Efficacy of Carotid Artery Stenting by the Universal Protection Method.

PubMed

Goto, Shunsaku; Ohshima, Tomotaka; Kato, Kyozo; Izumi, Takashi; Wakabayashi, Toshihiko

2018-04-18

To avoid distal plaques embolization during carotid artery stenting, we developed Universal Protection Method that combined the use of a proximal common carotid artery balloon, an external carotid artery balloon, and a distal internal carotid artery filter, with continuous flow reversal to the femoral vein. Herein, we assessed the efficacy of the Universal Protection Method by comparing stenting outcomes before and after its introduction. We assessed outcomes for 115 cases before and 41 cases after the Universal Protection Method was adopted (non-Universal Protection Method and Universal Protection Method groups, respectively). We then compared procedure details, magnetic resonance imaging (within 48 hours after the procedure), intraprocedural complications, and postoperative stroke rates. Ischemic stroke was not observed in the Universal Protection Method group, but 1 major stroke and 2 minor strokes were observed in the non-Universal Protection Method group. High-intensity areas were seen in 6 (15.0%) and 49 (42.6%) cases in the Universal Protection Method and non-Universal Protection Method groups, respectively (P = .001). Contrastingly, intraprocedural complications were observed in 9 (22.5%) and 21 (18.3%) cases in the Universal Protection Method and non-Universal Protection Method groups, respectively. Among these intraprocedural complication cases, high-intensity areas were observed in 1 case (11.1%) in the Universal Protection Method group and in 15 cases (71.4%) in the non-Universal Protection Method group. Universal Protection Method is a safe technique that is applicable to all patients undergoing carotid artery stenting, irrespective of individual risk factors. Notably, the incidence rates of both distal embolization and unexpected intraprocedural complications are low. Copyright © 2018 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Personalizing and Contextualizing Multimedia Case Methods in University-based Teacher Education: An Important Modification for Promoting Technological Design in School Science

NASA Astrophysics Data System (ADS)

Bencze, Larry; Hewitt, Jim; Pedretti, Erminia

2009-01-01

Results of various studies suggest that multimedia ‘case methods’ (activities associated with case documentaries) have many benefits in university-based teacher education contexts. They can, for example, help to ‘bridge the gap’ between perspectives and practices held by academic teacher educators and those held by student-teachers - who may adhere to perspectives and practices commonly supported in schools. On the other hand, some studies, along with theoretical arguments, suggest that there are limits to the effectiveness of multimedia case methods - because, for example, they can never fully represent realities of teaching and learning in schools. Furthermore, often missing from multimedia case methods is the student-teacher in the role of teacher. To address these concerns, we modified an existing multimedia case method by associating it with a special practice teaching situation in a school context. Qualitative data analyzed using constant comparative methods suggest that student-teachers engaged in this modified multimedia case method developed relatively deep commitments to encouraging students to conduct technology design projects - a non-traditional practice in school science. Factors that appeared to influence development of this motivation included student-teachers’ pre-instructional perspectives about science and the personalization and contextualization inherent to the modified multimedia case method.

Application of cetylpyridinium chloride and sodium chloride decontamination method for recovery of Mycobacterium tuberculosis from clinically suspected cases of pulmonary tuberculosis.

PubMed

Shinu, Pottathil; Singh, Varsha; Nair, Anroop; Mehrishi, Priya; Mehta, Sonia; Joshi, Ekta

2013-10-01

The study was designed to compare the efficacy of cetylpyridinium chloride (CPC) and sodium chloride (NaCl) decontamination method with N-acetyl L-Cystine (NALC) and sodium hydroxide (NaOH) decontamination (the reference method) method for the recovery of Mycobacterium tuberculosis (MTB) from clinically suspected cases of pulmonary tuberculosis. To evaluate CPC-NaCl and NALC-NaOH decontamination methods, sputum specimens (n = 796) were studied (culturing on Löwenstein-Jensen medium), and the performances were compared. The CPC-NaCl decontamination method demonstrated a sensitivity, specificity, negative predictive value, and positive predictive value of 97.99%, 87.53%, 70.19%, and 99.32%, respectively, when compared to NALC-NaOH decontamination method. In summary, CPC-NaCl decontamination method effectively detected significantly higher number of MTB cases (n = 208) than NALC-NaOH decontamination method (n = 149) particularly in sputum with scanty bacilli and smear-negative cases, indicating the potential of CPC-NaCl decontamination method to preserve paucibacillary cases more efficient than NALC-NaOH decontamination method. © 2013.

Case Method Teaching as Science and Art: A Metaphoric Approach and Curricular Application

ERIC Educational Resources Information Center

Greenhalgh, Anne M.

2007-01-01

The following article takes a metaphoric approach to case method teaching to shed light on one of our most important practices. The article hinges on the dual comparison of case method as science and as art. The dominant, scientific view of cases is that they are neutral descriptions of real-life business problems, subject to rigorous analysis.…

Expected number of asbestos-related lung cancers in the Netherlands in the next two decades: a comparison of methods.

PubMed

Van der Bij, Sjoukje; Vermeulen, Roel C H; Portengen, Lützen; Moons, Karel G M; Koffijberg, Hendrik

2016-05-01

Exposure to asbestos fibres increases the risk of mesothelioma and lung cancer. Although the vast majority of mesothelioma cases are caused by asbestos exposure, the number of asbestos-related lung cancers is less clear. This number cannot be determined directly as lung cancer causes are not clinically distinguishable but may be estimated using varying modelling methods. We applied three different modelling methods to the Dutch population supplemented with uncertainty ranges (UR) due to uncertainty in model input values. The first method estimated asbestos-related lung cancer cases directly from observed and predicted mesothelioma cases in an age-period-cohort analysis. The second method used evidence on the fraction of lung cancer cases attributable (population attributable risk (PAR)) to asbestos exposure. The third method incorporated risk estimates and population exposure estimates to perform a life table analysis. The three methods varied substantially in incorporated evidence. Moreover, the estimated number of asbestos-related lung cancer cases in the Netherlands between 2011 and 2030 depended crucially on the actual method applied, as the mesothelioma method predicts 17 500 expected cases (UR 7000-57 000), the PAR method predicts 12 150 cases (UR 6700-19 000), and the life table analysis predicts 6800 cases (UR 6800-33 850). The three different methods described resulted in absolute estimates varying by a factor of ∼2.5. These results show that accurate estimation of the impact of asbestos exposure on the lung cancer burden remains a challenge. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Sales Education beyond the Classroom: Building Participative Learning Experiences in Sales Management through the CMGS Method (Case Method with Guest Speakers)

ERIC Educational Resources Information Center

Ruizalba Robledo, José Luis; Almenta López, Estefanía; Vallespín Arán, María

2014-01-01

The overarching goal of working through the CMGS Method (Case Method with Guest Speakers) in Sales Management courses is to provide Business and marketing learners with practical knowledge about how a sales manager can deal with a wide variety of possible professional scenarios. Even when the case method itself is an excellent way to equip…

Lung lobe segmentation based on statistical atlas and graph cuts

NASA Astrophysics Data System (ADS)

Nimura, Yukitaka; Kitasaka, Takayuki; Honma, Hirotoshi; Takabatake, Hirotsugu; Mori, Masaki; Natori, Hiroshi; Mori, Kensaku

2012-03-01

This paper presents a novel method that can extract lung lobes by utilizing probability atlas and multilabel graph cuts. Information about pulmonary structures plays very important role for decision of the treatment strategy and surgical planning. The human lungs are divided into five anatomical regions, the lung lobes. Precise segmentation and recognition of lung lobes are indispensable tasks in computer aided diagnosis systems and computer aided surgery systems. A lot of methods for lung lobe segmentation are proposed. However, these methods only target the normal cases. Therefore, these methods cannot extract the lung lobes in abnormal cases, such as COPD cases. To extract lung lobes in abnormal cases, this paper propose a lung lobe segmentation method based on probability atlas of lobe location and multilabel graph cuts. The process consists of three components; normalization based on the patient's physique, probability atlas generation, and segmentation based on graph cuts. We apply this method to six cases of chest CT images including COPD cases. Jaccard index was 79.1%.

A Homogenization Approach for Design and Simulation of Blast Resistant Composites

NASA Astrophysics Data System (ADS)

Sheyka, Michael

Structural composites have been used in aerospace and structural engineering due to their high strength to weight ratio. Composite laminates have been successfully and extensively used in blast mitigation. This dissertation examines the use of the homogenization approach to design and simulate blast resistant composites. Three case studies are performed to examine the usefulness of different methods that may be used in designing and optimizing composite plates for blast resistance. The first case study utilizes a single degree of freedom system to simulate the blast and a reliability based approach. The first case study examines homogeneous plates and the optimal stacking sequence and plate thicknesses are determined. The second and third case studies use the homogenization method to calculate the properties of composite unit cell made of two different materials. The methods are integrated with dynamic simulation environments and advanced optimization algorithms. The second case study is 2-D and uses an implicit blast simulation, while the third case study is 3-D and simulates blast using the explicit blast method. Both case studies 2 and 3 rely on multi-objective genetic algorithms for the optimization process. Pareto optimal solutions are determined in case studies 2 and 3. Case study 3 is an integrative method for determining optimal stacking sequence, microstructure and plate thicknesses. The validity of the different methods such as homogenization, reliability, explicit blast modeling and multi-objective genetic algorithms are discussed. Possible extension of the methods to include strain rate effects and parallel computation is also examined.

Methods to recognize work-related cancer in workplaces, the general population, and by experts in the clinic, a Norwegian experience

PubMed Central

2011-01-01

Background In most countries, the numbers of work-related cancer identified are much lower than are the estimated total burden of cancer caused by exposure at work. Therefore, there is a great need to use all available practical as well as epidemiological methods for identification as well as to develop new methods of recognizing cases of work-related cancers. Methods Primarily based on practical experiences from Norway, methods to identify cases of possible work-related cancers in the general population and at workplaces as well as methods to recognize more specific cases after referral to specialized clinics are reviewed in this publication. Results Countries applying a number of the available methods to detect work-related cancer reach a reporting rate of 60 such cases per million, while other countries that do not employ such methods hardly identify any cases. As most subjects previously exposed to cancer causing agents and substances at work are gradually recruited out of work, methods should be versatile for identification of cases in the general population, as well as at work. Conclusions Even in countries using a number of the available methods for identification, only a limited fraction of the real number of work-related cancer are notified to the labour inspectorate. Clinicians should be familiar with the methods and do the best to identify work-related cancer to serve prevention. PMID:21899752

A new method for the automatic retrieval of medical cases based on the RadLex ontology.

PubMed

Spanier, A B; Cohen, D; Joskowicz, L

2017-03-01

The goal of medical case-based image retrieval (M-CBIR) is to assist radiologists in the clinical decision-making process by finding medical cases in large archives that most resemble a given case. Cases are described by radiology reports comprised of radiological images and textual information on the anatomy and pathology findings. The textual information, when available in standardized terminology, e.g., the RadLex ontology, and used in conjunction with the radiological images, provides a substantial advantage for M-CBIR systems. We present a new method for incorporating textual radiological findings from medical case reports in M-CBIR. The input is a database of medical cases, a query case, and the number of desired relevant cases. The output is an ordered list of the most relevant cases in the database. The method is based on a new case formulation, the Augmented RadLex Graph and an Anatomy-Pathology List. It uses a new case relatedness metric [Formula: see text] that prioritizes more specific medical terms in the RadLex tree over less specific ones and that incorporates the length of the query case. An experimental study on 8 CT queries from the 2015 VISCERAL 3D Case Retrieval Challenge database consisting of 1497 volumetric CT scans shows that our method has accuracy rates of 82 and 70% on the first 10 and 30 most relevant cases, respectively, thereby outperforming six other methods. The increasing amount of medical imaging data acquired in clinical practice constitutes a vast database of untapped diagnostically relevant information. This paper presents a new hybrid approach to retrieving the most relevant medical cases based on textual and image information.

Comparison of Optimization and Two-point Methods in Estimation of Soil Water Retention Curve

NASA Astrophysics Data System (ADS)

Ghanbarian-Alavijeh, B.; Liaghat, A. M.; Huang, G.

2009-04-01

Soil water retention curve (SWRC) is one of the soil hydraulic properties in which its direct measurement is time consuming and expensive. Since, its measurement is unavoidable in study of environmental sciences i.e. investigation of unsaturated hydraulic conductivity and solute transport, in this study the attempt is to predict soil water retention curve from two measured points. By using Cresswell and Paydar (1996) method (two-point method) and an optimization method developed in this study on the basis of two points of SWRC, parameters of Tyler and Wheatcraft (1990) model (fractal dimension and air entry value) were estimated and then water content at different matric potentials were estimated and compared with their measured values (n=180). For each method, we used both 3 and 1500 kPa (case 1) and 33 and 1500 kPa (case 2) as two points of SWRC. The calculated RMSE values showed that in the Creswell and Paydar (1996) method, there exists no significant difference between case 1 and case 2. However, the calculated RMSE value in case 2 (2.35) was slightly less than case 1 (2.37). The results also showed that the developed optimization method in this study had significantly less RMSE values for cases 1 (1.63) and 2 (1.33) rather than Cresswell and Paydar (1996) method.

Effect of Surveillance Method on Reported Characteristics of Lyme Disease, Connecticut, 1996–2007

PubMed Central

Nelson, Randall S.; Cartter, Matthew L.

2012-01-01

To determine the effect of changing public health surveillance methods on the reported epidemiology of Lyme disease, we analyzed Connecticut data for 1996–2007. Data were stratified by 4 surveillance methods and compared. A total of 87,174 reports were received that included 79,896 potential cases. Variations based on surveillance methods were seen. Cases reported through physician-based surveillance were significantly more likely to be classified as confirmed; such case-patients were significantly more likely to have symptoms of erythema migrans only and to have illness onset during summer months. Case-patients reported through laboratory-based surveillance were significantly more likely to have late manifestations only and to be older. Use of multiple surveillance methods provided a more complete clinical and demographic description of cases but lacked efficiency. When interpreting data, changes in surveillance method must be considered. PMID:22304873

[Role of BoBs technology in early missed abortion chorionic villi].

PubMed

Li, Z Y; Liu, X Y; Peng, P; Chen, N; Ou, J; Hao, N; Zhou, J; Bian, X M

2018-05-25

Objective: To investigate the value of bacterial artificial chromosome-on-beads (BoBs) technology in the genetic analysis of early missed abortion chorionic villi. Methods: Early missed abortion chorionic villi were detected with both conventional karyotyping method and BoBs technology in Peking Union Medical Hospital from July 2014 to March 2015. Compared the results of BoBs with conventional karyotyping analysis to evaluate the sensitivity, specificity and accuracy of this new method. Results: (1) A total of 161 samples were tested successfully in the technology of BoBs, 131 samples were tested successfully in the method of conventional karyotyping. (2) All of the cases obtained from BoBs results in (2.7±0.6) days and obtained from conventional karyotyping results in (22.5±1.9) days. There was significant statistical difference between the two groups ( t= 123.315, P< 0.01) . (3) Out of 161 cases tested in BoBs, 85 (52.8%, 85/161) cases had the abnormal chromosomes, including 79 cases chromosome number abnormality, 4 cases were chromosome segment deletion, 2 cases mosaic. Out of 131 cases tested successfully in conventional karyotyping, 79 (60.3%, 79/131) cases had the abnormal chromosomes including 62 cases chromosome number abnormality, 17 cases other chromosome number abnormality, and the rate of chromosome abnormality between two methods was no significant differences ( P =0.198) . (4) Conventional karyotyping results were served as the gold standard, the accuracy of BoBs for abnormal chromosomes was 82.4% (108/131) , analysed the normal chromosomes (52 cases) and chromosome number abnormality (62 cases) tested in conventional karyotyping, the accuracy of BoBs for chromosome number abnormality was 94.7% (108/114) . Conclusion: BoBs is a rapid reliable and easily operated method to test early missed abortion chorionic villi chromosomal abnormalities.

Non-destructive ultrasonic measurements of case depth. [in steel

NASA Technical Reports Server (NTRS)

Flambard, C.; Lambert, A.

1978-01-01

Two ultrasonic methods for nondestructive measurements of the depth of a case-hardened layer in steel are described. One method involves analysis of ultrasonic waves diffused back from the bulk of the workpiece. The other method involves finding the speed of propagation of ultrasonic waves launched on the surface of the work. Procedures followed in the two methods for measuring case depth are described.

Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians

DTIC Science & Technology

2004-04-15

Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians SERDP Project # CP-1251...2004 4. TITLE AND SUBTITLE Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians 5a. CONTRACT... cnidarians ? 9 Indicators of ballast water exchange 9 Materials and Methods 11 Phase I. Specimens 11 DNA

Prevalence of Post-tonsillectomy Bleeding as Day-case Surgery with Combination Method; Cold Dissection Tonsillectomy and Bipolar Diathermy Hemostasis

PubMed Central

Faramarzi, Abolahassan; Heydari, Seyed Taghi

2010-01-01

Objective Post-tonsillectomy hemorrhage remains an important factor in determining the safety of performing tonsillectomy as a day case procedure. The aim of this study was to determine the safety of day case tonsillectomy by using combination method, cold dissection tonsillectomy and bipolar diathermy hemostasis. Methods A prospective randomized clinical study conducted on the patients who had undergone day case tonsillectomy (DCT). There were two groups (DCT and control group) each group consisting of 150 cases. Tonsillectomy was performed by using combination method; cold dissection and hemostasis was achieved by ligation of vessels with bipolar electerocautery. Findings We found 3 cases of post-tonsillectomy bleeding in DCT group and 4 cases in the control group. There was no statistically significant difference in the rate of post-operative hemorrhage between the two groups. Conclusion The findings suggest the safety of the combination of cold dissection tonsillectomy and bipolar diathermy hemostasis as day case tonsillectomy. PMID:23056702

Case Meetings for Teaching English for Specific Academic Purposes in a Tertiary Aeronautical Engineering Programme

ERIC Educational Resources Information Center

Tatzl, Dietmar

2015-01-01

This article presents an innovative adaptation of the case method to teaching English for specific academic purposes. Widespread in its traditional form in various content disciplines, the case method bears the potential for truly student-centred language instruction. The current application transforms learners from case analysts to case authors…

A Stability Enhancement Method for Centrifugal Compressors using Active Control Casing Treatment System

NASA Astrophysics Data System (ADS)

Zhao, Yuanyang; Xiao, Jun; Li, Liansheng; Yang, Qichao; Liu, Guangbin; Wang, Le

2015-08-01

The centrifugal compressors are widely used in many fields. When the centrifugal compressors operate at the edge of the surge line, the compressor will be unstable. In addition, if the centrifugal compressor runs at this situation long time, the damage will be occurred on compressor. There are some kinds of method to improve and enlarge the range of the centrifugal compressors, such as inlet guide vane, and casing treatment. For casing treatment method, some structures have been researched, such as holed recirculation, basic slot casing treatment and groove casing treatment. All these researches are the passive methods. This paper present a new stability enhancement method based Active Control Casing Treatment (ACCT). All parts of this new method are introduced in detail. The control strategy of the system is mentioned in the paper. As a research sample, a centrifugal compressor having this system is researched using CFD method. The study focuses on the effect of the active control system on the impeller flow. The vortex in impeller is changed by the active control system. And this leads to the suppression of the extension of vortex blockage in impeller and to contribute to the enhancement of the compressor operating range.

Brain Volume Estimation Enhancement by Morphological Image Processing Tools.

PubMed

Zeinali, R; Keshtkar, A; Zamani, A; Gharehaghaji, N

2017-12-01

Volume estimation of brain is important for many neurological applications. It is necessary in measuring brain growth and changes in brain in normal/abnormal patients. Thus, accurate brain volume measurement is very important. Magnetic resonance imaging (MRI) is the method of choice for volume quantification due to excellent levels of image resolution and between-tissue contrast. Stereology method is a good method for estimating volume but it requires to segment enough MRI slices and have a good resolution. In this study, it is desired to enhance stereology method for volume estimation of brain using less MRI slices with less resolution. In this study, a program for calculating volume using stereology method has been introduced. After morphologic method, dilation was applied and the stereology method enhanced. For the evaluation of this method, we used T1-wighted MR images from digital phantom in BrainWeb which had ground truth. The volume of 20 normal brain extracted from BrainWeb, was calculated. The volumes of white matter, gray matter and cerebrospinal fluid with given dimension were estimated correctly. Volume calculation from Stereology method in different cases was made. In three cases, Root Mean Square Error (RMSE) was measured. Case I with T=5, d=5, Case II with T=10, D=10 and Case III with T=20, d=20 (T=slice thickness, d=resolution as stereology parameters). By comparing these results of two methods, it is obvious that RMSE values for our proposed method are smaller than Stereology method. Using morphological operation, dilation allows to enhance the estimation volume method, Stereology. In the case with less MRI slices and less test points, this method works much better compared to Stereology method.

78 FR 13402 - Proposed Collection; Comment Request for Regulation Project

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... the election not to apply look-back method in de minimis cases. DATES: Written comments should be... . SUPPLEMENTARY INFORMATION: Title: Election Not to Apply Look-Back Method in De Minimis Cases. OMB Number: 1545...), a taxpayer may elect not to apply the look-back method to long-term contracts in de minimis cases...

Cognitive neuropsychology and its vicissitudes: The fate of Caramazza's axioms.

PubMed

Shallice, Tim

2015-01-01

Cognitive neuropsychology is characterized as the discipline in which one draws conclusions about the organization of the normal cognitive systems from the behaviour of brain-damaged individuals. In a series of papers, Caramazza, later in collaboration with McCloskey, put forward four assumptions as the bridge principles for making such inferences. Four potential pitfalls, one for each axiom, are discussed with respect to the use of single-case methods. Two of the pitfalls also apply to case series and group study procedures, and the other two are held to be indirectly testable or avoidable. Moreover, four other pitfalls are held to apply to case series or group study methods. It is held that inferences from single-case procedures may profitably be supported or rejected using case series/group study methods, but also that analogous support needs to be given in the other direction for functionally based case series or group studies. It is argued that at least six types of neuropsychological method are valuable for extrapolation to theories of the normal cognitive system but that the single- or multiple-case study remains a critical part of cognitive neuropsychology's methods.

A statistical evaluation of formation disturbance produced by well- casing installation methods

USGS Publications Warehouse

Morin, R.H.; LeBlanc, D.R.; Teasdale, W.E.

1988-01-01

Water-resources investigations concerned with contaminant transport through aquifers comprised of very loose, unconsolidated sediments have shown that small-scale variations in aquifer characteristics can significantly affect solute transport and dispersion. Commonly, measurement accuracy and resolution have been limited by a borehole environment consisting of an annulus of disturbed sediments produced by the casing-installation method. In an attempt to quantify this disturbance and recognize its impact on the characterization of unconsolidated deposits, three installation methods were examined and compared in a sand-and-gravel outwash at a test site on Cape Cod, Massachusetts. These installation methods were: 1) casing installed in a mud-rotary hole; 2) casing installed in an augered hole; and 3) flush-joint steel casing hammer-driven from land surface. Fifteen wells were logged with epithermal neutron and natural gamma tools. Concludes that augering is the most disruptive of the three casing-installation methods and that driving casing directly, though typically a more time-consuming operation, transmits the least amount of disturbance into the surrounding formation. -from Authors

The comparative performance of PMI estimation in skeletal remains by three methods (C-14, luminol test and OHI): analysis of 20 cases.

PubMed

Cappella, Annalisa; Gibelli, Daniele; Muccino, Enrico; Scarpulla, Valentina; Cerutti, Elisa; Caruso, Valentina; Sguazza, Emanuela; Mazzarelli, Debora; Cattaneo, Cristina

2015-01-27

When estimating post-mortem interval (PMI) in forensic anthropology, the only method able to give an unambiguous result is the analysis of C-14, although the procedure is expensive. Other methods, such as luminol tests and histological analysis, can be performed as preliminary investigations and may allow the operators to gain a preliminary indication concerning PMI, but they lack scientific verification, although luminol testing has been somewhat more accredited in the past few years. Such methods in fact may provide some help as they are inexpensive and can give a fast response, especially in the phase of preliminary investigations. In this study, 20 court cases of human skeletonized remains were dated by the C-14 method. For two cases, results were chronologically set after the 1950s; for one case, the analysis was not possible technically. The remaining 17 cases showed an archaeological or historical collocation. The same bone samples were also screened with histological examination and with the luminol test. Results showed that only four cases gave a positivity to luminol and a high Oxford Histology Index (OHI) score at the same time: among these, two cases were dated as recent by the radiocarbon analysis. Thus, only two false-positive results were given by the combination of these methods and no false negatives. Thus, the combination of two qualitative methods (luminol test and microscopic analysis) may represent a promising solution to cases where many fragments need to be quickly tested.

Case Selection via Matching

ERIC Educational Resources Information Center

Nielsen, Richard A.

2016-01-01

This article shows how statistical matching methods can be used to select "most similar" cases for qualitative analysis. I first offer a methodological justification for research designs based on selecting most similar cases. I then discuss the applicability of existing matching methods to the task of selecting most similar cases and…

Teaching Agricultural Policy with the Case Method.

ERIC Educational Resources Information Center

Stuhler, E. A.

1994-01-01

Two groups of agriculture students were taught with case studies and one group without (about 30 students in each group). Case-method groups had greater gains in cognitive performance and changed motivation and attitudes. Case studies had a positive effect on the development of problem-solving skills. (SK)

On the equivalence of case-crossover and time series methods in environmental epidemiology.

PubMed

Lu, Yun; Zeger, Scott L

2007-04-01

The case-crossover design was introduced in epidemiology 15 years ago as a method for studying the effects of a risk factor on a health event using only cases. The idea is to compare a case's exposure immediately prior to or during the case-defining event with that same person's exposure at otherwise similar "reference" times. An alternative approach to the analysis of daily exposure and case-only data is time series analysis. Here, log-linear regression models express the expected total number of events on each day as a function of the exposure level and potential confounding variables. In time series analyses of air pollution, smooth functions of time and weather are the main confounders. Time series and case-crossover methods are often viewed as competing methods. In this paper, we show that case-crossover using conditional logistic regression is a special case of time series analysis when there is a common exposure such as in air pollution studies. This equivalence provides computational convenience for case-crossover analyses and a better understanding of time series models. Time series log-linear regression accounts for overdispersion of the Poisson variance, while case-crossover analyses typically do not. This equivalence also permits model checking for case-crossover data using standard log-linear model diagnostics.

Analysis of messy data with heteroscedastic in mean models

NASA Astrophysics Data System (ADS)

Trianasari, Nurvita; Sumarni, Cucu

2016-02-01

In the analysis of the data, we often faced with the problem of data where the data did not meet some assumptions. In conditions of such data is often called data messy. This problem is a consequence of the data that generates outliers that bias or error estimation. To analyze the data messy, there are three approaches, namely standard analysis, transform data and data analysis methods rather than a standard. Simulations conducted to determine the performance of a third comparative test procedure on average often the model variance is not homogeneous. Data simulation of each scenario is raised as much as 500 times. Next, we do the analysis of the average comparison test using three methods, Welch test, mixed models and Welch-r test. Data generation is done through software R version 3.1.2. Based on simulation results, these three methods can be used for both normal and abnormal case (homoscedastic). The third method works very well on data balanced or unbalanced when there is no violation in the homogenity's assumptions variance. For balanced data, the three methods still showed an excellent performance despite the violation of the assumption of homogeneity of variance, with the requisite degree of heterogeneity is high. It can be shown from the level of power test above 90 percent, and the best to Welch method (98.4%) and the Welch-r method (97.8%). For unbalanced data, Welch method will be very good moderate at in case of heterogeneity positive pair with a 98.2% power. Mixed models method will be very good at case of highly heterogeneity was negative negative pairs with power. Welch-r method works very well in both cases. However, if the level of heterogeneity of variance is very high, the power of all method will decrease especially for mixed models methods. The method which still works well enough (power more than 50%) is Welch-r method (62.6%), and the method of Welch (58.6%) in the case of balanced data. If the data are unbalanced, Welch-r method works well enough in the case of highly heterogeneous positive positive or negative negative pairs, there power are 68.8% and 51% consequencly. Welch method perform well enough only in the case of highly heterogeneous variety of positive positive pairs with it is power of 64.8%. While mixed models method is good in the case of a very heterogeneous variety of negative partner with 54.6% power. So in general, when there is a variance is not homogeneous case, Welch method is applied to the data rank (Welch-r) has a better performance than the other methods.

Ontology-Based Method for Fault Diagnosis of Loaders.

PubMed

Xu, Feixiang; Liu, Xinhui; Chen, Wei; Zhou, Chen; Cao, Bingwei

2018-02-28

This paper proposes an ontology-based fault diagnosis method which overcomes the difficulty of understanding complex fault diagnosis knowledge of loaders and offers a universal approach for fault diagnosis of all loaders. This method contains the following components: (1) An ontology-based fault diagnosis model is proposed to achieve the integrating, sharing and reusing of fault diagnosis knowledge for loaders; (2) combined with ontology, CBR (case-based reasoning) is introduced to realize effective and accurate fault diagnoses following four steps (feature selection, case-retrieval, case-matching and case-updating); and (3) in order to cover the shortages of the CBR method due to the lack of concerned cases, ontology based RBR (rule-based reasoning) is put forward through building SWRL (Semantic Web Rule Language) rules. An application program is also developed to implement the above methods to assist in finding the fault causes, fault locations and maintenance measures of loaders. In addition, the program is validated through analyzing a case study.

A Comparison of Trajectory Optimization Methods for the Impulsive Minimum Fuel Rendezvous Problem

NASA Technical Reports Server (NTRS)

Hughes, Steven P.; Mailhe, Laurie M.; Guzman, Jose J.

2003-01-01

In this paper we present, a comparison of trajectory optimization approaches for the minimum fuel rendezvous problem. Both indirect and direct methods are compared for a variety of test cases. The indirect approach is based on primer vector theory. The direct approaches are implemented numerically and include Sequential Quadratic Programming (SQP). Quasi- Newton and Nelder-Meade Simplex. Several cost function parameterizations are considered for the direct approach. We choose one direct approach that appears to be the most flexible. Both the direct and indirect methods are applied to a variety of test cases which are chosen to demonstrate the performance of each method in different flight regimes. The first test case is a simple circular-to-circular coplanar rendezvous. The second test case is an elliptic-to-elliptic line of apsides rotation. The final test case is an orbit phasing maneuver sequence in a highly elliptic orbit. For each test case we present a comparison of the performance of all methods we consider in this paper.

Ontology-Based Method for Fault Diagnosis of Loaders

PubMed Central

Liu, Xinhui; Chen, Wei; Zhou, Chen; Cao, Bingwei

2018-01-01

This paper proposes an ontology-based fault diagnosis method which overcomes the difficulty of understanding complex fault diagnosis knowledge of loaders and offers a universal approach for fault diagnosis of all loaders. This method contains the following components: (1) An ontology-based fault diagnosis model is proposed to achieve the integrating, sharing and reusing of fault diagnosis knowledge for loaders; (2) combined with ontology, CBR (case-based reasoning) is introduced to realize effective and accurate fault diagnoses following four steps (feature selection, case-retrieval, case-matching and case-updating); and (3) in order to cover the shortages of the CBR method due to the lack of concerned cases, ontology based RBR (rule-based reasoning) is put forward through building SWRL (Semantic Web Rule Language) rules. An application program is also developed to implement the above methods to assist in finding the fault causes, fault locations and maintenance measures of loaders. In addition, the program is validated through analyzing a case study. PMID:29495646

The Self-Actualizing Case Method.

ERIC Educational Resources Information Center

Gunn, Bruce

1980-01-01

Presents a case procedure designed to assist trainees in perfecting their problem-solving skills. Elements of that procedure are the rationale behind this "self-actualizing" case method; the role that the instructor, case leaders, and participants play in its execution; and the closed-loop grading system used for peer evaluation. (CT)

KRAS mutation testing in colorectal cancer: comparison of the results obtained using 3 different methods for the analysis of codons G12 and G13.

PubMed

Bihl, Michel P; Hoeller, Sylvia; Andreozzi, Maria Carla; Foerster, Anja; Rufle, Alexander; Tornillo, Luigi; Terracciano, Luigi

2012-03-01

Targeting the epidermal growth factor receptor (EGFR) is a new therapeutic option for patients with metastatic colorectal or lung carcinoma. However, the therapy efficiency highly depends on the KRAS mutation status in the given tumour. Therefore a reliable and secure KRAS mutation testing is crucial. Here we investigated 100 colorectal carcinoma samples with known KRAS mutation status (62 mutated cases and 38 wild type cases) in a comparative manner with three different KRAS mutation testing techniques (Pyrosequencing, Dideoxysequencing and INFINITI) in order to test their reliability and sensitivity. For the large majority of samples (96/100, 96%), the KRAS mutation status obtained by all three methods was the same. Only two cases with clear discrepancies were observed. One case was reported as wild type by the INFINITI method while the two other methods detected a G13C mutation. In the second case the mutation could be detected by the Pyrosequencing and INFINITI method (15% and 15%), while no signal for mutation could be observed with the Dideoxysequencing method. Additional two unclear results were due to a detection of a G12V with the INFINITI method, which was below cut-off when repeated and which was not detectable by the other two methods and very weak signals in a G12V mutated case with the Dideoxy- and Pyroseqencing method compared to the INFINITI method, respectively. In summary all three methods are reliable and robust methods in detecting KRAS mutations. INFINITI, however seems to be slightly more sensitive compared to Dideoxy- and Pyrosequencing.

Design method of large-diameter rock-socketed pile with steel casing

NASA Astrophysics Data System (ADS)

Liu, Ming-wei; Fang, Fang; Liang, Yue

2018-02-01

There is a lack of the design and calculation method of large-diameter rock-socketed pile with steel casing. Combined with the “twelfth five-year plan” of the National Science & Technology Pillar Program of China about “Key technologies on the ports and wharfs constructions of the mountain canalization channels”, this paper put forward the structured design requirements of concrete, steel bar distribution and steel casing, and a checking calculation method of the bearing capacity of the normal section of the pile and the maximum crack width at the bottom of the steel casing. The design method will have some degree of guiding significance for the design of large-diameter rock-socketed pile with steel casing.

[Case-non case studies: Principles, methods, bias and interpretation].

PubMed

Faillie, Jean-Luc

2017-10-31

Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

Developing the DESCARTE Model: The Design of Case Study Research in Health Care.

PubMed

Carolan, Clare M; Forbat, Liz; Smith, Annetta

2016-04-01

Case study is a long-established research tradition which predates the recent surge in mixed-methods research. Although a myriad of nuanced definitions of case study exist, seminal case study authors agree that the use of multiple data sources typify this research approach. The expansive case study literature demonstrates a lack of clarity and guidance in designing and reporting this approach to research. Informed by two reviews of the current health care literature, we posit that methodological description in case studies principally focuses on description of case study typology, which impedes the construction of methodologically clear and rigorous case studies. We draw from the case study and mixed-methods literature to develop the DESCARTE model as an innovative approach to the design, conduct, and reporting of case studies in health care. We examine how case study fits within the overall enterprise of qualitatively driven mixed-methods research, and the potential strengths of the model are considered. © The Author(s) 2015.

Experiences Using Lightweight Formal Methods for Requirements Modeling

NASA Technical Reports Server (NTRS)

Easterbrook, Steve; Lutz, Robyn; Covington, Rick; Kelly, John; Ampo, Yoko; Hamilton, David

1997-01-01

This paper describes three case studies in the lightweight application of formal methods to requirements modeling for spacecraft fault protection systems. The case studies differ from previously reported applications of formal methods in that formal methods were applied very early in the requirements engineering process, to validate the evolving requirements. The results were fed back into the projects, to improve the informal specifications. For each case study, we describe what methods were applied, how they were applied, how much effort was involved, and what the findings were. In all three cases, formal methods enhanced the existing verification and validation processes, by testing key properties of the evolving requirements, and helping to identify weaknesses. We conclude that the benefits gained from early modeling of unstable requirements more than outweigh the effort needed to maintain multiple representations.

Homeland Security Collaboration: Catch Phrase or Preeminent Organizational Construct?

DTIC Science & Technology

2009-09-01

collaborative effort? C. RESEARCH METHODOLOGY This research project utilized a modified case study methodology. The traditional case study method ...discussing the research method , offering smart practices and culminate with findings and recommendations. Chapter II Homeland Security Collaboration...41 Centers for Regional Excellence, “Building Models.” 16 Chapter III Research Methodology:  Modified Case Study Method is

75 FR 5852 - Proposed Collection; Comment Request for Regulation Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

... Method in De Minimis Cases (Sec. 1.460-6). DATES: Written comments should be received on or before April... INFORMATION: Title: Election Not to Apply Look-Back Method in De Minimis Cases. OMB Number: 1545-1572... may elect not to apply the look-back method to long-term contracts in de minimis cases. The taxpayer...

Dilemmas of a Newly Recruited Academic Qualified Professor: A Case

ERIC Educational Resources Information Center

Agrawal, Anand

2015-01-01

This case describes the situation of a newly recruited academic professor who volunteered to teach a course on Research Methods to first-term MBA students in a practitioner-oriented case method Business School. Research Methods is a unique course due to its relevance not only in business but also across all graduate programs. Instructional and…

Automatic Annotation Method on Learners' Opinions in Case Method Discussion

ERIC Educational Resources Information Center

Samejima, Masaki; Hisakane, Daichi; Komoda, Norihisa

2015-01-01

Purpose: The purpose of this paper is to annotate an attribute of a problem, a solution or no annotation on learners' opinions automatically for supporting the learners' discussion without a facilitator. The case method aims at discussing problems and solutions in a target case. However, the learners miss discussing some of problems and solutions.…

30 CFR 75.701-2 - Approved method of grounding metallic frames, casings and other enclosures receiving power from...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approved method of grounding metallic frames... grounding metallic frames, casings and other enclosures receiving power from single-phase 110-220-volt... only method of grounding that will be approved is the connection of all metallic frames, casings and...

Using the Case Study Method in Teaching College Physics

ERIC Educational Resources Information Center

Burko, Lior M.

2016-01-01

The case study teaching method has a long history (starting at least with Socrates) and wide current use in business schools, medical schools, law schools, and a variety of other disciplines. However, relatively little use is made of it in the physical sciences, specifically in physics or astronomy. The case study method should be considered by…

A Case-Based Reasoning Method with Rank Aggregation

NASA Astrophysics Data System (ADS)

Sun, Jinhua; Du, Jiao; Hu, Jian

2018-03-01

In order to improve the accuracy of case-based reasoning (CBR), this paper addresses a new CBR framework with the basic principle of rank aggregation. First, the ranking methods are put forward in each attribute subspace of case. The ordering relation between cases on each attribute is got between cases. Then, a sorting matrix is got. Second, the similar case retrieval process from ranking matrix is transformed into a rank aggregation optimal problem, which uses the Kemeny optimal. On the basis, a rank aggregation case-based reasoning algorithm, named RA-CBR, is designed. The experiment result on UCI data sets shows that case retrieval accuracy of RA-CBR algorithm is higher than euclidean distance CBR and mahalanobis distance CBR testing.So we can get the conclusion that RA-CBR method can increase the performance and efficiency of CBR.

Teaching Business Demography Using Case Studies.

PubMed

Swanson, David A; Morrison, Peter A

2010-02-01

Many faculty members consider using case studies but not all end up using them. We provide a brief review of what cases are intended to do and identify three ways in which they can be used. We then use an example to illustrate how we have used the case study method in teaching business demography. Among other benefits, we note that the case studies method not only encourages the acquisition of skills by students, but can be used to promote "deep structure learning," an approach naturally accommodates other features associated with the case studies method-the development of critical thinking skills, the use of real world problems, the emphasis of concepts over mechanics, writing and presentation skills, active cooperative learning and the "worthwhileness" of a course. As noted by others, we understand the limitations of the case study method. However, given its strengths, we believe it has a place in the instructional toolbox for courses in business demography. The fact that courses we teach is a testament to our perceived efficacy of this tool.

Neural network method to correct bidirectional effects in water-leaving radiance.

PubMed

Fan, Yongzhen; Li, Wei; Voss, Kenneth J; Gatebe, Charles K; Stamnes, Knut

2016-01-01

Ocean color algorithms that rely on "atmospherically corrected" nadir water-leaving radiances to infer information about marine constituents such as the chlorophyll concentration depend on a reliable method to convert the angle-dependent measured radiances from the observation direction to the nadir direction. It is also important to convert the measured radiances to the nadir direction when comparing and merging products from different satellite missions. The standard correction method developed by Morel and coworkers requires knowledge of the chlorophyll concentration. Also, the standard method was developed based on the Case 1 (open ocean) assumption, which makes it unsuitable for Case 2 situations such as turbid coastal waters. We introduce a neural network method to convert the angle-dependent water-leaving radiance (or the corresponding remote sensing reflectance) from the observation direction to the nadir direction. This method relies on neither an "atmospheric correction" nor prior knowledge of the water constituents or the inherent optical properties. It directly converts the remote sensing reflectance from an arbitrary slanted viewing direction to the nadir direction by using a trained neural network. This method is fast and accurate, and it can be easily adapted to different remote sensing instruments. Validation using NuRADS measurements in different types of water shows that this method is suitable for both Case 1 and Case 2 waters. In Case 1 or chlorophyll-dominated waters, our neural network method produces corrections similar to those of the standard method. In Case 2 waters, especially sediment-dominated waters, a significant improvement was obtained compared to the standard method.

Cases in TESOL Teacher Education: Creating a Forum for Reflection.

ERIC Educational Resources Information Center

Jackson, Jane

1997-01-01

Reviews the case method from an historical perspective and explores why and how "decision" cases might be used by teacher educators in the professional preparation of teachers as reflective English-as-a-Second-Language specialists. Argues that the case method can enhance the critical thinking, analytical, and communication skills of novice and…

16 CFR 1500.232 - Statement on animal testing policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

... case-by-case basis and, upon review, determine whether to post the test method on the animal testing... on a case-by-case basis and, upon review, determine whether to post the test method on the animal...-15 minutes apart, prior to instilling the test material to the eye); post-treatment with systemic...

16 CFR § 1500.232 - Statement on animal testing policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

... case-by-case basis and, upon review, determine whether to post the test method on the animal testing... on a case-by-case basis and, upon review, determine whether to post the test method on the animal...-15 minutes apart, prior to instilling the test material to the eye); post-treatment with systemic...

Case Studies for Effective Business Instruction.

ERIC Educational Resources Information Center

McAlister-Kizzier, Donna

This book is designed as a resource for educators who teach business content in a variety of instructional settings. It contains case studies representing all functional areas of business, including corporate training, for grades 7 through graduate education. Chapter 1 provides an overview of the case study method. The history of the case method,…

Experiences Using Formal Methods for Requirements Modeling

NASA Technical Reports Server (NTRS)

Easterbrook, Steve; Lutz, Robyn; Covington, Rick; Kelly, John; Ampo, Yoko; Hamilton, David

1996-01-01

This paper describes three cases studies in the lightweight application of formal methods to requirements modeling for spacecraft fault protection systems. The case studies differ from previously reported applications of formal methods in that formal methods were applied very early in the requirements engineering process, to validate the evolving requirements. The results were fed back into the projects, to improve the informal specifications. For each case study, we describe what methods were applied, how they were applied, how much effort was involved, and what the findings were. In all three cases, the formal modeling provided a cost effective enhancement of the existing verification and validation processes. We conclude that the benefits gained from early modeling of unstable requirements more than outweigh the effort needed to maintain multiple representations.

The Integration of Women into Combat Units in the Republic of Korea Army

DTIC Science & Technology

2014-12-12

five generally accepted methods for gathering data in qualitative research : biography, phenomenology , grounded theory , ethnography , and a case study .1... methods of various research materials to address the primary research question. The case studies of the transition and development of female...Data collection for this study used the case study method , as it focused on

Adjusting case mix payment amounts for inaccurately reported comorbidity data.

PubMed

Sutherland, Jason M; Hamm, Jeremy; Hatcher, Jeff

2010-03-01

Case mix methods such as diagnosis related groups have become a basis of payment for inpatient hospitalizations in many countries. Specifying cost weight values for case mix system payment has important consequences; recent evidence suggests case mix cost weight inaccuracies influence the supply of some hospital-based services. To begin to address the question of case mix cost weight accuracy, this paper is motivated by the objective of improving the accuracy of cost weight values due to inaccurate or incomplete comorbidity data. The methods are suitable to case mix methods that incorporate disease severity or comorbidity adjustments. The methods are based on the availability of detailed clinical and cost information linked at the patient level and leverage recent results from clinical data audits. A Bayesian framework is used to synthesize clinical data audit information regarding misclassification probabilities into cost weight value calculations. The models are implemented through Markov chain Monte Carlo methods. An example used to demonstrate the methods finds that inaccurate comorbidity data affects cost weight values by biasing cost weight values (and payments) downward. The implications for hospital payments are discussed and the generalizability of the approach is explored.

The Efficacy of Thoracic Ultrasonography in Postoperative Newborn Patients after Cardiac Surgery

PubMed Central

Ozturk, Erkut; Tanidir, Ibrahim Cansaran; Yildiz, Okan; Ergul, Yakup; Guzeltas, Alper

2017-01-01

Objective In this study, the efficacy of thoracic ultrasonography during echocardiography was evaluated in newborns. Methods Sixty newborns who had undergone pediatric cardiac surgery were successively evaluated between March 1, 2015, and September 1, 2015. Patients were evaluated for effusion, pulmonary atelectasis, and pneumothorax by ultrasonography, and results were compared with X-ray findings. Results Sixty percent (n=42) of the cases were male, the median age was 14 days (2-30 days), and the median body weight was 3.3 kg (2.8-4.5 kg). The median RACHS-1 score was 4 (2-6). Atelectasis was demonstrated in 66% (n=40) of the cases. Five of them were determined solely by X-ray, 10 of them only by ultrasonography, and 25 of them by both ultrasonography and X-ray. Pneumothorax was determined in 20% (n=12) of the cases. Excluding one case determined by both methods, all of the 11 cases were diagnosed by X-ray. Pleural effusion was diagnosed in 26% (n=16) of the cases. Four of the cases were demonstrated solely by ultrasonography, three of them solely by X-ray, and nine of the cases by both methods. Pericardial effusion was demonstrated in 10% (n=6) of the cases. Except for one of the cases determined by both methods, five of the cases were diagnosed by ultrasonography. There was a moderate correlation when all pathologies evaluated together (k=0.51). Conclusion Thoracic ultrasonography might be a beneficial non-invasive method to evaluate postoperative respiratory problems in newborns who had congenital cardiac surgery. PMID:28977200

Using the Case Study Method in Teaching College Physics

NASA Astrophysics Data System (ADS)

Burko, Lior M.

2016-10-01

The case study teaching method has a long history (starting at least with Socrates) and wide current use in business schools, medical schools, law schools, and a variety of other disciplines. However, relatively little use is made of it in the physical sciences, specifically in physics or astronomy. The case study method should be considered by physics faculty as part of the effort to transition the teaching of college physics from the traditional frontal-lecture format to other formats that enhance active student participation. In this paper we endeavor to interest physics instructors in the case study method, and hope that it would also serve as a call for more instructors to produce cases that they use in their own classes and that can also be adopted by other instructors.

76 FR 20345 - Notice of Availability of Government-Owned Inventions; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... Case No. 98,801: APPARATUS AND METHOD FOR GRAZING ANGLE INDEPENDENT SIGNAL DETECTION// Navy Case No. 98,946: APPARATUS AND METHOD FOR COMPENSATING IMAGES FOR DIFFERENCES IN ASPECT//Navy Case No. 98,947...

An approach to checking case-crossover analyses based on equivalence with time-series methods.

PubMed

Lu, Yun; Symons, James Morel; Geyh, Alison S; Zeger, Scott L

2008-03-01

The case-crossover design has been increasingly applied to epidemiologic investigations of acute adverse health effects associated with ambient air pollution. The correspondence of the design to that of matched case-control studies makes it inferentially appealing for epidemiologic studies. Case-crossover analyses generally use conditional logistic regression modeling. This technique is equivalent to time-series log-linear regression models when there is a common exposure across individuals, as in air pollution studies. Previous methods for obtaining unbiased estimates for case-crossover analyses have assumed that time-varying risk factors are constant within reference windows. In this paper, we rely on the connection between case-crossover and time-series methods to illustrate model-checking procedures from log-linear model diagnostics for time-stratified case-crossover analyses. Additionally, we compare the relative performance of the time-stratified case-crossover approach to time-series methods under 3 simulated scenarios representing different temporal patterns of daily mortality associated with air pollution in Chicago, Illinois, during 1995 and 1996. Whenever a model-be it time-series or case-crossover-fails to account appropriately for fluctuations in time that confound the exposure, the effect estimate will be biased. It is therefore important to perform model-checking in time-stratified case-crossover analyses rather than assume the estimator is unbiased.

A case-association cluster detection and visualisation tool with an application to Legionnaires’ disease

PubMed Central

Sansom, P; Copley, V R; Naik, F C; Leach, S; Hall, I M

2013-01-01

Statistical methods used in spatio-temporal surveillance of disease are able to identify abnormal clusters of cases but typically do not provide a measure of the degree of association between one case and another. Such a measure would facilitate the assignment of cases to common groups and be useful in outbreak investigations of diseases that potentially share the same source. This paper presents a model-based approach, which on the basis of available location data, provides a measure of the strength of association between cases in space and time and which is used to designate and visualise the most likely groupings of cases. The method was developed as a prospective surveillance tool to signal potential outbreaks, but it may also be used to explore groupings of cases in outbreak investigations. We demonstrate the method by using a historical case series of Legionnaires’ disease amongst residents of England and Wales. PMID:23483594

Impact of abbreviated lecture with interactive mini-cases vs traditional lecture on student performance in the large classroom.

PubMed

Marshall, Leisa L; Nykamp, Diane L; Momary, Kathryn M

2014-12-15

To compare the impact of 2 different teaching and learning methods on student mastery of learning objectives in a pharmacotherapy module in the large classroom setting. Two teaching and learning methods were implemented and compared in a required pharmacotherapy module for 2 years. The first year, multiple interactive mini-cases with inclass individual assessment and an abbreviated lecture were used to teach osteoarthritis; a traditional lecture with 1 inclass case discussion was used to teach gout. In the second year, the same topics were used but the methods were flipped. Student performance on pre/post individual readiness assessment tests (iRATs), case questions, and subsequent examinations were compared each year by the teaching and learning method and then between years by topic for each method. Students also voluntarily completed a 20-item evaluation of the teaching and learning methods. Postpresentation iRATs were significantly higher than prepresentation iRATs for each topic each year with the interactive mini-cases; there was no significant difference in iRATs before and after traditional lecture. For osteoarthritis, postpresentation iRATs after interactive mini-cases in year 1 were significantly higher than postpresentation iRATs after traditional lecture in year 2; the difference in iRATs for gout per learning method was not significant. The difference between examination performance for osteoarthritis and gout was not significant when the teaching and learning methods were compared. On the student evaluations, 2 items were significant both years when answers were compared by teaching and learning method. Each year, students ranked their class participation higher with interactive cases than with traditional lecture, but both years they reported enjoying the traditional lecture format more. Multiple interactive mini-cases with an abbreviated lecture improved immediate mastery of learning objectives compared to a traditional lecture format, regardless of therapeutic topic, but did not improve student performance on subsequent examinations.

Method to Identify Deep Cases Based on Relationships between Nouns, Verbs, and Particles

ERIC Educational Resources Information Center

Ide, Daisuke; Kimura, Masaomi

2016-01-01

Deep cases representing the significant meaning of nouns in sentences play a crucial role in semantic analysis. However, a case tends to be manually identified because it requires understanding the meaning and relationships of words. To address this problem, we propose a method to predict deep cases by analyzing the relationship between nouns,…

Rethinking a Case Study Method in Educational Research: A Comparative Analysis Method in Qualitative Research

ERIC Educational Resources Information Center

Murakami, Yusuke

2013-01-01

There are two types of qualitative research that analyze a small number of cases or a single case: idiographic differentiation and nomothetic/generalization. There are few case studies of generalization. This is because theoretical inclination is weak in the field of education, and the binary framework of quantitative versus qualitative research…

A Case Study of Project ATHENA: Tactical Level Technological Innovation Aboard the USS Benfold

DTIC Science & Technology

2014-12-01

case studies , grounded theory research , phenomenological research and narrative research . 13 3. Qualitative Methods : Selection The researcher’s...12 B. THE CASE STUDY METHOD 1. Introduction The case study is a type of qualitative research that enables the researcher to chronicle and...objectives and the research environment ultimately determine the

Case Method in the Teaching of Food Safety

ERIC Educational Resources Information Center

Gallego, Alfredo; Fortunato, Maria S.; Rossi, Susana L.; Korol, Sonia E.; Moretton, Juan A.

2013-01-01

One of the fundamental aims of education is the integration of theory and practice. The case method is a teaching strategy in which students must apply their knowledge to solve real-life situations. They have to analyze the case described and propose the best possible solution. Although the case may be written, the use of new information and…

Using case method to explicitly teach formative assessment in preservice teacher science education

NASA Astrophysics Data System (ADS)

Bentz, Amy Elizabeth

The process of formative assessment improves student understanding; however, the topic of formative assessment in preservice education has been severely neglected. Since a major goal of teacher education is to create reflective teaching professionals, preservice teachers should be provided an opportunity to critically reflect on the use of formative assessment in the classroom. Case method is an instructional methodology that allows learners to engage in and reflect on real-world situations. Case based pedagogy can play an important role in enhancing preservice teachers' ability to reflect on teaching and learning by encouraging alternative ways of thinking about assessment. Although the literature on formative assessment and case methodology are extensive, using case method to explore the formative assessment process is, at best, sparse. The purpose of this study is to answer the following research questions: To what extent does the implementation of formative assessment cases in methods instruction influence preservice elementary science teachers' knowledge of formative assessment? What descriptive characteristics change between the preservice teachers' pre-case and post-case written reflection that would demonstrate learning had occurred? To investigate these questions, preservice teachers in an elementary methods course were asked to reflect on and discuss five cases. Pre/post-case data was analyzed. Results indicate that the preservice teachers modified their ideas to reflect the themes that were represented within the cases and modified their reflections to include specific ideas or examples taken directly from the case discussions. Comparing pre- and post-case reflections, the data supports a noted change in how the preservice teachers interpreted the case content. The preservice teachers began to evaluate the case content, question the lack of formative assessment concepts and strategies within the case, and apply formative assessment concepts and strategies within their own case descriptions. The results of this study further strengthen the existing literature on formative assessment instruction in preservice teacher education, and support the call for further attention given to utilizing case methodology to improve preservice teachers' knowledge of the formative assessment process.

Methods to control for unmeasured confounding in pharmacoepidemiology: an overview.

PubMed

Uddin, Md Jamal; Groenwold, Rolf H H; Ali, Mohammed Sanni; de Boer, Anthonius; Roes, Kit C B; Chowdhury, Muhammad A B; Klungel, Olaf H

2016-06-01

Background Unmeasured confounding is one of the principal problems in pharmacoepidemiologic studies. Several methods have been proposed to detect or control for unmeasured confounding either at the study design phase or the data analysis phase. Aim of the Review To provide an overview of commonly used methods to detect or control for unmeasured confounding and to provide recommendations for proper application in pharmacoepidemiology. Methods/Results Methods to control for unmeasured confounding in the design phase of a study are case only designs (e.g., case-crossover, case-time control, self-controlled case series) and the prior event rate ratio adjustment method. Methods that can be applied in the data analysis phase include, negative control method, perturbation variable method, instrumental variable methods, sensitivity analysis, and ecological analysis. A separate group of methods are those in which additional information on confounders is collected from a substudy. The latter group includes external adjustment, propensity score calibration, two-stage sampling, and multiple imputation. Conclusion As the performance and application of the methods to handle unmeasured confounding may differ across studies and across databases, we stress the importance of using both statistical evidence and substantial clinical knowledge for interpretation of the study results.

Addressing the Person of the Therapist in Supervision: The Therapist's Inner Conversation Method.

PubMed

Rober, Peter

2017-06-01

In this study a method of retrospective case supervision is presented aimed at helping the supervisee to become a better self-supervisor. The method pays special attention to the therapist's self-reflection and has the therapist's inner conversation as a central concept. The starting point of the method is an assignment in which the supervisee reflects on a case using a tape-assisted recall procedure. The method helps trainees to develop experiential expertise to become more flexible and effective therapists. A case example of one training group of novice family therapists illustrates the use of the method. © 2016 Family Process Institute.

Adding a Time-Series Design Element to the Success Case Method to Improve Methodological Rigor: An Application for Nonprofit Program Evaluation

ERIC Educational Resources Information Center

Coryn, Chris L. S.; Schroter, Daniela C.; Hanssen, Carl E.

2009-01-01

Brinkerhoff's Success Case Method (SCM) was developed with the specific purpose of assessing the impact of organizational interventions (e.g., training and coaching) on business goals by analyzing extreme groups using case study techniques and storytelling. As an efficient and cost-effective method of evaluative inquiry, SCM is attractive in other…

The Use of Qualitative Case Studies as an Experiential Teaching Method in the Training of Pre-Service Teachers

ERIC Educational Resources Information Center

Arseven, Ilhami

2018-01-01

This study presents the suitability of case studies, which is a qualitative research method and can be used as a teaching method in the training of pre-service teachers, for experiential learning theory. The basic view of experiential learning theory on learning and the qualitative case study paradigm are consistent with each other within the…

Leapfrog variants of iterative methods for linear algebra equations

NASA Technical Reports Server (NTRS)

Saylor, Paul E.

1988-01-01

Two iterative methods are considered, Richardson's method and a general second order method. For both methods, a variant of the method is derived for which only even numbered iterates are computed. The variant is called a leapfrog method. Comparisons between the conventional form of the methods and the leapfrog form are made under the assumption that the number of unknowns is large. In the case of Richardson's method, it is possible to express the final iterate in terms of only the initial approximation, a variant of the iteration called the grand-leap method. In the case of the grand-leap variant, a set of parameters is required. An algorithm is presented to compute these parameters that is related to algorithms to compute the weights and abscissas for Gaussian quadrature. General algorithms to implement the leapfrog and grand-leap methods are presented. Algorithms for the important special case of the Chebyshev method are also given.

30 CFR 77.701-2 - Approved methods of grounding metallic frames, casings, and other enclosures of electric...

Code of Federal Regulations, 2012 CFR

2012-07-01

... enclosures and the earth. (b) A method of grounding of metallic frames, casings, and other enclosures of... there is no difference in potential between such frames, casings, and other enclosures, and the earth. ...

A prevalence-based association test for case-control studies.

PubMed

Ryckman, Kelli K; Jiang, Lan; Li, Chun; Bartlett, Jacquelaine; Haines, Jonathan L; Williams, Scott M

2008-11-01

Genetic association is often determined in case-control studies by the differential distribution of alleles or genotypes. Recent work has demonstrated that association can also be assessed by deviations from the expected distributions of alleles or genotypes. Specifically, multiple methods motivated by the principles of Hardy-Weinberg equilibrium (HWE) have been developed. However, these methods do not take into account many of the assumptions of HWE. Therefore, we have developed a prevalence-based association test (PRAT) as an alternative method for detecting association in case-control studies. This method, also motivated by the principles of HWE, uses an estimated population allele frequency to generate expected genotype frequencies instead of using the case and control frequencies separately. Our method often has greater power, under a wide variety of genetic models, to detect association than genotypic, allelic or Cochran-Armitage trend association tests. Therefore, we propose PRAT as a powerful alternative method of testing for association.

CASE STUDY RESEARCH: THE VIEW FROM COMPLEXITY SCIENCE

PubMed Central

Anderson, Ruth; Crabtree, Benjamin F.; Steele, David J.; McDaniel, Reuben R.

2005-01-01

Many wonder why there has been so little change in care quality, despite substantial quality improvement efforts. Questioning why current approaches are not making true changes draws attention to the organization as a source of answers. We bring together the case study method and complexity science to suggest new ways to study health care organizations. The case study provides a method for studying systems. Complexity theory suggests that keys to understanding the system are contained in patterns of relationships and interactions among the system’s agents. We propose some of the “objects” of study that are implicated by complexity theory and discuss how studying these using case methods may provide useful maps of the system. We offer complexity theory, partnered with case study method, as a place to begin the daunting task of studying a system as an integrated whole. PMID:15802542

Evaluating statistical and clinical significance of intervention effects in single-case experimental designs: an SPSS method to analyze univariate data.

PubMed

Maric, Marija; de Haan, Else; Hogendoorn, Sanne M; Wolters, Lidewij H; Huizenga, Hilde M

2015-03-01

Single-case experimental designs are useful methods in clinical research practice to investigate individual client progress. Their proliferation might have been hampered by methodological challenges such as the difficulty applying existing statistical procedures. In this article, we describe a data-analytic method to analyze univariate (i.e., one symptom) single-case data using the common package SPSS. This method can help the clinical researcher to investigate whether an intervention works as compared with a baseline period or another intervention type, and to determine whether symptom improvement is clinically significant. First, we describe the statistical method in a conceptual way and show how it can be implemented in SPSS. Simulation studies were performed to determine the number of observation points required per intervention phase. Second, to illustrate this method and its implications, we present a case study of an adolescent with anxiety disorders treated with cognitive-behavioral therapy techniques in an outpatient psychotherapy clinic, whose symptoms were regularly assessed before each session. We provide a description of the data analyses and results of this case study. Finally, we discuss the advantages and shortcomings of the proposed method. Copyright © 2014. Published by Elsevier Ltd.

Detection of clonal aberrations by cytogenetic analysis after different culture methods and by FISH in 129 patients with Chronic Lymphocytic Leukemia.

PubMed

Jenderny, Jutta; Goldmann, Claudia; Thede, Rebekka; Ebrecht, Monika; Korioth, Frank

2014-01-01

There are only a few cytogenetic analysis (CA) studies that directly compare the novel cultivation technique using immunostimulatory CpG-oligonucleotide DSP30/interleukin-2 (DSP30/IL2) with other culture methods. Therefore, parallel cultures of peripheral blood of 129 chronic lymphocytic leukemia (CLL) patients were set up in unstimulated cultures, in the presence of pokeweed medium (PWM), and with DSP30/IL2. Furthermore, CA results were compared with data obtained by FISH. Clonal aberrations were observed by CA in 6% of the cases in unstimulated cultures, in 27% of the cases with PWM, and in 40% of the cases with DSP30/IL2. Some clonal aberrations were detected by CA only with one culture method. Using 3 different culture methods, clonal aberrations were detected in 41% of the cases by CA and in 71% of the cases by FISH. Altogether, 78% of the cases exhibited clonal aberrations discovered by CA and FISH. Also, CA detected clonal aberrations not targeted by FISH in 7% of the cases, and FISH identified clonal aberrations not detected by CA in 36% of the cases. Our study demonstrates that the combined use of CA with different culture methods together with FISH increases our knowledge of the genetic complexity and heterogeneity in CLL pathogenesis. © 2014 S. Karger AG, Basel.

Ethical case deliberation on the ward. A comparison of four methods.

PubMed

Steinkamp, Norbert; Gordijn, Bert

2003-01-01

The objective of this article is to analyse and compare four methods of ethical case deliberation. These include Clinical Pragmatism, The Nijmegen Method of ethical case deliberation, Hermeneutic dialogue, and Socratic dialogue. The origin of each method will be briefly sketched. Furthermore, the methods as well as the related protocols will be presented. Each method will then be evaluated against the background of those situations in which it is being used. The article aims to show that there is not one ideal method of ethical case deliberation, which fits to all possible kinds of moral problems. Rather, as each of the methods highlights a limited number of morally relevant aspects, each method has its strengths and weaknesses as well. These strengths and weaknesses should be evaluated in relation to different types of situations, for instance moral problems in treatment decisions, moral uneasiness and residue, and the like. The suggestion arrived at on the basis of the findings of this paper is a reasonable methodological plurality. This means that a method can be chosen depending on the type of moral problem to be deliberated upon. At the same time it means, that by means of a method, deliberation should be facilitated.

Application of the critical pathway and integrated case teaching method to nursing orientation.

PubMed

Goodman, D

1997-01-01

Nursing staff development programs must be responsive to current changes in healthcare. New nursing staff must be prepared to manage continuous change and to function competently in clinical practice. The orientation pathway, based on a case management model, is used as a structure for the orientation phase of staff development. The integrated case is incorporated as a teaching strategy in orientation. The integrated case method is based on discussion and analysis of patient situations with emphasis on role modeling and integration of theory and skill. The orientation pathway and integrated case teaching method provide a useful framework for orientation of new staff. Educators, preceptors and orientees find the structure provided by the orientation pathway very useful. Orientation that is developed, implemented and evaluated based on a case management model with the use of an orientation pathway and incorporation of an integrated case teaching method provides a standardized structure for orientation of new staff. This approach is designed for the adult learner, promotes conceptual reasoning, and encourages the social and contextual basis for continued learning.

Training and capacity building evaluation: Maximizing resources and results with Success Case Method.

PubMed

Medina, L; Acosta-Pérez, E; Velez, C; Martínez, G; Rivera, M; Sardiñas, L; Pattatucci, A

2015-10-01

This article describes the use of Success Case Method (Brinkerhoff, 2003) to evaluate health promotion and public health training programs. The goal of the Office Community Research and Engagement (OCRE) of the Puerto Rico Clinical and Translational Research Consortium (PRCTRC) is to establish a stable and sustainable translational research capacity. Early efforts toward achieving this goal included sponsoring two independent research training programs. A description of the implementation of the five step Success Case Method is presented. Results reveal that SCM would deem both trainings as highly successful, based upon the overall impact of a low number of success cases. However, a traditional summative evaluation would consider this disappointing. Strengths of SCM are discussed. It was concluded that the Success Case Method is a useful and valuable evaluative method for measuring the success of health promotion and public health training initiatives and provides sufficient information for decision-making processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dendritic cells (DCs) can be successfully generated from leukemic blasts in individual patients with AML or MDS: an evaluation of different methods.

PubMed

Kremser, Andreas; Dressig, Julia; Grabrucker, Christine; Liepert, Anja; Kroell, Tanja; Scholl, Nina; Schmid, Christoph; Tischer, Johanna; Kufner, Stefanie; Salih, Helmut; Kolb, Hans Jochem; Schmetzer, Helga

2010-01-01

Myeloid-leukemic cells (AML, MDS, CML) can be differentiated to leukemia-derived dendritic cell [DC (DCleu)] potentially presenting the whole leukemic antigen repertoire without knowledge of distinct leukemia antigens and are regarded as promising candidates for a vaccination strategy. We studied the capability of 6 serum-free DC culture methods, chosen according to different mechanisms, to induce DC differentiation in 137 cases of AML and 52 cases of MDS. DC-stimulating substances were cytokines ("standard-medium", "MCM-Mimic", "cytokine-method"), bacterial lysates ("Picibanil"), double-stranded RNA ["Poly (I:C)"] or a cytokine bypass method ("Ca-ionophore"). The quality/quantity of DC generated was estimated by flow cytometry studying (co) expressions of "DC"antigens, costimulatory, maturation, and blast-antigens. Comparing these methods on average 15% to 32% DC, depending on methods used, could be obtained from blast-containing mononuclear cells (MNC) in AML/MDS cases with a DC viability of more than 60%. In all, 39% to 64% of these DC were mature; 31% to 52% of leukemic blasts could be converted to DCleu and DCleu-proportions in the suspension were 2% to 70% (13%). Average results of all culture methods tested were comparable, however not every given case of AML could be differentiated to DC with 1 selected method. However performing a pre-analysis with 3 DC-generating methods (MCM-Mimic, Picibanil, Ca-ionophore) we could generate DC in any given case. Functional analyses provided proof, that DC primed T cells to antileukemia-directed cytotoxic cells, although an anti-leukemic reaction was not achieved in every case. In summary our data show that a successful, quantitative DC/DCleu generation is possible with the best of 3 previously tested methods in any given case. Reasons for different functional behaviors of DC-primed T cells must be evaluated to design a practicable DC-based vaccination strategy.

System and method for removal of buried objects

DOEpatents

Alexander, Robert G [Richland, WA; Crass, Dennis [Kennewick, WA; Grams, William [Kennewick, WA; Phillips, Steven J [Sunnyside, WA; Riess, Mark [Kennewick, WA

2008-06-03

The present invention is a system and method for removal of buried objects. According to one embodiment of the invention, a crane with a vibrator casing driver is used to lift and suspend a large diameter steel casing over the buried object. Then the casing is driven into the ground by the vibratory driver until the casing surrounds the buried object. Then the open bottom of the casing is sealed shut by injecting grout into the ground within the casing near its bottom. When the seal has cured and hardened, the top of the casing is lifted to retrieve the casing, with the buried object inside, from the ground.

Case Study Research Methodology in Nursing Research.

PubMed

Cope, Diane G

2015-11-01

Through data collection methods using a holistic approach that focuses on variables in a natural setting, qualitative research methods seek to understand participants' perceptions and interpretations. Common qualitative research methods include ethnography, phenomenology, grounded theory, and historic research. Another type of methodology that has a similar qualitative approach is case study research, which seeks to understand a phenomenon or case from multiple perspectives within a given real-world context.

[Application of case-based method in genetics and eugenics teaching].

PubMed

Li, Ya-Xuan; Zhao, Xin; Zhang, Fei-Xiong; Hu, Ying-Kao; Yan, Yue-Ming; Cai, Min-Hua; Li, Xiao-Hui

2012-05-01

Genetics and Eugenics is a cross-discipline between genetics and eugenics. It is a common curriculum in many Chinese universities. In order to increase the learning interest, we introduced case teaching method and got a better teaching effect. Based on our teaching practices, we summarized some experiences about this subject. In this article, the main problem of case-based method applied in Genetics and Eugenics teaching was discussed.

Analytical Tools for the Application of Operational Culture: A Case Study in the Trans-Sahel

DTIC Science & Technology

2011-03-28

Study Team Working Paper 3: Research Methods Discussion for the Study Team Methods229 Generating Empirical Materials In grounded theory ... research I have conducted using these methods . UNCLASSIFIED Analytical Tools for the Application of Operational Culture: A Case Study in the...Survey and a Case Study ,‖ Kjeller, Norway: FFI Glaser, B. G. & Strauss, A. L. (1967). ―The discovery of grounded theory

Bad Blood.

ERIC Educational Resources Information Center

Fourtner, Ann W.; And Others

1994-01-01

Describes a case study of the Tuskegee Syphilis project to help demonstrate the use of the case study method in instruction. This is one of a series of articles written to stimulate interest in and discussion about the use of the case study method in teaching undergraduate-level science. (ZWH)

Incorporating ITS into transportation improvement planning : the Seattle Case Study using PRUEVIIN

DOT National Transportation Integrated Search

1998-01-01

This project explored methods to analyze ITS strategies within Major Investment Study (MIS) studies and to apply them in a case study. The case study developed methods to define alternatives, and to estimate impacts and costs at the level required fo...

Knowledge, beliefs and use of nursing methods in preventing pressure sores in Dutch hospitals.

PubMed

Halfens, R J; Eggink, M

1995-02-01

Different methods have been developed in the past to prevent patients from developing pressure sores. The consensus guidelines developed in the Netherlands make a distinction between preventive methods useful for all patients, methods useful only in individual cases, and methods which are not useful at all. This study explores the extent of use of the different methods within Dutch hospitals, and the knowledge and beliefs of nurses regarding the usefulness of these methods. A mail questionnaire was sent to a representative sample of nurses working within Dutch hospitals. A total of 373 questionnaires were returned and used for the analyses. The results showed that many methods judged by the consensus report as not useful, or only useful in individual cases, are still being used. Some methods which are judged as useful, like the use of a risk assessment scale, are used on only a few wards. The opinion of nurses regarding the usefulness of the methods differ from the guidelines of the consensus committee. Although there is agreement about most of the useful methods, there is less agreement about the methods which are useful in individual cases or methods which are not useful at all. In particular the use of massage and cream are, in the opinion of the nurses, useful in individual or in all cases.

Bioethics education in clinical settings: theory and practice of the dilemma method of moral case deliberation.

PubMed

Stolper, Margreet; Molewijk, Bert; Widdershoven, Guy

2016-07-22

Moral Case Deliberation is a specific form of bioethics education fostering professionals' moral competence in order to deal with their moral questions. So far, few studies focus in detail on Moral Case Deliberation methodologies and their didactic principles. The dilemma method is a structured and frequently used method in Moral Case Deliberation that stimulates methodological reflection and reasoning through a systematic dialogue on an ethical issue experienced in practice. In this paper we present a case-study of a Moral Case Deliberation with the dilemma method in a health care institution for people with an intellectual disability, describing the theoretical background and the practical application of the dilemma method. The dilemma method focuses on moral experiences of participants concerning a concrete dilemma in practice. By an in-depth description of each of the steps of the deliberation process, we elucidate the educational value and didactics of this specific method. The didactics and methodical steps of the dilemma method both supported and structured the dialogical reflection process of the participants. The process shows that the participants learned to recognize the moral dimension of the issue at stake and were able to distinguish various perspectives and reasons in a systematic manner. The facilitator played an important role in the learning process of the participants, by assisting them in focusing on and exploring moral aspects of the case. The reflection and learning process, experienced by the participants, shows competency-based characteristics. The role of the facilitator is that of a Socratic teacher with specific knowledge and skills, fostering reflection, inquiry and dialogue. The specific didactics of the dilemma method is well suited for teaching bioethics in clinical settings. The dilemma method follows an inductive learning approach through a dialogical moral inquiry in which participants develop not only knowledge but also skills, attitude and character. The role of a trained facilitator and a specific view on teaching and practicing ethics are essential when using the dilemma method in teaching health care professionals how to reflect on their own moral issues in practice.

Dental extrusion with orthodontic miniscrew anchorage: a case report describing a modified method.

PubMed

Horliana, Ricardo Fidos; Horliana, Anna Carolina Ratto Tempestini; Wuo, Alexandre do Vale; Perez, Flávio Eduardo Guillin; Abrão, Jorge

2015-01-01

In recent years, the skeletal anchorage through miniscrews has expanded the treatment options in orthodontics (Yamaguchi et al., 2012). We hereby present a modified method for tooth extrusion for cases where crown-lengthening surgery is contraindicated for aesthetic reasons. This modified method uses three orthodontic appliances: a mini-implant, an orthodontic wire, and a bracket. The aim of this case report was to increase the length of the clinical crown of a fractured tooth (tooth 23) by means of an orthodontic extrusion with the modified method of Roth and Diedrich.

Rare variant association analysis in case-parents studies by allowing for missing parental genotypes.

PubMed

Li, Yumei; Xiang, Yang; Xu, Chao; Shen, Hui; Deng, Hongwen

2018-01-15

The development of next-generation sequencing technologies has facilitated the identification of rare variants. Family-based design is commonly used to effectively control for population admixture and substructure, which is more prominent for rare variants. Case-parents studies, as typical strategies in family-based design, are widely used in rare variant-disease association analysis. Current methods in case-parents studies are based on complete case-parents data; however, parental genotypes may be missing in case-parents trios, and removing these data may lead to a loss in statistical power. The present study focuses on testing for rare variant-disease association in case-parents study by allowing for missing parental genotypes. In this report, we extended the collapsing method for rare variant association analysis in case-parents studies to allow for missing parental genotypes, and investigated the performance of two methods by using the difference of genotypes between affected offspring and their corresponding "complements" in case-parent trios and TDT framework. Using simulations, we showed that, compared with the methods just only using complete case-parents data, the proposed strategy allowing for missing parental genotypes, or even adding unrelated affected individuals, can greatly improve the statistical power and meanwhile is not affected by population stratification. We conclude that adding case-parents data with missing parental genotypes to complete case-parents data set can greatly improve the power of our strategy for rare variant-disease association.

Interactive Learning: The Casewriting Method as an Entire Semester Course for Higher Education.

ERIC Educational Resources Information Center

Bowen, Brent D.

This guide explains the reasons for employing the case method as a tool in the academic discipline of aviation. It promotes the use of case writing as a unique opportunity to derive even further benefits from case analysis. The benefits to students of using case writing as a learning strategy include a focus on the strategy of a real situation;…

Multiple imputation of missing data in nested case-control and case-cohort studies.

PubMed

Keogh, Ruth H; Seaman, Shaun R; Bartlett, Jonathan W; Wood, Angela M

2018-06-05

The nested case-control and case-cohort designs are two main approaches for carrying out a substudy within a prospective cohort. This article adapts multiple imputation (MI) methods for handling missing covariates in full-cohort studies for nested case-control and case-cohort studies. We consider data missing by design and data missing by chance. MI analyses that make use of full-cohort data and MI analyses based on substudy data only are described, alongside an intermediate approach in which the imputation uses full-cohort data but the analysis uses only the substudy. We describe adaptations to two imputation methods: the approximate method (MI-approx) of White and Royston () and the "substantive model compatible" (MI-SMC) method of Bartlett et al. (). We also apply the "MI matched set" approach of Seaman and Keogh () to nested case-control studies, which does not require any full-cohort information. The methods are investigated using simulation studies and all perform well when their assumptions hold. Substantial gains in efficiency can be made by imputing data missing by design using the full-cohort approach or by imputing data missing by chance in analyses using the substudy only. The intermediate approach brings greater gains in efficiency relative to the substudy approach and is more robust to imputation model misspecification than the full-cohort approach. The methods are illustrated using the ARIC Study cohort. Supplementary Materials provide R and Stata code. © 2018, The International Biometric Society.

Fungal Rhinosinusitis: Microbiological and Histopathological Perspective

PubMed Central

Singh, Ajay Kumar; Verma, Nitya; Khare, Vineeta; Ahamad, Abrar; Verma, Virendra; Agarwal, S.P

2017-01-01

Introduction On the basis of histopathology Fungal Rhinosinusitis (FRS) is categorized into non-invasive (allergic fungal rhinosinusitis, fungal ball) and invasive (acute invasive, chronic invasive and granulomatous invasive fungal sinusitis). This differentiation helps to decide the treatment. Role of latest molecular methods such as PCR and conventional methods such as KOH microscopy and culture also needs to be evaluated. Therefore, in this study we planned to categorise fungal rhinosinusitis on the basis of histopathology and compare it with other methods such as PCR, culture and KOH microscopy. Aim To analyse fungal rhinosinusitis cases by both histopathologically and microbiologically. Materials and Methods A total of 76 clinically suspected fungal rhinosinusitis cases were included in the study. The tissue of suspected cases were processed and examined by KOH microscopy, histopathologically, culture and PCR. Histopathological examination was done by PAS, GMS and H&E stain. Results FRS was diagnosed in 37 (48.68%) cases out of 76 clinically suspected cases of FRS. In which 17 (22.3%) cases were positive by direct microscopy, 21 (27.6%) by culture, 27 (35.5%) by PCR and 14 (18.42%) by histopathology. Approximately 14 cases of FRS were classified according to histopathology; 10 (71.3%) as non-invasive FRS. Out of these 10, 9 (64.2%) were classified as AFRS and 1 (7.14%) as fungal ball. Only 4 cases (28.5%) were diagnosed with invasive FRS. Out of these 4 cases, 2 (14.2%) were of chronic invasive fungal rhinosinusitis, 1 (7.14%) was of granulomatous invasive fungal rhinosinusitis and 1 (7.14%) was of acute fulminant invasive fungal rhinosinusitis. Allergic Fungal Rhinosinusitis (AFRS) is the most common type of FRS. Aspergillus flavus was found to be the most common fungi causing FRS. Conclusion Diagnosis should not be based on the single method. It should be done by both histopathological and microbiological methods, especially for those cases which are difficult to diagnose. PMID:28892889

Peripleural lung disease detection based on multi-slice CT images

NASA Astrophysics Data System (ADS)

Matsuhiro, M.; Suzuki, H.; Kawata, Y.; Niki, N.; Nakano, Y.; Ohmatsu, H.; Kusumoto, M.; Tsuchida, T.; Eguchi, K.; Kaneko, M.

2015-03-01

With the development of multi-slice CT technology, obtaining accurate 3D images of lung field in a short time become possible. To support that, a lot of image processing methods need to be developed. Detection peripleural lung disease is difficult due to its existence out of lung region, because lung extraction is often performed based on threshold processing. The proposed method uses thoracic inner region extracted by inner cavity of bone as well as air region, covers peripleural lung diseased cases such as lung nodule, calcification, pleural effusion and pleural plaque. We applied this method to 50 cases including 39 peripleural lung diseased cases. This method was able to detect 39 peripleural lung disease with 2.9 false positive per case.

HIV quality report cards: impact of case-mix adjustment and statistical methods.

PubMed

Ohl, Michael E; Richardson, Kelly K; Goto, Michihiko; Vaughan-Sarrazin, Mary; Schweizer, Marin L; Perencevich, Eli N

2014-10-15

There will be increasing pressure to publicly report and rank the performance of healthcare systems on human immunodeficiency virus (HIV) quality measures. To inform discussion of public reporting, we evaluated the influence of case-mix adjustment when ranking individual care systems on the viral control quality measure. We used data from the Veterans Health Administration (VHA) HIV Clinical Case Registry and administrative databases to estimate case-mix adjusted viral control for 91 local systems caring for 12 368 patients. We compared results using 2 adjustment methods, the observed-to-expected estimator and the risk-standardized ratio. Overall, 10 913 patients (88.2%) achieved viral control (viral load ≤400 copies/mL). Prior to case-mix adjustment, system-level viral control ranged from 51% to 100%. Seventeen (19%) systems were labeled as low outliers (performance significantly below the overall mean) and 11 (12%) as high outliers. Adjustment for case mix (patient demographics, comorbidity, CD4 nadir, time on therapy, and income from VHA administrative databases) reduced the number of low outliers by approximately one-third, but results differed by method. The adjustment model had moderate discrimination (c statistic = 0.66), suggesting potential for unadjusted risk when using administrative data to measure case mix. Case-mix adjustment affects rankings of care systems on the viral control quality measure. Given the sensitivity of rankings to selection of case-mix adjustment methods-and potential for unadjusted risk when using variables limited to current administrative databases-the HIV care community should explore optimal methods for case-mix adjustment before moving forward with public reporting. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

77 FR 54935 - Government-Owned Inventions, Available for Licensing.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

...: Systems and Methods for Peak-Seeking Control Polarization-Induced Fading in Fiber-Optic System; NASA Case... FURTHER INFORMATION CONTACT: Mark W. Homer, Patent Counsel, NASA Management Office--JPL, 4800 Oak Grove...; NASA Case No. NPO-47580-1: Energy Harvesting Systems and Methods of Assembling Same; NASA Case No. NPO...

The clustering-based case-based reasoning for imbalanced business failure prediction: a hybrid approach through integrating unsupervised process with supervised process

NASA Astrophysics Data System (ADS)

Li, Hui; Yu, Jun-Ling; Yu, Le-An; Sun, Jie

2014-05-01

Case-based reasoning (CBR) is one of the main forecasting methods in business forecasting, which performs well in prediction and holds the ability of giving explanations for the results. In business failure prediction (BFP), the number of failed enterprises is relatively small, compared with the number of non-failed ones. However, the loss is huge when an enterprise fails. Therefore, it is necessary to develop methods (trained on imbalanced samples) which forecast well for this small proportion of failed enterprises and performs accurately on total accuracy meanwhile. Commonly used methods constructed on the assumption of balanced samples do not perform well in predicting minority samples on imbalanced samples consisting of the minority/failed enterprises and the majority/non-failed ones. This article develops a new method called clustering-based CBR (CBCBR), which integrates clustering analysis, an unsupervised process, with CBR, a supervised process, to enhance the efficiency of retrieving information from both minority and majority in CBR. In CBCBR, various case classes are firstly generated through hierarchical clustering inside stored experienced cases, and class centres are calculated out by integrating cases information in the same clustered class. When predicting the label of a target case, its nearest clustered case class is firstly retrieved by ranking similarities between the target case and each clustered case class centre. Then, nearest neighbours of the target case in the determined clustered case class are retrieved. Finally, labels of the nearest experienced cases are used in prediction. In the empirical experiment with two imbalanced samples from China, the performance of CBCBR was compared with the classical CBR, a support vector machine, a logistic regression and a multi-variant discriminate analysis. The results show that compared with the other four methods, CBCBR performed significantly better in terms of sensitivity for identifying the minority samples and generated high total accuracy meanwhile. The proposed approach makes CBR useful in imbalanced forecasting.

A combination of immunohistochemistry and molecular approaches improves highly sensitive detection of BRAF mutations in papillary thyroid cancer.

PubMed

Martinuzzi, Claudia; Pastorino, Lorenza; Andreotti, Virginia; Garuti, Anna; Minuto, Michele; Fiocca, Roberto; Bianchi-Scarrà, Giovanna; Ghiorzo, Paola; Grillo, Federica; Mastracci, Luca

2016-09-01

The optimal method for BRAF mutation detection remains to be determined despite advances in molecular detection techniques. The aim of this study was to compare, against classical Sanger sequencing, the diagnostic performance of two of the most recently developed, highly sensitive methods: BRAF V600E immunohistochemistry (IHC) and peptide nucleic-acid (PNA)-clamp qPCR. BRAF exon 15 mutations were searched in formalin-fixed paraffin-embedded tissues from 86 papillary thyroid carcinoma using the three methods. The limits of detection of Sanger sequencing in borderline or discordant cases were quantified by next generation sequencing. BRAF mutations were found in 74.4 % of cases by PNA, in 71 % of cases by IHC, and in 64 % of cases by Sanger sequencing. Complete concordance for the three methods was observed in 80 % of samples. Better concordance was observed with the combination of two methods, particularly PNA and IHC (59/64) (92 %), while the combination of PNA and Sanger was concordant in 55 cases (86 %). Sensitivity of the three methods was 99 % for PNA, 94.2 % for IHC, and 89.5 % for Sanger. Our data show that IHC could be used as a cost-effective, first-line method for BRAF V600E detection in daily practice, followed by PNA analysis in negative or uninterpretable cases, as the most efficient method. PNA-clamp quantitative PCR is highly sensitive and complementary to IHC as it also recognizes other mutations besides V600E and it is suitable for diagnostic purposes.

Comparing the Principle-Based SBH Maieutic Method to Traditional Case Study Methods of Teaching Media Ethics

ERIC Educational Resources Information Center

Grant, Thomas A.

2012-01-01

This quasi-experimental study at a Northwest university compared two methods of teaching media ethics, a class taught with the principle-based SBH Maieutic Method (n = 25) and a class taught with a traditional case study method (n = 27), with a control group (n = 21) that received no ethics training. Following a 16-week intervention, a one-way…

Statistical methods for analysis of radiation effects with tumor and dose location-specific information with application to the WECARE study of asynchronous contralateral breast cancer

PubMed Central

Langholz, Bryan; Thomas, Duncan C.; Stovall, Marilyn; Smith, Susan A.; Boice, John D.; Shore, Roy E.; Bernstein, Leslie; Lynch, Charles F.; Zhang, Xinbo; Bernstein, Jonine L.

2009-01-01

Summary Methods for the analysis of individually matched case-control studies with location-specific radiation dose and tumor location information are described. These include likelihood methods for analyses that just use cases with precise location of tumor information and methods that also include cases with imprecise tumor location information. The theory establishes that each of these likelihood based methods estimates the same radiation rate ratio parameters, within the context of the appropriate model for location and subject level covariate effects. The underlying assumptions are characterized and the potential strengths and limitations of each method are described. The methods are illustrated and compared using the WECARE study of radiation and asynchronous contralateral breast cancer. PMID:18647297

Bias correction of risk estimates in vaccine safety studies with rare adverse events using a self-controlled case series design.

PubMed

Zeng, Chan; Newcomer, Sophia R; Glanz, Jason M; Shoup, Jo Ann; Daley, Matthew F; Hambidge, Simon J; Xu, Stanley

2013-12-15

The self-controlled case series (SCCS) method is often used to examine the temporal association between vaccination and adverse events using only data from patients who experienced such events. Conditional Poisson regression models are used to estimate incidence rate ratios, and these models perform well with large or medium-sized case samples. However, in some vaccine safety studies, the adverse events studied are rare and the maximum likelihood estimates may be biased. Several bias correction methods have been examined in case-control studies using conditional logistic regression, but none of these methods have been evaluated in studies using the SCCS design. In this study, we used simulations to evaluate 2 bias correction approaches-the Firth penalized maximum likelihood method and Cordeiro and McCullagh's bias reduction after maximum likelihood estimation-with small sample sizes in studies using the SCCS design. The simulations showed that the bias under the SCCS design with a small number of cases can be large and is also sensitive to a short risk period. The Firth correction method provides finite and less biased estimates than the maximum likelihood method and Cordeiro and McCullagh's method. However, limitations still exist when the risk period in the SCCS design is short relative to the entire observation period.

A Case Study of a Mixed Methods Study Engaged in Integrated Data Analysis

ERIC Educational Resources Information Center

Schiazza, Daniela Marie

2013-01-01

The nascent field of mixed methods research has yet to develop a cohesive framework of guidelines and procedures for mixed methods data analysis (Greene, 2008). To support the field's development of analytical frameworks, this case study reflects on the development and implementation of a mixed methods study engaged in integrated data analysis.…

The Philosophical Foundation of the Lecture Method of Instruction and the Case Method of Instruction: Implications for Examinations

ERIC Educational Resources Information Center

Ardalan, Kavous

2013-01-01

Any adequate comparison between the lecture method of instruction and the case method of instruction necessarily requires a comparison of their underlying philosophical foundation and methodology. This is based on the premise that foundational philosophies or world views underlie educational philosophies, and each educational philosophy favors a…

A path-level exact parallelization strategy for sequential simulation

NASA Astrophysics Data System (ADS)

Peredo, Oscar F.; Baeza, Daniel; Ortiz, Julián M.; Herrero, José R.

2018-01-01

Sequential Simulation is a well known method in geostatistical modelling. Following the Bayesian approach for simulation of conditionally dependent random events, Sequential Indicator Simulation (SIS) method draws simulated values for K categories (categorical case) or classes defined by K different thresholds (continuous case). Similarly, Sequential Gaussian Simulation (SGS) method draws simulated values from a multivariate Gaussian field. In this work, a path-level approach to parallelize SIS and SGS methods is presented. A first stage of re-arrangement of the simulation path is performed, followed by a second stage of parallel simulation for non-conflicting nodes. A key advantage of the proposed parallelization method is to generate identical realizations as with the original non-parallelized methods. Case studies are presented using two sequential simulation codes from GSLIB: SISIM and SGSIM. Execution time and speedup results are shown for large-scale domains, with many categories and maximum kriging neighbours in each case, achieving high speedup results in the best scenarios using 16 threads of execution in a single machine.

ABO Mistyping of cis-AB Blood Group by the Automated Microplate Technique.

PubMed

Chun, Sejong; Ryu, Mi Ra; Cha, Seung-Yeon; Seo, Ji-Young; Cho, Duck

2018-01-01

The cis -AB phenotype, although rare, is the relatively most frequent of ABO subgroups in Koreans. To prevent ABO mistyping of cis -AB samples, our hospital has applied a combination of the manual tile method with automated devices. Herein, we report cases of ABO mistyping detected by the combination testing system. Cases that showed discrepant results by automated devices and the manual tile method were evaluated. These samples were also tested by the standard tube method. The automated devices used in this study were a QWALYS-3 and Galileo NEO. Exons 6 and 7 of the ABO gene were sequenced. 13 cases that had the cis -AB allele showed results suggestive of the cis -AB subgroup by manual methods, but were interpreted as AB by either automated device. This happened in 87.5% of these cases by QWALYS-3 and 70.0% by Galileo NEO. Genotyping results showed that 12 cases were ABO*cis-AB01/ABO*O01 or ABO*cis-AB01/ABO*O02 , and one case was ABO*cis-AB01/ ABO*A102. Cis -AB samples were mistyped as AB by the automated microplate technique in some cases. We suggest that the manual tile method can be a simple supplemental test for the detection of the cis -AB phenotype, especially in countries with relatively high cis- AB prevalence.

Case-control analysis in highway safety: Accounting for sites with multiple crashes.

PubMed

Gross, Frank

2013-12-01

There is an increased interest in the use of epidemiological methods in highway safety analysis. The case-control and cohort methods are commonly used in the epidemiological field to identify risk factors and quantify the risk or odds of disease given certain characteristics and factors related to an individual. This same concept can be applied to highway safety where the entity of interest is a roadway segment or intersection (rather than a person) and the risk factors of interest are the operational and geometric characteristics of a given roadway. One criticism of the use of these methods in highway safety is that they have not accounted for the difference between sites with single and multiple crashes. In the medical field, a disease either occurs or it does not; multiple occurrences are generally not an issue. In the highway safety field, it is necessary to evaluate the safety of a given site while accounting for multiple crashes. Otherwise, the analysis may underestimate the safety effects of a given factor. This paper explores the use of the case-control method in highway safety and two variations to account for sites with multiple crashes. Specifically, the paper presents two alternative methods for defining cases in a case-control study and compares the results in a case study. The first alternative defines a separate case for each crash in a given study period, thereby increasing the weight of the associated roadway characteristics in the analysis. The second alternative defines entire crash categories as cases (sites with one crash, sites with two crashes, etc.) and analyzes each group separately in comparison to sites with no crashes. The results are also compared to a "typical" case-control application, where the cases are simply defined as any entity that experiences at least one crash and controls are those entities without a crash in a given period. In a "typical" case-control design, the attributes associated with single-crash segments are weighted the same as the attributes of segments with multiple crashes. The results support the hypothesis that the "typical" case-control design may underestimate the safety effects of a given factor compared to methods that account for sites with multiple crashes. Compared to the first alternative case definition (where multiple crash segments represent multiple cases) the results from the "typical" case-control design are less pronounced (i.e., closer to unity). The second alternative (where case definitions are constructed for various crash categories and analyzed separately) provides further evidence that sites with single and multiple crashes should not be grouped together in a case-control analysis. This paper indicates a clear need to differentiate sites with single and multiple crashes in a case-control analysis. While the results suggest that sites with multiple crashes can be accounted for using a case-control design, further research is needed to determine the optimal method for addressing this issue. This paper provides a starting point for that research. Copyright © 2012 Elsevier Ltd. All rights reserved.

Applications of AN OO Methodology and Case to a Daq System

NASA Astrophysics Data System (ADS)

Bee, C. P.; Eshghi, S.; Jones, R.; Kolos, S.; Magherini, C.; Maidantchik, C.; Mapelli, L.; Mornacchi, G.; Niculescu, M.; Patel, A.; Prigent, D.; Spiwoks, R.; Soloviev, I.; Caprini, M.; Duval, P. Y.; Etienne, F.; Ferrato, D.; Le van Suu, A.; Qian, Z.; Gaponenko, I.; Merzliakov, Y.; Ambrosini, G.; Ferrari, R.; Fumagalli, G.; Polesello, G.

The RD13 project has evaluated the use of the Object Oriented Information Engineering (OOIE) method during the development of several software components connected to the DAQ system. The method is supported by a sophisticated commercial CASE tool (Object Management Workbench) and programming environment (Kappa) which covers the full life-cycle of the software including model simulation, code generation and application deployment. This paper gives an overview of the method, CASE tool, DAQ components which have been developed and we relate our experiences with the method and tool, its integration into our development environment and the spiral lifecycle it supports.

Applications of the Ultrasonic Serial Number Restoration Technique to Guns and Typical Stolen Articles

NASA Technical Reports Server (NTRS)

Young, S. G.

1976-01-01

An ultrasonic cavitation method for restoring obliterated serial numbers has been further explored by application to articles involved in police cases. The method was applied successfully to gun parts. In one case portions of numbers were restored after prior failure by other laboratories using chemical etching techniques. The ultrasonic method was not successful on a heavily obliterated and restamped automobile engine block, but it was partially successful on a motorcycle gear-case housing. Additional studies were made on the effect of a larger diameter ultrasonic probe, and on the method's ability to restore numbers obliterated by peening.

[The use of entomologic methods in determining the time of death--case studies].

PubMed

Kaczorowska, Elzbieta; Pieśniak, Dorota; Szczerkowska, Zofia

2004-01-01

This paper describes a number of cases in which the determination of the time of death was based on entomological methods. These cases took place in the Pomorskie Province, and the autopsies were carried out in the Department of Forensic Medicine, Medical University of Gdańsk.

Methods of operation of apparatus measuring formation resistivity from within a cased well having one measurement and two compensation steps

DOEpatents

Vail, III, William B.

1993-01-01

Methods of operation of an apparatus having at least two pairs of voltage measurement electrodes vertically disposed in a cased well to measure the resistivity of adjacent geological formations from inside the cased well. During stationary measurements with the apparatus at a fixed vertical depth within the cased well, the invention herein discloses methods of operation which include a measurement step and subsequent first and second compensation steps respectively resulting in improved accuracy of measurement. First and second order errors of measurement are identified, and the measurement step and two compensation steps provide methods to substantially eliminate their influence on the results. A multiple frequency apparatus adapted to movement within the well is described which simultaneously provide the measurement and two compensation steps.

Identifying Stakeholders and Their Preferences about NFR by Comparing Use Case Diagrams of Several Existing Systems

NASA Astrophysics Data System (ADS)

Kaiya, Haruhiko; Osada, Akira; Kaijiri, Kenji

We present a method to identify stakeholders and their preferences about non-functional requirements (NFR) by using use case diagrams of existing systems. We focus on the changes about NFR because such changes help stakeholders to identify their preferences. Comparing different use case diagrams of the same domain helps us to find changes to be occurred. We utilize Goal-Question-Metrics (GQM) method for identifying variables that characterize NFR, and we can systematically represent changes about NFR using the variables. Use cases that represent system interactions help us to bridge the gap between goals and metrics (variables), and we can easily construct measurable NFR. For validating and evaluating our method, we applied our method to an application domain of Mail User Agent (MUA) system.

Generalizing DTW to the multi-dimensional case requires an adaptive approach

PubMed Central

Hu, Bing; Jin, Hongxia; Wang, Jun; Keogh, Eamonn

2017-01-01

In recent years Dynamic Time Warping (DTW) has emerged as the distance measure of choice for virtually all time series data mining applications. For example, virtually all applications that process data from wearable devices use DTW as a core sub-routine. This is the result of significant progress in improving DTW’s efficiency, together with multiple empirical studies showing that DTW-based classifiers at least equal (and generally surpass) the accuracy of all their rivals across dozens of datasets. Thus far, most of the research has considered only the one-dimensional case, with practitioners generalizing to the multi-dimensional case in one of two ways, dependent or independent warping. In general, it appears the community believes either that the two ways are equivalent, or that the choice is irrelevant. In this work, we show that this is not the case. The two most commonly used multi-dimensional DTW methods can produce different classifications, and neither one dominates over the other. This seems to suggest that one should learn the best method for a particular application. However, we will show that this is not necessary; a simple, principled rule can be used on a case-by-case basis to predict which of the two methods we should trust at the time of classification. Our method allows us to ensure that classification results are at least as accurate as the better of the two rival methods, and, in many cases, our method is significantly more accurate. We demonstrate our ideas with the most extensive set of multi-dimensional time series classification experiments ever attempted. PMID:29104448

INITIAL IMPRESSIONS OF THE DIAGNOSTIC USE OF RADIOACTIVE PHOSPHORUS IN OPHTHALMOLOGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stankovic, M.

Out of 10 cases, the use of radioactive P established four cases of malignant growths on the retina that were histologically confirmed, but gave falsely positive results in two cases immediately after surgical intervention, and was negative in the other four cases. It was concluded that the method appears justified in diagnosing intraocular tumors if regarded as an auxiliary method and not as the decisive factor. (P.C.H.)

A Case Study of the Degree of Collaboration Between Various Levels in the Reparable Chain in the United States Air Force

DTIC Science & Technology

2005-03-01

qualitative research methods , a case study approach was selected to conduct this research . “A case study can be defined as an empirical study ... qualitative in nature, and also described the qualitative research method chosen as a case study . From 49 there, data collection was focused upon... qualitative nature of the research , a qualitative design was used to conduct the

Case Managers' Perspectives On What They Need To Do Their Job

PubMed Central

Eack, Shaun M.; Greeno, Catherine G.; Christian-Michaels, Stephen; Dennis, Amy; Anderson, Carol M.

2013-01-01

Objective To identify the perceived training needs of case managers working on community support teams in a community mental health center serving a semi-rural/suburban area. Methods Semi-structured interviews were conducted with 18 case managers and 3 supervisors to inquire about areas of training need in case management. Interviews were coded and analyzed for common themes regarding training needs and methods of training improvement. Results Identified training needs called for a hands-on, back to basics approach that included education on the symptoms of severe mental illness, co-morbid substance use problems, and methods of engaging consumers. A mentoring model was proposed as a potential vehicle for disseminating knowledge in these domains. Conclusions Case managers identify significant training needs that would address their basic understanding of severe mental illness. Programs targeting these needs may result in improved outcomes for case managers and the individuals with psychiatric disabilities. PMID:19346211

Clinical Case Studies in Psychoanalytic and Psychodynamic Treatment

PubMed Central

Willemsen, Jochem; Della Rosa, Elena; Kegerreis, Sue

2017-01-01

This manuscript provides a review of the clinical case study within the field of psychoanalytic and psychodynamic treatment. The method has been contested for methodological reasons and because it would contribute to theoretical pluralism in the field. We summarize how the case study method is being applied in different schools of psychoanalysis, and we clarify the unique strengths of this method and areas for improvement. Finally, based on the literature and on our own experience with case study research, we come to formulate nine guidelines for future case study authors: (1) basic information to include, (2) clarification of the motivation to select a particular patient, (3) information about informed consent and disguise, (4) patient background and context of referral or self-referral, (5) patient's narrative, therapist's observations and interpretations, (6) interpretative heuristics, (7) reflexivity and counter-transference, (8) leaving room for interpretation, and (9) answering the research question, and comparison with other cases. PMID:28210235

A Comparison of Two Approaches to Safety Analysis Based on Use Cases

NASA Astrophysics Data System (ADS)

Stålhane, Tor; Sindre, Guttorm

Engineering has a long tradition in analyzing the safety of mechanical, electrical and electronic systems. Important methods like HazOp and FMEA have also been adopted by the software engineering community. The misuse case method, on the other hand, has been developed by the software community as an alternative to FMEA and preliminary HazOp for software development. To compare the two methods misuse case and FMEA we have run a small experiment involving 42 third year software engineering students. In the experiment, the students should identify and analyze failure modes from one of the use cases for a commercial electronic patient journals system. The results of the experiment show that on the average, the group that used misuse cases identified and analyzed more user related failure modes than the persons using FMEA. In addition, the persons who used the misuse cases scored better on perceived ease of use and intention to use.

The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

PubMed

Torrens, George Edward

2018-01-01

Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

A power comparison of generalized additive models and the spatial scan statistic in a case-control setting.

PubMed

Young, Robin L; Weinberg, Janice; Vieira, Verónica; Ozonoff, Al; Webster, Thomas F

2010-07-19

A common, important problem in spatial epidemiology is measuring and identifying variation in disease risk across a study region. In application of statistical methods, the problem has two parts. First, spatial variation in risk must be detected across the study region and, second, areas of increased or decreased risk must be correctly identified. The location of such areas may give clues to environmental sources of exposure and disease etiology. One statistical method applicable in spatial epidemiologic settings is a generalized additive model (GAM) which can be applied with a bivariate LOESS smoother to account for geographic location as a possible predictor of disease status. A natural hypothesis when applying this method is whether residential location of subjects is associated with the outcome, i.e. is the smoothing term necessary? Permutation tests are a reasonable hypothesis testing method and provide adequate power under a simple alternative hypothesis. These tests have yet to be compared to other spatial statistics. This research uses simulated point data generated under three alternative hypotheses to evaluate the properties of the permutation methods and compare them to the popular spatial scan statistic in a case-control setting. Case 1 was a single circular cluster centered in a circular study region. The spatial scan statistic had the highest power though the GAM method estimates did not fall far behind. Case 2 was a single point source located at the center of a circular cluster and Case 3 was a line source at the center of the horizontal axis of a square study region. Each had linearly decreasing logodds with distance from the point. The GAM methods outperformed the scan statistic in Cases 2 and 3. Comparing sensitivity, measured as the proportion of the exposure source correctly identified as high or low risk, the GAM methods outperformed the scan statistic in all three Cases. The GAM permutation testing methods provide a regression-based alternative to the spatial scan statistic. Across all hypotheses examined in this research, the GAM methods had competing or greater power estimates and sensitivities exceeding that of the spatial scan statistic.

A power comparison of generalized additive models and the spatial scan statistic in a case-control setting

PubMed Central

2010-01-01

Background A common, important problem in spatial epidemiology is measuring and identifying variation in disease risk across a study region. In application of statistical methods, the problem has two parts. First, spatial variation in risk must be detected across the study region and, second, areas of increased or decreased risk must be correctly identified. The location of such areas may give clues to environmental sources of exposure and disease etiology. One statistical method applicable in spatial epidemiologic settings is a generalized additive model (GAM) which can be applied with a bivariate LOESS smoother to account for geographic location as a possible predictor of disease status. A natural hypothesis when applying this method is whether residential location of subjects is associated with the outcome, i.e. is the smoothing term necessary? Permutation tests are a reasonable hypothesis testing method and provide adequate power under a simple alternative hypothesis. These tests have yet to be compared to other spatial statistics. Results This research uses simulated point data generated under three alternative hypotheses to evaluate the properties of the permutation methods and compare them to the popular spatial scan statistic in a case-control setting. Case 1 was a single circular cluster centered in a circular study region. The spatial scan statistic had the highest power though the GAM method estimates did not fall far behind. Case 2 was a single point source located at the center of a circular cluster and Case 3 was a line source at the center of the horizontal axis of a square study region. Each had linearly decreasing logodds with distance from the point. The GAM methods outperformed the scan statistic in Cases 2 and 3. Comparing sensitivity, measured as the proportion of the exposure source correctly identified as high or low risk, the GAM methods outperformed the scan statistic in all three Cases. Conclusions The GAM permutation testing methods provide a regression-based alternative to the spatial scan statistic. Across all hypotheses examined in this research, the GAM methods had competing or greater power estimates and sensitivities exceeding that of the spatial scan statistic. PMID:20642827

Case Study Observational Research: A Framework for Conducting Case Study Research Where Observation Data Are the Focus.

PubMed

Morgan, Sonya J; Pullon, Susan R H; Macdonald, Lindsay M; McKinlay, Eileen M; Gray, Ben V

2017-06-01

Case study research is a comprehensive method that incorporates multiple sources of data to provide detailed accounts of complex research phenomena in real-life contexts. However, current models of case study research do not particularly distinguish the unique contribution observation data can make. Observation methods have the potential to reach beyond other methods that rely largely or solely on self-report. This article describes the distinctive characteristics of case study observational research, a modified form of Yin's 2014 model of case study research the authors used in a study exploring interprofessional collaboration in primary care. In this approach, observation data are positioned as the central component of the research design. Case study observational research offers a promising approach for researchers in a wide range of health care settings seeking more complete understandings of complex topics, where contextual influences are of primary concern. Future research is needed to refine and evaluate the approach.

Developing a new case based computer-aided detection scheme and an adaptive cueing method to improve performance in detecting mammographic lesions

PubMed Central

Tan, Maxine; Aghaei, Faranak; Wang, Yunzhi; Zheng, Bin

2017-01-01

The purpose of this study is to evaluate a new method to improve performance of computer-aided detection (CAD) schemes of screening mammograms with two approaches. In the first approach, we developed a new case based CAD scheme using a set of optimally selected global mammographic density, texture, spiculation, and structural similarity features computed from all four full-field digital mammography (FFDM) images of the craniocaudal (CC) and mediolateral oblique (MLO) views by using a modified fast and accurate sequential floating forward selection feature selection algorithm. Selected features were then applied to a “scoring fusion” artificial neural network (ANN) classification scheme to produce a final case based risk score. In the second approach, we combined the case based risk score with the conventional lesion based scores of a conventional lesion based CAD scheme using a new adaptive cueing method that is integrated with the case based risk scores. We evaluated our methods using a ten-fold cross-validation scheme on 924 cases (476 cancer and 448 recalled or negative), whereby each case had all four images from the CC and MLO views. The area under the receiver operating characteristic curve was AUC = 0.793±0.015 and the odds ratio monotonically increased from 1 to 37.21 as CAD-generated case based detection scores increased. Using the new adaptive cueing method, the region based and case based sensitivities of the conventional CAD scheme at a false positive rate of 0.71 per image increased by 2.4% and 0.8%, respectively. The study demonstrated that supplementary information can be derived by computing global mammographic density image features to improve CAD-cueing performance on the suspicious mammographic lesions. PMID:27997380

Screening of pollution control and clean-up materials for river chemical spills using the multiple case-based reasoning method with a difference-driven revision strategy.

PubMed

Liu, Rentao; Jiang, Jiping; Guo, Liang; Shi, Bin; Liu, Jie; Du, Zhaolin; Wang, Peng

2016-06-01

In-depth filtering of emergency disposal technology (EDT) and materials has been required in the process of environmental pollution emergency disposal. However, an urgent problem that must be solved is how to quickly and accurately select the most appropriate materials for treating a pollution event from the existing spill control and clean-up materials (SCCM). To meet this need, the following objectives were addressed in this study. First, the material base and a case base for environment pollution emergency disposal were established to build a foundation and provide material for SCCM screening. Second, the multiple case-based reasoning model method with a difference-driven revision strategy (DDRS-MCBR) was applied to improve the original dual case-based reasoning model method system, and screening and decision-making was performed for SCCM using this model. Third, an actual environmental pollution accident from 2012 was used as a case study to verify the material base, case base, and screening model. The results demonstrated that the DDRS-MCBR method was fast, efficient, and practical. The DDRS-MCBR method changes the passive situation in which the choice of SCCM screening depends only on the subjective experience of the decision maker and offers a new approach to screening SCCM.

Manufacturing methods of a composite cell case for a Ni-Cd battery

NASA Technical Reports Server (NTRS)

Bauer, J. L.

1979-01-01

Basic manufacturing method refinements for using graphite epoxy material for a nickel cadmium battery cell case were performed to demonstrate production feasibility. The various facets of production scale-up, i.e., process and tooling development, together with material and process control, were integrated into a comprehensive manufacturing process that assures production reproducibility and product uniformity. Test results substantiate that a battery cell case produced from graphite epoxy pre-impregnated material, utilizing the internal pressure bag fabrication method, is feasible.

Rapid detection of pandemic influenza in the presence of seasonal influenza

PubMed Central

2010-01-01

Background Key to the control of pandemic influenza are surveillance systems that raise alarms rapidly and sensitively. In addition, they must minimise false alarms during a normal influenza season. We develop a method that uses historical syndromic influenza data from the existing surveillance system 'SERVIS' (Scottish Enhanced Respiratory Virus Infection Surveillance) for influenza-like illness (ILI) in Scotland. Methods We develop an algorithm based on the weekly case ratio (WCR) of reported ILI cases to generate an alarm for pandemic influenza. From the seasonal influenza data from 13 Scottish health boards, we estimate the joint probability distribution of the country-level WCR and the number of health boards showing synchronous increases in reported influenza cases over the previous week. Pandemic cases are sampled with various case reporting rates from simulated pandemic influenza infections and overlaid with seasonal SERVIS data from 2001 to 2007. Using this combined time series we test our method for speed of detection, sensitivity and specificity. Also, the 2008-09 SERVIS ILI cases are used for testing detection performances of the three methods with a real pandemic data. Results We compare our method, based on our simulation study, to the moving-average Cumulative Sums (Mov-Avg Cusum) and ILI rate threshold methods and find it to be more sensitive and rapid. For 1% case reporting and detection specificity of 95%, our method is 100% sensitive and has median detection time (MDT) of 4 weeks while the Mov-Avg Cusum and ILI rate threshold methods are, respectively, 97% and 100% sensitive with MDT of 5 weeks. At 99% specificity, our method remains 100% sensitive with MDT of 5 weeks. Although the threshold method maintains its sensitivity of 100% with MDT of 5 weeks, sensitivity of Mov-Avg Cusum declines to 92% with increased MDT of 6 weeks. For a two-fold decrease in the case reporting rate (0.5%) and 99% specificity, the WCR and threshold methods, respectively, have MDT of 5 and 6 weeks with both having sensitivity close to 100% while the Mov-Avg Cusum method can only manage sensitivity of 77% with MDT of 6 weeks. However, the WCR and Mov-Avg Cusum methods outperform the ILI threshold method by 1 week in retrospective detection of the 2009 pandemic in Scotland. Conclusions While computationally and statistically simple to implement, the WCR algorithm is capable of raising alarms, rapidly and sensitively, for influenza pandemics against a background of seasonal influenza. Although the algorithm was developed using the SERVIS data, it has the capacity to be used at other geographic scales and for different disease systems where buying some early extra time is critical. PMID:21106071

Method of producing an integral resonator sensor and case

NASA Technical Reports Server (NTRS)

Challoner, A. Dorian (Inventor); Yee, Karl Y. (Inventor); Shcheglov, Kirill V. (Inventor); Hayworth, Ken J. (Inventor); Wiberg, Dean V. (Inventor)

2005-01-01

The present invention discloses an inertial sensor having an integral resonator. A typical sensor comprises a planar mechanical resonator for sensing motion of the inertial sensor and a case for housing the resonator. The resonator and a wall of the case are defined through an etching process. A typical method of producing the resonator includes etching a baseplate, bonding a wafer to the etched baseplate, through etching the wafer to form a planar mechanical resonator and the wall of the case and bonding an end cap wafer to the wall to complete the case.

[Clinical decision making: Fostering critical thinking in the nursing diagnostic process through case studies].

PubMed

Müller-Staub, Maria; Stuker-Studer, Ursula

2006-10-01

Case studies, based on actual patients' situations, provide a method of clinical decision making to foster critical thinking in nurses. This paper describes the method and process of group case studies applied in continuous education settings. This method bases on Balints' case supervision and was further developed and combined with the nursing diagnostic process. A case study contains different phases: Pre-phase, selection phase, case delineation and case work. The case provider narratively tells the situation of a patient. This allows the group to analyze and cluster signs and symptoms, to state nursing diagnoses and to derive nursing interventions. Results of the case study are validated by applying the theoretical background and critical appraisal of the case provider. Learning effects of the case studies were evaluated by means of qualitative questionnaires and analyzed according to Mayring. Findings revealed the following categories: a) Patients' problems are perceived in a patient centred way, accurate nursing diagnoses are stated and effective nursing interventions implemented. b) Professional nursing tasks are more purposefully perceived and named more precise. c) Professional nursing relationship, communication and respectful behaviour with patients were perceived in differentiated ways. The theoretical framework is described in the paper "Clinical decision making and critical thinking in the nursing diagnostic process". (Müller-Staub, 2006).

The Role of CMR and Others in Project Implementation using the CM Method to Support the Government

NASA Astrophysics Data System (ADS)

Tada, Hiroshi; Miyatake, Ichiro; Mouri, Junji; Endo, Kenji; Fueta, Toshiharu

In Japan, the construction management (CM) method has been introduced as a measure to support the governmental agencies, in developing and maintaining local infrastructures, or in executing public works projects in an appropriate manner, etc. The scope of work of the Construction Manager (CMR) of the CM method is specified as work items, in the special specification document for CM services contained in the contract documents, as a reflection of the client's expectations towards the performance of CMR. However, the CM services has been conducted as required on a case-by-case basis, because it is not possible to anticipate the actual construction status in advance, and thus the special specification document does not provide full detail of the scope of work of CMR. In such case, there may be a difference in the way the scope of work in the special specification document is recognized between the client and the CMR, which could make the CM method less effective. Moreover, there is a case in which the role sharing between the client and the CMR is not clearly defined, and both parties may engage in the same task in such case, causing an obstacle for smooth project implementation. For this reason, it is required to prepare the special specification document which clearly defines the scope of work of CMR, by examining the status of application of the CM method in actual project cases, and to improve the practices of the CM method as necessary. In view of this background, this study looks in to the actual project cases using the CM method, for the purpose of clarifying the actual scope of work of CMR for each task item defined in the special specification document, and the role sharing between the client and CMR, in the aim of contributing the promotion of the use and the effective application of the CM method.

37 CFR 2.207 - Methods of payment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Methods of payment. 2.207 Section 2.207 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Fees and Payment of Money in Trademark Cases § 2.207 Methods...

Case Mis-Conceptualization in Psychological Treatment: An Enduring Clinical Problem.

PubMed

Ridley, Charles R; Jeffrey, Christina E; Roberson, Richard B

2017-04-01

Case conceptualization, an integral component of mental health treatment, aims to facilitate therapeutic gains by formulating a clear picture of a client's psychological presentation. However, despite numerous attempts to improve this clinical activity, it remains unclear how well existing methods achieve their purported purpose. Case formulation is inconsistently defined in the literature and implemented in practice, with many methods varying in complexity, theoretical grounding, and empirical support. In addition, many of the methods demand a precise clinical acumen that is easily influenced by judgmental and inferential errors. These errors occur regardless of clinicians' level of training or amount of clinical experience. Overall, the lack of a consensus definition, a diversity of methods, and susceptibility of clinicians to errors are manifestations of the state of crisis in case conceptualization. This article, the 2nd in a series of 5 on thematic mapping, argues the need for more reliable and valid models of case conceptualization. © 2017 Wiley Periodicals, Inc.

A cost-benefit analysis of methods for the determination of biomass concentration in wastewater treatment.

PubMed

Hernandez, J E; Bachmann, R T; Edyvean, R G J

2006-01-01

The measurement of biomass concentration is important in biological wastewater treatment. This paper compares the accuracy and costs of the traditional volatile suspended solids (VSS) and the proposed suspended organic carbon (SOC) methods. VSS and SOC values of a dilution system were very well correlated (R(2)=0.9995). VSS and SOC of 16 samples were determined, the mean SOC/VSS ratio (0.52, n=16, sigma=0.01) was close to the theoretical value (0.53). For costing analysis, two hypothetical cases were analysed. In case A, it is assumed that 108 samples are analysed annually from two continuous reactors. Case B represents a batch experiment to be carried out in 24 incubated serum bottles. The savings, when using the SOC method, were 11,987 pounds for case A and 90 pounds for case B. This study suggests the use of SOC method as a time saving and lower cost biomass concentration measurement.

Case Writing as a Signature Pedagogy in Education Leadership

ERIC Educational Resources Information Center

Meyer, Heinz-Dieter; Shannon, Brenda

2010-01-01

Purpose: The purpose of this paper is to propose, as a candidate for a signature pedagogy, a method centered on case writing and peer review. Design/methodology/approach: In this method, aspiring education leaders use the writing of case studies--frequently featuring themselves as an actor in a narrative of organizational development or change--to…

Administering the Business School Case Method with a Goal-Based Scenario.

ERIC Educational Resources Information Center

Foster, David A.; Bareiss, Ray

This paper discusses some of the shortcomings of the business case method of undergraduate and graduate business education and examines the merits of a multimedia software system that is designed to teach topics and skills in financial accounting. It argues that the traditional case-based approach provides only limited assistance to students as…

Implementing Case Studies in a Plant Pathology Course: Impact on Student Learning and Engagement

ERIC Educational Resources Information Center

Yadav, Aman; Beckerman, Janna L.

2009-01-01

Case studies have been used in undergraduate science education as a way to develop students' critical thinking and problem-solving skills. However, little empirical evidence exists on whether this teaching method is having the desired impact on students in plant pathology courses. This study evaluated the influence of the case teaching method on…

Trends and Lessons Learned in Interdisciplinary and Non-Business Case Method Application.

ERIC Educational Resources Information Center

Anyansi-Archibong, Chi; Czuchry, Andrew J.; House, Claudia S.; Cicirello, Tony

2000-01-01

Presents results of a survey designed to test the level of development and application of cases in non-business courses such as sciences, mathematics, engineering, health, and technology. Findings support the growing popularity of the case method of teaching and learning outside the business domain. Suggests a framework for establishing win-win…

Student-Authored Case Studies as a Learning Tool in Physical Education Teacher Education

ERIC Educational Resources Information Center

Richards, K. Andrew; Hemphill, Michael A.; Templin, Thomas J.; Eubank, Andrew M.

2012-01-01

In order to prepare undergraduate students better for the realities of school life, instructors of some methods courses have started to use case studies for teaching. These cases are used to highlight the complexity and variability of the educational environment. This method of teaching, which has its roots in business, law, and medicine, has…

Teaching with the Case Study Method to Promote Active Learning in a Small Molecule Crystallography Course for Chemistry Students

ERIC Educational Resources Information Center

Campbell, Michael G.; Powers, Tamara M.; Zheng, Shao-Liang

2016-01-01

Implementing the case study method in a practical X-ray crystallography course designed for graduate or upper-level undergraduate chemistry students is described. Compared with a traditional lecture format, assigning small groups of students to examine literature case studies encourages more active engagement with the course material and…

Introduction to Case Method Teaching. A Guide to the Galaxy.

ERIC Educational Resources Information Center

Wassermann, Selma

While case method teaching has long been associated with business and medical schools, in the past few years there has been increased interest in teaching with cases in secondary schools, colleges, and professional schools. This book, for teachers at all levels and in all subjects, examines this pedagogy and serves as a guide for pre- and…

The Improving Way of Logistics Management in Korean Army

DTIC Science & Technology

2011-03-01

case study , ethnography , phenomenological study , ground theory study and content 18 analysis. The case study deals with a...there are five kinds of qualitative research approaches. To decide which method to be chosen, one should consider the purpose, focus, method of data... qualitative research , case study is good to find the answer when the researcher has no

Using Student-Centered Cases in the Classroom: An Action Inquiry Approach to Leadership Development

ERIC Educational Resources Information Center

Foster, Pacey; Carboni, Inga

2009-01-01

This article addresses the concern that business schools are not adequately developing the practical leadership skills that are required in the real world of management. The article begins by discussing the limitations of traditional case methods for teaching behavioral skills. This approach is contrasted with an alternative case method drawn from…

Case Study: Testing with Case Studies

ERIC Educational Resources Information Center

Herreid, Clyde Freeman

2015-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses using case studies to test for knowledge or lessons learned.

An effective framework for finding similar cases of dengue from audio and text data using domain thesaurus and case base reasoning

NASA Astrophysics Data System (ADS)

Sandhu, Rajinder; Kaur, Jaspreet; Thapar, Vivek

2018-02-01

Dengue, also known as break-bone fever, is a tropical disease transmitted by mosquitoes. If the similarity between dengue infected users can be identified, it can help government's health agencies to manage the outbreak more effectively. To find similarity between cases affected by Dengue, user's personal and health information are the two fundamental requirements. Identification of similar symptoms, causes, effects, predictions and treatment procedures, is important. In this paper, an effective framework is proposed which finds similar patients suffering from dengue using keyword aware domain thesaurus and case base reasoning method. This paper focuses on the use of ontology dependent domain thesaurus technique to extract relevant keywords and then build cases with the help of case base reasoning method. Similar cases can be shared with users, nearby hospitals and health organizations to manage the problem more adequately. Two million case bases were generated to test the proposed similarity method. Experimental evaluations of proposed framework resulted in high accuracy and low error rate for finding similar cases of dengue as compared to UPCC and IPCC algorithms. The framework developed in this paper is for dengue but can easily be extended to other domains also.

[Infection of chronic otitis media with Acinetobacter：6 cases report].

PubMed

Zhang, K; Qu, P; Jia, N; Fu, T

2016-12-01

Objective: To investigate the clinical characteristics, diagnostic methods and prognosis of patients with chronic otitis media with Acinetobacter infection. Method: Retrospective analysis of clinical data of 6 cases of chronic otitis media complicated with Acinetobacter infection. Including history, clinical manifestations, laboratory examination, audiology, inner ear, CT, MRI imaging characteristics, treatment and prognosis of etc. to summarize the clinical characteristics, diagnosis and treatment of chronic otitis media with Acinetobacter infection. Result: The age was between 17 years old and 61 years old (Median age 30 years) .Two of them was male and 4 were female. Four cases were had underlying diseases. Five cases with main symptom of cholesteatoma, 1 case with earache symptoms, and 1 case with facial paralysis symptoms. Four cases had vary degrees of physical decline and destruction of bone. After surgery treatment, five patients improved ear pus, among 3 cases was cured, 2 cases of recurrence. Conclusion: Chronic otitis media with Acinetobacter infection occurs in the patient with elderly, poor physical constitution. However, the recurrence rate of conventional treatment is higher. The disease has high misdiagnosis rate. Operation combined with sensitive antibiotic therapy is a radical cure method. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.

Determination of the intersegmental plane using the slip-knot method

PubMed Central

Endoh, Makoto; Kato, Hirohisa; Suzuki, Jun; Watarai, Hikaru; Hamada, Akira; Suzuki, Katsuyuki; Nakahashi, Kenta; Sadahiro, Mitsuaki

2018-01-01

Background Visualization of intersegmental planes in the lung is desirable for precise anatomical lung segmentectomy. We developed the slip-knot method for creating inflation-deflation lines. This study aimed to assess relevant data for thoracoscopic segmentectomy performed using this method. Methods In the slip-knot method, the objective segmental bronchus is looped with a monofilament thread. One end of the thread is then pulled during temporary bilateral ventilation, causing the knot to slip toward the bronchus. Thereafter, bronchial ligation is tightened to block the outflow of segmental air, ensuring that the segment remains expanded while the other reserved segments collapse on resumption of unilateral ventilation. Data from 221 patients who underwent thoracoscopic pulmonary segmentectomy between 2010 and 2016 were analyzed. Results A total of 147 patients (67%) were indicated for the slip-knot method, and 74 cases (33%) were non-adaptive cases. Ninety six percent of 147 cases were well adapted to the slip-knot method, which allowed us to obtain good inflation-deflation line images to determine the intersegmental plane. The mean operative time was 171±51 min (range, 71–367 min). The mean duration of chest tube insertion was 1.5±1.2 days (range, 1–7 days). Three cases (2.0%) had prolonged air-leakage and one (0.7%) case had readmission for late air-leakage. Conclusions Our method enables determination of anatomical intersegmental planes using only one monofilament thread, thus facilitating thoracoscopic pulmonary anatomical segmentectomy. PMID:29785297

Similarity based false-positive reduction for breast cancer using radiographic and pathologic imaging features

NASA Astrophysics Data System (ADS)

Pai, Akshay; Samala, Ravi K.; Zhang, Jianying; Qian, Wei

2010-03-01

Mammography reading by radiologists and breast tissue image interpretation by pathologists often leads to high False Positive (FP) Rates. Similarly, current Computer Aided Diagnosis (CADx) methods tend to concentrate more on sensitivity, thus increasing the FP rates. A novel method is introduced here which employs similarity based method to decrease the FP rate in the diagnosis of microcalcifications. This method employs the Principal Component Analysis (PCA) and the similarity metrics in order to achieve the proposed goal. The training and testing set is divided into generalized (Normal and Abnormal) and more specific (Abnormal, Normal, Benign) classes. The performance of this method as a standalone classification system is evaluated in both the cases (general and specific). In another approach the probability of each case belonging to a particular class is calculated. If the probabilities are too close to classify, the augmented CADx system can be instructed to have a detailed analysis of such cases. In case of normal cases with high probability, no further processing is necessary, thus reducing the computation time. Hence, this novel method can be employed in cascade with CADx to reduce the FP rate and also avoid unnecessary computational time. Using this methodology, a false positive rate of 8% and 11% is achieved for mammography and cellular images respectively.

The Verbotonal Method of Aural Rehabilitation: A Case Study

ERIC Educational Resources Information Center

Eisenberg, Diane; Santore, Frances

1976-01-01

A case study is presented of a 12-year-old child with a congenital profound bilateral sensori-neural hearing loss, who received rehabilitative audio-therapy according to the verbotonal method. (Author/LS)

Applying CBR to machine tool product configuration design oriented to customer requirements

NASA Astrophysics Data System (ADS)

Wang, Pengjia; Gong, Yadong; Xie, Hualong; Liu, Yongxian; Nee, Andrew Yehching

2017-01-01

Product customization is a trend in the current market-oriented manufacturing environment. However, deduction from customer requirements to design results and evaluation of design alternatives are still heavily reliant on the designer's experience and knowledge. To solve the problem of fuzziness and uncertainty of customer requirements in product configuration, an analysis method based on the grey rough model is presented. The customer requirements can be converted into technical characteristics effectively. In addition, an optimization decision model for product planning is established to help the enterprises select the key technical characteristics under the constraints of cost and time to serve the customer to maximal satisfaction. A new case retrieval approach that combines the self-organizing map and fuzzy similarity priority ratio method is proposed in case-based design. The self-organizing map can reduce the retrieval range and increase the retrieval efficiency, and the fuzzy similarity priority ratio method can evaluate the similarity of cases comprehensively. To ensure that the final case has the best overall performance, an evaluation method of similar cases based on grey correlation analysis is proposed to evaluate similar cases to select the most suitable case. Furthermore, a computer-aided system is developed using MATLAB GUI to assist the product configuration design. The actual example and result on an ETC series machine tool product show that the proposed method is effective, rapid and accurate in the process of product configuration. The proposed methodology provides a detailed instruction for the product configuration design oriented to customer requirements.

Evidence Arguments for Using Formal Methods in Software Certification

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganesh

2013-01-01

We describe a generic approach for automatically integrating the output generated from a formal method/tool into a software safety assurance case, as an evidence argument, by (a) encoding the underlying reasoning as a safety case pattern, and (b) instantiating it using the data produced from the method/tool. We believe this approach not only improves the trustworthiness of the evidence generated from a formal method/tool, by explicitly presenting the reasoning and mechanisms underlying its genesis, but also provides a way to gauge the suitability of the evidence in the context of the wider assurance case. We illustrate our work by application to a real example-an unmanned aircraft system- where we invoke a formal code analysis tool from its autopilot software safety case, automatically transform the verification output into an evidence argument, and then integrate it into the former.

Numerical simulation on dimension decrease for annular casing of one centrifugal boiler circulation pump

NASA Astrophysics Data System (ADS)

Fan, Y. Z.; Zuo, Z. G.; Liu, S. H.; Wu, Y. L.; Sha, Y. J.

2012-11-01

Primary formulation derivation indicates that the dimension of one existing centrifugal boiler circulation pump casing is too large. As great manufacture cost can be saved by dimension decrease, a numerical simulation research is developed in this paper on dimension decrease for annular casing of this pump with a specific speed equaling to 189, which aims at finding an appropriately smaller dimension of the casing while hydraulic performance and strength performance will hardly be changed according to the requirements of the cooperative company. The research object is one existing centrifugal pump with a diffuser and a semi-spherical annular casing, working as the boiler circulation pump for (ultra) supercritical units in power plants. Dimension decrease, the modification method, is achieved by decreasing the existing casing's internal radius (marked as "Ri0") while keeping the wall thickness. The research analysis is based on primary formulation derivation, CFD (Computational Fluid Dynamics) simulation and FEM (Finite Element Method) simulation. Primary formulation derivation estimates that a design casing's internal radius should be less than 0.75 Ri0. CFD analysis indicates that smaller casing with 0.75 Ri0 has a worse hydraulic performance when working at large flow rates and a better hydraulic performance when working at small flow rates. In consideration of hydraulic performance and dimension decrease, an appropriate casing's internal radius is determined, which equals to 0.875 Ri0. FEM analysis then confirms that modified pump casing has nearly the same strength performance as the existing pump casing. It is concluded that dimension decrease can be an economical method as well as a practical method for large pumps in engineering fields.

Intelligent design of permanent magnet synchronous motor based on CBR

NASA Astrophysics Data System (ADS)

Li, Cong; Fan, Beibei

2018-05-01

Aiming at many problems in the design process of Permanent magnet synchronous motor (PMSM), such as the complexity of design process, the over reliance on designers' experience and the lack of accumulation and inheritance of design knowledge, a design method of PMSM Based on CBR is proposed in order to solve those problems. In this paper, case-based reasoning (CBR) methods of cases similarity calculation is proposed for reasoning suitable initial scheme. This method could help designers, by referencing previous design cases, to make a conceptual PMSM solution quickly. The case retain process gives the system self-enrich function which will improve the design ability of the system with the continuous use of the system.

System and method for assaying radiation

DOEpatents

DiPrete, David P; Whiteside, Tad; Pak, Donald J; DiPrete, Cecilia C

2013-11-12

A system for assaying radiation includes a sample holder configured to hold a liquid scintillation solution. A photomultiplier receives light from the liquid scintillation solution and generates a signal reflective of the light. A control circuit biases the photomultiplier and receives the signal from the photomultiplier reflective of the light. A light impermeable casing surrounds the sample holder, photomultiplier, and control circuit. A method for assaying radiation includes placing a sample in a liquid scintillation solution, placing the liquid scintillation solution in a sample holder, and placing the sample holder inside a light impermeable casing. The method further includes positioning a photomultiplier inside the light impermeable casing and supplying power to a control circuit inside the light impermeable casing.

Promoting Creativity in International Business Education: A Protocol for Student-Constructed Cases

ERIC Educational Resources Information Center

Riordan, Diane A.; Sullivan, M. Cathy; Fink, Danny

2003-01-01

Case studies, including "archival cases," "documentary cases," "living cases," and "learner-generated cases," are popular teaching methods in the international business curriculum. In this paper we present a protocol for student-constructed cases, an extension of the learner-generated case, and provide an example using foreign currency exchange…

Qualitative case study methodology in nursing research: an integrative review.

PubMed

Anthony, Susan; Jack, Susan

2009-06-01

This paper is a report of an integrative review conducted to critically analyse the contemporary use of qualitative case study methodology in nursing research. Increasing complexity in health care and increasing use of case study in nursing research support the need for current examination of this methodology. In 2007, a search for case study research (published 2005-2007) indexed in the CINAHL, MEDLINE, EMBASE, PsychINFO, Sociological Abstracts and SCOPUS databases was conducted. A sample of 42 case study research papers met the inclusion criteria. Whittemore and Knafl's integrative review method guided the analysis. Confusion exists about the name, nature and use of case study. This methodology, including terminology and concepts, is often invisible in qualitative study titles and abstracts. Case study is an exclusive methodology and an adjunct to exploring particular aspects of phenomena under investigation in larger or mixed-methods studies. A high quality of case study exists in nursing research. Judicious selection and diligent application of literature review methods promote the development of nursing science. Case study is becoming entrenched in the nursing research lexicon as a well-accepted methodology for studying phenomena in health and social care, and its growing use warrants continued appraisal to promote nursing knowledge development. Attention to all case study elements, process and publication is important in promoting authenticity, methodological quality and visibility.

A Comparison of Computational Aeroacoustic Prediction Methods for Transonic Rotor Noise

NASA Technical Reports Server (NTRS)

Brentner, Kenneth S.; Lyrintzis, Anastasios; Koutsavdis, Evangelos K.

1996-01-01

This paper compares two methods for predicting transonic rotor noise for helicopters in hover and forward flight. Both methods rely on a computational fluid dynamics (CFD) solution as input to predict the acoustic near and far fields. For this work, the same full-potential rotor code has been used to compute the CFD solution for both acoustic methods. The first method employs the acoustic analogy as embodied in the Ffowcs Williams-Hawkings (FW-H) equation, including the quadrupole term. The second method uses a rotating Kirchhoff formulation. Computed results from both methods are compared with one other and with experimental data for both hover and advancing rotor cases. The results are quite good for all cases tested. The sensitivity of both methods to CFD grid resolution and to the choice of the integration surface/volume is investigated. The computational requirements of both methods are comparable; in both cases these requirements are much less than the requirements for the CFD solution.

Recommendations for Using the Case Study Method in International Business Research

ERIC Educational Resources Information Center

Vissak, Tiia

2010-01-01

The case study method has not been as frequently used in international business (IB) research as quantitative methods. Moreover, it has been sometimes misused and quite often criticized. Still, it can be very useful for understanding such complex phenomena as the internationalization process or the management of multinational enterprises. Based on…

Sustaining Inquiry-Based Teaching Methods in the Middle School Science Classroom

ERIC Educational Resources Information Center

Murphy, Amy Fowler

2012-01-01

This dissertation used a combination of case study and phenomenological research methods to investigate how individual teachers of middle school science in the Alabama Math, Science, and Technology Initiative (AMSTI) program sustain their use of inquiry-based methods of teaching and learning. While the overall context for the cases was the AMSTI…

Selection of Thermal Worst-Case Orbits via Modified Efficient Global Optimization

NASA Technical Reports Server (NTRS)

Moeller, Timothy M.; Wilhite, Alan W.; Liles, Kaitlin A.

2014-01-01

Efficient Global Optimization (EGO) was used to select orbits with worst-case hot and cold thermal environments for the Stratospheric Aerosol and Gas Experiment (SAGE) III. The SAGE III system thermal model changed substantially since the previous selection of worst-case orbits (which did not use the EGO method), so the selections were revised to ensure the worst cases are being captured. The EGO method consists of first conducting an initial set of parametric runs, generated with a space-filling Design of Experiments (DoE) method, then fitting a surrogate model to the data and searching for points of maximum Expected Improvement (EI) to conduct additional runs. The general EGO method was modified by using a multi-start optimizer to identify multiple new test points at each iteration. This modification facilitates parallel computing and decreases the burden of user interaction when the optimizer code is not integrated with the model. Thermal worst-case orbits for SAGE III were successfully identified and shown by direct comparison to be more severe than those identified in the previous selection. The EGO method is a useful tool for this application and can result in computational savings if the initial Design of Experiments (DoE) is selected appropriately.

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

Completed Suicide with Violent and Non-Violent Methods in Rural Shandong, China: A Psychological Autopsy Study

PubMed Central

Sun, Shi-Hua; Jia, Cun-Xian

2014-01-01

Background This study aims to describe the specific characteristics of completed suicides by violent methods and non-violent methods in rural Chinese population, and to explore the related factors for corresponding methods. Methods Data of this study came from investigation of 199 completed suicide cases and their paired controls of rural areas in three different counties in Shandong, China, by interviewing one informant of each subject using the method of Psychological Autopsy (PA). Results There were 78 (39.2%) suicides with violent methods and 121 (60.8%) suicides with non-violent methods. Ingesting pesticides, as a non-violent method, appeared to be the most common suicide method (103, 51.8%). Hanging (73 cases, 36.7%) and drowning (5 cases, 2.5%) were the only violent methods observed. Storage of pesticides at home and higher suicide intent score were significantly associated with choice of violent methods while committing suicide. Risk factors related to suicide death included negative life events and hopelessness. Conclusions Suicide with violent methods has different factors from suicide with non-violent methods. Suicide methods should be considered in suicide prevention and intervention strategies. PMID:25111835

Transportation planning, climate change, and decision making under uncertainty

DOT National Transportation Integrated Search

2008-01-01

Case studies are presented that illustrate the application of methods which incorporate : decisionmaking under uncertainty. The applications of these methods that are summarized in : this paper deal with cases outside of transportation, including mil...

Using Case Study Multi-Methods to Investigate Close(r) Collaboration: Course-Based Tutoring and the Directive/Nondirective Instructional Continuum

ERIC Educational Resources Information Center

Corbett, Steven J.

2011-01-01

This essay presents case studies of "course-based tutoring" (CBT) and one-to-one tutorials in two sections of developmental first-year composition (FYC) at a large West Coast research university. The author's study uses a combination of rhetorical and discourse analyses and ethnographic and case study multi-methods to investigate both…

Introduction and Evaluation of Case-Based Learning in the First Foundational Course of an Undergraduate Medical Curriculum

ERIC Educational Resources Information Center

Fortun, Jenny; Morales, Ana Cecilia; Tempest, Helen Ghislaine

2017-01-01

Case-based learning (CBL) has been proposed as an effective method to promote student knowledge and motivation. The timing and methods for implementation have varied among schools, and data regarding the effectiveness of this pedagogy compared to other learning modalities are inconclusive. We introduced five different cases in the first course of…

The Analysis and Discussion in the Effective Application of the Dispatcher Training Based on Case Teaching Method with the Cause from the Action of the Gap Protection of Main Transformer

NASA Astrophysics Data System (ADS)

Yuanyuan, Xu; Zhengmao, Zhang; Xiang, Fang; Yuanshuai, Xu; Xinxin, Song

2018-03-01

The combination of theory and practice is a difficult problem on dispatcher training. Through a typical example of case, this paper provides an effective case teaching method for dispatcher training, and combines the theoretical discussion of the rule of experience with cases and achieves vividness. It helps students to understand and catch the key points of the theory, and improve their practical skills.

Manufacturing methods of a composite cell case for a Ni-Cd battery

NASA Technical Reports Server (NTRS)

Bauer, J. L.; Bogner, R. S.; Lowe, E. P.; Orlowski, E.

1979-01-01

Graphite epoxy material for a nickel cadmium battery cell case has been evaluated and determined to perform in the simulated environment of the battery. The basic manufacturing method requires refinement to demonstrate production feasibility. The various facets of production scale-up, i.e., process and tooling development together with material and process control, have been integrated into a comprehensive manufacturing process that assures production reproducibility and product uniformity. Test results substantiate that a battery cell case produced from graphite epoxy pre-impregnated material utilizing internal pressure bag fabrication method is feasible.

The wavefield of acoustic logging in a cased hole with a single casing—Part II: a dipole tool

NASA Astrophysics Data System (ADS)

Wang, Hua; Fehler, Michael

2018-02-01

The acoustic method, being the most effective method for cement bond evaluation, has been used by industry for more than a half century. However, the methods currently used are almost always focused on the first arrival (especially for sonic logging), which has limitations. We use a 3-D finite-difference method to numerically simulate the wavefields from a dipole source in a single-cased hole with different cement conditions. By using wavefield snapshots and dispersion curves, we interpret the characteristics of the modes in the models. We investigate the effect of source frequency, the thickness and location of fluid columns on different modes. The dipole wavefield in a single-cased hole consists of a leaky P (for frequency >10 kHz) from formation, formation flexural, and also some casing modes. Depending on the mode, their behaviour is sometimes sensitive to the existence of fluid between the cement and formation and sometimes sensitive to the existence of fluid between the casing and cement. The formation S velocity can be obtained from the formation flexural mode at low frequency. However, interference from high-order casing modes makes the leaky P invisible and P velocity determination difficult when the casing is not well cemented. The dispersion curve of the formation flexural mode is sensitive to the fluid thickness when fluid exists only at the interface between casing and cement. The fundamental casing dipole mode is only sensitive to the total fluid thickness in the annulus between casing and formation. Either the arrival time or amplitude of the high-order casing dipole mode is sensitive to the fluid column when the fluid column is next to the casing. We provide a table that summarizes the ability of different modes to detect fluid columns between various layers of casing, cement and formation. Based on the results, we suggest a data processing flow for field application, which will highly improve cement evaluation.

Promoting student case creation to enhance instruction of clinical reasoning skills: a pilot feasibility study

PubMed Central

Chandrasekar, Hamsika; Gesundheit, Neil; Nevins, Andrew B; Pompei, Peter; Bruce, Janine; Merrell, Sylvia Bereknyei

2018-01-01

Background It is a common educational practice for medical students to engage in case-based learning (CBL) exercises by working through clinical cases that have been developed by faculty. While such faculty-developed exercises have educational strengths, there are at least two major drawbacks to learning by this method: the number and diversity of cases is often limited; and students decrease their engagement with CBL cases as they grow accustomed to the teaching method. We sought to explore whether student case creation can address both of these limitations. We also compared student case creation to traditional clinical reasoning sessions in regard to tutorial group effectiveness, perceived gains in clinical reasoning, and quality of student–faculty interaction. Methods Ten first-year medical students participated in a feasibility study wherein they worked in small groups to develop their own patient case around a preassigned diagnosis. Faculty provided feedback on case quality afterwards. Students completed pre- and post-self-assessment surveys. Students and faculty also participated in separate focus groups to compare their case creation experience to traditional CBL sessions. Results Students reported high levels of team engagement and peer learning, as well as increased ownership over case content and understanding of clinical reasoning nuances. However, students also reported decreases in student–faculty interaction and the use of visual aids (P < 0.05). Conclusion The results of our feasibility study suggest that student-generated cases can be a valuable adjunct to traditional clinical reasoning instruction by increasing content ownership, encouraging student-directed learning, and providing opportunities to explore clinical nuances. However, these gains may reduce student–faculty interaction. Future studies may be able to identify an improved model of faculty participation, the ideal timing for incorporation of this method in a medical curriculum, and a more rigorous assessment of the impact of student case creation on the development of clinical reasoning skills. PMID:29692641

Model Reduction via Principe Component Analysis and Markov Chain Monte Carlo (MCMC) Methods

NASA Astrophysics Data System (ADS)

Gong, R.; Chen, J.; Hoversten, M. G.; Luo, J.

2011-12-01

Geophysical and hydrogeological inverse problems often include a large number of unknown parameters, ranging from hundreds to millions, depending on parameterization and problems undertaking. This makes inverse estimation and uncertainty quantification very challenging, especially for those problems in two- or three-dimensional spatial domains. Model reduction technique has the potential of mitigating the curse of dimensionality by reducing total numbers of unknowns while describing the complex subsurface systems adequately. In this study, we explore the use of principal component analysis (PCA) and Markov chain Monte Carlo (MCMC) sampling methods for model reduction through the use of synthetic datasets. We compare the performances of three different but closely related model reduction approaches: (1) PCA methods with geometric sampling (referred to as 'Method 1'), (2) PCA methods with MCMC sampling (referred to as 'Method 2'), and (3) PCA methods with MCMC sampling and inclusion of random effects (referred to as 'Method 3'). We consider a simple convolution model with five unknown parameters as our goal is to understand and visualize the advantages and disadvantages of each method by comparing their inversion results with the corresponding analytical solutions. We generated synthetic data with noise added and invert them under two different situations: (1) the noised data and the covariance matrix for PCA analysis are consistent (referred to as the unbiased case), and (2) the noise data and the covariance matrix are inconsistent (referred to as biased case). In the unbiased case, comparison between the analytical solutions and the inversion results show that all three methods provide good estimates of the true values and Method 1 is computationally more efficient. In terms of uncertainty quantification, Method 1 performs poorly because of relatively small number of samples obtained, Method 2 performs best, and Method 3 overestimates uncertainty due to inclusion of random effects. However, in the biased case, only Method 3 correctly estimates all the unknown parameters, and both Methods 1 and 2 provide wrong values for the biased parameters. The synthetic case study demonstrates that if the covariance matrix for PCA analysis is inconsistent with true models, the PCA methods with geometric or MCMC sampling will provide incorrect estimates.

Comparison of microstickies measurement methods. Part II, Results and discussion

Treesearch

Mahendra R. Doshi; Angeles Blanco; Carlos Negro; Concepcion Monte; Gilles M. Dorris; Carlos C. Castro; Axel Hamann; R. Daniel Haynes; Carl Houtman; Karen Scallon; Hans-Joachim Putz; Hans Johansson; R. A. Venditti; K. Copeland; H.-M. Chang

2003-01-01

In part I of the article we discussed sample preparation procedure and described various methods used for the measurement of microstickies. Some of the important features of different methods are highlighted in Table 1. Temperatures used in the measurement methods vary from room temperature in some cases, 45 °C to 65 °C in other cases. Sample size ranges from as low as...

Pistol-grip Syringe holder (Cameco syringe pistol) in fine needle aspiration Biopsy: any advantages over the use of direct finger grip?

PubMed

Mayun, A A; Nggada, H A; Abdulazzez, J O; Musa, A B; Pindiga, U H; Khalil, M I

2013-06-01

The study seeks to determine the advantages of using the pistol-grip syringe holder in the performance of FNAB over the use of direct finger grip method. The skin is cleaned with gauze soaked in methylated spirit and the lump is located and firmly held between the thumb and fore finger of the free hand. The syringe is held by the out side of the barrel or by pistol-grip, and the needle tip pushed into the lesion. The plunger is partially retracted, creating a negative pressure. The cutting edge of the needle tip frees the cells inside the lesion which are sucked into the fine bore of the needle. The contents of the needle are then emptied on a microscopic slide and thinly smeared. The slides are then fixed in alcohol and later stained. These were examined under the microscope and a comparison between the aspirations using pistol-grip and direct finger grip was made. A total of 266 cases of FNABs were carried out from 1st January to 31st December, 2008. There were 89 breast cases out of which 42 (47%) had pistol-grip method and 47 (53%) had direct finger grip method; 74 thyroid cases out of which 28 (38%) were pistol-grip and 46 (62%) were direct finger grip cases; 56 cases of lymph node FNABs of which 18(32%) and 38 (68%) had pistol-grip and direct finger grip methods respectively. There were 23 cases of salivary gland FNABs having 8 (35%) and 15 (65%) as pistol-grip and direct finger grip methods respectively. Marked cellularity was observed in the majority of cases using both methods of FNABs. This study has shown that the use of pistol-grip syringe holder in the performance of FNABs has no significant advantage compared to the direct finger grip method.

Applications of a direct/iterative design method to complex transonic configurations

NASA Technical Reports Server (NTRS)

Smith, Leigh Ann; Campbell, Richard L.

1992-01-01

The current study explores the use of an automated direct/iterative design method for the reduction of drag in transport configurations, including configurations with engine nacelles. The method requires the user to choose a proper target-pressure distribution and then develops a corresponding airfoil section. The method can be applied to two-dimensional airfoil sections or to three-dimensional wings. The three cases that are presented show successful application of the method for reducing drag from various sources. The first two cases demonstrate the use of the method to reduce induced drag by designing to an elliptic span-load distribution and to reduce wave drag by decreasing the shock strength for a given lift. In the second case, a body-mounted nacelle is added and the method is successfully used to eliminate increases in wing drag associated with the nacelle addition by designing to an arbitrary pressure distribution as a result of the redesigning of a wing in combination with a given underwing nacelle to clean-wing, target-pressure distributions. These cases illustrate several possible uses of the method for reducing different types of drag. The magnitude of the obtainable drag reduction varies with the constraints of the problem and the configuration to be modified.

Herbalife hepatotoxicity: Evaluation of cases with positive reexposure tests

PubMed Central

Teschke, Rolf; Frenzel, Christian; Schulze, Johannes; Schwarzenboeck, Alexander; Eickhoff, Axel

2013-01-01

AIM: To analyze the validity of applied test criteria and causality assessment methods in assumed Herbalife hepatotoxicity with positive reexposure tests. METHODS: We searched the Medline database for suspected cases of Herbalife hepatotoxicity and retrieved 53 cases including eight cases with a positive unintentional reexposure and a high causality level for Herbalife. First, analysis of these eight cases focused on the data quality of the positive reexposure cases, requiring a baseline value of alanine aminotransferase (ALT) < 5 upper limit of normal (N) before reexposure, with N as the upper limit of normal, and a doubling of the ALT value at reexposure as compared to the ALT value at baseline prior to reexposure. Second, reported methods to assess causality in the eight cases were evaluated, and then the liver specific Council for International Organizations of Medical Sciences (CIOMS) scale validated for hepatotoxicity cases was used for quantitative causality reevaluation. This scale consists of various specific elements with scores provided through the respective case data, and the sum of the scores yields a causality grading for each individual case of initially suspected hepatotoxicity. RESULTS: Details of positive reexposure test conditions and their individual results were scattered in virtually all cases, since reexposures were unintentional and allowed only retrospective rather than prospective assessments. In 1/8 cases, criteria for a positive reexposure were fulfilled, whereas in the remaining cases the reexposure test was classified as negative (n = 1), or the data were considered as uninterpretable due to missing information to comply adequately with the criteria (n = 6). In virtually all assessed cases, liver unspecific causality assessment methods were applied rather than a liver specific method such as the CIOMS scale. Using this scale, causality gradings for Herbalife in these eight cases were probable (n = 1), unlikely (n = 4), and excluded (n = 3). Confounding variables included low data quality, alternative diagnoses, poor exclusion of important other causes, and comedication by drugs and herbs in 6/8 cases. More specifically, problems were evident in some cases regarding temporal association, daily doses, exact start and end dates of product use, actual data of laboratory parameters such as ALT, and exact dechallenge characteristics. Shortcomings included scattered exclusion of hepatitis A-C, cytomegalovirus and Epstein Barr virus infection with only globally presented or lacking parameters. Hepatitis E virus infection was considered in one single patient and found positive, infections by herpes simplex virus and varicella zoster virus were excluded in none. CONCLUSION: Only one case fulfilled positive reexposure test criteria in initially assumed Herbalife hepatotoxicity, with lower CIOMS based causality gradings for the other cases than hitherto proposed. PMID:23898368

Understanding the role of individual consumer-provider relationships within assertive community treatment.

PubMed

Stanhope, Victoria; Matejkowski, Jason

2010-08-01

The widespread adoption of assertive community treatment has resulted in a shift from an individual model to a team model of case management. The shift has had implications for individual relationships between case managers and consumers, but still little is known about how these relationships develop in teams. This exploratory mixed methods study looked at how case managers and consumers negotiate individual relationships within a team model. Quantitative methods identified high and low service intensity relationships between consumers and case managers and qualitative methods explored and compared these relationships. Consumers in high service intensity relationships described a preference for certain case managers and the burden of working with multiple people. Case managers invested high service intensity relationships with special therapeutic value, articulated the challenges of coordinating care across the team, and utilized team limit setting techniques. In contrast, low service intensity relationships were more likely to reflect integration with the entire team. Findings suggest that teams need to consider how individual relationships enhance care for their consumers and how to nurture these relationships while maintaining the support necessary for case managers and consumers.

Methods and apparatus for measurement of the resistivity of geological formations from within cased wells in presence of acoustic and magnetic energy sources

DOEpatents

Vail, W.B. III.

1991-08-27

Methods and apparatus are provided for measuring the acoustically modulated electronic properties of geological formations and cement layers adjacent to cased boreholes. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. Voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of the leakage current conducted into formation in the vicinity of those electrodes. Simultaneously subjecting the casing and formation to an acoustic source acoustically modulates the leakage current measured thereby providing a measure of the acoustically modulated electronic properties of the adjacent formation. Similarly, methods and apparatus are also described which measure the leakage current into formation while simultaneously subjecting the casing to an applied magnetic field which therefore allows measurement of the magnetically modulated electronic properties of the casing and the adjacent formation. 9 figures.

Methods and apparatus for measurement of the resistivity of geological formations from within cased wells in presence of acoustic and magnetic energy sources

DOEpatents

Vail, III, William B.

1991-01-01

Methods and apparatus are provided for measuring the acoustically modulated electronic properties of geological formations and cement layers adjacent to cased boreholes. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. Voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of the leakage current conducted into formation in the vicinity of those electrodes. Simultaneously subjecting the casing and formation to an acoustic source acoustically modulates the leakage current measured thereby providing a measure of the acoustically modulated electronic properties of the adjacent formation. Similarly, methods and apparatus are also described which measure the leakage current into formation while simultaneously subjecting the casing to an applied magnetic field which therefore allows measurement of the magnetically modulated electronic properties of the casing and the adjacent formation.

Case-based Long-term Professional Development of Science Teachers

NASA Astrophysics Data System (ADS)

Dori, Yehudit J.; Herscovitz, Orit

2005-10-01

Reform efforts are often unsuccessful because they failed to understand that teachers play a key role in making educational reforms successful. This paper describes a long-term teacher professional development (PD) program aimed at educating and training teachers to teach interdisciplinary topics using case-based method in science. The research objective was to identify, follow and document the processes that science teachers went through as they assimilated the interdisciplinary, case-based science teaching approach. The research accompanied the PD program throughout its 3-year period. About 50 teachers, who took part in the PD program, were exposed to an interdisciplinary case-based teaching method. The research instruments included teacher portfolios, which contained projects and reflection questionnaires, classroom observations, teacher interviews, and student feedback questionnaires. The portfolios contained the projects that the teachers had carried out during the PD program, which included case studies and accompanying student activities. We found that the teachers gradually moved from exposure to new teaching methods and subject matter, through active learning and preparing case-based team projects, to interdisciplinary, active classroom teaching using the case studies they developed.

Case Study Teaching

ERIC Educational Resources Information Center

Herreid, Clyde Freeman

2011-01-01

This chapter describes the history of case study teaching, types of cases, and experimental data supporting their effectiveness. It also describes a model for comparing the efficacy of the various case study methods. (Contains 1 figure.)

76 FR 28215 - Notice of Intent To Grant Exclusive Patent License; Hadal, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-16

...: Attitude Estimation Using Ground Imagery//Navy Case No. 98,801: Apparatus and Method For Grazing Angle Independent Signal Detection//Navy Case No. 98,946: Apparatus and Method For Compensating Images For...

A novel method for the photographic recovery of fingermark impressions from ammunition cases using digital imaging.

PubMed

Porter, Glenn; Ebeyan, Robert; Crumlish, Charles; Renshaw, Adrian

2015-03-01

The photographic preservation of fingermark impression evidence found on ammunition cases remains problematic due to the cylindrical shape of the deposition substrate preventing complete capture of the impression in a single image. A novel method was developed for the photographic recovery of fingermarks from curved surfaces using digital imaging. The process involves the digital construction of a complete impression image made from several different images captured from multiple camera perspectives. Fingermark impressions deposited onto 9-mm and 0.22-caliber brass cartridge cases and a plastic 12-gauge shotgun shell were tested using various image parameters, including digital stitching method, number of images per 360° rotation of shell, image cropping, and overlap. The results suggest that this method may be successfully used to recover fingermark impression evidence from the surfaces of ammunition cases or other similar cylindrical surfaces. © 2014 American Academy of Forensic Sciences.

Narrative research methods in palliative care contexts: two case studies.

PubMed

Thomas, Carol; Reeve, Joanne; Bingley, Amanda; Brown, Janice; Payne, Sheila; Lynch, Tom

2009-05-01

Narrative methods have played a minor role in research with dying patients to date, and deserve to be more widely understood. This article illustrates the utility and value of these methods through the narrative analysis of semi-structured interview data gathered in a series of interviews with two terminally ill cancer patients and their spouses. The methods and findings associated with these two case studies are outlined and discussed. The authors' contention is that an analytical focus on the naturalistic storytelling of patients and informal carers can throw new light on individuals' perceived illness states and symptoms, care-related needs, behaviors, and desires. In addition, the juxtaposition of two cases that share a number of markers of risk and need at the end of life illustrates how the narrative analysis of patients' experiential accounts can assist in uncovering important distinctions between cases that are of relevance to care management.

Correcting for batch effects in case-control microbiome studies

PubMed Central

Gibbons, Sean M.; Duvallet, Claire

2018-01-01

High-throughput data generation platforms, like mass-spectrometry, microarrays, and second-generation sequencing are susceptible to batch effects due to run-to-run variation in reagents, equipment, protocols, or personnel. Currently, batch correction methods are not commonly applied to microbiome sequencing datasets. In this paper, we compare different batch-correction methods applied to microbiome case-control studies. We introduce a model-free normalization procedure where features (i.e. bacterial taxa) in case samples are converted to percentiles of the equivalent features in control samples within a study prior to pooling data across studies. We look at how this percentile-normalization method compares to traditional meta-analysis methods for combining independent p-values and to limma and ComBat, widely used batch-correction models developed for RNA microarray data. Overall, we show that percentile-normalization is a simple, non-parametric approach for correcting batch effects and improving sensitivity in case-control meta-analyses. PMID:29684016

Enterprise architecture availability analysis using fault trees and stakeholder interviews

NASA Astrophysics Data System (ADS)

Närman, Per; Franke, Ulrik; König, Johan; Buschle, Markus; Ekstedt, Mathias

2014-01-01

The availability of enterprise information systems is a key concern for many organisations. This article describes a method for availability analysis based on Fault Tree Analysis and constructs from the ArchiMate enterprise architecture (EA) language. To test the quality of the method, several case-studies within the banking and electrical utility industries were performed. Input data were collected through stakeholder interviews. The results from the case studies were compared with availability of log data to determine the accuracy of the method's predictions. In the five cases where accurate log data were available, the yearly downtime estimates were within eight hours from the actual downtimes. The cost of performing the analysis was low; no case study required more than 20 man-hours of work, making the method ideal for practitioners with an interest in obtaining rapid availability estimates of their enterprise information systems.

Application of electrical geophysics to the release of water resources, case of Ain Leuh (Morocco)

NASA Astrophysics Data System (ADS)

Zitouni, A.; Boukdir, A.; El Fjiji, H.; Baite, W.; Ekouele Mbaki, V. R.; Ben Said, H.; Echakraoui, Z.; Elissami, A.; El Maslouhi, M. R.

2018-05-01

Being seen needs in increasing waters in our contry for fine domestics, manufactures and agricultural, the prospecting of subterranean waters by geologic and hydrogeologic classic method remains inaplicable in the cases of the regions where one does not arrange drillings or polls (soundings) of gratitude (recongnition) in very sufficient (self-important) number. In that case of figure, the method of prospecting geophysics such as the method of nuclear magnetic resonance (NMR) and the method of the geophysics radar are usually used most usually because they showed, worldwide, results very desive in the projects of prospecting and evaluation of the resources in subterranean waters. In the present work, which concerns only the methodology of the electric resistivity, we treat the adopted methodological approach and the study of the case of application in the tray of Ajdir Ain Leuh.

Optical Sensor/Actuator Locations for Active Structural Acoustic Control

NASA Technical Reports Server (NTRS)

Padula, Sharon L.; Palumbo, Daniel L.; Kincaid, Rex K.

1998-01-01

Researchers at NASA Langley Research Center have extensive experience using active structural acoustic control (ASAC) for aircraft interior noise reduction. One aspect of ASAC involves the selection of optimum locations for microphone sensors and force actuators. This paper explains the importance of sensor/actuator selection, reviews optimization techniques, and summarizes experimental and numerical results. Three combinatorial optimization problems are described. Two involve the determination of the number and position of piezoelectric actuators, and the other involves the determination of the number and location of the sensors. For each case, a solution method is suggested, and typical results are examined. The first case, a simplified problem with simulated data, is used to illustrate the method. The second and third cases are more representative of the potential of the method and use measured data. The three case studies and laboratory test results establish the usefulness of the numerical methods.

Case studies approach for an undergraduate astrobiology course

NASA Astrophysics Data System (ADS)

Burko, Lior M.; Enger, Sandra

2013-04-01

Case studies is a well known and widely used method in law schools, medical schools, and business schools, but relatively little used in physics or astronomy courses. We developed an astrobiology course based strongly on the case studies approach, and after teaching it first at the University of Alabama in Huntsville, we have adapted it and are now teaching it at Alabama A&M University, a HBCU. The case studies approach uses several well tested and successful teaching methods - including group work, peer instruction, current interest topics, just-in-time teaching, &c. We have found that certain styles of cases are more popular among students than other styles, and will revise our cases to reflect such student preferences. We chose astrobiology -- an inherently multidisciplinary field -- because of the popularity of the subject matter, its frequent appearance in the popular media (news stories about searches for life in the universe, the discovery of Earth-like exoplanets, etc, in addition to SciFi movies and novels), and the rapid current progress in the field. In this talk we review briefly the case studies method, the styles of cases used in our astrobiology course, and student response to the course as found in our assessment analysis.

Case Study: Writing a Journal Case Study

ERIC Educational Resources Information Center

Prud'homme-Genereux, Annie

2016-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue describes incorporating a journal article into the classroom by first converting it into a case study.

General image method in a plane-layered elastostatic medium

NASA Technical Reports Server (NTRS)

Fares, N.; Li, V. C.

1988-01-01

The general-image method presently used to obtain the elastostatic fields in plane-layered media relies on the use of potentials in order to represent elastic fields. For the case of a single interface, this method yields the displacement field in closed form, and is applicable to antiplane, plane, and three-dimensional problems. In the case of multiplane interfaces, the image method generates the displacement fields in terms of infinite series whose convergences can be accelerated to improve method efficiency.

A Guideline of Using Case Method in Software Engineering Courses

ERIC Educational Resources Information Center

Zainal, Dzulaiha Aryanee Putri; Razali, Rozilawati; Shukur, Zarina

2014-01-01

Software Engineering (SE) education has been reported to fall short in producing high quality software engineers. In seeking alternative solutions, Case Method (CM) is regarded as having potential to solve the issue. CM is a teaching and learning (T&L) method that has been found to be effective in Social Science education. In principle,…

Success Factors for Using Case Method in Teaching and Learning Software Engineering

ERIC Educational Resources Information Center

Razali, Rozilawati; Zainal, Dzulaiha Aryanee Putri

2013-01-01

The Case Method (CM) has long been used effectively in Social Science education. Its potential use in Applied Science such as Software Engineering (SE) however has yet to be further explored. SE is an engineering discipline that concerns the principles, methods and tools used throughout the software development lifecycle. In CM, subjects are…

Connection of Environmental Education with Application of Experiential Teaching Methods: A Case Study from Greece

ERIC Educational Resources Information Center

Koutsoukos, Marios; Fragoulis, Iosif; Valkanos, Euthimios

2015-01-01

The main objective of this case study is to examine secondary education teachers' opinions concerning the connection of environmental education with the use of experiential teaching methods. Exploring whether the application of experiential methods can upgrade the learning procedure, leading to a more holistic approach, the research focuses on…

Comparison of Three Tobacco Survey Methods with College Students: A Case Study

ERIC Educational Resources Information Center

James, Delores C. S.; Chen, W. William; Sheu, Jiunn-Jye

2005-01-01

The goals of this case study were to: (1) determine the efficiency and effectiveness of three survey methods--postal mail survey, web-based survey, and random in-class administration survey--in assessing tobacco-related attitudes and behaviors among college students and (2) compare the response rate and procedures of these three methods. There was…

Operation Team Spirit: Program Review and Analysis

DTIC Science & Technology

2009-06-01

research was strictly qualitative in nature. The specific method being used was exploratory case study analysis... study , method is used for the specific acts of conducting research , while methodology refers to the qualitative nature of research performed. While...the researcher . According to Leedy and Ormrod (2005), some of the types of methods and their respective purposes include: • Case study :

Innovative Methods for Collecting and Analyzing Qualitative Data: Vignettes and Pre-Structured Cases.

ERIC Educational Resources Information Center

Miles, Matthew B.

Two innovative methods for collecting and analyzing qualitative data are vignettes and pre-structured cases. Vignettes are descriptions of situations or problems written by a professional, with a suggested outline and comments provided by a researcher. Advantages of this method are strength of impact of the written descriptions and efficiency of…

Comparison the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination or ultrasound methods

PubMed Central

Karimzadeh, Hadi; Seyedbonakdar, Zahra; Mousavi, Maryam; Karami, Mehdi

2016-01-01

Background: This study aimed to compare the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination and ultrasound methods. Materials and Methods: This study is a cross-sectional study which was conducted in Al-Zahra Hospital (Isfahan, Iran) during 2014–2015. In our study, ninety patients were selected based on the American College of Rheumatology 2010 criteria. All patients were examined by a rheumatologist to find the existence of effusion, and the data were filled in the checklist. The ultrasonography for detecting effusion in periarticular structures was done by an expert radiologist with two methods, including high-resolution ultrasonography and power Doppler. The percentage of effusion existence found by physical examination was compared by sonography, and the Chi-square and t-tests were used for data analysis. Results: The percentage of effusion found in areas with physical examination by rheumatologist was lower than the frequency distribution of effusions found by sonography (8.3% VS 14.2%) (P < 0.001). In sonography, rotator cuff tendonitis is the most common periarthritis. Other findings in sonography were biceps tendinitis (10 cases), wrist tendonitis (13 cases), olecranon bursitis (9 cases), golfers elbow (4 cases), tennis elbow (4 cases), trochanteric bursitis (6 cases), anserine bursitis (6 cases), prepatellar bursitis (11 cases), and ankle tendonitis (7 cases). Tenderness on physical examination was found in 15% of the cases, and the evidence of periarthritis was found in 21/7% through sonography (P < 0.001) and 34% through Doppler sonography (P < 0.001). Conclusion: The percentage of periarthritis detection by ultrasonography and power Doppler sonography was higher than clinical examination. Hence, the ultrasonography is more accurate than physical examination. PMID:28331520

[Percutaneous cholangiography: Chiba method, a diagnostic advance].

PubMed

Correia, R A; Sampaio, R N; Soares, A C; Feijó, S G; Pessoa, J B

1979-01-01

Employing percutaneous transhepatic cholangiography by CHIBA method in 15 patients, it was possible to visualize biliary system in 93.3% of the cases. The radiologic diagnostic of KLATSKIN tumor was observed in 2 cases, 4 cases of carcinoma of the papila of VATER, 1 case of carcinoma of the terminal choledochus, 1 case of intrahepatic neoplasia, 1 case of stenosis secondary to choledocal, trauma, and in another it was damaged by subcapsular hepatic leakage of contrast. The complications were minor. In 5 cases the patients had biliary colic at the time of the exam. In 2 cases, signals of baeteremia occurred in the day following the exam, and in 4 cases there was a small subcapsular hepatic leakage of contrast. In one case it was encountered hematoma under the capsule of the liver, during surgery. The diagnosis was confirmed at surgery in 12 cases. We concluded that the simplicity of the technic, its low cost and its diagnostic, accuracy have made it extremely useful.

Modeling crime events by d-separation method

NASA Astrophysics Data System (ADS)

Aarthee, R.; Ezhilmaran, D.

2017-11-01

Problematic legal cases have recently called for a scientifically founded method of dealing with the qualitative and quantitative roles of evidence in a case [1].To deal with quantitative, we proposed a d-separation method for modeling the crime events. A d-separation is a graphical criterion for identifying independence in a directed acyclic graph. By developing a d-separation method, we aim to lay the foundations for the development of a software support tool that can deal with the evidential reasoning in legal cases. Such a tool is meant to be used by a judge or juror, in alliance with various experts who can provide information about the details. This will hopefully improve the communication between judges or jurors and experts. The proposed method used to uncover more valid independencies than any other graphical criterion.

The "four quadrants" approach to clinical ethics case analysis; an application and review.

PubMed

Sokol, D K

2008-07-01

In 1982, Jonsen, Siegler and Winslade published Clinical Ethics, in which they described the "four quadrants" approach, a new method of analysing clinical ethics cases. Although the book is now in its 6th edition, a literature search has revealed only one academic paper demonstrating the method at work. This paper is an attempt to start filling this gap. As a way of describing and testing the approach, I apply the four quadrants method to a detailed clinical ethics case. The analysis is interspersed with reflections on the method itself. It is hoped that this experiment will encourage ethicists and clinicians to devote more attention to this neglected approach.

Improved Bone Graft Method for Upper Cervical Surgery with Posterior Approach: Technical Description and Report of 52 Cases.

PubMed

Wang, Yong-Li; Wang, Xiang-Yang

2018-06-01

We sought to report a minimum 12 months' follow-up results of our improved bone graft method for upper cervical surgery with the posterior approach. Among 52 consecutive cases, odontoid nonunion occurred in 33 patients, atlantoaxial instability in 11 patients, and occipitocervical deformity in 8 patients who underwent posterior C1-C2 transarticular screw/screw-rod internal fixation (41 cases) and occipitocervical fusion (11 cases) with the improved bone graft technique. Each surgical procedure was performed by the same senior spine surgeon. We took lateral cervical standing roentgenograms before surgery and immediately after surgery. Then we conducted craniocerebral computed tomography examination with reconstruction at 3, 6, 12, and 24 months and annually thereafter. The postoperative follow-up times are about 12-38 months. All cases showed satisfactory screw fixation by radiographic examination, and there were no postoperative neurologic complications. One case had postoperative retropharyngeal infection after the transoral release and posterior reduction by pedicle screw instrumentation. All patients got solid fusions, and no pseudarthrosis occurred. All cases had solid fusions at the 3-month follow-up. Good bone graft bed, enough bone graft material, solid local fixation, and effective bone graft method are prerequisites for a successful bone graft. By analyzing postoperative follow-up in the consecutive cases in this study, our bone graft method describing a new bone graft structure is a reliable posterior fusion technique. It is worth considering, and further research is needed. Copyright © 2018. Published by Elsevier Inc.

Blended learning in health education: three case studies.

PubMed

de Jong, Nynke; Savin-Baden, Maggi; Cunningham, Anne Marie; Verstegen, Daniëlle M L

2014-09-01

Blended learning in which online education is combined with face-to-face education is especially useful for (future) health care professionals who need to keep up-to-date. Blended learning can make learning more efficient, for instance by removing barriers of time and distance. In the past distance-based learning activities have often been associated with traditional delivery-based methods, individual learning and limited contact. The central question in this paper is: can blended learning be active and collaborative? Three cases of blended, active and collaborative learning are presented. In case 1 a virtual classroom is used to realize online problem-based learning (PBL). In case 2 PBL cases are presented in Second Life, a 3D immersive virtual world. In case 3 discussion forums, blogs and wikis were used. In all cases face-to-face meetings were also organized. Evaluation results of the three cases clearly show that active, collaborative learning at a distance is possible. Blended learning enables the use of novel instructional methods and student-centred education. The three cases employ different educational methods, thus illustrating diverse possibilities and a variety of learning activities in blended learning. Interaction and communication rules, the role of the teacher, careful selection of collaboration tools and technical preparation should be considered when designing and implementing blended learning.

Use of Case-Based or Hands-On Laboratory Exercises with Physiology Lectures Improves Knowledge Retention, but Veterinary Medicine Students Prefer Case-Based Activities

ERIC Educational Resources Information Center

McFee, Renee M.; Cupp, Andrea S.; Wood, Jennifer R.

2018-01-01

Didactic lectures are prevalent in physiology courses within veterinary medicine programs, but more active learning methods have also been utilized. Our goal was to identify the most appropriate learning method to augment the lecture component of our physiology course. We hypothesized that case-based learning would be well received by students and…

A Novel Method of Case Representation and Retrieval in CBR for E-Learning

ERIC Educational Resources Information Center

Khamparia, Aditya; Pandey, Babita

2017-01-01

In this paper we have discussed a novel method which has been developed for representation and retrieval of cases in case based reasoning (CBR) as a part of e-learning system which is based on various student features. In this approach we have integrated Artificial Neural Network (ANN) with Data mining (DM) and CBR. ANN is used to find the…

Automated microaneurysm detection method based on double ring filter in retinal fundus images

NASA Astrophysics Data System (ADS)

Mizutani, Atsushi; Muramatsu, Chisako; Hatanaka, Yuji; Suemori, Shinsuke; Hara, Takeshi; Fujita, Hiroshi

2009-02-01

The presence of microaneurysms in the eye is one of the early signs of diabetic retinopathy, which is one of the leading causes of vision loss. We have been investigating a computerized method for the detection of microaneurysms on retinal fundus images, which were obtained from the Retinopathy Online Challenge (ROC) database. The ROC provides 50 training cases, in which "gold standard" locations of microaneurysms are provided, and 50 test cases without the gold standard locations. In this study, the computerized scheme was developed by using the training cases. Although the results for the test cases are also included, this paper mainly discusses the results for the training cases because the "gold standard" for the test cases is not known. After image preprocessing, candidate regions for microaneurysms were detected using a double-ring filter. Any potential false positives located in the regions corresponding to blood vessels were removed by automatic extraction of blood vessels from the images. Twelve image features were determined, and the candidate lesions were classified into microaneurysms or false positives using the rule-based method and an artificial neural network. The true positive fraction of the proposed method was 0.45 at 27 false positives per image. Forty-two percent of microaneurysms in the 50 training cases were considered invisible by the consensus of two co-investigators. When the method was evaluated for visible microaneurysms, the sensitivity for detecting microaneurysms was 65% at 27 false positives per image. Our computerized detection scheme could be improved for helping ophthalmologists in the early diagnosis of diabetic retinopathy.

[Clinical Value of Cell Block in the Diagnosis of Malignant Pleural Effusion].

PubMed

Wang, Xintong; Cheng, Fangyuan; Zhong, Diansheng; Zhang, Lisha; Meng, Fanlu; Shao, Yi; Yu, Tao

2017-06-20

Malignant pleural effusion (MPE) is due tumor which arises from the mesothelium or metastases from tumor origniating other sites. Generally, the prognosis of MPE is poor, in the premise of reducing the pain of patients, as soon as possible make clear the property of pleural effusion and cause of the disesease, rightly and quickly, providing effective information for subsequent treatment. The cell block of 103 patients by using natural sedimentation or plasma coagulation method combined with HE staining and immunohistochemical staining method maked clear diagnosis and compared with other methods. 90 patients were diagnosed by cell block section from 103 patients who had MPE (diagnostic rate 87.4%); 32 cases were diagnosed by cell block section only, 74 cases pointed out that the pathological type , 23 cases even pointed out the primary lesions; 71 cases examined other invasive methods at the same time, the diagnostic rate was 87.3% and 81.7%; the detection rate of cell block section and cytological smear in detecting malignant tumor cells was 86.7%and 44.0% respectively. Cell block can not only increase the diagnosis, in contrast to cytological smear, and own the same diagnostic rate compared with other invasive methods, but also can confirm pathological type and primary lesion; especially, for other invasive methods, cell block method is a preferable complementary method, and that cell block method maybe the only way for some patients.

Acute and chronic alcohol use correlated with methods of suicide in a Swiss national sample.

PubMed

Pfeifer, P; Bartsch, C; Hemmer, A; Reisch, T

2017-09-01

Chronic and acute alcohol use are highly associated risk factors for suicides worldwide. Therefore, we examined suicide cases with and without alcohol use disorder (AUD) using data from the SNSF project "Suicide in Switzerland: A detailed national survey". Our investigations focus on correlations between acute and chronic alcohol use with reference to suicide and potential interactions with the methods of suicide. We used data from the SNSF project in which all cases of registered completed suicide in Switzerland reported to any of the seven Swiss institutes of legal and forensic medicine between 2000 and 2010 were collected. We extracted cases that were tested for blood alcohol to use in our analysis. We compared clinical characteristics, blood alcohol concentrations, and methods of suicide in cases with and without AUD. Out of 6497 cases, 2946 subjects were tested for acute alcohol use and included in our analysis. Of the latter, 366 (12.4%) persons had a medical history of AUD. Subjects with AUD significantly had higher blood alcohol concentrations and were more often in medical treatment before suicide. Drug intoxication as method of suicide was more frequent in cases with AUD compared to NAUD. Overall, we found a high incidence of acute alcohol use at the time of death in chronic alcohol misusers (AUD). The five methods of suicide most commonly used in Switzerland differed considerably between individuals with and without AUD. Blood alcohol concentrations varied across different methods of suicide independently from the medical history in both groups. Copyright © 2017 Elsevier B.V. All rights reserved.

Case Study: Puttin' on the Ritz: How to Put Science into Cases

ERIC Educational Resources Information Center

Herreid, Clyde Freeman

2017-01-01

There are multiple ways to put science into a case. This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses different ways of presenting science in case studies.

Teaching with Cases: Learning to Question.

ERIC Educational Resources Information Center

Boehrer, John; Linsky, Marty

1990-01-01

This chapter discusses the origins of the case method, looks at the question of what is a case, gives ideas about learning in case teaching, the purposes it can serve in the classroom, the ground rules for case discussion, including the role of questions, and new directions for case teaching. (MLW)

Electrical resistance tomography using steel cased boreholes as electrodes

DOEpatents

Daily, W.D.; Ramirez, A.L.

1999-06-22

An electrical resistance tomography method is described which uses steel cased boreholes as electrodes. The method enables mapping the electrical resistivity distribution in the subsurface from measurements of electrical potential caused by electrical currents injected into an array of electrodes in the subsurface. By use of current injection and potential measurement electrodes to generate data about the subsurface resistivity distribution, which data is then used in an inverse calculation, a model of the electrical resistivity distribution can be obtained. The inverse model may be constrained by independent data to better define an inverse solution. The method utilizes pairs of electrically conductive (steel) borehole casings as current injection electrodes and as potential measurement electrodes. The greater the number of steel cased boreholes in an array, the greater the amount of data is obtained. The steel cased boreholes may be utilized for either current injection or potential measurement electrodes. The subsurface model produced by this method can be 2 or 3 dimensional in resistivity depending on the detail desired in the calculated resistivity distribution and the amount of data to constrain the models. 2 figs.

Electrical resistance tomography using steel cased boreholes as electrodes

DOEpatents

Daily, William D.; Ramirez, Abelardo L.

1999-01-01

An electrical resistance tomography method using steel cased boreholes as electrodes. The method enables mapping the electrical resistivity distribution in the subsurface from measurements of electrical potential caused by electrical currents injected into an array of electrodes in the subsurface. By use of current injection and potential measurement electrodes to generate data about the subsurface resistivity distribution, which data is then used in an inverse calculation, a model of the electrical resistivity distribution can be obtained. The inverse model may be constrained by independent data to better define an inverse solution. The method utilizes pairs of electrically conductive (steel) borehole casings as current injection electrodes and as potential measurement electrodes. The greater the number of steel cased boreholes in an array, the greater the amount of data is obtained. The steel cased boreholes may be utilized for either current injection or potential measurement electrodes. The subsurface model produced by this method can be 2 or 3 dimensional in resistivity depending on the detail desired in the calculated resistivity distribution and the amount of data to constain the models.

A comparison of fitness-case sampling methods for genetic programming

NASA Astrophysics Data System (ADS)

Martínez, Yuliana; Naredo, Enrique; Trujillo, Leonardo; Legrand, Pierrick; López, Uriel

2017-11-01

Genetic programming (GP) is an evolutionary computation paradigm for automatic program induction. GP has produced impressive results but it still needs to overcome some practical limitations, particularly its high computational cost, overfitting and excessive code growth. Recently, many researchers have proposed fitness-case sampling methods to overcome some of these problems, with mixed results in several limited tests. This paper presents an extensive comparative study of four fitness-case sampling methods, namely: Interleaved Sampling, Random Interleaved Sampling, Lexicase Selection and Keep-Worst Interleaved Sampling. The algorithms are compared on 11 symbolic regression problems and 11 supervised classification problems, using 10 synthetic benchmarks and 12 real-world data-sets. They are evaluated based on test performance, overfitting and average program size, comparing them with a standard GP search. Comparisons are carried out using non-parametric multigroup tests and post hoc pairwise statistical tests. The experimental results suggest that fitness-case sampling methods are particularly useful for difficult real-world symbolic regression problems, improving performance, reducing overfitting and limiting code growth. On the other hand, it seems that fitness-case sampling cannot improve upon GP performance when considering supervised binary classification.

Analysis of Classes of Superlinear Semipositone Problems with Nonlinear Boundary Conditions

NASA Astrophysics Data System (ADS)

Morris, Quinn A.

We study positive radial solutions for classes of steady state reaction diffusion problems on the exterior of a ball with both Dirichlet and nonlinear boundary conditions. We consider p-Laplacian problems (p > 1) with reaction terms which are superlinear at infinity and semipositone. In the case p = 2, using variational methods, we establish the existence of a solution, and via detailed analysis of the Green's function, we prove the positivity of the solution. In the case p ≠ 2, we again use variational methods to establish the existence of a solution, but the positivity of the solution is achieved via sophisticated a priori estimates. In the case p ≠ 2, the Green's function analysis is no longer available. Our results significantly enhance the literature on superlinear semipositone problems. Finally, we provide algorithms for the numerical generation of exact bifurcation curves for one-dimensional problems. In the autonomous case, we extend and analyze a quadrature method, and using nonlinear solvers in Mathematica, generate bifurcation curves. In the nonautonomous case, we employ shooting methods in Mathematica to generate bifurcation curves.

Valid statistical inference methods for a case-control study with missing data.

PubMed

Tian, Guo-Liang; Zhang, Chi; Jiang, Xuejun

2018-04-01

The main objective of this paper is to derive the valid sampling distribution of the observed counts in a case-control study with missing data under the assumption of missing at random by employing the conditional sampling method and the mechanism augmentation method. The proposed sampling distribution, called the case-control sampling distribution, can be used to calculate the standard errors of the maximum likelihood estimates of parameters via the Fisher information matrix and to generate independent samples for constructing small-sample bootstrap confidence intervals. Theoretical comparisons of the new case-control sampling distribution with two existing sampling distributions exhibit a large difference. Simulations are conducted to investigate the influence of the three different sampling distributions on statistical inferences. One finding is that the conclusion by the Wald test for testing independency under the two existing sampling distributions could be completely different (even contradictory) from the Wald test for testing the equality of the success probabilities in control/case groups under the proposed distribution. A real cervical cancer data set is used to illustrate the proposed statistical methods.

Using case studies to teach an engineering technology technical writing class

NASA Technical Reports Server (NTRS)

Green, M. M.

1981-01-01

The use of the case method in teaching various technical communication skills is described. Features of the method considered include: solving communication problems, identifying an audience, planning written communications, presenting written communications, and using visual aids.

A Case Study in Persuasive Effect: Lyman Beecher on Duelling

ERIC Educational Resources Information Center

Minnick, Wayne C.

1971-01-01

The purpose of this paper is to describe and criticize methods critics commonly use to judge speech effects from historical records alone, and to provide a case study illustrating the application of those methods. (Author/JB)

Fan broadband interaction noise modeling using a low-order method

NASA Astrophysics Data System (ADS)

Grace, S. M.

2015-06-01

A low-order method for simulating broadband interaction noise downstream of the fan stage in a turbofan engine is explored in this paper. The particular noise source of interest is due to the interaction of the fan rotor wake with the fan exit guide vanes (FEGVs). The vanes are modeled as flat plates and the method utilizes strip theory relying on unsteady aerodynamic cascade theory at each strip. This paper shows predictions for 6 of the 9 cases from NASA's Source Diagnostic Test (SDT) and all 4 cases from the 2014 Fan Broadband Workshop Fundamental Case 2 (FC2). The turbulence in the rotor wake is taken from hot-wire data for the low speed SDT cases and the FC2 cases. Additionally, four different computational simulations of the rotor wake flow for all of the SDT rotor speeds have been used to determine the rotor wake turbulence parameters. Comparisons between predictions based on the different inputs highlight the possibility of a potential effect present in the hot-wire data for the SDT as well as the importance of accurately describing the turbulence length scale when using this model. The method produces accurate predictions of the spectral shape for all of the cases. It also predicts reasonably well all of the trends that can be considered based on the included cases such as vane geometry, vane count, turbulence level, and rotor speed.

Research study for effects of case flexibility on bearing loads and rotor stability

NASA Technical Reports Server (NTRS)

Fenwick, J. R.; Tarn, R. B.

1984-01-01

Methods to evaluate the effect of casing flexibility on rotor stability and component loads were developed. Recent Rocketdyne turbomachinery was surveyed to determine typical properties and frequencies versus running speed. A small generic rotor was run with a flexible case with parametric variations in casing properties for comparison with a rotor attached to rigid supports. A program for the IBM personal computer for interactive evaluation of rotors and casings is developed. The Root locus method is extended for use in rotor dynamics for symmetrical systems by transforming all motion and coupling into a single plane and using a 90 degree criterion when plotting loci.

Fetal Intelligent Navigation Echocardiography (FINE): a novel method for rapid, simple, and automatic examination of the fetal heart.

PubMed

Yeo, Lami; Romero, Roberto

2013-09-01

To describe a novel method (Fetal Intelligent Navigation Echocardiography (FINE)) for visualization of standard fetal echocardiography views from volume datasets obtained with spatiotemporal image correlation (STIC) and application of 'intelligent navigation' technology. We developed a method to: 1) demonstrate nine cardiac diagnostic planes; and 2) spontaneously navigate the anatomy surrounding each of the nine cardiac diagnostic planes (Virtual Intelligent Sonographer Assistance (VIS-Assistance®)). The method consists of marking seven anatomical structures of the fetal heart. The following echocardiography views are then automatically generated: 1) four chamber; 2) five chamber; 3) left ventricular outflow tract; 4) short-axis view of great vessels/right ventricular outflow tract; 5) three vessels and trachea; 6) abdomen/stomach; 7) ductal arch; 8) aortic arch; and 9) superior and inferior vena cava. The FINE method was tested in a separate set of 50 STIC volumes of normal hearts (18.6-37.2 weeks of gestation), and visualization rates for fetal echocardiography views using diagnostic planes and/or VIS-Assistance® were calculated. To examine the feasibility of identifying abnormal cardiac anatomy, we tested the method in four cases with proven congenital heart defects (coarctation of aorta, tetralogy of Fallot, transposition of great vessels and pulmonary atresia with intact ventricular septum). In normal cases, the FINE method was able to generate nine fetal echocardiography views using: 1) diagnostic planes in 78-100% of cases; 2) VIS-Assistance® in 98-100% of cases; and 3) a combination of diagnostic planes and/or VIS-Assistance® in 98-100% of cases. In all four abnormal cases, the FINE method demonstrated evidence of abnormal fetal cardiac anatomy. The FINE method can be used to visualize nine standard fetal echocardiography views in normal hearts by applying 'intelligent navigation' technology to STIC volume datasets. This method can simplify examination of the fetal heart and reduce operator dependency. The observation of abnormal echocardiography views in the diagnostic planes and/or VIS-Assistance® should raise the index of suspicion for congenital heart disease. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

To BECCS or Not To BECCS: A Question of Method

NASA Astrophysics Data System (ADS)

DeCicco, J. M.

2017-12-01

Bioenergy with carbon capture and storage (BECCS) is seen as an important option in many climate stabilization scenarios. Limited demonstrations are underway, including a system that captures and sequesters the fermentation CO2 from ethanol production. However, its net CO2 emissions are uncertain for reasons related to both system characteristics and methodological issues. As for bioenergy in general, evaluations draw on both ecological and engineering methods. It is informative to apply different methods using available data for demonstration systems in comparison to related bioenergy systems. To do so, this paper examines a case study BECCS system and addresses questions regarding the utilization of terrestrial carbon, biomass sustainability and the implications for scalability. The analysis examines four systems, all utilizing the same land area, using two methods. The cases are: A) a crop system without either biofuel production or CCS; B) a biofuel production system without CCS; C) biofuel system with CCS, i.e., the BECCS case, and D) a crop system without biofuel production or CCS but with crop residue removal and conversion to a stable char. In cases A and D, the delivered fuel is fossil-based; in cases B and C the fuel is biomass-based. The first method is LCA, involving steady-flow modeling of systems over a defined lifecycle, following current practice as seen in the attributional LCA component of California's Low-Carbon Fuel Standard (LCFS). The second method involves spatially and temporally explicit analysis, reflecting the dynamics of carbon exchanges with the atmosphere. Although parameters are calibrated to the California LCFS LCA model, simplified spreadsheet modeling is used to maximize transparency while highlighting assumptions that most influence the results. The analysis reveals distinctly different pictures of net CO2 emissions for the cases examined, with the dynamic method painting a less optimistic picture of the BECCS system than the LCA method. Differences in results are traced to differing representations of terrestrial carbon exchanges and associated modeling assumptions. We conclude with suggestions for future work on project- and program-scale carbon accounting methods and the need for caution in advancing BECCS before such methods are better validated.

Case Series Investigations in Cognitive Neuropsychology

PubMed Central

Schwartz, Myrna F.; Dell, Gary S.

2011-01-01

Case series methodology involves the systematic assessment of a sample of related patients, with the goal of understanding how and why they differ from one another. This method has become increasingly important in cognitive neuropsychology, which has long been identified with single-subject research. We review case series studies dealing with impaired semantic memory, reading, and language production, and draw attention to the affinity of this methodology for testing theories that are expressed as computational models and for addressing questions about neuroanatomy. It is concluded that case series methods usefully complement single-subject techniques. PMID:21714756

Reasoning with case histories of process knowledge for efficient process development

NASA Technical Reports Server (NTRS)

Bharwani, Seraj S.; Walls, Joe T.; Jackson, Michael E.

1988-01-01

The significance of compiling case histories of empirical process knowledge and the role of such histories in improving the efficiency of manufacturing process development is discussed in this paper. Methods of representing important investigations as cases and using the information from such cases to eliminate redundancy of empirical investigations in analogous process development situations are also discussed. A system is proposed that uses such methods to capture the problem-solving framework of the application domain. A conceptual design of the system is presented and discussed.

Implementation of Performance-Based Acquisition in Non-Western Countries

DTIC Science & Technology

2009-03-01

narratives , phenomenologies , ethnographies , grounded theory studies , or case studies . The researcher collects...are biography, phenomenological study , grounded theory study , ethnography , and case study . The approach used for qualitative data collection method ... qualitative methods , such as the grounded theory approach to

The Case Method for Teaching College Economics

ERIC Educational Resources Information Center

Griffith, John R., Jr.

1971-01-01

The author explains the use of the case method of applying the principles of economics to current economic policy issues. This approach allows the classroom economics teacher to teach the student how to apply economic principles to real life problems. (Author)

Assembling a Case Study Tool Kit: 10 Tools for Teaching with Cases

ERIC Educational Resources Information Center

Prud'homme-Généreux, Annie

2017-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. The author shares the strategies and tools that teachers can use to manage a case study classroom effectively.

A method for retrieving endodontic or atypical nonendodontic separated instruments from the root canal: a report of two cases.

PubMed

Monteiro, Jardel Camilo do Carmo; Kuga, Milton Carlos; Dantas, Andrea Abi Rached; Jordão-Basso, Keren Cristina Fagundes; Keine, Katia Cristina; Ruchaya, Prashant Jay; Faria, Gisele; Leonardo, Renato de Toledo

2014-11-01

This clinical report presents a new method for retrieving separated instruments from the root canal with minimally invasive procedures. The presence of separated instrument in root canal may interfere in the endodontic treatment prognosis. There are several recommended methods to retrieve separated instruments, but some are difficult in clinically practice. This study describes two cases of separated instrument removal from the root canal using a stainless-steel prepared needle associated with a K-file. Case 1 presented a fractured gutta-percha condenser within the mandibular second premolar, it was separated during incorrect intracanal medication calcium hydroxide placement. Case 2 had a fractured sewing needle within the upper central incisor that the patient used to remove food debris from the root canal. After cervical preparation, the fractured instruments were fitted inside a prepared needle and then an endodontic instrument (#25 K-file) was adapted with clockwise turning motion between the needle inner wall and the fragment. The endodontic or atypical nonendodontic separated instrument may be easily pull on of the root canal using a single and low cost device. The methods for retrieving separated instruments from root canal are difficult and destructive procedures. The present case describes a simple method to solve this problem.

Safety and efficacy of endoscopic submucosal dissection using IT knife nano with clip traction method for early esophageal squamous cell carcinoma.

PubMed

Kitagawa, Yoshiyasu; Suzuki, Takuto; Hara, Taro; Yamaguchi, Taketo

2018-01-01

Although endoscopic submucosal dissection (ESD) is an accepted and established treatment for early esophageal squamous cell carcinoma (EESCC), it is technically difficult, time consuming, and less safe than endoscopic mucosal resection. To perform ESD safely and more efficiently, we proposed a new technique of esophageal ESD using an IT knife nano with the clip traction method. This study aimed to evaluate the efficacy and safety of ESD using this new technique. We retrospectively reviewed all consecutive cases of esophageal ESD performed using an IT knife nano with the clip traction method at our hospital between March 2013 and January 2017. Therapeutic efficacy and safety were also assessed. A total of 103 patients underwent esophageal ESD using the IT knife nano with the clip traction method. In all cases, we performed en bloc resection. Complete resection was achieved in 100 cases (97.1%). The median operating time was 40 (range 13-230) min. No cases of perforation or delayed bleeding occurred. Although two cases (2.0%) of mediastinal emphysema occurred without visible perforation at endoscopy, all were successfully managed conservatively. The new technique of esophageal ESD using the IT knife nano with the clip traction method appears to be feasible, effective, and safe for EESCC treatment.

Scenario-Based Case Study Method and the Functionality of the Section Called "From Production to Consumption" from the Perspective of Primary School Students

ERIC Educational Resources Information Center

Taneri, Ahu

2018-01-01

In this research, the aim was showing the evaluation of students on scenario-based case study method and showing the functionality of the studied section called "from production to consumption". Qualitative research method and content analysis were used to reveal participants' experiences and reveal meaningful relations regarding…

Attitude determination using vector observations: A fast optimal matrix algorithm

NASA Technical Reports Server (NTRS)

Markley, F. Landis

1993-01-01

The attitude matrix minimizing Wahba's loss function is computed directly by a method that is competitive with the fastest known algorithm for finding this optimal estimate. The method also provides an estimate of the attitude error covariance matrix. Analysis of the special case of two vector observations identifies those cases for which the TRIAD or algebraic method minimizes Wahba's loss function.

The Influence of Alternative Pedagogical Methods in Postsecondary Biology Education: How Do Students Experience a Multimedia Case-Study Environment?

ERIC Educational Resources Information Center

Wolter, Bjorn Hugo Karl

2010-01-01

The purpose of this study was to better understand how an online, multimedia case study method influenced students' motivation, performance, and perceptions of science in collegiate level biology classes. It utilized a mix-methods design including data from pre- and post-test, student surveys, and focus group interviews to answer one primary…

Structural optimization of large structural systems by optimality criteria methods

NASA Technical Reports Server (NTRS)

Berke, Laszlo

1992-01-01

The fundamental concepts of the optimality criteria method of structural optimization are presented. The effect of the separability properties of the objective and constraint functions on the optimality criteria expressions is emphasized. The single constraint case is treated first, followed by the multiple constraint case with a more complex evaluation of the Lagrange multipliers. Examples illustrate the efficiency of the method.

Implementation of the Harvard Case Method through a Plan-Do-Check-Act Framework in a University Course

ERIC Educational Resources Information Center

Shieh, Ruey S.; Lyu, Jr Jung; Cheng, Yun-Yao

2012-01-01

In 2005, the Harvard Business School began to promote the Harvard case method (HCM) within the Asian region. Because of differences in classroom culture between Asian and Western countries, Asian participants' reaction to the HCM implementation is of interest. This study explores how the western initiated method was implemented in one of the Asian…

Impact of Active Teaching Methods Implemented on Therapeutic Chemistry Module: Performance and Impressions of First-Year Pharmacy Students

ERIC Educational Resources Information Center

Derfoufi, Sanae; Benmoussa, Adnane; El Harti, Jaouad; Ramli, Youssef; Taoufik, Jamal; Chaouir, Souad

2015-01-01

This study investigates the positive impact of the Case Method implemented during a 4- hours tutorial in "therapeutic chemistry module." We view the Case Method as one particular approach within the broader spectrum of problem based or inquiry based learning approaches. Sixty students were included in data analysis. A pre-test and…

A primitive study on unsupervised anomaly detection with an autoencoder in emergency head CT volumes

NASA Astrophysics Data System (ADS)

Sato, Daisuke; Hanaoka, Shouhei; Nomura, Yukihiro; Takenaga, Tomomi; Miki, Soichiro; Yoshikawa, Takeharu; Hayashi, Naoto; Abe, Osamu

2018-02-01

Purpose: The target disorders of emergency head CT are wide-ranging. Therefore, people working in an emergency department desire a computer-aided detection system for general disorders. In this study, we proposed an unsupervised anomaly detection method in emergency head CT using an autoencoder and evaluated the anomaly detection performance of our method in emergency head CT. Methods: We used a 3D convolutional autoencoder (3D-CAE), which contains 11 layers in the convolution block and 6 layers in the deconvolution block. In the training phase, we trained the 3D-CAE using 10,000 3D patches extracted from 50 normal cases. In the test phase, we calculated abnormalities of each voxel in 38 emergency head CT volumes (22 abnormal cases and 16 normal cases) for evaluation and evaluated the likelihood of lesion existence. Results: Our method achieved a sensitivity of 68% and a specificity of 88%, with an area under the curve of the receiver operating characteristic curve of 0.87. It shows that this method has a moderate accuracy to distinguish normal CT cases to abnormal ones. Conclusion: Our method has potentialities for anomaly detection in emergency head CT.

Bacterial meningitis in children under 15 years of age in Nepal.

PubMed

Shrestha, Rajani Ghaju; Tandukar, Sarmila; Ansari, Shamshul; Subedi, Akriti; Shrestha, Anisha; Poudel, Rekha; Adhikari, Nabaraj; Basnyat, Shital Raj; Sherchand, Jeevan Bahadur

2015-08-19

Bacterial meningitis in children is a life-threatening problem resulting in severe morbidity and mortality. For the prompt initiation of antibacterial therapy, rapid and reliable diagnostic methods are of utmost importance. Therefore, this study was designed to find out the rate of bacterial pathogens of meningitis from suspected cases by performing conventional methods and latex agglutination. A descriptive type of study was carried out from May 2012 to April 2013. Cerebrospinal fluid (CSF) specimens from 252 suspected cases of meningitis were subjected for Gram staining, bacterial culture and latex agglutination test. The identification of growth of bacteria was done following standard microbiological methods recommended by American Society for Microbiology. Antibiotic sensitivity testing was done by modified Kirby-Bauer disk diffusion method. From the total 252 suspected cases, 7.2 % bacterial meningitis was revealed by Gram staining and culture methods whereas latex agglutination method detected 5.6 %. Gram-negative organisms contributed the majority of the cases (72.2 %) with Haemophilus influenzae as the leading pathogen for meningitis. Overall, 33.3 % mortality rate was found. In conclusion, a significant rate of bacterial meningitis was found in this study prompting concern for national wide surveillance.

Modification of the flow pass method as applied to problems of chemistry of planet atmospheres

NASA Technical Reports Server (NTRS)

Parshev, V. A.

1980-01-01

It was shown that the modified flow pass method possesses considerable effectiveness, both in the case when the coefficient of diffusion changes severely in the examined region and in the case when diffusion is the prevalent process, as compared with chemical reactions. The case when a regular pass proves inapplicable, or applicable in a limited interval of the decisive parameters, was examined.

Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

PubMed

Vogt, Marjorie A; Schaffner, Barbara H

2016-07-01

Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using the two-source capture-recapture method to estimate the incidence of acute flaccid paralysis in Victoria, Australia.

PubMed Central

Whitfield, Kathryn; Kelly, Heath

2002-01-01

OBJECTIVE: To estimate the incidence and the completeness of ascertainment of acute flaccid paralysis (AFP) in Victoria, Australia, in 1998-2000 and to determine its common causes among children aged under 15 years. METHODS:: The two-source capture-recapture method was used to estimate the incidence of cases of AFP and to evaluate case ascertainment in the routine surveillance system. The primary and secondary data sources were notifications from this system and inpatient hospital records, respectively. FINDINGS: The routine surveillance system indicated that there were 14 cases and the hospital record review identified 19 additional cases. According to the two-source capture-recapture method, there would have been 40 cases during this period (95% confidence interval (CI) = 29-51), representing an average annual incidence of 1.4 per 100000 children aged under 15 years (95% CI = 1.1- 1.7). Thus case ascertainment based on routine surveillance was estimated to be 35% complete. Guillain-Barré syndrome was the commonest single cause of AFP. CONCLUSIONS: Routine surveillance for AFP in Victoria was insensitive. A literature review indicated that the capture-recapture estimates obtained in this study were plausible. The present results help to define a target notification rate for surveillance in settings where poliomyelitis is not endemic. PMID:12481205

Putting Words in Their Mouth: Writing Dialogue for Case Studies

ERIC Educational Resources Information Center

Herreid, Clyde Freeman

2018-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This issue discusses dialogue writing guidelines most relevant to case writing.

Identification of Bodies by Unique Serial Numbers on Implanted Medical Devices.

PubMed

Blessing, Melissa M; Lin, Peter T

2018-05-01

Visual identification is the most common identification method used by medical examiners but is not always possible. Alternative methods include X-ray, fingerprint, or DNA comparison, but these methods require additional resources. Comparison of serial numbers on implanted medical devices is a rapid and definitive method of identification. To assess the practicality of using this method, we reviewed 608 consecutive forensic autopsies performed at a regional medical examiner office. Of these, 56 cases required an alternative method of identification due to decomposition (n = 35), gunshot wound (n = 9), blunt trauma (n = 6), or charring (n = 6). Of these 56 cases, eight (14.3%) were known to have an implanted medical device. Of these eight cases, five (63%) could be positively identified by comparing serial numbers. If an implanted medical device is known to be present, and medical records are available, identification by medical device serial number should be a first-line method. © 2017 American Academy of Forensic Sciences.

Statistical methods for studying disease subtype heterogeneity.

PubMed

Wang, Molin; Spiegelman, Donna; Kuchiba, Aya; Lochhead, Paul; Kim, Sehee; Chan, Andrew T; Poole, Elizabeth M; Tamimi, Rulla; Tworoger, Shelley S; Giovannucci, Edward; Rosner, Bernard; Ogino, Shuji

2016-02-28

A fundamental goal of epidemiologic research is to investigate the relationship between exposures and disease risk. Cases of the disease are often considered a single outcome and assumed to share a common etiology. However, evidence indicates that many human diseases arise and evolve through a range of heterogeneous molecular pathologic processes, influenced by diverse exposures. Pathogenic heterogeneity has been considered in various neoplasms such as colorectal, lung, prostate, and breast cancers, leukemia and lymphoma, and non-neoplastic diseases, including obesity, type II diabetes, glaucoma, stroke, cardiovascular disease, autism, and autoimmune disease. In this article, we discuss analytic options for studying disease subtype heterogeneity, emphasizing methods for evaluating whether the association of a potential risk factor with disease varies by disease subtype. Methods are described for scenarios where disease subtypes are categorical and ordinal and for cohort studies, matched and unmatched case-control studies, and case-case study designs. For illustration, we apply the methods to a molecular pathological epidemiology study of alcohol intake and colon cancer risk by tumor LINE-1 methylation subtypes. User-friendly software to implement the methods is publicly available. Copyright © 2015 John Wiley & Sons, Ltd.

Vibration modelling and verifications for whole aero-engine

NASA Astrophysics Data System (ADS)

Chen, G.

2015-08-01

In this study, a new rotor-ball-bearing-casing coupling dynamic model for a practical aero-engine is established. In the coupling system, the rotor and casing systems are modelled using the finite element method, support systems are modelled as lumped parameter models, nonlinear factors of ball bearings and faults are included, and four types of supports and connection models are defined to model the complex rotor-support-casing coupling system of the aero-engine. A new numerical integral method that combines the Newmark-β method and the improved Newmark-β method (Zhai method) is used to obtain the system responses. Finally, the new model is verified in three ways: (1) modal experiment based on rotor-ball bearing rig, (2) modal experiment based on rotor-ball-bearing-casing rig, and (3) fault simulations for a certain type of missile turbofan aero-engine vibration. The results show that the proposed model can not only simulate the natural vibration characteristics of the whole aero-engine but also effectively perform nonlinear dynamic simulations of a whole aero-engine with faults.

Time-series-based hybrid mathematical modelling method adapted to forecast automotive and medical waste generation: Case study of Lithuania.

PubMed

Karpušenkaitė, Aistė; Ruzgas, Tomas; Denafas, Gintaras

2018-05-01

The aim of the study was to create a hybrid forecasting method that could produce higher accuracy forecasts than previously used 'pure' time series methods. Mentioned methods were already tested with total automotive waste, hazardous automotive waste, and total medical waste generation, but demonstrated at least a 6% error rate in different cases and efforts were made to decrease it even more. Newly developed hybrid models used a random start generation method to incorporate different time-series advantages and it helped to increase the accuracy of forecasts by 3%-4% in hazardous automotive waste and total medical waste generation cases; the new model did not increase the accuracy of total automotive waste generation forecasts. Developed models' abilities to forecast short- and mid-term forecasts were tested using prediction horizon.

[Evaluation of the methods of treatment of epithelioma basocellulare at the I Dermatology Clinic, Silesian Medical Academy, in Katowice].

PubMed

Brzezińska-Wcisło, L; Bogdanowski, T; Suwała-Jurczyk, B

1990-01-01

The therapeutic results are presented in cases of basocellular epithelioma treated by three methods. The best and most radical results were obtained by the surgical method, followed in the order of effectiveness by radiotherapy (45-55 kV) in a total dose of 4500-6000 R. In case of contraindications to these methods local chemotherapy was applied which was associated with a high proportion of failures (28.6%).

Methods of applying the 1994 case definition of chronic fatigue syndrome - impact on classification and observed illness characteristics.

PubMed

Unger, E R; Lin, J-M S; Tian, H; Gurbaxani, B M; Boneva, R S; Jones, J F

2016-01-01

Multiple case definitions are in use to identify chronic fatigue syndrome (CFS). Even when using the same definition, methods used to apply definitional criteria may affect results. The Centers for Disease Control and Prevention (CDC) conducted two population-based studies estimating CFS prevalence using the 1994 case definition; one relied on direct questions for criteria of fatigue, functional impairment and symptoms (1997 Wichita; Method 1), and the other used subscale score thresholds of standardized questionnaires for criteria (2004 Georgia; Method 2). Compared to previous reports the 2004 CFS prevalence estimate was higher, raising questions about whether changes in the method of operationalizing affected this and illness characteristics. The follow-up of the Georgia cohort allowed direct comparison of both methods of applying the 1994 case definition. Of 1961 participants (53 % of eligible) who completed the detailed telephone interview, 919 (47 %) were eligible for and 751 (81 %) underwent clinical evaluation including medical/psychiatric evaluations. Data from the 499 individuals with complete data and without exclusionary conditions was available for this analysis. A total of 86 participants were classified as CFS by one or both methods; 44 cases identified by both methods, 15 only identified by Method 1, and 27 only identified by Method 2 (Kappa 0.63; 95 % confidence interval [CI]: 0.53, 0.73 and concordance 91.59 %). The CFS group identified by both methods were more fatigued, had worse functioning, and more symptoms than those identified by only one method. Moderate to severe depression was noted in only one individual who was classified as CFS by both methods. When comparing the CFS groups identified by only one method, those only identified by Method 2 were either similar to or more severely affected in fatigue, function, and symptoms than those only identified by Method 1. The two methods demonstrated substantial concordance. While Method 2 classified more participants as CFS, there was no indication that they were less severely ill or more depressed. The classification differences do not fully explain the prevalence increase noted in the 2004 Georgia study. Use of standardized instruments for the major CFS domains provides advantages for disease stratification and comparing CFS patients to other illnesses.

Interaction between human blood platelets, viruses and antibodies. IV. Post-Rubella thrombocytopenic purpura and platelet aggregation by Rubella antigen–antibody interaction

PubMed Central

Myllylä, G.; Vaheri, A.; Vesikari, T.; Penttinen, K.

1969-01-01

A new method of measuring antibodies by observing sedimentation patterns of platelets has been compared with the complement fixation and haemagglutination inhibition techniques in ten cases of Rubella and seven cases of post-Rubella thrombocytopenic purpura. The method is based on the aggregation of platelets by the joint action of antibody and small size antigens. The platelet aggregation method gave exceptionally high titres in cases of post-Rubella thrombocytopenic purpura. Other serologic methods did not give these high titres. The hypothesis that small size virus antigen and antibody against it are both needed to induce thrombocytopenia during the recovery period is discussed. Large amounts of both may result in clinical symptoms. PMID:5814719

[Analysis for Discordance of Positive and Negative Blood Typing by Gel Card].

PubMed

Li, Cui-Ying; Xu, Hong; Lei, Hui-Fen; Liu, Juan; Li, Xiao-Wei

2017-08-01

To explore the method of Gel card identifying ABO blood group, determine the inconsistent cause and the distribution of disease affecting factors, and put forward a method of its solutions. To collect 240 positive and negative typing-discordant blood speciments from patients examined by Gel card and send these speciments to blood type reference laboratory for examining with the classic tube method and serological test, such as salivary blood-group substance, in order to performe genotyping method when serologic test can not be determined. Among 240 positive and negative typing-discordant blood speciments from patients examined by Gel card, 107 blood speciments were positive and negative consistent examined by false agglutination test (44.58%), 133 blood specinents were discordent examined by false agglutination (55.42%), out of them, 35 cases (14.58%) with inconsistent cold agglutination test, 22 cases (9.17%) with weakened AB antigenicity, 16 cases (6.67%) with ABO subtyping, 12 cases (5.00%) with positive direct antiglobulin test, 11 cases (4.58%) with reduced or without antibodies, 11 cases (4.58%) with false aggregation caused by drugs or protein, 11 cases (4.58%) with salivary blood-type substances, 8 cases (3.33%) with non-ABO alloantibody, and 7 cases (2.92%) with allogeneic bone marrow transplantation. The distribution of disease were following: blood disease (16.83%), tumor (11.88%), and cardiopulmonary diseases (11.39%); chi-square test results indicated that the distribution significantly different. The analysis of ABO blood grouping shows a variety factors influencing positive and negative blood typing, and the Gel Card identification can produc more false positive blood types. Therefore, more attention should be paid on the high incidence diseases, such as blood disease, tumor, and cardiopulmonary disease.

Lack of active follow-up of cancer patients in Chennai, India: implications for population-based survival estimates

PubMed Central

Rama, Ranganathan; Shanta, Viswanathan

2008-01-01

Abstract Objective To measure the bias in absolute cancer survival estimates in the absence of active follow-up of cancer patients in developing countries. Methods Included in the study were all incident cases of the 10 most common cancers and corresponding subtypes plus all tobacco-related cancers not ranked among the top 10 that were registered in the population-based cancer registry in Chennai, India, during 1990–1999 and followed through 2001. Registered incident cases were first matched with those in the all-cause mortality database from the vital statistics division of the Corporation of Chennai. Unmatched incident cancer cases were then actively followed up to determine their survival status. Absolute survival was estimated by using an actuarial method and applying different assumptions regarding the survival status (alive/dead) of cases under passive and active follow-up. Findings Before active follow-up, matches between cases ranged from 20% to 66%, depending on the site of the primary tumour. Active follow-up of unmatched incident cases revealed that 15% to 43% had died by the end of the follow-up period, while the survival status of 4% to 38% remained unknown. Before active follow-up of cancer patients, 5-year absolute survival was estimated to be between 22% and 47% higher, than when conventional actuarial assumption methods were applied to cases that were lost to follow-up. The smallest survival estimates were obtained when cases lost to follow-up were excluded from the analysis. Conclusion Under the conditions that prevail in India and other developing countries, active follow-up of cancer patients yields the most reliable estimates of cancer survival rates. Passive case follow-up alone or applying standard methods to estimate survival is likely to result in an upward bias. PMID:18670662

Improving the performance of lesion-based computer-aided detection schemes of breast masses using a case-based adaptive cueing method

NASA Astrophysics Data System (ADS)

Tan, Maxine; Aghaei, Faranak; Wang, Yunzhi; Qian, Wei; Zheng, Bin

2016-03-01

Current commercialized CAD schemes have high false-positive (FP) detection rates and also have high correlations in positive lesion detection with radiologists. Thus, we recently investigated a new approach to improve the efficacy of applying CAD to assist radiologists in reading and interpreting screening mammograms. Namely, we developed a new global feature based CAD approach/scheme that can cue the warning sign on the cases with high risk of being positive. In this study, we investigate the possibility of fusing global feature or case-based scores with the local or lesion-based CAD scores using an adaptive cueing method. We hypothesize that the information from the global feature extraction (features extracted from the whole breast regions) are different from and can provide supplementary information to the locally-extracted features (computed from the segmented lesion regions only). On a large and diverse full-field digital mammography (FFDM) testing dataset with 785 cases (347 negative and 438 cancer cases with masses only), we ran our lesion-based and case-based CAD schemes "as is" on the whole dataset. To assess the supplementary information provided by the global features, we used an adaptive cueing method to adaptively adjust the original CAD-generated detection scores (Sorg) of a detected suspicious mass region based on the computed case-based score (Scase) of the case associated with this detected region. Using the adaptive cueing method, better sensitivity results were obtained at lower FP rates (<= 1 FP per image). Namely, increases of sensitivities (in the FROC curves) of up to 6.7% and 8.2% were obtained for the ROI and Case-based results, respectively.

Evaluation of three different methods of distance learning for postgraduate diagnostic imaging education: A pilot study.

PubMed

Poirier, Jean-Nicolas; Cooley, Jeffrey R; Wessely, Michelle; Guebert, Gary M; Petrocco-Napuli, Kristina

2014-10-01

Objective : The purpose of this study was to evaluate the perceived effectiveness and learning potential of 3 Web-based educational methods in a postgraduate radiology setting. Methods : Three chiropractic radiology faculty from diverse geographic locations led mini-courses using asynchronous discussion boards, synchronous Web conferencing, and asynchronous voice-over case presentations formatted for Web viewing. At the conclusion of each course, participants filled out a 14-question survey (using a 5-point Likert scale) designed to evaluate the effectiveness of each method in achieving specified course objectives and goals and their satisfaction when considering the learning potential of each method. The mean, standard deviation, and percentage agreements were tabulated. Results : Twenty, 15, and 10 participants completed the discussion board, Web conferencing, and case presentation surveys, respectively. All educational methods demonstrated a high level of agreement regarding the course objective (total mean rating >4.1). The case presentations had the highest overall rating for achieving the course goals; however, all but one method still had total mean ratings >4.0 and overall agreement levels of 70%-100%. The strongest potential for interactive learning was found with Web conferencing and discussion boards, while case presentations rated very low in this regard. Conclusions : The perceived effectiveness in achieving the course objective and goals was high for each method. Residency-based distance education may be a beneficial adjunct to current methods of training, allowing for international collaboration. When considering all aspects tested, there does not appear to be a clear advantage to any one method. Utilizing various methods may be most appropriate.

Pediatric Awake Craniotomy for Brain Lesions.

PubMed

Akay, Ali; Rükşen, Mete; Çetin, H Yurday; Seval, H Özer; İşlekel, Sertaç

2016-01-01

Awake craniotomy is a special method to prevent motor deficits during the resection of lesions that are located in, or close to, functional areas. Although it is more commonly performed in adult patients, reports of pediatric cases undergoing awake craniotomy are limited in the literature. In our clinic, where we frequently use awake craniotomy in adult patients, we performed this method in 2 selected pediatric cases for lesion surgery. At an early age, these 2 cases diagnosed with epilepsy presented cerebral lesions, but since the lesions enclosed functional areas, surgical resection was not regarded as a treatment option at this time. In these 2 pediatric cases, we successfully completed lesion surgery with awake craniotomy. The method and the techniques employed during surgery are presented concomitant with other reports in the literature. © 2016 S. Karger AG, Basel.

Impact of serology and molecular methods on improving the microbiologic diagnosis of infective endocarditis in Egypt.

PubMed

El-Kholy, Amany Aly; El-Rachidi, Nevine Gamal El-din; El-Enany, Mervat Gaber; AbdulRahman, Eiman Mohammed; Mohamed, Reem Mostafa; Rizk, Hussien Hasan

2015-10-01

Conventional diagnosis of infective endocarditis (IE) is based mainly on culture-dependent methods that may fail because of antibiotic therapy or fastidious microorganisms. We aimed to evaluate the added values of serological and molecular methods for diagnosis of infective endocarditis. One hundred and fifty-six cases of suspected endocarditis were enrolled in the study. For each patient, three sets of blood culture were withdrawn and serum sample was collected for Brucella, Bartonella and Coxiella burnetii antibody testing. Galactomannan antigen was added if fungal endocarditis was suspected. Broad range PCR targeting bacterial and fungal pathogens were done on blood culture bottles followed by sequencing. Culture and molecular studies were done on excised valve tissue when available. One hundred and thirty-two cases were diagnosed as definite IE. Causative organisms were detected by blood cultures in 40 (30.3 %) of cases. Blood culture-negative endocarditis (BCNE) represented 69.7 %. Of these cases, PCR followed by sequencing on blood and valvular tissue could diagnose five cases of Aspergillus flavus. Eleven patients with BCNE (8.3 %) were diagnosed as zoonotic endocarditis by serology and PCR including five cases of Brucella spp, four cases of Bartonella spp and two cases of Coxiella burnetii. PCR detected three cases of Brucella spp and two cases of Bartonella spp, while cases of Coxiella burnetii were PCR negative. The results of all diagnostic tools decreased the percentage of non-identified cases of BCNE from 69.7 to 49.2 %. Our data underline the role of serologic and molecular tools for the diagnosis of blood culture-negative endocarditis.

Semi-Lagrangian particle methods for high-dimensional Vlasov-Poisson systems

NASA Astrophysics Data System (ADS)

Cottet, Georges-Henri

2018-07-01

This paper deals with the implementation of high order semi-Lagrangian particle methods to handle high dimensional Vlasov-Poisson systems. It is based on recent developments in the numerical analysis of particle methods and the paper focuses on specific algorithmic features to handle large dimensions. The methods are tested with uniform particle distributions in particular against a recent multi-resolution wavelet based method on a 4D plasma instability case and a 6D gravitational case. Conservation properties, accuracy and computational costs are monitored. The excellent accuracy/cost trade-off shown by the method opens new perspective for accurate simulations of high dimensional kinetic equations by particle methods.

Non-invasive fetal sex determination by maternal plasma sequencing and application in X-linked disorder counseling.

PubMed

Pan, Xiaoyu; Zhang, Chunlei; Li, Xuchao; Chen, Shengpei; Ge, Huijuan; Zhang, Yanyan; Chen, Fang; Jiang, Hui; Jiang, Fuman; Zhang, Hongyun; Wang, Wei; Zhang, Xiuqing

2014-12-01

To develop a fetal sex determination method based on maternal plasma sequencing (MPS), assess its performance and potential use in X-linked disorder counseling. 900 cases of MPS data from a previous study were reviewed, in which 100 and 800 cases were used as training and validation set, respectively. The percentage of uniquely mapped sequencing reads on Y chromosome was calculated and used to classify male and female cases. Eight pregnant women who are carriers of Duchenne muscular dystrophy (DMD) mutations were recruited, whose plasma were subjected to multiplex sequencing and fetal sex determination analysis. In the training set, a sensitivity of 96% and false positive rate of 0% for male cases detection were reached in our method. The blinded validation results showed 421 in 423 male cases and 374 in 377 female cases were successfully identified, revealing sensitivity and specificity of 99.53% and 99.20% for fetal sex determination, at as early as 12 gestational weeks. Fetal sex for all eight DMD genetic counseling cases were correctly identified, which were confirmed by amniocentesis. Based on MPS, high accuracy of non-invasive fetal sex determination can be achieved. This method can potentially be used for prenatal genetic counseling.

Rough case-based reasoning system for continues casting

NASA Astrophysics Data System (ADS)

Su, Wenbin; Lei, Zhufeng

2018-04-01

The continuous casting occupies a pivotal position in the iron and steel industry. The rough set theory and the CBR (case based reasoning, CBR) were combined in the research and implementation for the quality assurance of continuous casting billet to improve the efficiency and accuracy in determining the processing parameters. According to the continuous casting case, the object-oriented method was applied to express the continuous casting cases. The weights of the attributes were calculated by the algorithm which was based on the rough set theory and the retrieval mechanism for the continuous casting cases was designed. Some cases were adopted to test the retrieval mechanism, by analyzing the results, the law of the influence of the retrieval attributes on determining the processing parameters was revealed. A comprehensive evaluation model was established by using the attribute recognition theory. According to the features of the defects, different methods were adopted to describe the quality condition of the continuous casting billet. By using the system, the knowledge was not only inherited but also applied to adjust the processing parameters through the case based reasoning method as to assure the quality of the continuous casting and improve the intelligent level of the continuous casting.

Investigation of misfiled cases in the PACS environment and a solution to prevent filing errors for chest radiographs.

PubMed

Morishita, Junji; Watanabe, Hideyuki; Katsuragawa, Shigehiko; Oda, Nobuhiro; Sukenobu, Yoshiharu; Okazaki, Hiroko; Nakata, Hajime; Doi, Kunio

2005-01-01

The aim of the study was to survey misfiled cases in a picture archiving and communication system environment at two hospitals and to demonstrate the potential usefulness of an automated patient recognition method for posteroanterior chest radiographs based on a template-matching technique designed to prevent filing errors. We surveyed misfiled cases obtained from different modalities in one hospital for 25 months, and misfiled cases of chest radiographs in another hospital for 17 months. For investigating the usefulness of an automated patient recognition and identification method for chest radiographs, a prospective study has been completed in clinical settings at the latter hospital. The total numbers of misfiled cases for different modalities in one hospital and for chest radiographs in another hospital were 327 and 22, respectively. The misfiled cases in the two hospitals were mainly the result of human errors (eg, incorrect manual entries of patient information, incorrect usage of identification cards in which an identification card for the previous patient was used for the next patient's image acquisition). The prospective study indicated the usefulness of the computerized method for discovering misfiled cases with a high performance (ie, an 86.4% correct warning rate for different patients and 1.5% incorrect warning rate for the same patients). We confirmed the occurrence of misfiled cases in the two hospitals. The automated patient recognition and identification method for chest radiographs would be useful in preventing wrong images from being stored in the picture archiving and communication system environment.

Combining matched and unmatched control groups in case-control studies.

PubMed

le Cessie, Saskia; Nagelkerke, Nico; Rosendaal, Frits R; van Stralen, Karlijn J; Pomp, Elisabeth R; van Houwelingen, Hans C

2008-11-15

Multiple control groups in case-control studies are used to control for different sources of confounding. For example, cases can be contrasted with matched controls to adjust for multiple genetic or unknown lifestyle factors and simultaneously contrasted with an unmatched population-based control group. Inclusion of different control groups for a single exposure analysis yields several estimates of the odds ratio, all using only part of the data. Here the authors introduce an easy way to combine odds ratios from several case-control analyses with the same cases. The approach is based upon methods used for meta-analysis but takes into account the fact that the same cases are used and that the estimated odds ratios are therefore correlated. Two ways of estimating this correlation are discussed: sandwich methodology and the bootstrap. Confidence intervals for the pooled estimates and a test for checking whether the odds ratios in the separate case-control studies differ significantly are derived. The performance of the method is studied by simulation and by applying the methods to a large study on risk factors for thrombosis, the MEGA Study (1999-2004), wherein cases with first venous thrombosis were included with a matched control group of partners and an unmatched population-based control group.

Investigation of a national outbreak of STEC Escherichia coli O157 using online consumer panel control methods: Great Britain, October 2014.

PubMed

Sinclair, C; Jenkins, C; Warburton, F; Adak, G K; Harris, J P

2017-04-01

In October 2014, Public Health England (PHE) identified cases of Shiga toxin-producing Escherichia coli (STEC) serogroup O157 sharing a multiple locus variable-number tandem repeat analysis (MLVA) profile. We conducted a case-control study using multivariable logistic regression to calculate adjusted odds ratios (aOR) and 95% confidence intervals (CI) testing a range of exposures. Cases were defined as laboratory-confirmed STEC O157 with the implicated MLVA profile, were UK residents aged ⩾18 years with symptom onset between 25 September and 30 October 2014, and had no history of travel abroad within 5 days of symptom onset. One hundred and two cases were identified. Cases were mostly female (65%; median age 49, range 2-92 years). It was the second largest outbreak seen in England, to date, and a case-control study was conducted using market research panel controls and online survey methods. These methods were instrumental in the rapid data collection and analysis necessary to allow traceback investigations for short shelf-life products. This is a new method of control recruitment and this is the first in which it was a standalone recruitment method. The case-control study suggested a strong association between consumption of a ready-to-eat food and disease (aOR 28, 95% CI 5·0-157) from one retailer. No reactive microbiological testing of food items during the outbreak was possible due to the short shelf-life of the product. Collaboration with industrial bodies is needed to ensure timely traceback exercises to identify contamination events and initiate appropriate and focused microbiological testing and implement control measures.

CASE STUDY CRITIQUE; UPPER CLINCH CASE STUDY

EPA Science Inventory

Case study critique: Upper Clinch case study (from Research on Methods for Integrating Ecological Economics and Ecological Risk Assessment: A Trade-off Weighted Index Approach to Integrating Economics and Ecological Risk Assessment). This critique answers the questions: 1) does ...

“Wish You Were Here”: Examining Characteristics, Outcomes, and Statistical Solutions for Missing Cases in Web-Based Psychotherapeutic Trials

PubMed Central

Dear, Blake F; Heller, Gillian Z; Crane, Monique F; Titov, Nickolai

2018-01-01

Background Missing cases following treatment are common in Web-based psychotherapy trials. Without the ability to directly measure and evaluate the outcomes for missing cases, the ability to measure and evaluate the effects of treatment is challenging. Although common, little is known about the characteristics of Web-based psychotherapy participants who present as missing cases, their likely clinical outcomes, or the suitability of different statistical assumptions that can characterize missing cases. Objective Using a large sample of individuals who underwent Web-based psychotherapy for depressive symptoms (n=820), the aim of this study was to explore the characteristics of cases who present as missing cases at posttreatment (n=138), their likely treatment outcomes, and compare between statistical methods for replacing their missing data. Methods First, common participant and treatment features were tested through binary logistic regression models, evaluating the ability to predict missing cases. Second, the same variables were screened for their ability to increase or impede the rate symptom change that was observed following treatment. Third, using recontacted cases at 3-month follow-up to proximally represent missing cases outcomes following treatment, various simulated replacement scores were compared and evaluated against observed clinical follow-up scores. Results Missing cases were dominantly predicted by lower treatment adherence and increased symptoms at pretreatment. Statistical methods that ignored these characteristics can overlook an important clinical phenomenon and consequently produce inaccurate replacement outcomes, with symptoms estimates that can swing from −32% to 70% from the observed outcomes of recontacted cases. In contrast, longitudinal statistical methods that adjusted their estimates for missing cases outcomes by treatment adherence rates and baseline symptoms scores resulted in minimal measurement bias (<8%). Conclusions Certain variables can characterize and predict missing cases likelihood and jointly predict lesser clinical improvement. Under such circumstances, individuals with potentially worst off treatment outcomes can become concealed, and failure to adjust for this can lead to substantial clinical measurement bias. Together, this preliminary research suggests that missing cases in Web-based psychotherapeutic interventions may not occur as random events and can be systematically predicted. Critically, at the same time, missing cases may experience outcomes that are distinct and important for a complete understanding of the treatment effect. PMID:29674311

Recent actuality about Bacillus cereus and human milk bank: a new sensitive method for microbiological analysis of pasteurized milk.

PubMed

Rigourd, V; Barnier, J P; Ferroni, A; Nicloux, M; Hachem, T; Magny, J F; Lapillonne, A; Frange, P; Nassif, X; Bille, E

2018-05-03

Three cases of Bacillus cereus infection or colonization occurred in the same region in France, and milk from the milk bank was suspected as a possible common source of contamination. All Batches delivered to the three cases complied with the requirements of the bacteriological reference method recommended by good practices guidelines. Still, a retrospective analysis with a more sensitive method showed one batch to contain B. cereus, however straincomparison revealed no epidemiological link betweenisolates from patients and those from the milk. Consequently, in accordance with the precautionary principle, we developed a new sensitive method for the screening of pasteurized milk for pathogenic bacteria. From January 1 to August 31, 2017, 2526 samples of pasteurized milk were prospectively included in the study. We showed that a 20 mL sample of pasteurized milk incubated for 18 h at 37 °C under aerobic conditions was favoring the detection of B. Cereus. The nonconformity rate was 6.3% for the reference method and 12.6% for the improved method (p < 0.0001). Nonconformity was due to the presence of B. cereus in 88.5% of cases for the improved method and 53% of cases for the reference method (p < 0.0001). Thus our new method is improves the microbiological safety of the product distributed and only moderately increases the rate of bacteriological nonconformity .

Rectal temperature-based death time estimation in infants.

PubMed

Igari, Yui; Hosokai, Yoshiyuki; Funayama, Masato

2016-03-01

In determining the time of death in infants based on rectal temperature, the same methods used in adults are generally used. However, whether the methods for adults are suitable for infants is unclear. In this study, we examined the following 3 methods in 20 infant death cases: computer simulation of rectal temperature based on the infinite cylinder model (Ohno's method), computer-based double exponential approximation based on Marshall and Hoare's double exponential model with Henssge's parameter determination (Henssge's method), and computer-based collinear approximation based on extrapolation of the rectal temperature curve (collinear approximation). The interval between the last time the infant was seen alive and the time that he/she was found dead was defined as the death time interval and compared with the estimated time of death. In Ohno's method, 7 cases were within the death time interval, and the average deviation in the other 12 cases was approximately 80 min. The results of both Henssge's method and collinear approximation were apparently inferior to the results of Ohno's method. The corrective factor was set within the range of 0.7-1.3 in Henssge's method, and a modified program was newly developed to make it possible to change the corrective factors. Modification A, in which the upper limit of the corrective factor range was set as the maximum value in each body weight, produced the best results: 8 cases were within the death time interval, and the average deviation in the other 12 cases was approximately 80min. There was a possibility that the influence of thermal isolation on the actual infants was stronger than that previously shown by Henssge. We conclude that Ohno's method and Modification A are useful for death time estimation in infants. However, it is important to accept the estimated time of death with certain latitude considering other circumstances. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Teaching Enzymes to Pre-Service Science Teachers through POE (Predict, Observe, Explain) Method: The Case of Catalase

ERIC Educational Resources Information Center

Güngör, Sema Nur; Özkan, Muhlis

2016-01-01

The aim of this study is to teach enzymes, which are one of the biology subjects in understanding which students have a big difficulty, to pre-service teachers through POE method in the case of catalase, which is an oxidoreductase. Descriptive analysis method was employed in this study in which 38 second grade pre-service teachers attending Uludag…

A Study of the Effectiveness of the Case Method in Teaching Interpersonal Relations to Psychiatric Aides. League Exchange No. 69.

ERIC Educational Resources Information Center

Swatsley, Dolores E.

In a 950-bed state psychiatric hospital, primarily an admission-and-treatment center, the case method was compared with the lecture-discussion method in teaching a unit on interpersonal relations with psychiatric patients to nurse aides. Two groups of 10 aides each were equated for age, sex, formal education, previous inservice training, and…

Formal functional test designs with a test representation language

NASA Technical Reports Server (NTRS)

Hops, J. M.

1993-01-01

The application of the category-partition method to the test design phase of hardware, software, or system test development is discussed. The method provides a formal framework for reducing the total number of possible test cases to a minimum logical subset for effective testing. An automatic tool and a formal language were developed to implement the method and produce the specification of test cases.

Case Studies for School Administrators: Managing Change in Education.

ERIC Educational Resources Information Center

Benham, Maenette K. P. Ah Nee

This book examines case-based learning in educational leadership courses, discusses case-based learning as an educational tool, exemplifies methods of writing a case study, and contains 14 case-studies by teachers and administrators. "Stakeholders in a House of Cards," by Audrey Burgher, discusses integrating technology with innovation.…

Finite elements and finite differences for transonic flow calculations

NASA Technical Reports Server (NTRS)

Hafez, M. M.; Murman, E. M.; Wellford, L. C.

1978-01-01

The paper reviews the chief finite difference and finite element techniques used for numerical solution of nonlinear mixed elliptic-hyperbolic equations governing transonic flow. The forms of the governing equations for unsteady two-dimensional transonic flow considered are the Euler equation, the full potential equation in both conservative and nonconservative form, the transonic small-disturbance equation in both conservative and nonconservative form, and the hodograph equations for the small-disturbance case and the full-potential case. Finite difference methods considered include time-dependent methods, relaxation methods, semidirect methods, and hybrid methods. Finite element methods include finite element Lax-Wendroff schemes, implicit Galerkin method, mixed variational principles, dual iterative procedures, optimal control methods and least squares.

Herbalife hepatotoxicity: Evaluation of cases with positive reexposure tests.

PubMed

Teschke, Rolf; Frenzel, Christian; Schulze, Johannes; Schwarzenboeck, Alexander; Eickhoff, Axel

2013-07-27

To analyze the validity of applied test criteria and causality assessment methods in assumed Herbalife hepatotoxicity with positive reexposure tests. We searched the Medline database for suspected cases of Herbalife hepatotoxicity and retrieved 53 cases including eight cases with a positive unintentional reexposure and a high causality level for Herbalife. First, analysis of these eight cases focused on the data quality of the positive reexposure cases, requiring a baseline value of alanine aminotransferase (ALT) < 5 upper limit of normal (N) before reexposure, with N as the upper limit of normal, and a doubling of the ALT value at reexposure as compared to the ALT value at baseline prior to reexposure. Second, reported methods to assess causality in the eight cases were evaluated, and then the liver specific Council for International Organizations of Medical Sciences (CIOMS) scale validated for hepatotoxicity cases was used for quantitative causality reevaluation. This scale consists of various specific elements with scores provided through the respective case data, and the sum of the scores yields a causality grading for each individual case of initially suspected hepatotoxicity. Details of positive reexposure test conditions and their individual results were scattered in virtually all cases, since reexposures were unintentional and allowed only retrospective rather than prospective assessments. In 1/8 cases, criteria for a positive reexposure were fulfilled, whereas in the remaining cases the reexposure test was classified as negative (n = 1), or the data were considered as uninterpretable due to missing information to comply adequately with the criteria (n = 6). In virtually all assessed cases, liver unspecific causality assessment methods were applied rather than a liver specific method such as the CIOMS scale. Using this scale, causality gradings for Herbalife in these eight cases were probable (n = 1), unlikely (n = 4), and excluded (n = 3). Confounding variables included low data quality, alternative diagnoses, poor exclusion of important other causes, and comedication by drugs and herbs in 6/8 cases. More specifically, problems were evident in some cases regarding temporal association, daily doses, exact start and end dates of product use, actual data of laboratory parameters such as ALT, and exact dechallenge characteristics. Shortcomings included scattered exclusion of hepatitis A-C, cytomegalovirus and Epstein Barr virus infection with only globally presented or lacking parameters. Hepatitis E virus infection was considered in one single patient and found positive, infections by herpes simplex virus and varicella zoster virus were excluded in none. Only one case fulfilled positive reexposure test criteria in initially assumed Herbalife hepatotoxicity, with lower CIOMS based causality gradings for the other cases than hitherto proposed.

In Case You Teach English: Case Studies in the English Classroom.

ERIC Educational Resources Information Center

Johannessen, Larry R.

Case studies can be a powerful strategy to use for helping students learn critical thinking processes that are key to interpreting and responding to literature and writing. Some of the major benefits of applying case methods are: cases provide an environment for active learning; they encourage the creation of a community of learners; cases help…

Recursive least squares method of regression coefficients estimation as a special case of Kalman filter

NASA Astrophysics Data System (ADS)

Borodachev, S. M.

2016-06-01

The simple derivation of recursive least squares (RLS) method equations is given as special case of Kalman filter estimation of a constant system state under changing observation conditions. A numerical example illustrates application of RLS to multicollinearity problem.

Customer-Focused Business Practice Adoption: A Comparison of Private and Public Sector Implementations

DTIC Science & Technology

2004-03-01

Narratives Phenomenologies Ethnographies Grounded Theory Case Studies Mixed Methods Sequential Concurrent Transformative Creswell... ethnographies , grounded theory studies and case studies (Creswell, 2003:18). The methods used in qualitative study provide the framework for...Definition Grounded theory provides a structured

A generalized least squares regression approach for computing effect sizes in single-case research: application examples.

PubMed

Maggin, Daniel M; Swaminathan, Hariharan; Rogers, Helen J; O'Keeffe, Breda V; Sugai, George; Horner, Robert H

2011-06-01

A new method for deriving effect sizes from single-case designs is proposed. The strategy is applicable to small-sample time-series data with autoregressive errors. The method uses Generalized Least Squares (GLS) to model the autocorrelation of the data and estimate regression parameters to produce an effect size that represents the magnitude of treatment effect from baseline to treatment phases in standard deviation units. In this paper, the method is applied to two published examples using common single case designs (i.e., withdrawal and multiple-baseline). The results from these studies are described, and the method is compared to ten desirable criteria for single-case effect sizes. Based on the results of this application, we conclude with observations about the use of GLS as a support to visual analysis, provide recommendations for future research, and describe implications for practice. Copyright © 2011 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Whole lot of parts: stress in extreme environments.

PubMed

Steel, G Daniel

2005-06-01

Stress has been a central interest for researchers of human behavior in extreme and unusual environments and also for those who are responsible for planning and carrying out expeditions involving such environments. This paper compares the actuarial and case study methods for predicting reactions to stress. Actuarial studies are useful, but do not tap enough variables to allow us to predict how a specific individual will cope with the rigors of an individual mission. Case histories provide a wealth of detail, but few investigators understand the challenges of properly applying this method. This study reviews some of the strengths and weaknesses of the actuarial and case history methods, and presents a four celled taxonomy of stress based on method (actuarial and case history) and effects (distress and eustress). For both research and operational purposes, the person, the setting, and time should not be considered independently; rather, it is an amalgam of these variables that provides the proper basis of analysis.

Scientists' attitudes on science and values: Case studies and survey methods in philosophy of science.

PubMed

Steel, Daniel; Gonnerman, Chad; O'Rourke, Michael

2017-06-01

This article examines the relevance of survey data of scientists' attitudes about science and values to case studies in philosophy of science. We describe two methodological challenges confronting such case studies: 1) small samples, and 2) potential for bias in selection, emphasis, and interpretation. Examples are given to illustrate that these challenges can arise for case studies in the science and values literature. We propose that these challenges can be mitigated through an approach in which case studies and survey methods are viewed as complementary, and use data from the Toolbox Dialogue Initiative to illustrate this claim. Copyright © 2017 Elsevier Ltd. All rights reserved.

Microtunneling systems and methods of use

DOEpatents

Richardson, John G.; Kostelnik, Kevin M.; Nickelson, Reva A.; Sloan, Paul A.

2006-07-04

A tunneling system including a tunneling apparatus including a cutting structure for forming a borehole and at least one linkage section for transmitting a force generally toward the cutting structure is disclosed. A method of disposing a casing string within a subterranean formation by applying a force generally to the trailing end of the tunneling apparatus, generally toward the leading end thereof, but without transmitting the entire force through the entire casing string is also disclosed. At least one linkage section extending within but not in contact with at least one casing section of the casing string may transmit the force. Also, a force limiting member may limit a force applied to the casing string.

Practical dose point-based methods to characterize dose distribution in a stationary elliptical body phantom for a cone-beam C-arm CT system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Jang-Hwan, E-mail: jhchoi21@stanford.edu; Constantin, Dragos; Ganguly, Arundhuti

2015-08-15

Purpose: To propose new dose point measurement-based metrics to characterize the dose distributions and the mean dose from a single partial rotation of an automatic exposure control-enabled, C-arm-based, wide cone angle computed tomography system over a stationary, large, body-shaped phantom. Methods: A small 0.6 cm{sup 3} ion chamber (IC) was used to measure the radiation dose in an elliptical body-shaped phantom made of tissue-equivalent material. The IC was placed at 23 well-distributed holes in the central and peripheral regions of the phantom and dose was recorded for six acquisition protocols with different combinations of minimum kVp (109 and 125 kVp)more » and z-collimator aperture (full: 22.2 cm; medium: 14.0 cm; small: 8.4 cm). Monte Carlo (MC) simulations were carried out to generate complete 2D dose distributions in the central plane (z = 0). The MC model was validated at the 23 dose points against IC experimental data. The planar dose distributions were then estimated using subsets of the point dose measurements using two proposed methods: (1) the proximity-based weighting method (method 1) and (2) the dose point surface fitting method (method 2). Twenty-eight different dose point distributions with six different point number cases (4, 5, 6, 7, 14, and 23 dose points) were evaluated to determine the optimal number of dose points and their placement in the phantom. The performances of the methods were determined by comparing their results with those of the validated MC simulations. The performances of the methods in the presence of measurement uncertainties were evaluated. Results: The 5-, 6-, and 7-point cases had differences below 2%, ranging from 1.0% to 1.7% for both methods, which is a performance comparable to that of the methods with a relatively large number of points, i.e., the 14- and 23-point cases. However, with the 4-point case, the performances of the two methods decreased sharply. Among the 4-, 5-, 6-, and 7-point cases, the 7-point case (1.0% [±0.6%] difference) and the 6-point case (0.7% [±0.6%] difference) performed best for method 1 and method 2, respectively. Moreover, method 2 demonstrated high-fidelity surface reconstruction with as few as 5 points, showing pixelwise absolute differences of 3.80 mGy (±0.32 mGy). Although the performance was shown to be sensitive to the phantom displacement from the isocenter, the performance changed by less than 2% for shifts up to 2 cm in the x- and y-axes in the central phantom plane. Conclusions: With as few as five points, method 1 and method 2 were able to compute the mean dose with reasonable accuracy, demonstrating differences of 1.7% (±1.2%) and 1.3% (±1.0%), respectively. A larger number of points do not necessarily guarantee better performance of the methods; optimal choice of point placement is necessary. The performance of the methods is sensitive to the alignment of the center of the body phantom relative to the isocenter. In body applications where dose distributions are important, method 2 is a better choice than method 1, as it reconstructs the dose surface with high fidelity, using as few as five points.« less

A Three-Dimensional Target Depth-Resolution Method with a Single-Vector Sensor

PubMed Central

Zhao, Anbang; Bi, Xuejie; Hui, Juan; Zeng, Caigao; Ma, Lin

2018-01-01

This paper mainly studies and verifies the target number category-resolution method in multi-target cases and the target depth-resolution method of aerial targets. Firstly, target depth resolution is performed by using the sign distribution of the reactive component of the vertical complex acoustic intensity; the target category and the number resolution in multi-target cases is realized with a combination of the bearing-time recording information; and the corresponding simulation verification is carried out. The algorithm proposed in this paper can distinguish between the single-target multi-line spectrum case and the multi-target multi-line spectrum case. This paper presents an improved azimuth-estimation method for multi-target cases, which makes the estimation results more accurate. Using the Monte Carlo simulation, the feasibility of the proposed target number and category-resolution algorithm in multi-target cases is verified. In addition, by studying the field characteristics of the aerial and surface targets, the simulation results verify that there is only amplitude difference between the aerial target field and the surface target field under the same environmental parameters, and an aerial target can be treated as a special case of a surface target; the aerial target category resolution can then be realized based on the sign distribution of the reactive component of the vertical acoustic intensity so as to realize three-dimensional target depth resolution. By processing data from a sea experiment, the feasibility of the proposed aerial target three-dimensional depth-resolution algorithm is verified. PMID:29649173

A Three-Dimensional Target Depth-Resolution Method with a Single-Vector Sensor.

PubMed

Zhao, Anbang; Bi, Xuejie; Hui, Juan; Zeng, Caigao; Ma, Lin

2018-04-12

This paper mainly studies and verifies the target number category-resolution method in multi-target cases and the target depth-resolution method of aerial targets. Firstly, target depth resolution is performed by using the sign distribution of the reactive component of the vertical complex acoustic intensity; the target category and the number resolution in multi-target cases is realized with a combination of the bearing-time recording information; and the corresponding simulation verification is carried out. The algorithm proposed in this paper can distinguish between the single-target multi-line spectrum case and the multi-target multi-line spectrum case. This paper presents an improved azimuth-estimation method for multi-target cases, which makes the estimation results more accurate. Using the Monte Carlo simulation, the feasibility of the proposed target number and category-resolution algorithm in multi-target cases is verified. In addition, by studying the field characteristics of the aerial and surface targets, the simulation results verify that there is only amplitude difference between the aerial target field and the surface target field under the same environmental parameters, and an aerial target can be treated as a special case of a surface target; the aerial target category resolution can then be realized based on the sign distribution of the reactive component of the vertical acoustic intensity so as to realize three-dimensional target depth resolution. By processing data from a sea experiment, the feasibility of the proposed aerial target three-dimensional depth-resolution algorithm is verified.

Case Study Teaching Method Improves Student Performance and Perceptions of Learning Gains†

PubMed Central

Bonney, Kevin M.

2015-01-01

Following years of widespread use in business and medical education, the case study teaching method is becoming an increasingly common teaching strategy in science education. However, the current body of research provides limited evidence that the use of published case studies effectively promotes the fulfillment of specific learning objectives integral to many biology courses. This study tested the hypothesis that case studies are more effective than classroom discussions and textbook reading at promoting learning of key biological concepts, development of written and oral communication skills, and comprehension of the relevance of biological concepts to everyday life. This study also tested the hypothesis that case studies produced by the instructor of a course are more effective at promoting learning than those produced by unaffiliated instructors. Additionally, performance on quantitative learning assessments and student perceptions of learning gains were analyzed to determine whether reported perceptions of learning gains accurately reflect academic performance. The results reported here suggest that case studies, regardless of the source, are significantly more effective than other methods of content delivery at increasing performance on examination questions related to chemical bonds, osmosis and diffusion, mitosis and meiosis, and DNA structure and replication. This finding was positively correlated to increased student perceptions of learning gains associated with oral and written communication skills and the ability to recognize connections between biological concepts and other aspects of life. Based on these findings, case studies should be considered as a preferred method for teaching about a variety of concepts in science courses. PMID:25949753

Case study teaching method improves student performance and perceptions of learning gains.

PubMed

Bonney, Kevin M

2015-05-01

Following years of widespread use in business and medical education, the case study teaching method is becoming an increasingly common teaching strategy in science education. However, the current body of research provides limited evidence that the use of published case studies effectively promotes the fulfillment of specific learning objectives integral to many biology courses. This study tested the hypothesis that case studies are more effective than classroom discussions and textbook reading at promoting learning of key biological concepts, development of written and oral communication skills, and comprehension of the relevance of biological concepts to everyday life. This study also tested the hypothesis that case studies produced by the instructor of a course are more effective at promoting learning than those produced by unaffiliated instructors. Additionally, performance on quantitative learning assessments and student perceptions of learning gains were analyzed to determine whether reported perceptions of learning gains accurately reflect academic performance. The results reported here suggest that case studies, regardless of the source, are significantly more effective than other methods of content delivery at increasing performance on examination questions related to chemical bonds, osmosis and diffusion, mitosis and meiosis, and DNA structure and replication. This finding was positively correlated to increased student perceptions of learning gains associated with oral and written communication skills and the ability to recognize connections between biological concepts and other aspects of life. Based on these findings, case studies should be considered as a preferred method for teaching about a variety of concepts in science courses.

A Proposed Resident's Operative Case Tracking and Evaluation System.

PubMed

Sehli, Deema N; Esene, Ignatius N; Baeesa, Saleh S

2016-03-01

Neurosurgery program trainers are continuously searching for new methods to evaluate trainees' competency besides number of cases and training duration. Recently, efforts are made on the development of reliable methods to teach competency and valid methods to measure teaching efficacy. Herein, we propose the "Resident's Operative Case Tracking and Evaluation System" (ROCTES) for the assessment and monitoring of the resident's performance quality during each procedure. We developed a data-based website and smartphone application for neurosurgical attending physicians, residents, and resident review committees in our accredited neurosurgical institutions. ROCTES runs through five steps: Login (Resident), Case Entry, Login (Attending Physician), Case Approval and Evaluation, and Report. The Resident enters each case record under "Case Entry" field and can "save," "edit," or "submit" the case data to the Attending Physician. The latter from the attending physician login profile will be able to "approve and evaluate" the resident's "knowledge," "skills," and "attitude" ranking from 1 to 15 for that particular case; add his comments and then "save," "edit," or "submit" the data, which can be viewed by users as a "report." Program Directors can also "login" to monitor the resident's progress. The implementation of this communication tool should enable the filtering and retrieval of information needed for the better assessment and monitoring of residents' exposure to variety of cases in each training center. This proposed evaluation system will provide a transparent assessment for residency training programs and should convert trainees into competent neurosurgeons. Copyright © 2016 Elsevier Inc. All rights reserved.

America’s last battles: Organizing brigades to win the peace lessons from East Timor, Afghanistan, and Iraq

DTIC Science & Technology

2004-06-17

Graduate Degree Programs Robert F. Baumann, Ph.D. The opinions and conclusions expressed herein are those of the student author and do not...primary research method this study will follow is the case study method as outlined in Robert K. Yin’s, Case Study Research: Design and Methods. By using...The method is also policy relevant as it generates lessons relevant to different situations. In Robert K. Yin’s words, “An important step . . . is the

Modeling Multibody Stage Separation Dynamics Using Constraint Force Equation Methodology

NASA Technical Reports Server (NTRS)

Tartabini, Paul V.; Roithmayr, Carlos M.; Toniolo, Matthew D.; Karlgaard, Christopher D.; Pamadi, Bandu N.

2011-01-01

This paper discusses the application of the constraint force equation methodology and its implementation for multibody separation problems using three specially designed test cases. The first test case involves two rigid bodies connected by a fixed joint, the second case involves two rigid bodies connected with a universal joint, and the third test case is that of Mach 7 separation of the X-43A vehicle. For the first two cases, the solutions obtained using the constraint force equation method compare well with those obtained using industry- standard benchmark codes. For the X-43A case, the constraint force equation solutions show reasonable agreement with the flight-test data. Use of the constraint force equation method facilitates the analysis of stage separation in end-to-end simulations of launch vehicle trajectories

[Proportion of breast cancer in women aged 50 to 69 years from Girona, Spain, according to detection method].

PubMed

Puig-Vives, Montse; Osca-Gelis, Gemma; Camprubí-Font, Carla; Vilardell, M Loreto; Izquierdo, Angel; Marcos-Gragera, Rafael

2014-10-07

The aim of this study was to determine the tumor stage, the proportion of cases and the age specific rate of breast cancer (BC) cases according to detection method. Cases of women aged 50 to 69 years diagnosed with BC in the Girona province during 1999-2006 were extracted from the population-based Girona Cancer Registry (n=1,254). BC was classified by detection method: screen-detected cancer, interval cancer and others. Proportion of cases and age-specific incidence were calculated according to detection method. During the period 2002-2006, the proportion of screen-detected cancers, interval cancers and other cancers were 42.2%, 5.8% and 52.2%, respectively. After implementation of the early detection of breast cancer program (PDPCM), the incidence of screen-detected cases raised; thereafter, interval cancers also increased and the rate of other cancers decreased. In the Girona province during the fully implemented PDPCM period (2002-2006), interval cancers represented a low proportion (5.8%) of women diagnosed with BC at 50 to 69 years old. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

Diagnostic performance of swab PCR as an alternative to tissue culture methods for diagnosing infections associated with fracture fixation devices.

PubMed

Omar, Mohamed; Suero, Eduardo M; Liodakis, Emmanouil; Reichling, Moritz; Guenther, Daniel; Decker, Sebastian; Stiesch, Meike; Krettek, Christian; Eberhard, Jörg

2016-07-01

Molecular procedures could potentially improve diagnoses of orthopaedic implant-related infections, but are not yet clinically implemented. Analysis of sonication fluid shows the highest sensitivity for diagnosing implant infections in cases of revision surgery with implant removal. However, there remains controversy regarding the best method for obtaining specimens in cases of revision surgery with implant retention. Tissue culture is the most common diagnostic method for pathogen identification in such cases. Here we aimed to assess the diagnostic performance of swab PCR analysis compared to tissue culture from patients undergoing revision surgery of fracture fixation devices. We prospectively investigated 62 consecutive subjects who underwent revision surgery of fracture fixation devices during a two-year period. Tissue samples were collected for cultures, and swabs from the implant surface were obtained for 16S rRNA PCR analysis. Subjects were classified as having an implant-related infection if (1) they presented with a sinus tract or open wound in communication with the implant; or (2) purulence was encountered intraoperatively; or (3) two out of three tissue cultures tested positive for the presence of the same pathogen. Tissue culture and swab PCR results from the subjects were used to calculate the sensitivity, specificity, accuracy, positive predictive value (PPV), negative predictive value (NPV), and area under the ROC curve (AUC) for identifying an orthopaedic implant-related infection. Orthopaedic implant-related infections were detected in 51 subjects. Tissue culture identified infections in 47 cases, and swab PCR in 35 cases. Among the 11 aseptic cases, tissue culture was positive in 2 cases and swab PCR in 4 cases. Tissue culture showed a significantly higher area under the ROC curve for diagnosing infection (AUC=0.89; 95% CI, 0.67-0.96) compared to swab PCR (AUC=0.66; 95% CI, 0.46-0.80) (p=0.033). Compared to swab PCR, tissue culture showed better performance for diagnosing orthopaedic implant-related infection. Although molecular methods are expected to yield higher diagnostic accuracy than cultures, it appears that the method of obtaining specimens plays an important role. Improved methods of specimen collection are required before swab PCR can become a reliable alternative to tissue-consumptive methods. Copyright © 2016 Elsevier Ltd. All rights reserved.

SU-F-E-15: Initial Experience Implementing a Case Method Teaching Approach to Radiation Oncology Physics Residents, Graduate Students and Doctorate of Medical Physics Students

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gutierrez, A

Purpose: Case Method Teaching approach is a teaching tool used commonly in business school to challenge students with real-world situations—i.e. cases. The students are placed in the role of the decision maker and have to provide a solution based on the multitude of information provided. Specifically, students must develop an ability to quickly make sense of a complex problem, provide a solution incorporating all of the objectives (at time conflicting) and constraints, and communicate that solution in a succinct, professional and effective manner. The validity of the solution is highly dependent on the auxiliary information provided in the case andmore » the basic didactic knowledge of the student. A Case Method Teaching approach was developed and implemented into an on-going course focused on AAPM Task Group reports at UTHSCSA. Methods: A current course at UTHSCSA reviews and discusses 15 AAPM Task Group reports per semester. The course is structured into three topic modules: Imaging QA, Stereotactic Radiotherapy, and Special Patient Measurements—i.e. pacemakers, fetal dose. After a topic module is complete, the students are divided into groups (2–3 people) and are asked to review a case study related to the module topic. Students then provide a solution presented in an executive summary and class presentation. Results: Case studies were created to address each module topic. Through team work and whole-class discussion, a collaborative learning environment was established. Students additionally learned concepts such vendor relations, financial negotiations, capital project management, and competitive strategy. Conclusion: Case Method Teaching approach is an effective teaching tool to further enhance the learning experience of radiation oncology physics students by presenting them with though-provoking dilemmas that require students to distinguish pertinent from peripheral information, formulate strategies and recommendations for action, and confront obstacles to implementation.« less

Developing an expert panel process to refine health outcome definitions in observational data.

PubMed

Fox, Brent I; Hollingsworth, Joshua C; Gray, Michael D; Hollingsworth, Michael L; Gao, Juan; Hansen, Richard A

2013-10-01

Drug safety surveillance using observational data requires valid adverse event, or health outcome of interest (HOI) measurement. The objectives of this study were to develop a method to review HOI definitions in claims databases using (1) web-based digital tools to present de-identified patient data, (2) a systematic expert panel review process, and (3) a data collection process enabling analysis of concepts-of-interest that influence panelists' determination of HOI. De-identified patient data were presented via an interactive web-based dashboard to enable case review and determine if specific HOIs were present or absent. Criteria for determining HOIs and their severity were provided to each panelist. Using a modified Delphi method, six panelist pairs independently reviewed approximately 200 cases across each of three HOIs (acute liver injury, acute kidney injury, and acute myocardial infarction) such that panelist pairs independently reviewed the same cases. Panelists completed an assessment within the dashboard for each case that included their assessment of the presence or absence of the HOI, HOI severity (if present), and data contributing to their decision. Discrepancies within panelist pairs were resolved during a consensus process. Dashboard development was iterative, focusing on data presentation and recording panelists' assessments. Panelists reported quickly learning how to use the dashboard. The assessment module was used consistently. The dashboard was reliable, enabling an efficient review process for panelists. Modifications were made to the dashboard and review process when necessary to facilitate case review. Our methods should be applied to other health outcomes of interest to further refine the dashboard and case review process. The expert review process was effective and was supported by the web-based dashboard. Our methods for case review and classification can be applied to future methods for case identification in observational data sources. Copyright © 2013 Elsevier Inc. All rights reserved.

Interference elimination in digital controllers of automation systems of oil and gas complex

NASA Astrophysics Data System (ADS)

Solomentsev, K. Yu; Fugarov, D. D.; Purchina, O. A.; Poluyan, A. Y.; Nesterchuk, V. V.; Petrenkova, S. B.

2018-05-01

The given article considers the problems arising in the process of digital governors development for the systems of automatic control. In the case of interference, and also in case of high frequency of digitization, digital differentiation gives a big error. The problem is that the derivative is calculated as the difference of two close variables. The method of differentiation is offered to reduce this error, when there is a case of averaging the difference quotient of the series of meanings. The structure chart for the implementation of this differentiation method is offered in the case of governors construction.

The Influence of Ballistic Damage on the Aeroelastic Characteristics of Lifting Surfaces.

DTIC Science & Technology

1979-07-01

the pressure distribution. The finite-element method, often referred to as a vortex- lattice or doublet- lattice method, divides the lifting surface into...finite-element modeling, such as doublet- lattice , would provide a better understanding of the near-field effects of a damage hole and allow a data base...0.17 0.33 0.50 6.67 0.833 1.00 Figure 42 125 CASE 5 and CASE 5D 0 Ye=.57 = UNDAMAGED M = DAMAGED 0 C3/ C22 CD QCD 6.330,4 0/ Fiue4 02 CASE 5 and CASE

Understanding What It Means for Assurance Cases to "Work"

NASA Technical Reports Server (NTRS)

Rinehart, David J.; Knight, John C.; Rowanhill, Jonathan

2017-01-01

This report is the result of our year-long investigation into assurance case practices and effectiveness. Assurance cases are a method for working toward acceptable critical system performance. They represent a significant thread of applied assurance methods extending back many decades and being employed in a range of industries and applications. Our research presented in this report includes a literature survey of over 50 sources and interviews with nearly a dozen practitioners in the field. We have organized our results into seven major claimed assurance case benefits and their supporting mechanisms, evidence, counter-evidence, and caveats.

Field-based random sampling without a sampling frame: control selection for a case-control study in rural Africa.

PubMed

Crampin, A C; Mwinuka, V; Malema, S S; Glynn, J R; Fine, P E

2001-01-01

Selection bias, particularly of controls, is common in case-control studies and may materially affect the results. Methods of control selection should be tailored both for the risk factors and disease under investigation and for the population being studied. We present here a control selection method devised for a case-control study of tuberculosis in rural Africa (Karonga, northern Malawi) that selects an age/sex frequency-matched random sample of the population, with a geographical distribution in proportion to the population density. We also present an audit of the selection process, and discuss the potential of this method in other settings.

A Solution Adaptive Technique Using Tetrahedral Unstructured Grids

NASA Technical Reports Server (NTRS)

Pirzadeh, Shahyar Z.

2000-01-01

An adaptive unstructured grid refinement technique has been developed and successfully applied to several three dimensional inviscid flow test cases. The method is based on a combination of surface mesh subdivision and local remeshing of the volume grid Simple functions of flow quantities are employed to detect dominant features of the flowfield The method is designed for modular coupling with various error/feature analyzers and flow solvers. Several steady-state, inviscid flow test cases are presented to demonstrate the applicability of the method for solving practical three-dimensional problems. In all cases, accurate solutions featuring complex, nonlinear flow phenomena such as shock waves and vortices have been generated automatically and efficiently.

Methods for calculating conjugate problems of heat transfer

NASA Astrophysics Data System (ADS)

Kalinin, E. K.; Dreitser, G. A.; Kostiuk, V. V.; Berlin, I. I.

Methods are examined for calculating various conjugate problems of heat transfer in channels and closed vessels in cases of single-phase and two-phase flow in steady and unsteady conditions. The single-phase-flow studies involve the investigation of gaseous and liquid heat-carriers in pipes, annular and plane channels, and pipe bundles in cases of cooling and heating. General relationships are presented for heat transfer in cases of film, transition, and nucleate boiling, as well as for boiling crises. Attention is given to methods for analyzing the filling and cooling of conduits and tanks by cryogenic liquids; and ways to intensify heat transfer in these conditions are examined.

Cost-sensitive case-based reasoning using a genetic algorithm: application to medical diagnosis.

PubMed

Park, Yoon-Joo; Chun, Se-Hak; Kim, Byung-Chun

2011-02-01

The paper studies the new learning technique called cost-sensitive case-based reasoning (CSCBR) incorporating unequal misclassification cost into CBR model. Conventional CBR is now considered as a suitable technique for diagnosis, prognosis and prescription in medicine. However it lacks the ability to reflect asymmetric misclassification and often assumes that the cost of a positive diagnosis (an illness) as a negative one (no illness) is the same with that of the opposite situation. Thus, the objective of this research is to overcome the limitation of conventional CBR and encourage applying CBR to many real world medical cases associated with costs of asymmetric misclassification errors. The main idea involves adjusting the optimal cut-off classification point for classifying the absence or presence of diseases and the cut-off distance point for selecting optimal neighbors within search spaces based on similarity distribution. These steps are dynamically adapted to new target cases using a genetic algorithm. We apply this proposed method to five real medical datasets and compare the results with two other cost-sensitive learning methods-C5.0 and CART. Our finding shows that the total misclassification cost of CSCBR is lower than other cost-sensitive methods in many cases. Even though the genetic algorithm has limitations in terms of unstable results and over-fitting training data, CSCBR results with GA are better overall than those of other methods. Also the paired t-test results indicate that the total misclassification cost of CSCBR is significantly less than C5.0 and CART for several datasets. We have proposed a new CBR method called cost-sensitive case-based reasoning (CSCBR) that can incorporate unequal misclassification costs into CBR and optimize the number of neighbors dynamically using a genetic algorithm. It is meaningful not only for introducing the concept of cost-sensitive learning to CBR, but also for encouraging the use of CBR in the medical area. The result shows that the total misclassification costs of CSCBR do not increase in arithmetic progression as the cost of false absence increases arithmetically, thus it is cost-sensitive. We also show that total misclassification costs of CSCBR are the lowest among all methods in four datasets out of five and the result is statistically significant in many cases. The limitation of our proposed CSCBR is confined to classify binary cases for minimizing misclassification cost because our proposed CSCBR is originally designed to classify binary case. Our future work extends this method for multi-classification which can classify more than two groups. Copyright © 2010 Elsevier B.V. All rights reserved.

New Computational Methods for the Prediction and Analysis of Helicopter Noise

NASA Technical Reports Server (NTRS)

Strawn, Roger C.; Oliker, Leonid; Biswas, Rupak

1996-01-01

This paper describes several new methods to predict and analyze rotorcraft noise. These methods are: 1) a combined computational fluid dynamics and Kirchhoff scheme for far-field noise predictions, 2) parallel computer implementation of the Kirchhoff integrations, 3) audio and visual rendering of the computed acoustic predictions over large far-field regions, and 4) acoustic tracebacks to the Kirchhoff surface to pinpoint the sources of the rotor noise. The paper describes each method and presents sample results for three test cases. The first case consists of in-plane high-speed impulsive noise and the other two cases show idealized parallel and oblique blade-vortex interactions. The computed results show good agreement with available experimental data but convey much more information about the far-field noise propagation. When taken together, these new analysis methods exploit the power of new computer technologies and offer the potential to significantly improve our prediction and understanding of rotorcraft noise.

Two-stage repair for severe proximal hypospadias using oral mucosal grafts: combination of a modified Bracka method and a modified Byars flap method.

PubMed

Mitsukawa, Nobuyuki; Saiga, Atsuomi; Akita, Shinsuke; Kubota, Yoshitaka; Kuriyama, Motone; Satoh, Kaneshige

2015-02-01

One-stage repair is a conventional treatment of hypospadias. If hypospadias is severe as in the scrotal type and perineal type, penile curvature sometimes cannot be corrected by dorsal midline plication alone. In addition to resection of the urethral plate, ventral grafting becomes necessary for insufficient skin and subcutaneous tissue. In recent years, there has been renewed interest in 2-stage repair for such severe cases and salvage of failed cases with scarring. In the present study, novel 2-stage urethroplasty was performed in 6 cases to repair severe proximal hypospadias which required resection of the urethral plate. This novel method consisted of a combination of a modified Bracka method using oral mucosal grafts and a modified Byars flap of the dorsal foreskin. Good results were obtained using this novel method.

A clustering method of Chinese medicine prescriptions based on modified firefly algorithm.

PubMed

Yuan, Feng; Liu, Hong; Chen, Shou-Qiang; Xu, Liang

2016-12-01

This paper is aimed to study the clustering method for Chinese medicine (CM) medical cases. The traditional K-means clustering algorithm had shortcomings such as dependence of results on the selection of initial value, trapping in local optimum when processing prescriptions form CM medical cases. Therefore, a new clustering method based on the collaboration of firefly algorithm and simulated annealing algorithm was proposed. This algorithm dynamically determined the iteration of firefly algorithm and simulates sampling of annealing algorithm by fitness changes, and increased the diversity of swarm through expansion of the scope of the sudden jump, thereby effectively avoiding premature problem. The results from confirmatory experiments for CM medical cases suggested that, comparing with traditional K-means clustering algorithms, this method was greatly improved in the individual diversity and the obtained clustering results, the computing results from this method had a certain reference value for cluster analysis on CM prescriptions.

The use of rapid review methods in health technology assessments: 3 case studies.

PubMed

Kaltenthaler, Eva; Cooper, Katy; Pandor, Abdullah; Martyn-St James, Marrissa; Chatters, Robin; Wong, Ruth

2016-08-26

Rapid reviews are of increasing importance within health technology assessment due to time and resource constraints. There are many rapid review methods available although there is little guidance as to the most suitable methods. We present three case studies employing differing methods to suit the evidence base for each review and outline some issues to consider when selecting an appropriate method. Three recently completed systematic review short reports produced for the UK National Institute for Health Research were examined. Different approaches to rapid review methods were used in the three reports which were undertaken to inform the commissioning of services within the NHS and to inform future trial design. We describe the methods used, the reasoning behind the choice of methods and explore the strengths and weaknesses of each method. Rapid review methods were chosen to meet the needs of the review and each review had distinctly different challenges such as heterogeneity in terms of populations, interventions, comparators and outcome measures (PICO) and/or large numbers of relevant trials. All reviews included at least 10 randomised controlled trials (RCTs), each with numerous included outcomes. For the first case study (sexual health interventions), very diverse studies in terms of PICO were included. P-values and summary information only were presented due to substantial heterogeneity between studies and outcomes measured. For the second case study (premature ejaculation treatments), there were over 100 RCTs but also several existing systematic reviews. Data for meta-analyses were extracted directly from existing systematic reviews with new RCT data added where available. For the final case study (cannabis cessation therapies), studies included a wide range of interventions and considerable variation in study populations and outcomes. A brief summary of the key findings for each study was presented and narrative synthesis used to summarise results for each pair of interventions compared. Rapid review methods need to be chosen to meet both the nature of the evidence base of a review and the challenges presented by the included studies. Appropriate methods should be chosen after an assessment of the evidence base.

Confidence Interval Coverage for Cohen's Effect Size Statistic

ERIC Educational Resources Information Center

Algina, James; Keselman, H. J.; Penfield, Randall D.

2006-01-01

Kelley compared three methods for setting a confidence interval (CI) around Cohen's standardized mean difference statistic: the noncentral-"t"-based, percentile (PERC) bootstrap, and biased-corrected and accelerated (BCA) bootstrap methods under three conditions of nonnormality, eight cases of sample size, and six cases of population…

Unplanned Complex Suicide-A Consideration of Multiple Methods.

PubMed

Ateriya, Navneet; Kanchan, Tanuj; Shekhawat, Raghvendra Singh; Setia, Puneet; Saraf, Ashish

2018-05-01

Detailed death investigations are mandatory to find out the exact cause and manner in non-natural deaths. In this reference, use of multiple methods in suicide poses a challenge for the investigators especially when the choice of methods to cause death is unplanned. There is an increased likelihood that doubts of homicide are raised in cases of unplanned complex suicides. A case of complex suicide is reported where the victim resorted to multiple methods to end his life, and what appeared to be an unplanned variant based on the death scene investigations. A meticulous crime scene examination, interviews of the victim's relatives and other witnesses, and a thorough autopsy are warranted to conclude on the cause and manner of death in all such cases. © 2017 American Academy of Forensic Sciences.

Teaching skills to resolve conflicts with acute confusional syndrome patients in nursing using the Case Method (CM).

PubMed

Arrue, Marta; Caballero, Silvia

2015-01-01

This study sets out to design and implement a teaching sequence that offers students the opportunity to acquire the necessary knowledge, skills, attitudes and values to deal with a confrontational patient. When designing the teaching methodology, we chose an active teaching strategy, commonly entitled the Case Method. The case was developed during the 2011-2012 academic year and implemented across the curriculum in the 2012-2013 academic year, in the "Relations and Communications in Nursing Care" and "Geriatric Nursing" subject modules, in the second year undergraduate nursing course at the University of the Basque Country. Implementation results indicate that the Case Method is a satisfactory tool to facilitate acquisition of the chosen skills, as well as being a learning method that is well received by students. At the end of the process, 72.8% of them shared the opinion that "this methodology has helped me more or much more than traditional 'chalk and talk' expository methodology". Moreover, 93% of the students successfully achieved at least the minimum learning results required. Nevertheless, students said that they felt overwhelmed on more than one occasion. The study has provided evidence that the Case Method contributes to acquiring skills that every nurse will need during their career. This should spur us on to continue extending the range of possibilities offered by active methodologies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Implementation of Data Mining to Analyze Drug Cases Using C4.5 Decision Tree

NASA Astrophysics Data System (ADS)

Wahyuni, Sri

2018-03-01

Data mining was the process of finding useful information from a large set of databases. One of the existing techniques in data mining was classification. The method used was decision tree method and algorithm used was C4.5 algorithm. The decision tree method was a method that transformed a very large fact into a decision tree which was presenting the rules. Decision tree method was useful for exploring data, as well as finding a hidden relationship between a number of potential input variables with a target variable. The decision tree of the C4.5 algorithm was constructed with several stages including the selection of attributes as roots, created a branch for each value and divided the case into the branch. These stages would be repeated for each branch until all the cases on the branch had the same class. From the solution of the decision tree there would be some rules of a case. In this case the researcher classified the data of prisoners at Labuhan Deli prison to know the factors of detainees committing criminal acts of drugs. By applying this C4.5 algorithm, then the knowledge was obtained as information to minimize the criminal acts of drugs. From the findings of the research, it was found that the most influential factor of the detainee committed the criminal act of drugs was from the address variable.

Feasibility study on the least square method for fitting non-Gaussian noise data

NASA Astrophysics Data System (ADS)

Xu, Wei; Chen, Wen; Liang, Yingjie

2018-02-01

This study is to investigate the feasibility of least square method in fitting non-Gaussian noise data. We add different levels of the two typical non-Gaussian noises, Lévy and stretched Gaussian noises, to exact value of the selected functions including linear equations, polynomial and exponential equations, and the maximum absolute and the mean square errors are calculated for the different cases. Lévy and stretched Gaussian distributions have many applications in fractional and fractal calculus. It is observed that the non-Gaussian noises are less accurately fitted than the Gaussian noise, but the stretched Gaussian cases appear to perform better than the Lévy noise cases. It is stressed that the least-squares method is inapplicable to the non-Gaussian noise cases when the noise level is larger than 5%.

Estimating the influenza vaccine effectiveness in elderly on a yearly basis using the Spanish influenza surveillance network--pilot case-control studies using different control groups, 2008-2009 season, Spain.

PubMed

Savulescu, Camelia; Valenciano, Marta; de Mateo, Salvador; Larrauri, Amparo

2010-04-01

We conducted a case-control and screening method studies to estimate influenza vaccine effectiveness (IVE) in the age group >or=65 years, based on the Spanish Influenza Sentinel Surveillance System (SISSS). Cases (influenza laboratory-confirmed) were compared to influenza-negative ILI patients (test-negative) and patients without ILI since the beginning of the season (non-ILI). For the screening method, cases' vaccination coverage was compared to the vaccination coverage of the GPs' catchment population. The results suggested a protective effect of the vaccine against laboratory-confirmed influenza in elderly in 2008-2009. The screening method and the test-negative control designs enable estimating IVE using exclusively SISSS data. (c) 2010 Elsevier Ltd. All rights reserved.

The treatment of infected nonunion of the tibia following intramedullary nailing by the Ilizarov method.

PubMed

Megas, Panagiotis; Saridis, Alkis; Kouzelis, Antonis; Kallivokas, Alkiviadis; Mylonas, Spyros; Tyllianakis, Minos

2010-03-01

The purpose of this study was to demonstrate the effectiveness of the Ilizarov method and circular external fixator in order to eradicate the infection and restore bone union, limb anatomy and functionality in cases with infected nonunion of the tibia following intramedullary nailing. During 7 years nine patients suffering from infected nonunion of the tibia after intramedullary nailing were treated in our department. The series comprised seven men and two women with an average age of 39.7 years (range 21-75 years). The patients had previously undergone an average of 4.8 operations (range 3-6 operations). Active purulent bone infection occurred in all nine patients. Bone defect was present in all patients with a mean size of 5 cm (range 2-12 cm). In three cases with bone defect less than 2 cm, monofocal compression osteosynthesis technique was used. In the rest cases where bone defect exceeded 2 cm, bifocal consecutive distraction-compression osteosynthesis technique was applied. Three patients required a local gastrocnemius flap. The mean follow-up period was 26.6 months (range 13-42 months). Results were evaluated using Paley's functional and radiological scoring system. Bone union was achieved in all nine patients without recurrence of infection during the follow-up period. Bone results were graded as excellent in five cases and good in the rest four cases. Functional results were graded as excellent in three cases, good in four and fare in two cases. Mean external fixation time was 187.4 days (range 89-412 days) and mean lengthening index was 32 days/cm (range 27-39 days/cm). Complications observed included eight grade II pin tract infections, axial deformity at the lengthening site in two cases and at the nonunion site in another two cases. Ankle joint stiffness was detected in five cases. The Ilizarov method may be an effective method in infected nonunions of the tibia following intramedullary nailing. Copyright 2009 Elsevier Ltd. All rights reserved.

Interactive Land-Use Optimization Using Laguerre Voronoi Diagram with Dynamic Generating Point Allocation

NASA Astrophysics Data System (ADS)

Chaidee, S.; Pakawanwong, P.; Suppakitpaisarn, V.; Teerasawat, P.

2017-09-01

In this work, we devise an efficient method for the land-use optimization problem based on Laguerre Voronoi diagram. Previous Voronoi diagram-based methods are more efficient and more suitable for interactive design than discrete optimization-based method, but, in many cases, their outputs do not satisfy area constraints. To cope with the problem, we propose a force-directed graph drawing algorithm, which automatically allocates generating points of Voronoi diagram to appropriate positions. Then, we construct a Laguerre Voronoi diagram based on these generating points, use linear programs to adjust each cell, and reconstruct the diagram based on the adjustment. We adopt the proposed method to the practical case study of Chiang Mai University's allocated land for a mixed-use complex. For this case study, compared to other Voronoi diagram-based method, we decrease the land allocation error by 62.557 %. Although our computation time is larger than the previous Voronoi-diagram-based method, it is still suitable for interactive design.

Formal Methods Case Studies for DO-333

NASA Technical Reports Server (NTRS)

Cofer, Darren; Miller, Steven P.

2014-01-01

RTCA DO-333, Formal Methods Supplement to DO-178C and DO-278A provides guidance for software developers wishing to use formal methods in the certification of airborne systems and air traffic management systems. The supplement identifies the modifications and additions to DO-178C and DO-278A objectives, activities, and software life cycle data that should be addressed when formal methods are used as part of the software development process. This report presents three case studies describing the use of different classes of formal methods to satisfy certification objectives for a common avionics example - a dual-channel Flight Guidance System. The three case studies illustrate the use of theorem proving, model checking, and abstract interpretation. The material presented is not intended to represent a complete certification effort. Rather, the purpose is to illustrate how formal methods can be used in a realistic avionics software development project, with a focus on the evidence produced that could be used to satisfy the verification objectives found in Section 6 of DO-178C.

Semi-automatic knee cartilage segmentation

NASA Astrophysics Data System (ADS)

Dam, Erik B.; Folkesson, Jenny; Pettersen, Paola C.; Christiansen, Claus

2006-03-01

Osteo-Arthritis (OA) is a very common age-related cause of pain and reduced range of motion. A central effect of OA is wear-down of the articular cartilage that otherwise ensures smooth joint motion. Quantification of the cartilage breakdown is central in monitoring disease progression and therefore cartilage segmentation is required. Recent advances allow automatic cartilage segmentation with high accuracy in most cases. However, the automatic methods still fail in some problematic cases. For clinical studies, even if a few failing cases will be averaged out in the overall results, this reduces the mean accuracy and precision and thereby necessitates larger/longer studies. Since the severe OA cases are often most problematic for the automatic methods, there is even a risk that the quantification will introduce a bias in the results. Therefore, interactive inspection and correction of these problematic cases is desirable. For diagnosis on individuals, this is even more crucial since the diagnosis will otherwise simply fail. We introduce and evaluate a semi-automatic cartilage segmentation method combining an automatic pre-segmentation with an interactive step that allows inspection and correction. The automatic step consists of voxel classification based on supervised learning. The interactive step combines a watershed transformation of the original scan with the posterior probability map from the classification step at sub-voxel precision. We evaluate the method for the task of segmenting the tibial cartilage sheet from low-field magnetic resonance imaging (MRI) of knees. The evaluation shows that the combined method allows accurate and highly reproducible correction of the segmentation of even the worst cases in approximately ten minutes of interaction.

Suicide and ethnicity in Malaysia.

PubMed

Murty, Om Prakash; Cheh, Lo Boon; Bakit, Pangie Anak; Hui, Foo Jhi; Ibrahim, Zarina Binti; Jusoh, Nazirah Binti

2008-03-01

This article highlights methods of ending life in different ethnic groups. This inference is drawn from analysis of data from suicidal cases from the University Malaya Medical Centre mortuary. This study also looked at sex, age, social, and employment factors. Kuala Lumpur has sizeable populations of Muslims, Chinese, Indians and Indonesian, etc. This study is based on 251 cases of suicide that were reported at the University Malaya Medical Centre from 2000 to 2004. Malaysia has a population of 22,662,365 people with 3 major ethnic groups: Malay (58%), Chinese (24%), and Indians (8%) with a minority of "others" (10%), which includes foreigners, Sabahan, and Sarawakian. This research found suicides of 164 male (65%) and 87 female (35%) victims. Their age ranged from 15 to 80 years. The age group from 21 to 30 had the highest total cases of suicide (83 of 251; 33.1%). Among ethnic groups highest rate of suicide was among Chinese with a total of 120 cases (120 of 251; 47.8%). As far as lone method of suicide is concerned, hangings accounted for the highest proportion of cases (108 of 251; 43%). Among ethnic groups, jumping from height was the commonest method used by Chinese (49 of 120; 41%), Malay (9 of 16; 56%), and others (15 of 28; 53.4%); whereas, hanging was the commonest method of committing suicide by Indians (49 of 87); Muslims showed the lowest cases of suicide (18 of 251; 7.2%). In poisoning group Indian was the highest ethnic group who used this method (20 of 37; 54.1%).

Utility of PCR, Culture, and Antigen Detection Methods for Diagnosis of Legionellosis.

PubMed

Chen, Derrick J; Procop, Gary W; Vogel, Sherilynn; Yen-Lieberman, Belinda; Richter, Sandra S

2015-11-01

The goal of this retrospective study was to evaluate the performance of different diagnostic tests for Legionnaires' disease in a clinical setting where Legionella pneumophila PCR had been introduced. Electronic medical records at the Cleveland Clinic were searched for Legionella urinary antigen (UAG), culture, and PCR tests ordered from March 2010 through December 2013. For cases where two or more test methods were performed and at least one was positive, the medical record was reviewed for relevant clinical and epidemiologic factors. Excluding repeat testing on a given patient, 19,912 tests were ordered (12,569 UAG, 3,747 cultures, and 3,596 PCR) with 378 positive results. The positivity rate for each method was 0.4% for culture, 0.8% for PCR, and 2.7% for UAG. For 37 patients, at least two test methods were performed with at least one positive result: 10 (27%) cases were positive by all three methods, 16 (43%) were positive by two methods, and 11 (30%) were positive by one method only. For the 32 patients with medical records available, clinical presentation was consistent with proven or probable Legionella infection in 84% of the cases. For those cases, the sensitivities of culture, PCR, and UAG were 50%, 92%, and 96%, respectively. The specificities were 100% for culture and 99.9% for PCR and UAG. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Utility of PCR, Culture, and Antigen Detection Methods for Diagnosis of Legionellosis

PubMed Central

Chen, Derrick J.; Procop, Gary W.; Vogel, Sherilynn; Yen-Lieberman, Belinda

2015-01-01

The goal of this retrospective study was to evaluate the performance of different diagnostic tests for Legionnaires' disease in a clinical setting where Legionella pneumophila PCR had been introduced. Electronic medical records at the Cleveland Clinic were searched for Legionella urinary antigen (UAG), culture, and PCR tests ordered from March 2010 through December 2013. For cases where two or more test methods were performed and at least one was positive, the medical record was reviewed for relevant clinical and epidemiologic factors. Excluding repeat testing on a given patient, 19,912 tests were ordered (12,569 UAG, 3,747 cultures, and 3,596 PCR) with 378 positive results. The positivity rate for each method was 0.4% for culture, 0.8% for PCR, and 2.7% for UAG. For 37 patients, at least two test methods were performed with at least one positive result: 10 (27%) cases were positive by all three methods, 16 (43%) were positive by two methods, and 11 (30%) were positive by one method only. For the 32 patients with medical records available, clinical presentation was consistent with proven or probable Legionella infection in 84% of the cases. For those cases, the sensitivities of culture, PCR, and UAG were 50%, 92%, and 96%, respectively. The specificities were 100% for culture and 99.9% for PCR and UAG. PMID:26292304

Assisting Defense Conversion Technology Transfer Efforts. A Case Study of Ohio’s Miami Valley.

DTIC Science & Technology

1995-09-01

Contracting Division, Wright-Patterson AFB OH. Official Letter Correspondence. 24 January 1994. Bryman , Alan. Research Methods and Organization Studies...Washington DC: 22 February 1993. Cooper, Donald R. and C. William Emory. Business Research Methods (Tifth Edition). Chicago: Richard D. Irwin, Inc...data was collected to address the research objective through a case study methodology. First, it describes and justifies the specific method used

In situ consolidation of offshore petroleum well structural casings by electrokinetic methods

NASA Astrophysics Data System (ADS)

Wrixon, Robert Christopher

Offshore drilling operations encounter cement wash-out problems while setting the initial structural casing (0--200 ft depth) due to the soft, unconsolidated nature of the sea-bed. Structural casings set by alternative methods have failed in up to 50% of cases due to insufficient frictional bearing capacity. This dissertation presents a method of increasing the bearing capacity of a jet-drilled or slick-drilled casing in-situ by applying a potential difference such that the casing is anodic compared to a remote cathode. It has been shown experimentally that clayey formations will swell and stick to a simulated anodic casing by the combined electrokinetic processes of electroosmosis and electrophoresis. Any cavities around the "casing" are eliminated and the formation is flush against the metal surface, increasing bearing capacity. The formation around the "casing" dries out due to electroosmotic migration of water away from the anode, increasing the shear strength of the surrounding soil. Corrosion products at the anode can further increase the soil shear strength by a process known as electrochemical hardening. This investigation has shown that the bearing capacity of anodic casings can potentially be increased by a factor of up to 1,000% in soft clays and silty clays. The existence of an optimal level of electrokinetic consolidation, beyond which the soil shear strength begins to degrade, has been demonstrated. The difficulties of applying electrokinetic methods to saline soil environments have been addressed and the process has been shown to be successful, as long as the requisite electric field strength is maintained. The efficiency of the electrokinetic consolidation technique has been shown to be affected by the soil water content, soil mineralogy, power supplied, time of treatment and the choice of anode material. Experiments in marine sediment show that increases in bearing capacities of about 300% can be achieved at optimal treatment conditions. With likely current and power restrictions, increases of 50% to 100% are realistic. This level of increase still makes offshore electrokinetic casing consolidation a viable process, given that it is attainable quickly and at a modest power requirement and given the enormous cost of a structural casing collapse.

A Careful Look at Modern Case Selection Methods

ERIC Educational Resources Information Center

Herron, Michael C.; Quinn, Kevin M.

2016-01-01

Case studies appear prominently in political science, sociology, and other social science fields. A scholar employing a case study research design in an effort to estimate causal effects must confront the question, how should cases be selected for analysis? This question is important because the results derived from a case study research program…

[Moral case deliberation: time for ethical reflection in the daily practice of mental health care].

PubMed

Vellinga, A; van Melle-Baaijens, E A H

2016-01-01

Nowadays, reflecting on ethics, which we choose to call moral case deliberation, is occurring more and more frequently in psychiatric institutions. We have personal experience of organising and supervising moral case deliberation in a large psychiatric institute and we can confirm the positive effects of moral case deliberation which have been reported in the literature. To describe a structured method for moral case deliberation which enables care-givers in health care and/or addiction care to reflect on moral dilemmas. We refer to the main findings in relevant literature and describe how we developed a structured method for implementing moral case deliberation. Our studies of the literature indicate that systematic reflection about ethical dilemmas can improve the quality of care and make care-givers more satisfied with their work. This is why we have developed our own method which is applicable particularly to psychiatric and/or addition care and which can be used systematically in discussions of moral dilemmas. Our method for discussing ethical issues works well in clinical practice, particularly when it is embedded in a multidisciplinary context. Of course, to ensure the continuity of the system, deliberation about moral and ethical issues needs to be financially safeguarded and embedded in the organisation. Discussion of moral issues improves the quality of care and increases care-givers' satisfaction with their work.

Elastic Critical Axial Force for the Torsional-Flexural Buckling of Thin-Walled Metal Members: An Approximate Method

NASA Astrophysics Data System (ADS)

Kováč, Michal

2015-03-01

Thin-walled centrically compressed members with non-symmetrical or mono-symmetrical cross-sections can buckle in a torsional-flexural buckling mode. Vlasov developed a system of governing differential equations of the stability of such member cases. Solving these coupled equations in an analytic way is only possible in simple cases. Therefore, Goľdenvejzer introduced an approximate method for the solution of this system to calculate the critical axial force of torsional-flexural buckling. Moreover, this can also be used in cases of members with various boundary conditions in bending and torsion. This approximate method for the calculation of critical force has been adopted into norms. Nowadays, we can also solve governing differential equations by numerical methods, such as the finite element method (FEM). Therefore, in this paper, the results of the approximate method and the FEM were compared to each other, while considering the FEM as a reference method. This comparison shows any discrepancies of the approximate method. Attention was also paid to when and why discrepancies occur. The approximate method can be used in practice by considering some simplifications, which ensure safe results.

Improved and standardized method for assessing years lived with disability after injury

PubMed Central

Polinder, S; Lyons, RA; Lund, J; Ditsuwan, V; Prinsloo, M; Veerman, JL; van Beeck, EF

2012-01-01

Abstract Objective To develop a standardized method for calculating years lived with disability (YLD) after injury. Methods The method developed consists of obtaining data on injury cases seen in emergency departments as well as injury-related hospital admissions, using the EUROCOST system to link the injury cases to disability information and employing empirical data to describe functional outcomes in injured patients. Findings Overall, 87 weights and proportions for 27 injury diagnoses involving lifelong consequences were included in the method. Almost all of the injuries investigated (96–100%) could be assigned to EUROCOST categories. The mean number of YLD per case of injury varied with the country studied. Use of the novel method resulted in estimated burdens of injury that were 3 to 8 times higher, in terms of YLD, than the corresponding estimates produced using the conventional methods employed in global burden of disease studies, which employ disability-adjusted life years. Conclusion The novel method for calculating YLD after injury can be applied in different settings, overcomes some limitations of the method used to calculate the global burden of disease, and allows more accurate estimates of the population burden of injury. PMID:22807597

Developing Appropriate Methods for Cost-Effectiveness Analysis of Cluster Randomized Trials

PubMed Central

Gomes, Manuel; Ng, Edmond S.-W.; Nixon, Richard; Carpenter, James; Thompson, Simon G.

2012-01-01

Aim. Cost-effectiveness analyses (CEAs) may use data from cluster randomized trials (CRTs), where the unit of randomization is the cluster, not the individual. However, most studies use analytical methods that ignore clustering. This article compares alternative statistical methods for accommodating clustering in CEAs of CRTs. Methods. Our simulation study compared the performance of statistical methods for CEAs of CRTs with 2 treatment arms. The study considered a method that ignored clustering—seemingly unrelated regression (SUR) without a robust standard error (SE)—and 4 methods that recognized clustering—SUR and generalized estimating equations (GEEs), both with robust SE, a “2-stage” nonparametric bootstrap (TSB) with shrinkage correction, and a multilevel model (MLM). The base case assumed CRTs with moderate numbers of balanced clusters (20 per arm) and normally distributed costs. Other scenarios included CRTs with few clusters, imbalanced cluster sizes, and skewed costs. Performance was reported as bias, root mean squared error (rMSE), and confidence interval (CI) coverage for estimating incremental net benefits (INBs). We also compared the methods in a case study. Results. Each method reported low levels of bias. Without the robust SE, SUR gave poor CI coverage (base case: 0.89 v. nominal level: 0.95). The MLM and TSB performed well in each scenario (CI coverage, 0.92–0.95). With few clusters, the GEE and SUR (with robust SE) had coverage below 0.90. In the case study, the mean INBs were similar across all methods, but ignoring clustering underestimated statistical uncertainty and the value of further research. Conclusions. MLMs and the TSB are appropriate analytical methods for CEAs of CRTs with the characteristics described. SUR and GEE are not recommended for studies with few clusters. PMID:22016450

Evaluation of two-phase flow solvers using Level Set and Volume of Fluid methods

NASA Astrophysics Data System (ADS)

Bilger, C.; Aboukhedr, M.; Vogiatzaki, K.; Cant, R. S.

2017-09-01

Two principal methods have been used to simulate the evolution of two-phase immiscible flows of liquid and gas separated by an interface. These are the Level-Set (LS) method and the Volume of Fluid (VoF) method. Both methods attempt to represent the very sharp interface between the phases and to deal with the large jumps in physical properties associated with it. Both methods have their own strengths and weaknesses. For example, the VoF method is known to be prone to excessive numerical diffusion, while the basic LS method has some difficulty in conserving mass. Major progress has been made in remedying these deficiencies, and both methods have now reached a high level of physical accuracy. Nevertheless, there remains an issue, in that each of these methods has been developed by different research groups, using different codes and most importantly the implementations have been fine tuned to tackle different applications. Thus, it remains unclear what are the remaining advantages and drawbacks of each method relative to the other, and what might be the optimal way to unify them. In this paper, we address this gap by performing a direct comparison of two current state-of-the-art variations of these methods (LS: RCLSFoam and VoF: interPore) and implemented in the same code (OpenFoam). We subject both methods to a pair of benchmark test cases while using the same numerical meshes to examine a) the accuracy of curvature representation, b) the effect of tuning parameters, c) the ability to minimise spurious velocities and d) the ability to tackle fluids with very different densities. For each method, one of the test cases is chosen to be fairly benign while the other test case is expected to present a greater challenge. The results indicate that both methods can be made to work well on both test cases, while displaying different sensitivity to the relevant parameters.

The Application of Simulation Method in Isothermal Elastic Natural Gas Pipeline

NASA Astrophysics Data System (ADS)

Xing, Chunlei; Guan, Shiming; Zhao, Yue; Cao, Jinggang; Chu, Yanji

2018-02-01

This Elastic pipeline mathematic model is of crucial importance in natural gas pipeline simulation because of its compliance with the practical industrial cases. The numerical model of elastic pipeline will bring non-linear complexity to the discretized equations. Hence the Newton-Raphson method cannot achieve fast convergence in this kind of problems. Therefore A new Newton Based method with Powell-Wolfe Condition to simulate the Isothermal elastic pipeline flow is presented. The results obtained by the new method aregiven based on the defined boundary conditions. It is shown that the method converges in all cases and reduces significant computational cost.

An operational modal analysis method in frequency and spatial domain

NASA Astrophysics Data System (ADS)

Wang, Tong; Zhang, Lingmi; Tamura, Yukio

2005-12-01

A frequency and spatial domain decomposition method (FSDD) for operational modal analysis (OMA) is presented in this paper, which is an extension of the complex mode indicator function (CMIF) method for experimental modal analysis (EMA). The theoretical background of the FSDD method is clarified. Singular value decomposition is adopted to separate the signal space from the noise space. Finally, an enhanced power spectrum density (PSD) is proposed to obtain more accurate modal parameters by curve fitting in the frequency domain. Moreover, a simulation case and an application case are used to validate this method.

Cautions on the Use of Investigative Case Studies in Meta-Evaluation.

ERIC Educational Resources Information Center

Smith, Nick L.

1990-01-01

A meta-analysis combining expert evaluation with naturalistic case study methods indicates that such investigations must use special methods to render evaluative judgments of worth. It is demonstrated that descriptive, interpretive, and evaluative aspects of such a study must be combined to yield justifiable conclusions. (TJH)

Teaching Forward

ERIC Educational Resources Information Center

Derriso, Anthony

2011-01-01

Educators and educational researchers alike are discovering that inductive methods--in which learners start with specific observations, problems, or cases and infer general laws from these instances--are more effective when higher-order thinking is the primary goal (Yadav et al. 2007). For decades, the case-study method has been widely used in law…

Innovations in the Teaching of Behavioral Sciences in the Preclinical Curriculum

ERIC Educational Resources Information Center

Mack, Kevin

2005-01-01

Objective: In problem-based learning curricula, cases are usually clustered into identified themes or organ systems. While this method of aggregating cases presents clear advantages in terms of resource alignment and student focus, an alternative "hidden cluster" approach provides rich opportunities for content integration. Method: The author…

Extracting information from the text of electronic medical records to improve case detection: a systematic review

PubMed Central

Carroll, John A; Smith, Helen E; Scott, Donia; Cassell, Jackie A

2016-01-01

Background Electronic medical records (EMRs) are revolutionizing health-related research. One key issue for study quality is the accurate identification of patients with the condition of interest. Information in EMRs can be entered as structured codes or unstructured free text. The majority of research studies have used only coded parts of EMRs for case-detection, which may bias findings, miss cases, and reduce study quality. This review examines whether incorporating information from text into case-detection algorithms can improve research quality. Methods A systematic search returned 9659 papers, 67 of which reported on the extraction of information from free text of EMRs with the stated purpose of detecting cases of a named clinical condition. Methods for extracting information from text and the technical accuracy of case-detection algorithms were reviewed. Results Studies mainly used US hospital-based EMRs, and extracted information from text for 41 conditions using keyword searches, rule-based algorithms, and machine learning methods. There was no clear difference in case-detection algorithm accuracy between rule-based and machine learning methods of extraction. Inclusion of information from text resulted in a significant improvement in algorithm sensitivity and area under the receiver operating characteristic in comparison to codes alone (median sensitivity 78% (codes + text) vs 62% (codes), P = .03; median area under the receiver operating characteristic 95% (codes + text) vs 88% (codes), P = .025). Conclusions Text in EMRs is accessible, especially with open source information extraction algorithms, and significantly improves case detection when combined with codes. More harmonization of reporting within EMR studies is needed, particularly standardized reporting of algorithm accuracy metrics like positive predictive value (precision) and sensitivity (recall). PMID:26911811

Validation of a Syndromic Case Definition for Detecting Emergency Department Visits Potentially Related to Marijuana.

PubMed

DeYoung, Kathryn; Chen, Yushiuan; Beum, Robert; Askenazi, Michele; Zimmerman, Cali; Davidson, Arthur J

Reliable methods are needed to monitor the public health impact of changing laws and perceptions about marijuana. Structured and free-text emergency department (ED) visit data offer an opportunity to monitor the impact of these changes in near-real time. Our objectives were to (1) generate and validate a syndromic case definition for ED visits potentially related to marijuana and (2) describe a method for doing so that was less resource intensive than traditional methods. We developed a syndromic case definition for ED visits potentially related to marijuana, applied it to BioSense 2.0 data from 15 hospitals in the Denver, Colorado, metropolitan area for the period September through October 2015, and manually reviewed each case to determine true positives and false positives. We used the number of visits identified by and the positive predictive value (PPV) for each search term and field to refine the definition for the second round of validation on data from February through March 2016. Of 126 646 ED visits during the first period, terms in 524 ED visit records matched ≥1 search term in the initial case definition (PPV, 92.7%). Of 140 932 ED visits during the second period, terms in 698 ED visit records matched ≥1 search term in the revised case definition (PPV, 95.7%). After another revision, the final case definition contained 6 keywords for marijuana or derivatives and 5 diagnosis codes for cannabis use, abuse, dependence, poisoning, and lung disease. Our syndromic case definition and validation method for ED visits potentially related to marijuana could be used by other public health jurisdictions to monitor local trends and for other emerging concerns.

Computer-aided detection of bladder mass within non-contrast-enhanced region of CT Urography (CTU)

NASA Astrophysics Data System (ADS)

Cha, Kenny H.; Hadjiiski, Lubomir M.; Chan, Heang-Ping; Caoili, Elaine M.; Cohan, Richard H.; Weizer, Alon; Zhou, Chuan

2016-03-01

We are developing a computer-aided detection system for bladder cancer in CT urography (CTU). We have previously developed methods for detection of bladder masses within the contrast-enhanced region of the bladder. In this study, we investigated methods for detection of bladder masses within the non-contrast enhanced region. The bladder was first segmented using a newly developed deep-learning convolutional neural network in combination with level sets. The non-contrast-enhanced region was separated from the contrast-enhanced region with a maximum-intensityprojection- based method. The non-contrast region was smoothed and a gray level threshold was employed to segment the bladder wall and potential masses. The bladder wall was transformed into a straightened thickness profile, which was analyzed to identify lesion candidates as a prescreening step. The lesion candidates were segmented using our autoinitialized cascaded level set (AI-CALS) segmentation method, and 27 morphological features were extracted for each candidate. Stepwise feature selection with simplex optimization and leave-one-case-out resampling were used for training and validation of a false positive (FP) classifier. In each leave-one-case-out cycle, features were selected from the training cases and a linear discriminant analysis (LDA) classifier was designed to merge the selected features into a single score for classification of the left-out test case. A data set of 33 cases with 42 biopsy-proven lesions in the noncontrast enhanced region was collected. During prescreening, the system obtained 83.3% sensitivity at an average of 2.4 FPs/case. After feature extraction and FP reduction by LDA, the system achieved 81.0% sensitivity at 2.0 FPs/case, and 73.8% sensitivity at 1.5 FPs/case.

Determining health-care facility catchment areas in Uganda using data on malaria-related visits

PubMed Central

Charland, Katia; Kigozi, Ruth; Dorsey, Grant; Kamya, Moses R; Buckeridge, David L

2014-01-01

Abstract Objective To illustrate the use of a new method for defining the catchment areas of health-care facilities based on their utilization. Methods The catchment areas of six health-care facilities in Uganda were determined using the cumulative case ratio: the ratio of the observed to expected utilization of a facility for a particular condition by patients from small administrative areas. The cumulative case ratio for malaria-related visits to these facilities was determined using data from the Uganda Malaria Surveillance Project. Catchment areas were also derived using various straight line and road network distances from the facility. Subsequently, the 1-year cumulative malaria case rate was calculated for each catchment area, as determined using the three methods. Findings The 1-year cumulative malaria case rate varied considerably with the method used to define the catchment areas. With the cumulative case ratio approach, the catchment area could include noncontiguous areas. With the distance approaches, the denominator increased substantially with distance, whereas the numerator increased only slightly. The largest cumulative case rate per 1000 population was for the Kamwezi facility: 234.9 (95% confidence interval, CI: 226.2–243.8) for a straight-line distance of 5 km, 193.1 (95% CI: 186.8–199.6) for the cumulative case ratio approach and 156.1 (95% CI: 150.9–161.4) for a road network distance of 5 km. Conclusion Use of the cumulative case ratio for malaria-related visits to determine health-care facility catchment areas was feasible. Moreover, this approach took into account patients’ actual addresses, whereas using distance from the facility did not. PMID:24700977

A Performance Weighted Collaborative Filtering algorithm for personalized radiology education.

PubMed

Lin, Hongli; Yang, Xuedong; Wang, Weisheng; Luo, Jiawei

2014-10-01

Devising an accurate prediction algorithm that can predict the difficulty level of cases for individuals and then selects suitable cases for them is essential to the development of a personalized training system. In this paper, we propose a novel approach, called Performance Weighted Collaborative Filtering (PWCF), to predict the difficulty level of each case for individuals. The main idea of PWCF is to assign an optimal weight to each rating used for predicting the difficulty level of a target case for a trainee, rather than using an equal weight for all ratings as in traditional collaborative filtering methods. The assigned weight is a function of the performance level of the trainee at which the rating was made. The PWCF method and the traditional method are compared using two datasets. The experimental data are then evaluated by means of the MAE metric. Our experimental results show that PWCF outperforms the traditional methods by 8.12% and 17.05%, respectively, over the two datasets, in terms of prediction precision. This suggests that PWCF is a viable method for the development of personalized training systems in radiology education. Copyright © 2014. Published by Elsevier Inc.

Locating Critical Circular and Unconstrained Failure Surface in Slope Stability Analysis with Tailored Genetic Algorithm

NASA Astrophysics Data System (ADS)

Pasik, Tomasz; van der Meij, Raymond

2017-12-01

This article presents an efficient search method for representative circular and unconstrained slip surfaces with the use of the tailored genetic algorithm. Searches for unconstrained slip planes with rigid equilibrium methods are yet uncommon in engineering practice, and little publications regarding truly free slip planes exist. The proposed method presents an effective procedure being the result of the right combination of initial population type, selection, crossover and mutation method. The procedure needs little computational effort to find the optimum, unconstrained slip plane. The methodology described in this paper is implemented using Mathematica. The implementation, along with further explanations, is fully presented so the results can be reproduced. Sample slope stability calculations are performed for four cases, along with a detailed result interpretation. Two cases are compared with analyses described in earlier publications. The remaining two are practical cases of slope stability analyses of dikes in Netherlands. These four cases show the benefits of analyzing slope stability with a rigid equilibrium method combined with a genetic algorithm. The paper concludes by describing possibilities and limitations of using the genetic algorithm in the context of the slope stability problem.

General method of solving the Schroedinger equation of atoms and molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakatsuji, Hiroshi

2005-12-15

We propose a general method of solving the Schroedinger equation of atoms and molecules. We first construct the wave function having the exact structure, using the ICI (iterative configuration or complement interaction) method and then optimize the variables involved by the variational principle. Based on the scaled Schroedinger equation and related principles, we can avoid the singularity problem of atoms and molecules and formulate a general method of calculating the exact wave functions in an analytical expansion form. We choose initial function {psi}{sub 0} and scaling g function, and then the ICI method automatically generates the wave function that hasmore » the exact structure by using the Hamiltonian of the system. The Hamiltonian contains all the information of the system. The free ICI method provides a flexible and variationally favorable procedure of constructing the exact wave function. We explain the computational procedure of the analytical ICI method routinely performed in our laboratory. Simple examples are given using hydrogen atom for the nuclear singularity case, the Hooke's atom for the electron singularity case, and the helium atom for both cases.« less

Understanding and Evaluating Assurance Cases

NASA Technical Reports Server (NTRS)

Rushby, John; Xu, Xidong; Rangarajan, Murali; Weaver, Thomas L.

2015-01-01

Assurance cases are a method for providing assurance for a system by giving an argument to justify a claim about the system, based on evidence about its design, development, and tested behavior. In comparison with assurance based on guidelines or standards (which essentially specify only the evidence to be produced), the chief novelty in assurance cases is provision of an explicit argument. In principle, this can allow assurance cases to be more finely tuned to the specific circumstances of the system, and more agile than guidelines in adapting to new techniques and applications. The first part of this report (Sections 1-4) provides an introduction to assurance cases. Although this material should be accessible to all those with an interest in these topics, the examples focus on software for airborne systems, traditionally assured using the DO-178C guidelines and its predecessors. A brief survey of some existing assurance cases is provided in Section 5. The second part (Section 6) considers the criteria, methods, and tools that may be used to evaluate whether an assurance case provides sufficient confidence that a particular system or service is fit for its intended use. An assurance case cannot provide unequivocal "proof" for its claim, so much of the discussion focuses on the interpretation of such less-than-definitive arguments, and on methods to counteract confirmation bias and other fallibilities in human reasoning.

Application of the backstepping method to the prediction of increase or decrease of infected population.

PubMed

Kuniya, Toshikazu; Sano, Hideki

2016-05-10

In mathematical epidemiology, age-structured epidemic models have usually been formulated as the boundary-value problems of the partial differential equations. On the other hand, in engineering, the backstepping method has recently been developed and widely studied by many authors. Using the backstepping method, we obtained a boundary feedback control which plays the role of the threshold criteria for the prediction of increase or decrease of newly infected population. Under an assumption that the period of infectiousness is same for all infected individuals (that is, the recovery rate is given by the Dirac delta function multiplied by a sufficiently large positive constant), the prediction method is simplified to the comparison of the numbers of reported cases at the current and previous time steps. Our prediction method was applied to the reported cases per sentinel of influenza in Japan from 2006 to 2015 and its accuracy was 0.81 (404 correct predictions to the total 500 predictions). It was higher than that of the ARIMA models with different orders of the autoregressive part, differencing and moving-average process. In addition, a proposed method for the estimation of the number of reported cases, which is consistent with our prediction method, was better than that of the best-fitted ARIMA model ARIMA(1,1,0) in the sense of mean square error. Our prediction method based on the backstepping method can be simplified to the comparison of the numbers of reported cases of the current and previous time steps. In spite of its simplicity, it can provide a good prediction for the spread of influenza in Japan.

Methods and apparatus for measurement of the resistivity of geological formations from within cased boreholes

DOEpatents

Vail, W.B. III.

1989-04-11

Methods and apparatus are disclosed which allow measurement of the resistivity of a geological formation through borehole casing which may be surrounded by brine saturated cement. A.C. current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. The A.C. voltage difference is measured between two additional vertically disposed electrodes on the interior of the casing which provides a measure of the resistivity of the geological formation. A calibration and nulling procedure is presented which minimizes the influence of variations in the thickness of the casing. The procedure also minimizes the influence of inaccurate placements of the additional vertically disposed electrodes. 3 figs.

Methods and apparatus for measurement of the resistivity of geological formations from within cased boreholes

DOEpatents

Vail, III, William B.

1989-01-01

Methods and apparatus are disclosed which allow measurement of the resistivity of a geological formation through borehole casing which may be surrounded by brine saturated cement. A.C. current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. The A.C. voltage difference is measured between two additional vertically disposed electrodes on the interior of the casing which provides a measure of the resistivity of the geological formation. A calibration and nulling procedure is presented which minimizes the influence of variations in the thickness of the casing. The procedure also minimizes the influence of inaccurate placements of the additional vertically disposed electrodes.

Phosphate analysis of natural sausage casings preserved in brines with phosphate additives as inactivating agent - Method validation.

PubMed

Wijnker, J J; Tjeerdsma-van Bokhoven, J L M; Veldhuizen, E J A

2009-01-01

Certain phosphates have been identified as suitable additives for the improvement of the microbial and mechanical properties of processed natural sausage casings. When mixed with NaCl (sodium chloride) and used under specific treatment and storage conditions, these phosphates are found to prevent the spread of foot-and-mouth disease and classical swine fever via treated casings. The commercially available Quantichrom™ phosphate assay kit has been evaluated as to whether it can serve as a reliable and low-tech method for routine analysis of casings treated with phosphate. The outcome of this study indicates that this particular assay kit has sufficient sensitivity to qualitatively determine the presence of phosphate in treated casings without interference of naturally occurring phosphate in salt used for brines in which casings are preserved.

Development of case statements in academic administration: a proactive method for achieving outcomes.

PubMed

Mundt, Mary H

2005-01-01

The complex nature of higher education presents academic administrators with unique challenges to communicate vision and strategic direction to a variety of internal and external audiences. The administrator must be prepared to engage in persuasive communication to describe the needs and desired outcomes of the academic unit. This article focuses on the use of the case statement as a communication tool for the nursing academic administrator. The case statement is a form of persuasive communication where a situation or need is presented in the context of the mission, vision, and strategic direction of a group or organization. The aim of the case statement is to enlist support in meeting the identified need. Fundamental assumptions about communicating case statements are described, as well as guidelines for how the academic administrator can prepare themselves for using the case statement method.

A retrospective likelihood approach for efficient integration of multiple omics factors in case-control association studies.

PubMed

Balliu, Brunilda; Tsonaka, Roula; Boehringer, Stefan; Houwing-Duistermaat, Jeanine

2015-03-01

Integrative omics, the joint analysis of outcome and multiple types of omics data, such as genomics, epigenomics, and transcriptomics data, constitute a promising approach for powerful and biologically relevant association studies. These studies often employ a case-control design, and often include nonomics covariates, such as age and gender, that may modify the underlying omics risk factors. An open question is how to best integrate multiple omics and nonomics information to maximize statistical power in case-control studies that ascertain individuals based on the phenotype. Recent work on integrative omics have used prospective approaches, modeling case-control status conditional on omics, and nonomics risk factors. Compared to univariate approaches, jointly analyzing multiple risk factors with a prospective approach increases power in nonascertained cohorts. However, these prospective approaches often lose power in case-control studies. In this article, we propose a novel statistical method for integrating multiple omics and nonomics factors in case-control association studies. Our method is based on a retrospective likelihood function that models the joint distribution of omics and nonomics factors conditional on case-control status. The new method provides accurate control of Type I error rate and has increased efficiency over prospective approaches in both simulated and real data. © 2015 Wiley Periodicals, Inc.

Clinical outcomes with the corticotomy-first technique associated with the Ilizarov method for the management of the septic long bones non-union.

PubMed

Hosny, Gamal Ahmed; Ahmed, Abdel-Salam Abdel-Aleem; Hussein, Mohamed Abd-Elaal

2018-04-07

Corticotomy is an integral part of the Ilizarov method on management of infected nonunited fractures that are challenging orthopaedic surgeons. However, the presence of active draining sinuses may contaminate the operative field with the potential of developing corticotomy site infection. The authors present a surgical technique aiming at minimizing or avoiding the risk of surgical site infection (SSI) in the corticotomy zone. A total of 144 cases of draining infected nonunions were treated by Ilizarov fixator using the corticotomy-first technique. The study included humeral (18 cases), femoral (52 cases), and tibial (74 cases) nonunions. The mean age was 44.48 years with 87 males and 57 females. The mean duration of nonunion was 28.69 months. After debridement, the combined shortening and nonunion gap averaged 5.98 (range 3-10) cm. Evaluation of bone and functional results was done according to Association for the Study and Application of the Method of Ilizarov (ASAMI) criteria. The follow-up period averaged 51.05 (range 36-72) months. None of the cases developed corticotomy site or distraction gap infection. Union was successfully achieved in 141 cases (97.92%). Nonunion persisted in three cases (2.08%) in the distal tibia. Infection was eventually controlled in 138 cases (95.83%). Bone grafting was not needed in any case. The Ilizarov fixator with the corticotomy-first technique was effective in the management of draining infected non-united fractures of long bones while avoiding the SSI in the corticotomy site in all cases.

[Analysis on influencing factor of the complications of percutaneous dilational tracheotomy].

PubMed

Zhai, Xiang; Zhang, Jinling; Hang, Wei; Wang, Ming; Shi, Zhan; Mi, Yue; Hu, Yunlei; Liu, Gang

2015-01-01

To Analyze the influence factors on the complications of percutaneous dilational tracheotomy. Between August 2008 and February 2014, there were 3 450 patients with the indications of tracheotomy accepted percutaneous dilational tracheostomy, mainly using percutaneous dilational and percutaneous guide wire forceps in these cases. Statistical analysis was performed by SPSS 19.0 software on postoperative complications, the possible influence factors including age, gender, etiology, preoperative hypoxia, obesity, preoperative pulmonary infection, state of consciousness, operation method, operation doctor and whether with tracheal intubation. Among 3 450 patients, there were 164 cases with intraoperative or postoperative complications, including postoperative bleeding in 74 cases (2.14%), subcutaneous emphysema in 54 cases (1.57%), wound infection in 16 cases (0.46%), pneumothorax in 6 cases (0.17%), mediastinal emphysema in 5 cases (0.14%), operation failed and change to conventional incision in 4 cases (0.12%), tracheoesophageal fistula in 2 cases (0.06%), death in 3 cases(0.09%).Obesity, etiology, preoperative hypoxia, preoperative pulmonary infection, state of consciousness and operation method were the main influence factors, with significant statistical difference (χ(2) value was 0.010, 0.000, 0.002, 0.000, 0.000, 0.000, all P < 0.05). Gender, age, operation doctor and whether there was the endotracheal intubation were not the main influence factors. There was no significant statistical difference (P > 0.05). Although percutaneous dilational tracheostomy is safe, but the complications can also happen. In order to reduce the complications, it is need to pay attention to the factors of obesity, etiology, preoperative hypoxia, preoperative pulmonary infection, state of consciousness and operation method.

Video-Assisted Thoracic Surgical Lobectomy for Lung Cancer: Description of a Learning Curve.

PubMed

Yao, Fei; Wang, Jian; Yao, Ju; Hang, Fangrong; Cao, Shiqi; Cao, Yongke

2017-07-01

Video-assisted thoracic surgical (VATS) lobectomy is gaining popularity in the treatment of lung cancer. The aim of this study is to investigate the learning curve of VATS lobectomy by using multidimensional methods and to compare the learning curve groups with respect to perioperative clinical outcomes. We retrospectively reviewed a prospective database to identify 67 consecutive patients who underwent VATS lobectomy for lung cancer by a single surgeon. The learning curve was analyzed by using moving average and the cumulative sum (CUSUM) method. With the moving average and CUSUM analyses for the operation time, patients were stratified into two groups, with chronological order defining early and late experiences. Perioperative clinical outcomes were compared between the two learning curve groups. According to the moving average method, the peak point for operation time occurred at the 26th case. The CUSUM method also showed the operation time peak point at the 26th case. When results were compared between early- and late-experience periods, the operation time, duration of chest drainage, and postoperative hospital stay were significantly longer in the early-experience group (cases 1 to 26). The intraoperative estimated blood loss was significantly less in the late-experience group (cases 27 to 67). CUSUM charts showed a decreasing duration of chest drainage after the 36th case and shortening postoperative hospital stay after the 37th case. Multidimensional statistical analyses suggested that the learning curve for VATS lobectomy for lung cancer required ∼26 cases. Favorable intraoperative and postoperative care parameters for VATS lobectomy were observed in the late-experience group.

Real Options in Defense R and D: A Decision Tree Analysis Approach for Options to Defer, Abandon, and Expand

DTIC Science & Technology

2016-12-01

chosen rather than complex ones , and responds to the criticism of the DTA approach. Chapter IV provides three separate case studies in defense R&D...defense R&D projects. To this end, the first section describes the case study method and the advantages of using simple models over more complex ones ...the analysis lacked empirical data and relied on subjective data, the analysis successfully combined the DTA approach with the case study method and

Transport Test Problems for Hybrid Methods Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaver, Mark W.; Miller, Erin A.; Wittman, Richard S.

2011-12-28

This report presents 9 test problems to guide testing and development of hybrid calculations for the ADVANTG code at ORNL. These test cases can be used for comparing different types of radiation transport calculations, as well as for guiding the development of variance reduction methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22.

Anisotropic adaptive mesh generation in two dimensions for CFD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borouchaki, H.; Castro-Diaz, M.J.; George, P.L.

This paper describes the extension of the classical Delaunay method in the case where anisotropic meshes are required such as in CFD when the modelized physic is strongly directional. The way in which such a mesh generation method can be incorporated in an adaptative loop of CFD as well as the case of multicriterium adaptation are discussed. Several concrete application examples are provided to illustrate the capabilities of the proposed method.

USA hCG reference service, 10-year report.

PubMed

Cole, Laurence A; Laidler, Laura L; Muller, Carolyn Y

2010-08-01

The USA hCG Reference Service has been dealing with cases of persistent low levels of hCG and gestational trophoblastic diseases for 10years. Here we present the complete experience. Total hCG in serum and urine was measured using the Siemen's Immulite 1000 assay. Hyperglycosylated hCG, nicked hCG, free ss-subunit and ss-core fragment were measured using microtiterplate assays with antibodies B152, B151, FBT11 and B210, respectively. The USA hCG Reference Service has identified 83 cases of false-positive hCG, 71 cases of aggressive gestational trophoblastic disease (GTD), 52 cases of minimally invasive GTD, 168 cases of quiescent GTD and 22 cases of placenta site trophoblastic tumor (PSTT). In addition, 103 cases of pituitary hCG have been identified, 60 cases of nontrophoblastic tumor, 4 cases of inherited hCG and 2 cases of Munchausen's syndrome. This is 565 cases total. Multiple new methods are described and tested for diagnosing all of these disorders. The USA hCG Reference Service experience shows new methods for detecting multiple hCG-related disorders and recommends new approaches for detecting these hCG-related disorders. 2010 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Building Language Educators: The Implications of Case-Based Pedagogy Using Practicum-Based Student-Teacher-Generated Cases for Pre-Service Language Teacher Education

ERIC Educational Resources Information Center

Cournoyer, Amy Beth

2014-01-01

This case study investigated case-based pedagogy using student-teacher-generated cases as an instructional tool in the preparation of 12 pre-service ESL, Bilingual, and Modern Foreign Language teachers enrolled in a Student Teaching Seminar at a post-secondary institution. In the fall methods course, each participant generated a case study based…

Teaching Cases on Family Involvement

ERIC Educational Resources Information Center

Harvard Family Research Project, 2010

2010-01-01

Teaching cases are a valuable tool in preparing teachers and school administrators to engage effectively with families. Because the case method presents a story in practice, it offers students an active learning opportunity. Teaching cases involve real world situations and consider the perspectives of various stakeholders, including teachers,…

Selecting Cases for Intensive Analysis: A Diversity of Goals and Methods

ERIC Educational Resources Information Center

Gerring, John; Cojocaru, Lee

2016-01-01

This study revisits the task of case selection in case study research, proposing a new typology of strategies that is explicit, disaggregated, and relatively comprehensive. A secondary goal is to explore the prospects for case selection by "algorithm," aka "ex ante," "automatic," "quantitative,"…

Case Study: What Makes a Good Case, Revisited: The Survey Monkey Tells All

ERIC Educational Resources Information Center

Herried, Clyde Freeman; Prud'homme-Genereux, Annie; Schiller, Nancy A.; Herreid, Ky F.; Wright, Carolyn

2016-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. In this month's issue the authors provide a more definitive answer to the "What Makes a Good Case?" question based on a just-completed Survey Monkey survey given to NCCSTS teachers.

Supporting Case-Based Learning in Information Security with Web-Based Technology

ERIC Educational Resources Information Center

He, Wu; Yuan, Xiaohong; Yang, Li

2013-01-01

Case-based learning has been widely used in many disciplines. As an effective pedagogical method, case-based learning is also being used to support teaching and learning in the domain of information security. In this paper, we demonstrate case-based learning in information security by sharing our experiences in using a case study to teach security…

The intervals method: a new approach to analyse finite element outputs using multivariate statistics

PubMed Central

De Esteban-Trivigno, Soledad; Püschel, Thomas A.; Fortuny, Josep

2017-01-01

Background In this paper, we propose a new method, named the intervals’ method, to analyse data from finite element models in a comparative multivariate framework. As a case study, several armadillo mandibles are analysed, showing that the proposed method is useful to distinguish and characterise biomechanical differences related to diet/ecomorphology. Methods The intervals’ method consists of generating a set of variables, each one defined by an interval of stress values. Each variable is expressed as a percentage of the area of the mandible occupied by those stress values. Afterwards these newly generated variables can be analysed using multivariate methods. Results Applying this novel method to the biological case study of whether armadillo mandibles differ according to dietary groups, we show that the intervals’ method is a powerful tool to characterize biomechanical performance and how this relates to different diets. This allows us to positively discriminate between specialist and generalist species. Discussion We show that the proposed approach is a useful methodology not affected by the characteristics of the finite element mesh. Additionally, the positive discriminating results obtained when analysing a difficult case study suggest that the proposed method could be a very useful tool for comparative studies in finite element analysis using multivariate statistical approaches. PMID:29043107

Killing-Yano tensors in spaces admitting a hypersurface orthogonal Killing vector

NASA Astrophysics Data System (ADS)

Garfinkle, David; Glass, E. N.

2013-03-01

Methods are presented for finding Killing-Yano tensors, conformal Killing-Yano tensors, and conformal Killing vectors in spacetimes with a hypersurface orthogonal Killing vector. These methods are similar to a method developed by the authors for finding Killing tensors. In all cases one decomposes both the tensor and the equation it satisfies into pieces along the Killing vector and pieces orthogonal to the Killing vector. Solving the separate equations that result from this decomposition requires less computing than integrating the original equation. In each case, examples are given to illustrate the method.

A weak Galerkin generalized multiscale finite element method

DOE PAGES

Mu, Lin; Wang, Junping; Ye, Xiu

2016-03-31

In this study, we propose a general framework for weak Galerkin generalized multiscale (WG-GMS) finite element method for the elliptic problems with rapidly oscillating or high contrast coefficients. This general WG-GMS method features in high order accuracy on general meshes and can work with multiscale basis derived by different numerical schemes. A special case is studied under this WG-GMS framework in which the multiscale basis functions are obtained by solving local problem with the weak Galerkin finite element method. Convergence analysis and numerical experiments are obtained for the special case.

A weak Galerkin generalized multiscale finite element method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mu, Lin; Wang, Junping; Ye, Xiu

In this study, we propose a general framework for weak Galerkin generalized multiscale (WG-GMS) finite element method for the elliptic problems with rapidly oscillating or high contrast coefficients. This general WG-GMS method features in high order accuracy on general meshes and can work with multiscale basis derived by different numerical schemes. A special case is studied under this WG-GMS framework in which the multiscale basis functions are obtained by solving local problem with the weak Galerkin finite element method. Convergence analysis and numerical experiments are obtained for the special case.

The Paradox of "Structured" Methods for Software Requirements Management: A Case Study of an e-Government Development Project

NASA Astrophysics Data System (ADS)

Conboy, Kieran; Lang, Michael

This chapter outlines the alternative perspectives of "rationalism" and "improvisation" within information systems development and describes the major shortcomings of each. It then discusses how these shortcomings manifested themselves within an e-government case study where a "structured" requirements management method was employed. Although this method was very prescriptive and firmly rooted in the "rational" paradigm, it was observed that users often resorted to improvised behaviour, such as privately making decisions on how certain aspects of the method should or should not be implemented.

Developing appropriate methods for cost-effectiveness analysis of cluster randomized trials.

PubMed

Gomes, Manuel; Ng, Edmond S-W; Grieve, Richard; Nixon, Richard; Carpenter, James; Thompson, Simon G

2012-01-01

Cost-effectiveness analyses (CEAs) may use data from cluster randomized trials (CRTs), where the unit of randomization is the cluster, not the individual. However, most studies use analytical methods that ignore clustering. This article compares alternative statistical methods for accommodating clustering in CEAs of CRTs. Our simulation study compared the performance of statistical methods for CEAs of CRTs with 2 treatment arms. The study considered a method that ignored clustering--seemingly unrelated regression (SUR) without a robust standard error (SE)--and 4 methods that recognized clustering--SUR and generalized estimating equations (GEEs), both with robust SE, a "2-stage" nonparametric bootstrap (TSB) with shrinkage correction, and a multilevel model (MLM). The base case assumed CRTs with moderate numbers of balanced clusters (20 per arm) and normally distributed costs. Other scenarios included CRTs with few clusters, imbalanced cluster sizes, and skewed costs. Performance was reported as bias, root mean squared error (rMSE), and confidence interval (CI) coverage for estimating incremental net benefits (INBs). We also compared the methods in a case study. Each method reported low levels of bias. Without the robust SE, SUR gave poor CI coverage (base case: 0.89 v. nominal level: 0.95). The MLM and TSB performed well in each scenario (CI coverage, 0.92-0.95). With few clusters, the GEE and SUR (with robust SE) had coverage below 0.90. In the case study, the mean INBs were similar across all methods, but ignoring clustering underestimated statistical uncertainty and the value of further research. MLMs and the TSB are appropriate analytical methods for CEAs of CRTs with the characteristics described. SUR and GEE are not recommended for studies with few clusters.

Research of Litchi Diseases Diagnosis Expertsystem Based on Rbr and Cbr

NASA Astrophysics Data System (ADS)

Xu, Bing; Liu, Liqun

To conquer the bottleneck problems existing in the traditional rule-based reasoning diseases diagnosis system, such as low reasoning efficiency and lack of flexibility, etc.. It researched the integrated case-based reasoning (CBR) and rule-based reasoning (RBR) technology, and put forward a litchi diseases diagnosis expert system (LDDES) with integrated reasoning method. The method use data mining and knowledge obtaining technology to establish knowledge base and case library. It adopt rules to instruct the retrieval and matching for CBR, and use association rule and decision trees algorithm to calculate case similarity.The experiment shows that the method can increase the system's flexibility and reasoning ability, and improve the accuracy of litchi diseases diagnosis.

Drug concealment in custody deaths--two cases.

PubMed

Busuttil, A

1994-06-01

Internal concealment of drugs of abuse is a well established method of transporting such substances to avoid detection while they are being smuggled across international frontier lines.(1,2) The same method has been used by dealers and 'pushers' in between purchases on their selling rounds to avoid detection by the police. These methods of hiding drugs may be used by persons taken into short-term custody, in their belief that potential withdrawal effects would thus be avoided by continued availability of their drugs. Two cases are reported in which such concealment was discovered at autopsy after death had occurred while in police custody. In one case the drug concealed was dihydrocodeine and was directly responsible for the death.

Validation of an improved abnormality insertion method for medical image perception investigations

NASA Astrophysics Data System (ADS)

Madsen, Mark T.; Durst, Gregory R.; Caldwell, Robert T.; Schartz, Kevin M.; Thompson, Brad H.; Berbaum, Kevin S.

2009-02-01

The ability to insert abnormalities in clinical tomographic images makes image perception studies with medical images practical. We describe a new insertion technique and its experimental validation that uses complementary image masks to select an abnormality from a library and place it at a desired location. The method was validated using a 4-alternative forced-choice experiment. For each case, four quadrants were simultaneously displayed consisting of 5 consecutive frames of a chest CT with a pulmonary nodule. One quadrant was unaltered, while the other 3 had the nodule from the unaltered quadrant artificially inserted. 26 different sets were generated and repeated with order scrambling for a total of 52 cases. The cases were viewed by radiology staff and residents who ranked each quadrant by realistic appearance. On average, the observers were able to correctly identify the unaltered quadrant in 42% of cases, and identify the unaltered quadrant both times it appeared in 25% of cases. Consensus, defined by a majority of readers, correctly identified the unaltered quadrant in only 29% of 52 cases. For repeats, the consensus observer successfully identified the unaltered quadrant only once. We conclude that the insertion method can be used to reliably place abnormalities in perception experiments.

Fusion of Scores in a Detection Context Based on Alpha Integration.

PubMed

Soriano, Antonio; Vergara, Luis; Ahmed, Bouziane; Salazar, Addisson

2015-09-01

We present a new method for fusing scores corresponding to different detectors (two-hypotheses case). It is based on alpha integration, which we have adapted to the detection context. Three optimization methods are presented: least mean square error, maximization of the area under the ROC curve, and minimization of the probability of error. Gradient algorithms are proposed for the three methods. Different experiments with simulated and real data are included. Simulated data consider the two-detector case to illustrate the factors influencing alpha integration and demonstrate the improvements obtained by score fusion with respect to individual detector performance. Two real data cases have been considered. In the first, multimodal biometric data have been processed. This case is representative of scenarios in which the probability of detection is to be maximized for a given probability of false alarm. The second case is the automatic analysis of electroencephalogram and electrocardiogram records with the aim of reproducing the medical expert detections of arousal during sleeping. This case is representative of scenarios in which probability of error is to be minimized. The general superior performance of alpha integration verifies the interest of optimizing the fusing parameters.

[Immunohistochemistry diagnosis of fungal infections].

PubMed

Rocha, D C; Duarte, M I; Pagliari, C; de Oliveira, M S

1998-01-01

Because the mycosis incidence has increased a lot with the appearing of AIDS, the Immunohistochemistry study among fungus shows the importance of fast methods for their identification that have advantage of been a durable method in comparison with immunofluorescence and the possibility of making retrospective studies in material embedded in paraffin. The Immunohistochemistry reaction with Histoplasma capsulatum, Pneumocystis carinii; and Criptococcus neoformans antibodies were sensitive, specifics, and intensely positive in all the cases previously diagnosed as Histoplasmosis, Pneumocystosis and Cryptococcosis, without cross-reaction with other fungus; while the anti-Candida albicans antibody showed weak positiveness in four Histoplasmosis cases, in one of Paracoccidioidomycosis cases and Sporotrichosis case; and the reactions with the antibody anti-P. brasiliensis were intensely positive in all the Paracoccidioidomycosis cases and weakly positive in two Histoplasmosis and two of the four Candidiasis cases. The previous identification of each fungi on tissue sample was made by Grocott method. This preliminary study showed that it is necessary to use other kinds of antibody and fungus, in order to get more details about the possible occurrence of cross-reactions. We suggest the use of new antibodies, with new standardizations in order to find the best titles for each reaction and eliminate the cross-reactions.

Teaching ethics in the clinic. The theory and practice of moral case deliberation.

PubMed

Molewijk, A C; Abma, T; Stolper, M; Widdershoven, G

2008-02-01

A traditional approach to teaching medical ethics aims to provide knowledge about ethics. This is in line with an epistemological view on ethics in which moral expertise is assumed to be located in theoretical knowledge and not in the moral experience of healthcare professionals. The aim of this paper is to present an alternative, contextual approach to teaching ethics, which is grounded in a pragmatic-hermeneutical and dialogical ethics. This approach is called moral case deliberation. Within moral case deliberation, healthcare professionals bring in their actual moral questions during a structured dialogue. The ethicist facilitates the learning process by using various conversation methods in order to find answers to the case and to develop moral competencies. The case deliberations are not unique events, but are a structural part of the professional training on the work floor within healthcare institutions. This article presents the underlying theory on (teaching) ethics and illustrates this approach with an example of a moral case deliberation project in a Dutch psychiatric hospital. The project was evaluated using the method of responsive evaluation. This method provided us with rich information about the implementation process and effects the research process itself also lent support to the process of implementation.

Development, Characterization, and Resultant Properties of a Carbon, Boron, and Chromium Ternary Diffusion System

NASA Astrophysics Data System (ADS)

Domec, Brennan S.

In today's industry, engineering materials are continuously pushed to the limits. Often, the application only demands high-specification properties in a narrowly-defined region of the material, such as the outermost surface. This, in combination with the economic benefits, makes case hardening an attractive solution to meet industry demands. While case hardening has been in use for decades, applications demanding high hardness, deep case depth, and high corrosion resistance are often under-served by this process. Instead, new solutions are required. The goal of this study is to develop and characterize a new borochromizing process applied to a pre-carburized AISI 8620 alloy steel. The process was successfully developed using a combination of computational simulations, calculations, and experimental testing. Process kinetics were studied by fitting case depth measurement data to Fick's Second Law of Diffusion and an Arrhenius equation. Results indicate that the kinetics of the co-diffusion method are unaffected by the addition of chromium to the powder pack. The results also show that significant structural degradation of the case occurs when chromizing is applied sequentially to an existing boronized case. The amount of degradation is proportional to the chromizing parameters. Microstructural evolution was studied using metallographic methods, simulation and computational calculations, and analytical techniques. While the co-diffusion process failed to enrich the substrate with chromium, significant enrichment is obtained with the sequential diffusion process. The amount of enrichment is directly proportional to the chromizing parameters with higher parameters resulting in more enrichment. The case consists of M7C3 and M23C6 carbides nearest the surface, minor amounts of CrB, and a balance of M2B. Corrosion resistance was measured with salt spray and electrochemical methods. These methods confirm the benefit of surface enrichment by chromium in the sequential diffusion method with corrosion resistance increasing directly with chromium concentration. The results also confirm the deleterious effect of surface-breaking case defects and the need to reduce or eliminate them. The best combination of microstructural integrity, mean surface hardness, effective case depth, and corrosion resistance is obtained in samples sequentially boronized and chromized at 870°C for 6hrs. Additional work is required to further optimize process parameters and case properties.

Who's in and why? A typology of stakeholder analysis methods for natural resource management.

PubMed

Reed, Mark S; Graves, Anil; Dandy, Norman; Posthumus, Helena; Hubacek, Klaus; Morris, Joe; Prell, Christina; Quinn, Claire H; Stringer, Lindsay C

2009-04-01

Stakeholder analysis means many things to different people. Various methods and approaches have been developed in different fields for different purposes, leading to confusion over the concept and practice of stakeholder analysis. This paper asks how and why stakeholder analysis should be conducted for participatory natural resource management research. This is achieved by reviewing the development of stakeholder analysis in business management, development and natural resource management. The normative and instrumental theoretical basis for stakeholder analysis is discussed, and a stakeholder analysis typology is proposed. This consists of methods for: i) identifying stakeholders; ii) differentiating between and categorising stakeholders; and iii) investigating relationships between stakeholders. The range of methods that can be used to carry out each type of analysis is reviewed. These methods and approaches are then illustrated through a series of case studies funded through the Rural Economy and Land Use (RELU) programme. These case studies show the wide range of participatory and non-participatory methods that can be used, and discuss some of the challenges and limitations of existing methods for stakeholder analysis. The case studies also propose new tools and combinations of methods that can more effectively identify and categorise stakeholders and help understand their inter-relationships.

Barriers to Implementation of Case Management for Patients With Dementia: A Systematic Mixed Studies Review

PubMed Central

Khanassov, Vladimir; Vedel, Isabelle; Pluye, Pierre

2014-01-01

PURPOSE Results of case management designed for patients with dementia and their caregivers in community-based primary health care (CBPHC) were inconsistent. Our objective was to identify the relationships between key outcomes of case management and barriers to implementation. METHODS We conducted a systematic mixed studies review (including quantitative and qualitative studies). Literature search was performed in MEDLINE, PsycINFO, Embase, and Cochrane Library (1995 up to August 2012). Case management intervention studies were used to assess clinical outcomes for patients, service use, caregiver outcomes, satisfaction, and cost-effectiveness. Qualitative studies were used to examine barriers to case management implementation. Patterns in the relationships between barriers to implementation and outcomes were identified using the configurational comparative method. The quality of studies was assessed using the Mixed Methods Appraisal Tool. RESULTS Forty-three studies were selected (31 quantitative and 12 qualitative). Case management had a limited positive effect on behavioral symptoms of dementia and length of hospital stay for patients and on burden and depression for informal caregivers. Interventions that addressed a greater number of barriers to implementation resulted in increased number of positive outcomes. Results suggested that high-intensity case management was necessary and sufficient to produce positive clinical outcomes for patients and to optimize service use. Effective communication within the CBPHC team was necessary and sufficient for positive outcomes for caregivers. CONCLUSIONS Clinicians and managers who implement case management in CBPHC should take into account high-intensity case management (small caseload, regular proactive patient follow-up, regular contact between case managers and family physicians) and effective communication between case managers and other CBPHC professionals and services. PMID:25354410

Estimating time-varying exposure-outcome associations using case-control data: logistic and case-cohort analyses.

PubMed

Keogh, Ruth H; Mangtani, Punam; Rodrigues, Laura; Nguipdop Djomo, Patrick

2016-01-05

Traditional analyses of standard case-control studies using logistic regression do not allow estimation of time-varying associations between exposures and the outcome. We present two approaches which allow this. The motivation is a study of vaccine efficacy as a function of time since vaccination. Our first approach is to estimate time-varying exposure-outcome associations by fitting a series of logistic regressions within successive time periods, reusing controls across periods. Our second approach treats the case-control sample as a case-cohort study, with the controls forming the subcohort. In the case-cohort analysis, controls contribute information at all times they are at risk. Extensions allow left truncation, frequency matching and, using the case-cohort analysis, time-varying exposures. Simulations are used to investigate the methods. The simulation results show that both methods give correct estimates of time-varying effects of exposures using standard case-control data. Using the logistic approach there are efficiency gains by reusing controls over time and care should be taken over the definition of controls within time periods. However, using the case-cohort analysis there is no ambiguity over the definition of controls. The performance of the two analyses is very similar when controls are used most efficiently under the logistic approach. Using our methods, case-control studies can be used to estimate time-varying exposure-outcome associations where they may not previously have been considered. The case-cohort analysis has several advantages, including that it allows estimation of time-varying associations as a continuous function of time, while the logistic regression approach is restricted to assuming a step function form for the time-varying association.

A method for predicting the noise levels of coannular jets with inverted velocity profiles

NASA Technical Reports Server (NTRS)

Russell, J. W.

1979-01-01

A coannular jet was equated with a single stream equivalent jet with the same mass flow, energy, and thrust. The acoustic characteristics of the coannular jet were then related to the acoustic characteristics of the single jet. Forward flight effects were included by incorporating a forward exponent, a Doppler amplification factor, and a Strouhal frequency shift. Model test data, including 48 static cases and 22 wind tunnel cases, were used to evaluate the prediction method. For the static cases and the low forward velocity wind tunnel cases, the spectral mean square pressure correlation coefficients were generally greater than 90 percent, and the spectral sound pressure level standard deviation were generally less than 3 decibels. The correlation coefficient and the standard deviation were not affected by changes in equivalent jet velocity. Limitations of the prediction method are also presented.

Design considerations for case series models with exposure onset measurement error.

PubMed

Mohammed, Sandra M; Dalrymple, Lorien S; Sentürk, Damla; Nguyen, Danh V

2013-02-28

The case series model allows for estimation of the relative incidence of events, such as cardiovascular events, within a pre-specified time window after an exposure, such as an infection. The method requires only cases (individuals with events) and controls for all fixed/time-invariant confounders. The measurement error case series model extends the original case series model to handle imperfect data, where the timing of an infection (exposure) is not known precisely. In this work, we propose a method for power/sample size determination for the measurement error case series model. Extensive simulation studies are used to assess the accuracy of the proposed sample size formulas. We also examine the magnitude of the relative loss of power due to exposure onset measurement error, compared with the ideal situation where the time of exposure is measured precisely. To facilitate the design of case series studies, we provide publicly available web-based tools for determining power/sample size for both the measurement error case series model as well as the standard case series model. Copyright © 2012 John Wiley & Sons, Ltd.

GIS-based regionalized life cycle assessment: how big is small enough? Methodology and case study of electricity generation.

PubMed

Mutel, Christopher L; Pfister, Stephan; Hellweg, Stefanie

2012-01-17

We describe a new methodology for performing regionalized life cycle assessment and systematically choosing the spatial scale of regionalized impact assessment methods. We extend standard matrix-based calculations to include matrices that describe the mapping from inventory to impact assessment spatial supports. Uncertainty in inventory spatial data is modeled using a discrete spatial distribution function, which in a case study is derived from empirical data. The minimization of global spatial autocorrelation is used to choose the optimal spatial scale of impact assessment methods. We demonstrate these techniques on electricity production in the United States, using regionalized impact assessment methods for air emissions and freshwater consumption. Case study results show important differences between site-generic and regionalized calculations, and provide specific guidance for future improvements of inventory data sets and impact assessment methods.

A fibrin adhesive sealing method for the prevention of pancreatic fistula following distal pancreatectomy.

PubMed

Mita, Kazuhito; Ito, Hideto; Fukumoto, Masato; Murabayashi, Ryo; Koizumi, Kazuya; Hayashi, Takashi; Kikuchi, Hiroyuki; Kagaya, Tadashi

2011-01-01

Pancreatic fistula is the most common complication following distal pancreatectomy. We have developed a fibrin adhesive sealing method which covers the cut surface and parenchyma of the pancreas, to prevent pancreatic fistula. We performed 25 distal pancreatectomies. Fibrin adhesive (TachoComb) was applied to the staple line of the pancreas before stapling. Pancreatic fistula was defined and graded according to the International Study Group of Postoperative Pancreatic Fistula (ISGPF) definition. The overall incidence of pancreatic fistula was five cases (20%). Four cases (16%) were classified as Grade A. Only one case (4%) was classified as Grade B. In patients with or without pancreatic fistula, the mean length of postoperative hospital stay was not significant. The fibrin adhesive sealing method is a simple and effective method of preventing postoperative pancreatic fistula formation after distal pancreatectomy.

Making a Case for Case-Based Teaching in Data Literacy

ERIC Educational Resources Information Center

Riddle, Derek R.; Beck, Jori S.; Morgan, Joseph John; Brown, Nancy; Whitesides, Heather

2017-01-01

Building on a study conducted by the authors, this article provides strategies for teaching data literacy and outlines the case-based teaching method as an effective way of developing data-literate teachers.

Rupture Dynamics Simulation for Non-Planar fault by a Curved Grid Finite Difference Method

NASA Astrophysics Data System (ADS)

Zhang, Z.; Zhu, G.; Chen, X.

2011-12-01

We first implement the non-staggered finite difference method to solve the dynamic rupture problem, with split-node, for non-planar fault. Split-node method for dynamic simulation has been used widely, because of that it's more precise to represent the fault plane than other methods, for example, thick fault, stress glut and so on. The finite difference method is also a popular numeric method to solve kinematic and dynamic problem in seismology. However, previous works focus most of theirs eyes on the staggered-grid method, because of its simplicity and computational efficiency. However this method has its own disadvantage comparing to non-staggered finite difference method at some fact for example describing the boundary condition, especially the irregular boundary, or non-planar fault. Zhang and Chen (2006) proposed the MacCormack high order non-staggered finite difference method based on curved grids to precisely solve irregular boundary problem. Based upon on this non-staggered grid method, we make success of simulating the spontaneous rupture problem. The fault plane is a kind of boundary condition, which could be irregular of course. So it's convinced that we could simulate rupture process in the case of any kind of bending fault plane. We will prove this method is valid in the case of Cartesian coordinate first. In the case of bending fault, the curvilinear grids will be used.

Confidence intervals for single-case effect size measures based on randomization test inversion.

PubMed

Michiels, Bart; Heyvaert, Mieke; Meulders, Ann; Onghena, Patrick

2017-02-01

In the current paper, we present a method to construct nonparametric confidence intervals (CIs) for single-case effect size measures in the context of various single-case designs. We use the relationship between a two-sided statistical hypothesis test at significance level α and a 100 (1 - α) % two-sided CI to construct CIs for any effect size measure θ that contain all point null hypothesis θ values that cannot be rejected by the hypothesis test at significance level α. This method of hypothesis test inversion (HTI) can be employed using a randomization test as the statistical hypothesis test in order to construct a nonparametric CI for θ. We will refer to this procedure as randomization test inversion (RTI). We illustrate RTI in a situation in which θ is the unstandardized and the standardized difference in means between two treatments in a completely randomized single-case design. Additionally, we demonstrate how RTI can be extended to other types of single-case designs. Finally, we discuss a few challenges for RTI as well as possibilities when using the method with other effect size measures, such as rank-based nonoverlap indices. Supplementary to this paper, we provide easy-to-use R code, which allows the user to construct nonparametric CIs according to the proposed method.

Additive Partial Least Squares for efficient modelling of independent variance sources demonstrated on practical case studies.

PubMed

Luoma, Pekka; Natschläger, Thomas; Malli, Birgit; Pawliczek, Marcin; Brandstetter, Markus

2018-05-12

A model recalibration method based on additive Partial Least Squares (PLS) regression is generalized for multi-adjustment scenarios of independent variance sources (referred to as additive PLS - aPLS). aPLS allows for effortless model readjustment under changing measurement conditions and the combination of independent variance sources with the initial model by means of additive modelling. We demonstrate these distinguishing features on two NIR spectroscopic case-studies. In case study 1 aPLS was used as a readjustment method for an emerging offset. The achieved RMS error of prediction (1.91 a.u.) was of similar level as before the offset occurred (2.11 a.u.). In case-study 2 a calibration combining different variance sources was conducted. The achieved performance was of sufficient level with an absolute error being better than 0.8% of the mean concentration, therefore being able to compensate negative effects of two independent variance sources. The presented results show the applicability of the aPLS approach. The main advantages of the method are that the original model stays unadjusted and that the modelling is conducted on concrete changes in the spectra thus supporting efficient (in most cases straightforward) modelling. Additionally, the method is put into context of existing machine learning algorithms. Copyright © 2018 Elsevier B.V. All rights reserved.

The Effects of Cognitive Conflict Management on Cognitive Development and Science Achievement

ERIC Educational Resources Information Center

Budiman, Zainol Badli; Halim, Lilia; Mohd Meerah, Subahan; Osman, Kamisah

2014-01-01

Three teaching methods were compared in this study, namely a Cognitive Conflict Management Module (CCM) that is infused into Cognitive Acceleration through Science Education (CASE), (Module A) CASE without CCM (Module B) and a conventional teaching method. This study employed a pre- and post-test quasi-experimental design using non-equivalent…

Time Evolution of the Dynamical Variables of a Stochastic System.

ERIC Educational Resources Information Center

de la Pena, L.

1980-01-01

By using the method of moments, it is shown that several important and apparently unrelated theorems describing average properties of stochastic systems are in fact particular cases of a general law; this method is applied to generalize the virial theorem and the fluctuation-dissipation theorem to the time-dependent case. (Author/SK)

Strategic Management: An Evaluation of the Use of Three Learning Methods.

ERIC Educational Resources Information Center

Jennings, David

2002-01-01

A study of 46 management students compared three methods for learning strategic management: cases, simulation, and action learning through consulting projects. Simulation was superior to action learning on all outcomes and equal or superior to cases on two. Simulation gave students a central role in management and greater control of the learning…

Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

ERIC Educational Resources Information Center

Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

2016-01-01

Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

Words Speak Louder than Action?: A Mixed-Methods Case Study

ERIC Educational Resources Information Center

Vincent, Stacy K.; Kirby, Andrea T.

2015-01-01

The purpose of this mixed-methods case study was to examine the dynamic of Culturally Responsive Pedagogy (Gay, 2010) among nine secondary agriculture teachers in ethnically diverse schools. By reviewing the diversity of student enrollment in the agriculture programs, the participants were separated by two groups: diverse and non-diverse. A hybrid…

48 CFR 952.227-13 - Patent rights-acquisition by the Government.

Code of Federal Regulations, 2011 CFR

2011-10-01

... a process or method; or to operate, in the case of a machine or system; and, in each case, under... procedures. (2) If the Contracting Officer learns of an unreported Contractor invention which the Contracting... upon the practice of any specific process, method, machine, manufacture, or composition of matter...

48 CFR 952.227-13 - Patent rights-acquisition by the Government.

Code of Federal Regulations, 2010 CFR

2010-10-01

... a process or method; or to operate, in the case of a machine or system; and, in each case, under... procedures. (2) If the Contracting Officer learns of an unreported Contractor invention which the Contracting... upon the practice of any specific process, method, machine, manufacture, or composition of matter...

Case Series: Mental Health Needs and Perspectives of Rural Children Reared by Parents Who Abuse Methamphetamine

ERIC Educational Resources Information Center

Ostler, Teresa; Haight, Wendy; Black, James; Choi, Ga-Young; Kingery, Linda; Sheridan, Kathryn

2007-01-01

Objective: This case-based, mixed-methods study was undertaken to understand the perspectives and mental health needs of rural children exposed to parental methamphetamine abuse. Method: Participants were 23 children involved with a state child protective agency because of parental methamphetamine abuse. A semistructured interview provided…

Methods and Case Studies for Teaching and Learning about Failure and Safety.

ERIC Educational Resources Information Center

Bignell, Victor

1999-01-01

Discusses methods for analyzing case studies of failures of technological systems. Describes two distance learning courses that compare standard models of failure and success with the actuality of given scenarios. Provides teaching and learning materials and information sources for application to aspects of design, manufacture, inspection, use,…

Utilizing the Peer Group Method with Case Studies to Teach Pharmacokinetics.

ERIC Educational Resources Information Center

Sims, Pamela J.

1994-01-01

A pharmacy school large-group (110 students) course in pharmacokinetics was designed to incorporate small-group team-based problem solving. The method allows students to learn material through traditional lecture, research the topic further, discuss the information gained, and apply the learning to specific cases in a manner that promotes…

Teaching with the Case Method Online: Pure versus Hybrid Approaches

ERIC Educational Resources Information Center

Webb, Harold W.; Gill, Grandon; Poe, Gary

2005-01-01

The impact of hybrid classroom/distance education approaches is examined in the context of the case method. Four distinct semester-long treatments, which varied mixes of classroom and online discussion, were used to teach a graduate MIS survey course. Specific findings suggest that by using Web technology, college instructors may offer students…

Preparing Preservice Teachers in a Virtual Space: A Case Study of a Literacy Methods Course

ERIC Educational Resources Information Center

Fayne, Harriet R.

2014-01-01

This article describes a case study of an online literacy methods course offered at a small, midwestern university. Formal and informal instruments were used to assess students' backgrounds, interests, and dispositions. Archival course data were analyzed to examine interactions among content, course design, and student characteristics. Despite…

A Comparison of Rubrics for Identifying Empirically Supported Practices with Single-Case Research

ERIC Educational Resources Information Center

Maggin, Daniel M.; Briesch, Amy M.; Chafouleas, Sandra M.; Ferguson, Tyler D.; Clark, Courtney

2014-01-01

The use of single-case research methods for validating academic and behavioral interventions has gained considerable attention in recent years. As such, there has been a proliferation of methods for evaluating whether, and to what extent, primary research reports provide evidence of intervention effectiveness. Despite the recent interest in…

Evaluation of a Multi-Case Participatory Action Research Project: The Case of SOLINSA

ERIC Educational Resources Information Center

Home, Robert; Rump, Niels

2015-01-01

Purpose: Scholars agree that evaluation of participatory action research is inherently valuable; however there have been few attempts at evaluating across methods and across interventions because the perceived success of a method is affected by context, researcher skills and the aims of the participants. This paper describes the systematic…

48 CFR 952.227-13 - Patent rights-acquisition by the Government.

Code of Federal Regulations, 2014 CFR

2014-10-01

... a process or method; or to operate, in the case of a machine or system; and, in each case, under... procedures. (2) If the Contracting Officer learns of an unreported Contractor invention which the Contracting... upon the practice of any specific process, method, machine, manufacture, or composition of matter...

48 CFR 952.227-13 - Patent rights-acquisition by the Government.

Code of Federal Regulations, 2013 CFR

2013-10-01

... a process or method; or to operate, in the case of a machine or system; and, in each case, under... procedures. (2) If the Contracting Officer learns of an unreported Contractor invention which the Contracting... upon the practice of any specific process, method, machine, manufacture, or composition of matter...

48 CFR 952.227-13 - Patent rights-acquisition by the Government.

Code of Federal Regulations, 2012 CFR

2012-10-01

... a process or method; or to operate, in the case of a machine or system; and, in each case, under... procedures. (2) If the Contracting Officer learns of an unreported Contractor invention which the Contracting... upon the practice of any specific process, method, machine, manufacture, or composition of matter...

Multiple-mode nonlinear free and forced vibrations of beams using finite element method

NASA Technical Reports Server (NTRS)

Mei, Chuh; Decha-Umphai, Kamolphan

1987-01-01

Multiple-mode nonlinear free and forced vibration of a beam is analyzed by the finite element method. The geometric nonlinearity is investigated. Inplane displacement and inertia (IDI) are also considered in the formulation. Harmonic force matrix is derived and explained. Nonlinear free vibration can be simply treated as a special case of the general forced vibration by setting the harmonic force matrix equal to zero. The effect of the higher modes is more pronouced for the clamped supported beam than the simply supported one. Beams without IDI yield more effect of the higher modes than the one with IDI. The effects of IDI are to reduce nonlinearity. For beams with end supports restrained from axial movement (immovable cases), only the hardening type nonlinearity is observed. However, beams of small slenderness ratio (L/R = 20) with movable end supports, the softening type nonlinearity is found. The concentrated force case yields a more severe response than the uniformly distributed force case. Finite element results are in good agreement with the solution of simple elliptic response, harmonic balance method, and Runge-Kutte method and experiment.

A content-boosted collaborative filtering algorithm for personalized training in interpretation of radiological imaging.

PubMed

Lin, Hongli; Yang, Xuedong; Wang, Weisheng

2014-08-01

Devising a method that can select cases based on the performance levels of trainees and the characteristics of cases is essential for developing a personalized training program in radiology education. In this paper, we propose a novel hybrid prediction algorithm called content-boosted collaborative filtering (CBCF) to predict the difficulty level of each case for each trainee. The CBCF utilizes a content-based filtering (CBF) method to enhance existing trainee-case ratings data and then provides final predictions through a collaborative filtering (CF) algorithm. The CBCF algorithm incorporates the advantages of both CBF and CF, while not inheriting the disadvantages of either. The CBCF method is compared with the pure CBF and pure CF approaches using three datasets. The experimental data are then evaluated in terms of the MAE metric. Our experimental results show that the CBCF outperforms the pure CBF and CF methods by 13.33 and 12.17 %, respectively, in terms of prediction precision. This also suggests that the CBCF can be used in the development of personalized training systems in radiology education.

Psychological Intervention: Case Studies in School Psychological Services, Volume 3, 1979.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Div. of Pupil Personnel Services.

The book presents 27 case studies illustrating psychological interventions with behavior problem school children. Studies ususally introduce the target population, describe the method of psychological evaluation, report the results of treatment, and discuss the case's implications. Among cases reported are investigations of stimulant medication on…

A Randomized Controlled Trial of Consensus-Based Child Abuse Case Management

ERIC Educational Resources Information Center

Goldbeck, L.; Laib-Koehnemund, A.; Fegert, J. M.

2007-01-01

Objective: This study evaluates the effects of expert-assisted child abuse and neglect case management in the German child welfare and healthcare system as perceived by the case workers themselves. Methods: Case workers with different professions (social workers, counselors, clinic-based and office-based psychotherapists, and physicians)…

The Effects of Instructional Implementation on Learning with Interactive Multimedia Case-Based Instruction

ERIC Educational Resources Information Center

Mitchem, Katherine; Koury, Kevin; Fitzgerald, Gail; Hollingsead, Candice; Miller, Kevin; Tsai, Hui-Hsien; Zha, Shenghua

2009-01-01

Interactive, multimedia cases with technology supports present new ways of teaching and learning in teacher education. In this mixed-methods, naturalistic study, the authors investigate how and what participants learn from multimedia cases and, in particular, how instructional implementation affects learning outcomes from multimedia cases.…

The application of systems thinking concepts, methods, and tools to global health practices: An analysis of case studies.

PubMed

Wilkinson, Jessica; Goff, Morgan; Rusoja, Evan; Hanson, Carl; Swanson, Robert Chad

2018-06-01

This review of systems thinking (ST) case studies seeks to compile and analyse cases from ST literature and provide practitioners with a reference for ST in health practice. Particular attention was given to (1) reviewing the frequency and use of key ST terms, methods, and tools in the context of health, and (2) extracting and analysing longitudinal themes across cases. A systematic search of databases was conducted, and a total of 36 case studies were identified. A combination of integrative and inductive qualitative approaches to analysis was used. Most cases identified took place in high-income countries and applied ST retrospectively. The most commonly used ST terms were agent/stakeholder/actor (n = 29), interdependent/interconnected (n = 28), emergence (n = 26), and adaptability/adaptation (n = 26). Common ST methods and tools were largely underutilized. Social network analysis was the most commonly used method (n = 4), and innovation or change management history was the most frequently used tool (n = 11). Four overarching themes were identified; the importance of the interdependent and interconnected nature of a health system, characteristics of leaders in a complex adaptive system, the benefits of using ST, and barriers to implementing ST. This review revealed that while much has been written about the potential benefits of applying ST to health, it has yet to completely transition from theory to practice. There is however evidence of the practical use of an ST lens as well as specific methods and tools. With clear examples of ST applications, the global health community will be better equipped to understand and address key health challenges. © 2017 John Wiley & Sons, Ltd.

A comparison of estimators from self-controlled case series, case-crossover design, and sequence symmetry analysis for pharmacoepidemiological studies.

PubMed

Takeuchi, Yoshinori; Shinozaki, Tomohiro; Matsuyama, Yutaka

2018-01-08

Despite the frequent use of self-controlled methods in pharmacoepidemiological studies, the factors that may bias the estimates from these methods have not been adequately compared in real-world settings. Here, we comparatively examined the impact of a time-varying confounder and its interactions with time-invariant confounders, time trends in exposures and events, restrictions, and misspecification of risk period durations on the estimators from three self-controlled methods. This study analyzed self-controlled case series (SCCS), case-crossover (CCO) design, and sequence symmetry analysis (SSA) using simulated and actual electronic medical records datasets. We evaluated the performance of the three self-controlled methods in simulated cohorts for the following scenarios: 1) time-invariant confounding with interactions between the confounders, 2) time-invariant and time-varying confounding without interactions, 3) time-invariant and time-varying confounding with interactions among the confounders, 4) time trends in exposures and events, 5) restricted follow-up time based on event occurrence, and 6) patient restriction based on event history. The sensitivity of the estimators to misspecified risk period durations was also evaluated. As a case study, we applied these methods to evaluate the risk of macrolides on liver injury using electronic medical records. In the simulation analysis, time-varying confounding produced bias in the SCCS and CCO design estimates, which aggravated in the presence of interactions between the time-invariant and time-varying confounders. The SCCS estimates were biased by time trends in both exposures and events. Erroneously short risk periods introduced bias to the CCO design estimate, whereas erroneously long risk periods introduced bias to the estimates of all three methods. Restricting the follow-up time led to severe bias in the SSA estimates. The SCCS estimates were sensitive to patient restriction. The case study showed that although macrolide use was significantly associated with increased liver injury occurrence in all methods, the value of the estimates varied. The estimations of the three self-controlled methods depended on various underlying assumptions, and the violation of these assumptions may cause non-negligible bias in the resulting estimates. Pharmacoepidemiologists should select the appropriate self-controlled method based on how well the relevant key assumptions are satisfied with respect to the available data.

Systemic Sclerosis Classification Criteria: Developing methods for multi-criteria decision analysis with 1000Minds

PubMed Central

Johnson, Sindhu R.; Naden, Raymond P.; Fransen, Jaap; van den Hoogen, Frank; Pope, Janet E.; Baron, Murray; Tyndall, Alan; Matucci-Cerinic, Marco; Denton, Christopher P.; Distler, Oliver; Gabrielli, Armando; van Laar, Jacob M.; Mayes, Maureen; Steen, Virginia; Seibold, James R.; Clements, Phillip; Medsger, Thomas A.; Carreira, Patricia E.; Riemekasten, Gabriela; Chung, Lorinda; Fessler, Barri J.; Merkel, Peter A.; Silver, Richard; Varga, John; Allanore, Yannick; Mueller-Ladner, Ulf; Vonk, Madelon C.; Walker, Ulrich A.; Cappelli, Susanna; Khanna, Dinesh

2014-01-01

Objective Classification criteria for systemic sclerosis (SSc) are being developed. The objectives were to: develop an instrument for collating case-data and evaluate its sensibility; use forced-choice methods to reduce and weight criteria; and explore agreement between experts on the probability that cases were classified as SSc. Study Design and Setting A standardized instrument was tested for sensibility. The instrument was applied to 20 cases covering a range of probabilities that each had SSc. Experts rank-ordered cases from highest to lowest probability; reduced and weighted the criteria using forced-choice methods; and re-ranked the cases. Consistency in rankings was evaluated using intraclass correlation coefficients (ICC). Results Experts endorsed clarity (83%), comprehensibility (100%), face and content validity (100%). Criteria were weighted (points): finger skin thickening (14–22), finger-tip lesions (9–21), friction rubs (21), finger flexion contractures (16), pulmonary fibrosis (14), SSc-related antibodies (15), Raynaud’s phenomenon (13), calcinosis (12), pulmonary hypertension (11), renal crisis (11), telangiectasia (10), abnormal nailfold capillaries (10), esophageal dilation (7) and puffy fingers (5). The ICC across experts was 0.73 (95%CI 0.58,0.86) and improved to 0.80 (95%CI 0.68,0.90). Conclusions Using a sensible instrument and forced-choice methods, the number of criteria were reduced by 39% (23 to 14) and weighted. Our methods reflect the rigors of measurement science, and serves as a template for developing classification criteria. PMID:24721558

Contrasting RCC, RVU, and ABC for managed care decisions. A case study compares three widely used costing methods and finds one superior.

PubMed

West, T D; Balas, E A; West, D A

1996-08-01

To obtain cost data needed to improve managed care decisions and negotiate profitable capitation contracts, most healthcare provider organizations use one of three costing methods: the ratio-of-costs-to-charges method, the relative value unit method, or the activity-based costing method. Although the ratio-of-costs to charges is used by a majority of provider organizations, a case study that applied these three methods in a renal dialysis clinic found that the activity-based costing method provided the most accurate cost data. By using this costing method, healthcare financial managers can obtain the data needed to make optimal decisions regarding resource allocation and cost containment, thus assuring the longterm financial viability of their organizations.

Metrics in method engineering

NASA Astrophysics Data System (ADS)

Brinkkemper, S.; Rossi, M.

1994-12-01

As customizable computer aided software engineering (CASE) tools, or CASE shells, have been introduced in academia and industry, there has been a growing interest into the systematic construction of methods and their support environments, i.e. method engineering. To aid the method developers and method selectors in their tasks, we propose two sets of metrics, which measure the complexity of diagrammatic specification techniques on the one hand, and of complete systems development methods on the other hand. Proposed metrics provide a relatively fast and simple way to analyze the technique (or method) properties, and when accompanied with other selection criteria, can be used for estimating the cost of learning the technique and the relative complexity of a technique compared to others. To demonstrate the applicability of the proposed metrics, we have applied them to 34 techniques and 15 methods.

Two Reconfigurable Flight-Control Design Methods: Robust Servomechanism and Control Allocation

NASA Technical Reports Server (NTRS)

Burken, John J.; Lu, Ping; Wu, Zheng-Lu; Bahm, Cathy

2001-01-01

Two methods for control system reconfiguration have been investigated. The first method is a robust servomechanism control approach (optimal tracking problem) that is a generalization of the classical proportional-plus-integral control to multiple input-multiple output systems. The second method is a control-allocation approach based on a quadratic programming formulation. A globally convergent fixed-point iteration algorithm has been developed to make onboard implementation of this method feasible. These methods have been applied to reconfigurable entry flight control design for the X-33 vehicle. Examples presented demonstrate simultaneous tracking of angle-of-attack and roll angle commands during failures of the fight body flap actuator. Although simulations demonstrate success of the first method in most cases, the control-allocation method appears to provide uniformly better performance in all cases.

Convergence of methods for coupling of microscopic and mesoscopic reaction-diffusion simulations

NASA Astrophysics Data System (ADS)

Flegg, Mark B.; Hellander, Stefan; Erban, Radek

2015-05-01

In this paper, three multiscale methods for coupling of mesoscopic (compartment-based) and microscopic (molecular-based) stochastic reaction-diffusion simulations are investigated. Two of the three methods that will be discussed in detail have been previously reported in the literature; the two-regime method (TRM) and the compartment-placement method (CPM). The third method that is introduced and analysed in this paper is called the ghost cell method (GCM), since it works by constructing a "ghost cell" in which molecules can disappear and jump into the compartment-based simulation. Presented is a comparison of sources of error. The convergent properties of this error are studied as the time step Δt (for updating the molecular-based part of the model) approaches zero. It is found that the error behaviour depends on another fundamental computational parameter h, the compartment size in the mesoscopic part of the model. Two important limiting cases, which appear in applications, are considered: Δt → 0 and h is fixed; Δt → 0 and h → 0 such that √{ Δt } / h is fixed. The error for previously developed approaches (the TRM and CPM) converges to zero only in the limiting case (ii), but not in case (i). It is shown that the error of the GCM converges in the limiting case (i). Thus the GCM is superior to previous coupling techniques if the mesoscopic description is much coarser than the microscopic part of the model.

Utility of a novel error-stepping method to improve gradient-based parameter identification by increasing the smoothness of the local objective surface: a case-study of pulmonary mechanics.

PubMed

Docherty, Paul D; Schranz, Christoph; Chase, J Geoffrey; Chiew, Yeong Shiong; Möller, Knut

2014-05-01

Accurate model parameter identification relies on accurate forward model simulations to guide convergence. However, some forward simulation methodologies lack the precision required to properly define the local objective surface and can cause failed parameter identification. The role of objective surface smoothness in identification of a pulmonary mechanics model was assessed using forward simulation from a novel error-stepping method and a proprietary Runge-Kutta method. The objective surfaces were compared via the identified parameter discrepancy generated in a Monte Carlo simulation and the local smoothness of the objective surfaces they generate. The error-stepping method generated significantly smoother error surfaces in each of the cases tested (p<0.0001) and more accurate model parameter estimates than the Runge-Kutta method in three of the four cases tested (p<0.0001) despite a 75% reduction in computational cost. Of note, parameter discrepancy in most cases was limited to a particular oblique plane, indicating a non-intuitive multi-parameter trade-off was occurring. The error-stepping method consistently improved or equalled the outcomes of the Runge-Kutta time-integration method for forward simulations of the pulmonary mechanics model. This study indicates that accurate parameter identification relies on accurate definition of the local objective function, and that parameter trade-off can occur on oblique planes resulting prematurely halted parameter convergence. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

[Use of Plusoptix as a screening method for refractive ambliopia].

PubMed

Bogdănici, T; Tone, Silvia; Miron, Mihaela; Boboc, Mihaela; Bogdănici, Camelia

2012-01-01

Highlighting the differences in the objective refraction using the Plusoptix AO9 comparing them with the refraction performed with TOPCON KR-8900 autorefractor. Prospective study for 3 months held in the Ophthalmology Clinic in Iasi, Hospital Sf. Spiridon on a total of 39 children (21 girls and 18 boys) with mean age of 10.61 +/- 5.67 years. Clinical parameters: sex, age, objective refraction obtained with Plusoptix and with autorefractor corrected visual acuity (with different methods depending on each patient age), ortoptic examination (strabic deviation, binocular vision), the presence of symetry/asymetry while measuring with Plusoptix. The results were statistically processed by F-TEST calculating the correlation coefficient, standard deviation, significance level (using the spherical equivalent of the obtained values). Age limits of the studied cases ranged between 2-23 years. Visual acuity of children who had cooperate was between 0.2-1 with correction, achieving best values on right eye than left eye. 8 cases (20.51%) had large differences between measurements made with Plusoptix and autorefractor, half of that (4 cases) had strabismus. Three of these cases were with small hypermetropia and one with small myopia (Plusoptix shows a lower value). In 2 cases occurred higher differences (about 2-2,5D) between the 2 measurements, in patients with average hypermetropia. Plusoptix refraction was not possible at high hypermetropia or high myopia. This type of determining objective refraction using Plusoptix is a useful method of screening for discovery of refractive errors that can cause refractive amblyopia in young children and in those cases with a difficult collaboration. Because there are differences betweeti this 2 methods, for children with refractive errors are recommended further exploration to determine the appropriate optical correction. Plusoptix is a limited method because it cannot detect the exact values in those cases with high hypermetropia or high myopia.

Calculation of forces on magnetized bodies using COSMIC NASTRAN

NASA Technical Reports Server (NTRS)

Sheerer, John

1987-01-01

The methods described may be used with a high degree of confidence for calculations of magnetic traction forces normal to a surface. In this circumstance all models agree, and test cases have resulted in theoretically correct results. It is shown that the tangential forces are in practice negligible. The surface pole method is preferable to the virtual work method because of the necessity for more than one NASTRAN run in the latter case, and because distributed forces are obtained. The derivation of local forces from the Maxwell stress method involves an undesirable degree of manipulation of the problem and produces a result in contradiction of the surface pole method.

Casuistry and principlism: the convergence of method in biomedical ethics.

PubMed

Kuczewski, M

1998-12-01

Casuistry and principlism are two of the leading contenders to be considered the methodology of bioethics. These methods may be incommensurable since the former emphasizes the examination of cases while the latter focuses on moral principles. Conversely, since both analyze cases in terms of mid-level principles, there is hope that these methods may be reconcilable or complementary. I analyze the role of principles in each and thereby show that these theories are virtually identical when interpreted in a certain light. That is, if the gaps in each method are filled by a concept of judgment or Aristotelian practical wisdom, these methods converge.

[Comparison of external fixation with or without limited internal fixation for open knee fractures].

PubMed

Li, K N; Lan, H; He, Z Y; Wang, X J; Yuan, J; Zhao, P; Mu, J S

2018-03-01

Objective: To explore the characteristics and methods of different fixation methods and prevention of open knee joint fracture. Methods: The data of 86 cases of open knee joint fracture admitted from January 2002 to December 2015 in Department of Orthopaedics, Affiliated Hospital of Chengdu University were analyzed retrospectively.There were 65 males and 21 females aged of 38.6 years. There were 38 cases treated with trans articular external fixation alone, 48 cases were in the trans articular external fixation plus auxiliary limited internal fixation group. All the patients were treated according to the same three stages except for different fixation methods. Observation of external fixation and fracture fixation, fracture healing, wound healing and treatment, treatment and related factors of infection control and knee function recovery. χ(2) test was used to analyze data. Results: Eleven patients had primary wound healing, accounting for 12.8%. Seventy-five patients had two wounds healed, accounting for 87.2%. Only 38 cases of trans articular external fixator group had 31 cases of articular surface reduction, accounting for 81.6%; Five cases of trans articular external fixator assisted limited internal fixation group had 5 cases of poor reduction, accounting for 10.4%; There was significant difference between the two groups (χ(2)=44.132, P <0.05). Take a single cross joint external fixation group, a total of 23 cases of patients with infection, accounted for 60.5% of external fixation group; trans articular external fixation assisted limited internal fixation group there were 30 cases of patients with infection, accounting for the assistance of external fixator and limited internal fixation group 62.5%; There was significant difference between the two groups(χ(2)=0.035, P >0.05). Five cases of fracture nonunion cases of serious infection, patients voluntarily underwent amputation. The Lysholm Knee Scale: In the external fixation group, 23 cases were less than 50 points, accounting for 60.5%, 15 cases were more than 50 points, accounting for 39.5%, external fixation and limited internal fixation group 20 cases were less than 50 points, accounting for 41.7%, 28 cases were more than 50 points, accounting for 58.3%; There was significant difference between the two groups(χ(2)=1.279, P >0.05). Conclusions: Prevention and control of infection is a central link in the treatment of open fracture of the knee. Trans articular external fixator plus limited internal fixation is an important measure to treat open fracture of the knee-joint.

A robust, finite element model for hydrostatic surface water flows

USGS Publications Warehouse

Walters, R.A.; Casulli, V.

1998-01-01

A finite element scheme is introduced for the 2-dimensional shallow water equations using semi-implicit methods in time. A semi-Lagrangian method is used to approximate the effects of advection. A wave equation is formed at the discrete level such that the equations decouple into an equation for surface elevation and a momentum equation for the horizontal velocity. The convergence rates and relative computational efficiency are examined with the use of three test cases representing various degrees of difficulty. A test with a polar-quadrant grid investigates the response to local grid-scale forcing and the presence of spurious modes, a channel test case establishes convergence rates, and a field-scale test case examines problems with highly irregular grids.A finite element scheme is introduced for the 2-dimensional shallow water equations using semi-implicit methods in time. A semi-Lagrangian method is used to approximate the effects of advection. A wave equation is formed at the discrete level such that the equations decouple into an equation for surface elevation and a momentum equation for the horizontal velocity. The convergence rates and relative computational efficiency are examined with the use of three test cases representing various degrees of difficulty. A test with a polar-quadrant grid investigates the response to local grid-scale forcing and the presence of spurious modes, a channel test case establishes convergence rates, and a field-scale test case examines problems with highly irregular grids.

[Histopathological Diagnosis of Invasive Fungal Infections in Formalin-Fixed and Paraffin-Embedded Tissues in Conjunction with Molecular Methods].

PubMed

Shinozaki, Minoru; Tochigi, Naobumi; Sadamoto, Sota; Yamagata Murayama, Somay; Wakayama, Megumi; Nemoto, Tetsuo

2018-01-01

The main objective of this study was to evaluate the relationship between histopathology, polymerase chain reaction (PCR), and in situ hybridization (ISH) for the identification of causative fungi in formalin-fixed and paraffin-embedded (FFPE) tissue specimens. Since pathogenic fungi in tissue specimens can be difficult to identify morphologically, PCR and ISH have been usually employed as auxiliary procedures. However, little comparison has been made on the sensitivity and specificity of PCR and ISH using FFPE specimens. Therefore, to compare and clarify the reproducibility and usefulness of PCR and ISH as auxiliary procedures for histological identification, we performed histopathological review, PCR assays, and ISH to identify pathogenic fungi in 59 FFPE tissue specimens obtained from 49 autopsies. The following are the main findings for this retrospective review: i) even for cases classified as "mold not otherwise specified" (MNOS), two cases could be identified as Aspergillus species by molecular methods; ii) all cases classified as non-zygomycetes mold (NZM) were Aspergillus species and were not identified by molecular methods as other fungi; iii) all 3 cases classified as zygomycetes mold (ZM) could be identified by molecular methods as Mucorales; iv) except for 1 case identified by molecular methods as Trichosporon spp., 5 cases were originally identified as dimorphic yeast (DY). As a measure of nucleic acid integrity, PCR and ISH successfully detected human and fungal nucleic acids in approximately 60% of the specimens. Detection of Aspergillus DNA by nested PCR assay and by ISH against the A. fumigatus ALP gene were similarly sensitive and significant (p<0.01). Thus, our findings demonstrated the potential risk of error in the classification of fungi based on pathological diagnosis. Combining molecular methods such as ISH and PCR on FFPE specimens with pathological diagnosis should improve diagnostic accuracy of fungal infection.

Numerical simulation on casing modification of a boiler water circulation pump

NASA Astrophysics Data System (ADS)

Li, Y. Z.; Fan, Y. Z.; Liu, S. H.; Wu, Y. L.; Zuo, Z. G.

2012-11-01

In this paper, hydraulic performance comparisons are made by numerical simulation method on boiler water circulation pump with casings of different shapes. The existing pump adopts a semispherical casing and a garlic-shaped casing. Results show that in the garlic-shaped casing noticeable swirling vortex can be found in the top region of the discharge nozzle, and semispherical casing has better performance in hydraulic efficiency and head.

What is case management in palliative care? An expert panel study

PubMed Central

2012-01-01

Background Case management is a heterogeneous concept of care that consists of assessment, planning, implementing, coordinating, monitoring, and evaluating the options and services required to meet the client's health and service needs. This paper describes the result of an expert panel procedure to gain insight into the aims and characteristics of case management in palliative care in the Netherlands. Methods A modified version of the RAND®/University of California at Los Angeles (UCLA) appropriateness method was used to formulate and rate a list of aims and characteristics of case management in palliative care. A total of 76 health care professionals, researchers and policy makers were invited to join the expert panel, of which 61% participated in at least one round. Results Nine out of ten aims of case management were met with agreement. The most important areas of disagreement with regard to characteristics of case management were hands-on nursing care by the case manager, target group of case management, performance of other tasks besides case management and accessibility of the case manager. Conclusions Although aims are agreed upon, case management in palliative care shows a high level of variability in implementation choices. Case management should aim at maintaining continuity of care to ensure that patients and those close to them experience care as personalised, coherent and consistent. PMID:22709349

Prospects and Problems of Transferring Quality-Improvement Methods from Health Care to Social Services: Two Case Studies

PubMed Central

Neubeck, Truls; Elg, Mattias; Schneider, Thomas; Andersson-Gäre, Boel

2014-01-01

Introduction: This study examines the use of quality-improvement (QI) methods in social services. Particularly the key aspects—generalizable knowledge, interprofessional teamwork, and measurements—are studied in projects from the QI program Forum for Values in Sweden. Methods: This is a mixed-method case study. Two projects using standard QI methods and tools as used in health care were chosen as critical cases to highlight some problems and prospects with the use of QI in social services. The cases were analyzed through documented results and qualitative interviews with participants one year after the QI projects ended. Results: The social service QI projects led to measurable improvements when they used standard methods and tools for QI in health care. One year after the projects, the improvements were either not continuously measured or not reported in any infrastructure for measurements. The study reveals that social services differ from health care regarding the availability and use of evidence, the role of professional expertise, and infrastructure for measurements. Conclusions: We argue that QI methods as used in health care are applicable in social services and can lead to measurable improvements. The study gives valuable insights for QI, not only in social services but also in health care, on how to assess and sustain improvements when infrastructures for measurements are lacking. In addition, when one forms QI teams, the focus should be on functions instead of professions, and QI methods can be used to support implementation of evidence-based practice. PMID:24867549

Rapid epidemiologic assessment of glucose-6-phosphate dehydrogenase deficiency in malaria-endemic areas in Southeast Asia using a novel diagnostic kit.

PubMed

Jalloh, A; Tantular, I S; Pusarawati, S; Kawilarang, A P; Kerong, H; Lin, K; Ferreira, M U; Matsuoka, H; Arai, M; Kita, K; Kawamoto, F

2004-05-01

We recently reported a new rapid screening method for glucose-6-phosphate dehydrogenase (G6PD) deficiency. This method incorporates a new formazan substrate (WST-8) and is capable of detecting heterozygous females both qualitatively and quantitatively. Here, we report its evaluation during field surveys at three malaria centres and in malaria-endemic villages of Myanmar and Indonesia, either alone or in combination with a rapid on-site diagnosis of malaria. A total of 57 severe (45 males and 12 females) and 34 mild (five males and 29 females) cases of G6PD deficiency were detected among 855 subjects in Myanmar whilst 30 severe (25 males and five females) and 23 mild (six males and 17 females) cases were found among 1286 subjects in Indonesia. In all cases, severe deficiency was confirmed with another formazan method but due to limitations in its detection threshold, mild cases were misdiagnosed as G6PD-normal by this latter method. Our results indicate that the novel method can qualitatively detect both severely deficient subjects as well as heterozygous females in the field. The antimalarial drug, primaquine, was safely prescribed to Plasmodium vivax-infected patients in Myanmar. Our new, rapid screening method may be essential for the diagnosis of G6PD deficiency particularly in rural areas without electricity, and can be recommended for use in malaria control programmes.

Piecewise exponential survival times and analysis of case-cohort data.

PubMed

Li, Yan; Gail, Mitchell H; Preston, Dale L; Graubard, Barry I; Lubin, Jay H

2012-06-15

Case-cohort designs select a random sample of a cohort to be used as control with cases arising from the follow-up of the cohort. Analyses of case-cohort studies with time-varying exposures that use Cox partial likelihood methods can be computer intensive. We propose a piecewise-exponential approach where Poisson regression model parameters are estimated from a pseudolikelihood and the corresponding variances are derived by applying Taylor linearization methods that are used in survey research. The proposed approach is evaluated using Monte Carlo simulations. An illustration is provided using data from the Alpha-Tocopherol, Beta-Carotene Cancer Prevention Study of male smokers in Finland, where a case-cohort study of serum glucose level and pancreatic cancer was analyzed. Copyright © 2012 John Wiley & Sons, Ltd.

Analysis of case-only studies accounting for genotyping error.

PubMed

Cheng, K F

2007-03-01

The case-only design provides one approach to assess possible interactions between genetic and environmental factors. It has been shown that if these factors are conditionally independent, then a case-only analysis is not only valid but also very efficient. However, a drawback of the case-only approach is that its conclusions may be biased by genotyping errors. In this paper, our main aim is to propose a method for analysis of case-only studies when these errors occur. We show that the bias can be adjusted through the use of internal validation data, which are obtained by genotyping some sampled individuals twice. Our analysis is based on a simple and yet highly efficient conditional likelihood approach. Simulation studies considered in this paper confirm that the new method has acceptable performance under genotyping errors.

An application of boundary element method calculations to hearing aid systems: The influence of the human head

NASA Astrophysics Data System (ADS)

Rasmussen, Karsten B.; Juhl, Peter

2004-05-01

Boundary element method (BEM) calculations are used for the purpose of predicting the acoustic influence of the human head in two cases. In the first case the sound source is the mouth and in the second case the sound is plane waves arriving from different directions in the horizontal plane. In both cases the sound field is studied in relation to two positions above the right ear being representative of hearing aid microphone positions. Both cases are relevant for hearing aid development. The calculations are based upon a direct BEM implementation in Matlab. The meshing is based on the original geometrical data files describing the B&K Head and Torso Simulator 4128 combined with a 3D scan of the pinna.

Case Study: Mini-Case Studies: Small Infusions of Active Learning for Large-Lecture Courses

ERIC Educational Resources Information Center

Carloye, Lisa

2017-01-01

In this article, the author introduces the usage of case studies to be an excellent method for engaging students through stories. The author notes she developed a series of mini-case studies that can be implemented, with a little advance preparation, within a 10- to 15-minute window during lecture. What makes them "mini" case studies?…

Promoting student case creation to enhance instruction of clinical reasoning skills: a pilot feasibility study.

PubMed

Chandrasekar, Hamsika; Gesundheit, Neil; Nevins, Andrew B; Pompei, Peter; Bruce, Janine; Merrell, Sylvia Bereknyei

2018-01-01

It is a common educational practice for medical students to engage in case-based learning (CBL) exercises by working through clinical cases that have been developed by faculty. While such faculty-developed exercises have educational strengths, there are at least two major drawbacks to learning by this method: the number and diversity of cases is often limited; and students decrease their engagement with CBL cases as they grow accustomed to the teaching method. We sought to explore whether student case creation can address both of these limitations. We also compared student case creation to traditional clinical reasoning sessions in regard to tutorial group effectiveness, perceived gains in clinical reasoning, and quality of student-faculty interaction. Ten first-year medical students participated in a feasibility study wherein they worked in small groups to develop their own patient case around a preassigned diagnosis. Faculty provided feedback on case quality afterwards. Students completed pre- and post-self-assessment surveys. Students and faculty also participated in separate focus groups to compare their case creation experience to traditional CBL sessions. Students reported high levels of team engagement and peer learning, as well as increased ownership over case content and understanding of clinical reasoning nuances. However, students also reported decreases in student-faculty interaction and the use of visual aids ( P < 0.05). The results of our feasibility study suggest that student-generated cases can be a valuable adjunct to traditional clinical reasoning instruction by increasing content ownership, encouraging student-directed learning, and providing opportunities to explore clinical nuances. However, these gains may reduce student-faculty interaction. Future studies may be able to identify an improved model of faculty participation, the ideal timing for incorporation of this method in a medical curriculum, and a more rigorous assessment of the impact of student case creation on the development of clinical reasoning skills.

Applying Real Options for Evaluating Investments in ERP Systems

NASA Astrophysics Data System (ADS)

Nakagane, Jun; Sekozawa, Teruji

This paper intends to verify effectiveness of real options approach for evaluating investments in Enterprise Resource Planning systems (ERP) and proves how important it is to disclose shadow options potentially embedded in ERP investment. The net present value (NPV) method is principally adopted to evaluate the value of ERP. However, the NPV method assumes no uncertainties exist in the object. It doesn't satisfy the current business circumstances which are filled with dynamic issues. Since the 1990s the effectiveness of option pricing models for Information System (IS) investment to solve issues in the NPV method has been discussed in the IS literature. This paper presents 3 business cases to review the practical advantages of such techniques for IS investments, especially ERP investments. The first case is EDI development. We evaluate the project by a new approach with lighting one of shadow options, EDI implementation. In the second case we reveal an ERP investment has an “expanding option” in a case of eliminating redundancy. The third case describes an option to contract which is deliberately slotted in ERP development to prepare transferring a manufacturing facility.

The Local Discontinuous Galerkin Method for Time-Dependent Convection-Diffusion Systems

NASA Technical Reports Server (NTRS)

Cockburn, Bernardo; Shu, Chi-Wang

1997-01-01

In this paper, we study the Local Discontinuous Galerkin methods for nonlinear, time-dependent convection-diffusion systems. These methods are an extension of the Runge-Kutta Discontinuous Galerkin methods for purely hyperbolic systems to convection-diffusion systems and share with those methods their high parallelizability, their high-order formal accuracy, and their easy handling of complicated geometries, for convection dominated problems. It is proven that for scalar equations, the Local Discontinuous Galerkin methods are L(sup 2)-stable in the nonlinear case. Moreover, in the linear case, it is shown that if polynomials of degree k are used, the methods are k-th order accurate for general triangulations; although this order of convergence is suboptimal, it is sharp for the LDG methods. Preliminary numerical examples displaying the performance of the method are shown.

A two-step, fourth-order method with energy preserving properties

NASA Astrophysics Data System (ADS)

Brugnano, Luigi; Iavernaro, Felice; Trigiante, Donato

2012-09-01

We introduce a family of fourth-order two-step methods that preserve the energy function of canonical polynomial Hamiltonian systems. As is the case with linear mutistep and one-leg methods, a prerogative of the new formulae is that the associated nonlinear systems to be solved at each step of the integration procedure have the very same dimension of the underlying continuous problem. The key tools in the new methods are the line integral associated with a conservative vector field (such as the one defined by a Hamiltonian dynamical system) and its discretization obtained by the aid of a quadrature formula. Energy conservation is equivalent to the requirement that the quadrature is exact, which turns out to be always the case in the event that the Hamiltonian function is a polynomial and the degree of precision of the quadrature formula is high enough. The non-polynomial case is also discussed and a number of test problems are finally presented in order to compare the behavior of the new methods to the theoretical results.

3DHZETRN: Inhomogeneous Geometry Issues

NASA Technical Reports Server (NTRS)

Wilson, John W.; Slaba, Tony C.; Badavi, Francis F.

2017-01-01

Historical methods for assessing radiation exposure inside complicated geometries for space applications were limited by computational constraints and lack of knowledge associated with nuclear processes occurring over a broad range of particles and energies. Various methods were developed and utilized to simplify geometric representations and enable coupling with simplified but efficient particle transport codes. Recent transport code development efforts, leading to 3DHZETRN, now enable such approximate methods to be carefully assessed to determine if past exposure analyses and validation efforts based on those approximate methods need to be revisited. In this work, historical methods of representing inhomogeneous spacecraft geometry for radiation protection analysis are first reviewed. Two inhomogeneous geometry cases, previously studied with 3DHZETRN and Monte Carlo codes, are considered with various levels of geometric approximation. Fluence, dose, and dose equivalent values are computed in all cases and compared. It is found that although these historical geometry approximations can induce large errors in neutron fluences up to 100 MeV, errors on dose and dose equivalent are modest (<10%) for the cases studied here.

Vertical Patellar Dislocation: Reduction by the Push Up and Rotate Method, A Case Report and Literature Review.

PubMed

Ahmad Khan, Hayat; Bashir Shah, Adil; Kamal, Younis

2016-11-01

Patellar dislocation is an emergency. Vertical patellar dislocation is rare, often seen in adolescents and mostly due to sports injuries or high-velocity trauma. Few cases have been reported in the literature. Closed or open reduction under general anesthesia is often needed. We report a case of vertical locked patellar dislocation in a 26-year-old male, which was reduced by a simple closed method under spinal anaesthesia. A literature review regarding the various methods of treatment is also discussed. A 26-year-old male experienced a trivial accident while descending stairs, sustaining patellar dislocation. The closed method of reduction was attempted, using a simple technique. Reduction was confirmed and postoperative rehabilitation was started. Follow-up was uneventful. Vertical patellar dislocations are encountered rarely in the emergency department. Adolescents are not the only victims, and high-velocity trauma is not the essential cause. Unnecessary manipulation should be avoided. The closed reduction method is simple, but the surgeon should be prepared for open reduction.

Abstracting of suspected illegal land use in urban areas using case-based classification of remote sensing images

NASA Astrophysics Data System (ADS)

Chen, Fulong; Wang, Chao; Yang, Chengyun; Zhang, Hong; Wu, Fan; Lin, Wenjuan; Zhang, Bo

2008-11-01

This paper proposed a method that uses a case-based classification of remote sensing images and applied this method to abstract the information of suspected illegal land use in urban areas. Because of the discrete cases for imagery classification, the proposed method dealt with the oscillation of spectrum or backscatter within the same land use category, and it not only overcame the deficiency of maximum likelihood classification (the prior probability of land use could not be obtained) but also inherited the advantages of the knowledge-based classification system, such as artificial intelligence and automatic characteristics. Consequently, the proposed method could do the classifying better. Then the researchers used the object-oriented technique for shadow removal in highly dense city zones. With multi-temporal SPOT 5 images whose resolution was 2.5×2.5 meters, the researchers found that the method can abstract suspected illegal land use information in urban areas using post-classification comparison technique.

An Aquatic Decomposition Scoring Method to Potentially Predict the Postmortem Submersion Interval of Bodies Recovered from the North Sea.

PubMed

van Daalen, Marjolijn A; de Kat, Dorothée S; Oude Grotebevelsborg, Bernice F L; de Leeuwe, Roosje; Warnaar, Jeroen; Oostra, Roelof Jan; M Duijst-Heesters, Wilma L J

2017-03-01

This study aimed to develop an aquatic decomposition scoring (ADS) method and investigated the predictive value of this method in estimating the postmortem submersion interval (PMSI) of bodies recovered from the North Sea. This method, consisting of an ADS item list and a pictorial reference atlas, showed a high interobserver agreement (Krippendorff's alpha ≥ 0.93) and hence proved to be valid. This scoring method was applied to data, collected from closed cases-cases in which the postmortal submersion interval (PMSI) was known-concerning bodies recovered from the North Sea from 1990 to 2013. Thirty-eight cases met the inclusion criteria and were scored by quantifying the observed total aquatic decomposition score (TADS). Statistical analysis demonstrated that TADS accurately predicts the PMSI (p < 0.001), confirming that the decomposition process in the North Sea is strongly correlated to time. © 2017 American Academy of Forensic Sciences.

A Mixed-Method Analysis of Reports on 100 Cases of Improper Prescribing of Controlled Substances

PubMed Central

DuBois, James M.; Chibnall, John T.; Anderson, Emily E.; Eggers, Michelle; Baldwin, Kari; Vasher, Meghan

2017-01-01

Improper prescribing of controlled substances contributes to opioid addictions and deaths by overdose. Studies conducted to-date have largely lacked a theoretical framework and ignored the interaction of individual with environmental factors. We conducted a mixed-method analysis of published reports on 100 cases that occurred in the United States. An average of 17 reports (e.g., from medical boards) per case were coded for 38 dichotomous variables describing the physician, setting, patients, and investigation. A theory on how the case occurred was developed for each case. Explanatory typologies were developed and then validated through hierarchical cluster analysis. Most cases involved physicians who were male (88%), >40 years old (90%), non-board certified (63%), and in small private practices (97%); 54% of cases reported facts about the physician indicative of self-centered personality traits. Three explanatory typologies were validated. Increasing oversight provided by peers and trainees may help prevent improper prescribing of controlled substances. PMID:28663601

The theoretical accuracy of Runge-Kutta time discretizations for the initial boundary value problem: A careful study of the boundary error

NASA Technical Reports Server (NTRS)

Carpenter, Mark H.; Gottlieb, David; Abarbanel, Saul; Don, Wai-Sun

1993-01-01

The conventional method of imposing time dependent boundary conditions for Runge-Kutta (RK) time advancement reduces the formal accuracy of the space-time method to first order locally, and second order globally, independently of the spatial operator. This counter intuitive result is analyzed in this paper. Two methods of eliminating this problem are proposed for the linear constant coefficient case: (1) impose the exact boundary condition only at the end of the complete RK cycle, (2) impose consistent intermediate boundary conditions derived from the physical boundary condition and its derivatives. The first method, while retaining the RK accuracy in all cases, results in a scheme with much reduced CFL condition, rendering the RK scheme less attractive. The second method retains the same allowable time step as the periodic problem. However it is a general remedy only for the linear case. For non-linear hyperbolic equations the second method is effective only for for RK schemes of third order accuracy or less. Numerical studies are presented to verify the efficacy of each approach.

'Fast cast' and 'needle Tenotomy' protocols with the Ponseti method to improve clubfoot management in Bangladesh.

PubMed

Evans, Angela; Chowdhury, Mamun; Rana, Sohel; Rahman, Shariar; Mahboob, Abu Hena

2017-01-01

The management of congenital talipes equino varus ( clubfoot deformity ) has been transformed in the last 20 years as surgical correction has been replaced by the non-surgical Ponseti method. The Ponseti method, consists of corrective serial casting followed by maintenance bracing, and has been repeatedly demonstrated to give best results - regarded as the 'gold standard' treatment for paediatric clubfoot. To develop the study protocol Level 2 evidence was used to modify the corrective casting phase of the Ponseti method in children aged up to 12 months. Using Level 4 evidence, the percutaneous Achilles tenotomy (PAT) was performed using a 19-gauge needle instead of a scalpel blade, a technique found to reduce bleeding and scarring. A total of 123 children participated in this study; 88 male, 35 female. Both feet were affected in 67 cases, left only in 22 cases, right only in 34 cases. Typical clubfeet were found in 112/123 cases, six atypical, five syndromic. The average age at first cast was 51 days (13-240 days).The average number of casts applied was five (2-10 casts). The average number of days between the first cast and brace was 37.8 days (10-122 days), including 21 days in a post-PAT cast. Hence, average time of corrective casts was 17 days.Parents preferred the reduced casting time, and were less concerned about unseen skin wounds.PAT was performed in 103/123 cases, using the needle technique. All post tenotomy casts were in situ for three weeks. Minor complications occurred in seven cases - four cases had skin lesions, three cases disrupted casting phase. At another site, 452 PAT were performed using the needle technique. The 'fast cast' protocol Ponseti casting was successfully used in infants aged less than 8 months. Extended manual manipulation of two minutes was the essential modification. Parents preferred the faster treatment phase, and ability to closer observe the foot and skin. The treating physiotherapists preferred the 'fast cast' protocol, achieving better correction with less complication. The needle technique for PAT is a further improvement for the Ponseti method.

Can the caged bird sing? Reflections on the application of qualitative research methods to case study design in homeopathic medicine

PubMed Central

Thompson, Trevor DB

2004-01-01

Background Two main pathways exist for the development of knowledge in clinical homeopathy. These comprise clinical trials conducted primarily by university-based researchers and cases reports and homeopathic "provings" compiled by engaged homeopathic practitioners. In this paper the relative merits of these methods are examined and a middle way proposed. This consists of the "Formal Case Study" (FCS) in which qualitative methods are used to increase the rigour and sophistication with which homeopathic cases are studied. Before going into design issues this paper places the FCS in an historical and academic context and describes the relative merits of the method. Discussion Like any research, the FCS should have a clear focus. This focus can be both "internal", grounded in the discourse of homeopathy and also encompass issues of wider appeal. A selection of possible "internal" and "external" research questions is introduced. Data generation should be from multiple sources to ensure adequate triangulation. This could include the recording and transcription of actual consultations. Analysis is built around existing theory, involves cross-case comparison and the search for deviant cases. The trustworthiness of conclusions is ensured by the application of concepts from qualitative research including triangulation, groundedness, respondent validation and reflexivity. Though homeopathic case studies have been reported in mainstream literature, none has used formal qualitative methods – though some such studies are in progress. Summary This paper introduces the reader to a new strategy for homeopathic research. This strategy, termed the "formal case study", allows for a naturalistic enquiry into the players, processes and outcomes of homeopathic practice. Using ideas from qualitative research, it allows a rigorous approach to types of research question that cannot typically be addressed through clinical trials and numeric outcome studies. The FCS provides an opportunity for the practitioner-researcher to contribute to the evidence-base in homeopathy in a systematic fashion. The FCS can also be used to inform the design of clinical trials through holistic study of the "active ingredients" of the therapeutic process and its clinical outcomes. PMID:15018637

Practical considerations for measuring hydrogen concentrations in groundwater

USGS Publications Warehouse

Chapelle, F.H.; Vroblesky, D.A.; Woodward, J.C.; Lovley, D.R.

1997-01-01

Several practical considerations for measuring concentrations of dissolved molecular hydrogen (H2) in groundwater including 1 sampling methods 2 pumping methods and (3) effects of well casing materials were evaluated. Three different sampling methodologies (a downhole sampler, a gas- stripping method, and a diffusion sampler) were compared. The downhole sampler and gas-stripping methods gave similar results when applied to the same wells, the other hand, appeared to The diffusion sampler, on overestimate H2 concentrations relative to the downhole sampler. Of these methods, the gas-stripping method is better suited to field conditions because it is faster (~ 30 min for a single analysis as opposed to 2 h for the downhole sampler or 8 h for the diffusion sampler), the analysis is easier (less sample manipulation is required), and the data computations are more straightforward (H2 concentrations need not be corrected for water sample volume). Measurement of H2 using the gas-stripping method can be affected by different pumping equipment. Peristaltic, piston, and bladder pumps all gave similar results when applied to water produced from the same well. It was observed, however, that peristaltic-pumped water (which draws water under a negative pressure) enhanced the gas-stripping process and equilibrated slightly faster than either piston or bladder pumps (which push water under a positive pressure). A direct current(dc) electrically driven submersible pump was observed to produce H2 and was not suitable for measuring H2 in groundwater. Measurements from two field sites indicate that iron or steel well casings, produce H2, which masks H2 concentrations in groundwater. PVC-cased wells or wells cased with other materials that do not produce H2 are necessary for measuring H2 concentrations in groundwater.Several practical considerations for measuring concentrations of dissolved molecular hydrogen in groundwater including sampling methods, pumping methods, and effects of well casing materials were evaluated. The downhole sampler and gas-stripping methods gave similar results when applied to the same wells. The diffusional sampler appears to overestimate H2 concentrations relative to the downhole sampler. Gas-stripping method is better for a single analysis and the data computations are more straightforward. Measurement of H2 using the gas-stripping method can be affected by different pumping equipment.

The utilization of tachymetry in forensic medicine.

PubMed

Hagara, M; Sidlo, J; Stuparin, J; Siget, V; Soral, A; Valent, D

2009-01-01

Tachymetry is a geodetic method enabling to measure angles and distances. The aim of the work was to demonstrate alternatives of its utilization in daily forensic medicine practice. The work is dealing with confusing cases of gunshot injuries. It is impossible to determine the trajectory of the projectile, the sequence of gunshots, to identify shooting person etc. in these cases only on the base of autopsy findings and investigated circumstances. In these cases the investigation experiments on the crime scene in collaboration with the land surveyors were realized. The work presents two case reports. For our measurements the electronic tachymeter TOPCON 211D was used. These were performed by the means of polar method in local coordinate system with relative heights. In the first case the position of victim was simulated by a figurant according to testimonies of witnesses and the accused. The second case dealed with suicide. In the first case there were two gunshots. The trajectory of the first gunshot was determined and the projectile was found. Hereby the most authentic testimony could be estimated. Also high grade probability of the relative position of the victim and the accused was figured out. In the case of suicide also the projectile was found and the position of the victim in the time of gunshot was determined. In the both case reports demonstrated the projectiles were not found by ballistics expert investigations. All questions of expert opinions could be answered only with the help of tachymetry. The advantage of this method is its good regional availability even at places far from specialized criminal investigation workplaces.

[Application of blocking vessels in operative therapy of non-limb hemangioma].

PubMed

Zheng, Fanwei; Cen, Ying; Cui, Zhengjun

2005-04-01

To study the surgical method to reduce bleeding in treating hemangioma at non-limb sites. From November 1998 to November 2003, 49 cases of non-limb hemangioma were treated, aged 3 months to 63 years, including 21 males and 28 females. There were 14 cases of capillary hemangioma, 25 cases of cavernous hemangioma, 7 cases of arterial racemose angioma and 3 cases of mixture hemangioma. According to the position and type of hemangioma, the various methods of blocking blood vessels were adopted to assist resect tumors. After the pulsatile artery was felt in arterial racemose angioma of neck and face by palpation, we sutured and knotted it with 7-0 silk string to block the bleeding. We found out the common iliac artery or external iliac artery or femoral artery and blocked them temporarily to resect arterial racemose angioma in inguen and thigh. We sutured and knotted vessel with 7-0 silk string to block the bleeding in capillary hemangioma and cavernous hemangioma of neck and face and truncus. Intraoperative bleeding obviously decreased and the tumor size reduced to various extent. Of the 49 cases, 47 cases achieved complete success, 2 cases bled within two days after operation. A postoperative follow-up of 6 months to 4 years showed that the appearance and function were satisfactory. The preoperative method of blocking blood vessels obviously can reduce intraoperative bleeding and decrease operative difficulty, which makes it possible to eradicate hemangioma and lower recurrence rate.

[Clinical observation on nanometer acupoint mounting method for alleviation of myospasm complicated by spinal injury].

PubMed

Zhang, Su-Jie; Si, Tong; Li, Zhi

2008-11-01

To observe clinical effect of nanometer acupoint mounting method for alleviation of myospasm complicated by spinal injury. Sixty cases were randomly divided into an observation group and a control group, 30 cases in each group. The observation group were treated by nanometer mounting at 4 Jiaji (EX-B 2) points each on both sides of the affected spine and Shenshu (BL 23), Shangliao (BL 31), Ciliao (BL 32), Yang-lingquan (GB 34), Xuanzhong (GB 39); and the control group by mounting zinc oxide sticking tablets at the above acupoints. The mounting was replaced once each two days, 7 times constituting one course. One week and one month after the end of 3 courses, their results were recorded, respectively. Before treatment, there was no significant difference between the two groups in grades of the myospasm degree (P > 0.05). One week after the end of treatment, 15 cases were grade I of myospasm, 9 cases were grade II, 5 cases were grade III and 1 case was grade IV in the observation group, and 1 cases grade I, 7 cases grade II, 14 cases grade III, 8 cases grade IV in the control group. Ridit analysis on the data indicated that there were significant differences before and after treatment in the myospasm degree (P < 0.01) and between the two groups after treatment (P < 0.01). One month after the end of treatment, the results were similar to those one week after the end of treatment. Nanometer acupoint mounting method is a new one for alleviation of myospasm complicated by spinal injury, with convenience, safety and no side effect.

Addressing trend-related changes within cumulative effects studies in water resources planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Canter, L.W., E-mail: envimptr@aol.com; Chawla, M.K.; Swor, C.T.

2014-01-15

Summarized herein are 28 case studies wherein trend-related causative physical, social, or institutional changes were connected to consequential changes in runoff, water quality, and riparian and aquatic ecological features. The reviewed cases were systematically evaluated relative to their identified environmental effects; usage of analytical frameworks, and appropriate models, methods, and technologies; and the attention given to mitigation and/or management of the resultant causative and consequential changes. These changes also represent important considerations in project design and operation, and in cumulative effects studies associated therewith. The cases were grouped into five categories: institutional changes associated with legislation and policies (seven cases);more » physical changes from land use changes in urbanizing watersheds (eight cases); physical changes from land use changes and development projects in watersheds (four cases); physical, institutional, and social changes from land use and related policy changes in river basins (three cases); and multiple changes within a comprehensive study of land use and policy changes in the Willamette River Basin in Oregon (six cases). A tabulation of 110 models, methods and technologies used in the studies is also presented. General observations from this review were that the features were unique for each case; the consequential changes were logically based on the causative changes; the analytical frameworks provided relevant structures for the studies, and the identified methods and technologies were pertinent for addressing both the causative and consequential changes. One key lesson was that the cases provide useful, “real-world” illustrations of the importance of addressing trend-related changes in cumulative effects studies within water resources planning. Accordingly, they could be used as an “initial tool kit” for addressing trend-related changes.« less

Case-based learning facilitates critical thinking in undergraduate nutrition education: students describe the big picture.

PubMed

Harman, Tara; Bertrand, Brenda; Greer, Annette; Pettus, Arianna; Jennings, Jill; Wall-Bassett, Elizabeth; Babatunde, Oyinlola Toyin

2015-03-01

The vision of dietetics professions is based on interdependent education, credentialing, and practice. Case-based learning is a method of problem-based learning that is designed to heighten higher-order thinking. Case-based learning can assist students to connect education and specialized practice while developing professional skills for entry-level practice in nutrition and dietetics. This study examined student perspectives of their learning after immersion into case-based learning in nutrition courses. The theoretical frameworks of phenomenology and Bloom's Taxonomy of Educational Objectives triangulated the design of this qualitative study. Data were drawn from 426 written responses and three focus group discussions among 85 students from three upper-level undergraduate nutrition courses. Coding served to deconstruct the essence of respondent meaning given to case-based learning as a learning method. The analysis of the coding was the constructive stage that led to configuration of themes and theoretical practice pathways about student learning. Four leading themes emerged. Story or Scenario represents the ways that students described case-based learning, changes in student thought processes to accommodate case-based learning are illustrated in Method of Learning, higher cognitive learning that was achieved from case-based learning is represented in Problem Solving, and Future Practice details how students explained perceived professional competency gains from case-based learning. The skills that students acquired are consistent with those identified as essential to professional practice. In addition, the common concept of Big Picture was iterated throughout the themes and demonstrated that case-based learning prepares students for multifaceted problems that they are likely to encounter in professional practice. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Comparison the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination or ultrasound methods.

PubMed

Karimzadeh, Hadi; Seyedbonakdar, Zahra; Mousavi, Maryam; Karami, Mehdi

2016-01-01

This study aimed to compare the percentage of detection of periarthritis in patients with rheumatoid arthritis using clinical examination and ultrasound methods. This study is a cross-sectional study which was conducted in Al-Zahra Hospital (Isfahan, Iran) during 2014-2015. In our study, ninety patients were selected based on the American College of Rheumatology 2010 criteria. All patients were examined by a rheumatologist to find the existence of effusion, and the data were filled in the checklist. The ultrasonography for detecting effusion in periarticular structures was done by an expert radiologist with two methods, including high-resolution ultrasonography and power Doppler. The percentage of effusion existence found by physical examination was compared by sonography, and the Chi-square and t -tests were used for data analysis. The percentage of effusion found in areas with physical examination by rheumatologist was lower than the frequency distribution of effusions found by sonography (8.3% VS 14.2%) ( P < 0.001). In sonography, rotator cuff tendonitis is the most common periarthritis. Other findings in sonography were biceps tendinitis (10 cases), wrist tendonitis (13 cases), olecranon bursitis (9 cases), golfers elbow (4 cases), tennis elbow (4 cases), trochanteric bursitis (6 cases), anserine bursitis (6 cases), prepatellar bursitis (11 cases), and ankle tendonitis (7 cases). Tenderness on physical examination was found in 15% of the cases, and the evidence of periarthritis was found in 21/7% through sonography ( P < 0.001) and 34% through Doppler sonography ( P < 0.001). The percentage of periarthritis detection by ultrasonography and power Doppler sonography was higher than clinical examination. Hence, the ultrasonography is more accurate than physical examination.

Optimization under variability and uncertainty: a case study for NOx emissions control for a gasification system.

PubMed

Chen, Jianjun; Frey, H Christopher

2004-12-15

Methods for optimization of process technologies considering the distinction between variability and uncertainty are developed and applied to case studies of NOx control for Integrated Gasification Combined Cycle systems. Existing methods of stochastic optimization (SO) and stochastic programming (SP) are demonstrated. A comparison of SO and SP results provides the value of collecting additional information to reduce uncertainty. For example, an expected annual benefit of 240,000 dollars is estimated if uncertainty can be reduced before a final design is chosen. SO and SP are typically applied to uncertainty. However, when applied to variability, the benefit of dynamic process control is obtained. For example, an annual savings of 1 million dollars could be achieved if the system is adjusted to changes in process conditions. When variability and uncertainty are treated distinctively, a coupled stochastic optimization and programming method and a two-dimensional stochastic programming method are demonstrated via a case study. For the case study, the mean annual benefit of dynamic process control is estimated to be 700,000 dollars, with a 95% confidence range of 500,000 dollars to 940,000 dollars. These methods are expected to be of greatest utility for problems involving a large commitment of resources, for which small differences in designs can produce large cost savings.

Online market research panel members as controls in case-control studies to investigate gastrointestinal disease outbreaks: early experiences and lessons learnt from the UK.

PubMed

Mook, P; McCormick, J; Kanagarajah, S; Adak, G K; Cleary, P; Elson, R; Gobin, M; Hawker, J; Inns, T; Sinclair, C; Trienekens, S C M; Vivancos, R; McCarthy, N D

2018-03-01

Established methods of recruiting population controls for case-control studies to investigate gastrointestinal disease outbreaks can be time consuming, resulting in delays in identifying the source or vehicle of infection. After an initial evaluation of using online market research panel members as controls in a case-control study to investigate a Salmonella outbreak in 2013, this method was applied in four further studies in the UK between 2014 and 2016. We used data from all five studies and interviews with members of each outbreak control team and market research panel provider to review operational issues, evaluate risk of bias in this approach and consider methods to reduce confounding and bias. The investigators of each outbreak reported likely time and cost savings from using market research controls. There were systematic differences between case and control groups in some studies but no evidence that conclusions on the likely source or vehicle of infection were incorrect. Potential selection biases introduced by using this sampling frame and the low response rate are unclear. Methods that might reduce confounding and some bias should be balanced with concerns for overmatching. Further evaluation of this approach using comparisons with traditional methods and population-based exposure survey data is recommended.

Development of a Quantitative Decision Metric for Selecting the Most Suitable Discretization Method for SN Transport Problems

NASA Astrophysics Data System (ADS)

Schunert, Sebastian

In this work we develop a quantitative decision metric for spatial discretization methods of the SN equations. The quantitative decision metric utilizes performance data from selected test problems for computing a fitness score that is used for the selection of the most suitable discretization method for a particular SN transport application. The fitness score is aggregated as a weighted geometric mean of single performance indicators representing various performance aspects relevant to the user. Thus, the fitness function can be adjusted to the particular needs of the code practitioner by adding/removing single performance indicators or changing their importance via the supplied weights. Within this work a special, broad class of methods is considered, referred to as nodal methods. This class is naturally comprised of the DGFEM methods of all function space families. Within this work it is also shown that the Higher Order Diamond Difference (HODD) method is a nodal method. Building on earlier findings that the Arbitrarily High Order Method of the Nodal type (AHOTN) is also a nodal method, a generalized finite-element framework is created to yield as special cases various methods that were developed independently using profoundly different formalisms. A selection of test problems related to a certain performance aspect are considered: an Method of Manufactured Solutions (MMS) test suite for assessing accuracy and execution time, Lathrop's test problem for assessing resilience against occurrence of negative fluxes, and a simple, homogeneous cube test problem to verify if a method possesses the thick diffusive limit. The contending methods are implemented as efficiently as possible under a common SN transport code framework to level the playing field for a fair comparison of their computational load. Numerical results are presented for all three test problems and a qualitative rating of each method's performance is provided for each aspect: accuracy/efficiency, resilience against negative fluxes, and possession of the thick diffusion limit, separately. The choice of the most efficient method depends on the utilized error norm: in Lp error norms higher order methods such as the AHOTN method of order three perform best, while for computing integral quantities the linear nodal (LN) method is most efficient. The most resilient method against occurrence of negative fluxes is the simple corner balance (SCB) method. A validation of the quantitative decision metric is performed based on the NEA box-inbox suite of test problems. The validation exercise comprises two stages: first prediction of the contending methods' performance via the decision metric and second computing the actual scores based on data obtained from the NEA benchmark problem. The comparison of predicted and actual scores via a penalty function (ratio of predicted best performer's score to actual best score) completes the validation exercise. It is found that the decision metric is capable of very accurate predictions (penalty < 10%) in more than 83% of the considered cases and features penalties up to 20% for the remaining cases. An exception to this rule is the third test case NEA-III intentionally set up to incorporate a poor match of the benchmark with the "data" problems. However, even under these worst case conditions the decision metric's suggestions are never detrimental. Suggestions for improving the decision metric's accuracy are to increase the pool of employed data, to refine the mapping of a given configuration to a case in the database, and to better characterize the desired target quantities.

Traffic operational evaluation of traffic impact analysis (TIA) case sites.

DOT National Transportation Integrated Search

2010-09-22

This report summarizes traffic operational evaluation of six select traffic impact analysis (TIA) case sites and the effectiveness of forecasting methods used in TIA studies. Six TIA case sites comprising 15 signalized intersections and 2 unsignalize...

Application of Ponseti method in patients older than 6 months with congenital talipes equinovarus.

PubMed

Wang, Yan-zhou; Wang, Xiao-wen; Zhang, Peng; Wang, Xing-shan

2009-08-18

To evaluate the effectiveness of Ponseti method in the treatment of congenital talipes equinovarus (CTE) in children older than 6 months. Ponseti method was used to treat 157 cases (227 feet) of CTE in children older than 6 months. All cases were classified by age and by the degree of deformity severity. The age group classification was: (1) I Group (6 months to 12 months), 113 feet in 81 cases; (2) II Group (1 to 3 years old), 78 feet in 52 cases; (3) III Group (> 3 years old), 36 feet in 24 cases. The degree of deformity of CTE was evaluated with Pirani scoring system. The cases were classified into three groups according to the deformity degree: (1) Mild Group (scoring 1-2.5), 85 feet in 56 cases; (2) Moderate Group (scoring 3-4.5), 104 feet in 71 cases; (3) Severe Group (scoring 5-6), 38 feet in 30 cases. A Pirani score of 0-0.5 is regarded as an excellent result. For each group, we evaluated the number of casts used, the percentage of excellent result according to the Pirani score, and the percentage of percutaneous achillotenotomy. The result was compared among different groups. The overall percentage of excellent result among all cases was 96.92%. Among the age groups, the percentage of excellence was not statistically different between I Group and II Group (P > 0.05). The percentage of excellence was lower in the III group than the other groups (P > 0.01). Among the groups classified by deformity degree, the percentage of excellence was the lowest in severe group (P < 0.05), and the difference between the mild group and moderate group was not statistically different (P > 0.05). The number of casts used among different groups were different (P < 0.01). Among different groups, the percentages of percutaneous achillotenotomy were significantly different (P < 0.01). 209 feet in 148 cases were followed up for average time duration of 3 years and 11 months. Relapse was observed in 40 feet in 29 cases. The percentages of relapse were not statistically different among different groups (P > 0.05). Using Ponseti method to treat CTE for children older than 6 months can achieve excellent results in this study.

Model-based methods for case definitions from administrative health data: application to rheumatoid arthritis

PubMed Central

Kroeker, Kristine; Widdifield, Jessica; Muthukumarana, Saman; Jiang, Depeng; Lix, Lisa M

2017-01-01

Objective This research proposes a model-based method to facilitate the selection of disease case definitions from validation studies for administrative health data. The method is demonstrated for a rheumatoid arthritis (RA) validation study. Study design and setting Data were from 148 definitions to ascertain cases of RA in hospital, physician and prescription medication administrative data. We considered: (A) separate univariate models for sensitivity and specificity, (B) univariate model for Youden’s summary index and (C) bivariate (ie, joint) mixed-effects model for sensitivity and specificity. Model covariates included the number of diagnoses in physician, hospital and emergency department records, physician diagnosis observation time, duration of time between physician diagnoses and number of RA-related prescription medication records. Results The most common case definition attributes were: 1+ hospital diagnosis (65%), 2+ physician diagnoses (43%), 1+ specialist physician diagnosis (51%) and 2+ years of physician diagnosis observation time (27%). Statistically significant improvements in sensitivity and/or specificity for separate univariate models were associated with (all p values <0.01): 2+ and 3+ physician diagnoses, unlimited physician diagnosis observation time, 1+ specialist physician diagnosis and 1+ RA-related prescription medication records (65+ years only). The bivariate model produced similar results. Youden’s index was associated with these same case definition criteria, except for the length of the physician diagnosis observation time. Conclusion A model-based method provides valuable empirical evidence to aid in selecting a definition(s) for ascertaining diagnosed disease cases from administrative health data. The choice between univariate and bivariate models depends on the goals of the validation study and number of case definitions. PMID:28645978

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

PubMed

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

Method of evaluating the impact of ERP implementation critical success factors - a case study in oil and gas industries

NASA Astrophysics Data System (ADS)

Gajic, Gordana; Stankovski, Stevan; Ostojic, Gordana; Tesic, Zdravko; Miladinovic, Ljubomir

2014-01-01

The so far implemented enterprise resource planning (ERP) systems have in many cases failed to meet the requirements regarding the business process control, decrease of business costs and increase of company profit margin. Therefore, there is a real need for an evaluation of the influence of ERP on the company's performance indicators. Proposed in this article is an advanced model for the evaluation of the success of ERP implementation on organisational and operational performance indicators in oil-gas companies. The recommended method establishes a correlation between a process-based method, a scorecard model and ERP critical success factors. The method was verified and tested on two case studies in oil-gas companies using the following procedure: the model was developed, tested and implemented in a pilot gas-oil company, while the results were implemented and verified in another gas-oil company.

A reflective lens: applying critical systems thinking and visual methods to ecohealth research.

PubMed

Cleland, Deborah; Wyborn, Carina

2010-12-01

Critical systems methodology has been advocated as an effective and ethical way to engage with the uncertainty and conflicting values common to ecohealth problems. We use two contrasting case studies, coral reef management in the Philippines and national park management in Australia, to illustrate the value of critical systems approaches in exploring how people respond to environmental threats to their physical and spiritual well-being. In both cases, we used visual methods--participatory modeling and rich picturing, respectively. The critical systems methodology, with its emphasis on reflection, guided an appraisal of the research process. A discussion of these two case studies suggests that visual methods can be usefully applied within a critical systems framework to offer new insights into ecohealth issues across a diverse range of socio-political contexts. With this article, we hope to open up a conversation with other practitioners to expand the use of visual methods in integrated research.

Applying Process Improvement Methods to Clinical and Translational Research: Conceptual Framework and Case Examples

PubMed Central

Selker, Harry P.; Leslie, Laurel K.

2015-01-01

Abstract There is growing appreciation that process improvement holds promise for improving quality and efficiency across the translational research continuum but frameworks for such programs are not often described. The purpose of this paper is to present a framework and case examples of a Research Process Improvement Program implemented at Tufts CTSI. To promote research process improvement, we developed online training seminars, workshops, and in‐person consultation models to describe core process improvement principles and methods, demonstrate the use of improvement tools, and illustrate the application of these methods in case examples. We implemented these methods, as well as relational coordination theory, with junior researchers, pilot funding awardees, our CTRC, and CTSI resource and service providers. The program focuses on capacity building to address common process problems and quality gaps that threaten the efficient, timely and successful completion of clinical and translational studies. PMID:26332869

Coupling detrended fluctuation analysis for analyzing coupled nonstationary signals.

PubMed

Hedayatifar, L; Vahabi, M; Jafari, G R

2011-08-01

When many variables are coupled to each other, a single case study could not give us thorough and precise information. When these time series are stationary, different methods of random matrix analysis and complex networks can be used. But, in nonstationary cases, the multifractal-detrended-cross-correlation-analysis (MF-DXA) method was introduced for just two coupled time series. In this article, we have extended the MF-DXA to the method of coupling detrended fluctuation analysis (CDFA) for the case when more than two series are correlated to each other. Here, we have calculated the multifractal properties of the coupled time series, and by comparing CDFA results of the original series with those of the shuffled and surrogate series, we can estimate the source of multifractality and the extent to which our series are coupled to each other. We illustrate the method by selected examples from air pollution and foreign exchange rates.

Coupling detrended fluctuation analysis for analyzing coupled nonstationary signals

NASA Astrophysics Data System (ADS)

Hedayatifar, L.; Vahabi, M.; Jafari, G. R.

2011-08-01

When many variables are coupled to each other, a single case study could not give us thorough and precise information. When these time series are stationary, different methods of random matrix analysis and complex networks can be used. But, in nonstationary cases, the multifractal-detrended-cross-correlation-analysis (MF-DXA) method was introduced for just two coupled time series. In this article, we have extended the MF-DXA to the method of coupling detrended fluctuation analysis (CDFA) for the case when more than two series are correlated to each other. Here, we have calculated the multifractal properties of the coupled time series, and by comparing CDFA results of the original series with those of the shuffled and surrogate series, we can estimate the source of multifractality and the extent to which our series are coupled to each other. We illustrate the method by selected examples from air pollution and foreign exchange rates.

Two Case Studies in the Scientific Method: Antisense Experiments and HIV Vaccination Studies.

ERIC Educational Resources Information Center

Guilfoile, Patrick

1999-01-01

Presents two recent cases that can be used in the classroom to illustrate the application of scientific methods in biological research: (1) the use of a complementary RNA or DNA molecule to block the production or translation of an mRNA molecule; and (2) the development of HIV trial vaccines. Contains 20 references. (WRM)

A Framework for Understanding Community Colleges' Organizational Capacity for Data Use: A Convergent Parallel Mixed Methods Study

ERIC Educational Resources Information Center

Kerrigan, Monica Reid

2014-01-01

This convergent parallel design mixed methods case study of four community colleges explores the relationship between organizational capacity and implementation of data-driven decision making (DDDM). The article also illustrates purposive sampling using replication logic for cross-case analysis and the strengths and weaknesses of quantitizing…

Socratic Case-Method Teaching in Sports Coach Education: Reflections of Students and Course Tutors

ERIC Educational Resources Information Center

Roberts, Simon J.; Ryrie, Angus

2014-01-01

Despite reported increases in higher education (HE) sports coach education provision there are very few studies which have investigated student self-learning curricula as a mechanism to prepare sports coaches with the complexities of learning how to coach. Using an action research methodology, this article examines how case-method teaching (CMT)…

Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

ERIC Educational Resources Information Center

Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

2018-01-01

This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

Using Single-Case Design and Personalized Behavior Change Projects to Teach Research Methods

ERIC Educational Resources Information Center

Morgan, David L.

2009-01-01

Students in research methods courses, especially those taught in an intense format, might be hard pressed to actually conduct research studies due to logistics and time constraints. I describe the use of single-case research design and a personalized behavior project as an alternative research project for students in an undergraduate psychology…

Teaching the Properties of Chromium's Oxidation States with a Case Study Method

ERIC Educational Resources Information Center

Ozdilek, Zehra

2015-01-01

The purpose of this study was to investigate how a mixed-method case study affects pre-service science teachers' awareness of hexavalent chromium pollution and content knowledge about the properties of chromium's different oxidation states. The study was conducted in Turkey with 55 sophomores during the fall semester of 2013-2014. The students…

Charting the Learning Journey of a Group of Adults Returning to Education

ERIC Educational Resources Information Center

Mooney, Des

2011-01-01

Using a qualitative case study method the researcher studied a group of adult returning students completing a childcare course. Methods used included focus groups, a questionnaire and observations. Using a holistic analysis approach (Yin 2003) of the case the researcher then focused on a number of key issues. From this analysis the themes of…

30 CFR 75.701-3 - Approved methods of grounding metallic frames, casings and other enclosures of electric equipment...

Code of Federal Regulations, 2011 CFR

2011-07-01

..., casings and other enclosures of electric equipment receiving power from direct current power systems with... equipment receiving power from direct current power systems with one polarity grounded. For the purpose of... direct-current power system with one polarity grounded, the following methods of grounding will be...

30 CFR 75.701-3 - Approved methods of grounding metallic frames, casings and other enclosures of electric equipment...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., casings and other enclosures of electric equipment receiving power from direct current power systems with... equipment receiving power from direct current power systems with one polarity grounded. For the purpose of... direct-current power system with one polarity grounded, the following methods of grounding will be...

A Unifying Framework for Causal Analysis in Set-Theoretic Multimethod Research

ERIC Educational Resources Information Center

Rohlfing, Ingo; Schneider, Carsten Q.

2018-01-01

The combination of Qualitative Comparative Analysis (QCA) with process tracing, which we call set-theoretic multimethod research (MMR), is steadily becoming more popular in empirical research. Despite the fact that both methods have an elected affinity based on set theory, it is not obvious how a within-case method operating in a single case and a…

The Brief History of Environmental Education and Its Changes from 1972 to Present in Iran

ERIC Educational Resources Information Center

Shobeiri, Seyed Mohammad; Meiboudi, Hossein; Kamali, Fatemeh Ahmadi

2014-01-01

The present study investigates environmental education (EE) before and after Iran's Islamic Revolution. The research method is case study, and among the case study methods, historical analysis has been used in this research. A wide array of sources were employed, from government performance reports to documents, records, books, and articles…

[The frequency of sex chromatine occurring in cell nuclei of internal organs determined by the smear method (author's transl)].

PubMed

Michailow, R

1975-09-05

The frequency of sex chromatine occurring in cell nuclei of twelve organs from 25 male and female corpses was determined using the smear method. It was found to be about 60% in the case of female, and about 6% in the case of male corpses.

[A treatment to serious esophageal cicatrices stenosi by metal and silica gel dilator].

PubMed

Li, J; Chen, X; Sun, C; Liu, H

1999-12-01

To find an effective method of treating the esophageal cicatricial stenosis. Six cases with esophageal cicatricial stenosis were treated by mental and silica gel dilator. The effects in all six cases were satisfactory and no any complications were finded. The method is safe, effective and of no complications, the treatment time is shorter also.

Navigating Access and Maintaining Established Practice: Social Studies Teachers' Technology Integration at Three Florida Middle Schools

ERIC Educational Resources Information Center

Sheffield, Caroline

2011-01-01

This mixed methods multiple case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools This mixed methods, multiple-case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools in a large Florida school…

Using the Case Study Method to Enhance the Learning Skills of Supply Chain Management Students

ERIC Educational Resources Information Center

Naude, M.; Derera, E.

2014-01-01

Higher education institutions need to align themselves more closely with the needs of businesses and equip students with the skills and experience necessary to make them more successful and value-adding employees. This paper explores undergraduate student perceptions of the effectiveness of the case study teaching and learning method in the…

Models Role within Active Learning in Biology. A Case Study

ERIC Educational Resources Information Center

Pop-Pacurar, Irina; Tirla, Felicia-Doina

2009-01-01

In order to integrate ideas and information creatively, to motivate students and activate their thinking, we have used in Biology classes a series of active methods, among which the methods of critical thinking, which had very good results. Still, in the case of some intuitive, abstract, more difficult topics, such as the cell structure,…

Policy and Persistence: An Exploratory Mixed Methods Case Study of "Last Mile" Students at Portland State University

ERIC Educational Resources Information Center

Wubbold, Joseph Mark

2012-01-01

In an extension of educational attainment research, this exploratory mixed- methods case study examines the influence of institutional policies on the behavior of five cohorts (n = 925) of traditional first time, full time (FTFT) freshmen--called "Last Mile" students--at one urban research university located in the Pacific Northwest.…

The Effect of Gender on Perception of Case Studies and Performance

ERIC Educational Resources Information Center

Murray, Marlene

2016-01-01

The case study method of teaching uses real-world narratives to teach concepts and content. This method of teaching encourages active learning, which has been shown to have a positive effect on student performance in many disciplines including science. Although more females than males pursue a postsecondary degree, more males than females pursue…

Solving mixed integer nonlinear programming problems using spiral dynamics optimization algorithm

NASA Astrophysics Data System (ADS)

Kania, Adhe; Sidarto, Kuntjoro Adji

2016-02-01

Many engineering and practical problem can be modeled by mixed integer nonlinear programming. This paper proposes to solve the problem with modified spiral dynamics inspired optimization method of Tamura and Yasuda. Four test cases have been examined, including problem in engineering and sport. This method succeeds in obtaining the optimal result in all test cases.

A Case Study of Enabling Factors in the Technology Integration Change Process

ERIC Educational Resources Information Center

Hsu, Pi-Sui; Sharma, Priya

2008-01-01

The purpose of this qualitative case study was to analyze enabling factors in the technology integration change process in a multi-section science methods course, SCIED 408 (pseudonym), from 1997 to 2003 at a large northeastern university in the United States. We used two major data collection methods, in-depth interviewing and document reviews.…

The Effect of English Language Learning on Creative Thinking Skills: A Mixed Methods Case Study

ERIC Educational Resources Information Center

Sehic, Sandro

2017-01-01

The purpose of this sequential explanatory mixed-methods case study was to investigate the effects of English language learning on creative thinking skills in the domains of fluency, flexibility, originality, and elaboration as measured with the Alternate Uses Test. Unlike the previous research studies that investigated the links between English…

Functional Assessment-Based Interventions for Students with or At-Risk for High-Incidence Disabilities: Field Testing Single-Case Synthesis Methods

ERIC Educational Resources Information Center

Common, Eric Alan; Lane, Kathleen Lynne; Pustejovsky, James E.; Johnson, Austin H.; Johl, Liane Elizabeth

2017-01-01

This systematic review investigated one systematic approach to designing, implementing, and evaluating functional assessment-based interventions (FABI) for use in supporting school-age students with or at-risk for high-incidence disabilities. We field tested several recently developed methods for single-case design syntheses. First, we appraised…

Views of the Social Teacher Candidates about Light Pollution

ERIC Educational Resources Information Center

Polat, Suat; Bekdemir, Ünsal

2017-01-01

The purpose of this study is to determine the views of social studies of teacher candidates about light pollution. This research is designed by using qualitative research method. In the research, case studies--that is one of the qualitative research methods--is used. Case study is a kind of research that offers a rich perspective on analyzing the…

Mixed Methods Case Study of Generational Patterns in Responses to Shame and Guilt

ERIC Educational Resources Information Center

Ng, Tony

2013-01-01

Moral socialization and moral learning are antecedents of moral motivation. As many as 4 generations interact in workplace and education settings; hence, a deeper understanding of the moral motivation of members of those generations is needed. The purpose of this convergent mixed methods case study was to understand the moral motivation of 5…

30 CFR 75.701-3 - Approved methods of grounding metallic frames, casings and other enclosures of electric equipment...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., casings and other enclosures of electric equipment receiving power from direct current power systems with... equipment receiving power from direct current power systems with one polarity grounded. For the purpose of... direct-current power system with one polarity grounded, the following methods of grounding will be...

30 CFR 75.701-3 - Approved methods of grounding metallic frames, casings and other enclosures of electric equipment...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., casings and other enclosures of electric equipment receiving power from direct current power systems with... equipment receiving power from direct current power systems with one polarity grounded. For the purpose of... direct-current power system with one polarity grounded, the following methods of grounding will be...

30 CFR 75.701-3 - Approved methods of grounding metallic frames, casings and other enclosures of electric equipment...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., casings and other enclosures of electric equipment receiving power from direct current power systems with... equipment receiving power from direct current power systems with one polarity grounded. For the purpose of... direct-current power system with one polarity grounded, the following methods of grounding will be...

Modifications Of Discrete Ordinate Method For Computations With High Scattering Anisotropy: Comparative Analysis

NASA Technical Reports Server (NTRS)

Korkin, Sergey V.; Lyapustin, Alexei I.; Rozanov, Vladimir V.

2012-01-01

A numerical accuracy analysis of the radiative transfer equation (RTE) solution based on separation of the diffuse light field into anisotropic and smooth parts is presented. The analysis uses three different algorithms based on the discrete ordinate method (DOM). Two methods, DOMAS and DOM2+, that do not use the truncation of the phase function, are compared against the TMS-method. DOMAS and DOM2+ use the Small-Angle Modification of RTE and the single scattering term, respectively, as an anisotropic part. The TMS method uses Delta-M method for truncation of the phase function along with the single scattering correction. For reference, a standard discrete ordinate method, DOM, is also included in analysis. The obtained results for cases with high scattering anisotropy show that at low number of streams (16, 32) only DOMAS provides an accurate solution in the aureole area. Outside of the aureole, the convergence and accuracy of DOMAS, and TMS is found to be approximately similar: DOMAS was found more accurate in cases with coarse aerosol and liquid water cloud models, except low optical depth, while the TMS showed better results in case of ice cloud.

Deceiving proteins! A case of lymphoma and high creatinine.

PubMed

Metraiah, El Hakem Abdelkarim; Regan, Helen; Louw, Johanna; Kidder, Dana

2017-01-23

Estimation of kidney function by measuring serum creatinine is one the commonest laboratory tests conducted in clinical practice. Enzymatic methods are often used to measure serum creatinine. Clinicians should be aware of the limitations of these methods, such as test interference with paraproteins.We present a case of falsely elevated serum creatinine in a patient referred for renal biopsy. The combination of fluctuating creatinine and normal blood urea level was unusual. Serum protein electrophoresis revealed the presence of an IgM paraprotein. Further investigations confirmed an underlying diagnosis of lymphoplasmacytoid lymphoma. This case highlights how IgM paraprotein can interfere with creatinine estimation by enzymatic assay and the utility of alternative methods of estimating serum creatinine. 2017 BMJ Publishing Group Ltd.

Key techniques and risk management for the application of the Pile-Beam-Arch (PBA) excavation method: a case study of the Zhongjie subway station.

PubMed

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area.

Case Study: The Chemistry of Cocaine

ERIC Educational Resources Information Center

Dewprashad, Brahmadeo

2011-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's case study focuses on the chemistry of cocaine to teach a number of core concepts in organic chemistry. It also requires that students read and analyze an original research paper on…

Structured Case Analysis: Developing Critical Thinking Skills in a Marketing Case Course

ERIC Educational Resources Information Center

Klebba, Joanne M.; Hamilton, Janet G.

2007-01-01

Structured case analysis is a hybrid pedagogy that flexibly combines diverse instructional methods with comprehensive case analysis as a mechanism to develop critical thinking skills. An incremental learning framework is proposed that allows instructors to develop and monitor content-specific theory and the corresponding critical thinking skills.…

71 FR 66315 - Notice of Availability of Invention for Licensing; Government-Owned Invention

Federal Register 2010, 2011, 2012, 2013, 2014

2006-11-14

... Coating and Method of Formulator.//Navy Case No. 97,486: Processing Semantic Markups in Web Ontology... Rotating Clip.//Navy Case No. 97,886: Adding Semantic Support to Existing UDDI Infrastructure.//Navy Case..., Binding, and Integration of Non-Registered Geospatial Web Services.//Navy Case No. 98,094: Novel, Single...

Using Case Studies in the Introductory Public Relations Course.

ERIC Educational Resources Information Center

Adams, William C.

The case study method has received increased attention at both the graduate and undergraduate levels in a number of public relations programs. Unlike the Harvard managerial-oriented case studies, the approach useful in large, introductory public relations courses stems from a simplified team approach to classroom projects, case studies in the…

fMRI for mapping language networks in neurosurgical cases

PubMed Central

Gupta, Santosh S

2014-01-01

Evaluating language has been a long-standing application in functional magnetic resonance imaging (fMRI) studies, both in research and clinical circumstances, and still provides challenges. Localization of eloquent areas is important in neurosurgical cases, so that there is least possible damage to these areas during surgery, maintaining their function postoperatively, therefore providing good quality of life to the patient. Preoperative fMRI study is a non-invasive tool to localize the eloquent areas, including language, with other traditional methods generally used being invasive and at times perilous. In this article, we describe methods and various paradigms to study the language areas, in clinical neurosurgical cases, along with illustrations of cases from our institute. PMID:24851003

[Treatment of complex scapular body fractures by locking reconstructive plates].

PubMed

Zhang, Jun-wei; Hou, Jin-yong; Yang, Mao-qing

2011-03-01

To investigate the method and effect of treatment of complex scapular body fractures by locking reconstructive plate through modified posterior approach. From August 2005 to November 2009, 27 patients with complex scapula body fractures were treated by locking reconstruction bone plate fixation,including 19 males and 8 females with an average age of 36 years old ranging from 16 to 64 years. The time after injury was 0.5 hours to 11 days (averaged 3 days). Of all the patients, 9 cases were associated with ipsilateral clavicle fracture, 2 cases were associated with acromioclavicular joint dislocation,16 cases were associated with multiple rib fractures, 1 case were associated with humeral shaft fractures, 5 cases were associated with pleural effusion, atelectasis, lung contusion etc. After operating,shoulder functional recovery were followed up. Twenty-four patients were followed up from 2 to 35 months with an average of 19 months. According to Hardegger shoulder function,the results were excellent in 15 cases, good in 7 cases, general in 2 cases. This method had the advantage of less trauma and clear exposure, firm and reliable fixation, and early activities.

Short-term solar flare prediction using image-case-based reasoning

NASA Astrophysics Data System (ADS)

Liu, Jin-Fu; Li, Fei; Zhang, Huai-Peng; Yu, Da-Ren

2017-10-01

Solar flares strongly influence space weather and human activities, and their prediction is highly complex. The existing solutions such as data based approaches and model based approaches have a common shortcoming which is the lack of human engagement in the forecasting process. An image-case-based reasoning method is introduced to achieve this goal. The image case library is composed of SOHO/MDI longitudinal magnetograms, the images from which exhibit the maximum horizontal gradient, the length of the neutral line and the number of singular points that are extracted for retrieving similar image cases. Genetic optimization algorithms are employed for optimizing the weight assignment for image features and the number of similar image cases retrieved. Similar image cases and prediction results derived by majority voting for these similar image cases are output and shown to the forecaster in order to integrate his/her experience with the final prediction results. Experimental results demonstrate that the case-based reasoning approach has slightly better performance than other methods, and is more efficient with forecasts improved by humans.

SARP: a value-based approach to hospice admissions triage.

PubMed

MacDonald, D

1995-01-01

As hospices become established and case referrals increase, many programs are faced with the necessity of instituting waiting lists. Prioritizing cases for order of admission requires a triage method that is rational, fair, and consistent. This article describes the SARP method of hospice admissions triage, which evaluates prospective cases according to seniority, acuity, risk, and political significance. SARP's essential features, operative assumptions, advantages, and limitations are discussed, as well as the core hospice values which underlie its use. The article concludes with a call for trial and evaluation of SARP in other hospice settings.