CASE STUDIES OF RADON REDUCTION RESEARCH IN 13 SCHOOL BUILDINGS

EPA Science Inventory

The report details 13 case studies covering radon mitigation research in school buildings from 1990 to 1992. The 13 schools are in Colorado, Maine, Minnesota, Ohio, South Dakota, Tennessee, and the State of Washington. Diagnostics were carried out in all of these schools, and s...

Multidisciplinary life cycle metrics and tools for green buildings.

PubMed

Helgeson, Jennifer F; Lippiatt, Barbara C

2009-07-01

Building sector stakeholders need compelling metrics, tools, data, and case studies to support major investments in sustainable technologies. Proponents of green building widely claim that buildings integrating sustainable technologies are cost effective, but often these claims are based on incomplete, anecdotal evidence that is difficult to reproduce and defend. The claims suffer from 2 main weaknesses: 1) buildings on which claims are based are not necessarily "green" in a science-based, life cycle assessment (LCA) sense and 2) measures of cost effectiveness often are not based on standard methods for measuring economic worth. Yet, the building industry demands compelling metrics to justify sustainable building designs. The problem is hard to solve because, until now, neither methods nor robust data supporting defensible business cases were available. The US National Institute of Standards and Technology (NIST) Building and Fire Research Laboratory is beginning to address these needs by developing metrics and tools for assessing the life cycle economic and environmental performance of buildings. Economic performance is measured with the use of standard life cycle costing methods. Environmental performance is measured by LCA methods that assess the "carbon footprint" of buildings, as well as 11 other sustainability metrics, including fossil fuel depletion, smog formation, water use, habitat alteration, indoor air quality, and effects on human health. Carbon efficiency ratios and other eco-efficiency metrics are established to yield science-based measures of the relative worth, or "business cases," for green buildings. Here, the approach is illustrated through a realistic building case study focused on different heating, ventilation, air conditioning technology energy efficiency. Additionally, the evolution of the Building for Environmental and Economic Sustainability multidisciplinary team and future plans in this area are described.

BIPV: a real-time building performance study for a roof-integrated facility

NASA Astrophysics Data System (ADS)

Aaditya, Gayathri; Mani, Monto

2018-03-01

Building integrated photovoltaic system (BIPV) is a photovoltaic (PV) integration that generates energy and serves as a building envelope. A building element (e.g. roof and wall) is based on its functional performance, which could include structure, durability, maintenance, weathering, thermal insulation, acoustics, and so on. The present paper discusses the suitability of PV as a building element in terms of thermal performance based on a case study of a 5.25 kWp roof-integrated BIPV system in tropical regions. Performance of PV has been compared with conventional construction materials and various scenarios have been simulated to understand the impact on occupant comfort levels. In the current case study, PV as a roofing material has been shown to cause significant thermal discomfort to the occupants. The study has been based on real-time data monitoring supported by computer-based building simulation model.

Energy management study: A proposed case of government building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount ofmore » energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.« less

Energy management study: A proposed case of government building

NASA Astrophysics Data System (ADS)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

2015-05-01

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

Building capacity to address tobacco-related disparities among American Indian and Hispanic/Latino communities: conceptual and systemic considerations.

PubMed

Báezconde-Garbanati, Lourdes; Beebe, Laura A; Pérez-Stable, Eliseo J

2007-10-01

To discuss systemic and conceptual issues that surround capacity building for tobacco control in traditionally underserved communities, by presenting two case studies, one in an American Indian community and another in a Hispanic/Latino community. Key informant interviews, cross-sectional surveys and case study methods were used to create community-specific conceptual frameworks for building capacity for tobacco control. These models of capacity building serve as the backdrop for the development of the two case studies. SETTING, PARTICIPANTS, MEASUREMENTS: Interview and survey participants were identified through convenience and snowball sampling, using a community-based participatory process in an American Indian community in Oklahoma and among the Hispanic/Latino Tobacco Education Partnership (H/LTEP) organizations in California. Using qualitative and quantitative methods, two case studies were created based on the results of interviews with key informants in each of the respective communities, outcomes of efforts to build capacity in tobacco control are presented. The extent to which American Indian and Hispanic/Latino communities have the capacity to address effectively the disproportionate burden of tobacco abuse is contingent upon the presence of leadership, collaboration, programs, distribution of funds and resources, development of policies and an underlying understanding of community strengths, history, values and participation. Common characteristics emerge from the case studies that help bridge differences in definition and measurement across both populations and programs. The conceptual frameworks for capacity building presented provide insight that enhances the ability of priority populations to engage in tobacco control strategies using culturally and language appropriate interventions.

Passive fire building protection system evaluation (case study: millennium ict centre)

NASA Astrophysics Data System (ADS)

Rahman, Vinky; Stephanie

2018-03-01

Passive fire protection system is a system that refers to the building design, both regarding of architecture and structure. This system usually consists of structural protection that protects the structure of the building and prevents the spread of fire and facilitate the evacuation process in case of fire. Millennium ICT Center is the largest electronic shopping center in Medan, Indonesia. As a public building that accommodates the crowd, this building needs a fire protection system by the standards. Therefore, the purpose of this study is to evaluate passive fire protection system of Millennium ICT Center building. The study was conducted to describe the facts of the building as well as direct observation to the research location. The collected data is then processed using the AHP (Analytical Hierarchy Process) method in its weighting process to obtain the reliability value of passive fire protection fire system. The results showed that there are some components of passive fire protection system in the building, but some are still unqualified. The first section in your paper

Planning Additions to Academic Library Buildings: A Seamless Approach.

ERIC Educational Resources Information Center

Hawthorne, Pat, Ed.; Martin, Ron G., Ed.

This document presents three case studies that illustrate how library staffs and architectural design teams can work together to plan additions that are successful solutions to building problems. The case studies cover the experiences of Hope College, Holland, Michigan (David Jensen, Margaret Jensen), Western Maryland College, Westminster,…

Maintenance and Safety Practices of Escalator in Commercial Buildings

NASA Astrophysics Data System (ADS)

Afida Isnaini Janipha, Nurul; Nur Aina Syed Alwee, Sharifah; Ariff, Raihan Mohd; Ismail, Faridah

2018-02-01

The escalator is very crucial to transport a person from one place to another. Nevertheless, there are many cases recorded the accidents in relation to escalator. These may occur due to lack of maintenance which leads to systems breakdown, poor safety practices, wear and tear, users’ negligence and others. Thus, proper maintenance systems need to be improvised to prevent and reduce escalator accident in future. This research was aimed to determine the escalator maintenance activities and safety practices in a commercial building. Three case studies were selected within Selangor area. Semi-structured interviews were conducted for collecting data from these three case studies. To achieve the aim of this research, the study was carried out on the maintenance activities, safety practices and cost related to escalator maintenance. As one of the important means of access in building, it is very crucial to increase effectiveness of escalator particularly in commercial building. It is expected that readers will get clear information on the maintenance activities and safety practices of escalator in commercial building.

Technology Solutions Case Study: Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-09-01

In multifamily building hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution and controls. The effects of imbalance include tenant discomfort, higher energy use intensity and inefficient building operation. In this case study , Partnership for Advanced Residential Retrofit and Elevate Energy. explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs.

Value of Coaching in Building Leadership Capacity of Principals in Urban Schools: A Case Study

ERIC Educational Resources Information Center

Farver, Anita

2014-01-01

The purpose of this qualitative case study was to understand how coaching support structures enabled and sustained leadership practices of urban principals. The study investigated how the intervention of coaching for academic leaders can serve as evidence based professional development for building leadership capacity. The central focus was on…

Tracing the Knowledge Building Process through Discussions Mediated by a CSCL Environment: A Case Study

ERIC Educational Resources Information Center

Adanir, Gülgün Afacan

2017-01-01

This case study demonstrates the use of interaction analysis techniques to explore students' knowledge building process evidenced in time-stamped logs of a CSCL environment that consists of chat, shared whiteboard, and wiki features. The study was performed in a graduate level course, which covers online assignments that expect students to…

Electrification of buildings and industry in the United States: Drivers, barriers, prospects, and policy approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deason, Jeff; Wei, Max; Leventis, Greg

The report offers several use cases and case studies of electrification in buildings and industry: air source heat pumps for space heating, zero net energy buildings, electric water heaters and demand response, electric arc furnaces, and electric boilers. Finally, the report suggests several areas for further research to better understand and advance beneficial electrification.

Design and operational energy studies in a new high-rise office building. Volume 4. Building automation analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-03-01

The objectives of the analysis are to evaluate the application of a number of building automation system capabilities using the Park Plaza Building as a case study. The study looks at the energy and cost effectiveness of some energy management strategies of the building automation system as well as some energy management strategies that are not currently a part of the building automation system. The strategies are also evaluated in terms of their reliability and usefulness in this building.

Mentoring Postsecondary Tenure-Track Faculty: A Theory-Building Case Study and Implications for Institutional Policy

ERIC Educational Resources Information Center

Davis, Dannielle Joy; Boyer, Patricia; Russell, Isela

2011-01-01

The featured research uses theory-building case study to understand the experiences of junior faculty in a mentoring program. Findings suggest the importance of professional interaction for faculty members' integration into their campus communities. An explanatory model illustrates the findings and supplements discussion of the implications for…

Building a Faculty Publications Database: A Case Study

ERIC Educational Resources Information Center

Tabaei, Sara; Schaffer, Yitzchak; McMurray, Gregory; Simon, Bashe

2013-01-01

This case study shares the experience of building an in-house faculty publications database that was spearheaded by the Touro College and University System library in 2010. The project began with the intention of contributing to the college by collecting the research accomplishments of our faculty and staff, thereby also increasing library…

Technology Solutions Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This case study by the U.S. Department of Energy’s Building America research team Building Science Corporation is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, Florida; zone 2A), insulated with air-permeable insulation (netted and blown fiberglass).

Innovation in the Management of Primary School Construction in Afghanistan. A Case Study. Educational Building Report 9.

ERIC Educational Resources Information Center

Ahmad, Fazel

By 1973 there were very great disparities between the opportunities for education in the urban and rural areas of Afghanistan. This case study concerns provincial school construction programs for hundreds of small buildings in the remotest areas of what is one of the most mountainous countries of the world. A study proposed alternative building…

Environmental Comfort in School Buildings: A Case Study of Awareness and Participation of Users

ERIC Educational Resources Information Center

Bernardi, Nubia; Kowaltowski, Doris C. C. K.

2006-01-01

This article describes the results of a study on user behavior in relation to environmental comfort conditions. A case study was conducted in school buildings in the region of the city of Campinas, So Paulo, Brazil. The methodology adopted was based on field observations of technical aspects of the school environment and of types of user behavior…

Technology Solutions Case Study: Retrofit Measures for Embedded Wood Members in Insulated Mass Masonry Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

K. Ueno

2015-10-01

In this project, the Building Science Corporation team studied a historic brick building in Lawrence, Massachusetts, which is being renovated into 10 condominium units and adding insulation to the interior side of walls of such masonry buildings.

The Challenges of Institutional Research in Building a Culture of Evidence: A Case Study

ERIC Educational Resources Information Center

Goomas, David T.; Isbell, Teresa

2015-01-01

The process of building a culture of evidence involves using data to understand where students are experiencing problems, designing strategies for remedying those problems, implementing them, and then evaluating the effectiveness of those implemented strategies. This case study is about two programs that were implemented within the last two years…

The Effectiveness of Taiwan Building Energy Regulation under the influence of Future Climate

NASA Astrophysics Data System (ADS)

Weng, Yu-Teng; Huang, Kuo-Tsang

2017-04-01

Building energy consumption comprises circa 40% of the national annual energy usage in Taiwan, and the majority proportion is attributed to the cooling apparatus usage. As cooling energy is closely related to the outdoor climate, it is expected that the future global climate change would amplify its demand. Considering the building energy regulation criteria are the minimum requirements that the building has to be complied with, this study tried to investigate whether the current building energy regulation in Taiwan, initiated in 2013, would still be capable of maintaining the energy use in the future as today's level. The research adopted EnergyPlus to simulate the annual cooling energy use of several virtual office building cases with the constructed hourly future weather data under future climate change scenarios of RCP45 and RCP85 defined by IPCC. The virtual building cases are generated by a structured orthogonal array with each case is constituted by 10 building design parameters. The results revealed that the building energy consumption based on the current regulation criteria failed to maintain at the same level in the future as oppose to nowadays. By comparing to the current cooling energy usage, it would rise by 13% and 22% in RCP45 and RCP85, respectively, at the end of this century. This research further parametrically studied the potential cooling energy mitigation strategies and proposed effective building envelope design schemes in order to neutralize the future building energy increase.

Examining the impact of lahars on buildings using numerical modelling

NASA Astrophysics Data System (ADS)

Mead, Stuart R.; Magill, Christina; Lemiale, Vincent; Thouret, Jean-Claude; Prakash, Mahesh

2017-05-01

Lahars are volcanic flows containing a mixture of fluid and sediment which have the potential to cause significant damage to buildings, critical infrastructure and human life. The extent of this damage is controlled by properties of the lahar, location of elements at risk and susceptibility of these elements to the lahar. Here we focus on understanding lahar-induced building damage. Quantification of building damage can be difficult due to the complexity of lahar behaviour (hazard), varying number and type of buildings exposed to the lahar (exposure) and the uncertain susceptibility of buildings to lahar impacts (vulnerability). In this paper, we quantify and examine the importance of lahar hazard, exposure and vulnerability in determining building damage with reference to a case study in the city of Arequipa, Peru. Numerical modelling is used to investigate lahar properties that are important in determining the inundation area and forces applied to buildings. Building vulnerability is quantified through the development of critical depth-pressure curves based on the ultimate bending moment of masonry structures. In the case study area, results suggest that building strength plays a minor role in determining overall building losses in comparison to the effects of building exposure and hydraulic characteristics of the lahar.

Strategies for Relationship and Trust Building by Successful Superintendents: A Case Study

ERIC Educational Resources Information Center

Huang, Leann L.

2012-01-01

The purpose of this study was to identify strategies and behaviors that successful superintendents used to build strong relationships and trust with their boards within their entry period. The three research questions were developed to guide this study: 1. What strategies and behaviors were successful superintendents using to build strong…

How Educators Define Their Role: Building 'Professional' Relationships with Children and Parents during Transition to Childcare: A Case Study

ERIC Educational Resources Information Center

Hostettler Schärer, Janine

2018-01-01

Using case study methodology including weekly focus group meetings and individual interviews, this article reports results of a study in a Canadian childcare centre in which four educators shared their attitudes and experiences on their role as educators and on building relationships with the children transitioning into their care and their…

The Legacy Project: A Case Study of Civic Capacity Building and Transformative Educational Leadership in a Community-Based Academic Enrichment Program

ERIC Educational Resources Information Center

Didlick-Davis, Celeste R.

2016-01-01

This study examines how a grassroots educational enrichment program in a small urban economically depressed area builds and uses civic capacity. Using qualitative data collected through a case study of the Legacy Academic Enrichment program in Middletown, Ohio, I identify factors that make Legacy sustainable and successful in a community that has…

Evaluating hospital design from an operations management perspective.

PubMed

Vos, Leti; Groothuis, Siebren; van Merode, Godefridus G

2007-12-01

This paper describes an evaluation method for the assessment of hospital building design from the viewpoint of operations management to assure that the building design supports the efficient and effective operating of care processes now and in the future. The different steps of the method are illustrated by a case study. In the case study an experimental design is applied to assess the effect of used logistical concepts, patient mix and technologies. The study shows that the evaluation method provides a valuable tool for the assessment of both functionality and the ability to meet future developments in operational control of a building design.

Optimal management program for asbestos containing building materials to be available in the event of a disaster.

PubMed

Kim, Young-Chan; Hong, Won-Hwa

2017-06-01

The safe management and disposal of asbestos is a matter of considerable importance. A large number of studies have been undertaken to quantify the issue of waste management following a disaster. Nevertheless, there have been few (if any) studies concerning asbestos waste, covering the amount generated, the cost of disposal, and the degree of hazard incurred. Thus, the current study focuses on developing a program for the management of Asbestos Containing Building Materials (ACBMs), which form the source of asbestos waste in the event of a disaster. The study will also discuss a case study undertaken in a specific region in Korea in terms of: (1) the location of ACBM-containing buildings; (2) types and quantities of ACBMs; (3) the cost of ACBM disposal; (4) the amount of asbestos fiber present during normal times and during post-disaster periods; (5) the required order in which ACBM-containing buildings should be dismantled; and (6) additional greenhouse gases generated during ACBM removal. The case study will focus on a specific building, with an area of 35.34m 2 , and will analyze information concerning the abovementioned points. In addition, the case study will focus on a selected area (108 buildings) and the administrative district (21,063 buildings). The significance of the program can be established by the fact that it visibly transmits information concerning ACBM management. It is a highly promising program, with a widespread application for the safe management and optimal disposal of asbestos in terms of technology, policy, and methodology. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technology Solutions Case Study: Cost Analysis of Roof-Only Air Sealing and Insulation Strategies on 1-1/2 Story Homes in Cold Climates, Minneapolis, MN

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This case study describes the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership. This system is typically used in deep energy retrofits and is a valuable approach for the roof-only portions of existing homes, particularly the 1 1/2-story home. It is effective in reducing energy loss through the building envelope, improving building durability, reducing ice dams, and providing opportunities to improve occupant comfort and health.

Energy Efficiency of Higher Education Buildings: A Case Study

ERIC Educational Resources Information Center

Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

2015-01-01

Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

BacNet and Analog/Digital Interfaces of the Building Controls Virtual Testbed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nouidui, Thierry Stephane; Wetter, Michael; Li, Zhengwei

2011-11-01

This paper gives an overview of recent developments in the Building Controls Virtual Test Bed (BCVTB), a framework for co-simulation and hardware-in-the-loop. First, a general overview of the BCVTB is presented. Second, we describe the BACnet interface, a link which has been implemented to couple BACnet devices to the BCVTB. We present a case study where the interface was used to couple a whole building simulation program to a building control system to assess in real-time the performance of a real building. Third, we present the ADInterfaceMCC, an analog/digital interface that allows a USB-based analog/digital converter to be linked tomore » the BCVTB. In a case study, we show how the link was used to couple the analog/digital converter to a building simulation model for local loop control.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. Through Building America research and other innovative programs throughout the country, many of the technical challenges to building to the ZERH standard have been addressed. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, CA. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovationmore » worked with Mutual Housing throughout the project. The case study discusses challenges encountered, lessons learned, and how obstacles were overcome. An objective of this project was to gain a highly visible foothold for residential buildings built to the DOE ZERH specification that can be used to encourage participation by other California builders.« less

Innovative and Workable Ideas for Building Schools. Public/Private Partnerships: A New Way To Fund and Build Schools.

ERIC Educational Resources Information Center

Guhse, David

This report presents case studies illustrating successful public-private financing of school construction. The efforts occurred in Canada, Florida, South Carolina, New York, the District of Columbia, and Texas. The case studies are offered to encourage policy makers in Virginia to consider such an approach to meet the state's school construction…

Forensic entomology of high-rise buildings in Malaysia: Three case reports.

PubMed

Syamsa, R A; Omar, B; Zuha, R M; Faridah, M N; Swarhib, M S; Hidayatulfathi, O; Shahrom, A W

2015-06-01

The distributions of flies are not only confined to ground level but can also be at higher altitudes. Here, we report three forensic cases involving dipterans in high-rise buildings in Kuala Lumpur, Malaysia. Case 1 involved a corpse of adult female found at the top floor of a fifteen-story apartment. Case 2 dealt with a body of a 75-year-old female discovered in a bedroom on the eleventh floor of an eighteen-story building, while Case 3 was a 52-year-old male found in his fifth floor shop house. Interestingly, entomological analysis revealed that all corpses were infested with similar Dipterans: Megaselia scalaris (Loew) (Diptera: Phoridae), Synthesiomyia nudiseta (Wulp) (Diptera: Muscidae) and sarcophagid (Diptera: Sarcophagidae). The first two species were commonly associated with corpses found indoors at ground level. We noted the additional occurrence of blowflies Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) and Chrysomya rufifacies Macquart (Diptera: Calliphoridae) larvae in Case 2 and Case 3, respectively. Findings from this study are significant as they demonstrate that certain groups of fly can locate dead bodies even in high-rise buildings. Forensic entomofauna research on corpses found at high elevation is scarce and our study has highlighted the peculiarity of the fly species involved in Malaysia.

Infography use to requirements specification for the design of the building

NASA Astrophysics Data System (ADS)

Losev, Konstantin; Sinenko, Sergey

2017-10-01

The study contributes to a growing body of research Transport infrastructure in a construction object life cycle management and presents areas in which further investigation is needed. The object of study are Railway buildings and structures and the Employer’s information requirements (EIR) for design of individual residential building. The task of the study was to determine necessary and sufficient scope of parameters which contained in inforaphic form of EIR comparing with traditional text form of EIR. Also, the task was to determine what categories of the traditional EIR are transferred to an infographic representation form and what categories are ignored in case of a relatively low complexity building. Methods that have been used in the study were infographical representation of text and further expert evaluation. Conclusions of the study present the necessary and sufficient scope of parameters for inforaphic form of EIR, the relations between infographic parameters and categories of the EIR traditional form and subcategories of the traditional EIR that are ignored in case of a relatively low complexity building.

[The development of evaluation capacity in primary healthcare management: a case study in Santa Catarina State, Brazil, 2008-2011].

PubMed

Nickel, Daniela Alba; Calvo, Maria Cristina Marino; Natal, Sonia; Freitas, Sérgio Fernando Torres de; Hartz, Zulmira Maria de Araújo

2014-04-01

This article analyzes evaluation capacity-building based on the case study of a State Health Secretariat participating in the Project to Strengthen the Technical Capacity of State Health Secretariats in Monitoring and Evaluating Primary Healthcare. The case study adopted a mixed design with information from documents, semi-structured interviews, and evaluation of primary care by the State Health Secretariat in 2008-2011. Process analysis was used to identify the logical events that contributed to evaluation capacity-building, with two categories: evaluation capacity-building events and events for building organizational structure. The logical chain of events was formed by negotiation and agreement on the decision-making levels for the continuity of evaluation, data collection and analysis by the State Health Secretariat, a change in key indicators, restructuring of the evaluation matrix, and communication of the results to the municipalities. The three-way analysis showed that the aim of developing evaluation capacity was achieved.

Knotworking and the Visibilization of Learning in Building Design

ERIC Educational Resources Information Center

Kerosuo, Hannele; Mäki, Tarja; Korpela, Jenni

2015-01-01

Purpose: This paper aims to study the visibilization of learning in the context of developing a new collaborative practice, knotworking, in building design. The case under study describes the process of learning from the initiation of knotworking to its experimentation. The implementation of new building information modeling tools acted as an…

Energy Design Analysis and Evaluation of a Proposed Air Rescue and Fire Fighting Administration Building for Teterboro Airport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, B.; Pless, S.; Talbert, B.

2003-07-01

A new/proposed building for the Teterboro Airport was selected as a case study for High Performance Building Initiative research efforts. This report documents research-level energy analysis conducted on the Teterboro Airport building during predesign and design phases of the project.

Estimates of associated outdoor particulate matter health risk and costs reductions from alternative building, ventilation and filtration scenarios.

PubMed

Sultan, Zuraimi M

2007-05-01

Although many studies have reported calculations of outdoor particulate matter (PM) associated externalities using ambient data, there is little information on the role buildings, their ventilation and filtration play. This study provides the framework to evaluate the health risk and cost reduction of building, ventilation and filtration strategies from outdoor PM pollution on a nationwide level and applied it to a case study in Singapore. Combining Indoor Air Quality (IAQ) and time weighted exposure models, with established concentration-response functions and monetary valuation methods, mortality and morbidity effects of outdoor PM on the population of Singapore under different building, ventilation and filtration strategies were estimated. Different interventions were made to compare the effects from the current building conditions. The findings demonstrate that building protection effect reduced approximately half the attributable health cases amounting to US$17.7 billion due to PM pollution when compared to levels computed using outdoor data alone. For residential buildings, nationwide adoption of natural ventilation from current state is associated with 28% higher cases of mortality and 13 to 38% higher cases for different morbidities, amounting to US$6.7 billion. The incurred cost is negligible compared to energy costs of air-conditioning. However, nationwide adoption of closed residence and air-conditioning are associated with outcomes including fewer mortality (10 and 6% respectively), fewer morbidities (8 and 4% respectively) and economic savings of US$1.5 and 0.9 billion respectively. The related savings were about a factor of 9 the energy cost for air-conditioning. Nationwide adoption of mechanical ventilation and filtration from current natural ventilation in schools is associated with fewer asthma hospital admissions and exacerbations; although the economic impact is not substantial. Enhanced workplace filtration reduces the mortality and morbidity cases by 14 and 13% respectively amounting to savings of up to US$2.4 billion. The huge costs savings are comparable to the average worker salary and insignificant to energy, installation and rental cost. Despite uncertainty about accurate benefits, this study shows that health and economic gain via different building, ventilation and filtration designs in minimizing ingress of outdoor PM applied to a nationwide scale can be very large. Importantly, the results suggest that PM associated externalities and legislative efforts should not only focus on ambient PM reduction policies but also include building-informed decisions.

Indicators of sustainable capacity building for health research: analysis of four African case studies.

PubMed

Bates, Imelda; Taegtmeyer, Miriam; Squire, S Bertel; Ansong, Daniel; Nhlema-Simwaka, Bertha; Baba, Amuda; Theobald, Sally

2011-03-28

Despite substantial investment in health capacity building in developing countries, evaluations of capacity building effectiveness are scarce. By analysing projects in Africa that had successfully built sustainable capacity, we aimed to identify evidence that could indicate that capacity building was likely to be sustainable. Four projects were selected as case studies using pre-determined criteria, including the achievement of sustainable capacity. By mapping the capacity building activities in each case study onto a framework previously used for evaluating health research capacity in Ghana, we were able to identify activities that were common to all projects. We used these activities to derive indicators which could be used in other projects to monitor progress towards building sustainable research capacity. Indicators of sustainable capacity building increased in complexity as projects matured and included- early engagement of stakeholders; explicit plans for scale up; strategies for influencing policies; quality assessments (awareness and experiential stages)- improved resources; institutionalisation of activities; innovation (expansion stage)- funding for core activities secured; management and decision-making led by southern partners (consolidation stage).Projects became sustainable after a median of 66 months. The main challenges to achieving sustainability were high turnover of staff and stakeholders, and difficulties in embedding new activities into existing systems, securing funding and influencing policy development. Our indicators of sustainable capacity building need to be tested prospectively in a variety of projects to assess their usefulness. For each project the evidence required to show that indicators have been achieved should evolve with the project and they should be determined prospectively in collaboration with stakeholders.

A Disability and Health Institutional Research Capacity Building and Infrastructure Model Evaluation: A Tribal College-Based Case Study

ERIC Educational Resources Information Center

Moore, Corey L.; Manyibe, Edward O.; Sanders, Perry; Aref, Fariborz; Washington, Andre L.; Robertson, Cherjuan Y.

2017-01-01

Purpose: The purpose of this multimethod study was to evaluate the institutional research capacity building and infrastructure model (IRCBIM), an emerging innovative and integrated approach designed to build, strengthen, and sustain adequate disability and health research capacity (i.e., research infrastructure and investigators' research skills)…

Enhancing Infant Mental Health Using a Capacity-Building Model: A Case Study of a Process Evaluation of the "Ready, Steady, Grow" Initiative

ERIC Educational Resources Information Center

O'Farrelly, Christine; Guerin, Suzanne; Victory, Gerard

2017-01-01

Infant mental health (IMH) is best promoted through a continuum of services underpinned by strong service capacity. However, service providers often lack fundamental IMH knowledge and skills. Using the Ready, Steady, Grow (RSG) initiative as a case study of a capacity-building model (P., Hawe, L., King, M., Noort, C., Jordens, & B., Llyod,…

Building a Better Applicant Pool--A Case Study of the Use of Predictive Modeling and Market Segmentation to Build and Enroll Better Pools of Students

ERIC Educational Resources Information Center

Herridge, Bart; Heil, Robert

2003-01-01

Predictive modeling has been a popular topic in higher education for the last few years. This case study shows an example of an effective use of modeling combined with market segmentation to strategically divide large, unmanageable prospect and inquiry pools and convert them into applicants, and eventually, enrolled students. (Contains 6 tables.)

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain.

PubMed

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-03-24

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors.

Building Scientific Confidence in the Development and ...

EPA Pesticide Factsheets

Building Scientific Confidence in the Development and Evaluation of Read-Across Using Tox21 Approaches Slide presentation at GlobalChem conference and workshop in Washington, DC on Case Study on Building Scientific Confidence in the Development and Evaluation of Read-Across Using Tox21 Approaches

Building Global Learning Communities

ERIC Educational Resources Information Center

Cochrane, Thomas; Buchem, Ilona; Camacho, Mar; Cronin, Catherine; Gordon, Averill; Keegan, Helen

2013-01-01

Within the background where education is increasingly driven by the economies of scale and research funding, we propose an alternative online open and connected framework (OOC) for building global learning communities using mobile social media. We critique a three year action research case study involving building collaborative global learning…

Scalable methodology for large scale building energy improvement: Relevance of calibration in model-based retrofit analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heo, Yeonsook; Augenbroe, Godfried; Graziano, Diane

2015-05-01

The increasing interest in retrofitting of existing buildings is motivated by the need to make a major contribution to enhancing building energy efficiency and reducing energy consumption and CO2 emission by the built environment. This paper examines the relevance of calibration in model-based analysis to support decision-making for energy and carbon efficiency retrofits of individual buildings and portfolios of buildings. The authors formulate a set of real retrofit decision-making situations and evaluate the role of calibration by using a case study that compares predictions and decisions from an uncalibrated model with those of a calibrated model. The case study illustratesmore » both the mechanics and outcomes of a practical alternative to the expert- and time-intense application of dynamic energy simulation models for large-scale retrofit decision-making under uncertainty.« less

Open building and flexibility in healthcare: strategies for shaping spaces for social aspects.

PubMed

Capolongo, Stefano; Buffoli, Maddalena; Nachiero, Dario; Tognolo, Chiara; Zanchi, Eleonora; Gola, Marco

2016-01-01

The fast development of technology and medicine influences the functioning of healthcare facilities as health promoter for the society, making the flexibility a fundamental requirement. Among the many ways to ensure adaptability, one that allows change without increasing the building's overall size is the Open Building approach. Starting from the analysis of the State-of-the-Art and many case-studies, eight parameters of evaluation were defined, appraising their relative importance through a weighting system defined with several experts. The resulting evaluation tool establishes in what measure healthcare facilities follow the Open Building principles. The tool is tested to ten case-studies, chosen for their flexible features, in order to determine his effectiveness and to identify projects' weaknesses and strengths. The results suggest that many Open Building's principles are already in use but, only through a good design thinking, it will be possible to guarantee architectures for health adaptable for future social challenges.

Development of Next Generation Energy Audit Protocols for the Rapid and Advanced Analysis of Building Energy Use

NASA Astrophysics Data System (ADS)

Hartley, Christopher Ahlvin

Current building energy auditing techniques are outdated and lack targeted, actionable information. These analyses only use one year's worth of monthly electricity and gas bills to define energy conservation and efficiency measures. These limited data sets cannot provide robust, directed energy reduction recommendations. The need is apparent for an overhaul of existing energy audit protocols to utilize all data that is available from the building's utility provider, installed energy management system (EMS), and sub-metering devices. This thesis analyzed the current state-of-the-art in energy audits, generated a next generation energy audit protocol, and conducted both audits types on four case study buildings to find out what additional information can be obtained from additional data sources and increased data gathering resolutions. Energy data from each case study building were collected using a variety of means including utility meters, whole building energy meters, EMS systems, and sub-metering devices. In addition to conducting an energy analysis for each case study building using the current and next generation energy audit protocols, two building energy models were created using the programs eQuest and EnergyPlus. The current and next generation energy audit protocol results were compared to one another upon completion. The results show that using the current audit protocols, only variations in season are apparent. Results from the developed next generation energy audit protocols show that in addition to seasonal variations, building heating, ventilation and air conditioning (HVAC) schedules, occupancy schedules, baseline and peak energy demand levels, and malfunctioning equipment can be found. This new protocol may also be used to quickly generate accurate building models because of the increased resolution that yields scheduling information. The developed next generation energy auditing protocol is scalable and can work for many building types across the United States, and perhaps the world.

Unofficial Road Building in the Amazon: Socioeconomic and Biophysical Explanations

NASA Technical Reports Server (NTRS)

Perz, Stephen G.; Caldas, Marcellus M.; Arima, Eugenio; Walker, Robert J.

2007-01-01

Roads have manifold social and environmental impacts, including regional development, social conflicts and habitat fragmentation. 'Road ecology' has emerged as an approach to evaluate the various ecological and hydrological impacts of roads. This article aims to complement road ecology by examining the socio-spatial processes of road building itself. Focusing on the Brazilian Amazon, a heavily-studied context due to forest fragmentation by roads, the authors consider non-state social actors who build 'unofficial roads' for the purpose of gaining access to natural resources to support livelihoods and community development. They examine four case studies of roads with distinct histories in order to explain the socio-spatial processes behind road building in terms of profit maximization, land tenure claims, co-operative and conflictive political ecologies, and constraints as well as opportunities afforded by the biophysical environment. The study cases illustrate the need for a multi-pronged theoretical approach to understanding road building, and call for more attention to the role of non-state actors in unofficial road construction.

Life cycle assessment: Existing building retrofit versus replacement

NASA Astrophysics Data System (ADS)

Darabi, Nura

The embodied energy in building materials constitutes a large part of the total energy required for any building (Thormark 2001, 429). In working to make buildings more energy efficient this needs to be considered. Integrating considerations about life cycle assessment for buildings and materials is one promising way to reduce the amount of energy consumption being used within the building sector and the environmental impacts associated with that energy. A life cycle assessment (LCA) model can be utilized to help evaluate the embodied energy in building materials in comparison to the buildings operational energy. This thesis takes into consideration the potential life cycle reductions in energy and CO2 emissions that can be made through an energy retrofit of an existing building verses demolition and replacement with a new energy efficient building. A 95,000 square foot institutional building built in the 1960`s was used as a case study for a building LCA, along with a calibrated energy model of the existing building created as part of a previous Masters of Building Science thesis. The chosen case study building was compared to 10 possible improvement options of either energy retrofit or replacement of the existing building with a higher energy performing building in order to see the life cycle relationship between embodied energy, operational energy, and C02 emissions. As a result of completing the LCA, it is shown under which scenarios building retrofit saves more energy over the lifespan of the building than replacement with new construction. It was calculated that energy retrofit of the chosen existing institutional building would reduce the amount of energy and C02 emissions associated with that building over its life span.

New Whole-House Solutions Case Study: Zero Energy Ready Home Multifamily Project: Mutual Housing at Spring Lake

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Springer and A. German

2015-09-01

Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, California. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovation worked with Mutual Housing throughout the project. An objective of this project was to gain a highly visible foothold for residential buildings built to themore » DOE ZERH specification that can be used to encourage participation by other California builders.« less

The Army Family Team Building Program: Facilitating a Transformative Learning Process--An Intrinsic Case Study

ERIC Educational Resources Information Center

Gall, Joseph A.

2009-01-01

This study sought to understand how the Army Family Team Building program influences self-reliance and self-sufficiency in Army spouses as they integrate into the Army community. The purpose of the Army Family Team Building program is to empower Army spouses with knowledge and skills, which foster well-being and improve quality of life. The…

Leading the Small Rural School in Iceland and Australia: Building Leadership Capacity

ERIC Educational Resources Information Center

Wildy, Helen; Siguräardóttir, Sigríäur Margrét; Faulkner, Robert

2014-01-01

This study builds on a set of Australian case studies exploring the impact of Place on the work of principals and of the importance of Place in the preparation and development of principals. The project compares the ways that principals in Iceland and Australia build leadership capacity in small rural schools. Leaders of small schools in both…

Curious chiral cases of caddisfly larvae: handed behavior, asymmetric forms, evolutionary history.

PubMed

Hinchliffe, Robert; Palmer, A R

2010-10-01

Studies of right-left asymmetries have yielded valuable insights into the mechanisms of both development and evolution. Larvae from several groups of caddisflies (Trichoptera) build portable asymmetrical cases within which they live. In nearly all species that build spiral-walled tubular cases, the direction of wall coiling is random (equal numbers of dextral and sinistral cases within species) whereas in all species that build helicospiral, snail-like cases the direction of coiling is exclusively dextral. Asymmetrical tubes result from handed behavior, and ∼20% of larvae removed from a spiral-walled, tubular case build a replacement case of opposite chirality. So handed behavior (and hence direction of tube-wall spiraling) is likely learned rather than determined genetically. Asymmetrical larval cases appear to have evolved at least seven times in the Trichoptera, five times as spiral-walled tubes and twice as snail-like helicospiral cases. Helicospiral cases may reduce vulnerability to predation by mimicking snail shells, whereas spiral arrangements of vegetation fragments in tube walls may be more robust mechanically than other arrangements, but experimental evidence is lacking. Within one family (Phryganeidae), one or perhaps two species exhibit an excess of sinistral-walled cases, suggesting that genes that bias handed behavior in a particular direction evolved after handed behaviors already existed (genetic assimilation). © The Author 2010. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved.

The Woodlands Metro Center energy study. Case studies of project planning and design for energy conservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-03-01

Appendix II of The Woodlands Metro Center Energy Study near Houston consists of the following: Metro Center Program, Conventional Plan Building Prototypes and Detail Parcel Analysis, Energy Plan Building Prototypes, and Energy Plan Detail Parcel Analysis.

The measures for achieving nZEB standard of retrofitted educational building for specific polish location - case study

NASA Astrophysics Data System (ADS)

Kwiatkowski, Jerzy; Mijakowski, Maciej; Trząski, Adrian

2017-11-01

Most of the EU member states have already set a definition of nZEB for new buildings and some of the countries also done it for existing buildings. As there is no definition of nZEB for existing buildings in Poland, the paper will include various considerations of such a standard. Next, a case study of educational building retrofitting to a proposed nZEB standard will be presented. The aim of the paper is to present what measures can be used in order to decrease energy consumption in existing building. The measures are divided into three parts: architectural and construction, installations and energy sources. Thus a complexity of the solutions are presented. As the nZEB standard is related to available energy sources, also an influence of local condition will be considered. Building chosen for analysis is located in an area under historic protection which makes the work even more difficult. It was proved that used solutions were chosen not only to reduce energy demand or increase energy production from renewable energy sources, but also to increase social and aesthetic features of the building.

Building America Case Study: Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-09-01

In multifamily hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution and controls. The effects of imbalance include tenant discomfort, higher energy use intensity and inefficient building operation. This paper explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs. The research was conducted by The Partnership for Advanced Residential Retrofit (PARR) in conjunction with Elevate Energy. The team surveyed existingmore » knowledge on cost-effective retrofits for optimizing distribution in typical multifamily hydronic systems, with the aim of identifying common situations and solutions, and then conducted case studies on two Chicago area buildings with known balancing issues in order to quantify the extent of temperature imbalance. At one of these buildings a booster pump was installed on a loop to an underheated wing of the building. This study found that unit temperature in a multifamily hydronic building can vary as much as 61 degrees F, particularly if windows are opened or tenants use intermittent supplemental heating sources like oven ranges. Average temperature spread at the building as a result of this retrofit decreased from 22.1 degrees F to 15.5 degrees F.« less

Commercial and Multifamily Building Tenant Energy Usage Aggregation and Privacy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Olga V.; Pulsipher, Trenton C.; Wang, Na

2014-11-17

In a number of cities and states, building owners are required to disclose and/or benchmark their building energy use. This requires the building owner to possess monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer data as a way to give building owners the whole-building energy usage data while protecting customer privacy. However, no utilities or regulators appear to have conducted a concerted statistical, cybersecurity, and privacy analysis to justify the level ofmore » aggregation selected. Therefore, the Tennant Data Aggregation Task was established to help utilities address these issues and provide recommendations as well as a theoretical justification of the aggregation threshold. This study is focused on the use case of submitting data for ENERGY STAR Portfolio Manager (ESPM), but it also looks at other potential use cases for monthly energy consumption data.« less

Analysis of Energy Consumption and Possibilities of Thermal-Modernization in Residential Buildings in Poland Case Study: The Town of Zielona Góra

NASA Astrophysics Data System (ADS)

Alsabry, A.; Truszkiewicz, P.; Szymański, K.; Łaskawiec, K.; Rojek, Ł.

2017-12-01

The article presents an analysis of buildings belonging the Department of Public Utilities and Housing in Zielona Góra. The research was based on a set of questions for building operators. The questionnaires consisted of 30 questions concerning general and detailed information about the buildings. In order to clearly present the results, this article includes data only about residential and residential-commercial buildings. Forty building built in different periods were selected for analysis.

Progress on Evaluating School Buildings in Scotland

ERIC Educational Resources Information Center

Thomson, Keith

2006-01-01

In June 2004, the Scottish Executive published guidance on evaluating completed school building projects, "Building Our Future: Scotland's School Estate," as part of the School Estate Strategy; the guidance included a case study evaluation at an Edinburgh primary school. The Executive is continuing to support evaluation work on the school estate…

Strengthening method of concrete structure

NASA Astrophysics Data System (ADS)

Inge, Wewin; Audrey; Nugroho, Sofie; Njo, Helen

2018-03-01

Building extension in Indonesia is not favored, and not many people know the advantages of the method because architects and engineers tend to lack the knowledge and experience. The aim of this paper is to explain a method on how to strengthen a concrete building structure that people can use/learn as a better way to cut potential cost and save time. The strengthening method explained in this paper is steel jacketing, providing a case study of this method in the extension of a restaurant located in Medan, Indonesia. In this study, engineers calculated that the tensile stress of the existing RC column and beam is not strong enough to reinforce the building extension applied load. Therefore, the steel jacketing method can be applied to improve the column and beam strength and ductility. The result of the case study proves that this is one of the best methods for building extension applied in Indonesia.

Near Zero Consumption Building as an Urban Acupuncture for a Vertical Slum. A Case Study in the City of Malaga, Spain

NASA Astrophysics Data System (ADS)

Rosa-Jiménez, Carlos; Nebot, Nuria; García Moreno, Alberto; José Márquez Ballesteros, María

2017-10-01

A vertical slum is defined as a socially vulnerable community in a building, with serious problems of functionality, safety and habitability. It is related to an important level of physical degradation, and a precarious socioeconomic situation of its occupants. Their inability to create a real community for proper and mandatory maintenance increases the physical deterioration of the building. The abandonment of the original owners of the houses can cause a system of illegal occupation and illegal activities, and vice versa. In many cases, the new occupants are primarily interested in maintaining the building in a state of precariousness in order to avoid any attempt of renovation by administrations. These security and habitability problems often extend outside the building and they affect a whole community of neighbours within the neighbourhood who feel threatened and insecure, causing their rejection and a strong social segregation in the area. This article wants to show some of the results from a research work developed on a case study of vertical slum in the city of Malaga, in Spain. In this context of marginality previously described, the research project explores different alternatives for the renovation of a building, its vulnerable community and the neighbourhood in which it is inserted. The project establishes four major objectives: (a) a physical renovation of the building, (b) social transformation in a disadvantaged environment, (c) functional evolution-from a residential model to a new hybrid model with a mixed supply of social services, and (d) the incorporation of new parameters of environmental sustainability that improve the energetic behaviour of the building (transforming it into a building of almost zero consumption). The research closes with a series of strategies and results for the case study. However, the main contribution of the work is related to the research methodology that has been developed. This is structured according to the four principles of integrated urban renovation, based on a physical, social, economic and environmental perspective. This methodology and results have been explained so that they can be transferred to other areas and experience of urban recycling in vulnerable social environments.

Evaluation of “Autotune” calibration against manual calibration of building energy models

DOE PAGES

Chaudhary, Gaurav; New, Joshua; Sanyal, Jibonananda; ...

2016-08-26

Our paper demonstrates the application of Autotune, a methodology aimed at automatically producing calibrated building energy models using measured data, in two case studies. In the first case, a building model is de-tuned by deliberately injecting faults into more than 60 parameters. This model was then calibrated using Autotune and its accuracy with respect to the original model was evaluated in terms of the industry-standard normalized mean bias error and coefficient of variation of root mean squared error metrics set forth in ASHRAE Guideline 14. In addition to whole-building energy consumption, outputs including lighting, plug load profiles, HVAC energy consumption,more » zone temperatures, and other variables were analyzed. In the second case, Autotune calibration is compared directly to experts’ manual calibration of an emulated-occupancy, full-size residential building with comparable calibration results in much less time. Lastly, our paper concludes with a discussion of the key strengths and weaknesses of auto-calibration approaches.« less

Fuzzy-Set Case Studies

ERIC Educational Resources Information Center

Mikkelsen, Kim Sass

2017-01-01

Contemporary case studies rely on verbal arguments and set theory to build or evaluate theoretical claims. While existing procedures excel in the use of qualitative information (information about kind), they ignore quantitative information (information about degree) at central points of the analysis. Effectively, contemporary case studies rely on…

Case Study: Student-Produced Videos for the Flipped Classroom

ERIC Educational Resources Information Center

Prud'homme-Genereux, Annie

2016-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue describes a way of building a library of student-produced videos to use in the flipped classroom.

The relative impacts of vegetation, topography and spatial arrangement on building loss to wildfires in case studies of California and Colorado

Treesearch

Patricia M. Alexandre; Susan I. Stewart; Miranda H. Mockrin; Nicholas S. Keuler; Alexandra D. Syphard; Avi Bar-Massada; Murray K. Clayton; Volker C. Radeloff

2015-01-01

Wildfires destroy thousands of buildings every year in the wildland urban interface. However, fire typically only destroys a fraction of the buildings within a given fire perimeter, suggesting more could be done to mitigate risk if we understood how to configure residential landscapes so that both people and buildings could survive fire.

Building unified geospatial data for land-change modeling—A case study in the area of Richmond, Virginia

USGS Publications Warehouse

Donato, David I.; Shapiro, Jason L.

2016-12-13

An effort to build a unified collection of geospatial data for use in land-change modeling (LCM) led to new insights into the requirements and challenges of building an LCM data infrastructure. A case study of data compilation and unification for the Richmond, Va., Metropolitan Statistical Area (MSA) delineated the problems of combining and unifying heterogeneous data from many independent localities such as counties and cities. The study also produced conclusions and recommendations for use by the national LCM community, emphasizing the critical need for simple, practical data standards and conventions for use by localities. This report contributes an uncopyrighted core glossary and a much needed operational definition of data unification.

Green Building Premium Cost Analysis in Indonesia Using Work Breakdown Structure Method

NASA Astrophysics Data System (ADS)

Basten, V.; Latief, Y.; Berawi, M. A.; Riswanto; Muliarto, H.

2018-03-01

The concept of green building in the construction industry is indispensable for mitigating environmental issues such as waste, pollution, and carbon emissions. There are some countries that have Green Building rating tools. Indonesia particularly is the country which has Greenship rating tools but the number of Green Building is relatively low. Development of building construction is depended on building investors or owner initiation, so this research is conducted to get the building aspects that have significant effect on the attractiveness using The Green Building Concept. The method in this research is work breakdown structure method that detailing the green building activities. The particular activities will be processed to get the cost elements for the green building achievement that it was targeted to improve better than conventional building. The final result of the study was a very significant work package on green building construction in the city of Indonesia case study.

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain

PubMed Central

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-01-01

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors. PMID:28338604

Building-to-Grid Integration through Commercial Building Portfolios Participating in Energy and Frequency Regulation Markets

NASA Astrophysics Data System (ADS)

Pavlak, Gregory S.

Building energy use is a significant contributing factor to growing worldwide energy demands. In pursuit of a sustainable energy future, commercial building operations must be intelligently integrated with the electric system to increase efficiency and enable renewable generation. Toward this end, a model-based methodology was developed to estimate the capability of commercial buildings to participate in frequency regulation ancillary service markets. This methodology was integrated into a supervisory model predictive controller to optimize building operation in consideration of energy prices, demand charges, and ancillary service revenue. The supervisory control problem was extended to building portfolios to evaluate opportunities for synergistic effect among multiple, centrally-optimized buildings. Simulation studies performed showed that the multi-market optimization was able to determine appropriate opportunities for buildings to provide frequency regulation. Total savings were increased by up to thirteen percentage points, depending on the simulation case. Furthermore, optimizing buildings as a portfolio achieved up to seven additional percentage points of savings, depending on the case. Enhanced energy and cost savings opportunities were observed by taking the novel perspective of optimizing building portfolios in multiple grid markets, motivating future pursuits of advanced control paradigms that enable a more intelligent electric grid.

Energy and exergy assessments for an enhanced use of energy in buildings

NASA Astrophysics Data System (ADS)

Goncalves, Pedro Manuel Ferreira

Exergy analysis has been found to be a useful method for improving the conversion efficiency of energy resources, since it helps to identify locations, types and true magnitudes of wastes and losses. It has also been applied for other purposes, such as distinguishing high- from low-quality energy sources or defining the engineering technological limits in designing more energy-efficient systems. In this doctoral thesis, the exergy analysis is widely applied in order to highlight and demonstrate it as a significant method of performing energy assessments of buildings and related energy supply systems. It aims to make the concept more familiar and accessible for building professionals and to encourage its wider use in engineering practice. Case study I aims to show the importance of exergy analysis in the energy performance assessment of eight space heating building options evaluated under different outdoor environmental conditions. This study is concerned with the so-called "reference state", which in this study is calculated using the average outdoor temperature for a given period of analysis. Primary energy and related exergy ratios are assessed and compared. Higher primary exergy ratios are obtained for low outdoor temperatures, while the primary energy ratios are assumed as constant for the same scenarios. The outcomes of this study demonstrate the significance of exergy analysis in comparison with energy analysis when different reference states are compared. Case study II and Case study III present two energy and exergy assessment studies applied to a hotel and a student accommodation building, respectively. Case study II compares the energy and exergy performance of the main end uses of a hotel building located in Coimbra in central Portugal, using data derived from an energy audit. Case study III uses data collected from energy utilities bills to estimate the energy and exergy performance associated to each building end use. Additionally, a set of energy supply options are proposed and assessed as primary energy demand and exergy efficiency, showing it as a possible benchmarking method for future legislative frameworks regarding the energy performance assessment of buildings. Case study IV proposes a set of complementary indicators for comparing cogeneration and separate heat and electricity production systems. It aims to identify the advantages of exergy analysis relative to energy analysis, giving particular examples where these advantages are significant. The results demonstrate that exergy analysis can reveal meaningful information that might not be accessible using a conventional energy analysis approach, which is particularly evident when cogeneration and separated systems provide heat at very different temperatures. Case study V follows the exergy analysis method to evaluate the energy and exergy performance of a desiccant cooling system, aiming to assess and locate irreversibilities sources. The results reveal that natural gas boiler is the most inefficient component of the plant in question, followed by the chiller and heating coil. A set of alternative heating supply options for desiccant wheel regeneration is proposed, showing that, while some renewables may effectively reduce the primary energy demand of the plant, although this may not correspond to the optimum level of exergy efficiency. The thermal and chemical exergy components of moist air are also evaluated, as well as, the influence of outdoor environmental conditions on the energy/exergy performance of the plant. This research provides knowledge that is essential for the future development of complementary energy- and exergy-based indicators, helping to improve the current methodologies on performance assessments of buildings, cogeneration and desiccant cooling systems. The significance of exergy analysis is demonstrated for different types of buildings, which may be located in different climates (reference states) and be supplied by different types of energy sources. (Abstract shortened by ProQuest.).

Analysis Thermal Comfort Condition in Complex Residential Building, Case Study: Chiangmai, Thailand

NASA Astrophysics Data System (ADS)

Juangjandee, Warangkana

2017-10-01

Due to the increasing need for complex residential buildings, it appears that people migrate into the high-density urban areas because the infrastructural facilities can be easily found in the modern metropolitan areas. Such rapid growth of urbanization creates congested residential buildings obstructing solar radiation and wind flow, whereas most urban residents spend 80-90% of their time indoor. Furthermore, the buildings were mostly built with average materials and construction detail. This causes high humidity condition for tenants that could promote mould growth. This study aims to analyse thermal comfort condition in complex residential building, Thailand for finding the passive solution to improve indoor air quality and respond to local conditions. The research methodology will be in two folds: 1) surveying on case study 2) analysis for finding the passive solution of reducing humidity indoor air The result of the survey indicated that the building need to find passive solution for solving humidity problem, that can be divided into two ways which raising ventilation and indoor temperature including increasing wind-flow ventilation and adjusting thermal temperature, for example; improving building design and stack driven ventilation. For raising indoor temperature or increasing mean radiant temperature, daylight can be passive solution for complex residential design for reducing humidity and enhance illumination indoor space simultaneous.

Evaluation of CNT Energy Savers Retrofit Packages Implemented in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farley, Jenne; Ruch, Russell

This evaluation explored the feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25%-30% source energy savings through the study of three case studies. There is an urgent need to scale up energy efficiency retrofitting of Chicago's multifamily buildings in order to address rising energy costs and a rapidly depleting rental stock. Aimed at retrofit program administrators and building science professionals, this research project investigates the possibility of using prescriptive retrofit packages as a time- and resource-effective approach to the process of retrofitting multifamily buildings.

Evaluation of CNT Energy Savers Retrofit Packages Implemented in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farley, Jenne; Ruch, Russell

This evaluation explored the feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25%-30% source energy savings through the study of three case studies. There is an urgent need to scale up energy efficiency retrofitting of Chicago's multifamily buildings in order to address rising energy costs and a rapidly depletingrental stock. Aimed at retrofit program administrators and building science professionals, this research project investigates the possibility of using prescriptive retrofit packages as a time- and resource-effective approach to the process of retrofitting multifamily buildings.

Sustaining Knowledge Building as a Principle-Based Innovation at an Elementary School

ERIC Educational Resources Information Center

Zhang, Jianwei; Hong, Huang-Yao; Scardamalia, Marlene; Teo, Chew Lee; Morley, Elizabeth A.

2011-01-01

This study explores Knowledge Building as a principle-based innovation at an elementary school and makes a case for a principle- versus procedure-based approach to educational innovation, supported by new knowledge media. Thirty-nine Knowledge Building initiatives, each focused on a curriculum theme and facilitated by nine teachers over eight…

Relationship Building One Step at a Time: Case Studies of Successful Faculty-Librarian Partnerships

ERIC Educational Resources Information Center

Díaz, José O.; Mandernach, Meris A.

2017-01-01

Building strong relationships between academic librarians and teaching faculty is paramount for promoting services and resources. While librarians face challenges ranging from new technologies to heightened expectations and fiscal difficulties, the key work remains in solid relationship building. Drawing on the experience of a group of subject…

Mechanism of concave ``tafoni'' and convex ``domal shape'' formation on TRIASSIC red sandstone of some old buildings, Chester City, UK, Case study

NASA Astrophysics Data System (ADS)

Kamh, G. M. E.

2005-08-01

The weathering factors act on the recent and archaeological sites through different processes based on the dominant environmental conditions. The net result of weathering is deformation of the original form of construction rock. In the current case study, the main aim is to find out the mechanism of formation of two different weathering forms recorded on many old buildings taking Chester City as a case study. The construction rock in the case study is arenitic sandstone with carbonate content ranging from 0.0 to 15.6%. The sandstone blocks are cemented together by hydraulic lime mortar that can easily be altered chemically to salts by acid rain that dominates at the study area. In case of mortar with worse geotechnical limits than the sandstone blocks, the net result is convex “domal” shape blocks, but in case of mortar with better geotechnical limits than the construction sandstone, the net result of weathering is tafoni “concave” weathering form.

Making lemonade from lemons: a case study on loss of space at the Dolph Briscoe, Jr. Library, University of Texas Health Science Center at San Antonio.

PubMed

Tobia, Rajia C; Feldman, Jonquil D

2010-01-01

The setting for this case study is the Dolph Briscoe, Jr. Library, University of Texas Health Science Center at San Antonio, a health sciences campus with medical, dental, nursing, health professions, and graduate schools. During 2008-2009, major renovations to the library building were completed including office space for a faculty development department, multipurpose classrooms, a 24/7 study area, study rooms, library staff office space, and an information commons. The impetus for changes to the library building was the decreasing need to house collections in an increasingly electronic environment, the need for office space for other departments, and growth of the student body. About 40% of the library building was remodeled or repurposed, with a loss of approximately 25% of the library's original space. Campus administration proposed changes to the library building, and librarians worked with administration, architects, and construction managers to seek renovation solutions that meshed with the library's educational mission.

Making lemonade from lemons: a case study on loss of space at the Dolph Briscoe, Jr. Library, University of Texas Health Science Center at San Antonio

PubMed Central

Tobia, Rajia C.; Feldman, Jonquil D.

2010-01-01

The setting for this case study is the Dolph Briscoe, Jr. Library, University of Texas Health Science Center at San Antonio, a health sciences campus with medical, dental, nursing, health professions, and graduate schools. During 2008–2009, major renovations to the library building were completed including office space for a faculty development department, multipurpose classrooms, a 24/7 study area, study rooms, library staff office space, and an information commons. The impetus for changes to the library building was the decreasing need to house collections in an increasingly electronic environment, the need for office space for other departments, and growth of the student body. About 40% of the library building was remodeled or repurposed, with a loss of approximately 25% of the library's original space. Campus administration proposed changes to the library building, and librarians worked with administration, architects, and construction managers to seek renovation solutions that meshed with the library's educational mission. PMID:20098652

A case study on the structural assessment of fire damaged building

NASA Astrophysics Data System (ADS)

Osman, M. H.; Sarbini, N. N.; Ibrahim, I. S.; Ma, C. K.; Ismail, M.; Mohd, M. F.

2017-11-01

This paper presents a case study on the structural assessment of building damaged by fire and discussed on the site investigations and test results prior to determine the existing condition of the building. The building was on fire for about one hour before it was extinguished. In order to ascertain the integrity of the building, a visual inspection was conducted for all elements (truss, beam, column and wall), followed by non-destructive, load and material tests. The load test was conducted to determine the ability of truss to resist service load, while the material test to determine the residual strength of the material. At the end of the investigation, a structural analysis was carried out to determine the new factor of safety by considering the residual strength. The highlighted was on the truss element due to steel behaviour that is hardly been predicted. Meanwhile, reinforced concrete elements (beam, column and wall) were found externally affected and caused its strength to be considered as sufficient for further used of building. The new factor of safety is equal to 2, considered as the minimum calculated value for the truss member. Therefore, this fire damaged building was found safe and can be used for further application.

An Intervention for Early Mathematical Success: Outcomes from the Hybrid Version of the Building Math Readiness Parents as Partners (MRPP) Project

ERIC Educational Resources Information Center

Kritzer, Karen L.; Pagliaro, Claudia M.

2013-01-01

The Building Math Readiness in Young Deaf/Hard-of-Hearing Children: Parents as Partners (MRPP) Project works with parents to increase the understanding of foundational mathematics concepts in their preschool deaf/hard-of-hearing (d/hh) children in preparation for formal mathematics education. A multiple-case/single-unit case study incorporating…

High-resolution modeling of tsunami run-up flooding: a case study of flooding in Kamaishi city, Japan, induced by the 2011 Tohoku tsunami

NASA Astrophysics Data System (ADS)

Akoh, Ryosuke; Ishikawa, Tadaharu; Kojima, Takashi; Tomaru, Mahito; Maeno, Shiro

2017-11-01

Run-up processes of the 2011 Tohoku tsunami into the city of Kamaishi, Japan, were simulated numerically using 2-D shallow water equations with a new treatment of building footprints. The model imposes an internal hydraulic condition of permeable and impermeable walls at the building footprint outline on unstructured triangular meshes. Digital data of the building footprint approximated by polygons were overlaid on a 1.0 m resolution terrain model. The hydraulic boundary conditions were ascertained using conventional tsunami propagation calculation from the seismic center to nearshore areas. Run-up flow calculations were conducted under the same hydraulic conditions for several cases having different building permeabilities. Comparison of computation results with field data suggests that the case with a small amount of wall permeability gives better agreement than the case with impermeable condition. Spatial mapping of an indicator for run-up flow intensity (IF = (hU2)max, where h and U respectively denote the inundation depth and flow velocity during the flood, shows fairly good correlation with the distribution of houses destroyed by flooding. As a possible mitigation measure, the influence of the buildings on the flow was assessed using a numerical experiment for solid buildings arrayed alternately in two lines along the coast. Results show that the buildings can prevent seawater from flowing straight to the city center while maintaining access to the sea.

Requirements Engineering in Building Climate Science Software

ERIC Educational Resources Information Center

Batcheller, Archer L.

2011-01-01

Software has an important role in supporting scientific work. This dissertation studies teams that build scientific software, focusing on the way that they determine what the software should do. These requirements engineering processes are investigated through three case studies of climate science software projects. The Earth System Modeling…

Simple approach in understanding interzeolite transformations using ring building units

NASA Astrophysics Data System (ADS)

Suhendar, D.; Buchari; Mukti, R. R.; Ismunandar

2018-04-01

Recently, there are two general approaches used in understanding interzeolite transformations, thermodynamically represented by framework density (FD) and kinetically by structural building units. Two types of structural building units are composite building units (CBU’s) and secondary building units (SBU’s). This study aims to examine the approaches by using interzeolite transformation data available in literature and propose a possible alternative approach. From a number of cases of zeolite transformation, the FD and CBU approach are not suitable for use. The FD approach fails in cases involving zeolite parents that have moderate or high FD’s, while CBU approach fails because of CBU’s unavailability in parent zeolites compared with CBU’s in their transformation products. The SBU approach is most likely to fit because SBU’s are units that have basic form of ring structures and closer to the state and shape of oligomeric fragments present in zeolite synthesis or dissolution cases. Thus, a new approach can be considered in understanding the interzeolite transformation, namely the ring building unit (RBU) approach. The advantage of RBU approach is RBU’s can be easily derived from all framework types, but in SBU approach there are several types of frameworks that cannot be expressed in SBU forms.

Study on post occupancy evaluation after remodeling in accordance with the `green remodeling certification standards of existing non-residential buildings'- Focusing on the case of H building

NASA Astrophysics Data System (ADS)

Cho, Kyungjoo; Cho, Dongwoo; Yoon, Yosun

2018-06-01

South Korea has adopted the Paris Convention and promised to reduce greenhouse gas emissions by 37% from business-as-usual (BAU) levels in the `First Basic Plan to Respond to Climate Change'. The reduction goal of greenhouse gas cannot be achieved considering only new buildings; the analysis results shows that the reduction of greenhouse gas emissions from existing buildings is essential. `The Green Remodeling Certification Standards', established in South Korea in 2016, is in line with the above plan. The post-occupancy evaluation (POE) of remodeled buildings after applying the `Green Remodeling Certification Standards of Existing Buildings' must be studied for expansion of this scheme. The study results are expected to be used as foundational data for the promotion of remodeling existing buildings.

The Woodworker's Website: A Project Management Case Study

ERIC Educational Resources Information Center

Jance, Marsha

2014-01-01

A case study that focuses on building a website for a woodworking business is discussed. Project management and linear programming techniques can be used to determine the time required to complete the website project discussed in the case. This case can be assigned to students in an undergraduate or graduate decision modeling or management science…

Best Practices Case Study: Shaw Construction Burlingame Ranch Ph.1, Aspen, CO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pacific Northwest National Laboratory & Oak Ridge National Laboratory

Shaw Construction built 84 energy efficient, affordable condominiums forthe City of Aspen that achieved HERS scores of less than 62 with help from Building America’s research team lead Building Science Corporation.

Building Capacity to Use Earth Observations in Decision Making: A Case Study of NASA's DEVELOP National Program Methods and Best Practices

NASA Astrophysics Data System (ADS)

Childs-Gleason, L. M.; Ross, K. W.; Crepps, G.; Miller, T. N.; Favors, J. E.; Rogers, L.; Allsbrook, K. N.; Bender, M. R.; Ruiz, M. L.

2015-12-01

NASA's DEVELOP National Program fosters an immersive research environment for dual capacity building. Through rapid feasibility Earth science projects, the future workforce and current decision makers are engaged in research projects to build skills and capabilities to use Earth observation in environmental management and policy making. DEVELOP conducts over 80 projects annually, successfully building skills through partnerships with over 150 organizations and providing over 350 opportunities for project participants each year. Filling a void between short-term training courses and long-term research projects, the DEVELOP model has been successful in supporting state, local, federal and international government organizations to adopt methodologies and enhance decision making processes. This presentation will highlight programmatic best practices, feedback from participants and partner organizations, and three sample case studies of successful adoption of methods in the decision making process.

Building Early Learning Leaders: New Jersey's PreK-3rd Leadership Training. A Case Study

ERIC Educational Resources Information Center

Rice, Cynthia; Costanza, Vincent

2011-01-01

New Jersey school administrators are finding themselves in need of the supports necessary to build on the state's existing model preschools toward a broader vision of early learning, including making strong connections to the early learning system. Clearly, changing the educational mindset and building the related capacity of front-line leaders is…

Measuring Thermal Performance of Building Envelopes: Nine Case Studies,

DTIC Science & Technology

1985-03-01

inch P/B = 11.36, present worth factor for an es- of expanded polystyrene insulation) to the build- calating series for a 15-year period ing exterior...inch of The one MCA building roof we measured was a expanded polystyrene at R-3.6 per inch. Where the cathedral system with a sloped built-up roofing

[STRATEGY OF USE AND MAINTENANCE OF CLINICAL HOSPITAL CENTER RIJEKA IN ACCORDANCE WITH KEY PERFORMANCE INDICATORS FOR STRATEGIC HEALTHCARE FACILITIES MAINTENANCE].

PubMed

Sjekavica, Mariela; Haller, Herman; Cerić, Anita

2015-01-01

Building usage is the phase in the building life cycle that is most time-consuming, most functional, most significant due to building purpose and often systematically ignored. Maintenance is the set of activities that ensure the planned duration of facility exploitation phase in accordance with the requirements for quality maintenance of a large number of important building features as well as other elements immanent to the nature of facilities' life. The aim of the study is to show the analysis of the current state of organized, planned and comprehensive managerial approach in hospital utilization and maintenance in the Republic of Croatia, given on the case study of Clinical hospital center in Rijeka. The methodology used consists of relevant literature section of theory of facility utilization, maintenance and management in general, hospital buildings especially, display of practice on case study, and comparison of key performance indicators values obtained through interview with those that author Igal M. Shohet defined in his study by field surveys and statistical analyses. Despite many positive indicators of Clinical hospital center Rijeka maintenance, an additional research is needed in order to define a more complete national hospital maintenance strategy.

Making a Case for Case-Based Teaching in Data Literacy

ERIC Educational Resources Information Center

Riddle, Derek R.; Beck, Jori S.; Morgan, Joseph John; Brown, Nancy; Whitesides, Heather

2017-01-01

Building on a study conducted by the authors, this article provides strategies for teaching data literacy and outlines the case-based teaching method as an effective way of developing data-literate teachers.

Single-Case Design Research: Building the Evidence-Base in the Field of Education of Deaf and Hard of Hearing Students

ERIC Educational Resources Information Center

Cannon, Joanna E.; Guardino, Caroline; Antia, Shirin D.; Luckner, John L.

2015-01-01

The field of education of deaf and hard of hearing (DHH) students has a paucity of evidence-based practices (EBPs) to guide instruction. The authors discussed how the research methodology of single-case design (SCD) can be used to build EBPs through direct and systematic replication of studies. An overview of SCD research methods is presented,…

"Look It, This Is How You Know:" Family Forest Walks as a Context for Knowledge-Building about the Natural World

ERIC Educational Resources Information Center

Marin, Ananda; Bang, Megan

2018-01-01

This case study focuses on a Native American family's experience on a walk in an urban forest preserve. Drawing on interaction analysis traditions, we analyze video data and transcript data to characterize how learning unfolds in place, in this case an urban forest. We build on this analysis, as well as the work of Indigenous scholars, to…

An insight into actual energy use and its drivers in high-performance buildings

DOE PAGES

Li, Cheng; Hong, Tianzhen; Yan, Da

2014-07-12

Using portfolio analysis and individual detailed case studies, we studied the energy performance and drivers of energy use in 51 high-performance office buildings in the U.S., Europe, China, and other parts of Asia. Portfolio analyses revealed that actual site energy use intensity (EUI) of the study buildings varied by a factor of as much as 11, indicating significant variation in real energy use in HPBs worldwide. Nearly half of the buildings did not meet the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) Standard 90.1-2004 energy target, raising questions about whether a building’s certification as high performing accuratelymore » indicates that a building is energy efficient and suggesting that improvement in the design and operation of HPBs is needed to realize their energy-saving potential. We studied the influence of climate, building size, and building technologies on building energy performance and found that although all are important, none are decisive factors in building energy use. EUIs were widely scattered in all climate zones. There was a trend toward low energy use in small buildings, but the correlation was not absolute; some small HPBs exhibited high energy use, and some large HPBs exhibited low energy use. We were unable to identify a set of efficient technologies that correlated directly to low EUIs. In two case studies, we investigated the influence of occupant behavior as well as operation and maintenance on energy performance and found that both play significant roles in realizing energy savings. We conclude that no single factor determines the actual energy performance of HPBs, and adding multiple efficient technologies does not necessarily improve building energy performance; therefore, an integrated design approach that takes account of climate, technology, occupant behavior, and operations and maintenance practices should be implemented to maximize energy savings in HPBs. As a result, these findings are intended to help architects, engineers, operators, and policy makers improve the design and operation of HPBs.« less

The effects of tunnel horizontal distance on the vertical deformations of an adjacent building

NASA Astrophysics Data System (ADS)

Balkaya, Müge

2015-12-01

Due to the rapid development of urbanization and the need for effective transportation, it became a common application to construct subway tunnels in modern cities. However, these construction activities may lead to undesirable deformations on the adjacent buildings. In this study, the effect of tunnel horizontal distance on the deformations of an adjacent building is investigated using 2D finite element analysis. The results of the finite element analysis showed that, although high settlement values were not observed for the cases investigated in this study, the vertical deformations of the building decreased as the tunnel moved away from the building.

Prevalence of building-related symptoms as an indicator of health and productivity.

PubMed

Niemelä, Raimo; Seppänen, Olli; Korhonen, Pirjo; Reijula, Kari

2006-10-01

The prevalence of building-related symptoms (BRS) is commonly used to characterize the indoor air quality in office buildings. To analyze the costs of building renovation and the improvement of the indoor environment, it is useful to quantitatively relate the prevalence or intensity of BRS to productivity. The intent of this study is to summarize the links between the BRS and productivity, and demonstrate this linkage in two case buildings. A literature was surveyed for studies that measured simultaneously the prevalence or intensity of BRS and subjectively reported or objectively measured productivity. Case studies in two office environments were performed. An association between the prevalence of BRS and productivity of workers in a call center and in an insurance office were investigated. In the first case study, the productivity was expressed using the direct productivity metrics, namely the number of telephone contacts during active working hours while in the second case, the productivity was assessed by using the data concerning sick leave rates. Employees who report more BRS also have more often absences which relate to indoor environment quality (IEQ). Their productivity is lower than those who have better IEQ in their offices. Despite uncertainties related to the data concerning recorded sick leave and self-reported productivity, the number of studies showing an association between BRS and productivity or sick leave suggests that such a relationship exists. The present case studies also demonstrated an association between the BRS and the direct productivity. Based on the data from the call center, a reduction of 10%-units in the prevalence of general symptoms (such as fatigue, headache, nausea, etc.) corresponded with a gain of 1.5% in performance. Based on the findings in the insurance company, a reduction of 10%-units in the prevalence of irritation symptoms corresponded with a decrease of 0.7% in the short-term absenteeism. A review of 23 studies suggests that a linkage exists between typical BRS and productivity indicators such as task or work performance or absence from work. Quantitative associations between BRS and productivity were demonstrated in two office environments. Quantitative associations between BRS and economic metrics enable cost-benefits analysis.

Building Physics Test Cases | Buildings | NREL

Science.gov Websites

building physics test cases in BESTEST-EX. In these cases, the model inputs that describe the house are programs. This diagram provides an overview of the BESTEST-EX physics case process. On the left side of the diagram is a box labeled "BESTEST-EX Document" with a list that contains two bulleted items. The

Reorienting health services with capacity building: a case study of the Core Skills in Health Promotion Project.

PubMed

Yeatman, H R; Nove, T

2002-12-01

This paper presents a case study of the application of a framework for capacity building [Hawe, P., King, L., Noort, M., Jordens, C. and Lloyd, B. (2000) Indicators to Help with Capacity Building in Health Promotion. NSW Health, Sydney] to describe actions aimed at building organizational support for health promotion within an area health service in New South Wales, Australia. The Core Skills in Health Promotion Project (CSHPP) arose from an investigation which reported that participants of a health promotion training course had increased health promotion skills but that they lacked the support to apply their skills in the workplace. The project was action-research based. It investigated and facilitated the implementation of a range of initiatives to support community health staff to apply a more preventive approach in their practice and it contributed to the establishment of new organizational structures for health promotion. An evaluation was undertaken 4 years after the CSHPP was established, and 2 years after it had submitted its final report. Interviews with senior managers, document analysis of written reports, and focus groups with middle managers and service delivery staff were undertaken. Change was achieved in the three dimensions of health infrastructure, program maintenance and problem solving capacity of the organization. It was identified that the critically important elements in achieving the aims of the project-partnership, leadership and commitment-were also key elements of the capacity building framework. This case study provides a practical example of the usefulness of the capacity building framework in orienting health services to be supportive of health promotion.

Automatic computation for optimum height planning of apartment buildings to improve solar access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong, Yoon-Bok; Kim, Yong-Yee; Seok, Ho-Tae

2011-01-15

The objective of this study is to suggest a mathematical model and an optimal algorithm for determining the height of apartment buildings to satisfy the solar rights of survey buildings or survey housing units. The objective is also to develop an automatic computation model for the optimum height of apartment buildings and then to clarify the performance and expected effects. To accomplish the objective of this study, the following procedures were followed: (1) The necessity of the height planning of obstruction buildings to satisfy the solar rights of survey buildings or survey housing units is demonstrated by analyzing through amore » literature review the recent trend of disputes related to solar rights and to examining the social requirements in terms of solar rights. In addition, the necessity of the automatic computation system for height planning of apartment buildings is demonstrated and a suitable analysis method for this system is chosen by investigating the characteristics of analysis methods for solar rights assessment. (2) A case study on the process of height planning of apartment buildings will be briefly described and the problems occurring in this process will then be examined carefully. (3) To develop an automatic computation model for height planning of apartment buildings, geometrical elements forming apartment buildings are defined by analyzing the geometrical characteristics of apartment buildings. In addition, design factors and regulations required in height planning of apartment buildings are investigated. Based on this knowledge, the methodology and mathematical algorithm to adjust the height of apartment buildings by automatic computation are suggested and probable problems and the ways to resolve these problems are discussed. Finally, the methodology and algorithm for the optimization are suggested. (4) Based on the suggested methodology and mathematical algorithm, the automatic computation model for optimum height of apartment buildings is developed and the developed system is verified through the application of some cases. The effects of the suggested model are then demonstrated quantitatively and qualitatively. (author)« less

Building Language Educators: The Implications of Case-Based Pedagogy Using Practicum-Based Student-Teacher-Generated Cases for Pre-Service Language Teacher Education

ERIC Educational Resources Information Center

Cournoyer, Amy Beth

2014-01-01

This case study investigated case-based pedagogy using student-teacher-generated cases as an instructional tool in the preparation of 12 pre-service ESL, Bilingual, and Modern Foreign Language teachers enrolled in a Student Teaching Seminar at a post-secondary institution. In the fall methods course, each participant generated a case study based…

Wind interference effect on an octagonal plan shaped tall building due to square plan shaped tall buildings

NASA Astrophysics Data System (ADS)

Kar, Rony; Dalui, Sujit Kumar

2016-03-01

The variation of pressure at the faces of the octagonal plan shaped tall building due to interference of three square plan shaped tall building of same height is analysed by computational fluid dynamics module, namely ANSYS CFX for 0° wind incidence angle only. All the buildings are closely spaced (distance between two buildings varies from 0.4 h to 2 h, where h is the height of the building). Different cases depending upon the various positions of the square plan shaped buildings are analysed and compared with the octagonal plan shaped building in isolated condition. The comparison is presented in the form of interference factors (IF) and IF contours. Abnormal pressure distribution is observed in some cases. Shielding and channelling effect on the octagonal plan shaped building due to the presence of the interfering buildings are also noted. In the interfering condition the pressure distribution at the faces of the octagonal plan shaped building is not predictable. As the distance between the principal octagonal plan shaped building and the third square plan shaped interfering building increases the behaviour of faces becomes more systematic. The coefficient of pressure (C p) for each face of the octagonal plan shaped building in each interfering case can be easily found if we multiply the IF with the C p in the isolated case.

Complexity, Representation and Practice: Case Study as Method and Methodology

ERIC Educational Resources Information Center

Miles, Rebecca

2015-01-01

While case study is considered a common approach to examining specific and particular examples in research disciplines such as law, medicine and psychology, in the social sciences case study is often treated as a lesser, flawed or undemanding methodology which is less valid, reliable or theoretically rigorous than other methodologies. Building on…

Environmental comfort as criteria for energy management: a case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhee, E.K.

This study is a field experiment aimed at evaluating environmental comfort by investigating the impact of different environmental conditions on the perceptions, behaviors and performance of building occupants. The development of a prediction model for thermal comfort and the determination of actual energy savings achieved by altering environmental conditions are other major goals of this study. The research approach is a case study applying a pretest-posttest experimental design. An office building in Ann Arbor is selected for the study. It represents a typical office building in terms of design, occupancy, building systems and environmental conditions, suggesting that the study resultsmore » may be applicable to other office settings. It was found that building occupants were satisfied with the pretest environmental conditions which were within the range of current comfort standards, and with the posttest conditions which were lower than current standards. Changes in environmental conditions had little effect on the occupants' perceptions, behavior and performance, although the changes achieved considerable energy savings during the heating season. Among the other major findings, it was demonstrated that psychological factors were more decisive than objective environmental conditions in determining thermal comfort. The study concludes that an energy management program in an office building that is based on 69/sup 0/F indoor temperature, 30% relative humidity, 10-15 cfm/person ventilation rate, 50 fc lighting level, and 105 F domestic hot water can save energy while maintaining environmental comfort among occupants.« less

QUIC Transport and Dispersion Modeling of Vehicle Emissions in Cities for Better Public Health Assessments.

PubMed

Brown, Michael J; Williams, Michael D; Nelson, Matthew A; Werley, Kenneth A

2015-01-01

The Quick Urban and Industrial Complex (QUIC) plume modeling system is used to explore how the transport and dispersion of vehicle emissions in cities are impacted by the presence of buildings. Using downtown Philadelphia as a test case, notional vehicle emissions of gases and particles are specified as line source releases on a subset of the east-west and north-south streets. Cases were run in flat terrain and with 3D buildings present in order to show the differences in the model-computed outdoor concentration fields with and without buildings present. The QUIC calculations show that buildings result in regions with much higher concentrations and other areas with much lower concentrations when compared to the flat-earth case. On the roads with vehicle emissions, street-level concentrations were up to a factor of 10 higher when buildings were on either side of the street as compared to the flat-earth case due to trapping of pollutants between buildings. However, on roads without vehicle emissions and in other open areas, the concentrations were up to a factor of 100 times smaller as compared to the flat earth case because of vertical mixing of the vehicle emissions to building height in the cavity circulation that develops on the downwind side of unsheltered buildings. QUIC was also used to calculate infiltration of the contaminant into the buildings. Indoor concentration levels were found to be much lower than outdoor concentrations because of deposition onto indoor surfaces and particulate capture for buildings with filtration systems. Large differences in indoor concentrations from building to building resulted from differences in leakiness, air handling unit volume exchange rates, and filter type and for naturally ventilated buildings, whether or not the building was sheltered from the prevailing wind by a building immediately upwind.

Energy-efficient building design in cold climates: Schools as a case study

NASA Astrophysics Data System (ADS)

Rangel Ruiz, Rocio

Buildings account for great amounts of greenhouse gas emissions. In terms of energy, buildings account for one third of the total amount of energy used in the country every year! Schools account for 14 percent of the energy used annually in commercial and institutional buildings. Further, schools are one of the most commonly constructed building types in Canada and spaces such as classrooms are often duplicated. This makes them preferred candidates for the research that was undertaken where energy-efficient solutions that can be transferred to different school designs were derived. Throughout the study, the Commercial Building Incentive Program (CBIP) was used as a benchmark. The objectives of the study were to demonstrate energy-efficient concepts, provide a case study to evaluate solutions, develop typological models and provide an understanding of the innovation process. The technological and societal aspects of the energy-efficient design were addressed. With respect to the technological aspects, the first step was the analysis of conventional design using a school in Calgary as a case study. The optimization of conventional design was undertaken using computer modeling to identify best practice solutions. Aspects that were included in the studies were lighting design, envelope characteristics, HVAC systems and building plant systems. The inclusion of passive design included the analysis of daylighting and natural ventilation. Computer modeling was used to assess daylighting in classrooms with unilateral and bilateral daylighting. Illuminance levels, glare and light distribution were evaluated. The study of natural ventilation was undertaken using literature review. Airflow and outdoor temperatures were the focus to identify solutions that could be incorporated into the design of classrooms. It was concluded that achieving excellence in energy efficiency in schools could be achieved using readily available technologies. Energy savings of up to 63 percent better than Canada's Model National Energy Code for Buildings (MNECB) reference case and utility cost savings of 30,000 (on a 50,000 annual cost) were achieved through conventional design optimization. Additional energy savings of three percent and utility cost savings of $7,000 were seen when passive strategies were included in the design. With respect to the societal aspects, an exploratory research study was undertaken to examine innovation. Architects and energy consultants were interviewed. All design professionals included in the study had participated in projects approved for a grant under CBIP. The purpose of the study was to identify drivers and barriers to energy efficiency. The study demonstrated that external and internal innovation pressures have a significant effect on whether or not the technology is adopted. Suggestions for reducing barriers and further promoting energy efficiency are discussed in this thesis. It is expected that the research will not only aid designers in assessing projects with regard to local priorities, but will also provide building guidelines that serve as tools for the development of the Canadian energy compliance for CO2 emissions.

Building the Business Case

DTIC Science & Technology

2001-05-15

Building the Business Case Dr Robin Miller Centre for Defence Analysis Report Documentation Page Report Date 15052001 Report Type N/A Dates Covered...from... to) - Title and Subtitle Building the Business Case Contract Number Grant Number Program Element Number Author(s) Miller, Robin...Trade-offs between men/materiel/process can be made coherent – auditable links to operational risk can be maintained Business Case Challenge for SBA

Technology Solutions Case Study: Cladding Attachment Over Mineral Fiber Insulation Board

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-03-01

Exterior insulating sheathing for high performance building enclosures is an important strategy for meeting energy efficiency requirements in many climates and can position an existing building to perform at the level of best-in-class new construction. Insulation board is also important in high performance building retrofit situations where minimal disruption at the interior is typically desired.

Shaw High School A Case Study in Rural High School Improvement

ERIC Educational Resources Information Center

Williams, Doris Terry

2004-01-01

Shaw High School is one of two schools making up the Shaw School District. The school is located in an old and once majestic building whose large concrete pillars still stand at the entrance. A small white house across the street holds the district administrative office. Several buildings, detached from the main building, house the cafeteria,…

Building the Capacity of Indonesian Education Universities for ICT in Pre-Service Teacher Education: A Case Study of a Strategic Planning Exercise

ERIC Educational Resources Information Center

Lim, Cher Ping; Pannen, Paulina

2012-01-01

This paper documents how four Indonesian teacher education institutions (TEIs) engaged in strategic planning to build their capacity in developing pre-service teachers' ICT in education competencies. These TEIs adopted a holistic approach towards strategic planning by drawing upon the six dimensions of the "Capacity Building Toolkit" for…

Buildings Lean Maintenance Implementation Model

NASA Astrophysics Data System (ADS)

Abreu, Antonio; Calado, João; Requeijo, José

2016-11-01

Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

Munitions Constituents (MC) and the Military Munitions Response Program (MMRP)

DTIC Science & Technology

2011-03-29

BUILDING STRONG® f i nv ronmen a on or ng a a ua y or s op 29 March 2011 MIDAS Munition Items Disposition Action System BUILDING STRONG® https...Corps of Engineers BUILDING STRONG® f i nv ronmen a on or ng a a ua y or s op 29 March 2011 Primary Explosives BUILDING STRONG®2 What are Primary...ronmen a on or ng a a ua y or s op 29 March 2011 Source of Metals from Munitions  Cartridge Case  Projectile Case  Bomb Case BUILDING STRONG

Community Building as an Instructional Goal in Japanese Adult Basic Education

ERIC Educational Resources Information Center

Jacobson, Erik

2009-01-01

This paper presents the results of a multisite case study of adult basic education in Japan. A key finding of the study is that as part of community building within classrooms, students, teachers, and administrators prioritize human relations and expressions of empathy rather than academic skill development. In contrast to Japanese educational…

Value of Coaching in Building Leadership Capacity of Principals in Urban Schools

ERIC Educational Resources Information Center

Farver, Anita R.; Holt, Carleton R.

2015-01-01

The purpose of this qualitative case study was to understand how coaching support structures enabled and sustained leadership practices of urban principals. The study investigated how the intervention of coaching for academic leaders can serve as evidence-based professional development for building leadership capacity. The central focus was on…

The Building of Pre-Service Primary Teachers' Knowledge of Mathematics Teaching: Interaction and Online Video Case Studies

ERIC Educational Resources Information Center

Llinares, Salvador; Valls, Julia

2009-01-01

This study explores how preservice primary teachers became engaged in meaning-making mathematics teaching when participating in online discussions within learning environments integrating video-clips of mathematics teaching. We identified different modes of participation in the online discussions and different levels of knowledge-building. The…

Developing a regional ITS architecture : a cross-cutting study : building a framework for regional ITS integration

DOT National Transportation Integrated Search

1999-09-01

This report highlights cross-cutting findings and perspectives gleaned from a series of case studies that examined the development processes of regional and statewide Intelligent Transportation Systems (ITS) architectures. Each of the case studies is...

India Commercial Buildings Data Framework: A Summary of Potential Use Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mathew, Paul; Mathew, Sangeeta; Kumar, Satish

This report details a potential set of use cases for India’s Commercial Buildings Data Framework. The use cases are aimed at enabling data-driven, evidence-based policy making and at transforming the market for energy efficiency in the building sector by facilitating the adoption of (1) superior energy-efficient building design and operation and maintenance practices, and (2) better specification and procurement of end-use equipment and systems.

Homeland Security Collaboration: Catch Phrase or Preeminent Organizational Construct?

DTIC Science & Technology

2009-09-01

collaborative effort? C. RESEARCH METHODOLOGY This research project utilized a modified case study methodology. The traditional case study method ...discussing the research method , offering smart practices and culminate with findings and recommendations. Chapter II Homeland Security Collaboration...41 Centers for Regional Excellence, “Building Models.” 16 Chapter III Research Methodology:  Modified Case Study Method is

The Case Study Technologies as the Means of Competency Building Approach Realization in Higher Education of Russia

ERIC Educational Resources Information Center

Abdrafikova, Albina R.; Konopatskaya, Ekaterina A.

2014-01-01

The problem of increasing education efficiency in Russian high school under the condition of well-organized educational process with using "Case-study" technology is considered in the article. The article is devoted to the methodology of case study, and especially its implementation in Kazan Federal University, the Institute of Philology…

Establishing a Commercial Buildings Energy Data Framework for India: A Comprehensive Look at Data Collection Approaches, Use Cases and Institutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iyer, Maithili; Kumar, Satish; Mathew, Sangeeta

Enhancing energy efficiency of the commercial building stock is an important aspect of any national energy policy. Understanding how buildings use energy is critical to formulating any new policy that may impact energy use, underscoring the importance of credible data. Data enables informed decision making and good quality data is essential for policy makers to prioritize energy saving strategies and track implementation. Given the uniqueness of the buildings sector and challenges to collecting relevant energy data, this study characterizes various elements involved in pertinent data collection and management, with the specific focus on well-defined data requirements, appropriate methodologies and processes,more » feasible data collection mechanisms, and approaches to institutionalizing the collection process. This report starts with a comprehensive review of available examples of energy data collection frameworks for buildings across different countries. The review covers the U.S. experience in the commercial buildings sector, the European experience in the buildings sector and other data collection initiatives in Singapore and China to capture the more systematic efforts in Asia in the commercial sector. To provide context, the review includes a summary and status of disparate efforts in India to collect and use commercial building energy data. Using this review as a key input, the study developed a data collection framework for India with specific consideration to relevant use cases. Continuing with the framework for data collection, this study outlines the key performance indicators applicable to the use cases and their collection feasibility, as well as immediate priorities of the participating stakeholders. It also discusses potential considerations for data collection and the possible approaches for survey design. With the specific purpose of laying out the possible ways to structure and organize data collection institutionally, the study collates existing mechanisms to analyze building energy performance in India and opportunities for standardizing data collection. This report describes the existing capacities and resources for establishing an institutional framework for data collection, the legislation and mandates that support such activity, and identifies roles and responsibilities of the relevant ministries and organizations. Finally, the study presents conclusions and identifies two major data collection strategies within the existing legal framework.« less

The effect of building façade on natural lighting (Case study: Building of phinisi tower UNM)

NASA Astrophysics Data System (ADS)

Jamala, Nurul

2017-04-01

Utilization of natural lighting is one factor to lower the energy consumption of a building. Model building facade effect on natural light sources that can be absorbed into the building. UNM Phinisi Tower Building is a metaphor for the display of boats phinisi using Hiperbolic paraboloid facade which is futuristic sophistication of the application of science and technology, so that this object that is the focus of research on the effects on the building facade natural lighting. A quantitative research methods using Autodesk Echotech program to determine the value of the building into the natural lighting illuminance, either by using the facade and do not. The aim of research is to determine the percentage utilization of natural light into the building using a building facade. The study concluded the decline percentage in the value of the illuminance after the building using the building facade is 49% -74% and a mean value of 60.3%, so it can be concluded that the building facade effects on the natural lighting.

Indoor Air Quality and Thermal Comfort in School Buildings

NASA Astrophysics Data System (ADS)

Juhásová Šenitková, Ingrid

2017-12-01

This paper presents results to thermal comfort and environment quality questions in 21 school building rooms. Results show that about 80% of the occupants expressed satisfaction with their thermal comfort in only 11% of the buildings surveyed. Air quality scores were somewhat higher, with 26% of buildings having 80% or occupant satisfaction. With respect to thermal comfort and air quality performance goals set out by standards, most buildings appear to be falling far short. Occupant surveys offer a means to systematically measure this performance, and also to provide diagnostic information for building designers and operators. The odours from building materials as well as human odours were studied by field measurement. The odour intensity and indoor air acceptability were assessed by a sensory panel. The concentrations of total volatile organic compounds and carbon dioxide were measured. The odours from occupancy and building materials were studied under different air change rate. The case study of indoor air acceptability concerning to indoor odours and its effect on perceived air quality are also presented in this paper.

Does Sense of Community Matter? An Examination of Participants' Perceptions of Building Learning Communities in Online Courses

ERIC Educational Resources Information Center

Liu, Xiaojing; Magjuka, Richard J.; Bonk, Curtis J.; Lee, Seung-hee

2007-01-01

Using a case study approach, this study explored the participants' perceptions of building learning communities in online courses in an online MBA program. The findings suggested that students felt a sense of belonging to a learning community when they took online courses in this program. The study found positive relationships between sense of…

Institutional Motivations and Barriers to the Construction of Green Buildings on Campus: A Case Study of the University of Waterloo, Ontario

ERIC Educational Resources Information Center

Richardson, Gregory R. A.; Lynes, Jennifer K.

2007-01-01

Purpose: To explore the barriers and motivations to the construction of green buildings at the University of Waterloo (UW) by documenting and analysing the UW building process. Design/methodology/approach: The authors conducted 13 semi-structured in-depth interviews with key UW individuals as well as analyzing numerous internal reports in order to…

Estimating foundation water vapor release using a simple moisture balance and AIM-2 : case study of a contemporary wood-frame house

Treesearch

C. R. Boardman; Samuel V. Glass; Charles G. Carll

2010-01-01

Proper management of indoor humidity in buildings is an essential aspect of durability. Following dissipation of moisture from construction materials, humidity levels during normal operation are generally assumed to primarily depend on the building volume, the number of building occupants and their behavior, the air exchange rate, and the water vapor content of outdoor...

Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design teams over other strategies because of their lower first costs and operating costs. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings constructed eight steps, which outline the design and commissioning required for these passive vents to perform as intended.

Aspergillosis in immunocompromised paediatric patients: associations with building hygiene, design, and indoor air.

PubMed Central

Anderson, K.; Morris, G.; Kennedy, H.; Croall, J.; Michie, J.; Richardson, M. D.; Gibson, B.

1996-01-01

BACKGROUND: Nosocomial aspergillosis is a well known complication of immunosuppression in cancer patients and those undergoing transplantation and has usually been associated with major building construction or demolition. An observational study is reported of the hospital environment associated with an outbreak of aspergillosis in a paediatric oncology ward. METHODS: All cases of aspergillosis were identified from the hospital records and categorised as definite or probable according to the extent of supportive clinical and laboratory findings. All relevant aspects of building ventilation, air filtration, and aerosol generation considered relevant were examined and air samples for fungi were taken in triplicate at 25 sites using a slit sampler with appropriate culture media. RESULTS: Six cases of aspergillosis were identified over one year out of the 148 patients who attended the unit - the only part of the hospital where cases were found. Examination of the building services and function suggested that the cause or source was isolated to this paediatric oncology/haematology ward and may have been attributed to a defective disposal conduit door as well as the dispersal of a contaminated aerosol from the ward vacuum cleaner which had the highest measured concentrations of Aspergillus fumigatus in or around the building (65 colony forming units (cfu)/m3 compared with 0-6 cfu/m3 elsewhere). No further cases were identified in the two years after these hygiene arrangements were changed. CONCLUSIONS: The investigation of this outbreak of nosocomial aspergillosis identified several possible sources of fungally contaminated aerosol which could have been implicated as the cause. Their modification was followed by a reduction in the incidence of further cases. Each should be incorporated as an issue of importance in hospital building design and hygiene. PMID:8779127

Enhancement of global flood damage assessments using building material based vulnerability curves

NASA Astrophysics Data System (ADS)

Englhardt, Johanna; de Ruiter, Marleen; de Moel, Hans; Aerts, Jeroen

2017-04-01

This study discusses the development of an enhanced approach for flood damage and risk assessments using vulnerability curves that are based on building material information. The approach draws upon common practices in earthquake vulnerability assessments, and is an alternative for land-use or building occupancy approach in flood risk assessment models. The approach is of particular importance for studies where there is a large variation in building material, such as large scale studies or studies in developing countries. A case study of Ethiopia is used to demonstrate the impact of the different methodological approaches on direct damage assessments due to flooding. Generally, flood damage assessments use damage curves for different land-use or occupancy types (i.e. urban or residential and commercial classes). However, these categories do not necessarily relate directly to vulnerability of damage by flood waters. For this, the construction type and building material may be more important, as is used in earthquake risk assessments. For this study, we use building material classification data of the PAGER1 project to define new building material based vulnerability classes for flood damage. This approach will be compared to the widely applied land-use based vulnerability curves such as used by De Moel et al. (2011). The case of Ethiopia demonstrates and compares the feasibility of this novel flood vulnerability method on a country level which holds the potential to be scaled up to a global level. The study shows that flood vulnerability based on building material also allows for better differentiation between flood damage in urban and rural settings, opening doors to better link to poverty studies when such exposure data is available. Furthermore, this new approach paves the road to the enhancement of multi-risk assessments as the method enables the comparison of vulnerability across different natural hazard types that also use material-based vulnerability curves. Finally, this approach allows for more accuracy in estimating losses as a result of direct damages. 1 http://earthquake.usgs.gov/data/pager/

Urban simulation evaluation with study case of the Singapore Management University, Singapore

NASA Astrophysics Data System (ADS)

Seanders, O.

2018-01-01

This paper reports and discusses about the urban simulation evaluation with a study case, The Singapore Managemant University (SMU), the first major university to be located in the city centre. It is located in Bras Basah District, with some controversy on the geographical establishment, the physical realization of the University in the original plan required some demolishes, urban historical building, a public park and in the end will impact the lose of some certain qualities of the urban space. From this case we can see that the urban design and cultural heritage principles could come into conflicts with the more practical concerns of space constraints and transportation efficiency. This SMU case reflect the problem of the developing countries that have to decide between conservation of buildings and green spaces and space demands. In this case, for Singapore, it marks a progress in the step of greater community involvement in the planning process.

Technology Solutions Case Study: Field Performance of Inverter-Driven Heat Pumps in Cold Climates

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Williamson and R. Aldrich

2015-09-01

To better understand and characterize heating performance, the U.S. Department of Energy Building America team, Consortium for Advanced Residential Buildings (CARB), monitored seven inverter-driven ASHPs across the northeast United States during the winter of 2013–2014.

The Use of Mindfulness to Enhance a Special Educator's Self-Efficacy: A Qualitative Case Study

ERIC Educational Resources Information Center

Kynaston, Kristina

2017-01-01

The problem addressed in this study was that few special educators have strategies to cope with the stressors of teaching, building self-efficacy, and managing classroom behavior. Special educators who work with students who have disabilities have unique needs when it comes to behavior management, building classroom community, and increasing…

A Middle School's Response-to-Intervention Journey: Building Systematic Processes of Facilitation, Collaboration, and Implementation

ERIC Educational Resources Information Center

Dulaney, Shannon K.

2013-01-01

This article discusses a qualitative case study examining one middle school's response to intervention (RtI) efforts. Study participants included the principal, assistant principal, and members of the school's leadership team. A description of the RtI consensus and infrastructure-building processes, consideration of the RtI facilitators, and a…

Capacity Building as a Tool for Assessing Training and Development Activity: An Indian Case Study

ERIC Educational Resources Information Center

Krishnaveni, R.; Sripirabaa, B.

2008-01-01

In recognition of its increasing importance, many organizations make periodic assessments of their training and development activity. The objective of the present study was to extend the concept of capacity building to the assessment of training and development activity in an automobile component manufacturing organization, using a developed and…

A case-control study of injuries arising from the earthquake in Armenia, 1988.

PubMed Central

Armenian, H. K.; Noji, E. K.; Oganesian, A. P.

1992-01-01

The study attempts to identify predictors of injuries among persons who were hospitalized following the Armenian earthquake of 7 December 1988. A total of 189 such individuals were identified through neighbourhood polyclinics in the city of Leninakan and 159 noninjured controls were selected from the same neighbourhoods. A standardized interview questionnaire was used. Cases and controls shared many social and demographic characteristics; however, 98% of persons who were hospitalized with injuries were inside a building at the time of the earthquake, compared with 83% of the controls (odds ratio = 12.20, 95% confidence interval (CI) = 3.62-63.79). The odds ratio of injuries for individuals who were in a building that had five or more floors, compared with those in lower buildings, was 3.65 (95% CI = 2.12-6.33). Leaving buildings after the first shock of the earthquake was a protective behaviour. The odds ratio for those staying indoors compared with those who ran out was 4.40 (95% CI = 2.24-8.71). PMID:1600585

New Whole-House Solutions Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes - Pacific Northwest

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-05-01

This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). In this project, the Northwest Energy Efficient Manufactured Housing Program worked with Building America Partnership for Improved Residential Construction and Bonneville Power Administration to help four factory homebuilders build prototype zero energy ready manufactured homes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). Previous phases of this project created a HPMH specification and prototyped individual measuresmore » from the package to obtain engineering approvals and develop preliminary factory construction processes. This case study describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability. Monitoring is expected to continue into 2016.« less

Building capacity for implementation of the framework convention for tobacco control in Vietnam: lessons for developing countries

PubMed Central

Stillman, Frances A.; David, Annette M.; Kibria, Naseeb; Phan, Hai Thi

2014-01-01

Effective implementation of the WHO international Framework Convention on Tobacco Control (FCTC) is the key to controlling the tobacco epidemic. Within countries, strong national tobacco control capacity is the primary determinant for successful implementation of the FCTC. This case study of tobacco control policy describes the experience of building national tobacco control capacity in Vietnam under the Reduce Smoking in Vietnam Partnership project within a national capacity-building framework. In the Vietnam experience, four components of tobacco control capacity emerged as especially important to achieve ‘quality’ outputs and measurable outcomes at the implementation level: (i) organizational structure/infrastructure; (ii) leadership and expertise; (iii) partnerships and networks and (iv) data and evidence from research. The experience gained in this project helps in adapting our tobacco control capacity-building model, and the lessons that emerged from this country case study can provide guidance to global funders, tobacco control technical assistance providers and nations as governments endeavor to meet their commitment to the FCTC. PMID:23411160

Building America Case Study: Duct in Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-09-01

Forced air distribution systems (duct systems) typically are installed out of sight for aesthetic reasons, most often in unconditioned areas such as an attic or crawlspace. Any leakage of air to or from the duct system (duct leakage) in unconditioned space not only loses energy, but impacts home and equipment durability and indoor air quality. An obvious solution to this problem is to bring the duct system into the interior of the house, either by sealing the area where the ducts are installed (sealed attic or crawlspace) or by building an interior cavity or chase above the ceiling plane (raisedmore » ceiling or fur-up chase) or below the ceiling plane (dropped ceiling or fur-down) for the duct system. This case study examines one Building America builder partner's implementation of an inexpensive, quick and effective method of building a fur-down or dropped ceiling chase.« less

QUIC Transport and Dispersion Modeling of Vehicle Emissions in Cities for Better Public Health Assessments

PubMed Central

Brown, Michael J.; Williams, Michael D.; Nelson, Matthew A.; Werley, Kenneth A.

2015-01-01

The Quick Urban and Industrial Complex (QUIC) plume modeling system is used to explore how the transport and dispersion of vehicle emissions in cities are impacted by the presence of buildings. Using downtown Philadelphia as a test case, notional vehicle emissions of gases and particles are specified as line source releases on a subset of the east–west and north–south streets. Cases were run in flat terrain and with 3D buildings present in order to show the differences in the model-computed outdoor concentration fields with and without buildings present. The QUIC calculations show that buildings result in regions with much higher concentrations and other areas with much lower concentrations when compared to the flat-earth case. On the roads with vehicle emissions, street-level concentrations were up to a factor of 10 higher when buildings were on either side of the street as compared to the flat-earth case due to trapping of pollutants between buildings. However, on roads without vehicle emissions and in other open areas, the concentrations were up to a factor of 100 times smaller as compared to the flat earth case because of vertical mixing of the vehicle emissions to building height in the cavity circulation that develops on the downwind side of unsheltered buildings. QUIC was also used to calculate infiltration of the contaminant into the buildings. Indoor concentration levels were found to be much lower than outdoor concentrations because of deposition onto indoor surfaces and particulate capture for buildings with filtration systems. Large differences in indoor concentrations from building to building resulted from differences in leakiness, air handling unit volume exchange rates, and filter type and for naturally ventilated buildings, whether or not the building was sheltered from the prevailing wind by a building immediately upwind. PMID:27867300

Use of computational fluid dynamics in optimization of natural smoke ventilation from a historical shopping mall - Case study

NASA Astrophysics Data System (ADS)

Krajewski, Grzegorz; Wegrzyński, Wojciech

2018-01-01

In this paper, the Authors present results of a complex case study, in which a natural smoke ventilation system was introduced into a historical mall Koszyki Market Hall located in the centre of Warsaw. As historical authorities protected the building, the only solution possible was to use a natural system - known for deficient performance in façade applications. To maximise the performance of the smoke control system, a Computational Wind Engineering exercise was performed. The goal was to find the most difficult wind attack angles, and optimise the performance at these conditions. Once the wind influence was known, a transient analysis was performed that included the growth of the fire within the building, as well as a numerical evacuation study. The resulting system was immune to the wind effects, and provided safe evacuation to users of the building, even in difficult wind conditions.

Application of life-cycle assessment (LCA) methodology for valorization of building demolition materials and products

NASA Astrophysics Data System (ADS)

Sara, Balazs; Antonini, Ernesto; Tarantini, Mario

2001-02-01

The VAMP project (VAlorization of building demolition Materials and Products, LIFE 98/ENV/IT/33) aims to build an effective and innovative information system to support decision making in selective demolition activity and to manage the valorization (recovery-reuse-recycling) of waste flows produced by the construction and demolition (C&D) sector. The VAMP information system will be tested it in Italy in some case studies of selective demolition. In this paper the proposed demolition-valorization system will be compared to the traditional one in a life cycle perspective, applying LCA methodology to highlight the advantages of VAMP system from an eco-sustainability point of view. Within the system boundaries demolition processes, transport of demolition wastes and its recovery/treatment or disposal in landfill were included. Processes avoided due to reuse-recycling activities, such as extraction of natural resources and manufacture of building materials and components, were considered too. In this paper data collection procedure applied in inventory and impact assessment phases and a general overview about data availability for LCA studies in this sector are presented. Results of application of VAMP methodology to a case study are discussed and compared with a simulated traditional demolition of the same building. Environmental advantages of VAMP demolition-valorization system are demonstrated quantitatively emphasizing the special importance of reuse of building components with high demand of energy for manufacture.

How the Story Unfolds: Exploring Ways Faculty Develop Open-Ended and Closed-Ended Case Designs

ERIC Educational Resources Information Center

Nesbitt, Leslie M.; Cliff, William H.

2008-01-01

Open-ended or closed-ended case study design schemes offer different educational advantages. Anatomy and physiology faculty members who participated in a conference workshop were given an identical case about blood doping and asked to build either an open-ended study or a closed-ended study. The workshop participants created a rich array of case…

Historical development of administration architecture in Malaysia (15th-21st century)

NASA Astrophysics Data System (ADS)

Mohidin, H. H. B.; Ismail, A. S.

2014-02-01

The main purpose of this paper is to document the development of the state administration building in Malaysia before and after the independence era, in relation to the evolutionary period of Malaysia's political, social and economic history. Multiple case study approach [19] is applied by referring to six prominent case studies to represent state administrative buildings from various phases of Malaysian history beginning from 14th century to 21st century as exemplar. Since this paper formulates new ways to approach and describes state administrative building design and factors that influence them, it uses interpretivism paradigm and (semiotics) as methodological approach to study the relationship between the building design and contextual elements. This paper, therefore, offers new insights, which not only add to knowledge in this field by widening and strengthening the understanding of state administrative architecture in Malaysia, but also are valuable for range of associated fields including architectural semiotics and non verbal communication. This is because this paper reveals deep understandings of the built form and material environment operating as a sign in a cultural and social context.

Validation of Point Clouds Segmentation Algorithms Through Their Application to Several Case Studies for Indoor Building Modelling

NASA Astrophysics Data System (ADS)

Macher, H.; Landes, T.; Grussenmeyer, P.

2016-06-01

Laser scanners are widely used for the modelling of existing buildings and particularly in the creation process of as-built BIM (Building Information Modelling). However, the generation of as-built BIM from point clouds involves mainly manual steps and it is consequently time consuming and error-prone. Along the path to automation, a three steps segmentation approach has been developed. This approach is composed of two phases: a segmentation into sub-spaces namely floors and rooms and a plane segmentation combined with the identification of building elements. In order to assess and validate the developed approach, different case studies are considered. Indeed, it is essential to apply algorithms to several datasets and not to develop algorithms with a unique dataset which could influence the development with its particularities. Indoor point clouds of different types of buildings will be used as input for the developed algorithms, going from an individual house of almost one hundred square meters to larger buildings of several thousand square meters. Datasets provide various space configurations and present numerous different occluding objects as for example desks, computer equipments, home furnishings and even wine barrels. For each dataset, the results will be illustrated. The analysis of the results will provide an insight into the transferability of the developed approach for the indoor modelling of several types of buildings.

[Dynamic changes of urban architecture landscape based on Barista: a case study in Tiexi District of Shenyang City].

PubMed

Zhang, Pei-feng; Hu, Yuan-man; He, Hong-shi; Xiong, Zai-ping; Liu, Miao

2010-12-01

In this paper, three-dimensional building information was extracted from high resolution satellite image based on Barista software. Combined with ArcGIS software, the dynamic changes of the building landscape in Tiexi District of Shenyang City during urban renewal process were analyzed from the conversion contribution rate, building density, average building height, and built-up area rate. It was found that during this urban renewal process, four dominant landscape types (vacant lot, residential building, industrial building, and road) were the main parts of the landscape changes. The areas of vacant lot, residential building, commercial building, and road increased, while that of industrial building decreased. The building density decreased, while the average building height increased. There was an obvious regional variation in building landscape. The building density in industrial district was higher than that in residential district, while the average building height was in adverse. The further from the city center, the lower the building density and building average height.

Use Of Infrared Thermography For The Identification Of Design And Construction Faults In Buildings

NASA Astrophysics Data System (ADS)

Seeber, Stephen A.

1984-03-01

Many design and construction details can affect building energy consumption in unex-pected ways. Further, design and construction errors can increase building energy consumption, result in discomfort to building occupants and cause structural damage to the building. Infrared inspections can easily evaluate the energy efficiency of various aspects of a building's design and identify flaws that might otherwise be detected as a result of occupants' complaints or damage to the building's mechanical or structural systems. Infrared thermography can be used by the architect to evaluate his designs and by the contractor to control the quality of construction. This paper discusses a number of issues that can help determine the effectiveness of infrared building surveys. Following this, three case stud-ies will be presented to illustrate design flaws that were detected through infrared build-ing surveys.

Team Building.

ERIC Educational Resources Information Center

1996

This document contains four papers presented at a symposium moderated by Allen Church at the 1996 conference of the Academy of Human Resource Development. "Teambuilding Intervention Strategy Development: A Case Study of Two Midwestern Manufacturing Industries" (Paul E. Brauchle, David W. Wright) discusses a qualitative case study of employee…

Capacity Building in Response to Pandemic Influenza Threats: Lao PDR Case Study

PubMed Central

Phommasack, Bounlay; Moen, Ann; Vongphrachanh, Phengta; Tsuyuoka, Reiko; Cox, Nancy; Khamphaphongphanh, Bouaphanh; Phonekeo, Darouny; Kasai, Takeshi; Ketmayoon, Pakapak; Lewis, Hannah; Kounnavong, Bounheuang; Khanthamaly, Viengphone; Corwin, Andrew

2012-01-01

The Lao People's Democratic Republic (PDR) committed to pandemic detection and response preparations when faced with the threat of avian influenza. Since 2006, the National Center for Laboratory and Epidemiology of Lao PDR has developed credible laboratory, surveillance, and epidemiological (human) capacity and as a result was designated a World Health Organization National Influenza Center in 2010. The Lao PDR experience in building influenza capacities provides a case study of the considerable crossover effect of such investments to augment the capacity to combat emerging and re-emerging diseases other than influenza. PMID:23222137

Building leadership capacity through peer career coaching: a case study.

PubMed

Sabo, Kathy; Duff, Margaret; Purdy, Brendan

2008-01-01

Today's demanding healthcare environment requires resiliency, creativity and innovation in delivery of patient care and service. Hospitals must create a workplace where staff are supported to develop professionally as knowledge workers. In 2003, University Health Network (UHN) partnered with donnerwheeler, career planning and development consultants, to provide a program for its 2,700 registered nurses. One component of this project, a peer coaching program called Coach Mastery, is profiled in this case study, which describes how it was implemented and the successes, challenges and outcomes in building internal leadership capacity and supporting staff development through career planning and development.

When physics and biology meet: the nanoscale case.

PubMed

Bueno, Otávio

2011-06-01

As an illustration of the complexities involved in connecting physics and molecular biology at the nanoscale, in this paper I discuss two case studies from nanoscience. The first examines the use of a biological structure (DNA) to build nanostructures in a controlled way. The second discusses the attempt to build a single molecular wire, and then decide whether such a wire is indeed conducting. After presenting the central features of each case study, I examine the role played in them by microscopic imaging, the different styles of reasoning involved, and the various theoretical, methodological, and axiological differences. I conclude by arguing that, except for the probe microscopes that are used, there is very little in common between the two cases. At the nanoscale, physics and molecular biology seem to meet in a non-unified way. Copyright © 2010 Elsevier Ltd. All rights reserved.

A Study on the Sources of Resources and Capacity Building in Resource Mobilization: Case of Private Chartered Universities in Nakuru Town, Kenya

ERIC Educational Resources Information Center

Kipchumba, Simon Kibet; Zhimin, Liu; Chelagat, Robert

2013-01-01

The purpose of this study was to review and analyze the resources needs and sources of resources and level of training and capacity building in resource mobilization in Kenyan private chartered universities. The study employed a descriptive survey research design. Purposeful sampling technique was used to select 63 respondents (staff) from three…

Higher Education Pushes for Energy Education: GVSU Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-03-01

Grand Valley State University (GVSU) partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP).

Quantifying the benefits of a building retrofit using an integrated system approach: A case study

DOE PAGES

Regnier, Cynthia; Sun, Kaiyu; Hong, Tianzhen; ...

2017-11-11

Building retrofits provide a large opportunity to significantly reduce energy consumption in the buildings sector. Traditional building retrofits focus on equipment upgrades, often at the end of equipment life or failure, and result in replacement with marginally improved similar technology and limited energy savings. The Integrated System (IS) retrofit approach enables much greater energy savings by leveraging interactive effects between end use systems, enabling downsized or lower energy technologies. This work presents a case study in Hawaii quantifying the benefits of an IS retrofit approach compared to two traditional retrofit approaches: a Standard Practice of upgrading equipment to meet minimummore » code requirements, and an Improved Practice of upgrading equipment to a higher efficiency. The IS approach showed an energy savings of 84% over existing building energy use, much higher than the traditional approaches of 13% and 33%. The IS retrofit also demonstrated the greatest energy cost savings potential. While the degree of savings realized from the IS approach will vary by building and climate, these findings indicate that savings on the order of 50% and greater are not possible without an IS approach. It is therefore recommended that the IS approach be universally adopted to achieve deep energy savings.« less

Quantifying the benefits of a building retrofit using an integrated system approach: A case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cynthia; Sun, Kaiyu; Hong, Tianzhen

Building retrofits provide a large opportunity to significantly reduce energy consumption in the buildings sector. Traditional building retrofits focus on equipment upgrades, often at the end of equipment life or failure, and result in replacement with marginally improved similar technology and limited energy savings. The Integrated System (IS) retrofit approach enables much greater energy savings by leveraging interactive effects between end use systems, enabling downsized or lower energy technologies. This work presents a case study in Hawaii quantifying the benefits of an IS retrofit approach compared to two traditional retrofit approaches: a Standard Practice of upgrading equipment to meet minimummore » code requirements, and an Improved Practice of upgrading equipment to a higher efficiency. The IS approach showed an energy savings of 84% over existing building energy use, much higher than the traditional approaches of 13% and 33%. The IS retrofit also demonstrated the greatest energy cost savings potential. While the degree of savings realized from the IS approach will vary by building and climate, these findings indicate that savings on the order of 50% and greater are not possible without an IS approach. It is therefore recommended that the IS approach be universally adopted to achieve deep energy savings.« less

Successful Strategies: Building a School-to-Careers System.

ERIC Educational Resources Information Center

Thiers, Naomi, Ed.

The following papers are included: "Building a Broad-Based Partnership" (Randy Wallace); "Creating a Partnership Agreement" (M. Amos Clifford, Robyn Flores); "Forming True Partnerships with Employers" (Lee W. Sloan); "Choosing a Model for Your School-to-Careers System" (Patty Williamson); "Case Study: Career Academy Model" (Shirley Earlise…

Energy Metrics for State Government Buildings

NASA Astrophysics Data System (ADS)

Michael, Trevor

Measuring true progress towards energy conservation goals requires the accurate reporting and accounting of energy consumption. An accurate energy metrics framework is also a critical element for verifiable Greenhouse Gas Inventories. Energy conservation in government can reduce expenditures on energy costs leaving more funds available for public services. In addition to monetary savings, conserving energy can help to promote energy security, air quality, and a reduction of carbon footprint. With energy consumption/GHG inventories recently produced at the Federal level, state and local governments are beginning to also produce their own energy metrics systems. In recent years, many states have passed laws and executive orders which require their agencies to reduce energy consumption. In June 2008, SC state government established a law to achieve a 20% energy usage reduction in state buildings by 2020. This study examines case studies from other states who have established similar goals to uncover the methods used to establish an energy metrics system. Direct energy consumption in state government primarily comes from buildings and mobile sources. This study will focus exclusively on measuring energy consumption in state buildings. The case studies reveal that many states including SC are having issues gathering the data needed to accurately measure energy consumption across all state buildings. Common problems found include a lack of enforcement and incentives that encourage state agencies to participate in any reporting system. The case studies are aimed at finding the leverage used to gather the needed data. The various approaches at coercing participation will hopefully reveal methods that SC can use to establish the accurate metrics system needed to measure progress towards its 20% by 2020 energy reduction goal. Among the strongest incentives found in the case studies is the potential for monetary savings through energy efficiency. Framing energy conservation as budget enhancement is found to be a particularly useful approach in political environments that are not always receptive to climate change oriented efforts. For example, the NC Utility Savings Initiative claims to have saved over $400 million in avoided tax costs. The case studies reveal a wide range of individual successes as a result of energy conservation efforts. Despite the successes found, results indicate that most states have not obtained or completely measured progress towards their energy reduction goals.

Industrial wastes from the boat-building sector in the Marche Region (Italy): a parametric and chemical-physical characterization.

PubMed

Carchesio, M; Tatàno, F; Tosi, G; Trivellone, C H

2013-01-01

Using the renowned leisure boat-building sector in the Marche Region (Italy) as a case-study, this paper addresses the characterization of (1) the industrial waste generation from the building of composite material-based boats and (2) some chemical-physical properties of representative types of boat-building residues (plastic foam, hardened resin, fibre-reinforced composite residues, and sanding dust). A parametric evaluation based on the number of employees gave a representative unit generation rate per employee (UGRpE) of 1.47 tons(waste) employee(-1) year(-1) for the entire Marche regional boatbuilding district, whereas evaluations carried out separately for three case-study companies provided values of 1.56, 3.07, and 1.12 tons(waste) employee(-1) year(-1) as representative for a mass-produced motor boat builder (case-study company '1'), a customized sailing boat builder (case-study company '2'), and a mould and structural component builder (case-study company '3'), respectively. The original proposal and evaluation of two additional generation rates based on physical characteristics intrinsic to the manufactured product, i.e. the unit generation rate per boat area (UGRpA) and per boat weight (UGRpW), confirmed the higher waste generation for the sailing boat builder(representative UGRpA and UGRpW values of 0.35 tons(waste) m(-2)(boat) year(-1) and 2. 71 tons(waste) tons(-1)(boat) year(-1), respectively) compared with the motor boat builder (representative UGRpA and UGRpW values of 0.06 tons(waste) m(-2)(boat) year(-1) and 0.49 tons(waste) tons(-1)(boat) year(-1), respectively). The chemical-physical property characterization of the selected residues revealed the following aspects: a general condition of low moisture contents; significant ash contents in the glass- and carbon-fibre composite residues and the correlated sanding dust; and relatively high energy content values in the overall range 14,144-32,479 kJ kg(-1), expressed as the lower heating value.

Beyond access: a case study on the intersection between accessibility, sustainability, and universal design.

PubMed

Gossett, Andrea; Mirza, Mansha; Barnds, Ann Kathleen; Feidt, Daisy

2009-11-01

A growing emphasis has been placed on providing equal opportunities for all people, particularly people with disabilities, to support participation. Barriers to participation are represented in part by physical space restrictions. This article explores the decision-making process during the construction of a new office building housing a disability-rights organization. The building project featured in this study was developed on the principles of universal design, maximal accessibility, and sustainability to support access and participation. A qualitative case study approach was used involving collection of data through in-depth interviews with key decision-makers; non-participant observations at design meetings; and on-site tours. Qualitative thematic analysis along with the development of a classification system was used to understand specific building elements and the relevant decision processes from which they resulted. Recording and analyzing the design process revealed several key issues including grassroots involvement of stakeholders; interaction between universal design and sustainable design; addressing diversity through flexibility and universality; and segregationist accessibility versus universal design. This case study revealed complex interactions between accessibility, universal design, and sustainability. Two visual models were proposed to understand and analyze these complexities.

The Human Drones of Isis: How 21st Century Terrorism Uses Remote Warfare

DTIC Science & Technology

2017-06-01

aftermath of 9/11 is Lorenzo Vidino’s Al Qaeda in Europe. Focusing on Al Qaeda (AQ) attacks in Europe, Vidino uses case studies of the major...the main focuses of our theory-building case study . 62 “The European Union’s Policies on Counter...it will consider case studies , and conduct cross- case comparisons in order to identify gaps in existing remote warfare theory. It will further

Regionalized LCA-based optimization of building energy supply: method and case study for a Swiss municipality.

PubMed

Saner, Dominik; Vadenbo, Carl; Steubing, Bernhard; Hellweg, Stefanie

2014-07-01

This paper presents a regionalized LCA-based multiobjective optimization model of building energy demand and supply for the case of a Swiss municipality for the minimization of greenhouse gas emissions and particulate matter formation. The results show that the environmental improvement potential is very large: in the optimal case, greenhouse gas emissions from energy supply could be reduced by more than 75% and particulate emissions by over 50% in the municipality. This scenario supposes a drastic shift of heat supply systems from a fossil fuel dominated portfolio to a portfolio consisting of mainly heat pump and woodchip incineration systems. In addition to a change in heat supply technologies, roofs, windows and walls would need to be refurbished in more than 65% of the municipality's buildings. The full potential of the environmental impact reductions will hardly be achieved in reality, particularly in the short term, for example, because of financial constraints and social acceptance, which were not taken into account in this study. Nevertheless, the results of the optimization model can help policy makers to identify the most effective measures for improvement at the decision making level, for example, at the building level for refurbishment and selection of heating systems or at the municipal level for designing district heating networks. Therefore, this work represents a starting point for designing effective incentives to reduce the environmental impact of buildings. While the results of the optimization model are specific to the municipality studied, the model could readily be adapted to other regions.

An eCommerce Development Case: Your Company's eCommerce Web Site

ERIC Educational Resources Information Center

Ballenger, Robert M.

2007-01-01

This case provides a real-world semester long project-oriented case study for students enrolled in an electronic commerce course that has a significant development component. The case provides the technical framework in the form of functional requirements for students to design and build a fully functional transaction processing e-commerce Web…

Human Health Risk Assessment: A case study application of principles in dose response assessment

EPA Science Inventory

This case study application workshop will build on fundamental concepts and techniques in risk assessment presented and archived at previous TRAC meeting workshops. Practical examples from publicly available, peer reviewed risk assessments will be used as teaching aids. Course ...

Why Social Capital Is Important for Mentoring Capacity Building of Mentors: A Case Study in Hong Kong

ERIC Educational Resources Information Center

Wong, Jocelyn L. N.

2018-01-01

Most studies of school-based mentoring practice have put their key focus on discussions of the professional growth of novice teachers rather than of their mentors. Mentoring practice, however, is also a platform from which mentors can build or enhance their professional competency and capitalize their leadership role as they interact with novice…

Urban Educational Change: Building Trust and Alignment among Fragmented Coalitions of Color

ERIC Educational Resources Information Center

Stewart, Tricia J.; Finnigan, Kara S.

2017-01-01

This article is a historical case study of an attempt to build a citywide coalition in Rochester, NY. The coalition wanted to improve urban education by implementing community based wrap-around supports in a similar form as the well-respected Harlem Children's Zone. Our study found that groups had difficulty creating buy-in for this reform effort…

Building a Culture of Evidence: A Case Study of a California Community College

ERIC Educational Resources Information Center

Baker, Jill H.; Sax, Caren L.

2012-01-01

The purpose of this study was to better understand the practices associated with building a culture of evidence and to identify the factors influencing the success of such an endeavor. By definition, a culture of evidence is based upon practices employing data and research to inform decision making at all levels of the institution, with the…

Usability requirements for buildings: a case study on primary schools.

PubMed

Duca, Gabriella

2012-01-01

This paper concerns an applied research aimed at applying the concept of usability, as derived form the standard ISO 9241/11, in the filed of building design, namely primary schools. Starting from the concept that space characteristics play a very relevant role in learning performances, the study presented here developed an original methodology for the assessment of effectiveness, efficiency and satisfaction of buildings hosting primary schools, in order to create a school environment better supporting users in their tasks. Research core is the framework of usability requirements and their related markers, indicators and technical specification that has been formulated in order to check compliance of urban area, building, rooms and architectural details with users needs. Therefore, a detailed task analysis of pupils and teacher tasks has been carried out and two questionnaires addressed to a significant users panel have been formulated for satisfaction survey. Lastly, a matrix for an overall reading of gathered data has been set-up and criteria for usability assessment based on that data has been defined. The whole study has been developed within the case study of a primary school in the Naples city centre, whose contents and results are discussed.

Supporting Latino communities' natural helpers: a case study of promotoras in a research capacity building course.

PubMed

Otiniano, Angie Denisse; Carroll-Scott, Amy; Toy, Peggy; Wallace, Steven P

2012-08-01

Promotores have unique access to underserved and hard-to-reach Latino communities facing health disparities. Although promotores are involved in community change, they rarely receive training that gives them the skills to be partners in research. We present a case study of promotoras who participated in a research capacity building course focused on assessing community health needs. Data comes from course application surveys, follow-up notes, and narratives from qualitative phone interviews of eight promotoras. Content analysis drawing from grounded theory was conducted to identify and describe emerging themes. Four themes emerged as promotoras discussed their experience learning basic research skills and teaching others: (1) challenges, (2) support, (3) building capacity, and (4) using research. Promotores play an important role in the health of Latino communities and are increasingly asked to participate in research processes; however they have few opportunities for training and professional development in this area. Capacity building opportunities for promotores need to be tailored to their needs and provide them with support. Fostering collaboration between promotores and partnering with local community-based organizations can help facilitate needed research skill-building among promotores.

Case Summary: Settlement Reached at Middlefield-Ellis-Whisman (MEW) Study Area to Address TCE Contamination

EPA Pesticide Factsheets

Case summary of the first amended consent decree with Intel Corporation and Raytheon Company to address trichloroethylene (TC) contamination in residential and commercial buildings in Mountain View, California

Primary School Architecture in Portugal: A Case Study

ERIC Educational Resources Information Center

Freire da Silva, Jose M. R.

2008-01-01

Educational facilities became important public and specialised buildings since governments began to face the right of populations to education. Policies to provide educational buildings that respect modern notions of comfort and hygiene led architects to develop architectural concepts that corresponded to new demands on education. The need to…

Transitional Spaces: Mapping Physical Change

ERIC Educational Resources Information Center

Sprake, Juliet; Thomas, Helen

2007-01-01

Museums and buildings are both considered immutable by the majority of people who use them. A small team from Goldsmiths College, the V&A + RIBA Architecture Partnership and Pimlico School set out to challenge this preconception. The Victoria & Albert museum was taken as a case study to investigate how buildings are a physical…

Industrialized Building System/Two-Step Procurement Pilot Projects: Three Case Studies.

DTIC Science & Technology

1985-01-01

roughly 48,000 sq ft in size, the center houses a competition . gymnasium, natatorium, exercise and training equipment, and handball / racquetball courts...T3 -Architectural 1. General 2. Submission Documents 3. Building Form 4. Design Instructions 0 5. Materials 6. Handball Court Walls, Doors, Hardware

Schools Designed with Community Participation.

ERIC Educational Resources Information Center

Sanoff, Henry

This publication presents case studies of school buildings to demonstrate the application of a post occupancy evaluation (POE) during various stages of the design and planning process. It explains that because POE is a process for gathering information about a building in use, it can be applied effectively both to renovation and expansion projects…

Large outbreak of Legionnaires' disease and Pontiac fever at a military base.

PubMed

Ambrose, J; Hampton, L M; Fleming-Dutra, K E; Marten, C; McClusky, C; Perry, C; Clemmons, N A; McCormic, Z; Peik, S; Mancuso, J; Brown, E; Kozak, N; Travis, T; Lucas, C; Fields, B; Hicks, L; Cersovsky, S B

2014-11-01

We investigated a mixed outbreak of Legionnaires' disease (LD) and Pontiac fever (PF) at a military base to identify the outbreak's environmental source as well as known legionellosis risk factors. Base workers with possible legionellosis were interviewed and, if consenting, underwent testing for legionellosis. A retrospective cohort study collected information on occupants of the buildings closest to the outbreak source. We identified 29 confirmed and probable LD and 38 PF cases. All cases were exposed to airborne pathogens from a cooling tower. Occupants of the building closest to the cooling tower were 6·9 [95% confidence interval (CI) 2·2-22·0] and 5·5 (95% CI 2·1-14·5) times more likely to develop LD and PF, respectively, than occupants of the next closest building. Thorough preventive measures and aggressive responses to outbreaks, including searching for PF cases in mixed legionellosis outbreaks, are essential for legionellosis control.

Enabling Spaces in Education Research: An Agenda for Impactful, Collective Evidence to Support All to Be First among Un-Equals

ERIC Educational Resources Information Center

Ebersohn, Liesel

2016-01-01

Single case studies are prolific in South African education research. I equate the abundance of case studies to the urgency for evidence to transform the highly unequal landscape of education opportunities. In contrast however, stand-alone case study evidence does not offer much impact in building an evidence-based body of knowledge for education…

Applying Asynchronous Solutions to the Multi-Tasking Realities of a Teacher Education Faculty Unit: Case Study

ERIC Educational Resources Information Center

Moffett, David W.; Claxton, Melba S.; Jordan, Skye L.; Mercer, Patricia P.; Reid, Barbara K.

2007-01-01

The case study describes the early stages of building and using a learning management system (LMS) to aid in the productivity of an education faculty unit. Little to no research exists regarding teacher education units using LMSs to create an online web group for work purposes. The literature review preceding the case study illuminated some of the…

It is Time the United States Air Force Changes the way it Feeds its Airmen

DTIC Science & Technology

2008-03-01

narrative , phenomenology , ethnography , case study , and grounded theory . In purpose, these strategies are...methodology) the research will be analyzed. Methodology A qualitative research methodology and specifically a case study strategy for the...well as theory building in chapter five . Finally, in regards to reliability, Yin’s (2003) case study protocol guidance was used as a means to

The changes of densities and patterns of roads and rural buildings: a case study on Dongzhi Yuan of the Loess Plateau, China.

PubMed

Bi, Xiaoli; Wang, Hui; Ge, Jianping

2010-05-01

Roads and buildings are considered as primary causes of rural landscape changes. In this study, linear regression models were used to analyze the dynamic influences of environmental factors and variables on roads and rural buildings from 1979 to 2005 in Dongzhi Yuan (tableland) of the Loess Plateau, China. The relationship between roads and rural buildings and their effects on Dongzhi Yuan are discussed also. The results showed that three environmental factors (topography, land cover, and development level) explained roads better than rural buildings referring densities and patterns. The environmental variables significantly related to roads have decreased, whereas those related to rural buildings have increased over time. Among these significant variables, percent of farmland mostly determined the densities and patterns of both roads and rural buildings. There was significant correlation between roads and rural buildings in terms of density and pattern. In addition, roads and rural buildings have increased greatly in gully areas of this region. Therefore, more attention should be paid to planning of roads and rural buildings in Dongzhi Yuan.

Building Energy Consumption Pattern Analysis of Detached Housing for the Policy Decision Simulator

NASA Astrophysics Data System (ADS)

Lim, Jiyoun; Lee, Seung-Eon

2018-03-01

The Korean government announced its plan to raise the previous reduction goal of greenhouse gas emission from buildings by 26.9% until 2020 on July 2015. Therefore, policies regarding efficiency in the building energy are implemented fast, but the level of building owners and market understanding is low in general, and the government service system which supports decision making for implementing low-energy buildings has not been provided yet. The purpose of this study is to present the design direction for establishing user customized building energy database to perform a role to provide autonomous ecosystem of low-energy buildings. In order to reduce energy consumption in buildings, it is necessary to carry out the energy performance analysis based on the characteristics of target building. By analysing about 20-thousand cases of the amount of housing energy consumption in Korea, this study suggested the real energy consumption pattern by building types. Also, the energy performance of a building could be determined by energy consumption, but previous building energy consumption analysis programs required expert knowledge and experience in program usage, so it was difficult for normal building users to use such programs. Therefore, a measure to provide proper default using the level of data which general users with no expert knowledge regarding building energy could enter easily was suggested in this study.

Theory Building and Modeling in a Sinking and Floating Unit: A Case Study of Third and Fourth Grade Students' Developing Epistemologies of Science

ERIC Educational Resources Information Center

Kawasaki, Keiko; Rupert Herrenkohl, Leslie; Yeary, Sherry

2004-01-01

The purpose of this paper is to carefully examine the evolution of students' theory building and modeling, critical components of scientific epistemologies, over a unit of study on sinking and floating in one third/fourth grade classroom. The study described in this paper follows in the tradition of Design Experiments ( Brown 1992 , Collins 1990 )…

Oman: A Case Study on Research and Development of the Indigenous Building Methods, Materials, Local Skills and Resources. Report Studies ... C.88.

ERIC Educational Resources Information Center

Norton, John

A brief resume of a major study conducted in 1973 identifies the extent to which the indigenous building methods and materials of Oman are capable of meeting the country's contemporary shelter needs, and compares them with alternative materials and techniques being introduced as replacements. Visits to 20 towns and villages in 6 regions and…

BIM-Based Timber Structures Refurbishment of the Immovable Heritage Listed Buildings

NASA Astrophysics Data System (ADS)

Henek, Vladan; Venkrbec, Václav

2017-12-01

The use of Building information model (BIM) design tools is no longer an exception, but a common issue. When designing new buildings or complex renovations using BIM, the benefits have already been repeatedly published. The essence of BIM is to create a multidimensional geometric model of a planned building electronically on a computer, supplemented with the necessary information in advance of the construction process. Refurbishment is a specific process that combines both - new structures and demolished structures, or structures that need to be dismantled, repaired, and then returned to the original position. Often it can be historically valuable part of the building. BIM-based repairs and refurbishments of the constructions, especially complicated repairs of the structures of roof trusses of immovable heritage listed buildings, have not yet been credibly presented. However, the use of BIM tools may be advantageous in this area, because user can quickly response to the necessary changes that may be needed during refurbishments, but also in connection with the quick assessment and cost estimation of any unexpected additional works. The paper deals with the use of BIM in the field of repairs and refurbishment of the buildings in general. The emphasis on monumentally protected elements was priority. Advantage of the proposal research is demonstrated on case study of the refurbishment of the immovable heritage listed truss roof. According to this study, this construction was realized in the Czech Republic. Case study consists of 3D modelled truss parts and the connected technological workflow base. The project work was carried out in one common model environment.

Indoor Radon Concentration Related to Different Radon Areas and Indoor Radon Prediction

NASA Astrophysics Data System (ADS)

Juhásová Šenitková, Ingrid; Šál, Jiří

2017-12-01

Indoor radon has been observed in the buildings at areas with different radon risk potential. Preventive measures are based on control of main potential radon sources (soil gas, building material and supplied water) to avoid building of new houses above recommended indoor radon level 200 Bq/m3. Radon risk (index) estimation of individual building site bedrock in case of new house siting and building protection according technical building code are obligatory. Remedial actions in buildings built at high radon risk areas were carried out principally by unforced ventilation and anti-radon insulation. Significant differences were found in the level of radon concentration between rooms where radon reduction techniques were designed and those where it was not designed. The mathematical model based on radon exhalation from soil has been developed to describe the physical processes determining indoor radon concentration. The model is focused on combined radon diffusion through the slab and advection through the gap from sub-slab soil. In this model, radon emanated from building materials is considered not having a significant contribution to indoor radon concentration. Dimensional analysis and Gauss-Newton nonlinear least squares parametric regression were used to simplify the problem, identify essential input variables and find parameter values. The presented verification case study is introduced for real buildings with respect to various underground construction types. Presented paper gives picture of possible mathematical approach to indoor radon concentration prediction.

Understanding service disengagement from the perspective of case managers.

PubMed

Stanhope, Victoria; Henwood, Benjamin F; Padgett, Deborah K

2009-04-01

Disengagement from services by persons experiencing homelessness and co-occurring disorders challenges the mental health system and the frontline providers who build clinical relationships that end prematurely. This qualitative study explored how case managers understand and respond to disengagement. This study was conducted at four programs serving persons with co-occurring disorders experiencing homelessness. The qualitative design used a case study approach based on in-depth interviews with 18 case managers about 29 cases of disengagement. The study compared their accounts with predisengagement interviews when available and the postdeparture residential status of consumers. Themes were derived by independent coding and consensus. Case managers attributed disengagement primarily to substance relapse and a preference for alternative living arrangements. The following themes emerged: seeing disengagement as part of their work, believing disengagement to be poor decision making on the part of the consumer, and coping with the revolving-door syndrome. The majority of consumers experienced homelessness after disengagement. The study illustrated the challenge of building hope-instilling relationships with consumers when faced with the reality of frequent disengagement. In an era of recovery-oriented services and consumer choice, case managers need support when faced with consumer decisions to leave treatment settings. Greater program flexibility may also help to reduce disengagement.

JOB REDESIGN FOR OLDER WORKERS, TEN CASE STUDIES.

ERIC Educational Resources Information Center

MITNICK, EDWARD; ROTHBERG, HERMAN

AFTER IDENTIFYING FIRMS WHICH HAD USED JOB REDESIGN TO SALVAGE THE SKILL OF OLDER EMPLOYEES, RESEARCH INVESTIGATORS MADE 10 INTENSIVE CASE STUDIES IN FIRMS PRODUCING AIRCRAFT ENGINES, ALUMINUM FRAMING, BUILDING MATERIALS, CARPETS, COMPUTERS, COPPER PIPE FITTINGS, FOOTWEAR, HEAVY IRON PIPE, PRECISION INSTRUMENTS, AND PRINTED NOVELTIES. EACH STUDY…

Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, R.; Neymark, J.

2013-07-01

ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and themore » informative example results.« less

Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, R.; Neymark, J.

2013-07-01

ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and themore » informative example results.« less

Case Study: Teaching Nature of Science through Scientific Models--The Geocentric vs. Heliocentric Cosmology

ERIC Educational Resources Information Center

Price, Matthew; Rogers, Michael

2016-01-01

In the nonmajor science classroom, case studies--when used as learning tools--should help students build the necessary framework to understand the nature of science. For most students, the nonmajor science course (in this case, Astronomy 101) may be the last time that they interact with science in a formal learning setting. A National Science…

Micronucleus Assay in Exfoliated Buccal Epithelial Cells Using Liquid Based Cytology Preparations in Building Construction Workers.

PubMed

Arul, P; Smitha, Shetty; Masilamani, Suresh; Akshatha, C

2018-01-01

Cytogenetic damage in exfoliated buccal epithelial cells due to environmental and occupational exposure is often monitored by micronucleus (MN) assay using liquid based cytology (LBC) preparations. This study was performed to evaluate MN in exfoliated buccal epithelial cells of building construction workers using LBC preparations. LBC preparations of exfoliated buccal epithelial cells from 100 subjects [50 building construction workers (cases) and 50 administrative staffs (controls)] was evaluated by May-Grunwald Giemsa, Hematoxylin and Eosin and Papanicolaou stains. Student's t test was used for statistical analysis and a P value of <0.05 was considered as statistically significant. The mean frequencies of MN for cases were significantly higher than controls regardless of staining methods used. There were statistically significant differences between smokers and non-smokers of the controls as well as duration of working exposure (<5 and >5 years) and smokers and non-smokers of cases (P=0.001). However, there were meaningful differences regarding mean frequencies of MN between smokers, non-smokers, those with alcohol consumption or not in cases and controls using various stains (P=0.001). There was an increased risk of cytogenetic damage in building construction workers. However, evaluation of MN of exfoliated buccal epithelial cells in building construction workers serve as a minimally invasive biomarker for cytogenetic damage. LBC preparations can be applied for MN assay as it improves the quality of smears and cell morphology, decreases the confounding factors and reduces false positive results.

Development of a cellulose-based insulating composite material for green buildings: Case of treated organic waste (paper, cardboard, hash)

NASA Astrophysics Data System (ADS)

Ouargui, Ahmed; Belouaggadia, Naoual; Elbouari, Abdeslam; Ezzine, Mohammed

2018-05-01

Buildings are responsible for 36% of the final energy consumption in Morocco [1-2], and a reduction of this energy consumption of buildings is a priority for the kingdom in order to reach its energy saving goals. One of the most effective actions to reduce energy consumption is the selection and development of innovative and efficient building materials [3]. In this work, we present an experimental study of the effect of adding treated organic waste (paper, cardboard, hash) on mechanical and thermal properties of cement and clay bricks. Thermal conductivity, specific heat and mechanical resistance were investigated in terms of content and size additives. Soaking time and drying temperature were also taken into account. The results reveal that thermal conductivity decreases as well in the case of the paper-cement mixture as that of the paper-clay and seems to stabilize around 40%. In the case of the composite paper-cement, it is found that, for an additives quantity exceeding 15%, the compressive strength exceeds the standard for the hollow non-load bearing masonry. However, the case of paper-clay mixture seems to give more interesting results, related to the compressive strength, for a mass composition of 15% in paper. Given the positive results achieved, it seems possible to use these composites for the construction of walls, ceilings and roofs of housing while minimizing the energy consumption of the building.

The international implications of national and local coordination on building energy codes: Case studies in six cities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, Meredydd; Yu, Sha; Staniszewski, Aaron

Building energy efficiency is an important strategy for reducing greenhouse gas emissions globally. In fact, 55 countries have included building energy efficiency in their Nationally Determined Contributions (NDCs) under the Paris Agreement. This research uses building energy code implementation in six cities across different continents as case studies to assess what it may take for countries to implement the ambitions of their energy efficiency goals. Specifically, we look at the cases of Bogota, Colombia; Da Nang, Vietnam; Eskisehir, Turkey; Mexico City, Mexico; Rajkot, India; and Tshwane, South Africa, all of which are “deep dive” cities under the Sustainable Energy formore » All's Building Efficiency Accelerator. The research focuses on understanding the baseline with existing gaps in implementation and coordination. The methodology used a combination of surveys on code status and interviews with stakeholders at the local and national level, as well as review of published documents. We looked at code development, implementation, and evaluation. The cities are all working to improve implementation, however, the challenges they currently face include gaps in resources, capacity, tools, and institutions to check for compliance. Better coordination between national and local governments could help improve implementation, but that coordination is not yet well established. For example, all six of the cities reported that there was little to no involvement of local stakeholders in development of the national code; only one city reported that it had access to national funding to support code implementation. More robust coordination could better link cities with capacity building and funding for compliance, and ensure that the code reflects local priorities. By understanding gaps in implementation, it can also help in designing more targeted interventions to scale up energy savings.« less

The international implications of national and local coordination on building energy codes: Case studies in six cities

DOE PAGES

Evans, Meredydd; Yu, Sha; Staniszewski, Aaron; ...

2018-04-17

Building energy efficiency is an important strategy for reducing greenhouse gas emissions globally. In fact, 55 countries have included building energy efficiency in their Nationally Determined Contributions (NDCs) under the Paris Agreement. This research uses building energy code implementation in six cities across different continents as case studies to assess what it may take for countries to implement the ambitions of their energy efficiency goals. Specifically, we look at the cases of Bogota, Colombia; Da Nang, Vietnam; Eskisehir, Turkey; Mexico City, Mexico; Rajkot, India; and Tshwane, South Africa, all of which are “deep dive” cities under the Sustainable Energy formore » All's Building Efficiency Accelerator. The research focuses on understanding the baseline with existing gaps in implementation and coordination. The methodology used a combination of surveys on code status and interviews with stakeholders at the local and national level, as well as review of published documents. We looked at code development, implementation, and evaluation. The cities are all working to improve implementation, however, the challenges they currently face include gaps in resources, capacity, tools, and institutions to check for compliance. Better coordination between national and local governments could help improve implementation, but that coordination is not yet well established. For example, all six of the cities reported that there was little to no involvement of local stakeholders in development of the national code; only one city reported that it had access to national funding to support code implementation. More robust coordination could better link cities with capacity building and funding for compliance, and ensure that the code reflects local priorities. By understanding gaps in implementation, it can also help in designing more targeted interventions to scale up energy savings.« less

Technology Solutions for New and Existing Homes Case Study: Addressing Multifamily Piping Losses with Solar Hot Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Springer, M. Seitzler, and C. Backman

2016-12-01

Sun Light & Power, a San Francisco Bay Area solar design-build contractor, teamed with the U.S. Department of Energy’s Building America partner the Alliance for Residential Building Innovation (ARBI) to study this heat-loss issue. The team added three-way valves to the solar water heating systems for two 40-unit multifamily buildings. In these systems, when the stored solar hot water is warmer than the recirculated hot water returning from the buildings, the valves divert the returning water to the solar storage tank instead of the water heater. This strategy allows solar-generated heat to be applied to recirculation heat loss in additionmore » to heating water that is consumed by fixtures and appliances.« less

Multicriteria decision model for retrofitting existing buildings

NASA Astrophysics Data System (ADS)

Bostenaru Dan, B.

2003-04-01

In this paper a model to decide which buildings from an urban area should be retrofitted is presented. The model has been cast into existing ones by choosing the decision rule, criterion weighting and decision support system types most suitable for the spatial problem of reducing earthquake risk in urban areas, considering existing spatial multiatributive and multiobjective decision methods and especially collaborative issues. Due to the participative character of the group decision problem "retrofitting existing buildings" the decision making model is based on interactivity. Buildings have been modeled following the criteria of spatial decision support systems. This includes identifying the corresponding spatial elements of buildings according to the information needs of actors from different sphaeres like architects, construction engineers and economists. The decision model aims to facilitate collaboration between this actors. The way of setting priorities interactivelly will be shown, by detailing the two phases: judgemental and computational, in this case site analysis, collection and evaluation of the unmodified data and converting survey data to information with computational methods using additional expert support. Buildings have been divided into spatial elements which are characteristic for the survey, present typical damages in case of an earthquake and are decisive for a better seismic behaviour in case of retrofitting. The paper describes the architectural and engineering characteristics as well as the structural damage for constuctions of different building ages on the example of building types in Bucharest, Romania in compressible and interdependent charts, based on field observation, reports from the 1977 earthquake and detailed studies made by the author together with a local engineer for the EERI Web Housing Encyclopedia. On this base criteria for setting priorities flow into the expert information contained in the system.

External shading devices for energy efficient building

NASA Astrophysics Data System (ADS)

Shahdan, M. S.; Ahmad, S. S.; Hussin, M. A.

2018-02-01

External shading devices on a building façade is an important passive design strategy as they reduce solar radiation. Although studies have proven the benefits of external shading devices, many are designed solely for aesthetic purposes without fully considering its high potential to reduce solar radiation and glare. Furthermore, explorations into shading devices by the design team are mostly left too late in the design development phases. Hence, the paper looks into the effectiveness of external shading devices on a building towards more energy efficient building. The study aims to analyse the effects of various configurations of external shading devices towards the energy consumption of a case study building based on computer simulations. This study uses Building Information Modelling (BIM) through Autodesk Revit software as simulation tool. The constant variables for the simulation are the orientation of the building, types of glazing used by the building and the internal loads of the building. Whereas, the manipulated variable is the types of shading device used. The data were sorted according to the categories and translated into a chart. Analysis of the findings indicate that shading devices with different configurations show significant results in the energy consumption and the best configuration is the egg-crate shading devices. The study recommends that the consideration for shading device as a passive design strategy needs to be developed at the early stage of the building design.

Biomimicry as an approach for sustainable architecture case of arid regions with hot and dry climate

NASA Astrophysics Data System (ADS)

Bouabdallah, Nabila; M'sellem, Houda; Alkama, Djamel

2016-07-01

This paper aims to study the problem of thermal comfort inside buildings located in hot and arid climates. The principal idea behind this research is using concepts based on the potential of nature as an instrument that helps creating appropriate facades with the environment "building skin". The biomimetic architecture imitates nature through the study of form, function, behaviour and ecosystems of biological organisms. This research aims to clarify the possibilities that can be offered by biomimicry architecture to develop architectural bio-inspired building's design that can help to enhance indoor thermal ambiance in buildings located in hot and dry climate which helps to achieve thermal comfort for users.

Research Capacity Building: A Historically Black College/University-Based Case Study of a Peer-to-Peer Mentor Research Team Model

ERIC Educational Resources Information Center

Moore, Corey L.; Manyibe, Edward O.; Aref, Fariborz; Washington, Andre L.

2017-01-01

Purpose: To evaluate a peer-to-peer mentor research team model (PPMRTM) in building investigators' research skills (i.e., research methods and grant writing) at a historically Black college/university (HBCU) in the United States. Method: Three different theories (i.e., planned change, critical mass, and self-efficacy), contemporary study findings,…

School Administration Leadership Style and Academic Achievement: A Case Study

ERIC Educational Resources Information Center

Brvenik-Estrella, Marianna

2013-01-01

The purpose of this case study was to gather current teacher and administrator perceptions on leadership in a school environment. The study sought to identify patterns of leadership style as elements in building a school climate that focused on performance and intrinsic rewards. The study also sought to establish an understanding of how leadership…

Daylighting in Schools: Improving Student Performance and Health at a Price Schools Can Afford.

ERIC Educational Resources Information Center

Plympton, Patricia; Conway, Susan; Epstein, Kyra

This document discusses evidence regarding daylighting and student performance and development, and presents four case studies of schools that have cost effectively implemented daylighting into their buildings. Case studies reveal that design and construction strategies that incorporate daylighting do not significantly increase costs over…

Energy-Efficient Schools: Three Case Studies from Oregon.

ERIC Educational Resources Information Center

2003

This document presents case studies of three schools or districts in Oregon that have implemented steps to promote energy efficiency. Steps taken by the schools include daylighting, energy audits, special energy loans, new ventilation design, and sustainable building practices. The facilities described are Ash Creek Intermediate School in…

Building a Greenway: Using EnviroAtlas in the Classroom. CASE STUDY

EPA Science Inventory

In this hypothetical case study, funding to complete a pilot section of a greenway has been granted to a city Parks and Recreation Department. The proposed pilot section is being presented to the city council for review and approval. The proposal was drafted by the Parks and Recr...

JOB REDESIGN FOR OLDER WORKERS--CASE STUDIES.

ERIC Educational Resources Information Center

ROTHBERG, HERMAN J.

INDUSTRIAL ESTABLISHMENTS SUCCESSFULLY USED METHODS OF JOB REDESIGN TO MAINTAIN THE EMPLOYMENT AND PRODUCTIVITY, AS WELL AS THE MORALE, OF AGING EMPLOYEES. EXAMPLES OF JOB REDESIGN WERE FOUND IN A WIDE VARIETY OF MANUFACTURING INDUSTRIES. CASE STUDIES WERE MADE IN PLANTS PRODUCING AIRCRAFT ENGINES, ALUMINUM FRAMING, BUILDING MATERIALS, CARPETS,…

Schools Where Parents Make A Difference.

ERIC Educational Resources Information Center

Davies, Don, Ed.

This book presents 11 case studies that demonstrate successful efforts to improve education through building new relationships between schools and communities. In addition to presenting the case studies, the book also contains an introductory chapter that discusses the potentials and pitfalls of local efforts at participatory democracy, as well as…

Strategies for Research Development in Hospital Social Work: A Case Study

ERIC Educational Resources Information Center

McNeill, Ted; Nicholas, David Bruce

2012-01-01

Objectives: This article identifies salient components in the advancement of social work research leadership within health care. Method: Using tenets of a modified retrospective case study approach, processes and outcomes of social work research progression at a pediatric hospital are reviewed. Results: Capacity-building processes were…

Collaborative Textbook Selection: A Case Study Leading to Practical and Theoretical Considerations

ERIC Educational Resources Information Center

Czerwionka, Lori; Gorokhovsky, Bridget

2015-01-01

This case study developed a collaborative approach to the selection of a Spanish language textbook. The collaborative process consisted of six steps, detailed in this article: team building, generating evaluation criteria, formulating a meaningful rubric, selecting prospective textbooks, calculating rubric results, and reflectively reviewing…

Service-Learning and Interior Design: A Case Study

ERIC Educational Resources Information Center

Sterling, Mary

2007-01-01

The case study approach was used to analyze experiential learning through its three components: knowledge, action, and reflection. Two interior design courses were integrated through a university service-learning project. The restoration/adaptive reuse of a 95-year-old library building was to serve as a prototype for future off-campus…

Branding in Higher Education: A Case Study from Turkey

ERIC Educational Resources Information Center

Garipagaoglu, Burçak Çagla

2016-01-01

Drawing upon the brand-building experience of a young and successful Turkish foundation university, this case study attempts to broaden our understanding of branding in Higher Education (HE). Focusing on the diverse brand conceptualizations, brand management principles and brand strategies that are deployed to circumvent barriers to successful…

Mapping a Process of Negotiated Identity among Incarcerated Male Juvenile Offenders

ERIC Educational Resources Information Center

Abrams, Laura S.; Hyun, Anna

2009-01-01

Building on theories of youth identity transitions, this study maps a process of negotiated identity among incarcerated young men. Data are drawn from ethnographic study of three juvenile correctional institutions and longitudinal semistructured interviews with facility residents. Cross-case analysis of 10 cases that finds youth offenders adapted…

The Role of Simulation Case Studies in Enterprise Education

ERIC Educational Resources Information Center

Tunstall, Richard; Lynch, Martin

2010-01-01

Purpose: This paper aims to explore the role of electronic simulation case studies in enterprise education, their effectiveness, and their relationship to traditional forms of classroom-based approaches to experiential learning. The paper seeks to build on previous work within the field of enterprise and management education, specifically in…

How School Librarians Can Contribute to the Personal Growth of Students with Disabilities.

ERIC Educational Resources Information Center

Murray, Janet

2000-01-01

Discusses building self-esteem and confidence of disabled students through school library programs, based on Australian case studies. Topics include validity and reliability of case studies; the influence of teacher attitudes on student attitudes toward the disabled; physical accessibility; information literacy; information technology use; and…

Catching a Wave: An Australian Case Study on Building Competence in Search of Competitive Advantage.

ERIC Educational Resources Information Center

Kellie, Deborah

1998-01-01

A case study of an Australian road construction company's skill development project is an example of an attempt to increase competitive advantage through competency acquisition. It remains to be seen whether reconstruction of the company will result in improved productivity and financial performance. (SK)

CASE STUDY OF RADON DIAGNOSTICS AND MITIGATION IN A NEW YORK STATE SCHOOL

EPA Science Inventory

The paper discusses a case study of radon diagnostics and mitigation performed by EPA in a New York State school building. esearch focused on active subslab depressurization (ASD) in the basement and, to a lesser degree, the potential for radon reduction in the basement and slab-...

Center for the Built Environment: Research on Building HVAC Systems

Science.gov Websites

, and lessons learned. Underfloor Air Distribution (UFAD) Cooling Airflow Design Tool Developing simplified design tools for optimization of underfloor systems. Underfloor Air Distribution (UFAD) Cost Near-ZNE Buildings Setpoint Energy Savings Calculator UFAD Case Studies UFAD Cooling Design Tool UFAD

Using a Dialogue Journal to Build Responsibility and Self-Reliance: A Case Study

ERIC Educational Resources Information Center

Krebs, Cathryn

2006-01-01

Using a dialogue journal during a school year helped a 10th-grade student focus on skills that build responsibility and self-reliance. The Expanded Core Curriculum (Hatlen, 1996) addresses disability specific skills that include compensatory and social interaction skills. Providing instruction in organization, time management, and self-advocacy…

Self-Organisation and Capacity Building: Sustaining the Change

ERIC Educational Resources Information Center

Bain, Alan; Walker, Allan; Chan, Anissa

2011-01-01

Purpose: The paper aims to describe the application of theoretical principles derived from a study of self-organisation and complex systems theory and their application to school-based capacity building to support planned change. Design/methodology/approach: The paper employs a case example in a Hong Kong School to illustrate the application of…

Beyond the Central Dogma: Model-Based Learning of How Genes Determine Phenotypes

ERIC Educational Resources Information Center

Reinagel, Adam; Speth, Elena Bray

2016-01-01

In an introductory biology course, we implemented a learner-centered, model-based pedagogy that frequently engaged students in building conceptual models to explain how genes determine phenotypes. Model-building tasks were incorporated within case studies and aimed at eliciting students' understanding of 1) the origin of variation in a population…

Building the Sustainable Library at Macquarie University

ERIC Educational Resources Information Center

Brodie, Maxine

2012-01-01

This article explores a number of current issues and challenges in sustainability, both of and in academic libraries of the future, using as a case study the new library opened at Macquarie University, Sydney in 2011. Issues covered include sustainable design and operation of library buildings, sustainability in relation to library collections,…

Building a Community among Teachers, Researchers and University Students. A Blended Approach to Training

ERIC Educational Resources Information Center

Cesareni, Donatella; Martini, Francesca; Mancini, Ilaria

2011-01-01

In this paper we present a case study about a community of practice's foundation and development among Italian teachers, researchers and university students who participated in a European project aimed at developing and testing innovative pedagogical models and technologies for collaborative knowledge building. Forty-five people (34 teachers, five…

Rethinking the Education/State Formation Connection: Pedagogic Reform in Singapore, 1945-1965.

ERIC Educational Resources Information Center

Wong, Ting-Hong; Apple, Michael

2002-01-01

Previous studies of the role of education in state-building have neglected the relative autonomy and non-neutral stance of the school system. Bernstein's notion of "pedagogic device" is used to illuminate conflicts and contradictions between educational development and state-building in the case of Singapore's efforts to control the…

Building Ramps and Hovercrafts and Improving Math Skills.

ERIC Educational Resources Information Center

Bottge, Brian A.

2001-01-01

This article describes a video- and computer-based program used to motivate and develop mathematics skills in middle school students with disabilities. The program emphasizes real-life problems such as building a cage for a pet, a skate boarding ramp, and a "hovercraft" frame. Case studies illustrate the program's effectiveness with individual…

Chinese TEFL Academics' Perceptions about Research: An Institutional Case Study

ERIC Educational Resources Information Center

Bai, Li; Millwater, Jan

2011-01-01

Research capacity building has become a prominent theme in higher education institutions in China, as across the world. However, Chinese TEFL (Teaching English as a Foreign Language) academics' research capacity has been quite limited. In order to build their research capacity, it is necessary to understand their perceptions about research. This…

A Catalyst-for-Change Approach to Evaluation Capacity Building

ERIC Educational Resources Information Center

Garcia-Iriarte, Edurne; Suarez-Balcazar, Yolanda; Taylor-Ritzler, Tina; Luna, Maria

2011-01-01

Evaluation capacity building (ECB) has become a popular approach for helping community-based organizations (CBOs) to meet their funders' demands for accountability. This case study reports the ECB process with one staff member using a catalyst-for-change approach. The authors analyzed the role of the catalyst in diffusing evaluation knowledge and…

Environmental and economic evaluation of natural capital appropriation through building construction: practical case study in the Italian context.

PubMed

Bastianoni, Simone; Galli, Alessandro; Pulselli, Riccardo Maria; Niccolucci, Valentina

2007-11-01

This paper focuses on appropriation of natural capital through construction of buildings. The ecological footprint and the Costanza natural capital concepts are applied. The environmental consequences of human settlement are currently of great concern, and a need is felt to reduce the impact of building on the environment. The embodied energy of building materials and the "land area" required to sustain their production are considered to evaluate the demand on nature of this activity. The ecological footprints of 2 typical Italian buildings are compared. The paper also focuses on how to reduce the natural capital appropriation of building construction by means of environmentally inexpensive materials, renewable energy resources, and optimization of the use of bioproductive land by construction of multistoried buildings. Finally, to allocate an environmental load of buildings, an economic evaluation of natural capital appropriation through building construction is proposed.

Evaluation of green building rating tools based on existing green building achievement in Indonesia using Life Cycle Assessment Method

NASA Astrophysics Data System (ADS)

Basten, Van; Latief, Yusuf; Berawi, Mohammed Ali; Budiman, Rachmat; Riswanto

2017-03-01

Total completed building construction value in Indonesia increased 116% during 2009 to 2011. That's followed by increasing 11% energy consumption in Indonesia in the last three years with 70% energy met to the electricity needs of commercial building. In addition, a few application of green building concept in Indonesia made the greenhouse gas emissions or CO2 amount increased by 25%. Construction, operation, and maintain of building cost consider relatively high. The evaluation in this research is used to improve the building performance with some of green concept alternatives. The research methodology is conducted by combination of qualitative and quantitative approaches through interview and case study. Assessing the successful of optimization functions in the existing green building is based on the operational and maintenance phase with the Life Cycle Assessment (LCA) Method. The result of optimization that is the largest efficiency and effective of building life cycle.

Build back better principles for economic recovery: case study of the Victorian bushfires.

PubMed

Mannakkara, Sandeeka; Wilkinson, Suzanne

This paper looks at developing build back better (BBB) principles for economic recovery using the 2009 Victorian bushfires in Australia as a case study. The concept behind BBB-based economic recovery is to rejuvenate the economy in disaster-affected communities along with rebuilding to create resilient sustainable communities. A review of the literature identified several principles that can be applied to economic recovery to build back better. Data were collected in 2010 and 2011 by conducting semi- structured interviews with stakeholders who were directly involved in the Victorian bushfires recovery efforts, along with reports and other documentation. The recovery in Victoria displayed the use of BBB-based initiatives for economic recovery. The successes and shortcomings contributed to the creation of a modified list of BBB principles for economic recovery, including: creating an economic strategy based on thorough data collection; providing effective funding through grants and flexible low-interest loans; establishing business advice and mentoring services; providing incentives for businesses; assisting speedy rebuilding of business buildings; providing subsidised employee training and up-skilling programmes; and promoting local businesses through advertising.

Building research infrastructure in community health centers: a Community Health Applied Research Network (CHARN) report.

PubMed

Likumahuwa, Sonja; Song, Hui; Singal, Robbie; Weir, Rosy Chang; Crane, Heidi; Muench, John; Sim, Shao-Chee; DeVoe, Jennifer E

2013-01-01

This article introduces the Community Health Applied Research Network (CHARN), a practice-based research network of community health centers (CHCs). Established by the Health Resources and Services Administration in 2010, CHARN is a network of 4 community research nodes, each with multiple affiliated CHCs and an academic center. The four nodes (18 individual CHCs and 4 academic partners in 9 states) are supported by a data coordinating center. Here we provide case studies detailing how CHARN is building research infrastructure and capacity in CHCs, with a particular focus on how community practice-academic partnerships were facilitated by the CHARN structure. The examples provided by the CHARN nodes include many of the building blocks of research capacity: communication capacity and "matchmaking" between providers and researchers; technology transfer; research methods tailored to community practice settings; and community institutional review board infrastructure to enable community oversight. We draw lessons learned from these case studies that we hope will serve as examples for other networks, with special relevance for community-based networks seeking to build research infrastructure in primary care settings.

Building Research Infrastructure in Community Health Centers: A Community Health Applied Research Network (CHARN) Report

PubMed Central

Likumahuwa, Sonja; Song, Hui; Singal, Robbie; Weir, Rosy Chang; Crane, Heidi; Muench, John; Sim, Shao-Chee; DeVoe, Jennifer E.

2015-01-01

This article introduces the Community Health Applied Research Network (CHARN), a practice-based research network of community health centers (CHCs). Established by the Health Resources and Services Administration in 2010, CHARN is a network of 4 community research nodes, each with multiple affiliated CHCs and an academic center. The four nodes (18 individual CHCs and 4 academic partners in 9 states) are supported by a data coordinating center. Here we provide case studies detailing how CHARN is building research infrastructure and capacity in CHCs, with a particular focus on how community practice-academic partnerships were facilitated by the CHARN structure. The examples provided by the CHARN nodes include many of the building blocks of research capacity: communication capacity and “matchmaking” between providers and researchers; technology transfer; research methods tailored to community practice settings; and community institutional review board infrastructure to enable community oversight. We draw lessons learned from these case studies that we hope will serve as examples for other networks, with special relevance for community-based networks seeking to build research infrastructure in primary care settings. PMID:24004710

Deep Energy Retrofits - Eleven California Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Less, Brennan; Fisher, Jeremy; Walker, Iain

2012-10-01

This research documents and demonstrates viable approaches using existing materials, tools and technologies in owner-conducted deep energy retrofits (DERs). These retrofits are meant to reduce energy use by 70% or more, and include extensive upgrades to the building enclosure, heating, cooling and hot water equipment, and often incorporate appliance and lighting upgrades as well as the addition of renewable energy. In this report, 11 Northern California (IECC climate zone 3) DER case studies are described and analyzed in detail, including building diagnostic tests and end-use energy monitoring results. All projects recognized the need to improve the home and its systemsmore » approximately to current building code-levels, and then pursued deeper energy reductions through either enhanced technology/ building enclosure measures, or through occupant conservation efforts, both of which achieved impressive energy performance and reductions. The beyond-code incremental DER costs averaged $25,910 for the six homes where cost data were available. DERs were affordable when these incremental costs were financed as part of a remodel, averaging a $30 per month increase in the net-cost of home ownership.« less

Building capacity for implementation of the framework convention for tobacco control in Vietnam: lessons for developing countries.

PubMed

Stillman, Frances A; David, Annette M; Kibria, Naseeb; Phan, Hai Thi

2014-09-01

Effective implementation of the WHO international Framework Convention on Tobacco Control (FCTC) is the key to controlling the tobacco epidemic. Within countries, strong national tobacco control capacity is the primary determinant for successful implementation of the FCTC. This case study of tobacco control policy describes the experience of building national tobacco control capacity in Vietnam under the Reduce Smoking in Vietnam Partnership project within a national capacity-building framework. In the Vietnam experience, four components of tobacco control capacity emerged as especially important to achieve 'quality' outputs and measurable outcomes at the implementation level: (i) organizational structure/infrastructure; (ii) leadership and expertise; (iii) partnerships and networks and (iv) data and evidence from research. The experience gained in this project helps in adapting our tobacco control capacity-building model, and the lessons that emerged from this country case study can provide guidance to global funders, tobacco control technical assistance providers and nations as governments endeavor to meet their commitment to the FCTC. © The Author (2013). Published by Oxford University Press.

Excavation-caused extra deformation of existing masonry residence in soft soil region

NASA Astrophysics Data System (ADS)

Tang, Y.; Franceschelli, S.

2017-04-01

Growing need for construction of infrastructures and buildings in fast urbanization process creates challenges of interaction between buildings under construction and adjacent existing buildings. This paper presents the mitigation of contradiction between two parties who are involved the interaction using civil engineering techniques. Through the in-depth analysis of the results of monitoring surveys and enhanced accuracy and reliability of surveys, a better understanding of the behavior of deformable buildings is achieved. Combination with the original construction documents, the two parties agree that both of them are responsible for building damages and a better understanding for the rehabilitation of the existing buildings is focused on. Two cases studies are used to demonstrate and describe the importance of better understanding of the behavior of existing buildings and their rehabilitations. The objective of this study is to insight into mechanisms of soil-structure interaction for buildings adjacent to deep excavations, which can result in a damage in existing masonry residence, and to take the optimized measures to make deep excavations safety and economic and adjacent buildings keep good serviceability in urban areas with soft soil conditions.

Infrared thermography as a diagnostic tool to indicate sick-house-syndrome: a case-study

NASA Astrophysics Data System (ADS)

Ljungberg, Sven-Ake

1996-03-01

Every third child and many adults in Sweden have allergic reactions caused by indoor environmental problems. A lot of buildings constructed during the building-boom period of 1950 - 1990 expose the sick-house-syndrome, due to built-in moisture problems and poor ventilation performance of the building. Leaky building construction, transport of humid air condensing on thermal bridges within the construction gives rise to a humid environment, and forms a base for a microbial deterioration process of organic materials, with emissions hazardous for human health. So far there are no universal and cost efficient techniques or methods developed which could be used to reveal the sick-house-syndrome. In this paper we present the results of a case-study of the sick-house-syndrome, and an investigation concept with a combination of different techniques and methods to detect and to map underlying factors that form the base for microbial activities. The concept includes mobile and indoor thermography, functional control of ventilation systems, tracer gas techniques for measurement of air flow exchange rate in different rooms, microbial investigation of emissions, field inspections within the building construction and the building envelope, and medical investigation of the health status of the people working in the building. Mobile thermography of the exterior facades has been performed with a longwave AGEMA THV 900, respectively THV 1000 infrared system, during the period December 1994 - June 1995, at different and similar weather and radiation conditions, and with the building pressurized at one accession. Indoor thermography has been performed with a shortwave AGEMA THV 470 system, for a selection of objects/surfaces with thermal deviations, indicated in thermograms from the different mobile thermographic surveys. Functional control was performed for the ventilation systems, and air flow rates were measured using tracer gas technique for a selection of rooms with different function, manload and demand of air flow. Field control inspections were performed partly from the inside and partly from the outside of the building. Microbial activities were investigated by traditional measurements of the emissions and contamination of indoor air, and by ocular inspections and laboratory tests of building materials. Despite the fact that the building studied has a complicated composition of surface materials, including glass, wood, steel and concrete panels, it was possible to indirectly indicate surface anomalies, related to microbial deterioration of organic materials, through mold and rot activities, due to in-exfiltration of humid air, causing moisture problems within the construction. The result from this case-study shows that thermography can become an important diagnostic tool in order to detect and map sick-house-syndromes. The project is to be continued.

"We make the path by walking it": building an academic community partnership with Boston Chinatown.

PubMed

Rubin, Carolyn Leung; Allukian, Nathan; Wang, Xingyue; Ghosh, Sujata; Huang, Chien-Chi; Wang, Jacy; Brugge, Doug; Wong, John B; Mark, Shirley; Dong, Sherry; Koch-Weser, Susan; Parsons, Susan K; Leslie, Laurel K; Freund, Karen M

2014-01-01

The potential for academic community partnerships are challenged in places where there is a history of conflict and mistrust. Addressing Disparities in Asian Populations through Translational Research (ADAPT) represents an academic community partnership between researchers and clinicians from Tufts Medical Center and Tufts University and community partners from Boston Chinatown. Based in principles of community-based participatory research and partnership research, this partnership is seeking to build a trusting relationship between Tufts and Boston Chinatown. This case study aims to provides a narrative story of the development and formation of ADAPT as well as discuss challenges to its future viability. Using case study research tools, this study draws upon a variety of data sources including interviews, program evaluation data and documents. Several contextual factors laid the foundation for ADAPT. Weaving these factors together helped to create synergy and led to ADAPT's formation. In its first year, ADAPT has conducted formative research, piloted an educational program for community partners and held stakeholder forums to build a broad base of support. ADAPT recognizes that long term sustainability requires bringing multiple stakeholders to the table even before a funding opportunity is released and attempting to build a diversified funding base.

Building America Case Study: Cost Analysis of Roof-Only Air Sealing and Insulation Strategies on 1-1/2 Story Homes in Cold Climates, Minneapolis, MN (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The External Thermal and Moisture Management System (ETMMS), typically seen in deep energy retrofits, is a valuable approach for the roof-only portions of existing homes, particularly the 1 1/2-story home. It is effective in reducing energy loss through the building envelope, improving building durability, reducing ice dams, and providing opportunities to improve occupant comfort and health.

Case Study of the Maplewood Park Multifamily Retrofit for Energy Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Euy-Jin; Stephenson, Robert; Roberts, Sydney

2012-12-01

Maplewood Park (Maplewood), a 110-unit multifamily apartment complex in Union City, Georgia, completed major renovations under the guidance of a third-party green building certification program in October 2012. Oak Ridge National Laboratory (ORNL) partnered with Southface Energy Institute (Southface) to use this project as a case study of energy retrofits in low-rise, garden-style, multifamily buildings in the southeastern United States. This report provides a comprehensive profile of this project including the project economics, findings of the building audit, and results of the analysis of energy retrofit measures specific to this project. With a main focus of energy retrofits, this reportmore » aims to discuss other aspects of multifamily building retrofit that would benefit future projects in terms of improved building audit process, streamlined tasks, and higher energy savings in low-rise, garden-style apartments. Maplewood received Low Income Housing Tax Credit (LIHTC) financing via the 2010 Georgia Qualified Allocation Plan (QAP). To be eligible for QAP funds in Georgia, all major renovations must incorporate energy-efficiency measures and adopt a third-party green building certification. Because of the unique demands of this financing, including requirements for long-term ownership, property owners were also especially motivated to invest in upgrades that will increase durability and comfort while reducing the energy cost for the tenants.« less

Indoor Air Quality of Residential Building Before and After Renovation

NASA Astrophysics Data System (ADS)

Sánka, Imrich; Földváry, Veronika

2017-06-01

This study investigates the impact of energy renovation on the indoor air quality of an apartment building during the heating season. The study was performed in one residential building before and after its renovation. An evaluation of the indoor air quality was performed using objective measurements and a subjective survey. The concentration of CO2 was measured in the bedrooms, and a sampling of the total volatile compounds (TVOC) was performed in the living rooms of the selected apartments. Higher concentrations of CO2 and TVOC were observed in the residential building after its renovation. The concentrations of CO2, and TVOC in some of the cases exceeded the recommended maximum limits, especially after implementing energy-saving measures on the building. The average air exchange rate was visibly higher before the renovation of the building. The current study indicates that large-scale renovations may reduce the quality of an indoor environment in many apartments, especially in the winter season.

Theory Building and Modeling in a Sinking and Floating Unit: A Case Study of Third and Fourth Grade Students' Developing Epistemologies of Science. Research Report

ERIC Educational Resources Information Center

Kawasaki, Keiko; Herrenkohl, Leslie Rupert; Yeary, Sherry A.

2004-01-01

The purpose of this paper is to carefully examine the evolution of students' theory building and modeling, critical components of scientific epistemologies, over a unit of study on sinking and floating in one third/fourth grade classroom. The study described in this paper follows in the tradition of Design Experiments (Brown 1992, Collins 1990)…

Tubular House - Form Follows Technology, Concrete Shell Structure with Inner Thermal Insulation

NASA Astrophysics Data System (ADS)

Idem, Robert; Kleczek, Paweł; Pawłowski, Krzysztof; Chudoba, Piotr

2017-10-01

The aim of this paper is the theoretical analysis of the possibilities and limitations of using an unconventional technology and the original architectural form stemming from it - the building with external construction and internal insulation. In Central European climatic conditions, the traditional solution for the walls of heated buildings relies on using external thermal insulation. This stems from building physics: it prevents interstitial condensation of water vapour in the wall. Internal insulation is used exceptionally. This is done e.g. in historical buildings undergoing thermal modernization (due to the impossibility of interfering with facade). In such cases, a thermal insulation layer is used on the internal wall surface, along with an additional layer of vapour barrier. The concept of building concerns the intentional usage of an internal insulation. In this case, the construction is a tight external reinforced concrete shell. The architectural form of such building is strongly interrelated with the technology, which was used to build it. The paper presents the essence of this concept in descriptive and drawing form. The basic elements of such building are described (the external construction, the internal insulation and ventilation). As a case study, authors present a project of a residential building along with the description of the applied materials and installation solutions, and the results obtained from thermal, humidity and energetic calculations. The discussion presents the advantages and disadvantages of the proposed concept. The basic advantage of this solution is potentially low building cost. This stems from minimizing the ground works, the simplicity of the joints and the outer finish, as well as from the possibility of prefabrication of the elements. The continuity of the thermal insulation allows to reduce the amount of thermal bridges. The applied technology and form are applicable most of all for small buildings, due to limited possibilities of lighting the interior. The disadvantage of this technology is low heat accumulation of walls. A building in the proposed technology requires constant, forced ventilation. Further theoretical and practical research towards applying this concept would be necessary.

Facts and Narrative - the Concept of 4d Capturing of Heritage Building; a Case Study of Sompur Mahavihara, Bangladesh

NASA Astrophysics Data System (ADS)

Rashid, Md. M.; Rahaman, H.

2013-07-01

This study embarked upon a premise that considers architecture of building as a dynamic phenomenon. A building from its conception is susceptible to change due to various reasons. An historical building that is several hundred years old must have undergone through changes due to political, social, religious and most importantly functional reasons. Hence capturing building and its dynamic evolution is necessary to appreciate its architecture as well as its heritage value. Whereas the conventional method of fact based historiography only captures the building in particular moment. It makes architectural historians to become perplexed over to which particular moment to be documented. It is a great challenge for the architectural historians to bring back these dynamic characters of the building that are mostly inconspicuous in nature from this point of time. In this situation the historical discourse also remains elusive and blurred. The idea of 4d capturing comes in front in this scenario. Current research would venture into this emerging idea to record the architecture of the early period. This paper highlights the need for a flexible tool to capture this dynamic character of the building. By citing the case study of the 7th century Buddhist Monastery in Bengal, this paper thus argues for the need of capturing the narrative of a historical building than the facts to get a complete picture of its architecture. This study aims at capturing the narrative of Sompur Mahavihara, the UNESCO World Heritage site in Bangladesh, which is currently in ruinous condition. However, it's few hundred years life suggests that as architecture it was subject to change due to different reasons, mainly political, religious and rituals. Being a monument that belongs to the flourishing phase of a society, traditionally this monastery architecture certainly played a role as a stage for religious and political pageantry as well as different religious performances. As architecture it works as complex process of interaction of different layers of ideas, agendas and authorship through time. This paper would further explore different tools for historians to capturing this process of interaction and preserving/ conserving the narrative of this building using virtual modelling.

The Role of Philanthropic Funding in Building Research Evidence to Support an Aging Population: A Case Study from Ireland.

PubMed

Cochrane, Andy; McGilloway, Sinéad

2017-01-01

This case study examines the role of philanthropic funding in building capacity for aging research in Ireland, and how this investment has addressed the lack of evidence to support planning for an aging population. The funding has supported a range of initiatives including the national longitudinal study on aging (TILDA), the creation of three professorships/chairs, and the establishment of four new research centers. Important potential outcomes are emerging across other domains including research-informed policy development and the generation of health benefits. The efforts of academic researchers to ensure that their findings are readily accessible to end users and to forge robust working relationships with all stakeholders have helped to enhance the use of research findings. Overall, philanthropy has played a pivotal role in building capacity, infrastructure, and expertise in academic settings in Ireland. Moreover, this work provides an excellent example of how such efforts can begin to inform effective planning and service provision.

The necessity of HVAC system for the registered architectural cultural heritage building

NASA Astrophysics Data System (ADS)

Popovici, Cătălin George; Hudişteanu, Sebastian Valeriu; Cherecheş, Nelu-Cristian

2018-02-01

This study is intended to highlight the role of the ventilation and air conditioning system for a theatre. It was chosen as a case study the "Vasile Alecsandri" National Theatre of Jassy. The paper also sought to make a comparison in three distinct scenarios for HVAC Main Hall system - ventilation and air conditioning system of the Main Hall doesn't work; only the ventilation system of the Main Hall works and ventilation and air conditioning system of the Main Hall works. For analysing the comfort parameters, the ANSYS-Fluent software was used to build a 2D model of the building and simulation of HVAC system functionality during winter season, in all three scenarios. For the studied scenarios, the external conditions of Jassy and the indoor conditions of the theatre, when the entire spectacle hall is occupied were considered. The main aspects evaluated for each case were the air temperature, air velocity and relative humidity. The results are presented comparatively as plots and spectra of the interest parameters.

A numerical simulation strategy on occupant evacuation behaviors and casualty prediction in a building during earthquakes

NASA Astrophysics Data System (ADS)

Li, Shuang; Yu, Xiaohui; Zhang, Yanjuan; Zhai, Changhai

2018-01-01

Casualty prediction in a building during earthquakes benefits to implement the economic loss estimation in the performance-based earthquake engineering methodology. Although after-earthquake observations reveal that the evacuation has effects on the quantity of occupant casualties during earthquakes, few current studies consider occupant movements in the building in casualty prediction procedures. To bridge this knowledge gap, a numerical simulation method using refined cellular automata model is presented, which can describe various occupant dynamic behaviors and building dimensions. The simulation on the occupant evacuation is verified by a recorded evacuation process from a school classroom in real-life 2013 Ya'an earthquake in China. The occupant casualties in the building under earthquakes are evaluated by coupling the building collapse process simulation by finite element method, the occupant evacuation simulation, and the casualty occurrence criteria with time and space synchronization. A case study of casualty prediction in a building during an earthquake is provided to demonstrate the effect of occupant movements on casualty prediction.

Building Capacity, Fostering Institutionalization: A Study of Assessment at Independent Colleges in the United States

ERIC Educational Resources Information Center

Chong, Jocelyn S.

2009-01-01

The literature on higher education assessment provides a historical context for this study and describes best practices and their challenges. While research studies have examined institutional efforts on a case-by-case basis, little quantitatively empirical research has been conducted concerning the extent to which institutions have built capacity…

Seismic Evaluation of A Historical Structure In Kastamonu - Turkey

NASA Astrophysics Data System (ADS)

Pınar, USTA; Işıl ÇARHOĞLU, Asuman; EVCİ, Ahmet

2018-01-01

The Kastomonu province is a seismically active zone. the city has many historical buildings made of stone-masonry. In case of any probable future earthquakes, existing buildings may suffer substantial or heavy damages. In the present study, one of the historical traditional house located in Kastamonu were structurally investigated through probabilistic seismic risk assessment methodology. In the study, the building was modeled by using the Finite Element Modeling (FEM) software, SAP2000. Time history analyses were carried out using 10 different ground motion data on the FEM models. Displacements were interpreted, and the results were displayed graphically and discussed.

a Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

NASA Astrophysics Data System (ADS)

Park, Young-Tack; Kim, Jae-Hoon; Park, Hyun-Soo

1997-06-01

Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

Airborne bacterial assemblage in a zero carbon building: A case study.

PubMed

Leung, M H Y; Tong, X; Tong, J C K; Lee, P K H

2018-01-01

Currently, there is little information pertaining to the airborne bacterial communities of green buildings. In this case study, the air bacterial community of a zero carbon building (ZCB) in Hong Kong was characterized by targeting the bacterial 16S rRNA gene. Bacteria associated with the outdoor environment dominated the indoor airborne bacterial assemblage, with a modest contribution from bacteria associated with human skin. Differences in overall community diversity, membership, and composition associated with short (day-to-day) and long-term temporal properties were detected, which may have been driven by specific environmental genera and taxa. Furthermore, time-decay relationships in community membership (based on unweighted UniFrac distances) and composition (based on weighted UniFrac distances) differed depending on the season and sampling location. A Bayesian source-tracking approach further supported the importance of adjacent outdoor air bacterial assemblage in sourcing the ZCB indoor bioaerosol. Despite the unique building attributes, the ZCB microbial assemblage detected and its temporal characteristics were not dissimilar to that of conventional built environments investigated previously. Future controlled experiments and microbial assemblage investigations of other ZCBs will undoubtedly uncover additional knowledge related to how airborne bacteria in green buildings may be influenced by their distinctive architectural attributes. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Sustainable capacity building among immigrant communities: the raising sexually healthy children program in Canada.

PubMed

Narushima, Miya; Wong, Josephine Pui-Hing; Li, Anda; Sutdhibhasilp, Noulmook

2014-03-01

The Raising Sexually Healthy Children (RSHC) program is a peer-to-peer leadership training program for immigrant parents in Toronto, Canada. It was established in 1998 with the goal of promoting family sex education and parent-child communication. This evaluative study examined the developmental processes and outcomes of the RSHC program to identify the strengths, challenges and insights that can be used to improve the program. It employed a multi-case study approach to compare the RSHC programs delivered in the Chinese, Portuguese and Tamil communities. Data collection methods included focus groups, individual interviews and document analysis. The cross-case analysis identified both common and unique capacity building processes and outcomes in the three communities. In this paper, we report factors that have enhanced and hindered sustainable capacity building at the individual, group/organizational and community levels, and the strategies used by these communities to address challenges common to immigrant families. We will discuss the ecological and synergetic, but time-consuming processes of capacity building, which contributed to the sustainability of RSHC as an empowering health promotion program for immigrant communities. We conclude the paper by noting the implications of using a capacity building approach to promote family health in ethno-racial-linguistic minority communities.

The exposure assessment of airborne particulates matter (PM10 & PM2.5) towards building occupants: A case study at KL Sentral, Kuala Lumpur, Malaysia

NASA Astrophysics Data System (ADS)

Mohddin, S. A.; Aminuddin, N. M.

2014-02-01

Airborne particulates have been recognized as a crucial pollutant of indoor air. These pollutants can contribute towards poor indoor air quality (IAQ), which may affect human health in immediate or long term. This study aims to determine the level of IAQ and the effects of particulate towards occupants of office buildings (the office buildings selected for the case study are SSM, KTMB and MRCB at KL Sentral). The objectives of study are (i) to measure the level of airborne particulates that contribute to the IAQ during working hours, (ii) to compare the level of airborne particulates with the existing guidelines and standards of IAQ in Malaysia and other Asian countries and (iii) to assess the symptoms associated with airborne particulates among the building occupants, which were achieved through primary data collection (case study or site survey, structured interview and questionnaire survey) and supported by literature reviews. The results showed that the mass concentration level of airborne particulates within the areas has exceeded the allowable limit of 0.15mg/m3 by IAQ Code of Practice, 2005 of the Department of Safety and Health (DOSH), Malaysia and 0.05mg/m3 by the Department of Environmental (DOE) (outdoor) of 8 hours continuous sampling. Based on the findings, the highest mass concentration values measured is 2.581 mg/m3 at lobby of SSM building which is the highest recorded 17 times higher from the maximum limit recommended by DOSH than the others. This is due to the nearby construction works and the high numbers of particulates are generated from various types of vehicles for transportation surrounding KL Sentral. Therefore, the development of Malaysian Ambient Air Quality Guidelines on PM2.5 as one of the crucial parameters is highly recommended.

Open Space between Residential Buildings as a Factor of Sustainable Development - Case Studies in Brno (Czech Republic) and Vienna (Austria)

NASA Astrophysics Data System (ADS)

Kilnarová, Pavla; Wittmann, Maxmilian

2017-12-01

The characteristics of open spaces between residential buildings have, as authors suppose, an impact on the sustainable development of urban areas. Spatial arrangement and accessibility of these spaces, the type and height of surrounding buildings, the quantity and character of greenery, and many more characteristics influence the quality of environment, and the quality of life of local residents. These and further characteristics of the open spaces between residential buildings influence the ecological stability of the area, its hygienic qualities, the intensity and way of using by various social groups, and also the prices of real estates. These qualities indicate the environmental, social and economic sustainability of the urban area. The proposed research methodology assessed specific indicators of sustainability within a range from 0 to 10 points. 5 points correspond to the general standard in the area, 0 points indicate degradation, and 10 points indicate the highest contribution to sustainable development. Observation methods, questionnaire survey, statistical analyses, and methods of measurement were used to determine the values of the given indicators. The paper analyses the impact of the open spaces between residential buildings on sustainability via the case studies performed in the Central European cities of Brno, Czech Republic and Vienna, Austria. Two forms of residential urban structures in the City of Brno in the Czech Republic were selected for the analysis: the closed courtyards in the urban block from the 19th century and the open spaces in the housing estates constructed under socialism in the 20th century. The question is, if the different forms of spaces between residential buildings influence the sustainability of urban area and satisfaction of inhabitants in different ways. A complementary case study in Vienna indicates that inhabitants of a housing estate in Vienna, as well as inhabitants of housing estates in Brno, highly appreciate the meaning of large green open spaces between buildings. The paper presents results of basic research. The results indicate that the sustainability of open housing estate forms is higher than the authors expected.

Entering Industry: A Case Study of Links between a School Vocational Program and the Building and Construction Industry

ERIC Educational Resources Information Center

Taylor, Anthea

2004-01-01

Few studies have tracked youth transition beyond the immediate post-school period or have looked at the longer-term outcomes of post-school programs. This study reports the findings of a case study investigating links between an industry-specific school vocational education and training (VET) program and subsequent work transitions to the building…

Implementation at the School Building Level: The Development and Analysis of Nine Mini-Case Studies.

ERIC Educational Resources Information Center

Hall, Gene; And Others

As part of a district-wide longitudinal study of the implementation of a science curriculum innovation, researchers developed case studies of a sample of nine elementary schools in the Jefferson County School District, a large suburban system in Colorado. The study applied the Concerns-Based Adoption Model, which assumes that change is carried out…

A Case Study: Motivating and Supporting Faculty Members Who Teach Online Courses in a Private University

ERIC Educational Resources Information Center

Mann, Cristen

2013-01-01

The purpose of this qualitative case study was to explore how faculty members teaching online courses at one private university perceived the types of pedagogical training and support they needed in order to effectively facilitate online courses. Building on the theoretical foundation of andragogy, the study of adult education, this study explored…

Study of structural reliability of existing concrete structures

NASA Astrophysics Data System (ADS)

Druķis, P.; Gaile, L.; Valtere, K.; Pakrastiņš, L.; Goremikins, V.

2017-10-01

Structural reliability of buildings has become an important issue after the collapse of a shopping center in Riga 21.11.2013, caused the death of 54 people. The reliability of a building is the practice of designing, constructing, operating, maintaining and removing buildings in ways that ensure maintained health, ward suffered injuries or death due to use of the building. Evaluation and improvement of existing buildings is becoming more and more important. For a large part of existing buildings, the design life has been reached or will be reached in the near future. The structures of these buildings need to be reassessed in order to find out whether the safety requirements are met. The safety requirements provided by the Eurocodes are a starting point for the assessment of safety. However, it would be uneconomical to require all existing buildings and structures to comply fully with these new codes and corresponding safety levels, therefore the assessment of existing buildings differs with each design situation. This case study describes the simple and practical procedure of determination of minimal reliability index β of existing concrete structures designed by different codes than Eurocodes and allows to reassess the actual reliability level of different structural elements of existing buildings under design load.

Technology Solutions for New Homes Case Study: Columbia County Habitat for Humanity Passive Townhomes

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-04-01

The Columbia County (New York) Habitat for Humanity (Columbia County Habitat) affiliate has been experimenting with high-performance building since 2012, starting with ENERGY STAR® Certified Homes. In 2013, they constructed their first homes aimed at the Passive House standards. Building off of this effort, in 2014 they began work on a second set of Passive Townhomes in Hudson, New York, in partnership with the Advanced Residential Integrated Energy Solutions (ARIES) Building America team and BarlisWedlick Architects.

Effects of Green Buildings on Employee Health and Productivity

PubMed Central

Singh, Amanjeet; Syal, Matt; Korkmaz, Sinem

2010-01-01

We investigated the effects of improved indoor environmental quality (IEQ) on perceived health and productivity in occupants who moved from conventional to green (according to Leadership in Energy and Environmental Design ratings) office buildings. In 2 retrospective–prospective case studies we found that improved IEQ contributed to reductions in perceived absenteeism and work hours affected by asthma, respiratory allergies, depression, and stress and to self-reported improvements in productivity. These preliminary findings indicate that green buildings may positively affect public health. PMID:20634460

Interpersonal Consulting Skills for Instructional Technology Consultants: A Multiple Case Study

ERIC Educational Resources Information Center

van Leusen, Peter; Ottenbreit-Lefwich, Anne T.; Brush, Thomas

2016-01-01

Building a trust-based relationship with faculty is one of the most important attributes of effective Instructional Technology Consultants (ITC) in order to integrate emerging technologies into higher education. Utilizing a multiple case study research design, four experienced ITCs at a large urban research university located in the Midwest showed…

A Case Study of University Honors Students in Humanities through a Disciplinary Literacy Lens

ERIC Educational Resources Information Center

Cisco, Jonathan

2016-01-01

Students face challenging texts in higher education, whether they are discipline-specific journal articles or great works of literature. Building on research in content area reading and disciplinary literacy, this case study explores the various stances undergraduate honors students take when coping with challenging texts while enrolled in a…

Emotional and Social Competencies of a Principal School Leader

ERIC Educational Resources Information Center

Williams, Angelina M.

2017-01-01

Emotional and Social Competencies (ESCs) are considered important to school leadership because it is believed that they can help to build trusting relationships with staff and improve organizational capacity within the school. Limited case study research has been conducted on how ESCs are manifested in principal practice. This case study is…

The India Education Project: A Case Study of Institution Building and Organizational Conflict.

ERIC Educational Resources Information Center

Bhola, Harbans S.

This monograph, relating to events that happened during 1966-68, is a case study of a voluntary, educational, and intercultural organization that had been service oriented for almost 15 years. The organization had been organizing literacy classes, opening rural libraries, providing health extension, and conducting a small program of publication…

Transforming Engagement: A Case Study of Building Intrinsic Motivation in a Child with Autism

ERIC Educational Resources Information Center

Dearden, Jackie; Emerson, Anne; Lewis, Tom; Papp, Rebecca

2017-01-01

This longitudinal case study of a 10-year-old girl with autism and severe communication impairment measures the impact of the MORE (Means, Opportunities, Reasons and Expectations) approach to enhancing engagement and communication. Through detailed observation of video data over a period of 28 months, engagement behaviours including interaction…

Distributed Leadership with the Aim of "Reculturing": A Departmental Case Study

ERIC Educational Resources Information Center

Melville, Wayne; Jones, Doug; Campbell, Todd

2014-01-01

This article considers a secondary science department that has, since 2000, developed distributed leadership as a form of human capacity building. Using a longitudinal ethnographic case study allowed us to consider how distributed leadership can be nurtured and developed in a department. Our analysis centres on two key issues: the nature and…

Building the Innovative and Entrepreneurial University: An Institutional Case Study of Administrative Academic Capitalism

ERIC Educational Resources Information Center

McClure, Kevin R.

2016-01-01

Although researchers have explored dimensions of academic capitalism among students and faculty members, knowledge of the roles of administrators at all levels is underdeveloped in the literature. This institutional case study of a public research-extensive university examines the roles of executive and managerial administrators in bringing a…

Technology-Enhanced Learning Environments. Case Studies in TESOL Practice Series.

ERIC Educational Resources Information Center

Hanson-Smith, Elizabeth, Ed.

This edited volume presents case studies from Europe, North America, Asia, and the Middle East in which teachers have adapted and pioneered teaching innovations. The book is divided into 4 parts, 12 chapters, and an introduction. Part one, "Building a Computer Learning Center," has two chapters: "Guerilla Tactics: Creating a…

Best Practices Case Study: Tommy Williams Homes -Gainesville, FL

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-04-01

Case study of Tommy Williams Homes who has continued to outsell the competition with sales increasing despite the recession thanks to a systems-engineering approach developed with DOE’s Building America that yields high energy efficiency, comfort, and indoor air quality. The company offers to pay buyers’ energy bills for the first year.

Historic Buildings and Modern Technology: The California State Library Remodels for Automation--A Case Study.

ERIC Educational Resources Information Center

Hudson, Kathy

1987-01-01

Provides background on the California State Library, a description of the Library and Courts Building, and a summary of automation objectives. Concerns in renovation to accommodate a modern library are then discussed: (1) environment; (2) electrical and telephone circuitry; (3) data and voice communications; (4) physical factors; and (5)…

National Grid Deep Energy Retrofit Pilot Program—Clark Residence

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-03-30

In this case study, Building Science Corporation partnered with local utility company, National Grid, Massachusetts homes. This project involved the renovation of a 18th century Cape-style building and achieved a super-insulated enclosure (R-35 walls, R-50+ roof, R-20+ foundation), extensive water management improvements, high-efficiency water heater, and state-of-the-art ventilation.

Shared Modular Build of Warships: How a Shared Build Can Support Future Shipbuilding

DTIC Science & Technology

2011-01-01

design (CAD) files used for the design were not shared through this environment (Tang and Molas -Gillart, 2009). As the case studies show, shipyards...undated web page. As of December 20, 2010: http://www.fas.org/programs/ssp/man/uswpns/navy/submarines/ssn774_virginia.html Tang, Puay, and Jordi Molas

Knowledge-Building Quality in Online Communities of Practice: Focusing on Learning Dialogue

ERIC Educational Resources Information Center

Sorensen, Elsebeth K.; Takle, Eugene S.; Moser, Heather M.

2006-01-01

This paper reports on a case study on the implementation of "language games" as a pedagogical tool for analyzing, assessing and promoting the quality and the level of collaborative knowledge building in online learning dialogues. Part of the overall objective is to explore the use, strength, weaknesses, and limitations of using the…

Building a Norm of Internationalization: The Case of Estonia's Higher Education System

ERIC Educational Resources Information Center

Tamtik, Merli; Kirss, Laura

2016-01-01

The aim of this article is to explain how internationalization that is so widespread today has developed into an accepted standard in local contexts. This study demonstrates that internationalization of higher education can be regarded as a norm-building process that is facilitated through the active behavior of institutional agents. By using the…

Existing Whole-House Solutions Case Study: Build San Antonio Green, San Antonio, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-06-01

PNNL, FSEC, and CalcsPlus provided technical assistance to Build San Antonio Green on three deep energy retrofits. For this gut rehab they replaced the old roof with a steeper roof and replaced drywall while adding insulation, new HVAC, sealed ducts, transfer grilles, outside air run-time ventilation, new lighting and water heater.

Building Bridges of Understanding through Continuing Education and Professional Development of Arabs and Israelis

ERIC Educational Resources Information Center

Noyek, Arnold M.; Skinner, Harvey; Davis, Dave; Clark, Ian; Sriharan, Abi; Chalin, Catherine G.

2005-01-01

In this article, we present an educational approach uniquely linked to humanitarian and peace-building goals in conflicted regions of the world. We examine the Canada International Scientific Exchange Program and its lead program, the Middle East Association for Managing Hearing Loss, as a case study. Under a Canadian umbrella, continuing medical…

Nation Building and the University in Developing Countries: The Case of Malaysia.

ERIC Educational Resources Information Center

Ahmat, Sharom

1980-01-01

The part the university plays in the building of a nation in the post-independence period is described and illustrated by means of a detailed study of Malaysia. The impact of economic, socio-cultural, and political factors are analyzed and the objectives of higher education in contemporary Malaysia are articulated. (Author/MLW)

Scaffolding knowledge building in a Web-based communication and cultural competence program for international medical graduates.

PubMed

Lax, Leila R; Russell, M Lynn; Nelles, Laura J; Smith, Cathy M

2009-10-01

Professional behaviors, tacitly understood by Canadian-trained physicians, are difficult to teach and often create practice barriers for IMGs. The purpose of this design research study was to develop a Web-based program simulating Canadian medical literacy and culture, and to evaluate strategies of scaffolding individual knowledge building. Study 1 (N = 20) examined usability and pedagogic design. Studies 2 (N = 39) and 3 (N = 33) examined case participation patterns. Model design was validated in Study 1. Studies 2 and 3 demonstrated high levels of participation, on unprompted third tries, on knowledge tests. Recursive patterns were strongest on Reflective Exercises. Five strategies scaffolded knowledge building: (1) video simulations, (2) contextualized resources, (3) concurrent feedback, (4) Reflective Exercises, and (5) commentaries prompting "reflection on reflection." Scaffolded design supports complex knowledge building. These findings are concurrent with educational research on the importance of recursion and revision of knowledge for improvable and relational understanding.

Premium cost optimization of operational and maintenance of green building in Indonesia using life cycle assessment method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Budiman, Rachmat; Riswanto

2017-06-01

Building has a big impact on the environmental developments. There are three general motives in building, namely the economy, society, and environment. Total completed building construction in Indonesia increased by 116% during 2009 to 2011. It made the energy consumption increased by 11% within the last three years. In fact, 70% of energy consumption is used for electricity needs on commercial buildings which leads to an increase of greenhouse gas emissions by 25%. Green Building cycle costs is known as highly building upfront cost in Indonesia. The purpose of optimization in this research improves building performance with some of green concept alternatives. Research methodology is mixed method of qualitative and quantitative approaches through questionnaire surveys and case study. Assessing the successful of optimization functions in the existing green building is based on the operational and maintenance phase with the Life Cycle Assessment Method. Choosing optimization results were based on the largest efficiency of building life cycle and the most effective cost to refund.

Energy Performance Assessment of Radiant Cooling System through Modeling and Calibration at Component Level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khan, Yasin; Mathur, Jyotirmay; Bhandari, Mahabir S

2016-01-01

The paper describes a case study of an information technology office building with a radiant cooling system and a conventional variable air volume (VAV) system installed side by side so that performancecan be compared. First, a 3D model of the building involving architecture, occupancy, and HVAC operation was developed in EnergyPlus, a simulation tool. Second, a different calibration methodology was applied to develop the base case for assessing the energy saving potential. This paper details the calibration of the whole building energy model to the component level, including lighting, equipment, and HVAC components such as chillers, pumps, cooling towers, fans,more » etc. Also a new methodology for the systematic selection of influence parameter has been developed for the calibration of a simulated model which requires large time for the execution. The error at the whole building level [measured in mean bias error (MBE)] is 0.2%, and the coefficient of variation of root mean square error (CvRMSE) is 3.2%. The total errors in HVAC at the hourly are MBE = 8.7% and CvRMSE = 23.9%, which meet the criteria of ASHRAE 14 (2002) for hourly calibration. Different suggestions have been pointed out to generalize the energy saving of radiant cooling system through the existing building system. So a base case model was developed by using the calibrated model for quantifying the energy saving potential of the radiant cooling system. It was found that a base case radiant cooling system integrated with DOAS can save 28% energy compared with the conventional VAV system.« less

Phases of "pre-engagement" capacity building: discovery, exploration, and trial alliance.

PubMed

Campbell-Voytal, Kimberly

2010-01-01

Academic prevention researchers who engage limited-resource communities may find that organizational or community capacity for prevention is low. Community organizations, neighborhoods, and academic partners may lack shared issue awareness, mutual interests, and interactive skills necessary for collaborative intervention. Existing capacity building models either ignore a 'pre-engagement' phase or acknowledge it without offering strategic detail. An exploratory or developmental phase before active engagement can be achieved through co-located work in a community setting. The construct, "ecology of practice," provides conceptual background for examining how "shared work" introduces and prepares partners for future collaboration consistent with community-based participatory research (CBPR) principles. This paper presents two case studies where pre-engagement capacity building involved partners who were initially unaware, disinterested, or unable to engage in preventive interventions. These cases illustrate how mutual participation in shared "ecologies of practice" enabled an exchange of cultural knowledge, skill, and language that laid the groundwork for future preventive intervention. A trajectory of developmental work in each case occurred over 5 years. Historical timelines, interviews, and personal communications between community and academic leaders were reviewed and common themes identified. A model of "pre-capacity building" emerged. Capacity-building models that detail strategies for developing equitable engagement in under-resourced settings will more effectively move best practices into vulnerable communities. Preventive interventions must be translated equitably if health disparities are to be reduced.

Muscle-building supplement use and increased risk of testicular germ cell cancer in men from Connecticut and Massachusetts.

PubMed

Li, N; Hauser, R; Holford, T; Zhu, Y; Zhang, Y; Bassig, B A; Honig, S; Chen, C; Boyle, P; Dai, M; Schwartz, S M; Morey, P; Sayward, H; Hu, Z; Shen, H; Gomery, P; Zheng, T

2015-03-31

No analytic epidemiological study has examined the relationship between use of muscle-building supplements (MBSs) and testicular germ cell cancer (TGCC) risk. We conducted a population-based case-control study including 356 TGCC cases and 513 controls from Connecticut and Massachusetts. The odds ratio (OR) for ever use of MBSs in relation to risk of TGCC was significantly elevated (OR=1.65, 95% confidence interval (CI): 1.11-2.46). The associations were significantly stronger among early users, men with more types of MBSs used, and longer periods of use. MBS use is a potentially modifiable risk factor that may be associated with TGCC.

Science and the art of case reporting in medicine.

PubMed

Pramono, Laurentius A

2013-10-01

The case report is one type of article published in medical journals. Not all case reports can be published. Case reports worth publishing are case reports that have good teaching points and good clinical messages. Writing case reports need academic and clinical skills, along with a taste of art to interest readers to read and study about the case we report. Case reports are expected to be a good tool to all clinicians to build their clinical reasoning and sharpen their clinical instincts.

Recovery technologies for building materials

NASA Astrophysics Data System (ADS)

Karu, Veiko; Nurme, Martin; Valgma, Ingo

2015-04-01

Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

Interpretation of architecture changes by combined use of historical sources, IR Termography and GPR: the study case of San Francesco convent near Montella (AV), Italy

NASA Astrophysics Data System (ADS)

Geraldi, Edoardo; Loperte, Antonio; Dolce, Carmen

2010-05-01

In order to reconstruct architectural changes during the centuries often we are forced to trust merely on the evidences of documentary and iconographical sources which could sometimes supply the description of the monument or of a specifically building phase. Such approach does not solve all the questions related to the interpretation of historical data (graphics, descriptions) useful for finding previous configurations of the building. The historical building structure and shape, as they appear at the present are often the final result of a stratification of different phases deeply connected with artistic and technological features of the age during which the building has been designed and realized. Stylistic features, building techniques and functional aspects change in time leaving often written traces in archive sources such as on the building masonry texture (sometimes hidden by plaster) or under the floor. In such situation the Non Destructive Testing investigations by means of infrared thermography and GPR could be useful to characterize masonry, to survey inhomogeneities in the masonry as well as to detect buried walls belongings to ancient building phases. This paper deals with the emblematic study case of San Francisco convent near Montella in Southern Italy. Its complex vicissitudes experienced in last centuries have been the reason of radical transformations of the church and its surrounding buildings. Historical research provided important information on structural interventions and planimetric transformations carried out between the 17th and 18th century. Such data have been correlated with the results obtained by infrared thermography surveys on plastered facades of the convent and GPR profiles carried out under the stone paved floor of the church and cloister, thus improving the knowledge of historical building phases of the monument. The integrated use of building analysis techniques based on NDT techniques together with historical and archaeological records show the enormous potential of the use of this interdisciplinary approach.

Performance or marketing benefits? The case of LEED certification.

PubMed

Matisoff, Daniel C; Noonan, Douglas S; Mazzolini, Anna M

2014-01-01

Green building adoption is driven by both performance-based benefits and marketing based benefits. Performance based benefits are those that improve performance or lower operating costs of the building or of building users. Marketing benefits stem from the consumer response to green certification. This study illustrates the relative importance of the marketing based benefits that accrue to Leadership in Energy and Environmental Design (LEED) buildings due to green signaling mechanisms, specifically related to the certification itself are identified. Of course, all participants in the LEED certification scheme seek marketing benefits. But even among LEED participants, the interest in green signaling is pronounced. The green signaling mechanism that occurs at the certification thresholds shifts building patterns from just below to just above the threshold level, and motivates builders to cluster buildings just above each threshold. Results are consistent across subsamples, though nonprofit organizations appear to build greener buildings and engage in more green signaling than for-profit entities. Using nonparametric regression discontinuity, signaling across different building types is observed. Marketing benefits due to LEED certification drives organizations to build "greener" buildings by upgrading buildings at the thresholds to reach certification levels.

DEVELOPING AN INTEGRATED MANAGEMENT SYSTEM FOR URBAN AND ENERGY PLANNING TOWARDS A LOW-CARBON CITY

NASA Astrophysics Data System (ADS)

Maeda, Hideto; Nakakubo, Toyohiko; Tokai, Akihiro

In this study, we developed an integrated management model that supports local government to make a promising energy saving measure on a block-scale combined with urban planning. We applied the model to Osaka city and estimated CO2 emissions from the residential and commercial buildings to 2050. The urban renewal cases selected in this study included advanced multipole accumulation case, normal multipole accumulation case, and actual trend continuation case. The energy saving options introduced in each case included all-electric HP system, micro grid system, and we also set the option where the greater CO2 reduction one is selected in each block. The results showed that CO2 emission in 2050 would be reduced by 54.8-57.6% relative to the actual condition by introducing the new energy system in all cases. In addition, the amount of CO2 reduction in actual trend continuation case was highest. The major factor was that the effect of CO2 emission reductions by installing the solar power generation panel was higher than the effect by utilizing heated water mutually on the high-density blocks in terms of total urban buildings' energy consumption.

A Collaborative Approach to Experiential Learning in University Newswriting and Editing Classes: A Case Study

ERIC Educational Resources Information Center

Parks, Perry

2015-01-01

This case study examines a creative approach by two journalism professors to enhance experiential learning in separate skills-based newswriting and editing courses by collaborating to produce a live online news report from campus each week on a four-hour deadline. The study builds on previous research into how innovative classroom structures that…

Virtual Trust in US-India Global Outsource Teams: A Qualitative Exploratory Case Study

ERIC Educational Resources Information Center

Gugliotti, Domenic

2017-01-01

The purpose of this qualitative exploratory case study was to identify and analyze, trust behaviors used by members of an outsourced virtual team in an on and offshore engagement. The inability to build trust in outsourced engagements can cause serious damage to the collaboration within the virtual team causing it to fail. This study provides…

Reverse case study: to think like a nurse.

PubMed

Beyer, Deborah A

2011-01-01

Reverse case study is a collaborative, innovative, active learning strategy that nurse educators can use in the classroom. Groups of students develop a case study and a care plan from a list of medications and a short two- to three-sentence scenario. The students apply the nursing process to thoroughly develop a complete case study written as a concept map. The strategy builds on previous learned information and applies the information to new content, thus promoting critical thinking and problem solving. Reverse case study has been used in both associate and baccalaureate nursing degree theory courses to generate discussion and assist students in thinking like a nurse. 2011, SLACK Incorporated.

Teachers' and Researchers' Beliefs of Learning and the use of Learning Progressions

NASA Astrophysics Data System (ADS)

Clapp, Francis Neely

In the last decade, science education reform in the United States has emphasized the exploration of cognitive learning pathways, which are theories on how a person learns a particular science subject matter. These theories are based, in part, by Piagetian developmental theory. One such model, called Learning Progressions (LP), has become prominent within science education reform. Science education researchers design LPs which in turn are used by science educators to sequence their curricula. The new national science standards released in April 2013 (Next Generation Science Standards) are, in part, grounded in the LP model. Understanding how teachers apply and use LPs, therefore, is valuable because professional development programs are likely to use this model, given the federal attention LP have received in science education reform. I sought to identify the beliefs and discourse that both LP developers and intended LP implementers have around student learning, teaching, and learning progressions. However, studies measuring beliefs or perspectives of LP-focused projects are absent in published works. A qualitative research is therefore warranted to explore this rather uncharted research area. Research questions were examined through the use of an instrumental case study. A case study approach was selected over other methodologies, as the research problem is, in part, bound within a clearly identifiable case (a professional development experience centering on a single LP model). One of the broadest definitions of a case study is noted by Becker (1968), who stated that goals of case studies are "to arrive at a comprehensive understanding of the groups under study" and to develop "general theoretical statements about regularities in social structure and process." (p.233). Based on Merriam (1985) the general consensus in the case study literature is that the assumptions underlying this method are common to naturalistic inquiry with research conducted primarily in the field with little control of variables. Beyond this similarity, different researchers have varying definitions to case studies. Merriam's (1985) provided a summary of the delineations and varying types of case studies. Merriam divided the various case study methods by their functions, with a marked divide between theory building and non-theory building methods. Non-theory building case studies are generally descriptive, and interpretive methods that apply theory to a case or context allow researchers to better understand the phenomena observed (Lijphart, 1971; Merriam, 1985). Conversely, theory building case studies focus on hypothesis generation, theory confirming, theory informing, or theory refuting (Lijphart, 1971; Merriam, 1985). Though there are many definitions and methods labeled as 'case studies,' for the purpose of this study, Yin's (1981) definition of a case study will be used. Yin (1981) defined a case study as a method to examine "(a) a contemporary phenomenon in its real-life context, especially when (b) the boundaries between phenomenon and context are not clearly evident" (p. 59). My study seeks to apply theory and study phenomena in their context, as I will examine teachers' practice in context of their respective classrooms. This study focuses on the lived experiences of both teacher and research stakeholders within the study. Specifically, I interviewed teachers who participated in a year-long teacher-in-residence (TiR) program. In addition, researchers/content experts who conceptualized the LP were also interviewed. Because the TiR experience was a form of professional development, I propose to study the impact that it had on participants' perceptions of the LP and any teacher-reported changes in their respective classrooms. However, because beliefs influence the language that we use to describe phenomena (such as learning and teaching), it is informative to also describe patterns in how LP developers explain learning and teaching. Subsequently, the results of this study will inform literature on both science teacher professional development and LPs theory to practice.

A Business Case for Home Performance Contracting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Antonopoulos, Chrissi A.; Sevigny, Maureen

This report was prepared by PNNL for the DOE Building America program. The report provides information for businesses considering entering the home performance contracting industry. Metrics discussed include industry trends and drivers, specific points of entry, business models, startup costs, and marketing strategies. The report includes detailed analysis of eight businesses around the country that have successfully entered the home performance contracting industry. Data is provided on their financial structures, program participation, marketing efforts, and staff training. This report will be distributed via the DOE Building America website, www.buildingamerica.gov. Individual case studies will also be cleared separately.

Building of Equations of State with Numerous Phase Transitions — Application to Bismuth

NASA Astrophysics Data System (ADS)

Heuzé, Olivier

2006-07-01

We propose an algorithm to build complete equation of state EOS including several solid/solid or solid/liquid phase transitions. Each phase has its own EOS and independent parameters. The phase diagram is deduced from the thermodynamic equilibrium assumption. Until now, such an approach was used in simple cases and limited to 2 or 3 phases. We have applied it in the general case to bismuth for which up to 13 phases have been identified. This study shows the great influence of binary mixtures and triple points properties in released isentropes after shock waves.

Building code challenging the ethics behind adobe architecture in North Cyprus.

PubMed

Hurol, Yonca; Yüceer, Hülya; Şahali, Öznem

2015-04-01

Adobe masonry is part of the vernacular architecture of Cyprus. Thus, it is possible to use this technology in a meaningful way on the island. On the other hand, although adobe architecture is more sustainable in comparison to other building technologies, the use of it is diminishing in North Cyprus. The application of Turkish building code in the north of the island has created complications in respect of the use of adobe masonry, because this building code demands that reinforced concrete vertical tie-beams are used together with adobe masonry. The use of reinforced concrete elements together with adobe masonry causes problems in relation to the climatic response of the building as well as causing other technical and aesthetic problems. This situation makes the design of adobe masonry complicated and various types of ethical problems also emerge. The objective of this article is to analyse the ethical problems which arise as a consequence of the restrictive character of the building code, by analysing two case studies and conducting an interview with an architect who was involved with the use of adobe masonry in North Cyprus. According to the results of this article there are ethical problems at various levels in the design of both case studies. These problems are connected to the responsibilities of architects in respect of the social benefit, material production, aesthetics and affordability of the architecture as well as presenting distrustful behaviour where the obligations of architects to their clients is concerned.

Tracing Beliefs and Behaviors of a Participant in a Longitudinal Study for the Development of Mathematical Ideas and Reasoning: A Case Study

ERIC Educational Resources Information Center

Steffero, Maria

2010-01-01

This research provides an analysis of the relationship between a student's beliefs and mathematical behaviors over a seventeen-year period. Romina, the student of focus in this case study, was among the original participants in a longitudinal study which explored how students build mathematical ideas when working collaboratively on problem-solving…

Impact of building forms on thermal performance and thermal comfort conditions in religious buildings in hot climates: a case study in Sharjah city

NASA Astrophysics Data System (ADS)

Mushtaha, Emad; Helmy, Omar

2017-11-01

The common system used for thermal regulation in mosques of United Arab Emirates (UAE) is the heating, ventilating and air-conditioning (HVAC) system. This system increases demands on energy consumption and increases CO2 emission. A passive design approach is one of the measures to reduce these problems. This study involved an analytical examination of building forms, followed by testing the impact of these forms on its thermal performance and indoor thermal comfort. The tests were conducted using energy simulations software packages. Passive parameters such as shading devices, thermal insulation and natural ventilation were applied in six cases, including the baseline case within each form. The obtained results showed a significant effect of mosque forms as well as passive design techniques on the thermal comfort within the structures. The findings confirmed that the use of passive design alone would not help achieve thermal comfort, but reduce the annual energy consumption by10%. By integrating a hybrid air-conditioning system as another supporting approach, the annual energy consumption could be reduced by 67.5%, which allows for the designing of a much smaller HVAC system.

Strengthening health promotion in hospitals with capacity building: a Taiwanese case study.

PubMed

Lee, Chiachi Bonnie; Chen, Michael S; Chien, Sou-Hsin; Pelikan, Jürgen M; Wang, Ying Wei; Chu, Cordia Ming-Yeuk

2015-09-01

Organizational capacity building for health promotion (HP) is beneficial to the effective implementation of HP in organizational settings. The World Health Organization (WHO) Health Promoting Hospitals' (HPHs) initiative encourages hospitals to promote the health of their stakeholders by developing organizational capacity. This study analyzes an application case of one hospital of the HPH initiative in Taiwan, characterizes actions aiming at building organizational support to strengthen health gains and identifies facilitators of and barriers to the implementation of the HP in this hospital. Case study methodology was used with a triangulation of various sources; thematic analysis was used to analyze qualitative information. This study found a positive impact of the HPH initiative on the case hospital, such as more support from leadership, a fine-tuned HP mission and strategy, cultivated pro-HP habits of physical activities, a supportive intramural structure, an HP-inclusive system, improved management practices and enhanced staff participation. Transformational and transactional enablers are of equal importance in implementing HPH. However, it was also found that the case hospital encountered more transactional barriers than transformational ones. This hospital was hindered by insufficient support from external environments, leadership with limited autonomy and authority, a preference for ideals over professionalism, insufficient participation by physicians, a lack of manpower and time, a merit system with limited stimulating effect, ineffective management practices in weak central project management, a lack of integration, insufficient communication and an inability to inculcate the staff on the importance of HP, and inadequate staff participation. Several implications for other hospitals are suggested. © The Author (2014). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Effect of strong-column weak-beam design provision on the seismic fragility of RC frame buildings

NASA Astrophysics Data System (ADS)

Surana, Mitesh; Singh, Yogendra; Lang, Dominik H.

2018-04-01

Incremental dynamic analyses are conducted for a suite of low- and mid-rise reinforced-concrete special moment-resisting frame buildings. Buildings non-conforming and conforming to the strong-column weak-beam (SCWB) design criterion are considered. These buildings are designed for the two most severe seismic zones in India (i.e., zone IV and zone V) following the provisions of Indian Standards. It is observed that buildings non-conforming to the SCWB design criterion lead to an undesirable column failure collapse mechanism. Although yielding of columns cannot be avoided, even for buildings conforming to a SCWB ratio of 1.4, the observed collapse mechanism changes to a beam failure mechanism. This change in collapse mechanism leads to a significant increase in the building's global ductility capacity, and thereby in collapse capacity. The fragility analysis study of the considered buildings suggests that considering the SCWB design criterion leads to a significant reduction in collapse probability, particularly in the case of mid-rise buildings.

Solving real decay and conservation problems of building materials by ultrasounds technique

NASA Astrophysics Data System (ADS)

Alvarez de Buergo, Monica; Fort, Rafael; Gomez-Heras, Miguel; Vazquez-Calvo, Carmen

2010-05-01

In this study a variety of case studies and different building materials in which ultrasounds velocity played a significant role are shown, either to characterize building materials, to measure deterioration, to assess conservation techniques or for preventive purposes. Regarding to materials properties, ultrasounds velocity provided interesting indices such as the quality index (useful when selecting replacing materials, materials for new constructions or either for sculptures); alteration index (very much related to pores and voids, and fissures); mechanical strength (assessing its reduction when materials are affected by several decay processes, being fire one of them) or anisotropy indices, which highly condition the decay of elements and materials in buildings and sculptures, and which vary themselves with decay progress. The technique is also a tool for detecting and locating elements inside structures, like metallic ones, and also to detect and locate discontinuities inside elements, both for consolidation purposes or even in cases of structures movement, which is quite common nowadays. Using some specific software, ultrasounds results can be plotted as iso-areas, which allows to define areas or zones of structures with the highest risk of detachment in a short-time in order to plan the most adequate interventions. Not new is also the aid of ultrasonics to assess consolidation products and to determine the degree of materials decay when submitted to artificial ageing. Much more innovative is the fact that ultrasonics measurement can be also helpful to determine different building periods in a same building, even the fact of determining an element's lifetime. The results obtained by this non destructive and portable technique that will be presented in this session correspond to both real case studies (results that helped to solve a real problem), some of them corresponding to emblematic monuments de España (Royal Palace of Madrid and some other monuments belonging to the Spanish National Heritage or Trust, archaeological structures and sculptures), and also to laboratory research to understand processes and helpful to see the best way of preservation. In some of the cases, other techniques have been used as complementary, such as sclerommetry, magnetometry and IR termography. Acknowledgements: to both MATERNAS (0505/MAT/0094) and GEOMATERIALES (2009-1629) research programmes, funded by the Regional Government of Madrid; and to the CONSOLIDER-INGENIO programme (CSD2007-0058), funded by the Spanish Ministry of Education and Science.

Effects of internal gain assumptions in building energy calculations

NASA Astrophysics Data System (ADS)

Christensen, C.; Perkins, R.

1981-01-01

The utilization of direct solar gains in buildings can be affected by operating profiles, such as schedules for internal gains, thermostat controls, and ventilation rates. Building energy analysis methods use various assumptions about these profiles. The effects of typical internal gain assumptions in energy calculations are described. Heating and cooling loads from simulations using the DOE 2.1 computer code are compared for various internal gain inputs: typical hourly profiles, constant average profiles, and zero gain profiles. Prototype single-family-detached and multifamily-attached residential units are studied with various levels of insulation and infiltration. Small detached commercial buildings and attached zones in large commercial buildings are studied with various levels of internal gains. The results indicate that calculations of annual heating and cooling loads are sensitive to internal gains, but in most cases are relatively insensitive to hourly variations in internal gains.

U.S. Team Green Building Challenge 2002

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2002-09-01

Flier about the U.S. Team and its projects participating in the International Green Building Challenge. Along with many other countries, the United States accepted the Green Building Challenge (GBC), an international effort to evaluate and improve the performance of buildings worldwide. GBC started out in 1996 as a competition to determine which country had the greenest buildings; it evolved into a cooperative process among the countries to measure the performance of green buildings. Although the auto industry can easily measure efficiency in terms of miles per gallon, the buildings industry has no standard way to quantify energy and environmental performance.more » The Green Building Challenge participants hope that better tools for measuring the energy and environmental performance of buildings will be an outcome of their efforts and that these tools will lead to higher and better performance levels in buildings around the world. The ultimate goal is to design, construct, and operate buildings that contribute to global sustainability by conserving and/or regenerating natural resources and minimizing nonrenewable energy use. The United States' Green Building Challenge Team '02 selected five buildings from around the country to serve as case studies; each of the five U.S. building designs (as well as all international case studies) were assessed using an in-depth evaluation tool, called the Green Building Assessment Tool (GBTool). The GBTool was specifically created and refined by international teams, for the GBC efforts. The goal of this collaborative effort is to improve this evaluation software tool so that it can be used globally, while taking into account regional and national conditions. The GBTool was used by the U.S. Team to assess and evaluate the energy and environmental performance of these five buildings: (1) Retail (in operation): BigHorn Home Improvement Center, Silverthorne, Colorado; (2) Office (in operation), Philip Merrill Environmental; (3) School (in construction), Clearview Elementary School, Hanover, Pennsylvania; (4) Multi-family residential (in construction), Twenty River Terrace, Battery Park City, New York; and (5) Office/lab (in design), National Oceanic Atmospheric Administration, Honolulu, Hawaii. These projects were selected, not only because they were good examples of high-performance buildings and had interested owners/design team members, but also because building data was available as inputs to test the software tool. Both the tool and the process have been repeatedly refined and enhanced since the first Green Building Challenge event in 1998; participating countries are continuously providing feedback to further improve the tool and global process for the greatest positive effect.« less

The choice of primary energy source including PV installation for providing electric energy to a public utility building - a case study

NASA Astrophysics Data System (ADS)

Radomski, Bartosz; Ćwiek, Barbara; Mróz, Tomasz M.

2017-11-01

The paper presents multicriteria decision aid analysis of the choice of PV installation providing electric energy to a public utility building. From the energy management point of view electricity obtained by solar radiation has become crucial renewable energy source. Application of PV installations may occur a profitable solution from energy, economic and ecologic point of view for both existing and newly erected buildings. Featured variants of PV installations have been assessed by multicriteria analysis based on ANP (Analytic Network Process) method. Technical, economical, energy and environmental criteria have been identified as main decision criteria. Defined set of decision criteria has an open character and can be modified in the dialog process between the decision-maker and the expert - in the present case, an expert in planning of development of energy supply systems. The proposed approach has been used to evaluate three variants of PV installation acceptable for existing educational building located in Poznań, Poland - the building of Faculty of Chemical Technology, Poznań University of Technology. Multi-criteria analysis based on ANP method and the calculation software Super Decisions has proven to be an effective tool for energy planning, leading to the indication of the recommended variant of PV installation in existing and newly erected public buildings. Achieved results show prospects and possibilities of rational renewable energy usage as complex solution to public utility buildings.

Building organizational supports for knowledge sharing in county human service organizations: a cross-case analysis of works-in-progress.

PubMed

Lee, Chris; Austin, Michael J

2012-01-01

Building on the literature related to evidence-based practice, knowledge management, and learning organizations, this cross-case analysis presents twelve works-in-progress in ten local public human service organizations seeking to develop their own knowledge sharing systems. The data for this cross-case analysis can be found in the various contributions to this Special Issue. The findings feature the developmental aspects of building a learning organization that include knowledge sharing systems featuring transparency, self-assessment, and dissemination and utilization. Implications for practice focus on the structure and processes involved in building knowledge sharing teams inside public human service organizations. Copyright © Taylor & Francis Group, LLC

“We Make the Path by Walking It”: Building an Academic Community Partnership With Boston Chinatown

PubMed Central

Rubin, Carolyn Leung; Allukian, Nathan; Wang, Xingyue; Ghosh, Sujata; Huang, Chien-Chi; Wang, Jacy; Brugge, Doug; Wong, John B.; Mark, Shirley; Dong, Sherry; Koch-Weser, Susan; Parsons, Susan K.; Leslie, Laurel K.; Freund, Karen M.

2015-01-01

Background The potential for academic community partnerships are challenged in places where there is a history of conflict and mistrust. Addressing Disparities in Asian Populations through Translational Research (ADAPT) represents an academic community partnership between researchers and clinicians from Tufts Medical Center and Tufts University and community partners from Boston Chinatown. Based in principles of community-based participatory research and partnership research, this partnership is seeking to build a trusting relationship between Tufts and Boston Chinatown. Objectives This case study aims to provides a narrative story of the development and formation of ADAPT as well as discuss challenges to its future viability. Methods Using case study research tools, this study draws upon a variety of data sources including interviews, program evaluation data and documents. Results Several contextual factors laid the foundation for ADAPT. Weaving these factors together helped to create synergy and led to ADAPT’s formation. In its first year, ADAPT has conducted formative research, piloted an educational program for community partners and held stakeholder forums to build a broad base of support. Conclusions ADAPT recognizes that long term sustainability requires bringing multiple stakeholders to the table even before a funding opportunity is released and attempting to build a diversified funding base. PMID:25435562

Best Practices Case Study: Schneider Homes, Inc. - Village at Miller Creek, Burien, W

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2010-09-01

Case study of Schneider Homes, who achieved 50% savings over the 2004 IECC with analysis and recommendations from DOE’s Building America including moving ducts and furnace into conditioned space, R-23 blown fiberglass in the walls and R-38 in the attics, and high-performance HVAC, lighting, appliances, and windows.

Creating Regional Futures: A Scenario-Based Inter- and Transdisciplinary Case Study as a Model for Applied Student-Centred Learning in Geography

ERIC Educational Resources Information Center

Fromhold-Eisebith, Martina; Freyer, Bernhard; Mose, Ingo; Muhar, Andreas; Vilsmaier, Ulli

2009-01-01

Human geography students face changing qualification requirements due to a shift towards new topics, educational tasks and professional options regarding issues of spatial development. This "practical turn" raises the importance of inter- and transdisciplinary work, management and capability building skills, with case study projects and…

Capacity Building through Integration and Transformational Leadership--A Case Study

ERIC Educational Resources Information Center

Stöcklin, Sacha

2011-01-01

This article suggests that educational managers can have an influence through leadership by establishing certain moderators that integrate and shape the faculty into a solid team working towards a high performing organisation. The study looks at a case in China and draws suggestions that could be used in other similar settings. The conclusion is…

Best Practices Case Study: Tindall Homes - Princeton, NJ, Legends at Mansfield, Columbus, NJ

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-09-01

Case Study of Tindall Homes, who worked with Building America to design an optimal package including advanced framing, insulated precast concrete basement walls, polyurethane foam in the walls, and R-49 of batt plus blown cellulose in the attics. Some homes included a detached garden shed with photovoltaic panel-covered roofs.

Urban Principal's Perception of Instructional Coaching as Job-Embedded Professional Development: A Case Study

ERIC Educational Resources Information Center

Marcks, Melissa A.

2017-01-01

Instructional coaching is one method of job-embedded professional development approach that provides teachers an opportunity to build teacher expertise, raise student achievement, and advance school reform. The problem that was addressed in this qualitative case study was that few principals' understand the process of instructional coaching as…

The Lincoln Middle School Paradigm Shift: A Case Study

ERIC Educational Resources Information Center

Maninger, Robert M.; Powell, Dan

2007-01-01

This case study is presented for use with graduate students in educational administration. The intent is to further those students' preparation to deal with cultural and organizational change, along with the examination of the role of the administrative team as instructional leaders. One of the primary roles of the building principal is to be the…

Building a Dangerous Outpost in the Green Mountain State: A Case Study of Educator Preparation Policymaking

ERIC Educational Resources Information Center

McGough, David J.; Bedell, Claudine; Tinkler, Barri

2018-01-01

Poised at a bifurcation, the educator preparation community in Vermont faced either the adoption of a generic product for the assessment of initial educator licensure candidates or the comprehensive revision of a longstanding state-based assessment portfolio. Using a case study approach and narrative methods, specifically the Narrative Policy…

Circles of Support and Personalization: Exploring the Economic Case

ERIC Educational Resources Information Center

Wistow, Gerald; Perkins, Margaret; Knapp, Martin; Bauer, Annette; Bonin, Eva-Maria

2016-01-01

Circles of Support aim to enable people with learning disabilities (and others) to live full lives as part of their communities. As part of a wider study of the economic case for community capacity building conducted from 2012 to 2014, we conducted a mixed methods study of five Circles in North West England. Members of these Circles were…

As Green as We Think? The Case of the College of Charleston Green Building Initiative

ERIC Educational Resources Information Center

Owens, Katharine A.; Halfacre-Hitchcock, Angela

2006-01-01

Purpose: This paper seeks to disseminate knowledge regarding the experiences of a student team in implementing a campus-level sustainability initiative, outlining the strategy to measure the potential impact of this initiative. Design/methodology/approach: Project design is a case study. Via interviewing and surveys, the study observed student and…

Neuro-Linguistic Programming and Learning: Teacher Case Studies on the Impact of NLP in Education

ERIC Educational Resources Information Center

Carey, John; Churches, Richard; Hutchinson, Geraldine; Jones, Jeff; Tosey, Paul

2010-01-01

This research paper reports on evidence from 24 teacher-led action research case studies and builds on the 2008 CfBT Education Trust published paper by Richard Churches and John West-Burnham "Leading learning through relationships: the implications of Neurolinguistic programming for personalisation and the children's agenda in England".…

Building Technological Capability within Satellite Programs in Developing Countries

NASA Astrophysics Data System (ADS)

Wood, Danielle Renee

Global participation in space activity is growing as satellite technology matures and spreads. Countries in Africa, Asia and Latin America are creating or reinvigorating national satellite programs. These countries are building local capability in space through technological learning. They sometimes pursue this via collaborative satellite development projects with foreign firms that provide training. This phenomenon of collaborative satellite development projects is poorly understood by researchers of technological learning and technology transfer. The approach has potential to facilitate learning, but there are also challenges due to misaligned incentives and the tacit nature of the technology. Perspectives from literature on Technological Learning, Technology Transfer, Complex Product Systems and Product Delivery provide useful but incomplete insight for decision makers in such projects. This work seeks a deeper understanding of capability building through collaborative technology projects by conceiving of the projects as complex, socio-technical systems with architectures. The architecture of a system is the assignment of form to execute a function along a series of dimensions. The research questions explore the architecture of collaborative satellite projects, the nature of capability building during such projects, and the relationship between architecture and capability building. The research design uses inductive, exploratory case studies to investigate six collaborative satellite development projects. Data collection harnesses international field work driven by interviews, observation, and documents. The data analysis develops structured narratives, architectural comparison and capability building assessment. The architectural comparison reveals substantial variation in project implementation, especially in the areas of project initiation, technical specifications of the satellite, training approaches and the supplier selection process. The individual capability building assessment shows that most trainee engineers gradually progressed from no experience with satellites through theoretical training to supervised experience; a minority achieved independent experience. At the organizational level, the emerging space organizations achieved high levels of autonomy in project definition and satellite operation, but they were dependent on foreign firms for satellite design, manufacture, test and launch. The case studies can be summarized by three archetypal projects defined as "Politically Pushed," "Structured," and "Risk Taking." Countries in the case studies tended to start in a Politically Pushed mode, and then moved into either Structured or Risk Taking mode. Decision makers in emerging satellite programs can use the results of this dissertation to consider the broad set of architectural options for capability building. Future work will continue to probe how specific architectural decisions impact capability building outcomes in satellite projects and other technologies. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs@mit.edu)

Place Matters: A Mixed Methods Case Study of Institutional Place-Building in Higher Education

ERIC Educational Resources Information Center

Raykes, Jeffrey Stuart

2017-01-01

Colleges and universities are being increasingly recognized as key contributors to the well-being of the places in which they are located. However, in spite of the promise and potential of place-based engagement, there is little agreement about what place and place-building means or how these concepts can be operationalized in within the context…

Building a Reading Culture in a Singapore School: Identifying Spaces for Change through a Socio-Spatial Approach

ERIC Educational Resources Information Center

Loh, Chin Ee

2015-01-01

Research tells us that reading is correlated to academic achievement but how do we motivate students to read? How can schools build reading cultures? Through the case study of a government secondary school in Singapore, I examine how attention to the invisible network of resources that support reading can provide insight into students' resources…

A Community Development Approach to Service-Learning: Building Social Capital between Rural Youth and Adults

ERIC Educational Resources Information Center

Henness, Steven A.; Ball, Anna L.; Moncheski, MaryJo

2013-01-01

Using 4-H and FFA case study findings, this article explores how community service-learning supports the building of social capital between rural youth and adults and the positive effects on community viability. Key elements of practice form a community development approach to service-learning, which opens up doorways for youth to partner with…

Building and Leading a Learning Culture among Teachers: A Case Study of a Shanghai Primary School

ERIC Educational Resources Information Center

Haiyan, Qian; Walker, Allan; Xiaowei, Yang

2017-01-01

A positive teacher learning culture is important to effect meaningful changes in schools. Literature has established that successful school leaders can build and nurture learning cultures among teachers. However, less is known about how school leaders can shape the culture and make learning conditions happen at the schools in the Chinese education…

Building Local Economic Development Capacity: A Case Study of Santa Fe College in Gainesville, Florida

ERIC Educational Resources Information Center

Bredfeldt, Erik A.

2009-01-01

This dissertation examines the role of the community college in building institutional capacity within the context of a community's local and regional economy and provides recommendations on the manner in which the role of the community college can be enhanced with respect to interaction with other urban and regional partners. It seeks to at least…

Indonesia--Innovation in the Management of Primary School Construction: A Case Study. Education Building Report 8.

ERIC Educational Resources Information Center

Hussin

This UNESCO report describes the progress of primary school building development under the second Five Year Plan of the Government of Indonesia. The main objective of the construction program was to increase the enrollement of children of primary school age to 85 per cent of all eligible children. Chapter I provides an historical perspective on…

Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

NASA Astrophysics Data System (ADS)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

Demand controlled ventilating systems: Sensor market survey. Energy conservation in buildings and community systems programme, annex 18, December 1991

NASA Astrophysics Data System (ADS)

Raatschen, W.; Sjoegren, M.

The subject of indoor and outdoor air quality has generated a great deal of attention in many countries. Areas of concern include outgassing of building materials as well as occupant-generated pollutants such as carbon dioxide, moisture, and odors. Progress has also been made towards addressing issues relating to the air tightness of the building envelope. Indoor air quality studies indicate that better control of supply flow rates as well as the air distribution pattern within buildings are necessary. One method of maintaining good indoor air quality without extensive energy consumption is to control the ventilation rate according to the needs and demands of the occupants, or to preserve the building envelope. This is accomplished through the use of demand controlled ventilating (DCV) systems. The specific objective of Annex 18 is to develop guidelines for demand controlled ventilating systems based on state of the art analyses, case studies on ventilation effectiveness, and proposed ventilation rates for different users in domestic, office, and school buildings.

Pollutant Dilution and Diffusion in Urban Street Canyon Neighboring Streets

NASA Astrophysics Data System (ADS)

Sun, Z.; Fu, Zh. M.

2011-09-01

In the present study we investigated the airflow patterns and air quality of a series of typical street canyon combinations, developed a mass balance model to determine the local pollutant dilution rate, and discuss the impact of upstream canyon on the air quality of downstream canyon. The results indicated that the geometrical size of upstream and downstream buildings have significant impacts on the ambient airflow patterns. The pollution distribution within the canyons varies with different building combinations and flow patterns. Within the upstream canyon, pollution always accumulates to the low building side for non-symmetrical canyon, and for symmetrical canyon high level of pollution occurs at the leeward side. The height of the middle and downstream buildings can evidently change the pollutant dispersion direction during the transport process. Within the polluted canyon, the pollutant dilution rate (PDR) also varies with different street canyon combinations. The highest PDR is observed when the upstream buildings are both low buildings no matter the height of downstream building. However, the two cases are likely to contribution pollution to the downstream canyon. The H-L-H combination is mostly against local pollution remove, while the L-H-L case is considered the best optimistic building combination with both the ability of diluting local pollution and not remarkably decreasing air quality of downstream canyon. The current work is expected instructive for city designers to optimize traffic patterns under typical existing geometry or in the development of urban geometry modification for air quality control.

Passive fire protection in high density village (case study, Bustaman Semarang)

NASA Astrophysics Data System (ADS)

Sukawi, Sukawi; Wahyu Firmandhani, Satriya; Hardiman, Gagoek

2017-12-01

Fire hazard is the disaster that always has an unpredictable process of coming. When it comes, its level scope and the magnitude of the effects cannot be predicted. Dense settlements especially in big cities, among others Bustaman Kampong Semarang never escape from physical problems such as flooding and wildfire. If both are compared in dense settlements scope, so that, wild fire is the most potentially catastrophic. It is necessary to do a research on passive fire protection in a village of high density city such as Bustaman. Qualitative research was conducted using descriptive method to conduct observations and interviews in the Bustaman. Bustaman as a high density village, with narrow roads and dense rows of houses. The terraced buildings are also encountered, and found many buildings use combustible material. That environmental conditions can facilitate the propagation of flames in case of fire. To improve the established Bustaman's environment, in terms of the application of passive fire protection systems, it is recommended to utilize the road as the dividing buildings. Need to build the separation wall fireproof in every each series in several units of too long buildings and attempted open space procurement that separates rows of buildings that are too long, and also the replacement of combustible material with a material that is more incombustible.

Rehabilitation of a Distressed Single Storied Building Founded on Expansive Soil: A Case Study

NASA Astrophysics Data System (ADS)

Pakrashi, Somdev

2017-12-01

A single storied building was constructed on strip foundation system—on a subsoil, with high expansivity, without taking necessary precautions and it suffered extensive cracks and damages in roof slab, beams, columns and brick walls, subsidence /upheavals in floors etc. within 2/3 years of its construction and consequently it had to be abandoned. The study examines the reasons for the severe damages, cracks etc. and also suggests remediation by ground improvement and other necessary measures that were actually taken up, to rehabilitate the highly distressed and abandoned building within a reasonably short period of time—at a reasonable cost.

Attributes of the Federal Energy Management Program's Federal Site Building Characteristics Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loper, Susan A.; Sandusky, William F.

2010-12-31

Typically, the Federal building stock is referred to as a group of about one-half million buildings throughout the United States. Additional information beyond this level is generally limited to distribution of that total by agency and maybe distribution of the total by state. However, additional characterization of the Federal building stock is required as the Federal sector seeks ways to implement efficiency projects to reduce energy and water use intensity as mandated by legislation and Executive Order. Using a Federal facility database that was assembled for use in a geographic information system tool, additional characterization of the Federal building stockmore » is provided including information regarding the geographical distribution of sites, building counts and percentage of total by agency, distribution of sites and building totals by agency, distribution of building count and floor space by Federal building type classification by agency, and rank ordering of sites, buildings, and floor space by state. A case study is provided regarding how the building stock has changed for the Department of Energy from 2000 through 2008.« less

Acquisition and Processing Protocols for Uav Images: 3d Modeling of Historical Buildings Using Photogrammetry

NASA Astrophysics Data System (ADS)

Murtiyoso, A.; Koehl, M.; Grussenmeyer, P.; Freville, T.

2017-08-01

Photogrammetry has seen an increase in the use of UAVs (Unmanned Aerial Vehicles) for both large and smaller scale cartography. The use of UAVs is also advantageous because it may be used for tasks requiring quick response, including in the case of the inspection and monitoring of buildings. The objective of the project is to study the acquisition and processing protocols which exist in the literature and to adapt them for UAV projects. This implies a study on the calibration of the sensors, flight planning, comparison of software solutions, data management, and analysis on the different products of a UAV project. Two historical buildings of the city of Strasbourg were used as case studies: a part of the Rohan Palace façade and the St-Pierre-le-Jeune Catholic church. In addition, a preliminary test was performed on the Josephine Pavilion. Two UAVs were used in this research; namely the Sensefly Albris and the DJI Phantom 3 Professional. The experiments have shown that the calibration parameters tend to be unstable for small sensors. Furthermore, the dense matching of images remains a particular problem to address in a close range photogrammetry project, more so in the presence of noise on the images. Data management in cases where the number of images is high is also very important. The UAV is nevertheless a suitable solution for the surveying and recording of historical buildings because it is able to take images from points of view which are normally inaccessible to classical terrestrial techniques.

Lessons Learned From Transitioning PEPFAR Track 1.0 Care and Treatment Programs: Case Studies in Financial Management Capacity Building in Zambia and Botswana.

PubMed

Kuehn, Chuck; Tidwell, George; Vhugen, Jann; Sharma, Anjali

2015-01-01

In 2008, the United States government mandated transition of internationally managed HIV care and treatment programs to local country ownership. Three case studies illustrate the US Health Resources Services Administration's fiscal assessment and technical assistance (TA) processes to strengthen local organizations' capabilities to absorb and manage United States government funding. Review of initial, TA and follow-up reports reveal that the 1 Botswanan and 2 Zambian organizations closed 10 of 17 financial capacity gaps, with Health Resources Services Administration assisting on 2. Zambian organizations requested and absorbed targeted TA on the basis of the consultant's desk review, their finance staff revised fiscal policies and procedures, and accordingly trained other staff. In Botswana, delays in integrating recommendations necessitated on-site TA for knowledge building and role modeling. Organizational maturity may explain differences in responsiveness, ownership, and required TA approaches. Clarifying expectations of capacity building, funding agreement, and nonmonetary donor involvement can help new organizations determine and act on intervening actions.

Comparative analysis of economic models in selected solar energy computer programs

NASA Astrophysics Data System (ADS)

Powell, J. W.; Barnes, K. A.

1982-01-01

The economic evaluation models in five computer programs widely used for analyzing solar energy systems (F-CHART 3.0, F-CHART 4.0, SOLCOST, BLAST, and DOE-2) are compared. Differences in analysis techniques and assumptions among the programs are assessed from the point of view of consistency with the Federal requirements for life cycle costing (10 CFR Part 436), effect on predicted economic performance, and optimal system size, case of use, and general applicability to diverse systems types and building types. The FEDSOL program developed by the National Bureau of Standards specifically to meet the Federal life cycle cost requirements serves as a basis for the comparison. Results of the study are illustrated in test cases of two different types of Federally owned buildings: a single family residence and a low rise office building.

Assessment of energy and economic performance of office building models: a case study

NASA Astrophysics Data System (ADS)

Song, X. Y.; Ye, C. T.; Li, H. S.; Wang, X. L.; Ma, W. B.

2016-08-01

Energy consumption of building accounts for more than 37.3% of total energy consumption while the proportion of energy-saving buildings is just 5% in China. In this paper, in order to save potential energy, an office building in Southern China was selected as a test example for energy consumption characteristics. The base building model was developed by TRNSYS software and validated against the recorded data from the field work in six days out of August-September in 2013. Sensitivity analysis was conducted for energy performance of building envelope retrofitting; five envelope parameters were analyzed for assessing the thermal responses. Results indicated that the key sensitivity factors were obtained for the heat-transfer coefficient of exterior walls (U-wall), infiltration rate and shading coefficient (SC), of which the sum sensitivity factor was about 89.32%. In addition, the results were evaluated in terms of energy and economic analysis. The analysis of sensitivity validated against some important results of previous studies. On the other hand, the cost-effective method improved the efficiency of investment management in building energy.

The street as an area of human exposure in an earthquake aftermath: the case of Lorca, Spain, 2011

NASA Astrophysics Data System (ADS)

Bertran Rojo, Marc; Beck, Elise; Lutoff, Céline

2017-04-01

The earthquake which struck the city of Lorca, Spain, on 11 May 2011 killed 9 people, injured over 300 and caused considerable damage, including one collapsed building. Streets near buildings were the main danger areas for people. This article proposes an dynamic ad hoc spatio-temporal method for studying individual evacuation after an earthquake. Its application to the Lorca case shows the spatial and temporal variability of individual exposure levels in the street during the hours following the shock. As yet little studied, human exposure deserves more attention, particularly in zones of moderate seismicity like the Euro-Mediterranean area. The results of this study could be helpful for enhancing the evacuation planning after an earthquake, stressing the specific dangers in the street.

Navigating in Stormy Waters

ERIC Educational Resources Information Center

Lopez, Ann E.; Button, Jacqueline

2013-01-01

This case study examines the tensions of social justice and culturally relevant leadership. It also examines the challenges of school administration and building cohesive teams. This case engages readers in theorizing about social justice and culturally relevant school leadership as well as thinking about practical ways to make the endeavour…

Building on a YMCA's health and physical activity promotion capacities: A case study of a researcher-organization partnership to optimize adolescent programming_.

PubMed

Bush, Paula Louise; García Bengoechea, Enrique

2016-08-01

School-based physical activity programs are only effective for increasing adolescents' school-based physical activity. To increase out-of-school-time physical activity, complementary community programs are warranted. Partnerships between universities and community organizations may help build the capacity of these organizations to provide sustainable programs. To understand capacity building processes and outcomes, we partnered with a YMCA to build on their adolescent physical activity promotion capacity. Together, we designed and implemented means to evaluate the YMCA teen program to inform program planning. For this qualitative case study, emails and interviews and meetings transcripts were collected over 2.5 years and analyzed using inductive and deductive thematic analysis. Findings illustrate that the YMCA's workforce and organizational development capacities (e.g., evaluation and health promotion capacity and competence) were increased through our partnership, resource allocation, and leadership. We responded to YMCA partners' perceived needs, yet guided them beyond those needs, successfully combining our complementary objectives, knowledge, and skills to generate an integrated program vision, rationale, and evaluation results. This provided YMCA partners with validation, reminders, and awareness. In turn, this contributed to programming and evaluation practice changes. In light of extant capacity building literature, we discuss how our partnership increased the YMCA's capacity to promote healthy adolescent programs. Copyright © 2016 Elsevier Ltd. All rights reserved.

a Geodatabase for Multisource Data Applied to Cultural Heritage: the Case Study of Villa Revedin Bolasco

NASA Astrophysics Data System (ADS)

Guarnieri, A.; Masiero, A.; Piragnolo, M.; Pirotti, F.; Vettore, A.

2016-06-01

In this paper we present the results of the development of a Web-based archiving and documenting system aimed to the management of multisource and multitemporal data related to cultural heritage. As case study we selected the building complex of Villa Revedin Bolasco in Castefranco Veneto (Treviso, Italy) and its park. Buildings and park were built in XIX century after several restorations of the original XIV century area. The data management system relies on a geodatabase framework, in which different kinds of datasets were stored. More specifically, the geodatabase elements consist of historical information, documents, descriptions of artistic characteristics of the building and the park, in the form of text and images. In addition, we used also floorplans, sections and views of the outer facades of the building extracted by a TLS-based 3D model of the whole Villa. In order to manage and explore these rich dataset, we developed a geodatabase using PostgreSQL and PostGIS as spatial plugin. The Web-GIS platform, based on HTML5 and PHP programming languages, implements the NASA Web World Wind virtual globe, a 3D virtual globe we used to enable the navigation and interactive exploration of the park. Furthermore, through a specific timeline function, the user can explore the historical evolution of the building complex.

DOE Zero Energy Ready Home Case Study: Transformations, Inc., Production House, Devens, Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-09-01

A collaboration with Building America team Building Science Corporation helped this builder win a 2013 Housing Innovation Award in 2013—a 2,508-ft2 home built on speculation in the Devens, MA, subdivision. For the above-grade walls, the super-insulated building shell starts with 12 inch thick double walls composed of two 2x4 16-inch on-center walls spaced 5 inches apart. The space between the walls is filled with low-density (open-cell) spray foam for an insulation value of R-45.

Creating A 3D urban model by terrestrial laser scanners and photogrammetry techniques: a case study on the historical peninsula of Istanbul

NASA Astrophysics Data System (ADS)

Ergun, Bahadir

2007-07-01

Today, terrestrial laser scanning has been a frequently used methodology for the documentation of historical buildings and cultural heritages. The historical peninsula region is the documentation of historical buildings and cover approximately 1500 ha. Terrestrial laser scanning and close range image photogrammetry techniques are integrated to each other to create a 3D urban model of Istanbul including the most important landmarks and the buildings reflecting the most brilliant areas of Byzantine and Ottoman Empires.

Knowledge-based model building of proteins: concepts and examples.

PubMed Central

Bajorath, J.; Stenkamp, R.; Aruffo, A.

1993-01-01

We describe how to build protein models from structural templates. Methods to identify structural similarities between proteins in cases of significant, moderate to low, or virtually absent sequence similarity are discussed. The detection and evaluation of structural relationships is emphasized as a central aspect of protein modeling, distinct from the more technical aspects of model building. Computational techniques to generate and complement comparative protein models are also reviewed. Two examples, P-selectin and gp39, are presented to illustrate the derivation of protein model structures and their use in experimental studies. PMID:7505680

Using Building Seismic Strong-Motion Data to Quantify Urban Blast Pressure Fields

NASA Astrophysics Data System (ADS)

Massari, A.; Kohler, M. D.; Heaton, T. H.; Kanamori, H.; Hauksson, E.; Clayton, R. W.; Guy, R.; Bunn, J.; Chandy, M.

2015-12-01

The use of building vibrations to measure blast wave propagation in a city is examined in this case study. The Exxon Mobil Corp. oil refinery in Torrance, California experienced an explosion on February 18, 2015 causing ground shaking equivalent to a magnitude 1.9 earthquake. The impulse response for the source was computed from Southern California Seismic Network data for a multi-orthogonal force system with a value of 2×105 kN vertically downward. The pressure wave excited by the explosion traveled through the city of Los Angeles, and was detected by a dense accelerometer array in a 52-story building also in downtown Los Angeles 22.8 km from the explosion. The array is part of the Community Seismic Network (CSN) and consists of three-component class-C MEMs sensors located on each floor of the building. The detection was verified by the nearly simultaneous arrival times of acceleration pulses on multiple floors of the building, corresponding to an average wave speed near the speed of sound in air. The pressure wave peak magnitude from the air blast was determined using accelerometer data collected on every floor of the building coupled with the elastic response of the structure as a whole. . Making use of high-fidelity finite element modeling of the building validated by previous low-level seismicity and ambient noise data, a procedure is outlined for pressure wave detection and quantification on well instrumented buildings. This case study for a 52 story building, instrumented by the CSN, acts as a proxy for blast wave quantification in dense urban environments. This type of information can be used to understand the flow of blast waves through a cityscape as well as enhance procedures for estimating blast source magnitude. Better understanding of the propagation of pressure waves in urban environments will lead to the development of improved countermeasures in those environments.

Building a Community of Scholars: One University's Comparison of "Typical" vs. Open Ended Ethics Case Studies in First-Year Engineering

ERIC Educational Resources Information Center

Reid, Kenneth J.

2012-01-01

Ethics is among the professional skills embedded in the first year engineering curriculum in many institutions. The general format of the study of ethics is similar to many other institutions: student teams review case studies and develop written and oral presentations on the ethical issues encountered. This report investigates whether the use of…

Why Children Join and Stay in Sports Clubs: Case Studies in Australian, French and German Swimming Clubs

ERIC Educational Resources Information Center

Light, Richard L.; Harvey, Stephen; Memmert, Daniel

2013-01-01

This article builds upon research on youth sport clubs conducted from a socio-cultural perspective by reporting on a study that inquired into the reasons why children aged 9-12 joined swimming clubs in France, Germany and Australia. Comprising three case studies it employed a mixed method approach with results considered within the framework of…

Building Adaptive Capacity of Pathways in Technology Early College High School Stakeholders: A Multiple-Case Study on the Influence of Performance, Leadership, and Organizational Learning

ERIC Educational Resources Information Center

Michaud-Wells, Amy

2016-01-01

The purpose of this qualitative study was to explore the perceptions and beliefs of Pathways in Technology Early College High School (P-TECH) leaders and stakeholders regarding the personal and professional experiences that contributed to the development of adaptive capacity. This embedded multiple-case study was anchored by the interrelated…

Community-acquired Legionnaires' Disease in a Newly Constructed Apartment Building.

PubMed

Ryu, Sukhyun; Yang, Kyungho; Chun, Byung Chul

2017-07-01

Legionnaires' disease (LD) is a severe type of pneumonia caused by inhalation of aerosols contaminated with Legionella . On September 22, 2016, a single case of LD was reported from a newly built apartment building in Gyeonggi province. This article describes an epidemiologic investigation of LD and identification of the possible source of infection. To identify the source of LD, we interviewed the patient's husband using a questionnaire based on the Legionella management guidelines from the Korea Centers for Disease Control and Prevention. Water samples from the site were collected and analyzed. An epidemiological investigation of the residents and visitors in the apartment building was conducted for 14 days before the index patient's symptoms first appeared to 14 days after the implementation of environmental control measures. Legionella pneumophila serogroup 1 was isolated from the heated-water samples from the patient's residence and the basement of the apartment complex. Thirty-two suspected cases were reported from the apartment building during the surveillance period, yet all were confirmed negative based on urinary antigen tests. The likely source of infection was the building's potable water, particularly heated water. Further study of effective monitoring systems in heated potable water should be considered.

33. INTERIOR VIEW LOOKING WEST IN MAIN BUILDING FROM CANT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. INTERIOR VIEW LOOKING WEST IN MAIN BUILDING FROM CANT ROLL CASE IMMEDIATELY WEST OF BEAM SAW. NOTE RE-SAW AT LEFT OF ROLL CASE, TRIM SAW OPERATOR'S STATION JUST TO RIGHT OF ROLL CASE, AND TRIM SAWS AT RIGHT MIDDLE GROUND. HEAD RIG IS IN BACKGROUND DOWN ROLL CASE IN CENTER OF PHOTOGRAPH. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

Building a Dignified Identity: An Ethnographic Case Study of LGBT Catholics.

PubMed

Radojcic, Natasha

2016-10-01

This ethnographic case study offers insight into religiously devout sexual minorities and the reasons behind their continued participation in an anti-gay religious institution, the Roman Catholic Church. I demonstrate how members of Dignity, an organization for gay, lesbian, bisexual, and transgender (LGBT) Catholics, strategically use their identity as gay Catholics to initiate action, to build community, and to destigmatize other religious sexual minorities. Members leverage this unique identity to push for change and equality within the Church. At the same time, this identity also allows members to see their continued participation in the anti-gay Roman Catholic Church as activism, a positive and affirming identity, thereby alleviating potential conflict and contradiction between their sexuality and their spirituality as Roman Catholics.

Powering Up: Assessing the growing municipal energy resilience building efforts in North America

NASA Astrophysics Data System (ADS)

Schimmelfing, Kara

Energy related shortages and price volatilities can impact all levels of society. With coming fossil fuel depletion related to peak oil, it is expected these shortages and volatilities will increase in frequency, duration, and intensity. Resilience building is a strategy to minimize the effects of these events by modifying systems so they are less impacted and/or recover more quickly from disruptive events. Resilience building is being used, particularly at the municipal scale, to prepare for these coming energy related changes. These municipal efforts have only been in existence for five to ten years, and full implementation is still in progress. Little evaluation has been done of these municipal efforts to date, particularly in North America. Despite this, it is important to begin to assess the effectiveness of these efforts now. As a result, future efforts can be redirected to address weak areas and that lessons learned by vanguard communities can be applied in other communities attempting to build energy resilience in the future. This thesis involved the creation of a hybrid framework to evaluate municipal energy resilience building efforts. The framework drew primarily from planning process and factors identified as important to build resilience in social-ecological systems. It consisted of the following categories to group resilience building efforts: Economy, Resource Systems & Infrastructure, Public Awareness, Social Services, Transportation, Built Environment, and Natural Environment. Within these categories the following process steps should be observed: Context, Goals, Needs, Processes, and Outcomes. This framework was then tested through application to four case-study communities (Bloomington, IN, Hamilton, ON, Oakland, CA, Victoria, BC) currently pursuing energy resilience building efforts in North America. This qualitative research involved document analysis primarily of municipal documents related to energy planning efforts. Supplementary interviews were also conducted to verify the findings from the documents and illuminate anything not captured by them. Once data was collected, categorized and analyzed using the framework, comparisons were made between case-studies. Results showed the framework to be a successful, but time consuming, tool for assessing municipal energy resilience building. Four revisions are recommended for the framework before further research. Analysis of the case study communities' efforts also identified five factors for recommended for other communities attempting energy resilience planning at the municipal scale: consistent support from within the municipality, integration and information sharing, presence of key resources, access to information on energy use, and a two-tier planning process. Ultimately, as this is a preliminary attempt to address a young and growing area of municipal effort, there are many avenues for further research to build on the work of this thesis.

Estimation of human damage and economic loss of buildings for the worst-credible scenario of tsunami inundation in the city of Augusta, Italy

NASA Astrophysics Data System (ADS)

Pagnoni, Gianluca; Tinti, Stefano

2017-04-01

The city of Augusta is located in the southern part of the eastern coast of Sicily. Italian tsunami catalogue and paleo-tsunami surveys indicate that at least 7 events of tsunami affected the bay of Augusta in the last 4,000 years, two of which are associated with earthquakes (1169 and 1693) that destroyed the city. For these reasons Augusta has been chosen in the project ASTARTE as a test site for the study of issues related to tsunami hazard and risk. In last two years we studied hazard through the approach of the worst-case credible scenario and carried out vulnerability and damage analysis for buildings. In this work, we integrate that research, and estimate the damage to people and the economic loss of buildings due to structural damage. As regards inundation, we assume both uniform inundation levels (bath-tub hypothesis) and inundation data resulting from the worst-case scenario elaborated for the area by Armigliato et al. (2015). Human damage is calculated in three steps using the method introduced by Pagnoni et al. (2016) following the work by Terrier et al. (2012) and by Koshimura et al. (2009). First, we use census data to estimate the number of people present in each residential building affected by inundation; second, based on water column depth and building type, we evaluate the level of damage to people; third, we provide an estimate of fatalities. The economic loss is computed for two types of buildings (residential and trade-industrial) by using data on inundation and data from the real estate market. This study was funded by the EU Project ASTARTE - "Assessment, STrategy And Risk Reduction for Tsunamis in Europe", Grant 603839, 7th FP (ENV.2013.6.4-3)

Accurate facade feature extraction method for buildings from three-dimensional point cloud data considering structural information

NASA Astrophysics Data System (ADS)

Wang, Yongzhi; Ma, Yuqing; Zhu, A.-xing; Zhao, Hui; Liao, Lixia

2018-05-01

Facade features represent segmentations of building surfaces and can serve as a building framework. Extracting facade features from three-dimensional (3D) point cloud data (3D PCD) is an efficient method for 3D building modeling. By combining the advantages of 3D PCD and two-dimensional optical images, this study describes the creation of a highly accurate building facade feature extraction method from 3D PCD with a focus on structural information. The new extraction method involves three major steps: image feature extraction, exploration of the mapping method between the image features and 3D PCD, and optimization of the initial 3D PCD facade features considering structural information. Results show that the new method can extract the 3D PCD facade features of buildings more accurately and continuously. The new method is validated using a case study. In addition, the effectiveness of the new method is demonstrated by comparing it with the range image-extraction method and the optical image-extraction method in the absence of structural information. The 3D PCD facade features extracted by the new method can be applied in many fields, such as 3D building modeling and building information modeling.

Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a 'Power of Zero Energy Center' linked to its model home in the Stapleton community of Denver. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for themore » homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. The case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.« less

Commercial Buildings Partnerships - Overview of Higher education projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parrish, Kristen; Robinson, Alastair; Regnier, Cindy

2013-02-01

The Commercial Building Partnership (CBP), a public/private, cost-shared program sponsored by the U.S. Department of Energy (DOE), paired selected commercial building owners and operators with representatives of DOE, its national laboratories, and private-sector technical experts. These teams explored energy-saving measures across building systems – including some considered too costly or technologically challenging – and used advanced energy modeling to achieve peak whole-building performance. Modeling results were then included in new construction or retrofit designs to achieve significant energy reductions. CBP design goals aimed to achieve 50 percent energy savings compared to ANSI/ASHRAE/IES Standard 90.1-2004 for new construction, while retrofits aremore » designed to consume at least 30 percent less energy than either Standard 90.1-2004 or current consumption. After construction and commissioning of the project, laboratory staff continued to work with partners to collect and analyze data for verification of the actual energy reduction. CBP projects represent diverse building types in commercial real estate, including lodging, grocery, retail, higher education, office, and warehouse/storage facilities. Partners also commit to replicating low-energy technologies and strategies from their CBP projects throughout their building portfolios. As a result of CBP projects, five sector overviews (Lodging, Food Sales, General Merchandise, Higher Education, Offices) were created to capture successful strategies and recommended energy efficiency measures that could broadly be applied across these sectors. These overviews are supplemented with individual case studies providing specific details on the decision criteria, modeling results, and lessons learned on specific projects. Sector overviews and CBP case studies will also be updated to reflect verified data and replication strategies as they become available.« less

Comparative seismic evaluation between numerical analysis and Italian guidelines on cultural heritage applied to the case study of a masonry building compound

NASA Astrophysics Data System (ADS)

Formisano, Antonio; Chiumiento, Giovanni; Fabbrocino, Francesco; Landolfo, Raffaele

2017-07-01

The general objective of the work is to draw attention to the issue of seismic vulnerability analysis of masonry building compounds, which characterise most of the Italian historic towns. The study is based on the analysis of an aggregated construction falling in the town of Arsita (Teramo, Italy) damaged after the 2009 L'Aquila earthquake. A comparison between the seismic verifications carried out by using the 3Muri commercial software and those deriving from the application of the Italian Guidelines on Cultural Heritage has been performed. The comparison has shown that Guidelines provide results on the safe side in predicting the seismic behaviour of the building compound under study. Further analyses should be performed aiming at suggesting some modifications of the used simplified calculation method to better interpret the behaviour of building compounds under earthquake.

A case study of the use of GPR for rehabilitation of a classified Art Deco building: The InovaDomus house

NASA Astrophysics Data System (ADS)

Barraca, Nuno; Almeida, Miguel; Varum, Humberto; Almeida, Fernando; Matias, Manuel Senos

2016-04-01

Ancient buildings in historical town centers can be protected by Cultural Heritage legislation, thus implying that any rehabilitation must respect their main architectural features. These concerns also apply to Modern and Contemporary buildings, in particular if they are important examples of architectural styles from those periods. These extra problems, or motivations, add to the inherent structural delicacy of ancient building restoration that requires detailed knowledge of the building foundations, characteristics and materials, modification history, infrastructure mapping, current pathologies, etc., all relevant information for an informed rehabilitation project. Such knowledge is seldom available before the actual rehabilitation works begin, and the usual invasive preliminary surveys are frequently expensive, time-consuming and likely significantly alter/damage the building's main features or structural integrity. Hence, the current demand for indirect, non-invasive, reliable and high resolution imagery techniques able to produce relevant information at the early stages of a rehabilitation project. The present work demonstrates that Ground Penetrating Radar (GPR or Georadar) surveys can provide a priori knowledge on the structure, construction techniques, materials, history and pathologies in a classified Modern Age building. It is also shown that the use of GPR on these projects requires carefully designed surveys, taking into account the known information, spatial constraints, environmental noise, nature and dimensions of the expected targets and suitable data processing sequences. Thus, if properly applied, GPR produces high-resolution results crucial for sound engineering/architectural interventions aiming to restore and renovate Modern and Contemporary buildings, with (1) focus on the overall quality of the end-result, (2) no damage inflicted to the existing structure, (3) respect of the building's historical coherence and architectural elements and characteristics, that is, its Cultural Heritage value. Most of the findings and applications discussed in this work can be seen as an approximation to model studies, so that, relevant information can be drawn from the different investigated situations. Therefore, owing to the nature and the range of the problems encountered in this case study, it is also expected that the presented GPR data and interpretation will provide important clues and guidance in the planning and investigation of similar projects and problems.

An expensive adult measles outbreak and response in office buildings during the era of accelerated measles elimination, Beijing, China.

PubMed

Ma, Rui; Lu, Li; Suo, Luodan; Li, Xiaomei; Yang, Fan; Zhou, Tao; Zhai, Lijun; Bai, Hongwei; Pang, Xinghuo

2017-02-22

Few measles outbreaks among adults are reported in China, and outbreak response costs are seldom documented. We report an adult measles outbreak and response in 4 linked office buildings in Beijing and its associated costs. The World Health Organization measles case definitions were used to determine suspected and confirmed measles cases. Surveillance data were used to describe the outbreak, and records and interviews of response staff were used to describe the response. Costs were determined by use of retrospective surveys of cases, review of records, and interviews of staff. The outbreak lasted 19days, and involved 22 cases aged 23-49years. Nineteen cases had a local household registration. All cases were employed by 8 companies in 4 linked office buildings. Among the 22 cases, 8 had temperature less than 38.5 degree, 18 had no Koplik spots and none had complications or hospitalizations. A total of 7930 contacts were identified, and of these, 6869 were employees in the office buildings. All the child contacts aged 8months-14years had been up-to-date for measles-containing vaccine (MCV); no adult could document their vaccination or measles history. Of contacts, about 96% were offered post-exposure vaccination. The total household costs were $13,298, or $605 per case. Control costs were $384,594, or $17,481 per case. Involved companies paid for 90.7% of control costs. Office buildings provide a mechanism for measles transmission. Timely control activities were challenged by the highly infectious nature of measles and mild presentations of cases. The outbreak response was very costly. Financial support by involved companies can provide needed resources for outbreak management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Building Community Bonds, Bridges, and Linkages to Promote the Career Readiness of High School Students in the United States

ERIC Educational Resources Information Center

Hernandez-Gantes, Victor M.; Keighobadi, Sasha; Fletcher, Edward C., Jr.

2018-01-01

The career readiness of high school students has been a longstanding issue that has received renewed attention in recent years. To document an approach to promoting career readiness in the United States, we conducted an exploratory case study of a distinguished information technology career academy. Using the premises of capital building as a…

Building America Case Study: Field Testing of Compartmentalization Methods for Multifamily Construction (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2015-01-01

The 2012 IECC has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure for both single family and multifamily construction in Climate Zones 3-8. Other programs (LEED, ASHRAE 189, ASHRAE 62.2) have similar or tighter compartmentalization requirements, thus driving the need for easier and more effective methods of compartmentalization in multifamily buildings.

New Whole-House Solutions Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-02-10

A zero energy ready home was recently completed that features an innovative wall system. This highly insulated (high-R) light-frame wall system, called the extended plate and beam, is for use above grade in residential buildings. The Building America research team Home Innovation Research Labs featured this system in a new construction test house.

Building Rain Water Tanks and Building Skills: A Case Study of a Women's Organization in Uganda

ERIC Educational Resources Information Center

Payne, Deborah; Nakato, Margaret; Nabalango, Caroline

2008-01-01

Water collection in rural areas of Uganda is left primarily to women and children. Katosi Women Development Trust, an NGO based in rural Uganda has focused on addressing the gender-linked issue of increased water sources near the home through the construction of rain water collection tanks. In an effort to improve the income of members as well as…

The Human Dimension of Energy Conservation and Sustainability: A Case Study of the University of Michigan's Energy Conservation Program

ERIC Educational Resources Information Center

Marans, Robert W.; Edelstein, Jack Y.

2010-01-01

Purpose: The purpose of this paper is to determine the behaviors, attitudes, and levels of understanding among faculty, staff, and students in efforts to design programs aimed at reducing energy use in University of Michigan (UM) buildings. Design/methodology/approach: A multi-method approach is used in five diverse pilot buildings including focus…

The Use of Facebook to Build a Community for Distance Learning Students: A Case Study from the Open University

ERIC Educational Resources Information Center

Callaghan, George; Fribbance, Ian

2016-01-01

Social media platforms such as Facebook are commonplace throughout society. However, within higher education institutions such networking environments are still in the developmental stage. This paper describes and discusses case study data from the Open University's Faculty of Social Science Facebook page. It starts by giving an overview of the…

Leadership to Build a Democratic Community within School: A Case Study of Two Korean High Schools

ERIC Educational Resources Information Center

Kang, Young Taek; Printy, Susan

2009-01-01

This article aims to explore how democratic community is manifest in schools in Korea. It also tries to examine how leadership, specifically transformational leadership, functions in shaping a democratic community within a school. Toward this aim, we have conducted a case study of two religious high schools in Korea. Based on the findings from the…

Problem-Based Learning Spanning Real and Virtual Words: A Case Study in Second Life

ERIC Educational Resources Information Center

Good, Judith; Howland, Katherine; Thackray, Liz

2008-01-01

There is a growing use of immersive virtual environments for educational purposes. However, much of this activity is not yet documented in the public domain, or is descriptive rather than analytical. This paper presents a case study in which university students were tasked with building an interactive learning experience using Second Life as a…

Exploratory Case Studies of the Role of the Community School Coordinator: Developing the School Social Network in Urban Elementary Schools

ERIC Educational Resources Information Center

Ruffin, Verna Dean

2013-01-01

This exploratory case study examines the role of the community school coordinator (CSC) in the community school model in two urban elementary schools. It seeks to understand how the role and responsibilities of a community school coordinator supports fostering relationships with parents, teachers, students and the community (i.e. building the…

Model-It: A Case Study of Learner-Centered Software Design for Supporting Model Building.

ERIC Educational Resources Information Center

Jackson, Shari L.; Stratford, Steven J.; Krajcik, Joseph S.; Soloway, Elliot

Learner-centered software design (LCSD) guides the design of tasks, tools, and interfaces in order to support the unique needs of learners: growth, diversity and motivation. This paper presents a framework for LCSD and describes a case study of its application to the ScienceWare Model-It, a learner-centered tool to support scientific modeling and…

Building Self-Directed Teachers: A Case Study of Teachers' Perspectives of the Effects of Cognitive Coaching on Professional Practices

ERIC Educational Resources Information Center

Bjerken, Kevin S.

2013-01-01

This case study of a single school district aims to identify teachers' perceptions of how their professional practices have been affected after four years of receiving Cognitive Coaching. Cognitive Coaching was used in participants' professional development as a part of an Alternative Teacher Professional Pay System and included three…

Building Bridges: A Case Study of the Perceptions of Parents of Students with Autism Spectrum Disorder (ASD) towards Family

ERIC Educational Resources Information Center

Lautenbacher, Susan L.

2013-01-01

This qualitative case study examines the perceptions of parents of students with autism spectrum disorder (ASD) towards family/school partnerships. Interviews were conducted with parents of children with autism that belonged to a parent support group in western Pennsylvania. The resulting interviews cast light on the motivators and barriers that…

BladeRunners and Picasso Cafe: A Case Study Evaluation of Two Work-Based Training Programs for Disadvantaged Youth.

ERIC Educational Resources Information Center

Currie, Sheila; Foley, Kelly; Schwartz, Saul; Taylor-Lewis, Musu

In 1998, Canada's Social Research and Demonstration Corporation (SRDC) conducted case studies of two work-based training and skill development programs for street youth in Vancouver, British Columbia. The BladeRunners program places youth on construction sites while encouraging them to work toward an apprenticeship in the building trades. The…

Online Education: Analysis of Interaction and Knowledge Building Patterns among Foreign Language Teachers

ERIC Educational Resources Information Center

Celentin, Paola

2007-01-01

In this article we discuss findings from a case-study related to the distance education of teachers of Italian as a second/foreign language. This case-study has examined interactions among teachers during their discussions in a web-forum exploiting the model of content analysis proposed in the "Practical Inquiry Model" by Garrison, Anderson, and…

Opportunities and Challenges for Building Alumni Networks in Sweden: A Case Study of Stockholm University

ERIC Educational Resources Information Center

Ebert, Karin; Axelsson, Leona; Harbor, Jon

2015-01-01

Because of the potential value of alumni involvement for student success, for connections to society and as a base for future philanthropy, there is growing interest in developing university alumni relations programmes in countries that do not have a long tradition in this area. This case study of Stockholm University describes the goals,…

URBANopt Advanced Analytics Platform | Buildings | NREL

Science.gov Websites

-use districts, different buildings may peak in energy consumption at different times. In certain cases applications. Districts, Neighborhoods, and Campuses For districts with different building types and mixed-use buildings? How does energy consumption vary depending on different building efficiency scenarios (e.g

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build...-way acquisition and clearance services may be incorporated into the design-build contract if allowed...

Seismic response and damage detection analyses of an instrumented steel moment-framed building

USGS Publications Warehouse

Rodgers, J.E.; Celebi, M.

2006-01-01

The seismic performance of steel moment-framed buildings has been of particular interest since brittle fractures were discovered at the beam-column connections in a number of buildings following the M 6.7 Northridge earthquake of January 17, 1994. A case study of the seismic behavior of an extensively instrumented 13-story steel moment frame building located in the greater Los Angeles area of California is described herein. Response studies using frequency domain, joint time-frequency, system identification, and simple damage detection analyses are performed using an extensive strong motion dataset dating from 1971 to the present, supported by engineering drawings and results of postearthquake inspections. These studies show that the building's response is more complex than would be expected from its highly symmetrical geometry. The response is characterized by low damping in the fundamental mode, larger accelerations in the middle and lower stories than at the roof and base, extended periods of vibration after the cessation of strong input shaking, beating in the response, elliptical particle motion, and significant torsion during strong shaking at the top of the concrete piers which extend from the basement to the second floor. The analyses conducted indicate that the response of the structure was elastic in all recorded earthquakes to date, including Northridge. Also, several simple damage detection methods employed did not indicate any structural damage or connection fractures. The combination of a large, real structure and low instrumentation density precluded the application of many recently proposed advanced damage detection methods in this case study. Overall, however, the findings of this study are consistent with the limited code-compliant postearthquake intrusive inspections conducted after the Northridge earthquake, which found no connection fractures or other structural damage. ?? ASCE.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44%more » whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.« less

Coordination between Understanding Historic Buildings and BIM Modelling: A 3D-Output Oriented and typological Data Capture Method

NASA Astrophysics Data System (ADS)

Li, K.; Li, S. J.; Liu, Y.; Wang, W.; Wu, C.

2015-08-01

At the present, in trend of shifting the old 2D-output oriented survey to a new 3D-output oriented survey based on BIM technology, the corresponding working methods and workflow for data capture, process, representation, etc. have to be changed.Based on case study of two buildings in the Summer Palace of Beijing, and Jiayuguan Pass at the west end of the Great Wall (both World Heritage sites), this paper puts forward a "structure-and-type method" by means of typological method used in archaeology, Revit family system, and the tectonic logic of building to realize a good coordination between understanding of historic buildings and BIM modelling.

An intervention for early mathematical success: outcomes from the hybrid version of the Building Math Readiness Parents as Partners (MRPP) project.

PubMed

Kritzer, Karen L; Pagliaro, Claudia M

2013-01-01

The Building Math Readiness in Young Deaf/Hard-of- Hearing Children: Parents as Partners (MRPP) Project works with parents to increase the understanding of foundational mathematics concepts in their preschool deaf/hard-of-hearing (d/hh) children in preparation for formal mathematics education. A multiple-case/single-unit case study incorporating descriptive statistics and grounded theory analysis was conducted on the hybrid version of the intervention. Results showed productive changes in parental behaviors indicating a possible positive effect on parent knowledge, recognition, and mediation of early matthematics concepts with their young d/hh children.

Balancing Hydronic Systems in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruch, Russell; Ludwig, Peter; Maurer, Tessa

2014-07-01

In multifamily hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution, and controls. The imbalance leads to tenant discomfort, higher energy use intensity, and inefficient building operation. This research, conducted by Building America team Partnership for Advanced Residential Retrofit, explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs. The team surveyed existing knowledge on cost-effective retrofits for optimizing distribution inmore » typical multifamily hydronic systems, with the aim of identifying common situations and solutions, and then conducted case studies on two Chicago area buildings with known balancing issues in order to quantify the extent of temperature imbalance. At one of these buildings a booster pump was installed on a loop to an underheated wing of the building. This study found that unit temperature in a multifamily hydronic building can vary as much as 61°F, particularly if windows are opened or tenants use intermittent supplemental heating sources like oven ranges. Average temperature spread at the building as a result of this retrofit decreased from 22.1°F to 15.5°F.« less

Building Interoperable FHIR-Based Vocabulary Mapping Services: A Case Study of OHDSI Vocabularies and Mappings.

PubMed

Jiang, Guoqian; Kiefer, Richard; Prud'hommeaux, Eric; Solbrig, Harold R

2017-01-01

The OHDSI Common Data Model (CDM) is a deep information model, in which its vocabulary component plays a critical role in enabling consistent coding and query of clinical data. The objective of the study is to create methods and tools to expose the OHDSI vocabularies and mappings as the vocabulary mapping services using two HL7 FHIR core terminology resources ConceptMap and ValueSet. We discuss the benefits and challenges in building the FHIR-based terminology services.

Relative significance of heat transfer processes to quantify tradeoffs between complexity and accuracy of energy simulations with a building energy use patterns classification

NASA Astrophysics Data System (ADS)

Heidarinejad, Mohammad

This dissertation develops rapid and accurate building energy simulations based on a building classification that identifies and focuses modeling efforts on most significant heat transfer processes. The building classification identifies energy use patterns and their contributing parameters for a portfolio of buildings. The dissertation hypothesis is "Building classification can provide minimal required inputs for rapid and accurate energy simulations for a large number of buildings". The critical literature review indicated there is lack of studies to (1) Consider synoptic point of view rather than the case study approach, (2) Analyze influence of different granularities of energy use, (3) Identify key variables based on the heat transfer processes, and (4) Automate the procedure to quantify model complexity with accuracy. Therefore, three dissertation objectives are designed to test out the dissertation hypothesis: (1) Develop different classes of buildings based on their energy use patterns, (2) Develop different building energy simulation approaches for the identified classes of buildings to quantify tradeoffs between model accuracy and complexity, (3) Demonstrate building simulation approaches for case studies. Penn State's and Harvard's campus buildings as well as high performance LEED NC office buildings are test beds for this study to develop different classes of buildings. The campus buildings include detailed chilled water, electricity, and steam data, enabling to classify buildings into externally-load, internally-load, or mixed-load dominated. The energy use of the internally-load buildings is primarily a function of the internal loads and their schedules. Externally-load dominated buildings tend to have an energy use pattern that is a function of building construction materials and outdoor weather conditions. However, most of the commercial medium-sized office buildings have a mixed-load pattern, meaning the HVAC system and operation schedule dictate the indoor condition regardless of the contribution of internal and external loads. To deploy the methodology to another portfolio of buildings, simulated LEED NC office buildings are selected. The advantage of this approach is to isolate energy performance due to inherent building characteristics and location, rather than operational and maintenance factors that can contribute to significant variation in building energy use. A framework for detailed building energy databases with annual energy end-uses is developed to select variables and omit outliers. The results show that the high performance office buildings are internally-load dominated with existence of three different clusters of low-intensity, medium-intensity, and high-intensity energy use pattern for the reviewed office buildings. Low-intensity cluster buildings benefit from small building area, while the medium- and high-intensity clusters have a similar range of floor areas and different energy use intensities. Half of the energy use in the low-intensity buildings is associated with the internal loads, such as lighting and plug loads, indicating that there are opportunities to save energy by using lighting or plug load management systems. A comparison between the frameworks developed for the campus buildings and LEED NC office buildings indicates these two frameworks are complementary to each other. Availability of the information has yielded to two different procedures, suggesting future studies for a portfolio of buildings such as city benchmarking and disclosure ordinance should collect and disclose minimal required inputs suggested by this study with the minimum level of monthly energy consumption granularity. This dissertation developed automated methods using the OpenStudio API (Application Programing Interface) to create energy models based on the building class. ASHRAE Guideline 14 defines well-accepted criteria to measure accuracy of energy simulations; however, there is no well-accepted methodology to quantify the model complexity without the influence of the energy modeler judgment about the model complexity. This study developed a novel method using two weighting factors, including weighting factors based on (1) computational time and (2) easiness of on-site data collection, to measure complexity of the energy models. Therefore, this dissertation enables measurement of both model complexity and accuracy as well as assessment of the inherent tradeoffs between energy simulation model complexity and accuracy. The results of this methodology suggest for most of the internal load contributors such as operation schedules the on-site data collection adds more complexity to the model compared to the computational time. Overall, this study provided specific data on tradeoffs between accuracy and model complexity that points to critical inputs for different building classes, rather than an increase in the volume and detail of model inputs as the current research and consulting practice indicates. (Abstract shortened by UMI.).

Assessment of Simulated Ground Motions in Earthquake Engineering Practice: A Case Study for Duzce (Turkey)

NASA Astrophysics Data System (ADS)

Karimzadeh, Shaghayegh; Askan, Aysegul; Yakut, Ahmet

2017-09-01

Simulated ground motions can be used in structural and earthquake engineering practice as an alternative to or to augment the real ground motion data sets. Common engineering applications of simulated motions are linear and nonlinear time history analyses of building structures, where full acceleration records are necessary. Before using simulated ground motions in such applications, it is important to assess those in terms of their frequency and amplitude content as well as their match with the corresponding real records. In this study, a framework is outlined for assessment of simulated ground motions in terms of their use in structural engineering. Misfit criteria are determined for both ground motion parameters and structural response by comparing the simulated values against the corresponding real values. For this purpose, as a case study, the 12 November 1999 Duzce earthquake is simulated using stochastic finite-fault methodology. Simulated records are employed for time history analyses of frame models of typical residential buildings. Next, the relationships between ground motion misfits and structural response misfits are studied. Results show that the seismological misfits around the fundamental period of selected buildings determine the accuracy of the simulated responses in terms of their agreement with the observed responses.

Mental models of a water management system in a green building.

PubMed

Kalantzis, Anastasia; Thatcher, Andrew; Sheridan, Craig

2016-11-01

This intergroup case study compared users' mental models with an expert design model of a water management system in a green building. The system incorporates a constructed wetland component and a rainwater collection pond that together recycle water for re-use in the building and its surroundings. The sample consisted of five building occupants and the cleaner (6 users) and two experts who were involved with the design of the water management system. Users' mental model descriptions and the experts' design model were derived from in-depth interviews combined with self-constructed (and verified) diagrams. Findings from the study suggest that there is considerable variability in the user mental models that could impact the efficient functioning of the water management system. Recommendations for improvements are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

D Visualization of a Timber Frame Historic Building: Partite Usage and its Impact on the Structural System

NASA Astrophysics Data System (ADS)

Günay, S.

2017-08-01

Throughout their lifetime, historic buildings might be altered for different kind of usage for different purposes. If this new function or new usage requires utilization of the building in separate units, this separation might affect the historic building's functionality and structure and as a result its overall condition. Yorguc Pasa Mansion conservation project was prepared as a part of the Middle East Technical University (METU) Master's Program in Documentation and Conservation of Historic Monuments and Sites for the historic Yorguc Pasa Mansion. The mansion is a 19th century Ottoman Period timber frame building in Amasya, a Black Sea Region city in Turkey that has traces from different civilizations such as Hittites, Greeks, Romans and Ottomans. This paper aims to discuss the affects of the partite usage on structural conditions of timber frame buildings with the case study of Amasya Yorguc Pasa Mansion through the 3D visualized structural systems.

Transactive Control of Commercial Buildings for Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hao, He; Corbin, Charles D.; Kalsi, Karanjit

Transactive control is a type of distributed control strategy that uses market mechanism to engage self-interested responsive loads to achieve power balance in the electrical power grid. In this paper, we propose a transactive control approach of commercial building Heating, Ventilation, and Air- Conditioning (HVAC) systems for demand response. We first describe the system models, and identify their model parameters using data collected from Systems Engineering Building (SEB) located on our Pacific Northwest National Laboratory (PNNL) campus. We next present a transactive control market structure for commercial building HVAC system, and describe its agent bidding and market clearing strategies. Severalmore » case studies are performed in a simulation environment using Building Control Virtual Test Bed (BCVTB) and calibrated SEB EnergyPlus model. We show that the proposed transactive control approach is very effective at peak clipping, load shifting, and strategic conservation for commercial building HVAC systems.« less

Environmental Evaluation of Building Materials of 5 Slovak Buildings

NASA Astrophysics Data System (ADS)

Porhincak, Milan; Estokova, Adriana

2013-11-01

Building activity has recently led to the deterioration of environment and has become unsustainable. Several strategies have been introduced in order to minimize consumption of energy and resulting CO2 emissions having their origin in the operational phase. But also other stages of Life Cycle should are important to identify the overall environmental impact of construction sector. In this paper 5 similar Slovak buildings (family houses) were analyzed in terms of environmental performance of building materials used for their structures. Evaluation included the weight of used materials, embodied energy and embodied CO2 and SO2 emissions. Analysis has proven that the selection of building materials is an important factor which influences the environmental profile. Findings of the case study indicated that materials like concrete, ceramic or thermal insulation materials based on polystyrene and mineral wool are ones with the most negative environmental impact.

Smart Grids for Aquifer Thermal Energy Storage (ATES): a case study for the Amsterdam Zuidas district

NASA Astrophysics Data System (ADS)

Jaxa-Rozen, Marc; Bloemendal, Martin; Rostampour, Vahab

2017-04-01

In the context of increasingly strict requirements for building energy efficiency, Aquifer Thermal Energy Storage (ATES) systems have emerged as an effective means to reduce energy demand for space heating and cooling in larger buildings. In the Netherlands, over 2000 systems are currently active, which has already raised issues with spatial planning in some areas; current planning schemes may lack the flexibility to properly address variations in ATES operation, which are driven by uncertainties across a broad range of time scales - from daily changes in building energy demand, to decadal trends for climate or groundwater conditions. This work is therefore part of a broader research effort on ATES Smart Grids (ATES-SG), which has focused on more adaptive methods for ATES management and control. In particular, improved control schemes which allow for coordination between neighboring ATES systems may offer more robust performance under uncertainty (Rostampour & Keviczky, 2016). The case studies for the ATES-SG project have so far focused on idealized cases, and on a historical simulation of ATES development in the city center of Utrecht. This poster will present an additional case study for the city center of Amsterdam, which poses several geohydrological challenges for ATES: for instance, variable density flow due to salinity gradients in the local aquifer, and varying depths for ATES systems due to the thickness of the aquifer. To study the effect of these conditions, this case uses an existing 15-layer geohydrological model of the Amsterdam region, cropped to an area of 4500m x 2500m around the Amsterdam Zuidas district. This rapidly developing business district is one of the densest areas of ATES use in Amsterdam, with 32 well doublets and 53 monowells currently registered. The geohydrological model is integrated with GIS data to accurately represent ATES spatial planning; simulated well flows are provided by a model predictive control component. This model is then simulated for two cases: a baseline decoupled configuration without coordination, and a case in which a subset of adjacent ATES systems is managed centrally to avoid overlaps between stored thermal volumes. Given that the thickness of the local aquifer offers significant potential for further ATES adoption in the area, such a coordinated approach could help maximize the benefits of future ATES development. References Rostampour, V., & Keviczky, T. (2016). Probabilistic Energy Management for Building Climate Comfort in Smart Thermal Grids with Seasonal Storage Systems. Submitted to IFAC World Congress 2017. Available at https://arxiv.org/abs/1611.03206

Getting the Facts, Analyzing the Data, Building the Case for Institutional Distinctiveness.

ERIC Educational Resources Information Center

Ratcliff, James L.

1989-01-01

Suggests sources of data related to the distinctiveness of a community college, including institutional histories, needs assessments, institutional impact studies, marketing research, and strategic planning studies. Considers ways of organizing the data. (DMM)

Assessing high shares of renewable energies in district heating systems - a case study for the city of Herten

NASA Astrophysics Data System (ADS)

Aydemir, Ali; Popovski, Eftim; Bellstädt, Daniel; Fleiter, Tobias; Büchele, Richard

2017-11-01

Many earlier studies have assessed the DH generation mix without taking explicitly into account future changes in the building stock and heat demand. The approach of this study consists of three steps that combine stock modeling, energy demand forecasting, and simulation of different energy technologies. First, a detailed residential building stock model for Herten is constructed by using remote sensing together with a typology for the German building stock. Second, a bottom-up simulation model is used which calculates the thermal energy demand based on energy-related investments in buildings in order to forecast the thermal demand up to 2050. Third, solar thermal fields in combination with large-scale heat pumps are sized as an alternative to the current coal-fired CHPs. We finally assess cost of heat and CO2 reduction for these units for two scenarios which differ with regard to the DH expansion. It can be concluded that up to 2030 and 2050 a substantial reduction in buildings heat demand due to the improved building insulation is expected. The falling heat demand in the DH substantially reduces the economic feasibility of new RES generation capacity. This reduction might be compensated by continuously connecting apartment buildings to the DH network until 2050.

Trust Building as a Strategy to Avoid Unintended Consequences of Education. The Case Study of International Summer Camps Designed to Promote Peace and Intercultural Dialogue among Adolescents

ERIC Educational Resources Information Center

Farini, Federico

2014-01-01

This article aims to offer both a theoretical contribution and examples of practices of trust building in peace education; the article presents an empirical analysis of videotaped interactions in the context of peace education activities in international groups of adolescents. The analysis regards two international summer camps promoted by the…

Dynamic modeling and experiments on the coupled vibrations of building and elevator ropes

NASA Astrophysics Data System (ADS)

Yang, Dong-Ho; Kim, Ki-Young; Kwak, Moon K.; Lee, Seungjun

2017-03-01

This study is concerned with the theoretical modelling and experimental verification of the coupled vibrations of building and elevator ropes. The elevator ropes consist of a main rope which supports the cage and the compensation rope which is connected to the compensation sheave. The elevator rope is a flexible wire with a low damping, so it is prone to vibrations. In the case of a high-rise building, the rope length also increases significantly, so that the fundamental frequency of the elevator rope approaches the fundamental frequency of the building thus increasing the possibility of resonance. In this study, the dynamic model for the analysis of coupled vibrations of building and elevator ropes was derived by using Hamilton's principle, where the cage motion was also considered. An experimental testbed was built to validate the proposed dynamic model. It was found that the experimental results are in good agreement with the theoretical predictions thus validating the proposed dynamic model. The proposed model was then used to predict the vibrations of real building and elevator ropes.

Regional Design Approach in Designing Climatic Responsive Administrative Building in the 21st Century

NASA Astrophysics Data System (ADS)

Haja Bava Mohidin, Hazrina Binti; Ismail, Alice Sabrina

2015-01-01

The objective of this paper is to explicate on the study of modern administrative building in Malaysia which portrays regional design approach that conforms to the local context and climate by reviewing two case studies; Perdana Putra (1999) and former Prime Minister's Office (1967). This paper is significant because the country's stature and political statement was symbolized by administrative building as a national icon. In other words, it is also viewed as a cultural object that is closely tied to a particular social context and nation historical moment. Administrative building, therefore, may exhibit various meanings. This paper uses structuralism paradigm and semiotic principles as a methodological approach. This paper is of importance for practicing architects and society in the future as it offers new knowledge and understanding in identifying the suitable climatic consideration that may reflect regionalist design approach in modern administrative building. These elements then may be adopted in designing public buildings in the future with regional values that are important for expressing national culture to symbolize the identity of place and society as well as responsive to climate change.

Building midwifery educator capacity using international partnerships: Findings from a qualitative study.

PubMed

West, Florence; Dawson, Angela; Homer, Caroline S E

2017-07-01

Midwifery educators play a critical role in strengthening the midwifery workforce globally, including in low and lower-middle income countries (LMIC) to ensure that midwives are adequately prepared to deliver quality midwifery care. The most effective approach to building midwifery educator capacity is not always clear. The aim of this study was to determine how one capacity building approach in Papua New Guinea (PNG) used international partnerships to improve teaching and learning. A qualitative exploratory case study design was used to explore the perspectives of 26 midwifery educators working in midwifery education institutions in PNG. Seven themes were identified which provide insights into the factors that enable and constrain midwifery educator capacity building. The study provides insights into strategies which may aid institutions and individuals better plan and implement international midwifery partnerships to strengthen context-specific knowledge and skills in teaching. Further research is necessary to assess how these findings can be transferred to other contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Preventing fatalities in building bombings: what can we learn from the Oklahoma City bombing?

PubMed

Glenshaw, Mary T; Vernick, Jon S; Li, Guohua; Sorock, Gary S; Brown, Sheryll; Mallonee, Sue

2007-07-01

Bombings are an increasing threat to the public's health. Descriptive studies of blast injuries have been published, but these injuries have not been studied using analytical epidemiological methods. This study assesses factors associated with fatality risk among individuals exposed to the 1995 Oklahoma City bombing. Retrospective case-control analysis using multivariable logistic regression. Odds ratios (OR) of fatality are calculated among occupants of the Alfred P. Murrah Federal Building on April 19, 1995. Of the 348 occupants exposed, 163 (46.8%) were fatally injured. Fatality risk was greatest in the collapsed region of the building (adjusted OR 176.7, 95% confidence interval [CI] 65.9-474.2). Age > or =40 was also associated with a significantly increased risk of fatality (OR 3.7, 95% CI 1.4-9.8). Among people found in the noncollapsed region of the building, employees' status compared to a visitor's or child's status was protective (OR 0.13, 95% CI 0.01-1.3). Structural collapse is the most important risk factor for fatality in a building bombing. Progressive collapse may be prevented through more supportive building design. Protection of vulnerable building occupants can be improved by placement of relevant facilities in more structurally reinforced areas. Regular evacuation training of personnel and clear egress routes may also reduce fatality in a building bombing.

Building a Better Workforce: A Case Study in Management Simulations and Experiential Learning in the Construction Industry

ERIC Educational Resources Information Center

Douglas-Lenders, Rachel Claire; Holland, Peter Jeffrey; Allen, Belinda

2017-01-01

Purpose: The purpose of this paper is to examine the impact of experiential simulation-based learning of employee self-efficacy. Design/Methodology/Approach: The research approach is an exploratory case study of a group of trainees from the same organisation. Using a quasi-experiment, one group, pre-test-post-test design (Tharenou et al., 2007), a…

Use of Anthropomorphic Brand Mascots for Student Motivation and Engagement: A Promotional Case Study with Pablo the Penguin at the University of Portsmouth Library

ERIC Educational Resources Information Center

Bennett, David E.; Thompson, Paula

2016-01-01

A case study demonstrating how an online narrative featuring the adventures of a cuddly toy penguin, Pablo Penguin (@uoppenguin on Twitter) has been introduced at the University of Portsmouth Library to build trust and engagement between university students and library services and facilities. Evidence for the benefits of anthropomorphic brand…

Connecting Marketing and Implementation Research and Library Program Development: A Case Study of the Implementation of [U.S.] National Guidelines and Standards.

ERIC Educational Resources Information Center

Haycock, Ken; Cavill, Pat

This case study examined: (1) what market research is required for planning for the implementation of "Information Power: Building Partnerships for Learning," the 1998 national guidelines for effective school library media programs; (2) what issues need to be addressed and what target audiences are required to effect change, as well as…

Building a Better Workforce: A Case Study in Management Simulations and Experiential Learning in the Construction Industry

ERIC Educational Resources Information Center

Douglas-Lenders, Rachel Claire; Holland, Peter Jeffrey; Allen, Belinda

2017-01-01

Purpose: The purpose of this paper is to examine the impact of experiential simulation-based learning of employee self-efficacy. Design/Methodology/Approach: The research approach is an exploratory case study of a group of trainees from the same organisation. Using a quasi-experiment, one group, pre-test-post-test design (Tharenou et al., 2007), a…

Building Better Beginnings: A Case Study of How a Daily Physical Skills Session Is Supporting Overall Learning and Development for Young Boys

ERIC Educational Resources Information Center

Chalke, Joy

2016-01-01

This case study argues for the consideration of an adult-directed physical skills session as an approach to supporting boys learning in the Early Years Foundation Stage in England. It exemplifies a model of professional development that utilises the individual knowledge and expertise of practitioners to support and extend others' practice. It…

Case Study: An Examination of the Decision Making Process for Selecting Simulations for an Online MBA Program

ERIC Educational Resources Information Center

Neely, Pat; Tucker, Jan

2013-01-01

Purpose: Simulations are designed as activities which imitate real world scenarios and are often used to teach and enhance skill building. The purpose of this case study is to examine the decision making process and outcomes of a faculty committee tasked with examining simulations in the marketplace to determine if the simulations could be used as…

"Beyond the Four Walls of My Building": A Case Study of #Edchat as a Community of Practice

ERIC Educational Resources Information Center

Britt, Virginia G.; Paulus, Trena

2016-01-01

Although Twitter and other social media sites have grown in popularity with educators, we still do not know what is happening within this online space or how it supports teachers. The purpose of this case study of #Edchat, a group of educators who meet weekly on Twitter, was to investigate informal professional development through the lens of…

Abriendo Caminos Para La Educacion: A Case Study of a Parent Outreach Initiative Building on the Knowledge, Skills, and Resources of the Latina/o Community

ERIC Educational Resources Information Center

Fernandez, Graciela

2010-01-01

Informed by research studies that demonstrate a positive relationship between parent engagement and student academic attainment, state and national parent outreach initiatives have aimed to bridge the gap between Latina/o parents and schools. Such was the case with the Latina/o Family, School and Community "Avanzando" Project, which…

The Equity Journey: NewSchools Venture Fund and Lumina Foundation Pursue Diversity on the Road to Equity. Principles for Effective Education Grantmaking. Case Study No. 16

ERIC Educational Resources Information Center

Russell, Christina A.

2017-01-01

In this case study, Lumina Foundation and NewSchools Venture Fund, two grantmakers represented on Grantmakers for Education's Equity Impact Group, offer up strategies and learnings on their recent journeys in embedding diversity, equity and inclusion into their organizational cultures, grantmaking practices and field-building efforts. The major…

The Microevolution of Mathematical Knowledge: The Case of Randomness.

ERIC Educational Resources Information Center

Pratt, Dave; Noss, Richard

2002-01-01

Explores the growth of mathematical knowledge and the relationship between abstraction and context. Builds on work to construct a viable model of the micro-evolution of mathematical knowledge in context whose central feature is the visibility of its mechanisms. Illustrates a case study of 10-11-year-old children's construction of meanings for…

Analyzing Historical Primary Source Open Educational Resources: A Blended Pedagogical Approach

ERIC Educational Resources Information Center

Oliver, Kevin M.; Purichia, Heather R.

2018-01-01

This qualitative case study addresses the need for pedagogical approaches to working with open educational resources (OER). Drawing on a mix of historical thinking heuristics and case analysis approaches, a blended pedagogical strategy and primary source database were designed to build student understanding of historical records with transfer of…

Navigating Change with a Flexible Portfolio

ERIC Educational Resources Information Center

Tyksinski, Deborah J.

2009-01-01

This case study demonstrates how building a flexible portfolio of services allowed a continuing education (CE) unit to thrive during frequent leadership changes. The case is set in a small state college, State Technology Institute at Mohawk (STIM), which experienced nine leadership changes in as many years. The names of the institution and its…

Leaders on the Front Line--Managing Emotion for Ethical Decision Making

ERIC Educational Resources Information Center

Tenuto, Penny L.; Gardiner, Mary E.; Yamamoto, Julie K.

2016-01-01

To build capacity for students in educational leadership programs, we developed a teaching case study focused on managing emotion for ethical decision making in supervision of personnel. The case offers troubling encounters between a secondary assistant principal and a novice teacher, a veteran teacher, and a veteran administrator. Scenarios…

Theory and Contrastive Explanation in Ethnography

ERIC Educational Resources Information Center

Lichterman, Paul; Reed, Isaac Ariail

2015-01-01

We propose three interlinked ways that theory helps researchers build causal claims from ethnographic research. First, theory guides the casing and re-casing of a topic of study. Second, theoretical work helps craft a clear causal question via the construction of a contrast space of the topic of investigation. Third, the researcher uses theory to…

Conceptions of Teaching Science Held by Novice Teachers in an Alternative Certification Program

ERIC Educational Resources Information Center

Koballa, Thomas R.; Glynn, Shawn M.; Upson, Leslie

2005-01-01

Case studies to investigate the conceptions of teaching science held by three novice teachers participating in an alternative secondary science teacher certification program were conducted, along with the relationships between their conceptions of science teaching and their science teaching practice. Data used to build the cases included the…

Commercial and Institutional Case Studies

EPA Pesticide Factsheets

Throughout the country, commercial and institutional (CI) building owners and facility managers are taking actions to reduce their water use, implementing many of the operations and maintenance, retrofit, and replacement projects.

A Case Study in Security Sector Reform: Learning from Security Sector Reform/Building in Afghanistan (October 2002-September 2003)

DTIC Science & Technology

2009-11-01

Amb G (Ambassador-Italy)10. Mrs. G (ISAF Political Advisor)11. Amb K (Amb-Japan)12. Mr. K (ISAF PolAd)13. Mrs. M (Chargé-Netherlands)14. Mr. M ...DCM-Japan)15. BG M (Senior Military Advisor-Finland)16. Amb N (Amb-UK)17. Mr. S (DCM-Germany)18. Lt Col S (MilAd-GE)19. Amb T (Donor Asst-U.S...Building, Year One: From Bonn to Kabul.” Antonio Donini , Norah Niland, and Karin Wermester, eds., Nation Building Unraveled, pp. 39-60. Bloomfield, CT

Technology Solutions Case Study: Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The U.S. Department of Energy developed the K-12 Advanced Energy Retrofit Guide to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. We emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluation of the most promising retrofit measure for each building type. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings.

Business Metrics for High-Performance Homes: A Colorado Springs Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, R.; Jones, A.

The building industry needs to understand how energy ratings can impact homebuilders. Of interest is how energy efficiency may or may not have a positive impact on homebuilders’ business success. Focusing on Colorado Springs, Colorado, as a case study, the U.S. Department of Energy’s Building America research team IBACOS suggests a win–win between a builder’s investment in energy efficiency and that builder’s ability to sell homes. Although this research did not ultimately determine why a correlation may exist, a builder’s investment in voluntary energy-efficiency programs correlated with that builder’s ability to survive the Great Recession of 2007 to 2009. Thismore » report explores the relationship between energy-efficiency ratings and the market performance of several builders in Colorado Springs.« less

Building HVAC control knowledge data schema – Towards a unified representation of control system knowledge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yan; Treado, Stephen J.; Messner, John I.

Building control systems for Heating, Ventilation, and Air Conditioning (HVAC) play a key role in realizing the functionality and operation of building systems and components. Building Control Knowledge (BCK) is the logic and algorithms embedded throughout building control system. There are different methods to represent the BCK. These methods differ in the selection of BCK representing elements and the format of those elements. There is a lack of standard data schema, for storing, retrieving, and reusing structured BCK. In this study, a modular data schema is created for BCK representation. The data schema contains eleven representing elements, i.e., control modulemore » name, operation mode, system schematic, control flow diagram, data point, alarm, parameter, control sequence, function, and programming code. Each element is defined with specific attributes. This data schema is evaluated through a case study demonstration. The demonstration shows a new way to represent the BCK with standard formats.« less

Promoting evaluation capacity building in a complex adaptive system.

PubMed

Lawrenz, Frances; Kollmann, Elizabeth Kunz; King, Jean A; Bequette, Marjorie; Pattison, Scott; Nelson, Amy Grack; Cohn, Sarah; Cardiel, Christopher L B; Iacovelli, Stephanie; Eliou, Gayra Ostgaard; Goss, Juli; Causey, Lauren; Sinkey, Anne; Beyer, Marta; Francisco, Melanie

2018-04-10

This study provides results from an NSF funded, four year, case study about evaluation capacity building in a complex adaptive system, the Nanoscale Informal Science Education Network (NISE Net). The results of the Complex Adaptive Systems as a Model for Network Evaluations (CASNET) project indicate that complex adaptive system concepts help to explain evaluation capacity building in a network. The NISE Network was found to be a complex learning system that was supportive of evaluation capacity building through feedback loops that provided for information sharing and interaction. Participants in the system had different levels of and sources of evaluation knowledge. To be successful at building capacity, the system needed to have a balance between both centralized and decentralized control, coherence, redundancy, and diversity. Embeddedness of individuals within the system also provided support and moved the capacity of the system forward. Finally, success depended on attention being paid to the control of resources. Implications of these findings are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Presence of Legionellaceae in warm water supplies and typing of strains by polymerase chain reaction.

PubMed Central

Zietz, B.; Wiese, J.; Brengelmann, F.; Dunkelberg, H.

2001-01-01

Outbreaks of Legionnaire's disease present a public health challenge especially because fatal outcomes still remain frequent. The aim of this study was to describe the abundance and epidemiology of Legionellaceae in the human-made environment. Water was sampled from hot-water taps in private and public buildings across the area of Göttingen, Germany, including distant suburbs. Following isolation, we used polymerase chain reaction in order to generate strain specific banding profiles of legionella isolates. In total, 70 buildings were examined. Of these 18 (26%) had the bacterium in at least one water sample. Legionella pneumophila serogroups 1, 4, 5 and 6 could be identified in the water samples. Most of the buildings were colonized solely by one distinct strain, as proven by PCR. In three cases equal patterns were found in separate buildings. There were two buildings in this study where isolates with different serogroups were found at the same time. PMID:11293675

Automatic building information model query generation

DOE PAGES

Jiang, Yufei; Yu, Nan; Ming, Jiang; ...

2015-12-01

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Building surgical capacity in low-resource countries: a qualitative analysis of task shifting from surgeon volunteers' perspectives.

PubMed

Aliu, Oluseyi; Corlew, Scott D; Heisler, Michele E; Pannucci, Christopher J; Chung, Kevin C

2014-01-01

Surgical volunteer organizations (SVOs) focus considerable resources on addressing the backlog of cases in low-resource countries. This model of service may perpetuate dependency. Efforts should focus on models that establish independence in providing surgical care. Independence could be achieved through surgical capacity building. However, there has been scant discussion in literature on SVO involvement in surgical capacity building. Using qualitative methods, we evaluated the perspectives of surgeons with extensive volunteer experience in low-resource countries. We collected data through in-depth interviews that centered on SVOs using task shifting as a tool for surgical capacity building. Some of the key themes from our analysis include the ethical ramifications of task shifting, the challenges of addressing technical and clinical education in capacity building for low-resource settings, and the allocation of limited volunteer resources toward surgical capacity building. These themes will be the foundation of subsequent studies that will focus on other stakeholders in surgical capacity building including host communities and SVO administrators.

Automatic building information model query generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Yufei; Yu, Nan; Ming, Jiang

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Urban area thermal monitoring: Liepaja case study using satellite and aerial thermal data

NASA Astrophysics Data System (ADS)

Gulbe, Linda; Caune, Vairis; Korats, Gundars

2017-12-01

The aim of this study is to explore large (60 m/pixel) and small scale (individual building level) temperature distribution patterns from thermal remote sensing data and to conclude what kind of information could be extracted from thermal remote sensing on regular basis. Landsat program provides frequent large scale thermal images useful for analysis of city temperature patterns. During the study correlation between temperature patterns and vegetation content based on NDVI and building coverage based on OpenStreetMap data was studied. Landsat based temperature patterns were independent from the season, negatively correlated with vegetation content and positively correlated with building coverage. Small scale analysis included spatial and raster descriptor analysis for polygons corresponding to roofs of individual buildings for evaluating insulation of roofs. Remote sensing and spatial descriptors are poorly related to heat consumption data, however, thermal aerial data median and entropy can help to identify poorly insulated roofs. Automated quantitative roof analysis has high potential for acquiring city wide information about roof insulation, but quality is limited by reference data quality and information on building types, and roof materials would be crucial for further studies.

Summer indoor heat exposure and respiratory and cardiovascular distress calls in New York City, NY, U.S

PubMed Central

Uejio, C. K.; Tamerius, J. D.; Vredenburg, J.; Asaeda, G.; Isaacs, D. A.; Braun, J.; Quinn, A.; Freese, J. P.

2016-01-01

Most extreme heat studies relate outdoor weather conditions to human morbidity and mortality. In developed nations, individuals spend ~90% of their time indoors. This pilot study investigated the indoor environments of people receiving emergency medical care in New York City, NY, U.S., from July to August 2013. The first objective was to determine the relative influence of outdoor conditions as well as patient characteristics and neighborhood sociodemographics on indoor temperature and specific humidity (N = 764). The second objective was to determine whether cardiovascular or respiratory cases experience hotter and more humid indoor conditions as compared to controls. Paramedics carried portable sensors into buildings where patients received care to passively monitor indoor temperature and humidity. The case–control study compared 338 respiratory cases, 291 cardiovascular cases, and 471 controls. Intuitively, warmer and sunnier outdoor conditions increased indoor temperatures. Older patients who received emergency care tended to occupy warmer buildings. Indoor-specific humidity levels quickly adjusted to outdoor conditions. Indoor heat and humidity exposure above a 26 °C threshold increased (OR: 1.63, 95% CI: 0.98–2.68, P = 0.056), but not significantly, the proportion of respiratory cases. Indoor heat exposures were similar between cardiovascular cases and controls. PMID:26086869

Commercializing Government-sponsored Innovations: Twelve Successful Buildings Case Studies

DOE R&D Accomplishments Database

Brown, M. A.; Berry, L. G.; Goel, R. K.

1989-01-01

This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies.

[Schools, office buildings, leisure settings: diversity of indoor air quality issues. Global review on indoor air quality in these settings].

PubMed

Mandin, C; Derbez, M; Kirchner, S

2012-07-01

This review provides a global overview of indoor air quality issues in schools, office buildings and recreational settings. It presents the most recent scientific publications and the on-going work conducted in France in the frame of the indoor air quality Observatory. Monitoring campaigns on indoor air quality in schools have been carried out in the recent years in Europe. However, few studies have specifically addressed the role of exposure in these buildings on children's health. Indoor air quality in office buildings has been little studied so far. However, some specificities, such as emissions from electronic devices, frequent cleaning, impossibility to open windows in high-rise buildings, for example, should be examined and their role on the health and comfort studied. Finally, even if the time spent in recreational settings is short, the quality of indoor air should also be considered because of specific pollution. This is the case of indoor swimming pools (exposure to chlorination byproducts) and ice-rinks (exposure to exhaust from machines used to smooth the ice). Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Behavioral Change and Building Performance: Strategies for Significant, Persistent, and Measurable Institutional Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolfe, Amy K.; Malone, Elizabeth L.; Heerwagen, Judith H.

2014-04-01

The people who use Federal buildings — Federal employees, operations and maintenance staff, and the general public — can significantly impact a building’s environmental performance and the consumption of energy, water, and materials. Many factors influence building occupants’ use of resources (use behaviors) including work process requirements, ability to fulfill agency missions, new and possibly unfamiliar high-efficiency/high-performance building technologies; a lack of understanding, education, and training; inaccessible information or ineffective feedback mechanisms; and cultural norms and institutional rules and requirements, among others. While many strategies have been used to introduce new occupant use behaviors that promote sustainability and reduced resourcemore » consumption, few have been verified in the scientific literature or have properly documented case study results. This paper documents validated strategies that have been shown to encourage new use behaviors that can result in significant, persistent, and measureable reductions in resource consumption. From the peer-reviewed literature, the paper identifies relevant strategies for Federal facilities and commercial buildings that focus on the individual, groups of individuals (e.g., work groups), and institutions — their policies, requirements, and culture. The paper documents methods with evidence of success in changing use behaviors and enabling occupants to effectively interact with new technologies/designs. It also provides a case study of the strategies used at a Federal facility — Fort Carson, Colorado. The paper documents gaps in the current literature and approaches, and provides topics for future research.« less

Coupling fast fluid dynamics and multizone airflow models in Modelica Buildings library to simulate the dynamics of HVAC systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Wei; Sevilla, Thomas Alonso; Zuo, Wangda

Historically, multizone models are widely used in building airflow and energy performance simulations due to their fast computing speed. However, multizone models assume that the air in a room is well mixed, consequently limiting their application. In specific rooms where this assumption fails, the use of computational fluid dynamics (CFD) models may be an alternative option. Previous research has mainly focused on coupling CFD models and multizone models to study airflow in large spaces. While significant, most of these analyses did not consider the coupled simulation of the building airflow with the building's Heating, Ventilation, and Air-Conditioning (HVAC) systems. Thismore » paper tries to fill the gap by integrating the models for HVAC systems with coupled multizone and CFD simulations for airflows, using the Modelica simul ation platform. To improve the computational efficiency, we incorporated a simplified CFD model named fast fluid dynamics (FFD). We first introduce the data synchronization strategy and implementation in Modelica. Then, we verify the implementation using two case studies involving an isothermal and a non-isothermal flow by comparing model simulations to experiment data. Afterward, we study another three cases that are deemed more realistic. This is done by attaching a variable air volume (VAV) terminal box and a VAV system to previous flows to assess the capability of the models in studying the dynamic control of HVAC systems. Finally, we discuss further research needs on the coupled simulation using the models.« less

Pre-Design of Transitional Rural Housing for Syria with Recycled Rubble from Destroyed Buildings

NASA Astrophysics Data System (ADS)

Morishita, Naomi; Haj Ismail, Salah; Cetin, Rukiye

2017-10-01

The scale of destruction caused by seven years of on-going war in Syria has caused mass migration of the Syrian people within and outside of Syria. The situation calls for a means to provide the internally displaced persons (IDPs) within Syria with humane post-war affordable housing that can be quickly and easily built with few resources. Fossil fuel resources are not only scarce because of the war, but are also being used as a valuable commodity to finance the war economy, and thus, housing should minimize consumption of energy for heating and cooling because of the fossil fuel scarcity while providing high thermal comfort to the inhabitants. The housing parameters for the proposed solution are to integrate as much of the local building materials in the Aleppo region as possible using existing regional building traditions. Imported products such as building materials, machinery, equipment, as well as foreign labour and knowhow are to be kept to a minimum while incorporating recycled rubble from destroyed buildings. A comparative study of current disaster relief housing illustrates the appropriateness of each design solution in relation to the above-proposed housing parameters. A detailed analysis of the physical properties of an existing case study building in Dabiq, a town 40 km northeast of Aleppo, outlines the strengths and weaknesses of the building tradition to determine which aspects of the construction may be improved for better thermal comfort and resistance against earthquakes. The simulation results from WUFI Plus show the building behaviour of the case study house. This paper offers a concept for transitional single-family housing for IDPs based upon the adobe tradition in the rural areas of Aleppo. Reducing the heating and cooling loads can also drastically reduce fossil fuel requirements during the construction and operation phases of the single-family homes while maintaining a high level of indoor thermal comfort. Traditional construction techniques can potentially employ more craftspeople combined with manual labour instead of using automated systems. The relative safety of the rural areas can thus be increased, as storage and use of fossil fuels in the villages will be decreased allowing for quicker resettlement with less disruption from war.

Study of building typology of school constructed during the Dutch Colonial Period in Indonesia. Case study of Hoogere Burgerschool (HBS) in Bandung

NASA Astrophysics Data System (ADS)

Sarwo Wibowo, Arif

2018-03-01

Bandung is one of the most important colonial cities in Indonesia. In the early 20th century the capital city of Dutch East-Indies Government planned to move in Bandung. Critical infrastructures were intensively built during that period, such as streets and railways, houses, governmental buildings, train stations, hospitals and educational facilities. Besides the famous campus of Technische Hoogeschool te Bandoeng (ITB), still in the same period, several schools were also constructed. One of the most important schools was Hoogere Burgerschool in Bandung (HBS Bandung), now SMUN 3 and 5, Bandung designed by Charles Prosper Wolff Schoemaker and constructed in 1915. HBS Bandung was the fourth HBS constructed by Dutch East Indies Government, therefore became important and put itself as a reference for the later school buildings in Bandung. This study is analyzing how the architects’ frame of mind in producing this design works. Survey and direct data collecting were used to take the exact embodiment of building design. Usage and functional analysis were also used to match space and other standard used in a school building at that time. This study will give an understanding of building typology of school during the Dutch Colonial Period in Indonesia.

Wind flow in an urban environment.

PubMed

Dutt, A J

1991-10-01

The wind environment at ground leven in built-up areas is influenced by the extremely complex interaction amongst incident wind, mean vertical velocity gradient, turbulence and the shapes, sizes and layouts of building. Random layout of buildings could generate zones of overspeed and vortices in the connecting passage way between buildings, terraces, opensided shelters, courtyards, which could potentially cause unpleasantness, hazard from resuspended particulates, and airborne rain penetration into the buildings. The paper presents the results of two case studies comprising field measurements made within the Kent Ridge Campus, National University of Singapore, using DANTEC 54N10 Multichannel Flow Analyser and Probes. Results are presented in terms of non-dimensional windspeed coefficients. It is concluded that there is significant increase in windspeed due to channel and venturi effects. This information provides useful guidelines for building plans and layouts to the architects and engineers.

Building configuration and seismic design: The architecture of earthquake resistance

NASA Astrophysics Data System (ADS)

Arnold, C.; Reitherman, R.; Whitaker, D.

1981-05-01

The architecture of a building in relation to its ability to withstand earthquakes was determined. Aspects of round motion which are significant to building behavior are discussed. Results of a survey of configuration decisions that affect the performance of buildings with a focus on the architectural aspects of configuration design are provided. Configuration derivation, building type as it relates to seismic design, and seismic design, and seismic issues in the design process are examined. Case studies of the Veterans' Administration Hospital in Loma Linda, California, and the Imperial Hotel in Tokyo, Japan, are presented. The seismic design process is described paying special attention to the configuration issues. The need is stressed for guidelines, codes, and regulations to ensure design solutions that respect and balance the full range of architectural, engineering, and material influences on seismic hazards.

Agents causing occupational asthma in Finland in 1986-2002: cow epithelium bypassed by moulds from moisture-damaged buildings.

PubMed

Piipari, R; Keskinen, H

2005-12-01

Occupational asthma is an avoidable form of asthma. In Finland, the diagnosis of occupational asthma entitles substantial compensation to the employee. The diagnostics are based on symptoms, exposure assessment, allergologic investigations, follow-up of peak expiratory flow (PEF) at work and at home and, in many cases, specific challenge tests. To study the causative agents of occupational asthma in Finland. The causative agents and the numbers of new occupational asthma cases notified to the Finnish Register of Occupational Diseases (FROD) during 1986-2002 are reported. The number of occupational asthma cases increased from 1986 until 1995, after which a downward trend, stabilizing during the last few years, has been observed. The majority of the cases (59%) in the beginning of the period (1986-1990) were associated with agriculture, but the percentage has fallen thereafter (42% of the cases in 1998-2002) along with the fall in the total number of cases. Since 1995, indoor moulds from water-damaged buildings have caused an increasing number of cases and have become the most important causative agents (0.5% cases, in 1986-1990 and 18% of the cases in 1998-2002). Chemicals have caused 10-30% of the cases, a decreasing number since 1990. The most important chemicals causing occupational asthma have been diisocyanates and welding fumes, followed by hairdressing chemicals and formaldehyde. The number of occupational asthma cases in Finland reached its height in the mid-1990s. The decrease in the number of total cases is because of the decrease in agriculture-associated cases, reflecting the number of employees in agriculture-associated occupations, which has greatly decreased since Finland joined the EU in 1995. An epidemic of mould-induced asthma, affecting mostly white-collar employees working in moisture-damaged buildings, has taken place since 1995.

Simulation and visualization of energy-related occupant behavior in office buildings

DOE PAGES

Chen, Yixing; Liang, Xin; Hong, Tianzhen; ...

2017-03-15

In current building performance simulation programs, occupant presence and interactions with building systems are over-simplified and less indicative of real world scenarios, contributing to the discrepancies between simulated and actual energy use in buildings. Simulation results are normally presented using various types of charts. However, using those charts, it is difficult to visualize and communicate the importance of occupants’ behavior to building energy performance. This study introduced a new approach to simulating and visualizing energy-related occupant behavior in office buildings. First, the Occupancy Simulator was used to simulate the occupant presence and movement and generate occupant schedules for each spacemore » as well as for each occupant. Then an occupant behavior functional mockup unit (obFMU) was used to model occupant behavior and analyze their impact on building energy use through co-simulation with EnergyPlus. Finally, an agent-based model built upon AnyLogic was applied to visualize the simulation results of the occupant movement and interactions with building systems, as well as the related energy performance. A case study using a small office building in Miami, FL was presented to demonstrate the process and application of the Occupancy Simulator, the obFMU and EnergyPlus, and the AnyLogic module in simulation and visualization of energy-related occupant behaviors in office buildings. Furthermore, the presented approach provides a new detailed and visual way for policy makers, architects, engineers and building operators to better understand occupant energy behavior and their impact on energy use in buildings, which can improve the design and operation of low energy buildings.« less

Simulation and visualization of energy-related occupant behavior in office buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yixing; Liang, Xin; Hong, Tianzhen

In current building performance simulation programs, occupant presence and interactions with building systems are over-simplified and less indicative of real world scenarios, contributing to the discrepancies between simulated and actual energy use in buildings. Simulation results are normally presented using various types of charts. However, using those charts, it is difficult to visualize and communicate the importance of occupants’ behavior to building energy performance. This study introduced a new approach to simulating and visualizing energy-related occupant behavior in office buildings. First, the Occupancy Simulator was used to simulate the occupant presence and movement and generate occupant schedules for each spacemore » as well as for each occupant. Then an occupant behavior functional mockup unit (obFMU) was used to model occupant behavior and analyze their impact on building energy use through co-simulation with EnergyPlus. Finally, an agent-based model built upon AnyLogic was applied to visualize the simulation results of the occupant movement and interactions with building systems, as well as the related energy performance. A case study using a small office building in Miami, FL was presented to demonstrate the process and application of the Occupancy Simulator, the obFMU and EnergyPlus, and the AnyLogic module in simulation and visualization of energy-related occupant behaviors in office buildings. Furthermore, the presented approach provides a new detailed and visual way for policy makers, architects, engineers and building operators to better understand occupant energy behavior and their impact on energy use in buildings, which can improve the design and operation of low energy buildings.« less

Making the Business Case for Energy Savings Plus Health: Indoor Air Quality Guidelines for School Building Upgrades

EPA Pesticide Factsheets

The Energy Savings Plus Health Guide equips school districts to integrate indoor air quality protections into school energy efficiency retrofits and other building upgrade projects. This page describes the business case for energy savings in schools.

Evaluating the influence of ivy canopy cover on brickwork: A case study from Warnham, West Sussex, UK

NASA Astrophysics Data System (ADS)

Coombes, Martin; Viles, Heather

2014-05-01

Biogeomorphological understanding is becoming increasingly applied in a range of environmental management contexts. The concept of 'bioprotection' is of particular relevance in the built environment. Here, the influence of higher plants on the condition of buildings and building materials, particularly vulnerable historic structures, is of great interest for conservationists and managing authorities tasked with preserving built cultural heritage. Ivy (Hedera spp.) is a widespread and prolific creeping and climbing plant that is commonly found on built structures. Opinion varies as to whether ivy is good or bad for buildings, but there is evidence to suggest it can have both protective and deteriorative influences. Here we present a case study assessment of ivy removal from a brick and mortar wall (c.100 years old) in West Sussex, UK. Using measurements of hardness (Equotip L), moisture (protimeter %WME) and visual inspection we find that the condition of brickwork varied with ivy canopy cover extent, but that this effect was not consistent between different heights on the wall. The roles of ivy in moderating wall moisture dynamics is discussed as a possible contributing factor.

Seismic vulnerability and damage of Italian historical centres: A case study in the Campania region

NASA Astrophysics Data System (ADS)

Formisano, Antonio; Chieffo, Nicola; Fabbrocino, Francesco; Landolfo, Raffaele

2017-07-01

The preservation of masonry buildings typical of Italian historical centres represents a very pressing dilemma founded on recovery need of the urban fabric original character. In the paper, based on a methodology developed by some of the Authors on building aggregates, the seismic vulnerability estimation of some masonry compounds in the heart of the town of San PotitoSannitico (Caserta, Italy) is presented and compared to the results achieved from applying the basic literature method for isolated constructions. Finally, the damage scenario of inspected buildings has been shown by highlighting clearly the influence of different positions of structural units on the damages that masonry aggregates suffer under different grade earthquakes, leading to individuate the most vulnerable buildings.

A new approach to flood vulnerability assessment for historic buildings in England

NASA Astrophysics Data System (ADS)

Stephenson, V.; D'Ayala, D.

2014-05-01

The recent increase in frequency and severity of flooding in the UK has led to a shift in the perception of risk associated with flood hazards. This has extended to the conservation community, and the risks posed to historic structures that suffer from flooding are particularly concerning for those charged with preserving and maintaining such buildings. In order to fully appraise the risks in a manner appropriate to the complex issue of preservation, a new methodology is presented here that studies the nature of the vulnerability of such structures, and places it in the context of risk assessment, accounting for the vulnerable object and the subsequent exposure of that object to flood hazards. The testing of the methodology is carried out using three urban case studies and the results of the survey analysis provide guidance on the development of fragility curves for historic structures exposed to flooding. This occurs through appraisal of vulnerability indicators related to building form, structural and fabric integrity, and preservation of architectural and archaeological values. Key findings of the work include determining the applicability of these indicators to fragility analysis, and the determination of the relative vulnerability of the three case study sites.

The parent-child-therapist alliance: A case study using a strategic approach.

PubMed

Naidu, Thirusha; Behari, Sheethal

2010-06-01

In this paper we present a single case study of a clinical approach that addresses the needs of parents and their children in psychotherapy. The approach begins by addressing the child's and parent's concerns separately at first by establishing strong therapeutic alliances with each, and then proceeds to address the concerns of the parent-child dyad. The basic premise is that the therapeutic alliance is the central element to successful outcomes in psychotherapy. The nature of alliance-building and its associated methods and techniques have been extensively considered for adult therapy. However, there is considerably less written on the therapeutic alliance with children and adolescents in the context of family interventions. We briefly examine some theoretical dimensions and applications of the therapeutic alliance in psychotherapy with children/adolescents and their parents. A three-phase alliance-building psychotherapy strategy, founded on the idea that each therapeutic relationship warrants an effective working alliance, is proposed. The case of a single mother and her adolescent daughter is employed to illustrate the strategy.

Building-integrated photovoltaics: A case study

NASA Astrophysics Data System (ADS)

Kiss, G.; Kinkead, J.; Raman, M.

1995-03-01

In 1992, Kiss Cathcart Anders Architects performed a study for NREL on Building-Integrated Photovoltaics (BIPV) issues as seen from the perspective of the building community. In general, the purpose of the study was to list major issues and potential applications; by it's nature it asked more questions than it answered. This second phase study was to produce quantitative data on the performance of specific BIPV systems. Only roof systems are evaluated. The energy performance, construction cost and simple payback for five different BIPV roof options are evaluated in six different locations: Oakland, New York, Miami, Phoenix, Chicago, and Cincinnati. The roof options evaluated include the following: single-glazed PV roof using glass-substrate PVs; double-glazed PV roof with insulating PV modules; ballasted roof-mounted system; sawtooth light monitor roof with indirect north daylighting; sawtooth roof with north light and active heat recovery.

24 CFR 58.35 - Categorical exclusions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... use is not changed, and the footprint of the building is not increased in a floodplain or in a wetland..., reconstruction, or rehabilitation of public facilities and improvements (other than buildings) when the...) Rehabilitation of buildings and improvements when the following conditions are met: (i) In the case of a building...

A fuzzy-ontology-oriented case-based reasoning framework for semantic diabetes diagnosis.

PubMed

El-Sappagh, Shaker; Elmogy, Mohammed; Riad, A M

2015-11-01

Case-based reasoning (CBR) is a problem-solving paradigm that uses past knowledge to interpret or solve new problems. It is suitable for experience-based and theory-less problems. Building a semantically intelligent CBR that mimic the expert thinking can solve many problems especially medical ones. Knowledge-intensive CBR using formal ontologies is an evolvement of this paradigm. Ontologies can be used for case representation and storage, and it can be used as a background knowledge. Using standard medical ontologies, such as SNOMED CT, enhances the interoperability and integration with the health care systems. Moreover, utilizing vague or imprecise knowledge further improves the CBR semantic effectiveness. This paper proposes a fuzzy ontology-based CBR framework. It proposes a fuzzy case-base OWL2 ontology, and a fuzzy semantic retrieval algorithm that handles many feature types. This framework is implemented and tested on the diabetes diagnosis problem. The fuzzy ontology is populated with 60 real diabetic cases. The effectiveness of the proposed approach is illustrated with a set of experiments and case studies. The resulting system can answer complex medical queries related to semantic understanding of medical concepts and handling of vague terms. The resulting fuzzy case-base ontology has 63 concepts, 54 (fuzzy) object properties, 138 (fuzzy) datatype properties, 105 fuzzy datatypes, and 2640 instances. The system achieves an accuracy of 97.67%. We compare our framework with existing CBR systems and a set of five machine-learning classifiers; our system outperforms all of these systems. Building an integrated CBR system can improve its performance. Representing CBR knowledge using the fuzzy ontology and building a case retrieval algorithm that treats different features differently improves the accuracy of the resulting systems. Copyright © 2015 Elsevier B.V. All rights reserved.

Aspinall Courthouse: GSA's Historic Preservation and Net-Zero Renovation Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, R.; Hayter, S.; Hotchkiss, E.

2014-10-01

The federal government is mandated with improving efficiency of buildings, incorporating renewable energy, and achieving net-zero energy operations where possible. These challenges led GSA to consider aligning historic preservation renovations with net-zero energy goals. The Wayne N. Aspinall Federal Building and U.S. Courthouse (Aspinall Courthouse), in Grand Junction, Colorado, is an example of a renovation project that aimed to accomplish both historic preservation and net-zero energy goals.

Building America Case Study: Standard- Versus High-Velocity Air Distribution in High-Performance Townhomes, Denver, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. Poerschke, R. Beach, T. Begg

IBACOS investigated the performance of a small-diameter high-velocity heat pump system compared to a conventional system in a new construction triplex townhouse. A ductless heat pump system also was installed for comparison, but the homebuyer backed out because of aesthetic concerns about that system. In total, two buildings, having identical solar orientation and comprised of six townhomes, were monitored for comfort and energy performance.

Year One Report on the Campaign for Better Schools: Building a Coalition, Gaining Recognition and Forging a Platform to Influence the Terms of the Mayoral Control Debate in NYC, May 2008-May 2009

ERIC Educational Resources Information Center

Gold, Eva; Simon, Elaine; Evans, Shani Adia; Kay, Joseph; Henig, Jeffrey; Silander, Megan

2009-01-01

This is the second evaluation of the Donors' Education Collaborative's (DEC) grant making since its founding in 1995. The first evaluation was a cross-case study of three projects that embodied DEC's theory of action: lasting systemic school reform demands sustained funding to build organizational collaboration that simultaneously broadens and…

New Carrollton Federal Building Lighting Retrofit Captures Cool Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-01-01

Case study describes how the U.S. General Services Administration cut a $291,000 annual lighting electric bill to an estimated $53,500 by upgrading their fluorescent lighting to a new LED troffer lighting and controls system in the New Carrollton Federal Building in Lanham, Maryland. The lighting project yielded an 82% reduction in energy use and earned GSA two awards for exemplary performance from the Interior Lighting Campaign in 2016.

Building Portals for Evidence-Informed Education: Lessons from the Dead. A Case Study of the Development of a National Portal Intended to Enhance Evidence Informed Professionalism in Education

ERIC Educational Resources Information Center

Blamires, Mike

2015-01-01

Access to high-quality evidence has been cited as central to the enhancement of teacher professionalism. This is not a given and teacher access to high-quality evidence requires significant planning and effort. This paper considers the creation of quality-assured reviews to build sustainable quality-assured evidence sources that inform the…

Recommendations for Safe Separation Distances from the Kennedy Space Center (KSC) Vehicle Assembly Building (VAB) Using a Heat-Flux-Based Analytical Approach (Abridged)

NASA Technical Reports Server (NTRS)

Cragg, Clinton H.; Bowman, Howard; Wilson, John E.

2011-01-01

The NASA Engineering and Safety Center (NESC) was requested to provide computational modeling to support the establishment of a safe separation distance surrounding the Kennedy Space Center (KSC) Vehicle Assembly Building (VAB). The two major objectives of the study were 1) establish a methodology based on thermal flux to determine safe separation distances from the Kennedy Space Center's (KSC's) Vehicle Assembly Building (VAB) with large numbers of solid propellant boosters containing hazard division 1.3 classification propellants, in case of inadvertent ignition; and 2) apply this methodology to the consideration of housing eight 5-segment solid propellant boosters in the VAB. The results of the study are contained in this report.

DOE Zero Energy Ready Home Case Study: Amaris Custom Homes, St.Paul, Minnesota; DOE Zero Energy Ready Home Case Study, Energy Efficiency & Renewable Energy (EERE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-06-01

For this project Amaris worked with U.S. Department of Energy (DOE) team, NorthernSTAR Building America Partnership, to approach zero energy in Minnesota's cold climate using reasonable, cost-effective, and replicable construction materials and practices. The result is a passive solar, super-efficient 3542-ft2 walkout rambler with all the creature comforts.

DOE ZERH Case Study: Heirloom Design Build, Euclid Avenue, Atlanta, GA

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2015-09-01

Case study of a DOE 2015 Housing Innovation Award winning custom home in the mixed-humid climate that got a HERS 50 without PV, with 2x6 16” on center walls with R-19 ocsf; basement with R-28 ccsf, R-5 rigid foam under slab; sealed attic with R-28 ocsf under roof deck; 22.8 SEER; 12.5 HSPF heat pump.

Barriers to Student Mobilization and Service at Institutions of Higher Education: A Greenbuilding Initiative Case Study on a Historic, Urban Campus in Charleston, South Carolina, USA

ERIC Educational Resources Information Center

Zimmerman, Katherine S.; Halfacre-Hitchcock, Angela

2006-01-01

Purpose: To identify some of the barriers to mobilizing students of higher education in sustainable initiatives, in order to enhance project success on campuses. Design/methodology/approach: Uses a case study of a model green building retrofit on the College of Charleston campus in Charleston, South Carolina, USA. Several constraints already…

Regional ITS architecture development : a case study : Southern California ITS priority corridor : building a framework for regional ITS integration

DOT National Transportation Integrated Search

1999-09-01

This is one of seven studies exploring processes for developing Intelligent Transportation Systems (ITS) architectures for regional, statewide, or commercial vehicle applications. This study was prepared for a broad-based, non-technical audience. The...

Statewide ITS architecture development : a case study : Arizona's rural statewide ITS architecture : building a framework for statewide ITS integration

DOT National Transportation Integrated Search

1999-09-01

This is one of seven studies exploring processes for developing Intelligent Transportation Systems (ITS) architectures for regional, statewide, or commercial vehicle applications. This study was prepared for a broad-based, non-technical audience. In ...

Risk assessment as standard work in design.

PubMed

Morrill, Patricia W

2013-01-01

This case study article examines a formal risk assessment as part of the decision making process for design solutions in high risk areas. The overview of the Failure Modes and Effects Analysis (FMEA) tool with examples of its application in hospital building projects will demonstrate the benefit of those structured conversations. This article illustrates how two hospitals used FMEA when integrating operational processes with building projects: (1) adjacency decision for Intensive Care Unit (ICU); and (2) distance concern for handling of specimens from Surgery to Lab. Both case studies involved interviews that exposed facility solution concerns. Just-in-time studies using the FMEA followed the same risk assessment process with the same workshop facilitator involving structured conversations in analyzing risks. In both cases, participants uncovered key areas of risk enabling them to take the necessary next steps. While the focus of this article is not the actual design solution, it is apparent that the risk assessment brought clarity to the situations resulting in prompt decision making about facility solutions. Hospitals are inherently risky environments; therefore, use of the formal risk assessment process, FMEA, is an opportunity for design professionals to apply more rigor to design decision making when facility solutions impact operations in high risk areas. Case study, decision making, hospital, infection control, strategy, work environment.

A participatory approach to evaluating a national training and institutional change initiative: the BUILD longitudinal evaluation.

PubMed

Davidson, Pamela L; Maccalla, Nicole M G; Afifi, Abdelmonem A; Guerrero, Lourdes; Nakazono, Terry T; Zhong, Shujin; Wallace, Steven P

2017-01-01

The National Institutes of Health (NIH) funds training programs to increase the numbers and skills of scientists who obtain NIH research grants, but few programs have been rigorously evaluated. The sizeable recent NIH investment in developing programs to increase the diversity of the NIH-funded workforce, implemented through the Diversity Program Consortium (DPC), is unusual in that it also funds a Consortium-wide evaluation plan, which spans the activities of the 10 BUilding Infrastructure Leading to Diversity (BUILD) awardees and the National Research Mentoring Network (NRMN). The purpose of this article is to describe the evaluation design and innovations of the BUILD Program on students, faculty, and institutions of the 10 primarily undergraduate BUILD sites. Our approach to this multi-methods quasi-experimental longitudinal evaluation emphasizes stakeholder participation and collaboration. The evaluation plan specifies the major evaluation questions and key short- to long-term outcome measures (or Hallmarks of Success). The Coordination and Evaluation Center (CEC) embarked on a comprehensive evaluation strategy by developing a set of logic models that incorporate the Hallmarks of Success and other outcomes that were collaboratively identified by the DPC. Data were collected from each BUILD site through national surveys from the Higher Education Research Institute at UCLA (HERI), annual followup surveys that align with the HERI instruments, site visits and case studies, program encounter data ("tracker" data), and institutional data. The analytic approach involves comparing changes in Hallmarks (key outcomes) within institutions for biomedical students who participated versus those who did not participate in the BUILD program at each institution, as well as between institution patterns of biomedical students at the BUILD sites, and matched institutions that were not BUILD grantees. Case studies provide insights into the institutionalization of these new programs and help to explain the processes that lead to the observed outcomes. Ultimately, the results of the consortium-wide evaluation will be used to inform national policy in higher education and will provide relevant examples of institutional and educational programmatic changes required to diversify the biomedical workforce in the USA.

Indoor air quality in green buildings: A case-study in a residential high-rise building in the northeastern United States.

PubMed

Xiong, Youyou; Krogmann, Uta; Mainelis, Gediminas; Rodenburg, Lisa A; Andrews, Clinton J

2015-01-01

Improved indoor air quality (IAQ) is one of the critical components of green building design. Green building tax credit (e.g., New York State Green Building Tax Credit (GBTC)) and certification programs (e.g., Leadership in Energy & Environmental Design (LEED)) require indoor air quality measures and compliance with allowable maximum concentrations of common indoor air pollutants. It is not yet entirely clear whether compliance with these programs results in improved IAQ and ultimately human health. As a case in point, annual indoor air quality measurements were conducted in a residential green high-rise building for five consecutive years by an industrial hygiene contractor to comply with the building's GBTC requirements. The implementation of green design measures resulted in better IAQ compared to data in references of conventional homes for some parameters, but could not be confirmed for others. Relative humidity and carbon dioxide were satisfactory according to existing standards. Formaldehyde levels during four out of five years were below the most recent proposed exposure limits found in the literature. To some degree, particulate matter (PM) levels were lower than that in studies from conventional residential buildings. Concentrations of Volatile Organic Compounds (VOCs) with known permissible exposure limits were below levels known to cause chronic health effects, but their concentrations were inconclusive regarding cancer health effects due to relatively high detection limits. Although measured indoor air parameters met all IAQ maximum allowable concentrations in GBTC and applicable LEED requirements at the time of sampling, we argue that these measurements were not sufficient to assess IAQ comprehensively because more sensitive sampling/analytical methods for PM and VOCs are needed; in addition, there is a need for a formal process to ensure rigor and adequacy of sampling and analysis methods. Also, we suggest that a comprehensive IAQ assessment should include mixed mode thermal comfort models, semi-volatile organic compounds, assessment of new chemicals, and permissible exposure levels of many known indoor VOCs and bioaerosols. Plus, the relationship between energy consumption and IAQ, and tenant education on health effects of indoor pollutants and their sources may need more attention in IAQ investigations in green buildings.

Complex analysis of energy efficiency in operated high-rise residential building: Case study

NASA Astrophysics Data System (ADS)

Korniyenko, Sergey

2018-03-01

Energy conservation and human thermal comfort enhancement in buildings is a topical issue of modern architecture and construction. The innovative solution of this problem makes it possible to enhance building ecological and maintenance safety, to reduce hydrocarbon fuel consumption, and to improve life standard of people. The requirements to increase of energy efficiency in buildings should be provided at all the stages of building's life cycle that is at the stage of design, construction and maintenance of buildings. The research purpose is complex analysis of energy efficiency in operated high-rise residential building. Many actions for building energy efficiency are realized according to the project; mainly it is the effective building envelope and engineering systems. Based on results of measurements the energy indicators of the building during annual period have been calculated. The main reason of increase in heat losses consists in the raised infiltration of external air in the building through a building envelope owing to the increased air permeability of windows and balcony doors (construction defects). Thermorenovation of the building based on ventilating and infiltration heat losses reduction through a building envelope allows reducing annual energy consumption. Energy efficiency assessment based on the total annual energy consumption of building, including energy indices for heating and a ventilation, hot water supply and electricity supply, in comparison with heating is more complete. The account of various components in building energy balance completely corresponds to modern direction of researches on energy conservation and thermal comfort enhancement in buildings.

Assessing Urban Streets Network Vulnerability against Earthquake Using GIS - Case Study: 6TH Zone of Tehran

NASA Astrophysics Data System (ADS)

Rastegar, A.

2017-09-01

Great earthquakes cause huge damages to human life. Street networks vulnerability makes the rescue operation to encounter serious difficulties especially at the first 72 hours after the incident. Today, physical expansion and high density of great cities, due to narrow access roads, large distance from medical care centers and location at areas with high seismic risk, will lead to a perilous and unpredictable situation in case of the earthquake. Zone # 6 of Tehran, with 229,980 population (3.6% of city population) and 20 km2 area (3.2% of city area), is one of the main municipal zones of Tehran (Iran center of statistics, 2006). Major land-uses, like ministries, embassies, universities, general hospitals and medical centers, big financial firms and so on, manifest the high importance of this region on local and national scale. In this paper, by employing indexes such as access to medical centers, street inclusion, building and population density, land-use, PGA and building quality, vulnerability degree of street networks in zone #6 against the earthquake is calculated through overlaying maps and data in combination with IHWP method and GIS. This article concludes that buildings alongside the streets with high population and building density, low building quality, far to rescue centers and high level of inclusion represent high rate of vulnerability, compared with other buildings. Also, by moving on from north to south of the zone, the vulnerability increases. Likewise, highways and streets with substantial width and low building and population density hold little values of vulnerability.

Influence of Courtyard Ventilation on Thermal Performance of Office Building in Hot-Humid Climate: A Case Study

NASA Astrophysics Data System (ADS)

Abbaas, Esra'a. Sh.; Saif, Ala'eddin A.; Munaaim, MAC; Azree Othuman Mydin, Md.

2018-03-01

The influence of courtyard on the thermal performance of Development Department office building in University Malaysia Perlis (UniMAP, Pauh Putra campus) is investigated through simulation study for the effect of ventilation on indoor air temperature and relative humidity of the building. The study is carried out using EnergyPlus simulator interface within OpenStudio and SketchUp plug in software to measure both of air temperature and relative humidity hourly on 21 April 2017 as a design day. The results show that the ventilation through the windows facing the courtyard has sufficient effect on reducing the air temperature compared to the ventilation through external windows since natural ventilation is highly effective on driving the indoor warm air out to courtyard. In addition, the relative humidity is reduced due to ventilation since the courtyard has high ability to remove or dilute indoor airborne pollutants coming from indoor sources. This indicates that the presence of courtyard is highly influential on thermal performance of the building.

Building Regional Networking Capacity through Leadership Development: The Case of Leadership Northwest Missouri

ERIC Educational Resources Information Center

Maltsberger, Beverly; Majee, Wilson

2012-01-01

Through a case study analysis of a regional leadership development program, this article describes the impact on individual and group leadership skills and how the skills are employed to benefit individual communities and the region as a whole. Data were obtained through surveys. Through cooperation and collaboration between and among leadership…

Catholic School Faculty Meetings: A Case Study Linking Catholic Identity, School Improvement, and Teacher Engagement

ERIC Educational Resources Information Center

Hagan, Daryl C.; Houchens, Gary

2016-01-01

While research on faculty meetings is limited, existing literature suggests that meetings could be an arena where schools can address their most pressing challenges (Brandenburg, 2008; Michel, 2011; Riehl, 1998). Building on Macey and Schneider's (2008) Model of Employee Engagement and McGrath's Model of Group Effectiveness (1964), this case study…

Naïve Scientists and Conflict Analysis: Learning through Case Studies

ERIC Educational Resources Information Center

Ayres, R. Williams

2016-01-01

Much of our teaching about conflict relies on theoretical ideas and models that are delivered as finished products. This article explores the supposition that what students need is not already-formed theoretical ideas, but exposure to more real-world cases of conflict from which to build theory. The article presents an experiment in pedagogy:…

Modelling Complex Fenestration Systems using physical and virtual models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thanachareonkit, Anothai; Scartezzini, Jean-Louis

2010-04-15

Physical or virtual models are commonly used to visualize the conceptual ideas of architects, lighting designers and researchers; they are also employed to assess the daylighting performance of buildings, particularly in cases where Complex Fenestration Systems (CFS) are considered. Recent studies have however revealed a general tendency of physical models to over-estimate this performance, compared to those of real buildings; these discrepancies can be attributed to several reasons. In order to identify the main error sources, a series of comparisons in-between a real building (a single office room within a test module) and the corresponding physical and virtual models wasmore » undertaken. The physical model was placed in outdoor conditions, which were strictly identical to those of the real building, as well as underneath a scanning sky simulator. The virtual model simulations were carried out by way of the Radiance program using the GenSky function; an alternative evaluation method, named Partial Daylight Factor method (PDF method), was also employed with the physical model together with sky luminance distributions acquired by a digital sky scanner during the monitoring of the real building. The overall daylighting performance of physical and virtual models were assessed and compared. The causes of discrepancies between the daylighting performance of the real building and the models were analysed. The main identified sources of errors are the reproduction of building details, the CFS modelling and the mocking-up of the geometrical and photometrical properties. To study the impact of these errors on daylighting performance assessment, computer simulation models created using the Radiance program were also used to carry out a sensitivity analysis of modelling errors. The study of the models showed that large discrepancies can occur in daylighting performance assessment. In case of improper mocking-up of the glazing for instance, relative divergences of 25-40% can be found in different room locations, suggesting that more light is entering than actually monitored in the real building. All these discrepancies can however be reduced by making an effort to carefully mock up the geometry and photometry of the real building. A synthesis is presented in this article which can be used as guidelines for daylighting designers to avoid or estimate errors during CFS daylighting performance assessment. (author)« less

A Framework for Text Mining in Scientometric Study: A Case Study in Biomedicine Publications

NASA Astrophysics Data System (ADS)

Silalahi, V. M. M.; Hardiyati, R.; Nadhiroh, I. M.; Handayani, T.; Rahmaida, R.; Amelia, M.

2018-04-01

The data of Indonesians research publications in the domain of biomedicine has been collected to be text mined for the purpose of a scientometric study. The goal is to build a predictive model that provides a classification of research publications on the potency for downstreaming. The model is based on the drug development processes adapted from the literatures. An effort is described to build the conceptual model and the development of a corpus on the research publications in the domain of Indonesian biomedicine. Then an investigation is conducted relating to the problems associated with building a corpus and validating the model. Based on our experience, a framework is proposed to manage the scientometric study based on text mining. Our method shows the effectiveness of conducting a scientometric study based on text mining in order to get a valid classification model. This valid model is mainly supported by the iterative and close interactions with the domain experts starting from identifying the issues, building a conceptual model, to the labelling, validation and results interpretation.

Retail Building Guide for Entrance Energy Efficiency Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stein, J.; Kung, F.

2012-03-01

This booklet is based on the findings of an infiltration analysis for supermarkets and large retail buildings without refrigerated cases. It enables retail building managers and engineers to calculate the energy savings potential for vestibule additions for supermarkets; and bay door operation changes in large retail stores without refrigerated cases. Retail managers can use initial estimates to decide whether to engage vendors or contractors of vestibules for pricing or site-specific analyses, or to decide whether to test bay door operation changes in pilot stores, respectively.

THE COMMAND OF THE TREND: SOCIAL MEDIA AS A WEAPON IN THE INFORMATION AGE

DTIC Science & Technology

2017-06-01

and a bot network) based on the analysis within this case study . Table 3. ISIS Case Study Analysis Propaganda Narratives 1. ISIS is strong...get started with an interview and included me in a cyber think-tank for the study of ISIS activity on social media. Additionally, I am still... study demonstrates how social media is a tool for modern warfare in the information age. The report builds on analysis of three distinct topics

California Multifamily Affordable Solar Housing Program: benefitting both owners and tenants

EPA Pesticide Factsheets

California’s Multifamily Affordable Solar Housing (MASH) program has brought solar energy to thousands of multifamily building owners and tenants across the state. Discover lessons learned through this case study.

Problems of natural lighting for deepened buildings and underground premises under screen effect of high-rise construction

NASA Astrophysics Data System (ADS)

Larionova, Kira; Stetsky, Sergey

2018-03-01

The main rationale and objective of the submitted research work is to create a quality lighting environment in the premises of deepened buildings and below-ground structures under screen effect of high-rise construction (high-rise buildings). It is noted, that in modern megapolises, a deficiency of vacant urban territories leads to the increased density of urban development with increased amount of high-rise construction and tendency to increase efficiency in the use of underground space. The natural lighting of premises in underground buildings and structures is the most efficient way, but it can be implemented only under use of roof lighting system in the form of roof monitors or skylights. In this case the levels of indoor natural lighting will be affected with serious screening effect of high-rise buildings in surrounding development. Such an situation is not regulated, or even considered by the contemporary building Codes and Regulations on natural lighting of interiors. The authors offered a new formula for a daylight factor calculation with roof lighting system in the described cases. The results of theoretical calculations and experimental studies showed very similar values. This proved the truth of the offered formula and elaborated method of calculation on the basis of an offered hypothesis. It prooves, that it is possible to use some factor and guide points in the daylight factors design under system of side natural lighting in the same design for a system of roof lighting.

Using Large-Scale Cooperative Control to Manage Operational Uncertainties for Aquifer Thermal Energy Storage

NASA Astrophysics Data System (ADS)

Jaxa-Rozen, M.; Rostampour, V.; Kwakkel, J. H.; Bloemendal, M.

2017-12-01

Seasonal Aquifer Thermal Energy Storage (ATES) technology can help reduce the demand of energy for heating and cooling in buildings, and has become a popular option for larger buildings in northern Europe. However, the larger-scale deployment of this technology has evidenced some issues of concern for policymakers; in particular, recent research shows that operational uncertainties contribute to inefficient outcomes under current planning methods for ATES. For instance, systems in the Netherlands typically use less than half of their permitted pumping volume on an annual basis. This overcapacity gives users more flexibility to operate their systems in response to the uncertainties which drive building energy demand; these include short-term operational factors such as weather and occupancy, and longer-term, deeply uncertain factors such as changes in climate and aquifer conditions over the lifespan of the buildings. However, as allocated subsurface volume remains unused, this situation limits the adoption of the technology in dense areas. Previous work using coupled agent-based/geohydrological simulation has shown that the cooperative operation of neighbouring ATES systems can support more efficient spatial planning, by dynamically managing thermal interactions in response to uncertain operating conditions. An idealized case study with centralized ATES control thus showed significant improvements in the energy savings which could obtained per unit of allocated subsurface volume, without degrading the recovery performance of systems. This work will extend this cooperative approach for a realistic case study of ATES planning in the city of Utrecht, in the Netherlands. This case was previously simulated under different scenarios for individual ATES operation. The poster will compare these results with a cooperative case under which neighbouring systems can coordinate their operation to manage interactions. Furthermore, a cooperative game-theoretical framework will be used to analyze the theoretical conditions under which cooperation between ATES operators could be assumed to be stable and beneficial, under a range of scenarios for climate trends and ATES adoption pathways.

The importance of ergonomics to sustainability throughout a building's life cycle.

PubMed

Miller, Linda; Dorsey, Julie; Jacobs, Karen

2012-01-01

Protecting and conserving environmental resources is a global concern. Over the past decade, a number of certification processes have emerged to help designers and operators of buildings assess the potential impact of a building on the environment. Certifications such as the Leadership in Energy and Environmental Design (LEED) consider the environmental impact through the lifecycle of a building, but may not be considering the people that construct and utilize it. It is important to remember the human factor. Considering the human factor throughout the lifecycle is crucial to ensure individuals are protected during construction and in operation in the built environment. The paper highlights how ergonomics can be integrated into the life cycle of a building to promote sustainability goals for both the human factor and the environment. A case study approach will be used to illustrate how ergonomics was integrated into a LEED renovation and expanded into its daily operations on a large university campus..

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build..., the STD shall ensure that right-of-way is available prior to the start of physical construction on...

23 CFR 710.313 - Design-build projects.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Design-build projects. 710.313 Section 710.313 Highways... REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build..., the STD shall ensure that right-of-way is available prior to the start of physical construction on...

Public health component in building information modeling

NASA Astrophysics Data System (ADS)

Trufanov, A. I.; Rossodivita, A.; Tikhomirov, A. A.; Berestneva, O. G.; Marukhina, O. V.

2018-05-01

A building information modelling (BIM) conception has established itself as an effective and practical approach to plan, design, construct, and manage buildings and infrastructure. Analysis of the governance literature has shown that the BIM-developed tools do not take fully into account the growing demands from ecology and health fields. In this connection, it is possible to offer an optimal way of adapting such tools to the necessary consideration of the sanitary and hygienic specifications of materials used in construction industry. It is proposed to do it through the introduction of assessments that meet the requirements of national sanitary standards. This approach was demonstrated in the case study of Revit® program.

Interventions to support and develop clinician-researcher leadership in one health district.

PubMed

Fry, Margaret; Dombkins, Anthony

2017-07-10

Purpose Clinical leadership, researcher capacity and a culture of clinical inquiry are needed in the clinical workforce. The purpose of this paper is to report on a program which was used to develop and support clinicians to explore practice, implement innovation, translate evidence and build researcher capacity. Design/methodology/approach This pragmatic paper presents a case study of a nursing and midwifery clinician-researcher development program. The multi-site, multi-modal program focused on education, mentoring and support, communication networks, and clinician-university partnerships strategies to build workforce capacity and leadership. Findings Over 2,000 staff have been involved in the program representing a range of health disciplines. The study day program has been delivered to 500 participants with master classes having over 1,500 attendees. The research mentor program has demonstrated that participants increased their confidence for research leadership roles and are pursuing research and quality assurance projects. Communication strategies improved the visibility of nursing and midwifery. Research limitations/implications This case study was conducted in one health district, which may not have relevance to other geographical areas. The small numbers involved in the research mentor program need to be considered when reviewing the findings. Practical implications The program has been a catalyst for developing a research culture, clinical leadership and research networks that strengthen workforce capacity. Building researcher skills in the workforce will better support quality healthcare and the examination of everyday practice. Social implications Building a culture of healthcare that is based on inquiry and evidence-based practice will lead to more appropriate and consistent healthcare delivery. Consumers have the right to expect health clinicians will challenge everyday practice and have the skills and capability to translate or generate best evidence to underpin professional and service delivery. Originality/value This paper provides strategies for building workforce researcher capacity and capability. The program provides opportunity for building research networks and role modeling the value and importance of research to practice and quality improvement.

Colonization by Legionella spp. of water networks in residential buildings of the Province of Pisa, Italy.

PubMed

Baggiani, A; Casini, B; Totaro, M; Aquino, F; Valentini, P; Bruni, B; Porretta, A; Casalini, F; Miccoli, M; Privitera, G

2015-01-01

Despite the increase of community acquired cases of legionellosis in Italy over the last years, the Italian guidelines do not give indications for prevention and control of Legionella in the hot water networks (or centralized conditioning systems) of residential buildings. We performed a survey on eight medium sized apartment buildings in the Pisa district to assess the prevalence of Legionella spp. in the water network and the respondance to drinking water requisites at the point of use, according to the Italian norms. For each building two hot water and three cold water samples (located at water entrance from the aqueduct network into the building pipework, at the exit from pressure autoclave, and at a remote tap) were collected. Legionella was detected in 20% of residential buildings, mostly in those with a central hot water production system. The study highlights a condition of potential risk for susceptible population subgroups and supports the need for measures of risk assessment and control.

Smart Buildings and Demand Response

NASA Astrophysics Data System (ADS)

Kiliccote, Sila; Piette, Mary Ann; Ghatikar, Girish

2011-11-01

Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems in buildings. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

Effective Team Practices: Interprofessional Contributions to Communication Issues With a Parent's Perspective.

PubMed

Cooper-Duffy, Karena; Eaker, Kerri

2017-05-17

This clinical focus article contains a detailed description of how to build effective teams that use interprofessional collaborative practice (IPCP) with special-education professionals, speech-language pathologists, and families of children with severe disabilities. This clinical focus article provides information on using the essential elements of team building and IPCP to provide quality care to families who have children with severe disabilities. The 6 essential elements for team building are described, with suggestions for including families in each: goal-setting, roles and responsibilities, effective and efficient process, communication and interpersonal relationships, collaborative problem solving, and evaluation. The 4 competency domains of IPCP are embedded into each of the team-building elements to demonstrate how teams can implement IPCP. A case study illustrates the difficulty one parent experienced working with a team across the 6 essential team-building elements when seeking communication services for her child with severe disabilities. Building teams with IPCP can be effective for including families and creating high-quality outcomes for individuals with severe disabilities.

EIA models and capacity building in Viet Nam: an analysis of development aid programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doberstein, Brent

2004-04-01

There has been a decided lack of empirical research examining development aid agencies as 'agents of change' in environmental impact assessment (EIA) systems in developing countries, particularly research examining the model of environmental planning practice promoted by aid agencies as part of capacity building. This paper briefly traces a conceptual framework of EIA, then introduces the concept of 'EIA capacity building'. Using Viet Nam as a case study, the paper then outlines the empirical results of the research, focusing on the extent to which aid agency capacity-building programs promoted a Technical vs. Planning Model of EIA and on the coherencemore » of capacity-building efforts across all aid programs. A discussion follows, where research results are interpreted within the Vietnamese context, and implications of research results are identified for three main groups of actors. The paper concludes by calling for development aid agencies to reconceptualise EIA capacity building as an opportunity to transform developing countries' development planning processes.« less

Joint Real-Time Energy and Demand-Response Management using a Hybrid Coalitional-Noncooperative Game

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Fulin; Gu, Yi; Hao, Jun

In order to model the interactions among utility companies, building demands and renewable energy generators (REGs), a hybrid coalitional-noncooperative game framework has been proposed. We formulate a dynamic non-cooperative game to study the energy dispatch within multiple utility companies, while we take a coalitional perspective on REGs and buildings demands through a hedonic coalition formation game approach. In this case, building demands request different power supply from REGs, then the building demands can be organized into an ultimate coalition structure through a distributed hedonic shift algorithm. At the same time, utility companies can also obtain a stable power generation profile.more » In addition, the interactive progress among the utility companies and building demands which cannot be supplied by REGs is implemented by distributed game theoretic algorithms. Numerical results illustrate that the proposed hybrid coalitional-noncooperative game scheme reduces the cost of both building demands and utility companies compared with the initial scene.« less

Building America Case Study: Quantifying the Financial Benefits of Multifamily Retrofits, Chicago, Illinois

DOE Office of Scientific and Technical Information (OSTI.GOV)

Increasing the adoption of energy efficient building practices will require the energy sector to increase their understanding of the way that retrofits affect multifamily financial performance as well as how those indicators are interpreted by the lending and appraisal industries. This project analyzed building, energy, and financial program data as well as other public and private data to examine the relationship between energy efficiency retrofits and financial performance on three levels: building, city, and community. The project goals were to increase the data and analysis in the growing body of multifamily financial benefits work as well provide a framework formore » other geographies to produce similar characterization. The goals are accomplished through three tasks: Task one: A pre- and post-retrofit analysis of thirteen Chicago multifamily buildings. Task two: A comparison of Chicago income and expenses to two national datasets. Task three: An in-depth look at multifamily market sales data and the subsequent impact of buildings that undergo retrofits.« less

Means of escape provisions and evacuation simulation of public building in Malaysia and Singapore

NASA Astrophysics Data System (ADS)

Samad, Muna Hanim Abdul; Taib, Nooriati; Ying, Choo Siew

2017-10-01

The Uniform Building By-law 1984 of Malaysia is the legal document governing fire safety requirements in buildings. Its prescriptive nature has made the requirements out dated from the viewpoint of current performance based approach in most developed countries. The means of escape provisions is a critical requirement to safeguard occupants' safety in fire especially in public buildings. As stipulated in the UBBL 1984, the means of escape provisions includes sufficient escape routes, travel distance, protection of escape routes, etc. designated as means to allow occupants to escape within a safe period of time. This research aims at investigating the effectiveness of those provisions in public buildings during evacuation process involving massive crowd during emergencies. This research includes a scenario-based study on evacuation processes using two software i.e. PyroSim, a crowd modelling software to conduct smoke study and Pathfinder to stimulate evacuation model of building in Malaysia and Singapore as comparative study. The results show that the buildings used as case study were designed according to Malaysian UBBL 1984 and Singapore Firecode, 2013 respectively provide relative safe means of escape. The simulations of fire and smoke and coupled with simulation of evacuation have demonstrated that although there are adequate exits designated according to fire requirements, the impact of the geometry of atriums on the behavior of fire and smoke have significant effect on escape time especially for unfamiliar user of the premises.

An ontological case base engineering methodology for diabetes management.

PubMed

El-Sappagh, Shaker H; El-Masri, Samir; Elmogy, Mohammed; Riad, A M; Saddik, Basema

2014-08-01

Ontology engineering covers issues related to ontology development and use. In Case Based Reasoning (CBR) system, ontology plays two main roles; the first as case base and the second as domain ontology. However, the ontology engineering literature does not provide adequate guidance on how to build, evaluate, and maintain ontologies. This paper proposes an ontology engineering methodology to generate case bases in the medical domain. It mainly focuses on the research of case representation in the form of ontology to support the case semantic retrieval and enhance all knowledge intensive CBR processes. A case study on diabetes diagnosis case base will be provided to evaluate the proposed methodology.

Building policy capacities: an interactive approach for linking knowledge to action in health promotion.

PubMed

Rütten, Alfred; Gelius, Peter

2014-09-01

This article outlines a theoretical framework for an interactive, research-driven approach to building policy capacities in health promotion. First, it illustrates how two important issues in the recent public health debate, capacity building and linking scientific knowledge to policy action, are connected to each other theoretically. It then introduces an international study on an interactive approach to capacity building in health promotion policy. The approach combines the ADEPT model of policy capacities with a co-operative planning process to foster the exchange of knowledge between policy-makers and researchers, thus improving intra- and inter-organizational capacities. A regional-level physical activity promotion project involving governmental and public-law institutions, NGOs and university researchers serves as a case study to illustrate the potential of the approach for capacity building. Analysis and comparison with a similar local-level project indicate that the approach provides an effective means of linking scientific knowledge to policy action and to planning concrete measures for capacity building in health promotion, but that it requires sufficiently long timelines and adequate resources to achieve adequate implementation and sustainability. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Life Cycle Energy Assessment of a Multi-storey Residential Building

NASA Astrophysics Data System (ADS)

Mehta, Sourabh; Chandur, Arjun; Palaniappan, Sivakumar

2017-06-01

This study presents the findings of life cycle energy assessment of two multi-storey residential buildings. These buildings consist of a total of 60 homes. The usable floor area is 43.14 m2 (463.36 ft2) per home. A detailed estimation of embodied energy is carried out by considering the use of materials during building construction. Major contributors of embodied energy are found to be steel, cement and aluminum. Monthly building operation energy was assessed using a total of 2520 data samples corresponding to 3 years of building operation. Analysis of a base case scenario, with 50 years of service life and average monthly operation energy, indicates that the embodied energy and the operation energy account for 16 and 84% of the life cycle energy respectively. Sensitivity analysis is carried out to study the influence of service life and operation energy on the relative contribution of embodied energy and operation energy. It is found that the embodied energy represents as high as 31% of the life cycle energy depending upon the variation in the operation energy and the service life. Hence, strategies towards sustainable building construction should also focus on reducing the embodied energy in the design and construction phases in addition to operation energy.

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of productionmore » builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.« less

The Style As a Factor of Office Building Concentration Locations in European Cities

NASA Astrophysics Data System (ADS)

Bocian, Anna

2017-03-01

Where should office building concentrations be located in cities? What kind of factors has an influence on its locations? The aim of the research is to examine factors of office locations in cities. Selected office building concentrations in European cities were investigated as case studies. The research method was the spatial decision paradigm. The style, one of the main elements of the paradigm, was selected to answer the research question. The style was defined a composition of existing urban structures. Basic elements of urban composition in selected European cities were examined closely. Research results are conditions of office building concentration locations in European cities in term of urban composition. Such knowledge should be a base of decision-making processe during preparing master plans and city development plans.

Goal-oriented networks and capacity building for natural hazards - examples in the Dresden region

NASA Astrophysics Data System (ADS)

Hutter, G.

2013-04-01

Networks and networking are important to build social capacities for natural hazards. However, up to now, it is an open question which types of networks contribute to capacity building under certain circumstances. The paper focuses on the type of a goal-oriented network. The distinction between goal orientation and goal directedness is used to show the following: goal directedness of networks to build capacities for natural hazards involves intensive and continuous processes of sensemaking (Weick, 1995) to specify the network goal. This process of specifying an initial goal statement is important in small and large networks. The governance form of a lead organization network facilitates goal specification. The paper illustrates these findings through evidence from two case studies conducted in the Dresden region in Germany.

Do Prosecutors Use Interview Instructions or Build Rapport with Child Witnesses?

PubMed

Ahern, Elizabeth C; Stolzenberg, Stacia N; Lyon, Thomas D

2015-08-01

This study examined the quality of interview instructions and rapport-building provided by prosecutors to 168 children aged 5-12 years testifying in child sexual abuse cases, preceding explicit questions about abuse allegations. Prosecutors failed to effectively administer key interview instructions, build rapport, or rely on open-ended narrative producing prompts during this early stage of questioning. Moreover, prosecutors often directed children's attention to the defendant early in the testimony. The productivity of different types of wh- questions varied, with what/how questions focusing on actions being particularly productive. The lack of instructions, poor quality rapport-building, and closed-ended questioning suggest that children may not be adequately prepared during trial to provide lengthy and reliable reports to their full ability. Copyright © 2015 John Wiley & Sons, Ltd.

DEVELOPMENT OF A METHOD TO DESIGN A LOW-CARBON SOCIETY IN SMALL COMMUNITY AND ITS APPLICATION TO PUTRAJAYA, MALAYSIA

NASA Astrophysics Data System (ADS)

Hayashi, Yuri; Simson, Janice. J.; Gomi, Kei; Matsuoka, Yuzuru

In this study, we developed the method to design Low-carbon society for small communities almost without industry, with regarding of costs for countermeasures. Then we applied it to Putrajaya, Malaysia, and estimate Socio-economic indicators, energy demand, CO2 emission in year 2007 and 2025. For countermeasure case in 2025, we set three cases according to their priority; Transport, Renewable energy, Building, and calculated costs for countermeasures also. As a result, it was shown that it is possible to reduce 45% of CO2 emission by 2025 compared to 2007 level. Renewable energy priority case needs the highest cost, and Building and Transport was estimated to be the second and third highest. C-ExSS will help more realistic discussion on the policy and countermeasures for developing low-carbon society based on their costs.

Implementation of Building Information Modeling (BIM) in Construction: A Comparative Case Study

NASA Astrophysics Data System (ADS)

Rowlinson, Steve; Collins, Ronan; Tuuli, Martin M.; Jia, Yunyan

2010-05-01

Building Information Modeling (BIM) approach is increasingly adopted in coordination of construction projects, with a number of parties providing BIM services and software solutions. However, the empirical impact of BIM on construction industry has yet to be investigated. This paper explores the interaction between BIM and the construction industry during its implementation, with a specific focus on the empirical impacts of BIM on the design and construction processes and professional roles during the process. Two cases were selected from recent construction projects coordinated with BIM systems: the Venetian Casino project in Macau and the Cathy Pacific Cargo Terminal project in Hong Kong. The former case illustrates how the conflicts emerged during the design process and procurement were addressed by adopting a BIM approach. The latter demonstrates how the adoption of BIM altered the roles of architect, contractor, and sub-contractors involved in the project. The impacts of BIM were critically reviewed and discussed.