installed to measure halo currents in several different parts of both the upper divertor (tungsten) and lower divertor (graphite) at several toroidal locations. Initial measurements from disruptions show that the halo current diagnostics are working well.