Bridging the digital divide by increasing computer and cancer literacy: community technology centers for head-start parents and families.

PubMed

Salovey, Peter; Williams-Piehota, Pamela; Mowad, Linda; Moret, Marta Elisa; Edlund, Denielle; Andersen, Judith

2009-01-01

This article describes the establishment of two community technology centers affiliated with Head Start early childhood education programs focused especially on Latino and African American parents of children enrolled in Head Start. A 6-hour course concerned with computer and cancer literacy was presented to 120 parents and other community residents who earned a free, refurbished, Internet-ready computer after completing the program. Focus groups provided the basis for designing the structure and content of the course and modifying it during the project period. An outcomes-based assessment comparing program participants with 70 nonparticipants at baseline, immediately after the course ended, and 3 months later suggested that the program increased knowledge about computers and their use, knowledge about cancer and its prevention, and computer use including health information-seeking via the Internet. The creation of community computer technology centers requires the availability of secure space, capacity of a community partner to oversee project implementation, and resources of this partner to ensure sustainability beyond core funding.

Computer Program for Steady Transonic Flow over Thin Airfoils by Finite Elements

DTIC Science & Technology

1975-10-01

COMPUTER PROGRAM FOR STEADY JJ TRANSONIC FLOW OVER THIN AIRFOILS BY g FINITE ELEMENTS • *q^^ r ̂ c HUNTSVILLE RESEARCH & ENGINEERING CENTER...jglMMi B Jun’ INC ORGANIMTION NAME ANO ADDRESS Lö^kfteed Missiles & Space Company, Inc. Huntsville Research & Engineering Center,^ Huntsville, Alab...This report was prepared by personnel in the Computational Mechamcs Section of the Lockheed Missiles fc Space Company, Inc.. Huntsville Research

Payload Operations Control Center (POCC). [spacelab flight operations

NASA Technical Reports Server (NTRS)

Shipman, D. L.; Noneman, S. R.; Terry, E. S.

1981-01-01

The Spacelab payload operations control center (POCC) timeline analysis program which is used to provide POCC activity and resource information as a function of mission time is described. This program is fully automated and interactive, and is equipped with tutorial displays. The tutorial displays are sufficiently detailed for use by a program analyst having no computer experience. The POCC timeline analysis program is designed to operate on the VAX/VMS version V2.1 computer system.

Film Library Information Management System.

ERIC Educational Resources Information Center

Minnella, C. Vincent; And Others

The computer program described not only allows the user to determine rental sources for a particular film title quickly, but also to select the least expensive of the sources. This program developed at SUNY Cortland's Sperry Learning Resources Center and Computer Center is designed to maintain accurate data on rental and purchase films in both…

76 FR 50460 - Privacy Act of 1974; Notice of a Computer Matching Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, Department of Defense (DoD). ACTION: Notice of a Computer Matching Program. SUMMARY: Subsection (e)(12) of the Privacy Act of 1974, as amended, (5 U.S.C. 552a) requires agencies to publish advance notice of any proposed or revised computer...

76 FR 77811 - Privacy Act of 1974; Notice of a Computer Matching Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, Department of Defense (DoD). ACTION: Notice of a Computer Matching Program. SUMMARY: Subsection (e)(12) of the Privacy Act of 1974, as amended, (5 U.S.C. 552a) requires agencies to publish advance notice of any proposed or revised computer...

Kevin Regimbal | NREL

Science.gov Websites

-275-4303 Kevin Regimbal oversees NREL's High Performance Computing (HPC) Systems & Operations , engineering, and operations. Kevin is interested in data center design and computing as well as data center integration and optimization. Professional Experience HPC oversight: program manager, project manager, center

Computer Bits: Child Care Center Management Software Buying Guide Update.

ERIC Educational Resources Information Center

Neugebauer, Roger

1987-01-01

Compares seven center management programs used for basic financial and data management tasks such as accounting, payroll and attendance records, and mailing lists. Describes three other specialized programs and gives guidelines for selecting the best software for a particular center. (NH)

Computer program for determining mass properties of a rigid structure

NASA Technical Reports Server (NTRS)

Hull, R. A.; Gilbert, J. L.; Klich, P. J.

1978-01-01

A computer program was developed for the rapid computation of the mass properties of complex structural systems. The program uses rigid body analyses and permits differences in structural material throughout the total system. It is based on the premise that complex systems can be adequately described by a combination of basic elemental shapes. Simple geometric data describing size and location of each element and the respective material density or weight of each element were the only required input data. From this minimum input, the program yields system weight, center of gravity, moments of inertia and products of inertia with respect to mutually perpendicular axes through the system center of gravity. The program also yields mass properties of the individual shapes relative to component axes.

NASA Lewis Research Center/university graduate research program on engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1985-01-01

NASA Lewis Research Center established a graduate research program in support of the Engine Structures Research activities. This graduate research program focuses mainly on structural and dynamics analyses, computational mechanics, mechanics of composites and structural optimization. The broad objectives of the program, the specific program, the participating universities and the program status are briefly described.

NASA Lewis Research Center/University Graduate Research Program on Engine Structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1985-01-01

NASA Lewis Research Center established a graduate research program in support of the Engine Structures Research activities. This graduate research program focuses mainly on structural and dynamics analyses, computational mechanics, mechanics of composites and structural optimization. The broad objectives of the program, the specific program, the participating universities and the program status are briefly described.

UC Merced Center for Computational Biology Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colvin, Michael; Watanabe, Masakatsu

Final report for the UC Merced Center for Computational Biology. The Center for Computational Biology (CCB) was established to support multidisciplinary scientific research and academic programs in computational biology at the new University of California campus in Merced. In 2003, the growing gap between biology research and education was documented in a report from the National Academy of Sciences, Bio2010 Transforming Undergraduate Education for Future Research Biologists. We believed that a new type of biological sciences undergraduate and graduate programs that emphasized biological concepts and considered biology as an information science would have a dramatic impact in enabling the transformationmore » of biology. UC Merced as newest UC campus and the first new U.S. research university of the 21st century was ideally suited to adopt an alternate strategy - to create a new Biological Sciences majors and graduate group that incorporated the strong computational and mathematical vision articulated in the Bio2010 report. CCB aimed to leverage this strong commitment at UC Merced to develop a new educational program based on the principle of biology as a quantitative, model-driven science. Also we expected that the center would be enable the dissemination of computational biology course materials to other university and feeder institutions, and foster research projects that exemplify a mathematical and computations-based approach to the life sciences. As this report describes, the CCB has been successful in achieving these goals, and multidisciplinary computational biology is now an integral part of UC Merced undergraduate, graduate and research programs in the life sciences. The CCB began in fall 2004 with the aid of an award from U.S. Department of Energy (DOE), under its Genomes to Life program of support for the development of research and educational infrastructure in the modern biological sciences. This report to DOE describes the research and academic programs made possible by the CCB from its inception until August, 2010, at the end of the final extension. Although DOE support for the center ended in August 2010, the CCB will continue to exist and support its original objectives. The research and academic programs fostered by the CCB have led to additional extramural funding from other agencies, and we anticipate that CCB will continue to provide support for quantitative and computational biology program at UC Merced for many years to come. Since its inception in fall 2004, CCB research projects have continuously had a multi-institutional collaboration with Lawrence Livermore National Laboratory (LLNL), and the National Center for Supercomputing Applications at the University of Illinois at Urbana-Champaign, as well as individual collaborators at other sites. CCB affiliated faculty cover a broad range of computational and mathematical research including molecular modeling, cell biology, applied math, evolutional biology, bioinformatics, etc. The CCB sponsored the first distinguished speaker series at UC Merced, which had an important role is spreading the word about the computational biology emphasis at this new campus. One of CCB's original goals is to help train a new generation of biologists who bridge the gap between the computational and life sciences. To archive this goal, by summer 2006, a new program - summer undergraduate internship program, have been established under CCB to train the highly mathematical and computationally intensive Biological Science researchers. By the end of summer 2010, 44 undergraduate students had gone through this program. Out of those participants, 11 students have been admitted to graduate schools and 10 more students are interested in pursuing graduate studies in the sciences. The center is also continuing to facilitate the development and dissemination of undergraduate and graduate course materials based on the latest research in computational biology.« less

Space shuttle solid rocket booster recovery system definition. Volume 3: SRB water impact loads computer program, user's manual

NASA Technical Reports Server (NTRS)

1973-01-01

This user's manual describes the FORTRAN IV computer program developed to compute the total vertical load, normal concentrated pressure loads, and the center of pressure of typical SRB water impact slapdown pressure distributions specified in the baseline configuration. The program prepares the concentrated pressure load information in punched card format suitable for input to the STAGS computer program. In addition, the program prepares for STAGS input the inertia reacting loads to the slapdown pressure distributions.

HPCCP/CAS Workshop Proceedings 1998

NASA Technical Reports Server (NTRS)

Schulbach, Catherine; Mata, Ellen (Editor); Schulbach, Catherine (Editor)

1999-01-01

This publication is a collection of extended abstracts of presentations given at the HPCCP/CAS (High Performance Computing and Communications Program/Computational Aerosciences Project) Workshop held on August 24-26, 1998, at NASA Ames Research Center, Moffett Field, California. The objective of the Workshop was to bring together the aerospace high performance computing community, consisting of airframe and propulsion companies, independent software vendors, university researchers, and government scientists and engineers. The Workshop was sponsored by the HPCCP Office at NASA Ames Research Center. The Workshop consisted of over 40 presentations, including an overview of NASA's High Performance Computing and Communications Program and the Computational Aerosciences Project; ten sessions of papers representative of the high performance computing research conducted within the Program by the aerospace industry, academia, NASA, and other government laboratories; two panel sessions; and a special presentation by Mr. James Bailey.

77 FR 14340 - Proposed Information Collection; Comment Request; Broadband Technology Opportunities Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... (PPRs) to capture quarterly and annual reports for each project type (Infrastructure, Public Computer... Information Collection; Comment Request; Broadband Technology Opportunities Program (BTOP) Quarterly and..., which included competitive grants to expand public computer center capacity and innovative programs to...

DIALOG: An executive computer program for linking independent programs

NASA Technical Reports Server (NTRS)

Glatt, C. R.; Hague, D. S.; Watson, D. A.

1973-01-01

A very large scale computer programming procedure called the DIALOG Executive System has been developed for the Univac 1100 series computers. The executive computer program, DIALOG, controls the sequence of execution and data management function for a library of independent computer programs. Communication of common information is accomplished by DIALOG through a dynamically constructed and maintained data base of common information. The unique feature of the DIALOG Executive System is the manner in which computer programs are linked. Each program maintains its individual identity and as such is unaware of its contribution to the large scale program. This feature makes any computer program a candidate for use with the DIALOG Executive System. The installation and use of the DIALOG Executive System are described at Johnson Space Center.

Voltage profile program for the Kennedy Space Center electric power distribution system

NASA Technical Reports Server (NTRS)

1976-01-01

The Kennedy Space Center voltage profile program computes voltages at all busses greater than 1 Kv in the network under various conditions of load. The computation is based upon power flow principles and utilizes a Newton-Raphson iterative load flow algorithm. Power flow conditions throughout the network are also provided. The computer program is designed for both steady state and transient operation. In the steady state mode, automatic tap changing of primary distribution transformers is incorporated. Under transient conditions, such as motor starts etc., it is assumed that tap changing is not accomplished so that transformer secondary voltage is allowed to sag.

A FRAMEWORK FOR A COMPUTATIONAL TOXICOLOGY RESEARCH PROGRAM IN ORD

EPA Science Inventory

"A Framework for a Computational Toxicology Research Program in ORD" was drafted by a Technical Writing Team having representatives from all of ORD's Laboratories and Centers. The document describes a framework for the development of an program within ORD to utilize approaches d...

After-Hours Science: Microchips and Onion Dip.

ERIC Educational Resources Information Center

Brugger, Steve

1984-01-01

Computer programs were developed for a science center nutrition exhibit. The exhibit was recognized by the National Science Teachers Association Search for Excellence in Science Education as an outstanding science program. The computer programs (Apple II) and their use in the exhibit are described. (BC)

Evaluation of Rankine cycle air conditioning system hardware by computer simulation

NASA Technical Reports Server (NTRS)

Healey, H. M.; Clark, D.

1978-01-01

A computer program for simulating the performance of a variety of solar powered Rankine cycle air conditioning system components (RCACS) has been developed. The computer program models actual equipment by developing performance maps from manufacturers data and is capable of simulating off-design operation of the RCACS components. The program designed to be a subroutine of the Marshall Space Flight Center (MSFC) Solar Energy System Analysis Computer Program 'SOLRAD', is a complete package suitable for use by an occasional computer user in developing performance maps of heating, ventilation and air conditioning components.

Computer Center: Software Review.

ERIC Educational Resources Information Center

Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

1988-01-01

Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

Development of Interactive Computer Programs To Help Students Transfer Basic Skills to College Level Science and Behavioral Science Courses.

ERIC Educational Resources Information Center

Mikulecky, Larry

Interactive computer programs, developed at Indiana University's Learning Skills Center, were designed to model effective strategies for reading biology and psychology textbooks. For each subject area, computer programs and textbook passages were used to instruct and model for students how to identify key concepts, compare and contrast concepts,…

Computer Technology for Industry

NASA Technical Reports Server (NTRS)

1979-01-01

In this age of the computer, more and more business firms are automating their operations for increased efficiency in a great variety of jobs, from simple accounting to managing inventories, from precise machining to analyzing complex structures. In the interest of national productivity, NASA is providing assistance both to longtime computer users and newcomers to automated operations. Through a special technology utilization service, NASA saves industry time and money by making available already developed computer programs which have secondary utility. A computer program is essentially a set of instructions which tells the computer how to produce desired information or effect by drawing upon its stored input. Developing a new program from scratch can be costly and time-consuming. Very often, however, a program developed for one purpose can readily be adapted to a totally different application. To help industry take advantage of existing computer technology, NASA operates the Computer Software Management and Information Center (COSMIC)(registered TradeMark),located at the University of Georgia. COSMIC maintains a large library of computer programs developed for NASA, the Department of Defense, the Department of Energy and other technology-generating agencies of the government. The Center gets a continual flow of software packages, screens them for adaptability to private sector usage, stores them and informs potential customers of their availability.

Design controls for large order systems

NASA Technical Reports Server (NTRS)

Doane, George B., III

1991-01-01

The output of this task will be a program plan which will delineate how MSFC will support and implement its portion of the Inter-Center Computational Controls Program Plan. Another output will be the results of looking at various multibody/multidegree of freedom computer programs in various environments.

Curriculum Development--Learning Center. Final Report.

ERIC Educational Resources Information Center

Seltzer, Madeline

A project at Manor Junior College, Pennsylvania, developed further and implemented the tutoring programs in the Learning Center and integrated them with the Computer Tutorials Program. The objective was to increase retention and graduation rates and academic success of students enrolled in vocational programs. The reading, writing, and peer tutor…

A Serious Game of Success

ERIC Educational Resources Information Center

Nikirk, Martin

2006-01-01

This article discusses a computer game design and animation pilot at Washington County Technical High School as part of the advanced computer applications completer program. The focus of the instructional program is to teach students the 16 components of computer game design through a team-centered, problem-solving instructional format. Among…

A Computerized Cataloging System for an Outdoor Program Library or Resource Center.

ERIC Educational Resources Information Center

Watters, Ron

The Outdoor Resource Library Cataloging System is a computer software program designed primarily for outdoor programs with small to medium-sized resource centers. The software is free to nonprofit organizations and is available from the Idaho State University Outdoor Program. The software is used to construct a database of library materials, which…

PCs: Key to the Future. Business Center Provides Sound Skills and Good Attitudes.

ERIC Educational Resources Information Center

Pay, Renee W.

1991-01-01

The Advanced Computing/Management Training Program at Jordan Technical Center (Sandy, Utah) simulates an automated office to teach five sets of skills: computer architecture and operating systems, word processing, data processing, communications skills, and management principles. (SK)

Ames Research Center publications: A continuing bibliography, 1980

NASA Technical Reports Server (NTRS)

1981-01-01

This bibliography lists formal NASA publications, journal articles, books, chapters of books, patents, contractor reports, and computer programs that were issued by Ames Research Center and indexed by Scientific and Technical Aerospace Reports, Limited Scientific and Technical Aerospace Reports, International Aerospace Abstracts, and Computer Program Abstracts in 1980. Citations are arranged by directorate, type of publication, and NASA accession numbers. Subject, personal author, corporate source, contract number, and report/accession number indexes are provided.

NASA Langley Research Center outreach in astronautical education

NASA Technical Reports Server (NTRS)

Duberg, J. E.

1976-01-01

The Langley Research Center has traditionally maintained an active relationship with the academic community, especially at the graduate level, to promote the Center's research program and to make graduate education available to its staff. Two new institutes at the Center - the Joint Institute for Acoustics and Flight Sciences, and the Institute for Computer Applications - are discussed. Both provide for research activity at the Center by university faculties. The American Society of Engineering Education Summer Faculty Fellowship Program and the NASA-NRC Postdoctoral Resident Research Associateship Program are also discussed.

Illustrative Computer Programming for Libraries; Selected Examples for Information Specialists. Contributions in Librarianship and Information Science, No. 12.

ERIC Educational Resources Information Center

Davis, Charles H.

Intended for teaching applications programing for libraries and information centers, this volume is a graded workbook or text supplement containing typical practice problems, suggested solutions, and brief analyses which emphasize programing efficiency. The computer language used is Programing Language/One (PL/1) because it adapts readily to…

Transportation Research and Analysis Computing Center (TRACC) Year 6 Quarter 4 Progress Report

DOT National Transportation Integrated Search

2013-03-01

Argonne National Laboratory initiated a FY2006-FY2009 multi-year program with the US Department of Transportation (USDOT) on October 1, 2006, to establish the Transportation Research and Analysis Computing Center (TRACC). As part of the TRACC project...

The Operation of a Specialized Scientific Information and Data Analysis Center With Computer Base and Associated Communications Network.

ERIC Educational Resources Information Center

Cottrell, William B.; And Others

The Nuclear Safety Information Center (NSIC) is a highly sophisticated scientific information center operated at Oak Ridge National Laboratory (ORNL) for the U.S. Atomic Energy Commission. Its information file, which consists of both data and bibliographic information, is computer stored and numerous programs have been developed to facilitate the…

A real-time digital computer program for the simulation of a single rotor helicopter

NASA Technical Reports Server (NTRS)

Houck, J. A.; Gibson, L. H.; Steinmetz, G. G.

1974-01-01

A computer program was developed for the study of a single-rotor helicopter on the Langley Research Center real-time digital simulation system. Descriptions of helicopter equations and data, program subroutines (including flow charts and listings), real-time simulation system routines, and program operation are included. Program usage is illustrated by standard check cases and a representative flight case.

ICASE Workshop on Programming Computational Grids

DTIC Science & Technology

2001-09-01

ICASE Workshop on Programming Computational Grids Thomas M. Eidson and Merrell L. Patrick ICASE, Hampton, Virginia ICASE NASA Langley Research Center...Computational Grids Contract Number Grant Number Program Element Number Author(s) Thomas M. Eidson and Merrell L. Patrick Project Number Task Number...clear that neither group fully understood the ideas and problems of the other. It was also clear that neither group is given the time and support to

Kennedy Space Center exercise program

NASA Technical Reports Server (NTRS)

Hoffman, Cristy

1993-01-01

The Kennedy Space Center (KSC) Fitness Program began in Feb. 1993. The program is managed by the Biomedical Operations and Research Office and operated by the Bionetics Corporation. The facilities and programs are offered to civil servants, all contractors, temporary duty assignment (TDY) participants, and retirees. All users must first have a medical clearance. A computer-generated check-in system is used to monitor participant usage. Various aspects of the program are discussed.

An IBM 370 assembly language program verifier

NASA Technical Reports Server (NTRS)

Maurer, W. D.

1977-01-01

The paper describes a program written in SNOBOL which verifies the correctness of programs written in assembly language for the IBM 360 and 370 series of computers. The motivation for using assembly language as a source language for a program verifier was the realization that many errors in programs are caused by misunderstanding or ignorance of the characteristics of specific computers. The proof of correctness of a program written in assembly language must take these characteristics into account. The program has been compiled and is currently running at the Center for Academic and Administrative Computing of The George Washington University.

Programming microphysiological systems for children's health protection (SEBM meeting)

EPA Science Inventory

Presentation: Programming microphysiological systems for children’s health protectionAuthors: Knudsen1 T, Klieforth2 B, and Slikker3 W Jr.1National Center for Computational Toxicology/EPA, Research Triangle Park NC2National Center for Environmental Research/EPA, Washington DC3Nat...

IMP: Interactive mass properties program. Volume 1: Program description

NASA Technical Reports Server (NTRS)

Stewart, W. A.

1976-01-01

A method of computing a weights and center of gravity analysis of a flight vehicle using interactive graphical capabilities of the Adage 340 computer is described. The equations used to calculate area, volume, and mass properties are based on elemental surface characteristics. The input/output methods employ the graphic support of the Adage computer. Several interactive program options are available for analyzing the mass properties of a vehicle. These options are explained.

Computer systems and software engineering

NASA Technical Reports Server (NTRS)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

High-End Scientific Computing

EPA Pesticide Factsheets

EPA uses high-end scientific computing, geospatial services and remote sensing/imagery analysis to support EPA's mission. The Center for Environmental Computing (CEC) assists the Agency's program offices and regions to meet staff needs in these areas.

Activity: Computer Talk.

ERIC Educational Resources Information Center

Clearing: Nature and Learning in the Pacific Northwest, 1985

1985-01-01

Presents an activity in which students create a computer program capable of recording and projecting paper use at school. Includes instructional strategies and background information such as requirements for pounds of paper/tree, energy needs, water consumption, and paper value at the recycling center. A sample program is included. (DH)

Blindness and Computer Networking at iTEC [Information Technology Education Center].

ERIC Educational Resources Information Center

Goins, Shannon

A new program to train blind and visually impaired individuals to design and run a computer network has been developed. The program offers the Microsoft Certified Systems Engineer (MCSE) training. The program, which began in February 2001, recently graduated its first class of students, who are currently completing 1-month internships to complete…

NASA Space Engineering Research Center for VLSI systems design

NASA Technical Reports Server (NTRS)

1991-01-01

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

Computer Training for Seniors: An Academic-Community Partnership

ERIC Educational Resources Information Center

Sanders, Martha J.; O'Sullivan, Beth; DeBurra, Katherine; Fedner, Alesha

2013-01-01

Computer technology is integral to information retrieval, social communication, and social interaction. However, only 47% of seniors aged 65 and older use computers. The purpose of this study was to determine the impact of a client-centered computer program on computer skills, attitudes toward computer use, and generativity in novice senior…

[AERA. Dream machines and computing practices at the Mathematical Center].

PubMed

Alberts, Gerard; De Beer, Huub T

2008-01-01

Dream machines may be just as effective as the ones materialised. Their symbolic thrust can be quite powerful. The Amsterdam 'Mathematisch Centrum' (Mathematical Center), founded February 11, 1946, created a Computing Department in an effort to realise its goal of serving society. When Aad van Wijngaarden was appointed as head of the Computing Department, however, he claimed space for scientific research and computer construction, next to computing as a service. Still, the computing service following the five stage style of Hartree's numerical analysis remained a dominant characteristic of the work of the Computing Department. The high level of ambition held by Aad van Wijngaarden lead to ever renewed projections of big automatic computers, symbolised by the never-built AERA. Even a machine that was actually constructed, the ARRA which followed A.D. Booth's design of the ARC, never made it into real operation. It did serve Van Wijngaarden to bluff his way into the computer age by midsummer 1952. Not until January 1954 did the computing department have a working stored program computer, which for reasons of policy went under the same name: ARRA. After just one other machine, the ARMAC, had been produced, a separate company, Electrologica, was set up for the manufacture of computers, which produced the rather successful X1 computer. The combination of ambition and absence of a working machine lead to a high level of work on programming, way beyond the usual ideas of libraries of subroutines. Edsger W. Dijkstra in particular led the way to an emphasis on the duties of the programmer within the pattern of numerical analysis. Programs generating programs, known elsewhere as autocoding systems, were at the 'Mathematisch Centrum' called 'superprograms'. Practical examples were usually called a 'complex', in Dutch, where in English one might say 'system'. Historically, this is where software begins. Dekker's matrix complex, Dijkstra's interrupt system, Dijkstra and Zonneveld's ALGOL compiler--which for housekeeping contained 'the complex'--were actual examples of such super programs. In 1960 this compiler gave the Mathematical Center a leading edge in the early development of software.

Senior Computational Scientist | Center for Cancer Research

Cancer.gov

The Basic Science Program (BSP) pursues independent, multidisciplinary research in basic and applied molecular biology, immunology, retrovirology, cancer biology, and human genetics. Research efforts and support are an integral part of the Center for Cancer Research (CCR) at the Frederick National Laboratory for Cancer Research (FNLCR). The Cancer & Inflammation Program (CIP),

US Department of Energy High School Student Supercomputing Honors Program: A follow-up assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-01-01

The US DOE High School Student Supercomputing Honors Program was designed to recognize high school students with superior skills in mathematics and computer science and to provide them with formal training and experience with advanced computer equipment. This document reports on the participants who attended the first such program, which was held at the National Magnetic Fusion Energy Computer Center at the Lawrence Livermore National Laboratory (LLNL) during August 1985.

Pulmonary Testing Laboratory Computer Application

PubMed Central

Johnson, Martin E.

1980-01-01

An interactive computer application reporting patient pulmonary function data has been developed by Washington, D.C. VA Medical Center staff. A permanent on-line data base of patient demographics, lung capacity, flows, diffusion, arterial blood gases and physician interpretation is maintained by a minicomputer at the hospital. A user oriented application program resulted from development in concert with the clinical users. Rapid program development resulted from employing a newly developed time saving technique that has found wide application at other VA Medical Centers. Careful attention to user interaction has resulted in an application program requiring little training and which has been satisfactorily used by a number of clinicians.

MSFC crack growth analysis computer program, version 2 (users manual)

NASA Technical Reports Server (NTRS)

Creager, M.

1976-01-01

An updated version of the George C. Marshall Space Flight Center Crack Growth Analysis Program is described. The updated computer program has significantly expanded capabilities over the original one. This increased capability includes an extensive expansion of the library of stress intensity factors, plotting capability, increased design iteration capability, and the capability of performing proof test logic analysis. The technical approaches used within the computer program are presented, and the input and output formats and options are described. Details of the stress intensity equations, example data, and example problems are presented.

InfoMall: An Innovative Strategy for High-Performance Computing and Communications Applications Development.

ERIC Educational Resources Information Center

Mills, Kim; Fox, Geoffrey

1994-01-01

Describes the InfoMall, a program led by the Northeast Parallel Architectures Center (NPAC) at Syracuse University (New York). The InfoMall features a partnership of approximately 24 organizations offering linked programs in High Performance Computing and Communications (HPCC) technology integration, software development, marketing, education and…

Computer software management, evaluation, and dissemination

NASA Technical Reports Server (NTRS)

1983-01-01

The activities of the Computer Software Management and Information Center involving the collection, processing, and distribution of software developed under the auspices of NASA and certain other federal agencies are reported. Program checkout and evaluation, inventory control, customer services and marketing, dissemination, program maintenance, and special development tasks are discussed.

Computers and Technological Forecasting

ERIC Educational Resources Information Center

Martino, Joseph P.

1971-01-01

Forecasting is becoming increasingly automated, thanks in large measure to the computer. It is now possible for a forecaster to submit his data to a computation center and call for the appropriate program. (No knowledge of statistics is required.) (Author)

FIT: Computer Program that Interactively Determines Polynomial Equations for Data which are a Function of Two Independent Variables

NASA Technical Reports Server (NTRS)

Arbuckle, P. D.; Sliwa, S. M.; Roy, M. L.; Tiffany, S. H.

1985-01-01

A computer program for interactively developing least-squares polynomial equations to fit user-supplied data is described. The program is characterized by the ability to compute the polynomial equations of a surface fit through data that are a function of two independent variables. The program utilizes the Langley Research Center graphics packages to display polynomial equation curves and data points, facilitating a qualitative evaluation of the effectiveness of the fit. An explanation of the fundamental principles and features of the program, as well as sample input and corresponding output, are included.

Synergies and Distinctions between Computational Disciplines in Biomedical Research: Perspective from the Clinical and Translational Science Award Programs

PubMed Central

Bernstam, Elmer V.; Hersh, William R.; Johnson, Stephen B.; Chute, Christopher G.; Nguyen, Hien; Sim, Ida; Nahm, Meredith; Weiner, Mark; Miller, Perry; DiLaura, Robert P.; Overcash, Marc; Lehmann, Harold P.; Eichmann, David; Athey, Brian D.; Scheuermann, Richard H.; Anderson, Nick; Starren, Justin B.; Harris, Paul A.; Smith, Jack W.; Barbour, Ed; Silverstein, Jonathan C.; Krusch, David A.; Nagarajan, Rakesh; Becich, Michael J.

2010-01-01

Clinical and translational research increasingly requires computation. Projects may involve multiple computationally-oriented groups including information technology (IT) professionals, computer scientists and biomedical informaticians. However, many biomedical researchers are not aware of the distinctions among these complementary groups, leading to confusion, delays and sub-optimal results. Although written from the perspective of clinical and translational science award (CTSA) programs within academic medical centers, the paper addresses issues that extend beyond clinical and translational research. The authors describe the complementary but distinct roles of operational IT, research IT, computer science and biomedical informatics using a clinical data warehouse as a running example. In general, IT professionals focus on technology. The authors distinguish between two types of IT groups within academic medical centers: central or administrative IT (supporting the administrative computing needs of large organizations) and research IT (supporting the computing needs of researchers). Computer scientists focus on general issues of computation such as designing faster computers or more efficient algorithms, rather than specific applications. In contrast, informaticians are concerned with data, information and knowledge. Biomedical informaticians draw on a variety of tools, including but not limited to computers, to solve information problems in health care and biomedicine. The paper concludes with recommendations regarding administrative structures that can help to maximize the benefit of computation to biomedical research within academic health centers. PMID:19550198

a Recursive Approach to Compute Normal Forms

NASA Astrophysics Data System (ADS)

HSU, L.; MIN, L. J.; FAVRETTO, L.

2001-06-01

Normal forms are instrumental in the analysis of dynamical systems described by ordinary differential equations, particularly when singularities close to a bifurcation are to be characterized. However, the computation of a normal form up to an arbitrary order is numerically hard. This paper focuses on the computer programming of some recursive formulas developed earlier to compute higher order normal forms. A computer program to reduce the system to its normal form on a center manifold is developed using the Maple symbolic language. However, it should be stressed that the program relies essentially on recursive numerical computations, while symbolic calculations are used only for minor tasks. Some strategies are proposed to save computation time. Examples are presented to illustrate the application of the program to obtain high order normalization or to handle systems with large dimension.

The SURE reliability analysis program

NASA Technical Reports Server (NTRS)

Butler, R. W.

1986-01-01

The SURE program is a new reliability tool for ultrareliable computer system architectures. The program is based on computational methods recently developed for the NASA Langley Research Center. These methods provide an efficient means for computing accurate upper and lower bounds for the death state probabilities of a large class of semi-Markov models. Once a semi-Markov model is described using a simple input language, the SURE program automatically computes the upper and lower bounds on the probability of system failure. A parameter of the model can be specified as a variable over a range of values directing the SURE program to perform a sensitivity analysis automatically. This feature, along with the speed of the program, makes it especially useful as a design tool.

The SURE Reliability Analysis Program

NASA Technical Reports Server (NTRS)

Butler, R. W.

1986-01-01

The SURE program is a new reliability analysis tool for ultrareliable computer system architectures. The program is based on computational methods recently developed for the NASA Langley Research Center. These methods provide an efficient means for computing accurate upper and lower bounds for the death state probabilities of a large class of semi-Markov models. Once a semi-Markov model is described using a simple input language, the SURE program automatically computes the upper and lower bounds on the probability of system failure. A parameter of the model can be specified as a variable over a range of values directing the SURE program to perform a sensitivity analysis automatically. This feature, along with the speed of the program, makes it especially useful as a design tool.

Some propulsion system noise data handling conventions and computer programs used at the Lewis Research Center

NASA Technical Reports Server (NTRS)

Montegani, F. J.

1974-01-01

Methods of handling one-third-octave band noise data originating from the outdoor full-scale fan noise facility and the engine acoustic facility at the Lewis Research Center are presented. Procedures for standardizing, retrieving, extrapolating, and reporting these data are explained. Computer programs are given which are used to accomplish these and other noise data analysis tasks. This information is useful as background for interpretation of data from these facilities appearing in NASA reports and can aid data exchange by promoting standardization.

Computer Operations Study of Reservoir Operations for Six Mississippi River Headwaters Dams. Appendix A.

DTIC Science & Technology

1982-06-01

p*A C.._ _ __ _ _ A, d.tibutiou is unhimta 4 iit 84~ L0 TABLE OF CONTENTS APPENDIX SCOPE OF WORK B MERGE AND COST PROGRAM DOCUMENTATION C FATSCO... PROGRAM TO COMPUTE TIME SERIES FREQUENCY RELATIONSHIPS D HEC-DSS - TIME SERIES DATA FILE MANAGEMENT SYSTEM E PLAN 1 -TIM SERIES DATA PLOTS AND ANNUAL...University of Minnesota, utilized an early version of the Hydrologic Engineering * Center’s (HEC) EEC-5c Computer Program . EEC is a Corps of Engineers

Proof test of the computer program BUCKY for plasticity problems

NASA Technical Reports Server (NTRS)

Smith, James P.

1994-01-01

A theoretical equation describing the elastic-plastic deformation of a cantilever beam subject to a constant pressure is developed. The theoretical result is compared numerically to the computer program BUCKY for the case of an elastic-perfectly plastic specimen. It is shown that the theoretical and numerical results compare favorably in the plastic range. Comparisons are made to another research code to further validate the BUCKY results. This paper serves as a quality test for the computer program BUCKY developed at NASA Johnson Space Center.

Acoustic Source Bearing Estimation (ASBE) computer program development

NASA Technical Reports Server (NTRS)

Wiese, Michael R.

1987-01-01

A new bearing estimation algorithm (Acoustic Source Analysis Technique - ASAT) and an acoustic analysis computer program (Acoustic Source Bearing Estimation - ASBE) are described, which were developed by Computer Sciences Corporation for NASA Langley Research Center. The ASBE program is used by the Acoustics Division/Applied Acoustics Branch and the Instrument Research Division/Electro-Mechanical Instrumentation Branch to analyze acoustic data and estimate the azimuths from which the source signals radiated. Included are the input and output from a benchmark test case.

Patient-centered computing: can it curb malpractice risk?

PubMed

Bartlett, E E

1993-01-01

The threat of a medical malpractice suit represents a major cause of career dissatisfaction for American physicians. Patient-centered computing may improve physician-patient communications, thereby reducing liability risk. This review describes programs that have sought to enhance patient education and involvement pertaining to 5 major categories of malpractice lawsuits: Diagnosis, medications, obstetrics, surgery, and treatment errors.

Patient-centered computing: can it curb malpractice risk?

PubMed Central

Bartlett, E. E.

1993-01-01

The threat of a medical malpractice suit represents a major cause of career dissatisfaction for American physicians. Patient-centered computing may improve physician-patient communications, thereby reducing liability risk. This review describes programs that have sought to enhance patient education and involvement pertaining to 5 major categories of malpractice lawsuits: Diagnosis, medications, obstetrics, surgery, and treatment errors. PMID:8130563

PSYCHOLOGICAL RESEARCH IN CLASSROOM LEARNING, REPORT ON A CONFERENCE (BROMWOODS RESIDENTIAL CENTER, WASHINGTON UNIVERSITY, ST. LOUIS, MO.).

ERIC Educational Resources Information Center

WIENTGE, KING M., ED.; AND OTHERS

PAPERS WERE PRESENTED AT A CONFERENCE ON CLASSROOM LEARNING ON SUCH TOPICS AS PROGRAM DESIGN, TESTING, AND OTHER EVALUATION TECHNIQUES, COMPUTER ASSISTED INSTRUCTION, PROGRAMED INSTRUCTION, SIMULATION, PACING, AND RETENTION. SEVERAL TREATED MILITARY TRAINING, ADULT LEARNING, AND ADULT-CENTERED CLASSROOM TECHNIQUES. IN ONE PAPER, THE SYSTEMS…

Center for Aeronautics and Space Information Sciences

NASA Technical Reports Server (NTRS)

Flynn, Michael J.

1992-01-01

This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets.

CDC 7600 LTSS programming stratagens: preparing your first production code for the Livermore Timesharing System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fong, K. W.

1977-08-15

This report deals with some techniques in applied programming using the Livermore Timesharing System (LTSS) on the CDC 7600 computers at the National Magnetic Fusion Energy Computer Center (NMFECC) and the Lawrence Livermore Laboratory Computer Center (LLLCC or Octopus network). This report is based on a document originally written specifically about the system as it is implemented at NMFECC but has been revised to accommodate differences between LLLCC and NMFECC implementations. Topics include: maintaining programs, debugging, recovering from system crashes, and using the central processing unit, memory, and input/output devices efficiently and economically. Routines that aid in these procedures aremore » mentioned. The companion report, UCID-17556, An LTSS Compendium, discusses the hardware and operating system and should be read before reading this report.« less

Investigating Impact Metrics for Performance for the US EPA National Center for Computational Toxicology (ACS Fall meeting)

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program integrates advances in biology, chemistry, and computer science to help prioritize chemicals for further research based on potential human health risks. This work involves computational and data drive...

Prediction of Combustion Gas Deposit Compositions

NASA Technical Reports Server (NTRS)

Kohl, F. J.; Mcbride, B. J.; Zeleznik, F. J.; Gordon, S.

1985-01-01

Demonstrated procedure used to predict accurately chemical compositions of complicated deposit mixtures. NASA Lewis Research Center's Computer Program for Calculation of Complex Chemical Equilibrium Compositions (CEC) used in conjunction with Computer Program for Calculation of Ideal Gas Thermodynamic Data (PAC) and resulting Thermodynamic Data Base (THDATA) to predict deposit compositions from metal or mineral-seeded combustion processes.

Marine Jet

NASA Technical Reports Server (NTRS)

1978-01-01

The marine turbine pump pictured is the Jacuzzi 12YJ, a jet propulsion system for pleasure or commercial boating. Its development was aided by a NASA computer program made available by the Computer Software Management and Information Center (COSMIC) at the University of Georgia. The manufacturer, Jacuzzi Brothers, Incorporated, Little Rock, Arkansas, used COSMIC'S Computer Program for Predicting Turbopump Inducer Loading, which enabled substantial savings in development time and money through reduction of repetitive testing.

Delivering an Informational Hub for Data at the National Center for Computational Toxicology (ACS Spring Meeting) 7 of 7

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program integrates advances in biology, chemistry, and computer science to help prioritize chemicals for further research based on potential human health risks. This work involves computational and data drive...

CESDIS

NASA Technical Reports Server (NTRS)

1994-01-01

CESDIS, the Center of Excellence in Space Data and Information Sciences was developed jointly by NASA, Universities Space Research Association (USRA), and the University of Maryland in 1988 to focus on the design of advanced computing techniques and data systems to support NASA Earth and space science research programs. CESDIS is operated by USRA under contract to NASA. The Director, Associate Director, Staff Scientists, and administrative staff are located on-site at NASA's Goddard Space Flight Center in Greenbelt, Maryland. The primary CESDIS mission is to increase the connection between computer science and engineering research programs at colleges and universities and NASA groups working with computer applications in Earth and space science. The 1993-94 CESDIS year included a broad range of computer science research applied to NASA problems. This report provides an overview of these research projects and programs as well as a summary of the various other activities of CESDIS in support of NASA and the university research community, We have had an exciting and challenging year.

Center for Efficient Exascale Discretizations Software Suite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolev, Tzanio; Dobrev, Veselin; Tomov, Vladimir

The CEED Software suite is a collection of generally applicable software tools focusing on the following computational motives: PDE discretizations on unstructured meshes, high-order finite element and spectral element methods and unstructured adaptive mesh refinement. All of this software is being developed as part of CEED, a co-design Center for Efficient Exascale Discretizations, within DOE's Exascale Computing Project (ECP) program.

CNC Turning Center Operations and Prove Out. Computer Numerical Control Operator/Programmer. 444-334.

ERIC Educational Resources Information Center

Skowronski, Steven D.

This student guide provides materials for a course designed to instruct the student in the recommended procedures used when setting up tooling and verifying part programs for a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 discusses course content and reviews and demonstrates set-up procedures…

Pilot Project in Computer Assisted Instruction for Adult Basic Education Students. Adult Learning Centers, the Adult Program, 1982-83.

ERIC Educational Resources Information Center

Buckley, Elizabeth; Johnston, Peter

In February 1977, computer assisted instruction (CAI) was introducted to the Great Neck Adult Learning Centers (GNALC) to promote greater cognitive and affective growth of educationally disadvantaged adults. The project expanded to include not only adult basic education (ABE) students studying in the learning laboratory, but also ABE students…

Computer program documentation modified version of the JA70 aerodynamic heating computer program H800 (MINIVER with a DISSPLA plot package

NASA Technical Reports Server (NTRS)

Olmedo, L.

1980-01-01

The changes, modifications, and inclusions which were adapted to the current version of the MINIVER program are discussed. Extensive modifications were made to various subroutines, and a new plot package added. This plot package is the Johnson Space Center DISSPLA Graphics System currently driven under an 1110 EXEC 8 configuration. User instructions on executing the MINIVER program are provided and the plot package is described.

For operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

Computer programs for relational information management data base systems, spherical roller bearing analysis, a generalized pseudoinverse of a rectangular matrix, and software design and documentation language are summarized.

Best Practice Guidelines for Computer Technology in the Montessori Early Childhood Classroom.

ERIC Educational Resources Information Center

Montminy, Peter

1999-01-01

Presents a draft for a principle-centered position statement of a Montessori early childhood program in central Pennsylvania, on the pros and cons of computer use in a Montessori 3-6 classroom. Includes computer software rating form. (Author/KB)

Computer program to minimize prediction error in models from experiments with 16 hypercube points and 0 to 6 center points

NASA Technical Reports Server (NTRS)

Holms, A. G.

1982-01-01

A previous report described a backward deletion procedure of model selection that was optimized for minimum prediction error and which used a multiparameter combination of the F - distribution and an order statistics distribution of Cochran's. A computer program is described that applies the previously optimized procedure to real data. The use of the program is illustrated by examples.

The NASA Computational Fluid Dynamics (CFD) program - Building technology to solve future challenges

NASA Technical Reports Server (NTRS)

Richardson, Pamela F.; Dwoyer, Douglas L.; Kutler, Paul; Povinelli, Louis A.

1993-01-01

This paper presents the NASA Computational Fluid Dynamics program in terms of a strategic vision and goals as well as NASA's financial commitment and personnel levels. The paper also identifies the CFD program customers and the support to those customers. In addition, the paper discusses technical emphasis and direction of the program and some recent achievements. NASA's Ames, Langley, and Lewis Research Centers are the research hubs of the CFD program while the NASA Headquarters Office of Aeronautics represents and advocates the program.

The role of dedicated data computing centers in the age of cloud computing

NASA Astrophysics Data System (ADS)

Caramarcu, Costin; Hollowell, Christopher; Strecker-Kellogg, William; Wong, Antonio; Zaytsev, Alexandr

2017-10-01

Brookhaven National Laboratory (BNL) anticipates significant growth in scientific programs with large computing and data storage needs in the near future and has recently reorganized support for scientific computing to meet these needs. A key component is the enhanced role of the RHIC-ATLAS Computing Facility (RACF) in support of high-throughput and high-performance computing (HTC and HPC) at BNL. This presentation discusses the evolving role of the RACF at BNL, in light of its growing portfolio of responsibilities and its increasing integration with cloud (academic and for-profit) computing activities. We also discuss BNL’s plan to build a new computing center to support the new responsibilities of the RACF and present a summary of the cost benefit analysis done, including the types of computing activities that benefit most from a local data center vs. cloud computing. This analysis is partly based on an updated cost comparison of Amazon EC2 computing services and the RACF, which was originally conducted in 2012.

Computational Toxicology as Implemented by the US EPA ...

EPA Pesticide Factsheets

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environmental Protection Agency EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in air, water, and hazardous-waste sites. The Office of Research and Development (ORD) Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the U.S. EPA Science to Achieve Results (STAR) program. Together these elements form the key components in the implementation of both the initial strategy, A Framework for a Computational Toxicology Research Program (U.S. EPA, 2003), and the newly released The U.S. Environmental Protection Agency's Strategic Plan for Evaluating the T

User's guide to the UTIL-ODRC tape processing program. [for the Orbital Data Reduction Center

NASA Technical Reports Server (NTRS)

Juba, S. M. (Principal Investigator)

1981-01-01

The UTIL-ODRC computer compatible tape processing program, its input/output requirements, and its interface with the EXEC 8 operating system are described. It is a multipurpose orbital data reduction center (ODRC) tape processing program enabling the user to create either exact duplicate tapes and/or tapes in SINDA/HISTRY format. Input data elements for PRAMPT/FLOPLT and/or BATCH PLOT programs, a temperature summary, and a printed summary can also be produced.

Computer Programs (Turbomachinery)

NASA Technical Reports Server (NTRS)

1978-01-01

NASA computer programs are extensively used in design of industrial equipment. Available from the Computer Software Management and Information Center (COSMIC) at the University of Georgia, these programs are employed as analysis tools in design, test and development processes, providing savings in time and money. For example, two NASA computer programs are used daily in the design of turbomachinery by Delaval Turbine Division, Trenton, New Jersey. The company uses the NASA splint interpolation routine for analysis of turbine blade vibration and the performance of compressors and condensers. A second program, the NASA print plot routine, analyzes turbine rotor response and produces graphs for project reports. The photos show examples of Delaval test operations in which the computer programs play a part. In the large photo below, a 24-inch turbine blade is undergoing test; in the smaller photo, a steam turbine rotor is being prepared for stress measurements under actual operating conditions; the "spaghetti" is wiring for test instrumentation

Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

NASA Technical Reports Server (NTRS)

Estes, Ronald H. (Editor)

1993-01-01

This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

For operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

Computer programs for degaussing, magnetic field calculation, low speed wing flap systems aerodynamics, structural panel analysis, dynamic stress/strain data acquisition, allocation and network scheduling, and digital filters are discussed.

Computer Center: BASIC String Models of Genetic Information Transfer.

ERIC Educational Resources Information Center

Spain, James D., Ed.

1984-01-01

Discusses some of the major genetic information processes which may be modeled by computer program string manipulation, focusing on replication and transcription. Also discusses instructional applications of using string models. (JN)

Attitudes toward Advanced and Multivariate Statistics When Using Computers.

ERIC Educational Resources Information Center

Kennedy, Robert L.; McCallister, Corliss Jean

This study investigated the attitudes toward statistics of graduate students who studied advanced statistics in a course in which the focus of instruction was the use of a computer program in class. The use of the program made it possible to provide an individualized, self-paced, student-centered, and activity-based course. The three sections…

A Survey of Computer Usage in Adult Education Programs in Florida Report.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

A study was conducted to identify the types and uses of computer hardware and software in adult and community education programs in Florida. Information was gathered through a survey instrument developed for the study and mailed to 100 adult and community education directors and adult literacy center coordinators (92 surveys were returned). The…

A distributed computing model for telemetry data processing

NASA Astrophysics Data System (ADS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-05-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

A distributed computing model for telemetry data processing

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-01-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

Nontrivial, Nonintelligent, Computer-Based Learning.

ERIC Educational Resources Information Center

Bork, Alfred

1987-01-01

This paper describes three interactive computer programs used with personal computers to present science learning modules for all ages. Developed by groups of teachers at the Educational Technology Center at the University of California, Irvine, these instructional materials do not use the techniques of contemporary artificial intelligence. (GDC)

Operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

1983-01-01

The major operational areas of the COSMIC center are described. Quantitative data on the software submittals, program verification, and evaluation are presented. The dissemination activities are summarized. Customer services and marketing activities of the center for the calendar year are described. Those activities devoted to the maintenance and support of selected programs are described. A Customer Information system, the COSMIC Abstract Recording System Project, and the COSMIC Microfiche Project are summarized. Operational cost data are summarized.

The Center of Excellence for Hypersonics Training and Research at the University of Texas at Austin

NASA Technical Reports Server (NTRS)

Dolling, David S.

1993-01-01

Over the period of this grant (1986-92), 23 graduate students were supported by the Center and received education and training in hypersonics through MS and Ph.D. programs. An additional 8 Ph.D. candidates and 2 MS candidates, with their own fellowship support, were attracted to The University of Texas and were recruited into the hypersonics program because of the Center. Their research, supervised by the 10 faculty involved in the Center, resulted in approximately 50 publications and presentations in journals and at national and international technical conferences. To provide broad-based training, a new hypersonics curriculum was created, enabling students to take 8 core classes in theoretical, computational, and experimental hypersonics, and other option classes over a two to four semester period. The Center also developed an active continuing education program. The Hypersonics Short Course was taught 3 times, twice in the USA and once in Europe. Approximately 300 persons were attracted to hear lectures by more than 25 of the leading experts in the field. In addition, a hypersonic aerodynamics short course was offered through AIAA, as well as short courses on computational fluid dynamics (CFD) and advanced CFD. The existence of the Center also enabled faculty to leverage a substantial volume of additional funds from other agencies, for research and graduate student training. Overall, this was a highly successful and highly visible program.

Marshal Wrubel and the Electronic Computer as an Astronomical Instrument

NASA Astrophysics Data System (ADS)

Mutschlecner, J. P.; Olsen, K. H.

1998-05-01

In 1960, Marshal H. Wrubel, professor of astrophysics at Indiana University, published an influential review paper under the title, "The Electronic Computer as an Astronomical Instrument." This essay pointed out the enormous potential of the electronic computer as an instrument of observational and theoretical research in astronomy, illustrated programming concepts, and made specific recommendations for the increased use of computers in astronomy. He noted that, with a few scattered exceptions, computer use by the astronomical community had heretofore been "timid and sporadic." This situation was to improve dramatically in the next few years. By the late 1950s, general-purpose, high-speed, "mainframe" computers were just emerging from the experimental, developmental stage, but few were affordable by or available to academic and research institutions not closely associated with large industrial or national defense programs. Yet by 1960 Wrubel had spent a decade actively pioneering and promoting the imaginative application of electronic computation within the astronomical community. Astronomy upper-level undergraduate and graduate students at Indiana were introduced to computing, and Ph.D. candidates who he supervised applied computer techniques to problems in theoretical astrophysics. He wrote an early textbook on programming, taught programming classes, and helped establish and direct the Research Computing Center at Indiana, later named the Wrubel Computing Center in his honor. He and his students created a variety of algorithms and subroutines and exchanged these throughout the astronomical community by distributing the Astronomical Computation News Letter. Nationally as well as internationally, Wrubel actively cooperated with other groups interested in computing applications for theoretical astrophysics, often through his position as secretary of the IAU commission on Stellar Constitution.

When technology became language: the origins of the linguistic conception of computer programming, 1950-1960.

PubMed

Nofre, David; Priestley, Mark; Alberts, Gerard

2014-01-01

Language is one of the central metaphors around which the discipline of computer science has been built. The language metaphor entered modern computing as part of a cybernetic discourse, but during the second half of the 1950s acquired a more abstract meaning, closely related to the formal languages of logic and linguistics. The article argues that this transformation was related to the appearance of the commercial computer in the mid-1950s. Managers of computing installations and specialists on computer programming in academic computer centers, confronted with an increasing variety of machines, called for the creation of "common" or "universal languages" to enable the migration of computer code from machine to machine. Finally, the article shows how the idea of a universal language was a decisive step in the emergence of programming languages, in the recognition of computer programming as a proper field of knowledge, and eventually in the way we think of the computer.

Examining the Feasibility and Effect of Transitioning GED Tests to Computer

ERIC Educational Resources Information Center

Higgins, Jennifer; Patterson, Margaret Becker; Bozman, Martha; Katz, Michael

2010-01-01

This study examined the feasibility of administering GED Tests using a computer based testing system with embedded accessibility tools and the impact on test scores and test-taker experience when GED Tests are transitioned from paper to computer. Nineteen test centers across five states successfully installed the computer based testing program,…

A Sensitivity Analysis of the Rigid Pavement Life-Cycle Cost Analysis Program

DOT National Transportation Integrated Search

2000-12-01

Original Report Date: September 1999. This report describes the sensitivity analysis performed on the Rigid Pavement Life-Cycle Cost Analysis program, a computer program developed by the Center for Transportation Research for the Texas Department of ...

PISCES 2 users manual

NASA Technical Reports Server (NTRS)

Pratt, Terrence W.

1987-01-01

PISCES 2 is a programming environment and set of extensions to Fortran 77 for parallel programming. It is intended to provide a basis for writing programs for scientific and engineering applications on parallel computers in a way that is relatively independent of the particular details of the underlying computer architecture. This user's manual provides a complete description of the PISCES 2 system as it is currently implemented on the 20 processor Flexible FLEX/32 at NASA Langley Research Center.

Proceedings: Computer Science and Data Systems Technical Symposium, volume 1

NASA Technical Reports Server (NTRS)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form are included for topics in three categories: computer science, data systems and space station applications.

Ames Research Center Publications: A Continuing Bibliography

NASA Technical Reports Server (NTRS)

1981-01-01

The Ames Research Center Publications: A Continuing Bibliography contains the research output of the Center indexed during 1981 in Scientific and Technical Aerospace Reports (STAR), Limited Scientific and Technical Aerospace Reports (LSTAR), International Aerospace Abstracts (IAA), and Computer Program Abstracts (CPA). This bibliography is published annually in an attempt to effect greater awareness and distribution of the Center's research output.

1999 NCCS Highlights

NASA Technical Reports Server (NTRS)

Bennett, Jerome (Technical Monitor)

2002-01-01

The NASA Center for Computational Sciences (NCCS) is a high-performance scientific computing facility operated, maintained and managed by the Earth and Space Data Computing Division (ESDCD) of NASA Goddard Space Flight Center's (GSFC) Earth Sciences Directorate. The mission of the NCCS is to advance leading-edge science by providing the best people, computers, and data storage systems to NASA's Earth and space sciences programs and those of other U.S. Government agencies, universities, and private institutions. Among the many computationally demanding Earth science research efforts supported by the NCCS in Fiscal Year 1999 (FY99) are the NASA Seasonal-to-Interannual Prediction Project, the NASA Search and Rescue Mission, Earth gravitational model development efforts, the National Weather Service's North American Observing System program, Data Assimilation Office studies, a NASA-sponsored project at the Center for Ocean-Land-Atmosphere Studies, a NASA-sponsored microgravity project conducted by researchers at the City University of New York and the University of Pennsylvania, the completion of a satellite-derived global climate data set, simulations of a new geodynamo model, and studies of Earth's torque. This document presents highlights of these research efforts and an overview of the NCCS, its facilities, and its people.

Digital computer program DF1758 fully coupled natural frequencies and mode shapes of a helicopter rotor blade

NASA Technical Reports Server (NTRS)

Bennett, R. L.

1975-01-01

The analytical techniques and computer program developed in the fully-coupled rotor vibration study are described. The rotor blade natural frequency and mode shape analysis was implemented in a digital computer program designated DF1758. The program computes collective, cyclic, and scissor modes for a single blade within a specified range of frequency for specified values of rotor RPM and collective angle. The analysis includes effects of blade twist, cg offset from reference axis, and shear center offset from reference axis. Coupled inplane, out-of-plane, and torsional vibrations are considered. Normalized displacements, shear forces and moments may be printed out and Calcomp plots of natural frequencies as a function of rotor RPM may be produced.

Vertical Root Fracture Detection Using Limited-FOV Cone-Beam Computed Tomography

DTIC Science & Technology

2012-06-01

A thesis submitted to the Faculty of the Endodontics Graduate Program Naval Postgraduate Dental School Uniformed Services...Dental Program Navy Medicine Professional Development Center Terry D. Webb, DDS, MS CAPT, DC, USN Chairman, Endodontics Dept. Glen M. Imamura, S...Computed Tomography Geoffrey McMurray, DDS, MS ABSTRACT Introduction: Vertical root fractures (VRF) often occur in endodontically treated teeth

USSR Report, Kommunist, No. 13, September 1986.

DTIC Science & Technology

1987-01-07

all-union) program for specialization of NPO and industrial enterprises and their scientific research institutes and design bureaus could play a major...machine tools with numerical programming (ChPU), processing centers, automatic machines and groups of automatic machines controlled by computers, and...automatic lines, computer- controlled groups of equipment, comprehensively automated shops and sections) is the most important feature of high technical

Some Measurement and Instruction Related Considerations Regarding Computer Assisted Testing.

ERIC Educational Resources Information Center

Oosterhof, Albert C.; Salisbury, David F.

The Assessment Resource Center (ARC) at Florida State University provides computer assisted testing (CAT) for approximately 4,000 students each term. Computer capabilities permit a small proctoring staff to administer tests simultaneously to large numbers of students. Programs provide immediate feedback for students and generate a variety of…

75 FR 54162 - Privacy Act of 1974

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-03

... Program A. General The Computer Matching and Privacy Protection Act of 1988 (Pub. L. 100-503), amended the... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare and Medicaid Services [CMS Computer Match No. 2010-01; HHS Computer Match No. 1006] Privacy Act of 1974 AGENCY: Department of Health and...

Center for Center for Technology for Advanced Scientific Component Software (TASCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostadin, Damevski

A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technologymore » for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.« less

ICAM (Integrated Computer Aided Manufacturing) Conceptual Design for Computer-Integrated Manufacturing. Volume 1. Project Overview and Technical Summary

DTIC Science & Technology

1984-06-29

sheet metal, machined and composite parts and assembling the components into final pruJucts o Planning, evaluating, testing, inspecting and...Research showed that current programs were pursuing the design and demonstration of integrated centers for sheet metal, machining and composite ...determine any metal parts required and to schedule these requirements from the machining center. Figure 3-33, Planned Composite Production, shows

[Automated processing of data from the 1985 population and housing census].

PubMed

Cholakov, S

1987-01-01

The author describes the method of automated data processing used in the 1985 census of Bulgaria. He notes that the computerization of the census involves decentralization and the use of regional computing centers as well as data processing at the Central Statistical Office's National Information Computer Center. Special attention is given to problems concerning the projection and programming of census data. (SUMMARY IN ENG AND RUS)

A Computer-Based System Integrating Instruction and Information Retrieval: A Description of Some Methodological Considerations.

ERIC Educational Resources Information Center

Selig, Judith A.; And Others

This report, summarizing the activities of the Vision Information Center (VIC) in the field of computer-assisted instruction from December, 1966 to August, 1967, describes the methodology used to load a large body of information--a programed text on basic opthalmology--onto a computer for subsequent information retrieval and computer-assisted…

76 FR 14669 - Privacy Act of 1974; CMS Computer Match No. 2011-02; HHS Computer Match No. 1007

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... (CMS); and Department of Defense (DoD), Manpower Data Center (DMDC), Defense Enrollment and Eligibility... the results of the computer match and provide the information to TMA for use in its matching program... under TRICARE. DEERS will receive the results of the computer match and provide the information provided...

Computer science: Key to a space program renaissance. The 1981 NASA/ASEE summer study on the use of computer science and technology in NASA. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Freitas, R. A., Jr. (Editor); Carlson, P. A. (Editor)

1983-01-01

Adoption of an aggressive computer science research and technology program within NASA will: (1) enable new mission capabilities such as autonomous spacecraft, reliability and self-repair, and low-bandwidth intelligent Earth sensing; (2) lower manpower requirements, especially in the areas of Space Shuttle operations, by making fuller use of control center automation, technical support, and internal utilization of state-of-the-art computer techniques; (3) reduce project costs via improved software verification, software engineering, enhanced scientist/engineer productivity, and increased managerial effectiveness; and (4) significantly improve internal operations within NASA with electronic mail, managerial computer aids, an automated bureaucracy and uniform program operating plans.

Ames Research Center SR&T program and earth observations

NASA Technical Reports Server (NTRS)

Poppoff, I. G.

1972-01-01

An overview is presented of the research activities in earth observations at Ames Research Center. Most of the tasks involve the use of research aircraft platforms. The program is also directed toward the use of the Illiac 4 computer for statistical analysis. Most tasks are weighted toward Pacific coast and Pacific basin problems with emphasis on water applications, air applications, animal migration studies, and geophysics.

NASA propagation information center

NASA Technical Reports Server (NTRS)

Smith, Ernest K.; Flock, Warren L.

1990-01-01

The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

NASA Propagation Information Center

NASA Technical Reports Server (NTRS)

Smith, Ernest K.; Flock, Warren L.

1989-01-01

The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The Center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

Solving the "Hidden Line" Problem

NASA Technical Reports Server (NTRS)

1984-01-01

David Hedgley Jr., a mathematician at Dryden Flight Research Center, has developed an accurate computer program that considers whether a line in a graphic model of a three dimensional object should or should not be visible. The Hidden Line Computer Code, program automatically removes superfluous lines and permits the computer to display an object from specific viewpoints, just as the human eye would see it. Users include Rowland Institute for Science in Cambridge, MA, several departments of Lockheed Georgia Co., and Nebraska Public Power District (NPPD).

Proceedings: Computer Science and Data Systems Technical Symposium, volume 2

NASA Technical Reports Server (NTRS)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form, along with abstracts, are included for topics in three catagories: computer science, data systems, and space station applications.

EPAS TOXCAST PROGRAM FOR PREDICTING HAZARD AND PRIORITIZING TOXICITY TESTING OF ENVIRONMENTAL CHEMICALS(S).

EPA Science Inventory

EPAs National Center for Computational Toxicology is developing methods that apply computational chemistry, high-throughput screening (HTS) and genomic technologies to predict potential toxicity and prioritize the use of limited testing resources.

The U.S. "Tox21 Community" and the Future of Toxicology

EPA Science Inventory

In early 2008, the National Institute of Environmental Health Sciences/National Toxicology Program, the NIH Chemical Genomics Center, and the Environmental Protection Agency’s National Center for Computational Toxicology entered into a Memorandum of Understanding to collaborate o...

The Center for Nanophase Materials Sciences

NASA Astrophysics Data System (ADS)

Lowndes, Douglas

2005-03-01

The Center for Nanophase Materials Sciences (CNMS) located at Oak Ridge National Laboratory (ORNL) will be the first DOE Nanoscale Science Research Center to begin operation, with construction to be completed in April 2005 and initial operations in October 2005. The CNMS' scientific program has been developed through workshops with the national community, with the goal of creating a highly collaborative research environment to accelerate discovery and drive technological advances. Research at the CNMS is organized under seven Scientific Themes selected to address challenges to understanding and to exploit particular ORNL strengths (see http://cnms.ornl.govhttp://cnms.ornl.gov). These include extensive synthesis and characterization capabilities for soft, hard, nanostructured, magnetic and catalytic materials and their composites; neutron scattering at the Spallation Neutron Source and High Flux Isotope Reactor; computational nanoscience in the CNMS' Nanomaterials Theory Institute and utilizing facilities and expertise of the Center for Computational Sciences and the new Leadership Scientific Computing Facility at ORNL; a new CNMS Nanofabrication Research Laboratory; and a suite of unique and state-of-the-art instruments to be made reliably available to the national community for imaging, manipulation, and properties measurements on nanoscale materials in controlled environments. The new research facilities will be described together with the planned operation of the user research program, the latter illustrated by the current ``jump start'' user program that utilizes existing ORNL/CNMS facilities.

Programming by Choice: Urban Youth Learning Programming with Scratch

ERIC Educational Resources Information Center

Maloney, John; Peppler, Kylie; Kafai, Yasmin B.; Resnick, Mitchel; Rusk, Natalie

2008-01-01

This paper describes Scratch, a visual, block-based programming language designed to facilitate media manipulation for novice programmers. We report on the Scratch programming experiences of urban youth ages 8-18 at a Computer Clubhouse--an after school center--over an 18-month period. Our analyses of 536 Scratch projects collected during this…

Program management model study

NASA Technical Reports Server (NTRS)

Connelly, J. J.; Russell, J. E.; Seline, J. R.; Sumner, N. R., Jr.

1972-01-01

Two models, a system performance model and a program assessment model, have been developed to assist NASA management in the evaluation of development alternatives for the Earth Observations Program. Two computer models were developed and demonstrated on the Goddard Space Flight Center Computer Facility. Procedures have been outlined to guide the user of the models through specific evaluation processes, and the preparation of inputs describing earth observation needs and earth observation technology. These models are intended to assist NASA in increasing the effectiveness of the overall Earth Observation Program by providing a broader view of system and program development alternatives.

The IDEAS**2 computing environment

NASA Technical Reports Server (NTRS)

Racheli, Ugo

1990-01-01

This document presents block diagrams of the IDEAS**2 computing environment. IDEAS**2 is the computing environment selected for system engineering (design and analysis) by the Center for Space Construction (CSC) at the University of Colorado (UCB). It is intended to support integration and analysis of any engineering system and at any level of development, from Pre-Phase A conceptual studies to fully mature Phase C/D projects. The University of Colorado (through the Center for Space Construction) has joined the Structural Dynamics Research Corporation (SDRC) University Consortium which makes available unlimited software licenses for instructional purposes. In addition to providing the backbone for the implementation of the IDEAS**2 computing environment, I-DEAS can be used as a stand-alone product for undergraduate CAD/CAE instruction. Presently, SDRC is in the process of releasing I-DEAS level 5.0 which represents a substantial improvement in both the user interface and graphic processing capabilities. IDEAS**2 will be immediately useful for a number of current programs within CSC (such as DYCAM and the 'interruptability problem'). In the future, the following expansions of the basic IDEAS**2 program will be pursued, consistent with the overall objectives of the Center and of the College: upgrade I-DEAS and IDEAS**2 to level 5.0; create new analytical programs for applications not limited to orbital platforms; research the semantic organization of engineering databases; and create an 'interoperability' testbed.

Controlling Infrastructure Costs: Right-Sizing the Mission Control Facility

NASA Technical Reports Server (NTRS)

Martin, Keith; Sen-Roy, Michael; Heiman, Jennifer

2009-01-01

Johnson Space Center's Mission Control Center is a space vehicle, space program agnostic facility. The current operational design is essentially identical to the original facility architecture that was developed and deployed in the mid-90's. In an effort to streamline the support costs of the mission critical facility, the Mission Operations Division (MOD) of Johnson Space Center (JSC) has sponsored an exploratory project to evaluate and inject current state-of-the-practice Information Technology (IT) tools, processes and technology into legacy operations. The general push in the IT industry has been trending towards a data-centric computer infrastructure for the past several years. Organizations facing challenges with facility operations costs are turning to creative solutions combining hardware consolidation, virtualization and remote access to meet and exceed performance, security, and availability requirements. The Operations Technology Facility (OTF) organization at the Johnson Space Center has been chartered to build and evaluate a parallel Mission Control infrastructure, replacing the existing, thick-client distributed computing model and network architecture with a data center model utilizing virtualization to provide the MCC Infrastructure as a Service. The OTF will design a replacement architecture for the Mission Control Facility, leveraging hardware consolidation through the use of blade servers, increasing utilization rates for compute platforms through virtualization while expanding connectivity options through the deployment of secure remote access. The architecture demonstrates the maturity of the technologies generally available in industry today and the ability to successfully abstract the tightly coupled relationship between thick-client software and legacy hardware into a hardware agnostic "Infrastructure as a Service" capability that can scale to meet future requirements of new space programs and spacecraft. This paper discusses the benefits and difficulties that a migration to cloud-based computing philosophies has uncovered when compared to the legacy Mission Control Center architecture. The team consists of system and software engineers with extensive experience with the MCC infrastructure and software currently used to support the International Space Station (ISS) and Space Shuttle program (SSP).

75 FR 56057 - Proposed Information Collection; Comment Request; Broadband Technology Opportunities Program Post...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... Information Collection; Comment Request; Broadband Technology Opportunities Program Post-Award Quarterly and... (Recovery Act) establishes and provides $4.7 billion for the Broadband Technology Opportunities Program... million will be made available for competitive grants to expand public computer center capacity; at least...

Computer Programs.

ERIC Educational Resources Information Center

Anderson, Tiffoni

This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

Computer program for flat sector thrust bearing performance

NASA Technical Reports Server (NTRS)

Presler, A. F.; Etsion, I.

1977-01-01

A versatile computer program is presented which achieves a rapid, numerical solution of the Reynolds equation for a flat sector thrust pad bearing with either compressible or liquid lubricants. Program input includes a range in values of the geometric and operating parameters of the sector bearing. Performance characteristics are obtained from the calculated bearing pressure distribution. These are the load capacity, center of pressure coordinates, frictional energy dissipation, and flow rates of liquid lubricant across the bearing edges. Two sample problems are described.

Basic EMC Technology Advancement for C(3) Systems - SHIELD. Volume IV B. A Digital Computer Program for Computing Crosstalk between Shielded Cables

DTIC Science & Technology

1982-11-01

your organization , please notify RADC OBCT) Griffiss AFB NY 13441. This will assist us in maintaining a current mailing list. Do not return copies of...RMING ORGANIZATION NAME r AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Southeastern Center for Electrical AREA6WORKUNITNUMBERS Engineering Education...The program requires that the input data groups be organized as shown in Table 1 where the number of unshielded wires is U and the number of shielded

A Functional Specification for a Programming Language for Computer Aided Learning Applications.

ERIC Educational Resources Information Center

National Research Council of Canada, Ottawa (Ontario).

In 1972 there were at least six different course authoring languages in use in Canada with little exchange of course materials between Computer Assisted Learning (CAL) centers. In order to improve facilities for producing "transportable" computer based course materials, a working panel undertook the definition of functional requirements of a user…

An information retrieval system for research file data

Treesearch

Joan E. Lengel; John W. Koning

1978-01-01

Research file data have been successfully retrieved at the Forest Products Laboratory through a high-speed cross-referencing system involving the computer program FAMULUS as modified by the Madison Academic Computing Center at the University of Wisconsin. The method of data input, transfer to computer storage, system utilization, and effectiveness are discussed....

For operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

Computer programs for large systems of normal equations, an interactive digital signal process, structural analysis of cylindrical thrust chambers, swirling turbulent axisymmetric recirculating flows in practical isothermal combustor geometrics, computation of three dimensional combustor performance, a thermal radiation analysis system, transient response analysis, and a software design analysis are summarized.

The Future of School Library Media Centers.

ERIC Educational Resources Information Center

Craver, Kathleen W.

1984-01-01

Examines impact of technology on school library media program development and role of school librarian. Technological trends (computerized record keeping, computer-assisted instruction, networking, home computers, videodiscs), employment and economic trends, education of school librarians, social and behavioral trends, and organizational and…

Computational Fluid Dynamics Program at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Holst, Terry L.

1989-01-01

The Computational Fluid Dynamics (CFD) Program at NASA Ames Research Center is reviewed and discussed. The technical elements of the CFD Program are listed and briefly discussed. These elements include algorithm research, research and pilot code development, scientific visualization, advanced surface representation, volume grid generation, and numerical optimization. Next, the discipline of CFD is briefly discussed and related to other areas of research at NASA Ames including experimental fluid dynamics, computer science research, computational chemistry, and numerical aerodynamic simulation. These areas combine with CFD to form a larger area of research, which might collectively be called computational technology. The ultimate goal of computational technology research at NASA Ames is to increase the physical understanding of the world in which we live, solve problems of national importance, and increase the technical capabilities of the aerospace community. Next, the major programs at NASA Ames that either use CFD technology or perform research in CFD are listed and discussed. Briefly, this list includes turbulent/transition physics and modeling, high-speed real gas flows, interdisciplinary research, turbomachinery demonstration computations, complete aircraft aerodynamics, rotorcraft applications, powered lift flows, high alpha flows, multiple body aerodynamics, and incompressible flow applications. Some of the individual problems actively being worked in each of these areas is listed to help define the breadth or extent of CFD involvement in each of these major programs. State-of-the-art examples of various CFD applications are presented to highlight most of these areas. The main emphasis of this portion of the presentation is on examples which will not otherwise be treated at this conference by the individual presentations. Finally, a list of principal current limitations and expected future directions is given.

The Lister Hill National Center for Biomedical Communications.

PubMed

Smith, K A

1994-09-01

On August 3, 1968, the Joint Resolution of the Congress established the program and construction of the Lister Hill National Center for Biomedical Communications. The facility dedicated in 1980 contains the latest in computer and communications technologies. The history, program requirements, construction management, and general planning are discussed including technical issues regarding cabling, systems functions, heating, ventilation, and air conditioning system (HVAC), fire suppression, research and development laboratories, among others.

Applied Information Systems Research Program Workshop

NASA Technical Reports Server (NTRS)

Bredekamp, Joe

1991-01-01

Viewgraphs on Applied Information Systems Research Program Workshop are presented. Topics covered include: the Earth Observing System Data and Information System; the planetary data system; Astrophysics Data System project review; OAET Computer Science and Data Systems Programs; the Center of Excellence in Space Data and Information Sciences; and CASIS background.

Environmental Analysis

NASA Technical Reports Server (NTRS)

1980-01-01

Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

Chemistry Research

NASA Technical Reports Server (NTRS)

1987-01-01

Philip Morris research center scientists use a computer program called CECTRP, for Chemical Equilibrium Composition and Transport Properties, to gain insight into the behavior of atoms as they progress along the reaction pathway. Use of the program lets the scientist accurately predict the behavior of a given molecule or group of molecules. Computer generated data must be checked by laboratory experiment, but the use of CECTRP saves the researchers hundreds of hours of laboratory time since experiments must run only to validate the computer's prediction. Philip Morris estimates that had CECTRP not been available, at least two man years would have been required to develop a program to perform similar free energy calculations.

AVTC Hosts TechnoCamp

ERIC Educational Resources Information Center

Miner, Brenda

2006-01-01

The Area Vo-Tech Center (AVTC) in Russellville, Arkansas, recently hosted its first TechnoCamp to encourage enrollment based on the aptitude and interest level of the students enrolling in the various programs. The center currently offers student enrollment in auto technology, computer engineering, cosmetology, construction technology, drafting…

Development of computational methods for unsteady aerodynamics at the NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Yates, E. Carson, Jr.; Whitlow, Woodrow, Jr.

1987-01-01

The current scope, recent progress, and plans for research and development of computational methods for unsteady aerodynamics at the NASA Langley Research Center are reviewed. Both integral equations and finite difference methods for inviscid and viscous flows are discussed. Although the great bulk of the effort has focused on finite difference solution of the transonic small perturbation equation, the integral equation program is given primary emphasis here because it is less well known.

Development of computational methods for unsteady aerodynamics at the NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Yates, E. Carson, Jr.; Whitlow, Woodrow, Jr.

1987-01-01

The current scope, recent progress, and plans for research and development of computational methods for unsteady aerodynamics at the NASA Langley Research Center are reviewed. Both integral-equations and finite-difference method for inviscid and viscous flows are discussed. Although the great bulk of the effort has focused on finite-difference solution of the transonic small-perturbation equation, the integral-equation program is given primary emphasis here because it is less well known.

Environmental Definition Program Cross Sectional Analysis; Summary of Data and Analysis Techniques

DTIC Science & Technology

1975-12-31

selected locations, and to characterize cloud and precipitation systems during certain tests and experiments conducted at Wallops Flight Center and at...values. The LWCA was on- site at Wallops Flight Center assisting the special Elight measurements. Other computer programs developed were designed to...550581 N 37025, E Kiev 50024 N 30027 E Simferopol 45001, N 33059! E Perm 58001, N 56018, E Aktyubinsk 50020, N 570131 E Semipalatinsk 50021! N 80015

Applications of automatic differentiation in computational fluid dynamics

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Carle, A.; Bischof, C.; Haigler, Kara J.; Newman, Perry A.

1994-01-01

Automatic differentiation (AD) is a powerful computational method that provides for computing exact sensitivity derivatives (SD) from existing computer programs for multidisciplinary design optimization (MDO) or in sensitivity analysis. A pre-compiler AD tool for FORTRAN programs called ADIFOR has been developed. The ADIFOR tool has been easily and quickly applied by NASA Langley researchers to assess the feasibility and computational impact of AD in MDO with several different FORTRAN programs. These include a state-of-the-art three dimensional multigrid Navier-Stokes flow solver for wings or aircraft configurations in transonic turbulent flow. With ADIFOR the user specifies sets of independent and dependent variables with an existing computer code. ADIFOR then traces the dependency path throughout the code, applies the chain rule to formulate derivative expressions, and generates new code to compute the required SD matrix. The resulting codes have been verified to compute exact non-geometric and geometric SD for a variety of cases. in less time than is required to compute the SD matrix using centered divided differences.

Concurrent extensions to the FORTRAN language for parallel programming of computational fluid dynamics algorithms

NASA Technical Reports Server (NTRS)

Weeks, Cindy Lou

1986-01-01

Experiments were conducted at NASA Ames Research Center to define multi-tasking software requirements for multiple-instruction, multiple-data stream (MIMD) computer architectures. The focus was on specifying solutions for algorithms in the field of computational fluid dynamics (CFD). The program objectives were to allow researchers to produce usable parallel application software as soon as possible after acquiring MIMD computer equipment, to provide researchers with an easy-to-learn and easy-to-use parallel software language which could be implemented on several different MIMD machines, and to enable researchers to list preferred design specifications for future MIMD computer architectures. Analysis of CFD algorithms indicated that extensions of an existing programming language, adaptable to new computer architectures, provided the best solution to meeting program objectives. The CoFORTRAN Language was written in response to these objectives and to provide researchers a means to experiment with parallel software solutions to CFD algorithms on machines with parallel architectures.

Summer High School Apprenticeship Research Program (SHARP)

NASA Technical Reports Server (NTRS)

1997-01-01

The summer of 1997 will not only be noted by NASA for the mission to Mars by the Pathfinder but also for the 179 brilliant apprentices that participated in the SHARP Program. Apprentice participation increased 17% over last year's total of 153 participants. As indicated by the End-of-the-Program Evaluations, 96% of the programs' participants rated the summer experience from very good to excellent. The SHARP Management Team began the year by meeting in Cocoa Beach, Florida for the annual SHARP Planning Conference. Participants strengthened their Education Division Computer Aided Tracking System (EDCATS) skills, toured the world-renowned Kennedy Space Center, and took a journey into space during the Alien Encounter Exercise. The participants returned to their Centers with the same goals and objectives in mind. The 1997 SHARP Program goals were: (1) Utilize NASA's mission, unique facilities and specialized workforce to provide exposure, education, and enrichment experiences to expand participants' career horizons and inspire excellence in formal education and lifelong learning. (2) Develop and implement innovative education reform initiatives which support NASA's Education Strategic Plan and national education goals. (3) Utilize established statistical indicators to measure the effectiveness of SHARP's program goals. (4) Explore new recruiting methods which target the student population for which SHARP was specifically designed. (5) Increase the number of participants in the program. All of the SHARP Coordinators reported that the goals and objectives for the overall program as well as their individual program goals were achieved. Some of the goals and objectives for the Centers were: (1) To increase the students' awareness of science, mathematics, engineering, and computer technology; (2) To provide students with the opportunity to broaden their career objectives; and (3) To expose students to a variety of enrichment activities. Most of the Center goals and objectives were consistent with the overall program goals. Modem Technology Systems, Inc., was able to meet the SHARP Apprentices, Coordinators and Mentors during their site visits to Stennis Space Center, Ames Research Center and Dryden Flight Research Center. All three Centers had very efficient programs and adhered to SHARP's general guidelines and procedures. MTSI was able to meet the apprentices from the other Centers via satellite in July during the SHARP Video-Teleconference(ViTS). The ViTS offered the apprentices and the NASA and SHARP Coordinators the opportunity to introduce themselves. The apprentices from each Center presented topical "Cutting Edge Projects". Some of the accomplishments for the 1997 SHARP Program year included: MTSI hiring apprentices from four of the nine NASA Centers, the full utilization of the EDCATS by apprentices and NASA/SHARP Coordinators, the distribution of the SHARP Apprentice College and Scholarship Directory, a reunion with former apprentices from Langley Research Center and the development of a SHARP Recruitment Poster. MTSI developed another exciting newsletter containing graphics and articles submitted by the apprentices and the SHARP Management Team.

An Automated Approach to Departmental Grant Management.

ERIC Educational Resources Information Center

Kressly, Gaby; Kanov, Arnold L.

1986-01-01

Installation of a small computer and the use of specially designed programs has proven a cost-effective solution to the data processing needs of a university medical center's ophthalmology department, providing immediate access to grants accounting information and avoiding dependence on the institution's mainframe computer. (MSE)

A Computer Program Functional Design of the Simulation Subsystem of an Automated Central Flow Control System

DOT National Transportation Integrated Search

1976-08-01

This report contains a functional design for the simulation of a future automation concept in support of the ATC Systems Command Center. The simulation subsystem performs airport airborne arrival delay predictions and computes flow control tables for...

A computer graphics display and data compression technique

NASA Technical Reports Server (NTRS)

Teague, M. J.; Meyer, H. G.; Levenson, L. (Editor)

1974-01-01

The computer program discussed is intended for the graphical presentation of a general dependent variable X that is a function of two independent variables, U and V. The required input to the program is the variation of the dependent variable with one of the independent variables for various fixed values of the other. The computer program is named CRP, and the output is provided by the SD 4060 plotter. Program CRP is an extremely flexible program that offers the user a wide variety of options. The dependent variable may be presented in either a linear or a logarithmic manner. Automatic centering of the plot is provided in the ordinate direction, and the abscissa is scaled automatically for a logarithmic plot. A description of the carpet plot technique is given along with the coordinates system used in the program. Various aspects of the program logic are discussed and detailed documentation of the data card format is presented.

Scientific and technical information output of the Langley Research Center

NASA Technical Reports Server (NTRS)

1984-01-01

Scientific and technical information that the Langley Research Center produced during the calendar year 1983 is compiled. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.

Using in vitro Dose-Response Profiles to Enhance QSAR Modeling of in vivo Toxicity

EPA Science Inventory

To develop effective means for rapid toxicity evaluation of environmental chemicals, the Tox21 partnership among the National Toxicology Program (NTP), NIH Chemical Genomics Center, and National Center for Computational Toxicology (NCCT) at the US EPA are conducting a number of ...

A brief overview of computational structures technology related activities at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Hopkins, Dale A.

1992-01-01

The presentation gives a partial overview of research and development underway in the Structures Division of LeRC, which collectively is referred to as the Computational Structures Technology Program. The activities in the program are diverse and encompass four major categories: (1) composite materials and structures; (2) probabilistic analysis and reliability; (3) design optimization and expert systems; and (4) computational methods and simulation. The approach of the program is comprehensive and entails exploration of fundamental theories of structural mechanics to accurately represent the complex physics governing engine structural performance, formulation, and implementation of computational techniques and integrated simulation strategies to provide accurate and efficient solutions of the governing theoretical models by exploiting the emerging advances in computer technology, and validation and verification through numerical and experimental tests to establish confidence and define the qualities and limitations of the resulting theoretical models and computational solutions. The program comprises both in-house and sponsored research activities. The remainder of the presentation provides a sample of activities to illustrate the breadth and depth of the program and to demonstrate the accomplishments and benefits that have resulted.

Distributing Data to Hand-Held Devices in a Wireless Network

NASA Technical Reports Server (NTRS)

Hodges, Mark; Simmons, Layne

2008-01-01

ADROIT is a developmental computer program for real-time distribution of complex data streams for display on Web-enabled, portable terminals held by members of an operational team of a spacecraft-command-and-control center who may be located away from the center. Examples of such terminals include personal data assistants, laptop computers, and cellular telephones. ADROIT would make it unnecessary to equip each terminal with platform- specific software for access to the data streams or with software that implements the information-sharing protocol used to deliver telemetry data to clients in the center. ADROIT is a combination of middleware plus software specific to the center. (Middleware enables one application program to communicate with another by performing such functions as conversion, translation, consolidation, and/or integration.) ADROIT translates a data stream (voice, video, or alphanumerical data) from the center into Extensible Markup Language, effectuates a subscription process to determine who gets what data when, and presents the data to each user in real time. Thus, ADROIT is expected to enable distribution of operations and to reduce the cost of operations by reducing the number of persons required to be in the center.

Thermal radiation view factor: Methods, accuracy and computer-aided procedures

NASA Technical Reports Server (NTRS)

Kadaba, P. V.

1982-01-01

The computer aided thermal analysis programs which predicts the result of predetermined acceptable temperature range prior to stationing of these orbiting equipment in various attitudes with respect to the Sun and the Earth was examined. Complexity of the surface geometries suggests the use of numerical schemes for the determination of these viewfactors. Basic definitions and standard methods which form the basis for various digital computer methods and various numerical methods are presented. The physical model and the mathematical methods on which a number of available programs are built are summarized. The strength and the weaknesses of the methods employed, the accuracy of the calculations and the time required for computations are evaluated. The situations where accuracies are important for energy calculations are identified and methods to save computational times are proposed. Guide to best use of the available programs at several centers and the future choices for efficient use of digital computers are included in the recommendations.

Contract Training and Computer-Assisted Instruction at Santa Fe Community College.

ERIC Educational Resources Information Center

Ortego, Sheila; Richards, Beverly

In summer 1993, Santa Fe Community College, New Mexico, created the External Programs Division (EPD) under its credit instruction program to serve the needs of non-traditional students. The EPD encompasses contract training, the Flex Lab, distance education, the AutoDesk Training Center, an Alternative Fuels program, and the corrections training…

Program For Tracking The Sun From The Moon

NASA Technical Reports Server (NTRS)

Woods, Warren K.; Spires, Dustin S.

1995-01-01

SUNTRACKER program computes azimuth and elevation angles of Sun, as viewed from given position on Moon, during time defined by user. Program gets selenographic (moon-centered) position of Sun at given Julian date, then converts selenographic position of Sun into azimuth and elevation at given position on Moon. Written in FORTRAN 77.

The Development and Evaluation of a Computer-Based System for Managing the Design and Pilot-Testing of Interactive Videodisc Programs. Training and Development Research Center, Project Number Forty-Three.

ERIC Educational Resources Information Center

Sayre, Scott Alan

The purpose of this study was to develop and validate a computer-based system that would allow interactive video developers to integrate and manage the design components prior to production. These components of an interactive video (IVD) program include visual information in a variety of formats, audio information, and instructional techniques,…

Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.

1988-01-01

NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

User's manual for a TEACH computer program for the analysis of turbulent, swirling reacting flow in a research combustor

NASA Technical Reports Server (NTRS)

Chiappetta, L. M.

1983-01-01

Described is a computer program for the analysis of the subsonic, swirling, reacting turbulent flow in an axisymmetric, bluff-body research combustor. The program features an improved finite-difference procedure designed to reduce the effects of numerical diffusion and a new algorithm for predicting the pressure distribution within the combustor. A research version of the computer program described in the report was supplied to United Technologies Research Center by Professor A. D. Gosman and his students, R. Benodeker and R. I. Issa, of Imperial College, London. The Imperial College staff also supplied much of the program documentation. Presented are a description of the mathematical model for flow within an axisymmetric bluff-body combustor, the development of the finite-difference procedure used to represent the system of equations, an outline of the algorithm for determining the static pressure distribution within the combustor, a description of the computer program including its input format, and the results for representative test cases.

Updated Panel-Method Computer Program

NASA Technical Reports Server (NTRS)

Ashby, Dale L.

1995-01-01

Panel code PMARC_12 (Panel Method Ames Research Center, version 12) computes potential-flow fields around complex three-dimensional bodies such as complete aircraft models. Contains several advanced features, including internal mathematical modeling of flow, time-stepping wake model for simulating either steady or unsteady motions, capability for Trefftz computation of drag induced by plane, and capability for computation of off-body and on-body streamlines, and capability of computation of boundary-layer parameters by use of two-dimensional integral boundary-layer method along surface streamlines. Investigators interested in visual representations of phenomena, may want to consider obtaining program GVS (ARC-13361), General visualization System. GVS is Silicon Graphics IRIS program created to support scientific-visualization needs of PMARC_12. GVS available separately from COSMIC. PMARC_12 written in standard FORTRAN 77, with exception of NAMELIST extension used for input.

"Beards, Sandals, and Other Signs of Rugged Individualism": Masculine Culture within the Computing Professions.

PubMed

Ensmenger, Nathan

2015-01-01

Over the course of the 1960s and 1970s, male computer experts were able to successfully transform the "routine and mechanical" (and therefore feminized) activity of computer programming into a highly valued, well-paying, and professionally respectable discipline. They did so by constructing for themselves a distinctively masculine identity in which individual artistic genius, personal eccentricity, anti-authoritarian behavior, and a characteristic "dislike of activities involving human interaction" were mobilized as sources of personal and professional authority. This article explores the history of masculine culture and practices in computer programming, with a particular focus on the role of university computer centers as key sites of cultural formation and dissemination.

RIACS FY2002 Annual Report

NASA Technical Reports Server (NTRS)

Leiner, Barry M.; Gross, Anthony R. (Technical Monitor)

2002-01-01

The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administration's missions. Operated by the Universities Space Research Association (a non-profit university consortium), RIACS is located at the NASA Ames Research Center, Moffett Field, California. It currently operates under a multiple year grant/cooperative agreement that began on October 1, 1997 and is up for renewal in September 2003. Ames has been designated NASA's Center of Excellence in Information Technology. In this capacity, Ames is charged with the responsibility to build an Information Technology (IT) Research Program that is preeminent within NASA. RIACS serves as a bridge between NASA Ames and the academic community, and RIACS scientists and visitors work in close collaboration with NASA scientists. RIACS has the additional goal of broadening the base of researchers in these areas of importance to the nation's space and aeronautics enterprises. RIACS research focuses on the three cornerstones of IT research necessary to meet the future challenges of NASA missions: 1) Automated Reasoning for Autonomous Systems; 2) Human-Centered Computing; and 3) High Performance Computing and Networking. In addition, RIACS collaborates with NASA scientists to apply IT research to a variety of NASA application domains including aerospace technology, earth science, life sciences, and astrobiology. RIACS also engages in other activities, such as workshops, seminars, visiting scientist programs and student summer programs, designed to encourage and facilitate collaboration between the university and NASA IT research communities.

Dateline Child Care.

ERIC Educational Resources Information Center

Child Care Information Exchange, 1987

1987-01-01

Discusses developmental trends influencing child care programs. They include growing popularity of flexible benefit plans for employees; American children's quality of life; state and local child care initiatives; children's uses of computers; and lack of after-school programs for low income children. Growth of accredited centers is also…

Computational fluid dynamics at NASA Ames and the numerical aerodynamic simulation program

NASA Technical Reports Server (NTRS)

Peterson, V. L.

1985-01-01

Computers are playing an increasingly important role in the field of aerodynamics such as that they now serve as a major complement to wind tunnels in aerospace research and development. Factors pacing advances in computational aerodynamics are identified, including the amount of computational power required to take the next major step in the discipline. The four main areas of computational aerodynamics research at NASA Ames Research Center which are directed toward extending the state of the art are identified and discussed. Example results obtained from approximate forms of the governing equations are presented and discussed, both in the context of levels of computer power required and the degree to which they either further the frontiers of research or apply to programs of practical importance. Finally, the Numerical Aerodynamic Simulation Program--with its 1988 target of achieving a sustained computational rate of 1 billion floating-point operations per second--is discussed in terms of its goals, status, and its projected effect on the future of computational aerodynamics.

Image Understanding Research and Its Application to Cartography and Computer-Based Analysis of Aerial Imagery

DTIC Science & Technology

1983-05-01

Parallel Computation that Assign Canonical Object-Based Frames of Refer- ence," Proc. 7th it. .nt. Onf. on Artifcial Intellig nce (IJCAI-81), Vol. 2...Perception of Linear Struc- ture in Imaged Data ." TN 276, Artiflci!.a Intelligence Center, SRI International, Feb. 1983. [Fram75] J.P. Frain and E.S...1983 May 1983 D C By: Martin A. Fischler, Program Director S ELECTE Principal Investigator, (415)859-5106 MAY 2 21990 Artificial Intelligence Center

National Special Education Alliance.

ERIC Educational Resources Information Center

Pressman, Harvey

1987-01-01

The article describes the National Special Education Alliance, a network of parent-led organizations seeking to speed the delivery of computer technology to the disabled. Discussed are program origins, starting a local center, charter members of the alliance, benefits of Alliance membership, and the Alliance's relationship with Apple computer. (DB)

Casino physics in the classroom

NASA Astrophysics Data System (ADS)

Whitney, Charles A.

1986-12-01

This article describes a seminar on the elements of probability and random processes that is computer centered and focuses on Monte Carlo simulations of processes such as coin flips, random walks on a lattice, and the behavior of photons and atoms in a gas. Representative computer programs are also described.

U.S. EPA computational toxicology programs: Central role of chemical-annotation efforts and molecular databases

EPA Science Inventory

EPA’s National Center for Computational Toxicology is engaged in high-profile research efforts to improve the ability to more efficiently and effectively prioritize and screen thousands of environmental chemicals for potential toxicity. A central component of these efforts invol...

Documentation of the data analysis system for the gamma ray monitor aboard OSO-H

NASA Technical Reports Server (NTRS)

Croteau, S.; Buck, A.; Higbie, P.; Kantauskis, J.; Foss, S.; Chupp, D.; Forrest, D. J.; Suri, A.; Gleske, I.

1973-01-01

The programming system is presented which was developed to prepare the data from the gamma ray monitor on OSO-7 for scientific analysis. The detector, data, and objectives are described in detail. Programs presented include; FEEDER, PASS-1, CAL1, CAL2, PASS-3, Van Allen Belt Predict Program, Computation Center Plot Routine, and Response Function Programs.

Adult Career Counseling Center. Fifteenth Annual Report, September 1997-June 1998.

ERIC Educational Resources Information Center

Goodman, Jane

The Adult Career Counseling Center (ACCC) at Oakland University provides career exploration and planning opportunities to community adults at no cost; trains faculty, staff, and students in the use of computer-assisted career guidance programs; and supports research efforts for a better understanding of career development resources. Clients…

The Politics of Peer Review in a Nonacademic Setting.

ERIC Educational Resources Information Center

Bocchi, Joseph S.

Organizational stratification and writers' attitudes played an important part in the rejection of a proposed editorial review program at a university computing center. A peer review board, which consisted of four composition instructors, was established by the center director, in cooperation with a composition teacher consultant, to ensure the…

Future applications of artificial intelligence to Mission Control Centers

NASA Technical Reports Server (NTRS)

Friedland, Peter

1991-01-01

Future applications of artificial intelligence to Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: basic objectives of the NASA-wide AI program; inhouse research program; constraint-based scheduling; learning and performance improvement for scheduling; GEMPLAN multi-agent planner; planning, scheduling, and control; Bayesian learning; efficient learning algorithms; ICARUS (an integrated architecture for learning); design knowledge acquisition and retention; computer-integrated documentation; and some speculation on future applications.

Research and educational initiatives at the Syracuse University Center for Hypersonics

NASA Technical Reports Server (NTRS)

Spina, E.; Lagraff, J.; Davidson, B.; Bogucz, E.; Dang, T.

1995-01-01

The Department of Mechanical, Aerospace, and Manufacturing Engineering and the Northeast Parallel Architectures Center of Syracuse University have been funded by NASA to establish a program to educate young engineers in the hypersonic disciplines. This goal is being achieved through a comprehensive five-year program that includes elements of undergraduate instruction, advanced graduate coursework, undergraduate research, and leading-edge hypersonics research. The research foci of the Syracuse Center for Hypersonics are three-fold; high-temperature composite materials, measurements in turbulent hypersonic flows, and the application of high-performance computing to hypersonic fluid dynamics.

Letter Writing Made Easy.

ERIC Educational Resources Information Center

Porec, Carol J.

1989-01-01

Describes how "The Children's Writing and Publishing Center" (a desktop publishing program for elementary students) combines word processing with computer graphics and motivates students to write letters. (MM)

Learning Resources and Technology. A Guide to Program Development.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford.

This guide provides a framework to assist all Connecticut school districts in planning effective learning resources centers and educational technology programs capable of providing: a well developed library media component; shared instructional design responsibilities; reading for enrichment; integration of computers into instruction; distance…

Computer Center. Interactive Biology with Videodisc.

ERIC Educational Resources Information Center

Kramer, David W.

1991-01-01

Ways in which students are allowed to choose, based on their curiosity at the moment, which way they will move through a lesson are described. Available software for interactive biology programs and available authoring software for developing interactive programs by teachers and students are listed. (KR)

Evaluation of School Library Media Centers: Demonstrating Quality.

ERIC Educational Resources Information Center

Everhart, Nancy

2003-01-01

Discusses ways to evaluate school library media programs and how to demonstrate quality. Topics include how principals evaluate programs; sources of evaluative data; national, state, and local instruments; surveys and interviews; Colorado benchmarks; evaluating the use of electronic resources; and computer reporting options. (LRW)

Computer use in primary care and patient-physician communication.

PubMed

Sobral, Dilermando; Rosenbaum, Marcy; Figueiredo-Braga, Margarida

2015-07-08

This study evaluated how physicians and patients perceive the impact of computer use on clinical communication, and how a patient-centered orientation can influence this impact. The study followed a descriptive cross-sectional design and included 106 family physicians and 392 patients. An original questionnaire assessed computer use, participants' perspective of its impact, and patient centered strategies. Physicians reported spending 42% of consultation time in contact with the computer. A negative impact of computer in patient-physician communication regarding the consultation length, confidentiality, maintaining eye contact, active listening to the patient, and ability to understand the patient was reported by physicians, while patients reported a positive effect for all the items. Physicians considered that the usual computer placement in their consultation room was significantly unfavorable to patient-physician communication. Physicians perceive the impact of computer use on patient-physician communication as negative, while patients have a positive perception of computer use on patient-physician communication. Consultation support can represent a challenge to physicians who recognize its negative impact in patient centered orientation. Medical education programs aiming to enhance specific communication skills and to better integrate computer use in primary care settings are needed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Frequency modulation television analysis: Threshold impulse analysis. [with computer program

NASA Technical Reports Server (NTRS)

Hodge, W. H.

1973-01-01

A computer program is developed to calculate the FM threshold impulse rates as a function of the carrier-to-noise ratio for a specified FM system. The system parameters and a vector of 1024 integers, representing the probability density of the modulating voltage, are required as input parameters. The computer program is utilized to calculate threshold impulse rates for twenty-four sets of measured probability data supplied by NASA and for sinusoidal and Gaussian modulating waveforms. As a result of the analysis several conclusions are drawn: (1) The use of preemphasis in an FM television system improves the threshold by reducing the impulse rate. (2) Sinusoidal modulation produces a total impulse rate which is a practical upper bound for the impulse rates of TV signals providing the same peak deviations. (3) As the moment of the FM spectrum about the center frequency of the predetection filter increases, the impulse rate tends to increase. (4) A spectrum having an expected frequency above (below) the center frequency of the predetection filter produces a higher negative (positive) than positive (negative) impulse rate.

Random-access technique for modular bathymetry data storage in a continental shelf wave refraction program

NASA Technical Reports Server (NTRS)

Poole, L. R.

1974-01-01

A study was conducted of an alternate method for storage and use of bathymetry data in the Langley Research Center and Virginia Institute of Marine Science mid-Atlantic continental-shelf wave-refraction computer program. The regional bathymetry array was divided into 105 indexed modules which can be read individually into memory in a nonsequential manner from a peripheral file using special random-access subroutines. In running a sample refraction case, a 75-percent decrease in program field length was achieved by using the random-access storage method in comparison with the conventional method of total regional array storage. This field-length decrease was accompanied by a comparative 5-percent increase in central processing time and a 477-percent increase in the number of operating-system calls. A comparative Langley Research Center computer system cost savings of 68 percent was achieved by using the random-access storage method.

Activities at the Lunar and Planetary Institute

NASA Technical Reports Server (NTRS)

1985-01-01

The activities of the Lunar and Planetary Institute for the period July to December 1984 are discussed. Functions of its departments and projects are summarized. These include: planetary image center; library information center; computer center; production services; scientific staff; visitors program; scientific projects; conferences; workshops; seminars; publications and communications; panels, teams, committees and working groups; NASA-AMES vertical gun range (AVGR); and lunar and planetary science council.

Computer Assisted Testing at the Education Resource Center.

ERIC Educational Resources Information Center

Uffelman, Robert L.

The development of the Computer Assisted Testing (CAT) System at the University of Delaware is described. The introduction presents the background leading up to interactive terminal testing in 1973. Documentation for the system includes CAT System programs, format of questions for constructing test item pools, format for entering class lists,…

Pedagogy and Related Criteria: The Selection of Software for Computer Assisted Language Learning

ERIC Educational Resources Information Center

Samuels, Jeffrey D.

2013-01-01

Computer-Assisted Language Learning (CALL) is an established field of academic inquiry with distinct applications for second language teaching and learning. Many CALL professionals direct language labs or language resource centers (LRCs) in which CALL software applications and generic software applications support language learning programs and…

NASA Tech Briefs, March 1995

NASA Technical Reports Server (NTRS)

1995-01-01

This issue contains articles with a special focus on Computer-Aided design and engineering amd a research report on the Ames Research Center. Other subjects in this issue are: Electronic Components and Circuits, Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Manufacturing/Fabrication, Mathematics and Information Sciences and Life Sciences

Provision of Information to the Research Staff.

ERIC Educational Resources Information Center

Williams, Martha E.

The Information Sciences section at Illinois Institute of Technology Research Institute (IITRI) is now operating a Computer Search Center (CSC) for handling numerous machine-readable data bases. The computer programs are generalized in the sense that they will handle any incoming data base. This is accomplished by means of a preprocessor system…

Drone Control System

NASA Technical Reports Server (NTRS)

1983-01-01

Drones, subscale vehicles like the Firebees, and full scale retired military aircraft are used to test air defense missile systems. The DFCS (Drone Formation Control System) computer, developed by IBM (International Business Machines) Federal Systems Division, can track ten drones at once. A program called ORACLS is used to generate software to track and control Drones. It was originally developed by Langley and supplied by COSMIC (Computer Software Management and Information Center). The program saved the company both time and money.

User's manual for the REEDM (Rocket Exhaust Effluent Diffusion Model) computer program

NASA Technical Reports Server (NTRS)

Bjorklund, J. R.; Dumbauld, R. K.; Cheney, C. S.; Geary, H. V.

1982-01-01

The REEDM computer program predicts concentrations, dosages, and depositions downwind from normal and abnormal launches of rocket vehicles at NASA's Kennedy Space Center. The atmospheric dispersion models, cloud-rise models, and other formulas used in the REEDM model are described mathematically Vehicle and source parameters, other pertinent physical properties of the rocket exhaust cloud, and meteorological layering techniques are presented as well as user's instructions for REEDM. Worked example problems are included.

Rotordynamics on the PC: Transient Analysis With ARDS

NASA Technical Reports Server (NTRS)

Fleming, David P.

1997-01-01

Personal computers can now do many jobs that formerly required a large mainframe computer. An example is NASA Lewis Research Center's program Analysis of RotorDynamic Systems (ARDS), which uses the component mode synthesis method to analyze the dynamic motion of up to five rotating shafts. As originally written in the early 1980's, this program was considered large for the mainframe computers of the time. ARDS, which was written in Fortran 77, has been successfully ported to a 486 personal computer. Plots appear on the computer monitor via calls programmed for the original CALCOMP plotter; plots can also be output on a standard laser printer. The executable code, which uses the full array sizes of the mainframe version, easily fits on a high-density floppy disk. The program runs under DOS with an extended memory manager. In addition to transient analysis of blade loss, step turns, and base acceleration, with simulation of squeeze-film dampers and rubs, ARDS calculates natural frequencies and unbalance response.

Network model and short circuit program for the Kennedy Space Center electric power distribution system

NASA Technical Reports Server (NTRS)

1976-01-01

Assumptions made and techniques used in modeling the power network to the 480 volt level are discussed. Basic computational techniques used in the short circuit program are described along with a flow diagram of the program and operational procedures. Procedures for incorporating network changes are included in this user's manual.

MASPROP- MASS PROPERTIES OF A RIGID STRUCTURE

NASA Technical Reports Server (NTRS)

Hull, R. A.

1994-01-01

The computer program MASPROP was developed to rapidly calculate the mass properties of complex rigid structural systems. This program's basic premise is that complex systems can be adequately described by a combination of basic elementary structural shapes. Thirteen widely used basic structural shapes are available in this program. They are as follows: Discrete Mass, Cylinder, Truncated Cone, Torus, Beam (arbitrary cross section), Circular Rod (arbitrary cross section), Spherical Segment, Sphere, Hemisphere, Parallelepiped, Swept Trapezoidal Panel, Symmetric Trapezoidal Panels, and a Curved Rectangular Panel. MASPROP provides a designer with a simple technique that requires minimal input to calculate the mass properties of a complex rigid structure and should be useful in any situation where one needs to calculate the center of gravity and moments of inertia of a complex structure. Rigid body analysis is used to calculate mass properties. Mass properties are calculated about component axes that have been rotated to be parallel to the system coordinate axes. Then the system center of gravity is calculated and the mass properties are transferred to axes through the system center of gravity by using the parallel axis theorem. System weight, moments of inertia about the system origin, and the products of inertia about the system center of mass are calculated and printed. From the information about the system center of mass the principal axes of the system and the moments of inertia about them are calculated and printed. The only input required is simple geometric data describing the size and location of each element and the respective material density or weight of each element. This program is written in FORTRAN for execution on a CDC 6000 series computer with a central memory requirement of approximately 62K (octal) of 60 bit words. The development of this program was completed in 1978.

Center for Building Science: Annual report, FY 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cairns, E.J.; Rosenfeld, A.H.

1987-05-01

The Center for Building Science consists of four programs in the Applied Science Division: energy analysis, buildings energy systems, windows and lighting, and indoor environment. It was established to provide an umbrella so that goups in different programs but with similar interests could combine to perform joint research, develop new research areas, share resources, and produce joint publications. As detailed below, potential savings for the U.S. society from energy efficient buildings are enormous. But these savings can only be realized through an expanding federal RandD program that develops expertise in this new area. The Center for Building Science develops efficientmore » new building componenets, computer models, data and information systems, and trains needed builidng scientists. 135 refs., 72 figs., 18 tabs.« less

Education through the prism of computation

NASA Astrophysics Data System (ADS)

Kaurov, Vitaliy

2014-03-01

With the rapid development of technology, computation claims its irrevocable place among research components of modern science. Thus to foster a successful future scientist, engineer or educator we need to add computation to the foundations of scientific education. We will discuss what type of paradigm shifts it brings to these foundations on the example of Wolfram Science Summer School. It is one of the most advanced computational outreach programs run by Wolfram Foundation, welcoming participants of almost all ages and backgrounds. Centered on complexity science and physics, it also covers numerous adjacent and interdisciplinary fields such as finance, biology, medicine and even music. We will talk about educational and research experiences in this program during the 12 years of its existence. We will review statistics and outputs the program has produced. Among these are interactive electronic publications at the Wolfram Demonstrations Project and contributions to the computational knowledge engine Wolfram|Alpa.

Audiometric testing and hearing protection training through multimedia technology.

PubMed

Hong, OiSaeng; Csaszar, Peter

2005-09-01

The purpose of this paper is to present the development process of a computer-based audiometric testing and tailored intervention program, and assess its feasibility by obtaining users' feedback. The program was implemented for 397 operating engineers at their union training center, and its feasibility was evaluated by obtaining quantitative and qualitative feedback from the participants through a survey and focus group. Over 96% of the participants indicated they liked receiving a hearing test by computer; the computer-based test worked smoothly; and the computer-based training was well organized, effective and held their interests. Almost all (more than 99%) said they would recommend this program to other workers. This project is considered as one of the first ones incorporating multimedia computer technology with self-administered audiometric testing and tailored training. Participants' favorable feedback strongly supported the continued utilization of this approach for designing and developing health screening and intervention to promote healthy behaviors.

Shuttle Program Information Management System (SPIMS) data base

NASA Technical Reports Server (NTRS)

1983-01-01

The Shuttle Program Information Management System (SPIMS) is a computerized data base operations system. The central computer is the CDC 170-730 located at Johnson Space Center (JSC), Houston, Texas. There are several applications which have been developed and supported by SPIMS. A brief description is given.

The ToxCast Chemical Prioritization Program at the US EPA (UCLA Molecular Toxicology Program)

EPA Science Inventory

To meet the needs of chemical regulators reviewing large numbers of data-poor chemicals for safety, the EPA's National Center for Computational Toxicology is developing a means of efficiently testing thousands of compounds for potential toxicity. High-throughput bioactivity profi...

Iterative evaluation in a mobile counseling and testing program to reach people of color at risk for HIV--new strategies improve program acceptability, effectiveness, and evaluation capabilities.

PubMed

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2011-06-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program's results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention's HIV testing recommendations.

Computational Toxicology at the US EPA | Science Inventory ...

EPA Pesticide Factsheets

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in America’s air, water, and hazardous-waste sites. The ORD Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the EPA Science to Achieve Results (STAR) program. Key intramural projects of the CTRP include digitizing legacy toxicity testing information toxicity reference database (ToxRefDB), predicting toxicity (ToxCast™) and exposure (ExpoCast™), and creating virtual liver (v-Liver™) and virtual embryo (v-Embryo™) systems models. The models and underlying data are being made publicly available t

2001 Research Reports NASA/ASEE Summer Faculty Fellowship Program

NASA Technical Reports Server (NTRS)

2001-01-01

This document is a collection of technical reports on research conducted by the participants in the 2001 NASA/ASEE Summer Faculty Fellowship Program at the Kennedy Space Center (KSC). Research areas are broad. Some of the topics addressed include: project management, space shuttle safety risks induced by human factor errors, body wearable computers as a feasible delivery system for 'work authorization documents', gas leak detection using remote sensing technologies, a history of the Kennedy Space Center, and design concepts for collabsible cyrogenic storage vessels.

Experimental program for real gas flow code validation at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Deiwert, George S.; Strawa, Anthony W.; Sharma, Surendra P.; Park, Chul

1989-01-01

The experimental program for validating real gas hypersonic flow codes at NASA Ames Rsearch Center is described. Ground-based test facilities used include ballistic ranges, shock tubes and shock tunnels, arc jet facilities and heated-air hypersonic wind tunnels. Also included are large-scale computer systems for kinetic theory simulations and benchmark code solutions. Flight tests consist of the Aeroassist Flight Experiment, the Space Shuttle, Project Fire 2, and planetary probes such as Galileo, Pioneer Venus, and PAET.

Continuation of research into language concepts for the mission support environment

NASA Technical Reports Server (NTRS)

1991-01-01

A concept for a more intuitive and graphically based Computation (Comp) Builder was developed. The Graphical Comp Builder Prototype was developed, which is an X Window based graphical tool that allows the user to build Comps using graphical symbols. Investigation was conducted to determine the availability and suitability of the Ada programming language for the development of future control center type software. The Space Station Freedom Project identified Ada as the desirable programming language for the development of Space Station Control Center software systems.

The Center for Computational Biology: resources, achievements, and challenges

PubMed Central

Dinov, Ivo D; Thompson, Paul M; Woods, Roger P; Van Horn, John D; Shattuck, David W; Parker, D Stott

2011-01-01

The Center for Computational Biology (CCB) is a multidisciplinary program where biomedical scientists, engineers, and clinicians work jointly to combine modern mathematical and computational techniques, to perform phenotypic and genotypic studies of biological structure, function, and physiology in health and disease. CCB has developed a computational framework built around the Manifold Atlas, an integrated biomedical computing environment that enables statistical inference on biological manifolds. These manifolds model biological structures, features, shapes, and flows, and support sophisticated morphometric and statistical analyses. The Manifold Atlas includes tools, workflows, and services for multimodal population-based modeling and analysis of biological manifolds. The broad spectrum of biomedical topics explored by CCB investigators include the study of normal and pathological brain development, maturation and aging, discovery of associations between neuroimaging and genetic biomarkers, and the modeling, analysis, and visualization of biological shape, form, and size. CCB supports a wide range of short-term and long-term collaborations with outside investigators, which drive the center's computational developments and focus the validation and dissemination of CCB resources to new areas and scientific domains. PMID:22081221

The Center for Computational Biology: resources, achievements, and challenges.

PubMed

Toga, Arthur W; Dinov, Ivo D; Thompson, Paul M; Woods, Roger P; Van Horn, John D; Shattuck, David W; Parker, D Stott

2012-01-01

The Center for Computational Biology (CCB) is a multidisciplinary program where biomedical scientists, engineers, and clinicians work jointly to combine modern mathematical and computational techniques, to perform phenotypic and genotypic studies of biological structure, function, and physiology in health and disease. CCB has developed a computational framework built around the Manifold Atlas, an integrated biomedical computing environment that enables statistical inference on biological manifolds. These manifolds model biological structures, features, shapes, and flows, and support sophisticated morphometric and statistical analyses. The Manifold Atlas includes tools, workflows, and services for multimodal population-based modeling and analysis of biological manifolds. The broad spectrum of biomedical topics explored by CCB investigators include the study of normal and pathological brain development, maturation and aging, discovery of associations between neuroimaging and genetic biomarkers, and the modeling, analysis, and visualization of biological shape, form, and size. CCB supports a wide range of short-term and long-term collaborations with outside investigators, which drive the center's computational developments and focus the validation and dissemination of CCB resources to new areas and scientific domains.

Scientific and technical information output of the Langley Research Center for Calendar Year 1985

NASA Technical Reports Server (NTRS)

1986-01-01

A compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1985 is presented. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.

Scientific and technical information output of the Langley Research Center for calendar year 1984

NASA Technical Reports Server (NTRS)

1985-01-01

The scientific and technical information that the Langley Research Center produced during the calendar year 1984 is compiled. Approximately 1650 citations are included comprising formal reports, quick-release technical memorandums, contractor reports, journal articles and other publications, meeting presentations, technical talks, computer programs, tech briefs, and patents.

Teaching Technology with Technology. An Off-the-Shelf Robotics Course Builds Technical Center Enrollment.

ERIC Educational Resources Information Center

Hannemann, Jim; Rice, Thomas R.

1991-01-01

At the Oakland Technical Center, which provides vocational programs for nine Michigan high schools, a one-semester course in Foundations of Technology Systems uses a computer-simulated manufacturing environment to teach applied math, science, language arts, communication skills, problem solving, and teamwork in the context of technology education.…

Childcare service centers' preferences and intentions to use a web-based program to implement healthy eating and physical activity policies and practices: a cross-sectional study.

PubMed

Yoong, Sze Lin; Williams, Christopher Michael; Finch, Meghan; Wyse, Rebecca; Jones, Jannah; Freund, Megan; Wiggers, John Henry; Nathan, Nicole; Dodds, Pennie; Wolfenden, Luke

2015-04-30

Overweight and obesity is a significant public health problem that impacts a large number of children globally. Supporting childcare centers to deliver healthy eating and physical activity-promoting policies and practices is a recommended strategy for obesity prevention, given that such services provide access to a substantial proportion of children during a key developmental period. Electronic Web-based interventions represent a novel way to support childcare service providers to implement such policies and practices. This study aimed to assess: (1) childcare centers' current use of technology, (2) factors associated with intention to use electronic Web-based interventions, and (3) Web-based features that managers rated as useful to support staff with implementing healthy eating and physical activity-promoting policies and practices. A computer-assisted telephone interview (CATI) was conducted with service managers from long day care centers and preschools. The CATI assessed the following: (1) childcare center characteristics, (2) childcare centers' use of electronic devices, (3) intention to use a hypothetical electronic Web-based program-assessed using the Technology Acceptance Model (TAM) with ratings between 1 (strongly disagree) and 7 (strongly agree), and (4) features rated as useful to include in a Web-based program. Overall, 214 service centers out of 277 (77.3%) consented to participate. All service centers except 2 reported using computers (212/214, 99.1%), whereas 40.2% (86/214) used portable tablets. A total of 71.9% (151/210) of childcare service managers reported a score of 6 or more for intention to use a hypothetical electronic Web-based program. In a multivariable logistic regression analysis, intention to use the program was significantly associated with perceived ease of use (P=.002, odds ratio [OR] 3.9, 95% CI 1.6-9.2) and perceived usefulness (P<.001, OR 28,95% CI 8.0-95.2). Features reported by service managers as useful or very useful for a Web-based program included decision-support tools to support staff with menu planning (117/129, 90.7%), links to relevant resources (212/212, 100%), updated information on guidelines (208/212, 98.1%), and feedback regarding childcare center performance in relation to other childcare centers (212/212, 100%). Childcare service managers reported high intention to use a Web-based program and identified several useful features to support staff to implement healthy eating and physical activity policies and practices. Further descriptive and intervention research examining the development and use of such a program to support childcare centers with the implementation of healthy eating and physical activity-promoting policies and practices is warranted.

FY04 Engineering Technology Reports Laboratory Directed Research and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2004, and exemplifies Engineering's more than 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investmentmore » in technologies is carried out through two programs, the ''Tech Base'' program and the LDRD program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply technologies to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2004, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the long-term science and technology investments for the Directorate. The Centers represent technologies that have been identified as critical for the present and future work of the Laboratory, and are chartered to develop their respective areas. Their LDRD projects are the key resources to attain this competency, and, as such, nearly all of Engineering's portfolio falls under one of the five Centers. The Centers and their Directors are: (1) Center for Computational Engineering: Robert M. Sharpe; (2) Center for Microtechnology and Nanotechnology: Raymond P. Mariella, Jr.; (3) Center for Nondestructive Characterization: Harry E. Martz, Jr.; (4) Center for Precision Engineering: Keith Carlisle; and (5) Center for Complex Distributed Systems: Gregory J. Suski, Acting Director.« less

STARS: An Integrated, Multidisciplinary, Finite-Element, Structural, Fluids, Aeroelastic, and Aeroservoelastic Analysis Computer Program

NASA Technical Reports Server (NTRS)

Gupta, K. K.

1997-01-01

A multidisciplinary, finite element-based, highly graphics-oriented, linear and nonlinear analysis capability that includes such disciplines as structures, heat transfer, linear aerodynamics, computational fluid dynamics, and controls engineering has been achieved by integrating several new modules in the original STARS (STructural Analysis RoutineS) computer program. Each individual analysis module is general-purpose in nature and is effectively integrated to yield aeroelastic and aeroservoelastic solutions of complex engineering problems. Examples of advanced NASA Dryden Flight Research Center projects analyzed by the code in recent years include the X-29A, F-18 High Alpha Research Vehicle/Thrust Vectoring Control System, B-52/Pegasus Generic Hypersonics, National AeroSpace Plane (NASP), SR-71/Hypersonic Launch Vehicle, and High Speed Civil Transport (HSCT) projects. Extensive graphics capabilities exist for convenient model development and postprocessing of analysis results. The program is written in modular form in standard FORTRAN language to run on a variety of computers, such as the IBM RISC/6000, SGI, DEC, Cray, and personal computer; associated graphics codes use OpenGL and IBM/graPHIGS language for color depiction. This program is available from COSMIC, the NASA agency for distribution of computer programs.

ASTEC: Controls analysis for personal computers

NASA Technical Reports Server (NTRS)

Downing, John P.; Bauer, Frank H.; Thorpe, Christopher J.

1989-01-01

The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. The project is a follow-on to the INCA (INteractive Controls Analysis) program that has been developed at GSFC over the past five years. While ASTEC makes use of the algorithms and expertise developed for the INCA program, the user interface was redesigned to take advantage of the capabilities of the personal computer. The design philosophy and the current capabilities of the ASTEC software are described.

Knowledge management: Role of the the Radiation Safety Information Computational Center (RSICC)

NASA Astrophysics Data System (ADS)

Valentine, Timothy

2017-09-01

The Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory (ORNL) is an information analysis center that collects, archives, evaluates, synthesizes and distributes information, data and codes that are used in various nuclear technology applications. RSICC retains more than 2,000 software packages that have been provided by code developers from various federal and international agencies. RSICC's customers (scientists, engineers, and students from around the world) obtain access to such computing codes (source and/or executable versions) and processed nuclear data files to promote on-going research, to ensure nuclear and radiological safety, and to advance nuclear technology. The role of such information analysis centers is critical for supporting and sustaining nuclear education and training programs both domestically and internationally, as the majority of RSICC's customers are students attending U.S. universities. Additionally, RSICC operates a secure CLOUD computing system to provide access to sensitive export-controlled modeling and simulation (M&S) tools that support both domestic and international activities. This presentation will provide a general review of RSICC's activities, services, and systems that support knowledge management and education and training in the nuclear field.

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviews three computer software programs: (1) "The Children's Writing and Publishing Center"--writing and creative arts, grades 2-8, Apple II; (2) "Slide Shop"--graphics and desktop presentations, grades 4-12, Apple II and IBM; and (3) "Solve It"--problem solving and language arts, grades 4-12, Apple II. (MVL)

Microwave and Electron Beam Computer Programs

DTIC Science & Technology

1988-06-01

Research (ONR). SCRIBE was adapted by MRC from the Stanford Linear Accelerator Center Beam Trajectory Program, EGUN . oTIC NSECE Acc !,,o For IDL1C I...achieved with SCRIBE. It is a ver- sion of the Stanford Linear Accelerator (SLAC) code EGUN (Ref. 8), extensively modified by MRC for research on

The U.S. EPA's ToxCast Chemical Screening Program and Predictive Modeling of Toxicity

EPA Science Inventory

The ToxCast program was developed by the U.S. EPA's National Center for Computational Toxicology to provide cost-effective high-throughput screening for the potential toxicity of thousands of chemicals. Phase I screened 309 compounds in over 500 assays to evaluate concentration-...

Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.

ERIC Educational Resources Information Center

Busby, John C.; Johnson, Richard S.

Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…

Review of the activities of COSMIC

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

The activities of the Computer Software Management and Information Center involving the collection, processing, and distribution of software developed under the auspices of NASA and certain other federal agencies are reported. Program checkout and evaluation, inventory control, customer services and marketing, dissemination, program maintenance, and special development tasks are discussed.

Education Statistics on Disk. [CD-ROM.

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

This CD-ROM disk contains a computer program developed by the Office of Educational Research and Improvement to provide convenient access to the wealth of education statistics published by the National Center for Education Statistics (NCES). The program contains over 1,800 tables, charts, and text files from the following NCES publications,…

Program Evaluation in the Arts. An Annotated Bibliography.

ERIC Educational Resources Information Center

Wildemuth, Barbara M., Comp.; Eichinger, Debra S., Comp.

This 56-item annotated bibliography gives teachers and administrators access to information on the evaluation of school fine arts programs. Based upon a computer search of the Educational Resources Information Center (ERIC) data base, it cites project reports, journal articles, and dissertations published from 1963 to 1976. Citations of elementary…

ASCR Cybersecurity for Scientific Computing Integrity - Research Pathways and Ideas Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peisert, Sean; Potok, Thomas E.; Jones, Todd

At the request of the U.S. Department of Energy's (DOE) Office of Science (SC) Advanced Scientific Computing Research (ASCR) program office, a workshop was held June 2-3, 2015, in Gaithersburg, MD, to identify potential long term (10 to +20 year) cybersecurity fundamental basic research and development challenges, strategies and roadmap facing future high performance computing (HPC), networks, data centers, and extreme-scale scientific user facilities. This workshop was a follow-on to the workshop held January 7-9, 2015, in Rockville, MD, that examined higher level ideas about scientific computing integrity specific to the mission of the DOE Office of Science. Issues includedmore » research computation and simulation that takes place on ASCR computing facilities and networks, as well as network-connected scientific instruments, such as those run by various DOE Office of Science programs. Workshop participants included researchers and operational staff from DOE national laboratories, as well as academic researchers and industry experts. Participants were selected based on the submission of abstracts relating to the topics discussed in the previous workshop report [1] and also from other ASCR reports, including "Abstract Machine Models and Proxy Architectures for Exascale Computing" [27], the DOE "Preliminary Conceptual Design for an Exascale Computing Initiative" [28], and the January 2015 machine learning workshop [29]. The workshop was also attended by several observers from DOE and other government agencies. The workshop was divided into three topic areas: (1) Trustworthy Supercomputing, (2) Extreme-Scale Data, Knowledge, and Analytics for Understanding and Improving Cybersecurity, and (3) Trust within High-end Networking and Data Centers. Participants were divided into three corresponding teams based on the category of their abstracts. The workshop began with a series of talks from the program manager and workshop chair, followed by the leaders for each of the three topics and a representative of each of the four major DOE Office of Science Advanced Scientific Computing Research Facilities: the Argonne Leadership Computing Facility (ALCF), the Energy Sciences Network (ESnet), the National Energy Research Scientific Computing Center (NERSC), and the Oak Ridge Leadership Computing Facility (OLCF). The rest of the workshop consisted of topical breakout discussions and focused writing periods that produced much of this report.« less

Results of Computer Based Training.

ERIC Educational Resources Information Center

1978

This report compares the projected savings of using computer based training to conduct training for newly hired pilots to the results of that application. New Hire training, one of a number of programs conducted continuously at the United Airline Flight Operations Training Center, is designed to assure that any newly hired pilot will be able to…

ITERATIVE EVALUATION IN A MOBILE COUNSELING AND TESTING PROGRAM TO REACH PEOPLE OF COLOR AT RISK FOR HIV—NEW STRATEGIES IMPROVE PROGRAM ACCEPTABILITY, EFFECTIVENESS, AND EVALUATION CAPABILITIES

PubMed Central

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2016-01-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program’s results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention’s HIV testing recommendations. PMID:21689041

A method for calculating a real-gas two-dimensional nozzle contour including the effects of gamma

NASA Technical Reports Server (NTRS)

Johnson, C. B.; Boney, L. R.

1975-01-01

A method for calculating two-dimensional inviscid nozzle contours for a real gas or an ideal gas by the method of characteristics is described. The method consists of a modification of an existing nozzle computer program. The ideal-gas nozzle contour can be calculated for any constant value of gamma. Two methods of calculating the center-line boundary values of the Mach number in the throat region are also presented. The use of these three methods of calculating the center-line Mach number distribution in the throat region can change the distance from the throat to the inflection point by a factor of 2.5. A user's guide is presented for input to the computer program for both the two-dimensional and axisymmetric nozzle contours.

Multiphasic Health Testing in the Clinic Setting

PubMed Central

LaDou, Joseph

1971-01-01

The economy of automated multiphasic health testing (amht) activities patterned after the high-volume Kaiser program can be realized in low-volume settings. amht units have been operated at daily volumes of 20 patients in three separate clinical environments. These programs have displayed economics entirely compatible with cost figures published by the established high-volume centers. This experience, plus the expanding capability of small, general purpose, digital computers (minicomputers) indicates that a group of six or more physicians generating 20 laboratory appraisals per day can economically justify a completely automated multiphasic health testing facility. This system would reside in the clinic or hospital where it is used and can be configured to do analyses such as electrocardiography and generate laboratory reports, and communicate with large computer systems in university medical centers. Experience indicates that the most effective means of implementing these benefits of automation is to make them directly available to the medical community with the physician playing the central role. Economic justification of a dedicated computer through low-volume health testing then allows, as a side benefit, automation of administrative as well as other diagnostic activities—for example, patient billing, computer-aided diagnosis, and computer-aided therapeutics. PMID:4935771

Computer network access to scientific information systems for minority universities

NASA Astrophysics Data System (ADS)

Thomas, Valerie L.; Wakim, Nagi T.

1993-08-01

The evolution of computer networking technology has lead to the establishment of a massive networking infrastructure which interconnects various types of computing resources at many government, academic, and corporate institutions. A large segment of this infrastructure has been developed to facilitate information exchange and resource sharing within the scientific community. The National Aeronautics and Space Administration (NASA) supports both the development and the application of computer networks which provide its community with access to many valuable multi-disciplinary scientific information systems and on-line databases. Recognizing the need to extend the benefits of this advanced networking technology to the under-represented community, the National Space Science Data Center (NSSDC) in the Space Data and Computing Division at the Goddard Space Flight Center has developed the Minority University-Space Interdisciplinary Network (MU-SPIN) Program: a major networking and education initiative for Historically Black Colleges and Universities (HBCUs) and Minority Universities (MUs). In this paper, we will briefly explain the various components of the MU-SPIN Program while highlighting how, by providing access to scientific information systems and on-line data, it promotes a higher level of collaboration among faculty and students and NASA scientists.

SAM 2.1—A computer program for plotting and formatting surveying data for estimating peak discharges by the slope-area method

USGS Publications Warehouse

Hortness, J.E.

2004-01-01

The U.S. Geological Survey (USGS) measures discharge in streams using several methods. However, measurement of peak discharges is often impossible or impractical due to difficult access, inherent danger of making measurements during flood events, and timing often associated with flood events. Thus, many peak discharge values often are calculated after the fact by use of indirect methods. The most common indirect method for estimating peak dis- charges in streams is the slope-area method. This, like other indirect methods, requires measuring the flood profile through detailed surveys. Processing the survey data for efficient entry into computer streamflow models can be time demanding; SAM 2.1 is a program designed to expedite that process. The SAM 2.1 computer program is designed to be run in the field on a portable computer. The program processes digital surveying data obtained from an electronic surveying instrument during slope- area measurements. After all measurements have been completed, the program generates files to be input into the SAC (Slope-Area Computation program; Fulford, 1994) or HEC-RAS (Hydrologic Engineering Center-River Analysis System; Brunner, 2001) computer streamflow models so that an estimate of the peak discharge can be calculated.

Applied Computational Fluid Dynamics at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Holst, Terry L.; Kwak, Dochan (Technical Monitor)

1994-01-01

The field of Computational Fluid Dynamics (CFD) has advanced to the point where it can now be used for many applications in fluid mechanics research and aerospace vehicle design. A few applications being explored at NASA Ames Research Center will be presented and discussed. The examples presented will range in speed from hypersonic to low speed incompressible flow applications. Most of the results will be from numerical solutions of the Navier-Stokes or Euler equations in three space dimensions for general geometry applications. Computational results will be used to highlight the presentation as appropriate. Advances in computational facilities including those associated with NASA's CAS (Computational Aerosciences) Project of the Federal HPCC (High Performance Computing and Communications) Program will be discussed. Finally, opportunities for future research will be presented and discussed. All material will be taken from non-sensitive, previously-published and widely-disseminated work.

[Activities of Research Institute for Advanced Computer Science

NASA Technical Reports Server (NTRS)

Gross, Anthony R. (Technical Monitor); Leiner, Barry M.

2001-01-01

The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administrations missions. RIACS is located at the NASA Ames Research Center, Moffett Field, California. RIACS research focuses on the three cornerstones of IT research necessary to meet the future challenges of NASA missions: 1. Automated Reasoning for Autonomous Systems Techniques are being developed enabling spacecraft that will be self-guiding and self-correcting to the extent that they will require little or no human intervention. Such craft will be equipped to independently solve problems as they arise, and fulfill their missions with minimum direction from Earth. 2. Human-Centered Computing Many NASA missions require synergy between humans and computers, with sophisticated computational aids amplifying human cognitive and perceptual abilities. 3. High Performance Computing and Networking Advances in the performance of computing and networking continue to have major impact on a variety of NASA endeavors, ranging from modeling and simulation to analysis of large scientific datasets to collaborative engineering, planning and execution. In addition, RIACS collaborates with NASA scientists to apply IT research to a variety of NASA application domains. RIACS also engages in other activities, such as workshops, seminars, visiting scientist programs and student summer programs, designed to encourage and facilitate collaboration between the university and NASA IT research communities.

Computing Environments for Data Analysis. Part 3. Programming Environments.

DTIC Science & Technology

1986-05-21

to understand how the existing system works and how to modify them to get the desired effect. This depends on the programming ...editor that performs automatic syntax checking for all the programming languages. 3.3 How S fits in To make efficient use of the machine (maximize the... programming , manuscript from Symbolics, Inc., 5 Cambridge Center, Cambridge, Mass. 02142. [101 DEITEL H.M., (1983) An Introduction to Operating

Q3DG: A computer program for strain-energy-release rates for delamination growth in composite laminates

NASA Technical Reports Server (NTRS)

Raju, I. S.

1986-01-01

The Q3DG is a computer program developed to perform a quasi-three-dimensional stress analysis for composite laminates which may contain delaminations. The laminates may be subjected to mechanical, thermal, and hygroscopic loads. The program uses the finite element method and models the laminates with eight-noded parabolic isoparametric elements. The program computes the strain-energy-release components and the total strain-energy release in all three modes for delamination growth. A rectangular mesh and data file generator, DATGEN, is included. The DATGEN program can be executed interactively and is user friendly. The documentation includes sections dealing with the Q3D analysis theory, derivation of element stiffness matrices and consistent load vectors for the parabolic element. Several sample problems with the input for Q3DG and output from the program are included. The capabilities of the DATGEN program are illustrated with examples of interactive sessions. A microfiche of all the examples is included. The Q3DG and DATGEN programs have been implemented on CYBER 170 class computers. Q3DG and DATGEN were developed at the Langley Research Center during the early eighties and documented in 1984 to 1985.

Prediction of helicopter rotor discrete frequency noise: A computer program incorporating realistic blade motions and advanced acoustic formulation

NASA Technical Reports Server (NTRS)

Brentner, K. S.

1986-01-01

A computer program has been developed at the Langley Research Center to predict the discrete frequency noise of conventional and advanced helicopter rotors. The program, called WOPWOP, uses the most advanced subsonic formulation of Farassat that is less sensitive to errors and is valid for nearly all helicopter rotor geometries and flight conditions. A brief derivation of the acoustic formulation is presented along with a discussion of the numerical implementation of the formulation. The computer program uses realistic helicopter blade motion and aerodynamic loadings, input by the user, for noise calculation in the time domain. A detailed definition of all the input variables, default values, and output data is included. A comparison with experimental data shows good agreement between prediction and experiment; however, accurate aerodynamic loading is needed.

Vibroacoustic Payload Environment Prediction System (VAPEPS): VAPEPS management center remote access guide

NASA Technical Reports Server (NTRS)

Fernandez, J. P.; Mills, D.

1991-01-01

A Vibroacoustic Payload Environment Prediction System (VAPEPS) Management Center was established at the JPL. The center utilizes the VAPEPS software package to manage a data base of Space Shuttle and expendable launch vehicle payload flight and ground test data. Remote terminal access over telephone lines to the computer system, where the program resides, was established to provide the payload community a convenient means of querying the global VAPEPS data base. This guide describes the functions of the VAPEPS Management Center and contains instructions for utilizing the resources of the center.

The outcomes of anxiety, confidence, and self-efficacy with Internet health information retrieval in older adults: a pilot study.

PubMed

Chu, Adeline; Mastel-Smith, Beth

2010-01-01

Technology has a great impact on nursing practice. With the increasing numbers of older Americans using computers and the Internet in recent years, nurses have the capability to deliver effective and efficient health education to their patients and the community. Based on the theoretical framework of Bandura's self-efficacy theory, the pilot project reported findings from a 5-week computer course on Internet health searches in older adults, 65 years or older, at a senior activity learning center. Twelve participants were recruited and randomized to either the intervention or the control group. Measures of computer anxiety, computer confidence, and computer self-efficacy scores were analyzed at baseline, at the end of the program, and 6 weeks after the completion of the program. Analysis was conducted with repeated-measures analysis of variance. Findings showed participants who attended a structured computer course on Internet health information retrieval reported lowered anxiety and increased confidence and self-efficacy at the end of the 5-week program and 6 weeks after the completion of the program as compared with participants who were not in the program. The study demonstrated that a computer course can help reduce anxiety and increase confidence and self-efficacy in online health searches in older adults.

Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

Treesearch

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Computer Software Management and Information Center

NASA Technical Reports Server (NTRS)

1983-01-01

Computer programs for passive anti-roll tank, earth resources laboratory applications, the NIMBUS-7 coastal zone color scanner derived products, transportable applications executive, plastic and failure analysis of composites, velocity gradient method for calculating velocities in an axisymmetric annular duct, an integrated procurement management system, data I/O PRON for the Motorola exorcisor, aerodynamic shock-layer shape, kinematic modeling, hardware library for a graphics computer, and a file archival system are documented.

Computer Assisted Multi-Center Creation of Medical Knowledge Bases

PubMed Central

Giuse, Nunzia Bettinsoli; Giuse, Dario A.; Miller, Randolph A.

1988-01-01

Computer programs which support different aspects of medical care have been developed in recent years. Their capabilities range from diagnosis to medical imaging, and include hospital management systems and therapy prescription. In spite of their diversity these systems have one commonality: their reliance on a large body of medical knowledge in computer-readable form. This knowledge enables such programs to draw inferences, validate hypotheses, and in general to perform their intended task. As has been clear to developers of such systems, however, the creation and maintenance of medical knowledge bases are very expensive. Practical and economical difficulties encountered during this long-term process have discouraged most attempts. This paper discusses knowledge base creation and maintenance, with special emphasis on medical applications. We first describe the methods currently used and their limitations. We then present our recent work on developing tools and methodologies which will assist in the process of creating a medical knowledge base. We focus, in particular, on the possibility of multi-center creation of the knowledge base.

ASTEC and MODEL: Controls software development at Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Downing, John P.; Bauer, Frank H.; Surber, Jeffrey L.

1993-01-01

The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at the Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. In the last three years the ASTEC (Analysis and Simulation Tools for Engineering Controls) software has been under development. ASTEC is meant to be an integrated collection of controls analysis tools for use at the desktop level. MODEL (Multi-Optimal Differential Equation Language) is a translator that converts programs written in the MODEL language to FORTRAN. An upgraded version of the MODEL program will be merged into ASTEC. MODEL has not been modified since 1981 and has not kept with changes in computers or user interface techniques. This paper describes the changes made to MODEL in order to make it useful in the 90's and how it relates to ASTEC.

Center of Excellence for Hypersonics Research

DTIC Science & Technology

2012-01-25

detailed simulations of actual combustor configurations, and ultimately for the optimization of hypersonic air - breathing propulsion system flow paths... vehicle development programs. The Center engaged leading experts in experimental and computational analysis of hypersonic flows to provide research...advanced hypersonic vehicles and space access systems will require significant advances in the design methods and ground testing techniques to ensure

Scientific and technical information output of the Langley Research Center for calendar year 1980

NASA Technical Reports Server (NTRS)

1981-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1980. Approximately 1400 citations are given. Formal reports, quick-release technical memorandums, contractor reports, journal articles, meeting/conference papers, computer programs, tech briefs, patents, and unpublished research are included.

Scientific and technical information output of the Langley Research Center for calendar year 1986

NASA Technical Reports Server (NTRS)

1987-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1986. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Techncial Talks, Computer Programs, Tech Briefs, and Patents.

Capability Extension to the Turbine Off-Design Computer Program AXOD With Applications to the Highly Loaded Fan-Drive Turbines

NASA Technical Reports Server (NTRS)

Chen, Shu-cheng S.

2011-01-01

The axial flow turbine off-design computer program AXOD has been upgraded to include the outlet guide vane (OGV) into its acceptable turbine configurations. The mathematical bases and the techniques used for the code implementation are described and discussed in lengths in this paper. This extended capability is verified and validated with two cases of highly loaded fan-drive turbines, designed and tested in the V/STOL Program of NASA. The first case is a 4 1/2-stage turbine with an average stage loading factor of 4.66, designed by Pratt & Whitney Aircraft. The second case is a 3 1/2-stage turbine with an average loading factor of 4.0, designed in-house by the NASA Lewis Research Center (now the NASA Glenn Research Center). Both cases were experimentally tested in the turbine facility located at the Glenn Research Center. The processes conducted in these studies are described in detail in this paper, and the results in comparison with the experimental data are presented and discussed. The comparisons between the AXOD results and the experimental data are in excellent agreement.

Integrated analysis of engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1981-01-01

The need for light, durable, fuel efficient, cost effective aircraft requires the development of engine structures which are flexible, made from advaced materials (including composites), resist higher temperatures, maintain tighter clearances and have lower maintenance costs. The formal quantification of any or several of these requires integrated computer programs (multilevel and/or interdisciplinary analysis programs interconnected) for engine structural analysis/design. Several integrated analysis computer prorams are under development at Lewis Reseach Center. These programs include: (1) COBSTRAN-Composite Blade Structural Analysis, (2) CODSTRAN-Composite Durability Structural Analysis, (3) CISTRAN-Composite Impact Structural Analysis, (4) STAEBL-StruTailoring of Engine Blades, and (5) ESMOSS-Engine Structures Modeling Software System. Three other related programs, developed under Lewis sponsorship, are described.

EPA-Health Canada CompTox Collaboration

EPA Science Inventory

Research program of EPA’s National Center for Computational Toxicology addresses chemical screening and prioritization needs for pesticidal inerts, anti-microbials, CCLs, HPVs and MPVs, comprehensive use of HTS technologies to generate.

NIMH Prototype Management Information System for Community Mental Health Centers

PubMed Central

Wurster, Cecil R.; Goodman, John D.

1980-01-01

Various approaches to centralized support of computer applications in health care are described. The NIMH project to develop a prototype Management Information System (MIS) for community mental health centers is presented and discussed as a centralized development of an automated data processing system for multiple user organizations. The NIMH program is summarized, the prototype MIS is characterized, and steps taken to provide for the differing needs of the mental health centers are highlighted.

An Improved Theoretical Aerodynamic Derivatives Computer Program for Sounding Rockets

NASA Technical Reports Server (NTRS)

Barrowman, J. S.; Fan, D. N.; Obosu, C. B.; Vira, N. R.; Yang, R. J.

1979-01-01

The paper outlines a Theoretical Aerodynamic Derivatives (TAD) computer program for computing the aerodynamics of sounding rockets. TAD outputs include normal force, pitching moment and rolling moment coefficient derivatives as well as center-of-pressure locations as a function of the flight Mach number. TAD is applicable to slender finned axisymmetric vehicles at small angles of attack in subsonic and supersonic flows. TAD improvement efforts include extending Mach number regions of applicability, improving accuracy, and replacement of some numerical integration algorithms with closed-form integrations. Key equations used in TAD are summarized and typical TAD outputs are illustrated for a second-stage Tomahawk configuration.

EDCATS: An Evaluation Tool

NASA Technical Reports Server (NTRS)

Heard, Pamala D.

1998-01-01

The purpose of this research is to explore the development of Marshall Space Flight Center Unique Programs. These academic tools provide the Education Program Office with important information from the Education Computer Aided Tracking System (EDCATS). This system is equipped to provide on-line data entry, evaluation, analysis, and report generation, with full archiving for all phases of the evaluation process. Another purpose is to develop reports and data that is tailored to Marshall Space Flight Center Unique Programs. It also attempts to acquire knowledge on how, why, and where information is derived. As a result, a user will be better prepared to decide which available tool is the most feasible for their reports.

CAD/CAE Integration Enhanced by New CAD Services Standard

NASA Technical Reports Server (NTRS)

Claus, Russell W.

2002-01-01

A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

HYDES: A generalized hybrid computer program for studying turbojet or turbofan engine dynamics

NASA Technical Reports Server (NTRS)

Szuch, J. R.

1974-01-01

This report describes HYDES, a hybrid computer program capable of simulating one-spool turbojet, two-spool turbojet, or two-spool turbofan engine dynamics. HYDES is also capable of simulating two- or three-stream turbofans with or without mixing of the exhaust streams. The program is intended to reduce the time required for implementing dynamic engine simulations. HYDES was developed for running on the Lewis Research Center's Electronic Associates (EAI) 690 Hybrid Computing System and satisfies the 16384-word core-size and hybrid-interface limits of that machine. The program could be modified for running on other computing systems. The use of HYDES to simulate a single-spool turbojet and a two-spool, two-stream turbofan engine is demonstrated. The form of the required input data is shown and samples of output listings (teletype) and transient plots (x-y plotter) are provided. HYDES is shown to be capable of performing both steady-state design and off-design analyses and transient analyses.

Wayne Township Public Library, Final Performance Report for Library Services and Construction Act (LSCA) Title VI, Library Literacy Program.

ERIC Educational Resources Information Center

Smyth, Carol B.; Grannell, Dorothy S.; Moore, Miriam

The Literacy Resource Center project, a program of the Wayne Township Public Library also known as the Morrisson-Reeves Library (Richmond, Indiana), involved recruitment, retention, coalition building, public awareness, training, basic literacy, collection development, tutoring, computer-assisted, other technology, employment oriented,…

Five C Framework: A Student-Centered Approach for Teaching Programming Courses to Students with Diverse Disciplinary Background

ERIC Educational Resources Information Center

Tom, Mary

2015-01-01

The already existing complexities of teaching and learning computer programming are increased where students are diverse in their disciplinary backgrounds, language skills, and culture. Learners experience emotional issues of anxiety, fear or boredom. Identifying opportunities for improvement and applying theoretical and empirical evidence found…

Special Partners: Handicapped Students and Their Peers Pair Up for Computer Tutoring.

ERIC Educational Resources Information Center

O'Connor, Robert T.

1986-01-01

The Special Partners programs at Mill Swan Communications Skill Center Magnet School brings together 16 special needs students, aged 9-17, with fifth- and sixth-grade tutors. The program results in enhanced academic skills and in the development of mutual respect between the special needs children and their partners. (GC)

High School Apprenticeship: Eleven Years of Benefits to the U.S. Army Chemical Research, Development and Engineering Center

DTIC Science & Technology

1992-09-01

8217. Patrick Engram Palantiri 18. Maria Horsey Data Base Program 19. John Kelley A Curve-Fitting Program for Behavioral Studies 20. Ingrid Kohlstadt Computers...SP-85010 AUTHOR TITLE 1. Patrick Engram IR Smoke Pots 2. Denise Hammond Triple Quadruple Mass Spectrometry of Dimethylmethylphosphonate 3. Kelly

Business aspects of cardiovascular computed tomography: tackling the challenges.

PubMed

Bateman, Timothy M

2008-01-01

The purpose of this article is to provide a comprehensive understanding of the business issues surrounding provision of dedicated cardiovascular computed tomographic imaging. Some of the challenges include high up-front costs, current low utilization relative to scanner capability, and inadequate payments. Cardiovascular computed tomographic imaging is a valuable clinical modality that should be offered by cardiovascular centers-of-excellence. With careful consideration of the business aspects, moderate-to-large size cardiology programs should be able to implement an economically viable cardiovascular computed tomographic service.

Software Simplifies the Sharing of Numerical Models

NASA Technical Reports Server (NTRS)

2014-01-01

To ease the sharing of climate models with university students, Goddard Space Flight Center awarded SBIR funding to Reston, Virginia-based Parabon Computation Inc., a company that specializes in cloud computing. The firm developed a software program capable of running climate models over the Internet, and also created an online environment for people to collaborate on developing such models.

From the Bench to the Clinic Part 1: Martin McIntosh, Ph.D., Introduces His Lab's Immunotherapy Research | Office of Cancer Genomics

Cancer.gov

The field of immunotherapy is rapidly advancing and genomics techniques are being incorporated to add a “precision” approach. OCG spoke with two CTD2 investigators from the Fred Hutchinson Cancer Research Center (FHCRC) about new advances in immunotherapy. For the first article of this two-part series, we interviewed Martin McIntosh, Ph.D., member of the Fred Hutchinson Translational Research program and previously Program Head in Computational Biology at FHCRC/University of Washington Comprehensive Cancer Center.

Automating Veterans Administration libraries: II. Implementation at the Kansas City Medical Center Library.

PubMed

Smith, V K; Ting, S C

1987-04-01

In 1985, the Kansas City Veterans Administration Medical Center began implementation of the Decentralized Hospital Computer Program (DHCP). An integrated library system, a subset of that program, was started by the medical library for acquisitions and an outline catalog. To test the system, staff of the Neurology Service were trained to use the outline catalog and electronic mail to request interlibrary loans and literature searches. In implementing the project with the Neurology Service, the library is paving the way for many types of electronic access and interaction with the library.

Software For Monitoring A Computer Network

NASA Technical Reports Server (NTRS)

Lee, Young H.

1992-01-01

SNMAT is rule-based expert-system computer program designed to assist personnel in monitoring status of computer network and identifying defective computers, workstations, and other components of network. Also assists in training network operators. Network for SNMAT located at Space Flight Operations Center (SFOC) at NASA's Jet Propulsion Laboratory. Intended to serve as data-reduction system providing windows, menus, and graphs, enabling users to focus on relevant information. SNMAT expected to be adaptable to other computer networks; for example in management of repair, maintenance, and security, or in administration of planning systems, billing systems, or archives.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

User's manual for EZPLOT version 5.5: A FORTRAN program for 2-dimensional graphic display of data

NASA Technical Reports Server (NTRS)

Garbinski, Charles; Redin, Paul C.; Budd, Gerald D.

1988-01-01

EZPLOT is a computer applications program that converts data resident on a file into a plot displayed on the screen of a graphics terminal. This program generates either time history or x-y plots in response to commands entered interactively from a terminal keyboard. Plot parameters consist of a single independent parameter and from one to eight dependent parameters. Various line patterns, symbol shapes, axis scales, text labels, and data modification techniques are available. This user's manual describes EZPLOT as it is implemented on the Ames Research Center, Dryden Research Facility ELXSI computer using DI-3000 graphics software tools.

Integrating Laptop Computers into Classroom: Attitudes, Needs, and Professional Development of Science Teachers—A Case Study

NASA Astrophysics Data System (ADS)

Klieger, Aviva; Ben-Hur, Yehuda; Bar-Yossef, Nurit

2010-04-01

The study examines the professional development of junior-high-school teachers participating in the Israeli "Katom" (Computer for Every Class, Student and Teacher) Program, begun in 2004. A three-circle support and training model was developed for teachers' professional development. The first circle applies to all teachers in the program; the second, to all teachers at individual schools; the third to teachers of specific disciplines. The study reveals and describes the attitudes of science teachers to the integration of laptop computers and to the accompanying professional development model. Semi-structured interviews were conducted with eight science teachers from the four schools participating in the program. The interviews were analyzed according to the internal relational framework taken from the information that arose from the interviews. Two factors influenced science teachers' professional development: (1) Introduction of laptops to the teachers and students. (2) The support and training system. Interview analysis shows that the disciplinary training is most relevant to teachers and they are very interested in belonging to the professional science teachers' community. They also prefer face-to-face meetings in their school. Among the difficulties they noted were the new learning environment, including control of student computers, computer integration in laboratory work and technical problems. Laptop computers contributed significantly to teachers' professional and personal development and to a shift from teacher-centered to student-centered teaching. One-to-One laptops also changed the schools' digital culture. The findings are important for designing concepts and models for professional development when introducing technological innovation into the educational system.

Experiences at Langley Research Center in the application of optimization techniques to helicopter airframes for vibration reduction

NASA Technical Reports Server (NTRS)

Murthy, T. Sreekanta; Kvaternik, Raymond G.

1991-01-01

A NASA/industry rotorcraft structural dynamics program known as Design Analysis Methods for VIBrationS (DAMVIBS) was initiated at Langley Research Center in 1984 with the objective of establishing the technology base needed by the industry for developing an advanced finite-element-based vibrations design analysis capability for airframe structures. As a part of the in-house activities contributing to that program, a study was undertaken to investigate the use of formal, nonlinear programming-based, numerical optimization techniques for airframe vibrations design work. Considerable progress has been made in connection with that study since its inception in 1985. This paper presents a unified summary of the experiences and results of that study. The formulation and solution of airframe optimization problems are discussed. Particular attention is given to describing the implementation of a new computational procedure based on MSC/NASTRAN and CONstrained function MINimization (CONMIN) in a computer program system called DYNOPT for the optimization of airframes subject to strength, frequency, dynamic response, and fatigue constraints. The results from the application of the DYNOPT program to the Bell AH-1G helicopter are presented and discussed.

MIT Laboratory for Computer Science Progress Report, July 1984-June 1985

DTIC Science & Technology

1985-06-01

larger (up to several thousand machines) multiprocessor systems. This facility, funded by the newly formed Strategic Computing Program of the Defense...Szolovits, Group Leader R. Patil Collaborating Investigators M. Criscitiello, M.D., Tufts-New England Medical Center Hospital J. Dzierzanowski, Ph.D., Dept...COMPUTATION STRUCTURES Academic Staff J. B. Dennis, Group Leader Research Staff W. B. Ackerman G. A. Boughton W. Y-P. Lim Graduate Students T-A. Chu S

RIACS

NASA Technical Reports Server (NTRS)

Moore, Robert C.

1998-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: (1) Automated Reasoning. (2) Human-Centered Computing. and (3) High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling.

An interactive NASTRAN preprocessor. [graphic display of undeformed structure using CDC 6000 series computer

NASA Technical Reports Server (NTRS)

Smith, W. W.

1973-01-01

A Langley Research Center version of NASTRAN Level 15.1.0 designed to provide the analyst with an added tool for debugging massive NASTRAN input data is described. The program checks all NASTRAN input data cards and displays on a CRT the graphic representation of the undeformed structure. In addition, the program permits the display and alteration of input data and allows reexecution without physically resubmitting the job. Core requirements on the CDC 6000 computer are approximately 77,000 octal words of central memory.

Assess/Mitigate Risk through the Use of Computer-Aided Software Engineering (CASE) Tools

NASA Technical Reports Server (NTRS)

Aguilar, Michael L.

2013-01-01

The NASA Engineering and Safety Center (NESC) was requested to perform an independent assessment of the mitigation of the Constellation Program (CxP) Risk 4421 through the use of computer-aided software engineering (CASE) tools. With the cancellation of the CxP, the assessment goals were modified to capture lessons learned and best practices in the use of CASE tools. The assessment goal was to prepare the next program for the use of these CASE tools. The outcome of the assessment is contained in this document.

Conversion of the CALAP (Computer Aided Landform Analysis Program) Program from FORTRAN to DUCK.

DTIC Science & Technology

1986-09-01

J’ DUCK artificial intelligence logic programming 20 AVrACT (Cthm m reerse stabN ameeaaW idelfr by block mbae) An expert advisor program named CALAP...original program was developed in FORTRAN on an HP- 1000, a mirticomputer. CALAP was reprogrammed in an Artificial Intelligence (AI) language called DUCK...the Artificial Intelligence Center, U.S. Army Engineer Topographic Laboratory, Fort Belvoir. Z" I. S. n- Page 1 I. Introduction An expert advisor

Computing, information, and communications: Technologies for the 21. Century

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-11-01

To meet the challenges of a radically new and technologically demanding century, the Federal Computing, Information, and Communications (CIC) programs are investing in long-term research and development (R and D) to advance computing, information, and communications in the United States. CIC R and D programs help Federal departments and agencies to fulfill their evolving missions, assure the long-term national security, better understand and manage the physical environment, improve health care, help improve the teaching of children, provide tools for lifelong training and distance learning to the workforce, and sustain critical US economic competitiveness. One of the nine committees of themore » National Science and Technology Council (NSTC), the Committee on Computing, Information, and Communications (CCIC)--through its CIC R and D Subcommittee--coordinates R and D programs conducted by twelve Federal departments and agencies in cooperation with US academia and industry. These R and D programs are organized into five Program Component Areas: (1) HECC--High End Computing and Computation; (2) LSN--Large Scale Networking, including the Next Generation Internet Initiative; (3) HCS--High Confidence Systems; (4) HuCS--Human Centered Systems; and (5) ETHR--Education, Training, and Human Resources. A brief synopsis of FY 1997 accomplishments and FY 1998 goals by PCA is presented. This report, which supplements the President`s Fiscal Year 1998 Budget, describes the interagency CIC programs.« less

A computer program for the prediction of near field noise of aircraft in cruising flight: User's guide

NASA Technical Reports Server (NTRS)

Tibbetts, J. G.

1980-01-01

Detailed instructions for using the near field cruise noise prediction program, a program listing, and a sample case with output are presented. The total noise for free field lossless conditions at selected observer locations is obtained by summing the contributions from up to nine acoustic sources. These noise sources, selected at the user's option, include the fan/compressor, turbine, core (combustion), jet, shock, and airframe (trailing edge and turbulent boundary layers). The effects of acoustic suppression materials such as engine inlet treatment may also be included in the noise prediction. The program is available for use on the NASA/Langley Research Center CDC computer. Comparisons of the program predictions with measured data are also given, and some possible reasons for their lack of agreement presented.

Shuttle Data Center File-Processing Tool in Java

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Miller, Walter H.

2006-01-01

A Java-language computer program has been written to facilitate mining of data in files in the Shuttle Data Center (SDC) archives. This program can be executed on a variety of workstations or via Web-browser programs. This program is partly similar to prior C-language programs used for the same purpose, while differing from those programs in that it exploits the platform-neutrality of Java in implementing several features that are important for analysis of large sets of time-series data. The program supports regular expression queries of SDC archive files, reads the files, interleaves the time-stamped samples according to a chosen output, then transforms the results into that format. A user can choose among a variety of output file formats that are useful for diverse purposes, including plotting, Markov modeling, multivariate density estimation, and wavelet multiresolution analysis, as well as for playback of data in support of simulation and testing.

Multidisciplinary High-Fidelity Analysis and Optimization of Aerospace Vehicles. Part 1; Formulation

NASA Technical Reports Server (NTRS)

Walsh, J. L.; Townsend, J. C.; Salas, A. O.; Samareh, J. A.; Mukhopadhyay, V.; Barthelemy, J.-F.

2000-01-01

An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity, finite element structural analysis and computational fluid dynamics aerodynamic analysis in a distributed, heterogeneous computing environment that includes high performance parallel computing. A software system has been designed and implemented to integrate a set of existing discipline analysis codes, some of them computationally intensive, into a distributed computational environment for the design of a highspeed civil transport configuration. The paper describes the engineering aspects of formulating the optimization by integrating these analysis codes and associated interface codes into the system. The discipline codes are integrated by using the Java programming language and a Common Object Request Broker Architecture (CORBA) compliant software product. A companion paper presents currently available results.

Multidisciplinary High-Fidelity Analysis and Optimization of Aerospace Vehicles. Part 2; Preliminary Results

NASA Technical Reports Server (NTRS)

Walsh, J. L.; Weston, R. P.; Samareh, J. A.; Mason, B. H.; Green, L. L.; Biedron, R. T.

2000-01-01

An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity finite-element structural analysis and computational fluid dynamics aerodynamic analysis in a distributed, heterogeneous computing environment that includes high performance parallel computing. A software system has been designed and implemented to integrate a set of existing discipline analysis codes, some of them computationally intensive, into a distributed computational environment for the design of a high-speed civil transport configuration. The paper describes both the preliminary results from implementing and validating the multidisciplinary analysis and the results from an aerodynamic optimization. The discipline codes are integrated by using the Java programming language and a Common Object Request Broker Architecture compliant software product. A companion paper describes the formulation of the multidisciplinary analysis and optimization system.

Computer aided reliability, availability, and safety modeling for fault-tolerant computer systems with commentary on the HARP program

NASA Technical Reports Server (NTRS)

Shooman, Martin L.

1991-01-01

Many of the most challenging reliability problems of our present decade involve complex distributed systems such as interconnected telephone switching computers, air traffic control centers, aircraft and space vehicles, and local area and wide area computer networks. In addition to the challenge of complexity, modern fault-tolerant computer systems require very high levels of reliability, e.g., avionic computers with MTTF goals of one billion hours. Most analysts find that it is too difficult to model such complex systems without computer aided design programs. In response to this need, NASA has developed a suite of computer aided reliability modeling programs beginning with CARE 3 and including a group of new programs such as: HARP, HARP-PC, Reliability Analysts Workbench (Combination of model solvers SURE, STEM, PAWS, and common front-end model ASSIST), and the Fault Tree Compiler. The HARP program is studied and how well the user can model systems using this program is investigated. One of the important objectives will be to study how user friendly this program is, e.g., how easy it is to model the system, provide the input information, and interpret the results. The experiences of the author and his graduate students who used HARP in two graduate courses are described. Some brief comparisons were made with the ARIES program which the students also used. Theoretical studies of the modeling techniques used in HARP are also included. Of course no answer can be any more accurate than the fidelity of the model, thus an Appendix is included which discusses modeling accuracy. A broad viewpoint is taken and all problems which occurred in the use of HARP are discussed. Such problems include: computer system problems, installation manual problems, user manual problems, program inconsistencies, program limitations, confusing notation, long run times, accuracy problems, etc.

Strategic Computing Computer Vision: Taking Image Understanding To The Next Plateau

NASA Astrophysics Data System (ADS)

Simpson, R. L., Jr.

1987-06-01

The overall objective of the Strategic Computing (SC) Program of the Defense Advanced Research Projects Agency (DARPA) is to develop and demonstrate a new generation of machine intelligence technology which can form the basis for more capable military systems in the future and also maintain a position of world leadership for the US in computer technology. Begun in 1983, SC represents a focused research strategy for accelerating the evolution of new technology and its rapid prototyping in realistic military contexts. Among the very ambitious demonstration prototypes being developed within the SC Program are: 1) the Pilot's Associate which will aid the pilot in route planning, aerial target prioritization, evasion of missile threats, and aircraft emergency safety procedures during flight; 2) two battle management projects one for the for the Army, which is just getting started, called the AirLand Battle Management program (ALBM) which will use knowledge-based systems technology to assist in the generation and evaluation of tactical options and plans at the Corps level; 3) the other more established program for the Navy is the Fleet Command Center Battle Management Program (FCCBIVIP) at Pearl Harbor. The FCCBMP is employing knowledge-based systems and natural language technology in a evolutionary testbed situated in an operational command center to demonstrate and evaluate intelligent decision-aids which can assist in the evaluation of fleet readiness and explore alternatives during contingencies; and 4) the Autonomous Land Vehicle (ALV) which integrates in a major robotic testbed the technologies for dynamic image understanding, knowledge-based route planning with replanning during execution, hosted on new advanced parallel architectures. The goal of the Strategic Computing computer vision technology base (SCVision) is to develop generic technology that will enable the construction of complete, robust, high performance image understanding systems to support a wide range of DoD applications. Possible applications include autonomous vehicle navigation, photointerpretation, smart weapons, and robotic manipulation. This paper provides an overview of the technical and program management plans being used in evolving this critical national technology.

How to manage continuing education and retraining programs on optical physics and laser technology at a university: Moscow State experience

NASA Astrophysics Data System (ADS)

Zadkov, Victor N.; Koroteev, Nikolai I.

1995-10-01

An experience of managing the continuing education and retraining programs at the International Laser Center (ILC) of Moscow State University is discussed. The offered programs are in a wide range of areas, namely laser physics and technology, laser biophysics and biomedicine, laser chemistry, and computers in laser physics. The attendees who are presumably scientists, engineers, technical managers, and graduate students can join these programs through the annual ILC term (6 months), individual training and research programs (up to a year), annual ILC Laser Graduate School, graduate study, and post-docs program, which are reviewed in the paper. A curriculum that includes basic and specialized courses is described in detail. A brief description of the ILC Laser Teaching and Computer Labs that support all the educational courses is given as well.

SOURCE WATER AREA DELINEATION OF PUBLIC WATER SUPPLY WELLS USING WHAEM2000. INTERNATIONAL GROUND WATER MODELING CENTER NEWSLETTER, V.19(1):4

EPA Science Inventory

WhAEM2000 is computer program that solves steady state ground-water flow and advective streamlines in homogeneous, single layer aquifers. The program was designed for capture zone delineation in support of protection of the source water area surrounding public water supply well...

A Unique Delivery System to Rural Schools: The NMSU-Space Center Microcomputer Van Program.

ERIC Educational Resources Information Center

Amodeo, Luiza B.; And Others

Collaboration between New Mexico State University's College of Education and three other entities has led to the computer experience microvan program, implemented in 1983, a unique system for bringing microcomputers into rural New Mexico K-12 classrooms. The International Space Hall of Fame Foundation provides the van, International Space Center…

Particle trajectory computer program for icing analysis of axisymmetric bodies

NASA Technical Reports Server (NTRS)

Frost, Walter; Chang, Ho-Pen; Kimble, Kenneth R.

1982-01-01

General aviation aircraft and helicopters exposed to an icing environment can accumulate ice resulting in a sharp increase in drag and reduction of maximum lift causing hazardous flight conditions. NASA Lewis Research Center (LeRC) is conducting a program to examine, with the aid of high-speed computer facilities, how the trajectories of particles contribute to the ice accumulation on airfoils and engine inlets. This study, as part of the NASA/LeRC research program, develops a computer program for the calculation of icing particle trajectories and impingement limits relative to axisymmetric bodies in the leeward-windward symmetry plane. The methodology employed in the current particle trajectory calculation is to integrate the governing equations of particle motion in a flow field computed by the Douglas axisymmetric potential flow program. The three-degrees-of-freedom (horizontal, vertical, and pitch) motion of the particle is considered. The particle is assumed to be acted upon by aerodynamic lift and drag forces, gravitational forces, and for nonspherical particles, aerodynamic moments. The particle momentum equation is integrated to determine the particle trajectory. Derivation of the governing equations and the method of their solution are described in Section 2.0. General features, as well as input/output instructions for the particle trajectory computer program, are described in Section 3.0. The details of the computer program are described in Section 4.0. Examples of the calculation of particle trajectories demonstrating application of the trajectory program to given axisymmetric inlet test cases are presented in Section 5.0. For the examples presented, the particles are treated as spherical water droplets. In Section 6.0, limitations of the program relative to excessive computer time and recommendations in this regard are discussed.

Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image

Treesearch

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

SDC DOCUMENTS APPLICABLE TO STATE AND LOCAL GOVERNMENT PROBLEMS.

DTIC Science & Technology

Public administration , Urban and regional planning, The administration of justice, Bio-medical systems, Educational systems, Computer program systems, The development and management of computer-based systems, Information retrieval, Simulation. AD numbers are provided for those documents which can be obtained from the Defense Documentation Center or the Department of Commerce’s Clearinghouse for Federal Scientific and Technical Information.

Assisting People with Developmental Disabilities to Improve Computer Pointing Efficiency through Multiple Mice and Automatic Pointing Assistive Programs

ERIC Educational Resources Information Center

Shih, Ching-Hsiang

2011-01-01

This study combines multi-mice technology (people with disabilities can use standard mice, instead of specialized alternative computer input devices, to achieve complete mouse operation) with an assistive pointing function (i.e. cursor-capturing, which enables the user to move the cursor to the target center automatically), to assess whether two…

A Comprehensive Review of Computer Science and Data Processing Education in Community Colleges and Area Vocational-Technical Centers.

ERIC Educational Resources Information Center

Florida State Community Coll. Coordinating Board, Tallahassee.

In 1987-88, the Florida State Board of Community Colleges and the Division of Vocational, Adult, and Community Education jointly conducted a review of instructional programs in computer science and data processing in order to determine needs for state policy changes and funding priorities. The process involved a review of printed resources on…

Human computer interface guide, revision A

NASA Technical Reports Server (NTRS)

1993-01-01

The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

A cross-sectional study of the effects of load carriage on running characteristics and tibial mechanical stress: implications for stress fracture injuries in women

DTIC Science & Technology

2017-03-23

performance computing resources made available by the US Department of Defense High Performance Computing Modernization Program at the Air Force...1Department of Defense Biotechnology High Performance Computing Software Applications Institute, Telemedicine and Advanced Technology Research Center, United...States Army Medical Research and Materiel Command, Fort Detrick, Maryland, USA Full list of author information is available at the end of the article

Speech recognition-based and automaticity programs to help students with severe reading and spelling problems.

PubMed

Higgins, Eleanor L; Raskind, Marshall H

2004-12-01

This study was conducted to assess the effectiveness of two programs developed by the Frostig Center Research Department to improve the reading and spelling of students with learning disabilities (LD): a computer Speech Recognition-based Program (SRBP) and a computer and text-based Automaticity Program (AP). Twenty-eight LD students with reading and spelling difficulties (aged 8 to 18) received each program for 17 weeks and were compared with 16 students in a contrast group who did not receive either program. After adjusting for age and IQ, both the SRBP and AP groups showed significant differences over the contrast group in improving word recognition and reading comprehension. Neither program showed significant differences over contrasts in spelling. The SRBP also improved the performance of the target group when compared with the contrast group on phonological elision and nonword reading efficiency tasks. The AP showed significant differences in all process and reading efficiency measures.

Performance assessment of KORAT-3D on the ANL IBM-SP computer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexeyev, A.V.; Zvenigorodskaya, O.A.; Shagaliev, R.M.

1999-09-01

The TENAR code is currently being developed at the Russian Federal Nuclear Center (VNIIEF) as a coupled dynamics code for the simulation of transients in VVER and RBMK systems and other nuclear systems. The neutronic module in this code system is KORAT-3D. This module is also one of the most computationally intensive components of the code system. A parallel version of KORAT-3D has been implemented to achieve the goal of obtaining transient solutions in reasonable computational time, particularly for RBMK calculations that involve the application of >100,000 nodes. An evaluation of the KORAT-3D code performance was recently undertaken on themore » Argonne National Laboratory (ANL) IBM ScalablePower (SP) parallel computer located in the Mathematics and Computer Science Division of ANL. At the time of the study, the ANL IBM-SP computer had 80 processors. This study was conducted under the auspices of a technical staff exchange program sponsored by the International Nuclear Safety Center (INSC).« less

Research Institute for Advanced Computer Science: Annual Report October 1998 through September 1999

NASA Technical Reports Server (NTRS)

Leiner, Barry M.; Gross, Anthony R. (Technical Monitor)

1999-01-01

The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administration's missions. RIACS is located at the NASA Ames Research Center (ARC). It currently operates under a multiple year grant/cooperative agreement that began on October 1, 1997 and is up for renewal in the year 2002. ARC has been designated NASA's Center of Excellence in Information Technology. In this capacity, ARC is charged with the responsibility to build an Information Technology Research Program that is preeminent within NASA. RIACS serves as a bridge between NASA ARC and the academic community, and RIACS scientists and visitors work in close collaboration with NASA scientists. RIACS has the additional goal of broadening the base of researchers in these areas of importance to the nation's space and aeronautics enterprises. RIACS research focuses on the three cornerstones of information technology research necessary to meet the future challenges of NASA missions: (1) Automated Reasoning for Autonomous Systems. Techniques are being developed enabling spacecraft that will be self-guiding and self-correcting to the extent that they will require little or no human intervention. Such craft will be equipped to independently solve problems as they arise, and fulfill their missions with minimum direction from Earth. (2) Human-Centered Computing. Many NASA missions require synergy between humans and computers, with sophisticated computational aids amplifying human cognitive and perceptual abilities; (3) High Performance Computing and Networking Advances in the performance of computing and networking continue to have major impact on a variety of NASA endeavors, ranging from modeling and simulation to data analysis of large datasets to collaborative engineering, planning and execution. In addition, RIACS collaborates with NASA scientists to apply information technology research to a variety of NASA application domains. RIACS also engages in other activities, such as workshops, seminars, and visiting scientist programs, designed to encourage and facilitate collaboration between the university and NASA information technology research communities.

Research Institute for Advanced Computer Science

NASA Technical Reports Server (NTRS)

Gross, Anthony R. (Technical Monitor); Leiner, Barry M.

2000-01-01

The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administration's missions. RIACS is located at the NASA Ames Research Center. It currently operates under a multiple year grant/cooperative agreement that began on October 1, 1997 and is up for renewal in the year 2002. Ames has been designated NASA's Center of Excellence in Information Technology. In this capacity, Ames is charged with the responsibility to build an Information Technology Research Program that is preeminent within NASA. RIACS serves as a bridge between NASA Ames and the academic community, and RIACS scientists and visitors work in close collaboration with NASA scientists. RIACS has the additional goal of broadening the base of researchers in these areas of importance to the nation's space and aeronautics enterprises. RIACS research focuses on the three cornerstones of information technology research necessary to meet the future challenges of NASA missions: (1) Automated Reasoning for Autonomous Systems. Techniques are being developed enabling spacecraft that will be self-guiding and self-correcting to the extent that they will require little or no human intervention. Such craft will be equipped to independently solve problems as they arise, and fulfill their missions with minimum direction from Earth; (2) Human-Centered Computing. Many NASA missions require synergy between humans and computers, with sophisticated computational aids amplifying human cognitive and perceptual abilities; (3) High Performance Computing and Networking. Advances in the performance of computing and networking continue to have major impact on a variety of NASA endeavors, ranging from modeling and simulation to data analysis of large datasets to collaborative engineering, planning and execution. In addition, RIACS collaborates with NASA scientists to apply information technology research to a variety of NASA application domains. RIACS also engages in other activities, such as workshops, seminars, and visiting scientist programs, designed to encourage and facilitate collaboration between the university and NASA information technology research communities.

NASA-OAI HPCCP K-12 Program

NASA Technical Reports Server (NTRS)

1994-01-01

The NASA-OAI High Performance Communication and Computing K- 12 School Partnership program has been completed. Cleveland School of the Arts, Empire Computech Center, Grafton Local Schools and the Bug O Nay Ge Shig School have all received network equipment and connections. Each school is working toward integrating computer and communications technology into their classroom curriculum. Cleveland School of the Arts students are creating computer software. Empire Computech Center is a magnet school for technology education at the elementary school level. Grafton Local schools is located in a rural community and is using communications technology to bring to their students some of the same benefits students from suburban and urban areas receive. The Bug O Nay Ge Shig School is located on an Indian Reservation in Cass Lake, MN. The students at this school are using the computer to help them with geological studies. A grant has been issued to the friends of the Nashville Library. Nashville is a small township in Holmes County, Ohio. A community organization has been formed to turn their library into a state of the art Media Center. Their goal is to have a place where rural students can learn about different career options and how to go about pursuing those careers. Taylor High School in Cincinnati, Ohio was added to the schools involved in the Wind Tunnel Project. A mini grant has been awarded to Taylor High School for computer equipment. The computer equipment is utilized in the school's geometry class to computationally design objects which will be tested for their aerodynamic properties in the Barberton Wind Tunnel. The students who create the models can view the test in the wind tunnel via desk top conferencing. Two teachers received stipends for helping with the Regional Summer Computer Workshop. Both teachers were brought in to teach a session within the workshop. They were selected to teach the session based on their expertise in particular software applications.

The Effects of Computerized Auditory Feedback on Electronic Article Surveillance Tag Placement in an Auto-Parts Distribution Center

ERIC Educational Resources Information Center

Goomas, David T.

2008-01-01

In this report from the field, computerized auditory feedback was used to inform order selectors and order selector auditors in a distribution center to add an electronic article surveillance (EAS) adhesive tag. This was done by programming handheld computers to emit a loud beep for high-priced items upon scanning the item's bar-coded Universal…

Using microsoft excel applications in the graduate intern program at Goddard Space Flight Center. M.S. Thesis

NASA Technical Reports Server (NTRS)

Antoine, Lisa

1992-01-01

An outline of the Project Operations Branch at Goddard Space Flight Center is presented that describes the management of the division and each subgroup's responsibility. The paper further describes the development of software tools for the Macintosh personal computer, and their impending implementation. A detailed step by step procedure is given for using these software tools.

A model study of bridge hydraulics

DOT National Transportation Integrated Search

2010-08-01

Most flood studies in the United States use the Army Corps of Engineers HEC-RAS (Hydrologic Engineering : Centers River Analysis System) computer program. This study was carried out to compare results of HEC-RAS : bridge modeling with laboratory e...

Modeling Potential Carbon Monoxide Exposure Due to Operation of a Major Rocket Engine Altitude Test Facility Using Computational Fluid Dynamics

NASA Technical Reports Server (NTRS)

Blotzer, Michael J.; Woods, Jody L.

2009-01-01

This viewgraph presentation reviews computational fluid dynamics as a tool for modelling the dispersion of carbon monoxide at the Stennis Space Center's A3 Test Stand. The contents include: 1) Constellation Program; 2) Constellation Launch Vehicles; 3) J2X Engine; 4) A-3 Test Stand; 5) Chemical Steam Generators; 6) Emission Estimates; 7) Located in Existing Test Complex; 8) Computational Fluid Dynamics; 9) Computational Tools; 10) CO Modeling; 11) CO Model results; and 12) Next steps.

Multiple-body simulation with emphasis on integrated Space Shuttle vehicle

NASA Technical Reports Server (NTRS)

Chiu, Ing-Tsau

1993-01-01

The program to obtain intergrid communications - Pegasus - was enhanced to make better use of computing resources. Periodic block tridiagonal and penta-diagonal diagonal routines in OVERFLOW were modified to use a better algorithm to speed up the calculation for grids with periodic boundary conditions. Several programs were added to collar grid tools and a user friendly shell script was developed to help users generate collar grids. User interface for HYPGEN was modified to cope with the changes in HYPGEN. ET/SRB attach hardware grids were added to the computational model for the space shuttle and is currently incorporated into the refined shuttle model jointly developed at Johnson Space Center and Ames Research Center. Flow simulation for the integrated space shuttle vehicle at flight Reynolds number was carried out and compared with flight data as well as the earlier simulation for wind tunnel Reynolds number.

Performance optimization of helicopter rotor blades

NASA Technical Reports Server (NTRS)

Walsh, Joanne L.

1991-01-01

As part of a center-wide activity at NASA Langley Research Center to develop multidisciplinary design procedures by accounting for discipline interactions, a performance design optimization procedure is developed. The procedure optimizes the aerodynamic performance of rotor blades by selecting the point of taper initiation, root chord, taper ratio, and maximum twist which minimize hover horsepower while not degrading forward flight performance. The procedure uses HOVT (a strip theory momentum analysis) to compute the horse power required for hover and the comprehensive helicopter analysis program CAMRAD to compute the horsepower required for forward flight and maneuver. The optimization algorithm consists of the general purpose optimization program CONMIN and approximate analyses. Sensitivity analyses consisting of derivatives of the objective function and constraints are carried out by forward finite differences. The procedure is applied to a test problem which is an analytical model of a wind tunnel model of a utility rotor blade.

Embedded Data Processor and Portable Computer Technology testbeds

NASA Technical Reports Server (NTRS)

Alena, Richard; Liu, Yuan-Kwei; Goforth, Andre; Fernquist, Alan R.

1993-01-01

Attention is given to current activities in the Embedded Data Processor and Portable Computer Technology testbed configurations that are part of the Advanced Data Systems Architectures Testbed at the Information Sciences Division at NASA Ames Research Center. The Embedded Data Processor Testbed evaluates advanced microprocessors for potential use in mission and payload applications within the Space Station Freedom Program. The Portable Computer Technology (PCT) Testbed integrates and demonstrates advanced portable computing devices and data system architectures. The PCT Testbed uses both commercial and custom-developed devices to demonstrate the feasibility of functional expansion and networking for portable computers in flight missions.

Automating Veterans Administration libraries: II. Implementation at the Kansas City Medical Center Library.

PubMed Central

Smith, V K; Ting, S C

1987-01-01

In 1985, the Kansas City Veterans Administration Medical Center began implementation of the Decentralized Hospital Computer Program (DHCP). An integrated library system, a subset of that program, was started by the medical library for acquisitions and an outline catalog. To test the system, staff of the Neurology Service were trained to use the outline catalog and electronic mail to request interlibrary loans and literature searches. In implementing the project with the Neurology Service, the library is paving the way for many types of electronic access and interaction with the library. PMID:3594023

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of April 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Five articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: GAP 1.0 - Groove Analysis Program, Version 1.0; SUBTRANS - Subband/Transform MATLAB Functions for Image Processing; CSDM - COLD-SAT Dynamic Model; CASRE - Computer Aided Software Reliability Estimation; and XOPPS - OEL Project Planner/Scheduler Tool. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and disseminations are also described along with a budget summary.

NAS technical summaries. Numerical aerodynamic simulation program, March 1992 - February 1993

NASA Technical Reports Server (NTRS)

1994-01-01

NASA created the Numerical Aerodynamic Simulation (NAS) Program in 1987 to focus resources on solving critical problems in aeroscience and related disciplines by utilizing the power of the most advanced supercomputers available. The NAS Program provides scientists with the necessary computing power to solve today's most demanding computational fluid dynamics problems and serves as a pathfinder in integrating leading-edge supercomputing technologies, thus benefitting other supercomputer centers in government and industry. The 1992-93 operational year concluded with 399 high-speed processor projects and 91 parallel projects representing NASA, the Department of Defense, other government agencies, private industry, and universities. This document provides a glimpse at some of the significant scientific results for the year.

CESDIS

NASA Technical Reports Server (NTRS)

1994-01-01

CESDIS, the Center of Excellence in Space Data and Information Sciences was developed jointly by NASA, Universities Space Research Association (USRA), and the University of Maryland in 1988 to focus on the design of advanced computing techniques and data systems to support NASA Earth and space science research programs. CESDIS is operated by USRA under contract to NASA. The Director, Associate Director, Staff Scientists, and administrative staff are located on-site at NASA's Goddard Space Flight Center in Greenbelt, Maryland. The primary CESDIS mission is to increase the connection between computer science and engineering research programs at colleges and universities and NASA groups working with computer applications in Earth and space science. Research areas of primary interest at CESDIS include: 1) High performance computing, especially software design and performance evaluation for massively parallel machines; 2) Parallel input/output and data storage systems for high performance parallel computers; 3) Data base and intelligent data management systems for parallel computers; 4) Image processing; 5) Digital libraries; and 6) Data compression. CESDIS funds multiyear projects at U. S. universities and colleges. Proposals are accepted in response to calls for proposals and are selected on the basis of peer reviews. Funds are provided to support faculty and graduate students working at their home institutions. Project personnel visit Goddard during academic recess periods to attend workshops, present seminars, and collaborate with NASA scientists on research projects. Additionally, CESDIS takes on specific research tasks of shorter duration for computer science research requested by NASA Goddard scientists.

The software analysis project for the Office of Human Resources

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1994-01-01

There were two major sections of the project for the Office of Human Resources (OHR). The first section was to conduct a planning study to analyze software use with the goal of recommending software purchases and determining whether the need exists for a file server. The second section was analysis and distribution planning for retirement planning computer program entitled VISION provided by NASA Headquarters. The software planning study was developed to help OHR analyze the current administrative desktop computing environment and make decisions regarding software acquisition and implementation. There were three major areas addressed by the study: current environment new software requirements, and strategies regarding the implementation of a server in the Office. To gather data on current environment, employees were surveyed and an inventory of computers were produced. The surveys were compiled and analyzed by the ASEE fellow with interpretation help by OHR staff. New software requirements represented a compilation and analysis of the surveyed requests of OHR personnel. Finally, the information on the use of a server represents research done by the ASEE fellow and analysis of survey data to determine software requirements for a server. This included selection of a methodology to estimate the number of copies of each software program required given current use and estimated growth. The report presents the results of the computing survey, a description of the current computing environment, recommenations for changes in the computing environment, current software needs, management advantages of using a server, and management considerations in the implementation of a server. In addition, detailed specifications were presented for the hardware and software recommendations to offer a complete picture to OHR management. The retirement planning computer program available to NASA employees will aid in long-range retirement planning. The intended audience is the NASA civil service employee with several years until retirement. The employee enters current salary and savings information as well as goals concerning salary at retirement, assumptions on inflation, and the return on investments. The program produces a picture of the employee's retirement income from all sources based on the assumptions entered. A session showing features of the program was conducted for key personnel at the Center. After analysis, it was decided to offer the program through the Learning Center starting in August 1994.

New frontiers in design synthesis

NASA Technical Reports Server (NTRS)

Goldin, D. S.; Venneri, S. L.; Noor, A. K.

1999-01-01

The Intelligent Synthesis Environment (ISE), which is one of the major strategic technologies under development at NASA centers and the University of Virginia, is described. One of the major objectives of ISE is to significantly enhance the rapid creation of innovative affordable products and missions. ISE uses a synergistic combination of leading-edge technologies, including high performance computing, high capacity communications and networking, human-centered computing, knowledge-based engineering, computational intelligence, virtual product development, and product information management. The environment will link scientists, design teams, manufacturers, suppliers, and consultants who participate in the mission synthesis as well as in the creation and operation of the aerospace system. It will radically advance the process by which complex science missions are synthesized, and high-tech engineering Systems are designed, manufactured and operated. The five major components critical to ISE are human-centered computing, infrastructure for distributed collaboration, rapid synthesis and simulation tools, life cycle integration and validation, and cultural change in both the engineering and science creative process. The five components and their subelements are described. Related U.S. government programs are outlined and the future impact of ISE on engineering research and education is discussed.

DMA Modern Programming Environment Study.

DTIC Science & Technology

1980-01-01

capabilities. The centers are becoming increasingly dependent upon the computer and digital data in the fulfillment of MC&G goals. Successful application...ftticrcsrccessors C140 by Herbert AlteroDigital Citmmuncaticns C141 0 Structuredl Design ’-:orkshocr by Ned Chapin KC 156o Digital Systems En17lrceriirg CC 139 o3...on a programming environment. The study, which resulted in production of a paper entitled An EXEC 8 Programming Support Libary , contends that most of

USRA/RIACS

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1992-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on 6 June 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under a cooperative agreement with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: Parallel Computing; Advanced Methods for Scientific Computing; Learning Systems; High Performance Networks and Technology; Graphics, Visualization, and Virtual Environments.

SSRL Emergency Response Shore Tool

NASA Technical Reports Server (NTRS)

Mah, Robert W.; Papasin, Richard; McIntosh, Dawn M.; Denham, Douglas; Jorgensen, Charles; Betts, Bradley J.; Del Mundo, Rommel

2006-01-01

The SSRL Emergency Response Shore Tool (wherein SSRL signifies Smart Systems Research Laboratory ) is a computer program within a system of communication and mobile-computing software and hardware being developed to increase the situational awareness of first responders at building collapses. This program is intended for use mainly in planning and constructing shores to stabilize partially collapsed structures. The program consists of client and server components, runs in the Windows operating system on commercial off-the-shelf portable computers, and can utilize such additional hardware as digital cameras and Global Positioning System devices. A first responder can enter directly, into a portable computer running this program, the dimensions of a required shore. The shore dimensions, plus an optional digital photograph of the shore site, can then be uploaded via a wireless network to a server. Once on the server, the shore report is time-stamped and made available on similarly equipped portable computers carried by other first responders, including shore wood cutters and an incident commander. The staff in a command center can use the shore reports and photographs to monitor progress and to consult with structural engineers to assess whether a building is in imminent danger of further collapse.

A computer program for calculating the perfect gas inviscid flow field about blunt axisymmetric bodies at an angle of attack of 0 deg

NASA Technical Reports Server (NTRS)

Zoby, E. V.; Graves, R. A., Jr.

1973-01-01

A method for the rapid calculation of the inviscid shock layer about blunt axisymmetric bodies at an angle of attack of 0 deg has been developed. The procedure is of an inverse nature, that is, a shock wave is assumed and calculations proceed along rays normal to the shock. The solution is iterated until the given body is computed. The flow field solution procedure is programed at the Langley Research Center for the Control Data 6600 computer. The geometries specified in the program are sphores, ellipsoids, paraboloids, and hyperboloids which may conical afterbodies. The normal momentum equation is replaced with an approximate algebraic expression. This simplification significantly reduces machine computation time. Comparisons of the present results with shock shapes and surface pressure distributions obtained by the more exact methods indicate that the program provides reasonably accurate results for smooth bodies in axisymmetric flow. However, further research is required to establish the proper approximate form of the normal momentum equation for the two-dimensional case.

Learner Centered Experiences with Flipped Classroom and Mobile Online Webinars in Distance Higher Education Program

ERIC Educational Resources Information Center

Amhag, Lisbeth

2015-01-01

The aim of this study is to describe and analyse students' learning activities in distance higher education program with online webinars (WEB-based semINAR) by computer, laptop or mobile app for phones and tablets directly face-to-face (F2F) with other students and teachers introduced by "flipped classroom." The data collection consists…

Artificial Intelligence: An Analysis of the Technology for Training. Training and Development Research Center Project Number Fourteen.

ERIC Educational Resources Information Center

Sayre, Scott Alan

The ultimate goal of the science of artificial intelligence (AI) is to establish programs that will use algorithmic computer techniques to imitate the heuristic thought processes of humans. Most AI programs, especially expert systems, organize their knowledge into three specific areas: data storage, a rule set, and a control structure. Limitations…

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of January 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Marketing and customer service activities in this period are presented as is the progress report of NASTRAN maintenance and support. Tables of disseminations and budget summary conclude the report.

Milestone report TCTP application to the SSME hydrogen system analysis

NASA Technical Reports Server (NTRS)

Richards, J. S.

1975-01-01

The Transient Cryogen Transfer Computer Program (TCTP) developed and verified for LOX systems by analyses of Skylab S-1B stage loading data from John F. Kennedy Space Center launches was extended to include hydrogen as the working fluid. The feasibility of incorporating TCTP into the space shuttle main engine dynamic model was studied. The program applications are documented.

Healthy and Safe School Environment, Part I: Results from the School Health Policies and Programs Study 2006

ERIC Educational Resources Information Center

Jones, Sherry Everett; Fisher, Carolyn J.; Greene, Brenda Z.; Hertz, Marci F.; Pritzl, Jane

2007-01-01

Background: Policies set at the state, district, and school levels can support and enhance a healthy and safe school environment. Methods: The Centers for Disease Control and Prevention conducts the School Health Policies and Programs Study every 6 years. In 2006, computer-assisted telephone interviews or self-administered mail questionnaires were…

Sunspot: A program to model the behavior of hypervelocity impact damaged multilayer insulation in the Sunspot thermal vacuum chamber of Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Rule, W. K.; Hayashida, K. B.

1992-01-01

The development of a computer program to predict the degradation of the insulating capabilities of the multilayer insulation (MLI) blanket of Space Station Freedom due to a hypervelocity impact with a space debris particle is described. A finite difference scheme is used for the calculations. The computer program was written in Microsoft BASIC. Also described is a test program that was undertaken to validate the numerical model. Twelve MLI specimens were impacted at hypervelocities with simulated debris particles using a light gas gun at Marshall Space Flight Center. The impact-damaged MLI specimens were then tested for insulating capability in the space environment of the Sunspot thermal vacuum chamber at MSFC. Two undamaged MLI specimens were also tested for comparison with the test results of the damaged specimens. The numerical model was found to adequately predict behavior of the MLI specimens in the Sunspot chamber. A parameter, called diameter ratio, was developed to relate the nominal MLI impact damage to the apparent (for thermal analysis purposes) impact damage based on the hypervelocity impact conditions of a specimen.

Network and computing infrastructure for scientific applications in Georgia

NASA Astrophysics Data System (ADS)

Kvatadze, R.; Modebadze, Z.

2016-09-01

Status of network and computing infrastructure and available services for research and education community of Georgia are presented. Research and Educational Networking Association - GRENA provides the following network services: Internet connectivity, network services, cyber security, technical support, etc. Computing resources used by the research teams are located at GRENA and at major state universities. GE-01-GRENA site is included in European Grid infrastructure. Paper also contains information about programs of Learning Center and research and development projects in which GRENA is participating.

Symposium on the Interface: Computing Science and Statistics (20th). Theme: Computationally Intensive Methods in Statistics Held in Reston, Virginia on April 20-23, 1988

DTIC Science & Technology

1988-08-20

34 William A. Link, Patuxent Wildlife Research Center "Increasing reliability of multiversion fault-tolerant software design by modulation," Junryo 3... Multiversion lault-Tolerant Software Design by Modularization Junryo Miyashita Department of Computer Science California state University at san Bernardino Fault...They shall beE refered to as " multiversion fault-tolerant software design". Onel problem of developing multi-versions of a program is the high cost

IMAT (Integrated Multidisciplinary Analysis Tool) user's guide for the VAX/VMS computer

NASA Technical Reports Server (NTRS)

Meissner, Frances T. (Editor)

1988-01-01

The Integrated Multidisciplinary Analysis Tool (IMAT) is a computer software system for the VAX/VMS computer developed at the Langley Research Center. IMAT provides researchers and analysts with an efficient capability to analyze satellite control systems influenced by structural dynamics. Using a menu-driven executive system, IMAT leads the user through the program options. IMAT links a relational database manager to commercial and in-house structural and controls analysis codes. This paper describes the IMAT software system and how to use it.

NASA Computational Fluid Dynamics Conference. Volume 1: Sessions 1-6

NASA Technical Reports Server (NTRS)

1989-01-01

Presentations given at the NASA Computational Fluid Dynamics (CFD) Conference held at the NASA Ames Research Center, Moffett Field, California, March 7-9, 1989 are given. Topics covered include research facility overviews of CFD research and applications, validation programs, direct simulation of compressible turbulence, turbulence modeling, advances in Runge-Kutta schemes for solving 3-D Navier-Stokes equations, grid generation and invicid flow computation around aircraft geometries, numerical simulation of rotorcraft, and viscous drag prediction for rotor blades.

Vehicle Design Evaluation Program (VDEP). A computer program for weight sizing, economic, performance and mission analysis of fuel-conservative aircraft, multibodied aircraft and large cargo aircraft using both JP and alternative fuels

NASA Technical Reports Server (NTRS)

Oman, B. H.

1977-01-01

The NASA Langley Research Center vehicle design evaluation program (VDEP-2) was expanded by (1) incorporating into the program a capability to conduct preliminary design studies on subsonic commercial transport type aircraft using both JP and such alternate fuels as hydrogen and methane;(2) incorporating an aircraft detailed mission and performance analysis capability; and (3) developing and incorporating an external loads analysis capability. The resulting computer program (VDEP-3) provides a preliminary design tool that enables the user to perform integrated sizing, structural analysis, and cost studies on subsonic commercial transport aircraft. Both versions of the VDEP-3 Program which are designated preliminary Analysis VDEP-3 and detailed Analysis VDEP utilize the same vehicle sizing subprogram which includes a detailed mission analysis capability, as well as a geometry and weight analysis for multibodied configurations.

EngineSim: Turbojet Engine Simulator Adapted for High School Classroom Use

NASA Technical Reports Server (NTRS)

Petersen, Ruth A.

2001-01-01

EngineSim is an interactive educational computer program that allows users to explore the effect of engine operation on total aircraft performance. The software is supported by a basic propulsion web site called the Beginner's Guide to Propulsion, which includes educator-created, web-based activities for the classroom use of EngineSim. In addition, educators can schedule videoconferencing workshops in which EngineSim's creator demonstrates the software and discusses its use in the educational setting. This software is a product of NASA Glenn Research Center's Learning Technologies Project, an educational outreach initiative within the High Performance Computing and Communications Program.

Program to Produce Tabulated Data Set Describing NSWC Burn Model for Hydrodynamic Computations

DTIC Science & Technology

1990-09-11

helpful insights of Dr. Raafat Guirguis of the Naval Surface Warfare Center on how the NSWC Burn Model works, and Drs. Schittke and Feisler of...R. Guirguis ) 1 R13 (P. Miller ) 1 R13 (K. Kin) 2 R13 (C. Coffey) 1 R13 (H. Sandusky) 1 R13 (D. Tasker) 1 R13 (E. Lanar) 1 R13 (J. Forbes) 1 R13 (R...NAVSWC TR 90-364 AD-A238 710 PROGRAM TO PRODUCE TABULATED DATA SET DESCRIBING NSWC BURN MODEL FOR HYDRODYNAMIC COMPUTATIONS BY LEWIS C. HUDSON III

Wood Products Analysis

NASA Technical Reports Server (NTRS)

1990-01-01

Structural Reliability Consultants' computer program creates graphic plots showing the statistical parameters of glue laminated timbers, or 'glulam.' The company president, Dr. Joseph Murphy, read in NASA Tech Briefs about work related to analysis of Space Shuttle surface tile strength performed for Johnson Space Center by Rockwell International Corporation. Analysis led to a theory of 'consistent tolerance bounds' for statistical distributions, applicable in industrial testing where statistical analysis can influence product development and use. Dr. Murphy then obtained the Tech Support Package that covers the subject in greater detail. The TSP became the basis for Dr. Murphy's computer program PC-DATA, which he is marketing commercially.

Exploiting the Potential of Data Centers in the Smart Grid

NASA Astrophysics Data System (ADS)

Wang, Xiaoying; Zhang, Yu-An; Liu, Xiaojing; Cao, Tengfei

As the number of cloud computing data centers grows rapidly in recent years, from the perspective of smart grid, they are really large and noticeable electric load. In this paper, we focus on the important role and the potential of data centers as controllable loads in the smart grid. We reviewed relevant research in the area of letting data centers participate in the ancillary services market and demand response programs of the grid, and further investigate the possibility of exploiting the impact of data center placement on the grid. Various opportunities and challenges are summarized, which could provide more chances for researches to explore this field.

Design of a robotic vehicle with self-contained intelligent wheels

NASA Astrophysics Data System (ADS)

Poulson, Eric A.; Jacob, John S.; Gunderson, Robert W.; Abbott, Ben A.

1998-08-01

The Center for Intelligent Systems has developed a small robotic vehicle named the Advanced Rover Chassis 3 (ARC 3) with six identical intelligent wheel units attached to a payload via a passive linkage suspension system. All wheels are steerable, so the ARC 3 can move in any direction while rotating at any rate allowed by the terrain and motors. Each intelligent wheel unit contains a drive motor, steering motor, batteries, and computer. All wheel units are identical, so manufacturing, programing, and spare replacement are greatly simplified. The intelligent wheel concept would allow the number and placement of wheels on the vehicle to be changed with no changes to the control system, except to list the position of all the wheels relative to the vehicle center. The task of controlling the ARC 3 is distributed between one master computer and the wheel computers. Tasks such as controlling the steering motors and calculating the speed of each wheel relative to the vehicle speed in a corner are dependent on the location of a wheel relative to the vehicle center and ar processed by the wheel computers. Conflicts between the wheels are eliminated by computing the vehicle velocity control in the master computer. Various approaches to this distributed control problem, and various low level control methods, have been explored.

Template Interfaces for Agile Parallel Data-Intensive Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramakrishnan, Lavanya; Gunter, Daniel; Pastorello, Gilerto Z.

Tigres provides a programming library to compose and execute large-scale data-intensive scientific workflows from desktops to supercomputers. DOE User Facilities and large science collaborations are increasingly generating large enough data sets that it is no longer practical to download them to a desktop to operate on them. They are instead stored at centralized compute and storage resources such as high performance computing (HPC) centers. Analysis of this data requires an ability to run on these facilities, but with current technologies, scaling an analysis to an HPC center and to a large data set is difficult even for experts. Tigres ismore » addressing the challenge of enabling collaborative analysis of DOE Science data through a new concept of reusable "templates" that enable scientists to easily compose, run and manage collaborative computational tasks. These templates define common computation patterns used in analyzing a data set.« less

LTSS compendium: an introduction to the CDC 7600 and the Livermore Timesharing System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fong, K. W.

1977-08-15

This report is an introduction to the CDC 7600 computer and to the Livermore Timesharing System (LTSS) used by the National Magnetic Fusion Energy Computer Center (NMFECC) and the Lawrence Livermore Laboratory Computer Center (LLLCC or Octopus network) on their 7600's. This report is based on a document originally written specifically about the system as it is implemented at NMFECC but has been broadened to point out differences in implementation at LLLCC. It also contains information about LLLCC not relevant to NMFECC. This report is written for computational physicists who want to prepare large production codes to run under LTSSmore » on the 7600's. The generalized discussion of the operating system focuses on creating and executing controllees. This document and its companion, UCID-17557, CDC 7600 LTSS Programming Stratagems, provide a basis for understanding more specialized documents about individual parts of the system.« less

RIACS

NASA Technical Reports Server (NTRS)

Moore, Robert C.

1998-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. Research is carried out by a staff of full-time scientist,augmented by visitors, students, post doctoral candidates and visiting university faculty. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: Automated Reasoning. Human-Centered Computing. and High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling.

A model study of bridge hydraulics : technical summary.

DOT National Transportation Integrated Search

2010-08-01

Most flood studies in the United States use the Army Corps of Engineers Hydrologic Engineering Centers River Analysis System (HEC-RAS) computer program. This report is the second edition. The first edition of the report considered the laboratory m...

Improving the Human Hazard Characterization of Chemicals: A Tox21 Update

EPA Science Inventory

Background: In 2008, the National Institute of Environmental Health Sciences/National Toxicology Program, the U.S. Environmental Protection Agency’s National Center for Computational Toxicology, and the National Human Genome Research Institute/National Institutes of Health ...

77 FR 59933 - Center for Scientific Review; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

...; Biomedical Computing and Health Informatics Study Section. Date: October 11, 2012. Time: 12:00 p.m. to 4:00 p... funding cycle. (Catalogue of Federal Domestic Assistance Program Nos. 93.306, Comparative Medicine; 93.333...

Teaching Prevention in Pediatrics.

ERIC Educational Resources Information Center

Cheng, Tina L.; Greenberg, Larrie; Loeser, Helen; Keller, David

2000-01-01

Reviews methods of teaching preventive medicine in pediatrics and highlights innovative programs. Methods of teaching prevention in pediatrics include patient interactions, self-directed learning, case-based learning, small-group learning, standardized patients, computer-assisted instruction, the Internet, student-centered learning, and lectures.…

NPLOT: an Interactive Plotting Program for NASTRAN Finite Element Models

NASA Technical Reports Server (NTRS)

Jones, G. K.; Mcentire, K. J.

1985-01-01

The NPLOT (NASTRAN Plot) is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models. Developed at NASA's Goddard Space Flight Center, the program provides flexible element selection and grid point, ASET and SPC degree of freedom labelling. It is easy to use and provides a combination menu and command driven user interface. NPLOT also provides very fast hidden line and haloed line algorithms. The hidden line algorithm in NPLOT proved to be both very accurate and several times faster than other existing hidden line algorithms. A fast spatial bucket sort and horizon edge computation are used to achieve this high level of performance. The hidden line and the haloed line algorithms are the primary features that make NPLOT different from other plotting programs.

ACToR-Aggregated Computational Resource | Science ...

EPA Pesticide Factsheets

ACToR (Aggregated Computational Toxicology Resource) is a database and set of software applications that bring into one central location many types and sources of data on environmental chemicals. Currently, the ACToR chemical database contains information on chemical structure, in vitro bioassays and in vivo toxicology assays derived from more than 150 sources including the U.S. Environmental Protection Agency (EPA), Centers for Disease Control (CDC), U.S. Food & Drug Administration (FDA), National Institutes of Health (NIH), state agencies, corresponding government agencies in Canada, Europe and Japan, universities, the World Health Organization (WHO) and non-governmental organizations (NGOs). At the EPA National Center for Computational Toxicology, ACToR helps manage large data sets being used in a high throughput environmental chemical screening and prioritization program called ToxCast(TM).

Functional and performance requirements of the next NOAA-Kasas City computer system

NASA Technical Reports Server (NTRS)

Mosher, F. R.

1985-01-01

The development of the Advanced Weather Interactive Processing System for the 1990's (AWIPS-90) will result in more timely and accurate forecasts with improved cost effectiveness. As part of the AWIPS-90 initiative, the National Meteorological Center (NMC), the National Severe Storms Forecast Center (NSSFC), and the National Hurricane Center (NHC) are to receive upgrades of interactive processing systems. This National Center Upgrade program will support the specialized inter-center communications, data acquisition, and processing needs of these centers. The missions, current capabilities and general functional requirements for the upgrade to the NSSFC are addressed. System capabilities are discussed along with the requirements for the upgraded system.

2009 ALCF annual report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckman, P.; Martin, D.; Drugan, C.

2010-11-23

This year the Argonne Leadership Computing Facility (ALCF) delivered nearly 900 million core hours of science. The research conducted at their leadership class facility touched our lives in both minute and massive ways - whether it was studying the catalytic properties of gold nanoparticles, predicting protein structures, or unearthing the secrets of exploding stars. The authors remained true to their vision to act as the forefront computational center in extending science frontiers by solving pressing problems for our nation. Our success in this endeavor was due mainly to the Department of Energy's (DOE) INCITE (Innovative and Novel Computational Impact onmore » Theory and Experiment) program. The program awards significant amounts of computing time to computationally intensive, unclassified research projects that can make high-impact scientific advances. This year, DOE allocated 400 million hours of time to 28 research projects at the ALCF. Scientists from around the world conducted the research, representing such esteemed institutions as the Princeton Plasma Physics Laboratory, National Institute of Standards and Technology, and European Center for Research and Advanced Training in Scientific Computation. Argonne also provided Director's Discretionary allocations for research challenges, addressing such issues as reducing aerodynamic noise, critical for next-generation 'green' energy systems. Intrepid - the ALCF's 557-teraflops IBM Blue/Gene P supercomputer - enabled astounding scientific solutions and discoveries. Intrepid went into full production five months ahead of schedule. As a result, the ALCF nearly doubled the days of production computing available to the DOE Office of Science, INCITE awardees, and Argonne projects. One of the fastest supercomputers in the world for open science, the energy-efficient system uses about one-third as much electricity as a machine of comparable size built with more conventional parts. In October 2009, President Barack Obama recognized the excellence of the entire Blue Gene series by awarding it to the National Medal of Technology and Innovation. Other noteworthy achievements included the ALCF's collaboration with the National Energy Research Scientific Computing Center (NERSC) to examine cloud computing as a potential new computing paradigm for scientists. Named Magellan, the DOE-funded initiative will explore which science application programming models work well within the cloud, as well as evaluate the challenges that come with this new paradigm. The ALCF obtained approval for its next-generation machine, a 10-petaflops system to be delivered in 2012. This system will allow us to resolve ever more pressing problems, even more expeditiously through breakthrough science in the years to come.« less

Computational toxicology as implemented by the U.S. EPA: providing high throughput decision support tools for screening and assessing chemical exposure, hazard and risk.

PubMed

Kavlock, Robert; Dix, David

2010-02-01

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environmental Protection Agency EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in air, water, and hazardous-waste sites. The Office of Research and Development (ORD) Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the U.S. EPA Science to Achieve Results (STAR) program. Together these elements form the key components in the implementation of both the initial strategy, A Framework for a Computational Toxicology Research Program (U.S. EPA, 2003), and the newly released The U.S. Environmental Protection Agency's Strategic Plan for Evaluating the Toxicity of Chemicals (U.S. EPA, 2009a). Key intramural projects of the CTRP include digitizing legacy toxicity testing information toxicity reference database (ToxRefDB), predicting toxicity (ToxCast) and exposure (ExpoCast), and creating virtual liver (v-Liver) and virtual embryo (v-Embryo) systems models. U.S. EPA-funded STAR centers are also providing bioinformatics, computational toxicology data and models, and developmental toxicity data and models. The models and underlying data are being made publicly available through the Aggregated Computational Toxicology Resource (ACToR), the Distributed Structure-Searchable Toxicity (DSSTox) Database Network, and other U.S. EPA websites. While initially focused on improving the hazard identification process, the CTRP is placing increasing emphasis on using high-throughput bioactivity profiling data in systems modeling to support quantitative risk assessments, and in developing complementary higher throughput exposure models. This integrated approach will enable analysis of life-stage susceptibility, and understanding of the exposures, pathways, and key events by which chemicals exert their toxicity in developing systems (e.g., endocrine-related pathways). The CTRP will be a critical component in next-generation risk assessments utilizing quantitative high-throughput data and providing a much higher capacity for assessing chemical toxicity than is currently available.

Development of Flight Safety Prediction Methodology for U. S. Naval Safety Center. Revision 1

DTIC Science & Technology

1970-02-01

Safety Center. The methodology develoned encompassed functional analysis of the F-4J aircraft, assessment of the importance of safety- sensitive ... Sensitivity ... ....... . 4-8 V 4.5 Model Implementation ........ ......... . 4-10 4.5.1 Functional Analysis ..... ........... . 4-11 4. 5. 2 Major...Function Sensitivity Assignment ........ ... 4-13 i 4.5.3 Link Dependency Assignment ... ......... . 4-14 4.5.4 Computer Program for Sensitivity

Childcare Service Centers’ Preferences and Intentions to Use a Web-Based Program to Implement Healthy Eating and Physical Activity Policies and Practices: A Cross-Sectional Study

PubMed Central

Williams, Christopher Michael; Finch, Meghan; Wyse, Rebecca; Jones, Jannah; Freund, Megan; Wiggers, John Henry; Nathan, Nicole; Dodds, Pennie; Wolfenden, Luke

2015-01-01

Background Overweight and obesity is a significant public health problem that impacts a large number of children globally. Supporting childcare centers to deliver healthy eating and physical activity-promoting policies and practices is a recommended strategy for obesity prevention, given that such services provide access to a substantial proportion of children during a key developmental period. Electronic Web-based interventions represent a novel way to support childcare service providers to implement such policies and practices. Objective This study aimed to assess: (1) childcare centers’ current use of technology, (2) factors associated with intention to use electronic Web-based interventions, and (3) Web-based features that managers rated as useful to support staff with implementing healthy eating and physical activity-promoting policies and practices. Methods A computer-assisted telephone interview (CATI) was conducted with service managers from long day care centers and preschools. The CATI assessed the following: (1) childcare center characteristics, (2) childcare centers’ use of electronic devices, (3) intention to use a hypothetical electronic Web-based program—assessed using the Technology Acceptance Model (TAM) with ratings between 1 (strongly disagree) and 7 (strongly agree), and (4) features rated as useful to include in a Web-based program. Results Overall, 214 service centers out of 277 (77.3%) consented to participate. All service centers except 2 reported using computers (212/214, 99.1%), whereas 40.2% (86/214) used portable tablets. A total of 71.9% (151/210) of childcare service managers reported a score of 6 or more for intention to use a hypothetical electronic Web-based program. In a multivariable logistic regression analysis, intention to use the program was significantly associated with perceived ease of use (P=.002, odds ratio [OR] 3.9, 95% CI 1.6-9.2) and perceived usefulness (P<.001, OR 28,95% CI 8.0-95.2). Features reported by service managers as useful or very useful for a Web-based program included decision-support tools to support staff with menu planning (117/129, 90.7%), links to relevant resources (212/212, 100%), updated information on guidelines (208/212, 98.1%), and feedback regarding childcare center performance in relation to other childcare centers (212/212, 100%). Conclusions Childcare service managers reported high intention to use a Web-based program and identified several useful features to support staff to implement healthy eating and physical activity policies and practices. Further descriptive and intervention research examining the development and use of such a program to support childcare centers with the implementation of healthy eating and physical activity-promoting policies and practices is warranted. PMID:25931430

Long wavelength propagation capacity, version 1.1 (computer diskette)

NASA Astrophysics Data System (ADS)

1994-05-01

File Characteristics: software and data file. (72 files); ASCII character set. Physical Description: 2 computer diskettes; 3 1/2 in.; high density; 1.44 MB. System Requirements: PC compatible; Digital Equipment Corp. VMS; PKZIP (included on diskette). This report describes a revision of the Naval Command, Control and Ocean Surveillance Center RDT&E Division's Long Wavelength Propagation Capability (LWPC). The first version of this capability was a collection of separate FORTRAN programs linked together in operation by a command procedure written in an operating system unique to the Digital Equipment Corporation (Ferguson & Snyder, 1989a, b). A FORTRAN computer program named Long Wavelength Propagation Model (LWPM) was developed to replace the VMS control system (Ferguson & Snyder, 1990; Ferguson, 1990). This was designated version 1 (LWPC-1). This program implemented all the features of the original VMS plus a number of auxiliary programs that provided summaries of the files and graphical displays of the output files. This report describes a revision of the LWPC, designated version 1.1 (LWPC-1.1)

Research papers and publications (1981-1987): Workload research program

NASA Technical Reports Server (NTRS)

Hart, Sandra G. (Compiler)

1987-01-01

An annotated bibliography of the research reports written by participants in NASA's Workload Research Program since 1981 is presented, representing the results of theoretical and applied research conducted at Ames Research Center and at universities and industrial laboratories funded by the program. The major program elements included: 1) developing an understanding of the workload concept; 2) providing valid, reliable, and practical measures of workload; and 3) creating a computer model to predict workload. The goal is to provide workload-related design principles, measures, guidelines, and computational models. The research results are transferred to user groups by establishing close ties with manufacturers, civil and military operators of aerospace systems, and regulatory agencies; publishing scientific articles; participating in and sponsoring workshops and symposia; providing information, guidelines, and computer models; and contributing to the formulation of standards. In addition, the methods and theories developed have been applied to specific operational and design problems at the request of a number of industry and government agencies.

Education and Outreach Programs Offered by the Center for High Pressure Research and the Consortium for Materials Properties Research in Earth Sciences

NASA Astrophysics Data System (ADS)

Richard, G. A.

2003-12-01

Major research facilities and organizations provide an effective venue for developing partnerships with educational organizations in order to offer a wide variety of educational programs, because they constitute a base where the culture of scientific investigation can flourish. The Consortium for Materials Properties Research in Earth Sciences (COMPRES) conducts education and outreach programs through the Earth Science Educational Resource Center (ESERC), in partnership with other groups that offer research and education programs. ESERC initiated its development of education programs in 1994 under the administration of the Center for High Pressure Research (CHiPR), which was funded as a National Science Foundation Science and Technology Center from 1991 to 2002. Programs developed during ESERC's association with CHiPR and COMPRES have targeted a wide range of audiences, including pre-K, K-12 students and teachers, undergraduates, and graduate students. Since 1995, ESERC has offered inquiry-based programs to Project WISE (Women in Science and Engineering) students at a high school and undergraduate level. Activities have included projects that investigated earthquakes, high pressure mineral physics, and local geology. Through a practicum known as Project Java, undergraduate computer science students have developed interactive instructional tools for several of these activities. For K-12 teachers, a course on Long Island geology is offered each fall, which includes an examination of the role that processes in the Earth's interior have played in the geologic history of the region. ESERC has worked with Stony Brook's Department of Geosciences faculty to offer courses on natural hazards, computer modeling, and field geology to undergraduate students, and on computer programming for graduate students. Each summer, a four-week residential college-level environmental geology course is offered to rising tenth graders from the Brentwood, New York schools in partnership with Stony Brook's Department of Technology and Society. During the academic year, a college-level Earth science course is offered to tenth graders from Sayville, New York. In both programs, students conduct research projects as one of their primary responsibilities. In collaboration with the Museum of Long Island Natural Sciences on the Stony Brook campus, two programs have been developed that enable visiting K-12 school classes to investigate earthquakes and phenomena that operate in the Earth's deep interior. From 1997 to 1999, the weekly activity-based Science Enrichment for the Early Years (SEEY) program, focusing on common Earth materials and fundamental Earth processes, was conducted at a local pre-K school. Since 2002, ESERC has worked with the Digital Library for Earth System Education (DLESE) to organize the Skills Workshops for their Annual Meeting and with EarthScope for the development of their Education and Outreach Program Plan. Future education programs and tools developed through COMPRES partnerships will place an increased emphasis on deep Earth materials and phenomena.

The 1970/71 spectral data management programs

NASA Technical Reports Server (NTRS)

Marshall, A. A.

1971-01-01

The data management programs used by the Stanford Remote Sensing Laboratory to access, modify, and reduce the data obtained from both the NASA IR airborne spectrometer, and Stanford's SG-4 field spectrometer are reported. Many details covered in previous reports are not repeated. References are provided. These programs are written in FORTRAN 4 and S/360 Assembler Language, and are currently running on a S/360 model 67 (operating under OS/MFT) at the Stanford Computation Center Campus Facility.

A visiting scientist program in atmospheric sciences for the Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Davis, M. H.

1989-01-01

A visiting scientist program was conducted in the atmospheric sciences and related areas at the Goddard Laboratory for Atmospheres. Research was performed in mathematical analysis as applied to computer modeling of the atmospheres; development of atmospheric modeling programs; analysis of remotely sensed atmospheric, surface, and oceanic data and its incorporation into atmospheric models; development of advanced remote sensing instrumentation; and related research areas. The specific research efforts are detailed by tasks.

Scientific and technical information output of the Langley Research Center for Calender year 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Included are citations for formal reports, quick-release technical memorandums, contractor reports, journal articles and periodical literature, meeting/conference papers, and computer programs. Tech briefs, patents, and oral presentations to conferences/workshops are also included.

Passive Localization of Multiple Sources Using Widely-Spaced Arrays With Application to Marine Mammals

DTIC Science & Technology

2006-09-30

IEEE OES Student Poster Program Oceans ’05 Europe, Brest, France, June 20-23, 2005. Sponsored by Thales Underwater Systems. Student Engagement Award to E.-M. Nosal – Maui High Performance Computing Center (2005-2006).

Sandia National Laboratories: Advanced Simulation and Computing

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Center for modeling of turbulence and transition: Research briefs, 1993

NASA Technical Reports Server (NTRS)

Liou, William W. (Editor)

1994-01-01

This research brief contains the progress reports of the research staff of the Center for Modeling of Turbulence and Transition (CMOTT) from June 1992 to July 1993. It is also an annual report to the Institute for Computational Mechanics in Propulsion located at Ohio Aerospace Institute and NASA Lewis Research Center. The main objectives of the research activities at CMOTT are to develop, validate, and implement turbulence and transition models for flows of interest in propulsion systems. Currently, our research covers eddy viscosity one- and two-equation models, Reynolds-stress algebraic equation models, Reynolds-stress transport equation models, nonequilibrium multiple-scale models, bypass transition models, joint scalar probability density function models, and Renormalization Group Theory and Direct Interaction Approximation methods. Some numerical simulations (LES and DNS) have also been carried out to support the development of turbulence modeling. Last year was CMOTT's third year in operation. During this period, in addition to the above mentioned research, CMOTT has also hosted the following programs: an eighteen-hour short course on 'Turbulence--Fundamentals and Computational Modeling (Part I)' given by CMOTT at the NASA Lewis Research Center; a productive summer visitor research program that has generated many encouraging results; collaborative programs with industry customers to help improve their turbulent flow calculations for propulsion system designs; a biweekly CMOTT seminar series with speakers from within and without the NASA Lewis Research Center including foreign speakers. In addition, CMOTT members have been actively involved in the national and international turbulence research activities. The current CMOTT roster and organization are listed in Appendix A. Listed in Appendix B are the abstracts of the biweekly CMOTT seminar. Appendix C lists the papers contributed by CMOTT members.

Pricing the Services of the Computer Center at the Catholic University of Louvain. Program on Institutional Management in Higher Education.

ERIC Educational Resources Information Center

Hecquet, Ignace; And Others

Principles are outlined that are used as a basis for the system of pricing the services of the Computer Centre. The system illustrates the use of a management method to secure better utilization of university resources. Departments decide how to use the appropriations granted to them and establish a system of internal prices that reflect the cost…

Contention Bounds for Combinations of Computation Graphs and Network Topologies

DTIC Science & Technology

2014-08-08

member of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA, and ASPIRE Lab industrial sponsors and affiliates Intel...Google, Nokia, NVIDIA , Oracle, MathWorks and Samsung. Also funded by U.S. DOE Office of Science, Office of Advanced Scientific Computing Research...DARPA Award Number HR0011-12-2- 0016, the Center for Future Architecture Research, a mem- ber of STARnet, a Semiconductor Research Corporation

A coactive interdisciplinary research program with NASA

NASA Technical Reports Server (NTRS)

Rouse, J. W., Jr.

1972-01-01

The applications area of the Texas A&M University remote sensing program consists of a series of coactive projects with NASA/MSC personnel. In each case, the Remote Sensing Center has served to complement and enhance the research capability within the Manned Spacecraft Center. In addition to the applications study area, the Texas A&M University program includes coordinated projects in sensors and data analysis. Under the sensors area, an extensive experimental study of microwave radiometry for soil moisture determination established the effect of soil moisture on the measured brightness temperature for several different soil types. The data analysis area included a project which ERTS-A and Skylab data were simulated using aircraft multispectral scanner measurements at two altitudes. This effort resulted in development of a library of computer programs which provides an operational capability in classification analysis of multispectral data.

Stonix, Version 0.x

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-05-13

STONIX is a program for configuring UNIX and Linux computer operating systems. It applies configurations based on the guidance from publicly accessible resources such as: NSA Guides, DISA STIGs, the Center for Internet Security (CIS), USGCB and vendor security documentation. STONIX is written in the Python programming language using the QT4 and PyQT4 libraries to provide a GUI. The code is designed to be easily extensible and customizable.

The 1984 NASA/ASEE summer faculty fellowship program

NASA Technical Reports Server (NTRS)

Mcinnis, B. C.; Duke, M. B.; Crow, B.

1984-01-01

An overview is given of the program management and activities. Participants and research advisors are listed. Abstracts give describe and present results of research assignments performed by 31 fellows either at the Johnson Space Center, at the White Sands test Facility, or at the California Space Institute in La Jolla. Disciplines studied include engineering; biology/life sciences; Earth sciences; chemistry; mathematics/statistics/computer sciences; and physics/astronomy.

Jackson State University's Center for Spatial Data Research and Applications: New facilities and new paradigms

NASA Technical Reports Server (NTRS)

Davis, Bruce E.; Elliot, Gregory

1989-01-01

Jackson State University recently established the Center for Spatial Data Research and Applications, a Geographical Information System (GIS) and remote sensing laboratory. Taking advantage of new technologies and new directions in the spatial (geographic) sciences, JSU is building a Center of Excellence in Spatial Data Management. New opportunities for research, applications, and employment are emerging. GIS requires fundamental shifts and new demands in traditional computer science and geographic training. The Center is not merely another computer lab but is one setting the pace in a new applied frontier. GIS and its associated technologies are discussed. The Center's facilities are described. An ARC/INFO GIS runs on a Vax mainframe, with numerous workstations. Image processing packages include ELAS, LIPS, VICAR, and ERDAS. A host of hardware and software peripheral are used in support. Numerous projects are underway, such as the construction of a Gulf of Mexico environmental data base, development of AI in image processing, a land use dynamics study of metropolitan Jackson, and others. A new academic interdisciplinary program in Spatial Data Management is under development, combining courses in Geography and Computer Science. The broad range of JSU's GIS and remote sensing activities is addressed. The impacts on changing paradigms in the university and in the professional world conclude the discussion.

Automated support tool for variable rate irrigation prescriptions

USDA-ARS?s Scientific Manuscript database

Variable rate irrigation (VRI) enables center pivot management to better meet non-uniform water and fertility needs. This is accomplished through correctly matching system water application with spatial and temporal variability within the field. A computer program was modified to accommodate GIS dat...

Civilian Nuclear Program

Science.gov Websites

Los Alamos National Laboratory Search Site submit About Mission Business Newsroom Publications Los Innovation in New Mexico Los Alamos Collaboration for Explosives Detection (LACED) SensorNexus Exascale Computing Project (ECP) User Facilities Center for Integrated Nanotechnologies (CINT) Los Alamos Neutron

STEM Education Programs

Science.gov Websites

Los Alamos National Laboratory Search Site submit About Mission Business Newsroom Publications Los Innovation in New Mexico Los Alamos Collaboration for Explosives Detection (LACED) SensorNexus Exascale Computing Project (ECP) User Facilities Center for Integrated Nanotechnologies (CINT) Los Alamos Neutron

Applied Energy Program

Science.gov Websites

Los Alamos National Laboratory Search Site submit About Mission Business Newsroom Publications Los Innovation in New Mexico Los Alamos Collaboration for Explosives Detection (LACED) SensorNexus Exascale Computing Project (ECP) User Facilities Center for Integrated Nanotechnologies (CINT) Los Alamos Neutron

Pioneering Partnerships for Progress

ERIC Educational Resources Information Center

Borden, Sam

2006-01-01

This paper presents a brief description of the Center for Bioscience and the Integration of Computer and Telecommunications Technology (BioCATT) at Gateway Technical College in Kenosha, Wisconsin. BioCATT is designed to serve as a catalyst for innovation in educational programming, business services, and technology applications.

77 FR 59938 - Center for Scientific Review Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... Panel; Program Project: Drug Addiction. Date: October 30-31, 2012. Time: 8:00 a.m. to 8:30 p.m. Agenda... Biomedical Computational Science and Technology Initiative. Date: October 30, 2012. Time: 3:00 p.m. to 4:00 p...

Galen Maclaurin | NREL

Science.gov Websites

Scientific programming and high performance computing Research Interests Wind and solar resource assessment , Department of Geography and Environmental Sciences, Denver, CO Research Assistant, National Center for Atmospheric Research (NCAR), Boulder, CO Graduate Instructor and Research Assistant, University of Colorado

Pioneering University/Industry Venture Explores VLSI Frontiers.

ERIC Educational Resources Information Center

Davis, Dwight B.

1983-01-01

Discusses industry-sponsored programs in semiconductor research, focusing on Stanford University's Center for Integrated Systems (CIS). CIS, while pursuing research in semiconductor very-large-scale integration, is merging the fields of computer science, information science, and physical science. Issues related to these university/industry…

Greater Philadelphia Bioinformatics Alliance (GPBA) 3rd Annual Retreat 2005

DTIC Science & Technology

2005-11-01

Using Probabilistic Network Reliability. Genome Res. 14:1170-1175 [27] Batagelj , V. and Mrvar , A. (1998). Pajek: Program for large network analysis...and Neural Computation, Division of Informatics, Centre for Cognitive Science, University of Edinburgh, Scotland, April 1996 . www.anc.ed.ac.uk/-mjo...research center in the College of Engineering, and one of the foremost academic research centers in its field. From 1996 to 1998 he was the Founding

Advanced interdisciplinary undergraduate program: light engineering

NASA Astrophysics Data System (ADS)

Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

2016-09-01

The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

WOLF; automatic typing program

USGS Publications Warehouse

Evenden, G.I.

1982-01-01

A FORTRAN IV program for the Hewlett-Packard 1000 series computer provides for automatic typing operations and can, when employed with manufacturer's text editor, provide a system to greatly facilitate preparation of reports, letters and other text. The input text and imbedded control data can perform nearly all of the functions of a typist. A few of the features available are centering, titles, footnotes, indentation, page numbering (including Roman numerals), automatic paragraphing, and two forms of tab operations. This documentation contains both user and technical description of the program.

Fourth Year Status Report. Computerized Training Systems Project. Project ABACUS.

DTIC Science & Technology

1976-08-01

in 7 9. PERFORMING ORGANIZATION NAME AND ADOMEN ,,, 10. PROGRAM ELEMENT. PROJECT , TASK US Army Tra ining Support Center A R E A S WORK UNIT NUMBERS...transp ired during the fourth year of Project ABACUS, the A rmy ’s program for the development of a Computerized Training System. It inc l udes a...have transpired durlnq the fourth year of Project ABACUS, the Army ’s program for the developmen t o~ aprototype Computer i zed Training System. It

Production of rotational parts in small-series and computer-aided planning of its production engineering

NASA Astrophysics Data System (ADS)

Dudas, Illes; Berta, Miklos; Cser, Istvan

1998-12-01

Up-to-date manufacturing equipments of production of rotational parts in small series are lathe-centers and CNC grinding machines with high concentration of manufacturing operations. By the use of these machine tools it can be produced parts with requirements of increased accuracy and surface quality. In the lathe centers, which contain the manufacturing procedures of lathes using stationary tools and of drilling-milling machine tools using rotational tools, non-rotational surfaces of rotational parts can also be produced. The high concentration of manufacturing operations makes necessary the planning and programing of the measuring, monitoring and quality control into the technological process during manufacturing operation. In this way, taking into consideration the technological possibilities of lathe canters, the scope of computer aided technological planning duties significantly increases. It is trivial requirement to give only once the descriptions of the prefabricated parts and ready made parts. Starting taking into account these careful considerations we have been developing the planning system of technology of body of revolution on the base of GTIPROG/EC system which useful for programming of lathe centers. Out paper deals with the results of development and the occurring problems.

Turbine Manufacture

NASA Technical Reports Server (NTRS)

1979-01-01

The machinery pictured is a set of Turbodyne steam turbines which power a sugar mill at Bell Glade, Florida. A NASA-developed computer program called NASTRAN aided development of these and other turbines manufactured by Turbodyne Corporation's Steam Turbine Division, Wellsville, New York. An acronym for NASA Structural Analysis Program, NASTRAN is a predictive tool which advises development teams how a structural design will perform under service use conditions. Turbodyne uses NASTRAN to analyze the dynamic behavior of steam turbine components, achieving substantial savings in development costs. One of the most widely used spinoffs, NASTRAN is made available to private industry through NASA's Computer Software Management Information Center (COSMIC) at the University of Georgia.

2002 Computing and Interdisciplinary Systems Office Review and Planning Meeting

NASA Technical Reports Server (NTRS)

Lytle, John; Follen, Gregory; Lopez, Isaac; Veres, Joseph; Lavelle, Thomas; Sehra, Arun; Freeh, Josh; Hah, Chunill

2003-01-01

The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with NASA Glenn s Propulsion program, NASA Ames, industry, academia and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This year s review meeting describes the current status of the NPSS and the Object Oriented Development Kit with specific emphasis on the progress made over the past year on air breathing propulsion applications for aeronautics and space transportation applications. Major accomplishments include the first 3-D simulation of the primary flow path of a large turbofan engine in less than 15 hours, and the formal release of the NPSS Version 1.5 that includes elements of rocket engine systems and a visual based syntax layer. NPSS and the Development Kit are managed by the Computing and Interdisciplinary Systems Office (CISO) at the NASA Glenn Research Center and financially supported in fiscal year 2002 by the Computing, Networking and Information Systems (CNIS) project managed at NASA Ames, the Glenn Aerospace Propulsion and Power Program and the Advanced Space Transportation Program.

Staff Views of Acceptability and Appropriateness of a Computer-Delivered Brief Intervention for Moderate Drug and Alcohol Use.

PubMed

Mitchell, Shannon Gwin; Monico, Laura B; Gryczynski, Jan; O'Grady, Kevin E; Schwartz, Robert P

2015-01-01

The use of computers for identifying and intervening with stigmatized behaviors, such as drug use, offers promise for underserved, rural areas; however, the acceptability and appropriateness of using computerized brief intervention (CBIs) must be taken into consideration. In the present study, 12 staff members representing a range of clinic roles in two rural, federally qualified health centers completed semi-structured interviews in a qualitative investigation of CBI vs. counselor-delivered individual brief intervention (IBI). Thematic content analysis was conducted using a constant comparative method, examining the range of responses within each interview as well as data across interview respondents. Overall, staff found the idea of providing CBIs both acceptable and appropriate for their patient population. Acceptability by clinic staff centered on the ready availability of the CBI. Staff also believed that patients might be more forthcoming in response to a computer program than a personal interview. However, some staff voiced reservations concerning the appropriateness of CBIs for subsets of patients, including older patients, illiterate individuals, or those unfamiliar with computers. Findings support the potential suitability and potential benefits of providing CBIs to patients in rural health centers.

Final Technical Progress Report; Closeout Certifications; CSSV Newsletter Volume I; CSSV Newsletter Volume II; CSSV Activity Journal; CSSV Final Financial Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houston, Johnny L; Geter, Kerry

This Project?s third year of implementation in 2007-2008, the final year, as designated by Elizabeth City State University (ECSU), in cooperation with the National Association of Mathematicians (NAM) Inc., in an effort to promote research and research training programs in computational science ? scientific visualization (CSSV). A major goal of the Project was to attract the energetic and productive faculty, graduate and upper division undergraduate students of diverse ethnicities to a program that investigates science and computational science issues of long-term interest to the Department of Energy (DoE) and the nation. The breadth and depth of computational science?scientific visualization andmore » the magnitude of resources available are enormous for permitting a variety of research activities. ECSU?s Computational Science-Science Visualization Center will serve as a conduit for directing users to these enormous resources.« less

RIACS/USRA

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1993-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on 6 June 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under contract with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: Parallel Computing, Advanced Methods for Scientific Computing, High Performance Networks and Technology, and Learning Systems. Parallel compiler techniques, adaptive numerical methods for flows in complicated geometries, and optimization were identified as important problems to investigate for ARC's involvement in the Computational Grand Challenges of the next decade.

Data Processing Center of Radioastron Project: 3 years of operation.

NASA Astrophysics Data System (ADS)

Shatskaya, Marina

ASC DATA PROCESSING CENTER (DPC) of Radioastron Project is a fail-safe complex centralized system of interconnected software/ hardware components along with organizational procedures. Tasks facing of the scientific data processing center are organization of service information exchange, collection of scientific data, storage of all of scientific data, data science oriented processing. DPC takes part in the informational exchange with two tracking stations in Pushchino (Russia) and Green Bank (USA), about 30 ground telescopes, ballistic center, tracking headquarters and session scheduling center. Enormous flows of information go to Astro Space Center. For the inquiring of enormous data volumes we develop specialized network infrastructure, Internet channels and storage. The computer complex has been designed at the Astro Space Center (ASC) of Lebedev Physical Institute and includes: - 800 TB on-line storage, - 2000 TB hard drive archive, - backup system on magnetic tapes (2000 TB); - 24 TB redundant storage at Pushchino Radio Astronomy Observatory; - Web and FTP servers, - DPC management and data transmission networks. The structure and functions of ASC Data Processing Center are fully adequate to the data processing requirements of the Radioastron Mission and has been successfully confirmed during Fringe Search, Early Science Program and first year of Key Science Program.

A novel device for head gesture measurement system in combination with eye-controlled human machine interface

NASA Astrophysics Data System (ADS)

Lin, Chern-Sheng; Ho, Chien-Wa; Chang, Kai-Chieh; Hung, San-Shan; Shei, Hung-Jung; Yeh, Mau-Shiun

2006-06-01

This study describes the design and combination of an eye-controlled and a head-controlled human-machine interface system. This system is a highly effective human-machine interface, detecting head movement by changing positions and numbers of light sources on the head. When the users utilize the head-mounted display to browse a computer screen, the system will catch the images of the user's eyes with CCD cameras, which can also measure the angle and position of the light sources. In the eye-tracking system, the program in the computer will locate each center point of the pupils in the images, and record the information on moving traces and pupil diameters. In the head gesture measurement system, the user wears a double-source eyeglass frame, so the system catches images of the user's head by using a CCD camera in front of the user. The computer program will locate the center point of the head, transferring it to the screen coordinates, and then the user can control the cursor by head motions. We combine the eye-controlled and head-controlled human-machine interface system for the virtual reality applications.

Laboratory for Computer Science Progress Report 21, July 1983-June 1984.

DTIC Science & Technology

1984-06-01

Systems 269 4. Distributed Consensus 270 5. Election of a Leader in a Distributed Ring of Processors 273 6. Distributed Network Algorithms 274 7. Diagnosis...multiprocessor systems. This facility, funded by the new!y formed Strategic Computing Program of the Defense Advanced Research Projects Agency, will enable...Academic Staff P. Szo)ovits, Group Leader R. Patil Collaborating Investigators M. Criscitiello, M.D., Tufts-New England Medical Center Hospital R

Fluid-Structure Interaction Using Retarded Potential and ABAQUS

DTIC Science & Technology

1992-08-19

APPLICATION A retarded potential (RP) capability has been coupled to the ABAQUS program, through the DLOAD user written subroutine , to form ABAQUS - RP...and ABAQUS C. T. DYKA Geo-Centers, Inc. Fort Washington, MD 20744 and M. A. TAMM Computer Operations and Communications Branch Research Computation... ABAQUS 63569N 6. AUTHOR(S) 6604 C. T. Dyka* and M. A. Tamm 7. PERFORMING ORGANIZATION NAME(S) AND AOORESS(ES) b. PERFORMING ORGANIZATION REPORT NUMBER

Computer program /P1-GAS/ calculates the P-0 and P-1 transfer matrices for neutron moderation in a monatomic gas

NASA Technical Reports Server (NTRS)

Collier, G.; Gibson, G.

1968-01-01

FORTRAN 4 program /P1-GAS/ calculates the P-O and P-1 transfer matrices for neutron moderation in a monatomic gas. The equations used are based on the conditions that there is isotropic scattering in the center-of-mass coordinate system, the scattering cross section is constant, and the target nuclear velocities satisfy a Maxwellian distribution.

Cost and schedule analytical techniques development

NASA Technical Reports Server (NTRS)

1994-01-01

This contract provided technical services and products to the Marshall Space Flight Center's Engineering Cost Office (PP03) and the Program Plans and Requirements Office (PP02) for the period of 3 Aug. 1991 - 30 Nov. 1994. Accomplishments summarized cover the REDSTAR data base, NASCOM hard copy data base, NASCOM automated data base, NASCOM cost model, complexity generators, program planning, schedules, NASA computer connectivity, other analytical techniques, and special project support.

Scientific and technical information output of the Langley Research Center for calendar year 1982

NASA Technical Reports Server (NTRS)

1983-01-01

Citations are presented for 1380 for formal reports; quick-release technical memorandum; contractor reports; journal articles and periodical literature; technical talks and meeting presentations; computer programs; tech briefs, and patents produced during 1982. An author index is provided.

77 FR 3069 - Modification of Interlibrary Loan Fee Schedule

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

... collections of the National Agricultural Library (NAL). The revised fee schedule is based on the method of... through the Online Computer Library Center (OCLC) network's Interlibrary Fee Management program, a debit..., National Agricultural Library, 10301 Baltimore Avenue, Beltsville, MD 20705-2351. FOR FURTHER INFORMATION...

Internet Research, Uncensored

ERIC Educational Resources Information Center

Kean, Sam

2007-01-01

In this article, the author discusses a computer program called Psiphon which bypasses government filters undetected. The University of Toronto's Citizen Lab, a research center for digital media and politics, designed Psiphon for technology-savvy activists. Some technology-savvy activists use other open-source software, like Tor (which relies on…

User participation in the development of the human/computer interface for control centers

NASA Technical Reports Server (NTRS)

Broome, Richard; Quick-Campbell, Marlene; Creegan, James; Dutilly, Robert

1996-01-01

Technological advances coupled with the requirements to reduce operations staffing costs led to the demand for efficient, technologically-sophisticated mission operations control centers. The control center under development for the earth observing system (EOS) is considered. The users are involved in the development of a control center in order to ensure that it is cost-efficient and flexible. A number of measures were implemented in the EOS program in order to encourage user involvement in the area of human-computer interface development. The following user participation exercises carried out in relation to the system analysis and design are described: the shadow participation of the programmers during a day of operations; the flight operations personnel interviews; and the analysis of the flight operations team tasks. The user participation in the interface prototype development, the prototype evaluation, and the system implementation are reported on. The involvement of the users early in the development process enables the requirements to be better understood and the cost to be reduced.

HPCC and the National Information Infrastructure: an overview.

PubMed Central

Lindberg, D A

1995-01-01

The National Information Infrastructure (NII) or "information superhighway" is a high-priority federal initiative to combine communications networks, computers, databases, and consumer electronics to deliver information services to all U.S. citizens. The NII will be used to improve government and social services while cutting administrative costs. Operated by the private sector, the NII will rely on advanced technologies developed under the direction of the federal High Performance Computing and Communications (HPCC) Program. These include computing systems capable of performing trillions of operations (teraops) per second and networks capable of transmitting billions of bits (gigabits) per second. Among other activities, the HPCC Program supports the national supercomputer research centers, the federal portion of the Internet, and the development of interface software, such as Mosaic, that facilitates access to network information services. Health care has been identified as a critical demonstration area for HPCC technology and an important application area for the NII. As an HPCC participant, the National Library of Medicine (NLM) assists hospitals and medical centers to connect to the Internet through projects directed by the Regional Medical Libraries and through an Internet Connections Program cosponsored by the National Science Foundation. In addition to using the Internet to provide enhanced access to its own information services, NLM sponsors health-related applications of HPCC technology. Examples include the "Visible Human" project and recently awarded contracts for test-bed networks to share patient data and medical images, telemedicine projects to provide consultation and medical care to patients in rural areas, and advanced computer simulations of human anatomy for training in "virtual surgery." PMID:7703935

Evaluation of a Computerized Clinical Information System (Micromedex).

PubMed Central

Lundsgaarde, H. P.; Moreshead, G. E.

1991-01-01

This paper summarizes data collected as part of a project designed to identify and assess the technical and organizational problems associated with the implementation and evaluation of a Computerized Clinical Information System (CCIS), Micromedex, in three U.S. Department of Veterans Affairs Medical Centers (VAMCs). The study began in 1987 as a national effort to implement decision support technologies in the Veterans Administration Decentralized Hospital Computer Program (DHCP). The specific objectives of this project were to (1) examine one particular decision support technology, (2) identify the technical and organizational barriers to the implementation of a CCIS in the VA host environment, (3) assess the possible benefits of this system to VA clinicians in terms of therapeutic decision making, and (4) develop new methods for identifying the clinical utility of a computer program designed to provide clinicians with a new information tool. The project was conducted intermittently over a three-year period at three VA medical centers chosen as implementation and evaluation test sites for Micromedex. Findings from the Kansas City Medical Center in Missouri are presented to illustrate some of the technical problems associated with the implementation of a commercial database program in the DHCP host environment, the organizational factors influencing clinical use of the system, and the methods used to evaluate its use. Data from 4581 provider encounters with the CCIS are summarized. Usage statistics are presented to illustrate the methodological possibilities for assessing the "benefits and burdens" of a computerized information system by using an automated collection of user demographics and program audit trails that allow evaluators to monitor user interactions with different segments of the database. PMID:1807583

Evaluation of a Computerized Clinical Information System (Micromedex).

PubMed

Lundsgaarde, H P; Moreshead, G E

1991-01-01

This paper summarizes data collected as part of a project designed to identify and assess the technical and organizational problems associated with the implementation and evaluation of a Computerized Clinical Information System (CCIS), Micromedex, in three U.S. Department of Veterans Affairs Medical Centers (VAMCs). The study began in 1987 as a national effort to implement decision support technologies in the Veterans Administration Decentralized Hospital Computer Program (DHCP). The specific objectives of this project were to (1) examine one particular decision support technology, (2) identify the technical and organizational barriers to the implementation of a CCIS in the VA host environment, (3) assess the possible benefits of this system to VA clinicians in terms of therapeutic decision making, and (4) develop new methods for identifying the clinical utility of a computer program designed to provide clinicians with a new information tool. The project was conducted intermittently over a three-year period at three VA medical centers chosen as implementation and evaluation test sites for Micromedex. Findings from the Kansas City Medical Center in Missouri are presented to illustrate some of the technical problems associated with the implementation of a commercial database program in the DHCP host environment, the organizational factors influencing clinical use of the system, and the methods used to evaluate its use. Data from 4581 provider encounters with the CCIS are summarized. Usage statistics are presented to illustrate the methodological possibilities for assessing the "benefits and burdens" of a computerized information system by using an automated collection of user demographics and program audit trails that allow evaluators to monitor user interactions with different segments of the database.

High Temperature Composite Analyzer (HITCAN) demonstration manual, version 1.0

NASA Technical Reports Server (NTRS)

Singhal, S. N; Lackney, J. J.; Murthy, P. L. N.

1993-01-01

This manual comprises a variety of demonstration cases for the HITCAN (HIgh Temperature Composite ANalyzer) code. HITCAN is a general purpose computer program for predicting nonlinear global structural and local stress-strain response of arbitrarily oriented, multilayered high temperature metal matrix composite structures. HITCAN is written in FORTRAN 77 computer language and has been configured and executed on the NASA Lewis Research Center CRAY XMP and YMP computers. Detailed description of all program variables and terms used in this manual may be found in the User's Manual. The demonstration includes various cases to illustrate the features and analysis capabilities of the HITCAN computer code. These cases include: (1) static analysis, (2) nonlinear quasi-static (incremental) analysis, (3) modal analysis, (4) buckling analysis, (5) fiber degradation effects, (6) fabrication-induced stresses for a variety of structures; namely, beam, plate, ring, shell, and built-up structures. A brief discussion of each demonstration case with the associated input data file is provided. Sample results taken from the actual computer output are also included.

Digitizing zone maps, using modified LARSYS program. [computer graphics and computer techniques for mapping

NASA Technical Reports Server (NTRS)

Giddings, L.; Boston, S.

1976-01-01

A method for digitizing zone maps is presented, starting with colored images and producing a final one-channel digitized tape. This method automates the work previously done interactively on the Image-100 and Data Analysis System computers of the Johnson Space Center (JSC) Earth Observations Division (EOD). A color-coded map was digitized through color filters on a scanner to form a digital tape in LARSYS-2 or JSC Universal format. The taped image was classified by the EOD LARSYS program on the basis of training fields included in the image. Numerical values were assigned to all pixels in a given class, and the resulting coded zone map was written on a LARSYS or Universal tape. A unique spatial filter option permitted zones to be made homogeneous and edges of zones to be abrupt transitions from one zone to the next. A zoom option allowed the output image to have arbitrary dimensions in terms of number of lines and number of samples on a line. Printouts of the computer program are given and the images that were digitized are shown.

Computer graphic of Lockheed Martin X-33 Reusable Launch Vehicle (RLV) mounted on NASA 747 ferry air

NASA Technical Reports Server (NTRS)

1997-01-01

This is an artist's conception of the NASA/Lockheed Martin X-33 Advanced Technology Demonstrator being carried on the back of the 747 Shuttle Carrier Aircraft. This was a concept for moving the X-33 from its landing site back to NASA's Dryden Flight Research Center, Edwards, California. The X-33 was a technology demonstrator vehicle for the Reusable Launch Vehicle (RLV). The RLV technology program was a cooperative agreement between NASA and industry. The goal of the RLV technology program was to enable significant reductions in the cost of access to space, and to promote the creation and delivery of new space services and other activities that will improve U.S. economic competitiveness. NASA Headquarter's Office of Space Access and Technology oversaw the RLV program, which was being managed by the RLV Office at NASA's Marshall Space Flight Center, located in Huntsville, Alabama. Responsibilities of other NASA Centers included: Johnson Space Center, Houston, Texas, guidance navigation and control technology, manned space systems, and health technology; Ames Research Center, Mountain View, CA., thermal protection system testing; Langley Research Center, Langley, Virginia, wind tunnel testing and aerodynamic analysis; and Kennedy Space Center, Florida, RLV operations and health management. Lockheed Martin's industry partners in the X-33 program are: Astronautics, Inc., Denver, Colorado, and Huntsville, Alabama; Engineering & Science Services, Houston, Texas; Manned Space Systems, New Orleans, LA; Sanders, Nashua, NH; and Space Operations, Titusville, Florida. Other industry partners are: Rocketdyne, Canoga Park, California; Allied Signal Aerospace, Teterboro, NJ; Rohr, Inc., Chula Vista, California; and Sverdrup Inc., St. Louis, Missouri.

Computer graphic of Lockheed Martin Venturestar Reusable Launch Vehicle (RLV) releasing a satellite

NASA Technical Reports Server (NTRS)

1997-01-01

This is an artist's conception of the NASA/Lockheed Martin Single-Stage-To-Orbit (SSTO) Reusable Launch Vehicle (RLV) releasing a satellite into orbit around the earth. NASA's Dryden Flight Research Center, Edwards, California, was to play a key role in the development and flight testing of the X-33, which is a technology demonstrator vehicle for the RLV. The RLV technology program was a cooperative agreement between NASA and industry. The goal of the RLV technology program was to enable significant reductions in the cost of access to space, and to promote the creation and delivery of new space services and other activities that were to improve U.S. economic competitiveness. NASA Headquarter's Office of Space Access and Technology oversaw the RLV program, which was being managed by the RLV Office at NASA's Marshall Space Flight Center, located in Huntsville, Alabama. Responsibilities of other NASA Centers included: Johnson Space Center, Houston, Texas, guidance navigation and control technology, manned space systems, and health technology; Ames Research Center, Mountain View, CA., thermal protection system testing; Langley Research Center, Langley, Virginia, wind tunnel testing and aerodynamic analysis; and Kennedy Space Center, Florida, RLV operations and health management. Lockheed Martin's industry partners in the X-33 program are: Astronautics, Inc., Denver, Colorado, and Huntsville, Alabama; Engineering & Science Services, Houston, Texas; Manned Space Systems, New Orleans, LA; Sanders, Nashua, NH; and Space Operations, Titusville, Florida. Other industry partners are: Rocketdyne, Canoga Park, California; Allied Signal Aerospace, Teterboro, NJ; Rohr, Inc., Chula Vista, California; and Sverdrup Inc., St. Louis, Missouri.

Python in the NERSC Exascale Science Applications Program for Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronaghi, Zahra; Thomas, Rollin; Deslippe, Jack

We describe a new effort at the National Energy Re- search Scientific Computing Center (NERSC) in performance analysis and optimization of scientific Python applications targeting the Intel Xeon Phi (Knights Landing, KNL) many- core architecture. The Python-centered work outlined here is part of a larger effort called the NERSC Exascale Science Applications Program (NESAP) for Data. NESAP for Data focuses on applications that process and analyze high-volume, high-velocity data sets from experimental/observational science (EOS) facilities supported by the US Department of Energy Office of Science. We present three case study applications from NESAP for Data that use Python. These codesmore » vary in terms of “Python purity” from applications developed in pure Python to ones that use Python mainly as a convenience layer for scientists without expertise in lower level programming lan- guages like C, C++ or Fortran. The science case, requirements, constraints, algorithms, and initial performance optimizations for each code are discussed. Our goal with this paper is to contribute to the larger conversation around the role of Python in high-performance computing today and tomorrow, highlighting areas for future work and emerging best practices« less

CSI computer system/remote interface unit acceptance test results

NASA Technical Reports Server (NTRS)

Sparks, Dean W., Jr.

1992-01-01

The validation tests conducted on the Control/Structures Interaction (CSI) Computer System (CCS)/Remote Interface Unit (RIU) is discussed. The CCS/RIU consists of a commercially available, Langley Research Center (LaRC) programmed, space flight qualified computer and a flight data acquisition and filtering computer, developed at LaRC. The tests were performed in the Space Structures Research Laboratory (SSRL) and included open loop excitation, closed loop control, safing, RIU digital filtering, and RIU stand alone testing with the CSI Evolutionary Model (CEM) Phase-0 testbed. The test results indicated that the CCS/RIU system is comparable to ground based systems in performing real-time control-structure experiments.

Tropical Ocean and Global Atmosphere (TOGA) heat exchange project: A summary report

NASA Technical Reports Server (NTRS)

Liu, W. T.; Niiler, P. P.

1985-01-01

A pilot data center to compute ocean atmosphere heat exchange over the tropical ocean is prposed at the Jet Propulsion Laboratory (JPL) in response to the scientific needs of the Tropical Ocean and Global Atmosphere (TOGA) Program. Optimal methods will be used to estimate sea surface temperature (SET), surface wind speed, and humidity from spaceborne observations. A monthly summary of these parameters will be used to compute ocean atmosphere latent heat exchanges. Monthly fields of surface heat flux over tropical oceans will be constructed using estimations of latent heat exchanges and short wave radiation from satellite data. Verification of all satellite data sets with in situ measurements at a few locations will be provided. The data center will be an experimental active archive where the quality and quantity of data required for TOGA flux computation are managed. The center is essential to facilitate the construction of composite data sets from global measurements taken from different sensors on various satellites. It will provide efficient utilization and easy access to the large volume of satellite data available for studies of ocean atmosphere energy exchanges.

Mark F. Davis | NREL

Science.gov Websites

| 303-384-6140 Orcid ID http://orcid.org/0000-0003-4541-9852 Research Interests Dr. Mark Davis is the years, he has served as the Platform Program Manager for Thermochemical and has directed research Science Center, including high throughput recalcitrance assays, omics research, computational modeling

75 FR 17376 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

... submitted to the Office of Management and Budget (OMB) for clearance the following proposal for collection... Opportunities Program (BTOP): Comprehensive Community Infrastructure, Public Computer Center, and Sustainable...) projects. For at least a 15-day period, NTIA will post an announcement on BroadbandUSA.gov identifying all...

Swarmathon 2017

NASA Image and Video Library

2017-04-19

A Swarmie robot finds a "resource" cube marked with an AprilTag, similar to a barcode. In the Swarmathon competition at the Kennedy Space Center Visitor Complex, students were asked to develop computer code for the small robots, programming them to look for "resources" in the form of cubes with AprilTags.

Potential of Spark Ignition Engine, Effect of Vehicle Design Variables on Top Speed, Performance, and Fuel Economy

DOT National Transportation Integrated Search

1980-03-01

The purpose of this report is to evaluate the effect of vehicle characteristics on vehicle performance and fuel economy. The studies were performed using the VEHSIM (vehicle simulation) program at the Transportation Systems Center. The computer simul...

Photogrammetric Technique for Center of Gravity Determination

NASA Technical Reports Server (NTRS)

Jones, Thomas W.; Johnson, Thomas H.; Shemwell, Dave; Shreves, Christopher M.

2012-01-01

A new measurement technique for determination of the center of gravity (CG) for large scale objects has been demonstrated. The experimental method was conducted as part of an LS-DYNA model validation program for the Max Launch Abort System (MLAS) crew module. The test was conducted on the full scale crew module concept at NASA Langley Research Center. Multi-camera photogrammetry was used to measure the test article in several asymmetric configurations. The objective of these measurements was to provide validation of the CG as computed from the original mechanical design. The methodology, measurement technique, and measurement results are presented.

United States Air Force Summer Research Program -- 1993. Volume 6. Arnold Engineering Development Center, Frank J. Seiler Research Laboratory, Wilford Hall Medical Center

DTIC Science & Technology

1993-12-01

where negative charge state. The local symmetry of the Ge(I) and Ge(II) centers are CI and C2 respectively. (See also Fig. 1.) q=- 1 Ge(I) Ge(II) s p...Raymond Field: Dept. of Computer Science Dept, CEM. M•e s , PhD Laboratory: / 3200 Willow Creek Road zmbry-Riddle Aeronautical Univ Vol-Page No: 0- 0...Field: Electrical Engineering Assistant Professor, PhD Laboratory: PL/WS 2390 S . York Street University of Denver Vol-Page No: 3-35 Denver, CO 80209-0177

The TeraShake Computational Platform for Large-Scale Earthquake Simulations

NASA Astrophysics Data System (ADS)

Cui, Yifeng; Olsen, Kim; Chourasia, Amit; Moore, Reagan; Maechling, Philip; Jordan, Thomas

Geoscientific and computer science researchers with the Southern California Earthquake Center (SCEC) are conducting a large-scale, physics-based, computationally demanding earthquake system science research program with the goal of developing predictive models of earthquake processes. The computational demands of this program continue to increase rapidly as these researchers seek to perform physics-based numerical simulations of earthquake processes for larger meet the needs of this research program, a multiple-institution team coordinated by SCEC has integrated several scientific codes into a numerical modeling-based research tool we call the TeraShake computational platform (TSCP). A central component in the TSCP is a highly scalable earthquake wave propagation simulation program called the TeraShake anelastic wave propagation (TS-AWP) code. In this chapter, we describe how we extended an existing, stand-alone, wellvalidated, finite-difference, anelastic wave propagation modeling code into the highly scalable and widely used TS-AWP and then integrated this code into the TeraShake computational platform that provides end-to-end (initialization to analysis) research capabilities. We also describe the techniques used to enhance the TS-AWP parallel performance on TeraGrid supercomputers, as well as the TeraShake simulations phases including input preparation, run time, data archive management, and visualization. As a result of our efforts to improve its parallel efficiency, the TS-AWP has now shown highly efficient strong scaling on over 40K processors on IBM’s BlueGene/L Watson computer. In addition, the TSCP has developed into a computational system that is useful to many members of the SCEC community for performing large-scale earthquake simulations.

A Programming Framework for Scientific Applications on CPU-GPU Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owens, John

2013-03-24

At a high level, my research interests center around designing, programming, and evaluating computer systems that use new approaches to solve interesting problems. The rapid change of technology allows a variety of different architectural approaches to computationally difficult problems, and a constantly shifting set of constraints and trends makes the solutions to these problems both challenging and interesting. One of the most important recent trends in computing has been a move to commodity parallel architectures. This sea change is motivated by the industry’s inability to continue to profitably increase performance on a single processor and instead to move to multiplemore » parallel processors. In the period of review, my most significant work has been leading a research group looking at the use of the graphics processing unit (GPU) as a general-purpose processor. GPUs can potentially deliver superior performance on a broad range of problems than their CPU counterparts, but effectively mapping complex applications to a parallel programming model with an emerging programming environment is a significant and important research problem.« less

Delivering health information about self-medication to older adults: use of touchscreen-equipped notebook computers.

PubMed

Neafsey, P J; Strickler, Z; Shellman, J; Padula, A T

2001-11-01

Preventing Drug Interactions in Active Older Adults is an educational intervention to prevent prescription and over-the-counter (OTC) drug and alcohol interactions in active, community-living older adults. The objectives of the program are to increase older adults' knowledge of potential interactions of prescription medications with OTC drugs and alcohol and to increase their confidence (self-efficacy) about how to avoid such interactions. An interactive multimedia computer software program (Personal Education Program or PEP) was designed for the learning styles and psychomotor skills of older adults. Focus groups of older adults evaluated PEP components in a formative manner during development. The program content dealing with antacids, calcium supplements, and acid reducers was pilot tested with 60 older adults recruited from local senior centers. Participants used the PEP on notebook computers equipped with infrared-sensitive touchscreens. Users of PEP had greater knowledge and self-efficacy scores than controls. Participants indicated a high degree of satisfaction with the PEP and reported their intent to make specific changes in self-medication behaviors.

Coherent Lidar Activities at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Kavaya, Michael J.; Amzajerdian, Farzin; Koch, Grady J.; Singh, Upendra N.; Yu, Jirong

2007-01-01

NASA Langley Research Center has been developing and using coherent lidar systems for many years. The current projects at LaRC are the Global Wind Observing Sounder (GWOS) mission preparation, the Laser Risk Reduction Program (LRRP), the Instrument Incubator Program (IIP) compact, rugged Doppler wind lidar project, the Autonomous precision Landing and Hazard detection and Avoidance Technology (ALHAT) project for lunar landing, and the Skywalker project to find and use thermals to extend UAV flight time. These five projects encompass coherent lidar technology development; characterization, validation, and calibration facilities; compact, rugged packaging; computer simulation; trade studies; data acquisition, processing, and display development; system demonstration; and space mission design. This paper will further discuss these activities at LaRC.

V/STOLAND avionics system flight-test data on a UH-1H helicopter

NASA Technical Reports Server (NTRS)

Baker, F. A.; Jaynes, D. N.; Corliss, L. D.; Liden, S.; Merrick, R. B.; Dugan, D. C.

1980-01-01

The flight-acceptance test results obtained during the acceptance tests of the V/STOLAND (versatile simplex digital avionics system) digital avionics system on a Bell UH-1H helicopter in 1977 at Ames Research Center are presented. The system provides navigation, guidance, control, and display functions for NASA terminal area VTOL research programs and for the Army handling qualities research programs at Ames Research Center. The acceptance test verified system performance and contractual acceptability. The V/STOLAND hardware navigation, guidance, and control laws resident in the digital computers are described. Typical flight-test data are shown and discussed as documentation of the system performance at acceptance from the contractor.

Initial Flight Test of the Production Support Flight Control Computers at NASA Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Carter, John; Stephenson, Mark

1999-01-01

The NASA Dryden Flight Research Center has completed the initial flight test of a modified set of F/A-18 flight control computers that gives the aircraft a research control law capability. The production support flight control computers (PSFCC) provide an increased capability for flight research in the control law, handling qualities, and flight systems areas. The PSFCC feature a research flight control processor that is "piggybacked" onto the baseline F/A-18 flight control system. This research processor allows for pilot selection of research control law operation in flight. To validate flight operation, a replication of a standard F/A-18 control law was programmed into the research processor and flight-tested over a limited envelope. This paper provides a brief description of the system, summarizes the initial flight test of the PSFCC, and describes future experiments for the PSFCC.

A Computer Program to Model Passive Acoustic Antisubmarine Search Using Monte Carlo Simulation Techniques.

DTIC Science & Technology

1983-09-01

duplicate a continuous function on a digital computer, and thus the machine representatic- of the GMA is only a close approximation of the continuous...error process. Thus, the manner in which the GMA process is digitally replicated has an effect on the results of the simulation. The parameterization of...Information Center 2 Cameron Station Alexandria, Virginia 22314 2. Libary , Code 0142 2 Naval Postgraduate School Monterey, California 93943 3. Professor

Thermohydrodynamic Analysis of Cryogenic Liquid Turbulent Flow Fluid Film Bearings

NASA Technical Reports Server (NTRS)

San Andres, Luis

1996-01-01

This report describes a thermohydrodynamic analysis and computer programs for the prediction of the static and dynamic force response of fluid film bearings for cryogenic applications. The research performed addressed effectively the most important theoretical and practical issues related to the operation and performance of cryogenic fluid film bearings. Five computer codes have been licensed by the Texas A&M University to NASA centers and contractors and a total of 14 technical papers have been published.

Experiences in using the CYBER 203 for three-dimensional transonic flow calculations

NASA Technical Reports Server (NTRS)

Melson, N. D.; Keller, J. D.

1982-01-01

In this paper, the authors report on some of their experiences modifying two three-dimensional transonic flow programs (FLO22 and FLO27) for use on the NASA Langley Research Center CYBER 203. Both of the programs discussed were originally written for use on serial machines. Several methods were attempted to optimize the execution of the two programs on the vector machine, including: (1) leaving the program in a scalar form (i.e., serial computation) with compiler software used to optimize and vectorize the program, (2) vectorizing parts of the existing algorithm in the program, and (3) incorporating a new vectorizable algorithm (ZEBRA I or ZEBRA II) in the program.

A uniform approach for programming distributed heterogeneous computing systems

PubMed Central

Grasso, Ivan; Pellegrini, Simone; Cosenza, Biagio; Fahringer, Thomas

2014-01-01

Large-scale compute clusters of heterogeneous nodes equipped with multi-core CPUs and GPUs are getting increasingly popular in the scientific community. However, such systems require a combination of different programming paradigms making application development very challenging. In this article we introduce libWater, a library-based extension of the OpenCL programming model that simplifies the development of heterogeneous distributed applications. libWater consists of a simple interface, which is a transparent abstraction of the underlying distributed architecture, offering advanced features such as inter-context and inter-node device synchronization. It provides a runtime system which tracks dependency information enforced by event synchronization to dynamically build a DAG of commands, on which we automatically apply two optimizations: collective communication pattern detection and device-host-device copy removal. We assess libWater’s performance in three compute clusters available from the Vienna Scientific Cluster, the Barcelona Supercomputing Center and the University of Innsbruck, demonstrating improved performance and scaling with different test applications and configurations. PMID:25844015

A uniform approach for programming distributed heterogeneous computing systems.

PubMed

Grasso, Ivan; Pellegrini, Simone; Cosenza, Biagio; Fahringer, Thomas

2014-12-01

Large-scale compute clusters of heterogeneous nodes equipped with multi-core CPUs and GPUs are getting increasingly popular in the scientific community. However, such systems require a combination of different programming paradigms making application development very challenging. In this article we introduce libWater, a library-based extension of the OpenCL programming model that simplifies the development of heterogeneous distributed applications. libWater consists of a simple interface, which is a transparent abstraction of the underlying distributed architecture, offering advanced features such as inter-context and inter-node device synchronization. It provides a runtime system which tracks dependency information enforced by event synchronization to dynamically build a DAG of commands, on which we automatically apply two optimizations: collective communication pattern detection and device-host-device copy removal. We assess libWater's performance in three compute clusters available from the Vienna Scientific Cluster, the Barcelona Supercomputing Center and the University of Innsbruck, demonstrating improved performance and scaling with different test applications and configurations.

NASA Lewis' IITA K-12 Program

NASA Technical Reports Server (NTRS)

1996-01-01

The NASA Lewis Research Center's Information Infrastructure Technology and Applications for Kindergarten to 12th Grade (IITA K-12) Program is designed to introduce into school systems computing and communications technology that benefits math and science studies. By incorporating this technology into K-12 curriculums, we hope to increase the proficiency and interest in math and science subjects by K-12 students so that they continue to study technical subjects after their high school careers are over.

The 1989 NASA-ASEE Summer Faculty Fellowship Program in Aeronautics and Research

NASA Technical Reports Server (NTRS)

Boroson, Harold R.; Soffen, Gerald A.; Fan, Dah-Nien

1989-01-01

The 1989 NASA-ASEE Summer Faculty Fellowship Program at the Goddard Space Flight Center was conducted during 5 Jun. 1989 to 11 Aug. 1989. The research projects were previously assigned. Work summaries are presented for the following topics: optical properties data base; particle acceleration; satellite imagery; telemetry workstation; spectroscopy; image processing; stellar spectra; optical radar; robotics; atmospheric composition; semiconductors computer networks; remote sensing; software engineering; solar flares; and glaciers.

Motion Cueing Algorithm Development: New Motion Cueing Program Implementation and Tuning

NASA Technical Reports Server (NTRS)

Houck, Jacob A. (Technical Monitor); Telban, Robert J.; Cardullo, Frank M.; Kelly, Lon C.

2005-01-01

A computer program has been developed for the purpose of driving the NASA Langley Research Center Visual Motion Simulator (VMS). This program includes two new motion cueing algorithms, the optimal algorithm and the nonlinear algorithm. A general description of the program is given along with a description and flowcharts for each cueing algorithm, and also descriptions and flowcharts for subroutines used with the algorithms. Common block variable listings and a program listing are also provided. The new cueing algorithms have a nonlinear gain algorithm implemented that scales each aircraft degree-of-freedom input with a third-order polynomial. A description of the nonlinear gain algorithm is given along with past tuning experience and procedures for tuning the gain coefficient sets for each degree-of-freedom to produce the desired piloted performance. This algorithm tuning will be needed when the nonlinear motion cueing algorithm is implemented on a new motion system in the Cockpit Motion Facility (CMF) at the NASA Langley Research Center.

Toroidal transformer design program with application to inverter circuitry

NASA Technical Reports Server (NTRS)

Dayton, J. A., Jr.

1972-01-01

Estimates of temperature, weight, efficiency, regulation, and final dimensions are included in the output of the computer program for the design of transformers for use in the basic parallel inverter. The program, written in FORTRAN 4, selects a tape wound toroidal magnetic core and, taking temperature, materials, core geometry, skin depth, and ohmic losses into account, chooses the appropriate wire sizes and number of turns for the center tapped primary and single secondary coils. Using the program, 2- and 4-kilovolt-ampere transformers are designed for frequencies from 200 to 3200 Hz and the efficiency of a basic transistor inverter is estimated.

On-orbit free molecular flow aerodynamic characteristics of a proposal space operations center configuration

NASA Technical Reports Server (NTRS)

Romere, P. O.

1982-01-01

A proposed configuration for a Space Operations Center is presented in its eight stages of buildup. The on orbit aerodynamic force and moment characteristics were calculated for each stage based upon free molecular flow theory. Calculation of the aerodynamic characteristics was accomplished through the use of an orbital aerodynamic computer program, and the computation method is described with respect to the free molecular theory used. The aerodynamic characteristics are presented in tabulated form for each buildup stage at angles of attack from 0 to 360 degrees and roll angles from -60 to +60 degrees. The reference altitude is 490 kilometers, however, the data should be applicable for altitudes below 490 kilometers down to approximately 185 kilometers.

Integrated computer-aided design using minicomputers

NASA Technical Reports Server (NTRS)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Restructuring VA ambulatory care and medical education: the PACE model of primary care.

PubMed

Cope, D W; Sherman, S; Robbins, A S

1996-07-01

The Veterans Health Administration (VHA) Western Region and associated medical schools formulated a set of recommendations for an improved ambulatory health care delivery system during a 1988 strategic planning conference. As a result, the Department of Veterans Affairs (VA) Medical Center in Sepulveda, California, initiated the Pilot (now Primary) Ambulatory Care and Education (PACE) program in 1990 to implement and evaluate a model program. The PACE program represents a significant departure from traditional VA and non-VA academic medical center care, shifting the focus of care from the inpatient to the outpatient setting. From its inception, the PACE program has used an interdisciplinary team approach with three independent global care firms. Each firm is interdisciplinary in composition, with a matrix management structure that expands role function and empowers team members. Emphasis is on managed primary care, stressing a biopsychosocial approach and cost-effective comprehensive care emphasizing prevention and health maintenance. Information management is provided through a network of personal computers that serve as a front end to the VHA Decentralized Hospital Computer Program (DHCP) mainframe. In addition to providing comprehensive and cost-effective care, the PACE program educates trainees in all health care disciplines, conducts research, and disseminates information about important procedures and outcomes. Undergraduate and graduate trainees from 11 health care disciplines rotate through the PACE program to learn an integrated approach to managed ambulatory care delivery. All trainees are involved in a problem-based approach to learning that emphasizes shared training experiences among health care disciplines. This paper describes the transitional phases of the PACE program (strategic planning, reorganization, and quality improvement) that are relevant for other institutions that are shifting to training programs emphasizing primary and ambulatory care.

Flight test validation of a design procedure for digital autopilots

NASA Technical Reports Server (NTRS)

Bryant, W. H.

1983-01-01

Commercially available general aviation autopilots are currently in transition from an analogue circuit system to a computer implemented digital flight control system. Well known advantages of the digital autopilot include enhanced modes, self-test capacity, fault detection, and greater computational capacity. A digital autopilot's computational capacity can be used to full advantage by increasing the sophistication of the digital autopilot's chief function, stability and control. NASA's Langley Research Center has been pursuing the development of direct digital design tools for aircraft stabilization systems for several years. This effort has most recently been directed towards the development and realization of multi-mode digital autopilots for GA aircraft, conducted under a SPIFR-related program called the General Aviation Terminal Operations Research (GATOR) Program. This presentation focuses on the implementation and testing of a candidate multi-mode autopilot designed using these newly developed tools.

Real Time Flood Alert System (RTFAS) for Puerto Rico

USGS Publications Warehouse

Lopez-Trujillo, Dianne

2010-01-01

The Real Time Flood Alert System is a web-based computer program, developed as a data integration tool, and designed to increase the ability of emergency managers to rapidly and accurately predict flooding conditions of streams in Puerto Rico. The system includes software and a relational database to determine the spatial and temporal distribution of rainfall, water levels in streams and reservoirs, and associated storms to determine hazardous and potential flood conditions. The computer program was developed as part of a cooperative agreement between the U.S. Geological Survey Caribbean Water Science Center and the Puerto Rico Emergency Management Agency, and integrates information collected and processed by these two agencies and the National Weather Service.

NAS Technical Summaries, March 1993 - February 1994

NASA Technical Reports Server (NTRS)

1995-01-01

NASA created the Numerical Aerodynamic Simulation (NAS) Program in 1987 to focus resources on solving critical problems in aeroscience and related disciplines by utilizing the power of the most advanced supercomputers available. The NAS Program provides scientists with the necessary computing power to solve today's most demanding computational fluid dynamics problems and serves as a pathfinder in integrating leading-edge supercomputing technologies, thus benefitting other supercomputer centers in government and industry. The 1993-94 operational year concluded with 448 high-speed processor projects and 95 parallel projects representing NASA, the Department of Defense, other government agencies, private industry, and universities. This document provides a glimpse at some of the significant scientific results for the year.

A User's Guide for the Differential Reduced Ejector/Mixer Analysis "DREA" Program. 1.0

NASA Technical Reports Server (NTRS)

DeChant, Lawrence J.; Nadell, Shari-Beth

1999-01-01

A system of analytical and numerical two-dimensional mixer/ejector nozzle models that require minimal empirical input has been developed and programmed for use in conceptual and preliminary design. This report contains a user's guide describing the operation of the computer code, DREA (Differential Reduced Ejector/mixer Analysis), that contains these mathematical models. This program is currently being adopted by the Propulsion Systems Analysis Office at the NASA Glenn Research Center. A brief summary of the DREA method is provided, followed by detailed descriptions of the program input and output files. Sample cases demonstrating the application of the program are presented.

Institutional shared resources and translational cancer research.

PubMed

De Paoli, Paolo

2009-06-29

The development and maintenance of adequate shared infrastructures is considered a major goal for academic centers promoting translational research programs. Among infrastructures favoring translational research, centralized facilities characterized by shared, multidisciplinary use of expensive laboratory instrumentation, or by complex computer hardware and software and/or by high professional skills are necessary to maintain or improve institutional scientific competitiveness. The success or failure of a shared resource program also depends on the choice of appropriate institutional policies and requires an effective institutional governance regarding decisions on staffing, existence and composition of advisory committees, policies and of defined mechanisms of reporting, budgeting and financial support of each resource. Shared Resources represent a widely diffused model to sustain cancer research; in fact, web sites from an impressive number of research Institutes and Universities in the U.S. contain pages dedicated to the SR that have been established in each Center, making a complete view of the situation impossible. However, a nation-wide overview of how Cancer Centers develop SR programs is available on the web site for NCI-designated Cancer Centers in the U.S., while in Europe, information is available for individual Cancer centers. This article will briefly summarize the institutional policies, the organizational needs, the characteristics, scientific aims, and future developments of SRs necessary to develop effective translational research programs in oncology.In fact, the physical build-up of SRs per se is not sufficient for the successful translation of biomedical research. Appropriate policies to improve the academic culture in collaboration, the availability of educational programs for translational investigators, the existence of administrative facilitations for translational research and an efficient organization supporting clinical trial recruitment and management represent essential tools, providing solutions to overcome existing barriers in the development of translational research in biomedical research centers.

Institutional shared resources and translational cancer research

PubMed Central

De Paoli, Paolo

2009-01-01

The development and maintenance of adequate shared infrastructures is considered a major goal for academic centers promoting translational research programs. Among infrastructures favoring translational research, centralized facilities characterized by shared, multidisciplinary use of expensive laboratory instrumentation, or by complex computer hardware and software and/or by high professional skills are necessary to maintain or improve institutional scientific competitiveness. The success or failure of a shared resource program also depends on the choice of appropriate institutional policies and requires an effective institutional governance regarding decisions on staffing, existence and composition of advisory committees, policies and of defined mechanisms of reporting, budgeting and financial support of each resource. Shared Resources represent a widely diffused model to sustain cancer research; in fact, web sites from an impressive number of research Institutes and Universities in the U.S. contain pages dedicated to the SR that have been established in each Center, making a complete view of the situation impossible. However, a nation-wide overview of how Cancer Centers develop SR programs is available on the web site for NCI-designated Cancer Centers in the U.S., while in Europe, information is available for individual Cancer centers. This article will briefly summarize the institutional policies, the organizational needs, the characteristics, scientific aims, and future developments of SRs necessary to develop effective translational research programs in oncology. In fact, the physical build-up of SRs per se is not sufficient for the successful translation of biomedical research. Appropriate policies to improve the academic culture in collaboration, the availability of educational programs for translational investigators, the existence of administrative facilitations for translational research and an efficient organization supporting clinical trial recruitment and management represent essential tools, providing solutions to overcome existing barriers in the development of translational research in biomedical research centers. PMID:19563639

NASA CORE (Central Operation of Resources for Educators) Educational Materials Catalog

NASA Technical Reports Server (NTRS)

1998-01-01

This educational materials catalog presents NASA CORE (Central Operation of Resources for Educators). The topics include: 1) Videocassettes (Aeronautics, Earth Resources, Weather, Space Exploration/Satellites, Life Sciences, Careers); 2) Slide Programs; 3) Computer Materials; 4) NASA Memorabilia/Miscellaneous; 5) NASA Educator Resource Centers; 6) and NASA Resources.

Graduate Statistics: Student Attitudes

ERIC Educational Resources Information Center

Kennedy, Robert L.; Broadston, Pamela M.

2004-01-01

This study investigated the attitudes toward statistics of graduate students who used a computer program as part of the instruction, which allowed for an individualized, self-paced, student-centered, activity-based course. The twelve sections involved in this study were offered in the spring and fall 2001, spring and fall 2002, spring and fall…

OCLC and Its Advisory Committees.

ERIC Educational Resources Information Center

Baker, Shirley K.

1998-01-01

Describes the Online Computer Library Center (OCLC) advisory committees in terms of research, public, college and university, and special libraries. All four of the type-of-library advisory groups work to shape OCLC policies and programs, according to the particular needs of each group. OCLC's financial and programmatic success depends upon…

Teaching Human-Centered Security Using Nontraditional Techniques

ERIC Educational Resources Information Center

Renaud, Karen; Cutts, Quintin

2013-01-01

Computing science students amass years of programming experience and a wealth of factual knowledge in their undergraduate courses. Based on our combined years of experience, however, one of our students' abiding shortcomings is that they think there is only "one correct answer" to issues in most courses: an "idealistic"…

Meriden Public Library, Final Performance Report for Library Services and Construction Act (LSCA) Title VI, Library Literacy Program.

ERIC Educational Resources Information Center

MacCabe, Bruce

The Literacy Learning Center Project, a project of the Meriden Public Library (Connecticut), targeted the educationally underserved and functionally illiterate, and involved recruitment, retention, space renovation, coalition building, public awareness, training, basic literacy, collection development, tutoring, computer assisted services, and…

Kidspiration[R] for Inquiry-Centered Activities

ERIC Educational Resources Information Center

Shaw, Edward L., Jr.; Baggett, Paige V.; Salyer, Barbara

2004-01-01

Computer technology can be integrated into science inquiry activities to increase student motivation and enhance and expand scientific thinking. Fifth-grade students used the visual thinking tools in the Kidspiration[R] software program to generate and represent a web of hypotheses around the question, "What affects the distance a marble rolls?"…

The Use of Tailored Testing with Instructional Programs. Final Report.

ERIC Educational Resources Information Center

Reckase, Mark D.

A computerized testing system was implemented in conjunction with the Radar Technician Training Course at the Naval Training Center, Great Lakes, Illinois. The feasibility of the system and students' attitudes toward it were examined. The system, a multilevel, microprocessor-based computer network, administered tests in a sequential, fixed length…

Computer Lessons for Written Harmony. Final Project Report.

ERIC Educational Resources Information Center

Arenson, Michael A.

This project was created to help music students in their development of part-writing and harmonization skills, requirements for college-level music study. It was developed and programmed by members of the Instructional Technology Center and Department of Music at the University of Delaware. The software developed during this project provides…

Alginate Immobilization of Metabolic Enzymes (AIME) for High-Throughput Screening Assays (SOT)

EPA Science Inventory

Alginate Immobilization of Metabolic Enzymes (AIME) for High-Throughput Screening Assays DE DeGroot, RS Thomas, and SO SimmonsNational Center for Computational Toxicology, US EPA, Research Triangle Park, NC USAThe EPA’s ToxCast program utilizes a wide variety of high-throughput s...

After School in a Colonia.

ERIC Educational Resources Information Center

Castillo, Yolanda; Winchester, Martin

2001-01-01

In 1999, two schools in an impoverished border town in Texas received 3-year federal grants from the 21st Century Community Learning Centers program to support varied after-hours activities: academic tutoring, computer literacy, "ballet folklorico," arts and crafts, guitar instruction, and service learning. Students and parents now have a safe…

Development of a High Resolution Weather Forecast Model for Mesoamerica Using the NASA Ames Code I Private Cloud Computing Environment

NASA Technical Reports Server (NTRS)

Molthan, Andrew; Case, Jonathan; Venner, Jason; Moreno-Madrinan, Max J.; Delgado, Francisco

2012-01-01

Two projects at NASA Marshall Space Flight Center have collaborated to develop a high resolution weather forecast model for Mesoamerica: The NASA Short-term Prediction Research and Transition (SPoRT) Center, which integrates unique NASA satellite and weather forecast modeling capabilities into the operational weather forecasting community. NASA's SERVIR Program, which integrates satellite observations, ground-based data, and forecast models to improve disaster response in Central America, the Caribbean, Africa, and the Himalayas.

Symposium on Automation, Robotics and Advanced Computing for the National Space Program (2nd) Held in Arlington, Virginia on 9-11 March 1987

DTIC Science & Technology

1988-02-28

enormous investment in software. This is an area extremely important objective. We need additional where better methodologies , tools and theories...microscopy (SEM) and optical mi- [131 Hanson, A., et a. "A Methodology for the Develop- croscopy. Current activities include the study of SEM im- ment...through a phased knowledge engineering methodology Center (ARC) and NASA Johnson Space Center consisting of: prototype knowledge base develop- iJSC

Research Reports: 1988 NASA/ASEE Summer Faculty Fellowship Program

NASA Technical Reports Server (NTRS)

Freeman, L. Michael (Editor); Chappell, Charles R. (Editor); Cothran, Ernestine K. (Editor); Karr, Gerald R. (Editor)

1988-01-01

The basic objectives are to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA: to enrich and refresh the research and teaching activities of the participants' institutions; and to contribute to the research objectives of the NASA centers. Topics addressed include: cryogenics; thunderstorm simulation; computer techniques; computer assisted instruction; system analysis weather forecasting; rocket engine design; crystal growth; control systems design; turbine pumps for the Space Shuttle Main engine; electron mobility; heat transfer predictions; rotor dynamics; mathematical models; computational fluid dynamics; and structural analysis.

Investigation of chemically-reacting supersonic internal flows

NASA Technical Reports Server (NTRS)

Chitsomboon, T.; Tiwari, S. N.

1985-01-01

This report covers work done on the research project Analysis and Computation of Internal Flow Field in a Scramjet Engine. The work is supported by the NASA Langley Research Center (Computational Methods Branch of the High-Speed Aerodynamics Division) through research grant NAG1-423. The governing equations of two-dimensional chemically-reacting flows are presented together with the global two-step chemistry model. The finite-difference algorithm used is illustrated and the method of circumventing the stiffness is discussed. The computer program developed is used to solve two model problems of a premixed chemically-reacting flow. The results obtained are physically reasonable.

X-Windows PVT Widget Class

NASA Technical Reports Server (NTRS)

Barry, Matthew R.

2006-01-01

The X-Windows Process Validation Table (PVT) Widget Class ( Class is used here in the object-oriented-programming sense of the word) was devised to simplify the task of implementing network registration services for Information Sharing Protocol (ISP) graphical-user-interface (GUI) computer programs. Heretofore, ISP PVT programming tasks have required many method calls to identify, query, and interpret the connections and messages exchanged between a client and a PVT server. Normally, programmers have utilized direct access to UNIX socket libraries to implement the PVT protocol queries, necessitating the use of many lines of source code to perform frequent tasks. Now, the X-Windows PVT Widget Class encapsulates ISP client server network registration management tasks within the framework of an X Windows widget. Use of the widget framework enables an X Windows GUI program to interact with PVT services in an abstract way and in the same manner as that of other graphical widgets, making it easier to program PVT clients. Wrapping the PVT services inside the widget framework enables a programmer to treat a PVT server interface as though it were a GUI. Moreover, an alternate subclass could implement another service in a widget of the same type. This program was written by Matthew R. Barry of United Space Alliance for Johnson Space Center. For further information, contact the Johnson Technology Transfer Office at (281) 483-3809. MSC-23582 Shuttle Data Center File- Processing Tool in Java A Java-language computer program has been written to facilitate mining of data in files in the Shuttle Data Center (SDC) archives. This program can be executed on a variety of workstations or via Web-browser programs. This program is partly similar to prior C-language programs used for the same purpose, while differing from those programs in that it exploits the platform-neutrality of Java in implementing several features that are important for analysis of large sets of time-series data. The program supports regular expression queries of SDC archive files, reads the files, interleaves the time-stamped samples according to a chosen output, then transforms the results into that format. A user can choose among a variety of output file formats that are useful for diverse purposes, including plotting, Markov modeling, multivariate density estimation, and wavelet multiresolution analysis, as well as for playback of data in support of simulation and testing.

Outcomes from a pilot study using computer-based rehabilitative tools in a military population.

PubMed

Sullivan, Katherine W; Quinn, Julia E; Pramuka, Michael; Sharkey, Laura A; French, Louis M

2012-01-01

Novel therapeutic approaches and outcome data are needed for cognitive rehabilitation for patients with a traumatic brain injury; computer-based programs may play a critical role in filling existing knowledge gaps. Brain-fitness computer programs can complement existing therapies, maximize neuroplasticity, provide treatment beyond the clinic, and deliver objective efficacy data. However, these approaches have not been extensively studied in the military and traumatic brain injury population. Walter Reed National Military Medical Center established its Brain Fitness Center (BFC) in 2008 as an adjunct to traditional cognitive therapies for wounded warriors. The BFC offers commercially available "brain-training" products for military Service Members to use in a supportive, structured environment. Over 250 Service Members have utilized this therapeutic intervention. Each patient receives subjective assessments pre and post BFC participation including the Mayo-Portland Adaptability Inventory-4 (MPAI-4), the Neurobehavioral Symptom Inventory (NBSI), and the Satisfaction with Life Scale (SWLS). A review of the first 29 BFC participants, who finished initial and repeat measures, was completed to determine the effectiveness of the BFC program. Two of the three questionnaires of self-reported symptom change completed before and after participation in the BFC revealed a statistically significant reduction in symptom severity based on MPAI and NBSI total scores (p < .05). There were no significant differences in the SWLS score. Despite the typical limitations of a retrospective chart review, such as variation in treatment procedures, preliminary results reveal a trend towards improved self-reported cognitive and functional symptoms.

The SCEC Community Modeling Environment(SCEC/CME): A Collaboratory for Seismic Hazard Analysis

NASA Astrophysics Data System (ADS)

Maechling, P. J.; Jordan, T. H.; Minster, J. B.; Moore, R.; Kesselman, C.

2005-12-01

The SCEC Community Modeling Environment (SCEC/CME) Project is an NSF-supported Geosciences/IT partnership that is actively developing an advanced information infrastructure for system-level earthquake science in Southern California. This partnership includes SCEC, USC's Information Sciences Institute (ISI), the San Diego Supercomputer Center (SDSC), the Incorporated Institutions for Research in Seismology (IRIS), and the U.S. Geological Survey. The goal of the SCEC/CME is to develop seismological applications and information technology (IT) infrastructure to support the development of Seismic Hazard Analysis (SHA) programs and other geophysical simulations. The SHA application programs developed on the Project include a Probabilistic Seismic Hazard Analysis system called OpenSHA. OpenSHA computational elements that are currently available include a collection of attenuation relationships, and several Earthquake Rupture Forecasts (ERFs). Geophysicists in the collaboration have also developed Anelastic Wave Models (AWMs) using both finite-difference and finite-element approaches. Earthquake simulations using these codes have been run for a variety of earthquake sources. Rupture Dynamic Model (RDM) codes have also been developed that simulate friction-based fault slip. The SCEC/CME collaboration has also developed IT software and hardware infrastructure to support the development, execution, and analysis of these SHA programs. To support computationally expensive simulations, we have constructed a grid-based scientific workflow system. Using the SCEC grid, project collaborators can submit computations from the SCEC/CME servers to High Performance Computers at USC and TeraGrid High Performance Computing Centers. Data generated and archived by the SCEC/CME is stored in a digital library system, the Storage Resource Broker (SRB). This system provides a robust and secure system for maintaining the association between the data seta and their metadata. To provide an easy-to-use system for constructing SHA computations, a browser-based workflow assembly web portal has been developed. Users can compose complex SHA calculations, specifying SCEC/CME data sets as inputs to calculations, and calling SCEC/CME computational programs to process the data and the output. Knowledge-based software tools have been implemented that utilize ontological descriptions of SHA software and data can validate workflows created with this pathway assembly tool. Data visualization software developed by the collaboration supports analysis and validation of data sets. Several programs have been developed to visualize SCEC/CME data including GMT-based map making software for PSHA codes, 4D wavefield propagation visualization software based on OpenGL, and 3D Geowall-based visualization of earthquakes, faults, and seismic wave propagation. The SCEC/CME Project also helps to sponsor the SCEC UseIT Intern program. The UseIT Intern Program provides research opportunities in both Geosciences and Information Technology to undergraduate students in a variety of fields. The UseIT group has developed a 3D data visualization tool, called SCEC-VDO, as a part of this undergraduate research program.

Computer-Guided Deep Brain Stimulation Programming for Parkinson's Disease.

PubMed

Heldman, Dustin A; Pulliam, Christopher L; Urrea Mendoza, Enrique; Gartner, Maureen; Giuffrida, Joseph P; Montgomery, Erwin B; Espay, Alberto J; Revilla, Fredy J

2016-02-01

Pilot study to evaluate computer-guided deep brain stimulation (DBS) programming designed to optimize stimulation settings using objective motion sensor-based motor assessments. Seven subjects (five males; 54-71 years) with Parkinson's disease (PD) and recently implanted DBS systems participated in this pilot study. Within two months of lead implantation, the subject returned to the clinic to undergo computer-guided programming and parameter selection. A motion sensor was placed on the index finger of the more affected hand. Software guided a monopolar survey during which monopolar stimulation on each contact was iteratively increased followed by an automated assessment of tremor and bradykinesia. After completing assessments at each setting, a software algorithm determined stimulation settings designed to minimize symptom severities, side effects, and battery usage. Optimal DBS settings were chosen based on average severity of motor symptoms measured by the motion sensor. Settings chosen by the software algorithm identified a therapeutic window and improved tremor and bradykinesia by an average of 35.7% compared with baseline in the "off" state (p < 0.01). Motion sensor-based computer-guided DBS programming identified stimulation parameters that significantly improved tremor and bradykinesia with minimal clinician involvement. Automated motion sensor-based mapping is worthy of further investigation and may one day serve to extend programming to populations without access to specialized DBS centers. © 2015 International Neuromodulation Society.

Computer program for calculation of complex chemical equilibrium compositions and applications. Part 1: Analysis

NASA Technical Reports Server (NTRS)

Gordon, Sanford; Mcbride, Bonnie J.

1994-01-01

This report presents the latest in a number of versions of chemical equilibrium and applications programs developed at the NASA Lewis Research Center over more than 40 years. These programs have changed over the years to include additional features and improved calculation techniques and to take advantage of constantly improving computer capabilities. The minimization-of-free-energy approach to chemical equilibrium calculations has been used in all versions of the program since 1967. The two principal purposes of this report are presented in two parts. The first purpose, which is accomplished here in part 1, is to present in detail a number of topics of general interest in complex equilibrium calculations. These topics include mathematical analyses and techniques for obtaining chemical equilibrium; formulas for obtaining thermodynamic and transport mixture properties and thermodynamic derivatives; criteria for inclusion of condensed phases; calculations at a triple point; inclusion of ionized species; and various applications, such as constant-pressure or constant-volume combustion, rocket performance based on either a finite- or infinite-chamber-area model, shock wave calculations, and Chapman-Jouguet detonations. The second purpose of this report, to facilitate the use of the computer code, is accomplished in part 2, entitled 'Users Manual and Program Description'. Various aspects of the computer code are discussed, and a number of examples are given to illustrate its versatility.

Flight program language requirements. Volume 2: Requirements and evaluations

NASA Technical Reports Server (NTRS)

1972-01-01

The efforts and results are summarized for a study to establish requirements for a flight programming language for future onboard computer applications. Several different languages were available as potential candidates for future NASA flight programming efforts. The study centered around an evaluation of the four most pertinent existing aerospace languages. Evaluation criteria were established, and selected kernels from the current Saturn 5 and Skylab flight programs were used as benchmark problems for sample coding. An independent review of the language specifications incorporated anticipated future programming requirements into the evaluation. A set of detailed language requirements was synthesized from these activities. The details of program language requirements and of the language evaluations are described.

NASA/Army Rotorcraft Transmission Research, a Review of Recent Significant Accomplishments

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.

1994-01-01

A joint helicopter transmission research program between NASA Lewis Research Center and the U.S. Army Research Lab has existed since 1970. Research goals are to reduce weight and noise while increasing life, reliability, and safety. These research goals are achieved by the NASA/Army Mechanical Systems Technology Branch through both in-house research and cooperative research projects with university and industry partners. Some recent significant technical accomplishments produced by this cooperative research are reviewed. The following research projects are reviewed: oil-off survivability of tapered roller bearings, design and evaluation of high contact ratio gearing, finite element analysis of spiral bevel gears, computer numerical control grinding of spiral bevel gears, gear dynamics code validation, computer program for life and reliability of helicopter transmissions, planetary gear train efficiency study, and the Advanced Rotorcraft Transmission (ART) program.

Sandia QIS Capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muller, Richard P.

2017-07-01

Sandia National Laboratories has developed a broad set of capabilities in quantum information science (QIS), including elements of quantum computing, quantum communications, and quantum sensing. The Sandia QIS program is built atop unique DOE investments at the laboratories, including the MESA microelectronics fabrication facility, the Center for Integrated Nanotechnologies (CINT) facilities (joint with LANL), the Ion Beam Laboratory, and ASC High Performance Computing (HPC) facilities. Sandia has invested $75 M of LDRD funding over 12 years to develop unique, differentiating capabilities that leverage these DOE infrastructure investments.

Computational Materials: Modeling and Simulation of Nanostructured Materials and Systems

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Hinkley, Jeffrey A.

2003-01-01

The paper provides details on the structure and implementation of the Computational Materials program at the NASA Langley Research Center. Examples are given that illustrate the suggested approaches to predicting the behavior and influencing the design of nanostructured materials such as high-performance polymers, composites, and nanotube-reinforced polymers. Primary simulation and measurement methods applicable to multi-scale modeling are outlined. Key challenges including verification and validation of models are highlighted and discussed within the context of NASA's broad mission objectives.

Software Management System

NASA Technical Reports Server (NTRS)

1994-01-01

A software management system, originally developed for Goddard Space Flight Center (GSFC) by Century Computing, Inc. has evolved from a menu and command oriented system to a state-of-the art user interface development system supporting high resolution graphics workstations. Transportable Applications Environment (TAE) was initially distributed through COSMIC and backed by a TAE support office at GSFC. In 1993, Century Computing assumed the support and distribution functions and began marketing TAE Plus, the system's latest version. The software is easy to use and does not require programming experience.

Refining, revising, augmenting, compiling and developing computer assisted instruction K-12 aerospace materials for implementation in NASA spacelink electronic information system

NASA Technical Reports Server (NTRS)

Blake, Jean A.

1988-01-01

The NASA Spacelink is an electronic information service operated by the Marshall Space Flight Center. The Spacelink contains extensive NASA news and educational resources that can be accessed by a computer and modem. Updates and information are provided on: current NASA news; aeronautics; space exploration: before the Shuttle; space exploration: the Shuttle and beyond; NASA installations; NASA educational services; materials for classroom use; and space program spinoffs.

Computational Nanotechnology at NASA Ames Research Center, 1996

NASA Technical Reports Server (NTRS)

Globus, Al; Bailey, David; Langhoff, Steve; Pohorille, Andrew; Levit, Creon; Chancellor, Marisa K. (Technical Monitor)

1996-01-01

Some forms of nanotechnology appear to have enormous potential to improve aerospace and computer systems; computational nanotechnology, the design and simulation of programmable molecular machines, is crucial to progress. NASA Ames Research Center has begun a computational nanotechnology program including in-house work, external research grants, and grants of supercomputer time. Four goals have been established: (1) Simulate a hypothetical programmable molecular machine replicating itself and building other products. (2) Develop molecular manufacturing CAD (computer aided design) software and use it to design molecular manufacturing systems and products of aerospace interest, including computer components. (3) Characterize nanotechnologically accessible materials of aerospace interest. Such materials may have excellent strength and thermal properties. (4) Collaborate with experimentalists. Current in-house activities include: (1) Development of NanoDesign, software to design and simulate a nanotechnology based on functionalized fullerenes. Early work focuses on gears. (2) A design for high density atomically precise memory. (3) Design of nanotechnology systems based on biology. (4) Characterization of diamonoid mechanosynthetic pathways. (5) Studies of the laplacian of the electronic charge density to understand molecular structure and reactivity. (6) Studies of entropic effects during self-assembly. Characterization of properties of matter for clusters up to sizes exhibiting bulk properties. In addition, the NAS (NASA Advanced Supercomputing) supercomputer division sponsored a workshop on computational molecular nanotechnology on March 4-5, 1996 held at NASA Ames Research Center. Finally, collaborations with Bill Goddard at CalTech, Ralph Merkle at Xerox Parc, Don Brenner at NCSU (North Carolina State University), Tom McKendree at Hughes, and Todd Wipke at UCSC are underway.

SCELib2: the new revision of SCELib, the parallel computational library of molecular properties in the single center approach

NASA Astrophysics Data System (ADS)

Sanna, N.; Morelli, G.

2004-09-01

In this paper we present the new version of the SCELib program (CPC Catalogue identifier ADMG) a full numerical implementation of the Single Center Expansion (SCE) method. The physics involved is that of producing the SCE description of molecular electronic densities, of molecular electrostatic potentials and of molecular perturbed potentials due to a point negative or positive charge. This new revision of the program has been optimized to run in serial as well as in parallel execution mode, to support a larger set of molecular symmetries and to permit the restart of long-lasting calculations. To measure the performance of this new release, a comparative study has been carried out on the most powerful computing architectures in serial and parallel runs. The results of the calculations reported in this paper refer to real cases medium to large molecular systems and they are reported in full details to benchmark at best the parallel architectures the new SCELib code will run on. Program summaryTitle of program: SCELib2 Catalogue identifier: ADGU Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADGU Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Reference to previous versions: Comput. Phys. Commun. 128 (2) (2000) 139 (CPC catalogue identifier: ADMG) Does the new version supersede the original program?: Yes Computer for which the program is designed and others on which it has been tested: HP ES45 and rx2600, SUN ES4500, IBM SP and any single CPU workstation based on Alpha, SPARC, POWER, Itanium2 and X86 processors Installations: CASPUR, local Operating systems under which the program has been tested: HP Tru64 V5.X, SUNOS V5.8, IBM AIX V5.X, Linux RedHat V8.0 Programming language used: C Memory required to execute with typical data: 10 Mwords. Up to 2000 Mwords depending on the molecular system and runtime parameters No. of bits in a word: 64 No. of processors used: 1 to 32 Has the code been vectorized or parallelized?: Yes No. of bytes in distributed program, including test data, etc.: 3 798 507 No. of lines in distributed program, including test data, etc.: 187 226 Distribution format: tar.gz Nature of physical problem: In this set of codes an efficient procedure is implemented to describe the wavefunction and related molecular properties of a polyatomic molecular system within the Single Center of Expansion (SCE) approximation. The resulting SCE wavefunction, electron density, electrostatic and exchange/correlation potentials can then be used via a proper Application Programming Interface (API) to describe the target molecular system which can be employed in electron-molecule scattering calculations. The molecular properties expanded over a single center turn out to also be of more general application and some possible uses in quantum chemistry, biomodelling and drug design are also outlined. Method of solution: The polycentre Hartee-Fock solution for a molecule of arbitrary geometry, based on linear combination of Gaussian-Type Orbital (GTO), is expanded over a single center, typically the Center Of Mass (C.O.M.), by means of a Gauss-Legendre/Chebyschev quadrature over the θ, φ angular coordinates. The resulting SCE numerical wavefunction is then used to calculate the one-particle electron density, the electrostatic potential and two different models for the correlation/polarization potentials induced by the impinging electron, which have the correct asymptotic behaviour for the leading dipole molecular polarizabilities. Restrictions on the complexity of the problem: Depending on the molecular system under study and on the operating conditions the program may or may not fit into available RAM memory. In this case a feature of the program is to memory map a disk file in order to efficiently access the memory data through a disk device. Typical running time: The execution time strongly depends on the molecular target description and on the hardware/OS chosen, it is directly proportional to the ( r, θ, φ) grid size and to the number of angular basis functions used. Thus, from the program printout of the main arrays memory occupancy, the user can approximately derive the expected computer time needed for a given calculation executed in serial mode. For parallel executions the overall efficiency must be further taken into account, and this depends on the no. of processors used as well as on the parallel architecture chosen, so a simple general law is at present not determinable. Unusual features of the program: The code has been engineered to use dynamical, runtime determined, global parameters with the aim to have all the data fitted in the RAM memory. Some unusual circumstances, e.g., when using large values of those parameters, may cause the program to run with unexpected performance reductions due to runtime bottlenecks like those caused by memory swap operations which strongly depend on the hardware used. In such cases, a parallel execution of the code is generally sufficient to fix the problem since the data size is partitioned over the available processors. When a suitable parallel system is not available for execution, a mechanism of memory mapped file can be used; with this option on, all the available memory will be used as a buffer for a disk file which contains the whole data set, thus having a better throughput with respect to the traditional swapping/paging of the Unix OS.

Vertical Interaction in Open Software Engineering Communities

DTIC Science & Technology

2009-03-01

Program in CASOS (NSF,DGE-9972762), the Office of Naval Research under Dynamic Network Analysis program (N00014-02-1-0973, the Air Force Office of...W91WAW07C0063) for research in the area of dynamic network analysis. Additional support was provided by CASOS - the center for Computational Analysis of Social...methods across the domain. For a given project, de - velopers can choose from dozens of models, tools, platforms, and languages for specification, design

United States Air Force Graduate Student Research Program for 1990. Program Technical Report. Volume 1

DTIC Science & Technology

1991-06-05

functions on the excavator. 28-6 m0 E Figure 1: Conceptual User Interface for the Rapid Runway Repair (RRR) Remote Control System IV. COMMUNICATION SYSTEM...Vehicle Systems Conference, Dayton, OH. Mariani, D., 1988, "Robotic Vehicle Communications Interoperability," RD& E Center Technical Report, US Army Tank...D.g e : BS Va;,derbilt University Specialty: Computer Engineering Electrical Eng. Dept. Absigned: Arnold Er-gineering Nashville, TN 37240 Developmer

WAMI: A Menu-Driven Computer Program for the Estimation of Weight and Moments of Inertia of Earth-to-Orbit Transports

NASA Technical Reports Server (NTRS)

MacConochie, Ian O.; White, Nancy H.; Mills, Janelle C.

2004-01-01

A program, entitled Weights, Areas, and Mass Properties (or WAMI) is centered around an array of menus that contain constants that can be used in various mass estimating relationships for the ultimate purpose of obtaining the mass properties of Earth-to-Orbit Transports. The current Shuttle mass property data was relied upon heavily for baseline equation constant values from which other options were derived.

NASA Aerosciences Activities to Support Human Space Flight

NASA Technical Reports Server (NTRS)

LeBeau, Gerald J.

2011-01-01

The Lyndon B. Johnson Space Center (JSC) has been a critical element of the United State's human space flight program for over 50 years. It is the home to NASA s Mission Control Center, the astronaut corps, and many major programs and projects including the Space Shuttle Program, International Space Station Program, and the Orion Project. As part of JSC's Engineering Directorate, the Applied Aeroscience and Computational Fluid Dynamics Branch is charted to provide aerosciences support to all human spacecraft designs and missions for all phases of flight, including ascent, exo-atmospheric, and entry. The presentation will review past and current aeroscience applications and how NASA works to apply a balanced philosophy that leverages ground testing, computational modeling and simulation, and flight testing, to develop and validate related products. The speaker will address associated aspects of aerodynamics, aerothermodynamics, rarefied gas dynamics, and decelerator systems, involving both spacecraft vehicle design and analysis, and operational mission support. From these examples some of NASA leading aerosciences challenges will be identified. These challenges will be used to provide foundational motivation for the development of specific advanced modeling and simulation capabilities, and will also be used to highlight how development activities are increasing becoming more aligned with flight projects. NASA s efforts to apply principles of innovation and inclusion towards improving its ability to support the myriad of vehicle design and operational challenges will also be briefly reviewed.

An Overview: NASA LeRC Structures Programs

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

1998-01-01

A workshop on National Structures Programs was held, jointly sponsored by the AIAA Structures Technical Committee, the University of Virginia's Center for Advanced Computational Technology and NASA. The Objectives of the Workshop were to: provide a forum for discussion of current Government-sponsored programs in the structures area; identify high potential research areas for future aerospace systems; and initiate suitable interaction mechanisms with the managers of structures programs. The presentations covered structures programs at NASA, DOD (AFOSR, ONR, ARO and DARPA), and DOE. This publication is the presentation of the Structures and Acoustics Division of the NASA Lewis Research Center. The Structures and Acoustics Division has its genesis dating back to 1943. It is responsible for NASA research related to rotating structures and structural hot sections of both airbreathing and rocket engines. The work of the division encompasses but is not limited to aeroelasticity, structural life prediction and reliability, fatigue and fracture, mechanical components such as bearings, gears, and seals, and aeroacoustics. These programs are discussed and the names of responsible individuals are provided for future reference.

Assessment of MSFC's supervisory training programs and courses. [marshall space flight center

NASA Technical Reports Server (NTRS)

Brindley, T. A.

1982-01-01

Courses and special programs to train supervisors at Marshall Space Flight Center (MSFC) were to determine the adequacy of the present MSFC Supervisory Training Program and to recommend changes, if appropriate. The content, procedures, and student evaluations of the required Office of Personnel Management (OPM) 80 hours training for supervisors, the optional 120 hours, the MSFC Management Development Program (MDP), NASA's Management Education Program (MEP), various OPM and special contract programs, pertinent procedural guidelines, regulations, and letters, as well as various MSFC computer reports which indicate who took what training were analyzed. Various interviews with MSFC personnel involved in training are included. Recommendations consist of: (1) the choice of courses selected for the basic required OPM 80 hours be improved; (2) the optional 120 hours be discontinued and a shorter module be developed dealing with managerial decision making and human relations skills; (3) the MDP and MEP be continued as at present; and (4) that a broad array of developmental strategies be incorporated to provide a variety of opportunities for supervisory improvement.

An Interactive Software for Conceptual Wing Flutter Analysis and Parametric Study

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1996-01-01

An interactive computer program was developed for wing flutter analysis in the conceptual design stage. The objective was to estimate the flutter instability boundary of a flexible cantilever wing, when well-defined structural and aerodynamic data are not available, and then study the effect of change in Mach number, dynamic pressure, torsional frequency, sweep, mass ratio, aspect ratio, taper ratio, center of gravity, and pitch inertia, to guide the development of the concept. The software was developed for Macintosh or IBM compatible personal computers, on MathCad application software with integrated documentation, graphics, data base and symbolic mathematics. The analysis method was based on non-dimensional parametric plots of two primary flutter parameters, namely Regier number and Flutter number, with normalization factors based on torsional stiffness, sweep, mass ratio, taper ratio, aspect ratio, center of gravity location and pitch inertia radius of gyration. The parametric plots were compiled in a Vought Corporation report from a vast data base of past experiments and wind-tunnel tests. The computer program was utilized for flutter analysis of the outer wing of a Blended-Wing-Body concept, proposed by McDonnell Douglas Corp. Using a set of assumed data, preliminary flutter boundary and flutter dynamic pressure variation with altitude, Mach number and torsional stiffness were determined.

NASA LeRC/Akron University Graduate Cooperative Fellowship Program and Graduate Student Researchers Program

NASA Technical Reports Server (NTRS)

Fertis, D. G.

1983-01-01

On June 1, 1980, the University of Akron and the NASA Lewis Research Center (LERC) established a Graduate Cooperative Fellowship Program in the specialized areas of Engine Structural Analysis and Dynamics, Computational Mechanics, Mechanics of Composite Materials, and Structural Optimization, in order to promote and develop requisite technologies in these areas of engine technology. The objectives of this program are consistent with those of the NASA Engine Structure Program in which graduate students of the University of Akron participate by conducting research at Lewis. This report is the second on this grant and summarizes the second and third year research effort, which includes the participation of five graduate students where each student selects one of the above areas as his special field of interest. Each student is required to spend 30 percent of his educational training time at the NASA Lewis Research Center and the balance at the University of Akron. His course work is judiciously selected and tailored to prepare him for research work in his field of interest. A research topic is selected for each student while in residence at the NASA Lewis Research Center, which is also approved by the faculty of the University of Akron as his thesis topic for a Master's and/or a Ph.D. degree.

Oklahoma Center for High Energy Physics (OCHEP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nandi, S; Strauss, M J; Snow, J

2012-02-29

The DOE EPSCoR implementation grant, with the support from the State of Oklahoma and from the three universities, Oklahoma State University, University of Oklahoma and Langston University, resulted in establishing of the Oklahoma Center for High Energy Physics (OCHEP) in 2004. Currently, OCHEP continues to flourish as a vibrant hub for research in experimental and theoretical particle physics and an educational center in the State of Oklahoma. All goals of the original proposal were successfully accomplished. These include foun- dation of a new experimental particle physics group at OSU, the establishment of a Tier 2 computing facility for the Largemore » Hadron Collider (LHC) and Tevatron data analysis at OU and organization of a vital particle physics research center in Oklahoma based on resources of the three universities. OSU has hired two tenure-track faculty members with initial support from the grant funds. Now both positions are supported through OSU budget. This new HEP Experimental Group at OSU has established itself as a full member of the Fermilab D0 Collaboration and LHC ATLAS Experiment and has secured external funds from the DOE and the NSF. These funds currently support 2 graduate students, 1 postdoctoral fellow, and 1 part-time engineer. The grant initiated creation of a Tier 2 computing facility at OU as part of the Southwest Tier 2 facility, and a permanent Research Scientist was hired at OU to maintain and run the facility. Permanent support for this position has now been provided through the OU university budget. OCHEP represents a successful model of cooperation of several universities, providing the establishment of critical mass of manpower, computing and hardware resources. This led to increasing Oklahoma's impact in all areas of HEP, theory, experiment, and computation. The Center personnel are involved in cutting edge research in experimental, theoretical, and computational aspects of High Energy Physics with the research areas ranging from the search for new phenomena at the Fermilab Tevatron and the CERN Large Hadron Collider to theoretical modeling, computer simulation, detector development and testing, and physics analysis. OCHEP faculty members participating on the D0 collaboration at the Fermilab Tevatron and on the ATLAS collaboration at the CERN LHC have made major impact on the Standard Model (SM) Higgs boson search, top quark studies, B physics studies, and measurements of Quantum Chromodynamics (QCD) phenomena. The OCHEP Grid computing facility consists of a large computer cluster which is playing a major role in data analysis and Monte Carlo productions for both the D0 and ATLAS experiments. Theoretical efforts are devoted to new ideas in Higgs bosons physics, extra dimensions, neutrino masses and oscillations, Grand Unified Theories, supersymmetric models, dark matter, and nonperturbative quantum field theory. Theory members are making major contributions to the understanding of phenomena being explored at the Tevatron and the LHC. They have proposed new models for Higgs bosons, and have suggested new signals for extra dimensions, and for the search of supersymmetric particles. During the seven year period when OCHEP was partially funded through the DOE EPSCoR implementation grant, OCHEP members published over 500 refereed journal articles and made over 200 invited presentations at major conferences. The Center is also involved in education and outreach activities by offering summer research programs for high school teachers and college students, and organizing summer workshops for high school teachers, sometimes coordinating with the Quarknet programs at OSU and OU. The details of the Center can be found in http://ochep.phy.okstate.edu.« less

Space technology test facilities at the NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Gross, Anthony R.; Rodrigues, Annette T.

1990-01-01

The major space research and technology test facilities at the NASA Ames Research Center are divided into five categories: General Purpose, Life Support, Computer-Based Simulation, High Energy, and the Space Exploraton Test Facilities. The paper discusses selected facilities within each of the five categories and discusses some of the major programs in which these facilities have been involved. Special attention is given to the 20-G Man-Rated Centrifuge, the Human Research Facility, the Plant Crop Growth Facility, the Numerical Aerodynamic Simulation Facility, the Arc-Jet Complex and Hypersonic Test Facility, the Infrared Detector and Cryogenic Test Facility, and the Mars Wind Tunnel. Each facility is described along with its objectives, test parameter ranges, and major current programs and applications.

Science at the Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

White, Nicholas E.

2012-01-01

The Sciences and Exploration Directorate of the NASA Goddard Space Flight Center (GSFC) is the largest Earth and space science research organization in the world. Its scientists advance understanding of the Earth and its life-sustaining environment, the Sun, the solar system, and the wider universe beyond. Researchers in the Sciences and Exploration Directorate work with engineers, computer programmers, technologists, and other team members to develop the cutting-edge technology needed for space-based research. Instruments are also deployed on aircraft, balloons, and Earth's surface. I will give an overview of the current research activities and programs at GSFC including the James Web Space Telescope (JWST), future Earth Observing programs, experiments that are exploring our solar system and studying the interaction of the Sun with the Earth's magnetosphere.

Methodological, technical, and ethical issues of a computerized data system.

PubMed

Rice, C A; Godkin, M A; Catlin, R J

1980-06-01

This report examines some methodological, technical, and ethical issues which need to be addressed in designing and implementing a valid and reliable computerized clinical data base. The report focuses on the data collection system used by four residency based family health centers, affiliated with the University of Massachusetts Medical Center. It is suggested that data reliability and validity can be maximized by: (1) standardizing encounter forms at affiliated health centers to eliminate recording biases and ensure data comparability; (2) using forms with a diagnosis checklist to reduce coding errors and increase the number of diagnoses recorded per encounter; (3) developing uniform diagnostic criteria; (4) identifying sources of error, including discrepancies of clinical data as recorded in medical records, encounter forms, and the computer; and (5) improving provider cooperation in recording data by distributing data summaries which reinforce the data's applicability to service provision. Potential applications of the data for research purposes are restricted by personnel and computer costs, confidentiality considerations, programming related issues, and, most importantly, health center priorities, largely focused on patient care, not research.

External Data and Attribute Hyperlink Programs for Promis*e(Registered Trademark)

NASA Technical Reports Server (NTRS)

Derengowski, Rich; Gruel, Andrew

2001-01-01

External Data and Attribute Hyperlink are computer programs that can be added to Promis*e(trademark) which is a commercial software system that automates routine tasks in the design (including drawing schematic diagrams) of electrical control systems. The programs were developed under the Stennis Space Center's (SSC) Dual Use Technology Development Program to provide capabilities for SSC's BMCS configuration management system which uses Promis*e(trademark). The External Data program enables the storage and management of information in an external database linked to a drawing. Changes can be made either in the database or on the drawing. Information that originates outside Promis*e(trademark) can be stored in custom fields that can be added to the database. Although this information is not available in Promis*e(trademark) printed drawings, it can be associated with symbols in the drawings, and can be retrieved through the drawings when the software is running. The Attribute Hyperlink program enables the addition of hyperlink information as attributes of symbols. This program enables the formation of a direct hyperlink between a schematic diagram and an Internet site or a file on a compact disk, on the user's hard drive, or on another computer on a network to which the user's computer is connected. The user can then obtain information directly related to the part (e.g., maintenance, or troubleshooting information) associated with the hyperlink.

Medical education as a science: the quality of evidence for computer-assisted instruction.

PubMed

Letterie, Gerard S

2003-03-01

A marked increase in the number of computer programs for computer-assisted instruction in the medical sciences has occurred over the past 10 years. The quality of both the programs and the literature that describe these programs has varied considerably. The purposes of this study were to evaluate the published literature that described computer-assisted instruction in medical education and to assess the quality of evidence for its implementation, with particular emphasis on obstetrics and gynecology. Reports published between 1988 and 2000 on computer-assisted instruction in medical education were identified through a search of MEDLINE and Educational Resource Identification Center and a review of the bibliographies of the articles that were identified. Studies were selected if they included a description of computer-assisted instruction in medical education, regardless of the type of computer program. Data were extracted with a content analysis of 210 reports. The reports were categorized according to study design (comparative, prospective, descriptive, review, or editorial), type of computer-assisted instruction, medical specialty, and measures of effectiveness. Computer-assisted instruction programs included online technologies, CD-ROMs, video laser disks, multimedia work stations, virtual reality, and simulation testing. Studies were identified in all medical specialties, with a preponderance in internal medicine, general surgery, radiology, obstetrics and gynecology, pediatrics, and pathology. Ninety-six percent of the articles described a favorable impact of computer-assisted instruction in medical education, regardless of the quality of the evidence. Of the 210 reports that were identified, 60% were noncomparative, descriptive reports of new techniques in computer-assisted instruction, and 15% and 14% were reviews and editorials, respectively, of existing technology. Eleven percent of studies were comparative and included some form of assessment of the effectiveness of the computer program. These assessments included pre- and posttesting and questionnaires to score program quality, perceptions of the medical students and/or residents regarding the program, and impact on learning. In one half of these comparative studies, computer-assisted instruction was compared with traditional modes of teaching, such as text and lectures. Six studies compared performance before and after the computer-assisted instruction. Improvements were shown in 5 of the studies. In the remainder of the studies, computer-assisted instruction appeared to result in similar test performance. Despite study design or outcome, most articles described enthusiastic endorsement of the programs by the participants, including medical students, residents, and practicing physicians. Only 1 study included cost analysis. Thirteen of the articles were in obstetrics and gynecology. Computer-assisted instruction has assumed to have an increasing role in medical education. In spite of enthusiastic endorsement and continued improvements in software, few studies of good design clearly demonstrate improvement in medical education over traditional modalities. There are no comparative studies in obstetrics and gynecology that demonstrate a clear-cut advantage. Future studies of computer-assisted instruction that include comparisons and cost assessments to gauge their effectiveness over traditional methods may better define their precise role.

An Emerging Technology Curriculum. Education for Technology Employment Project. Final Report.

ERIC Educational Resources Information Center

Harms, Dan; And Others

Individualized, competency-based curriculum materials were developed for a course on Principles of Technology, Units 1-6. New and updated curriculum materials in Drafting and Electronics and the Principles of Technology units were pilot tested in area vocational center settings in Illinois. A computer maintenance program was also developed but not…

Curriculum and Resources: Computer Provision in a CTC.

ERIC Educational Resources Information Center

Denholm, Lawrence

The program for City Technical Colleges (CTCs) draws on ideas and resources from government, private industry, and education to focus on the educational needs of inner city and urban children. Mathematics, science, and technology are at the center of the CTCs' mission, in a context which includes economic awareness and a commitment to enterprise…

Management Tools for the 80's.

ERIC Educational Resources Information Center

Seivert, Dick; Thomas, Frank B.

Two functions necessary for managing a computer center (organizing and controlling) are discussed with a focus on a nomenclature that was found to be useful for identifying parts of a system and was compatible with the definitions of most operational systems. For example, it is necessary to identify files, reports, and programs used in daily…

NASA Langley scientific and technical information output: 1994, volume 1

NASA Technical Reports Server (NTRS)

Phillips, Marilou S. (Compiler); Stewart, Susan H. (Compiler)

1995-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1994. Included are citations for Formal Reports, High-Numbered Conference Publications, High-Numbered Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Computer Programs, Tech Briefs, and Patents.

NASA Langley Scientific and Technical Information Output: 1994. Volume 1

NASA Technical Reports Server (NTRS)

Phillips, Marilou S. (Compiler); Stewart, Susan H. (Compiler)

1995-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1994. Included are citations for Formal Reports, High-Numbered Conference Publications, High-Numbered Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Computer Programs, Tech Briefs, and Patents.

Students' Attitudes in a Graduate Statistics Class.

ERIC Educational Resources Information Center

Kennedy, Robert L.; Broadston, Pamela M.

This study investigated the attitudes toward statistics of graduate students who used a computer program as part of the instructional effort, which allowed for an individualized, self-paced, student-centered activity-based course. The 9 sections involved in the study were offered in 2001 through 2003, and there were 75 participants for whom there…

Microcomputer Usage in Secondary Marketing Education. A National Study.

ERIC Educational Resources Information Center

Searle, A. Gary

A study was conducted to determine microcomputer hardware, software, and inservice components of secondary marketing education programs. A questionnaire was developed and sent to 420 teacher-coordinators in 42 states. A total of 225 (54 percent) usable returns were tabulated at the University of Wisconsin-Stout Computer Center. Results of the…

Customized On-site Resource Training Services (CORTS): A Partnership Program.

ERIC Educational Resources Information Center

Macquarie Univ., North Ryde (Australia). Special Education Centre.

In 1983, New Brunswick Community College-Moncton (NBCCM) was awarded funding to establish a Computer Aided Drafting/Manufacturing (CAD/CAM) resource center to train students and assist industry in researching and adopting CAD/CAM technology. However, inherent constraints in industry and the absorption of college resources by in-house training…

Chicks in Charge: Andrea Baker & Amy Daniels--Airport High School Media Center, Columbia, SC

ERIC Educational Resources Information Center

Library Journal, 2004

2004-01-01

This article briefly discusses two librarians exploration of Linux. Andrea Baker and Amy Daniels were tired of telling their students that new technology items were not in the budget. They explored Linux, which is a program that recycles older computers, installs free operating systems and free software.

Exploring the Past. "A Senior Literacy Model." Final Report.

ERIC Educational Resources Information Center

Greater Erie Community Action Committee, PA.

A program of basic language/writing skills was designed to enhance the literacy levels of 24 multicultural seniors, aged 65 or older, who were recruited from senior centers throughout Erie County, Pennsylvania. Computer literacy and basic word processing skills were taught along with basic language/writing skills in a nonthreatening learning…

NASIC at MIT. Final Report, 1 March 1974 through 28 February 1975.

ERIC Educational Resources Information Center

Benenfeld, Alan R.; And Others

Computer-based reference search services were provided to users on a fee-for-service basis at the Massachusetts Institute of Technology as the first, and experimental, note in the development of the Northeast Academic Science Information Center (NASIC). Development of a training program for information specialists and training materials is…

Profiling Developmental Toxicity of 387 Environmental Chemicals using EPA’s Toxicity Reference Database (ToxRefDB)

EPA Science Inventory

EPA's Toxicity Reference Databases (ToxRefDB) was developed by the National Center for Computational Toxicology in partnership with EPA's Office of Pesticide Programs, to store data derived from in vivo animal toxicity studies [www.epa.gov/ncct/toxrefdb/]. The initial build of To...

ICLIS: A Model for Extending Knowledge to Residents in Rural Communities. A Planning Workbook.

ERIC Educational Resources Information Center

Utah State Univ., Logan.

The Intermountain Community Learning and Information Services (ICLIS) project was begun in 1985 to provide rural communities in Colorado, Montana, Utah, and Wyoming with greater access to information and educational programming. Computer centers were housed in nine rural public libraries to provide services related to literacy, career guidance,…

Beginning with the Learner: Strategies To Individualize Adult Literacy Programs.

ERIC Educational Resources Information Center

Shepherd, R.

The basis for all computer-assisted instruction at the Continuing Education Learning Center at Jackson State University is the instructional techniques necessary for the success of at-risk adult learners who find traditional methods inadequate. Each learner is pretested for reading level for placement, and skill assessments are made to diagnose…

New Chemical/Biological Profiling and Informatics Approaches for Exploring Mutagenicity & Carcinogenicity: Updates of EPA ToxCast and Tox21 Programs

EPA Science Inventory

EPA’s National Center for Computational Toxicology is building capabilities to support a new paradigm for toxicity screening and prediction through harnessing of legacy toxicity data, creation of data linkages, and generation of new in vitro screening data. In association with EP...

Media Literacy: The School Library Media Center's New Curriculum Baby.

ERIC Educational Resources Information Center

Robinson, Julia

1994-01-01

Defines seven key concepts of media literacy education. Discusses reading visual media as well as print media and computer programs; determining values and ethics; decoding or deconstructing; critical thinking; the promotion of media literacy by interest groups; and educational restructuring with the role of the school library media specialist as…

NASA Langley Scientific and Technical Information Output: 1996

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler); Phillips, Marilou S. (Compiler)

1997-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1996. Included are citations for Formal Reports, High-Numbered Conference Publications, High-Numbered Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.

Close-Call Action Log Form

NASA Technical Reports Server (NTRS)

Spuler, Linda M.; Ford, Patricia K.; Skeete, Darren C.; Hershman, Scot; Raviprakash, Pushpa; Arnold, John W.; Tran, Victor; Haenze, Mary Alice

2005-01-01

"Close Call Action Log Form" ("CCALF") is the name of both a computer program and a Web-based service provided by the program for creating an enhanced database of close calls (in the colloquial sense of mishaps that were avoided by small margins) assigned to the Center Operations Directorate (COD) at Johnson Space Center. CCALF provides a single facility for on-line collaborative review of close calls. Through CCALF, managers can delegate responses to employees. CCALF utilizes a pre-existing e-mail system to notify managers that there are close calls to review, but eliminates the need for the prior practices of passing multiple e-mail messages around the COD, then collecting and consolidating them into final responses: CCALF now collects comments from all responders for incorporation into reports that it generates. Also, whereas it was previously necessary to manually calculate metrics (e.g., numbers of maintenance-work orders necessitated by close calls) for inclusion in the reports, CCALF now computes the metrics, summarizes them, and displays them in graphical form. The reports and all pertinent information used to generate the reports are logged, tracked, and retained by CCALF for historical purposes.

The Russian effort in establishing large atomic and molecular databases

NASA Astrophysics Data System (ADS)

Presnyakov, Leonid P.

1998-07-01

The database activities in Russia have been developed in connection with UV and soft X-ray spectroscopic studies of extraterrestrial and laboratory (magnetically confined and laser-produced) plasmas. Two forms of database production are used: i) a set of computer programs to calculate radiative and collisional data for the general atom or ion, and ii) development of numeric database systems with the data stored in the computer. The first form is preferable for collisional data. At the Lebedev Physical Institute, an appropriate set of the codes has been developed. It includes all electronic processes at collision energies from the threshold up to the relativistic limit. The ion -atom (and -ion) collisional data are calculated with the methods developed recently. The program for the calculations of the level populations and line intensities is used for spectrical diagnostics of transparent plasmas. The second form of database production is widely used at the Institute of Physico-Technical Measurements (VNIIFTRI), and the Troitsk Center: the Institute of Spectroscopy and TRINITI. The main results obtained at the centers above are reviewed. Plans for future developments jointly with international collaborations are discussed.

Accelerating Science with the NERSC Burst Buffer Early User Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhimji, Wahid; Bard, Debbie; Romanus, Melissa

NVRAM-based Burst Buffers are an important part of the emerging HPC storage landscape. The National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory recently installed one of the first Burst Buffer systems as part of its new Cori supercomputer, collaborating with Cray on the development of the DataWarp software. NERSC has a diverse user base comprised of over 6500 users in 700 different projects spanning a wide variety of scientific computing applications. The use-cases of the Burst Buffer at NERSC are therefore also considerable and diverse. We describe here performance measurements and lessons learned from the Burstmore » Buffer Early User Program at NERSC, which selected a number of research projects to gain early access to the Burst Buffer and exercise its capability to enable new scientific advancements. To the best of our knowledge this is the first time a Burst Buffer has been stressed at scale by diverse, real user workloads and therefore these lessons will be of considerable benefit to shaping the developing use of Burst Buffers at HPC centers.« less

Turbine Blade and Endwall Heat Transfer Measured in NASA Glenn's Transonic Turbine Blade Cascade

NASA Technical Reports Server (NTRS)

Giel, Paul W.

2000-01-01

Higher operating temperatures increase the efficiency of aircraft gas turbine engines, but can also degrade internal components. High-pressure turbine blades just downstream of the combustor are particularly susceptible to overheating. Computational fluid dynamics (CFD) computer programs can predict the flow around the blades so that potential hot spots can be identified and appropriate cooling schemes can be designed. Various blade and cooling schemes can be examined computationally before any hardware is built, thus saving time and effort. Often though, the accuracy of these programs has been found to be inadequate for predicting heat transfer. Code and model developers need highly detailed aerodynamic and heat transfer data to validate and improve their analyses. The Transonic Turbine Blade Cascade was built at the NASA Glenn Research Center at Lewis Field to help satisfy the need for this type of data.

Interactive information processing for NASA's mesoscale analysis and space sensor program

NASA Technical Reports Server (NTRS)

Parker, K. G.; Maclean, L.; Reavis, N.; Wilson, G.; Hickey, J. S.; Dickerson, M.; Karitani, S.; Keller, D.

1985-01-01

The Atmospheric Sciences Division (ASD) of the Systems Dynamics Laboratory at NASA's Marshall Space Flight Center (MSFC) is currently involved in interactive information processing for the Mesoscale Analysis and Space Sensor (MASS) program. Specifically, the ASD is engaged in the development and implementation of new space-borne remote sensing technology to observe and measure mesoscale atmospheric processes. These space measurements and conventional observational data are being processed together to gain an improved understanding of the mesoscale structure and the dynamical evolution of the atmosphere relative to cloud development and precipitation processes. To satisfy its vast data processing requirements, the ASD has developed a Researcher Computer System consiting of three primary computer systems which provides over 20 scientists with a wide range of capabilities for processing and displaying a large volumes of remote sensing data. Each of the computers performs a specific function according to its unique capabilities.

HSTRESS: A computer program to calculate the height of a hydraulic fracture in a multi-layered stress medium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warpinski, N.R.

A computer code for calculating hydraulic fracture height and width in a stressed-layer medium has been modified for easy use on a personal computer. HSTRESS allows for up to 51 layers having different thicknesses, stresses and fracture toughnesses. The code can calculate fracture height versus pressure or pressure versus fracture height, depending on the design model in which the data will be used. At any pressure/height, a width profile is calculated and an equivalent width factor and flow resistance factor are determined. This program is written in FORTRAN. Graphics use PLOT88 software by Plotworks, Inc., but the graphics software mustmore » be obtained by the user because of licensing restrictions. A version without graphics can also be run. This code is available through the National Energy Software Center (NESC), operated by Argonne National Laboratory. 14 refs., 21 figs.« less

Sign: large-scale gene network estimation environment for high performance computing.

PubMed

Tamada, Yoshinori; Shimamura, Teppei; Yamaguchi, Rui; Imoto, Seiya; Nagasaki, Masao; Miyano, Satoru

2011-01-01

Our research group is currently developing software for estimating large-scale gene networks from gene expression data. The software, called SiGN, is specifically designed for the Japanese flagship supercomputer "K computer" which is planned to achieve 10 petaflops in 2012, and other high performance computing environments including Human Genome Center (HGC) supercomputer system. SiGN is a collection of gene network estimation software with three different sub-programs: SiGN-BN, SiGN-SSM and SiGN-L1. In these three programs, five different models are available: static and dynamic nonparametric Bayesian networks, state space models, graphical Gaussian models, and vector autoregressive models. All these models require a huge amount of computational resources for estimating large-scale gene networks and therefore are designed to be able to exploit the speed of 10 petaflops. The software will be available freely for "K computer" and HGC supercomputer system users. The estimated networks can be viewed and analyzed by Cell Illustrator Online and SBiP (Systems Biology integrative Pipeline). The software project web site is available at http://sign.hgc.jp/ .