Walia, Piyush; Erdemir, Ahmet; Li, Zong-Ming
2017-01-01
Background Manipulating the carpal arch width (i.e. distance between hamate and trapezium bones) has been suggested as a means to increase carpal tunnel cross-sectional area and alleviate median nerve compression. The purpose of this study was to develop a finite element model of the carpal tunnel and to determine an optimal force direction to maximize area. Methods A planar geometric model of carpal bones at hamate level was reconstructed from MRI with inter-carpal joint spaces filled with a linear elastic surrogate tissue. Experimental data with discrete carpal tunnel pressures (50, 100, 150, and 200 mmHg) and corresponding carpal bone movements were used to obtain material property of surrogate tissue by inverse finite element analysis. The resulting model was used to simulate changes of carpal arch widths and areas with directional variations of a unit force applied at the hook of hamate. Findings Inverse finite element model predicted the experimental area data within 1.5% error. Simulation of force applications showed that carpal arch width and area were dependent on the direction of force application, and minimal arch width and maximal area occurred at 138° (i.e. volar-radial direction) with respect to the hamate-to-trapezium axis. At this force direction, the width changed to 24.4 mm from its initial 25.1 mm (3% decrease), and the area changed to 301.6 mm2 from 290.3 mm2 (4% increase). Interpretation The findings of the current study guide biomechanical manipulation to gain tunnel area increase, potentially helping reduce carpal tunnel pressure and relieve symptoms of compression median neuropathy. PMID:28073093
What does the transverse carpal ligament contribute to carpal stability?
Vanhees, Matthias; Verstreken, Frederik; van Riet, Roger
2015-02-01
Background The transverse carpal ligament is well known for its involvement in carpal tunnel syndrome, and sectioning of this ligament remains the definite treatment for this pathology. Some authors believe that the transverse carpal ligament is an important stabilizer of the carpal arch, whereas others do not consider it to be significant. Several studies have been performed, both in vivo and in in vitro. Sectioning of the transverse carpal ligament does not seem to have any effect on the width of the carpal arch in the unloaded condition. However, patients will load the arch during their activities of daily living. Materials and Methods A cadaveric study was done with distraction of the carpal bones before and after sectioning the transverse carpal ligament. Results With the transverse carpal ligament intact, the carpal arch is mobile, with distraction leading up to 50% widening of the arch. Sectioning of the transverse carpal ligament resulted in a significant widening of the carpal arch by a further 30%. Conclusions Loading of the carpal arch after sectioning of the transeverse carapal ligament leads to a significant increase in intracarpal mobility. This will inevitably influence carpal kinematics in the patient and might be responsible for some complications after simple carpal tunnel releases, such as pillar pain, palmar tenderness, and loss of grip strength.
Tensile properties of the transverse carpal ligament and carpal tunnel complex.
Ugbolue, Ukadike C; Gislason, Magnus K; Carter, Mark; Fogg, Quentin A; Riches, Philip E; Rowe, Philip J
2015-08-01
A new sophisticated method that uses video analysis techniques together with a Maillon Rapide Delta to determine the tensile properties of the transverse carpal ligament-carpal tunnel complex has been developed. Six embalmed cadaveric specimens amputated at the mid-forearm and aged (mean (SD)): 82 (6.29) years were tested. The six hands were from three males (four hands) and one female (two hands). Using trigonometry and geometry the elongation and strain of the transverse carpal ligament and carpal arch were calculated. The cross-sectional area of the transverse carpal ligament was determined. Tensile properties of the transverse carpal ligament-carpal tunnel complex and Load-Displacement data were also obtained. Descriptive statistics, one-way ANOVA together with a post-hoc analysis (Tukey) and t-tests were incorporated. A transverse carpal ligament-carpal tunnel complex novel testing method has been developed. The results suggest that there were no significant differences between the original transverse carpal ligament width and transverse carpal ligament at peak elongation (P=0.108). There were significant differences between the original carpal arch width and carpal arch width at peak elongation (P=0.002). The transverse carpal ligament failed either at the mid-substance or at their bony attachments. At maximum deformation the peak load and maximum transverse carpal ligament displacements ranged from 285.74N to 1369.66N and 7.09mm to 18.55mm respectively. The transverse carpal ligament cross-sectional area mean (SD) was 27.21 (3.41)mm(2). Using this method the results provide useful biomechanical information and data about the tensile properties of the transverse carpal ligament-carpal tunnel complex. Copyright © 2015 Elsevier Ltd. All rights reserved.
Gull, S.; Spence, R. A. J.; Loan, W.
2011-01-01
False aneurysms of the palmar arteries are rare. They are usually associated with traumatic injuries to the hand vasculature. We present a case of superficial palmar arch aneurysm (SPAA), complicating carpal tunnel decompression which presented as a pulsatile mass at the site of previous surgery. Initial diagnosis was made on clinical examination and confirmed on doppler ultrasound (US) and computed tomographic angiography (CTA). The feeding vessel of the aneurysm was subsequently occluded using coil embolization. PMID:21547251
Shahid, Fazal; Alam, Mohammad Khursheed; Khamis, Mohd Fadhli
2015-01-01
Objective: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups. Materials and Methods: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups. Results: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both. Conclusions: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management. PMID:26929686
Finite element analysis for transverse carpal ligament tensile strain and carpal arch area.
Yao, Yifei; Erdemir, Ahmet; Li, Zong-Ming
2018-05-17
Mechanics of carpal tunnel soft tissue, such as fat, muscle and transverse carpal ligament (TCL), around the median nerve may render the median nerve vulnerable to compression neuropathy. The purpose of this study was to understand the roles of carpal tunnel soft tissue mechanical properties and intratunnel pressure on the TCL tensile strain and carpal arch area (CAA) using finite element analysis (FEA). Manual segmentation of the thenar muscles, skin, fat, TCL, hamate bone, and trapezium bone in the transverse plane at distal carpal tunnel were obtained from B-mode ultrasound images of one cadaveric hand. Sensitivity analyses were conducted to examine the dependence of TCL tensile strain and CAA on TCL elastic modulus (0.125-10 MPa volar-dorsally; 1.375-110 MPa transversely), skin-fat and thenar muscle initial shear modulus (1.6-160 kPa for skin-fat; 0.425-42.5 kPa for muscle), and intratunnel pressure (60-480 mmHg). Predictions of TCL tensile strain under different intratunnel pressures were validated with the experimental data obtained on the same cadaveric hand. Results showed that skin, fat and muscles had little effect on the TCL tensile strain and CAA changes. However, TCL tensile strain and CAA increased with decreased elastic modulus of TCL and increased intratunnel pressure. The TCL tensile strain and CAA increased linearly with increased pressure while increased exponentially with decreased elastic modulus of TCL. Softening the TCL by decreasing the elastic modulus may be an alternative clinical approach to carpal tunnel expansion to accommodate elevated intratunnel pressure and alleviate median nerve compression neuropathy. Copyright © 2018 Elsevier Ltd. All rights reserved.
Teh, K K; Ng, E S; Choon, D S K
2009-08-01
This cadaveric study evaluates the margin of safety and technical efficacy of mini open carpal tunnel release performed using Knifelight (Stryker Instruments) through a transverse 1 cm wrist incision. A single investigator released 32 wrists in 17 cadavers. The wrists were then explored to assess the completeness of release and damage to vital structures including the superficial palmar arch, palmar cutaneous branch and recurrent branch of the median nerve. All the releases were complete and no injury to the median nerve and other structures were observed. The mean distance of the recurrent motor branch to the ligamentous divisions was 5.7 +/- 2.4 mm, superficial palmar arch was 8.7 +/- 3.1 mm and palmar cutaneous branch to the ligamentous division was 7.2 +/- 2.4 mm. The mean length of the transverse carpal ligament was 29.3 +/- 3.7 mm. Guyon's canal was preserved in all cases.
Evaluation of arch width variations among different skeletal patterns in South Indian population.
Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar
2013-01-01
Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. The results showed that male arch widths were significantly larger than those of females (P < 0.05) and there was a significant decrease in inter arch width as the MP-SN angle increased in untreated adult South Indian population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment.
Meyer, Anna H; Woods, Michael G; Manton, David J
2014-02-01
In this retrospective study, we examined and compared the pretreatment and posttreatment arch widths and buccal corridor changes in subjects who had received orthodontic treatment either with or without premolar extractions. Pretreatment and posttreatment casts, frontal smiling photographs, and lateral cephalograms of 30 extraction and 27 nonextraction patients were analyzed to determine any significant differences in arch widths, buccopalatal inclinations of the teeth, and buccal corridor widths and areas, both within and between the 2 groups. Relationships between buccal corridor measurements and corresponding arch widths and buccopalatal inclinations of the teeth were also examined. There was a significant increase in the posttreatment maxillary intercanine width in the extraction group but not in the nonextraction group. Both the pretreatment and posttreatment arch widths between the maxillary first molars and at the level of the posterior rugae were greater in the nonextraction group than in the extraction group. There were no significant differences in any buccal corridor widths or areas measured between the extraction and nonextraction subjects. Because they reflect different morphologies, there are likely to be significant differences in average maxillary anterior and posterior posttreatment arch widths in those treated with or without extractions. However, these arch width differences are not likely to be discernible in extraction and nonextraction patients as differences in the buccal corridor widths and areas. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study
D’Souza, Ivor M; Kumar, H. C. Kiran; Shetty, K. Sadashiva
2015-01-01
Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females) were selected who had been treated by rapid maxillary expansion (RME) using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA). Pretreatment (T1), postexpansion (T2), and posttreatment (T3) dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1–T2, T2–T3 and T1–T3 were determined for each patient. The mean difference between T1–T2, T2–T3 and T1–T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar regions. Results: The intercanine arch width increased by 2.9 mm, inter first premolar width increased by 3.2 mm, inter second premolar width increased by 4.6 mm, intermolar width increased by 4.4 mm, arch perimeter increased by 3.2 mm, arch length decreased by 1.8 mm from pretreatment to posttreatment. There is a strong positive correlation of arch perimeter with intercanine width (r2 = 0.99), interpremolar width (r2 = 0.99) and intermolar width (r2 = 0.98), indicating that there is a significant increase in arch perimeter with increase in arch width at the canine, premolars and molar regions. Conclusion: Findings of this study demonstrate that there was a significant increase in the intercanine, inter first premolar, inter second premolar intermolar arch width and arch perimeter from pretreatment to postexpansion, which was stable at the end of fixed mechanotherapy (PEA). There was a nonsignificant decrease in arch length from pretreatment to postexpansion that further decreased nonsignificantly from postexpansion to posttreatment. PMID:25684912
Evaluation of arch width variations among different skeletal patterns in South Indian population
Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar
2013-01-01
Background: Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. Objective: This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Materials and Methods: Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. Results: The results showed that male arch widths were significantly larger than those of females (P < 0.05) and there was a significant decrease in inter arch width as the MP-SN angle increased in untreated adult South Indian population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. Conclusion: It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment. PMID:23633842
Variations in tooth size and arch dimensions in Malay schoolchildren.
Hussein, Khalid W; Rajion, Zainul A; Hassan, Rozita; Noor, Siti Noor Fazliah Mohd
2009-11-01
To compare the mesio-distal tooth sizes and dental arch dimensions in Malay boys and girls with Class I, Class II and Class III malocclusions. The dental casts of 150 subjects (78 boys, 72 girls), between 12 and 16 years of age, with Class I, Class II and Class III malocclusions were used. Each group consisted of 50 subjects. An electronic digital caliper was used to measure the mesio-distal tooth sizes of the upper and lower permanent teeth (first molar to first molar), the intercanine and intermolar widths. The arch lengths and arch perimeters were measured with AutoCAD software (Autodesk Inc., San Rafael, CA, U.S.A.). The mesio-distal dimensions of the upper lateral incisors and canines in the Class I malocclusion group were significantly smaller than the corresponding teeth in the Class III and Class II groups, respectively. The lower canines and first molars were significantly smaller in the Class I group than the corresponding teeth in the Class II group. The lower intercanine width was significantly smaller in the Class II group as compared with the Class I group, and the upper intermolar width was significantly larger in Class III group as compared with the Class II group. There were no significant differences in the arch perimeters or arch lengths. The boys had significantly wider teeth than the girls, except for the left lower second premolar. The boys also had larger upper and lower intermolar widths and lower intercanine width than the girls. Small, but statistically significant, differences in tooth sizes are not necessarily accompanied by significant arch width, arch length or arch perimeter differences. Generally, boys have wider teeth, larger lower intercanine width and upper and lower intermolar widths than girls.
Farrington-Rock, Claire; Kirilova, Veneta; Dillard-Telm, Lisa; Borowsky, Alexander D; Chalk, Sara; Rock, Matthew J; Cohn, Daniel H; Krakow, Deborah
2008-03-01
Spondylocarpotarsal synostosis syndrome (SCT) is an autosomal recessive disease that is characterized by short stature, and fusions of the vertebrae and carpal and tarsal bones. SCT results from homozygosity or compound heterozygosity for nonsense mutations in FLNB. FLNB encodes filamin B, a multifunctional cytoplasmic protein that plays a critical role in skeletal development. Protein extracts derived from cells of SCT patients with nonsense mutations in FLNB did not contain filamin B, demonstrating that SCT results from absence of filamin B. To understand the role of filamin B in skeletal development, an Flnb-/- mouse model was generated. The Flnb-/- mice were phenotypically similar to individuals with SCT as they exhibited short stature and similar skeletal abnormalities. Newborn Flnb-/- mice had fusions between the neural arches of the vertebrae in the cervical and thoracic spine. At postnatal day 60, the vertebral fusions were more widespread and involved the vertebral bodies as well as the neural arches. In addition, fusions were seen in sternum and carpal bones. Analysis of the Flnb-/- mice phenotype showed that an absence of filamin B causes progressive vertebral fusions, which is contrary to the previous hypothesis that SCT results from failure of normal spinal segmentation. These findings suggest that spinal segmentation can occur normally in the absence of filamin B, but the protein is required for maintenance of intervertebral, carpal and sternal joints, and the joint fusion process commences antenatally.
Maxillary arch dimensions associated with acoustic parameters in prepubertal children.
Hamdan, Abdul-Latif; Khandakji, Mohannad; Macari, Anthony Tannous
2018-04-18
To evaluate the association between maxillary arch dimensions and fundamental frequency and formants of voice in prepubertal subjects. Thirty-five consecutive prepubertal patients seeking orthodontic treatment were recruited (mean age = 11.41 ± 1.46 years; range, 8 to 13.7 years). Participants with a history of respiratory infection, laryngeal manipulation, dysphonia, congenital facial malformations, or history of orthodontic treatment were excluded. Dental measurements included maxillary arch length, perimeter, depth, and width. Voice parameters comprising fundamental frequency (f0_sustained), Habitual pitch (f0_count), Jitter, Shimmer, and different formant frequencies (F1, F2, F3, and F4) were measured using acoustic analysis prior to initiation of any orthodontic treatment. Pearson's correlation coefficients were used to measure the strength of associations between different dental and voice parameters. Multiple linear regressions were computed for the predictions of different dental measurements. Arch width and arch depth had moderate significant negative correlations with f0 ( r = -0.52; P = .001 and r = -0.39; P = .022, respectively) and with habitual frequency ( r = -0.51; P = .0014 and r = -0.34; P = .04, respectively). Arch depth and arch length were significantly correlated with formant F3 and formant F4, respectively. Predictors of arch depth included frequencies of F3 vowels, with a significant regression equation ( P-value < .001; R 2 = 0.49). Similarly, fundamental frequency f0 and frequencies of formant F3 vowels were predictors of arch width, with a significant regression equation ( P-value < .001; R 2 = 0.37). There is a significant association between arch dimensions, particularly arch length and depth, and voice parameters. The formant most predictive of arch depth and width is the third formant, along with fundamental frequency of voice.
1983-05-01
longitudinal changes in arch width between lateral incisors, canines and second premolars or deciduous second molars at four stages of dental eruption in 22 male... dental arch or skeletal widths. Also, he made no attempt to divide his sample into normal and malocclusion groups. -J 7 Warren (1959) studying twenty...buccal crossbite of the posterior teeth Many clinicians believe that this problem is highly correlated with tfte type or classification of malocclusion
Effect of heat treatment on stainless steel lingual arch appliances.
Nagatani, S S; Fisher, J G; Hondrum, S O
1996-01-01
This study evaluated the effect of heat treatment on 0.036" diameter stainless steel wire. Forty wires were bent into arch forms (20 experimental and 20 control). The arch width changes were measured and the forces generated were determined over an eight week period. Heat treatment resulted in immediate and significant expansion (p < 0.001) followed by stabilization of arch width. The control wires continued to expand throughout the study. The force generated by the control group and experimental group expansion was capable of producing tooth movement.
NASA Technical Reports Server (NTRS)
Davis, J. M.; Krieger, A. S.
1982-01-01
The properties of coronal arches located on the peripheries of active regions, observed during a sounding rocket flight on March 8, 1973, are discussed. The arches are found to overlie filament channels and their footpoints are traced on locations on the perimeters of supergranulation cells. The arches have a wide range of lengths although their widths are well approximated by the value 2.2 x 10 to the 9th cm. Comparison of the size of the chromospheric footprint with the arc width indicates that arches do not always expand as they ascend into the corona. The electron temperatures and densities of the plasma contained in the arches were measured and the pressure calculated; typical values are 2-million K, 1 x 10 to the 9th/cu cm, and 0.2 dyne/sq cm, respectively. The variation of these parameters with position along the length of the arch indicates that the arches are not in hydrostatic equilibrium.
Single injection of platelet-rich plasma as a novel treatment of carpal tunnel syndrome.
Malahias, Michael Alexander; Johnson, Elizabeth O; Babis, George C; Nikolaou, Vasileios S
2015-11-01
Both in vitro and in vivo experiments have confirmed that platelet-rich plasma has therapeutic effects on many neuropathies, but its effects on carpal tunnel syndrome remain poorly understood. We aimed to investigate whether single injection of platelet-rich plasma can improve the clinical symptoms of carpal tunnel syndrome. Fourteen patients presenting with median nerve injury who had suffered from mild carpal tunnel syndrome for over 3 months were included in this study. Under ultrasound guidance, 1-2 mL of platelet-rich plasma was injected into the region around the median nerve at the proximal edge of the carpal tunnel. At 1 month after single injection of platelet-rich plasma, Visual Analogue Scale results showed that pain almost disappeared in eight patients and it was obviously alleviated in three patients. Simultaneously, the disabilities of the arm, shoulder and hand questionnaire showed that upper limb function was obviously improved. In addition, no ultrasonographic manifestation of the carpal tunnel syndrome was found in five patients during ultrasonographic measurement of the width of the median nerve. During 3-month follow-up, the pain was not greatly alleviated in three patients. These findings show very encouraging mid-term outcomes regarding use of platelet-rich plasma for the treatment of carpal tunnel syndrome.
Al-Hilal, Layal H; Sultan, Kinda; Hajeer, Mohammad Y; Mahmoud, Ghiath; Wanli, Abdulrahman A
2018-04-01
Aim: The aim of this study is (1) to inspect any difference in mandibular arch widths between males and females in class I and class II division 1 (class malocclusions using cone-beam computed tomography (CBCT), (2) to compare the mandibular dental and basal widths between the two groups, and (3) to investigate any possible correlation between dental and basal arch widths in both groups. Materials and methods: The CBCT images of 68 patients aged between 18 and 25 years consisted of 34 class I (17 males and 17 females) and 34 class (17 males and 17 females) who were recruited at the Department of Orthodontics, University of Damascus Dental School (Syria). Using on-demand three-dimensional (3D) on axial views, facial axis points for dental measurements and basal bone center (BBC) points for basal measurements were identified on lower canines and first molars. Dental and basal intercanine width (ICW) and intermolar width (IMW) were measured. Results: Independent t-test showed a statistically significant difference between males and females in several variables in both groups and a statistically significant difference between class I and class groups in the basal ICW for both genders and in the dental ICW for females only (p < 0.05). In class I group, Pearson's correlation coefficients between dental and basal measurements showed a strong correlation in the IMW for both genders (r > 0.73; p < 0.01) and a moderate correlation in females' ICW (r = 0.67; p < 0.01). In the class group, a moderate correlation in females' IMW (r = 0.67; p < 0.01) was found. Conclusion: Females compared with males had narrower dimensions. Class I patients had larger ICW than class II-1 patients in all measurements and had narrower IMW than class in most measurements for both genders. There were moderate-to-strong correlations between dental and basal dimensions. BBC points might be landmarks that accurately represent the basal bone arch. Clinical significance: CBCT-based assessments of dental and basal arch dimensions provide a great opportunity to accurately evaluate these aspects, to enhance clinicians' decisions regarding proper tooth movements, and to achieve good dentoalveolar intra-arch harmony. Keywords: Basal arch, Class I, Class Cone-beam computed tomography, Dental arch, Intercanine width, Intermolar width.
NASA Astrophysics Data System (ADS)
Ahmadi, Ali; Seyedi Hosseininia, Ehsan
2017-06-01
This paper discusses the formation of stable arches in granular materials by using a series of laboratory tests. To this aim, a developed trapdoor apparatus is designed to find dimensions of arches formed over the door in cohesionless aggregates. This setup has two new important applications. In order to investigate the maximum width of the opening generated exactly on the verge of failure, the door can be open to an arbitrary size. In addition, the box containing granular materials (or base angle) is able to be set on optional angles from zero to 90 degrees with respect to the horizontal. Therefore, it is possible to understand the effect of different levels of gravity accelerations on the formed arches. It is observed that for all tested granular materials, increasing the door size and decreasing the base angle, both cause to increase the width and height of the arch. Moreover, the shape of all arches is governed by a parabola. Furthermore, the maximum door width is approximately five to 8.6 times the particle size, depending on the internal friction angle of materials and the base angle.
[Clinical effect of removable lingual arch plus auxiliary spring for dental arch expansion].
Sun, Feng-yang; Zhang, Yu
2007-04-01
Observe the clinical effect of removable lingual arch plus auxiliary spring for convenient dental (especially mandibular) arch expansion. Seventeen patients with dental arch constriction complicated by mild dental crowding were enrolled in this study, including 9 requiring maxillary arch expansion and 8 necessitating mandibular expansion. The patients were divided to two groups at random for arch expansion with removable lingual arch plus auxiliary spring and with Quad-helix, respectively, and the effect of arch expansion was compared between the two groups. After 8 weeks of arch expansion, the average width of U4-U4 and U5-U5 in removable lingual arch group was enlarged by 2.2 mm and 3.0 mm, and that in Quad-helix group by 2.3 mm and 3.5 mm, respectively, showing no significant differences between the two groups (P>0.05). After 12 weeks of treatment, the average width of L4-L4 and L5-L5 in the former group was enlarged by 2.3 mm and 2.5 mm, respectively, significantly greater than that in the latter group (1.0 mm and 1.2 mm, P<0.05). Removable lingual arch plus auxiliary spring allows significant expansion of the middle segment of the dental arch (bicuspids), and can be more effective than Quad-helix for mandibular arch expansion.
Variation in form of mandibular, light, round, preformed NiTi archwires.
Saze, Naomi; Arai, Kazuhito
2016-09-01
To evaluate the variation in form of nickel-titanium (NiTi) archwires by comparing them with the dental arch form of normal Japanese subjects before and after placing them in the first molar tubes. The mandibular dental casts of 30 normal subjects were scanned, and the dental arch depths and widths from the canine to the first molar were measured. Standardized images of 34 types of 0.016-inch preformed NiTi archwires were also taken in a 37°C environment, and the widths were measured and then classified by cluster analysis. Images of these archwires placed in a custom jig with brackets attached at the mean locations of the normal mandibular central incisors and first molar were additionally taken. The widths of the pooled and classified archwires were then compared with the normal dental arch widths before and after placement in the jig and among the groups (P < .05). The archwires were classified into three groups: small, medium, and large. The archwire widths in the small and medium groups were narrower than those at all examined tooth widths, except in the case of the premolars of the medium group. After placement in the jig, the pooled archwire widths were found to be significantly narrower and wider at the canine and second premolar, respectively, than at the dental arch, but not in the individual comparisons between groups. The variation observed in the mandibular NiTi archwire forms significantly decreased following fitting into the normal positions of the first molars.
Grassia, Vincenzo; d'Apuzzo, Fabrizia; Jamilian, Abdolreza; Femiano, Felice; Favero, Lorenzo; Perillo, Letizia
2015-01-01
Aim of this retrospective observational study was to compare upper and lower dental changes in patients treated with Rapid Maxillary Expansion (RME) and Mixed Maxillary Expansion (MME), assessed by dental cast analysis. Treatment groups consisted of 42 patients: the RME group (n = 21) consisted of 13 female and 8 male subjects with the mean age of 8.8 years ± 1.37 at T0 and 9.6 years ± 1.45 at T1; the MME group (n = 21) consisted of 12 female and 9 male patients with a mean age of 8.9 years ± 2.34 at T0 and 10.5 years ± 2.08 at T1. The upper and lower arch analysis was performed on four dental bilateral landmarks, on upper and lower casts; also upper and lower arch depths were measured. The groups were compared using independent sample t-test to estimate dental changes in upper and lower arches. Before expansion treatment (T0), the groups were similar for all examined variables (p>0.05). In both RME and MME group, significant increments in all the variables for maxillary and mandibular arch widths were observed after treatment. No significant differences in maxillary and mandibular arch depths were observed at the end of treatment in both groups. An evaluation of the changes after RME and MME (T1) showed statistically significant differences in mandibular arch depth (p<0.001) and maxillary intercanine widths (p<0.05). Differences in maxillary arch depth and arch width measurements were not significant. RME and MME can be considered two effective treatment options to improve transverse arch dimensions and gain space in the dental arches. A greater lower arch expansion was observed in the MME group, which might be attributed to the "lip bumper effects" observed in the MME protocol.
Shook, Corey; Kim, Sohyon Michelle; Burnheimer, John
2016-07-01
To evaluate the effect of Damon self-ligating and conventional bracket systems on buccal corridor widths and areas. A retrospective sample of consecutively treated patients using either conventional (CG, n = 45) or Damon self-ligating (SL, n = 39) brackets was analyzed to determine any differences in buccal corridor widths and areas both within and between groups. Pretreatment and posttreatment frontal photographs were transferred to Photoshop CC, standardized using intercanthal width, and linear and area measurements were performed with tools in Photoshop CC. Ratios were then calculated for statistical analysis. Relationships between arch widths and buccal corridors were also examined. There were no significant differences in the posttreatment intercanine or intermolar widths either within or between the CG and SL groups. There were no significant differences in any buccal corridor width or area measurement either within or between the CG and SL groups. There were strong correlations with the intercanine width and the corresponding buccal corridor smile width measurements. There was an inverse correlation with the buccal corridor area in relation to the canine and the total smile width. It is likely that posttreatment increases in arch width can be seen in patients treated with either a conventional bracket system or the Damon system. It is highly unlikely that there is any significant difference in buccal corridor width or area in patients treated with the Damon self-ligating system or a conventional bracket system.
Development and morphogenesis of human wrist joint during embryonic and early fetal period
Hita-Contreras, Fidel; Martínez-Amat, Antonio; Ortiz, Raúl; Caba, Octavio; Álvarez, Pablo; Prados, José C; Lomas-Vega, Rafael; Aránega, Antonia; Sánchez-Montesinos, Indalecio; Mérida-Velasco, Juan A
2012-01-01
The development of the human wrist joint has been studied widely, with the main focus on carpal chondrogenesis, ligaments and triangular fibrocartilage. However, there are some discrepancies concerning the origin and morphogenetic time-table of these structures, including nerves, muscles and vascular elements. For this study we used serial sections of 57 human embryonic (n = 30) and fetal (n = 27) specimens from O’Rahilly stages 17–23 and 9–14 weeks, respectively. The following phases in carpal morphogenesis have been established: undifferentiated mesenchyme (stage 17), condensated mesenchyme (stages 18 and 19), pre-chondrogenic (stages 19 and 20) and chondrogenic (stages 21 and over). Carpal chondrification and osteogenic processes are similar, starting with capitate and hamate (stage 19) and ending with pisiform (stage 22). In week 14, a vascular bud penetrates into the lunate cartilaginous mold, early sign of the osteogenic process that will be completed after birth. In stage 18, median, ulnar and radial nerves and thenar eminence appear in the hand plate. In stage 21, there are indications of the interosseous muscles, and in stage 22 flexor digitorum superficialis, flexor digitorum profundus and lumbrical muscles, transverse carpal ligament and collateral ligaments emerge. In stage 23, the articular disc, radiocarpal and ulnocarpal ligaments and deep palmar arterial arch become visible. Radiate carpal and interosseous ligaments appear in week 9, and in week 10, dorsal radiocarpal ligament and articular capsule are evident. Finally, synovial membrane is observed in week 13. We have performed a complete analysis of the morphogenesis of the structures of the human wrist joint. Our results present new data on nervous and arterial elements and provide the basis for further investigations on anatomical pathology, comparative morphology and evolutionary anthropology. PMID:22428933
Correlation and agreement of a digital and conventional method to measure arch parameters.
Nawi, Nes; Mohamed, Alizae Marny; Marizan Nor, Murshida; Ashar, Nor Atika
2018-01-01
The aim of the present study was to determine the overall reliability and validity of arch parameters measured digitally compared to conventional measurement. A sample of 111 plaster study models of Down syndrome (DS) patients were digitized using a blue light three-dimensional (3D) scanner. Digital and manual measurements of defined parameters were performed using Geomagic analysis software (Geomagic Studio 2014 software, 3D Systems, Rock Hill, SC, USA) on digital models and with a digital calliper (Tuten, Germany) on plaster study models. Both measurements were repeated twice to validate the intraexaminer reliability based on intraclass correlation coefficients (ICCs) using the independent t test and Pearson's correlation, respectively. The Bland-Altman method of analysis was used to evaluate the agreement of the measurement between the digital and plaster models. No statistically significant differences (p > 0.05) were found between the manual and digital methods when measuring the arch width, arch length, and space analysis. In addition, all parameters showed a significant correlation coefficient (r ≥ 0.972; p < 0.01) between all digital and manual measurements. Furthermore, a positive agreement between digital and manual measurements of the arch width (90-96%), arch length and space analysis (95-99%) were also distinguished using the Bland-Altman method. These results demonstrate that 3D blue light scanning and measurement software are able to precisely produce 3D digital model and measure arch width, arch length, and space analysis. The 3D digital model is valid to be used in various clinical applications.
Siphon flows in isolated magnetic flux tubes. III - The equilibrium path of the flux-tube arch
NASA Technical Reports Server (NTRS)
Thomas, John H.; Montesinos, Benjamin
1990-01-01
It is shown how to calculate the equilibrium path of a thin magnetic flux tube in a stratified, nonmagnetic atmosphere when the flux tube contains a steady siphon flow. The equilbrium path of a static thin flux tube in an infinite stratified atmosphere generally takes the form of a symmetric arch of finite width, with the flux tube becoming vertical at either end of the arch. A siphon flow within the flux tube increases the curvature of the arched equilibrium path in order that the net magnetic tension force can balance the inertial force of the flow, which tries to straighten the flux tube. Thus, a siphon flow reduces the width of the arched equilibrium path, with faster flows producing narrower arches. The effect of the siphon flow on the equilibrium path is generally greater for flux tubes of weaker magnetic field strength. Examples of the equilibrium are shown for both isothemal and adiabatic siphon flows in thin flux tubes in an isothermal external atmosphere.
Peixoto, Adriano Porto; Pinto, Ary dos Santos; Garib, Daniela Gamba; Gonçalves, João Roberto
2014-01-01
Introduction This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Methods Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. Results During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between centroid and gingival changes suggested that upper and lower arch premolars buccaly proclined during the pre-surgical period. Conclusions Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods. PMID:25279524
Dental arch dimensional changes after adenotonsillectomy in prepubertal children.
Petraccone Caixeta, Anna Cristina; Andrade, Ildeu; Bahia Junqueira Pereira, Tatiana; Franco, Letícia Paiva; Becker, Helena Maria Gonçalves; Souki, Bernardo Quiroga
2014-04-01
The purposes of this study were to investigate the dental arch changes after adenotonsillectomies in prepubertal children and to compare the dental arch dimensions of mouth-breathing and nasal-breathing children. The sample included 49 prepubertal severely obstructed mouth-breathing children and 46 prepubertal nasal-breathing children. Twenty-four of the 49 mouth-breathing children had an adenotonsillectomy and composed the adenotonsillectomy subgroup. The 25 children in whom the mouth-breathing pattern was unchanged during the 1-year study period composed the control subgroup. The mouth-breathing children showed a deeper palatal vault, a larger mandibular width, and a larger mandibular arch length in comparison with the nasal-breathing children. After airway clearance, the adenotonsillectomy group showed a significant maxillary transverse width gain compared with the control subgroup. The control subgroup showed a significant deepening of the palatal height when compared with the adenotonsillectomy subgroup after 1 year. The adenotonsillectomy subgroup had a significantly different pattern of arch development compared with the untreated controls. After adenotonsillectomy, the mouth-breathing children showed greater maxillary transverse development than did the controls. The palatal vault deepened in the untreated children. The mouth-breathing children showed a deeper palatal vault, a larger mandibular width, and a larger mandibular arch length in comparison with the nasal-breathing children. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Peixoto, Adriano Porto; dos Santos Pinto, Ary; Garib, Daniela Gamba; Gonçalves, João Roberto
2014-01-01
This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between changes in centroid and gingival points suggested that upper and lower premolars buccaly proclined during the pre-surgical period. Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.
Dental arch changes in postretention in Class II division 1 extraction cases.
Anuwongnukroh, Niwat; Dechkunakorn, Surachai; Kunakornporamut, Kannida; Tua-Ngam, Peerapong
2017-06-01
The purpose of this study is to evaluate the postretention stability of the dental arches in Class II division 1 patients treated with four bicuspid extractions and the edgewise technique. A digital caliper was used to analyze the dental casts from 29 Class II division 1 malocclusion patients with skeletal type II (14 males, 15 females; ages ranging from 10.2-18.0 years), treated with four bicuspid extractions and the edgewise technique. Intercanine width, intermolar width, arch length, irregularity index, overjet and overbite were evaluated at three times: pretreatment (T1), posttreatment (T2) and postretention (T3) (mean: 4.15 years). Student's t-tests were used to compare the pretreatment-posttreatment, posttreatment-postretention and pretreatment-postretention. Significance was determined at P<0.05. The results of the study are listed as: (1) The upper and lower intercanine widths significantly increased (P<0.05) between T1-T2 and decreased between T2-T3. However, no significant changes were observed between T1-T3; (2) The upper and lower intermolar widths significantly decreased (P<0.05) between T1-T2, between T2-T3 and between T1-T3, except for the upper intermolar width between T2-T3 which showed no significant change; (3) The upper and lower arch lengths significantly decreased (P<0.05) at posttreatment and postretention due to the closure of extraction spaces. Both the upper and lower arch lengths significantly decreased between T1-T2, T2-T3, and T1-T3, except for the upper arch length between T2-T3, which showed no significant change; (4) The irregularity index was significantly improved after treatment. However, there was a slight increase in incisor irregularity at postretention. At postretention, 75.86% of the patients had mild crowding, 20.68% had moderate crowding, 3.48% had severe crowding; (5) The overjet and overbite significantly decreased (P<0.05) between T1-T2 and increased between T2-T3. The changes in the dental arches were small at postretention with a tendency to return towards their original position. The overall stability of Class II division 1 extraction cases is relatively good. Copyright © 2017 CEO. Published by Elsevier Masson SAS. All rights reserved.
Difference between manual and digital measurements of dental arches of orthodontic patients.
Jiménez-Gayosso, Sandra Isabel; Lara-Carrillo, Edith; López-González, Saraí; Medina-Solís, Carlo Eduardo; Scougall-Vilchis, Rogelio José; Hernández-Martínez, César Tadeo; Colomé-Ruiz, Gabriel Eduardo; Escoffié-Ramirez, Mauricio
2018-06-01
The objective of this study was to compare the differences between the measurements performed manually to those obtained using a digital model scanner of patients with orthodontic treatment.A cross-sectional study was performed in a sample of 30 study models from patients with permanent dentition who attended a university clinic between January 2010 and December 2015. For the digital measurement, a Maestro 3D Ortho Studio scanner (Italy) was used and Mitutoyo electronic Vernier calipers (Kawasaki, Japan) were used for manual measurement. The outcome variables were the measurements for maxillary intercanine width, mandibular intercanine width, maxillary intermolar width, mandibular intermolar width, overjet, overbite, maxillary arch perimeter, mandibular arch perimeter, and palate height. The independent variables, besides age and sex, were a series of arc characteristics. The Student t test, paired Student t test, and Pearson correlation in SPSS version 19 were used for the analysis.Of the models, 60% were from women. Two of nine measurements for pre-treatment and 6 of 9 measurements for post-treatment showed a difference. The variables that were different between the manual and digital measurements in the pre-treatment were maxillary intermolar width and palate height (P < .05). Post-treatment, differences were found in mandibular intercanine width, palate height, overjet, overbite, and maxillary and mandibular arch perimeter (P < .05).The models measured manually and digitally showed certain similarities for both vertical and transverse measurements. There are many advantages offered to the orthodontist, such as easy storage; savings in time and space; facilitating the reproducibility of information; and conferring the security of not deteriorating over time. Its main disadvantage is the cost.
Cerón-Zapata, A M; López-Palacio, A M; Rodriguez-Ardila, M J; Berrio-Gutiérrez, L M; De Menezes, M; Sforza, C
2016-02-01
To compare the three-dimensional changes occurring in the maxillary arch during the use of modified pre-surgical nasoalveolar moulding (PNAM) and Hotz's plate. A clinical trial including 32 children with unilateral cleft lip and palate (UCLP), 16 treated with Hotz's plate and 16 with PNAM, was performed. Impressions of the maxillary arches were taken: A. prior to pre-surgical orthopaedics, B. before cheiloplasty and C. after cheiloplasty. Models were digitised using a stereophotogrammetric instrument, and geodesic distances were calculated: anterior, canine and posterior widths of the arch, and lengths and cleft depths of the larger and shorter segments. The time and treatment effects were assessed by two-factor anova. A significant effect of treatment was found for cleft depth at the larger segment: children treated with Hotz's plate had significantly deeper cleft than children treated with PNAM. All distances significantly changed during time: the anterior and canine widths decreased, while the posterior width, the lengths and depths of the cleft segments increased. Significant treatment per time interactions was found. The anterior and canine widths reduced more with PNAM between time points A and B while Hotz's treatment was more effective between B and C. The shorter segment depth increased more between B and C with PNAM, and between A and B with Hotz's plate. During pre-surgical orthopaedics, therapy with PNAM obtained the best results in reducing the width at the anterior segment of the cleft. This treatment gave a lower increase in cleft depth than treatment with Hotz's plate. © 2015 John Wiley & Sons Ltd.
ERIC Educational Resources Information Center
Zajac, David J.; Cevidanes, Lucia; Shah, Sonam; Haley, Katarina L.
2012-01-01
Purpose: The purpose of this study was twofold: (a) to determine maxillary arch dimensions of children with repaired cleft lip and palate (CLP) who produced middorsum palatal stops and (b) to describe some spectral characteristics of middorsum palatal stops. Method: Maxillary arch width, length, and height dimensions and first spectral moments of…
Heliövaara, A; Pere, A; Ranta, R
1994-03-01
The body height and weight, and sizes of dental arches in 116 patients with isolated cleft palate were evaluated at 16.9-20.6 years of age. One-stage closure of the soft and hard palate had been done at a mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. The height attained in both the boys (177.6 cm) and the girls (165.7 cm) was similar to that in the general adult population, even though half of the boys had not reached their final height. The median relative weight for height and sex was 6%. There were no significant differences in dental arch measurements depending on the method of operation but the more palatal operations done the shorter the maxillary and mandibular dental arch widths. The extent of cleft made a significant difference, larger clefts having narrower palatal intercanine widths. Dental arch dimensions were consistently larger in boys than in girls.
Lv, Yan; Yan, Bin; Wang, Lin; Lou, Dong-hua
2012-04-01
To analyze the reliability of the dento-maxillary models created by cone-beam CT and rapid prototyping (RP). Plaster models were obtained from 20 orthodontic patients who had been scanned by cone-beam CT and 3-D models were formed after the calculation and reconstruction of software. Then, computerized composite models (RP models) were produced by rapid prototyping technique. The crown widths, dental arch widths and dental arch lengths on each plaster model, 3-D model and RP model were measured, followed by statistical analysis with SPSS17.0 software package. For crown widths, dental arch lengths and crowding, there were significant differences(P<0.05) among the 3 models, but the dental arch widths were on the contrary. Measurements on 3-D models were significantly smaller than those on other two models(P<0.05). Compared with 3-D models, RP models had more numbers which were not significantly different from those on plaster models(P>0.05). The regression coefficient among three models were significantly different(P<0.01), ranging from 0.8 to 0.9. But between RP and plaster models was bigger than that between 3-D and plaster models. There is high consistency within 3 models, while some differences were accepted in clinic. Therefore, it is possible to substitute 3-D and RP models for plaster models in order to save storage space and improve efficiency.
In vivo Study of the Accuracy of Dual-arch Impressions.
de Lima, Luciana Martinelli Santayana; Borges, Gilberto Antonio; Junior, Luiz Henrique Burnett; Spohr, Ana Maria
2014-06-01
This study evaluated in vivo the accuracy of metal (Smart®) and plastic (Triple Tray®) dual-arch trays used with vinyl polysiloxane (Flexitime®), in the putty/wash viscosity, as well as polyether (Impregum Soft®) in the regular viscosity. In one patient, an implant-level transfer was screwed on an implant in the mandibular right first molar, serving as a pattern. Ten impressions were made with each tray and impression material. The impressions were poured with Type IV gypsum. The width and height of the pattern and casts were measured in a profile projector (Nikon). The results were submitted to Student's t-test for one sample (α = 0.05). For the width distance, the plastic dual-arch trays with vinyl polysiloxane (4.513 mm) and with polyether (4.531 mm) were statistically wider than the pattern (4.489 mm). The metal dual-arch tray with vinyl polysiloxane (4.504 mm) and with polyether (4.500 mm) did not differ statistically from the pattern. For the height distance, only the metal dual-arch tray with polyether (2.253 mm) differed statistically from the pattern (2.310 mm). The metal dual-arch tray with vinyl polysiloxane, in the putty/wash viscosities, reproduced casts with less distortion in comparison with the same technique with the plastic dual-arch tray. The plastic or metal dual-arch trays with polyether reproduced cast with greater distortion. How to cite the article: Santayana de Lima LM, Borges GA, Burnett LH Jr, Spohr AM. In vivo study of the accuracy of dual-arch impressions. J Int Oral Health 2014;6(3):50-5.
Assessment of Soil Arching Factor for Retaining Wall Pile Foundations
DOT National Transportation Integrated Search
2017-03-31
Despite the prevalence of the soldier piles retaining wall systems as temporary and even permanent shoring systems along state highways, relatively little is known on the effect of the foreslope bench width and the slope inclination on the arching ca...
de Almeida, Araci Malagodi; Ozawa, Terumi Okada; Alves, Arthur César de Medeiros; Janson, Guilherme; Lauris, José Roberto Pereira; Ioshida, Marilia Sayako Yatabe; Garib, Daniela Gamba
2017-06-01
The purpose of this "two-arm parallel" trial was to compare the orthopedic, dental, and alveolar bone plate changes of slow (SME) and rapid (RME) maxillary expansions in patients with complete bilateral cleft lip and palate (BCLP). Forty-six patients with BCLP and maxillary arch constriction in the late mixed dentition were randomly and equally allocated into two groups. Computer-generated randomization was used. Allocation was concealed with sequentially, numbered, sealed, opaque envelopes. The SME and RME groups comprised patients treated with quad-helix and Haas/Hyrax-type expanders, respectively. Cone-beam computed tomography (CBCT) exams were performed before expansion and 4 to 6 months post-expansion. Nasal cavity width, maxillary width, alveolar crest width, arch width, palatal cleft width, inclination of posterior teeth, alveolar crest level, and buccal and lingual bone plate thickness were assessed. Blinding was applicable for outcome assessment only. Interphase and intergroup comparisons were performed using paired t tests and t tests, respectively (p < 0.05). SME and RME similarly promoted significant increase in all the maxillary transverse dimensions at molar and premolar regions with a decreasing expanding effect from the dental arch to the nasal cavity. Palatal cleft width had a significant increase in both groups. Significant buccal inclination of posterior teeth was only observed for RME. Additionally, both expansion procedures promoted a slight reduction of the alveolar crest level and the buccal bone plate thickness. No difference was found between the orthopedic, dental, and alveolar bone plate changes of SME and RME in children with BCLP. Both appliances produced significant skeletal transverse gains with negligible periodontal bone changes. Treatment time for SME, however, was longer than the observed for RME. SME and RME can be similarly indicated to correct maxillary arch constriction in patients with BCLP in the mixed dentition.
Yang, Yunqiang; Wu, Yeke; Gu, Yifei; Yang, Qijian; Shi, Bing; Zheng, Qian; Wang, Yan
2013-07-01
The objective of this study was to investigate the effects of cleft palate itself on the growth of maxilla and mandible. Fifty-two adult female patients with unoperated isolated cleft palate and 52 adult female individuals with normal occlusion were included in our study. Computer software was used for lateral cephalometry measurement. Manual measurement was performed for dental cast measurements, and sample t test analysis was applied to analyze the differences between the 2 groups using SPSS 17.0. The sella-nasion-subspinale point angle, subspinale-nasion-supramentale point angle, and maxillary arch length of the cleft group were significantly smaller than those of the control group (P < 0.01). Both maxillary and mandibular posterior dental arch widths of the cleft group were significantly larger compared with the control group (P < 0.01), whereas the sella-nasion-supramentale point angle, mandible arch length, palate height, and palate shelf inclination did not differ between the 2 groups. The measurements did not differ between the submucosal cleft and the overt cleft patients. Cleft palate itself has adverse effects on the maxilla growth with shorter maxillary arch length and wider posterior dental arch width.
Baswaraj; Hemanth, M; Jayasudha; Patil, Chandrashekhargouda; Sunilkumar, P; Raghuveer, H P; Chandralekha, B
2013-01-01
The objective of this study was to estimate the increase in arch perimeter associated with mandibular lateral expansion, To estimate the increase in intermolar width with mandibular lateral expansion and to find out the changes of tooth inclination with mandibular expansion. The mandibular bone with dentition of indian skeletal specimen was obtained. The computer tomogram (CT) slices of the mandible were taken. Finite element model (FEM): Numerical representation of the geometry was created by dividing the geometry into finite number of elements and the elements were connected together with nodes at the junction. The result of the study showed when 10° of lateral expansion was applied to the lower buccal segment at the center of rotation found at 4.3 mm below the root apex of first molar, a space of 1.3 mm between the canine and first premolar, and thus an increase in arch perimeter of 2.6 mm. The tip of the mesiolingual cusp of the first molar moved 4.2 mm laterally, resulting in a change in intermolar width by 8.4 mm. Three-dimensional simulation showed that 1 mm of intermolar expansion increased the arch perimeter by 0.30 mm. As the finite element method evolves and scientists are able to more clearly define physical properties of biological tissues, more accurate information can be generated at the level that other analytical methods cannot fully provide data.This result would be of value clinically for prediction of the effects of mandibular expansion.
Applicability of the Tanaka-Johnston and Moyers mixed dentition analyses in Northeast Han Chinese.
Sherpa, Jangbu; Sah, Gopal; Rong, Zeng; Wu, Lipeng
2015-06-01
To assess applicability of the Tanaka-Johnston and Moyers prediction methods in a Han ethnic group from Northeast China and to develop prediction equations for this same population. Cross-sectional study. Department of Orthodontics, School of Stomatology, Jiamusi University, Heilongjiang, China. A total of 130 subjects (65 male and 65 female) aged 16-21 years from a Han ethnic group of Northeast China were recruited from dental students and patients seeking orthodontic treatment. Ethnicity was verified by questionnaire. Mesio-distal tooth width was measured using Digital Vernier calipers. Predicted values were obtained from the Tanaka-Johnston and Moyers methods in both arches were compared with the actual measured widths. Based on regression analysis, prediction equations were developed. Tanaka-Johnston equations were not precise, except for the upper arch in males. However, the Moyers 85th percentile in the upper arch and 75th percentile in the lower arch predicted the sum precisely in males. For females, the Moyers 75th percentile predicted the sum precisely for the upper arch, but none of the Moyers percentiles predicted in the lower arch. Both the Tanaka-Johnston and Moyers method may not be applied universally without question. Hence, it may be safer to develop regression equations for specific populations. Validating studies must be conducted to confirm the precision of these newly developed regression equations.
Influence of sex and ethnic tooth-size differences on mixed-dentition space analysis
Altherr, Edward R.; Koroluk, Lorne D.; Phillips, Ceib
2013-01-01
Introduction Most mixed-dentition space analyses were developed by using subjects of northwestern European descent and unspecified sex. The purpose of this study was to determine the predictive accuracy of the Tanaka-Johnston analysis in white and black subjects in North Carolina. Methods A total of 120 subjects (30 males and 30 females in each ethnic group) were recruited from clinics at the University of North Carolina School of Dentistry. Ethnicity was verified to 2 previous generations. All subjects were less than 21 years of age and had a full complement of permanent teeth. Digital calipers were used to measure the mesiodistal widths of all teeth on study models fabricated from alginate impressions. The predicted widths of the canines and the premolars in both arches were compared with the actual measured widths. Results In the maxillary arch, there was a significant interaction of ethnicity and sex on the predictive accuracy of the Tanaka-Johnston analysis (P = .03, factorial ANOVA). The predictive accuracy was significantly overestimated in the white female group (P <.001, least square means). In the mandibular arch, there was no significant interaction between ethnicity and sex (P = .49). Conclusions The Tanaka-Johnston analysis significantly overestimated in females (P <.0001) and underestimated in blacks (P <.0001) (factorial ANOVA). Regression equations were developed to increase the predictive accuracy in both arches. (Am J Orthod Dentofacial Orthop 2007;132:332-9) PMID:17826601
Talebi, Maryam; Parisay, Iman; Sarraf, Ali; Mazhari, Fateme
2010-10-14
The aim of this pilot study was to evaluate equations for predicting the size of unerupted canines and premolars during the mixed dentition period in an Iranian population. This cross-sectional analysis was performed on 106 subjects (52 girls, 54 boys, aged 13-15 years). Data were obtained from dental cast by making direct measurements of the maximum mesiodistal widths of all mandibular and maxillary incisors, canines, premolars, and first molars with an electronic digital sliding caliper, with an accuracy of ± 0.02 mm and repeatability of ± 0.01 mm. The results were statistically analyzed using Student t tests, Pearson product-moment coefficients, and ANOVA tests. Correlation coefficients (r) and error variance of estimates were determined using a significance level of p<0.05. No significant differences were found between the mesiodistal tooth widths of males and females in this Iranian population. The highest correlation was between the sum of the mesiodistal width of canines and premolars in the maxilla with the mesiodistal width of the mandibular first molars and maxillary central incisors (r = 0.742). A moderate correlation was obtained in the mandible (r = 0.665). Approximations were developed to predict the size of the unerupted canines and premolars in both jaws (in the maxilla, Y = 0.740X + 14.271, or the simplified formula, Y = 3/4X + 14; for the mandibular arch, Y = 0.658X + 16.353, or the simplified formula, Y = 2/3 X + 16). The strongest correlation was found for the sum of the mesiodistal width of canines and premolars in the maxilla with the mesiodistal width of the mandibular first molars and maxillary central incisors in the maxillary analysis (r = 0.742). A moderate correlation was found in the mandible for the sum of the mesiodistal width of canines and premolars with the mesiodistal width of the mandibular first molars and maxillary central incisors (r = 0.665). The simplified equations proposed for the maxillary arch (Y = 3/4 X + 14) and for the mandibular arch (Y = 2/3 X + 16) offer an easy and practical way to predict the size of unerupted canines and premolars in the maxillary and mandibular arches of Iranian children.
Sheykhi-Dolagh, Roghaye; Saeedi, Hassan; Farahmand, Behshid; Kamyab, Mojtaba; Kamali, Mohammad; Gholizadeh, Hossein; Derayatifar, Amir A; Curran, Sarah
2015-06-01
Flexible flat foot is described as a reduction in the height of the medial longitudinal arch and may occur from abnormal foot pronation. A foot orthosis is thought to modify and control excessive pronation and improve arch height. To compare the immediate effect of three types of orthoses on foot mobility and the arch height index in subjects with flexible flat feet. A quasi-experimental study. The dorsal arch height, midfoot width, foot mobility and arch height index were assessed in 20 participants with flexible flat feet (mean age = 23.2 ± 3 years) for three different foot orthosis conditions: soft, semi-rigid and rigid University of California Biomechanics Laboratory (UCBL). Maximum midfoot width at 90% with arch mobility in the coronal plane was shown in the semi-rigid orthosis condition. The semi-rigid orthosis resulted in the highest mean foot mobility in 90% of weight bearing, and the rigid orthosis (UCBL) had the lowest mean foot mobility. The soft orthosis resulted in foot mobility between that of the rigid and the semi-rigid orthosis. UCBL orthosis showed the highest arch height index, and the semi-rigid orthosis showed the lowest mean arch height index. Due to its rigid structure and long medial-lateral walls, the UCBL orthosis appears to limit foot mobility. Therefore, it is necessary to make an orthosis that facilitates foot mobility in the normal range of the foot arch. Future studies should address the dynamic mobility of the foot with using various types of foot orthoses. Although there are many studies focussed on flat foot and the use of foot orthoses, the mechanism of action is still unclear. This study explored foot mobility and the influence of foot orthoses and showed that a more rigid foot orthosis should be selected based on foot mobility. © The International Society for Prosthetics and Orthotics 2014.
de Medeiros Alves, Arthur César; Garib, Daniela Gamba; Janson, Guilherme; de Almeida, Araci Malagodi; Calil, Louise Resti
2016-09-01
The purpose of this study was to compare the dentoalveolar effects of slow (SME) and rapid (RME) maxillary expansions in patients with complete bilateral cleft lip and palate (BCLP). A sample of 50 patients with BCLP and maxillary arch constriction was randomly and equally allocated into two groups. Group SME comprised patients (mean age of 8.8 years) treated with quad-helix appliance. Group RME comprised individuals (mean age of 8.9 years) treated with Hyrax expander. Digital dental models obtained immediately pre-expansion (T1) and 6 months after the active expansion period (T2) were used for measuring maxillary dental arch widths, arch perimeter, arch length, palatal depth, buccolingual inclination of posterior teeth and differential amount of expansion accomplished at the canine and molar regions. Inter-phase and intergroup comparisons were performed using paired t tests and t tests, respectively (p < 0.05). SME and RME caused significant increase of arch widths and arch perimeter. Arch length and palatal depth decreased nonsignificantly with SME but significantly with RME. Buccal tooth inclination was significant only for maxillary deciduous canines in both groups. The quad-helix appliance showed a significant differential expansion between anterior and posterior regions. No differences were observed between SME and RME for all variables. Differences were not found between the dentoalveolar effects of SME and RME in patients with BCLP. SME demanded a greater therapy time compared to RME. Both expansion procedures can be similarly indicated to correct maxillary arch constriction in patients with BCLP in the mixed dentition.
Prasad, Singamsetty E.R.V.; Indukuri, Ravikishore Reddy; Singh, Rupesh; Nooney, Anitha; Palagiri, Firoz Babu; Narayana, Veera
2014-01-01
Background: A thorough knowledge of the salient features of malocclusion helps the clinician in arriving at a proper diagnosis and treatment plan, and also to predict the prognosis, prior to the onset of treatment process. Among the four classes of Angle's classification of malocclusion, Class II division 2 occurs with the least frequency. There is still continuing debate in the literature whether the Class II division 2 patients ascribe the pathognomonic skeletal and dental features. Aim of the study: The aim of this study is to describe the unique features of Angle's Class II division 2 malocclusion to differentiate it from Angle's Class II division 1 malocclusion. Materials and Methods: A total of 582 pre-treatment records (study models and cephalograms), with the age of patients ranging from 15 to 22 years, were obtained from the hospital records of Vishnu Dental College, Bhimavaram and Geetam's Dental College, Visakhapatnam. Out of these, 11 pre-treatment records were excluded because of lack of clarity. In the rest of the sample, 283 were Class II division 1 and 288 were Class II division 2. The lateral cephalograms were analyzed by using digiceph and the arch width analysis was done based on the anatomical points described by Staley et al. and Sergl et al. Results: An intergroup evaluation was done by using unpaired Student's “t” test. The skeletal vertical parameters, dental parameters, and the maxillary arch width parameters revealed a statistically significant difference between the two groups of malocclusion. Conclusion: Angle's Class II division 2 malocclusion has a pronounced horizontal growth pattern with decreased lower anterior facial height, retroclined upper anteriors, and significantly increased maxillary arch width parameters. PMID:25558449
Antonarakis, Gregory S; Adibfar, Alex; Tompson, Bryan D; Paedo, D; Daskalogiannakis, John; Fisher, David M
2015-05-01
To investigate associations between anthropometric lip measurements and dental arch relationships in patients with complete unilateral cleft lip and palate (CUCLP). Retrospective cross-sectional study. Children with CUCLP. Anthropometric lip measurements, made immediately prior to lip repair, were available for each patient. The dental arch relationships were evaluated on dental study casts (8.6 ± 0.9 years) taken prior to any orthodontic treatment and prior to alveolar bone graft, using the modified Huddart and Bodenham (MHB) scoring system. The presence of associations between anthropometric lip measurements and dental arch relationships was determined using linear regression analysis. In the 63 patients included in the study, the cleft lateral lip element was deficient in height in 87% and in transverse width in 86% of patients. Patients with more deficient cleft-side lateral lip height were more likely to present with more negative MHB scores (r = .443; P < .001). Conversely, patients with more deficient cleft-side lateral lip transverse width more often presented with more positive MHB scores (r = .281; P = .025). In patients with CUCLP, there is a wide variability in the degree of deficiency of the cleft-side lateral lip element, both in the vertical and in the transverse dimension. The extent of this deficiency may, in part, predict the resulting dental arch relationships.
Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N
2017-11-01
To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Raucci, Gaetana; Pachêco-Pereira, Camila; Elyasi, Maryam; d'Apuzzo, Fabrizia; Flores-Mir, Carlos; Perillo, Letizia
2017-03-01
To identify which dental and/or cephalometric variables were predictors of postretention mandibular dental arch stability in patients who underwent treatment with transpalatal arch and lip bumper during mixed dentition followed by full fixed appliances in the permanent dentition. Thirty-one patients were divided into stable and relapse groups based on the postretention presence or absence of relapse. Intercuspid, interpremolar, and intermolar widths; arch length and perimeter; crowding; and lower incisor proclination were evaluated before treatment (T0), after lip bumper treatment (T1), after fixed appliance treatment (T2), and a minimum of 3 years after removal of the full fixed appliance (T3). Logistic regression analyses were performed to evaluate the effect of changes between T0 and T1, as predictive variables, on the occurrence of relapse at T3. The model explained 53.5 % of the variance in treatment stability and correctly classified 80.6 % of the sample. Of the seven prediction variables, intermolar and interpremolar changes between T0 and T1 (P = .024 and P = .034, respectively) were statistically significant. For every millimeter of increase in intermolar and interpremolar widths there was a 1.52 and 2.70 times increase, respectively, in the odds of having stability. There was also weak evidence for the effect of sex (P = .047). The best predictors of an average 4-year postretention mandibular dental arch stability after treatment with a lip bumper followed by full fixed appliances were intermolar and interpremolar width increases during lip bumper therapy. The amount of relapse in this crowding could be considered clinically irrelevant.
El-Kassaby, Marwa Abdelwahab; Abdelrahman, Noha Ibrahim; Abbass, Islam Tarek
2013-01-01
Objectives: The aim of the current study was to investigate how bilateral cleft lip and palate (BCLP) cases responded differently to presurgical orthopedics (PSO) and primary lip repair (LR) based on premaxillary characteristics. We suggest a clinically oriented descriptive classification for BCLP based on premaxillary characteristics. Design and Setting: A retrospective longitudinal comparative study where available records of all non-syndromic patients with complete BCLP attending the Cleft Clinic, affiliated to the Oral and Maxillofacial Surgery department, Ain-Shams University, Cairo, Egypt were assessed. Sample Population and Methodology: Twenty-two cases were collected over a 4-years period from 2008 to 2011 (15 boys and 7 girls). Model assessment was performed for serial models representing four stages of treatment; M1: Prior to start of PSO, M2: At the end of PSO, M3: One month after LR, M4: Three months after LR. The premaxillary and vomerine widths were measured on M1. Models (M1-M4) were assessed for changes in anteroposterior projection, anterior arch width, intercanine width and posterior arch width and results were statistically analyzed. Intra-and postoperative surgical findings during and after primary LR were recorded. The sample was divided into two groups based on the premaxillary size and characteristics; Group R: Rudimentary premaxilla and Group P: Prominent premaxilla. Results: There was a highly significant difference in premaxillary width between the two groups (P = 0.00), changes in anteroposterior projection of the premaxilla were significant one and three months after LR. Changes in maxillary anterior arch width, intercanine and posterior arch widths were non-significant between groups. Mean age difference between the two groups was only statistically significant at the stage of LR. Surgical differences were noted between the two groups. Postoperatively as compared to group R; group P showed more premaxillary bulge and show at rest, as well as more prolabial stretching. In addition, facial profile was more convex in group P. Conclusion: The two types of BCLP outlined in this study are different from several aspects, and hence management should be modified according to each case. This descriptive classification provides a useful tool for evaluation and planning of patients with BCLP. PMID:23662253
Hoffmannova, E; Moslerová, V; Dupej, J; Borský, J; Bejdová, Š; Velemínská, J
2018-06-01
This prospective morphometric study evaluated the growth of the upper dental arch in UCLP patients after early neonatal cheiloplasty and compared the selected dimensions with published data on non-cleft controls and on later operation protocol patients. The sample comprised 36 Czech children with nonsyndromic complete UCLP (cUCLP) and 20 Czech children with nonsyndromic incomplete UCLP (UCLP + b). 2-D and 3-D analyses of palatal casts were made at two time points: before neonatal cheiloplasty at the mean age of 3 days (±1 day), and 10 months after surgery at the mean age of 10 months (±1 month). The upper dental arch of cUCLP and UCLP + b patients showed similar developmental changes, but the cleft type influenced growth significantly. The initial high shape variability in cUCLP patients diminished after 10 months, and approached the variability in UCLP + b patients. Both the width and length dimensions increased after surgery. Important growth concerned the anterior ends of both segments. The width and length dimensions illustrated similar growth trends with non-cleft controls and UCLP patients who underwent later cheiloplasty. Early neonatal cheiloplasty caused no reduction in the length or width dimensions during the first year of life. Our data suggest a reconstructed lip has a natural formative effect on the actively growing anterior parts of upper dental arch segments, which cause narrowing of the alveolar cleft. Copyright © 2018 Elsevier B.V. All rights reserved.
Trang, Vu Thi Thu; Park, Jae Hyun; Bayome, Mohamed; Shastry, Shruti; Mellion, Alex; Kook, Yoon-Ah
2015-01-01
The purpose of this study was to investigate the three-dimensional (3D) morphologic differences in the mandibular arch of Vietnamese and North American White subjects. The sample included 113 Vietnamese subjects (41 Class I, 37 Class II and 35 Class III) and 96 White subjects (29 Class I, 30 Class II and 37 Class III). The samples were regrouped according to arch form types (tapered, ovoid, and square) to compare the frequency distribution of the three arch forms between ethnic groups in each angle classification. The facial axis point of each tooth was digitized on 3D virtual models. Four linear and two ratio variables were measured. In comparing arch dimensions, the intercanine and intermolar widths were wider in Vietnamese than in Whites (p < 0.001, p = 0.042, respectively). In the White group, there was even frequency distribution of the three arch forms. However, in the Vietnamese group, the square arch form was the most frequent followed by tapered and ovoid arch forms. The arch forms of Whites were narrower than Vietnamese. In North American Whites, the distribution of the arch form types showed similar frequency. In Vietnamese, the square arch form was more frequent.
Effect of lip bumpers on mandibular arch dimensions.
Hashish, Dena Ibrahim; Mostafa, Yehya Ahmed
2009-01-01
The aim of this systematic review was to examine the effects of lip bumper therapy on mandibular arch dimensions. A literature survey of PubMed, EMBASE, Cochrane Central, and Cochrane Database of Systematic Reviews (www.cochrane.org) was conducted from December 1968 to January 2007. Human studies, randomized clinical trials, prospective and retrospective studies, and studies discussing the effect of lip bumpers on the arch and teeth were included. Two reviewers independently selected and extracted the data. Of the 52 studies found in the search, only 1 met the inclusion criteria. The results showed increases in arch dimensions that included an increase in arch length. This was attributed to incisor proclination, distalization, and distal tipping of the molars. There was also an increase in the arch width seen in the intercanine and deciduous intermolar and premolar distances. The long-term stability of the effects of the lip bumper need to be elucidated.
The influence of the lateral pharyngeal wall anatomy on snoring and sleep apnoea.
Korhan, Ibrahim; Gode, Sercan; Midilli, Rasit; Basoglu, Ozen Kacmaz
2015-02-01
To elucidate the variations of the lateral pharyngeal wall anatomy on physical examination and to assess the clinical importance of the examination of the lateral pharyngeal wall on the presence and severity of obstructive sleep apnoea syndrome. The cross-sectional study was conducted at Ege University Medical School, Izmir, Turkey, between May 2010 and April 2011. The patients were divided into four equal groups: Group 1--snoring without apnoea (age 20-40); Group 2--snoring without apnoea (age 40-60); Group 3--apnoea-hypopnoea index < 5/hr; Group 4: apnoea-hypopnoea index > 30/hr. Calibrated oropharynx pictures were taken. Distance between palatoglossal and palatopharyngeal arches, height of palatoglossal and palatopharyngeal arches, uvula width, uvula length and distance between tonsils were measured. SPSS 17 was used for statistical analysis. Of the 80 patients in the study, 44 (55%) were men. Mean distance between palatopharyngeal and palatoglossal arches were 1.55 ± 0.34 cm and 2.70 ± 0.43 cm respectively. Mean height of palatopharyngeal and palatoglossal arches were 0.60 ± 0.21 cm and 1.37 ± 0.36 cm respectively (p > 0.05). Mean uvula width and uvula length were 0.80 ± 0.12cm and 1.25 ± 0.27 cm respectively (p > 0.05). Mean distance between tonsils was 2.24 ± 0.56 cm (p > 0.05). Distance between palatopharyngeal arches was significantly different between groups 3 and 4 (p < 0.05). Palatopharyngeal arch anatomy was found to be significantly associated with obstructive sleep apnoea syndrome severity, especially in patients with normal or small tonsil size. Patients with the palatopharyngeal arches, which narrow the oropharyngeal inlet more than the tonsils, should further be investigated with polysomnography.
Chen, Hui; Lowe, Alan A; de Almeida, Fernanda Riberiro; Fleetham, John A; Wang, Bangkang
2008-09-01
Oral appliances (OAs) are widely prescribed for the treatment of obstructive sleep apnea (OSA). The occlusal changes that occur after long term OA treatment have not been well described based on detailed computerized three-dimensional (3D) assessment. Seventy patients with OSA (mean age, 50.0 years) who had been treated with an OA were identified for this study. A MicroScribe-3DX dental study model analysis system was used to make 3D measurements on baseline and follow-up (88.4 +/- 26.7 months) study models. The following dental measurements showed significant changes (P <0.05) with long-term use of an OA: mandibular arch width increased more than maxillary arch width, crowding decreased in both arches, the curve of Spee became flat in the premolar area, the mandibular canine to second molar segment moved forward in relation to the maxillary arch, the bite opened and the overjet decreased except in some molar areas. A variety of occlusal changes occur with long-term OA treatment for OSA. The changes could be regarded as either adverse or beneficial depending upon the baseline characteristics.
Validation of hand and foot anatomical feature measurements from smartphone images
NASA Astrophysics Data System (ADS)
Amini, Mohammad; Vasefi, Fartash; MacKinnon, Nicholas
2018-02-01
A smartphone mobile medical application, previously presented as a tool for individuals with hand arthritis to assess and monitor the progress of their disease, has been modified and expanded to include extraction of anatomical features from the hand (joint/finger width, and angulation) and foot (length, width, big toe angle, and arch height index) from smartphone camera images. Image processing algorithms and automated measurements were validated by performing tests on digital hand models, rigid plastic hand models, and real human hands and feet to determine accuracy and reproducibility compared to conventional measurement tools such as calipers, rulers, and goniometers. The mobile application was able to provide finger joint width measurements with accuracy better than 0.34 (+/-0.25) millimeters. Joint angulation measurement accuracy was better than 0.50 (+/-0.45) degrees. The automatically calculated foot length accuracy was 1.20 (+/-1.27) millimeters and the foot width accuracy was 1.93 (+/-1.92) millimeters. Hallux valgus angle (used in assessing bunions) accuracy was 1.30 (+/-1.29) degrees. Arch height index (AHI) measurements had an accuracy of 0.02 (+/-0.01). Combined with in-app documentation of symptoms, treatment, and lifestyle factors, the anatomical feature measurements can be used by both healthcare professionals and manufacturers. Applications include: diagnosing hand osteoarthritis; providing custom finger splint measurements; providing compression glove measurements for burn and lymphedema patients; determining foot dimensions for custom shoe sizing, insoles, orthotics, or foot splints; and assessing arch height index and bunion treatment effectiveness.
Zhu, Yanfei; Li, Jiaying; Tang, Yanmei; Wang, Xiaoling; Xue, Xiaochen; Sun, Huijun; Nie, Ping; Qu, Xinhua; Zhu, Min
2016-09-01
Children with severe airway obstruction tend to have a vertical direction of growth, class II malocclusion, and narrow arches. Adenoidectomy and tonsillectomy were recommended for the promotion of balanced dentition growth in these children.The aim of this study was to determine the effect of adenoidectomy and tonsillectomy on the growth of dental morphology in children with airway obstruction. A comprehensive search of the Medline, Embase, Web of science, and OVID databases for studies published through to January 17, 2016 was conducted. Prospective, comparative, clinical studies assessing the efficacy of adenoidectomy, or tonsillectomy in children with airway obstruction were included. The weighted mean difference (WMD) and 95% confidence interval (CI) were used for continuous variables. Forest plots were drawn to demonstrate effects in the meta-analyses. Eight papers were included in our study. We found that adenoidectomy and tonsillectomy led to a significant change in nasal-breathing in children with airway obstruction. Children with airway obstruction had a significantly narrower posterior maxillary dental arch than children without airway obstruction (WMD = -0.94, 95% CI [-1.13, -0.76]; P < 0.001). After surgery, these children still had a significantly narrower dental arch than the nasal-breathing children (WMD = -0.60, 95% CI [-0.79, -0.42]; P < 0.001). In terms of dental arch width, malocclusion, palatal height, overjet, overbite, dental arch perimeter, and arch length, a tendency toward normalization was evident following adenoidectomy or tonsillectomy, with no significant differences evident between the surgical group and the normal group. The small number of studies and lack of randomized controlled trials were the main limitations of this meta-analysis. Following adenoidectomy and tonsillectomy, the malocclusion and narrow arch width of children with airway obstruction could not be completely reversed. Therefore, other treatments such as functional training or orthodontic maxillary widening should be considered after removing the obstruction in the airway.
The boomerang osteotomy -- a new method of reduction malarplasty.
Nakanishi, Yuji; Nagasao, Tomohisa; Shimizu, Yusuke; Miyamoto, Junpei; Kishi, Kazuo; Fukuta, Keizo
2012-05-01
To achieve optimal outcomes in reduction malarplasty, it is important to preserve the natural curvature of the cheek while reducing the zygoma prominence and the width of the midface. The present article introduces an effective technique that aims to achieve these purposes. Through an intraoral approach, boomerang-shaped bone incision lines are marked on the anterior aspect of the zygomatico-maxillary junction. The lines are placed medial to the most prominent part of the zygoma. The zygomatic arch is divided at its posterior part through a small incision made in the pre-auricular region. By performing these manoeuvres, a unit of bone-composed of a part of the zygoma body and zygomatic arch - is mobilised. The mobilised bone is shifted medially, reducing the width of the midface and making the zygoma region less prominent. After performing reduction malarplasty for 89 patients (10 males and 79 females) using this technique, clinical outcomes were evaluated. Outcomes of the treatment was optimal, with over 80% of the patients evaluating the results as excellent in terms of effectiveness in malar prominence, facial width and symmetry. Because the continuity of the main part of the zygoma body and zygomatic arch is preserved in our technique, medial transfer of the zygoma is enabled while preserving the natural curvature of the malar region and the superior-inferior position of the zygomatic arch. Because of these advantages, we recommend our technique as an effective technique of reduction malarplasty. Copyright © 2012 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Cornwall, Mark W; McPoil, Thomas G; Fair, Austin
2014-10-01
No evidence exits regarding the magnitude of the change in foot posture following the "modified reverse-6" (MR6) taping procedure, either alone or in combination with the "low-dye" (LD) taping technique. The purpose of this study was to investigate the change in the height and width of the midfoot after application of the MR6 and the MR6 plus the LD (MR6+LD) taping technique and determine how long those changes last. Eleven individuals (2 female and 9 male) were recruited for this study and were tested under each of two experimental conditions, the MR6 and the MR6+LD taping technique. The order of testing for the two conditions was randomly determined. For each condition, the height and width of the midfoot at 50% of each subject's foot length was initially measured and then again immediately following the application of the tape. These measurements were repeated four hours later immediately prior to running two miles on a treadmill, again immediately after running, and finally after another four hours. The dorsal arch height increased significantly with both the MR6 and MR6+LD taping, but only the MR6+LD remained statistically greater after four hours, a bout of exercise and again at the end of the day. The mean width of the midfoot significantly decreased with both taping procedures. The change in the width of the midfoot remained significantly decreased in both taping conditions after exercise and throughout the day. Both taping procedures are able to significantly change the height and width of the medial longitudinal arch of the foot, but the change lasted longer when the two taping procedures were combined. Level 3, Prospective Cohort Study.
Aydın, Burcu; Şenışık, Neslihan Ebru; Koşkan, Özgür
2018-05-01
The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi (27℃) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. No statistically significant difference was observed between NiTi and CuNiTi according to LII ( p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group ( p < 0.001). Inter-first premolar width showed a statistically significant interaction in week × diameter × application ( p < 0.05). The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.
Influence of shovel-shaped incisors on the dental arch crowding in Mongolian females.
Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsukada, Shin-ichi; Uzuka, Satoshi; Nakahara, Rizako; Nakahara, Sen
2009-08-01
The aim of this study was to investigate the influences of shovel-shaped incisors on the dental arch crowding in the samples of modern young female adult Mongolians (belonging to the Khalkha-Mogol grouping) ranged between 18.5 and 25.0 years, with a mean age of 20.7 years. Materials in this study comprised of 33 dental casts. Plaster replicas of the A.S.U. system plaques were used to facilitate standardization in scoring and classify shoveling regarding both upper central and lateral incisors. Dimensions of the dental arch namely, overjet, overbite, arch depth, arch width and irregularity index were measured. The correlation between the shovel shape of the central incisor and the lateral incisor was highly significant. Significantly relations were found between the grades of shoveling and the mesiodistal diameters of upper first molars and lower incisors. Positive correlation was admitted between the shoveling and upper arch depth anterior, and upper arch depth. It may be considered that the grades of shoveling are indirectly related with upper and/or lower anterior crowding. Although crowding is looks like an expression of disharmony between teeth and alveolar arch, it may be caused by multiple etiologic factors interacted directly and/or indirectly.
Gan, Ning; Xiong, Yaoyang; Jiao, Ting
2016-01-01
Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p<0.001). Precision of digital impressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions). It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral digital impression. It should be confirmed in further studies that whether accuracy of digital impressions for whole upper jaws is clinically acceptable.
A Foot-Arch Parameter Measurement System Using a RGB-D Camera.
Chun, Sungkuk; Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook
2017-08-04
The conventional method of measuring foot-arch parameters is highly dependent on the measurer's skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were -0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system.
A Foot-Arch Parameter Measurement System Using a RGB-D Camera
Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook
2017-01-01
The conventional method of measuring foot-arch parameters is highly dependent on the measurer’s skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were −0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system. PMID:28777349
Jiang, Jin-Gang; Zhang, Yong-De
2013-03-01
The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.
de Almeida, Marcio Rodrigues; Futagami, Cristina; Conti, Ana Cláudia de Castro Ferreira; Oltramari-Navarro, Paula Vanessa Pedron; Navarro, Ricardo de Lima
2015-01-01
OBJECTIVE: The aim of the present study was to compare dentoalveolar changes in mandibular arch, regarding transversal measures and buccal bone thickness, in patients undergoing the initial phase of orthodontic treatment with self-ligating or conventional bracket systems. METHODS: A sample of 25 patients requiring orthodontic treatment was assessed based on the bracket type. Group 1 comprised 13 patients bonded with 0.022-in self-ligating brackets (SLB). Group 2 included 12 patients bonded with 0.022-in conventional brackets (CLB). Cone-beam computed tomography (CBCT) scans and a 3D program (Dolphin) assessed changes in transversal width of buccal bone (TWBB) and buccal bone thickness (BBT) before (T1) and 7 months after treatment onset (T2). Measurements on dental casts were performed using a digital caliper. Differences between and within groups were analyzed by Student's t-test; Pearson correlation coefficient was also calculated. RESULTS: Significant mandibular expansion was observed for both groups; however, no significant differences were found between groups. There was significant decrease in mandibular buccal bone thickness and transversal width of buccal bone in both groups. There was no significant correlation between buccal bone thickness and dental arch expansion. CONCLUSIONS: There were no significant differences between self-ligating brackets and conventional brackets systems regarding mandibular arch expansion and changes in buccal bone thickness or transversal width of buccal bone. PMID:26154456
Ozdinc, Sevgi Anar; Turan, Fatma Nesrin
2016-07-01
To investigate the effects of ballet training on foot structure and the formation of the medial longitudinal arc in childhood, and the association of body mass index with structural change secondary to ballet training. This study was conducted at Öykü Ballet and Dance School and Trakya University, Edirne, Turkey, from September 2007 to November 2008, and comprised girl students who were taking ballet classes, and a group of those who were not taking such who acted as the controls. Static footprints of both feet of all participants were taken with an ink paedogram. Parameters evaluated from footprints included foot length, metatarsal width, heel width and medial longitudinal arch. The relationship between the parameters, the ballet starting age, training duration and body mass index was investigated. Of the 67 participants, there were 36(53.7%) in the experimental group and 31(48.3%) in the control group. The difference between age, height, weight and body mass index between the two groups was insignificant (p>0.05). The average ballet starting age was 6.47±1.55 years and duration was 4.36±2.002 years. Positive correlations were found between body mass index and foot length, metatarsal width, heel width, medial longitudinal arch contact width and halluxvalgus angle; between ballet starting age and metatarsal width, heel width; between duration of training and foot length, metatarsal width and hallux valgus angle (p?0.05 each). Evidence supporting the education in children on foot anthropometric measurements and medial longitudinal arc development could not be found.
Dental arch dimensions, form and tooth size ratio among a Saudi sample.
Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali
2018-01-01
To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton's ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p less than 0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton's anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton's overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton's ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton's anterior teeth ratio than in overall ratio.
Comparison of arch forms between Egyptian and North American white populations.
Bayome, Mohamed; Sameshima, Glenn T; Kim, Yoonji; Nojima, Kunihiko; Baek, Seung-Hak; Kook, Yoon-Ah
2011-03-01
The aim of this study was to evaluate the morphologic differences in the mandibular arches of Egyptian and North American white subjects. The sample included 94 Egyptian subjects (35 Class I, 32 Class II, and 27 Class III) and 92 white subjects (37 Class I, 29 Class II, and 26 Class III). The subjects were grouped according to arch form types (tapered, ovoid, and square) to compare their frequency distribution between ethnic groups in each Angle classification. The most facial portions of 13 proximal contact areas were digitized on scanned images of mandibular casts to estimate the corresponding clinical bracket point for each tooth. Four linear and 2 proportional measurements were taken. In comparing arch dimensions, intermolar width was narrower in Egyptians than in the whites (P = 0.001). There was an even frequency distribution of the 3 arch forms in the Egyptian group. On the other hand, the most frequent arch form was ovoid followed by tapered and square in the white group; the square arch form was significantly less frequent than the tapered and ovoid arch forms (P = 0.029). The arch forms of Egyptians are narrower than those of whites. The distribution of the arch form types in Egyptians showed similar frequency, but the square arch form was less frequent in whites. It is recommended to select narrower archwires from the available variations to suit many Egyptian patients. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders.
Heliövaara, Arja
2011-01-01
To evaluate maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders and to compare their dental arch dimensions with age- and sex-matched controls without speech disorders. Fifty-two children (15 girls) with errors in the articulation of the sounds /r/, /s/ or /l/ were compared retrospectively with age- and sex-matched controls from dental casts taken at a mean age of 6.4 years (range 5.0-8.4). All children with articulatory speech disorders had been referred to City of Helsinki Health Care, Dental Care Department by a phoniatrician or a speech therapist in order to get oral-motor activators (removable palatal plates) to be used in their speech therapy. A χ2-test and paired Student's t tests were used in the statistical analyses. The children with articulatory speech disorders had similar maxillary dental arch widths but smaller maxillary dental arch length than the controls. This small series suggests that 6-year-old children with articulatory speech disorders may have decreased maxillary dental arch length. Copyright © 2011 S. Karger AG, Basel.
Mandibular arch form: the relationship between dental and basal anatomy.
Ronay, Valerie; Miner, R Matthew; Will, Leslie A; Arai, Kazuhito
2008-09-01
We investigated mandibular dental arch form at the levels of both the clinically relevant application points of the orthodontic bracket and the underlying anatomic structure of the apical base. The correlation of both forms was evaluated and examined to determine whether the basal arch could be used to derive a standardized clinical arch form. Thirty-five mandibular dental casts (skeletal and dental Class I) were laser scanned, and a 3-dimensional virtual model was created. Two reference points (FA, the most prominent part of the central lobe on each crown's facial surface, and WALA, a point at the height of the mucogingival junction) were selected for each tooth from the right to the left first molars. The FA and WALA arch forms were compared, and the distances between corresponding points and intercanine and intermolar widths were analyzed. Both arch forms were highly individual and the tooth values scattered. Nevertheless, a highly significant relationship between the FA and WALA curves was found, especially in the canine (0.75) and molar (0.87) areas. Both FA and WALA point-derived arch forms were individual and therefore could not be defined by a generalized shape. WALA points proved to be a useful representation of the apical base and helpful in the predetermination of an individualized dental arch form.
Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa; Kim, Sang-Cheol
2016-09-01
The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.
Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa
2016-01-01
Objective The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. Results All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars. PMID:27668191
Artmann, L; Larsen, H J; Sørensen, H B; Christensen, I J; Kjaer, I
2010-06-01
To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases. Size: On dental casts from 69 patients (mean age 13 years 6 months) the mesiodistal widths of each premolar, canine and incisor were measured and compared with normal standards. Dental deviations: Based on panoramic radiographs from the same patients the dentitions were grouped accordingly: Group I: normal morphology; Group IIa: deviations in the dentition within the maxillary incisors only; Group IIb: deviations in the dentition in general. Descriptive statistics for the tooth sizes and dental deviations were presented by the mean and 95% confidence limits for the mean and the p-value for the T-statistic. Space: Space was expresses by subtracting the total tooth sizes of incisors, canines and premolars from the length of the arch segments. Size of lateral maxillary incisor: The widths of the lateral incisors were significantly different in groups I, IIa and IIb (p=0.016) and in cases with labially located ectopic canines on average 0.65 (95% CI:0.25-1.05, p=0.0019) broader than lateral incisors in cases with palatally located ectopic canines. Space: Least available space was observed in cases with labially located canines. The linear model did show a difference between palatally and labially located ectopic canines (p=0.03). Space related to deviations in the dentition: When space in the dental arch was related to dental deviations (groups I, IIa and IIb), the cases in group IIb with palatally located canines had significantly more space compared with I and IIa. Two subgroups of palatally located ectopic maxillary canine cases based on registration of space, incisor width and deviations in the morphology of the dentition were identified.
Dynamic Numerical Analysis of Steel Footbridge
NASA Astrophysics Data System (ADS)
Major, Maciej; Minda, Izabela; Major, Izabela
2017-06-01
The study presents a numerical analysis of the arched footbridge designed in two variants, made of steel and aluminium. The first part presents the criteria for evaluation of the comfort of using the footbridges. The study examined the footbridge with arched design with span in the axis of 24 m and width of 1.4 m. Arch geometry was made as a part of the circle with radius of r = 20 m cut off with a chord with length equal to the calculation length of the girders. The model of the analysed footbridge was subjected to the dynamic effect of wind and the pedestrian traffic with variable flexibility. The analyses used Robot Structural Analysis software.
Relationship between vertical facial patterns and dental arch form in class II malocclusion.
Grippaudo, Cristina; Oliva, Bruno; Greco, Anna Lucia; Sferra, Simone; Deli, Roberto
2013-11-07
The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients. A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis. A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P<0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position. The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.
Evaluation of validity of Tanaka-Johnston analysis in Mumbai school children.
Hambire, Chaitali Umesh; Sujan, Sunanda
2015-01-01
Estimation of the mesiodistal dimensions of the unerupted canines and premolars in the early mixed dentition is a necessary diagnostic aid in space management. Tanaka-Johnston analysis was developed for North American children. Anthropological study reveals that tooth size varies among different ethnicities. The present study was performed to evaluate the validity of Tanaka-Johnston method of mixed dentition arch analysis in Mumbai school children. (1) To determine the correlation between the sum of the mesiodistal widths of the permanent mandibular incisors and combined mesiodistal widths of the permanent mandibular and maxillary canines and premolar in Mumbai school children. (2) To examine the applicability of Tanaka-Johnston method of prediction. Dental casts of maxillary and mandibular arches of 300 children, 147 boys and 153 girls within the age group of 12-15 years, with permanent dentitions were fabricated. The mesiodistal crown dimensions of teeth were measured with a dial caliper. Tanaka-Johnston method of mixed dentition arch analysis was performed for the study population, and statistical analysis was done. Descriptive statistics including the mean, standard deviation, range, and standard error were calculated and tabulated. Tanaka-Johnston's equation when applied to the data available for Mumbai school children, it was observed that it slightly overestimates the tooth size. (1) There was a positive correlation between the width of mandibular incisors and mandibular and maxillary canines and premolars. (2) The Tanaka-Johnston prediction method was not accurate for a sample of Mumbai school children.
Gan, Ning; Xiong, Yaoyang; Jiao, Ting
2016-01-01
Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p<0.001). Precision of digital impressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions). It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral digital impression. It should be confirmed in further studies that whether accuracy of digital impressions for whole upper jaws is clinically acceptable. PMID:27383409
Dental arch dimensions, form and tooth size ratio among a Saudi sample
Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali
2018-01-01
Objectives: To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton’s ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p<0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton’s anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton’s overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton’s ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton’s anterior teeth ratio than in overall ratio. PMID:29332114
Bongaarts, Catharina A M; van 't Hof, Martin A; Prahl-Andersen, Birte; Dirks, Iris V; Kuijpers-Jagtman, Anne M
2006-11-01
Evaluation of the effect of infant orthopedics on maxillary arch dimensions in the deciduous dentition in patients with unilateral cleft lip and palate. Prospective two-arm randomized controlled clinical trial with three participating cleft palate centers. Cleft palate centers of the Radboud University Nijmegen Medical Center, Academic Center of Dentistry Amsterdam, and University Medical Center Rotterdam, the Netherlands. Children with complete unilateral cleft lip and palate (n = 54) were included. Patients were randomly divided into two groups. Half of the patients (IO+) had a presurgical orthopedic plate until surgical closure of the soft palate at the age of 52 weeks; the other half (IO-) did not undergo presurgical orthopedics. Maxillary arch dimensions were assessed on dental casts at 4 and 6 years of age with measurements for arch width, arch depth, arch length, arch form, and the vertical position of the lesser segment. Contact and collapse were assessed also. There were no clinically significant differences found between IO+ and IO- for any of the variables. Infant orthopedics had no observable effect on the maxillary arch dimensions or on the contact and collapse scores in the deciduous dentition at the ages of 4 and 6 years. Considering the Dutchcleft results to date, there is no need to perform infant orthopedics for unilateral cleft lip and palate patients.
Comparisons of foot anthropometry and plantar arch indices between German and Brazilian children.
Sacco, Isabel C N; Onodera, Andrea N; Bosch, Kerstin; Rosenbaum, Dieter
2015-02-12
Nowadays, trades and research have become closely related between different countries and anthropometric data are important for the development in global markets. The appropriate use of anthropometry may improve wellbeing, health, comfort and safety especially for footwear design. For children a proper fit of footwear is very important, not constraining foot growth and allowing a normal development. The aim of this study was to compare the anthropometric characteristics of German and Brazilian children's feet from 3 to 10 years of age. We compared five indirect measures of two databases of children's feet. Forefoot, midfoot and rearfoot widths were measured in static footprints and the Chippaux-Smirak and Staheli indices of the longitudinal arch were calculated. Brazilian children showed a significantly narrower forefoot from 5 to 10 years, wider rearfoot from 3 to 4 years, wider midfoot for 4 year-olds and narrower midfoot for 10 year-old children. Nevertheless, the Chippaux-Smirak and Staheli indices showed no group differences. The only exception was for 4 year-old Brazilian children who showed a higher Chippaux-Smirak index compared to German children (48.4 ± 17.7%; 42.1 ± 13.8%). Our study revealed anthropometric differences in absolute forefoot and rearfoot widths of German and Brazilian children, but a similar longitudinal arch development. At 4 years of age, Brazilian children present a foot anthropometry similar to the 3 year-olds and develop the plantar longitudinal arch from 4 to 5 years more rapidly when compared to German children.
Brachiomedian artery (arteria brachiomediana) revisited: a comprehensive review
Kachlik, David; Konarik, Marek; Riedlova, Jitka; Baca, Vaclav
2016-01-01
This article reviews in detail the superficial brachiomedian artery (arteria brachiomediana superficialis), a very rare variant of the main arterial trunks of the upper limb. It branches either from the axillary artery or the brachial artery, descends superficially in the arm (similar to the course of the superficial brachial artery) and continues across the cubital fossa, runs superficially in the forearm, approaches the median nerve and enters the carpal canal to reach the hand. It usually terminates in the superficial palmar arch. The first drawing was published, in 1830, and the first description was published, in 1844. Altogether, to our knowledge, only 31 cases of a true, superficial brachiomedian artery have been reported (Some cases are incorrectly reported as superficial brachioradiomedian artery or superficial brachioulnomedian artery). Based on a meta-analysis of known, available studies, the incidence is 0.23% in Caucasians and 1.48% in Mongolians. Knowing whether or not this arterial variant is present is important in clinical medicine and relevant for: The catheterization via the radial or ulnar artery; harvesting the vascular pedicle for a forearm flap based on the radial, ulnar or superficial brachiomedian arteries; the possible collateral circulation in cases of the arterial closure; and the surgical management of carpal tunnel syndrome. Its presence can elevate the danger of an injury to the superficially located variant artery or of an accidental injection. PMID:27131025
Anthropometric characteristics of feet of soldiers in the New Zealand Army.
Baxter, Marian L; Baxter, David G
2011-04-01
Lower limb and lower back injuries are prevalent within the New Zealand (NZ) Army: independently collected data shows these to be most prevalent, with on average 10% of military personnel affected by such an injury at any time. To improve the quality and appropriateness of footwear, it is essential that normative foot anthropometric data is collected from NZ Army personnel. NZ Army personnel (n = 807) were included in this study; data on foot length, circumference, width, and arch heights were collected. It was found that the NZ Army personnel had notable differences in feet anthropometry compared to an exemplary model for the NZ general population, specifically in terms of arch height. It was also found that a substantial proportion (approximately 50%) of personnel tested could not be provided with a boot that fit (mainly Maori and Pacific Island soldiers) because of a limited width range of the currently issued boot.
Comparison of two ways of altering carpal tunnel pressure with ultrasound surface wave elastography.
Cheng, Yu-Shiuan; Zhou, Boran; Kubo, Kazutoshi; An, Kai-Nan; Moran, Steven L; Amadio, Peter C; Zhang, Xiaoming; Zhao, Chunfeng
2018-06-06
Higher carpal tunnel pressure is related to the development of carpal tunnel syndrome. Currently, the measurement of carpal tunnel pressure is invasive and therefore, a noninvasive technique is needed. We previously demonstrated that speed of wave propagation through a tendon in the carpal tunnel measured by ultrasound elastography could be used as an indicator of carpal tunnel pressure in a cadaveric model, in which a balloon had to be inserted into the carpal tunnel to adjust the carpal tunnel pressure. However, the method for adjusting the carpal tunnel pressure in the cadaveric model is not applicable for the in vivo model. The objective of this study was to utilize a different technique to adjust carpal tunnel pressure via pressing the palm and to validate it with ultrasound surface wave elastography in a human cadaveric model. The outcome was also compared with a previous balloon insertion technique. Results showed that wave speed of intra-carpal tunnel tendon and the ratio of wave speed of intra-and outer-carpal tunnel tendons increased linearly with carpal tunnel pressure. Moreover, wave speed of intra carpal tunnel tendon via both ways of altering carpal tunnel pressure showed similar results with high correlation. Therefore, it was concluded that the technique of pressing the palm can be used to adjust carpal tunnel pressure, and pressure changes can be detected via ultrasound surface wave elastography in an ex vivo model. Future studies will utilize this technique in vivo to validate the usefulness of ultrasound surface wave elastography for measuring carpal tunnel pressure. Copyright © 2018 Elsevier Ltd. All rights reserved.
Three-dimensional quantitative analysis of healthy foot shape: a proof of concept study.
Stanković, Kristina; Booth, Brian G; Danckaers, Femke; Burg, Fien; Vermaelen, Philippe; Duerinck, Saartje; Sijbers, Jan; Huysmans, Toon
2018-01-01
Foot morphology has received increasing attention from both biomechanics researches and footwear manufacturers. Usually, the morphology of the foot is quantified by 2D footprints. However, footprint quantification ignores the foot's vertical dimension and hence, does not allow accurate quantification of complex 3D foot shape. The shape variation of healthy 3D feet in a population of 31 adult women and 31 adult men who live in Belgium was studied using geometric morphometric methods. The effect of different factors such as sex, age, shoe size, frequency of sport activity, Body Mass Index (BMI), foot asymmetry, and foot loading on foot shape was investigated. Correlation between these factors and foot shape was examined using multivariate linear regression. The complex nature of a foot's 3D shape leads to high variability in healthy populations. After normalizing for scale, the major axes of variation in foot morphology are (in order of decreasing variance): arch height, combined ball width and inter-toe distance, global foot width, hallux bone orientation (valgus-varus), foot type (e.g. Egyptian, Greek), and midfoot width. These first six modes of variation capture 92.59% of the total shape variation. Higher BMI results in increased ankle width, Achilles tendon width, heel width and a thicker forefoot along the dorsoplantar axis. Age was found to be associated with heel width, Achilles tendon width, toe height and hallux orientation. A bigger shoe size was found to be associated with a narrow Achilles tendon, a hallux varus, a narrow heel, heel expansion along the posterior direction, and a lower arch compared to smaller shoe size. Sex was found to be associated with differences in ankle width, Achilles tendon width, and heel width. Frequency of sport activity was associated with Achilles tendon width and toe height. A detailed analysis of the 3D foot shape, allowed by geometric morphometrics, provides insights in foot variations in three dimensions that can not be obtained from 2D footprints. These insights could be applied in various scientific disciplines, including orthotics and shoe design.
A quantitative method for defining high-arched palate using the Tcof1(+/-) mutant mouse as a model.
Conley, Zachary R; Hague, Molly; Kurosaka, Hiroshi; Dixon, Jill; Dixon, Michael J; Trainor, Paul A
2016-07-15
The palate functions as the roof of the mouth in mammals, separating the oral and nasal cavities. Its complex embryonic development and assembly poses unique susceptibilities to intrinsic and extrinsic disruptions. Such disruptions may cause failure of the developing palatal shelves to fuse along the midline resulting in a cleft. In other cases the palate may fuse at an arch, resulting in a vaulted oral cavity, termed high-arched palate. There are many models available for studying the pathogenesis of cleft palate but a relative paucity for high-arched palate. One condition exhibiting either cleft palate or high-arched palate is Treacher Collins syndrome, a congenital disorder characterized by numerous craniofacial anomalies. We quantitatively analyzed palatal perturbations in the Tcof1(+/-) mouse model of Treacher Collins syndrome, which phenocopies the condition in humans. We discovered that 46% of Tcof1(+/-) mutant embryos and new born pups exhibit either soft clefts or full clefts. In addition, 17% of Tcof1(+/-) mutants were found to exhibit high-arched palate, defined as two sigma above the corresponding wild-type population mean for height and angular based arch measurements. Furthermore, palatal shelf length and shelf width were decreased in all Tcof1(+/-) mutant embryos and pups compared to controls. Interestingly, these phenotypes were subsequently ameliorated through genetic inhibition of p53. The results of our study therefore provide a simple, reproducible and quantitative method for investigating models of high-arched palate. Copyright © 2015 Elsevier Inc. All rights reserved.
A quantitative method for defining high-arched palate using the Tcof1+/− mutant mouse as a model
Conley, Zachary R.; Hague, Molly; Kurosaka, Hiroshi; Dixon, Jill; Dixon, Michael J.; Trainor, Paul A.
2016-01-01
The palate functions as the roof of the mouth in mammals, separating the oral and nasal cavities. Its complex embryonic development and assembly poses unique susceptibilities to intrinsic and extrinsic disruptions. Such disruptions may cause failure of the developing palatal shelves to fuse along the midline resulting in a cleft. In other cases the palate may fuse at an arch, resulting in a vaulted oral cavity, termed high-arched palate. There are many models available for studying the pathogenesis of cleft palate but a relative paucity for high-arched palate. One condition exhibiting either cleft palate or high-arched palate is Treacher Collins syndrome, a congenital disorder characterized by numerous craniofacial anomalies. We quantitatively analyzed palatal perturbations in the Tcof1+/− mouse model of Treacher Collins syndrome, which phenocopies the condition in humans. We discovered that 46% of Tcof1+/− mutant embryos and new born pups exhibit either soft clefts or full clefts. In addition, 17% of Tcof1+/− mutants were found to exhibit high-arched palate, defined as two sigma above the corresponding wild-type population mean for height and angular based arch measurements. Furthermore, palatal shelf length and shelf width were decreased in all Tcof1+/− mutant embryos and pups compared to controls. Interestingly, these phenotypes were subsequently ameliorated through genetic inhibition of p53. The results of our study therefore provide a simple, reproducible and quantitative method for investigating models of high-arched palate. PMID:26772999
Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu
2017-03-01
[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study's findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait.
Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu
2017-01-01
[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study’s findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait. PMID:28356622
Prevalence of carpal fracture in Singapore.
Hey, Hwee Weng Dennis; Dennis, Hey Hwee Weng; Chong, Alphonsus Khin Sze; Sze, Alphonsus Chong Khin; Murphy, Diarmuid
2011-02-01
To determine the prevalence of carpal fracture in Singapore, to compare demographic differences between isolated scaphoid and other carpal fractures, and to identify parameters associated with multiple carpal fractures. A total of 149 patients with 162 carpal fractures seen at the National University Hospital in 2009 were enrolled into the study. We retrospectively reviewed their case records and radiographic studies. Pertinent demographic data including patient age, gender, occupation, injured wrist, dominant hand, mechanism of injury, and type of carpal fracture were then recorded and statistically analyzed. We also performed a separate analysis of isolated scaphoid versus other carpal fractures and single versus multiple carpal fractures. Patients with carpal fracture were predominantly male (132), below 40 years of age (116), and usually right hand dominant (136). The more common occupations were students (30), full-time military national servicemen (24), and construction workers (14). Most presented after a fall on an outstretched hand from standing height (81). The scaphoid was the most common single carpal fracture (99). This was followed by triquetrum (27), hamate (5), pisiform (4), lunate (2), capitate (1), and trapezium (1). No fracture of the trapezoid was encountered. Ten patients had multiple carpal fractures, of which 4 were perilunate fracture dislocations. The mean age and male/female ratio for isolated scaphoid and other carpal fractures was 26 years versus 41 years (p<.001) and 13:1 versus 4:1 (p=.036), respectively. A high-energy mechanism of injury was the only parameter associated with multiple carpal fractures (p=.009). The prevalence of carpal fracture in our population was consistent with studies performed in other countries. Military conscription was identified as an at-risk activity predisposing to carpal fracture. Isolated scaphoid and other carpal fractures exhibit different demographics in terms of age and gender, which may be related to differences in the mechanism of injury. A high-energy mechanism of injury was associated with multiple carpal fractures. Copyright © 2011 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Cerny, Milena; Marlois, Romain; Theumann, Nicolas; Bollmann, Christof; Wehrli, Laurent; Richarme, Delphine; Meuli, Reto; Becce, Fabio
2013-10-01
To determine the value of applying finger trap distraction during direct MR arthrography of the wrist to assess intrinsic ligament and triangular fibrocartilage complex (TFCC) tears. Twenty consecutive patients were prospectively investigated by three-compartment wrist MR arthrography. Imaging was performed with 3-T scanners using a three-dimensional isotropic (0.4 mm) T1-weighted gradient-recalled echo sequence, with and without finger trap distraction (4 kg). In a blind and independent fashion, two musculoskeletal radiologists measured the width of the scapholunate (SL), lunotriquetral (LT) and ulna-TFC (UTFC) joint spaces. They evaluated the amount of contrast medium within these spaces using a four-point scale, and assessed SL, LT and TFCC tears, as well as the disruption of Gilula's carpal arcs. With finger trap distraction, both readers found a significant increase in width of the SL space (mean Δ = +0.1mm, p ≤ 0.040), and noticed more contrast medium therein (p ≤ 0.035). In contrast, the differences in width of the LT (mean Δ = +0.1 mm, p ≥ 0.057) and UTFC (mean Δ = 0mm, p ≥ 0.728) spaces, as well as the amount of contrast material within these spaces were not statistically significant (p = 0.607 and ≥ 0.157, respectively). Both readers detected more SL (Δ = +1, p = 0.157) and LT (Δ = +2, p = 0.223) tears, although statistical significance was not reached, and Gilula's carpal arcs were more frequently disrupted during finger trap distraction (Δ = +5, p = 0.025). The application of finger trap distraction during direct wrist MR arthrography may enhance both detection and characterisation of SL and LT ligament tears by widening the SL space and increasing the amount of contrast within the SL and LT joint spaces. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Lardé, Hélène; Nichols, Sylvain; Babkine, Marie; Desrochers, André
2016-07-01
To determine arthroscopic approaches to the dorsal synovial compartments of the antebrachiocarpal and middle carpal joints in adult cattle, and to describe the arthroscopic intra-articular anatomy from each approach. Ex vivo study. Six fresh adult bovine cadavers. Two carpi were injected with latex and dissected to determine the ideal location for arthroscopic portals. Arthroscopy of the antebrachiocarpal and middle carpal joints of 10 carpi was then performed. The dorsolateral approach was made between the extensor carpi radialis and common digital extensor tendons. The dorsomedial approach was made medial to the extensor carpi radialis tendon, midway between the distal radius and proximal row of carpal bones (antebrachiocarpal joint) and midway between the two rows of carpal bones (middle carpal joint), with the joint in flexion. Arthroscopy of the antebrachiocarpal joint allowed visualization of the distal radius, proximal aspect of the radial, intermediate and ulnar carpal bones, and a palmar ligament located between the radius and the intermediate carpal bone. The approach to the middle carpal joint allowed visualization of the distal aspect of the radial, intermediate, and ulnar carpal bones, the proximal aspect of the fourth and fused second and third carpal bones and an interosseous ligament. The most lateral articular structures (lateral glenoid cavity of the distal radius, ulnar carpal and fourth carpal bones) were difficult to assess. Dorsal approaches to the antebrachiocarpal and middle carpal joints allowed visualization of most intra-articular dorsal structures in adult cattle. © Copyright 2016 by The American College of Veterinary Surgeons.
Torres, Hianne Miranda de; Arruda, Julyanna Jacinto de; Silva-Filho, João Manoel da; Faria, Danielle Lago Bruno de; Nascimento, Monikelly Carmo Chagas; Torres, Érica Miranda de
2017-01-01
The anatomical characteristics of permanent maxillary canines were evaluated through visual examination, periapical radiography, and cone beam computed tomography (CBCT), and measurements obtained from the images and directly on the teeth were compared. Fifty extracted human maxillary canines were classified according to the side of the mouth. The direction of root curvature and location of the apical foramen were also verified. Periapical radiographs and CBCTs of the specimens were obtained. The number of root canals was verified. Tooth length and the mesiodistal and buccopalatal widths of the root were measured directly on the specimens as well as on the radiographs and CBCTs. Data were analyzed by chi-square testing and analysis of variance (α = 0.05). All teeth-26 (52%) from the right side of the dental arch and 24 (48%) from the left-had only 1 main canal each. The apical foramen was located exactly in the root apex in 34 teeth (68%). Root curvature toward the distal side was observed in the apical third in 23 teeth (46%). There were no statistically significant differences between the canines' arch side and either the foramen location (P = 0.104) or the root curvature (P = 0.215). No statistically significant differences were found in measurements of tooth length (P = 0.669), mesiodistal root width (P = 0.517), or buccopalatal root width (P = 0.672) obtained from specimens and images. Both CBCTs and periapical radiographs were reliable for determining the tooth length, mesiodistal root width, and buccopalatal root width of maxillary canines and produced statistically similar measurements.
Mechanics of the Unusual Basilar Membrane in Gerbil
NASA Astrophysics Data System (ADS)
Kapuria, Santosh; Steele, Charles R.; Puria, Sunil
2011-11-01
The basilar membrane in gerbil differs from most other mammals, since its width and thickness show little variation from base to apex, and tympanic fiber layer in the pectinate zone forms a pronounced arch. Measurements indicate a quadratically increasing stiffness under point loading, which is contrary to the expected behavior of an arch. The plateau value has been considered to be the physiologically relevant stiffness, but it only occurs after 10-25 μm of deflection, whereas the normal physiological deflection is in the submicron range. The present work aims to resolve these contradictions by considering the mechanics of the geometric configuration.
Siphon flows in isolated magnetic flux tubes. 3: The equilibrium path of the flux tube arch
NASA Technical Reports Server (NTRS)
Thomas, John H.; Montesinis, Benjamin
1989-01-01
The arched equilibrium path of a thin magnetic flux tube in a plane-stratified, nonmagnetic atmosphere is calculated for cases in which the flux tube contains a steady siphon flow. The large scale mechanical equilibrium of the flux tube involves a balance among the magnetic buoyancy force, the net magnetic tension force due to the curvature of the flux tube axis, and the inertial (centrifugal) force due to the siphon flow along curved streamlines. The ends of the flux tube are assumed to be pinned down by some other external force. Both isothermal and adiabatic siphon flows are considered for flux tubes in an isothermal external atmosphere. For the isothermal case, in the absence of a siphon flow the equilibrium path reduces to the static arch calculated by Parker (1975, 1979). The presence of a siphon flow causes the flux tube arch to bend more sharply, so that magnetic tension can overcome the additional straightening effect of the inertial force, and reduces the maximum width of the arch. The curvature of the arch increases as the siphon flow speed increases. For a critical siphon flow, with supercritical flow in the downstream leg, the arch is asymmetric, with greater curvature in the downstream leg of the arch. Adiabatic flow have qualitatively similar effects, except that adiabatic cooling reduces the buoyancy of the flux tube and thus leads to significantly wider arches. In some cases the cooling is strong enough to create negative buoyancy along sections of the flux tube, requiring upward curvature of the flux tube path along these sections and sometimes leading to unusual equilibrium paths of periodic, sinusoidal form.
Histological studies on the triangular fibrocartilage complex of the wrist.
Benjamin, M; Evans, E J; Pemberton, D J
1990-01-01
The triangular fibrocartilage complex of the wrist was serially sectioned for routine histology. Results from eight dissecting room cadavers show that the complex is attached to hyaline cartilage on the radius via its articular disc. In contrast, the dorsal and volar radio-ulnar ligaments attach to the radius via zones of calcified and uncalcified fibrocartilage. The articular disc is thus a wide labrum that provides an articular surface for the ulna and for the carpal bones, and the radio-ulnar ligaments strengthen the attachment of the disc to the radius. Medially, the complex divides into upper and lower laminae. Arching strands of collagen fibres emerge from the upper lamina and pass through a region of highly vascular connective tissue to be attached to the ulna between the articular cartilage on the head and that at the tip of the styloid process. Much of the ulnar attachment is via zones of calcified and uncalcified fibrocartilage which blend with the adjacent articular cartilages. Such an arrangement of tissues prevents undue wear and tear at the ulnar attachment zone during pronation and supination of the forearm. The lower lamina blends with the sheath of extensor carpi ulnaris and the ulnar collateral ligament and allows the whole complex to attach to the carpal and metacarpal bones. The meniscus homologue is a region of dense irregular connective tissue with no independent histological identity. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 PMID:2272909
Influence of the thickness of the transverse carpal ligament in carpal tunnel syndrome.
Bartolomé-Villar, A; Pastor-Valero, T; Fuentes-Sanz, A; Varillas-Delgado, D; García-de Lucas, F
To determine if the thickness of the transverse carpal ligament measured by T2 axial magnetic resonance imaging actually influences the onset of carpal tunnel syndrome. 94 patients between January 2015 and June 2016, of whom 28 had carpal tunnel syndrome, underwent magnetic resonance imaging, 37 with discomfort in different carpus regions without symptoms of carpal tunnel and 29 healthy subjects. Two observers performed 3 measurements in 3 different levels, and in the 3 groups of patients. No statistically significant differences in transverse carpal ligament thickness measurements between the carpal tunnel syndrome group and the group without carpal tunnel involvement became apparent, but statistical differences between the control group and the carpal tunnel syndrome group, and between the control group and the group without involvement of the carpal tunnel were observed. In both these groups, the thickness of the transverse ligament was higher than in the control group. An increase in the thickness of the transverse ligament in was found in this study in subjects with involvement of carpal tunnel syndrome as evidenced by numerous studies in the literature. There is no certain causative factor, but rather a set of facts that make onset of the syndrome possible in a specific group of patients. Carpal tunnel syndrome is multifactorial. The thickness of the transverse ligament does not directly affect the onset of symptoms. Copyright © 2017 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.
Xu, L; Chen, F M; Wang, L; Zhang, P X; Jiang, X R
2016-04-18
To evaluate the meaning and value of high-frequency ultrasound in the diagnosis of carpal tunnel syndrome (CTS). In this study, 48 patients (unilateral hand) with CTS were analyzed. The thickness of transverse carpal ligaments at the pisiform bone was measured using high-frequency ultrasound. Open carpal tunnel release procedure was performed in the 48 CTS patients, and the thickness of transverse carpal ligaments at the hamate hook bone measured using vernier caliper under direct vision. The accuracy of thickness of transverse carpal ligaments was evaluated using high-frequency ultrasound. high-frequency ultrasound measurement of thickness of transverse carpal ligaments at the hamate hook bone and pisiform bone, and determination of the diagnostic threshold measurement index using receiver operating characteristic (ROC) curve, sensitivity and specificity were performed and the correlation between the thickness of transverse carpal ligaments and nerve conduction study (NCS) analyzed. The thickness of transverse carpal ligaments in the CTS patients were (0.42±0.08) cm (high-frequency ultrasound) and (0.41±0.06) cm (operation) at hamate hook bone, and there was no significant difference between the two ways (t=0.672, P>0.05). The optimal cut-off value of the transverse carpal ligaments at hamate hook bone was 0.385 cm, the sensitivity 0.775, and the specificity 0.788. The optimal cut-off value of the transverse carpal ligaments at the pisiform bone was 0.315 cm, the sensitivity 0.950, and the specificity 1.000. The transverse carpal ligaments thickness and wrist-index finger sensory nerve conduction velocity (SCV), wrist-middle finger SCV showed a negative correlation. High frequency ultrasound measurements of thickness of transverse carpal ligaments is a valuable method for the diagnosis of CTS.
... a passing cramp? It could be carpal tunnel syndrome. The carpal tunnel is a narrow passageway of ... three times more likely to have carpal tunnel syndrome than men. Early diagnosis and treatment are important ...
Mathers, Bryan; Agur, Anne; Oliver, Michele; Gordon, Karen
2016-12-01
The transverse carpal ligament is a major component of the carpal tunnel and is an important structure in the etiology of carpal tunnel syndrome. The current study aimed to quantify biaxial elastic moduli of the transverse carpal ligament and compare differences between sex and region (Radial and Ulnar). Biaxial testing of radial and ulnar samples from twenty-two (thirteen male, nine female) human fresh frozen cadaveric transverse carpal ligaments was performed. Elastic moduli and stiffness were calculated and compared. Biaxial elastic moduli of the transverse carpal ligament ranged from 0.76MPa to 3.38MPa, varying based on region (radial and ulnar), testing direction (medial-lateral and proximal-distal) and sex. Biaxial elastic moduli were significantly larger in the medial-lateral direction than the proximal-distal direction (P<0.001). Moduli were significantly larger ulnarly than radially (P=0.001). No significant differences due to gender were noted. The regional variations in biaxial elastic moduli of the transverse carpal ligament may help improve non-invasive treatment methods for carpal tunnel syndrome, specifically manipulative therapy. The smaller biaxial elastic moduli found in the radial region suggests that manipulative therapy should be focused on the radial aspect of the transverse carpal ligament. The trend where female transverse carpal ligaments had larger stiffness in the ulnar location than males suggests that that the increased prevalence of carpal tunnel syndrome in women may be related to an increased stiffness of the transverse carpal ligament, however further work is warranted to evaluate this trend. Copyright © 2016 Elsevier Ltd. All rights reserved.
Sonographic diagnosis of carpal tunnel syndrome: a study in 200 hospital workers*
Castro, Adham do Amaral e; Skare, Thelma Larocca; Nassif, Paulo Afonso Nunes; Sakuma, Alexandre Kaue; Barros, Wagner Haese
2015-01-01
Objective To describe the prevalence of carpal tunnel syndrome in a sample of 200 healthy hospital workers, establishing the respective epidemiological associations. Materials and Methods Two hundred individuals were submitted to wrist ultrasonography to measure the median nerve area. They were questioned and examined for epidemiological data, body mass index, carpal tunnel syndrome signs and symptoms, and submitted to the Boston carpal tunnel questionnaire (BCTQ) to evaluate the carpal tunnel syndrome severity. A median nerve area ≥ 9 mm2 was considered to be diagnostic of carpal tunnel syndrome. Results Carpal tunnel syndrome was diagnosed by ultrasonography in 34% of the sample. It was observed the association of carpal tunnel syndrome with age (p < 0.0001), paresthesia (p < 0.0001), Tinel’s test (p < 0.0001), Phalen’s test (p < 0.0001), BCTQ score (p < 0.0001), and years of formal education (p < 0.0001). Years of formal education was the only variable identified as an independent risk factor for carpal tunnel syndrome (95% CI = 1.03 to 1.24). Conclusion The prevalence of carpal tunnel syndrome in a population of hospital workers was of 34%. The number of years of formal education was the only independent risk factor for carpal tunnel syndrome. PMID:26543279
Effect of Wrist Posture on Carpal Tunnel Pressure while Typing
Rempel, David M.; Keir, Peter J.; Bach, Joel M.
2009-01-01
Long weekly hours of keyboard use may lead to or aggravate carpal tunnel syndrome. The effects of typing on fluid pressure in the carpal tunnel, a possible mediator of carpal tunnel syndrome, are unknown. Twenty healthy subjects participated in a laboratory study to investigate the effects of typing at different wrist postures on carpal tunnel pressure of the right hand. Changes in wrist flexion/extension angle (p = 0.01) and radial/ulnar deviation angle (p = 0.03) independently altered carpal tunnel pressure; wrist deviations in extension or radial deviation were associated with an increase in pressure. The activity of typing independently elevated carpal tunnel pressure (p= 0.001) relative to the static hand held in the same posture. This information can guide the design and use of keyboards and workstations in order to minimize carpal tunnel pressure while typing. The findings may also be useful to clinicians and ergonomists in the management of patients with carpal tunnel syndrome who use a keyboard. PMID:18383144
Hoxha, Saimir; Kaya-Sezginer, Ecem; Bakar-Ates, Filiz; Köktürk, Oğuz; Toygar-Memikoğlu, Ufuk
2018-02-17
The purpose of this study was to investigate the effect of semi-rapid maxillary expansion (SRME) orthodontic treatment on biomarkers and respiratory parameters in children with obstructive sleep apnea syndrome (OSAS) and maxillary transverse deficiency. Thirty children with OSAS were included in this study. Fifteen children were enrolled as control, and 15 children were subjected to SRME orthodontic treatment method for 5 months. Beside respiratory parameters, pharyngeal area, dental arch, and postero-anterior widths and the levels of OSAS biomarkers in serum and urine were measured. Pharyngeal airway space, dental arch, and postero-anterior widths were increased after SRME treatment. Sleep tests showed a decrease in the apnea-hypopnea index (AHI) after 5-month control/treatment duration. Serum kallikrein (KLK)1 levels decreased significantly in the treatment group. There was a significant increase in serum orosomucoid (ORM)2 levels and a decrease in urine perlecan levels in the control group after a 5-month follow-up. A significant negative correlation between serum ORM2, perlecan, gelsolin, and KLK1 levels and intercanin width, as well as between serum ORM2 and KLK1 levels and intermolar width, was observed. SRME treatment can be considered as a useful approach in children with OSAS. A further investigation of OSAS-related biomarkers and their relationship with sleep and orthodontic parameters is needed for providing easier and reliable modulatory strategies in the treatment of OSAS.
Mina, Morteza; Borzabadi-Farahani, Ali; Tehranchi, Azita; Nouri, Mahtab; Younessian, Farnaz
2017-04-01
The aim of this study was to assess the dental arch curvature in subjects with normal occlusion in an Iranian population and propose a beta function formula to predict maxillary arch form using the mandibular intermolar widths (IMW) and intermolar depths (IMD). The materials used were study casts of 54 adolescents with normal occlusion and mean age of 14.1 years (25 males, 29 females, age range 12-16 years). Curve-fitting analyses were carried out and the curves passing through the facial-axis point of the canines, premolars, first molars, and the incisal edges of the anterior teeth were studied using a 3D laser scanner. Using the measured IMW and IMD of the dental arches at the maxillary and mandibular first molar region, a beta function formula proposed for predicting maxillary arch form. The accuracy of the proposed formula was assessed on 10 randomly selected dental casts. The mean (SD) of the maxillary and mandibular IMW and IMD were 57.92 (4.75), 54.19 (5.31), and 31.59 (2.90) and 28.10 (2.59) mm, respectively. There was no gender dimorphism (P > 0.05) for both variables (IMW, IMD). There was a strong positive association (n = 10, Pearson r = 0.98, P < 0.05) between the measured (actual) maxillary arch length and proposed arch length derived from generated formula. The goodness of fit (whole arch) for the proposed beta function formula, using adjusted r square measure and root mean square in 10 patients averaged 0.97 and 1.49 mm, respectively. The corresponding figures for the maxillary anterior arch (canine to canine) were 0.90 and 0.92 mm, respectively. The proposed beta function formula used for predicting maxillary arch form based on two mandibular measures (IMW, IMD) was found to have a high accuracy for maxillary arch prediction in the Iranian population and may be used as a guide to fabricate customized arch wires or as an aid in maxillary reconstructive surgery.
Wang, Yan-jie; Wang, Shi-gang; Miao, Shu-juan; Su, Xia
2011-06-01
To investigate the effects of open reduction by palm side for the distal radius fracture and T shape plate internal fixation with simultaneous anterior transverse carpal ligament resection for the prevention of delayed carpal tunnel syndrome after operation. From March 2000 to March 2007, 32 patients (8 males and 24 females, ranging in age from 46 to 66 years) with distal radius fracture were treated with open reduction by palm side and T shape plate internal fixation with simultaneous anterior transverse carpal ligament resection; while 30 patients (7 males and 23 females,ranging in age from 45 to 65 years) only with open reduction by palm side and T shape plate internal fixation. The incidences of delayed carpal tunnel syndrome between the two groups were compared. Among 32 patients treated with open reduction by palm side and T shape plate internal fixation with anterior transverse carpal ligament resection, 3 patients had delayed carpal tunnel syndrome; while in 30 patients treated with open reduction by palm side and T shape plate internal fixation, 10 patients had delayed carpal tunnel syndrome. There was significant statistically difference (P < 0.05%). Simultaneous anterior transverse carpal ligament resection can effectively prevent the delayed carpal tunnel syndrome occurrence for the distal radius fracture with open reduction by palm side.
Posture and Loading in the Pathomechanics of Carpal Tunnel Syndrome: A Review.
Vignais, Nicolas; Weresch, Justin; Keir, Peter J
2016-01-01
Carpal tunnel syndrome is a neuropathy of the median nerve at the wrist, and represents the most common peripheral neuropathy. It has long been an issue in the workplace because of healthcare costs and loss of productivity. The two main pathomechanisms of carpal tunnel syndrome include increased hydrostatic pressure within the carpal tunnel (carpal tunnel pressure) and contact stress (or impingement). As most cases of carpal tunnel syndrome in the workplace are labelled "idiopathic", a clear understanding of the physical parameters that may act as pathomechanisms is critical for its prevention. The aim of this review is to examine and quantify the influence of posture and loading factors on the increase of carpal tunnel pressure and median nerve contact stress. Forearm, wrist, and finger postures, as well as fingertip force have significant effects on carpal tunnel pressure. Contact stress on the median nerve is mainly a product of wrist posture and musculotendinous loading. Anatomical and musculoskeletal sources have been proposed to explain these effects. This critical review provides an improved understanding of pathomechanisms and etiology underlying carpal tunnel syndrome.
Panoramic radiographic predictors of mandibular third molar eruption.
Niedzielska, Iwona Anna; Drugacz, Jan; Kus, Nina; Kreska, Joanna
2006-08-01
Third molar (M3) eruption can be problematic. According to some orthodontic surgeons, the teeth are capable of aggravating the average crowding level in the dental arch. The question is whether it might be possible to give a prognosis for ultimate M3 position in the arch and make an early decision to extract or retain them. The purpose of the study was to determine which measurements made on panoramic tomograms might facilitate prognosis for M3 position in the dental arch over the years. The investigation involved 64 patients who had been enrolled to the study group 10 years earlier, ie, in 1993, when an analysis had been carried out regarding M3 effect on dental arch crowding. At that time panoramic tomograms had been taken, and dental casts made. The procedures were repeated in 2003. The following measurements were taken at baseline (1993) and at the end of the study (2003): (1)/the retromolar space to lower third molar crown width, (2) third molar angulation to the base of the mandible, and (3) third molar to second molar inclination. At some defined values of the Ganss ratio, and M3 inclination to mandibular base and second molar, it is possible to predict potential lower third molar alignment in the dental arch using a panoramic radiograph.
Tai, Kiyoshi; Park, Jae Hyun
2010-01-01
The purpose of this research was to use cone-beam computed tomography (CBCT) images to evaluate dental and skeletal changes in upper and lower jaws after treatment with Schwarz appliances. 28 patients with Angle Class I molar relationships and crowding were randomly divided into two groups--14 non-expanded and 14 expanded patients. 3D-Rugle CBCT software was used to measure various reference points before treatment (TO) and during the retention period of approximately 9 months after 6 to 12 month expansion (T1). Cephalometric and cast measurements were used to evaluate treatment in both groups. To test whether there were any significant differences between the control and treatment groups at TO and T1, the Mann-Whitney U-test was used. The dental arch (including tooth root apices) had expanded in the upper and lower jaws. Alveolar bone expansion of up to 2 mm apical to the cementoenamel junction (CEJ) was detected. The midpalatal sutures were separated in some cases and subsequent expansion was observed at the inner surface of the nasal cavity at the inferior turbinates. However no significant (P > 0.05) difference was observed in the inter-width of the mandibular bodies, zygomatic bones, nasal cavity in the middle turbinate region, condylar heads, or antegonial notches. In mandibular and maxillary cast measurements, arch crowding and arch perimeter showed statistically significant changes in the expansion group. The mandibular width values demonstrated no significant changes as measured from a point 2 mm apical to the CEJ whereas the maxillary width values demonstrated significant changes as measured from a point 2 mm apical to the CEJ. This study indicates that the Schwarz appliance primarily affects the dento-alveolar complex, while it has little effect on either the mandibular bodies, any associated structures including the maxillary midpalatal suture and the inter-width of the nasal cavity in the middle turbinate region. In addition, the center of rotation of the mandibular and maxillary first molar was observed apical to the root apex.
Reddy, Nagam Raja; Reddy, Jakranpally Sathya; Padmaja, Bramha Josyula Indira; Reddy, Budigi Madan Mohan; Sunil, Motupalli; Reddy, Bommireddy Tejeswar
2016-01-01
To evaluate the accuracy of dies made from dual arch impressions using different sectional dual arch trays, combinations of elastomeric impression materials, and the sequence of pour of dies. The dual arch impression materials were grouped into three groups depending on the combination of impression materials used and each group is subdivided into four subgroups. A sample size of 8 in each subgroup yielding a total 96 impressions will be made into three groups of 32 each (Group I, II, and III). Group I constitute impressions made using monophase (M) impression material, Group II constitute impressions made using combination of heavy body and light body (HL), and Group III constitute impressions made using combination of putty and light body (PL). Dies obtained were evaluated with a travelling microscope to measure the buccolingual width of the tooth at the margin by using the sharp corners of the notches as reference points. Descriptive analysis namely mean and standard deviation, one-way analysis of variance test. The results obtained in this study indicate that though not statistically significant, the metal dual arch trays performed better when compared to the plastic trays in reproducing die dimensions. From the results obtained, dies poured from combination of heavy body and light body impressions using plastic or metal dual arch trays showed least variation in bucco-lingual dimension from master model.
Reddy, Nagam Raja; Reddy, Jakranpally Sathya; Padmaja, Bramha Josyula Indira; Reddy, Budigi Madan Mohan; Sunil, Motupalli; Reddy, Bommireddy Tejeswar
2016-01-01
Aims: To evaluate the accuracy of dies made from dual arch impressions using different sectional dual arch trays, combinations of elastomeric impression materials, and the sequence of pour of dies. Subjects and Methods: The dual arch impression materials were grouped into three groups depending on the combination of impression materials used and each group is subdivided into four subgroups. A sample size of 8 in each subgroup yielding a total 96 impressions will be made into three groups of 32 each (Group I, II, and III). Group I constitute impressions made using monophase (M) impression material, Group II constitute impressions made using combination of heavy body and light body (HL), and Group III constitute impressions made using combination of putty and light body (PL). Dies obtained were evaluated with a travelling microscope to measure the buccolingual width of the tooth at the margin by using the sharp corners of the notches as reference points. Statistical Analysis Used: Descriptive analysis namely mean and standard deviation, one-way analysis of variance test. Results: The results obtained in this study indicate that though not statistically significant, the metal dual arch trays performed better when compared to the plastic trays in reproducing die dimensions. Conclusions: From the results obtained, dies poured from combination of heavy body and light body impressions using plastic or metal dual arch trays showed least variation in bucco-lingual dimension from master model. PMID:27141172
30 CFR 75.221 - Roof control plan information.
Code of Federal Regulations, 2010 CFR
2010-07-01
... main roof above the coalbed and for distance of at least 10 feet below the coalbed; and (iii) Indicate... the liners or arches. (8) Drawings indicating the planned width of openings, size of pillars, method...) The length, diameter, grade and type of anchorage unit to be used; (ii) The drill hole size to be used...
30 CFR 75.221 - Roof control plan information.
Code of Federal Regulations, 2011 CFR
2011-07-01
... main roof above the coalbed and for distance of at least 10 feet below the coalbed; and (iii) Indicate... the liners or arches. (8) Drawings indicating the planned width of openings, size of pillars, method...) The length, diameter, grade and type of anchorage unit to be used; (ii) The drill hole size to be used...
Lumbar facet anatomy changes in spondylolysis: a comparative skeletal study.
Masharawi, Youssef; Dar, Gali; Peleg, Smadar; Steinberg, Nili; Alperovitch-Najenson, Dvora; Salame, Khalil; Hershkovitz, Israel
2007-07-01
Opinions differ as to the exact mechanism responsible for spondylolysis (SP) and whether individuals with specific morphological characteristics of the lumbar vertebral neural arch are predisposed to SP. The aim of our study was to reveal the association between SP and the architecture of lumbar articular facets and the inter-facet region. Using a Microscribe three-dimensional apparatus (Immersion Co., San Jose, CA, USA), length, width and depth of all articular facets and all inter-facet distances in the lumbar spine (L1-L5) were measured. From the Hamann-Todd Human Osteological Collection (Cleveland Museum of Natural History, OH, USA) 120 normal male skeletons with lumbar spines in the control group and 115 with bilateral SP at L5 were selected. Analysis of variance was employed to examine the differences between spondylolytic and normal spines. Three profound differences between SP and the norm appeared: (1) in individuals with SP, the size and shape of L4's neural arch had significantly greater inter-facet widths, significantly shorter inter-facet heights and significantly shorter and narrower articular facets; (2) only in the L4 vertebra in individuals with SP was the inferior inter-facet width greater in size than the superior inter-facet width of the vertebra below (L5) (38.7 mm versus 40 mm); (3) in all lumbar vertebrae, the right inferior articular facets in individuals with SP were flatter compared to the control group. Individuals with L4 "SP" characteristics are at a greater risk of developing fatigue fractures in the form of spondylolysis at L5.
Carpal bone movements in gripping action of the giant panda (Ailuropoda melanoleuca)
ENDO, HIDEKI; SASAKI, MOTOKI; HAYASHI, YOSHIHIRO; KOIE, HIROSHI; YAMAYA, YOSHIKI; KIMURA, JUNPEI
2001-01-01
The movement of the carpal bones in gripping was clarified in the giant panda (Ailuropoda melanoleuca) by means of macroscopic anatomy, computed tomography (CT) and related 3-dimensional (3-D) volume rendering techniques. In the gripping action, 3-D CT images demonstrated that the radial and 4th carpal bones largely rotate or flex to the radial and ulnar sides respectively. This indicates that these carpal bones on both sides enable the panda to flex the palm from the forearm and to grasp objects by the manipulation mechanism that includes the radial sesamoid. In the macroscopic observations, we found that the smooth articulation surfaces are enlarged between the radial carpal and the radius on the radial side, and between the 4th and ulnar carpals on the ulnar side. The panda skilfully grasps using a double pincer-like apparatus with the huge radial sesamoid and accessory carpal. PMID:11273049
Cephalometric skeletal evaluation of patients with Incontinentia Pigmenti
Maahs, Marcia Angelica Peter; Kiszewski, Ana Elisa; Rosa, Rafael Fabiano Machado; Maria, Fernanda Diffini Santa; Prates, Frederico Ballvé; Zen, Paulo Ricardo Gazzola
2014-01-01
Purpose The aim of this study was to evaluate the skeletal characteristics of patients with the rare genetic disease of Incontinentia Pigmenti, by lateral cephalometric analysis on the antero-posterior plane and by frontal cephalometric analysis on the horizontal plane. Methods Lateral skeletal cephalometric analyses were performed according to Steiner for evaluation of antero-posterior direction, and frontal skeletal cephalometric analyses according to Ricketts for evaluation of horizontal direction in 9 patients with IP. Left and right facial widths at the level of the zygomatic arch were also evaluated. The Student t-test was used for paired to a 5% level of significance data. Results The lateral skeletal cephalometric findings were not statistically significant, but the Class II was the most frequent finding (44.4%), followed by Class III (33.3%) and Class I (22.2%). The right maxillo-mandibular width was significantly lower than normal values, and the right facial width was significantly higher than the left, at the level of the zygomatic arch. Conclusions Patients with IP showed more skeletal discrepancies of Class II and III than Class I malocclusion, and had significant horizontal facial skeletal asymmetries. This should alert health professionals to route these patients for orthodontic assessment and possible therapeutic interventions. However, larger samples are needed to better elucidate if these cephalometric findings can be specifically related to IP. PMID:25737924
Effects of static fingertip loading on carpal tunnel pressure
NASA Technical Reports Server (NTRS)
Rempel, D.; Keir, P. J.; Smutz, W. P.; Hargens, A.
1997-01-01
The purpose of this study was to explore the relationship between carpal tunnel pressure and fingertip force during a simple pressing task. Carpal tunnel pressure was measured in 15 healthy volunteers by means of a saline-filled catheter inserted percutaneously into the carpal tunnel of the nondominant hand. The subjects pressed on a load cell with the tip of the index finger and with 0, 6, 9, and 12 N of force. The task was repeated in 10 wrist postures: neutral; 10 and 20 degrees of ulnar deviation; 10 degrees of radial deviation; and 15, 30, and 45 degrees of both flexion and extension. Fingertip loading significantly increased carpal tunnel pressure for all wrist angles (p = 0.0001). Post hoc analyses identified significant increase (p < 0.05) in carpal tunnel pressure between unloaded (0 N) and all loaded conditions, as well as between the 6 and 12 N load conditions. This study demonstrates that the process whereby fingertip loading elevates carpal tunnel pressure is independent of wrist posture and that relatively small fingertip loads have a large effect on carpal tunnel pressure. It also reveals the response characteristics of carpal tunnel pressure to fingertip loading, which is one step in understanding the relationship between sustained grip and pinch activities and the aggravation or development of median neuropathy at the wrist.
Tai, Kiyoshi; Hotokezaka, Hitoshi; Park, Jae Hyun; Tai, Hisako; Miyajima, Kuniaki; Choi, Matthew; Kai, Lisa M; Mishima, Katsuaki
2010-09-01
The purpose of this study was to evaluate the efficacy of the Schwarz appliance with a new method of superimposing detailed cone-beam computed tomography (CBCT) images. The subjects were 28 patients with Angle Class I molar relationships and crowding; they were randomly divided into 2 groups: 14 expanded and 14 nonexpanded patients. Three-dimensional Rugle CBCT software (Medic Engineering, Kyoto, Japan) was used to measure 10 reference points before treatment (T0) and during the retention period of approximately 9 months after 6 to 12 months of expansion (T1). Cephalometric and cast measurements were used to evaluate the treatments in both groups. Also, the mandibular widths of both groups were measured along an axial plane at 2 levels below the cementoenamel junction from a CBCT scan. Differences between the 2 groups at T0 and T1 were analyzed by using the Mann-Whitney U test. The dental arch (including tooth root apices) had expanded; however, alveolar bone expansion was only up to 2 mm below the cementoenamel junction. There was a statistically significant (P <0.05) difference between the groups in terms of crown, cementoenamel junction, root, and upper alveolar process. However, no significant (P >0.05) differences were observed in the interwidths of the mandibular body, zygomatic bones, condylar heads, or mandibular antegonial notches. In the mandibular cast measurements, arch crowding and arch perimeter showed statistically significant changes in the expanded group. The buccal mandibular width and lingual mandibular width values had significant changes as measured from a point 2 mm below the cementoenamel junction. The findings suggest that the Schwarz appliance primarily affected the dentoalveolar complex, but it had little effect on either the mandibular body or any associated structures. In addition, the molar center of rotation was observed to be below the root apex. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Kim, J K; Lim, H M
2015-02-01
The purpose of this study was to translate and culturally adapt the Carpal Tunnel Questionnaire to produce an equivalent Korean version. A total of 53 patients completed the Korean version of the Carpal Tunnel Questionnaire pre-operatively and 3 months after open carpal tunnel release. All 53 also completed the Korean version of the Disabilities of Arm, Shoulder, and Hand questionnaire pre-operatively and 3 months post-operatively. Reliability was measured by determining the test-retest reliability and internal consistency. Test-retest reliability was assessed using intraclass correlation coefficients and paired t-tests, and internal consistency using Cronbach's alpha coefficients. Pearson correlation analysis was carried out on the Korean version of the Carpal Tunnel Questionnaire scores and the Korean version of the Disabilities of Arm, Shoulder, and Hand scores to assess construct validity. Responsiveness was evaluated using effect sizes and standardized response means. The reliability of the Korean version of the Carpal Tunnel Questionnaire was good. The scores in the Korean version of the Disabilities of Arm, Shoulder, and Hand strongly correlated with the scores in the Korean version of the Carpal Tunnel Questionnaire. Standardized response mean and effect size were both large for the Korean version of the Carpal Tunnel Questionnaire. The study shows that the Korean version of the Carpal Tunnel Questionnaire is a reliable, valid and responsive instrument for measuring outcomes in carpal tunnel syndrome. © The Author(s) 2014.
Fernández-de-las-Peñas, César; de la Llave-Rincón, Ana Isabel; Fernández-Carnero, Josué; Cuadrado, María Luz; Arendt-Nielsen, Lars; Pareja, Juan A
2009-06-01
The aim of this study was to investigate whether bilateral widespread pressure hypersensitivity exists in patients with unilateral carpal tunnel syndrome. A total of 20 females with carpal tunnel syndrome (aged 22-60 years), and 20 healthy matched females (aged 21-60 years old) were recruited. Pressure pain thresholds were assessed bilaterally over median, ulnar, and radial nerve trunks, the C5-C6 zygapophyseal joint, the carpal tunnel and the tibialis anterior muscle in a blinded design. The results showed that pressure pain threshold levels were significantly decreased bilaterally over the median, ulnar, and radial nerve trunks, the carpal tunnel, the C5-C6 zygapophyseal joint, and the tibialis anterior muscle in patients with unilateral carpal tunnel syndrome as compared to healthy controls (all, P < 0.001). Pressure pain threshold was negatively correlated to both hand pain intensity and duration of symptoms (all, P < 0.001). Our findings revealed bilateral widespread pressure hypersensitivity in subjects with carpal tunnel syndrome, which suggest that widespread central sensitization is involved in patients with unilateral carpal tunnel syndrome. The generalized decrease in pressure pain thresholds associated with pain intensity and duration of symptoms supports a role of the peripheral drive to initiate and maintain central sensitization. Nevertheless, both central and peripheral sensitization mechanisms are probably involved at the same time in carpal tunnel syndrome.
Study on load test of 100m cross-reinforced deck type concrete box arch bridge
NASA Astrophysics Data System (ADS)
Shi, Jing Xian; Cheng, Ying Jie
2018-06-01
Found in the routine quality inspection of highway bridge that many vertical fractures on the main beam (10mT beam) of the steel reinforced concrete arch bridge near the hydropower station. In order to grasp the bearing capacity of this bridge under working conditions with cracks, the static load and dynamic load test of box arch bridge are carried out. The Midas civil theory is calculated by using the special plate trailer - 300 as the calculation load, and the deflection and stress of the critical section are tested by the equivalent cloth load in the test vehicle. The pulsation test, obstacles and no obstacle driving test were carried out. Experimental results show that the bridge under the condition of the test loads is in safe condition, main bearing component of the strength and stiffness meet the design requirements, the crack width does not increase, in the process of loading bridge overall work performance is good.
McLennan, Rebecca; Kulesa, Paul M.
2011-01-01
Cranial neural crest cells (NCCs) require neuropilin signaling to reach and invade the branchial arches. Here, we use an in vivo chick model to investigate whether the neuropilin-1 knockdown phenotype is specific to the second branchial arch (ba2), changes in NCC behaviors and phenotypic consequences, and whether neuropilins work together to facilitate entry into and invasion of ba2. We find that cranial NCCs with reduced neuropilin-1 expression displayed shorter protrusions and decreased cell body and nuclear length-to-width ratios characteristic of a loss in polarity and motility, after specific interaction with ba2. Directed NCC migration was rescued by transplantation of transfected cells into rhombomere 4 of younger hosts. Lastly, reduction of neuropilin-2 expression by shRNA either solely or with reduction of neuropilin-1 expression did not lead to a stronger head phenotype. Thus, NCCs, independent of rhombomere origin, require neuropilin-1, but not neuropilin-2 to maintain polarity and directed migration into ba2. PMID:20503363
Effects of carrying a backpack in a symmetrical manner on the shape of the feet.
Drzał-Grabiec, Justyna; Snela, Sławomir; Rachwał, Maciej; Rykała, Justyna; Podgórska, Justyna
2013-01-01
The aim of this study was to assess changes in the shape of the feet while carrying a backpack constituting 10% of a child's weight. It was an observational, cross-sectional study involving 118 primary school children aged 11-13 years. Selected parameters of foot shape were assessed in both a normal position and with a backpack using podoscopy and a CQ-ST examination device. The study revealed significant differences in the length and width of the right and left feet between assessments. Moreover, the longitudinal arch of the foot was significantly lowered and deformity of the great toe was reported. Carrying a backpack constituting 10% of a child's weight results in lowering of the longitudinal and traverse arches of the feet and advanced toe deformities. We performed an observational, cross-sectional study examining the effect of carrying a backpack constituting 10% of a child's weight on parameters of foot shape and observed significant lowering of the longitudinal and traverse arches of the feet and advanced toe deformities.
Sohrt, J T; Heppelmann, M; Rehage, J; Staszyk, C
2013-01-01
In a 7-day-old heifer calf, a bilateral flexural deformity of the forelimbs involving the digital flexor tendons, the suspensory ligament and the ulnar and radial carpal flexor tendons was diagnosed. After 2 weeks of conservative treatment consisting of manual stretching of the legs and the application of splints and wooden blocks, which were glued to the soles and extended beyond the tip of the claws, the right forelimb could be extended sufficiently to allow weight bearing, whereas the left forelimb could be passively extended to only approximately 120°. Therefore, tenotomy of the ulnar carpal flexor tendon, the digital flexor tendons and the suspensory ligament was carried out in the left leg. A support bandage was then applied to the leg for 8 weeks, after which the carpus and fetlock could be completely extended passively. Flexural deformity of the carpus caused by contracture of the carpal flexor tendons was treated by means of a tenotomy of the ulnar carpal flexor tendon proximal to the accessory carpal bone, which allowed preservation of the carpal tunnel and avoided the risk of iatrogenic damage to nerves and the carpal joint capsule.
Park, Yeong-Dong; Park, Yun-Jin; Park, Sang-Seo; Lee, Hae-Lim; Moon, Hyeong-Hun; Kim, Myung-Ki
2017-06-01
Taping therapy is one of the most conservative treatments for carpal tunnel syndrome (CTS). Preceding research studied on pain control, grip strength, and wrist function but no studies have been reported on electrophysiolgical changes after taping therapy. The aim of this study is to evaluate the effects of taping therapy for carpal space expansion on electrophysiological in 20 female patients aged from 40s to 60s with CTS. Experimental group applied taping therapy for carpal space expansion twice a week for 4 weeks and control group did not. There were significant differences between distal motor latency (DML) and sensory nerve conduction velocity (SNCV), but no difference between compound muscle action potential and sensory nerve action potential (SNAP) after 4 weeks taping treatment. Also, there was a significant difference in DML, SNCV, and SNAP in between groups. In conclusion, taping therapy for carpal space expansion can help to reduce the pressure of the carpal tunnel in CTS patients with mild symptoms.
Suppaphol, Sorasak; Worathanarat, Patarawan; Kawinwongkovit, Viroj; Pittayawutwinit, Preecha
2012-04-01
To compare the operative outcome of carpal tunnel release between limited open carpal tunnel release using direct vision and tunneling technique (group A) with standard open carpal tunnel release (group B). Twenty-eight patients were enrolled in the present study. A single blind randomized control trial study was conducted to compare the postoperative results between group A and B. The study parameters were Levine's symptom severity and functional score, grip and pinch strength, and average two-point discrimination. The postoperative results between two groups were comparable with no statistical significance. Only grip strength at three months follow up was significantly greater in group A than in group B. The limited open carpal tunnel release in the present study is effective comparable to the standard open carpal tunnel release. The others advantage of this technique are better cosmesis and improvement in grip strength at the three months postoperative period.
Accessory carpal bone luxation in two gray wolves (Canis lupus).
Keller, Dominique L; Ellison, Michelle; Clyde, Victoria L; Wallace, Roberta S
2012-09-01
Two sibling male castrated gray wolves (Canis lupus) developed acute onset right forelimb lameness, one at 8 and the other at 11 yr of age. In both cases, the right carpus was swollen, carpal hyperextension was notable, and the wolves exhibited significant intermittent lameness of the affected limb. Radiographs revealed right accessory carpal bone luxation in both cases, with type III fracture of the accessory carpal bone in one wolf. Although carpal bone luxation in domestic dogs is frequently treated surgically, conservative medical management resolved the lameness in both wolves with no further complications.
Autologous Fat Transfer in Secondary Carpal Tunnel Release
Noszczyk, Bartłomiej H.
2015-01-01
Background: Carpal tunnel release is the gold standard for the treatment of median nerve compression disease. Recurrent or persistent symptoms do not occur in most patients, although a small number of them have indicated that such a postoperative condition indeed exists. Some patients undergo repeated treatments. In the majority of the cases, the disease is associated with scarring in the carpal tunnel or even reformation of the carpal ligament. The authors propose the usage of autologous fat grafting during secondary carpal tunnel release to inhibit the scarring process. Methods: Ten patients with recurrent or persistent symptoms underwent autologous fat grafting at the time of their repeated carpal tunnel release. Fat was harvested from the lower abdomen and grafted into the scarred transverse carpal ligament and surrounding tissues. Each patient underwent pre- and postoperative examinations and completed the carpal tunnel questionnaire (Boston) to evaluate their sensory and motor functions. The patients underwent 1 year of follow-up. Results: There were 2 main reasons for continued symptoms: a technical mistake resulting in incomplete release (IR) during the first operation and abundant scarring (ABS) in the operated area. The beneficial effects of the interventions were confirmed by a clinical study and by administering the carpal tunnel questionnaire to all patients (functional severity score decreased from 4.38 to 1.88 in IR and 3.62 to 1.48 in ABS group, sensory severity score from 3.26 to 1.7 in IR and 3.04 to 1.48 in ABS group; P < 0.05) after 12 months of follow-up. Conclusion: Our initial observations suggest the possible efficacy of adipose tissue in secondary carpal tunnel release. PMID:26090291
McShane, John M; Slaff, Samantha; Gold, Judith E; Nazarian, Levon N
2012-09-01
The purpose of this study was to evaluate the effectiveness of a novel treatment procedure, sonographically guided percutaneous needle release of the carpal tunnel, for individuals with carpal tunnel syndrome. Seventeen patients (89% female; mean age, 62 years; SD, 13.6 years) with a clinical diagnosis of carpal tunnel syndrome who had undergone a sonographically guided percutaneous needle release of the carpal tunnel at least 6 months before follow-up evaluation were retrospectively reviewed. At the follow-up evaluation, to ascertain previous and current symptoms as well as functional impairment, the patients filled out a hand diagram and a questionnaire. In addition, medical records were reviewed, and patients were queried regarding complications such as infection or nerve damage. Median nerve sonographic measurements and a physical evaluation were performed on a subset of 13 patients who came to the office for evaluation. Postprocedure sonography showed that patients had a significantly smaller (P = .03) cross-sectional area of the median nerve compared to pretreatment values. In addition, patients had significantly fewer symptoms (P < .0001), less functional impairment (P = .0002), and an improved hand diagram score (P < .0001). Postprocedure patients had grip strength that was 12 lb below average (≈1 SD below) compared to grip strength norms. However, most patients (84.6%) had negative clinical diagnostic test results for carpal tunnel syndrome, and 86% said they were satisfied with the procedure. There were no procedure-related infections or nerve injuries. Of the patients with carpal tunnel syndrome who agreed to participate in this study, most had favorable symptomatic and functional outcomes. Sonographically guided percutaneous needle release of the carpal tunnel may be an alternative option to traditional surgical treatment of carpal tunnel syndrome.
Lumbar facet anatomy changes in spondylolysis: a comparative skeletal study
Dar, Gali; Peleg, Smadar; Steinberg, Nili; Alperovitch-Najenson, Dvora; Salame, Khalil; Hershkovitz, Israel
2007-01-01
Opinions differ as to the exact mechanism responsible for spondylolysis (SP) and whether individuals with specific morphological characteristics of the lumbar vertebral neural arch are predisposed to SP. The aim of our study was to reveal the association between SP and the architecture of lumbar articular facets and the inter-facet region. Methods: Using a Microscribe three-dimensional apparatus (Immersion Co., San Jose, CA, USA), length, width and depth of all articular facets and all inter-facet distances in the lumbar spine (L1–L5) were measured. From the Hamann-Todd Human Osteological Collection (Cleveland Museum of Natural History, OH, USA) 120 normal male skeletons with lumbar spines in the control group and 115 with bilateral SP at L5 were selected. Analysis of variance was employed to examine the differences between spondylolytic and normal spines. Results: Three profound differences between SP and the norm appeared: (1) in individuals with SP, the size and shape of L4’s neural arch had significantly greater inter-facet widths, significantly shorter inter-facet heights and significantly shorter and narrower articular facets; (2) only in the L4 vertebra in individuals with SP was the inferior inter-facet width greater in size than the superior inter-facet width of the vertebra below (L5) (38.7 mm versus 40 mm); (3) in all lumbar vertebrae, the right inferior articular facets in individuals with SP were flatter compared to the control group. Conclusions: Individuals with L4 “SP” characteristics are at a greater risk of developing fatigue fractures in the form of spondylolysis at L5. PMID:17440753
Anatomical variations of the carpal tunnel structures
Mitchell, Ryan; Chesney, Amy; Seal, Shane; McKnight, Leslie; Thoma, Achilleas
2009-01-01
There are many anatomical variations in and around the carpal tunnel that affect the nerves, tendons and arteries in this area. Awareness of these variations is important both during the clinical examination and during carpal tunnel release. The purpose of the present review is to highlight recognized anatomical variations within the carpal tunnel including variation in nerve anatomy, tendon anatomical variants, vascular anatomical variations and muscle anatomical variations. PMID:20808747
Gender differences of foot characteristics in older Japanese adults using a 3D foot scanner.
Saghazadeh, Mahshid; Kitano, Naruki; Okura, Tomohiro
2015-01-01
Knowledge of gender differences in foot shape assists shoe manufactures with designing appropriate shoes for men and women. Although gender differences in foot shapes are relatively known among young men and women, less is known about how the older men and women's feet differ in shape. A recent development in foot shape assessment is the use of 3D foot scanners. To our knowledge this technology has yet to be used to examine gender differences in foot shape of Japanese older adults. This cross-sectional study included 151 older men (74.5 ± 5.6 years) and 140 older women (73.9 ± 5.1 years) recruited in Kasama City, Japan. Foot variables were measured in sitting and standing positions using Dream GP Incorporated's 3D foot scanner, Footstep PRO (Osaka, Japan). Scores were analyzed as both raw and normalized to truncated foot length using independent samples t-test and analysis of covariance, respectively. In men, the measurement values for navicular height, first and fifth toe and instep heights, ball and heel width, ball girth, arch height index (just standing), arch rigidity index and instep girth were significantly greater than the women's, whereas the first toe angle, in both sitting and standing positions was significantly smaller. However, after normalizing, the differences in ball width, heel width, height of first and fifth toes in both sitting and standing and ball girth in sitting position were nonsignificant. According to Cohen's d, among all the foot variables, the following had large effect sizes in both sitting and standing positions: truncated foot length, instep, navicular height, foot length, ball girth, ball width, heel width and instep girth. This study provides evidence of anthropometric foot variations between older men and women. These differences need to be considered when manufacturing shoes for older adults.
Pictorial essay: Role of ultrasound in failed carpal tunnel decompression.
Botchu, Rajesh; Khan, Aman; Jeyapalan, Kanagaratnam
2012-01-01
USG has been used for the diagnosis of carpal tunnel syndrome. Scarring and incomplete decompression are the main causes for persistence or recurrence of symptoms. We performed a retrospective study to assess the role of ultrasound in failed carpal tunnel decompression. Of 422 USG studies of the wrist performed at our center over the last 5 years, 14 were for failed carpal tunnel decompression. Scarring was noted in three patients, incomplete decompression in two patients, synovitis in one patient, and an anomalous muscle belly in one patient. No abnormality was detected in seven patients. We present a pictorial review of USG findings in failed carpal tunnel decompression.
Pictorial essay: Role of ultrasound in failed carpal tunnel decompression
Botchu, Rajesh; Khan, Aman; Jeyapalan, Kanagaratnam
2012-01-01
USG has been used for the diagnosis of carpal tunnel syndrome. Scarring and incomplete decompression are the main causes for persistence or recurrence of symptoms. We performed a retrospective study to assess the role of ultrasound in failed carpal tunnel decompression. Of 422 USG studies of the wrist performed at our center over the last 5 years, 14 were for failed carpal tunnel decompression. Scarring was noted in three patients, incomplete decompression in two patients, synovitis in one patient, and an anomalous muscle belly in one patient. No abnormality was detected in seven patients. We present a pictorial review of USG findings in failed carpal tunnel decompression. PMID:22623813
Thilander, Birgit
2009-04-01
The aim of the present study was to examine dentoalveolar development in subjects with an 'ideal' (normal) occlusion. The material comprised 436 study casts of 189 male and 247 female subjects of Swedish origin between the ages of 5 and 31 years with no history of orthodontic treatment. Tooth width, and arch length, width, and depth, as well as palatal height were measured. The data were analysed with a Student's t-test. The results verified that continuous changes of the dental arches occur from the primary until the adult period, with individual variations. This change could be interpreted as a biological migration of the dentition, resulting in anterior crowding especially in the mandible, even in subjects with congenitally missing third molars. The occlusion should be regarded as a dynamic rather than a stable interrelationship between facial structures. This natural development has to be considered in orthodontic treatment planning as well as in assessment of stability following orthodontic treatment. A continuous increase of palatal height up to adulthood seems to be an effect of a slow continuous eruption of the teeth. This finding is also of significance in explaining the infraposition of implant-supported crowns.
Carpal Tunnel Syndrome (For Kids)
... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works ... Search English Español Carpal Tunnel Syndrome KidsHealth / For Kids / Carpal Tunnel Syndrome What's in this article? Where ...
Carpal tunnel syndrome - an occupational hazard facing dentistry.
Abichandani, Sagar; Shaikh, Saquib; Nadiger, Ramesh
2013-10-01
The authors wished to evaluate the comprehensive literature on carpal tunnel syndrome to discover work specific to carpal tunnel syndrome among dentists in order to determine whether there is any correlation with dentists having a higher prevalence of its occurrence. A review of dental literature involving carpal tunnel syndrome was undertaken. Details appearing in the literature before 1995 was reviewed in a comprehensive manner and the literature after 1995 were reviewed electronically. The prevalence of carpal tunnel syndrome is higher in dental professionals involved in various aspects of dental specialties. Abnormal postures, including muscle imbalances, muscle necrosis, trigger points, hypomobile joints, nerve compression and spinal disk herniation or degeneration may result in serious detrimental physiological changes in the body. These changes often result in pain, injury or possible neuroskeletal disorders. Dentists have an increased risk of carpal tunnel syndrome and precautions and care should be exercised to prevent detrimental irreversible changes occurring. © 2013 FDI World Dental Federation.
Nonoccupational Risk Factors for Carpal Tunnel Syndrome
Solomon, Daniel H; Katz, Jeffrey N; Bohn, Rhonda; Mogun, Helen; Avorn, Jerry
1999-01-01
OBJECTIVE To examine the relation between selected nonoccupational risk factors and surgery for carpal tunnel syndrome. DESIGN Case-control study using an administrative database. PARTICIPANTS Enrollees of New Jersey Medicare or Medicaid programs during 1989 to 1991. MEASUREMENTS The outcome of interest was open or endoscopic carpal tunnel release. We examined the relation between carpal tunnel release and diabetes mellitus, thyroid disease, inflammatory arthritis, hemodialysis, pregnancy, use of corticosteroids, and hormone replacement therapy. MAIN RESULTS In multivariate models, inflammatory arthritis was strongly associated with carpal tunnel release (odds ratio [OR] 2.9; 95% confidence interval [CI] 2.2, 3.8). However, corticosteroid use also appeared to be associated with a greater likelihood of undergoing carpal tunnel release, even in the absence of inflammatory arthritis (OR 1.6; 95% CI 1.2, 2.1). Diabetes had a weak but significant association with carpal tunnel release (OR 1.4; 95% CI 1.2, 1.8), as did hypothyroidism (OR 1.7; 95% CI 1.1, 2.8), although patients with hyperthyroidism did not have any change in risk. Women who underwent carpal tunnel release were almost twice as likely to be users of estrogen replacement therapy as controls (OR 1.8; 95% CI 1.0, 3.2). CONCLUSIONS Although inflammatory arthritis is the most important nonoccupational risk factor for carpal tunnel release, these data substantiate the increase in risk associated with diabetes and untreated hypothyroidism. Further investigation in detailed clinical studies will be necessary to confirm whether changes in corticosteroid use and hormone replacement therapy offer additional means of risk reduction for this common condition. PMID:10337041
Maxillary segmental distraction in children with unilateral clefts of lip, palate, and alveolus.
Zemann, Wolfgang; Pichelmayer, Margit
2011-06-01
Alveolar clefts are commonly closed by a bone grafting procedure. In cases of wide clefts the deficiency of soft tissue in the cleft area may lead to wound dehiscence and loss of the bony graft. Segmental maxillary bony transfer has been mentioned to be useful in such cases. Standard distraction devices allow unidirectional movement of the transported segment. Ideally the distraction should strictly follow the dental arch. The aim of this study was to analyze distraction devices that were adapted to the individual clinical situation of the patients. The goal was to achieve a distraction strictly parallel to the dental arch. Six children with unilateral clefts of lip, palate, and alveolus between 12 and 13 years of age were included in the study. The width of the cleft was between 7 and 19 mm. Dental cast models were used to manufacture individual distraction devices that should allow a segmental bony transport strictly parallel to the dental arch. Segmental osteotomy was performed under general anesthesia. Distraction was started 5 days after surgery. All distracters were tooth fixed but supported by palatal inserted orthodontic miniscrews. In all patients, a closure of the alveolar cleft was achieved. Two patients required additional bone grafting after the distraction procedure. The distraction was strictly parallel to the dental arch in all cases. In 1 case a slight cranial displacement of the transported maxillary segment could be noticed, leading to minor modifications of the following distractors. Distraction osteogenesis is a proper method to close wide alveolar clefts. Linear segmental transport is required in the posterior part of the dental arch, whereas in the frontal part the bony transport should run strictly parallel to the dental arch. An exact guided segmental transport may reduce the postoperative orthodontic complexity. Copyright © 2011 Mosby, Inc. All rights reserved.
Gopalakrishnan, Umarevathi; Sridhar, Premkumar
2017-01-01
The purpose of the study was to assess the skeletal and dental effects of fan-type rapid maxillary expansion (RME) appliance and Hyrax RME appliance on the craniofacial structures. The sample of the study included 12 patients with constricted maxillary arches. Acrylic bonded type of attachment was used for both groups. Changes in sagittal, vertical, and transverse relationship were assessed with lateral and frontal cephalograms, respectively. Intercanine and intermolar widths were measured with stone models. Pre- and immediate post-treatment records were statistically analyzed with Wilcoxon signed-rank test. The differences between the groups were evaluated using Mann-Whitney U-test. Since the data pertaining to intercanine width and intermolar width were normally distributed, parametric test of significance (unpaired t -test) was used to compare them. Results showed that Hyrax presented with significantly greater increments for both nasal cavity width and maxillary width when compared to fan-type RME. Both groups had retroclination of incisors. The increase in the intercanine width was almost similar in both groups. Fan-type RME caused only minimal expansion of the intermolar width when compared to the Hyrax. The ratio between the intercanine and intermolar width expansion was nearly 4:1 in the fan-type RME and 0.75:1 in Hyrax.
Er:YAG laser for the surgical treatment of the carpal tunnel syndrome
NASA Astrophysics Data System (ADS)
Russ, Detlef; Ebinger, Thomas; Illich, Wolfgang; Steiner, Rudolf W.
2003-10-01
We developed a new surgical procedure to improve the recurrence rate using an Er:YAG laser as dissection tool for the carpal ligament with the objective to ablate a small amount of the carpal ligament and to denaturate its ends. The Er:YAG Laser was transmitted to the applicator via a GeO fiber. With this system we proceeded 10 carpal ligament dissections without any complications in the follow-up period. All patients were free of pain and recurrence.
Carpal Tunnel Exercises: Can They Relieve Symptoms?
... relieve symptoms, such as pain and numbness. These exercises are most effective when combined with other treatments, such as behavior changes or wrist splints, for mild to moderate carpal tunnel syndrome. If your symptoms ... exercises — one type of carpal tunnel exercise — might help ...
Carpal tunnel volume changes of the wrist under distraction.
Cho, M S; Means, K R; Shrout, J A; Segalman, K A
2008-10-01
This study attempts to determine changes in carpal canal volume with distraction across the wrist. Uniform longitudinal distraction was maintained with two external fixators on the radial and ulnar aspects of the forearm axis of five cadaver specimens. After CT scanning, volume determinations were made at 5 mm increments beginning at the lunocapitate joint to a point 1.5 cm distal to the middle finger carpometacarpal joint. There was a statistically significant decrease of the mean total carpal canal volume from 0 to 4.54 kg of distraction, with no statistically significant decrease from 0 to 2.27 kg or 2.27 to 4.54 kg. The largest decrease occurred at 15 and 20 mm distal to the proximal edge of the transverse carpal ligament corresponding to the level of the hamate hook. Reduction in mean carpal canal volume was 10.2% and 7.5% at these distances, respectively, from 0 to 4.54 kg of distraction. Progressive distraction across the wrist causes a decrease in total carpal canal volume.
Bunker, D L J; Pappas, G; Moradi, P; Dowd, M B
2012-01-01
Patients presenting with distal end radius fractures may have concomitant carpal instability due to disruption of the scapholunate ligament. This study examined the incidence of static radiographic signs of carpal instability in patients with distal radial fractures before and after fracture treatment. We performed a retrospective radiographic study of 141 patients presenting to Central Middlesex Hospital, London between January 2002-May 2004 with distal end radius fractures. We used abnormal scapholunate angle as the primary indicator of possible carpal dissociation. Abnormal scapholunate angles were noted in 39% of patients at presentation and 35% of patients after treatment with no statistically significant intra-patient variability. Persistent static radiographic signs of carpal instability are high in this subset of patients. The long-term morbidity of persistent wrist instability may be avoided by early radiological diagnosis with clinical correlation to identify carpal ligament injuries and initiate treatment that addresses both the bony and ligamentous components of the injury.
Mechanical stability of propped hydraulic fractures: A numerical study
DOE Office of Scientific and Technical Information (OSTI.GOV)
Asgian, M.I.; Cundall, P.A.; Brady, B.H.
1995-03-01
Proppant is sometimes produced along with hydrocarbons in hydraulically fractured petroleum wells. Sometimes 10% to 20% of the proppant is backproduced, which can lead to damaged equipment and downtime. Furthermore, proppant flowback can lead to a substantial loss of fracture conductivity. A numerical study was conducted to help understand what conditions are likely to lead to proppant flowback. In the simulations, the mechanical interaction of a larger number (several thousand) individual proppant grains was modeled with a distinct-element-type code. The numerical simulations show that hydraulic fractures propped with cohesionless, unbonded proppant fail under closure stress at a critical ratio ofmore » mean grain diameter to fracture width. This is consistent with published laboratory studies. The simulations identify the mechanism (arch failure) that triggers the mechanical instability and also show that the primary way that drawdowns (less than {approx} 75 psi/ft) affect proppant flowback is to transport loose proppant grains in front of the stable arch to the wellbore. Drawdowns > 75 psi/ft are sufficient to destabilize the arch and to cause progressive failure of the propped fractures.« less
NASA Astrophysics Data System (ADS)
Nugrahani, F.; Jazaldi, F.; Noerhadi, N. A. I.
2017-08-01
The field of orthodontics is always evolving,and this includes the use of innovative technology. One type of orthodontic technology is the development of three-dimensional (3D) digital study models that replace conventional study models made by stone. This study aims to compare the mesio-distal teeth width, intercanine width, and intermolar width measurements between a 3D digital study model and a conventional study model. Twelve sets of upper arch dental impressions were taken from subjects with non-crowding teeth. The impressions were taken twice, once with alginate and once with polivinylsiloxane. The alginate impressions used in the conventional study model and the polivinylsiloxane impressions were scanned to obtain the 3D digital study model. Scanning was performed using a laser triangulation scanner device assembled by the School of Electrical Engineering and Informatics at the Institut Teknologi Bandung and David Laser Scan software. For the conventional model, themesio-distal width, intercanine width, and intermolar width were measured using digital calipers; in the 3D digital study model they were measured using software. There were no significant differences between the mesio-distal width, intercanine width, and intermolar width measurments between the conventional and 3D digital study models (p>0.05). Thus, measurements using 3D digital study models are as accurate as those obtained from conventional study models
Telfer, Scott; Gibson, Kellie S; Hennessy, Kym; Steultjens, Martijn P; Woodburn, Jim
2012-05-01
To determine, for a number of techniques used to obtain foot shape based around plaster casting, foam box impressions, and 3-dimensional scanning, (1) the effect the technique has on the overall reproducibility of custom foot orthoses (FOs) in terms of inter- and intracaster reliability and (2) the reproducibility of FO design by using computer-aided design (CAD) software in terms of inter- and intra-CAD operator reliability for all these techniques. Cross-sectional study. University laboratory. Convenience sample of individuals (N=22) with noncavus foot types. Not applicable. Parameters of the FO design (length, width at forefoot, width at rearfoot, and peak medial arch height), the forefoot to rearfoot angle of the foot shape, and overall volume match between device designs. For intra- and intercaster reliability of the different methods of obtaining the foot shape, all methods fell below the reproducibility quality threshold for the medial arch height of the device, and volume matching was <80% for all methods. The more experienced CAD operator was able to achieve excellent reliability (intraclass correlation coefficients >0.75) for all variables with the exception of forefoot to rearfoot angle, with overall volume matches of >87% of the devices. None of the techniques for obtaining foot shape met all the criteria for excellent reproducibility, with the peak arch height being particularly variable. Additional variability is added at the CAD stage of the FO design process, although with adequate operator experience good to excellent reproducibility may be achieved at this stage. Taking only basic linear or angular measurement parameters from the device may fail to fully capture the variability in FO design. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
Wesemann, Christian; Muallah, Jonas; Mah, James; Bumann, Axel
2017-01-01
The primary objective of this study was to compare the accuracy and time efficiency of an indirect and direct digitalization workflow with that of a three-dimensional (3D) printer in order to identify the most suitable method for orthodontic use. A master model was measured with a coordinate measuring instrument. The distances measured were the intercanine width, the intermolar width, and the dental arch length. Sixty-four scans were taken with each of the desktop scanners R900 and R700 (3Shape), the intraoral scanner TRIOS Color Pod (3Shape), and the Promax 3D Mid cone beam computed tomography (CBCT) unit (Planmeca). All scans were measured with measuring software. One scan was selected and printed 37 times on the D35 stereolithographic 3D printer (Innovation MediTech). The printed models were measured again using the coordinate measuring instrument. The most accurate results were obtained by the R900. The R700 and the TRIOS intraoral scanner showed comparable results. CBCT-3D-rendering with the Promax 3D Mid CBCT unit revealed significantly higher accuracy with regard to dental casts than dental impressions. 3D printing offered a significantly higher level of deviation than digitalization with desktop scanners or an intraoral scanner. The chairside time required for digital impressions was 27% longer than for conventional impressions. Conventional impressions, model casting, and optional digitization with desktop scanners remains the recommended workflow process. For orthodontic demands, intraoral scanners are a useful alternative for full-arch scans. For prosthodontic use, the scanning scope should be less than one quadrant and three additional teeth.
Akalin, Zerrin Fidan; Ozkan, Yasemin Kulak; Ekerim, Ahmet
2013-01-01
The effects of implant angulation, impression material, and variation in width of the arch curvature on transfer models were evaluated. Three edentulous maxillary epoxy resin models were fabricated, and six internal-connection implant analogs were placed in different locations and different angulations in each model. In the first model, implants were positioned in the canine, first premolar, and first molar regions, and all analogs were positioned parallel to each other and perpendicular to the horizontal crestal plane (parallel model). In the second model, analogs were positioned in same regions (canine, first premolar, and first molar), but three of them were positioned with 10-degree buccal angulations (versus the horizontal crestal plane) (angular model). In the third model, analogs were inserted in the lateral incisor, canine, and second molar regions and parallel to each other (wide-arch model). Eighteen impressions of each model were made with each of the three materials--condensation silicone, polyvinyl siloxane, and polyether--and impressions were poured and kept at room temperature for 24 hours. They were then observed under a toolmaker's microscope, with epoxy resin models of each group used as references. Distance deformations between implants in each model in the x- and y-axes were recorded separately. Implant angulation deformations were recorded in the x-z plane. Statistical evaluations were performed with analysis of variance and the least significant difference post hoc test. Angular model measurements showed the greatest deformation values (P < .05). All impression materials showed deformation, and the polyether impression models showed statistically significantly less deformation in angular measurements (P < .05). The models with implants placed parallel to each other exhibited greater accuracy than a model with implants placed at angles to each other.
Stonefish envenomation with acute carpal tunnel syndrome.
Ling, Samuel K K; Cheng, S C; Yen, C H
2009-12-01
Stonefish envenomation is a common marine sting. Although stonefish injuries are commonly sustained during maritime activities, this local delicacy can also be considered a regional occupational hazard for chefs. The availability and consumption of stonefish in local restaurants has increased the risk of acute carpal tunnel syndrome after a stonefish injury. This case report describes acute carpal tunnel syndrome following stonefish envenomation. An excellent recovery was achieved after surgical decompression of the carpal tunnel syndrome. Standard management of stonefish injuries should therefore take into account the possibility that this orthopaedic emergency may complicate the injury.
Carpal Tunnel Syndrome: Physical Therapy or Surgery?
2017-03-01
Carpal tunnel syndrome causes pain, numbness, and weakness in the wrist and hand. Nearly 50% of all work-related injuries are linked to carpal tunnel syndrome, and people with this injury are more likely to miss work because of it. Patients with carpal tunnel syndrome can be treated with physical therapy or surgery. Although surgery may be considered when the symptoms are severe, more than a third of patients do not return to work within 8 weeks after an operation. Based on the potential side effects and risks of surgery, patients often ask if they might try physical therapy first. An article in the March 2017 issue of JOSPT assesses the effectiveness of therapy and surgery to treat carpal tunnel syndrome. J Orthop Sports Phys Ther 2017;47(3):162. doi:10.2519/jospt.2017.0503.
Shetty, V; Agrawal, R K; Sailer, H F
2017-08-01
The objective of this study was to investigate the long-term effect of presurgical nasoalveolar molding (PNAM) on growth of the maxillary arch through early childhood until 6 years of age in complete unilateral cleft lip and palate (UCLP) patients presenting for PNAM at different ages. Complete UCLP patients who were treated at our centre were divided into two groups. The study group underwent PNAM and was further subdivided into three subgroups (PNAM initiated within 1 month, between 1 and 6 months, and between 6 and 12 months of age in subgroup I, II, and III, respectively). The control group did not undergo PNAM and was further subdivided into three subgroups. Patients were evaluated at T1 (first visit), T2 (before cheiloplasty), and T3 (at 6 years). Between T1and T2, the intersegment distance (ISD) reduced significantly in the study group but increased in the control group, whereas the intercanine width (ICW) in both the study and control groups did not show significant change. Between T2 and T3, ISD and ICW were reduced significantly in the control group due to arch collapse, whereas in the study group, ISD reduced slightly with ICW remaining almost similar to noncleft norms. We conclude that reduced ISD following PNAM improves arch symmetry and stability, and thus may prevent arch collapse in the long term. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal scaphoid polymer prosthesis. 888.3760 Section 888.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...
21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal trapezium polymer prosthesis. 888.3770 Section 888.3770 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...
21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal lunate polymer prosthesis. 888.3750 Section 888.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...
21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Wrist joint carpal lunate polymer prosthesis. 888.3750 Section 888.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...
21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Wrist joint carpal trapezium polymer prosthesis. 888.3770 Section 888.3770 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...
21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Wrist joint carpal scaphoid polymer prosthesis. 888.3760 Section 888.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...
21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Wrist joint carpal lunate polymer prosthesis. 888.3750 Section 888.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...
21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Wrist joint carpal trapezium polymer prosthesis. 888.3770 Section 888.3770 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...
21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Wrist joint carpal scaphoid polymer prosthesis. 888.3760 Section 888.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...
21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Wrist joint carpal trapezium polymer prosthesis. 888.3770 Section 888.3770 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...
21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Wrist joint carpal lunate polymer prosthesis. 888.3750 Section 888.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...
21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Wrist joint carpal scaphoid polymer prosthesis. 888.3760 Section 888.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...
21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Wrist joint carpal lunate polymer prosthesis. 888.3750 Section 888.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...
21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Wrist joint carpal scaphoid polymer prosthesis. 888.3760 Section 888.3760 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...
21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Wrist joint carpal trapezium polymer prosthesis. 888.3770 Section 888.3770 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...
Filius, Anika; Scheltens, Marjan; Bosch, Hans G.; van Doorn, Pieter A.; Stam, Henk J.; Hovius, Steven E.R.; Amadio, Peter C.; Selles, Ruud W.
2015-01-01
Dynamics of structures within the carpal tunnel may alter in carpal tunnel syndrome (CTS) due to fibrotic changes and increased carpal tunnel pressure. Ultrasound can visualize these potential changes, making ultrasound potentially an accurate diagnostic tool. To study this, we imaged the carpal tunnel of 113 patients and 42 controls. CTS severity was classified according to validated clinical and nerve conduction study (NCS) classifications. Transversal and longitudinal displacement and shape (changes) were calculated for the median nerve, tendons and surrounding tissue. To predict diagnostic value binary logistic regression modeling was applied. Reduced longitudinal nerve displacement (p≤0.019), increased nerve cross-sectional area (p≤0.006) and perimeter (p≤0.007), and a trend of relatively changed tendon displacements were seen in patients. Changes were more convincing when CTS was classified as more severe. Binary logistic modeling to diagnose CTS using ultrasound showed a sensitivity of 70-71% and specificity of 80-84%. In conclusion, CTS patients have altered dynamics of structures within the carpal tunnel. PMID:25865180
Kofler, J; Peterbauer, C
2014-01-01
This case report describes the clinical and radiographic findings and the surgical treatment of a serofibrinous arthritis of the antebrachiocarpal joint and of a chronic purulent arthritis of the intercarpal and carpometacarpal joints with osteomyelitis of the distal carpal bones and subchondral osteomyelitis of the proximal metacarpal bones in a cow of the breed "Pustertaler Sprinze". The therapy comprised an arthrotomy of both joint spaces and the resection of the distal row of the carpal bones. The right forelimb had been immobilised for 70 days by a full limb cast. After this period, radiographs revealed an ob- vious ankylosis of the carpal joint, and the cow showed only a slight lameness. Six years postoperatively this cow was still in the herd and had produced six calves.
Oliveira, Dauro Douglas; Bartolomeo, Flávia Uchôa Costa; Cardinal, Lucas; Figueiredo, Daniel Santos Fonseca; Palomo, Juan Martin; Andrade, Ildeu
2014-11-01
Cleft lip and palate patients commonly present maxillary constriction, particularly in the anterior region. The aim of this case report was to describe an alternative clinical approach that used a smaller Hyrax screw unconventionally positioned to achieve greater anterior than posterior expansion in patients with complete unilateral cleft lip and palate. The idea presented here is to take advantage of a reduced dimension screw to position it anteriorly. When only anterior expansion was needed (patient 1), the appliance was soldered to the first premolar bands and associated to a transpalatal arch cemented to the first molars. However, when overall expansion was required (patient 2), the screw was positioned anteriorly, but soldered to the first molar bands. Intercanine, premolar, and first molar widths were measured on dental casts with a digital caliper. Pre-expansion and postexpansion radiographs and tomographies were also evaluated. A significant anterior expansion and no intermolar width increase were registered in the first patient. Although patient 2 also presented a greater anterior than posterior expansion, a noteworthy expansion occurred at the molar region. The alternative approach to expand the maxilla in cleft patients reported here caused greater anterior than posterior expansion when the Mini-Hyrax was associated to a transpalatal arch, and its reduced dimension also minimized discomfort and facilitated hygiene.
[Carpal canal ultrasound examination in patients with mild hand-arm vibration disease].
Liu, Y Z; Ye, Z H; Yang, W L; Zhu, J X; Lu, Q J; Su, W L
2016-08-20
Objective: To investigate the clinical value of ultrasound examination of carpal canal structure in patients with mild hand-arm vibration disease. Methods: A total of 29 patients (58 wrists) with mild hand-arm vibration disease who were treated in Shenzhen Prevention and Treatment Center for Occupational Diseases from May to December, 2015 were enrolled as observation group, and 20 healthy volunteers (40 wrists) were enrolled as the control group. Color Doppler ultrasound was used to observe the morphology and echo of the median nerve in the carpal canal and 9 muscle tendons and transverse carpal ligament. The thickness of transverse carpal ligament and diameter of the median nerve at the level of the hamulus of hamate bone were measured, as well as the cross-sectional area of the median nerve at the level of pisiform bone. Results: In the 29 patients with hand-arm vibration disease patients in the observation group, 8 experienced entrapment of the median nerve in the carpal canal, among whom 5 had entrapment in both wrists; there were 13 wrists (23%) with nerve entrapment and 45 wrists (77%) without nerve entrapment. Compared with the control group, the patients with hand-arm vibration disease and nerve entrapment in the observation group showed significant thickening of the transverse carpal ligament at the level of the hamulus of hamate bone and a significant increase in the cross-sectional area of the median nerve at the level of pisiform bone ( P <0.05) , while there were no significant differences in the thickness of transverse carpal ligament at the level of the hamulus of hamate bone and the cross-sectional area of the median nerve at the level of pisiform bone ( t=- 9.397 and -4.385, both P >0.05) . Conclusion: Ultrasound examination can clearly show the radiological changes of carpal canal contents in patients with mild hand-arm vibration disease and has a certain diagnostic value in nerve damage in patients with hand-arm vibration disease.
Valenza, Marie Carmen; Castro-Martín, Eduardo; Valenza, Gerad; Guirao-Piñeiro, Miguel; De-la-Llave-Rincón, Ana Isabel; Fernández-de-las-Peñas, César
2012-02-01
The curricula of all health professionals have an important foundation of human anatomy. A comparison of the anatomy retention between students from different curricula has not been studied. Our aim was to examine the knowledge competency of third-year physical therapy and medical students in carpal bone anatomy. The testing was conducted on the third-year medical and physical therapy students at Universidad de Granada. Students were given 5 minutes to answer the carpal bone test, a test which requires the identification of the carpal bones in an illustration of the bony skeleton of carpal region. Differences in the distribution of the responses between groups were analyzed using the χ(2) test. One hundred thirty-four (n = 134) tests were analyzed (n = 54 [41%] physical therapy students, n = 80 [59%] medical students). Only 39 students correctly identified all of the carpal bones (42.6% physical therapy, 20% medical, P < .001). Physical therapy students correctly identified a greater number (P < .001) of carpal bones (mean ± SD, 5.8 ± 2.2) than medical students (mean ± SD, 3.1 ± 2.9). The capitate was the most frequently identified bone in both physical therapy (96%) and medical (46%) students (P < .001). The hamate bone was the least frequently identified bone by medical students (n = 29, or 36.3%), whereas the trapezoid bone was the least frequently identified bone by physical therapy students (n = 35, or 64.8%). There are few studies investigating anatomical knowledge levels between disciplines. This study found that physical therapy students exhibited better retention of anatomy of the carpal bones than medical students. Copyright © 2012 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.
Tajika, Tsuyoshi; Kobayashi, Tsutomu; Yamamoto, Atsushi; Kaneko, Tetsuya; Takagishi, Kenji
2013-11-01
First, we investigated the accuracy of carpal tunnel syndrome diagnosis by comparing the cross-sectional area of the median nerve measured at the level of proximal inlet of the carpal tunnel with that measured at the level of the distal radioulnar joint on sonography. Second, we evaluated the correlation between sonographic and neurophysiologic findings and clinical findings assessed by the Carpal Tunnel Syndrome Instrument of the Japanese Society for Surgery of the Hand (JSSH). Fifty wrists in 34 patients and 81 wrists in 45 healthy volunteers were examined. The proximal cross-sectional area and the difference (Δ) between the proximal and distal cross-sectional areas were calculated for each wrist. Nerve conduction velocity tests were performed for all patients with carpal tunnel syndrome. The proximal, distal, and Δ cross-sectional areas were compared for the two groups. We examined the correlation between the proximal, distal, and Δ areas, nerve conduction velocity findings, and JSSH scores in the patients. The diagnosis of carpal tunnel syndrome determined by the Δ cross-sectional area was more accurate than the diagnosis determined by the proximal area on receiver operating characteristic curve analysis (P = .006). Statistically significant correlations were found between proximal area, Δ area, and nerve conduction velocity findings (proximal, r = 0.45; P = .0013; Δ, r = 0.44; P = .001). The proximal and distal areas were positively correlated with the JSSH symptom severity score (proximal, r= 0.39; P= .005; distal, r = 0.35; P = .014). The cross-sectional area method using sonography has excellent performance for diagnosing carpal tunnel syndrome. It was useful for measuring the proximal and distal cross-sectional areas to evaluated the symptom severity and for calculating the Δ cross-sectional area to assess motor nerve damage in patients with carpal tunnel syndrome.
Global spectral graph wavelet signature for surface analysis of carpal bones
NASA Astrophysics Data System (ADS)
Masoumi, Majid; Rezaei, Mahsa; Ben Hamza, A.
2018-02-01
Quantitative shape comparison is a fundamental problem in computer vision, geometry processing and medical imaging. In this paper, we present a spectral graph wavelet approach for shape analysis of carpal bones of the human wrist. We employ spectral graph wavelets to represent the cortical surface of a carpal bone via the spectral geometric analysis of the Laplace-Beltrami operator in the discrete domain. We propose global spectral graph wavelet (GSGW) descriptor that is isometric invariant, efficient to compute, and combines the advantages of both low-pass and band-pass filters. We perform experiments on shapes of the carpal bones of ten women and ten men from a publicly-available database of wrist bones. Using one-way multivariate analysis of variance (MANOVA) and permutation testing, we show through extensive experiments that the proposed GSGW framework gives a much better performance compared to the global point signature embedding approach for comparing shapes of the carpal bones across populations.
The role of proprioception and neuromuscular stability in carpal instabilities.
Hagert, E; Lluch, A; Rein, S
2016-01-01
Carpal stability has traditionally been defined as dependent on the articular congruity of joint surfaces, the static stability maintained by intact ligaments, and the dynamic stability caused by muscle contractions resulting in a compression of joint surfaces. In the past decade, a fourth factor in carpal stability has been proposed, involving the neuromuscular and proprioceptive control of joints. The proprioception of the wrist originates from afferent signals elicited by sensory end organs (mechanoreceptors) in ligaments and joint capsules that elicit spinal reflexes for immediate joint stability, as well as higher order neuromuscular influx to the cerebellum and sensorimotor cortices for planning and executing joint control. The aim of this review is to provide an understanding of the role of proprioception and neuromuscular control in carpal instabilities by delineating the sensory innervation and the neuromuscular control of the carpus, as well as descriptions of clinical applications of proprioception in carpal instabilities. © The Author(s) 2015.
Zimmerman, Gregory R.
1994-01-01
Carpal tunnel syndrome is a neuropathy resulting from compression of the median nerve as it passes through a narrow tunnel in the wrist on its way to the hand. The lack of precise objective and clinical tests, along with symptoms that are synonymous with other syndromes in the upper extremity, cause carpal tunnel syndrome to appear to be a rare entity in athletics. However, it should not be ruled out as a possible etiology of upper extremity paralysis in the athlete. More typically, carpal tunnel syndrome is the most common peripheral entrapment neuropathy encountered in industry. Treatment may include rest and/or splinting of the involved wrist, ice application, galvanic stimulation, or iontophoresis to reduce inflammation, and then transition to heat modalities and therapeutic exercises for developing flexibility, strength, and endurance. In addition, an ergonomic assessment should be conducted, resulting in modifications to accommodate the carpal tunnel syndrome patient. ImagesFig 3.Fig 4.Fig 5.Fig 6.Fig 7. PMID:16558255
Global spectral graph wavelet signature for surface analysis of carpal bones.
Masoumi, Majid; Rezaei, Mahsa; Ben Hamza, A
2018-02-05
Quantitative shape comparison is a fundamental problem in computer vision, geometry processing and medical imaging. In this paper, we present a spectral graph wavelet approach for shape analysis of carpal bones of the human wrist. We employ spectral graph wavelets to represent the cortical surface of a carpal bone via the spectral geometric analysis of the Laplace-Beltrami operator in the discrete domain. We propose global spectral graph wavelet (GSGW) descriptor that is isometric invariant, efficient to compute, and combines the advantages of both low-pass and band-pass filters. We perform experiments on shapes of the carpal bones of ten women and ten men from a publicly-available database of wrist bones. Using one-way multivariate analysis of variance (MANOVA) and permutation testing, we show through extensive experiments that the proposed GSGW framework gives a much better performance compared to the global point signature embedding approach for comparing shapes of the carpal bones across populations.
Global point signature for shape analysis of carpal bones
NASA Astrophysics Data System (ADS)
Chaudhari, Abhijit J.; Leahy, Richard M.; Wise, Barton L.; Lane, Nancy E.; Badawi, Ramsey D.; Joshi, Anand A.
2014-02-01
We present a method based on spectral theory for the shape analysis of carpal bones of the human wrist. We represent the cortical surface of the carpal bone in a coordinate system based on the eigensystem of the two-dimensional Helmholtz equation. We employ a metric—global point signature (GPS)—that exploits the scale and isometric invariance of eigenfunctions to quantify overall bone shape. We use a fast finite-element-method to compute the GPS metric. We capitalize upon the properties of GPS representation—such as stability, a standard Euclidean (ℓ2) metric definition, and invariance to scaling, translation and rotation—to perform shape analysis of the carpal bones of ten women and ten men from a publicly-available database. We demonstrate the utility of the proposed GPS representation to provide a means for comparing shapes of the carpal bones across populations.
Nonsurgically treated carpal tunnel syndrome in the manual worker.
Monsivais, J J; Bucher, P A; Monsivais, D B
1994-10-01
This study evaluates the course of carpal tunnel syndrome in a group of manual laborers who declined surgery for personal or social reasons. Thirty-five patients and 67 extremities with carpal tunnel syndrome were evaluated in a group of manual laborers. The carpal tunnel syndrome was classified as mild, moderate, or severe on the basis of initial evaluation data. Sensory batteries, motor and sensory conduction velocities, and electrical studies were performed on a scheduled basis. Follow-up ranged between 14 and 58 months, with an average of 34.3 months. Three patients became worse and one improved during the study period. All others remained unchanged. Six patients returned to work, but only three returned to their original jobs. Although carpal tunnel syndrome does not appear to be a progressive condition once the triggering cause is removed, nonsurgical treatment does not seem to be the treatment of choice for patients who must continue in a manual labor position.
Cheung, Kevin; Klausmeyer, Melissa A; Jupiter, Jesse B
2017-11-01
The development of Complex Regional Pain Syndrome (CRPS) represents a potentially devastating complication following carpal tunnel release. In the presence of a suspected incomplete release of the transverse carpal ligament or direct injury to the median nerve, neurolysis as well as nerve coverage to prevent recurrent scar has been shown to be effective. Retrospective chart review and telephone interview was conducted for patients who underwent abductor digiti minimi flap coverage and neurolysis of the median nerve for CRPS following carpal tunnel release. Fourteen wrists in 12 patients were reviewed. Mean patient age was 64 years (range, 49-83 years), and the mean follow-up was 44 months. Carpal tunnel outcome instrument scores were 47.4 ± 6.8 preoperatively and 27.1 ± 10.6 at follow-up ( P < .001). Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) scores at follow-up were 29.4 ± 26. No significant postoperative complications were identified. The abductor digiti minimi flap is a reliable option with minimal donor site morbidity. It provides predictable coverage when treating CRPS following carpal tunnel syndrome.
Atraumatic acute carpal tunnel syndrome in a patient taking dabigatran.
Sibley, Paul A; Mandel, Richard J
2012-08-01
Acute carpal tunnel syndrome is an uncommon diagnosis most often related to blunt trauma requiring immediate surgical decompression to avoid serious sequelae. Patients who present with bleeding-related acute carpal tunnel syndrome tend to have severe pain, rapid onset of swelling, and neurologic symptoms that appear early and progress rapidly secondary to mass effect. Acute carpal tunnel syndrome can occur in anticoagulated patients spontaneously or after minor trauma. This article describes a case of a 57-year-old man with progressive pain and paresthesias in the median nerve distribution after reaching for a picture frame. He was taking dabigatran, a direct thrombin inhibitor, for atrial fibrillation. He developed acute carpal tunnel syndrome secondary to spontaneous bleeding into the carpal canal and flexor tenosynovium with hematoma formation requiring surgical decompression. He reported immediate pain relief postoperatively, had no further bleeding complications, and regained full median nerve function within 2 months.Dabigatran has gained recent popularity for the treatment of atrial fibrillation. Unlike warfarin, its use does not involve regular laboratory monitoring or dose titration. The risks and benefits of dabigatran should be considered carefully by the prescriber, particularly in patients taking medications that may alter its metabolism. Aspirin and nonsteroidal anti-inflammatory drugs may have effects similar to dabigatran and may increase the risk of bleeding problems. Should acute carpal tunnel syndrome occur, the authors recommend prompt surgical decompression rather than conservative management. The modification of anticoagulant therapy should be considered on a case-by-case basis. Copyright 2012, SLACK Incorporated.
Relationship between static foot posture and foot mobility
2011-01-01
Background It is not uncommon for a person's foot posture and/or mobility to be assessed during a clinical examination. The exact relationship, however, between static posture and mobility is not known. Objective The purpose of this study was to determine the degree of association between static foot posture and mobility. Method The static foot posture and foot mobility of 203 healthy individuals was assessed and then analyzed to determine if low arched or "pronated" feet are more mobile than high arched or "supinated" feet. Results The study demonstrated that those individuals with a lower standing dorsal arch height and/or a wider standing midfoot width had greater mobility in their foot. In addition, those individuals with higher Foot Posture Index (FPI) values demonstrated greater mobility and those with lower FPI values demonstrated less mobility. Finally, the amount of foot mobility that an individual has can be predicted reasonably well using either a 3 or 4 variable linear regression model. Conclusions Because of the relationship between static foot posture and mobility, it is recommended that both be assessed as part of a comprehensive evaluation of a individual with foot problems. PMID:21244705
Fernandes, Thais Maria Freire; Sathler, Renata; Natalício, Gabriela Letícia; Henriques, José Fernando Castanha; Pinzan, Arnaldo
2013-01-01
To observe the presence of sexual dimorphism and compare the mesiodistal width of the teeth in Caucasian, African and Japanese individuals with Brazilian ancestry not orthodontically treated and with normal occlusion. One hundred pairs of dental casts were used. It was measured, from first molar to first molar in both arches, the teeth's mesiodistal widths, using a digital caliper. For the statistical analysis of results Kolmogorov-Smirnov, t test, ANOVA and Tukey's test (p < 0.05) were used. Sexual dimorphism occurred on the three evaluated groups, and the highest mesiodistal widths were found in males. There was statistically significant difference between racial groups in all evaluated teeth in males. However, in females, this same difference was found only on upper lateral incisor and first molar; and lower lateral incisor, canine, first premolar and first molar. Most of mesiodistal measures present particular characteristics in relation to gender, with higher values for males, and to race, with a tendency for African to present greater mesiodistal distance of the teeth, followed by Japanese and Caucasians, respectively, important for the correct diagnosis and orthodontic planning.
Characterizing saccular aortic arch aneurysms from the geometry-flow dynamics relationship.
Natsume, Kayoko; Shiiya, Norihiko; Takehara, Yasuo; Sugiyama, Masataka; Satoh, Hiroshi; Yamashita, Katsushi; Washiyama, Naoki
2017-06-01
Low wall shear stress (WSS) has been reported to be associated with accelerated atherosclerosis, aneurysm growth, or rupture. We evaluated the geometry of aortic arch aneurysms and their relationship with WSS by using the 4-dimensional flow magnetic resonance imaging to better characterize the saccular aneurysms. We analyzed the geometry in 100 patients using multiplanar reconstruction of computed tomography. We evaluated WSS and vortex flow using 4-dimensional flow magnetic resonance imaging in 16 of them, which were compared with 8 age-matched control subjects and eight healthy young volunteers. Eighty-two patients had a saccular aneurysm, and 18 had a fusiform aneurysm. External diameter/aneurysm length ratio and sac depth/neck width ratio of the fusiform aneurysms were constant at 0.76 ± 0.18 and 0.23 ± 0.09, whereas those of saccular aneurysms, especially those involving the outer curvature, were higher and more variable. Vortex flow was always present in the aneurysms, resulting in low WSS. When the sac depth/neck width ratio was less than 0.8, peak WSS correlated inversely with luminal diameter even in the saccular aneurysms. When this ratio exceeded 0.8, which was the case only with the saccular aneurysms, such correlation no longer existed and WSS was invariably low. Fusiform aneurysms elongate as they dilate, and WSS is lower as the diameter is larger. Saccular aneurysms dilate without proportionate elongation, and they, especially those occupying the inner curvature, have higher and variable sac depth/neck width ratio. When this ratio exceeds 0.8, WSS is low regardless of diameter, which may explain their malignant clinical behavior. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.
The use of small (2.7 mm) screws for arthroscopically guided repair of carpal chip fractures.
Wright, I M; Smith, M R W
2011-05-01
Removal of large chip fractures of the carpal bones and the osteochondral deficits that result, have been associated with a worse prognosis than removal of small fragments in similar locations. Reducing the articular defects by repair of large osteochondral fragments may have advantages over removal. Horses with osteochondral chip fractures that were of sufficient size and infrastructure to be repaired with small (2.7 mm diameter) AO/ASIF cortex screws were identified and repair effected by arthroscopically guided internal fixation. Thirty-three horses underwent surgery to repair 35 fractures of the dorsodistal radial carpal bone (n = 25), the dorsal margin of the radial facet of the third carpal bone (n = 9) and the intermediate facet of the distal radius (n = 1). There were no surgical complications and fractures healed satisfactorily in 26 of 28 horses and 23 horses returned to racing performance. Arthroscopically guided repair of carpal chip fractures with small diameter cortex screws is technically feasible and experiences with 33 cases suggest that this may have advantages over fragment removal in managing such cases. Surgeons treating horses with large chip fractures of the carpal bones should consider arthroscopically guided internal fixation as an alternative to removal. © 2010 EVJ Ltd.
[RESEARCH PROGRESS OF BIOMECHANICS OF PROXIMAL ROW CARPAL INSTABILITY].
Guo, Jinhai; Huang, Fuguo
2015-01-01
To review the research progress of the biomechanics of proximal row carpal instability (IPRC). The related literature concerning IPRC was extensively reviewed. The biomechanical mechanism of the surrounding soft tissue in maintaining the stability of the proximal row carpal (PRC) was analyzed, and the methods to repair or reconstruct the stability and function of the PRC were summarized from two aspects including basic biomechanics and clinical biomechanics. The muscles and ligaments of the PRC are critical to its stability. Most scholars have reached a consensus about biomechanical mechanism of the PRC, but there are still controversial conclusions on the biomechanics mechanism of the surrounding soft tissue to stability of distal radioulnar joint when the triangular fibrocartilage complex are damaged and the biomechanics mechanism of the scapholunate ligament. At present, there is no unified standard about the methods to repair or reconstruct the stability and function of the PRC. So, it is difficult for clinical practice. Some strides have been made in the basic biomechanical study on muscle and ligament and clinical biomechanical study on the methods to repair or reconstruct the stability and function of PRC, but it will be needed to further study the morphology of carpal articular surface and the adjacent articular surface, the pressure of distal carpals to proximal carpal and so on.
Laronde, Pascale; Christiaens, Nicolas; Aumar, Aurélien; Chantelot, Christophe; Fontaine, Christian
2016-04-01
Proximal row carpectomy (PRC) and four-corner arthrodesis (4CA) are the two most commonly performed surgical procedures to treat wrist arthritis. Postoperative strength is one of the criteria for choosing between the two techniques. Some authors believe that strength is correlated with residual carpal height. The goal of this study was to determine if postoperative carpal height was predictive of postoperative strength. This study consisted of two parts: a clinical evaluation of grip strength after 4CA or PRC; anatomical and radiological measurements of carpal height before and after 4CA or PRC. Grip strength was better preserved after PRC (87.5%) than after 4CA (76.1%), when expressed relative to the opposite hand (P=0.053). There was a significant decrease in carpal height for the PRC group with a Youm's index of 0.37 versus 0.50 for the 4CA group (P<0.0001). Our clinical results and analysis of the literature indicate that 4CA is not superior to PRC when it comes to grip strength, whereas carpal height is significantly decreased after PRC. The decreased tendon excursion after PRC is balanced by an increase in joint stresses after 4CA. Copyright © 2016 SFCM. Published by Elsevier Masson SAS. All rights reserved.
Finite element simulation of the mechanical impact of computer work on the carpal tunnel syndrome.
Mouzakis, Dionysios E; Rachiotis, George; Zaoutsos, Stefanos; Eleftheriou, Andreas; Malizos, Konstantinos N
2014-09-22
Carpal tunnel syndrome (CTS) is a clinical disorder resulting from the compression of the median nerve. The available evidence regarding the association between computer use and CTS is controversial. There is some evidence that computer mouse or keyboard work, or both are associated with the development of CTS. Despite the availability of pressure measurements in the carpal tunnel during computer work (exposure to keyboard or mouse) there are no available data to support a direct effect of the increased intracarpal canal pressure on the median nerve. This study presents an attempt to simulate the direct effects of computer work on the whole carpal area section using finite element analysis. A finite element mesh was produced from computerized tomography scans of the carpal area, involving all tissues present in the carpal tunnel. Two loading scenarios were applied on these models based on biomechanical data measured during computer work. It was found that mouse work can produce large deformation fields on the median nerve region. Also, the high stressing effect of the carpal ligament was verified. Keyboard work produced considerable and heterogeneous elongations along the longitudinal axis of the median nerve. Our study provides evidence that increased intracarpal canal pressures caused by awkward wrist postures imposed during computer work were associated directly with deformation of the median nerve. Despite the limitations of the present study the findings could be considered as a contribution to the understanding of the development of CTS due to exposure to computer work. Copyright © 2014 Elsevier Ltd. All rights reserved.
Carvalho, Carlos E.; da Silva, Rubens A.; Gil, André W.; Oliveira, Márcio R.; Nascimento, Juliana A.; Pires-Oliveira, Deise A. A.
2015-01-01
[Purpose] The aim of this study was to compare age-related differences in balance and anthropometric posture measurements of the foot and to determine any relationship between them. [Subjects and Methods] Sixty-eight older and 42 younger adults participated in this study. Foot posture was tested for four domains: 1) hallux flexion and extension range of motion using a goniometer, 2) navicular height and 3) length of the foot using a pachymeter, and 4) footprint (width of forefoot, arch index and hallux valgus). Balance was tested under two conditions on a force platform: bipodal in 60-s trials and unipodal in 30-s trials. The sway area of the center of pressure and velocity in the anteroposterior and mediolateral directions were computed. [Results] Older individuals showed significantly poorer balance compared with younger adults under in the unipodal condition (center of pressure area 9.97 vs. 7.72 cm2). Older people presented a significantly lower hallux mobility and higher values for width of the forefoot and transverse arch index than younger adults. The correlations between all foot posture and center of pressure parameters varied across groups, from weak to moderate (r −0.01 to −0.46). Low hallux mobility was significantly related to higher center of pressure values in older people. [Conclusion] These results have clinical implications for balance and foot posture assessments. PMID:25931713
Carvalho, Carlos E; da Silva, Rubens A; Gil, André W; Oliveira, Márcio R; Nascimento, Juliana A; Pires-Oliveira, Deise A A
2015-03-01
[Purpose] The aim of this study was to compare age-related differences in balance and anthropometric posture measurements of the foot and to determine any relationship between them. [Subjects and Methods] Sixty-eight older and 42 younger adults participated in this study. Foot posture was tested for four domains: 1) hallux flexion and extension range of motion using a goniometer, 2) navicular height and 3) length of the foot using a pachymeter, and 4) footprint (width of forefoot, arch index and hallux valgus). Balance was tested under two conditions on a force platform: bipodal in 60-s trials and unipodal in 30-s trials. The sway area of the center of pressure and velocity in the anteroposterior and mediolateral directions were computed. [Results] Older individuals showed significantly poorer balance compared with younger adults under in the unipodal condition (center of pressure area 9.97 vs. 7.72 cm(2)). Older people presented a significantly lower hallux mobility and higher values for width of the forefoot and transverse arch index than younger adults. The correlations between all foot posture and center of pressure parameters varied across groups, from weak to moderate (r -0.01 to -0.46). Low hallux mobility was significantly related to higher center of pressure values in older people. [Conclusion] These results have clinical implications for balance and foot posture assessments.
Ferrari, Simona; Bellincampi, Marta; Sfondrini, M Francesca; Caprioglio, Alberto; Gandini, Paola
2014-03-01
The aim of this clinical prospective trial was to evaluate finishing effectiveness of stainless steel (SS) archwires versus titanium molybdenum alloy (TMA) archwires using SmartClip™ self-ligating brackets. Thirty-two patients were divided in two groups: a group of 21 (G1-SS) and a group of 12 (G2-TMA). The protocol consisted of two different finishing archwires coupled with self-ligating brackets: .019 × .025" SS archwires for G1-SS and .019 × .025" TMA archwires for G2-TMA. Lateral cephalometric radiographs obtained at the beginning (T1) and end (T2) of treatment were used to assess the changes in incisor inclination, and measurements of irregularity index (LII), interdental widths, arch length (AL) and arch depth (AD) were made on dental casts to investigate changes associated with crowding correction. No significant differences from T1 to T2 were found for incisors proclination and AL changes. Statistically significant differences were found for LII (higher decrease in G1-SS), maxillary AD (higher increase in G1-SS) and three interdental maxillary widths (higher in G1-SS). The statistically significant differences found were few and clinically negligible. Self-ligating brackets system coupled with .019 × .025" archwires showed good finishing effectiveness, but no clinically significant differences were found between SS and TMA. Copyright © 2013 CEO. Published by Elsevier Masson SAS. All rights reserved.
Henning, Troy; Lueders, Daniel; Chang, Kate; Yang, Lynda
2018-03-06
The prevalence of carpal tunnel syndrome (CTS) in patients with postpolio syndrome occurs at a rate of 22%. Irrespective of those with CTS, 74% of postpolio patients weight bear through their arms for ambulation or transfers. As open carpal tunnel release is performed along the weight-bearing region of the wrist, their functional independence may be altered while recovering. This case demonstrates that ultrasound-guided carpal tunnel release was successfully performed in a patient with postpolio syndrome allowing him to immediately weight bear through his hands after the procedure so he could recover at home. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
Wang, X; Zhang, J J; Yuan, F S; Wang, Y; Li, C H; Varrela, J E; Yue, J; Ge, L H
2018-06-18
To investigate the clinical effect of eruption guidance appliance in the treatment of anterior cross bite in mixed-dentition children. In the study,10 mixed-dentition children with anterior cross bite, totally 12 incisors, were selected. Alginate was used to take upper and lower dentition impression and make a hard plaster model,which served as the eruption guidance appliance for treatment. The pre- and post-operative dental casts were digitized with SmartOptics Activity 880 scanner,and the three-dimensional overlapping models were obtained by reverse engineering software,Geomagic Studio 2012,then the three-dimensional movements of the upper and lower incisors were analyzed using Imageware 13.2 software. The overbite and overjet were analyzed using the same methods. Measurement with copper wire was used to analyze the upper and lower arch length. Space analysis was the result by the sum of crown width minus the arch length. The crown width of unerupted permanent teeth was according to X-ray method to predict. The SPSS 17.0 software was used to analyze the pre- and post-operative measurements of the same child. The normality test of the measured data showed that it conformed to the normal distribution. Therefore,the t test and double side test were used,and the significance level was 0.05. The course of treatment was (5.6±2.7) months. During orthodontic treatment, the upper incisors moved mainly labially (P<0.001) in three-dimensional displacement, and the lower incisors moved mainly the same direction (P=0.025). During the treatment of eruption guidance appliance,the average overbite decreased (1.01±0.9) mm (t=-3.531, P=0.006), and the difference was statistically significant. There was no statistically significant difference between the pre- and post-operative average overjet (t=0.771, P=0.460). The severity of crowding in upper arch decreased (1.9±0.99) mm (t=-6.042, P<0.001),and that in lower arch decreased (1.9±0.74) mm (t=-8.143, P<0.001), both of the differences were statistically significant. The anterior cross bite in mixed dentition could be corrected by eruption guidance appliance, and at the same time, the normal overjet and overbite were established, and the teeth were aligned.
Martin, Joel R; Paclet, Florent; Latash, Mark L; Zatsiorsky, Vladimir M
2013-02-01
Carpal tunnel syndrome is a disorder caused by increased pressure in the carpal tunnel associated with repetitive, stereotypical finger actions. Little is known about in vivo geometrical changes in the carpal tunnel caused by motion at the finger joints and exerting a fingertip force. The hands and forearms of five subjects were scanned using a 3.0 T magnetic resonance imaging scanner. The metacarpophalangeal joint of the index finger was placed in: flexion, neutral and extension. For each joint posture subjects either produced no active force (passive condition) or exerted a flexion force to resist a load (~4.0 N) at the fingertip (active condition). Changes in the radii of curvature, position and transverse plane area of the flexor digitorum profundus tendons at the carpal tunnel level were measured. The radius of curvature of the flexor digitorum profundus tendons, at the carpal tunnel level, was significantly affected by posture of the index finger metacarpophalangeal joint (P<0.05) and the radii was significantly different between fingers (P<0.05). Actively producing force caused a significant shift (P<0.05) in the flexor digitorum profundus tendons in the ventral (palmar) direction. No significant change in the area of an ellipse containing the flexor digitorum profundus tendons was observed between conditions. The results show that relatively small changes in the posture and force production of a single finger can lead to significant changes in the geometry of all the flexor digitorum profundus tendons in the carpal tunnel. Additionally, voluntary force production at the fingertip increases the moment arm of the FDP tendons about the wrist joint. Copyright © 2012 Elsevier Ltd. All rights reserved.
Lorgelly, Paula K.; Dias, Joseph J.; Bradley, Mary J.; Burke, Frank D.
2005-01-01
OBJECTIVE: There is insufficient evidence regarding the clinical and cost-effectiveness of surgical interventions for carpal tunnel syndrome. This study evaluates the cost, effectiveness and cost-effectiveness of minimally invasive surgery compared with conventional open surgery. PATIENTS AND METHODS: 194 sufferers (208 hands) of carpal tunnel syndrome were randomly assigned to each treatment option. A self-administered questionnaire assessed the severity of patients' symptoms and functional status pre- and postoperatively. Treatment costs were estimated from resource use and hospital financial data. RESULTS: Minimally invasive carpal tunnel decompression is marginally more effective than open surgery in terms of functional status, but not significantly so. Little improvement in symptom severity was recorded for either intervention. Minimally invasive surgery was found to be significantly more costly than open surgery. The incremental cost effectiveness ratio for functional status was estimated to be 197 UK pounds, such that a one percentage point improvement in functioning costs 197 UK pounds when using the minimally invasive technique. CONCLUSIONS: Minimally invasive carpal tunnel decompression appears to be more effective but more costly. Initial analysis suggests that the additional expense for such a small improvement in function and no improvement in symptoms would not be regarded as value-for-money, such that minimally invasive carpal tunnel release is unlikely to be considered a cost-effective alternative to the traditional open surgery procedure. PMID:15720906
Comparison of carpal tunnel injection techniques: a cadaver study.
Ozturk, Kahraman; Esenyel, Cem Zeki; Sonmez, Mesut; Esenyel, Meltem; Kahraman, Sinan; Senel, Berna
2008-01-01
The purpose of the study was to evaluate the accuracy of injections into the carpal tunnel using three different portals in cadavers, and to define safe guidelines. In this study, 150 wrists of 75 cadavers (54 male, 21 female) were included. To compare three injection sites, 50 wrists of 25 cadavers were used for each technique; we used 23 gauge needles, and acrylic dye. The first injection technique: the needle was inserted 1cm proximal to the wrist crease and directed distally by roughly 45 in an ulnar direction through the flexor carpi radialis tendon. The second injection technique: the needle was inserted into the carpal tunnel from a point just ulnar to the palmaris longus tendon and 1cm proximal to the wrist crease. The third injection technique: the needle was inserted just distal to the distal skin crease of the wrist in line with the fourth ray. The first injection technique gave the highest accuracy rate, and this was also the safest injection site. Median nerve injuries caused by injection was seen mostly with the second technique. Although a steroid injection may provide symptomatic relief in patients with carpal tunnel syndrome, the median nerve and other structures in the carpal tunnel are at risk of injury. Because of that, the injection should be given using the correct technique by physicians skilled in carpal tunnel surgery.
Dernek, Bahar; Aydin, Tugba; Koseoglu, Pinar Kursuz; Kesiktas, Fatma Nur; Yesilyurt, Tugba; Diracoglu, Demirhan; Aksoy, Cihan
2017-01-01
Carpal tunnel syndrome (CTS) is a commonly seen peripheral nerve mononeuropathy. Corticosteroid injection within the carpal tunnel is among the conservative treatment options. The exact mechanism of action of steroids is not fully clear; decreased inflammation surrounding nerves or tendons is thought to be the main effect. Lidocaine has been shown to have anti-inflammatory effects on certain cells (monocytes, macrophages, neutrophils etc.). The aim of this study is to evaulate the efficacy of lidocaine treatment as a alternative to corticosteroid treatment in carpal tunnel syndrome. A total of 67 carpal tunnel syndrome patients who were diagnosed with physical examination and EMG were evaluated. Twenty-nine patients received a mixture of normal saline solution and lidocaine (0.5 cc of normal saline solution and 0.5 cc of lidocaine) while 38 patients were administered betamethasone dipropionate (1 cc). Quick DASH (Disabilities of the Arm, Shoulder and Hand) and Visual Analog Scale (VAS) scores were noted in 1st, 3rd and 6th month follow-ups. There were no significant difference between saline solution + Lidocaine group and betamethasone dipropionate groups; initial, 1st, 3rd and 6th month VAS scores and QDASH scores (p > 0.05). Considering the potential side effects of corticosteroid, lidocaine injection is a good alternative treatment of carpal tunnel syndrome instead of corticosteroids.
Evaluation of Associated Carpal Bone Fractures in Distal Radial Fractures
Heo, Youn Moo; Kim, Sang Bum; Yi, Jin Woong; Park, Cheol Yong; Yoon, Jeong Yong; Kim, Doo Hyun
2013-01-01
Background The purpose of this study was to investigate the frequency and distribution of associated carpal bone fractures (CBFs) in distal radial fractures (DRFs). Methods Three hundred and thirteen patients who underwent surgical treatment for DRFs between March 2007 and January 2010 were reviewed retrospectively. In this study, 223 patients who had preoperative computed tomography (CT) were included. We investigated the frequency and distribution of associated CBFs on CT scans. The relationship between the frequency of associated CBFs and patient factors such as age, gender, body mass index, and the mechanism of injury was assessed. Results CBFs were complicated in 46 of 223 DRFs (20.9%). The distribution of CBFs was 23 cases in the triquetrum, 16 in the lunate, 12 in the scaphoid, five in the hamate, and four in the pisiform. Among the 46 cases, a fracture of one carpal bone occurred in 36 cases, two in seven cases, three in two cases, and four in one case. In 10 of the 46 cases, associated CBFs occurred in more than two carpal bones. No significant differences were observed for age, sex, body mass index, or the mechanism of injury between patients with DRFs and CBFs and those without CBFs. Conclusions Because CBFs that mainly occur in the proximal carpal row are complicated in DRFs at a relatively high frequency, assessment of carpal bones using CT scans is beneficial. PMID:23730472
Prasad, C N; Marsh, J L; Long, R E; Galic, M; Huebener, D V; Bresina, S J; Vannier, M W; Pilgram, T K; Mazaheri, M; Robison, S; Bartell, T
2000-11-01
A two-institution retrospective study was undertaken to determine whether two different prepalatoplasty protocols quantitatively affect maxillary arch morphology in infants with complete unilateral cleft lip and palate (UCLP). Serial maxillary dental casts, obtained at regular intervals through the first 18 months of life from preintervention until palatoplasty were evaluated quantitatively using computer-assisted three-dimensional digitization and analysis for three populations: institution 1 (protocol 1), institution 2 (protocol 2), and unaffected individuals (neither cleft nor treatment). Sequential UCLP patients from institution 1 were matched for age and initial alveolar cleft width, sex and cleft side having been demonstrated to be nonsignificant, with UCLP patients from institution 2 and to unaffected individuals for age for the analysis. Both treatment institutions are well-established regional interdisciplinary cleft centers. Institution 1 is located in a tertiary, academic children's hospital in a metropolis within a primarily agrarian region of the Midwest; institution 2 is a freestanding private clinic located in a small city within a primarily agrarian region of an eastern state; the unaffected population is a historic archive acquired in the 1930s. Data acquisition (model digitization) and computer processing were performed at institution 1. Eighty-five casts of 28 infants from institution 1, 106 casts of 31 infants from institution 2, and 68 casts of 29 unaffected infants were analyzed. All infants had alginate impressions taken prior to intervention and at several additional 6-month intervals after that, consistent with each institution's treatment protocol. At institution 1, patients with UCLP underwent lip adhesion and placement of a passive alveolar molding plate at 7 weeks of age, definitive cheiloplasty at 7 months of age, and one-stage palatoplasty at 14 months of age. At institution 2, patients with UCLP underwent definitive cheiloplasty at 3 months of age, had no maxillary orthopedics, and had vomer flap hard palate repair at 12 months of age and soft palate repair at 18 months of age. The outcome measures included directly digitized (cleft segment and hemialveolar ridge lengths) and derived (alveolar base width, alveolar cleft gap, maxillary frenum-alveolar base perpendicular angle, and rates of change over time of digitized cleft segment and hemialveolar ridge lengths) features. The data were assessed by comparing simple linear regression lines and an unpaired, two-tailed t test. Prior to initiating therapy, there were no statistically significant differences between the two populations with clefts. However, both populations with clefts differed significantly from unaffected individuals (p < .001), with increased maxillary base widths and larger perpendicular/frenum angles. At the time of palatoplasty, the two populations with clefts had statistically significant differences between them in the maxillary base width (p < .01) and the cleft gap distance (p < .05). The base width of institution 1 did not differ significantly from that of widths of unaffected children, and that of institution 2 was significantly less, although the latter had already received first-stage palate repair. Alveolar segment growth rates were similar for the greater and lesser segments, respectively, and the left side hemialveolus of both groups. The growth rate for the noncleft side hemialveolus of institution 2 exceeded (p < .05) that of both institution 1 and unaffected patients. Two different regimens for the initial management of UCLP can significantly affect maxillary alveolar arch growth with respect to the treatment used and in comparison with unaffected controls.
... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
Minimally Invasive Ultrasound-Guided Carpal Tunnel Release: Preliminary Clinical Results.
Henning, P Troy; Yang, Lynda; Awan, Tariq; Lueders, Daniel; Pourcho, Adam M
2018-04-02
Ultrasound-guided carpal tunnel release was performed on 14 patients (18 wrists) using dynamic expansion of the transverse safe zone. Our patient population included able-bodied patients and those with impairments. The first 8 cases (12 wrists) underwent the procedure in an operating room, the remainder in an outpatient setting. No complications occurred, and all patients were able to immediately resume use of their hands without therapy. Improvements in the Quick Form of the Disabilities of the Arm, Shoulder, and Hand Index and Boston Carpal Tunnel Questionnaire at 3 months were comparable to results reported with mini-open and endoscopic release. Our results show that ultrasound-guided carpal tunnel release can be safely and effectively performed in an outpatient setting. © 2018 by the American Institute of Ultrasound in Medicine.
Analysis of flexible layered shallow shells on elastic foundation
NASA Astrophysics Data System (ADS)
Stupishin, L.; Kolesnikov, A.; Tolmacheva, T.
2017-05-01
This paper contains numerical analysis of a layered geometric nonlinear flexible shallow shell based on an elastic foundation. Rise of arch in the center of the shell, width, length and type of support are given. The design variable is taken to be the thickness of the shallow shell, the form of the middle surface forming and the characteristic of elastic foundations. Critical force coefficient and stress of shells are calculated by Bubnov-Galerkin. Stress, characteristic of elastic foundations - thickness dependence are presented.
Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil
2013-01-24
The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.
Characteristics of Selected Anthropometric Foot Indicators in Physically Active Students.
Bac, Aneta; Bogacz, Gabriela; Ogrodzka-Ciechanowicz, Katarzyna; Kulis, Aleksandra; Szaporów, Tomasz; Woźniacka, Renata; Radlińska, Natalia
2018-05-01
The aim of this study was to determine the type of medial longitudinal arch (MLA) in students of Krakow universities, investigate the relationship between physical activity and the shaping of the feet, and examine the relationship between hallux valgus angle and the type of footwear chosen most often. The study group consisted of 120 students, of which 56 respondents were students of the University School of Physical Education in Krakow, whereas the remaining 64 respondents were students of the Pedagogical University of Krakow. To evaluate the MLA, a podoscope was used, which allowed us to determine the length and width of the foot, and calculation of the Clarke angle, heel angle γ, and the angle of hallux valgus. All students were also subjected to a measurement of body weight and height. There was a statistically significant relationship between physical activity and the Clarke angle in the group of women studying at the University School of Physical Education. There was no correlation between the hallux valgus angle and the type of footwear chosen most often in the research groups. The most frequently diagnosed type of longitudinal and transverse arch foot in the research group was normal MLA. There was no relationship between physical activity and transverse arch foot in any of the research groups.
... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
Cost-Minimization Analysis of Open and Endoscopic Carpal Tunnel Release.
Zhang, Steven; Vora, Molly; Harris, Alex H S; Baker, Laurence; Curtin, Catherine; Kamal, Robin N
2016-12-07
Carpal tunnel release is the most common upper-limb surgical procedure performed annually in the U.S. There are 2 surgical methods of carpal tunnel release: open or endoscopic. Currently, there is no clear clinical or economic evidence supporting the use of one procedure over the other. We completed a cost-minimization analysis of open and endoscopic carpal tunnel release, testing the null hypothesis that there is no difference between the procedures in terms of cost. We conducted a retrospective review using a private-payer and Medicare Advantage database composed of 16 million patient records from 2007 to 2014. The cohort consisted of records with an ICD-9 (International Classification of Diseases, Ninth Revision) diagnosis of carpal tunnel syndrome and a CPT (Current Procedural Terminology) code for carpal tunnel release. Payer fees were used to define cost. We also assessed other associated costs of care, including those of electrodiagnostic studies and occupational therapy. Bivariate comparisons were performed using the chi-square test and the Student t test. Data showed that 86% of the patients underwent open carpal tunnel release. Reimbursement fees for endoscopic release were significantly higher than for open release. Facility fees were responsible for most of the difference between the procedures in reimbursement: facility fees averaged $1,884 for endoscopic release compared with $1,080 for open release (p < 0.0001). Endoscopic release also demonstrated significantly higher physician fees than open release (an average of $555 compared with $428; p < 0.0001). Occupational therapy fees associated with endoscopic release were less than those associated with open release (an average of $237 per session compared with $272; p = 0.07). The total average annual reimbursement per patient for endoscopic release (facility, surgeon, and occupational therapy fees) was significantly higher than for open release ($2,602 compared with $1,751; p < 0.0001). Our data showed that the total average fees per patient for endoscopic release were significantly higher than those for open release, although there currently is no strong evidence supporting better clinical outcomes of either technique. Value-based health-care models that favor delivering high-quality care and improving patient health, while also minimizing costs, may favor open carpal tunnel release.
Blæhr, Tue Lindberg
2016-01-01
ABSTRACT Objectives The objective of the present systematic review was to test the hypothesis of no difference in transverse skeletal and dental arch expansion and relapse after segmental Le Fort I osteotomy versus surgically assisted rapid maxillary expansion. Material and Methods A MEDLINE (PubMed), Embase and Cochrane library search in combination with a hand-search of relevant journals was conducted by including human studies published in English from January 1, 2000 to June 1, 2016. Results The search provided 130 titles and four studies fulfilled the inclusion criteria. All the included studies were characterized by high risk of bias and meta-analysis was not possible due to considerable variation. Both treatment modalities significantly increase the transverse maxillary skeletal and dental arch width. The transverse dental arch expansion and relapse seems to be substantial higher with tooth-borne surgically assisted rapid maxillary expansion compared to segmental Le Fort I osteotomy. The ratio of dental to skeletal relapse was significantly higher in the posterior maxilla with tooth-borne surgically assisted rapid maxillary expansion. Moreover, a parallel opening without segment tilting was observed after segmental Le Fort I osteotomy. Conclusions Maxillary transverse deficiency in adults can be treated successfully with both treatment modalities, although surgically assisted rapid maxillary expansion seems more effective when large transverse maxillary skeletal and dental arch expansion is required. However, considering the methodological limitations of the included studies, long-term randomized studies assessing transverse skeletal and dental expansion and relapse with the two treatment modalities are needed before definite conclusions can be provided. PMID:28154745
NASA Astrophysics Data System (ADS)
Wang, Q. Daniel; Dong, Hui; Lang, Cornelia
2006-09-01
The Galactic centre (GC) provides a unique laboratory for a detailed examination of the interplay between massive star formation and the nuclear environment of our Galaxy. Here, we present a 100-ks Chandra Advanced CCD Imaging Spectrometer (ACIS) observation of the Arches and Quintuplet star clusters. We also report on a complementary mapping of the dense molecular gas near the Arches cluster made with the Owens Valley Millimeter Array. We present a catalogue of 244 point-like X-ray sources detected in the observation. Their number-flux relation indicates an overpopulation of relatively bright X-ray sources, which are apparently associated with the clusters. The sources in the core of the Arches and Quintuplet clusters are most likely extreme colliding wind massive star binaries. The diffuse X-ray emission from the core of the Arches cluster has a spectrum showing a 6.7-keV emission line and a surface intensity profile declining steeply with radius, indicating an origin in a cluster wind. In the outer regions near the Arches cluster, the overall diffuse X-ray enhancement demonstrates a bow shock morphology and is prominent in the Fe Kα 6.4-keV line emission with an equivalent width of ~1.4 keV. Much of this enhancement may result from an ongoing collision between the cluster and the adjacent molecular cloud, which have a relative velocity >~120km-1. The older and less-compact Quintuplet cluster contains much weaker X-ray sources and diffuse emission, probably originating from low-mass stellar objects as well as a cluster wind. However, the overall population of these objects, constrained by the observed total diffuse X-ray luminosities, is substantially smaller than expected for both clusters, if they have normal Miller & Scalo initial mass functions. This deficiency of low-mass objects may be a manifestation of the unique star formation environment of the GC, where high-velocity cloud-cloud and cloud-cluster collisions are frequent.
Chiari Malformation: Diagnosis
... Chronic Fatigue, Lupus, Migraines, Carpal Tunnel Syndrome and ALS (Lou Gehrig’s). These associations cause confusion to the ... Sclerosis Fibromyalgia Chronic Fatigue Lupus Migraines Carpal Tunnel ALS (Lou Gehrig’s) Milhorat’s landmark study of over 300 ...
A new design concept for wrist arthroplasty.
Shepherd, D E T; Johnstone, A
2005-01-01
The wrist joint is frequently affected by arthritis, which leads to pain, loss of function and ultimately deformity. Various designs of wrist arthroplasty have been introduced to attempt to relieve pain and provide a functional range of motion. The first generation of wrist implant was a one-piece silicone elastomer. Later generations have designs that have two parts that articulate against each other. However, wrist implants have not achieved the same clinical success to date, compared with hip and knee implants, and there is a high revision rate associated with them. This paper describes a new design concept for wrist arthroplasty, based around the idea of combining the principles of an articulating implant with that of a flexible elastomer implant. The design consists of assembling a radial, carpal/metacarpal, plate and flexible parts together. The radial and carpal/metacarpal parts are to be made from ultra high molecular weight polyethylene. The bearing surfaces of the radial and carpal/metacarpal parts articulate against the flat surfaces of the plate, made from cobalt chrome molybdenum alloy. The radius on the bearing surface of the radial part enables flexion/extension, while the radius on the carpal/metacarpal surface enables radial/ulnar deviation. The articulation of the carpal/metacarpal part against the plate also allows for rotation as well as flexion/extension. The flexible part, made from Elast-Eon, which is a silicone polyurethane elastomer, is inserted through the hole of the plate and into the holes of the radial and carpal/metacarpal parts.
Akinbami, Babatunde O; Didia, Blessing C
2010-12-01
The aim of this study was to determine how some physical characteristics can be used to predict the occurrence of impacted mandibular third molars. While the concept of prophylactic removal of the asymptomatic erupting or impacted mandibular third molar has generated much controversy over the years, new theories of therapeutic surgical removal of the erupting tooth and therapeutic agenesis of the tooth bud are emerging. However, there are a few studies that address the anthropometric factors that could predict an impacted mandibular third molar. The study included Nigerian patients of both genders who were at least 16 years of age. A total of 83 subjects participated in the study; there were 44 (53 percent) females and 39 (47 percent) males. Eighty-one (97.6 percent) of the participants were between 16 and 23 years old, while 2 (2.4 percent) were between 30 and 39 years old, of which 44 (53 percent) were women and 39 (47 percent) were men. There were 38 (45.8 percent) cases of impaction and 45 (54.2 percent) cases of unimpacted third molar. The mean and standard deviation values of BMI for the two groups in males and females were 21.10±1.90, 22.40±2.70 and 22.00±2.40, 22.30±1.99 respectively, with no significant difference, p>0.05, CI 95%. The two determinant factors of impaction were mandibular length and the difference between alveolar arch length (p=0.04) and total teeth size. Both of these variables had significant inverse correlations with impaction values of p=0.04 and p=0.003, respectively. The prediction values were 59 percent for mandibular length and 81.9 percent for differences between mandibular length and teeth sizes, respectively. The synthesized prediction value by the two determinant factors is 75.6 percent.The subjects were divided into two categories: presence of impaction (Group 1) and absence of impaction (Group 2). Impaction of the mandibular third molar was assessed by clinical and radiographic evaluation. Body mass index (BMI) of each subject was determined by measuring the body weight (BW) and body height (BH), then dividing the weight of the body by the square of the height. The mandibular index (MI) was assessed by measuring the length and width of the mandible (MW). It was calculated by dividing the width of the mandible by the length of the mandible. The mandibular length (ML) consisted of the total teeth sizes of the three anterior teeth, the two premolars, and the first and second molars. These dimensions were measured with a divider/ruler and recorded. The anterior-posterior distance of the arch from the midline to the retromolar pad (alveolar arch length) also was measured. The prediction of mandibular third molar impaction was mainly dependent on two factors: the length of the mandible and the difference between arch length and total teeth size. Small mandible, small dental arch, and large teeth are risk factors that are strongly associated with the occurrence of impacted third molars.
Tat, Jimmy; Wilson, Katherine E; Keir, Peter J
2015-05-01
Fibrosis and thickening of the subysnovial connective tissue are the most common pathological findings in carpal tunnel syndrome. The relationship between subsynovial connective tissue characteristics and self-reported carpal tunnel syndrome symptoms was assessed. Symptoms were characterized using the Boston Carpal Tunnel Questionnaire and Katz hand diagram in twenty-two participants (11 with symptoms, 11 with no symptoms). Using ultrasound, the thickness of the subsynovial connective tissue was measured using a thickness ratio (subsynovial thickness/tendon thickness) and gliding function was assessed using a shear strain index ((Displacement(tendon)-Displacement(subsynovial))/Displacement(tendon)x 100). For gliding function, participants performed 10 repeated flexion-extension cycles of the middle finger at a rate of one cycle per second. Participants with symptoms had a 38.5% greater thickness ratio and 39.2% greater shear strain index compared to participants without symptoms (p<0.05). Ultrasound detected differences the SSCT in symptomatic group that was characterized by low self-reported symptom severity scores. This study found ultrasound useful for measuring structural and functional changes in the SSCT that could provide insight in the early pathophysiology associated with carpal tunnel syndrome symptoms. Copyright © 2015 Elsevier Ltd. All rights reserved.
Mutinelli, Sabrina; Manfredi, Mario; Guiducci, Antonio; Denotti, Gloria; Cozzani, Mauro
2015-01-01
Anchorage onto permanent dentition is a common procedure in rapid maxillary expansion. However, replacing first permanent molars with the second deciduous molars seems to be an option to reduce some negative side effects during orthodontic treatment. The purpose of this study was to evaluate the dental effect of rapid maxillary expansion with anchorage exclusively onto deciduous teeth performed in the first period of transition. Twenty patients with a lateral cross-bite treated exclusively by a Haas expander in early mixed dentition were retrospectively analyzed before treatment, at appliance removal, and at 21 months out of retention. The sagittal and transverse dimensions, together with the inter-canine arch and irregularity index, were digitally measured on scanned images of dental casts. The patients were compared with three balanced control groups (in total, 60 individuals) matched for gender. Two control groups had the same canine dental class as the treated group at T1, were in the inter-transitional period, and either had or lacked a lateral cross-bite. The last control group was comprised of adolescents in permanent dentition with a dental class I. The statistical analysis was performed by means of repeated-measures ANOVA for paired data and one-way ANOVA, the Kruskal-Wallis test, and the Mann-Whitney test for independent measures (α-level p < 0.05). At the end of follow-up (inter-transitional period of dentition), the dental arch dimensions of treated patients were similar to those of adolescents with a dental class I and significantly wider than those of patients with a lateral cross-bite. Also, the anterior irregularity index was lower among patients who had undergone expansion treatments than in all untreated study participants. The Haas expander anchored to the deciduous teeth is effective in increasing the dental arch width in patients with a lateral cross-bite. The dimensions of the dental arch were modified earlier toward the values of the permanent dentition.
Baka, Zeliha Muge; Akin, Mehmet; Ucar, Faruk Izzet; Ileri, Zehra
2015-01-01
The aims of this study were to quantitatively evaluate the changes in arch widths and buccolingual inclinations of the posterior teeth after asymmetric rapid maxillary expansion (ARME) and to compare the measurements between the crossbite and the noncrossbite sides with cone-beam computed tomography (CBCT). From our clinic archives, we selected the CBCT records of 30 patients with unilateral skeletal crossbite (13 boys, 14.2 ± 1.3 years old; 17 girls, 13.8 ± 1.3 years old) who underwent ARME treatment. A modified acrylic bonded rapid maxillary expansion appliance including an occlusal locking mechanism was used in all patients. CBCT records had been taken before ARME treatment and after a 3-month retention period. Fourteen angular and 80 linear measurements were taken for the maxilla and the mandible. Frontally clipped CBCT images were used for the evaluation. Paired sample and independent sample t tests were used for statistical comparisons. Comparisons of the before-treatment and after-retention measurements showed that the arch widths and buccolingual inclinations of the posterior teeth increased significantly on the crossbite side of the maxilla and on the noncrossbite side of the mandible (P <0.05). Comparison of the 2 sides showed statistically significant differences in both the maxilla and the mandible (P <0.05). After ARME treatment, the crossbite side of the maxilla and the noncrossbite side of the mandible were more affected than were the opposite sides. Copyright © 2015. Published by Elsevier Inc.
Corticosteroid injection for the treatment of carpal tunnel syndrome
O'Gradaigh, D; Merry, P
2000-01-01
OBJECTIVE—To compare low and high dose, and short and long acting corticosteroids in the treatment of carpal tunnel syndrome. METHODS—A randomised, controlled, single blind trial with electromyographic and subjective outcome measures. RESULTS—25 mg hydrocortisone is as effective as higher doses or long acting triamcinolone at a six week and six month follow up. CONCLUSION—As low dose steroid is as effective, and potentially less toxic, this should be the recommended dose for injection of carpal tunnel syndrome. PMID:11053073
Descriptive epidemiology of joint injuries in Thoroughbred racehorses in training.
Reed, S R; Jackson, B F; Mc Ilwraith, C W; Wright, I M; Pilsworth, R; Knapp, S; Wood, J L N; Price, J S; Verheyen, K L P
2012-01-01
No large scale epidemiological studies have previously quantified the occurrence of carpal, metacarpo- and metatarsophalangeal (MCP/MTP) joint injuries in Thoroughbred racehorses. To develop an objective classification system for carpal and MCP/MTP joint injuries and estimate the incidence of these injuries in young Thoroughbreds in flat race training. In a prospective cohort study, data on daily exercise and veterinary-diagnosed carpal and MCP/MTP joint injuries were collected from Thoroughbreds monitored since starting training as yearlings, for up to 2 years. Cases were classified in one of 4 categories: 1) localised to a carpal or MCP/MTP joint based on clinical examination and/or diagnostic analgesia; no diagnostic imaging performed; 2) localised to a carpal or MCP/MTP joint based on clinical examination and/or diagnostic analgesia; radiographs taken but no abnormalities detected; 3) evidence of abnormality of subchondral bone and/or articular margin(s) on diagnostic imaging and 4) evidence of discontinuity of the articular surface on diagnostic imaging. Incidence rates and rate ratios were estimated using Poisson regression, adjusting for trainer-level clustering. A total of 647 horses from 13 trainers throughout England contributed 7785 months at risk of joint injury. One-hundred-and-eighty-four cases of carpal (n = 82) or MCP/MTP (n = 102) joint injury were reported in 165 horses and classified in Category 1 (n = 21), Category 2 (n = 21), Category 3 (n = 72) or Category 4 (n = 70). The overall joint injury rate was 1.8 per 100 horse months (95% CI = 1.2, 2.8); rates did not differ significantly between 2- and 3-year-olds but females sustained Category 1 injuries at triple the rate of males (P = 0.03). Joint injury rates differed significantly between trainers (P<0.001) and there was trainer variation in anatomical site and severity of injury. Carpal and MCP/MTP joint injuries are an important cause of morbidity in Thoroughbred racehorses. Identification of modifiable risk factors for these injuries may reduce their incidence. © 2011 EVJ Ltd.
Hunter, Barbara; Duesterdieck-Zellmer, Katja F.; Huber, Michael J.; Parker, Jill E.; Semevolos, Stacy A.
2014-01-01
This study evaluated outcomes of surgical treatment for carpal valgus in New World camelids and correlated successful outcome (absence of carpal valgus determined by a veterinarian) with patient characteristics and radiographic features. Univariable and multivariable analyses of retrospective case data in 19 camelids (33 limbs) treated for carpal valgus between 1987 and 2010 revealed that procedures incorporating a distal radial transphyseal bridge were more likely (P = 0.03) to result in success after a single surgical procedure. A greater degree of angulation (> 19°, P = 0.02) and younger age at surgery (< 4 months, P = 0.03) were associated with unsuccessful outcome. Overall, 74% of limbs straightened, 15% overcorrected, and 11% had persistent valgus following surgical intervention. To straighten, 22% of limbs required multiple procedures, not including implant removal. According to owners, valgus returned following implant removal in 4 limbs that had straightened after surgery. PMID:25477542
Carpal Tunnel Syndrome Associated with Oral Bisphosphonates. A Population-Based Cohort Study
Carvajal, Alfonso; Martín Arias, Luis H.; Sáinz, María; Escudero, Antonio; Fierro, Inmaculada; Sauzet, Odile; Cornelius, Victoria R.; Molokhia, Mariam
2016-01-01
Background Bisphosphonates are widely used to prevent osteoporotic fractures. Some severe musculoskeletal reactions have been described with this medication; among them, some cases of carpal tunnel syndrome. Thus, the aim of this study was to explore whether bisphosphonates may be associated with this syndrome. Methods A cohort study was conducted to compare exposed to unexposed women; the exposed group was that composed of women having received at least one prescription of an oral bisphosphonate. For the purpose, we used information from The Health Improvement Network (THIN) database. The outcome of interest was defined as those women diagnosed with carpal tunnel syndrome. A survival analysis was performed; the Cox proportional hazard model was used to calculate hazard ratios and 95% confidence intervals, and to adjust for identified confounding variables. Results Out of a sample of 59,475 women older than 51 years, 19,825 were treated with bisphosphonates during the period studied. No differences in age distribution or mean follow-up time were observed between the two groups in comparison. Overall, there were 572 women diagnosed with carpal tunnel syndrome, 242 (1.2%) in the group exposed to bisphosphonates, and 330 (0.8%) in the unexposed. An adjusted hazard ratio of developing carpal tunnel syndrome of 1.38 (95%CI, 1.15–1.64) was found for women exposed to bisphosphonates; no significant changes in the hazard ratios were found when considering different levels of bisphosphonate exposure. Conclusions An increased risk of carpal tunnel syndrome is associated with the use of bisphosphonates in postmenopausal women. PMID:26765346
[Occupational carpal tunnel syndrome: 27 cases].
Slimane, Neila Ben; Elleuch, Mohamed; Gharbi, Ezzedine; Babay, Habib; Hamdoun, Moncef
2010-09-01
Carpal tunnel syndrome is the most frequent of tunnel syndromes in the field of the professional sphere. It is related to repetitive movements of flexion-extension of the wrist and fingers or to a support on the heel of the hands. To determine the posts in a risk and to specify the modalities of guaranteed reimbursement of professional carpal tunnel syndrome. A retrospective and descriptive study of 27 medical files of employees indemnified for professional carpal tunnel syndrome registered in the medical control services of the social security office in charge of medical insurance of Tunis and Sousse during a period of 10 years (1995-2004). There were 24 women and 3 men with the average age of 40 years all occupying posts in a risk. Their average time of service is 15 years. Tow-thirds of them work in the clothing and textile industry. The attack is bilateral in 13 cases. Nightly acroparaesthesia rules the clinical rate (44.44% of cases). Motor disorders are noted in the quarter of cases. The electromyogram had confirmed diagnosis in all of cases. The previous state study put in evidence the antecedent of carpal tunnel syndrome in 5 cases and diabetes in one case. Twenty-one patients had profit of permanent partial incapacity with a rate varying from 3 to 25%. Five had got a transfer of working place and one stayed in the same post with a half-time work. The professional origin of carpal tunnel syndrome must be called up in front of an activity in a risk. The reparation is done according to picture 82 of occupational diseases.
de la Llave-Rincón, Ana Isabel; Fernández-de-las-Peñas, César; Fernández-Carnero, Josué; Padua, Luca; Arendt-Nielsen, Lars; Pareja, Juan A
2009-10-01
The aim of the current study was to evaluate bilaterally warm/cold detection and heat/cold pain thresholds over the hand/wrist in patients with carpal tunnel syndrome (CTS). A total of 25 women with strictly unilateral CTS (mean 42 +/- 10 years), and 20 healthy matched women (mean 41 +/- 8 years) were recruited. Warm/cold detection and heat/cold pain thresholds were assessed bilaterally over the carpal tunnel and the thenar eminence in a blinded design. Self-reported measures included both clinical pain history (intensity, location and area) and Boston Carpal Tunnel Questionnaire. No significant differences between groups for both warm and cold detection thresholds in either carpal tunnel or thenar eminence (P > 0.5) were found. Further, significant differences between groups, but not between sides, for both heat and cold pain thresholds in both the carpal tunnel and thenar eminence were found (all P < 0.001). Heat pain thresholds (P < 0.01) were negatively correlated, whereas cold pain thresholds (P < 0.001) were positively correlated with hand pain intensity and duration of symptoms. Our findings revealed bilateral thermal hyperalgesia (lower heat pain and reduced cold pain thresholds) but not hypoesthesia (normal warm/cold detection thresholds) in patients with strictly unilateral CTS when compared to controls. We suggest that bilateral heat and cold hyperalgesia may reflect impairments in central nociceptive processing in patients with unilateral CTS. The bilateral thermal hyperalgesia associated with pain intensity and duration of pain history supports a role of generalized sensitization mechanisms in the initiation, maintenance and spread of pain in CTS.
Fernández-Muñoz, Juan J; Palacios-Ceña, María; Cigarán-Méndez, Margarita; Ortega-Santiago, Ricardo; de-la-Llave-Rincón, Ana I; Salom-Moreno, Jaime; Fernández-de-las-Peñas, César
2016-02-01
To investigate potential relationships of clinical (age, function, side of pain, years with pain), physical (cervical range of motion, pinch grip force), psychological (depression), and neurophysiological (pressure and thermal pain thresholds) outcomes and hand pain intensity in carpal tunnel syndrome (CTS). Two hundred and forty-four (n=224) women with CTS were recruited. Demographic data, duration of the symptoms, function and severity of the disease, pain intensity, depression, cervical range of motion, pinch tip grip force, heat/cold pain thresholds (HPT/CPT), and pressure pain thresholds (PPT) were collected. Correlation and regression analysis were performed to determine the association among those variables and to determine the proportions of explained variance in hand pain intensity. Significant negative correlations existed between the intensity of pain and PPTs over the radial nerve, C5/C6 zygapophyseal joint, carpal tunnel and tibialis anterior muscle, HPT over the carpal tunnel, cervical extension and lateral-flexion, and thumb-middle, fourth, and little finger pinch tip forces. Significant positive correlations between the intensity of hand pain with function and depression were also observed. Stepwise regression analyses revealed that function, thumb-middle finger pinch, thumb-little finger pinch, depression, PPT radial nerve, PPT carpal tunnel, and HPT carpal tunnel were significant predictors of intensity of hand pain (R²=0.364; R² adjusted=0.343; F=16.87; P<0.001). This study showed that 36.5% of the variance of pain intensity was associated to clinical (function), neurophysiological (localized PPT and HPT), psychological (depression), and physical (finger pinch tip force) outcomes in women with chronic CTS.
Functional deficits in carpal tunnel syndrome reflect reorganization of primary somatosensory cortex
Kettner, Norman; Holden, Jameson; Lee, Jeungchan; Kim, Jieun; Cina, Stephen; Malatesta, Cristina; Gerber, Jessica; McManus, Claire; Im, Jaehyun; Libby, Alexandra; Mezzacappa, Pia; Morse, Leslie R.; Park, Kyungmo; Audette, Joseph; Tommerdahl, Mark; Napadow, Vitaly
2014-01-01
Carpal tunnel syndrome, a median nerve entrapment neuropathy, is characterized by sensorimotor deficits. Recent reports have shown that this syndrome is also characterized by functional and structural neuroplasticity in the primary somatosensory cortex of the brain. However, the linkage between this neuroplasticity and the functional deficits in carpal tunnel syndrome is unknown. Sixty-three subjects with carpal tunnel syndrome aged 20–60 years and 28 age- and sex-matched healthy control subjects were evaluated with event-related functional magnetic resonance imaging at 3 T while vibrotactile stimulation was delivered to median nerve innervated (second and third) and ulnar nerve innervated (fifth) digits. For each subject, the interdigit cortical separation distance for each digit’s contralateral primary somatosensory cortex representation was assessed. We also evaluated fine motor skill performance using a previously validated psychomotor performance test (maximum voluntary contraction and visuomotor pinch/release testing) and tactile discrimination capacity using a four-finger forced choice response test. These biobehavioural and clinical metrics were evaluated and correlated with the second/third interdigit cortical separation distance. Compared with healthy control subjects, subjects with carpal tunnel syndrome demonstrated reduced second/third interdigit cortical separation distance (P < 0.05) in contralateral primary somatosensory cortex, corroborating our previous preliminary multi-modal neuroimaging findings. For psychomotor performance testing, subjects with carpal tunnel syndrome demonstrated reduced maximum voluntary contraction pinch strength (P < 0.01) and a reduced number of pinch/release cycles per second (P < 0.05). Additionally, for four-finger forced-choice testing, subjects with carpal tunnel syndrome demonstrated greater response time (P < 0.05), and reduced sensory discrimination accuracy (P < 0.001) for median nerve, but not ulnar nerve, innervated digits. Moreover, the second/third interdigit cortical separation distance was negatively correlated with paraesthesia severity (r = −0.31, P < 0.05), and number of pinch/release cycles (r = −0.31, P < 0.05), and positively correlated with the second and third digit sensory discrimination accuracy (r = 0.50, P < 0.05). Therefore, reduced second/third interdigit cortical separation distance in contralateral primary somatosensory cortex was associated with worse symptomatology (particularly paraesthesia), reduced fine motor skill performance, and worse sensory discrimination accuracy for median nerve innervated digits. In conclusion, primary somatosensory cortex neuroplasticity for median nerve innervated digits in carpal tunnel syndrome is indeed maladaptive and underlies the functional deficits seen in these patients. PMID:24740988
Percutaneous Ultrasound-Guided Carpal Tunnel Release: Study Upon Clinical Efficacy and Safety
DOE Office of Scientific and Technical Information (OSTI.GOV)
Petrover, David, E-mail: dpetrover@yahoo.fr; Silvera, Jonathan, E-mail: silvera.jonathan@gmail.com; Baere, Thierry De, E-mail: Debaere@igr.fr
ObjectivesTo evaluate the feasibility and 6 months clinical result of sectioning of the transverse carpal ligament (TCL) and median nerve decompression after ultra-minimally invasive, ultrasound-guided percutaneous carpal tunnel release (PCTR) surgery.MethodsConsecutive patients with carpal tunnel syndrome were enrolled in this descriptive, open-label study. The procedure was performed in the interventional radiology room. Magnetic resonance imaging was performed at baseline and 1 month. The Boston Carpal Tunnel Questionnaire was administered at baseline, 1, and 6 months.Results129 patients were enrolled. Significant decreases in mean symptom severity scores (3.3 ± 0.7 at baseline, 1.7 ± 0.4 at Month 1, 1.3 ± 0.3 at Month 6) and mean functional status scores (2.6 ± 1.1 atmore » baseline, 1.6 ± 0.4 at Month 1, 1.3 ± 0.5 at Month 6) were noted. Magnetic resonance imaging showed a complete section of all TCL and nerve decompression in 100% of patients. No complications were identified.ConclusionsUltrasound-guided PCTR was used successfully to section the TCL, decompress the median nerve, and reduce self-reported symptoms.« less
Kearns, Gary; Wang, Sharon
2012-01-01
This case report describes the effectiveness of thrust manipulation to the elbow and carpals in the management of a patient referred with a medical diagnosis of cubital tunnel syndrome (CuTS). The patient was a 45-year-old woman with a 6-week history of right medial elbow pain, ulnar wrist pain, and intermittent paresthesia in the ulnar nerve distribution. Upon initial assessment, she presented with a positive elbow flexion test and upper limb neurodynamic test with ulnar nerve bias. A biomechanical assessment of the elbow and carpals revealed a loss of lateral glide of the humerus on the ulna and a loss of palmar glide of the triquetral on the hamate. After the patient received two thrust manipulations of the elbow and one thrust manipulation of the carpals over the course of four sessions, her pain and paresthesia were resolved. This case demonstrates that the use of thrust manipulation to the elbow and carpals may be an effective approach in the management of insidious onset CuTS. This patient was successfully treated with thrust manipulation when joint dysfunction of the elbow and wrist were appropriately identified. This case report may shed light on the examination and management of insidious onset CuTS. PMID:23633888
Management of Carpal Tunnel Syndrome.
Mooar, Pekka A; Doherty, William J; Murray, Jayson N; Pezold, Ryan; Sevarino, Kaitlyn S
2018-03-15
The American Academy of Orthopaedic Surgeons (AAOS) has developed Appropriate Use Criteria (AUC) for Management of Carpal Tunnel Syndrome. Evidence-based information, in conjunction with the clinical expertise of physicians, was used to develop the criteria to improve patient care and obtain best outcomes while considering the subtleties and distinctions necessary in making clinical decisions. To provide the evidence foundation for this AUC, the AAOS Evidence-Based Medicine Unit provided the writing panel and voting panel with the 2016 AAOS Clinical Practice Guideline titled Management of Carpal Tunnel Syndrome Evidence-Based Clinical Practice Guideline. The Management of Carpal Tunnel Syndrome AUC clinical patient scenarios were derived from indications typical of patients with suspected carpal tunnel syndrome in clinical practice, as well as from current evidence-based clinical practice guidelines and supporting literature to identify the appropriateness of treatments. The 135 patient scenarios and 6 treatments were developed by the writing panel, a group of clinicians who are specialists in this AUC topic. Next, a separate, multidisciplinary, voting panel (made up of specialists and nonspecialists) rated the appropriateness of treatment of each patient scenario using a 9-point scale to designate a treatment as Appropriate (median rating, 7 to 9), May Be Appropriate (median rating, 4 to 6), or Rarely Appropriate (median rating, 1 to 3).
Crnković, T; Trkulja, V; Bilić, R; Gašpar, D; Kolundžić, R
2016-05-01
Our aim was to study the dynamics of the post-surgical canal and nerve volumes and their relationships to objective [electromyoneurography (EMNG)] and subjective (pain) outcomes. Forty-seven patients with carpal tunnel syndrome (CTS) (median age 52, range 23-75 years) with a prominent narrowing of the median nerve within the canal (observed during carpal tunnel release) were evaluated clinically using EMNG and magnetic resonance imagining (MRI) before and at 90 and 180 days post-surgery. Canal and nerve volumes increased, EMNG findings improved and pain resolved during the follow-up. Increase in tunnel volume was independently associated with increased nerve volume. A greater post-surgical nerve volume was independently associated with a more prominent resolution of pain, but not with the extent of EMNG improvement, whereas EMNG improvement was not associated with pain resolution. Data confirm that MRI can detect even modest changes in the carpal tunnel and median nerve volume and that tunnel release results in tunnel and nerve-volume increases that are paralleled by EMNG and clinical improvements. Taken together, these observations suggest that MRI could be used to objectivise persistent post-surgical difficulties in CTS patients. Level of evidence 3 (follow-up study).
Kim, Poong-Taek; Micić, Ivan D; Park, Il-Hyng; Jeon, In-ho
2007-01-01
During a 4-year period, a total of 784 wrists of 640 patients were treated using a modified Chow's extrabursal dual portal endoscopic technique. All surgeries were performed under local anesthesia. A 1-cm incision was marked 1-2 cm proximal to the distal wrist crease, in the midline, ulnar to the palmaris longus. A distal portal was established along a line bisecting an angle created by the intersection of the ulnar border of the abducted thumb and the third web space. An obturator and cannula assembly were inserted under the portal, and three blades were used to cut under endoscopic vision. Subjective results showed that 706 hands (90%) had a reduction in the severity of pain after carpal tunnel release, 706 hands (90%) had a reduction in the severity of paresthesia and 729 hands (93%) had a reduction in the severity of numbness. Nocturnal pain and paresthesia were relieved in 745 cases (95%). Compared with the conventional open carpal tunnel release, less postoperative pain and faster recovery have been reported following endoscopic carpal tunnel release. This study suggests that extrabursal dual portal technique is a safe and reliable treatment option for carpal tunnel syndrome with a high success rate.
Minimally invasive carpal tunnel decompression using the KnifeLight.
Hwang, Peter Y K; Ho, Chi Long
2007-02-01
Carpal tunnel syndrome is a common condition causing hand pain, dysfunction, and paresthesia. Endoscopic carpal tunnel decompression offers many advantages compared with conventional open surgical decompression. However, it is equipment intensive and requires familiarity with endoscopic surgery. We review a minimally invasive technique to divide the flexor retinaculum by using a new instrument, the KnifeLight (Stryker, Kalamazoo, Michigan), which combines the advantages of the open and endoscopic methods, without the need for endoscopic set-up. Between July 2003 and April 2005, 44 consecutive patients (26 women [59%] and 18 men [36%]), with clinical signs and symptoms, as well as electrodiagnostic findings consistent with carpal tunnel syndrome, who did not respond to non-surgical treatment, underwent the new procedure. All patients were asked about scar hypertrophy, scar tenderness, and pillar pain. The Michigan Hand Outcomes Questionnaire (MHQ) was used to determine overall hand function, activities of daily living, work performance, pain, aesthetics, and satisfaction with hand function. Other preoperative testing included grip strength and lateral pinch strength. Grip strength was measured using the Jamar hand dynamometer (Asimov Engineering Co., Los Angeles, CA); lateral key pinch was measured using the Jamar hydraulic pinch gauge. Postoperative evaluations were scheduled at 2 weeks, 3 months, and 6 months after the procedure. A small 10-mm incision was made in the wrist crease and a small opening was made at the transverse carpal ligament. The KnifeLight tool was inserted, and the ligament was incised completely. Follow-up evaluations with use of quantitative measurements of grip strength, pinch strength, and hand dexterity were performed at 2 weeks, 3 months, and 6 months after surgery. Fifty procedures were performed on 22 left hands (44%) and 28 right hands (56%). There were no complications related to the approach. All patients were able to use their hands immediately after the surgery. Scar tenderness and incisional pain were mild-to-moderate in the first 2 weeks, and these symptoms disappeared completely 6 months after surgery. Significant postoperative improvements in pain relief, patient satisfaction, hand function, daily activities, and work performance as assessed with the MHQ were noted at 3 and 6 months after surgery. Furthermore, significant improvement in patients' hand grip and pinch strength were observed 6 months after surgery. From a literature review, we found that the mean operation time of KnifeLight carpal tunnel release was the shortest compared with the conventional and endoscopic carpal tunnel release techniques. The median time needed for our patients to return to work was also the shortest among the different techniques. Excellent functional outcomes and satisfaction were achieved using the KnifeLight for carpal tunnel decompression. Our minimally invasive method offers a quick, easy, and effective alternative to conventional or endoscopic carpal tunnel decompression.
VizieR Online Data Catalog: Arches cluster: IR phot., extinction and masses (Habibi+, 2013)
NASA Astrophysics Data System (ADS)
Habibi, M.; Stolte, A.; Brandner, W.; Hussmann, B.; Motohara, K.
2013-05-01
We observed the Arches cluster out to its tidal radius using Ks-band and H-band imaging obtained on June 6-10 2008 with NAOS/CONICA at the VLT combined with Subaro/Cisco J-band data to gain a full understanding of the cluster mass distribution. The acquired Ks-band images cover four fields of 27.8*27.8(arcsec) each, provided by the medium resolution camera (S27) with a pixel scale of 0.027(arcsec). During the Ks-band observations, the natural visual seeing varied from 0.61" to 0.98". We achieved typical spatial resolutions of 0.081-0.135(arcsec) on individual frames using this AO setup. Seeing-limited J-band observations, on July 17, 2000, were performed with the CISCO spectrograph and camera which provided a pixel scale of 0.116(arcsec) and a field of view of 2*2(arcmin). An average seeing of 0.49(arcsec) resulted into a Full Width at Half Maximum (FWHM) of the point-spread function (PSF) of 0.39(arcsec) on the combined image. The catalogue includes derived infrared-photometry in J, H and Ks bands as well as derived individual extinction value and stellar masses. We used the NAOS-CONICA observations obtained in March 2002 in the central part of the Arches cluster to cover the whole cluster area. (1 data file).
Nitzan, Dorrit W; Palla, Sandro
2017-06-01
The aim of this case series was to describe a modification of the classic "closed reduction" technique to manage unilateral or anterior open bite owing to a loss in vertical height (LVH) caused by several disorders and pathologies other than displaced condylar fractures. The protocol included insertion of an occlusal appliance to increase the height of the premature contact and the width of the open bite, stabilization of the dental arches by rigid arches, and the use, during sleep, of rubber bands in the open bite region to pull the mandible cranially. In addition, when awake, the patient performed physiotherapy exercises to guide the mandible into maximum intercuspation. The increased open bite enhanced the effect of the rubber bands in guiding the mandible into the original habitual occlusion and the rigid arches served to minimize tooth eruption. The present cases showed the favorable outcome of this low-risk treatment in the re-establishment of the original habitual occlusion within 1 to 4 weeks and without reconstruction of the LVH. The efficacy of this complication-free approach to correct occlusion in various conditions of LVH suggests that this protocol should be applied before venturing into surgical intervention. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
González Manrique, S. J.; Bello González, N.; Denker, C.
2017-04-01
Context. Emerging flux regions mark the first stage in the accumulation of magnetic flux eventually leading to pores, sunspots, and (complex) active regions. These flux regions are highly dynamic, show a variety of fine structure, and in many cases live only for a short time (less than a day) before dissolving quickly into the ubiquitous quiet-Sun magnetic field. Aims: The purpose of this investigation is to characterize the temporal evolution of a minute emerging flux region, the associated photospheric and chromospheric flow fields, and the properties of the accompanying arch filament system. We aim to explore flux emergence and decay processes and investigate if they scale with structure size and magnetic flux contents. Methods: This study is based on imaging spectroscopy with the Göttingen Fabry-Pérot Interferometer at the Vacuum Tower Telescope, Observatorio del Teide, Tenerife, Spain on 2008 August 7. Photospheric horizontal proper motions were measured with Local correlation tracking using broadband images restored with multi-object multi-frame blind deconvolution. Cloud model (CM) inversions of line scans in the strong chromospheric absorption Hαλ656.28 nm line yielded CM parameters (Doppler velocity, Doppler width, optical thickness, and source function), which describe the cool plasma contained in the arch filament system. Results: The high-resolution observations cover the decay and convergence of two micro-pores with diameters of less than one arcsecond and provide decay rates for intensity and area. The photospheric horizontal flow speed is suppressed near the two micro-pores indicating that the magnetic field is already sufficiently strong to affect the convective energy transport. The micro-pores are accompanied by a small arch filament system as seen in Hα, where small-scale loops connect two regions with Hα line-core brightenings containing an emerging flux region with opposite polarities. The Doppler width, optical thickness, and source function reach the largest values near the Hα line-core brightenings. The chromospheric velocity of the cloud material is predominantly directed downwards near the footpoints of the loops with velocities of up to 12 km s-1, whereas loop tops show upward motions of about 3 km s-1. Some of the loops exhibit signs of twisting motions along the loop axis. Conclusions: Micro-pores are the smallest magnetic field concentrations leaving a photometric signature in the photosphere. In the observed case, they are accompanied by a miniature arch filament system indicative of newly emerging flux in the form of Ω-loops. Flux emergence and decay take place on a time-scale of about two days, whereas the photometric decay of the micro-pores is much more rapid (a few hours), which is consistent with the incipient submergence of Ω-loops. Considering lifetime and evolution timescales, impact on the surrounding photospheric proper motions, and flow speed of the chromospheric plasma at the loop tops and footpoints, the results are representative for the smallest emerging flux regions still recognizable as such.
The impact of kiddy dentures on maxillary arch growth.
Shih, Wen-Yu; Wu, Fu-Ya
2016-09-01
Kiddy dentures are used to restore the self-confidence, chewing function, and pronunciation of children or when a care provider is concerned about the loss of incisor teeth. However, most studies to date have investigated normal dental arch development, and only a few have explored the effect of kiddy dentures on upper arch development. Fourteen Taiwanese children (7 male and 7 female) who were wearing kiddy dentures due to the loss of their upper anterior teeth were enrolled in this study. Inclusion criteria were the premature loss of maxillary incisors, the patient wearing kiddy dentures with both upper primary first molars as abutments, and the patient having complete records allowing a full longitudinal clinical follow-up. Dental casts were obtained immediately (T1), at 6 months (T2), and at 12 months (T3) after delivery of the kiddy dentures. The measured parameters included intercanine width (ICW, C1 to C2), interfirst molar width (IDW, D1 to D2), and intersecond molar width (IEW, E1 to E2). All the measurements were performed by one experienced examiner using a vernier caliper. The mean ages of the enrolled children for the periods T1, T2, and T3 were 43.8 ± 8.3 months, 50.6 ± 8.5 months, and 56.7 ± 8.4 months, respectively. There was no significant difference in gender when ICW, IDW, and IEW were compared. The mean changes in ICW values were 23.6 ± 6.2 mm, 24.2 ± 5.9 mm, and 24.6 ± 6.4 mm for T1, T2, and T3, respectively. There were statistically significant differences between T1 and T2, T2 and T3, and T1 and T3 for ICW (p < 0.05). The mean changes in IDW were 25.7 ± 8.4 mm, 25.8 ± 9.0 mm, and 25.8 ± 9.1 mm for T1, T2, and T3, respectively. There was no statistically significant difference between T1 and T2, T2 and T3, and T1 and T3. The mean changes in IEW were 30.6 ± 10.1 mm, 31.2 ± 8.8 mm, and 31.3 ± 8.2 mm for T1, T2, and T3, respectively. There was statistical significance between T1 and T2 or T1 and T3 for IDW (p < 0.05). Kiddy dentures do interfere with the transverse growth of the dental arch over the abutment tooth area during a 1-year follow-up period. However the teeth adjacent to the confined abutments still show transverse growth. Copyright © 2016. Published by Elsevier Taiwan LLC.
... Updated by: C. Benjamin Ma, MD, Professor, Chief, Sports Medicine and Shoulder Service, UCSF Department of Orthopaedic Surgery, San Francisco, CA. Also reviewed by David Zieve, MD, MHA, Isla Ogilvie, PhD, and the A.D.A.M. Editorial team. Amyloidosis Read more Biopsy Read more Carpal Tunnel ...
New Neandertal wrist bones from El Sidrón, Spain (1994-2009).
Kivell, Tracy L; Rosas, Antonio; Estalrrich, Almudena; Huguet, Rosa; García-Tabernero, Antonio; Ríos, Luis; de la Rasilla, Marco
2018-01-01
Twenty-nine carpal bones of Homo neanderthalensis have been recovered from the site of El Sidrón (Asturias, Spain) during excavations between 1994 and 2009, alongside ∼2500 other Neandertal skeletal elements dated to ∼49,000 years ago. All bones of the wrist are represented, including adult scaphoids (n = 6), lunates (n = 2), triquetra (n = 4), pisiforms (n = 2), trapezia (n = 2), trapezoids (n = 5), capitates (n = 5), and hamates (n = 2), as well as one fragmentary and possibly juvenile scaphoid. Several of these carpals appear to belong to the complete right wrist of a single individual. Here we provide qualitative and quantitative morphological descriptions of these carpals, within a comparative context of other European and Near Eastern Neandertals, early and recent Homo sapiens, and other fossil hominins, including Homo antecessor, Homo naledi, and australopiths. Overall, the El Sidrón carpals show characteristics that typically distinguish Neandertals from H. sapiens, such as a relatively flat first metacarpal facet on the trapezium and a more laterally oriented second metacarpal facet on the capitate. However, there are some distinctive features of the El Sidrón carpals compared with most other Neandertals. For example, the tubercle of the trapezium is small with limited projection, while the scaphoid tubercle and hamate hamulus are among the largest seen in other Neandertals. Furthermore, three of the six adult scaphoids show a distinctive os-centrale portion, while another is a bipartite scaphoid with a truncated tubercle. The high frequency of rare carpal morphologies supports other evidence of a close genetic relationship among the Neandertals found at El Sidrón. Copyright © 2017 Elsevier Ltd. All rights reserved.
Motomiya, Makoto; Funakoshi, Tadanao; Ishizaka, Kinya; Nishida, Mutsumi; Matsui, Yuichiro; Iwasaki, Norimasa
2017-11-24
Although qualitative alteration of the subsynovial connective tissue in the carpal tunnel is considered to be one of the most important factors in the pathophysiologic mechanisms of carpal tunnel syndrome (CTS), little information is available about the microcirculation in the subsynovial connective tissue in patients with CTS. The aims of this study were to use contrast-enhanced ultrasonography (US) to evaluate blood flow in the subsynovial connective tissue proximal to the carpal tunnel in patients with CTS before and after carpal tunnel release. The study included 15 volunteers and 12 patients with CTS. The blood flow in the subsynovial connective tissue and the median nerve was evaluated preoperatively and at 1, 2, and 3 months postoperatively using contrast-enhanced US. The blood flow in the subsynovial connective tissue was higher in the patients with CTS than in the volunteers. In the patients with CTS, there was a significant correlation between the blood flow in the subsynovial connective tissue and the median nerve (P = .01). The blood flow in both the subsynovial connective tissue and the median nerve increased markedly after carpal tunnel release. Our results suggest that increased blood flow in the subsynovial connective tissue may play a role in the alteration of the microcirculation within the median nerve related to the pathophysiologic mechanisms of CTS. The increase in the blood flow in the subsynovial connective tissue during the early postoperative period may contribute to the changes in intraneural circulation, and these changes may lead to neural recovery. © 2017 by the American Institute of Ultrasound in Medicine.
Degeorge, B; Coulomb, R; Kouyoumdjian, P; Mares, O
2018-06-01
The purpose of this study was to determine the time needed to return to personal and professional activities after bilateral simultaneous endoscopic carpal tunnel release. During a retrospective, single-center study, we included a cohort of 30 patients (60 wrists). Patients were evaluated clinically (pain, paresthesia) and functionally (QuickDASH score) pre- and postoperatively. At the last follow-up, patients completed a questionnaire regarding the time needed to resume personal activities using the ADL scale (feeding, personal hygiene and dressing) and return to work. We also evaluated procedure satisfaction and willingness to undergo the surgery again. The average patient age was 60.5 years (range 39-86). At the last follow-up, average time to resume personal activities was 2.2 days (0-14) for feeding, 4.4 days (0-15) for personal hygiene and 3.9 days (0-14) for dressing. Average time to return to recreational activities was 11.7 days (1-60). Average time to return to work was 36.6 days (15-60). Overall, 97% of patients were satisfied or very satisfied with the outcome. All patients would have the bilateral simultaneous surgery again. Bilateral simultaneous endoscopic carpal tunnel release is rarely performed. For mild conditions, contralateral symptom improvement is common after unilateral surgery. Bilateral simultaneous endoscopic carpal tunnel release appears to be disabling right after surgery, but clinical and functional scores are similar after the third postoperative day. These data can be used for patient education and decision making when considering surgery bilateral carpal tunnel syndrome. Bilateral simultaneous endoscopic carpal tunnel release is a feasible and safe procedure. Level IV, case series. Copyright © 2018 SFCM. Published by Elsevier Masson SAS. All rights reserved.
Thirty-two-year follow-up study of Herbst therapy: a biometric dental cast analysis.
Pancherz, Hans; Bjerklin, Krister; Lindskog-Stokland, Birgitta; Hansen, Ken
2014-01-01
The aim of this study was to analyze the very long-term effects of Herbst treatment on tooth position and occlusion. Fourteen patients from a sample of 22 with Class II Division 1 malocclusions consecutively treated with the banded Herbst appliance were reexamined 32 years after therapy. Dental casts were analyzed from before (T1) and after (T2) treatment, and at 6 years (T3) and 32 years (T4) after treatment. Minor changes in maxillary and mandibular dental arch perimeters and arch widths were seen during treatment (T1-T2) and posttreatment (T2-T4). Mandibular incisor irregularity remained, on average, unchanged from T1 to T2 but increased continuously during the 32-year follow-up period (T2-T4). Class II molar and canine relationships were normalized in most patients from T1 to T2. During the early posttreatment period (T2-T3), there was a minor relapse; during the late posttreatment period (T3-T4), molar and canine relationships remained, on average, unchanged. Overjet and overbite were reduced to normal values in all subjects during treatment (T1-T2). After treatment (T2-T4), overjet remained, on average, unchanged, but overbite increased insignificantly. Thirty-two years after Herbst therapy, overall, acceptable long-term results were seen. Stability was found in 64% of the patients for sagittal molar relationships, in 14% for sagittal canine relationships, in 86% for overjet, and in 86% for overbite. A Class II relapse seemed to be caused by an unstable interdigitation of the occluding teeth, a persisting oral habit, or an insufficient retention regimen after treatment. Most posttreatment changes occurred during the first 6 years after treatment. After the age of 20 years, only minor changes were noted. Long-term posttreatment changes in maxillary and mandibular dental arch perimeters and widths as well as in mandibular incisor irregularity seemed to be independent of treatment and a result of physiologic dentoskeletal changes throughout adulthood. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Orthodontically induced eruption of a horizontally impacted maxillary central incisor.
Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Allgayer, Susiane; Batista, Eraldo Luiz; Freitas, Maria Perpétua Mota; Loro, Raphael Carlos Drumond
2013-07-01
This case report presents the clinical features and periodontal findings in a patient with a horizontally impacted maxillary central incisor that had been exposed and aligned after a closed-eruption surgical technique. By combining 3 treatment stages-maxillary expansion, crown exposure surgery, and induced eruption-the horizontally impacted incisor was successfully moved into proper position. The patient finished treatment with a normal and stable occlusion between the maxillary and mandibular arches, and an adequate width of attached gingiva, even in the area surrounding the crown. The 5-year follow-up of stability and periodontal health demonstrated esthetic and functional outcomes after orthodontically induced tooth eruption. Clinical evaluation showed that the treated central incisor had periodontal clinical variables related to visible plaque, bleeding on probing, width of attached gingiva, and crown length that resembled the contralateral incisor. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
A persisting median artery in a patient with symbrachydactyly and carpal tunnel syndrome.
Tollan, C J; Sivarajan, V
2008-07-01
A persisting median artery associated with carpal tunnel syndrome in a patient with symbrachydactyly has not been previously described in the literature. It is unclear whether there may be a developmental association between persistence of a median artery and Symbrachydactyly.
Nadar, Mohammed Shaban; Dashti, Mohsen H.; Cherian, Jigimon
2013-01-01
Purpose The purpose of this study was to compare the properties of the median nerve and the flexor retinaculum within the carpal tunnel with Magnetic Resonance Imaging (MRI) under two conditions: (a) fingers extended, and (b) fingers in an isometric squeeze grip. Methods Thirty-Four volunteers participated in this experimental study. The flexor retinaculum and median nerve characteristics were measured during both conditions using MRI. Results The isometric squeeze grip condition resulted in significant palmar bowing of the flexor retinaculum (t = 7.67, p<.001), a significant flattening-ratio of the median nerve (t = 4.308, p<.001), and no significant decrease in the cross-sectional area of the median nerve (t = 2.508, p = 0.017). Conclusion The isometric squeeze grip condition resulted in anatomical deformations within the carpal tunnel, possibly explained by the lumbrical muscles incursion into the carpal tunnel during finger flexion. PMID:24265763
Hashempur, Mohammad Hashem; Lari, Zeinab Nasiri; Ghoreishi, Parissa Sadat; Daneshfard, Babak; Ghasemi, Mohammad Sadegh; Homayouni, Kaynoosh; Zargaran, Arman
2015-11-01
To assess the effectiveness of standardized topical Chamomile (Matricaria chamomilla L.) oil in patients with severe carpal tunnel syndrome, as a complementary treatment. A pilot randomized double-blind placebo-controlled trial was conducted. Twenty six patients with documented severe carpal tunnel syndrome were treated in two parallel groups with a night splint plus topical chamomile oil or placebo. They were instructed to use their prescribed oil for 4 weeks, twice daily. Symptomatic and functional status of the patients and their electrodiagnostic parameters were evaluated when enrolled and after the trial period, as our outcome measures. A significant improvement of symptomatic and functional status of patients in the chamomile oil group was observed (p = 0.019 and 0.016, respectively) compared with those in the placebo group. However, electrodiagnostic parameters showed no significant changes between the two groups. Chamomile oil improved symptomatic and functional status of patients with severe carpal tunnel syndrome. Copyright © 2015 Elsevier Ltd. All rights reserved.
Viera Alemán, C; Purón, E; Hamilton, M L; Santos Anzorandia, C; Navarro, A; Pineda Ortiz, I
The treatment selection in the carpal tunnel syndrome according to the damage of the median nerve is important and all of these have adverse effects. A good alternative without undesired reactions is irradiation of the carpal tunnel with not coherent light between 920 and 940 nm emitted by gallium arsenide diodes, resembling the physic and therapeutic laser effects. Twenty-six female patients with idiopathic middle carpal tunnel syndrome were irradiated 15 minutes daily during three weeks. The median nerve motor and sensitive neuroconduction was studied before and immediately after the treatment. The abnormal neuroconduction variables (latency, amplitude and velocity conduction) did not modify when treatment concluded, in spite of all the patients reported disappearance of pain and numbness in damaged hands. Not coherent light does not change the fibers functional state explored by conventional neuroconductions techniques. It remains to know if this light produces fine fibers improvement.
Is carpal tunnel syndrome an occupational disease? A review.
Zyluk, Andrzej
2013-05-27
In many countries, including Poland, carpal tunnel syndrome is considered to be a disease of possible occupational etiology. This review presents information about work-related risk-factors which comprise the use of handheld vibrating machinery, forceful gripping of objects with hands, repetitive and frequent manual tasks and forced postures of the wrist (flexion/extension). However, the character of the job is only one of possible several factors leading to the development of the disease, as its etiology is multifactorial. Conditions to be taken into consideration when recognizing a case as occupational carpal tunnel syndrome were shown to include: coexistence of predisposing diseases (diabetes), constitutional factors (obesity), character, level and duration of the exposure to harmful stimuli during the workday as well as total duration of work upon exposure. Consideration of these circumstances provides adequate ground for recognizing a particular case as occupational. Nonetheless, even accepting the disease as occupational should be temporary, as surgical carpal tunnel release is an effective method of treatment and should allow the patient to return to previously performed work.
Repetitive trauma and nerve compression.
Carragee, E J; Hentz, V R
1988-01-01
Repetitive movement of the upper extremity, whether recreational or occupational, may result in various neuropathies, the prototype of which is the median nerve neuropathic in the carpal canal. The pathophysiology of this process is incompletely understood but likely involves both mechanical and ischemic features. Experimentally increased pressures within the carpal canal produced reproducible progressive neuropathy. Changes in vibratory (threshold-type) sensibility appears to be more sensitive than two-point (innervation density-type) sensibility. The specific occupational etiologies of carpal neuropathy are obscured by methodologic and sociological difficulties, but clearly some occupations have high incidences of CTS. History and physical examination are usually sufficient for the diagnosis, but diagnostic assistance when required is available through electrophysiological testing, CT scanning, and possibly MRI. Each of these tests has limitations in both sensitivity and specificity. Treatment by usual conservative means should be combined with rest from possible provocative activities. Surgical release of the carpal canal is helpful in patients failing conservative therapy. Occupational modifications are important in both treatment and prevention of median neuropathy due to repetitive trauma.
Stasinopoulos, D; Stasinopoulos, I; Johnson, M I
2005-04-01
Our aim was to assess the efficacy of polarized polychromatic noncoherent light (Bioptron light) in the treatment of idiopathic carpal tunnel syndrome. Carpal tunnel syndrome is the most common compression neuropathy, but no satisfactory conservative treatment is available at present. An uncontrolled experimental study was conducted in patients who visited our clinic from mid-2001 to mid-2002. A total of 25 patients (22 women and three men) with unilateral idiopathic carpal tunnel syndrome, mild to moderate nocturnal pain, and paraesthesia lasting >3 months participated in the study. The average age of the patients was 47.4 years and the average duration of patients' symptoms was 5.2 months. Polarized polychromatic noncoherent light (Bioptron light) was administered perpendicular to the carpal tunnel area. The irradiation time for each session was 6 min at an operating distance of 5-10 cm from the carpal tunnel area, three times weekly for 4 weeks. Outcome measures used were the participants' global assessments of nocturnal pain and paraesthesia, respectively, at 4 weeks and 6 months. At 4 weeks, two patients (8%) had no change in nocturnal pain, six (24%) were in slightly less nocturnal pain, 12 (48%) were much better in regard to nocturnal pain and five (20%) were pain-free. At 6 months, three patients (12%) were slightly better in regard to nocturnal pain, 13 (52%) were much better regarding nocturnal pain, and nine patients (36%) were pain-free. At 4 weeks, four patients (16%) had no change in paraesthesia, five (20%) were slightly better, 13 patients (52%) were much better, and three patients (12%) were without paraesthesia. At 6 months, two patients (8%) had no change in paraesthesia, two (8%) were slightly better, 14 (56%) were much better, and seven (28%) were without paraesthesia. Nocturnal pain and paraesthesia associated with idiopathic carpal tunnel syndrome improved during polarized polychromatic noncoherent light (Bioptron light) treatment. Controlled clinical trials are needed to establish the absolute and relative effectiveness of this intervention.
Carpal Tunnel Syndrome in Aberrant Muscle Syndrome: A Case Report and Review of the Literature.
Steele, Jessica; Coombs, Christopher
2018-06-01
Aberrant Muscle Syndrome (AMS) is a rare congenital hand difference that is characterised by unilateral non-progressive muscular hyperplasia. The aetiology of aberrant muscle syndrome is not known, but a recently published case has shown a somatic PIK3CA activating mutation in a patient with AMS. Carpal tunnel syndrome (CTS) in children is rare. The most common causes are the mucopolysaccaridoses but space-occupying lesions have also been reported to cause CTS in children. We report the first case of CTS in a child with AMS successfully treated with open carpal tunnel release and excision of aberrant muscles.
White, Aaron J; Fallis, Drew W; Vandewalle, Kraig S
2010-04-01
Study models are an essential part of an orthodontic record. Digital models are now available. One option for generating a digital model is cone-beam computed tomography (CBCT) scanning of orthodontic impressions and bite registrations. However, the accuracy of digital measurements from models generated by this method has yet to be thoroughly evaluated. A plastic typodont was modified with reference points for standardized intra-arch and interarch measurements, and 16 sets of maxillary and mandibular vinylpolysiloxane and alginate impressions were made. A copper wax-bite registration was made with the typodont in maximum intercuspal position to accompany each set of impressions. The impressions were shipped to OrthoProofUSA (Albuquerque, NM), where digital orthodontic models were generated via CBCT. Intra-arch and interarch measurements were made directly on the typodont with electronic digital calipers and on the digital models by using OrthoProofUSA's proprietary DigiModel software. Percentage differences from the typodont of all intra-arch measurements in the alginate and vinylpolysiloxane groups were low, from 0.1% to 0.7%. Statistical analysis of the intra-arch percentage differences from the typodont of the alginate and vinylpolysiloxane groups had a statistically significant difference between the groups only for maxillary intermolar width. However, because of the small percentage differences, this was not considered clinically significant for orthodontic measurements. Percentage differences from the typodont of all interarch measurements in the alginate and vinylpolysiloxane groups were much higher, from 3.3% to 10.7%. Statistical analysis of the interarch percentage differences from the typodont of the alginate and vinylpolysiloxane groups showed statistically significant differences between the groups in both the maxillary right canine to mandibular right canine (alginate with a lower percentage difference than vinylpolysiloxane) and the maxillary left second molar to mandibular left second molar (alginate with a greater percentage difference than vinylpolysiloxane) segments. This difference, ranging from 0.24 to 0.72 mm, is clinically significant. In this study, digital orthodontic models from CBCT scans of alginate and vinylpolysiloxane impressions provided a dimensionally accurate representation of intra-arch relationships for orthodontic evaluation. However, the use of copper wax-bite registrations in this CBCT-based process did not result in an accurate digital representation of interarch relationships. Copyright (c) 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Dentoskeletal features in individuals with ectopic eruption of the permanent maxillary first molar
Rozzi, Matteo; Cardoni, Giulia; Ricchiuti, Maria Rosaria; Cozza, Paola
2015-01-01
Objective The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t-tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions EEM may be a risk factor for maxillary arch constriction and severe tooth crowding. PMID:26258065
2011-01-01
Background A clinical study was conducted to determine the intra and inter-rater reliability of digital scanning and the neutral suspension casting technique to measure six foot parameters. The neutral suspension casting technique is a commonly utilised method for obtaining a negative impression of the foot prior to orthotic fabrication. Digital scanning offers an alternative to the traditional plaster of Paris techniques. Methods Twenty one healthy participants volunteered to take part in the study. Six casts and six digital scans were obtained from each participant by two raters of differing clinical experience. The foot parameters chosen for investigation were cast length (mm), forefoot width (mm), rearfoot width (mm), medial arch height (mm), lateral arch height (mm) and forefoot to rearfoot alignment (degrees). Intraclass correlation coefficients (ICC) with 95% confidence intervals (CI) were calculated to determine the intra and inter-rater reliability. Measurement error was assessed through the calculation of the standard error of the measurement (SEM) and smallest real difference (SRD). Results ICC values for all foot parameters using digital scanning ranged between 0.81-0.99 for both intra and inter-rater reliability. For neutral suspension casting technique inter-rater reliability values ranged from 0.57-0.99 and intra-rater reliability values ranging from 0.36-0.99 for rater 1 and 0.49-0.99 for rater 2. Conclusions The findings of this study indicate that digital scanning is a reliable technique, irrespective of clinical experience, with reduced measurement variability in all foot parameters investigated when compared to neutral suspension casting. PMID:21375757
Paolucci, Teresa; Piccinini, Giulia; Nusca, Sveva Maria; Marsilli, Gabriella; Mannocci, Alice; La Torre, Giuseppe; Saraceni, Vincenzo Maria; Vulpiani, Maria Chiara; Villani, Ciro
2018-01-01
[Purpose] The aim of this study was to investigate the clinical effects of a nutraceutical composed (Xinepa®) combined with extremely-low-frequency electromagnetic fields in the carpal tunnel syndrome. [Subjects and Methods] Thirty-one patients with carpal tunnel syndrome were randomized into group 1-A (N=16) (nutraceutical + extremely-low-frequency electromagnetic fields) and group 2-C (n=15) (placebo + extremely-low-frequency electromagnetic fields). The dietary supplement with nutraceutical was twice daily for one month in the 1-A group and both groups received extremely-low-frequency electromagnetic fields at the level of the carpal tunnel 3 times per week for 12 sessions. The Visual Analogue Scale for pain, the Symptoms Severity Scale and Functional Severity Scale of the Boston Carpal Tunnel Questionnaire were used at pre-treatment (T0), after the end of treatment (T1) and at 3 months post-treatment (T2). [Results] At T1 and T2 were not significant differences in outcome measures between the two groups. In group 1-A a significant improvement in the scales were observed at T1 and T2. In group 2-C it was observed only at T1. [Conclusion] Significant clinical effects from pre-treatment to the end of treatment were shown in both groups. Only in group 1-A they were maintained at 3 months post-treatment.
NASA Astrophysics Data System (ADS)
Alcala, Yvonne; Olivecrona, Henrik; Olivecrona, Lotta; Noz, Marilyn E.; Maguire, Gerald Q., Jr.; Zeleznik, Michael P.; Sollerman, Christer
2005-04-01
The purpose of this study was to extend previous work to detect migration of total wrist arthroplasty non-invasively, and with greater accuracy. Two human cadaverous arms, each with a cemented total wrist implant, were used in this study. In one of the arms, 1 mm tantalum balls were implanted, six in the carpal bones and five in the radius. Five CT scans of each arm were acquired, changing the position of the arm each time to mimic different positions patients might take on repeated examinations. Registration of CT volume data sets was performed using an extensively validated, 3D semi-automatic volume fusion tool in which co-homologous point pairs (landmarks) are chosen on each volume to be registered. Three sets of ten cases each were obtained by placing landmarks on 1) bone only (using only arm one), 2) tantalum implants only, and 3) bone and tantalum implants (both using only arm two). The accuracy of the match was assessed visually in 2D and 3D, and numerically by calculating the distance difference between the actual position of the transformed landmarks and their ideal position (i.e., the reference landmark positions). All cases were matched visually within one width of cortical bone and numerically within one half CT voxel (0.32 mm, p = 0.05). This method matched only the bone/arm and not the prosthetic component per se, thus making it possible to detect prosthetic movement and wear. This method was clinically used for one patient with pain. Loosening of the carpal prosthetic component was accurately detected and this was confirmed at surgery.
Coexisting cervical spondylotic myelopathy and bilateral carpal tunnel syndromes.
Epstein, N E; Epstein, J A; Carras, R
1989-03-01
In six patients, operations for bilateral carpal tunnel syndromes (CTS) were performed or were about to be performed without the awareness of the presence of underlying cervical spondylo-stenosis. Only later, when symptoms of myeloradiculopathy were recognized, was the diagnosis confirmed and decompressive laminectomy performed. Because the symptoms of CTS may resemble or be masked and accentuated by the cervical disorder, patients with the presumed diagnosis of bilateral CTS should undergo appropriate critical neurologic, electrodiagnostic, and neuroradiologic (magnetic resonance imaging, computed tomography, myelo-computed tomography) assessment. If these guidelines are followed, the radiculopathy caused by cervical pathology will be appropriately recognized and treated, possibly averting the need for carpal tunnel decompression or modifying treatment.
Disabling hand injuries in boxing: boxer's knuckle and traumatic carpal boss.
Melone, Charles P; Polatsch, Daniel B; Beldner, Steven
2009-10-01
This article describes the treatment of the two most debilitating hand-related boxing injuries: boxer's knuckle and traumatic carpal boss. Recognition of the normal anatomy as well as the predictable pathology facilitates an accurate diagnosis and precision surgery. For boxer's knuckle, direct repair of the disrupted extensor hood, without the need for tendon augmentation, has been consistently employed; for traumatic carpal boss, arthrodesis of the destabilized carpometacarpal joints has been the preferred method of treatment. Precisely executed operative treatment of both injuries has resulted in a favorable outcome, as in the vast majority of cases the boxers have experienced relief of pain, restoration of function, and an unrestricted return to competition.
[A case of the Hallermann-Streiff syndrome].
Higashi, M; Hara, M; Michimata, H; Nishimura, K; Kurihara, Y
1990-01-01
The Hallermann-Streiff Syndrome has been characterized and established according to 7 positive and 5 negative signs, which were described by François. We encountered an 11 year, 5 months old boy who had 7 positive symptoms of this syndrome in our clinic. In this study, we reported on this typical patient focusing on his dental view. 1) Prolonged retention of the primary teeth which involved microdontia were noted. Congenitally missing teeth were also seen. 2) The occlusal relationship indicated open bite, and also the mandibular function was impaired. 3) The measurements of the length and width of the dental arch were smaller than that of a normal subject, and the dental arch of the maxilla was V-shaped. 4) According to X-ray cephalometric analysis, (a) the dental calculus and the alveolar bone absorption were very evident. (b) abnormal morphologic of the glenoid fossa, mandibulars condyle and the neck of mandibula were seen. These conditions were very evident on the left side. 5) The growth obstade of the maxilla and mandibla and the left shift of the mandible were found. 6) According to histological study, enamel hypoplasia was noted.
Rojas-Vizcaya, Fernando
2017-11-01
A digital smile design was used to create an average smile and to develop a removable interim restoration for an edentulous patient with a high smile line and different bone levels in the maxilla. The interim restoration was used as a guide to perform bone sculpturing to create space for the biological width and to restore a monolithic zirconia implant-supported fixed restoration. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
Employees' Knowledge of Carpal Tunnel Syndrome.
ERIC Educational Resources Information Center
Gandy-Goldston, Terrie M.
A study examined employees' knowledge of the causes of carpal tunnel syndrome (CTS), its prevention, and their legal rights after being diagnosed with CTS. A 24-item questionnaire was administered to a random sample of 30 Chicago-area employees who had been afflicted with CTS. Of those surveyed, 99% considered their CTS injury related to their…
Evers, Stefanie; Thoreson, Andrew R; Smith, Jay; Zhao, Chunfeng; Geske, Jennifer R; Amadio, Peter C
2018-01-01
The aim of this study was to assess alterations in median nerve (MN) biomechanics within the carpal tunnel resulting from ultrasound-guided hydrodissection in a cadaveric model. Twelve fresh frozen human cadaver hands were used. MN gliding resistance was measured at baseline and posthydrodissection, by pulling the nerve proximally and then returning it to the origin. Six specimens were treated with hydrodissection, and 6 were used as controls. In the hydrodissection group there was a significant reduction in mean peak gliding resistance of 92.9 ± 34.8 mN between baseline and immediately posthydrodissection (21.4% ± 10.5%; P = 0.001). No significant reduction between baseline and the second cycle occurred in the control group: 9.6 ± 29.8 mN (0.4% ± 5.3%; P = 0.467). Hydrodissection can decrease the gliding resistance of the MN within the carpal tunnel, at least in wrists unaffected by carpal tunnel syndrome. A clinical trial of hydrodissection seems justified. Muscle Nerve 57: 25-32, 2018. © 2017 Wiley Periodicals, Inc.
An alternative hypothesis for sink development above salt cavities in the Detroit area
Stump, Daniel; Nieto, A.S.; Ege, J.R.
1982-01-01
Subsidence and sink formation resulting from brining operations in the Windsor-Detroit area include the 1954 sink at the Canadian Salt Company brine field near Windsor, Ontario, and the 1971 sinks at the BASF Wyandotte Corporation brine field at Grosse Ile, Mich. Earlier investigations into both occurrences concluded that the mechanism of sink development consisted of the gradual stoping of poorly supported brine-gallery roof rock to the near surface with subsequent surface collapse. A more recent study attempted to describe the mechanism of sink development in terms of the geometry of a cylindrical chimney formed by stoping of roof rock, the height of a cavity at depth, the depth of overlying rock, and the bulking ratio of the rubble formed during stoping. Persons with extensive experience in solution mining in the Windsor-Detroit area have expressed doubt that the stoping mechanism could fully explain the development of these sinks. Further, they have proposed that the relatively shallow (300-ft-deep) Sylvania Sandstone, in this case, may be responsible for the sinks by a secondary undermining mechanism to be examined in this paper. The mechanism involves downwarping of the beds overlying the salt cavity and development of a shallower cavity in the Sylvania Sandstone by downward migration of cohesionless sand grains from the Sylvania through openings in the disturbed rock to the lower cavity. This study indicates that under natural conditions the Sylvania will not migrate, even in the presence of large underground water flows because the sandstone possesses some cohesion throughout its depth. However, further investigation has formulated a mechanism that could allow the Sylvania Sandstone to loose its cohesion in response to high horizontal stresses. These stresses could be the result of deformation that accompanies general subsidence and (or) of past geologic processes. Included in this study were experimental and analytical investigations. As determined by uniaxial and triaxial testing, the Sylvania Sandstone in the Detroit area has been shown to have low compressive strength. In addition, it exhibits an explosive type failure whereby over 50 percent of the sample is reduced to loose granular sand. As a result of these characteristics, the Sylvania Sandstone can loose its cohesion when subjected to high horizontal stresses. Efforts at mechanically modeling the Sylvania were made to account for the measurements and observations. Linear arch theory was used for an elastic analysis. Linear arch theory predicts two modes of failure: (1) arch crushing, a compressive failure of the upper portion of the arch due to compressive stresses exceeding the compressive strength of the material, and (2) arch collapse, a sagging of the beds due to compressive strains which reduce the arch line to a length less than the original arch length. The arch crushing mode of failure would then yield the loose granular sand as observed in laboratory testing. Arch collapse would simply result in bed sagging without granulation of the sandstone. Arch collapse is favored by thin-bedded material while arch crushing is favored by thick-bedded material. Arch crushing seems to be a likely mode of failure for the Windsor-Detroit sinks. It is believed that after a crushing failure the sand-water slurry (specific gravity 1.2) which exceeds the density of the cavity brine will migrate downward through cracks and open joints eventually reaching the practically limitless open spaces of the rubble column and salt cavity. As the extent of the cavity within the Sylvania increases in depth and width because of sand migration, a critical span will be reached where the immediately overlying upper Sylvania and the overlying Detroit River Dolomite will fail. The collapse will allow a path for the approximately 100 ft of clay to collapse, resulting in a sink as the surface manifestation.
Reinforcement mechanism of multi-anchor wall with double wall facing
NASA Astrophysics Data System (ADS)
Suzuki, Kouta; Kobayashi, Makoto; Miura, Kinya; Konami, Takeharu; Hayashi, Taketo
2017-10-01
The reinforced soil wall has high seismic performance as generally known. However, the seismic behavior has not been clarified accurately yet, especially on multi-anchor wall with double wall facing. Indefinite behavior of reinforced soil wall during earthquake make us complicated in case with adopting to the abutment, because of arrangement of anchor plate as reinforcement often different according to the width of roads. In this study, a series of centrifuge model tests were carried out to investigate the reinforcement mechanism of multi anchor wall with double wall facing from the perspective of the vertical earth pressure. Several types of reinforce arrangement and rigid wall were applied in order to verify the arch function in the reinforced regions. The test results show unique behavior of vertical earth pressure, which was affected by arch action. All the vertical earth pressure placed behind facing panel, are larger than that of middle part between facing panel despite of friction between backfill and facing panel. Similar results were obtained in case using rigid wall. On the other hands, the vertical earth pressure, which were measured at the 3cm high from bottom of model container, shows larger than that of bottom. This results show the existence of arch action between double walls. In addition, it implies that the wall facing of such soil structure confined the backfill as pseudo wall, which is very reason that the multi anchor wall with double wall facing has high seismic performance.
Fu, Xiaoming; Peng, Chun; Li, Zan; Liu, Shan; Tan, Minmin; Song, Jinlin
2017-01-01
To explore a new technique for reconstructing and measuring three-dimensional (3D) models of orthodontic plaster casts using multi-baseline digital close-range photogrammetry (MBDCRP) with a single-lens reflex camera. Thirty sets of orthodontic plaster casts that do not exhibit severe horizontal overlap (>2 mm) between any two teeth were recorded by a single-lens reflex camera with 72 pictures taken in different directions. The 3D models of these casts were reconstructed and measured using the open source software MeshLab. These parameters, including mesio-distal crown diameter, arch width, and arch perimeter, were recorded six times on both the 3D digital models and on plaster casts by two examiners. Statistical analysis was carried out using the Bland-Altman method to measure agreement between the novel method and the traditional calliper method by calculating the differences between mean values. The average differences between the measurements of the photogrammetric 3D models and the plaster casts were 0.011-0.402mm. The mean differences between measurements obtained by the photogrammetric 3D models and the dental casts were not significant except for the lower arch perimeter (P>0.05), and all the differences were regarded as clinically acceptable (<0.5 mm). Measurements obtained by MBDCRP are compared well with those obtained from plaster casts, indicating that MBDCRP is an alternate way to store and measure dental plaster casts without severe horizontal overlap between any two teeth.
Geometric morphometric footprint analysis of young women
2013-01-01
Background Most published attempts to quantify footprint shape are based on a small number of measurements. We applied geometric morphometric methods to study shape variation of the complete footprint outline in a sample of 83 adult women. Methods The outline of the footprint, including the toes, was represented by a comprehensive set of 85 landmarks and semilandmarks. Shape coordinates were computed by Generalized Procrustes Analysis. Results The first four principal components represented the major axes of variation in foot morphology: low-arched versus high-arched feet, long and narrow versus short and wide feet, the relative length of the hallux, and the relative length of the forefoot. These shape features varied across the measured individuals without any distinct clusters or discrete types of footprint shape. A high body mass index (BMI) was associated with wide and flat feet, and a high frequency of wearing high-heeled shoes was associated with a larger forefoot area of the footprint and a relatively long hallux. Larger feet had an increased length-to-width ratio of the footprint, a lower-arched foot, and longer toes relative to the remaining foot. Footprint shape differed on average between left and right feet, and the variability of footprint asymmetry increased with BMI. Conclusions Foot shape is affected by lifestyle factors even in a sample of young women (median age 23 years). Geometric morphometrics proved to be a powerful tool for the detailed analysis of footprint shape that is applicable in various scientific disciplines, including forensics, orthopedics, and footwear design. PMID:23886074
"Dangerous" anatomic varieties of recurrent motor branch of median nerve.
Elsaftawy, Ahmed; Gworys, Bohdan; Jabłecki, Jerzy; Szajerka, Tobiasz
2013-08-01
Carpal tunnel release became one of the most common operations in the field of hand surgery. Many controversies has been made about frequency of the so-called dangerous variations of motor branch of the median nerve. Knowledge of all the anatomical variations motor branches is the duty of every surgeon dealing with the subject. The aim of the study was to present the incidence of dangerous variants of median nerve motor branch in the carpal tunnel based on both clinical experience and anatomical studies performed on 20 cadaver wrists. Between 2006-2012 during minimally open carpal tunnel release we made photographic documentation of all visible dangerous varieties of recurrent motor branches of the median nerve. We also studied 20 cadaver wrists in the Department of Anatomy Medical University in Wrocław. Dangerous varieties of the motor branch of median nerve was found in three clinical cases and in one cadaver wrist. Also In one wrist we found one regular branche, which, however, has atypical two separate branches supplying the thenar muscles. Dangerous varieties of the motor branch of median nerve occur very rare in the population, but does not release from the fact that in each case special attention must be given.We also conclude that, at the minimally open carpal tunnel release procedure, the transverse carpal ligament should be released rather from the line of radial border of the 4th finger to minimize the risk of injury to the recurrent motor branch of median nerve.
Radiographic changes in Thoroughbred yearlings in South Africa.
Furniss, C; Carstens, A; van den Berg, S S
2011-12-01
This study involves the evaluation of pre-purchase radiographic studies of South African Thoroughbred yearlings. Radiographic changes were recorded and compared with similar international studies. The study differs from other studies in that a lower prevalence of pedal osteitis (1.26%), dorsal osteochondral fragmentation of the metatarsophalangeal joint (1.60%), distal metacarpal sagittal ridge changes (15.7%), ulnar carpal bone lucencies (8.33%), carpal osteophytes (1.19%), distal intertarsal and tarsometatarsal joint radiographic changes (9.92%), tarsal osteochondrosis lesions (4.40%) and stifle osteochondrosis lesions (0.4%) was found. The prevalence of dorsal osteochondral fragments in the metacarpophalangeal joint was similar to other studies (1.60%). A higher prevalence of vascular channels as well as irregular borders and lucencies was evident in the proximal sesamoid bones. There was a higher prevalence of palmar metacarpophalangeal and plantar metatarsophalangeal osteochondral fragments (2% and 7.10% respectively). Palmar metacarpal disease, metacarpal supracondylar lysis, proximal sesamoid bone fractures and carpal osteochondral fragmentation were absent in the current study. Additional findings recorded in the current study were proximal interphalangeal joint hyperextension (left front 15.13%, right front 18.91%), the solar angle (right front 2.38 degrees, left front 2.79 degrees), the prevalence of carpal bone 1 (30.95%) and carpal bone 5 (1.59%). Management, nutrition and genetics in the various groups of Thoroughbred yearlings should be further investigated in order to explain the reasons for the differences recorded in the current study.
[Muscular control of scapholunate instability. An experimental study].
León-López, M M; García-Elías, M; Salvà-Coll, G; Llusá-Perez, M; Lluch-Bergadà, A
2014-01-01
As long as the neuromuscular stabilizers are intact, a lesion of the scapholunate ligament may or may not progress to a carpal instability. The mechanisms by which the muscles compensate this defect are not very well known. We designed an experimental study with the aim of clarifying these mechanisms. Using 10 fresh wrists, with no pre-existing lesions, we studied the movements of the scaphoid, triquetrum and capitate produced by the isometrical loading of the muscles which move the wrist, each of them isolated or combined, before and after cutting off the scapholunate ligaments. To do this, we placed sensors in each of these bones and used the Fastrack system to record these movements. The simultaneous loading of the muscles of the wrist produce rotational movements in flexion and supination of the proximal carpal row. After cutting off the scapholunate ligaments, the scaphoid rotates in pronation and flexion, while the triquetrum rotates in pronation and extension. In this situation of a scapholunate lesion, the muscles that worsen the carpal dexasation are the extensor carpi ulnaris and flexor carpi ulnaris. On the other hand, the isolated loading of the radial muscles reduce the scapholunate diastasis, thus improving the carpal alignment. In dynamic scapholunate instabilities, isometric contraction of the ulnar carpal muscles must be avoided, as it promotes the scapholunate diastasis. The rest of the muscles have the opposite effect, stabilizing the carpus when primary stabilizers have failed. Copyright © 2013 SECOT. Published by Elsevier Espana. All rights reserved.
Buller, Mitchell; Schulz, Steven; Kasdan, Morton; Wilhelmi, Bradon J
2017-07-01
To determine the incidence of complex regional pain syndrome (CRPS) in the concurrent surgical treatment of Dupuytren contracture (DC) and carpal tunnel syndrome (CTS) through a thorough review of evidence available in the literature. The indices of 260 hand surgery books and PubMed were searched for concomitant references to DC and CTS. Studies were eligible for inclusion if they evaluated the outcome of patients treated with simultaneous fasciectomy or fasciotomy for DC and carpal tunnel release using CRPS as a complication of treatment. Of the literature reviewed, only 4 studies met the defined criteria for use in the study. Data from the 4 studies were pooled, and the incidence of recurrence and complications, specifically CRPS, was noted. The rate of CRPS was found to be 10.4% in the simultaneous treatment group versus 4.1% in the fasciectomy-only group. This rate is nearly half the 8.3% rate of CRPS found in a randomized trial of patients undergoing carpal tunnel release. Our analysis demonstrates a marginal increase in the occurrence of CRPS by adding the carpal tunnel release to patients in need of fasciectomy, contradicting the original reports demonstrating a much higher rate of CRPS. This indicates that no clear clinical risk is associated with simultaneous surgical treatment of DC and CTS. In some patients, simultaneous surgical management of DC and CTS can be accomplished safely with minimal increased risk of CRPS type 1.
Mlakar, Maja; Ramstrand, Nerrolyn; Burger, Helena; Vidmar, Gaj
2014-06-01
Based on the literature, patients with carpal tunnel syndrome are suggested to wear a custom-made wrist orthosis immobilizing the wrist in a neutral position. Many prefabricated orthoses are available on the market, but the majority of those do not assure neutral wrist position. We hypothesized that the use of orthosis affects grip strength in persons with carpal tunnel syndrome in a way that supports preference for custom-made orthoses with neutral wrist position over prefabricated orthoses. Experimental. Comparisons of grip strength for three types of grips (cylindrical, lateral, and pinch) were made across orthosis types (custom-made, prefabricated with wrist in 20° of flexion, and none) on the affected side immediately after fitting, as well as between affected side without orthosis and nonaffected side. Orthosis type did not significantly affect grip strength (p = 0.661). Cylindrical grip was by far the strongest, followed by lateral and pinch grips (p < 0.050). The grips of the affected side were weaker than those of the nonaffected side (p = 0.002). In persons with carpal tunnel syndrome, neither prefabricated orthoses with 20° wrist extension nor custom-made wrist orthoses with neutral wrist position influenced grip strength of the affected hand. Compared to the nonaffected side, the grips of the affected side were weaker. The findings from this study can be used to guide application of orthoses to patients with carpal tunnel syndrome. © The International Society for Prosthetics and Orthotics 2013.
de la Llave-Rincón, Ana Isabel; Fernández-de-las-Peñas, César; Laguarta-Val, Sofia; Alonso-Blanco, Cristina; Martínez-Perez, Almudena; Arendt-Nielsen, Lars; Pareja, Juan A
2011-01-01
To determine the differences in widespread pressure pain and thermal hypersensitivity in women with minimal, moderate, and severe carpal tunnel syndrome (CTS) and healthy controls. A total of 72 women with CTS (19 with minimal, 18 with moderate, and 35 with severe) and 19 healthy age-matched women participated. Pressure pain thresholds were bilaterally assessed over the median, ulnar, and radial nerves, the C5 to C6 zygapophyseal joint, the carpal tunnel, and the tibialis anterior muscle. In addition, warm and cold detection thresholds and heat and cold pain thresholds were bilaterally assessed over the carpal tunnel and the thenar eminence. All outcome parameters were assessed by an assessor blinded to the participant's condition. No significant differences in pain parameters among patients with minimal, moderate, and severe CTS were found. The results showed that PPT were significantly decreased bilaterally over the median, ulnar, and radial nerve trunks, the carpal tunnel, C5 to C6 zygapophyseal joint, and the tibialis anterior muscle in patients with minimal, moderate, or severe CTS as compared with healthy controls (all, P<0.001). In addition, patients with CTS also showed lower heat pain threshold and reduced cold pain threshold compared with controls (P<0.001). No significant sensory differences between minimal, moderate, or severe CTS were found. The similar widespread pressure and thermal hypersensitivity in patients with minimal, moderate, or severe CTS and pain intensity suggests that increased pain sensitivity is not related to electrodiagnostic findings.
An analysis of maxillary anterior teeth: facial and dental proportions.
Hasanreisoglu, Ufuk; Berksun, Semih; Aras, Kerem; Arslan, Ilker
2005-12-01
The size and form of the maxillary anterior teeth are important in achieving pleasing dental and facial esthetics. However, little scientific data have been defined as criteria for evaluating these morphological features. This study analyzed the clinical crown dimensions of maxillary anterior teeth to determine whether consistent relationships exist between tooth width and several facial measurements in a subset of the Turkish population. Full-face and anterior tooth images of 100 Turkish dental students viewed from the front and engaged in maximum smiling were recorded with digital photography under standardized conditions. Gypsum casts of the maxillary arches of the subjects were also made. The dimensions of the anterior teeth, the occurrence of the golden ratio, the difference between the actual and perceived sizes, and the relationship between the anterior teeth and several facial measurements by gender were analyzed using the information obtained from both the computer images and the casts. One-sample, 2-sample, and paired t tests, and repeated-measures analysis of variance and Duncan multiple-range tests were performed to analyze the data (alpha=.05). The dimensions of the central incisors (P<.05) and canines (P<.01) varied by gender. The existence of the so-called "golden proportion" for the maxillary anterior teeth as a whole was not found. Significant differences emerged when the mean ratios between various perceived widths were compared with their ideal golden ratios (P<.01). Proportional relationships between the bizygomatic width and the width of the central incisor, and the intercanine distance and the interalar width in women were observed. The maxillary central incisor and canine dimensions of men were greater than those of women in the Turkish population studied, with the canines showing the greatest gender variation. Neither a golden proportion nor any other recurrent proportion for all anterior teeth was determined. Bizygomatic width and interalar width may serve as references for establishing the ideal width of the maxillary anterior teeth, particularly in women.
Three-dimensional modeling and animation of two carpal bones: a technique.
Green, Jason K; Werner, Frederick W; Wang, Haoyu; Weiner, Marsha M; Sacks, Jonathan M; Short, Walter H
2004-05-01
The objectives of this study were to (a). create 3D reconstructions of two carpal bones from single CT data sets and animate these bones with experimental in vitro motion data collected during dynamic loading of the wrist joint, (b). develop a technique to calculate the minimum interbone distance between the two carpal bones, and (c). validate the interbone distance calculation process. This method utilized commercial software to create the animations and an in-house program to interface with three-dimensional CAD software to calculate the minimum distance between the irregular geometries of the bones. This interbone minimum distance provides quantitative information regarding the motion of the bones studied and may help to understand and quantify the effects of ligamentous injury.
Treatment effects of microimplant-aided sliding mechanics on distal retraction of posterior teeth.
Oh, Young-Hee; Park, Hyo-Sang; Kwon, Tae-Geon
2011-04-01
Our objective was to quantify the treatment effects of microimplant-aided mechanics on group distal retraction of the posterior teeth. The pretreatment and posttreatment cephalometric radiographs and dental casts of 23 patients (mean age, 22.1 ± 5.17 years), treated with distalization of the posterior teeth against microimplant anchorage and without extraction of the premolars or other teeth except the third molars, were used. The soft-tissue, skeletal, and dental measurements in the vertical and anteroposterior dimensions were analyzed. The changes in interpremolar and intermolar widths and rotations of the molars were analyzed with dental casts. The upper and lower lips were repositioned distally. The Frankfort horizontal to mandibular plane angle was decreased in the adult group. The maxillary posterior teeth were distalized by 1.4 to 2.0 mm with approximately 3.5° of distal tipping, and the mandibular posterior teeth were also distalized by 1.6 to 2.5 mm with approximately 6.6° to 8.3° of distal tipping. The maxillary posterior teeth showed intrusion by 1 mm. There were increases in arch widths at the premolars and molars. The overall success of microimplants was 89.7%; a well-experienced clinician had a higher success rate (98%) than did novices in this sample. The mean treatment time was 20 ± 4.9 months. With microimplant-aided sliding mechanics, clinicians can distalize all posterior teeth together with less distal tipping. The technique seems effective and efficient to treat patients who have mild arch length discrepancy without extractions. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Sex-Related Differences in the Developmental Morphology of the Atlas: A Computed Tomography Study.
Asukai, Mitsuru; Fujita, Tomotada; Suzuki, Daisuke; Nishida, Tatsuya; Ohishi, Tsuyoshi; Matsuyama, Yukihiro
2018-05-15
A retrospective study. To elucidate sex-related differences in the age at synchondroses closure, the normative size of the atlas, and the ossification patterns of the atlas in Japanese children. The atlas develops from three ossification centers during childhood. The anterior and posterior synchondroses, which are separate ossification centers, mimic fracture lines on computed tomography (CT). Sex-related differences of age dependent morphological changes of the atlas in a large sample size have not been reported. This study analyzed data of 688 subjects (449 boys) between 0 and 18 years old who underwent CT examination of the head and/or neck between January 2010 and July 2016. The age at synchondroses closure, anteroposterior outer, inner, and spinal canal widths of the atlas, and variations of the ossification centers were examined. Anterior synchondroses closed by 10 years in boys and by 7 years in girls. Significant earlier closure of anterior synchondroses was observed in girls than in boys (P < 0.05 at 4 and 5 years old). Posterior synchondrosis closed by 6 years in boys and by 5 years in girls. The outer, inner, and spinal canal widths increased up to 10 to 15 years in both sexes, although all three parameters in girls peaked 3 years earlier than those in boys. All parameters in boys were significantly larger than those in girls, except in the 10- to 12-year-old age category. Two or more ossification centers in the anterior arch were observed in 18.3% subjects, and 6% had midline ossification centers in the posterior arch of the atlas. Distinct sex-related differences in the age at anterior synchondroses closure and the size of the atlas were observed in Japanese children. Knowledge of morphological features of the atlas could help distinguish fractures from synchondroses. 3.
Park, Heon-Mook; Kim, Byoung-Ho; Yang, Il-Hyung; Baek, Seung-Hak
2012-12-01
This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.
NASA Astrophysics Data System (ADS)
Martinez, S.
2016-12-01
The island of Puerto Rico in the northern Caribbean covers an area of about 14,000 km2 and is 180 km long and 65 km wide and is densely populated by 3.4 million persons. The island is mountainous with an east-west-trending, central mountain range with its highest point of 1338 m in the geographic center of the island. Previous workers have suggested that the origin of this east-west, Central Cordillera is active uplift and folding of a large, east-west-trending anticline whose fold axis is coincident with the topographic crest of the Cordillera Central. The folding mechanism has been attributed by previous workers to obliquely-subducting slabs of the North American and Caribbean plates beneath the island. To test the hypothesis that this topographic and structural axis is also the axis of active topographic uplift, I created a knickpoint density map for the island based on over 50 different river systems to reveal areas of active uplift. The knickpoint map shows an excellent correlation with the proposed arch both in width and trend of the axis and supports the conclusion that the arch is the main axis of active uplift on the Island. I also calculated geomorphic indices for 21 different watersheds of the island that include the Hypsometric Integral and a Stream Length Gradient Index that both assess tectonic activity based on stream and watershed behaviors. The Hack index and Hypsometric Integral show that the most active area of uplift is located in the central and north-central parts of the island that include about one half of the length of the proposed, east-west-trending arch. The two topographically-elevated ends of the arch in the western and eastern parts of the island are less active, according to the indices. Lower values in these areas may be influenced by higher amounts of precipitations in these areas.
Lewańska, Magdalena; Walusiak-Skorupa, Jolanta
2014-01-01
Carpal tunnel syndrome (CTS) is the most common neuropathy of upper limbs and a leading cause of upper extremity musculoskeletal disorders, in terms of work exposure, repetitive and forceful exertions of the hand and use of vibrating hand tools. The aim of the study was to evaluate etiological factors of carpal tunnel syndrome in subjects occupationally exposed to monotype movements in wrist. We conducted the retrospective analysis of 300 patients (261 women, 39 men), mean age 52 years (standard deviation: +/-6.93) hospitalized with the suspicion of occupational CTS. The study revealed high percentage (68.7%) of diseases and systemic factors involved in the pathogenesis of CTS in the analyzed population, especially obesity (32%), thyroid diseases (28.7%), hormone replacement therapy and/or oophorectomy (16.3%) and diabetes mellitus (12%). In 111 patients the coexistence of at least a couple of potential etiological factors of the neuropathy was recognized. Clinical analysis and occupational exposure allowed to diagnose occupational carpal tunnel syndrome in 18 (6%) patients only. The undeniable long-term (20(.2+/-9.3 years) occupational exposure to repetitive, forceful movements in the wrist was observed in this group. The results of our study indicated that non-occupational etiological factors of CTS predominated and in 37% of patients at least several factors were found. The analysis showed the high prevalence of CTS in workers employed in various sectors of industry, including so called "blue collar" workers. Our study confirmed the multifactorial etiology of carpal tunnel syndrome, however, occupational agents contributed to only 6% of cases.
[Case report: acute carpal tunnel syndrome with prolapse of the median nerve].
Kindler, C; Lukas, B
2013-10-01
We report a case of an 80-year-old woman with an acute carpal tunnel syndrome. This was based on an acute episode of chondrocalcinoses and accompagnied by a prolaps of the median nerve into a gap of the forearm fascia as result of a cut injury in childhood. © Georg Thieme Verlag KG Stuttgart · New York.
Yoga Asanas for the Relief and Prevention of Carpal Tunnel Syndrome.
ERIC Educational Resources Information Center
Beleu, Steve
This collection of yoga asanas (exercises) can help relieve the pain of carpal tunnel syndrome (CTS) and help prevent CTS among people who work on computer terminals. For maximum benefit, the exercises should be practiced daily or on as regular a schedule as possible. They are not intended to replace surgery or a physician's prescribed care. They…
Yucel, Hulya
2015-01-01
[Purpose] The aim of this retrospective study was to determine the associations between clinical, physical, and neurophysiological outcomes and self-reported symptoms and functions of patients after surgical carpal tunnel release. [Subjects and Methods] Among 261 patients who had undergone open surgical carpal tunnel release within the last three years, 83 (mean age 50.27 ± 11.13 years) participated in this study. Their socio-demographics and comorbidities were recorded. The intensity of pain, paresthesia, and fatigue symptoms in the hand were assessed by means of a Visual Analogue Scale, the Semmes-Weinstein Monofilaments test of light touch pressure sensation, and Jamar dynamometry for measurement of grip and pinch strengths. The Boston Carpal Tunnel Questionnaire evaluated the severity of symptoms and hand functional status, and the variables were analyzed by multivariate linear regression. [Results] The severity of the symptoms and functional status of release surgery patients was associated with diabetes mellitus, migraine, night pain, paresthesia and fatigue symptoms, impaired light touch pressure, and lack of medical treatment. [Conclusion] Appropriate post-surgery treatment programs for these factors should be taken into consideration to help patients obtain optimal functionality and health in their daily lives. PMID:25995565
Risk factors for operated carpal tunnel syndrome: a multicenter population-based case-control study
Mattioli, Stefano; Baldasseroni, Alberto; Bovenzi, Massimo; Curti, Stefania; Cooke, Robin MT; Campo, Giuseppe; Barbieri, Pietro G; Ghersi, Rinaldo; Broccoli, Marco; Cancellieri, Maria Pia; Colao, Anna Maria; dell'Omo, Marco; Fateh-Moghadam, Pirous; Franceschini, Flavia; Fucksia, Serenella; Galli, Paolo; Gobba, Fabriziomaria; Lucchini, Roberto; Mandes, Anna; Marras, Teresa; Sgarrella, Carla; Borghesi, Stefano; Fierro, Mauro; Zanardi, Francesca; Mancini, Gianpiero; Violante, Francesco S
2009-01-01
Background Carpal tunnel syndrome (CTS) is a socially and economically relevant disease caused by compression or entrapment of the median nerve within the carpal tunnel. This population-based case-control study aims to investigate occupational/non-occupational risk factors for surgically treated CTS. Methods Cases (n = 220) aged 18-65 years were randomly drawn from 13 administrative databases of citizens who were surgically treated with carpal tunnel release during 2001. Controls (n = 356) were randomly sampled from National Health Service registry records and were frequency matched by age-gender-specific CTS hospitalization rates. Results At multivariate analysis, risk factors were blue-collar/housewife status, BMI ≥ 30 kg/m2, sibling history of CTS and coexistence of trigger finger. Being relatively tall (cut-offs based on tertiles: women ≥165 cm; men ≥175 cm) was associated with lower risk. Blue-collar work was a moderate/strong risk factor in both sexes. Raised risks were apparent for combinations of biomechanical risk factors that included frequent repetitivity and sustained force. Conclusion This study strongly underlines the relevance of biomechanical exposures in both non-industrial and industrial work as risk factors for surgically treated CTS. PMID:19758429
Sandow, M J; Fisher, T J; Howard, C Q; Papas, S
2014-05-01
This study was part of a larger project to develop a (kinetic) theory of carpal motion based on computationally derived isometric constraints. Three-dimensional models were created from computed tomography scans of the wrists of ten normal subjects and carpal spatial relationships at physiological motion extremes were assessed. Specific points on the surface of the various carpal bones and the radius that remained isometric through range of movement were identified. Analysis of the isometric constraints and intercarpal motion suggests that the carpus functions as a stable central column (lunate-capitate-hamate-trapezoid-trapezium) with a supporting lateral column (scaphoid), which behaves as a 'two gear four bar linkage'. The triquetrum functions as an ulnar translation restraint, as well as controlling lunate flexion. The 'trapezoid'-shaped trapezoid places the trapezium anterior to the transverse plane of the radius and ulna, and thus rotates the principal axis of the central column to correspond to that used in the 'dart thrower's motion'. This study presents a forward kinematic analysis of the carpus that provides the basis for the development of a unifying kinetic theory of wrist motion based on isometric constraints and rules-based motion.
Low-power laser therapy for carpal tunnel syndrome: effective optical power
Chen, Yan; Zhao, Cheng-qiang; Ye, Gang; Liu, Can-dong; Xu, Wen-dong
2016-01-01
Low-power laser therapy has been used for the non-surgical treatment of mild to moderate carpal tunnel syndrome, although its efficacy has been a long-standing controversy. The laser parameters in low-power laser therapy are closely related to the laser effect on human tissue. To evaluate the efficacy of low-power laser therapy, laser parameters should be accurately measured and controlled, which has been ignored in previous clinical trials. Here, we report the measurement of the effective optical power of low-power laser therapy for carpal tunnel syndrome. By monitoring the backside reflection and scattering laser power from human skin at the wrist, the effective laser power can be inferred. Using clinical measurements from 30 cases, we found that the effective laser power differed significantly among cases, with the measured laser reflection coefficient ranging from 1.8% to 54%. The reflection coefficient for 36.7% of these 30 cases was in the range of 10–20%, but for 16.7% of cases, it was higher than 40%. Consequently, monitoring the effective optical power during laser irradiation is necessary for the laser therapy of carpal tunnel syndrome. PMID:27630706
A randomized, controlled trial of magnetic therapy for carpal tunnel syndrome.
Baute, Vanessa; Keskinyan, Vahakn S; Sweeney, Erica R; Bowden, Kayla D; Gordon, Allison; Hutchens, Janet; Cartwright, Michael S
2018-03-07
Magnet therapy has been proposed as a treatment for neurologic conditions. In this this trial we assessed the feasibility and efficacy of a magnet inserted into a wristband for carpal tunnel syndrome (CTS). Twenty-two patients with mild to moderate CTS were randomized to wear a high-dose or low-dose "sham" magnetic wristband for 6 weeks. The primary outcome was the Symptom Severity Scale (SSS) of the Boston Carpal Tunnel Questionnaire. Secondary measures were nerve conduction studies (NCS), median nerve ultrasound, and compliance. Compliance for both groups was >90%. Improvements in the mean SSS, NCS, and median nerve ultrasound did not reach statistical significance. Magnet therapy via wristband is well-tolerated. Further investigations in larger populations are needed to determine efficacy. Muscle Nerve, 2018. © 2018 Wiley Periodicals, Inc.
Supraretinacular endoscopic carpal tunnel release: surgical technique with prospective case series.
Ecker, J; Perera, N; Ebert, J
2015-02-01
Current techniques for endoscopic carpal tunnel release use an infraretinacular approach, inserting the endoscope deep to the flexor retinaculum. We present a supraretinacular endoscopic carpal tunnel release technique in which a dissecting endoscope is inserted superficial to the flexor retinaculum, which improves vision and the ability to dissect and manipulate the median nerve and tendons during surgery. The motor branch of the median nerve and connections between the median and ulnar nerve can be identified and dissected. Because the endoscope is inserted superficial to the flexor retinaculum, the median nerve is not compressed before division of the retinaculum and, as a result, we have observed no cases of the transient median nerve deficits that have been reported using infraretinacular endoscopic techniques. © The Author(s) 2014.
A new technique of single portal endoscopic carpal tunnel release.
Ip, Wing-Yuk Josephine; Sweed, Tamer Ahmed; Fung, Kwok Keung Boris; Tipoe, George L; Pun, Tze Shing
2012-03-01
Since the first description of endoscopic carpal tunnel release (ECTR) in 1987 by Okutsu many endoscopic techniques have been developed, but the majority of the literature on ECTR has dealt with the Chow and Agee techniques. ECTR is indicated for carpal tunnel syndrome that is not responding to conservative treatment for 6 months. This new technique of ECTR is a single-portal technique using instruments originally designed for endoscopic cubital tunnel release, with no disposable instruments used. It also has the advantage of performing the release with the median nerve protected under direct vision. Ten cases were operated with this technique after performing the procedure on 8 hands of 4 fresh frozen cadavers. There were no neurovascular or tendon injuries with this technique and patients were satisfied with the results.
Cardaropoli, Daniele; Tamagnone, Lorenzo; Roffredo, Alessandro; Gaveglio, Lorena
2015-01-01
In the maxillary arch from premolar to premolar, 26 single dental implants were inserted in fresh extraction sockets and immediately provisionalized. The bone-to-implant gap was grafted with a bovine bone mineral. After 3 months, definitive ceramic crowns were placed. At baseline and after 1 year, the soft tissue horizontal width, mesiodistal papillary level, midfacial gingival level, and pink esthetic score were evaluated. No statistical differences were found between baseline and 1 year for all parameters. Immediate single-tooth implants, with immediate restoration, are capable of maintaining the soft tissue contour and esthetics compared to the pretreatment status.
Melorheostosis of the humerus: a rare differential diagnosis of carpal tunnel syndrome.
De Vos, J; Mulliez, A; De Loore, G
2010-04-01
Melorheostosis is an uncommon and rare linear hyperostosis, which can be complicated by soft tissue changes. We present a case of this disorder in the humerus, clinically referred because of carpal tunnel syndrome. Although treatment is usually conservative, in this case, a neurolysis and resection of the sclerotic bone were done with good clinical result. Copyright 2010 Elsevier Masson SAS. All rights reserved.
Carpal spasm in a girl as initial presentation of celiac disease: a case report.
Ramosaj-Morina, Atifete; Keka-Sylaj, A; Hasbahta, V; Baloku-Zejnullahu, A; Azemi, M; Zunec, R
2017-09-04
Celiac disease is an immune-mediated disorder elicited by ingestion of gluten in genetically susceptible persons. This disorder is characterized by specific histological changes of the small intestine mucosa resulting in malabsorption. This case was written up as it was an unusual and dramatic presentation of celiac disease. We report the case of a 3-year-old Albanian girl who presented at our clinic with carpal spasms and hand paresthesia. A physical examination at admission revealed a relatively good general condition and body weight of 10.5 kg (10 percentile). Carpal spasms and paresthesias of her extremities were present. Neuromuscular irritability was demonstrated by positive Chvostek and Trousseau signs. Blood tests showed severe hypocalcemia with a total serum calcium of 1.2 mmol/L (normal range 2.12 to 2.55 mmol/L), ionized calcium of 0.87 (normal range 1.11 to 1.30 mmol/L), and 24-hour urine calcium excretion of 9.16 mmol (normal range female <6.2 mmol/day). Among other tests, screening for celiac disease was performed: antigliadin immunoglobulin A, anti-tissue transglutaminase, and anti-endomysial immunoglobulin A antibodies were positive. A duodenal biopsy revealed lymphocyte infiltration, crypt hyperplasia, and villous atrophy compatible with celiac disease grade IIIb according to the Marsh classification. Following the diagnosis of celiac disease, human leukocyte antigen typing was performed, giving a definite diagnosis of celiac disease. She was started on a gluten-free diet. Due to failure to follow a gluten-free diet, episodes of carpal spasms appeared again. Unfortunately, at the age of 7 years she presents with delayed psychophysical development. Although hypocalcemia is a common finding in celiac disease, hypocalcemic carpal spasm is a rare initial manifestation of the disease. Therefore, the possibility of celiac disease should be considered in patients with repeated carpal spasms that seem unduly difficult to treat. This should be evaluated even in the absence of gastrointestinal symptoms since hypocalcemia and its manifestation may present as initial symptoms of celiac disease even in young children.
Foot structure is significantly associated to subtalar joint kinetics and mechanical energetics.
Maharaj, Jayishni N; Cresswell, Andrew G; Lichtwark, Glen A
2017-10-01
Foot structure has been implicated as a risk factor of numerous overuse injuries, however, the mechanism linking foot structure and the development of soft-tissue overuse injuries are not well understood. The aim of this study was to identify factors that could predict foot function during walking. A total of eleven variables (including measures of foot structure, anthropometry and spatiotemporal gait characteristics) were investigated for their predictive ability on identifying kinematic, kinetic and energetic components of the foot. Three-dimensional motion capture and force data were collected at preferred walking speed on an instrumented treadmill. Mechanical measures were subsequently assessed using a custom multi-segment foot model in Opensim. Factors with significant univariate associations were entered into multiple linear regression models to identify a group of factors independently associated with the mechanical measures. Although no model could be created for any of the kinematic measures analysed, approximately 46% and 37% of the variance in the kinetic and energetic measures were associated with three or two factors respectively. Arch-height ratio, foot length and step width were associated with peak subtalar joint (STJ) moment, while greater STJ negative work was correlated to a low arch-height ratio and greater foot mobility. The models presented in this study suggest that the soft-tissue structures of a flat-arched, mobile foot are at a greater risk of injury as they have greater requirements to absorb energy and generate larger forces. However, as these associations are only moderate, other measures may also have an influence. Copyright © 2017. Published by Elsevier B.V.
Li, Zan; Liu, Shan; Tan, Minmin; Song, Jinlin
2017-01-01
Objective To explore a new technique for reconstructing and measuring three-dimensional (3D) models of orthodontic plaster casts using multi-baseline digital close-range photogrammetry (MBDCRP) with a single-lens reflex camera. Study design Thirty sets of orthodontic plaster casts that do not exhibit severe horizontal overlap (>2 mm) between any two teeth were recorded by a single-lens reflex camera with 72 pictures taken in different directions. The 3D models of these casts were reconstructed and measured using the open source software MeshLab. These parameters, including mesio-distal crown diameter, arch width, and arch perimeter, were recorded six times on both the 3D digital models and on plaster casts by two examiners. Statistical analysis was carried out using the Bland–Altman method to measure agreement between the novel method and the traditional calliper method by calculating the differences between mean values. Results The average differences between the measurements of the photogrammetric 3D models and the plaster casts were 0.011–0.402mm. The mean differences between measurements obtained by the photogrammetric 3D models and the dental casts were not significant except for the lower arch perimeter (P>0.05), and all the differences were regarded as clinically acceptable (<0.5 mm). Conclusions Measurements obtained by MBDCRP are compared well with those obtained from plaster casts, indicating that MBDCRP is an alternate way to store and measure dental plaster casts without severe horizontal overlap between any two teeth. PMID:28640827
WRIST: A WRist Image Segmentation Toolkit for carpal bone delineation from MRI.
Foster, Brent; Joshi, Anand A; Borgese, Marissa; Abdelhafez, Yasser; Boutin, Robert D; Chaudhari, Abhijit J
2018-01-01
Segmentation of the carpal bones from 3D imaging modalities, such as magnetic resonance imaging (MRI), is commonly performed for in vivo analysis of wrist morphology, kinematics, and biomechanics. This crucial task is typically carried out manually and is labor intensive, time consuming, subject to high inter- and intra-observer variability, and may result in topologically incorrect surfaces. We present a method, WRist Image Segmentation Toolkit (WRIST), for 3D semi-automated, rapid segmentation of the carpal bones of the wrist from MRI. In our method, the boundary of the bones were iteratively found using prior known anatomical constraints and a shape-detection level set. The parameters of the method were optimized using a training dataset of 48 manually segmented carpal bones and evaluated on 112 carpal bones which included both healthy participants without known wrist conditions and participants with thumb basilar osteoarthritis (OA). Manual segmentation by two expert human observers was considered as a reference. On the healthy subject dataset we obtained a Dice overlap of 93.0 ± 3.8, Jaccard Index of 87.3 ± 6.2, and a Hausdorff distance of 2.7 ± 3.4 mm, while on the OA dataset we obtained a Dice overlap of 90.7 ± 8.6, Jaccard Index of 83.0 ± 10.6, and a Hausdorff distance of 4.0 ± 4.4 mm. The short computational time of 20.8 s per bone (or 5.1 s per bone in the parallelized version) and the high agreement with the expert observers gives WRIST the potential to be utilized in musculoskeletal research. Copyright © 2017 Elsevier Ltd. All rights reserved.
Daver, Guillaume; Berillon, Gilles; Grimaud-Hervé, Dominique
2012-01-01
The purpose of this study is to provide new data on carpal kinematics in primates in order to deepen our understanding of the relationships between wrist morphology and function. To that end, we provide preliminary data on carpal kinematics in seven species of quadrupedal monkeys that have not been previously investigated in this regard (cercopithecoids, n = 4; ceboids, n = 3). We radiographed wrists from cadavers at their maximum radial and ulnar deviations, as well as at maximum flexion and extension. We took angular measurements to quantify the contribution of the mobility of the two main wrist joints (antebrachiocarpal and midcarpal) with respect to total wrist mobility. We also recorded qualitative observations. Our quantitative results show few clear differences among quadrupedal monkeys for radioulnar deviation and flexion–extension: all the primates studied exhibit a greater midcarpal mobility (approximately 54–83% of the total range of motion) than antebrachiocarpal mobility; however, we identified two patterns of carpal kinematics that show the functional impact of previously recognised morphological variations in quadrupedal monkeys. Firstly, qualitative results show that the partition that divides the proximal joint of the wrist in ceboids results in less mobility and more stability of the ulnar part of the wrist than is seen in cercopithecoids. Secondly, we show that the olive baboon specimen (Papio anubis) is characterised by limited antebrachiocarpal mobility for extension; this effect is likely the result of a radial process that projects on the scaphoid notch, as well as an intraarticular meniscus. Because of these close relationships between carpal kinematics and morphology in quadrupedal monkeys, we hypothesise that, to some extent, these functional tendencies are related to their locomotor hand postures. PMID:22050662
Hara, Yuki; Nishiura, Yasumasa; Ochiai, Naoyuki; Murai, Shinji; Yamazaki, Masashi
2017-05-01
Needle electromyography provides essential information about the functional aspects of the muscle. But little attention has been given in the literature to needle electromyography examinations in carpal tunnel syndrome. We examined the relationship between preoperative needle electromyography findings and functional recovery of the abductor pollicis brevis (APB) muscle in severe carpal tunnel syndrome patients. The subjects of this study were 49 patients, 58 hands, who fit the following 5 criteria: (1) idiopathic carpal tunnel syndrome; (2) pre-op MMT grade of the APB muscle was M0 or M1; (3) APB-CMAP (compound muscle action potential) was not evoked in a median nerve conduction study; (4) needle electromyography of the APB muscle had been done; (5) underwent carpal tunnel release only. The patients were divided into two groups according to the results of pre-op needle electromyography: voluntary motor unit potential of the APB muscle was evoked [MUP(+) group]or not [MUP(-) group]. We evaluated APB muscle strength at one year after surgery, and patient satisfaction and functional evaluations (CTSI-FS) at more than one year after. The APB muscle recovery rate to M3 or higher was 100% in the MUP(+) group, and 57% in the MUP(-) group. Patient satisfaction was also high and functional recovery was sufficient in the MUP(+) group. No patients requested a second opponensplasty. Our findings suggest that post-op restoration of thumb function relates to whether or not the MUP ofthe APB muscle is evoked. Single-stage opponensplasty may be unnecessary if the MUP of the APB muscle is; evoked. Needle electromyography is therefore useful in consideration for opponensplasty. Level Ⅲ, case-control study. Copyright © 2017. Published by Elsevier B.V.
Wong, Alison L; Martin, Janet; Tang, David; LeBlanc, Martin; Morris, Steven F; Paletz, Justin; Stein, John; Wong, Michael J; Bezuhly, Michael
2016-12-01
Written information has been thought to help patients recall surgical risks discussed during the informed consent process, but has not been assessed for carpal tunnel release, a procedure with the rare but serious risk of complex regional pain syndrome. The authors' objective was to determine whether providing a pamphlet would improve patients' ability to remember the risks of surgery. Sixty patients seen for carpal tunnel release were included in this prospective, single-blind, randomized study. Patients received either a written pamphlet of the risks of surgery or no additional information following a standardized consultation. Two weeks after the initial consultation, patients were contacted to assess their risk recall and whether they had read about the operation from any source. There was no difference in terms of the number of risks recalled between pamphlet (1.33 ± 1.21) or control groups (1.45 ± 1.22; p = 0.73). Recall of infection was better in the pamphlet group (p < 0.05). No patients remembered complex regional pain syndrome. There was no difference in the proportion of people who read additional information about carpal tunnel release surgery between the pamphlet (34.8 percent) and control groups (21.4 percent; p = 0.39), but reading about carpal tunnel release surgery was associated with improved recall (2.45 ± 1.13 versus 0.77 ± 0.91; p < 0.01). Reading about surgery improved risk recall, but providing this information in the form of a pamphlet did not, nor did it affect patients' ability to recall the risk of complex regional pain syndrome. These results demonstrate that surgeons should implement additional measures to improve comprehension of surgical risks. Therapeutic, I.
The effect of gender on foot anthropometrics in older people.
Paiva de Castro, Alessandra; Rebelatto, Jose Rubens; Aurichio, Thais Rabiatti
2011-08-01
Some questions remain regarding the anthropometric differences between the feet of young men and women, but the gap is much greater when dealing with older adults. No studies were found concerning these differences in an exclusively older adult population, which makes it difficult to manufacture shoes based on the specific anthropometric measurements of the older adult population and according to gender differences. To identify differences between the anthropometric foot variables of older men and women. Cross-sectional. 154 older women (69.0 ± 6.8 y) and 131 older men (69.0 ± 6.5 y). The foot evaluations comprised the variables of width, perimeter, height, length, 1st and 5th metatarsophalangeal angles, the Arch Index (AI), and the Foot Posture Index (FPI). A data analysis was performed using t test and a post hoc power analysis. Women showed significantly higher values for the width and perimeter of the toes, width of the metatarsal heads, and width of the heel and presented significantly lower values for the height of the dorsal foot after normalization of the data to foot length. The 1st and 5th metatarsophalangeal angles were smaller in the men. There were no differences between men and women with respect to AI and FPI. Overall, the current study shows evidence of differences between some of the anthropometric foot variables of older men and women that must be taken into account for the manufacture of shoes for older adults.
Finsterer, Josef; Stöllberger, Claudia; Sehnal, Ernst; Stanek, Gerold
2005-08-01
Long-term persistence of IgG- and IgM-antibodies against leptospira after mild leptospirosis has not been reported. In a 45-year-old female pet-shop worker with carpal tunnel syndrome, accompanied by arthralgias, coughing, repeatedly elevated temperature, followed by easy fatigability, personality change, memory and speech disturbance, blurred vision, myalgia and swollen lymph nodes, leptospirosis was diagnosed, based upon history, clinical findings, and serological investigations. After the described symptoms had disappeared following doxycyclin for 2 weeks, IgG- and IgM-antibodies against leptospira remained positive during the next three years. This case illustrates that leptospirosis may start as carpal tunnel syndrome and that the severity of leptospirosis does not seem to be related to the intensity of the humoral immune response against the causative agent.
Characterization of stem cells in Dupuytren's disease.
Hindocha, S; Iqbal, S A; Farhatullah, S; Paus, R; Bayat, A
2011-02-01
Dupuytren's disease (DD) is a common fibroproliferative disease of unknown origin. The source of abnormal cells leading to DD formation remains underexplored. In addition to fascia, palmar skin and fat-derived cells may be a potential source of cells causing DD. This study aimed to profile haematopoietic and mesenchymal stem cells in different DD tissue components compared with tissue removed at carpal tunnel surgery (control). Biopsies were taken from the diseased cord, nodule, perinodular fat and skin overlying the nodule of ten patients with DD and compared with control tissue from seven patients having surgery for carpal tunnel syndrome. Fluorescence-activated cell sorting (FACS), immunohistochemistry and quantitative real-time polymerase chain reaction (QRT-PCR) were used to identify expression of selected stem cell markers. FACS and QRT-PCR analysis identified the highest RNA expression and number of cells positive for adipocyte stem cell markers (CD13 and CD29) in the DD nodule in comparison with carpal tunnel control tissue (P = 0·053). CD34 RNA was overexpressed, and a higher percentage of these cells was present in DD skin compared with carpal tunnel skin (P = 0·001). Each structural component of DD (cord, nodule, perinodular fat and skin) had distinct stem cell populations. These findings support the hypothesis that DD may result from mesenchymal progenitor cell expansion.
Consumer health information on the Internet about carpal tunnel syndrome: indicators of accuracy.
Frické, Martin; Fallis, Don; Jones, Marci; Luszko, Gianna M
2005-02-01
To identify indicators of accuracy for consumer health information on the Internet. Several popular search engines were used to find websites on carpal tunnel syndrome. The accuracy and completeness of these sites were determined by orthopedic surgeons. It also was noted whether proposed indicators of accuracy were present. The correlation between proposed indicators of accuracy and the actual accuracy of the sites was calculated. A total of 116 websites and 29 candidate indicators were examined. A high Google toolbar rating of the main page of a site, many inlinks to the main page of a site, and an unbiased presentation of information on carpal tunnel syndrome were considered genuine indicators of accuracy. Many proposed indicators taken from published guidelines did not indicate accuracy (e.g., the author or sponsor having medical credentials). There are genuine indicators of the accuracy of health information on the Internet. Determining these indicators, and informing providers and consumers of health information about them, would be useful for public health care. Published guidelines have proposed many indicators that are obvious to unaided observation by the consumer. However, indicators that make use of the invisible link structure of the Internet are more reliable guides to accurate information on carpal tunnel syndrome.
Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population.
Oh, Yeon-Ah; Yang, Hong-So; Park, Sang-Won; Lim, Hyun-Pil; Yun, Kwi-Dug; Park, Chan
2017-04-01
The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.
An Industrial Ergonomics Bibliography: Prevention of Cumulative Trauma through Workplace Analysis
1991-12-05
12(2), 875-880. Armstrong, T. J., and Chaffin, D. B. (1979). Carpal tunnel syndrome and selected personal attributes. Journal of Occupational Medicine...syndrome: An occupational risk to the dental hygienist. Dental Hygin , a, 218-221. Beckenbaugh, R. D. (1986, Summer). Carpal tunnel syndrome. Physician’s...Orthopedic Clinics of North America, 15, 183-192. Cannon, L. J., Bernacki, E. J., and Walter, S. D. (1981). Personal and occupational factors associated with
Dorsal slab fracture of the fourth carpal bone in a racing greyhound.
Rutherford, Scott; Ness, Malcolm G
2012-11-01
To report the diagnosis and surgical management of a dorsal slab fracture of the fourth carpal bone in a racing greyhound. Clinical report. Three-year-old, male racing Greyhound. The fracture was not visible on orthogonal radiographs and the diagnosis was made by computed tomography. Open reduction and internal fixation with 2 countersunk 2.0-mm screws inserted in lag fashion was performed via a dorsal approach. Outcome was analyzed objectively by comparing preinjury and postsurgery racing performances. Internal fixation resulted in fracture healing and the dog returned to racing recording times similar to those before injury. Fractures of the fourth carpal bone may not be visible on standard orthogonal radiographic views and cross-sectional imaging may be required for more accurate identification. Surgical management was successful with the dog returning to preinjury levels of competition. © Copyright 2012 by The American College of Veterinary Surgeons.
Petazzoni, M; Nicetto, T
2014-01-01
This report describes the treatment of traumatic carpal hyperextension in a giant breed dog by pancarpal arthrodesis using a custom-made Fixin locking plate, created with the aid of a three-dimensional plastic model of the bones of the antebrachium produced by rapid prototyping technology. A three-year-old 104 kg male Mastiff dog was admitted for treatment of carpal hyperextension injury. After diagnosis of carpal instability, surgery was recommended. Computed tomography images were used to create a life-size three-dimensional plastic model of the forelimb. The model was used as the basis for constructing a customized 12-hole Fixin locking plate. The plate was used to attain successful pancarpal arthrodesis in the animal. Radiographic examination after 74 and 140 days revealed signs of osseous union of the arthrodesis. Further clinical and radiographic follow-up examination three years later did not reveal any changes in implant position or complications.
[Carpal tunnel syndrome treatment].
De Angelis, Rossella; Salaffi, Fausto; Filippucci, Emilio; Grassi, Walter
2006-01-01
Carpal tunnel syndrome, the most common peripheral neuropathy, results from compression of the median nerve at the wrist, and is a cause of pain, numbness and tingling in the upper extremities and an increasingly recognized cause of work disability. If carpal tunnel syndrome seems likely, conservative management with splinting should be initiated. Moreover, it has suggested that patients reduce activities at home and work that exacerbate symptoms. Pyridoxine and diuretics, since are largely utilised, are no more effective than placebo in relieving the symptoms. Non steroidal anti-inflammatory drugs and orally administered corticosteroids can be effective for short-term management (two to four weeks), but local corticosteroid injection may improve symptoms for a longer period. Injection is especially effective if there is no loss of sensibility or thenar-muscle atrophy and weakness, and if symptoms are intermittent rather than constant. If symptoms are refractory to conservative measures, the option of surgical therapy may be considered.
Aortic arch anomaly; Double arch; Congenital heart defect - double aortic arch; Birth defect heart - double aortic arch ... aorta is a single arch that leaves the heart and moves leftward. In double aortic arch, some ...
Torabinejad, Mahmoud; Rice, Dwight D; Maktabi, Omar; Oyoyo, Udochukwu; Abramovitch, Kenneth
2018-03-01
The purpose of this study was to determine the prevalence and size of periapical radiolucencies using cone-beam computed tomographic (CBCT) imaging in teeth without apparent signs of intraoral radiographic lesions. One hundred twenty roots from 53 patients who had been determined to have no signs of intraoral radiographic lesions were included in this study. Limited-volume CBCT scans were taken at 0.125-mm 3 voxel size. The widest area of apical radiolucency of each root canal-treated tooth was measured and assigned a numeric score based on the CBCT-Endodontic Radiolucency Index (ERI). CBCT data were evaluated by 2 radiologists with an interclass correlation coefficient of 0.96. The majority of roots (53.3%) had periodontal ligament widths ≤0.5 mm; 26.7% had radiolucency widths of 0.5 < x ≤ 1 mm, 15.0% had radiolucency widths of 1.0 < x ≤ 1.5 mm, 0.8% had radiolucency widths of 1.5 < x ≤ 2.0 mm, 1.7% had radiolucency widths of 2.0 < x ≤ 2.5 mm, and 2.5% had radiolucency widths of >2.5 mm. Patient age, recall interval, tooth type, and arch type had no statistically significant effect on the ERI distribution. Twenty percent of teeth with successful root canal treatment based on conventional periapical imaging had CBCT radiolucencies measuring greater than 1 mm. Because these radiolucencies may not be pathological changes, clinicians are cautioned against overtreatment of them before determining the true nature of these findings. Clinical studies with long follow-up times are needed to determine the proper course of actions for these cases. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.
Total number of longwall faces drops below 50
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fiscor, S.
2009-02-15
For the first time since Coal Age began its annual Longwall Census the number of faces has dropped below 50. A total of five mines operate two longwall faces. CONSOL Energy remains the leader with 12 faces. Arch Coal operates five longwall mines; Robert E. Murray owns five longwall mines. West Virginia has 13 longwalls, followed by Pennsylvania (8), Utah (6) and Alabama (6). A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries, depth of cut, model of equipment used (shearer, haulage system, roof support, facemore » conveyor, stage loader, crusher, electrical controls and voltage to face). 2 tabs., 1 photo.« less
Chen, Hui; Lowe, Alan A; de Almeida, Fernanda Riberiro; Wong, Mary; Fleetham, John A; Wang, Bangkang
2008-09-01
The aim of this study was to test a 3-dimensional (3D) computer-assisted dental model analysis system that uses selected landmarks to describe tooth movement during treatment with an oral appliance. Dental casts of 70 patients diagnosed with obstructive sleep apnea and treated with oral appliances for a mean time of 7 years 4 months were evaluated with a 3D digitizer (MicroScribe-3DX, Immersion, San Jose, Calif) compatible with the Rhinoceros modeling program (version 3.0 SR3c, Robert McNeel & Associates, Seattle, Wash). A total of 86 landmarks on each model were digitized, and 156 variables were calculated as either the linear distance between points or the distance from points to reference planes. Four study models for each patient (maxillary baseline, mandibular baseline, maxillary follow-up, and mandibular follow-up) were superimposed on 2 sets of reference points: 3 points on the palatal rugae for maxillary model superimposition, and 3 occlusal contact points for the same set of maxillary and mandibular model superimpositions. The patients were divided into 3 evaluation groups by 5 orthodontists based on the changes between baseline and follow-up study models. Digital dental measurements could be analyzed, including arch width, arch length, curve of Spee, overbite, overjet, and the anteroposterior relationship between the maxillary and mandibular arches. A method error within 0.23 mm in 14 selected variables was found for the 3D system. The statistical differences in the 3 evaluation groups verified the division criteria determined by the orthodontists. The system provides a method to record 3D measurements of study models that permits computer visualization of tooth position and movement from various perspectives.
Carpal tunnel syndrome – Part I (anatomy, physiology, etiology and diagnosis)☆☆☆
Chammas, Michel; Boretto, Jorge; Burmann, Lauren Marquardt; Ramos, Renato Matta; dos Santos Neto, Francisco Carlos; Silva, Jefferson Braga
2014-01-01
Carpal tunnel syndrome (CTS) is defined by compression of the median nerve in the wrist. It is the commonest of the compressive syndromes and its most frequent cause is idiopathic. Even though spontaneous regression is possible, the general rule is that the symptoms will worsen. The diagnosis is primarily clinical, from the symptoms and provocative tests. Electroneuromyographic examination may be recommended before the operation or in cases of occupational illnesses. PMID:26229841
Carpal tunnel syndrome: a complication of arteriovenous fistula in hemodialysis patients.
Kumar, S.; Trivedi, H. L.; Smith, E. K.
1975-01-01
Symptoms of compression of the median nerve in the carpal tunnel developed in two patients in whom an arteriovenous fistula was created to alleviate chronic renal failure through hemodialysis. Anatomic changes in the wrist area due to the fistula are probably important in the development of this syndrome, and pre-existing uremic peripheral polyneuropathy may also be important in the early development of local symptoms of nerve damage. Images FIG. 1 PMID:1201544
Isolated scaphoid dislocation associated with axial carpal dissociation: an unusual injury report.
Horton, Todd; Shin, Alexander Y; Cooney, William P
2004-11-01
We present a report of a patient with an isolated scaphoid dislocation associated with a hyperextension and axial loading injury of the carpus required a careful and extensive clinical and radiographic evaluation leading to surgical intervention to reduce and stabilize the scaphoid and to reduce and hold internally the axial carpal injury. Knowledge of the anatomy and the potential injury patterns of the carpus will aid the hand surgeon with injury recognition and proper treatment.
Carpal tunnel syndrome in women working in tea agriculture
Devrimsel, Gul; Kirbas, Serkan; Yildirim, Murat; Turkyilmaz, Aysegul Kucukali; Sahin, Nilay
2014-01-01
OBJECTIVE: The aim of this cross-sectional study was to determine the frequency of carpal tunnel syndrome (CTS) among women using tea leaf scissors and compare it with normal population. METHODS: Two hundred hands of 100 women using tea leaf scissors (tea leaf scissors group) and 112 hands of 56 healthy women (control group) were clinically and electrophysiologically evaluated for CTS. Women using tea leaf scissors were evaluated with visual analog scale (VAS) for pain and Boston Carpal Tunnel Syndrome Questionnaire for symptoms and functional status. RESULTS: Carpal tunnel syndrome was diagnosed bilaterally in 62 (62%) and unilaterally in 7 (7%) women using tea leaf scissors, whereas 2 (3.57%) bilateral and 6 (10.71%) unilateral cases of CTS was diagnosed in controls. The differences in demographic factors were not statistically significant. In women with CTS using tea leaf scissors, mean symptom severity, functional status, and VAS scores were 2.73±0.60, 2.42±0.71 and 5.19±1.84, respectively. There was statistically significant difference in the frequency of CTS between women using tea leaf scissors and the control group and the risk of having CTS among women using tea leaf scissors was approximately 12 times greater (p<0.001). CONCLUSION: In tea agriculture, working with repetitive flexions and extensions of the wrist highly increases the risk of developing CTS. PMID:28058318
Park, Dong-Jin; Kang, Ji-Hyoun; Lee, Jeong-Won; Lee, Kyung-Eun; Wen, Lihui; Kim, Tae-Jong; Park, Yong-Wook; Nam, Tai-Seung; Kim, Myung-Sun; Lee, Shin-Seok
2013-07-01
The aim of this study was to assess and validate the Korean version of the Boston Carpal Tunnel Questionnaire (K-BCTQ) in patients with carpal tunnel syndrome (CTS). After translation and cultural adaptation of the BCTQ to a Korean version, the K-BCTQ was administered to 54 patients with CTS; it was administered again after 2 weeks to assess reliability. Additionally, we administered K-DASH and EQ-5D to assess construct-validity. In a prospective study of responsiveness to clinical change, 29 of 54 patients were treated by ultrasonography-guided local corticosteroid injection therapy. The internal consistency of the K-BCTQ was high (Cronbach's alpha: 0.915) and the intra-class correlation coefficients were 0.931 for the symptom severity scale (P<0.001) and 0.844 for the functional severity scale (P<0.001). The construct-validity between the symptom severity scale and the K-DASH, and between the functional severity scale and the K-DASH were significantly correlated (both P<0.001). Clinical improvement was noted in 29 patients with injection therapy. The effect size of symptom severity was 0.67, and that of functional severity was 0.58. In conclusion, the K-BCTQ shows good reliability, construct-validity, and acceptable responsiveness after local corticosteroid injection therapy (Clinical trial number, KCT0000050).
Raeissadat, S A; Shahraeeni, S; Sedighipour, L; Vahdatpour, B
2017-10-01
A number of studies have demonstrated the neuroprotective effects of progesterone and its influence on the recovery after neural injury. Few studies investigated the efficacy of local progesterone in carpal tunnel syndrome. The objective of this study was to compare the long-term effects of progesterone vs corticosteroid local injections in patients with mild and moderate carpal tunnel syndrome. In this randomized clinical trial, 78 patients with carpal tunnel syndrome were assigned to two groups. Patients were treated with a single local injection of triamcinolone acetonide in one group and single local injection of hydroxy progesterone in the other group. Variables including pain (based on visual analogue scale), symptom severity, and functional status (based on Bostone/Levine symptom severity and functional status scale) and nerve conduction study were evaluated before and 6 months after the treatments. All outcome measures including pain and electrophysiologic findings, improved in both groups and there were no meaningful differences between two groups regarding mentioned variables except for functional outcome, which was significantly better in progesterone compared with corticosteroid group at 6-month follow-up (P=.04). The efficacy of progesterone local injection in mild and moderate CTS is equal and somehow superior to corticosteroid injection for relieving symptoms and improving functional and electrophysiologic findings at long-term follow-up. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Nakamichi, Ken-ichi; Tachibana, Shintaro; Yamamoto, Seizo; Ida, Masayoshi
2010-03-01
To compare the outcomes of percutaneous carpal tunnel release (PCTR) and mini-open carpal tunnel release (mini-OCTR) using ultrasonographic guidance for both techniques. We included 74 hands of 65 women with idiopathic carpal tunnel syndrome (age, 52-71 y; mean, 58 y). Thirty-five hands of 29 women had the PCTR (release with a device consisting of an angled blade, guide, and holder, along a line midway between the median nerve and ulnar artery (safe line) under ultrasonography (incision, 4 mm), and 39 hands of 36 women had the mini-OCTR (release along the safe line, distally under direct vision (incision, 1-1.5 cm) and proximally under ultrasonography, using a device consisting of a basket punch and outer tube. Assessments at 3, 6, 13, 26, 52, and 104 weeks showed no significant differences in neurologic recovery between the groups (p > .05). The PCTR group had significantly less pain, greater grip and key-pinch strengths, and better satisfaction scores at 3 and 6 weeks (p < .05), and less scar sensitivity at 3, 6, and 13 weeks (p < .05). There were no complications. The PCTR provides the same neurologic recovery as does the mini-OCTR. The former leads to less postoperative morbidity and earlier functional return and achievement of satisfaction. Therapeutic III. Copyright 2010. Published by Elsevier Inc.
Hahn, Katharina; Nilsson, K Peter R; Hammarström, Per; Urban, Peter; Meliss, Rolf Rüdiger; Behrens, Hans-Michael; Krüger, Sandra; Röcken, Christoph
2017-06-01
Transthyretin-derived (ATTR) amyloidosis is a frequent finding in carpal tunnel syndrome. We tested the following hypotheses: the novel fluorescent amyloid ligand heptameric formic thiophene acetic acid (h-FTAA) has a superior sensitivity for the detection of amyloid compared with Congo red-staining; Amyloid load correlates with patient gender and/or patient age. We retrieved 208 resection specimens obtained from 184 patients with ATTR amyloid in the carpal tunnel. Serial sections were stained with Congo red, h-FTAA and an antibody directed against transthyretin (TTR). Stained sections were digitalized and forwarded to computational analyses. The amount of amyloid was correlated with patient demographics. Amyloid stained intensely with h-FTAA and an anti-TTR-antibody. Congo red-staining combined with fluorescence microscopy was significantly less sensitive than h-FTAA-fluorescence and TTR-immunostaining: the highest percentage area was found in TTR-immunostained sections, followed by h-FTAA and Congo red. The Pearson correlation coefficient was .8 (Congo red vs. h-FTAA) and .9 (TTR vs. h-FTAA). Amyloid load correlated with patient gender, anatomical site and patient age. h-FTAA is a highly sensitive method to detect even small amounts of ATTR amyloid in the carpal tunnel. The staining protocol is easy and h-FTAA may be a much more sensitive procedure to detect amyloid at an earlier stage.
Diagnosis of motor fascicle compression in carpal tunnel syndrome.
Modi, C S; Ho, K; Hegde, V; Boer, R; Turner, S M
2010-06-01
Median nerve motor fascicle compression in patients with carpal tunnel syndrome is usually characterised by reduced finger grip and pinch strength, loss of thumb abduction and opposition strength and thenar atrophy. The functional outcome in patients with advanced changes may be poor due to irreversible intraneural changes. The aim of this study was to investigate patient-reported symptoms, which may enable a clinical diagnosis of median nerve motor fascicle compression to be made irrespective of the presence of advanced signs. One hundred and twelve patients (166 hands) with a clinical diagnosis of carpal tunnel syndrome were referred to the neurophysiology department and completed symptom severity questionnaires with subsequent neurophysiological testing. An increasing frequency of pain experienced by patients was significantly associated with an increased severity of median nerve motor fascicle compression with prolonged motor latencies measured in patients that described pain as a predominant symptom. An increasing frequency of paraesthesia and numbness and weakness associated with dropping objects was significantly associated with both motor and sensory involvement but not able to distinguish between them. This study suggests that patients presenting with a clinical diagnosis of carpal tunnel syndrome with pain as a frequently experienced and predominant symptom require consideration for urgent investigation and surgical treatment to prevent chronic motor fascicle compression with permanent functional deficits. Copyright 2010 Elsevier Masson SAS. All rights reserved.
Relapse of incisor crowding: a visit to the Prince of Salina.
López-Areal, Luis; Gandía, Jose-Luis
2013-03-01
The management of the retention period after comprehensive orthodontic treatment is of great importance, as a primary goal of clinician. Considerable controversy still surrounds the problem of stability after the retention period. Many studies analyze factors associated to the presence of crowding or incisor irregularity and find predictive features on its relapse. Most studies have reported little o no correlation between the treatment changes in the biological parameters - clinical, biometric (irregularity index, intermolar width, intercanine width, arch length, overjet, overbite), or cephalometric variables- that ocurred and the posttretament and postretention changes that may predict their future development. This article provides a bibliographical overview on the relapse of dental alignment in treated cases. In a brief historical introduction, the first studies on the long-term stability of orthodontic results are analysed. The article then goes on to assess studies that focus attention on anteroinferior alignment before finally studying relapse of upper crowding. It concludes by making some final comments in the light of the bibliography provided and the differents schools regarding retention needs and methods.
Meyer, Anna H; Woods, Michael G; Manton, David J
2014-03-01
This study was designed to assess the influence that the buccal corridor might have on the frontal facial attractiveness of subjects who had received orthodontic treatment with or without 4 premolar extractions. Posttreatment full-face frontal smiling photographs of 30 premolar extraction and 27 nonextraction patients were evaluated by 20 orthodontists, 20 dentists, and 20 laypeople using a visual analog scale. The ratings were analyzed according to rater group, rater sex, and number of years in practice for orthodontists and dentists to search for any statistically significant differences in the ratings on the basis of treatment groups, subject sex, and buccal corridor widths and areas. Orthodontists and dentists gave higher mean overall frontal facial attractiveness scores than did laypeople. There were no significant differences in how men and women rated the study subjects. The number of years in practice did not affect how the orthodontists rated, but it did affect the ratings of the dentists. Female subjects were consistently rated as significantly more attractive than male subjects. There was no difference in ratings for the extraction and nonextraction subject groups. The buccal corridor widths and areas did not affect the frontal facial attractiveness ratings. If treatment has been carried out with thorough diagnosis and careful planning, neither the choice of extraction or nonextraction treatment, nor the resulting buccal corridor widths or areas appeared to affect the subjects' frontal facial attractiveness. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
[Metacarpophalangeal and carpal numeric indices to calculate bone age and predict adult size].
Ebrí Torné, B; Ebrí Verde, I
2012-04-01
This work presents new numerical methods from the meta-carpal-phalangeal and carpal indexes, for calculating bone age. In addition, these new methods enable the adult height to be predicted using multiple regression equations. The longitudinal case series studied included 160 healthy children from Zaragoza, of both genders, aged between 6 months and 20 years, and studied annually, including the radiological study. For the statistical analysis the statistical package "Statistix", as well as the Excel program, was used. The new indexes are closely co-related to the chronological age, thus leading to predictive equations for the calculation of the bone age of children up to 20 years of age. In addition, it presents particular equations for up to 4 years of age, in order to optimise the diagnosis at these early ages. The resulting bones ages can be applied to numerical standard deviation tables, as well as to an equivalences chart, which directly gives us the ossification diagnosis. The predictive equations of adult height allow a reliable forecast of the future height of the studied child. These forecasts, analysed by the Student test did not show significant differences as regards the adult height that children of the case series finally achieved. The results can be obtained with a pocket calculator or through free software available for the reader. For the first time, and using a centre-developed and non-foreign methods, bones age standards and adult height predictive equations for the study of children, are presented. We invite the practitioner to use these meta-carpal-phalangeal and carpal methods in order to achieve the necessary experience to apply it to a healthy population and those with different disorders. Copyright © 2011 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.
Time course and predictors of median nerve conduction after carpal tunnel release.
Rotman, Mitchell B; Enkvetchakul, Bobby V; Megerian, J Thomas; Gozani, Shai N
2004-05-01
To identify predictors of outcome and of electrophysiologic recovery in patients with carpal tunnel syndrome (CTS) treated by endoscopic carpal tunnel release using a nerve conduction testing system (NC-Stat; NEUROMetrix, Inc, Waltham, MA). Validity of the automated nerve conduction testing system was shown by comparing presurgical distal motor latencies (DMLs) against a reference obtained by referral to an electromyography laboratory. The DML was evaluated in 48 patients with CTS. Measurements were obtained within 1 hour of surgery and at 2 weeks, 6 weeks, 3 months, and 6 months after carpal tunnel release. Presurgical and postsurgical DMLs were then compared and correlated with variables and possible predictors of outcome including age, body mass index, gender, and presurgical DMLs. The automated nerve conduction testing system DMLs matched those of reference electromyography/nerve conduction study values with high correlation. Sensitivity of the automated nerve conduction testing system when compared with a standardized CTS case definition was 89%, with a specificity of 95%. A significant correlation was found between the DML before release and the DML 1 hour after release. Moreover, maximal postsurgical DML improvement was highly dependent on the presurgical DML, with no improvement shown for the <4-ms group, mild improvement for the 4-to-6-ms group, and maximal improvement in the >6-ms group. Among the clinical variables of age, gender, and body mass index only age was mildly predictive of postrelease DML changes at 6 months. No other correlations between clinical variables and postsurgical DMLs were significant. In addition the predictive value of age was lost when combined with the presurgical DML in a multivariate analysis. Postsurgical changes in the median nerve DML were highly dependent on the prerelease latency. The sensitivity and specificity of a nerve conduction monitoring system in detecting and aiding in the diagnosis of CTS is useful in the long-term management of patients with CTS and can aid in determining the level of improvement in median nerve function after endoscopic carpal tunnel release.
Isenberg, J; Prokop, A; Schellhammer, F; Helling, H J
2002-12-01
Palmar lunate dislocation as the end stage of a perilunate dislocation is a very uncommon injury. Having treated 19,534 hospitalized patients between 1 January 1986 and 1 October 2001 the diagnosis was recorded in four male trauma patients (33, 36, 37 and 62 years old). Among the operatively treated carpal dislocations and carpal fracture dislocations those of the lunate were seen in five per cent. The dislocation was caused in by an acute hyperextension injury resulting of falls from heights in three cases, and of a motorcycle accident in a further case. In two of these cases a complete palmar lunate dislocation was analysed that were produced by fall from seven meters heights of a young craftsman and by accident of a motorcyclist. First using a longitudinal palmar approach in both cases a revision of the hemorrhagic carpal canal was performed urgently, the largely denuded lunate was reduced and the repair of identified ligamentous structures was performed by means of sutures respectively suture anchors. Reduction was stabilized with Kirschner wires. Afterwards performed computed tomography identified the result of reduction and associated defects (subluxation distal radioulnar joint). In one patient a soft tissue infection prevented the dorsal ligamentous repair. In spite of a consequent after-treatment and a good functional result a scapho-lunate dissociation was proved. An avascular defect of the lunate could be excluded by magnetic resonance imaging. In case of a secondary performed dorsal repair a persisting carpal stabilization with a satisfactory functional result could achieved. At second hand an advanced carpal collapse was proved. If reduction cannot be achieved by closed manipulation or a loss of reduction is shown, open reduction is indicated first by a palmar approach. An additional dorsal ligamentous repair seems to be necessary. Transfixation by Kirschner wires and suture anchors stabilize the restored anatomic relationships. Wrist immobilization in a cast for at least eight weeks is recommended. Although ligamentous insufficiency, osteoarthrosis and avascular necrosis are often proved, functional results are satisfactory.
Fernández-de-Las-Peñas, C; Cleland, J; Palacios-Ceña, M; Fuensalida-Novo, S; Alonso-Blanco, C; Pareja, J A; Alburquerque-Sendín, F
2017-08-01
People with carpal tunnel syndrome (CTS) exhibit widespread pressure pain and thermal pain hypersensitivity as a manifestation of central sensitization. The aim of our study was to compare the effectiveness of manual therapy versus surgery for improving pain and nociceptive gain processing in people with CTS. The trial was conducted at a local regional Hospital in Madrid, Spain from August 2014 to February 2015. In this randomized parallel-group, blinded, clinical trial, 100 women with CTS were randomly allocated to either manual therapy (n = 50), who received three sessions (once/week) of manual therapies including desensitization manoeuvres of the central nervous system, or surgical intervention (n = 50) group. Outcomes including pressure pain thresholds (PPT), thermal pain thresholds (HPT or CPT), and pain intensity which were assessed at baseline, and 3, 6, 9 and 12 months after the intervention by an assessor unaware of group assignment. Analysis was by intention to treat with mixed ANCOVAs adjusted for baseline scores. At 12 months, 95 women completed the follow-up. Patients receiving manual therapy exhibited higher increases in PPT over the carpal tunnel at 3, 6 and 9 months (all, p < 0.01) and higher decrease of pain intensity at 3 month follow-up (p < 0.001) than those receiving surgery. No significant differences were observed between groups for the remaining outcomes. Manual therapy and surgery have similar effects on decreasing widespread pressure pain sensitivity and pain intensity in women with CTS. Neither manual therapy nor surgery resulted in changes in thermal pain sensitivity. The current study found that manual therapy and surgery exhibited similar effects on decreasing widespread pressure pain sensitivity and pain intensity in women with carpal tunnel syndrome at medium- and long-term follow-ups investigating changes in nociceptive gain processing after treatment in carpal tunnel syndrome. © 2017 European Pain Federation - EFIC®.
Identification of Subgroups of Women with Carpal Tunnel Syndrome with Central Sensitization.
Fernández-de-Las-Peñas, César; Fernández-Muñoz, Juan J; Navarro-Pardo, Esperanza; da-Silva-Pocinho, Ricardo F; Ambite-Quesada, Silvia; Pareja, Juan A
2016-09-01
Identification of subjects with different sensitization mechanisms can help to identify better therapeutic strategies for carpal tunnel syndrome (CTS). The aim of the current study was to identify subgroups of women with CTS with different levels of sensitization. A total of 223 women with CTS were recruited. Self-reported variables included pain intensity, function, disability, and depression. Pressure pain thresholds (PPT) were assessed bilaterally over median, ulnar, and radial nerves, C5-C6 joint, carpal tunnel, and tibialis anterior to assess widespread pressure pain hyperalgesia. Heat (HPT) and cold (CPT) pain thresholds were also bilaterally assessed over the carpal tunnel and the thenar eminence to determine thermal pain hyperalgesia. Pinch grip force between the thumb and the remaining fingers was calculated to determine motor assessment. Subgroups were determined according to the status on a previous clinical prediction rule: PPT over the affected C5-C6 joint < 137 kPa, HPT on affected carpal tunnel <39.6ºC, and general health >66 points. The ANOVA showed that women within group 1 (positive rule, n = 60) exhibited bilateral widespread pressure hyperalgesia (P < 0.001) and bilateral thermal thresholds (P < 0.001) than those within group 2 (negative rule, n = 162). Women in group 1 also exhibited higher depression than those in group 2 (P = 0.023). No differences in self-reported variables were observed. This study showed that a clinical prediction rule originally developed for identifying women with CTS who are likely to respond favorably to manual physical therapy was able to identify women exhibiting higher widespread pressure hyper-sensitivity and thermal hyperalgesia. This subgroup of women with CTS exhibiting higher sensitization may need specific therapeutic programs. © 2016 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Case report. Pediatric carpal fracture dislocation.
DeCoster, T A; Faherty, S; Morris, A L
1994-01-01
Transcarpal fractures in children are rare in the orthopaedic literature. This is a case report of a 10-year-old boy who sustained fractures across the distal radius, scaphoid, lunate, and triquetrum with gross displacement. Treatment consisted of open reduction with internal fixation of the fractures and ligamentous repair through a combined dorsal and palmar approach. The injury healed with good wrist function but abnormal carpal development. This unusual pattern of injury is described so that it may be more readily appreciated in the future.
Yu, Yanfang; Wu, Mengjie; Chen, Xuepeng; Li, Wen
2016-11-01
A Class Il malocclusion is the most frequent sagittal skeletal disharmony presenting for orthodontic treatment. A transverse interarch discrepancy ITID) may be considered as a possible functional cause of a Class 11 relationship. The purpose of the present study was to determine transverse interarch width dimensions before and after orthodontic therapy and their possible relationship with increased mandibular projection following treatment. The sample included 40 adolescent patients who were divided into two groups, one possessing and one without a transverse discrepancy. Interarch width differences (including ICWD, IPWD, IMWD, IAWD) were measured before and after treatment, and Pogonion (Pog) to Nasion (NJ perpendicular was similarly measured in each group. The differences in arch and alveolar width dimensions between the two groups (including ICWD, IPWDI, IPWDII, IMWD, IAWD) before treatment were statistically significant (p < 0.05). A comparison of Pog to N perpendicular between the two groups showed that mandibular protrusion after treatment in the transverse discrepancy group was 2.6 ± 1.3 mm, while mandibular protrusion after treatment in the group without a transverse discrepancy was 0.6 ±0.3 mm. The statistical comparison showed that the differences were significant (p < 0.01). A transverse interarch discrepancy may have a functional relationship with mandible retrusion. If a transverse discrepancy is corrected via orthodontic treatment, the mandible may spontaneously protrude.
Aortic Arch Width and Cardiovascular Disease in Men and Women in the Community.
Chuang, Michael L; Gona, Philimon N; Qazi, Saadia; Musgrave, Rebecca M; Fox, Caroline S; Massaro, Joseph M; Hoffmann, Udo; O'Donnell, Christopher J
2018-06-16
We sought to determine whether increased aortic arch width (AAW) adds to standard Framingham risk factors and coronary artery calcium (CAC) for prediction of incident adverse cardiovascular disease (CVD) events in community-dwelling adults. A total of 3026 Framingham Heart Study Offspring and Third Generation cohort participants underwent noncontrast multidetector computed tomography from 2002 to 2005 to quantify CAC. We measured AAW as the distance between the centroids of the ascending and descending thoracic aorta, at the level of main pulmonary artery bifurcation or the right pulmonary artery. We determined sex, age group, and body size specific cut points for high (≥90th percentile) AAW from a healthy referent group (N=1471) and dichotomized AAW as high or not high across all study participants. Clinical covariates were obtained at Offspring cycle 7 (1998-2001) or Third Generation cycle 1 (2002-2005) examinations. The primary CVD outcome was a composite of myocardial infarction, coronary insufficiency, cerebrovascular accident, first hospitalization for heart failure, or CVD death. Cox proportional hazards models were used to estimate hazard ratio of high AAW on time-to-incident CVD after adjustment for Framingham risk factors and CAC. Net reclassification improvement was used to assess the effect of adding AAW to the baseline Framingham risk factor+CAC model. A total of 2826 participants (aged 51±11 years, 48% women) had complete covariates and were free of CVD at multidetector computed tomography. Over a median 8.9 years of follow-up, there were 135 incident CVD events. High AAW was independently predictive of CVD events (hazard ratio, 1.55; P =0.032) and appropriately reclassified participants at risk: net reclassification improvement, 0.31 (95% confidence interval, 0.15-0.48). AAW augments traditional CVD risk factors and CAC for prediction of incident adverse CVD events among community-dwelling adults. © 2018 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.
Changes in the palatal dimensions of mouth breathing children caused by nasal obstruction
NASA Astrophysics Data System (ADS)
Indiarti, I. S.; Setyanto, D. B.; Kusumaningrum, A.; Budiardjo, S. B.
2017-08-01
During children’s growth and development, the breathing process plays an important role in craniofacial growth, especially of the palate. Nose breathing can stimulate the lateral growth of the maxilla, thus making the palate flat. Disturbances in nose breathing caused by nasal obstruction such as allergic rhinitis, adenoid hypertrophy, rhinosinusitis, nasal polyps, and obstructive sleep apnea can lead to a mouth breathing habit in children. This habit can cause palatal dimension changes such as a narrow V-shaped maxillary arch and a high palatal vault. This study analyzed the relationship between the mouth breathing habit in children who have nasal obstruction and palatal dimension changes. A cross-sectional descriptive study was conducted with a consecutive sampling method on children 7-18 years old with a history of allergic rhinitis, adenoid hypertrophy, rhinosinusitis, nasal polyps, and obstructive sleep apnea in the Pediatric Respirology and Pediatric Immunology Allergy Outpatient Clinic Kiara Maternal and Child Health Center at Cipto Mangunkusumo Hospital in Jakarta. The palatal dimensions were measured by the height and transversal width of the hard palate of castings of each child’s upper dental arch using vernier calipers. Palatal dimension changes were found in children with a mouth breathing habit due to nasal obstruction.
Gitto, Salvatore; Messina, Carmelo; Mauri, Giovanni; Aliprandi, Alberto; Sardanelli, Francesco; Sconfienza, Luca Maria
2017-02-01
Wrist ligaments are crucial structures for the maintenance of carpal stability. They are classified into extrinsic ligaments, connecting the carpus with the forearm bones or distal radioulnar ligaments, and intrinsic ligaments, entirely situated within the carpus. Lesions of intrinsic and extrinsic ligaments of the wrist have been demonstrated to occur largely, mostly in patients with history of trauma and carpal instability, or rheumatoid arthritis. Ultrasound allows for rapid, cost-effective, non-invasive and dynamic evaluation of the wrist, and may represent a valuable diagnostic tool. Although promising results have been published, ultrasound of wrist ligaments is not performed in routine clinical practice, maybe due to its technical feasibility regarded as quite complex. This review article aims to enlighten readers about the normal sonographic appearance of intrinsic and extrinsic carpal ligaments, and describe a systematic approach for their sonographic assessment with detailed anatomic landmarks, dynamic manoeuvres and scanning technique. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Zyluk, A; Walaszek, I
2012-06-01
The Levine questionnaire is a disease-oriented instrument developed for outcome measurement of carpal tunnel syndrome (CTS) management. The objective of this study was to compare Levine scores in patients with unilateral CTS, involving the dominant or non-dominant hand, before and after carpal tunnel release. Records of 144 patients, 126 women (87%) and 18 men (13%) aged a mean of 58 years with unilateral CTS, treated operatively, were analysed. The dominant hand was involved in 100 patients (69%), the non-dominant in 44 (31%). The parameters were analysed pre-operatively, and at 1 and 6 months post-operatively. A comparison of Levine scores in patients with the involvement of the dominant or non-dominant hand showed no statistically significant differences at baseline and any of the follow-up measurements. Statistically significant differences were noted in total grip strength at baseline and at 6 month assessments and in key-pinch strength at 1 and 6 months.
Díaz-Mancha, Juan-Antonio; Castillo-López, José Manuel; Munuera-Martinez, Pedro V; Fernández-Seguín, Lourdes María; Polo-Padillo, Juan; Heredia-Rizo, Alberto Marcos
2016-01-01
The aim of the study was to assess and compare the knowledge of fourth-year medicine, physiotherapy (PT), nursing, and podiatry students in carpal and tarsal bone anatomy. A cross-sectional study was carried out. Based on a nonprobability convenience sampling, 177 fourth-year students (117 women and 60 men, mean age of 23.16 ± 3.82 years) from the podiatry (n = 39), nursing (n = 26), PT (n = 73), and medicine (n = 39) schools at a large Spanish university were included. Measurements were taken of their gross anatomy knowledge by means of the carpal and the tarsal bone tests. Students were asked to identify all carpal and tarsal bones in an illustration of the bony skeleton of both regions and were given a maximum of 5 minutes per test. Of a total of 15 bones to be labeled, the PT (11.07 ± 3.30) and podiatry (9.36 ± 2.93) students had the highest rate of correct answers compared with the medicine (6.13 ± 3.27) and nursing (4.04 ± 3.72) undergraduates. When assessing academic degrees and test scores, significant differences were observed between PT and podiatry participants vs those from the medicine and nursing schools (P < .001). Fourth-year students from the PT and podiatry programs correctly identified a higher number of carpal and tarsal bones than students from the nursing and medicine schools. Copyright © 2016. Published by Elsevier Inc.
The mini-incision technique for carpal tunnel release using nasal instruments in Chinese patients.
Chen, Yanhua; Ji, Wei; Li, Tao; Cong, Xiaobin; Chen, Zhenbing
2017-08-01
Treatment of carpal tunnel syndrome (CTS) remains a challenge for hand surgeons. Carpal tunnel release (CTR) using nasal instruments has the advantages of both endoscopy and open surgery. In this study we aimed to explore the effectiveness of CTR using nasal instruments in Chinese patients.We present a case series of 49 cases of idiopathic CTS treated with the mini-incision technique using nasal instruments. The average recovery days before return to normal work and complications were recorded. The mean grip strength, pinch strength, and sensation were evaluated. Subjective results were evaluated using the visual analogue scale (VAS), Levine Carpal Tunnel Syndrome Questionnaire (LCTSQ), Disabilities of the Arm, Shoulder, and Hand (DASH), and Medical Outcomes Study (MOS) 36-item short-form health survey (SF-36).The mean follow-up was 13 months. No return of symptoms or blood vessel injury occurred. The incidence of scar tenderness was only 8.1%, later pillar pain (after 4 weeks) was 18.4%, and average recovery time to return to normal work was 23.7 days. The mean grip strength, pinch strength, and sensation were significantly improved (P < .001). The VAS, LCTSQ, and DASH survey postoperative mean scores were lower than the preoperative scores (P < .001). SF-36 scores were significantly increased following surgery (P < .001).We conclude that the mini-incision technique for CTR using nasal instruments in Chinese patients is safe, effective, and low cost. It is worthwhile for the technique to be promoted and used.
Hsu, Hsiu-Yun; Kuo, Li-Chieh; Chiu, Haw-Yen; Jou, I-Ming; Su, Fong-Chin
2009-11-01
Patients with median nerve compression at the carpal tunnel often have poor sensory afferents. Without adequate sensory modulation control, these patients frequently exhibit clumsy performance and excessive force output in the affected hand. We analyzed precision grip function after the sensory recovery of patients with carpal tunnel syndrome (CTS) who underwent carpal tunnel release (CTR). Thirteen CTS patients were evaluated using a custom-designed pinch device and conventional sensory tools before and after CTR to measure sensibility, maximum pinch strength, and anticipated pinch force adjustments to movement-induced load fluctuations in a pinch-holding-up activity. Based on these tests, five force-related parameters and sensory measurements were used to determine improvements in pinch performance after sensory recovery. The force ratio between the exerted pinch force and maximum load force of the lifting object was used to determine pinch force coordination and to prove that CTR enabled precision motor output. The magnitude of peak pinch force indicated an economic force output during manipulations following CTR. The peak pinch force, force ratio, and percentage of maximum pinch force also demonstrated a moderate correlation with the Semmes-Weinstein test. Analysis of these tests revealed that improved sensory function helped restore patients' performance in precise pinch force control evaluations. These results suggest that sensory information plays an important role in adjusting balanced force output in dexterous manipulation. (c) 2009 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.
Simulation of Structures Exhibiting Instability Under Thermal-Mechanical Transient Loading
2015-08-25
4 2.1.4 Application to half- sine arches...shallow arches ....................................................... 9 2.2.2 Half- sine arches... sine arches, parabolic arches and cylindrical panels. 2.1 Arches with Geometric Imperfections The nonlinear equilibrium and buckling equations are
Peters, Susan; Johnston, Venerina; Hines, Sonia; Ross, Mark; Coppieters, Michel
2016-09-01
Carpal tunnel syndrome (CTS) is a common problem, that can be effectively managed by surgery. Screening for prognostic factors is important to identify workers who are at a greater risk of a poor work outcome in order to implement tailored interventions to facilitate their return-to-work. To synthesize the best available evidence on the association of preoperative prognostic factors with work-related outcomes in people who have undergone carpal tunnel surgery. Participants included those who were employed at the time of surgery, underwent carpal tunnel surgery and planned to return-to-work. The primary outcome was return-to-work. Quantitative studies investigating at least one prognostic factor for a work-related outcome in studies of workers who had carpal tunnel surgery were considered. Eleven electronic databases were searched from their respective inception date up to July 2015. A total of 3893 publications were reviewed. The quality of the included studies was assessed by two reviewers using a modified version of an appraisal tool (Joanna Briggs Institute Meta-analysis of Statistical Assessment and Review Instrument [JBI-MAStARI]). The following criteria were evaluated: study population representativeness, clearly defined prognostic factors and outcomes, potential confounding variables and appropriate statistical analysis. Data extraction was performed using a modified version of the standardized extraction tool from JBI-MAStARI. Statistical pooling was not possible. Findings are presented in tables and narrative format. Eleven studies (13 publications) investigating 93 prognostic factors for delayed return-to-work or prolonged work disability outcomes and 27 prognostic factors for work role functioning in 4187 participants were identified.Prognostic factors associated with workers' increased likelihood of an earlier return-to-work in a moderate-to-high-quality study included worker expected or desired fewer days off work, occupation, lower pain anxiety and if CTS had not altered their work role.Prognostic factors for a poorer work-related outcome included older age, lower household income, greater upper extremity functional limitation, greater than two musculoskeletal pain sites, lower recovery expectations, worse mental health status, job accommodation availability, high job strain, high job demands with high job control, poor co-worker relationships, poor baseline work role functioning, less-supportive workplace policies, preoperative work absence due to CTS or work disability of any cause, workers' compensation status, attorney involvement, and post-diagnosis surgical wait time. For workers who have had carpal tunnel surgery, there are a number of factors which may be modified in order to improve return-to-work times.
Scholz, Timo; Zech, Astrid; Wegscheider, Karl; Lezius, Susanne; Braumann, Klaus-Michael; Sehner, Susanne; Hollander, Karsten
2017-09-01
Measurement of the medial longitudinal foot arch in children is a controversial topic, as there are many different methods without a definite standard procedure. The purpose of this study was to 1) investigate intraday and interrater reliability regarding dynamic arch index and static arch height, 2) explore the correlation between both arch indices, and 3) examine the variation of the medial longitudinal arch at two different times of the day. Eighty-six children (mean ± SD age, 8.9 ± 1.9 years) participated in the study. Dynamic footprint data were captured with a pedobarographic platform. For static arch measurements, a specially constructed caliper was used to assess heel-to-toe length and dorsum height. A mixed model was established to determine reliability and variation. Reliability was found to be excellent for the static arch height index in sitting (intraday, 0.90; interrater, 0.80) and standing positions (0.88 and 0.85) and for the dynamic arch index (both 1.00). There was poor correlation between static and dynamic assessment of the medial longitudinal arch (standing dynamic arch index, r = -0.138; sitting dynamic arch index, r = -0.070). Static measurements were found to be significantly influenced by the time of day (P < .001), whereas the dynamic arch index was unchanged (P = .845). This study revealed some further important findings. The static arch height index is influenced by gender (P = .004), whereas dynamic arch index is influenced by side (P = .011) and body mass index (P < .001). Dynamic and static foot measurements are reliable for medial longitudinal foot arch assessment in children. The variation of static arch measurements during the day has to be kept in mind. For clinical purposes, static and dynamic arch data should be interpreted separately.
Coal companies invest in more longwall capacity
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fiscor, S.
2006-02-15
This year's annual survey shows not much has changed since last year. The overall population stands at 47 mines operating 53 longwalls. CONSOL Energy remains the leading US longwall operator with 13 installations, followed by Arch Coal (5), Robert E. Murray (5) and Massey Energy (4). West Virginia remains the leading longwall mining state with 14 faces in 2005, followed by Pennsylvania (8), Alabama (7), Utah (7) and Colorado (5). A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries, depth of cut, model of equipment usedmore » (shearer, haulage system, roof support, face conveyor, stage loader, crusher, electrical controls and voltage to face). 1 photos., 2 tabs.« less
Long-term results after vascularised bone graft as treatment of Kienböck disease.
Kirkeby, Lone; von Varfalva Palffy, Lena; Hansen, Torben Bæk
2014-02-01
The aim of this study was to present the long-term results in a small series of patients with Kienböck disease treated with a pedicled vascularised bone graft from the 4/5 extensor compartment of the distal radius as the only surgical treatment. In the period 2002-2006, five patients, three men and two women, mean age 41 years (22-54) were operated on using a pedicled vascularised bone graft from the 4/5 extensor compartment of the distal radius as described by Sheetz et al. Four patients were staged as Lichtman stage 2 and one as Lichtman stage 3. At the follow-up examination with radiographs and clinical examination at a mean of 7.4 years (5-9) after the operation, they all stated that they were satisfied with the operation. None of the patients had any further surgery in the observation period. Four patients were fully employed, and only one had changed employment due to his hand. The last patient was on a medical pension due to other medical causes. In all patients, no sign of progression was found of the radiological changes in the lunate and in all patients the arches of Gilula were unchanged without signs of carpal collapse. So, in this small series, a pedicled vascularised bone graft from the 4/5 extensor compartment of the distal radius as the only surgical treatment provided good long-term results in patients with stage 2 and 3 Kienböck disease.
Reddy, Jagan Mohan; Prashanti, E; Kumar, G Vinay; Suresh Sajjan, M C; Mathew, Xavier
2009-01-01
The dual-arch impression technique is convenient in that it makes the required maxillary and mandibular impressions, as well as the inter-occlusal record in one procedure. The accuracy of inter-abutment distance in dies fabricated from dual-arch impression technique remains in question because there is little information available in the literature. This study was conducted to evaluate the accuracy of inter-abutment distance in dies obtained from full arch dual-arch trays with those obtained from full arch stock metal trays. The metal dual-arch trays showed better accuracy followed by the plastic dual-arch and stock dentulous trays, respectively, though statistically insignificant. The pouring sequence did not have any effect on the inter-abutment distance statistically, though pouring the non-working side of the dual-arch impression first showed better accuracy.
Lv, Zhijin; Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang
2018-01-01
In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch's bearing capability is 1286.9 kN, and the CCC arch's ultimate bearing capability is 1072.4kN. Thus, the SQCC arch's bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering.
Williams, D S Blaise; Tierney, Robin N; Butler, Robert J
2014-01-01
Runners with high medial longitudinal arch structure demonstrate unique kinematics and kinetics that may lead to running injuries. The mobility of the midfoot as measured by the change in arch height is also suspected to play a role in lower extremity function during running. The effect of arch mobility in high-arched runners is an important factor in prescribing footwear, training, and rehabilitating the running athlete after injury. To examine the effect of medial longitudinal arch mobility on running kinematics, ground reaction forces, and loading rates in high-arched runners. Cross-sectional study. Human movement research laboratory. A total of 104 runners were screened for arch height. Runners were then identified as having high arches if the arch height index was greater than 0.5 SD above the mean. Of the runners with high arches, 11 rigid runners with the lowest arch mobility (R) were compared with 8 mobile runners with the highest arch mobility (M). Arch mobility was determined by calculating the left arch height index in all runners. Three-dimensional motion analysis of running over ground. Rearfoot and tibial angular excursions, eversion-to-tibial internal-rotation ratio, vertical ground reaction forces, and the associated loading rates. Runners with mobile arches exhibited decreased tibial internal-rotation excursion (mobile: 5.6° ± 2.3° versus rigid: 8.0° ± 3.0°), greater eversion-to-tibial internal-rotation ratio (mobile: 2.1 ± 0.8 versus rigid: 1.5 ± 0.5), decreased second peak vertical ground reaction force values (mobile: 2.3 ± 0.2 × body weight versus rigid: 2.4 ± 0.1 × body weight), and decreased vertical loading rate values (mobile: 55.7 ± 14.1 × body weight/s versus rigid: 65.9 ± 11.4 × body weight/s). Based on the results of this study, it appears that runners with high arch structure but differing arch mobility exhibited differences in select lower extremity movement patterns and forces. Future authors should investigate the impact of arch mobility on running-related injuries.
ArchE - An Architecture Design Assistant
2007-08-02
Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and
The Width of a Solar Coronal Mass Ejection and the Source of the Driving Magnetic Explosion
NASA Technical Reports Server (NTRS)
Moore, Ronald L.; Sterling, Alphonse C.; Suess, Steven T.
2007-01-01
We show that the strength of the magnetic field in the area covered by the flare arcade following a CME-producing ejective solar eruption can be estimated from the final angular width of the CME in the outer corona and the final angular width of the flare arcade. We assume (1) the flux-rope plasmoid ejected from the flare site becomes the interior of the CME plasmoid, (2) in the outer corona (R greater than 2R(sub Sun)) the CME is roughly a spherical plasmoid with legs shaped like a light bulb, and (3) beyond some height in or below the outer corona the CME plasmoid is in lateral pressure balance with the surrounding magnetic field. The strength of the nearly radial magnetic field in the outer corona is estimated from the radial component of the interplanetary magnetic field measured by Ulysses. We apply this model to three well-observed CMEs that exploded from flare regions of extremely different size and magnetic setting. One of these CMEs is an over-and-out CME that exploded from a laterally far offset compact ejective flare. In each event, the estimated source-region field strength is appropriate for the magnetic setting of the flare. This agreement (1) indicates that CMEs are propelled by the magnetic field of the CME plasmoid pushing against the surrounding magnetic field, (2) supports the magnetic-arch-blowout scenario for over-and-out CMEs, and (3) shows that a CME s final angular width in the outer corona can be estimated from the amount of magnetic flux covered by the source-region flare arcade.
Wolny, Tomasz; Saulicz, Edward; Linek, Paweł; Shacklock, Michael; Myśliwiec, Andrzej
2017-05-01
The purpose of this randomized trial was to compare the efficacy of manual therapy, including the use of neurodynamic techniques, with electrophysical modalities on patients with mild and moderate carpal tunnel syndrome (CTS). The study included 140 CTS patients who were randomly assigned to the manual therapy (MT) group, which included the use of neurodynamic techniques, functional massage, and carpal bone mobilizations techniques, or to the electrophysical modalities (EM) group, which included laser and ultrasound therapy. Nerve conduction, pain severity, symptom severity, and functional status measured by the Boston Carpal Tunnel Questionnaire were assessed before and after treatment. Therapy was conducted twice weekly and both groups received 20 therapy sessions. A baseline assessment revealed group differences in sensory conduction of the median nerve (P < .01) but not in motor conduction (P = .82). Four weeks after the last treatment procedure, nerve conduction was examined again. In the MT group, median nerve sensory conduction velocity increased by 34% and motor conduction velocity by 6% (in both cases, P < .01). There was no change in median nerve sensory and motor conduction velocities in the EM. Distal motor latency was decreased (P < .01) in both groups. A baseline assessment revealed no group differences in pain severity, symptom severity, or functional status. Immediately after therapy, analysis of variance revealed group differences in pain severity (P < .01), with a reduction in pain in both groups (MT: 290%, P < .01; EM: 47%, P < .01). There were group differences in symptom severity (P < .01) and function (P < .01) on the Boston Carpal Tunnel Questionnaire. Both groups had an improvement in functional status (MT: 47%, P < .01; EM: 9%, P < .01) and a reduction in subjective CTS symptoms (MT: 67%, P < .01; EM: 15%, P < .01). Both therapies had a positive effect on nerve conduction, pain reduction, functional status, and subjective symptoms in individuals with CTS. However, the results regarding pain reduction, subjective symptoms, and functional status were better in the MT group. Copyright © 2017. Published by Elsevier Inc.
Fernández-de-Las-Peñas, César; Cleland, Joshua A; Ortega-Santiago, Ricardo; de-la-Llave-Rincon, Ana Isabel; Martínez-Perez, Almudena; Pareja, Juan A
2010-11-01
The aim of the current study was to identify whether hyperexcitability of the central nervous system is a prognostic factor for individuals with carpal tunnel syndrome (CTS) likely to experience rapid and clinical self-reported improvement following a physical therapy program including soft tissue mobilization and nerve slider neurodynamic interventions. Women presenting with clinical and electrophysiological findings of CTS were involved in a prospective single-arm trial. Participants underwent a standardized examination and then a physical therapy session. The physical therapy sessions included both soft tissue mobilization directed at the anatomical sites of potential median nerve entrapment and a passive nerve slider neurodynamic technique targeted to the median nerve. Pressure pain thresholds (PPT) over the median, radial and ulnar nerves, C5-C6 zygapophyseal joint, carpal tunnel and tibialis anterior muscle were assessed bilaterally. Additionally, thermal detection and pain thresholds were measured over the carpal tunnel and thenar eminence bilaterally to evaluate central nervous system excitability. Subjects were classified as responders (having achieved a successful outcome) or non-responders based on self-perceived recovery. Variables were entered into a stepwise logistic regression model to determine the most accurate variables for determining prognosis. Data from 72 women were included in the analysis, of which 35 experienced a successful outcome (48.6%). Three variables including PPT over the C5-C6 joint affected side <137 kPa, HPT carpal tunnel affected side <39.6º and general health >66 points were identified. If 2 out of 3 variables were present (LR + 14.8), the likelihood of success increased from 48.6 to 93.3%. We identified 3 factors that may be associated with a rapid clinical response to both soft tissue mobilization and nerve slider neurodynamic techniques targeted to the median nerve in women presenting with CTS. Our results support that widespread central sensitization may not be present in women with CTS who are likely to achieve a successful outcome with physical therapy. Future studies are now necessary to validate these findings.
Fernández-de-Las Peñas, César; Ortega-Santiago, Ricardo; de la Llave-Rincón, Ana I; Martínez-Perez, Almudena; Fahandezh-Saddi Díaz, Homid; Martínez-Martín, Javier; Pareja, Juan A; Cuadrado-Pérez, Maria L
2015-11-01
This randomized clinical trial investigated the effectiveness of surgery compared with physical therapy consisting of manual therapies including desensitization maneuvers in carpal tunnel syndrome (CTS). The setting was a public hospital and 2 physical therapy practices in Madrid, Spain. One hundred twenty women with CTS were enrolled between February 2013 and January 2014, with 1-year follow-up completed in January 2015. Interventions consisted of 3 sessions of manual therapies including desensitization maneuvers of the central nervous system (physical therapy group, n = 60) or decompression/release of the carpal tunnel (surgical group, n = 60). The primary outcome was pain intensity (mean pain and the worst pain), and secondary outcomes included functional status and symptoms severity subscales of the Boston Carpal Tunnel Questionnaire and the self-perceived improvement. They were assessed at baseline and 1, 3, 6, and 12 months by a blinded assessor. Analysis was by intention to treat. At 12 months, 111 (92%) women completed the follow-up (55/60 physical therapy, 56/60 surgery). Adjusted analyses showed an advantage (all, P < .01) for physical therapy at 1 and 3 months in mean pain (Δ -2.0 [95% confidence interval (CI) -2.8 to -1.2]/-1.3 [95% CI -2.1 to -.6]), the worst pain (Δ -2.9 [-4.0 to -2.0]/-2.0 [-3.0 to -.9]), and function (Δ -.8 [-1.0 to -.6]/-.3 [-.5 to -.1]), respectively. Changes in pain and function were similar between the groups at 6 and 12 months. The 2 groups had similar improvements in the symptoms severity subscale of the Boston Carpal Tunnel Questionnaire at all follow-ups. In women with CTS, physical therapy may result in similar outcomes on pain and function to surgery. http://www.clinicaltrials.gov, ClinicalTrials.gov, NCT01789645. This study found that surgery and physical manual therapies including desensitization maneuvers of the central nervous system were similarly effective at medium-term and long-term follow-ups for improving pain and function but that physical therapy led to better outcomes in the short term. Copyright © 2015 American Pain Society. Published by Elsevier Inc. All rights reserved.
The effect of foot arch on plantar pressure distribution during standing.
Periyasamy, R; Anand, Sneh
2013-07-01
The aim of this study was to explore how foot type affects plantar pressure distribution during standing. In this study, 32 healthy subjects voluntarily participated and the subject feet were classified as: normal feet (n = 23), flat feet (n = 14) and high arch feet (n = 27) according to arch index (AI) values obtained from foot pressure intensity image analysis. Foot pressure intensity images were acquired by a pedopowergraph system to obtain a foot pressure distribution parameter-power ratio (PR) during standing in eight different regions of the foot. Contact area and mean PR were analysed in hind foot, mid-foot and fore foot regions. One-way analysis of variance was used to determine statistical differences between groups. The contact area and mean PR value beneath the mid-foot was significantly increased in the low arch foot when compared to the normal arch foot and high arch foot (p < 0.001) in both feet. However, subjects with low-arch feet had significantly higher body mass index (BMI) compared to subjects with high-arch feet (p < 0.05) and subjects with normal arch feet (p < 0.05) in both feet. In addition, subjects with low-arch feet had significant differences in arch index (AI) value as compared to subjects with high-arch feet (p < 0.001) and subjects with normal arch feet (p < 0.05) in both feet. Mean mid-foot PR value were positively (r = 0.54) correlated with increased arch index (AI) value. A significant (p < 0.05) change was obtained in PR value beneath the mid-foot of low arch feet when compared with other groups in both feet. The findings suggest that there is an increased mid-foot PR value in the low arch foot as compared to the normal arch foot and high arch foot during standing. Therefore, individuals with low arch feet could be at high risk for mid-foot collapse and Charcot foot problems, indicating that foot type should be assessed when determining an individual's risk for foot injury.
Sex-related shape dimorphism in the human radiocarpal and midcarpal joints.
Kivell, Tracy L; Guimont, Isabelle; Wall, Christine E
2013-01-01
Previous research has revealed significant size differences between human male and female carpal bones but it is unknown if there are significant shape differences as well. This study investigated sex-related shape variation and allometric patterns in five carpal bones that make up the radiocarpal and midcarpal joints in modern humans. We found that many aspects of carpal shape (76% of all variables quantified) were similar between males and females, despite variation in size. However, 10 of the shape ratios were significantly different between males and females, with at least one significant shape difference observed in each carpal bone. Within-sex standard major axis regressions (SMA) of the numerator (i.e., the linear variables) on the denominator (i.e., the geometric mean) for each significantly different shape ratio indicated that most linear variables scaled with positive allometry in both males and females, and that for eight of the shape ratios, sex-related shape variation is associated with statistically similar sex-specific scaling relationships. Only the length of the scaphoid body and the height of the lunate triquetrum facet showed a significantly higher SMA slope in females compared with males. These findings indicate that the significant differences in the majority of the shape ratios are a function of subtle (i.e., not statistically significant) scaling differences between males and females. There are a number of potential developmental, functional, and evolutionary factors that may cause sex-related shape differences in the human carpus. The results highlight the potential for subtle differences in scaling to result in functionally significant differences in shape. Copyright © 2012 Wiley Periodicals, Inc.
The mini-incision technique for carpal tunnel release using nasal instruments in Chinese patients
Chen, Yanhua; Ji, Wei; Li, Tao; Cong, Xiaobin; Chen, Zhenbing
2017-01-01
Abstract Treatment of carpal tunnel syndrome (CTS) remains a challenge for hand surgeons. Carpal tunnel release (CTR) using nasal instruments has the advantages of both endoscopy and open surgery. In this study we aimed to explore the effectiveness of CTR using nasal instruments in Chinese patients. We present a case series of 49 cases of idiopathic CTS treated with the mini-incision technique using nasal instruments. The average recovery days before return to normal work and complications were recorded. The mean grip strength, pinch strength, and sensation were evaluated. Subjective results were evaluated using the visual analogue scale (VAS), Levine Carpal Tunnel Syndrome Questionnaire (LCTSQ), Disabilities of the Arm, Shoulder, and Hand (DASH), and Medical Outcomes Study (MOS) 36-item short-form health survey (SF-36). The mean follow-up was 13 months. No return of symptoms or blood vessel injury occurred. The incidence of scar tenderness was only 8.1%, later pillar pain (after 4 weeks) was 18.4%, and average recovery time to return to normal work was 23.7 days. The mean grip strength, pinch strength, and sensation were significantly improved (P < .001). The VAS, LCTSQ, and DASH survey postoperative mean scores were lower than the preoperative scores (P < .001). SF-36 scores were significantly increased following surgery (P < .001). We conclude that the mini-incision technique for CTR using nasal instruments in Chinese patients is safe, effective, and low cost. It is worthwhile for the technique to be promoted and used. PMID:28767593
Complications arising from a misdiagnosed giant lipoma of the hand and palm: a case report
2011-01-01
Introduction Lipomas are benign tumors which may appear in almost any human organ. Their diagnosis rate in the hand region is not known. Case Presentation We present the case of a 63-year-old Greek Caucasian woman with a giant lipoma of the hand and palm which was not initially diagnosed. After repeated surgical decompression of the carpal tunnel the patient was referred with persisting symptoms of median and ulnar nerve compression and a prominent mass of her left palm and thenar eminence. Clinical examination, magnetic resonance imaging, nerve conduction study and biopsy, revealed a giant lipoma in the deep palmar space (8.0 × 4.0 × 3.75 cm), which was also infiltrating the carpal tunnel. She had already undergone two operations for carpal tunnel syndrome with no relief of her symptoms and she also ended up with a severed flexor pollicis longus tendon. Definitive treatment was performed by marginal resection of the lipoma and restoration of the flexor pollicis longus with an intercalated graft harvested from the palmaris longus. Thirty months after surgery the patient had a fully functional hand without any neurological deficit. Conclusion Not all lipomas of the wrist and hand are diagnosed. Our report tries to emphasize the hidden danger of lipomas in cases with carpal tunnel symptoms. The need for a high index of suspicion in conjunction with good clinical evaluation and the use of appropriate investigative studies is mandatory in order to avoid unnecessary operations and complications. Marginal excision of these tumors is restorative. PMID:22085433
Use of a splint following open carpal tunnel release: a comparative study.
Cebesoy, Oguz; Kose, Kamil Cagri; Kuru, Ilhami; Altinel, Levent; Gul, Rauf; Demirtas, Mehmet
2007-01-01
This study was undertaken to compare the clinical effectiveness and costs of postoperative splintage and late rehabilitation with a bulky bandage dressing versus early rehabilitation after carpal tunnel release. In this comparative study, 46 patients were randomly divided into 2 groups. In each group, 3 patients were excluded because of improper follow-up, leaving a total of 40 patients. Group 1 used a splint (exercises given 3 wk postoperatively) and group 2 was given a bulky bandage (exercises provided immediately) after open release. Patients were assessed preoperatively and at the first and third postoperative months with the Questionnaire of Levine for Clinical Assessment of Carpal Tunnel Syndrome. The 2 groups were similar in terms of preoperative functional status scores and in controls at the first and third months (P=.549, P=.326, P=.190). When both groups were compared, no statistical significance was found regarding symptom severity scale scores preoperatively and at the first postoperative month (P=.632 vs P=.353). At the third month, scores were lower in favor of group 2 (P=.023). Additionally, 16 of 20 patients (80%) in group 1 reported a heavy feeling and discomfort caused by the splint. This problem was not reported by the patients in group 2. The cheapest splint on the market was 9 times more expensive than a bulky dressing. The investigators concluded that postoperative immobilization with a splint has no detectable benefits. Use of bulky dressings and abandonment of the use of postoperative splints may prevent unnecessary expenditures without sacrificing patient comfort or compromising the course of healing in carpal tunnel surgery.
Further Simplification of the Simple Erosion Narrowing Score With Item Response Theory Methodology.
Oude Voshaar, Martijn A H; Schenk, Olga; Ten Klooster, Peter M; Vonkeman, Harald E; Bernelot Moens, Hein J; Boers, Maarten; van de Laar, Mart A F J
2016-08-01
To further simplify the simple erosion narrowing score (SENS) by removing scored areas that contribute the least to its measurement precision according to analysis based on item response theory (IRT) and to compare the measurement performance of the simplified version to the original. Baseline and 18-month data of the Combinatietherapie Bij Reumatoide Artritis (COBRA) trial were modeled using longitudinal IRT methodology. Measurement precision was evaluated across different levels of structural damage. SENS was further simplified by omitting the least reliably scored areas. Discriminant validity of SENS and its simplification were studied by comparing their ability to differentiate between the COBRA and sulfasalazine arms. Responsiveness was studied by comparing standardized change scores between versions. SENS data showed good fit to the IRT model. Carpal and feet joints contributed the least statistical information to both erosion and joint space narrowing scores. Omitting the joints of the foot reduced measurement precision for the erosion score in cases with below-average levels of structural damage (relative efficiency compared with the original version ranged 35-59%). Omitting the carpal joints had minimal effect on precision (relative efficiency range 77-88%). Responsiveness of a simplified SENS without carpal joints closely approximated the original version (i.e., all Δ standardized change scores were ≤0.06). Discriminant validity was also similar between versions for both the erosion score (relative efficiency = 97%) and the SENS total score (relative efficiency = 84%). Our results show that the carpal joints may be omitted from the SENS without notable repercussion for its measurement performance. © 2016, American College of Rheumatology.
Foster, Brock D; Sivasundaram, Lakshmanan; Heckmann, Nathanael; Cohen, Jeremiah R; Pannell, William C; Wang, Jeffrey C; Ghiassi, Alidad
2017-03-01
Background: Carpal tunnel release (CTR) is commonly performed for carpal tunnel syndrome once conservative treatment has failed. Operative technique and anesthetic modality vary by surgeon preference and patient factors. However, CTR practices and anesthetic trends have, to date, not been described on a nationwide scale in the United States. Methods: The PearlDiver Patient Records Database was used to search Current Procedural Terminology codes for elective CTR from 2007 to 2011. Anesthetic modality (eg, general and regional anesthesia vs local anesthesia) and surgical approach (eg, endoscopic vs open) were recorded for this patient population. Cost analysis, patient demographics, regional variation, and annual changes in CTR surgery were evaluated. Results: We identified 86 687 patients who underwent carpal tunnel surgery during this 5-year time period. In this patient sample, 80.5% of CTR procedures were performed using general or regional anesthesia, compared with 19.5% of procedures performed using local anesthesia; 83.9% of all CTR were performed in an open fashion, and 16.1% were performed using an endoscopic technique. Endoscopic surgery was on average $794 more expensive than open surgery, and general or regional anesthesia was $654 more costly than local anesthesia. Conclusions: In the United States, open CTR under local anesthesia is the most cost-effective way to perform a CTR. However, only a small fraction of elective CTR procedures are performed with this technique, representing a potential area for significant health care cost savings. In addition, regional and age variations exist in procedure and anesthetic type utilized.
A new tool for mini-open carpal tunnel release – the PSU retractor
Wongsiri, Sunton; Suwanno, Porames; Tangtrakulwanich, Boonsin; Yuenyongviwat, Varah; Wongsiri, Ekkarin
2008-01-01
Background Mini-open carpal tunnel release has become increasingly popular for the treatment of carpal tunnel surgery. The main advantages are shortening recovery time and return-to-work time. However, the risk of neurovascular injury still remains worrisome. Methods In this study, we developed a new retractor (herein called the PSU retractor) modified from the widely used Senn retractor, with the aim of decreasing the risk of neurovascular problems from normal procedure. 3-Dimensional computer design software (SolidWorks® Office Premium 2007 SP3.1) was used to construct a 3-D PSU retractor prototype. An amputated arm from a 30-year-old woman diagnosed as synovial sarcoma at the shoulder was used to test the maximal visual length. A mini-surgical incision was performed at 3 cm distal to the transverse wrist crease and a tiny flexible ruler was inserted through the tunnel beneath the skin to measure the maximal visual length. Results Our new retractor showed significantly better maximal visual length compared to the Senn retractor (47.7(8.1) mm vs. 39.2(6.5) mm). In addition, most assessors expressed a higher satisfaction rate with the PSU retractor than with the Senn retractor (7.3 (1.9) vs. 6.3 (1.1)). Conclusion In conclusion, we have developed a promising new retractor using a computer design program, which appears to be an improvement on the currently available equipment used for mini-open carpal tunnel surgery. However, further clinical studies are needed to confirm our initial findings. PMID:18808664
Diagnostic utility of F waves in clinically diagnosed patients of carpal tunnel syndrome.
Joshi, Anand G; Gargate, Ashwini R
2013-01-01
Sensory nerve conduction velocity (SNCV) of median nerve measured across the carpal tunnel, difference between distal sensory latencies (DSLs) of median and ulnar nerves and difference between distal motor latencies (DMLs) of median and ulnar nerves are commonly used nerve conduction parameters for diagnosis of carpal tunnel syndrome (CTS). These are having high degree of sensitivity and specificity. Study of median nerve F-wave minimal latency (FWML) and difference between F-wave minimal latencies (FWMLs) of median and ulnar nerves have also been reported to be useful parameters for diagnosis of CTS. However, there is controversy regarding superiority of F-wave study for diagnosis of CTS. So the aim of present study was to compare sensitivity and specificity of median FWML and difference between FWMLs of median and ulnar nerves with that of above mentioned electrophysiological parameters and to find out which parameters are having more sensitivity and specificity, for early diagnosis of CTS. Median and ulnar nerves sensory and motor conduction, median and ulnar nerves F-wave studies were carried out bilaterally in 125 clinically diagnosed patients of carpal tunnel syndrome. These parameters were also studied in 45 age matched controls. Difference between DSLs of median and ulnar nerves, median SNCV and difference between DMLs of median and ulnar nerves were having highest sensitivity and specificity while median FWML and difference between FWMLs of median and ulnar nerves was having lowest sensitivity and specificity for diagnosis of CTS. So in conclusion F-wave study is not superior parameter for diagnosis of CTS.
The role of ultrasound in the diagnosis and management of carpal tunnel syndrome: a new paradigm.
McDonagh, Cara; Alexander, Michael; Kane, David
2015-01-01
Carpal tunnel syndrome (CTS) is the most common entrapment neuropathy, affecting 9% of women, and it is responsible for significant morbidity and occupational absence. Clinical assessment is used for initial diagnosis and nerve conduction (NC) studies are currently the principal test used to confirm the diagnosis. Sensitivity of NC studies is >85% and specificity is >95%. There is now good evidence that US can be used as an alternative to NC studies to diagnose CTS. US can assess the anatomy of the median nerve and also identify pathology of the surrounding structures that may compress the nerve. Median nerve enlargement (cross-sectional area ≥10 mm(2) at the level of the pisiform bone or tunnel inlet) is the most commonly used parameter to diagnose CTS on US, and sensitivity has been reported to be as high as 97.9% using this parameter. US may also be used to guide therapeutic corticosteroid injection into the carpal tunnel--thus avoiding median nerve injury--and to objectively monitor the response to treatment. There is now sufficient evidence to propose a new paradigm for the diagnosis of CTS that incorporates US. US is proposed as the initial diagnostic test in CTS based on similar sensitivity and specificity to NC studies but higher patient acceptability, lower cost and additional capability to assess carpal tunnel anatomy and guide injection. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Ultrasound imaging of the thenar motor branch of the median nerve: a cadaveric study.
Petrover, David; Bellity, Jonathan; Vigan, Marie; Nizard, Remy; Hakime, Antoine
2017-11-01
Anatomic variations of the median nerve (MN) increase the risk of iatrogenic injury during carpal tunnel release surgery. We investigated whether high-frequency ultrasonography could identify anatomic variations of the MN and its thenar motor branch (MBMN) in the carpal tunnel. For each volar wrist of healthy non-embalmed cadavers, the type of MN variant (Lanz classification), course and orientation of the MBMN, and presence of hypertrophic muscles were scored by 18-MHz ultrasound and then by dissection. MBMN was identified by ultrasound in all 30 wrists (15 subjects). By dissection, type 1, 2 and 3 variants were found in 84%, 3%, and 13% of wrists, respectively. Ultrasound had good agreement with dissection in identifying the variant type (kappa =0.9). With both techniques, extra-, sub-, and transligamentous courses were recorded in 65%, 31%, and 4% of cases, respectively. With both techniques, the bifid nerve, hypertrophic muscles, and bilateral symmetry for variant type were identified in 13.3%, 13.3%, and 86.7% of wrists, respectively. Agreement between ultrasound and dissection was excellent for the MBMN course and orientation (kappa =1). Ultrasound can be used reliably to identify anatomic variations of the MN and MBMN. It could be a useful tool before carpal tunnel release surgery. • Ultrasound can identify variations of the motor branch of the median nerve. • Ultrasound mapping should be used prior to carpal tunnel release surgery. • All sub-, extra-, and transligamentous courses were accurately identified. • Type 3 variants (bifid nerve), hypertrophic muscles, and bilateral symmetry were accurately identified.
Powell, Douglas W; Long, Benjamin; Milner, Clare E; Zhang, Songning
2011-02-01
The functions of the medial longitudinal arch have been the focus of much research in recent years. Several studies have shown kinematic differences between high- and low-arched runners. No literature currently compares the inter-segmental foot motion of high- and low-arched recreational athletes. The purpose of this study was to examine inter-segmental foot motion in the frontal plane during dynamic loading activities in high- and low-arched female athletes. Inter-segmental foot motions were examined in 10 high- and 10 low-arched female recreational athletes. Subjects performed five barefooted trials in each of the following randomized movements: walking, running, downward stepping and landing. Three-dimensional kinematic data were recorded. High-arched athletes had smaller peak ankle eversion angles in walking, running and downward stepping than low-arched athletes. At the rear-midfoot joint high-arched athletes reached peak eversion later in walking and downward stepping than the low-arched athletes. The high-arched athletes had smaller peak mid-forefoot eversion angles in walking, running and downward stepping than the low-arched athletes. The current findings show that differences in foot kinematics between the high- and low-arched athletes were in position and not range of motion within the foot. Copyright © 2010 Elsevier B.V. All rights reserved.
[Dental arch form reverting by four-point method].
Pan, Xiao-Gang; Qian, Yu-Fen; Weng, Si-En; Feng, Qi-Ping; Yu, Quan
2008-04-01
To explore a simple method of reverting individual dental arch form template for wire bending. Individual dental arch form was reverted by four-point method. By defining central point of bracket on bilateral lower second premolar and first molar, certain individual dental arch form could be generated. The arch form generating procedure was then be developed to computer software for printing arch form. Four-point method arch form was evaluated by comparing with direct model measurement on linear and angular parameters. The accuracy and reproducibility were assessed by paired t test and concordance correlation coefficient with Medcalc 9.3 software package. The arch form by four-point method was of good accuracy and reproducibility (linear concordance correlation coefficient was 0.9909 and angular concordance correlation coefficient was 0.8419). The dental arch form reverted by four-point method could reproduce the individual dental arch form.
NASA Technical Reports Server (NTRS)
Robertson, Jeffrey
2006-01-01
This paper describes the application of the Trio-Tri-Star Carpal Wrist to the Momentum Exchange Electro-Dynamic Re-boost (MXER) tether, an advanced space transportation concept being developed by the In-Space Propulsion Technology Office at NASA s Marshall Space Flight Center in Huntsville, Alabama. Dr. Joseph Bonometti and Mr. Kirk Sorensen are the principal engineers. In the paper, a brief overview of the MXER concept is given, with an emphasis on the design problem that this wrist is designed to address. The Trio-Tri-Star Carpal Wrist, a three degree of freedom parallel manipulator, invented by Dr. Stephen J. Canfield of Tennessee Tech University, is described with an overview of wrist geometry, kinematics, and stress analysis. A working model of the wrist was assembled at MSFC using Dr. Canfield s prototype to demonstrate its operation. Finally, a design description and supporting analysis of a MXER flight concept wrist is given, with recommendations for future development work.
Jerosch-Herold, C.; Houghton, J.; Miller, L.; Shepstone, L.
2016-01-01
Despite surgery for carpal tunnel syndrome being effective in 80%–90% of cases, chronic numbness and hand disability can occur. The aim of this study was to investigate whether sensory relearning improves tactile discrimination and hand function after decompression. In a multi-centre, pragmatic, randomized, controlled trial, 104 patients were randomized to a sensory relearning (n = 52) or control (n = 52) group. A total of 93 patients completed a 12-week follow-up. Primary outcome was the shape-texture identification test at 6 weeks. Secondary outcomes were touch threshold, touch localization, dexterity and self-reported hand function. No significant group differences were seen for the primary outcome (Shape-Texture Identification) at 6 weeks or 12 weeks. Similarly, no significant group differences were observed on secondary outcomes, with the exception of self-reported hand function. A secondary complier-averaged-causal-effects analysis showed no statistically significant treatment effect on the primary outcome. Sensory relearning for tactile sensory and functional deficits after carpal tunnel decompression is not effective. Level of Evidence: II PMID:27402282
Lee, Won-Kang; Bae, Jung-Hee; Hu, Kyung-Seok; Kato, Takafumi; Kim, Seong-Taek
2017-03-01
The objective of this study was to simplify the anatomically safe and reproducible approach for BoNT injection and to generate a detailed topographic map of the important anatomical structures of the temporal region by dividing the temporalis into nine equally sized compartments. Nineteen sides of temporalis muscle were used. The topographies of the superficial temporal artery, middle temporal vein, temporalis tendon, and the temporalis muscle were evaluated. Also evaluated was the postural relations among the foregoing anatomical structures in the temporalis muscle, pivoted upon a total of nine compartments. The temporalis above the zygomatic arch exhibited an oblique quadrangular shape with rounded upper right and left corners. The distance between the anterior and posterior margins of the temporalis muscle was equal to the width of the temporalis rectangle, and the distance between the reference line and the superior temporalis margin was equal to its height. The mean ratio of width to height was 5:4. We recommend compartments Am, Mu, and Pm (coordinates of the rectangular outline) as areas in the temporal region for BoNT injection, because using these sites will avoid large blood vessels and tendons, thus improving the safety and reproducibility of the injection.
Proper shoe sizes for Thai elderly.
Chaiwanichsiri, Dootchai; Tantisiriwat, Natthiya; Janchai, Siriporn
2008-12-01
Problems from improper shoe fitting are common, but there are limited foot data for the older Thai population. To study foot dimensions and determine proper shoe sizes for Thai elderly. Healthy older people: 108 men, 105 women, aged 60-80 years, who were independent in walking, were recruited. Thirteen foot dimensions and current shoes used were measured. Side-to-side, gender difference, and correlations of main foot measurements were analyzed. About 50% women and 34% men wore too narrow shoes, and this was found to be associated with foot pain. At the same foot length (FL), men had larger foot width (FW) and toe depth. Foot width=2.39+(0.29 x FL), r=0.50, p=0.001 for women and=2.48+(0.31 x FL), r=0.56, p=0.002 for men. Arch length=1.0+(0.7 x FL), r=0.93, p=0.001 for both genders. Toe depth had constant values in all shoe sizes of each gender. Correlations of other foot parameters were reported. These anthropometric data is essential for proper shoe fitting in order to provide foot ergonomics and prevent foot problems for older Thai people.
Prasad, Mandava; Hussain, Mohammed Z.; Shetty, Sharath K.; Kumar, T. Ashok; Khaur, Mohit; George, Suja A.; Dalwai, Sameen
2013-01-01
Objective: To measure the arch width and Median mandibular flexure (MMF) values at relative rest and maximum jaw opening in young adults with Dolichofacial, Mesofacial, and Brachyfacial types and tested whether the variation in the facial pattern is related to the MMF values in South Indian population. Materials and Methods: This Prospective clinical study consisted of sample of 60 young adults. The subjects were grouped into 3 groups: Group 1: Brachyfacial, Group 2: Mesofacial and types, Group 3: Dolichofacial. Impressions were taken for all the 60 subjects and the casts were scanned and digitized. The intermolar width was measured for Dolichofacial, Mesofacial, and Brachyfacial subjects at relative rest (R) and maximum opening (O). Results: The statistical analysis of the observations included Descriptive and Inferential statistics. The statistical analysis was executed by means of Sigma graph pad prism software, USA Version-4. Kruskal wallis (ANOVA) followed by Dunns post hoc test was performed. Mann Whitney U-test was performed to assess the difference in MMF values between Males and Females of the three groups. The Mean (SD) Mandibular flexure in individuals with Brachyfacial type was 1.12 (0.09), Mesofacial type was 0.69 (0.21), and Dolichofacial type was 0.39 (0.08). Conclusions: The Mean intermolar width was maximum in Brachyfacial type and minimum in Dolichofacial type. MMF was maximum at the maximum mouth opening position and was maximum in individuals with Brachyfacial type. PMID:24082745
Kumar, Vinod; Adusumilli, Hamsini; Reddy, KM Parveen; Kumar, NH Praveen
2017-01-01
Introduction Dermatoglyphics is one of the important diagnostic tools used in the recent days for identification of an individual. Dermatoglyphics is the study of type of patterns present on digits, palms and foot. The mesiodistal diameter of the tooth is an important factor which reveals the tooth-bone discrepancy. Deciduous second molar and permanent first molar exhibit least degree of variation. Both the dermal ridges and the enamel layer of the tooth originate from ectodermal layer and during the same period of intrauterine life. Aim To determine and compare the dermatoglyphics with the mesiodistal width of the deciduous second molar and permanent first molar. Materials and Methods A sample of 120 child ranaged between 6-12 years were included in the study whose digital and palmer traits were recorded using ink method and the mesiodistal widths of the deciduous second molar and permanent first molar were recorded using a vernier caliper. The data was subjected to statistical analysis using unpaired t test. Results The ‘ATD’ angle was found in the range of 40°-50°. The loop patterns were more common followed by whorls and arch patterns. Girls expressed a greater mesiodistal diameter of deciduous second molar than boys. No significant correlation was found in between the dermatoglyphics and tooth size. Conclusion There was no significant correlation between the finger print patterns, ‘ATD’ angle and the mesiodistal diameter of the deciduous second molar and the permanent first molar. PMID:28969275
Corrales Pinzón, R; Alonso Sánchez, J M; de la Mano González, S; El Karzazi Tarazona, K
2014-01-01
Hepatocellular carcinoma is the most common primary tumor of the liver. Spreading outside the liver usually takes place in advanced stages of the disease, and bone is the third most common site of metastases. We present a case of hepatocellular carcinoma in which the first clinical manifestation was a single metastasis to the carpal bones. The interest of this case lies in the way this hepatocellular carcinoma manifested as well as in the unusual site of the metastasis. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.
Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang
2018-01-01
In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch’s bearing capability is 1286.9 kN, and the CCC arch’s ultimate bearing capability is 1072.4kN. Thus, the SQCC arch’s bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering. PMID:29447187
Runner's knowledge of their foot type: do they really know?
Hohmann, Erik; Reaburn, Peter; Imhoff, Andreas
2012-09-01
The use of correct individually selected running shoes may reduce the incidence of running injuries. However, the runner needs to be aware of their foot anatomy to ensure the "correct" footwear is chosen. The purpose of this study was to compare the individual runner's knowledge of their arch type to the arch index derived from a static footprint. We examined 92 recreational runners with a mean age of 35.4±11.4 (12-63) years. A questionnaire was used to investigate the knowledge of the runners about arch height and overpronation. A clinical examination was undertaken using defined criteria and the arch index was analysed using weight-bearing footprints. Forty-five runners (49%) identified their foot arch correctly. Eighteen of the 41 flat-arched runners (44%) identified their arch correctly. Twenty-four of the 48 normal-arched athletes (50%) identified their arch correctly. Three subjects with a high arch identified their arch correctly. Thirty-eight runners assessed themselves as overpronators; only four (11%) of these athletes were positively identified. Of the 34 athletes who did not categorize themselves as overpronators, four runners (12%) had clinical overpronation. The findings of this research suggest that runners possess poor knowledge of both their foot arch and dynamic pronation. Copyright © 2012 Elsevier Ltd. All rights reserved.
Marrocco-Trischitta, Massimiliano M; de Beaufort, Hector W; Secchi, Francesco; van Bakel, Theodorus M; Ranucci, Marco; van Herwaarden, Joost A; Moll, Frans L; Trimarchi, Santi
2017-06-01
This study assessed whether the additional use of the aortic arch classification in type I, II, and III may complement Ishimaru's aortic arch map and provide valuable information on the geometry and suitability of proximal landing zones for thoracic endovascular aortic repair. Anonymized thoracic computed tomography scans of healthy aortas were reviewed and stratified according to the aortic arch classification, and 20 of each type of arch were selected. Further processing allowed calculation of angulation and tortuosity of each proximal landing zone. Data were described indicating both proximal landing zone and type of arch (eg, 0/I). Angulation was severe (>60°) in 2/III and in 3/III. Comparisons among the types of arch showed an increase in proximal landing zones angulation (P < .001) and tortuosity (P = .009) depending on the type of arch. Comparisons within type of arch showed no change in angulation and tortuosity across proximal landing zones within type I arch (P = .349 and P = .409), and increases in angulation and tortuosity toward more distal proximal landing zones within type II (P = .003 and P = .043) and type III (P < .001 in both). The aortic arch classification is associated with a consistent geometric pattern of the aortic arch map, which identifies specific proximal landing zones with suboptimal angulation for stent graft deployment. Arches II and III also appear to have progressively less favorable anatomy for thoracic endovascular aortic repair compared with arch I. Copyright © 2016 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.
Underground coal operators install several new longwall mining systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fiscor, S.
2008-02-15
Several new names appear in the annual US Longwall Census, but the population remains the same: 52 although the number of longwall mines dropped from 40 to 47. CONSOL Energy remains the leader with 12 faces. Robert E. Murray owns 8 longwall mines followed by Arch Coal with 5 and Foundation Coal with 3. West Virginia has 13 longwalls followed by 9 in Pennsylvania, 7 in Utah and 6 in Alabama. The article describes CONSOL Energy's operations. A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries,more » depth of cut, model of equipment used (shearer, haulage system, roof support, face conveyor, stage loader, crusher, electrical controls and voltage to face). 2 tabs.« less
Segmental maxillary distraction with a novel device for closure of a wide alveolar cleft
Bousdras, Vasilios A.; Liyanage, Chandra; Mars, Michael; Ayliffe, Peter R
2014-01-01
Treatment of a wide alveolar cleft with initial application of segmental distraction osteogenesis is reported, in order to minimise cleft size prior to secondary alveolar bone grafting. The lesser maxillary segment was mobilised with osteotomy at Le Fort I level and, a novel distractor, facilitated horizontal movement of the dental/alveolar segment along the curvature of the maxillary dental arch. Following a latency period of 4 days distraction was applied for 7 days at a rate of 0.5 mm twice daily. Radiographic, ultrasonographic and clinical assessment revealed new bone and soft tissue formation 8 weeks after completion of the distraction phase. Overall the maxillary segment did move minimising the width of the cleft, which allowed successful closure with a secondary alveolar bone graft. PMID:24987601
Segmental maxillary distraction with a novel device for closure of a wide alveolar cleft.
Bousdras, Vasilios A; Liyanage, Chandra; Mars, Michael; Ayliffe, Peter R
2014-01-01
Treatment of a wide alveolar cleft with initial application of segmental distraction osteogenesis is reported, in order to minimise cleft size prior to secondary alveolar bone grafting. The lesser maxillary segment was mobilised with osteotomy at Le Fort I level and, a novel distractor, facilitated horizontal movement of the dental/alveolar segment along the curvature of the maxillary dental arch. Following a latency period of 4 days distraction was applied for 7 days at a rate of 0.5 mm twice daily. Radiographic, ultrasonographic and clinical assessment revealed new bone and soft tissue formation 8 weeks after completion of the distraction phase. Overall the maxillary segment did move minimising the width of the cleft, which allowed successful closure with a secondary alveolar bone graft.
Design of footbridge with double curvature made of UHPC
NASA Astrophysics Data System (ADS)
Kněž, P.; Tej, P.; Čítek, D.; Kolísko, J.
2017-09-01
This paper presents design of footbridge with double curvature made of UHPC. The structure is designed as a single-span bridge. The span of the bridge is 10.00 m, and the width of the deck is 1.50 m. The thickness of shell structure is 0.03 m for walls and 0.045 m for deck. The main structure of the bridge is one arch shell structure with sidewalls made of UHPC with dispersed steel fibers with conventional reinforcement only at anchoring areas. The structure was designed on the basis of the numerical model. Model was subsequently clarified on the basis of the first test elements. Paper presents detailed course on design of the bridge and presentation will contain also installation in landscape and results of static and dynamic loading tests.
The Foot's Arch and the Energetics of Human Locomotion.
Stearne, Sarah M; McDonald, Kirsty A; Alderson, Jacqueline A; North, Ian; Oxnard, Charles E; Rubenson, Jonas
2016-01-19
The energy-sparing spring theory of the foot's arch has become central to interpretations of the foot's mechanical function and evolution. Using a novel insole technique that restricted compression of the foot's longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms(-1)) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running.
The biomechanics of zygomatic arch shape
Smith, Amanda L.; Grosse, Ian R.
2017-01-01
Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. PMID:27870343
Anatomical and morphological study of the subcoracoacromial canal.
Le Reun, O; Lebhar, J; Mateos, F; Voisin, J L; Thomazeau, H; Ropars, M
2016-12-01
Many clinical anatomy studies have looked into how variations in the acromion, coracoacromial ligament (CAL) and subacromial space are associated with rotator cuff injuries. However, no study up to now had defined anatomically the fibro-osseous canal that confines the supraspinatus muscle in the subcoracoacromial space. Through an anatomical study of the scapula, we defined the bone-related parameters of this canal and its anatomical variations. This study on dry bones involved 71 scapulas. With standardised photographs in two orthogonal views (superior and lateral), the surface area of the subcoracoacromial canal and the anatomical parameters making up this canal were defined and measured using image analysis software. The primary analysis evaluated the anatomical parameters of the canal as a function of three canal surface area groups; the secondary analysis looked into how variations in the canal surface area were related to the type of acromion according to the Bigliani classification. Relative to glenoid width, the group with a large canal surface area (L) had significantly less lateral overhang of the acromion than the group with a small canal surface area (S), with ratios of 0.41±0.23 and 0.58±0.3, respectively (P=0.04). The mean length of the CAL was 46±8mm in the L group and 39±9mm in the S group (P=0.003). The coracoacromial arch angle was 38°±11° in the L group and 34°±9° in the S group; the canal surface area was smaller in specimens with a smaller coracoacromial arch angle (P=0.20). Apart from acromial morphology, there could be innate anatomical features of the scapula that predispose people to extrinsic lesions to the supraspinatus tendon (lateral overhang, coracoacromial arch angle) by reducing the subcoracoacromial canal's surface area. Anatomical descriptive study. Copyright © 2016 Elsevier Masson SAS. All rights reserved.
Pellicer-Chover, Hilario; Peñarrocha-Oltra, David; Bagán, Leticia; Fichy-Fernandez, Antonio J.; Canullo, Luigi
2014-01-01
Purpose: To evaluate and compare peri-implant health, marginal bone loss and success of immediate and delayed implant placement for rehabilitation with full-arch fixed prostheses. Material and Methods: The present study was a prospective, randomized, single-blind, clinical preliminary trial. Patients were randomized into two treatment groups. In Group A implants were placed immediately post-extraction and in Group B six months after extraction. The following control time-points were established: one week, six months and twelve months after loading. Measurements were taken of peri-implant crevicular fluid volume, plaque index, gingival retraction, keratinized mucosa, probing depth, modified gingival index and presence of mucositis. Implant success rates were evaluated for the two groups. The study sample included fifteen patients (nine women and six men) with a mean average age of 63.7 years. One hundred and forty-four implants were placed: 76 placed in healed sites and 68 placed immediately. Results: At the moment of prosthetic loading, keratinized mucosa width and probing depth were higher in immediate implants than delayed implants, with statistically significant differences. However, after six and twelve months, differences between groups had disappeared. Bone loss was 0.54 ± 0.39 mm for immediate implants and 0.66 ± 0.25 mm for delayed implants (p=0.201). No implants failed in either group. Conclusions: The present study with a short follow-up and a small sample yielded no statistically significant differences in implant success and peri-implant marginal bone loss between immediate and delayed implants with fixed full-arch prostheses. Peri-implant health showed no statistically significant differences for any of the studied parameters (crevicular fluid volume, plaque index, gingival retraction, keratinized mucosa, probing depth, modified gingival index and presence of mucositis) at the twelve-month follow-up. Key words:Immediate implants, delayed implants, peri-implant health, success rate. PMID:24316712
Roh, Young Hak; Koh, Young Do; Kim, Jong Oh; Noh, Jung Ho; Gong, Hyun Sik; Baek, Goo Hyun
2018-04-01
Health literacy is the ability to obtain, process, and understand health information needed to make appropriate health decisions. The proper comprehension by patients regarding a given disease, its treatment, and the physician's instructions plays an important role in shared decision-making. Studies have disagreed over the degree to which differences in health literacy affect patients' preferences for shared decision-making; we therefore sought to evaluate this in the context of shared decision-making about carpal tunnel release. (1) Do patients with limited health literacy have different preferences of shared decision-making for carpal tunnel release than those with greater levels of health literacy? (2) How do patients with limited health literacy retrospectively perceive their role in shared decision-making after carpal tunnel release? Over a 32-month period, one surgeon surgically treated 149 patients for carpal tunnel syndrome. Patients were eligible if they had cognitive and language function to provide informed consent and complete a self-reported questionnaire and were not eligible if they had nerve entrapment other than carpal tunnel release or had workers compensation issues; based on those, 140 (94%) were approached for study. Of those, seven (5%) were lost to followup before 6 months, leaving 133 for analysis here. Their mean age was 55 years (range, 31-76 years), and 83% (111 of 133) were women. Thirty-three percent (44 of 133) of patients had less than a high school education. Health literacy was measured according to the Newest Vital Sign during the initial visit, and a score of ≤ 3 was considered limited health literacy. Forty-four percent of patients had limited health literacy. The Control Preferences Scale was used for patients to indicate their preferred role in surgical decision-making preoperatively and to assess their perceived level of involvement postoperatively. Bivariate and multivariable analyses were performed to determine whether patients' clinical, demographic, and health literacy factors accounted for the preoperative preferences and postoperative assessments of their role in shared decision-making. A total of 133 patients would provide 94% power for a medium effect size for linear regression with five main predictors. We found no differences between patients with lower levels of health literacy and those with greater health literacy in terms of preferences of shared decision-making for carpal tunnel release (3.0 ± 1.6 versus 2.7 ± 1.4; mean difference, 0.3; 95% confidence interval, -0.2 to 0.8; p = 0.25). A history of surgical procedures (coefficient = -0.32, p < 0.01) and a lower Disabilities of the Arm, Shoulder and Hand score (coefficient = 0.17, p = 0.02) were independently associated with a preference for an active role in shared decision-making. However, patients with limited health literacy (coefficient = -0.31, p = 0.01) and an absence of a caregiver (coefficient = -0.28, p = 0.03) perceived a more passive role in actual decision-making. Physicians should be aware of the discrepancy between preferences and perceptions of shared decision-making among patients with limited health literacy, and physicians should consider providing a decision aid tailored to basic levels of health literacy to help patients achieve their preferred role in decision-making. Level II, prognostic study.
Best surgical option for arch extension of type B aortic dissection: the open approach
Kim, Joon Bum
2014-01-01
Arch extension of aortic dissection (AD) is reported to occur in 4-25% of patients presenting with acute type B AD. The DeBakey and Stanford classifications do not specifically account for this subset, however, recent studies have demonstrated that the prognosis of patients with arch extension in acute type B AD is virtually identical to that of others with type B AD. In this sense, it seems reasonable to extend the general management principles that are applied to classic acute type B AD even to patients with arch extension. This may be because even in patients with arch extension, most complications occur at locations distal to the arch, and therefore treatment of these patients is similar to that of complicated type B AD, namely thoracic endovascular aortic repair (TEVAR). Conversely, 10% of patients with acute type B AD and arch extension develop complications that are directly related to the arch pathology. This clinical scenario generally necessitates surgical arch repair through a sternotomy approach. The frozen elephant trunk technique combined with arch repair is a very reasonable option to treat this unique clinical entity that involves relatively distal locations of the aortic diseases. Combined arch and descending aorta replacement through thoracotomy is an alternative option particularly when the anatomical features of the target lesions are not suitable for a sternotomy approach or TEVAR. Nonetheless, the reported mortality associated with this approach has been exceedingly high. Hybrid arch repair is another consideration in treating these patients to reduce the treatment-related mortality and morbidity, especially when the arch pathology is limited to the distal part. Nevertheless, the safety and efficacy of this procedure in cases with more extensive arch involvement needs to be assessed in further studies in comparison with other treatment modalities. PMID:25133105
Tang, Lin-Feng; Ju, Ji-Hui; Liu, Yue-Fei; Lan, Bo; Hou, Rui-Xing
2018-02-01
To investigate blood supply features of the flap based on the plantar digital artery arch and arch branch artery, and the treatment of outcomes of reconstructed fingers by the plantar digital artery arch branch island flap. Eight fresh foot specimens were employed with red emulsion infusion and microdissection. The vascular organization was observed in the second toe, such as initiation site, the course, and the number of the plantar digital artery arch branch. There were 15 fingers of 13 patients (8 males and 5 females) with finger defects accompanied by toe transfer, using the plantar digital artery arch branch flap inserted in the neck of the second toe to correct the appearance defect caused by a narrow "neck" and a bulbous tip. The intact plantar digital arches were identified in all specimens. The plantar digital artery arch had 5 branches. The range of external diameter of the arch branch was 0.4-0.6 mm. All the plantar digital artery arch branch island flaps and the reconstructed fingers survived. These cases were conducted with a follow-up period for 3-18 months (average, 9 months). All the plantar digital artery arch branch island flaps and reconstructed fingers demonstrated a satisfactory appearance and favorable sense function. The reconstructed finger-tip characteristic was good, with no obvious scar hyperplasia. The range of flexion and extension of reconstructed fingers was favorable as well. The plantar digital artery arch and arch branch artery possess regular vasa vasorum and abundant vascularity. A flap based on the plantar digital artery arch branch is an ideal selection for plastic surgery of reconstructed fingers. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Heritability estimates of dental arch parameters in Lithuanian twins.
Švalkauskienė, Vilma; Šmigelskas, Kastytis; Šalomskienė, Loreta; Andriuškevičiūtė, Irena; Šalomskienė, Aurelija; Vasiliauskas, Arūnas; Šidlauskas, Antanas
2015-01-01
The genetic influence on dental arch morphology may be country-specific, thus it is reasonable to check the estimates of genetics across different populations. The purpose of this study was to evaluate the heredity of dental arch morphology in the sample of Lithuanian twins with accurate zygosity determination. The study sample consisted of digital dental models of 40 monozygotic (MZ) and 32 dizygotic (DZ) twin pairs. The estimates of heritability (h(2)) for dental arch breadth and length were calculated. All dental arch breadths and lengths were statistically significantly larger in men than in women. Arch length differences between genders were less expressed than largest breadth differences. In the upper jaw the largest genetic effect was found on the arch breadth between lateral incisors. The heritability of dental arch length demonstrated similar differences between upper and lower jaw with mandible dental arch length being more genetically determined. The largest genetic impact was found on the upper dental arch breadth between lateral incisors. Similar, but lower heritability is inherent for canines and first premolars of the upper jaw and first premolars of the lower jaw. It also can be noted, that arch breadths between posterior teeth show lower heritability estimates than between anterior teeth on both jaws. The dental arch in the upper jaw has more expressed genetic component than in the lower jaw.
Arch index and running biomechanics in children aged 10-14 years.
Hollander, Karsten; Stebbins, Julie; Albertsen, Inke Marie; Hamacher, Daniel; Babin, Kornelia; Hacke, Claudia; Zech, Astrid
2018-03-01
While altered foot arch characteristics (high or low) are frequently assumed to influence lower limb biomechanics and are suspected to be a contributing factor for injuries, the association between arch characteristics and lower limb running biomechanics in children is unclear. Therefore, the aim of this study was to investigate the relationship between a dynamically measured arch index and running biomechanics in healthy children. One hundred and one children aged 10-14 years were included in this study and underwent a biomechanical investigation. Plantar distribution (Novel, Emed) was used to determine the dynamic arch index and 3D motion capture (Vicon) to measure running biomechanics. Linear mixed models were established to determine the association between dynamic arch index and foot strike patterns, running kinematics, kinetics and temporal-spatial outcomes. No association was found between dynamic arch index and rate of rearfoot strikes (p = 0.072). Of all secondary outcomes, only the foot progression angle was associated with the dynamic arch index (p = 0.032) with greater external rotation in lower arched children. Overall, we found only few associations between arch characteristics and running biomechanics in children. However, altered foot arch characteristics are of clinical interest. Future studies should focus on detailed foot biomechanics and include clinically diagnosed high and low arched children. Copyright © 2018 Elsevier B.V. All rights reserved.
Recurrent postoperative CRPS I in patients with abnormal preoperative sympathetic function.
Ackerman, William E; Ahmad, Mahmood
2008-02-01
A complex regional pain syndrome of an extremity that has previously resolved can recur after repeat surgery at the same anatomic site. Complex regional pain syndrome is described as a disease of the autonomic nervous system. The purpose of this study was to evaluate preoperative and postoperative sympathetic function and the recurrence of complex regional pain syndrome type I (CRPS I) in patients after repeat carpal tunnel surgery. Thirty-four patients who developed CRPS I after initial carpal tunnel releases and required repeat open carpal tunnel surgeries were studied. Laser Doppler imaging (LDI) was used to assess preoperative sympathetic function 5-7 days prior to surgery and to assess postoperative sympathetic function 19-22 days after surgery or 20-22 days after resolution of the CRPS I. Sympathetic nervous system function was prospectively examined by testing reflex-evoked vasoconstrictor responses to sympathetic stimuli recorded with LDI of both hands. Patients were assigned to 1 of 2 groups based on LDI responses to sympathetic provocation. Group I (11 of 34) patients had abnormal preoperative LDI studies in the hands that had prior surgeries, whereas group II (23 of 34) patients had normal LDI studies. Each patient in this study had open repeat carpal tunnel surgery. In group I, 8 of 11 patients had recurrent CRPS I, whereas in group II, 3 of 23 patients had recurrent CRPS I. All of the recurrent CRPS I patients were successfully treated with sympathetic blockade, occupational therapy, and pharmacologic modalities. Repeat LDI after recurrent CRPS I resolution was abnormal in 8 of 8 group I patients and in 1 of 3 group II patients. CRPS I can recur after repeat hand surgery. Our study results may, however, identify those individuals who may readily benefit from perioperative therapies. Prognostic I.
2012-01-01
Background Few prospective cohort studies of distal upper extremity musculoskeletal disorders have been performed. Past studies have provided somewhat conflicting evidence for occupational risk factors and have largely reported data without adjustments for many personal and psychosocial factors. Methods/design A multi-center prospective cohort study was incepted to quantify risk factors for distal upper extremity musculoskeletal disorders and potentially develop improved methods for analyzing jobs. Disorders to analyze included carpal tunnel syndrome, lateral epicondylalgia, medial epicondylalgia, trigger digit, deQuervain’s stenosing tenosynovitis and other tendinoses. Workers have thus far been enrolled from 17 different employment settings in 3 diverse US states and performed widely varying work. At baseline, workers undergo laptop administered questionnaires, structured interviews, two standardized physical examinations and nerve conduction studies to ascertain demographic, medical history, psychosocial factors and current musculoskeletal disorders. All workers’ jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of musculoskeletal disorders. Repeat nerve conduction studies are performed for those with symptoms of tingling and numbness in the prior six months. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. Case definitions have been established. Point prevalence of carpal tunnel syndrome is a combination of paraesthesias in at least two median nerve-served digits plus an abnormal nerve conduction study at baseline. The lifetime cumulative incidence of carpal tunnel syndrome will also include those with a past history of carpal tunnel syndrome. Incident cases will exclude those with either a past history or prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression. Discussion A prospective cohort study of distal upper extremity musculoskeletal disorders is underway and has successfully enrolled over 1,000 workers to date. PMID:22672216
Michalsen, Andreas; Bock, Silke; Lüdtke, Rainer; Rampp, Thomas; Baecker, Marcus; Bachmann, Jürgen; Langhorst, Jost; Musial, Frauke; Dobos, Gustav J
2009-06-01
We investigated the effectiveness of cupping, a traditional method of treating musculoskeletal pain, in patients with carpal tunnel syndrome (CTS) in an open randomized trial. n = 52 outpatients (58.5 +/- 8.0 years) with neurologically confirmed CTS were randomly assigned to either a verum (n = 26) or a control group (n = 26). Verum patients were treated with a single application of wet cupping, and control patients with a single local application of heat within the region overlying the trapezius muscle. Patients were followed up on day 7 after treatment. The primary outcome, severity of CTS symptoms (VAS), was reduced from 61.5 +/- 20.5 to 24.6 +/- 22.7 mm at day 7 in the cupping group and from 67.1 +/- 20.2 to 51.7 +/- 23.9 mm in the control group [group difference -24.5mm (95%CI -36.1; -2.9, P < .001)]. Significant treatment effects were also found for the Levine CTS-score (-.6 pts: 95%CI -.9; -.2, P = .002), neck pain (-12.6mm; 95%CI -18.8; -6.4, P < .001), functional disability (DASH-Score) (-11.1 pts; 95%CI -17.1; -5.1, P < .001), and physical quality of life (.3; 95%CI .0; .3, P = .048). The treatment was safe and well tolerated. We conclude that cupping therapy may be effective in relieving the pain and other symptoms related to CTS. The efficacy of cupping in the long-term management of CTS and related mechanisms remains to be clarified. The results of a randomized trial on the clinical effects of traditional cupping therapy in patients with carpal tunnel syndrome are presented. Cupping of segmentally related shoulder zones appears to alleviate the symptoms of carpal tunnel syndrome.
Clinical Utility of Dual-Energy CT Analysis of Bone Marrow Edema in Acute Wrist Fractures.
Ali, Ismail T; Wong, William D; Liang, Teresa; Khosa, Faisal; Mian, Memoona; Jalal, Sabeena; Nicolaou, Savvas
2018-04-01
The purpose of this study is to determine the utility of dual-energy CT (DECT) for assessing carpal fractures and to obtain an attenuation value cutoff (in Hounsfield units) to identify bone marrow edema due to an acute carpal fracture. In this retrospective study, 24 patients who presented with wrist fractures from September 3, 2014, through March 9, 2015, underwent imaging with DECT (80 and 140 kVp). Using the three-material decomposition algorithm specific for virtual noncalcium to construct images, two radiologists identified carpal fractures and associated bone marrow edema. Readers noted the attenuation at areas with and without bone marrow edema. The cutoff value was obtained by ROC analysis and was internally validated on 13 separate patients with suspected wrist fractures. A p < 0.05 was considered statistically significant. CT attenuation was significantly higher in areas of bone marrow edema than in areas without it (p < 0.0001, t test). A cutoff of 5.90 HU allows detection of bone marrow edema associated with acute wrist fractures with 100% sensitivity and 99.5% specificity, compared with visual DECT interpretation. In the 13 validation cases, the cutoff of 5.90 HU identified bone marrow edema with 100% accuracy, compared with visual interpretation. Kappa values were 0.83 between the two readings by reader 1, and 0.73 and 0.96 comparing the two readings of reader 1 with the reading by reader 2. DECT is a useful tool for identifying bone marrow edema in the setting of acute wrist fractures, providing an alternative to MRI. A cutoff value of 5.90 HU can be used for accurate diagnosis and exclusion of carpal fractures.
Garg, Arun; Hegmann, Kurt T; Wertsch, Jacqueline J; Kapellusch, Jay; Thiese, Matthew S; Bloswick, Donald; Merryweather, Andrew; Sesek, Richard; Deckow-Schaefer, Gwen; Foster, James; Wood, Eric; Kendall, Richard; Sheng, Xiaoming; Holubkov, Richard
2012-06-06
Few prospective cohort studies of distal upper extremity musculoskeletal disorders have been performed. Past studies have provided somewhat conflicting evidence for occupational risk factors and have largely reported data without adjustments for many personal and psychosocial factors. A multi-center prospective cohort study was incepted to quantify risk factors for distal upper extremity musculoskeletal disorders and potentially develop improved methods for analyzing jobs. Disorders to analyze included carpal tunnel syndrome, lateral epicondylalgia, medial epicondylalgia, trigger digit, deQuervain's stenosing tenosynovitis and other tendinoses. Workers have thus far been enrolled from 17 different employment settings in 3 diverse US states and performed widely varying work. At baseline, workers undergo laptop administered questionnaires, structured interviews, two standardized physical examinations and nerve conduction studies to ascertain demographic, medical history, psychosocial factors and current musculoskeletal disorders. All workers' jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of musculoskeletal disorders. Repeat nerve conduction studies are performed for those with symptoms of tingling and numbness in the prior six months. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. Case definitions have been established. Point prevalence of carpal tunnel syndrome is a combination of paraesthesias in at least two median nerve-served digits plus an abnormal nerve conduction study at baseline. The lifetime cumulative incidence of carpal tunnel syndrome will also include those with a past history of carpal tunnel syndrome. Incident cases will exclude those with either a past history or prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression. A prospective cohort study of distal upper extremity musculoskeletal disorders is underway and has successfully enrolled over 1,000 workers to date.
Kaur, Manraj N.; Tolliver, Tyson; Longo, Christopher J.; Naam, Nash H.; Thoma, Achilles
2017-01-01
Purpose: Canadian health care is often criticized for extended wait times, whereas the United States suffers from increased costs. The purpose of this pilot study was to determine the cost-utility of open carpal tunnel release in Canada versus the United States. Methods: A prospective cohort study evaluated patients undergoing open carpal tunnel release at an institution in Canada and the United States. All costs from a societal perspective were captured. Utility was measured using validated health-related quality of life (HRQOL) scales—the EuroQol-5D and the Michigan Hand Outcome Questionnaire. Results: Twenty-one patients at the Canadian site and 8 patients at the US site participated. Mean total costs were US $1581 ± $1965 and $2179 (range: $1421-$2741) at the Canadian and US sites, respectively. Health-related quality of life demonstrated significant improvements following surgery (P < .05). Patient utilities preoperatively and at 6 weeks and 3 months postoperatively were 0.72 ± 0.20, 0.86 ± 0.11, and 0.83 ± 0.16 at the Canadian site and 0.81 ± 0.09, 0.86 ± 0.10, and 0.86 ± 0.12 at the US site. Improvements in HRQOL directly related to surgery were not significantly different between patients in Canada and the United States. American patients, however, attained improved HRQOL sooner due to shorter wait times (27 ± 10 vs 214 ± 119 days; P < .001). The incremental cost-utility of the US system was $7758/quality-adjusted life year gained compared to the Canadian system. Sensitivity analyses confirmed that these results were robust. Conclusion: This pilot study suggests that carpal tunnel surgery is more cost-effective in the United States due to prolonged wait times in Canada. PMID:29026806
Dimitrios, Stasinopoulos; Stasinopoulos, Loannis
2017-12-31
The aim of this trial was to assess the efficacy of polarized polychromatic noncoherent light (Bioptron light) in the treatment of Carpal Tunnel Syndrome (CTS) in pregnancy. An uncontrolled experimental study was conducted in pregnant patients with CTS who visited our clinic from January 2006 to January 2010. Bioptron light (480-3400 nm; 95% polarization; 40 mW/cm 2 ; and 2.4 J/cm 2 ) was administered perpendicular to the carpal tunnel area. The irradiation time for each session was 6 min at an operating distance of 5-10 cm from the carpal tunnel area, twice each day, five days per week for 2 weeks. Pain and paraesthesia using a visual analogue scale (VAS) and finger pinch strength were evaluated at the end of treatment (week 2) and 1-month (week 6) after the end of treatment. The Student'sttest was used and p values < 0.05 were accepted as statistically significant. 46 patients participated in the study. The mean age of subjects was 27.6 years (range 22-37). The patient population had a mean duration of CTS of 2.3 months (range 1-4). All patients were in the third trimester. Pain and paraesthesia decreased at the end of treatment and at the 1-month follow-up, whereas the finger pinch strength increased at the end of treatment and at the 1-month follow-up. In conclusion, the results of the present study suggest that Bioptron light is a reliable, safe, and effective treatment option in pregnant patients with CTS. Controlled clinical trials are needed to establish the absolute and relative effectiveness of this intervention.
Static Magnetic Field Therapy for Carpal Tunnel Syndrome: A Feasibility Study
Colbert, Agatha P.; Markov, Marko S.; Carlson, Nels; Gregory, William L.; Carlson, Hans; Elmer, Patricia J.
2010-01-01
Objectives To assess the feasibility of conducting trials of static magnetic field (SMF) therapy for carpal tunnel syndrome (CTS), to collect preliminary data on the effectiveness of two SMF dosages and to explore the influence of a SMF on median nerve conduction. Design Randomized, double blind, sham controlled trial with 6-week intervention and 12-week follow-up. Setting University hospital outpatient clinics Participants Women and men (N=60), ages 21–65, with electrophysiologically-confirmed CTS diagnosis, recruited from the general population. Interventions Participants wore nightly either neodymium magnets that delivered either 15 or 45mTesla (mT) to the contents of the carpal canal, or a non-magnetic disk. Main Outcome Measures Symptom Severity Scale (SSS) and Function Severity Scale (FSS) of the Boston Carpal Tunnel Questionnaire (BCTQ) and 4 median nerve parameters: sensory distal latency, sensory nerve action potential amplitude, motor distal latency and compound motor action potential amplitude). Results 58 of 60 randomized participants completed the study. There were no significant between-group differences for change in the primary endpoint SSS or for FSS or median nerve conduction parameters. For the SSS and the FSS each group showed a reduction at 6-weeks indicating improvement in symptoms. Conclusions This study demonstrated the feasibility and safety of testing SMF therapy for CTS. There were no between-group differences observed for the BCTQ or median nerve parameters following 6 weeks of SMF therapy. Significant within-group, symptomatic improvements of the same magnitude were experienced by participants in both active and sham magnet groups. Future studies are needed to optimize SMF dosimetry and resolve issues related to the use of sham controls in SMF trials. PMID:20599049
DOE Office of Scientific and Technical Information (OSTI.GOV)
McKeown, F.A.; Diehl, S.F.; Glick, E.E.
1990-11-01
Most of the earthquakes in the New Madrid seismic zone correlate spatially with the Blytheville arch and part of the Pascoal arch, which are interpreted to be the same structure. Both arches may have formed by diapirism along the axis of the Reelfoot rift. Seismic, geophysical, and drill-hole data indicate that the rocks in the arches are highly deformed and fractured and have gross lithologic properties that make them weaker than rocks adjacent to the arches. The weaker rocks are inferred to fail seismically more readily than the stronger rocks adjacent to the arches.
The Biomechanics of Zygomatic Arch Shape.
Smith, Amanda L; Grosse, Ian R
2016-12-01
Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. Anat Rec, 299:1734-1752, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.
The Foot’s Arch and the Energetics of Human Locomotion
Stearne, Sarah M.; McDonald, Kirsty A.; Alderson, Jacqueline A.; North, Ian; Oxnard, Charles E.; Rubenson, Jonas
2016-01-01
The energy-sparing spring theory of the foot’s arch has become central to interpretations of the foot’s mechanical function and evolution. Using a novel insole technique that restricted compression of the foot’s longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms−1) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running. PMID:26783259
Three-dimensional measurement of foot arch in preschool children
2012-01-01
Background The prevalence of flexible flatfoot is high among preschool-aged children, but the effects of treatment are inconclusive due to the unclear definitions of normal flatfoot. To date, a universally accepted evaluation method of the foot arch in children has not been completely established. Our aims of this study were to establish a new method to evaluate the foot arch from a three dimensional perspective and to investigate the flexibility of the foot arch among children aged from two to six. Methods A total of 44 children aged from two to six years of age were put into five age groups in this study. The navicular height was measured with one leg standing, and both feet were scanned separately in both sitting and one leg standing positions to compute the foot arch volume. The arch volume index, which represents the ratio of the difference in volume between sitting and one leg standing positions to the volume when sitting was calculated to demonstrate the flexibility of the foot arch. The differences of measured parameters between each aged group were analyzed by one-way ANOVA. Results The arch volumes when sitting and standing were highly correlated with the navicular height. The navicular height ranged from 15.75 to 27 mm, the arch volume when sitting ranged from 6,223 to 11,630 mm3, and the arch volume when standing from 3,111 to 7,848 mm3 from two to six years of age. The arch volume index showed a declining trend as age increased. Conclusion This study is the first to describe the foot arch with volume perspective in preschool-aged children. The foot arch volume was highly correlated with the navicular height. Research results show both navicular height index and arch volume index gradually increase with age from two to six. At the same time the arch also becomes rigid with age from two to six. These results could be applied for clinical evaluation of the foot arch and post-treatment evaluation. PMID:23009315
[Application of rapid prototyping technology on nasoalveolar molding for cleft lip and palate].
Shen, Congcong; Chai, Gang
2017-12-01
To apply rapid prototyping (RP) technology on pre-fabricating nasoalveolar molding (NAM) appliances, and compare clinical outcomes and complications with traditional NAM appliances. Between June 2014 and September 2016, 39 children with unilateral cleft lip and palate were included in study. Seventeen children (test group) had received novel NAM protocol by pre-fabricating NAM appliances using RP technology, and the other 22 children (control group) had received traditional NAM protocol. There was no significant difference in gender, age, the side of cleft lip and palate, and the width of the alveolar cleft gap before treatment between 2 groups ( P >0.05). The change of width of the alveolar cleft gap, number of clinic visit, treatment time, and complications were compared between 2 groups. The number of clinic visit was less in test group than in control group ( P <0.05). There was no significant difference in treatment time between 2 groups ( P >0.05). During treatment, there was 16 children (72.2%) of skin irritation, 3 (13.6%) of mucosal ulceration, 1 (4.5%) of intraoral bleeding, 1 (4.5%) of alveolar arch T-shap asymmetry in control group. And there were 11 children (64.7%) of skin irritation, 3 (17.6%) of mucosal ulceration in test group. There was no significant difference in the incidence of complications between 2 groups ( P >0.05). After treatment, the anterior alveolar cleft width, horizontal cleft width, sagittal cleft width, antero-medial alveolar ridges angle of the healthy side, angle between anterior alveolar and posterior alveolar baseline of the healthy side, perpendicular distance from buccal frenum point to sagittal line were significantly reduced when compared with the values before treatment ( P <0.05). The angle between the anterior segments of two sides, angle between buccal frenum point and posterior baseline were significant increased when compared with the values before treatment ( P <0.05). There was no significant difference in the differences between pre- and post-treatment of above indexes between 2 groups ( P >0.05). There also was no significant difference in posterior alveolar width, the width between the middle parts of alveolar, vertical cleft width, antero-medial alveolar ridges angle of the affected side, and angle between anterior alveolar and posterior alveolar baseline of the affected side between pre- and post-treatment in each group ( P >0.05). Clinical outcome of novel approach was equivalent to traditional protocol; however, the number of clinic visit decreased. With improving of RP technology, it would provide a more consistency and convenient way for sequential treatment with cleft lip and palate.
Anderson, Megan; Amin, Shilu; Luise, Fabiana; Zeef, Leo; Bobola, Nicoletta
2013-01-01
Branchial arches are externally visible tissue bands in the head region of all vertebrate embryos. Although initially formed from similar components, each arch will give rise to different head and neck structures. In a screen designed to characterize the molecular control of branchial arch identity in mouse, we identified Pcp4 as a second branchial arch-specific molecular signature. We further show that the transcription factor Hoxa2 binds to Pcp4 chromatin and regulates Pcp4 expression in the second arch. Hoxa2 is also sufficient to induce Pcp4 expression in anterior first arch cells, which are Pcp4-negative.
Carpal tunnel syndrome: the role of occupational factors.
Palmer, Keith T
2011-02-01
Carpal tunnel syndrome (CTS) is a fairly common condition in working-aged people, sometimes caused by physical occupational activities, such as repeated and forceful movements of the hand and wrist or use of hand-held, powered, vibratory tools. Symptoms may be prevented or alleviated by primary control measures at work, and some cases of disease are compensable. Following a general description of the disorder, its epidemiology and some of the difficulties surrounding diagnosis, this review focusses on the role of occupational factors in causation of CTS and factors that can mitigate risk. Areas of uncertainty, debate and research interest are emphasised where relevant. Copyright © 2011 Elsevier Ltd. All rights reserved.
Hand pain other than carpal tunnel syndrome (CTS): the role of occupational factors.
Andréu, José-Luis; Otón, Teresa; Silva-Fernández, Lucía; Sanz, Jesús
2011-02-01
Some occupational factors have been implicated in the development of disorders manifested as hand pain. The associations seem to be well documented in processes such as hand-arm vibration syndrome (HAVS) or writer's cramp. There are contradictory data in the literature about the relationships of trigger finger, De Quervain's tenosynovitis (DQT) and tenosynovitis of the wrist with occupational factors. In this article, we review current knowledge about clinical manifestations, case definition, implicated occupational factors, diagnosis and treatment of the most relevant hand pain disorders that have been associated with occupational factors, excluding carpal tunnel syndrome (CTS). Copyright © 2010 Elsevier Ltd. All rights reserved.
Carpal tunnel syndrome: just a peripheral neuropathy?
Fernández-de-Las-Peñas, César; Plaza-Manzano, Gustavo
2018-06-05
Carpal tunnel syndrome (CTS) is considered just a peripheral neuropathy of the upper extremity associated to the compression of the median nerve. There is evidence suggesting the presence of complex sensitization mechanisms in CTS. These processes are manifested by symptoms in extra-median regions and the presence of bilateral sensory and motor impairments. These sensory and motor changes are not associated to electrodiagnostic findings. The presence of sensitization mechanisms suggests that CTS should not be considered just as a peripheral neuropathy. The presence of altered nociceptive gain processing should be considered for therapeutic management of CTS by considering the application of therapeutic interventions that modulate nociceptive barrage into the CNS.
Rainbow, Michael J.; Kamal, Robin N.; Moore, Douglas C.; Akelman, Edward; Wolfe, Scott W.; Crisco, Joseph J.
2015-01-01
This study examined whether the radiocarpal and dorsal capsular ligaments limit end-range wrist motion or remain strained during midrange wrist motion. Fibers of these ligaments were modeled in the wrists of 12 subjects over multiple wrist positions that reflect high demand tasks and the dart thrower's motion. We found that many of the volar and dorsal ligaments were within 5% of their maximum length throughout the range of wrist motion. Our finding of wrist ligament recruitment during midrange and end-range wrist motion helps to explain the complex but remarkably similar intersubject patterns of carpal motion. PMID:26367853
Hermann, E; Mayet, W J; Wandel, E; Scherer, G; Schadmand, S; Klose, K J; Poralla, T; Meyer zum Büschenfelde, K H; Köhler, H
1991-01-01
beta 2-microglobulin amyloidosis is a major complication in chronic hemodialysis patients. Destructive arthropathy, spondylarthropathy, and carpal tunnel syndrome are clinical manifestations of beta 2M amyloid depositions within the joints, intervertebral discs, and tendon sheets. We have investigated the prevalence of beta 2M amyloidosis associated radiological joint lesions in a population of 175 patients on chronic hemodialysis. In 32 of 175 patients the diagnosis of amyloidosis arthropathy and spondylarthropathy was made by radiomorphological criteria. These 32 patients were asked about rheumatic symptoms (localisation and character of pain, synovitis, carpal tunnel syndrome, influence of dialysis membrane on pain) and examined clinically. Bilateral pain of the shoulders or wrists was complained by most of the patients. 24 of the 32 patients had signs of secondary hyperparathyroidism besides beta 2M-amyloidosis. 29 patients had a carpal tunnel syndrome, 23 of whom had to be operated. beta 2M-amyloid was histochemically demonstrated in all of these 23 cases. Renal transplantation led to immediate pain relief in 3 out of 3 patients, a change of the dialysis membrane (high-flux membrane) improved chronic pain in the majority of patients.
Application of TrackEye in equine locomotion research.
Drevemo, S; Roepstorff, L; Kallings, P; Johnston, C J
1993-01-01
TrackEye is an analysis system, which is applicable for equine biokinematic studies. It covers the whole process from digitizing of images, automatic target tracking and analysis. Key components in the system are an image work station for processing of video images and a high-resolution film-to-video scanner for 16-mm film. A recording module controls the input device and handles the capture of image sequences into a videodisc system, and a tracking module is able to follow reference markers automatically. The system offers a flexible analysis including calculations of markers displacements, distances and joint angles, velocities and accelerations. TrackEye was used to study effects of phenylbutazone on the fetlock and carpal joint angle movements in a horse with a mild lameness caused by osteo-arthritis in the fetlock joint of a forelimb. Significant differences, most evident before treatment, were observed in the minimum fetlock and carpal joint angles when contralateral limbs were compared (p < 0.001). The minimum fetlock angle and the minimum carpal joint angle were significantly greater in the lame limb before treatment compared to those 6, 37 and 49 h after the last treatment (p < 0.001).
Buntragulpoontawee, Montana; Phutrit, Suphatha; Tongprasert, Siam; Wongpakaran, Tinakon; Khunachiva, Jeeranan
2018-03-27
This study evaluated additional psychometric properties of the Thai version of the disabilities of the arm, shoulder and hand questionnaire (DASH-TH) which included, test-retest reliability, construct validity, internal consistency of in patients with carpal tunnel syndrome. As for determining construct validity, the Thai EuroQOL questionnaire (EQ-5D-5L) was also administered in order to examine convergent and divergent validity. Fifty patients completed both questionnaires. The DASH-TH showed excellent test-retest reliability (intraclass correlation coefficient = 0.811) and internal consistency (Cronbach's alpha = 0.911). The exploratory factor analysis yielded a six-factor solution while the confirmatory factor analysis denoted that the hypothesized model adequately fit the data with a comparative fit index of 0.967 and a Tucker-Lewis index of 0.964. The related subscales between the DASH-TH and the Thai EQ-5D-5L were significantly correlated, indicating the DASH-TH's convergent and discriminant validity. The DASH-TH demonstrated good reliability, internal consistency construct validity, and multidimensionality, in assessing the upper extremity function in carpal tunnel syndrome patients.
Early return to work following open carpal tunnel decompression in lamb freezing workers.
Wyatt, M C; Veale, G A
2008-08-01
Carpal tunnel syndrome is common at the largest lamb processing plant in the world, especially in new lamb boners. The purpose of this study was to establish the incidence and whether expeditious return to work following open carpal tunnel decompression was possible. Two hundred patients with a neurophysiologically confirmed diagnosis underwent surgery between 2002 and 2006. One hundred and eighty-seven patients were assessed retrospectively and 13 prospectively. The incidence in new lamb boners was 10% in their first season. On average, workers commenced rehabilitation at 11 days post-operatively and full duties at 29 days post-operatively with minimal further time off taken. Ninety percent returned to their previous role. By 8 weeks in the prospective group visual analogue pain scores had improved from 8.75 to 2.0 (P<0.01) and Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) scores had improved from 140 points to 68 (P<0.01). Grip/pinch testing, static two-point discrimination scores and complication rates were comparable with previous studies. This study provides good evidence that coordinated, early rehabilitation and return to work is effective in a high-demand population.
Imaeda, Toshihiko; Uchiyama, Shigeharu; Toh, Satoshi; Wada, Takuro; Okinaga, Shuji; Sawaizumi, Takuya; Nishida, Jun; Kusunose, Koichi; Omokawa, Shohei
2007-01-01
The Carpal Tunnel Syndrome Instrument (CTSI) is a disease-specific, self-administered questionnaire that consists of a symptom severity scale (SS) and a functional status scale (FS). The CTSI was cross-culturally adapted and developed by the Impairment Evaluation Committee, Japanese Society for Surgery of the Hand (JSSH). The purpose of this study was to test the reliability, validity, and responsiveness of the Japanese version of the CTSI (CTSI-JSSH). A consecutive series of 87 patients with carpal tunnel syndrome completed the CTSI-JSSH, the JSSH version of the Disability of the Arm, Shoulder, and Hand questionnaire (DASH-JSSH), and the 36-Item Short-Form Health Survey (SF-36). Seventy-two of the patients were reassessed for test-retest reliability 1 or 2 weeks later. Reliability was investigated by the reproducibility and the internal consistency. To analyze the validity, a factor analysis (principal axis factoring) of the CTSI-JSSH and the correlation coefficients between the CTSI-JSSH and DASH-JSSH were obtained. The responsiveness was examined by calculating the standardized response mean (SRM; mean change/SD) and effect size (mean change/SD of baseline value) after carpal tunnel release in 42 patients. Cronbach's alpha coefficients for the CTSI-JSSH-SS and the CTSI-JSSH-FS were 0.84 and 0.90, respectively, and the intraclass correlation coefficients were 0.82 and 0.83, respectively. The unidimensionality of the CTSI-JSSH-SS was barely confirmed; the unidimensionality of the CTSI-JSSH-FS was confirmed. The correlation coefficients between the CTSI-JSSH-FS and the CTSI-JSSH-SS or DASH-JSSH were 0.58 and 0.80, respectively. The correlation coefficient between the CTSI-JSSH-SS and DASH-JSSH was 0.54. The correlation coefficients between the subscales of SF-36 and the CTSI-JSSH-SS or the CTSI-JSSH-FS ranged from -0.23 to -0.66 and from -0.19 to -0.63, respectively. The SRMs/effect sizes of the CTSI-JSSH-SS and the CTSI-JSSH-FS were -0.85/-0.99 and -0.70/-0.61, which indicated that they were more than moderately sensitive. The CTSI-JSSH has sufficient reliability, validity, and responsiveness to assess the health status in carpal tunnel syndrome.
Kairalla, Silvana Allegrini; Scuzzo, Giuseppe; Triviño, Tarcila; Velasco, Leandro; Lombardo, Luca; Paranhos, Luiz Renato
2014-01-01
This study aims to determine the shape and dimension of dental arches from a lingual perspective, and determine shape and size of a straight archwire used for lingual Orthodontics. The study sample comprised 70 Caucasian Brazilian individuals with normal occlusion and at least four of Andrew's six keys. Maxillary and mandibular dental casts were digitized (3D) and the images were analyzed by Delcam Power SHAPET 2010 software. Landmarks on the lingual surface of teeth were selected and 14 measurements were calculated to determine the shape and size of dental arches. Shapiro-Wilk test determined small arch shape by means of 25th percentile (P25%)--an average percentile for the medium arch; and a large one determined by means of 75th percentile (P75%). T-test revealed differences between males and females in the size of 12 dental arches. The straight-wire arch shape used in the lingual straight wire technique is a parabolic-shaped arch, slightly flattened on its anterior portion. Due to similarity among dental arch sizes shown by males and females, a more simplified diagram chart was designed.
Pennsylvanian history of the Chautauqua Arch
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bennison, A.P.
1993-03-01
Westward extension of the Ozark Uplift known as the Chautauqua Arch is concealed by a Pennsylvanian cover. This cover provides an insight into its later tectonic history subsequent to its major Late Devonian uplift and truncation. Part of this arch was episodically uplifted during Pennsylvanian time in an area extending west from southwestern Missouri along the Kansas-Oklahoma border to western Montgomery County. Recent stratigraphic mapping in that county indicates moderate Late Desmoinesian to Missourian tectonism. Some strata present on both flanks of the arch are either comparatively thin or missing owing to unconformity truncation or non-deposition. Stratal loss involves themore » Lenapah Limestone, the Hepler and Lost Branch formations, the Cherryvale Shale and the Hertha, Drum, Dewey, Stanton and Wyandotte Limestones. Earlier movements also account for the truncation of Morrowan, Atokan and possibly some Early Desmoinesian beds over the arch. Between tectonic episodes along the arch there were periods of relative tectonic quiescence accompanied by shelf-edge carbonate banks, condensed sequences and siliciclastic sedimentation. West of Montgomery County in Chautauqua County, the widespread Late Pennsylvanian Virgilian outcrops show practically no tectonism. Therefore, the name Chautauqua Arch seems inappropriate for this Pennsylvanian arch, and the name Tri-State Arch is proposed. This arch is bounded on the north by the Cherokee Basin and on the south by the northern rise of the Arkoma Basin. Although this arch is commonly omitted on many tectonic maps, it is a stronger gravity feature than the Bourbon Arch about 50 miles northward. Both tectonic and sedimentary structures have produced much oil and gas entrapment along this arch. For example, an east-west fault south of Independence, aligned with buried Proterozoic hills, has been specially productive.« less
10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...
10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, HANGERS AND GUARDRAIL. VIEW TO SOUTH. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA
Shoi, K; Fueki, K; Usui, N; Taira, M; Wakabayashi, N
2014-07-01
It is well known that shortened dental arch decreases masticatory function. However, its potential to change brain activity during mastication is unknown. The present study investigates the effect of a shortened posterior dental arch with mandibular removable partial dentures (RPDs) on brain activity during gum chewing. Eleven subjects with missing mandibular molars (mean age, 66.1 years) on both sides received experimental RPDs with interchangeable artificial molars in a crossover trial design. Brain activity during gum chewing with RPDs containing (full dental arch) and lacking artificial molars (shortened dental arch) was measured using functional magnetic resonance imaging. Additionally, masticatory function was evaluated for each dental arch type. Food comminuting and mixing ability and the perceived chewing ability were significantly lower in subjects with a shortened dental arch than those with a full dental arch (P < 0.05). Brain activation during gum chewing with the full dental arch occurred in the middle frontal gyrus, primary sensorimotor cortex extending to the pre-central gyrus, supplementary motor area, putamen, insula and cerebellum. However, middle frontal gyrus activation was not observed during gum chewing with the shortened dental arch. These results suggest that shortened dental arch affects human brain activity in the middle frontal gyrus during gum chewing, and the decreased middle frontal gyrus activation may be associated with decreased masticatory function. © 2014 John Wiley & Sons Ltd.
9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...
9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ARTICULATED HANGER AND GUARDRAIL. VIEW TO SOUTHEAST. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA
In-plane free vibration analysis of cable arch structure
NASA Astrophysics Data System (ADS)
Zhao, Yueyu; Kang, Houjun
2008-05-01
Cable-stayed arch bridge is a new type of composite bridge, which utilizes the mechanical characters of cable and arch. Based on the supporting members of cable-stayed arch bridge and of erection of arch bridge using of the cantilever construction method with tiebacks, we propose a novel mechanical model of cable-arch structure. In this model, the equations governing vibrations of the cable-arch are derived according to Hamilton's principle for dynamic problems in elastic body under equilibrium state. Then, the program of solving the dynamic governing equations is ultimately established by the transfer matrix method for free vibration of uniform and variable cross-section, and the internal characteristics of the cable-arch are investigated. After analyzing step by step, the research results approve that the program is accurate; meanwhile, the mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.
Kolesová, Hana; Lametschwandtner, Alois; Roček, Zbyněk
2007-01-01
In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete. PMID:17367494
Kolesová, Hana; Lametschwandtner, Alois; Rocek, Zbynek
2007-04-01
In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete.
Standardizing Foot-Type Classification Using Arch Index Values
Weil, Rich; de Boer, Emily
2012-01-01
ABSTRACT Purpose: The lack of a reliable classification standard for foot type makes drawing conclusions from existing research and clinical decisions difficult, since different foot types may move and respond to treatment differently. The purpose of this study was to determine interrater agreement for foot-type classification based on photo-box-derived arch index values. Method: For this correlational study with two raters, a sample of 11 healthy volunteers with normal to obese body mass indices was recruited from both a community weight-loss programme and a programme in physical therapy. Arch index was calculated using AutoCAD software from footprint photographs obtained via mirrored photo-box. Classification as high-arched, normal, or low-arched foot type was based on arch index values. Reliability of the arch index was determined with intra-class correlations; agreement on foot-type classification was determined using quadratic weighted kappa (κw). Results: Average arch index was 0.215 for one tester and 0.219 for the second tester, with an overall range of 0.017 to 0.370. Both testers classified 6 feet as low-arched, 9 feet as normal, and 7 feet as high-arched. Interrater reliability for the arch index was ICC=0.90; interrater agreement for foot-type classification was κw=0.923. Conclusions: Classification of foot type based on arch index values derived from plantar footprint photographs obtained via mirrored photo-box showed excellent reliability in people with varying BMI. Foot-type classification may help clinicians and researchers subdivide sample populations to better differentiate mobility, gait, or treatment effects among foot types. PMID:23729964
Adams, Ashok; Mankad, Kshitij; Offiah, Curtis; Childs, Lucy
2016-02-01
The branchial arches are the embryological precursors of the face, neck and pharynx. Anomalies of the branchial arches are the second most common congenital lesions of the head and neck in children, with second branchial arch anomalies by far the most common. Clinically, these congenital anomalies may present as cysts, sinus tracts, fistulae or cartilaginous remnants with typical clinical and radiological findings. We review the normal embryological development of the branchial arches and the anatomical structures of the head and neck that derive from each arch. The typical clinical and radiological appearances of both common and uncommon branchial arch abnormalities are discussed with an emphasis on branchial cleft anomalies. • Anomalies of the branchial arches usually present as cysts, sinuses or fistulae. • Second branchial arch anomalies account for approximately 95 % of cases. • There are no pathognomonic imaging features so diagnosis depends on a high index of suspicion and knowledge of typical locations. • Persistent cysts, fistulae or recurrent localised infection may be due to branchial arch anomalies. • Surgical excision of the cyst or tract is the most common curative option.
Heiser, Wolfgang; Richter, Martin; Niederwanger, Andreas; Neunteufel, Nikolaus; Kulmer, Siegfried
2008-05-01
Long-term stability is an important measure of the success of orthodontic treatment. Research in the 1970s suggested that premolar extraction treatment had poor stability over the long term. The purpose of this prospective follow-up study was to investigate changes in intercanine widths and the irregularity index during the postretention phase in patients treated with and without extractions. Associations between the maxillary canine guidance angle and the mandibular intercanine widths and the mandibular irregularity index were also examined. Two groups of 30 patients each, with and without premolar extractions, were studied and the results compared. Records were taken at pretreatment, at bracket removal, at the end of retention, and out of retention. The times out of retention were 6.3 years for the nonextraction group and 6.5 years for the extraction group. Stone casts were mounted on an articulator with an anatomical facebow and a central wax record. The measurements were made with a 3-dimensional digitizer. Maxillary and mandibular intercanine distances behaved differently. The mandibular intercanine distance showed a net decrease between pretreatment and follow-up, whereas the maxillary arch had a net increase. The maxillary canine guidance angle at the end of retention, measured to the axis-orbital plane, was highly associated with relapse of mandibular anterior alignment and change of the mandibular intercanine distance. Methods are needed that consider the anatomical configuration of the teeth for bracket selection before treatment. Individualized brackets (torque) should then be coordinated with the guidance angle of the maxillary teeth.
3. View locking east of 591 foot steel arch of ...
3. View locking east of 591 foot steel arch of bridge. Arch consists of Pratt trusses divided into twenty-four, 24 foot, 7 inch panels. It was fabricated by the King Iron Bridge Company of Cleveland whose circular plaque can be seen where the arch meets the roadway. The steel arch was erected by the Berro construction Co. of Chicago. - Detroit Superior High Level Bridge, Cleveland, Cuyahoga County, OH
Lee, Sae Yong; Hertel, Jay; Lee, Sung Cheol
2010-01-01
Rearfoot eversion motion and arch height are believed to contribute to increased tension on the plantar fascia and arch collapse during gait but the specifics of these relationships are not clear. To examine the relationships among static arch height, rearfoot eversion, dynamic arch height, and plantar fascia tension. 28 healthy males participated. After static arch height was measured, the subjects were asked to run at 4.5m/s while frontal plane rearfoot motion, dynamic arch height, and ground reaction forces were collected. The relationships among variables were examined with bivariate correlations and path analysis. The results indicated a high correlation between dynamic arch height and static arch height (r=0.642), plantar fascia tension (r=-0.797), and maximum rearfoot eversion motion during gait (r=-0.518). The path analysis model without the direct rearfoot eversion effect explained 81.2% of the variance in plantar fascia tension, while the model with the direct rearfoot eversion effect explained 82.1% of the variance in plantar fascia tension. Including the indirect effect of maximum rearfoot eversion motion on plantar fascia tension through control of dynamic arch height is the model that best explains the interrelationships of these foot characteristics. The amount of maximum rearfoot eversion motion itself is not a good predictor of plantar fascia tension, however, together with the arch height, maximum rearfoot eversion motion is a good predictor because it has a pronounced indirect effect on plantar fascia tension. Copyright 2010. Published by Elsevier Ltd.
[Angiographic evaluation of branching pattern and anatomy of the aortic arch].
Ergun, Onur; Tatar, İdil Güneş; Birgi, Erdem; Durmaz, Hasan Ali; Akçalar, Seray; Kurt, Aydın; Hekimoğlu, Baki
2015-04-01
The study aimed to investigate anatomical variations in branching pattern and anatomy of the aortic arch, and the prevalence of each type. Between September 2011 and November 2013, angiographic studies of 270 patients (144 male, 126 female) were analyzed retrospectively for variations in branching pattern and anatomy of the aortic arch. Patient mean age was 59.8 years (range, 13-88). Branching variations were found and divided into subtypes. Patients were also classified according to arch anatomy. Incidence of variations and types of aortic arch were statistically analysed. Analysis of the 270 patients revealed six types of branching pattern. Type I, classical pattern arch with three branches (TB, LCC, LS), was observed in 198 cases (73.3%). Type II (bovine arch), the most commonly observed variation, in which LCC originates from TB, was observed in 58 cases (21.5%). Type III, in which the left vertebral artery arises from the arch, was seen in seven cases (2.6%). Type IV, a combination of types II and III, was observed in three cases (1.1%). Type V, common origin of common carotids, LS and aberrant RS, was found in three cases (1.1%). Type VI (avian type), arch with only two branches, was observed in one case (0.4%). When patients were classified according to aortic arch anatomy, Type 1, Type 2 and Type 3 were observed in 195, 40 and 35 patients respectively. Knowledge of the variations and anatomy of the aortic arch is essential during interventional procedures and neck-thorax surgery.
3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE ...
3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE SPANDREL WALL IS LAID IN A SEMI-COURSED RUBBLE PATTERN. - Core Creek County Bridge, Spanning Core Creek, approximately 1 mile South of State Route 332 (Newtown Bypass), Newtown, Bucks County, PA
Vocal cord paralysis after aortic arch surgery: predictors and clinical outcome.
Ohta, Noriyuki; Kuratani, Toru; Hagihira, Satoshi; Kazumi, Ken-Ichiro; Kaneko, Mitsunori; Mori, Takahiko
2006-04-01
This study is retrospective cohort study of data on vocal cord paralysis after aortic arch surgery collected during 14 years at a general hospital. We investigated factors in the development of vocal cord paralysis after aortic arch surgery and the effect of vocal cord paralysis on clinical course and outcome. We reviewed data for 182 patients who underwent aortic arch surgery for aortic arch aneurysm and aortic dissection between 1989 and 2003, of whom 58 patients had proximal aortic repair, 62 had distal arch repair, and 62 had total arch repair. We assessed factors associated with the development of vocal cord paralysis and examined in detail the clinical outcome of patients with vocal cord paralysis. Postoperative vocal cord paralysis occurred in 40 patients. Multiple logistic regression analysis revealed the following risk factors with odds ratios (OR) for vocal cord paralysis: extension of procedures into distal arch (OR, 17.0), chronic dilatation of the aorta at the left subclavian artery (OR, 9.14), and total arch repair (OR, 4.24). Adoption of open-style stent-grafts reduced the incidence of vocal cord paralysis (OR, 0.031). The postoperative occurrence of vocal cord paralysis itself emerges as an independent predictor of pulmonary complications (OR, 4.12) and leads to a longer duration of hospital stay. The risk of vocal cord paralysis after aortic arch surgery depends on surgical factors, such as aneurysmal involvement of the distal arch, or the application of newer, less invasive surgical procedures. Vocal cord paralysis after aortic arch surgery itself, under aggressive postoperative respiratory management, did not increase aspiration pneumonia but was associated with postoperative complications leading to higher hospital mortality and prolonged hospitalization.
Yamada, Shigeki; Hashimoto, Kenji; Ogata, Hideki; Watanabe, Yoshihiko; Oshima, Marie; Miyake, Hidenori
2014-02-01
Simple rating scale for calcification in the cervical arteries and the aortic arch on multi-detector computed tomography angiography (MDCTA) was evaluated its reliability and validity. Additionally, we investigated where is the most representative location for evaluating the calcification risk of carotid bifurcation stenosis and atherosclerotic infarction in the overall cervical arteries covering from the aortic arch to the carotid bifurcation. The aortic arch and cervical arteries among 518 patients (292 men, 226 women) were evaluated the extent of calcification using a 4-point grading scale for MDCTA. Reliability, validity and the concomitant risk with vascular stenosis and atherosclerotic infarction were assessed. Calcification was most frequently observed in the aortic arch itself, the orifices from the aortic arch, and the carotid bifurcation. Compared with the bilateral carotid bifurcations, the aortic arch itself had a stronger inter-observer agreement for the calcification score (Fleiss' kappa coefficients; 0.77), but weaker associations with stenosis and atherosclerotic infarction. Calcification at the orifices of the aortic arch branches had a stronger inter-observer agreement (0.74) and enough associations with carotid bifurcation stenosis and intracranial stenosis. In addition, the extensive calcification at the orifices from the aortic arch was significantly associated with atherosclerotic infarction, similar to the calcification at the bilateral carotid bifurcations. The orifices of the aortic arch branches were the novel representative location of the aortic arch and overall cervical arteries for evaluating the calcification extent. Thus, calcification at the aortic arch should be evaluated with focus on the orifices of 3 main branches. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Using ArchE in the Classroom: One Experience
2007-09-01
The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of
Borges, Cláudia Dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival
2013-05-01
: Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) CONCLUSION: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series .
A case of complete double aortic arch visualized by transthoracic echocardiography.
Saito, Naka; Kato, Shingo; Saito, Noritaka; Nakachi, Tatsuya; Fukui, Kazuki; Iwasawa, Tae; Kosuge, Masami; Kimura, Kazuo
2017-08-01
A case of double aortic arch that was well visualized using transthoracic echocardiography is reported. A 38-year-old man underwent transthoracic echocardiography for the evaluation of dyspnea. A suprasternal view of transthoracic echocardiography showed the ascending aorta bifurcate to left and right aortic arches, with blood flow from the ascending aorta to bilateral aortic arches. The diagnosis of right side-dominant double aortic arch was made, and the patient's symptom was conceivably related to compression of the trachea due to a vascular ring. This report indicates the potential usefulness of transthoracic echocardiography for noninvasive detection of double aortic arch in adults. © 2017, Wiley Periodicals, Inc.
[Effects of shortened mandibular dental arch on human brain activity during chewing: an fMRI study].
Shoi, Kazuhito
2014-03-01
According to the shortened dental arch concept, missing molars should not always be restored with prosthetic treatment. A shortened dental arch with missing molars is associated with a decrease in masticatory function. However, it is not known whether a shortened dental arch influences brain activity during chewing. This study aimed to clarify the effect of posterior arch length of mandibular bilateral distal extension removable partial dentures (RPDs) on brain activity during chewing. Eleven subjects with bilaterally missing mandibular molars (mean age, 66.1 years) participated in the study. RPDs with full dental arch and shortened dental arch were fabricated and brain activity during gum chewing under each dental condition was measured using functional magnetic resonance imaging. Brain activation during gum chewing with the full dental arch was observed in the middle frontal gyrus, primary sensorimotor cortex extending to the premotor cortex, supplementary motor area, putamen, insula and cerebellum. However, activation of the middle frontal gyrus was not observed during gum chewing with the shortened dental arch. The results of this study suggest that human brain activity during chewing in the middle frontal gyrus may be associated with chewing in the presence of the molar region.
Human evaluation in association to the mathematical analysis of arch forms: Two-dimensional study.
Zabidin, Nurwahidah; Mohamed, Alizae Marny; Zaharim, Azami; Marizan Nor, Murshida; Rosli, Tanti Irawati
2018-03-01
To evaluate the relationship between human evaluation of the dental-arch form, to complete a mathematical analysis via two different methods in quantifying the arch form, and to establish agreement with the fourth-order polynomial equation. This study included 64 sets of digitised maxilla and mandible dental casts obtained from a sample of dental arch with normal occlusion. For human evaluation, a convenient sample of orthodontic practitioners ranked the photo images of dental cast from the most tapered to the less tapered (square). In the mathematical analysis, dental arches were interpolated using the fourth-order polynomial equation with millimetric acetate paper and AutoCAD software. Finally, the relations between human evaluation and mathematical objective analyses were evaluated. Human evaluations were found to be generally in agreement, but only at the extremes of tapered and square arch forms; this indicated general human error and observer bias. The two methods used to plot the arch form were comparable. The use of fourth-order polynomial equation may be facilitative in obtaining a smooth curve, which can produce a template for individual arch that represents all potential tooth positions for the dental arch. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.
Fernández-Sanromán, Jacinto; Donascimento, Montserrat González; López, Alberto Costas; Ferro, Martín Fernández; Berrondo, Ibon Almandoz
2010-07-01
We present our experience using modified Hyrax devices for treating transverse deficiencies of the maxilla in adult patients with periodontal pathology or insufficient tooth anchorage. The surgical technique, clinical indications, and results are discussed. Eight adult patients (6 females, 2 males) requiring maxillary expansion were studied prospectively between July 2002 and July 2007. All the patients had periodontal pathology or insufficient tooth anchorage preventing the use of conventional Hyrax devices. Patients underwent surgically assisted rapid maxillary expansion with the use of custom-made modified Hyrax devices (bone-borne or tooth-bone-borne devices). Patients received preoperatively (T1), at the end of distraction (T2), at removal of the expansion device (T3), and 12 months after surgery (T4) lateral and posterior anterior cephalograms and study models to measure the width of the anterior and posterior dental arches with a digital sliding calliper. Mean age was 28.5 years (range, 18-45 years). A significant widening of the anterior (6.3 +/- 1.6 mm) and posterior (7.1 +/- 1.2 mm) dental arches was demonstrated. No significant differences were found when comparing T3 with T4 measures. No significant complications were found. The results indicated that maxillary expansion with custom-made devices in adults was an easy, affordable, predictable and stable technique without significant complications in patients who suffer periodontal pathology or patients without enough dental support. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
A program plan addressing carpal tunnel syndrome: the utility of King's goal attainment theory.
Norgan, G H; Ettipio, A M; Lasome, C E
1995-08-01
1. Today's nurse is prepared to address the needs of groups of individuals who share common characteristics or risks (aggregates). Program planning skills and ability to use nursing theory can enhance the nurse's effectiveness in addressing the needs of such aggregates. 2. Carpal tunnel syndrome and other repetitive stress injuries are very costly to industry, both in terms of monetary loss and lost work hours. Such injuries can be reduced in the workplace through careful observation and communication of trends by the nurse. 3. The systems perspective of King's goal attainment theory guided the nurse in problem solving and facilitating the development of a workplace capable of responding to trends as they occur.
35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED ...
35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED BETWEEN TOWER LEGS, AND ASHLAR MASONRY WALLS AND PYLONS Pen-and-ink drawing by project architect Alfred Eichler, 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA
Li, Peng; Pashmforoush, Mohammad; Sucov, Henry M.
2011-01-01
Disruption of retinoic acid signaling causes a variety of pharyngeal arch artery and great vessel defects, as well as malformations in many other tissues, including those derived from the pharyngeal endoderm. Previous studies implied that arch artery defects in the context of defective RA signaling occur secondary to pharyngeal pouch segmentation defects, although this model has never been experimentally verified. In this study, we examined arch artery morphogenesis during mouse development, and the role of RA in this process. We show in normal embryos that the arch arteries form by vasculogenic differentiation of pharyngeal mesoderm. Using various genetic backgrounds and tissue-specific mutation approaches, we segregate pharyngeal arch artery and pharyngeal pouch defects in RA receptor mutants, and show that RA signal transduction only in pharyngeal mesoderm is required for arch artery formation. RA does not control pharyngeal mesodermal differentiation to endothelium, but instead promotes the aggregation of endothelial cells into nascent vessels. Expression of VE-cadherin was substantially reduced in RAR mutants, and this deficiency may underlie the arch artery defects. The consequences of disrupted mesodermal and endodermal RA signaling were restricted to the 4th and 6th arch arteries and to the 4th pharyngeal pouch, respectively, suggesting that different regulatory mechanisms control the formation of the more anterior arch arteries and pouches. PMID:22040871
Kulkarni, Rahul S.; Shah, Rupal J.; Chhajlani, Rahul; Saklecha, Bhuwan; Maru, Kavita
2017-01-01
Introduction The clinician’s skill, impression techniques, and materials play a very important role in recording fine details in an impression for accuracy of fixed partial denture prosthesis. Impression of prepared teeth and of the opposing arch can be recorded simultaneously by dual-arch trays, while the full arch metal trays are used for impressions of prepared teeth in one arch. Aim To measure and compare the accuracy of working dies made from impressions with metal and plastic dual arch trays and metal full arch trays, for two viscosities of impression material and by changing the sequence of pour of working and non-working sides. Materials and Methods A balanced design with independent samples was used to study the three variables (tray type, impression material viscosity, and pouring sequence). An impression made by dual arch trays and single arch trays were divided in to three groups (Group A-plastic dual arch tray, Group B-metal dual arch tray, Group C-full arch metal stock tray). Out of these three groups, two groups (Group A and B) were subdivided in to four subgroups each and one group (Group C) was subdivided in to two subgroups. A sample size of 30 was used in each subgroup yielding a total 300 impressions in three groups or ten subgroups. Impressions were made of a machined circular stainless steel die. All three dimensions (Occlusogingival, Mesiodistal, and Buccolingual) of the working dies as well as stainless steel standard die were measured three times, and the mean was used for the three standard sample values to which all working dies means were compared. Statistical analysis used for this study was a 3-factor analysis of variance with hypothesis testing at α =0.05. Results With respect to the selection of impression material viscosity statistically significant differences were found in the dies for the buccolingual and mesiodistal dimensions. Metal dual arch trays were slightly more accurate in the mesiodistal dimension in comparison to the plastic trays in reference of tray selection and in view of pouring sequence no differences were observed in occlusogingival dimension but in buccolingual and mesiodistal dimensions nonworking side was more accurate. Conclusion The gypsum dies produced from the dual arch impressions were generally smaller in all three dimensions than the stainless steel standard die. Plastic dual-arch trays were more accurate with rigid impression material and there was not statistically significant difference for sequence of pouring. Metal dual-arch trays were more accurate with monophase impression material and working side was more accurate. Stock metal full arch trays were more accurate for monophase impression material. PMID:28571280
Is arch form influenced by sagittal molar relationship or Bolton tooth-size discrepancy?
Aldrees, Abdullah M; Al-Shujaa, Abdulmajeed M; Alqahtani, Mohammad A; Aljhani, Ali S
2015-06-26
Orthodontic patients show high prevalence of tooth-size discrepancy. This study investigates the possible association between arch form, clinically significant tooth-size discrepancy, and sagittal molar relationship. Pretreatment orthodontic casts of 230 Saudi patients were classified into one of three arch form types (tapered, ovoid, and square) using digitally scanned images of the mandibular arches. Bolton ratio was calculated, sagittal molar relationship was defined according to Angle classification, and correlations were analyzed using ANOVA, chi-square, and t-tests. No single arch form was significantly more common than the others. Furthermore, no association was observed between the presence of significant Bolton discrepancy and the sagittal molar relationship or arch form. Overall Bolton discrepancy is significantly more prevalent in males. Arch form in a Saudi patient group is independent of gender, sagittal molar relationship, and Bolton discrepancy.
NASA Technical Reports Server (NTRS)
Moore, Ronald L.; Sterling, Alphonse C.; Suess, Steven T.
2007-01-01
We show that the strength (B(sub F1are)) of the magnetic field in the area covered by the flare arcade following a CME-producing ejective solar eruption can be estimated from the final angular width (Final Theta(sub CME)) of the CME in the outer corona and the final angular width (Theta(sub Flare)) of the flare arcade: B(sub Flare) approx. equals 1.4[(Final Theta(sub CME)/Theta(sub Flare)] (exp 2)G. We assume (1) the flux-rope plasmoid ejected from the flare site becomes the interior of the CME plasmoid; (2) in the outer corona (R > 2 (solar radius)) the CME is roughly a "spherical plasmoid with legs" shaped like a lightbulb; and (3) beyond some height in or below the outer corona the CME plasmoid is in lateral pressure balance with the surrounding magnetic field. The strength of the nearly radial magnetic field in the outer corona is estimated from the radial component of the interplanetary magnetic field measured by Ulysses. We apply this model to three well-observed CMEs that exploded from flare regions of extremely different size and magnetic setting. One of these CMEs was an over-and-out CME, that is, in the outer corona the CME was laterally far offset from the flare-marked source of the driving magnetic explosion. In each event, the estimated source-region field strength is appropriate for the magnetic setting of the flare. This agreement (1) indicates that CMEs are propelled by the magnetic field of the CME plasmoid pushing against the surrounding magnetic field; (2) supports the magnetic-arch-blowout scenario for over-and-out CMEs; and (3) shows that a CME's final angular width in the outer corona can be estimated from the amount of magnetic flux covered by the source-region flare arcade.
Preliminary Design of ArchE: A Software Architecture Design Assistant
2003-09-01
This report presents a procedure for moving from a set of quality attribute scenarios to an architecture design that satisfies those scenarios. This...procedure is embodied in a preliminary design for an architecture design assistant named ArchE (Architecture Expert), which will be implemented on a
El-Sayed, Abdulrahman M; Hadley, Craig; Tessema, Fasil; Tegegn, Ayelew; Cowan, John A; Galea, Sandro
2010-12-31
Food insecurity (FI) has been shown to be associated with poor health both in developing and developed countries. Little is known about the relation between FI and neurological disorder. We assessed the relation between FI and risk for neurologic symptoms in southwest Ethiopia. Data about food security, gender, age, household assets, and self-reported neurologic symptoms were collected from a representative, community-based sample of adults (N = 900) in Jimma Zone, Ethiopia. We calculated univariate statistics and used bivariate chi-square tests and multivariate logistic regression models to assess the relation between FI and risk of neurologic symptoms including seizures, extremity weakness, extremity numbness, tremors/ataxia, aphasia, carpal tunnel syndrome, vision dysfunction, and spinal pain. In separate multivariate models by outcome and gender, adjusting for age and household socioeconomic status, severe FI was associated with higher odds of seizures, movement abnormalities, carpal tunnel, vision dysfunction, spinal pain, and comorbid disorders among women. Severe FI was associated with higher odds of seizures, extremity numbness, movement abnormalities, difficulty speaking, carpal tunnel, vision dysfunction, and comorbid disorders among men. We found that FI was associated with symptoms of neurologic disorder. Given the cross-sectional nature of our study, the directionality of these associations is unclear. Future research should assess causal mechanisms relating FI to neurologic symptoms in sub-Saharan Africa.
Fleming, Padhraig S; DiBiase, Andrew T; Sarri, Grammati; Lee, Robert T
2009-09-01
Our objective was to compare the effects of 2 preadjusted appliances on angular and linear changes of the mandibular incisors, and transverse mandibular arch dimensional changes over a minimum of 30 weeks. This was a prospective, randomized, controlled, clinical trial a the Royal London Hospital, School of Dentistry, in London and the Kent and Canterbury Hospital in Canterbury, United Kingdom. Sixty- six consecutive patients satisfying the inclusion criteria were enrolled and randomly allocated to treatment with a self-ligating bracket system (SmartClip, 3M Unitek, Monrovia, Calif) and conventional preadjusted edgewise brackets (Victory, 3M Unitek). Initial study models and cephalograms were obtained within a month of starting the trial. All subjects received treatment with the following archwire sequence: 0.016-in round, 0.017 x 0.025-in rectangular, 0.019 x 0.025-in rectangular martensitic active nickel-titanium archwires, and 0.019 x 0.025-in stainless steel archwires. Final records, including study models and a lateral cephalogram, were collected a minimum of 30 weeks after initial appliance placement. Lateral cephalograms were assessed for treatment-related changes in mandibular incisor inclination and position. Transverse dimensional changes in intercanine, interpremolar, and intermolar dimensions, and the amount of crowding alleviated during the study period were assessed by comparison of pretreatment and posttreatment models. All measurements were made with a digital caliper (150 mm ISO 9001 electronic caliper, Tesa Technology, Renens, Switzerland). Sixty patients completed the study. After adjustment for pretreatment values, duration of treatment, and amount of crowding alleviated during the study period, bracket type had little effect on incisor inclination (P = 0.437) and positional changes (P = 0.35), and intercanine (P = 0.967), inter-first premolar (P = 0.495), and inter-second premolar (P = 0.905) dimensions. However, the self-ligating appliance produced slightly more expansion in the molar region, a difference that was statistically significant (P = 0.009). Pretreatment values for incisor inclination (P = 0.044) and transverse dimensions (P = 0.000) affected inclination and transverse changes, respectively, with proclination less likely when the labial segment was proclined at the outset and expansion unlikely during leveling and alignment in wider arches. Greater alleviation of crowding during the study period resulted in more incisor proclination (P = 0.000) and advancement (P = 0.000). There was little difference overall in the pattern of arch alignment and leveling related to the 2 preadjusted appliances. However, there was a statistically greater increase in intermolar width in the group treated with the self-ligating appliance, although the difference was only 0.91 mm.
Alhadlaq, Adel; Alkhadra, Thamer; El-Bialy, Tarek
2016-05-01
To compare anchorage condition in cases in which transpalatal arch was used to enhance anchorage in both continuous and segmented arch techniques. Twenty cases that required first premolar extraction for orthodontic treatment and transpalatal arch to enhance anchorage were included in this study. Ten cases were treated using the continuous arch technique, while the other 10 cases were treated using 0.019 × 0.025-inch TMA T-loops with posterior anchorage bend according to the Burstone and Marcotte description. Lateral cephalometric analysis of before and after canine retraction was performed using Ricketts analysis to measure the anteroposterior position of the upper first molar to the vertical line from the Pt point. Data were analyzed using an independent sample t-test. There was a statistically significant forward movement of the upper first molar in cases treated by continuous arch mechanics (4.5 ± 3.0 mm) compared with segmented arch mechanics (-0.7 ± 1.4 mm; P = .01). The posterior anchorage bend to T-loop used to retract the maxillary canine can enhance anchorage during maxillary canine retraction.
Borges, Cláudia dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival
2013-01-01
OBJECTIVE : Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. METHODS : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. RESULTS : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) Conclusion: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series. PMID:24453656
Code of Federal Regulations, 2010 CFR
2010-04-01
... inflammation associated with osteoarthritis in tarsal, carpal, metacarpophalangeal, metatarsophalangeal, and proximal interphalangeal (hock, knee, fetlock and pastern) joints. (3) Limitations. Do not use in horses...
Amer, Kamil M; Mur, Taha; Amer, Kamal; Ilyas, Asif M
2017-05-01
The utilization of surgical simulation continues to grow in medical training. The TouchSurgery application (app) is a new interactive virtual reality smartphone- or tablet-based app that offers a step-by-step tutorial and simulation for the execution of various operations. The purpose of this study was to compare the efficacy of the app versus traditional teaching modalities utilizing the "Carpal Tunnel Surgery" module. We hypothesized that users of the app would score higher than those using the traditional education medium indicating higher understanding of the steps of surgery. A total of 100 medical students were recruited to participate. The control group (n = 50) consisted of students learning about carpal tunnel release surgery using a video lecture utilizing slides. The study group (n = 50) consisted of students learning the procedure through the app. The content covered was identical in both groups but delivered through the different mediums. Outcome measures included comparison of test scores and overall app satisfaction. Test scores in the study group (89.3%) using the app were significantly higher than those in the control group (75.6%). Students in the study group rated the overall content validity, quality of graphics, ease of use, and usefulness to surgery preparation as very high (4.8 of 5). Students utilizing the app performed better on a standardized test examining the steps of a carpal tunnel release than those using a traditional teaching modality. The study findings lend support for the use of the app for medical students to prepare for and learn the steps for various surgical procedures. This study provides useful information on surgical simulation, which can be utilized to educate trainees for new procedures. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Chung, Vincent C H; Ho, Robin S T; Liu, Siya; Chong, Marc K C; Leung, Albert W N; Yip, Benjamin H K; Griffiths, Sian M; Zee, Benny C Y; Wu, Justin C Y; Sit, Regina W S; Lau, Alexander Y L; Wong, Samuel Y S
2016-09-06
The effectiveness of acupuncture for managing carpal tunnel syndrome is uncertain, particularly in patients already receiving conventional treatments (e.g., splinting). We aimed to assess the effects of electroacupuncture combined with splinting. We conducted a randomized parallel-group assessor-blinded 2-arm trial on patients with clinically diagnosed primary carpal tunnel syndrome. The treatment group was offered 13 sessions of electroacupuncture over 17 weeks. The treatment and control groups both received continuous nocturnal wrist splinting. Of 181 participants randomly assigned to electroacupuncture combined with splinting (n = 90) or splinting alone (n = 91), 174 (96.1%) completed all follow-up. The electroacupuncture group showed greater improvements at 17 weeks in symptoms (primary outcome of Symptom Severity Scale score mean difference [MD] -0.20, 95% confidence interval [CI] -0.36 to -0.03), disability (Disability of Arm, Shoulder and Hand Questionnaire score MD -6.72, 95% CI -10.9 to -2.57), function (Functional Status Scale score MD -0.22, 95% CI -0.38 to -0.05), dexterity (time to complete blinded pick-up test MD -6.13 seconds, 95% CI -10.6 to -1.63) and maximal tip pinch strength (MD 1.17 lb, 95% CI 0.48 to 1.86). Differences between groups were small and clinically unimportant for reduction in pain (numerical rating scale -0.70, 95% CI -1.34 to -0.06), and not significant for sensation (first finger monofilament test -0.08 mm, 95% CI -0.22 to 0.06). For patients with primary carpal tunnel syndrome, chronic mild to moderate symptoms and no indication for surgery, electroacupuncture produces small changes in symptoms, disability, function, dexterity and pinch strength when added to nocturnal splinting. Chinese Clinical Trial Register no. ChiCTR-TRC-11001655 (www.chictr.org.cn/showprojen.aspx?proj=7890); subsequently deposited in the World Health Organization International Clinical Trials Registry Platform (apps.who.int/trialsearch/Trial2.aspx?TrialID=ChiCTR-TRC-11001655). © 2016 Canadian Medical Association or its licensors.
2011-01-01
Background Several clinical measures of sensory and motor function are used alongside patient-rated questionnaires to assess outcomes of carpal tunnel decompression. However there is a lack of evidence regarding which clinical tests are most responsive to clinically important change over time. Methods In a prospective cohort study 63 patients undergoing carpal tunnel decompression were assessed using standardised clinician-derived and patient reported outcomes before surgery, at 4 and 8 months follow up. Clinical sensory assessments included: touch threshold with monofilaments (WEST), shape-texture identification (STI™ test), static two-point discrimination (Mackinnon-Dellon Disk-Criminator) and the locognosia test. Motor assessments included: grip and tripod pinch strength using a digital grip analyser (MIE), manual muscle testing of abductor pollicis brevis and opponens pollicis using the Rotterdam Intrinsic Handheld Myometer (RIHM). The Boston Carpal Tunnel Questionnaire (BCTQ) was used as a patient rated outcome measure. Results Relative responsiveness at 4 months was highest for the BCTQ symptom severity scale with moderate to large effects sizes (ES = -1.43) followed by the BCTQ function scale (ES = -0.71). The WEST and STI™ were the most responsive sensory tests at 4 months showing moderate effect sizes (WEST ES = 0.55, STI ES = 0.52). Grip and pinch strength had a relatively higher responsiveness compared to thenar muscle strength but effect sizes for all motor tests were very small (ES ≤0.10) or negative indicating a decline compared to baseline in some patients. Conclusions For clinical assessment of sensibility touch threshold assessed by monofilaments (WEST) and tactile gnosis measured with the STI™ test are the most responsive tests and are recommended for future studies. The use of handheld myometry (RIHM) for manual muscle testing, despite more specifically targeting thenar muscles, was less responsive than grip or tripod pinch testing using the digital grip analyser (MIE). When assessing power and pinch strength the effect of other concomitant conditions such as degenerative joint disease on strength needs to be considered. PMID:22032626
Nas, Kemal; Kilinç, Faruk; Tasdemir, Nebahat; Bozkurt, Mehtap; Yildiz, Ismail
2015-01-01
Introduction Carpal tunnel syndrome (CTS) is one of the most common entrapment neuropathies of the upper limbs. It results from compromised median nerve function of the wrist that is caused by increased pressure in the carpal tunnel. Repetitive use of the hand and wrist, obesity, pregnancy, rheumatoid diseases, trauma and endocrinopathies are some of the risk factors for CTS. Aim The purpose of this study was to find out whether patients with diabetes mellitus (DM), hypothyroidism and acromegaly have an increased incidence of carpal tunnel syndrome compared to each other and normal population. Materials and Methods Patients were assigned into three groups as follows: patients with type II DM n: 100, patients with hypothyroidism n:48 and patients with acromegaly n:36. In addition, 50 healthy individuals were included in the study as control subjects. Patients were asked if they had any pain, symptoms of paraesthesia and numbness. Patients with peripheral neuropathy were excluded from the study. Boston Symptom Severity Scale and Functional Capacity Scale were used to assess symptom severity and functional capacity. CTS was investigated by performing electrophysiological study for both hands. Results The incidence of CTS was significantly higher in all three groups compared to the control group (p>0.05). In addition, the incidence of CTS was significantly higher in the DM group compared to the hypothyroid and acromegaly groups (p<0.001). The incidence of bilateral CTS in the DM group was significantly higher compared to both hypothyroid and acromegaly groups and the control group (p<0.001). Conclusion CTS has a higher incidence in DM, hypothyroid and acromegaly patients compared to healthy individuals. Clinicians should be careful about development of CTS in DM, hypothyroidism and acromegaly. They should adopt a multidisciplinary approach and co-operate with the psychiatrist. PMID:26266148
Nourbakhsh, Mohammad Reza; Bell, Thomas J; Martin, Jason Benson; Arab, Amir Massoud
2016-11-01
Biofield treatments have been used for pain control in patients with cancer and chronic pain. However, research on the effect of biofield treatment on specific somatic disorders is lacking. This study intends to investigate the effect of oscillating biofield therapy (OBFT) on symptoms of carpal tunnel syndrome. Randomized, placebo-controlled, double-blind study. Thirty patients with chronic carpal tunnel syndrome participated in the study. Patients were randomly assigned to active or placebo treatment groups. Those in the treatment group received six sessions of OBFT with intention to treat during a period of 2 weeks. Patients in the placebo group had the same number of treatment sessions with mock OBFT treatment. The Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire; Symptom Severity Scale (SSS); and Functional Status Scale (FSS) were used for outcome assessment. Both clinically and statistically significant changes in intensity of pain with activity (95% confidence interval [CI], 2.5-4.2; p = 0.000), night pain (p = 0.000, 95% CI, 3.2-5.7), DASH questionnaire (95% CI, 12.0-21.9; p = 0.000), SSS (95% CI, 0.64-1.15; p = 0.003), and FSS (95% CI, 0.41-0.97; p = 0.029) were found between the treatment and placebo groups. Statistically significant reduction in number of patients with positive results on the Phalen test (87%; p = 0.000), Tinel sign (73%; p = 0.000), and hand paresthesia (80%; p = 0.000) was noted in the treatment group. During 6-month follow-up, 86% of patients in the treatment group remained pain free and had no functional limitations. OBFT can be a viable and effective treatment for improving symptoms and functional limitations associated with chronic carpal tunnel syndrome.
Bell, Thomas J.; Martin, Jason Benson; Arab, Amir Massoud
2016-01-01
Abstract Objectives: Biofield treatments have been used for pain control in patients with cancer and chronic pain. However, research on the effect of biofield treatment on specific somatic disorders is lacking. This study intends to investigate the effect of oscillating biofield therapy (OBFT) on symptoms of carpal tunnel syndrome. Design: Randomized, placebo-controlled, double-blind study. Participants: Thirty patients with chronic carpal tunnel syndrome participated in the study. Intervention: Patients were randomly assigned to active or placebo treatment groups. Those in the treatment group received six sessions of OBFT with intention to treat during a period of 2 weeks. Patients in the placebo group had the same number of treatment sessions with mock OBFT treatment. Outcome measure: The Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire; Symptom Severity Scale (SSS); and Functional Status Scale (FSS) were used for outcome assessment. Results: Both clinically and statistically significant changes in intensity of pain with activity (95% confidence interval [CI], 2.5–4.2; p = 0.000), night pain (p = 0.000, 95% CI, 3.2–5.7), DASH questionnaire (95% CI, 12.0–21.9; p = 0.000), SSS (95% CI, 0.64–1.15; p = 0.003), and FSS (95% CI, 0.41–0.97; p = 0.029) were found between the treatment and placebo groups. Statistically significant reduction in number of patients with positive results on the Phalen test (87%; p = 0.000), Tinel sign (73%; p = 0.000), and hand paresthesia (80%; p = 0.000) was noted in the treatment group. During 6-month follow-up, 86% of patients in the treatment group remained pain free and had no functional limitations. Conclusion: OBFT can be a viable and effective treatment for improving symptoms and functional limitations associated with chronic carpal tunnel syndrome. PMID:27487406
Analysis of rotational and sliding collapse modes of masonry arches via Durand-Claye's method
NASA Astrophysics Data System (ADS)
Barsotti, Riccardo; Aita, Danila; Bennati, Stefano
2017-11-01
In this paper the mechanical behavior of circular and pointed masonry arches subject to their own weight is examined in order to determine their collapse modes. Different arch's shapes and thicknesses are considered; the influence of the friction coefficient on the arch collapse is analyzed as well. The safety level of arches is investigated by suitably reworking in semi-analytical form the stability area graphical method proposed by a renowned 19th century French scholar, Durand-Claye. Our analysis enables accounting for any given eccentricity of the thrust at the crown; furthermore, also the strength of masonry is taken into account. According to Durand-Claye's method, the arch is safe if along any given joint both the bending moment and the shear force do not exceed some given limit values. It is shown that attainment of a limit condition according to Durand-Claye corresponds to the onset of a collapse mechanism characterized by either relative rotation or sliding between masonry units. All possible symmetric collapse modes for an arch are thoroughly described. As it was expected, pointed and circular arches show different collapse behaviors. Limit values of arch thickness and friction coefficient are assessed. The results obtained are compared with those given by Michon in 1857.
Pregnancy Leads to Lasting Changes in Foot Structure
Segal, Neil A.; Boyer, Elizabeth R.; Teran-Yengle, Patricia; Glass, Natalie; Hillstrom, Howard J.; Yack, H. John
2013-01-01
Objective Women are disproportionately affected by musculoskeletal disorders. Parous women appear to be at particularly elevated risk for structural and functional changes in the lower limbs. The combination of increased weight on joints with potentially greater laxity during pregnancy could lead to permanent structural changes in feet. Although arches may become lax during pregnancy, it is unknown whether changes persist. The objective of this study was to determine whether arch height loss persists postpartum. Design Forty-nine women completed this longitudinal study. Static and dynamic arch measurements were collected in first-trimester and at 19 weeks postpartum. Linear mixed models were used to determine whether outcome measures significantly changed overall or by parity. Results Arch height and rigidity index significantly decreased, with concomitant increases in foot length and arch drop. The first pregnancy accounted for the reduction in arch rigidity and increases in foot length and arch drop. No changes were detected in the center of pressure excursion index. Conclusions Pregnancy appears to be associated with a permanent loss of arch height and the first pregnancy may be the most significant. These changes in the feet could contribute to the increased risk for musculoskeletal disorders in women. Further research should assess the efficacy of rehabilitative interventions for prevention of pregnancy-related arch drop. PMID:23117270
Huang, Yonghui; Yang, Zhicheng; Liu, Airong; Fu, Jiyang
2018-05-28
The buckling behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) shallow arches with elastic rotational constraints under uniform radial load is investigated in this paper. The nonlinear equilibrium equation of the FG-GPLRC shallow arch with elastic rotational constraints under uniform radial load is established using the Halpin-Tsai micromechanics model and the principle of virtual work, from which the critical buckling load of FG-GPLRC shallow arches with elastic rotational constraints can be obtained. This paper gives special attention to the effect of the GPL distribution pattern, weight fraction, geometric parameters, and the constraint stiffness on the buckling load. The numerical results show that all of the FG-GPLRC shallow arches with elastic rotational constraints have a higher buckling load-carrying capacity compared to the pure epoxy arch, and arches of the distribution pattern X have the highest buckling load among four distribution patterns. When the GPL weight fraction is constant, the thinner and larger GPL can provide the better reinforcing effect to the FG-GPLRC shallow arch. However, when the value of the aspect ratio is greater than 4, the flakiness ratio is greater than 103, and the effect of GPL's dimensions on the buckling load of the FG-GPLRC shallow arch is less significant. In addition, the buckling model of FG-GPLRC shallow arch with elastic rotational constraints is changed as the GPL distribution patterns or the constraint stiffness changes. It is expected that the method and the results that are presented in this paper will be useful as a reference for the stability design of this type of arch in the future.
Feigenbaum, Luis A; Roach, Kathryn E; Kaplan, Lee D; Lesniak, Bryson; Cunningham, Sean
2013-11-01
Case-control. The specific aim of this study was to examine the association between abnormal foot arch postures and a history of shoulder or elbow surgery in baseball pitchers. Pitching a baseball generates forces throughout the musculoskeletal structures of the upper and lower limbs. Structures such as the longitudinal arch of the foot are adaptable to stresses over time. Repeated pitching-related stresses may contribute to acquiring abnormal foot arch postures. Inversely, congenitally abnormal foot arch posture may lead to altered stresses of the upper limb during pitching. A convenience sample of 77 pitchers was recruited from a Division I university team and a professional baseball franchise. Subjects who had a history of shoulder or elbow surgery to the pitching arm were classified as cases. Subjects who met the criteria for classification of pes planus or pes cavus based on longitudinal arch angle were classified as having abnormal foot arch posture. Odds ratios were calculated to examine the association between abnormal foot arch posture and pitching-arm injury requiring surgery. Twenty-three subjects were classified as cases. The odds of being a case were 3.4 (95% confidence interval: 1.2, 9.6; P = .02) times greater for subjects with abnormal foot arch posture and 2.9 (95% confidence interval: 1.0, 8.1; P = .04) times greater for subjects with abnormal foot posture on the lunge leg. Abnormal foot arch posture and a surgical history in the pitching shoulder or elbow may be associated. Because the foot and its arches are adaptable and change over time, the pathomechanics of this association should be further explored.
Abnormal aortic arch morphology in Turner syndrome patients is a risk factor for hypertension.
De Groote, Katya; Devos, Daniël; Van Herck, Koen; Demulier, Laurent; Buysse, Wesley; De Schepper, Jean; De Wolf, Daniël
2015-09-01
Hypertension in Turner syndrome (TS) is a multifactorial, highly prevalent and significant problem that warrants timely diagnosis and rigorous treatment. The objective of this study was to investigate the association between abnormal aortic arch morphology and hypertension in adult TS patients. This was a single centre retrospective study in 74 adult TS patients (age 29.41 ± 8.91 years) who underwent a routine cardiac MRI. Patients were assigned to the hypertensive group (N = 31) if blood pressure exceeded 140/90 mmHg and/or if they were treated with antihypertensive medication. Aortic arch morphology was evaluated on MRI images and initially assigned as normal (N = 54) or abnormal (N = 20), based on the curve of the transverse arch and the distance between the left common carotid-left subclavian artery. We additionally used a new more objective method to describe aortic arch abnormality in TS by determination of the relative position of the highest point of the transverse arch (AoHP). Logistic regression analysis showed that hypertension is significantly and independently associated with age, BMI and abnormal arch morphology, with a larger effect size for the new AoHP method than for the classical method. TS patients with hypertension and abnormal arch morphology more often had dilatation of the ascending aorta. There is a significant association between abnormal arch morphology and hypertension in TS patients, independent of age and BMI, and not related to other structural heart disease. We suggest that aortic arch morphology should be included in the risk stratification for hypertension in TS and propose a new quantitative method to express aortic arch morphology.
Hunter, Michael P; Prince, Victoria E
2002-07-15
The pharyngeal arches are one of the defining features of the vertebrates, with the first arch forming the mandibles of the jaw and the second forming jaw support structures. The cartilaginous elements of each arch are formed from separate migratory neural crest cell streams, which derive from the dorsal aspect of the neural tube. The second and more posterior crest streams are characterized by specific Hox gene expression. The zebrafish has a larger overall number of Hox genes than the tetrapod vertebrates, as the result of a duplication event in its lineage. However, in both zebrafish and mouse, there are just two members of Hox paralogue group 2 (PG2): Hoxa2 and Hoxb2. Here, we show that morpholino-mediated "knock-down" of both zebrafish Hox PG2 genes results in major defects in second pharyngeal arch cartilages, involving replacement of ventral elements with a mirror-image duplication of first arch structures, and accompanying changes to pharyngeal musculature. In the mouse, null mutants of Hoxa2 have revealed that this single Hox gene is required for normal second arch patterning. By contrast, loss-of-function of either zebrafish Hox PG2 gene individually has no phenotypic consequence, showing that these two genes function redundantly to confer proper pattern to the second pharyngeal arch. We have also used hoxb1a mis-expression to induce localized ectopic expression of zebrafish Hox PG2 genes in the first arch; using this strategy, we find that ectopic expression of either Hox PG2 gene can confer second arch identity onto first arch structures, suggesting that the zebrafish Hox PG2 genes act as "selector genes." 2002 Elsevier Science (USA).
Park, Sung Jun; Jeon, Bo Bae; Kim, Hee Jung
2018-01-01
Background For aortic-arch repair, moderate hypothermic circulatory arrest (HCA) have shown favorable outcomes over conventional deep HCA when coupled with antegrade cerebral perfusion (ACP); however, recent studies have shown that ACP may not be essential when circulatory arrest time is less than 30 minutes. This study aims to evaluate the stratified arch repair strategy of moderate HCA with or without ACP based on the extent of procedure. Methods Consecutive 138 patients (63 female; mean age, 60.2±15.7 years) undergoing open arch repair due to acute aortic syndrome (n=69) or chronic aneurysm (n=69) from January 2012 through April 2017 were enrolled in this study. Stratified neuroprotective strategy was employed according to the extent of repair: hemi-arch repair (n=93) was performed under moderated HCA alone and total-arch repair (n=45) under moderate HCA combined with unilateral ACP. Results Median total circulatory arrest and total procedural times were 8.0 minutes [interquartile range (IQR), 6.0–10.0] and 233.0 minutes (IQR, 196.0–290.0 minutes), respectively in the hemi-arch group, and 25.0 minutes (IQR, 12.0–33.0 minutes) and 349.0 minutes (IQR, 276.0–406.0 minutes), respectively in the total-arch group. Early mortality occurred in 2 patients (1.4%) who underwent hemi-arch repair for acute aortic dissection. There was no permanent neurological injury, but 2 cases (1.4%) of temporary neurologic deficit in the hemi-arch group. Other complications included re-exploration for bleeding in 6 (4.3%), postoperative extracorporeal life support in 5 (3.6%) and new-dialysis in 6 (4.3%). Conclusions Stratified cerebral perfusion strategy using moderate hypothermia for aortic-arch surgery based on the extent of arch repair showed satisfactory safety and reasonable efficiency. PMID:29707342
2016-01-01
Background Certain hand activities cause deformation and displacement of the median nerve at the carpal tunnel due to the gliding motion of tendons surrounding it. As smartphone usage escalates, this raises the public’s concern whether hand activities while using smartphones can lead to median nerve problems. Objective The aims of this study were to 1) develop kinematic graphs and 2) investigate the associated deformation and rotational information of median nerve in the carpal tunnel during hand activities. Methods Dominant wrists of 30 young adults were examined with ultrasonography by placing a transducer transversely on their wrist crease. Ultrasound video clips were recorded when the subject performing 1) thumb opposition with the wrist in neutral position, 2) thumb opposition with the wrist in ulnar deviation and 3) pinch grip with the wrist in neutral position. Six still images that were separated by 0.2-second intervals were then captured from the ultrasound video for the determination of 1) cross-sectional area (CSA), 2) flattening ratio (FR), 3) rotational displacement (RD) and 4) translational displacement (TD) of median nerve in the carpal tunnel, and these collected information of deformation, rotational and displacement of median nerve were compared between 1) two successive time points during a single hand activity and 2) different hand motions at the same time point. Finally, kinematic graphs were constructed to demonstrate the mobility of median nerve during different hand activities. Results Performing different hand activities during this study led to a gradual reduction in CSA of the median nerve, with thumb opposition together with the wrist in ulnar deviation causing the greatest extent of deformation of the median nerve. Thumb opposition with the wrist in ulnar deviation also led to the largest extent of TD when compared to the other two hand activities of this study. Kinematic graphs showed that the motion pathways of median nerve during different hand activities were complex. Conclusion We observed that the median nerve in the carpal tunnel was rotated, deformed and displaced during the hand activities that people may be performed when using a smartphone, suggesting an increased risk of carpal tunnel syndrome (CTS). In addition, the kinematic graphs of median nerve developed in the present study provide new clues for further studies on the pathophysiology of CTS, and alerting smartphone users to establish proper postural habits when using handheld electronic devices. PMID:27367447
[Persistence of the 5th aortic arch associated with interruption of the aortic arch].
Houssa, Mahdi Ait; Atmani, Noureddine; Bamous, Mehdi; Abdou, Abdessamad; Nya, Fouad; Seghrouchni, Anis; Amahzoune, Brahim; El Bekkali, Youssef; Drissi, Mohamed; Boulahya, Abdelatif
2017-01-01
We report a case of persistence of the 5th aortic arch associated with total interruption of the aortic arch. This clinical case shows the diagnostic pitfall of the persistence of the 5th aortic arch and its beneficial hemodynamic effect. Preoperative clinical picture was misleading, due to the persistence of femoral pulses and clinical signs of left-to-right shunt via a wide ductus arteriosus. The diagnosis was intraoperatively adjusted on the basis of blood pressure monitoring using catheter placed into the femoral artery.
Ball motion and sliding friction in an arched outer-race ball bearing
NASA Technical Reports Server (NTRS)
Hamrock, B. J.
1974-01-01
The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is analyzed. Fatigue life evaluations were made. The analysis is applied to a 150-millimeter-bore ball bearing. The results indicated that for high-speed light-load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be optimal. Also, for an arched bearing a considerable amount of spinning occurs at the outer-race contacts.
Double Aortic Arch With Previously Undescribed Head and Neck Vessel Branching.
Hashemi, Sassan; Parks, W James; Sallee, Denver; Slesnick, Timothy
2017-04-01
Vascular ring in the form of a double aortic arch is a rare anomaly that can cause airway compression. It occasionally occurs with unusual head and neck vessel branching. A 5-year-old boy with chronic respiratory symptoms was referred because of a tracheal indentation on his chest x-ray. Magnetic resonance imaging showed a double aortic arch with arch origins of a common carotid, vertebral, and subclavian on the right and internal and external carotids, vertebral, and subclavian arteries on the left. Our case represents, to our knowledge, the first report of a double aortic arch with 7 separate vessels arising from the transverse arches. Copyright © 2016 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.
... worker's wrist to maintain a natural position during work. Jobs can be rotated among workers. Employers can develop programs in ergonomics, the process of adapting workplace conditions and job ...
Examination of patients for carpal tunnel syndrome sensibility, provocative, and motor testing.
Palumbo, Carl F; Szabo, Robert M
2002-05-01
The value of a test for carpal tunnel syndrome (CTS) depends on the purpose of performing the test. When screening a large population with a low prevalence for CTS, a test with a high sensitivity is needed so that no possible case goes undetected. However, in order to establish a diagnosis, a more specific test is required. Using a combination of physical examination techniques, including sensibility and provocative testing, the probability of correctly diagnosing CTS without relying on electrodiagnostic studies can be very high. Because CTS is a clinical syndrome, the diagnosis should be made on clinical grounds. Electrodiagnosis is extremely important, however, in its ability to objectively document median nerve slowing and eliminate other competing differential diagnoses.
Image analysis for skeletal evaluation of carpal bones
NASA Astrophysics Data System (ADS)
Ko, Chien-Chuan; Mao, Chi-Wu; Lin, Chi-Jen; Sun, Yung-Nien
1995-04-01
The assessment of bone age is an important field to the pediatric radiology. It provides very important information for treatment and prediction of skeletal growth in a developing child. So far, various computerized algorithms for automatically assessing the skeletal growth have been reported. Most of these methods made attempt to analyze the phalangeal growth. The most fundamental step in these automatic measurement methods is the image segmentation that extracts bones from soft-tissue and background. These automatic segmentation methods of hand radiographs can roughly be categorized into two main approaches that are edge and region based methods. This paper presents a region-based carpal-bone segmentation approach. It is organized into four stages: contrast enhancement, moment-preserving thresholding, morphological processing, and region-growing labeling.
McDonald, Kirsty A.; Stearne, Sarah M.; Alderson, Jacqueline A.; North, Ian; Pires, Neville J.; Rubenson, Jonas
2016-01-01
Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running. PMID:27054319
İnanç, Yılmaz; İnanç, Yusuf; Ay, Halil
2018-01-01
The aim of this study was to retrospectively evaluate the distribution of aortic arches, the relationship with demographic characteristics, and the results of carotid and vertebral artery stenting procedures in patients diagnosed with cerebrovascular disease through the intra-arterial digital subtraction angiography (DSA) technique. A retrospective examination was performed on 288 patients diagnosed with cerebrovascular disease, who underwent DSA in the Department of Neurology of Gaziantep University Medical Faculty and Kahramanmaraş¸ Sütçü Imam University Medical Faculty. The patients were examined in respect of demographic features and aortic arch anatomic structure characteristics. All demographic characteristics, DSA, carotid, and vertebral artery stent results were recorded. The patients comprised 60.1% males and 39.9% females with a mean age of 58.25 years. Type 2 aortic arch was found in 175 (60.7%) patients, Type 2 aortic arch in 99 (34.3%) patients, and Type 3 aortic arch in 14 (4.8%) patients. The right carotid artery stenosis rate was found to be higher in patients with Type 2 aortic arch ( P =0.013). When the patients were evaluated according to the presence of a bovine arch, there was no significant difference in terms of age, carotid, and vertebral artery lesions ( P >0.05). The aortic arch and its branching properties were not found to have a direct effect on increased risk of cerebrovascular disease or stenting rates. This study can be considered to raise awareness for new studies to demonstrate the effect of aortic arch anatomic differences on cerebrovascular diseases.
İnanç, Yılmaz; İnanç, Yusuf; Ay, Halil
2018-01-01
Purpose The aim of this study was to retrospectively evaluate the distribution of aortic arches, the relationship with demographic characteristics, and the results of carotid and vertebral artery stenting procedures in patients diagnosed with cerebrovascular disease through the intra-arterial digital subtraction angiography (DSA) technique. Methods A retrospective examination was performed on 288 patients diagnosed with cerebrovascular disease, who underwent DSA in the Department of Neurology of Gaziantep University Medical Faculty and Kahramanmaraş¸ Sütçü Imam University Medical Faculty. The patients were examined in respect of demographic features and aortic arch anatomic structure characteristics. All demographic characteristics, DSA, carotid, and vertebral artery stent results were recorded. Results The patients comprised 60.1% males and 39.9% females with a mean age of 58.25 years. Type 2 aortic arch was found in 175 (60.7%) patients, Type 2 aortic arch in 99 (34.3%) patients, and Type 3 aortic arch in 14 (4.8%) patients. The right carotid artery stenosis rate was found to be higher in patients with Type 2 aortic arch (P=0.013). When the patients were evaluated according to the presence of a bovine arch, there was no significant difference in terms of age, carotid, and vertebral artery lesions (P>0.05). Conclusion The aortic arch and its branching properties were not found to have a direct effect on increased risk of cerebrovascular disease or stenting rates. This study can be considered to raise awareness for new studies to demonstrate the effect of aortic arch anatomic differences on cerebrovascular diseases. PMID:29302189
Chen, Shing-Jye; Gielo-Perczak, Krystyna
2011-01-01
Arch supports commonly used to alleviate foot pain can impede the normal drop of medial longitudinal arch (MLA) thereby altering its function. The purpose of the study was to examine the effect of using arch supports on vertical ground reaction force (GRF) and center of pressure (COP) during simulated midstance while the foot was statically loaded. Ten healthy young subjects were recruited. Two dimensional (2D) analysis of the MLA was captured for both barefoot (BF) and arch support conditions before and after loading via a custom made weight loading apparatus. The foot was loaded and positioned to simulate the midstance phase of walking. Two-dimensional reflective markers demarcated the MLA and captured with the loaded foot on a force platform. The impeded MLA drop was compared between the unloaded BF, loaded BF and loaded arch support conditions. The vertical GRF, the anterior-posterior and the medial-lateral COP displacements were also measured in response to the impeded MLA by the arch supports. The arch supports impeded the MLA drop (p<0.05) and shifted the COP toward the medial side (p<0.05), specifically for the rearfoot (calcaneal segment region), but no changes were determined for the vertical GRF (p>0.05). The impedance of MLA drop by the arch support altered the pattern of the ML COP shift in the rearfoot region. The use of arch supports may not relieve painful foot conditions that are associated with excessive calcaneal eversion indicated by altering COP shifts in localized foot regions.
McDonald, Kirsty A; Stearne, Sarah M; Alderson, Jacqueline A; North, Ian; Pires, Neville J; Rubenson, Jonas
2016-01-01
Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running.
Origin and structural development of the LaSalle Arch, Louisiana
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lawless, P.N.
1990-05-01
The LaSalle arch is a basement high separating the Louisiana and Mississippi interior salt basins. Using reflection seismic data, an area located on the southern end of the LaSalle arch was shown to be composed of relict Paleozoic continental crust that was left behind and partially rifted during the breakup of Pangea during the Triassic. Rifting preferentially occurred to the north of a Paleozoic thrust fault nose, and crustal extension took place in a northeast-southwest direction. The LaSalle arch, as seen in post-Triassic stratigraphy, formed by a two-part process. The western limb developed syndepositionally due to differential subsidence, and themore » eastern limb developed due to relative regional tilting to the east after deposition of the Claibornian Sparta Formation. The LaSalle arch acted as only a minor impediment to sediment transport with a very low relief except during the Tayloran Stage of the Upper Cretaceous. A single truncational unconformity in post-Triassic stratigraphy is present in the Taylora Demopolis Formation, indicating a period of relatively major uplift by the LaSalle arch. This contrast, with the Sabine arch in eastern Texas; the Sabine arch experienced uplift during the Eagle Fordian and Sabinian stages. A recently proposed hypothesis calling for overthrusting in the Western Cordillera as the mechanism for uplift on the Sabine arch cannot explain movement of the LaSalle arch because horizontal stress would predict synchronous uplift of basement highs. A more satisfactory uplift mechanism calls upon lateral heat flow from the mantle as the driving force for uplift.« less
Body weight and the medial longitudinal foot arch: high-arched foot, a hidden problem?
Woźniacka, R; Bac, A; Matusik, S; Szczygieł, E; Ciszek, E
2013-05-01
This study had two objectives. First, to determine the prevalence of hollow (high-arched) and flat foot among primary school children in Cracow (Poland). Second, to evaluate the relationship between the type of medial longitudinal arch (MLA; determined by the Clarke's angle) and degree of fatness. The prevalence of underweight, overweight, and obesity was determined by means of IOTF cut-offs with respect to age and gender. A sample of 1,115 children (564 boys and 551 girls) aged between 3 and 13 years was analyzed. In all age groups, regardless of gender, high-arched foot was diagnosed in the majority of children. A distinct increase in the number of children with high-arched foot was observed between 7- and 8-year olds. Regardless of the gender, high-arched foot was more common among underweight children. In the group of obese children, the biggest differences were attributed to gender. High-arched foot was the most frequently observed among boys. In all gender and obesity level groups, the flat foot was more common among boys than among girls. High-arched foot is the most common foot defect among children 3-13 years old regardless of gender. Flat foot is least frequently observed in children 3-13 years old. A statistic correlation between MLA and adiposity is observed. Stronger correlation is observed among girls.
Effect of using truncated versus total foot length to calculate the arch height ratio.
McPoil, Thomas G; Cornwall, Mark W; Vicenzino, Bill; Teyhen, Deydre S; Molloy, Joseph M; Christie, Douglas S; Collins, Natalie
2008-12-01
The purpose of this study was to determine the arch height ratio in a large cohort of subjects as well as to assess the reliability and validity of the foot measurements utilized in the study. Eight hundred and fifty subjects, 393 women and 457 men, consented to participate in the study. The dorsal arch height, total foot length, and the truncated foot length were used to calculate two variations of the arch height ratio. In addition to determining within- and between-rater measurement reliability, radiographs were used to establish validity. The truncated arch height ratio can be estimated using the total foot length, unless toe deformities are present in the individual being assessed. All foot measurements had high levels of intra- and inter-rater reliability and the validity of measuring the dorsal arch height while standing with equal weight on both feet was established. This investigation provides normative values from a large cohort of healthy female and male subjects for two variations of the arch height ratio. The arch height ratio is a reliable and valid measurement that may prove useful to clinicians and researchers for the classification of foot posture.
Effect of arch length on the functional well-being of dentate adults.
Montero, J; Bravo, M; Hernández, L A; Dib, A
2009-05-01
The aim of this study was to assess the influence of arch length and the number of occlusal units on the oral functions and general satisfaction perceived by dentate adults without dentures who had all their aesthetic units intact. We performed an epidemiological study at randomly chosen health centres on populations of adults without dentures. The subjects (n = 624) were classified as complete dental arch (CDA), interrupted dental arch (IDA) or shortened dental arches (SDA), depending on the length and continuity of the dental arches. We gathered clinical data and data on functional ability and oral satisfaction, plotting them on a scale of 0-10. The individuals with a shortened dental arch were found to have longer-lasting, more frequent and more severe functional limitations upon chewing, smiling and speaking than those with a complete or interrupted arch. The prevalance rate ratio (95% CI) of functional limitations in the SDA group was higher than in the aggregated CDA-IDA group, the values ranging between 1.56 (1.22-12.01) as regards chewing and 2.35 (1.45-3.85) in the case of smiling. However, in general all groups were satisfied with their oral status.
He, Wei; Sun, Yuchun; Tian, Kaiyue; Xie, Xiaoyan; Wang, Xiaoxia; Li, Zili
2015-11-01
The aim of the present study was to evaluate the feasibility of the design and fabrication of a novel arch bar using 3-dimensional printing. Furthermore, the study assessed its use in a preliminary clinical study of intermaxillary fixation. Seven patients who met the inclusion criteria were enrolled in the present study. Plaster dental casts were created of each patient and scanned using cone-beam computed tomography to obtain digital casts. Computer-aided design software was then used to complete the virtual building of the arch bars, which were manufactured using 3-dimensional printing and a cobalt-chrome alloy. The clinical results were observed after the arch bars were fixed to the dentition with steel wires. The arch bar contacted the dentition with a "surface-to-surface" pattern. The utility of these novel arch bars was verified by successfully fitting them to the dental arches of the patients. All the patients achieved their desired occlusion. The results of the present study have illustrated that this digital method is feasible for constructing a novel arch bar, showing promise for clinical use. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Computed tomographic analysis of calvarial hyperostosis in captive lions.
Gross-Tsubery, Ruth; Chai, Orit; Shilo, Yael; Miara, Limor; Horowitz, Igal H; Shmueli, Ayelet; Aizenberg, Itzhak; Hoffman, Chen; Reifen, Ram; Shamir, Merav H
2010-01-01
Osseous malformations in the skull and cervical vertebrae of lions in captivity are believed to be caused by hypovitaminosis A. These often lead to severe neurologic abnormalities and may result in death. We describe the characterization of these abnormalities based on computed tomography (CT). CT images of two affected and three healthy lions were compared with define the normal anatomy of the skull and cervical vertebrae and provide information regarding the aforementioned osseous malformations. Because bone structure is influenced by various factors other than the aforementioned disease, all values were divided by the skull width that was not affected. The calculated ratios were compared and the most pronounced abnormalities in the affected lions were, narrowing of the foramen magnum, thickening of the tentorium osseus cerebelli and thickening of the dorsal arch of the atlas. CT is useful for detection of the calvarial abnormalities in lions and may be useful in further defining this syndrome.
A new way of analyzing occlusion 3 dimensionally.
Hayasaki, Haruaki; Martins, Renato Parsekian; Gandini, Luiz Gonzaga; Saitoh, Issei; Nonaka, Kazuaki
2005-07-01
This article introduces a new method for 3-dimensional dental cast analysis, by using a mechanical 3-dimensional digitizer, MicroScribe 3DX (Immersion, San Jose, Calif), and TIGARO software (not yet released, but available from the author at hayasaki@dent.kyushu-u.ac.jp ). By digitizing points on the model, multiple measurements can be made, including tooth dimensions; arch length, width, and perimeter; curve of Spee; overjet and overbite; and anteroposterior discrepancy. The bias of the system can be evaluated by comparing the distance between 2 points as determined by the new system and as measured with digital calipers. Fifteen pairs of models were measured digitally and manually, and the bias was evaluated by comparing the variances of both methods and checking for the type of error obtained by each method. No systematic errors were found. The results showed that the method is accurate, and it can be applied to both clinical practice and research.
Modified protrusion arch for anterior crossbite correction - a case report.
Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh
2013-01-01
Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.
Optimization of shallow arches against instability using sensitivity derivatives
NASA Technical Reports Server (NTRS)
Kamat, Manohar P.
1987-01-01
The author discusses the problem of optimization of shallow frame structures which involve a coupling of axial and bending responses. A shallow arch of a given shape and of given weight is optimized such that its limit point load is maximized. The cross-sectional area, A(x) and the moment of inertia, I(x) of the arch obey the relationship I(x) = rho A(x) sup n, n = 1,2,3 and rho is a specified constant. Analysis of the arch for its limit point calculation involves a geometric nonlinear analysis which is performed using a corotational formulation. The optimization is carried out using a second-order projected Lagrangian algorithm and the sensitivity derivatives of the critical load parameter with respect to the areas of the finite elements of the arch are calculated using implicit differentation. Results are presented for an arch of a specified rise to span ratio under two different loadings and the limitations of the approach for the intermediate rise arches are addressed.
Miyamoto, Ikuya; Yoshida, Kazuya; Bessho, Kazuhisa
2009-04-01
A shortened dental arch without posterior occlusal support has been thought to maintain sufficient oral function. The mechanism of occlusal adaptation with a shortened dental arch is unclear. For a better understanding of the effects of molar teeth on brain function, the authors combined experimentally-shortened dental arches and a neuro-imaging technique. Regional cerebral blood volume was measured using near-infrared optical topography during maximum voluntary clenching tasks from 10 subjects on individually fabricated oral appliances, which can create experimentally complete and shortened dental arches. Results suggested that clenching on the complete dental arch showed a significantly higher brain blood volume than that on the shortened dental arch. Moreover, there were no differences between the two splints in the latency to the maximum oxyhemoglobin concentration. These findings suggest that occlusal status is closely related to brain blood flow and lack of occlusal molar support rapidly reduces cerebral blood volume in the maximum voluntary clenching condition.
Developmental evidence for serial homology of the vertebrate jaw and gill arch skeleton
Gillis, J. Andrew; Modrell, Melinda S.; Baker, Clare V. H.
2013-01-01
Gegenbaur’s classical hypothesis of jaw-gill arch serial homology is widely cited, but remains unsupported by either paleontological evidence (e.g. a series of fossils reflecting the stepwise transformation of a gill arch into a jaw) or developmental genetic data (e.g. shared molecular mechanisms underlying segment identity in the mandibular, hyoid and gill arch endoskeletons). Here we show that nested expression of Dlx genes – the “Dlx code” that specifies upper and lower jaw identity in mammals and teleosts – is a primitive feature of the mandibular, hyoid and gill arches of jawed vertebrates. Using fate-mapping techniques, we demonstrate that the principal dorsal and ventral endoskeletal segments of the jaw, hyoid and gill arches of the skate Leucoraja erinacea derive from molecularly equivalent mesenchymal domains of combinatorial Dlx gene expression. Our data suggest that vertebrate jaw, hyoid and gill arch cartilages are serially homologous, and were primitively patterned dorsoventrally by a common Dlx blueprint. PMID:23385581
Takayama, Kohei; Ooto, Sotaro; Hangai, Masanori; Arakawa, Naoko; Oshima, Susumu; Shibata, Naohisa; Hanebuchi, Masaaki; Inoue, Takashi; Yoshimura, Nagahisa
2012-01-01
To conduct high-resolution imaging of the retinal nerve fiber layer (RNFL) in normal eyes using adaptive optics scanning laser ophthalmoscopy (AO-SLO). AO-SLO images were obtained in 20 normal eyes at multiple locations in the posterior polar area and a circular path with a 3-4-mm diameter around the optic disc. For each eye, images focused on the RNFL were recorded and a montage of AO-SLO images was created. AO-SLO images for all eyes showed many hyperreflective bundles in the RNFL. Hyperreflective bundles above or below the fovea were seen in an arch from the temporal periphery on either side of a horizontal dividing line to the optic disc. The dark lines among the hyperreflective bundles were narrower around the optic disc compared with those in the temporal raphe. The hyperreflective bundles corresponded with the direction of the striations on SLO red-free images. The resolution and contrast of the bundles were much higher in AO-SLO images than in red-free fundus photography or SLO red-free images. The mean hyperreflective bundle width around the optic disc had a double-humped shape; the bundles at the temporal and nasal sides of the optic disc were narrower than those above and below the optic disc (P<0.001). RNFL thickness obtained by optical coherence tomography correlated with the hyperreflective bundle widths on AO-SLO (P<0.001) AO-SLO revealed hyperreflective bundles and dark lines in the RNFL, believed to be retinal nerve fiber bundles and Müller cell septa. The widths of the nerve fiber bundles appear to be proportional to the RNFL thickness at equivalent distances from the optic disc.
Calvarial periosteal graft for second-stage cleft palate surgery: a preliminary report.
Neiva, Cecilia; Dakpe, Stephanie; Gbaguidi, Cica; Testelin, Sylvie; Devauchelle, Bernard
2014-07-01
The objectives of cleft palate surgery are to achieve optimal outcomes regarding speech development, hearing, maxillary arch development and facial skull growth. Early two-stage cleft palate repair has been the most recent protocol of choice to achieve good maxillary arch growth without compromising speech development. Hard palate closure occurs within one year of soft palate surgery. However, in some cases the residual hard palate cleft width is larger than 15 mm at the age of two. As previously reported, integrated speech development starts around that age and it is a challenge since we know that early mobilization of the mucoperiosteum interferes with normal facial growth on the long-term. In children with large residual hard palate clefts at the age 2, we report the use of calvarial periosteal grafts to close the cleft. With a retrospective 6-year study (2006-2012) we first analyzed the outcomes regarding impermeability of hard palate closure on 45 patients who at the age of two presented a residual cleft of the hard palate larger than 15 mm and benefited from a periosteal graft. We then studied the maxillary growth in these children. In order to compare long-term results, we included 14 patients (age range: 8-20) treated between 1994 & 2006. Two analyses were conducted, the first one on dental casts from birth to the age of 6 and the other one based on lateral cephalograms following Delaire's principles and TRIDIM software. After the systematic cephalometric analysis of 14 patients, we found no evidence of retrognathia or Class 3 dental malocclusion. In the population of 45 children who benefited from calvarial periosteal grafts the rate of palate fistula was 17% vs. 10% in the overall series. Despite major advances in understanding cleft defects, the issues of timing and choice of the surgical procedure remain widely debated. In second-stage surgery for hard palate closure, using a calvarial periosteal graft could be the solution for large residual clefts without compromising adequate speech development by encouraging proper maxillary arch growth. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Agarwal, Shiv Shankar; Nehra, Karan; Sharma, Mohit; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar
2014-10-31
This cross-sectional retrospective study was conducted to determine association between breastfeeding duration, non-nutritive sucking habits, dental arch transverse diameters, posterior crossbite and anterior open bite in deciduous dentition. 415 children (228 males and 187 females), 4 to 6 years old, from a mixed Indian population were clinically examined. Based on written questionnaire answered by parents, children were divided into two groups: group 1 (breastfed for <6 months (n = 158)) and group 2 (breastfed for ≥6 months (n = 257)). The associations were analysed using chi-square test (P < 0.05 taken as statistically significant). Odds ratio (OR) was calculated to determine the strength of associations tested. Multivariate logistic regression analysis was done for obtaining independent predictors of posterior crossbite and maxillary and mandibular IMD (Inter-molar distance) and ICD (Inter-canine distance). Non-nutritive sucking (NNS) was present in 15.18% children (20.3% in group 1 as compared to 12.1% in group 2 (P = 0.024)). The average ICD and IMD in maxilla and average IMD in mandible were significantly higher among group 2 as compared to group 1 (P < 0.01). In mandible, average ICD did not differ significantly between the two groups (P = 0.342). The distribution of anterior open bite did not differ significantly between the two groups (P = 0.865). The distribution of posterior crossbite was significantly different between the two groups (P = 0.001). OR assessment (OR = 1.852) revealed that group 1 had almost twofold higher prevalence of NNS habits than group 2. Multivariate logistic regression analysis revealed that the first group had independently fourfold increased risk of developing crossbite compared to the second group (OR = 4.3). Multivariate linear regression analysis also revealed that age and breastfeeding duration were the most significant determinants of ICD and IMD. An increased prevalence of NNS in the first group suggests that NNS is a dominant variable in the association between breastfeeding duration and reduced intra-arch transverse diameters which leads to increased prevalence of posterior crossbites as seen in our study. Mandibular inter-canine width is however unaffected due to a lowered tongue posture seen in these children.
Is there a prospect for hybrid aortic arch surgery?
Bashir, Mohamad; Harky, Amer; Bilal, Haris
2018-05-16
The surge of endovascular repair of aortic aneurysm in current modern aortic surgery practice has been the key for surgical management of elective cases of thoracic aortic aneurysms. This has paved way for the combined hybrid approach to be amongst the armamentarium for the management of aortic arch disease. The pivotal understanding of the aortic arch natural history coupled with device technology advancement allowed surgeons insight into delivery of hybrid surgery with acceptable morbidity and mortality results. This review article provides current insights into hybrid technique of aortic arch aneurysm repair and the evidences behind its applicability to arch surgery. It is aimed to highlight the challenges encountered for this innovative approach and correlate its challenges to those that are met by the conventional open aortic arch repair.
Tracheal Compression Caused by a Mediastinal Hematoma After Interrupted Aortic Arch Surgery.
Hua, Qingwang; Lin, Zhiyong; Hu, Xingti; Zhao, Qifeng
2017-08-03
Congenital abnormalities of the aortic arch include interrupted aortic arch (IAA), coarctation of the aorta (CoA), and double aortic arch (DAA). Aortic arch repair is difficult and postoperative complications are common. However, postoperative tracheobronchial stenosis with respiratory insufficiency is an uncommon complication and is usually caused by increased aortic anastomotic tension. We report here a case of tracheal compression by a mediastinal hematoma following IAA surgery. The patient underwent a repeat operation to remove the hematoma and was successfully weaned off the ventilator.In cases of tracheobronchial stenosis after aortic arch surgery, airway compression by increased aortic anastomotic tension is usually the first diagnosis considered by clinicians. Other causes, such as mediastinal hematomas, are often ignored. However, the severity of symptoms with mediastinal hematomas makes this an important entity.
Absent right common carotid artery associated with aberrant right subclavian artery.
Uchino, Akira; Uwabe, Kazuhiko; Osawa, Iichiro
2018-06-01
Rarely, the external and internal carotid arteries arise separately from the brachiocephalic trunk and right subclavian artery (SA) or the aortic arch and reflect the absence of a common carotid artery (CCA). We report a 45-year-old man with absent right CCA associated with aberrant right SA, an extremely rare combination, diagnosed by computed tomography (CT) angiography during follow-up for postoperative aortic dissection. Retrospective careful observation of preoperative postcontrast CT revealed the absent right CCA. Previously reported arch variations associated with absent CCA include cervical aortic arch, double aortic arch, and right aortic arch.
Ball motion and sliding friction in an arched outer race ball bearing
NASA Technical Reports Server (NTRS)
Hamrock, B. J.
1973-01-01
The motion of the ball and sliding friction in an arched outer race ball bearing under thrust loads is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.
Ball motion and sliding friction in an arched outer race ball bearing
NASA Technical Reports Server (NTRS)
Hamrock, B. J.
1974-01-01
The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.
Reassessing the Dlx code: the genetic regulation of branchial arch skeletal pattern and development
Depew, Michael J; Simpson, Carol A; Morasso, Maria; Rubenstein, John LR
2005-01-01
The branchial arches are meristic vertebrate structures, being metameric both between each other within the rostrocaudal series along the ventrocephalic surface of the embryonic head and within each individual arch: thus, just as each branchial arch must acquire a unique identity along the rostrocaudal axis, each structure within the proximodistal axis of an arch must also acquire a unique identity. It is believed that regional specification of metameric structures is controlled by the nested expression of related genes resulting in a regional code, a principal that is though to be demonstrated by the regulation of rostrocaudal axis development in animals exerted by the nested HOM-C/Hox homeobox genes. The nested expression pattern of the Dlx genes within the murine branchial arch ectomesenchyme has more recently led to the proposal of a Dlx code for the regional specification along the proximodistal axis of the branchial arches (i.e. it establishes intra-arch identity). This review re-examines this hypothesis, and presents new work on an allelic series of Dlx loss-of-function mouse mutants that includes various combinations of Dlx1, Dlx2, Dlx3, Dlx5 and Dlx6. Although we confirm fundamental aspects of the hypothesis, we further report a number of novel findings. First, contrary to initial reports, Dlx1, Dlx2 and Dlx1/2 heterozygotes exhibit alterations of branchial arch structures and Dlx2−/− and Dlx1/2−/− mutants have slight alterations of structures derived from the distal portions of their branchial arches. Second, we present evidence for a role for murine Dlx3 in the development of the branchial arches. Third, analysis of compound Dlx mutants reveals four grades of mandibular arch transformations and that the genetic interactions of cis first-order (e.g. Dlx5 and Dlx6), trans second-order (e.g. Dlx5 and Dlx2) and trans third-order paralogues (e.g. Dlx5 and Dlx1) result in significant and distinct morphological differences in mandibular arch development. We conclude by integrating functions of the Dlx genes within the context of a hypothesized general mechanism for the establishment of pattern and polarity in the first branchial arch of gnathostomes that includes regionally secreted growth factors such as Fgf8 and Bmp and other transcription factors such as Msx1, and is consistent both with the structure of the conserved gnathostome jaw bauplan and the elaboration of this bauplan to meet organismal end-point designs. PMID:16313391
... Dislocation Joint pain Joint swelling or inflammation Ligament tears Common orthopedic-related diagnoses based on body part ... injury Carpal tunnel syndrome Ganglion cyst Tendinitis Tendon tears ... Arthritis Bursitis Dislocation Frozen shoulder ( adhesive ...
10. Typical Masonry Longitudinal Section Arch Seven; Typical Masonry ...
10. Typical Masonry Longitudinal Section - Arch Seven; Typical Masonry Longitudinal Section - Arch Eight - Arlington Memorial Bridge, Spanning Potomac River between Lincoln Memorial & Arlington National Cemetery, Washington, District of Columbia, DC
Assessment of the influence of jogging on the shape of female foot arches.
Maslon, Agata; Golec, Joanna; Szczygiel, Elzbieta; Czechowska, Dorota; Golec, Boguslaw
2017-12-23
Both walking and its faster, running, consist of cyclical subsequent phases of swing and support; however, they differ in their time proportions as well as magnitude of acting forces. There is a lack of studies concerning the long-term consequences of repeated jogging cycles on the function of feet and, above all, on their permanent impact on the shape of foot arches. The objective of this study was to answer the question whether regular jogging changes the shape of the transverse and medial longitudinal arches of the feet. The research material consisted of 96 women with an average age of 26.57, and included 50 actively jogging women, and 46 of non-joggers. The study was performed with the use of EMED-SF force platform. The plantar surface of the foot was divided into 10 regions according to Cavanagh, for which peak pressure and contact time were established. Two indicators were defined: metatarsal bone pressure distribution pattern acc. to Kantali, and longitudinal arch index acc. to Cavanagh. The data obtained revealed more frequent occurrence of the greatest pressure under the centrally located metatarsal heads (lack of functional foot transverse arch) among the female joggers, compared with the non-joggers. Moreover, the findings indicate the higher frequency of medial longitudinal foot arch flattening among female runners, with a great deal of consistency between both feet, whereas results for the control group show asymmetrical medial arch shapes with right foot propensity to normal arch shape and left foot tendency for excessive arch. The observed differences in feet arch shapes between female joggers and non-joggers indicate the influence of jogging on feet functional adaptations.
Interaction of arch type and footwear on running mechanics.
Butler, Robert J; Davis, Irene S; Hamill, Joseph
2006-12-01
Running shoes are designed to accommodate various arch types to reduce the risk of lower extremity injuries sustained during running. Yet little is known about the biomechanical changes of running in the recommended footwear that may allow for a reduction in injuries. To evaluate the effects of motion control and cushion trainer shoes on running mechanics in low- and high-arched runners. Controlled laboratory study. Twenty high-arched and 20 low-arched recreational runners (>10 miles per week) were recruited for the study. Three-dimensional kinematic and kinetics were collected as subjects ran at 3.5 ms(-1) +/- 5% along a 25-m runway. The motion control shoe evaluated was the New Balance 1122, and the cushioning shoe evaluated was the New Balance 1022. Repeated-measures analyses of variance were used to determine if low- and high-arched runners responded differently to motion control and cushion trainer shoes. A significant interaction was observed in the instantaneous loading rate such that the low-arched runners had a lower instantaneous loading rate in the motion control condition, and the high-arched runners had a lower instantaneous loading rate in the cushion trainer condition. Significant main effects for shoe were observed for peak positive tibial acceleration, peak-to-peak tibial acceleration, mean loading rate, peak eversion, and eversion excursion. These results suggest that motion control shoes control rearfoot motion better than do cushion trainer shoes. In addition, cushion trainer shoes attenuate shock better than motion control shoes do. However, with the exception of instantaneous loading rate, these benefits do not differ between arch type. Running footwear recommendations should be based on an individual's running mechanics. If a mechanical analysis is not available, footwear recommendations can be based empirically on the individual's arch type.
Ohyama, Yoshiaki; Ambale-Venkatesh, Bharath; Noda, Chikara; Kim, Jang-Young; Tanami, Yutaka; Teixido-Tura, Gisela; Chugh, Atul R; Redheuil, Alban; Liu, Chia-Ying; Wu, Colin O; Hundley, W Gregory; Bluemke, David A; Guallar, Eliseo; Lima, Joao A C
2017-09-01
The predictive value of aortic arch pulse wave velocity (PWV) assessed by magnetic resonance imaging for cardiovascular disease (CVD) events has not been fully established. The aim of the present study was to evaluate the association of arch PWV with incident CVD events in MESA (Multi-Ethnic Study of Atherosclerosis). Aortic arch PWV was measured using magnetic resonance imaging at baseline in 3527 MESA participants (mean age, 62±10 years at baseline; 47% men) free of overt CVD. Cox regression was used to evaluate the risk of incident CVD (coronary heart disease, stroke, transient ischemic attack, or heart failure) in relation to arch PWV adjusted for age, sex, race, and CVD risk factors. The median value of arch PWV was 7.4 m/s (interquartile range, 5.6-10.2). There was significant interaction between arch PWV and age for outcomes, so analysis was stratified by age categories (45-54 and >54 years). There were 456 CVD events during the 10-year follow-up. Forty-five to 54-year-old participants had significant association of arch PWV with incident CVD independent of CVD risk factors (hazard ratio, 1.44; 95% confidence interval, 1.07-1.95; P =0.018; per 1-SD increase for logarithmically transformed PWV), whereas >54-year group did not ( P =0.93). Aortic arch PWV assessed by magnetic resonance imaging is a significant predictor of CVD events among middle-aged (45-54 years old) individuals, whereas arch PWV is not associated with CVD among an elderly in a large multiethnic population. © 2017 American Heart Association, Inc.
Toya, Naoki; Ohki, Takao; Fukushima, Soichiro; Shukuzawa, Kota; Ito, Eisaku; Akiba, Tadashi
2018-06-01
We describe the case of a 74-year-old man with a thoracic aortic aneurysm with a bovine arch who underwent fenestrated endovascular repair of aortic arch aneurysm using the Najuta stent graft (Kawasumi Laboratories, Inc, Tokyo, Japan). He has had a previous endovascular aneurysm repair and femoropopliteal bypass for abdominal aortic aneurysm combined with peripheral arterial disease. The Najuta stent graft was inserted and deployed at zone 0 with delicate positional adjustment of the fenestration of the stent graft to the brachiocephalic trunk. There was no endoleak or complication. His postoperative course was uneventful. At 7-month follow-up, complete exclusion of the aneurysm was noted. The Najuta stent graft repair of aortic arch aneurysms is a safe and effective treatment option for patients with a bovine arch.
Lio, Antonio; Nicolò, Francesca; Bovio, Emanuele; Serrao, Andrea; Zeitani, Jacob; Scafuri, Antonio; Chiariello, Luigi; Ruvolo, Giovanni
2016-12-01
We retrospectively evaluated early and intermediate outcomes of aortic arch surgery in patients with type A acute aortic dissection (AAD), investigating the effect of arch surgery extension on postoperative results. From January 2006 through July 2013, 201 patients with type A AAD underwent urgent corrective surgery at our institution. Of the 92 patients chosen for this study, 59 underwent hemiarch replacement (hemiarch group), and 33 underwent total arch replacement (total arch group) in conjunction with ascending aorta replacement. The operative mortality rate was 22%. Total arch replacement was associated with a 33% risk of operative death, versus 15% for hemiarch ( P =0.044). Multivariable analysis found these independent predictors of operative death: age (odds ratio [OR]=1.13/yr; 95% confidence interval [CI], 1.04-1.23; P =0.002), body mass index >30 kg/m 2 (OR=9.9; 95% CI, 1.28-19; P =0.028), postoperative low cardiac output (OR=10.6; 95% CI, 1.18-25; P =0.035), and total arch replacement (OR=8.8; 95% CI, 1.39-15; P =0.021) The mean overall 5-year survival rate was 59.3% ± 5.5%, and mean 5-year freedom from distal reintervention was 95.4% ± 3.2% ( P =NS). In type A AAD, aortic arch surgery is still associated with high operative mortality rates; hemiarch replacement can be performed more safely than total arch replacement. Rates of distal aortic reoperation were not different between the 2 surgical strategies.
Automated bone age assessment of older children using the radius
NASA Astrophysics Data System (ADS)
Tsao, Sinchai; Gertych, Arkadiusz; Zhang, Aifeng; Liu, Brent J.; Huang, Han K.
2008-03-01
The Digital Hand Atlas in Assessment of Skeletal Development is a large-scale Computer Aided Diagnosis (CAD) project for automating the process of grading Skeletal Development of children from 0-18 years of age. It includes a complete collection of 1,400 normal hand X-rays of children between the ages of 0-18 years of age. Bone Age Assessment is used as an index of skeletal development for detection of growth pathologies that can be related to endocrine, malnutrition and other disease types. Previous work at the Image Processing and Informatics Lab (IPILab) allowed the bone age CAD algorithm to accurately assess bone age of children from 1 to 16 (male) or 14 (female) years of age using the Phalanges as well as the Carpal Bones. At the older ages (16(male) or 14(female) -19 years of age) the Phalanges as well as the Carpal Bones are fully developed and do not provide well-defined features for accurate bone age assessment. Therefore integration of the Radius Bone as a region of interest (ROI) is greatly needed and will significantly improve the ability to accurately assess the bone age of older children. Preliminary studies show that an integrated Bone Age CAD that utilizes the Phalanges, Carpal Bones and Radius forms a robust method for automatic bone age assessment throughout the entire age range (1-19 years of age).
[Clinical and electrophysiological findings in carpal tunnel syndrome].
Kohara, Nobuo
2007-11-01
Carpal tunnel syndrome (CTS) is the most common nerve entrapment disorder. The clinical features of CTS are variable, but usually include pain and paresthesia in the thumb, first two fingers, and the radial-half of the ring finger. Paresthesia and sensory deficits might involve the entire palm area in some cases. Pain frequently radiate proximally into the forearm, and occasionally to the shoulder. Many patients experience pain at night and are awakened by abnormal sensations. Shaking hand relief the symptom. The two classic tests for nerve compression at the wrist are the Tinel test and the Phalen maneuver, which diagnostic value is limited. Golden standard for the diagnosis is the combination of the clinical findings and the electrophysiological study. Routine median nerve conduction study is valuable. Prolonged terminal latency of motor or sensory nerve would be found in most CTS hands. If the routine study showed equivocal, more sensitive methods are needed. Those include segmental sensory conduction study across the carpal tunnel by median stimulation at midpalm, a comparison of median and ulnar sensory nerve latencies at ring finger and a comparison of median and radial sensory nerve latencies at thumb. A difference between the median motor latency to the second lumbrical and the ulnar motor latency to the interossei muscles has also diagnostic value in some cases. In addition, inching method can localized the compression site. Using these techniques, the diagnosis of CTS would become more reliable.
Otaki, Yusuke; Kido, Nobuhide; Omiya, Tomoko; Ono, Kaori; Ueda, Miya; Azumano, Akinori; Tanaka, Sohei
2015-01-01
Various training methods have been developed for animal husbandry and health care in zoos and one of these trainings is blood collection. One training method, recently widely used for blood collection in Ursidae, requires setting up a sleeve outside the cage and gives access to limited blood collection sites. A new voluntary blood collection method without a sleeve was applied to the Andean bear (Tremarctos ornatus) and Asiatic black bear (Ursus thibetanus) with access to various veins at the same time. The present study evaluated the effectiveness of this new method and suggests improvements. Two Andean and two Asiatic black bears in Yokohama and Nogeyama Zoological Gardens, respectively, were trained to hold a bamboo pipe outside their cages. We could, thereby, simultaneously access superficial dorsal veins, the dorsal venous network of the hand, the cephalic vein from the carpal joint, and an area approximately 10 cm proximal to the carpal joint. This allowed us to evaluate which vein was most suitable for blood collection. We found that the cephalic vein, approximately 10 cm proximal to the carpal joint, was the most suitable for blood collection. This new method requires little or no modification of zoo facilities and provides a useful alternative method for blood collection. It could be adapted for use in other clinical examinations such as ultrasound examination. © 2015 Wiley Periodicals, Inc.
[Socio professional impact of surgical release of carpal tunnel syndrome].
Kraiem, Aouatef Mahfoudh; Hnia, Hajer; Bouzgarrou, Lamia; Henchi, Mohamed Adnène; Khalfallah, Taoufik
2016-01-01
The objective was studying the socio-professional impact of release surgery for carpal tunnel syndrom (CTS). We conducted a cross-sectional study of patients operated for work-related CTS; data were collected in the Occupational Health Department at the University Hospital Tahar Sfar in Mahdia, Tunisia over a period of 8 years, from 1 January 2006 to December 2013. Data collection was performed using a survey form focusing on participants' socio-professional and medical characteristics and on their professional future. We used Karasek's questionnaire to study psychosocial constraints at work. The duration of a work stoppage following release surgery for CTS was significantly related to the existence of musculoskeletal disorders other than CTS, to a statement that the carpal tunnel syndrome was work related and to job seniority. As regards the professional future of operated employees, 50.7% remained in the same position, 15.3% were given customized workstation and 33.8% were offered a different position within the same company. The professional future of these employees was related to their occupational qualifications and to the type of sensory and/or motor impairment of median nerve detected during EMG test. A number of nonlesional factors determines the duration of the work stoppage, while the professional future of patients operated for CTS essentially depends on their professional qualifications and on EMG data. Certainly much broader studies would allow to refine these results.
... single type of STI. Can women who have sex with women get syphilis? Yes. It is possible ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
... single type of STI. Can women who have sex with women get chlamydia? Yes. It is possible ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
... single type of STI. Can women who have sex with women get gonorrhea? Yes. It is possible ... Awareness Day National Women's Health Week Supporting Nursing Moms at Work Popular Topics Autoimmune diseases Breastfeeding Carpal ...
... work might include Adjusting the position of your computer keyboard to prevent carpal tunnel syndrome Being sure ... whether it is sitting in front of a computer, standing at a checkout, or walking around a ...
Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)
2005-04-01
PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is