Sample records for centered maintenance model

  1. Automated System Checkout to Support Predictive Maintenance for the Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Patterson-Hine, Ann; Deb, Somnath; Kulkarni, Deepak; Wang, Yao; Lau, Sonie (Technical Monitor)

    1998-01-01

    The Propulsion Checkout and Control System (PCCS) is a predictive maintenance software system. The real-time checkout procedures and diagnostics are designed to detect components that need maintenance based on their condition, rather than using more conventional approaches such as scheduled or reliability centered maintenance. Predictive maintenance can reduce turn-around time and cost and increase safety as compared to conventional maintenance approaches. Real-time sensor validation, limit checking, statistical anomaly detection, and failure prediction based on simulation models are employed. Multi-signal models, useful for testability analysis during system design, are used during the operational phase to detect and isolate degraded or failed components. The TEAMS-RT real-time diagnostic engine was developed to utilize the multi-signal models by Qualtech Systems, Inc. Capability of predicting the maintenance condition was successfully demonstrated with a variety of data, from simulation to actual operation on the Integrated Propulsion Technology Demonstrator (IPTD) at Marshall Space Flight Center (MSFC). Playback of IPTD valve actuations for feature recognition updates identified an otherwise undetectable Main Propulsion System 12 inch prevalve degradation. The algorithms were loaded into the Propulsion Checkout and Control System for further development and are the first known application of predictive Integrated Vehicle Health Management to an operational cryogenic testbed. The software performed successfully in real-time, meeting the required performance goal of 1 second cycle time.

  2. Quantified Risk Ranking Model for Condition-Based Risk and Reliability Centered Maintenance

    NASA Astrophysics Data System (ADS)

    Chattopadhyaya, Pradip Kumar; Basu, Sushil Kumar; Majumdar, Manik Chandra

    2017-06-01

    In the recent past, risk and reliability centered maintenance (RRCM) framework is introduced with a shift in the methodological focus from reliability and probabilities (expected values) to reliability, uncertainty and risk. In this paper authors explain a novel methodology for risk quantification and ranking the critical items for prioritizing the maintenance actions on the basis of condition-based risk and reliability centered maintenance (CBRRCM). The critical items are identified through criticality analysis of RPN values of items of a system and the maintenance significant precipitating factors (MSPF) of items are evaluated. The criticality of risk is assessed using three risk coefficients. The likelihood risk coefficient treats the probability as a fuzzy number. The abstract risk coefficient deduces risk influenced by uncertainty, sensitivity besides other factors. The third risk coefficient is called hazardous risk coefficient, which is due to anticipated hazards which may occur in the future and the risk is deduced from criteria of consequences on safety, environment, maintenance and economic risks with corresponding cost for consequences. The characteristic values of all the three risk coefficients are obtained with a particular test. With few more tests on the system, the values may change significantly within controlling range of each coefficient, hence `random number simulation' is resorted to obtain one distinctive value for each coefficient. The risk coefficients are statistically added to obtain final risk coefficient of each critical item and then the final rankings of critical items are estimated. The prioritization in ranking of critical items using the developed mathematical model for risk assessment shall be useful in optimization of financial losses and timing of maintenance actions.

  3. Troubleshooting Complex Equipment in the Military Services: Research and Prospects.

    DTIC Science & Technology

    1979-12-01

    the maintenance concept for a given prime * ,equipeent. The concept defines levels of maintenance, the arrangements for support by mobile and depot...Naval Training Bquipment Center, 1975. Ross, S. AUmlied probability models with otimization aplications . San Francisco: Holden-Day, 1970. use, W.B. Human

  4. Understanding and Predicting the Process of Software Maintenance Releases

    NASA Technical Reports Server (NTRS)

    Basili, Victor; Briand, Lionel; Condon, Steven; Kim, Yong-Mi; Melo, Walcelio L.; Valett, Jon D.

    1996-01-01

    One of the major concerns of any maintenance organization is to understand and estimate the cost of maintenance releases of software systems. Planning the next release so as to maximize the increase in functionality and the improvement in quality are vital to successful maintenance management. The objective of this paper is to present the results of a case study in which an incremental approach was used to better understand the effort distribution of releases and build a predictive effort model for software maintenance releases. This study was conducted in the Flight Dynamics Division (FDD) of NASA Goddard Space Flight Center(GSFC). This paper presents three main results: 1) a predictive effort model developed for the FDD's software maintenance release process; 2) measurement-based lessons learned about the maintenance process in the FDD; and 3) a set of lessons learned about the establishment of a measurement-based software maintenance improvement program. In addition, this study provides insights and guidelines for obtaining similar results in other maintenance organizations.

  5. 20 CFR 638.306 - Protection and maintenance of contract center facilities owned or leased by Job Corps.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Protection and maintenance of contract center... Funding, Site Selection, and Facilities Management § 638.306 Protection and maintenance of contract center... and maintenance of contract center facilities owned or leased by Job Corps which shall be consistent...

  6. Beyond reliability to profitability

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bond, T.H.; Mitchell, J.S.

    1996-07-01

    Reliability concerns have controlled much of power generation design and operations. Emerging from a strictly regulated environment, profitability is becoming a much more important concept for today`s power generation executives. This paper discusses the conceptual advance-view power plant maintenance as a profit center, go beyond reliability, and embrace profitability. Profit Centered Maintenance begins with the premise that financial considerations, namely profitability, drive most aspects of modern process and manufacturing operations. Profit Centered Maintenance is a continuous process of reliability and administrative improvement and optimization. For the power generation executives with troublesome maintenance programs, Profit Centered Maintenance can be the blueprintmore » to increased profitability. It requires the culture change to make decisions based on value, to reengineer the administration of maintenance, and to enable the people performing and administering maintenance to make the most of available maintenance information technology. The key steps are to optimize the physical function of maintenance and to resolve recurring maintenance problems so that the need for maintenance can be reduced. Profit Centered Maintenance is more than just an attitude it is a path to profitability, be it resulting in increased profits or increased market share.« less

  7. Environmental Learning Centers: A Template.

    ERIC Educational Resources Information Center

    Vozick, Eric

    1999-01-01

    Provides a working model, or template, for community-based environmental learning centers (ELCs). The template presents a philosophy as well as a plan for staff and administration operations, educational programming, and financial support. The template also addresses "green" construction and maintenance of buildings and grounds and…

  8. Reliability and Maintainability model (RAM) user and maintenance manual. Part 2

    NASA Technical Reports Server (NTRS)

    Ebeling, Charles E.

    1995-01-01

    This report documents the procedures for utilizing and maintaining the Reliability and Maintainability Model (RAM) developed by the University of Dayton for the NASA Langley Research Center (LaRC). The RAM model predicts reliability and maintainability (R&M) parameters for conceptual space vehicles using parametric relationships between vehicle design and performance characteristics and subsystem mean time between maintenance actions (MTBM) and manhours per maintenance action (MH/MA). These parametric relationships were developed using aircraft R&M data from over thirty different military aircraft of all types. This report describes the general methodology used within the model, the execution and computational sequence, the input screens and data, the output displays and reports, and study analyses and procedures. A source listing is provided.

  9. Alternative Fuels Data Center: Ryder Opens Natural Gas Vehicle Maintenance

    Science.gov Websites

    Facility Ryder Opens Natural Gas Vehicle Maintenance Facility to someone by E-mail Share Alternative Fuels Data Center: Ryder Opens Natural Gas Vehicle Maintenance Facility on Facebook Tweet about Alternative Fuels Data Center: Ryder Opens Natural Gas Vehicle Maintenance Facility on Twitter Bookmark

  10. Implementing a Reliability Centered Maintenance Program at NASA's Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Tuttle, Raymond E.; Pete, Robert R.

    1998-01-01

    Maintenance practices have long focused on time based "preventive maintenance" techniques. Components were changed out and parts replaced based on how long they had been in place instead of what condition they were in. A reliability centered maintenance (RCM) program seeks to offer equal or greater reliability at decreased cost by insuring only applicable, effective maintenance is performed and by in large part replacing time based maintenance with condition based maintenance. A significant portion of this program involved introducing non-intrusive technologies, such as vibration analysis, oil analysis and I/R cameras, to an existing labor force and management team.

  11. Alternative Fuels Data Center: Maintenance and Safety of Hybrid and Plug-In

    Science.gov Websites

    Electric Vehicles Maintenance and Safety of Hybrid and Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Maintenance and Safety of Hybrid and Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Maintenance and Safety of Hybrid and Plug

  12. The Application of the Human Engineering Modeling and Performance Laboratory for Space Vehicle Ground Processing Tasks at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Woodbury, Sarah K.

    2008-01-01

    The introduction of United Space Alliance's Human Engineering Modeling and Performance Laboratory began in early 2007 in an attempt to address the problematic workspace design issues that the Space Shuttle has imposed on technicians performing maintenance and inspection operations. The Space Shuttle was not expected to require the extensive maintenance it undergoes between flights. As a result, extensive, costly resources have been expended on workarounds and modifications to accommodate ground processing personnel. Consideration of basic human factors principles for design of maintenance is essential during the design phase of future space vehicles, facilities, and equipment. Simulation will be needed to test and validate designs before implementation.

  13. 20. SITE BUILDING 002 SCANNER BUILDING IN COMPUTER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. SITE BUILDING 002 - SCANNER BUILDING - IN COMPUTER ROOM LOOKING AT "CONSOLIDATED MAINTENANCE OPERATIONS CENTER" JOB AREA AND OPERATION WORK CENTER. TASKS INCLUDE RADAR MAINTENANCE, COMPUTER MAINTENANCE, CYBER COMPUTER MAINTENANCE AND RELATED ACTIVITIES. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  14. The Pattern and Dynamics of the Meridional Overturning Circulation in the Upper Ocean

    DTIC Science & Technology

    2008-09-01

    Atlantic . Figure 4a shows that the center of meridional overturning circulation occurs at a level of about one kilometer. Circulation is weak at...maintenance of the meridional overturning circulation in the Atlantic Ocean. 5. Global Simulation The most exciting experiment would be to fully model the...mechanisms responsible for the strength and maintenance of the meridional overturning circulation in the Atlantic Ocean are not

  15. Ground Vehicle Condition Based Maintenance

    DTIC Science & Technology

    2010-10-04

    Diagnostic Process Map 32 FMEAs Developed : • Diesel Engine • Transmission • Alternators Analysis : • Identify failure modes • Derive design factors and...S&T Initiatives  TARDEC P&D Process Map  Component Testing  ARL CBM Research  AMSAA SDC & Terrain Modeling UNCLASSIFIED 3 CBM+ Overview...UNCLASSIFIED 4 RCM and CBM are core processes for CBM+ System Development • Army Regulation 750-1, 20 Sep 2007, p. 79 - Reliability Centered Maintenance (RCM

  16. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    NASA Technical Reports Server (NTRS)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  17. Reliability centered maintenance : a case study of railway transit maintenance to achieve optimal performance.

    DOT National Transportation Integrated Search

    2010-12-01

    The purpose of this qualitative case study was to identify the types of obstacles and patterns experienced by a single heavy rail transit agency located in North America that embedded a Reliability Centered Maintenance (RCM) Process. The outcome of t...

  18. Reliability Centered Maintenance - Methodologies

    NASA Technical Reports Server (NTRS)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  19. Application of reliability-centered-maintenance to BWR ECCS motor operator valve performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feltus, M.A.; Choi, Y.A.

    1993-01-01

    This paper describes the application of reliability-centered maintenance (RCM) methods to plant probabilistic risk assessment (PRA) and safety analyses for four boiling water reactor emergency core cooling systems (ECCSs): (1) high-pressure coolant injection (HPCI); (2) reactor core isolation cooling (RCIC); (3) residual heat removal (RHR); and (4) core spray systems. Reliability-centered maintenance is a system function-based technique for improving a preventive maintenance program that is applied on a component basis. Those components that truly affect plant function are identified, and maintenance tasks are focused on preventing their failures. The RCM evaluation establishes the relevant criteria that preserve system function somore » that an RCM-focused approach can be flexible and dynamic.« less

  20. A Location Analysis Approach for Military Maintenance Scheduling with Geographically Dispersed Service Areas

    DTIC Science & Technology

    2009-01-01

    activities within the patrol area. Maintenance of the Minuteman III weapon system requires maintenance and security teams travel to one or more of 150...launch facilities, all of which are geograph- ically isolated from major population centers. Travel time from F. E. Warren AFB, the main support base...the F. E. Warren AFB work center to make travel preparations, and ends after all maintenance actions are completed, or once the team arrives at one

  1. Development of a generic GMCC simulator.

    DOT National Transportation Integrated Search

    2001-11-01

    This document describes the development and current status of a high fidelity, human-in-the-loop simulator for Airway Facilities : Maintenance Control Centers and Operations Control Centers. Applications include Event Manager, Maintenance Automation ...

  2. [STRATEGY OF USE AND MAINTENANCE OF CLINICAL HOSPITAL CENTER RIJEKA IN ACCORDANCE WITH KEY PERFORMANCE INDICATORS FOR STRATEGIC HEALTHCARE FACILITIES MAINTENANCE].

    PubMed

    Sjekavica, Mariela; Haller, Herman; Cerić, Anita

    2015-01-01

    Building usage is the phase in the building life cycle that is most time-consuming, most functional, most significant due to building purpose and often systematically ignored. Maintenance is the set of activities that ensure the planned duration of facility exploitation phase in accordance with the requirements for quality maintenance of a large number of important building features as well as other elements immanent to the nature of facilities' life. The aim of the study is to show the analysis of the current state of organized, planned and comprehensive managerial approach in hospital utilization and maintenance in the Republic of Croatia, given on the case study of Clinical hospital center in Rijeka. The methodology used consists of relevant literature section of theory of facility utilization, maintenance and management in general, hospital buildings especially, display of practice on case study, and comparison of key performance indicators values obtained through interview with those that author Igal M. Shohet defined in his study by field surveys and statistical analyses. Despite many positive indicators of Clinical hospital center Rijeka maintenance, an additional research is needed in order to define a more complete national hospital maintenance strategy.

  3. Power Grid Maintenance Scheduling Intelligence Arrangement Supporting System Based on Power Flow Forecasting

    NASA Astrophysics Data System (ADS)

    Xie, Chang; Wen, Jing; Liu, Wenying; Wang, Jiaming

    With the development of intelligent dispatching, the intelligence level of network control center full-service urgent need to raise. As an important daily work of network control center, the application of maintenance scheduling intelligent arrangement to achieve high-quality and safety operation of power grid is very important. By analyzing the shortages of the traditional maintenance scheduling software, this paper designs a power grid maintenance scheduling intelligence arrangement supporting system based on power flow forecasting, which uses the advanced technologies in maintenance scheduling, such as artificial intelligence, online security checking, intelligent visualization techniques. It implements the online security checking of maintenance scheduling based on power flow forecasting and power flow adjusting based on visualization, in order to make the maintenance scheduling arrangement moreintelligent and visual.

  4. Plasma confinement theory and transport simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ross, D.W.

    The objectives are: (1) to advance the transport studies of tokamaks, including development and maintenance of the Magnetic Fusion Energy Database, and (2) to provide theoretical interpretation, modeling and equilibrium and stability studies for TEXT-Upgrade. Recent reports, publications, and conference presentations of the Fusion Research Center are listed.

  5. KSC-2011-1396

    NASA Image and Video Library

    2011-02-08

    CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center in Florida hosts a ribbon-cutting ceremony at a new 18,500-square-foot Electrical Maintenance Facility (EMF) officially opening for business. Addressing the attendees is Kennedy Center Director Bob Cabana. Located in Kennedy's Launch Complex 39 area, the EMF will provide new and renovated space for maintenance shops, offices, and equipment and material storage in support of the electrical maintenance functions for the center. The facility is projected to receive Gold certification under the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) rating system. Photo credit: NASA/ Troy Cryder

  6. Facilities maintenance handbook

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This handbook is a guide for facilities maintenance managers. Its objective is to set minimum facilities maintenance standards. It also provides recommendations on how to meet the standards to ensure that NASA maintains its facilities in a manner that protects and preserves its investment in the facilities in a cost-effective manner while safely and efficiently performing its mission. This handbook implements NMI 8831.1, which states NASA facilities maintenance policy and assigns organizational responsibilities for the management of facilities maintenance activities on all properties under NASA jurisdiction. It is a reference for facilities maintenance managers, not a step-by-step procedural manual. Because of the differences in NASA Field Installation organizations, this handbook does not assume or recommend a typical facilities maintenance organization. Instead, it uses a systems approach to describe the functions that should be included in any facilities maintenance management system, regardless of its organizational structure. For documents referenced in the handbook, the most recent version of the documents is applicable. This handbook is divided into three parts: Part 1 specifies common definitions and facilities maintenance requirements and amplifies the policy requirements contained in NMI 8831. 1; Part 2 provides guidance on how to meet the requirements of Part 1, containing recommendations only; Part 3 contains general facilities maintenance information. One objective of this handbook is to fix commonality of facilities maintenance definitions among the Centers. This will permit the application of uniform measures of facilities conditions, of the relationship between current replacement value and maintenance resources required, and of the backlog of deferred facilities maintenance. The utilization of facilities maintenance system functions will allow the Centers to quantitatively define maintenance objectives in common terms, prepare work plans, and develop management information in order to statistically identify and analyze variances from those plans. It will also add credibility to the NASA facilities maintenance budgeting process. The key to a successful maintenance program is the understanding and support of the senior Center managers.

  7. Computer Maintenance Operations Center (CMOC), additional computer support equipment ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Computer Maintenance Operations Center (CMOC), additional computer support equipment - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  8. Rehospitalizations and Emergency Department Visits after Hospital Discharge in Patients Receiving Maintenance Hemodialysis

    PubMed Central

    Wald, Ron; McArthur, Eric; Chertow, Glenn M.; Harel, Shai; Gruneir, Andrea; Fischer, Hadas D.; Garg, Amit X.; Perl, Jeffrey; Nash, Danielle M.; Silver, Samuel; Bell, Chaim M.

    2015-01-01

    Clinical outcomes after a hospital discharge are poorly defined for patients receiving maintenance in-center (outpatient) hemodialysis. To describe the proportion and characteristics of these patients who are rehospitalized, visit an emergency department, or die within 30 days after discharge from an acute hospitalization, we conducted a population-based study of all adult patients receiving maintenance in-center hemodialysis who were discharged between January 1, 2003, and December 31, 2011, from 157 acute care hospitals in Ontario, Canada. For patients with more than one hospitalization, we randomly selected a single hospitalization as the index hospitalization. Of the 11,177 patients included in the final cohort, 1926 (17%) were rehospitalized, 2971 (27%) were treated in the emergency department, and 840 (7.5%) died within 30 days of discharge. Complications of type 2 diabetes mellitus were the most common reason for rehospitalization, whereas heart failure was the most common reason for an emergency department visit. In multivariable analysis using a cause-specific Cox proportional hazards model, the following characteristics were associated with 30-day rehospitalization: older age, the number of hospital admissions in the preceding 6 months, the number of emergency department visits in the preceding 6 months, higher Charlson comorbidity index score, and the receipt of mechanical ventilation during the index hospitalization. Thus, a large proportion of patients receiving maintenance in-center hemodialysis will be readmitted or visit an emergency room within 30 days of an acute hospitalization. A focus on improving care transitions from the inpatient setting to the outpatient dialysis unit may improve outcomes and reduce healthcare costs. PMID:25855772

  9. Object-Oriented Technology-Based Software Library for Operations of Water Reclamation Centers

    NASA Astrophysics Data System (ADS)

    Otani, Tetsuo; Shimada, Takehiro; Yoshida, Norio; Abe, Wataru

    SCADA systems in water reclamation centers have been constructed based on hardware and software that each manufacturer produced according to their design. Even though this approach used to be effective to realize real-time and reliable execution, it is an obstacle to cost reduction about system construction and maintenance. A promising solution to address the problem is to set specifications that can be used commonly. In terms of software, information model approach has been adopted in SCADA systems in other field, such as telecommunications and power systems. An information model is a piece of software specification that describes a physical or logical object to be monitored. In this paper, we propose information models for operations of water reclamation centers, which have not ever existed. In addition, we show the feasibility of the information model in terms of common use and processing performance.

  10. Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170174 computers ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170-174 computers - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  11. KSC-2011-1398

    NASA Image and Video Library

    2011-02-08

    CAPE CANAVERAL, Fla. -- A traditional ribbon-cutting ceremony takes place inside the new 18,500-square-foot Electrical Maintenance Facility (EMF) at NASA's Kennedy Space Center in Florida. From left are Kennedy Director of Operations Mike Benik, NASA Construction of Facility Project Manager Nick Rivieccio and Kennedy Center Director Bob Cabana. Located in Kennedy's Launch Complex 39 area, the EMF will provide new and renovated space for maintenance shops, offices, and equipment and material storage in support of the electrical maintenance functions for the center. The facility is projected to receive Gold certification under the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) rating system. Photo credit: NASA/ Troy Cryder

  12. Competency-based on-the-job training for aviation maintenance and inspection--a human factors approach.

    PubMed

    Walter, D

    2000-08-01

    More than 90% of the critical skills that an aviation maintenance technician uses are acquired through on-the-job training (OJT). Yet many aviation maintenance technicians rely on a 'degenerating buddy system', 'follow Joe around', or unstructured approach to OJT. Many aspects of the aviation maintenance environment point to the need for a structured OJT program, but perhaps the most significant is the practice of job bidding which can create rapid turnover of technicians. The task analytic training system (TATS), a model for developing team-driven structured OJT was developed by the author, and first introduced in Boeing Commercial Airplane Group to provide competency-based OJT for aviation maintenance and inspection personnel. The goal of the model was not only to provide a comprehensive, highly structured training system that could be applied to any maintenance and inspection task, but also to improve team coordination, attitude and morale. The first goal was accomplished by following the systems eight-step process, the latter through incorporating human factors principles such as decision making, communication, team building and conflict resolution into the process itself. In general, the process helps to instill mutual respect and trust, enhance goal-directed behavior, strengthen technicians' self-esteem and responsiveness to new ideas and encourage technicians to make worthwhile contributions. The theoretical background of the model is addressed by illustrating how the proven training methodologies of job task analysis and job instruction training are blended with human factors principles resulting in a unique team-driven approach to training. The paper discusses major elements of the model including needs identification, outlining targeted jobs, writing and verifying training procedures, an approval system, sequencing of training, certifying trainers, implementing, employing tracking mechanisms, evaluating, and establishing a maintenance/audit plan. Relevance to industry. TATS has been successfully installed in several maintenance and inspection areas of The Boeing Company. Four major U.S. airlines--United Airlines, TransWorld Airlines, Northwest Airlines, and USAirways have participated in two years of development and field testing in their maintenance operations (assisted by the author and Dr. Barbara Kanki of NASA Ames Research Center).

  13. Developing a "toolkit" to measure implementation of concurrent palliative care in rural community cancer centers.

    PubMed

    Zubkoff, Lisa; Dionne-Odom, J Nicholas; Pisu, Maria; Babu, Dilip; Akyar, Imatullah; Smith, Tasha; Mancarella, Gisella A; Gansauer, Lucy; Sullivan, Margaret Murray; Swetz, Keith M; Azuero, Andres; Bakitas, Marie A

    2018-02-01

    Despite national guidelines recommending early concurrent palliative care for individuals newly diagnosed with metastatic cancer, few community cancer centers, especially those in underserved rural areas do so. We are implementing an early concurrent palliative care model, ENABLE (Educate, Nurture, Advise, Before Life Ends) in four, rural-serving community cancer centers. Our objective was to develop a "toolkit" to assist community cancer centers that wish to integrate early palliative care for patients with newly diagnosed advanced cancer and their family caregivers. Guided by the RE-AIM (Reach, Effectiveness-Adoption, Implementation, Maintenance) framework, we undertook an instrument-development process based on the literature, expert and site stakeholder review and feedback, and pilot testing during site visits. We developed four instruments to measure ENABLE implementation: (1) the ENABLE RE-AIM Self-Assessment Tool to assess reach, adoption, implementation, and maintenance; (2) the ENABLE General Organizational Index to assess institutional implementation; (3) an Implementation Costs Tool; and (4) an Oncology Clinicians' Perceptions of Early Concurrent Oncology Palliative Care survey. We developed four measures to determine early palliative care implementation. These measures have been pilot-tested, and will be integrated into a comprehensive "toolkit" to assist community cancer centers to measure implementation outcomes. We describe the lessons learned and recommend strategies for promoting long-term program sustainability.

  14. 42 CFR 413.198 - Recordkeeping and cost reporting requirements for outpatient maintenance dialysis.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... outpatient maintenance dialysis. 413.198 Section 413.198 Public Health CENTERS FOR MEDICARE & MEDICAID... § 413.198 Recordkeeping and cost reporting requirements for outpatient maintenance dialysis. (a) Purpose... will enable CMS to determine the costs incurred in furnishing outpatient maintenance dialysis as...

  15. Laser angle sensor

    NASA Technical Reports Server (NTRS)

    Pond, C. R.; Texeira, P. D.

    1985-01-01

    A laser angle measurement system was designed and fabricated for NASA Langley Research Center. The instrument is a fringe counting interferometer that monitors the pitch attitude of a model in a wind tunnel. A laser source and detector are mounted above the model. Interference fringes are generated by a small passive element on the model. The fringe count is accumulated and displayed by a processor in the wind tunnel control room. This report includes optical and electrical schematics, system maintenance and operation procedures.

  16. Alternative Fuels Data Center: Republic Services Reduces Waste with 87 CNG

    Science.gov Websites

    operating on CNG within the next five years. " Rachele Klein, Republic Services Business Development maintenance facilities. Baird and Republic Services teamed up to research and select vehicle manufacturers and operating on CNG within the next five years," Klein said. "The model that stemmed from this

  17. Facility Management Child Care Resource Book. Child Care Operations Center of Expertise.

    ERIC Educational Resources Information Center

    General Services Administration, Washington, DC. Public Buildings Service.

    This guidebook provides maintenance and operations guidelines for managing General Services Administration (GSA) child care centers within the same standards and level of a GSA operated facility. Areas covered address cleaning standards and guidelines; equipment funding and inventory; maintenance of living environments and problem areas;…

  18. KENNEDY SPACE CENTER, FLA. - Launch Pad 39A undergoes sandblasting of its metal structures and surfaces. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

    NASA Image and Video Library

    2003-09-12

    KENNEDY SPACE CENTER, FLA. - Launch Pad 39A undergoes sandblasting of its metal structures and surfaces. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

  19. Relocation of the Deep Space Network Maintenance Center

    NASA Technical Reports Server (NTRS)

    Beutler, K. F.

    1981-01-01

    The Jet Propulsion Laboratory maintains a Deep Space Network (DSN) maintenance center (DMC), whose task is to engineer and manage the repair and calibration program for the electronic and mechanical equipment used in the tracking stations located at Madrid, Spain, and Canberra, Australia. The DMC also manages the Goldstone complex maintenance facility (GCMF), whose task is to repair and calibrate the Goldstone electronic and mechanical equipment. The rationale for moving the facility to Barstow, California, and the benefits derived from the move are discussed.

  20. Rehospitalizations and Emergency Department Visits after Hospital Discharge in Patients Receiving Maintenance Hemodialysis.

    PubMed

    Harel, Ziv; Wald, Ron; McArthur, Eric; Chertow, Glenn M; Harel, Shai; Gruneir, Andrea; Fischer, Hadas D; Garg, Amit X; Perl, Jeffrey; Nash, Danielle M; Silver, Samuel; Bell, Chaim M

    2015-12-01

    Clinical outcomes after a hospital discharge are poorly defined for patients receiving maintenance in-center (outpatient) hemodialysis. To describe the proportion and characteristics of these patients who are rehospitalized, visit an emergency department, or die within 30 days after discharge from an acute hospitalization, we conducted a population-based study of all adult patients receiving maintenance in-center hemodialysis who were discharged between January 1, 2003, and December 31, 2011, from 157 acute care hospitals in Ontario, Canada. For patients with more than one hospitalization, we randomly selected a single hospitalization as the index hospitalization. Of the 11,177 patients included in the final cohort, 1926 (17%) were rehospitalized, 2971 (27%) were treated in the emergency department, and 840 (7.5%) died within 30 days of discharge. Complications of type 2 diabetes mellitus were the most common reason for rehospitalization, whereas heart failure was the most common reason for an emergency department visit. In multivariable analysis using a cause-specific Cox proportional hazards model, the following characteristics were associated with 30-day rehospitalization: older age, the number of hospital admissions in the preceding 6 months, the number of emergency department visits in the preceding 6 months, higher Charlson comorbidity index score, and the receipt of mechanical ventilation during the index hospitalization. Thus, a large proportion of patients receiving maintenance in-center hemodialysis will be readmitted or visit an emergency room within 30 days of an acute hospitalization. A focus on improving care transitions from the inpatient setting to the outpatient dialysis unit may improve outcomes and reduce healthcare costs. Copyright © 2015 by the American Society of Nephrology.

  1. An intelligent tele-healthcare environment offering person-centric and wellness-maintenance services.

    PubMed

    Abidi, S S

    2001-06-01

    Worldwide healthcare delivery trends are undergoing a subtle paradigm shift--patient centered services as opposed to provider centered services and wellness maintenance as opposed to illness management. In this paper we present a Tele-Healthcare project TIDE--Tele-Healthcare Information and Diagnostic Environment. TIDE manifests an 'intelligent' healthcare environment that aims to ensure lifelong coverage of person-specific health maintenance decision-support services--i.e., both wellness maintenance and illness management services--ubiquitously available via the Internet/WWW. Taking on an all-encompassing health maintenance role--spanning from wellness to illness issues--the functionality of TIDE involves the generation and delivery of (a) Personalized, Pro-active, Persistent, Perpetual, and Present wellness maintenance services, and (b) remote diagnostic services for managing noncritical illnesses. Technically, TIDE is an amalgamation of diverse computer technologies--Artificial Intelligence, Internet, Multimedia, Databases, and Medical Informatics--to implement a sophisticated healthcare delivery infostructure.

  2. Translation of alcohol screening and brief intervention guidelines to pediatric trauma centers.

    PubMed

    Mello, Michael J; Bromberg, Julie; Baird, Janette; Nirenberg, Ted; Chun, Thomas; Lee, Christina; Linakis, James G

    2013-10-01

    As part of the American College of Surgeons verification to be a Level 1 trauma center, centers are required to have the capacity to identify trauma patients with risky alcohol use and provide an intervention. Despite supporting scientific evidence and national policy statements encouraging alcohol Screening, Brief Intervention and Referral to Treatment (SBIRT), barriers still exist, which prevent the integration of SBIRT into clinical care. Study objectives of this multisite translational research study were to identify best practices for integrating SBIRT services into routine care for pediatric trauma patients, to measure changes in practice with adoption and implementation of a SBIRT policy, and to define barriers and opportunities for adoption and implementation of SBIRT services at pediatric trauma centers. This translational research study was conducted at seven US pediatric trauma centers during a 3-year period. Changes in SBIRT practice were measured through self-report and medical record review at three different study phases, namely, adoption, implementation, and maintenance phases. According to medical record review, at baseline, 11% of eligible patients were screened and received a brief intervention (if necessary) across all sites. After completion of the SBIRT technical assistance activities, all seven participating trauma centers had effectively developed, adopted, and implemented SBIRT policies for injured adolescent inpatients. Furthermore, across all sites, 73% of eligible patients received SBIRT services after both the implementation and maintenance phases. Opportunities and barriers for successful integration were identified. This model may serve as method for translating SBIRT services into practice within pediatric trauma centers.

  3. KENNEDY SPACE CENTER, FLA. - A worker sandblasts the surface behind the Mobile Launcher Platform on Launch Pad 39A . Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

    NASA Image and Video Library

    2003-09-12

    KENNEDY SPACE CENTER, FLA. - A worker sandblasts the surface behind the Mobile Launcher Platform on Launch Pad 39A . Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

  4. Space shuttle maintenance program planning document

    NASA Technical Reports Server (NTRS)

    Brown, D. V.

    1972-01-01

    A means for developing a space shuttle maintenance program which will be acceptable to the development centers, the operators (KSC and AF), and the manufacturer is presented. The general organization and decision processes for determining the essential scheduled maintenance requirements for the space shuttle orbiter are outlined. The development of initial scheduled maintenance programs is discussed. The remaining maintenance, that is non-scheduled or non-routine maintenance, is directed by the findings of the scheduled maintenance program and the normal operation of the shuttle. The remaining maintenance consists of maintenance actions to correct discrepancies noted during scheduled maintenance tasks, nonscheduled maintenance, normal operation, or condition monitoring.

  5. Plasma confinement theory and transport simulation. Technical progress report, May 1, 1991--April 30, 1992

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ross, D.W.

    The objectives are: (1) to advance the transport studies of tokamaks, including development and maintenance of the Magnetic Fusion Energy Database, and (2) to provide theoretical interpretation, modeling and equilibrium and stability studies for TEXT-Upgrade. Recent reports, publications, and conference presentations of the Fusion Research Center are listed.

  6. Analysis/forecast experiments with a multivariate statistical analysis scheme using FGGE data

    NASA Technical Reports Server (NTRS)

    Baker, W. E.; Bloom, S. C.; Nestler, M. S.

    1985-01-01

    A three-dimensional, multivariate, statistical analysis method, optimal interpolation (OI) is described for modeling meteorological data from widely dispersed sites. The model was developed to analyze FGGE data at the NASA-Goddard Laboratory of Atmospherics. The model features a multivariate surface analysis over the oceans, including maintenance of the Ekman balance and a geographically dependent correlation function. Preliminary comparisons are made between the OI model and similar schemes employed at the European Center for Medium Range Weather Forecasts and the National Meteorological Center. The OI scheme is used to provide input to a GCM, and model error correlations are calculated for forecasts of 500 mb vertical water mixing ratios and the wind profiles. Comparisons are made between the predictions and measured data. The model is shown to be as accurate as a successive corrections model out to 4.5 days.

  7. Improving Air Force Depot Programming by Linking Resources to Capabilities

    DTIC Science & Technology

    2012-01-01

    thank Rick Grisenthwaite at Warner Robins Air Logistics Center, Jamie Jeter at Okla- homa City Air Logistics Center, and Glen Brown at Ogden Air...consistency, we use the term block cycle instead of SCU in our F-16 discussions. 4 8 Im p ro vin g A ir Fo rce D ep o t Pro g ram m in g b y Lin kin...Requirements RAND TR905-B.8 Figure B.9 Depot Purchased Equipment Maintenance Model Output: Projected Aircraft Availability RAND TR905-B.9 A ir cr af t av

  8. KENNEDY SPACE CENTER, FLA. - Sandblasting begins on the Mobile Launcher Platform on Launch Pad 39A to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

    NASA Image and Video Library

    2003-09-12

    KENNEDY SPACE CENTER, FLA. - Sandblasting begins on the Mobile Launcher Platform on Launch Pad 39A to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

  9. Southwestern Division 2012 History Report

    DTIC Science & Technology

    2013-05-01

    maintenance to be performed. Examples of additional maintenance included hydraulic piping replacement, motor control center upgrades, miter gates anchorage...in CEBIS. WATER MANAGEMENT PROGRAM 2012 Hydrology , Hydraulics and Water Management Programs 2012: In March 2012, the Corps’ SWD office...hosted the annual “2012 Reservoir Control Center/Hydrology and Hydraulics annual meeting. The meeting was held in Tulsa, Oklahoma at the Tulsa

  10. Analysis of Employability for the Civil Aviation Maintenance Graduates of Turkey

    ERIC Educational Resources Information Center

    Denizhan, Berrin; Dogru, Alperen

    2017-01-01

    Purpose: With every passing day, the center of gravity for air traffic for the Middle East and Turkey is shifting toward becoming a center for airway transport, maintenance, repair, overhaul (MRO) and transfer. The MRO sector is gaining importance because of this increase in Turkey. The purpose of this study is to examine the future employability…

  11. Initiation and Maintenance of Fitness Center Utilization in an Incentive-Based Employer Wellness Program

    PubMed Central

    Abraham, Jean Marie; Crespin, Daniel; Rothman, Alexander

    2015-01-01

    Objective Investigate the initiation and maintenance of participation in an employer-based wellness program that provides financial incentives for fitness center utilization. Methods Using multivariate analysis, we investigated how employees’ demographics, health status, exercise-related factors, and lifestyle change preferences affect program participation. Results Forty-two percent of eligible employees participated in the program and 24% earned a $20 incentive at least once by utilizing a gym 8 times or more in a month. On average, participants utilized fitness centers 7.0 months each year and earned credit 4.5 months. Participants’ utilization diminished after their first year in the program. Conclusions Factors associated with initiation and maintenance of fitness center utilization were similar. Declining utilization over time raises concern about the long-run effectiveness of fitness-focused wellness programs. Employers may want to consider additional levers to positively reinforce participation. PMID:26340283

  12. Alternative Fuels Data Center: Liquefied Natural Gas Allows for Cleaner

    Science.gov Websites

    maintenance facilities to support them. This effort has contributed to millions of dollars saved and more than operation and maintenance of the vehicles. The city constructed a new LNG maintenance facility and then recently retrofitted an existing maintenance facility with the necessary methane detectors, alarms, and

  13. Logistics Operations Management Center: Maintenance Support Baseline (LOMC-MSB)

    NASA Technical Reports Server (NTRS)

    Kurrus, R.; Stump, F.

    1995-01-01

    The Logistics Operations Management Center Maintenance Support Baseline is defined. A historical record of systems, applied to and deleted from, designs in support of future management and/or technical analysis is provided. All Flight elements, Ground Support Equipment, Facility Systems and Equipment and Test Support Equipment for which LOMC has responsibilities at Kennedy Space Center and other locations are listed. International Space Station Alpha Program documentation is supplemented. The responsibility of the Space Station Launch Site Support Office is established.

  14. Decreasing inventory of a cement factory roller mill parts using reliability centered maintenance method

    NASA Astrophysics Data System (ADS)

    Witantyo; Rindiyah, Anita

    2018-03-01

    According to data from maintenance planning and control, it was obtained that highest inventory value is non-routine components. Maintenance components are components which procured based on maintenance activities. The problem happens because there is no synchronization between maintenance activities and the components required. Reliability Centered Maintenance method is used to overcome the problem by reevaluating maintenance activities required components. The case chosen is roller mill system because it has the highest unscheduled downtime record. Components required for each maintenance activities will be determined by its failure distribution, so the number of components needed could be predicted. Moreover, those components will be reclassified from routine component to be non-routine component, so the procurement could be carried out regularly. Based on the conducted analysis, failure happens in almost every maintenance task are classified to become scheduled on condition task, scheduled discard task, schedule restoration task and no schedule maintenance. From 87 used components for maintenance activities are evaluated and there 19 components that experience reclassification from non-routine components to routine components. Then the reliability and need of those components were calculated for one-year operation period. Based on this invention, it is suggested to change all of the components in overhaul activity to increase the reliability of roller mill system. Besides, the inventory system should follow maintenance schedule and the number of required components in maintenance activity so the value of procurement will be decreased and the reliability system will increase.

  15. Using Facility Condition Assessments to Identify Actions Related to Infrastructure

    NASA Technical Reports Server (NTRS)

    Rubert, Kennedy F.

    2010-01-01

    To support cost effective, quality research it is essential that laboratory and testing facilities are maintained in a continuous and reliable state of availability at all times. NASA Langley Research Center (LaRC) and its maintenance contractor, Jacobs Technology, Inc. Research Operations, Maintenance, and Engineering (ROME) group, are in the process of implementing a combined Facility Condition Assessment (FCA) and Reliability Centered Maintenance (RCM) program to improve asset management and overall reliability of testing equipment in facilities such as wind tunnels. Specific areas are being identified for improvement, the deferred maintenance cost is being estimated, and priority is being assigned against facilities where conditions have been allowed to deteriorate. This assessment serves to assist in determining where to commit available funds on the Center. RCM methodologies are being reviewed and enhanced to assure that appropriate preventive, predictive, and facilities/equipment acceptance techniques are incorporated to prolong lifecycle availability and assure reliability at minimum cost. The results from the program have been favorable, better enabling LaRC to manage assets prudently.

  16. Determinants of HMO success: the case of Complete Health.

    PubMed

    Widra, L S; Fottler, M D

    1992-01-01

    The health maintenance organization (HMO) industry has experienced a variety of difficulties and criticisms in recent years. Various hybrid models have been proposed to alleviate these problems. This article presents an in-depth case study of factors associated with the success of one such hybrid: an individual practice association (IPA)-model HMO affiliated with an academic health center. The major success factors identified include the plan design/structure, the strategic orientation/practices, and the stakeholder management orientation practices.

  17. How the Station will operate. [operation, management, and maintenance in space

    NASA Technical Reports Server (NTRS)

    Cox, John T.

    1988-01-01

    Aspects of the upcoming operational phase of the Space Station (SS) are examined. What the crew members will do with their time in their specialized roles is addressed. SS maintenance and servicing and the interaction of the SS Control Center with Johnson Space Center is discussed. The planning of payload operations and strategic planning for the SS are examined.

  18. Process Time Refinement for Reusable Launch Vehicle Regeneration Modeling

    DTIC Science & Technology

    2008-03-01

    predicted to fail, or have failed. 3) Augmenting existing space systems with redundant or additional capability to enhance space system performance or...Canopies, External Tanks/Pods/Pylon Ejectors , Armament Bay Doors, Missile Launchers, Wing and Fuselage Center Line Racks, Bomb Bay Release...Systems Test 04583 Thrust Maintenance Operation 04584 Silo Door Operation 04650 Initial Build-up-Recovery Vehicle (RV) 147 04610 Nondestructive

  19. Alternative Fuels Data Center: Propane

    Science.gov Websites

    they work, and find information about vehicle availability, conversions, emissions, maintenance, and Fuel Prices Conserve Fuel Idle Reduction Parts & Equipment Maintenance Driving Behavior Fleet

  20. KSC-2011-1395

    NASA Image and Video Library

    2011-02-08

    CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center in Florida hosts a ribbon-cutting ceremony at a new 18,500-square-foot Electrical Maintenance Facility (EMF) officially opening for business. Addressing the attendees is NASA Construction of Facility Project Manager Nick Rivieccio. Located in Kennedy's Launch Complex 39 area, the EMF will provide new and renovated space for maintenance shops, offices, and equipment and material storage in support of the electrical maintenance functions for the center. The facility is projected to receive Gold certification under the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) rating system. Photo credit: NASA/ Troy Cryder

  1. KSC-2011-1397

    NASA Image and Video Library

    2011-02-08

    CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center in Florida hosts a ribbon-cutting ceremony at a new 18,500-square-foot Electrical Maintenance Facility (EMF) officially opening for business. Addressing the attendees is Kennedy Director of Operations Mike Benik. Located in Kennedy's Launch Complex 39 area, the EMF will provide new and renovated space for maintenance shops, offices, and equipment and material storage in support of the electrical maintenance functions for the center. The facility is projected to receive Gold certification under the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) rating system. Photo credit: NASA/ Troy Cryder

  2. Around Marshall

    NASA Image and Video Library

    1993-09-15

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. Marshall SPace Flight Center (MSFC) is begirning to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models are used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup is to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability provides general visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC).

  3. Around Marshall

    NASA Image and Video Library

    1993-12-15

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. Marshall Spce Flight Center (MSFC) is begirning to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models are used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup is to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability provides general visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC).

  4. A B-52H, tail number 61-0025, arrives at NASA's Dryden Flight Research Center after landing July 30,

    NASA Technical Reports Server (NTRS)

    2001-01-01

    NASA Dryden Flight Research Center, Edwards, California, received an 'H' model B-52 Stratofortress aircraft on July 30, 2001. The B-52H will be used as an air-launch aircraft supporting NASA's flight research and advanced technology demonstration efforts. Dryden received the B-52H from the U.S. Air Force's (USAF) 23rd Bomb Squadron, 5th Bombardment Wing (Air Combat Command), located at Minot AFB, N.D. A USAF crew flew the aircraft to Dryden. The aircraft, USAF tail number 61-0025, will be loaned initially, then later transferred from the USAF to NASA. The B-52H is scheduled to leave Dryden Aug. 2 for de-militarization and Programmed Depot Maintenance (PDM) at Tinker Air Force Base (AFB), Oklahoma. The depot-level maintenance is scheduled to last about six months and includes a thorough maintenance and inspection process. The newly arrived B-52H is slated to replace Dryden's famous B-52B '008,' in the 2003-2004 timeframe. It will take about one year for the B-52H to be ready for flight research duties. This time includes PDM, construction of the new pylon, installation of the flight research instrumentation equipment, and aircraft envelope clearance flights.

  5. A hybrid zone revisited: molecular and morphological analysis of the maintenance, movement, and evolution of a Great Plains avian (Cardinalidae: Pheucticus) hybrid zone

    PubMed Central

    METTLER, R. D.; SPELLMAN, G. M.

    2014-01-01

    Black-headed Grosbeaks (Pheucticus melanocephalus) and Rose-breasted Grosbeaks (Pheucticus ludovicianus) are passerine bird species known to hybridize in the Great Plains of North America. Both extrinsic (environmental) and intrinsic factors (pre- and postzygotic reproductive isolation) have been credited for the generation and maintenance of the grosbeak hybrid zone, but little is known about the genetic characteristics of this hybrid zone. To investigate the stability and extent of the grosbeak hybrid zone, we constructed clines from both molecular sequence data (mtDNA, 3 autosomal intron loci, and 1 Z-linked locus) and morphological data (morphometric analyses and hybrid index scores) to determined zone center and width. Hybrid zone center and width were also determined for samples collected across the zone 40 years ago from morphological data. The present and past clines were compared and provided support for stability in hybrid zone location and width, and the evolutionary implications of this are discussed. Three models of hybrid zone maintenance were investigated to consider the influence of intrinsic and extrinsic factors on this zone. Our results suggest low hybrid frequencies, a stable zone location and narrow width, and reduced hybrid fitness over the past 40 years best categorize the grosbeak hybrid zone as a tension zone. PMID:19619198

  6. A B-52H, on loan to NASA's Dryden Flight Research Center, makes a pass down the runway prior to land

    NASA Technical Reports Server (NTRS)

    2001-01-01

    NASA Dryden Flight Research Center, Edwards, California, received an 'H' model B-52 Stratofortress aircraft on July 30, 2001. The B-52H will be used as an air-launch aircraft supporting NASA's flight research and advanced technology demonstration efforts. Dryden received the B-52H from the U.S. Air Force's (USAF) 23rd Bomb Squadron, 5th Bombardment Wing (Air Combat Command), located at Minot AFB, N.D. A USAF crew flew the aircraft to Dryden. The aircraft, USAF tail number 61-0025, will be loaned initially, then later transferred from the USAF to NASA. The B-52H is scheduled to leave Dryden Aug. 2 for de-militarization and Programmed Depot Maintenance (PDM) at Tinker Air Force Base (AFB), Oklahoma. The depot-level maintenance is scheduled to last about six months and includes a thorough maintenance and inspection process. The newly arrived B-52H is slated to replace Dryden's famous B-52B '008,' in the 2003-2004 timeframe. It will take about one year for the B-52H to be ready for flight research duties. This time includes PDM, construction of the new pylon, installation of the flight research instrumentation equipment, and aircraft envelope clearance flights.

  7. Industrial Machinery Maintenance and Repair. Florida Vocational Program Guide.

    ERIC Educational Resources Information Center

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in industrial machinery maintenance and repair in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of millwrights, maintenance mechanics, and machinery erectors; program…

  8. NUCare: Advancing research on technological integration for self-management in the aging population.

    PubMed

    Lees, Kristin E; Guthrie, Barbara J; Henderson, Elizabeth L; Jimison, Holly B; Sceppa, Carmen; Pavel, Misha; Gordon, Christine; Fulmer, Terry

    The Center for Technology in Support of Self-Management and Health (NUCare) is an exploratory research center funded by the National Institute of Nursing Research's P20 mechanism positioned to conduct rigorous research on the integration of technology in the self-management of the older adult population. The purpose of this paper is to describe the development and application of an evaluation plan and preliminary evaluation results from the first year of implementation. This evaluation plan is derived from and is consistent with Dorsey et al.'s (2014) logic model. Dorsey's model provided guidelines for evaluating sustainability, leveraging of resources, and interdisciplinary collaboration within the center. Preliminary results and strategies for addressing findings from the first year of evaluation are discussed. A secondary aim of this paper is to showcase the relevance of this center to the advancement and maintenance of health in the aging population. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Predicting animal home-range structure and transitions using a multistate Ornstein-Uhlenbeck biased random walk

    USGS Publications Warehouse

    Breed, Greg A.; Golson, Emily A.; Tinker, M. Tim

    2017-01-01

    The home‐range concept is central in animal ecology and behavior, and numerous mechanistic models have been developed to understand home range formation and maintenance. These mechanistic models usually assume a single, contiguous home range. Here we describe and implement a simple home‐range model that can accommodate multiple home‐range centers, form complex shapes, allow discontinuities in use patterns, and infer how external and internal variables affect movement and use patterns. The model assumes individuals associate with two or more home‐range centers and move among them with some estimable probability. Movement in and around home‐range centers is governed by a two‐dimensional Ornstein‐Uhlenbeck process, while transitions between centers are modeled as a stochastic state‐switching process. We augmented this base model by introducing environmental and demographic covariates that modify transition probabilities between home‐range centers and can be estimated to provide insight into the movement process. We demonstrate the model using telemetry data from sea otters (Enhydra lutris) in California. The model was fit using a Bayesian Markov Chain Monte Carlo method, which estimated transition probabilities, as well as unique Ornstein‐Uhlenbeck diffusion and centralizing tendency parameters. Estimated parameters could then be used to simulate movement and space use that was virtually indistinguishable from real data. We used Deviance Information Criterion (DIC) scores to assess model fit and determined that both wind and reproductive status were predictive of transitions between home‐range centers. Females were less likely to move between home‐range centers on windy days, less likely to move between centers when tending pups, and much more likely to move between centers just after weaning a pup. These tendencies are predicted by theoretical movement rules but were not previously known and show that our model can extract meaningful behavioral insight from complex movement data.

  10. Application and preventive maintenance of neurology medical equipment in isfahan alzahra hospital.

    PubMed

    Alikhani, Parivash; Vesal, Sahar; Kashefi, Parviz; Pour, Ramin Etamadi; Khorvash, Fariborz; Askari, Gholamreza; Meamar, Rokhsareh

    2013-05-01

    Nowadays Medical equipment plays an important role in the treatment and in the medical education. Using outdated preventive maintenance (PM) system may cause problems in the cutting edge medical equipment, Nervous system disease's equipment (In diagnosis and treatment) which are crucial for every medical center. Based on above facts we focused on nervous system treat units' equipment and informed the supervisors and their colleagues about the latest equipment maintenance status and promoted methodical and correct method to be used for medical equipment maintenance. This research is an analytical descriptive and has been done on the base information from a particular time to past. We gathered our required information of 2009 from Alzahra Medical Center. We divided this research info 2 main phases. In the first phase, we picked out Neurosurgery and Neourology diseases medical equipment (diagnosis and therapy equipment) and in the second phase, we need to implement a methodical PM for every equipment. Research has shown that there are 19nervous system equipment in Alzahra Medical center, categorized in diagnostic (13 pcs), therapeutic (4 pcs) and diagnostic-therapeutic (2 pcs). As we declare in methods part of this research, we categorized medical equipment in Food and Drug Administration (FDA) segmentation. Capital-scarce equipment: Magnetic resonance imaging, Eco Doppler, Kamalaarak ultrasonic surgical aspirator, Stereotactic, computed tomography-scan, euroendoscope/vital-scarce equipment: Coblation, Sonoco, vaterjet/scarce equipment: Transcranial color Doppler, electroencephalogram, electromyography, surgical microscope. Survey of application and preventive maintenance of neurology medical equipment in Isfahan Alzahra hospital show there is no P.M system. Implementing a complete P.M system for this medical center is crucial to preventing cause problems for these medical equipment and decreasing maintenance costs and gaining uptime. Researchers of this article have tried to provide PM, use of texts, web and experts.

  11. Alternative Fuels Data Center: Active Transit

    Science.gov Websites

    : Active Transit on AddThis.com... More in this section... Idle Reduction Parts & Equipment Maintenance Reduction Parts & Equipment Maintenance Driving Behavior Fleet Rightsizing System Efficiency Locate

  12. Alternative Fuels Data Center: Newsletters

    Science.gov Websites

    Offers information on the development and maintenance of electric motors, drives, and related components Fuels Fuel Prices Conserve Fuel Idle Reduction Parts & Equipment Maintenance Driving Behavior Fleet

  13. Space Operations Center orbit altitude selection strategy

    NASA Technical Reports Server (NTRS)

    Indrikis, J.; Myers, H. L.

    1982-01-01

    The strategy for the operational altitude selection has to respond to the Space Operation Center's (SOC) maintenance requirements and the logistics demands of the missions to be supported by the SOC. Three orbit strategies are developed: two are constant altitude, and one variable altitude. In order to minimize the effect of atmospheric uncertainty the dynamic altitude method is recommended. In this approach the SOC will operate at the optimum altitude for the prevailing atmospheric conditions and logistics model, provided that mission safety constraints are not violated. Over a typical solar activity cycle this method produces significant savings in the overall logistics cost.

  14. EERE: Alternative Fuels Data Center Home Page

    Science.gov Websites

    facility safe with a first-of-its-kind CNG Maintenance Facility Modifications Handbook. Find Fleet & Equipment Maintenance Driving Behavior Fleet Rightsizing System Efficiency Locate Stations Search

  15. PET Radiopharmaceuticals in Brazil and Belarus: Economic Comparison Using the Case of 18FDG.

    PubMed

    Brinkevich, Sviatoslav; Pires, Leonardo Paredes; Portilho, Filipe Leal; Santos-Oliveira, Ralph

    2018-01-01

    The production of radiopharmaceuticals, especially the PET ones, is a complex combination of economic and social factors. Despite the social aspects, that are essential, the economic issue must be considered and play an important parameter for the implementation and maintenance of producer centers around the world, with especial regards for countries which face economic crisis and/or belongs to aegis of under development countries. In order to evaluate this scenario with carried out this study, comparing a well-established producer center in Brazil and a new on in Belarus. The results showed that the producer center in Brazil face serious economic problems and all the production logistic must be re-done. On the other hand the new producer center in Belarus started following a new model of production and although it has not been profitable, the perspectives seem to be better than the Brazilian producer center. The Brazilian model for PET radiopharmaceutical productions should be revised in order to avoid waste and create a new perspective for the research area. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  16. Sinclair and Dyes Inlets Toxicity Study: An Assessment of Copper Bioavailability and Toxicity in Surface Waters Adjacent to the Puget Sound Naval Shipyard and Intermediate Maintenance Facility

    DTIC Science & Technology

    2009-12-01

    biblio /92109.html WEF 2004a. “Proposed Research for Developing the Biotic Ligand Model for Establishing Water Quality Criteria. Water Environment...Systems Center, Bremerton, WA. August 2006. Ecology Publication Number 06-10-54 http://www.ecy.wa.gov/ biblio /0610054.html Eriksen, R.S., Mackey

  17. Applying Systems Engineering to Improve the Main Gas Turbine Exhaust System Maintenance Strategy for the CG-47 Ticonderoga Class Cruiser

    DTIC Science & Technology

    2015-09-01

    15 4. Commander, Naval Regional Maintenance Center .................. 15 5 . Private Ship Repair Industry...TURBINE EXHAUST SYSTEM MAINTENANCE STRATEGY FOR THE CG-47 TICONDEROGA CLASS CRUISER 5 . FUNDING NUMBERS 6. AUTHOR(S) Sparks, Robert D. 7. PERFORMING...condition-based maintenance, condition-directed, failure finding, fault tree analysis 15 . NUMBER OF PAGES 133 16. PRICE CODE 17. SECURITY

  18. Prevalence and associated factors of hepatitis C virus infection among renal disease patients on maintenance hemodialysis in three health centers in Aden, Yemen: a cross sectional study.

    PubMed

    Aman, Khadija; Al-Dubai, Sami AbdoRadman; Aman, Reema; Hawash, Aamenah; Alshagga, Mustafa; Kassim, Saba

    2015-03-01

    We aimed to assess the prevalence and factors associated with positive anti-hepatitis C virus (HCV) antibodies among patients on maintenance hemodialysis (HD) in three centers in Aden, Yemen. The data from 219 patients and their records over the period between 2000-2013, was extracted and analyzed. The mean ± SD age of the patients was 47.08 ± 13.9 years; 74.4% of them were married and 14.6% were employed. The prevalence of validated anti-HCV-positive cases was 40.2% (95%CI 33.64%-46.73%). The mean ± SD duration on HD of all the patients was 35.09 ± 38 months. On bivariate analysis, the duration on HD and attending more than one center for HD associated significantly with anti-HCV positivity (P <0.05). On multivariate fully adjusted Poisson regression modelling, controlled for age, Patients attending more than one center and those who underwent HD for longer durations were more likely to be positive for anti- HCV antibodies [P = 0.004, adjusted prevalence rate ratio (APRR) = 1.87, 95% confidence interval (CI): 1.22-2.88; P = 0.0005, APRR = 1.01, 95% CI: 1.00-1.02. In this study sample, the prevalence of HCV was significant. Patients attending more than one center and those who underwent HD for longer durations were found to be more likely to contract HCV. Enhancing existing infection control measures and allocating more resources to HD centers therefore warrants consideration.

  19. Alternative Fuels Data Center: Choice Environmental Services Chooses

    Science.gov Websites

    been a hit with both drivers and maintenance staff. Drivers appreciate the reduction in diesel emissions while running their routes. Lower maintenance costs has also been an extremely pleasant surprise with the CNG trucks and found there is significantly less maintenance required on CNG trucks than on

  20. Spacecraft Onboard Software Maintenance: An Effective Approach which Reduces Costs and Increases Science Return

    NASA Technical Reports Server (NTRS)

    Shell, Elaine M.; Lue, Yvonne; Chu, Martha I.

    1999-01-01

    Flight software (FSW) is a mission critical element of spacecraft functionality and performance. When ground operations personnel interface to a spacecraft, they are dealing almost entirely with onboard software. This software, even more than ground/flight communications systems, is expected to perform perfectly at all times during all phases of on-orbit mission life. Due to the fact that FSW can be reconfigured and reprogrammed to accommodate new spacecraft conditions, the on-orbit FSW maintenance team is usually significantly responsible for the long-term success of a science mission. Failure of FSW can result in very expensive operations work-around costs and lost science opportunities. There are three basic approaches to staffing on-orbit software maintenance, namely: (1) using the original developers, (2) using mission operations personnel, or (3) assembling a Center of Excellence for multi-spacecraft on-orbit FSW support. This paper explains a National Aeronautics and Space Administration, Goddard Space Flight Center (NASA/GSFC) experience related to the roles of on-orbit FSW maintenance personnel. It identifies the advantages and disadvantages of each of the three approaches to staffing the FSW roles, and demonstrates how a cost efficient on-orbit FSW Maintenance Center of Excellence can be established and maintained with significant return on the investment.

  1. Implementing chronic care for COPD: planned visits, care coordination, and patient empowerment for improved outcomes.

    PubMed

    Fromer, Len

    2011-01-01

    Current primary care patterns for chronic obstructive pulmonary disease (COPD) focus on reactive care for acute exacerbations, often neglecting ongoing COPD management to the detriment of patient experience and outcomes. Proactive diagnosis and ongoing multifactorial COPD management, comprising smoking cessation, influenza and pneumonia vaccinations, pulmonary rehabilitation, and symptomatic and maintenance pharmacotherapy according to severity, can significantly improve a patient's health-related quality of life, reduce exacerbations and their consequences, and alleviate the functional, utilization, and financial burden of COPD. Redesign of primary care according to principles of the chronic care model, which is implemented in the patient-centered medical home, can shift COPD management from acute rescue to proactive maintenance. The chronic care model and patient-centered medical home combine delivery system redesign, clinical information systems, decision support, and self-management support within a practice, linked with health care organization and community resources beyond the practice. COPD care programs implementing two or more chronic care model components effectively reduce emergency room and inpatient utilization. This review guides primary care practices in improving COPD care workflows, highlighting the contributions of multidisciplinary collaborative team care, care coordination, and patient engagement. Each primary care practice can devise a COPD care workflow addressing risk awareness, spirometric diagnosis, guideline-based treatment and rehabilitation, and self-management support, to improve patient outcomes in COPD.

  2. Around Marshall

    NASA Image and Video Library

    1993-09-15

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. The Marshall Space Flight Center (MSFC) in Huntsville, Alabama began to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models were used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup was to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability providedgeneral visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC). The X-34 program was cancelled in 2001.

  3. Marshall Engineers Use Virtual Reality

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. Marshall Spce Flight Center (MSFC) is begirning to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models are used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup is to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability provides general visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC).

  4. Computer Applications and Virtual Environments (CAVE)

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. Marshall SPace Flight Center (MSFC) is begirning to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models are used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup is to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability provides general visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC).

  5. ComputerApplications and Virtual Environments (CAVE)

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Virtual Reality (VR) can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. The Marshall Space Flight Center (MSFC) in Huntsville, Alabama began to utilize VR for design analysis in the X-34 experimental reusable space vehicle. Analysts at MSFC's Computer Applications and Virtual Environments (CAVE) used Head Mounted Displays (HMD) (pictured), spatial trackers and gesture inputs as a means to animate or inhabit a properly sized virtual human model. These models were used in a VR scenario as a way to determine functionality of space and maintenance requirements for the virtual X-34. The primary functions of the virtual X-34 mockup was to support operations development and design analysis for engine removal, the engine compartment and the aft fuselage. This capability providedgeneral visualization support to engineers and designers at MSFC and to the System Design Freeze Review at Orbital Sciences Corporation (OSC). The X-34 program was cancelled in 2001.

  6. Navy Leadership -- Chief of Naval Operations

    Science.gov Websites

    Southwest Regional Maintenance Center (SWRMC) Mobile Innovation Center (MIC). The MIC is an additive manufacturing mobile training center where Sailors and Navy Team members can turn ideas into prototypes. SWRMC

  7. KENNEDY SPACE CENTER, FLA. - Workers, covered in protective clothing and breathing apparatus, continue sandblasting on the Mobile Launcher Platform on Launch Pad 39A to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

    NASA Image and Video Library

    2003-09-12

    KENNEDY SPACE CENTER, FLA. - Workers, covered in protective clothing and breathing apparatus, continue sandblasting on the Mobile Launcher Platform on Launch Pad 39A to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

  8. KENNEDY SPACE CENTER, FLA. - On Launch Pad 39A, clouds of dust float away from the Mobile Launcher Platform, which is undergoing sandblasting to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

    NASA Image and Video Library

    2003-09-12

    KENNEDY SPACE CENTER, FLA. - On Launch Pad 39A, clouds of dust float away from the Mobile Launcher Platform, which is undergoing sandblasting to remove corrosion before repainting. Routine maintenance includes sandblasting and repainting as preventive means to minimize corrosion.

  9. A Proposed Approach for Prioritizing Maintenance at NASA Centers

    NASA Technical Reports Server (NTRS)

    Dunn, Steven C.; Sawyer, Melvin H.

    2013-01-01

    The National Aeronautics and Space Administration (NASA) manages a vast array of infrastructure assets across ten National Centers with a worth of at least 30 billion dollars. Eighty percent of this infrastructure is greater than 40 years old and is in degraded condition. Maintenance budgets are typically less than one percent of current replacement value (CRV), much less than the 2-4% recommended by the National Research Council. The maintenance backlog was 2.55 billion dollars in FY10 and growing. NASA s annual budgets have flattened and are at risk of being reduced, so the problem is becoming even more difficult. NASA Centers utilize various means to prioritize and accomplish maintenance within available budgets, though data is suspect and processes are variable. This paper offers a structured means to prioritize maintenance based on mission criticality and facility performance (ability of the facility to deliver on its purpose). Mission alignment is assessed using the current timeframe Mission Dependence Index and a measure of facility alignment with the 2011 NASA Strategic Plan for the long-term perspective. Facility performance is assessed by combining specific findings from a structured facility condition assessment and an assessment of actual functional output. These are then combined in a matrix to identify the facilities most critical to mission and able to deliver services. The purpose of this approach is to provide the best benefits for the available funding. Additionally, this rationale can also be applied to the prioritization of investment (recapitalization) projects so that the ultimate customers of this paper, the senior infrastructure managers at each NASA Center, are better able to strategically manage their capabilities.

  10. Integration and testing of a multistack automated cone machine

    DOT National Transportation Integrated Search

    2004-06-01

    The Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center has been developing robotic equipment and machinery for highway maintenance and construction operations. It is a cooperative venture between the University of Califo...

  11. Alternative Fuels Data Center: Hydraulic Hybrids: A Success in Ann Arbor

    Science.gov Websites

    off with fuel savings, lower maintenance costs, and increased productivity. American Recovery and regenerative braking system also means huge savings in brake maintenance. Normally, a truck that stops and

  12. Development of vegetation cutting tool attachments for the automated roadway debris vacuums.

    DOT National Transportation Integrated Search

    2008-12-01

    The Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center has been : developing robotic equipment and machinery for highway maintenance and construction operations. It is a : cooperative venture between the University of Ca...

  13. Research notes : improving maintenance practices.

    DOT National Transportation Integrated Search

    2001-03-01

    Last summer, the ODOT Research Group and Technology Transfer (T2) Center funded a four-month trial of a piece of shoulder maintenance equipment called The Retriever. Research staff also inspected a berm shaper developed by District 3 crews. : T...

  14. HMO Penetration, Hospital Competition, and Growth of Ambulatory Surgery Centers

    PubMed Central

    Bian, John; Morrisey, Michael A.

    2006-01-01

    Using metropolitan statistical area (MSA) panel data from 1992-2001 constructed from the 2002 Medicare Online Survey Certification and Reporting (OSCAR) System, we estimate the market effects of health maintenance organization (HMO) penetration and hospital competition on the growth of freestanding ambulatory surgery centers (ASCs). Our regression models with MSA and year fixed effects suggest that a 10-percentage-point increase in HMO penetration is associated with a decrease of 3 ASCs per 1 million population. A decrease from 5 to 4 equal-market-shared hospitals in a market is associated with an increase of 2.5 ASCs per 1 million population. PMID:17290661

  15. HMO penetration, hospital competition, and growth of ambulatory surgery centers.

    PubMed

    Bian, John; Morrisey, Michael A

    2006-01-01

    Using metropolitan statistical area (MSA) panel data from 1992-2001 constructed from the 2002 Medicare Online Survey Certification and Reporting (OSCAR) System, we estimate the market effects of health maintenance organization (HMO) penetration and hospital competition on the growth of freestanding ambulatory surgery centers (ASCs). Our regression models with MSA and year fixed effects suggest that a 10-percentage-point increase in HMO penetration is associated with a decrease of 3 ASCs per 1 million population. A decrease from 5 to 4 equal-market-shared hospitals in a market is associated with an increase of 2.5 ASCs per 1 million population.

  16. Space and Missile Systems Center Standard: Software Development

    DTIC Science & Technology

    2015-01-16

    maintenance , or any other activity or combination of activities resulting in products . Within this standard, requirements to “develop,” “define...integration, reuse, reengineering, maintenance , or any other activity that results in products ). The term “developer” encompasses all software team...activities that results in software products . Software development includes new development, modification, reuse, reengineering, maintenance , and any other

  17. 77 FR 8877 - ICD-9-CM Coordination and Maintenance (C&M) Committee Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-15

    ... Coordination and Maintenance (C&M) Committee Meeting National Center for Health Statistics (NCHS... Coordination and Maintenance (C&M) Committee meeting. Time and Date: 9 a.m.-5:30 p.m., March 5, 2012. Place... entering the building. Attendees who wish to attend the ICD- 9-CM C&M meeting on March 5, 2012, must submit...

  18. The engine maintenance scheduling by using reliability centered maintenance method and the identification of 5S application in PT. XYZ

    NASA Astrophysics Data System (ADS)

    Sembiring, N.; Panjaitan, N.; Saragih, A. F.

    2018-02-01

    PT. XYZ is a manufacturing company that produces fresh fruit bunches (FFB) to Crude Palm Oil (CPO) and Palm Kernel Oil (PKO). PT. XYZ consists of six work stations: receipt station, sterilizing station, thressing station, pressing station, clarification station, and kernelery station. So far, the company is still implementing corrective maintenance maintenance system for production machines where the machine repair is done after damage occurs. Problems at PT. XYZ is the absence of scheduling engine maintenance in a planned manner resulting in the engine often damaged which can disrupt the smooth production. Another factor that is the problem in this research is the kernel station environment that becomes less convenient for operators such as there are machines and equipment not used in the production area, slippery, muddy, scattered fibers, incomplete use of PPE, and lack of employee discipline. The most commonly damaged machine is in the seed processing station (kernel station) which is cake breaker conveyor machine. The solution of this problem is to propose a schedule plan for maintenance of the machine by using the method of reliability centered maintenance and also the application of 5S. The result of the application of Reliability Centered maintenance method is obtained four components that must be treated scheduled (time directed), namely: for bearing component is 37 days, gearbox component is 97 days, CBC pen component is 35 days and conveyor pedal component is 32 days While after identification the application of 5S obtained the proposed corporate environmental improvement measures in accordance with the principles of 5S where unused goods will be moved from the production area, grouping goods based on their use, determining the procedure of cleaning the production area, conducting inspection in the use of PPE, and making 5S slogans.

  19. Structure and regulatory role of the C-terminal winged helix domain of the archaeal minichromosome maintenance complex

    PubMed Central

    Wiedemann, Christoph; Szambowska, Anna; Häfner, Sabine; Ohlenschläger, Oliver; Gührs, Karl-Heinz; Görlach, Matthias

    2015-01-01

    The minichromosome maintenance complex (MCM) represents the replicative DNA helicase both in eukaryotes and archaea. Here, we describe the solution structure of the C-terminal domains of the archaeal MCMs of Sulfolobus solfataricus (Sso) and Methanothermobacter thermautotrophicus (Mth). Those domains consist of a structurally conserved truncated winged helix (WH) domain lacking the two typical ‘wings’ of canonical WH domains. A less conserved N-terminal extension links this WH module to the MCM AAA+ domain forming the ATPase center. In the Sso MCM this linker contains a short α-helical element. Using Sso MCM mutants, including chimeric constructs containing Mth C-terminal domain elements, we show that the ATPase and helicase activity of the Sso MCM is significantly modulated by the short α-helical linker element and by N-terminal residues of the first α-helix of the truncated WH module. Finally, based on our structural and functional data, we present a docking-derived model of the Sso MCM, which implies an allosteric control of the ATPase center by the C-terminal domain. PMID:25712103

  20. Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle Management on Ship Maintenance and Modernization Cost Savings

    DTIC Science & Technology

    2015-03-21

    3 Navy Depot Maintenance Strategic Plan (2014– 2019 ... Tech Center in-sourcing initiative saves between $52 and $203 million in data system costs over the life of the project. The Army claims in...maintenance budgets at the DOD and the Navy are highlighted, and the Navy Depot Maintenance Strategic Plan (2014– 2019 ) is introduced. The Problem

  1. Space station orbit maintenance

    NASA Technical Reports Server (NTRS)

    Kaplan, D. I.; Jones, R. M.

    1983-01-01

    The orbit maintenance problem is examined for two low-earth-orbiting space station concepts - the large, manned Space Operations Center (SOC) and the smaller, unmanned Science and Applications Space Platform (SASP). Atmospheric drag forces are calculated, and circular orbit altitudes are selected to assure a 90 day decay period in the event of catastrophic propulsion system failure. Several thrusting strategies for orbit maintenance are discussed. Various chemical and electric propulsion systems for orbit maintenance are compared on the basis of propellant resupply requirements, power requirements, Shuttle launch costs, and technology readiness.

  2. User Delay Cost Model and Facilities Maintenance Cost Model for a Terminal Control Area : Volume 3. User's Manual and Program Documentation for the Facilities Maintenance Cost Model

    DOT National Transportation Integrated Search

    1978-05-01

    The Facilities Maintenance Cost Model (FMCM) is an analytic model designed to calculate expected annual labor costs of maintenance within a given FAA maintenance sector. The model is programmed in FORTRAN IV and has been demonstrated on the CDC Krono...

  3. Summit Station Skiway Cost Analysis

    DTIC Science & Technology

    2016-07-01

    Laboratory (CRREL) U.S. Army Engineer Research and Development Center (ERDC) 72 Lyme Road Hanover, NH 03755-1290 Final Report Approved for...cargo loads. To explore further skiway improvement and cost saving techniques, this report reviews alternative maintenance and construction options...3 2.2 Maintenance

  4. Navy Occupational Health Information Management System (NOHIMS). Medical Exam Scheduling Module. Program Maintenance Manual

    DTIC Science & Technology

    1987-06-01

    NAVY OCCUPATIONAL HEALTH INFORMATION MANAGEMENT SYSTEM NOH I MS MEDICAL EXAM SCHEDULING MODULE PROGRAM MAINTENANCE MANUAL S JUNE 1987 DT11C 00... Information Management System (NOHIMS) ~ Medical Examination Scheduling (MES) Program Maintenance Manual 7. Author(s) 8. Performing Organization Rapt. No...the Navy Occupational Health Information Management System (NOHIMS). NOHIMS, whose initial version was developed at the Naval Health Research Center

  5. Real Time Maintenance Approval and Required IMMT Coordination

    NASA Technical Reports Server (NTRS)

    Burchell, S.

    2016-01-01

    Payloads are assessed for nominal operations. Payload Developers have the option of performing a maintenance hazard assessment (MHA) for potential maintenance activities. When POIC (Payload Operations and Integration Center) Safety reviews an OCR calling for a maintenance procedure, we cannot approve it without a MHA. If no MHA exists, we contact MER (Mission Evaluation Room) Safety. Depending on the nature of the problem, MER Safety has the option to: Analyze and grant approval themselves; Direct the payload back to the ISRP (Integrated Safety Review Panel); Direct the payload to the IMMT (Increment Mission Management Team).

  6. 42 CFR 493.1254 - Standard: Maintenance and function checks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Maintenance and function checks. 493.1254 Section 493.1254 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived...

  7. Data-Mining Toolset Developed for Determining Turbine Engine Part Life Consumption

    NASA Technical Reports Server (NTRS)

    Litt, Jonathan S.

    2003-01-01

    The current practice in aerospace turbine engine maintenance is to remove components defined as life-limited parts after a fixed time, on the basis of a predetermined number of flight cycles. Under this schedule-based maintenance practice, the worst-case usage scenario is used to determine the usable life of the component. As shown, this practice often requires removing a part before its useful life is fully consumed, thus leading to higher maintenance cost. To address this issue, the NASA Glenn Research Center, in a collaborative effort with Pratt & Whitney, has developed a generic modular toolset that uses data-mining technology to parameterize life usage models for maintenance purposes. The toolset enables a "condition-based" maintenance approach, where parts are removed on the basis of the cumulative history of the severity of operation they have experienced. The toolset uses data-mining technology to tune life-consumption models on the basis of operating and maintenance histories. The flight operating conditions, represented by measured variables within the engine, are correlated with repair records for the engines, generating a relationship between the operating condition of the part and its service life. As shown, with the condition-based maintenance approach, the lifelimited part is in service until its usable life is fully consumed. This approach will lower maintenance costs while maintaining the safety of the propulsion system. The toolset is a modular program that is easily customizable by users. First, appropriate parametric damage accumulation models, which will be functions of engine variables, must be defined. The tool then optimizes the models to match the historical data by computing an effective-cycle metric that reduces the unexplained variability in component life due to each damage mode by accounting for the variability in operational severity. The damage increment due to operating conditions experienced during each flight is used to compute the effective cycles and ultimately the replacement time. Utilities to handle data problems, such as gaps in the flight data records, are included in the toolset. The tool was demonstrated using the first stage, high-pressure turbine blade of the PW4077 engine (Pratt & Whitney, East Hartford, CT). The damage modes considered were thermomechanical fatigue and oxidation/erosion. Each PW4077 engine contains 82 first-stage, high-pressure turbine blades, and data from a fleet of engines were used to tune the life-consumption models. The models took into account not only measured variables within the engine, but also unmeasured variables such as engine health parameters that are affected by degradation of the engine due to aging. The tool proved effective at predicting the average number of blades scrapped over time due to each damage mode, per engine, given the operating history of the engine. The customizable tools are available to interested parties within the aerospace community.

  8. Cloud computing can simplify HIT infrastructure management.

    PubMed

    Glaser, John

    2011-08-01

    Software as a Service (SaaS), built on cloud computing technology, is emerging as the forerunner in IT infrastructure because it helps healthcare providers reduce capital investments. Cloud computing leads to predictable, monthly, fixed operating expenses for hospital IT staff. Outsourced cloud computing facilities are state-of-the-art data centers boasting some of the most sophisticated networking equipment on the market. The SaaS model helps hospitals safeguard against technology obsolescence, minimizes maintenance requirements, and simplifies management.

  9. Defense Resource Management Study. Case Studies of Logistics Support Alternatives

    DTIC Science & Technology

    1979-02-01

    repair turnaround for all work centers on the carrier was almost 10 days (excluding components in AWP status), and the percent- age of man-hours...division offices, etc.). Some of the other func- tions of the permanent party are concerned with the maintenance of AGE . PME. NDT, and VAST. 17 I 4 18...typically used in initial-provisioning stock- age requirements models. This kind of discrepancy would obviously cause stock short- ages . Those shortages are

  10. Understanding the Risk Factors of Trauma Center Closures

    PubMed Central

    Shen, Yu-Chu; Hsia, Renee Y.; Kuzma, Kristen

    2011-01-01

    Objectives We analyze whether hazard rates of shutting down trauma centers are higher due to financial pressures or in areas with vulnerable populations (such as minorities or the poor). Materials and Methods This is a retrospective study of all hospitals with trauma center services in urban areas in the continental US between 1990 and 2005, identified from the American Hospital Association Annual Surveys. These data were linked with Medicare cost reports, and supplemented with other sources, including the Area Resource File. We analyze the hazard rates of trauma center closures among several dimensions of risk factors using discrete-time proportional hazard models. Results The number of trauma center closures increased from 1990 to 2005, with a total of 339 during this period. The hazard rate of closing trauma centers in hospitals with a negative profit margin is 1.38 times higher than those hospitals without the negative profit margin (P < 0.01). Hospitals receiving more generous Medicare reimbursements face a lower hazard of shutting down trauma centers (ratio: 0.58, P < 0.01) than those receiving below average reimbursement. Hospitals in areas with higher health maintenance organizations penetration face a higher hazard of trauma center closure (ratio: 2.06, P < 0.01). Finally, hospitals in areas with higher shares of minorities face a higher risk of trauma center closure (ratio: 1.69, P < 0.01). Medicaid load and uninsured populations, however, are not risk factors for higher rates of closure after we control for other financial and community characteristics. Conclusions Our findings give an indication on how the current proposals to cut public spending could exacerbate the trauma closure particularly among areas with high shares of minorities. In addition, given the negative effect of health maintenance organizations on trauma center survival, the growth of Medicaid managed care population should be monitored. Finally, high shares of Medicaid or uninsurance by themselves are not independent risk factors for higher closure as long as financial pressures are mitigated. Targeted policy interventions and further research on the causes, are needed to address these systems-level disparities. PMID:19704354

  11. Understanding the risk factors of trauma center closures: do financial pressure and community characteristics matter?

    PubMed

    Shen, Yu-Chu; Hsia, Renee Y; Kuzma, Kristen

    2009-09-01

    We analyze whether hazard rates of shutting down trauma centers are higher due to financial pressures or in areas with vulnerable populations (such as minorities or the poor). This is a retrospective study of all hospitals with trauma center services in urban areas in the continental US between 1990 and 2005, identified from the American Hospital Association Annual Surveys. These data were linked with Medicare cost reports, and supplemented with other sources, including the Area Resource File. We analyze the hazard rates of trauma center closures among several dimensions of risk factors using discrete-time proportional hazard models. The number of trauma center closures increased from 1990 to 2005, with a total of 339 during this period. The hazard rate of closing trauma centers in hospitals with a negative profit margin is 1.38 times higher than those hospitals without the negative profit margin (P < 0.01). Hospitals receiving more generous Medicare reimbursements face a lower hazard of shutting down trauma centers (ratio: 0.58, P < 0.01) than those receiving below average reimbursement. Hospitals in areas with higher health maintenance organizations penetration face a higher hazard of trauma center closure (ratio: 2.06, P < 0.01). Finally, hospitals in areas with higher shares of minorities face a higher risk of trauma center closure (ratio: 1.69, P < 0.01). Medicaid load and uninsured populations, however, are not risk factors for higher rates of closure after we control for other financial and community characteristics. Our findings give an indication on how the current proposals to cut public spending could exacerbate the trauma closure particularly among areas with high shares of minorities. In addition, given the negative effect of health maintenance organizations on trauma center survival, the growth of Medicaid managed care population should be monitored. Finally, high shares of Medicaid or uninsurance by themselves are not independent risk factors for higher closure as long as financial pressures are mitigated. Targeted policy interventions and further research on the causes, are needed to address these systems-level disparities.

  12. Multifactorial analysis of renal transplants reported to the United Network for Organ Sharing Registry: a 1994 update.

    PubMed

    Gjertson, D W

    1994-01-01

    1. From a multivariate log-linear analysis of 57,303 renal transplants between 1988 and 1994, the top 10 factors influencing one-year and 3-year cadaveric graft survival rates were ranked as follows: [table: see text] 2. Center effects accounted for 30% and 28% of all assignable variations in one-year and 3-year outcomes, respectively. Although center variation dominated 32 other variables, most factors were relatively independent of transplant center. 3. Novel to our own multifactorial analyses of the UNOS Kidney Transplant Registry were 6 pretransplant factors (recipient pretransplant dialysis, pregnancy, PRA technique, donor disposition and preservation, and ABO compatibility). Survival rates over the various combinations of these new factors were not significantly different. 4. For the first time in our multivariate analyses, 4 posttransplantation factors (delayed graft function, rejection episodes prior to discharge, induction and maintenance drug therapies) were included in the log-linear model. It is noteworthy that graft survival in both transplant periods was seriously imperiled following delayed graft function or rejection prior to discharge, yet the accounting for these pseudo-outcome variables did not alter the influence of the remaining 31 transplant factors. Finally, maintenance drug therapies strongly influenced short-term outcomes but did not influence long-term results, except for a noteworthy trend toward increased survival rates for FK506 therapy.

  13. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    Progress report on current status of computer software management and information center (COSMIC) includes the following areas: inventory, evaluation and publication, marketing, customer service, maintenance and support, and budget summary.

  14. Preventive Maintenance Process

    NASA Technical Reports Server (NTRS)

    Ciaruffoli, Veronica; Bramley, Craig; Matteson, Mike

    2001-01-01

    The Preventive Maintenance (PM) program at Stennis Space Center (SSC) evolved from an ineffective and poorly organized state to a highly organized state in which it became capable of tracking equipment, planning jobs with man hour estimates, and supporting outsourcing. This viewgraph presentation traces the steps the program took to improve itself.

  15. Employability Project: The Employment of Persons with Developmental Disabilities.

    ERIC Educational Resources Information Center

    Watson, Marge

    The paper describes the efforts of Stepping Stones Growth Center, a vocational training organization which places persons with developmental disabilities into competitive employment. Two programs within Stepping Stones feature training for boat maintenance and janitorial and grounds maintenance. Placement preparation is described in terms of its…

  16. Navy Occupational Health Information Management System (NOHIMS). System-Wide Module. Program Maintenance Manual

    DTIC Science & Technology

    1987-06-01

    NAVY OCCUPATIONAL HEALTH INFORMATION MANAGEMENT SYSTEM NOHIMS SYSTEM-WIDE MODULE PROGRAM MAINTENANCE MANUAL JUNE 1987 DTIC 00 SEP I 21988DJ 0) 4... INFORMATION MANAGEMENT SYSTEM (NOHIMS) N 1.98 SYSTEM-WIDE MODULE PROGRAM MAINTENANCE MANUAL 7. Author(s) a. Performing Organization Rapt. No. MITRE... Management System (NOHIMS). NORIMS, whose initial version was ,eveloped at the Naval Health Research Center (NHRC), is a composite of 4 -’o subsystems: an

  17. Evaluation of the towplow for Caltrans operations.

    DOT National Transportation Integrated Search

    2015-09-30

    Caltrans requested that the Advanced Highway Maintenance and Construction Technology Research Center (AHMCT) research center configure, procure, and deploy two Viking-Cives TowPlow systems and conduct an extensive evaluation to determine the most ben...

  18. A probabilistic maintenance model for diesel engines

    NASA Astrophysics Data System (ADS)

    Pathirana, Shan; Abeygunawardane, Saranga Kumudu

    2018-02-01

    In this paper, a probabilistic maintenance model is developed for inspection based preventive maintenance of diesel engines based on the practical model concepts discussed in the literature. Developed model is solved using real data obtained from inspection and maintenance histories of diesel engines and experts' views. Reliability indices and costs were calculated for the present maintenance policy of diesel engines. A sensitivity analysis is conducted to observe the effect of inspection based preventive maintenance on the life cycle cost of diesel engines.

  19. 42 CFR 483.138 - Maintenance of services and availability of FFP.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Maintenance of services and availability of FFP. 483.138 Section 483.138 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION REQUIREMENTS FOR STATES AND LONG TERM CARE...

  20. 42 CFR 483.138 - Maintenance of services and availability of FFP.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Maintenance of services and availability of FFP. 483.138 Section 483.138 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION REQUIREMENTS FOR STATES AND LONG TERM CARE...

  1. 42 CFR 483.138 - Maintenance of services and availability of FFP.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Maintenance of services and availability of FFP. 483.138 Section 483.138 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION REQUIREMENTS FOR STATES AND LONG TERM CARE...

  2. 42 CFR 483.138 - Maintenance of services and availability of FFP.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Maintenance of services and availability of FFP. 483.138 Section 483.138 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION REQUIREMENTS FOR STATES AND LONG TERM CARE...

  3. 42 CFR 483.138 - Maintenance of services and availability of FFP.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Maintenance of services and availability of FFP. 483.138 Section 483.138 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION REQUIREMENTS FOR STATES AND LONG TERM CARE...

  4. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  5. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  6. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  7. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... electronic equivalent, to— DLA Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue... Maintenance of the CAGE file. (a) DLA Logistics Information Service will accept written requests for changes...) Additional guidance for maintaining CAGE codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information...

  8. 39. Perimeter acquisition radar building room #504, techinal maintenance and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. Perimeter acquisition radar building room #504, techinal maintenance and repair center (TMRC) and tactical support equipment (TSE) storage area; storage-travel wave tubes - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

  9. Optimizing preventive maintenance policy: A data-driven application for a light rail braking system.

    PubMed

    Corman, Francesco; Kraijema, Sander; Godjevac, Milinko; Lodewijks, Gabriel

    2017-10-01

    This article presents a case study determining the optimal preventive maintenance policy for a light rail rolling stock system in terms of reliability, availability, and maintenance costs. The maintenance policy defines one of the three predefined preventive maintenance actions at fixed time-based intervals for each of the subsystems of the braking system. Based on work, maintenance, and failure data, we model the reliability degradation of the system and its subsystems under the current maintenance policy by a Weibull distribution. We then analytically determine the relation between reliability, availability, and maintenance costs. We validate the model against recorded reliability and availability and get further insights by a dedicated sensitivity analysis. The model is then used in a sequential optimization framework determining preventive maintenance intervals to improve on the key performance indicators. We show the potential of data-driven modelling to determine optimal maintenance policy: same system availability and reliability can be achieved with 30% maintenance cost reduction, by prolonging the intervals and re-grouping maintenance actions.

  10. Optimizing preventive maintenance policy: A data-driven application for a light rail braking system

    PubMed Central

    Corman, Francesco; Kraijema, Sander; Godjevac, Milinko; Lodewijks, Gabriel

    2017-01-01

    This article presents a case study determining the optimal preventive maintenance policy for a light rail rolling stock system in terms of reliability, availability, and maintenance costs. The maintenance policy defines one of the three predefined preventive maintenance actions at fixed time-based intervals for each of the subsystems of the braking system. Based on work, maintenance, and failure data, we model the reliability degradation of the system and its subsystems under the current maintenance policy by a Weibull distribution. We then analytically determine the relation between reliability, availability, and maintenance costs. We validate the model against recorded reliability and availability and get further insights by a dedicated sensitivity analysis. The model is then used in a sequential optimization framework determining preventive maintenance intervals to improve on the key performance indicators. We show the potential of data-driven modelling to determine optimal maintenance policy: same system availability and reliability can be achieved with 30% maintenance cost reduction, by prolonging the intervals and re-grouping maintenance actions. PMID:29278245

  11. Prospective Relations between Social Comparison Orientation and Weight Loss Outcomes.

    PubMed

    Arigo, Danielle; Butryn, Meghan L

    2018-06-26

    Maintenance of weight loss after behavioral intervention tends to be poor, and there is need for an improved understanding of factors that are associated with successful maintenance. Social comparison is known to be a powerful influence on treatment outcomes for group-based behavioral weight loss programs, but little is known about the role of individual differences in social comparison orientation (i.e., tendency to value comparison information) in this context. The goal of this study was to examine prospective relations between social comparison orientation and long-term weight loss outcomes (percent weight loss, aerobic-intensity physical activity) among participants in behavioral weight loss treatment. Participants (n = 161, M Age = 54, M BMI = 34.4░kg/m 2 ) completed a measure of social comparison orientation at pre-treatment baseline. Height and weight were measured in the research center and aerobic-intensity physical activity was assessed via accelerometer at baseline, mid- and end-of-treatment, and at 6 and 12 months post-treatment (representing maintenance). Multilevel models tested prospective relations between comparison orientation and treatment outcomes over time, with emphasis on differences during the post-treatment maintenance phase. Stronger (vs. weaker) general comparison orientation was associated with better maintenance of aerobic-intensity physical activity. However, stronger (vs. weaker) orientation toward comparisons with better-off others (i.e., upward comparison) was associated with less weight loss success during and after treatment. Social comparison orientation thus shows meaningful relations with long-term maintenance of key outcomes in group-based behavioral weight loss treatment, and warrants further investigation in this context.

  12. Advanced Maintenance Simulation by Means of Hand-Based Haptic Interfaces

    NASA Astrophysics Data System (ADS)

    Nappi, Michele; Paolino, Luca; Ricciardi, Stefano; Sebillo, Monica; Vitiello, Giuliana

    Aerospace industry has been involved in virtual simulation for design and testing since the birth of virtual reality. Today this industry is showing a growing interest in the development of haptic-based maintenance training applications, which represent the most advanced way to simulate maintenance and repair tasks within a virtual environment by means of a visual-haptic approach. The goal is to allow the trainee to experiment the service procedures not only as a workflow reproduced at a visual level but also in terms of the kinaesthetic feedback involved with the manipulation of tools and components. This study, conducted in collaboration with aerospace industry specialists, is aimed to the development of an immersive virtual capable of immerging the trainees into a virtual environment where mechanics and technicians can perform maintenance simulation or training tasks by directly manipulating 3D virtual models of aircraft parts while perceiving force feedback through the haptic interface. The proposed system is based on ViRstperson, a virtual reality engine under development at the Italian Center for Aerospace Research (CIRA) to support engineering and technical activities such as design-time maintenance procedure validation, and maintenance training. This engine has been extended to support haptic-based interaction, enabling a more complete level of interaction, also in terms of impedance control, and thus fostering the development of haptic knowledge in the user. The user’s “sense of touch” within the immersive virtual environment is simulated through an Immersion CyberForce® hand-based force-feedback device. Preliminary testing of the proposed system seems encouraging.

  13. Developing a Family-Centered Care Model for Critical Care After Pediatric Traumatic Brain Injury.

    PubMed

    Moore, Megan; Robinson, Gabrielle; Mink, Richard; Hudson, Kimberly; Dotolo, Danae; Gooding, Tracy; Ramirez, Alma; Zatzick, Douglas; Giordano, Jessica; Crawley, Deborah; Vavilala, Monica S

    2015-10-01

    This study examined the family experience of critical care after pediatric traumatic brain injury in order to develop a model of specific factors associated with family-centered care. Qualitative methods with semi-structured interviews were used. Two level 1 trauma centers. Fifteen mothers of children who had an acute hospital stay after traumatic brain injury within the last 5 years were interviewed about their experience of critical care and discharge planning. Participants who were primarily English, Spanish, or Cantonese speaking were included. None. Content analysis was used to code the transcribed interviews and develop the family-centered care model. Three major themes emerged: 1) thorough, timely, compassionate communication, 2) capacity building for families, providers, and facilities, and 3) coordination of care transitions. Participants reported valuing detailed, frequent communication that set realistic expectations and prepared them for decision making and outcomes. Areas for capacity building included strategies to increase provider cultural humility, parent participation in care, and institutional flexibility. Coordinated care transitions, including continuity of information and maintenance of partnerships with families and care teams, were highlighted. Participants who were not primarily English speaking reported particular difficulty with communication, cultural understanding, and coordinated transitions. This study presents a family-centered traumatic brain injury care model based on family perspectives. In addition to communication and coordination strategies, the model offers methods to address cultural and structural barriers to meeting the needs of non-English-speaking families. Given the stress experienced by families of children with traumatic brain injury, careful consideration of the model themes identified here may assist in improving overall quality of care to families of hospitalized children with traumatic brain injury.

  14. Research and Operational Support for the Study of Militarily Relevant Infectious Diseases of Interest to the United States Army and the Royal Thai Army

    DTIC Science & Technology

    2007-01-01

    sporozoites from P. vivax specimens obtained from throughout the world . These sporozoites could then be used in a variety of experimental models (i.e., we...maintenance of a center for excellence focused on the basic biology and epidemiology of malaria. 31 2. To assess emerging febrile diseases along...classical and state- of -the-art technologies as possible to the above multi-faceted research. Clinical research included mobile epidemiology team able to

  15. An Analytical Performance Assessment of a Fuel Cell-powered, Small Electric Airplane

    NASA Technical Reports Server (NTRS)

    Berton, Jeffrey J.; Freeh, Joshua E.; Wickenheiser, Timothy J.

    2003-01-01

    Rapidly emerging fuel cell power technologies may be used to launch a new revolution of electric propulsion systems for light aircraft. Future small electric airplanes using fuel cell technologies hold the promise of high reliability, low maintenance, low noise, and with exception of water vapor zero emissions. This paper describes an analytical feasibility and performance assessment conducted by NASA's Glenn Research Center of a fuel cell-powered, propeller-driven, small electric airplane based on a model of the MCR 01 two-place kitplane.

  16. Software framework for prognostic health monitoring of ocean-based power generation

    NASA Astrophysics Data System (ADS)

    Bowren, Mark

    On August 5, 2010 the U.S. Department of Energy (DOE) has designated the Center for Ocean Energy Technology (COET) at Florida Atlantic University (FAU) as a national center for ocean energy research and development of prototypes for open-ocean power generation. Maintenance on ocean-based machinery can be very costly. To avoid unnecessary maintenance it is necessary to monitor the condition of each machine in order to predict problems. This kind of prognostic health monitoring (PHM) requires a condition-based maintenance (CBM) system that supports diagnostic and prognostic analysis of large amounts of data. Research in this field led to the creation of ISO13374 and the development of a standard open-architecture for machine condition monitoring. This thesis explores an implementation of such a system for ocean-based machinery using this framework and current open-standard technologies.

  17. Performance-based maintenance of gas turbines for reliable control of degraded power systems

    NASA Astrophysics Data System (ADS)

    Mo, Huadong; Sansavini, Giovanni; Xie, Min

    2018-03-01

    Maintenance actions are necessary for ensuring proper operations of control systems under component degradation. However, current condition-based maintenance (CBM) models based on component health indices are not suitable for degraded control systems. Indeed, failures of control systems are only determined by the controller outputs, and the feedback mechanism compensates the control performance loss caused by the component deterioration. Thus, control systems may still operate normally even if the component health indices exceed failure thresholds. This work investigates the CBM model of control systems and employs the reduced control performance as a direct degradation measure for deciding maintenance activities. The reduced control performance depends on the underlying component degradation modelled as a Wiener process and the feedback mechanism. To this aim, the controller features are quantified by developing a dynamic and stochastic control block diagram-based simulation model, consisting of the degraded components and the control mechanism. At each inspection, the system receives a maintenance action if the control performance deterioration exceeds its preventive-maintenance or failure thresholds. Inspired by realistic cases, the component degradation model considers random start time and unit-to-unit variability. The cost analysis of maintenance model is conducted via Monte Carlo simulation. Optimal maintenance strategies are investigated to minimize the expected maintenance costs, which is a direct consequence of the control performance. The proposed framework is able to design preventive maintenance actions on a gas power plant, to ensuring required load frequency control performance against a sudden load increase. The optimization results identify the trade-off between system downtime and maintenance costs as a function of preventive maintenance thresholds and inspection frequency. Finally, the control performance-based maintenance model can reduce maintenance costs as compared to CBM and pre-scheduled maintenance.

  18. Effectiveness of Relapse Prevention Cognitive-Behavioral Model in Opioid-Dependent Patients Participating in the Methadone Maintenance Treatment in Iran

    PubMed Central

    PASHAEI, Tahereh; SHOJAEIZADEH, Davoud; RAHIMI FOROUSHANI, Abbas; GHAZITABATABAE, Mahmoud; MOEENI, Maryam; RAJATI, Fatemeh; M RAZZAGHI, Emran

    2013-01-01

    Background: To evaluate the effectiveness of a relapse prevention cognitive-behavioral model, based on Marlatt treatment approach, in Opioid-dependent patients participating in the Methadone Maintenance Treatment (MMT) in Iran. Methods: The study consisted of 92 individuals treated with methadone in Iranian National Center of Addiction Studies (INCAS). Participants were randomized into two groups: educational intervention group (N=46) and control group (N=46). The intervention was comprised of 10 weekly 90 minute sessions, done during a period of 2.5 months based on the most high risk situations determined using Inventory Drug Taking Situation instrument. Relapse was defined as not showing up for MMT, drug use for at least 5 continuous days, and a positive urinary morphine test. Results: While, only 36.4% of the intervention group relapsed into drug use, 63.6% of the control group relapsed. The result of the logistic regressions showed that the odd ratio of the variable of intervention program for the entire follow up period was 0.43 (P<0.01). Further, the odd ratio of this variable in one month, three months, and 195 days after the therapy were 0.48 (P<.03), 0.31 (P<.02), and 0.13 (P<.02) respectively that revealed that on average, the probability of relapse among individuals in the intervention group was lower than patients in control group Conclusion: Relapse prevention model based on Marlatt treatment approach has an effective role in decreasing relapse rate. This model can be introduced as a complementary therapy in patients treated with methadone maintenance. PMID:26056645

  19. Effectiveness of Relapse Prevention Cognitive-Behavioral Model in Opioid-Dependent Patients Participating in the Methadone Maintenance Treatment in Iran.

    PubMed

    Pashaei, Tahereh; Shojaeizadeh, Davoud; Rahimi Foroushani, Abbas; Ghazitabatabae, Mahmoud; Moeeni, Maryam; Rajati, Fatemeh; M Razzaghi, Emran

    2013-08-01

    To evaluate the effectiveness of a relapse prevention cognitive-behavioral model, based on Marlatt treatment approach, in Opioid-dependent patients participating in the Methadone Maintenance Treatment (MMT) in Iran. The study consisted of 92 individuals treated with methadone in Iranian National Center of Addiction Studies (INCAS). Participants were randomized into two groups: educational intervention group (N=46) and control group (N=46). The intervention was comprised of 10 weekly 90 minute sessions, done during a period of 2.5 months based on the most high risk situations determined using Inventory Drug Taking Situation instrument. Relapse was defined as not showing up for MMT, drug use for at least 5 continuous days, and a positive urinary morphine test. While, only 36.4% of the intervention group relapsed into drug use, 63.6% of the control group relapsed. The result of the logistic regressions showed that the odd ratio of the variable of intervention program for the entire follow up period was 0.43 (P<0.01). Further, the odd ratio of this variable in one month, three months, and 195 days after the therapy were 0.48 (P<.03), 0.31 (P<.02), and 0.13 (P<.02) respectively that revealed that on average, the probability of relapse among individuals in the intervention group was lower than patients in control group. Relapse prevention model based on Marlatt treatment approach has an effective role in decreasing relapse rate. This model can be introduced as a complementary therapy in patients treated with methadone maintenance.

  20. Optimal maintenance of a multi-unit system under dependencies

    NASA Astrophysics Data System (ADS)

    Sung, Ho-Joon

    The availability, or reliability, of an engineering component greatly influences the operational cost and safety characteristics of a modern system over its life-cycle. Until recently, the reliance on past empirical data has been the industry-standard practice to develop maintenance policies that provide the minimum level of system reliability. Because such empirically-derived policies are vulnerable to unforeseen or fast-changing external factors, recent advancements in the study of topic on maintenance, which is known as optimal maintenance problem, has gained considerable interest as a legitimate area of research. An extensive body of applicable work is available, ranging from those concerned with identifying maintenance policies aimed at providing required system availability at minimum possible cost, to topics on imperfect maintenance of multi-unit system under dependencies. Nonetheless, these existing mathematical approaches to solve for optimal maintenance policies must be treated with caution when considered for broader applications, as they are accompanied by specialized treatments to ease the mathematical derivation of unknown functions in both objective function and constraint for a given optimal maintenance problem. These unknown functions are defined as reliability measures in this thesis, and theses measures (e.g., expected number of failures, system renewal cycle, expected system up time, etc.) do not often lend themselves to possess closed-form formulas. It is thus quite common to impose simplifying assumptions on input probability distributions of components' lifetime or repair policies. Simplifying the complex structure of a multi-unit system to a k-out-of-n system by neglecting any sources of dependencies is another commonly practiced technique intended to increase the mathematical tractability of a particular model. This dissertation presents a proposal for an alternative methodology to solve optimal maintenance problems by aiming to achieve the same end-goals as Reliability Centered Maintenance (RCM). RCM was first introduced to the aircraft industry in an attempt to bridge the gap between the empirically-driven and theory-driven approaches to establishing optimal maintenance policies. Under RCM, qualitative processes that enable the prioritizing of functions based on the criticality and influence would be combined with mathematical modeling to obtain the optimal maintenance policies. Where this thesis work deviates from RCM is its proposal to directly apply quantitative processes to model the reliability measures in optimal maintenance problem. First, Monte Carlo (MC) simulation, in conjunction with a pre-determined Design of Experiments (DOE) table, can be used as a numerical means of obtaining the corresponding discrete simulated outcomes of the reliability measures based on the combination of decision variables (e.g., periodic preventive maintenance interval, trigger age for opportunistic maintenance, etc.). These discrete simulation results can then be regressed as Response Surface Equations (RSEs) with respect to the decision variables. Such an approach to represent the reliability measures with continuous surrogate functions (i.e., the RSEs) not only enables the application of the numerical optimization technique to solve for optimal maintenance policies, but also obviates the need to make mathematical assumptions or impose over-simplifications on the structure of a multi-unit system for the sake of mathematical tractability. The applicability of the proposed methodology to a real-world optimal maintenance problem is showcased through its application to a Time Limited Dispatch (TLD) of Full Authority Digital Engine Control (FADEC) system. In broader terms, this proof-of-concept exercise can be described as a constrained optimization problem, whose objective is to identify the optimal system inspection interval that guarantees a certain level of availability for a multi-unit system. A variety of reputable numerical techniques were used to model the problem as accurately as possible, including algorithms for the MC simulation, imperfect maintenance model from quasi renewal processes, repair time simulation, and state transition rules. Variance Reduction Techniques (VRTs) were also used in an effort to enhance MC simulation efficiency. After accurate MC simulation results are obtained, the RSEs are generated based on the goodness-of-fit measure to yield as parsimonious model as possible to construct the optimization problem. Under the assumption of constant failure rate for lifetime distributions, the inspection interval from the proposed methodology was found to be consistent with the one from the common approach used in industry that leverages Continuous Time Markov Chain (CTMC). While the latter does not consider maintenance cost settings, the proposed methodology enables an operator to consider different types of maintenance cost settings, e.g., inspection cost, system corrective maintenance cost, etc., to result in more flexible maintenance policies. When the proposed methodology was applied to the same TLD of FADEC example, but under the more generalized assumption of strictly Increasing Failure Rate (IFR) for lifetime distribution, it was shown to successfully capture component wear-out, as well as the economic dependencies among the system components.

  1. Using Implementation and Dissemination Concepts to Spread 21st-century Well-Child Care at a Health Maintenance Organization

    PubMed Central

    Beck, Arne; Bergman, David A; Rahm, Alanna K; Dearing, James W; Glasgow, Russell E

    2009-01-01

    We describe here the use of a conceptual framework for implementing and disseminating in a Health Maintenance Organization an evidence-based model of well-child care (WCC) that includes developmental and preventive services recommended by the American Academy of Pediatrics. Twenty-first Century WCC is a parent-centered, team-based, primary care model that combines online previsit assessments—completed by parents and caregivers regarding clinic-based weight, growth, and development assessments—with vaccinations and anticipatory guidance. Nurses, nurse practitioners, developmental specialists, and pediatricians all play roles in the WCC model. Patient and clinician interaction, health records, and resources are all facilitated through a Web-based diagnostic, management, tracking, and resource information tool. Implementation and dissemination concepts and their attendant practices and tools can reliably be used to augment strategic decisions about how to best disseminate and implement innovations in health care delivery. Unlike innovations that are embedded only in technical systems, validated models of team-based health care have multiple components that must be made compatible with complex sociotechnical systems. Interpersonal communication, work, coordination, and judgment are key processes that affect implementation quality. Implementation can involve tailoring to a particular site and customizing either the model or the organizational context to accommodate it. PMID:20740083

  2. Fault management for the Space Station Freedom control center

    NASA Technical Reports Server (NTRS)

    Clark, Colin; Jowers, Steven; Mcnenny, Robert; Culbert, Chris; Kirby, Sarah; Lauritsen, Janet

    1992-01-01

    This paper describes model based reasoning fault isolation in complex systems using automated digraph analysis. It discusses the use of the digraph representation as the paradigm for modeling physical systems and a method for executing these failure models to provide real-time failure analysis. It also discusses the generality, ease of development and maintenance, complexity management, and susceptibility to verification and validation of digraph failure models. It specifically describes how a NASA-developed digraph evaluation tool and an automated process working with that tool can identify failures in a monitored system when supplied with one or more fault indications. This approach is well suited to commercial applications of real-time failure analysis in complex systems because it is both powerful and cost effective.

  3. Going Paperless

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Sentel Corporation has commercialized NASA's Electronic Portable Information Collection (EPIC) System, which stemmed from a NASA Kennedy Space Center SBIR contract. NASA and Sentel designed, built, and tested work authorization procedures used as a paperless procedures system for Space Shuttle and International Space Station payload processing operations. EPIC is now being applied to various markets including; airplane maintenance, aerospace system data management, shipbuilding industries, shipping industries, law enforcement agencies, and public utilities. KSC is planning a pilot program to use EPIC at the Hypergol Maintenance Facility. In addition, Ames Research Center and KSC are working together to apply EPIC to the area of wireless communication.

  4. Prevalence, Formation, Maintenance, and Evaluation of Interdisciplinary Student Aging Interest Groups

    ERIC Educational Resources Information Center

    Jones, Katherine J.; Vandenberg, Edward V.; Bottsford, Lisa

    2011-01-01

    The authors describe the prevalence, formation, maintenance, and evaluation of student aging interest groups. They conducted a cross-sectional electronic survey of the 46 academic medical centers funded by the Donald W. Reynolds Foundation. To evaluate their group of approximately 50 students, the authors conducted an electronic pretest and…

  5. 78 FR 11889 - Notice of Meeting of the ICD-9-CM Coordination and Maintenance Committee; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-20

    ... of the meeting announcement should read as follows: Notice of Meeting of the ICD-9-CM Coordination and Maintenance Committee. The first sentence of the notice should read as follows: National Center for Health Statistics (NCHS), Classifications and Public Health Data Standards Staff announces the...

  6. FLIGHT LINE, LOOKING TOWARD FLIGHT LINE FIRE STATION (BUILDING 2748)CENTER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLIGHT LINE, LOOKING TOWARD FLIGHT LINE FIRE STATION (BUILDING 2748)CENTER AND AIRCRAFT MAINTENANCE DOCKS (BUILDINGS 2741 AND 2766)LEFT. VIEW TO NORTH - Plattsburgh Air Force Base, U.S. Route 9, Plattsburgh, Clinton County, NY

  7. Final Environmental Impact Statement: Disposal and Reuse of Carswell Air Force Base, Texas

    DTIC Science & Technology

    1994-07-01

    maintenance shops, airfield infrastructure, medical clinic, and child care center. New construction would include a reserve training center, guard...includes a private cemetery and a child care center. The cemetery would be left undisturbed and the child care center would be converted for a city hall... child care center, and a floodplain associated with Farmers Branch Creek. The golf course area could be reused soon after disposal of the property

  8. Experimental adoption of RCM in EDF substations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Heroin, G.; Aupied, J.; Sanchis, G.

    1996-08-01

    EDF, after testing Reliability Centered Maintenance (RCM) on systems used in nuclear power plants, has now successfully extended RCM to all of its nuclear power plants. In the light of this experience, EDF has committed itself to a pilot study on a line bay of a 400 kV substation in 1992. The RCM method as applied benefited from EDF`s policy of maintenance, introduced five years ago on all substations, which has enhanced prospects of reliability. The original feature in the selection of maintenance tasks was that it brought into play two criteria for failure assessment - frequency and seriousness -more » and two criteria for maintenance task selection - efficiency and facility. The final outcome of RCM as applied to substation maintenance is to categorize maintenance tasks into: (1) essential maintenance tasks, (2) optional tasks, depending on the type and location of the substation, as well as on factors relating to local management of maintenance policy, and (3) unnecessary tasks.« less

  9. Android platform based smartphones for a logistical remote association repair framework.

    PubMed

    Lien, Shao-Fan; Wang, Chun-Chieh; Su, Juhng-Perng; Chen, Hong-Ming; Wu, Chein-Hsing

    2014-06-25

    The maintenance of large-scale systems is an important issue for logistics support planning. In this paper, we developed a Logistical Remote Association Repair Framework (LRARF) to aid repairmen in keeping the system available. LRARF includes four subsystems: smart mobile phones, a Database Management System (DBMS), a Maintenance Support Center (MSC) and wireless networks. The repairman uses smart mobile phones to capture QR-codes and the images of faulty circuit boards. The captured QR-codes and images are transmitted to the DBMS so the invalid modules can be recognized via the proposed algorithm. In this paper, the Linear Projective Transform (LPT) is employed for fast QR-code calibration. Moreover, the ANFIS-based data mining system is used for module identification and searching automatically for the maintenance manual corresponding to the invalid modules. The inputs of the ANFIS-based data mining system are the QR-codes and image features; the output is the module ID. DBMS also transmits the maintenance manual back to the maintenance staff. If modules are not recognizable, the repairmen and center engineers can obtain the relevant information about the invalid modules through live video. The experimental results validate the applicability of the Android-based platform in the recognition of invalid modules. In addition, the live video can also be recorded synchronously on the MSC for later use.

  10. Modeling a maintenance simulation of the geosynchronous platform

    NASA Technical Reports Server (NTRS)

    Kleiner, A. F., Jr.

    1980-01-01

    A modeling technique used to conduct a simulation study comparing various maintenance routines for a space platform is dicussed. A system model is described and illustrated, the basic concepts of a simulation pass are detailed, and sections on failures and maintenance are included. The operation of the system across time is best modeled by a discrete event approach with two basic events - failure and maintenance of the system. Each overall simulation run consists of introducing a particular model of the physical system, together with a maintenance policy, demand function, and mission lifetime. The system is then run through many passes, each pass corresponding to one mission and the model is re-initialized before each pass. Statistics are compiled at the end of each pass and after the last pass a report is printed. Items of interest typically include the time to first maintenance, total number of maintenance trips for each pass, average capability of the system, etc.

  11. Comparison of Antivenom Dosing Strategies for Rattlesnake Envenomation.

    PubMed

    Spyres, Meghan B; Skolnik, Aaron B; Moore, Elizabeth C; Gerkin, Richard D; Padilla-Jones, Angela; Ruha, Anne-Michelle

    2018-06-01

    This study compares maintenance with clinical- and laboratory-triggered (as-needed [PRN]) antivenom dosing strategies with regard to patient-centered outcomes after rattlesnake envenomation. This is a retrospective cohort study of adult rattlesnake envenomations treated at a regional toxicology center. Data on demographics, envenomation details, antivenom administration, length of stay, and laboratory and clinical outcomes were compared between the PRN and maintenance groups. Primary outcomes were hospital length of stay and total antivenom used, with a hypothesis of no difference between the two dosing strategies. A single regional toxicology center PATIENTS:: Three-hundred ten adult patients envenomated by rattlesnakes between 2007 and 2014 were included. Patients were excluded if no antivenom was administered or for receiving an antivenom other than Crofab (BTG International, West Conshohocken, PA). This is a retrospective study of rattlesnake envenomations treated with and without maintenance antivenom dosing. One-hundred forty-eight in the maintenance group and 162 in the PRN group were included. There was no difference in demographics or baseline envenomation severity or hemotoxicity (32.7% vs 40.5%; respectively; p = 0.158) between the two groups. Comparing the PRN with the maintenance group, less antivenom was used (8 [interquartile range, 6-12] vs 16 [interquartile range, 12-18] vials, respectively; p < 0.001), and hospital length of stay was shorter (27 hr [interquartile range, 20-44 hr] vs 34 hr [interquartile range, 24-43 hr], respectively; p = 0.014). There were no differences in follow-up outcomes of readmission, retreatment, or bleeding and surgical complications. Hospital length of stay was shorter, and less antivenom was used in patients receiving a PRN antivenom dosing strategy after rattlesnake envenomation.

  12. 20 CFR 670.200 - Who decides where Job Corps centers will be located?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 4 2014-04-01 2014-04-01 false Who decides where Job Corps centers will be... LABOR (CONTINUED) THE JOB CORPS UNDER TITLE I OF THE WORKFORCE INVESTMENT ACT Site Selection and Protection and Maintenance of Facilities § 670.200 Who decides where Job Corps centers will be located? (a...

  13. 42 CFR 476.72 - Review of the quality of care of risk-basis health maintenance organizations and competitive...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Review of the quality of care of risk-basis health maintenance organizations and competitive medical plans. 476.72 Section 476.72 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT...

  14. A Theoretical Reassessment of Microbial Maintenance and Implications for Microbial Ecology Modeling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wang, Gangsheng; Post, Wilfred M

    We attempted to reconcile three microbial maintenance models (Herbert, Pirt, and Compromise) through a critical reassessment. We provided a rigorous proof that the true growth yield coefficient (YG) is the ratio of the specific maintenance rate (a in Herbert) to the maintenance coefficient (m in Pirt). Other findings from this study include: (1) the Compromise model is identical to the Herbert for computing microbial growth and substrate consumption, but it expresses the dependence of maintenance on both microbial biomass and substrate; (2) the maximum specific growth rate in the Herbert ( max,H) is higher than those in the other twomore » models ( max,P and max,C), and the difference is the physiological maintenance factor (mq = a); and (3) the overall maintenance coefficient (mT) is more sensitive to mq than to the specific growth rate ( G) and YG. Our critical reassessment of microbial maintenance provides a new approach for quantifying some important components in soil microbial ecology models.« less

  15. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - U.S. COAST GUARD AVIATION TRAINING CENTER - MOBILE, AL

    EPA Science Inventory

    An assessment of pollution prevention opportunities at the U.S. Coast Guard Aviation Training Center in Mobile, AL, identified waste reduction opportunities in five major processing areas: flight simulator operation, aircraft maintenance, aircraft fueling, aircraft washing, and...

  16. The Fiber Optic Connection.

    ERIC Educational Resources Information Center

    Reese, Susan

    2003-01-01

    Describes the fiber optics programs at the Career and Technical Center in Berlin, Pennsylvania and the Charles S. Monroe Technology Center in Loudoun County, Virginia. Discusses the involvement of the Fiber Optic Association with education, research and development, manufacturing, sales, distribution, installation, and maintenance of fiber optic…

  17. Handbook : guidelines for successful location and accommodation of major distribution centers on Texas highways.

    DOT National Transportation Integrated Search

    2010-04-01

    Distribution centers (DC) have become more common in Texas over the past decade. As : major generators of large truck traffic, DCs can increase design and maintenance requirements of : Texas highway facilities. This handbook contains guidelines for u...

  18. 3D web based learning of medical equipment employed in intensive care units.

    PubMed

    Cetin, Aydın

    2012-02-01

    In this paper, both synchronous and asynchronous web based learning of 3D medical equipment models used in hospital intensive care unit have been described over the moodle course management system. 3D medical equipment models were designed with 3ds Max 2008, then converted to ASE format and added interactivity displayed with Viewpoint-Enliven. 3D models embedded in a web page in html format with dynamic interactivity-rotating, panning and zooming by dragging a mouse over images-and descriptive information is embedded to 3D model by using xml format. A pilot test course having 15 h was applied to technicians who is responsible for intensive care unit at Medical Devices Repairing and Maintenance Center (TABOM) of Turkish High Specialized Hospital.

  19. Measuring test productivity - The elusive dream

    NASA Astrophysics Data System (ADS)

    Ward, D. T.; Cross, E. J., Jr.

    1983-11-01

    The paper summarizes definitions and terminology relating to measurement of Test and Evaluation productivity before settling on the appropriate criteria for such a measurement model. A productivity measurement scheme suited for use by Test and Evaluation organizations is suggested. This mathematical model is a simplified version of one proposed by the American Productivity Center and applied to an aircraft maintenance facility by Fletcher. It includes only four primary variables: safety, schedule, cost, and deficiencies reported with varying degrees of objectivity and subjectivity involved in quantifying them. A hypothetical example of a fighter aircraft flight test program is used to illustrate the application of the productivity measurement model. The proposed model is intended to serve as a first iteration procedure and should be tested against real test programs to verify and refine it.

  20. Depot Maintenance: Air Force is Assessing Engine Maintenance Options for Work Currently Performed at Kelly Aviation Center

    DTIC Science & Technology

    2011-02-11

    on TF39 engines, which are typically used for C-5 Galaxy aircraft; T56 engines, which are typically used for C-130 aircraft; and fuel accessories on...conducting separate cost-benefit analyses for the TF39 and T56 engine maintenance work. Under Air Force guidance for depot-level source-of-repair selection...Force has not developed specific risk mitigation plans for the TF39 or T56 engines because it is still assessing how the work will be performed

  1. Evaluation of a Transportable Hot-Gas Decontamination System for the Decontamination of Explosives-Contaminated Debris & Piping. Operations & Maintenance Manual. Volume III.

    DTIC Science & Technology

    1995-06-27

    Terminal Board............ $55.00 CONTROLS E-53-29 ( Non -etock: 2 weeks) Ebony Terminal Board with Screws ..........$70.00 NOTE: All control orders...in XL and TF models after 198 1. Non -asbe stos listed prices. mstedial is used.II Honeywell UDC 3000 Single Set Point Control $550.00 Small Roind...Honeywell. Leeds and Northrup, NOTE- This looks like a mushroom wit a. 314? hole in the Research Inc. and many other controls are available by center

  2. Situation awareness in airway facilities : replacement of maintenance control centers with operations control centers.

    DOT National Transportation Integrated Search

    2000-01-01

    This document contains an updated and expanded version of the Automation chapter of the Human Factors Design Guide. A research team of human factors experts evaluated the existing guidelines for relevance, clarity, and usability. The research team dr...

  3. Relationship between vaccine vial monitors and cold chain infrastructure in a rural district of India.

    PubMed

    Samant, Y; Lanjewar, H; Parker, L; Block, D; Stein, B; Tomar, G

    2007-01-01

    The potency of oral polio vaccine (OPV), a heat-labile vaccine, is preserved by the cold chain. The Vaccine Vial Monitor, a heat-sensitive label, is critical to the monitoring and maintenance of the cold chain. This study was conducted to evaluate the relationship between the adequacy of cold chain infrastructure and the proper use of Vaccine Vial Monitor in a rural district of India. Forty-six health centers in a rural district were included in our evaluation of the cold chain equipment and the Vaccine Vial Monitors. Cold chain equipment and vaccine vials within each health center were evaluated for adherence to WHO cold chain maintenance protocols and the Vaccine Vial Monitor stage, respectively. Among the 46 health centers, Vaccine Vial Monitor stage I was found at 58% of the health centers, 33% of the health centers reported stage II and 9% reported a stage III, indicating weaknesses in the cold chain mechanism Cold chain for the OPV was not adequately maintained at primary and sub-health centers in this rural district. Well maintained ice packs and vaccine carriers will help ensure delivery and availability of a safe and potent vaccine to children in rural areas of India.

  4. Design and implementation of satellite formations and constellations

    NASA Technical Reports Server (NTRS)

    Folta, David; Newman, Lauri Kraft; Quinn, David

    1998-01-01

    The direction to develop small low cost spacecraft has led many scientists to recognize the advantage of flying spacecraft in constellations and formations to achieve the correlated instrument measurements formerly possible only by flying many instruments on a single large platform. Yet, constellations and formation flying impose additional complications on orbit selection and orbit maintenance, especially when each spacecraft has its own orbit or science requirements. The purpose of this paper is to develop an operational control method for maintenance of these missions. Examples will be taken from the Earth Observing-1 (EO-1) spacecraft that is part of the New Millennium Program (NMP) and from proposed Earth System Science Program Office (ESSPO) constellations. Results can be used to determine the appropriateness of constellations and formation flying for a particular case as well as the operational impacts. Applications to the ESSPO and NMP are highly considered in analysis and applications. After constellation and formation analysis is completed, implementation of a maneuver maintenance strategy becomes the driver. Advances in technology and automation by GSFC's Guidance, Navigation, and Control Center allow more of the burden of the orbit selection and maneuver maintenance to be automated and ultimately placed onboard the spacecraft, mitigating most of the associated operational concerns. This paper presents the GSFC closed-loop control method to fly in either constellations or formations through the use of an autonomous closed loop three-axis navigation control and innovative orbit maintenance support. Simulation results using AutoCon(TM) and FreeFlyer(TM) with various fidelity levels of modeling and algorithms are presented.

  5. Design and Implementation of Satellite Formations and Constellations

    NASA Technical Reports Server (NTRS)

    Folta, David; Newman, Lauri Kraft; Quinn, David

    1998-01-01

    The direction to develop small low cost spacecraft has led many scientists to recognize the advantage of flying spacecraft in constellations and formations to achieve the correlated instrument measurements formerly possible only by flying many instruments on a single large platform. Yet, constellations and formation flying impose additional complications on orbit selection and orbit maintenance, especially when each spacecraft has its own orbit or science requirements. The purpose of this paper is to develop an operational control method for maintenance of these missions. Examples will be taken from the Earth Observing-1 (EO-1) spacecraft that is part of the New Millennium Program (NMP) and from proposed Earth System Science Program Office (ESSPO) constellations. Results can be used to determine the appropriateness of constellations and formation flying for a particular case as well as the operational impacts. Applications to the ESSPO and NMP are highly considered in analysis and applications. After constellation and formation analysis is completed, implementation of a maneuver maintenance strategy becomes the driver. Advances in technology and automation by GSFC's Guidance, Navigation, and Control Center allow more of the burden of the orbit selection and maneuver maintenance to be automated and ultimately placed onboard the spacecraft, mitigating most of the associated operational concerns. This paper presents the GSFC closed-loop control method to fly in either constellations or formations through the use of an autonomous closed loop three-axis navigation control and innovative orbit maintenance support. Simulation results using AutoCon(Trademark) and FreeFlyer(Trademark) with various fidelity levels of modeling and algorithms are presented.

  6. Learner-Centered Instruction (LCI): Volume IV, The Simulated Maintenance Task Environment (SMTE): A Job Specific Simulator.

    ERIC Educational Resources Information Center

    Rifkin, Kenneth I.; And Others

    The purpose of the simulated maintenance task environment is to provide a means for training and job performance testing of the flight line weapon control systems mechanic/technician for the F-111A aircraft. It provides practice in flight line equipment checkout, troubleshooting, and removal and replacement of line replaceable units in the…

  7. NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR OPERATION AND MAINTENANCE OF THE LAN AND RELATED MICROCOMPUTER ENVIRONMENT (UA-D-1.1)

    EPA Science Inventory

    The purpose of this SOP is to describe procedures for using and maintaining the local area network (LAN) and related microcomputer equipment at the HRP Site of the Arizona Prevention Center. These methods were used for all data operations and maintenance routines during the Ariz...

  8. Prediction of attendance at fitness center: a comparison between the theory of planned behavior, the social cognitive theory, and the physical activity maintenance theory

    PubMed Central

    Jekauc, Darko; Völkle, Manuel; Wagner, Matthias O.; Mess, Filip; Reiner, Miriam; Renner, Britta

    2015-01-01

    In the processes of physical activity (PA) maintenance specific predictors are effective, which differ from other stages of PA development. Recently, Physical Activity Maintenance Theory (PAMT) was specifically developed for prediction of PA maintenance. The aim of the present study was to evaluate the predictability of the future behavior by the PAMT and compare it with the Theory of Planned Behavior (TPB) and Social Cognitive Theory (SCT). Participation rate in a fitness center was observed for 101 college students (53 female) aged between 19 and 32 years (M = 23.6; SD = 2.9) over 20 weeks using a magnetic card. In order to predict the pattern of participation TPB, SCT and PAMT were used. A latent class zero-inflated Poisson growth curve analysis identified two participation patterns: regular attenders and intermittent exercisers. SCT showed the highest predictive power followed by PAMT and TPB. Impeding aspects as life stress and barriers were the strongest predictors suggesting that overcoming barriers might be an important aspect for working out on a regular basis. Self-efficacy, perceived behavioral control, and social support could also significantly differentiate between the participation patterns. PMID:25717313

  9. Android Platform Based Smartphones for a Logistical Remote Association Repair Framework

    PubMed Central

    Lien, Shao-Fan; Wang, Chun-Chieh; Su, Juhng-Perng; Chen, Hong-Ming; Wu, Chein-Hsing

    2014-01-01

    The maintenance of large-scale systems is an important issue for logistics support planning. In this paper, we developed a Logistical Remote Association Repair Framework (LRARF) to aid repairmen in keeping the system available. LRARF includes four subsystems: smart mobile phones, a Database Management System (DBMS), a Maintenance Support Center (MSC) and wireless networks. The repairman uses smart mobile phones to capture QR-codes and the images of faulty circuit boards. The captured QR-codes and images are transmitted to the DBMS so the invalid modules can be recognized via the proposed algorithm. In this paper, the Linear Projective Transform (LPT) is employed for fast QR-code calibration. Moreover, the ANFIS-based data mining system is used for module identification and searching automatically for the maintenance manual corresponding to the invalid modules. The inputs of the ANFIS-based data mining system are the QR-codes and image features; the output is the module ID. DBMS also transmits the maintenance manual back to the maintenance staff. If modules are not recognizable, the repairmen and center engineers can obtain the relevant information about the invalid modules through live video. The experimental results validate the applicability of the Android-based platform in the recognition of invalid modules. In addition, the live video can also be recorded synchronously on the MSC for later use. PMID:24967603

  10. A theoretical reassessment of microbial maintenance and implications for microbial ecology modeling.

    PubMed

    Wang, Gangsheng; Post, Wilfred M

    2012-09-01

    We attempted to reconcile three microbial maintenance models (Herbert, Pirt, and Compromise) through a theoretical reassessment. We provided a rigorous proof that the true growth yield coefficient (Y(G)) is the ratio of the specific maintenance rate (a in Herbert) to the maintenance coefficient (m in Pirt). Other findings from this study include: (1) the Compromise model is identical to the Herbert for computing microbial growth and substrate consumption, but it expresses the dependence of maintenance on both microbial biomass and substrate; (2) the maximum specific growth rate in the Herbert (μ(max,H)) is higher than those in the other two models (μ(max,P) and μ(max,C)), and the difference is the physiological maintenance factor (m(q) = a); and (3) the overall maintenance coefficient (m(T)) is more sensitive to m(q) than to the specific growth rate (μ(G)) and Y(G). Our critical reassessment of microbial maintenance provides a new approach for quantifying some important components in soil microbial ecology models. © This article is a US government work and is in the public domain in the USA.

  11. Building a maintenance policy through a multi-criterion decision-making model

    NASA Astrophysics Data System (ADS)

    Faghihinia, Elahe; Mollaverdi, Naser

    2012-08-01

    A major competitive advantage of production and service systems is establishing a proper maintenance policy. Therefore, maintenance managers should make maintenance decisions that best fit their systems. Multi-criterion decision-making methods can take into account a number of aspects associated with the competitiveness factors of a system. This paper presents a multi-criterion decision-aided maintenance model with three criteria that have more influence on decision making: reliability, maintenance cost, and maintenance downtime. The Bayesian approach has been applied to confront maintenance failure data shortage. Therefore, the model seeks to make the best compromise between these three criteria and establish replacement intervals using Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE II), integrating the Bayesian approach with regard to the preference of the decision maker to the problem. Finally, using a numerical application, the model has been illustrated, and for a visual realization and an illustrative sensitivity analysis, PROMETHEE GAIA (the visual interactive module) has been used. Use of PROMETHEE II and PROMETHEE GAIA has been made with Decision Lab software. A sensitivity analysis has been made to verify the robustness of certain parameters of the model.

  12. Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

    NASA Technical Reports Server (NTRS)

    Carl, John G.

    1973-01-01

    This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

  13. Drug addiction stigma in relation to methadone maintenance treatment by different service delivery models in Vietnam.

    PubMed

    Tran, Bach Xuan; Vu, Phuong Bich; Nguyen, Long Hoang; Latkin, Sophia Knowlton; Nguyen, Cuong Tat; Phan, Huong Thu Thi; Latkin, Carl A

    2016-03-08

    The rapid expansion of methadone maintenance treatment (MMT) services has significantly improved health status and quality of life of patients. However, little is known about its impacts on addiction-related stigma and associated factors. A cross-sectional survey was conducted in 2013 in Vietnam's capital, Hanoi, and Nam Dinh province among 1016 methadone maintenance patients; 26.6 % at provincial AIDS centers (PAC) and 73.4 % at district health centers (DHC), respectively. Drug addiction history and related stigma, health status, MMT-related covariates, and sociodemographic characteristics were interviewed. More than one-sixth of the sample reported experiencing felt or enacted stigma, including Blame or Judgement (17.2 %), Shame (19.9 %), or Others' fear of HIV transmission (17.1 %). These proportions were higher in PACs than in DHCs, which are integrated with other HIV or general health care services. Very few patients reported being discriminated at the workplace (2.5 %) or at health care services (1.7 %); however, 15.6 % of patients at PACs and 10.6 % of patients at DHCs reported discrimination in their communities. Drug users taking MMT for longer periods were less likely to report felt stigma. Other factors associated with stigma against MMT patients included the lack of comprehensive services, higher education, presence of pain/discomfort, and anxiety/depression, self-reported HIV positive, and number of previous drug rehabilitation episodes. The study shows a high level of stigma against MMT patients and emphasizes the necessity to integrate MMT with comprehensive health and support services. Mass communication campaigns to reduce stigma against people with drug addiction and HIV/AIDS, as well as vocational trainings and jobs referrals for MMT patients, are needed to maximize the benefits of MMT programs in Vietnam.

  14. A particle swarm model for estimating reliability and scheduling system maintenance

    NASA Astrophysics Data System (ADS)

    Puzis, Rami; Shirtz, Dov; Elovici, Yuval

    2016-05-01

    Modifying data and information system components may introduce new errors and deteriorate the reliability of the system. Reliability can be efficiently regained with reliability centred maintenance, which requires reliability estimation for maintenance scheduling. A variant of the particle swarm model is used to estimate reliability of systems implemented according to the model view controller paradigm. Simulations based on data collected from an online system of a large financial institute are used to compare three component-level maintenance policies. Results show that appropriately scheduled component-level maintenance greatly reduces the cost of upholding an acceptable level of reliability by reducing the need in system-wide maintenance.

  15. Access to Educational Opportunity in Rural Communities: Alternative Patterns of Delivering Vocational Education in Sparsely Populated Areas. Volume 4: The Interdistrict Cooperative Center: A Centralized Center.

    ERIC Educational Resources Information Center

    Peterson, Roland L.; And Others

    The centralized secondary center pattern of inter-school district cooperation is examined in this third of four case studies addressing access of rural students to vocational education. The report identifies essential features of this form of cooperation, details factors facilitating/impeding the operation/maintenance of the cooperative…

  16. Hypergol Maintenance Facility Hazardous Waste South Staging Areas, SWMU 070 Corrective Measures Implementation

    NASA Technical Reports Server (NTRS)

    Miller, Ralinda R.

    2016-01-01

    This document presents the Corrective Measures Implementation (CMI) Year 10 Annual Report for implementation of corrective measures at the Hypergol Maintenance Facility (HMF) Hazardous Waste South Staging Areas at Kennedy Space Center, Florida. The work is being performed by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) NNK12CA15B, Task Order (TO) 07. Mr. Harry Plaza, P.E., of NASA's Environmental Assurance Branch is the Remediation Project Manager for John F. Kennedy Space Center. The Tetra Tech Program Manager is Mr. Mark Speranza, P.E., and the Tetra Tech Project Manager is Robert Simcik, P.E.

  17. The cost of starting and maintaining a large home hemodialysis program.

    PubMed

    Komenda, Paul; Copland, Michael; Makwana, Jay; Djurdjev, Ogdjenka; Sood, Manish M; Levin, Adeera

    2010-06-01

    Home extended hours hemodialysis improves some measurable biological and quality-of-life parameters over conventional renal replacement therapies in patients with end-stage renal disease. Published small studies evaluating costs have shown savings in terms of ongoing operating costs with this modality. However, all estimates need to include the total costs, including infrastructure, patient training, and maintenance; patient attrition by death, transplantation, technique failure; and the necessity of in-center dialysis. We describe a comprehensive funding model for a large centrally administered but locally delivered home hemodialysis program in British Columbia, Canada that covered 122 patients, of which 113 were still in the program at study end. The majority of patients performed home nocturnal hemodialysis in this 2-year retrospective study. All training periods, both in-center and in-home dialysis, medications, hospitalizations, and deaths were captured using our provincial renal database and vital statistics. Comparative data from the provincial database and pricing models were used for costing purposes. The total comprehensive costs per patient-incorporating startup, home, and in-center dialysis; medications; home remodeling; and consumables-was $59,179 for years 2004-2005 and $48,648 for 2005-2006. The home dialysis patients required multiple in-center dialysis runs, significantly contributing to the overall costs. Our study describes a valid, comprehensive funding model delineating reliable cost estimates of starting and maintaining a large home-based hemodialysis program. Consideration of hidden costs is important for administrators and planners to take into account when designing budgets for home hemodialysis.

  18. 42 CFR 405.2470 - Reports and maintenance of records.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... initial reporting period, the clinic or center must submit an estimate of budgeted costs and visits for..., including the allowable costs actually incurred for the period and the actual number of visits for rural... estimated costs and visits for rural health clinic services or Federally qualified health center services...

  19. 42 CFR 405.2470 - Reports and maintenance of records.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... initial reporting period, the clinic or center must submit an estimate of budgeted costs and visits for..., including the allowable costs actually incurred for the period and the actual number of visits for rural... estimated costs and visits for rural health clinic services or Federally qualified health center services...

  20. 42 CFR 405.2470 - Reports and maintenance of records.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... initial reporting period, the clinic or center must submit an estimate of budgeted costs and visits for..., including the allowable costs actually incurred for the period and the actual number of visits for rural... estimated costs and visits for rural health clinic services or Federally qualified health center services...

  1. Integrating School-Based Health Centers into Managed Care in Massachusetts.

    ERIC Educational Resources Information Center

    Hacker, Karen

    1996-01-01

    This paper examines key steps in the integration of school-based health centers in Massachusetts into managed care and describes the administrative and clinical impact of these relationships. Strategies include enhancing communication between SBHCs and health maintenance organizations, standardizing school-based care, and mandating integration of…

  2. Computer modeling of the stress-strain state of welded construction

    NASA Astrophysics Data System (ADS)

    Nurguzhin, Marat; Danenova, Gulmira; Akhmetzhanov, Talgat

    2017-11-01

    At the present time the maintenance of the welded construction serviceability over normative service life is provided by the maintenance system on the basis of the guiding documents according to the concept of "fail safe". However, technology factors relating to welding such as high residual stresses and significant plastic strains are not considered in the guiding documents. The design procedure of the stressed-strained state of welded constructions is suggested in the paper. The procedure investigates welded constructions during welding and the external load using the program ANSYS. In this paper, the model of influence of the residual stress strain state on the factor of stress intensity is proposed. The calculation method of the residual stressed-strained state (SSS) taking into account the phase transition is developed by the authors. Melting and hardening of a plate material during heating and cooling is considered. The thermomechanical problem of heating a plate by a stationary heat source is solved. The setup of the heating spot center on distance (190 mm) from the crack top in a direction of its propagation leads to the fact that the value of total factor of stress intensity will considerably decrease under action of the specified residual compressing stresses. It can lower the speed of the crack propagation to zero. The suggested method of survivability maintenance can be applied during operation with the purpose of increasing the service life of metal constructions up to running repair of technological machines.

  3. Improving software maintenance through measurement

    NASA Technical Reports Server (NTRS)

    Rombach, H. Dieter; Ulery, Bradford T.

    1989-01-01

    A practical approach to improving software maintenance through measurements is presented. This approach is based on general models for measurement and improvement. Both models, their integration, and practical guidelines for transferring them into industrial maintenance settings are presented. Several examples of applications of the approach to real-world maintenance environments are discussed.

  4. Which factors affect software projects maintenance cost more?

    PubMed

    Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nafiseh

    2013-03-01

    The software industry has had significant progress in recent years. The entire life of software includes two phases: production and maintenance. Software maintenance cost is increasingly growing and estimates showed that about 90% of software life cost is related to its maintenance phase. Extraction and considering the factors affecting the software maintenance cost help to estimate the cost and reduce it by controlling the factors. In this study, the factors affecting software maintenance cost were determined then were ranked based on their priority and after that effective ways to reduce the maintenance costs were presented. This paper is a research study. 15 software related to health care centers information systems in Isfahan University of Medical Sciences and hospitals function were studied in the years 2010 to 2011. Among Medical software maintenance team members, 40 were selected as sample. After interviews with experts in this field, factors affecting maintenance cost were determined. In order to prioritize the factors derived by AHP, at first, measurement criteria (factors found) were appointed by members of the maintenance team and eventually were prioritized with the help of EC software. Based on the results of this study, 32 factors were obtained which were classified in six groups. "Project" was ranked the most effective feature in maintenance cost with the highest priority. By taking into account some major elements like careful feasibility of IT projects, full documentation and accompany the designers in the maintenance phase good results can be achieved to reduce maintenance costs and increase longevity of the software.

  5. Model-Based Testability Assessment and Directed Troubleshooting of Shuttle Wiring Systems

    NASA Technical Reports Server (NTRS)

    Deb, Somnath; Domagala, Chuck; Shrestha, Roshan; Malepati, Venkatesh; Cavanaugh, Kevin; Patterson-Hine, Ann; Sanderfer, Dwight; Cockrell, Jim; Norvig, Peter (Technical Monitor)

    2000-01-01

    We have recently completed a pilot study on the Space shuttle wiring system commissioned by the Wiring Integrity Research (WIRe) team at NASA Ames Research Center, As the space shuttle ages, it is experiencing wiring degradation problems including arcing, chaffing insulation breakdown and broken conductors. A systematic and comprehensive test process is required to thoroughly test and quality assure (QA) the wiring systems. The NASA WIRe team recognized the value of a formal model based analysis for risk-assessment and fault coverage analysis. However. wiring systems are complex and involve over 50,000 wire segments. Therefore, NASA commissioned this pilot study with Qualtech Systems. Inc. (QSI) to explore means of automatically extracting high fidelity multi-signal models from wiring information database for use with QSI's Testability Engineering and Maintenance System (TEAMS) tool.

  6. 76 FR 53348 - Airworthiness Directives; BAE SYSTEMS (Operations) Limited Model BAe 146 Airplanes and Model Avro...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ... Maintenance Manual (AMM) includes chapters 05-10 ``Time Limits'', 05-15 ``Critical Design Configuration... 05, ``Time Limits/Maintenance Checks,'' of BAe 146 Series/AVRO 146-RJ Series Aircraft Maintenance... Chapter 05, ``Time Limits/ Maintenance Checks,'' of the BAE SYSTEMS (Operations) Limited BAe 146 Series...

  7. Final Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

    DTIC Science & Technology

    2010-06-02

    Operations and maintenance OSHA Occupational Safety and Health Administration P2 Pollution prevention Pb Lead PFC Perfluorocarbon PG& E Pacific... lounge , a warehouse, Chapter 2. Description of the Proposed Action and Alternatives Final Environmental Assessment - California Space Center...Pacific Gas & Electric (PG& E ) for the entire Center, once a planned line is completed by PG& E . Acceptance of this approach is dependent on

  8. Detecting Corrosion Under Paint and Insulation

    NASA Technical Reports Server (NTRS)

    Bastin, Gary L.

    2011-01-01

    Corrosion is a major concern at the Kennedy Space Center in Florida due to the proximity of the center to the Atlantic Ocean and to salt water lagoons. High humidity, salt fogs, and ocean breezes, provide an ideal environment in which painted steel structures become corroded. Maintenance of painted steel structures is a never-ending process.

  9. 41 CFR 101-30.503 - Maintenance actions required.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., the agency shall submit data to GSA, the Defense Logistics Agency (DLA), the Veterans Administration... submission to DLSC, except that civilian agencies receiving supply support on an item from a DLA center or... DLA center using DD Form 1685, Data Exchange and/or Proposed Revision of Catalog Data, or to the VA...

  10. 41 CFR 101-30.503 - Maintenance actions required.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., the agency shall submit data to GSA, the Defense Logistics Agency (DLA), the Veterans Administration... submission to DLSC, except that civilian agencies receiving supply support on an item from a DLA center or... DLA center using DD Form 1685, Data Exchange and/or Proposed Revision of Catalog Data, or to the VA...

  11. 41 CFR 101-30.503 - Maintenance actions required.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., the agency shall submit data to GSA, the Defense Logistics Agency (DLA), the Veterans Administration... submission to DLSC, except that civilian agencies receiving supply support on an item from a DLA center or... DLA center using DD Form 1685, Data Exchange and/or Proposed Revision of Catalog Data, or to the VA...

  12. 41 CFR 101-30.503 - Maintenance actions required.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., the agency shall submit data to GSA, the Defense Logistics Agency (DLA), the Veterans Administration... submission to DLSC, except that civilian agencies receiving supply support on an item from a DLA center or... DLA center using DD Form 1685, Data Exchange and/or Proposed Revision of Catalog Data, or to the VA...

  13. 76 FR 4330 - American Overseas Research Centers (AORC) Program; Office of Postsecondary Education; Overview...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-25

    ... conferences; the cost of teaching and research materials; the cost of acquisition, maintenance, and preservation of library collections; the cost of bringing visiting scholars and faculty to the center to teach... propose teaching or research activities conducted by visiting scholars and faculty in one of the seventy...

  14. Evaluation of the Multiple Careers Magnet and Assessment Centers at William B. Carrell, 1978-79.

    ERIC Educational Resources Information Center

    Maples, Wayne; And Others

    The report evaluates Texas' Multiple Careers Magnet Center (MCMC), a part time program to provide special education secondary students with career training. It is explained that students enter one of six career education clusters: furniture repair and upholstery, general construction trades, building and grounds maintenance, laundry and dry…

  15. In vitro maintenance and cryopreservation of Plant Variety Protection vouchers germplasm of Solanum tuberosum cultivars

    USDA-ARS?s Scientific Manuscript database

    The USDA-ARS, National Center for Genetic Resources Preservation maintains the voucher germplasm of Plant Variety Protection (PVP) potato (S. tuberosum) cultivars registered with the U.S. Plant Variety Protection Office. The potato cultivars are deposited at the Center as tissue culture and are main...

  16. An online condition monitoring system implemented an internet connectivity and FTP for low speed slew bearing

    NASA Astrophysics Data System (ADS)

    Caesarendra, W.; Kosasih, B.; Tjahjowidodo, T.; Ariyanto, M.; Daryl, LWQ; Pamungkas, D.

    2018-04-01

    Rapid and reliable information in slew bearing maintenance is not trivial issue. This paper presents the online monitoring system to assist maintenance engineer in order to monitor the bearing condition of low speed slew bearing in sheet metal company. The system is able to pass the vibration information from the place where the bearing and accelerometer sensors are attached to the data center; and from the data center it can be access by opening the online monitoring website from any place and by any person. The online monitoring system is built using some programming languages such as C language, MATLAB, PHP, HTML and CSS. Generally, the flow process is start with the automatic vibration data acquisition; then features are calculated from the acquired vibration data. These features are then sent to the data center; and form the data center, the vibration features can be seen through the online monitoring website. This online monitoring system has been successfully applied in School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong.

  17. Application of reliability-centered maintenance to boiling water reactor emergency core cooling systems fault-tree analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Choi, Y.A.; Feltus, M.A.

    1995-07-01

    Reliability-centered maintenance (RCM) methods are applied to boiling water reactor plant-specific emergency core cooling system probabilistic risk assessment (PRA) fault trees. The RCM is a technique that is system function-based, for improving a preventive maintenance (PM) program, which is applied on a component basis. Many PM programs are based on time-directed maintenance tasks, while RCM methods focus on component condition-directed maintenance tasks. Stroke time test data for motor-operated valves (MOVs) are used to address three aspects concerning RCM: (a) to determine if MOV stroke time testing was useful as a condition-directed PM task; (b) to determine and compare the plant-specificmore » MOV failure data from a broad RCM philosophy time period compared with a PM period and, also, compared with generic industry MOV failure data; and (c) to determine the effects and impact of the plant-specific MOV failure data on core damage frequency (CDF) and system unavailabilities for these emergency systems. The MOV stroke time test data from four emergency core cooling systems [i.e., high-pressure coolant injection (HPCI), reactor core isolation cooling (RCIC), low-pressure core spray (LPCS), and residual heat removal/low-pressure coolant injection (RHR/LPCI)] were gathered from Philadelphia Electric Company`s Peach Bottom Atomic Power Station Units 2 and 3 between 1980 and 1992. The analyses showed that MOV stroke time testing was not a predictor for eminent failure and should be considered as a go/no-go test. The failure data from the broad RCM philosophy showed an improvement compared with the PM-period failure rates in the emergency core cooling system MOVs. Also, the plant-specific MOV failure rates for both maintenance philosophies were shown to be lower than the generic industry estimates.« less

  18. The air transportation industry birthplace of reliability-centered maintenance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Matteson, T.D.

    1996-08-01

    The 1980s and 1970s provided a timely opportunity for examining and radically changing the process called {open_quotes}preventive maintenance{close_quotes} as it is applied to the aircraft used for scheduled air transportation. The Federal Aviation Administration and four major airlines, United, American, Pan American and Trans World, were the {open_quotes}principals{close_quotes} in that process. While United`s work with the FAA on the Boeing 737 had opened the door a crack, the Boeing 747 presented a major opportunity to radically improve the process for maintenance program design. That program was guided by the results of United`s analyses of failure data from operations of severalmore » fleets, each larger than 100 aircraft, and the concurrent experience of American, Pan American and Trans World. That knowledge provided the insights necessary to support an entirely different approach to maintenance program design. As a result, while United`s existing maintenance program required scheduled overhaul of 339 items on each DC-8, it required overhaul of only 8 items on the B-7471 Although the initial thrust of that work focused on components of active systems, there was concurrent work focused on items whose principal function was to carry the loads associated with operations. That program focused on the classification of structurally-significant items and their classification as {open_quotes}safe life{close_quotes} or {open_quotes}damage tolerant{close_quote} to determine what periodic replacements or repeated inspections were required. That work came to the attention of the Department of Defense which supported preparation of the book-length report by F. Stanley Nowlan and Howard F. Heap at United Airlines entitled {open_quote}Reliability-Centered maintenance{close_quotes}.« less

  19. Health Care Providers' Perceptions of Responsibilities and Resources to Reduce Type 2 Diabetes Risk After Gestational Diabetes Mellitus.

    PubMed

    Hewage, Sumali S; Singh, Shweta R; Chi, Claudia; Chan, Jerry K Y; Yew, Tong Wei; Han, Wee Meng; Yoong, Joanne

    2018-04-01

    IN BRIEF Gestational diabetes mellitus (GDM) increases the risk for type 2 diabetes. This qualitative study aimed to evaluate health care providers' perceptions of care responsibilities and resources related to reducing type 2 diabetes risk among women with previous GDM in Singapore. Health care providers acknowledged a shared responsibility. They felt that they had less understanding of compliance with long-term maintenance of lifestyle change, exacerbated further by fragmentation of follow-up care. The application of more integrated patient-centered care models, combined with greater health literacy, is urgently required in this area.

  20. The advanced software development workstation project

    NASA Technical Reports Server (NTRS)

    Fridge, Ernest M., III; Pitman, Charles L.

    1991-01-01

    The Advanced Software Development Workstation (ASDW) task is researching and developing the technologies required to support Computer Aided Software Engineering (CASE) with the emphasis on those advanced methods, tools, and processes that will be of benefit to support all NASA programs. Immediate goals are to provide research and prototype tools that will increase productivity, in the near term, in projects such as the Software Support Environment (SSE), the Space Station Control Center (SSCC), and the Flight Analysis and Design System (FADS) which will be used to support the Space Shuttle and Space Station Freedom. Goals also include providing technology for development, evolution, maintenance, and operations. The technologies under research and development in the ASDW project are targeted to provide productivity enhancements during the software life cycle phase of enterprise and information system modeling, requirements generation and analysis, system design and coding, and system use and maintenance. On-line user's guides will assist users in operating the developed information system with knowledge base expert assistance.

  1. Generalized random sign and alert delay models for imperfect maintenance.

    PubMed

    Dijoux, Yann; Gaudoin, Olivier

    2014-04-01

    This paper considers the modelling of the process of Corrective and condition-based Preventive Maintenance, for complex repairable systems. In order to take into account the dependency between both types of maintenance and the possibility of imperfect maintenance, Generalized Competing Risks models have been introduced in "Doyen and Gaudoin (J Appl Probab 43:825-839, 2006)". In this paper, we study two classes of these models, the Generalized Random Sign and Generalized Alert Delay models. A Generalized Competing Risks model can be built as a generalization of a particular Usual Competing Risks model, either by using a virtual age framework or not. The models properties are studied and their parameterizations are discussed. Finally, simulation results and an application to real data are presented.

  2. Integrating addiction treatment into primary care using mobile health technology: protocol for an implementation research study

    PubMed Central

    2014-01-01

    Background Healthcare reform in the United States is encouraging Federally Qualified Health Centers and other primary-care practices to integrate treatment for addiction and other behavioral health conditions into their practices. The potential of mobile health technologies to manage addiction and comorbidities such as HIV in these settings is substantial but largely untested. This paper describes a protocol to evaluate the implementation of an E-Health integrated communication technology delivered via mobile phones, called Seva, into primary-care settings. Seva is an evidence-based system of addiction treatment and recovery support for patients and real-time caseload monitoring for clinicians. Methods/Design Our implementation strategy uses three models of organizational change: the Program Planning Model to promote acceptance and sustainability, the NIATx quality improvement model to create a welcoming environment for change, and Rogers’s diffusion of innovations research, which facilitates adaptations of innovations to maximize their adoption potential. We will implement Seva and conduct an intensive, mixed-methods assessment at three diverse Federally Qualified Healthcare Centers in the United States. Our non-concurrent multiple-baseline design includes three periods — pretest (ending in four months of implementation preparation), active Seva implementation, and maintenance — with implementation staggered at six-month intervals across sites. The first site will serve as a pilot clinic. We will track the timing of intervention elements and assess study outcomes within each dimension of the Reach, Effectiveness, Adoption, Implementation, and Maintenance framework, including effects on clinicians, patients, and practices. Our mixed-methods approach will include quantitative (e.g., interrupted time-series analysis of treatment attendance, with clinics as the unit of analysis) and qualitative (e.g., staff interviews regarding adaptations to implementation protocol) methods, and assessment of implementation costs. Discussion If implementation is successful, the field will have a proven technology that helps Federally Qualified Health Centers and affiliated organizations provide addiction treatment and recovery support, as well as a proven strategy for implementing the technology. Seva also has the potential to improve core elements of addiction treatment, such as referral and treatment processes. A mobile technology for addiction treatment and accompanying implementation model could provide a cost-effective means to improve the lives of patients with drug and alcohol problems. Trial registration ClinicalTrials.gov (NCT01963234). PMID:24884976

  3. Integrating addiction treatment into primary care using mobile health technology: protocol for an implementation research study.

    PubMed

    Quanbeck, Andrew R; Gustafson, David H; Marsch, Lisa A; McTavish, Fiona; Brown, Randall T; Mares, Marie-Louise; Johnson, Roberta; Glass, Joseph E; Atwood, Amy K; McDowell, Helene

    2014-05-29

    Healthcare reform in the United States is encouraging Federally Qualified Health Centers and other primary-care practices to integrate treatment for addiction and other behavioral health conditions into their practices. The potential of mobile health technologies to manage addiction and comorbidities such as HIV in these settings is substantial but largely untested. This paper describes a protocol to evaluate the implementation of an E-Health integrated communication technology delivered via mobile phones, called Seva, into primary-care settings. Seva is an evidence-based system of addiction treatment and recovery support for patients and real-time caseload monitoring for clinicians. Our implementation strategy uses three models of organizational change: the Program Planning Model to promote acceptance and sustainability, the NIATx quality improvement model to create a welcoming environment for change, and Rogers's diffusion of innovations research, which facilitates adaptations of innovations to maximize their adoption potential. We will implement Seva and conduct an intensive, mixed-methods assessment at three diverse Federally Qualified Healthcare Centers in the United States. Our non-concurrent multiple-baseline design includes three periods - pretest (ending in four months of implementation preparation), active Seva implementation, and maintenance - with implementation staggered at six-month intervals across sites. The first site will serve as a pilot clinic. We will track the timing of intervention elements and assess study outcomes within each dimension of the Reach, Effectiveness, Adoption, Implementation, and Maintenance framework, including effects on clinicians, patients, and practices. Our mixed-methods approach will include quantitative (e.g., interrupted time-series analysis of treatment attendance, with clinics as the unit of analysis) and qualitative (e.g., staff interviews regarding adaptations to implementation protocol) methods, and assessment of implementation costs. If implementation is successful, the field will have a proven technology that helps Federally Qualified Health Centers and affiliated organizations provide addiction treatment and recovery support, as well as a proven strategy for implementing the technology. Seva also has the potential to improve core elements of addiction treatment, such as referral and treatment processes. A mobile technology for addiction treatment and accompanying implementation model could provide a cost-effective means to improve the lives of patients with drug and alcohol problems. ClinicalTrials.gov (NCT01963234).

  4. Effectiveness of Gross Model-Based Emotion Regulation Strategies Training on Anger Reduction in Drug-Dependent Individuals and its Sustainability in Follow-up.

    PubMed

    Massah, Omid; Sohrabi, Faramarz; A'azami, Yousef; Doostian, Younes; Farhoudian, Ali; Daneshmand, Reza

    2016-03-01

    Emotion plays an important role in adapting to life changes and stressful events. Difficulty regulating emotions is one of the problems drug abusers often face, and teaching these individuals to express and manage their emotions can be effective on improving their difficult circumstances. The present study aimed to determine the effectiveness of the Gross model-based emotion regulation strategies training on anger reduction in drug-dependent individuals. The present study had a quasi-experimental design wherein pretest-posttest evaluations were applied using a control group. The population under study included addicts attending Marivan's methadone maintenance therapy centers in 2012 - 2013. Convenience sampling was used to select 30 substance-dependent individuals undergoing maintenance treatment who were then randomly assigned to the experiment and control groups. The experiment group received its training in eight two-hour sessions. Data were analyzed using analysis of co-variance and paired t-test. There was significant reduction in anger symptoms of drug-dependent individuals after gross model based emotion regulation training (ERT) (P < 0.001). Moreover, the effectiveness of the training on anger was persistent in the follow-up period. Symptoms of anger in drug-dependent individuals of this study were reduced by gross model-based emotion regulation strategies training. Based on the results of this study, we may conclude that the gross model based emotion regulation strategies training can be applied alongside other therapies to treat drug abusers undergoing rehabilitation.

  5. Paranal maintenance and CMMS experience

    NASA Astrophysics Data System (ADS)

    Montano, Nelson

    2004-10-01

    During the last four years of operations, low technical downtime has been one of the relevant records of the Paranal Observatory. From the beginning of the Very Large Telescope (VLT) project, European Southern Observatory (ESO) has considered the implementation of a proper maintenance strategy a fundamental point in order to ensure low technical down time and preserve the Observatory's assets. The implementation of the maintenance strategy was based on the following aspects: - Strong maintenance sense during the design stage. Line Replacement Unit (LRU) concept, standardization and modularity of the Observatory equipment - Creation of a dedicated team for Maintenance - The implementation of a Computerized Maintenance Management System After four operational years, the result of these aspects has exceeded the expectations; the Observatory has been operating with high availability under a sustainable strategy. The strengths of the maintenance strategy have been based on modern maintenance concepts applied by regular production companies, where any minute of down time involves high cost. The operation of the actual Paranal Maintenance System is based mainly on proactive activities, such as regular inspections, preventive maintenance (PM) and predictive maintenance (PdM) plans. Nevertheless, it has been necessary to implement a strong plan for corrective maintenance (CM). The Spare Parts Strategy has also been an important point linked to the Maintenance Strategy and CMMS implementation. At present, almost 4,000 items related to the Observatory spare parts are loaded into the CMMS database. Currently, we are studying the implementation of a Reliability Centered Maintenance (RCM) project in one of our critical systems The following document presents the actual status of the Paranal Maintenance Strategy and which have been the motivations to implement the established strategy.

  6. EX.MAIN. Expert System Model for Maintenance and Staff Training.

    ERIC Educational Resources Information Center

    Masturzi, Elio R.

    EX.MAIN, a model for maintenance and staff training which combines knowledge based expert systems and computer based training, was developed jointly by the Department of Production Engineering of the University of Naples and CIRCUMVESUVIANA, the largest private railroad in Italy. It is a global model in the maintenance field which contains both…

  7. Multi-objective group scheduling optimization integrated with preventive maintenance

    NASA Astrophysics Data System (ADS)

    Liao, Wenzhu; Zhang, Xiufang; Jiang, Min

    2017-11-01

    This article proposes a single-machine-based integration model to meet the requirements of production scheduling and preventive maintenance in group production. To describe the production for identical/similar and different jobs, this integrated model considers the learning and forgetting effects. Based on machine degradation, the deterioration effect is also considered. Moreover, perfect maintenance and minimal repair are adopted in this integrated model. The multi-objective of minimizing total completion time and maintenance cost is taken to meet the dual requirements of delivery date and cost. Finally, a genetic algorithm is developed to solve this optimization model, and the computation results demonstrate that this integrated model is effective and reliable.

  8. Costs of Providing Infusion Therapy for Rheumatoid Arthritis in a Hospital-based Infusion Center Setting.

    PubMed

    Schmier, Jordana; Ogden, Kristine; Nickman, Nancy; Halpern, Michael T; Cifaldi, Mary; Ganguli, Arijit; Bao, Yanjun; Garg, Vishvas

    2017-08-01

    Many hospital-based infusion centers treat patients with rheumatoid arthritis (RA) with intravenous biologic agents, yet may have a limited understanding of the overall costs of infusion in this setting. The purposes of this study were to conduct a microcosting analysis from a hospital perspective and to develop a model using an activity-based costing approach for estimating costs associated with the provision of hospital-based infusion services (preparation, administration, and follow-up) in the United States for maintenance treatment of moderate to severe RA. A spreadsheet-based model was developed. Inputs included hourly wages, time spent providing care, supply/overhead costs, laboratory testing, infusion center size, and practice pattern information. Base-case values were derived from data from surveys, published studies, standard cost sources, and expert opinion. Costs are presented in year-2017 US dollars. The base case modeled a hospital infusion center serving patients with RA treated with abatacept, tocilizumab, infliximab, or rituximab. Estimated overall costs of infusions per patient per year were $36,663 (rituximab), $36,821 (tocilizumab), $44,973 (infliximab), and $46,532 (abatacept). Of all therapies, the biologic agents represented the greatest share of overall costs, ranging from 87% to $91% of overall costs per year. Excluding infusion drug costs, labor accounted for 53% to 57% of infusion costs. Biologic agents represented the highest single cost associated with RA infusion care; however, personnel, supplies, and overhead costs also contributed substantially to overall costs (8%-16%). This model may provide a helpful and adaptable framework for use by hospitals in informing decision making about services offered and their associated financial implications. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  9. Sensitivity Study for Long Term Reliability

    NASA Technical Reports Server (NTRS)

    White, Allan L.

    2008-01-01

    This paper illustrates using Markov models to establish system and maintenance requirements for small electronic controllers where the goal is a high probability of continuous service for a long period of time. The system and maintenance items considered are quality of components, various degrees of simple redundancy, redundancy with reconfiguration, diagnostic levels, periodic maintenance, and preventive maintenance. Markov models permit a quantitative investigation with comparison and contrast. An element of special interest is the use of conditional probability to study the combination of imperfect diagnostics and periodic maintenance.

  10. Payload maintenance cost model for the space telescope

    NASA Technical Reports Server (NTRS)

    White, W. L.

    1980-01-01

    An optimum maintenance cost model for the space telescope for a fifteen year mission cycle was developed. Various documents and subsequent updates of failure rates and configurations were made. The reliability of the space telescope for one year, two and one half years, and five years were determined using the failure rates and configurations. The failure rates and configurations were also used in the maintenance simulation computer model which simulate the failure patterns for the fifteen year mission life of the space telescope. Cost algorithms associated with the maintenance options as indicated by the failure patterns were developed and integrated into the model.

  11. The road maintenance funding models in Indonesia use earmarked tax

    NASA Astrophysics Data System (ADS)

    Gultom, Tiopan Henry M.; Tamin, Ofyar Z.; Sjafruddin, Ade; Pradono

    2017-11-01

    One of the solutions to get a sustainable road maintenance fund is to separate road sector revenue from other accounts, afterward, form a specific account for road maintenance. In 2001, Antameng and the Ministry of Public Works proposed a road fund model in Indonesia. Sources of the road funds proposal was a tariff formed on the nominal total tax. The policy of road funds was proposed to finance the road network maintenance of districts and provincials. This research aims to create a policy model of road maintenance funds in Indonesia using an earmarked tax mechanism. The research method is qualitative research, with data collection techniques are triangulation. Interview methods conducted were semi-structured. Strength, Weakness, Opportunities, and Threat from every part of the models were showen on the survey format. Respondents were representative of executives who involved directly against the financing of road maintenance. Validation model conducted by a discussion panel, it was called the Focus Group Discussion (FGD). The FGD involved all selected respondents. Road maintenance financing model that most appropriately applied in Indonesia was a model of revenue source use an earmarked PBBKB, PKB and PPnBM. Revenue collection mechanism was added tariff of registered vehicle tax (PKB), Vehicle Fuel Tax (PBBKB) and the luxury vehicle sales tax (PPnBM). The funds are managed at the provincial level by a public service agency.

  12. Shifting physician prescribing to a preferred histamine-2-receptor antagonist. Effects of a multifactorial intervention in a mixed-model health maintenance organization.

    PubMed

    Brufsky, J W; Ross-Degnan, D; Calabrese, D; Gao, X; Soumerai, S B

    1998-03-01

    This study was undertaken to determine whether a program of education, therapeutic reevaluation of eligible patients, and performance feedback could shift prescribing to cimetidine from other histamine-2 receptor antagonists, which commonly are used in the management of ulcers and reflux, and reduce costs without increasing rates of ulcer-related hospital admissions. This study used an interrupted monthly time series with comparison series in a large mixed-model health maintenance organization. Physicians employed in health centers (staff model) and physicians in independent medical groups contracting to provide health maintenance organization services (group model) participated. The comparative percentage prescribed of specific histamine-2 receptor antagonists (market share), total histamine-2 receptor antagonist prescribing, cost per histamine-2 receptor antagonist prescription, and the rate of hospitalization for gastrointestinal illness were assessed. In the staff model, therapeutic reevaluation resulted in a sudden increase in market share of the preferred histamine-2 receptor antagonist cimetidine (+53.8%) and a sudden decrease in ranitidine (-44.7%) and famotidine (-4.8%); subsequently, cimetidine market share grew by 1.1% per month. In the group model, therapeutic reevaluation resulted in increased cimetidine market share (+9.7%) and decreased prescribing of other histamine-2 receptor antagonists (ranitidine -11.6%; famotidine -1.2%). Performance feedback did not result in further changes in prescribing in either setting. Use of omeprazole, an expensive alternative, essentially was unchanged by the interventions, as were overall histamine-2 receptor antagonist prescribing and hospital admissions for gastrointestinal illnesses. This intervention, which cost approximately $60,000 to implement, resulted in estimated annual savings in histamine-2 receptor antagonist expenditures of $1.06 million. Annual savings in histamine-2 receptor antagonist expenditures after this multifaceted intervention were more than implementation costs, with no discernible effects on numbers of hospitalizations. The magnitude of effect and cost savings were much greater in the staff model; organizational factors and economic incentives may have contributed to these differences. More research is needed to determine the generalizability of this approach to other technologies and managed care settings.

  13. Technology transfer and evaluation for Space Station telerobotics

    NASA Technical Reports Server (NTRS)

    Price, Charles R.; Stokes, Lebarian; Diftler, Myron A.

    1994-01-01

    The international space station (SS) must take advantage of advanced telerobotics in order to maximize productivity and safety and to reduce maintenance costs. The Automation and Robotics Division at the NASA Lyndon B. Johnson Space Center (JSC) has designed, developed, and constructed the Automated Robotics Maintenance of Space Station (ARMSS) facility for the purpose of transferring and evaluating robotic technology that will reduce SS operation costs. Additionally, JSC had developed a process for expediting the transfer of technology from NASA research centers and evaluating these technologies in SS applications. Software and hardware system developed at the research centers and NASA sponsored universities are currently being transferred to JSC and integrated into the ARMSS for flight crew personnel testing. These technologies will be assessed relative to the SS baseline, and, after refinements, those technologies that provide significant performance improvements will be recommended as upgrades to the SS. Proximity sensors, vision algorithms, and manipulator controllers are among the systems scheduled for evaluation.

  14. African Easterly Jet: Structure and Maintenance

    NASA Technical Reports Server (NTRS)

    Wu, Man-Li C.; Reale, Oreste; Schubert, Siegfried D.; Suarez, Max J.; Koster, Randy D.; Pegion, Philip J.

    2009-01-01

    This article investigates the African Easterly Jet (AEJ), its structure and the forcings contributing to its maintenance, critically revisiting previous work which attributed the maintenance of the jet to soil moisture gradients over tropical Africa. A state-of-the-art global model in a high-end computer framework is used to produce a 3-member 73-year ensemble run forced by observed SST to represent the Control run. The AEJ as produced by the Control is compared with the representation of the AEJ in the European Center for Medium Range Forecast Reanalyses (ERA-40) and other observational data sets and found very realistic. Five Experiments are then performed, each represented by sets of 3-member 22 year long (1980-2001) ensemble runs. The goal of the Experiments is to investigate the role of meridional soil moisture gradients, different land surface properties and orography. Unlike previous studies, which have suppressed soil moisture gradients within a highly idealized framework (i.e., the so-called bucket model), terrestrial evaporation control is here achieved with a highly sophisticated landsurface treatment and with an extensively tested and complex methodology. The results show that the AEJ is suppressed by a combination of absence of meridional evaporation gradients over Africa and constant vegetation, even if the individual forcings taken separately do not lead to the AEJ disappearance, but only its modification. Moreover, the suppression of orography also leads to a different circulation in which there is no AEJ. This work suggests that it is not just soil moisture gradients, but a unique combination of geographical features present only in northern tropical Africa, which causes and maintains the jet.

  15. Evolving technologies drive the new roles of Biomedical Engineering.

    PubMed

    Frisch, P H; St Germain, J; Lui, W

    2008-01-01

    Rapidly changing technology coupled with the financial impact of organized health care, has required hospital Biomedical Engineering organizations to augment their traditional operational and business models to increase their role in developing enhanced clinical applications utilizing new and evolving technologies. The deployment of these technology based applications has required Biomedical Engineering organizations to re-organize to optimize the manner in which they provide and manage services. Memorial Sloan-Kettering Cancer Center has implemented a strategy to explore evolving technologies integrating them into enhanced clinical applications while optimally utilizing the expertise of the traditional Biomedical Engineering component (Clinical Engineering) to provide expanded support in technology / equipment management, device repair, preventive maintenance and integration with legacy clinical systems. Specifically, Biomedical Engineering is an integral component of the Medical Physics Department which provides comprehensive and integrated support to the Center in advanced physical, technical and engineering technology. This organizational structure emphasizes the integration and collaboration between a spectrum of technical expertise for clinical support and equipment management roles. The high cost of clinical equipment purchases coupled with the increasing cost of service has driven equipment management responsibilities to include significant business and financial aspects to provide a cost effective service model. This case study details the dynamics of these expanded roles, future initiatives and benefits for Biomedical Engineering and Memorial Sloan Kettering Cancer Center.

  16. Building an experience factory for maintenance

    NASA Technical Reports Server (NTRS)

    Valett, Jon D.; Condon, Steven E.; Briand, Lionel; Kim, Yong-Mi; Basili, Victor R.

    1994-01-01

    This paper reports the preliminary results of a study of the software maintenance process in the Flight Dynamics Division (FDD) of the National Aeronautics and Space Administration/Goddard Space Flight Center (NASA/GSFC). This study is being conducted by the Software Engineering Laboratory (SEL), a research organization sponsored by the Software Engineering Branch of the FDD, which investigates the effectiveness of software engineering technologies when applied to the development of applications software. This software maintenance study began in October 1993 and is being conducted using the Quality Improvement Paradigm (QIP), a process improvement strategy based on three iterative steps: understanding, assessing, and packaging. The preliminary results represent the outcome of the understanding phase, during which SEL researchers characterized the maintenance environment, product, and process. Findings indicate that a combination of quantitative and qualitative analysis is effective for studying the software maintenance process, that additional measures should be collected for maintenance (as opposed to new development), and that characteristics such as effort, error rate, and productivity are best considered on a 'release' basis rather than on a project basis. The research thus far has documented some basic differences between new development and software maintenance. It lays the foundation for further application of the QIP to investigate means of improving the maintenance process and product in the FDD.

  17. Undisturbed upright stance control in the elderly: Part 2. Postural-control impairments of elderly fallers.

    PubMed

    Berger, L; Chuzel, M; Buisson, G; Rougier, P

    2005-09-01

    A common way of predicting falling risks in elderly people can be to study center of pressure (CP) trajectories during undisturbed upright stance maintenance. By estimating the difference between CP and center of gravity (CG) motions (CP - CGv), one can estimate the neuromuscular activity. The results of this study, which included 34 sedentary elderly persons aged over 75 years (21 fallers and 13 nonfallers), demonstrated significantly increased CGh and CP - CGv motions in both axes for the fallers. In addition, the fallers presented larger CGh motions in the mediolateral axis, suggesting an enlarged loading-unloading mechanism, which could have reflected the adoption of a step-initiating strategy. As highlighted by fractional Brownian motion modeling, the distance covered by the CP - CGv motions before the successive control mechanisms switched was enhanced for the fallers in both axes, therefore increasing the risk that the CG would be outside of the base of support.

  18. Operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The major operational areas of the COSMIC center are described. Quantitative data on the software submittals, program verification, and evaluation are presented. The dissemination activities are summarized. Customer services and marketing activities of the center for the calendar year are described. Those activities devoted to the maintenance and support of selected programs are described. A Customer Information system, the COSMIC Abstract Recording System Project, and the COSMIC Microfiche Project are summarized. Operational cost data are summarized.

  19. [Primary care centers and breast-feeding].

    PubMed

    Nacher Fernández, A; Sanantonio Valdearcos, F; Barreda Simó, I; Palau Fuster, G; Palomares Gimeno, M J; Agramunt Soler, G; Fabregat Julve, I; Labordena Barceló, C

    2001-09-01

    To study activities that promote, maintain and support breast feeding in primary care centers in our health district and to evaluate the commitment of health center directors' to breast feeding, their knowledge of the subject, and programs involved in the promotion of natural breast-feeding. A cross-sectional study was carried out through surveys to those in charge of health centers, nursing, pediatric programs and pregnancy programs. Eighty surveys were sent to center and program directors. Answers were obtained from 66.2 %. A total of 6.9 % of the centers had no program or protocol for the promotion and maintenance of breast-feeding, nor did they seek the collaboration of support groups. Only 28.8 % of the centers surveyed carried out activities that provided special support to mothers with difficulties in breast-feeding. In contrast, 80.4 % possessed an adequate register on the incidence of breast-feeding. In 74.5 % of the centers, health professionals were given no specific training on the subject. Only 14.9 % of the centers had rules prohibiting visible leaflets, posters or samples of formula milk. In 84.6 % of the centers, no place was provided where breast-feeding could be carried out, observed, and possible problems corrected. Most of the primary care centers surveyed do not promote programmed activities favoring the promotion and maintenance of breast-feeding. Nevertheless, many centers provide advice on breast-feeding. Collaboration with support groups or other resources that might exist in the community is not generally sought. Specific training in breast-feeding is not given to the centers' health professionals. Only a minority of the centers possesses an appropriate place where mothers can breast-feed if they wish and where the process of breast-feeding can be observed and modified. The results suggest that primary care centers do not provide the necessary support to ensure successful breast-feeding and that they lack the resources necessary to achieve this aim.

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    The ECE application forecasts annual costs of preventive and corrective maintenance for budgeting purposes. Features within the application enable the user to change the specifications of the model to customize your forecast to best fit their needs and support “what if” analysis. Based on the user's selections, the ECE model forecasts annual maintenance costs. Preventive maintenance costs include the cost of labor to perform preventive maintenance activities at the specific frequency and labor rate. Corrective maintenance costs include the cost of labor and the cost of replacement parts. The application presents forecasted maintenance costs for the next five years inmore » two tables: costs by year and costs by site.« less

  1. ASDC RSS Feeds

    Atmospheric Science Data Center

    2013-03-08

    ... Features ASDC's RSS feed with highlights about Earth Science Data at NASA Langley Research Center ASDC Scheduled ... about maintenance   About RSS What is RSS? RSS (Really Simple Syndication, or Rich Site Summary) ...

  2. Kaiser Permanente Northwest

    Cancer.gov

    Kaiser Permanente Northwest's Center for Health Research was created to study health maintenance organizations by scientists were recruited from a variety of fields to study a range of health and medical care issues.

  3. The Science of Sustaining Health Behavior Change: The Health Maintenance Consortium

    PubMed Central

    Ory, Marcia G.; Smith, Matthew Lee; Mier, Nelda; Wernicke, Meghan M.

    2013-01-01

    Objective The Health Maintenance Consortium (HMC) is a multisite Grantee Consortium funded by the National Institutes of Health from 2004–2009. The goal of HMC is to enhance understanding of the long-term maintenance of behavior change, as well as effective strategies for achieving sustainable health promotion and disease prevention. Methods This introductory research synthesis prepared by the Resource Center gives context to this theme issue by providing an overview of the HMC and the articles in this journal. Results It explores the contributions to our conceptualization of behavior change processes and intervention strategies, the trajectory of effectiveness of behavioral and social interventions, and factors influencing the long-term maintenance of behavioral and social interventions. Conclusions Future directions for furthering the science of maintaining behavior change and reducing the gaps between research and practice are recommended. PMID:20604691

  4. Aging Management Guideline for commercial nuclear power plants: Motor control centers; Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Toman, G.; Gazdzinski, R.; O`Hearn, E.

    1994-02-01

    This Aging Management Guideline (AMG) provides recommended methods for effective detection and mitigation of age-related degradation mechanisms in Boiling Water Reactor (BWR) and Pressurized Water Reactor (PWR) commercial nuclear power plant motor control centers important to license renewal. The intent of this AMG is to assist plant maintenance and operations personnel in maximizing the safe, useful life of these components. It also supports the documentation of effective aging management programs required under the License Renewal Rule 10 CFR Part 54. This AMG is presented in a manner that allows personnel responsible for performance analysis and maintenance to compare their plant-specificmore » aging mechanisms (expected or already experienced) and aging management program activities to the more generic results and recommendations presented herein.« less

  5. A pulsed eddy current probe for inspection of support plates from within Alloy-800 steam generator tubes

    NASA Astrophysics Data System (ADS)

    Krause, T. W.; Babbar, V. K.; Underhill, P. R.

    2014-02-01

    Support plate degradation and fouling in nuclear steam generators (SGs) can lead to SG tube corrosion and loss of efficiency. Inspection and monitoring of these conditions can be integrated with preventive maintenance programs, thereby advancing station-life management processes. A prototype pulsed eddy current (PEC) probe, targeting inspection issues associated with SG tubes in SS410 tube support plate structures, has been developed using commercial finite element (FE) software. FE modeling was used to identify appropriate driver and pickup coil configurations for optimum sensitivity to changes in gap and offset for Alloy-800 SG tubes passing through 25 mm thick SS410 support plates. Experimental measurements using a probe that was manufactured based on the modeled configuration, were used to confirm the sensitivity of differential PEC signals to changes in relative position of the tube within the tube support plate holes. Models investigated the effect of shift and tilt of tube with respect to hole centers. Near hole centers and for small shifts, modeled signal amplitudes from the differentially connected coil pairs were observed to change linearly with tube shift. This was in agreement with experimentally measured TEC coil response. The work paves the way for development of a system targeting the inspection and evaluation of support plate structures in steam generators.

  6. Mobility Device Quality Affects Participation Outcomes for People With Disabilities: A Structural Equation Modeling Analysis.

    PubMed

    Magasi, Susan; Wong, Alex; Miskovic, Ana; Tulsky, David; Heinemann, Allen W

    2018-01-01

    To test the effect that indicators of mobility device quality have on participation outcomes in community-dwelling adults with spinal cord injury, traumatic brain injury, and stroke by using structural equation modeling. Survey, cross-sectional study, and model testing. Clinical research space at 2 academic medical centers and 1 free-standing rehabilitation hospital. Community-dwelling adults (N=250; mean age, 48±14.3y) with spinal cord injury, traumatic brain injury, and stroke. Not applicable. The Mobility Device Impact Scale, Patient-Reported Outcomes Measurement Information System Social Function (version 2.0) scale, including Ability to Participate in Social Roles and Activities and Satisfaction with Social Roles and Activities, and the 2 Community Participation Indicators' enfranchisement scales. Details about device quality (reparability, reliability, ease of maintenance) and device type were also collected. Respondents used ambulation aids (30%), manual (34%), and power wheelchairs (30%). Indicators of device quality had a moderating effect on participation outcomes, with 3 device quality variables (repairability, ease of maintenance, device reliability) accounting for 20% of the variance in participation. Wheelchair users reported lower participation enfranchisement than did ambulation aid users. Mobility device quality plays an important role in participation outcomes. It is critical that people have access to mobility devices and that these devices be reliable. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  7. Reliability-centered maintenance for ground-based large optical telescopes and radio antenna arrays

    NASA Astrophysics Data System (ADS)

    Marchiori, G.; Formentin, F.; Rampini, F.

    2014-07-01

    In the last years, EIE GROUP has been more and more involved in large optical telescopes and radio antennas array projects. In this frame, the paper describes a fundamental aspect of the Logistic Support Analysis (LSA) process, that is the application of the Reliability-Centered Maintenance (RCM) methodology for the generation of maintenance plans for ground-based large optical telescopes and radio antennas arrays. This helps maintenance engineers to make sure that the telescopes continue to work properly, doing what their users require them to do in their present operating conditions. The main objective of the RCM process is to establish the complete maintenance regime, with the safe minimum required maintenance, carried out without any risk to personnel, telescope and subsystems. At the same time, a correct application of the RCM allows to increase the cost effectiveness, telescope uptime and items availability, and to provide greater understanding of the level of risk that the organization is managing. At the same time, engineers shall make a great effort since the initial phase of the project to obtain a telescope requiring easy maintenance activities and simple replacement of the major assemblies, taking special care on the accesses design and items location, implementation and design of special lifting equipment and handling devices for the heavy items. This maintenance engineering framework is based on seven points, which lead to the main steps of the RCM program. The initial steps of the RCM process consist of: system selection and data collection (MTBF, MTTR, etc.), definition of system boundaries and operating context, telescope description with the use of functional block diagrams, and the running of a FMECA to address the dominant causes of equipment failure and to lay down the Critical Items List. In the second part of the process the RCM logic is applied, which helps to determine the appropriate maintenance tasks for each identified failure mode. Once the logic is completed for all the analyzed items, the resulting Maintenance Program is compiled in order to preserve all the system important functions and to rationalize the tasks periodicities. Lastly, the RCM is kept alive throughout the entire life of the telescope, where the effectiveness of the maintenance is constantly reviewed and adjusted on the basis of the "lesson learned". In addition to the RCM analysis methodology, a second basic concept is applied for the telescope maintenance: to design and install components in such a manner to restore a failure and to perform servicing procedures as close as possible to the telescope, maximizing the replacement of Line Replaceable Units (LRUs) or Shop Replaceable Units (SRUs), rather than repair on-equipment.

  8. Selecting statistical model and optimum maintenance policy: a case study of hydraulic pump.

    PubMed

    Ruhi, S; Karim, M R

    2016-01-01

    Proper maintenance policy can play a vital role for effective investigation of product reliability. Every engineered object such as product, plant or infrastructure needs preventive and corrective maintenance. In this paper we look at a real case study. It deals with the maintenance of hydraulic pumps used in excavators by a mining company. We obtain the data that the owner had collected and carry out an analysis and building models for pump failures. The data consist of both failure and censored lifetimes of the hydraulic pump. Different competitive mixture models are applied to analyze a set of maintenance data of a hydraulic pump. Various characteristics of the mixture models, such as the cumulative distribution function, reliability function, mean time to failure, etc. are estimated to assess the reliability of the pump. Akaike Information Criterion, adjusted Anderson-Darling test statistic, Kolmogrov-Smirnov test statistic and root mean square error are considered to select the suitable models among a set of competitive models. The maximum likelihood estimation method via the EM algorithm is applied mainly for estimating the parameters of the models and reliability related quantities. In this study, it is found that a threefold mixture model (Weibull-Normal-Exponential) fits well for the hydraulic pump failures data set. This paper also illustrates how a suitable statistical model can be applied to estimate the optimum maintenance period at a minimum cost of a hydraulic pump.

  9. Alternative Fuels Data Center

    Science.gov Websites

    quality nonattainment and maintenance areas. The VALE Program provides funding through the Airport quality improvements. For more information, see the VALE Program website. (Reference 49 U.S. Code 47139

  10. Advertising representation, treatment menu and economic circulation of substance misuse treatment centers in Iran: a rapid survey based on newspaper advertisements.

    PubMed

    Rezaee, Sobhan; Ekhtiari, Hamed

    2014-05-01

    Daily newspapers are the main platform by which substance misuse treatment (SMT) centers in Iran advertise their services. However, these advertisements provide little information on treatment options or costs. The current research aimed to use advertisements to compile a schema of treatment services and to map the extent and nature of drug treatments offered. During a four-week period (April to May) in 2009, the four most popular Persian newspapers printed in Tehran were reviewed. Across these publications 1704 advertisements were posted by 66 SMT centers. Each center was then contacted by telephone to complete a structured interview about services offered and related costs. The advertisements were also decoded through a quantitative contextual analysis method. On average, each SMT center published 26 advertisements during the review period, costing 421 US$. In addition, advertisements included word signifiers in six main categories including centers' introduction (100%), treatment types (91%), treatment duration (68%), medicines (70%), treatment features (60%) and psychological facilities (52%). The three detoxification programs advertised were the rapid method (57% of clinics, 443.23 US$), buprenorphine (68%, 265 US$) and methadone (71%, 137 US$). More than 90% of the centers in Tehran were offering methadone maintenance (99 US$, per month). SMT services in the Iranian market ranged from abstinence to maintenance programs, with opiates as the main focus. This review of centers' advertisements provides an indirect but rapidly obtained picture of the drug misuse treatment network. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Maintenance and enhancement of long-term multiple socioeconomic benefits to meet the needs of societies. Criterion 6.

    Treesearch

    Ken Skog; James Howard; Susan Alexander; Ken Cordell; Marla Emery; Evan Mercer; Shela Mou; Kristen Magis; Maureen McDonough

    2011-01-01

    This report provides a comprehensive picture of current conditions and trends in our Nation's forests, its forest industries, and its forest communities. Although the first five criteria are centered in the environmental sphere of sustainability (with the exception of Criterion 2, which clearly overlaps the economic sphere), Criterion 6 is centered firmly in the...

  12. Challenges for Engineering Design, Construction, and Maintenance of Infrastructure in Afghanistan

    DTIC Science & Technology

    2010-11-01

    applied engineering expertise that collectively can solve challenging infra- structure problems. USACE-ERDC’s researchers and engineers are field...Development Center (ERDC) possesses a unique combination of basic research and applied engineering expertise that collectively can solve challenging...restoration, and other projects. The USACE Engineer Research and Development Center (ERDC) possesses a unique combination of basic research and applied

  13. Do/Will You Remember? Taking a Child Care Program's Past into the Future.

    ERIC Educational Resources Information Center

    Ranck, Edna Runnels

    1995-01-01

    Gives basic information about establishing an archive in a limited amount of space and accommodating some special materials. Discusses why a day care center or similar facility should bother to keep such records. Outlines start-up and maintenance tasks and includes a useful table of types of archival documents and artifacts in child care centers.…

  14. The distinctive germinal center phase of IgE+ B lymphocytes limits their contribution to the classical memory response

    USDA-ARS?s Scientific Manuscript database

    The mechanisms involved in the maintenance of memory IgE responses are poorly understood, and the role played by germinal center (GC) IgE+ cells in memory responses is particularly unclear. IgE B cell differentiation is characterized by a transient GC phase, a bias towards the plasma cell (PC) fate,...

  15. Advanced U.S. military aircraft battery systems

    NASA Astrophysics Data System (ADS)

    Flake, Richard A.; Eskra, Michael D.

    1990-04-01

    While most USAF aircraft currently use vented Ni-Cd for dc electrical power and emergency power, as well as the powering of lights and instruments prior to engine starting, these batteries have high maintenance requirements, low reliability, and no built-in testing capability with which to check battery health prior to flight. The USAF Wright R&D Center accordingly initiated its Advanced Maintenance-Free NiCd Battery System development program in 1986, in order to develop a sealed Ni-Cd battery which would remain maintenance-free over a period of three years. Attention is being given to a high power bipolar battery design in which there are no individual cell cases or cell interconnects.

  16. Concept of a programmable maintenance processor applicable to multiprocessing systems

    NASA Technical Reports Server (NTRS)

    Glover, Richard D.

    1988-01-01

    A programmable maintenance processor concept applicable to multiprocessing systems has been developed at the NASA Ames Research Center's Dryden Flight Research Facility. This stand-alone-processor is intended to provide support for system and application software testing as well as hardware diagnostics. An initial machanization has been incorporated into the extended aircraft interrogation and display system (XAIDS) which is multiprocessing general-purpose ground support equipment. The XAIDS maintenance processor has independent terminal and printer interfaces and a dedicated magnetic bubble memory that stores system test sequences entered from the terminal. This report describes the hardware and software embodied in this processor and shows a typical application in the check-out of a new XAIDS.

  17. 76 FR 67633 - Airworthiness Directives; Dassault Aviation Model Mystere-Falcon 50 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-02

    ...) of section 5-10 of the Recommended Maintenance Schedules chapter of the Aircraft Maintenance...) of section 5-10 of the Recommended Maintenance Schedules chapter of the Aircraft Maintenance... Dassault Falcon 50/ 50EX Maintenance Procedure 57-607, Non-Destructive Check of Flap Tracks 2 and 5, of...

  18. Multiple Shh signaling centers participate in fungiform papilla and taste bud formation and maintenance

    PubMed Central

    Liu, H-X; Ermilov, A; Grachtchouk, M; Li, L; Gumucio, DL; Dlugosz, AA; Mistretta, CM

    2014-01-01

    The adult fungiform taste papilla is a complex of specialized cell types residing in the stratified squamous tongue epithelium. This unique sensory organ includes taste buds, papilla epithelium and lateral walls that extend into underlying connective tissue to surround a core of lamina propria cells. Fungiform papillae must contain long-lived, sustaining or stem cells and short-lived, maintaining or transit amplifying cells that support the papilla and specialized taste buds. Shh signaling has established roles in supporting fungiform induction, development and patterning. However, for a full understanding of how Shh transduced signals act in tongue, papilla and taste bud formation and maintenance, it is necessary to know where and when the Shh ligand and pathway components are positioned. We used immunostaining, in situ hybridization and mouse reporter strains for Shh, Ptch1, Gli1 and Gli2-expression and proliferation markers to identify cells that participate in hedgehog signaling. Whereas there is a progressive restriction in location of Shh ligand-expressing cells, from placode and apical papilla cells to taste bud cells only, a surrounding population of Ptch1 and Gli1 responding cells is maintained in signaling centers throughout papilla and taste bud development and differentiation. The Shh signaling targets are in regions of active cell proliferation. Using genetic-inducible lineage tracing for Gli1-expression, we found that Shh-responding cells contribute not only to maintenance of filiform and fungiform papillae, but also to taste buds. A requirement for normal Shh signaling in fungiform papilla, taste bud and filiform papilla maintenance was shown by Gli2 constitutive activation. We identified proliferation niches where Shh signaling is active and suggest that epithelial and mesenchymal compartments harbor potential stem and/or progenitor cell zones. In all, we report a set of hedgehog signaling centers that regulate development and maintenance of taste organs, the fungiform papilla and taste bud, and surrounding lingual cells. Shh signaling has roles in forming and maintaining fungiform papillae and taste buds, most likely via stage-specific autocrine and/or paracrine mechanisms, and by engaging epithelial/mesenchymal interactions. PMID:23916850

  19. Multiple Shh signaling centers participate in fungiform papilla and taste bud formation and maintenance.

    PubMed

    Liu, Hong Xiang; Ermilov, Alexandre; Grachtchouk, Marina; Li, Libo; Gumucio, Deborah L; Dlugosz, Andrzej A; Mistretta, Charalotte M

    2013-10-01

    The adult fungiform taste papilla is a complex of specialized cell types residing in the stratified squamous tongue epithelium. This unique sensory organ includes taste buds, papilla epithelium and lateral walls that extend into underlying connective tissue to surround a core of lamina propria cells. Fungiform papillae must contain long-lived, sustaining or stem cells and short-lived, maintaining or transit amplifying cells that support the papilla and specialized taste buds. Shh signaling has established roles in supporting fungiform induction, development and patterning. However, for a full understanding of how Shh transduced signals act in tongue, papilla and taste bud formation and maintenance, it is necessary to know where and when the Shh ligand and pathway components are positioned. We used immunostaining, in situ hybridization and mouse reporter strains for Shh, Ptch1, Gli1 and Gli2-expression and proliferation markers to identify cells that participate in hedgehog signaling. Whereas there is a progressive restriction in location of Shh ligand-expressing cells, from placode and apical papilla cells to taste bud cells only, a surrounding population of Ptch1 and Gli1 responding cells is maintained in signaling centers throughout papilla and taste bud development and differentiation. The Shh signaling targets are in regions of active cell proliferation. Using genetic-inducible lineage tracing for Gli1-expression, we found that Shh-responding cells contribute not only to maintenance of filiform and fungiform papillae, but also to taste buds. A requirement for normal Shh signaling in fungiform papilla, taste bud and filiform papilla maintenance was shown by Gli2 constitutive activation. We identified proliferation niches where Shh signaling is active and suggest that epithelial and mesenchymal compartments harbor potential stem and/or progenitor cell zones. In all, we report a set of hedgehog signaling centers that regulate development and maintenance of taste organs, the fungiform papilla and taste bud, and surrounding lingual cells. Shh signaling has roles in forming and maintaining fungiform papillae and taste buds, most likely via stage-specific autocrine and/or paracrine mechanisms, and by engaging epithelial/mesenchymal interactions. © 2013 Elsevier Inc. All rights reserved.

  20. Green Infrastructure Research at EPA's Edison Environmental Center

    EPA Science Inventory

    The presentation outline includes: (1) Green infrastructure research objectives (2) Introduction to ongoing research projects - Aspects of design, construction, and maintenence that affect function - Real-world applications of GI research

  1. Department of the Navy Justification of Estimates for Fiscal Year 1987 Submitted to Congress February 1986. Operation & Maintenance, Navy. Book 3. Budget Activity 3: Intelligence & Communications Budget Activity 8: Training, Medical & OGPA Budget Activity 9: Administration & Assoc Acts. Budget Activity 10: Support to Other Nations

    DTIC Science & Technology

    1986-02-01

    ionospheric sensing 118 I device, provide more reliable comnunications, especially when HF propagation is uncertain, by determining which frequencies...the Fleet Numerical Oceanography Center computer systems. GDEM generates a sound velocity profile from the surface to the sea floor at every 1/2...degrees of lat/log for the Northern Hemisphere oceans. GDEM is a Navy standard data base for all acoustic models. 18) Software Improvement Plan (SIP) as 600

  2. Maintaining close relationships: gratitude as a motivator and a detector of maintenance behavior.

    PubMed

    Kubacka, Kaska E; Finkenauer, Catrin; Rusbult, Caryl E; Keijsers, Loes

    2011-10-01

    This research examined the dual function of gratitude for relationship maintenance in close relationships. In a longitudinal study among married couples, the authors tested the dyadic effects of gratitude over three time points for approximately 4 years following marriage. They found that feelings of gratitude toward a partner stem from the partner's relationship maintenance behaviors, partly because such behaviors create the perception of responsiveness to one's needs. In turn, gratitude motivates partners to engage in relationship maintenance. Hence, the present model emphasizes that gratitude between close partners (a) originates from partners' relationship maintenance behaviors and the perception of a partner's responsiveness and (b) promotes a partner's reciprocal maintenance behaviors. Thus, the authors' findings add credence to their model, in that gratitude contributes to a reciprocal process of relationship maintenance, whereby each partner's maintenance behaviors, perceptions of responsiveness, and feelings of gratitude feed back on and influence the other's behaviors, perceptions, and feelings.

  3. Alternative Fuels Data Center: CNG Fuel System and Tank Maintenance

    Science.gov Websites

    in this section... Natural Gas Basics Benefits & Considerations Stations Vehicles Availability fuel containers best practices document for more information. CNG Tank Inspection Performing a regular

  4. Knowledge representation and user interface concepts to support mixed-initiative diagnosis

    NASA Technical Reports Server (NTRS)

    Sobelman, Beverly H.; Holtzblatt, Lester J.

    1989-01-01

    The Remote Maintenance Monitoring System (RMMS) provides automated support for the maintenance and repair of ModComp computer systems used in the Launch Processing System (LPS) at Kennedy Space Center. RMMS supports manual and automated diagnosis of intermittent hardware failures, providing an efficient means for accessing and analyzing the data generated by catastrophic failure recovery procedures. This paper describes the design and functionality of the user interface for interactive analysis of memory dump data, relating it to the underlying declarative representation of memory dumps.

  5. Who is Using Telehealth in Primary Care? Safety Net Clinics and Health Maintenance Organizations (HMOs).

    PubMed

    Coffman, Megan; Moore, Miranda; Jetty, Anuradha; Klink, Kathleen; Bazemore, Andrew

    2016-01-01

    Despite rapid advancements in telehealth services, only 15% of family physicians in a 2014 survey reported using telehealth; use varied widely according to the physician's practice setting or designation. Users were significantly more likely than nonusers to work in federally designated "safety net" clinics and health maintenance organizations (HMOs) but not more likely than nonusers to report working in a patient-centered medical home (PCMH) or accountable care organization. © Copyright 2016 by the American Board of Family Medicine.

  6. Buildings Lean Maintenance Implementation Model

    NASA Astrophysics Data System (ADS)

    Abreu, Antonio; Calado, João; Requeijo, José

    2016-11-01

    Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

  7. MCCx C3I Control Center Interface Emulator

    NASA Technical Reports Server (NTRS)

    Mireles, James R.

    2010-01-01

    This slide presentation reviews the project to develop and demonstrate alternate Information Technologies and systems for new Mission Control Centers that will reduce the cost of facility development, maintenance and operational costs and will enable more efficient cost and effective operations concepts for ground support operations. The development of a emulator for the Control Center capability will enable the facilities to conduct the simulation requiring interactivity with the Control Center when it is off line or unavailable, and it will support testing of C3I interfaces for both command and telemetry data exchange messages (DEMs).

  8. Effectiveness of Gross Model-Based Emotion Regulation Strategies Training on Anger Reduction in Drug-Dependent Individuals and its Sustainability in Follow-up

    PubMed Central

    Massah, Omid; Sohrabi, Faramarz; A’azami, Yousef; Doostian, Younes; Farhoudian, Ali; Daneshmand, Reza

    2016-01-01

    Background Emotion plays an important role in adapting to life changes and stressful events. Difficulty regulating emotions is one of the problems drug abusers often face, and teaching these individuals to express and manage their emotions can be effective on improving their difficult circumstances. Objectives The present study aimed to determine the effectiveness of the Gross model-based emotion regulation strategies training on anger reduction in drug-dependent individuals. Patients and Methods The present study had a quasi-experimental design wherein pretest-posttest evaluations were applied using a control group. The population under study included addicts attending Marivan’s methadone maintenance therapy centers in 2012 - 2013. Convenience sampling was used to select 30 substance-dependent individuals undergoing maintenance treatment who were then randomly assigned to the experiment and control groups. The experiment group received its training in eight two-hour sessions. Data were analyzed using analysis of co-variance and paired t-test. Results There was significant reduction in anger symptoms of drug-dependent individuals after gross model based emotion regulation training (ERT) (P < 0.001). Moreover, the effectiveness of the training on anger was persistent in the follow-up period. Conclusions Symptoms of anger in drug-dependent individuals of this study were reduced by gross model-based emotion regulation strategies training. Based on the results of this study, we may conclude that the gross model based emotion regulation strategies training can be applied alongside other therapies to treat drug abusers undergoing rehabilitation. PMID:27162759

  9. Mathematical Modelling of Liner Piston Maintenance Activity using Field Data to Minimize Overhauling Time and Human Energy Consumption

    NASA Astrophysics Data System (ADS)

    Belkhode, Pramod Namdeorao

    2017-06-01

    Field data based model is proposed to reduce the overhauling time and human energy consumed in liner piston maintenance activity so as to increase the productivity of liner piston maintenance activity. The independent variables affecting the phenomenon such as anthropometric parameters of workers (Eastman Kodak Co. Ltd in Section VIA Appendix-A: Anthropometric Data. Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 1), workers parameters, specification of liner piston data, specification of tools used in liner piston maintenance activity, specification of solvents, axial clearance of big end bearing and bolt elongation, workstation data (Eastman Kodak Co. Ltd in Work Place Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 2) and extraneous variables, namely, temperature, humidity at workplace, illumination at workplace and noise at workplace (Eastman Kodak Co. Ltd in Chapter V Environment Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 3) are taken into account. The model is formulated for dependent variables of liner piston maintenance activity to minimize the overhauling time and human energy consumption so as to improve the productivity of liner piston maintenance activity. The developed model can predict the performance of liner piston maintenance activity which involves man and machine system (Schenck in Theories of Engineering Experimentation, Mc-Graw Hill, New York 4). The model is then optimized by optimization technique and the sensitivity analysis of the model has also been estimated.

  10. Dual role of wingless signaling in stem-like hematopoietic precursor maintenance in Drosophila.

    PubMed

    Sinenko, Sergey A; Mandal, Lolitika; Martinez-Agosto, Julian A; Banerjee, Utpal

    2009-05-01

    In Drosophila, blood development occurs in a specialized larval hematopoietic organ, the lymph gland (LG), within which stem-like hemocyte precursors or prohemocytes differentiate to multiple blood cell types. Here we show that components of the Wingless (Wg) signaling pathway are expressed in prohemocytes. Loss- and gain-of-function analysis indicates that canonical Wg signaling is required for maintenance of prohemocytes and negatively regulates their differentiation. Wg signals locally in a short-range fashion within different compartments of the LG. In addition, Wg signaling positively regulates the proliferation and maintenance of cells that function as a hematopoietic niche in Drosophila, the posterior signaling center (PSC), and in the proliferation of crystal cells. Our studies reveal a conserved function of Wg signaling in the maintenance of stem-like blood progenitors and reveal an involvement of this pathway in the regulation of hemocyte differentiation through its action in the hematopoietic niche.

  11. Dynamical model of birdsong maintenance and control

    NASA Astrophysics Data System (ADS)

    Abarbanel, Henry D. I.; Talathi, Sachin S.; Mindlin, Gabriel; Rabinovich, Misha; Gibb, Leif

    2004-11-01

    The neuroethology of song learning, production, and maintenance in songbirds presents interesting similarities to human speech. We have developed a biophysical model of the manner in which song could be maintained in adult songbirds. This model may inform us about the human counterpart to these processes. In songbirds, signals generated in nucleus High Vocal center (HVc) follow a direct route along a premotor pathway to the robust nucleus of the archistriatum (RA) as well as an indirect route to RA through the anterior forebrain pathway (AFP): the neurons of RA are innervated from both sources. HVc expresses very sparse bursts of spikes having interspike intervals of about 2ms . The expressions of these bursts arrive at the RA with a time difference ΔT≈50±10ms between the two pathways. The observed combination of AMPA and NMDA receptors at RA projection neurons suggests that long-term potentiation and long-term depression can both be induced by spike timing plasticity through the pairing of the HVc and AFP signals. We present a dynamical model that stabilizes this synaptic plasticity through a feedback from the RA to the AFP using known connections. The stabilization occurs dynamically and is absent when the RA→AFP connection is removed. This requires a dynamical selection of ΔT . The model does this, and ΔT lies within the observed range. Our model represents an illustration of a functional consequence of activity-dependent plasticity directly connected with neuroethological observations. Within the model the parameters of the AFP, and thus the magnitude of ΔT , can also be tuned to an unstable regime. This means that destabilization might be induced by neuromodulation of the AFP.

  12. Integrating O/S models during conceptual design, part 3

    NASA Technical Reports Server (NTRS)

    Ebeling, Charles E.

    1994-01-01

    Space vehicles, such as the Space Shuttle, require intensive ground support prior to, during, and after each mission. Maintenance is a significant part of that ground support. All space vehicles require scheduled maintenance to ensure operability and performance. In addition, components of any vehicle are not one-hundred percent reliable so they exhibit random failures. Once detected, a failure initiates unscheduled maintenance on the vehicle. Maintenance decreases the number of missions which can be completed by keeping vehicles out of service so that the time between the completion of one mission and the start of the next is increased. Maintenance also requires resources such as people, facilities, tooling, and spare parts. Assessing the mission capability and resource requirements of any new space vehicle, in addition to performance specification, is necessary to predict the life cycle cost and success of the vehicle. Maintenance and logistics support has been modeled by computer simulation to estimate mission capability and resource requirements for evaluation of proposed space vehicles. The simulation was written with Simulation Language for Alternative Modeling II (SLAM II) for execution on a personal computer. For either one or a fleet of space vehicles, the model simulates the preflight maintenance checks, the mission and return to earth, and the post flight maintenance in preparation to be sent back into space. THe model enables prediction of the number of missions possible and vehicle turn-time (the time between completion of one mission and the start of the next) given estimated values for component reliability and maintainability. The model also facilitates study of the manpower and vehicle requirements for the proposed vehicle to meet its desired mission rate. This is the 3rd part of a 3 part technical report.

  13. Maintenance = reuse-oriented software development

    NASA Technical Reports Server (NTRS)

    Basili, Victor R.

    1989-01-01

    Maintenance is viewed as a reuse process. In this context, a set of models that can be used to support the maintenance process is discussed. A high level reuse framework is presented that characterizes the object of reuse, the process for adapting that object for its target application, and the reused object within its target application. Based upon this framework, a qualitative comparison is offered of the three maintenance process models with regard to their strengths and weaknesses and the circumstances in which they are appropriate. To provide a more systematic, quantitative approach for evaluating the appropriateness of the particular maintenance model, a measurement scheme is provided, based upon the reuse framework, in the form of an organized set of questions that need to be answered. To support the reuse perspective, a set of reuse enablers are discussed.

  14. Design and maintenance of subsurface gravel wetlands.

    DOT National Transportation Integrated Search

    2015-02-01

    This report summarizes the University of New Hampshire Stormwater Center (UNHSC) evaluation of : a review of Subsurface Gravel Wetlands design and specifications used by the New Hampshire : Department of Transportation (NHDOT or Department). : Subsur...

  15. 76 FR 3157 - Joint Operations Center Relocation Project, Sacramento County, CA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-19

    ... Water Resources (DWR), the lead State agency, will prepare a joint EIS/EIR for the proposed Joint... following departments: DWR's Division of Operations and Maintenance, Operations Control Office, State Water...

  16. MSFC Respiratory Protection Services

    NASA Technical Reports Server (NTRS)

    CoVan, James P.

    1999-01-01

    An overview of the Marshall Space Flight Center Respiratory Protection program is provided in this poster display. Respiratory protection personnel, building, facilities, equipment, customers, maintenance and operational activities, and Dynatech fit testing details are described and illustrated.

  17. Design considerations and rationale of a multi-center trial to sustain weight loss: the Weight Loss Maintenance Trial.

    PubMed

    Brantley, Phillip; Appel, Lawrence; Hollis, Jack; Stevens, Victor; Ard, Jamy; Champagne, Catherine; Elmer, Patricia; Harsha, David; Myers, Valerie; Proschan, Michael; William, Vollmer; Svetkey, Laura

    2008-01-01

    The Weight Loss Maintenance Trial (WLM) is a multi-center, randomized, controlled trial that compares the effects of two 30-month maintenance interventions, i.e., Personal Contact (PC) and Interactive Technology (IT) to a self-directed usual care control group (SD), in overweight or obese individuals who are at high risk for cardiovascular disease. This paper provides an overview of the design and methods, and design considerations and lessons learned from this trial. All participants received a 6-month behavioral weight loss program consisting of weekly group sessions. Participants who lost 4 kg were randomized to one of three conditions (PC, IT, or SD). The PC condition provided monthly contacts with an interventionist primarily via telephone and quarterly face-to-face visits. The IT condition provided frequent, individualized contact through a tailored, website system. Both the PC and IT maintenance programs encouraged the DASH dietary pattern and employed theory-based behavioral techniques to promote maintenance. Design considerations included choice of study population, frequency and type of intervention visits, and choice of primary outcome. Overweight or obese persons with CVD risk factors were studied. The pros and cons of studying this population while excluding others are presented. We studied intervention contact strategies that made fewer demands on participant time and travel, while providing frequent opportunities for interaction. The primary outcome variable for the trial was change in weight from randomization to end of follow-up (30 months). Limits to generalizability are discussed. Individuals in need of weight loss strategies may have been excluded due to barriers associated with internet use. Other participants may have been excluded secondary to a comorbid condition. This paper highlights the design and methods of WLM and informs readers of discussions of critical issues and lessons learned from the trial.

  18. GSOSTATS Database: USAF Synchronous Satellite Catalog Data Conversion Software. User's Guide and Software Maintenance Manual, Version 2.1

    NASA Technical Reports Server (NTRS)

    Mallasch, Paul G.; Babic, Slavoljub

    1994-01-01

    The United States Air Force (USAF) provides NASA Lewis Research Center with monthly reports containing the Synchronous Satellite Catalog and the associated Two Line Mean Element Sets. The USAF Synchronous Satellite Catalog supplies satellite orbital parameters collected by an automated monitoring system and provided to Lewis Research Center as text files on magnetic tape. Software was developed to facilitate automated formatting, data normalization, cross-referencing, and error correction of Synchronous Satellite Catalog files before loading into the NASA Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS). This document contains the User's Guide and Software Maintenance Manual with information necessary for installation, initialization, start-up, operation, error recovery, and termination of the software application. It also contains implementation details, modification aids, and software source code adaptations for use in future revisions.

  19. The General-Use Nodal Network Solver (GUNNS) Modeling Package for Space Vehicle Flow System Simulation

    NASA Technical Reports Server (NTRS)

    Harvey, Jason; Moore, Michael

    2013-01-01

    The General-Use Nodal Network Solver (GUNNS) is a modeling software package that combines nodal analysis and the hydraulic-electric analogy to simulate fluid, electrical, and thermal flow systems. GUNNS is developed by L-3 Communications under the TS21 (Training Systems for the 21st Century) project for NASA Johnson Space Center (JSC), primarily for use in space vehicle training simulators at JSC. It has sufficient compactness and fidelity to model the fluid, electrical, and thermal aspects of space vehicles in real-time simulations running on commodity workstations, for vehicle crew and flight controller training. It has a reusable and flexible component and system design, and a Graphical User Interface (GUI), providing capability for rapid GUI-based simulator development, ease of maintenance, and associated cost savings. GUNNS is optimized for NASA's Trick simulation environment, but can be run independently of Trick.

  20. Using the stages of change model to counsel victims of intimate partner violence.

    PubMed

    Frasier, P Y; Slatt, L; Kowlowitz, V; Glowa, P T

    2001-05-01

    Medical expenses from intimate partner violence (IPV) total between $3 and $5 billion annually. Many abuse victims are exposed to serious injuries, and are likely to see their physicians more frequently than other patients. Practitioners must have a reliable and realistic approach to counseling patients who are victims of IPV. This paper presents the stages of change model as a practical guide for counseling victims. Through patients' responses to a series of questions, the practitioner can identify which of five stages of change (precontemplation, preparation, contemplation, action, maintenance) the patient is in. The practitioner can then employ stage-specific strategies for counseling the patient. Using this model shifts the definition of successful outcome from the traditional focus of trying to 'fix the problem' to a patient-centered focus, working with the patient to explore the most effective strategies given his/her stage of change.

  1. Ideas for Planning Your Instructional Materials Center. Administration; Conference and Independent Study; Listening and Viewing; Materials Production; Reading, Research and Borrowing; Storage and Maintenance.

    ERIC Educational Resources Information Center

    Massachusetts School Building Assistance Commission, Boston.

    This report suggests that the instructional materials center be flexible for multigroup activities, expansible for future physical growth, and central to the instructional program. Area specifications are given for the following areas: materials research, small groups, cataloging and processing materials, and listening and speaking, and for a dark…

  2. Acquiring Technical Data With Renewable Real Options

    DTIC Science & Technology

    2016-04-30

    Development, and Engineering Center, 2009). Faced with diminishing sources for M2 .50 caliber machine gun parts , an Army engineering center entered the...data needed for life cycle sustainment functions such as maintenance or competitive spare parts procurement, but this expectation is more complicated...than it seems (DoD, 2015). The needs and timing for competitive spare parts procurement are uncertain, and changes in system configuration or

  3. Attention supports verbal short-term memory via competition between dorsal and ventral attention networks.

    PubMed

    Majerus, Steve; Attout, Lucie; D'Argembeau, Arnaud; Degueldre, Christian; Fias, Wim; Maquet, Pierre; Martinez Perez, Trecy; Stawarczyk, David; Salmon, Eric; Van der Linden, Martial; Phillips, Christophe; Balteau, Evelyne

    2012-05-01

    Interactions between the neural correlates of short-term memory (STM) and attention have been actively studied in the visual STM domain but much less in the verbal STM domain. Here we show that the same attention mechanisms that have been shown to shape the neural networks of visual STM also shape those of verbal STM. Based on previous research in visual STM, we contrasted the involvement of a dorsal attention network centered on the intraparietal sulcus supporting task-related attention and a ventral attention network centered on the temporoparietal junction supporting stimulus-related attention. We observed that, with increasing STM load, the dorsal attention network was activated while the ventral attention network was deactivated, especially during early maintenance. Importantly, activation in the ventral attention network increased in response to task-irrelevant stimuli briefly presented during the maintenance phase of the STM trials but only during low-load STM conditions, which were associated with the lowest levels of activity in the dorsal attention network during encoding and early maintenance. By demonstrating a trade-off between task-related and stimulus-related attention networks during verbal STM, this study highlights the dynamics of attentional processes involved in verbal STM.

  4. Modeling and Simulation of HVAC Faulty Operations and Performance Degradation due to Maintenance Issues

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wang, Liping; Hong, Tianzhen

    Almost half of the total energy used in the U.S. buildings is consumed by heating, ventilation and air conditionings (HVAC) according to EIA statistics. Among various driving factors to energy performance of building, operations and maintenance play a significant role. Many researches have been done to look at design efficiencies and operational controls for improving energy performance of buildings, but very few study the impacts of HVAC systems maintenance. Different practices of HVAC system maintenance can result in substantial differences in building energy use. If a piece of HVAC equipment is not well maintained, its performance will degrade. If sensorsmore » used for control purpose are not calibrated, not only building energy usage could be dramatically increased, but also mechanical systems may not be able to satisfy indoor thermal comfort. Properly maintained HVAC systems can operate efficiently, improve occupant comfort, and prolong equipment service life. In the paper, maintenance practices for HVAC systems are presented based on literature reviews and discussions with HVAC engineers, building operators, facility managers, and commissioning agents. We categorize the maintenance practices into three levels depending on the maintenance effort and coverage: 1) proactive, performance-monitored maintenance; 2) preventive, scheduled maintenance; and 3) reactive, unplanned or no maintenance. A sampled list of maintenance issues, including cooling tower fouling, boiler/chiller fouling, refrigerant over or under charge, temperature sensor offset, outdoor air damper leakage, outdoor air screen blockage, outdoor air damper stuck at fully open position, and dirty filters are investigated in this study using field survey data and detailed simulation models. The energy impacts of both individual maintenance issue and combined scenarios for an office building with central VAV systems and central plant were evaluated by EnergyPlus simulations using three approaches: 1) direct modeling with EnergyPlus, 2) using the energy management system feature of EnergyPlus, and 3) modifying EnergyPlus source code. The results demonstrated the importance of maintenance for HVAC systems on energy performance of buildings. The research is intended to provide a guideline to help practitioners and building operators to gain the knowledge of maintaining HVAC systems in efficient operations, and prioritize HVAC maintenance work plan. The paper also discusses challenges of modeling building maintenance issues using energy simulation programs.« less

  5. The Sortie-Generation Model System. Volume 5. Maintenance Subsystem

    DTIC Science & Technology

    1981-09-01

    Compuger RoanutI f and moidel 11, Computer operatinS system 17, Proorammino largualviso IS. Numlier of .ugic proltsm Hoewl -3 CSCobol 600 stuscomentm...THE SORTIE-GENERATION MODEL SYSTEM OC’ VOLUME V MAINTENANCE SUBSYSTEM September 1981 Robert S. Greenberg 05$ Prepared pursuant to Department of...Generation Model System Volume V Maintenance Subsystem 6. PERFORMING ORG. REPORT NUMBER LMI Task- L102 7. AUTHOR(a) 8. CONTRACT OR GRANT NUMBER(a

  6. Architecture and Key Techniques of Augmented Reality Maintenance Guiding System for Civil Aircrafts

    NASA Astrophysics Data System (ADS)

    hong, Zhou; Wenhua, Lu

    2017-01-01

    Augmented reality technology is introduced into the maintenance related field for strengthened information in real-world scenarios through integration of virtual assistant maintenance information with real-world scenarios. This can lower the difficulty of maintenance, reduce maintenance errors, and improve the maintenance efficiency and quality of civil aviation crews. Architecture of augmented reality virtual maintenance guiding system is proposed on the basis of introducing the definition of augmented reality and analyzing the characteristics of augmented reality virtual maintenance. Key techniques involved, such as standardization and organization of maintenance data, 3D registration, modeling of maintenance guidance information and virtual maintenance man-machine interaction, are elaborated emphatically, and solutions are given.

  7. Methods of increasing efficiency and maintainability of pipeline systems

    NASA Astrophysics Data System (ADS)

    Ivanov, V. A.; Sokolov, S. M.; Ogudova, E. V.

    2018-05-01

    This study is dedicated to the issue of pipeline transportation system maintenance. The article identifies two classes of technical-and-economic indices, which are used to select an optimal pipeline transportation system structure. Further, the article determines various system maintenance strategies and strategy selection criteria. Meanwhile, the maintenance strategies turn out to be not sufficiently effective due to non-optimal values of maintenance intervals. This problem could be solved by running the adaptive maintenance system, which includes a pipeline transportation system reliability improvement algorithm, especially an equipment degradation computer model. In conclusion, three model building approaches for determining optimal technical systems verification inspections duration were considered.

  8. Secretary | Center for Cancer Research

    Cancer.gov

    The Basic Science Program (BSP) pursues independent, multidisciplinary research programs in basic or applied molecular biology, immunology, retrovirology, cancer biology, or human genetics. Research efforts and support are an integral part of the Center for Cancer Research (CCR) at the Frederick national Laboratory for Cancer Research (FNLCR). The BSP Office provides procurement and logistical assistance in support of the research activities of the Center for Cancer Research.KEY ROLES/RESPONSIBILITIES The Secretary III will: Provide heavy-volume procurement support to a large customer base of laboratory staff, both Leidos Biomed and CCR (gov’t), using blanket orders, purchase requisitions, credit card, and online warehouse system Data entry into appropriate financial system component (CostPoint, Cor360), status checks on orders, maintenance of orders log, reconciliation of credit card transactions, maintenance of electronic filing systems Providing logistical support for the facilitation of travel packages (both pre-travel and post travel) for Leidos Biomed employees, as well as the coordination of seminar speakers and subsequent reimbursements Composing and answering emails/correspondence Communicating with all levels of personnel, both verbally and in writing, to gather and clearly convey information

  9. Interchangeable end effector tools utilized on the protoflight manipulator arm

    NASA Technical Reports Server (NTRS)

    1987-01-01

    A subset of teleoperator and effector tools was designed, fabricated, delivered and successfully demonstrated on the Marshall Space Flight Center (MSFC) protoflight manipulator arm (PFMA). The tools delivered included a rotary power tool with interchangeable collets and two fluid coupling mate/demate tools; one for a Fairchild coupling and the other for a Purolator coupling. An electrical interface connector was also provided for the rotary power tool. A tool set, from which the subset was selected, for performing on-orbit satellite maintenance was identified and conceptionally designed. Maintenance requirements were synthesized, evaluated and prioritized to develop design requirements for a set of end effector tools representative of those needed to provide on-orbit maintenance of satellites to be flown in the 1986 to 2000 timeframe.

  10. Pavement maintenance optimization model using Markov Decision Processes

    NASA Astrophysics Data System (ADS)

    Mandiartha, P.; Duffield, C. F.; Razelan, I. S. b. M.; Ismail, A. b. H.

    2017-09-01

    This paper presents an optimization model for selection of pavement maintenance intervention using a theory of Markov Decision Processes (MDP). There are some particular characteristics of the MDP developed in this paper which distinguish it from other similar studies or optimization models intended for pavement maintenance policy development. These unique characteristics include a direct inclusion of constraints into the formulation of MDP, the use of an average cost method of MDP, and the policy development process based on the dual linear programming solution. The limited information or discussions that are available on these matters in terms of stochastic based optimization model in road network management motivates this study. This paper uses a data set acquired from road authorities of state of Victoria, Australia, to test the model and recommends steps in the computation of MDP based stochastic optimization model, leading to the development of optimum pavement maintenance policy.

  11. Value of information of repair times for offshore wind farm maintenance planning

    NASA Astrophysics Data System (ADS)

    Seyr, Helene; Muskulus, Michael

    2016-09-01

    A large contribution to the total cost of energy in offshore wind farms is due to maintenance costs. In recent years research has focused therefore on lowering the maintenance costs using different approaches. Decision support models for scheduling the maintenance exist already, dealing with different factors influencing the scheduling. Our contribution deals with the uncertainty in the repair times. Given the mean repair times for different turbine components we make some assumptions regarding the underlying repair time distribution. We compare the results of a decision support model for the mean times to repair and those repair time distributions. Additionally, distributions with the same mean but different variances are compared under the same conditions. The value of lowering the uncertainty in the repair time is calculated and we find that using distributions significantly decreases the availability, when scheduling maintenance for multiple turbines in a wind park. Having detailed information about the repair time distribution may influence the results of maintenance modeling and might help identify cost factors.

  12. Mars 2024/2026 Pathfinder Mission: Mars Architectures, Systems, and Technologies for Exploration and Resources Project

    NASA Technical Reports Server (NTRS)

    Zeitlin, Nancy; Mueller, Robert; Muscatello, Anthony

    2015-01-01

    Integrate In Situ Resource Utilization (ISRU) sub-systems and examine advanced capabilities and technologies to verify Mars 2024 Forward architecture precursor pathfinder options: Integrated spacecraft/surface infrastructure fluid architecture: propulsion, power, life support center dot Power system feed and propellant scavenging from propulsion system center dot High quality oxygen for life support and EVA Fluid/cryogenic zero-loss transfer and long-term storage center dot Rapid depot-to-rover/spacecraft center dot Slow ISRU plant-to-ascent vehicle Integration of ISRU consumable production center dot Oxygen only from Mars atmosphere carbon dioxide center dot Oxygen, fuel, water, from extraterrestrial soil/regolith Test bed to evaluate long duration life, operations, maintenance on hardware, sensors, and autonomy

  13. Electrical Ground Support Equipment Fabrication, Specification for

    NASA Technical Reports Server (NTRS)

    Denson, Erik C.

    2014-01-01

    This document specifies parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment (GSE) at the Kennedy Space Center (KSC).

  14. Development of the transfer tank longitudinal sealer.

    DOT National Transportation Integrated Search

    2006-10-01

    The Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center has designed and built the next generation of Longitudinal Crack Sealing Machines (LCSM). At the time of this development, Caltrans had the second generation LCSM de...

  15. Experimental maintenance painting on various bridge projects (KH 31)

    DOT National Transportation Integrated Search

    2002-09-01

    The Kentucky Transportation Center (KTC) at the University of Kentucky conducted a research study with the Kentucky Transportation Cabinet (KYTC) to monitor various experimental bridge painting projects. The research study Kentucky Highways Investiga...

  16. An intelligent healthcare management system: a new approach in work-order prioritization for medical equipment maintenance requests.

    PubMed

    Hamdi, Naser; Oweis, Rami; Abu Zraiq, Hamzeh; Abu Sammour, Denis

    2012-04-01

    The effective maintenance management of medical technology influences the quality of care delivered and the profitability of healthcare facilities. Medical equipment maintenance in Jordan lacks an objective prioritization system; consequently, the system is not sensitive to the impact of equipment downtime on patient morbidity and mortality. The current work presents a novel software system (EQUIMEDCOMP) that is designed to achieve valuable improvements in the maintenance management of medical technology. This work-order prioritization model sorts medical maintenance requests by calculating a priority index for each request. Model performance was assessed by utilizing maintenance requests from several Jordanian hospitals. The system proved highly efficient in minimizing equipment downtime based on healthcare delivery capacity, and, consequently, patient outcome. Additionally, a preventive maintenance optimization module and an equipment quality control system are incorporated. The system is, therefore, expected to improve the reliability of medical equipment and significantly improve safety and cost-efficiency.

  17. Developing mobile- and BIM-based integrated visual facility maintenance management system.

    PubMed

    Lin, Yu-Cheng; Su, Yu-Chih

    2013-01-01

    Facility maintenance management (FMM) has become an important topic for research on the operation phase of the construction life cycle. Managing FMM effectively is extremely difficult owing to various factors and environments. One of the difficulties is the performance of 2D graphics when depicting maintenance service. Building information modeling (BIM) uses precise geometry and relevant data to support the maintenance service of facilities depicted in 3D object-oriented CAD. This paper proposes a new and practical methodology with application to FMM using BIM technology. Using BIM technology, this study proposes a BIM-based facility maintenance management (BIMFMM) system for maintenance staff in the operation and maintenance phase. The BIMFMM system is then applied in selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FMM practice. Using the BIMFMM system, maintenance staff can access and review 3D BIM models for updating related maintenance records in a digital format. Moreover, this study presents a generic system architecture and its implementation. The combined results demonstrate that a BIMFMM-like system can be an effective visual FMM tool.

  18. Behavioral and quality-of-life outcomes in different service models for methadone maintenance treatment in Vietnam.

    PubMed

    Tran, Bach Xuan; Nguyen, Long Hoang; Nong, Vuong Minh; Nguyen, Cuong Tat; Phan, Huong Thu Thi; Latkin, Carl A

    2016-02-02

    Integrating HIV/AIDS and methadone maintenance treatment (MMT) services with existing health care delivery system is critical in sustaining efforts to fight HIV/AIDS in large injection-driven epidemics. However, efficiency of different integrative service models is unknown. This study assessed behavioral and health-related quality-of-life (HRQOL) outcomes of MMT in four service delivery models and explored factors associated with these outcomes of interest. A cross-sectional survey was conducted in two HIV epicenters in Vietnam: Hanoi and Nam Dinh Province. All patients in five selected MMT clinics were invited to participate, and 1016 were interviewed (80-90% response rate). Respondents had a mean age of 35.8, taken MMT for average 16.5 months and 3.3% on MMT for 36-60 months. The MMT integrated with rural district health center (DHC) has the highest prevalence of concurrent drug use (11.3%). The percentage of condom use (last sexual intercourse) with primary and casual partners was lowest in the MMT at urban DHCs. Patients at the rural DHC reported very high proportions of pain/discomfort (37.8%), anxiety/depression (43.1%), and mobility (13.3%). In regression models, poorer HRQOL outcomes were found in MMT models in the rural areas or without general health care, and among those patients who were HIV positive, reported concurrent drug use, and had higher numbers of previous drug rehabilitation episodes. Mobility and anxiety/depression are factors that increased the likelihood of concurrent drug use among MMT patients. Outcomes of MMT were diverse across different integrative service models. Policies on rapid expansion of the MMT program in Vietnam should also emphasize on the integration with comprehensive health care services including psychological supports for patients.

  19. [The specialty clinical centers within the structure of the regional multi-specialty hospital].

    PubMed

    Fadeev, M G

    2008-01-01

    The analysis of the functioning of the regional referral clinical center of hand surgery, the eye injury center, the pediatric burns center and the neurosurgical center situated on the basis of large multi-field hospitals of the City of Ekaterinburg is presented. Such common conditions of their activity as experienced manpower availability and medical Academy chairs maintenance are revealed. The special referral clinical centers organized prior to the perstroyka and reformation, continue to function successfully providing high-tech medical care to the patients of the megapolis and to the inhabitants of the Sverdlovskaya Oblast. The effectiveness and perspectiveness of further functioning of the special referral clinical centers embedded into the structure of the municipal multi-field hospitals in the conditions of health reforms is demonstrated.

  20. Two fuzzy possibilistic bi-objective zero-one programming models for outsourcing the equipment maintenance problem

    NASA Astrophysics Data System (ADS)

    Vahdani, Behnam; Jolai, Fariborz; Tavakkoli-Moghaddam, Reza; Meysam Mousavi, S.

    2012-07-01

    Maintenance outsourcing can be regarded as a strategic weapon to increase productivity and customer satisfaction in many companies, and this critical activity can be performed in a more efficient and effective way. This article presents two novel fuzzy possibilistic bi-objective zero-one programming (FPBOZOP) models for outsourcing of the equipment maintenance. In these models, cost parameters, including outsourcing cost, risk cost, time operations for performing the equipment maintenance and reliability level, as well as other influential parameters are considered through the outsourcing process. Moreover, the presented models can measure the capability of the company in doing different activities, unlike previous studies, in order to see the possibility of maintenance in-house, and can lead to make a best decision on the basis of the models' results. Both models are developed under uncertainty, which bring top managers the possibility of assigning more than one equipment or project to the supplier so that the profit is maximized, and the cost is minimized by considering bi-objectives concurrently. Then, a new fuzzy mathematical programming based possibilistic approach is introduced as a solution methodology from the recent literature to solve the proposed bi-objective zero-one programming (BOZOP) models and to reach a preferred compromise solution. Furthermore, a real-case study is utilized to demonstrate and to validate the effectiveness of the presented models. The computational results revealed that the models can be implemented in variety of problems in the domain of the equipment maintenance outsourcing and project outsourcing either from theory or application perspectives.

  1. A new multi-objective optimization model for preventive maintenance and replacement scheduling of multi-component systems

    NASA Astrophysics Data System (ADS)

    Moghaddam, Kamran S.; Usher, John S.

    2011-07-01

    In this article, a new multi-objective optimization model is developed to determine the optimal preventive maintenance and replacement schedules in a repairable and maintainable multi-component system. In this model, the planning horizon is divided into discrete and equally-sized periods in which three possible actions must be planned for each component, namely maintenance, replacement, or do nothing. The objective is to determine a plan of actions for each component in the system while minimizing the total cost and maximizing overall system reliability simultaneously over the planning horizon. Because of the complexity, combinatorial and highly nonlinear structure of the mathematical model, two metaheuristic solution methods, generational genetic algorithm, and a simulated annealing are applied to tackle the problem. The Pareto optimal solutions that provide good tradeoffs between the total cost and the overall reliability of the system can be obtained by the solution approach. Such a modeling approach should be useful for maintenance planners and engineers tasked with the problem of developing recommended maintenance plans for complex systems of components.

  2. Air Conditioning Overflow Sensor

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Technology Transfer Office at Stennis Space Center helped a local inventor develop a prototype of an attachment for central air conditioners and heat pumps that helps monitor water levels to prevent condensation overflow. The sensor will indicate a need for drain line maintenance and prevent possible damage caused by drain pan water spillover. An engineer in the Stennis Space Center prototype Development Laboratory used SSC sensor technology in the development of the sensor.

  3. The less decade.

    PubMed

    Jones, D

    1991-01-01

    Although outsourcing is a relatively new buzzword, it actually amounts to contract management, a solution hospitals have used for years to manage operations areas such as dietary, housekeeping and maintenance. Many hospitals have found outsourcing a cost-effective way to meet their information system needs. Northeast Georgia Medical Center in Gainesville, Ga. is one example. Ten HealthQuest employees, including programmer Jerry Porter, work at NGMC under the medical center's facilities management agreement.

  4. KSC-04pd1730

    NASA Image and Video Library

    2004-09-08

    KENNEDY SPACE CENTER, FLA. - The work to clean up and secure the roof of the Processing Control Center which sustained damage from Hurricane Frances is under way. The storm's path over Florida took it through Cape Canaveral and KSC property during Labor Day weekend. Located in Launch Complex 39, the facility houses some of the staff and computers responsible for Launch Processing System (LPS) software development, launch team training, and LPS maintenance.

  5. KSC-04pd1731

    NASA Image and Video Library

    2004-09-08

    KENNEDY SPACE CENTER, FLA. - KSC employees secure the roof of the Processing Control Center which sustained damage from Hurricane Frances. The storm's path over Florida took it through Cape Canaveral and KSC property during Labor Day weekend. Located in Launch Complex 39 adjacent to the Vehicle Assembly Building (background right), the facility houses some of the staff and computers responsible for Launch Processing System (LPS) software development, launch team training, and LPS maintenance.

  6. KSC-04pd1729

    NASA Image and Video Library

    2004-09-08

    KENNEDY SPACE CENTER, FLA. - KSC employees begin the work to clean up and secure the roof of the Processing Control Center which sustained damage from Hurricane Frances. The storm's path over Florida took it through Cape Canaveral and KSC property during Labor Day weekend. Located in Launch Complex 39, the facility houses some of the staff and computers responsible for Launch Processing System (LPS) software development, launch team training, and LPS maintenance.

  7. Solar-energy heats a transportation test center--Pueblo, Colorado

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Petroleum-base, thermal energy transport fluid circulating through 583 square feet of flat-plate solar collectors accumulates majority of energy for space heating and domestic hot-water of large Test Center. Report describes operation, maintenance, and performance of system which is suitable for warehouses and similar buildings. For test period from February 1979 to January 1980, solar-heating fraction was 31 percent, solar hot-water fraction 79 percent.

  8. "I Help Them Navigate the Organization": Recognizing the Contributions of Non-Clinical Professionals to Person-Centered Approaches in Assisted Living.

    PubMed

    Shrestha, Priyanka; Abbott, Katherine M

    2018-02-01

    The current study explored the contribution of non-clinical professionals, such as housekeepers and maintenance mechanics, in promoting person-centered care (PCC) for older adults residing in assisted living. Semi-structured face-to-face interviews with staff (n = 8), concierge (n = 2), maintenance mechanics (n = 2), housekeepers (n = 3), and an administrative assistant (n = 1) from an assisted living organization were conducted. Interviews were audiorecorded, transcribed, and reviewed for accuracy. The comments from the staff were coded based on prior PCC themes (i.e., promoting decision making, meaningful living, pleasurable living, and personhood). Results show that non-clinical staff play an important role in facilitating PCC in their everyday tasks with residents. A new sub-theme was added regarding how non-clinical staff help residents in assisted living navigate the organization. Findings suggest that all tasks, no matter how routine, can be performed in a person-centered manner, contributing to the quality of life of older adults in assisted living. The authors recommend including all staff who have direct contact with residents in person-centered education and training efforts as they support the PCC goals of an organization. [Journal of Gerontological Nursing, 44(2), 9-13.]. Copyright 2018, SLACK Incorporated.

  9. Outcomes associated with intradialytic oral nutritional supplements in patients undergoing maintenance hemodialysis: a quality improvement report.

    PubMed

    Lacson, Eduardo; Wang, Weiling; Zebrowski, Barbara; Wingard, Rebecca; Hakim, Raymond M

    2012-10-01

    Insufficient clinical data exist to determine whether provision of oral nutritional supplements during dialysis can improve survival in hypoalbuminemic maintenance hemodialysis patients. Retrospective matched-cohort study. All oral nutritional supplement program-eligible in-center maintenance hemodialysis patients with albumin level ≤3.5 g/dL in quarter 4 of 2009 without oral nutritional supplements in the prior 90 days at Fresenius Medical Care, North America facilities. Monitored intradialytic oral nutritional supplements were provided to eligible maintenance hemodialysis patients upon physician order, to continue for a year or until serum albumin level was ≥4.0 g/dL. Mortality (including deaths and withdrawals), followed up until December 31, 2010. Both an intention-to-treat (ITT) and an as-treated analysis was performed using a 1:1 geographic region and propensity score-matched study population (using case-mix, laboratory test, access type, 30-day prior hospitalization, and incident patient status) comparing patients treated with intradialytic oral nutritional supplements with usual-care patients. Cox models were constructed, unadjusted and adjusted for facility standardized mortality ratio and case-mix and laboratory variables. The ITT and as-treated analyses both showed lower mortality in the oral nutritional supplement group. The conservative ITT models with 5,227 matched pairs had 40% of controls subsequently receiving oral nutritional supplements after January 1, 2010 (because many physicians delayed participation), with comparative death rates of 30.1% versus 30.4%. The corresponding as-treated (excluding crossovers) death rates for 4,289 matched pairs were 30.9% versus 37.3%. The unadjusted ITT mortality HR for oral nutritional supplement use was 0.95 (95% CI, 0.88-1.01), and the adjusted HR was 0.91 (95% CI, 0.85-0.98); the corresponding as-treated HRs were 0.71 (95% CI, 0.66-0.76) and 0.66 (95% CI, 0.61-0.71) before and after adjustment, respectively. Limited capture of oral nutritional supplement intake outside the facility and potential residual confounding from unmeasured variables, such as dietary intake. Maintenance hemodialysis patients with albumin levels ≤3.5 g/dL who received monitored intradialytic oral nutritional supplements showed survival significantly better than similar matched patient controls, with the as-treated analysis highlighting the potentially large effect of this strategy in clinical practice. Copyright © 2012 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  10. AN OPTIMAL MAINTENANCE MANAGEMENT MODEL FOR AIRPORT CONCRETE PAVEMENT

    NASA Astrophysics Data System (ADS)

    Shimomura, Taizo; Fujimori, Yuji; Kaito, Kiyoyuki; Obama, Kengo; Kobayashi, Kiyoshi

    In this paper, an optimal management model is formulated for the performance-based rehabilitation/maintenance contract for airport concrete pavement, whereby two types of life cycle cost risks, i.e., ground consolidation risk and concrete depreciation risk, are explicitly considered. The non-homogenous Markov chain model is formulated to represent the deterioration processes of concrete pavement which are conditional upon the ground consolidation processes. The optimal non-homogenous Markov decision model with multiple types of risk is presented to design the optimal rehabilitation/maintenance plans. And the methodology to revise the optimal rehabilitation/maintenance plans based upon the monitoring data by the Bayesian up-to-dating rules. The validity of the methodology presented in this paper is examined based upon the case studies carried out for the H airport.

  11. Centralized vs. decentralized child mental health services.

    PubMed

    Adams, M S

    1977-09-01

    One of the basic tenets of the Community Mental Health Center movement is that services should be provided in the consumers' community. Various centers across the country have attempted to do this in either a centralized or decentralized fashion. Historically, most health services have been provided centrally, a good example being the traditional general hospital with its centralized medical services. Over the years, some of these services have become decentralized to take the form of local health centers, health maintenance organizations, community clinics, etc, and now various large mental health centers are also being broken down into smaller community units. An example of each type of mental health facility is delineated here.

  12. A continuum of sociotechnical requirements for patient-centered problem lists.

    PubMed

    Collins, Sarah; Tsivkin, Kira; Hongsermeier, Tonya; Dubois, David; Nandigam, Hari Krishna; Rocha, Roberto A

    2013-01-01

    Specific requirements for patient-centered health information technology remain ill-defined. To create operational definitions of patient-centered problem lists, we propose a continuum of sociotechnical requirements with five stages: 1) Intradisciplinary Care Planning: Viewing and searching for problems by discipline; 2) Multi-disciplinary Care Planning: Categorizing problem states to meet discipline-specific needs; 3) Interdisciplinary Care Planning: Sharing and linking problems between disciplines; 4) Integrated and Coordinated Care Planning: Associating problems with assessments, tasks, interventions and outcomes across disciplines for coordination, knowledge development, and reporting; and 5) Patient-Centered Care Planning: Engaging patients in identification of problems and maintenance of their problem list.

  13. A Guide to the Management and Maintenance of School Grounds.

    ERIC Educational Resources Information Center

    Wood, Joan; Littlewood, Michael

    This guidebook helps schools identify their maintenance requirements, choose the best organizational model of maintenance to ensure they receive a good quality service for their money, and help teachers and administrators achieve whole school awareness and commitment to school maintenance management. Sections address evaluating a school's…

  14. The Vicious Cycle of Family Atmosphere, Interpersonal Self-concepts, and Paranoia in Schizophrenia-A Longitudinal Study.

    PubMed

    Hesse, Klaus; Kriston, Levente; Mehl, Stephanie; Wittorf, Andreas; Wiedemann, Wolfgang; Wölwer, Wolfgang; Klingberg, Stefan

    2015-11-01

    Recent cognitive models of paranoid delusions highlight the role of self-concepts in the development and maintenance of paranoia. Evidence is growing that especially interpersonal self-concepts are relevant in the genesis of paranoia. In addition, negative interpersonal life-experiences are supposed to influence the course of paranoia. As dysfunctional family atmosphere corresponds with multiple distressing dyadic experiences, it could be a risk factor for the development and maintenance of paranoia. A total of 160 patients with a diagnosis of schizophrenia were assessed twice within 12 months. Standardized questionnaires and symptom rating scales were used to measure interpersonal self-concepts, perceived family atmosphere, and paranoia. Data were analyzed using longitudinal cross-lagged structural equation models. Perceived negative family atmosphere was associated with the development of more pronounced negative interpersonal self-concepts 12 months later. Moreover, paranoia was related to negative family atmosphere after 12 months as well. As tests revealed that reversed associations were not able to explain the data, we found evidence for a vicious cycle between paranoia, family atmosphere, and interpersonal self-concepts as suggested by theoretical/cognitive model of paranoid delusions. Results suggest that broader interventions for patients and their caretakers that aim at improving family atmosphere might also be able to improve negative self-concepts and paranoia. © The Author 2015. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  15. Cracking and impact performance characteristics of plastic composite ties.

    DOT National Transportation Integrated Search

    2012-03-01

    As followup to a workshop on Engineered Composite Ties sponsored by the American Railway Engineering and Maintenance-of-Way Association and the Federal Railroad Administration, the Transportation Technology Center, Inc., in Pueblo, CO, conducted a se...

  16. Acid Reflux

    MedlinePlus

    ... term maintenance therapy is generally required. Occasionally, a health care plan seeks to limit use of proton pump ... and not the medication. Please consult with your care provider if you have any questions. ... Health Centers Colorectal Cancer Hepatitis C Inflammatory Bowel Disease ...

  17. Visual Inspection Research Project Report on Benchmark Inspections

    DOT National Transportation Integrated Search

    1996-10-01

    Word document. Recognizing the importance of visual inspection in the maintenance of the civil air fleet, the FAA tasked the Aging Aircraft Nondestructive Inspection Validation Center (AANC) at Sandia National Labs in Albuquerque, NM, to establish a ...

  18. National Biocontainment Training Center

    DTIC Science & Technology

    2012-08-01

    past reporting year, the training facility’s engineering and maintenance team welcomed trainees from the Institutio Nacional de Enfermedades Virales... Enfermedades Virales Humanas “Dr. Julio Maiztegui” and the Universidad Technologica Nacional attended the NBTC’s Biocontainment Engineering Training Program

  19. The KATE shell: An implementation of model-based control, monitor and diagnosis

    NASA Technical Reports Server (NTRS)

    Cornell, Matthew

    1987-01-01

    The conventional control and monitor software currently used by the Space Center for Space Shuttle processing has many limitations such as high maintenance costs, limited diagnostic capabilities and simulation support. These limitations have caused the development of a knowledge based (or model based) shell to generically control and monitor electro-mechanical systems. The knowledge base describes the system's structure and function and is used by a software shell to do real time constraints checking, low level control of components, diagnosis of detected faults, sensor validation, automatic generation of schematic diagrams and automatic recovery from failures. This approach is more versatile and more powerful than the conventional hard coded approach and offers many advantages over it, although, for systems which require high speed reaction times or aren't well understood, knowledge based control and monitor systems may not be appropriate.

  20. Optimization Models for Scheduling of Jobs

    PubMed Central

    Indika, S. H. Sathish; Shier, Douglas R.

    2006-01-01

    This work is motivated by a particular scheduling problem that is faced by logistics centers that perform aircraft maintenance and modification. Here we concentrate on a single facility (hangar) which is equipped with several work stations (bays). Specifically, a number of jobs have already been scheduled for processing at the facility; the starting times, durations, and work station assignments for these jobs are assumed to be known. We are interested in how best to schedule a number of new jobs that the facility will be processing in the near future. We first develop a mixed integer quadratic programming model (MIQP) for this problem. Since the exact solution of this MIQP formulation is time consuming, we develop a heuristic procedure, based on existing bin packing techniques. This heuristic is further enhanced by application of certain local optimality conditions. PMID:27274921

  1. Photogrammetry Methodology Development for Gossamer Spacecraft Structures

    NASA Technical Reports Server (NTRS)

    Pappa, Richard S.; Jones, Thomas W.; Walford, Alan; Black, Jonathan T.; Robson, Stuart; Shortis, Mark R.

    2002-01-01

    Photogrammetry--the science of calculating 3D object coordinates from images-is a flexible and robust approach for measuring the static and dynamic characteristics of future ultralightweight and inflatable space structures (a.k.a., Gossamer structures), such as large membrane reflectors, solar sails, and thin-film solar arrays. Shape and dynamic measurements are required to validate new structural modeling techniques and corresponding analytical models for these unconventional systems. This paper summarizes experiences at NASA Langley Research Center over the past three years to develop or adapt photogrammetry methods for the specific problem of measuring Gossamer space structures. Turnkey industrial photogrammetry systems were not considered a cost-effective choice for this basic research effort because of their high purchase and maintenance costs. Instead, this research uses mainly off-the-shelf digital-camera and software technologies that are affordable to most organizations and provide acceptable accuracy.

  2. A model for community-based pediatric oral heath: implementation of an infant oral care program.

    PubMed

    Ramos-Gomez, Francisco J

    2014-01-01

    The Affordable Care Act (ACA) mandates risk assessments, preventive care, and evaluations based on outcomes. ACA compliance will require easily accessible, cost-effective care models that are flexible and simple to establish. UCLA has developed an Infant Oral Care Program (IOCP) in partnership with community-based organizations that is an intervention model providing culturally competent perinatal and infant oral care for underserved, low-income, and/or minority children aged 0-5 and their caregivers. In collaboration with the Venice Family Clinic's Simms/Mann Health and Wellness Center, UCLA Pediatrics, Women, Infants, and Children (WIC), and Early Head Start and Head Start programs, the IOCP increases family-centered care access and promotes early utilization of dental services in nontraditional, primary care settings. Emphasizing disease prevention, management, and care that is sensitive to cultural, language, and oral health literacy challenges, IOCP patients achieve better oral health maintenance "in health" not in "disease modality". IOCP uses interprofessional education to promote pediatric oral health across multiple disciplines and highlights the necessity for the "age-one visit". This innovative clinical model facilitates early intervention and disease management. It sets a new standard of minimally invasive dental care that is widely available and prevention focused, with high retention rates due to strong collaborations with the community-based organizations serving these vulnerable, high-risk children.

  3. Developing RCM Strategy for Hydrogen Fuel Cells Utilizing On Line E-Condition Monitoring

    NASA Astrophysics Data System (ADS)

    Baglee, D.; Knowles, M. J.

    2012-05-01

    Fuel cell vehicles are considered to be a viable solution to problems such as carbon emissions and fuel shortages for road transport. Proton Exchange Membrane (PEM) Fuel Cells are mainly used in this purpose because they can run at low temperatures and have a simple structure. Yet high maintenance costs and the inherent dangers of maintaining equipment using hydrogen are two main issues which need to be addressed. The development of appropriate and efficient strategies is currently lacking with regard to fuel cell maintenance. A Reliability Centered Maintenance (RCM) approach offers considerable benefit to the management of fuel cell maintenance since it includes an identification and consideration of the impact of critical components. Technological developments in e-maintenance systems, radio-frequency identification (RFID) and personal digital assistants (PDAs) have proven to satisfy the increasing demand for improved reliability, efficiency and safety. RFID technology is used to store and remotely retrieve electronic maintenance data in order to provide instant access to up-to-date, accurate and detailed information. The aim is to support fuel cell maintenance decisions by developing and applying a blend of leading-edge communications and sensor technology including RFID. The purpose of this paper is to review and present the state of the art in fuel cell condition monitoring and maintenance utilizing RCM and RFID technologies. Using an RCM analysis critical components and fault modes are identified. RFID tags are used to store the critical information, possible faults and their cause and effect. The relationship between causes, faults, symptoms and long term implications of fault conditions are summarized. Finally conclusions are drawn regarding suggested maintenance strategies and the optimal structure for an integrated, cost effective condition monitoring and maintenance management system.

  4. Service contract with periodic preventive maintenance for a dump truck sold with a two-dimensional warranty

    NASA Astrophysics Data System (ADS)

    Nasrum, A.; Pasaribu, U. S.; Husniah, H.

    2016-02-01

    This paper deals with maintenance service contract for a dump truck sold with a two-dimensional warranties. We consider a situation where an agent offers two maintenance contract options and the owner of the equipment has to select the optimal option either the OEM carried out all repairs and preventive maintenance activities (option one) or the OEM only carries out failure while the costumer undertakes preventive maintenance action in-house (option two). As the number of preventive maintenance and corrective maintenance that occurs in the area of servicing contracts is very influential in determining the value of the contract, we have to determine the optimal time between preventive maintenance that can minimize the cost of repair in the contract area. Moreover, we also study the maintenance service contract considering reduction of the intensity function after preventive maintenance from both the owner and OEM point of views. In this paper, we use a Weibull intensity function to consider a product with increasing failure intensity. We use a non-cooperative game formulation to determine the optimal price structure (i.e., the contract price and repair cost) for the OEM and the owner. A numerical example derived from the model has shown that if the owner choose option one then the owner obtain a higher profit compared with the profit resulted from option two. The result agree with earlier work which uses the accelerated failure time (AFT) for the failure modeling, while here we model the failure of the dump truck without the use of the AFT.

  5. Availability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval

    NASA Astrophysics Data System (ADS)

    Kumar, Girish; Jain, Vipul; Gandhi, O. P.

    2018-03-01

    Maintenance helps to extend equipment life by improving its condition and avoiding catastrophic failures. Appropriate model or mechanism is, thus, needed to quantify system availability vis-a-vis a given maintenance strategy, which will assist in decision-making for optimal utilization of maintenance resources. This paper deals with semi-Markov process (SMP) modeling for steady state availability analysis of mechanical systems that follow condition-based maintenance (CBM) and evaluation of optimal condition monitoring interval. The developed SMP model is solved using two-stage analytical approach for steady-state availability analysis of the system. Also, CBM interval is decided for maximizing system availability using Genetic Algorithm approach. The main contribution of the paper is in the form of a predictive tool for system availability that will help in deciding the optimum CBM policy. The proposed methodology is demonstrated for a centrifugal pump.

  6. Optimal manpower allocation in aircraft line maintenance (Case in GMF AeroAsia)

    NASA Astrophysics Data System (ADS)

    Puteri, V. E.; Yuniaristanto, Hisjam, M.

    2017-11-01

    This paper presents a mathematical modeling to find the optimal manpower allocation in an aircraft line maintenance. This research focuses on assigning the number and type of manpower that allocated to each service. This study considers the licenced worker or Aircraft Maintenance Engineer Licence (AMEL) and non licenced worker or Aircraft Maintenance Technician (AMT). In this paper, we also consider the relationship of each station in terms of the possibility to transfer the manpower among them. The optimization model considers the number of manpowers needed for each service and the requirement of AMEL worker. This paper aims to determine the optimal manpower allocation using the mathematical modeling. The objective function of the model is to find the minimum employee expenses. The model was solved using the ILOG CPLEX software. The results show that the manpower allocation can meet the manpower need and the all load can be served.

  7. Technical implementation of an Internet address database with online maintenance module.

    PubMed

    Mischke, K L; Bollmann, F; Ehmer, U

    2002-01-01

    The article describes the technical implementation and management of the Internet address database of the center for ZMK (University of Münster, Dental School) Münster, which is integrated in the "ZMK-Web" website. The editorially maintained system guarantees its topicality primarily due to the electronically organized division of work with the aid of an online maintenance module programmed in JavaScript/PHP, as well as a database-related feedback function for the visitor to the website through configuration-independent direct mail windows programmed in JavaScript/PHP.

  8. Integrated analysis of engine structures

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1981-01-01

    The need for light, durable, fuel efficient, cost effective aircraft requires the development of engine structures which are flexible, made from advaced materials (including composites), resist higher temperatures, maintain tighter clearances and have lower maintenance costs. The formal quantification of any or several of these requires integrated computer programs (multilevel and/or interdisciplinary analysis programs interconnected) for engine structural analysis/design. Several integrated analysis computer prorams are under development at Lewis Reseach Center. These programs include: (1) COBSTRAN-Composite Blade Structural Analysis, (2) CODSTRAN-Composite Durability Structural Analysis, (3) CISTRAN-Composite Impact Structural Analysis, (4) STAEBL-StruTailoring of Engine Blades, and (5) ESMOSS-Engine Structures Modeling Software System. Three other related programs, developed under Lewis sponsorship, are described.

  9. COSMIC monthly progress report

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of April 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Five articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: GAP 1.0 - Groove Analysis Program, Version 1.0; SUBTRANS - Subband/Transform MATLAB Functions for Image Processing; CSDM - COLD-SAT Dynamic Model; CASRE - Computer Aided Software Reliability Estimation; and XOPPS - OEL Project Planner/Scheduler Tool. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and disseminations are also described along with a budget summary.

  10. The Child Health Care System of Serbia.

    PubMed

    Bogdanović, Radovan; Lozanović, Dragana; Pejović Milovančević, Milica; Sokal Jovanović, Ljiljana

    2016-10-01

    The health care system in Serbia is based on a network of public health institutions funded by the National Health Insurance and from the state budget. Access to public health institutions is free. Preventive and curative services are provided at the local level in primary health care centers. Over the past 5-7 years, the number of pediatricians in primary health care centers decreased because of reduced number of applicants for pediatric training, which endangers the maintenance of the traditional model of pediatric care. Secondary medical care is offered in pediatric departments of local and regional general hospitals or outpatient clinics, and in specialized hospitals for children or adults. Tertiary medical care is provided by inpatient or outpatient subspecialty services in 5 major university children's clinics. The health reforms undertaken in the recent 10 years have aimed at strengthening preventive health care and reducing the overall costs for pediatric care. Current initiatives of the Ministry of Health and national pediatric associations are aimed at reestablishing and strengthening the capacity of the primary pediatric health care model by increasing the number of physicians and developing new processes of care. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Effects of a prior stretching of the plantarflexor muscles on the capacity to control upright stance maintenance in healthy adults.

    PubMed

    Rougier, Patrice; Burdet, Cyril; Genthon, Nicolas

    2006-10-01

    To assess whether prior stretching of a muscle can induce improved postural control, 15 healthy adults stood still upright with their eyes closed before and after a series of bilateral stretches of the triceps surae muscles. The analysis focused on the center of pressure (CP) and the vertical projection of the center of gravity (CGv) trajectories and their difference (CP - CGv). The prolonged stretching induced a forward shift of the mean position of the CGv. The frequency analysis showed a constancy of the amplitudes of both basic movements whereas an increased mean power frequency was seen for the CP - CGv movements. A fractional Brownian motion modeling of the trajectories indicates shortest time intervals and lower covered distances by the CGv before a change in its control occurs along the antero-posterior axis. This reorganization is thought to be a result of improved body movement detection, which allows postural control over the longest time intervals to be triggered more rapidly.

  12. The National Resource Library for Youth with Disabilities*

    PubMed Central

    Ellis, Lynda B.M.; Blum, Robert W.; Geber, Gayle; Okinow, Nancy

    1987-01-01

    The University of Minnesota Program in Adolescent Health, in collaboration with the Society for Adolescent Medicine, has established a National Center for Youth with Disabilities. The National Center is developing an on-line National Resource Library for information related to this topic. The Library presently consists of three separate data files: journal articles, books, reports, and other bibliographic materials; model programs and projects; and a technical assistance network with referrals to experts in relevant fields. Two additional files, federal and state legislation and case law, and education and training materials, will be added in early 1988. The innovative design of this Library, including the user interface that permits it to be used by the general public, is described, and the maintenance of and modes of access to this resource are detailed. It is projected that over the first year of operation, use will grow to approximately 200 searches per month, from public and private institutions, groups and individuals, health care professionals, government officials, and parent and client groups.

  13. Pragmatic Applications of RE-AIM for Health Care Initiatives in Community and Clinical Settings

    PubMed Central

    Estabrooks, Paul E.

    2018-01-01

    The RE-AIM (Reach Effectiveness Adoption Implementation Maintenance) planning and evaluation framework has been applied broadly, but users often have difficulty in applying the model because of data collection needs across multiple domains and sources. Questions in the more common “who, what, where, how, when, and why” format may be an effective guide to ensure that individual participants, organization staff, and the perspectives of the setting are considered in planning and evaluation. Such a format can also help users in typical community and clinical settings to identify which outcomes are most valued and to focus limited measurement resources. Translations of RE-AIM that are easy to understand and apply are needed for application in real-world community and clinical settings where research and evaluation resources are limited. The purpose of this article is to provide simplified, pragmatic, user-centered and stakeholder-centered recommendations to increase the use of RE-AIM in community and clinical settings and in translational research. PMID:29300695

  14. Developing Mobile- and BIM-Based Integrated Visual Facility Maintenance Management System

    PubMed Central

    Su, Yu-Chih

    2013-01-01

    Facility maintenance management (FMM) has become an important topic for research on the operation phase of the construction life cycle. Managing FMM effectively is extremely difficult owing to various factors and environments. One of the difficulties is the performance of 2D graphics when depicting maintenance service. Building information modeling (BIM) uses precise geometry and relevant data to support the maintenance service of facilities depicted in 3D object-oriented CAD. This paper proposes a new and practical methodology with application to FMM using BIM technology. Using BIM technology, this study proposes a BIM-based facility maintenance management (BIMFMM) system for maintenance staff in the operation and maintenance phase. The BIMFMM system is then applied in selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FMM practice. Using the BIMFMM system, maintenance staff can access and review 3D BIM models for updating related maintenance records in a digital format. Moreover, this study presents a generic system architecture and its implementation. The combined results demonstrate that a BIMFMM-like system can be an effective visual FMM tool. PMID:24227995

  15. A Capacity Forecast Model for Volatile Data in Maintenance Logistics

    NASA Astrophysics Data System (ADS)

    Berkholz, Daniel

    2009-05-01

    Maintenance, repair and overhaul processes (MRO processes) are elaborate and complex. Rising demands on these after sales services require reliable production planning and control methods particularly for maintaining valuable capital goods. Downtimes lead to high costs and an inability to meet delivery due dates results in severe contract penalties. Predicting the required capacities for maintenance orders in advance is often difficult due to unknown part conditions unless the goods are actually inspected. This planning uncertainty results in extensive capital tie-up by rising stock levels within the whole MRO network. The article outlines an approach to planning capacities when maintenance data forecasting is volatile. It focuses on the development of prerequisites for a reliable capacity planning model. This enables a quick response to maintenance orders by employing appropriate measures. The information gained through the model is then systematically applied to forecast both personnel capacities and the demand for spare parts. The improved planning reliability can support MRO service providers in shortening delivery times and reducing stock levels in order to enhance the performance of their maintenance logistics.

  16. Patient Comprehension and Attitudes toward Maintenance Chemotherapy for Lung Cancer

    PubMed Central

    Gerber, David E.; Hamann, Heidi A.; Rasco, Drew W.; Woodruff, Sharon; Craddock Lee, Simon J.

    2012-01-01

    Objective Maintenance chemotherapy is a recently approved approach to the treatment of advanced non-small cell lung cancer (NSCLC). We sought to gain insight into patients’ perceptions of maintenance chemotherapy using qualitative methods. Methods We conducted thematic content analysis of focus groups at a freestanding cancer center and at an associated safety-net county hospital. Patients with advanced NSCLC who had started but not yet completed first-line platinum doublet chemotherapy were provided visual and written explanations of maintenance chemotherapy before being guided in group discussion. Results Key themes to emerge for consideration of maintenance chemotherapy included (1) survival benefits, disease control, and “buying time”; (2) the importance of “doing something”; (3) quality of life concerns; (4) the role of provider opinion/preference; and (5) the importance of logistics. Conclusions Patients undergoing first-line chemotherapy for advanced NSCLC were able to understand the concept of maintenance chemotherapy, distinguish it from traditional treatment paradigms, identify pros and cons of this approach, and convey reasons for considering it. Practice Implications Advances in oncology care that alter therapy modalities and delivery may significantly impact patient perceptions and treatment experiences. Clinical team members may wish to elicit treatment preferences of first-line patients through clinical discussions that anticipate these considerations. PMID:22632736

  17. View of building 11050 showing south side with modern addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  18. Alternative Fuels Data Center: Airport Shuttles Run on Propane

    Science.gov Websites

    " It's a cost-effective, more environmentally conscious way to go, and we feel that's how we want , citing a fuel cost savings plus lower emissions and maintenance costs. "It's a cost-effective, more

  19. 20 CFR 670.220 - Are we responsible for the protection and maintenance of center facilities?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ADMINISTRATION, DEPARTMENT OF LABOR THE JOB CORPS UNDER TITLE I OF THE WORKFORCE INVESTMENT ACT Site Selection... their condition and to identify needs such as correction of safety and health deficiencies...

  20. Continued evaluation of pothole patching equipment, materials, and processes.

    DOT National Transportation Integrated Search

    2014-06-14

    After the deaths of two Caltrans workers who were patching potholes in 2006-2007, Caltrans tasked the Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center with developing a safer and more efficient means of patching pothol...

  1. Alternative Fuels Data Center: Idle Reduction Benefits and Considerations

    Science.gov Websites

    money, protects public health and the environment, and increases U.S. energy security. Reducing idle time can also reduce engine wear and associated maintenance costs. Saving Fuel and Money A photo of an

  2. Experimental maintenance painting on various bridge projects : Kentucky Highway Investigative Task 40

    DOT National Transportation Integrated Search

    2002-02-01

    The Kentucky Transportation Center (KTC) at the University of Kentucky has performed a series of research studies for the Kentucky Transportation Cabinet (KYTC) to monitor various experimental bridge painting projects and conduct investigative work f...

  3. 4. FIRST FLOOR SOUTH WALL, WITH PIPE MANIFOLDS AND (RIGHTCENTER) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. FIRST FLOOR SOUTH WALL, WITH PIPE MANIFOLDS AND (RIGHT-CENTER) PORTABLE STEAM PUMP FOR PIPE MAINTENANCE AND CLEANING - Colgate & Company Jersey City Plant, Building No. B-3, 47-51 York Street, Jersey City, Hudson County, NJ

  4. Reusing Information Management Services for Recommended Decadal Study Missions That Facilitate Aerosol and Cloud Studies

    NASA Astrophysics Data System (ADS)

    Alcott, G.; Kempler, S.; Lynnes, C.; Leptoukh, G.; Vollmer, B.; Berrick, S.

    2008-12-01

    NASA Earth Sciences Division (ESD), and its preceding Earth science organizations, has made great investments in the development and maintenance of data management systems, as well as information technologies, for the purpose of maximizing the use and usefulness of NASA generated Earth science data. Earth science information systems, evolving with the maturation and implementation of advancing technologies, reside at NASA data centers, known as Distributed Active Archive Centers (DAACs). With information management system infrastructure in place, and system data and user services already developed and operational, only very small delta costs are required to fully support data archival, processing, and data support services required by the recommended Decadal Study missions. This presentation describes the services and capabilities of the Goddard Space Flight Center (GSFC) Earth Sciences Data and Information Services Center (GES DISC) (one of NASAs DAACs) and their potential reuse for these future missions. After 14 years working with instrument teams and the broader science community, GES DISC personnel expertise in atmospheric, water cycle, and atmospheric modeling data and information services, as well as Earth science missions, information system engineering, operations, and user services have developed a series of modular, reusable data management components currently is use in several projects. The knowledge and experience gained at the GES DISC lend themselves to providing science driven information systems in the areas of aerosols, clouds, and atmospheric chemicals to be measured by recommended Decadal Survey missions. Available reusable capabilities include data archive and distribution (Simple, Scalable, Script-based, Science [S4] Product Archive aka S4PA), data processing (S4 Processor for Measurements aka S4PM), data search (Mirador), data browse, visualization, and analysis (Giovanni), and data mining services. In addition, recent enhancements, such as Open Geospatial Consortium (OGC), Inc. interoperability implementations and data fusion prototypes, will be described. As a result of the information management systems developed by NASAs GES DISC, not only are large cost savings realized through system reuse, but maintenance costs are also minimized due to the simplicity of their implementations.

  5. Fleet equipment performance measure preventive maintenance model.

    DOT National Transportation Integrated Search

    2013-02-28

    The Texas Department of Transportation : (TxDOT) operates a large fleet of on-road and : off-road equipment. Consequently, fleet : maintenance procedures (specifically preventive : maintenance such as oil changes) represent a : significant cost to th...

  6. Elements of a Green Infrastructure Maintenance Business Plan for Milwaukee WI

    EPA Pesticide Factsheets

    This report reflects the feedback provided by MMSD and local stakeholders about different business models for conducting maintenance. The findings from this process will inform a maintenance plan for the region.

  7. Applications of Modeling and Simulation for Flight Hardware Processing at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Marshall, Jennifer L.

    2010-01-01

    The Boeing Design Visualization Group (DVG) is responsible for the creation of highly-detailed representations of both on-site facilities and flight hardware using computer-aided design (CAD) software, with a focus on the ground support equipment (GSE) used to process and prepare the hardware for space. Throughout my ten weeks at this center, I have had the opportunity to work on several projects: the modification of the Multi-Payload Processing Facility (MPPF) High Bay, weekly mapping of the Space Station Processing Facility (SSPF) floor layout, kinematics applications for the Orion Command Module (CM) hatches, and the design modification of the Ares I Upper Stage hatch for maintenance purposes. The main goal of each of these projects was to generate an authentic simulation or representation using DELMIA V5 software. This allowed for evaluation of facility layouts, support equipment placement, and greater process understanding once it was used to demonstrate future processes to customers and other partners. As such, I have had the opportunity to contribute to a skilled team working on diverse projects with a central goal of providing essential planning resources for future center operations.

  8. Evaluation of the Vehicle Out-of-Commission Standard for Air Force Vehicle Maintenance Units.

    DTIC Science & Technology

    1995-09-01

    been reduced, true performance of the unit has decreased. A study conducted by The Maryland Center for Productivity and Quality of Worklife in 1981...productivity indicators using criteria established by The Maryland Center for Productivity and Quality of Worklife study in 1981. The first conclusion was that...Results," Public Productivity and Management Review. 16: 395-402 (Summer 1993). Kaplan, Robert S. "Implementing the Balanced Scorecard at FMC

  9. Measurements to Understand the Flow Mechanisms Contributing to Tandem Rotor Outwash

    DTIC Science & Technology

    2015-05-23

    Directorate —AFDD Aviation & Missile Research, Development & Engineering Center Research, Development & Engineering Command Ames Research Center, Moffett...pilot visibility issues in brownout, dust entrain- ment into engine inlets, blade erosion, and increased air- craft maintenance. Though almost 50 years...Diameter Taylor , 1950 (Ref. 17) S, C, Ta 20 in & 45 in Fradenburgh, 1958 (Ref. 18) S 24 in Bolanovich & Marks, 1959 (Ref. 19) S 75 ft Bryan, 1960 (Ref

  10. The United States Army Logistics Center Historical Summary. (RCS-HIS-6 (R2)). 1 October 1976 to 30 September 1978.

    DTIC Science & Technology

    1980-01-10

    Experimentation (FDTE) 138 Corps Automation Requirements Baseline Identification Test (CARBIT) 138 Division Materiel Management Center (DMMC) 139 Concept...Evaluation Programs (CEP) 139 Test Design and Evaluation 140 Test and Evaluation Milestone Management System (TEMMS) 140 Manpower Analysis/Force...System (CS3) Maintenance Reporting and Management (MRM) 153 DA - Standard Port System (DASPS) 154 DA - Standard Port System - Enhancement (DASPS-E) 155 DA

  11. Maintenance action readiness assessment plan for White Oak Creek and Melton Branch Weir Stilling Pool cleanout at Oak Ridge National Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-08-01

    This Readiness Assessment Plan has been prepared to document operational readiness for the following maintenance action: (1) removal of sediment from the White Oak Creek and Melton Branch Weir Stilling Pools and (2) disposal of the radiologically contaminated sediment in another location upstream of the weirs in an area previously contaminated by stream overflow from Melton Branch in Waste Area Grouping 2 (WAG) at Oak Ridge National Laboratory. This project is being performed as a maintenance action rather than an action under the Comprehensive Environmental Response, Compensation, and Liability Act because the risk to human health and environment is wellmore » below the US Environmental Protection Agency`s level of concern. The decision to proceed as a maintenance action was documented by an interim action proposed plan, which is included in the administrative record. The administrative record is available for review at the US Department of Energy Information Resource Center, 105 Broadway Avenue, Oak Ridge, Tennessee 37830.« less

  12. The Vaccine Safety Datalink: immunization research in health maintenance organizations in the USA.

    PubMed Central

    Chen, R. T.; DeStefano, F.; Davis, R. L.; Jackson, L. A.; Thompson, R. S.; Mullooly, J. P.; Black, S. B.; Shinefield, H. R.; Vadheim, C. M.; Ward, J. I.; Marcy, S. M.

    2000-01-01

    The Vaccine Safety Datalink is a collaborative project involving the National Immunization Program of the Centers for Disease Control and Prevention and several large health maintenance organizations in the USA. The project began in 1990 with the primary purpose of rigorously evaluating concerns about the safety of vaccines. Computerized data on vaccination, medical outcome (e.g. outpatient visits, emergency room visits, hospitalizations, and deaths) and covariates (e.g. birth certificates, census data) are prospectively collected and linked under joint protocol at multiple health maintenance organizations for analysis. Approximately 6 million persons (2% of the population of the USA) are now members of health maintenance organizations participating in the Vaccine Safety Datalink, which has proved to be a valuable resource providing important information on a number of vaccine safety issues. The databases and infrastructure created for the Vaccine Safety Datalink have also provided opportunities to address vaccination coverage, cost-effectiveness and other matters connected with immunization as well as matters outside this field. PMID:10743283

  13. Augmented reality application utility for aviation maintenance work instruction

    NASA Astrophysics Data System (ADS)

    Pourcho, John Bryan

    Current aviation maintenance work instructions do not display information effectively enough to prevent costly errors and safety concerns. Aircraft are complex assemblies of highly interrelated components that confound troubleshooting and can make the maintenance procedure difficult (Drury & Gramopadhye, 2001). The sophisticated nature of aircraft maintenance necessitates a revolutionized training intervention for aviation maintenance technicians (United States General Accounting Office, 2003). Quite simply, the paper based job task cards fall short of offering rapid access to technical data and the system or component visualization necessary for working on complex integrated aircraft systems. Possible solutions to this problem include upgraded standards for paper based task cards and the use of integrated 3D product definition used on various mobile platforms (Ropp, Thomas, Lee, Broyles, Lewin, Andreychek, & Nicol, 2013). Previous studies have shown that incorporation of 3D graphics in work instructions allow the user to more efficiently and accurately interpret maintenance information (Jackson & Batstone, 2008). For aircraft maintenance workers, the use of mobile 3D model-based task cards could make current paper task card standards obsolete with their ability to deliver relevant, synchronized information to and from the hangar. Unlike previous versions of 3D model-based definition task cards and paper task cards, which are currently used in the maintenance industry, 3D model based definition task cards have the potential to be more mobile and accessible. Utilizing augmented reality applications on mobile devices to seamlessly deliver 3D product definition on mobile devices could increase the efficiency, accuracy, and reduce the mental workload for technicians when performing maintenance tasks (Macchiarella, 2004). This proposal will serve as a literary review of the aviation maintenance industry, the spatial ability of maintenance technicians, and benefits of modern digital hardware to educate, point out gaps in research, and observe possible foundations on which to build the future of aviation maintenance job task cards leading to a the methodology of the proposed study.

  14. Value centric approaches to the design, operations and maintenance of wind turbines

    NASA Astrophysics Data System (ADS)

    Khadabadi, Madhur Aravind

    Wind turbine maintenance is emerging as an unexpectedly high component of turbine operating cost, and there is an increasing interest in managing this cost. This thesis presents an alternative view of maintenance as a value-driver, and develops an optimization algorithm to evaluate the value delivered by different maintenance techniques. I view maintenance as an operation that moves the turbine to an improved state in which it can generate more power and, thus, earn more revenue. To implement this approach, I model the stochastic deterioration of the turbine in two dimensions: the deterioration rate, and the extent of deterioration, and then use maintenance to improve the state of the turbine. The value of the turbine is the difference between the revenue from to the power generation and the costs incurred in operation and maintenance. With a focus on blade deterioration, I evaluate the value delivered by implementing two different maintenance schemes, predictive maintenance and scheduled maintenance. An example of predictive maintenance technique is the use of Condition Monitoring Systems to precisely detect deterioration. I model Condition Monitoring System (CMS) of different degrees of fidelity, where a higher fidelity CMS would allow the blade state to be determined with a higher precision. The same model is then applied for the scheduled maintenance technique. The improved state information obtained from these techniques is then used to derive an optimal maintenance strategy. The difference between the value of the turbine with and without the inspection type can be interpreted as the value of the inspection. The results indicate that a higher fidelity (and more expensive) inspection method does not necessarily yield the highest value, and, that there is an optimal level of fidelity that results in maximum value. The results also aim to inform the operator of the impact of regional parameters such as wind speed, variance and maintenance costs to the optimal maintenance strategy. The contributions of this work are twofold. First, I present a practical approach to wind turbine valuation that takes operating and market conditions into account. This work should therefore be useful to wind farm operators, investors and decision makers. Second, I show how the value of a maintenance scheme can be explicitly assessed for different conditions.

  15. Interpretive Structural Model of Key Performance Indicators for Sustainable Maintenance Evaluatian in Rubber Industry

    NASA Astrophysics Data System (ADS)

    Amrina, E.; Yulianto, A.

    2018-03-01

    Sustainable maintenance is a new challenge for manufacturing companies to realize sustainable development. In this paper, an interpretive structural model is developed to evaluate sustainable maintenance in the rubber industry. The initial key performance indicators (KPIs) is identified and derived from literature and then validated by academic and industry experts. As a result, three factors of economic, social, and environmental dividing into a total of thirteen indicators are proposed as the KPIs for sustainable maintenance evaluation in rubber industry. Interpretive structural modeling (ISM) methodology is applied to develop a network structure model of the KPIs consisting of three levels. The results show the economic factor is regarded as the basic factor, the social factor as the intermediate factor, while the environmental factor indicated to be the leading factor. Two indicators of social factor i.e. labor relationship, and training and education have both high driver and dependence power, thus categorized as the unstable indicators which need further attention. All the indicators of environmental factor and one indicator of social factor are indicated as the most influencing indicator. The interpretive structural model hoped can aid the rubber companies in evaluating sustainable maintenance performance.

  16. Development of a Knowledge-Based System Approach for Decision Making in Construction Projects

    DTIC Science & Technology

    1992-05-01

    a generic model for an administrative facility and medical facility with predefined fixed building systems based on Air Force criteria and past...MAINTENANCE HANGAR (MEDIUM BAY) CORROSION CONTROL HANGAR (HIGH BAY) FUEL SYSTEM MAINTENANCE HANGAR (MEDIUM BAY) MEDICAL MODEL 82 Table 5-1--continued...BUILDING SUPPORT MEDICAL LOGISTICS MEDICAL TOTAL 85 Table 5-2--continued MISSILE ASSEMBLY AND MAINTENANCE BUILDING TOTAL MISSILE LOADING AND UNLOADING

  17. Getting maintenance of certification to work: a grounded theory study of physicians' perceptions.

    PubMed

    Cook, David A; Holmboe, Eric S; Sorensen, Kristi J; Berger, Richard A; Wilkinson, John M

    2015-01-01

    Despite general support for the goals of maintenance of certification (MOC), concerns have been raised about its effectiveness, relevance, and value. To identify barriers and enabling features associated with MOC and how MOC can be changed to better accomplish its intended purposes. Grounded theory focus group study of 50 board-certified primary care and subspecialist internal medicine and family medicine physicians in an academic medical center and outlying community sites. Eleven focus groups. Constant comparative method to analyze transcripts and identify themes related to MOC perceptions and purposes and to construct a model to guide improvement. Participants identified misalignments between the espoused purposes of MOC (eg, to promote high-quality care, commitment to the profession, lifelong learning, and the science of quality improvement) and MOC as currently implemented. At present, MOC is perceived by physicians as an inefficient and logistically difficult activity for learning or assessment, often irrelevant to practice, and of little benefit to physicians, patients, or society. To resolve these misalignments, we propose a model that invites increased support from organizations, effectiveness and relevance of learning activities, value to physicians, integration with clinical practice, and coherence across MOC tasks. Physicians view MOC as an unnecessarily complex process that is misaligned with its purposes. Acknowledging and correcting these misalignments will help MOC meet physicians' needs and improve patient care.

  18. User's Guide for a Computerized Track Maintenance Simulation Cost Methodology

    DOT National Transportation Integrated Search

    1982-02-01

    This User's Guide describes the simulation cost modeling technique developed for costing of maintenance operations of track and its component structures. The procedure discussed provides for separate maintenance cost entries to be associated with def...

  19. Human habitation field study of the Habitat Demonstration Unit (HDU)

    NASA Astrophysics Data System (ADS)

    Litaker, Harry L.; Archer, Ronald D.; Szabo, Richard; Twyford, Evan S.; Conlee, Carl S.; Howard, Robert L.

    2013-10-01

    Landing and supporting a permanent outpost on a planetary surface represents humankind's capability to expand its own horizons and challenge current technology. With this in mind, habitability of these structures becomes more essential given the longer durations of the missions. The purpose of this evaluation was to obtain preliminary human-in-the-loop performance data on the Habitat Demonstration Unit (HDU) in a Pressurized Excursion Module (PEM) configuration during a 14-day simulated lunar exploration field trial and to apply this knowledge to further enhance the habitat's capabilities for forward designs. Human factors engineers at the NASA/Johnson Space Center's Habitability and Human Factors Branch recorded approximately 96 h of crew task performance with four work stations. Human factors measures used during this study included the NASA Task Load Index (TLX) and customized post questionnaires. Overall the volume for the PEM was considered acceptable by the crew; however; the habitat's individual work station volume was constrained when setting up the vehicle for operation, medical operations, and suit maintenance while general maintenance, logistical resupply, and geo science was considered acceptable. Crew workload for each station indicated resupply as being the lowest rated, with medical operations, general maintenance, and geo science tasks as being light, while suit maintenance was considered moderate and general vehicle setup being rated the highest. Stowage was an issue around the habitat with the Space Exploration Vehicle (SEV) resupply stowage located in the center of the habitat as interfering with some work station volumes and activities. Ergonomics of the geo science station was considered a major issue, especially with the overhead touch screens.

  20. Characterization of a Regenerable Impactor Filter for Spacecraft Cabin Applications

    NASA Technical Reports Server (NTRS)

    Agui, Juan H.; Vijayakumar, R.

    2015-01-01

    Regenerable filters will play an important role in human exploration beyond low-Earth orbit. Life Support Systems aboard crewed spacecrafts will have to operate reliably and with little maintenance over periods of more than a year, even multiple years. Air filters are a key component of spacecraft life support systems, but they often require frequent routine maintenance. Bacterial filters aboard the International Space Station require almost weekly cleaning of the pre-filter screen to remove large lint debris captured in the microgravity environment. The source of the airborne matter which is collected on the filter screen is typically from clothing fibers, biological matter (hair, skin, nails, etc.) and material wear. Clearly a need for low maintenance filters requiring little to no crew intervention will be vital to the success of the mission. An impactor filter is being developed and tested to address this need. This filter captures large particle matter through inertial separation and impaction methods on collection surfaces, which can be automatically cleaned after they become heavily loaded. The impactor filter can serve as a pre-filter to augment the life of higher efficiency filters that capture fine and ultrafine particles. A prototype of the filter is being tested at the Particulate Filtration Laboratory at NASA Glenn Research Center to determine performance characteristics, including particle cut size and overall efficiency. Model results are presented for the flow characteristics near the orifice plate through which the particle-laden flow is accelerated as well as around the collection bands.

  1. Multi-objective decision-making model based on CBM for an aircraft fleet

    NASA Astrophysics Data System (ADS)

    Luo, Bin; Lin, Lin

    2018-04-01

    Modern production management patterns, in which multi-unit (e.g., a fleet of aircrafts) are managed in a holistic manner, have brought new challenges for multi-unit maintenance decision making. To schedule a good maintenance plan, not only does the individual machine maintenance have to be considered, but also the maintenance of the other individuals have to be taken into account. Since most condition-based maintenance researches for aircraft focused on solely reducing maintenance cost or maximizing the availability of single aircraft, as well as considering that seldom researches concentrated on both the two objectives: minimizing cost and maximizing the availability of a fleet (total number of available aircraft in fleet), a multi-objective decision-making model based on condition-based maintenance concentrated both on the above two objectives is established. Furthermore, in consideration of the decision maker may prefer providing the final optimal result in the form of discrete intervals instead of a set of points (non-dominated solutions) in real decision-making problem, a novel multi-objective optimization method based on support vector regression is proposed to solve the above multi-objective decision-making model. Finally, a case study regarding a fleet is conducted, with the results proving that the approach efficiently generates outcomes that meet the schedule requirements.

  2. Simulated life cycles of persistent anticyclonic anomalies over the North Pacific: Role of synoptic-scale eddies

    NASA Technical Reports Server (NTRS)

    Higgins, R. W.; Schubert, S. D.

    1994-01-01

    This study examines the role of synoptic-scale eddies during the development of persistent anticyclonic height anomalies over the central North Pacific in a general circulation model under perpetual January conditions. The General Circulation Model (GCM) replicates the basic characteristics of the evolution of the anomaly patterns found in observations. The life cycle is characterized by the rapid establishment of the major anomaly center and considerably longer maintenance and decay phases, which include the development of downstream anomaly centers. The simulation also shows a realistic evolution of synoptic-scale activity beginning with enhanced activity off the east coast of Asia prior to onset, followed by a northward shift of the Pacific storm track, which lasts throughout the maintenance phase. The initial enhancement of synoptic-scale eddy activity is associated with a large-scale cyclonic anomaly that developes over Siberia several days prior to the onset of the main anticyclonic anomaly over the central North Pacific. The observations, however, show considerable interdecadel variability in the details of the composite onset behavior; it is unclear whether this variability is real or whether it reflects differences in the data assimilation systems. The role of the time mean flow and synoptic-scale eddies in the development of the persistent Pacific anomalies is studied within the context of a kinetic energy budget in which the flow is decomposed into the time-mean, low-frequency (timescales longer than 10 days), and synoptic (timescales less than 6 days) components. The budget, which is carried out for the simulation at 500 mb, shows that the initial growth of the persistent anticyclonic anomalies is associated with barotropic conversions of energy, with approximately equal contributions coming from the mean flow and the synoptic-scale eddies. After onset the barotropic conversion from the mean flow dominates, whereas the decay phase is associated with baroclinic processes within the low-frequency flow.

  3. Rules of the Road for Transporting Children--Guidelines for Developing a Motor Vehicle Safety Program.

    ERIC Educational Resources Information Center

    Hooker, Bruce; Gearhart, Kentin

    1999-01-01

    Discusses safety issues for child care centers that provide transportation for children. Notes the importance of vehicle usage and control, driver qualifications, vehicle maintenance, child securement, accident procedures, and driver education and training. (JPB)

  4. 42 CFR 417.911 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Definitions. 417.911 Section 417.911 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE...

  5. 42 CFR 417.911 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Definitions. 417.911 Section 417.911 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE...

  6. 42 CFR 417.911 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Definitions. 417.911 Section 417.911 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS...

  7. 42 CFR 417.911 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Definitions. 417.911 Section 417.911 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS...

  8. 42 CFR 417.911 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Definitions. 417.911 Section 417.911 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE...

  9. Maintenance paintings of various bridge projects during 2001-2002 : Kentucky Highway Investigative Task 42.

    DOT National Transportation Integrated Search

    2003-03-01

    The Kentucky Transportation Center (KTC) at the University of Kentucky has performed a series of research studies for the Kentucky Transportation Cabinet (KYTC) to monitor various experimental bridge painting projects and conduct investigative work f...

  10. Permeable pavement demonstration at the Edison Environmental Center

    EPA Science Inventory

    There are few studies of full-scale, outdoor, replicated, functioning pervious pavement systems. More studies of pervious pavement operating in its intended use (parking lot, roadway, etc.) during a range of climatic events, daily usage conditions, and maintenance regimes are nec...

  11. 42 CFR 480.102 - Statutory bases for acquisition and maintenance of information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... information. 480.102 Section 480.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality...

  12. 42 CFR 480.102 - Statutory bases for acquisition and maintenance of information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... information. 480.102 Section 480.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality...

  13. 42 CFR 480.102 - Statutory bases for acquisition and maintenance of information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... information. 480.102 Section 480.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality...

  14. Review of health maintenance program findings, 1960-1974

    NASA Technical Reports Server (NTRS)

    White, E. S.

    1975-01-01

    A preliminary analysis of the employee's examination records of the automated medical data base at the NASA Wallops Flight Center, Va., with an emphasis on the primary mission of the program-the early detection and control of cardiovascular disease, is presented.

  15. Alternative Fuels Data Center: Baltimore-Based Bakery Launches Fleet of

    Science.gov Websites

    propane would reduce maintenance costs and save us money on fuel compared to diesel and gasoline," Bakery knew that wasting time, money, and fuel was not in the company's best interest. That's why their

  16. Managing Inventory At A Transitional Facility

    NASA Technical Reports Server (NTRS)

    Hutchins, Henry A.

    1993-01-01

    Kennedy Inventory Management System, KIMS, geared to needs of facility in transition from research and development to manufacturing. Operated jointly by several contractors at Kennedy Space Center, KIMS designed to reduce cost and increase efficiency of fabrication and maintenance of spaceflight hardware.

  17. Wyoming Department of Transportation (WYDOT) road condition reporting application for weather responsive traffic management.

    DOT National Transportation Integrated Search

    2016-01-01

    FHWAs Road Weather Management Program partnered with WYDOT to develop a new software application to improve the way maintenance personnel report road and weather conditions to their statewide Transportation Management Center (TMC), recommend varia...

  18. Permeable Pavement Monitoring at the Edison Environmental Center Demonstration Site

    EPA Science Inventory

    The presentation covers the following monitoring objectives at the demonstration site at Edison, NJ: Hydrologic performance, water quality performance, urban heat island effects, maintenance effects and infiltration water parameters. There will be a side by side monitoring of ...

  19. Space Operations Center System Analysis: Requirements for a Space Operations Center, revision A

    NASA Technical Reports Server (NTRS)

    Woodcock, G. R.

    1982-01-01

    The system and program requirements for a space operations center as defined by systems analysis studies are presented as a guide for future study and systems definition. Topics covered include general requirements for safety, maintainability, and reliability, service and habitat modules, the health maintenance facility; logistics modules; the docking tunnel; and subsystem requirements (structures, electrical power, environmental control/life support; extravehicular activity; data management; communications and tracking; docking/berthing; flight control/propulsion; and crew support). Facilities for flight support, construction, satellite and mission servicing, and fluid storage are included as well as general purpose support equipment.

  20. Centralized vs. Decentralized Child Mental Health Services

    PubMed Central

    Adams, Milton S.

    1977-01-01

    One of the basic tenets of the Community Mental Health Center movement is that services should be provided in the consumers' community. Various centers across the country have attempted to do this in either a centralized or decentralized fashion. Historically, most health services have been provided centrally, a good example being the traditional general hospital with its centralized medical services. Over the years, some of these services have become decentralized to take the form of local health centers, health maintenance organizations, community clinics, etc, and now various large mental health centers are also being broken down into smaller community units. An example of each type of mental health facility is delineated here. PMID:904014

  1. Exploring Behavioral Markers of Long-Term Physical Activity Maintenance: A Case Study of System Identification Modeling within a Behavioral Intervention

    ERIC Educational Resources Information Center

    Hekler, Eric B.; Buman, Matthew P.; Poothakandiyil, Nikhil; Rivera, Daniel E.; Dzierzewski, Joseph M.; Aiken Morgan, Adrienne; McCrae, Christina S.; Roberts, Beverly L.; Marsiske, Michael; Giacobbi, Peter R., Jr.

    2013-01-01

    Efficacious interventions to promote long-term maintenance of physical activity are not well understood. Engineers have developed methods to create dynamical system models for modeling idiographic (i.e., within-person) relationships within systems. In behavioral research, dynamical systems modeling may assist in decomposing intervention effects…

  2. Transfer of infrared thermography predictive maintenance technologies to Soviet-designed nuclear power plants: experience at Chernobyl

    NASA Astrophysics Data System (ADS)

    Pugh, Ray; Huff, Roy

    1999-03-01

    The importance of infrared (IR) technology and analysis in today's world of predictive maintenance and reliability- centered maintenance cannot be understated. The use of infrared is especially important in facilities that are required to maintain a high degree of equipment reliability because of plant or public safety concerns. As with all maintenance tools, particularly those used in predictive maintenance approaches, training plays a key role in their effectiveness and the benefit gained from their use. This paper details an effort to transfer IR technology to Soviet- designed nuclear power plants in Russia, Ukraine, and Lithuania. Delivery of this technology and post-delivery training activities have been completed recently at the Chornobyl nuclear power plant in Ukraine. Many interesting challenges were encountered during this effort. Hardware procurement and delivery of IR technology to a sensitive country were complicated by United States regulations. Freight and shipping infrastructure and host-country customs policies complicated hardware transport. Training activities were complicated by special hardware, software and training material translation needs, limited communication opportunities, and site logistical concerns. These challenges and others encountered while supplying the Chornobyl plant with state-of-the-art IR technology are described in this paper.

  3. Performance of Water Recirculation Loop Maintenance Components for the Advanced Spacesuit Water Membrane Evaporator

    NASA Technical Reports Server (NTRS)

    Rector, Tony; Peyton, Barbara M.; Steele, John W.; Makinen, Janice; Bue, Grant C.; Campbell, Colin

    2014-01-01

    Water loop maintenance components to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop have undergone a comparative performance evaluation with a second SWME water recirculation loop with no water quality maintenance. Results show the benefits of periodic water maintenance. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the evaluation of water recirculation maintenance components was to further enhance this advantage through the leveraging of fluid loop management lessons learned from the International Space Station (ISS). A bed design that was developed for a UTAS military application, and considered for a potential ISS application with the Urine Processor Assembly, provided a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance cycle included the use of a biocide delivery component developed for ISS to introduce a biocide in a microgravity compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  4. Performance of Water Recirculation Loop Maintenance Components for the Advanced Spacesuit Water Membrane Evaporator

    NASA Technical Reports Server (NTRS)

    Rector, Tony; Peyton, Barbara M.; Steele, John W.; Makinen, Janice; Bue, Grant C.; Campbell, Colin

    2014-01-01

    Water loop maintenance components to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop have undergone a comparative performance evaluation with a recirculating control loop which had no water quality maintenance. Results show that periodic water maintenance can improve performance of the SWME. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage of this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing sublimator technology. The driver for the evaluation of water recirculation maintenance components was to enhance the robustness of the SWME through the leveraging of fluid loop management lessons learned from the International Space Station (ISS). A patented bed design that was developed for a United Technologies Aerospace System military application provided a low pressure drop means for water maintenance in the SWME recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance cycle included the use of a biocide delivery component developed for the ISS to introduce a biocide in a microgravity compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  5. Managing aging in nuclear power plants: Insights from NRC maintenance team inspection reports

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fresco, A.; Subudhi, M.; Gunther, W.

    1993-12-01

    A plant`s maintenance program is the principal vehicle through which age-related degradation is managed. From 1988 to 1991, the NRC evaluated the maintenance program of every nuclear power plant in the United States. Forty-four out of a total of 67 of the reports issued on these in-depth team inspections were reviewed for insights into the strengths and weaknesses of the programs as related to the need to understand and manage the effects of aging on nuclear plant systems, structures, and components. Relevant information was extracted from these inspection reports and sorted into several categories, including Specific Aging Insights, Preventive Maintenance,more » Predictive Maintenance and Condition Monitoring, Post Maintenance Testing, Failure Trending, Root Cause Analysis and Usage of Probabilistic Risk Assessment in the Maintenance Process. Specific examples of inspection and monitoring techniques successfully used by utilities to detect degradation due to aging have been identified. The information also was sorted according to systems and components, including: Auxiliary Feedwater, Main Feedwater, High Pressure Injection for both BWRs and PWRs, Service Water, Instrument Air, and Emergency Diesel Generator Air Start Systems, and Emergency Diesel Generators Air Start Systems, emergency diesel generators, electrical components such as switchgear, breakers, relays, and motor control centers, motor operated valves and check valves. This information was compared to insights gained from the Nuclear Plant Aging Research (NPAR) Program. Attributes of plant maintenance programs where the NRC inspectors felt that improvement was needed to properly address the aging issue also are discussed.« less

  6. An efficiency-decay model for Lumen maintenance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bobashev, Georgiy; Baldasaro, Nicholas G.; Mills, Karmann C.

    Proposed is a multicomponent model for the estimation of light-emitting diode (LED) lumen maintenance using test data that were acquired in accordance with the test standards of the Illumination Engineering Society of North America, i.e., LM-80-08. Lumen maintenance data acquired with this test do not always follow exponential decay, particularly data collected in the first 1000 h or under low-stress (e.g., low temperature) conditions. This deviation from true exponential behavior makes it difficult to use the full data set in models for the estimation of lumen maintenance decay coefficient. As a result, critical information that is relevant to the earlymore » life or low-stress operation of LED light sources may be missed. We present an efficiency-decay model approach, where all lumen maintenance data can be used to provide an alternative estimate of the decay rate constant. The approach considers a combined model wherein one part describes an initial “break-in” period and another part describes the decay in lumen maintenance. During the break-in period, several mechanisms within the LED can act to produce a small (typically <; 10%) increase in luminous flux. The effect of the break-in period and its longevity is more likely to be present at low-ambient temperatures and currents, where the discrepancy between a standard TM-21 approach and our proposed model is the largest. For high temperatures and currents, the difference between the estimates becomes nonsubstantial. Finally, our approach makes use of all the collected data and avoids producing unrealistic estimates of the decay coefficient.« less

  7. An efficiency-decay model for Lumen maintenance

    DOE PAGES

    Bobashev, Georgiy; Baldasaro, Nicholas G.; Mills, Karmann C.; ...

    2016-08-25

    Proposed is a multicomponent model for the estimation of light-emitting diode (LED) lumen maintenance using test data that were acquired in accordance with the test standards of the Illumination Engineering Society of North America, i.e., LM-80-08. Lumen maintenance data acquired with this test do not always follow exponential decay, particularly data collected in the first 1000 h or under low-stress (e.g., low temperature) conditions. This deviation from true exponential behavior makes it difficult to use the full data set in models for the estimation of lumen maintenance decay coefficient. As a result, critical information that is relevant to the earlymore » life or low-stress operation of LED light sources may be missed. We present an efficiency-decay model approach, where all lumen maintenance data can be used to provide an alternative estimate of the decay rate constant. The approach considers a combined model wherein one part describes an initial “break-in” period and another part describes the decay in lumen maintenance. During the break-in period, several mechanisms within the LED can act to produce a small (typically <; 10%) increase in luminous flux. The effect of the break-in period and its longevity is more likely to be present at low-ambient temperatures and currents, where the discrepancy between a standard TM-21 approach and our proposed model is the largest. For high temperatures and currents, the difference between the estimates becomes nonsubstantial. Finally, our approach makes use of all the collected data and avoids producing unrealistic estimates of the decay coefficient.« less

  8. 78 FR 7672 - Approval and Promulgation of Implementation Plans; Texas; Beaumont/Port Arthur Ozone Maintenance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    .... SUMMARY: EPA is approving a revision to the Beaumont/Port Arthur (BPA) 1997 8-hour ozone maintenance air... emissions model. The BPA 1997 8-hour ozone maintenance area consists of Hardin, Jefferson, and Orange... proposed to approve a revision to the BPA 1997 8-hour ozone maintenance air quality SIP by replacing the...

  9. MDOT Pavement Management System : Prediction Models and Feedback System

    DOT National Transportation Integrated Search

    2000-10-01

    As a primary component of a Pavement Management System (PMS), prediction models are crucial for one or more of the following analyses: : maintenance planning, budgeting, life-cycle analysis, multi-year optimization of maintenance works program, and a...

  10. [Studies of prognostic factor and chemotherapeutic effect of epithelial ovarian cancer using Cox's proportional hazard model].

    PubMed

    Umesaki, N; Sugawa, T; Yajima, A; Satoh, S; Terashima, Y; Ochiai, K; Tomoda, Y; Kanoh, T; Noda, K; Yakushiji, M

    1993-12-01

    To make clear the prognostic factor and chemotherapeutic effect of epithelial ovarian cancer, a multiple-center study involving 22 hospitals in Japan was conducted using Cox's proportional hazard model. A total of 1,181 cases were reviewed. Clinical stage, histologic type, and residual tumor diameter were significant prognostic factors, but the degree of tissue differentiation was not. The effect of remission induction chemotherapy was assessed with or without CDDP, and a distinct prognostic difference was noted. Among the patients receiving CDDP + ADM + other chemotherapeutic agents (PA group), CDDP + other chemotherapeutic agents (PO group) and CDDP only (P group), the prognosis of the PO group was better than for the P group. The long-term prognosis improving effect of chemotherapy was assessed. Neither maintenance chemotherapy based on oral administration of pyrimidine fluoride nor immunotherapy had any long-term prognosis improving effect, while intermittent chemotherapy based on CDDP resulted in improved prognosis.

  11. Modeling-Enabled Systems Nutritional Immunology

    PubMed Central

    Verma, Meghna; Hontecillas, Raquel; Abedi, Vida; Leber, Andrew; Tubau-Juni, Nuria; Philipson, Casandra; Carbo, Adria; Bassaganya-Riera, Josep

    2016-01-01

    This review highlights the fundamental role of nutrition in the maintenance of health, the immune response, and disease prevention. Emerging global mechanistic insights in the field of nutritional immunology cannot be gained through reductionist methods alone or by analyzing a single nutrient at a time. We propose to investigate nutritional immunology as a massively interacting system of interconnected multistage and multiscale networks that encompass hidden mechanisms by which nutrition, microbiome, metabolism, genetic predisposition, and the immune system interact to delineate health and disease. The review sets an unconventional path to apply complex science methodologies to nutritional immunology research, discovery, and development through “use cases” centered around the impact of nutrition on the gut microbiome and immune responses. Our systems nutritional immunology analyses, which include modeling and informatics methodologies in combination with pre-clinical and clinical studies, have the potential to discover emerging systems-wide properties at the interface of the immune system, nutrition, microbiome, and metabolism. PMID:26909350

  12. Neural Network Control of a Magnetically Suspended Rotor System

    NASA Technical Reports Server (NTRS)

    Choi, Benjamin B.

    1998-01-01

    Magnetic bearings offer significant advantages because they do not come into contact with other parts during operation, which can reduce maintenance. Higher speeds, no friction, no lubrication, weight reduction, precise position control, and active damping make them far superior to conventional contact bearings. However, there are technical barriers that limit the application of this technology in industry. One of them is the need for a nonlinear controller that can overcome the system nonlinearity and uncertainty inherent in magnetic bearings. At the NASA Lewis Research Center, a neural network was selected as a nonlinear controller because it generates a neural model without any detailed information regarding the internal working of the magnetic bearing system. It can be used even for systems that are too complex for an accurate system model to be derived. A feed-forward architecture with a back-propagation learning algorithm was selected because of its proven performance, accuracy, and relatively easy implementation.

  13. [Disease prevention in the elderly: misconceptions in current models].

    PubMed

    Veras, Renato Peixoto

    2012-10-01

    The Brazilian population is aging significantly within a context of gradual improvement in the country's social and economic indicators. Increased longevity leads to increased use of health services, pressuring the public and social welfare health services, generating higher costs, and jeopardizing the system's sustainability. The alternative to avoid overburdening the system is to invest in policies for disease prevention, stabilization of chronic diseases, and maintenance of functional capacity. The current article aims to analyze the difficulties in implementing preventive programs and the reasons for the failure of various programs in health promotion, prevention, and management of chronic diseases in the elderly. There can be no solution to the crisis in financing and restructuring the health sector without implementing a preventive logic. Scientific research has already correctly identified the risk factors for the elderly population, but this is not enough. We must use such knowledge to promote the necessary transition from a healthcare-centered model to a preventive one.

  14. Photogrammetry Methodology Development for Gossamer Spacecraft Structures

    NASA Technical Reports Server (NTRS)

    Pappa, Richard S.; Jones, Thomas W.; Black, Jonathan T.; Walford, Alan; Robson, Stuart; Shortis, Mark R.

    2002-01-01

    Photogrammetry--the science of calculating 3D object coordinates from images--is a flexible and robust approach for measuring the static and dynamic characteristics of future ultra-lightweight and inflatable space structures (a.k.a., Gossamer structures), such as large membrane reflectors, solar sails, and thin-film solar arrays. Shape and dynamic measurements are required to validate new structural modeling techniques and corresponding analytical models for these unconventional systems. This paper summarizes experiences at NASA Langley Research Center over the past three years to develop or adapt photogrammetry methods for the specific problem of measuring Gossamer space structures. Turnkey industrial photogrammetry systems were not considered a cost-effective choice for this basic research effort because of their high purchase and maintenance costs. Instead, this research uses mainly off-the-shelf digital-camera and software technologies that are affordable to most organizations and provide acceptable accuracy.

  15. Shuttle Flight Operations Contract Generator Maintenance Facility Land Use Control Implementation Plan (LUCIP)

    NASA Technical Reports Server (NTRS)

    Applegate, Joseph L.

    2014-01-01

    This Land Use Control Implementation Plan (LUCIP) has been prepared to inform current and potential future users of the Kennedy Space Center (KSC) Shuttle Flight Operations Contract Generator Maintenance Facility (SFOC; SWMU 081; "the Site") of institutional controls that have been implemented at the Site1. Although there are no current unacceptable risks to human health or the environment associated with the SFOC, an institutional land use control (LUC) is necessary to prevent human health exposure to antimony-affected groundwater at the Site. Controls will include periodic inspection, condition certification, and agency notification.

  16. Data collection procedures for the Software Engineering Laboratory (SEL) database

    NASA Technical Reports Server (NTRS)

    Heller, Gerard; Valett, Jon; Wild, Mary

    1992-01-01

    This document is a guidebook to collecting software engineering data on software development and maintenance efforts, as practiced in the Software Engineering Laboratory (SEL). It supersedes the document entitled Data Collection Procedures for the Rehosted SEL Database, number SEL-87-008 in the SEL series, which was published in October 1987. It presents procedures to be followed on software development and maintenance projects in the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC) for collecting data in support of SEL software engineering research activities. These procedures include detailed instructions for the completion and submission of SEL data collection forms.

  17. Effects of Hypoxia on the Vasopressin Response to Hemorrhage and its Role in Maintenance of Blood Pressure.

    DTIC Science & Technology

    1992-08-30

    AD-A25 8 992 UIiII|UH1iU MIPR NO: 91MM1536 TITLE: EFFECTS OF HYPOXIA ON THE VASOPRESSIN RESPONSE TO HEMORRHAGE AND ITS ROLE IN MAINTENANCE OF BLOOD...TYPE AND DATES COVERMf 130 August 1992 Final Report (3/1/91 - 9/30/92) 𔃾. TITLE AND SUBTITLE TS FUNDING N L 4, I Effects of Hypoxia on the Vasopressin...Telephone No. (808) 433-5219 6. Agency Tripler Army Medical Center, Dept. of Clin. Invest. 7. Project Title: Effects of hypoxia on the vasopressin

  18. Maintenance Categories - A Substudy of the Maintenance Support Structure for Contingency Forces Study (ACN 21012).

    DTIC Science & Technology

    1977-06-23

    ORDNANCE AND CHEMICAL CENTEER AND SCHOOL CL.. TAA t ~ 4L . ? LtIITED STATES ARMY ORDNANCE AND CHEM4ICAL CENTER AND SCHOOLJ ABERDEEN PROVING GlRUND, MD 21005...isUNCLASSIFIED. DISTRIBUTIONTTh • maw•F • t ~ istr’ e .•only with fS Army a ii ° ! ACKNOWLEDGEMENT This studxy was initiated and sponsored by the US Army...MAC charts, and if MAC charts corrected throughI compliance with this policy were to supersede current charts. xiX ik" ""I s ,. * t .. . . •._ • , - 4

  19. The development and application of composite complexity models and a relative complexity metric in a software maintenance environment

    NASA Technical Reports Server (NTRS)

    Hops, J. M.; Sherif, J. S.

    1994-01-01

    A great deal of effort is now being devoted to the study, analysis, prediction, and minimization of software maintenance expected cost, long before software is delivered to users or customers. It has been estimated that, on the average, the effort spent on software maintenance is as costly as the effort spent on all other software costs. Software design methods should be the starting point to aid in alleviating the problems of software maintenance complexity and high costs. Two aspects of maintenance deserve attention: (1) protocols for locating and rectifying defects, and for ensuring that noe new defects are introduced in the development phase of the software process; and (2) protocols for modification, enhancement, and upgrading. This article focuses primarily on the second aspect, the development of protocols to help increase the quality and reduce the costs associated with modifications, enhancements, and upgrades of existing software. This study developed parsimonious models and a relative complexity metric for complexity measurement of software that were used to rank the modules in the system relative to one another. Some success was achieved in using the models and the relative metric to identify maintenance-prone modules.

  20. The contributions of human factors on human error in Malaysia aviation maintenance industries

    NASA Astrophysics Data System (ADS)

    Padil, H.; Said, M. N.; Azizan, A.

    2018-05-01

    Aviation maintenance is a multitasking activity in which individuals perform varied tasks under constant pressure to meet deadlines as well as challenging work conditions. These situational characteristics combined with human factors can lead to various types of human related errors. The primary objective of this research is to develop a structural relationship model that incorporates human factors, organizational factors, and their impact on human errors in aviation maintenance. Towards that end, a questionnaire was developed which was administered to Malaysian aviation maintenance professionals. Structural Equation Modelling (SEM) approach was used in this study utilizing AMOS software. Results showed that there were a significant relationship of human factors on human errors and were tested in the model. Human factors had a partial effect on organizational factors while organizational factors had a direct and positive impact on human errors. It was also revealed that organizational factors contributed to human errors when coupled with human factors construct. This study has contributed to the advancement of knowledge on human factors effecting safety and has provided guidelines for improving human factors performance relating to aviation maintenance activities and could be used as a reference for improving safety performance in the Malaysian aviation maintenance companies.

  1. Transport systems research vehicle color display system operations manual

    NASA Technical Reports Server (NTRS)

    Easley, Wesley C.; Johnson, Larry E.

    1989-01-01

    A recent upgrade of the Transport Systems Research Vehicle operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center has resulted in an all-glass panel in the research flight deck. Eight ARINC-D size CRT color displays make up the panel. A major goal of the display upgrade effort was ease of operation and maintenance of the hardware while maintaining versatility needed for flight research. Software is the key to this required versatility and will be the area demanding the most detailed technical design expertise. This document is is intended to serve as a single source of quick reference information needed for routine operation and system level maintenance. Detailed maintenance and modification of the display system will require specific design documentation and must be accomplished by individuals with specialized knowledge and experience.

  2. Remaining useful life prediction of degrading systems subjected to imperfect maintenance: Application to draught fans

    NASA Astrophysics Data System (ADS)

    Wang, Zhao-Qiang; Hu, Chang-Hua; Si, Xiao-Sheng; Zio, Enrico

    2018-02-01

    Current degradation modeling and remaining useful life prediction studies share a common assumption that the degrading systems are not maintained or maintained perfectly (i.e., to an as-good-as new state). This paper concerns the issues of how to model the degradation process and predict the remaining useful life of degrading systems subjected to imperfect maintenance activities, which can restore the health condition of a degrading system to any degradation level between as-good-as new and as-bad-as old. Toward this end, a nonlinear model driven by Wiener process is first proposed to characterize the degradation trajectory of the degrading system subjected to imperfect maintenance, where negative jumps are incorporated to quantify the influence of imperfect maintenance activities on the system's degradation. Then, the probability density function of the remaining useful life is derived analytically by a space-scale transformation, i.e., transforming the constructed degradation model with negative jumps crossing a constant threshold level to a Wiener process model crossing a random threshold level. To implement the proposed method, unknown parameters in the degradation model are estimated by the maximum likelihood estimation method. Finally, the proposed degradation modeling and remaining useful life prediction method are applied to a practical case of draught fans belonging to a kind of mechanical systems from steel mills. The results reveal that, for a degrading system subjected to imperfect maintenance, our proposed method can obtain more accurate remaining useful life predictions than those of the benchmark model in literature.

  3. Largest Generator Validation Yet at the National Wind Technology Center |

    Science.gov Websites

    are many fewer moving parts that can increase maintenance. The 5-MW dynamometer will simulate the is expected to increase by 8% from 2010 to 2020." But despite the fact that the increase in

  4. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sprik, Samuel; Kurtz, Jennifer M; Ainscough, Christopher D

    In this presentation, the National Renewable Energy Laboratory presented aggregated analysis results on the performance of existing hydrogen stations, including performance, operation, utilization, maintenance, safety, hydrogen quality, and cost. The U.S. Department of Energy funds technology validation work at NREL through its National Fuel Cell Technology Evaluation Center (NFCTEC).

  5. 15 CFR 710.1 - Definitions of terms used in the Chemical Weapons Convention Regulations (CWCR).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) Administration and other offices; (2) Repair and maintenance shops; (3) Medical center; (4) Utilities; (5... section 3(b) of the Maritime Drug Enforcement Act, as amended (section 1903(b) of Title 46 App. of the...

  6. 15 CFR 710.1 - Definitions of terms used in the Chemical Weapons Convention Regulations (CWCR).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) Administration and other offices; (2) Repair and maintenance shops; (3) Medical center; (4) Utilities; (5... section 3(b) of the Maritime Drug Enforcement Act, as amended (section 1903(b) of Title 46 App. of the...

  7. 15 CFR 710.1 - Definitions of terms used in the Chemical Weapons Convention Regulations (CWCR).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) Administration and other offices; (2) Repair and maintenance shops; (3) Medical center; (4) Utilities; (5... section 3(b) of the Maritime Drug Enforcement Act, as amended (section 1903(b) of Title 46 App. of the...

  8. 15 CFR 710.1 - Definitions of terms used in the Chemical Weapons Convention Regulations (CWCR).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) Administration and other offices; (2) Repair and maintenance shops; (3) Medical center; (4) Utilities; (5... section 3(b) of the Maritime Drug Enforcement Act, as amended (section 1903(b) of Title 46 App. of the...

  9. 42 CFR 480.102 - Statutory bases for acquisition and maintenance of information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... information. 480.102 Section 480.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION REVIEW INFORMATION Utilization and Quality Control Quality...

  10. HANDBOOK: OPERATION AND MAINTENANCE OF HOSPITAL WASTE INCINERATORS

    EPA Science Inventory

    Proper operation of the incinerator will reduce the emissions of most of these pollutants. ir pollution control devices are available to further control these pollutants. ecause of the national interest in hospital medical waste and the need for technology application, the Center...

  11. Connected Vehicle Pilot Deployment Program Phase 1, Participant Training and Stakeholder Education Plan – Tampa (THEA).

    DOT National Transportation Integrated Search

    2016-08-01

    The Participant Training and Stakeholder Education Plan is a high-level plan for the recruitment and training of all automobile drivers, pedestrians, transit drivers, traffic management center (TMC) operators, and installation and maintenance technic...

  12. Use of a quality improvement tool, the prioritization matrix, to identify and prioritize triage software algorithm enhancement.

    PubMed

    North, Frederick; Varkey, Prathiba; Caraballo, Pedro; Vsetecka, Darlene; Bartel, Greg

    2007-10-11

    Complex decision support software can require significant effort in maintenance and enhancement. A quality improvement tool, the prioritization matrix, was successfully used to guide software enhancement of algorithms in a symptom assessment call center.

  13. 48 CFR 2901.201-1 - Maintenance of the FAR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of the Division of Acquisition Management Services (DAMS), an organization within the Office of Acquisition and Management Support Services, the Business Operations Center, Office of the Assistant Secretary for Administration and Management (OASAM), represents the Department of Labor on the Civilian Agency...

  14. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Comprehensive Needs Assessment, including increasing deposits to the Reserve Fund for Replacements to a limit... (D) A Comprehensive Needs Assessment that finds there are significant repair or maintenance needs...) A score below 60 on the physical inspection conducted by HUD's Real Estate Assessment Center (REAC...

  15. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Comprehensive Needs Assessment, including increasing deposits to the Reserve Fund for Replacements to a limit... (D) A Comprehensive Needs Assessment that finds there are significant repair or maintenance needs...) A score below 60 on the physical inspection conducted by HUD's Real Estate Assessment Center (REAC...

  16. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Comprehensive Needs Assessment, including increasing deposits to the Reserve Fund for Replacements to a limit... (D) A Comprehensive Needs Assessment that finds there are significant repair or maintenance needs...) A score below 60 on the physical inspection conducted by HUD's Real Estate Assessment Center (REAC...

  17. 24 CFR 236.60 - Excess income.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Comprehensive Needs Assessment, including increasing deposits to the Reserve Fund for Replacements to a limit... (D) A Comprehensive Needs Assessment that finds there are significant repair or maintenance needs...) A score below 60 on the physical inspection conducted by HUD's Real Estate Assessment Center (REAC...

  18. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Comprehensive Needs Assessment, including increasing deposits to the Reserve Fund for Replacements to a limit... (D) A Comprehensive Needs Assessment that finds there are significant repair or maintenance needs...) A score below 60 on the physical inspection conducted by HUD's Real Estate Assessment Center (REAC...

  19. Issues Related to Effects of New Maintenance Concept on AF Specialists Working in the Field

    DOT National Transportation Integrated Search

    1990-03-07

    This working paper was prepared by the Transportation Systems Center, Operator : performance and Safety Analysis Division (DTS-45) for the Federal Aviation Ad : ministration. The paper provides initial thinking on groups of human resource issues : re...

  20. Permeable pavement demonstration site at Edison Environmental Center (Presentation)

    EPA Science Inventory

    There are few studies of full-scale, outdoor, replicated, working pervious pavement systems. More studies of pervious pavement operating in its intended use (parking lot, roadway, etc.) during a range of climatic events, daily usage conditions, and maintenance regimes are necessa...

  1. 42 CFR 417.548 - Provider services through arrangements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Provider services through arrangements. 417.548 Section 417.548 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND...

  2. Is there life after DEBI? Examining health behavior maintenance in the diffusion of effective behavioral interventions initiative.

    PubMed

    Feldman, Matthew B; Silapaswan, Andrew; Schaefer, Nathan; Schermele, Daniel

    2014-06-01

    The evidence-based interventions that are identified, packaged, and disseminated by the Division of HIV/AIDS Prevention at the Centers for Disease Control and Prevention as part of the Diffusion of Effective Behavioral Interventions (DEBI) initiative-commonly referred to the "DEBIs"-currently represent a primary source of HIV prevention interventions for community-based providers. To date, little attention has focused on whether the intended outcomes of the DEBIs, i.e., reductions in HIV-related risk behaviors, are maintained over time. This review summarized evidence for the sustainability of the effects of the DEBIs on HIV sexual risk behavior and intravenous drug use from studies of original and adapted DEBIs. Evidence of intervention decay or a lack of any intervention effect was identified in several original and adapted versions of the DEBIs included in this review. Recommendations include modifications to current criteria for inclusion in the DEBI portfolio, in addition to the development of remediation strategies to address intervention decay. Further, theoretical models that specify the processes that underlie the maintenance of health behaviors over time should be used in developing HIV prevention interventions.

  3. Solving complex maintenance planning optimization problems using stochastic simulation and multi-criteria fuzzy decision making

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tahvili, Sahar; Österberg, Jonas; Silvestrov, Sergei

    One of the most important factors in the operations of many cooperations today is to maximize profit and one important tool to that effect is the optimization of maintenance activities. Maintenance activities is at the largest level divided into two major areas, corrective maintenance (CM) and preventive maintenance (PM). When optimizing maintenance activities, by a maintenance plan or policy, we seek to find the best activities to perform at each point in time, be it PM or CM. We explore the use of stochastic simulation, genetic algorithms and other tools for solving complex maintenance planning optimization problems in terms ofmore » a suggested framework model based on discrete event simulation.« less

  4. Data and Data Products for Climate Research: Web Services at the Asia-Pacific Data-Research Center (APDRC)

    NASA Astrophysics Data System (ADS)

    DeCarlo, S.; Potemra, J. T.; Wang, K.

    2012-12-01

    The International Pacific Research Center (IPRC) at the University of Hawaii maintains a data center for climate studies called the Asia-Pacific Data-Research Center (APDRC). This data center was designed within a center of excellence in climate research with the intention of serving the needs of the research scientist. The APDRC provides easy access to a wide collection of climate data and data products for a wide variety of users. The data center maintains an archive of approximately 100 data sets including in-situ and remote data, as well as a range of model-based output. All data are available via on-line browsing tools such as a Live Access Server (LAS) and DChart, and direct binary access is available through OPeNDAP services. On-line tutorials on how to use these services are now available. Users can keep up-to-date with new data and product announcements via the APDRC facebook page. The main focus of the APDRC has been climate scientists, and the services are therefore streamlined to such users, both in the number and types of data served, but also in the way data are served. In addition, due to the integration of the APDRC within the IPRC, several value-added data products (see figure for an example using Argo floats) have been developed via a variety of research activities. The APDRC, therefore, has three main foci: 1. acquisition of climate-related data, 2. maintenance of integrated data servers, and 3. development and distribution of data products The APDRC can be found at http://apdrc.soest.hawaii.edu. The presentation will provide an overview along with specific examples of the data, data products and data services available at the APDRC.; APDRC product example: gridded field from Argo profiling floats

  5. Availability Estimation for Facilities in Extreme Geographical Locations

    NASA Technical Reports Server (NTRS)

    Fischer, Gerd M.; Omotoso, Oluseun; Chen, Guangming; Evans, John W.

    2012-01-01

    A value added analysis for the Reliability. Availability and Maintainability of McMurdo Ground Station was developed, which will be a useful tool for system managers in sparing, maintenance planning and determining vital performance metrics needed for readiness assessment of the upgrades to the McMurdo System. Output of this study can also be used as inputs and recommendations for the application of Reliability Centered Maintenance (RCM) for the system. ReliaSoft's BlockSim. a commercial Reliability Analysis software package, has been used to model the availability of the system upgrade to the National Aeronautics and Space Administration (NASA) Near Earth Network (NEN) Ground Station at McMurdo Station in the Antarctica. The logistics challenges due to the closure of access to McMurdo Station during the Antarctic winter was modeled using a weighted composite of four Weibull distributions. one of the possible choices for statistical distributions throughout the software program and usually used to account for failure rates of components supplied by different manufacturers. The inaccessibility of the antenna site on a hill outside McMurdo Station throughout one year due to severe weather was modeled with a Weibull distribution for the repair crew availability. The Weibull distribution is based on an analysis of the available weather data for the antenna site for 2007 in combination with the rules for travel restrictions due to severe weather imposed by the administrating agency, the National Science Foundation (NSF). The simulations resulted in an upper bound for the system availability and allowed for identification of components that would improve availability based on a higher on-site spare count than initially planned.

  6. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  7. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  8. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  9. Software Maintenance.

    ERIC Educational Resources Information Center

    Cannon, Glenn; Jobe, Holly

    Proper cleaning and storage of audiovisual aids is outlined in this brief guide. Materials and equipment needed for first line maintenance are listed, as well as maintenance procedures for records, audio and video tape, film, filmstrips, slides, realia, models, prints, graphics, maps, and overhead transparencies. A 15-item quiz on software…

  10. On the application of copula in modeling maintenance contract

    NASA Astrophysics Data System (ADS)

    Iskandar, B. P.; Husniah, H.

    2016-02-01

    This paper deals with the application of copula in maintenance contracts for a nonrepayable item. Failures of the item are modeled using a two dimensional approach where age and usage of the item and this requires a bi-variate distribution to modelling failures. When the item fails then corrective maintenance (CM) is minimally repaired. CM can be outsourced to an external agent or done in house. The decision problem for the owner is to find the maximum total profit whilst for the agent is to determine the optimal price of the contract. We obtain the mathematical models of the decision problems for the owner as well as the agent using a Nash game theory formulation.

  11. Alternative Fuels Data Center

    Science.gov Websites

    Construction Clean Construction is a voluntary program that promotes the reduction of diesel exhaust emissions from construction equipment and vehicles by encouraging proper operations and maintenance, use of emissions-reducing technologies, and use of cleaner fuels. Clean Construction is part of

  12. 42 CFR 417.101 - Health benefits plan: Basic health services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Health benefits plan: Basic health services. 417.101 Section 417.101 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE...

  13. 42 CFR 417.102 - Health benefits plan: Supplemental health services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Health benefits plan: Supplemental health services. 417.102 Section 417.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS...

  14. 42 CFR 417.105 - Payment for supplemental health services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Payment for supplemental health services. 417.105 Section 417.105 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  15. 42 CFR 417.105 - Payment for supplemental health services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Payment for supplemental health services. 417.105 Section 417.105 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  16. 42 CFR 417.102 - Health benefits plan: Supplemental health services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Health benefits plan: Supplemental health services. 417.102 Section 417.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  17. 42 CFR 417.101 - Health benefits plan: Basic health services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Health benefits plan: Basic health services. 417.101 Section 417.101 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE...

  18. 42 CFR 417.101 - Health benefits plan: Basic health services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Health benefits plan: Basic health services. 417.101 Section 417.101 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE...

  19. 42 CFR 417.102 - Health benefits plan: Supplemental health services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Health benefits plan: Supplemental health services. 417.102 Section 417.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS...

  20. 42 CFR 417.102 - Health benefits plan: Supplemental health services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Health benefits plan: Supplemental health services. 417.102 Section 417.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS...

  1. 42 CFR 417.105 - Payment for supplemental health services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Payment for supplemental health services. 417.105 Section 417.105 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND...

  2. 42 CFR 417.102 - Health benefits plan: Supplemental health services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Health benefits plan: Supplemental health services. 417.102 Section 417.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  3. Permeable Pavement Demonstration at the Edison Environmental Center (Hartford)

    EPA Science Inventory

    In general, there is a lack of full-scale, outdoor, real-world porous pavement studies with system replicates. More studies of porous pavement operating in its intended use (parking lot, roadway, etc.) with climatic events, regular use, and maintenance effects, are necessary. The...

  4. Computer Operating System Maintenance.

    DTIC Science & Technology

    1982-06-01

    FACILITY The Computer Management Information Facility ( CMIF ) system was developed by Rapp Systems to fulfill the need at the CRF to record and report on...computer center resource usage and utilization. The foundation of the CMIF system is a System 2000 data base (CRFMGMT) which stores and permits access

  5. A catalog of graphic symbols used at maintenance control centers : toward a symbol standardization process.

    DOT National Transportation Integrated Search

    2002-04-01

    This document catalogs the symbols presented with the various interfaces used by Federal Aviation Administration Airway Facilities specialists. It includes a high-level overview of each system and the symbols and coding conventions used. These data w...

  6. Permeable pavement demonstration at the Edison Environmental Center (Hartford, CT)

    EPA Science Inventory

    In general, there is a lack of full-scale, outdoor, real-world porous pavement studies with system replicates. More studies of porous pavement operating in its intended use (parking lot, roadway, etc.) with climatic events, regular use, and maintenance effects, are necessary. The...

  7. 42 CFR 417.484 - Requirement applicable to related entities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Requirement applicable to related entities. 417.484 Section 417.484 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  8. 42 CFR 417.484 - Requirement applicable to related entities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Requirement applicable to related entities. 417.484 Section 417.484 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM (CONTINUED) HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL...

  9. Computer Assisted Multi-Center Creation of Medical Knowledge Bases

    PubMed Central

    Giuse, Nunzia Bettinsoli; Giuse, Dario A.; Miller, Randolph A.

    1988-01-01

    Computer programs which support different aspects of medical care have been developed in recent years. Their capabilities range from diagnosis to medical imaging, and include hospital management systems and therapy prescription. In spite of their diversity these systems have one commonality: their reliance on a large body of medical knowledge in computer-readable form. This knowledge enables such programs to draw inferences, validate hypotheses, and in general to perform their intended task. As has been clear to developers of such systems, however, the creation and maintenance of medical knowledge bases are very expensive. Practical and economical difficulties encountered during this long-term process have discouraged most attempts. This paper discusses knowledge base creation and maintenance, with special emphasis on medical applications. We first describe the methods currently used and their limitations. We then present our recent work on developing tools and methodologies which will assist in the process of creating a medical knowledge base. We focus, in particular, on the possibility of multi-center creation of the knowledge base.

  10. Performing saccadic eye movements or blinking improves postural control.

    PubMed

    Rougier, Patrice; Garin, Mélanie

    2007-07-01

    To determine the relationship between eye movement and postural control on an undisturbed upright stance maintenance protocol, 15 young, healthy individuals were tested in various conditions. These conditions included imposed blinking patterns and horizontal and vertical saccadic eye movements. The directions taken by the center of pressure (CP) were recorded via a force platform on which the participants remained in an upright position. The CP trajectories were used to estimate, via a low-pass filter, the vertically projected movements of the center of gravity (CGv) and consequently the difference CP-CGv. An analysis of the frequency shows that regular bilateral blinking does not produce a significant change in postural control. In contrast, performing saccadic eye movements induces some reduced amplitude for both basic CGv and CP-CGv movements principally along the antero-posterior axis. The present result supports the theory that some ocular movements may modify postural control in the maintenance of the upright standing position in human participants.

  11. Launch Complex 39A, SWMU 008, Operations, Maintenance, and Monitoring Report, Kennedy Space Center, FL

    NASA Technical Reports Server (NTRS)

    Wilson, Deborah M.

    2016-01-01

    This Operations, Maintenance, and Monitoring Report (OMMR) presents the findings, observations, and results from Year 1 operation of the air sparging (AS) groundwater interim measure (IM) for High-Concentration Plumes (HCPs) and Low-Concentration Plumes (LCPs) within the perimeter fence line at Launch Complex 39A (LC39A) located at Kennedy Space Center (KSC), Florida. The objective of the LC39A groundwater IM is to actively decrease concentrations of trichloroethene (TCE), cis-1,2-dichloroethene (cDCE), and vinyl chloride (VC) in groundwater in the HCP and LCP within the pad perimeter fence line via AS to levels less than Florida Department of Environmental Protection (FDEP) Groundwater Cleanup Target Levels (GCTLs). The objective was developed because LC39A is currently being leased to Space Exploration Technologies (SpaceX), and the original IM for monitored natural attenuation (MNA) over an extended period of time was not suitable for future planned site use.

  12. KSC00pp1858

    NASA Image and Video Library

    2000-12-07

    KENNEDY SPACE CENTER, FLA. -- STS-107 Mission Specialists David M. Brown (center) and Michael Anderson (right) get information about one of the Biological Research in Canisters (BRIC) experiments that will be on their mission. At left is Payload Specialist Ilan Ramon of Israel. The crew has been taking part in In-Flight Maintenance training at SPACEHAB, in Cape Canaveral, Fla., for their mission. STS-107 will carry a broad collection of experiments ranging from material science to life science. It is scheduled to launch July 19, 2001

  13. KSC-00pp1858

    NASA Image and Video Library

    2000-12-07

    KENNEDY SPACE CENTER, FLA. -- STS-107 Mission Specialists David M. Brown (center) and Michael Anderson (right) get information about one of the Biological Research in Canisters (BRIC) experiments that will be on their mission. At left is Payload Specialist Ilan Ramon of Israel. The crew has been taking part in In-Flight Maintenance training at SPACEHAB, in Cape Canaveral, Fla., for their mission. STS-107 will carry a broad collection of experiments ranging from material science to life science. It is scheduled to launch July 19, 2001

  14. [AVIATION MEDICINE: THEORETICAL CONCEPTS AND FOCAL FUNDAMENTAL AND PRACTICAL ISSUES (for the 80th anniversary of the Research Test Center of Aerospace Medicine and Military Ergonomics)].

    PubMed

    Zhdanko, I M; Pisarev, A A; Vorona, A A; Lapa, V V; Khomenko, M N

    2015-01-01

    The article discloses postulates of theoretical concepts that make the methodological basis for addressing the real-world aviation medicine challenges of humanizing aviator's environment, labor content and means, and health and performance maintenance. Under consideration are focal fundamental and practical issues arising with the technological progress in aviation and dealt with at the AF CRI Research Test Center of Aerospace Medicine and Military Ergonomics.

  15. Contrast between Management Information Needs and Information Provided by Industrial Accounting/Control Systems Employed at Selected Coast Guard in House Maintenance Activities.

    DTIC Science & Technology

    1979-12-01

    degree of MASTER OF SCIENCE IN MANAGEMENT from the t NAVAL POSTGRADUATE SCHOOL December 1979 Author 7 tQ . ~ a Approved by...Thesis Advisor Second Reader irman, Department of Administrative Science Deno 7 _a tion and Policy Sciences 3 Roo m ,.WOEP-r1P ABSTRACT This...and Supply Center Work Progress Report #1, Aircraft Rework 41 VIII. Exhibit 2- 7 USCG Aircraft Repair and Supply Center Work Progress Report #5, Direct

  16. U.S. Army Dugway Proving Ground, UT and the West Desert Test Center

    DTIC Science & Technology

    2001-04-30

    Optic Network •32 Channels of Video •7 Communications Consoles with 20 Radio Nets and Phone Patch •Over 40 Communication Drops & Cell Phones •Centralized... Phone Tower Sites Cell Phone Activation May ‘01 Logistical Support Full Serv ice Com mun ity l Ground Transportation and Maintenance – Vehicle Support...Voice, Data & Video Communications in Mission Control Center •Data Speed: 100 MB/sec •Ethernet Connections •Commercial Power to most Sites Cell

  17. KSC-00pp1842

    NASA Image and Video Library

    2000-12-05

    KENNEDY SPACE CENTER, Fla. -- STS-107 crew members take part in In-Flight Maintenance training for their mission. Under the watchful eyes of SPACEHAB trainer David Butler (left), Payload Specialist Ilan Ramon of Israel (center) and Mission Specialist David M. Brown (right) check equipment and paperwork inside the SPACEHAB Double Module. Research mission STS-107, scheduled to launch July 19, 2001, will carry the SPACEHAB Double Module in its first flight into space and a broad collection of experiments ranging from material science to life science

  18. KSC00pp1842

    NASA Image and Video Library

    2000-12-05

    KENNEDY SPACE CENTER, Fla. -- STS-107 crew members take part in In-Flight Maintenance training for their mission. Under the watchful eyes of SPACEHAB trainer David Butler (left), Payload Specialist Ilan Ramon of Israel (center) and Mission Specialist David M. Brown (right) check equipment and paperwork inside the SPACEHAB Double Module. Research mission STS-107, scheduled to launch July 19, 2001, will carry the SPACEHAB Double Module in its first flight into space and a broad collection of experiments ranging from material science to life science

  19. Safety and Efficacy of PDpoetin for Management of Anemia in Patients with end Stage Renal Disease on Maintenance Hemodialysis: Results from a Phase IV Clinical Trial.

    PubMed

    Javidan, Abbas Norouzi; Shahbazian, Heshmatollah; Emami, Amirhossein; Yekaninejad, Mir Saeed; Emami-Razavi, Hassan; Farhadkhani, Masoumeh; Ahmadzadeh, Ahmad; Gorjipour, Fazel

    2014-08-26

    Recombinant human erythropoietin (rHuEPO) is available for correcting anemia. PDpoetin, a new brand of rHuEPO, has been certified by Food and Drug Department of Ministry of Health and Medical Education of Iran for clinical use in patients with chronic kidney disease. We conducted this post-marketing survey to further evaluate the safety and efficacy of PDpoetin for management of anemia in patients on maintenance hemodialysis. Patients from 4 centers in Iran were enrolled for this multicenter, open-label, uncontrolled phase IV clinical trial. Changes in blood chemistry, hemoglobin and hematocrit levels, renal function, and other characteristics of the patients were recorded for 4 months; 501 of the patients recruited, completed this study. Mean age of the patients was 50.9 (±16.2) years. 48.7% of patients were female. Mean of the hemoglobin value in all of the 4 centers was 9.29 (±1.43) g/dL at beginning of the study and reached 10.96 (±2.23) g/dL after 4 months and showed significant increase overall (P<0.001). PDpoetin dose was stable at 50-100 U/kg thrice weekly. Hemorheologic disturbancesand changes in blood electrolytes was not observed. No case of immunological reactions to PDpoetin was observed. Our study, therefore, showed that PDpoetin has significantly raised the level of hemoglobin in the hemodialysis patients (about 1.7±0.6 g/dL). Anemia were successfully corrected in 49% of patients under study. Use of this biosimilar was shown to be safe and effective for the maintenance of hemoglobin in patients on maintenance hemodialysis.

  20. A proven approach for more effective software development and maintenance

    NASA Technical Reports Server (NTRS)

    Pajerski, Rose; Hall, Dana; Sinclair, Craig

    1994-01-01

    Modern space flight mission operations and associated ground data systems are increasingly dependent upon reliable, quality software. Critical functions such as command load preparation, health and status monitoring, communications link scheduling and conflict resolution, and transparent gateway protocol conversion are routinely performed by software. Given budget constraints and the ever increasing capabilities of processor technology, the next generation of control centers and data systems will be even more dependent upon software across all aspects of performance. A key challenge now is to implement improved engineering, management, and assurance processes for the development and maintenance of that software; processes that cost less, yield higher quality products, and that self-correct for continual improvement evolution. The NASA Goddard Space Flight Center has a unique experience base that can be readily tapped to help solve the software challenge. Over the past eighteen years, the Software Engineering Laboratory within the code 500 Flight Dynamics Division has evolved a software development and maintenance methodology that accommodates the unique characteristics of an organization while optimizing and continually improving the organization's software capabilities. This methodology relies upon measurement, analysis, and feedback much analogous to that of control loop systems. It is an approach with a time-tested track record proven through repeated applications across a broad range of operational software development and maintenance projects. This paper describes the software improvement methodology employed by the Software Engineering Laboratory, and how it has been exploited within the Flight Dynamics Division with GSFC Code 500. Examples of specific improvement in the software itself and its processes are presented to illustrate the effectiveness of the methodology. Finally, the initial findings are given when this methodology was applied across the mission operations and ground data systems software domains throughout Code 500.

  1. A Context Maintenance and Retrieval Model of Organizational Processes in Free Recall

    ERIC Educational Resources Information Center

    Polyn, Sean M.; Norman, Kenneth A.; Kahana, Michael J.

    2009-01-01

    The authors present the context maintenance and retrieval (CMR) model of memory search, a generalized version of the temporal context model of M. W. Howard and M. J. Kahana (2002a), which proposes that memory search is driven by an internally maintained context representation composed of stimulus-related and source-related features. In the CMR…

  2. System Modeling and Diagnostics for Liquefying-Fuel Hybrid Rockets

    NASA Technical Reports Server (NTRS)

    Poll, Scott; Iverson, David; Ou, Jeremy; Sanderfer, Dwight; Patterson-Hine, Ann

    2003-01-01

    A Hybrid Combustion Facility (HCF) was recently built at NASA Ames Research Center to study the combustion properties of a new fuel formulation that burns approximately three times faster than conventional hybrid fuels. Researchers at Ames working in the area of Integrated Vehicle Health Management recognized a good opportunity to apply IVHM techniques to a candidate technology for next generation launch systems. Five tools were selected to examine various IVHM techniques for the HCF. Three of the tools, TEAMS (Testability Engineering and Maintenance System), L2 (Livingstone2), and RODON, are model-based reasoning (or diagnostic) systems. Two other tools in this study, ICS (Interval Constraint Simulator) and IMS (Inductive Monitoring System) do not attempt to isolate the cause of the failure but may be used for fault detection. Models of varying scope and completeness were created, both qualitative and quantitative. In each of the models, the structure and behavior of the physical system are captured. In the qualitative models, the temporal aspects of the system behavior and the abstraction of sensor data are handled outside of the model and require the development of additional code. In the quantitative model, less extensive processing code is also necessary. Examples of fault diagnoses are given.

  3. Exploring the usefulness of comprehensive care plans for children with medical complexity (CMC): a qualitative study.

    PubMed

    Adams, Sherri; Cohen, Eyal; Mahant, Sanjay; Friedman, Jeremy N; Macculloch, Radha; Nicholas, David B

    2013-01-19

    The Medical Home model recommends that Children with Special Health Care Needs (CSHCN) receive a medical care plan, outlining the child's major medical issues and care needs to assist with care coordination. While care plans are a primary component of effective care coordination, the creation and maintenance of care plans is time, labor, and cost intensive, and the desired content of the care plan has not been studied. The purpose of this qualitative study was to understand the usefulness and desired content of comprehensive care plans by exploring the perceptions of parents and health care providers (HCPs) of children with medical complexity (CMC). This qualitative study utilized in-depth semi-structured interviews and focus groups. HCPs (n = 15) and parents (n = 15) of CMC who had all used a comprehensive care plan were recruited from a tertiary pediatric academic health sciences center. Themes were identified through grounded theory analysis of interview and focus group data. A multi-dimensional model of perceived care plan usefulness emerged. The model highlights three integral aspects of the care plan: care plan characteristics, activating factors and perceived outcomes of using a care plan. Care plans were perceived as a useful tool that centralized and focused the care of the child. Care plans were reported to flatten the hierarchical relationship between HCPs and parents, resulting in enhanced reciprocal information exchange and strengthened relationships. Participants expressed that a standardized template that is family-centered and includes content relevant to both the medical and social needs of the child is beneficial when integrated into overall care planning and delivery for CMC. Care plans are perceived to be a useful tool to both health care providers and parents of CMC. These findings inform the utility and development of a comprehensive care plan template as well as a model of how and when to best utilize care plans within family-centered models of care.

  4. Space Flight Operations Center local area network

    NASA Technical Reports Server (NTRS)

    Goodman, Ross V.

    1988-01-01

    The existing Mission Control and Computer Center at JPL will be replaced by the Space Flight Operations Center (SFOC). One part of the SFOC is the LAN-based distribution system. The purpose of the LAN is to distribute the processed data among the various elements of the SFOC. The SFOC LAN will provide a robust subsystem that will support the Magellan launch configuration and future project adaptation. Its capabilities include (1) a proven cable medium as the backbone for the entire network; (2) hardware components that are reliable, varied, and follow OSI standards; (3) accurate and detailed documentation for fault isolation and future expansion; and (4) proven monitoring and maintenance tools.

  5. [Family odysseys: the search for infant mental health care].

    PubMed

    Delfini, Patricia Santos de Souza; Bastos, Isabella Teixeira; Reis, Alberto Olavo Advincula

    2017-12-18

    The aim was to analyze the peregrination of families of children treated in a Center for Psychosocial Care for Children and Adolescents in their search for mental health care. The study included participant observations at the clinic and focus groups with the children's families. The qualitative study used institutional analysis as the theoretical and methodological reference, and the material was discussed in light of the approach to psychosocial care. The families' search in the face of the child's psychological distress is a prime indicator for assessing strengths and weaknesses in building the network of care, and for revealing the families' understanding of their children's mental health problems and treatments. The study found contradictory forces at play in daily care, demonstrating both the provider's transformative force and occasionally the user's crystallization and maintenance. In this sense, the hegemonic model - disease-centered, fragmenting patients and their care - has been challenged by the instituting force that proposes to reposition the patient and incorporate psychological distress as part of overall health, linking services and actions in a model of care. Despite the tangled maze that families face in their peregrination for care, strides have been made in psychosocial care, while highlighting challenges. Such progress has been anchored in relational technologies (shelter, bonding, trust, and accountability) with the various actors involved in the care.

  6. Decisional balance and self-efficacy of physical activity among the elderly in Rasht in 2013 based on the transtheoretical model

    PubMed Central

    Abbaspour, Seddigheh; Farmanbar, Rabiollah; Njafi, Fateme; Ghiasvand, Arezoo Mohamadkhani; Dehghankar, Leila

    2017-01-01

    Background Regular physical activity has been considered as health promotion, and identifying different effective psycho-social variables on physical has proven to be essential. Objective To identify the relationship between decisional balance and self-efficacy in physical activities using the transtheoretical model in the members of a retirement center in Rasht, Guillen. Methods A descriptive cross-sectional study was conducted in 2013 by using convenient sampling on 262 elderly people who are the members of retirement centers in Rasht. Data were collected using Stages of change, Decisional balance, Self-efficacy and Physical Activity Scale for the Elderly (PASE). Data was analyzed using SPSS-16 software, descriptive and analytic statistic (Pearson correlation, Spearman, ANOVA, HSD Tukey, linear and ordinal regression). Results The majority of participants were in maintenance stage. Mean and standard deviation physical activity for the elderly was 119.35±51.50. Stages of change and physical activities were significantly associated with decisional balance and self-efficacy (p<0.0001); however, cons had a significant and reverse association. According to linear and ordinal regression the only predicator variable of physical activity behavior was self-efficacy. Conclusion By increase in pros and self-efficacy on doing physical activity, it can be benefited in designing appropriate intervention programs. PMID:28713520

  7. 77 FR 18141 - Airworthiness Directives; Fokker Services B.V. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-27

    ...) fuel quantity indication system (FQIS) probe and the bottom of the tank structure. This condition, if... the aircraft maintenance program by revising the fuel airworthiness limitations and incorporating... Integral Center Wing Tank (ICWT) Fuel Quantity Indication System (FQIS) probe and the bottom of the tank...

  8. The Impact of Recreational Facilities on National Park Landscapes.

    ERIC Educational Resources Information Center

    Fitzsimmons, Allan K.

    1979-01-01

    Discusses a study to examine developed acreage in 14 national parks. Total park acreage is compared to service center and campground acreage and total mileage of primary and secondary roads. The most probable future for national park landscapes is maintenance of the status quo. (Author/KC)

  9. Medical operations and life sciences activities on space station

    NASA Technical Reports Server (NTRS)

    Johnson, P. C. (Editor); Mason, J. A. (Editor)

    1982-01-01

    Space station health maintenance facilities, habitability, personnel, and research in the medical sciences and in biology are discussed. It is assumed that the space station structure will consist of several modules, each being consistent with Orbiter payload bay limits in size, weight, and center of gravity.

  10. 42 CFR 417.101 - Health benefits plan: Basic health services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Health benefits plan: Basic health services. 417.101 Section 417.101 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS...

  11. 42 CFR 460.202 - Participant health outcomes data.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Participant health outcomes data. 460.202 Section 460.202 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... FOR THE ELDERLY (PACE) Data Collection, Record Maintenance, and Reporting § 460.202 Participant health...

  12. 42 CFR 460.202 - Participant health outcomes data.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Participant health outcomes data. 460.202 Section 460.202 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... FOR THE ELDERLY (PACE) Data Collection, Record Maintenance, and Reporting § 460.202 Participant health...

  13. 42 CFR 460.202 - Participant health outcomes data.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Participant health outcomes data. 460.202 Section 460.202 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... FOR THE ELDERLY (PACE) Data Collection, Record Maintenance, and Reporting § 460.202 Participant health...

  14. 42 CFR 417.101 - Health benefits plan: Basic health services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Health benefits plan: Basic health services. 417.101 Section 417.101 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS...

  15. 42 CFR 460.202 - Participant health outcomes data.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 4 2013-10-01 2013-10-01 false Participant health outcomes data. 460.202 Section 460.202 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... FOR THE ELDERLY (PACE) Data Collection, Record Maintenance, and Reporting § 460.202 Participant health...

  16. 42 CFR 460.202 - Participant health outcomes data.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Participant health outcomes data. 460.202 Section 460.202 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... FOR THE ELDERLY (PACE) Data Collection, Record Maintenance, and Reporting § 460.202 Participant health...

  17. 29. Perimeter acquisition radar building room #318, data processing system ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Perimeter acquisition radar building room #318, data processing system area; data processor maintenance and operations center, showing data processing consoles - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND

  18. 42 CFR 417.423 - Special rules: ESRD and hospice patients.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Special rules: ESRD and hospice patients. 417.423 Section 417.423 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND...

  19. 42 CFR 417.520 - Effect on HMO and CMP contracts.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 417.520 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND... these provisions, references to “M+C organizations” must be read as references to “HMOs and CMPs”. (c...

  20. 42 CFR 480.102 - Statutory bases for acquisition and maintenance of information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information. 480.102 Section 480.102 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND... medical necessity and quality of health care services they provide to Medicare patients as required by...

  1. Learning Center: Introducing "Sherman" the Sow Bug.

    ERIC Educational Resources Information Center

    Armstrong, Beverly; Moore, Charlotte

    1982-01-01

    Offers suggestions for using sow bugs in the classroom, including maintenance, source (found virtually everywhere in damp soil), background information, bibliography, and bulletin board idea. Includes instructions and materials (clue cards) for a fact-finding and hypothesis-testing game in which students determine what kind of an animal…

  2. Developing Local Community Leaders.

    ERIC Educational Resources Information Center

    Dyer, Delwyn A.; Williams, Oscar M.

    The successful development of local leaders is the goal of leadership training and community development. Development involves defining and developing leadership. Although leader-centered leadership offers few chances of meeting the maintenance needs of the group as a whole, shared leadership allows the group to join in the decision-making…

  3. Promoting Maintenance and Generalization through Cognitive Decision Making Training

    ERIC Educational Resources Information Center

    Fore, Cecil, III; Riser, Susan E.

    2005-01-01

    This article investigates issues in the areas of work outcomes, self-determination, career decision-making skills, person centered planning, and transitional planning for students with disabilities. In particular, training in cognitive decision-making is suggested for students with mild disabilities. Educators and schools are charged with…

  4. The Six Habits of Fiscally Responsible Public School Districts. A Mackinac Center Report.

    ERIC Educational Resources Information Center

    Johnson, Kirk A.; Moser, Elizabeth H.

    For Michigan, like many other states, providing noninstructional services strains public school district budgets. School districts provide more transportation, food, maintenance, and counseling services than ever before. In some cases, noninstructional expenses exceed classroom expenses. Seven states, including Michigan, employ more nonteachers…

  5. Iowa Supplement...For Commercial Applicators. IC-427.

    ERIC Educational Resources Information Center

    Iowa State Univ. of Science and Technology, Ames. Cooperative Extension Service.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text outlines the procedures to be followed for certification. Additionally, a general overview of important data such as toxicity of pesticides, poison control centers, record keeping, equipment maintenance and liability is…

  6. Wrist Camera Orientation for Effective Telerobotic Orbital Replaceable Unit (ORU) Changeout

    NASA Technical Reports Server (NTRS)

    Jones, Sharon Monica; Aldridge, Hal A.; Vazquez, Sixto L.

    1997-01-01

    The Hydraulic Manipulator Testbed (HMTB) is the kinematic replica of the Flight Telerobotic Servicer (FTS). One use of the HMTB is to evaluate advanced control techniques for accomplishing robotic maintenance tasks on board the Space Station. Most maintenance tasks involve the direct manipulation of the robot by a human operator when high-quality visual feedback is important for precise control. An experiment was conducted in the Systems Integration Branch at the Langley Research Center to compare several configurations of the manipulator wrist camera for providing visual feedback during an Orbital Replaceable Unit changeout task. Several variables were considered such as wrist camera angle, camera focal length, target location, lighting. Each study participant performed the maintenance task by using eight combinations of the variables based on a Latin square design. The results of this experiment and conclusions based on data collected are presented.

  7. 76 FR 19716 - Airworthiness Directives; BAE SYSTEMS (Operations) Limited Model 4101 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ... Jetstream J41 Aircraft Maintenance Manual (AMM), includes the following chapters: --05-10-10 ``Airworthiness... Jetstream Series 4100 Aircraft Maintenance Manual, Revision 33, dated February 15, 2010. The actions...: * * * BAE Systems (Operations) Ltd has issued Revision 33 of the AMM [airplane maintenance manual] to amend...

  8. 75 FR 906 - Airworthiness Directives; The Boeing Company Model 747-400, -400D, and -400F Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-07

    ... aircraft for which a manufacturer's maintenance manual or instructions for continued airworthiness has been... maintenance program by incorporating new airworthiness limitations (AWLs) for fuel tank systems to satisfy... latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel...

  9. Airline Maintenance Manpower Optimization from the De Novo Perspective

    NASA Astrophysics Data System (ADS)

    Liou, James J. H.; Tzeng, Gwo-Hshiung

    Human resource management (HRM) is an important issue for today’s competitive airline marketing. In this paper, we discuss a multi-objective model designed from the De Novo perspective to help airlines optimize their maintenance manpower portfolio. The effectiveness of the model and solution algorithm is demonstrated in an empirical study of the optimization of the human resources needed for airline line maintenance. Both De Novo and traditional multiple objective programming (MOP) methods are analyzed. A comparison of the results with those of traditional MOP indicates that the proposed model and solution algorithm does provide better performance and an improved human resource portfolio.

  10. Modeling strength data for CREW CHIEF

    NASA Technical Reports Server (NTRS)

    Mcdaniel, Joe W.

    1990-01-01

    The Air Force has developed CREW CHIEF, a computer-aided design (CAD) tool for simulating and evaluating aircraft maintenance to determine if the required activities are feasible. CREW CHIEF gives the designer the ability to simulate maintenance activities with respect to reach, accessibility, strength, hand tool operation, and materials handling. While developing the CREW CHIEF, extensive research was performed to describe workers strength capabilities for using hand tools and manual handling of objects. More than 100,000 strength measures were collected and modeled for CREW CHIEF. These measures involved both male and female subjects in the 12 maintenance postures included in CREW CHIEF. The data collection and modeling effort are described.

  11. Performance of Water Recirculation Loop Maintentance Components for the Advanced Spacesuit Water Membrane Evaporator

    NASA Technical Reports Server (NTRS)

    Rector, Tony; Peyton, Barbara; Steele, John W.; Bue, Grant C.; Campbell, Colin; Makinen, Janice

    2014-01-01

    Water loop maintenance components to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop have undergone a comparative performance evaluation with a second SWME water recirculation loop with no water quality maintenance. Results show the benefits of periodic water maintenance. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the evaluation of water recirculation maintenance components was to further enhance this advantage through the leveraging of fluid loop management lessonslearned from the International Space Station (ISS). A bed design that was developed for a UTAS military application, and considered for a potential ISS application with the Urine Processor Assembly, provided a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance cycle included the use of a biocide delivery component developed for ISS to introduce a biocide in a microgravity-compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  12. An intact centrosome is required for the maintenance of polarization during directional cell migration.

    PubMed

    Wakida, Nicole M; Botvinick, Elliot L; Lin, Justin; Berns, Michael W

    2010-12-23

    Establishing and maintaining polarization is critical during cell migration. It is known that the centrosome contains numerous proteins whose roles of organizing the microtubule network range include nucleation, stabilization and severing. It is not known whether the centrosome is necessary to maintain polarization. Due to its role as the microtubule organizing center, we hypothesize that the centrosome is necessary to maintain polarization in a migrating cell. Although there have been implications of its role in cell migration, there is no direct study of the centrosome's role in maintaining polarization. In this study we ablate the centrosome by intracellular laser irradiation to understand the role of the centrosome in two vastly different cell types, human osteosarcoma (U2OS) and rat kangaroo kidney epithelial cells (PtK). The PtK cell line has been extensively used as a model for cytoskeletal dynamics during cell migration. The U2OS cell line serves as a model for a complex, single migrating cell. In this study we use femtosecond near-infrared laser irradiation to remove the centrosome in migrating U2OS and PtK2 cells. Immunofluorescence staining for centrosomal markers verified successful irradiation with 94% success. A loss of cell polarization is observed between 30 and 90 minutes following removal of the centrosome. Changes in cell shape are correlated with modifications in microtubule and actin organization. Changes in cell morphology and microtubule organization were quantified revealing significant depolarization resulting from centrosome irradiation. This study demonstrates that the centrosome is necessary for the maintenance of polarization during directed cell migration in two widely different cell types. Removal of the centrosome from a polarized cell results in the reorganization of the microtubule network into a symmetric non-polarized phenotype. These results demonstrate that the centrosome plays a critical role in the maintenance of cytoskeletal asymmetry during cell migration.

  13. BIM authoring for an image-based bridge maintenance system of existing cable-supported bridges

    NASA Astrophysics Data System (ADS)

    Dang, N. S.; Shim, C. S.

    2018-04-01

    Infrastructure nowadays is increasingly become the main backbone for the metropolitan development in general. Along with the rise of new facilities, the demand in term of maintenance for the existing bridges is indispensable. Recently, the terminology of “preventive maintenance” is not unfamiliar with the engineer, literally is the use of a bridge maintenance system (BMS) based on a BIM-oriented model. In this paper, the process of generating a BMS based on BIM model is introduced in detail. Data management for this BMS is separated into two modules: site inspection system and information management system. The noteworthy aspect of this model lays on the closed and automatic process of “capture image, generate the technical damage report, and upload/feedback to the BMS” in real-time. A pilot BMS system for a cable-supported bridge is presented which showed a good performance and potential to further development of preventive maintenance.

  14. Engaging Frontline Staff in Central Line-Associated Bloodstream Infection Prevention Practice in the Wake of Superstorm Sandy.

    PubMed

    Rosenberg, Rebecca E; Devins, Lea; Geraghty, Gail; Bock, Steven; Dugan, Christina A; Transou, Marjorie; Phillips, Michael; Lighter-Fisher, Jennifer

    2015-10-01

    Central venous catheters are crucial devices in the care of hospitalized children, both in and out of critical care units, but the concomitant risk of central line-associated bloodstream infection (CLABSI) affects 15,000 Americans annually. In 2012, CLABSI rates varied among units from 6.8/1,000 to 1.0/1,000 in a 109-bed children's service within NYU Langone Medical Center (NYULMC; New York City), a 1,069-bed tertiary care academic medical center. In response to variation in central line-related practices and infection prevention rates, a CLABSI Prevention Core Team began an effort to standardize central venous catheter (CVC) care across all pediatric units (ICU and non-ICU). Momentum in this quality improvement (QI) work was interrupted when Superstorm Sandy shuttered the flagship hospital, but the relatively decreased clinical load provided a "downtime" opportunity to address CLABSI prevention. The first phase of the collaborative effort, Booster 1, Planning/Initial Phase: Development of a Pediatric Central Venous Catheter Working Group, was followed by Booster 2, Maintenance/Sustaining Phase: Transitioning for Sustainability and Adopting Model for Improvement. Data in the subsequent 21 months after the temporary closure of the facility (January 2013-September 2014) showed an increase in maintenance bundle reliability. The inpatient CLABSI rate for patients<18 years decreased from an annual rate of 2.7/1,000 line days (2012) to 0.6/1,000 line days (2013) to 0.5/1,000 line days as of August 2014. There was a decrease in pediatric CLABSI events and no significant change in line days. Key elements contributing to initial success with evolving QI capacity and resources were likely multi-factorial, including staff and leadership engagement, culture change, consistent guidelines, and accountability by individuals and by our multidisciplinary core team.

  15. Policy for equipment’s leasing period extension with minimum cost of maintenance

    NASA Astrophysics Data System (ADS)

    Lestari, C.; Kurniati, N.

    2018-04-01

    The cost structure for equipment investment including purchase cost and maintenance cost is getting more expensive. The company considers to lease the equipment instead of purchase it under a contractual agreement. Offering to extend the lease period, following to the base lease period, will provide more benefits for both the lessor (owner) and the lessee (user). Whenever the lease period extension offered at the beginning of the contract, there are some risks in finance e.g. uncertainty of the equipment performance and lessor responsibility. Therefore, this research attempts to model the optimal maintenance policy for lease period extension offered at the end of the contract. Minimal repair is performed to rectify a failed equipment, while imperfect preventive maintenance is conducted to improve the operational state of the equipment when reaches a certain control limit to avoid failures. The mathematical model is constructed to determine the optimal control limit, the number and degree of preventive maintenance, and the multiplication number of the lease period extension. Finally, numerical examples are given to illustrate the influences of the optimal length of the extended lease and the maintenance policy to minimize the maintenance cost.

  16. Automotive Maintenance Data Base for Model Years 1976-1979. Part I

    DOT National Transportation Integrated Search

    1980-12-01

    An update of the existing data base was developed to include life cycle maintenance costs of representative vehicles for the model years 1976-1979. Repair costs as a function of time are also developed for a passenger car in each of the compact, subc...

  17. Framework and implementation of a continuous network-wide health monitoring system for roadways

    NASA Astrophysics Data System (ADS)

    Wang, Ming; Birken, Ralf; Shahini Shamsabadi, Salar

    2014-03-01

    According to the 2013 ASCE report card America's infrastructure scores only a D+. There are more than four million miles of roads (grade D) in the U.S. requiring a broad range of maintenance activities. The nation faces a monumental problem of infrastructure management in the scheduling and implementation of maintenance and repair operations, and in the prioritization of expenditures within budgetary constraints. The efficient and effective performance of these operations however is crucial to ensuring roadway safety, preventing catastrophic failures, and promoting economic growth. There is a critical need for technology that can cost-effectively monitor the condition of a network-wide road system and provide accurate, up-to-date information for maintenance activity prioritization. The Versatile Onboard Traffic Embedded Roaming Sensors (VOTERS) project provides a framework and the sensing capability to complement periodical localized inspections to continuous network-wide health monitoring. Research focused on the development of a cost-effective, lightweight package of multi-modal sensor systems compatible with this framework. An innovative software infrastructure is created that collects, processes, and evaluates these large time-lapse multi-modal data streams. A GIS-based control center manages multiple inspection vehicles and the data for further analysis, visualization, and decision making. VOTERS' technology can monitor road conditions at both the surface and sub-surface levels while the vehicle is navigating through daily traffic going about its normal business, thereby allowing for network-wide frequent assessment of roadways. This deterioration process monitoring at unprecedented time and spatial scales provides unique experimental data that can be used to improve life-cycle cost analysis models.

  18. Steroid Avoidance in Pediatric Heart Transplantation Results in Excellent Graft Survival

    PubMed Central

    Auerbach, Scott R.; Gralla, Jane; Campbell, David N.; Miyamoto, Shelley D.; Pietra, Biagio A.

    2018-01-01

    Background Maintenance steroid (MS) use in pediatric heart transplantation (HT) varies across centers. The purpose of this study was to evaluate the impact of steroid-free maintenance immunosuppression (SF) on graft outcomes in pediatric HT. Methods Patients younger than 18 years in the United States undergoing a first HT during 1990 to 2010 were analyzed for conditional 30-day graft loss (death or repeat HT) and death based on MS use by multivariable analysis. A propensity score was then given to each patient using a logistic model, and propensity matching was performed using pre-HT risk factors, induction therapy, and nonsteroid maintenance immunosuppression. Kaplan-Meier graft and patient survival probabilities by MS use were then calculated. Results Of 4894 patients, 3962 (81%) were taking MS and 932 (19%) SF. Of the 4530 alive at 30 days after HT, 3694 (82%) and 836 (18%) were in the MS and SF groups, respectively. Unmatched multivariable analysis showed no difference in 30-day conditional graft survival between MS and SF groups (hazard ratio=1.08, 95% confidence interval=0.93-1.24; P=0.33). Propensity matching resulted in 462 patients in each MS and SF group. Propensity-matched Kaplan-Meier survival analysis showed no difference in graft or patient survival between groups (P=0.3 and P=0.16, respectively). Conclusions We found no difference in graft survival between SF patients and those taking MS. An SF regimen in pediatric HT avoids potential complications of steroid use without compromising graft survival, even after accounting for pre-HT risk factors. PMID:24389908

  19. A method for accounting for maintenance costs in flux balance analysis improves the prediction of plant cell metabolic phenotypes under stress conditions.

    PubMed

    Cheung, C Y Maurice; Williams, Thomas C R; Poolman, Mark G; Fell, David A; Ratcliffe, R George; Sweetlove, Lee J

    2013-09-01

    Flux balance models of metabolism generally utilize synthesis of biomass as the main determinant of intracellular fluxes. However, the biomass constraint alone is not sufficient to predict realistic fluxes in central heterotrophic metabolism of plant cells because of the major demand on the energy budget due to transport costs and cell maintenance. This major limitation can be addressed by incorporating transport steps into the metabolic model and by implementing a procedure that uses Pareto optimality analysis to explore the trade-off between ATP and NADPH production for maintenance. This leads to a method for predicting cell maintenance costs on the basis of the measured flux ratio between the oxidative steps of the oxidative pentose phosphate pathway and glycolysis. We show that accounting for transport and maintenance costs substantially improves the accuracy of fluxes predicted from a flux balance model of heterotrophic Arabidopsis cells in culture, irrespective of the objective function used in the analysis. Moreover, when the new method was applied to cells under control, elevated temperature and hyper-osmotic conditions, only elevated temperature led to a substantial increase in cell maintenance costs. It is concluded that the hyper-osmotic conditions tested did not impose a metabolic stress, in as much as the metabolic network is not forced to devote more resources to cell maintenance. © 2013 The Authors The Plant Journal © 2013 John Wiley & Sons Ltd.

  20. Community Involvement as an Effective Institutional Control at the Weldon Spring Site, a U.S. Department of Energy Office of Legacy Management Site

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deyo, Y.E.; Pauling, T.

    2006-07-01

    The U.S. Department of Energy (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) was conducted for the purpose of remediating a portion of a former trinitrotoluene and dinitrotoluene production plant that was operational from 1941 to 1945 and a former uranium refinery that was operational from 1957 to 1966. Surface remediation activities concluded in 2001 with the completion of a 45-acre (.18 square kilometer) on-site engineered disposal facility. Long-term surveillance and maintenance activities at the site were officially transferred to the DOE Office of Legacy Management in 2003. The Weldon Spring Site is located within the St. Louis, Missouri, metropolitanmore » area (population 3 million). DOE's close relationship with surrounding land owners created a need for innovative solutions to long-term surveillance and maintenance issues at the site. Through a Secretarial proclamation, a plan was established for development of a comprehensive public involvement and education program. This program would act as an institutional control to communicate the historical legacy of the site and would make information available about contamination present at the site to guide people in making decisions about appropriate site activities. In August 2002, the Weldon Spring Site Interpretive Center opened to the public with exhibits about the history of the area, the remediation work that was completed, and a site information repository that is available to visitors. In addition, the Hamburg Trail for hiking and biking was constructed as a joint DOE/MDC effort. The 8-mile trail travels through both DOE and MDC property; a series of historical markers posted along its length to communicate the history of the area and the remediation work that was done as part of WSSRAP activities. A ramp and viewing platform with informational plaques were constructed on the disposal cell to provide an additional mechanism for public education. With a basic marketing program, site visitor-ship has been steadily increasing. In 2005, approximately 15,400 visitors were associated with Interpretive Center operations and outreach activities. Science-oriented educational programs that directly relate to past remediation activities and present long-term surveillance and maintenance issues have been developed and are presented to St. Louis area school groups and other community-based organizations. Other innovative programs have been developed to address daily maintenance issues at the site and to promote beneficial community re-use of the property. Approximately 30,000 square feet of the former Administration Building has been transferred through a use-permit to Lindenwood University, a local institution with a total enrollment of about 12,000 students. Lindenwood is establishing a satellite college campus in the building in exchange for providing basic maintenance and payment of utilities for both the Administration Building and Interpretive Center. A volunteer program developed to address maintenance of the native plant gardens that surround the Interpretive Center has a current enrollment of approximately 25 volunteers. Another volunteer group of prairie ecosystem experts has been meeting regularly for the last 3 years to assist the site in long-term management of the established prairie surrounding the disposal cell. Public support of these community involvement activities at the site is strong. DOE has worked closely with the Weldon Spring Citizens Commission in developing the concepts for this approach and the Commission has helped promote these activities within the community. It is expected that continued public education in this manner will only serve to strengthen the institutional control commitments at the Weldon Spring Site. (authors)« less

  1. A pilot study of the nutritional status of opiate-using pregnant women on methadone maintenance therapy.

    PubMed

    Tomedi, Laura Elizabeth; Bogen, Debra L; Hanusa, Barbara H; Wisner, Katherine L; Bodnar, Lisa M

    2012-02-01

    Pregnant women in methadone maintenance therapy may have poor nutrition during pregnancy. In 2006-2008, methadone-treated pregnant women (n = 22) were recruited at an urban academic medical center and compared with nondrug-using pregnant women (n = 119) at 20-35 weeks' gestation. We measured adiposity using prepregnancy body mass index (BMI), dietary intake using a food frequency questionnaire, and micronutrient and essential fatty acid status using biomarkers. Methadone-treated women had lower BMI, consumed more calories, had lower serum carotenoid concentrations, and higher plasma homocysteine concentrations than controls. The study's limitations and implications for future research are discussed.

  2. Indentured Parts List Maintenance and Part Assembly Capture Tool - IMPACT

    NASA Technical Reports Server (NTRS)

    Jain, Bobby; Morris, Jill; Sharpe, Kelly

    2004-01-01

    Johnson Space Center's (JSC's) indentured parts list (IPL) maintenance and parts assembly capture tool (IMPACT) is an easy-to-use graphical interface for viewing and maintaining the complex assembly hierarchies of large databases. IMPACT, already in use at JSC to support the International Space Station (ISS), queries, updates, modifies, and views data in IPL and associated resource data, functions that it can also perform, with modification, for any large commercial database. By enabling its users to efficiently view and manipulate IPL hierarchical data, IMPACT performs a function unlike that of any other tool. Through IMPACT, users will achieve results quickly, efficiently, and cost effectively.

  3. Manned geosynchronous mission requirements and systems analysis study extension

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Turnaround requirements for the manned orbital transfer vehicle (MOTV) baseline and alternate concepts with and without a space operations center (SOC) are defined. Manned orbital transfer vehicle maintenance, refurbishment, resupply, and refueling are considered as well as the most effective combination of ground based and space based turnaround activities. Ground and flight operations requirements for abort are identified as well as low cost approaches to space and ground operations through maintenance and missions sensitivity studies. The recommended turnaround mix shows that space basing MOTV at SOC with periodic return to ground for overhaul results in minimum recurring costs. A pressurized hangar at SOC reduces labor costs by approximately 50%.

  4. KENNEDY SPACE CENTER, FLA. - Carrying a set of twin solid rocket boosters, the crawler transporter slowly moves the Mobile Launcher Platform (MLP) past the NASA-KSC News Center where the U.S. flag flies daily. The journey is in support of engineering analysis vibration tests on the crawler and MLP. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

    NASA Image and Video Library

    2003-11-17

    KENNEDY SPACE CENTER, FLA. - Carrying a set of twin solid rocket boosters, the crawler transporter slowly moves the Mobile Launcher Platform (MLP) past the NASA-KSC News Center where the U.S. flag flies daily. The journey is in support of engineering analysis vibration tests on the crawler and MLP. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

  5. Maintenance of Austral Summertime Upper-Tropospheric Circulation over Tropical South America: The Bolivian High-Nordeste Low System.

    NASA Astrophysics Data System (ADS)

    Chen, Tsing-Chang; Weng, Shu-Ping; Schubert, Siegfried

    1999-07-01

    Using the NASA/GEOS reanalysis data for 1980-95, the austral-summer stationary eddies in the tropical-subtropical Southern Hemisphere are examined in two wave regimes: long and short wave (wave 1 and waves 2-6, respectively). The basic structure of the Bolivian high-Nordeste low (BH-NL) system is formed by a short-wave train across South America but modulated by the long-wave regime. The short-wave train exhibits a monsoonlike vertical phase reversal in the midtroposphere and a quarter-wave phase shift relative to the divergent circulation. As inferred from (a) the spatial relationship between the streamfunction and velocity potential and (b) the structure of the divergent circulation, the short-wave train forming the BH-NL system is maintained by South American local heating and remote African heating, while the long-wave regime is maintained by western tropical Pacific heating.The maintenance of the stationary waves in the two wave regimes is further illustrated by a simple diagnostic scheme that includes the velocity-potential maintenance equation (which links velocity potential and diabatic heating) and the streamfunction budget (which is the inverse Laplacian transform of the vorticity equation). Some simple relationships between streamfunction and velocity potential for both wave regimes are established to substantiate the links between diabatic heating and streamfunction; of particular interest is a Sverdrup balance in the short-wave regime. This simplified vorticity equation explains the vertical structure of the short-wave train associated with the BH-NL system and its spatial relationship with the divergent circulation.Based upon the diagnostic analysis of its maintenance a simple forced barotropic model is adopted to simulate the BH-NL system with idealized forcings, which imitates the real 200-mb divergence centers over South America, Africa, and the tropical Pacific. Numerical simulations demonstrate that the formation of the BH-NL system is affected not only by the African remote forcing, but also by the tropical Pacific forcing.

  6. Stockpile Model of Personal Protective Equipment in Taiwan.

    PubMed

    Chen, Yu-Ju; Chiang, Po-Jung; Cheng, Yu-Hsin; Huang, Chun-Wei; Kao, Hui-Yun; Chang, Chih-Kai; Huang, Hsun-Miao; Liu, Pei-Yin; Wang, Jen-Hsin; Chih, Yi-Chien; Chou, Shu-Mei; Yang, Chin-Hui; Chen, Chang-Hsun

    The Taiwan Centers for Disease Control (Taiwan CDC) has established a 3-tier personal protective equipment (PPE) stockpiling framework that could maintain a minimum stockpile for the surge demand of PPE in the early stage of a pandemic. However, PPE stockpiling efforts must contend with increasing storage fees and expiration problems. In 2011, the Taiwan CDC initiated a stockpile replacement model in order to optimize the PPE stockpiling efficiency, ensure a minimum stockpile, use the government's limited funds more effectively, and achieve the goal of sustainable management. This stockpile replacement model employs a first-in-first-out principle in which the oldest stock in the central government stockpile is regularly replaced and replenished with the same amount of new and qualified products, ensuring the availability and maintenance of the minimum stockpiles. In addition, a joint electronic procurement platform has been established for merchandising the replaced PPE to local health authorities and medical and other institutions for their routine or epidemic use. In this article, we describe the PPE stockpile model in Taiwan, including the 3-tier stockpiling framework, the operational model, the components of the replacement system, implementation outcomes, epidemic supports, and the challenges and prospects of this model.

  7. Stockpile Model of Personal Protective Equipment in Taiwan

    PubMed Central

    Chen, Yu-Ju; Cheng, Yu-Hsin; Huang, Chun-Wei; Kao, Hui-Yun; Chang, Chih-Kai; Huang, Hsun-Miao; Liu, Pei-Yin; Wang, Jen-Hsin; Chih, Yi-Chien; Chou, Shu-Mei; Yang, Chin-Hui; Chen, Chang-Hsun

    2017-01-01

    The Taiwan Centers for Disease Control (Taiwan CDC) has established a 3-tier personal protective equipment (PPE) stockpiling framework that could maintain a minimum stockpile for the surge demand of PPE in the early stage of a pandemic. However, PPE stockpiling efforts must contend with increasing storage fees and expiration problems. In 2011, the Taiwan CDC initiated a stockpile replacement model in order to optimize the PPE stockpiling efficiency, ensure a minimum stockpile, use the government's limited funds more effectively, and achieve the goal of sustainable management. This stockpile replacement model employs a first-in-first-out principle in which the oldest stock in the central government stockpile is regularly replaced and replenished with the same amount of new and qualified products, ensuring the availability and maintenance of the minimum stockpiles. In addition, a joint electronic procurement platform has been established for merchandising the replaced PPE to local health authorities and medical and other institutions for their routine or epidemic use. In this article, we describe the PPE stockpile model in Taiwan, including the 3-tier stockpiling framework, the operational model, the components of the replacement system, implementation outcomes, epidemic supports, and the challenges and prospects of this model. PMID:28418743

  8. A performance improvement case study in aircraft maintenance and its implications for hazard identification.

    PubMed

    Ward, Marie; McDonald, Nick; Morrison, Rabea; Gaynor, Des; Nugent, Tony

    2010-02-01

    Aircraft maintenance is a highly regulated, safety critical, complex and competitive industry. There is a need to develop innovative solutions to address process efficiency without compromising safety and quality. This paper presents the case that in order to improve a highly complex system such as aircraft maintenance, it is necessary to develop a comprehensive and ecologically valid model of the operational system, which represents not just what is meant to happen, but what normally happens. This model then provides the backdrop against which to change or improve the system. A performance report, the Blocker Report, specific to aircraft maintenance and related to the model was developed gathering data on anything that 'blocks' task or check performance. A Blocker Resolution Process was designed to resolve blockers and improve the current check system. Significant results were obtained for the company in the first trial and implications for safety management systems and hazard identification are discussed. Statement of Relevance: Aircraft maintenance is a safety critical, complex, competitive industry with a need to develop innovative solutions to address process and safety efficiency. This research addresses this through the development of a comprehensive and ecologically valid model of the system linked with a performance reporting and resolution system.

  9. Lineage Selection and the Maintenance of Sex.

    PubMed

    de Vienne, Damien M; Giraud, Tatiana; Gouyon, Pierre-Henri

    2013-01-01

    Sex predominates in eukaryotes, despite its short-term disadvantage when compared to asexuality. Myriad models have suggested that short-term advantages of sex may be sufficient to counterbalance its twofold costs. However, despite decades of experimental work seeking such evidence, no evolutionary mechanism has yet achieved broad recognition as explanation for the maintenance of sex. We explore here, through lineage-selection models, the conditions favouring the maintenance of sex. In the first model, we allowed the rate of transition to asexuality to evolve, to determine whether lineage selection favoured species with the strongest constraints preventing the loss of sex. In the second model, we simulated more explicitly the mechanisms underlying the higher extinction rates of asexual lineages than of their sexual counterparts. We linked extinction rates to the ecological and/or genetic features of lineages, thereby providing a formalisation of the only figure included in Darwin's "The origin of species". Our results reinforce the view that the long-term advantages of sex and lineage selection may provide the most satisfactory explanations for the maintenance of sex in eukaryotes, which is still poorly recognized, and provide figures and a simulation website for training and educational purposes. Short-term benefits may play a role, but it is also essential to take into account the selection of lineages for a thorough understanding of the maintenance of sex.

  10. 76 FR 43906 - Approval and Promulgation of State Implementation Plan Revisions; Infrastructure Requirements for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-22

    ... emissions inventories, monitoring, and modeling, to assure attainment and maintenance of the standards... NAAQS required the deployment of a system of new monitors to measure ambient levels of that new... requirements, including emissions inventories, monitoring, and modeling to assure attainment and maintenance of...

  11. Two Maintenance Mechanisms of Verbal Information in Working Memory

    ERIC Educational Resources Information Center

    Camos, V.; Lagner, P.; Barrouillet, P.

    2009-01-01

    The present study evaluated the interplay between two mechanisms of maintenance of verbal information in working memory, namely articulatory rehearsal as described in Baddeley's model, and attentional refreshing as postulated in Barrouillet and Camos's Time-Based Resource-Sharing (TBRS) model. In four experiments using complex span paradigm, we…

  12. Automotive Maintenance Data Base for Model Years 1976-1979. Part II : Appendix E and F

    DOT National Transportation Integrated Search

    1980-12-01

    An update of the existing data base was developed to include life cycle maintenance costs of representative vehicles for the model years 1976-1979. Repair costs as a function of time are also developed for a passenger car in each of the compact, subc...

  13. Study design and protocol for a theory-based behavioral intervention focusing on maintenance of weight loss: the Maintenance After Initiation of Nutrition TrAINing (MAINTAIN) study.

    PubMed

    Voils, Corrine I; Gierisch, Jennifer M; Olsen, Maren K; Maciejewski, Matthew L; Grubber, Janet; McVay, Megan A; Strauss, Jennifer L; Bolton, Jamiyla; Gaillard, Leslie; Strawbridge, Elizabeth; Yancy, William S

    2014-09-01

    Obesity is a significant public health problem. Although various lifestyle approaches are effective for inducing significant weight loss, few effective behavioral weight maintenance strategies have been identified. It has been proposed that behavior maintenance is a distinct state that involves different psychological processes and behavioral skills than initial behavior change. Previously, we created a conceptual model that distinguishes behavior initiation from maintenance. This model was used to generate Maintenance After Initiation of Nutrition TrAINing (MAINTAIN), an intervention to enhance weight loss maintenance following initiation. The effectiveness of MAINTAIN is being evaluated in an ongoing trial, the rationale and procedures of which are reported herein. Veterans aged ≤ 75 with body mass index ≥ 30 kg/m(2) participate in a 16-week, group-based weight loss program. Participants who lose ≥ 4 kg by the end of 16 weeks (target n = 230) are randomized 1:1 to receive (a) usual care for 56 weeks or (b) MAINTAIN, a theoretically-informed weight loss maintenance intervention for 40 weeks, followed by 16 weeks of no intervention contact. MAINTAIN involves 3 in-person group visits that transition to 8 individualized telephone calls with decreasing contact frequency. MAINTAIN focuses on satisfaction with outcomes, weight self-monitoring, relapse prevention, and social support. We hypothesize that, compared to usual care, MAINTAIN will result in at least 3.5 kg less regain and better relative levels of caloric intake and physical activity over 56 weeks, and that it will be cost-effective. If effective, MAINTAIN could serve as a model for redesigning existing weight loss programs. NCT01357551. Published by Elsevier Inc.

  14. Institutional shared resources and translational cancer research.

    PubMed

    De Paoli, Paolo

    2009-06-29

    The development and maintenance of adequate shared infrastructures is considered a major goal for academic centers promoting translational research programs. Among infrastructures favoring translational research, centralized facilities characterized by shared, multidisciplinary use of expensive laboratory instrumentation, or by complex computer hardware and software and/or by high professional skills are necessary to maintain or improve institutional scientific competitiveness. The success or failure of a shared resource program also depends on the choice of appropriate institutional policies and requires an effective institutional governance regarding decisions on staffing, existence and composition of advisory committees, policies and of defined mechanisms of reporting, budgeting and financial support of each resource. Shared Resources represent a widely diffused model to sustain cancer research; in fact, web sites from an impressive number of research Institutes and Universities in the U.S. contain pages dedicated to the SR that have been established in each Center, making a complete view of the situation impossible. However, a nation-wide overview of how Cancer Centers develop SR programs is available on the web site for NCI-designated Cancer Centers in the U.S., while in Europe, information is available for individual Cancer centers. This article will briefly summarize the institutional policies, the organizational needs, the characteristics, scientific aims, and future developments of SRs necessary to develop effective translational research programs in oncology.In fact, the physical build-up of SRs per se is not sufficient for the successful translation of biomedical research. Appropriate policies to improve the academic culture in collaboration, the availability of educational programs for translational investigators, the existence of administrative facilitations for translational research and an efficient organization supporting clinical trial recruitment and management represent essential tools, providing solutions to overcome existing barriers in the development of translational research in biomedical research centers.

  15. Institutional shared resources and translational cancer research

    PubMed Central

    De Paoli, Paolo

    2009-01-01

    The development and maintenance of adequate shared infrastructures is considered a major goal for academic centers promoting translational research programs. Among infrastructures favoring translational research, centralized facilities characterized by shared, multidisciplinary use of expensive laboratory instrumentation, or by complex computer hardware and software and/or by high professional skills are necessary to maintain or improve institutional scientific competitiveness. The success or failure of a shared resource program also depends on the choice of appropriate institutional policies and requires an effective institutional governance regarding decisions on staffing, existence and composition of advisory committees, policies and of defined mechanisms of reporting, budgeting and financial support of each resource. Shared Resources represent a widely diffused model to sustain cancer research; in fact, web sites from an impressive number of research Institutes and Universities in the U.S. contain pages dedicated to the SR that have been established in each Center, making a complete view of the situation impossible. However, a nation-wide overview of how Cancer Centers develop SR programs is available on the web site for NCI-designated Cancer Centers in the U.S., while in Europe, information is available for individual Cancer centers. This article will briefly summarize the institutional policies, the organizational needs, the characteristics, scientific aims, and future developments of SRs necessary to develop effective translational research programs in oncology. In fact, the physical build-up of SRs per se is not sufficient for the successful translation of biomedical research. Appropriate policies to improve the academic culture in collaboration, the availability of educational programs for translational investigators, the existence of administrative facilitations for translational research and an efficient organization supporting clinical trial recruitment and management represent essential tools, providing solutions to overcome existing barriers in the development of translational research in biomedical research centers. PMID:19563639

  16. Characteristics of the Healthy Brain Project Sample: Representing Diversity among Study Participants

    ERIC Educational Resources Information Center

    Bryant, Lucinda L.; Laditka, James N.; Laditka, Sarah B.; Mathews, Anna E.

    2009-01-01

    Purpose: Description of study participants and documentation of the desired diversity in the Prevention Research Centers Healthy Aging Research Network's Workgroup on Promoting Cognitive Health large multisite study designed to examine attitudes about brain health, behaviors associated with its maintenance, and information-receiving preferences…

  17. 77 FR 33729 - Disability and Rehabilitation Research Projects and Centers Program-National Data and Statistical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-07

    ... statistical and other methodological consultation to this collaborative project. Discussion: Grantees under... and technical assistance must be designed to contribute to the following outcomes: (a) Maintenance of... methodological consultation available for research projects that use the BMS Database, as well as site- specific...

  18. 42 CFR 415.130 - Conditions for payment: Physician pathology services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-inclusive care for the elderly (PACE) under 1894 of the Act; or (iv) A social health maintenance... 42 Public Health 3 2010-10-01 2010-10-01 false Conditions for payment: Physician pathology services. 415.130 Section 415.130 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF...

  19. Procedures Handbook for Elementary School IMC Clerks. Revised.

    ERIC Educational Resources Information Center

    Allen, Christine

    This training manual describes and explains the variety of tasks performed by library clerks in the Riverside (California) Unified School District's elementary school instructional media centers (IMCs). It is noted that the job responsibilities of these clerks fall into four areas with specific duties relating to each: maintenance of the…

  20. 48 CFR 204.7204 - Maintenance of the CAGE file.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) Submit requests for changes to CAGE files on DD Form 2051, or electronic equivalent, to—Defense Logistics Information Service, DLIS-SBB, Federal Center, 74 Washington Avenue, North, Battle Creek, MI 49017-3084... codes is in Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual...

Top