Optimizing the construction of devices to control inaccesible surfaces - case study

NASA Astrophysics Data System (ADS)

Niţu, E. L.; Costea, A.; Iordache, M. D.; Rizea, A. D.; Babă, Al

2017-10-01

The modern concept for the evolution of manufacturing systems requires multi-criteria optimization of technological processes and equipments, prioritizing associated criteria according to their importance. Technological preparation of the manufacturing can be developed, depending on the volume of production, to the limit of favourable economical effects related to the recovery of the costs for the design and execution of the technological equipment. Devices, as subsystems of the technological system, in the general context of modernization and diversification of machines, tools, semi-finished products and drives, are made in a multitude of constructive variants, which in many cases do not allow their identification, study and improvement. This paper presents a case study in which the multi-criteria analysis of some structures, based on a general optimization method, of novelty character, is used in order to determine the optimal construction variant of a control device. The rational construction of the control device confirms that the optimization method and the proposed calculation methods are correct and determine a different system configuration, new features and functions, and a specific method of working to control inaccessible surfaces.

Technology transfer through a network of standard methods and recommended practices - The case of petrochemicals

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.; Karvounis, Sotirios

2012-12-01

Technology transfer may take place in parallel with cooperative action between companies participating in the same organizational scheme or using one another as subcontractor (outsourcing). In this case, cooperation should be realized by means of Standard Methods and Recommended Practices (SRPs) to achieve (i) quality of intermediate/final products according to specifications and (ii) industrial process control as required to guarantee such quality with minimum deviation (corresponding to maximum reliability) from preset mean values of representative quality parameters. This work deals with the design of the network of SRPs needed in each case for successful cooperation, implying also the corresponding technology transfer, effectuated through a methodological framework developed in the form of an algorithmic procedure with 20 activity stages and 8 decision nodes. The functionality of this methodology is proved by presenting the path leading from (and relating) a standard test method for toluene, as petrochemical feedstock in the toluene diisocyanate production, to the (6 generations distance upstream) performance evaluation of industrial process control systems (ie., from ASTM D5606 to BS EN 61003-1:2004 in the SRPs network).

Better cancer biomarker discovery through better study design.

PubMed

Rundle, Andrew; Ahsan, Habibul; Vineis, Paolo

2012-12-01

High-throughput laboratory technologies coupled with sophisticated bioinformatics algorithms have tremendous potential for discovering novel biomarkers, or profiles of biomarkers, that could serve as predictors of disease risk, response to treatment or prognosis. We discuss methodological issues in wedding high-throughput approaches for biomarker discovery with the case-control study designs typically used in biomarker discovery studies, especially focusing on nested case-control designs. We review principles for nested case-control study design in relation to biomarker discovery studies and describe how the efficiency of biomarker discovery can be effected by study design choices. We develop a simulated prostate cancer cohort data set and a series of biomarker discovery case-control studies nested within the cohort to illustrate how study design choices can influence biomarker discovery process. Common elements of nested case-control design, incidence density sampling and matching of controls to cases are not typically factored correctly into biomarker discovery analyses, inducing bias in the discovery process. We illustrate how incidence density sampling and matching of controls to cases reduce the apparent specificity of truly valid biomarkers 'discovered' in a nested case-control study. We also propose and demonstrate a new case-control matching protocol, we call 'antimatching', that improves the efficiency of biomarker discovery studies. For a valid, but as yet undiscovered, biomarker(s) disjunctions between correctly designed epidemiologic studies and the practice of biomarker discovery reduce the likelihood that true biomarker(s) will be discovered and increases the false-positive discovery rate. © 2012 The Authors. European Journal of Clinical Investigation © 2012 Stichting European Society for Clinical Investigation Journal Foundation.

Trusted Autonomy for Space Flight Systems

NASA Technical Reports Server (NTRS)

Freed, Michael; Bonasso, Pete; Ingham, Mitch; Kortenkamp, David; Perix, John

2005-01-01

NASA has long supported research on intelligent control technologies that could allow space systems to operate autonomously or with reduced human supervision. Proposed uses range from automated control of entire space vehicles to mobile robots that assist or substitute for astronauts to vehicle systems such as life support that interact with other systems in complex ways and require constant vigilance. The potential for pervasive use of such technology to extend the kinds of missions that are possible in practice is well understood, as is its potential to radically improve the robustness, safety and productivity of diverse mission systems. Despite its acknowledged potential, intelligent control capabilities are rarely used in space flight systems. Perhaps the most famous example of intelligent control on a spacecraft is the Remote Agent system flown on the Deep Space One mission (1998 - 2001). However, even in this case, the role of the intelligent control element, originally intended to have full control of the spacecraft for the duration of the mission, was reduced to having partial control for a two-week non-critical period. Even this level of mission acceptance was exceptional. In most cases, mission managers consider intelligent control systems an unacceptable source of risk and elect not to fly them. Overall, the technology is not trusted. From the standpoint of those who need to decide whether to incorporate this technology, lack of trust is easy to understand. Intelligent high-level control means allowing software io make decisions that are too complex for conventional software. The decision-making behavior of these systems is often hard to understand and inspect, and thus hard to evaluate. Moreover, such software is typically designed and implemented either as a research product or custom-built for a particular mission. In the former case, software quality is unlikely to be adequate for flight qualification and the functionality provided by the system is likely driven largely by the need to publish innovative work. In the latter case, the mission represents the first use of the system, a risky proposition even for relatively simple software.

Direct and indirect impacts of integrated pest management on pesticide use: a case of rice agriculture in Java, Indonesia.

PubMed

Mariyono, Joko

2008-10-01

Integrated pest management (IPM) technology has been disseminated since 1989 in Indonesia to cut down pesticide use, but the adoption and diffusion of the technology are still debated. This study aims to estimate the models of demand for pesticides and to analyse the impact of IPM technology on pesticide use. Aggregate cross-section time series data from 1990-1998 are used. The results show that IPM technology reduces the use of pesticides by improving the process of rice production, such that pesticides are more efficiently used. In this case, the IPM technology is not a pest control technique. CONCLUSION There is an indication that IPM technology has been adopted by farmers. This is evidence that the IPM programme in Indonesia was successful in this area.

Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology.

PubMed

Tom-Aba, Daniel; Olaleye, Adeniyi; Olayinka, Adebola Tolulope; Nguku, Patrick; Waziri, Ndadilnasiya; Adewuyi, Peter; Adeoye, Olawunmi; Oladele, Saliu; Adeseye, Aderonke; Oguntimehin, Olukayode; Shuaib, Faisal

2015-01-01

The recent outbreak of Ebola Virus Disease (EVD) in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT) in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions.

Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology

PubMed Central

Nguku, Patrick; Waziri, Ndadilnasiya; Adewuyi, Peter; Adeoye, Olawunmi; Adeseye, Aderonke; Oguntimehin, Olukayode; Shuaib, Faisal

2015-01-01

The recent outbreak of Ebola Virus Disease (EVD) in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT) in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions. PMID:26115402

Upgrade of Compressed Air Control System Reduces Energy Costs at Michelin Tire Plant. Office of Industrial Technologies (OIT) BestPractices Project Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2002-01-01

This case study highlights the upgraded compressed air system at a Michelin tire manufacturing plant in Spartanburg, South Carolina. The controls upgrade project enabled multiple compressor operation without blow-off, and significantly reduced energy costs.

Benefits assessment of active control technology and related cockpit technology for rotorcraft

NASA Technical Reports Server (NTRS)

Hampton, B. J.

1982-01-01

Two main-rotor active control concepts, one incorporating multicyclic actuators located just below the swashplate, and the other providing for the actuators and power supplies to be located in the rotating frame are considered. Each design concept is integrated with cockpit controllers and displays appropriate to the actuation concept in each case. The benefits of applying the defined ACT/RCT concepts to rotorcraft are quantified by comparison to the baseline model 412 helicopter. These benefits include, in the case of one active control concept; (1) up to 91% reduction in 4/rev hub shears; (2) a flight safety failure rate of 1.96 x 10 to the 8th power failures per flight-hour; (3) rotating controls/rotor hub drag reduction of 40%; (4) a 9% reduction in control system weight; and (5) vibratory deicing. The related cockpit concept reduces pilot workload for critical mission segments as much as 178% visual and 25% manual.

Color machine vision in industrial process control: case limestone mine

NASA Astrophysics Data System (ADS)

Paernaenen, Pekka H. T.; Lemstrom, Guy F.; Koskinen, Seppo

1994-11-01

An optical sorter technology has been developed to improve profitability of a mine by using color line scan machine vision technology. The new technology adapted longers the expected life time of the limestone mine and improves its efficiency. Also the project has proved that color line scan technology of today can successfully be applied to industrial use in harsh environments.

Online Case-Based Learning Design for Facilitating Classroom Teachers' Development of Technological, Pedagogical, and Content Knowledge

ERIC Educational Resources Information Center

Saltan, Fatih

2017-01-01

The aim of this study is to investigate whether, and if so how, online case-based learning influence pre-service classroom teachers' self-confidence on technological pedagogical content knowledge (TPACK). To achieve the goal, a control group pretest-posttest quasi experimental design was used. Participants of the study consisted of 160 pre-service…

75 FR 22548 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

..., Sections 112(g) and 112(j) AGENCY: Environmental Protection Agency (EPA). ACTION: Extension of public... case-by-case emission limits for major sources of hazardous air pollutants under section 112(j) of the..., when EPA published a proposed rule (75 FR 15655) amending the Section 112(j) rule (40 CFR part 63...

Deployment and use of mobile phone technology for real-time reporting of fever cases and malaria treatment failure in areas of declining malaria transmission in Muheza district north-eastern Tanzania.

PubMed

Francis, Filbert; Ishengoma, Deus S; Mmbando, Bruno P; Rutta, Acleus S M; Malecela, Mwelecele N; Mayala, Benjamin; Lemnge, Martha M; Michael, Edwin

2017-08-01

Early detection of febrile illnesses at community level is essential for improved malaria case management and control. Currently, mobile phone-based technology has been commonly used to collect and transfer health information and services in different settings. This study assessed the applicability of mobile phone-based technology in real-time reporting of fever cases and management of malaria by village health workers (VHWs) in north-eastern Tanzania. The community mobile phone-based disease surveillance and treatment for malaria (ComDSTM) platform, combined with mobile phones and web applications, was developed and implemented in three villages and one dispensary in Muheza district from November 2013 to October 2014. A baseline census was conducted in May 2013. The data were uploaded on a web-based database and updated during follow-up home visits by VHWs. Active and passive case detection (ACD, PCD) of febrile cases were done by VHWs and cases found positive by malaria rapid diagnostic test (RDT) were given the first dose of artemether-lumefantrine (AL) at the dispensary. Each patient was visited at home by VHWs daily for the first 3 days to supervise intake of anti-malarial and on day 7 to monitor the recovery process. The data were captured and transmitted to the database using mobile phones. The baseline population in the three villages was 2934 in 678 households. A total of 1907 febrile cases were recorded by VHWs and 1828 (95.9%) were captured using mobile phones. At the dispensary, 1778 (93.2%) febrile cases were registered and of these, 84.2% were captured through PCD. Positivity rates were 48.2 and 45.8% by RDT and microscopy, respectively. Nine cases had treatment failure reported on day 7 post-treatment and adherence to treatment was 98%. One patient with severe febrile illness was referred to Muheza district hospital. The study showed that mobile phone-based technology can be successfully used by VHWs in surveillance and timely reporting of fever episodes and monitoring of treatment failure in remote areas. Further optimization and scaling-up will be required to utilize the tools for improved malaria case management and drug resistance surveillance.

XPAT: a toolkit to conduct cross-platform association studies with heterogeneous sequencing datasets.

PubMed

Yu, Yao; Hu, Hao; Bohlender, Ryan J; Hu, Fulan; Chen, Jiun-Sheng; Holt, Carson; Fowler, Jerry; Guthery, Stephen L; Scheet, Paul; Hildebrandt, Michelle A T; Yandell, Mark; Huff, Chad D

2018-04-06

High-throughput sequencing data are increasingly being made available to the research community for secondary analyses, providing new opportunities for large-scale association studies. However, heterogeneity in target capture and sequencing technologies often introduce strong technological stratification biases that overwhelm subtle signals of association in studies of complex traits. Here, we introduce the Cross-Platform Association Toolkit, XPAT, which provides a suite of tools designed to support and conduct large-scale association studies with heterogeneous sequencing datasets. XPAT includes tools to support cross-platform aware variant calling, quality control filtering, gene-based association testing and rare variant effect size estimation. To evaluate the performance of XPAT, we conducted case-control association studies for three diseases, including 783 breast cancer cases, 272 ovarian cancer cases, 205 Crohn disease cases and 3507 shared controls (including 1722 females) using sequencing data from multiple sources. XPAT greatly reduced Type I error inflation in the case-control analyses, while replicating many previously identified disease-gene associations. We also show that association tests conducted with XPAT using cross-platform data have comparable performance to tests using matched platform data. XPAT enables new association studies that combine existing sequencing datasets to identify genetic loci associated with common diseases and other complex traits.

Improving Assistive Technology Service by Using 3D Printing: Three Case Studies.

PubMed

Watanabe, Takashi; Hatakeyama, Takuro; Tomiita, Mitsuru

2015-01-01

Assistive technology services are essential for adapting assistive devices to the individual needs of users with disabilities. In this study, we attempted to apply three-dimensional (3D) printing technology to three actual cases, and to study its use, effectiveness, and future applications. We assessed the usefulness of 3D printing technology by categorizing its utilization after reviewing the outcomes of these case studies. In future work, we aim to gather additional case studies and derive information on using 3D printing technology that will enable its effective application in the process of assistive technology services.

The Employment Effects of High-Technology: A Case Study of Machine Vision. Research Report No. 86-19.

ERIC Educational Resources Information Center

Chen, Kan; Stafford, Frank P.

A case study of machine vision was conducted to identify and analyze the employment effects of high technology in general. (Machine vision is the automatic acquisition and analysis of an image to obtain desired information for use in controlling an industrial activity, such as the visual sensor system that gives eyes to a robot.) Machine vision as…

Improvement of mouse controlling in Essential tremor by a tremor filter: A case report.

PubMed

López-Blanco, Roberto; Méndez-Guerrero, Antonio; Velasco, Miguel A

2018-07-15

The interaction with electronic devices is crucial in our technological society. Hand kinetic tremor complicates mouse driving in Essential tremor patients. To solve this issue some technological solutions are available and accessible online. We present a 71-year-old patient with prominent mouse controlling tremor who improved with one of these systems. Copyright © 2018 Elsevier B.V. All rights reserved.

Internet and Information Control: The Case of China.

ERIC Educational Resources Information Center

Xiaoming, Hao; Zhang, Kewen; Yu, Huang

1996-01-01

Examines the potential impact of computer-mediated communication (CMC) on government controls of information in China. Examines the current development of CMC in China; challenges posed by new media technologies to government information control; and the current policy of the Chinese government towards on-line communication and its implications.…

Magnetic bearing turbomachinery case histories and applications for space related equipment

NASA Technical Reports Server (NTRS)

Weise, David A.

1993-01-01

The concept of magnetic levitation is not a new one and can be easily traced back to the 1800's. It is only recently, however, that the congruous technologies of electronic control systems, power electronics, and magnetic materials have begun to merge to make the magnetic suspension device a viable product. A brief overview of an active magnetic bearing technology is provided. Case histories of various turbomachinery in North America presently operating on magnetic bearings are reviewed. Finally, projections are made as to the space related machinery that may be benefited by incorporating magnetic bearings into the equipment design.

Assessing the validity of using serious game technology to analyze physician decision making.

PubMed

Mohan, Deepika; Angus, Derek C; Ricketts, Daniel; Farris, Coreen; Fischhoff, Baruch; Rosengart, Matthew R; Yealy, Donald M; Barnato, Amber E

2014-01-01

Physician non-compliance with clinical practice guidelines remains a critical barrier to high quality care. Serious games (using gaming technology for serious purposes) have emerged as a method of studying physician decision making. However, little is known about their validity. We created a serious game and evaluated its construct validity. We used the decision context of trauma triage in the Emergency Department of non-trauma centers, given widely accepted guidelines that recommend the transfer of severely injured patients to trauma centers. We designed cases with the premise that the representativeness heuristic influences triage (i.e. physicians make transfer decisions based on archetypes of severely injured patients rather than guidelines). We randomized a convenience sample of emergency medicine physicians to a control or cognitive load arm, and compared performance (disposition decisions, number of orders entered, time spent per case). We hypothesized that cognitive load would increase the use of heuristics, increasing the transfer of representative cases and decreasing the transfer of non-representative cases. We recruited 209 physicians, of whom 168 (79%) began and 142 (68%) completed the task. Physicians transferred 31% of severely injured patients during the game, consistent with rates of transfer for severely injured patients in practice. They entered the same average number of orders in both arms (control (C): 10.9 [SD 4.8] vs. cognitive load (CL):10.7 [SD 5.6], p = 0.74), despite spending less time per case in the control arm (C: 9.7 [SD 7.1] vs. CL: 11.7 [SD 6.7] minutes, p<0.01). Physicians were equally likely to transfer representative cases in the two arms (C: 45% vs. CL: 34%, p = 0.20), but were more likely to transfer non-representative cases in the control arm (C: 38% vs. CL: 26%, p = 0.03). We found that physicians made decisions consistent with actual practice, that we could manipulate cognitive load, and that load increased the use of heuristics, as predicted by cognitive theory.

Problems of collaborative work of the automated process control system (APCS) and the its information security and solutions.

NASA Astrophysics Data System (ADS)

Arakelyan, E. K.; Andryushin, A. V.; Mezin, S. V.; Kosoy, A. A.; Kalinina, Ya V.; Khokhlov, I. S.

2017-11-01

The principle of interaction of the specified systems of technological protections by the Automated process control system (APCS) and information safety in case of incorrect execution of the algorithm of technological protection is offered. - checking the correctness of the operation of technological protection in each specific situation using the functional relationship between the monitored parameters. The methodology for assessing the economic feasibility of developing and implementing an information security system.

Approximation of Engine Casing Temperature Constraints for Casing Mounted Electronics

NASA Technical Reports Server (NTRS)

Kratz, Jonathan L.; Culley, Dennis E.; Chapman, Jeffryes W.

2017-01-01

The performance of propulsion engine systems is sensitive to weight and volume considerations. This can severely constrain the configuration and complexity of the control system hardware. Distributed Engine Control technology is a response to these concerns by providing more flexibility in designing the control system, and by extension, more functionality leading to higher performing engine systems. Consequently, there can be a weight benefit to mounting modular electronic hardware on the engine core casing in a high temperature environment. This paper attempts to quantify the in-flight temperature constraints for engine casing mounted electronics. In addition, an attempt is made at studying heat soak back effects. The Commercial Modular Aero Propulsion System Simulation 40k (C-MAPSS40k) software is leveraged with real flight data as the inputs to the simulation. A two-dimensional (2-D) heat transfer model is integrated with the engine simulation to approximate the temperature along the length of the engine casing. This modification to the existing C-MAPSS40k software will provide tools and methodologies to develop a better understanding of the requirements for the embedded electronics hardware in future engine systems. Results of the simulations are presented and their implications on temperature constraints for engine casing mounted electronics is discussed.

Approximation of Engine Casing Temperature Constraints for Casing Mounted Electronics

NASA Technical Reports Server (NTRS)

Kratz, Jonathan; Culley, Dennis; Chapman, Jeffryes

2016-01-01

The performance of propulsion engine systems is sensitive to weight and volume considerations. This can severely constrain the configuration and complexity of the control system hardware. Distributed Engine Control technology is a response to these concerns by providing more flexibility in designing the control system, and by extension, more functionality leading to higher performing engine systems. Consequently, there can be a weight benefit to mounting modular electronic hardware on the engine core casing in a high temperature environment. This paper attempts to quantify the in-flight temperature constraints for engine casing mounted electronics. In addition, an attempt is made at studying heat soak back effects. The Commercial Modular Aero Propulsion System Simulation 40k (C-MAPSS40k) software is leveraged with real flight data as the inputs to the simulation. A two-dimensional (2-D) heat transfer model is integrated with the engine simulation to approximate the temperature along the length of the engine casing. This modification to the existing C-MAPSS40k software will provide tools and methodologies to develop a better understanding of the requirements for the embedded electronics hardware in future engine systems. Results of the simulations are presented and their implications on temperature constraints for engine casing mounted electronics is discussed.

Ebola Virus Disease: Rapid Diagnosis and Timely Case Reporting are Critical to the Early Response for Outbreak Control

PubMed Central

Stamm, Lola V.

2015-01-01

Ebola virus disease (EVD) is a life-threatening zoonosis caused by infection with the Ebola virus. Since the first reported EVD outbreak in the Democratic Republic of the Congo, several small outbreaks have been reported in central Africa with about 2,400 cases occurring between 1976 and 2013. The 2013–2015 EVD outbreak in west Africa is the first documented outbreak in this region and the largest ever with over 27,000 cases and more than 11,000 deaths. Although EVD transmission rates have recently decreased in west Africa, this crisis continues to threaten global health and security, particularly since infected travelers could spread EVD to other resource-limited areas of the world. Because vaccines and drugs are not yet licensed for EVD, outbreak control is dependent on the use of non-pharmaceutical interventions (e.g., infection control practices, isolation of EVD cases, contact tracing with follow-up and quarantine, sanitary burial, health education). However, delays in diagnosing and reporting EVD cases in less accessible rural areas continue to hamper control efforts. New advances in rapid diagnostics for identifying presumptive EVD cases and in mobile-based technologies for communicating critical health-related information should facilitate deployment of an early response to prevent the amplification of sporadic EVD cases into large-scale outbreaks. PMID:26175026

High-pressure jet cutters improve capping operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abel, L.W.; Campbell, P.J.; Bowden, J.R. Sr.

1995-05-08

Advances in abrasive cutting technology have improved the methods for removing damaged equipment and preparing wellheads for capping. This technology, much of which was refined during well control operations in Kuwait in 1991, can improve the safety and efficiency of capping jobs by cutting wellheads or casing quickly and cleanly. The majority of well control jobs involve one of three types of capping operations: capping to a flange, capping by installing a wellhead, or capping to a casing stub. Capping operations are often the first major step in regaining control of the well during blowout intervention. Proper planning of amore » capping operation must take into account the mass flow rate, combustible nature of the flow, well bore geometry, and operations in the post-capping phase of the project. The paper discusses capping vehicles, tree removal, jet cutters, capping to a flange, capping to a stub, swallowing the stub, spin-on technique, capping on fire, stinging, offshore blowouts, firefighting, pollution control, intervention equipment, and rig removal.« less

Meeting the challenges of case management with remote patient monitoring technology.

PubMed

Cherry, J C; Colliflower, S J; Tsiperfal, A

2000-01-01

The article presents an overview of some of the current trends in health care and the challenges faced by nurse case managers who are providing disease management services. It discusses some of the emerging technologies available today for innovative case management. In particular, this article describes a program run by a healthcare system in Sacramento, California that uses an Internet-based technology to enhance their nurse case management model. The article demonstrates how the Health Hero platform enables interactive communication between nurse case managers and their patients, thereby meeting some of the challenges the nurse case managers are faced with in the modern disease-management world.

Signal Analysis of Automotive Engine Spark Ignition System using Case-Based Reasoning (CBR) and Case-based Maintenance (CBM)

NASA Astrophysics Data System (ADS)

Huang, H.; Vong, C. M.; Wong, P. K.

2010-05-01

With the development of modern technology, modern vehicles adopt electronic control system for injection and ignition. In traditional way, whenever there is any malfunctioning in an automotive engine, an automotive mechanic usually performs a diagnosis in the ignition system of the engine to check any exceptional symptoms. In this paper, we present a case-based reasoning (CBR) approach to help solve human diagnosis problem. Nevertheless, one drawback of CBR system is that the case library will be expanded gradually after repeatedly running the system, which may cause inaccuracy and longer time for the CBR retrieval. To tackle this problem, case-based maintenance (CBM) framework is employed so that the case library of the CBR system will be compressed by clustering to produce a set of representative cases. As a result, the performance (in retrieval accuracy and time) of the whole CBR system can be improved.

Effect of Rehabilitation Technology Services on Vocational Rehabilitation Outcomes of Individuals with Multiple Sclerosis

ERIC Educational Resources Information Center

Chiu, Chung-Yi; Tansey, Timothy N.; Chan, Fong; Strauser, David; Frain, Michael P.; Arora, Simran

2015-01-01

Objectives: To examine the effect of rehabilitation technology interventions on the employment or job retention outcomes of individuals with multiple sclerosis (MS) served by the state-federal vocational rehabilitation program using a case-control study design. Participants: Data for this study were extracted from the Rehabilitation Services…

[Application of hepatic segment resection combined with rigid choledochoscope in the treatment of complex hepatolithiasis guided by three-dimensional visualization technology].

PubMed

Xiang, Nan; Fang, Chihua

2015-05-01

To study the value of hepatic segment resection combined with rigid choledochoscope by the three-dimensional (3D) visualization technology in the diagnosis and treatment of complex hepatolithiasis. Enhance computed tomography (CT) data of 46 patients with complex hepatolithiasis who were admitted to the Zhujiang Hospital of the Southern Medical University from July 2010 to June 2014 were collected.All of the CT data were imported into the medical image three-dimensional visualization system (MI-3DVS) for 3D reconstruction and individual 3D types. The optimal scope of liver resection and the remnant liver volume were determined according to the individualized liver segments which were made via the distribution and variation of hepatic vein and portal vein, the distribution of bile duct stones and stricture of the bile duct, which provided guidance for intraoperative hepatic lobectomy and rigid choledochoscope for the remnant calculus lithotripsy. Outcomes of individual 3D types: 10 cases of type I, 11 cases of IIa, 23 cases of IIb, 2 cases of IIc, 19 cases coexisted with history of biliary surgery. The variation of hepatic artery was appeared 6 cases. The variation of portal vein was appeared 8 cases. The remaining liver volume for virtual hepatic lobectomy controlled more than 50%. Eighteen cases underwent left lateral hepatectomy, 8 cases underwent left liver resection, 8 cases underwent right posterior lobe of liver resection, 4 cases underwent the right hepatic resection, 4 cases underwent IV segment liver resection, 2 cases underwent right anterior lobe of liver resection, 2 cases underwent left lateral hepatectomy combined with right posterior lobe of liver resection, 26 cases underwent targeting treatment of rapid choledochoscope and preumatic lithotripsy. The actual surgical procedure was consistent with the preoperative surgical planning. There was no postoperative residual liver ischemia,congestion, liver failure occurred in this study. The intraoperative calculus clearance rate was 91.3% (42/46) because 4 cases of postoperatively residual calculi were not suitable for one stage management due to suppurative cholangitis but removed calculus successfully with rigid choledochoscope through T tube fistula. Hepatic segment resection combined with rigid choledochoscope under the guidance of three-dimensional visualization technology achieves accurate preoperative diagnosis and higher complete stone clearance rate of complicated hepatolithiasis.

Export Controls and Nonproliferation Policy

DTIC Science & Technology

1994-05-01

Export Control Classification Numbers ( ECCNs ). The ECCNs do not correspond one-for-one to single commodity technology, or software items: in some...cases an ECCN covers only a single, narrowly defined item, but in many cases multiple related items fall under the same ECCN . The reason for control of...each ECCN category may be single or multiple (e.g., for both National Security and Nuclear Proliferation) but the reason(s) listed may in fact apply

[Effect of 3D printing technology on pelvic fractures:a Meta-analysis].

PubMed

Zhang, Yu-Dong; Wu, Ren-Yuan; Xie, Ding-Ding; Zhang, Lei; He, Yi; Zhang, Hong

2018-05-25

To evaluate the effect of 3D printing technology applied in the surgical treatment of pelvic fractures through the published literatures by Meta-analysis. The PubMed database, EMCC database, CBM database, CNKI database, VIP database and Wanfang database were searched from the date of database foundation to August 2017 to collect the controlled clinical trials in wich 3D printing technology was applied in preoperative planning of pelvic fracture surgery. The retrieved literatures were screened according to predefined inclusion and exclusion criteria, and quality evaluation were performed. Then, the available data were extracted and analyzed with the RevMan5.3 software. Totally 9 controlled clinical trials including 638 cases were chosen. Among them, 279 cases were assigned to the 3D printing technology group and 359 cases to the conventional group. The Meta-analysis results showed that the operative time[SMD=-2.81, 95%CI(-3.76, -1.85)], intraoperative blood loss[SMD=-3.28, 95%CI(-4.72, -1.85)] and the rate of complication [OR=0.47, 95%CI(0.25, 0.87)] in the 3D printing technology were all lower than those in the conventional group;the excellent and good rate of pelvic fracture reduction[OR=2.09, 95%CI(1.32, 3.30)] and postoperative pelvic functional restoration [OR=1.94, 95%CI(1.15, 3.28) in the 3D printing technology were all superior to those in the conventional group. 3D printing technology applied in the surgical treatment of pelvic fractures has the advantage of shorter operative time, less intraoperative blood loss and lower rate of complication, and can improve the quality of pelvic fracture reduction and the recovery of postoperative pelvic function. Copyright© 2018 by the China Journal of Orthopaedics and Traumatology Press.

Pseudoscience in Instructional Technology: The Case of Learner Control Research.

ERIC Educational Resources Information Center

Reeves, Thomas C.

Scientific research that is conducted without the structure of a supporting scientific paradigm should be labeled pseudoscience in that such research is deceptive or false science. It is argued that much of the research in educational technology is pseudoscience, with the focus on learner control research. Learner control is the design feature of…

The Energy Puzzle Between the United States and China

DTIC Science & Technology

2013-03-01

information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM...development, energy growth and developments in energy technology. It concludes with the best case scenario of the two countries building a trust that...development, energy growth and developments in energy technology. It concludes with the best case scenario of the two countries building a trust that will

Case Study of Apple, Inc. for Business Law Students: How Apple's Business Model Controls Digital Content through Legal and Technological Means

ERIC Educational Resources Information Center

Reder, Margo E. K.

2009-01-01

This article describes a six-week long exercise that incorporates a dynamic learning approach into an e-commerce or Internet technology business law elective course; the exercise pursues an entrepreneurial approach to the use of an appropriate business model by emphasizing the interaction between technology, business, and law. This active learning…

Technology Sound not Technology Bound: The Risks of Over-Reliance on Modern Military Capabilities

DTIC Science & Technology

2009-02-19

OF A DIVISIVE AND DISTRUSTFUL ATMOSPHERE People express emotions, beliefs, and mood through body language, intonation , and subtle... perception of the situation provided by command and control PC is a threat to the tactical commander whose immersion in the situation is far more...accurate. That perception can, in many cases, become the catalyst for the abandonment of decentralized control and in turn lead to a tactical defeat

Case Studies of Action Research in Various Adult Education Settings.

ERIC Educational Resources Information Center

Kuhne, Gary W.; Weirauch, Drucie; Fetterman, David J.; Mearns, Raiana M.; Kalinosky, Kathy; Cegles, Kathleen A.; Ritchey, Linda

1997-01-01

Six case studies illustrate action research in adult education: faculty development in a museum, participation in a church congregation, retention of literacy volunteers in a corrections center, learner participation in a homeless shelter, technology innovation in a university, and infection control in a hospital. (SK)

Linear Parameter Varying Control Synthesis for Actuator Failure, Based on Estimated Parameter

NASA Technical Reports Server (NTRS)

Shin, Jong-Yeob; Wu, N. Eva; Belcastro, Christine

2002-01-01

The design of a linear parameter varying (LPV) controller for an aircraft at actuator failure cases is presented. The controller synthesis for actuator failure cases is formulated into linear matrix inequality (LMI) optimizations based on an estimated failure parameter with pre-defined estimation error bounds. The inherent conservatism of an LPV control synthesis methodology is reduced using a scaling factor on the uncertainty block which represents estimated parameter uncertainties. The fault parameter is estimated using the two-stage Kalman filter. The simulation results of the designed LPV controller for a HiMXT (Highly Maneuverable Aircraft Technology) vehicle with the on-line estimator show that the desired performance and robustness objectives are achieved for actuator failure cases.

Construction of integrated case environments.

PubMed

Losavio, Francisca; Matteo, Alfredo; Pérez, María

2003-01-01

The main goal of Computer-Aided Software Engineering (CASE) technology is to improve the entire software system development process. The CASE approach is not merely a technology; it involves a fundamental change in the process of software development. The tendency of the CASE approach, technically speaking, is the integration of tools that assist in the application of specific methods. In this sense, the environment architecture, which includes the platform and the system's hardware and software, constitutes the base of the CASE environment. The problem of tools integration has been proposed for two decades. Current integration efforts emphasize the interoperability of tools, especially in distributed environments. In this work we use the Brown approach. The environment resulting from the application of this model is called a federative environment, focusing on the fact that this architecture pays special attention to the connections among the components of the environment. This approach is now being used in component-based design. This paper describes a concrete experience in civil engineering and architecture fields, for the construction of an integrated CASE environment. A generic architectural framework based on an intermediary architectural pattern is applied to achieve the integration of the different tools. This intermediary represents the control perspective of the PAC (Presentation-Abstraction-Control) style, which has been implemented as a Mediator pattern and it has been used in the interactive systems domain. In addition, a process is given to construct the integrated CASE.

An economic evaluation of vector control in the age of a dengue vaccine.

PubMed

Fitzpatrick, Christopher; Haines, Alexander; Bangert, Mathieu; Farlow, Andrew; Hemingway, Janet; Velayudhan, Raman

2017-08-01

Dengue is a rapidly emerging vector-borne Neglected Tropical Disease, with a 30-fold increase in the number of cases reported since 1960. The economic cost of the illness is measured in the billions of dollars annually. Environmental change and unplanned urbanization are conspiring to raise the health and economic cost even further beyond the reach of health systems and households. The health-sector response has depended in large part on control of the Aedes aegypti and Ae. albopictus (mosquito) vectors. The cost-effectiveness of the first-ever dengue vaccine remains to be evaluated in the field. In this paper, we examine how it might affect the cost-effectiveness of sustained vector control. We employ a dynamic Markov model of the effects of vector control on dengue in both vectors and humans over a 15-year period, in six countries: Brazil, Columbia, Malaysia, Mexico, the Philippines, and Thailand. We evaluate the cost (direct medical costs and control programme costs) and cost-effectiveness of sustained vector control, outbreak response and/or medical case management, in the presence of a (hypothetical) highly targeted and low cost immunization strategy using a (non-hypothetical) medium-efficacy vaccine. Sustained vector control using existing technologies would cost little more than outbreak response, given the associated costs of medical case management. If sustained use of existing or upcoming technologies (of similar price) reduce vector populations by 70-90%, the cost per disability-adjusted life year averted is 2013 US$ 679-1331 (best estimates) relative to no intervention. Sustained vector control could be highly cost-effective even with less effective technologies (50-70% reduction in vector populations) and in the presence of a highly targeted and low cost immunization strategy using a medium-efficacy vaccine. Economic evaluation of the first-ever dengue vaccine is ongoing. However, even under very optimistic assumptions about a highly targeted and low cost immunization strategy, our results suggest that sustained vector control will continue to play an important role in mitigating the impact of environmental change and urbanization on human health. If additional benefits for the control of other Aedes borne diseases, such as Chikungunya, yellow fever and Zika fever are taken into account, the investment case is even stronger. High-burden endemic countries should proceed to map populations to be covered by sustained vector control.

An economic evaluation of vector control in the age of a dengue vaccine

PubMed Central

Haines, Alexander; Bangert, Mathieu; Farlow, Andrew; Hemingway, Janet; Velayudhan, Raman

2017-01-01

Introduction Dengue is a rapidly emerging vector-borne Neglected Tropical Disease, with a 30-fold increase in the number of cases reported since 1960. The economic cost of the illness is measured in the billions of dollars annually. Environmental change and unplanned urbanization are conspiring to raise the health and economic cost even further beyond the reach of health systems and households. The health-sector response has depended in large part on control of the Aedes aegypti and Ae. albopictus (mosquito) vectors. The cost-effectiveness of the first-ever dengue vaccine remains to be evaluated in the field. In this paper, we examine how it might affect the cost-effectiveness of sustained vector control. Methods We employ a dynamic Markov model of the effects of vector control on dengue in both vectors and humans over a 15-year period, in six countries: Brazil, Columbia, Malaysia, Mexico, the Philippines, and Thailand. We evaluate the cost (direct medical costs and control programme costs) and cost-effectiveness of sustained vector control, outbreak response and/or medical case management, in the presence of a (hypothetical) highly targeted and low cost immunization strategy using a (non-hypothetical) medium-efficacy vaccine. Results Sustained vector control using existing technologies would cost little more than outbreak response, given the associated costs of medical case management. If sustained use of existing or upcoming technologies (of similar price) reduce vector populations by 70–90%, the cost per disability-adjusted life year averted is 2013 US$ 679–1331 (best estimates) relative to no intervention. Sustained vector control could be highly cost-effective even with less effective technologies (50–70% reduction in vector populations) and in the presence of a highly targeted and low cost immunization strategy using a medium-efficacy vaccine. Discussion Economic evaluation of the first-ever dengue vaccine is ongoing. However, even under very optimistic assumptions about a highly targeted and low cost immunization strategy, our results suggest that sustained vector control will continue to play an important role in mitigating the impact of environmental change and urbanization on human health. If additional benefits for the control of other Aedes borne diseases, such as Chikungunya, yellow fever and Zika fever are taken into account, the investment case is even stronger. High-burden endemic countries should proceed to map populations to be covered by sustained vector control. PMID:28806786

Using computer aided case based reasoning to support clinical reasoning in community occupational therapy.

PubMed

Taylor, Bruce; Robertson, David; Wiratunga, Nirmalie; Craw, Susan; Mitchell, Dawn; Stewart, Elaine

2007-08-01

Community occupational therapists have long been involved in the provision of environmental control systems. Diverse electronic technologies with the potential to improve the health and quality of life of selected clients have developed rapidly in recent years. Occupational therapists employ clinical reasoning in order to determine the most appropriate technology to meet the needs of individual clients. This paper describes a number of the drivers that may increase the adoption of information and communication technologies in the occupational therapy profession. It outlines case based reasoning as understood in the domains of expert systems and knowledge management and presents the preliminary results of an ongoing investigation into the potential of a prototype computer aided case based reasoning tool to support the clinical reasoning of community occupational therapists in the process of assisting clients to choose home electronic assistive or smart house technology.

Variable rate irrigation (VRI)

USDA-ARS?s Scientific Manuscript database

Variable rate irrigation (VRI) technology is now offered by all major manufacturers of moving irrigation systems, mostly on center pivot irrigation systems. Variable irrigation depths may be controlled by sector only, in which case only the speed of the irrigation lateral is regulated. Or, variable ...

Air Pollutant Emissions Projections for the Cement and Steel Industry in China and the Impact of Emissions Control Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasanbeigi, Ali; Khanna, Nina; Price, Lynn

China’s cement and steel industry accounts for approximately half of the world’s total cement and steel production. These two industries are two of the most energy-intensive and highest carbon dioxide (CO 2)-emitting industries and two of the key industrial contributors to air pollution in China. For example, the cement industry is the largest source of particulate matter (PM) emissions in China, accounting for 40 percent of its industrial PM emissions and 27 percent of its total national PM emissions. The Chinese steel industry contributed to approximately 20 percent of sulfur dioxide (SO 2) emissions and 27 percent of PM emissionsmore » for all key manufacturing industries in China in 2013. In this study, we analyzed and projected the total PM and SO2 emissions from the Chinese cement and steel industry from 2010–2050 under three different scenarios: a Base Case scenario, an Advanced scenario, and an Advanced EOP (end-of-pipe) scenario. We used bottom-up emissions control technologies data and assumptions to project the emissions. In addition, we conducted an economic analysis to estimate the cost for PM emissions reductions in the Chinese cement industry using EOP control technologies, energy efficiency measures, and product change measures. The results of the emissions projection showed that there is not a substantial difference in PM emissions between the Base Case and Advanced scenarios, for both the cement and steel industries. This is mainly because PM emissions in the cement industry caused mainly by production process and not the fuel use. Since our forecast for the cement production in the Base Case and Advanced scenarios are not too different from each other, this results in only a slight difference in PM emissions forecast for these two scenarios. Also, we assumed a similar share and penetration rate of control technologies from 2010 up to 2050 for these two scenarios for the cement and steel industry. However, the Advanced EOP scenario showed significantly lower PM emissions for the cement industry, reaching to 1.7 million tons of PM in 2050, which is less than half of that in the other two scenarios. The Advanced EOP scenario also has the lowest SO2 emissions for the cement industry in China, reaching to 212,000 tons of SO2 in 2050, which is equal to 40 percent of the SO2 emissions in the Advanced scenario and 30 percent of the emissions in the Base Case scenario. The SO2 emission is mainly caused by fuel (coal) burning in cement kiln or steel processes. For the steel industry, the SO2 emissions of the Advanced EOP scenario are significantly lower than the other scenarios, with emissions declining to 323,000 tons in 2050, which is equal to 21 percent and 17 percent of the emissions of Advanced and Base Case scenarios in 2050, respectively. Results of the economic analysis show that for the Chinese cement industry, end-of-pipe PM control technologies have the lowest abatement cost per ton of PM reduced, followed by product change measures and energy efficiency measures, respectively. In summary, in order to meet Chinese national and regional air quality standards, best practice end-of-pipe emissions control technologies must be installed in both cement and steel industry and it must be supplemented by implementation of energy efficiency technologies and reduction of cement and steel production through structural change in industry.« less

Biosafety assessment protocols for new organisms in New Zealand: Can they apply internationally to emerging technologies?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barratt, B.I.P.; Moeed, A.; Malone, L.A.

2006-05-15

An analysis of established biosafety protocols for release into the environment of exotic plants and biological control agents for weeds and arthropod pests has been carried out to determine whether such protocols can be applied to relatively new and emerging technologies intended for the primary production industries, such as transgenic plants. Example case studies are described to indicate the scope of issues considered by regulators who make decisions on new organism releases. No transgenic plants have been released to date in New Zealand, but two field test approvals are described as examples. An analysis of the biosafety protocols has shownmore » that, while many of the risk criteria considered for decision-making by regulators are similar for all new organisms, a case-by-case examination of risks and potential impacts is required in order to fully assess risk. The value of post-release monitoring and validation of decisions made by regulators is emphasised.« less

Vehicle Technologies and Fuel Cell Technologies Program: Prospective Benefits Assessment Report for Fiscal Year 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, T. S.; Taylor, C. H.; Moore, J. S.

Under a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies offices of DOE’s Office of Energy Efficiency and Renewable Energy invest in research, development, demonstration, and deployment of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies. This report estimates the benefits of successfully developing and deploying these technologies (a “Program Success” case) relative to a base case (the “No Program” case). The Program Success case represents the future with completely successful deployment of Vehicle Technologies Office (VTO) and Fuel Cell Technologies Office (FCTO) technologies. The No Program case represents a future in which theremore » is no contribution after FY 2016 by the VTO or FCTO to these technologies. The benefits of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies were estimated on the basis of differences in fuel use, primary energy use, and greenhouse gas (GHG) emissions from light-, medium- and heavy-duty vehicles, including energy and emissions from fuel production, between the base case and the Program Success case. Improvements in fuel economy of various vehicle types, growth in the stock of fuel cell vehicles and other advanced technology vehicles, and decreased GHG intensity of hydrogen production and delivery in the Program Success case over the No Program case were projected to result in savings in petroleum use and GHG emissions. Benefits were disaggregated by individual program technology areas, which included the FCTO program and the VTO subprograms of batteries and electric drives; advanced combustion engines; fuels and lubricants; materials (for reduction in vehicle mass, or “lightweighting”); and, for medium- and heavy-duty vehicles, reduction in rolling and aerodynamic resistance. Projections for the Program Success case indicate that by 2035, the average fuel economy of on-road, light-duty vehicle stock could be 47% to 76% higher than in the No Program case. On-road medium- and heavy-duty vehicle stock could be as much as 39% higher. The resulting petroleum savings in 2035 were estimated to be as high as 3.1 million barrels per day, and reductions in GHG emissions were estimated to be as high as 500 million metric tons of CO2 equivalent per year. The benefits of continuing to invest government resources in advanced vehicle and fuel cell technologies would have significant economic value in the U.S. transportation sector and reduce its dependency on oil and its vulnerability to oil price shocks.« less

Design and evaluation of a computed tomography (CT)-compatible needle insertion device using an electromagnetic tracking system and CT images.

PubMed

Shahriari, Navid; Hekman, Edsko; Oudkerk, Matthijs; Misra, Sarthak

2015-11-01

Percutaneous needle insertion procedures are commonly used for diagnostic and therapeutic purposes. Although current technology allows accurate localization of lesions, they cannot yet be precisely targeted. Lung cancer is the most common cause of cancer-related death, and early detection reduces the mortality rate. Therefore, suspicious lesions are tested for diagnosis by performing needle biopsy. In this paper, we have presented a novel computed tomography (CT)-compatible needle insertion device (NID). The NID is used to steer a flexible needle (φ0.55 mm) with a bevel at the tip in biological tissue. CT images and an electromagnetic (EM) tracking system are used in two separate scenarios to track the needle tip in three-dimensional space during the procedure. Our system uses a control algorithm to steer the needle through a combination of insertion and minimal number of rotations. Noise analysis of CT images has demonstrated the compatibility of the device. The results for three experimental cases (case 1: open-loop control, case 2: closed-loop control using EM tracking system and case 3: closed-loop control using CT images) are presented. Each experimental case is performed five times, and average targeting errors are 2.86 ± 1.14, 1.11 ± 0.14 and 1.94 ± 0.63 mm for case 1, case 2 and case 3, respectively. The achieved results show that our device is CT-compatible and it is able to steer a bevel-tipped needle toward a target. We are able to use intermittent CT images and EM tracking data to control the needle path in a closed-loop manner. These results are promising and suggest that it is possible to accurately target the lesions in real clinical procedures in the future.

Characterizations of the radioactive waste by the remotely-controlled collimated spectrometric system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stepanov, Vyacheslav E.; Potapov, Victor N.; Smirnov, Sergey V.

Decontamination and decommissioning of the research reactors MR (Testing Reactor) and RFT (Reactor of Physics and Technology) has recently been initiated in the National Research Center (NRC) 'Kurchatov institute', Moscow. In the building, neighboring to the reactor, the storage of HLRW is located. The storage is made of monolithic concrete in which steel cells depth 4 m are located. In cells of storage the HLRW packed into cases are placed. These the radioactive waste are also subject to export on long storage in the specialized organization. For characterization of the radioactive waste in cases the remote-controlled collimated spectrometer system wasmore » used. The system consists of a spectrometric collimated gamma-ray detector, a color video camera and a control unit, mounted on a rotator, which are mounted on a tripod with the host computer. For determination of specific activity of radionuclides in cases, it is developed programs of calculation of coefficients of proportionality of specific activity to the corresponding speeds of the account in peaks of full absorption at single specific activity of radionuclides in cases. For determination of these coefficients the mathematical model of spectrometer system based on the Monte-Carlo method was used. Dependences of calibration coefficients for various radionuclides from distance between the detector and a case at various values of the radioactive waste density in cases are given. Measurements of specific activity in cases are taken and are discussed. By results of measurements decisions on the appeal of the radioactive waste being in cases are made. (authors)« less

The impact of active controls technology on the structural integrity of aeronautical vehicles

NASA Technical Reports Server (NTRS)

Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

1993-01-01

The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

Light Water Reactor Sustainability Program: Digital Technology Business Case Methodology Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken; Lawrie, Sean; Hart, Adam

The Department of Energy’s (DOE’s) Light Water Reactor Sustainability Program aims to develop and deploy technologies that will make the existing U.S. nuclear fleet more efficient and competitive. The program has developed a standard methodology for determining the impact of new technologies in order to assist nuclear power plant (NPP) operators in building sound business cases. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway is part of the DOE’s Light Water Reactor Sustainability (LWRS) Program. It conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systemsmore » of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals: (1) to ensure that legacy analog II&C systems are not life-limiting issues for the LWR fleet and (2) to implement digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Resolving long-term operational concerns with the II&C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation’s energy and environmental security. The II&C Pathway is conducting a series of pilot projects that enable the development and deployment of new II&C technologies in existing nuclear plants. Through the LWRS program, individual utilities and plants are able to participate in these projects or otherwise leverage the results of projects conducted at demonstration plants. Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) addresses the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the "benefits" side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology.« less

Controls Astrophysics and Structures Experiment in Space (CASES) advanced studies and planning

NASA Technical Reports Server (NTRS)

Wu, S. T.

1989-01-01

The CASES (Controls, Astrophysics, and Structures Experiment in Space) program consists of a flight demonstration of CSI (Controls-Structures Interactions) technology on the Space Shuttle. The basis structure consists of a 32 m deployable boom with actuators and sensors distributed along its length. Upon deployment from the Orbiter bay, the CASES structure will be characterized dynamically and its deformations controlled by a series of experimental control laws; and cold gas thrusters at its tip will be used to orient the Orbiter to a fixed celestial reference. The scientific observations will consist of hard x-ray imaging, at high resolution, of the Sun and the Galactic center. The hard x-ray observations require stable (few arc min) pointing at these targets for one or more position-sensitive proportional counters in the Orbiter bay, which view the object to be imaged through an aperture-encoding mask at the boom tip. This report gives the concensus developed at the second CASES Science Working Group meeting, which took place at NASA Marshall Space Flight Center May 16-17, 1990. An earlier paper and scientific summaries are available and form the basis for the present discussion.

Rarity of the Alzheimer Disease–Protective APP A673T Variant in the United States

PubMed Central

Wang, Li-San; Naj, Adam C.; Graham, Robert R.; Crane, Paul K.; Kunkle, Brian W.; Cruchaga, Carlos; Gonzalez Murcia, Josue D.; Cannon-Albright, Lisa; Baldwin, Clinton T.; Zetterberg, Henrik; Blennow, Kaj; Kukull, Walter A.; Faber, Kelley M.; Schupf, Nicole; Norton, Maria C.; Tschanz, JoAnn T.; Munger, Ronald G.; Corcoran, Christopher D.; Rogaeva, Ekaterina; Lin, Chiao-Feng; Dombroski, Beth A.; Cantwell, Laura B.; Partch, Amanda; Valladares, Otto; Hakonarson, Hakon; St George-Hyslop, Peter; Green, Robert C.; Goate, Alison M.; Foroud, Tatiana M.; Carney, Regina M.; Larson, Eric B.; Behrens, Timothy W.; Kauwe, John S. K.; Haines, Jonathan L.; Farrer, Lindsay A.; Pericak-Vance, Margaret A.; Mayeux, Richard; Schellenberg, Gerard D.

2015-01-01

IMPORTANCE Recently, a rare variant in the amyloid precursor protein gene (APP) was described in a population from Iceland. This variant, in which alanine is replaced by threonine at position 673 (A673T), appears to protect against late-onset Alzheimer disease (AD). We evaluated the frequency of this variant in AD cases and cognitively normal controls to determine whether this variant will significantly contribute to risk assessment in individuals in the United States. OBJECTIVE To determine the frequency of the APP A673T variant in a large group of elderly cognitively normal controls and AD cases from the United States and in 2 case-control cohorts from Sweden. DESIGN, SETTING, AND PARTICIPANTS Case-control association analysis of variant APP A673T in US and Swedish white individuals comparing AD cases with cognitively intact elderly controls. Participants were ascertained at multiple university-associated medical centers and clinics across the United States and Sweden by study-specific sampling methods. They were from case-control studies, community-based prospective cohort studies, and studies that ascertained multiplex families from multiple sources. MAIN OUTCOMES AND MEASURES Genotypes for the APP A673T variant were determined using the Infinium HumanExome V1 Beadchip (Illumina, Inc) and by TaqMan genotyping (Life Technologies). RESULTS The A673T variant genotypes were evaluated in 8943 US AD cases, 10 480 US cognitively normal controls, 862 Swedish AD cases, and 707 Swedish cognitively normal controls. We identified 3 US individuals heterozygous for A673T, including 1 AD case (age at onset, 89 years) and 2 controls (age at last examination, 82 and 77 years). The remaining US samples were homozygous for the alanine (A673) allele. In the Swedish samples, 3 controls were heterozygous for A673T and all AD cases were homozygous for the A673 allele. We also genotyped a US family previously reported to harbor the A673T variant and found a mother-daughter pair, both cognitively normal at ages 72 and 84 years, respectively, who were both heterozygous for A673T; however, all individuals with AD in the family were homozygous for A673. CONCLUSIONS AND RELEVANCE The A673T variant is extremely rare in US cohorts and does not play a substantial role in risk for AD in this population. This variant may be primarily restricted to Icelandic and Scandinavian populations. PMID:25531812

Violations of Gutenberg-Richter Relation in Anthropogenic Seismicity

NASA Astrophysics Data System (ADS)

Urban, Pawel; Lasocki, Stanislaw; Blascheck, Patrick; do Nascimento, Aderson Farias; Van Giang, Nguyen; Kwiatek, Grzegorz

2016-05-01

Anthropogenic seismicity (AS) is the undesired dynamic rockmass response to technological processes. AS environments are shallow hence their heterogeneities have important impact on AS. Moreover, AS is controlled by complex and changeable technological factors. This complicated origin of AS explains why models used in tectonic seismicity may be not suitable for AS. We study here four cases of AS, testing statistically whether the magnitudes follow the Gutenberg-Richter relation or not. The considered cases include the data from Mponeng gold mine in South Africa, the data observed during stimulation of geothermal well Basel 1 in Switzerland, the data from Acu water reservoir region in Brazil and the data from Song Tranh 2 hydropower plant region in Vietnam. The cases differ in inducing technologies, in the duration of periods in which they were recorded, and in the ranges of magnitudes. In all four cases the observed frequency-magnitude distributions statistically significantly differ from the Gutenberg-Richter relation. Although in all cases the Gutenberg-Richter b value changed in time, this factor turns out to be not responsible for the discovered deviations from the Gutenberg-Richter-born exponential distribution model. Though the deviations from Gutenberg-Richter law are not big, they substantially diminish the accuracy of assessment of seismic hazard parameters. It is demonstrated that the use of non-parametric kernel estimators of magnitude distribution functions improves significantly the accuracy of hazard estimates and, therefore, these estimators are recommended to be used in probabilistic analyses of seismic hazard caused by AS.

Bar-code medication administration system for anesthetics: effects on documentation and billing.

PubMed

Nolen, Agatha L; Rodes, W Dyer

2008-04-01

The effects of using a new bar-code medication administration (BCMA) system for anesthetics to automate documentation of drug administration by anesthesiologists were studied. From October 1, 2004, to September 15, 2005, all medications administered to patients undergoing cardiac surgery were documented with a BCMA system at a large acute care facility. Drug claims data for 12 targeted anesthetics in diagnosis-related groups (DRGs) 104-111 were analyzed to determine the quantity of drugs charged and the revenue generated. Those data were compared with claims data for a historical case-control group (October 1, 2003, to September 15, 2004, for the same DRGs) for which medication use was documented manually. From October 1, 2005, to October 1, 2006, anesthesiologists for cardiac surgeries either voluntarily used the automated system or completed anesthesia records manually. A total of 870 cardiac surgery cases for which the BCMA system was used were evaluated. There were 961 cardiac surgery cases in the historical control group. The BCMA system increased the quantity of drugs documented per case by 21.7% and drug revenue captured per case by 18.8%. The time needed by operating-room pharmacy staff to process an anesthesia record for billing decreased by eight minutes per case. After two years, anesthesiologists voluntarily used the new technology on 100% of cardiac surgery patients. Implementation of a BCMA system for anesthetic use in cardiac surgery increased the quantity of drugs charged by 21.7% per case and drug revenue per case by 18.8%. Anesthesiologists continued to use the automated system on a voluntary basis after conclusion of the initial study.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

NASA Technical Reports Server (NTRS)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Some recent studies on laser cladding and dissimilar welding

NASA Astrophysics Data System (ADS)

Kaul, Rakesh; Ganesh, P.; Paul, C. P.; Albert, S. K.; Mudali, U. Kamachi; Nath, A. K.

2006-01-01

Indigenous development of high power CO II laser technology and industrial application of lasers represent two important mandates of the laser program, being pursued at Centre for Advanced Technology (CAT), India. The present paper describes some of the important laser material processing studies, involving cladding and dissimilar welding, performed in authors' laboratory. The first case study describes how low heat input characteristics of laser cladding process has been successfully exploited for suppressing dilution in "Colmonoy6" (a nickel-base hardfacing alloy) deposits on austenitic stainless steel components. Crack free hardfaced deposits were obtained by controlling heating and cooling rates associated with laser treatment. The results show significant advantage over Colmonoy 6 deposits made by GTAW, where a 2.5 mm thick region of dilution (with reduced hardness) develops next to substrateiclad interface. The next work involves laser-assisted deposition of graded "Stellite6" (a Co-base hardfacing alloy) with smooth transition in chemical composition and hardness for enhanced resistance against cracking, esp. under thermal cycling conditions. The following two case studies demonstrate significant improvement in corrosion properties of type 304L stainless steel by laser surface alloying, achieved through cladding route. The following case study demonstrates engineering of fusion zone microstructure of end plug dissimilar weld (between alloy D9 and type 3 16M stainless steel) by controlled preferential displacement of focused laser beam, which, in-turn, enhanced its resistance against solidification cracking. Crater appearing at the termination point of laser weld is also eliminated by ramping of laser power towards the end of laser welding. The last case study involves engineering of fusion zone microstructure of dissimilar laser weld between type 304 austenitic stainless steel and stabilized 17%Cr ferritic stainless steel by controlling welding parameters.

Assessing the Validity of Using Serious Game Technology to Analyze Physician Decision Making

PubMed Central

Mohan, Deepika; Angus, Derek C.; Ricketts, Daniel; Farris, Coreen; Fischhoff, Baruch; Rosengart, Matthew R.; Yealy, Donald M.; Barnato, Amber E.

2014-01-01

Background Physician non-compliance with clinical practice guidelines remains a critical barrier to high quality care. Serious games (using gaming technology for serious purposes) have emerged as a method of studying physician decision making. However, little is known about their validity. Methods We created a serious game and evaluated its construct validity. We used the decision context of trauma triage in the Emergency Department of non-trauma centers, given widely accepted guidelines that recommend the transfer of severely injured patients to trauma centers. We designed cases with the premise that the representativeness heuristic influences triage (i.e. physicians make transfer decisions based on archetypes of severely injured patients rather than guidelines). We randomized a convenience sample of emergency medicine physicians to a control or cognitive load arm, and compared performance (disposition decisions, number of orders entered, time spent per case). We hypothesized that cognitive load would increase the use of heuristics, increasing the transfer of representative cases and decreasing the transfer of non-representative cases. Findings We recruited 209 physicians, of whom 168 (79%) began and 142 (68%) completed the task. Physicians transferred 31% of severely injured patients during the game, consistent with rates of transfer for severely injured patients in practice. They entered the same average number of orders in both arms (control (C): 10.9 [SD 4.8] vs. cognitive load (CL):10.7 [SD 5.6], p = 0.74), despite spending less time per case in the control arm (C: 9.7 [SD 7.1] vs. CL: 11.7 [SD 6.7] minutes, p<0.01). Physicians were equally likely to transfer representative cases in the two arms (C: 45% vs. CL: 34%, p = 0.20), but were more likely to transfer non-representative cases in the control arm (C: 38% vs. CL: 26%, p = 0.03). Conclusions We found that physicians made decisions consistent with actual practice, that we could manipulate cognitive load, and that load increased the use of heuristics, as predicted by cognitive theory. PMID:25153149

Signal Analysis of Automotive Engine Spark Ignition System using Case-Based Reasoning (CBR) and Case-based Maintenance (CBM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, H.; Vong, C. M.; Wong, P. K.

2010-05-21

With the development of modern technology, modern vehicles adopt electronic control system for injection and ignition. In traditional way, whenever there is any malfunctioning in an automotive engine, an automotive mechanic usually performs a diagnosis in the ignition system of the engine to check any exceptional symptoms. In this paper, we present a case-based reasoning (CBR) approach to help solve human diagnosis problem. Nevertheless, one drawback of CBR system is that the case library will be expanded gradually after repeatedly running the system, which may cause inaccuracy and longer time for the CBR retrieval. To tackle this problem, case-based maintenancemore » (CBM) framework is employed so that the case library of the CBR system will be compressed by clustering to produce a set of representative cases. As a result, the performance (in retrieval accuracy and time) of the whole CBR system can be improved.« less

Wisconsin’s Environmental Public Health Tracking Network: Information Systems Design for Childhood Cancer Surveillance

PubMed Central

Hanrahan, Lawrence P.; Anderson, Henry A.; Busby, Brian; Bekkedal, Marni; Sieger, Thomas; Stephenson, Laura; Knobeloch, Lynda; Werner, Mark; Imm, Pamela; Olson, Joseph

2004-01-01

In this article we describe the development of an information system for environmental childhood cancer surveillance. The Wisconsin Cancer Registry annually receives more than 25,000 incident case reports. Approximately 269 cases per year involve children. Over time, there has been considerable community interest in understanding the role the environment plays as a cause of these cancer cases. Wisconsin’s Public Health Information Network (WI-PHIN) is a robust web portal integrating both Health Alert Network and National Electronic Disease Surveillance System components. WI-PHIN is the information technology platform for all public health surveillance programs. Functions include the secure, automated exchange of cancer case data between public health–based and hospital-based cancer registrars; web-based supplemental data entry for environmental exposure confirmation and hypothesis testing; automated data analysis, visualization, and exposure–outcome record linkage; directories of public health and clinical personnel for role-based access control of sensitive surveillance information; public health information dissemination and alerting; and information technology security and critical infrastructure protection. For hypothesis generation, cancer case data are sent electronically to WI-PHIN and populate the integrated data repository. Environmental data are linked and the exposure–disease relationships are explored using statistical tools for ecologic exposure risk assessment. For hypothesis testing, case–control interviews collect exposure histories, including parental employment and residential histories. This information technology approach can thus serve as the basis for building a comprehensive system to assess environmental cancer etiology. PMID:15471739

Interactions of Science and Technology in the Innovative Process: Some Case Studies. Final Report.

ERIC Educational Resources Information Center

Battelle Memorial Inst., Columbus, OH. Columbus Labs.

This is the final report of the latest effort in a series sponsored by the National Science Foundation on the innovation process. It adds to the store of retrospective case studies by documenting historically the significant events in several technological innovations of high social impact. These cases, drawn together by the Battelle Columbus…

The Cyber Threat to Military Just-in-Time Logistics: Risk Mitigation and the Return to Forward Basing

DTIC Science & Technology

2017-05-26

Generation Warfare (RNGW) ......................................................4 What is Traditional Forward-Based or “Just-in- Case ” Logistics...Industrial Control Systems-Cyber Emergency Response Team IT Information Technology JFC Joint Force Commander JIC Just-in- Case JIT Just-in-Time JP Joint...aspects of demand-driven or “Just-in-Time” (JIT) logistics, and bringing back the concept of traditional large inventory or “Just-in- Case ” (JIC) logistics

Effects of hydrotreated vegetable oil on emissions of aerosols and gases from light-duty and medium-duty older technology engines.

PubMed

Bugarski, Aleksandar D; Hummer, Jon A; Vanderslice, Shawn

2016-01-01

This study was conducted to assess the potential of hydrotreated vegetable oil renewable diesel (HVORD) as a control strategy to reduce exposure of workers to diesel aerosols and gases. The effects of HVORD on criteria aerosol and gaseous emissions were compared with those of ultralow sulfur diesel (ULSD). The results of comprehensive testing at four steady-state conditions and one transient cycle were used to characterize the aerosol and gaseous emissions from two older technology engines: (1) a naturally aspirated mechanically controlled and (2) a turbocharged electronically controlled engine. Both engines were equipped with diesel oxidation catalytic converters (DOCs). For all test conditions, both engines emitted measurably lower total mass concentrations of diesel aerosols, total carbon, and elemental carbon when HVORD was used in place of ULSD. For all test conditions, the reductions in total mass concentrations were more substantial for the naturally aspirated than for the turbocharged engine. In the case of the naturally aspirated engine, HVORD also favorably affected total surface area of aerosols deposited in the alveolar region of human lungs (TSAADAR) and the total number concentrations of aerosols. In the case of the turbocharged electronically controlled engine, for some of the test conditions HVORD adversely affected the TSAADAR and total number concentrations of aerosols. In the majority of the test cases involving the naturally aspirated mechanically controlled engine, HVORD favorably affected carbon dioxide (CO2), nitrogen oxides (NOX), and nitric oxide (NO) concentrations, but adversely affected NO2 and total hydrocarbon concentrations, while the effects of the fuels on carbon monoxide (CO) concentrations were masked by the effects of DOC. In the case of the turbocharged electronically controlled engine, the CO2, CO, NOX, NO, and total hydrocarbon concentrations were generally lower when HVORD was used in place of ULSD. The effects of the fuels on NO2 concentrations were masked by the more prominent effects of DOC.

Effects of hydrotreated vegetable oil on emissions of aerosols and gases from light-duty andmedium-duty older technology engines

PubMed Central

Bugarski, Aleksandar D.; Hummer, Jon A.; Vanderslice, Shawn

2017-01-01

This study was conducted to assess the potential of hydrotreated vegetable oil renewable diesel (HVORD) as a control strategy to reduce exposure of workers to diesel aerosols and gases. The effects of HVORD on criteria aerosol and gaseous emissions were compared with those of ultralow sulfur diesel (ULSD). The results of comprehensive testing at four steady-state conditions and one transient cycle were used to characterize the aerosol and gaseous emissions from two older technology engines: (1) a naturally aspirated mechanically controlled and (2) a turbocharged electronically controlled engine. Both engines were equipped with diesel oxidation catalytic converters (DOCs). For all test conditions, both engines emitted measurably lower total mass concentrations of diesel aerosols, total carbon, and elemental carbon when HVORD was used in place of ULSD. For all test conditions, the reductions in total mass concentrations were more substantial for the naturally aspirated than for the turbocharged engine. In the case of the naturally aspirated engine, HVORD also favorably affected total surface area of aerosols deposited in the alveolar region of human lungs (TSAADAR) and the total number concentrations of aerosols. In the case of the turbocharged electronically controlled engine, for some of the test conditions HVORD adversely affected the TSAADAR and total number concentrations of aerosols. In the majority of the test cases involving the naturally aspirated mechanically controlled engine, HVORD favorably affected carbon dioxide (CO2), nitrogen oxides (NOX), and nitric oxide (NO) concentrations, but adversely affected NO2 and total hydrocarbon concentrations, while the effects of the fuels on carbon monoxide (CO) concentrations were masked by the effects of DOC. In the case of the turbocharged electronically controlled engine, the CO2, CO, NOX, NO, and total hydrocarbon concentrations were generally lower when HVORD was used in place of ULSD. The effects of the fuels on NO2 concentrations were masked by the more prominent effects of DOC. PMID:26588029

Incorporating Demand and Supply Constraints into Economic Evaluations in Low‐Income and Middle‐Income Countries

PubMed Central

Mangham‐Jefferies, Lindsay; Gomez, Gabriela B.; Pitt, Catherine; Foster, Nicola

2016-01-01

Abstract Global guidelines for new technologies are based on cost and efficacy data from a limited number of trial locations. Country‐level decision makers need to consider whether cost‐effectiveness analysis used to inform global guidelines are sufficient for their situation or whether to use models that adjust cost‐effectiveness results taking into account setting‐specific epidemiological and cost heterogeneity. However, demand and supply constraints will also impact cost‐effectiveness by influencing the standard of care and the use and implementation of any new technology. These constraints may also vary substantially by setting. We present two case studies of economic evaluations of the introduction of new diagnostics for malaria and tuberculosis control. These case studies are used to analyse how the scope of economic evaluations of each technology expanded to account for and then address demand and supply constraints over time. We use these case studies to inform a conceptual framework that can be used to explore the characteristics of intervention complexity and the influence of demand and supply constraints. Finally, we describe a number of feasible steps that researchers who wish to apply our framework in cost‐effectiveness analyses. PMID:26786617

Therapeutic effects of saireito (chai-ling-tang), a traditional Japanese herbal medicine, on lymphedema caused by radiotherapy: a case series study.

PubMed

Nagai, Aiko; Shibamoto, Yuta; Ogawa, Keiko

2013-01-01

Despite the development of radiotherapy machines and technologies, a proportion of patients suffer from radiation-induced lymphedema. Saireito (SRT) is a traditional Japanese herbal medicine that has been used for treating edema and inflammation in conditions such as nephritic disease. This study investigated the effect of SRT on lymphedema caused by radiotherapy. Four patients were treated with SRT at a dose of 9 g/day. The severity of lymphedema was evaluated using the Common Terminology Criteria for Adverse Events version 4 and Numerical Rating Scale before and after SRT treatment. After the treatment with SRT, 2 of 4 patients (50%) showed apparent improvement in lymphedema. One of the cases had difficulty in wearing the custom-made thermoplastic cast, but after SRT administration, he could wear the mask easily. One case decided to stop taking SRT 3 days after initiation because cough and fever appeared. In conclusion, it is important to control the side effects of radiotherapy, which leads to improved tumor control rates. Prospective randomized studies are necessary to confirm the findings of this case series study.

Digital Technology: A Double-Edged Sword for a School Principal in Rural Pennsylvania

ERIC Educational Resources Information Center

Kotok, Stephen; Kryst, Erica L.

2017-01-01

This case study was inspired by visits to several different rural high schools in Pennsylvania. The case illuminates the challenges faced by rural principals and superintendents who want to integrate digital technology into their curriculum, but who lack certain financial and human capital resources. Although this case occurred in a remote, rural…

A Case Study of Technology Choices by High School Students

ERIC Educational Resources Information Center

Owens-Hartman, Amy R.

2015-01-01

The purpose of this case study was to examine student technology choices when given the freedom to choose technology devices to complete a project-based learning activity in a content area of study. The study also analyzed factors affecting technology choice as well as how technology proficiency scores aligned to technology choices. Patterns and…

BIOMONITORING TO ACHIEVE CONTROL OF TOXIC EFFLUENTS

EPA Science Inventory

This 48 - page Technology Transfer Report provides a case study of how water quality-based toxicity control procedures can be combined with chemical analyses and biological stream surveys to achieve more effective water pollution control. t describes how regulatory agencies used ...

The role of ethics in information technology decisions: a case-based approach to biomedical informatics education.

PubMed

Anderson, James G

2004-03-18

The purpose of this paper is to propose a case-based approach to instruction regarding ethical issues raised by the use of information technology (IT) in healthcare. These issues are rarely addressed in graduate degree and continuing professional education programs in health informatics. There are important reasons why ethical issues need to be addressed in informatics training. Ethical issues raised by the introduction of information technology affect practice and are ubiquitous. These issues are frequently among the most challenging to young practitioners who are ill prepared to deal with them in practice. First, the paper provides an overview of methods of moral reasoning that can be used to identify and analyze ethical problems in health informatics. Second, we provide a framework for defining cases that involve ethical issues and outline major issues raised by the use of information technology. Specific cases are used as examples of new dilemmas that are posed by the introduction of information technology in healthcare. These cases are used to illustrate how ethics can be integrated with the other elements of informatics training. The cases discussed here reflect day-to-day situations that arise in health settings that require decisions. Third, an approach that can be used to teach ethics in health informatics programs is outlined and illustrated.

Case studies for GSHP demonstration projects in the US

DOE PAGES

Liu, Xiaobing; Malhotra, Mini; Im, Piljae

2015-07-01

Under the American Recovery and Reinvestment Act , twenty-six ground source heat pump (GSHP) projects were competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This article gives an overview of the case studies for six of the systems. These case studies evaluated efficiencies, energy savings, and costs of the demonstrated systems. In addition, it was found that more energy savings could be achieved if controls of GSHP system are improved.

Evolving Uses of Technology in Case-Based Teacher Education.

ERIC Educational Resources Information Center

Smith, Janet C.; Diaz, Ricardo

Case study-based teacher education has been advocated since the mid-1980s. The evolution of technology-facilitated, case study-based professional development for adult education professionals may be traced by examining three projects involving the National Center on Adult Literacy and the International Literacy Institute at University of…

Technology and tuberculosis control: the OUT-TB Web experience.

PubMed

Guthrie, Jennifer L; Alexander, David C; Marchand-Austin, Alex; Lam, Karen; Whelan, Michael; Lee, Brenda; Furness, Colin; Rea, Elizabeth; Stuart, Rebecca; Lechner, Julia; Varia, Monali; McLean, Jennifer; Jamieson, Frances B

2017-04-01

Develop a tool to disseminate integrated laboratory, clinical, and demographic case data necessary for improved contact tracing and outbreak detection of tuberculosis (TB). In 2007, the Public Health Ontario Laboratories implemented a universal genotyping program to monitor the spread of TB strains within Ontario. Ontario Universal Typing of TB (OUT-TB) Web utilizes geographic information system (GIS) technology with a relational database platform, allowing TB control staff to visualize genotyping matches and microbiological data within the context of relevant epidemiological and demographic data. OUT-TB Web is currently available to the 8 health units responsible for >85% of Ontario's TB cases and is a valuable tool for TB case investigation. Users identified key features to implement for application enhancements, including an e-mail alert function, customizable heat maps for visualizing TB and drug-resistant cases, socioeconomic map layers, a dashboard providing TB surveillance metrics, and a feature for animating the geographic spread of strains over time. OUT-TB Web has proven to be an award-winning application and a useful tool. Developed and enhanced using regular user feedback, future versions will include additional data sources, enhanced map and line-list filter capabilities, and development of a mobile app. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Seminar on the prevention and control of STDs.

PubMed

Jiang, L

1993-06-01

The Research Institute of Philosophy of the Chinese Academy of Social Sciences, the Chinese Society for Dialectics of Nature, and the Chinese Association for Science and Technology held an expert seminar on prevention and control of sexually transmitted diseases (STDs) March 15-18, 1993. A multidisciplinary group of 80 persons from departments and agencies and international organizations attended. An overview of STDs in China was presented: STDs were eliminated during the 1960s, but reemerged in the late 1970s, and the rate was increasing. By the third quarter of 1992, 759,989 cases of STDs were reported throughout the country. Gonorrhea and syphilis cases declined, and condyloma and nongonorrheal urethritis cases rose. The number of cases of infected women increased. The sex ratio for STD patients decreased from 2.04 in 1989 to 1.60 in 1991. New cases of infected babies were reported. AIDS was first discovered in a case involving foreign tourists in China. By November 30, 1992, 1.61 million persons have received an HIV test. There were 12 cases of AIDS, of which 5 were in foreigners, among the 969 positive HIV cases. Most HIV cases involved drug addicts and labor migrants, who may have been in contact with prostitutes abroad. Spouses of HIV cases were also infected. Some experts have speculated that China is in the beginning of an AIDS spread. Concern was raised about potential transmission through transfusions of HIV-infected blood. Efforts need to be made to publicize information about the transmission and nature of AIDS and to strengthen medical treatment and monitoring systems. AIDS prevention needs to be integrated into family planning and sex education programs.

Rare variant association analysis in case-parents studies by allowing for missing parental genotypes.

PubMed

Li, Yumei; Xiang, Yang; Xu, Chao; Shen, Hui; Deng, Hongwen

2018-01-15

The development of next-generation sequencing technologies has facilitated the identification of rare variants. Family-based design is commonly used to effectively control for population admixture and substructure, which is more prominent for rare variants. Case-parents studies, as typical strategies in family-based design, are widely used in rare variant-disease association analysis. Current methods in case-parents studies are based on complete case-parents data; however, parental genotypes may be missing in case-parents trios, and removing these data may lead to a loss in statistical power. The present study focuses on testing for rare variant-disease association in case-parents study by allowing for missing parental genotypes. In this report, we extended the collapsing method for rare variant association analysis in case-parents studies to allow for missing parental genotypes, and investigated the performance of two methods by using the difference of genotypes between affected offspring and their corresponding "complements" in case-parent trios and TDT framework. Using simulations, we showed that, compared with the methods just only using complete case-parents data, the proposed strategy allowing for missing parental genotypes, or even adding unrelated affected individuals, can greatly improve the statistical power and meanwhile is not affected by population stratification. We conclude that adding case-parents data with missing parental genotypes to complete case-parents data set can greatly improve the power of our strategy for rare variant-disease association.

Control Technologies for Room Air-conditioner and Packaged Air-conditioner

NASA Astrophysics Data System (ADS)

Ito, Nobuhisa

Trends of control technologies about air-conditioning machineries, especially room or packaged air conditioners, are presented in this paper. Multiple air conditioning systems for office buildings are mainly described as one application of the refrigeration cycle control technologies including sensors for thermal comfort and heating/ cooling loads are also described as one of the system control technologies. Inverter systems and related technologies for driving variable speed compressors are described in both case of including induction motors and brushless DC motors. Technologies for more accurate control to meet various kind of regulations such as ozone layer destruction, energy saving and global warming, and for eliminating harmonic distortion of power source current, as a typical EMC problem, will be urgently desired.

Results of a randomized trial of HERMES-assisted versus non-HERMES-assisted laparoscopic antireflux surgery.

PubMed

Luketich, J D; Fernando, H C; Buenaventura, P O; Christie, N A; Grondin, S C; Schauer, P R

2002-09-01

Speech recognition technology is a recent development in minimally invasive surgery. This study was designed to assess the impact of HERMES on operating room efficiency and user satisfaction. Patients undergoing laparoscopic antireflux operations by surgeons experienced in minimally invasive surgery were randomized to HERMES-assisted or standard laparoscopic operations. The variables of interest were circulating nurse's time spent adjusting devices that are voice-controlled by HERMES, number of adjustments to devices requested, and surgeon and nurse satisfaction measured on a scale from 1 (dissatisfied) to 10 (satisfied). A total of 30 cases were studied. In the non-HERMES cases, nurses were interrupted to make device adjustments an average of 15.3 times per case versus 0.33 times per case in the with-HERMES cases (p < 0.01). The interruptions during the non-HERMES cases averaged 4.35 min per case versus 0.16 min per case in the with-HERMES cases (p = 0.03). Average satisfaction scores for HERMES operations as opposed to non-HERMES operations were 9.2 versus 5.3 for nurses (p < 0.01) and 9.0 versus 5.1 for surgeons (p < 0.01). Physician and nurse acceptance of HERMES was very high because of the smoother interruption-free environment.

Editors and Hardware: Three Case Studies in Technology and Newspaper Management.

ERIC Educational Resources Information Center

Sylvie, George; Danielson, Wayne

A study examined the impact on newspaper managers of three emerging technologies: videotex, personal computer networks, and pagination. The study predicted that: (1) the greater the relative advantage and compatibility of a technology, the less likely will the manager need to pursue motivational and controlling measures in getting subordinates to…

Case Studies for School Administrators: Managing Change in Education.

ERIC Educational Resources Information Center

Benham, Maenette K. P. Ah Nee

This book examines case-based learning in educational leadership courses, discusses case-based learning as an educational tool, exemplifies methods of writing a case study, and contains 14 case-studies by teachers and administrators. "Stakeholders in a House of Cards," by Audrey Burgher, discusses integrating technology with innovation.…

Emergence of telerobotic control enhancement from research in machine autonomy

NASA Astrophysics Data System (ADS)

Haddad, Albert G., Sr.; Adams, John C.; Berardo, Peter A.; Ohlund, Kent O.; Van Vactor, David L.

1992-03-01

This paper provides a description of the Robotic Research Program being conducted at the Lockheed Research and Development Division Laboratories. It details the approach taken to fuse autonomy with teleoperative control. The component/enabling technologies are defined and the status of the development of those technologies is reported. CASE tools used in an accelerated development environment are identified and discussed.

Applications of surface metrology in firearm identification

NASA Astrophysics Data System (ADS)

Zheng, X.; Soons, J.; Vorburger, T. V.; Song, J.; Renegar, T.; Thompson, R.

2014-01-01

Surface metrology is commonly used to characterize functional engineering surfaces. The technologies developed offer opportunities to improve forensic toolmark identification. Toolmarks are created when a hard surface, the tool, comes into contact with a softer surface and causes plastic deformation. Toolmarks are commonly found on fired bullets and cartridge cases. Trained firearms examiners use these toolmarks to link an evidence bullet or cartridge case to a specific firearm, which can lead to a criminal conviction. Currently, identification is typically based on qualitative visual comparison by a trained examiner using a comparison microscope. In 2009, a report by the National Academies called this method into question. Amongst other issues, they questioned the objectivity of visual toolmark identification by firearms examiners. The National Academies recommended the development of objective toolmark identification criteria and confidence limits. The National Institute of Standards and Technology (NIST) have applied its experience in surface metrology to develop objective identification criteria, measurement methods, and reference artefacts for toolmark identification. NIST developed the Standard Reference Material SRM 2460 standard bullet and SRM 2461 standard cartridge case to facilitate quality control and traceability of identifications performed in crime laboratories. Objectivity is improved through measurement of surface topography and application of unambiguous surface similarity metrics, such as the maximum value (ACCFMAX) of the areal cross correlation function. Case studies were performed on consecutively manufactured tools, such as gun barrels and breech faces, to demonstrate that, even in this worst case scenario, all the tested tools imparted unique surface topographies that were identifiable. These studies provide scientific support for toolmark evidence admissibility in criminal court cases.

Promoting the Use of Online Social Technology as a Case-Based Learning Tool

ERIC Educational Resources Information Center

Ractham, Peter; Chen, Charlie

2013-01-01

Social technology is proliferating and influencing different aspects of society. However, very few studies have examined the use of such a technology for a case-based learning pedagogy. This preliminary study investigates the use of social technology as a case-based learning tool to improve the effectiveness of case-based learning in the…

15 CFR Supplement No. 1 to Part 766 - Guidance on Charging and Penalty Determinations in Settlement of Administrative Enforcement Cases

Code of Federal Regulations, 2010 CFR

2010-01-01

... based on nuclear, biological, and chemical weapon proliferation, missile technology proliferation, and... are relevant to the application of this guidance to their cases, to whether a violation has in fact... question—for example, export of items subject to nuclear controls to a country with a poor record of...

15 CFR Supplement No. 1 to Part 766 - Guidance on Charging and Penalty Determinations in Settlement of Administrative Enforcement Cases

Code of Federal Regulations, 2011 CFR

2011-01-01

... based on nuclear, biological, and chemical weapon proliferation, missile technology proliferation, and... are relevant to the application of this guidance to their cases, to whether a violation has in fact... question—for example, export of items subject to nuclear controls to a country with a poor record of...

Drainpipe network management information system design based on GIS and SCADA technique

NASA Astrophysics Data System (ADS)

Gu, Ze-Yu; Zhao, De-An

2011-02-01

Achieving urban drainpipe network integration of geographical information system (GIS) and supervisory control and data acquisition (SCADA) technology is described in this paper. The system design's plans are put forward, which have realized GIS and SCADA system supplementary in the technology and strengthened the model visible analysis ability. It is verified by practical cases that the system has more practical values and a good prospect.

Incorporating Demand and Supply Constraints into Economic Evaluations in Low-Income and Middle-Income Countries.

PubMed

Vassall, Anna; Mangham-Jefferies, Lindsay; Gomez, Gabriela B; Pitt, Catherine; Foster, Nicola

2016-02-01

Global guidelines for new technologies are based on cost and efficacy data from a limited number of trial locations. Country-level decision makers need to consider whether cost-effectiveness analysis used to inform global guidelines are sufficient for their situation or whether to use models that adjust cost-effectiveness results taking into account setting-specific epidemiological and cost heterogeneity. However, demand and supply constraints will also impact cost-effectiveness by influencing the standard of care and the use and implementation of any new technology. These constraints may also vary substantially by setting. We present two case studies of economic evaluations of the introduction of new diagnostics for malaria and tuberculosis control. These case studies are used to analyse how the scope of economic evaluations of each technology expanded to account for and then address demand and supply constraints over time. We use these case studies to inform a conceptual framework that can be used to explore the characteristics of intervention complexity and the influence of demand and supply constraints. Finally, we describe a number of feasible steps that researchers who wish to apply our framework in cost-effectiveness analyses. © 2016 The Authors. Health Economics published by John Wiley & Sons Ltd.

Benefits of Integration of Aerojet Rocketdyne and RTI Advanced Gasification Technologies for Hydrogen-Rich Syngas Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, Vijay; Denton, David; SHarma, Pradeep

The key objective for this project was to evaluate the potential to achieve substantial reductions in the production cost of H 2-rich syngas via coal gasification with near-zero emissions due to the cumulative and synergistic benefits realized when multiple advanced technologies are integrated into the overall conversion process. In this project, Aerojet Rocketdyne’s (AR’s) advanced gasification technology (currently being offered as R-GAS™) and RTI International’s (RTI’s) advanced warm syngas cleanup technologies were evaluated via a number of comparative techno-economic case studies. AR’s advanced gasification technology consists of a dry solids pump and a compact gasifier system. Based on the uniquemore » design of this gasifier, it has been shown to reduce the capital cost of the gasification block by between 40 and 50%. At the start of this project, actual experimental work had been demonstrated through pilot plant systems for both the gasifier and dry solids pump. RTI’s advanced warm syngas cleanup technologies consist primarily of RTI’s Warm Gas Desulfurization Process (WDP) technology, which effectively allows decoupling of the sulfur and CO 2 removal allowing for more flexibility in the selection of the CO 2 removal technology, plus associated advanced technologies for direct sulfur recovery and water gas shift (WGS). WDP has been demonstrated at pre-commercial scale using an activated amine carbon dioxide recovery process which would not have been possible if a majority of the sulfur had not been removed from the syngas by WDP. This pre-commercial demonstration of RTI’s advanced warm syngas cleanup system was conducted in parallel to the activities on this project. The technical data and cost information from this pre-commercial demonstration were extensively used in this project during the techno-economic analysis. With this project, both of RTI’s advanced WGS technologies were investigated. Because RT’s advanced fixed-bed WGS (AFWGS) process was successfully implemented in the WDP pre-commercial demonstration test mentioned above, this technology was used as part of RTI’s advanced warm syngas technology package for the techno-economic analyses for this project. RTI’s advanced transport-reactor-based WGS (ATWGS) process was still conceptual at the start of this project, but one of the tasks for this project was to evaluate the technical feasibility of this technology. In each of the three application-based comparison studies conducted as part of this project, the reference case was based on an existing Department of Energy National Energy Technology Laboratory (DOE/NETL) system study. Each of these references cases used existing commercial technology and the system resulted in > 90% carbon capture. In the comparison studies for the use of the hydrogen-rich syngas generated in either an Integrated Gasification Combined Cycle (IGCC) or a Coal-to-Methanol (CTM) plant, the comparison cases consisted of the reference case, a case with the integration of each individual advanced technology (either AR or RTI), and finally a case with the integration of all the advanced technologies (AR and RTI combined). In the Coal-to-Liquids (CTL) comparison study, the comparison study consisted of only three cases, which included a reference case, a case with just RTI’s advanced syngas cleaning technology, and a case with AR’s and RTI’s advanced technologies. The results from these comparison studies showed that the integration of the advanced technologies did result in substantial benefits, and by far the greatest benefits were achieved for cases integrating all the advanced technologies. For the IGCC study, the fully integrated case resulted in a 1.4% net efficiency improvement, an 18% reduction in capital cost per kW of capacity, a 12% reduction in the operating cost per kWh, and a 75–79% reduction in sulfur emissions. For the CTM case, the fully integrated plant resulted in a 22% reduction in capital cost, a 13% reduction in operating costs, a > 99% net reduction in sulfur emissions, and a reduction of 13–15% in CO 2 emissions. Because the capital cost represents over 60% of the methanol Required Selling Price (RSP), the significant reduction in the capital cost for the advanced technology case resulted in an 18% reduction in methanol RSP. For the CTL case, the fully integrated plant resulted in a 16% reduction in capital cost, which represented a 13% reduction in diesel RSP. Finally, the technical feasibility analysis of RTI’s ATWGS process demonstrated that a fluid-bed catalyst with sufficient attrition resistance and WGS activity could be made and that the process achieved about a 24% reduction in capital cost compared to a conventional fixed-bed commercial process.« less

Automatic feedback to promote safe walking and speech loudness control in persons with multiple disabilities: two single-case studies.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Green, Vanessa A; Alberti, Gloria; Boccasini, Adele; Smaldone, Angela; Oliva, Doretta; Bosco, Andrea

2014-08-01

Assessing automatic feedback technologies to promote safe travel and speech loudness control in two men with multiple disabilities, respectively. The men were involved in two single-case studies. In Study I, the technology involved a microprocessor, two photocells, and a verbal feedback device. The man received verbal alerting/feedback when the photocells spotted an obstacle in front of him. In Study II, the technology involved a sound-detecting unit connected to a throat and an airborne microphone, and to a vibration device. Vibration occurred when the man's speech loudness exceeded a preset level. The man included in Study I succeeded in using the automatic feedback in substitution of caregivers' alerting/feedback for safe travel. The man of Study II used the automatic feedback to successfully reduce his speech loudness. Automatic feedback can be highly effective in helping persons with multiple disabilities improve their travel and speech performance.

Effectiveness and cost-effectiveness of traditional and new partner notification technologies for curable sexually transmitted infections: observational study, systematic reviews and mathematical modelling.

PubMed

Althaus, Christian L; Turner, Katherine M E; Mercer, Catherine H; Auguste, Peter; Roberts, Tracy E; Bell, Gill; Herzog, Sereina A; Cassell, Jackie A; Edmunds, W John; White, Peter J; Ward, Helen; Low, Nicola

2014-01-01

Partner notification is essential to the comprehensive case management of sexually transmitted infections. Systematic reviews and mathematical modelling can be used to synthesise information about the effects of new interventions to enhance the outcomes of partner notification. To study the effectiveness and cost-effectiveness of traditional and new partner notification technologies for curable sexually transmitted infections (STIs). Secondary data analysis of clinical audit data; systematic reviews of randomised controlled trials (MEDLINE, EMBASE and Cochrane Central Register of Controlled Trials) published from 1 January 1966 to 31 August 2012 and of studies of health-related quality of life (HRQL) [MEDLINE, EMBASE, ISI Web of Knowledge, NHS Economic Evaluation Database (NHS EED), Database of Abstracts of Reviews of Effects (DARE) and Health Technology Assessment (HTA)] published from 1 January 1980 to 31 December 2011; static models of clinical effectiveness and cost-effectiveness; and dynamic modelling studies to improve parameter estimation and examine effectiveness. General population and genitourinary medicine clinic attenders. Heterosexual women and men. Traditional partner notification by patient or provider referral, and new partner notification by expedited partner therapy (EPT) or its UK equivalent, accelerated partner therapy (APT). Population prevalence; index case reinfection; and partners treated per index case. Enhanced partner therapy reduced reinfection in index cases with curable STIs more than simple patient referral [risk ratio (RR) 0.71; 95% confidence interval (CI) 0.56 to 0.89]. There are no randomised trials of APT. The median number of partners treated for chlamydia per index case in UK clinics was 0.60. The number of partners needed to treat to interrupt transmission of chlamydia was lower for casual than for regular partners. In dynamic model simulations, >10% of partners are chlamydia positive with look-back periods of up to 18 months. In the presence of a chlamydia screening programme that reduces population prevalence, treatment of current partners achieves most of the additional reduction in prevalence attributable to partner notification. Dynamic model simulations show that cotesting and treatment for chlamydia and gonorrhoea reduce the prevalence of both STIs. APT has a limited additional effect on prevalence but reduces the rate of index case reinfection. Published quality-adjusted life-year (QALY) weights were of insufficient quality to be used in a cost-effectiveness study of partner notification in this project. Using an intermediate outcome of cost per infection diagnosed, doubling the efficacy of partner notification from 0.4 to 0.8 partners treated per index case was more cost-effective than increasing chlamydia screening coverage. There is evidence to support the improved clinical effectiveness of EPT in reducing index case reinfection. In a general heterosexual population, partner notification identifies new infected cases but the impact on chlamydia prevalence is limited. Partner notification to notify casual partners might have a greater impact than for regular partners in genitourinary clinic populations. Recommendations for future research are (1) to conduct randomised controlled trials using biological outcomes of the effectiveness of APT and of methods to increase testing for human immunodeficiency virus (HIV) and STIs after APT; (2) collection of HRQL data should be a priority to determine QALYs associated with the sequelae of curable STIs; and (3) standardised parameter sets for curable STIs should be developed for mathematical models of STI transmission that are used for policy-making. The National Institute for Health Research Health Technology Assessment programme.

Technology Modeling by Mathematics Professors in Required Courses for Secondary Mathematics Pre-Service Teachers: A Case Study in Two Universities

ERIC Educational Resources Information Center

Asing-Cashman, Joyce G.

2011-01-01

The purpose of this qualitative case study was to examine the modeling of technology by mathematics professors in two universities in teaching required courses for secondary level pre-service mathematics teachers. Six professors participated in this case study. Their responses were documented in pre- and post-interviews and data were gathered from…

Ground control failures. A pictorial view of case studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peng, S.S.

2007-07-01

The book shows, in pictorial views, many forms and/or stages of types of failures in mines, for instance, cutter, roof falls, and cribs. In each case, the year of occurrence is stated in the beginning so that the environment or technological background under which it occurred are reflected. The narrative than begins with the mining and geological conditions, followed by a description of the ground control problems and recommended solutions and results, if any. The sections cover failure of pillars, roof falls, longwall, roof bolting, multiple-seam mining, floor heave, longwall, flooding and weathering of coal, old workings, and shortwall andmore » thin-seam plow longwall.« less

Technology innovations and experience curves for nitrogen oxides control technologies.

PubMed

Yeh, Sonia; Rubin, Edward S; Taylor, Margaret R; Hounshell, David A

2005-12-01

This paper reviews the regulatory history for nitrogen oxides (NOx) pollutant emissions from stationary sources, primarily in coal-fired power plants. Nitrogen dioxide (NO2) is one of the six criteria pollutants regulated by the 1970 Clean Air Act where National Ambient Air Quality Standards were established to protect public health and welfare. We use patent data to show that in the cases of Japan, Germany, and the United States, innovations in NOx control technologies did not occur until stringent government regulations were in place, thus "forcing" innovation. We also demonstrate that reductions in the capital and operation and maintenance (O&M) costs of new generations of high-efficiency NOx control technologies, selective catalytic reduction (SCR), are consistently associated with the increasing adoption of the control technology: the so-called learning-by-doing phenomena. The results show that as cumulative world coal-fired SCR capacity doubles, capital costs decline to approximately 86% and O&M costs to 58% of their original values. The observed changes in SCR technology reflect the impact of technological advance as well as other factors, such as market competition and economies of scale.

3D printing-based minimally invasive cannulated screw treatment of unstable pelvic fracture.

PubMed

Cai, Leyi; Zhang, Yingying; Chen, Chunhui; Lou, Yiting; Guo, Xiaoshan; Wang, Jianshun

2018-04-04

Open reduction and internal fixation of pelvic fractures could restore the stability of the pelvic ring, but there were several problems. Minimally invasive closed reduction cannulated screw treatment of pelvic fractures has lots advantages. However, how to insert the cannulated screw safely and effectively to achieve a reliable fixation were still hard for orthopedist. Our aim was to explore the significance of 3D printing technology as a new method for minimally invasive cannulated screw treatment of unstable pelvic fracture. One hundred thirty-seven patients with unstable pelvic fractures from 2014 to 2016 were retrospectively analyzed. Based on the usage of 3D printing technology for preoperative simulation surgery, they were assigned to 3D printing group (n = 65) and control group (n = 72), respectively. These two groups were assessed in terms of operative time, intraoperative fluoroscopy, postoperative reduction effect, fracture healing time, and follow-up function. The effect of 3D printing technology was evaluated through minimally invasive cannulated screw treatment. There was no significant difference in these two groups with respect to general conditions, such as age, gender, fracture type, time from injury to operation, injury cause, and combined injury. Length of surgery and average number of fluoroscopies were statistically different for 3D printing group and the control group (p < 0.01), i.e., 58.6 vs. 72.3 min and 29.3 vs. 37 min, respectively. Using the Matta radiological scoring systems, the reduction was scored excellent in 21/65 cases (32.3%) and good in 30/65 cases (46.2%) for the 3D printing group, versus 22/72 cases (30.6%) scored as excellent and 36/72 cases (50%) as good for the control group. On the other hand, using the Majeed functional scoring criteria, there were 27/65 (41.5%) excellent and 26/65 (40%) good cases for the 3D printing group in comparison to 30/72 (41.7%) and 28/72 (38.9%) cases for the control group, respectively. This suggests no significant difference between these two groups about the function outcomes. Full reduction and proper fixation of the pelvic ring and reconstruction of anatomical morphology are of great significance to patients' early functional exercise and for the reduction of long-term complications. This retrospective study has demonstrated the 3D printing technology as a potential approach for improving the diagnosis and treatment of pelvic fractures. The study was retrospectively registered at the Chinese Clinical Trial Registry, number: ChiCTR-TRC-17012798, trial registration date: 26 Sept. 2017.

Managing burn wounds with SMARTPORE Technology polyurethane foam: two case reports.

PubMed

Imran, Farrah-Hani; Karim, Rahamah; Maat, Noor Hidayah

2016-05-12

Successful wound healing depends on various factors, including exudate control, prevention of microbial contaminants, and moisture balance. We report two cases of managing burn wounds with SMARTPORE Technology polyurethane foam dressing. In Case 1, a 2-year-old Asian girl presented with a delayed (11 days) wound on her right leg. She sustained a thermal injury from a hot iron that was left idle on the floor. Clinical inspection revealed an infected wound with overlying eschar that traversed her knee joint. As her parents refused surgical debridement under general anesthesia, hydrotherapy and wound dressing using SMARTPORE Technology Polyurethane foam were used. Despite the delay in presentation of this linear thermal pediatric burn injury that crossed the knee joint, the patient's response to treatment and its outcome were highly encouraging. She was cooperative and tolerated each dressing change without the need of supplemental analgesia. Her wound was healed by 24 days post-admission. In Case 2, a 25-year-old Asian man presented with a mixed thickness thermal flame burn on his left leg. On examination, the injury was a mix of deep and superficial partial thickness burn, comprising approximately 3% of his total body surface area. SMARTPORE Technology polyurethane foam was used on his wound; his response to the treatment was very encouraging as the dressing facilitated physiotherapy and mobility. The patient rated the pain during dressing change as 2 on a scale of 10 and his pain score remained the same in every subsequent change. His wound showed evidence of epithelialization by day 7 post-burn. There were no adverse events reported. Managing burn wounds with SMARTPORE Technology polyurethane foam resulted in reduced pain during dressing changes and the successful healing of partial and mixed thickness wounds. The use of SMARTPORE Technology polyurethane foam dressings showed encouraging results and requires further research as a desirable management option in burn wounds.

Abstracts of Remediation Case Studies, Volume 9

EPA Pesticide Factsheets

This report, published by the Federal Remediation Technologies Roundtable (FRTR), is a collection of recently published abstracts summarizing 13 cost and performance case studies on the use of remediation technologies at contaminated sites.

Student learning outcomes associated with video vs. paper cases in a public health dentistry course.

PubMed

Chi, Donald L; Pickrell, Jacqueline E; Riedy, Christine A

2014-01-01

Educational technologies such as video cases can improve health professions student learning outcomes, but few studies in dentistry have evaluated video-based technologies. The goal of this study was to compare outcomes associated with video and paper cases used in an introductory public health dentistry course. This was a retrospective cohort study with a historical control group. Based on dual coding theory, the authors tested the hypotheses that dental students who received a video case (n=37) would report better affective, cognitive, and overall learning outcomes than students who received a paper case (n=75). One-way ANOVA was used to test the hypotheses across ten cognitive, two affective, and one general assessment measures (α=0.05). Students in the video group reported a significantly higher overall mean effectiveness score than students in the paper group (4.2 and 3.3, respectively; p<0.001). Video cases were also associated with significantly higher mean scores across the remaining twelve measures and were effective in helping students achieve cognitive (e.g., facilitating good discussions, identifying public health problems, realizing how health disparities might impact their future role as dentists) and affective (e.g., empathizing with vulnerable individuals, appreciating how health disparities impact real people) goals. Compared to paper cases, video cases significantly improved cognitive, affective, and overall learning outcomes for dental students.

Training to use a commercial brain-computer interface as access technology: a case study.

PubMed

Taherian, Sarvnaz; Selitskiy, Dmitry; Pau, James; Davies, T Claire; Owens, R Glynn

2016-01-01

This case study describes how an individual with spastic quadriplegic cerebral palsy was trained over a period of four weeks to use a commercial electroencephalography (EEG)-based brain-computer interface (BCI). The participant spent three sessions exploring the system, and seven sessions playing a game focused on EEG feedback training of left and right arm motor imagery and a customised, training game paradigm was employed. The participant showed improvement in the production of two distinct EEG patterns. The participant's performance was influenced by motivation, fatigue and concentration. Six weeks post-training the participant could still control the BCI and used this to type a sentence using an augmentative and alternative communication application on a wirelessly linked device. The results from this case study highlight the importance of creating a dynamic, relevant and engaging training environment for BCIs. Implications for Rehabilitation Customising a training paradigm to suit the users' interests can influence adherence to assistive technology training. Mood, fatigue, physical illness and motivation influence the usability of a brain-computer interface. Commercial brain-computer interfaces, which require little set up time, may be used as access technology for individuals with severe disabilities.

Electric energy savings from new technologies. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.

1986-09-01

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for 10 technologies were prepared. The total projected annual savings for the year 2000 for all 10 technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In themore » Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference projection, only 25% of the savings estimated here should be subtracted from the reference projection for analysis purposes.« less

Technology Prompts New Understandings: The Case of Equality

ERIC Educational Resources Information Center

Bardini, Caroline; Oldenburg, Reinhard; Stacey, Kaye; Pierce, Robyn

2013-01-01

Changes to students' understanding of mathematical notation may be brought about by using technology within mathematics. Taking equality as a case study, the paper provides brief epistemological, historical, didactical, and computational reviews of its symbolic representation in pen-and-paper and technology-assisted mathematics, most especially in…

Exploring Organisational Stratification and Technological Pedagogical Change: Cases of Technology Integration Specialists in Hong Kong International Schools

ERIC Educational Resources Information Center

Woo, David James

2015-01-01

An international school may make organisational choices that divide the school by curriculum, grade-level, language and location. This article explores how a school's organisational stratification impacts how the school supports changing teaching and learning practices through technology. The article draws from case data of technology integration…

Infection control: beyond the horizon.

PubMed

Gray, J

2015-04-01

This article will consider possible future directions for innovation and research in infection prevention and control, and will make the case for the importance of including clinical and cost-effectiveness evaluation in such research. Opportunities for studies in a number of broad subject areas will be considered, including prevention and control of existing and emerging infection hazards, the challenges posed by changes in the way that medical care is being delivered, technological developments that could be harnessed for infection prevention and control, how new laboratory diagnostic technologies might benefit infection prevention and control, cleaning and decontamination, and the infection control aspects of hospital design. The need for robust economic data to support the wide and timely implementation of evidence-based practice is emphasized. Copyright © 2014 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

A time-and-motion approach to micro-costing of high-throughput genomic assays

PubMed Central

Costa, S.; Regier, D.A.; Meissner, B.; Cromwell, I.; Ben-Neriah, S.; Chavez, E.; Hung, S.; Steidl, C.; Scott, D.W.; Marra, M.A.; Peacock, S.J.; Connors, J.M.

2016-01-01

Background Genomic technologies are increasingly used to guide clinical decision-making in cancer control. Economic evidence about the cost-effectiveness of genomic technologies is limited, in part because of a lack of published comprehensive cost estimates. In the present micro-costing study, we used a time-and-motion approach to derive cost estimates for 3 genomic assays and processes—digital gene expression profiling (gep), fluorescence in situ hybridization (fish), and targeted capture sequencing, including bioinformatics analysis—in the context of lymphoma patient management. Methods The setting for the study was the Department of Lymphoid Cancer Research laboratory at the BC Cancer Agency in Vancouver, British Columbia. Mean per-case hands-on time and resource measurements were determined from a series of direct observations of each assay. Per-case cost estimates were calculated using a bottom-up costing approach, with labour, capital and equipment, supplies and reagents, and overhead costs included. Results The most labour-intensive assay was found to be fish at 258.2 minutes per case, followed by targeted capture sequencing (124.1 minutes per case) and digital gep (14.9 minutes per case). Based on a historical case throughput of 180 cases annually, the mean per-case cost (2014 Canadian dollars) was estimated to be $1,029.16 for targeted capture sequencing and bioinformatics analysis, $596.60 for fish, and $898.35 for digital gep with an 807-gene code set. Conclusions With the growing emphasis on personalized approaches to cancer management, the need for economic evaluations of high-throughput genomic assays is increasing. Through economic modelling and budget-impact analyses, the cost estimates presented here can be used to inform priority-setting decisions about the implementation of such assays in clinical practice. PMID:27803594

Biological control of weeds: research by the United States Department of Agriculture-Agricultural Research Service: selected case studies.

PubMed

Quimby, Paul C; DeLoach, C Jack; Wineriter, Susan A; Goolsby, John A; Sobhian, Rouhollah; Boyette, C Douglas; Abbas, Hamed K

2003-01-01

Research by the USDA-Agricultural Research Service (ARS) on biological control of weeds has been practiced for many years because of its inherent ecological and economic advantages. Today, it is further driven by ARS adherence to Presidential Executive Order 13112 (3 February 1999) on invasive species and to USDA-ARS policy toward developing technology in support of sustainable agriculture with reduced dependence on non-renewable petrochemical resources. This paper reports examples or case studies selected to demonstrate the traditional or classical approach for biological control programs using Old World arthropods against Tamarix spp, Melaleuca quinquenervia (Cav) ST Blake and Galium spurium L/G aparine L, and the augmentative approach with a native plant pathogen against Pueraria lobata Ohwi = P montana. The examples illustrated various conflicts of interest with endangered species and ecological complexities of arthropods with associated microbes such as nematodes.

Candidate CDTI procedures study

NASA Technical Reports Server (NTRS)

Ace, R. E.

1981-01-01

A concept with potential for increasing airspace capacity by involving the pilot in the separation control loop is discussed. Some candidate options are presented. Both enroute and terminal area procedures are considered and, in many cases, a technologically advanced Air Traffic Control structure is assumed. Minimum display characteristics recommended for each of the described procedures are presented. Recommended sequencing of the operational testing of each of the candidate procedures is presented.

NDE measurements for understanding of performance: A few case studies on engineering components, human health and cultural heritage

NASA Astrophysics Data System (ADS)

Raj, Baldev; Venkatraman, B.

2013-01-01

Life cycle management involves a seamless integration of materials, design, analysis, production, manufacturing, and degradation plus, a wide variety of disciplines relating to surveillance and characterisation with adequate feedback and control. Science and technology of non-destructive evaluation (NDE) links all these domains and disciplines together in a seamless and robust manner. A number of research programs on NDE science and technology have evolved during the last four decades world over including the one at Indira Gandhi Centre for Atomic Research, Kalpakkam, initiated and nurtured by the first author. Many engineering and technology challenges pertaining to fast spectrum reactors have been successfully solved by this Centre through development of innovative sensors, procedures and coupled with strong basic science and modeling approaches. These technologies have also been selectively applied in gaining insights of human health and cultural heritage. This paper highlights some of the innovative NDE sensors and techniques developed in the field of electromagnetic NDE and their successful applications. A few interesting case studies pertaining to NDE in heritage and healthcare using acoustic and thermal methods are also presented.

Performance factors of mobile rich media job aids for community health workers

PubMed Central

Florez-Arango, Jose F; Dunn, Kim; Zhang, Jiajie

2011-01-01

Objective To study and analyze the possible benefits on performance of community health workers using point-of-care clinical guidelines implemented as interactive rich media job aids on small-format mobile platforms. Design A crossover study with one intervention (rich media job aids) and one control (traditional job aids), two periods, with 50 community health workers, each subject solving a total 15 standardized cases per period per period (30 cases in total per subject). Measurements Error rate per case and task, protocol compliance. Results A total of 1394 cases were evaluated. Intervention reduces errors by an average of 33.15% (p=0.001) and increases protocol compliance 30.18% (p<0.001). Limitations Medical cases were presented on human patient simulators in a laboratory setting, not on real patients. Conclusion These results indicate encouraging prospects for mHealth technologies in general, and the use of rich media clinical guidelines on cell phones in particular, for the improvement of community health worker performance in developing countries. PMID:21292702

Performance factors of mobile rich media job aids for community health workers.

PubMed

Florez-Arango, Jose F; Iyengar, M Sriram; Dunn, Kim; Zhang, Jiajie

2011-01-01

To study and analyze the possible benefits on performance of community health workers using point-of-care clinical guidelines implemented as interactive rich media job aids on small-format mobile platforms. A crossover study with one intervention (rich media job aids) and one control (traditional job aids), two periods, with 50 community health workers, each subject solving a total 15 standardized cases per period per period (30 cases in total per subject). Error rate per case and task, protocol compliance. A total of 1394 cases were evaluated. Intervention reduces errors by an average of 33.15% (p = 0.001) and increases protocol compliance 30.18% (p < 0.001). Limitations Medical cases were presented on human patient simulators in a laboratory setting, not on real patients. These results indicate encouraging prospects for mHealth technologies in general, and the use of rich media clinical guidelines on cell phones in particular, for the improvement of community health worker performance in developing countries.

Software life cycle methodologies and environments

NASA Technical Reports Server (NTRS)

Fridge, Ernest

1991-01-01

Products of this project will significantly improve the quality and productivity of Space Station Freedom Program software processes by: improving software reliability and safety; and broadening the range of problems that can be solved with computational solutions. Projects brings in Computer Aided Software Engineering (CASE) technology for: Environments such as Engineering Script Language/Parts Composition System (ESL/PCS) application generator, Intelligent User Interface for cost avoidance in setting up operational computer runs, Framework programmable platform for defining process and software development work flow control, Process for bringing CASE technology into an organization's culture, and CLIPS/CLIPS Ada language for developing expert systems; and methodologies such as Method for developing fault tolerant, distributed systems and a method for developing systems for common sense reasoning and for solving expert systems problems when only approximate truths are known.

The Race Idea in Reproductive Technologies: Beyond Epistemic Scientism and Technological Mastery.

PubMed

Russell, Camisha

2015-12-01

This paper explores the limitations of epistemic scientism for understanding the role the concept of race plays in assisted reproductive technology (ART) practices. Two major limitations centre around the desire to use scientific knowledge to bring about social improvement. In the first case, undue focus is placed on debunking the scientific reality of racial categories and characteristics. The alternative to this approach is to focus instead on the way the race idea functions in ART practices. Doing so reveals how the race idea (1) helps to define the reproductive "problems" different groups of women are experiencing and to dictate when and how they should be "helped"; (2) helps to resolve tensions about who should be considered the real parents of children produced by reproductive technologies; and (3) is used to limit ART use where that use threatens to denaturalize the very sociopolitical landscape the race idea has created. In the second case, scientific knowledge regarding reproduction is thought to call for technological control over that reproduction. This leads to an overemphasis on personal responsibility and a depoliticization of racialized social inequalities.

[A skin cell segregating control system based on PC].

PubMed

Liu, Wen-zhong; Zhou, Ming; Zhang, Hong-bing

2005-11-01

A skin cell segregating control system based on PC (personal computer) is presented in this paper. Its front controller is a single-chip microcomputer which enables the manipulation for 6 patients simultaneously, and thus provides a great convenience for clinical treatments for vitiligo. With the use of serial port communication technology, it's possible to monitor and control the front controller in a PC terminal. And the application of computer image acquisition technology realizes the synchronous acquisition of pathologic shin cell images pre/after the operation and a case history. Clinical tests prove its conformity with national standards and the pre-set technological requirements.

The MOBI-Kids Study Protocol: Challenges in Assessing Childhood and Adolescent Exposure to Electromagnetic Fields from Wireless Telecommunication Technologies and Possible Association with Brain Tumor Risk.

PubMed

Sadetzki, Siegal; Langer, Chelsea Eastman; Bruchim, Revital; Kundi, Michael; Merletti, Franco; Vermeulen, Roel; Kromhout, Hans; Lee, Ae-Kyoung; Maslanyj, Myron; Sim, Malcolm R; Taki, Masao; Wiart, Joe; Armstrong, Bruce; Milne, Elizabeth; Benke, Geza; Schattner, Rosa; Hutter, Hans-Peter; Woehrer, Adelheid; Krewski, Daniel; Mohipp, Charmaine; Momoli, Franco; Ritvo, Paul; Spinelli, John; Lacour, Brigitte; Delmas, Dominique; Remen, Thomas; Radon, Katja; Weinmann, Tobias; Klostermann, Swaantje; Heinrich, Sabine; Petridou, Eleni; Bouka, Evdoxia; Panagopoulou, Paraskevi; Dikshit, Rajesh; Nagrani, Rajini; Even-Nir, Hadas; Chetrit, Angela; Maule, Milena; Migliore, Enrica; Filippini, Graziella; Miligi, Lucia; Mattioli, Stefano; Yamaguchi, Naohito; Kojimahara, Noriko; Ha, Mina; Choi, Kyung-Hwa; Mannetje, Andrea 't; Eng, Amanda; Woodward, Alistair; Carretero, Gema; Alguacil, Juan; Aragones, Nuria; Suare-Varela, Maria Morales; Goedhart, Geertje; Schouten-van Meeteren, A Antoinette Y N; Reedijk, A Ardine M J; Cardis, Elisabeth

2014-01-01

The rapid increase in mobile phone use in young people has generated concern about possible health effects of exposure to radiofrequency (RF) and extremely low frequency (ELF) electromagnetic fields (EMF). MOBI-Kids, a multinational case-control study, investigates the potential effects of childhood and adolescent exposure to EMF from mobile communications technologies on brain tumor risk in 14 countries. The study, which aims to include approximately 1,000 brain tumor cases aged 10-24 years and two individually matched controls for each case, follows a common protocol and builds upon the methodological experience of the INTERPHONE study. The design and conduct of a study on EMF exposure and brain tumor risk in young people in a large number of countries is complex and poses methodological challenges. This manuscript discusses the design of MOBI-Kids and describes the challenges and approaches chosen to address them, including: (1) the choice of controls operated for suspected appendicitis, to reduce potential selection bias related to low response rates among population controls; (2) investigating a young study population spanning a relatively wide age range; (3) conducting a large, multinational epidemiological study, while adhering to increasingly stricter ethics requirements; (4) investigating a rare and potentially fatal disease; and (5) assessing exposure to EMF from communication technologies. Our experience in thus far developing and implementing the study protocol indicates that MOBI-Kids is feasible and will generate results that will contribute to the understanding of potential brain tumor risks associated with use of mobile phones and other wireless communications technologies among young people.

An evaluation of the discriminating power of an Integrated Ballistics Identification System® Heritage™system with the NIST standard cartridge case (Standard Reference Material 2461).

PubMed

Morris, Keith B; Law, Eric F; Jefferys, Roger L; Dearth, Elizabeth C; Fabyanic, Emily B

2017-11-01

Through analysis and comparison of firing pin, breech face, and ejector impressions, where appropriate, firearm examiners may connect a cartridge case to a suspect firearm with a certain likelihood in a criminal investigation. When a firearm is not present, an examiner may use the Integrated Ballistics Identification System (IBIS ® ), an automated search and retrieval system coupled with the National Integrated Ballistics Information Network (NIBIN), a database of images showing the markings on fired cartridge cases and bullets from crime scenes along with test fired firearms. For the purpose of measurement quality control of these IBIS ® systems the National Institute of Standards and Technology (NIST) initiated the Standard Reference Material (SRM) 2460/2461 standard bullets and cartridge cases project. The aim of this study was to evaluate the overall performance of the IBIS ® system by using NIST standard cartridge cases. By evaluating the resulting correlation scores, error rates, and percent recovery, both the variability between and within examiners when using IBIS ® , in addition to any inter- and intra-variability between SRM cartridge cases was observed. Copyright © 2017 Elsevier B.V. All rights reserved.

Computer Chips and Paper Clips. Technology and Women's Employment. Volume II. Case Studies and Policy Perspectives.

ERIC Educational Resources Information Center

Hartmann, Heidi I., Ed.; And Others

This volume contains 12 papers commissioned by the Panel on Technology and Women's Employment. "Technology, Women, and Work: Policy Perspectives" (Eli Ginzberg) is an overview that provides a context for the volume. The four case studies in Part II describe the impact of information technology in the insurance industry, among bookkeepers, among…

Automation and Mankind

DTIC Science & Technology

1960-08-07

limited by the cap- abilities of the human organism in the matter of control of its processes. In our time, the speeds of technological processes are...in many cases limited by conditions of control. The speed of human reaction is limited and therefore, at pre- sent, only processes of a relatively...forwiard, It can e foreseer thast automIation will comp~letely free Mans -Pn work unler conlitions’ of high texpemratures pressures,, anid nollutA-: or

Chemical technology for the toxic gas flow control through process water system.

PubMed

Broussard, G; Bramanti, O; Salvatore, A; Marchese, F M

2001-01-01

The aim of this work is focused on the safety and toxicological aspects due to under-pressure industrial plant management, above all in the case which the gas is very dangerous for human health and environment. Here is illustrated the safe method of control of risks through specific choices of engineering devices and chemical process: in this way we have shown the mathematical calculation regarding the case of ammonia flow gas running in the piping and plant under-pressure. In this paper the Authors show the assessment of the technological solution for falling down of a toxic gas as NH3, which lets off from safety values facilities. The under pressure industrial plants with ammonia are protected through the safety valves, settled at 20 bar pressure. The out-let gas flow is capted by a tank of a water bulk of five time theoretical water amount necessary to the complete absorption of gas. In order to prevent any health risk and carry out a safety management, it needs to verify two basic aspects, with connected specific techniques: 1. The safety valves technology through the mathematical calculation of operating device; 2. The absorption process of the toxic agent for controlling of dangerous runaway of gas.

Efficacy of a virtual assistance-based lifestyle intervention in reducing risk factors for Type 2 diabetes in young employees in the information technology industry in India: LIMIT, a randomized controlled trial.

PubMed

Limaye, T; Kumaran, K; Joglekar, C; Bhat, D; Kulkarni, R; Nanivadekar, A; Yajnik, C

2017-04-01

To investigate a virtual assistance-based lifestyle intervention to reduce risk factors for Type 2 diabetes in young employees in the information technology industry in India. LIMIT (Lifestyle Modification in Information Technology) was a parallel-group, partially blinded, randomized controlled trial. Employees in the information technology industry with ≥3 risk factors (family history of cardiometabolic disease, overweight/obesity, high blood pressure, impaired fasting glucose, hypertriglyceridaemia, high LDL cholesterol and low HDL cholesterol) from two industries were randomized to a control or an intervention (1:1) group. After initial lifestyle advice, the intervention group additionally received reinforcement through mobile phone messages (three per week) and e-mails (two per week) for 1 year. The primary outcome was change in prevalence of overweight/obesity, analysed by intention to treat. Of 437 employees screened (mean age 36.2 ± 9.3 years; 74.8% men), 265 (61.0%) were eligible and randomized into control (n=132) or intervention (n=133) group. After 1 year, the prevalence of overweight/obesity reduced by 6.0% in the intervention group and increased by 6.8% in the control group (risk difference 11.2%; 95% CI 1.2-21.1; P=0.042). There were also significant improvements in lifestyle measurements, waist circumference, and total and LDL cholesterol in the intervention group. The number-needed-to-treat to prevent one case of overweight/obesity in 1 year was 9 (95% CI 5-82), with an incremental cost of INR10665 (£112.30) per case treated/prevented. A total of 98% of participants found the intervention acceptable. A virtual assistance-based lifestyle intervention was effective, cost-effective and acceptable in reducing risk factors for diabetes in young employees in the information technology industry, and is potentially scalable. © 2016 Diabetes UK.

Advanced Video Technology for Safe and Efficient Surgical Operating Rooms

DTIC Science & Technology

2005-03-01

should be easy to integrate into the system by non-technical personnel. " Disruptive Technologies - Such technologies can have both positive and negative...integrate new, emerging, and otherwise " disruptive technologies ." " Medical Manufacturer Markups - In some cases, potential vendor pricing of...POSITIVE disruptive technologies as they would, in some cases, eliminate the need for monitor screens. NETWORK BANDWIDTH j% J a The System must be able to

Evidence of Recessive Alzheimer Disease Loci in a Caribbean Hispanic Data Set

PubMed Central

Ghani, Mahdi; Sato, Christine; Lee, Joseph H.; Reitz, Christiane; Moreno, Danielle; Mayeux, Richard; St George-Hyslop, Peter; Rogaeva, Ekaterina

2014-01-01

IMPORTANCE The search for novel Alzheimer disease (AD) genes or pathologic mutations within known AD loci is ongoing. The development of array technologies has helped to identify rare recessive mutations among long runs of homozygosity (ROHs), in which both parental alleles are identical. Caribbean Hispanics are known to have an elevated risk for AD and tend to have large families with evidence of inbreeding. OBJECTIVE To test the hypothesis that the late-onset AD in a Caribbean Hispanic population might be explained in part by the homozygosity of unknown loci that could harbor recessive AD risk haplotypes or pathologic mutations. DESIGN We used genome-wide array data to identify ROHs (>1 megabase) and conducted global burden and locus-specific ROH analyses. SETTING A whole-genome case-control ROH study. PARTICIPANTS A Caribbean Hispanic data set of 547 unrelated cases (48.8% with familial AD) and 542 controls collected from a population known to have a 3-fold higher risk of AD vs non-Hispanics in the same community. Based on a Structure program analysis, our data set consisted of African Hispanic (207 cases and 192 controls) and European Hispanic (329 cases and 326 controls) participants. EXPOSURE Alzheimer disease risk genes. MAIN OUTCOMES AND MEASURES We calculated the total and mean lengths of the ROHs per sample. Global burden measurements among autosomal chromosomes were investigated in cases vs controls. Pools of overlapping ROH segments (consensus regions) were identified, and the case to control ratio was calculated for each consensus region. We formulated the tested hypothesis before data collection. RESULTS In total, we identified 17 137 autosomal regions with ROHs. The mean length of the ROH per person was significantly greater in cases vs controls (P = .0039), and this association was stronger with familial AD (P = .0005). Among the European Hispanics, a consensus region at the EXOC4 locus was significantly associated with AD even after correction for multiple testing (empirical P value 1 [EMP1], .0001; EMP2, .002; 21 AD cases vs 2 controls). Among the African Hispanic subset, the most significant but nominal association was observed for CTNNA3, a well-known AD gene candidate (EMP1, .002; 10 AD cases vs 0 controls). CONCLUSIONS AND RELEVANCE Our results show that ROHs could significantly contribute to the etiology of AD. Future studies would require the analysis of larger, relatively inbred data sets that might reveal novel recessive AD genes. The next step is to conduct sequencing of top significant loci in a subset of samples with overlapping ROHs. PMID:23978990

Adaptive neural network motion control for aircraft under uncertainty conditions

NASA Astrophysics Data System (ADS)

Efremov, A. V.; Tiaglik, M. S.; Tiumentsev, Yu V.

2018-02-01

We need to provide motion control of modern and advanced aircraft under diverse uncertainty conditions. This problem can be solved by using adaptive control laws. We carry out an analysis of the capabilities of these laws for such adaptive systems as MRAC (Model Reference Adaptive Control) and MPC (Model Predictive Control). In the case of a nonlinear control object, the most efficient solution to the adaptive control problem is the use of neural network technologies. These technologies are suitable for the development of both a control object model and a control law for the object. The approximate nature of the ANN model was taken into account by introducing additional compensating feedback into the control system. The capabilities of adaptive control laws under uncertainty in the source data are considered. We also conduct simulations to assess the contribution of adaptivity to the behavior of the system.

[The case-case-time-control study design].

PubMed

Wang, Jing; Zhuo, Lin; Zhan, Siyan

2014-12-01

Although the 'self-matched case-only studies' (such as the case-cross-over or self-controlled case-series method) can control the time-invariant confounders (measured or unmeasured) through design of the study, however, they can not control those confounders that vary with time. A bidirectional case-crossover design can be used to adjust the exposure-time trends. In the areas of pharmaco-epidemiology, illness often influence the future use of medications, making a bidirectional study design problematic. Suissa's case-time-control design combines the case-crossover and the case-control design which could adjust for exposure-trend bias, but the control group may reintroduce selection bias, if the matching does not go well. We propose a "case-case-time-control" design which is an extension of the case-time-control design. However, rather than using a sample of external controls, we choose those future cases as controls for current cases to counter the bias that arising from temporal trends caused by exposure to the target of interest. In the end of this article we will discuss the strength and limitations of this design based on an applied example.

Human health tradeoffs in wellhead drinking water treatment: Comparing exposure reduction to embedded life cycle risks.

PubMed

Gifford, Mac; Chester, Mikhail; Hristovski, Kiril; Westerhoff, Paul

2018-01-01

Treatment of drinking water decreases human health risks by reducing pollutants, but the required materials, chemicals, and energy emit pollutants and increase health risks. We explored human carcinogenic and non-carcinogenic disease tradeoffs of water treatment by comparing pollutant dose-response curves against life cycle burden using USEtox methodology. An illustrative wellhead sorbent groundwater treatment system removing hexavalent chromium or pentavalent arsenic serving 3200 people was studied. Reducing pollutant concentrations in drinking water from 20 μg L -1 to 10 μg L -1 avoided 37 potential cancer cases and 64 potential non-cancer disease cases. Human carcinogenicity embedded in treatment was 0.2-5.3 cases, and non-carcinogenic toxicity was 0.2-14.3 cases, depending on technology and degree of treatment. Embedded toxicity impacts from treating Cr(VI) using strong-base anion exchange were <10% of those from using weak base anion exchange. Acidification and neutralization contributed >90% of the toxicity impacts for treatment options requiring pH control. In scenarios where benefits exceeded burdens, tradeoffs still existed. Benefits are experienced by a local population but burdens are born externally where the materials and energy are produced, thus exporting the health risks. Even when burdens clearly exceeded benefits, cost considerations may still drive selecting a detrimental treatment level or technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

On a model of the processes of maintaining a technological area by a manipulator

NASA Astrophysics Data System (ADS)

Ghukasyan, A. A.; Ordyan, A. Ya

2018-04-01

The research refers to the results of mathematical modeling of the process of maintaining a technological area which consists of unstable or fixed objects (targets) and a controlled multi-link manipulator [1–9]. It is assumed that, in the maintenance process, the dynamic characteristics and the phase vector of the manipulator state can change at certain finite times depending on the mass of the cargo or instrument [10, 11]. Some controllability problems are investigated in the case where the manipulator motion on each maintenance interval is described by linear differential equations with constant coefficients and the motions of the objects are given.

Technology Solutions Case Study: Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-09-01

In multifamily building hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water temperature and flow levels, and owner/occupant interaction with the boilers, distribution and controls. The effects of imbalance include tenant discomfort, higher energy use intensity and inefficient building operation. In this case study , Partnership for Advanced Residential Retrofit and Elevate Energy. explores cost-effective distribution upgrades and balancing measures in multifamily hydronic systems, providing a resource to contractors, auditors, and building owners on best practices to improve tenant comfort and lower operating costs.

Evaluating hospital design from an operations management perspective.

PubMed

Vos, Leti; Groothuis, Siebren; van Merode, Godefridus G

2007-12-01

This paper describes an evaluation method for the assessment of hospital building design from the viewpoint of operations management to assure that the building design supports the efficient and effective operating of care processes now and in the future. The different steps of the method are illustrated by a case study. In the case study an experimental design is applied to assess the effect of used logistical concepts, patient mix and technologies. The study shows that the evaluation method provides a valuable tool for the assessment of both functionality and the ability to meet future developments in operational control of a building design.

Access to augmentative and alternative communication: new technologies and clinical decision-making.

PubMed

Fager, Susan; Bardach, Lisa; Russell, Susanne; Higginbotham, Jeff

2012-01-01

Children with severe physical impairments require a variety of access options to augmentative and alternative communication (AAC) and computer technology. Access technologies have continued to develop, allowing children with severe motor control impairments greater independence and access to communication. This article will highlight new advances in access technology, including eye and head tracking, scanning, and access to mainstream technology, as well as discuss future advances. Considerations for clinical decision-making and implementation of these technologies will be presented along with case illustrations.

Integration of Laser Scanning and Three-dimensional Models in the Legal Process Following an Industrial Accident.

PubMed

Eyre, Matthew; Foster, Patrick; Speake, Georgina; Coggan, John

2017-09-01

In order to obtain a deeper understanding of an incident, it needs to be investigated to "peel back the layers" and examine both immediate and underlying failures that contributed to the event itself. One of the key elements of an effective accident investigation is recording the scene for future reference. In recent years, however, there have been major advances in survey technology, which have provided the ability to capture scenes in three dimension to an unprecedented level of detail, using laser scanners. A case study involving a fatal incident was surveyed using three-dimensional laser scanning, and subsequently recreated through virtual and physical models. The created models were then utilized in both accident investigation and legal process, to explore the technologies used in this setting. Benefits include explanation of the event and environment, incident reconstruction, preservation of evidence, reducing the need for site visits, and testing of theories. Drawbacks include limited technology within courtrooms, confusion caused by models, cost, and personal interpretation and acceptance in the data. Laser scanning surveys can be of considerable use in jury trials, for example, in case the location supports the use of a high-definition survey, or an object has to be altered after the accident and it has a specific influence on the case and needs to be recorded. However, consideration has to be made in its application and to ensure a fair trial, with emphasis being placed on the facts of the case and personal interpretation controlled.

A Qualitative Case Study of Smartphone-Connected Hearing Aids: Influences on Patients, Clinicians, and Patient-Clinician Interactions.

PubMed

Ng, Stella L; Phelan, Shanon; Leonard, MaryAnn; Galster, Jason

2017-06-01

Innovations in hearing aid technology influence clinicians and individuals who use hearing aids. Little research, to date, explains the innovation adoption experiences and perspectives of clinicians and patients, which matter to a field like audiology, wherein technology innovation is constant. By understanding clinician and patient experiences with such innovations, the field of audiology may develop technologies and ways of practicing in a manner more responsive to patients' needs, and attentive to society's influence. The authors aimed to understand how new innovations influence clinician and patient experiences, through a study focusing on connected hearing aids. "Connected" refers to the wireless functional connection of hearing aids with everyday technologies like mobile phones and tablets. The authors used a qualitative collective case study methodology, borrowing from constructivist grounded theory for data collection and analysis methods. Specifically, the authors designed a collective case study of a connected hearing aid and smartphone application, composed of two cases of experience with the innovation: the case of clinician experiences, and the case of patient experiences. The qualitative sampling methods employed were case sampling, purposive within-case sampling, and theoretical sampling, and culminated in a total collective case n = 19 (clinician case n = 8; patient case n = 11). These data were triangulated with a supplementary sample of ten documents: relevant news and popular media collected during the study time frame. The authors conducted interviews with the patients and clinicians, and analyzed the interview and document data using the constant comparative method. The authors compared their two cases by looking at trends within, between, and across cases. The clinician case highlighted clinicians' heuristic-based candidacy judgments in response to the adoption of the connected hearing aids into their practice. The patient case revealed patients' perceptions of themselves as technologically competent or incompetent, and descriptions of how they learned to use the new technology. Between cases, the study found a difference in the response to how the connected hearing aid changed the clinician-patient relationship. While clinicians valued the increased time they spent "getting to know" their patients, patients experienced some frustration specific to the additional troubleshooting related to Bluetooth connectivity. Across cases, there was a resounding theme of "normalization" of hearing aids via their integration with a "normal" technology (mobile phones) and general lack of concern about privacy in relation to the smartphone application and its tracking and geotagging features. Both audiologists and patients credited the connected hearing aids with increased opportunities to participate more fully in everyday life. The introduction of smartphone-connected hearing aids influenced the identities and candidate profiles of hearing aid users, and the nature of time spent in clinical interactions, in important and interesting ways. The influence of connected hearing aids on patient experience and audiology practice calls for continued research and clinical consideration, with implications for clinical decision-making regarding hearing aid candidacy. Further study should look critically at normalization and possible unintended stigmatizing effects of making hearing aids increasingly discreet. American Academy of Audiology

Environmental Technology Verification (ETV) Program Case Studies: Demonstrating Program Outcomes, Volume III

EPA Science Inventory

This booklet, ETV Program Case Studies: Demonstrating Program Outcomes, Volume III contains two case studies, addressing verified environmental technologies for decentalized wastewater treatment and converting animal waste to energy. Each case study contains a brief description ...

40 CFR 63.150 - Emissions averaging provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Group 1 emission points to which the reference control technology (defined in § 63.111 of this subpart... prevention measure is used in conjunction with other controls for a Group 1 emission point, the pollution... which case credit will be allowed only for the increase in control after November 15, 1990. (2) Group 1...

40 CFR 63.150 - Emissions averaging provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Group 1 emission points to which the reference control technology (defined in § 63.111 of this subpart... prevention measure is used in conjunction with other controls for a Group 1 emission point, the pollution... which case credit will be allowed only for the increase in control after November 15, 1990. (2) Group 1...

40 CFR 63.150 - Emissions averaging provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Group 1 emission points to which the reference control technology (defined in § 63.111 of this subpart... prevention measure is used in conjunction with other controls for a Group 1 emission point, the pollution... which case credit will be allowed only for the increase in control after November 15, 1990. (2) Group 1...

40 CFR 63.150 - Emissions averaging provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Group 1 emission points to which the reference control technology (defined in § 63.111 of this subpart... prevention measure is used in conjunction with other controls for a Group 1 emission point, the pollution... which case credit will be allowed only for the increase in control after November 15, 1990. (2) Group 1...

40 CFR 63.150 - Emissions averaging provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Group 1 emission points to which the reference control technology (defined in § 63.111 of this subpart... prevention measure is used in conjunction with other controls for a Group 1 emission point, the pollution... which case credit will be allowed only for the increase in control after November 15, 1990. (2) Group 1...

Attaining Visual Literacy Using Simplified Graphics in Industry.

ERIC Educational Resources Information Center

Burton, Terry

In the current milieu of ISO 9000 certification, just-in-time engineering (JIT), demand flow technology (DFT), and total quality management (TQM), industry is attempting to implement available technology for the creation, control, and delivery of documentation. In most cases, their efforts are in need of outside resources to analyze, develop,…

Emergent Legal Definitions of Parentage in Assisted Reproductive Technology

ERIC Educational Resources Information Center

Robinson, Cherylon; Miller, Michael V.

2004-01-01

State statutes and court cases involving Assisted Reproductive Technology (ART) are examined to determine legal definitions of father and mother. While traditional definitions are not disturbed overall by statutes and cases involving use of artificial insemination by donor among married couples, complications and disputes between parties involved…

Air Force Organizational Adoption of Remotely Piloted Vehicles

DTIC Science & Technology

2004-05-01

organization that employs them. On the other hand, disruptive technologies are consistent with RMAs, eliminating a fundamental ability that provides...the idea of sustaining and disruptive technologies . An extensive case study of the disk drive industry details some key but often overlooked...characteristics of disruptive technology. A total of 116 cases of new technologies were studied with four of the cases involving disruptive technologies . In

Gas Engine-Driven Heat Pump with Desiccant Dehumidification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Bo; Abu-Heiba, Ahmad

About 40% of total U.S. energy consumption was consumed in residential and commercial buildings. Improved air-conditioning technology has by far the greatest potential impact on the electric industry compared to any other technology that uses electricity. This paper describes the development of an innovative natural gas, propane, LNG or bio-gas IC engine-driven heat pump (GHP) with desiccant dehumidification (GHP/DD). This integrated system has higher overall efficiencies than conventional equipment for space cooling, addresses both new and existing commercial buildings, and more effectively controls humidity in humid areas. Waste heat is recovered from the GHP to provide energy for regenerating themore » desiccant wheel and to augment heating capacity and efficiency. By combining the two technologies, an overall source COP of greater that 1.5 (hot, humid case) can be achieved by utilizing waste heat from the engine to reduce the overall energy required to regenerate the desiccant. Moreover, system modeling results show that the sensible heat ratio (SHR- sensible heat ratio) can be lowered to less 60% in a dedicated outdoor air system application with hot, humid cases.« less

Changing Lives: The Case for Women-Only Vocational Technology Training Revisited

ERIC Educational Resources Information Center

Rommes, Els; Faulkner, Wendy; Van Slooten, Irma

2005-01-01

Women-only vocational courses in technology, which became popular across Western Europe during the 1980s, had fallen from fashion by 2000. Yet the need for such courses remains, at least in certain circumstances. Drawing on case studies of two women-only courses in information and communications technology (ICT), from the Netherlands and Scotland,…

Supporting Case-Based Learning in Information Security with Web-Based Technology

ERIC Educational Resources Information Center

He, Wu; Yuan, Xiaohong; Yang, Li

2013-01-01

Case-based learning has been widely used in many disciplines. As an effective pedagogical method, case-based learning is also being used to support teaching and learning in the domain of information security. In this paper, we demonstrate case-based learning in information security by sharing our experiences in using a case study to teach security…

A model for choosing an automated ultraviolet-C disinfection system and building a case for the C-suite: Two case reports.

PubMed

Spencer, Maureen; Vignari, Michelle; Bryce, Elizabeth; Johnson, Helen Boehm; Fauerbach, Loretta; Graham, Denise

2017-03-01

Environmental disinfection has become the new frontier in the ongoing battle to reduce the risk of health care-associated infections. Evidence demonstrating the persistent contamination of environmental surfaces despite traditional cleaning and disinfection methods has led to the widespread acceptance that there is both a need for reassessing traditional cleaning protocols and for using secondary disinfection technologies. Ultraviolet-C (UV-C) disinfection is one type of no-touch technology shown to be a successful adjunct to manual cleaning in reducing environmental bioburden. The dilemma for the infection preventionist, however, is how to choose the system best suited for their facility among the many UV-C surface disinfection delivery systems available and how to build a case for acquisition to present to the hospital administration/C-suite. This article proposes an approach to these dilemmas based in part on the experience of 2 health care networks. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

[Patented technology status quo and development trend for Chinese herbal medicines].

PubMed

Li, Chang; Huang, Luqi

2009-06-01

Patent technology is regarded as technological trends under the market economy condition. The case showed the information form patent literature can be widely used in technology or economy. In this study, we analyzed the patent technology status quo and development trend for Chinese herbal medicines based on China patent database. The patent technology status quo is divided from the technology of biotechnology, quality control, cultivation and herb processing on Chinese herbal medicines. Furthermore, some recommendations of technology development and advices on patent protection for Chinese herbal medicines were suggested.

Shock Generation and Control Using DBD Plasma Actuators

NASA Technical Reports Server (NTRS)

Patel, Mehul P.; Cain, Alan B.; Nelson, Christopher C.; Corke, Thomas C.; Matlis, Eric H.

2012-01-01

This report is the final report of a NASA Phase I SBIR contract, with some revisions to remove company proprietary data. The Shock Boundary Layer Interaction (SBLI) phenomena in a supersonic inlet involve mutual interaction of oblique shocks with boundary layers, forcing the boundary layer to separate from the inlet wall. To improve the inlet efficiency, it is desired to prevent or delay shock-induced boundary layer separation. In this effort, Innovative Technology Applications Company (ITAC), LLC and the University of Notre Dame (UND) jointly investigated the use of dielectric-barrier-discharge (DBD) plasma actuators for control of SBLI in a supersonic inlet. The research investigated the potential for DBD plasma actuators to suppress flow separation caused by a shock in a turbulent boundary layer. The research involved both numerical and experimental investigations of plasma flow control for a few different SBLI configurations: (a) a 12 wedge flow test case at Mach 1.5 (numerical and experimental), (b) an impinging shock test case at Mach 1.5 using an airfoil as a shock generator (numerical and experimental), and (c) a Mach 2.0 nozzle flow case in a simulated 15 X 15 cm wind tunnel with a shock generator (numerical). Numerical studies were performed for all three test cases to examine the feasibility of plasma flow control concepts. These results were used to guide the wind tunnel experiments conducted on the Mach 1.5 12 degree wedge flow (case a) and the Mach 1.5 impinging shock test case (case b) which were at similar flow conditions as the corresponding numerical studies to obtain experimental evidence of plasma control effects for SBLI control. The experiments also generated data that were used in validating the numerical studies for the baseline cases (without plasma actuators). The experiments were conducted in a Mach 1.5 test section in the University of Notre Dame Hessert Laboratory. The simulation results from cases a and b indicated that multiple spanwise actuators in series and at a voltage of 75 kVp-p could fully suppress the flow separation downstream of the shock. The simulation results from case c showed that the streamwise plasma actuators are highly effective in creating pairs of counter-rotating vortices, much like the mechanical vortex generators, and could also potentially have beneficial effects for SBLI control. However, to achieve these effects, the positioning and the quantity of the DBD actuators used must be optimized. The wind tunnel experiments mapped the baseline flow with good agreement to the numerical simulations. The experimental results were conducted with spanwise actuators for cases a and b, but were limited by the inability to generate a sufficiently high voltage due to arcing in the wind-tunnel test-section. The static pressure in the tunnel was lower than the static pressure in an inlet at flight conditions, promoting arching and degrading the actuator performance.

Use of ``virtual'' field trips in teaching introductory geology

NASA Astrophysics Data System (ADS)

Hurst, Stephen D.

1998-08-01

We designed a series of case studies for Introductory Geology Laboratory courses using computer visualization techniques integrated with traditional laboratory materials. These consist of a comprehensive case study which requires three two-hour long laboratory periods to complete, and several shorter case studies requiring one or two, two-hour laboratory periods. Currently we have prototypes of the Yellowstone National Park, Hawaii volcanoes and the Mid-Atlantic Ridge case studies. The Yellowstone prototype can be used to learn about a wide variety of rocks and minerals, about geothermal activity and hydrology, about volcanic hazards and the hot-spot theory of plate tectonics. The Hawaiian exercise goes into more depth about volcanoes, volcanic rocks and their relationship to plate movements. The Mid-Atlantic Ridge project focuses on formation of new ocean crust and mineral-rich hydrothermal deposits at spreading centers. With new improvements in visualization technology that are making their way to personal computers, we are now closer to the ideal of a "virtual" field trip. We are currently making scenes of field areas in Hawaii and Yellowstone which allow the student to pan around the area and zoom in on interesting objects. Specific rocks in the scene will be able to be "picked up" and studied in three dimensions. This technology improves the ability of the computer to present a realistic simulation of the field area and allows the student to have more control over the presentation. This advanced interactive technology is intuitive to control, relatively cheap and easy to add to existing computer programs and documents.

Economics of infection control surveillance technology: cost-effective or just cost?

PubMed

Furuno, Jon P; Schweizer, Marin L; McGregor, Jessina C; Perencevich, Eli N

2008-04-01

Previous studies have suggested that informatics tools, such as automated alert and decision support systems, may increase the efficiency and quality of infection control surveillance. However, little is known about the cost-effectiveness of these tools. We focus on 2 types of economic analyses that have utility in assessing infection control interventions (cost-effectiveness analysis and business-case analysis) and review the available literature on the economics of computerized infection control surveillance systems. Previous studies on the effectiveness of computerized infection control surveillance have been limited to assessments of whether these tools increase the sensitivity and specificity of surveillance over traditional methods. Furthermore, we identified only 2 studies that assessed the costs associated with computerized infection control surveillance. Thus, it remains unknown whether computerized infection control surveillance systems are cost-effective and whether use of these systems improves patient outcomes. The existing data are insufficient to allow for a summary conclusion on the cost-effectiveness of infection control surveillance technology. All future studies of computerized infection control surveillance systems should aim to collect outcomes and economic data to inform decision making and assist hospitals with completing business-cases analyses.

Cytochrome P450 2E1 gene polymorphisms/haplotypes and anti-tuberculosis drug-induced hepatitis in a Chinese cohort.

PubMed

Tang, Shaowen; Lv, Xiaozhen; Zhang, Yuan; Wu, Shanshan; Yang, Zhirong; Xia, Yinyin; Tu, Dehua; Deng, Peiyuan; Ma, Yu; Chen, Dafang; Zhan, Siyan

2013-01-01

The pathogenic mechanism of anti-tuberculosis (anti-TB) drug-induced hepatitis is associated with drug metabolizing enzymes. No tagging single-nucleotide polymorphisms (tSNPs) of cytochrome P450 2E1(CYP2E1) in the risk of anti-TB drug-induced hepatitis have been reported. The present study was aimed at exploring the role of tSNPs in CYP2E1 gene in a population-based anti-TB treatment cohort. A nested case-control study was designed. Each hepatitis case was 14 matched with controls by age, gender, treatment history, disease severity and drug dosage. The tSNPs were selected by using Haploview 4.2 based on the HapMap database of Han Chinese in Beijing, and detected by using TaqMan allelic discrimination technology. Eighty-nine anti-TB drug-induced hepatitis cases and 356 controls were included in this study. 6 tSNPs (rs2031920, rs2070672, rs915908, rs8192775, rs2515641, rs2515644) were genotyped and minor allele frequencies of these tSNPs were 21.9%, 23.0%, 19.1%, 23.6%, 20.8% and 44.4% in the cases and 20.9%, 22.7%, 18.9%, 23.2%, 18.2% and 43.2% in the controls, respectively. No significant difference was observed in genotypes or allele frequencies of the 6 tSNPs between case group and control group, and neither of haplotypes in block 1 nor in block 2 was significantly associated with the development of hepatitis. Based on the Chinese anti-TB treatment cohort, we did not find a statistically significant association between genetic polymorphisms of CYP2E1 and the risk of anti-TB drug-induced hepatitis. None of the haplotypes showed a significant association with the development of hepatitis in Chinese TB population.

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

A retrospective pilot study to determine whether the reproductive tract microbiota differs between women with a history of infertility and fertile women.

PubMed

Wee, Bryan A; Thomas, Mark; Sweeney, Emma Louise; Frentiu, Francesca D; Samios, Melanie; Ravel, Jacques; Gajer, Pawel; Myers, Garry; Timms, Peter; Allan, John A; Huston, Wilhelmina M

2018-06-01

We know very little about the microbiota inhabiting the upper female reproductive tract and how it impacts on fertility. This pilot study aimed to examine the vaginal, cervical and endometrial microbiota for women with a history of infertility compared to women with a history of fertility. Using a retrospective case-control study design, women were recruited for collection of vaginal, cervical and endometrial samples. The microbiota composition was analysed by 16S ribosomal RNA (rRNA) gene amplification and endometrial expression of selected human genes by quantitative reverse transcription polymerase chain reaction. Sixty-five specimens from the reproductive tract of 31 women were successfully analysed using 16S rRNA gene amplicon sequencing (16 controls and 15 cases). The dominant microbial community members were consistent in the vagina and cervix, and generally consistent with the endometrium although the relative proportions varied. We detected three major microbiota clusters that did not group by tissue location or case-control status. There was a trend that infertile women more often had Ureaplasma in the vagina and Gardnerella in the cervix. Testing for the expression of selected genes in the endometrium did not show evidence of correlation with case-control status, or with microbial community composition, although Tenascin-C expression correlated with a history of miscarriage. There is a need for further exploration of the endometrial microbiota, and how the microbiota members or profile interplays with fertility or assisted reproductive technologies. © 2017 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Multimedia case management system implemented in Java

NASA Astrophysics Data System (ADS)

Stewart, Howard D.; Davis, Midge L.; Handy, Dale L.; Kvarfordt, Kent B.; Ford, Glenn

1999-01-01

Managing the timely access of information is a major challenge facing law enforcement agencies. One of the areas of greatest need is that of the case management process. During the course of FY98, the Office of National Drug Control Policy (ONDCP), the Counterdrug Technology Assessment Center (CTAC), the Idaho National Engineering and Environmental Laboratory (INEEL), and the Criminal Investigative Bureau (CIB) of the state of Idaho, created a Northwest testbed to develop and integrate a multimedia case management system. A system was developed to assist investigators in tracking and maintaining investigative cases and improving access to internal and external data resources. In this paper, we discuss the results of our case management system development and the ability to present state and federal information incorporating object oriented and multimedia techniques. We then outline our plans for future research and development.

75 FR 11183 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... technology. Written comments should be received within 60 days of this notice. Proposed Project Case Studies... case studies of six CPPW-funded states and 15 CPPW-funded communities. The case study sites will be... region, and targeted population. Case study information will be collected by conducting personal...

Integration of Technology into the Classroom: Case Studies.

ERIC Educational Resources Information Center

Johnson, D. LaMont, Ed.; Maddux, Cleborne D., Ed.; Liu, Leping, Ed.

This book contains the following case studies on the integration of technology in education: (1) "First Steps toward a Statistically Generated Information Technology Integration Model" (D. LaMont Johnson and Leping Liu); (2) "Case Studies: Are We Rejecting Rigor or Rediscovering Richness?" (Cleborne D. Maddux); (3)…

A Model Framework to Estimate Impact and Cost of Genetics-Based Sterile Insect Methods for Dengue Vector Control

PubMed Central

Alphey, Nina; Alphey, Luke; Bonsall, Michael B.

2011-01-01

Vector-borne diseases impose enormous health and economic burdens and additional methods to control vector populations are clearly needed. The Sterile Insect Technique (SIT) has been successful against agricultural pests, but is not in large-scale use for suppressing or eliminating mosquito populations. Genetic RIDL technology (Release of Insects carrying a Dominant Lethal) is a proposed modification that involves releasing insects that are homozygous for a repressible dominant lethal genetic construct rather than being sterilized by irradiation, and could potentially overcome some technical difficulties with the conventional SIT technology. Using the arboviral disease dengue as an example, we combine vector population dynamics and epidemiological models to explore the effect of a program of RIDL releases on disease transmission. We use these to derive a preliminary estimate of the potential cost-effectiveness of vector control by applying estimates of the costs of SIT. We predict that this genetic control strategy could eliminate dengue rapidly from a human community, and at lower expense (approximately US$ 2∼30 per case averted) than the direct and indirect costs of disease (mean US$ 86–190 per case of dengue). The theoretical framework has wider potential use; by appropriately adapting or replacing each component of the framework (entomological, epidemiological, vector control bio-economics and health economics), it could be applied to other vector-borne diseases or vector control strategies and extended to include other health interventions. PMID:21998654

Military Standard. Marking Technical Data Prepared by or for the Department of Defense

DTIC Science & Technology

1990-02-01

Regulations f. ECCN - Export Commodity Control Number g. ED - Executive Order h. FOIA - Freedom of Information Act i. IEP - International Exchange...critical are explicitly covered in the CCL, ",, the Export Commodity Control Number ( ECCN ) reference is provided. In o~ner cases where the ECCN statement...controlling mechanism is in supplement three of the EAR. 3,7 MIL-STD-1806 APPENDIX B A listing such as " ECCN 1355A" means the technology is specifically

INNOVATIVE CLEAN TECHNOLOGIES CASE STUDIES - PROJECT REPORT

EPA Science Inventory

The innovative Clean Technologies Case Studies contained herein are the products of the "Pollution Prevention by and for Small Business" Program (P2SB) The P2SB was an outreach program directed to small businesses that had developed innovative concepts for pollution prevention i...

INNOVATIVE CLEAN TECHNOLOGIES CASE STUDIES - SECOND YEAR PROJECT REPORT

EPA Science Inventory

The Innovative Clean Technologies Case Studies contained herein are the products of the "Pollution Prevention by and for Small Business" Program (P2SB). The P2SB was an outreach program directed to small businesses that had developed innovative concepts for pollution pr...

Online Learning and Teaching with Technology: Case Studies, Experience and Practice. Case Studies of Teaching in Higher Education.

ERIC Educational Resources Information Center

Murphy, David, Ed.; Walker, Rob, Ed.; Webb, Graham, Ed.

This book contains case studies that look at using technology in a wide range of situations, from fully online courses to more traditional face-to-face settings. The case studies deal with issues related to student interaction, teaching and assessment, planning and development, and policy. The following case studies are included: (1) "Flame…

Technostress in Libraries and Media Centers: Case Studies and Coping Strategies.

ERIC Educational Resources Information Center

Hickey, Kate D., Ed.

1992-01-01

Discusses technostress--i.e., stress brought on by changes in technology--in libraries and media centers. Case studies are presented that show stress in community college libraries caused by the rapid implementation of new technologies; coping strategies for librarians and media specialists are discussed; and strategies for managers are suggested.…

A Multi-Case Study of University Students' Language-Learning Experience Mediated by Mobile Technologies: A Socio-Cultural Perspective

ERIC Educational Resources Information Center

Ma, Qing

2017-01-01

Emerging mobile technologies can be considered a new form of social and cultural artefact that mediates people's language learning. This multi-case study investigates how mobile technologies mediate a group of Hong Kong university students' L2 learning, which serves as a lens with which to capture the personalised, unique, contextual and…

Enhancing Technology Education by Forming Links with Industry: A New Zealand Case Study

ERIC Educational Resources Information Center

Brunton, Margaret; Coll, Richard K.

2005-01-01

The New Zealand technology curriculum suggests that schools should seek to develop links with industry as a means of providing real-world examples of technology practice. However, if a school is to form links, what form might such links take, and with whom should they be made? The case study research reported here represents an investigation into…

A Case Study Exploring the Perceptions of Educational Technology Leadership in a Rural School District

ERIC Educational Resources Information Center

Lichucki, Michael

2013-01-01

Although technology is common in our society, it has not universally become an expected practice in our schools. The problem that was addressed by the qualitative, case study design is that teachers and administrators do not share an understanding of educational technology leadership. School leaders that do not understand the needs of classroom…

Hospital costs of central line-associated bloodstream infections and cost-effectiveness of closed vs. open infusion containers. The case of Intensive Care Units in Italy

PubMed Central

2010-01-01

Objectives The aim was to evaluate direct health care costs of central line-associated bloodstream infections (CLABSI) and to calculate the cost-effectiveness ratio of closed fully collapsible plastic intravenous infusion containers vs. open (glass) infusion containers. Methods A two-year, prospective case-control study was undertaken in four intensive care units in an Italian teaching hospital. Patients with CLABSI (cases) and patients without CLABSI (controls) were matched for admission departments, gender, age, and average severity of illness score. Costs were estimated according to micro-costing approach. In the cost effectiveness analysis, the cost component was assessed as the difference between production costs while effectiveness was measured by CLABSI rate (number of CLABSI per 1000 central line days) associated with the two infusion containers. Results A total of 43 cases of CLABSI were compared with 97 matched controls. The mean age of cases and controls was 62.1 and 66.6 years, respectively (p = 0.143); 56% of the cases and 57% of the controls were females (p = 0.922). The mean length of stay of cases and controls was 17.41 and 8.55 days, respectively (p < 0.001). Overall, the mean total costs of patients with and without CLABSI were € 18,241 and € 9,087, respectively (p < 0.001). On average, the extra cost for drugs was € 843 (p < 0.001), for supplies € 133 (p = 0.116), for lab tests € 171 (p < 0.001), and for specialist visits € 15 (p = 0.019). The mean extra cost for hospital stay (overhead) was € 7,180 (p < 0.001). The closed infusion container was a dominant strategy. It resulted in lower CLABSI rates (3.5 vs. 8.2 CLABSIs per 1000 central line days for closed vs. open infusion container) without any significant difference in total production costs. The higher acquisition cost of the closed infusion container was offset by savings incurred in other phases of production, especially waste management. Conclusions CLABSI results in considerable and significant increase in utilization of hospital resources. Use of innovative technologies such as closed infusion containers can significantly reduce the incidence of healthcare acquired infection without posing additional burden on hospital budgets. PMID:20459753

Hospital costs of central line-associated bloodstream infections and cost-effectiveness of closed vs. open infusion containers. The case of Intensive Care Units in Italy.

PubMed

Tarricone, Rosanna; Torbica, Aleksandra; Franzetti, Fabio; Rosenthal, Victor D

2010-05-10

The aim was to evaluate direct health care costs of central line-associated bloodstream infections (CLABSI) and to calculate the cost-effectiveness ratio of closed fully collapsible plastic intravenous infusion containers vs. open (glass) infusion containers. A two-year, prospective case-control study was undertaken in four intensive care units in an Italian teaching hospital. Patients with CLABSI (cases) and patients without CLABSI (controls) were matched for admission departments, gender, age, and average severity of illness score. Costs were estimated according to micro-costing approach. In the cost effectiveness analysis, the cost component was assessed as the difference between production costs while effectiveness was measured by CLABSI rate (number of CLABSI per 1000 central line days) associated with the two infusion containers. A total of 43 cases of CLABSI were compared with 97 matched controls. The mean age of cases and controls was 62.1 and 66.6 years, respectively (p = 0.143); 56% of the cases and 57% of the controls were females (p = 0.922). The mean length of stay of cases and controls was 17.41 and 8.55 days, respectively (p < 0.001). Overall, the mean total costs of patients with and without CLABSI were euro 18,241 and euro 9,087, respectively (p < 0.001). On average, the extra cost for drugs was euro 843 (p < 0.001), for supplies euro 133 (p = 0.116), for lab tests euro 171 (p < 0.001), and for specialist visits euro 15 (p = 0.019). The mean extra cost for hospital stay (overhead) was euro 7,180 (p < 0.001). The closed infusion container was a dominant strategy. It resulted in lower CLABSI rates (3.5 vs. 8.2 CLABSIs per 1000 central line days for closed vs. open infusion container) without any significant difference in total production costs. The higher acquisition cost of the closed infusion container was offset by savings incurred in other phases of production, especially waste management. CLABSI results in considerable and significant increase in utilization of hospital resources. Use of innovative technologies such as closed infusion containers can significantly reduce the incidence of healthcare acquired infection without posing additional burden on hospital budgets.

Tsetse Control and Gambian Sleeping Sickness; Implications for Control Strategy.

PubMed

Tirados, Inaki; Esterhuizen, Johan; Kovacic, Vanja; Mangwiro, T N Clement; Vale, Glyn A; Hastings, Ian; Solano, Philippe; Lehane, Michael J; Torr, Steve J

2015-01-01

Gambian sleeping sickness (human African trypanosomiasis, HAT) outbreaks are brought under control by case detection and treatment although it is recognised that this typically only reaches about 75% of the population. Vector control is capable of completely interrupting HAT transmission but is not used because it is considered too expensive and difficult to organise in resource-poor settings. We conducted a full scale field trial of a refined vector control technology to determine its utility in control of Gambian HAT. The major vector of Gambian HAT is the tsetse fly Glossina fuscipes which lives in the humid zone immediately adjacent to water bodies. From a series of preliminary trials we determined the number of tiny targets required to reduce G. fuscipes populations by more than 90%. Using these data for model calibration we predicted we needed a target density of 20 per linear km of river in riverine savannah to achieve >90% tsetse control. We then carried out a full scale, 500 km2 field trial covering two HAT foci in Northern Uganda to determine the efficacy of tiny targets (overall target density 5.7/km2). In 12 months, tsetse populations declined by more than 90%. As a guide we used a published HAT transmission model and calculated that a 72% reduction in tsetse population is required to stop transmission in those settings. The Ugandan census suggests population density in the HAT foci is approximately 500 per km2. The estimated cost for a single round of active case detection (excluding treatment), covering 80% of the population, is US$433,333 (WHO figures). One year of vector control organised within the country, which can completely stop HAT transmission, would cost US$42,700. The case for adding this method of vector control to case detection and treatment is strong. We outline how such a component could be organised.

Tsetse Control and Gambian Sleeping Sickness; Implications for Control Strategy

PubMed Central

Kovacic, Vanja; Mangwiro, T. N. Clement; Vale, Glyn A.; Hastings, Ian; Solano, Philippe; Lehane, Michael J.; Torr, Steve J.

2015-01-01

Background Gambian sleeping sickness (human African trypanosomiasis, HAT) outbreaks are brought under control by case detection and treatment although it is recognised that this typically only reaches about 75% of the population. Vector control is capable of completely interrupting HAT transmission but is not used because it is considered too expensive and difficult to organise in resource-poor settings. We conducted a full scale field trial of a refined vector control technology to determine its utility in control of Gambian HAT. Methods and Findings The major vector of Gambian HAT is the tsetse fly Glossina fuscipes which lives in the humid zone immediately adjacent to water bodies. From a series of preliminary trials we determined the number of tiny targets required to reduce G. fuscipes populations by more than 90%. Using these data for model calibration we predicted we needed a target density of 20 per linear km of river in riverine savannah to achieve >90% tsetse control. We then carried out a full scale, 500 km2 field trial covering two HAT foci in Northern Uganda to determine the efficacy of tiny targets (overall target density 5.7/km2). In 12 months, tsetse populations declined by more than 90%. As a guide we used a published HAT transmission model and calculated that a 72% reduction in tsetse population is required to stop transmission in those settings. Interpretation The Ugandan census suggests population density in the HAT foci is approximately 500 per km2. The estimated cost for a single round of active case detection (excluding treatment), covering 80% of the population, is US$433,333 (WHO figures). One year of vector control organised within the country, which can completely stop HAT transmission, would cost US$42,700. The case for adding this method of vector control to case detection and treatment is strong. We outline how such a component could be organised. PMID:26267814

Case study: using infrared technology for evidentiary purposes

NASA Astrophysics Data System (ADS)

Jolivet, Noel D.; Hansen, Joel; Miller, John Lester; Beniga, Rico; Austria, Rich

2014-06-01

Infrared technology and imaging systems are already used extensively by the law enforcement (LE) community, typically to gain a tactical advantage or obtain immediate situational awareness. As the use of infrared technology becomes more affordable and widespread, LE is finding new ways to use it and leverage the results in the courtroom as evidence. A case study will be presented where infrared imagery was used to support the Portland Police Bureau (PPB) in prosecuting an individual for a crime where a conviction might not have been assured without said imagery. Tests conducted at FLIR Systems, combined with expert witness testimony by a FLIR employee, helped a jury understand the significance of a key piece of infrared evidence, resulting in a conviction of the criminal. This case was the first Federal case of its kind where infrared imagery was used forensically as evidence and, as such, established precedence. Prior to this, infrared imagery has been offered and debated in court only as to whether it constitutes a legal search. Courtroom observations and lessons learned from this trial have shown that both industry and LE can do a better job of making the prosecution's cases stronger utilizing infrared technology and thus taking criminals off the street.

The Case Against Satellites. The Network Project. Notebook Number Seven.

ERIC Educational Resources Information Center

Columbia Univ., New York, NY. Network Project.

An analysis is presented of the dangers generated by the corporate ownership of a satellite communications technology powerful enough to centralize and control the flow of information. The first part of the report reprints the transcript of a radio documentary on satellite communications, one of a series of five MATRIX radio programs produced by…

40 CFR 432.22 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2013 CFR

2013-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.22 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2014 CFR

2014-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.22 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.22 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2012 CFR

2012-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.22 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

Effectiveness of oral polio vaccination against paralytic poliomyelitis: a matched case-control study in Somalia.

PubMed

Mahamud, Abdirahman; Kamadjeu, Raoul; Webeck, Jenna; Mbaeyi, Chukwuma; Baranyikwa, Marie Therese; Birungi, Julianne; Nurbile, Yassin; Ehrhardt, Derek; Shukla, Hemant; Chatterjee, Anirban; Mulugeta, Abraham

2014-11-01

After the last case of type 1 wild poliovirus (WPV1) was reported in 2007, Somalia experienced another outbreak of WPV1 (189 cases) in 2013. We conducted a retrospective, matched case-control study to evaluate the vaccine effectiveness (VE) of oral polio vaccine (OPV). We retrieved information from the Somalia Surveillance Database. A case was defined as any case of acute flaccid paralysis (AFP) with virological confirmation of WPV1. We selected two groups of controls for each case: non-polio AFP cases ("NPAFP controls") matched to WPV1 cases by age, date of onset of paralysis and region; and asymptomatic "neighborhood controls," matched by age. Using conditional logistic regression, we estimated the VE of OPV as (1-odds ratio)×100. We matched 99 WPV cases with 99 NPAFP controls and 134 WPV1 cases with 268 neighborhood controls. Using NPAFP controls, the overall VE was 70% (95% confidence interval [CI], 37-86), 59% (2-83) among 1-3 dose recipients, 77% (95% CI, 46-91) among ≥4 dose recipients. In neighborhood controls, the overall VE was 95% (95% CI, 84-98), 92% (72-98) among 1-3 dose recipients, and 97% (89-99) among ≥4 dose recipients. When the analysis was limited to cases and controls ≤24 months old, the overall VE in NPAFP and neighborhood controls was 95% (95% CI, 65-99) and 97% (95% CI, 76-100), respectively. Among individuals who were fully vaccinated with OPV, vaccination was effective at preventing WPV1 in Somalia. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Advanced Data Acquisition System Implementation for the ITER Neutron Diagnostic Use Case Using EPICS and FlexRIO Technology on a PXIe Platform

NASA Astrophysics Data System (ADS)

Sanz, D.; Ruiz, M.; Castro, R.; Vega, J.; Afif, M.; Monroe, M.; Simrock, S.; Debelle, T.; Marawar, R.; Glass, B.

2016-04-01

To aid in assessing the functional performance of ITER, Fission Chambers (FC) based on the neutron diagnostic use case deliver timestamped measurements of neutron source strength and fusion power. To demonstrate the Plant System Instrumentation & Control (I&C) required for such a system, ITER Organization (IO) has developed a neutron diagnostics use case that fully complies with guidelines presented in the Plant Control Design Handbook (PCDH). The implementation presented in this paper has been developed on the PXI Express (PXIe) platform using products from the ITER catalog of standard I&C hardware for fast controllers. Using FlexRIO technology, detector signals are acquired at 125 MS/s, while filtering, decimation, and three methods of neutron counting are performed in real-time via the onboard Field Programmable Gate Array (FPGA). Measurement results are reported every 1 ms through Experimental Physics and Industrial Control System (EPICS) Channel Access (CA), with real-time timestamps derived from the ITER Timing Communication Network (TCN) based on IEEE 1588-2008. Furthermore, in accordance with ITER specifications for CODAC Core System (CCS) application development, the software responsible for the management, configuration, and monitoring of system devices has been developed in compliance with a new EPICS module called Nominal Device Support (NDS) and RIO/FlexRIO design methodology.

Telehealth technology in case/disease management.

PubMed

Park, Eun-Jun

2006-01-01

Case managers can better coordinate and facilitate chronic illness care by adopting telehealth technology. This article overviews four major categories of telehealth technology based on patients' roles in self-management: surveillance, testing peripherals and messaging, decision support aids, and online support groups related to patients' subordinate, structured, collaborative, and autonomous roles, respectively. These various telehealth technologies should be selected on the basis of patients' care needs and preferences. Moreover, when they are integrated with other clinical information systems, case management practice can be better performed. However, the specific role functions and skill sets needed to be competent in telehealth environments have not yet been clearly identified. Considering role ambiguity and stress among telehealth clinicians, clarifying relevant roles is an urgent task.

Controlling the potential hazards of government-sponsored technology. [such as weather modification and the supersonic transports

NASA Technical Reports Server (NTRS)

Wollan, M. J.

1975-01-01

The ability was examined of governmental agencies to adequately assess technological programs or projects to which they are committed. The hazards of government-sponsored activities are discussed; these include weather modification, supersonic transport noise, and the value conflicts involved in the fluoridation controversy. These three case studies indicate that the Federal vested interests in the continuation of its technological programs limit its ability to provide adequate technology assessment.

Research participation experiences of informants of suicide and control cases: taken from a case-control psychological autopsy study of people who died by suicide.

PubMed

Wong, Paul W C; Chan, Wincy S C; Beh, Philip S L; Yau, Fiona W S; Yip, Paul S F; Hawton, Keith

2010-01-01

Ethical issues have been raised about using the psychological autopsy approach in the study of suicide. The impact on informants of control cases who participated in case-control psychological autopsy studies has not been investigated. (1) To investigate whether informants of suicide cases recruited by two approaches (coroners' court and public mortuaries) respond differently to the initial contact by the research team. (2) To explore the reactions, reasons for participation, and comments of both the informants of suicide and control cases to psychological autopsy interviews. (3) To investigate the impact of the interviews on informants of suicide cases about a month after the interviews. A self-report questionnaire was used for the informants of both suicide and control cases. Telephone follow-up interviews were conducted with the informants of suicide cases. The majority of the informants of suicide cases, regardless of the initial route of contact, as well as the control cases were positive about being approached to take part in the study. A minority of informants of suicide and control cases found the experience of talking about their family member to be more upsetting than expected. The telephone follow-up interviews showed that none of the informants of suicide cases reported being distressed by the psychological autopsy interviews. The acceptance rate for our original psychological autopsy study was modest. The findings of this study are useful for future participants and researchers in measuring the potential benefits and risks of participating in similar sensitive research. Psychological autopsy interviews may be utilized as an active engagement approach to reach out to the people bereaved by suicide, especially in places where the postvention work is underdeveloped.

Taming the Technology.

ERIC Educational Resources Information Center

Clinton, Janeen S.

This document reports on efforts to find technology-based solutions for the diverse challenges faced by students with disabling conditions. Twenty-three case studies describe actual scenarios experienced in the school district of Palm Beach County, Florida. For each case study, a situation is described, a challenge is identified, solutions are…

Using Large-Scale Cooperative Control to Manage Operational Uncertainties for Aquifer Thermal Energy Storage

NASA Astrophysics Data System (ADS)

Jaxa-Rozen, M.; Rostampour, V.; Kwakkel, J. H.; Bloemendal, M.

2017-12-01

Seasonal Aquifer Thermal Energy Storage (ATES) technology can help reduce the demand of energy for heating and cooling in buildings, and has become a popular option for larger buildings in northern Europe. However, the larger-scale deployment of this technology has evidenced some issues of concern for policymakers; in particular, recent research shows that operational uncertainties contribute to inefficient outcomes under current planning methods for ATES. For instance, systems in the Netherlands typically use less than half of their permitted pumping volume on an annual basis. This overcapacity gives users more flexibility to operate their systems in response to the uncertainties which drive building energy demand; these include short-term operational factors such as weather and occupancy, and longer-term, deeply uncertain factors such as changes in climate and aquifer conditions over the lifespan of the buildings. However, as allocated subsurface volume remains unused, this situation limits the adoption of the technology in dense areas. Previous work using coupled agent-based/geohydrological simulation has shown that the cooperative operation of neighbouring ATES systems can support more efficient spatial planning, by dynamically managing thermal interactions in response to uncertain operating conditions. An idealized case study with centralized ATES control thus showed significant improvements in the energy savings which could obtained per unit of allocated subsurface volume, without degrading the recovery performance of systems. This work will extend this cooperative approach for a realistic case study of ATES planning in the city of Utrecht, in the Netherlands. This case was previously simulated under different scenarios for individual ATES operation. The poster will compare these results with a cooperative case under which neighbouring systems can coordinate their operation to manage interactions. Furthermore, a cooperative game-theoretical framework will be used to analyze the theoretical conditions under which cooperation between ATES operators could be assumed to be stable and beneficial, under a range of scenarios for climate trends and ATES adoption pathways.

BURDEN OF TUBERCULOSIS AMONG STUDENTS IN TWO ETHIOPIAN UNIVERSITIES

PubMed Central

Mekonnen, Abiyu; Petros, Beyene

2017-01-01

Introduction Tuberculosis outbreaks emerge occasionally in long-term care facilities and various educational establishments. This study was designed to determine the five year overall prevalence and trend of tuberculosis and associated factors among students at Adama Science and Technology University and Addis Ababa University Sidist Kilo campus. Methods A five-year retrospective study was conducted on students medical records of tuberculosis Directly Observed Treatment Short Course clinics from September 2009 – July 2014. The overall prevalence and the trend of smear positive, smear negative and extra pulmonary tuberculosis cases was determined. Odds ratio with 95 percent confidence interval was calculated for categorical variables using a multivariate logistic regression model to assess the strength of association. Results A total of 112 and 263 tuberculos cases were recorded in Addis Ababa University Sidist Kilo campus and Adama Science and Technology University, respectively. The mean proportion of tuberculosis cases of all types among the total number of students enrolled at Adama Science and Technology University and Addis Ababa University Sidist Kilo campus was 1098.1 and 511.7 cases per 100,000 population, respectively. There was a statistically significant difference in prevalence of tuberculosis among students in Adama Science and Technology University compared to that in Addis Ababa University Sidist Kilo campus [adjusted odds ration: 2.881, 95% CI (1.76–4.71)]. The trend of tuberculosis prevalence showed a steady decline from the first to the last year of the study period. Conclusion The number of tuberculosis cases observed among university students in this study was high. Governmental and nongovernmental agencies involved in tuberculosis control must consider higher education institutions as focal points for prevention and elimination of tuberculosis in Ethiopia. PMID:29115116

BURDEN OF TUBERCULOSIS AMONG STUDENTS IN TWO ETHIOPIAN UNIVERSITIES.

PubMed

Mekonnen, Abiyu; Petros, Beyene

2016-10-01

Tuberculosis outbreaks emerge occasionally in long-term care facilities and various educational establishments. This study was designed to determine the five year overall prevalence and trend of tuberculosis and associated factors among students at Adama Science and Technology University and Addis Ababa University Sidist Kilo campus. A five-year retrospective study was conducted on students’ medical records of tuberculosis Directly Observed Treatment Short Course clinics from September 2009– July 2014. The overall prevalence and the trend of smear positive, smear negative and extra pulmonary tuberculosis cases was determined. Odds ratio with 95 percent confidence interval was calculated for categorical variables using a multivariate logistic regression model to assess the strength of association. A total of 112 and 263 tuberculos cases were recorded in Addis Ababa University Sidist Kilo campus and Adama Science and Technology University, respectively. The mean proportion of tuberculosis cases of all types among the total number of students enrolled at Adama Science and Technology University and Addis Ababa University Sidist Kilo campus was 1098.1 and 511.7 cases per 100,000 population, respectively. There was a statistically significant difference in prevalence of tuberculosis among students in Adama Science and Technology University compared to that in Addis Ababa University Sidist Kilo campus [adjusted odds ration: 2.881, 95% CI (1.76-4.71)]. The trend of tuberculosis prevalence showed a steady decline from the first to the last year of the study period. The number of tuberculosis cases observed among university students in this study was high. Governmental and nongovernmental agencies involved in tuberculosis control must consider higher education institutions as focal points for prevention and elimination of tuberculosis in Ethiopia.

Impact of Export Control and Technology Transfer Regimes: International Perspectives

DTIC Science & Technology

2012-01-07

major national security and public policy issue. Exploring the ITAR environment through a set of case studies was the central idea in a project...cover) was based on a survey of UK stakeholders. The results were unambiguous and striking. Our British partners conclude ITAR is a good idea gone...ITAR) regime is a major national security and public policy issue. Exploring the ITAR environment through a set of case studies was the central idea

An access technology delivery protocol for children with severe and multiple disabilities: a case demonstration.

PubMed

Mumford, Leslie; Lam, Rachel; Wright, Virginia; Chau, Tom

2014-08-01

This study applied response efficiency theory to create the Access Technology Delivery Protocol (ATDP), a child and family-centred collaborative approach to the implementation of access technologies. We conducted a descriptive, mixed methods case study to demonstrate the ATDP method with a 12-year-old boy with no reliable means of access to an external device. Evaluations of response efficiency, satisfaction, goal attainment, technology use and participation were made after 8 and 16 weeks of training with a custom smile-based access technology. At the 16 week mark, the new access technology offered better response quality; teacher satisfaction was high; average technology usage was 3-4 times per week for up to 1 h each time; switch sensitivity and specificity reached 78% and 64%, respectively, and participation scores increased by 38%. This case supports further development and testing of the ATDP with additional children with multiple or severe disabilities.

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas – A Techno-Economic Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Yunhua; Jones, Susanne B.; Biddy, Mary J.

2012-08-01

This study reports the comparison of biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT) case, goal case, and conventional case, were compared in terms of performance and cost. The SOT case and goal case represent technology being developed at Pacific Northwest National Laboratory for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation (S2D process). The conventional case mirrors the two-step S2D process previously utilized and reported by Mobil using natural gas feedstock and consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. Analysis of the three cases revealedmore » that the goal case could indeed reduce fuel production cost over the conventional case, but that the SOT was still more expensive than the conventional. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield, single pass conversion efficiency, and reactor space velocity are the key factors driving the high cost for the SOT case.« less

Frequency-dependent dielectric contribution of flexoelectricity allowing control of state switching in helicoidal liquid crystals

NASA Astrophysics Data System (ADS)

Outram, B. I.; Elston, S. J.

2013-07-01

The contribution of flexoelectric polarization to the dielectric susceptibility in helicoidal liquid crystals is formulated for the static equilibrium case, and further in the case of a time-varying field. A dispersion of the dielectric permittivity due to the frequency response of flexoelectric switching is described. The special case of a negative dielectric-anisotropy nematic material is considered and experimentally shown to agree with the analytical theory. It is further demonstrated how relaxation of the flexoelectric contribution to the dielectric tensor in this special case can be exploited to switch between states in cholesteric liquid crystal structures by altering the applied time-dependent field amplitude, if Δɛ<0 and (e1-e3)2/(K1+K3)>-Δɛɛ0. Consequentially, a versatile mechanism for driving between states in liquid crystal systems has been demonstrated and its implications for technology are suggested, and include dual-mode, bistable, and transflective displays.

The lack of selection bias in a snowball sampled case-control study on drug abuse.

PubMed

Lopes, C S; Rodrigues, L C; Sichieri, R

1996-12-01

Friend controls in matched case-control studies can be a potential source of bias based on the assumption that friends are more likely to share exposure factors. This study evaluates the role of selection bias in a case-control study that used the snowball sampling method based on friendship for the selection of cases and controls. The cases selected fro the study were drug abusers located in the community. Exposure was defined by the presence of at least one psychiatric diagnosis. Psychiatric and drug abuse/dependence diagnoses were made according to the Diagnostic and Statistical Manual of Mental Disorders (DSM-III-R) criteria. Cases and controls were matched on sex, age and friendship. The measurement of selection bias was made through the comparison of the proportion of exposed controls selected by exposed cases (p1) with the proportion of exposed controls selected by unexposed cases (p2). If p1 = p2 then, selection bias should not occur. The observed distribution of the 185 matched pairs having at least one psychiatric disorder showed a p1 value of 0.52 and a p2 value of 0.51, indicating no selection bias in this study. Our findings support the idea that the use of friend controls can produce a valid basis for a case-control study.

[Application of nested case-control study on safe evaluation of post-marketing traditional Chinese medicine injection].

PubMed

Xiao, Ying; Zhao, Yubin; Xie, Yanming

2011-10-01

The nested case-control study design (or the case-control in a cohort study) is described here as a new study design used in safe evaluation of post-marketing traditional Chinese medicine injection. In the nested case-control study, cases of a disease that occur in a defined cohort are identified and, for each, a specified number of matched controls is selected from among those in the cohort who have not developed the disease by the time of disease occurrence in the case. For many research questions, the nested case-control design potentially offers impressive reductions in costs and efforts of data collection and analysis compared with the full cohort approach, with relatively minor loss in statistical efficiency. The nested case-control design is particularly advantageous for studies in safe evaluation of post-marketing traditional Chinese medicine injection. Some examples of the application of nested case-control study were given.

Automated and Autonomous Systems for Combat Service Support: Scoping Study and Technology Prioritisation

DTIC Science & Technology

2016-10-01

workshop, and use case development for automated and autonomous systems for CSS. The scoping study covers key concepts and trends, a technology scan, and...requirements and delimiters for the selected technologies. The report goes on to present detailed use cases for two technologies of interest: semi...selected use cases . As a result of the workshop, the large list of technologies and applications from the scoping study was narrowed down to the top

Organic Process Technology Valuation: Cyclohexanone Oxime Syntheses

ERIC Educational Resources Information Center

Cannon, Kevin C.; Breen, Maureen P.

2010-01-01

Three contemporary processes for cyclohexanone oxime synthesis are evaluated in a case study. The case study introduces organic chemistry students to basic cost accounting to determine the most economical technology. Technical and financial aspects of these processes are evaluated with problem-based exercises that may be completed by students…

Using social media as a tool to predict syphilis.

PubMed

Young, Sean D; Mercer, Neil; Weiss, Robert E; Torrone, Elizabeth A; Aral, Sevgi O

2018-04-01

Syphilis rates have been rapidly rising in the United States. New technologies, such as social media, might be used to anticipate and prevent the spread of disease. Because social media data collection is easy and inexpensive, integration of social media data into syphilis surveillance may be a cost-effective surveillance strategy, especially in low-resource regions. People are increasingly using social media to discuss health-related issues, such as sexual risk behaviors, allowing social media to be a potential tool for public health and medical research. This study mined Twitter data to assess whether social media could be used to predict syphilis cases in 2013 based on 2012 data. We collected 2012 and 2013 county-level primary and secondary (P&S) and early latent syphilis cases reported to the Center for Disease Control and Prevention, along with >8500 geolocated tweets in the United States that were filtered to include sexual risk-related keywords, including colloquial terms for intercourse. We assessed the relationship between syphilis-related tweets and actual case reports by county, controlling for socioeconomic indicators and prior year syphilis cases. We found a significant positive relationship between tweets and cases of P&S and early latent syphilis. This study shows that social media may be an additional tool to enhance syphilis prediction and surveillance. Copyright © 2017 Elsevier Inc. All rights reserved.

Fault Injection Validation of a Safety-Critical TMR Sysem

NASA Astrophysics Data System (ADS)

Irrera, Ivano; Madeira, Henrique; Zentai, Andras; Hergovics, Beata

2016-08-01

Digital systems and their software are the core technology for controlling and monitoring industrial systems in practically all activity domains. Functional safety standards such as the European standard EN 50128 for railway applications define the procedures and technical requirements for the development of software for railway control and protection systems. The validation of such systems is a highly demanding task. In this paper we discuss the use of fault injection techniques, which have been used extensively in several domains, particularly in the space domain, to complement the traditional procedures to validate a SIL (Safety Integrity Level) 4 system for railway signalling, implementing a TMR (Triple Modular Redundancy) architecture. The fault injection tool is based on JTAG technology. The results of our injection campaign showed a high degree of tolerance to most of the injected faults, but several cases of unexpected behaviour have also been observed, helping understanding worst-case scenarios.

Navigation-guided optic canal decompression for traumatic optic neuropathy: Two case reports.

PubMed

Bhattacharjee, Kasturi; Serasiya, Samir; Kapoor, Deepika; Bhattacharjee, Harsha

2018-06-01

Two cases of traumatic optic neuropathy presented with profound loss of vision. Both cases received a course of intravenous corticosteroids elsewhere but did not improve. They underwent Navigation guided optic canal decompression via external transcaruncular approach, following which both cases showed visual improvement. Postoperative Visual Evoked Potential and optical coherence technology of Retinal nerve fibre layer showed improvement. These case reports emphasize on the role of stereotactic navigation technology for optic canal decompression in cases of traumatic optic neuropathy.

Parent Perception of Two Eye-Gaze Control Technology Systems in Young Children with Cerebral Palsy: Pilot Study.

PubMed

Karlsson, Petra; Wallen, Margaret

2017-01-01

Eye-gaze control technology enables people with significant physical disability to access computers for communication, play, learning and environmental control. This pilot study used a multiple case study design with repeated baseline assessment and parents' evaluations to compare two eye-gaze control technology systems to identify any differences in factors such as ease of use and impact of the systems for their young children. Five children, aged 3 to 5 years, with dyskinetic cerebral palsy, and their families participated. Overall, families were satisfied with both the Tobii PCEye Go and myGaze® eye tracker, found them easy to position and use, and children learned to operate them quickly. This technology provides young children with important opportunities for learning, play, leisure, and developing communication.

Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

PubMed

Vogt, Marjorie A; Schaffner, Barbara H

2016-07-01

Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

Repairing casing at a gas storage field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollenbaugh, B.

1992-09-01

This paper reports on the Leyden gas storage field which is a 1.5-Bcf working volume underground gas storage facility locating at the northwest edge of the Denver, Colo., metropolitan area. The field is owned by Public Service Co. of Colorado and operated by its wholly owned subsidiary, Western Gas Supply Co. Logging technology was instrumental in locating casing damage at two wells, identifying the extent of the damage and ensuring a successful repair. The well casings were repaired by installing a liner between two packers, with one packer set above the damage and the other set below it. Special equipmentmore » and procedures were required for workover and drilling operations because of the complications associated with cavern storage. Logging technology can locate damaged casing and evaluate the type and extent of the damage, and also predict the probability of gas migration behind the casing.« less

Clinical Application of Mesenchymal Stem Cells and Novel Supportive Therapies for Oral Bone Regeneration

PubMed Central

O'Valle, Francisco; Lanis, Alejandro; Dohan Ehrenfest, David M.; Wang, Hom-Lay; Galindo-Moreno, Pablo

2015-01-01

Bone regeneration is often needed prior to dental implant treatment due to the lack of adequate quantity and quality of the bone after infectious diseases, trauma, tumor, or congenital conditions. In these situations, cell transplantation technologies may help to overcome the limitations of autografts, xenografts, allografts, and alloplastic materials. A database search was conducted to include human clinical trials (randomized or controlled) and case reports/series describing the clinical use of mesenchymal stem cells (MSCs) in the oral cavity for bone regeneration only specifically excluding periodontal regeneration. Additionally, novel advances in related technologies are also described. 190 records were identified. 51 articles were selected for full-text assessment, and only 28 met the inclusion criteria: 9 case series, 10 case reports, and 9 randomized controlled clinical trials. Collectively, they evaluate the use of MSCs in a total of 290 patients in 342 interventions. The current published literature is very diverse in methodology and measurement of outcomes. Moreover, the clinical significance is limited. Therefore, the use of these techniques should be further studied in more challenging clinical scenarios with well-designed and standardized RCTs, potentially in combination with new scaffolding techniques and bioactive molecules to improve the final outcomes. PMID:26064899

Applications of a Case Library of Technology Integration Stories for Teachers

ERIC Educational Resources Information Center

Wang, Feng-Kwei; Jonassen, David H.; Strobel, Johannes; Cernusca, Dawn

2003-01-01

Stories are the most natural form of communication and learning among humans. In this paper, we describe how we have designed and implemented an case library of technology integration stories to support pre-service and in-service teachers learning how to integrate technologies into their teaching. The case library was built using the artificial…

Titanium template for scaphoid reconstruction.

PubMed

Haefeli, M; Schaefer, D J; Schumacher, R; Müller-Gerbl, M; Honigmann, P

2015-06-01

Reconstruction of a non-united scaphoid with a humpback deformity involves resection of the non-union followed by bone grafting and fixation of the fragments. Intraoperative control of the reconstruction is difficult owing to the complex three-dimensional shape of the scaphoid and the other carpal bones overlying the scaphoid on lateral radiographs. We developed a titanium template that fits exactly to the surfaces of the proximal and distal scaphoid poles to define their position relative to each other after resection of the non-union. The templates were designed on three-dimensional computed tomography reconstructions and manufactured using selective laser melting technology. Ten conserved human wrists were used to simulate the reconstruction. The achieved precision measured as the deviation of the surface of the reconstructed scaphoid from its virtual counterpart was good in five cases (maximal difference 1.5 mm), moderate in one case (maximal difference 3 mm) and inadequate in four cases (difference more than 3 mm). The main problems were attributed to the template design and can be avoided by improved pre-operative planning, as shown in a clinical case. © The Author(s) 2014.

The virtual case: a new method to completely digitize cytological and histological slides.

PubMed

Demichelis, F; Barbareschi, M; Dalla Palma, P; Forti, S

2002-08-01

The purpose of this study was to present a new method for handling histological/cytological cases. Thanks to the introduction of information technology in pathology, including the amenities afforded by robotic microscopes and digital imaging, tissue slides can be represented and evaluated using digital techniques in order to construct virtual cases through completely automated procedures. A virtual case (VC) is composed of a collection of digital images representing a histological/cytological slide at all magnification levels together with all relevant clinical data. In the present study, we describe an automated system to manage robotic microscope and image acquisition for the proper construction of VCs. These can then be viewed on a computer by means of an interface ("user-friendly") that allows one to select the more appropriate fields and to examine them at different magnifications, rapidly going from panoramic views to high resolution and vice versa. In comparison with glass slides, VCs have several advantages arising from their digital nature and can be considered a common platform for a wide range of applications such as teleconsultation, education, research, and quality control and proficiency tests.

Employing the FITT framework to explore HIV case managers' perceptions of two electronic clinical data (ECD) summary systems.

PubMed

Schnall, Rebecca; Smith, Ann B; Sikka, Manik; Gordon, Peter; Camhi, Eli; Kanter, Timothy; Bakken, Suzanne

2012-10-01

Case managers facilitate continuity of care for persons living with HIV (PLWH) by coordination of resources and referrals to social services and medical care. The complexity of HIV care and associated comorbidities drives the need for medical and psychosocial care coordination, which may be achieved through health information exchange (HIE) systems. However, the use of HIE has not been well studied in the context of HIV services. The purpose of this descriptive qualitative study is to explore factors influencing case managers' adoption of electronic clinical data (ECD) summaries as an HIE strategy in HIV care through application of the "fit between individuals, task and technology" (FITT) framework. Focus group methodology was used to gather perceptions from 48 participants who provided direct case management services for PLWH in New York City. Questions addressed current quality and efficiency challenges to HIE utilization in the context of case management of PLWH as well as barriers and enablers to use of an ECD summary. Analysis of the data was guided by the FITT framework. Major themes by interaction type were: (1) task-technology fit - resources, time and workflow; (2) individual-task fit - training and technical support; and 3) individual-technology fit - ECD summary functionality, technical difficulties and the need of a computer for each end-user. Our findings provide evidence for the applicability of the FITT framework to explore case managers' perceptions of factors influencing the adoption of ECD summary systems for HIV care prior to actual implementation. Assessment of fit among individual, task, and technology and addressing the concerns identified prior to implementation is critical to successful adoption of health information technology as a strategy to improve quality and efficiency in health care. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The effectiveness of collaborative care for people with memory problems in primary care: results of the CAREDEM case management modelling and feasibility study.

PubMed

Iliffe, Steve; Waugh, Amy; Poole, Marie; Bamford, Claire; Brittain, Katie; Chew-Graham, Carolyn; Fox, Chris; Katona, Cornelius; Livingston, Gill; Manthorpe, Jill; Steen, Nick; Stephens, Barbara; Hogan, Vanessa; Robinson, Louise

2014-08-01

People with dementia and their families need support in different forms, but currently services are often fragmented with variable quality of care. Case management offers a way of co-ordinating services along the care pathway and therefore could provide individualised support; however, evidence of the effectiveness of case management for dementia is inconclusive. To adapt the intervention used in a promising case management project in the USA and test its feasibility and acceptability in English general practice. In work package 1, a design group of varied professionals, with a carer and staff from the voluntary sector, met six times over a year to identify the skills and personal characteristics required for case management; protocols from the US study were adapted for use in the UK. The feasibility of recruiting general practices and patient-carer dyads and of delivering case management were tested in a pilot study (work package 2). An embedded qualitative study explored stakeholder views on study procedures and case management. Four general practices, two in the north-east of England (Newcastle) one in London and one in Norfolk, took part in a feasibility pilot study of case management. Community-dwelling people with dementia and their carers who were not already being case managed by other services. A social worker shared by the two practices in the north-east and practice nurses in the other two practices were trained to deliver case management. We aimed to recruit 11 people with dementia from each practice who were not already being case managed. Numbers of people with dementia and their carers recruited, numbers and content of contacts, needs identified and perceptions of case management among stakeholders. Recruitment of practices and patients was slow and none of the practices achieved its recruitment target. It took more than 6 months to recruit a total of 28 people with dementia. Practice Quality and Outcome Framework registers for dementia contained only 60% of the expected number of people, most living in care homes. All stakeholders were positive about the potential of case management; however, only one of the four practices achieved a level of case management activity that might have influenced patient and carer outcomes. Case managers' activity levels were not related solely to time available for case management. Delivery of case management was hindered by limited clarity about the role, poor integration with existing services and a lack of embeddedness within primary care. There were discrepancies between case manager and researcher judgements about need, and evidence of a high threshold for acting on unmet need. The practice nurses experienced difficulties in ring-fencing case management time. The model of case management developed and evaluated in this feasibility study is unlikely to be sustainable in general practice under current conditions and in our view it would not be appropriate to attempt a definitive trial of this model. This study could inform the development of a case management role with a greater likelihood of impact. Different approaches to recruiting and training case managers, and identifying people with dementia who might benefit from case management, are needed, as is exploration of the scale of need for this type of working. Current Controlled Trials ISRCTN74015152. This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 18, No. 52. See the NIHR Journals Library website for further project information.

SRM 2460/2461 Standard Bullets and Casings Project

PubMed Central

Song, J.; Whitenton, E.; Kelley, D.; Clary, R.; Ma, L.; Ballou, S.; Ols, M.

2004-01-01

The National Institute of Standards and Technology Standard Reference Material (SRM) 2460/2461 standard bullets and casings project will provide support to firearms examiners and to the National Integrated Ballistics Information Network (NIBIN) in the United States. The SRM bullet is designed as both a virtual and a physical bullet profile signature standard. The virtual standard is a set of six digitized bullet profile signatures originally traced from six master bullets fired at the Bureau of Alcohol, Tobacco and Firearms (ATF) and the Federal Bureau of Investigation (FBI). By using the virtual signature standard to control the tool path on a numerically controlled diamond turning machine, 40 SRM bullets were produced. A profile signature measurement system was established for the SRM bullets. The profile signature differences are quantified by the maximum of the cross correlation function and by the signature difference between pairs of compared profile signatures measured on different SRM bullets. Initial measurement results showed high reproducibility for both the measurement system and production process of the SRM bullets. A traceability scheme has been proposed to establish the measurement traceability for nationwide bullet signature measurements to NIST, ATF and FBI. Prototype SRM casings have also been developed. PMID:27366632

Control of coupled oscillator networks with application to microgrid technologies.

PubMed

Skardal, Per Sebastian; Arenas, Alex

2015-08-01

The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

Control of coupled oscillator networks with application to microgrid technologies

PubMed Central

Skardal, Per Sebastian; Arenas, Alex

2015-01-01

The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions—a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself. PMID:26601231

Control of coupled oscillator networks with application to microgrid technologies

NASA Astrophysics Data System (ADS)

Arenas, Alex

The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable syn- chronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

Converting MEMS technology into profits

NASA Astrophysics Data System (ADS)

Bryzek, Janusz

1998-08-01

This paper discusses issues related to transitioning a company from the advanced technology development phase (with a particular focus on MEMS) to a profitable business, with emphasis on start-up companies. It includes several case studies from (primarily) NovaSensor MEMS development history. These case studies illustrate strategic problems with which advanced MEMS technology developers have to be concerned. Conclusions from these case studies could be used as checkpoints for future MEMS developers to increase probability of profitable operations. The objective for this paper is to share the author's experience from multiple MEMS start-ups to accelerate development of the MEMS market by focusing state- of-the-art technologists on marketing issues.

Screening of pollution control and clean-up materials for river chemical spills using the multiple case-based reasoning method with a difference-driven revision strategy.

PubMed

Liu, Rentao; Jiang, Jiping; Guo, Liang; Shi, Bin; Liu, Jie; Du, Zhaolin; Wang, Peng

2016-06-01

In-depth filtering of emergency disposal technology (EDT) and materials has been required in the process of environmental pollution emergency disposal. However, an urgent problem that must be solved is how to quickly and accurately select the most appropriate materials for treating a pollution event from the existing spill control and clean-up materials (SCCM). To meet this need, the following objectives were addressed in this study. First, the material base and a case base for environment pollution emergency disposal were established to build a foundation and provide material for SCCM screening. Second, the multiple case-based reasoning model method with a difference-driven revision strategy (DDRS-MCBR) was applied to improve the original dual case-based reasoning model method system, and screening and decision-making was performed for SCCM using this model. Third, an actual environmental pollution accident from 2012 was used as a case study to verify the material base, case base, and screening model. The results demonstrated that the DDRS-MCBR method was fast, efficient, and practical. The DDRS-MCBR method changes the passive situation in which the choice of SCCM screening depends only on the subjective experience of the decision maker and offers a new approach to screening SCCM.

Qualitative Case Study Exploring Operational Barriers Impeding Small and Private, Nonprofit Higher Education Institutions from Implementing Information Security Controls

ERIC Educational Resources Information Center

Liesen, Joseph J.

2017-01-01

The higher education industry uses the very latest technologies to effectively prepare students for their careers, but these technologies often contain vulnerabilities that can be exploited via their connection to the Internet. The complex task of securing information and computing systems is made more difficult at institutions of higher education…

Dependent convergence: the importation of technological hazards by semiperipheral countries.

PubMed

Siqueira, C E; Levenstein, C

2000-01-01

This article complements the substantial body of literature produced over the last three decades on the export of hazards from developed countries to developing countries. After reviewing the central arguments proposed by this literature, the authors add to the debate by focusing on the role of national actors in the importation of these hazards, based on the experience of late 1970s' developments in the petrochemical industry in Brazil. The Brazilian case indicates that social struggles and/or interactions among actors in developing and developed nations determine to what extent hazardous technologies are imported without environmental controls and to what extent their hazardous effects are controlled by these nations. This study suggests that the future development of a more inclusive theory of export-import of hazardous technologies and products should take into account the dialectical relationship established between social actors internal to the exporting and importing countries.

Process Control in Production-Worthy Plasma Doping Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winder, Edmund J.; Fang Ziwei; Arevalo, Edwin

2006-11-13

As the semiconductor industry continues to scale devices of smaller dimensions and improved performance, many ion implantation processes require lower energy and higher doses. Achieving these high doses (in some cases {approx}1x1016 ions/cm2) at low energies (<3 keV) while maintaining throughput is increasingly challenging for traditional beamline implant tools because of space-charge effects that limit achievable beam density at low energies. Plasma doping is recognized as a technology which can overcome this problem. In this paper, we highlight the technology available to achieve process control for all implant parameters associated with modem semiconductor manufacturing.

Interoperable Architecture for Command and Control

DTIC Science & Technology

2014-06-01

defined objective. Elements can include other systems, people, processes, technology and other support elements (Adapted from [9]). Enterprise System...An enterprise is an intentionally created entity of human endeavour with a certain purpose. An enterprise could be considered a type of system [7]. In...this case the enterprise is a Defence Enterprise System required by government as a tool to maintain national sovereignty. Capability

The Role of Training and Skilled Labour in the Success of SMEs in Developing Economies

ERIC Educational Resources Information Center

Robertson, Paul L.

2003-01-01

The ability of small and medium-sized enterprises in developing nations to evolve technologically is frequently constrained by a variety of environmental factors that are beyond their control. In many cases, it is necessary for the strategy of SMEs to be aligned with the international supply chain strategies of multinational firms, who can provide…

Mobile Learning: Two Case Studies of Supporting Inquiry Learning in Informal and Semiformal Settings

ERIC Educational Resources Information Center

Jones, Ann C.; Scanlon, Eileen; Clough, Gill

2013-01-01

Mobile technologies can support learning across different contexts as their portability enables them to be used by the learner in whichever context she or he is in. They can be particularly beneficial in informal and semiformal contexts where learners have more control over their learning goals and where motivation is often high. Inquiries in…

40 CFR 432.32 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2014 CFR

2014-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... facilities must achieve the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of...

40 CFR 432.32 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... facilities must achieve the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of...

40 CFR 432.32 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... facilities must achieve the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of...

40 CFR 432.32 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2012 CFR

2012-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... facilities must achieve the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of...

40 CFR 432.32 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2013 CFR

2013-07-01

... maximum monthly average limitation. 4 May be measured as hexane extractable material (HEM). (2) In... facilities must achieve the following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of...

Induced Fit in Protein Multimerization: The HFBI Case

PubMed Central

Riccardi, Laura

2016-01-01

Hydrophobins, produced by filamentous fungi, are small amphipathic proteins whose biological functions rely on their unique surface-activity properties. Understanding the mechanistic details of the multimerization process is of primary importance to clarify the interfacial activity of hydrophobins. We used free energy calculations to study the role of a flexible β-hairpin in the multimerization process in hydrophobin II from Trichoderma reesei (HFBI). We characterized how the displacement of this β-hairpin controls the stability of the monomers/dimers/tetramers in solution. The regulation of the oligomerization equilibrium of HFBI will necessarily affect its interfacial properties, fundamental for its biological function and for technological applications. Moreover, we propose possible routes for the multimerization process of HFBI in solution. This is the first case where a mechanism by which a flexible loop flanking a rigid patch controls the protein-protein binding equilibrium, already known for proteins with charged binding hot-spots, is described within a hydrophobic patch. PMID:27832079

Partial AZFc duplications not deletions are associated with male infertility in the Yi population of Yunnan Province, China.

PubMed

Ye, Jun-jie; Ma, Li; Yang, Li-juan; Wang, Jin-huan; Wang, Yue-li; Guo, Hai; Gong, Ning; Nie, Wen-hui; Zhao, Shu-hua

2013-09-01

There are many reports on associations between spermatogenesis and partial azoospermia factor c (AZFc) deletions as well as duplications; however, results are conflicting, possibly due to differences in methodology and ethnic background. The purpose of this study is to investigate the association of AZFc polymorphisms and male infertility in the Yi ethnic population, residents within Yunnan Province, China. A total of 224 infertile patients and 153 fertile subjects were selected in the Yi ethnic population. The study was performed by sequence-tagged site plus/minus (STS+/-) analysis followed by gene dosage and gene copy definition analysis. Y haplotypes of 215 cases and 115 controls were defined by 12 binary markers using single nucleotide polymorphism on Y chromosome (Y-SNP) multiplex assays based on single base primer extension technology. The distribution of Y haplotypes was not significantly different between the case and control groups. The frequencies of both gr/gr (7.6% vs. 8.5%) and b2/b3 (6.3% vs. 8.5%) deletions do not show significant differences. Similarly, single nucleotide variant (SNV) analysis shows no significant difference of gene copy definition between the cases and controls. However, the frequency of partial duplications in the infertile group (4.0%) is significantly higher than that in the control group (0.7%). Further, we found a case with sY1206 deletion which had two CDY1 copies but removed half of DAZ genes. Our results show that male infertility is associated with partial AZFc duplications, but neither gr/gr nor b2/b3 deletions, suggesting that partial AZFc duplications rather than deletions are risk factors for male infertility in Chinese-Yi population.

Bringing the Classroom into the World: Three Reflective Case Studies of Designing Mobile Technology to Support Blended Learning for the Built and Landscaped Environment

ERIC Educational Resources Information Center

Smith, Wally; Lewi, Hannah; Saniga, Andrew; Stickells, Lee; Constantinidis, Dora

2017-01-01

We report and reflect on three projects, carried out by us as educators and technology researchers over a four year period, that explore the use of mobile technologies in the fieldwork of Australian tertiary students of architectural history, landscape history and urban design. Treating these as three case studies, our focus is on the emerging…

Technology for low cost solid rocket boosters.

NASA Technical Reports Server (NTRS)

Ciepluch, C.

1971-01-01

A review of low cost large solid rocket motors developed at the Lewis Research Center is given. An estimate is made of the total cost reduction obtainable by incorporating this new technology package into the rocket motor design. The propellant, case material, insulation, nozzle ablatives, and thrust vector control are discussed. The effect of the new technology on motor cost is calculated for a typical expandable 260-in. booster application. Included in the cost analysis is the influence of motor performance variations due to specific impulse and weight changes. It is found for this application that motor costs may be reduced by up to 30% and that the economic attractiveness of future large solid rocket motors will be improved when the new technology is implemented.

Case Comparisons: An Efficient Way of Learning Radiology.

PubMed

Kok, Ellen M; de Bruin, Anique B H; Leppink, Jimmie; van Merriënboer, Jeroen J G; Robben, Simon G F

2015-10-01

Radiologists commonly use comparison films to improve their differential diagnosis. Educational literature suggests that this technique might also be used to bolster the process of learning to interpret radiographs. We investigated the effectiveness of three comparison techniques in medical students, whom we invited to compare cases of the same disease (same-disease comparison), cases of different diseases (different-disease comparison), disease images with normal images (disease/normal comparison), and identical images (no comparison/control condition). Furthermore, we used eye-tracking technology to investigate which elements of the two cases were compared by the students. We randomly assigned 84 medical students to one of four conditions and had them study different diseases on chest radiographs, while their eye movements were being measured. Thereafter, participants took two tests that measured diagnostic performance and their ability to locate diseases, respectively. Students studied most efficiently in the same-disease and different-disease comparison conditions: test 1, F(3, 68) = 3.31, P = .025, ηp(2) = 0.128; test 2, F(3, 65) = 2.88, P = .043, ηp(2) = 0.117. We found that comparisons were effected in 91% of all trials (except for the control condition). Comparisons between normal anatomy were particularly common (45.8%) in all conditions. Comparing cases can be an efficient way of learning to interpret radiographs, especially when the comparison technique used is specifically tailored to the learning goal. Eye tracking provided insight into the comparison process, by showing that few comparisons were made between abnormalities, for example. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

ENGINEERING BULLETIN: LANDFILL COVERS

EPA Science Inventory

Landfill covers are used at Superfund sites to minimize surface water infiltration and control gas migration. In many cases covers are used in conjunction with other waste treatment technologies, such as slurry walls, ground water pump-and-treat systems, and gas collection. This ...

Test Cases for the Benchmark Active Controls: Spoiler and Control Surface Oscillations and Flutter

NASA Technical Reports Server (NTRS)

Bennett, Robert M.; Scott, Robert C.; Wieseman, Carol D.

2000-01-01

As a portion of the Benchmark Models Program at NASA Langley, a simple generic model was developed for active controls research and was called BACT for Benchmark Active Controls Technology model. This model was based on the previously-tested Benchmark Models rectangular wing with the NACA 0012 airfoil section that was mounted on the Pitch and Plunge Apparatus (PAPA) for flutter testing. The BACT model had an upper surface spoiler, a lower surface spoiler, and a trailing edge control surface for use in flutter suppression and dynamic response excitation. Previous experience with flutter suppression indicated a need for measured control surface aerodynamics for accurate control law design. Three different types of flutter instability boundaries had also been determined for the NACA 0012/PAPA model, a classical flutter boundary, a transonic stall flutter boundary at angle of attack, and a plunge instability near M = 0.9. Therefore an extensive set of steady and control surface oscillation data was generated spanning the range of the three types of instabilities. This information was subsequently used to design control laws to suppress each flutter instability. There have been three tests of the BACT model. The objective of the first test, TDT Test 485, was to generate a data set of steady and unsteady control surface effectiveness data, and to determine the open loop dynamic characteristics of the control systems including the actuators. Unsteady pressures, loads, and transfer functions were measured. The other two tests, TDT Test 502 and TDT Test 5 18, were primarily oriented towards active controls research, but some data supplementary to the first test were obtained. Dynamic response of the flexible system to control surface excitation and open loop flutter characteristics were determined during Test 502. Loads were not measured during the last two tests. During these tests, a database of over 3000 data sets was obtained. A reasonably extensive subset of the data sets from the first two tests have been chosen for Test Cases for computational comparisons concentrating on static conditions and cases with harmonically oscillating control surfaces. Several flutter Test Cases from both tests have also been included. Some aerodynamic comparisons with the BACT data have been made using computational fluid dynamics codes at the Navier-Stokes level (and in the accompanying chapter SC). Some mechanical and active control studies have been presented. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. Cases for static angles of attack, static trailing-edge and upper-surface spoiler deflections are included for a range of conditions near those for the oscillation cases. Cases for trailing-edge control and upper-surface spoiler oscillations for a range of Mach numbers, angle of attack, and static control deflections are included. Cases for all three types of flutter instability are selected. In addition some cases are included for dynamic response measurements during forced oscillations of the controls on the flexible mount. An overview of the model and tests is given, and the standard formulary for these data is listed. Some sample data and sample results of calculations are presented. Only the static pressures and the first harmonic real and imaginary parts of the pressures are included in the data for the Test Cases, but digitized time histories have been archived. The data for the Test Cases are also available as separate electronic files.

A computer network with scada and case tools for on-line process control in greenhouses

NASA Astrophysics Data System (ADS)

Gieling, Th. H.; van Meurs, W. Th. M.; Janssen, H. J. J.

Climate control computers in greenhouses are used to control heating and ventilation, supply water and dilute and dispense nutrients. They integrate models into optimally controlled systems. This paper describes how information technology, as in use in other sectors of industry, is applied to greenhouse control. The introduction of modern software and hardware concepts in horticulture adds power and extra opportunities to climate control in greenhouses.

The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

PubMed

Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

2006-12-01

Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

The political economy of United States multiutilities: The United States electric power industry and communication services

NASA Astrophysics Data System (ADS)

Quail, Christine M.

This study consists of a political economic analysis of the multiutility industry, the industry located at the confluence of electric utilities, telephone, cable, and Internet markets. The study uses a theoretical framework based in political economy and urban theory. Methodologies used include industrial analysis and instrumental analysis. A discussion of technological convergence establishes the technical means by which multiutilities developed. Refusing technological determinism, however, the study presents a critical analysis of the history, philosophy, and regulation of utilities. Distinctions are made between public and private ownership structures in the electric utility industry. Next, the study embarks on an industrial analysis of the multiutility industry. The industrial analysis includes a discussion of the industry's history, markets, ownership types, and legal struggles. Following the broad industrial overview, two case studies are presented: Hawarden Integrated Technology, Energy and Communications (HITEC), and Con Edison Communications, LLC. HITEC is a public multiutility in the City of Hawarden, Iowa. Con Edison Communications is a private multiutility, based in New York City. The case studies provide a vehicle by which theoretical and philosophical underpinnings, as well as general trends, in the multiutility industry are localized and concretized. Finally, the study draws conclusions about the nature, history, and future of public versus private control of multiutilities' converged communications infrastructures. Questions of democratic control of media infrastructures are raised.

Use of laser in orthodontics: applications and perspectives

PubMed Central

Fornaini, C; Merigo, E; Vescovi, P; Lagori, G; Rocca, JP

2013-01-01

Laser technology got in these years a more and more important role in modern dentistry and, recently, also in orthodontics was proposed the utilization of laser devices. The aim of this work is to describe the utilization of this technology both in soft and hard oral tissues to improve orthodontic treatment. Several cases, with different wavelengths (532, 810, 980, 1064, 2940 and 10600 nm) and in different times of the treatment (before, during and after) are presented. All the cases reported showed, according to the literature, that the use of the laser related to orthodontic treatment offers several advantages when compared with conventional methods. In the soft tissues surgery it allows to reduce or eliminate the use of anesthetic injection, to avoid use of sutures and to bond bracket in dry enamel; associated with orthophosphoric acid, it gives a stronger adhesion of the brackets to the enamel and, in the case of porcelain brackets, it detaches them without damages; at low power (LLLT) it permits to control the pain of the first period after bonding and, by increasing the speed of teeth movement in the bone, reduces the time of the treatment. PMID:24155556

Management strategies on the industrialization road of state-of-the-art technologies for e-waste recycling: the case study of electrostatic separation--a review.

PubMed

Xue, Mianqiang; Li, Jia; Xu, Zhenming

2013-02-01

Electronic waste (e-waste) management is pressing as global production has increased significantly in the past few years and is rising continuously at a fast rate. Many countries are facing hazardous e-waste mountains, most of which are disposed of by backyard recyclers, creating serious threats to public health and ecosystems. Industrialization of state-of-the-art recycling technologies is imperative to enhance the comprehensive utilization of resources and to protect the environment. This article aims to provide an overview of management strategies solving the crucial problems during the process of industrialization. A typical case study of electrostatic separation for recycling waste printed circuit boards was discussed in terms of parameters optimization, materials flow control, noise assessment, risk assessment, economic evaluation and social benefits analysis. The comprehensive view provided by the review could be helpful to the progress of the e-waste recycling industry.

Optimization under variability and uncertainty: a case study for NOx emissions control for a gasification system.

PubMed

Chen, Jianjun; Frey, H Christopher

2004-12-15

Methods for optimization of process technologies considering the distinction between variability and uncertainty are developed and applied to case studies of NOx control for Integrated Gasification Combined Cycle systems. Existing methods of stochastic optimization (SO) and stochastic programming (SP) are demonstrated. A comparison of SO and SP results provides the value of collecting additional information to reduce uncertainty. For example, an expected annual benefit of 240,000 dollars is estimated if uncertainty can be reduced before a final design is chosen. SO and SP are typically applied to uncertainty. However, when applied to variability, the benefit of dynamic process control is obtained. For example, an annual savings of 1 million dollars could be achieved if the system is adjusted to changes in process conditions. When variability and uncertainty are treated distinctively, a coupled stochastic optimization and programming method and a two-dimensional stochastic programming method are demonstrated via a case study. For the case study, the mean annual benefit of dynamic process control is estimated to be 700,000 dollars, with a 95% confidence range of 500,000 dollars to 940,000 dollars. These methods are expected to be of greatest utility for problems involving a large commitment of resources, for which small differences in designs can produce large cost savings.

The sexual games of the body politic: fantasy and state violence in Northern Ireland.

PubMed

Aretxaga, B

2001-03-01

This article analyzes the practice of strip searching women political prisoners in Northern Ireland as a violent technology of control aimed at breaking the political identity of prisoners. Focusing on a controversial case of a mass strip search carried out in 1992, the article examines the phantasmatic investements pervading this seemingly rational technology of control. Using a psychoanalytic notion of fantasy against the backdrop of a Foucaultian theory of power, this article argues that strip searches constitute a gendered form of political domination driven by, and performed within, a phantasmatic scenario of sexual violence. In this scenario both the political and gender identities of prisoners are re-inscribed with the power of a state acting as a male body politic. The article argues that the phantasmatic support of rational technologies of control betrays the contingent and shifting character of domination as well as its ambiguous effects.

Trends in communicative access solutions for children with cerebral palsy.

PubMed

Myrden, Andrew; Schudlo, Larissa; Weyand, Sabine; Zeyl, Timothy; Chau, Tom

2014-08-01

Access solutions may facilitate communication in children with limited functional speech and motor control. This study reviews current trends in access solution development for children with cerebral palsy, with particular emphasis on the access technology that harnesses a control signal from the user (eg, movement or physiological change) and the output device (eg, augmentative and alternative communication system) whose behavior is modulated by the user's control signal. Access technologies have advanced from simple mechanical switches to machine vision (eg, eye-gaze trackers), inertial sensing, and emerging physiological interfaces that require minimal physical effort. Similarly, output devices have evolved from bulky, dedicated hardware with limited configurability, to platform-agnostic, highly personalized mobile applications. Emerging case studies encourage the consideration of access technology for all nonverbal children with cerebral palsy with at least nascent contingency awareness. However, establishing robust evidence of the effectiveness of the aforementioned advances will require more expansive studies. © The Author(s) 2014.

Description and process evaluation of pharmacists' interventions in a pharmacist-led information technology-enabled multicentre cluster randomised controlled trial for reducing medication errors in general practice (PINCER trial).

PubMed

Howard, Rachel; Rodgers, Sarah; Avery, Anthony J; Sheikh, Aziz

2014-02-01

To undertake a process evaluation of pharmacists' recommendations arising in the context of a complex IT-enabled pharmacist-delivered randomised controlled trial (PINCER trial) to reduce the risk of hazardous medicines management in general practices. PINCER pharmacists manually recorded patients' demographics, details of interventions recommended, actions undertaken by practice staff and time taken to manage individual cases of hazardous medicines management. Data were coded, double-entered into SPSS version 15 and then summarised using percentages for categorical data (with 95% confidence interval (CI)) and, as appropriate, means (± standard deviation) or medians (interquartile range) for continuous data. Pharmacists spent a median of 20 min (interquartile range 10, 30) reviewing medical records, recommending interventions and completing actions in each case of hazardous medicines management. Pharmacists judged 72% (95% CI 70, 74; 1463/2026) of cases of hazardous medicines management to be clinically relevant. Pharmacists recommended 2105 interventions in 74% (95% CI 73, 76; 1516/2038) of cases and 1685 actions were taken in 61% (95% CI 59, 63; 1246/2038) of cases; 66% (95% CI 64, 68; 1383/2105) of interventions recommended by pharmacists were completed and 5% (95% CI 4, 6; 104/2105) of recommendations were accepted by general practitioners (GPs), but not completed at the end of the pharmacists' placement; the remaining recommendations were rejected or considered not relevant by GPs. The outcome measures were used to target pharmacist activity in general practice towards patients at risk from hazardous medicines management. Recommendations from trained PINCER pharmacists were found to be broadly acceptable to GPs and led to ameliorative action in the majority of cases. It seems likely that the approach used by the PINCER pharmacists could be employed by other practice pharmacists following appropriate training. © 2013 The Authors. International Journal of Pharmacy Practice published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society.

A sham case-control study of effectiveness of DTP-Hib-hepatitis B vaccine against rotavirus acute gastroenteritis in Kenya

PubMed Central

2014-01-01

Background In many GAVI-eligible countries, effectiveness of new vaccines will be evaluated by case-control methodology. To inform the design and assess selection bias of a future case-control study of rotavirus vaccine effectiveness (VE) in western Kenya, we performed a sham case-control study evaluating VE of pentavalent vaccine (DTP-Hib-HepB) against rotavirus acute gastroenteritis (AGE). Methods From ongoing rotavirus surveillance, we defined cases as children 12 weeks to 23 months old with EIA-confirmed rotavirus AGE. We enrolled one community-based and two hospital-based control groups. We collected vaccination status from cards at enrollment, or later in homes, and evaluated VE by logistic regression. Results We enrolled 91 cases (64 inpatient, 27 outpatient), 252 non-rotavirus AGE facility-based controls (unmatched), 203 non-AGE facility-based controls (age-matched) and 271 community controls (age-matched). Documented receipt of 3 pentavalent doses was 77% among cases and ranged from 81-86% among controls. One percent of cases and 0-2% of controls had no pentavalent doses. The adjusted odds ratio of three versus zero doses for being a case was 3.27 (95% CI 0.01-1010) for community controls and 0.69 (95% CI 0.06-7.75) for non-rotavirus hospital-based AGE controls, translating to VE of -227% and 31%, respectively, with wide confidence intervals. (No facility-based non-AGE controls were unvaccinated.) Similar results were found for ≥2 pentavalent doses and for severe rotavirus AGE. Conclusions The study showed that it is feasible to carry out a real case control in the study area, but this needs to be done as soon as the vaccine is introduced to capture the real impact. Sham case-control or pilot studies before vaccine introduction can be useful in designing case-control VE studies. PMID:24517198

A sham case-control study of effectiveness of DTP-Hib-hepatitis B vaccine against rotavirus acute gastroenteritis in Kenya.

PubMed

Khagayi, Sammy; Tate, Jacqueline E; Onkoba, Reuben; Parashar, Umesh; Odhiambo, Frank; Burton, Deron; Laserson, Kayla; Feikin, Daniel R

2014-02-11

In many GAVI-eligible countries, effectiveness of new vaccines will be evaluated by case-control methodology. To inform the design and assess selection bias of a future case-control study of rotavirus vaccine effectiveness (VE) in western Kenya, we performed a sham case-control study evaluating VE of pentavalent vaccine (DTP-Hib-HepB) against rotavirus acute gastroenteritis (AGE). From ongoing rotavirus surveillance, we defined cases as children 12 weeks to 23 months old with EIA-confirmed rotavirus AGE. We enrolled one community-based and two hospital-based control groups. We collected vaccination status from cards at enrollment, or later in homes, and evaluated VE by logistic regression. We enrolled 91 cases (64 inpatient, 27 outpatient), 252 non-rotavirus AGE facility-based controls (unmatched), 203 non-AGE facility-based controls (age-matched) and 271 community controls (age-matched). Documented receipt of 3 pentavalent doses was 77% among cases and ranged from 81-86% among controls. One percent of cases and 0-2% of controls had no pentavalent doses. The adjusted odds ratio of three versus zero doses for being a case was 3.27 (95% CI 0.01-1010) for community controls and 0.69 (95% CI 0.06-7.75) for non-rotavirus hospital-based AGE controls, translating to VE of -227% and 31%, respectively, with wide confidence intervals. (No facility-based non-AGE controls were unvaccinated.) Similar results were found for ≥2 pentavalent doses and for severe rotavirus AGE. The study showed that it is feasible to carry out a real case control in the study area, but this needs to be done as soon as the vaccine is introduced to capture the real impact. Sham case-control or pilot studies before vaccine introduction can be useful in designing case-control VE studies.

[The study of functional status in the perception of visual information depending on the method of technical color mixing on LCD and DLP projectors technology].

PubMed

Merkulova, A G; Osokina, E S; Bukhtiiarov, I V

2014-10-01

The case of compare two ways of projection color visual images, characterized by different spatial-temporal characteristics of visual stimuli, presents the methodology and the set of techniques. Received comparative data, identifying risks of regulation disorder of the functional state and development general, mental and visual fatigue during prolonged strenuous visual activity, according to two types of test tasks, which are the most typical for the use of modern projectors to work with the audience, both inthe process of implementation of learning technologies and the collective take responsible decisions by expert groups that control of complex technological processes.

Modifiable risk factors for typhoid intestinal perforations during a large outbreak of typhoid fever, Kampala Uganda, 2015.

PubMed

Bulage, Lilian; Masiira, Ben; Ario, Alex R; Matovu, Joseph K B; Nsubuga, Peter; Kaharuza, Frank; Nankabirwa, Victoria; Routh, Janell; Zhu, Bao-Ping

2017-09-25

Between January and June, 2015, a large typhoid fever outbreak occurred in Kampala, Uganda, with 10,230 suspected cases. During the outbreak, area surgeons reported a surge in cases of typhoid intestinal perforation (TIP), a complication of typhoid fever. We conducted an investigation to characterize TIP cases and identify modifiable risk factors for TIP. We defined a TIP case as a physician-diagnosed typhoid patient with non-traumatic terminal ileum perforation. We identified cases by reviewing medical records at all five major hospitals in Kampala from 2013 to 2015. In a matched case-control study, we compared potential risk factors among TIP cases and controls; controls were typhoid patients diagnosed by TUBEX TF, culture, or physician but without TIP, identified from the outbreak line-list and matched to cases by age, sex and residence. Cases and controls were interviewed using a standard questionnaire from 1st -23rd December 2015. We used conditional logistic regression to assess risk factors for TIP and control for confounding. Of the 88 TIP cases identified during 2013-2015, 77% (68/88) occurred between January and June, 2015; TIPs sharply increased in January and peaked in March, coincident with the typhoid outbreak. The estimated risk of TIP was 6.6 per 1000 suspected typhoid infections (68/10,230). The case-fatality rate was 10% (7/68). Cases sought care later than controls; Compared with 29% (13/45) of TIP cases and 63% (86/137) of controls who sought treatment within 3 days of onset, 42% (19/45) of cases and 32% (44/137) of controls sought treatment 4-9 days after illness onset (OR adj  = 2.2, 95%CI = 0.83-5.8), while 29% (13/45) of cases and 5.1% (7/137) of controls sought treatment ≥10 days after onset (OR adj  = 11, 95%CI = 1.9-61). 68% (96/141) of cases and 23% (23/100) of controls had got treatment before being treated at the treatment centre (OR adj  = 9.0, 95%CI = 1.1-78). Delay in seeking treatment increased the risk of TIPs. For future outbreaks, we recommended aggressive community case-finding, and informational campaigns in affected communities and among local healthcare providers to increase awareness of the need for early and appropriate treatment.

Scatterometry or imaging overlay: a comparative study

NASA Astrophysics Data System (ADS)

Hsu, Simon C. C.; Pai, Yuan Chi; Chen, Charlie; Yu, Chun Chi; Hsing, Henry; Wu, Hsing-Chien; Kuo, Kelly T. L.; Amir, Nuriel

2015-03-01

Most fabrication facilities today use imaging overlay measurement methods, as it has been the industry's reliable workhorse for decades. In the last few years, third-generation Scatterometry Overlay (SCOL™) or Diffraction Based Overlay (DBO-1) technology was developed, along another DBO technology (DBO-2). This development led to the question of where the DBO technology should be implemented for overlay measurements. Scatterometry has been adopted for high volume production in only few cases, always with imaging as a backup, but scatterometry overlay is considered by many as the technology of the future. In this paper we compare imaging overlay and DBO technologies by means of measurements and simulations. We outline issues and sensitivities for both technologies, providing guidelines for the best implementation of each. For several of the presented cases, data from two different DBO technologies are compared as well, the first with Pupil data access (DBO-1) and the other without pupil data access (DBO-2). Key indicators of overlay measurement quality include: layer coverage, accuracy, TMU, process robustness and robustness to process changes. Measurement data from real cases across the industry are compared and the conclusions are also backed by simulations. Accuracy is benchmarked with reference OVL, and self-consistency, showing good results for Imaging and DBO-1 technology. Process sensitivity and metrology robustness are mostly simulated with MTD (Metrology Target Designer) comparing the same process variations for both technologies. The experimental data presented in this study was done on ten advanced node layers and three production node layers, for all phases of the IC fabrication process (FEOL, MEOL and BEOL). The metrology tool used for most of the study is KLA-Tencor's Archer 500LCM system (scatterometry-based and imaging-based measurement technologies on the same tool) another type of tool is used for DBO-2 measurements. Finally, we conclude that both imaging overlay technology and DBO-1 technology are fully successful and have a valid roadmap for the next few design nodes, with some use cases better suited for one or the other measurement technologies. Having both imaging and DBO technology options available in parallel, allows Overlay Engineers a mix and match overlay measurement strategy, providing back up when encountering difficulties with one of the technologies and benefiting from the best of both technologies for every use case.

Benzene exposure in the petroleum distribution industry associated with leukemia in the United Kingdom: overview of the methodology of a case-control study.

PubMed Central

Rushton, L

1996-01-01

This paper describes basic principles underlying the methodology for obtaining quantitative estimates of benzene exposure in the petroleum marketing and distribution industry. Work histories for 91 cases of leukemia and 364 matched controls (4 per case) identified for a cohort of oil distribution workers up to the end of 1992 were obtained, primarily from personnel records. Information on the distribution sites, more than 90% of which were closed at the time of data collection, was obtained from site visits and archive material. Industrial hygiene measurements measured under known conditions were assembled for different tasks. These were adjusted for conditions where measured data were not available using variables known to influence exposure, such as temperature, technology, percentage of benzene in fuel handled, products handled, number of loads, and job activity. A quantitative estimate of dermal contact and peak exposure was also made. PMID:9118922

A strategy to decide whether to move the last case of the day in an operating room to another empty operating room to decrease overtime labor costs.

PubMed

Dexter, F

2000-10-01

We examined how to program an operating room (OR) information system to assist the OR manager in deciding whether to move the last case of the day in one OR to another OR that is empty to decrease overtime labor costs. We first developed a statistical strategy to predict whether moving the case would decrease overtime labor costs for first shift nurses and anesthesia providers. The strategy was based on using historical case duration data stored in a surgical services information system. Second, we estimated the incremental overtime labor costs achieved if our strategy was used for moving cases versus movement of cases by an OR manager who knew in advance exactly how long each case would last. We found that if our strategy was used to decide whether to move cases, then depending on parameter values, only 2.0 to 4.3 more min of overtime would be required per case than if the OR manager had perfect retrospective knowledge of case durations. The use of other information technologies to assist in the decision of whether to move a case, such as real-time patient tracking information systems, closed-circuit cameras, or graphical airport-style displays can, on average, reduce overtime by no more than only 2 to 4 min per case that can be moved. The use of other information technologies to assist in the decision of whether to move a case, such as real-time patient tracking information systems, closed-circuit cameras, or graphical airport-style displays, can, on average, reduce overtime by no more than only 2 to 4 min per case that can be moved.

Is case-chaos methodology an appropriate alternative to conventional case-control studies for investigating outbreaks?

PubMed

Edelstein, Michael; Wallensten, Anders; Kühlmann-Berenzon, Sharon

2014-08-15

Case-chaos methodology is a proposed alternative to case-control studies that simulates controls by randomly reshuffling the exposures of cases. We evaluated the method using data on outbreaks in Sweden. We identified 5 case-control studies from foodborne illness outbreaks that occurred between 2005 and 2012. Using case-chaos methodology, we calculated odds ratios 1,000 times for each exposure. We used the median as the point estimate and the 2.5th and 97.5th percentiles as the confidence interval. We compared case-chaos matched odds ratios with their respective case-control odds ratios in terms of statistical significance. Using Spearman's correlation, we estimated the correlation between matched odds ratios and the proportion of cases exposed to each exposure and quantified the relationship between the 2 using a normal linear mixed model. Each case-control study identified an outbreak vehicle (odds ratios = 4.9-45). Case-chaos methodology identified the outbreak vehicle 3 out of 5 times. It identified significant associations in 22 of 113 exposures that were not associated with outcome and 5 of 18 exposures that were significantly associated with outcome. Log matched odds ratios correlated with their respective proportion of cases exposed (Spearman ρ = 0.91) and increased significantly with the proportion of cases exposed (b = 0.054). Case-chaos methodology missed the outbreak source 2 of 5 times and identified spurious associations between a number of exposures and outcome. Measures of association correlated with the proportion of cases exposed. We recommended against using case-chaos analysis during outbreak investigations. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Electronic/electric technology benefits study. [avionics

NASA Technical Reports Server (NTRS)

Howison, W. W.; Cronin, M. J.

1982-01-01

The benefits and payoffs of advanced electronic/electric technologies were investigated for three types of aircraft. The technologies, evaluated in each of the three airplanes, included advanced flight controls, advanced secondary power, advanced avionic complements, new cockpit displays, and advanced air traffic control techniques. For the advanced flight controls, the near term considered relaxed static stability (RSS) with mechanical backup. The far term considered an advanced fly by wire system for a longitudinally unstable airplane. In the case of the secondary power systems, trades were made in two steps: in the near term, engine bleed was eliminated; in the far term bleed air, air plus hydraulics were eliminated. Using three commercial aircraft, in the 150, 350, and 700 passenger range, the technology value and pay-offs were quantified, with emphasis on the fiscal benefits. Weight reductions deriving from fuel saving and other system improvements were identified and the weight savings were cycled for their impact on TOGW (takeoff gross weight) and upon the performance of the airframes/engines. Maintenance, reliability, and logistic support were the other criteria.

Combining matched and unmatched control groups in case-control studies.

PubMed

le Cessie, Saskia; Nagelkerke, Nico; Rosendaal, Frits R; van Stralen, Karlijn J; Pomp, Elisabeth R; van Houwelingen, Hans C

2008-11-15

Multiple control groups in case-control studies are used to control for different sources of confounding. For example, cases can be contrasted with matched controls to adjust for multiple genetic or unknown lifestyle factors and simultaneously contrasted with an unmatched population-based control group. Inclusion of different control groups for a single exposure analysis yields several estimates of the odds ratio, all using only part of the data. Here the authors introduce an easy way to combine odds ratios from several case-control analyses with the same cases. The approach is based upon methods used for meta-analysis but takes into account the fact that the same cases are used and that the estimated odds ratios are therefore correlated. Two ways of estimating this correlation are discussed: sandwich methodology and the bootstrap. Confidence intervals for the pooled estimates and a test for checking whether the odds ratios in the separate case-control studies differ significantly are derived. The performance of the method is studied by simulation and by applying the methods to a large study on risk factors for thrombosis, the MEGA Study (1999-2004), wherein cases with first venous thrombosis were included with a matched control group of partners and an unmatched population-based control group.

The Italian regulation on Assisted Reproductive Technologies facing the European Court of Human Rights: the case of Costa and Pavan v. Italy.

PubMed

Penasa, Simone

2012-01-01

This article will describe the current legal framework on Assisted Reproduction Technology (ART) regulation in Italy, taking into account recent case-law derived from the implementation of the Law 40 of 2004 on ART. Special attention will be devoted to the case of Costa and Pavan v. Italy, recently decided by the Tenth Session of the European Court of Human Rights (ECtHR). In that decision, the European Court declared the incompatibility of the ban to pre-implantation genetic diagnosis introduced by the abovementioned Italian law on ART. The case will be analysed from a dual perspective. On the one hand, it will be considered in the light of the ECtHR case-law, in order to derive systematic aspects of continuity or discontinuity between the former and the latter2. On the other hand, the case will be considered in the light of its concrete and prospective impact on the Italian legal approach to ART regulation, considering especially the direct and indirect influence of the case: e.g., its possible utilisation by Italian judges when they are called upon to implement Law 40.

A computer network with SCADA and case tools for on-line process control in greenhouses.

PubMed

Gieling ThH; van Meurs WTh; Janssen, H J

1996-01-01

Climate control computers in greenhouses are used to control heating and ventilation, supply water and dilute and dispense nutrients. They integrate models into optimally controlled systems. This paper describes how information technology, as in use in other sectors of industry, is applied to greenhouse control. The introduction of modern software and hardware concepts in horticulture adds power and extra oppurtunities to climate contol in greenhouses.

Workflow technology: the new frontier. How to overcome the barriers and join the future.

PubMed

Shefter, Susan M

2006-01-01

Hospitals are catching up to the business world in the introduction of technology systems that support professional practice and workflow. The field of case management is highly complex and interrelates with diverse groups in diverse locations. The last few years have seen the introduction of Workflow Technology Tools, which can improve the quality and efficiency of discharge planning by the case manager. Despite the availability of these wonderful new programs, many case managers are hesitant to adopt the new technology and workflow. For a myriad of reasons, a computer-based workflow system can seem like a brick wall. This article discusses, from a practitioner's point of view, how professionals can gain confidence and skill to get around the brick wall and join the future.

Health information system model for monitoring treatment and surveillance for leprosy patients in indonesia (case study in Pekalongan District, Central Java, Indonesia).

PubMed

Rachmani, Enny; Kurniadi, Arif; Hsu, Chien Yeh

2013-01-01

After India and Brazil, Indonesia has the third highest incidence/prevalence of leprosy in the world. Every year thousands of new cases and case with grade-2 disability are reported and, while the recovery rate lingers only 80-90 %. Therefore, more than 10 % of leprosy patients drop out of treatment and can be a source of new infections in the community. Our research was aimed at determining apparent difficulties in the leprosy control program as well as how a health information system (HIS) could assist the Indonesian leprosy control program. We used qualitative method with deep interview and observation of document. One of the difficulties which the Indonesian leprosy control program faces is discontinuity of patient's data due to rotating staff as well as the treatment monitoring and queries patients which should be monitored after treatment has ceased. Technology implementation is feasible through short message service (sms) reminders and web base applications. The leprosy control program urgently needs to implement continuous monitoring and recording of patients because of the particular characteristics of this contagious disease.

Environmental control and life support technologies for advanced manned space missions

NASA Technical Reports Server (NTRS)

Powell, F. T.; Wynveen, R. A.; Lin, C.

1986-01-01

Regenerative environmental control and life support system (ECLSS) technologies are found by the present evaluation to have reached a degree of maturity that recommends their application to long duration manned missions. The missions for which regenerative ECLSSs are attractive in virtue of the need to avoid expendables and resupply requirements have been identified as that of the long duration LEO Space Station, long duration stays at GEO, a permanently manned lunar base (or colony), manned platforms located at the earth-moon libration points L4 or L5, a Mars mission, deep space exploration, and asteroid exploration. A comparison is made between nonregenerative and regenerative ECLSSs in the cases of 10 essential functions.

Personalizing and Contextualizing Multimedia Case Methods in University-based Teacher Education: An Important Modification for Promoting Technological Design in School Science

NASA Astrophysics Data System (ADS)

Bencze, Larry; Hewitt, Jim; Pedretti, Erminia

2009-01-01

Results of various studies suggest that multimedia ‘case methods’ (activities associated with case documentaries) have many benefits in university-based teacher education contexts. They can, for example, help to ‘bridge the gap’ between perspectives and practices held by academic teacher educators and those held by student-teachers - who may adhere to perspectives and practices commonly supported in schools. On the other hand, some studies, along with theoretical arguments, suggest that there are limits to the effectiveness of multimedia case methods - because, for example, they can never fully represent realities of teaching and learning in schools. Furthermore, often missing from multimedia case methods is the student-teacher in the role of teacher. To address these concerns, we modified an existing multimedia case method by associating it with a special practice teaching situation in a school context. Qualitative data analyzed using constant comparative methods suggest that student-teachers engaged in this modified multimedia case method developed relatively deep commitments to encouraging students to conduct technology design projects - a non-traditional practice in school science. Factors that appeared to influence development of this motivation included student-teachers’ pre-instructional perspectives about science and the personalization and contextualization inherent to the modified multimedia case method.

Advanced automation in space shuttle mission control

NASA Technical Reports Server (NTRS)

Heindel, Troy A.; Rasmussen, Arthur N.; Mcfarland, Robert Z.

1991-01-01

The Real Time Data System (RTDS) Project was undertaken in 1987 to introduce new concepts and technologies for advanced automation into the Mission Control Center environment at NASA's Johnson Space Center. The project's emphasis is on producing advanced near-operational prototype systems that are developed using a rapid, interactive method and are used by flight controllers during actual Shuttle missions. In most cases the prototype applications have been of such quality and utility that they have been converted to production status. A key ingredient has been an integrated team of software engineers and flight controllers working together to quickly evolve the demonstration systems.

Investigating the Feasibility and Utility of Bedside Balance Technology Acutely After Pediatric Concussion: A Pilot Study.

PubMed

Rhine, Tara D; Byczkowski, Terri L; Clark, Ross A; Babcock, Lynn

2016-05-01

To examine postural instability in children acutely after concussion, using the Wii Balance Board (WBB). We hypothesized that children with traumatic brain injury would have significantly worse balance relative to children without brain injury. Prospective case-control pilot study. Emergency department of a tertiary urban pediatric hospital. Cases were a convenience sample 11-16 years old who presented within 6 hours of sustaining concussion. Two controls, matched on gender, height, and age, were enrolled for each case that completed study procedures. Controls were children who presented for a minor complaint that was unlikely to affect balance. Not applicable. The participant's postural sway expressed as the displacement in centimeters of the center of pressure during a timed balance task. Balance testing was performed using 4 stances (single or double limb, eyes open or closed). Three of the 17 (17.6%) cases were too dizzy to complete testing. One stance, double limbs eyes open, was significantly higher in cases versus controls (85.6 vs 64.3 cm, P = 0.04). A simple test on the WBB consisting of a 2-legged standing balance task with eyes open discriminated children with concussion from non-head-injured controls. The low cost and feasibility of this device make it a potentially viable tool for assessing postural stability in children with concussion for both longitudinal research studies and clinical care. These pilot data suggest that the WBB is an inexpensive tool that can be used on the sideline or in the outpatient setting to objectively identify and quantify postural instability.

Evaluation of Pneumococcal Load in Blood by Polymerase Chain Reaction for the Diagnosis of Pneumococcal Pneumonia in Young Children in the PERCH Study.

PubMed

Deloria Knoll, Maria; Morpeth, Susan C; Scott, J Anthony G; Watson, Nora L; Park, Daniel E; Baggett, Henry C; Brooks, W Abdullah; Feikin, Daniel R; Hammitt, Laura L; Howie, Stephen R C; Kotloff, Karen L; Levine, Orin S; O'Brien, Katherine L; Thea, Donald M; Ahmed, Dilruba; Antonio, Martin; Awori, Juliet O; Baillie, Vicky L; Chipeta, James; Deluca, Andrea N; Dione, Michel; Driscoll, Amanda J; Higdon, Melissa M; Jatapai, Anchalee; Karron, Ruth A; Mazumder, Razib; Moore, David P; Mwansa, James; Nyongesa, Sammy; Prosperi, Christine; Seidenberg, Phil; Siludjai, Duangkamon; Sow, Samba O; Tamboura, Boubou; Zeger, Scott L; Murdoch, David R; Madhi, Shabir A

2017-06-15

Detection of pneumococcus by lytA polymerase chain reaction (PCR) in blood had poor diagnostic accuracy for diagnosing pneumococcal pneumonia in children in 9 African and Asian sites. We assessed the value of blood lytA quantification in diagnosing pneumococcal pneumonia. The Pneumonia Etiology Research for Child Health (PERCH) case-control study tested whole blood by PCR for pneumococcus in children aged 1-59 months hospitalized with signs of pneumonia and in age-frequency matched community controls. The distribution of load among PCR-positive participants was compared between microbiologically confirmed pneumococcal pneumonia (MCPP) cases, cases confirmed for nonpneumococcal pathogens, nonconfirmed cases, and controls. Receiver operating characteristic analyses determined the "optimal threshold" that distinguished MCPP cases from controls. Load was available for 290 of 291 cases with pneumococcal PCR detected in blood and 273 of 273 controls. Load was higher in MCPP cases than controls (median, 4.0 × 103 vs 0.19 × 103 copies/mL), but overlapped substantially (range, 0.16-989.9 × 103 copies/mL and 0.01-551.9 × 103 copies/mL, respectively). The proportion with high load (≥2.2 log10 copies/mL) was 62.5% among MCPP cases, 4.3% among nonconfirmed cases, 9.3% among cases confirmed for a nonpneumococcal pathogen, and 3.1% among controls. Pneumococcal load in blood was not associated with respiratory tract illness in controls (P = .32). High blood pneumococcal load was associated with alveolar consolidation on chest radiograph in nonconfirmed cases, and with high (>6.9 log10 copies/mL) nasopharyngeal/oropharyngeal load and C-reactive protein ≥40 mg/L (both P < .01) in nonconfirmed cases but not controls. Quantitative pneumococcal PCR in blood has limited diagnostic utility for identifying pneumococcal pneumonia in individual children, but may be informative in epidemiological studies. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

SETDA Case Studies 2012

ERIC Educational Resources Information Center

State Educational Technology Directors Association, 2012

2012-01-01

The State Educational Technology Directors Association (SETDA) published a series of case studies from 28 states to showcase examples of how ARRA EETT ("American Recovery and Reinvestment Act of 2009 Enhancing Education Through Technology") grant funds have impacted teaching and learning. SETDA collected data for the case studies through…

Cases, Simulacra, and Semantic Web Technologies

ERIC Educational Resources Information Center

Carmichael, P.; Tscholl, M.

2013-01-01

"Ensemble" is an interdisciplinary research and development project exploring the potential role of emerging Semantic Web technologies in case-based learning across learning environments in higher education. Empirical findings have challenged the claim that cases "bring reality into the classroom" and that this, in turn, might…

Youth, Social Networking, and Resistance: A Case Study on a Multidimensional Approach to Resistance

ERIC Educational Resources Information Center

Scozzaro, David

2011-01-01

This exploratory case study focused on youth and resistance that was aided by the use of technology. The combination of resistance and technology expanded a multidimensional framework and leads to new insight into transformative resistance. This study examined the framework of transformative resistance based on Solorzano and Delgado Bernal's…

Multiple Case Study on Cyberbullying's Impacts on Adolescent Technology Use

ERIC Educational Resources Information Center

Thompson, Kent W.

2013-01-01

This multiple case study focused on whether and how cyberbullying had an impact on students' use of technology. Analysis of the lived experiences of the participants in this study added depth to the quantitative research previously conducted by others in this area. The conceptual framework was based on social learning theory, which suggested that…

Case Study on the Impact of Technology on Incivility in Higher Education

ERIC Educational Resources Information Center

Bartlett, Michelle E.; Bartlett, James E.

2016-01-01

A qualitative case study research design provided an in-depth perspective of the participants in relation to understanding the holistic impact technology has on the incivility of student-to-student and student-to-faculty interactions in higher education. The conceptual framework by Twale and Deluca (2008), based upon Salin's (2003) proposed model…

Management of Re-Occurring Cases of Examination Malpractice in Plateau State Collage of Health Technology Pankshin, Nigeria

ERIC Educational Resources Information Center

Dusu, Paul Bot; Gotan, Anthony; Deshi, Jummai M.; Gambo, Barashe

2016-01-01

Nigeria's educational system is gradually degenerating, as the sanctity of education process has been affected by malpractice. The purpose of this paper was to assess re-occurring incidence of examination malpractice in Plateau State College of Health Technology Pankshin, Nigeria. It looked at cases of examination malpractice and students'…

Developing Information Technology for Vocational Education in Contiguous Destitute Areas Significance, Problems, and Countermeasures: The Case of the Wuling Mountain Area

ERIC Educational Resources Information Center

Wang, Jie; Xu, Fenghua

2014-01-01

Using the Wuling Mountain area as a case study, the authors discuss the significance as well as five problems of developing information technology for vocational education in contiguous destitute areas. Recommendations are provided at the end of the article. [Translated by Michelle LeSourd.

Investigating the Lecturers' Challenges to Embrace Collaborative Web Technologies in Higher Education Institutions

ERIC Educational Resources Information Center

Pima, John; Mtui, Jaqueline

2017-01-01

The paper investigated the challenges facing Lecturers in embracing Collaborative Web Technologies (CWTs) in Higher Education Institutions (HEIs) in Tanzania. The study was motivated by the fact that while students have become natives of the CWTs, for the Lecturers, the case if different. A case study was designed to answer two research questions…

Estimating time-varying exposure-outcome associations using case-control data: logistic and case-cohort analyses.

PubMed

Keogh, Ruth H; Mangtani, Punam; Rodrigues, Laura; Nguipdop Djomo, Patrick

2016-01-05

Traditional analyses of standard case-control studies using logistic regression do not allow estimation of time-varying associations between exposures and the outcome. We present two approaches which allow this. The motivation is a study of vaccine efficacy as a function of time since vaccination. Our first approach is to estimate time-varying exposure-outcome associations by fitting a series of logistic regressions within successive time periods, reusing controls across periods. Our second approach treats the case-control sample as a case-cohort study, with the controls forming the subcohort. In the case-cohort analysis, controls contribute information at all times they are at risk. Extensions allow left truncation, frequency matching and, using the case-cohort analysis, time-varying exposures. Simulations are used to investigate the methods. The simulation results show that both methods give correct estimates of time-varying effects of exposures using standard case-control data. Using the logistic approach there are efficiency gains by reusing controls over time and care should be taken over the definition of controls within time periods. However, using the case-cohort analysis there is no ambiguity over the definition of controls. The performance of the two analyses is very similar when controls are used most efficiently under the logistic approach. Using our methods, case-control studies can be used to estimate time-varying exposure-outcome associations where they may not previously have been considered. The case-cohort analysis has several advantages, including that it allows estimation of time-varying associations as a continuous function of time, while the logistic regression approach is restricted to assuming a step function form for the time-varying association.

Risk disparities in the globalisation of assisted reproductive technology: the case of Asia.

PubMed

Ha, Jung-Ok

2013-01-01

This paper analyses the disparities in risks associated with biomedical technology focusing on the results of assisted reproductive technology (ART). ART among biomedical technologies transferred to Asia is a representative case that reveals in its clinical use and related scientific research the global politics of technology. This study notes the global politics at work in the recognition of and reaction to such risks. While many Asian countries aggressively pursue technological development, weak legislative and administrative regulations have created various problems and controversial cases. This study asserts that risks associated with technology are characterised as social facts not natural ones or mere 'side effects', since technological development and risk are closely intertwined.

Higher sweat chloride levels in patients with asthma: a case-control study.

PubMed

Awasthi, Shally; Dixit, Pratibha; Maurya, Nutan

2015-02-01

To screen asthmatic patients by sweat chloride test to identify proportion with Cystic Fibrosis (CF); (Sweat chloride level >60 mmol/L). Also, to compare sweat chloride levels between cases of bronchial asthma and age and sex matched healthy children aged 5 mo-15 y. The present case-control study was conducted in a tertiary care hospital in India. Cases of bronchial asthma, diagnosed by GINA guideline 2008, and age matched healthy controls were included. Case to control ratio was 2:1. Sweat Chloride test was done by Pilocarpine Iontophoresis method. From April 2010 through May 2012, 216 asthmatics and 112 controls were recruited. Among asthmatics, there was no case of Cystic Fibrosis. Mean sweat chloride levels in asthmatics was 22.39 ± 8.45 mmol/L (inter-quartile range - 15-28 mmol/L) and in controls 19.55 ± 7.04 mmol/L (inter-quartile range - 15-23.5 mmol/L) (p value = 0.048). No Cystic Fibrosis case was identified among asthmatics. Mean sweat chloride levels were higher in asthmatics as compared to controls.

What's that, you say? Employee expectations of privacy when using employer-provided technology--and how employers can defeat them.

PubMed

Herrin, Barry S

2012-01-01

Two 2010 court cases that determined the effectiveness of policies governing employees' use of employer-provided communication devices can be used to guide employers when constructing their own technology policies. In light of a policy that stated that "users should have no expectation of privacy or confidentiality," one case established that the employer was in the right. However, a separate case favored the employee due, in part, to an "unclear and ambiguous" policy. Ultimately, employers can restrict the use of employer-furnished technology by employees by: 1) clearly outlining that employees do not have a reasonable expectation of privacy in their use of company devices; 2) stating that any use of personal e-mail accounts using employer-provided technology will be subject to the policy; 3) detailing all technology used to monitor employees; 4) identifying company devices covered; 5) not exposing the content of employee communications; and 6) having employees sign and acknowledge the policy.

Comparative Assessment of Gasification Based Coal Power Plants with Various CO2 Capture Technologies Producing Electricity and Hydrogen

PubMed Central

2014-01-01

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H2), with and without carbon dioxide (CO2) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool “Aspen Plus”. The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO2 emission. The effect of air separation unit (ASU) and gas turbine (GT) integration on the power output of all the CO2 capture cases is assessed. Sensitivity analysis was carried out for the CLC process (electricity-only case) to examine the effect of temperature and water-cooling of the air reactor on the overall efficiency of the process. The results show that, when only electricity production in considered, the case using CLC technology has an electrical efficiency 1.3% and 2.3% higher than the PSA and Selexol based cases, respectively. The CLC based process achieves an overall CO2 capture efficiency of 99.9% in contrast to 89.9% for PSA and 93.5% for Selexol based processes. The overall efficiency of the CLC case for combined electricity and H2 production is marginally higher (by 0.3%) than Selexol and lower (by 0.6%) than PSA cases. The integration between the ASU and GT units benefits all three technologies in terms of electrical efficiency. Furthermore, our results suggest that it is favorable to operate the air reactor of the CLC process at higher temperatures with excess air supply in order to achieve higher power efficiency. PMID:24578590

Comparative Assessment of Gasification Based Coal Power Plants with Various CO2 Capture Technologies Producing Electricity and Hydrogen.

PubMed

Mukherjee, Sanjay; Kumar, Prashant; Hosseini, Ali; Yang, Aidong; Fennell, Paul

2014-02-20

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H 2 ), with and without carbon dioxide (CO 2 ) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool "Aspen Plus". The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO 2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO 2 emission. The effect of air separation unit (ASU) and gas turbine (GT) integration on the power output of all the CO 2 capture cases is assessed. Sensitivity analysis was carried out for the CLC process (electricity-only case) to examine the effect of temperature and water-cooling of the air reactor on the overall efficiency of the process. The results show that, when only electricity production in considered, the case using CLC technology has an electrical efficiency 1.3% and 2.3% higher than the PSA and Selexol based cases, respectively. The CLC based process achieves an overall CO 2 capture efficiency of 99.9% in contrast to 89.9% for PSA and 93.5% for Selexol based processes. The overall efficiency of the CLC case for combined electricity and H 2 production is marginally higher (by 0.3%) than Selexol and lower (by 0.6%) than PSA cases. The integration between the ASU and GT units benefits all three technologies in terms of electrical efficiency. Furthermore, our results suggest that it is favorable to operate the air reactor of the CLC process at higher temperatures with excess air supply in order to achieve higher power efficiency.

Alternative Fuels Data Center: Biodiesel Fueling Infrastructure Development

Science.gov Websites

Biodiesel Fueling Station Locations by State More Biodiesel Data | All Maps & Data Case Studies Recycled Fuels Help Ensure America's National Parks Stay Green for Another Century More Biodiesel Case Studies | All Case Studies Publications 2016 Vehicle Technologies Market Report Biodiesel Handling and Use Guide

Egypt`s first remotely controlled subsea completion -- A Gulf of Suez case history

DOE Office of Scientific and Technical Information (OSTI.GOV)

El Hawary, A.; Hoffman, J.G.

1995-11-01

A case history of the Gulf of Suez Petroleum Company`s (GUPCO) first remotely controlled subsea completion is provided. The first completion was for well GS 373-2, a previously drilled and tested exploration well located in the south portion of the Gulf of Suez. Subsea technology was utilized to economically justify development of this one well marginal field which was discovered in 1978. Traditional methods proved to be too costly for development, therefore application of a low cost subsea tree was utilized to capture the resources. In the Gulf of Suez many fields have been discovered by have not been developedmore » due to low reserves. These marginal projects can have a profound impact on the revenue and shareholder value if any economic method is used to exploit these opportunities. Platform installation was not feasible due to reserve size, hence the well has remained abandoned until recently. Capturing the experience of Amoco in the Gulf of Mexico and in the Dutch North Sea, GUPCO was able to build a low cost subsea system which would allow for the economic development of the marginal fields discovered in the past. This paper presents a summarized look at subsea completion technology. The cost comparison of traditional development methods will be made, given the local cost structure in Egypt. The application of this technology has some limitations and constraints which will be discussed in the paper. Furthermore the actual field installation of Egypt`s first remotely controlled subsea tree will be summarized. Also included is a discussion on simple remote controls,and offshore installation operations.« less

40 CFR 432.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2012 CFR

2012-07-01

... units (CFU) per 100 mL at any time. 3 No maximum monthly average limitation. 4 May be measured as hexane... following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2013 CFR

2013-07-01

... units (CFU) per 100 mL at any time. 3 No maximum monthly average limitation. 4 May be measured as hexane... following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2014 CFR

2014-07-01

... units (CFU) per 100 mL at any time. 3 No maximum monthly average limitation. 4 May be measured as hexane... following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... units (CFU) per 100 mL at any time. 3 No maximum monthly average limitation. 4 May be measured as hexane... following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

40 CFR 432.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... units (CFU) per 100 mL at any time. 3 No maximum monthly average limitation. 4 May be measured as hexane... following effluent limitation for ammonia (as N): Effluent Limitations [BPT] Regulatedparameter Maximum daily 1 Maximum monthly avg. 1 Ammonia (as N) 8.0 4.0 1 mg/L (ppm). (2) In the case of process...

[Electronic poison information management system].

PubMed

Kabata, Piotr; Waldman, Wojciech; Kaletha, Krystian; Sein Anand, Jacek

2013-01-01

We describe deployment of electronic toxicological information database in poison control center of Pomeranian Center of Toxicology. System was based on Google Apps technology, by Google Inc., using electronic, web-based forms and data tables. During first 6 months from system deployment, we used it to archive 1471 poisoning cases, prepare monthly poisoning reports and facilitate statistical analysis of data. Electronic database usage made Poison Center work much easier.

New method for detection of gastric cancer by hyperspectral imaging: a pilot study

NASA Astrophysics Data System (ADS)

Kiyotoki, Shu; Nishikawa, Jun; Okamoto, Takeshi; Hamabe, Kouichi; Saito, Mari; Goto, Atsushi; Fujita, Yusuke; Hamamoto, Yoshihiko; Takeuchi, Yusuke; Satori, Shin; Sakaida, Isao

2013-02-01

We developed a new, easy, and objective method to detect gastric cancer using hyperspectral imaging (HSI) technology combining spectroscopy and imaging A total of 16 gastroduodenal tumors removed by endoscopic resection or surgery from 14 patients at Yamaguchi University Hospital, Japan, were recorded using a hyperspectral camera (HSC) equipped with HSI technology Corrected spectral reflectance was obtained from 10 samples of normal mucosa and 10 samples of tumors for each case The 16 cases were divided into eight training cases (160 training samples) and eight test cases (160 test samples) We established a diagnostic algorithm with training samples and evaluated it with test samples Diagnostic capability of the algorithm for each tumor was validated, and enhancement of tumors by image processing using the HSC was evaluated The diagnostic algorithm used the 726-nm wavelength, with a cutoff point established from training samples The sensitivity, specificity, and accuracy rates of the algorithm's diagnostic capability in the test samples were 78.8% (63/80), 92.5% (74/80), and 85.6% (137/160), respectively Tumors in HSC images of 13 (81.3%) cases were well enhanced by image processing Differences in spectral reflectance between tumors and normal mucosa suggested that tumors can be clearly distinguished from background mucosa with HSI technology.

Using information communication technology in models of integrated community-based primary health care: learning from the iCOACH case studies.

PubMed

Steele Gray, Carolyn; Barnsley, Jan; Gagnon, Dominique; Belzile, Louise; Kenealy, Tim; Shaw, James; Sheridan, Nicolette; Wankah Nji, Paul; Wodchis, Walter P

2018-06-26

Information communication technology (ICT) is a critical enabler of integrated models of community-based primary health care; however, little is known about how existing technologies have been used to support new models of integrated care. To address this gap, we draw on data from an international study of integrated models, exploring how ICT is used to support activities of integrated care and the organizational and environmental barriers and enablers to its adoption. We take an embedded comparative multiple-case study approach using data from a study of implementation of nine models of integrated community-based primary health care, the Implementing Integrated Care for Older Adults with Complex Health Needs (iCOACH) study. Six cases from Canada, three each in Ontario and Quebec, and three in New Zealand, were studied. As part of the case studies, interviews were conducted with managers and front-line health care providers from February 2015 to March 2017. A qualitative descriptive approach was used to code data from 137 interviews and generate word tables to guide analysis. Despite different models and contexts, we found strikingly similar accounts of the types of activities supported through ICT systems in each of the cases. ICT systems were used most frequently to support activities like care coordination by inter-professional teams through information sharing. However, providers were limited in their ability to efficiently share patient data due to data access issues across organizational and professional boundaries and due to system functionality limitations, such as a lack of interoperability. Even in innovative models of care, managers and providers in our cases mainly use technology to enable traditional ways of working. Technology limitations prevent more innovative uses of technology that could support disruption necessary to improve care delivery. We argue the barriers to more innovative use of technology are linked to three factors: (1) information access barriers, (2) limited functionality of available technology, and (3) organizational and provider inertia.

SCALS: a fourth-generation study of assisted living technologies in their organisational, social, political and policy context

PubMed Central

Greenhalgh, Trisha; Shaw, Sara; Wherton, Joe; Hughes, Gemma; Lynch, Jenni; A'Court, Christine; Hinder, Sue; Fahy, Nick; Byrne, Emma; Finlayson, Alexander; Sorell, Tom; Procter, Rob; Stones, Rob

2016-01-01

Introduction Research to date into assisted living technologies broadly consists of 3 generations: technical design, experimental trials and qualitative studies of the patient experience. We describe a fourth-generation paradigm: studies of assisted living technologies in their organisational, social, political and policy context. Fourth-generation studies are necessarily organic and emergent; they view technology as part of a dynamic, networked and potentially unstable system. They use co-design methods to generate and stabilise local solutions, taking account of context. Methods and analysis SCALS (Studies in Co-creating Assisted Living Solutions) consists (currently) of 5 organisational case studies, each an English health or social care organisation striving to introduce technology-supported services to support independent living in people with health and/or social care needs. Treating these cases as complex systems, we seek to explore interdependencies, emergence and conflict. We employ a co-design approach informed by the principles of action research to help participating organisations establish, refine and evaluate their service. To that end, we are conducting in-depth ethnographic studies of people's experience of assisted living technologies (micro level), embedded in evolving organisational case studies that use interviews, ethnography and document analysis (meso level), and exploring the wider national and international context for assisted living technologies and policy (macro level). Data will be analysed using a sociotechnical framework developed from structuration theory. Ethics and dissemination Research ethics approval for the first 4 case studies has been granted. An important outcome will be lessons learned from individual co-design case studies. We will document the studies’ credibility and rigour, and assess the transferability of findings to other settings while also recognising unique aspects of the contexts in which they were generated. Academic outputs will include a cross-case analysis and progress in theory and method of fourth-generation assisted living technology research. We will produce practical guidance for organisations, policymakers, designers and service users. PMID:26880671

Lung cancer among newspaper printers exposed to ink mist: a study of trade union members in Manchester, England.

PubMed Central

Leon, D A; Thomas, P; Hutchings, S

1994-01-01

A nested case-control study of lung cancer among men exposed to ink mist in newspaper production with rotary letterpress technology is presented. It is based within a historical cohort of 9232 printing workers in Manchester (1949-63). Men who operated newspaper rotary letterpress machines had a lung cancer standardised mortality ratio (SMR) of 179 (95% confidence interval (95% CI) 144-218) when compared with rates for England and Wales for the follow up period 1950-83. When adjustment was made for the higher rates in the local area, the SMR was reduced to 122 (95% CI 98-148). The nested case control study was based on 110 lung cancer cases (1949-86) and 316 matched controls. Duration of work in a rotary letterpress machine room was positively associated with risk of lung cancer (chi 2 linear trend = 3.30, p = 0.07); mean with 30 or more years duration of exposure had a risk of 1.73 (95% CI 0.94-3.17), relative to those with less than 20 years of exposure. Adjustment for period of first exposure in a machine room reduced the strength of the positive duration effect. The magnitude of the SMRs found in the cohort study could be explained by confounding with smoking. The duration effect seen in the case-control study, however, suggests that there may be a real effect of exposure to letterpress ink mists. This is biologically plausible, as benzo[a]pyrene, a known human carcinogen, has been found in appreciable concentrations in the atmosphere of rotary letterpress machine rooms. PMID:8111469

SCALS: a fourth-generation study of assisted living technologies in their organisational, social, political and policy context.

PubMed

Greenhalgh, Trisha; Shaw, Sara; Wherton, Joe; Hughes, Gemma; Lynch, Jenni; A'Court, Christine; Hinder, Sue; Fahy, Nick; Byrne, Emma; Finlayson, Alexander; Sorell, Tom; Procter, Rob; Stones, Rob

2016-02-15

Research to date into assisted living technologies broadly consists of 3 generations: technical design, experimental trials and qualitative studies of the patient experience. We describe a fourth-generation paradigm: studies of assisted living technologies in their organisational, social, political and policy context. Fourth-generation studies are necessarily organic and emergent; they view technology as part of a dynamic, networked and potentially unstable system. They use co-design methods to generate and stabilise local solutions, taking account of context. SCALS (Studies in Co-creating Assisted Living Solutions) consists (currently) of 5 organisational case studies, each an English health or social care organisation striving to introduce technology-supported services to support independent living in people with health and/or social care needs. Treating these cases as complex systems, we seek to explore interdependencies, emergence and conflict. We employ a co-design approach informed by the principles of action research to help participating organisations establish, refine and evaluate their service. To that end, we are conducting in-depth ethnographic studies of people's experience of assisted living technologies (micro level), embedded in evolving organisational case studies that use interviews, ethnography and document analysis (meso level), and exploring the wider national and international context for assisted living technologies and policy (macro level). Data will be analysed using a sociotechnical framework developed from structuration theory. Research ethics approval for the first 4 case studies has been granted. An important outcome will be lessons learned from individual co-design case studies. We will document the studies' credibility and rigour, and assess the transferability of findings to other settings while also recognising unique aspects of the contexts in which they were generated. Academic outputs will include a cross-case analysis and progress in theory and method of fourth-generation assisted living technology research. We will produce practical guidance for organisations, policymakers, designers and service users. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Space benefits: The secondary application of aerospace technology in other sectors of the economy

NASA Technical Reports Server (NTRS)

1980-01-01

Over 580 examples of the beneficial use of NASA aerospace technology by public and private organizations are described to demonstrate the effects of mission-oriented programs on technological progress in the United States. General observations regarding technology transfer activity are presented. Benefit cases are listed in 20 categories along with pertinent information such as communication link with NASA; the DRI transfer example file number and individual case numbers associated with the technology and examples used; and the date of the latest contract with user organizations. Subject, organization, geographic, and field center indexes are included.

Space Benefits: The secondary application of aerospace technology in other sectors of the economy

NASA Technical Reports Server (NTRS)

1981-01-01

Some 585 examples of the beneficial use of NASA aerospace technology by public and private organizations are described to demonstrate the effects of mission-oriented programs on technological progress in the United States. General observations regarding technology transfer activity are presented. Benefit cases are listed in 20 categories along with pertinent information such as communication link with NASA; the DRI transfer example file number; and individual case numbers associated with the technology and examples used; and the date of the latest contract with user organizations. Subject, organization, geographic, and field center indexes are included.

Technology adoption and implementation in organisations: comparative case studies of 12 English NHS Trusts

PubMed Central

Ahmad, Raheelah; Holmes, Alison

2012-01-01

Objectives To understand organisational technology adoption (initiation, adoption decision, implementation) by looking at the different types of innovation knowledge used during this process. Design Qualitative, multisite, comparative case study design. Setting One primary care and 11 acute care organisations (trusts) across all health regions in England in the context of infection prevention and control. Participants and data analysis 121 semistructured individual and group interviews with 109 informants, involving clinical and non-clinical staff from all organisational levels and various professional groups. Documentary evidence and field notes were also used. 38 technology adoption processes were analysed using an integrated approach combining inductive and deductive reasoning. Main findings Those involved in the process variably accessed three types of innovation knowledge: ‘awareness’ (information that an innovation exists), ‘principles’ (information about an innovation's functioning principles) and ‘how-to’ (information required to use an innovation properly at individual and organisational levels). Centralised (national, government-led) and local sources were used to obtain this knowledge. Localised professional networks were preferred sources for all three types of knowledge. Professional backgrounds influenced an asymmetric attention to different types of innovation knowledge. When less attention was given to ‘how-to’ compared with ‘principles’ knowledge at the early stages of the process, this contributed to 12 cases of incomplete implementation or discontinuance after initial adoption. Conclusions Potential adopters and change agents often overlooked or undervalued ‘how-to’ knowledge. Balancing ‘principles’ and ‘how-to’ knowledge early in the innovation process enhanced successful technology adoption and implementation by considering efficacy as well as strategic, structural and cultural fit with the organisation's context. This learning is critical given the policy emphasis for health organisations to be innovation-ready. PMID:22492183

INDUSTRIE 4.0 - Automation in weft knitting technology

NASA Astrophysics Data System (ADS)

Simonis, K.; Gloy, Y.-S.; Gries, T.

2016-07-01

Industry 4.0 applies to the knitting industry. Regarding the knitting process retrofitting activities are executed mostly manually by an operator on the basis on the operator's experience. In doing so, the knitted fabric is not necessarily produced in the most efficient way regarding process speed and fabric quality aspects. The knitting division at ITA is concentrating on project activities regarding automation and Industry 4.0. ITA is working on analysing the correspondences of the knitting process parameters and their influence on the fabric quality. By using e.g. the augmented reality technology, the operator will be supported when setting up the knitting machine in case of product or pattern change - or in case of an intervention when production errors occur. Furthermore, the RFID-Technology offers great possibilities to ensure information flow between sub-processes of the fragmented textile process chain. ITA is using RFID-chips to save yarn production information and connect the information to the fabric producing machine control. In addition, ITA is currently working on integrating image processing systems into the large circular knitting machine in order to ensure online-quality measurement of the knitted fabrics. This will lead to a self-optimizing and selflearning knitting machine.

The Use of Virtual Reality to Facilitate Mindfulness Skills Training in Dialectical Behavioral Therapy for Borderline Personality Disorder: A Case Study

PubMed Central

Nararro-Haro, Maria V.; Hoffman, Hunter G.; Garcia-Palacios, Azucena; Sampaio, Mariana; Alhalabi, Wadee; Hall, Karyn; Linehan, Marsha

2016-01-01

Borderline personality disorder (BPD) is a severe mental disorder characterized by a dysfunctional pattern of affective instability, impulsivity, and disturbed interpersonal relationships. Dialectical Behavior Therapy (DBT®) is the most effective treatment for Borderline Personality Disorder, but demand for DBT® far exceeds existing clinical resources. Most patients with BPD never receive DBT®. Incorporating computer technology into the DBT® could help increase dissemination. Immersive Virtual Reality technology (VR) is becoming widely available to mainstream consumers. This case study explored the feasibility/clinical potential of using immersive virtual reality technology to enhance DBT® mindfulness skills training of a 32 year old female diagnosed with BPD. Prior to using VR, the patient experienced difficulty practicing DBT® mindfulness due to her emotional reactivity, and difficulty concentrating. To help the patient focus her attention, and to facilitate DBT® mindfulness skills learning, the patient looked into virtual reality goggles, and had the illusion of slowly “floating down” a 3D computer-generated river while listening to DBT® mindfulness training audios. Urges to commit suicide, urges to self harm, urges to quit therapy, urges to use substances, and negative emotions were all reduced after each VR mindfulness session and VR mindfulness was well accepted/liked by the patient. Although case studies are scientifically inconclusive by nature, results from this feasibility study were encouraging. Future controlled studies are needed to quantify whether VR-enhanced mindfulness training has long term benefits e.g., increasing patient acceptance and/or improving therapeutic outcome. Computerizing some of the DBT® skills treatment modules would reduce cost and increase dissemination. PMID:27853437

The Use of Virtual Reality to Facilitate Mindfulness Skills Training in Dialectical Behavioral Therapy for Borderline Personality Disorder: A Case Study.

PubMed

Nararro-Haro, Maria V; Hoffman, Hunter G; Garcia-Palacios, Azucena; Sampaio, Mariana; Alhalabi, Wadee; Hall, Karyn; Linehan, Marsha

2016-01-01

Borderline personality disorder (BPD) is a severe mental disorder characterized by a dysfunctional pattern of affective instability, impulsivity, and disturbed interpersonal relationships. Dialectical Behavior Therapy (DBT®) is the most effective treatment for Borderline Personality Disorder, but demand for DBT® far exceeds existing clinical resources. Most patients with BPD never receive DBT®. Incorporating computer technology into the DBT® could help increase dissemination. Immersive Virtual Reality technology (VR) is becoming widely available to mainstream consumers. This case study explored the feasibility/clinical potential of using immersive virtual reality technology to enhance DBT® mindfulness skills training of a 32 year old female diagnosed with BPD. Prior to using VR, the patient experienced difficulty practicing DBT® mindfulness due to her emotional reactivity, and difficulty concentrating. To help the patient focus her attention, and to facilitate DBT® mindfulness skills learning, the patient looked into virtual reality goggles, and had the illusion of slowly "floating down" a 3D computer-generated river while listening to DBT® mindfulness training audios. Urges to commit suicide, urges to self harm, urges to quit therapy, urges to use substances, and negative emotions were all reduced after each VR mindfulness session and VR mindfulness was well accepted/liked by the patient. Although case studies are scientifically inconclusive by nature, results from this feasibility study were encouraging. Future controlled studies are needed to quantify whether VR-enhanced mindfulness training has long term benefits e.g., increasing patient acceptance and/or improving therapeutic outcome. Computerizing some of the DBT® skills treatment modules would reduce cost and increase dissemination.

Space Weather Effects on Mid-Latitude Railways: a Statistical Study of Anomalies observed in the Operation of Signaling and Train Control Equipment on the East-Siberian Railway

NASA Astrophysics Data System (ADS)

Kasinskii, V. V.; Ptitsyna, N. G.; Lyahov, N. N.; Dorman, L. I.; Villoresi, G.; Iucci, N.

The end result of a long chain of space weather events beginning on the Sun is the induction of currents in ground-based long conductors as power lines pipelines and railways Intense geomagnetically induced currents GIC can hamper rail traffic by disturbing signaling and train control systems In few cases induced voltages were believed to have affected signaling equipment in Sweden Jansen et al 2000 and in the North of Russia Belov et al 2005 GIC threats have been a concern for technological systems at high-latitude locations due to disturbances driven by electrojet intensifications However other geomagnetic storm processes such as SSC and ring current enhancement can also cause GIC concerns for the technological systems Objective of this report is to continue our research Ptitsyna et al 2005 on possible influence of geomagnetic storms on mid-latitude railways and to perform a statistical research in addition to case studies This will help in providing a basis for railway companies to evaluate the risk of disruption to signaling and train control equipment and devise engineering solutions In the present report we analyzed anomalies in operation of automatic signaling and train control equipment occurred in 2004-2005 on the East-Siberian Railway located at mid-latitudes latitudes 51N-56N longitudes 96E-114E The anomalies consist mainly in unstable functioning and false operations in traffic automatic control systems rail chain switches locomotive control devices etc often resulting in false engagement of railway

Numerical Modelling of Rayleigh Wave Propagation in Course of Rapid Impulse Compaction

NASA Astrophysics Data System (ADS)

Herbut, Aneta; Rybak, Jarosław

2017-10-01

As the soil improvement technologies are the area of a rapid development, they require designing and implementing novel methods of control and calibration in order to ensure the safety of geotechnical works. At Wroclaw University of Science and Technology (Poland), these new methods are continually developed with the aim to provide the appropriate tools for the preliminary design of work process, as well as for the further ongoing on-site control of geotechnical works (steel sheet piling, pile driving or soil improvement technologies). The studies include preliminary numerical simulations and field tests concerning measurements and continuous histogram recording of shocks and vibrations and its ground-born dynamic impact on engineering structures. The impact of vibrations on reinforced concrete and masonry structures in the close proximity of the construction site may be destroying in both architectural and structural meaning. Those limits are juxtaposed in codes of practice, but always need an individual judgment. The results and observations make it possible to delineate specific modifications to the parameters of technology applied (e.g. hammer drop height). On the basis of numerous case studies of practical applications, already summarized and published, we were able to formulate the guidelines for work on the aforementioned sites. This work presents specific aspects of the active design (calibration of building site numerical model) by means of technology calibration, using the investigation of the impact of vibrations that occur during the Impulse Compaction on adjacent structures. A case study entails the impact of construction works on Rayleigh wave propagation in the zone of 100 m (radius) around the Compactor.

The socio-legal acceptance of new technologies: a close look at artificial insemination.

PubMed

Bernstein, Gaia

2002-10-01

Heated debates often surround the introduction of an important new technology into society, as exemplified by current controversies surrounding human cloning and privacy protection on the Internet. Underlying these controversies are disruptions to central socio-legal values caused by these new technologies. Whether new technologies will eventually be accepted by society is often contingent on the reaction of the legal system. This mandates the formulation of a conceptual framework for understanding and structuring the way the law should react in cases surrounding the adoption of new technologies. By using the case study of artificial insemination this Article develops the tools for structuring the legal role in the acceptance process of new technologies. The three-century controversy surrounding the innovation of artificial insemination results from the innovations' disruption of the socio-legal value of the family. Artificial Insemination--although invented in the eighteenth-century--was rarely used until the 1930s, and only legalized in the 1960s. Its application to surrogacy and its use by unmarried women extends the controversy into the twenty-first century. The case study demonstrates the nature of the relationship among the technological, social and legal acceptance processes of new technologies, and analyzes the legal acceptance debate. The conceptual framework produced is useful in understanding and structuring the legal role in current debates surrounding the introduction and acceptance of new technologies.

Human exploration mission studies

NASA Technical Reports Server (NTRS)

Cataldo, Robert L.

1989-01-01

The Office of Exploration has established a process whereby all NASA field centers and other NASA Headquarters offices participate in the formulation and analysis of a wide range of mission strategies. These strategies were manifested into specific scenarios or candidate case studies. The case studies provided a systematic approach into analyzing each mission element. First, each case study must address several major themes and rationale including: national pride and international prestige, advancement of scientific knowledge, a catalyst for technology, economic benefits, space enterprise, international cooperation, and education and excellence. Second, the set of candidate case studies are formulated to encompass the technology requirement limits in the life sciences, launch capabilities, space transfer, automation, and robotics in space operations, power, and propulsion. The first set of reference case studies identify three major strategies: human expeditions, science outposts, and evolutionary expansion. During the past year, four case studies were examined to explore these strategies. The expeditionary missions include the Human Expedition to Phobos and Human Expedition to Mars case studies. The Lunar Observatory and Lunar Outpost to Early Mars Evolution case studies examined the later two strategies. This set of case studies established the framework to perform detailed mission analysis and system engineering to define a host of concepts and requirements for various space systems and advanced technologies. The details of each mission are described and, specifically, the results affecting the advanced technologies required to accomplish each mission scenario are presented.

The case-control design in veterinary sciences: A survey.

PubMed

Cullen, Jonah N; Sargeant, Jan M; Makielski, Kelly M; O'Connor, Annette M

2016-11-01

The case-control study design is deceptively simple. However, many design considerations influence the estimated effect measure. An investigation of case-control studies in the human health literature suggested that some of these considerations are not described in reports of case-control studies. Our hypothesis was that the majority of veterinary studies labeled as case-controls would be incident density designs, and many would not interpret the effect measure obtained from those studies as the rate ratio rather than the odds ratio. Reference databases were searched for author-designated case-control studies. A survey of 100 randomly selected studies was conducted to examine the different design options described and estimated effect measures. Of the 100 author-identified case-control studies, 83 assessed an exposure-outcome association and, of those, only 54 (65.1%) sampled the study population based on an outcome and would thus be considered case-control designs. Twelve studies were incidence density designs but none used this terminology. Of the studies that reported an odds ratio as the effect measure, none reported on additional considerations that would have enabled a more interpretable result. This survey indicated many case-control-labeled studies were not case-control designs and among case-control studies, key design aspects were not often described. The absence of information about study design elements and underlying assumptions in case-control studies limits the ability to establish the effect measured by the study and the evidentiary value of the study might be underestimated. Copyright © 2016 Elsevier B.V. All rights reserved.

The social control of energy: A case for the promise of decentralized solar technologies

NASA Astrophysics Data System (ADS)

Gilmer, R. W.

1980-05-01

Decentralized solar technology and centralized electric utilities were contrasted in the ways they assign property rights in capital and energy output; in the assignment of operational control; and in the means of monitoring, policing, and enforcing property rights. An analogy was drawn between the decision of an energy consumer to use decentralized solar and the decision of a firm to vertically integrate, that is, to extend the boundary of a the firm to vertically integrate, that is, to extend the boundary of the firm by making inputs or further processing output. Decentralized solar energy production offers the small energy consumer the chance to cut ties to outside suppliers--to vertically integrate energy production into the home or business. The development of this analogy provides insight into important noneconomic aspects of solar energy, and it points clearly to the lighter burdens of social management offered by decentralized solar technology.

When "altering brain function" becomes "mind control".

PubMed

Koivuniemi, Andrew; Otto, Kevin

2014-01-01

Functional neurosurgery has seen a resurgence of interest in surgical treatments for psychiatric illness. Deep brain stimulation (DBS) technology is the preferred tool in the current wave of clinical experiments because it allows clinicians to directly alter the functions of targeted brain regions, in a reversible manner, with the intent of correcting diseases of the mind, such as depression, addiction, anorexia nervosa, dementia, and obsessive compulsive disorder. These promising treatments raise a critical philosophical and humanitarian question. "Under what conditions does 'altering brain function' qualify as 'mind control'?" In order to answer this question one needs a definition of mind control. To this end, we reviewed the relevant philosophical, ethical, and neurosurgical literature in order to create a set of criteria for what constitutes mind control in the context of DBS. We also outline clinical implications of these criteria. Finally, we demonstrate the relevance of the proposed criteria by focusing especially on serendipitous treatments involving DBS, i.e., cases in which an unintended therapeutic benefit occurred. These cases highlight the importance of gaining the consent of the subject for the new therapy in order to avoid committing an act of mind control.

A prolonged, community-wide cholera outbreak associated with drinking water contaminated by sewage in Kasese District, western Uganda.

PubMed

Kwesiga, Benon; Pande, Gerald; Ario, Alex Riolexus; Tumwesigye, Nazarius Mbona; Matovu, Joseph K B; Zhu, Bao-Ping

2017-07-18

In May 2015, a cholera outbreak that had lasted 3 months and infected over 100 people was reported in Kasese District, Uganda, where multiple cholera outbreaks had occurred previously. We conducted an investigation to identify the mode of transmission to guide control measures. We defined a suspected case as onset of acute watery diarrhoea from 1 February 2015 onwards in a Kasese resident. A confirmed case was a suspected case with Vibrio cholerae O1 El Tor, serotype Inaba cultured from a stool sample. We reviewed medical records to find cases. We conducted a case-control study to compare exposures among confirmed case-persons and asymptomatic controls, matched by village and age-group. We conducted environmental assessments. We tested water samples from the most affected area for total coliforms using the Most Probable Number (MPN) method. We identified 183 suspected cases including 61 confirmed cases of Vibrio cholerae 01; serotype Inaba, with onset between February and July 2015. 2 case-persons died of cholera. The outbreak occurred in 80 villages and affected all age groups; the highest attack rate occurred in the 5-14 year age group (4.1/10,000). The outbreak started in Bwera Sub-County bordering the Democratic Republic of Congo and spread eastward through sustained community transmission. The first case-persons were involved in cross-border trading. The case-control study, which involved 49 confirmed cases and 201 controls, showed that 94% (46/49) of case-persons compared with 79% (160/201) of control-persons drank water without boiling or treatment (OR M-H =4.8, 95% CI: 1.3-18). Water collected from the two main sources, i.e., public pipes (consumed by 39% of case-persons and 38% of control-persons) or streams (consumed by 29% of case-persons and 24% control-persons) had high coliform counts, a marker of faecal contamination. Environmental assessment revealed evidence of open defecation along the streams. No food items were significantly associated with illness. This prolonged, community-wide cholera outbreak was associated with drinking water contaminated by faecal matter and cross-border trading. We recommended rigorous disposal of patients' faeces, chlorination of piped water, and boiling or treatment of drinking water. The outbreak stopped 6 weeks after these recommendations were implemented.

Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-06

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

School Technology Leadership: Artifacts in Systems of Practice

ERIC Educational Resources Information Center

Dexter, Sara

2011-01-01

A cross-case analysis of five case studies of team-based technology leadership in middle schools with laptop programs identifies systems of practice that organize teams' distributed leadership. These cases suggest that successfully implementing a complex improvement effort warrants a team-based leadership approach, especially for an improvement…

PEM Electrolysis H2A Production Case Study Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Brian; Colella, Whitney; Moton, Jennie

2013-12-31

This report documents the development of four DOE Hydrogen Analysis (H2A) case studies for polymer electrolyte membrane (PEM) electrolysis. The four cases characterize PEM electrolyzer technology for two hydrogen production plant sizes (Forecourt and Central) and for two technology development time horizons (Current and Future).

Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants.

PubMed

Pradíes, Guillermo; Ferreiroa, Alberto; Özcan, Mutlu; Giménez, Beatriz; Martínez-Rus, Francisco

2014-04-01

The procedure for making impressions of multiple implants continues to be a challenge, despite the various techniques proposed to date. The authors' objective in this case report is to describe a novel digital impression method for multiple implants involving the use of stereophotogrammetric technology. The authors present three cases of patients who had multiple implants in which the impressions were obtained with this technology. Initially, a stereo camera with an infrared flash detects the position of special flag abutments screwed into the implants. This process is based on registering the x, y and z coordinates of each implant and the distances between them. This information is converted into a stereolithographic (STL) file. To add the soft-tissue information, the user must obtain another STL file by using an intraoral or extraoral scanner. In the first case presented, this information was acquired from the plaster model with an extraoral scanner; in the second case, from a Digital Imaging and Communication in Medicine (DICOM) file of the plaster model obtained with cone-beam computed tomography; and in the third case, through an intraoral digital impression with a confocal scanner. In the three cases, the frameworks manufactured from this technique showed a correct clinical passive fit. At follow-up appointments held six, 12 and 24 months after insertion of the prosthesis, no complications were reported. Stereophotogrammetric technology is a viable, accurate and easy technique for making multiple implant impressions. Clinicians can use stereophotogrammetric technology to acquire reliable digital master models as a first step in producing frameworks with a correct passive fit.

[Role of BoBs technology in early missed abortion chorionic villi].

PubMed

Li, Z Y; Liu, X Y; Peng, P; Chen, N; Ou, J; Hao, N; Zhou, J; Bian, X M

2018-05-25

Objective: To investigate the value of bacterial artificial chromosome-on-beads (BoBs) technology in the genetic analysis of early missed abortion chorionic villi. Methods: Early missed abortion chorionic villi were detected with both conventional karyotyping method and BoBs technology in Peking Union Medical Hospital from July 2014 to March 2015. Compared the results of BoBs with conventional karyotyping analysis to evaluate the sensitivity, specificity and accuracy of this new method. Results: (1) A total of 161 samples were tested successfully in the technology of BoBs, 131 samples were tested successfully in the method of conventional karyotyping. (2) All of the cases obtained from BoBs results in (2.7±0.6) days and obtained from conventional karyotyping results in (22.5±1.9) days. There was significant statistical difference between the two groups ( t= 123.315, P< 0.01) . (3) Out of 161 cases tested in BoBs, 85 (52.8%, 85/161) cases had the abnormal chromosomes, including 79 cases chromosome number abnormality, 4 cases were chromosome segment deletion, 2 cases mosaic. Out of 131 cases tested successfully in conventional karyotyping, 79 (60.3%, 79/131) cases had the abnormal chromosomes including 62 cases chromosome number abnormality, 17 cases other chromosome number abnormality, and the rate of chromosome abnormality between two methods was no significant differences ( P =0.198) . (4) Conventional karyotyping results were served as the gold standard, the accuracy of BoBs for abnormal chromosomes was 82.4% (108/131) , analysed the normal chromosomes (52 cases) and chromosome number abnormality (62 cases) tested in conventional karyotyping, the accuracy of BoBs for chromosome number abnormality was 94.7% (108/114) . Conclusion: BoBs is a rapid reliable and easily operated method to test early missed abortion chorionic villi chromosomal abnormalities.

Breakthrough discoveries in drug delivery technologies: the next 30 years.

PubMed

Brambilla, Davide; Luciani, Paola; Leroux, Jean-Christophe

2014-09-28

What if we could open the 2044 special issue of the Journal of Controlled Release? Which drug delivery technologies will have led the field? Which ones will have successfully reached the marketplace? In attempting to answer these questions, we selected a few recent technologies and concepts that could, in our opinion, play a crucial role in coming years. In each case, emblematic papers are cited to introduce and discuss the selected topic. Copyright © 2014 Elsevier B.V. All rights reserved.

Development of a Test Facility for Air Revitalization Technology Evaluation

NASA Technical Reports Server (NTRS)

Lu, Sao-Dung; Lin, Amy; Campbell, Melissa; Smith, Frederick

2006-01-01

An active fault tolerant control (FTC) law is generally sensitive to false identification since the control gain is reconfigured for fault occurrence. In the conventional FTC law design procedure, dynamic variations due to false identification are not considered. In this paper, an FTC synthesis method is developed in order to consider possible variations of closed-loop dynamics under false identification into the control design procedure. An active FTC synthesis problem is formulated into an LMI optimization problem to minimize the upper bound of the induced-L2 norm which can represent the worst-case performance degradation due to false identification. The developed synthesis method is applied for control of the longitudinal motions of FASER (Free-flying Airplane for Subscale Experimental Research). The designed FTC law of the airplane is simulated for pitch angle command tracking under a false identification case.

Effect of government actions on technological innovation for SO2 control.

PubMed

Taylor, Margaret R; Rubin, Edward S; Hounshell, David A

2003-10-15

The relationship between government actions and innovation in environmental control technology is important for the design of cost-effective policies to achieve environmental goals. This paper examines such relationships for the case of sulfur dioxide control technology for U.S. coal-fired power plants. The study employs several complementary research methods, including analyses of key government actions, technology patenting activity, technology performance and cost trends, knowledge transfer activities, and expert elicitations. Our results indicate that government regulation appears to be a greater stimulus to inventive activity than government-sponsored research support alone, and that the anticipation of regulation also spurs inventive activity. Regulatory stringency focuses this activity along particular technical pathways and is a key factor in creating markets for environmental technologies. We also find that with greater technology adoption, both new and existing systems experience notable efficiency improvements and capital cost reductions. The important role of government in fostering knowledge transfer via technical conferences and other measures is also seen as an important factor in promoting environmental technology innovation.

Crash risk factors for interstate large trucks in North Carolina.

PubMed

Teoh, Eric R; Carter, Daniel L; Smith, Sarah; McCartt, Anne T

2017-09-01

Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. A matched case-control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Quantifying the impact of selection bias caused by nonparticipation in a case-control study of mobile phone use.

PubMed

Vrijheid, Martine; Richardson, Lesley; Armstrong, Bruce K; Auvinen, Anssi; Berg, Gabriele; Carroll, Matthew; Chetrit, Angela; Deltour, Isabelle; Feychting, Maria; Giles, Graham G; Hours, Martine; Iavarone, Ivano; Lagorio, Susanna; Lönn, Stefan; McBride, Mary; Parent, Marie-Elise; Sadetzki, Siegal; Salminen, Tina; Sanchez, Marie; Schlehofer, Birgitte; Schüz, Joachim; Siemiatycki, Jack; Tynes, Tore; Woodward, Alistair; Yamaguchi, Naohito; Cardis, Elisabeth

2009-01-01

To quantitatively assess the impact of selection bias caused by nonparticipation in a multinational case-control study of mobile phone use and brain tumor. Non-response questionnaires (NRQ) were completed by a sub-set of nonparticipants. Selection bias factors were calculated based on the prevalence of mobile phone use reported by nonparticipants with NRQ data, and on scenarios of hypothetical exposure prevalence for other nonparticipants. Regular mobile phone use was reported less frequently by controls and cases who completed the NRQ (controls, 56%; cases, 50%) than by those who completed the full interview (controls, 69%; cases, 66%). This relationship was consistent across study centers, sex, and age groups. Lower education and more recent start of mobile phone use were associated with refusal to participate. Bias factors varied between 0.87 and 0.92 in the most plausible scenarios. Refusal to participate in brain tumor case-control studies seems to be related to less prevalent use of mobile phones, and this could result in a downward bias of around 10% in odds ratios for regular mobile phone use. The use of simple selection bias estimation methods in case-control studies can give important insights into the extent of any bias, even when nonparticipant information is incomplete.

Case Study of Employment Trends across 25 Years of Graduates of a Japanese Science and Technology University

ERIC Educational Resources Information Center

Nakayama, Minoru

2014-01-01

Graduates in the areas of Science and Technology are believed to have traditionally been employed in a number of specific industries, but the recent restructuring of some industries may have affected this phenomenon. In order to examine the trends concerning employment issues in more detail, a case study was conducted by surveying employment…

Using Augmented Reality in Early Art Education: A Case Study in Hong Kong Kindergarten

ERIC Educational Resources Information Center

Huang, Yujia; Li, Hui; Fong, Ricci

2016-01-01

Innovation in pedagogy by technology integration in kindergarten classroom has always been a challenge for most teachers. This design-based research aimed to explore the feasibility of using Augmented Reality (AR) technology in early art education with a focus on the gains and pains of this innovation. A case study was conducted in a typical…

Cases on Interdisciplinary Research Trends in Science, Technology, Engineering, and Mathematics: Studies on Urban Classrooms. Advances in Educational Technologies and Instructional Design

ERIC Educational Resources Information Center

Lansiquot, Reneta D.

2013-01-01

Involving two or more academic subjects, interdisciplinary studies aim to blend together broad perspectives, knowledge, skills, and epistemology in an educational setting. By focusing on topics or questions too broad for a single discipline to cover, these studies strive to draw connections between seemingly different fields. Cases on…

A Case Study of E-Tutors' Teaching Practice: Does Technology Drive Pedagogy?

ERIC Educational Resources Information Center

Chuang, Hsueh-Hua

2013-01-01

This article presents a case study of e-tutoring teaching practice during a 20-week e-tutoring program aimed at improving the English proficiency of targeted students. The study revealed what and why certain online tools were used by e-tutors and investigated how different technological proficiency and face-to-face (f2f) teaching experience shaped…

Investigation of Energy-Efficient Supermarket Display Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, D.H.

Supermarkets represent one of the largest energy-intensive building groups in the commercial sector, consuming 2 to 3 million kWh/yr per store (ES-1). Over half of this energy use is for the refrigeration of food display cases and storage coolers. Display cases are used throughout a supermarket for the merchandising of perishable food products. The cases are maintained at air temperatures ranging from -10 to 35 F, depending upon the type of product stored. The operating characteristics and energy requirements of the refrigeration system are directly related to the refrigeration load. The sources of the display case refrigeration load consist of:more » (1) Moist and warm air infiltration through the open front of the case--air curtains are employed to inhibit this infiltration, but some ambient air is entrained, which adds a substantial portion to the refrigeration load. (2) Heat conduction through case panels and walls. (3) Thermal radiation from the ambient to the product and display case interior. (4) Internal thermal loads--the use of lights, evaporator fans, periodic defrosts, and antisweat heaters adds to the refrigeration load of the display case as well as directly consuming electric energy. The impact of each of these elements on the refrigeration load is very dependent upon case type (Figure ES-1). For example, air infiltration is the most significant portion of the refrigeration load for open, multi-deck cases, while radiation is the largest part of the load for tub-type cases. The door anti-sweat heaters represent a major share of the refrigeration load for frozen food door reach-in cases. Figure ES-2 shows the distribution of display cases in a typical supermarket (ES-2). Open, multi-deck, medium temperature display cases typically comprise about half of the refrigerated fixtures in a store (ES-3). In addition, medium temperature fixtures and storage coolers account for roughly 70 to 75 percent of the total store refrigeration load with open, multi-deck cases contributing about 3/4 of that fraction. Consequently, the focus of this investigation has tilted toward the open, vertical, multi-deck medium temperature case type. Various technologies and control methods are energy efficiency measures (EEMs) that could be applied to display cases and result in the reduction of the refrigeration load and of the energy consumption of the supermarket refrigeration system. An extensive evaluation of the EEMs was conducted in order to select those that met the following criteria: (1) Near-term implementation--All EEMs considered could be implemented with existing refrigeration hardware and technology. (2) Potential for energy-efficiency improvements--Energy savings and/or refrigeration load reduction must be obtained by the implementation of the EEM. (3) Enhancement of the ability to maintain target product temperature--Proper operation of the display case and maintenance of the stored product temperature could not be compromised by the use of the EEM. The energy impact of a number of viable display case EEMs was quantified by performing whole building hourly simulations. A special version of the U.S. Department of Energy's (DOE-2.3) program was used to develop a model of a supermarket. The model was then calibrated using available end-use monitored data to increase confidence in simulation results.« less

Approaches of multilayer overlay process control for 28nm FD-SOI derivative applications

NASA Astrophysics Data System (ADS)

Duclaux, Benjamin; De Caunes, Jean; Perrier, Robin; Gatefait, Maxime; Le Gratiet, Bertrand; Chapon, Jean-Damien; Monget, Cédric

2018-03-01

Derivative technology like embedded Non-Volatile Memories (eNVM) is raising new types of challenges on the "more than Moore" path. By its construction: overlay is critical across multiple layers, by its running mode: usage of high voltage are stressing leakages and breakdown, and finally with its targeted market: Automotive, Industry automation, secure transactions… which are all requesting high device reliability (typically below 1ppm level). As a consequence, overlay specifications are tights, not only between one layer and its reference, but also among the critical layers sharing the same reference. This work describes a broad picture of the key points for multilayer overlay process control in the case of a 28nm FD-SOI technology and its derivative flows. First, the alignment trees of the different flow options have been optimized using a realistic process assumptions calculation for indirect overlay. Then, in the case of a complex alignment tree involving heterogeneous scanner toolset, criticality of tool matching between reference layer and critical layers of the flow has been highlighted. Improving the APC control loops of these multilayer dependencies has been studied with simulations of feed-forward as well as implementing new rework algorithm based on multi-measures. Finally, the management of these measurement steps raises some issues for inline support and using calculations or "virtual overlay" could help to gain some tool capability. A first step towards multilayer overlay process control has been taken.

Achieving success: assessing the role of and building a business case for technology in healthcare.

PubMed

Neumann, C L; Blouin, A S; Byrne, E M

1999-01-01

As the healthcare market continues to evolve, technology will play an increasingly important role in an integrated delivery system's ability to provide high-quality, cost-effective care. Healthcare leaders must be proactive and forward thinking about their technology investments. The financial investment for technology innovation can be significant. Therefore, it is important that healthcare executives deliberately design the role of technology and develop a consistent method for evaluating, identifying, and prioritizing technology investments. The article begins by describing technology's role in a healthcare organization as a window to the organization, a key driver of business strategy, and a high-performance enabler, and it develops a seven-step process for building a business case to ensure that an organization's technology investments are wise, well-reasoned, and will provide value to its customers. In addition, the article discusses the importance of combining people and process reengineering with new technology to exponentially increase the value to an organization. Healthcare leaders must understand the multiple roles of technology and consistently develop a business case when making technology investment decisions. Organizations driven by such an understanding will have a robust infrastructure of enabling technology designed to integrate people and process elements with technology to achieve the goals and initiatives of the organization. These organizations will lead the healthcare industry into the next millennium.

Comparison of two control groups for estimation of oral cholera vaccine effectiveness using a case-control study design.

PubMed

Franke, Molly F; Jerome, J Gregory; Matias, Wilfredo R; Ternier, Ralph; Hilaire, Isabelle J; Harris, Jason B; Ivers, Louise C

2017-10-13

Case-control studies to quantify oral cholera vaccine effectiveness (VE) often rely on neighbors without diarrhea as community controls. Test-negative controls can be easily recruited and may minimize bias due to differential health-seeking behavior and recall. We compared VE estimates derived from community and test-negative controls and conducted bias-indicator analyses to assess potential bias with community controls. From October 2012 through November 2016, patients with acute watery diarrhea were recruited from cholera treatment centers in rural Haiti. Cholera cases had a positive stool culture. Non-cholera diarrhea cases (test-negative controls and non-cholera diarrhea cases for bias-indicator analyses) had a negative culture and rapid test. Up to four community controls were matched to diarrhea cases by age group, time, and neighborhood. Primary analyses included 181 cholera cases, 157 non-cholera diarrhea cases, 716 VE community controls and 625 bias-indicator community controls. VE for self-reported vaccination with two doses was consistent across the two control groups, with statistically significant VE estimates ranging from 72 to 74%. Sensitivity analyses revealed similar, though somewhat attenuated estimates for self-reported two dose VE. Bias-indicator estimates were consistently less than one, with VE estimates ranging from 19 to 43%, some of which were statistically significant. OCV estimates from case-control analyses using community and test-negative controls were similar. While bias-indicator analyses suggested possible over-estimation of VE estimates using community controls, test-negative analyses suggested this bias, if present, was minimal. Test-negative controls can be a valid low-cost and time-efficient alternative to community controls for OCV effectiveness estimation and may be especially relevant in emergency situations. Copyright © 2017. Published by Elsevier Ltd.

Hyperactivity of the default-mode network in first-episode, drug-naive schizophrenia at rest revealed by family-based case-control and traditional case-control designs.

PubMed

Guo, Wenbin; Liu, Feng; Chen, Jindong; Wu, Renrong; Li, Lehua; Zhang, Zhikun; Chen, Huafu; Zhao, Jingping

2017-03-01

Abnormal regional activity and functional connectivity of the default-mode network (DMN) have been reported in schizophrenia. However, previous studies may have been biased by unmatched case-control design. To limit such bias, the present study used both the family-based case-control design and the traditional case-control design to investigate abnormal regional activity of the DMN in patients with schizophrenia at rest.Twenty-eight first-episode, drug-naive patients with schizophrenia, 28 age-, sex-matched unaffected siblings of the patients (family-based controls, FBC), and 40 healthy controls (HC) underwent resting-state functional magnetic resonance imaging (fMRI) scans. The group-independent component analysis and fractional amplitude of low-frequency fluctuation (fALFF) methods were used to analyze the data.Patients with schizophrenia show increased fALFF in an overlapped region of the right superior medial prefrontal cortex (MPFC) relative to the FBC and the HC. Compared with the HC, the patients and the FBC exhibit increased fALFF in an overlapped region of the left posterior cingulate cortex/precuneus (PCC/PCu). Furthermore, the z values of the 2 overlapped regions can separate the patients from the FBC/HC, and separate the patients/FBC from the HC with relatively high sensitivity and specificity.Both the family-based case-control and traditional case-control designs reveal hyperactivity of the DMN in first-episode, drug-naive patients with paranoid schizophrenia, which highlights the importance of the DMN in the neurobiology of schizophrenia. Family-based case-control design can limit the confounding effects of environmental factors in schizophrenia. Combination of the family-based case-control and traditional case-control designs may be a viable option for the neuroimaging studies.

Remote object authentication: confidence model, cryptosystem and protocol

NASA Astrophysics Data System (ADS)

Lancrenon, Jean; Gillard, Roland; Fournel, Thierry

2009-04-01

This paper follows a paper by Bringer et al.3 to adapt a security model and protocol used for remote biometric authentication to the case of remote morphometric object authentication. We use a different type of encryption technique that requires smaller key sizes and has a built-in mechanism to help control the integrity of the messages received by the server. We also describe the optical technology used to extract the morphometric templates.

Characterizing and controlling industrial dust: a case study in small particle measurement.

PubMed

Combes, Richard S; Warren, D Alan

2005-07-01

Instrumentation used to measure characteristics of fine particles entrained in gas or suspended in aerosols provides information needed to develop valid regulations for emission sources and to support the design of control technologies. This case study offers a brief history of "micromeritics," a term used by early researchers to describe the science of small particles, and the related invention of laboratory instruments for characterizing very fine particles. The historical view provides insights into the role that Progressive Era government agencies played in advancing esoteric science and applying this knowledge to the regulation of workplace air pollution. Micromeritics instrumentation developed in conjunction with federal research now has many commercial applications worldwide, with characterizing airborne pollutants only a minor one. However, the continuing advances in the micromeritics field provide important laboratory measurement capabilities to environmental research organizations, such as the National Institute for Occupational Safety and Health (NIOSH).

[APPLICATION OF DIGITAL TECHNOLOGY IN ANTEROLATERAL THIGH FLAP FOR REPAIRING WOUNDS OF HAND AND FOOT].

PubMed

Duan, Jiazhang; He, Xiaoqing; Xu, Yongqing; Fan, Xinyu; Luo, Haotian; Wang, Teng; Dong, Kaixuan; Yu, Kaifu

2015-07-01

To investigate the effectiveness of digital technology in repairing wounds of the hand and foot with anterolateral thigh flap. Between September 2013 and September 2014, 16 cases of wounds of the hand and foot were treated with the anterolateral thigh flap. There were 10 males and 6 females, with an average age of 31 years (range, 20-52 years). The causes included traffic accident injury in 8 cases, crushing injury by machine in 6 cases, burning injury in 1 case, and animal biting injury in 1 case. The locations of soft tissue defect were the dorsum of the foot in 5 cases, the ankle in 4 cases, the planta pedis in 1 case, and the hand and forearm in 6 cases. The time was 2 hours to 45 days from injury to hospitalization (mean, 14.3 days). All defects were associated with exposure of bone and tendon. The size of wound was from 9.0 cmx4.0 cm to 29.0 cmx8.5 cm. CT angiography (CTA) was performed before operation, and the appropriate perforator as well as the donor site was selected. Then the Mimics l5.0 software was used to reconstruct the data of CTA so as to locate the main perforators, design the three-dimensional models of the anterolateral thigh flap, and simulate operation. The flap was obtained according to preoperative plan during operation. The size of flaps varied from 11 cm x 5 cm to 31 cm x 10 cm. The donor sites were sutured directly in 14 cases and were repaired by free skin graft in 2 cases. The lateral femoral circumflex artery identified by Mimics l5.0 software before operation, as well as the starting position of its descending branch, the blood vessel diameter at start site, vascular distribution, the maximum cutting length of the vascular pedicle were consistent with the actual observation during operation. All flaps were harvested and were used to repair defect smoothly. Vascular crisis occurred in 1 flap after operation, and the other flaps survived successfully. The wounds and the incisions obtained healing by first intention, and grafted skin survived completely. All cases were followed up 6-17 months (mean, 9 months). Fifteen flaps had good shape; but a second- stage operation was performed to make the flap thinner in 1 case. At last follow-up, the results were excellent in 3 cases, good in 2 cases, and fair in 1 case according to total active motion (TAM) in 6 cases of hand and forearm injury; the results were excellent in 5 cases, good in 3 cases, and fair in 2 cases according to American Orthopaedic Foot and Ankle Society (AOFAS) in 10 cases of foot injury. The total excellent and good rate was 81.25%. The preoperative individualization design of the flap can be realized through CTA digital technology and Mimics 15.0 software; it can reduce the operation risk.

Hybrid modelling for ATES planning and operation in the Utrecht city centre

NASA Astrophysics Data System (ADS)

Jaxa-Rozen, Marc; Bloemendal, Martin; Kwakkel, Jan; Rostampour, Vahab

2016-04-01

Aquifer Thermal Energy Storage (ATES) systems can significantly reduce the energy use and greenhouse gas emissions of buildings in temperate climates. However, the rapid adoption of these systems has evidenced a number of emergent issues with the operation and management of urban ATES systems, which require careful spatial planning to avoid thermal interferences or conflicts with other subsurface functions. These issues have become particularly relevant in the Netherlands, which are currently the leading market for ATES (Bloemendal et al., 2015). In some urban areas of the country, the adoption of ATES technology is thus becoming limited by the available subsurface space. This scarcity is partly caused by current approaches to ATES planning; as such, static permits tend to overestimate pumping rates and yield excessive safety margins, which in turn hamper the energy savings which could be realized by new systems. These aspects are strongly influenced by time-dependent dynamics for the adoption of ATES systems by building owners and operators, and by the variation of ATES well flows under uncertain conditions for building energy demand. In order to take these dynamics into account, previous research (Jaxa-Rozen et al., 2015) introduced a hybrid simulation architecture combining an agent-based model of ATES adoption, a Matlab control design, and a MODFLOW/SEAWAT aquifer model. This architecture was first used to study an idealized case of urban ATES development. This case evidenced a trade-off between the thermal efficiency of individual systems and the collective energy savings realized by ATES systems within a given area, which had already been suggested by other research (e.g. Sommer et al., 2015). These results also indicated that current layout guidelines may be overly conservative, and limit the adoption of new systems. The present study extends this approach to a case study of ATES planning in the city centre of Utrecht, in the Netherlands. This case is particularly relevant due to a combination of dense ATES development and complex subsurface conditions. An agent-based model of ATES adoption was thus parameterized to represent historical development patterns in the area over the 1998-2015 period, as well as plausible future adoption dynamics under a range of socio-technical uncertainties. An existing geohydrological model (Deltares, 2009) was used to represent local subsurface conditions. Preliminary results from this case study indicate that the idealized dynamics obtained in the previous case can also be observed under more realistic conditions; the geographic constraints introduced by building plot layouts and other spatial features tend to further constrain the adoption of new systems, emphasizing the risk of a scarcity of space under current layout guidelines. Furthermore, order effects appear to play a more significant role for system efficiency than in the idealized case. Earlier adopters thus tend to benefit from higher thermal efficiency due to the transient development of thermal bubbles, which could make older systems more robust to thermal interactions. In order to better understand the relationships between these processes and the operation of ATES wells under uncertainty, the case study will be extended by incorporating a Model Predictive Control approach for simulated ATES operation. References Bloemendal, M., Olsthoorn, T., & van de Ven, F. (2015). Combining climatic and geo-hydrological preconditions as a method to determine world potential for aquifer thermal energy storage. Science of the Total Environment, 538, 621-633. Deltares (2009). Ontwikkeling HDSR hydrologisch modelinstrumentarium - HYDROMEDAH. Deelrapport 1: Beschrijving MODFLOW model. Delft, The Netherlands: Deltares. Jaxa-Rozen, M., Kwakkel, J., & Bloemendal, M. (2015). The adoption and diffusion of common-pool resource-dependent technologies: The case of Aquifer Thermal Energy Storage systems. In Proceedings of the 2015 Portland International Conference on Management of Engineering and Technology (PICMET) (pp. 2390-2408). Sommer, W., Valstar, J., Leusbrock, I., Grotenhuis, T., & Rijnaarts, H. (2015). Optimization and spatial pattern of large-scale aquifer thermal energy storage. Applied Energy, 137(2015), 322-337.

A Usability Study of Interactive Web-Based Modules

ERIC Educational Resources Information Center

Girard, Tulay; Pinar, Musa

2011-01-01

This research advances the understanding of the usability of marketing case study modules in the area of interactive web-based technologies through the assignment of seven interactive case modules in a Principles of Marketing course. The case modules were provided for marketing students by the publisher, McGraw Hill Irwin, of the…

Instructional Technology Applications in Vocational Education: A Notebook of Cases.

ERIC Educational Resources Information Center

Gooler, Dennis D.; Roth, Gene L.

This resource book is one of a series of three information resources containing ideas about instructional technology applications and how certain technology applications may have particular relevance to vocational education. It contains descriptions of some instructional technology systems applications that are currently in use. The cases focus…

Why University Members Use and Resist Technology? A Structure Enactment Perspective

ERIC Educational Resources Information Center

Lin, Canchu; Singer, Ross; Ha, Louisa

2010-01-01

This case study investigated university members' use of and resistance to a communication information technology system in a higher education organization. This case study utilized the technology enactment framework to examine structure enactment in university members' technology use and resistance. We found that the following structures were…

Engineering Social Justice into Traffic Control for Self-Driving Vehicles?

PubMed

Mladenovic, Milos N; McPherson, Tristram

2016-08-01

The convergence of computing, sensing, and communication technology will soon permit large-scale deployment of self-driving vehicles. This will in turn permit a radical transformation of traffic control technology. This paper makes a case for the importance of addressing questions of social justice in this transformation, and sketches a preliminary framework for doing so. We explain how new forms of traffic control technology have potential implications for several dimensions of social justice, including safety, sustainability, privacy, efficiency, and equal access. Our central focus is on efficiency and equal access as desiderata for traffic control design. We explain the limitations of conventional traffic control in meeting these desiderata, and sketch a preliminary vision for a next-generation traffic control tailored to address better the demands of social justice. One component of this vision is cooperative, hierarchically distributed self-organization among vehicles. Another component of this vision is a priority system enabling selection of priority levels by the user for each vehicle trip in the network, based on the supporting structure of non-monetary credits.

Insights on Technology Innovation - A Review of the U.S. Department of Energy Solar Decathlon Competition Entries 2002-2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, Joseph J; Doris, Elizabeth S; Farrar, Sara L

The U.S. Department of Energy (DOE) Solar Decathlon is a collegiate competition that challenges student teams to design and build full-size, solar-powered houses. Because of balanced design priorities of architecture, engineering, innovation, performance, and energy use, teams have focused on a range of technologies in the built environment, from wall materials to home control systems, from electric lighting to HVAC equipment, and from geothermal to solar photovoltaic technology. This report provides insights into building technology innovation from a review of the Solar Decathlon competition entry designs, anecdotal experiences, and related market reports. The report describes example case studies of themore » evolution of technology solutions over time to illustrate the innovative, market-driving nature of the Solar Decathlon. It charts technologies utilized in the team designs over seven competitions and compares those to broader market adoption. It is meant to illustrate the technology innovation aspects of the competition, not to be a comprehensive or quantitative analysis. Solar Decathlon also has impacts on public perception of innovative technologies as well as workforce development through the thousands of participating students. The focus of these case studies is to showcase how it contributes to marketplace adoption of innovative energy technologies.« less

Structured, Graphical Analysis of C2 Teams and their Technologies

DTIC Science & Technology

2011-01-01

Two Fratricide Cases Revisited. Paper presented at the 15th International Command and Control Reserach and Technology Symposium (ICCRTS), June 22-24...network-enabled ADF. The paper is thus organized in three sections. The first section introduces the graphics for analyzing the formation and use...summarize, Colored Petri Nets center on networks in which tokens are created, moved, copied, or destroyed (Figure 1). An ellipse denotes a space for

Energy System Basics and Distribution Integration Video Series | Energy

Science.gov Websites

renewablesparticularly solar photovoltaic (PV) technologiesonto the distribution grid. Solar Energy Technologies PV Integration Case Studies Integrating Photovoltaic Systems onto Secondary Network Distribution Systems Standards and Codes for U.S. Photovoltaic System Installation Network-Optimal Control of Photovoltaics on

Amniotic fluid inflammatory cytokines: potential markers of immunologic dysfunction in autism spectrum disorders.

PubMed

Abdallah, Morsi W; Larsen, Nanna; Grove, Jakob; Nørgaard-Pedersen, Bent; Thorsen, Poul; Mortensen, Erik L; Hougaard, David M

2013-09-01

The aim of the study was to analyze cytokine profiles in amniotic fluid (AF) samples of children developing autism spectrum disorders (ASD) and controls, adjusting for maternal autoimmune disorders and maternal infections during pregnancy. AF samples of 331 ASD cases and 698 controls were analyzed for inflammatory cytokines using Luminex xMAP technology utilizing a historic birth cohort. Clinical data were retrieved from nationwide registers, and case-control differences in AF cytokine levels were assessed using chi-square tests, logistic and tobit regression models. Overall, individuals with ASD had significantly elevated AF levels of TNF-α and TNF-β compared to controls. Analyzing individuals diagnosed only with ICD-10 codes yielded significantly elevated levels of IL-4, IL-10, TNF-α and TNF-β in ASD patients. Restricting analysis to infantile autism cases showed significantly elevated levels of IL-4, TNF-α and TNF-β compared to controls with no psychiatric comorbidities. Elevated levels of IL-6 and IL-5 were found in individuals with other childhood psychiatric disorders (OCPD) when compared to controls with no psychiatric comorbidities. AF samples of individuals with ASD or OCPD showed differential cytokine profiles compared to frequency-matched controls. Further studies to examine the specificity of the reported cytokine profiles in ASD and OCPD are required.

Adaptive chromogenic materials and devices

NASA Astrophysics Data System (ADS)

Sixou, Pierre; Guillard, H.; Labonne, L.; Gandolfo, V.

2003-03-01

Electrically controllable glasses can be used to control daylight and solar energy in buildings and in automotives in order to improve quality of life and to save energy spent on lighting, cooling and heating. The paper discusses the case of switchable glazings using liquid crystal/polymer micro-composites. A comparison with other technologies (like inorganic electrochromics, thermotropic gels and dispersed particles) is drawn.

Accounting Control Technology Using SAP: A Case-Based Approach

ERIC Educational Resources Information Center

Ragan, Joseph; Puccio, Christopher; Talisesky, Brandon

2014-01-01

The Sarbanes-Oxley Act (SOX) revolutionized the accounting and audit industry. The use of preventative and process controls to evaluate the continuous audit process done via an SAP ERP ECC 6.0 system is key to compliance with SOX and managing costs. This paper can be used in a variety of ways to discuss issues associated with auditing and testing…

Pilot Project Technology Business Case: Mobile Work Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken; Lawrie, Sean; Niedermuller, Josef

Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such thatmore » it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are “harvestable,” meaning they result in an actual reduction in headcount and/or cost. The report describes the specific activities conducted with a partner utility to examine the various work activities associated with mobile work packages to determine what time savings and error rate reductions are available. The report summarizes these findings in the form of a business case for the technology.« less

Case management information systems: how to put the pieces together now and beyond year 2000.

PubMed

Matthews, Pamela

2002-01-01

The case management process is a critical management and operational component in the delivery of customer services across the patient care continuum. Case management has transcended time and will continue to be a viable infrastructure process for successful organizations in the future. A key component of the case management infrastructure is information systems and technology support. Case management challenges include effective deployment and use of systems and technology. As more sophisticated, integrated systems are made available, case managers can use these tools to continue to expand effectively beyond the patient's episodic event to provide greater levels of cradle-to-grave management of healthcare. This article explores methods for defining case management system needs and identifying automation options available to the case manager.

Ovarian stimulation and embryo banking for fertility preservation in a woman with severe mixed connective tissue disease: Is it safe?

PubMed

Sioulas, Vasileios D; Gracia, Clarisa R

2012-03-01

To report the first case of using assisted reproductive technologies (ART) for fertility preservation in a patient with mixed connective tissue disease (MCTD), secondary pulmonary hypertension (PH) and antiphospholipid syndrome (APS). Case-report and review of the literature. Academic infertility practice and tertiary care center. A 25-year-old woman with MCTD, complicated with PH and APS, who was scheduled for gonadotoxic therapy Controlled ovarian hyperstimulation, egg retrieval, embryo banking. Successful ART cycle leading to embryo banking without worsening her underlying disease. Following successful embryo cryopreservation, the patient experienced respiratory failure and other severe complications, resulting in a prolonged hospital stay. Controlled ovarian hyperstimulation for embryo banking in women with MCTD, PH and APS may pose a risk for potentially catastrophic complications. A multidisciplinary approach to these patients is necessary to optimize the outcomes of such procedures. More data are needed regarding the safety of fertility preservation technologies in patients with complex medical diseases.

Health and Development of Children Born after Assisted Reproductive Technology and Sub-Fertility Compared to Naturally Conceived Children: Data from a National Study

PubMed Central

Sutcliffe, Alastair G.; Melhuish, Edward; Barnes, Jacqueline; Gardiner, Julian

2014-01-01

In a non-matched case-control study using data from two large national cohort studies, we investigated whether indicators of child health and development up to 7 years of age differ between children conceived using assisted reproductive technology (ART), children born after sub-fertility (more than 24 months of trying for conception) and other children. Information on ART use/sub-fertility was available for 23,649 children. There were 227 cases (children conceived through ART) and two control groups: 783 children born to sub-fertile couples, and 22,639 children born to couples with no fertility issues. In models adjusted for social and demographic factors there were significant differences between groups in rate of hospital admissions before the children were 9 months old (P=0.029), with the ART group showing higher rates of hospital admission than the no fertility issues control group, the sub-fertile control group being intermediate between the two. Children born after ART had comparable health and development beyond 9 months of age to their naturally conceived peers. This applied to the whole sample and to a sub-sample of children from deprived neighborhoods. PMID:24711911

Inter-Regional, Epidemiological Study of Childhood Cancer (IRESCC): case-control study in children with germ cell tumors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, H.E.; Mann, J.R.; Williams, J.

In 1980-1983 members of IRESCC interviewed parents of 555 children with newly diagnosed cancer on topics of possible etiological significance. Identical questions were asked of the parents of 1100 control children chosen from hospital admissions and general practitioner lists. Medical information was confirmed whenever possible by cross-checking with NHS records. Data for the 41 children with germ cell tumors and their 82 controls are reported here. The cases had more major congenital malformations than controls, including one neural tube defect. More case than control mothers and fathers reported occupational exposure to chemicals. Nine close relatives of cases had multiple primarymore » tumors, which were often benign or of low-grade malignancy, compared with 1 hospital control and 3 general practitioner control relatives. Cases and controls differed with respect to birth weight and paternal age. No case-control differences were shown for: birth rank, maternal age, chronic illnesses and smoking, mothers reproductive histories and oral contraceptive usage. In index pregnancies there were no case-control differences for maternal illness, infections, alcohol intake and X-ray and ultrasound exposure. There was no difference between cases and controls for the frequency of twinning the families.« less

Risk factors for epilepsy in Bas-Uélé Province, Democratic Republic of the Congo: a case-control study.

PubMed

Colebunders, Robert; Mandro, Michel; Mokili, John L; Mucinya, Gisele; Mambandu, Germain; Pfarr, Kenneth; Reiter-Owona, Ingrid; Hoerauf, Achim; Tepage, Floribert; Levick, Bethanie; Begon, Michael; Laudisoit, Anne

2016-08-01

The reason for the high prevalence of epilepsy in onchocerciasis endemic areas remains unknown. The aim of this study was to detect risk factors associated with epilepsy in a region endemic for onchocerciasis. In June 2014, a case-control study was performed in Titule, Bas-Uélé Province in the Democratic Republic of the Congo. Individuals with unprovoked convulsive epilepsy of unknown aetiology were enrolled as cases (n=59). Healthy members of families without cases of epilepsy in the same village were recruited as controls (n=61). A multivariate binomial logistic regression analysis was performed to identify potential risk factors associated with epilepsy. To evaluate the potential protective effect of ivermectin treatment on the development of epilepsy, a nested age-matched case-control study was performed including only those who were eligible for ivermectin treatment in the year before they developed epilepsy. Suspected onchocerciasis skin lesions were more often present in cases than in controls: 12/41 (29%) vs. 1/56 (2%), respectively (odds ratio (OR) 20.26, 95% confidence interval (CI) 2.42-170; p<0.01). Ivermectin had been taken 7 months earlier in 29/59 (49%) cases and 29/61 (48%) controls. Onchocerca volvulus (OV) DNA was detected by PCR in skin snips in 26/34 cases (76%) and 10/14 controls (71%) (p=0.7), and there was presence of OV IgG4 antibodies in 35/48 (73%) cases and 15/18 (83%) controls (p=0.5). OV DNA was not detected in the cerebrospinal fluid of cases (controls not tested). Both cases and controls reported frequent bites by blackflies (Diptera, Simuliidae). Bathing daily as opposed to less often (OR 16.7, 95% CI 2.2-125.8; p<0.01), bathing between 11 a.m. and 4 p.m. (OR 12.7, 95% CI 1.6-103.7; p=0.02), and washing clothes between 11 a.m. and 4 p.m. (OR 10.9, 95% CI 1.5-77.3; p=0.02) were all independently associated with epilepsy. Blood screening by specific PCR tests for Toxoplasma and Wuchereria bancrofti was negative in all cases and controls. A Loa loa infestation was found in only one case and one control by PCR and Giemsa smear. Antibodies to Taenia solium, Toxocara, and Trypanosoma sp were not detected in any of the participants. In an age-matched case-control analysis, 16/18 (89%) cases had not taken ivermectin the year before they developed epilepsy, compared to 7/18 (39%) controls that same year (p=0.002). These data suggest that frequent activities at rivers known to be blackfly breeding sites and a historical lack of ivermectin treatment were risk factors for epilepsy in this onchocerciasis endemic area. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Assessing different measures of population-level vaccine protection using a case-control study.

PubMed

Ali, Mohammad; You, Young Ae; Kanungo, Suman; Manna, Byomkesh; Deen, Jacqueline L; Lopez, Anna Lena; Wierzba, Thomas F; Bhattacharya, Sujit K; Sur, Dipika; Clemens, John D

2015-11-27

Case-control studies have not been examined for their utility in assessing population-level vaccine protection in individually randomized trials. We used the data of a randomized, placebo-controlled trial of a cholera vaccine to compare the results of case-control analyses with those of cohort analyses. Cases of cholera were selected from the trial population followed for three years following dosing. For each case, we selected 4 age-matched controls who had not developed cholera. For each case and control, GIS was used to calculate vaccine coverage of individuals in a surrounding "virtual" cluster. Specific selection strategies were used to evaluate the vaccine protective effects. 66,900 out of 108,389 individuals received two doses of the assigned regimen. For direct protection among subjects in low vaccine coverage clusters, we observed 78% (95% CI: 47-91%) protection in a cohort analysis and 84% (95% CI: 60-94%) in case-control analysis after adjusting for confounding factors. Using our GIS-based approach, estimated indirect protection was 52% (95% CI: 10-74%) in cohort and 76% (95% CI: 47-89%) in case control analysis. Estimates of total and overall effectiveness were similar for cohort and case-control analyses. The findings show that case-control analyses of individually randomized vaccine trials may be used to evaluate direct as well as population-level vaccine protection. Copyright © 2015. Published by Elsevier Ltd.

On the application of semantic technologies to the domain of forensic investigations in financial crimes

NASA Astrophysics Data System (ADS)

Scheidat, Tobias; Merkel, Ronny; Krummel, Volker; Gerlach, Andreas; Weisensee, Michala; Zeihe, Jana; Dittmann, Jana

2017-10-01

In daily police practice, forensic investigation of criminal cases is mainly based on manual work and the experience of individual forensic experts, using basic storage and data processing technologies. However, an individual criminal case does not only consist of the actual offence, but also of a variety of different aspects involved. For example, in order to solve a financial criminal case, an investigator has to find interrelations between different case entities as well as to other cases. The required information about these different entities is often stored in various databases and mostly requires to be manually requested and processed by forensic investigators. We propose the application of semantic technologies to the domain of forensic investigations at the example of financial crimes. Such combination allows for modelling specific case entities and their interrelations within and between cases. As a result, an explorative search of connections between case entities in the scope of an investigation as well as an automated derivation of conclusions from an established fact base is enabled. The proposed model is presented in the form of a crime field ontology, based on different types of knowledge obtained from three individual sources: open source intelligence, forensic investigators and captive interviews of detained criminals. The modelled crime field ontology is illustrated at two examples using the well known crime type of explosive attack on ATM and the potentially upcoming crime type data theft by NFC crowd skimming. Of these criminal modi operandi, anonymized fictional are modelled, visualized and exploratively searched. Modelled case entities include modi operandi, events, actors, resources, exploited weaknesses as well as flows of money, data and know how. The potential exploration of interrelations between the different case entities of such examples is illustrated in the scope of a fictitious investigation, highlighting the potential of the approach.

Alcoa North American Extrusions Implements Energy Use Assessments at Multiple Facilities: Office of Industrial Technologies (OIT) BestPractices Aluminum Assessment Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-05

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Measuring Workload Demand of Informatics Systems with the Clinical Case Demand Index

PubMed Central

Iyengar, M. Sriram; Rogith, Deevakar; Florez-Arango, Jose F

2017-01-01

Introduction: The increasing use of Health Information Technology (HIT) can add substantially to workload on clinical providers. Current methods for assessing workload do not take into account the nature of clinical cases and the use of HIT tools while solving them. Methods: The Clinical Case Demand Index (CCDI), consisting of a summary score and visual representation, was developed to meet this need. Consistency with current perceived workload measures was evaluated in a Randomized Control Trial of a mobile health system. Results: CCDI is significantly correlated with existing workload measures and inversely related to provider performance. Discussion: CCDI combines subjective and objective characteristics of clinical cases along with cognitive and clinical dimensions. Applications include evaluation of HIT tools, clinician scheduling, medical education. Conclusion: CCDI supports comparative effectiveness research of HIT tools. In addition, CCDI could have numerous applications including training, clinical trials, design of clinical workflows, and others. PMID:29854166

2 CFR 200.79 - Personally Identifiable Information (PII).

Code of Federal Regulations, 2014 CFR

2014-01-01

..., email address, home telephone number, and general educational credentials. The definition of PII is not anchored to any single category of information or technology. Rather, it requires a case-by-case assessment...

Implementation experiences of ISO/IEEE11073 standard applied to new use cases for e-health environments.

PubMed

Martinez, I; Escayola, J; Martinez-Espronceda, M; Serrano, L; Trigo, J D; Led, S; Garcia, J

2009-01-01

Recent advances in biomedical engineering and continuous technological innovations in last decade are promoting new challenges, especially in e-Health environments. In this context, the medical devices interoperability is one of the interest fields wherein these improvements require a standard-based design in order to achieve homogeneous solutions. Furthermore, the spreading of wearable devices, oriented to the paradigm of patient environment and supported by wireless technologies as Bluetooth or ZigBee, is bringing new medical use cases based on Ambient Assisted Living, home monitoring of elderly, heart failure, chronic, under palliative care or patients who have undergone surgery, urgencies and emergencies, or even fitness auto-control and health follow-up. In this paper, several implementation experiences based on ISO/IEEE11073 standard are detailed. These evolved e-Health services can improve the quality of the patient's care, increase the user's interaction, and assure these e-Health applications to be fully compatible with global telemedicine systems.

[Management of assisted reproductive technology (ART) in case of endometriosis related infertility: CNGOF-HAS Endometriosis Guidelines].

PubMed

Santulli, P; Collinet, P; Fritel, X; Canis, M; d'Argent, E M; Chauffour, C; Cohen, J; Pouly, J L; Boujenah, J; Poncelet, C; Decanter, C; Borghese, B; Chapron, C

2018-03-01

The management of endometriosis related infertility requires a global approach. In this context, the prescription of an anti-gonadotropic hormonal treatment does not increase the rate of non-ART (assisted reproductive technologies) pregnancies and it is not recommended. In case of endometriosis related infertility, the results of IVF management in terms of pregnancy and birth rates are not negatively affected by the existence of endometriosis. Controlled ovarian stimulation during IVF does not increase the risk of endometriosis associated symptoms worsening, nor accelerate the intrinsic progression of endometriosis and does not increase the rate of recurrence. However, in the context of IVF management for women with endometriosis, pre-treatment with GnRH agonist or with oestrogen/progestin contraception improve IVF outcomes. There is currently no evidence of a positive or negative effect of endometriosis surgery on IVF outcomes. Information on the possibilities of preserving fertility should be considered, especially before surgery. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

[Prosthetic rehabilitation of patients with parodontitis based upon the use of 3D-technologies--clinical case example].

PubMed

Riakhovskiĭ, A N

2011-01-01

Clinical case of prosthetic rehabilitation of patient (female) with generalized parodontitis complicated by defects and deformations of dentitions was offered. Using 3D-technologies position of teeth was corrected with the help of a series of temporary transparent splints-modifiers with subsequent guy splintage and esthetic 3D-planning of front teeth forms. Teeth forms correction was made by composite using preliminary prepared templet.

Enhancing Schistosomiasis Control Strategy for Zimbabwe: Building on Past Experiences

PubMed Central

Chimbari, Moses J.

2012-01-01

Schistosoma haematobium and Schistosoma mansoni are prevalent in Zimbabwe to levels that make schistosomiasis a public health problem. Following three national surveys to map the disease prevalence, a national policy on control of schistosomiasis and soil transmitted helminths is being developed. This paper reviews the experiences that Zimbabwe has in the area of schistosomiasis control with a view to influence policy. A case study approach to highlight key experiences and outcomes was adopted. The benefits derived from intersectoral collaboration that led to the development of a model irrigation scheme that incorporates schistosomiasis control measures are highlighted. Similarly, the benefits of using plant molluscicides and fish and duck biological agents (Sargochromis codringtonii and Cairina moschata) are highlighted. Emphasis was also placed on the importance of utilizing locally developed water and sanitation technologies and the critical human resource base in the area of schistosomiasis developed over years. After synthesis of the case studies presented, it was concluded that while there is a need to follow the WHO recommended guidelines for schistosomiasis control it is important to develop a control strategy that is informed by work already done in the country. The importance of having a policy and local guidelines for schistosomiasis control is emphasized. PMID:22655171

Evaluating the use of friend or family controls in epidemiologic case-control studies.

PubMed

Zhong, Charlie; Cockburn, Myles; Cozen, Wendy; Voutsinas, Jenna; Lacey, James V; Luo, Jianning; Sullivan-Halley, Jane; Bernstein, Leslie; Wang, Sophia S

2017-02-01

Traditional methodologies for identifying and recruiting controls in epidemiologic case-control studies, such as random digit dialing or neighborhood walk, suffer from declining response rates. Here, we revisit the feasibility and comparability of using alternative sources of controls, specifically friend and family controls. We recruited from a recently completed case-control study of non-Hodgkin lymphoma (NHL) among women in Los Angeles County where controls from the parent study were ascertained by neighborhood walk. We calculated participation rates and compared questionnaire responses between the friend/family controls and the original matched controls from the parent study. Of the 182 NHL case patients contacted, 111 (61%) agreed to participate in our feasibility study. 70 (63%) provided contact information for potential friend and/or family member controls. We were able to successfully contact and recruit a friend/family member for 92% of the case patients. This represented 46 friend controls and 54 family controls. Family controls significantly differed from original matched controls by sex and household income. Other characteristics were similar between friend controls and the original study's neighborhood controls. The apparent comparability of neighborhood controls to friend and family controls among respondents in this study suggests that these alternative methods of control identification can serve as a complementary source of eligible controls in epidemiologic case-control studies. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Minimizing the health and climate impacts of emissions from heavy-duty public transportation bus fleets through operational optimization.

PubMed

Gouge, Brian; Dowlatabadi, Hadi; Ries, Francis J

2013-04-16

In contrast to capital control strategies (i.e., investments in new technology), the potential of operational control strategies (e.g., vehicle scheduling optimization) to reduce the health and climate impacts of the emissions from public transportation bus fleets has not been widely considered. This case study demonstrates that heterogeneity in the emission levels of different bus technologies and the exposure potential of bus routes can be exploited though optimization (e.g., how vehicles are assigned to routes) to minimize these impacts as well as operating costs. The magnitude of the benefits of the optimization depend on the specific transit system and region. Health impacts were found to be particularly sensitive to different vehicle assignments and ranged from worst to best case assignment by more than a factor of 2, suggesting there is significant potential to reduce health impacts. Trade-offs between climate, health, and cost objectives were also found. Transit agencies that do not consider these objectives in an integrated framework and, for example, optimize for costs and/or climate impacts alone, risk inadvertently increasing health impacts by as much as 49%. Cost-benefit analysis was used to evaluate trade-offs between objectives, but large uncertainties make identifying an optimal solution challenging.

Effect of Primary Elective Cesarean Delivery on Placenta Accreta: A Case-Control Study.

PubMed

Shi, Xiao-Ming; Wang, Yan; Zhang, Yan; Wei, Yuan; Chen, Lian; Zhao, Yang-Yu

2018-03-20

Cesarean section (CS) is an independent risk factor for placenta accreta. Some researchers think that the timing of primary cesarean delivery is associated with placenta accreta in subsequent pregnancies. The aim of this study was to investigate the risk of placenta accreta following primary CS without labor, also called primary elective CS, in a pregnancy complicated with placenta previa. A retrospective, single-center, case-control study was conducted at Peking University Third Hospital. Relevant clinical data of singleton pregnancies between January 2010 and September 2017 were recorded. The case group included women with placenta accreta who had placenta previa and one previous CS. Control group included women with one previous CS that was complicated with placenta previa. Maternal age, body mass index, gestational age, fetal birth weight, gravity, parity, induced abortion, the rate of women received assisted reproductive technology, other uterine surgery, and primary elective CS were analyzed between the two groups. The rate of primary elective CS (90.1% vs. 69.9%, P < 0.001) was higher, and maternal age was younger (32.7 ± 4.7 years vs. 34.6 ± 4.0 years, P < 0.001) in case group, compared with control group. Case group also had higher gravity and induced abortions compared with the control group (both P < 0.05). Primary CS without labor was associated with significantly increased risk of placenta accreta in a subsequent pregnancy complicated with placenta previa (odds ratio: 3.32; 95% confidential interval: 1.68-6.58). Women with a primary elective CS without labor have a higher chance of developing an accreta in a subsequent pregnancy that is complicated with placenta previa.

Effect of Primary Elective Cesarean Delivery on Placenta Accreta: A Case-Control Study

PubMed Central

Shi, Xiao-Ming; Wang, Yan; Zhang, Yan; Wei, Yuan; Chen, Lian; Zhao, Yang-Yu

2018-01-01

Background: Cesarean section (CS) is an independent risk factor for placenta accreta. Some researchers think that the timing of primary cesarean delivery is associated with placenta accreta in subsequent pregnancies. The aim of this study was to investigate the risk of placenta accreta following primary CS without labor, also called primary elective CS, in a pregnancy complicated with placenta previa. Methods: A retrospective, single-center, case-control study was conducted at Peking University Third Hospital. Relevant clinical data of singleton pregnancies between January 2010 and September 2017 were recorded. The case group included women with placenta accreta who had placenta previa and one previous CS. Control group included women with one previous CS that was complicated with placenta previa. Maternal age, body mass index, gestational age, fetal birth weight, gravity, parity, induced abortion, the rate of women received assisted reproductive technology, other uterine surgery, and primary elective CS were analyzed between the two groups. Results: The rate of primary elective CS (90.1% vs. 69.9%, P < 0.001) was higher, and maternal age was younger (32.7 ± 4.7 years vs. 34.6 ± 4.0 years, P < 0.001) in case group, compared with control group. Case group also had higher gravity and induced abortions compared with the control group (both P < 0.05). Primary CS without labor was associated with significantly increased risk of placenta accreta in a subsequent pregnancy complicated with placenta previa (odds ratio: 3.32; 95% confidential interval: 1.68–6.58). Conclusion: Women with a primary elective CS without labor have a higher chance of developing an accreta in a subsequent pregnancy that is complicated with placenta previa. PMID:29521289

Developing an Ontology for Ocean Biogeochemistry Data

NASA Astrophysics Data System (ADS)

Chandler, C. L.; Allison, M. D.; Groman, R. C.; West, P.; Zednik, S.; Maffei, A. R.

2010-12-01

Semantic Web technologies offer great promise for enabling new and better scientific research. However, significant challenges must be met before the promise of the Semantic Web can be realized for a discipline as diverse as oceanography. Evolving expectations for open access to research data combined with the complexity of global ecosystem science research themes present a significant challenge, and one that is best met through an informatics approach. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) is funded by the National Science Foundation Division of Ocean Sciences to work with ocean biogeochemistry researchers to improve access to data resulting from their respective programs. In an effort to improve data access, BCO-DMO staff members are collaborating with researchers from the Tetherless World Constellation (Rensselaer Polytechnic Institute) to develop an ontology that formally describes the concepts and relationships in the data managed by the BCO-DMO. The project required transforming a legacy system of human-readable, flat files of metadata to well-ordered controlled vocabularies to a fully developed ontology. To improve semantic interoperability, terms from the BCO-DMO controlled vocabularies are being mapped to controlled vocabulary terms adopted by other oceanographic data management organizations. While the entire process has proven to be difficult, time-consuming and labor-intensive, the work has been rewarding and is a necessary prerequisite for the eventual incorporation of Semantic Web tools. From the beginning of the project, development of the ontology has been guided by a use case based approach. The use cases were derived from data access related requests received from members of the research community served by the BCO-DMO. The resultant ontology satisfies the requirements of the use cases and reflects the information stored in the metadata database. The BCO-DMO metadata database currently contains information that powers several different user and machine-to-machine interfaces to the BCO-DMO data repositories. One goal of the ontology development project is to enable subsequent development of semantically-enabled components (e.g. faceted search) to enhance the power of those interfaces. Addition of semantic capabilities to the existing data interfaces will improve data access through enhanced data discovery. In addition to sharing the ontology, we will describe the challenges encountered thus far in the project, the technologies currently being used, and the strategies associated with the use case based informatics approach.

Diversity in case management modalities: the Summit model.

PubMed

Peterson, G A; Drone, I D; Munetz, M R

1997-06-01

Though ubiquitous in community mental health agencies, case management suffers from a lack of consensus regarding its definition, essential components, and appropriate application. Meaningful comparisons of various case management models await such a consensus. Global assessments of case management must be replaced by empirical studies of specific interventions with respect to the needs of specific populations. The authors describe a highly differentiated and prescriptive system of case management involving the application of more than one model of service delivery. Such a diversified and targeted system offers an opportunity to study the technology of case management in a more meaningful manner.

Reliability of medical records in diagnosing inflammatory breast cancer in Egypt.

PubMed

Le, Lynne; Schairer, Catherine; Hablas, Ahmed; Meza, Jane; Watanabe-Galloway, Shinobu; Ramadan, Mohamed; Merajver, Sofia D; Seifeldin, Ibrahim A; Soliman, Amr S

2017-03-16

Inflammatory breast cancer (IBC) is a rare, aggressive breast cancer diagnosed clinically by the presence of diffuse erythema, peau d'orange, and edema that arise quickly in the affected breast. This study evaluated the validity of medical records in Gharbiah, Egypt in identifying clinical signs/symptoms of IBC. For 34 IBC cases enrolled in a case-control study at the Gharbiah Cancer Society and Tanta Cancer Center, Egypt (2009-2010), we compared signs/symptoms of IBC noted in medical records to those recorded on a standardized form at the time of IBC diagnosis by clinicians participating in the case-control study. We calculated the sensitivity and specificity of medical records as compared to the case-control study for recording these signs/symptoms. We also performed McNemar's tests. In the case-control study, 32 (94.1%) IBC cases presented with peau d'orange, 30 (88.2%) with erythema, and 31 (91.2%) with edema. The sensitivities of the medical records as compared to the case-control study were 0.8, 0.5, and 0.2 for peau d'orange, erythema, and edema, respectively. Corresponding specificities were 1.0, 0.5, and 1.0. p values for McNemar's test were <0.05 for all signs. Medical records had data on the extent and duration of signs for at most 27% of cases for which this information was recorded in the case-control study. Twenty-three of the 34 cases (67.6%) had confirmed diagnosis of IBC in their medical records. Medical records lacked information on signs/symptoms of IBC, especially erythema and edema, when compared to the case-control study. Deficient medical records could have implications for diagnosis and treatment of IBC and proper documentation of cases in cancer registries.

Building Adaptive Capacity of Pathways in Technology Early College High School Stakeholders: A Multiple-Case Study on the Influence of Performance, Leadership, and Organizational Learning

ERIC Educational Resources Information Center

Michaud-Wells, Amy

2016-01-01

The purpose of this qualitative study was to explore the perceptions and beliefs of Pathways in Technology Early College High School (P-TECH) leaders and stakeholders regarding the personal and professional experiences that contributed to the development of adaptive capacity. This embedded multiple-case study was anchored by the interrelated…

A Case Study for Evaluating the Diffusion of Computing Technology in Teaching Undergraduates by a Faculty in a Journalism and Mass Communication Program.

ERIC Educational Resources Information Center

Terry, Janet L.; Geske, Joel

A case study investigated how journalism and mass communication faculty members diffused and used computing technology in teaching. Subjects, 21 tenured and tenure-track faculty members in a mid-sized journalism and mass communication department, completed an indepth questionnaire designed to measure the general attitude of the faculty towards…

Public School Teacher Use of Instructional Technology from an Organizational Culture Perspective: An Explanatory Case Study of Two Middle Schools

ERIC Educational Resources Information Center

Spitzer, Bruce Alan; Stansbury, Susan

2004-01-01

The purpose of this qualitative case study is to study the organizational culture and context of two school sites in which instructional technology (IT) use by teachers is evident; to study what and who influences individual teacher preferences toward IT use; and to describe the relationship of Mary Douglas' (1982, 1989, 1992) grid and group…

Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

ERIC Educational Resources Information Center

Gibson, Ken

2013-01-01

This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

Comparison of Estimates between Cohort and Case-Control Studies in Meta-Analyses of Therapeutic Interventions: A Meta-Epidemiological Study.

PubMed

Lanza, Amy; Ravaud, Philippe; Riveros, Carolina; Dechartres, Agnes

2016-01-01

Observational studies are increasingly being used for assessing therapeutic interventions. Case-control studies are generally considered to have greater risk of bias than cohort studies, but we lack evidence of differences in effect estimates between the 2 study types. We aimed to compare estimates between cohort and case-control studies in meta-analyses of observational studies of therapeutic interventions by using a meta-epidemiological study. We used a random sample of meta-analyses of therapeutic interventions published in 2013 that included both cohort and case-control studies assessing a binary outcome. For each meta-analysis, the ratio of estimates (RE) was calculated by comparing the estimate in case-control studies to that in cohort studies. Then, we used random-effects meta-analysis to estimate a combined RE across meta-analyses. An RE < 1 indicated that case-control studies yielded larger estimates than cohort studies. The final analysis included 23 meta-analyses: 138 cohort and 133 case-control studies. Treatment effect estimates did not significantly differ between case-control and cohort studies (combined RE 0.97 [95% CI 0.86-1.09]). Heterogeneity was low, with between-meta-analysis variance τ2 = 0.0049. Estimates did not differ between case-control and prospective or retrospective cohort studies (RE = 1.05 [95% CI 0.96-1.15] and RE = 0.99 [95% CI, 0.83-1.19], respectively). Sensitivity analysis of studies reporting adjusted estimates also revealed no significant difference (RE = 1.03 [95% CI 0.91-1.16]). Heterogeneity was also low for these analyses. We found no significant difference in treatment effect estimates between case-control and cohort studies assessing therapeutic interventions.

Effectiveness of reactive oral cholera vaccination in rural Haiti: a case-control study and bias-indicator analysis.

PubMed

Ivers, Louise C; Hilaire, Isabelle J; Teng, Jessica E; Almazor, Charles P; Jerome, J Gregory; Ternier, Ralph; Boncy, Jacques; Buteau, Josiane; Murray, Megan B; Harris, Jason B; Franke, Molly F

2015-03-01

Between April and June, 2012, a reactive cholera vaccination campaign was done in Haiti with an oral inactivated bivalent whole-cell vaccine. We aimed to assess the effectiveness of the vaccine in a case-control study and to assess the likelihood of bias in that study in a bias-indicator study. Residents of Bocozel or Grand Saline who were eligible for the vaccination campaign (ie, age ≥12 months, not pregnant, and living in the region at the time of the vaccine campaign) were included. In the primary case-control study, cases had acute watery diarrhoea, sought treatment at one of three participating cholera treatment units, and had a stool sample positive for cholera by culture. For each case, four control individuals who did not seek treatment for acute watery diarrhoea were matched by location of residence, enrolment time (within 2 weeks of the case), and age (1-4 years, 5-15 years, and >15 years). Cases in the bias-indicator study were individuals with acute watery diarrhoea with a negative stool sample for cholera. Controls were selected in the same manner as in the primary case-control study. Trained staff used standard laboratory procedures to do rapid tests and stool cultures from study cases. Participants were interviewed to collect data on sociodemographic characteristics, risk factors for cholera, and self-reported vaccination. Data were analysed by conditional logistic regression, adjusting for matching factors. From Oct 24, 2012, to March 9, 2014, 114 eligible individuals presented with acute watery diarrhoea and were enrolled, 25 of whom were subsequently excluded. 47 participants were analysed as cases in the vaccine effectiveness case-control study and 42 as cases in the bias-indicator study. 33 (70%) of 47 cholera cases self-reported vaccination versus 167 (89%) of 188 controls (vaccine effectiveness 63%, 95% CI 8-85). 27 (57%) of 47 cases had certified vaccination versus 147 (78%) of 188 controls (vaccine effectiveness 58%, 13-80). Neither self-reported nor verified vaccination was significantly associated with non-cholera diarrhoea (vaccine effectiveness 18%, 95% CI -208 to 78 by self-report and -21%, -238 to 57 by verified vaccination). Bivalent whole-cell oral cholera vaccine effectively protected against cholera in Haiti from 4 months to 24 months after vaccination. Vaccination is an important component of efforts to control cholera epidemics. National Institutes of Health, Delivering Oral Vaccines Effectively project, and Department of Global Health and Social Medicine at Harvard Medical School. Copyright © 2015 Ivers et al. Open Access article distributed under the terms of CC BY-NC-ND. Published by .. All rights reserved.

Response rates in case-control studies of cancer by era of fieldwork and by characteristics of study design.

PubMed

Xu, Mengting; Richardson, Lesley; Campbell, Sally; Pintos, Javier; Siemiatycki, Jack

2018-04-09

The purpose of this study was to describe time trends in response rates in case-control studies of cancer and identify study design factors that influence response rate. We reviewed 370 case-control studies of cancer published in 12 journals during indicator years in each of the last four decades. We estimated time trends of response rates and reasons for nonresponse in each of the following types of study subjects: cases, medical source controls, and population controls. We also estimated response rates according to characteristics of study context. Median response rates among cases and population controls were between 75% and 80% in the 1970s. Between 1971 and 2010, study response rates declined by 0.31% per year for cases and 0.78% for population controls. Only a minority of studies reported reasons for nonparticipation; subject refusal was the most common reported reason. Studies conducted in North America had lower median response rates than studies conducted in Europe. In-person and telephone interviews elicited higher response rates than mail questionnaires. Response rates from case-control studies of cancer have declined, and this could threaten the validity of results derived from these studies. Copyright © 2018 Elsevier Inc. All rights reserved.

UK case control study of brain tumours in children, teenagers and young adults: a pilot study.

PubMed

Feltbower, Richard G; Fleming, Sarah J; Picton, Susan V; Alston, Robert D; Morgan, Diana; Achilles, Janice; McKinney, Patricia A; Birch, Jillian M

2014-01-08

Tumours of the central nervous system are the second most common group of childhood cancers in 0-14 year olds (24% of total cancers) and represent a major diagnostic group in 15-24 year olds. The pilot case-control study aimed to establish methodologies for a future comprehensive aetiological investigation among children and young adults. Eligible cases were newly diagnosed with an intracranial tumour of neuroepithelial tissue aged 0-24 years. The pilot recruited patients through Leeds and Manchester Principal Treatment Centres. Controls were drawn from general practice lists. Controls were frequency matched by age and gender. We interviewed 49 cases and 78 controls comprising 85% of the target sample size. Response rates were 52% for cases and 32% for controls. Completion of the questionnaire was successful, with a very small proportion of missing data being reported (5-10%). The age distribution of cases and controls was similar with around three-quarters of interviewed subjects aged 0-14. Half of cases and almost two-thirds of controls reported using a mobile phone with the majority starting between 10-14 years of age. Prevalence of breastfeeding was lower in cases than controls (Odds Ratio 0.4; 95% CI 0.2-1.2), whilst cases were more likely to be delivered by caesarean section (OR 1.6; 95% CI 0.6-4.4). Cases were significantly more likely to have a birthweight > 3.5 kg compared to controls. Cases were also more likely to come from a family with 3 or more siblings than controls (OR 3.0; 95% CI 0.7-13.6). The majority of participants (>80%) were in favour of taking either blood or saliva to aid molecular epidemiological research. Successful methods were established for identifying and recruiting a high proportion of case subjects, exploiting strong links with the clinical teams at the treatment centres. Control procedures proved more difficult to implement. However, working closely with national clinical and professional research networks will enable improved control identification and recruitment, with good prospects for collecting biological samples in the future.

Addressing the Nets for Students through Constructivist Technology Use in K-12 Classrooms

ERIC Educational Resources Information Center

Niederhauser, Dale S.; Lindstrom, Denise L.

2006-01-01

The National Educational Technology Standards for Students promote constructivist technology use for K-12 students in U.S. schools. In this study, researchers reported on 716 cases in which teachers described technology-based activities they conducted with their students. Narrative analysis was used to examine case transcripts relative to the…

Data Fusion

DTIC Science & Technology

2014-05-01

CDiff Antibiotics) 4.5.3 Preliminary Results of Prototype 1 Figure 5: Mapped Cases of Clostridium difficile by ward over 1 year KGH C. Diff. All...Quarters Figure 6: Mapped Cases of Clostridium difficile by ward over 3 months KGH C. Diff. Q1 Figure 7: Mapped Cases of Methicillin Resistant Staph...Competing Technologies B-2 Schedule Performance Summary B-3 Cost Performance Summary Annex C Publications, Presentations, Patents Bibliography List of

Historical Examples of Misrepresentation, Innovation, and Morality in Physical Science and Technology

NASA Astrophysics Data System (ADS)

Buchwald, Jed

2016-03-01

The pressures of publication, the desire to be first in innovation, and moral convictions have long been at work in the history of science and technology. Historians think and argue best through stories, so I've chosen three examples that exemplify one or more of these aspects. The first involves the discovery of electric waves by Heinrich Hertz in 1888; the second concerns the controlled production of electromagnetic radiation by Marconi and Fleming in the early 1900s; our final case involves a bitter controversy between the physicist Hermann von Helmholtz and the astronomer Friedrich Zöllner in the 1890s.

Use of multiple sensor technologies for quality control of in situ biogeochemical measurements: A SeaCycler case study

NASA Astrophysics Data System (ADS)

Atamanchuk, Dariia; Koelling, Jannes; Lai, Jeremy; Send, Uwe; Wallace, Douglas

2017-04-01

Over the last two decades observing capacity for the global ocean has increased dramatically. Emerging sensor technologies for dissolved gases, nutrients and bio-optical properties in seawater are allowing extension of in situ observations beyond the traditionally measured salinity, temperature and pressure (CTD). However the effort to extend observations using autonomous instruments and platforms carries the risk of losing the level of data quality achievable through conventional water sampling techniques. We will present results from a case study with the SeaCycler profiling winch focusing on quality control of the in-situ measurements. A total of 13 sensors were deployed from May 2016 to early 2017 on SeaCycler's profiling sensor float, including CTD, dissolved oxygen (O2, 3 sensors), carbon dioxide (pCO2, 2 sensors), nutrients, velocity sensors, fluorometer, transmissometer, single channel PAR sensor, and others. We will highlight how multiple measurement technologies (e.g. for O2 and CO2) complement each other and result in a high quality data product. We will also present an initial assessment of the bio-optical data, their implications for seasonal phytoplankton dynamics and comparisons to climatologies and ocean-color data products obtained from the MODIS satellite.

Mapping knowledge translation and innovation processes in Cancer Drug Development: the case of liposomal doxorubicin.

PubMed

Fajardo-Ortiz, David; Duran, Luis; Moreno, Laura; Ochoa, Hector; Castaño, Victor M

2014-09-03

We explored how the knowledge translation and innovation processes are structured when theyresult in innovations, as in the case of liposomal doxorubicin research. In order to map the processes, a literature network analysis was made through Cytoscape and semantic analysis was performed by GOPubmed which is based in the controlled vocabularies MeSH (Medical Subject Headings) and GO (Gene Ontology). We found clusters related to different stages of the technological development (invention, innovation and imitation) and the knowledge translation process (preclinical, translational and clinical research), and we were able to map the historic emergence of Doxil as a paradigmatic nanodrug. This research could be a powerful methodological tool for decision-making and innovation management in drug delivery research.

Sustainable Software Decisions for Long-term Projects (Invited)

NASA Astrophysics Data System (ADS)

Shepherd, A.; Groman, R. C.; Chandler, C. L.; Gaylord, D.; Sun, M.

2013-12-01

Adopting new, emerging technologies can be difficult for established projects that are positioned to exist for years to come. In some cases the challenge lies in the pre-existing software architecture. In others, the challenge lies in the fluctuation of resources like people, time and funding. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) was created in late 2006 by combining the data management offices for the U.S. GLOBEC and U.S. JGOFS programs to publish data for researchers funded by the National Science Foundation (NSF). Since its inception, BCO-DMO has been supporting access and discovery of these data through web-accessible software systems, and the office has worked through many of the challenges of incorporating new technologies into its software systems. From migrating human readable, flat file metadata storage into a relational database, and now, into a content management system (Drupal) to incorporating controlled vocabularies, new technologies can radically affect the existing software architecture. However, through the use of science-driven use cases, effective resource management, and loosely coupled software components, BCO-DMO has been able to adapt its existing software architecture to adopt new technologies. One of the latest efforts at BCO-DMO revolves around applying metadata semantics for publishing linked data in support of data discovery. This effort primarily affects the metadata web interface software at http://bco-dmo.org and the geospatial interface software at http://mapservice.bco-dmo.org/. With guidance from science-driven use cases and consideration of our resources, implementation decisions are made using a strategy to loosely couple the existing software systems to the new technologies. The results of this process led to the use of REST web services and a combination of contributed and custom Drupal modules for publishing BCO-DMO's content using the Resource Description Framework (RDF) via an instance of the Virtuoso Open-Source triplestore.

An adolescent suicide cluster and the possible role of electronic communication technology.

PubMed

Robertson, Lindsay; Skegg, Keren; Poore, Marion; Williams, Sheila; Taylor, Barry

2012-01-01

Since the development of Centers for Disease Control's (CDC) guidelines for the management of suicide clusters, the use of electronic communication technologies has increased dramatically. To describe an adolescent suicide cluster that drew our attention to the possible role of online social networking and SMS text messaging as sources of contagion after a suicide and obstacles to recognition of a potential cluster. A public health approach involving a multidisciplinary community response was used to investigate a group of suicides of New Zealand adolescents thought to be a cluster. Difficulties in identifying and managing contagion posed by use of electronic communications were assessed. The probability of observing a time-space cluster such as this by chance alone was p = .009. The cases did not belong to a single school, rather several were linked by social networking sites, including sites created in memory of earlier suicide cases, as well as mobile telephones. These facilitated the rapid spread of information and rumor about the deaths throughout the community. They made the recognition and management of a possible cluster more difficult. Relevant community agencies should proactively develop a strategy to enable the identification and management of suicide contagion. Guidelines to assist communities in managing clusters should be updated to reflect the widespread use of communication technologies in modern society.

Thrust vector control using electric actuation

NASA Astrophysics Data System (ADS)

Bechtel, Robert T.; Hall, David K.

1995-01-01

Presently, gimbaling of launch vehicle engines for thrust vector control is generally accomplished using a hydraulic system. In the case of the space shuttle solid rocket boosters and main engines, these systems are powered by hydrazine auxiliary power units. Use of electromechanical actuators would provide significant advantages in cost and maintenance. However, present energy source technologies such as batteries are heavy to the point of causing significant weight penalties. Utilizing capacitor technology developed by the Auburn University Space Power Institute in collaboration with the Auburn CCDS, Marshall Space Flight Center (MSFC) and Auburn are developing EMA system components with emphasis on high discharge rate energy sources compatible with space shuttle type thrust vector control requirements. Testing has been done at MSFC as part of EMA system tests with loads up to 66000 newtons for pulse times of several seconds. Results show such an approach to be feasible providing a potential for reduced weight and operations costs for new launch vehicles.

INTESTINAL PARASITES IN DIABETIC PATIENTS IN SOHAG UNIVERSITY HOSPITALS, EGYPT.

PubMed

Elnadi, Nada A; Hassanien, Hassan A; Ahmad, Amal M; Abd Ellah, Asmaa K

2015-08-01

Intestinal parasites usually create benign diseases, though they may induce complications with high morbidity and mortality to the immunocompromised, including diabetic patients. The study detected the prevalence of intestinal parasitic infections in diabetic patients, comparing to non-diabetic controls and other parameters. A total of 100 fecal samples were collected from diabetic patients at the outpatient clinic of Sohag University Hospitals and another 100 from cross matched controls. The samples were examined macroscopically and microscopically by direct smear and different concentration methods then stained by Modified Ziehl-Neelsen Acid fast stain. Glycated hemoglobin (Hb Alc) was measured to detect DM controlled patients. The data were organized, tabulated, and statistically analyzed. Intestinal parasites were found in 25 (25%) cases out of 100 patients in diabetic group and 7(7%) cases out of 100 controls with high significance (P<0.001)). In the diabetic group, Giardia lamblia was detected in 22 cases (22%) and 5 (5%) among controls, Entamoeba histolytica in 7 cases (7%) and 3 (3%) among controls, Hymenolypis nana in 5 cases (5%) and 3 (3%) among controls, Entamoeba coli in 8 patients (8%), Entamoeba hartmanni in 3 cases (3%), Dientamoeba fragilis in a case (1%), Cryptosporidium parvum in 5 cases (5%) and microsporidia in 3 cases (3%). But, E. coli, E. hartmanni, D. fragilis and C. parvum nor microsporidia were detected in controls. The rate of G. lamblia in DM patients compared to controls was high significant (P<0.001). Hymenolepis nana was 5% (5 cases) in diabetic patients compared to 3% (3 cases) in controls. Residence and sex differences were not significant, while age, >10 years showed the highest prevalence (P< 0.003), type I infection rate was significantly higher than type II (P<0.001). DM control was also significantly affected the infection rates (P<0.007 in type I and P< 0.01 in type II).

Multidisciplinary Techniques and Novel Aircraft Control Systems

NASA Technical Reports Server (NTRS)

Padula, Sharon L.; Rogers, James L.; Raney, David L.

2000-01-01

The Aircraft Morphing Program at NASA Langley Research Center explores opportunities to improve airframe designs with smart technologies. Two elements of this basic research program are multidisciplinary design optimization (MDO) and advanced flow control. This paper describes examples where MDO techniques such as sensitivity analysis, automatic differentiation, and genetic algorithms contribute to the design of novel control systems. In the test case, the design and use of distributed shape-change devices to provide low-rate maneuvering capability for a tailless aircraft is considered. The ability of MDO to add value to control system development is illustrated using results from several years of research funded by the Aircraft Morphing Program.

Multidisciplinary Techniques and Novel Aircraft Control Systems

NASA Technical Reports Server (NTRS)

Padula, Sharon L.; Rogers, James L.; Raney, David L.

2000-01-01

The Aircraft Morphing Program at NASA Langley Research Center explores opportunities to improve airframe designs with smart technologies. Two elements of this basic research program are multidisciplinary design optimization (MDO) and advanced flow control. This paper describes examples where MDO techniques such as sensitivity analysis, automatic differentiation, and genetic algorithms contribute to the design of novel control systems. In the test case, the design and use of distributed shapechange devices to provide low-rate maneuvering capability for a tailless aircraft is considered. The ability of MDO to add value to control system development is illustrated using results from several years of research funded by the Aircraft Morphing Program.

Case factors affecting hearing aid recommendations by hearing care professionals.

PubMed

Gioia, Carmine; Ben-Akiva, Moshe; Kirkegaard, Matilde; Jørgensen, Ole; Jensen, Kasper; Schum, Don

2015-03-01

Professional recommendations to patients concerning hearing instrument (HI) technology levels are not currently evidence-based. Pre-fitting parameters have not been proven to be the primary indicators for optimal patient outcome with different HI technology levels. This results in subjective decision-making as regards the technology level recommendation made by professionals. The objective of this study is to gain insight into the decision-making criteria utilized by professionals when recommending HI technology levels to hearing-impaired patients. A set of patient variables (and their respective levels) was identified by professionals as determinant for their recommendation of HIs. An experimental design was developed and 21 representative patient cases were generated. The design was based on a contrastive vignette technique according to which different types of vignettes (patient cases) were randomly presented to respondents in an online survey. Based on these patient cases, professionals were asked in the survey to make a treatment recommendation. The online survey was sent to approximately 3,500 professionals from the US, Germany, France, and Italy. The professionals were randomly selected from the databases of Oticon sales companies. The manufacturer sponsoring the survey remained anonymous and was only revealed after completing the survey, if requested by the respondent. The response rate was 20.5%. Data comprised of respondent descriptions and patient case recommendations that were collected from the online survey. A binary logit modeling approach was used to identify the variables that discriminate between the respondents' recommendations of HI technology levels. The results show that HI technology levels are recommended by professionals based on their perception of the patient's activity level in life, the level of HI usage for experienced users, their age, and their speech discrimination score. Surprisingly, the patient's lifestyle as perceived by the hearing care professional, followed by speech discrimination, were the strongest factors in explaining treatment recommendation. An active patient with poor speech discrimination had a 17% chance of being recommended the highest technology level HI. For a very active patient with good speech discrimination, the probability increases to 68%. The discrepancies in HI technology level recommendations are not justified by academic research or evidence of optimal patient outcome with a different HI technology level. The paradigm of lifestyle as the significant variable identified in this study is apparently deeply anchored in the mindset of the professional despite the lack of supporting evidence. These results call for a shift in the professional's technology level recommendation practice, from nonevidence-based to a proven practice that can maximize patient outcome. American Academy of Audiology.

Tracing Growth of Teachers' Classroom Interactions with Representations of Functions in the Connected Classroom

NASA Astrophysics Data System (ADS)

Morton, Brian Lee

The purpose of this study is to create an empirically based theoretic model of change of the use and treatment of representations of functions with the use of Connected Classroom Technology (CCT) using data previously collected for the Classroom Connectivity in Promoting Mathematics and Science Achievement (CCMS) project. Qualitative analysis of videotapes of three algebra teachers' instruction focused on different categories thought to influence teaching representations with technology: representations, discourse, technology, and decisions. Models for rating teachers low, medium, or high for each of these categories were created using a priori codes and grounded methodology. A cross case analysis was conducted after the completion of the case studies by comparing and contrasting the three cases. Data revealed that teachers' decisions shifted to incorporate the difference in student ideas/representations made visible by the CCT into their instruction and ultimately altered their orientation to mathematics teaching. The shift in orientation seemed to lead to the teachers' growth with regards to representations, discourse, and technology.

SOMWeb: a semantic web-based system for supporting collaboration of distributed medical communities of practice.

PubMed

Falkman, Göran; Gustafsson, Marie; Jontell, Mats; Torgersson, Olof

2008-08-26

Information technology (IT) support for remote collaboration of geographically distributed communities of practice (CoP) in health care must deal with a number of sociotechnical aspects of communication within the community. In the mid-1990s, participants of the Swedish Oral Medicine Network (SOMNet) began discussing patient cases in telephone conferences. The cases were distributed prior to the conferences using PowerPoint and email. For the technical support of online CoP, Semantic Web technologies can potentially fulfill needs of knowledge reuse, data exchange, and reasoning based on ontologies. However, more research is needed on the use of Semantic Web technologies in practice. The objectives of this research were to (1) study the communication of distributed health care professionals in oral medicine; (2) apply Semantic Web technologies to describe community data and oral medicine knowledge; (3) develop an online CoP, Swedish Oral Medicine Web (SOMWeb), centered on user-contributed case descriptions and meetings; and (4) evaluate SOMWeb and study how work practices change with IT support. Based on Java, and using the Web Ontology Language and Resource Description Framework for handling community data and oral medicine knowledge, SOMWeb was developed using a user-centered and iterative approach. For studying the work practices and evaluating the system, a mixed-method approach of interviews, observations, and a questionnaire was used. By May 2008, there were 90 registered users of SOMWeb, 93 cases had been added, and 18 meetings had utilized the system. The introduction of SOMWeb has improved the structure of meetings and their discussions, and a tenfold increase in the number of participants has been observed. Users submit cases to seek advice on diagnosis or treatment, to show an unusual case, or to create discussion. Identified barriers to submitting cases are lack of time, concern about whether the case is interesting enough, and showing gaps in one's own knowledge. Three levels of member participation are discernable: a core group that contributes most cases and most meeting feedback; an active group that participates often but only sometimes contribute cases and feedback; and a large peripheral group that seldom or never contribute cases or feedback. SOMWeb is beneficial for individual clinicians as well as for the SOMNet community. The system provides an opportunity for its members to share both high quality clinical practice knowledge and external evidence related to complex oral medicine cases. The foundation in Semantic Web technologies enables formalization and structuring of case data that can be used for further reasoning and research. Main success factors are the long history of collaboration between different disciplines, the user-centered development approach, the existence of a "champion" within the field, and nontechnical community aspects already being in place.

SOMWeb: A Semantic Web-Based System for Supporting Collaboration of Distributed Medical Communities of Practice

PubMed Central

Gustafsson, Marie; Jontell, Mats; Torgersson, Olof

2008-01-01

Background Information technology (IT) support for remote collaboration of geographically distributed communities of practice (CoP) in health care must deal with a number of sociotechnical aspects of communication within the community. In the mid-1990s, participants of the Swedish Oral Medicine Network (SOMNet) began discussing patient cases in telephone conferences. The cases were distributed prior to the conferences using PowerPoint and email. For the technical support of online CoP, Semantic Web technologies can potentially fulfill needs of knowledge reuse, data exchange, and reasoning based on ontologies. However, more research is needed on the use of Semantic Web technologies in practice. Objectives The objectives of this research were to (1) study the communication of distributed health care professionals in oral medicine; (2) apply Semantic Web technologies to describe community data and oral medicine knowledge; (3) develop an online CoP, Swedish Oral Medicine Web (SOMWeb), centered on user-contributed case descriptions and meetings; and (4) evaluate SOMWeb and study how work practices change with IT support. Methods Based on Java, and using the Web Ontology Language and Resource Description Framework for handling community data and oral medicine knowledge, SOMWeb was developed using a user-centered and iterative approach. For studying the work practices and evaluating the system, a mixed-method approach of interviews, observations, and a questionnaire was used. Results By May 2008, there were 90 registered users of SOMWeb, 93 cases had been added, and 18 meetings had utilized the system. The introduction of SOMWeb has improved the structure of meetings and their discussions, and a tenfold increase in the number of participants has been observed. Users submit cases to seek advice on diagnosis or treatment, to show an unusual case, or to create discussion. Identified barriers to submitting cases are lack of time, concern about whether the case is interesting enough, and showing gaps in one’s own knowledge. Three levels of member participation are discernable: a core group that contributes most cases and most meeting feedback; an active group that participates often but only sometimes contribute cases and feedback; and a large peripheral group that seldom or never contribute cases or feedback. Conclusions SOMWeb is beneficial for individual clinicians as well as for the SOMNet community. The system provides an opportunity for its members to share both high quality clinical practice knowledge and external evidence related to complex oral medicine cases. The foundation in Semantic Web technologies enables formalization and structuring of case data that can be used for further reasoning and research. Main success factors are the long history of collaboration between different disciplines, the user-centered development approach, the existence of a “champion” within the field, and nontechnical community aspects already being in place. PMID:18725355

Development of an antimicrobial stewardship-based infectious diseases elective that incorporates human patient simulation technology.

PubMed

Falcione, Bonnie A; Meyer, Susan M

2014-10-15

To design an elective for pharmacy students that facilitates antimicrobial stewardship awareness, knowledge, and skill development by solving clinical cases, using human patient simulation technology. The elective was designed for PharmD students to describe principles and functions of stewardship programs, select, evaluate, refine, or redesign patient-specific plans for infectious diseases in the context of antimicrobial stewardship, and propose criteria and stewardship management strategies for an antimicrobial class at a health care institution. Teaching methods included active learning and lectures. Cases of bacterial endocarditis and cryptococcal meningitis were developed that incorporated human patient simulation technology. Forty-five pharmacy students completed an antimicrobial stewardship elective between 2010 and 2013. Outcomes were assessed using student perceptions of and performance on rubric-graded assignments. A PharmD elective using active learning, including novel cases conducted with human patient simulation technology, enabled outcomes consistent with those desired of pharmacists assisting in antimicrobial stewardship programs.

Energy-Based Facial Rejuvenation: Advances in Diagnosis and Treatment.

PubMed

Britt, Christopher J; Marcus, Benjamin

2017-01-01

The market for nonsurgical, energy-based facial rejuvenation techniques has increased exponentially since lasers were first used for skin rejuvenation in 1983. Advances in this area have led to a wide range of products that require the modern facial plastic surgeon to have a large repertoire of knowledge. To serve as a guide for current trends in the development of technology, applications, and outcomes of laser and laser-related technology over the past 5 years. We performed a review of PubMed from January 1, 2011, to March 1, 2016, and focused on randomized clinical trials, meta-analyses, systematic reviews, and clinical practice guidelines including case control, case studies and case reports when necessary, and included 14 articles we deemed landmark articles before 2011. Three broad categories of technology are leading non-energy-based rejuvenation technology: lasers, light therapy, and non-laser-based thermal tightening devices. Laser light therapy has continued to diversify with the use of ablative and nonablative resurfacing technologies, fractionated lasers, and their combined use. Light therapy has developed for use in combination with other technologies or stand alone. Finally, thermally based nonlaser skin-tightening devices, such as radiofrequency (RF) and intense focused ultrasonography (IFUS), are evolving technologies that have changed rapidly over the past 5 years. Improvements in safety and efficacy for energy-based treatment have expanded the patient base considering these therapies viable options. With a wide variety of options, the modern facial plastic surgeon can have a frank discussion with the patient regarding nonsurgical techniques that were never before available. Many of these patients can now derive benefit from treatments requiring significantly less downtime than before while the clinician can augment the treatment to maximize benefit to fit the patient's time schedule.

Impact of 3D virtual planning on reconstruction of mandibular and maxillary surgical defects in head and neck oncology.

PubMed

Witjes, Max J H; Schepers, Rutger H; Kraeima, Joep

2018-04-01

This review describes the advances in 3D virtual planning for mandibular and maxillary reconstruction surgical defects with full prosthetic rehabilitation. The primary purpose is to provide an overview of various techniques that apply 3D technology safely in primary and secondary reconstructive cases of patients suffering from head and neck cancer. Methods have been developed to overcome the problem of control over the margin during surgery while the crucial decision with regard to resection margin and planning of osteotomies were predetermined by virtual planning. The unlimited possibilities of designing patient-specific implants can result in creative uniquely applied solutions for single cases but should be applied wisely with knowledge of biomechanical engineering principles. The high surgical accuracy of an executed 3D virtual plan provides tumor margin control during ablative surgery and the possibility of planned combined use of osseus free flaps and dental implants in the reconstruction in one surgical procedure. A thorough understanding of the effects of radiotherapy on the reconstruction, soft tissue management, and prosthetic rehabilitation is imperative in individual cases when deciding to use dental implants in patients who received radiotherapy.

The Case Study Technologies as the Means of Competency Building Approach Realization in Higher Education of Russia

ERIC Educational Resources Information Center

Abdrafikova, Albina R.; Konopatskaya, Ekaterina A.

2014-01-01

The problem of increasing education efficiency in Russian high school under the condition of well-organized educational process with using "Case-study" technology is considered in the article. The article is devoted to the methodology of case study, and especially its implementation in Kazan Federal University, the Institute of Philology…

Task-Based Language Teaching with Smartphones: A Case Study in Pakistan

ERIC Educational Resources Information Center

Rashid, Shaista; Cunningham, Una; Watson, Kevin

2017-01-01

Integration of technology in task-based language teaching (TBLT) has long been a source of attraction for language teachers (Pierson, 2015). In the case of developing countries, such as Pakistan, mobile phones are the modern form of technology commonly available at low cost to individuals as well as institutions. The present descriptive case study…

Using a Technology-Based Case to Aid in Improving Assessment

ERIC Educational Resources Information Center

Zelin, Robert C., II

2008-01-01

This paper describes how a technology-based case using Microsoft Access can aid in the assessment process. A case was used in lieu of giving a final examination in an Accounting Information Systems course. Students worked in small groups to design a database-driven payroll system for a hypothetical company. Each group submitted its results along…

Associated factors and outcomes for OXA-232 Carbapenem-resistant Enterobacteriaceae infections in a tertiary care centre in Mexico City: A case-control-control study.

PubMed

Torres-González, Pedro; Ortiz-Brizuela, Edgar; Cervera-Hernandez, Miguel Enrique; Bobadilla-Del Valle, Miriam; Martínez-Gamboa, Areli; Sifuentes-Osornio, José; Ponce-de-Leon, Alfredo

2016-10-01

We describe the outcomes and factors associated with OXA-232 producing carbapenem-resistant Enterobacteriaceae infections. A case-control-control study was performed; each case of infection by a carbapenem-resistant/OXA-232 (OXA-232-cases, n=27) was matched by isolation site, species, and date, with 2 cases of infection by carbapenem-susceptible/third-generation cephalosporin-susceptible (TGCS-controls, n=54) and 2 cases by carbapenem-susceptible/ESBL producing Enterobacteriaceae (ESBL-controls, n=54); 66% were urinary tract and 18.5% intra-abdominal infections. In the multivariable analysis with ESBL-controls, previous use β-lactam/β-lactamase antibiotics (OR 6.2; 95% CI 1.6-23.8) and, third-generation cephalosporins (OR 0.2; 95% CI 0.05-0.8) were associated with OXA-232 infection; with TGSC-controls previous use of β-lactam/β-lactamase antibiotics (OR 3.7; 95% 1.1-12.0) was associated. Among the OXA-232-cases, 29% received imipenem/cilastatin or meropenem, 11.1% ceftriaxone, 22.2% a carbapenem-based combination and 33.3% other antimicrobials as treatment. Previous β-lactam/β-lactamase antibiotics are associated with OXA-232 infections, and some may be treated with other active carbapenems or, in the absence of ESBL, third-generation cephalosporins. Copyright © 2016 Elsevier Inc. All rights reserved.

Machine learning, social learning and the governance of self-driving cars.

PubMed

Stilgoe, Jack

2018-02-01

Self-driving cars, a quintessentially 'smart' technology, are not born smart. The algorithms that control their movements are learning as the technology emerges. Self-driving cars represent a high-stakes test of the powers of machine learning, as well as a test case for social learning in technology governance. Society is learning about the technology while the technology learns about society. Understanding and governing the politics of this technology means asking 'Who is learning, what are they learning and how are they learning?' Focusing on the successes and failures of social learning around the much-publicized crash of a Tesla Model S in 2016, I argue that trajectories and rhetorics of machine learning in transport pose a substantial governance challenge. 'Self-driving' or 'autonomous' cars are misnamed. As with other technologies, they are shaped by assumptions about social needs, solvable problems, and economic opportunities. Governing these technologies in the public interest means improving social learning by constructively engaging with the contingencies of machine learning.

Training General Aviation Pilots for Convective Weather Situations.

PubMed

Blickensderfer, Elizabeth L; Lanicci, John M; Vincent, Michael J; Thomas, Robert L; Smith, MaryJo; Cruit, Jessica K

2015-10-01

Over the past 10-15 yr, considerable research has occurred for the development, testing, and fielding of real-time Datalink weather products for general aviation (GA) pilots to use before and during flight. As is the case with the implementation of most new technologies, work is needed to ensure that the users (in this case, the pilots) understand both the capabilities and limitations of the new technologies as well as how to use the new systems to improve their task performance. The purpose of this study was to replicate and extend a previous study on training pilots how and when to use these new weather technologies. This field study used a quasi-experimental design (pre- vs. post-test with a control group). There were 91 GA pilots from the Midwest, Northeastern, and Southeastern United States who participated in a 2-h short course or a control activity. The lecture-based short course covered radar basics, Next Generation Weather Radar (NEXRAD), NEXRAD specifics/limitations, thunderstorm basics, radar products, and decision making. The pilots who participated in the course earned higher knowledge test scores, improved at applying the concepts in paper-based flight scenarios, had higher self-efficacy in post-training assessments as compared to pre-training assessments, and also performed better than did control subjects on post-test knowledge and skills assessments. GA pilots lack knowledge about real-time Datalink weather technology. This study indicates that a relatively short training program was effective for fostering Datalink weather-related knowledge and skills in GA pilots.

Boron epoxy rocket motor case program

NASA Technical Reports Server (NTRS)

Stang, D. A.

1971-01-01

Three 28-inch-diameter solid rocket motor cases were fabricated using 1/8 inch wide boron/epoxy tape. The cases had unequal end closures (4-1/8-inch-diameter forward flanges and 13-inch-diameter aft flanges) and metal attachment skirts. The flanges and skirts were titanium 6Al-4V alloy. The original design for the first case was patterned after the requirements of the Applications Technology Satellite apogee kick motor. The second and third cases were designed and fabricated to approximate the requirements of a small Applications Technology Satellite apogee kick motor. The program demonstrated the feasibility of designing and fabricating large-scale filament-wound solid propellant rocket motor cases with boron/epoxy tape.

Fuzzy control of small servo motors

NASA Technical Reports Server (NTRS)

Maor, Ron; Jani, Yashvant

1993-01-01

To explore the benefits of fuzzy logic and understand the differences between the classical control methods and fuzzy control methods, the Togai InfraLogic applications engineering staff developed and implemented a motor control system for small servo motors. The motor assembly for testing the fuzzy and conventional controllers consist of servo motor RA13M and an encoder with a range of 4096 counts. An interface card was designed and fabricated to interface the motor assembly and encoder to an IBM PC. The fuzzy logic based motor controller was developed using the TILShell and Fuzzy C Development System on an IBM PC. A Proportional-Derivative (PD) type conventional controller was also developed and implemented in the IBM PC to compare the performance with the fuzzy controller. Test cases were defined to include step inputs of 90 and 180 degrees rotation, sine and square wave profiles in 5 to 20 hertz frequency range, as well as ramp inputs. In this paper we describe our approach to develop a fuzzy as well as PH controller, provide details of hardware set-up and test cases, and discuss the performance results. In comparison, the fuzzy logic based controller handles the non-linearities of the motor assembly very well and provides excellent control over a broad range of parameters. Fuzzy technology, as indicated by our results, possesses inherent adaptive features.

Technology in Muslim Moral Philosophy.

PubMed

Moosa, Ebrahim

2016-04-01

The article explores the place, role and status of technology in Muslim moral philosophy. Invoking early Muslim encounters with technology the author makes the case why technology is already deeply embedded in contemporary Muslim bioethical thinking. Due to an absence of the philosophical grounding there remains some ambivalence as to why technology is essential to Muslim ethical thinking. Countering the techno-pessimists, the author makes a case in favor of compositional thinking, namely that our thinking itself is altered by our tools and our environment. Compositional thinking opposes the representational mode of thinking that creates a dichotomy between nature versus culture, and technology versus nature. One should, however, anticipate an environment in which technology would be beneficial and not be viewed as potentially harmful.

Bioreactor engineering as an enabling technology to tap biodiversity. The case of taxol.

PubMed

Shuler, M L

1994-11-30

One barrier to exploiting the chemical and genetic diversity in nature is the difficulty of cultivating many organisms in a controlled manner. In some cases it is difficult to achieve growth. In many others, good growth is achieved, but the expression of the organism's genetic potential to make a desired product is not realized. The thesis of this paper is that a coupling of an understanding of reactor engineering principles with the basic knowledge of the biology is often necessary to circumvent these barriers. In many cases the construction of appropriate cultivation systems is a necessary step to better understanding of cellular physiology. In some cases the chemical of interest is of high social utility and comes from a natural source that is uncommon and difficult to secure. In these cases a method of controlled cultivation becomes a prerequisite for commercial exploitation. These points were illustrated using a taxol. Taxol is an important new anticancer drug whose development has been greatly impeded by supply problems. Taxol has been derived from the park of the pacific yew tree, a process that kills the tree. The pacific yew is a relatively uncommon tree and very slow growing. One alternative to the natural source is plant cell culture. Such cultures can produce significant levels of taxol with substantial release into the medium. Taxane products not observed in typical extracts from field-grown plants can be found in cell cultures, indicating the potential unmasking of pathways. These cultures are quite responsive to changes in their environments as illustrated by the summary of initial observations. With regard to natural compounds, biochemical engineers can play a major role in the capture and preservation of producing systems, in the discovery of useful compounds, and in providing the basis for commercial production of natural compounds.

The Ethnic/Racial Variations of Intracerebral Hemorrhage (ERICH) Study Protocol

PubMed Central

Woo, Daniel; Rosand, Jonathan; Kidwell, Chelsea; McCauley, Jacob L.; Osborne, Jennifer; Brown, Mark W.; West, Sandra E.; Rademacher, Eric W.; Waddy, Salina; Roberts, Jamie N.; Koch, Sebastian; Gonzales, Nicole R.; Sung, Gene; Kittner, Steven J.; Birnbaum, Lee; Frankel, Michael; Daniel Testai, Fernando; Hall, Christiana E.; Elkind, Mitchell S. V.; Flaherty, Matthew; Coull, Bruce; Chong, Ji Y.; Warwick, Tanya; Malkoff, Marc; James, Michael L.; Ali, Latisha K.; Worrall, Bradford B.; Jones, Floyd; Watson, Tiffany; Leonard, Anne; Martinez, Rebecca; Sacco, Ralph I; Langefeld, Carl D.

2013-01-01

Background and Purpose Epidemiologic studies of intracerebral hemorrhage (ICH) have consistently demonstrated variation in incidence, location, age at presentation, and outcomes among non-Hispanic white, black, and Hispanic populations. We report here the design and methods for this large, prospective, multi-center case-control study of ICH. Methods The ERICH study is a multi-center, prospective case-control study of ICH. Cases are identified by hot-pursuit and enrolled using standard phenotype and risk factor information and include neuroimaging and blood sample collection. Controls are centrally identified by random digit dialing to match cases by age (+/−5 years), race, ethnicity, gender and metropolitan region. Results As of March 22, 2013, 1,655 cases of ICH had been recruited into the study which is 101.5% of the target for that date and 851 controls had been recruited which is 67.2% of the target for that date (1,267 controls) for a total of 2,506 subjects which is 86.5% of the target for that date (2,897 subjects). Of the 1,655 cases enrolled, 1,640 cases had the case interview entered into the database of which 628 (38%) were non-Hispanic black, 458 (28%) were non-Hispanic white and 554 (34%) were Hispanic. Of the 1,197 cases with imaging submitted, 876 (73.2%) had a 24 hour follow-up CT available In addition to CT imaging, 607 cases have had MRI evaluation. Conclusion The ERICH study is a large, case-control study of ICH with particular emphasis on recruitment of minority populations for the identification of genetic and epidemiologic risk factors for ICH and outcomes after ICH. PMID:24021679

Continuing difficulties in interpreting CNV data: lessons from a genome-wide CNV association study of Australian HNPCC/lynch syndrome patients.

PubMed

Talseth-Palmer, Bente A; Holliday, Elizabeth G; Evans, Tiffany-Jane; McEvoy, Mark; Attia, John; Grice, Desma M; Masson, Amy L; Meldrum, Cliff; Spigelman, Allan; Scott, Rodney J

2013-03-26

Hereditary non-polyposis colorectal cancer (HNPCC)/Lynch syndrome (LS) is a cancer syndrome characterised by early-onset epithelial cancers, especially colorectal cancer (CRC) and endometrial cancer. The aim of the current study was to use SNP-array technology to identify genomic aberrations which could contribute to the increased risk of cancer in HNPCC/LS patients. Individuals diagnosed with HNPCC/LS (100) and healthy controls (384) were genotyped using the Illumina Human610-Quad SNP-arrays. Copy number variation (CNV) calling and association analyses were performed using Nexus software, with significant results validated using QuantiSNP. TaqMan Copy-Number assays were used for verification of CNVs showing significant association with HNPCC/LS identified by both software programs. We detected copy number (CN) gains associated with HNPCC/LS status on chromosome 7q11.21 (28% cases and 0% controls, Nexus; p =3.60E-20 and QuantiSNP; p < 1.00E-16) and 16p11.2 (46% in cases, while a CN loss was observed in 23% of controls, Nexus; p = 4.93E-21 and QuantiSNP; p = 5.00E-06) via in silico analyses. TaqMan Copy-Number assay was used for validation of CNVs showing significant association with HNPCC/LS. In addition, CNV burden (total CNV length, average CNV length and number of observed CNV events) was significantly greater in cases compared to controls. A greater CNV burden was identified in HNPCC/LS cases compared to controls supporting the notion of higher genomic instability in these patients. One intergenic locus on chromosome 7q11.21 is possibly associated with HNPCC/LS and deserves further investigation. The results from this study highlight the complexities of fluorescent based CNV analyses. The inefficiency of both CNV detection methods to reproducibly detect observed CNVs demonstrates the need for sequence data to be considered alongside intensity data to avoid false positive results.

Early detection and response for measles and rubella cases through the (Nursery) School Absenteeism Surveillance System in Ibaraki Prefecture.

PubMed

Watanabe, Miki; Kurita, Junko; Takagi, Takeshi; Nagata, Noriko; Nagasu, Natsuki; Sugawara, Tamie; Ohkusa, Yasushi

2016-01-01

Objectives In Ibaraki Prefecture, all (nursery) schools have joined the (Nursery) School Absenteeism Surveillance System (hereafter denoted as (N)SASSy), which is operated by the Japan School Health Association to monitor the prevalence of infectious diseases, the early detection and response for outbreaks, and prevention of large outbreaks. Prefectural government officers also utilize it as a control measure for infectious diseases. In particular, when cases of measles or rubella are registered, (N)SASSy sends e-mails automatically to prefectural government officers to activate control measures. This paper summarizes administrative responses by prefectural government officers for measles or rubella cases using (N)SASSy and discusses the future challenges.Methods We summarized registration, detection, and first response data for measles or rubella cases in (N)SASSy and compared the number of detected and reported cases enforced by the Infectious Diseases Control Law from January 1, 2013 to December 31, 2014.Results The public health center questioned hospitals/clinics and (nursery) schools about all registered measles or rubella cases in (N)SASSy on the same day to check the entered information. In the past 2 years, there were 5 measles and 56 rubella cases in 2013 and 1 measles and 19 rubella cases in 2014 registered with (N)SASSy. All cases were checked and investigated by the public health center. Of all cases detected by (N)SASSy, 7 rubella cases in 2013 and 1 rubella case in 2014 were reported based on the law. No measles cases were reported in the 2 years. The results of investigations and laboratory tests were given as feedback to the (nursery) schools. If the case did not case definition determined by the law, we changed the status in (N)SASSy to suspected or discarded cases.Conclusion Since (N)SASSy assists prefectural government officers with earlier detection of and response for infectious diseases, it definitely contributes to infection control. Immediate feedback of the laboratory test results to the (nursery) schools was also useful to confirm cases of measles or rubella. As data entry in (nursery) schools is needed for stable operation and utilization of (N)SASSy, it is important that workshops for (N)SASSy are held for (nursery) school teachers every year to maintain accuracy. Our future challenges include the coordination among (nursery) schools, hospitals/clinics, and prefectural government and their applications for infection control.

Case-Control Studies of Sporadic Enteric Infections: A Review and Discussion of Studies Conducted Internationally from 1990 to 2009

PubMed Central

Fullerton, Kathleen E.; Scallan, Elaine; Kirk, Martyn D.; Mahon, Barbara E.; Angulo, Frederick J.; de Valk, Henriette; van Pelt, Wilfrid; Gauci, Charmaine; Hauri, Anja M.; Majowicz, Shannon; O’Brien, Sarah J.

2015-01-01

Epidemiologists have used case-control studies to investigate enteric disease outbreaks for many decades. Increasingly, case-control studies are also used to investigate risk factors for sporadic (not outbreak-associated) disease. While the same basic approach is used, there are important differences between outbreak and sporadic disease settings that need to be considered in the design and implementation of the case-control study for sporadic disease. Through the International Collaboration on Enteric Disease “Burden of Illness” Studies (the International Collaboration), we reviewed 79 case-control studies of sporadic enteric infections caused by nine pathogens that were conducted in 22 countries and published from 1990 through to 2009. We highlight important methodological and study design issues (including case definition, control selection, and exposure assessment) and discuss how approaches to the study of sporadic enteric disease have changed over the last 20 years (e.g., making use of more sensitive case definitions, databases of controls, and computer-assisted interviewing). As our understanding of sporadic enteric infections grows, methods and topics for case-control studies are expected to continue to evolve; for example, advances in understanding of the role of immunity can be used to improve control selection, the apparent protective effects of certain foods can be further explored, and case-control studies can be used to provide population-based measures of the burden of disease. PMID:22443481

Electronic-projecting Moire method applying CBR-technology

NASA Astrophysics Data System (ADS)

Kuzyakov, O. N.; Lapteva, U. V.; Andreeva, M. A.

2018-01-01

Electronic-projecting method based on Moire effect for examining surface topology is suggested. Conditions of forming Moire fringes and their parameters’ dependence on reference parameters of object and virtual grids are analyzed. Control system structure and decision-making subsystem are elaborated. Subsystem execution includes CBR-technology, based on applying case base. The approach related to analysing and forming decision for each separate local area with consequent formation of common topology map is applied.

Research on the development of green chemistry technology assessment techniques: a material reutilization case.

PubMed

Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

2015-01-01

This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

Using the Quadruple Aim Framework to Measure Impact of Heath Technology Implementation: A Case Study of eConsult.

PubMed

Liddy, Clare; Keely, Erin

2018-01-01

Health technology solutions are too often implemented without a true understanding of the system-level problem they seek to address, resulting in excessive costs, poor adoption, ineffectiveness, and ultimately failure. Before implementing or adopting health care innovations, stakeholders should complete a thorough assessment to ensure effectiveness and value. In this article, we describe how to evaluate the impact of a health technology innovation through the 4 dimensions of care outlined by the Quadruple Aim Framework, using our experience with the Champlain Building Access to Specialists through eConsultation (BASE) eConsult service as a case example. A descriptive overview of data was collected between April 1, 2011, and August 31, 2017, using 4 dimensions of care outlined by the Quadruple Aim Framework: patient experience, provider experience, costs, and population health. Findings were drawn from use data, primary care provider closeout surveys, surveys/interviews with patients and provider, and costing data. Overall, patients have received access to specialist advice within days and find the advice useful in 86% of cases. Provider experience is very positive, with satisfaction ratings of high/very high value in 94% of cases. The service cost a weighted average of $47.35/case, compared with $133.60/case for traditional referrals. In total, 1,299 primary care providers have enrolled in the service, completing 28,838 cases since 2011. Monthly case volumes have grown from an average of 13 cases/month in 2011 to 969 cases/month in 2016. The eConsult service has been widely adopted in our region and is currently expanding to new jurisdictions across Canada. However, although we successfully demonstrated eConsult's impact on patient experience, provider satisfaction, and reducing costs, we met several challenges in evaluating its impact on population health. More work is needed to evaluate eConsult's impact on key population health metrics (eg, mortality, morbidity, and system use). Efforts to conduct such evaluations are underway. © Copyright 2018 by the American Board of Family Medicine.

Methodology of Dynamic Monitoring of Structures in the Vicinity of Hydrotechnical Works - Selected Case Studies

NASA Astrophysics Data System (ADS)

Wyjadłowski, Marek

2017-12-01

The constant development of geotechnical technologies imposes the necessity of monitoring techniques to provide a proper quality and the safe execution of geotechnical works. Several monitoring methods enable the preliminary design of work process and current control of hydrotechnical works (pile driving, sheet piling, ground improvement methods). Wave parameter measurements and/or continuous histogram recording of shocks and vibrations and its dynamic impact on engineering structures in the close vicinity of the building site enable the modification of the technology parameters, such as vibrator frequency or hammer drop height. Many examples of practical applications have already been published and provide a basis for the formulation of guidelines, for work on the following sites. In the current work the author's experience gained during sheet piling works for the reconstruction of City Channel in Wrocław (Poland) was presented. The examples chosen describe ways of proceedings in the case of new and old residential buildings where the concrete or masonry walls were exposed to vibrations and in the case of the hydrotechnical structures (sluices, bridges).

Mobile phones improve case detection and management of malaria in rural Bangladesh

PubMed Central

2013-01-01

Background The recent introduction of mobile phones into the rural Bandarban district of Bangladesh provided a resource to improve case detection and treatment of patients with malaria. Methods During studies to define the epidemiology of malaria in villages in south-eastern Bangladesh, an area with hypoendemic malaria, the project recorded 986 mobile phone calls from families because of illness suspected to be malaria between June 2010 and June 2012. Results Based on phone calls, field workers visited the homes with ill persons, and collected blood samples for malaria on 1,046 people. 265 (25%) of the patients tested were positive for malaria. Of the 509 symptomatic malaria cases diagnosed during this study period, 265 (52%) were detected because of an initial mobile phone call. Conclusion Mobile phone technology was found to be an efficient and effective method for rapidly detecting and treating patients with malaria in this remote area. This technology, when combined with local knowledge and field support, may be applicable to other hard-to-reach areas to improve malaria control. PMID:23374585

Detection of EML4-ALK fusion gene in Chinese non-small cell lung cancer by using a sensitive quantitative real-time reverse transcriptase PCR technique.

PubMed

Fu, Sha; Wang, Fang; Shao, Qiong; Zhang, Xu; Duan, Li-Ping; Zhang, Xiao; Zhang, Li; Shao, Jian-Yong

2015-04-01

Anaplastic lymphoma kinase (ALK) rearrangement is present in approximately 5% of lung adenocarcinoma. Clinical trials on ALK inhibitor phase I to III have shown an interesting disease control rate and acceptable tolerability in ALK rearrangement patients. In clinical application, the precise diagnostic strategy for identifying ALK rearrangements remains to be determined. In this study, ALK rearrangement was screened by using quantitative real-time reverse transcriptase polymerase chain reaction (qRT-PCR), direct sequencing, 2 fluorescence in situ hybridization (FISH) assays, and immunohistochemistry in 173 lung adenocarcinomas. We identified 18 cases (10.4%) with EML4-ALK fusion-positive by qRT-PCR, and all were positive for EML4-ALK fusion gene validated by direct sequencing. The result was consistent with that of other methods. Furthermore, of the 18 EML4-ALK fusion-positive cases, 16 (9.2%) were positive by using EML4-ALK fusion probe FISH, and 15 (8.7%) were positive by using ALK break-apart probe FISH and immunohistochemistry staining. Of the 18 ALK fusion-positive lung adenocarcinomas, 8 cases (44.4%) were histologically diagnosed as subtypes of cribriform adenocarcinoma, 7 cases (38.9%) as cribriform adenocarcinoma mixed with papillary and/or mucinous pattern, 2 cases (11.1%) as papillary adenocarcinoma, and 1 case (5.6%) as mucinous adenocarcinoma. In the present study, the ALK rearrangement frequency detected by qRT-PCR in Chinese NSCLC patients was higher than that in the western populations. QRT-PCR is a rapid, sensitive technology that could be used as a screening tool for identifying EML4-ALK fusion-positive NSCLC patients who would be sensitive for receiving ALK inhibitor therapy.

Novel application of three-dimensional technologies in a case of dismemberment.

PubMed

Baier, Waltraud; Norman, Danielle G; Warnett, Jason M; Payne, Mark; Harrison, Nigel P; Hunt, Nicholas C A; Burnett, Brian A; Williams, Mark A

2017-01-01

This case study reports the novel application of three-dimensional technologies such as micro-CT and 3D printing to the forensic investigation of a complex case of dismemberment. Micro-CT was successfully employed to virtually align severed skeletal elements found in different locations, analyse tool marks created during the dismemberment process, and virtually dissect a charred piece of evidence. High resolution 3D prints of the burnt human bone contained within were created for physical visualisation to assist the investigation team. Micro-CT as a forensic radiological method provided vital information and the basis for visualisation both during the investigation and in the subsequent trial making it one of the first examples of such technology in a UK court. Copyright © 2016. Published by Elsevier B.V.

Roles of airships in economic development

NASA Technical Reports Server (NTRS)

Beier, G. J.; Hidalgo, G. C.

1975-01-01

It is proposed that airships of known and tested technology could, in some cases, perform routine transport missions more economically than conventional transport modes. If infrastructure for direct surface transport is already in place or if such infrastructure can be justified by the size of the market and there are no unusual impediments to constructing it, then the airships of tested technology cannot normally compete. If, however, the surface routes would be unusually expensive or circuitous, or if they involve several transhipments, or if the market size is too small to spread infrastructure costs of conventional transport, the airships of tested technology present a workable alternative. A series of special cases are considered. The cases, though unusual, are not unique; there are several similar possible applications which, in total, would provide a reasonably large market for airships.

Factors related to the implementation and diffusion of new technologies: a pilot study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

Unconditional or Conditional Logistic Regression Model for Age-Matched Case-Control Data?

PubMed

Kuo, Chia-Ling; Duan, Yinghui; Grady, James

2018-01-01

Matching on demographic variables is commonly used in case-control studies to adjust for confounding at the design stage. There is a presumption that matched data need to be analyzed by matched methods. Conditional logistic regression has become a standard for matched case-control data to tackle the sparse data problem. The sparse data problem, however, may not be a concern for loose-matching data when the matching between cases and controls is not unique, and one case can be matched to other controls without substantially changing the association. Data matched on a few demographic variables are clearly loose-matching data, and we hypothesize that unconditional logistic regression is a proper method to perform. To address the hypothesis, we compare unconditional and conditional logistic regression models by precision in estimates and hypothesis testing using simulated matched case-control data. Our results support our hypothesis; however, the unconditional model is not as robust as the conditional model to the matching distortion that the matching process not only makes cases and controls similar for matching variables but also for the exposure status. When the study design involves other complex features or the computational burden is high, matching in loose-matching data can be ignored for negligible loss in testing and estimation if the distributions of matching variables are not extremely different between cases and controls.

Trends in Process Analytical Technology: Present State in Bioprocessing.

PubMed

Jenzsch, Marco; Bell, Christian; Buziol, Stefan; Kepert, Felix; Wegele, Harald; Hakemeyer, Christian

2017-08-04

Process analytical technology (PAT), the regulatory initiative for incorporating quality in pharmaceutical manufacturing, is an area of intense research and interest. If PAT is effectively applied to bioprocesses, this can increase process understanding and control, and mitigate the risk from substandard drug products to both manufacturer and patient. To optimize the benefits of PAT, the entire PAT framework must be considered and each elements of PAT must be carefully selected, including sensor and analytical technology, data analysis techniques, control strategies and algorithms, and process optimization routines. This chapter discusses the current state of PAT in the biopharmaceutical industry, including several case studies demonstrating the degree of maturity of various PAT tools. Graphical Abstract Hierarchy of QbD components.

Biofiltration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pisotti, D.A.

1995-12-31

In Europe, biofiltration has been a widely used air pollution control technology for over 25 years with much success. Within the last 5 years, biofiltration has taken on the US air pollution control market with the same success. This talk will discuss biofiltrations applications and the various types of biofilter systems currently being used. As with any technology, there are advantages and disadvantages associated with each type of system. Because it is a relatively new technology in the US, there are many different types of systems currently being offered. This talk will cover the different types of system approaches, theirmore » advantages, disadvantages, and their associated costs. It will also illustrate a biofilters effectiveness using a case study and its results.« less

Technology and Multiculturalism in the Classroom: Case Studies in Attitudes and Motivations.

ERIC Educational Resources Information Center

Chisholm, Ines Marquez; Wetzel, Keith

2001-01-01

Uses a case study approach in examining the attitudes and motivations of five teacher educators who used technology in their classroom. Identifies and discusses six common elements of multicultural technology integration and concludes with a general discussion on the need to combine pedagogical methods with a practical vision of technology use and…

The Convergence of Content, Pedagogy, and Technology in Online Professional Development for Teachers of German: An Intrinsic Case Study

ERIC Educational Resources Information Center

Bustamante, Carolina; Moeller, Aleidine J.

2013-01-01

This qualitative case study describes a unique online professional development program utilizing Web 2.0 technologies for teachers of German using the Technological Pedagogical Content Knowledge (TPACK) model as a theoretical framework to promote technology literacy, expand German language proficiency and cultural knowledge, and integrate…

Combining Google Earth and GIS mapping technologies in a dengue surveillance system for developing countries

PubMed Central

Chang, Aileen Y; Parrales, Maria E; Jimenez, Javier; Sobieszczyk, Magdalena E; Hammer, Scott M; Copenhaver, David J; Kulkarni, Rajan P

2009-01-01

Background Dengue fever is a mosquito-borne illness that places significant burden on tropical developing countries with unplanned urbanization. A surveillance system using Google Earth and GIS mapping technologies was developed in Nicaragua as a management tool. Methods and Results Satellite imagery of the town of Bluefields, Nicaragua captured from Google Earth was used to create a base-map in ArcGIS 9. Indices of larval infestation, locations of tire dumps, cemeteries, large areas of standing water, etc. that may act as larval development sites, and locations of the homes of dengue cases collected during routine epidemiologic surveying were overlaid onto this map. Visual imagery of the location of dengue cases, larval infestation, and locations of potential larval development sites were used by dengue control specialists to prioritize specific neighborhoods for targeted control interventions. Conclusion This dengue surveillance program allows public health workers in resource-limited settings to accurately identify areas with high indices of mosquito infestation and interpret the spatial relationship of these areas with potential larval development sites such as garbage piles and large pools of standing water. As a result, it is possible to prioritize control strategies and to target interventions to highest risk areas in order to eliminate the likely origin of the mosquito vector. This program is well-suited for resource-limited settings since it utilizes readily available technologies that do not rely on Internet access for daily use and can easily be implemented in many developing countries for very little cost. PMID:19627614

Readings in technology assessment. [in relation to social impact and the law

NASA Technical Reports Server (NTRS)

1975-01-01

Papers are presented which reflect research in the following areas: development of the concept of technology assessment; institutionalization of technology assessment; the interface between law and technology assessment; and assessment case studies. Case studies include hazards of the medical use of X-rays, environmental noise effects in transportation planning, genetic technology, impact of underground coal mining, and aircraft/airport noise abatement.

40 CFR 63.56 - Requirements for case-by-case determination of equivalent emission limitations after promulgation...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 63.56 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... Technology Determinations for Major Sources in Accordance With Clean Air Act Sections, Sections 112(g) and...

Decreased hospital length of stay associated with presentation of cases at morning report with librarian support

PubMed Central

Banks, Daniel E.; Shi, Runhua; Timm, Donna F.; Christopher, Kerri Ann; Duggar, David Charles; Comegys, Marianne; McLarty, Jerry

2007-01-01

Objective: The research sought to determine whether case discussion at residents' morning report (MR), accompanied by a computerized literature search and librarian support, affects hospital charges, length of stay (LOS), and thirty-day readmission rate. Methods: This case-control study, conducted from August 2004 to March 2005, compared outcomes for 105 cases presented at MR within 24 hours of admission to 19,210 potential matches, including cases presented at MR and cases not presented at MR. With matching criteria of patient age (± 5 years), identical primary diagnosis, and secondary diagnoses (within 3 additional diagnoses) using International Classification of Diseases (ICD-9) codes, 55 cases were matched to 136 controls. Statistical analyses included Student's t tests, chi-squared tests, and nonparametric methods. Results: LOS differed significantly between matched MR cases and controls (3 days vs. 5 days, P < 0.024). Median total hospital charges were $7,045 for the MR group and $10,663 for the control group. There was no difference in 30-day readmission rate between the 2 groups. Discussion/Conclusion: Presentation of a case at MR, followed by the timely dissemination of the results of an online literature review, resulted in a shortened LOS and lower hospital charges compared with controls. MR, in association with a computerized literature search guided by the librarians, was an effective means for introducing evidence-based medicine into patient care practices. PMID:17971885

Video Cases. [SITE 2002 Section].

ERIC Educational Resources Information Center

Talley, Sue, Ed.

This document contains the following papers on video case studies from the SITE (Society for Information Technology & Teacher Education) 2002 conference: (1) "Developing Digital Video Resources To Improve Teaching with Technology: The PT3--'Best Practices' Project"; (2) "Portraits of Three Schools from the U.S.A. Exemplary Technology-Supported…

The Distinction Between Curative and Assistive Technology.

PubMed

Stramondo, Joseph A

2018-05-01

Disability activists have sometimes claimed their disability has actually increased their well-being. Some even say they would reject a cure to keep these gains. Yet, these same activists often simultaneously propose improvements to the quality and accessibility of assistive technology. However, for any argument favoring assistive over curative technology (or vice versa) to work, there must be a coherent distinction between the two. This line is already vague and will become even less clear with the emergence of novel technologies. This paper asks and tries to answer the question: what is it about the paradigmatic examples of curative and assistive technologies that make them paradigmatic and how can these defining features help us clarify the hard cases? This analysis will begin with an argument that, while the common views of this distinction adequately explain the paradigmatic cases, they fail to accurately pick out the relevant features of those technologies that make them paradigmatic and to provide adequate guidance for parsing the hard cases. Instead, it will be claimed that these categories of curative or assistive technologies are defined by the role the technologies play in establishing a person's relational narrative identity as a member of one of two social groups: disabled people or non-disabled people.

Toward Understanding the Role of Web 2.0 Technology in Self-Directed Learning and Job Performance in a Single Organizational Setting: A Qualitative Case Study

ERIC Educational Resources Information Center

Caruso, Shirley J.

2016-01-01

This single instrumental qualitative case study explores and thickly describes job performance outcomes based upon the manner in which self-directed learning activities of a purposefully selected sample of 3 construction managers are conducted, mediated by the use of Web 2.0 technology. The data collected revealed that construction managers are…

A Case Study of the Integration of Information and Communication Technology in a Northern Ontario First Nation Community High School: Challenges and Benefits

ERIC Educational Resources Information Center

Laronde, Gerald; MacLeod, Katarin; Frost, Lorraine; Waller, Ken

2017-01-01

A case study approach was used in examining Information and Communication Technology (ICT) use within a small First Nation high school in Northern Ontario. Quantitative and qualitative data was gathered from students, teacher, and the administrator, who participated in an online survey, followed by interviews on their use of ICT in education. How…

Teaching Faculty How To Use Technology: Best Practices from Leading Institutions. American Council on Education/Oryx Press Series on Higher Education.

ERIC Educational Resources Information Center

Epper, Rhonda M., Ed.; Bates, A. W., Ed.

The case studies and analyses in this book address the ways in which higher education institutions are responding to the growing demand for faculty support in the use of technology. Cases were selected from more than 100 institutions that participated in a study by the State Higher Education Executive Officers and the American Productivity &…

Design of a switch matrix gate/bulk driver controller for thin film lithium microbatteries using microwave SOI technology

NASA Technical Reports Server (NTRS)

Whitacre, J.; West, W. C.; Mojarradi, M.; Sukumar, V.; Hess, H.; Li, H.; Buck, K.; Cox, D.; Alahmad, M.; Zghoul, F. N.;

Global positioning system & Google Earth in the investigation of an outbreak of cholera in a village of Bengaluru Urban district, Karnataka.

PubMed

Masthi, N R Ramesh; Madhusudan, M; Puthussery, Yannick P

2015-11-01

The global positioning system (GPS) technology along with Google Earth is used to measure (spatial map) the accurate distribution of morbidity, mortality and planning of interventions in the community. We used this technology to find out its role in the investigation of a cholera outbreak, and also to identify the cause of the outbreak. This study was conducted in a village near Bengaluru, Karnataka in June 2013 during a cholera outbreak. House-to-house survey was done to identify acute watery diarrhoea cases. A hand held GPS receiver was used to record north and east coordinates of the households of cases and these values were subsequently plotted on Google Earth map. Water samples were collected from suspected sources for microbiological analysis. A total of 27 cases of acute watery diarrhoea were reported. Fifty per cent of cases were in the age group of 14-44 yr and one death was reported. GPS technology and Google Earth described the accurate location of household of cases and spot map generated showed clustering of cases around the suspected water sources. The attack rate was 6.92 per cent and case fatality rate was 3.7 per cent. Water samples collected from suspected sources showed the presence of Vibrio cholera O1 Ogawa. GPS technology and Google Earth were easy to use, helpful to accurately pinpoint the location of household of cases, construction of spot map and follow up of cases. Outbreak was found to be due to contamination of drinking water sources.

A Case Study of Best Practices of Implementing a One-to-One Technology Program

ERIC Educational Resources Information Center

Ackley, Stacy

2017-01-01

The purpose of this case study was to describe the experiences of rural school district leaders who implemented and have sustained a one-to-one technology program at the secondary level so to provide school districts considering one-to-one implementation knowledge of best practices. This study was a qualitative, bounded case study that used a…

Wisconsin District Case Study. A Report and Estimating Tool for K-12 School Districts

ERIC Educational Resources Information Center

Consortium for School Networking, 2004

2004-01-01

The Wisconsin case study school district is primarily urban and growing with 21,500 students on 40 campuses. This document contains case studies that are presented in the same format at the 2003 studies, but also have a focus on additional technologies beyond the base distributed computing model. These new technologies are voice/data integration,…

Designing Optical Spreadsheets-Technological Pedagogical Content Knowledge Simulation (S-TPACK): A Case Study of Pre-Service Teachers Course

ERIC Educational Resources Information Center

Thohir, M. Anas

2018-01-01

In the 21st century, the competence of instructional technological design is important for pre-service physics teachers. This case study described the pre-service physics teachers' design of optical spreadsheet simulation and evaluated teaching and learning the task in the classroom. The case study chose three of thirty pre-service teacher's…

Patient-Driven Innovation for Mobile Mental Health Technology: Case Report of Symptom Tracking in Schizophrenia.

PubMed

Torous, John; Roux, Spencer

2017-07-06

This patient perspective piece presents an important case at the intersection of mobile health technology, mental health, and innovation. The potential of digital technologies to advance mental health is well known, although the challenges are being increasingly recognized. Making mobile health work for mental health will require broad collaborations. We already know that those who experience mental illness are excited by the potential technology, with many actively engaged in research, fundraising, advocacy, and entrepreneurial ventures. But we don't always hear their voice as often as others. There is a clear advantage for their voice to be heard: so we can all learn from their experiences at the direct intersection of mental health and technology innovation. The case is cowritten with an individual with schizophrenia, who openly shares his name and personal experience with mental health technology in order to educate and inspire others. This paper is the first in JMIR Mental Health's patient perspective series, and we welcome future contributions from those with lived experience. ©John Torous, Spencer Roux. Originally published in JMIR Mental Health (http://mental.jmir.org), 06.07.2017.

An evaluation of the effectiveness of FreshCase technology to extend the storage life of whole muscle beef and ground beef.

PubMed

Yang, X; Woerner, D R; Hasty, J D; McCullough, K R; Geornaras, I; Sofos, J N; Belk, K E

2016-11-01

The objective of this study was to identify the maximum time of refrigerated storage before aerobic psychrotrophic bacteria (APB) grew to a level indicative of spoilage (7 log cfu/g) or other indicators of spoilage were observed for whole muscle beef and ground beef packaged using FreshCase technology. Storage life for beef steaks stored in FreshCase packages at 4°C was 36 d, with ground beef stored in FreshCase packages at 4°C lasting 10 d. Additionally, greater ( < 0.05) a* (redness) values were detected in FreshCase packaged samples of both beef steaks and ground beef over storage time. At the point of spoilage, off-odors were detected at very low levels in all samples along with low thiobarbituric acid values (< 2 mg malonaldehyde/kg). Therefore, use of FreshCase technology in whole muscle beef and ground beef is a viable option to extend storage life.

[Evaluation of the effect of varicella outbreak control measures through a discrete time delay SEIR model].

PubMed

Pan, Jin-ren; Huang, Zheng-qiang; Chen, Kun

2012-04-01

forecast the epidemic trend and to evaluate the effect of outbreak control measures by investigation of a varicella outbreak event with a discrete time delay SEIR model. A discrete time delay model was formulated by discretization method based on a continuous SEIR model with the consideration of the time delay effect on latent period and communicable period. The epidemic trend forecast was carried out based on the number of expected cases. The theoretical effect evaluation was assessed by comparing the results from different emergency control measures. Without any control measures, the theoretical attack rate was 30.16% (504/1671). The course of the epidemic lasted for 4 months and the peak epidemic time was 78 days after the onset of the first case. 'Generation' phenomenon had been observed in the course of the epidemic with the interval of two weeks. The actual number of cases was decreased by 89.48% (451/504) compared with the number of expected cases under no control measure scenario. With the rigorous quarantine measure for all cases on their onset day, when the measure was conducted on 0, 14, 28, 42 days after the onset of the first case, the total numbers of expected cases were 22, 59, 127 and 220 respectively. With the quarantine measure conducted on 14 days after the onset of the first case, when the proportion of quarantine was 30%, 50%, 70%, 90%, the total number of expected cases were 485, 457, 386 and 169, respectively. With the emergent vaccination for all persons, when the measure was conducted on 0, 14, 28, 42 days after the onset of the first case, the total numbers of expected cases were 7, 26, 81 and 202 respectively. With the emergent vaccination conducted on 14 days after the onset of the first case, when the immunization coverage rate was 30%, 50%, 70%, 90%, the total numbers of expected cases were 354, 246, 127 and 40, respectively. The number of expected cases can be regarded as the reference to evaluate the effect of control measures. The simulation results suggest that it will get more benefits to conduct control measures earlier in varicella outbreak events, and the effect of emergent vaccination is better than that of quarantine measure under the same conditions.

From translational research to open technology innovation systems.

PubMed

Savory, Clive; Fortune, Joyce

2015-01-01

The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

When the user is not the chooser: learning from stakeholder involvement in technology adoption decisions in infection control.

PubMed

Ahmad, R; Kyratsis, Y; Holmes, A

2012-07-01

Health systems need efficient and effective innovation decisions to provide maximum benefit to patients, particularly in a climate of financial constraints. Although evidence-based innovations exist for helping to address healthcare-associated infections, the uptake and implementation of these is highly variable and in some cases very slow. To investigate innovation adoption decisions and implementation processes from an organizational perspective, focusing on the implications of stakeholder involvement during the innovation process. Thirty-eight technology adoption decisions and implementation processes were examined through 121 qualitative interviews in 12 National Health Service healthcare organizations across England. Stakeholder involvement varied across organizations with decisions highly exclusive to the infection prevention and control (IPC) team, to highly inclusive of wider organizational members. The context, including organizational culture, previous experience, and logistical factors influenced the level of stakeholder engagement. The timing of stakeholder involvement in the process impacted on: (i) the range of innovations considered; (ii) the technologies selected, and (iii) the success of technology implementation. Cases of non-adoption, discontinued adoption, and of successful implementation are presented to share learning. The potential benefits of stakeholder involvement for 'successful' innovation adoption are presented including a goal-oriented framework for involvement. Key stakeholder involvement can lead to innovation adoption and implementation compatible with structural and cultural contexts, particularly when involvement crosses the phases of initiation, decision-making and implementation. Involving members of the wider healthcare organization can raise the profile of IPC and reinforce efforts to make IPC everybody's business. Copyright © 2012 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Improvements in the efficiency of turboexpanders in cryogenic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agahi, R.R.; Lin, M.C.; Ershaghi, B.

1996-12-31

Process designers have utilized turboexpanders in cryogenic processes because of their higher thermal efficiencies when compared with conventional refrigeration cycles. Process design and equipment performance have improved substantially through the utilization of modern technologies. Turboexpander manufacturers have also adopted Computational Fluid Dynamic Software, Computer Numerical Control Technology and Holography Techniques to further improve an already impressive turboexpander efficiency performance. In this paper, the authors explain the design process of the turboexpander utilizing modern technology. Two cases of turboexpanders processing helium (4.35{degrees}K) and hydrogen (56{degrees}K) will be presented.

Analyzing the Roles, Activities, and Skills of Learning Technologists: A Case Study from City University London

ERIC Educational Resources Information Center

Fox, Olivia; Sumner, Neal

2014-01-01

This article reports on a case study carried out at City University London into the role of learning technologists. The article examines how the role developed by providing points of comparison with a report on the career development of learning technology staff in UK universities in 2001. This case study identified that learning technologists…

UK Health and Social Care Case Studies: Iterative Technology Development.

PubMed

Blanchard, Adie; Gilbert, Laura; Dawson, Tom

2017-01-01

As a result of increasing demand in the face of reducing resources, technology has been implemented in many social and health care services to improve service efficiency. This paper outlines the experiences of deploying a 'Software as a Service' application in the UK social and health care sectors. The case studies demonstrate that every implementation is different, and unique to each organisation. Technology design and integration can be facilitated by ongoing engagement and collaboration with all stakeholders, flexible design, and attention to interoperability to suit services and their workflows.

Project Career: A qualitative examination of five college students with traumatic brain injuries.

PubMed

Nardone, Amanda; Sampson, Elaine; Stauffer, Callista; Leopold, Anne; Jacobs, Karen; Hendricks, Deborah J; Elias, Eileen; Chen, Hui; Rumrill, Phillip

2015-01-01

Project Career is an interprofessional five-year development project designed to improve the employment success of undergraduate college and university students with traumatic brain injury (TBI). The case study information was collected and synthesized by the project's Technology and Employment Coordinators (TECs) at each of the project's three university sites. The project's evaluation is occurring independently through JBS International, Inc. Five case studies are presented to provide an understanding of student participants' experiences within Project Career. Each case study includes background on the student, engagement with technology, vocational supports, and interactions with his/her respective TEC. A qualitative analysis from the student's case notes is provided within each case study, along with a discussion of the overall qualitative analysis. Across all five students, the theme Positive Outcomes was mentioned most often in the case notes. Of all the different type of challenges, Cognitive Challenges were most often mentioned during meetings with the TECs, followed by Psychological Challenges, Physical Challenges, Other Challenges, and Academic Challenges, respectively. Project Career is providing academic enrichment and career enhancement that may substantially improve the unsatisfactory employment outcomes that presently await students with TBI following graduation.

Human Factors Guidelines for UAS in the National Airspace System

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Shively, R. Jay

2013-01-01

The ground control stations (GCS) of some UAS have been characterized by less-than-adequate human-system interfaces. In some cases this may reflect a failure to apply an existing regulation or human factors standard. In other cases, the problem may indicate a lack of suitable guidance material. NASA is leading a community effort to develop recommendations for human factors guidelines for GCS to support routine beyond-line-of-sight UAS operations in the national airspace system (NAS). In contrast to regulations, guidelines are not mandatory requirements. However, by encapsulating solutions to identified problems or areas of risk, guidelines can provide assistance to system developers, users and regulatory agencies. To be effective, guidelines must be relevant to a wide range of systems, must not be overly prescriptive, and must not impose premature standardization on evolving technologies. By assuming that a pilot will be responsible for each UAS operating in the NAS, and that the aircraft will be required to operate in a manner comparable to conventionally piloted aircraft, it is possible to identify a generic set of pilot tasks and the information, control and communication requirements needed to support these tasks. Areas where guidelines will be useful can then be identified, utilizing information from simulations, operational experience and the human factors literature. In developing guidelines, we recognize that existing regulatory and guidance material will, at times, provide adequate coverage of an area. In other cases suitable guidelines may be found in existing military or industry human factors standards. In cases where appropriate existing standards cannot be identified, original guidelines will be proposed.

Yellow fever from Angola and Congo: a storm gathers.

PubMed

Ahmed, Qanta A; Memish, Ziad A

2017-04-01

In common with Zika, Chikungunya and Dengue, Yellow Fever (YF) is an arthropod-borne flavivirus. It is transmitted between humans and from monkeys by mosquitoes of the Aedes aegypti (its principal vector), haemogogus and albopictus varieties. Three cycles of transmission may occur: urban; sylvatic; and intermediate. Recently, sub-Saharan Africa has seen the resurgence of this neglected disease. The current YF outbreak in Angola began in December 2015 in the capital Luanda and by October 2016 there had been > 4300 suspected cases, with 376 deaths (case fatality rate = 8.8%). A total of 884 were laboratory confirmed but it is likely that case numbers may be seriously underestimated. YF has subsequently quickly spread to neighbouring Congo and further afield to Kenya and also China, this being of grave concern as this was a first introduction of YF to Asia. YF has recently hit Brazil, with 555 suspected cases and 107 deaths reported by the end of January 2017. Extremely rapid unplanned urban migration in Africa by non-immune rural populations to already densely populated cities, where high densities of mosquitoes co-exist with city dwellers in makeshift flimsy accommodation, poses a ready recipe for an epidemic of massive proportion. In such conditions, with enormously strained public services existing among the most needy and vulnerable populations, mosquito control programmes are nearly impossible. YF in Congo is a tempest barely restrained. However, it is one that can be controlled by focused and committed international collaboration, by intense and united political will and by the marriage of old and trusted techniques: a vaccine almost a century old and some of the most modern technologies available to man.

Technology Creep and the Arms Race: ICBM Problem a Sleeper.

PubMed

Shapley, D

1978-09-22

In three articles, Science will discuss how the creep of technology affects the arms race. The first two articles will deal with the most important current example: first, how ICBM modernization is giving both sides a destabilizing, first-strike capability, and second, how arms control seems to be dealing inadequately with this pressing problem. The third article will describe other cases of incremental technical improvements affecting arms control, such as antisatellite research and ballistic missile defense research, which are bringing both sides closer to the antiballistic missile capability they forswore in a 1972 treaty.

Combining epidemiology and biomechanics in sports injury prevention research: a new approach for selecting suitable controls.

PubMed

Finch, Caroline F; Ullah, Shahid; McIntosh, Andrew S

2011-01-01

Several important methodological issues need to be considered when designing sports injury case-control studies. Major design goals for case-control studies include the accounting for prior injury risk exposure, and optimal definitions of both cases and suitable controls are needed to ensure this. This article reviews methodological aspects of published sports injury case-control studies, particularly with regard to the selection of controls. It argues for a new approach towards selecting controls for case-control studies that draws on an interface between epidemiological and biomechanical concepts. A review was conducted to identify sport injury case-control studies published in the peer-review literature during 1985-2008. Overall, 32 articles were identified, of which the majority related to upper or lower extremity injuries. Matching considerations were used for control selection in 16 studies. Specific mention of application of biomechanical principles in the selection of appropriate controls was absent from all studies, including those purporting to evaluate the benefits of personal protective equipment to protect against impact injury. This is a problem because it could lead to biased conclusions, as cases and controls are not fully comparable in terms of similar biomechanical impact profiles relating to the injury incident, such as site of the impact on the body. The strength of the conclusions drawn from case-control studies, and the extent to which results can be generalized, is directly influenced by the definition and recruitment of cases and appropriate controls. Future studies should consider the interface between epidemiological and biomechanical concepts when choosing appropriate controls to ensure that proper adjustment of prior exposure to injury risk is made. To provide necessary guidance for the optimal selection of controls in case-control studies of interventions to prevent sports-related impact injury, this review outlines a new case-control selection strategy that reflects the importance of biomechanical considerations, which ensures that controls are selected based on the presence of the same global injury mechanism as the cases. To summarize, the general biomechanical principles that should apply to the selection of controls in future case-control studies are as follows: (i) each control must have been exposed to the same global injury mechanism as the case, (e.g. head impact, fall onto outstretched arm); and (ii) intrinsic (individual) factors (e.g. age, sex, skill level) that might modify the person's response to the relevant biomechanical loads are adjusted when either selecting the controls or are in the analysis phase. The same considerations for control selection apply to other study designs such as matched cohort studies or case-crossover studies.

Risk of Guillain-Barré syndrome after 2010-2011 influenza vaccination.

PubMed

Galeotti, Francesca; Massari, Marco; D'Alessandro, Roberto; Beghi, Ettore; Chiò, Adriano; Logroscino, Giancarlo; Filippini, Graziella; Benedetti, Maria Donata; Pugliatti, Maura; Santuccio, Carmela; Raschetti, Roberto

2013-05-01

Influenza vaccination has been implicated in Guillain Barré Syndrome (GBS) although the evidence for this link is controversial. A case-control study was conducted between October 2010 and May 2011 in seven Italian Regions to explore the relation between influenza vaccination and GBS. The study included 176 GBS incident cases aged ≥18 years from 86 neurological centers. Controls were selected among patients admitted for acute conditions to the Emergency Department of the same hospital as cases. Each control was matched to a case by sex, age, Region and admission date. Two different analyses were conducted: a matched case-control analysis and a self-controlled case series analysis (SCCS). Case-control analysis included 140 cases matched to 308 controls. The adjusted matched odds ratio (OR) for GBS occurrence within 6 weeks after influenza vaccination was 3.8 (95 % CI: 1.3, 10.5). A much stronger association with gastrointestinal infections (OR = 23.8; 95 % CI 7.3, 77.6) and influenza-like illness or upper respiratory tract infections (OR = 11.5; 95 % CI 5.6, 23.5) was highlighted. The SCCS analysis included all 176 GBS cases. Influenza vaccination was associated with GBS, with a relative risk of 2.1 (95 % CI 1.1, 3.9). According to these results the attributable risk in adults ranges from two to five GBS cases per 1,000,000 vaccinations.

Towards a U.S. Army Officer Corps Strategy for Success: Employing Talent

DTIC Science & Technology

2010-05-01

not share the same information and also have differing interests .10 In this case, commanders (the principals), are charged with leading their...requirements. A carefully controlled talent market driven by a state-of-the-art information technology system can help create employment practices equal to... information in this area. 9 Make no mistake—the Army knows plenty about its officers: their home of record, gender , race, marital status, colleges

The Manned Spacecraft Center and medical technology

NASA Technical Reports Server (NTRS)

Johnston, R. S.; Pool, S. L.

1974-01-01

A number of medically oriented research and hardware development programs in support of manned space flights have been sponsored by NASA. Blood pressure measuring systems for use in spacecraft are considered. In some cases, complete new bioinstrumentation systems were necessary to accomplish a specific physiological study. Plans for medical research during the Skylab program are discussed along with general questions regarding space-borne health service systems and details concerning the Health Services Support Control Center.

[Is a patient's knowledge of cardiovascular risk factors better after the occurrence of a major ischemic event? Survey of 135 cases and 260 controls].

PubMed

Lensel, A-S; Lermusiaux, P; Boileau, C; Feugier, P; Sérusclat, A; Zerbib, Y; Ninet, J

2013-12-01

We hypothezised that patients (cases) who are hospitalized for a major ischemic event--myocardial infarction, stroke, decompensation of peripheral arterial disease--acquire better knowledge than a control population--atheromatous patients without a major ischemic event, patients consulting for a vein disease or a diabetes evaluation, and accompanists--about cardiovascular risk factors (smoking, hypertension, diabetes, dyslipidemia, obesity) and have a better understanding of the usefulness of making changes in their lifestyle (quit smoking, regular exercise, Mediterranean diet, low salt diet, weight control, diabetes care). A questionnaire was proposed at vascular surgery consultations and vascular and cardiac functional explorations, at the M Pavillon of the Édouard-Herriot hospital, Lyon, France. In five months, 395 questionnaires (135 cases and 260 controls) were analyzed. The global knowledge score was statistically higher for cases than for controls (cases 3.23±1.81; controls 2.77±2.03; P=0.037). Cases did not abide by monitoring and dietary rules better, except as regards the management of diabetes. Regular physical activity was statistically more prevalent among controls than among cases. Cases mainly received their information from their doctors (general practitioner for 59% of controls and 78% of cases, cardiologist for 25% of controls and 57% of cases) while controls got their information more through magazines or advertising. Our results show that after a major ischemic event, cases' knowledge of risk factors is better than the rest of the population without improved rules lifestyle changes. This suggests the usefulness of evaluating a therapeutic education program for atheromatous disease. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Case-control vaccine effectiveness studies: Preparation, design, and enrollment of cases and controls.

PubMed

Verani, Jennifer R; Baqui, Abdullah H; Broome, Claire V; Cherian, Thomas; Cohen, Cheryl; Farrar, Jennifer L; Feikin, Daniel R; Groome, Michelle J; Hajjeh, Rana A; Johnson, Hope L; Madhi, Shabir A; Mulholland, Kim; O'Brien, Katherine L; Parashar, Umesh D; Patel, Manish M; Rodrigues, Laura C; Santosham, Mathuram; Scott, J Anthony; Smith, Peter G; Sommerfelt, Halvor; Tate, Jacqueline E; Victor, J Chris; Whitney, Cynthia G; Zaidi, Anita K; Zell, Elizabeth R

2017-06-05

Case-control studies are commonly used to evaluate effectiveness of licensed vaccines after deployment in public health programs. Such studies can provide policy-relevant data on vaccine performance under 'real world' conditions, contributing to the evidence base to support and sustain introduction of new vaccines. However, case-control studies do not measure the impact of vaccine introduction on disease at a population level, and are subject to bias and confounding, which may lead to inaccurate results that can misinform policy decisions. In 2012, a group of experts met to review recent experience with case-control studies evaluating the effectiveness of several vaccines; here we summarize the recommendations of that group regarding best practices for planning, design and enrollment of cases and controls. Rigorous planning and preparation should focus on understanding the study context including healthcare-seeking and vaccination practices. Case-control vaccine effectiveness studies are best carried out soon after vaccine introduction because high coverage creates strong potential for confounding. Endpoints specific to the vaccine target are preferable to non-specific clinical syndromes since the proportion of non-specific outcomes preventable through vaccination may vary over time and place, leading to potentially confusing results. Controls should be representative of the source population from which cases arise, and are generally recruited from the community or health facilities where cases are enrolled. Matching of controls to cases for potential confounding factors is commonly used, although should be reserved for a limited number of key variables believed to be linked to both vaccination and disease. Case-control vaccine effectiveness studies can provide information useful to guide policy decisions and vaccine development, however rigorous preparation and design is essential. Published by Elsevier Ltd.

Toward mHealth Brief Contact Interventions in Suicide Prevention: Case Series From the Suicide Intervention Assisted by Messages (SIAM) Randomized Controlled Trial.

PubMed

Berrouiguet, Sofian; Larsen, Mark Erik; Mesmeur, Catherine; Gravey, Michel; Billot, Romain; Walter, Michel; Lemey, Christophe; Lenca, Philippe

2018-01-10

Research indicates that maintaining contact either via letter or postcard with at-risk adults following discharge from care services after a suicide attempt (SA) can reduce reattempt risk. Pilot studies have demonstrated that interventions using mobile health (mHealth) technologies are feasible in a suicide prevention setting. The aim of this study was to report three cases of patients recruited in the Suicide Intervention Assisted by Messages (SIAM) study to describe how a mobile intervention may influence follow-up. SIAM is a 2-year, multicenter randomized controlled trial conducted by the Brest University Hospital, France. Participants in the intervention group receive SIAM text messages 48 hours after discharge, then at day 8 and day 15, and months 1, 2, 3, 4, 5, and 6. The study includes participants aged 18 years or older, who have attended a participating hospital for an SA, and have been discharged from the emergency department (ED) or a psychiatric unit (PU) for a stay of less than 7 days. Eligible participants are randomized between the SIAM intervention messages and a control group. In this study, we present three cases from the ongoing SIAM study that demonstrate the capability of a mobile-based brief contact intervention for triggering patient-initiated contact with a crisis support team at various time points throughout the mobile-based follow-up period. Out of the 244 patients recruited in the SIAM randomized controlled trial, three cases were selected to illustrate the impact of mHealth on suicide risk management. Participants initiated contact with the emergency crisis support service after receiving text messages up to 6 months following discharge from the hospital. Contact was initiated immediately following receipt of a text message or up to 6 days following a message. This text message-based brief contact intervention has demonstrated the potential to reconnect suicidal individuals with crisis support services while they are experiencing suicidal ideation as well as in a period after receiving messages. As follow-up phone calls over an extended period of time may not be feasible, this intervention has the potential to offer simple technological support for individuals following discharge from the ED. ClinicalTrials.gov NCT02106949; https://clinicaltrials.gov/ct2/show/NCT02106949 (Archived by WebCite at http://www.webcitation.org/6wMtAFL49). ©Sofian Berrouiguet, Mark Erik Larsen, Catherine Mesmeur, Michel Gravey, Romain Billot, Michel Walter, HUGOPSY Network, Christophe Lemey, Philippe Lenca. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 10.01.2018.

Toward mHealth Brief Contact Interventions in Suicide Prevention: Case Series From the Suicide Intervention Assisted by Messages (SIAM) Randomized Controlled Trial

PubMed Central

Mesmeur, Catherine; Gravey, Michel; Billot, Romain; Walter, Michel; Lemey, Christophe; Lenca, Philippe

2018-01-01

Background Research indicates that maintaining contact either via letter or postcard with at-risk adults following discharge from care services after a suicide attempt (SA) can reduce reattempt risk. Pilot studies have demonstrated that interventions using mobile health (mHealth) technologies are feasible in a suicide prevention setting. Objective The aim of this study was to report three cases of patients recruited in the Suicide Intervention Assisted by Messages (SIAM) study to describe how a mobile intervention may influence follow-up. Methods SIAM is a 2-year, multicenter randomized controlled trial conducted by the Brest University Hospital, France. Participants in the intervention group receive SIAM text messages 48 hours after discharge, then at day 8 and day 15, and months 1, 2, 3, 4, 5, and 6. The study includes participants aged 18 years or older, who have attended a participating hospital for an SA, and have been discharged from the emergency department (ED) or a psychiatric unit (PU) for a stay of less than 7 days. Eligible participants are randomized between the SIAM intervention messages and a control group. In this study, we present three cases from the ongoing SIAM study that demonstrate the capability of a mobile-based brief contact intervention for triggering patient-initiated contact with a crisis support team at various time points throughout the mobile-based follow-up period. Results Out of the 244 patients recruited in the SIAM randomized controlled trial, three cases were selected to illustrate the impact of mHealth on suicide risk management. Participants initiated contact with the emergency crisis support service after receiving text messages up to 6 months following discharge from the hospital. Contact was initiated immediately following receipt of a text message or up to 6 days following a message. Conclusions This text message–based brief contact intervention has demonstrated the potential to reconnect suicidal individuals with crisis support services while they are experiencing suicidal ideation as well as in a period after receiving messages. As follow-up phone calls over an extended period of time may not be feasible, this intervention has the potential to offer simple technological support for individuals following discharge from the ED. Trial Registration ClinicalTrials.gov NCT02106949; https://clinicaltrials.gov/ct2/show/NCT02106949 (Archived by WebCite at http://www.webcitation.org/6wMtAFL49) PMID:29321126

Impact of random and systematic recall errors and selection bias in case--control studies on mobile phone use and brain tumors in adolescents (CEFALO study).

PubMed

Aydin, Denis; Feychting, Maria; Schüz, Joachim; Andersen, Tina Veje; Poulsen, Aslak Harbo; Prochazka, Michaela; Klaeboe, Lars; Kuehni, Claudia E; Tynes, Tore; Röösli, Martin

2011-07-01

Whether the use of mobile phones is a risk factor for brain tumors in adolescents is currently being studied. Case--control studies investigating this possible relationship are prone to recall error and selection bias. We assessed the potential impact of random and systematic recall error and selection bias on odds ratios (ORs) by performing simulations based on real data from an ongoing case--control study of mobile phones and brain tumor risk in children and adolescents (CEFALO study). Simulations were conducted for two mobile phone exposure categories: regular and heavy use. Our choice of levels of recall error was guided by a validation study that compared objective network operator data with the self-reported amount of mobile phone use in CEFALO. In our validation study, cases overestimated their number of calls by 9% on average and controls by 34%. Cases also overestimated their duration of calls by 52% on average and controls by 163%. The participation rates in CEFALO were 83% for cases and 71% for controls. In a variety of scenarios, the combined impact of recall error and selection bias on the estimated ORs was complex. These simulations are useful for the interpretation of previous case-control studies on brain tumor and mobile phone use in adults as well as for the interpretation of future studies on adolescents. Copyright © 2011 Wiley-Liss, Inc.

School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

ERIC Educational Resources Information Center

Gray, Shaun L.

2017-01-01

Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

Cases on Technological Adaptability and Transnational Learning: Issues and Challenges

ERIC Educational Resources Information Center

Mukerji, Siran, Ed.; Tripathi, Purnendu, Ed.

2010-01-01

Technology holds the key for bridging the gap between access to quality education and the need for enhanced learning experiences. This book contains case studies on divergent themes of personalized learning environments, inclusive learning for social change, innovative learning and assessment techniques, technology and international partnership…

Information Security in a World of Global Connectivity: A Case Study

ERIC Educational Resources Information Center

Lawrence, Cameron; Olson, Garrett; Douma, Bambi

2015-01-01

The widespread use of digital technologies such as smartphones, tablets, and notebook computers expose firms engaged in international business to risks that far exceed what most corporate technology users understand. This case study examines some of the technology-specific vulnerabilities managers face when engaged in international travel and…

Cases on Technology Integration in Mathematics Education

ERIC Educational Resources Information Center

Polly, Drew, Ed.

2015-01-01

Common Core education standards establish a clear set of specific ideas and skills that all students should be able to comprehend at each grade level. In an effort to meet these standards, educators are turning to technology for improved learning outcomes. "Cases on Technology Integration in Mathematics Education" provides a compilation…

[Which one is more important, raw materials or productive technology?--a case study for quality consistency control of Gegen Qinlian decoction].

PubMed

Zhong, Wen; Chen, Sha; Zhang, Jun; Wang, Yu-Sheng; Liu, An

2016-03-01

To investigate the effect of Chinese medicine raw materials and production technology on quality consistency of Chinese patent medicines with Gegen Qinlian decoction as an example, and establish a suitable method for the quality consistency control of Chinese patent medicines. The results showed that the effect of production technology on the quality consistency was generally not more than 5%, while the effect of raw materials was even more than 30%, indicating that the effect of raw materials was much greater than that of the production technology. In this study, blend technology was used to improve the quality consistency of raw materials. As a result, the difference between the product produced by raw materials and reference groups was less than 5%, thus increasing the quality consistence of finished products. The results showed that under the current circumstances, the main factor affecting the quality consistency of Chinese patent medicines was raw materials, so we shall pay more attention to the quality of Chinese medicine's raw materials. Finally, a blend technology can improve the quality consistency of Chinese patent medicines. Copyright© by the Chinese Pharmaceutical Association.

The risk of acute liver injury among users of antibiotic medications: a comparison of case-only studies.

PubMed

Brauer, Ruth; Ruigómez, Ana; Klungel, Olaf; Reynolds, Robert; Feudjo Tepie, Maurille; Smeeth, Liam; Douglas, Ian

2016-03-01

The aims of this study were two-fold: (i) to investigate the effect of exposure to antibiotic agents on the risk of acute liver injury using a self-controlled case series and case-crossover study and (ii) to compare the results between the case-only studies. For the self-controlled case series study relative incidence ratios (IRR) were calculated by dividing the rate of acute liver injury experienced during patients' periods of exposure to antibiotics to patients' rate of events during non-exposed time using conditional Poisson regression. For the case-crossover analysis we calculated Odds Ratios (OR) using conditional logistic regression by comparing exposure during 14- and 30-day risk windows with exposure during control moments. Using the self-controlled case series approach, the IRR was highest during the first 7 days after receipt of a prescription (10.01, 95% CI 6.59-15.18). Omitting post-exposure washout periods lowered the IRR to 7.2. The highest estimate in the case-crossover analysis was found when two 30-day control periods 1 year prior to the 30-day ALI risk period were retained in the analysis: OR = 6.5 (95% CI, 3.95-10.71). The lowest estimate was found when exposure in the 14-day risk period was compared to exposure in four consecutive 14-day control periods immediately prior to the risk period (OR = 3.05, 95% CI, 2.06-4.53). An increased relative risk of acute liver injury was consistently observed using both self-controlled case series and case-crossover designs. Case-only designs can be used as a viable alternative study design to study the risk of acute liver injury, albeit with some limitations. © 2015 The Authors Pharmacoepidemiology and Drug Safety Published by John Wiley & Sons Ltd.

Iodine 125 Brachytherapy With Vitrectomy and Silicone Oil in the Treatment of Uveal Melanoma: 1-to-1 Matched Case-Control Series

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCannel, Tara A., E-mail: TMcCannel@jsei.ucla.edu; McCannel, Colin A.

Purpose: We initially reported the radiation-attenuating effect of silicone oil 1000 centistokes for iodine 125. The purpose of this report was to compare the clinical outcomes in case patients who had iodine 125 brachytherapy with vitrectomy and silicone oil 1000 centistokes with the outcomes in matched control patients who underwent brachytherapy alone. Methods and Materials: Consecutive patients with uveal melanoma who were treated with iodine 125 plaque brachytherapy and vitrectomy with silicone oil with minimum 1-year follow-up were included. Control patients who underwent brachytherapy alone were matched for tumor size, location, and sex. Baseline patient and tumor characteristics and tumor response tomore » radiation, final visual acuity, macular status, central macular thickness by ocular coherence tomography (OCT), cataract progression, and metastasis at last follow-up visit were compared. Surgical complications were also determined. Results: Twenty case patients met the inclusion criteria. The average follow-up time was 22.1 months in case patients and 19.4 months in control patients. The final logMAR vision was 0.81 in case patients and 1.1 in control patients (P=.071); 8 case patients and 16 control patients had abnormal macular findings (P=.011); and the average central macular thickness by OCT was 293.2 μm in case patients and 408.5 μm in control patients (P=.016). Eleven case patients (55%) and 1 control patient (5%) had required cataract surgery at last follow-up (P=.002). Four patients in the case group and 1 patient in the control group experienced metastasis (P=.18). Among the cases, intraoperative retinal tear occurred in 3 patients; total serous retinal detachment and macular hole developed in 1 case patient each. There was no case of rhegmatogenous retinal detachment, treatment failure, or local tumor dissemination in case patients or control patients. Conclusions: With up to 3 years of clinical follow-up, silicone oil during brachytherapy for the treatment of uveal melanoma resulted in fewer abnormal maculas, lower central macular thickness on OCT, and a trend toward better final visual acuity in comparison with matched control patients who underwent brachytherapy alone.« less

Monitoring of Overhead Transmission Lines: A Review from the Perspective of Contactless Technologies

NASA Astrophysics Data System (ADS)

Khawaja, Arsalan Habib; Huang, Qi; Khan, Zeashan Hameed

2017-12-01

This paper describes a comprehensive review of non-contact technologies for overhead power transmission lines. Due to ever increasing emphasis on reducing accidents and speeding up diagnosis for automatically controlled grids, real time remote sensing and actuation is the new horizon for smart grid implementation. The technology overview with emphasis on the practical implementation of advanced non-contact technologies is discussed in this paper while considering optimization of the high voltage transmission lines parameters. In case of fault, the voltage and the current exceed limits of operation and hence real time reporting for control and diagnosis is a critical requirement. This paper aims to form a strong foundation for control and diagnosis of future power distribution systems so that a practitioner or researcher can make choices for a workable solution in smart grid implementation based on non-contact sensing.

On Problem of Synthesis of Control System for Quadrocopter

NASA Astrophysics Data System (ADS)

Larin, V. B.; Tunik, A. A.

2017-05-01

An algorithm for designing a control for a quadrocopter is given. Two cases of control of the horizontal motion of a vehicle are considered. Terminal location is given in one case, and cruise speed is given in the other case. The results are compared with those obtained by other authors

Cholera outbreak caused by drinking lake water contaminated with human faeces in Kaiso Village, Hoima District, Western Uganda, October 2015.

PubMed

Oguttu, David W; Okullo, A; Bwire, G; Nsubuga, P; Ario, A R

2017-10-10

On 12 October 2015, a cholera outbreak involving 65 cases and two deaths was reported in a fishing village in Hoima District, Western Uganda. Despite initial response by the local health department, the outbreak persisted. We conducted an investigation to identify the source and mode of transmission, and recommend evidence-led interventions to control and prevent cholera outbreaks in this area. We defined a suspected case as the onset of acute watery diarrhoea from 1 October to 2 November 2015 in a resident of Kaiso Village. A confirmed case was a suspected case who had Vibrio cholerae isolated from stool. We found cases by record review and active community case finding. We performed descriptive epidemiologic analysis for hypothesis generation. In an unmatched case-control study, we compared exposure histories of 61 cases and 126 controls randomly selected among asymptomatic village residents. We also conducted an environmental assessment and obtained meteorological data from a weather station. We identified 122 suspected cases, of which six were culture-confirmed, 47 were confirmed positive with a rapid diagnostic test and two died. The two deceased cases had onset of the disease on 2 October and 10 October, respectively. Heavy rainfall occurred on 7-11 October; a point-source outbreak occurred on 12-15 October, followed by continuous community transmission for two weeks. Village residents usually collected drinking water from three lakeshore points - A, B and C: 9.8% (6/61) of case-persons and 31% (39/126) of control-persons were found to usually use point A, 21% (13/61) of case-persons and 37% (46/126) of control-persons were found to usually use point B (OR = 1.8, 95% CI: 0.64-5.3), and 69% (42/61) of case-persons and 33% (41/126) of control-persons were found to usually use point C (OR = 6.7; 95% CI: 2.5-17) for water collection. All case-persons (61/61) and 93% (117/126) of control-persons reportedly never treated/boiled drinking water (OR = ∞, 95% CI Fisher : 1.0 - ∞). The village's piped water system had been vandalised and open defecation was common due to a lack of latrines. The lake water was found to be contiminated due to a gully channel that washed the faeces into the lake at point C. This outbreak was likely caused by drinking lake water contaminated by faeces from a gully channel. We recommend treatment of drinking water, fixing the vandalised piped-water system and constructing latrines.

Long-Term Monitoring of Cased Pipelines Using Longrange Guided-Wave Technique

DOT National Transportation Integrated Search

2009-05-19

Integrity management programs for gas transmission pipelines are required by The Office of Pipeline Safety (OPS)/DOT. Direct Assessment (DA) and 'Other Technologies' have become the focus of assessment options for pipeline integrity on cased crossing...

Interventional cardiology live case presentations regulatory considerations.

PubMed

Farb, Andrew; Brown, Sheila A; Wolf, Deborah A; Zuckerman, Bram

2010-10-01

Live case presentations are increasingly common at interventional cardiology conferences. Taking advantage of significant advances in communication technology, broadcasts of procedures can be viewed as an extension of traditional medical education targeted to large groups of practitioners. However, there are important ethical, commercial, and patient safety issues associated with live cases that deserve attention. Use of investigational devices in live case demonstrations is subject to review and approval by FDA's Center for Devices and Radiological Health (CDRH), and the outcomes of patients participating in live cases are considered in the overall clinical study results. This article discusses CDRH's regulatory view of live case presentations with a focus on patient safety, clinical trial integrity, and concerns regarding improper medical device promotion. Copyright © 2010. Published by Elsevier Inc.

Long-term proliferation and safeguards issues in future technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keisch, B.; Auerbach, C.; Fainberg, A.

1986-02-01

The purpose of the task was to assess the effect of potential new technologies, nuclear and non-nuclear, on safeguards needs and non-proliferation policies, and to explore possible solutions to some of the problems envisaged. Eight subdivisions were considered: New Enrichment Technologies; Non-Aqueous Reprocessing Technologies; Fusion; Accelerator-Driven Reactor Systems; New Reactor Types; Heavy Water and Deuterium; Long-Term Storage of Spent Fuel; and Other Future Technologies (Non-Nuclear). For each of these subdivisions, a careful review of the current world-wide effort in the field provided a means of subjectively estimating the viability and qualitative probability of fruition of promising technologies. Technologies for whichmore » safeguards and non-proliferation requirements have been thoroughly considered by others were not restudied here (e.g., the Fast Breeder Reactor). The time scale considered was 5 to 40 years for possible initial demonstration although, in some cases, a somewhat optimistic viewpoint was embraced. Conventional nuclear-material safeguards are only part of the overall non-proliferation regime. Other aspects are international agreements, export controls on sensitive technologies, classification of information, intelligence gathering, and diplomatic initiatives. The focus here is on safeguards, export controls, and classification.« less

The Urolift System for the Treatment of Lower Urinary Tract Symptoms Secondary to Benign Prostatic Hyperplasia: A NICE Medical Technology Guidance.

PubMed

Ray, Alistair; Morgan, Helen; Wilkes, Antony; Carter, Kimberley; Carolan-Rees, Grace

2016-10-01

As part of its Medical Technologies Evaluation Programme (MTEP), the National Institute for Health and Care Excellence (NICE) invited Neotract (manufacturer) to submit clinical and economic evidence for their prostatic urethral lift device, Urolift, for the relief of lower urinary tract symptoms secondary to benign prostatic hyperplasia (LUTS BPH). The Urolift System uses implants to retract the prostatic lobe away from the urethral lumen. The clinical evidence used in the manufacturer's submission shows that Urolift is effective for the treatment of BPH. Urolift delivers a weighted mean International Prostate Symptom Score (IPSS) improvement of between 9.22 and 11.82 points. These Urolift improvements are greater than a published 'marked improvement' in IPSS score of 8.80. Comparison with randomised controlled trials (RCTs) of TURP (Transurethral Resection of Prostate) and HoLEP (Holmium Laser Enucleation of Prostate) show that Urolift does not yield better clinical outcomes from baseline compared to TURP and HoLEP in terms of IPSS, QoL (Quality of Life) and Qmax (maximum urinary flow). However, Urolift appears to have the advantage in terms of minimal and mild complications, and this may be of interest to patients and urologists. The economic case for Urolift was made using a very detailed and thorough de novo cost model. The base case posed by the manufacturer placed Urolift at almost cost-neutral (£3 cost incurring, based on 2014 prices) compared to TURP, and £418 cost incurring compared to HoLEP. In an additional scenario comparing day-case Urolift with in-patient TURP, the estimated per-patient savings with Urolift were £286 compared with monopolar TURP (mTURP) and £159 compared with bipolar TURP (BiTURP). NICE guidance MTG26 recommends that the case for adoption of Urolift was supported by the evidence, when implemented in a day-case setting.

Snippets from the past: is Flint, Michigan, the birthplace of the case-control study?

PubMed

Morabia, Alfredo

2013-12-15

In the summer of 1924, an outbreak of scarlet fever occurred in Flint, Michigan. Unable to trace it to the usual causes, particularly fresh milk, the Michigan Department of Health used a novel approach to disentangle the enigma: The 116 cases of scarlet fever were compared with 117 "controls" selected from neighbors of the quarantined cases and from patients at the City Health Center who had been treated for ailments unrelated to scarlet fever. The extraordinary culprit was ice cream, which had a frequent/occasional/none consumption prevalence of 60%, 34%, and 6% among the cases and 24%, 51%, and 25% among the controls, respectively. The 1925 report reads, "Detailed epidemiological investigation, by means of case histories and control histories on well persons, confirmed early suspicions and established the fact that the epidemic was spread by ice cream" (Am J Hyg. 1925;5(5):669-681). This forgotten epidemiologic study is the oldest study using the case-control design to have been resurrected thus far. The case-control study design may have been conceived simultaneously, but independently and for different purposes, in England (Janet Lane-Claypon's 1926 report on the determinants of breast cancer) and the United States.

Rubella outbreak investigation, Gokwe North District, Midlands province, Zimbabwe, 2014 - a case control study.

PubMed

Makoni, Annamercy Chenaimoyo; Chemhuru, Milton; Bangure, Donewell; Gombe, Notion Tafara; Tshimanga, Mufuta

2015-01-01

Rubella is a contagious disease, caused by rubella virus and transmitted via the respiratory route. Rubella in pregnancy may cause Congenital Rubella Syndrome (CRS), characterized by multiple defects to the brain, heart, eyes and ears. Gokwe North experienced an increase in rubella cases from 6 cases (24 June 2014) to 374 cases (12 August 2014). The study was conducted to determine risk factors associated with contracting rubella. A 1:1 unmatched case control study was conducted. A case was a child <15 years, resided in Gokwe North, with maculopapular rash and tested positive for rubella specific IgM or was linked epidemiologically to a laboratory confirmed case. Blood was collected for laboratory diagnosis. An interviewer administered questionnaire was used. Epi Info™ was used to analyze data. Eighty eight cases and 88 controls were recruited, median age for cases was 7 years (Q1 = 4, Q3 = 8) and 6 years (Q1 = 3, Q3 = 9) for controls. Independent risk factors for contracting rubella were; classmate contact (AOR 9.44; (95% CI 4.29-20.77)) and having >3 children in a household (AOR 2.59; 95%CI (1.23-5.42)). Only 10.2% and 6.8% of the caregivers' cases and controls respectively, knew rubella is spread through contact with an infected person (p = 0.57). Majority of caregivers (97.8%) reported to the health facility within two days of onset of rash. Outbreak was driven by contact at school and was spread into the community through school children. Screening and isolation of the sick controlled the outbreak. Routine rubella vaccination could be considered to prevent similar outbreaks.

Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

NASA Astrophysics Data System (ADS)

Gnanakkan, Dionysius Joseph

This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions in Biology documented by American Association for the Advancement of Science. The sample consisted of eight teachers: four rural public school teachers, two public selective enrollment school teachers, and two private school teachers. Each teacher was followed for two Units of instruction. Data collected included classroom observations, field notes, student assignments and tests, teacher interviews, and pre-and post-misconception assessments. Paired t-tests were done to analyze the pre-post test data at a significance level of 0.05 and the qualitative data was analyzed using the constant comparative method. Each case study was characterized and then a cross-case analyses was done to find common themes across the different cases. Teachers were found to use the learning technologies as a tool to supplement instruction to visualize abstract processes, collect data, and explore abstract concepts and processes. Teachers were found to situate learning, use scaffolding and questioning and make students work in collaborative groups. The genetics, photosynthesis, and evolution misconceptions were better alleviated than cellular respiration. Student work that was collected demonstrated a superficial understanding of the concepts under discussion even when they had misconceptions. The teachers used the learning technologies in their classrooms for a variety of reasons: visual illustrations, time-saving measure to collect data, best way to collect data, engaging and fun for students and the interactive nature of the visualization tools and models. The study's findings had many implications for research, professional development, teacher education, teaching practice, administrators, and learning technology developers. More detailed research within similar school settings (public, charter, and private) is needed to verify the common findings across the different cases in this study. An implication is that learning technology integration could be modeled with instructional scaffolds and questioning and incorporating higher order thinking tasks. Learning technology developers should consider the collaborative learning groups while developing these technologies.

[Risk factors for multidrug-resistant tuberculosis in the city of Kinshasa in the Democratic Republic of Congo].

PubMed

Misombo-Kalabela, André; Nguefack-Tsague, Georges; Kalla, Ginette Claude Mireille; Ze, Emmanuel Afane; Diangs, Kimpanga; Panda, Tshapenda; Kebela, Ilunga; Fueza, Serge Bisuta; Magazani, Nzanzu; Mbopi-Kéou, François-Xavier

2016-01-01

The aim of this study was to determine the risk factors for multidrug-resistant tuberculosis (TB) in the city of Kinshasa in the Democratic Republic of Congo. This was a case control study. The cases included all TB patients notified as resistant to rifampicin and isoniazid in Kinshasa from January 2012 to June 2013. The controls included TB patients treated during the same period as the cases and declared cured at the end of treatment. For this study, we obtained ethical clearance. The sample consisted of 213 participants, 132 men (62%) and 81 women (38%). The median age was 31 years (16-73 years). Factors associated with significant (p< 0,05) multidrug-resistant tuberculosis were the non-observance of the hours of taking drugs (0R = 111) (80% cases, 4% controls), the failure of treatment (0R = 20 (76% cases, 13% controls); the concept of multidrug-resistant tuberculosis in the family (0R = 6.4) (28% cases, 6% controls); a lack of knowledge of multidrug-resistant tuberculosis (0R = 3.2) (31% cases, 59% controls); a stay in prison (0R = 7.6) (10% cases, 1% controls) and the interruption of treatment (0R = 6.1) (59% cases, 19% controls). The emergence of multidrug-resistant tuberculosis can be avoided by the installation of suitable diagnosis and treatment strategies.

Macroinformational analysis of conditions for controllability of space-vehicle orbit

NASA Astrophysics Data System (ADS)

Glazov, B. I.

2011-12-01

The general axiomatics of information measures for the macro analysis of relations of an information-cybernetic system in the control is introduced. The general structure of a semantically marked graph of open and closed relations of an information-cybernetic system between the participants in the environment, as well as thenecessary axiomatic and technological information-cybernetic system conditions of controllability and observability of objects, for the case of a space vehicle in orbit, are justified.

Major technology issues in surgical data collection.

PubMed

Kirschenbaum, I H

1995-10-01

Surgical scheduling and data collection is a field that has a long history as well as a bright future. Historically, surgical cases have always involved some amount of data collection. Surgical cases are scheduled and then reviewed. The classic method, that large black surgical log, actually still exists in many hospitals. In fact, there is nothing new about the recording or reporting of surgical cases. If we only needed to record the information and produce a variety of reports on the data, then modern electronic technology would function as a glorified fast index card box--or, in computer database terms, a simple flat file database. But, this is not the future of technology in surgical case management. This article makes the general case for integrating surgical data systems. Instead of reviewing specific software, it essentially addresses the issues of strategic planning related to this important aspect of medical information systems.

The Misconception of Case-Control Studies in the Plastic Surgery Literature: A Literature Audit.

PubMed

Hatchell, Alexandra C; Farrokhyar, Forough; Choi, Matthew

2017-06-01

Case-control study designs are commonly used. However, many published case-control studies are not true case-controls and are in fact mislabeled. The purpose of this study was to identify all case-control studies published in the top three plastic surgery journals over the past 10 years, assess which were truly case-control studies, clarify the actual design of the articles, and address common misconceptions. MEDLINE, Embase, and Web of Science databases were searched for case-control studies in the three highest-impact factor plastic surgery journals (2005 to 2015). Two independent reviewers screened the resulting titles, abstracts, and methods, if applicable, to identify articles labeled as case-control studies. These articles were appraised and classified as true case-control studies or non-case-control studies. The authors found 28 articles labeled as case-control studies. However, only six of these articles (21 percent) were truly case-control designs. Of the 22 incorrectly labeled studies, one (5 percent) was a randomized controlled trial, three (14 percent) were nonrandomized trials, two (9 percent) were prospective comparative cohort designs, 14 (64 percent) were retrospective comparative cohort designs, and two (9 percent) were cross-sectional designs. The mislabeling was worse in recent years, despite increases in evidence-based medicine awareness. The majority of published case-control studies are not in fact case-control studies. This misunderstanding is worsening with time. Most of these studies are actually comparative cohort designs. However, some studies are truly clinical trials and thus a higher level of evidence than originally proposed.

A PC-Based Free Text DSS for Health Care

NASA Technical Reports Server (NTRS)

Grams, Ralph R.; Buchanan, Paul; Massey, James K.; Jin, Ming

1987-01-01

A free Decision Support System(DST) has been constructed for health care professional that allows the analysis of complex medical cases and the creation of diagnostic list of potential diseases for clinical evaluation.The system uses a PC-based text management system specifically designed for desktop operation. The texts employed in the decision support package include the Merck Manual (published by Merck Sharpe & Dohme) and Control of Communicable Diseas in Man (published by the American Public Health Association). The background and design of the database are discussed along with a structured analysis procedure for handling free text DSS system. A case study is presented to show the application of this technology and conclusions are drawn in the summary that point to expanded areas of professional intention and new frontiers yet to be explored in this rapidly progressing field.

Screening Electronic Health Record-Related Patient Safety Reports Using Machine Learning.

PubMed

Marella, William M; Sparnon, Erin; Finley, Edward

2017-03-01

The objective of this study was to develop a semiautomated approach to screening cases that describe hazards associated with the electronic health record (EHR) from a mandatory, population-based patient safety reporting system. Potentially relevant cases were identified through a query of the Pennsylvania Patient Safety Reporting System. A random sample of cases were manually screened for relevance and divided into training, testing, and validation data sets to develop a machine learning model. This model was used to automate screening of remaining potentially relevant cases. Of the 4 algorithms tested, a naive Bayes kernel performed best, with an area under the receiver operating characteristic curve of 0.927 ± 0.023, accuracy of 0.855 ± 0.033, and F score of 0.877 ± 0.027. The machine learning model and text mining approach described here are useful tools for identifying and analyzing adverse event and near-miss reports. Although reporting systems are beginning to incorporate structured fields on health information technology and the EHR, these methods can identify related events that reporters classify in other ways. These methods can facilitate analysis of legacy safety reports by retrieving health information technology-related and EHR-related events from databases without fields and controlled values focused on this subject and distinguishing them from reports in which the EHR is mentioned only in passing. Machine learning and text mining are useful additions to the patient safety toolkit and can be used to semiautomate screening and analysis of unstructured text in safety reports from frontline staff.

Control of endemic nosocomial legionnaires' disease by using sterile potable water for high risk patients.

PubMed Central

Marrie, T. J.; Haldane, D.; MacDonald, S.; Clarke, K.; Fanning, C.; Le Fort-Jost, S.; Bezanson, G.; Joly, J.

1991-01-01

In a setting where potable water is contaminated with Legionella pneumophila serogroup 1, we performed two case control studies. The first case control study consisted of 17 cases of nosocomial Legionnaires' disease (LD) and 33 control (the patients who were admitted to the ward where the case was admitted immediately before and after the case) subjects. Cases had a higher mortality rate 65% vs 12% (P less than 0.004); were more likely to have received assisted ventilation (P less than 0.00001); to have nasogastric tubes (P less than 0.0004) and to be receiving corticosteroids or other immunosuppressive therapy (P less than 0.0001). Based on the results of this study, sterile water was used to flush nasogastric tubes and to dilute nasogastric feeds. Only 3 cases of nosocomial LD occurred during the next year compared with 12 the previous year (P less than 0.0001). Nine cases subsequently occurred and formed the basis for the second case-control study. Eighteen control subjects were those patients admitted to the same unit where the case developed LD, immediately before and after the case. The mortality rate for the cases was 89% vs 6% for controls (P less than 0.00003). The only other significant difference was that cases were more likely to be receiving corticosteroids or other immunosuppressive therapy 89% vs 39% (less than 0.01). We hypothesized that microaspiration of contaminated potable water by immunocompromised patients was a risk factor for nosocomial Legionnaires' disease. From 17 March 1989 onwards such patients were given only sterile potable water. Only two cases of nosocomial LD occurred from June 1989 to September 1990 and both occurred on units where the sterile water policy was not in effect. We conclude that aspiration of contaminated potable water is a possible route for acquisition of nosocomial LD in our hospital and that provision of sterile potable water to high risk patients (those who are receiving corticosteroids or other immunosuppressive drugs; organ transplant recipients or hospitalized in an intensive care unit) should be mandatory. PMID:1752308

Case-control vaccine effectiveness studies: Data collection, analysis and reporting results.

PubMed

Verani, Jennifer R; Baqui, Abdullah H; Broome, Claire V; Cherian, Thomas; Cohen, Cheryl; Farrar, Jennifer L; Feikin, Daniel R; Groome, Michelle J; Hajjeh, Rana A; Johnson, Hope L; Madhi, Shabir A; Mulholland, Kim; O'Brien, Katherine L; Parashar, Umesh D; Patel, Manish M; Rodrigues, Laura C; Santosham, Mathuram; Scott, J Anthony; Smith, Peter G; Sommerfelt, Halvor; Tate, Jacqueline E; Victor, J Chris; Whitney, Cynthia G; Zaidi, Anita K; Zell, Elizabeth R

2017-06-05

The case-control methodology is frequently used to evaluate vaccine effectiveness post-licensure. The results of such studies provide important insight into the level of protection afforded by vaccines in a 'real world' context, and are commonly used to guide vaccine policy decisions. However, the potential for bias and confounding are important limitations to this method, and the results of a poorly conducted or incorrectly interpreted case-control study can mislead policies. In 2012, a group of experts met to review recent experience with case-control studies evaluating vaccine effectiveness; we summarize the recommendations of that group regarding best practices for data collection, analysis, and presentation of the results of case-control vaccine effectiveness studies. Vaccination status is the primary exposure of interest, but can be challenging to assess accurately and with minimal bias. Investigators should understand factors associated with vaccination as well as the availability of documented vaccination status in the study context; case-control studies may not be a valid method for evaluating vaccine effectiveness in settings where many children lack a documented immunization history. To avoid bias, it is essential to use the same methods and effort gathering vaccination data from cases and controls. Variables that may confound the association between illness and vaccination are also important to capture as completely as possible, and where relevant, adjust for in the analysis according to the analytic plan. In presenting results from case-control vaccine effectiveness studies, investigators should describe enrollment among eligible cases and controls as well as the proportion with no documented vaccine history. Emphasis should be placed on confidence intervals, rather than point estimates, of vaccine effectiveness. Case-control studies are a useful approach for evaluating vaccine effectiveness; however careful attention must be paid to the collection, analysis and presentation of the data in order to best inform evidence-based vaccine policies. Published by Elsevier Ltd.

Reflections on a Technology Integration Project.

ERIC Educational Resources Information Center

Kovalik, Cindy

2003-01-01

Describes Technology-Enhanced Learning Outcomes (TELO), a grant funded by the Ohio Learning Network to help K-12 teachers integrate technology by having teams of undergraduate education students design and develop technology-enhanced instructional unites using existing curriculum topics. Presents a case study that investigated the nature and…

Analysis of the development and diffusion of technological innovations in oil spill forecasting: The MEDESS-4MS case

NASA Astrophysics Data System (ADS)

Marcati, Alberto; Prete, M. Irene; Mileti, Antonio; Cortese, Mario; Zodiatis, George; Karaolia, Andria; Gauci, Adam; Drago, Aldo

2016-11-01

This paper presents a case study on the management of users' engagement in the development of a new technology. Based on the experience of MEDESS-4MS, an integrated operational model for oil spill Decision Support System covering the whole Mediterranean Sea, the case study is aimed at the development of a framework for user engagement and for the management of its dual logic. Indeed, users may play a dual role in the innovation process, contributing to both the design of the innovation and its promotion. Users contribute to shaping the innovation, by aggregating and integrating knowledge, and they facilitate its diffusion, by adopting the innovation and fostering its adoption within the socio-economic system.

Propulsion/airframe integration issues for waverider aircraft

NASA Technical Reports Server (NTRS)

Blankson, Isaiah M.; Hagseth, Paul

1993-01-01

While many propulsion concepts and technologies developed for nonwaverider-type hypersonic vehicles may apply to waveriders, some aspects of these configurations require unique technological approaches. An evaluation is made of such distinctive opportunities in the cases of engine cycle selection, inlets, nozzle designs and integration, longitudinal stability, and thermal management. Also discussed are waverider requirements for control surface effectiveness, inlet boundary layer ingestion effects, and structural/configurational optimization, giving attention to trades in volumetric/structural efficiency and vehicle L/D.

Association between Zika virus infection and microcephaly in Brazil, January to May, 2016: preliminary report of a case-control study.

PubMed

de Araújo, Thalia Velho Barreto; Rodrigues, Laura Cunha; de Alencar Ximenes, Ricardo Arraes; de Barros Miranda-Filho, Demócrito; Montarroyos, Ulisses Ramos; de Melo, Ana Paula Lopes; Valongueiro, Sandra; de Albuquerque, Maria de Fátima Pessoa Militão; Souza, Wayner Vieira; Braga, Cynthia; Filho, Sinval Pinto Brandão; Cordeiro, Marli Tenório; Vazquez, Enrique; Di Cavalcanti Souza Cruz, Danielle; Henriques, Cláudio Maierovitch Pessanha; Bezerra, Luciana Caroline Albuquerque; da Silva Castanha, Priscila Mayrelle; Dhalia, Rafael; Marques-Júnior, Ernesto Torres Azevedo; Martelli, Celina Maria Turchi

2016-12-01

The microcephaly epidemic, which started in Brazil in 2015, was declared a Public Health Emergency of International Concern by WHO in 2016. We report the preliminary results of a case-control study investigating the association between microcephaly and Zika virus infection during pregnancy. We did this case-control study in eight public hospitals in Recife, Brazil. Cases were neonates with microcephaly. Two controls (neonates without microcephaly), matched by expected date of delivery and area of residence, were selected for each case. Serum samples of cases and controls and cerebrospinal fluid samples of cases were tested for Zika virus-specific IgM and by quantitative RT-PCR. Laboratory-confirmed Zika virus infection during pregnancy was defined as detection of Zika virus-specific IgM or a positive RT-PCR result in neonates. Maternal serum samples were tested by plaque reduction neutralisation assay for Zika virus and dengue virus. We estimated crude odds ratios (ORs) and 95% CIs using a median unbiased estimator for binary data in an unconditional logistic regression model. We estimated ORs separately for cases with and without radiological evidence of brain abnormalities. Between Jan 15, 2016, and May 2, 2016, we prospectively recruited 32 cases and 62 controls. 24 (80%) of 30 mothers of cases had Zika virus infection compared with 39 (64%) of 61 mothers of controls (p=0·12). 13 (41%) of 32 cases and none of 62 controls had laboratory-confirmed Zika virus infection; crude overall OR 55·5 (95% CI 8·6-∞); OR 113·3 (95% CI 14·5-∞) for seven cases with brain abnormalities; and OR 24·7 (95% CI 2·9-∞) for four cases without brain abnormalities. Our data suggest that the microcephaly epidemic is a result of congenital Zika virus infection. We await further data from this ongoing study to assess other potential risk factors and to confirm the strength of association in a larger sample size. Brazilian Ministry of Health, Pan American Health Organization, and Enhancing Research Activity in Epidemic Situations. Copyright This is an Open Access article published under the CC BY 3.0 IGO license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. In any use of this article, there should be no suggestion that WHO endorses any specific organisation, products or services. The use of the WHO logo is not permitted. This notice should be preserved along with the article's original URL.

A case-control study of bladder cancer in the United States rubber and tyre industry.

PubMed

Checkoway, H; Smith, A H; McMichael, A J; Jones, F S; Monson, R R; Tyroler, H A

1981-08-01

A case-control study of bladder cancer was conducted in five United States rubber and tyre companies to determine if there were high-risk jobs and work areas within the industry. The study included 220 male cases of bladder cancer, of whom 107 were identified from hospital record reviews and 113 from death certificates. Each case was matched individually with two industry controls by sex, race, year of birth, and company. One control was matched additionally by year of hire and duration of employment. Comparisons of cases and controls not matched by year of hire and age of hire showed no differences for those variables, which suggests that age and calendar period of first exposure to the industry were not risk determinants. When the work histories of both cases and controls were contrasted it was found that cases were more likely than controls to have worked in milling (odds ratio (OR) = 1.91) and calender operation (OR = 2.21) jobs. The relative risk estimates for milling and calender operation both exhibited linear trends of increase with duration of exposure. Milling and calender operation jobs entail potential exposures to volatilised reaction products from heated rubber stock. A better understanding of aetiological associations with job type will require more detailed characterisation of the work environment with regard to the sources and levels of aromatic amines and other suspected bladder carcinogens.

A case-control study of bladder cancer in the United States rubber and tyre industry.

PubMed Central

Checkoway, H; Smith, A H; McMichael, A J; Jones, F S; Monson, R R; Tyroler, H A

1981-01-01

A case-control study of bladder cancer was conducted in five United States rubber and tyre companies to determine if there were high-risk jobs and work areas within the industry. The study included 220 male cases of bladder cancer, of whom 107 were identified from hospital record reviews and 113 from death certificates. Each case was matched individually with two industry controls by sex, race, year of birth, and company. One control was matched additionally by year of hire and duration of employment. Comparisons of cases and controls not matched by year of hire and age of hire showed no differences for those variables, which suggests that age and calendar period of first exposure to the industry were not risk determinants. When the work histories of both cases and controls were contrasted it was found that cases were more likely than controls to have worked in milling (odds ratio (OR) = 1.91) and calender operation (OR = 2.21) jobs. The relative risk estimates for milling and calender operation both exhibited linear trends of increase with duration of exposure. Milling and calender operation jobs entail potential exposures to volatilised reaction products from heated rubber stock. A better understanding of aetiological associations with job type will require more detailed characterisation of the work environment with regard to the sources and levels of aromatic amines and other suspected bladder carcinogens. PMID:7272236

Exposure to residential electric and magnetic fields and risk of childhood leukemia.

PubMed

London, S J; Thomas, D C; Bowman, J D; Sobel, E; Cheng, T C; Peters, J M

1991-11-01

The relation between exposure to electric and magnetic fields in the home, as assessed by measurements, wiring configuration, and self-reported appliance use, and risk of leukemia was investigated in a case-control study among children from birth to age 10 years in Los Angeles County, California. Cases were ascertained through a population-based tumor registry from 1980 to 1987. Controls were drawn from friends and by random digit dialing. Interviews were obtained from 232 cases and 232 controls. Available for analysis were measurements of the magnetic field in the child's bedroom over 24 hours or longer (164 cases and 144 controls), spot measurements of magnetic and electric fields (140 cases and 109 controls), and wiring configuration (219 cases and 207 controls). No clear associations between leukemia risk and measured magnetic or electric fields were seen. An association between the Denver Wertheimer-Leeper wiring configuration and childhood leukemia risk was observed (odds ratio for very high relative to very low current and underground configuration combined = 2.15, 95% confidence interval 1.08-4.28; p for trend = 0.008) and was not substantially altered by adjustment for potential confounding factors. Cases were more likely than controls to report use of several appliances that produce high electric and magnetic fields. Our results support an association between childhood leukemia risk and wiring configuration, but not direct measurements of electric and magnetic fields.

Innovation in industry and the diffusion of technology.

PubMed

Utterback, J M

1974-02-15

The varied definitions used in the sources that have been discussed make any aggregate analysis difficult. A simple three-stage analysis of flows to, from, and within the firm was used to facilitate comparisons. Even so, each of the generalizations is drawn from relatively small and unrepresentative samples. Case studies may continue to be a source of ideas and hypotheses for further research, but do not appear to offer a means for deeper understanding of the innovation process. The retrospective nature of nearly all of the sources discussed probably means that the process has been viewed as much more rational and well-ordered than it is in fact. This failing is partially overcome in firsthand accounts such as those of Suites and Bueche (63) and Frey and Goldman (64). Each of these accounts involves a successful innovation according to technical or commercial criteria, or both. However, many of the characteristics of innovations that have failed commercially (10) appear to be similar to those of successful cases. The few longitudinal studies, and studies comparing more and less successful cases, do support the main conclusions drawn above (10, 32, 38). More serious problems are raised by the distinctly nonrepresentative nature of the samples used. There are few cases (17, 33, 65) in which the contributions of more than one organization, or details of interactions over a significant period of time, are discussed. There is a wide variation in the importance of the innovations included, ranging from those affecting the economy as a whole to cases involving production in a single firm, albeit with significant commercial results (66). In addition to questions of comparability and sampling, a central problem for further research on innovation will be to devise an operational model to account for interfirm and interindustry differences. Polar definitions used in past studies, "high technology" and "mature industry," for example, are insufficient. One possibility is to use the strategy for growth or competition evident in a firm or an industry, such as sales maximization (automotive), cost minimization (transportation, communications), performance maximization (aircraft, chemicals), or control of materials resources (mining, petroleum), as a basis for drawing distinctions (67). For example, in an industry that seeks to maximize sales, one would expect innovations that would be highly visible to consumers to be developed rapidly (68). In a cost-minimizing situation, production, as opposed to product technology, would be a major source of uncertainty, while the reverse might be the case in a performance-maximizing situation. Greater uncertainty arising from technical sources would imply greater sophistication in effective firms' product planning approaches, while a more stable technology would imply greater sophistication in market research and market-oriented strategies for innovation, and so forth. Much more work is needed along these lines if outcomes of interventions in the innovative process are to be predicted with any accuracy. Some implications for providing incentives and reducing barriers do seem clear from the work to date. Effective directions for federal action lie in strategies such as creating new markets through purchases or procurement policies; aggregating or focusing markets through regulation and other means; providing for market entry by contracts to smaller firms, venture capital, stronger patent protection, and so on; and providing for mobility and informal contacts within the technical community. Technology "push" strategies (such as tax incentives) to increase most research spending, prizes for new technology, and documentation and information retrieval systems would probably be less important in stimulating innovation. Definitive answers will require the most difficult kind of research-experiments in the field. Since the interventions required are difficult and expensive in most cases, they will not be under the researcher's control. Nor will the effect of policy changes be visible over a short period. Thus it seems imperative to take advantage of interventions that occur fortuitously to construct "quasi-experiments" (69) with as great a degree of control over other factors as possible. For example, have recent changes in policy regarding federally held patents increased the commercial use of these patents? Have changes in the capital gains laws retarded the development and growth of "spin-off" enterprises? Has the identification of technology gaps (3) and competitive opportunities stimulated innovation? The effects of such actions on technical innovation could be carefully observed with a modest but sustained research effort, which promises to yield valuable information beyond that available from largely historical sources.

Does iodine excess lead to hypothyroidism? Evidence from a case-control study in India.

PubMed

Kotwal, Atul; Kotwal, Jyoti; Prakash, Rajat; Kotwal, Narendra

2015-08-01

Iodine deficiency disorders have been known to mankind since antiquity and various researchers elucidated the role of iodine in its causation. However, recent evidence shows that the entire control program ignored multi-causality and association of increased iodine intake with hypothyroidism. This study was conducted to assess differences of iodine intake as measured by urinary iodine excretion (UIE) between cases of hypothyroidism and healthy controls. A case-control study was conducted with three groups (cases, hospital controls and community controls) in two cities of India. Patients with overt hypothyroidism were cases (n = 150) and were compared with age, sex and socioeconomic status-matched hospital (n = 154) and community (n = 488) controls. Thyroid function tests (T3, T4, TSH) were used as diagnostic and inclusion criteria. TPOAb and UIE estimation were carried out for all study participants. Mean values of TPOAb and UIE were higher in cases as compared to hospital controls as well as community controls (p <0.05). With a cut off of 34 IU/mL for TPOAb, more cases had an anti-TPO level >34 as compared to hospital controls (p <0.001) as well as community controls (p <0.001); OR, 0.06 (95% CI, 0.03, 0.12) and 0.08 (0.05, 0.12), respectively. For UIE cut-off of 300 μg/L, more cases than hospital controls (p = 0.090) and community controls (p = 0.001) had higher levels; OR, 0.671, (0.422, 1.066) and 0.509, (0.348, 0.744), respectively. The study has clearly shown that cases of hypothyroidism are associated with excess iodine intake. Cohort studies to generate further evidence and an eco-social epidemiological approach have been suggested as the way forward. Copyright © 2015 IMSS. Published by Elsevier Inc. All rights reserved.

Investigation to identify a resource-efficient case-control methodology for determining antibiotics associated with Clostridium difficile infection.

PubMed

Chung, Philip; Currie, Brian; Guo, Yi; Talansky, Moshe; Brown, Shakara; Ostrowsky, Belinda

2014-10-01

Antimicrobial exposure remains an important risk factor for developing Clostridium difficile infection (CDI). Efficient method to identify antibiotics associated with CDI is important for formulating strategies to curtail their use. As a prelude to a more extensive Agency for Healthcare Research and Quality-funded project (Evaluation & Research on Antimicrobial Stewardship's Effect on Clostridium difficile), we undertook an exploratory evaluation to determine a resource-efficient method for identifying antibiotic targets for antimicrobial stewardship interventions. The study compared a series of 6 focused case-control studies. Cases consisted of patients with laboratory-confirmed CDI admitted from July-October 2009. Controls were selected from patients without CDI hospitalized during the same period. Five groups of controls were matched to cases (2:1 ratio) using group-specific matching criteria, including admission date, age, type of admission, length of stay (LOS) to discharge, and/or LOS to CDI diagnosis. The final control group was selected from patients who received antibiotics during hospitalization. Data, including demographics and antibiotic usage, were compared between case and control groups. A total of 126 cases were matched to 6 groups of 252 controls. For control groups 1-5, the use of piperacillin and tazobactam, ceftriaxone or cefepime, ciprofloxacin or moxifloxacin, intravenous vancomycin, azithromycin, and antibiotics of last resort were significantly more frequent in case than control patients. For the final control group, the associations between ceftriaxone or cefepime, and ciprofloxacin or moxifloxacin use and CDI no longer persisted. This could in part be explained by differences in comorbidities between case and control patients even with stringent matching criteria. Use of a simple matching strategy to conduct case-control studies is an efficient and feasible compromise strategy, especially in resource-limited settings, to identify high-risk antibiotics associated with CDI. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Primary health care utilization prior to suicide: a retrospective case-control study among active-duty military personnel.

PubMed

Hochman, Eldar; Shelef, Leah; Mann, J John; Portugese, Shirly; Krivoy, Amir; Shoval, Gal; Weiser, Mark; Fruchter, Eyal

2014-08-01

About 45% of civilians who died by suicide had contact with a doctor within 1 month of death. Thus, educating primary care physicians (PCP) to detect and mitigate depression is an important suicide-prevention strategy. However, the PCP consulting rate before suicide has not been examined in a military population. We investigated the utilization of primary health care and mental health services by active-duty military personnel suicide cases prior to death in comparison to matched military controls. All suicides (N = 170) were extracted from a cohort of all active-duty Israeli military male personnel between 2002 and 2012. Applying a retrospective, nested case-control design, we compared primary care services utilization by suicide cases with demographic and occupationally matched military controls (N = 500). Whereas 38.3% of suicide cases contacted a PCP within the last month before death, only 27.6% of suicide cases contacted a mental health specialist during their entire service time. The PCP contact rate within 1 month before death or index day did not differ between suicide cases and military controls (38.3% vs. 33.8%, χ²₁ = 1.05, P = .3). More suicide cases contacted a mental health specialist within service time than did military controls (27.6% vs. 13.6%, χ²₁ = 10.85, P = .001). Even though PCP contact rate by military personnel who died by suicide is slightly lower than that reported for civilians who died by suicide prior to their death, it is higher than mental health specialist contact rate and higher than that by age-matched civilians who died by suicide. These results imply that PCPs education is a viable approach to suicide prevention in a military setting. © Copyright 2014 Physicians Postgraduate Press, Inc.

Energy-Efficient and Comfortable Buildings through Multivariate Integrated Control (ECoMIC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birru, Dagnachew; Wen, Yao-Jung; Rubinstein, Francis M.

2013-10-28

This project aims to develop an integrated control solution for enhanced energy efficiency and user comfort in commercial buildings. The developed technology is a zone-based control framework that minimizes energy usage while maintaining occupants’ visual and thermal comfort through control of electric lights, motorized venetian blinds and thermostats. The control framework is designed following a modular, scalable and flexible architecture to facilitate easy integration with exiting building management systems. The control framework contains two key algorithms: 1) the lighting load balancing algorithm and 2) the thermostat control algorithm. The lighting load balancing algorithm adopts a model-based closed-loop control approach tomore » determine the optimal electric light and venetian blind settings. It is formulated into an optimization problem with minimizing lighting-related energy consumptions as the objective and delivering adequate task light and preventing daylight glare as the constraints. The thermostat control algorithm is based on a well-established thermal comfort model and formulated as a root-finding problem to dynamically determine the optimal thermostat setpoint for both energy savings and improved thermal comfort. To address building-wide scalability, a system architecture was developed for the zone-based control technology. Three levels of services are defined in the architecture: external services, facility level services and zone level services. The zone-level service includes the control algorithms described above as well as the corresponding interfaces, profiles, sensors and actuators to realize the zone controller. The facility level services connect to the zones through a backbone network, handle supervisory level information and controls, and thus facilitate building-wide scalability. The external services provide communication capability to entities outside of the building for grid interaction and remote access. Various aspects of the developed control technology were evaluated and verified through both simulations and testbed implementations. Simulations coupling a DOE medium office reference building in EnergyPlus building simulation software and a prototype controller in Matlab were performed. During summer time in a mixed-humid climate zone, the simulations revealed reductions of 27% and 42% in electric lighting load and cooling load, respectively, when compared to an advanced base case with daylight dimming and blinds automatically tilted to block direct sun. Two single-room testbeds were established. The testbed at Philips Lighting business building (Rosemont, IL) was designed for quantifying energy performance of integrated controls. This particular implementation achieved 40% and 79% savings on lighting and HVAC energy, respectively, compared to a relatively simple base case operated on predefined schedules. While the resulting energy savings was very encouraging, it should be noted that there may be several caveats associated with it. 1) The test was run during late spring and early summer, and the savings numbers might not be directly used to extrapolate the annual energy savings. 2) Due to the needs for separate control and metering of the small-scale demonstrator within a large building, the HVAC system, hence the corresponding savings, did not represent a typical energy code-compliant design. 3) The light level in the control case was regulated at a particular setpoint, which was lower than then the full-on light level in the base case, and the savings resulted from tuning down the light level to the setpoint was not attributable to the contribution of the developed technology. The testbed at the Lawrence Berkeley National Laboratory (Berkeley, CA) specifically focused on glare control integration, and has demonstrated the feasibility and capability of the glare detection and prevention technique. While the short one-month test in this testbed provided a functional indication of the developed technology, and it would require at least a full solstice-to-solstice cycle to ruinously quantify the performance, which was not possible within the project timeframe. There are certain limitations inherited from the operational assumptions, which could potentially affect the effectiveness and applicability of the developed control technologies. The system takes a typical ceiling-mounting approach for the photosensor locations, and therefore, the control performance relies on proper commissioning or the built-in intelligence of the photosensor for pertinent task light level estimations. For spaces where daylight penetration diminishes significantly deeper into the zone, certain modification to the control algorithms is required to accommodate multiple lighting control subzones and the corresponding sensors for providing a more uniform light level across the entire zone. Integrated control of visual and thermal comfort requires the lighting control zone and thermal control zone to coincide with each other. In other words, the area illuminated by a lighting circuit needs to be the same area served by the thermostat. Thus, the original zoning will potentially constrain the applicability of this technology in retrofitting projects. This project demonstrated the technical feasibility of a zone-based integrated control technology. From the simulation results and testbed implementations, up to 60% lighting energy savings in daylit areas relative to a “no-controls” case can easily be achieved. A 20% reduction of whole building energy consumption is also attainable. In the aspect of occupant comfort, the testbed demonstrated the ability to maintain specified light level on the workplane while promptly mitigate daylight glare 90% of the time. The control system also managed to maintain the thermal environment at a comfortable level 90% of the time. The aspect of system scalability was guaranteed by the system architecture design, based on which the testbeds were instantiated. Analysis on the aspect of economic benefit has yielded an about 6-year payback time for a medium-sized building, including the installation of all hardware and software, such as motorized blinds and LED luminaires. The payback time can be significantly reduced if part of the hardware is already in place for retrofitting projects. It needs to be noted that since the payback analysis was partly based on the testbed performance results, it is constrained by the caveats associated with the testbed implementations. The main uncertainty lies in the contribution from the space conditioning energy savings as it was non-trivial to realistically configure a room-size HVAC system for directly extrapolating whole-building HVAC energy savings. It is recommended to further evaluate the developed technology at a larger scale, where the lighting and HVAC energy consumption can be realistically measured at the building level, to more rigorously quantify the performance potentials.« less

Technology to improve quality and accountability.

PubMed

Kay, Jonathan

2006-01-01

A body of evidence has been accumulated to demonstrate that current practice is not sufficiently safe for several stages of central laboratory testing. In particular, while analytical and perianalytical steps that take place within the laboratory are subjected to quality control procedures, this is not the case for several pre- and post-analytical steps. The ubiquitous application of auto-identification technology seems to represent a valuable tool for reducing error rates. A series of projects in Oxford has attempted to improve processes which support several areas of laboratory medicine, including point-of-care testing, blood transfusion, delivery and interpretation of reports, and support of decision-making by clinicians. The key tools are auto-identification, Internet communication technology, process re-engineering, and knowledge management.

[Innovative educational technology in the teaching of propaedeutic of internal diseases].

PubMed

Тusupbekova, К; Bakirova, R; Nursultanova, S

2015-03-01

This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.

A retrospective study of gastric dilatation and gastric dilatation and volvulus in working farm dogs in New Zealand.

PubMed

Hendriks, M M; Hill, K E; Cogger, N; Jones, B R; Cave, N J

2012-05-01

To present findings from a case series of gastric dilatation (GD) or gastric dilatation and volvulus (GDV) in working farm dogs in New Zealand that were examined at veterinary clinics, and to identify possible risk factors for GD or GDV in working farm dogs in New Zealand using a case-control study. This retrospective study included a case-series and a case-control study. The case series analysed information from 62 case records of GD or GDV in working farm dogs seen between August 2004 and September 2009 at 13 veterinary clinics throughout New Zealand. Cases were classified as GD or GDV if the diagnosis was confirmed by radiography, surgery or post-mortem examination. Details of history and treatment, as well as outcomes, were obtained for each case. For the case-control study, records of 41 working farm dogs with GD or GDV (cases) seen between April 2008 and April 2009, and 82 working farm dogs examined because of trauma over the same period and in the same 13 clinics (controls), were used to model the risk factors for GD or GDV. From the case-series study, 40/62 (65%) cases of GD or GDV that were examined and treated at the veterinary clinics returned to work. Of the 41 dogs where the gastric contents were recorded, 25 (61%) had predominantly food or bones in the stomach, and 26/27 dogs had a history of having eaten meat, bones or scavenged a carcass. The case-control study showed that the significant risk factors for GD or GDV, compared with control dogs presenting with trauma, were breed, age and season. The odds that a case of GD or GDV was a Huntaway, after adjusting for age and season, was 19 times higher than the odds a control was a Huntaway. Gender and bodyweight were not identified as risk factors. A high proportion of farm working dogs with GD or GDV were successfully treated by veterinarians. The risk of a case of GD or GDV being a Huntaway was significantly higher than for a dog presenting as a trauma case. However the influences of the season of the year, climatic factors and nutritional factors on the pathogenesis need to be identified before adequate preventative measures can be recommended.

A review of the outcomes of the recommendations made during paediatric telepsychiatry consultations.

PubMed

Boydell, Katherine M; Volpe, Tiziana; Kertes, Angela; Greenberg, Natasha

2007-01-01

Little is known about whether the recommendations made during telepsychiatry are actually implemented. We reviewed 100 telepsychiatry consultations, chosen randomly from a paediatric telepsychiatry programme serving rural communities in Ontario. Treatment recommendations had been made for each case reviewed and up to nine recommendations had been made for a single case. Twenty-seven percent of recommendations revolved around monitoring (10%), changing (9%), starting (4%), continuing (3%) and stopping (1%) medication. Case managers associated with 54 of the cases were interviewed to determine whether the recommendations had been implemented and to examine the barriers and facilitators to implementation. The results indicated that cooperation of both child and parent, clear communication of recommendations, involvement of the school and local health providers, stability of the agencies and availability of services were key components in the successful implementation of recommendations. The matter of technology or technological difficulties acting as a barrier to telepsychiatric consultations was not mentioned by case managers, suggesting that it was not a problem.

Enhancement of Entrepreneurial Leadership: A Case Focusing on a Model of Successful Conflict Management Skills

ERIC Educational Resources Information Center

Leffel, Anita; Hallam, Cory; Darling, John

2012-01-01

The purpose of this paper is to present a case study focusing on a new technology start-up firm, founded by two graduate students, an engineer and a business major, who met during their university studies. The case is timely, in that only ten percent of new product introductions result in a profitable business. The causes of failure are numerous…

HIV quality report cards: impact of case-mix adjustment and statistical methods.

PubMed

Ohl, Michael E; Richardson, Kelly K; Goto, Michihiko; Vaughan-Sarrazin, Mary; Schweizer, Marin L; Perencevich, Eli N

2014-10-15

There will be increasing pressure to publicly report and rank the performance of healthcare systems on human immunodeficiency virus (HIV) quality measures. To inform discussion of public reporting, we evaluated the influence of case-mix adjustment when ranking individual care systems on the viral control quality measure. We used data from the Veterans Health Administration (VHA) HIV Clinical Case Registry and administrative databases to estimate case-mix adjusted viral control for 91 local systems caring for 12 368 patients. We compared results using 2 adjustment methods, the observed-to-expected estimator and the risk-standardized ratio. Overall, 10 913 patients (88.2%) achieved viral control (viral load ≤400 copies/mL). Prior to case-mix adjustment, system-level viral control ranged from 51% to 100%. Seventeen (19%) systems were labeled as low outliers (performance significantly below the overall mean) and 11 (12%) as high outliers. Adjustment for case mix (patient demographics, comorbidity, CD4 nadir, time on therapy, and income from VHA administrative databases) reduced the number of low outliers by approximately one-third, but results differed by method. The adjustment model had moderate discrimination (c statistic = 0.66), suggesting potential for unadjusted risk when using administrative data to measure case mix. Case-mix adjustment affects rankings of care systems on the viral control quality measure. Given the sensitivity of rankings to selection of case-mix adjustment methods-and potential for unadjusted risk when using variables limited to current administrative databases-the HIV care community should explore optimal methods for case-mix adjustment before moving forward with public reporting. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

PubMed

Torrens, George Edward

2018-01-01

Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

Best Case Practices of Technology at Eastern New Mexico University.

ERIC Educational Resources Information Center

DeWitt, Calvin W.; Nutter, Scott; Ayala, Mary; Hall, Debra

This paper presents examples of best case practices of technology use in classes at Eastern New Mexico University (ENMU). The examples include successful and not-so-successful applications, with insights on the overall process of incorporating technology into the classroom. The paper focuses on the authors' experience in languages, business, and…

Technology Utilisation in Elementary Schools in Turkey's Capital: A Case Study

ERIC Educational Resources Information Center

Karaca, Feride; Can, Gulfidan; Yildirim, Soner

2013-01-01

A case study was conducted to explore teachers' current technology use in elementary schools in Ankara, the capital of Turkey. The data were collected through a survey, and participants included 1030 classroom teachers across eight districts. The present study results revealed that significant challenges remain with regard to technology use in the…