The role of external features in face recognition with central vision loss: A pilot study

PubMed Central

Bernard, Jean-Baptiste; Chung, Susana T.L.

2016-01-01

Purpose We evaluated how the performance for recognizing familiar face images depends on the internal (eyebrows, eyes, nose, mouth) and external face features (chin, outline of face, hairline) in individuals with central vision loss. Methods In Experiment 1, we measured eye movements for four observers with central vision loss to determine whether they fixated more often on the internal or the external features of face images while attempting to recognize the images. We then measured the accuracy for recognizing face images that contained only the internal, only the external, or both internal and external features (Experiment 2), and for hybrid images where the internal and external features came from two different source images (Experiment 3), for five observers with central vision loss and four age-matched control observers. Results When recognizing familiar face images, approximately 40% of the fixations of observers with central vision loss were centered on the external features of faces. The recognition accuracy was higher for images containing only external features (66.8±3.3% correct) than for images containing only internal features (35.8±15.0%), a finding contradicting that of control observers. For hybrid face images, observers with central vision loss responded more accurately to the external features (50.4±17.8%) than to the internal features (9.3±4.9%), while control observers did not show the same bias toward responding to the external features. Conclusions Contrary to people with normal vision who rely more on the internal features of face images for recognizing familiar faces, individuals with central vision loss show a higher dependence on using external features of face images. PMID:26829260

The Role of External Features in Face Recognition with Central Vision Loss.

PubMed

Bernard, Jean-Baptiste; Chung, Susana T L

2016-05-01

We evaluated how the performance of recognizing familiar face images depends on the internal (eyebrows, eyes, nose, mouth) and external face features (chin, outline of face, hairline) in individuals with central vision loss. In experiment 1, we measured eye movements for four observers with central vision loss to determine whether they fixated more often on the internal or the external features of face images while attempting to recognize the images. We then measured the accuracy for recognizing face images that contained only the internal, only the external, or both internal and external features (experiment 2) and for hybrid images where the internal and external features came from two different source images (experiment 3) for five observers with central vision loss and four age-matched control observers. When recognizing familiar face images, approximately 40% of the fixations of observers with central vision loss was centered on the external features of faces. The recognition accuracy was higher for images containing only external features (66.8 ± 3.3% correct) than for images containing only internal features (35.8 ± 15.0%), a finding contradicting that of control observers. For hybrid face images, observers with central vision loss responded more accurately to the external features (50.4 ± 17.8%) than to the internal features (9.3 ± 4.9%), whereas control observers did not show the same bias toward responding to the external features. Contrary to people with normal vision who rely more on the internal features of face images for recognizing familiar faces, individuals with central vision loss show a higher dependence on using external features of face images.

Modulation of the composite face effect by unintended emotion cues.

PubMed

Gray, Katie L H; Murphy, Jennifer; Marsh, Jade E; Cook, Richard

2017-04-01

When upper and lower regions from different emotionless faces are aligned to form a facial composite, observers 'fuse' the two halves together, perceptually. The illusory distortion induced by task-irrelevant ('distractor') halves hinders participants' judgements about task-relevant ('target') halves. This composite-face effect reveals a tendency to integrate feature information from disparate regions of intact upright faces, consistent with theories of holistic face processing. However, observers frequently perceive emotion in ostensibly neutral faces, contrary to the intentions of experimenters. This study sought to determine whether this 'perceived emotion' influences the composite-face effect. In our first experiment, we confirmed that the composite effect grows stronger as the strength of distractor emotion increased. Critically, effects of distractor emotion were induced by weak emotion intensities, and were incidental insofar as emotion cues hindered image matching, not emotion labelling per se . In Experiment 2, we found a correlation between the presence of perceived emotion in a set of ostensibly neutral distractor regions sourced from commonly used face databases, and the strength of illusory distortion they induced. In Experiment 3, participants completed a sequential matching composite task in which half of the distractor regions were rated high and low for perceived emotion, respectively. Significantly stronger composite effects were induced by the high-emotion distractor halves. These convergent results suggest that perceived emotion increases the strength of the composite-face effect induced by supposedly emotionless faces. These findings have important implications for the study of holistic face processing in typical and atypical populations.

The role of the amygdala and the basal ganglia in visual processing of central vs. peripheral emotional content.

PubMed

Almeida, Inês; van Asselen, Marieke; Castelo-Branco, Miguel

2013-09-01

In human cognition, most relevant stimuli, such as faces, are processed in central vision. However, it is widely believed that recognition of relevant stimuli (e.g. threatening animal faces) at peripheral locations is also important due to their survival value. Moreover, task instructions have been shown to modulate brain regions involved in threat recognition (e.g. the amygdala). In this respect it is also controversial whether tasks requiring explicit focus on stimulus threat content vs. implicit processing differently engage primitive subcortical structures involved in emotional appraisal. Here we have addressed the role of central vs. peripheral processing in the human amygdala using animal threatening vs. non-threatening face stimuli. First, a simple animal face recognition task with threatening and non-threatening animal faces, as well as non-face control stimuli, was employed in naïve subjects (implicit task). A subsequent task was then performed with the same stimulus categories (but different stimuli) in which subjects were told to explicitly detect threat signals. We found lateralized amygdala responses both to the spatial location of stimuli and to the threatening content of faces depending on the task performed: the right amygdala showed increased responses to central compared to left presented stimuli specifically during the threat detection task, while the left amygdala was better prone to discriminate threatening faces from non-facial displays during the animal face recognition task. Additionally, the right amygdala responded to faces during the threat detection task but only when centrally presented. Moreover, we have found no evidence for superior responses of the amygdala to peripheral stimuli. Importantly, we have found that striatal regions activate differentially depending on peripheral vs. central processing of threatening faces. Accordingly, peripheral processing of these stimuli activated more strongly the putaminal region, while central processing engaged mainly the caudate nucleus. We conclude that the human amygdala has a central bias for face stimuli, and that visual processing recruits different striatal regions, putaminal or caudate based, depending on the task and on whether peripheral or central visual processing is involved. © 2013 Elsevier Ltd. All rights reserved.

A regional composite-face effect for species-specific recognition: Upper and lower halves play different roles in holistic processing of monkey faces.

PubMed

Wang, Zhe; Quinn, Paul C; Jin, Haiyang; Sun, Yu-Hao P; Tanaka, James W; Pascalis, Olivier; Lee, Kang

2018-04-25

Using a composite-face paradigm, we examined the holistic processing induced by Asian faces, Caucasian faces, and monkey faces with human Asian participants in two experiments. In Experiment 1, participants were asked to judge whether the upper halves of two faces successively presented were the same or different. A composite-face effect was found for Asian faces and Caucasian faces, but not for monkey faces. In Experiment 2, participants were asked to judge whether the lower halves of the two faces successively presented were the same or different. A composite-face effect was found for monkey faces as well as for Asian faces and Caucasian faces. Collectively, these results reveal that own-species (i.e., own-race and other-race) faces engage holistic processing in both upper and lower halves of the face, but other-species (i.e., monkey) faces engage holistic processing only when participants are asked to match the lower halves of the face. The findings are discussed in the context of a region-based holistic processing account for the species-specific effect in face recognition. Copyright © 2018 Elsevier Ltd. All rights reserved.

Interaction between Social Categories in the Composite Face Paradigm

ERIC Educational Resources Information Center

Chen, Wenfeng; Ren, Naixin; Young, Andrew W.; Liu, Chang Hong

2018-01-01

The composite face paradigm (Young, Hellawell, & Hay, 1987) is widely used to demonstrate holistic perception of faces (Rossion, 2013). In the paradigm, parts from different faces (usually the top and bottom halves) are recombined. The principal criterion for holistic perception is that responses involving the component parts of composites in…

Composite Faces Are Not (Necessarily) Processed Coactively: A Test Using Systems Factorial Technology and Logical-Rule Models

ERIC Educational Resources Information Center

Cheng, Xue Jun; McCarthy, Callum J.; Wang, Tony S. L.; Palmeri, Thomas J.; Little, Daniel R.

2018-01-01

Upright faces are thought to be processed more holistically than inverted faces. In the widely used composite face paradigm, holistic processing is inferred from interference in recognition performance from a to-be-ignored face half for upright and aligned faces compared with inverted or misaligned faces. We sought to characterize the nature of…

From development to aging: Holistic face perception in children, younger and older adults.

PubMed

Meinhardt-Injac, Bozana; Boutet, Isabelle; Persike, Malte; Meinhardt, Günter; Imhof, Margarete

2017-01-01

Few published reports examine the development of holistic face processing across the lifespan such that face-specific processes are adequately differentiated from general developmental effects. To address this gap in the literature, we used the complete design of the composite paradigm (Richler & Gauthier, 2014) with faces and non-face control objects (watches) to investigate holistic processing in children (8-10years), young adults (20-32years) and older adults (65-78years). Several modifications to past research designs were introduced to improve the ability to draw conclusions about the development of holistic processing in terms of face-specificity, response bias, and age-related differences in attention. Attentional focus (narrow vs. wide focus at study) influenced the magnitude of the composite effect without eliminating holistic face processing in all age groups. Young adults showed large composite effects for faces, but none for watches. In contrast, older adults and children showed composite effects for both faces and watches, although the effects for faces were larger. Our findings suggest that holistic processing, as measured by the composite effect, might be moderated by less efficient attentional control in children and older adults. The study also underscores the importance of including comparable complex objects when investigating face processing across the lifespan. Copyright © 2016 Elsevier B.V. All rights reserved.

Configural information in gender categorisation.

PubMed

Baudouin, Jean-Yves; Humphreys, Glyn W

2006-01-01

The role of configural information in gender categorisation was studied by aligning the top half of one face with the bottom half of another. The two faces had the same or different genders. Experiment 1 shows that participants were slower and made more errors in categorising the gender in either half of these composite faces when the two faces had a different gender, relative to control conditions where the two faces were nonaligned or had the same gender. This result parallels the composite effect for face recognition (Young et al, 1987 Perception 16 747-759) and facial-expression recognition (Calder et al, 2000 Journal of Experimental Psychology: Human Perception and Performance 26 527-551). Similarly to responses to face identity and expression, the composite effect on gender discrimination was disrupted by inverting the faces (experiment 2). Both experiments also show that the composite paradigm is sensitive to general contextual interference in gender categorisation.

Effect of surface treatments on the bond strengths of facing composite resins to zirconia copings.

PubMed

Tsumita, M; Kokubo, Y; Kano, T

2012-09-01

The present study evaluated and compared the bond strength between zirconia and facing composite resin using different surface conditioning methods before and after thermocycling. Four primers, three opaque resins, and two facing composite resins were used, and 10 surface treatment procedures were conducted. The bond strength was measured before and after 4,000 cycles of thermocycling. The mean values of each group were statistically analyzed using one-way analysis of variance (ANOVA). The bond strengths of facing composite resins to zirconia after various treatments varied depending on the primers, opaque resins, body resins, and thermocycling. The application of primers and opaque resins to the zirconia surface after sandblasting is expected to yield strong bond strength of the facing composite resin (Estenia CG&B) even after thermocycling.

A clinical study to evaluate the correlation between maxillary central incisor tooth form and face form in an Indian population.

PubMed

Koralakunte, Pavankumar R; Budihal, Dhanyakumar H

2012-09-01

A study was performed to examine the correlation between maxillary central incisor tooth form and face form in males and females in an Indian population. The selection of prosthetic teeth for edentulous patients is a primary issue in denture esthetics, especially in the case of maxillary central incisors, which are the most prominent teeth in the arch. Two hundred dental students of Indian origin comprising 79 males and 121 females aged 18-28 years studying at Bapuji Dental College and Hospital were randomly selected as the study subjects. A standardized photographic procedure was used to obtain images of the face and the maxillary central incisors. The outline forms of the face and the maxillary right central incisor tooth were determined using a standardized method. The outline forms obtained were used to classify both face form and tooth form on the basis of visual and William's methods. The means were considered after evaluation by five prosthodontists, and the results were tabulated. Statistical analysis was performed using the chi-squared test for association and Z-test for equality of proportions. A correlation greater than 50% was observed between tooth form and face form by the visual method, compared with one of 31.5% by William's method. There was no highly defined correlation between maxillary central incisor tooth form and face form among the male and female Indian subjects studied.

Differences between perception of human faces and body shapes: evidence from the composite illusion.

PubMed

Soria Bauser, Denise A; Suchan, Boris; Daum, Irene

2011-01-01

The present study aimed to investigate whether human body forms--like human faces--undergo holistic processing. Evidence for holistic face processing comes from the face composite effect: two identical top halves of a face are perceived as being different if they are presented with different bottom parts. This effect disappears if both bottom halves are shifted laterally (misaligned) or if the stimulus is rotated by 180°. We investigated whether comparable composite effects are observed for human faces and human body forms. Matching of upright faces was more accurate and faster for misaligned compared to aligned presentations. By contrast, there were no processing differences between aligned and misaligned bodies. An inversion effect emerged, with better recognition performance for upright compared to inverted bodies but not faces. The present findings provide evidence for the assumption that holistic processing--investigated with the composite illusion--is not involved in the perception of human body forms. Copyright © 2010 Elsevier Ltd. All rights reserved.

Holistic processing of human body postures: evidence from the composite effect.

PubMed

Willems, Sam; Vrancken, Leia; Germeys, Filip; Verfaillie, Karl

2014-01-01

The perception of socially relevant stimuli (e.g., faces and bodies) has received considerable attention in the vision science community. It is now widely accepted that human faces are processed holistically and not only analytically. One observation that has been taken as evidence for holistic face processing is the face composite effect: two identical top halves of a face tend to be perceived as being different when combined with different bottom halves. This supports the hypothesis that face processing proceeds holistically. Indeed, the interference effect disappears when the two face parts are misaligned (blocking holistic perception). In the present study, we investigated whether there is also a composite effect for the perception of body postures: are two identical body halves perceived as being in different poses when the irrelevant body halves differ from each other? Both a horizontal (i.e., top-bottom body halves; Experiment 1) and a vertical composite effect (i.e., left-right body halves; Experiment 2) were examined by means of a delayed matching-to-sample task. Results of both experiments indicate the existence of a body posture composite effect. This provides evidence for the hypothesis that body postures, as faces, are processed holistically.

Holistic processing of human body postures: evidence from the composite effect

PubMed Central

Willems, Sam; Vrancken, Leia; Germeys, Filip; Verfaillie, Karl

2014-01-01

The perception of socially relevant stimuli (e.g., faces and bodies) has received considerable attention in the vision science community. It is now widely accepted that human faces are processed holistically and not only analytically. One observation that has been taken as evidence for holistic face processing is the face composite effect: two identical top halves of a face tend to be perceived as being different when combined with different bottom halves. This supports the hypothesis that face processing proceeds holistically. Indeed, the interference effect disappears when the two face parts are misaligned (blocking holistic perception). In the present study, we investigated whether there is also a composite effect for the perception of body postures: are two identical body halves perceived as being in different poses when the irrelevant body halves differ from each other? Both a horizontal (i.e., top-bottom body halves; Experiment 1) and a vertical composite effect (i.e., left-right body halves; Experiment 2) were examined by means of a delayed matching-to-sample task. Results of both experiments indicate the existence of a body posture composite effect. This provides evidence for the hypothesis that body postures, as faces, are processed holistically. PMID:24999337

Virtual Academic Community: Online Education Instructors' Social Presence in Association with Freshman Composition Students' Critical Thinking and Argumentation

ERIC Educational Resources Information Center

Paquette, Paige Fuller

2009-01-01

There is much literature addressing challenges face-to-face freshman composition instructors encounter in developing college courses that foster critical thinking skills crucial to developing written argument. Composition instructors may face challenges in teaching students that writing is a means of making meaning, there are many different…

Importance of the Inverted Control in Measuring Holistic Face Processing with the Composite Effect and Part-Whole Effect

PubMed Central

McKone, Elinor; Davies, Anne Aimola; Darke, Hayley; Crookes, Kate; Wickramariyaratne, Tushara; Zappia, Stephanie; Fiorentini, Chiara; Favelle, Simone; Broughton, Mary; Fernando, Dinusha

2013-01-01

Holistic coding for faces is shown in several illusions that demonstrate integration of the percept across the entire face. The illusions occur upright but, crucially, not inverted. Converting the illusions into experimental tasks that measure their strength – and thus index degree of holistic coding – is often considered straightforward yet in fact relies on a hidden assumption, namely that there is no contribution to the experimental measure from secondary cognitive factors. For the composite effect, a relevant secondary factor is size of the “spotlight” of visuospatial attention. The composite task assumes this spotlight can be easily restricted to the target half (e.g., top-half) of the compound face stimulus. Yet, if this assumption were not true then a large spotlight, in the absence of holistic perception, could produce a false composite effect, present even for inverted faces and contributing partially to the score for upright faces. We review evidence that various factors can influence spotlight size: race/culture (Asians often prefer a more global distribution of attention than Caucasians); sex (females can be more global); appearance of the join or gap between face halves; and location of the eyes, which typically attract attention. Results from five experiments then show inverted faces can sometimes produce large false composite effects, and imply that whether this happens or not depends on complex interactions between causal factors. We also report, for both identity and expression, that only top-half face targets (containing eyes) produce valid composite measures. A sixth experiment demonstrates an example of a false inverted part-whole effect, where encoding-specificity is the secondary cognitive factor. We conclude the inverted face control should be tested in all composite and part-whole studies, and an effect for upright faces should be interpreted as a pure measure of holistic processing only when the experimental design produces no effect inverted. PMID:23382725

Emotion recognition training using composite faces generalises across identities but not all emotions.

PubMed

Dalili, Michael N; Schofield-Toloza, Lawrence; Munafò, Marcus R; Penton-Voak, Ian S

2017-08-01

Many cognitive bias modification (CBM) tasks use facial expressions of emotion as stimuli. Some tasks use unique facial stimuli, while others use composite stimuli, given evidence that emotion is encoded prototypically. However, CBM using composite stimuli may be identity- or emotion-specific, and may not generalise to other stimuli. We investigated the generalisability of effects using composite faces in two experiments. Healthy adults in each study were randomised to one of four training conditions: two stimulus-congruent conditions, where same faces were used during all phases of the task, and two stimulus-incongruent conditions, where faces of the opposite sex (Experiment 1) or faces depicting another emotion (Experiment 2) were used after the modification phase. Our results suggested that training effects generalised across identities. However, our results indicated only partial generalisation across emotions. These findings suggest effects obtained using composite stimuli may extend beyond the stimuli used in the task but remain emotion-specific.

Familiarity effects in the construction of facial-composite images using modern software systems.

PubMed

Frowd, Charlie D; Skelton, Faye C; Butt, Neelam; Hassan, Amal; Fields, Stephen; Hancock, Peter J B

2011-12-01

We investigate the effect of target familiarity on the construction of facial composites, as used by law enforcement to locate criminal suspects. Two popular software construction methods were investigated. Participants were shown a target face that was either familiar or unfamiliar to them and constructed a composite of it from memory using a typical 'feature' system, involving selection of individual facial features, or one of the newer 'holistic' types, involving repeated selection and breeding from arrays of whole faces. This study found that composites constructed of a familiar face were named more successfully than composites of an unfamiliar face; also, naming of composites of internal and external features was equivalent for construction of unfamiliar targets, but internal features were better named than the external features for familiar targets. These findings applied to both systems, although benefit emerged for the holistic type due to more accurate construction of internal features and evidence for a whole-face advantage. STATEMENT OF RELEVANCE: This work is of relevance to practitioners who construct facial composites with witnesses to and victims of crime, as well as for software designers to help them improve the effectiveness of their composite systems.

Social presence and the composite face effect.

PubMed

Garcia-Marques, Teresa; Fernandes, Alexandre; Fonseca, Ricardo; Prada, Marilia

2015-06-01

A robust finding in social psychology research is that performance is modulated by the social nature of a given context, promoting social inhibition or facilitation effects. In the present experiment, we examined if and how social presence impacts holistic face perception processes by asking participants, in the presence of others and alone, to perform the composite face task. Results suggest that completing the task in the presence of others (i.e., mere co-action) is associated with better performance in face recognition (less bias and higher discrimination between presented and non-presented targets) and with a reduction in the composite face effect. These results make clear that social presence impact on the composite face effect does not occur because presence increases reliance on holistic processing as a "dominant" well-learned response, but instead, because it increases monitoring of the interference produced by automatic response. Copyright © 2015. Published by Elsevier B.V.

Hemisphere-Dependent Holistic Processing of Familiar Faces

ERIC Educational Resources Information Center

Ramon, Meike; Rossion, Bruno

2012-01-01

In two behavioral experiments involving lateralized stimulus presentation, we tested whether one of the most commonly used measures of holistic face processing--the composite face effect--would be more pronounced for stimuli presented to the right as compared to the left hemisphere. In experiment 1, we investigated the composite face effect in a…

Elastic facial movement influences part-based but not holistic processing

PubMed Central

Xiao, Naiqi G.; Quinn, Paul C.; Ge, Liezhong; Lee, Kang

2013-01-01

Face processing has been studied for decades. However, most of the empirical investigations have been conducted using static face images as stimuli. Little is known about whether static face processing findings can be generalized to real world contexts, in which faces are constantly moving. The present study investigates the nature of face processing (holistic vs. part-based) in elastic moving faces. Specifically, we focus on whether elastic moving faces, as compared to static ones, can facilitate holistic or part-based face processing. Using the composite paradigm, participants were asked to remember either an elastic moving face (i.e., a face that blinks and chews) or a static face, and then tested with a static composite face. The composite effect was (1) significantly smaller in the dynamic condition than in the static condition, (2) consistently found with different face encoding times (Experiments 1–3), and (3) present for the recognition of both upper and lower face parts (Experiment 4). These results suggest that elastic facial motion facilitates part-based processing, rather than holistic processing. Thus, while previous work with static faces has emphasized an important role for holistic processing, the current work highlights an important role for featural processing with moving faces. PMID:23398253

Rigid Facial Motion Influences Featural, But Not Holistic, Face Processing

PubMed Central

Xiao, Naiqi; Quinn, Paul C.; Ge, Liezhong; Lee, Kang

2012-01-01

We report three experiments in which we investigated the effect of rigid facial motion on face processing. Specifically, we used the face composite effect to examine whether rigid facial motion influences primarily featural or holistic processing of faces. In Experiments 1, 2, and 3, participants were first familiarized with dynamic displays in which a target face turned from one side to another; then at test, participants judged whether the top half of a composite face (the top half of the target face aligned or misaligned with the bottom half of a foil face) belonged to the target face. We compared performance in the dynamic condition to various static control conditions in Experiments 1, 2, and 3, which differed from each other in terms of the display order of the multiple static images or the inter stimulus interval (ISI) between the images. We found that the size of the face composite effect in the dynamic condition was significantly smaller than that in the static conditions. In other words, the dynamic face display influenced participants to process the target faces in a part-based manner and consequently their recognition of the upper portion of the composite face at test became less interfered with by the aligned lower part of the foil face. The findings from the present experiments provide the strongest evidence to date to suggest that the rigid facial motion mainly influences facial featural, but not holistic, processing. PMID:22342561

[Perivenular whitening in central retinal vein occlusion demonstrated by "en-face" OCT].

PubMed

Marc, C; Gire, J; Boulicot, C; Guigou, S

2013-10-01

We report the case of a patient with a central vein occlusion associated with perivenular whitening. The "en-face" spectral domain OCT precisely demonstrated the ischemic area. This case underscores the utility of the "en-face" mode in the follow-up CRVO. Copyright © 2013. Published by Elsevier Masson SAS.

Framing faces: Frame alignment impacts holistic face perception.

PubMed

Curby, Kim M; Entenman, Robert

2016-11-01

Traditional accounts of face perception emphasise the importance of the prototypical configuration of features within faces. However, here we probe influences of more general perceptual grouping mechanisms on holistic face perception. Participants made part-matching judgments about composite faces presented in intact external oval frames or frames made from misaligned oval parts. This manipulation served to disrupt basic perceptual grouping cues that facilitate the grouping of the two face halves together. This manipulation also produced an external face contour like that in the standard misaligned condition used within the classic composite face task. Notably, by introducing a discontinuity in the external contour, grouping of the face halves into a cohesive unit was discouraged, but face configuration was preserved. Conditions where both the face parts and the frames were misaligned together, as in the typical composite task paradigm, or where just the internal face parts where misaligned, were also included. Disrupting only the face frame similarly disrupted holistic face perception as disrupting both the frame and face configuration. However, misaligned face parts presented in aligned frames also incurred a cost to holistic perception. These findings provide support for the contribution of general-purpose perceptual grouping mechanisms to holistic face perception and are presented and discussed in the context of an enhanced object-based selection account of holistic perception.

Adaptation of the membrane in Archaea.

PubMed

Oger, Philippe M; Cario, Anaïs

2013-12-15

Microbes often face contrasted and fluctuating environmental conditions, to which they need to adapt or die. Because membranes play a central role in regulating fluxes inward and outward from the cells, maintaining the appropriate structure of the membrane is crucial to maintain cellular integrity and functions. This is achieved in bacteria and eucarya by a modification of the membrane lipid compositions, a strategy termed homeoviscous adaptation. We review here evidence for homeoviscous adaptation in Archaea, and discuss the limits of this strategy and our knowledge in this very peculiar domain of life. © 2013 Elsevier B.V. All rights reserved.

Spatial-frequency cutoff requirements for pattern recognition in central and peripheral vision

PubMed Central

Kwon, MiYoung; Legge, Gordon E.

2011-01-01

It is well known that object recognition requires spatial frequencies exceeding some critical cutoff value. People with central scotomas who rely on peripheral vision have substantial difficulty with reading and face recognition. Deficiencies of pattern recognition in peripheral vision, might result in higher cutoff requirements, and may contribute to the functional problems of people with central-field loss. Here we asked about differences in spatial-cutoff requirements in central and peripheral vision for letter and face recognition. The stimuli were the 26 letters of the English alphabet and 26 celebrity faces. Each image was blurred using a low-pass filter in the spatial frequency domain. Critical cutoffs (defined as the minimum low-pass filter cutoff yielding 80% accuracy) were obtained by measuring recognition accuracy as a function of cutoff (in cycles per object). Our data showed that critical cutoffs increased from central to peripheral vision by 20% for letter recognition and by 50% for face recognition. We asked whether these differences could be accounted for by central/peripheral differences in the contrast sensitivity function (CSF). We addressed this question by implementing an ideal-observer model which incorporates empirical CSF measurements and tested the model on letter and face recognition. The success of the model indicates that central/peripheral differences in the cutoff requirements for letter and face recognition can be accounted for by the information content of the stimulus limited by the shape of the human CSF, combined with a source of internal noise and followed by an optimal decision rule. PMID:21854800

Student Learning Outcomes and Pedagogy in Online and Face-to-Face College English Composition: A Mixed Methods Study

ERIC Educational Resources Information Center

Montagne, Lisa

2012-01-01

This mixed methods study combined quantitative statistics and qualitative inquiry to determine if any differences exist between how students in face-to-face and online college English composition courses performed on and demonstrated knowledge of the California state curriculum standards, and to explore the online learning environment in this…

INTERIOR FROM MEZZANINE LEVEL OF CENTRAL SECTION, VIEW FACING WEST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR FROM MEZZANINE LEVEL OF CENTRAL SECTION, VIEW FACING WEST. - Naval Air Station Barbers Point, Aircraft Storehouse, Between Midway & Card Streets at Enterprise Avenue intersection, Ewa, Honolulu County, HI

From partial to full-face transplantation: total ablation and restoration, a change in the reconstructive paradigm.

PubMed

Barret, Juan P

2014-01-01

The innovation of composite vascularized allotransplantation has provided plastic and reconstructive surgeons with the ultimate tool for those patients that present with facial deformities that cannot be reconstructed with classical or more traditional techniques. Transplanting normal tissues allows for a true restorative surgery. Initial experiences included the substitution of missing anatomy, whereas after the first world's full-face transplant performed in Barcelona in March 2010, a true ablative surgery with a total restoration proved to be effective. We review the world's experience and the performance of our restorative protocol to depict this change in the reconstructive paradigm of facial transplantation. Facial transplants should be performed after a careful analysis of the defect, with a comprehensive ablation plan following esthetic units with sacrifice of all required tissues with a focus of global restoration of anatomy, aesthetics and function, respecting normal functioning muscles. Nowadays, facial transplants following strict esthetic units should restore disfigurement extending to small central areas, whereas major defects may require a total ablation and restoration with full-face transplants. Copyright © 2013 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Thermally induced changes in the focal distance of composite mirrors - Composites with a zero coefficient of thermal expansion of the radius of curvature

NASA Technical Reports Server (NTRS)

Dolgin, Benjamin P.

1992-01-01

Calculations are presented of the coefficient of thermal expansion (CTE) of the radius of curvature of the reflector face sheets made of a quasi-isotropic composite. It is shown that, upon cooling, the change of the CTE of the focal distance of the mirror is equal to that of the radius of the curvature of the reflector face sheet. The CTE of the radius of the curvature of a quasi-isotropic composite face sheet depends on both the in-plane and the out-of-plane CTEs. The zero in-plane CTE of a face sheet does not guarantee mirrors with no focal length changes.

Centralization or decentralization of facial structures in Korean young adults.

PubMed

Yoo, Ja-Young; Kim, Jeong-Nam; Shin, Kang-Jae; Kim, Soon-Heum; Choi, Hyun-Gon; Jeon, Hyun-Soo; Koh, Ki-Seok; Song, Wu-Chul

2013-05-01

It is well known that facial beauty is dictated by facial type, and harmony between the eyes, nose, and mouth. Furthermore, facial impression is judged according to the overall facial contour and the relationship between the facial structures. The aims of the present study were to determine the optimal criteria for the assessment of gathering or separation of the facial structures and to define standardized ratios for centralization or decentralization of the facial structures.Four different lengths were measured, and 2 indexes were calculated from standardized photographs of 551 volunteers. Centralization and decentralization were assessed using the width index (interpupillary distance / facial width) and height index (eyes-mouth distance / facial height). The mean ranges of the width index and height index were 42.0 to 45.0 and 36.0 to 39.0, respectively. The width index did not differ with sex, but males had more decentralized faces, and females had more centralized faces, vertically. The incidence rate of decentralized faces among the men was 30.3%, and that of centralized faces among the women was 25.2%.The mean ranges in width and height indexes have been determined in a Korean population. Faces with width and height index scores under and over the median ranges are determined to be "centralized" and "decentralized," respectively.

A Meta-Analysis and Review of Holistic Face Processing

PubMed Central

Richler, Jennifer J.; Gauthier, Isabel

2014-01-01

The concept of holistic processing is a cornerstone of face recognition research, yet central questions related to holistic processing remain unanswered, and debates have thus far failed to reach a resolution despite accumulating empirical evidence. We argue that a considerable source of confusion in this literature stems from a methodological problem. Specifically, two different measures of holistic processing based on the composite paradigm (complete design and partial design) are used in the literature, but they often lead to qualitatively different results. First, we present a comprehensive review of the work that directly compares the two designs, and which clearly favors the complete design over the partial design. Second, we report a meta-analysis of holistic face processing according to both designs, and use this as further evidence for one design over the other. The meta-analysis effect size of holistic processing in the complete design is nearly three times that of the partial design. Effect sizes were not correlated between measures, consistent with the suggestion that they do not measure the same thing. Our meta-analysis also examines the correlation between conditions in the complete design of the composite task, and suggests that in an individual differences context, little is gained by including a misaligned baseline. Finally, we offer a comprehensive review of the state of knowledge about holistic processing based on evidence gathered from the measure we favor based on the first sections of our review—the complete design—and outline outstanding research questions in that new context. PMID:24956123

Detail of central portion of southeast elevation; camera facing west. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of central portion of southeast elevation; camera facing west. - Mare Island Naval Shipyard, Hospital Ward, Johnson Lane, west side at intersection of Johnson Lane & Cossey Street, Vallejo, Solano County, CA

Thermal and Mechanical Buckling Analysis of Hypersonic Aircraft Hat-Stiffened Panels With Varying Face Sheet Geometry and Fiber Orientation

NASA Technical Reports Server (NTRS)

Ko, William L.

1996-01-01

Mechanical and thermal buckling behavior of monolithic and metal-matrix composite hat-stiffened panels were investigated. The panels have three types of face-sheet geometry: Flat face sheet, microdented face sheet, and microbulged face sheet. The metal-matrix composite panels have three types of face-sheet layups, each of which is combined with various types of hat composite layups. Finite-element method was used in the eigenvalue extractions for both mechanical and thermal buckling. The thermal buckling analysis required both eigenvalue and material property iterations. Graphical methods of the dual iterations are shown. The mechanical and thermal buckling strengths of the hat-stiffened panels with different face-sheet geometry are compared. It was found that by just microdenting or microbulging of the face sheet, the axial, shear, and thermal buckling strengths of both types of hat-stiffened panels could be enhanced considerably. This effect is more conspicuous for the monolithic panels. For the metal-matrix composite panels, the effect of fiber orientations on the panel buckling strengths was investigated in great detail, and various composite layup combinations offering, high panel buckling strengths are presented. The axial buckling strength of the metal-matrix panel was sensitive to the change of hat fiber orientation. However, the lateral, shear, and thermal buckling strengths were insensitive to the change of hat fiber orientation.

Writing as Involvement: A Case for Face-to-Face Classroom Talk in a Computer Age.

ERIC Educational Resources Information Center

Berggren, Anne G.

The abandonment of face-to-face voice conversations in favor of the use of electronic conversations in composition classes is an issue to be interrogated. In a recent push to "prepare students for the 21st century," teachers are asked to teach computer applications in the humanities--and composition teachers, who will teach writing in…

The relative importance of external and internal features of facial composites.

PubMed

Frowd, Charlie; Bruce, Vicki; McIntyre, Alex; Hancock, Peter

2007-02-01

Three experiments are reported that compare the quality of external with internal regions within a set of facial composites using two matching-type tasks. Composites are constructed with the aim of triggering recognition from people familiar with the targets, and past research suggests internal face features dominate representations of familiar faces in memory. However the experiments reported here show that the internal regions of composites are very poorly matched against the faces they purport to represent, while external feature regions alone were matched almost as well as complete composites. In Experiments 1 and 2 the composites used were constructed by participant-witnesses who were unfamiliar with the targets and therefore were predicted to demonstrate a bias towards the external parts of a face. In Experiment 3 we compared witnesses who were familiar or unfamiliar with the target items, but for both groups the external features were much better reproduced in the composites, suggesting it is the process of composite construction itself which is responsible for the poverty of the internal features. Practical implications of these results are discussed.

Optical power splitter for splitting high power light

DOEpatents

English, Jr., Ronald E.; Christensen, John J.

1995-01-01

An optical power splitter for the distribution of high-power light energy has a plurality of prisms arranged about a central axis to form a central channel. The input faces of the prisms are in a common plane which is substantially perpendicular to the central axis. A beam of light which is substantially coaxial to the central axis is incident on the prisms and at least partially strikes a surface area of each prism input face. The incident beam also partially passes through the central channel.

Dynamic Eye Tracking Based Metrics for Infant Gaze Patterns in the Face-Distractor Competition Paradigm

PubMed Central

Ahtola, Eero; Stjerna, Susanna; Yrttiaho, Santeri; Nelson, Charles A.; Leppänen, Jukka M.; Vanhatalo, Sampsa

2014-01-01

Objective To develop new standardized eye tracking based measures and metrics for infants’ gaze dynamics in the face-distractor competition paradigm. Method Eye tracking data were collected from two samples of healthy 7-month-old (total n = 45), as well as one sample of 5-month-old infants (n = 22) in a paradigm with a picture of a face or a non-face pattern as a central stimulus, and a geometric shape as a lateral stimulus. The data were analyzed by using conventional measures of infants’ initial disengagement from the central to the lateral stimulus (i.e., saccadic reaction time and probability) and, additionally, novel measures reflecting infants gaze dynamics after the initial disengagement (i.e., cumulative allocation of attention to the central vs. peripheral stimulus). Results The results showed that the initial saccade away from the centrally presented stimulus is followed by a rapid re-engagement of attention with the central stimulus, leading to cumulative preference for the central stimulus over the lateral stimulus over time. This pattern tended to be stronger for salient facial expressions as compared to non-face patterns, was replicable across two independent samples of 7-month-old infants, and differentiated between 7 and 5 month-old infants. Conclusion The results suggest that eye tracking based assessments of infants’ cumulative preference for faces over time can be readily parameterized and standardized, and may provide valuable techniques for future studies examining normative developmental changes in preference for social signals. Significance Standardized measures of early developing face preferences may have potential to become surrogate biomarkers of neurocognitive and social development. PMID:24845102

Upright face-preferential high-gamma responses in lower-order visual areas: evidence from intracranial recordings in children

PubMed Central

Matsuzaki, Naoyuki; Schwarzlose, Rebecca F.; Nishida, Masaaki; Ofen, Noa; Asano, Eishi

2015-01-01

Behavioral studies demonstrate that a face presented in the upright orientation attracts attention more rapidly than an inverted face. Saccades toward an upright face take place in 100-140 ms following presentation. The present study using electrocorticography determined whether upright face-preferential neural activation, as reflected by augmentation of high-gamma activity at 80-150 Hz, involved the lower-order visual cortex within the first 100 ms post-stimulus presentation. Sampled lower-order visual areas were verified by the induction of phosphenes upon electrical stimulation. These areas resided in the lateral-occipital, lingual, and cuneus gyri along the calcarine sulcus, roughly corresponding to V1 and V2. Measurement of high-gamma augmentation during central (circular) and peripheral (annular) checkerboard reversal pattern stimulation indicated that central-field stimuli were processed by the more polar surface whereas peripheral-field stimuli by the more anterior medial surface. Upright face stimuli, compared to inverted ones, elicited up to 23% larger augmentation of high-gamma activity in the lower-order visual regions at 40-90 ms. Upright face-preferential high-gamma augmentation was more highly correlated with high-gamma augmentation for central than peripheral stimuli. Our observations are consistent with the hypothesis that lower-order visual regions, especially those for the central field, are involved in visual cues for rapid detection of upright face stimuli. PMID:25579446

Global shape information increases but color information decreases the composite face effect.

PubMed

Retter, Talia L; Rossion, Bruno

2015-01-01

The separation of visual shape and surface information may be useful for understanding holistic face perception--that is, the perception of a face as a single unit (Jiang, Blanz, & Rossion, 2011, Visual Cognition, 19, 1003-1034). A widely used measure of holistic face perception is the composite face effect (CFE), in which identical top face halves appear different when aligned with bottom face halves from different identities. In the present study the influences of global face shape (ie contour of the face) and color information on the CFE are investigated, with the hypothesis that global face shape supports but color impairs holistic face perception as measured in this paradigm. In experiment 1 the CFE is significantly increased when face stimuli possess natural global shape information than when cropped to a generic (ie oval) global shape; this effect is not found when the stimuli are presented inverted. In experiment 2 the CFE is significantly decreased when face stimuli are presented with color information than when presented in grayscale. These findings indicate that grayscale stimuli maintaining natural global face shape information provide the most adept measure of holistic face perception in the behavioral composite face paradigm. More generally, they show that reducing different types of information diagnostic for individual face perception can have opposite effects on the CFE, illustrating the functional dissociation between shape and surface information in face perception.

The influence of attention on holistic face encoding.

PubMed

Boutet, Isabelle; Gentes-Hawn, Alyson; Chaudhuri, Avi

2002-07-01

We examined the influence of attention on the formation of holistic face representations using the composite effect (Perception 16 (1987) 747). In Experiment 1, stimuli composed of a face superimposed on a house were shown during encoding. Subjects delineated either the face or the house, thus manipulating attention away or toward the face. In Experiment 2, an intact face image was presented with letters scrolling from top to bottom. Subjects were asked to either ignore the letters or read them and decipher the words that they formed. Aligned and misaligned composites were shown at testing. Recognition performance was consistently better for misaligned than aligned stimuli, regardless of the allocation of attention during encoding. In Experiment 3, we show that the composite effect can be eliminated by a disruption in holistic processing at the time of encoding. We conclude that holistic encoding is one aspect of face analysis that occurs equally well with or without attention.

The role of eye movements in decision making and the prospect of exposure effects.

PubMed

Bird, Gary D; Lauwereyns, Johan; Crawford, Matthew T

2012-05-01

The aim of the current study was to follow on from previous findings that eye movements can have a causal influence on preference formation. Shimojo et al. (2003) previously found that faces that were presented for a longer duration in a two alternative forced choice task were more likely to be judged as more attractive. This effect only occurred when an eye movement was made towards the faces (with no effect when faces were centrally presented). The current study replicated Shimojo et al.'s (2003) design, whilst controlling for potential inter-stimuli interference in central presentations. As per previous findings, when eye movements were made towards the stimuli, faces that were presented for longer durations were preferred. However, faces that were centrally presented (thus not requiring an eye movement) were also preferred in the current study. The presence of an exposure duration effect for centrally presented faces casts doubt on the necessity of the eye movement in this decision making process and has implications for decision theories that place an emphasis on the role of eye movements in decision making. Copyright © 2012 Elsevier Ltd. All rights reserved.

Holistic integration of gaze cues in visual face and body perception: Evidence from the composite design.

PubMed

Vrancken, Leia; Germeys, Filip; Verfaillie, Karl

2017-01-01

A considerable amount of research on identity recognition and emotion identification with the composite design points to the holistic processing of these aspects in faces and bodies. In this paradigm, the interference from a nonattended face half on the perception of the attended half is taken as evidence for holistic processing (i.e., a composite effect). Far less research, however, has been dedicated to the concept of gaze. Nonetheless, gaze perception is a substantial component of face and body perception, and holds critical information for everyday communicative interactions. Furthermore, the ability of human observers to detect direct versus averted eye gaze is effortless, perhaps similar to identity perception and emotion recognition. However, the hypothesis of holistic perception of eye gaze has never been tested directly. Research on gaze perception with the composite design could facilitate further systematic comparison with other aspects of face and body perception that have been investigated using the composite design (i.e., identity and emotion). In the present research, a composite design was administered to assess holistic processing of gaze cues in faces (Experiment 1) and bodies (Experiment 2). Results confirmed that eye and head orientation (Experiment 1A) and head and body orientation (Experiment 2A) are integrated in a holistic manner. However, the composite effect was not completely disrupted by inversion (Experiments 1B and 2B), a finding that will be discussed together with implications for future research.

Whole-face procedures for recovering facial images from memory.

PubMed

Frowd, Charlie D; Skelton, Faye; Hepton, Gemma; Holden, Laura; Minahil, Simra; Pitchford, Melanie; McIntyre, Alex; Brown, Charity; Hancock, Peter J B

2013-06-01

Research has indicated that traditional methods for accessing facial memories usually yield unidentifiable images. Recent research, however, has made important improvements in this area to the witness interview, method used for constructing the face and recognition of finished composites. Here, we investigated whether three of these improvements would produce even-more recognisable images when used in conjunction with each other. The techniques are holistic in nature: they involve processes which operate on an entire face. Forty participants first inspected an unfamiliar target face. Nominally 24h later, they were interviewed using a standard type of cognitive interview (CI) to recall the appearance of the target, or an enhanced 'holistic' interview where the CI was followed by procedures for focussing on the target's character. Participants then constructed a composite using EvoFIT, a recognition-type system that requires repeatedly selecting items from face arrays, with 'breeding', to 'evolve' a composite. They either saw faces in these arrays with blurred external features, or an enhanced method where these faces were presented with masked external features. Then, further participants attempted to name the composites, first by looking at the face front-on, the normal method, and then for a second time by looking at the face side-on, which research demonstrates facilitates recognition. All techniques improved correct naming on their own, but together promoted highly-recognisable composites with mean naming at 74% correct. The implication is that these techniques, if used together by practitioners, should substantially increase the detection of suspects using this forensic method of person identification. Copyright © 2013 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

High heat flux composites for plasma-facing materials

NASA Astrophysics Data System (ADS)

Ting, J.-M.; Lake, M. L.

1994-09-01

Vapor grown carbon fiber (VGCF) has been shown to have the highest thermal conductivity of all carbon fiber currently available. This property holds potential of increasing the thickness and longevity of fusion reactor plasma-facing materials. The use of VGCF as a reinforcement in carbon/carbon composites has been explored, as well as methods of joining these plasma-facing materials to copper alloy heat pipes. In extensive study of VGCF/carbon matrix composites, the influence of fiber volume fraction, density, densification method, and heat treatment on composite properties were investigated. Joining of VGCF/carbon composites to copper and beryllium to copper using a novel alloying method was studied. The joint interface was examined by RBS analysis and thermal conductance.

Dissociation between the behavioural and electrophysiological effects of the face and body composite illusions.

PubMed

Soria Bauser, Denise A; Schriewer, Elisabeth; Suchan, Boris

2015-08-01

Several studies have reported similarities between perceptual processes underlying face and body perception, particularly emphasizing the importance of configural processes. Differences between the perception of faces and the perception of bodies were observed by means of a manipulation targeting a specific subtype of configural processing: the composite illusion. The composite face illusion describes the fact that two identical top halves of a face are perceived as being different if they are presented with different bottom parts. This effect disappears, if both halves are laterally shifted. Crucially, the effect of misalignment is not observed for bodies. This study aimed to further explore differences in the time course of face and body perception by using the composite effect. The present results replicated behavioural effects illustrating that misalignment affects the perception of faces but not bodies. Thus, face but not body perception relies on holistic processing. However, differences in the time course of the processing of both stimulus categories emerged at the N170 and P200. The pattern of the behavioural data seemed to be related to the P200. Thus, the present data indicate that holistic processes associated with the effect of misalignment might occur 200 ms after stimulus onset. © 2014 The British Psychological Society.

Holistic processing of face configurations and components.

PubMed

Hayward, William G; Crookes, Kate; Chu, Ming Hon; Favelle, Simone K; Rhodes, Gillian

2016-10-01

Although many researchers agree that faces are processed holistically, we know relatively little about what information holistic processing captures from a face. Most studies that assess the nature of holistic processing do so with changes to the face affecting many different aspects of face information (e.g., different identities). Does holistic processing affect every aspect of a face? We used the composite task, a common means of examining the strength of holistic processing, with participants making same-different judgments about configuration changes or component changes to 1 portion of a face. Configuration changes involved changes in spatial position of the eyes, whereas component changes involved lightening or darkening the eyebrows. Composites were either aligned or misaligned, and were presented either upright or inverted. Both configuration judgments and component judgments showed evidence of holistic processing, and in both cases it was strongest for upright face composites. These results suggest that holistic processing captures a broad range of information about the face, including both configuration-based and component-based information. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Optical power splitter for splitting high power light

DOEpatents

English, R.E. Jr.; Christensen, J.J.

1995-04-18

An optical power splitter for the distribution of high-power light energy has a plurality of prisms arranged about a central axis to form a central channel. The input faces of the prisms are in a common plane which is substantially perpendicular to the central axis. A beam of light which is substantially coaxial to the central axis is incident on the prisms and at least partially strikes a surface area of each prism input face. The incident beam also partially passes through the central channel. 5 figs.

Attractiveness of facial averageness and symmetry in non-western cultures: in search of biologically based standards of beauty.

PubMed

Rhodes, G; Yoshikawa, S; Clark, A; Lee, K; McKay, R; Akamatsu, S

2001-01-01

Averageness and symmetry are attractive in Western faces and are good candidates for biologically based standards of beauty. A hallmark of such standards is that they are shared across cultures. We examined whether facial averageness and symmetry are attractive in non-Western cultures. Increasing the averageness of individual faces, by warping those faces towards an averaged composite of the same race and sex, increased the attractiveness of both Chinese (experiment 1) and Japanese (experiment 2) faces, for Chinese and Japanese participants, respectively. Decreasing averageness by moving the faces away from an average shape decreased attractiveness. We also manipulated the symmetry of Japanese faces by blending each original face with its mirror image to create perfectly symmetric versions. Japanese raters preferred the perfectly symmetric versions to the original faces (experiment 2). These findings show that preferences for facial averageness and symmetry are not restricted to Western cultures, consistent with the view that they are biologically based. Interestingly, it made little difference whether averageness was manipulated by using own-race or other-race averaged composites and there was no preference for own-race averaged composites over other-race or mixed-race composites (experiment 1). We discuss the implications of these results for understanding what makes average faces attractive. We also discuss some limitations of our studies, and consider other lines of converging evidence that may help determine whether preferences for average and symmetric faces are biologically based.

Compressive behavior of energy-saving fired facing brick composite wall

NASA Astrophysics Data System (ADS)

Guo, Kai; Wu, Cai

2018-03-01

The energy-saving fired facing brick composite wall has a broad development prospects due to its merits of thermal insulation, energy conservation, beautiful, and natural. The construction and characteristics of this wall are introduced and analyzed in this paper. Experimental studies of samples are also conducted to investigate its compressive performance. The results show that the energy-saving fired facing brick composite wall has high compressive capacity. It has considerable application prospect, the study in this paper provides foundation to further studies.

Four heads are better than one: combining face composites yields improvements in face likeness.

PubMed

Bruce, Vicki; Ness, Hayley; Hancock, Peter J B; Newman, Craig; Rarity, Jenny

2002-10-01

Four participants constructed face composites, of familiar and unfamiliar targets, using Pro-Fit, with reference images present or from memory. The "mean" of all 4 composites, created by morphing (4-morph) was rated as a better likeness than individual composites on average and was as good as the best individual likeness. When participants attempted to identify targets from line-ups, 4-morphs again performed as well as the best individual composite. In a second experiment, participants familiar with target women attempted to identify composites, and the trend showed better recognition from multiple composites, whether combined or shown together. In a line-up task with unfamiliar participants, 4-morphs produced most correct choices and fewest false positives from target-absent or target-present arrays. These results have practical implications for the way evidence from different witnesses is used in police investigations.

Analyses of quasi-isotropic composite plates under quasi-static point loads simulating low-velocity impact phenomena

NASA Technical Reports Server (NTRS)

Kelkar, A. D.

1984-01-01

In thin composite laminates, the first level of visible damage occurs in the back face and is called back face spalling. A plate-membrane coupling model, and a finite element model to analyze the large deformation behavior of eight-ply quasi-isotropic circular composite plates under impact type point loads are developed. The back face spalling phenomenon in thin composite plates is explained by using the plate-membrane coupling model and the finite element model in conjunction with the fracture mechanics principles. The experimental results verifying these models are presented. Several conclusions concerning the deformation behavior are reached and discussed in detail.

A meta-analysis and review of holistic face processing.

PubMed

Richler, Jennifer J; Gauthier, Isabel

2014-09-01

The concept of holistic processing is a cornerstone of face recognition research, yet central questions related to holistic processing remain unanswered, and debates have thus far failed to reach a resolution despite accumulating empirical evidence. We argue that a considerable source of confusion in this literature stems from a methodological problem. Specifically, 2 measures of holistic processing based on the composite paradigm (complete design and partial design) are used in the literature, but they often lead to qualitatively different results. First, we present a comprehensive review of the work that directly compares the 2 designs, and which clearly favors the complete design over the partial design. Second, we report a meta-analysis of holistic face processing according to both designs and use this as further evidence for one design over the other. The meta-analysis effect size of holistic processing in the complete design is nearly 3 times that of the partial design. Effect sizes were not correlated between measures, consistent with the suggestion that they do not measure the same thing. Our meta-analysis also examines the correlation between conditions in the complete design of the composite task, and suggests that in an individual differences context, little is gained by including a misaligned baseline. Finally, we offer a comprehensive review of the state of knowledge about holistic processing based on evidence gathered from the measure we favor based on the 1st sections of our review-the complete design-and outline outstanding research questions in that new context. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Does Facial Resemblance Enhance Cooperation?

PubMed Central

Giang, Trang; Bell, Raoul; Buchner, Axel

2012-01-01

Facial self-resemblance has been proposed to serve as a kinship cue that facilitates cooperation between kin. In the present study, facial resemblance was manipulated by morphing stimulus faces with the participants' own faces or control faces (resulting in self-resemblant or other-resemblant composite faces). A norming study showed that the perceived degree of kinship was higher for the participants and the self-resemblant composite faces than for actual first-degree relatives. Effects of facial self-resemblance on trust and cooperation were tested in a paradigm that has proven to be sensitive to facial trustworthiness, facial likability, and facial expression. First, participants played a cooperation game in which the composite faces were shown. Then, likability ratings were assessed. In a source memory test, participants were required to identify old and new faces, and were asked to remember whether the faces belonged to cooperators or cheaters in the cooperation game. Old-new recognition was enhanced for self-resemblant faces in comparison to other-resemblant faces. However, facial self-resemblance had no effects on the degree of cooperation in the cooperation game, on the emotional evaluation of the faces as reflected in the likability judgments, and on the expectation that a face belonged to a cooperator rather than to a cheater. Therefore, the present results are clearly inconsistent with the assumption of an evolved kin recognition module built into the human face recognition system. PMID:23094095

Evolving and Combining Facial Composites: Between-Witness and Within-Witness Morphs Compared

ERIC Educational Resources Information Center

Valentine, Tim; Davis, Josh P.; Thorner, Kate; Solomon, Chris; Gibson, Stuart

2010-01-01

Student participant-witnesses produced 4 composites of unfamiliar faces with a system that uses a genetic algorithm to evolve appearance of artificial faces. Morphs of 4 composites produced by different witnesses (between-witness morphs) were judged better likenesses (Experiment 1) and were more frequently named (Experiment 2) by participants who…

Improved Fabrication of Ceramic Matrix Composite/Foam Core Integrated Structures

NASA Technical Reports Server (NTRS)

Hurwitz, Frances I.

2009-01-01

The use of hybridized carbon/silicon carbide (C/SiC) fabric to reinforce ceramic matrix composite face sheets and the integration of such face sheets with a foam core creates a sandwich structure capable of withstanding high-heatflux environments (150 W/cm2) in which the core provides a temperature drop of 1,000 C between the surface and the back face without cracking or delamination of the structure. The composite face sheet exhibits a bilinear response, which results from the SiC matrix not being cracked on fabrication. In addition, the structure exhibits damage tolerance under impact with projectiles, showing no penetration to the back face sheet. These attributes make the composite ideal for leading edge structures and control surfaces in aerospace vehicles, as well as for acreage thermal protection systems and in high-temperature, lightweight stiffened structures. By tailoring the coefficient of thermal expansion (CTE) of a carbon fiber containing ceramic matrix composite (CMC) face sheet to match that of a ceramic foam core, the face sheet and the core can be integrally fabricated without any delamination. Carbon and SiC are woven together in the reinforcing fabric. Integral densification of the CMC and the foam core is accomplished with chemical vapor deposition, eliminating the need for bond-line adhesive. This means there is no need to separately fabricate the core and the face sheet, or to bond the two elements together, risking edge delamination during use. Fibers of two or more types are woven together on a loom. The carbon and ceramic fibers are pulled into the same pick location during the weaving process. Tow spacing may be varied to accommodate the increased volume of the combined fiber tows while maintaining a target fiber volume fraction in the composite. Foam pore size, strut thickness, and ratio of face sheet to core thickness can be used to tailor thermal and mechanical properties. The anticipated CTE for the hybridized composite is managed by the choice of constituents, varying fiber tow sizes and constituent part ratios. This structural concept provides high strength and stiffness at low density 1.06 g/cm3 in panels tested. Varieties of face sheet constructions are possible, including variations in fiber type and weave geometry. The integrated structures possible with this composite could eliminate the need for non-load-bearing thermal protection systems on top of a structural component. The back sheet can readily be integrated to substructures through the incorporation of ribs. This would eliminate weight and cost for aerospace missions.

Designing a composite correlation filter based on iterative optimization of training images for distortion invariant face recognition

NASA Astrophysics Data System (ADS)

Wang, Q.; Elbouz, M.; Alfalou, A.; Brosseau, C.

2017-06-01

We present a novel method to optimize the discrimination ability and noise robustness of composite filters. This method is based on the iterative preprocessing of training images which can extract boundary and detailed feature information of authentic training faces, thereby improving the peak-to-correlation energy (PCE) ratio of authentic faces and to be immune to intra-class variance and noise interference. By adding the training images directly, one can obtain a composite template with high discrimination ability and robustness for face recognition task. The proposed composite correlation filter does not involve any complicated mathematical analysis and computation which are often required in the design of correlation algorithms. Simulation tests have been conducted to check the effectiveness and feasibility of our proposal. Moreover, to assess robustness of composite filters using receiver operating characteristic (ROC) curves, we devise a new method to count the true positive and false positive rates for which the difference between PCE and threshold is involved.

Holistic processing is finely tuned for faces of one's own race.

PubMed

Michel, Caroline; Rossion, Bruno; Han, Jaehyun; Chung, Chan-Sup; Caldara, Roberto

2006-07-01

Recognizing individual faces outside one's race poses difficulty, a phenomenon known as the other-race effect. Most researchers agree that this effect results from differential experience with same-race (SR) and other-race (OR) faces. However, the specific processes that develop with visual experience and underlie the other-race effect remain to be clarified. We tested whether the integration of facial features into a whole representation-holistic processing-was larger for SR than OR faces in Caucasians and Asians without life experience with OR faces. For both classes of participants, recognition of the upper half of a composite-face stimulus was more disrupted by the bottom half (the composite-face effect) for SR than OR faces, demonstrating that SR faces are processed more holistically than OR faces. This differential holistic processing for faces of different races, probably a by-product of visual experience, may be a critical factor in the other-race effect.

Electrical Stimulation over Bilateral Occipito-Temporal Regions Reduces N170 in the Right Hemisphere and the Composite Face Effect

PubMed Central

Yang, Li-Zhuang; Zhang, Wei; Shi, Bin; Yang, Zhiyu; Wei, Zhengde; Gu, Feng; Zhang, Jing; Cui, Guanbao; Liu, Ying; Zhou, Yifeng; Zhang, Xiaochu; Rao, Hengyi

2014-01-01

Transcranial direct current stimulation (tDCS) is a non-invasive brain stimulation technique that can modulate cortical excitability. Although the clinical value of tDCS has been advocated, the potential of tDCS in cognitive rehabilitation of face processing deficits is less understood. Face processing has been associated with the occipito-temporal cortex (OT). The present study investigated whether face processing in healthy adults can be modulated by applying tDCS over the OT. Experiment 1 investigated whether tDCS can affect N170, a face-sensitive ERP component, with a face orientation judgment task. The N170 in the right hemisphere was reduced in active stimulation conditions compared with the sham stimulation condition for both upright faces and inverted faces. Experiment 2 further demonstrated that tDCS can modulate the composite face effect, a type of holistic processing that reflects the obligatory attention to all parts of a face. The composite face effect was reduced in active stimulation conditions compared with the sham stimulation condition. Additionally, the current polarity did not modulate the effect of tDCS in the two experiments. The present study demonstrates that N170 can be causally manipulated by stimulating the OT with weak currents. Furthermore, our study provides evidence that obligatory attention to all parts of a face can be affected by the commonly used tDCS parameter setting. PMID:25531112

Enhancement of dissolution and oral bioavailability of lacidipine via pluronic P123/F127 mixed polymeric micelles: formulation, optimization using central composite design and in vivo bioavailability study.

PubMed

Fares, Ahmed R; ElMeshad, Aliaa N; Kassem, Mohamed A A

2018-11-01

This study aims at preparing and optimizing lacidipine (LCDP) polymeric micelles using thin film hydration technique in order to overcome LCDP solubility-limited oral bioavailability. A two-factor three-level central composite face-centered design (CCFD) was employed to optimize the formulation variables to obtain LCDP polymeric micelles of high entrapment efficiency and small and uniform particle size (PS). Formulation variables were: Pluronic to drug ratio (A) and Pluronic P123 percentage (B). LCDP polymeric micelles were assessed for entrapment efficiency (EE%), PS and polydispersity index (PDI). The formula with the highest desirability (0.959) was chosen as the optimized formula. The values of the formulation variables (A and B) in the optimized polymeric micelles formula were 45% and 80%, respectively. Optimum LCDP polymeric micelles had entrapment efficiency of 99.23%, PS of 21.08 nm and PDI of 0.11. Optimum LCDP polymeric micelles formula was physically characterized using transmission electron microscopy. LCDP polymeric micelles showed saturation solubility approximately 450 times that of raw LCDP in addition to significantly enhanced dissolution rate. Bioavailability study of optimum LCDP polymeric micelles formula in rabbits revealed a 6.85-fold increase in LCDP bioavailability compared to LCDP oral suspension.

A Study on Flexural Properties of Sandwich Structures with Fiber/Metal Laminate Face Sheets

NASA Astrophysics Data System (ADS)

Dariushi, S.; Sadighi, M.

2013-10-01

In this work, a new family of sandwich structures with fiber metal laminate (FML) faces is investigated. FMLs have benefits over both metal and fiber reinforced composites. To investigate the bending properties of sandwich beams with FML faces and compare with similar sandwich beams with fibrous composite faces, 6 groups of specimen with different layer arrangements were made and tested. Results show that FML faces have good resistance against transverse local loads and minimize stress concentration and local deformations of skin and core under the loading tip. In addition, FML faces have a good integrity even after plateau region of foam cores and prevent from catastrophic failures, which cannot be seen in fibrous composite faces. Also, FML faces are lighter than metal faces and have better connection with foam cores. Sandwich beams with FML faces have a larger elastic region because of simultaneous deformation of top and bottom faces and larger failure strain thanks to good durability of FMLs. A geometrical nonlinear classical theory is used to predict force-deflection behavior. In this model an explicit formula between symmetrical sandwich beams deflections and applied force which can be useful for designers, is derived. Good agreement is obtained between the analytical predictions and experimental results. Also, analytical results are compared with small deformation solution in a parametric study, and the effects of geometric parameters on difference between linear and nonlinear results are discussed.

About-face on face recognition ability and holistic processing

PubMed Central

Richler, Jennifer J.; Floyd, R. Jackie; Gauthier, Isabel

2015-01-01

Previous work found a small but significant relationship between holistic processing measured with the composite task and face recognition ability measured by the Cambridge Face Memory Test (CFMT; Duchaine & Nakayama, 2006). Surprisingly, recent work using a different measure of holistic processing (Vanderbilt Holistic Face Processing Test [VHPT-F]; Richler, Floyd, & Gauthier, 2014) and a larger sample found no evidence for such a relationship. In Experiment 1 we replicate this unexpected result, finding no relationship between holistic processing (VHPT-F) and face recognition ability (CFMT). A key difference between the VHPT-F and other holistic processing measures is that unique face parts are used on each trial in the VHPT-F, unlike in other tasks where a small set of face parts repeat across the experiment. In Experiment 2, we test the hypothesis that correlations between the CFMT and holistic processing tasks are driven by stimulus repetition that allows for learning during the composite task. Consistent with our predictions, CFMT performance was correlated with holistic processing in the composite task when a small set of face parts repeated over trials, but not when face parts did not repeat. A meta-analysis confirms that relationships between the CFMT and holistic processing depend on stimulus repetition. These results raise important questions about what is being measured by the CFMT, and challenge current assumptions about why faces are processed holistically. PMID:26223027

About-face on face recognition ability and holistic processing.

PubMed

Richler, Jennifer J; Floyd, R Jackie; Gauthier, Isabel

2015-01-01

Previous work found a small but significant relationship between holistic processing measured with the composite task and face recognition ability measured by the Cambridge Face Memory Test (CFMT; Duchaine & Nakayama, 2006). Surprisingly, recent work using a different measure of holistic processing (Vanderbilt Holistic Face Processing Test [VHPT-F]; Richler, Floyd, & Gauthier, 2014) and a larger sample found no evidence for such a relationship. In Experiment 1 we replicate this unexpected result, finding no relationship between holistic processing (VHPT-F) and face recognition ability (CFMT). A key difference between the VHPT-F and other holistic processing measures is that unique face parts are used on each trial in the VHPT-F, unlike in other tasks where a small set of face parts repeat across the experiment. In Experiment 2, we test the hypothesis that correlations between the CFMT and holistic processing tasks are driven by stimulus repetition that allows for learning during the composite task. Consistent with our predictions, CFMT performance was correlated with holistic processing in the composite task when a small set of face parts repeated over trials, but not when face parts did not repeat. A meta-analysis confirms that relationships between the CFMT and holistic processing depend on stimulus repetition. These results raise important questions about what is being measured by the CFMT, and challenge current assumptions about why faces are processed holistically.

Becoming a Lunari or Taiyo expert: learned attention to parts drives holistic processing of faces.

PubMed

Chua, Kao-Wei; Richler, Jennifer J; Gauthier, Isabel

2014-06-01

Faces are processed holistically, but the locus of holistic processing remains unclear. We created two novel races of faces (Lunaris and Taiyos) to study how experience with face parts influences holistic processing. In Experiment 1, subjects individuated Lunaris wherein the top, bottom, or both face halves contained diagnostic information. Subjects who learned to attend to face parts exhibited no holistic processing. This suggests that individuation only leads to holistic processing when the whole face is attended. In Experiment 2, subjects individuated both Lunaris and Taiyos, with diagnostic information in complementary face halves of the two races. Holistic processing was measured with composites made of either diagnostic or nondiagnostic face parts. Holistic processing was only observed for composites made from diagnostic face parts, demonstrating that holistic processing can occur for diagnostic face parts that were never seen together. These results suggest that holistic processing is an expression of learned attention to diagnostic face parts. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Recovering faces from memory: the distracting influence of external facial features.

PubMed

Frowd, Charlie D; Skelton, Faye; Atherton, Chris; Pitchford, Melanie; Hepton, Gemma; Holden, Laura; McIntyre, Alex H; Hancock, Peter J B

2012-06-01

Recognition memory for unfamiliar faces is facilitated when contextual cues (e.g., head pose, background environment, hair and clothing) are consistent between study and test. By contrast, inconsistencies in external features, especially hair, promote errors in unfamiliar face-matching tasks. For the construction of facial composites, as carried out by witnesses and victims of crime, the role of external features (hair, ears, and neck) is less clear, although research does suggest their involvement. Here, over three experiments, we investigate the impact of external features for recovering facial memories using a modern, recognition-based composite system, EvoFIT. Participant-constructors inspected an unfamiliar target face and, one day later, repeatedly selected items from arrays of whole faces, with "breeding," to "evolve" a composite with EvoFIT; further participants (evaluators) named the resulting composites. In Experiment 1, the important internal-features (eyes, brows, nose, and mouth) were constructed more identifiably when the visual presence of external features was decreased by Gaussian blur during construction: higher blur yielded more identifiable internal-features. In Experiment 2, increasing the visible extent of external features (to match the target's) in the presented face-arrays also improved internal-features quality, although less so than when external features were masked throughout construction. Experiment 3 demonstrated that masking external-features promoted substantially more identifiable images than using the previous method of blurring external-features. Overall, the research indicates that external features are a distractive rather than a beneficial cue for face construction; the results also provide a much better method to construct composites, one that should dramatically increase identification of offenders.

Visual Expertise Does Not Predict the Composite Effect across Species: A Comparison between Spider ("Ateles geoffroyi") and Rhesus ("Macaca mulatta") Monkeys

ERIC Educational Resources Information Center

Taubert, Jessica; Parr, Lisa A.

2009-01-01

Humans are subject to the composite illusion: two identical top halves of a face are perceived as "different" when they are presented with different bottom halves. This observation suggests that when building a mental representation of a face, the underlying system perceives the whole face, and has difficulty decomposing facial features. We…

Own- and Other-Race Face Identity Recognition in Children: The Effects of Pose and Feature Composition

ERIC Educational Resources Information Center

Anzures, Gizelle; Kelly, David J.; Pascalis, Olivier; Quinn, Paul C.; Slater, Alan M.; de Viviés, Xavier; Lee, Kang

2014-01-01

We used a matching-to-sample task and manipulated facial pose and feature composition to examine the other-race effect (ORE) in face identity recognition between 5 and 10 years of age. Overall, the present findings provide a genuine measure of own- and other-race face identity recognition in children that is independent of photographic and image…

Does Temporal Integration of Face Parts Reflect Holistic Processing?

PubMed Central

Cheung, Olivia S.; Richler, Jennifer J.; Phillips, W. Stewart; Gauthier, Isabel

2011-01-01

We examined whether temporal integration of face parts reflects holistic processing or response interference. Participants learned to name two faces “Fred” and two “Bob”. At test, top and bottom halves of different faces formed composites and were presented briefly separated in time. Replicating prior findings (Singer & Sheinberg, 2006), naming of the target halves for aligned composites was slowed when the irrelevant halves were from faces with a different name compared to that from the original face. However, no interference was observed when the irrelevant halves had identical names as the target halves but came from different learned faces, arguing against a true holistic effect. Instead, response interference was obtained when the target halves briefly preceded the irrelevant halves. Experiment 2 confirmed a double-dissociation between holistic processing vs. response interference for intact faces vs. temporally separated face halves, suggesting that simultaneous presentation of facial information is critical for holistic processing. PMID:21327378

Inert Welding/Brazing Gas Filters and Dryers

NASA Technical Reports Server (NTRS)

Goudy, Jerry

2009-01-01

The use of hybridized carbon/silicon carbide (C/SiC) fabric to reinforce ceramic matrix composite face sheets and the integration of such face sheets with a foam core creates a sandwich structure capable of withstanding high-heat-flux environments (150 W/sq cm) in which the core provides a temperature drop of 1,000 C between the surface and the back face without cracking or delamination of the structure. The composite face sheet exhibits a bilinear response, which results from the SiC matrix not being cracked on fabrication. In addition, the structure exhibits damage tolerance under impact with projectiles, showing no penetration to the back face sheet. These attributes make the composite ideal for leading-edge structures and control surfaces in aerospace vehicles, as well as for acreage thermal protection systems and in high-temperature, lightweight stiffened structures. By tailoring the coefficient of thermal expansion (CTE) of a carbon fiber containing ceramic matrix composite (CMC) face sheet to match that of a ceramic foam core, the face sheet and the core can be integrally fabricated without any delamination. Carbon and SiC are woven together in the reinforcing fabric. Integral densification of the CMC and the foam core is accomplished with chemical vapor deposition, eliminating the need for bond-line adhesive. This means there is no need to separately fabricate the core and the face sheet, or to bond the two elements together, risking edge delamination during use. Fibers of two or more types are woven together on a loom. The carbon and ceramic fibers are pulled into the same "pick" location during the weaving process. Tow spacing may be varied to accommodate the increased volume of the combined fiber tows while maintaining a target fiber volume fraction in the composite. Foam pore size, strut thickness, and ratio of face sheet to core thickness can be used to tailor thermal and mechanical properties. The anticipated CTE for the hybridized composite is managed by the choice of constituents, varying fiber tow sizes and constituent part ratios. This structural concept provides high strength and stiffness at low density 1.06 g/cu cm in panels tested. Varieties of face sheet constructions are possible, including variations in fiber type and weave geometry. The integrated structures possible with this composite could eliminate the need for non-load-bearing thermal protection systems on top of a structural component. The back sheet can readily be integrated to substructures through the incorporation of ribs. This would eliminate weight and cost for aerospace missions.

Access Barriers to Distance Education in Secondary Career and Technical Education Programs in Central Virginia

ERIC Educational Resources Information Center

Goodwyn, Patrell Vachyi

2010-01-01

The qualitative phenomenological study explored the perceived institutional access barriers to distance education at comprehensive high schools with secondary career and technical education programs in central Virginia. Semi-structured interviews were conducted to gather data via email, telephone, and face-to-face. A purposive sample of 24…

Testing Differential Holistic Processing Within a Face: No Evidence of Asymmetry from the Complete Composite Task.

PubMed

Shyi, Gary C-W; Wang, Chao-Chih

2016-01-01

The composite face task is one of the most popular research paradigms for measuring holistic processing of upright faces. The exact mechanism underlying holistic processing remains elusive and controversial, and some studies have suggested that holistic processing may not be evenly distributed, in that the top-half of a face might induce stronger holistic processing than its bottom-half counterpart. In two experiments, we further examined the possibility of asymmetric holistic processing. Prior to Experiment 1, we confirmed that perceptual discriminability was equated between top and bottom face halves; we found no differences in performance between top and bottom face halves when they were presented individually. Then, in Experiment 1, using the composite face task with the complete design to reduce response bias, we failed to obtain evidence that would support the notion of asymmetric holistic processing between top and bottom face halves. To further reduce performance variability and to remove lingering holistic effects observed in the misaligned condition in Experiment 1, we doubled the number of trials and increased misalignment between top and bottom face halves to make misalignment more salient in Experiment 2. Even with these additional manipulations, we were unable to find evidence indicative of asymmetric holistic processing. Taken together, these findings suggest that holistic processing is distributed homogenously within an upright face.

The effect of the buccal corridor and tooth display on smile attractiveness.

PubMed

Niaki, Esfandiar Akhavan; Arab, Sepideh; Shamshiri, Ahmadreza; Imani, Mohammad Moslem

2015-11-01

The aim of the present study was to evaluate the lay perception of the effect of the buccal corridor and amount of tooth-gingival display on the attractiveness of a smile in different facial types. Using Adobe Photoshop CS3 software, frontal facial images of two smiling Iranian female subjects (one short-faced and one long-faced) were altered to create different magnitudes of buccal corridor display (5, 10, 15, 20 and 25%) and tooth-gingival display (2 mm central incisor show, 6 mm central incisor show, total central incisor show, total tooth show with 2 mm gingival show and total tooth show with 4 mm gingival show). Sixty Iranians (30 males and 30 females) rated the attractiveness of the pictures on a 1-5 point scale. Narrower smiles were preferred in long-faced subjects compared with short-faced subjects. Minimal tooth show was more attractive than excessive gingival display in short-faced subjects. There were no gender specific, statistically significant differences found in the ratings given by the lay assessors. Harmonious geometry of the smile and face in both the vertical and transverse dimensions influences smile attractiveness and this should be considered in orthodontic treatment planning.

Composite treatment of ceramic tile armor

DOEpatents

Hansen, James G. R. [Oak Ridge, TN; Frame, Barbara J [Oak Ridge, TN

2010-12-14

An improved ceramic tile armor has a core of boron nitride and a polymer matrix composite (PMC) facing of carbon fibers fused directly to the impact face of the tile. A polyethylene fiber composite backing and spall cover are preferred. The carbon fiber layers are cured directly onto the tile, not adhered using a separate adhesive so that they are integral with the tile, not a separate layer.

Composite treatment of ceramic tile armor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, James G. R.; Frame, Barbara J

An improved ceramic tile armor has a core of boron nitride and a polymer matrix composite (PMC) facing of carbon fibers fused directly to the impact face of the tile. A polyethylene fiber composite backing and spall cover are preferred. The carbon fiber layers are cured directly onto the tile, not adhered using a separate adhesive so that they are integral with the tile, not a separate layer.

Faunistic Composition, Ecological Properties and Zoogeographical Composition of the Family Elateridae (Coleoptera) of the Central Anatolian Region of Turkey

PubMed Central

Kabalak, Mahmut; Sert, Osman

2011-01-01

The focus of this study was to understand the faunistic composition, ecological properties and zoogeographical composition of Elateridae (Coleoptera) of the Central Anatolian region. 72 species belonging to seven subfamilies and 25 genera were identified. The major part of the Elateridae fauna of the Central Anatolian region is formed by the subfamilies Elaterinae and Cardiophorinae. The genus Cardiophorus was the most species-rich genus. The species composition of the Elateridae fauna of the Central Anatolian region is partially consistent with known Elateridae fauna of Turkey. The Central Anatolian region shares most species with the European part of the Western Palaearctic as does the Elateridae fauna of Turkey. Detailed localities of nine species are given for the first time for Turkey, with emphasis on the Central Anatolian region. PMID:21864150

Exterior structural composite panels with southern pine veneer faces and cores of southern hardwood flakes

Treesearch

C. -Y. Hse

1976-01-01

One-half-inch-thick, 8tructural exterior composite panels of various constructions were made in a one-step process, with faces of eouthern pine veneer and corea of mixed southern hardwood flakes. The flakes were precisely machined to be 3/8-inch wide, 3 inches long and 0.015 inch thick. Two veneer, cross-laminated on each face over an oriented flake core, yielded the...

Face Allotransplantation and Burns: a Review

PubMed Central

A, Arno; JP, Barret; RA, Harrison; MG, Jeschke

2012-01-01

Burns may represent one of the main indications for face allotransplantation. Severely disfigured faces featuring a devastating appearance and great functional impairments are not only seen as burn sequelae, but also occur as a result of other traumatic injuries, oncological surgical resections, benign tumors (e.g., neurofibromatosis), and major congenital malformations. To date, sixteen human face composite tissue allotransplantations have been performed with success. Despite the initial scepticism about its applicability, due mainly to ethical and technical reasons, the previous worldwide cases and their associated positive outcomes –including acceptable immunosuppressive regimens, excellent aesthetic and functional results, and good psychological acceptance by the recipient- , enable the conclusion that face composite tissue allotransplantation has become another therapeutic strategy in the reconstructive surgical armamentarium, which bears special consideration when dealing with severely disfigured burned patients. The aim of this review is to describe the basics of face composite tissue allotransplantation and give an overview of some of the cases performed until now, with special attention paid to debating the pros and cons of its applicability in burn patients. PMID:22274632

Optimal Damping Behavior of a Composite Sandwich Beam Reinforced with Coated Fibers

NASA Astrophysics Data System (ADS)

Lurie, S.; Solyaev, Y.; Ustenko, A.

2018-04-01

In the present paper, the effective damping properties of a symmetric foam-core sandwich beam with composite face plates reinforced with coated fibers is studied. A glass fiber-epoxy composite with additional rubber-toughened epoxy coatings on the fibers is considered as the material of the face plates. A micromechanical analysis of the effective properties of the unidirectional lamina is conducted based on the generalized self-consistent method and the viscoelastic correspondence principle. The effective complex moduli of composite face plates with a symmetric angle-ply structure are evaluated based on classical lamination theory. A modified Mead-Markus model is utilized to evaluate the fundamental modal loss factor of a simply supported sandwich beam with a polyurethane core. The viscoelastic frequency-dependent behaviors of the core and face plate materials are both considered. The properties of the face plates are evaluated based on a micromechanical analysis and found to implicitly depend on frequency; thus, an iterative procedure is applied to find the natural frequencies of the lateral vibrations of the beam. The optimal values of the coating thickness, lamination angle and core thickness for the best multi-scale damping behavior of the beam are found.

Evaluation of experimental methods for determining dynamic stiffness and damping of composite materials

NASA Technical Reports Server (NTRS)

Bert, C. W.; Clary, R. R.

1974-01-01

Various methods potentially usable for determining dynamic stiffness and damping of composite materials are reviewed. Of these, the following most widely used techniques are singled out for more detailed discussion: free vibration, pulse propagation, and forced vibration response. To illustrate the usefulness and validity of dynamic property data, their application in dynamic analyses and comparison with measured structural response are described for the following composite-material structures: free-free sandwich beam with glass-epoxy facings, clamped-edge sandwich plate with similar facings, free-end sandwich conical shell with similar facings, and boron-epoxy free plate with layers arranged at various orientations.

Anxiety and Sensitivity to Eye Gaze in Emotional Faces

ERIC Educational Resources Information Center

Holmes, Amanda; Richards, Anne; Green, Simon

2006-01-01

This paper reports three studies in which stronger orienting to perceived eye gaze direction was revealed when observers viewed faces showing fearful or angry, compared with happy or neutral, emotional expressions. Gaze-related spatial cueing effects to laterally presented fearful faces and centrally presented angry faces were also modulated by…

Attractiveness bias: A cognitive explanation.

PubMed

Schein, Stevie S; Trujillo, Logan T; Langlois, Judith H

2017-01-01

According to cognitive averaging theory, preferences for attractive faces result from their similarity to facial prototypes, the categorical central tendencies of a population of faces. Prototypical faces are processed more fluently, resulting in increased positive affect in the viewer.

Compositional effects on the ignition of FACE gasolines [Compositional effects on the ignition of FACE gasoline fuels: experiments, surrogate fuel formulation, and chemical kinetic modeling

DOE PAGES

Sarathy, S. Mani; Kukkadapu, Goutham; Mehl, Marco; ...

2016-05-08

As regulatory measures for improved fuel economy and decreased emissions are pushing gasoline engine combustion technologies towards extreme conditions (i.e., boosted and intercooled intake with exhaust gas recirculation), fuel ignition characteristics become increasingly important for enabling stable operation. Here, this study explores the effects of chemical composition on the fundamental ignition behavior of gasoline fuels. Two well-characterized, high-octane, non-oxygenated FACE (Fuels for Advanced Combustion Engines) gasolines, FACE F and FACE G, having similar antiknock indices but different octane sensitivities and chemical compositions are studied. Ignition experiments were conducted in shock tubes and a rapid compression machine (RCM) at nominal pressuresmore » of 20 and 40 atm, equivalence ratios of 0.5 and 1.0, and temperatures ranging from 650 to 1270 K. Results at temperatures above 900 K indicate that ignition delay time is similar for these fuels. However, RCM measurements below 900 K demonstrate a stronger negative temperature coefficient behavior for FACE F gasoline having lower octane sensitivity. In addition, RCM pressure profiles under two-stage ignition conditions illustrate that the magnitude of low-temperature heat release (LTHR) increases with decreasing fuel octane sensitivity. However, intermediate-temperature heat release is shown to increase as fuel octane sensitivity increases. Various surrogate fuel mixtures were formulated to conduct chemical kinetic modeling, and complex multicomponent surrogate mixtures were shown to reproduce experimentally observed trends better than simpler two- and three-component mixtures composed of n-heptane, iso-octane, and toluene. Measurements in a Cooperative Fuels Research (CFR) engine demonstrated that the multicomponent surrogates accurately captured the antiknock quality of the FACE gasolines. Simulations were performed using multicomponent surrogates for FACE F and G to reveal the underlying chemical kinetics linking fuel composition with ignition characteristics. Finally, a key discovery of this work is the kinetic coupling between aromatics and naphthenes, which affects the radical pool population and thereby controls ignition.« less

Compositional effects on the ignition of FACE gasolines [Compositional effects on the ignition of FACE gasoline fuels: experiments, surrogate fuel formulation, and chemical kinetic modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarathy, S. Mani; Kukkadapu, Goutham; Mehl, Marco

As regulatory measures for improved fuel economy and decreased emissions are pushing gasoline engine combustion technologies towards extreme conditions (i.e., boosted and intercooled intake with exhaust gas recirculation), fuel ignition characteristics become increasingly important for enabling stable operation. Here, this study explores the effects of chemical composition on the fundamental ignition behavior of gasoline fuels. Two well-characterized, high-octane, non-oxygenated FACE (Fuels for Advanced Combustion Engines) gasolines, FACE F and FACE G, having similar antiknock indices but different octane sensitivities and chemical compositions are studied. Ignition experiments were conducted in shock tubes and a rapid compression machine (RCM) at nominal pressuresmore » of 20 and 40 atm, equivalence ratios of 0.5 and 1.0, and temperatures ranging from 650 to 1270 K. Results at temperatures above 900 K indicate that ignition delay time is similar for these fuels. However, RCM measurements below 900 K demonstrate a stronger negative temperature coefficient behavior for FACE F gasoline having lower octane sensitivity. In addition, RCM pressure profiles under two-stage ignition conditions illustrate that the magnitude of low-temperature heat release (LTHR) increases with decreasing fuel octane sensitivity. However, intermediate-temperature heat release is shown to increase as fuel octane sensitivity increases. Various surrogate fuel mixtures were formulated to conduct chemical kinetic modeling, and complex multicomponent surrogate mixtures were shown to reproduce experimentally observed trends better than simpler two- and three-component mixtures composed of n-heptane, iso-octane, and toluene. Measurements in a Cooperative Fuels Research (CFR) engine demonstrated that the multicomponent surrogates accurately captured the antiknock quality of the FACE gasolines. Simulations were performed using multicomponent surrogates for FACE F and G to reveal the underlying chemical kinetics linking fuel composition with ignition characteristics. Finally, a key discovery of this work is the kinetic coupling between aromatics and naphthenes, which affects the radical pool population and thereby controls ignition.« less

Review of the bioenvironmental methods for malaria control with special reference to the use of larvivorous fishes and composite fish culture in central Gujarat, India.

PubMed

Kant, Rajni; Haq, S; Srivastava, H C; Sharma, V P

2013-03-01

Mosquito control with the use of insecticides is faced with the challenges of insecticide resistance in disease vectors, community refusal, their high cost, operational difficulties, and environmental concern. In view of this, integrated vector control strategies with the use of larvivorous fishes such as Guppy (Poecilia reticulata) and Gambusia (G. affinis) as biological control agents were used in controlling mosquito breeding in different types of breeding places such as intradomestic containers, various types of wells, rice-fields, pools, ponds and elsewhere in malaria prone rural areas of central Gujarat. Attempts were also made to demonstrate composite fish culture in unused abandoned village ponds by culturing Guppy along with the food fishes such as Rohu (Labeo rohita), Catla (Catla catla) and Mrigal (Cirrhinus mrigala). Income generated from these ponds through sale of fishes was utilized for mosquito control and village development. The technology was later adopted by the villagers themselves and food fish culture was practised in 23 ponds which generated an income of Rs 1,02,50,992 between 1985 and 2008. The number of villages increased from 13 to 23 in 2008 and there was also gradual increase of income from Rs 3,66,245 in 1985-90 to Rs 55,06,127 in 2002-08 block. It is concluded that larvivorous fishes can be useful tool in controlling mosquito breeding in certain situations and their use along with composite fish culture may also generate income to make the programme self-sustainable.

PARACENTRAL ACUTE MIDDLE MACULOPATHY IN A PERIVENULAR FERN-LIKE DISTRIBUTION WITH EN FACE OPTICAL COHERENCE TOMOGRAPHY.

PubMed

Garrity, Sean T; Tseng, Victoria L; Sarraf, David

2017-11-22

To report a case of central retinal vein occlusion resulting in a perivenular pattern of paracentral acute middle maculopathy lesions best identified with en face optical coherence tomography (OCT). Retrospective case report. Optos ultra-widefield fluorescein angiography, spectral domain OCT, en face OCT, and OCT angiography were performed. A 41-year-old man presented with decreased vision in the right eye for 2 weeks. Funduscopic examination of the affected right eye was notable for subtle retinal whitening in the macula, mild retinal venous dilation and tortuosity, and few scattered retinal dot and blot hemorrhages consistent with an acute central retinal vein occlusion. Widefield fluorescein angiography demonstrated delayed arterial and venous filling but no evidence of significant peripheral retinal vascular ischemia. En face OCT segmented at the inner nuclear layer illustrated a remarkable and precise perivenular distribution of fern-like paracentral acute middle maculopathy with periarterial sparing, whereas en face OCT segmented at the outer nuclear layer demonstrated florid cystoid macular edema. At 6-week follow-up, OCT demonstrated patchy areas of atrophic inner nuclear layer and spontaneous resolution of the cystoid macular edema. Optical coherence tomography angiography at the level of the deep capillary plexus illustrated remarkable flow reduction of the deep capillary plexus in mainly a perivenular distribution. The authors report a case of a central retinal vein occlusion with mild retinal findings associated with a remarkable perivenular pattern of paracentral acute middle maculopathy with en face OCT. Follow-up OCT angiography demonstrated significant flow reduction of the deep capillary plexus in a perivenular pattern. The perivenular pattern of paracentral acute middle maculopathy lesions with en face OCT can be an important finding suggestive of a central retinal vein occlusion.

Parallel approaches to composite production: interfaces that behave contrary to expectation.

PubMed

Frowd, Charlie D; Bruce, Vicki; Ness, Hayley; Bowie, Leslie; Paterson, Jenny; Thomson-Bogner, Claire; McIntyre, Alexander; Hancock, Peter J B

2007-04-01

This paper examines two facial composite systems that present multiple faces during construction to more closely resemble natural face processing. A 'parallel' version of PRO-fit was evaluated, which presents facial features in sets of six or twelve, and EvoFIT, a system in development, which contains a holistic face model and an evolutionary interface. The PRO-fit parallel interface turned out not to be quite as good as the 'serial' version as it appeared to interfere with holistic face processing. Composites from EvoFIT were named almost three times better than PRO-fit, but a benefit emerged under feature encoding, suggesting that recall has a greater role for EvoFIT than was previously thought. In general, an advantage was found for feature encoding, replicating a previous finding in this area, and also for a novel 'holistic' interview.

The Effect of Self-Referential Expectation on Emotional Face Processing

PubMed Central

McKendrick, Mel; Butler, Stephen H.; Grealy, Madeleine A.

2016-01-01

The role of self-relevance has been somewhat neglected in static face processing paradigms but may be important in understanding how emotional faces impact on attention, cognition and affect. The aim of the current study was to investigate the effect of self-relevant primes on processing emotional composite faces. Sentence primes created an expectation of the emotion of the face before sad, happy, neutral or composite face photos were viewed. Eye movements were recorded and subsequent responses measured the cognitive and affective impact of the emotion expressed. Results indicated that primes did not guide attention, but impacted on judgments of valence intensity and self-esteem ratings. Negative self-relevant primes led to the most negative self-esteem ratings, although the effect of the prime was qualified by salient facial features. Self-relevant expectations about the emotion of a face and subsequent attention to a face that is congruent with these expectations strengthened the affective impact of viewing the face. PMID:27175487

The Effect of Self-Referential Expectation on Emotional Face Processing.

PubMed

McKendrick, Mel; Butler, Stephen H; Grealy, Madeleine A

2016-01-01

The role of self-relevance has been somewhat neglected in static face processing paradigms but may be important in understanding how emotional faces impact on attention, cognition and affect. The aim of the current study was to investigate the effect of self-relevant primes on processing emotional composite faces. Sentence primes created an expectation of the emotion of the face before sad, happy, neutral or composite face photos were viewed. Eye movements were recorded and subsequent responses measured the cognitive and affective impact of the emotion expressed. Results indicated that primes did not guide attention, but impacted on judgments of valence intensity and self-esteem ratings. Negative self-relevant primes led to the most negative self-esteem ratings, although the effect of the prime was qualified by salient facial features. Self-relevant expectations about the emotion of a face and subsequent attention to a face that is congruent with these expectations strengthened the affective impact of viewing the face.

Holistic Processing of Faces: Perceptual and Decisional Components

ERIC Educational Resources Information Center

Richler, Jennifer J.; Gauthier, Isabel; Wenger, Michael J.; Palmeri, Thomas J.

2008-01-01

Researchers have used several composite face paradigms to assess holistic processing of faces. In the selective attention paradigm, participants decide whether one face part (e.g., top) is the same as a previously seen face part. Their judgment is affected by whether the irrelevant part of the test face is the same as or different than the…

Impaired holistic processing in congenital prosopagnosia

PubMed Central

Avidan, Galia; Tanzer, Michal; Behrmann, Marlene

2011-01-01

It has long been argued that face processing requires disproportionate reliance on holistic or configural processing, relative to that required for non-face object recognition, and that a disruption of such holistic processing may be causally implicated in prosopagnosia. Previously, we demonstrated that individuals with congenital prosopagnosia (CP) did not show the normal face inversion effect (better performance for upright compared to inverted faces) and evinced a local (rather than the normal global) bias in a compound letter global/local (GL) task, supporting the claim of disrupted holistic processing in prosopagnosia. Here, we investigate further the nature of holistic processing impairments in CP, first by confirming, in a large sample of CP individuals, the absence of the normal face inversion effect and the presence of the local bias on the GL task, and, second, by employing the composite face paradigm, often regarded as the gold standard for measuring holistic face processing. In this last task, we show that, in contrast with normal individuals, the CP group perform equivalently with aligned and misaligned faces and was impervious to (the normal) interference from the task-irrelevant bottom part of faces. Interestingly, the extent of the local bias evident in the composite task is correlated with the abnormality of performance on diagnostic face processing tasks. Furthermore, there is a significant correlation between the magnitude of the local bias in the GL and performance on the composite task. These results provide further evidence for impaired holistic processing in CP and, moreover, corroborate the critical role of this type of processing for intact face recognition. PMID:21601583

Optical device with conical input and output prism faces

DOEpatents

Brunsden, Barry S.

1981-01-01

A device for radially translating radiation in which a right circular cylinder is provided at each end thereof with conical prism faces. The faces are oppositely extending and the device may be severed in the middle and separated to allow access to the central part of the beam. Radiation entering the input end of the device is radially translated such that radiation entering the input end at the perimeter is concentrated toward the output central axis and radiation at the input central axis is dispersed toward the output perimeter. Devices are disclosed for compressing beam energy to enhance drilling techniques, for beam manipulation of optical spatial frequencies in the Fourier plane and for simplification of dark field and color contrast microscopy. Both refracting and reflecting devices are disclosed.

Modeling Cooperation in an Address-Register-Based Telephone/Face-to-Face Survey

ERIC Educational Resources Information Center

Lipps, Oliver

2016-01-01

I analyze the effects of household sociodemography, interviewer performance in the current survey, and fieldwork characteristics on cooperation in a central telephone survey, where households with no publicly listed landline number receive face-to-face visits. Using the 2013 refreshment sample of the Swiss Household Panel, I employ…

Composite pipe to metal joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leslie, James C.; Leslie, II, James C.; Heard, James

A method for making a metal to composite tube joint including selecting an elongated interior fitting constructed with an exterior barrel, reduced in exterior diameter to form a distally facing annular shoulder and then projecting still further distally to form an interior sleeve having a radially outwardly facing bonding surface. Selecting an elongated metal outer sleeve formed proximally with a collar constructed for receipt over the barrel and increased in interior diameter and projecting distally to form an exterior sleeve having a radially inwardly facing bonding surface cooperating with the first bonding surface to form an annulus receiving an extremitymore » of a composite tube and a bond bonding the extremity of the tube to the bonding surfaces.« less

Polyaspartate extraction of cadmium ions from contaminated soil: Evaluation and optimization using central composite design.

PubMed

Mu'azu, Nuhu Dalhat; Haladu, Shamsuddeen A; Jarrah, Nabeel; Zubair, Mukarram; Essa, Mohammad H; Ali, Shaikh A

2018-01-15

The occurrences of heavy metal contaminated sites and soils and the need for devising environmentally friendly solutions have become global issues of serious concern. In this study, polyaspartate (a highly biodegradable agent) was synthesized using L-Aspartic acid via a new modified thermal procedure and employed for extraction of cadmium ions (Cd) from contaminated soil. Response surface methodology approach using 3 5 full faced centered central composite design was employed for modeling, evaluating and optimizing the influence of polyaspartate concentration (36-145mM), polyaspartate/soil ratio (5-25), initial heavy metal concentration (100-500mg/kg), initial pH (3-6) and extraction time (6-24h) on Cd ions extracted into the polyaspartate solution and its residual concentration in the treated soil. The Cd extraction efficacy obtained reached up to 98.8%. Increase in Cd extraction efficiency was associated with increase in the polyaspartate and Cd concentration coupled with lower polyaspertate/soil ratio and initial pH. Under the optimal conditions characterized with minimal utilization of the polyaspartate and high Cd ions removal, the extractible Cd in the polyaspartate solution reached up to 84.4mg/L which yielded 85% Cd extraction efficacy. This study demonstrates the suitability of using polyaspartate as an effective environmentally friendly chelating agent for Cd extraction from contaminated soils. Copyright © 2017 Elsevier B.V. All rights reserved.

Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

NASA Technical Reports Server (NTRS)

Ko, William L.; Jackson, Raymond H.

1993-01-01

Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

Challenges Facing Managers in Managing Conflict in Schools in the South and South Central Regions of Botswana

ERIC Educational Resources Information Center

Morake, Nnior Machomi; Monobe, Ratau John; Dingwe, Stephonia

2011-01-01

The purpose of this study was to examine the challenges facing managers in managing conflict in schools of South and South Central Regions of Botswana. In this study, the schedule of interview was used to collect empirical data. A random sample of 50 school managers and deputy school managers was selected for interviews. Major findings of the…

Validation of the Vanderbilt Holistic Face Processing Test.

PubMed

Wang, Chao-Chih; Ross, David A; Gauthier, Isabel; Richler, Jennifer J

2016-01-01

The Vanderbilt Holistic Face Processing Test (VHPT-F) is a new measure of holistic face processing with better psychometric properties relative to prior measures developed for group studies (Richler et al., 2014). In fields where psychologists study individual differences, validation studies are commonplace and the concurrent validity of a new measure is established by comparing it to an older measure with established validity. We follow this approach and test whether the VHPT-F measures the same construct as the composite task, which is group-based measure at the center of the large literature on holistic face processing. In Experiment 1, we found a significant correlation between holistic processing measured in the VHPT-F and the composite task. Although this correlation was small, it was comparable to the correlation between holistic processing measured in the composite task with the same faces, but different target parts (top or bottom), which represents a reasonable upper limit for correlations between the composite task and another measure of holistic processing. These results confirm the validity of the VHPT-F by demonstrating shared variance with another measure of holistic processing based on the same operational definition. These results were replicated in Experiment 2, but only when the demographic profile of our sample matched that of Experiment 1.

Validation of the Vanderbilt Holistic Face Processing Test

PubMed Central

Wang, Chao-Chih; Ross, David A.; Gauthier, Isabel; Richler, Jennifer J.

2016-01-01

The Vanderbilt Holistic Face Processing Test (VHPT-F) is a new measure of holistic face processing with better psychometric properties relative to prior measures developed for group studies (Richler et al., 2014). In fields where psychologists study individual differences, validation studies are commonplace and the concurrent validity of a new measure is established by comparing it to an older measure with established validity. We follow this approach and test whether the VHPT-F measures the same construct as the composite task, which is group-based measure at the center of the large literature on holistic face processing. In Experiment 1, we found a significant correlation between holistic processing measured in the VHPT-F and the composite task. Although this correlation was small, it was comparable to the correlation between holistic processing measured in the composite task with the same faces, but different target parts (top or bottom), which represents a reasonable upper limit for correlations between the composite task and another measure of holistic processing. These results confirm the validity of the VHPT-F by demonstrating shared variance with another measure of holistic processing based on the same operational definition. These results were replicated in Experiment 2, but only when the demographic profile of our sample matched that of Experiment 1. PMID:27933014

Instrument and method for focusing x rays, gamma rays, and neutrons

DOEpatents

Smither, R.K.

1981-04-20

A crystal diffraction instrument is described which has an improved crystalline structure having a face for receiving a beam of photons or neutrons and diffraction planar spacing along that face with the spacing increasing progressively along the face to provide a decreasing Bragg angle and thereby increasing the usable area and acceptance angle. The increased planar spacing is provided by the use of a temperature differential across the crystalline structure, by assembling a plurality of crystalline structure with different compositions, by an individual crystalline structure with a varying composition and thereby a changing planar spacing along its face, and by combinations of these techniques.

Understanding the hydrologic and geochemical control of regolith formation on shale in a hilly landscape

NASA Astrophysics Data System (ADS)

Xiao, D.; Brantley, S.; Li, L.

2017-12-01

Chemical weathering transforms rock to soil and determine soil texture, bedrock depth, and soil hydrological properties. At the Shale Hills watershed in central Pennsylvania, field evidence indicated that the regolith depth, hydrologic processes, and chemical depletion are different at the two aspects. Current regolith formation models considering reactive transport processes have a limitation in coupling complex and evolving hydrodynamic conditions. We hypothesize that deeper regolith forms when more water flushes dissolved mass out of the system. The hypothesis is tested by developing a two-dimensional regolith formation model at the hillslope scale using measured mineral composition and hydrologic properties at Shale Hills using CrunchFlow. A 2-D hillslope domain was setup to simulate hydrogeochemical processes at north and south aspects and to understand the evolution of hydrodynamics, rock properties, and extent of chemical reactions. The bedrock has the primary minerals of quartz, illite, chlorite, calcite, and pyrite; goethite and kaolinite precipitated as secondary minerals. The permeability, mass transfer, and groundwater table depth were constrained by field measurement. We implemented different recharge rates on north and south aspects based on the annually averaged fluxes from a current reanalysis using a hydrologic model. The simulation started from a homogeneous bedrock composition at 10,000 years ago. After 10,000 years' weathering, the south facing aspect with small recharge rate has a shallower soil and regolith. The simulation output indicates the formation of a shallow and a deep groundwater, based on the formation of lateral flow that connects to the stream. One is at the interface between high permeability soil zone and low permeability regolith zone, forming a relatively high-velocity perched groundwater layer. The remnant water infiltrates into the deeper low permeability zone and forms the regional groundwater layer. Because of high permeability in perched layer on north facing aspect, the remnant water in regional groundwater layer leads to shallower water table depth on north facing aspect. The model will be used to understand the role fractures, climate, and mineral compositions in affecting regolith formation.

Coal planer. [13 claims

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahre, K.; Nowak, H.D.

1977-05-24

A coal planer for use in an underground mine gallery comprises a central unit, a pair of loading heads arranged spaced from and to opposite sides of the central unit and a pair of intermediate units, respectively, located between the central unit and the loading heads and linked to the latter and the central unit. Each of the intermediate units is provided with a plurality of planning knives arranged vertically spaced from each other for cutting coal from the mine face during reciprocation of the coal planer in a direction parallel to the mine face, and with a bottom knifemore » adapted to cut into the sole of the mine gallery. 13 claims, 5 figures.« less

Fiber Composite Sandwich Thermostructural Behavior: Computational Simulation

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Aiello, R. A.; Murthy, P. L. N.

1986-01-01

Several computational levels of progressive sophistication/simplification are described to computationally simulate composite sandwich hygral, thermal, and structural behavior. The computational levels of sophistication include: (1) three-dimensional detailed finite element modeling of the honeycomb, the adhesive and the composite faces; (2) three-dimensional finite element modeling of the honeycomb assumed to be an equivalent continuous, homogeneous medium, the adhesive and the composite faces; (3) laminate theory simulation where the honeycomb (metal or composite) is assumed to consist of plies with equivalent properties; and (4) derivations of approximate, simplified equations for thermal and mechanical properties by simulating the honeycomb as an equivalent homogeneous medium. The approximate equations are combined with composite hygrothermomechanical and laminate theories to provide a simple and effective computational procedure for simulating the thermomechanical/thermostructural behavior of fiber composite sandwich structures.

Nondestructive Evaluation (NDE) for Inspection of Composite Sandwich Structures

NASA Technical Reports Server (NTRS)

Zalameda, Joseph N.; Parker, F. Raymond

2014-01-01

Composite honeycomb structures are widely used in aerospace applications due to their low weight and high strength advantages. Developing nondestructive evaluation (NDE) inspection methods are essential for their safe performance. Flash thermography is a commonly used technique for composite honeycomb structure inspections due to its large area and rapid inspection capability. Flash thermography is shown to be sensitive for detection of face sheet impact damage and face sheet to core disbond. Data processing techniques, using principal component analysis to improve the defect contrast, are discussed. Limitations to the thermal detection of the core are investigated. In addition to flash thermography, X-ray computed tomography is used. The aluminum honeycomb core provides excellent X-ray contrast compared to the composite face sheet. The X-ray CT technique was used to detect impact damage, core crushing, and skin to core disbonds. Additionally, the X-ray CT technique is used to validate the thermography results.

Looking at faces from different angles: Europeans fixate different features in Asian and Caucasian faces.

PubMed

Brielmann, Aenne A; Bülthoff, Isabelle; Armann, Regine

2014-07-01

Race categorization of faces is a fast and automatic process and is known to affect further face processing profoundly and at earliest stages. Whether processing of own- and other-race faces might rely on different facial cues, as indicated by diverging viewing behavior, is much under debate. We therefore aimed to investigate two open questions in our study: (1) Do observers consider information from distinct facial features informative for race categorization or do they prefer to gain global face information by fixating the geometrical center of the face? (2) Does the fixation pattern, or, if facial features are considered relevant, do these features differ between own- and other-race faces? We used eye tracking to test where European observers look when viewing Asian and Caucasian faces in a race categorization task. Importantly, in order to disentangle centrally located fixations from those towards individual facial features, we presented faces in frontal, half-profile and profile views. We found that observers showed no general bias towards looking at the geometrical center of faces, but rather directed their first fixations towards distinct facial features, regardless of face race. However, participants looked at the eyes more often in Caucasian faces than in Asian faces, and there were significantly more fixations to the nose for Asian compared to Caucasian faces. Thus, observers rely on information from distinct facial features rather than facial information gained by centrally fixating the face. To what extent specific features are looked at is determined by the face's race. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Improving the Quality of Facial Composites Using a Holistic Cognitive Interview

ERIC Educational Resources Information Center

Frowd, Charlie D.; Bruce, Vicki; Smith, Ashley J.; Hancock, Peter J. B.

2008-01-01

Witnesses to and victims of serious crime are normally asked to describe the appearance of a criminal suspect, using a Cognitive Interview (CI), and to construct a facial composite, a visual representation of the face. Research suggests that focusing on the global aspects of a face, as opposed to its facial features, facilitates recognition and…

Method of making a composite tube to metal joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leslie, James C.; Leslie, II, James C.; Heard, James

A method for making a metal to composite tube joint including selecting an elongated interior fitting constructed with an exterior barrel, reduced in exterior diameter to form a distally facing annular shoulder and then projecting still further distally to form an interior sleeve having a radially outwardly facing bonding surface. Selecting an elongated metal outer sleeve formed proximally with a collar constructed for receipt over the barrel and increased in interior diameter and projecting distally to form an exterior sleeve having a radially inwardly facing bonding surface cooperating with the first bonding surface to form an annulus receiving an extremitymore » of a composite tube and a bond bonding the extremity of the tube to the bonding surfaces.« less

Topographically-controlled site conditions drive vegetation pattern on inland dunes in Poland

NASA Astrophysics Data System (ADS)

Sewerniak, Piotr; Jankowski, Michał

2017-07-01

The inland dunes of Central Europe are commonly overplanted by Scots pine (Pinus sylvestris) monocultures in which the primary occurrence of the natural vegetation pattern is obliterated. We hypothesize that on naturally revegetated inland dunes the pattern is clear and driven by topographically-controlled site conditions. To test this hypothesis, we addressed the following research questions: (1) Does topography drive vegetation patterns on inland dunes and if so, what are main differences between vegetation in varying relief positions? (2) To what extent does topography involve the variability of microclimates and of soil properties, and how does the topographically-induced differentiation of these site conditions control vegetation patterns? We conducted interdisciplinary studies (applying floristic, pedological and microclimatic research techniques) on a naturally revegetated inland dune area situated on a military artillery training ground near Toruń, northern Poland. We investigated vegetation patterns with reference to three topographical position variants (north-facing slopes, south-facing slopes, and intra-dune depressions). We found distinct differences in vegetation characteristics covering the aforementioned topographical positions. This primarily concerned species composition of ground vegetation: Calluna vulgaris was dominant species on north-facing slopes, Corynephorus canescens on south-facing slopes, while Calamagrostis epigejos in intra-dune depressions. In comparison to dune slopes, the depressions were characterized by much higher biodiversity of vascular plant species. This followed the most favorable soil conditions for the existence of plants (higher moisture and nutrient pools) occurring in low topographical positions. However, tree succession was most advanced not in depressions, where the competitive impact of tall grasses on seedlings was recognized, but on north-facing slopes. Based on our results, we formulated some suggestions, which could be useful for both practical foresters to increase biodiversity of ecosystems and for practices that work on the fixation of dunes by restoring vegetation.

Dissociated neural basis of two behavioral hallmarks of holistic face processing: The whole-part effect and composite-face effect.

PubMed

Li, Jin; Huang, Lijie; Song, Yiying; Liu, Jia

2017-07-28

It has been long proposed that our extraordinary face recognition ability stems from holistic face processing. Two widely-used behavioral hallmarks of holistic face processing are the whole-part effect (WPE) and composite-face effect (CFE). However, it remains unknown whether these two effects reflect similar or different aspects of holistic face processing. Here we investigated this question by examining whether the WPE and CFE involved shared or distinct neural substrates in a large sample of participants (N=200). We found that the WPE and CFE showed hemispheric dissociation in the fusiform face area (FFA), that is, the WPE was correlated with face selectivity in the left FFA, while the CFE was correlated with face selectivity in the right FFA. Further, the correlation between the WPE and face selectivity was largely driven by the FFA response to faces, whereas the association between the CFE and face selectivity resulted from suppressed response to objects in the right FFA. Finally, we also observed dissociated correlation patterns of the WPE and CFE in other face-selective regions and across the whole brain. These results suggest that the WPE and CFE may reflect different aspects of holistic face processing, which shed new light on the behavioral dissociations of these two effects demonstrated in literature. Copyright © 2017 Elsevier Ltd. All rights reserved.

Holistic Face Processing Is Mature at 4 Years of Age: Evidence from the Composite Face Effect

ERIC Educational Resources Information Center

de Heering, Adelaide; Houthuys, Sarah; Rossion, Bruno

2007-01-01

Although it is acknowledged that adults integrate features into a representation of the whole face, there is still some disagreement about the onset and developmental course of holistic face processing. We tested adults and children from 4 to 6 years of age with the same paradigm measuring holistic face processing through an adaptation of the…

Expertise Increases the Functional Overlap between Face and Object Perception

ERIC Educational Resources Information Center

McKeeff, Thomas J.; McGugin, Rankin W.; Tong, Frank; Gauthier, Isabel

2010-01-01

Recent studies indicate that expertise with objects can interfere with face processing. Although competition occurs between faces and objects of expertise, it remains unclear whether this reflects an expertise-specific bottleneck or the fact that objects of expertise grab attention and thereby consume more central resources. We investigated the…

Selective Interference on the Holistic Processing of Faces in Working Memory

ERIC Educational Resources Information Center

Cheung, Olivia S.; Gauthier, Isabel

2010-01-01

Faces and objects of expertise compete for early perceptual processes and holistic processing resources (Gauthier, Curran, Curby, & Collins, 2003). Here, we examined the nature of interference on holistic face processing in working memory by comparing how various types of loads affect selective attention to parts of face composites. In dual…

Amygdala reactivity to fearful faces correlates positively with impulsive aggression.

PubMed

da Cunha-Bang, Sofi; Fisher, Patrick M; Hjordt, Liv V; Holst, Klaus; Knudsen, Gitte M

2018-01-07

Facial expressions robustly activate the amygdala, a brain structure playing a critical role in aggression. Whereas previous studies suggest that amygdala reactivity is related to various measures of impulsive aggression, we here estimate a composite measure of impulsive aggression and evaluate whether it is associated with amygdala reactivity to angry and fearful faces. We estimated amygdala reactivity with functional magnetic resonance imaging in 47 men with varying degree of aggressive traits (19 incarcerated violent offenders and 28 healthy controls). We modeled a composite "impulsive aggression" trait construct (LV agg ) using a linear structural equation model, with a single latent variable capturing the shared correlation between five self-report measures of trait aggression, anger and impulsivity. We tested for associations between amygdala reactivity and the LV agg , adjusting for age and group. The LV agg was significantly positively associated with amygdala reactivity to fearful (p = 0.001), but not angry faces (p = 0.9). We found no group difference in amygdala reactivity to fearful or angry faces. The findings suggest that that amygdala reactivity to fearful faces is represented by a composite index of impulsive aggression and provide evidence that impulsive aggression is associated with amygdala reactivity in response to submissive cues, i.e., fearful faces.

Site occupancy of interstitial deuterium atoms in face-centred cubic iron

PubMed Central

Machida, Akihiko; Saitoh, Hiroyuki; Sugimoto, Hidehiko; Hattori, Takanori; Sano-Furukawa, Asami; Endo, Naruki; Katayama, Yoshinori; Iizuka, Riko; Sato, Toyoto; Matsuo, Motoaki; Orimo, Shin-ichi; Aoki, Katsutoshi

2014-01-01

Hydrogen composition and occupation state provide basic information for understanding various properties of the metal–hydrogen system, ranging from microscopic properties such as hydrogen diffusion to macroscopic properties such as phase stability. Here the deuterization process of face-centred cubic Fe to form solid-solution face-centred cubic FeDx is investigated using in situ neutron diffraction at high temperature and pressure. In a completely deuterized specimen at 988 K and 6.3 GPa, deuterium atoms occupy octahedral and tetrahedral interstitial sites with an occupancy of 0.532(9) and 0.056(5), respectively, giving a deuterium composition x of 0.64(1). During deuterization, the metal lattice expands approximately linearly with deuterium composition at a rate of 2.21 Å3 per deuterium atom. The minor occupation of the tetrahedral site is thermally driven by the intersite movement of deuterium atoms along the ‹111› direction in the face-centred cubic metal lattice. PMID:25256789

Holistic face representation is highly orientation-specific.

PubMed

Rosenthal, Gideon; Levakov, Gidon; Avidan, Galia

2017-09-29

It has long been argued that face processing requires disproportionate reliance on holistic processing (HP), relative to that required for nonface object recognition. Nevertheless, whether the holistic nature of face perception is achieved via a unique internal representation or by the employment of an automated attention mechanism is still debated. Previous studies had used the face inversion effect (FIE), a unique face-processing marker, or the face composite task, a gold standard paradigm measuring holistic processing, to examine the validity of these two different hypotheses, with some studies combining the two paradigms. However, the results of such studies remain inconclusive, particularly pertaining to the issue of the two proposed HP mechanisms-an internal representation as opposed to an automated attention mechanism. Here, using the complete composite paradigm design, we aimed to examine whether face rotation yields a nonlinear or a linear drop in HP, thus supporting an account that face processing is based either on an orientation-dependent internal representation or on automated attention. Our results reveal that even a relatively small perturbation in face orientation (30 deg away from upright) already causes a sharp decline in HP. These findings support the face internal representation hypothesis and the notion that the holistic processing of faces is highly orientation-specific.

Effects of hurdle technology on Monascus ruber growth in green table olives: a response surface methodology approach.

PubMed

Cappato, Leandro P; Martins, Amanda M Dias; Ferreira, Elisa H R; Rosenthal, Amauri

An ascomycetes fungus was isolated from brine storage of green olives of the Arauco cultivar imported from Argentina and identified as Monascus ruber. The combined effects of different concentrations of sodium chloride (3.5-5.5%), sodium benzoate (0-0.1%), potassium sorbate (0-0.05%) and temperature (30-40°C) were investigated on the growth of M. ruber in the brine of stored table olives using a response surface methodology. A full 2 4 factorial design with three central points was first used in order to screen for the important factors (significant and marginally significant factors) and then a Face-Centered Central Composite Design was applied. Both preservatives prevented fungal spoilage, but potassium sorbate was the most efficient to control the fungi growth. The combined use of these preservatives did not show a synergistic effect. The results showed that the use of these salts may not be sufficient to prevent fungal spoilage and the greatest fungal growth was recorded at 30°C. Copyright © 2017 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

The future of terrestrial mammals in the Mediterranean basin under climate change

PubMed Central

Maiorano, Luigi; Falcucci, Alessandra; Zimmermann, Niklaus E.; Psomas, Achilleas; Pottier, Julien; Baisero, Daniele; Rondinini, Carlo; Guisan, Antoine; Boitani, Luigi

2011-01-01

The Mediterranean basin is considered a hotspot of biological diversity with a long history of modification of natural ecosystems by human activities, and is one of the regions that will face extensive changes in climate. For 181 terrestrial mammals (68% of all Mediterranean mammals), we used an ensemble forecasting approach to model the future (approx. 2100) potential distribution under climate change considering five climate change model outputs for two climate scenarios. Overall, a substantial number of Mediterranean mammals will be severely threatened by future climate change, particularly endemic species. Moreover, we found important changes in potential species richness owing to climate change, with some areas (e.g. montane region in central Italy) gaining species, while most of the region will be losing species (mainly Spain and North Africa). Existing protected areas (PAs) will probably be strongly influenced by climate change, with most PAs in Africa, the Middle East and Spain losing a substantial number of species, and those PAs gaining species (e.g. central Italy and southern France) will experience a substantial shift in species composition. PMID:21844047

Sex Differences in Face Processing: Are Women Less Lateralized and Faster than Men?

ERIC Educational Resources Information Center

Godard, Ornella; Fiori, Nicole

2010-01-01

The aim of this study was to determine the influence of sex on hemispheric asymmetry and cooperation in a face recognition task. We used a masked priming paradigm in which the prime stimulus was centrally presented; it could be a bisymmetric face or a hemi-face in which facial information was presented in the left or the right visual field and…

Maintaining Teachers' Face in the Context of Change: Results from a Study of Vietnamese College Lecturers' Perceptions of Face

ERIC Educational Resources Information Center

Nguyen, Thi Quynh Trang

2017-01-01

Gaining and saving face are very important in Vietnam as a mechanism of social control, including the professional behaviour of teachers. Interviews with 15 lecturers (aged 24-37) at a teacher training college in a Central Coast province of Vietnam illustrated the relationship between their concepts of face and their beliefs about good teaching.…

VIEW OF THE WEST SIDE OF BUILDING 63, FACING EAST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF THE WEST SIDE OF BUILDING 63, FACING EAST. - Naval Computer & Telecommunications Area Station, Enlisted Men's Barracks, West corner of Central Street & Midway Drive, Wahiawa, Honolulu County, HI

OVERVIEW OF CENTRAL HEATING PLANT, WITH OIL STORAGE ON LEFT, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

OVERVIEW OF CENTRAL HEATING PLANT, WITH OIL STORAGE ON LEFT, BOILER BUILDING ON RIGHT, SOUTH AND EAST ELEVATIONS, CAMERA FACING NORTH. - New Haven Rail Yard, Central Steam Plant and Oil Storage, Vicinity of Union Avenue, New Haven, New Haven County, CT

Composite electrode for use in electrochemical cells

DOEpatents

Vanderborgh, N.E.; Huff, J.R.; Leddy, J.

1987-10-16

A porous composite electrode for use in electrochemical cells. The electrode has a first face and a second face defining a relatively thin section therebetween. The electrode is comprised of an ion conducting material, an electron conducting material, and an electrocatalyst. The volume concentration of the ion conducting material is greatest at the first face and is decreased across the section, while the volume concentration of the electron conducting material is greatest at the second face and decreases across the section of the electrode. Substantially all of the electrocatalyst is positioned within the electrode section in a relatively narrow zone where the rate of electron transport of the electrode is approximately equal to the rate of ion transport of the electrode. 4 figs., 1 tab.

Composite electrode for use in electrochemical cells

DOEpatents

Vanderborgh, Nicholas E.; Huff, James R.; Leddy, Johna

1989-01-01

A porous composite electrode for use in electrochemical cells. The electrode has a first face and a second face defining a relatively thin section therebetween. The electrode is comprised of an ion conducting material, an electron conducting material, and an electrocatalyst. The volume concentration of the ion conducting material is greatest at the first face and is decreased across the section, while the volume concentration of the electron conducting material is greatest at the second face and decreases across the section of the electrode. Substantially all of the electrocatalyst is positioned within the electrode section in a relatively narrow zone where the rate of electron transport of the electrode is approximately equal to the rate of ion transport of the electrode.

Human Body Odour Composites Are Not Perceived More Positively than the Individual Samples.

PubMed

Fialová, Jitka; Sorokowska, Agnieszka; Roberts, S Craig; Kubicová, Lydie; Havlíček, Jan

2018-01-01

It is well established that composite facial images are perceived as more attractive compared with individual images, suggesting a preference for heterozygosity. Similarly, there is evidence that preferences for body odours might be linked to heterozygosity. Here, we tested whether blending individual body odours into composites would follow a similar pattern as observed in the perception of faces. We collected axillary odour samples from 38 individuals, which were subsequently assessed individually and as composites of two ( N  = 19) or four ( N  = 9) body odours regarding their pleasantness, attractiveness and intensity. We found no significant differences between mean ratings of individual odour samples or composites of two or four odour samples. Our results indicate that, in contrast to faces, composite body odours are not rated as more attractive. Composite body odours retain similar hedonic perceptual qualities as individual odours, thus highlighting differences in visual and chemosensory perceptual mechanisms.

Human Body Odour Composites Are Not Perceived More Positively than the Individual Samples

PubMed Central

Fialová, Jitka; Sorokowska, Agnieszka; Roberts, S. Craig; Kubicová, Lydie; Havlíček, Jan

2018-01-01

It is well established that composite facial images are perceived as more attractive compared with individual images, suggesting a preference for heterozygosity. Similarly, there is evidence that preferences for body odours might be linked to heterozygosity. Here, we tested whether blending individual body odours into composites would follow a similar pattern as observed in the perception of faces. We collected axillary odour samples from 38 individuals, which were subsequently assessed individually and as composites of two (N = 19) or four (N = 9) body odours regarding their pleasantness, attractiveness and intensity. We found no significant differences between mean ratings of individual odour samples or composites of two or four odour samples. Our results indicate that, in contrast to faces, composite body odours are not rated as more attractive. Composite body odours retain similar hedonic perceptual qualities as individual odours, thus highlighting differences in visual and chemosensory perceptual mechanisms. PMID:29770184

Masking with faces in central visual field under a variety of temporal schedules.

PubMed

Daar, Marwan; Wilson, Hugh R

2015-11-01

With a few exceptions, previous studies have explored masking using either a backward mask or a common onset trailing mask, but not both. In a series of experiments, we demonstrate the use of faces in central visual field as a viable method to study the relationship between these two types of mask schedule. We tested observers in a two alternative forced choice face identification task, where both target and mask comprised synthetic faces, and show that a simple model can successfully predict masking across a variety of masking schedules ranging from a backward mask to a common onset trailing mask and a number of intermediate variations. Our data are well accounted for by a window of sensitivity to mask interference that is centered at around 100 ms. Copyright © 2015 Elsevier Ltd. All rights reserved.

Prism adaptation does not alter configural processing of faces

PubMed Central

Bultitude, Janet H.; Downing, Paul E.; Rafal, Robert D.

2013-01-01

Patients with hemispatial neglect (‘neglect’) following a brain lesion show difficulty responding or orienting to objects and events on the left side of space. Substantial evidence supports the use of a sensorimotor training technique called prism adaptation as a treatment for neglect. Reaching for visual targets viewed through prismatic lenses that induce a rightward shift in the visual image results in a leftward recalibration of reaching movements that is accompanied by a reduction of symptoms in patients with neglect. The understanding of prism adaptation has also been advanced through studies of healthy participants, in whom adaptation to leftward prismatic shifts results in temporary neglect-like performance. Interestingly, prism adaptation can also alter aspects of non-lateralised spatial attention. We previously demonstrated that prism adaptation alters the extent to which neglect patients and healthy participants process local features versus global configurations of visual stimuli. Since deficits in non-lateralised spatial attention are thought to contribute to the severity of neglect symptoms, it is possible that the effect of prism adaptation on these deficits contributes to its efficacy. This study examines the pervasiveness of the effects of prism adaptation on perception by examining the effect of prism adaptation on configural face processing using a composite face task. The composite face task is a persuasive demonstration of the automatic global-level processing of faces: the top and bottom halves of two familiar faces form a seemingly new, unknown face when viewed together. Participants identified the top or bottom halves of composite faces before and after prism adaptation. Sensorimotor adaptation was confirmed by significant pointing aftereffect, however there was no significant change in the extent to which the irrelevant face half interfered with processing. The results support the proposal that the therapeutic effects of prism adaptation are limited to dorsal stream processing. PMID:25110574

Prism adaptation does not alter configural processing of faces.

PubMed

Bultitude, Janet H; Downing, Paul E; Rafal, Robert D

2013-01-01

Patients with hemispatial neglect ('neglect') following a brain lesion show difficulty responding or orienting to objects and events on the left side of space. Substantial evidence supports the use of a sensorimotor training technique called prism adaptation as a treatment for neglect. Reaching for visual targets viewed through prismatic lenses that induce a rightward shift in the visual image results in a leftward recalibration of reaching movements that is accompanied by a reduction of symptoms in patients with neglect. The understanding of prism adaptation has also been advanced through studies of healthy participants, in whom adaptation to leftward prismatic shifts results in temporary neglect-like performance. Interestingly, prism adaptation can also alter aspects of non-lateralised spatial attention. We previously demonstrated that prism adaptation alters the extent to which neglect patients and healthy participants process local features versus global configurations of visual stimuli. Since deficits in non-lateralised spatial attention are thought to contribute to the severity of neglect symptoms, it is possible that the effect of prism adaptation on these deficits contributes to its efficacy. This study examines the pervasiveness of the effects of prism adaptation on perception by examining the effect of prism adaptation on configural face processing using a composite face task. The composite face task is a persuasive demonstration of the automatic global-level processing of faces: the top and bottom halves of two familiar faces form a seemingly new, unknown face when viewed together. Participants identified the top or bottom halves of composite faces before and after prism adaptation. Sensorimotor adaptation was confirmed by significant pointing aftereffect, however there was no significant change in the extent to which the irrelevant face half interfered with processing. The results support the proposal that the therapeutic effects of prism adaptation are limited to dorsal stream processing.

Planar optical waveguides for optical panel having gradient refractive index core

DOEpatents

Veligdan, James T.

2001-01-01

An optical panel is disclosed. A plurality of stacked planar optical waveguides are used to guide light from an inlet face to an outlet face of an optical panel. Each of the optical waveguides comprises a planar sheet of core material having a central plane. The core material has an index of refraction which decreases as the distance from the central plane increases. The decrease in the index of refraction occurs gradually and continuously.

Planar optical waveguides for optical panel having gradient refractive index core

DOEpatents

Veligdan, James T.

2004-08-24

An optical panel is disclosed. A plurality of stacked planar optical waveguides are used to guide light from an inlet face to an outlet face of an optical panel. Each of the optical waveguides comprises a planar sheet of core material having a central plane. The core material has an index of refraction which decreases as the distance from the central plane increases. The decrease in the index of refraction occurs gradually and continuously.

Holistic Facial Composite Creation and Subsequent Video Line-up Eyewitness Identification Paradigm.

PubMed

Davis, Josh P; Maigut, Andreea C; Jolliffe, Darrick; Gibson, Stuart J; Solomon, Chris J

2015-12-24

The paradigm detailed in this manuscript describes an applied experimental method based on real police investigations during which an eyewitness or victim to a crime may create from memory a holistic facial composite of the culprit with the assistance of a police operator. The aim is that the composite is recognized by someone who believes that they know the culprit. For this paradigm, participants view a culprit actor on video and following a delay, participant-witnesses construct a holistic system facial composite. Controls do not construct a composite. From a series of arrays of computer-generated, but realistic faces, the holistic system construction method primarily requires participant-witnesses to select the facial images most closely meeting their memory of the culprit. Variation between faces in successive arrays is reduced until ideally the final image possesses a close likeness to the culprit. Participant-witness directed tools can also alter facial features, configurations between features and holistic properties (e.g., age, distinctiveness, skin tone), all within a whole face context. The procedure is designed to closely match the holistic manner by which humans' process faces. On completion, based on their memory of the culprit, ratings of composite-culprit similarity are collected from the participant-witnesses. Similar ratings are collected from culprit-acquaintance assessors, as a marker of composite recognition likelihood. Following a further delay, all participants--including the controls--attempt to identify the culprit in either a culprit-present or culprit-absent video line-up, to replicate circumstances in which the police have located the correct culprit, or an innocent suspect. Data of control and participant-witness line-up outcomes are presented, demonstrating the positive influence of holistic composite construction on identification accuracy. Correlational analyses are conducted to measure the relationship between assessor and participant-witness composite-culprit similarity ratings, delay, identification accuracy, and confidence to examine which factors influence video line-up outcomes.

Holistic Facial Composite Creation and Subsequent Video Line-up Eyewitness Identification Paradigm

PubMed Central

Davis, Josh P.; Maigut, Andreea C.; Jolliffe, Darrick; Gibson, Stuart J.; Solomon, Chris J.

2015-01-01

The paradigm detailed in this manuscript describes an applied experimental method based on real police investigations during which an eyewitness or victim to a crime may create from memory a holistic facial composite of the culprit with the assistance of a police operator. The aim is that the composite is recognized by someone who believes that they know the culprit. For this paradigm, participants view a culprit actor on video and following a delay, participant-witnesses construct a holistic system facial composite. Controls do not construct a composite. From a series of arrays of computer-generated, but realistic faces, the holistic system construction method primarily requires participant-witnesses to select the facial images most closely meeting their memory of the culprit. Variation between faces in successive arrays is reduced until ideally the final image possesses a close likeness to the culprit. Participant-witness directed tools can also alter facial features, configurations between features and holistic properties (e.g., age, distinctiveness, skin tone), all within a whole face context. The procedure is designed to closely match the holistic manner by which humans’ process faces. On completion, based on their memory of the culprit, ratings of composite-culprit similarity are collected from the participant-witnesses. Similar ratings are collected from culprit-acquaintance assessors, as a marker of composite recognition likelihood. Following a further delay, all participants — including the controls — attempt to identify the culprit in either a culprit-present or culprit-absent video line-up, to replicate circumstances in which the police have located the correct culprit, or an innocent suspect. Data of control and participant-witness line-up outcomes are presented, demonstrating the positive influence of holistic composite construction on identification accuracy. Correlational analyses are conducted to measure the relationship between assessor and participant-witness composite-culprit similarity ratings, delay, identification accuracy, and confidence to examine which factors influence video line-up outcomes. PMID:26779673

EN FACE IMAGING OF PACHYCHOROID SPECTRUM DISORDERS WITH SWEPT-SOURCE OPTICAL COHERENCE TOMOGRAPHY.

PubMed

Dansingani, Kunal K; Balaratnasingam, Chandrakumar; Naysan, Jonathan; Freund, K Bailey

2016-03-01

To correlate clinical manifestations with choroidal morphology in pachychoroid disorders, including central serous chorioretinopathy, pachychoroid pigment epitheliopathy, pachychoroid neovasculopathy, and polypoidal choroidal vasculopathy, using en face swept-source optical coherence tomography (OCT). Patients with pachychoroid spectrum diagnoses were identified nonconsecutively through a review of charts and multimodal imaging. Each eye was categorized as uncomplicated pachychoroid, pachychoroid pigment epitheliopathy, central serous chorioretinopathy, pachychoroid neovasculopathy, or polypoidal choroidal vasculopathy. All patients included in this series then underwent bilateral swept-source OCT. Sixty-six eyes of 33 patients were included. Numbers assigned to diagnostic categories were 8 uncomplicated pachychoroid, 13 pachychoroid pigment epitheliopathy, 27 central serous chorioretinopathy, 15 pachychoroid neovasculopathy, and 3 polypoidal choroidal vasculopathy. One eye was classified as normal. Swept-source OCT choroidal thickness maps confirmed increased thickness under the areas of pachychoroid pigment epitheliopathy, central serous chorioretinopathy, type 1 NV (pachychoroid neovasculopathy), or polyps (polypoidal choroidal vasculopathy). En face swept-source OCT showed dilated outer choroidal vessels in all eyes. In several eyes with a chronic disease, focal choriocapillaris atrophy with inward displacement of deep choroidal vessels was noted. Although clinical manifestations of pachychoroid spectrum disorders vary considerably, these entities share morphologic findings in the choroid, including increased thickness and dilated outer choroidal vessels. En face swept-source OCT localizes these changes to disease foci and shows additional findings that may unify our understanding of disease pathogenesis.

Feedback 2.0 in Online Writing Instruction: Combining Audio-Visual and Text-Based Commentary to Enhance Student Revision and Writing Competency

ERIC Educational Resources Information Center

Grigoryan, Anna

2017-01-01

The continued increase in the number of students participating in online degree programs has led to an increase in the number of students taking online composition courses. Currently, most online writing programs replicate approaches used in face-to-face composition courses and simply transfer them to the online learning environment. However,…

Damage Tolerance of Sandwich Plates with Debonded Face Sheets

NASA Technical Reports Server (NTRS)

Avery, John L., III; Sankar, Bhavani V.

1998-01-01

Axial compression tests were performed on debonded sandwich composites made of graphite/epoxy face-sheets and aramid fiber honeycomb core. The sandwich beams were manufactured using a vacuum baccrin2 process. The face-sheet and the sandwich beam were co-cured. Delamination between one of the face sheets and the core was introduced by using a Teflon layer during the curing process. Axial compression tests were performed to determine the ultimate load carrying capacity of the debonded beams. Flatwise tension tests and Double Cantilever Beam tests were performed to determine. respectively, the strength and fracture toughness of the face-sheet/core interface. From the test results semi-empirical formulas were derived for the fracture toughness and ultimate compressive load carrying capacity in terms of the core density. core thickness. face-sheet thickness and debond length. Four different failure modes and their relation to the structural properties were identified. Linear buckling analysis was found to be inadequate in predicting the compressive load carrying capacity of the debonded sandwich composites.

CEC-atmospheric pressure ionization MS of pesticides using a surfactant-bound monolithic column.

PubMed

Gu, Congying; Shamsi, Shahab A

2010-04-01

A surfactant bound poly (11-acrylaminoundecanoic acid-ethylene dimethacrylate) monolithic column was simply prepared by in situ co-polymerization of 11-acrylaminoundecanoic acid and ethylene dimethacrylate with 1-propanol, 1,4-butanediol and water as porogens in 100 microm id fused-silica capillary in one step. This column was used in CEC-atmospheric pressure photoionization (APPI)-MS system for separation and detection of N-methylcarbamates pesticides. Numerous parameters are optimized for CEC-APPI-MS. After evaluation of the mobile phase composition, sheath liquid composition and the monolithic capillary outlet position, a fractional factorial design was selected as a screening procedure to identify factors of ionization source parameters, such as sheath liquid flow rate, drying gas flow rate, drying gas temperature, nebulizing gas pressure, vaporizer temperature and capillary voltage, which significantly influence APPI-MS sensitivity. A face-centered central composite design was further utilized to optimize the most significant parameters and predict the best sensitivity. Under optimized conditions, S/Ns around 78 were achieved for an injection of 100 ng/mL of each pesticide. Finally, this CEC-APPI-MS method was successfully applied to the analysis of nine N-methylcarbamates in spiked apple juice sample after solid phase extraction with recoveries in the range of 65-109%.

Holistic Processing in the Composite Task Depends on Face Size.

PubMed

Ross, David A; Gauthier, Isabel

Holistic processing is a hallmark of face processing. There is evidence that holistic processing is strongest for faces at identification distance, 2 - 10 meters from the observer. However, this evidence is based on tasks that have been little used in the literature and that are indirect measures of holistic processing. We use the composite task- a well validated and frequently used paradigm - to measure the effect of viewing distance on holistic processing. In line with previous work, we find a congruency x alignment effect that is strongest for faces that are close (2m equivalent distance) than for faces that are further away (24m equivalent distance). In contrast, the alignment effect for same trials, used by several authors to measure holistic processing, produced results that are difficult to interpret. We conclude that our results converge with previous findings providing more direct evidence for an effect of size on holistic processing.

Holistic Processing in the Composite Task Depends on Face Size

PubMed Central

Ross, David A.; Gauthier, Isabel

2015-01-01

Holistic processing is a hallmark of face processing. There is evidence that holistic processing is strongest for faces at identification distance, 2 – 10 meters from the observer. However, this evidence is based on tasks that have been little used in the literature and that are indirect measures of holistic processing. We use the composite task– a well validated and frequently used paradigm – to measure the effect of viewing distance on holistic processing. In line with previous work, we find a congruency x alignment effect that is strongest for faces that are close (2m equivalent distance) than for faces that are further away (24m equivalent distance). In contrast, the alignment effect for same trials, used by several authors to measure holistic processing, produced results that are difficult to interpret. We conclude that our results converge with previous findings providing more direct evidence for an effect of size on holistic processing. PMID:26500423

FACILITY 713, HALLWAY LOOKING TOWARDS MASTER BEDROOM END, VIEW FACING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 713, HALLWAY LOOKING TOWARDS MASTER BEDROOM END, VIEW FACING NORTH. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI

District Central Offices as Learning Organizations: How Sociocultural and Organizational Learning Theories Elaborate District Central Office Administrators' Participation in Teaching and Learning Improvement Efforts

ERIC Educational Resources Information Center

Honig, Meredith I.

2008-01-01

School district central office administrators face unprecedented demands to become key supporters of efforts to improve teaching and learning districtwide. Some suggest that these demands mean that central offices, especially in midsized and large districts, should become learning organizations but provide few guides for how central offices might…

Postsecondary Transitions for Youth in Appalachia's Central Subregions: A Review of Education Research, 1995-2015

ERIC Educational Resources Information Center

Kannapel, Patricia J.; Flory, Michael A.

2017-01-01

This article reviews research on issues surrounding postsecondary transitions for youth in middle (North Central, Central, and South Central) Appalachia, a region that faces numerous education challenges because of its geography, poverty, and economy. Examining published research and data from 1995 to 2015, the review seeks to inform education…

Temperature Effects on the Impact Behavior of Fiberglass and Fiberglass/Kevlar Sandwich Composites

NASA Astrophysics Data System (ADS)

Halvorsen, Aaron; Salehi-Khojn, Amin; Mahinfalah, Mohammad; Nakhaei-Jazar, Reza

2006-11-01

Impact tests were performed on sandwich composites with Fiberglass and Fiberglass/Kevlar face sheets subjected to varied temperatures. A number of specimens were tested at -50 to 120 °C temperature range and at 20, 30, and 45 J low velocity energy levels. Impact properties of the sandwich composites that were evaluated include maximum normal and shear stresses, maximum energy absorption, non-dimensional parameters (AEMP, PI, and RD), and compression after impact strength. Composite specimens tested have a urethane foam filled honeycomb center sandwiched between a variation of four layered Fiberglass and Kevlar/Fiberglass face sheets in a thermoset polymer epoxy matrix. Results showed that the impact performance of these sandwich composites changed over the range of temperature considered and with the addition of a Kevlar layer.

Liquid molded hollow cell core composite articles

NASA Technical Reports Server (NTRS)

Bernetich, Karl R. (Inventor)

2005-01-01

A hollow core composite assembly 10 is provided, including a hollow core base 12 having at least one open core surface 14, a bondable solid film 22 applied to the open core surface 14, at least one dry face ply 30 laid up dry and placed on top of the solid film 22, and a liquid resin 32 applied to the at least one dry face ply 30 and then cured.

Limiter

DOEpatents

Cohen, Samuel A.; Hosea, Joel C.; Timberlake, John R.

1986-01-01

A limiter with a specially contoured front face accommodates the various power scrape-off distances .lambda..sub.p, which depend on the parallel velocity, V.sub..parallel., of the impacting particles. The front face of the limiter (the plasma-side face) is flat with a central indentation. In addition, the limiter shape is cylindrically symmetric so that the limiter can be rotated for greater heat distribution.

9. Front door, central hall interior view, cross and open ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Front door, central hall interior view, cross and open bible configuration, with transom and sidelights, facing south. - Landers-Cain House, 915 Pleasant Hill Road, Lawrenceville, Gwinnett County, GA

Recovering Faces from Memory: The Distracting Influence of External Facial Features

ERIC Educational Resources Information Center

Frowd, Charlie D.; Skelton, Faye; Atherton, Chris; Pitchford, Melanie; Hepton, Gemma; Holden, Laura; McIntyre, Alex H.; Hancock, Peter J. B.

2012-01-01

Recognition memory for unfamiliar faces is facilitated when contextual cues (e.g., head pose, background environment, hair and clothing) are consistent between study and test. By contrast, inconsistencies in external features, especially hair, promote errors in unfamiliar face-matching tasks. For the construction of facial composites, as carried…

An evaluation of the influence of modifications of selected face elements on the reliability of composite drawings.

PubMed

Lewandowski, Z

2004-01-01

The modification of various face elements in a composite drawing influences its reliability in relation to the corresponding photograph. Changes in various face elements are the cause of this decrease in similarity, when examined by both sexes. The results of an initial test suggest: regardless of the observing subject's sex, the highest rated picture (regarded as the most similar one) was the original picture. The face with a shortened nose height (n-sn) was recognised as the least similar to the original. In the second test, this picture obtained the lowest number of points, irrespective of the examining subjects' sex. In the examining group of females, the picture with changed bigonial breadth (go-go) was rated low. In the group of males the picture with a shortened interocular breadth (en-en) appeared poorly reliable. In the case of females, the likeness of the composite drawing to the photograph is least affected by shortening of mouth breadth (ch-ch), whereas in males, by the decrease in nose breadth (al-al).

Influence of reinforcement type on the mechanical behavior and fire response of hybrid composites and sandwich structures

NASA Astrophysics Data System (ADS)

Giancaspro, James William

Lightweight composites and structural sandwich panels are commonly used in marine and aerospace applications. Using carbon, glass, and a host of other high strength fiber types, a broad range of laminate composites and sandwich panels can be developed. Hybrid composites can be constructed by laminating multiple layers of varying fiber types while sandwich panels are manufactured by laminating rigid fiber facings onto a lightweight core. However, the lack of fire resistance of the polymers used for the fabrication remains a very important problem. The research presented in this dissertation deals with an inorganic matrix (Geopolymer) that can be used to manufacture laminate composites and sandwich panels that are resistant up to 1000°C. This dissertation deals with the influence of fiber type on the mechanical behavior and the fire response of hybrid composites and sandwich structures manufactured using this resin. The results are categorized into the following distinct studies. (i) High strength carbon fibers were combined with low cost E-glass fibers to obtain hybrid laminate composites that are both economical and strong. The E-glass fabrics were used as a core while the carbon fibers were placed on the tension face and on both tension and compression faces. (ii) Structural sandwich beams were developed by laminating various types of reinforcement onto the tension and compression faces of balsa wood cores. The flexural behavior of the beams was then analyzed and compared to beams reinforced with organic composite. The effect of core density was evaluated using oak beams reinforced with inorganic composite. (iii) To measure the fire response, balsa wood sandwich panels were manufactured using a thin layer of a fire-resistant paste to serve for fire protection. Seventeen sandwich panels were fabricated and tested to measure the heat release rates and smoke-generating characteristics. The results indicate that Geopolymer can be effectively used to fabricate both high strength composite plates and sandwich panels. A 2 mm thick coating of fireproofing on balsa wood is sufficient to satisfy FAA fire requirements.

View of original brick wall on the western face of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of original brick wall on the western face of the boiler house (center right) and electrical department (far right). - Johnson Steel Street Rail Company, Electrical Department & Boiler House, 525 Central Avenue, Johnstown, Cambria County, PA

Scene and human face recognition in the central vision of patients with glaucoma

PubMed Central

Aptel, Florent; Attye, Arnaud; Guyader, Nathalie; Boucart, Muriel; Chiquet, Christophe; Peyrin, Carole

2018-01-01

Primary open-angle glaucoma (POAG) firstly mainly affects peripheral vision. Current behavioral studies support the idea that visual defects of patients with POAG extend into parts of the central visual field classified as normal by static automated perimetry analysis. This is particularly true for visual tasks involving processes of a higher level than mere detection. The purpose of this study was to assess visual abilities of POAG patients in central vision. Patients were assigned to two groups following a visual field examination (Humphrey 24–2 SITA-Standard test). Patients with both peripheral and central defects and patients with peripheral but no central defect, as well as age-matched controls, participated in the experiment. All participants had to perform two visual tasks where low-contrast stimuli were presented in the central 6° of the visual field. A categorization task of scene images and human face images assessed high-level visual recognition abilities. In contrast, a detection task using the same stimuli assessed low-level visual function. The difference in performance between detection and categorization revealed the cost of high-level visual processing. Compared to controls, patients with a central visual defect showed a deficit in both detection and categorization of all low-contrast images. This is consistent with the abnormal retinal sensitivity as assessed by perimetry. However, the deficit was greater for categorization than detection. Patients without a central defect showed similar performances to the controls concerning the detection and categorization of faces. However, while the detection of scene images was well-maintained, these patients showed a deficit in their categorization. This suggests that the simple loss of peripheral vision could be detrimental to scene recognition, even when the information is displayed in central vision. This study revealed subtle defects in the central visual field of POAG patients that cannot be predicted by static automated perimetry assessment using Humphrey 24–2 SITA-Standard test. PMID:29481572

Context Influences Holistic Processing of Non-face Objects in the Composite Task

PubMed Central

Richler, Jennifer J.; Bukach, Cindy M.; Gauthier, Isabel

2013-01-01

We explore whether holistic-like effects can be observed for non-face objects in novices as a result of the task context. We measure contextually-induced congruency effects for novel objects (Greebles) in a sequential matching selective attention task (composite task). When format at study was blocked, congruency effects were observed for study-misaligned, but not study-aligned, conditions (Experiment 1). However, congruency effects were observed in all conditions when study formats were randomized (Experiment 2), revealing that the presence of certain trial types (study-misaligned) in an experiment can induce congruency effects. In a dual task, a congruency effect for Greebles was induced in trials where a face was first encoded, only if it was aligned (Experiment 3). Thus, congruency effects can be induced by context that operates at the scale of the entire experiment or within a single trial. Implications for using the composite task to measure holistic processing are discussed. PMID:19304644

Tungsten-microdiamond composites for plasma facing components

NASA Astrophysics Data System (ADS)

Livramento, V.; Nunes, D.; Correia, J. B.; Carvalho, P. A.; Mardolcar, U.; Mateus, R.; Hanada, K.; Shohoji, N.; Fernandes, H.; Silva, C.; Alves, E.

2011-09-01

Tungsten is considered as one of promising candidate materials for plasma facing component in nuclear fusion reactors due to its resistance to sputtering and high melting point. High thermal conductivity is also a prerequisite for plasma facing components under the unique service environment of fusion reactor characterised by the massive heat load, especially in the divertor area. The feasibility of mechanical alloying of nanodiamond and tungsten, and the consolidation of the composite powders with Spark Plasma Sintering (SPS) was previously demonstrated. In the present research we report on the use of microdiamond instead of nanodiamond in such composites. Microdiamond is more favourable than nanodiamond in view of phonon transport performance leading to better thermal conductivity. However, there is a trade off between densification and thermal conductivity as the SPS temperature increases tungsten carbide formation from microdiamond is accelerated inevitably while the consolidation density would rise.

Preparation of tungsten fiber reinforced-tungsten/copper composite for plasma facing component

NASA Astrophysics Data System (ADS)

He, Gang; Xu, Kunyuan; Guo, Shibin; Qian, Xueqiang; Yang, Zengchao; Liu, Guanghua; Li, Jiangtao

2014-12-01

W fiber reinforced-W/Cu composite is designed as a transition layer between CuCrZr heat sink material and W plasma facing material. A novel method was developed for the preparation of W fiber reinforced-W/Cu composite by combining combustion synthesis with centrifugal infiltration. Cu melt with a transient temperature over 2000 °C produced by the thermite reaction was infiltrated into the W powder and fiber bed with the assistance of a high gravity field. It was found that the W particles were sintered and bonded to the W fibers due to the high temperature produced by the thermite reaction. The bending strength of W/Cu composite improved 12.7% through W fibers reinforcement.

Limiter

DOEpatents

Cohen, S.A.; Hosea, J.C.; Timberlake, J.R.

1984-10-19

A limiter with a specially contoured front face is provided. The front face of the limiter (the plasma-side face) is flat with a central indentation. In addition, the limiter shape is cylindrically symmetric so that the limiter can be rotated for greater heat distribution. This limiter shape accommodates the various power scrape-off distances lambda p, which depend on the parallel velocity, V/sub parallel/, of the impacting particles.

Mobilizing homeless youth for HIV prevention: a social network analysis of the acceptability of a face-to-face and online social networking intervention.

PubMed

Rice, Eric; Tulbert, Eve; Cederbaum, Julie; Barman Adhikari, Anamika; Milburn, Norweeta G

2012-04-01

The objective of the study is to use social network analysis to examine the acceptability of a youth-led, hybrid face-to-face and online social networking HIV prevention program for homeless youth.Seven peer leaders (PLs) engaged face-to-face homeless youth (F2F) in the creation of digital media projects (e.g. You Tube videos). PL and F2F recruited online youth (OY) to participate in MySpace and Facebook communities where digital media was disseminated and discussed. The resulting social networks were assessed with respect to size, growth, density, relative centrality of positions and homophily of ties. Seven PL, 53 F2F and 103 OY created two large networks. After the first 50 F2F youth participated, online networks entered a rapid growth phase. OY were among the most central youth in these networks. Younger aged persons and females were disproportionately connected to like youth. The program appears highly acceptable to homeless youth. Social network analysis revealed which PL were the most critical to the program and which types of participants (younger youth and females) may require additional outreach efforts in the future.

Mobilizing homeless youth for HIV prevention: a social network analysis of the acceptability of a face-to-face and online social networking intervention

PubMed Central

Rice, Eric; Tulbert, Eve; Cederbaum, Julie; Barman Adhikari, Anamika; Milburn, Norweeta G.

2012-01-01

The objective of the study is to use social network analysis to examine the acceptability of a youth-led, hybrid face-to-face and online social networking HIV prevention program for homeless youth.Seven peer leaders (PLs) engaged face-to-face homeless youth (F2F) in the creation of digital media projects (e.g. You Tube videos). PL and F2F recruited online youth (OY) to participate in MySpace and Facebook communities where digital media was disseminated and discussed. The resulting social networks were assessed with respect to size, growth, density, relative centrality of positions and homophily of ties. Seven PL, 53 F2F and 103 OY created two large networks. After the first 50 F2F youth participated, online networks entered a rapid growth phase. OY were among the most central youth in these networks. Younger aged persons and females were disproportionately connected to like youth. The program appears highly acceptable to homeless youth. Social network analysis revealed which PL were the most critical to the program and which types of participants (younger youth and females) may require additional outreach efforts in the future. PMID:22247453

Ultrasound assisted extraction of pectin from waste Artocarpus heterophyllus fruit peel.

PubMed

Moorthy, I Ganesh; Maran, J Prakash; Ilakya, S; Anitha, S L; Sabarima, S Pooja; Priya, B

2017-01-01

Four factors three level face centered central composite response surface design was employed in this study to investigate and optimize the effect of process variables (liquid-solid (LS) ratio (10:1-20:1ml/g), pH (1-2), sonication time (15-30min) and extraction temperature (50-70°C)) on the maximum extraction yield of pectin from waste Artocarpus heterophyllus (Jackfruit) peel by ultrasound assisted extraction method. Numerical optimization method was adapted in this study and the following optimal condition was obtained as follows: Liquid-solid ratio of 15:1ml/g, pH of 1.6, sonication time of 24min and temperature of 60°C. The optimal condition was validated through experiments and the observed value was interrelated with predicted value. Copyright © 2016 Elsevier B.V. All rights reserved.

Determination of capsaicinoids in topical cream by liquid-liquid extraction and liquid chromatography.

PubMed

Kaale, Eliangiringa; Van Schepdael, Ann; Roets, Eugène; Hoogmartens, Jos

2002-11-07

A reversed-phase liquid chromatography (LC) method has been developed, optimised and validated for the separation and quantitation of capsaicin (CP) and dihydrocapsaicin (DHCP) in a topical cream formulation. Sample preparation involves liquid-liquid extraction prior to LC analysis. The method uses a Hypersil C(18) BDS, 5 micrometer, 250x4.6 mm I.D. column maintained at 35 degrees C. The mobile phase comprises methanol, water, acetonitrile (ACN) and acetic acid (47:42:10:1, v/v/v/v) at a flow rate of 1.0 ml/min. Robustness was evaluated by performing a central composite face-centred design (CCF) experiment. The method shows good selectivity, linearity, sensitivity and repeatability. The conditions allow the separation and quantitation of CP and DHCP without interference from the other substances contained in the cream.

A statistical experiment design approach for optimizing biodegradation of weathered crude oil in coastal sediments.

PubMed

Mohajeri, Leila; Aziz, Hamidi Abdul; Isa, Mohamed Hasnain; Zahed, Mohammad Ali

2010-02-01

This work studied the bioremediation of weathered crude oil (WCO) in coastal sediment samples using central composite face centered design (CCFD) under response surface methodology (RSM). Initial oil concentration, biomass, nitrogen and phosphorus concentrations were used as independent variables (factors) and oil removal as dependent variable (response) in a 60 days trial. A statistically significant model for WCO removal was obtained. The coefficient of determination (R(2)=0.9732) and probability value (P<0.0001) demonstrated significance for the regression model. Numerical optimization based on desirability function were carried out for initial oil concentration of 2, 16 and 30 g per kg sediment and 83.13, 78.06 and 69.92 per cent removal were observed respectively, compare to 77.13, 74.17 and 69.87 per cent removal for un-optimized results.

INTERIOR FROM WESTERN SECTION, THROUGH CENTRAL SECTION, TO EASTERN SECTION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR FROM WESTERN SECTION, THROUGH CENTRAL SECTION, TO EASTERN SECTION, VIEW FACING NORTHEAST. - Naval Air Station Barbers Point, Aircraft Storehouse, Between Midway & Card Streets at Enterprise Avenue intersection, Ewa, Honolulu County, HI

Phase composition and microstructure of WC-Co alloys obtained by selective laser melting

NASA Astrophysics Data System (ADS)

Khmyrov, Roman S.; Shevchukov, Alexandr P.; Gusarov, Andrey V.; Tarasova, Tatyana V.

2018-03-01

Phase composition and microstructure of initial WC, BK8 (powder alloy 92 wt.% WC-8 wt.% Co), Co powders, ball-milled powders with four different compositions (1) 25 wt.% WC-75 wt.% Co, (2) 30 wt.% BK8-70 wt.% Co, (3) 50 wt.% WC-50 wt.% Co, (4) 94 wt.% WC-6 wt.% Co, and bulk alloys obtained by selective laser melting (SLM) from as-milled powders in as-melted state and after heat treatment were investigated by scanning electron microscopy and X-ray diffraction analysis. Initial and ball-milled powders consist of WC, hexagonal α-Co and face-centered cubic β-Co. The SLM leads to the formation of major new phases W3Co3C, W4Co2C and face-centered cubic β-Co-based solid solution. During the heat treatment, there occurs partial decomposition of the face-centered cubic β-Co-based solid solution with the formation of W2C and hexagonal α-Co solid solution. The microstructure of obtained bulk samples, in general, corresponds to the observed phase composition.

Perceptual and Gaze Biases during Face Processing: Related or Not?

PubMed Central

Samson, Hélène; Fiori-Duharcourt, Nicole; Doré-Mazars, Karine; Lemoine, Christelle; Vergilino-Perez, Dorine

2014-01-01

Previous studies have demonstrated a left perceptual bias while looking at faces, due to the fact that observers mainly use information from the left side of a face (from the observer's point of view) to perform a judgment task. Such a bias is consistent with the right hemisphere dominance for face processing and has sometimes been linked to a left gaze bias, i.e. more and/or longer fixations on the left side of the face. Here, we recorded eye-movements, in two different experiments during a gender judgment task, using normal and chimeric faces which were presented above, below, right or left to the central fixation point or on it (central position). Participants performed the judgment task by remaining fixated on the fixation point or after executing several saccades (up to three). A left perceptual bias was not systematically found as it depended on the number of allowed saccades and face position. Moreover, the gaze bias clearly depended on the face position as the initial fixation was guided by face position and landed on the closest half-face, toward the center of gravity of the face. The analysis of the subsequent fixations revealed that observers move their eyes from one side to the other. More importantly, no apparent link between gaze and perceptual biases was found here. This implies that we do not look necessarily toward the side of the face that we use to make a gender judgment task. Despite the fact that these results may be limited by the absence of perceptual and gaze biases in some conditions, we emphasized the inter-individual differences observed in terms of perceptual bias, hinting at the importance of performing individual analysis and drawing attention to the influence of the method used to study this bias. PMID:24454927

8. The entire south face of the Broad Street bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. The entire south face of the Broad Street bridge as seen from the flood levy in front of Central High School. - Broad Street Bridge, Spanning Scioto River at U.S. Route 40 (Broad Street), Columbus, Franklin County, OH

Psychocentricity and participant profiles: implications for lexical processing among multilinguals

PubMed Central

Libben, Gary; Curtiss, Kaitlin; Weber, Silke

2014-01-01

Lexical processing among bilinguals is often affected by complex patterns of individual experience. In this paper we discuss the psychocentric perspective on language representation and processing, which highlights the centrality of individual experience in psycholinguistic experimentation. We discuss applications to the investigation of lexical processing among multilinguals and explore the advantages of using high-density experiments with multilinguals. High density experiments are designed to co-index measures of lexical perception and production, as well as participant profiles. We discuss the challenges associated with the characterization of participant profiles and present a new data visualization technique, that we term Facial Profiles. This technique is based on Chernoff faces developed over 40 years ago. The Facial Profile technique seeks to overcome some of the challenges associated with the use of Chernoff faces, while maintaining the core insight that recoding multivariate data as facial features can engage the human face recognition system and thus enhance our ability to detect and interpret patterns within multivariate datasets. We demonstrate that Facial Profiles can code participant characteristics in lexical processing studies by recoding variables such as reading ability, speaking ability, and listening ability into iconically-related relative sizes of eye, mouth, and ear, respectively. The balance of ability in bilinguals can be captured by creating composite facial profiles or Janus Facial Profiles. We demonstrate the use of Facial Profiles and Janus Facial Profiles in the characterization of participant effects in the study of lexical perception and production. PMID:25071614

Ranking fluctuating asymmetry in a dot figure and the significant impact of imagining a face.

PubMed

Neby, Magne; Ivar, Folstad

2013-01-01

Fluctuating asymmetry and averageness is correlated with our perception of beauty in human faces. Yet, whether deviations of centrality in the positioning of the eyes, the nose, and the mouth have different effects on our perception of asymmetry in a holistic human face, is still uncertain. In this study we aimed to test the relative effect of decentralising the horizontal position of three sets of paired dots representing eyes, nostrils, or mouth from the vertical midline of ambiguous dot figures, vaguely resembling a face. The figures were ranked according to perceived asymmetry by human observers. When associating the figures with non-facial objects (eg a butterfly), none of the figures' rank distribution differed from each other. However, when observers imagined the figures to represent a human face, the figure with the decentralised pair of dots representing the nostrils was significantly ranked as more asymmetric than the other figures. This result provides indications that the brain may deal with information about facial asymmetry and averageness heavily depending on the centrality of the nasal region.

How "Central" Is Central Coherence?: Preliminary Evidence on the Link between Conceptual and Perceptual Processing in Children with Autism

ERIC Educational Resources Information Center

Lopez, Beatriz; Leekam, Susan R.; Arts, Gerda R. J.

2008-01-01

This study aimed to test the assumption drawn from weak central coherence theory that a central cognitive mechanism is responsible for integrating information at both conceptual and perceptual levels. A visual semantic memory task and a face recognition task measuring use of holistic information were administered to 15 children with autism and 16…

NDE of Fiber Reinforced Foam Composite Structures for Future Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Walker, james; Roth, Don; Hopkins, Dale

2010-01-01

This slide presentation reviews the complexities of non-destructive evaluation (NDE) of fiber reinforced foam composite structures to be used for aerospace vehicles in the future.Various views of fiber reinforced foam materials are shown and described. Conventional methods of NDE for composites are reviewed such as Micro-computed X-Ray Tomography, Thermography, Shearography, and Phased Array Ultrasonics (PAUT). These meth0ods appear to work well on the face sheet and face sheet ot core bond, they do not provide adequate coverage for the webs. There is a need for additional methods that will examine the webs and web to foam core bond.

The Effect of Strike Face Geometry on the Dynamic Delamination of Composite Back Plates

DTIC Science & Technology

2015-01-01

behind the ceramic (Zuogang et al. 2010). In many cases, Kevlar , S-2 glass, ultra-high-molecular-weight polyethylene, or a similar high- performance...composite laminate is used as the strike face backing or “backer”. The latter will be the focus in this report. Woven fabrics have interlacing fibers...over other weaves. Woven fabrics also have better fracture toughness than unidirectional and cross- ply laminates (Kim and Sham 2000). However, a

Understory composition of hardwood stands in north central West Virginia

Treesearch

M.J. Twery

1991-01-01

Understory composition was measured on 960 10.5 m2 plots in 16 stands on the West Virginia University Forest in north-central West Virginia. The overstory composition was dominated by oaks (Quercus spp.) on 50% of the stands and by a mixture of oaks and yellow-poplar (Liriodendron tulipifera L.) on 50%. All...

FACILITY 847, DETAIL OF A CENTRAL STAIRWAY FROM COURTYARD, QUADRANGLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 847, DETAIL OF A CENTRAL STAIRWAY FROM COURTYARD, QUADRANGLE J, VIEW FACING NORTHEAST. - Schofield Barracks Military Reservation, Quadrangles I & J Barracks Type, Between Wright-Smith & Capron Avenues near Williston Avenue, Wahiawa, Honolulu County, HI

Own- and other-race face identity recognition in children: the effects of pose and feature composition.

PubMed

Anzures, Gizelle; Kelly, David J; Pascalis, Olivier; Quinn, Paul C; Slater, Alan M; de Viviés, Xavier; Lee, Kang

2014-02-01

We used a matching-to-sample task and manipulated facial pose and feature composition to examine the other-race effect (ORE) in face identity recognition between 5 and 10 years of age. Overall, the present findings provide a genuine measure of own- and other-race face identity recognition in children that is independent of photographic and image processing. The current study also confirms the presence of an ORE in children as young as 5 years of age using a recognition paradigm that is sensitive to their developing cognitive abilities. In addition, the present findings show that with age, increasing experience with familiar classes of own-race faces and further lack of experience with unfamiliar classes of other-race faces serves to maintain the ORE between 5 and 10 years of age rather than exacerbate the effect. All age groups also showed a differential effect of stimulus facial pose in their recognition of the internal regions of own- and other-race faces. Own-race inner faces were remembered best when three-quarter poses were used during familiarization and frontal poses were used during the recognition test. In contrast, other-race inner faces were remembered best when frontal poses were used during familiarization and three-quarter poses were used during the recognition test. Thus, children encode and/or retrieve own- and other-race faces from memory in qualitatively different ways.

Own- and other-race face identity recognition in children: The effects of pose and feature composition

PubMed Central

Anzures, Gizelle; Kelly, David J.; Pascalis, Olivier; Quinn, Paul C.; Slater, Alan M.; de Viviés, Xavier; Lee, Kang

2013-01-01

We used a matching-to-sample task and manipulated facial pose and feature composition to examine the other-race effect (ORE) in face identity recognition between 5 and 10 years of age. Overall, the present findings provide a genuine measure of own- and other-race face identity recognition in children that is independent of photographic and image processing. The present study also confirms the presence of an ORE in children as young as 5 years of age using a recognition paradigm that is sensitive to their developing cognitive abilities. In addition, the present findings show that with age, increasing experience with familiar classes of own-race faces and further lack of experience with unfamiliar classes of other-race faces serves to maintain the ORE between 5 to 10 years of age rather than exacerbate the effect. All age groups also showed a differential effect of stimulus facial pose in their recognition of the internal regions of own- and other-race faces. Own-race inner faces were remembered best when three-quarter poses were used during familiarization and frontal poses were used during the recognition test. In contrast, other-race inner faces were remembered best when frontal poses were used during familiarization and three-quarter poses were used during the recognition test. Thus, children encode and/or retrieve own- and other-race faces from memory in qualitatively different ways. PMID:23731287

Issues and concepts for making durable composites

Treesearch

Frederick A. Kamke; Jerrold E. Winandy

2008-01-01

Perhaps the greatest obstacle facing the acceptance of engineered wood composite products into new markets is the perceived lack of durability. Public perception is that particleboard and other wood-based composites fall apart when exposed to water. This paper will review the unique characteristics of wood based composites that make them more or less susceptible to...

Surface decontamination compositions and methods

DOEpatents

Wright,; Karen, E [Idaho Falls, ID; Cooper, David C [Idaho Falls, ID; Peterman, Dean R [Idaho Falls, ID; Demmer, Ricky L [Idaho Falls, ID; Tripp, Julia L [Pocatello, ID; Hull, Laurence C [Idaho Falls, ID

2011-03-29

Clay-based compositions capable of absorbing contaminants from surfaces or objects having surface faces may be applied to a surface and later removed, the removed clay-based compositions absorbing at least a portion of the contaminant from the surface or object to which it was applied.

Protective Face Mask

NASA Technical Reports Server (NTRS)

1981-01-01

Mask to protect the physically impaired from injuries to the face and head has been developed by Langley Research Center. It is made of composite materials, usually graphite or boron fibers woven into a matrix. Weighs less than three ounces.

Qualitative evaluation of the mineralogical and chemical composition of dry deposition in the central and southern highlands of Jordan.

PubMed

Jiries, Anwar; El-Hasan, Tayel; Manasrah, Walid

2002-09-01

The chemical and mineralogical composition of dry deposition in the western highlands of central and south Jordan at the end of the summer season 2000, reflect the composition of soils in addition to anthropogenic activities at these areas. Calcite predominated in the central region whereas calcite and quartz are the dominant minerals in south Jordan. The concentrations of Hg, Cr, Ni, Cu, Pb and Zn were higher in central Jordan, which might be attributed to higher anthropogenic activities than south. On the other hand, Fe, Mn, Ti, Ba, Sr, Y and Rb were higher in the south of Jordan reflecting the composition of soil at these sites. At Aqaba city, the only port of Jordan, where Cr, Cd, As and S were higher than other areas. This variation might be attributed to the contribution of phosphate dust in the atmosphere through handling processes.

Natural food colourants derived from onion wastes: application in a yoghurt product.

PubMed

Mourtzinos, Ioannis; Prodromidis, Prodromos; Grigorakis, Spyros; Makris, Dimitris P; Biliaderis, Costas G; Moschakis, Thomas

2018-06-10

The valorization of onion (Allium cepa) solid wastes, a 450,000 tonnes/year waste in Europe, by a green extraction method is presented. Polyphenols of onion solid wastes were extracted using eco-friendly solvents, such as water and glycerol. The 2-hydroxypropyl-β-cyclodextrin was also used as a co-solvent for the augmentation of the extraction yield. The process has been optimized by implementing a central composite face centered design of experiments, with two replicates in the central point, taking into consideration the following independent variables: glycerol concentration, cyclodextrin concentration and temperature. The assessment of the extraction model was based on two responses: the total pigment yield and the antiradical capacity. LC-MS analysis was also employed in order to identify polyphenols and colourants of the obtained extracts. The main polyphenols found were quercetin and quercetin derivatives and the main colourant was cyanidin 3-O-glucoside. The extract was also tested as a food colourant in a yoghurt matrix. The onion leaf extract was found to be a stable natural colourant and could be utilized as an alternative ingredient to synthetic coloring agents. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Pre-treatment Conditions of Herpetofaunal Communities on Missouri Ozark Forest Ecosystem Project (MOFEP) Sites, 1992-1995

Treesearch

Rochelle B. Renken

1997-01-01

I examined the species composition, species richness, and relative abundance of herpetofaunal communities on southwest-facing and northeast-facing slopes on the MOFEP sites. For the landscape-scale investigations, herpetofaunal communities on southwest- facing slopes were relatively similar, averaged 23.4 species/site, and had relative abundance estimates ranging from...

Geochemistry of siliciclastic rocks in the Peninsular, Chugach, and Prince William terranes: Implications for the tectonic evolution of south central Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, S.A.; Casey, J.F.; Bradley, D.

1992-01-01

According to some interpretations, south-central Alaska consists of a series of unrelated terranes juxtaposed by dominantly strike-slip motions some time after formation. Alternatively, these so-called terranes may be related components of a seaward-facing arc, forearc, and accretionary prism. To shed new light on the tectonic history of this area, 150 samples of siliciclastic rocks were analyzed for major, trace, and rare earth elements (REE). Shales were sampled from the Upper Cretaceous Matanuska and Paleogene Chickaloon Fms. of the Peninsular Terrane (forearc basin); argillaceous melange matrix from the Mesozoic McHugh Complex and slate from turbidites of the Upper Cretaceous Valdez Groupmore » of the Chugach Terrane (landward part of accretionary prism); and slate from turbidites of the Paleogene Orea Group of the Prince William Terrane (seaward part of accretionary prism). One tectonic model that may fit these geochemical data requires an early linkage between the Peninsular and Chugach-Prince William composite terranes. The geochemical signatures suggest that the McHugh Complex was derived from a mafic volcanic source and may represent an early accretionary stage of sediments derived from an oceanic arc. The progressive continental enrichment of the Valdez and Orca Groups may reflect later accretionary processes during and/or after the collision of the Talkectna arc with the North American continent. The similar increasingly continental source documented in the geochemistry of the forearc basin shales of the Matanuska and Chickaloon Fms. may suggest: that the presently defined Peninsular, Chugach, and Prince William terranes collectively represent one continuously evolving, seaward facing arc, forearc, and accretionary prism complex.« less

Managing Brain Extracellular K+ during Neuronal Activity: The Physiological Role of the Na+/K+-ATPase Subunit Isoforms

PubMed Central

Larsen, Brian Roland; Stoica, Anca; MacAulay, Nanna

2016-01-01

During neuronal activity in the brain, extracellular K+ rises and is subsequently removed to prevent a widespread depolarization. One of the key players in regulating extracellular K+ is the Na+/K+-ATPase, although the relative involvement and physiological impact of the different subunit isoform compositions of the Na+/K+-ATPase remain unresolved. The various cell types in the brain serve a certain temporal contribution in the face of network activity; astrocytes respond directly to the immediate release of K+ from neurons, whereas the neurons themselves become the primary K+ absorbers as activity ends. The kinetic characteristics of the catalytic α subunit isoforms of the Na+/K+-ATPase are, partly, determined by the accessory β subunit with which they combine. The isoform combinations expressed by astrocytes and neurons, respectively, appear to be in line with the kinetic characteristics required to fulfill their distinct physiological roles in clearance of K+ from the extracellular space in the face of neuronal activity. Understanding the nature, impact and effects of the various Na+/K+-ATPase isoform combinations in K+ management in the central nervous system might reveal insights into pathological conditions such as epilepsy, migraine, and spreading depolarization following cerebral ischemia. In addition, particular neurological diseases occur as a result of mutations in the α2- (familial hemiplegic migraine type 2) and α3 isoforms (rapid-onset dystonia parkinsonism/alternating hemiplegia of childhood). This review addresses aspects of the Na+/K+-ATPase in the regulation of extracellular K+ in the central nervous system as well as the related pathophysiology. Understanding the physiological setting in non-pathological tissue would provide a better understanding of the pathological events occurring during disease. PMID:27148079

Double bowl piston

DOEpatents

Meffert, Darrel Henry; Urven, Jr., Roger Leroy; Brown, Cory Andrew; Runge, Mark Harold

2007-03-06

A piston for an internal combustion engine is disclosed. The piston has a piston crown with a face having an interior annular edge. The piston also has first piston bowl recessed within the face of the piston crown. The first piston bowl has a bottom surface and an outer wall. A line extending from the interior annular edge of the face and tangent with the outer wall forms an interior angle greater than 90 degrees with the face of the piston. The piston also has a second piston bowl that is centrally located and has an upper edge located below a face of the piston crown.

A New Freshman Composition Pedagogy for Christian Colleges and Universities

ERIC Educational Resources Information Center

Florin Crider, Amy Leigh

2017-01-01

Freshman composition instructors at Christian institutions face a disturbing predicament: competing pedagogies, administrative pressure to prove freshman composition's merit, public clamoring for greater return on the college investment, technology redefining what "writing" is, a postmodern audience, and most concerning, the challenge to…

Face-space: A unifying concept in face recognition research.

PubMed

Valentine, Tim; Lewis, Michael B; Hills, Peter J

2016-10-01

The concept of a multidimensional psychological space, in which faces can be represented according to their perceived properties, is fundamental to the modern theorist in face processing. Yet the idea was not clearly expressed until 1991. The background that led to the development of face-space is explained, and its continuing influence on theories of face processing is discussed. Research that has explored the properties of the face-space and sought to understand caricature, including facial adaptation paradigms, is reviewed. Face-space as a theoretical framework for understanding the effect of ethnicity and the development of face recognition is evaluated. Finally, two applications of face-space in the forensic setting are discussed. From initially being presented as a model to explain distinctiveness, inversion, and the effect of ethnicity, face-space has become a central pillar in many aspects of face processing. It is currently being developed to help us understand adaptation effects with faces. While being in principle a simple concept, face-space has shaped, and continues to shape, our understanding of face perception.

Armor-Rolled: Metallurgical Examination of British Homogenous and Face Hardened Armor

DTIC Science & Technology

1945-02-10

Brinell Mtgr. ,.nd of Thickness Hardness Type Composition Iom. T~ektesg Plate Inches MM. Face Core C Mn Ni "r Mo V "E.S.Co., 70mm. Homo. 2.74 69.6...the above analyses are used for projectile testing plate, but only the composition from which the Firth Brown 12O)mm. plate wrn frbricated is knuwn...satisfactory steel soundness in regard to freedom from pronounced laminat ions. Bevere segrega~tions of small ovJ. shaped nonmetvallic inclusions

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor.

PubMed

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-03-31

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face.

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor

PubMed Central

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-01-01

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face. PMID:28362349

Expenditure and Revenue Problems in Central-City School Districts: Problems for the 1980s.

ERIC Educational Resources Information Center

Murphy, Joseph F.; Hack, Walter G.

1983-01-01

Investigates the combination of expenditure and revenue problems facing central-city school districts. Examines educational overburden, related overburden, and cost differentials between central city and other types of districts. Also looks at tax capacity and efforts, and analyzes the effects of Federal and State activity on the problems of city…

Entrepreneurial and Vocational Education and Training: Lessons from Eastern and Central Europe

ERIC Educational Resources Information Center

Mitra, Jay; Matlay, Harry

2004-01-01

The social, economic and political systems of former communist countries have faced considerable changes since the late 1980s. Most countries in Eastern and Central Europe have undergone their own individual brand of transition from a centrally planned, command system to a more or less liberalized, Western-style market economy. Many observers…

Private Higher Education in a Cold War World: Central America

ERIC Educational Resources Information Center

Harrington, James J.

2009-01-01

In Central America the Cold War support of the elites by the United States was designed to ward off the communist threat. At the same time social and economic demands by the working and middle classes created revolutionary movements in the face of rigid and violent responses by Central American governments. Issues of social justice pervaded the…

Cure width potential for MOD resin composite molar restorations.

PubMed

Palin, William M; Senyilmaz, Dilek P; Marquis, Peter M; Shortall, Adrian C

2008-08-01

To investigate the capability of modern light-curing units exhibiting differences in emission spectra and light source exit window dimensions, for "one-shot" full-width curing of extensive (molar MOD) resin composite restorations. Specimens of Tetric (TT), Tetric Ceram HB (TC), Tetric Evoceram (TE) and Tetric Ceram Bleach (TB) resin composites containing varying ratios of Lucirin (TPO) and/or camphorquinone (CQ) photoinitiators were packed into a bar-shaped mould (12 mm length x 2 mm width x 2 mm thickness). Each product was irradiated using a halogen (Optilux 401; QTH), a conventional LED (LEDemetron; LED) and two so-called "third generation" oval-footprint LED light-curing units (LCUs) of the same model. The latter featured bimodal emission spectra (blue and ultraviolet diodes) with either high (unmodified output) and approximately 50% (modified output) blue light intensity (UltraLume-5; ULs, ULm, respectively). Vickers hardness number was obtained across the lateral extent of the bar at 1mm increments from the centre point on both upper and lower surfaces of the specimens. Significant linear relationships (R(2)=0.71-0.98) for each distance from the central position of all LCUs were identified between measured light intensity and corresponding upper and lower surface hardness values for each product (P<0.05). No significant differences (P>0.05) were recorded in total upper surface hardness of TC or TE cured with LED (68.7+/-3.2 and 70.5+/-2.5) or ULm (56.8+/-2.0 and 57.7+/-2.0). However, upper surface hardness of TT (CQ only) cured with ULm was significantly decreased (P<0.05) compared with other LCUs. When the ratio of hardness at the edge to central positions of the bar-shaped specimens for either surface was calculated, no significant difference (P>0.05) was identified for TB (containing TPO and decreased CQ) cured with either ULs or ULm (P>0.05) and was significantly increased (P<0.05) when cured with ULs compared with LED and QTH. Variability in light intensity across the curing-tip face, spectral output of dental light-curing units and differences in product photoinitiator chemistry all influence curing efficiency significantly across the width of extensive resin composite geometries.

Direct Resin Composite Restoration of Maxillary Central Incisors with Fractured Tooth Fragment Reattachment: Case Report.

PubMed

Szmidt, Monika; Górski, Maciej; Barczak, Katarzyna; Buczkowska-Radlińska, Jadwiga

This article presents a clinical protocol to reconstruct two accidentally damaged maxillary central incisors using composite resin material and a fractured tooth component. A patient was referred to the clinic with fracture of the two maxillary central incisors. Clinical examination revealed that both teeth were fractured in the middle third of the crown and that the fractures involved enamel and dentin with no pulp exposure. The patient had also suffered a lower lip laceration. When the lip was evaluated, a fractured fragment of the maxillary right central incisor was found inside the wound. The missing part of the tooth was replaced via adhesive attachment. Due to the damage of the fractured part of the maxillary left central incisor, direct composite restoration of this tooth was performed. With the advent of adhesive dentistry, the process of fragment reattachment has become simplified and more reliable. This procedure provides improved function, is faster to perform, and provides long-lasting effects, indicating that reattachment of a coronal fragment is a realistic alternative to placement of conventional resin composite restorations.

Impaired holistic processing of left-right composite faces in congenital prosopagnosia.

PubMed

Liu, Tina T; Behrmann, Marlene

2014-01-01

Congenital prosopagnosia (CP) refers to a lifelong impairment in face processing despite normal visual and intellectual skills. Many studies have suggested that the key underlying deficit in CP is one of a failure to engage holistic processing. Moreover, there has been some suggestion that, in normal observers, there may be greater involvement of the right than left hemisphere in holistic processing. To examine the proposed deficit in holistic processing and its potential hemispheric atypicality in CP, we compared the performance of 8 CP individuals with both matched controls and a large group of non-matched controls on a novel, vertical composite task. In this task, participants judged whether a cued half of a face (either left or right half) was the same or different at study and test, and the two face halves could be either aligned or misaligned. The standard index of holistic processing is one in which the unattended face half influences performance on the cued half and this influence is greater in the aligned than in the misaligned condition. Relative to controls, the CP participants, both at a group and at an individual level, did not show holistic processing in the vertical composite task. There was also no difference in performance as a function of hemifield of the cued face half in the CP individuals, and this was true in the control participants, as well. The findings clearly confirm the deficit in holistic processing in CP and reveal the useful application of this novel experimental paradigm to this population and potentially to others as well.

Visual cryptography for face privacy

NASA Astrophysics Data System (ADS)

Ross, Arun; Othman, Asem A.

2010-04-01

We discuss the problem of preserving the privacy of a digital face image stored in a central database. In the proposed scheme, a private face image is dithered into two host face images such that it can be revealed only when both host images are simultaneously available; at the same time, the individual host images do not reveal the identity of the original image. In order to accomplish this, we appeal to the field of Visual Cryptography. Experimental results confirm the following: (a) the possibility of hiding a private face image in two unrelated host face images; (b) the successful matching of face images that are reconstructed by superimposing the host images; and (c) the inability of the host images, known as sheets, to reveal the identity of the secret face image.

Transportation Infrastructure: Central Artery/Tunnel Project Faces Continued Financial Uncertainties

DOT National Transportation Integrated Search

1996-05-01

At a cost of over $1 billion a mile, the Central Artery/Tunnel project - an Interstate Highway System project in Boston, Massachusetts - is one of the largest, most complex, and most expensive highway construction projects ever undertaken. In respons...

FACILITY 847, DETAIL OF A CENTRAL STAIRWELL BETWEEN SECOND AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 847, DETAIL OF A CENTRAL STAIRWELL BETWEEN SECOND AND THIRD FLOORS, QUADRANGLE J, VIEW FACING SOUTHEAST. - Schofield Barracks Military Reservation, Quadrangles I & J Barracks Type, Between Wright-Smith & Capron Avenues near Williston Avenue, Wahiawa, Honolulu County, HI

Temporal patterns of woody species diversity in a central Appalachian forest from 1856 to 1997

Treesearch

Thomas M. Schuler; Andrew R. Gillespie

2000-01-01

This study examined the composition of woody species in a mixed mesophytic forest in the central Appalachian region with respect to both time and different disturbance regimes. Species composition and diversity were assessed from 1856 to 1997 on a tract of land that currently is part of the Fernow Experimental Forest in north-central West Virginia. Additionally, the...

Organic matrix composite protective coatings for space applications

NASA Technical Reports Server (NTRS)

Dursch, Harry W.; George, Pete

1995-01-01

Successful use of composites in low earth orbit (LEO) depends on their ability to survive long-term exposure to atomic oxygen (AO), ultraviolet radiation, charged particle radiation, thermal cycling, and micrometeoroid and space debris. The AO environment is especially severe for unprotected organic matrix composites surfaces in LEO. Ram facing unprotected graphite/epoxy flown on the 69-month Long Duration Exposure Facility (LDEF) mission lost up to one ply of thickness (5 mils) resulting in decreased mechanical properties. The expected AO fluence of the 30 year Space Station Alpha mission is approximately 20 times that seen on LDEF. This exposure would result in significant material loss of unprotected ram facing organic matrix composites. Several protective coatings for composites were flown on LDEF including anodized aluminum, vacuum deposited coatings, a variety of thermal control coatings, metalized Teflon, and leafing aluminum. Results from the testing and analysis of the coated and uncoated composite specimens flown on LDEF's leading and trailing edges provide the baseline for determining the effectiveness of protectively coated composites in LEO. In addition to LDEF results, results from shuttle flight experiments and ground based testing will be discussed.

Hafnium isotope stratigraphy of ferromanganese crusts

PubMed

Lee; Halliday; Hein; Burton; Christensen; Gunther

1999-08-13

A Cenozoic record of hafnium isotopic compositions of central Pacific deep water has been obtained from two ferromanganese crusts. The crusts are separated by more than 3000 kilometers but display similar secular variations. Significant fluctuations in hafnium isotopic composition occurred in the Eocene and Oligocene, possibly related to direct advection from the Indian and Atlantic oceans. Hafnium isotopic compositions have remained approximately uniform for the past 20 million years, probably reflecting increased isolation of the central Pacific. The mechanisms responsible for the increase in (87)Sr/(86)Sr in seawater through the Cenozoic apparently had no effect on central Pacific deep-water hafnium.

Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments

NASA Technical Reports Server (NTRS)

Ko, William L.; Jackson, Raymond H.

1991-01-01

Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

Thermal Inspection of Composite Honeycomb Structures

NASA Technical Reports Server (NTRS)

Zalameda, Joseph N.; Parker, F. Raymond

2014-01-01

Composite honeycomb structures continue to be widely used in aerospace applications due to their low weight and high strength advantages. Developing nondestructive evaluation (NDE) inspection methods are essential for their safe performance. Pulsed thermography is a commonly used technique for composite honeycomb structure inspections due to its large area and rapid inspection capability. Pulsed thermography is shown to be sensitive for detection of face sheet impact damage and face sheet to core disbond. Data processing techniques, using principal component analysis to improve the defect contrast, are presented. In addition, limitations to the thermal detection of the core are investigated. Other NDE techniques, such as computed tomography X-ray and ultrasound, are used for comparison to the thermography results.

Shear bond strength of composite bonded with three adhesives to Er,Cr:YSGG laser-prepared enamel.

PubMed

Türkmen, Cafer; Sazak-Oveçoğlu, Hesna; Günday, Mahir; Güngör, Gülşad; Durkan, Meral; Oksüz, Mustafa

2010-06-01

To assess in vitro the shear bond strength of a nanohybrid composite resin bonded with three adhesive systems to enamel surfaces prepared with acid and Er,Cr:YSGG laser etching. Sixty extracted caries- and restoration-free human maxillary central incisors were used. The teeth were sectioned 2 mm below the cementoenamel junction. The crowns were embedded in autopolymerizing acrylic resin with the labial surfaces facing up. The labial surfaces were prepared with 0.5-mm reduction to receive composite veneers. Thirty specimens were etched with Er,Cr:YSGG laser. This group was also divided into three subgroups, and the following three bonding systems were then applied on the laser groups and the other three unlased groups: (1) 37% phosphoric acid etch + Bond 1 primer/adhesive (Pentron); (2) Nano-bond self-etch primer (Pentron) + Nano-bond adhesive (Pentron); and (3) all-in-one adhesive-single dose (Futurabond NR, Voco). All of the groups were restored with a nanohybrid composite resin (Smile, Pentron). Shear bond strength was measured with a Zwick universal test device with a knife-edge loading head. The data were analyzed with two-factor ANOVA. There were no significant differences in shear bond strength between self-etch primer + adhesive and all-in-one adhesive systems for nonetched and laser-etched enamel groups (P > .05). However, bond strength values for the laser-etched + Bond 1 primer/adhesive group (48.00 +/- 13.86 MPa) were significantly higher than the 37% phosphoric acid + Bond 1 primer/adhesive group (38.95 +/- 20.07 MPa) (P < .05). The Er,Cr:YSGG laser-powered hydrokinetic system etched the enamel surface more effectively than 37% phosphoric acid for subsequent attachment of composite material.

Promoting inclusive water governance and forecasting the structure of water consumption based on compositional data: A case study of Beijing.

PubMed

Wei, Yigang; Wang, Zhichao; Wang, Huiwen; Yao, Tang; Li, Yan

2018-09-01

Water is centrally important for agricultural security, environment, people's livelihoods, and socio-economic development, particularly in the face of extreme climate changes. Due to water shortages in many cities, the conflicts between various stakeholders and sectors over water use and allocation are becoming more common and intense. Effective inclusive governance of water use is critical for relieving water use conflicts. In addition, reliable forecasting of the structure of water usage among different sectors is a basic need for effective water governance planning. Although a large number of studies have attempted to forecast water use, little is known about the forecasted structure and trends of water use in the future. This paper aims to develop a forecasting model for the structure of water usage based on compositional data. Compositional data analysis is an effective approach for investigating the internal structure of a system. A host of data transformation methods and forecasting models were adopted and compared in order to derive the best-performing model. According to mean absolute percent error for compositional data (CoMAPE), a hyperspherical-transformation-based vector autoregression model for compositional data (VAR-DRHT) is the best-performing model. The proportions of the agricultural, industrial, domestic and environmental water will be 6.11%, 5.01%, 37.48% and 51.4% by 2020. Several recommendations for water inclusive development are provided to give a better account for the optimization of the water use structure, alleviation of water shortages, and improving stake holders' wellbeing. Overall, although we focus on groundwater, this study presents a powerful framework broadly applicable to resource management. Copyright © 2018 Elsevier B.V. All rights reserved.

Pixelized Device Control Actuators for Large Adaptive Optics

NASA Technical Reports Server (NTRS)

Knowles, Gareth J.; Bird, Ross W.; Shea, Brian; Chen, Peter

2009-01-01

A fully integrated, compact, adaptive space optic mirror assembly has been developed, incorporating new advances in ultralight, high-performance composite mirrors. The composite mirrors use Q-switch matrix architecture-based pixelized control (PMN-PT) actuators, which achieve high-performance, large adaptive optic capability, while reducing the weight of present adaptive optic systems. The self-contained, fully assembled, 11x11x4-in. (approx.= 28x28x10-cm) unit integrates a very-high-performance 8-in. (approx.=20-cm) optic, and has 8-kHz true bandwidth. The assembled unit weighs less than 15 pounds (=6.8 kg), including all mechanical assemblies, power electronics, control electronics, drive electronics, face sheet, wiring, and cabling. It requires just three wires to be attached (power, ground, and signal) for full-function systems integration, and uses a steel-frame and epoxied electronics. The three main innovations are: 1. Ultralightweight composite optics: A new replication method for fabrication of very thin composite 20-cm-diameter laminate face sheets with good as-fabricated optical figure was developed. The approach is a new mandrel resin surface deposition onto previously fabricated thin composite laminates. 2. Matrix (regenerative) power topology: Waveform correction can be achieved across an entire face sheet at 6 kHz, even for large actuator counts. In practice, it was found to be better to develop a quadrant drive, that is, four quadrants of 169 actuators behind the face sheet. Each quadrant has a single, small, regenerative power supply driving all 169 actuators at 8 kHz in effective parallel. 3. Q-switch drive architecture: The Q-switch innovation is at the heart of the matrix architecture, and allows for a very fast current draw into a desired actuator element in 120 counts of a MHz clock without any actuator coupling.

Effects of CSF hormones and ionic composition on salt/water metabolism

NASA Technical Reports Server (NTRS)

Severs, Walter B.

1992-01-01

The consequences of headward fluid shifts during manned spaceflight was studied. Such shifts were recognized early by both U.S. and Soviet scientists because of signs and symptoms referable to the head. Some of these include disturbed vision, puffiness in the face and periorbital areas, headache, vestibular dysfunction, and distended jugular veins. We posited that the fluid shift had an immediate effect on the brain and a long-term action requiring a neural interpretation of the flight environment. This would re-adjust both efferent neural as well as hormonal mechanisms to sustain cardiovascular and fluid/electrolyte balance consonent with survival in microgravity. Work along these lines is summarized. A synopsis of some of the main research is presented. The following topics were studied: (1) angiotensin and vasopressin action in the central nervous system; (2) intracranial pressure control; (3) research on subcommissural organ; and (4) research on the eye.

Vertical transport in isotype InAlN/GaN dipole induced diodes grown by molecular beam epitaxy

NASA Astrophysics Data System (ADS)

Fireman, M. N.; Li, Haoran; Keller, Stacia; Mishra, Umesh K.; Speck, James S.

2017-05-01

InAlN dipole diodes were developed and fabricated on both (0001) Ga-Face and (" separators="| 000 1 ¯) N-face oriented GaN on sapphire templates by molecular beam epitaxy. The orientation and direction of the InAlN polarization dipole are functions of the substrate orientation and composition, respectively. Special consideration was taken to minimize growth differences and impurity uptake during growth on these orientations of opposite polarity. Comparison of devices on similarly grown structures with In compositions in excess of 50% reveals that dipole diodes shows poorer forward bias performance and exhibited an increase in reverse bias leakage, regardless of orientation. Similarly, (0001) Ga-face oriented InAlN at a lowered 40% In composition had poor device characteristics, namely, the absence of expected exponential turn on in forward bias. By contrast, at In compositions close to 40%, (" separators="| 000 1 ¯) N-face oriented InAlN devices had excellent performance, with over five orders of magnitude of rectification and extracted barrier heights of 0.53- 0.62 eV; these values are in close agreement with simulation. Extracted ideality factors ranging from 1.08 to 1.38 on these devices are further evidence of their optimal performance. Further discussion focuses on the growth and orientation conditions that may lead to this discrepancy yet emphasizes that with proper design and growth strategy, the rectifying dipole diodes can be achieved with InAlN nitride dipole layers.

Contoured inner after-heater shield for reducing stress in growing crystalline bodies

DOEpatents

Kalejs, Juris P.

1996-09-24

An apparatus for growing hollow crystalline bodies by the EFG process, comprising an EFG die having a top surface shaped for growing a hollow crystalline body having a cross-sectional configuration in the shape of a polygon having n faces, and a radiation shield adjacent to and surrounded by the top end surface of the die, characterized in that the shield has an inner edge defining a similar polygon with n sides, and the inner edge of the shield is notched so that the spacing between the n faces and the n sides is greatest between the central portions of the n faces and the n sides, whereby the greater spacing at the central portions helps to reduce lateral temperature gradients in the crystalline body that is grown by use of the die.

Sibling Composition and Child Educational Attainment: Evidence from Native Amazonians in Bolivia

ERIC Educational Resources Information Center

Zeng, Wu; Undurraga, Eduardo A.; Eisenberg, Dan T. A.; Rubio-Jovel, Karla; Reyes-Garcia; Victoria; Godoy, Ricardo

2012-01-01

Evidence from industrial nations suggests that sibling composition is associated with children's educational attainment, particularly if parents face resource constraints. If sibling composition is associated with educational attainment, then those associations should be stronger in poor societies of developing nations. We use data from a…

Regional Strategic Appraisal of Central America

DTIC Science & Technology

2003-04-07

effective region, to increase its competitiveness in the face of the challenges from globalization . Therefore, I recommend a deepening of the regional...centroamericanos, 1970 a 1999, Mexico City, Mach 2000. 7 Agosin, Bloom and Gitli, Globalization , Liberalization, and Sustainable Human Development in Central...Bloom, and Eduardo Gitli, “ Globalization , Liberalization, and Sustainable Human Development in Central America,” February, 2000; available from <http

An Exploratory Study of Central Office Best Practices in Washington's Top 5% Performing School Districts

ERIC Educational Resources Information Center

Ansingh, Pamela Jean

2012-01-01

How prepared are central office administrators to lead school districts in the face of changing standards and changing student populations? The purpose of this mixed methods study was to examine the responses of central office administrators in the top 5% performing school districts in Washington State with the goal of identifying common attitudes…

Toward DNA-based facial composites: preliminary results and validation.

PubMed

Claes, Peter; Hill, Harold; Shriver, Mark D

2014-11-01

The potential of constructing useful DNA-based facial composites is forensically of great interest. Given the significant identity information coded in the human face these predictions could help investigations out of an impasse. Although, there is substantial evidence that much of the total variation in facial features is genetically mediated, the discovery of which genes and gene variants underlie normal facial variation has been hampered primarily by the multipartite nature of facial variation. Traditionally, such physical complexity is simplified by simple scalar measurements defined a priori, such as nose or mouth width or alternatively using dimensionality reduction techniques such as principal component analysis where each principal coordinate is then treated as a scalar trait. However, as shown in previous and related work, a more impartial and systematic approach to modeling facial morphology is available and can facilitate both the gene discovery steps, as we recently showed, and DNA-based facial composite construction, as we show here. We first use genomic ancestry and sex to create a base-face, which is simply an average sex and ancestry matched face. Subsequently, the effects of 24 individual SNPs that have been shown to have significant effects on facial variation are overlaid on the base-face forming the predicted-face in a process akin to a photomontage or image blending. We next evaluate the accuracy of predicted faces using cross-validation. Physical accuracy of the facial predictions either locally in particular parts of the face or in terms of overall similarity is mainly determined by sex and genomic ancestry. The SNP-effects maintain the physical accuracy while significantly increasing the distinctiveness of the facial predictions, which would be expected to reduce false positives in perceptual identification tasks. To the best of our knowledge this is the first effort at generating facial composites from DNA and the results are preliminary but certainly promising, especially considering the limited amount of genetic information about the face contained in these 24 SNPs. This approach can incorporate additional SNPs as these are discovered and their effects documented. In this context we discuss three main avenues of research: expanding our knowledge of the genetic architecture of facial morphology, improving the predictive modeling of facial morphology by exploring and incorporating alternative prediction models, and increasing the value of the results through the weighted encoding of physical measurements in terms of human perception of faces. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

PBF (PER620) south facade. Camera facing north. Note pedestrian bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) south facade. Camera facing north. Note pedestrian bridge crossing over conduit. Central high bay contains reactor room and canal. Date: March 2004. INEEL negative no. HD-41-2-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Development Strategies for Online Volunteer Training Modules: A Team Approach

ERIC Educational Resources Information Center

Robideau, Kari; Vogel, Eric

2014-01-01

Volunteers are central to the delivery of 4-H programs, and providing quality, relevant training is key to volunteer success. Online, asynchronous modules are an enhancement to a training delivery menu for adult volunteers, providing consistent, accessible options traditionally delivered primarily face to face. This article describes how Minnesota…

The many faces of research on face perception.

PubMed

Little, Anthony C; Jones, Benedict C; DeBruine, Lisa M

2011-06-12

Face perception is fundamental to human social interaction. Many different types of important information are visible in faces and the processes and mechanisms involved in extracting this information are complex and can be highly specialized. The importance of faces has long been recognized by a wide range of scientists. Importantly, the range of perspectives and techniques that this breadth has brought to face perception research has, in recent years, led to many important advances in our understanding of face processing. The articles in this issue on face perception each review a particular arena of interest in face perception, variously focusing on (i) the social aspects of face perception (attraction, recognition and emotion), (ii) the neural mechanisms underlying face perception (using brain scanning, patient data, direct stimulation of the brain, visual adaptation and single-cell recording), and (iii) comparative aspects of face perception (comparing adult human abilities with those of chimpanzees and children). Here, we introduce the central themes of the issue and present an overview of the articles.

Chemical mixing model studies of lunar orbital geochemical data - Apollo 16 and 17 highlands compositions

NASA Technical Reports Server (NTRS)

Spudis, P. D.; Hawke, B. R.

1982-01-01

Chemical mixing model studies of lunar geochemical data for the central and Taurus-Littrow lunar highlands were performed utilizing pristine highland rock types as end member compositions. The central highlands show considerable diversity in composition; anorthosite is the principal rock type in the Apollo 16/Descartes region, while norite predominates in the highlands west of the landing site. This change in crustal composition is coincident with a major color boundary seen in earth-based multispectral data and probably represents the presence of distinct geochemical provinces within the central highlands. The Taurus-Littrow highlands are dominated by norite; anorthosite is far less abundant than in the central highlands. This suggests that the impact target for the Serenitatis basin was different than that of the Nectaris basin and further strengthens the hypothesis that the lunar highlands are petrologically heterogeneous on a regional basis. It is suggested that the lunar highlands should be viewed in terms of geochemical provinces that have undergone distinct and complex igneous and impact histories.

Ultrasonic Nondestructive Evaluation Techniques Applied to the Quantitative Characterization of Textile Composite Materials

NASA Technical Reports Server (NTRS)

Miller, James G.

1998-01-01

An overall goal of this research has been to enhance our understanding of the scientific principles necessary to develop advanced ultrasonic nondestructive techniques for the quantitative characterization of advanced composite structures. To this end, we have investigated a thin woven composite (5-harness biaxial weave). We have studied the effects that variations of the physical parameters of the experimental setup can have on the ultrasonic determination of the material properties for this thin composite. In particular, we have considered the variation of the nominal center frequency and the f-number of the transmitting transducer which in turn address issues such as focusing and beam spread of ultrasonic fields. This study has employed a planar, two-dimensional, receiving pseudo-array that has permitted investigation of the diffraction patterns of ultrasonic fields. Distortion of the ultrasonic field due to the spatial anisotropy of the thin composite has prompted investigation of the phenomenon of phase cancellation at the face of a finite-aperture, piezoelectric receiver. We have performed phase-sensitive and phase-insensitive analyses to provide a measure of the amount of phase cancellation at the face of a finite-aperture, piezoelectric receiver. The pursuit of robust measurements of received energy (i.e., those not susceptible to phase cancellation at the face of a finite-aperture, piezoelectric receiver) supports the development of robust techniques to determine material properties from measure ultrasonic parameters.

Composite multilobe descriptors for cross-spectral recognition of full and partial face

NASA Astrophysics Data System (ADS)

Cao, Zhicheng; Schmid, Natalia A.; Bourlai, Thirimachos

2016-08-01

Cross-spectral image matching is a challenging research problem motivated by various applications, including surveillance, security, and identity management in general. An example of this problem includes cross-spectral matching of active infrared (IR) or thermal IR face images against a dataset of visible light images. A summary of recent developments in the field of cross-spectral face recognition by the authors is presented. In particular, it describes the original form and two variants of a local operator named composite multilobe descriptor (CMLD) for facial feature extraction with the purpose of cross-spectral matching of near-IR, short-wave IR, mid-wave IR, and long-wave IR to a gallery of visible light images. The experiments demonstrate that the variants of CMLD outperform the original CMLD and other recently developed composite operators used for comparison. In addition to different IR spectra, various standoff distances from close-up (1.5 m) to intermediate (50 m) and long (106 m) are also investigated. Performance of CMLD I to III is evaluated for each of the three cases of distances. The newly developed operators, CMLD I to III, are further utilized to conduct a study on cross-spectral partial face recognition where different facial regions are compared in terms of the amount of useful information they contain for the purpose of conducting cross-spectral face recognition. The experimental results show that among three facial regions considered in the experiments the eye region is the most informative for all IR spectra at all standoff distances.

Face-Sheet Quality Analysis and Thermo-Physical Property Characterization of OOA and Autoclave Panels

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Lort, Richard D., III; Zimmerman, Thomas J.; Sutter, James K.; Pelham, Larry I.; McCorkle, Linda S.; Scheiman, Daniel A.

2012-01-01

Increased application of polymer matrix composite (PMC) materials in large vehicle structures requires consideration of non-autoclave manufacturing technology. The NASA Composites for Exploration project, and its predecessor, Lightweight Spacecraft Structures and Materials project, were tasked with the development of materials and manufacturing processes for structures that will perform in a heavy-lift-launch vehicle environment. Both autoclave and out of autoclave processable materials were considered. Large PMC structures envisioned for such a vehicle included the payload shroud and the interstage connector. In this study, composite sandwich panels representing 1/16th segments of the barrel section of the Ares V rocket fairing were prepared as 1.8 m x 2.4 m sections of the 10 m diameter arc segment. IM7/977-3 was used as the face-sheet prepreg of the autoclave processed panels and T40-800B/5320-1 for the out of autoclave panels. The core was 49.7 kg/sq m (3.1 lb/cu ft (pcf)) aluminum honeycomb. Face-sheets were fabricated by automated tape laying 153 mm wide unidirectional tape. This work details analysis of the manufactured panels where face-sheet quality was characterized by optical microscopy, cured ply thickness measurements, acid digestion, and thermal analysis.

Face-Sheet Quality Analysis and Thermo-Physical Property Characterization of OOA and Autoclave Panels

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Lort, Richard D., III; Zimmerman, Thomas J.; Sutter, James K.; Pelham, Larry I.; McCorkle, Linda S.; Scheiman, Daniel A.

2012-01-01

Increased application of polymer matrix composite (PMC) materials in large vehicle structures requires consideration of non-autoclave manufacturing technology. The NASA Composites for Exploration project, and its predecessor, Lightweight Spacecraft Structures and Materials project, were tasked with the development of materials and manufacturing processes for structures that will perform in a heavy-lift-launch vehicle environment. Both autoclave and out of autoclave processable materials were considered. Large PMC structures envisioned for such a vehicle included the payload shroud and the interstage connector. In this study, composite sandwich panels representing 1/16th segments of the barrel section of the Ares V rocket fairing were prepared as 1.8 m x 2.4 m sections of the 10 m diameter arc segment. IM7/977-3 was used as the face-sheet prepreg of the autoclave processed panels and T40-800B/5320-1 for the out of autoclave panels. The core was 49.7 kilograms per square meters (3.1 pounds per cubic feet (pcf)) aluminum honeycomb. Face-sheets were fabricated by automated tape laying 153 mm wide unidirectional tape. This work details analysis of the manufactured panels where face-sheet quality was characterized by optical microscopy, cured ply thickness measurements, acid digestion, and thermal analysis.

International SAMPE Symposium and Exhibition, 35th, Anaheim, CA, Apr. 2-5, 1990, Proceedings. Books 1 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janicki, G.; Bailey, V.; Schjelderup, H.

The present conference discusses topics in the fields of ultralightweight structures, producibility of thermoplastic composites, innovation in sandwich structures, composite failure processes, toughened materials, metal-matrix composites, advanced materials for future naval systems, thermoplastic polymers, automated composites manufacturers, advanced adhesives, emerging processes for aerospace component fabrication, and modified resin systems. Also discussed are matrix behavior for damage tolerance, composite materials repair, testing for damage tolerance, composite strength analyses, materials workplace health and safety, cost-conscious composites, bismaleimide systems, and issues facing advanced composite materials suppliers.

Electron Beam Exposure of Thermal Control Paints on Carbon-Carbon and Carbon-Polyimide Composites

NASA Technical Reports Server (NTRS)

Jaworske, Donald A.

2006-01-01

Carbon-carbon and carbon-polyimide composites are being considered for use as radiator face sheets or fins for space radiator applications. Several traditional white thermal control paints are being considered for the surface of the composite face sheets or fins. One threat to radiator performance is high energy electrons. The durability of the thermal control paints applied to the carbon-carbon and carbon-polyimide composites was evaluated after extended exposure to 4.5 MeV electrons. Electron exposure was conducted under argon utilizing a Mylar(TradeMark) bag enclosure. Solar absorptance and infrared emittance was evaluated before and after exposure to identify optical properties degradation. Adhesion of the paints to the carbon-carbon and carbon-polyimide composite substrates was also of interest. Adhesion was evaluated on pristine and electron beam exposed coupons using a variation of the ASTM D-3359 tape test. Results of the optical properties evaluation and the adhesion tape tests are summarized.

Method for optical pumping of thin laser media at high average power

DOEpatents

Zapata, Luis E [Livermore, CA; Beach, Raymond J [Livermore, CA; Honea, Eric C [Sunol, CA; Payne, Stephen A [Castro Valley, CA

2004-07-13

A thin, planar laser material is bonded to a light guide of an index-matched material forming a composite disk. Diode array or other pump light is introduced into the composite disk through the edges of the disk. Pump light trapped within the composite disk depletes as it multi-passes the laser medium before reaching an opposing edge of the disk. The resulting compound optical structure efficiently delivers concentrated pump light and to a laser medium of minimum thickness. The external face of the laser medium is used for cooling. A high performance cooler attached to the external face of the laser medium rejects heat. Laser beam extraction is parallel to the heat flux to minimize optical distortions.

In your face: transcendence in embodied interaction

PubMed Central

Gallagher, Shaun

2014-01-01

In cognitive psychology, studies concerning the face tend to focus on questions about face recognition, theory of mind (ToM) and empathy. Questions about the face, however, also fit into a very different set of issues that are central to ethics. Based especially on the work of Levinas, philosophers have come to see that reference to the face of another person can anchor conceptions of moral responsibility and ethical demand. Levinas points to a certain irreducibility and transcendence implicit in the face of the other. In this paper I argue that the notion of transcendence involved in this kind of analysis can be given a naturalistic interpretation by drawing on recent interactive approaches to social cognition found in developmental psychology, phenomenology, and the study of autism. PMID:25071523

Chemical composition and digestibility of Trifolium exposed to elevated ozone and carbon dioxide in a free-air (FACE) fumigation system

Treesearch

R.B. Muntifering; A.H. Chappelka; J.C. Lin; D.F. Karnosky; G.L. Somers

2006-01-01

Tropospheric ozone (O3) and carbon dioxide (CO2) are significant drivers of plant growth and chemical composition. We hypothesized that exposure to elevated concentrations of O3 and CO2, singly and in combination, would modify the chemical composition of Trifolium...

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Agglutinates as recorders of fossil soil compositions. [of Apollo 17 lunar probes

NASA Technical Reports Server (NTRS)

Taylor, G. J.; Wentworth, S.; Warner, R. D.; Keil, K.

1978-01-01

The composition of agglutinates in polished sections of the Apollo 17 drill core was studied in an attempt to deduce the nature of the Taurus-Littrow valley regolith prior to the formation of the Camelot and Central Cluster craters. The agglutinate compositions in the soils differed from the host soil compositions except for samples from the North Massif. Local materials from the valley floor and the massifs appear to form the pre-Central Cluster regolith. It is also shown that chemical mixing models for bulk soil compositions can be misleading unless the petrologic characteristics of each soil are taken into account.

Total Face, Eyelids, Ears, Scalp, and Skeletal Subunit Transplant: A Reconstructive Solution for the Full Face and Total Scalp Burn.

PubMed

Sosin, Michael; Ceradini, Daniel J; Levine, Jamie P; Hazen, Alexes; Staffenberg, David A; Saadeh, Pierre B; Flores, Roberto L; Sweeney, Nicole G; Bernstein, G Leslie; Rodriguez, Eduardo D

2016-07-01

Reconstruction of extensive facial and scalp burns can be increasingly challenging, especially in patients that have undergone multiple procedures with less than ideal outcomes resulting in restricting neck and oral contractures, eyelid dysfunction, and suboptimal aesthetic appearance. To establish a reconstructive solution for this challenging deformity, a multidisciplinary team was assembled to develop the foundation to a facial vascularized composite allotransplantation program. The strategy of developing and executing a clinical transplant was derived on the basis of fostering a cohesive and supportive institutional clinical environment, implementing computer software and advanced technology, establishing a cadaveric transplant model, performing a research facial procurement, and selecting an optimal candidate with the aforementioned burn defect who was well informed and had the desire to undergo face transplantation. Approval from the institutional review board and organ procurement organization enabled our face transplant team to successfully perform a total face, eyelids, ears, scalp, and skeletal subunit transplant in a 41-year-old man with a full face and total scalp burn. The culmination of knowledge attained from previous experiences continues to influence the progression of facial vascularized composite allotransplantation. This surgical endeavor methodically and effectively synchronized the fundamental principles of aesthetic, craniofacial, and microvascular surgery to restore appearance and function to a patient suffering from failed conventional surgery for full face and total scalp burns. This procedure represents the most extensive soft-tissue clinical face transplant performed to date. Therapeutic, V.

Voicing the Challenges Faced by an Innovative Teacher Community

ERIC Educational Resources Information Center

Moate, Josephine

2011-01-01

This research draws on sociocultural theories of learning and activity theory to explore the challenges faced by an innovative community of teachers in Central Finland. The aim of the teacher community was to develop a stream of foreign-language (FL)-mediated teaching and learning in the locality from kindergarten to upper secondary level. To…

A Rural County Journeys to the Common Core

ERIC Educational Resources Information Center

Ceballos, Pansy T.

2012-01-01

Small, rural school districts face a special challenge when implementing the next generation of academic standards known as the Common Core State Standards. This is the task facing the instructional consultants with the Tulare County Office of Education. The county, located in central California with its dominant agricultural economy, has 45…

The Challenges Facing School Governing Bodies in England: A "Perfect Storm"?

ERIC Educational Resources Information Center

James, Chris; Brammer, Steve; Connolly, Michael; Spicer, David Eddy; James, Jane; Jones, Jeff

2013-01-01

The governing bodies of publicly funded schools in England are currently facing a number of substantive challenges of various kinds. Many of the challenges are long-standing, while others relate to the current context for governing wrought by recent education policy developments initiated by central government. A number of the challenges are…

5. VIEW OF THE EASTERN BRIDGE ELEVATION, SHOWING CENTRAL CUT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW OF THE EASTERN BRIDGE ELEVATION, SHOWING CENTRAL CUT AND MORTARED STONE PIER AND ASSOCIATED STEEL SUPERSTRUCTURE (CENTER), AND CANTILEVERED NORTHERN TRUSS SECTION (RIGHT). FACING NORTHWEST. - Coverts Crossing Bridge, Spanning Mahoning River along Township Route 372 (Covert Road), New Castle, Lawrence County, PA

Local structure-based image decomposition for feature extraction with applications to face recognition.

PubMed

Qian, Jianjun; Yang, Jian; Xu, Yong

2013-09-01

This paper presents a robust but simple image feature extraction method, called image decomposition based on local structure (IDLS). It is assumed that in the local window of an image, the macro-pixel (patch) of the central pixel, and those of its neighbors, are locally linear. IDLS captures the local structural information by describing the relationship between the central macro-pixel and its neighbors. This relationship is represented with the linear representation coefficients determined using ridge regression. One image is actually decomposed into a series of sub-images (also called structure images) according to a local structure feature vector. All the structure images, after being down-sampled for dimensionality reduction, are concatenated into one super-vector. Fisher linear discriminant analysis is then used to provide a low-dimensional, compact, and discriminative representation for each super-vector. The proposed method is applied to face recognition and examined using our real-world face image database, NUST-RWFR, and five popular, publicly available, benchmark face image databases (AR, Extended Yale B, PIE, FERET, and LFW). Experimental results show the performance advantages of IDLS over state-of-the-art algorithms.

Chess masters show a hallmark of face processing with chess.

PubMed

Boggan, Amy L; Bartlett, James C; Krawczyk, Daniel C

2012-02-01

Face processing has several distinctive hallmarks that researchers have attributed either to face-specific mechanisms or to extensive experience distinguishing faces. Here, we examined the face-processing hallmark of selective attention failure--as indexed by the congruency effect in the composite paradigm--in a domain of extreme expertise: chess. Among 27 experts, we found that the congruency effect was equally strong with chessboards and faces. Further, comparing these experts with recreational players and novices, we observed a trade-off: Chess expertise was positively related to the congruency effect with chess yet negatively related to the congruency effect with faces. These and other findings reveal a case of expertise-dependent, facelike processing of objects of expertise and suggest that face and expert-chess recognition share common processes.

[Comparison of surface roughness of nanofilled and microhybrid composite resins after curing and polishing].

PubMed

Jiang, Hong; Lv, Da; Liu, Kailei; Zhang, Weisheng; Yao, Yao; Liao, Chuhong

2014-05-01

To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. P60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen. The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Public health workforce: challenges and policy issues

PubMed Central

Beaglehole, Robert; Dal Poz, Mario R

2003-01-01

This paper reviews the challenges facing the public health workforce in developing countries and the main policy issues that must be addressed in order to strengthen the public health workforce. The public health workforce is diverse and includes all those whose prime responsibility is the provision of core public health activities, irrespective of their organizational base. Although the public health workforce is central to the performance of health systems, very little is known about its composition, training or performance. The key policy question is: Should governments invest more in building and supporting the public health workforce and infrastructure to ensure the more effective functioning of health systems? Other questions concern: the nature of the public health workforce, including its size, composition, skills, training needs, current functions and performance; the appropriate roles of the workforce; and how the workforce can be strengthened to support new approaches to priority health problems. The available evidence to shed light on these policy issues is limited. The World Health Organization is supporting the development of evidence to inform discussion on the best approaches to strengthening public health capacity in developing countries. WHO's priorities are to build an evidence base on the size and structure of the public health workforce, beginning with ongoing data collection activities, and to map the current public health training programmes in developing countries and in Central and Eastern Europe. Other steps will include developing a consensus on the desired functions and activities of the public health workforce and developing a framework and methods for assisting countries to assess and enhance the performance of public health training institutions and of the public health workforce. PMID:12904251

Characteristics of composite images in multiview imaging and integral photography.

PubMed

Lee, Beom-Ryeol; Hwang, Jae-Jeong; Son, Jung-Young

2012-07-20

The compositions of images projected to a viewer's eyes from the various viewing regions of the viewing zone formed in one-dimensional integral photography (IP) and multiview imaging (MV) are identified. These compositions indicate that they are made up of pieces from different view images. Comparisons of the composite images with images composited at various regions of imaging space formed by camera arrays for multiview image acquisition reveal that the composite images do not involve any scene folding in the central viewing zone for either MV or IP. However, in the IP case, compositions from neighboring viewing regions aligned in the horizontal direction have reversed disparities, but in the viewing regions between the central and side viewing zones, no reversed disparities are expected. However, MV does exhibit them.

Female face preference in 4-month-olds: the importance of hairline.

PubMed

Hillairet de Boisferon, Anne; Uttley, Lesley; Quinn, Paul C; Lee, Kang; Pascalis, Olivier

2014-11-01

At 3-4 months of age, infants respond to gender information in human faces. Specifically, young infants display a visual preference toward female over male faces. In three experiments, using a visual preference task, we investigated the role of hairline information in this bias. In Experiment 1, we presented male and female composite faces with similar hairstyles to 4-month-olds and observed a preference for female faces. In Experiment 2, the faces were presented, but in this instance, without hairline cues, and the preference was eliminated. In Experiment 3, using the same cropping to eliminate hairline cues, but with feminized female faces and masculinized male faces, infants' preference toward female faces was still not in evidence. The findings show that hairline information is important in young infants' preferential orientation toward female faces. Copyright © 2014 Elsevier Inc. All rights reserved.

The Role of Vegetation Response to Elevated CO2 in Modifying Land-Atmosphere Feedback Across the Central United States Agro-Ecosystem

NASA Astrophysics Data System (ADS)

Drewry, D.; Kumar, P.; Sivapalan, M.; Long, S.; Liang, X.

2009-05-01

Recent local-scale observational studies have demonstrated significant modifications to the partitioning of incident energy by two key mid-west agricultural species, soy and corn, as ambient atmospheric CO2 concentrations are experimentally augmented to projected future levels. The uptake of CO2 by soy, which utilizes the C3 photosynthetic pathway, has likewise been observed to significantly increase under elevated growth CO2 concentrations. Changes to the sensible and latent heat exchanges between the land surface and the atmospheric boundary layer (ABL) across large portions of the mid-western US has the potential to affect ABL growth and composition, and consequently feed-back to the near-surface environment (air temperature and vapor content) experienced by the vegetation. Here we present a simulation analysis that examines the changes in land-atmosphere feedbacks associated with projected increases in ambient CO2 concentrations over extended soy/corn agricultural areas characteristic of the US mid-west. The model canopies are partitioned into several layers, allowing for resolution of the shortwave and longwave radiation regimes that drive photosynthesis, stomatal conductance and leaf energy balance in each layer, along with the canopy microclimate. The canopy component of the model is coupled to a multi-layer soil-root model that computes soil moisture and heat transport and root water uptake. Model skill in capturing the sub-diurnal variability in canopy-atmosphere exchange is evaluated through multi-year records of canopy-top eddy covariance CO2, water vapor and heat fluxes collected at the Bondville (Illinois) FluxNet site. An evaluation of the ability of the model to simulate observed changes in energy balance components (canopy temperature, net radiation and soil heat flux) under elevated CO2 concentrations projected for 2050 (550 ppm) is made using observations collected at the SoyFACE Free Air Carbon Enrichment (FACE) experimental facilities located in central Illinois, by incorporating observed acclimations in leaf biochemsitry and canopy structure. The simulation control volume is then extended by coupling the canopy models to a simple model of daytime mixed-layer (ML) growth and composition, ie. air temperature and vapor content. Through this coupled canopy-ABL model we quantify the impact of elevated CO2 and vegetation acclimation on ML growth, temperature and vapor content and the consequent feedbacks to the land surface by way of the near-surface environment experienced by the vegetation. Particular focus is placed on the role of short-term drought, and possible changes in land cover composition between soy, a C3 crop, and corn, a more water-use efficient C4 crop, on modulating the strength of these CO2-induced feedbacks.

Central America: A Regional Study.

ERIC Educational Resources Information Center

Mowry, George; Lacy, Ann

This lesson is a series of activities and multi-media presentations designed to enable students to understand the historic and geographic roots of some of the problems that Central American nations have faced. Geography, history, writing, and storytelling are used as ways of understanding a multicultural world. Creative thinking and participation…

Central California Action Associates, Inc.

ERIC Educational Resources Information Center

Sortor, Maia, Comp.

The overall goal of the Central California Action Associates Inc. (CCAA) program is to provide basic education and pre-vocational training so that migrant and seasonal adult farm workers will be able to upgrade their economic and social lives. Without increased educational attainment, the San Joaquin Valley farm workers face a grim future because…

Prevalence of Central Obesity among Adults with Normal BMI and Its Association with Metabolic Diseases in Northeast China.

PubMed

Zhang, Peng; Wang, Rui; Gao, Chunshi; Jiang, Lingling; Lv, Xin; Song, Yuanyuan; Li, Bo

2016-01-01

The present study aimed to investigate the prevalence of central obesity among adults with normal BMI and its association with metabolic diseases in Jilin Province, China. A population-based cross-sectional study was conducted in 2012 in Jilin Province of China. Information was collected by face to face interview. Descriptive data analysis and 95% confidence intervals (CI) of prevalence/frequency were conducted. Log-binomial regression analyses were used to find the independent factors associated with central obesity and to explore the adjusted association between central obesity and metabolic diseases among adults with normal BMI. Among the adult residents with normal BMI in Jilin Province, 55.6% of participants with central obesity self-assessed as normal weight and 27.0% thought their body weight were above normal. 12.7% of central obesity people took methods to lose weight, while 85.3% didn't. Female, older people and non-manual worker had higher risk to be central obesity among adults with normal BMI. Hypertension, diabetes and hyperlipidemia were significantly associated with central obesity among adults with normal BMI, the PRs were 1.337 (1.224-1.461), 1.323 (1.193-1.456) and 1.261 (1.152-1.381) separately when adjusted for gender, age and BMI. Hypertension, diabetes and hyperlipidemia were significantly associated with central obesity among adults with normal BMI in Jilin Province, China. The low rates of awareness and control of central obesity among adults with normal BMI should be improved by government and health department.

On Farmers’ Ground: Wisconsin Dairy Farm Nutrient Management Survey Questionnaire

USDA-ARS?s Scientific Manuscript database

This questionnaire was used during quarterly, face-to-face interviews with the fifty-four Wisconsin dairy farmers who participated in the ‘On Farmers’ Ground’ nutrient management research project. It was designed to systematically and consistently compile information on herd size and composition, l...

Cold-front driven storm erosion and overwash in the central part of the Isles Dernieres, a Louisiana barrier-island arc

USGS Publications Warehouse

Dingler, J.R.; Reiss, T.E.

1990-01-01

Tropical and extratropical storms produce significant erosion on the barrier islands of Louisiana. Over the past 100 years, such storms have produced at least 2 km of northward beach-face retreat and the loss of 63% of the surface area of the Isles Dernieres, a low-lying barrier-island arc along the central Louisiana coast. Elevations on the islands within the arc are typically less than 2 m above mean sea level. The islands typically have a washover-flat topography with occasional, poorly developed, dune-terrace topography consisting of low-lying and broken dunes. The central part of the arc consists of salt-marsh deposits overlain by washover sands along the Gulf of Mexico shoreline. Sand thicknesses range from zero behind the beach, to less than 2 m under the berm crest, and back to zero in the first nearshore trough. The sand veneer is sufficiently thin that storms can strip all the sand from the beach face, exposing the underlying marsh deposits. The geomorphic changes produced by cold fronts, a type of extratropical storm that commonly affect the Isles Dernieres between late fall and early spring are described. Between August 1986 and September 1987, repeated surveys along eleven shore-normal transects that covered 400 m of shoreline revealed the timing and extent of cold-front-produced beach change along a typical section of the central Isles Dernieres. During the study period, the beach face retreated approximately 20 m during the cold-front season but did not rebuild during the subsequent summer. Because the volume of sand deposited on the backshore (5600 m3) was less than the volume of material lost from the beach face (19,200 m3), approximately 13,600 m3 of material disappeared. Assuming that underlying marsh deposits decrease in volume in direct proportion to the amount of beach-face retreat, an estimate of the mud loss during the study period is 14,000 m3. Thus, the decrease in volume along the profiles can be accounted for without removing any sand from the area, suggesting that a major effect of cold fronts is first to strip the sand from the beach face and then to erode the underlying marsh deposits. After being eroded, the mud is lost from the islands because currents transport it away from the islands. ?? 1990.

Disposable surgical face masks for preventing surgical wound infection in clean surgery.

PubMed

Lipp, Allyson; Edwards, Peggy

2014-02-17

Surgical face masks were originally developed to contain and filter droplets containing microorganisms expelled from the mouth and nasopharynx of healthcare workers during surgery, thereby providing protection for the patient. However, there are several ways in which surgical face masks could potentially contribute to contamination of the surgical wound, e.g. by incorrect wear or by leaking air from the side of the mask due to poor string tension. To determine whether disposable surgical face masks worn by the surgical team during clean surgery prevent postoperative surgical wound infection. We searched The Cochrane Wounds Group Specialised Register on 23 October 2013; The Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library); Ovid MEDLINE; Ovid MEDLINE (In-Process & Other Non-Indexed Citations); Ovid EMBASE; and EBSCO CINAHL. Randomised controlled trials (RCTs) and quasi-randomised controlled trials comparing the use of disposable surgical masks with the use of no mask. Two review authors extracted data independently. Three trials were included, involving a total of 2113 participants. There was no statistically significant difference in infection rates between the masked and unmasked group in any of the trials. From the limited results it is unclear whether the wearing of surgical face masks by members of the surgical team has any impact on surgical wound infection rates for patients undergoing clean surgery.

The Physical Basis for the Head-to-Tail Rule that Excludes Most Fullerene Cages from Self-Assembly☆

PubMed Central

Schein, Stan; Sands-Kidner, Michelle; Friedrich, Tara

2008-01-01

Abstract In the companion article, we proposed that fullerene cages with head-to-tail dihedral angle discrepancies do not self-assemble. Here we show why. If an edge abuts a pentagon at one end and a hexagon at the other, the dihedral angle about the edge increases, producing a dihedral angle discrepancy (DAD) vector. The DADs about all five/six edges of a central pentagonal/hexagonal face are determined by the identities—pentagon or hexagon—of its five/six surrounding faces. Each “Ring”—central face plus specific surrounding faces—may have zero, two, or four edges with DAD. In most Rings, the nonplanarity induced by DADs is shared among surrounding faces. However, in a Ring that has DADs arranged head of one to tail of another, the nonplanarity cannot be shared, so some surrounding faces would be especially nonplanar. Because the head-to-tail exclusion rule is an implicit geometric constraint, the rule may operate either by imposing a kinetic barrier that prevents assembly of certain Rings or by imposing an energy cost that makes those Rings unlikely to last in an equilibrium circumstance. Since Rings with head-to-tail DADs would be unlikely to self-assemble or last, fullerene cages with those Rings would be unlikely to self-assemble. PMID:17921208

Transplanting a Western-Style Journalism Education to the Central Asian Republics of the Former Soviet Union: Experiences and Challenges at the American University of Central Asia in Kyrgyzstan

ERIC Educational Resources Information Center

Skochilo, Elena; Toralieva, Gulnura; Freedman, Eric; Shafer, Richard

2013-01-01

Western standards of journalism education, as well as western professional journalistic practices, have had difficulty taking root in the five independent countries of formerly Soviet Central Asia. This essay examines the experience of one university's Department of Journalism and Mass Communication since 1997 and the challenges it faces,…

Emotional Cues during Simultaneous Face and Voice Processing: Electrophysiological Insights

PubMed Central

Liu, Taosheng; Pinheiro, Ana; Zhao, Zhongxin; Nestor, Paul G.; McCarley, Robert W.; Niznikiewicz, Margaret A.

2012-01-01

Both facial expression and tone of voice represent key signals of emotional communication but their brain processing correlates remain unclear. Accordingly, we constructed a novel implicit emotion recognition task consisting of simultaneously presented human faces and voices with neutral, happy, and angry valence, within the context of recognizing monkey faces and voices task. To investigate the temporal unfolding of the processing of affective information from human face-voice pairings, we recorded event-related potentials (ERPs) to these audiovisual test stimuli in 18 normal healthy subjects; N100, P200, N250, P300 components were observed at electrodes in the frontal-central region, while P100, N170, P270 were observed at electrodes in the parietal-occipital region. Results indicated a significant audiovisual stimulus effect on the amplitudes and latencies of components in frontal-central (P200, P300, and N250) but not the parietal occipital region (P100, N170 and P270). Specifically, P200 and P300 amplitudes were more positive for emotional relative to neutral audiovisual stimuli, irrespective of valence, whereas N250 amplitude was more negative for neutral relative to emotional stimuli. No differentiation was observed between angry and happy conditions. The results suggest that the general effect of emotion on audiovisual processing can emerge as early as 200 msec (P200 peak latency) post stimulus onset, in spite of implicit affective processing task demands, and that such effect is mainly distributed in the frontal-central region. PMID:22383987

The Mediation of Literacy Education and Correspondence Composition Courses at UNC-Chapel Hill, 1912-1924

ERIC Educational Resources Information Center

Wooten, Courtney Adams

2013-01-01

Tracing the correspondence composition courses taught at the University of North Carolina-Chapel Hill from 1912 to 1924, this essay argues that examining distance education in the nineteenth and twentieth centuries can reveal possible problems or solutions to issues composition instructors face in twenty-first-century debates about moving…

Design of embedded intelligent monitoring system based on face recognition

NASA Astrophysics Data System (ADS)

Liang, Weidong; Ding, Yan; Zhao, Liangjin; Li, Jia; Hu, Xuemei

2017-01-01

In this paper, a new embedded intelligent monitoring system based on face recognition is proposed. The system uses Pi Raspberry as the central processor. A sensors group has been designed with Zigbee module in order to assist the system to work better and the two alarm modes have been proposed using the Internet and 3G modem. The experimental results show that the system can work under various light intensities to recognize human face and send alarm information in real time.

Frontonasal dysplasia: oral features, restorative and orthodontic dental treatment in a child.

PubMed

Valério, R A; Scatena, C; Santos, F R R; Romano, F L; Queiroz, A M; Paula-Silva, F W G

2017-04-01

Frontonasal dysplasia is a complex rare malformation, characterised by abnormalities involving the central portion of the face, especially the eyes, nose and forehead. It can manifest independently or associated with other abnormalities as part of some syndromes. The purpose of this case report was to describe a 5-year-old patient, diagnosed with frontonasal dysplasia. Among the abnormalities characterised with this disorder were ocular hypertelorism, broad nose tip with median notch, median facial cleft, bifid anterior skull, low set hairline, Poland's syndactyly and ankyloglossia. Consisted of behavioural management, oral hygiene instruction, prophylaxis, topical fluoride application, extraction of primary teeth, composite resin restorations and sealants in pits and fissures. Preformed metal crowns were also applied to the right and left primary maxillary second molars. Currently, the patient is 11 years-old in the permanent dentition and therefore was referred for corrective orthodontic and periodontal treatments due to the persistence of gingival retraction of the permanent mandibular right central incisor. The treatment in this case was directed to the promotion of oral health and orthodontic corrections, which are of fundamental importance due to medical, physical and social limitations of children affected by this syndrome, hindering healing and rehabilitative treatment. Paediatric dentists should be included in multidisciplinary teams providing care to patients with special needs, improving their quality of life.

Essential oil composition of five collections of Achillea biebersteinii from central Turkey and their antifungal and insecticidal activity

USDA-ARS?s Scientific Manuscript database

The composition of the essential oils hydrodistilled from the aerial parts of five Achillea biebersteinii Afan samples, collected in central Turkey from Konya, Isparta and Ankara, were analyzed both by gas chromatography (GC-FID) and gas chromatography-mass spectrometry (GC-MS). Eighty-four componen...

Structural Analysis and Optimization of a Composite Fan Blade for Future Aircraft Engine

NASA Astrophysics Data System (ADS)

Coroneos, Rula M.; Gorla, Rama Subba Reddy

2012-09-01

This paper addresses the structural analysis and optimization of a composite sandwich ply lay-up of a NASA baseline solid metallic fan blade comparable to a future Boeing 737 MAX aircraft engine. Sandwich construction with a polymer matrix composite face sheet and honeycomb aluminum core replaces the original baseline solid metallic fan model made of Titanium. The focus of this work is to design the sandwich composite blade with the optimum number of plies for the face sheet that will withstand the combined pressure and centrifugal loads while the constraints are satisfied and the baseline aerodynamic and geometric parameters are maintained. To satisfy the requirements a sandwich construction for the blade is proposed with composite face sheets and a weak core made of honeycomb aluminum material. For aerodynamic considerations, the thickness of the core is optimized where as the overall blade thickness is held fixed in order not to alter the original airfoil geometry. Weight reduction is taken as the objective function by varying the core thickness of the blade within specified upper and lower bounds. Constraints are imposed on radial displacement limitations and ply failure strength. From the optimum design, the minimum number of plies, which will not fail, is back-calculated. The ply lay-up of the blade is adjusted from the calculated number of plies and final structural analysis is performed. Analyses were carried out by utilizing the OpenMDAO Framework, developed at NASA Glenn Research Center combining optimization with structural assessment.

Effectiveness of psychological treatments for depressive disorders in primary care: systematic review and meta-analysis.

PubMed

Linde, Klaus; Sigterman, Kirsten; Kriston, Levente; Rücker, Gerta; Jamil, Susanne; Meissner, Karin; Schneider, Antonius

2015-01-01

We performed a systematic review of the currently available evidence on whether psychological treatments are effective for treating depressed primary care patients in comparison with usual care or placebo, taking the type of therapy and its delivery mode into account. Randomized controlled trials comparing a psychological treatment with a usual care or a placebo control in adult, depressed, primary care patients were identified by searches in MEDLINE, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), and PsycINFO up to December 2013. At least 2 reviewers extracted information from included studies and assessed the risk of bias. Random effects meta-analyses were performed using posttreatment depression scores as outcome. A total of 30 studies with 5,159 patients met the inclusion criteria. Compared with control, the effect (standardized mean difference) at completion of treatment was -0.30 (95% CI, -0.48 to -0.13) for face-to-face cognitive behavioral therapy (CBT), -0.14 (-0.40 to 0.12) for face-to-face problem-solving therapy, -0.24 (-0.47 to -0.02) for face-to-face interpersonal psychotherapy, -0.28 (-0.44 to -0.12) for other face-to-face psychological interventions, -0.43 (-0.62 to -0.24) for remote therapist-led CBT, -0.56 (-1.57 to 0.45) for remote therapist-led problem-solving therapy, -0.40 (-0.69 to -0.11) for guided self-help CBT, and -0.27 (-0.44 to -0.10) for no or minimal contact CBT. There is evidence that psychological treatments are effective in depressed primary care patients. For CBT approaches, substantial evidence suggests that interventions that are less resource intensive might have effects similar to more intense treatments. © 2015 Annals of Family Medicine, Inc.

Production Principles and Technological Development of Novel Woven Spacer Preforms and Integrated Stiffener Structures

NASA Astrophysics Data System (ADS)

Torun, Ahmet R.; Mountasir, Adil; Hoffmann, Gerald; Cherif, Chokri

2013-06-01

3D textile preforms offer a high potential to increase mechanical properties of composites and/or decrease manufacturing costs. Within the scope of this study, production principles were developed for complex spacer preforms and integrated stiffeners. These principles were applied through technological further development of the well-known face-to-face and terry weaving techniques. Various woven preforms were produced with Glass fibre/Polypropylene (GF/PP) Commingled yarns, however, the technology is suitable for any type of reinforcement yarns. U-shaped woven spacer preform was consolidated into a sandwich composite component for lightweight applications.

Cibecue watershed projects: Then, now, and in the future

Treesearch

Jonathan W. Long

2000-01-01

The White Mountain Apache Tribe has undertaken a watershed analysis and various demonstration projects in the Cibecue watershed in east-central Arizona. The results support an adaptive management strategy to promote ecological health, enhance economic opportunities, and protect cultural values. Some of the problems faced by today’s program are similar to those faced by...

The Hybridization of Distance Learning in Brazil: An Approach Imposed by Culture.

ERIC Educational Resources Information Center

Litto, Fredric Michael

2002-01-01

Higher education institutions in Brazil are seriously behind in the use of distance education largely because of the highly centralized control by the Ministry of Education. Hybridization, or the combination of face-to-face and distance learning techniques, is not motivated by pedagogical choice, but rather the only legally permitted approach in…

The mighty oak faces challenges in the Pacific West

Treesearch

Gail Wells

2010-01-01

In popular imagination, the oak tree stands for strength, endurance, and longevity. But in the coastal lowlands and central valleys of British Columbia, Washington, Oregon, and California, oaks face a battery of natural and human-induced threats. Sudden oak death, caused by a virulent pathogen identified in 2000, has killed millions of tanoaks, California black oaks,...

When Some Is Actually All: Scalar Inferences in Face-Threatening Contexts

ERIC Educational Resources Information Center

Bonnefon, Jean-Francois; Feeney, Aidan; Villejoubert, Gaelle

2009-01-01

Accounts of the scalar inference from "some X-ed" to "not all X-ed" are central to the debate between contemporary theories of conversational pragmatics. An important contribution to this debate is to identify contexts that decrease the endorsement rate of the inference. We suggest that the inference is endorsed less often in face-threatening…

23. The Stroud Building beard the 'Temme Springs' advertisement. Westfacing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. The Stroud Building beard the 'Temme Springs' advertisement. West-facing windows of the entire block are protected from the afternoon sun by awnings. The north-facing windows of the second-story restaurant were later blocked by an adjacent two-story building. Circa 1914. Credit PPL. - Stroud Building, 31-33 North Central Avenue, Phoenix, Maricopa County, AZ

Global precedence effects account for individual differences in both face and object recognition performance.

PubMed

Gerlach, Christian; Starrfelt, Randi

2018-03-20

There has been an increase in studies adopting an individual difference approach to examine visual cognition and in particular in studies trying to relate face recognition performance with measures of holistic processing (the face composite effect and the part-whole effect). In the present study we examine whether global precedence effects, measured by means of non-face stimuli in Navon's paradigm, can also account for individual differences in face recognition and, if so, whether the effect is of similar magnitude for faces and objects. We find evidence that global precedence effects facilitate both face and object recognition, and to a similar extent. Our results suggest that both face and object recognition are characterized by a coarse-to-fine temporal dynamic, where global shape information is derived prior to local shape information, and that the efficiency of face and object recognition is related to the magnitude of the global precedence effect.

An integrtated approach to the use of Landsat TM data for gold exploration in west central Nevada

NASA Technical Reports Server (NTRS)

Mouat, D. A.; Myers, J. S.; Miller, N. L.

1987-01-01

This paper represents an integration of several Landsat TM image processing techniques with other data to discriminate the lithologies and associated areas of hydrothermal alteration in the vicinity of the Paradise Peak gold mine in west central Nevada. A microprocessor-based image processing system and an IDIMS system were used to analyze data from a 512 X 512 window of a Landsat-5 TM scene collected on June 30, 1984. Image processing techniques included simple band composites, band ratio composites, principal components composites, and baseline-based composites. These techniques were chosen based on their ability to discriminate the spectral characteristics of the products of hydrothermal alteration as well as of the associated regional lithologies. The simple band composite, ratio composite, two principal components composites, and the baseline-based composites separately can define the principal areas of alteration. Combined, they provide a very powerful exploration tool.

Reconstructing 3D Face Model with Associated Expression Deformation from a Single Face Image via Constructing a Low-Dimensional Expression Deformation Manifold.

PubMed

Wang, Shu-Fan; Lai, Shang-Hong

2011-10-01

Facial expression modeling is central to facial expression recognition and expression synthesis for facial animation. In this work, we propose a manifold-based 3D face reconstruction approach to estimating the 3D face model and the associated expression deformation from a single face image. With the proposed robust weighted feature map (RWF), we can obtain the dense correspondences between 3D face models and build a nonlinear 3D expression manifold from a large set of 3D facial expression models. Then a Gaussian mixture model in this manifold is learned to represent the distribution of expression deformation. By combining the merits of morphable neutral face model and the low-dimensional expression manifold, a novel algorithm is developed to reconstruct the 3D face geometry as well as the facial deformation from a single face image in an energy minimization framework. Experimental results on simulated and real images are shown to validate the effectiveness and accuracy of the proposed algorithm.

Toward a mineral physics reference model for the Moon's core.

PubMed

Antonangeli, Daniele; Morard, Guillaume; Schmerr, Nicholas C; Komabayashi, Tetsuya; Krisch, Michael; Fiquet, Guillaume; Fei, Yingwei

2015-03-31

The physical properties of iron (Fe) at high pressure and high temperature are crucial for understanding the chemical composition, evolution, and dynamics of planetary interiors. Indeed, the inner structures of the telluric planets all share a similar layered nature: a central metallic core composed mostly of iron, surrounded by a silicate mantle, and a thin, chemically differentiated crust. To date, most studies of iron have focused on the hexagonal closed packed (hcp, or ε) phase, as ε-Fe is likely stable across the pressure and temperature conditions of Earth's core. However, at the more moderate pressures characteristic of the cores of smaller planetary bodies, such as the Moon, Mercury, or Mars, iron takes on a face-centered cubic (fcc, or γ) structure. Here we present compressional and shear wave sound velocity and density measurements of γ-Fe at high pressures and high temperatures, which are needed to develop accurate seismic models of planetary interiors. Our results indicate that the seismic velocities proposed for the Moon's inner core by a recent reanalysis of Apollo seismic data are well below those of γ-Fe. Our dataset thus provides strong constraints to seismic models of the lunar core and cores of small telluric planets. This allows us to propose a direct compositional and velocity model for the Moon's core.

Parallel, multi-stage processing of colors, faces and shapes in macaque inferior temporal cortex

PubMed Central

Lafer-Sousa, Rosa; Conway, Bevil R.

2014-01-01

Visual-object processing culminates in inferior temporal (IT) cortex. To assess the organization of IT, we measured fMRI responses in alert monkey to achromatic images (faces, fruit, bodies, places) and colored gratings. IT contained multiple color-biased regions, which were typically ventral to face patches and, remarkably, yoked to them, spaced regularly at four locations predicted by known anatomy. Color and face selectivity increased for more anterior regions, indicative of a broad hierarchical arrangement. Responses to non-face shapes were found across IT, but were stronger outside color-biased regions and face patches, consistent with multiple parallel streams. IT also contained multiple coarse eccentricity maps: face patches overlapped central representations; color-biased regions spanned mid-peripheral representations; and place-biased regions overlapped peripheral representations. These results suggest that IT comprises parallel, multi-stage processing networks subject to one organizing principle. PMID:24141314

Fertilizer use and wheat yield in Central and Eastern European countries from 1986 to 2005 and its implication for developing sustainable fertilizer management practices

USDA-ARS?s Scientific Manuscript database

Central-Eastern European countries (CEE) face economic and political challenges that have implications for agricultural production. The challenge for agriculturalists is to increase agricultural production after years of misguided policies and resource constraints (primarily nutrients). We tested th...

Renewal of Central Higher Education: Issues and Challenges.

ERIC Educational Resources Information Center

Cerych, Ladislav

1991-01-01

The heritage of the past 50 years is the greatest challenge facing higher education in central Europe. Issues to be addressed include the traditional separation of teaching and research, low enrollment and labor market needs, diversification, access, the role of the government, and the economic context and impact of higher education. (MSE)

Impact of parking supply and demand management on central business district traffic congestion, transit performance measures and sustainable land use [summary].

DOT National Transportation Integrated Search

2012-01-01

Parking is one of the thorniest problems facing local officials who wish to maintain the vitality of central business districts (CBD). Viewed in isolation, the solution often is seen as more parking, at least, and more free parking, if possible. But ...

Holistic processing of static and moving faces.

PubMed

Zhao, Mintao; Bülthoff, Isabelle

2017-07-01

Humans' face ability develops and matures with extensive experience in perceiving, recognizing, and interacting with faces that move most of the time. However, how facial movements affect 1 core aspect of face ability-holistic face processing-remains unclear. Here we investigated the influence of rigid facial motion on holistic and part-based face processing by manipulating the presence of facial motion during study and at test in a composite face task. The results showed that rigidly moving faces were processed as holistically as static faces (Experiment 1). Holistic processing of moving faces persisted whether facial motion was presented during study, at test, or both (Experiment 2). Moreover, when faces were inverted to eliminate the contributions of both an upright face template and observers' expertise with upright faces, rigid facial motion facilitated holistic face processing (Experiment 3). Thus, holistic processing represents a general principle of face perception that applies to both static and dynamic faces, rather than being limited to static faces. These results support an emerging view that both perceiver-based and face-based factors contribute to holistic face processing, and they offer new insights on what underlies holistic face processing, how information supporting holistic face processing interacts with each other, and why facial motion may affect face recognition and holistic face processing differently. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

A Successful Collaborative: Scientists and Middle School Teachers!

NASA Astrophysics Data System (ADS)

Walker, S. H.; Brown, S. A.; Culipher-Ross, S.; Spranger, M.; Dindo, J.; Tinnin, R.; Kastler, J.; Brook, R. D.; Bishop, T.; Tuddenham, P.

2004-12-01

This NSF/ONR-NOPP/NOAA-Sea Grant funded Center for Ocean Sciences Education Excellence:Central Gulf Of Mexico (COSEE:CGOM) presentation will review "best practices" and lessons learned in a successful ocean sciences and science education based graduate course, offered in a face-to-face and online format. Implementation strategies which will be discussed include: participant recruitment, the "face to face" and online graduate course infrastructure, as well as teachers-to-sea, website development, and cognitive and affective formation and summative evaluations. This COSEE:CGOM effort is helping research scientists meet the "broader impact" requirement being mandated by many funding agencies. Various URLs will also be provided to attendees.

Node property of weighted networks considering connectability to nodes within two degrees of separation.

PubMed

Amano, Sun-Ichi; Ogawa, Ken-Ichiro; Miyake, Yoshihiro

2018-05-31

Weighted networks have been extensively studied because they can represent various phenomena in which the diversity of edges is essential. To investigate the properties of weighted networks, various centrality measures have been proposed, such as strength, weighted clustering coefficients, and weighted betweenness centrality. In such measures, only direct connections or entire network connectivity from arbitrary nodes have been used to calculate the connectivity of each node. However, in weighted networks composed of autonomous elements such as humans, middle ranges from each node are also considered to be meaningful for characterizing each node's connectability. In this study, we define a new node property in weighted networks to consider connectability to nodes within a range of two degrees of separation, then apply this new centrality to face-to-face human communication networks in corporate organizations. Our results show that the proposed centrality distinguishes inherent communities corresponding to the job types in each organization with a high degree of accuracy. This indicates the possibility that connectability to nodes within two degrees of separation reveals potential trends of weighted networks that are not apparent from conventional measures.

Beauty and cuteness in peripheral vision

PubMed Central

Kuraguchi, Kana; Ashida, Hiroshi

2015-01-01

Guo et al. (2011) showed that attractiveness was detectable in peripheral vision. Since there are different types of attractiveness (Rhodes, 2006), we investigated how beauty and cuteness are detected in peripheral vision with a brief presentation. Participants (n = 45) observed two Japanese female faces for 100 ms, then were asked to respond which face was more beautiful (or cuter). The results indicated that both beauty and cuteness were detectable in peripheral vision, but not in the same manner. Discrimination rates for judging beauty were invariant in peripheral and central vision, while discrimination rates for judging cuteness declined in peripheral vision as compared with central vision. This was not explained by lower resolution in peripheral vision. In addition, for male participants, it was more difficult to judge cuteness than beauty in peripheral vision, thus suggesting that gender differences can have a certain effect when judging cuteness. Therefore, central vision might be suitable for judging cuteness while judging beauty might not be affected by either central or peripheral vision. This might be related with the functional difference between beauty and cuteness. PMID:25999883

Positioning Bascularized Composite Allotransplantation with the Spectrum of Transplantion

DTIC Science & Technology

2015-10-01

therapeutic option for patients in need of advanced tissue reconstruction. II. Keywords Biorepository, vascularized composite allograft , nonhuman primates... tissues (e.g. hand, face) into a useful therapeutic option for individuals in need of advance tissue reconstruction and replacement. The proposal...death but increased the rate of soft tissue injury. Vascularized composite allotransplantation (VCA) has recently emerged as a promising strategy for

Performance of composite boards from long strand oil palm trunk bonded by isocyanate and urea formaldehyde adhesives

NASA Astrophysics Data System (ADS)

Hermanto, Indra; Massijaya, M. Y.

2018-03-01

In this research, the obtained long strand were produced from the outer part of oil palm trunk and then hot-prepressed. The three-ply composite boards were made from hot-prepressed long strand and use bonded by isocyanate and urea formaldehyde adhesives with a glue spread variation of 150 g/m2, 225 g/m2, and 300 g/m2. The board target density was 0.65 g/cm3, face and back layers orientation is the same and the core layer was perpendicular to the face and back layers. The research results showed that : (1) composite boards bonded by isocyanate performed better physical and mechanical properties compared to those of bonded by urea formaldehyde, (2) utilization of higher glue spread level would improve the physical and mechanical properties of the composite board. (3) composite boards bonded by isocyanate and urea formaldehyde adhesives at glue spread of 225 g/m2, 300 g/m2, respectively were enough to fulfill the JIS A 5908 (2003) standard.

Fabrication of metal matrix composites by powder metallurgy: A review

NASA Astrophysics Data System (ADS)

Manohar, Guttikonda; Dey, Abhijit; Pandey, K. M.; Maity, S. R.

2018-04-01

Now a day's metal matrix components are used in may industries and it finds the applications in many fields so, to make it as better performable materials. So, the need to increase the mechanical properties of the composites is there. As seen from previous studies major problem faced by the MMC's are wetting, interface bonding between reinforcement and matrix material while they are prepared by conventional methods like stir casting, squeeze casting and other techniques which uses liquid molten metals. So many researchers adopt PM to eliminate these defects and to increase the mechanical properties of the composites. Powder metallurgy is one of the better ways to prepare composites and Nano composites. And the major problem faced by the conventional methods are uniform distribution of the reinforcement particles in the matrix alloy, many researchers tried to homogeneously dispersion of reinforcements in matrix but they find it difficult through conventional methods, among all they find ultrasonic dispersion is efficient. This review article is mainly concentrated on importance of powder metallurgy in homogeneous distribution of reinforcement in matrix by ball milling or mechanical milling and how powder metallurgy improves the mechanical properties of the composites.

Influence of Markets on the Composition of Central Appalachian Forests

Treesearch

William G. Luppold; Gary W. Miller; Gary W. Miller

2005-01-01

Timber harvesting has been disturbing Central Appalachian hardwood forests since colonial times, but its most profound influence on forest composition has occurred during the last 130 years. Between the end of the Civil War and the Great Depression, the lumber industry went from state to state harvesting relatively large portions of the timber resource. This...

Stand hazard rating for central Idaho forests

Treesearch

Robert Steele; Ralph E. Williams; Julie C. Weatherby; Elizabeth D. Reinhardt; James T. Hoffman; R. W. Thier

1996-01-01

Growing concern over sustainability of central ldaho forests has created a need to assess the health of forest stands on a relative basis. A stand hazard rating was developed as a composite of 11 individual ratings to compare the health hazards of different stands. The composite rating includes Douglas-fir beetle, mountain pine beetle, western pine beetle, spruce...

Chemical composition of acid precipitation in central Texas

Treesearch

Hal B. H., Jr. Cooper; Jerry M. Demo

1976-01-01

Studies were undertaken to determine factors affecting composition of acidic precipitation formation in the Austin area of Central Texas. The study was initiated to determine background levels of acid and alkalinity producing constituents in an area with elevated natural dust levels from nearby limestone rock formations. Results showed normal rainfall pH values of 6.5...

An Analysis of Density and Degree-Centrality According to the Social Networking Structure Formed in an Online Learning Environment

ERIC Educational Resources Information Center

Ergün, Esin; Usluel, Yasemin Koçak

2016-01-01

In this study, we assessed the communication structure in an educational online learning environment using social network analysis (SNA). The communication structure was examined with respect to time, and instructor's participation. The course was implemented using ELGG, a network learning environment, blended with face-to-face sessions over a…

Developmental Changes in Infants' Processing of Happy and Angry Facial Expressions: A Neurobehavioral Study

ERIC Educational Resources Information Center

Grossmann, Tobias; Striano, Tricia; Friederici, Angela D.

2007-01-01

Event-related brain potentials were measured in 7- and 12-month-old infants to examine the development of processing happy and angry facial expressions. In 7-month-olds a larger negativity to happy faces was observed at frontal, central, temporal and parietal sites (Experiment 1), whereas 12-month-olds showed a larger negativity to angry faces at…

Finding Needles in Haystacks: Identity Mismatch Frequency and Facial Identity Verification

ERIC Educational Resources Information Center

Bindemann, Markus; Avetisyan, Meri; Blackwell, Kristy-Ann

2010-01-01

Accurate person identification is central to all security, police, and judicial systems. A commonplace method to achieve this is to compare a photo-ID and the face of its purported owner. The critical aspect of this task is to spot cases in which these two instances of a face do not match. Studies of person identification show that these instances…

Development of a 3D log sawing optimization system for small sawmills in central Appalachia, US

Treesearch

Wenshu Lin; Jingxin Wang; Edward Thomas

2011-01-01

A 3D log sawing optimization system was developed to perform log generation, opening face determination, sawing simulation, and lumber grading using 3D modeling techniques. Heuristic and dynamic programming algorithms were used to determine opening face and grade sawing optimization. Positions and shapes of internal log defects were predicted using a model developed by...

The Oxytocin Receptor Gene ( OXTR) and Face Recognition.

PubMed

Verhallen, Roeland J; Bosten, Jenny M; Goodbourn, Patrick T; Lawrance-Owen, Adam J; Bargary, Gary; Mollon, J D

2017-01-01

A recent study has linked individual differences in face recognition to rs237887, a single-nucleotide polymorphism (SNP) of the oxytocin receptor gene ( OXTR; Skuse et al., 2014). In that study, participants were assessed using the Warrington Recognition Memory Test for Faces, but performance on Warrington's test has been shown not to rely purely on face recognition processes. We administered the widely used Cambridge Face Memory Test-a purer test of face recognition-to 370 participants. Performance was not significantly associated with rs237887, with 16 other SNPs of OXTR that we genotyped, or with a further 75 imputed SNPs. We also administered three other tests of face processing (the Mooney Face Test, the Glasgow Face Matching Test, and the Composite Face Test), but performance was never significantly associated with rs237887 or with any of the other genotyped or imputed SNPs, after corrections for multiple testing. In addition, we found no associations between OXTR and Autism-Spectrum Quotient scores.

Quasi-Static Compression and Low-Velocity Impact Behavior of Tri-Axial Bio-Composite Structural Panels Using a Spherical Head

PubMed Central

Li, Jinghao; Hunt, John F; Gong, Shaoqin; Cai, Zhiyong

2017-01-01

This paper presents experimental results of both quasi-static compression and low-velocity impact behavior for tri-axial bio-composite structural panels using a spherical load head. Panels were made having different core and face configurations. The results showed that panels made having either carbon fiber fabric composite faces or a foam-filled core had significantly improved impact and compressive performance over panels without either. Different localized impact responses were observed based on the location of the compression or impact relative to the tri-axial structural core; the core with a smaller structural element had better impact performance. Furthermore, during the early contact phase for both quasi-static compression and low-velocity impact tests, the panels with the same configuration had similar load-displacement responses. The experimental results show basic compression data could be used for the future design and optimization of tri-axial bio-composite structural panels for potential impact applications. PMID:28772542

Impact and damage of an armour composite

NASA Astrophysics Data System (ADS)

Resnyansky, A. D.; Parry, S.; Bourne, N. K.; Townsend, D.; James, B.

2017-01-01

The current study assesses the application of the Taylor Test to validate hydrocode modelling of composite materials. 0° in-plane and through-thickness rods were cut from a 25 mm thick composite panel, made from autoclave cured 0°, 90° uni-directional carbon/epoxy prepreg. The rods were fired against a semi-infinite steel anvil and high-speed video imaging was used to capture the difference in rod shape and damage patterns during the experiments. Results of simulation with a rate sensitive, transversely isotropic composite material model implemented in the CTH hydrocode were compared with the present experiments. The model showed good correlation with global deformation of the rods, and was used to qualitatively assess some of the asymmetric deformation features in the material. As the present model implementation did not account for damage at this stage, it did not predict inter-ply delamination normal to the impact face for the in-plane 0° rods and that parallel to the impact face in the through-thickness samples.

Selected properties of MDF and flakeboard overlaid with fiberglass mats

Treesearch

Zhiyong Cai

2006-01-01

Nonwoven fiberglass face laminates have long been applied to consolidated wood- based composites to improve their performance and serviceability. In this study, fiberglass mats with 50 percent resin binder were applied as face laminates to unconsolidated wood fiber or flake mats, then hot-pressed to make overlaid medium density fiberboard and flakeboard. Fiberglass...

A specialized face-processing model inspired by the organization of monkey face patches explains several face-specific phenomena observed in humans.

PubMed

Farzmahdi, Amirhossein; Rajaei, Karim; Ghodrati, Masoud; Ebrahimpour, Reza; Khaligh-Razavi, Seyed-Mahdi

2016-04-26

Converging reports indicate that face images are processed through specialized neural networks in the brain -i.e. face patches in monkeys and the fusiform face area (FFA) in humans. These studies were designed to find out how faces are processed in visual system compared to other objects. Yet, the underlying mechanism of face processing is not completely revealed. Here, we show that a hierarchical computational model, inspired by electrophysiological evidence on face processing in primates, is able to generate representational properties similar to those observed in monkey face patches (posterior, middle and anterior patches). Since the most important goal of sensory neuroscience is linking the neural responses with behavioral outputs, we test whether the proposed model, which is designed to account for neural responses in monkey face patches, is also able to predict well-documented behavioral face phenomena observed in humans. We show that the proposed model satisfies several cognitive face effects such as: composite face effect and the idea of canonical face views. Our model provides insights about the underlying computations that transfer visual information from posterior to anterior face patches.

A specialized face-processing model inspired by the organization of monkey face patches explains several face-specific phenomena observed in humans

PubMed Central

Farzmahdi, Amirhossein; Rajaei, Karim; Ghodrati, Masoud; Ebrahimpour, Reza; Khaligh-Razavi, Seyed-Mahdi

2016-01-01

Converging reports indicate that face images are processed through specialized neural networks in the brain –i.e. face patches in monkeys and the fusiform face area (FFA) in humans. These studies were designed to find out how faces are processed in visual system compared to other objects. Yet, the underlying mechanism of face processing is not completely revealed. Here, we show that a hierarchical computational model, inspired by electrophysiological evidence on face processing in primates, is able to generate representational properties similar to those observed in monkey face patches (posterior, middle and anterior patches). Since the most important goal of sensory neuroscience is linking the neural responses with behavioral outputs, we test whether the proposed model, which is designed to account for neural responses in monkey face patches, is also able to predict well-documented behavioral face phenomena observed in humans. We show that the proposed model satisfies several cognitive face effects such as: composite face effect and the idea of canonical face views. Our model provides insights about the underlying computations that transfer visual information from posterior to anterior face patches. PMID:27113635

Core design for use with precision composite reflectors

NASA Technical Reports Server (NTRS)

Porter, Christopher C. (Inventor); Jacoy, Paul J. (Inventor); Schmitigal, Wesley P. (Inventor)

1992-01-01

A uniformly flexible core, and method for manufacturing the same, is disclosed for use between the face plates of a sandwich structure. The core is made of a plurality of thin corrugated strips, the corrugations being defined by a plurality of peaks and valleys connected to one another by a plurality of diagonal risers. The corrugated strips are orthogonally criss-crossed to form the core. The core is particularly suitable for use with high accuracy spherically curved sandwich structures because undesirable stresses in the curved face plates are minimized due to the uniform flexibility characteristics of the core in both the X and Y directions. The core is self venting because of the open geometry of the corrugations. The core can be made from any suitable composite, metal, or polymer. Thermal expansion problems in sandwich structures may be minimized by making the core from the same composite materials that are selected in the manufacture of the curved face plates because of their low coefficients of thermal expansion. Where the strips are made of a composite material, the core may be constructed by first cutting an already cured corrugated sheet into a plurality of corrugated strips and then secondarily bonding the strips to one another or, alternatively, by lying a plurality of uncured strips orthogonally over one another in a suitable jig and then curing and bonding the entire plurality of strips to one another in a single operation.

Evaluating the Association of Tooth Form of Maxillary Central Incisors with Face Shape Using AutoCAD Software: A Descriptive Study.

PubMed

Mehndiratta, Aditi; Bembalagi, Mahantesh; Patil, Raghunath

2017-12-27

To assess the different forms of maxillary central incisors (MCI) and determine their association with the shape of the face for men and women. A total of 200 subjects (100 women, 100 men) aged between 18 and 30 years with healthy dentition were randomly selected from K.L.E. V.K Institute of Dental Sciences, Belagavi, India. Two standardized photographs (portrait and shape of the MCI) were taken for each subject and opened in AutoCAD 2009 software that was used to prepare technical drawings of face and tooth forms. The dental ratios (extent of line TA: extent of line TB) obtained after the tracings, were classified as tapered (≤0.61), ovoid (>0.61 and <0.69), or square (≥0.70). This classification was used to relate tooth form to the shape of the face and compare the form of MCI between men and women. Association between the shape of the MCI and the face was determined by Chi-square test using R 3.3.1 software. The most prevalent tooth form among the subjects was ovoid (women, 32%; men, 31%) followed by tapered (women, 13%; men, 16%). The least prevalent shape was square (women, 5%; men, 3%). The most prevalent face shape was tapered (women, 34%; men, 25%) followed by ovoid (women, 15%; men, 22%) and the least prevalent was square (women, 1%; men, 3%). An association between face shape and tooth form was statistically not significant. The most prevalent tooth form in both men and women was ovoid, and the least prevalent was square. The association between face shape and tooth form was not significant and did not abide by William's "Law of Harmony." However, there was an association between face shape and gender. © 2017 by the American College of Prosthodontists.

Heat-Transfer Measurements in Free Flight at Mach Numbers up to 14.6 on a Flat-Faced Conical Nose with a Total Angle of 29 Degrees

NASA Technical Reports Server (NTRS)

Rumsey, Charles B; Lee, Dorothy B

1958-01-01

Skin-temperature measurements have been made at several locations on a flat-faced cone-cylinder nose which was flight tested on a fivestage rocket-propeller model to a Mach number of 14.64 and a free-stream Reynolds number of 2.0 x 10(exp 6), based on flat-face diameter, at an altitude of 66,300 feet. The copper nose had a 29 deg total-angle conical section which was 1.6 flat-face diameters long. The aerodynamic-heating rates determined from the temperature measurements reached 1,440 Btu/( sec) (sq ft) on the flat face. The heating rates near the center of the flat face agreed well at Mach numbers up to 13.6 with those obtained by a theory for laminar stagnation-point heating in equilibrium dissociated air (Avco Res. Rep. 1). At Mach numbers above 13.6, the heating rates at locations near the center of the flat face became progressively lower than stagnation-point theory and. were 29 percent lower at Mach number 14.6 at the end. of the test. The reason for this behavior of the heating on the central part of the flat face was not determined. Excluding the relatively low heating rates that occurred on the central part of the nose at the highest Mach numbers, the distribution of experimental heating along the innermost 0.79 of the flat-face radius, expressed as a percentage of stagnation-point heating, was in fair agreement with the distribution predicted by laminar theory. At a location of 0.71 radii from the stagnation point, the experimental heating was very near 130 percent of the theoretical stagnation-point rate at Mach numbers from 11 to 14.5. The experimental beating rates on the conical section of the nose were in good agreement with laminar-cone theory using the assumption of theoretical sharp-cone static pressure on the conical section.

The effect of the interaction of cracks in orthotropic layered materials under compressive loading.

PubMed

Winiarski, B; Guz, I A

2008-05-28

The non-classical problem of fracture mechanics of composites compressed along the layers with interfacial cracks is analysed. The statement of the problem is based on the model of piecewise homogeneous medium, the most accurate within the framework of the mechanics of deformable bodies as applied to composites. The condition of plane strain state is examined. The layers are modelled by a transversally isotropic material (a matrix reinforced by continuous parallel fibres). The frictionless Hertzian contact of the crack faces is considered. The complex fracture mechanics problem is solved using the finite-element analysis. The shear mode of stability loss is studied. The results are obtained for the typical dispositions of cracks. It was found that the interacting crack faces, the crack length and the mutual position of cracks influence the critical strain in the composite.

Low density bismaleimide-carbon microballoon composites. [aircraft and submarine compartment safety

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A. (Inventor)

1978-01-01

A process is described for constructing for a composite laminate structure which exhibits a high resistance to heat and flame provides safer interior structures for aircraft and submarine compartments. Composite laminate structures are prepared by the bismaleimide resin preimpregnation of a fiberglass cloth to form a face sheet which is bonded with a bismaleimide hot melt adhesive to a porous core structure selected from the group consisting of polyamide paper and bismaleimide-glass fabric which is filled with carbon microballoons. The carbon microballoons are prepared by pyrolyzing phenolic micro-balloons in the presence of nitrogen. A slurry of the carbon microballoons is prepared to fill the porous core structure. The porous core structure and face sheet are bonded to provide panel structures exhibiting increased mechanical capacities and lower oxygen limit values and smoke density values.

Evaluation of biochemical urinary stone composition and its relationship to tap water hardness in Qom province, central Iran.

PubMed

Moslemi, Mohammad Kazem; Saghafi, Hossein; Joorabchin, Seyed Mohammad Amin

2011-01-01

The aim of this study was to evaluate the biochemical stone composition in general population of Qom province, central Iran, and its relationship with high tap water hardness. In a prospective study, from March 2008 to July 2011, biochemical analysis of urinary stones in patients living in Qom province for at least 5 years was performed. Stones were retrieved by spontaneous passage, endoscopic or open surgery, and after extracorporeal shockwave lithotripsy. Demographic findings and the drinking water supply of patients were evaluated and compared with biochemical stone analysis. Stone analysis was performed in 255 patients. The most dominant composition of urinary stones was calcium oxalate (73%), followed by uric acid (24%), ammonium urate (2%), and cystine (1%). The peak incidence of urinary stone was in patients in their forties. Overall male to female ratio was 4.93:1. The dominant stone composition in inhabitants of central Iran, where tap water hardness is high, was calcium oxalate stones. On the basis of this study, biochemical urinary stone composition of Qom does not differ from other regions of Iran with lower water hardness.

Are All Active Galactic Nuclei Born Equal? The Silicate Dust Mineralogy Perspective

NASA Astrophysics Data System (ADS)

Li, Aigen

Dust is the cornerstone of the unification theory of active galactic nuclei (AGNs). This theory proposes that all AGNs are essentially the same object or "born equal" but viewed from different lines of sight; much of the observed diversity arises from different viewing angles toward the central engine and a dusty toroidal structure around it. When the dusty torus is viewed face-on, both the central engine and the broad-line regions can be seen directly causing objects to appear as type 1 AGNs; when the dusty torus is viewed edge- on, the anisotropic obscuration created by the torus causes objects to appear as type 2 AGNs. It is this crucial role played by dust in the unified model of AGNs that makes understanding dust properties very important in understanding AGNs. Little is known about the dust in the circumnuclear torus of AGNs. There is evidence suggesting that the size and composition of the dust in AGNs may differ substantially from that of the Galactic interstellar dust, as reflected by the flat or "gray" extinction, and the anomalous silicate emission or absorption features observed respectively in type 1 and type 2 AGNs. The silicate feature profiles of AGNs are rather diverse in peak wavelengths, widths, strengths, and band ratios of the 18 micrometer O--Si--O feature to the 9.7 micrometer Si--O feature, suggesting that the AGN silicate grains are diverse in composition and size (or probably not "born equal"). We propose a two-year project to study the size and composition of the dust in AGNs, with special attention paid to the silicate mineralogy. We will obtain constraints on the silicate composition and size by modeling the Spitzer IRS spectra of >100 AGNs of various types. We will examine whether (and how) the silicate composition and size properties vary with the properties of an AGN (e.g. type, luminosity). This research will improve our understanding of the physical properties of the dust torus and the origin of the observed silicate emission: whether it arises mainly from the torus or from the narrow line regions. We will also provide the community with "recommended" silicate opacities for AGNs of various types. This will facilitate more detailed radiative transfer modeling of the infrared spectral energy distributions of AGNs by incorporating more realistic silicate opacities. This research supports the NASA Strategic Subgoal 3C: Discover the origin, structure, evolution, and destiny of the universe.

Elements of person knowledge: Episodic recollection helps us to identify people but not to recognize their faces.

PubMed

MacKenzie, Graham; Donaldson, David I

2016-12-01

Faces automatically draw attention, allowing rapid assessments of personality and likely behaviour. How we respond to people is, however, highly dependent on whether we know who they are. According to face processing models person knowledge comes from an extended neural system that includes structures linked to episodic memory. Here we use scalp recorded brain signals to demonstrate the specific role of episodic memory processes during face processing. In two experiments we recorded Event-Related Potentials (ERPs) while participants made identify, familiar or unknown responses to famous faces. ERPs revealed neural signals previously associated with episodic recollection for identify but not familiar faces. These findings provide novel evidence suggesting that recollection is central to face processing, providing one source of person knowledge that can be used to moderate the initial impressions gleaned from the core neural system that supports face recognition. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Remembering faces and scenes: The mixed-category advantage in visual working memory.

PubMed

Jiang, Yuhong V; Remington, Roger W; Asaad, Anthony; Lee, Hyejin J; Mikkalson, Taylor C

2016-09-01

We examined the mixed-category memory advantage for faces and scenes to determine how domain-specific cortical resources constrain visual working memory. Consistent with previous findings, visual working memory for a display of 2 faces and 2 scenes was better than that for a display of 4 faces or 4 scenes. This pattern was unaffected by manipulations of encoding duration. However, the mixed-category advantage was carried solely by faces: Memory for scenes was not better when scenes were encoded with faces rather than with other scenes. The asymmetry between faces and scenes was found when items were presented simultaneously or sequentially, centrally, or peripherally, and when scenes were drawn from a narrow category. A further experiment showed a mixed-category advantage in memory for faces and bodies, but not in memory for scenes and objects. The results suggest that unique category-specific interactions contribute significantly to the mixed-category advantage in visual working memory. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Oxidation of boron nitride in an arc heated jet.

NASA Technical Reports Server (NTRS)

Buckley, J. D.

1971-01-01

Two grades of hot pressed boron nitride and a boron nitride composite were subjected to oxidation tests in a 2.5 megawatt atmospheric arc jet. The results showed that fabrication and/or composition influenced thermal shock and oxidation resistance. Changes in surface structure and recession due to oxidation suggest correlation with specimen composition. The boron nitride composite reacted with the oxygen in the hot subsonic airstream to produce a glassy coating on the hot face surface.

The architecture of the joint head cuticle and its transition to the arthrodial membrane in the terrestrial crustacean Porcellio scaber.

PubMed

Ruangchai, Sukhum; Reisecker, Christian; Hild, Sabine; Ziegler, Andreas

2013-04-01

The cuticle of terrestrial isopods is an interesting model for the study of structure-function relationships in biological composite materials. Its organic matrix has a hierarchically organised structure, and type and phase of the mineral compound can vary. The cuticle forms functionally diverse skeletal elements whose properties are adapted to their specific functions. In order to better understand the relation between structure, composition and function of isopod cuticle, we studied the structure and composition of the joint head that is part of the pereiopod's basis. It consists of a central region, whose shape fits well into the joint socket, and an edge region that is connected to the soft arthrodial membrane and protects the central region from mechanical load. The cuticle architecture of the joint head has local variations in structure and composition. In the central region the cuticle is similar to the previously published tergite cuticle. High concentrations of amorphous calcium phosphate are located in the endocuticle suggesting a coexistence with amorphous calcium carbonate. The edge region has an unexpected organisation characterised by thickening of the epi- and exocuticle and an unusual unidirectional orientation of chitin-protein fibrils within the endocuticle. The concentrations of phosphate are considerably higher than in the central region. The overall differentiation in the cuticular architecture of the edge in comparison to the central region reflects the adaptation to mechanical strains the cuticle has to sustain during contraction of extensor muscles, and to the structural and compositional transition from the edge to the connecting arthrodial membrane. Copyright © 2013 Elsevier Inc. All rights reserved.

Erosional patterns of the Isles Dernieres, Louisiana, in relation to meteorological influences

USGS Publications Warehouse

Dingler, J.R.; Reiss, T.E.; Plant, N.G.

1993-01-01

Over the past 100 years, the Isles Dernieres, a low-lying barrier-island chain along the central Louisiana coast, has eroded extensively. This erosion has resulted in more than 1 km of northward beach-face retreat and the loss of 71% of the total island area. The primary causes for the erosion are wind and wave attack, diminished sand supply, and relative sea-level rise. Five years of detailed topographic surveys show that a beach on the central Isles Dernieres changed significantly in both shape and sediment volume; however, the pattern of change was not the same each year. In contrast to the relatively slow erosion caused by cold fronts, hurricane Gilbert, a category 5 hurricane that passed about 800 km south of the Isles Dernieres in September 1988, produced differential beach-face retreat of about 9 m at mean sea level and 40 m at an elevation of 0.5 m. Most of the sediment eroded from the beach face was deposited on the backshore, which resulted in only a small loss of sediment from the beach and a noteworthy decrease in beach-face slope. During the two years following hurricane Gilbert, the mean-sea-level contour remained stationary while the beach face slowly returned to its pre-Gilbert shape. "Cold-front' magnitude of retreat is expected to continue until another large hurricane alters the erosional pattern. -from Authors

CEE/CA: Report calls for decriminalization of sex work.

PubMed

Betteridge, Glenn

2006-04-01

In December 2005, the Central and Eastern European Harm Reduction Network (CEEHRN) released a report calling for the decriminalization of sex work in the 27 countries of Central and Eastern Europe and Central Asia (CEE/CA). The report brings together a wealth of published and original information concerning sex work, laws regulating sex work, epidemiological data regarding HIV and other sexually transmitted infections (STIs), services available to sex workers, and human rights abuses faced by sex workers.

Influence of fruit and invertebrate consumption on the gut microbiota of wild white-faced capuchins (Cebus capucinus).

PubMed

Mallott, Elizabeth K; Amato, Katherine R; Garber, Paul A; Malhi, Ripan S

2018-03-01

Invertebrate consumption is thought to be an integral part of early hominin diets, and many modern human populations regularly consume insects and other arthropods. This study examines the response of gut microbial community structure and function to changes in diet in wild white-faced capuchins (Cebus capucinus), a primate that incorporates a large proportion of invertebrates in its diet. The goal of the study is to better understand the role of both fruit and invertebrate prey consumption on shaping primate gut microbiomes. Fecal samples (n = 169) and dietary data were collected over 12 months. The V3-V5 region of microbial 16S rRNA genes was amplified and sequenced. The IM-TORNADO pipeline was used to analyze sequences. White-faced capuchin gut bacterial communities were characterized primarily by Firmicutes (41.6%) and Proteobacteria (39.2%). There was a significant relationship between the invertebrate diet composition of individual capuchins and their gut microbiome composition. However, there was no relationship between the fruit diet composition of individual capuchins and their gut microbiome composition, even when examining multiple timescales. The results of our study indicate that there is a stronger relationship between gut microbial community structure and invertebrate diet composition than between gut microbial community structure and fruit consumption. As invertebrates and other animal prey play an important role in the diet of many primates, these results give important insight into the role of faunivory in shaping the evolution of host-microbe interactions in primates. © 2018 Wiley Periodicals, Inc.

Structural Analysis and Optimization of a Composite Fan Blade for Future Aircraft Engine

NASA Technical Reports Server (NTRS)

Coroneos, Rula M.

2012-01-01

This report addresses the structural analysis and optimization of a composite fan blade sized for a large aircraft engine. An existing baseline solid metallic fan blade was used as a starting point to develop a hybrid honeycomb sandwich construction with a polymer matrix composite face sheet and honeycomb aluminum core replacing the original baseline solid metallic fan model made of titanium. The focus of this work is to design the sandwich composite blade with the optimum number of plies for the face sheet that will withstand the combined pressure and centrifugal loads while the constraints are satisfied and the baseline aerodynamic and geometric parameters are maintained. To satisfy the requirements, a sandwich construction for the blade is proposed with composite face sheets and a weak core made of honeycomb aluminum material. For aerodynamic considerations, the thickness of the core is optimized whereas the overall blade thickness is held fixed so as to not alter the original airfoil geometry. Weight is taken as the objective function to be minimized by varying the core thickness of the blade within specified upper and lower bounds. Constraints are imposed on radial displacement limitations and ply failure strength. From the optimum design, the minimum number of plies, which will not fail, is back-calculated. The ply lay-up of the blade is adjusted from the calculated number of plies and final structural analysis is performed. Analyses were carried out by utilizing the OpenMDAO Framework, developed at NASA Glenn Research Center combining optimization with structural assessment.

Successful Recovery and Transplantation of 11 Organs Including Face, Bilateral Upper Extremities, and Thoracic and Abdominal Organs From a Single Deceased Organ Donor.

PubMed

Tullius, Stefan G; Pomahac, Bohdan; Kim, Heung Bae; Carty, Matthew J; Talbot, Simon G; Nelson, Helen M; Delmonico, Francis L

2016-10-01

We report on the to date largest recovery of 11 organs from a single deceased donor with the transplantation of face, bilateral upper extremities, heart, 1 lung, liver (split for 2 recipients), kidneys, pancreas, and intestine. Although logistically challenging, this case demonstrates the feasibility and safety of the recovery of multiple thoracic and abdominal organs with multiple vascular composite allotransplants and tissues. Our experience of 8 additional successful multiple vascular composite allotransplants, thoracic, and abdominal organ recoveries suggests that such procedures are readily accomplishable from the same deceased donor.

Positioning Vascularized Composite Allotransplantation within the Spectrum of Transplantation

DTIC Science & Technology

2015-10-01

1 AWARD NUMBER: W81XWH-13-2-0057 TITLE: Positioning Vascularized Composite Allotransplantation within the Spectrum of Transplantation...Positioning Vascularized Composite Allotransplantation within the Spectrum of Transplantation 5b. GRANT NUMBER W81XWH-13-2-0057 5c. PROGRAM ELEMENT...Finally in Aim 8 we will develop standardization of protocols and clinical monitoring and treatment for VCA targeting vascular health. hand and face

PRELIMINARY PROGRESS IN THE DEVELOPMENT OF DUCTILE-PHASE TOUGHENED TUNGSTEN FOR PLASMA-FACING MATERIALS: DUAL-PHASE FINITE ELEMENT DAMAGE MODELS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henager, Charles H.; Nguyen, Ba Nghiep; Kurtz, Richard J.

The objective of this study is to develop a finite element continuum damage model suitable for modeling deformation, cracking, and crack bridging for W-Cu, W-Ni-Fe, and other ductile phase toughened W-composites, or more generally, any multi-phase composite structure where two or more phases undergo cooperative deformation in a composite system.

Long-term trends in climate and hydrology in an agricultural headwater watershed of central Pennsylvania, USA

USDA-ARS?s Scientific Manuscript database

Climate change has emerged as a key issue facing agriculture and water resources in the US. Long-term (1968-2012) temperature, precipitation and streamflow data from a small (7.3 km2) watershed in east-central Pennsylvania was used to examine climatic and hydrologic trends in the context of recent c...

6. VIEW OF THE EASTERN BRIDGE ELEVATION, SHOWING CENTRAL PIER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW OF THE EASTERN BRIDGE ELEVATION, SHOWING CENTRAL PIER AND ASSOCIATED SUPERSTRUCTURE, AND CANTILEVERED NORTHERN TRUSS SECTION. NOTE THE JOIN BETWEEN EYE-BAR (LEFT) AND RIVETED CHANNEL (RIGHT) LOWER BRIDGE CHORDS AT CENTER LEFT OF PHOTOGRAPH. FACING NORTH. - Coverts Crossing Bridge, Spanning Mahoning River along Township Route 372 (Covert Road), New Castle, Lawrence County, PA

Education and Work for the Year 2000: Choices We Face. The Jossey-Bass Education Series.

ERIC Educational Resources Information Center

Wirth, Arthur G.

In view of the complex changes going on in work and schooling in the United States, organizational innovations are necessary if both institutions are to regain their competitive edge. The nation is pulled by two value traditions: a bureaucratic, centralized control tradition versus the tradition of democratic ideals. The centralized control…

Lichen communities and species indicate climate thresholds in southeast and south-central Alaska, USA

Treesearch

Heather T. Root; Bruce McCune; Sarah Jovan

2014-01-01

Because of their unique physiology, lichen communities are highly sensitive to climatic conditions,making them ideal bioindicators for climate change. Southeast and south-central Alaska host diverse and abundant lichen communities and are faced with a more rapidly changing climate than many more southerly latitudes. We develop sensitive lichen-based indicators for...

Achieving Coherence in District Improvement: Managing the Relationship between the Central Office and Schools

ERIC Educational Resources Information Center

Johnson, Susan Moore; Marietta, Geoff; Higgins, Monica C.; Mapp, Karen L.; Grossman, Allen

2015-01-01

"Achieving Coherence in District Improvement" focuses on a problem of practice faced by educational leaders across the nation: how to effectively manage the relationship between the central office and schools. The book is based on a study of five large urban districts that have demonstrated improvement in student achievement. The…

Psyllium husk gum: an attractive carbohydrate biopolymer for the production of stable canthaxanthin emulsions.

PubMed

Gharibzahedi, Seyed Mohammad Taghi; Razavi, Seyed Hadi; Mousavi, Seyed Mohammad

2013-02-15

The physical stability of the ultrasonically prepared emulsions containing canthaxanthin (CX) produced by Dietzia natronolimnaea HS-1 strain was maximized using a face central composite design (FCCD) of response surface methodology (RSM). The linear and interaction effects of main emulsion components (whey protein isolate (WPI, 0.4-1.2 wt%), psyllium husk gum (PHG, 1.5-4.5 wt%) and coconut oil (CO, 5-10 wt%)) on the stability were studied. The density, turbidity and droplet size of emulsions were also characterized to interpret the stability data. A significant second-order polynomial model was established (p<0.0001). Maximum stability of 98.8% was predicted at the optimum levels of formulation variables (WPI concentration 1.20 wt%, PHG content 3.30 wt%, CO concentration 5.43 wt%). The results also demonstrated that CO and WPI concentration had greater effect on the droplet size and density values, whereas the PHG:WPI ratio had a rather greater effect on the turbidity values. Copyright © 2012 Elsevier Ltd. All rights reserved.

Improvement of halophilic cellulase production from locally isolated fungal strain.

PubMed

Gunny, Ahmad Anas Nagoor; Arbain, Dachyar; Jamal, Parveen; Gumba, Rizo Edwin

2015-07-01

Halophilic cellulases from the newly isolated fungus, Aspergillus terreus UniMAP AA-6 were found to be useful for in situ saccharification of ionic liquids treated lignocelluloses. Efforts have been taken to improve the enzyme production through statistical optimization approach namely Plackett-Burman design and the Face Centered Central Composite Design (FCCCD). Plackett-Burman experimental design was used to screen the medium components and process conditions. It was found that carboxymethylcellulose (CMC), FeSO4·7H2O, NaCl, MgSO4·7H2O, peptone, agitation speed and inoculum size significantly influence the production of halophilic cellulase. On the other hand, KH2PO4, KOH, yeast extract and temperature had a negative effect on enzyme production. Further optimization through FCCCD revealed that the optimization approach improved halophilic cellulase production from 0.029 U/ml to 0.0625 U/ml, which was approximately 2.2-times greater than before optimization.

Improvement of halophilic cellulase production from locally isolated fungal strain

PubMed Central

Gunny, Ahmad Anas Nagoor; Arbain, Dachyar; Jamal, Parveen; Gumba, Rizo Edwin

2014-01-01

Halophilic cellulases from the newly isolated fungus, Aspergillus terreus UniMAP AA-6 were found to be useful for in situ saccharification of ionic liquids treated lignocelluloses. Efforts have been taken to improve the enzyme production through statistical optimization approach namely Plackett–Burman design and the Face Centered Central Composite Design (FCCCD). Plackett–Burman experimental design was used to screen the medium components and process conditions. It was found that carboxymethylcellulose (CMC), FeSO4·7H2O, NaCl, MgSO4·7H2O, peptone, agitation speed and inoculum size significantly influence the production of halophilic cellulase. On the other hand, KH2PO4, KOH, yeast extract and temperature had a negative effect on enzyme production. Further optimization through FCCCD revealed that the optimization approach improved halophilic cellulase production from 0.029 U/ml to 0.0625 U/ml, which was approximately 2.2-times greater than before optimization. PMID:26150755

Optimization of Manganese Reduction in Biotreated POME onto 3A Molecular Sieve and Clinoptilolite Zeolites.

PubMed

Jami, Mohammed S; Rosli, Nurul-Shafiqah; Amosa, Mutiu K

2016-06-01

Availability of quality-certified water is pertinent to the production of food and pharmaceutical products. Adverse effects of manganese content of water on the corrosion of vessels and reactors necessitate that process water is scrutinized for allowable concentration levels before being applied in the production processes. In this research, optimization of the adsorption process conditions germane to the removal of manganese from biotreated palm oil mill effluent (BPOME) using zeolite 3A subsequent to a comparative adsorption with clinoptilolite was studied. A face-centered central composite design (FCCCD) of the response surface methodology (RSM) was adopted for the study. Analysis of variance (ANOVA) for response surface quadratic model revealed that the model was significant with dosage and agitation speed connoting the main significant process factors for the optimization. R(2) of 0.9478 yielded by the model was in agreement with predicted R(2). Langmuir and pseudo-second-order suggest the adsorption mechanism involved monolayer adsorption and cation exchanging.

IC 4663: The First Unambiguous [WN] Wolf-Rayet Central Star of a Planetary Nebula

NASA Astrophysics Data System (ADS)

Miszalski, B.; Crowther, P. A.; De Marco, O.; Köppen, J.; Moffat, A. F. J.; Acker, A.; Hillwig, T. C.

2013-01-01

Several [WC]-type central stars of planetary nebulae (PNe) are known to mimic the spectroscopic appearance of massive carbon-rich or WC-type Wolf-Rayet stars. In stark contrast, no [WN]-type central stars have yet been identified as clear-cut analogues of the common nitrogen-rich or WN-type Wolf-Rayet stars. We have identified the [WN3] central star of IC 4663 to be the first unambiguous example in PNe. The low luminosity nucleus and an asymptotic giant branch (AGB) halo surrounding the main nebula prove the bona-fide PN nature of IC 4663. Model atmosphere analysis reveals the [WN3] star to have an exotic chemical composition of helium (95%), hydrogen (<2%), nitrogen (0.8%), neon (0.2%) and oxygen (0.05%) by mass. Such an extreme helium-dominated composition cannot be predicted by current evolutionary scenarios for hydrogen deficient [WC]-type central stars. Only with the discovery of IC 4663 and its unusual composition can we now connect [WN] central stars to the O(He) central stars in a second H-deficient and He-rich evolutionary sequence, [WN]→O(He), that exists in parallel to the carbon-rich [WC]→PG1159 sequence. This suggests a simpler mechanism, perhaps a binary merger, can better explain H-deficiency in PNe and potentially other H-deficient/He-rich stars. In this respect IC 4663 is the best supported case for a possible merged binary central star of a PN.

Is facial skin tone sufficient to produce a cross-racial identification effect?

PubMed

Alley, T R; Schultheis, J A

2001-06-01

Research clearly supports the existence of an other race effect for human faces whereby own-race faces are more accurately perceived and recognized. Why this occurs remains unclear. A computerized program (Mac-a-Mug Pro) for face composition was used to create pairs of target and distractor faces that differed only in skin tone. The six target faces were rated on honesty and aggressiveness by 72 university students, with just one 'Black' and one 'White' face viewed by each student. One week later, they attempted to identify these faces in four lineups: two with target-present and two with target-absent. The order of presentation of targets, lineups, and faces within lineups was varied. Own-race identification was slightly better than cross-racial identification. There was no significant difference in the confidence of responses to own- versus other-race faces. These results indicate that neither morphological variation nor differential confidence is necessary for a cross-racial identification effect.

Surgical anatomy of the middle premasseter space and its application in sub-SMAS face lift surgery.

PubMed

Mendelson, Bryan C; Wong, Chin-Ho

2013-07-01

The premasseter space is a recognized, sub-superficial musculoaponeurotic system (SMAS) soft-tissue space overlying the lower masseter immediately anterior to the parotid. The performance, safety, and effectiveness of composite face lifts are enhanced when the space is used. This has drawn attention to the need for better understanding of the premasseter anatomy above the space. The anatomy of the upper premasseter region was investigated in 20 fresh cadaver dissections as well as intraoperatively in hundreds of composite face lifts. A small, transverse, rectangular soft-tissue space overlies the upper masseter and was named the middle premasseter space. The space (transverse width, 25 to 28 mm; vertical width, 10 mm) is separated from the originally described (lower) premasseter space by a double membrane. It is a safe space between the upper and lower buccal trunks of the facial nerve, which are immediately outside the space and separated from it by the respective upper and lower boundary membranes. The parotid duct immediately beneath the floor of the space usually underlies the upper boundary membrane. The middle premasseter space is significant, as it is the center of the key anatomy immediately cephalad to the lower premasseter space. When used in composite face lifts, the space provides predictable sub-SMAS dissection between the buccal trunks of the facial nerve to the mobile area beyond the anterior border of the masseter where the SMAS overlies the buccal fat pad.

Changes in collection efficiency in nylon net filter media through magnetic alignment of elongated aerosol particles.

PubMed

Lam, Christopher O; Finlay, W H

2009-10-01

Fiber aerosols tend to align parallel to surrounding fluid streamlines in shear flows, making their filtration more difficult. However, previous research indicates that composite particles made from cromoglycic acid fibers coated with small nanoscaled magnetite particles can align with an applied magnetic field. The present research explored the effect of magnetically aligning these fibers to increase their filtration. Nylon net filters were challenged with the aerosol fibers, and efficiency tests were performed with and without a magnetic field applied perpendicular to the flow direction. We investigated the effects of varying face velocities, the amount of magnetite material on the aerosol particles, and magnetic field strengths. Findings from the experiments, matched by supporting single-fiber theories, showed significant efficiency increases at the low face velocity of 1.5 cm s(-1) at all magnetite compositions, with efficiencies more than doubling due to magnetic field alignment in certain cases. At a higher face velocity of 5.12 cm s(-1), filtration efficiencies were less affected by the magnetic field alignment being, at most, 43% higher for magnetite weight compositions up to 30%, while at a face velocity of 10.23 cm s(-1) alignment effects were insignificant. In most cases, efficiencies became independent of magnetic field strength above 50 mT, suggesting full alignment of the fibers. The present data suggest that fiber alignment in a magnetic field may warrant applications in the filtration and detection of fibers, such as asbestos.

A Survey of nearby, nearly face-on spiral galaxies

NASA Astrophysics Data System (ADS)

Garmire, Gordon

2014-09-01

This is a continuation of a survey of nearby, nearly face-on spiral galaxies. The main purpose is to search for evidence of collisions with small galaxies that show up in X-rays by the generation of hot shocked gas from the collision. Secondary objectives include study of the spatial distribution point sources in the galaxy and to detect evidence for a central massive blackhole.

An Investigation into Challenges Faced by Secondary School Teachers and Pupils in Algebraic Linear Equations: A Case of Mufulira District, Zambia

ERIC Educational Resources Information Center

Samuel, Koji; Mulenga, H. M.; Angel, Mukuka

2016-01-01

This paper investigates the challenges faced by secondary school teachers and pupils in the teaching and learning of algebraic linear equations. The study involved 80 grade 11 pupils and 15 teachers of mathematics, drawn from 4 selected secondary schools in Mufulira district, Zambia in Central Africa. A descriptive survey method was employed to…

DoD Implementation of the Better Buying Power Initiatives

DTIC Science & Technology

2012-12-01

statutory measures (Budget Control Act of 2011), Congress has been directed to face this problem and provide a workable solution or face the evils...Defense Support Program (DSP) to provide the capabilities that the SBIRS has had problems delivering (Richelson, 2007; Werner, 2011). The purpose of the...Defense David Packard took office. They were keen on addressing the problems plaguing defense acquisition: excessive centralization, inefficiencies

Piezoelectric film load cell robot collision detector

DOEpatents

Lembke, J.R.

1988-03-15

A piezoelectric load cell which can be utilized for detecting collisions and obstruction of a robot arm end effector includes a force sensing element of metallized polyvinylidene fluoride (PVDF) film. The piezoelectric film sensing element and a resilient support pad are clamped in compression between upper and lower plates. The lower plate has a central recess in its upper face for supporting the support pad and sensing element, while the upper plate has a corresponding central projection formed on its lower face for bearing on the sensing element and support pad. The upper and lower plates are dowelled together for concentric alignment and screwed together. The upper and lower plates are also adapted for mounting between the robot arm wrist and end effector. 3 figs.

Piezoelectric film load cell robot collision detector

DOEpatents

Lembke, John R.

1989-04-18

A piezoelectric load cell which can be utilized for detecting collisions and obstruction of a robot arm end effector includes a force sensing element of metallized polyvinylidene fluoride (PVDF) film. The piezoelectric film sensing element and a resilient support pad are clamped in compression between upper and lower plates. The lower plate has a central recess in its upper face for supporting the support pad and sensing element, while the upper plate has a corresponding central projection formed on its lower face for bearing on the sensing element and support pad. The upper and lower plates are dowelled together for concentric alignment and screwed together. The upper and lower plates are also adapted for mounting between the robot arm wrist and end effector.

Piezoelectric film load cell robot collision detector

DOEpatents

Lembke, J.R.

1989-04-18

A piezoelectric load cell which can be utilized for detecting collisions and obstruction of a robot arm end effector includes a force sensing element of metallized polyvinylidene fluoride (PVDF) film. The piezoelectric film sensing element and a resilient support pad are clamped in compression between upper and lower plates. The lower plate has a central recess in its upper face for supporting the support pad and sensing element, while the upper plate has a corresponding central projection formed on its lower face for bearing on the sensing element and support pad. The upper and lower plates are doweled together for concentric alignment and screwed together. The upper and lower plates are also adapted for mounting between the robot arm wrist and end effector. 3 figs.

Identifying Phytoplankton Classes In California Reservoirs Using HPLC Pigment Analysis

NASA Astrophysics Data System (ADS)

Siddiqui, S.; Peacock, M. B.; Kudela, R. M.; Negrey, K.

2014-12-01

Few bodies of water are routinely monitored for phytoplankton composition due to monetary and time constraints, especially the less accessible bodies of water in central and southern California. These lakes and estuaries are important for economic reasons such as tourism and fishing. This project investigated the composition of phytoplankton present using pigment analysis to identify dominant phytoplankton groups. A total of 28 different sites with a wide range of salinity (0 - 60) in central and southern California were examined. These included 13 different bodies of water in central California: 6 in the Sierras, 7 in the San Francisco Bay Estuary, and 15 from southern California. The samples were analyzed using high-performance liquid-chromatography (HPLC) to quantify the pigments present (using retention time and the spectral thumbprint). Diagnostic pigments were used to indicate the phytoplankton class composition, focusing on diatoms, dinoflagellates, cryptophytes, and cyanobacteria - all key phytoplankton groups indicative of the health of the sampled reservoir. Our results indicated that cyanobacteria dominated four of the seven bodies of central California water (Mono Lake, Bridgeport Reservoir, Steamboat Slough, and Pinto Lake); cryptophytes and nannoflagellates dominated two of the central California bodies of water (Mare Island Strait and Topaz Lake); and diatoms and dinoflagellates dominated one central California body of water, Oakland Inner Harbor, comprising more than 70% of the phytoplankton present. We expect the bodies of water from Southern California to be as disparate. Though this data is only a snapshot, it has significant implications in comparing different ecosystems across California, and it has the potential to provide valuable insight into the composition of phytoplankton communities.

Performance-Based Assessment in an Online Course: Comparing Different Types of Information Literacy Instruction

ERIC Educational Resources Information Center

Mery, Yvonne; Newby, Jill; Peng, Ke

2012-01-01

This study investigates whether the type of instruction (a single face-to-face librarian-led instruction, instructor-led instruction, or an online IL course--the Online Research Lab) has an impact on student information literacy gains in a Freshman English Composition program. A performance-based assessment was carried out by analyzing…

Urinary oxytocin positively correlates with performance in facial visual search in unmarried males, without specific reaction to infant face.

PubMed

Saito, Atsuko; Hamada, Hiroki; Kikusui, Takefumi; Mogi, Kazutaka; Nagasawa, Miho; Mitsui, Shohei; Higuchi, Takashi; Hasegawa, Toshikazu; Hiraki, Kazuo

2014-01-01

The neuropeptide oxytocin plays a central role in prosocial and parental behavior in non-human mammals as well as humans. It has been suggested that oxytocin may affect visual processing of infant faces and emotional reaction to infants. Healthy male volunteers (N = 13) were tested for their ability to detect infant or adult faces among adult or infant faces (facial visual search task). Urine samples were collected from all participants before the study to measure the concentration of oxytocin. Urinary oxytocin positively correlated with performance in the facial visual search task. However, task performance and its correlation with oxytocin concentration did not differ between infant faces and adult faces. Our data suggests that endogenous oxytocin is related to facial visual cognition, but does not promote infant-specific responses in unmarried men who are not fathers.

Sex differences in face gender recognition: an event-related potential study.

PubMed

Sun, Yueting; Gao, Xiaochao; Han, Shihui

2010-04-23

Multiple level neurocognitive processes are involved in face processing in humans. The present study examined whether the early face processing such as structural encoding is modulated by task demands that manipulate attention to perceptual or social features of faces and such an effect, if any, is different between men and women. Event-related brain potentials were recorded from male and female adults while they identified a low-level perceptual feature of faces (i.e., face orientation) and a high-level social feature of faces (i.e., gender). We found that task demands that required the processing of face orientations or face gender resulted in modulations of both the early occipital/temporal negativity (N170) and the late central/parietal positivity (P3). The N170 amplitude was smaller in the gender relative to the orientation identification task whereas the P3 amplitude was larger in the gender identification task relative to the orientation identification task. In addition, these effects were much stronger in women than in men. Our findings suggest that attention to social information in faces such as gender modulates both the early encoding of facial structures and late evaluative process of faces to a greater degree in women than in men.

Robust Selectivity for Faces in the Human Amygdala in the Absence of Expressions

PubMed Central

Mende-Siedlecki, Peter; Verosky, Sara C.; Turk-Browne, Nicholas B.; Todorov, Alexander

2014-01-01

There is a well-established posterior network of cortical regions that plays a central role in face processing and that has been investigated extensively. In contrast, although responsive to faces, the amygdala is not considered a core face-selective region, and its face selectivity has never been a topic of systematic research in human neuroimaging studies. Here, we conducted a large-scale group analysis of fMRI data from 215 participants. We replicated the posterior network observed in prior studies but found equally robust and reliable responses to faces in the amygdala. These responses were detectable in most individual participants, but they were also highly sensitive to the initial statistical threshold and habituated more rapidly than the responses in posterior face-selective regions. A multivariate analysis showed that the pattern of responses to faces across voxels in the amygdala had high reliability over time. Finally, functional connectivity analyses showed stronger coupling between the amygdala and posterior face-selective regions during the perception of faces than during the perception of control visual categories. These findings suggest that the amygdala should be considered a core face-selective region. PMID:23984945

Composition and Rhetoric: A Natural Alliance.

ERIC Educational Resources Information Center

Minot, Walter S.

Writing teachers and theorists face political and pedagogical dangers because of their increasing tendency to align themselves against each other on the side of either rhetoric or composition. As the differences between the two schools widens, writing teachers stand to lose political ground in English departments and their students stand to lose…

Unbalancing Acts: Plagiarism as Catalyst for Instructor Emotion in the Composition Classroom

ERIC Educational Resources Information Center

Biswas, Ann E.

2016-01-01

In this essay, the author reflects on her experiences while researching composition instructors' emotional responses to plagiarism. The research found that instructors faced a variety of complex and competing feelings when students plagiarized, and those responses threatened to upset relationships, power structures, and professional identities in…

Evaluating Implementations of Service Oriented Architecture for Sensor Network via Simulation

DTIC Science & Technology

2011-04-01

Subject: COMPUTER SCIENCE Approved: Boleslaw Szymanski , Thesis Adviser Rensselaer Polytechnic Institute Troy, New York April 2011 (For Graduation May 2011...simulation supports distributed and centralized composition with a type hierarchy and multiple -service statically-located nodes in a 2-dimensional space...distributed and centralized composition with a type hierarchy and multiple -service statically-located nodes in a 2-dimensional space. The second simulation

Holistic processing from learned attention to parts.

PubMed

Chua, Kao-Wei; Richler, Jennifer J; Gauthier, Isabel

2015-08-01

Attention helps us focus on what is most relevant to our goals, and prior work has shown that aspects of attention can be learned. Learned inattention to parts can abolish holistic processing of faces, but it is unknown whether learned attention to parts is sufficient to cause a change from part-based to holistic processing with objects. We trained subjects to individuate nonface objects (Greebles) from 2 categories: Ploks and Glips. Diagnostic information was in complementary halves for the 2 categories. Holistic processing was then tested with Plok-Glip composites that combined the kind of part that was diagnostic or nondiagnostic during training. Exposure to Greeble parts resulted in general failures of selective attention for nondiagnostic composites, but face-like holistic processing was only observed for diagnostic composites. These results demonstrated a novel link between learned attentional control and the acquisition of holistic processing. (c) 2015 APA, all rights reserved).

Changes in Personal Networks of Women in Residential and Outpatient Substance Abuse Treatment

PubMed Central

Min, Meeyoung O.; Tracy, Elizabeth M.; Kim, Hyunsoo; Park, Hyunyong; Jun, MinKyong; Brown, Suzanne; McCarty, Christopher; Laudet, Alexandre

2013-01-01

Changes in personal network composition, support and structure over 12 months were examined in 377 women from residential (n=119) and intensive outpatient substance abuse treatment (n=258) through face-to-face interviews utilizing computer based data collection. Personal networks of women who entered residential treatment had more substance users, more people with whom they had used alcohol and/or drugs, and fewer people from treatment programs or self- help groups than personal networks of women who entered intensive outpatient treatment. By 12 months post treatment intake, network composition improved for women in residential treatment; however, concrete support was still lower and substance users still more prevalent in their networks. Network composition of women in outpatient treatment remained largely the same over time. Both groups increased cohesiveness within the network over 12 months. Targeting interventions that support positive changes in personal networks may heighten positive long term outcomes for women entering treatment. PMID:23755971

Fuel Retention Improvement at High Temperatures in Tungsten-Uranium Dioxide Dispersion Fuel Elements by Plasma-Spray Cladding

NASA Technical Reports Server (NTRS)

Grisaffe, Salvatore J.; Caves, Robert M.

1964-01-01

An investigation was undertaken to determine the feasibility of depositing integrally bonded plasma-sprayed tungsten coatings onto 80-volume-percent tungsten - 20-volume-percent uranium dioxide composites. These composites were face clad with thin tungsten foil to inhibit uranium dioxide loss at elevated temperatures, but loss at the unclad edges was still significant. By preheating the composite substrates to approximately 3700 degrees F in a nitrogen environment, metallurgically bonded tungsten coatings could be obtained directly by plasma spraying. Furthermore, even though these coatings were thin and somewhat porous, they greatly inhibited the loss of uranium dioxide. For example, a specimen that was face clad but had no edge cladding lost 5.8 percent uranium dioxide after 2 hours at 4750 dgrees F in flowing hydrogen. A similar specimen with plasma-spray-coated edges, however, lost only 0.75 percent uranium dioxide under the same testing conditions.

Night-time lighting alters the composition of marine epifaunal communities

PubMed Central

Davies, Thomas W.; Coleman, Matthew; Griffith, Katherine M.; Jenkins, Stuart R.

2015-01-01

Marine benthic communities face multiple anthropogenic pressures that compromise the future of some of the most biodiverse and functionally important ecosystems in the world. Yet one of the pressures these ecosystems face, night-time lighting, remains unstudied. Light is an important cue in guiding the settlement of invertebrate larvae, and altering natural regimes of nocturnal illumination could modify patterns of recruitment among sessile epifauna. We present the first evidence of night-time lighting changing the composition of temperate epifaunal marine invertebrate communities. Illuminating settlement surfaces with white light-emitting diode lighting at night, to levels experienced by these communities locally, both inhibited and encouraged the colonization of 39% of the taxa analysed, including three sessile and two mobile species. Our results indicate that ecological light pollution from coastal development, shipping and offshore infrastructure could be changing the composition of marine epifaunal communities. PMID:25926694

Ultrasound-Assisted Extraction of Cannabinoids from Cannabis Sativa L. Optimized by Response Surface Methodology.

PubMed

Agarwal, Charu; Máthé, Katalin; Hofmann, Tamás; Csóka, Levente

2018-03-01

Ultrasonication was used to extract bioactive compounds from Cannabis sativa L. such as polyphenols, flavonoids, and cannabinoids. The influence of 3 independent factors (time, input power, and methanol concentration) was evaluated on the extraction of total phenols (TPC), flavonoids (TF), ferric reducing ability of plasma (FRAP) and the overall yield. A face-centered central composite design was used for statistical modelling of the response data, followed by regression and analysis of variance in order to determine the significance of the model and factors. Both the solvent composition and the time significantly affected the extraction while the sonication power had no significant impact on the responses. The response predictions obtained at optimum extraction conditions of 15 min time, 130 W power, and 80% methanol were 314.822 mg GAE/g DW of TPC, 28.173 mg QE/g DW of TF, 18.79 mM AAE/g DW of FRAP, and 10.86% of yield. A good correlation was observed between the predicted and experimental values of the responses, which validated the mathematical model. On comparing the ultrasonic process with the control extraction, noticeably higher values were obtained for each of the responses. Additionally, ultrasound considerably improved the extraction of cannabinoids present in Cannabis. Low frequency ultrasound was employed to extract bioactive compounds from the inflorescence part of Cannabis. The responses evaluated were-total phenols, flavonoids, ferric reducing assay and yield. The solvent composition and time significantly influenced the extraction process. Appreciably higher extraction of cannabinoids was achieved on sonication against control. © 2018 Institute of Food Technologists®.

Assembly of the Pamirs: Age and origin of magmatic belts from the southern Tien Shan to the southern Pamirs and their relation to Tibet

USGS Publications Warehouse

Schwab, M.; Ratschbacher, L.; Siebel, W.; McWilliams, M.; Minaev, V.; Lutkov, V.; Chen, F.; Stanek, K.; Nelson, B.; Frisch, W.; Wooden, J.L.

2004-01-01

Magmatic rocks and depositional setting of associated volcaniclastic strata along a north-south traverse spanning the southern Tien Shan and eastern Pamirs of Kyrgyzstan and Tajikistan constrain the tectonics of the Pamirs and Tibet. The northern Pamirs and northwestern Tibet contain the north facing Kunlun suture, the south facing Jinsha suture, and the intervening Carboniferous to Triassic Karakul-Mazar subduction accretion system; the latter is correlated with the Songpan-Garze-Hoh Xi system of Tibet. The Kunlun arc is a composite early Paleozoic to late Paleozoic-Triassic arc. Arc formation in the Pamirs is characterized by ???370-320 Ma volcanism that probably continued until the Triassic. The cryptic Tanymas suture of the southern northern Pamirs is part of the Jinsha suture. A massive ??????227 Ma batholith stitches the Karakul-Mazar complex in the Pamirs. There are striking similarities between the Qiangtang block in the Pamirs and Tibet. Like Tibet, the regional structure of the Pamirs is an anticlinorium that includes the Muskol and Sares domes. Like Tibet, the metamorphic rocks in these domes are equivalents to the Karakul-Mazar-Songpan-Garze system. Granitoids intruding the Qiangtang block yield ???200-230 Ma ages in the Pamirs and in central Tibet. The stratigraphy of the eastern Pshart area in the Pamirs is similar to the Bangong-Nujiang suture zone in the Amdo region of eastern central Tibet, but a Triassic ocean basin sequence is preserved in the Pamirs. Arc-type granitoids that intruded into the eastern Pshart oceanic-basin-arc sequence (???190-160 Ma) and granitoids that cut the southern Qiangtang block (???170-160 Ma) constitute the Rushan-Pshart arc. Cretaceous plutons that intruded the central and southern Pamirs record a long-lasting magmatic history. Their zircons and those from late Miocene xenoliths show that the most distinct magmatic events were Cambro-Ordovician (???410-575 Ma), Triassic (???210-250 Ma; likely due to subduction along the Jinsha suture), Middle Jurassic (???147-195 Ma; subduction along Rushan-Pshart suture), and mainly Cretaceous. Middle and Late Cretaceous magmatism may reflect arc activity in Asia prior to the accretion of the Karakoram block and flat-slab subduction along the Shyok suture north of the Kohistan-Ladakh arc, respectively. Before India and Asia collided, the Pamir region from the Indus-Yarlung to the Jinsha suture was an Andean-style plate margin. Our analysis suggests a relatively simple crustal structure for the Pamirs and Tibet. From the Kunlun arc in the north to the southern Qiangtang block in the south the Pamirs and Tibet likely have a dominantly sedimentary crust, characterized by Karakul-Mazar-Songpan-Garze accretionary wedge rocks. The crust south of the southern Qiangtang block is likely of granodioritic composition, reflecting long-lived subduction, arc formation, and Cretaceous-Cenozoic underthrusting. Copyright 2004 by the American Geophysical Union.

Copernicus crater central peak: lunar mountain of unique composition.

PubMed

Pieters, C M

1982-01-01

Olivine is identified as the major mafic mineral in a central peak of Copernicus crater. Information on the mineral assemblages of such unsampled lunar surface material is provided by near infrared reflectance spectra (0.7 to 2.5 micrometers) obtained with Earth-based telescopes. The composition of the deep-seated material comprising the Copernicus central peak is unique among measured areas. Other lunar terra areas and the wall of Copernicus exhibit spectral characteristics of mineral assemblages comparable to the feldspathic breccias returned by the Apollo missions, with low-calcium orthopyroxene being the major mafic mineral.

Copernicus crater central peak - Lunar mountain of unique composition

NASA Technical Reports Server (NTRS)

Pieters, C. M.

1982-01-01

Olivine is identified as the major mafic mineral in a central peak of Copernicus crater. Information on the mineral assemblages of such unsampled lunar surface material is provided by near infrared reflectance spectra (0.7 to 2.5 micrometers) obtained with earth-based telescopes. The composition of the deep-seated material comprising the Copernicus central peak is unique among measured areas. Other lunar terra areas and the wall of Copernicus exhibit spectral characteristics of mineral assemblages comparable to the feldspathic breccias returned by the Apollo missions, with low-calcium orthopyroxene being the major mafic mineral.

ELECTRICAL LINES ARRIVE FROM CENTRAL FACILITIES AREA, SOUTH OF MTR. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ELECTRICAL LINES ARRIVE FROM CENTRAL FACILITIES AREA, SOUTH OF MTR. EXCAVATION RUBBLE IN FOREGROUND. CONTRACTOR CRAFT SHOPS, CRANES, AND OTHER MATERIALS ON SITE. CAMERA FACES EAST, WITH LITTLE BUTTE AND MIDDLE BUTTE IN DISTANCE. INL NEGATIVE NO. 335. Unknown Photographer, 7/1/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Planning for What Kind of Teaching? Supporting Cooperating Teachers as Teachers of Planning

ERIC Educational Resources Information Center

Norman, Patricia J.

2011-01-01

Planning is a central task of teaching and a central focus in learning to teach. But what does planning entail, and how is planning best learned? What challenges do experienced teachers serving as school-based teacher educators face in becoming teachers of planning? What role can university teacher educators play in helping mentor teachers learn…

Using composite images to assess accuracy in personality attribution to faces.

PubMed

Little, Anthony C; Perrett, David I

2007-02-01

Several studies have demonstrated some accuracy in personality attribution using only visual appearance. Using composite images of those scoring high and low on a particular trait, the current study shows that judges perform better than chance in guessing others' personality, particularly for the traits conscientiousness and extraversion. This study also shows that attractiveness, masculinity and age may all provide cues to assess personality accurately and that accuracy is affected by the sex of both of those judging and being judged. Individuals do perform better than chance at guessing another's personality from only facial information, providing some support for the popular belief that it is possible to assess accurately personality from faces.

Evaluation of biochemical urinary stone composition and its relationship to tap water hardness in Qom province, central Iran

PubMed Central

Moslemi, Mohammad Kazem; Saghafi, Hossein; Joorabchin, Seyed Mohammad Amin

2011-01-01

Purpose The aim of this study was to evaluate the biochemical stone composition in general population of Qom province, central Iran, and its relationship with high tap water hardness. Materials and methods In a prospective study, from March 2008 to July 2011, biochemical analysis of urinary stones in patients living in Qom province for at least 5 years was performed. Stones were retrieved by spontaneous passage, endoscopic or open surgery, and after extracorporeal shockwave lithotripsy. Demographic findings and the drinking water supply of patients were evaluated and compared with biochemical stone analysis. Results Stone analysis was performed in 255 patients. The most dominant composition of urinary stones was calcium oxalate (73%), followed by uric acid (24%), ammonium urate (2%), and cystine (1%). The peak incidence of urinary stone was in patients in their forties. Overall male to female ratio was 4.93:1. Conclusion The dominant stone composition in inhabitants of central Iran, where tap water hardness is high, was calcium oxalate stones. On the basis of this study, biochemical urinary stone composition of Qom does not differ from other regions of Iran with lower water hardness. PMID:22163171

A Survey of nearby, nearly face-on spiral galaxies

NASA Astrophysics Data System (ADS)

Garmire, Gordon

2014-09-01

This is a continuation of a survey of nearby, nearly face-on spiral galaxies. The main purpose is to search for evidence of collisions with small galaxies that show up in X-rays by the generation of hot shocked gas from the collision. Secondary objectives include study of the spatial distribution point sources in the galaxy and to detect evidence for a central massive blackhole. These are alternate targets.

Effect of height and orientation ( microclimate) on geomorphic degradation rates and processes, late-glacial terrace scarps in central Idaho

USGS Publications Warehouse

Pierce, K.L.; Colman, Steven M.

1986-01-01

Examines the effects of scarp size (height) and orientation (microclimate) by keeping constant variables such as age, lithology, and regional climate. For scarps 2m high, the degradation rate on S-facing scarps is 2 times that on N-facing scarps; for 10-m scarps, it is 5 times. Scarp morphology may be used to estimate age. -from Authors

There Are No Children Here: The Case of an Inner-City School Addressing Issues Facing Children and Families Living in Poverty

ERIC Educational Resources Information Center

Sallee, Mariel; Boske, Christa

2013-01-01

This case is based on real-life experiences of community school members within Horner School--an inner-city public school. Specifically, the case explores challenges faced by Cathleen, a 1st-year, White, female principal, who was hired by central office to "revamp a charter school" to promote a quality education for all children. The case raises…

Autonomic responses to exercise: where is central command?

PubMed

Williamson, J W

2015-03-01

A central command is thought to involve a signal arising in a central area of the brain eliciting a parallel activation of the autonomic nervous system and skeletal muscle contraction during exercise. Although much of the neural circuitry involved in autonomic control has been identified, defining the specific higher brain region(s) serving in a central command capacity has proven more challenging. Investigators have been faced with redundancies in regulatory systems, feedback mechanisms and the complexities ofhuman neural connectivity. Several studies have attempted to address these issues and provide more definitive neuroanatomical information. However, none have clearly answered the question, "where is central command?" Copyright © 2014 Elsevier B.V. All rights reserved.

Tree species composition and structure in an old bottomland hardwood forest in south-central Arkansas

Treesearch

Brian Roy Lockhart; James M. Guldin; Thomas Foti

2010-01-01

Tree species composition and structure was determined for an old bottomland hardwood forest located in the Moro Creek Bottoms Natural Area in south-central Arkansas. Diversity for this forest was high with species richness ranging from 33 for the overstory and sapling strata to 26 for the seedling stratum and Shannon-Weiner values of 2.54 to 1.02 for the overstory and...

The Organisation and Assessment of Composing at Key Stage 4 in English Secondary Schools

ERIC Educational Resources Information Center

Savage, Jonathan; Fautley, Martin

2011-01-01

This paper explores secondary school music teachers' current practice with regard to the organisation and assessment of composing at Key Stage 4. It draws on research undertaken on a nation-wide basis in England, via the use of two online surveys and face-to-face interviews. In terms of the organisation of classroom composition, the study found…

The Impact of Basic Skills on Human Resource Management in the Retailing Industry.

ERIC Educational Resources Information Center

McCord, Alice Bird

A recent survey of retailing firms, ranging from single stores to nationwide chains, showed that the most significant human resources challenge facing these organizations is how to attract and retain qualified employees. Faced with the many changes in the retailing industry and in the composition of the work force that have taken place over the…

Instrument and method for focusing X-rays, gamma rays and neutrons

DOEpatents

Smither, Robert K.

1984-01-01

A crystal diffraction instrument or diffraction grating instrument with an improved crystalline structure or grating spacing structure having a face for receiving a beam of photons or neutrons and diffraction planar spacing or grating spacing along that face with the spacing increasing progressively along the face to provide a decreasing Bragg diffraction angle for a monochromatic radiation and thereby increasing the usable area and acceptance angle. The increased planar spacing for the diffraction crystal is provided by the use of a temperature differential across the crystalline structure, by assembling a plurality of crystalline structures with different compositions, by an individual crystalline structure with a varying composition and thereby a changing planar spacing along its face, and by combinations of these techniques. The increased diffraction grating element spacing is generated during the fabrication of the diffraction grating by controlling the cutting tool that is cutting the grooves or controlling the laser beam, electron beam or ion beam that is exposing the resist layer, etc. It is also possible to vary this variation in grating spacing by applying a thermal gradient to the diffraction grating in much the same manner as is done in the crystal diffraction case.

Instrument and method for focusing x rays, gamma rays, and neutrons

DOEpatents

Smither, R.K.

1982-03-25

A crystal-diffraction instrument or diffraction-grating instrument is described with an improved crystalline structure or grating spacing structure having a face for receiving a beam of photons or neutrons and diffraction planar spacing or grating spacing along that face with the spacing increasing progressively along the face to provide a decreasing Bragg diffraction angle for a monochromatic radiation and thereby increasing the usable area and acceptance angle. The increased planar spacing for the diffraction crystal is provided by the use of a temperature differential across the line structures with different compositions, by an individual crystalline structure with a varying composition and thereby a changing planar spacing along its face, and by combinations of these techniques. The increased diffraction grating element spacing is generated during the fabrication of the diffraction grating by controlling the cutting tool that is cutting the grooves or controlling the laser beam, electron beam, or ion beam that is exposing the resist layer, etc. It is also possible to vary this variation in grating spacing by applying a thermal gradient to the diffraction grating in much the same manner as is done in the crystal-diffraction case.

Research and Practice on Basic Composition and Cultivation Pattern of College Students' Innovative Ability

ERIC Educational Resources Information Center

Xu, Zhenhui; Chen, Hanlin

2010-01-01

Facing the increasingly fierce international competition, it has been the core of higher education to explore how to cultivate college students with innovative ability. College students' innovative ability is mainly composed of basic ability, innovative thinking and innovative actions. In conformity to the above composition, the cultivation…

Approaches for Combining Multiple Measures of Teacher Performance: Reliability, Validity, and Implications for Evaluation Policy

ERIC Educational Resources Information Center

Martínez, José Felipe; Schweig, Jonathan; Goldschmidt, Pete

2016-01-01

A key question facing teacher evaluation systems is how to combine multiple measures of complex constructs into composite indicators of performance. We use data from the Measures of Effective Teaching (MET) study to investigate the measurement properties of composite indicators obtained under various conjunctive, disjunctive (or complementary),…

Advisory Councils for Business Colleges: Composition and Utilization

ERIC Educational Resources Information Center

Ellingson, Dee Ann; Elbert, Dennis J.; Moser, Steven

2010-01-01

A major challenge facing business colleges is keeping up with the rapid changes in the business world. Business advisory councils provide an important link between business colleges and the business world. This study was conducted to gather data on the composition and utilization of these councils. The results reveal that there is widespread use…

Design of new face-centered cubic high entropy alloys by thermodynamic calculation

NASA Astrophysics Data System (ADS)

Choi, Won-Mi; Jung, Seungmun; Jo, Yong Hee; Lee, Sunghak; Lee, Byeong-Joo

2017-09-01

A new face-centered cubic (fcc) high entropy alloy system with non-equiatomic compositions has been designed by utilizing a CALculation of PHAse Diagram (CALPHAD) - type thermodynamic calculation technique. The new alloy system is based on the representative fcc high entropy alloy, the Cantor alloy which is an equiatomic Co- Cr-Fe-Mn-Ni five-component alloy, but fully or partly replace the cobalt by vanadium and is of non-equiatomic compositions. Alloy compositions expected to have an fcc single-phase structure between 700 °C and melting temperatures are proposed. All the proposed alloys are experimentally confirmed to have the fcc single-phase during materials processes (> 800 °C), through an X-ray diffraction analysis. It is shown that there are more chances to find fcc single-phase high entropy alloys if paying attention to non-equiatomic composition regions and that the CALPHAD thermodynamic calculation can be an efficient tool for it. An alloy design technique based on thermodynamic calculation is demonstrated and the applicability and limitation of the approach as a design tool for high entropy alloys is discussed.

Thermographic inspection of marine composite structures

NASA Astrophysics Data System (ADS)

Jones, Thomas S.; Lindgren, Eric A.

1994-03-01

The marine industry is now facing the problems that were faced by the aircraft industry 20 to 25 years ago: glass-fiber-composite structures do not lend themselves to traditional methods of interrogation. Both the material response and the failure modes of composites are different from traditional materials. Infrared thermographic techniques were investigated for application to composite hull structures and found to be very effective in locating and identifying damage to both solid laminate and sandwich panel construction. The thermographic techniques have been applied to cruising as well as racing yachts with good results. Indicated damage has matched well with the damage discovered during repair operations. More recently, the thermographic techniques have been applied to much thicker solid laminate hull construction used in a new U.S. Navy mine hunter, the MHC-51, U.S.S. Osprey. Thermographic investigations were performed on large test panels used to evaluate different material systems for this vessel and on the vessel itself to provide a baseline thermal characterization. Later this year, shock trials will be performed on the U.S.S. Osprey. Additional thermographic studies are planned following the shock trials.

Mechanical spin bearings

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

1998-01-01

A spin bearing assembly including, a pair of mutually opposing complementary bearing support members having mutually spaced apart bearing support surfaces which may be, for example, bearing races and a set of spin bearings located therebetween. Each spin bearing includes a pair of end faces, a central rotational axis passing through the end faces, a waist region substantially mid-way between the end faces and having a first thickness dimension, and discrete side surface regions located between the waist region and the end faces and having a second thickness dimension different from the first thickness dimension of the waist region and wherein the side surface regions further have respective curvilinear contact surfaces adapted to provide a plurality of bearing contact points on the bearing support members.

Laminated Object Manufacturing-Based Design Ceramic Matrix Composites

DTIC Science & Technology

2001-04-01

components for DoD applications. Program goals included the development of (1) a new LOM based design methodology for CMC, (2) optimized preceramic polymer ...3.1.1-20 3.1.1-12 Detail of LOM Composites Forming System w/ glass fiber/ polymer laminate................ 3.1.1-21 3.1.1-13...such as polymer matrix composites have faced similar barriers to implementation. These barriers have been overcome through the development of suitable

Neural and cognitive face-selective markers: An integrative review.

PubMed

Yovel, Galit

2016-03-01

Faces elicit robust and selective neural responses in the primate brain. These neural responses have been investigated with functional MRI and EEG in numerous studies, which have reported face-selective activations in the occipital-temporal cortex and an electrophysiological face-selective response that peaks 170 ms after stimulus onset at occipital-temporal sites. Evidence for face-selective processes has also been consistently reported in cognitive studies, which investigated the face inversion effect, the composite face effect and the left visual field (LVF) superiority. These cognitive effects indicate that the perceptual representation that we generate for faces differs from the representation that is generated for inverted faces or non-face objects. In this review, I will show that the fMRI and ERP face-selective responses are strongly associated with these three well-established behavioral face-selective measures. I will further review studies that examined the relationship between fMRI and EEG face-selective measures suggesting that they are strongly linked. Taken together these studies imply that a holistic representation of a face is generated at 170 ms after stimulus onset over the right hemisphere. These findings, which reveal a strong link between the various and complementary cognitive and neural measures of face processing, allow to characterize where, when and how faces are represented during the first 200 ms of face processing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Differences in holistic processing do not explain cultural differences in the recognition of facial expression.

PubMed

Yan, Xiaoqian; Young, Andrew W; Andrews, Timothy J

2017-12-01

The aim of this study was to investigate the causes of the own-race advantage in facial expression perception. In Experiment 1, we investigated Western Caucasian and Chinese participants' perception and categorization of facial expressions of six basic emotions that included two pairs of confusable expressions (fear and surprise; anger and disgust). People were slightly better at identifying facial expressions posed by own-race members (mainly in anger and disgust). In Experiment 2, we asked whether the own-race advantage was due to differences in the holistic processing of facial expressions. Participants viewed composite faces in which the upper part of one expression was combined with the lower part of a different expression. The upper and lower parts of the composite faces were either aligned or misaligned. Both Chinese and Caucasian participants were better at identifying the facial expressions from the misaligned images, showing interference on recognizing the parts of the expressions created by holistic perception of the aligned composite images. However, this interference from holistic processing was equivalent across expressions of own-race and other-race faces in both groups of participants. Whilst the own-race advantage in recognizing facial expressions does seem to reflect the confusability of certain emotions, it cannot be explained by differences in holistic processing.

Mechanically expandable annular seal

DOEpatents

Gilmore, R.F.

1983-07-19

A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces is described. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluid tight barrier. A counter rotation removes the barrier. 6 figs.

Challenges in the surgical management of ectopic pregnancy in a low-resource setting: Mpilo Central Hospital, Bulawayo, Zimbabwe.

PubMed

Ngwenya, Solwayo

2017-10-01

Background Ectopic pregnancy contributes to maternal morbidity and mortality, especially in low-resourced countries with limited facilities for early diagnosis and treatment. It is a very challenging condition to diagnose. Patients may collapse and die while undergoing investigation. Aims To assess surgical treatment given to patients presenting at Mpilo Central Hospital, the challenges that are faced and the outcomes; and also to document how women survive this dangerous condition in a setting challenged by low resources. Results All the patients had prompt life-saving surgery within 48 h of admission despite the challenges faced. The survival rate was 100% during the period of the study. Conclusion It is possible to prevent maternal mortality in low-resource countries by maintaining basic clinical and surgical skills.

First U.S. near-total human face transplantation: a paradigm shift for massive complex injuries.

PubMed

Siemionow, Maria Z; Papay, Frank; Djohan, Risal; Bernard, Steven; Gordon, Chad R; Alam, Daniel; Hendrickson, Mark; Lohman, Robert; Eghtesad, Bijan; Fung, John

2010-01-01

Severe complex facial injuries are difficult to reconstruct and require multiple surgical procedures. The potential of performing complex craniofacial reconstruction in one surgical procedure is appealing, and composite face allograft transplantation may be considered an alternative option. The authors describe establishment of the Cleveland Clinic face transplantation program that led them to perform the first U.S. near-total face transplantation. In November of 2004, the authors received the world's first institutional review board approval to perform a face transplant in humans. In December of 2008, after a 22-hour operation, the authors performed the first near-total face transplantation in the United States, replacing 80 percent of the patient's traumatic facial deficit with a composite allograft from a brain-dead donor. This largest, and most complex, face allograft in the world included over 535 cm2 of facial skin; functional units of full nose with nasal lining and bony skeleton; lower eyelids and upper lip; underlying muscles and bones, including orbital floor, zygoma, maxilla, alveolus with teeth, hard palate, and parotid glands; and pertinent nerves, arteries, and veins. Immunosuppressive treatment consisted of thymoglobulin, tacrolimus, mycophenolate mofetil, and prednisone. The patient tolerated the procedure and immunosuppression well. At day 47 after transplantation, routine biopsy showed rejection of the graft mucosa without clinical evidence of skin or graft rejection. The patient's physical and psychological recovery went well. The functional outcome has been excellent, including optimal return of breathing through the nose, smelling, tasting, speaking, drinking from a cup, and eating solid foods. The functional outcome thus far at 8 months is rewarding and confirms the feasibility of performing complex reconstruction of severely disfigured patients in a single surgical procedure of facial allotransplantation.

Feminist Composition Pedagogy and the Hypermediated Fractures in the Contact Zone

ERIC Educational Resources Information Center

Blackburn, Jessica

2012-01-01

This article addresses two central research questions: (1) Are there possible detrimental implications to teaching multimodal composition in first-year composition? (2) If so, what is pedagogy's role in mediating these outcomes? Guided by these questions and focused on the responses of eighty seven first-year composition students, a mixed-methods…

Diet of the Antillean manatee (Trichechus manatus manatus) in Belize, Central America

USGS Publications Warehouse

Allen, Aarin Conrad; Beck, Cathy A.; Bonde, Robert K.; Powell, James A.; Gomez, Nicole Auil

2017-01-01

Belize contains important habitat for Antillean manatees (Trichechus manatus manatus) and provides refuge for the highest known population density of this subspecies. As these animals face impending threats, knowledge of their dietary habits can be used to interpret resource utilization. The contents of 13 mouth, 6 digestive tract (stomach, duodenum and colon), and 124 fecal samples were microscopically examined using a modified point technique detection protocol to identify key plant species consumed by manatees at two important aggregation sites in Belize: Southern Lagoon and the Drowned Cayes. Overall, 15 different items were identified in samples from manatees in Belize. Five species of seagrasses (Halodule wrightii, Thalassia testudinum, Ruppia maritima, Syringodium filiforme, and Halophila sp.) made up the highest percentage of items. The red mangrove (Rhizophora mangle), was also identified as an important food item. Algae (Ulva sp., Chara sp., Lyngbya sp.) and invertebrates (sponges and diatoms) were also consumed. Variation in the percentage of seagrasses, other vascular plants, and algae consumption was analyzed as a 4-factor analysis of variance (ANOVA) with main effects and interactions for locality, sex, size classification, and season. While sex and season did not influence diet composition, differences for locality and size classification were observed. These results suggest that analysis of diet composition of Antillean manatees may help to determine critical habitat and use of associated food resources which, in turn can be used to aid conservation efforts in Belize.

Toward a mineral physics reference model for the Moon’s core

PubMed Central

Antonangeli, Daniele; Morard, Guillaume; Schmerr, Nicholas C.; Komabayashi, Tetsuya; Krisch, Michael; Fiquet, Guillaume; Fei, Yingwei

2015-01-01

The physical properties of iron (Fe) at high pressure and high temperature are crucial for understanding the chemical composition, evolution, and dynamics of planetary interiors. Indeed, the inner structures of the telluric planets all share a similar layered nature: a central metallic core composed mostly of iron, surrounded by a silicate mantle, and a thin, chemically differentiated crust. To date, most studies of iron have focused on the hexagonal closed packed (hcp, or ε) phase, as ε-Fe is likely stable across the pressure and temperature conditions of Earth’s core. However, at the more moderate pressures characteristic of the cores of smaller planetary bodies, such as the Moon, Mercury, or Mars, iron takes on a face-centered cubic (fcc, or γ) structure. Here we present compressional and shear wave sound velocity and density measurements of γ-Fe at high pressures and high temperatures, which are needed to develop accurate seismic models of planetary interiors. Our results indicate that the seismic velocities proposed for the Moon’s inner core by a recent reanalysis of Apollo seismic data are well below those of γ-Fe. Our dataset thus provides strong constraints to seismic models of the lunar core and cores of small telluric planets. This allows us to propose a direct compositional and velocity model for the Moon’s core. PMID:25775531

Hemispheric asymmetry in holistic processing of words.

PubMed

Ventura, Paulo; Delgado, João; Ferreira, Miguel; Farinha-Fernandes, António; Guerreiro, José C; Faustino, Bruno; Leite, Isabel; Wong, Alan C-N

2018-05-13

Holistic processing has been regarded as a hallmark of face perception, indicating the automatic and obligatory tendency of the visual system to process all face parts as a perceptual unit rather than in isolation. Studies involving lateralized stimulus presentation suggest that the right hemisphere dominates holistic face processing. Holistic processing can also be shown with other categories such as words and thus it is not specific to faces or face-like expertize. Here, we used divided visual field presentation to investigate the possibly different contributions of the two hemispheres for holistic word processing. Observers performed same/different judgment on the cued parts of two sequentially presented words in the complete composite paradigm. Our data indicate a right hemisphere specialization for holistic word processing. Thus, these markers of expert object recognition are domain general.

Infrared face recognition based on LBP histogram and KW feature selection

NASA Astrophysics Data System (ADS)

Xie, Zhihua

2014-07-01

The conventional LBP-based feature as represented by the local binary pattern (LBP) histogram still has room for performance improvements. This paper focuses on the dimension reduction of LBP micro-patterns and proposes an improved infrared face recognition method based on LBP histogram representation. To extract the local robust features in infrared face images, LBP is chosen to get the composition of micro-patterns of sub-blocks. Based on statistical test theory, Kruskal-Wallis (KW) feature selection method is proposed to get the LBP patterns which are suitable for infrared face recognition. The experimental results show combination of LBP and KW features selection improves the performance of infrared face recognition, the proposed method outperforms the traditional methods based on LBP histogram, discrete cosine transform(DCT) or principal component analysis(PCA).

Rethinking the outpatient medication list: increasing patient activation and education while architecting for centralization and improved medication reconciliation.

PubMed

Pandolfe, Frank; Wright, Adam; Slack, Warner V; Safran, Charles

2018-05-17

Identify barriers impacting the time consuming and error fraught process of medication reconciliation. Design and implement an electronic medication management system where patient and trusted healthcare proxies can participate in establishing and maintaining an inclusive and up-to-date list of medications. A patient-facing electronic medication manager was deployed within an existing research project focused on elder care management funded by the AHRQ, InfoSAGE, allowing patients and patients' proxies the ability to build and maintain an accurate and up-to-date medication list. Free and open-source tools available from the U.S. government were used to embed the tenets of centralization, interoperability, data federation, and patient activation into the design. Using patient-centered design and free, open-source tools, we implemented a web and mobile enabled patient-facing medication manager for complex medication management. Patient and caregiver participation are essential to improve medication safety. Our medication manager is an early step towards a patient-facing medication manager that has been designed with data federation and interoperability in mind.

The role of serotonin in personality inference: tryptophan depletion impairs the identification of neuroticism in the face.

PubMed

Ward, Robert; Sreenivas, Shubha; Read, Judi; Saunders, Kate E A; Rogers, Robert D

2017-07-01

Serotonergic mechanisms mediate the expression of personality traits (such as impulsivity, aggression and anxiety) that are linked to vulnerability to psychological illnesses, and modulate the identification of emotional expressions in the face as well as learning about broader classes of appetitive and aversive signals. Faces with neutral expressions signal a variety of socially relevant information, such that inferences about the big five personality traits, including Neuroticism, Extraversion and Agreeableness, can be accurately made on the basis of emotionally neutral facial photographs. Given the close link between Neuroticism and psychological distress, we investigated the effects of diminished central serotonin activity (achieved by tryptophan depletion) upon the accuracy of 52 healthy (non-clinical) adults' discriminations of personality from facial characteristics. All participants were able to discriminate reliably four of the big five traits. However, the tryptophan-depleted participants were specifically less accurate in discriminating Neuroticism than the matched non-depleted participants. These data suggest that central serotonin activity modulates the identification of not only negative facial emotional expression but also a broader class of signals about personality characteristics linked to psychological distress.

A Geographic Glimpse of Central Texas and the Borderlands: Images and Encounters. Pathways in Geography Resource Publication No. 12.

ERIC Educational Resources Information Center

Petersen, James F., Ed.; Tuason, Julie A., Ed.

This guide seeks to provide a closer look at the diversity found within central Texas and the borderlands and offers a good general background to understanding some of the challenges facing the region. The book is divided into two parts with articles and lesson plans written by several authors. Part 1, "Views and Viewpoints," includes:…

Impact of parking supply and demand management on central business district (CBD) traffic congestion, transit performance measures and sustainable land use : a study of the impact of parking supply and demand management.

DOT National Transportation Integrated Search

2012-07-01

Parking is one of the thorniest problems facing local officials who wish to maintain the vitality of central business districts (CBD). Viewed in isolation, the solution often is seen as more parking, at least, and more free parking, if possible. But ...

Reduced beta connectivity during emotional face processing in adolescents with autism.

PubMed

Leung, Rachel C; Ye, Annette X; Wong, Simeon M; Taylor, Margot J; Doesburg, Sam M

2014-01-01

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by impairments in social cognition. The biological basis of deficits in social cognition in ASD, and their difficulty in processing emotional face information in particular, remains unclear. Atypical communication within and between brain regions has been reported in ASD. Interregional phase-locking is a neurophysiological mechanism mediating communication among brain areas and is understood to support cognitive functions. In the present study we investigated interregional magnetoencephalographic phase synchronization during the perception of emotional faces in adolescents with ASD. A total of 22 adolescents with ASD (18 males, mean age =14.2 ± 1.15 years, 22 right-handed) with mild to no cognitive delay and 17 healthy controls (14 males, mean age =14.4 ± 0.33 years, 16 right-handed) performed an implicit emotional processing task requiring perception of happy, angry and neutral faces while we recorded neuromagnetic signals. The faces were presented rapidly (80 ms duration) to the left or right of a central fixation cross and participants responded to a scrambled pattern that was presented concurrently on the opposite side of the fixation point. Task-dependent interregional phase-locking was calculated among source-resolved brain regions. Task-dependent increases in interregional beta synchronization were observed. Beta-band interregional phase-locking in adolescents with ASD was reduced, relative to controls, during the perception of angry faces in a distributed network involving the right fusiform gyrus and insula. No significant group differences were found for happy or neutral faces, or other analyzed frequency ranges. Significant reductions in task-dependent beta connectivity strength, clustering and eigenvector centrality (all P <0.001) in the right insula were found in adolescents with ASD, relative to controls. Reduced beta synchronization may reflect inadequate recruitment of task-relevant networks during emotional face processing in ASD. The right insula, specifically, was a hub of reduced functional connectivity and may play a prominent role in the inability to effectively extract emotional information from faces. These findings suggest that functional disconnection in brain networks mediating emotional processes may contribute to deficits in social cognition in this population.

Lateralized hybrid faces: evidence of a valence-specific bias in the processing of implicit emotions.

PubMed

Prete, Giulia; Laeng, Bruno; Tommasi, Luca

2014-01-01

It is well known that hemispheric asymmetries exist for both the analyses of low-level visual information (such as spatial frequency) and high-level visual information (such as emotional expressions). In this study, we assessed which of the above factors underlies perceptual laterality effects with "hybrid faces": a type of stimulus that allows testing for unaware processing of emotional expressions, when the emotion is displayed in the low-frequency information while an image of the same face with a neutral expression is superimposed to it. Despite hybrid faces being perceived as neutral, the emotional information modulates observers' social judgements. In the present study, participants were asked to assess friendliness of hybrid faces displayed tachistoscopically, either centrally or laterally to fixation. We found a clear influence of the hidden emotions also with lateral presentations. Happy faces were rated as more friendly and angry faces as less friendly with respect to neutral faces. In general, hybrid faces were evaluated as less friendly when they were presented in the left visual field/right hemisphere than in the right visual field/left hemisphere. The results extend the validity of the valence hypothesis in the specific domain of unaware (subcortical) emotion processing.

Spatial location in brief, free-viewing face encoding modulates contextual face recognition

PubMed Central

Felisberti, Fatima M.; McDermott, Mark R.

2013-01-01

The effect of the spatial location of faces in the visual field during brief, free-viewing encoding in subsequent face recognition is not known. This study addressed this question by tagging three groups of faces with cheating, cooperating or neutral behaviours and presenting them for encoding in two visual hemifields (upper vs. lower or left vs. right). Participants then had to indicate if a centrally presented face had been seen before or not. Head and eye movements were free in all phases. Findings showed that the overall recognition of cooperators was significantly better than cheaters, and it was better for faces encoded in the upper hemifield than in the lower hemifield, both in terms of a higher d′ and faster reaction time (RT). The d′ for any given behaviour in the left and right hemifields was similar. The RT in the left hemifield did not vary with tagged behaviour, whereas the RT in the right hemifield was longer for cheaters than for cooperators. The results showed that memory biases in contextual face recognition were modulated by the spatial location of briefly encoded faces and are discussed in terms of scanning reading habits, top-left bias in lighting preference and peripersonal space. PMID:24349694

Forty-two years of change in an old-growth and second-growth beech-maple forest of north central Ohio

Treesearch

Natalie R. Pinheiro; P. Charles Goebel; David M. Hix

2008-01-01

Using data collected in 1964 and 2006, we examined changes in the composition and structure of a second-growth and old-growth beech-maple forest of Crall Woods, located in Ashland County of north central Ohio. Over the 42 years, the old-growth forest (estimated to be at least 250 years old) experienced a significant shift in species composition as American beech,...

Central Appalachian basin natural gas database: distribution, composition, and origin of natural gases

USGS Publications Warehouse

Román Colón, Yomayra A.; Ruppert, Leslie F.

2015-01-01

The U.S. Geological Survey (USGS) has compiled a database consisting of three worksheets of central Appalachian basin natural gas analyses and isotopic compositions from published and unpublished sources of 1,282 gas samples from Kentucky, Maryland, New York, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The database includes field and reservoir names, well and State identification number, selected geologic reservoir properties, and the composition of natural gases (methane; ethane; propane; butane, iso-butane [i-butane]; normal butane [n-butane]; iso-pentane [i-pentane]; normal pentane [n-pentane]; cyclohexane, and hexanes). In the first worksheet, location and American Petroleum Institute (API) numbers from public or published sources are provided for 1,231 of the 1,282 gas samples. A second worksheet of 186 gas samples was compiled from published sources and augmented with public location information and contains carbon, hydrogen, and nitrogen isotopic measurements of natural gas. The third worksheet is a key for all abbreviations in the database. The database can be used to better constrain the stratigraphic distribution, composition, and origin of natural gas in the central Appalachian basin.

The placenta of the salp (Tunicata: Thaliacea).

PubMed

Bone, Q; Pulsford, A L; Amoroso, E C

1985-01-01

The morphology of the mature 'placenta' of the pelagic tunicate Salpa fusiformis is described, and it is shown that two syncytial layers, intimately connected by interdigitating microvilli, separate maternal and embryonic circulations. The central placental layer facing the maternal circulation is bordered by membrane infoldings; the cortical layer facing the embryonic circulation is bordered by extensively branching microvilli. Both layers are of maternal origin, although embryonic leucocytes pass into, and add to, the cortical layer.

Language as Description, Indication, and Depiction.

PubMed

Ferrara, Lindsay; Hodge, Gabrielle

2018-01-01

Signers and speakers coordinate a broad range of intentionally expressive actions within the spatiotemporal context of their face-to-face interactions (Parmentier, 1994; Clark, 1996; Johnston, 1996; Kendon, 2004). Varied semiotic repertoires combine in different ways, the details of which are rooted in the interactions occurring in a specific time and place (Goodwin, 2000; Kusters et al., 2017). However, intense focus in linguistics on conventionalized symbolic form/meaning pairings (especially those which are arbitrary) has obscured the importance of other semiotics in face-to-face communication. A consequence is that the communicative practices resulting from diverse ways of being (e.g., deaf, hearing) are not easily united into a global theoretical framework. Here we promote a theory of language that accounts for how diverse humans coordinate their semiotic repertoires in face-to-face communication, bringing together evidence from anthropology, semiotics, gesture studies and linguistics. Our aim is to facilitate direct comparison of different communicative ecologies. We build on Clark's (1996) theory of language use as 'actioned' via three methods of signaling: describing, indicating, and depicting. Each method is fundamentally different to the other, and they can be used alone or in combination with others during the joint creation of multimodal 'composite utterances' (Enfield, 2009). We argue that a theory of language must be able to account for all three methods of signaling as they manifest within and across composite utterances. From this perspective, language-and not only language use-can be viewed as intentionally communicative action involving the specific range of semiotic resources available in situated human interactions.

Language as Description, Indication, and Depiction

PubMed Central

Ferrara, Lindsay; Hodge, Gabrielle

2018-01-01

Signers and speakers coordinate a broad range of intentionally expressive actions within the spatiotemporal context of their face-to-face interactions (Parmentier, 1994; Clark, 1996; Johnston, 1996; Kendon, 2004). Varied semiotic repertoires combine in different ways, the details of which are rooted in the interactions occurring in a specific time and place (Goodwin, 2000; Kusters et al., 2017). However, intense focus in linguistics on conventionalized symbolic form/meaning pairings (especially those which are arbitrary) has obscured the importance of other semiotics in face-to-face communication. A consequence is that the communicative practices resulting from diverse ways of being (e.g., deaf, hearing) are not easily united into a global theoretical framework. Here we promote a theory of language that accounts for how diverse humans coordinate their semiotic repertoires in face-to-face communication, bringing together evidence from anthropology, semiotics, gesture studies and linguistics. Our aim is to facilitate direct comparison of different communicative ecologies. We build on Clark’s (1996) theory of language use as ‘actioned’ via three methods of signaling: describing, indicating, and depicting. Each method is fundamentally different to the other, and they can be used alone or in combination with others during the joint creation of multimodal ‘composite utterances’ (Enfield, 2009). We argue that a theory of language must be able to account for all three methods of signaling as they manifest within and across composite utterances. From this perspective, language—and not only language use—can be viewed as intentionally communicative action involving the specific range of semiotic resources available in situated human interactions. PMID:29875712

Increased Substance Use and Risky Sexual Behavior among Migratory Homeless Youth: Exploring the Role of Social Network Composition

ERIC Educational Resources Information Center

Martino, Steven C.; Tucker, Joan S.; Ryan, Gery; Wenzel, Suzanne L.; Golinelli, Daniela; Munjas, Brett

2011-01-01

Travelers are a migratory subgroup of homeless youth who may be especially prone to engaging in risky behavior. This study compared the substance use and sexual behavior of young homeless travelers and non-travelers to evaluate the extent and possible sources of travelers' increased risk. Data came from face-to-face interviews with 419 homeless…

Combinatorial Interdependence in Lottery

ERIC Educational Resources Information Center

Helman, Danny

2005-01-01

This paper examines a real life question of gamble facing lottery players. Combinatorial dependence plays a central role in shaping the game probabilistic structure, but might not carry the merited weight in punters' considerations.

Canopy light heterogeneity drives leaf anatomical, eco-physiological, and photosynthetic changes in olive trees grown in a high-density plantation.

PubMed

Larbi, Ajmi; Vázquez, Saúl; El-Jendoubi, Hamdi; Msallem, Monji; Abadía, Javier; Abadía, Anunciación; Morales, Fermín

2015-02-01

In the field, leaves may face very different light intensities within the tree canopy. Leaves usually respond with light-induced morphological and photosynthetic changes, in a phenomenon known as phenotypic plasticity. Canopy light distribution, leaf anatomy, gas exchange, chlorophyll fluorescence, and pigment composition were investigated in an olive (Olea europaea, cvs. Arbequina and Arbosana) orchard planted with a high-density system (1,250 trees ha(-1)). Sampling was made from three canopy zones: a lower canopy (<1 m), a central one (1-2 m), and an upper one (>2 m). Light interception decreased significantly in the lower canopy when compared to the central and top ones. Leaf angle increased and photosynthetic rates and non-photochemical quenching (NPQ) decreased significantly and progressively from the upper canopy to the central and the lower canopies. The largest leaf areas were found in the lower canopy, especially in the cultivar Arbequina. The palisade and spongy parenchyma were reduced in thickness in the lower canopy when compared to the upper one, in the former due to a decrease in the number of cell layers from three to two (clearly distinguishable in the light and fluorescence microscopy images). In both cultivars, the concentration of violaxanthin-cycle pigments and β-carotene was higher in the upper than in the lower canopy. Furthermore, the de-epoxidized forms zeaxanthin and antheraxanthin increased significantly in those leaves from the upper canopy, in parallel to the NPQ increases. In conclusion, olive leaves react with morphological and photosynthetic changes to within-crown light gradients. These results strengthen the idea of olive trees as "modular organisms" that adjust the modules morphology and physiology in response to light intensity.

VEST: An Aspect-Based Composition Tool for Real-Time Systems

DTIC Science & Technology

2003-01-01

VEST: An Aspect-Based Composition Tool for Real - Time Systems * John A. Stankovic Ruiqing Zhu Ram Poornalingam Chenyang Lu Zhendong Yu Marty Humphrey...Composition Tool for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...it is obvious that designers of embedded real - time systems face many difficult problems. By working through various product scenarios with avionics

Eye Gaze during Observation of Static Faces in Deaf People

PubMed Central

Watanabe, Katsumi; Matsuda, Tetsuya; Nishioka, Tomoyuki; Namatame, Miki

2011-01-01

Knowing where people look when viewing faces provides an objective measure into the part of information entering the visual system as well as into the cognitive strategy involved in facial perception. In the present study, we recorded the eye movements of 20 congenitally deaf (10 male and 10 female) and 23 (11 male and 12 female) normal-hearing Japanese participants while they evaluated the emotional valence of static face stimuli. While no difference was found in the evaluation scores, the eye movements during facial observations differed among participant groups. The deaf group looked at the eyes more frequently and for longer duration than the nose whereas the hearing group focused on the nose (or the central region of face) more than the eyes. These results suggest that the strategy employed to extract visual information when viewing static faces may differ between deaf and hearing people. PMID:21359223

LOCATING AND CHARACTERIZING ANGIOID STREAKS WITH EN FACE OPTICAL COHERENCE TOMOGRAPHY.

PubMed

Hanhart, Joel; Greifner, Hillel; Rozenman, Yaakov

2017-01-01

To characterize angioid streaks (AS) with en face optical coherence tomography (OCT). Case report of a patient with myopia presenting with choroidal neovascularization secondary to AS. Swept-source en face OCT ability to image the streaks was compared with spectral-domain and swept-source B-scans as well as color and red-free pictures. A 48-year-old man with myopia presented with sudden central visual loss. Choroidal neovascularization secondary to AS was diagnosed and intraocular anti-vascular endothelial growth factor given with clinical and OCT features improvement. Angioid streaks were visualized as less dark than the overlying retinal and the underlying choroidal vasculature. En face OCT located the changes at the level of Bruch membrane. An AS was found to be interrupted by the choroidal neovascularization, what was not captured by other modalities. En face OCT allows to assess the extent of changes in Bruch membrane and their spatial relationship to choroidal neovascularization.

The North Central Forest Inventory and Analysis timber product output database--a regional composite approach.

Treesearch

Dennis M. May

1998-01-01

Discusses a regional composite approach to managing timber product output data in a relational database. Describes the development and structure of the regional composite database and demonstrates its use in addressing everyday timber product output information needs.

Facial biases on vocal perception and memory.

PubMed

Boltz, Marilyn G

2017-06-01

Does a speaker's face influence the way their voice is heard and later remembered? This question was addressed through two experiments where in each, participants listened to middle-aged voices accompanied by faces that were either age-appropriate, younger or older than the voice or, as a control, no face at all. In Experiment 1, participants evaluated each voice on various acoustical dimensions and speaker characteristics. The results showed that facial displays influenced perception such that the same voice was heard differently depending on the age of the accompanying face. Experiment 2 further revealed that facial displays led to memory distortions that were age-congruent in nature. These findings illustrate that faces can activate certain social categories and preconceived stereotypes that then influence vocal and person perception in a corresponding fashion. Processes of face/voice integration are very similar to those of music/film, indicating that the two areas can mutually inform one another and perhaps, more generally, reflect a centralized mechanism of cross-sensory integration. Copyright © 2017 Elsevier B.V. All rights reserved.

Com"position": Ecocomposition, Aristotle, and the First-Year Writing Course

ERIC Educational Resources Information Center

Moe, Peter Wayne

2011-01-01

I see a parallel between the illiteracy I witnessed while working in the court system and the challenges facing first-year writers at the university. In both cases, problems arise due to unfamiliarity with the discourse community into which one enters. In response, because much of the language governing composition and rhetoric is rife with place…

Pre-harvest (1994-1995) Conditions of the Missouri Ozark Forest Ecosystem Project Small Mammal Communities

Treesearch

Debby K. Fantz; Rochelle B. Renken

1997-01-01

We conducted a capture-recapture study on northeast-facing slopes to determine the pre-treatment landscape-scale effect of even- and uneven-aged silvicultural treatments upon the species composition, species richness, and relative abundance of small mammals on Missouri Ozark Forest Ecosystem Project (MOFEP) sites. Similarity indices of species composition between sites...

Impaired neural processing of dynamic faces in left-onset Parkinson's disease.

PubMed

Garrido-Vásquez, Patricia; Pell, Marc D; Paulmann, Silke; Sehm, Bernhard; Kotz, Sonja A

2016-02-01

Parkinson's disease (PD) affects patients beyond the motor domain. According to previous evidence, one mechanism that may be impaired in the disease is face processing. However, few studies have investigated this process at the neural level in PD. Moreover, research using dynamic facial displays rather than static pictures is scarce, but highly warranted due to the higher ecological validity of dynamic stimuli. In the present study we aimed to investigate how PD patients process emotional and non-emotional dynamic face stimuli at the neural level using event-related potentials. Since the literature has revealed a predominantly right-lateralized network for dynamic face processing, we divided the group into patients with left (LPD) and right (RPD) motor symptom onset (right versus left cerebral hemisphere predominantly affected, respectively). Participants watched short video clips of happy, angry, and neutral expressions and engaged in a shallow gender decision task in order to avoid confounds of task difficulty in the data. In line with our expectations, the LPD group showed significant face processing deficits compared to controls. While there were no group differences in early, sensory-driven processing (fronto-central N1 and posterior P1), the vertex positive potential, which is considered the fronto-central counterpart of the face-specific posterior N170 component, had a reduced amplitude and delayed latency in the LPD group. This may indicate disturbances of structural face processing in LPD. Furthermore, the effect was independent of the emotional content of the videos. In contrast, static facial identity recognition performance in LPD was not significantly different from controls, and comprehensive testing of cognitive functions did not reveal any deficits in this group. We therefore conclude that PD, and more specifically the predominant right-hemispheric affection in left-onset PD, is associated with impaired processing of dynamic facial expressions, which could be one of the mechanisms behind the often reported problems of PD patients in their social lives. Copyright © 2016 Elsevier Ltd. All rights reserved.

Forensic face recognition as a means to determine strength of evidence: A survey.

PubMed

Zeinstra, C G; Meuwly, D; Ruifrok, A Cc; Veldhuis, R Nj; Spreeuwers, L J

2018-01-01

This paper surveys the literature on forensic face recognition (FFR), with a particular focus on the strength of evidence as used in a court of law. FFR is the use of biometric face recognition for several applications in forensic science. It includes scenarios of ID verification and open-set identification, investigation and intelligence, and evaluation of the strength of evidence. We present FFR from operational, tactical, and strategic perspectives. We discuss criticism of FFR and we provide an overview of research efforts from multiple perspectives that relate to the domain of FFR. Finally, we sketch possible future directions for FFR. Copyright © 2018 Central Police University.

Variability in CNR1 locus influences protein intake and smoking status in the Central-European population.

PubMed

Bienertova-Vasku, Julie; Bienert, Petr; Slovackova, Lenka; Sablikova, Lenka; Piskackova, Zlata; Forejt, Martin; Splichal, Zbynek; Zlamal, Filip; Vasku, Anna

2012-07-01

The endocannabinoid receptor 1 (CB1) is encoded by the CNR1 gene and has been recently recognized to play an important role in the regulation of satiety and feeding behaviour with a huge potential of modulating metabolic response and feeding control. The aim of the study was to investigate the potential of three selected single nucleotide polymorphisms (SNPs) in the CNR1 locus on native dietary composition in the Central-European Caucasian population. A total of 258 unrelated individuals originating from the Central-European Caucasian population were enrolled into the study and rs1049353, rs12720071, and rs806368 polymorphisms in CNR1 locus were examined in these individuals using PCR-based methodology. Body composition was assessed using a bioimpedance method, various anthropometric parameters were investigated (waist and hip circumference, skin folds), and native dietary composition was analysed using 7-day food records as well as a food frequency questionnaire. Allelic variations and common haplotypes in the CNR1 gene were associated with the daily intake of proteins, fluids, and fibre, regardless of the physical activity of the individuals. The common haplotype in the CNR1 gene was associated with self-reported smoking (number of cigarettes per day, smoking years). Our results indicate that specific genetic variations in the CNR1 gene may act as susceptibility markers for specific dietary composition in the Central-European population.

Atypical clinical appearance of eosinophilic pustular folliculitis of seborrheic areas of the face.

PubMed

Matsumura, Yumi; Miyachi, Yoshiki

2012-01-01

Eosinophilic pustular folliculitis is a pruritic eruption that preferentially involves the face. It is characterized by well-demarcated erythema, extending peripherally with a central clearing and pigmentation, together with sterile pustules lining the periphery. We describe five cases of eosinophilic pustular folliculitis with pruritic papules and erythema on seborrheic areas of the face, which lacked the typical features of classic eosinophilic pustular folliculitis--pustules and peripheral extension--but showed eosinophilic infiltration of the hair follicles, histologically. The eruption quickly responded to oral indomethacin except for one case that responded to tranilast and one case that was associated with acquired immunodeficiency syndrome, with recurrences in defined areas of the face. Our findings in these cases suggest that eosinophilic pustular folliculitis may vary in clinical appearance.

The School of Public Safety at Valencia College: Visioning and Implementation of a College-Wide Distributive and Collaborative Program Model for the Central Florida Community

ERIC Educational Resources Information Center

Goltz, Jeffrey W.

2016-01-01

The central Florida region, faced with record tourism, a large service population, and significant population growth over the next few decades, must rely on a community-based institution of higher education with lifelong learning offerings, a local community college, to create world class public safety education and training for the region.…

Access to Education for the Poor in Europe and Central Asia: Preliminary Evidence and Policy Implications. World Bank Technical Paper No. 511.

ERIC Educational Resources Information Center

Vandycke, Nancy

In Europe and Central Asia, the poor face three problems: (1) the education system as a whole does not work well, and hence fails to meet their needs; (2) the private cost of education has risen, so that "education," as a commodity, competes with other consumption goods in shrinking household budgets; and (3) the perceived benefits of…

GEODATA: Information System Based on Geospatial for Early Warning Tracking and Analysis Agricultural Plant Diseases in Central Java

NASA Astrophysics Data System (ADS)

Prasetyo, S. Y. J.; Agus, Y. H.; Dewi, C.; Simanjuntak, B. H.; Hartomo, K. D.

2017-03-01

The Government of Indonesia is currently faced with the problems of food, especially rice. It needs in large numbers that have to import from neighboring countries. Actually, the Indonesian government has the ability to produce rice to meet national needs but is still faced with the problem of pest attack rice annually increasing extent. One of the factors is that geographically Indonesia located on the migration path of world rice insect pests (called BPH or Brown Planthoppers) (Nilaparvata lugens Stal.) It leads endemic status annually. One proposed strategy to be applied is to use an early warning system based on a specific region of the main pest population. The proposed information system called GEODATA. GEODATA is Geospatial Outbreak of Disease Tracking and Analysis. The system works using a library ESSA (Exponential Smoothing - Spatial Autocorrelation) developed in previous studies in Satya Wacana Christian University. GEODATA built to meet the qualifications required surveillance device by BMKG (Indonesian Agency of Meteorology, Climatology and Geophysics’ Central Java Provinces), BPTPH (Indonesian Agency of Plant Protection and Horticulture) Central Java Provinces, BKP-KP District Boyolali, Central Java, (Indonesian Agency of Food Security and Agriculture Field Supervisor, District Boyolali, Central Java Provinces) and farmer groups. GIS GEODATA meets the needs of surveillance devices that include: (1) mapping of the disease, (2) analysis of the dynamics of the disease, and (3) prediction of attacks / disease outbreaks in a particular region. GIS GEODATA is currently under implementation in the laboratory field observations of plant pest in Central Java province, Indonesia.

VIEW OF THE SOUTH AND WEST SIDES OF BUILDING 63, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF THE SOUTH AND WEST SIDES OF BUILDING 63, FACING NORTHEAST. - Naval Computer & Telecommunications Area Station, Enlisted Men's Barracks, West corner of Central Street & Midway Drive, Wahiawa, Honolulu County, HI

VIEW OF THE EAST AND NORTH SIDES OF BUILDING 63, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF THE EAST AND NORTH SIDES OF BUILDING 63, FACING SOUTHWEST. - Naval Computer & Telecommunications Area Station, Enlisted Men's Barracks, West corner of Central Street & Midway Drive, Wahiawa, Honolulu County, HI

Changes in personal networks of women in residential and outpatient substance abuse treatment.

PubMed

Min, Meeyoung O; Tracy, Elizabeth M; Kim, Hyunsoo; Park, Hyunyong; Jun, Minkyoung; Brown, Suzanne; McCarty, Christopher; Laudet, Alexandre

2013-10-01

Changes in personal network composition, support and structure over 12 months were examined in 377 women from residential (n=119) and intensive outpatient substance abuse treatment (n=258) through face-to-face interviews utilizing computer based data collection. Personal networks of women who entered residential treatment had more substance users, more people with whom they had used alcohol and/or drugs, and fewer people from treatment programs or self- help groups than personal networks of women who entered intensive outpatient treatment. By 12 months post treatment intake, network composition improved for women in residential treatment; however, concrete support was still lower and substance users are still more prevalent in their networks. Network composition of women in outpatient treatment remained largely the same over time. Both groups increased cohesiveness within the network over 12 months. Targeting interventions that support positive changes in personal networks may heighten positive long term outcomes for women entering treatment. Copyright © 2013 Elsevier Inc. All rights reserved.

New perspectives in face correlation: discrimination enhancement in face recognition based on iterative algorithm

NASA Astrophysics Data System (ADS)

Wang, Q.; Alfalou, A.; Brosseau, C.

2016-04-01

Here, we report a brief review on the recent developments of correlation algorithms. Several implementation schemes and specific applications proposed in recent years are also given to illustrate powerful applications of these methods. Following a discussion and comparison of the implementation of these schemes, we believe that all-numerical implementation is the most practical choice for application of the correlation method because the advantages of optical processing cannot compensate the technical and/or financial cost needed for an optical implementation platform. We also present a simple iterative algorithm to optimize the training images of composite correlation filters. By making use of three or four iterations, the peak-to-correlation energy (PCE) value of correlation plane can be significantly enhanced. A simulation test using the Pointing Head Pose Image Database (PHPID) illustrates the effectiveness of this statement. Our method can be applied in many composite filters based on linear composition of training images as an optimization means.

Lightweight, Rack-Mountable Composite Cold Plate/Shelves

NASA Technical Reports Server (NTRS)

Hurlbert, Kathryn M.; Ruemmele, Warren; Nguyen, Hai D.; Andish, Kambiz; McCalley, Sean

2004-01-01

Rack-mountable composite-material structural components that would serve as both shelves and cold plates for removing heat from electronic or other equipment mounted on the shelves have been proposed as lightweight alternatives to all-metal cold plate/shelves now in use. A proposed cold plate/shelf would include a highly thermally conductive face sheet containing oriented graphite fibers bonded to an aluminum honeycomb core, plus an extruded stainless-steel substructure containing optimized flow passages for a cooling fluid, and an inlet and outlet that could be connected to standard manifold sections. To maximize heat-transfer efficiency, the extruded stainless-steel substructure would be connected directly to the face sheet. On the basis of a tentative design, the proposed composite cold plate/shelf would weigh about 38 percent less than does an all-aluminum cold plate in use or planned for use in some spacecraft and possibly aircraft. Although weight is a primary consideration, the tentative design offers the additional benefit of reduction of thickness to half that of the all-aluminum version.

Event-Related Potential Responses to Beloved and Familiar Faces in Different Marriage Styles: Evidence from Mosuo Subjects.

PubMed

Wu, Haiyan; Luo, Li; Dai, Junqiang; Yang, Suyong; Wang, Naiyi; Luo, Yue-Jia

2016-01-01

Research on familiar face recognition has largely focused on the neural correlates of recognizing a beloved partner or family member. However, no research has explored the effect of marriage style on the recognition of a beloved partner's face, especially in matriarchal societies. Here, we examined the time course of event-related potentials (ERP) in response to the face of a beloved partner, sibling, or unknown person in a sample of individuals from the matriarchal Mosuo tribe. Two groups were assessed: intermarriage and walking marriage groups (i.e., couples in a committed relationship who do not cohabitate during the daytime). In agreement with previous reports, ERP results revealed more positive VPP, N250, and P300 waveforms for beloved faces than sibling faces in both groups. Moreover, P300 was more positive for beloved partner versus sibling faces; however, this difference emerged at fronto-central sites for the walking marriage group and at posterior sites for the intermarriage group. Overall, we observed that marriage style affects the later stage processing of a beloved partner's face, and this may be associated with greater affective arousal and familiarity.

Is cognitive behavioural therapy effective in reducing suicidal ideation and behaviour when delivered face-to-face or via e-health? A systematic review and meta-analysis.

PubMed

Leavey, Katie; Hawkins, Russell

2017-09-01

Cognitive Behavioural Therapy (CBT) is a widely used psychotherapeutic intervention for suicide prevention despite its efficacy for suicide prevention in adults remaining ambiguous. Reluctance or inability to access face-to-face help suggests that e-health delivery may be a valuable resource for suicidal people. The aim of this study was to systematically review and conduct meta-analysis on research assessing the efficacy of CBT delivered via face-to-face and e-health for suicidal ideation and behaviour. A comprehensive literature search of MEDLINE, PsycINFO, Scopus, PubMed and The Cochrane Central Register of Controlled Trials was conducted. From 764 identified articles, 26 met the inclusion criteria for investigating CBT for suicidal ideation and behaviours in adult populations. Data were extracted on study characteristics and meta-analysis was performed where possible. There was a statistically significant, small to medium effect for face-to-face delivered CBT in reducing suicidal ideation and behaviour although there was significant heterogeneity between the included studies. CBT delivered via e-health was not found to be efficacious for reducing suicidal ideation and behaviour in adults though the number of studies reviewed was small.

Event-Related Potential Responses to Beloved and Familiar Faces in Different Marriage Styles: Evidence from Mosuo Subjects

PubMed Central

Wu, Haiyan; Luo, Li; Dai, Junqiang; Yang, Suyong; Wang, Naiyi; Luo, Yue-jia

2016-01-01

Research on familiar face recognition has largely focused on the neural correlates of recognizing a beloved partner or family member. However, no research has explored the effect of marriage style on the recognition of a beloved partner’s face, especially in matriarchal societies. Here, we examined the time course of event-related potentials (ERP) in response to the face of a beloved partner, sibling, or unknown person in a sample of individuals from the matriarchal Mosuo tribe. Two groups were assessed: intermarriage and walking marriage groups (i.e., couples in a committed relationship who do not cohabitate during the daytime). In agreement with previous reports, ERP results revealed more positive VPP, N250, and P300 waveforms for beloved faces than sibling faces in both groups. Moreover, P300 was more positive for beloved partner versus sibling faces; however, this difference emerged at fronto-central sites for the walking marriage group and at posterior sites for the intermarriage group. Overall, we observed that marriage style affects the later stage processing of a beloved partner’s face, and this may be associated with greater affective arousal and familiarity. PMID:26925002

Testing and evaluation of a slot and tab construction technique for light-weight wood-fiber-based structural panels under bending

Treesearch

Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

2015-01-01

This paper presented construction and strain distributions for light-weight wood-fiber-based structural panels with tri-grid core made from phenolic impregnated laminated paper composites under bending. A new fastening configuration of slots in the faces and tabs on the core was applied to the face/core interfaces of the sandwich panel in addition to epoxy resin. Both...

Versatility of Subscapular Chimeric Free Flaps in the Secondary Reconstruction of Composite Posttraumatic Defects of the Upper Face

PubMed Central

Stalder, Mark Winston; Wise, Matthew Whitten; Dupin, Charles L.; St Hilaire, Hugo

2014-01-01

High energy injuries to the upper face present challenging reconstructive problems. In some cases, initial reconstructive efforts result in unfavorable outcomes that require secondary intervention. Chimeric free flaps based on the subscapular system offer the tissue components and volume needed for these complex reconstructions. This is a series of five patients who underwent secondary reconstruction of the middle and upper face following traumatic injury. Mechanism of injury, prior attempts at reconstruction, and characteristics of the tissue defects and the flaps used in their reconstruction are described. Two patients were female and three were male. Three injuries resulted from gunshot wounds, and two from motor vehicle accidents. All patients had multiple prior failed attempts at reconstruction using local/regional tissue. Defects included symptomatic oronasal or oro-orbital fistulas, enophthalmos, and forehead contour deformities. Two of the flaps used included scapular bone and latissimus muscular components, and three included scapular bone and thoracodorsal artery perforator-based skin paddle components. All free tissue transfers were successful, and no patients suffered significant complications. Chimeric free flaps based on the subscapular system offer a valuable secondary strategy for reconstruction of composite defects of the upper face when other options have been exhausted through previous efforts. PMID:25709752

Late Mesozoic-Cenozoic intraplate magmatism in Central Asia and its relation with mantle diapirism: Evidence from the South Khangai volcanic region, Mongolia

NASA Astrophysics Data System (ADS)

Yarmolyuk, Vladimir V.; Kudryashova, Ekaterina A.; Kozlovsky, Alexander M.; Lebedev, Vladimir A.; Savatenkov, Valery M.

2015-11-01

The South Khangai volcanic region (SKVR) comprises fields of Late Mesozoic-Cenozoic volcanic rocks scattered over southern and central Mongolia. Evolution of the region from the Late Jurassic to the Late Cenozoic includes 13 successive igneous episodes that are more or less evenly distributed in time. Major patterns in the distribution of different-aged volcanic complexes were controlled by a systematic temporal migration of volcanic centers over the region. The total length of their trajectory exceeds 1600 km. Principle characteristics of local magmatism are determined. The composition of igneous rocks varies from basanites to rhyolites (predominantly, high-K rocks), with geochemistry close to that of OIB. The rock composition, however, underwent transformations in the Mesozoic-Cenozoic. Rejuvenation of mafic rocks is accompanied by decrease in the contents of HREE and increase of Nb and Ta. According to isotope data, the SKVR magmatic melts were derived from three isotope sources that differed in the Sr, Nd, and Pb isotopic compositions and successively alternated in time. In the Early Cretaceous, the predominant source composition was controlled by interaction of the EMII- and PREMA-type mantle materials. The PREMA-type mantle material dominated quantitatively in the Late Cretaceous and initial Early Cenozoic. From the latest Early Cenozoic to Late Cenozoic, the magma source also contained the EMI-type material along with the PREMA-type. The structural fabric, rock composition, major evolutionary pattern, and inner structure of SKVR generally comply with the criteria used to distinguish the mantle plume-related regions. Analogous features can be seen in other regions of recent volcanism in Central Asia (South Baikal, Udokan, Vitim, and Tok Stanovik). The structural autonomy of these regions suggests that distribution of the Late Mesozoic-Cenozoic volcanism in Central Asia was controlled by a group of relatively small hot finger-type mantle plumes associated with the common hot mantle field of Central Asia.

Holistic face perception is modulated by experience-dependent perceptual grouping.

PubMed

Curby, Kim M; Entenman, Robert J; Fleming, Justin T

2016-07-01

What role do general-purpose, experience-sensitive perceptual mechanisms play in producing characteristic features of face perception? We previously demonstrated that different-colored, misaligned framing backgrounds, designed to disrupt perceptual grouping of face parts appearing upon them, disrupt holistic face perception. In the current experiments, a similar part-judgment task with composite faces was performed: face parts appeared in either misaligned, different-colored rectangles or aligned, same-colored rectangles. To investigate whether experience can shape impacts of perceptual grouping on holistic face perception, a pre-task fostered the perception of either (a) the misaligned, differently colored rectangle frames as parts of a single, multicolored polygon or (b) the aligned, same-colored rectangle frames as a single square shape. Faces appearing in the misaligned, differently colored rectangles were processed more holistically by those in the polygon-, compared with the square-, pre-task group. Holistic effects for faces appearing in aligned, same-colored rectangles showed the opposite pattern. Experiment 2, which included a pre-task condition fostering the perception of the aligned, same-colored frames as pairs of independent rectangles, provided converging evidence that experience can modulate impacts of perceptual grouping on holistic face perception. These results are surprising given the proposed impenetrability of holistic face perception and provide insights into the elusive mechanisms underlying holistic perception.

Unconscious Evaluation of Faces on Social Dimensions

PubMed Central

Stewart, Lorna H.; Ajina, Sara; Getov, Spas; Bahrami, Bahador; Todorov, Alexander; Rees, Geraint

2012-01-01

It has been proposed that two major axes, dominance and trustworthiness, characterize the social dimensions of face evaluation. Whether evaluation of faces on these social dimensions is restricted to conscious appraisal or happens at a preconscious level is unknown. Here we provide behavioral evidence that such preconscious evaluations exist and that they are likely to be interpretations arising from interactions between the face stimuli and observer-specific traits. Monocularly viewed faces that varied independently along two social dimensions of trust and dominance were rendered invisible by continuous flash suppression (CFS) when a flashing pattern was presented to the other eye. Participants pressed a button as soon as they saw the face emerge from suppression to indicate whether the previously hidden face was located slightly to the left or right of central fixation. Dominant and untrustworthy faces took significantly longer time to emerge (T2E) compared with neutral faces. A control experiment showed these findings could not reflect delayed motor responses to conscious faces. Finally, we showed that participants' self-reported propensity to trust was strongly predictive of untrust avoidance (i.e., difference in T2E for untrustworthy vs neutral faces) as well as dominance avoidance (i.e., difference in T2E for dominant vs neutral faces). Dominance avoidance was also correlated with submissive behavior. We suggest that such prolongation of suppression for threatening faces may result from a passive fear response, leading to slowed visual perception. PMID:22468670

Unconscious evaluation of faces on social dimensions.

PubMed

Stewart, Lorna H; Ajina, Sara; Getov, Spas; Bahrami, Bahador; Todorov, Alexander; Rees, Geraint

2012-11-01

It has been proposed that two major axes, dominance and trustworthiness, characterize the social dimensions of face evaluation. Whether evaluation of faces on these social dimensions is restricted to conscious appraisal or happens at a preconscious level is unknown. Here we provide behavioral evidence that such preconscious evaluations exist and that they are likely to be interpretations arising from interactions between the face stimuli and observer-specific traits. Monocularly viewed faces that varied independently along two social dimensions of trust and dominance were rendered invisible by continuous flash suppression (CFS) when a flashing pattern was presented to the other eye. Participants pressed a button as soon as they saw the face emerge from suppression to indicate whether the previously hidden face was located slightly to the left or right of central fixation. Dominant and untrustworthy faces took significantly longer time to emerge (T2E) compared with neutral faces. A control experiment showed these findings could not reflect delayed motor responses to conscious faces. Finally, we showed that participants' self-reported propensity to trust was strongly predictive of untrust avoidance (i.e., difference in T2E for untrustworthy vs neutral faces) as well as dominance avoidance (i.e., difference in T2E for dominant vs neutral faces). Dominance avoidance was also correlated with submissive behavior. We suggest that such prolongation of suppression for threatening faces may result from a passive fear response, leading to slowed visual perception. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

Ignitability test method and apparatus

NASA Technical Reports Server (NTRS)

Bement, Laurence J. (Inventor); Bailey, James W. (Inventor); Schimmel, Morry L. (Inventor)

1989-01-01

An apparatus for testing ignitability of an initiator includes a body with a central cavity, initiator holder for holding the initiator over the central cavity of the body, an ignition material holder disposed in the central cavity of the body and a cavity facing the initiator holder which receives a measured quantity of ignition material to be ignited by the initiator and a chamber in communication with the cavity of the ignition material holder and the central cavity of the body. A measuring system for analyzing pressure characteristics is generated by ignition material by the initiator. The measuring system includes at least one transducer coupled to an oscillograph for recording pressure traces generated by ignition.

Ignitability test method and apparatus

NASA Technical Reports Server (NTRS)

Bement, Laurence J. (Inventor); Bailey, James W. (Inventor); Schimmel, Morry L. (Inventor)

1991-01-01

An apparatus for testing ignitability of an initiator includes a body having a central cavity, an initiator holder for holding the initiator over the central cavity of the body, an ignition material holder disposed in the central cavity of the body and having a cavity facing the initiator holder which receives a measured quantity of ignition material to be ignited by the initiator. It contains a chamber in communication with the cavity of the ignition material and the central cavity of the body, and a measuring system for analyzing pressure characteristics generated by ignition of the ignition material by the initiator. The measuring system includes at least one transducer coupled with an oscillograph for recording pressure traces generated by ignition.

Nondestructive estimation of wood chemical composition of sections of radial wood strips by diffuse reflectance near infrared spectroscopy

Treesearch

P. David Jones; Laurence R. Schimleck; Gary F. Peter; Richard F. Daniels; Alexander Clark

2006-01-01

The use of calibrated near infrared (NIR) spectroscopy for predicting the chemical composition of Pirus taeda L. (loblolly pine) wood samples is investigated. Seventeen P. taeda radial strips, representing seven different sites were selected and NlR spectra were obtained from the radial longitudinal face of each strip. The spectra...

Varieties of centralized intake: the Portland Target Cities Project experience.

PubMed

Barron, Nancy; McFarland, Bentson H; McCamant, Lynn

2002-01-01

To assess the possible influence of centralized intake on client outcomes, initial, six- and twelve-month Addiction Severity Index composite scores (in the alcohol, drug, legal and psychiatric areas) for clients who experienced provider intake were compared with scores for those going through two different models of centralized intake. Centralized intake clients were more likely than provider intake clients to have legal problems, and those legal problems became fewer over time. Clients from in-jail intake, including pretreatment services and accompanied placement, showed a greater initial and lower subsequent prevalence of drug, psychiatric and legal problems than the clients of the freestanding centralized intake. For all clients, psychiatric composite scores were powerful predictors of problems in alcohol, drug medical and legal areas, and psychiatric symptoms decreased over time. Since baseline differences in demographics and service assignment existed among the three groups, it was difficult to identify whether the outcome differences were due to the nature of the participants, the nature of the intake intervention, or both. However, the Portland Target Cities Projects's emphasis on in-jail centralized intake was associated with enhanced client outcomes.

Beyond the FFA: The Role of the Ventral Anterior Temporal Lobes in Face Processing

PubMed Central

Collins, Jessica A.; Olson, Ingrid R.

2014-01-01

Extensive research has supported the existence of a specialized face-processing network that is distinct from the visual processing areas used for general object recognition. The majority of this work has been aimed at characterizing the response properties of the fusiform face area (FFA) and the occipital face area (OFA), which together are thought to constitute the core network of brain areas responsible for facial identification. Although accruing evidence has shown that face-selective patches in the ventral anterior temporal lobes (vATLs) are interconnected with the FFA and OFA, and that they play a role in facial identification, the relative contribution of these brain areas to the core face-processing network has remained unarticulated. Here we review recent research critically implicating the vATLs in face perception and memory. We propose that current models of face processing should be revised such that the ventral anterior temporal lobes serve a centralized role in the visual face-processing network. We speculate that a hierarchically organized system of face processing areas extends bilaterally from the inferior occipital gyri to the vATLs, with facial representations becoming increasingly complex and abstracted from low-level perceptual features as they move forward along this network. The anterior temporal face areas may serve as the apex of this hierarchy, instantiating the final stages of face recognition. We further argue that the anterior temporal face areas are ideally suited to serve as an interface between face perception and face memory, linking perceptual representations of individual identity with person-specific semantic knowledge. PMID:24937188

Developmental trends in the process of constructing own- and other-race facial composites.

PubMed

Kehn, Andre; Renken, Maggie D; Gray, Jennifer M; Nunez, Narina L

2014-01-01

The current study examined developmental differences from the age of 5 to 18 in the creation process of own- and other-race facial composites. In addition, it considered how differences in the creation process affect similarity ratings. Participants created two composites (one own- and one other-race) from memory. The complexity of the composite creation process was recorded during Phase One. In Phase Two, a separate group of participants rated the composites for similarity to the corresponding target face. Results support the cross-race effect, developmental differences (based on composite creators) in similarity ratings, and the importance of the creation process for own- and other-race facial composites. Together, these findings suggest that as children get older the process through which they create facial composites becomes more complex and their ability to create facial composites improves. Increased complexity resulted in higher rated composites. Results are discussed from a psycho-legal perspective.

A spectroscopic analysis of Martian crater central peaks: Formation of the ancient crust

NASA Astrophysics Data System (ADS)

Skok, J. R.; Mustard, J. F.; Tornabene, L. L.; Pan, C.; Rogers, D.; Murchie, S. L.

2012-11-01

The earliest formed crust on a single plate planet such as Mars should be preserved, deeply buried under subsequent surface materials. Mars' extensive cratering history would have fractured and disrupted the upper layers of this ancient crust. Large impacts occurring late in Martian geologic history would have excavated and exposed this deeply buried material. We report the compositional analysis of unaltered mafic Martian crater central peaks with high-resolution spectral data that was used to characterize the presence, distribution and composition of mafic mineralogy. Reflectance spectra of mafic outcrops are modeled with the Modified Gaussian Model (MGM) to determine cation composition of olivine and pyroxene mineral deposits. Observations show that central peaks with unaltered mafic units are only observed in four general regions of Mars. Each mafic unit exhibits spectrally unmixed outcrops of olivine or pyroxene, indicating dunite and pyroxenite dominated compositions instead of basaltic composition common throughout much of the planet. Compositional analysis shows a wide range of olivine Fo# ranging from Fo60 to Fo5. This variation is best explained by a high degree of fractionation in a slowly cooling, differentiating magma body. Pyroxene analysis shows that all the sites in the Southern Highlands are consistent with moderately Fe-rich, low-Ca pyroxene. Mineral segregation in the ancient crust could be caused by cumulate crystallization and settling in a large, potentially global, lava lake or near surface plutons driven by a hypothesized early Martian mantle overturn.

A shape-based account for holistic face processing.

PubMed

Zhao, Mintao; Bülthoff, Heinrich H; Bülthoff, Isabelle

2016-04-01

Faces are processed holistically, so selective attention to 1 face part without any influence of the others often fails. In this study, 3 experiments investigated what type of facial information (shape or surface) underlies holistic face processing and whether generalization of holistic processing to nonexperienced faces requires extensive discrimination experience. Results show that facial shape information alone is sufficient to elicit the composite face effect (CFE), 1 of the most convincing demonstrations of holistic processing, whereas facial surface information is unnecessary (Experiment 1). The CFE is eliminated when faces differ only in surface but not shape information, suggesting that variation of facial shape information is necessary to observe holistic face processing (Experiment 2). Removing 3-dimensional (3D) facial shape information also eliminates the CFE, indicating the necessity of 3D shape information for holistic face processing (Experiment 3). Moreover, participants show similar holistic processing for faces with and without extensive discrimination experience (i.e., own- and other-race faces), suggesting that generalization of holistic processing to nonexperienced faces requires facial shape information, but does not necessarily require further individuation experience. These results provide compelling evidence that facial shape information underlies holistic face processing. This shape-based account not only offers a consistent explanation for previous studies of holistic face processing, but also suggests a new ground-in addition to expertise-for the generalization of holistic processing to different types of faces and to nonface objects. (c) 2016 APA, all rights reserved).

Late afternoon view of the interior of the westcentral wall ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Late afternoon view of the interior of the west-central wall section to be removed; camera facing north. Gravestones in the foreground. - Beaufort National Cemetery, Wall, 1601 Boundary Street, Beaufort, Beaufort County, SC

Effect of amino acids on the precipitation kinetics and Ca isotopic composition of gypsum

NASA Astrophysics Data System (ADS)

Harouaka, Khadouja; Kubicki, James D.; Fantle, Matthew S.

2017-12-01

Stirred gypsum (CaSO4 · 2H2O) precipitation experiments (initial Ωgypsum = 2.4 ± 0.14, duration ≈ 1.0-1.5 h) were conducted in the presence of the amino acids glycine (190 μM), L-alanine (190 μM), D- and L-arginine (45 μM), and L-tyrosine (200 μM) to investigate the effect of simple organic compounds on both the precipitation kinetics and Ca isotopic composition of gypsum. Relative to abiotic controls, glycine, tyrosine, and alanine inhibited precipitation rates by ∼22%, 27%, and 29%, respectively, while L- and D-arginine accelerated crystal growth by ∼8% and 48%, respectively. With the exception of tyrosine, amino acid induced inhibition resulted in fractionation factors (αs-f) associated with precipitation that were no more than 0.3‰ lower than amino acid-free controls. In contrast, the tyrosine and D- and L-arginine experiments had αs-f values associated with precipitation that were similar to the controls. Our experimental results indicate that Ca isotopic fractionation associated with gypsum precipitation is impacted by growth inhibition in the presence of amino acids. Specifically, we propose that the surface-specific binding of amino acids to gypsum can change the equilibrium fractionation factor of the bulk mineral. We investigate the hypothesis that amino acids can influence the growth of gypsum at specific crystal faces via adsorption and that different faces have distinct fractionation factors (αface-fluid). Accordingly, preferential sorption of amino acids at particular faces changes the relative, face-specific mass fluxes of Ca during growth, which influences the bulk isotopic composition of the mineral. Density functional theory (DFT) calculations suggest that the energetic favorability of glycine sorption onto gypsum crystal faces occurs in the order: (1 1 0) > (0 1 0) > (1 2 0) > (0 1 1), while glycine sorption onto the (-1 1 1) face was found to be energetically unfavorable. Face-specific fractionation factors constrained by frequency calculations of clusters derived from DFT structures vary by as much as 1.4‰. This suggests that the equilibrium fractionation factor for the bulk crystal can vary substantially, and that surface sorption can induce changes in αeq associated with gypsum precipitation. While we do not rule out the influence of kinetic isotope effects, our results clearly demonstrate that the mode of crystal growth can have a sizeable effect on the bulk fractionation factor (αs-f). Ultimately, our results suggest that the same mechanism by which organic molecules affect the morphology of a mineral can also impact the isotopic composition of the mineral. The results of our study provide valuable insight into the mechanism of Ca isotopic fractionation during gypsum precipitation. Our results are also important for establishing a framework for accurate interpretations of mineral-hosted Ca isotope records of the past, as we demonstrate a mechanistic pathway by which the biological and chemical environment can impact Ca isotopic fractionation during mineral precipitation.

Micromechanical models for textile structural composites

NASA Technical Reports Server (NTRS)

Marrey, Ramesh V.; Sankar, Bhavani V.

1995-01-01

The objective is to develop micromechanical models for predicting the stiffness and strength properties of textile composite materials. Two models are presented to predict the homogeneous elastic constants and coefficients of thermal expansion of a textile composite. The first model is based on rigorous finite element analysis of the textile composite unit-cell. Periodic boundary conditions are enforced between opposite faces of the unit-cell to simulate deformations accurately. The second model implements the selective averaging method (SAM), which is based on a judicious combination of stiffness and compliance averaging. For thin textile composites, both models can predict the plate stiffness coefficients and plate thermal coefficients. The finite element procedure is extended to compute the thermal residual microstresses, and to estimate the initial failure envelope for textile composites.

Correcting Thermal Deformations in an Active Composite Reflector

NASA Technical Reports Server (NTRS)

Bradford, Samuel C.; Agnes, Gregory S.; Wilkie, William K.

2011-01-01

Large, high-precision composite reflectors for future space missions are costly to manufacture, and heavy. An active composite reflector capable of adjusting shape in situ to maintain required tolerances can be lighter and cheaper to manufacture. An active composite reflector testbed was developed that uses an array of piezoelectric composite actuators embedded in the back face sheet of a 0.8-m reflector panel. Each individually addressable actuator can be commanded from 500 to +1,500 V, and the flatness of the panel can be controlled to tolerances of 100 nm. Measuring the surface flatness at this resolution required the use of a speckle holography interferometer system in the Precision Environmental Test Enclosure (PETE) at JPL. The existing testbed combines the PETE for test environment stability, the speckle holography system for measuring out-of-plane deformations, the active panel including an array of individually addressable actuators, a FLIR thermal camera to measure thermal profiles across the reflector, and a heat source. Use of an array of flat piezoelectric actuators to correct thermal deformations is a promising new application for these actuators, as is the use of this actuator technology for surface flatness and wavefront control. An isogrid of these actuators is moving one step closer to a fully active face sheet, with the significant advantage of ease in manufacturing. No extensive rib structure or other actuation backing structure is required, as these actuators can be applied directly to an easy-to-manufacture flat surface. Any mission with a surface flatness requirement for a panel or reflector structure could adopt this actuator array concept to create lighter structures and enable improved performance on orbit. The thermal environment on orbit tends to include variations in temperature during shadowing or changes in angle. Because of this, a purely passive system is not an effective way to maintain flatness at the scale of microns over several meters. This technology is specifically referring to correcting thermal deformations of a large, flat structure to a specified tolerance. However, the underlying concept (an array of actuators on the back face of a panel for correcting the flatness of the front face) could be extended to many applications, including energy harvesting, changing the wavefront of an optical system, and correcting the flatness of an array of segmented deployable panels.

Lactobacillus casei Encapsulated in Soy Protein Isolate and Alginate Microparticles Prepared by Spray Drying

PubMed Central

2017-01-01

Summary This article presents a novel formulation for preparation of Lactobacillus casei 01 encapsulated in soy protein isolate and alginate microparticles using spray drying method. A response surface methodology was used to optimise the formulation and the central composite face-centered design was applied to study the effects of critical material attributes and process parameters on viability of the probiotic after microencapsulation and in simulated gastrointestinal conditions. Spherical microparticles were produced in high yield (64%), narrow size distribution (d50=9.7 µm, span=0.47) and favourable mucoadhesive properties, with viability of the probiotic of 11.67, 10.05, 9.47 and 9.20 log CFU/g after microencapsulation, 3 h in simulated gastric and intestinal conditions and four-month cold storage, respectively. Fourier-transform infrared spectroscopy confirmed the probiotic stability after microencapsulation, while differential scanning calorimetry and thermogravimetry pointed to high thermal stability of the soy protein isolate-alginate microparticles with encapsulated probiotic. These favourable properties of the probiotic microparticles make them suitable for incorporation into functional food or pharmaceutical products. PMID:28867947

Large bedrock slope failures in a British Columbia, Canada fjord: first documented submarine sackungen

NASA Astrophysics Data System (ADS)

Conway, Kim W.; Vaughn Barrie, J.

2018-01-01

Very large (>60×106 m3) sackungen or deep-seated gravitational slope deformations occur below sea level along a steep fjord wall in central Douglas Channel, British Columbia. The massive bedrock blocks were mobile between 13 and 11.5 thousand radiocarbon years BP (15,800 and 13,400 BP) immediately following deglaciation. Deformation of fjord sediments is apparent in sedimentary units overlying and adjacent to the blocks. Faults bound the edges of each block, cutting the glacial section but not the Holocene sediments. Retrogressive slides, small inset landslides as well as incipient and older slides are found on and around the large failure blocks. Lineations, fractures and faults parallel the coastline of Douglas Channel along the shoreline of the study area. Topographic data onshore indicate that faults and joints demarcate discrete rhomboid-shaped blocks which controlled the form, size and location of the sackungen. The described submarine sackungen share characteristic geomorphic features with many montane occurrences, such as uphill-facing scarps, foliated bedrock composition, largely vertical dislocation and a deglacial timing of development.

Large bedrock slope failures in a British Columbia, Canada fjord: first documented submarine sackungen

NASA Astrophysics Data System (ADS)

Conway, Kim W.; Vaughn Barrie, J.

2018-06-01

Very large (>60×106 m3) sackungen or deep-seated gravitational slope deformations occur below sea level along a steep fjord wall in central Douglas Channel, British Columbia. The massive bedrock blocks were mobile between 13 and 11.5 thousand radiocarbon years BP (15,800 and 13,400 BP) immediately following deglaciation. Deformation of fjord sediments is apparent in sedimentary units overlying and adjacent to the blocks. Faults bound the edges of each block, cutting the glacial section but not the Holocene sediments. Retrogressive slides, small inset landslides as well as incipient and older slides are found on and around the large failure blocks. Lineations, fractures and faults parallel the coastline of Douglas Channel along the shoreline of the study area. Topographic data onshore indicate that faults and joints demarcate discrete rhomboid-shaped blocks which controlled the form, size and location of the sackungen. The described submarine sackungen share characteristic geomorphic features with many montane occurrences, such as uphill-facing scarps, foliated bedrock composition, largely vertical dislocation and a deglacial timing of development.

Optimisation of recovery protocols for double-base smokeless powder residues analysed by total vaporisation (TV) SPME/GC-MS.

PubMed

Sauzier, Georgina; Bors, Dana; Ash, Jordan; Goodpaster, John V; Lewis, Simon W

2016-09-01

The investigation of explosive events requires appropriate evidential protocols to recover and preserve residues from the scene. In this study, a central composite design was used to determine statistically validated optimum recovery parameters for double-base smokeless powder residues on steel, analysed using total vaporisation (TV) SPME/GC-MS. It was found that maximum recovery was obtained using isopropanol-wetted swabs stored under refrigerated conditions, then extracted for 15min into acetone on the same day as sample collection. These parameters were applied to the recovery of post-blast residues deposited on steel witness surfaces following a PVC pipe bomb detonation, resulting in detection of all target components across the majority of samples. Higher overall recoveries were obtained from plates facing the sides of the device, consistent with the point of first failure occurring in the pipe body as observed in previous studies. The methodology employed here may be readily applied to a variety of other explosive compounds, and thus assist in establishing 'best practice' procedures for explosive investigations. Copyright © 2016 Elsevier B.V. All rights reserved.

[Conceptual approach to formation of a modern system of medical provision].

PubMed

Belevitin, A B; Miroshnichenko, Iu V; Bunin, S A; Goriachev, A B; Krasavin, K D

2009-09-01

Within the frame of forming of a new face of medical service of the Armed Forces, were determined the principle approaches to optimization of the process of development of the system of medical supply. It was proposed to use the following principles: principle of hierarchic structuring, principle of purposeful orientation, principle of vertical task sharing, principle of horizontal task sharing, principle of complex simulation, principle of permanent perfection. The main direction of optimization of structure and composition of system of medical supply of the Armed Forces are: forming of modern institutes of medical supply--centers of support by technique and facilities on the base of central, regional storehouses, and attachment of several functions of organs of military government to them; creation of medical supply office on the base military hospitals, being basing treatment-prophylaxis institutes, in adjusted territorial zones of responsibility for the purpose of realization of complex of tasks of supplying the units and institutes, attached to them on medical support, by medical equipment. Building of medical support system is realized on three levels: Center - Military region (NAVY region) - territorial zone of responsibility.

Optimization of focused ultrasonic extraction of propellant components determined by gas chromatography/mass spectrometry.

PubMed

Fryš, Ondřej; Česla, Petr; Bajerová, Petra; Adam, Martin; Ventura, Karel

2012-09-15

A method for focused ultrasonic extraction of nitroglycerin, triphenyl amine and acetyl tributyl citrate presented in double-base propellant samples following by the gas chromatography/mass spectrometry analysis was developed. A face-centered central composite design of the experiments and response surface modeling was used for optimization of the time, amplitude and sample amount. The dichloromethane was used as the extractant solvent. The optimal extraction conditions with respect to the maximum yield of the lowest abundant compound triphenyl amine were found at the 20 min extraction time, 35% amplitude of ultrasonic waves and 2.5 g of the propellant sample. The results obtained under optimal conditions were compared with the results achieved with validated Soxhlet extraction method, which is typically used for isolation and pre-concentration of compounds from the samples of explosives. The extraction yields for acetyl tributyl citrate using both extraction methods were comparable; however, the yield of ultrasonic extraction of nitroglycerin and triphenyl amine was lower than using Soxhlet extraction. The possible sources of different extraction yields are estimated and discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

A simple, rapid and novel method based on salting-out assisted liquid-liquid extraction for ochratoxin A determination in beer samples prior to ultra-high performance liquid chromatography coupled to tandem mass spectrometry.

PubMed

Mariño-Repizo, Leonardo; Goicoechea, Hector; Raba, Julio; Cerutti, Soledad

2018-06-07

A novel, simple, easy and cheap sample treatment strategy based on salting-out assisted liquid-liquid extraction (SALLE) for ochratoxin A (OTA) ultra-trace analysis in beer samples using ultra-high performance liquid chromatography-tandem mass spectrometry determination was developed. The factors involved in the efficiency of pretreatment were studied employing factorial design in the screening phase and the optimal conditions of the significant variables on the analytical response were evaluated using a central composite face-centred design (CCF). Consequently, the amount of salt ((NH 4 ) 2 SO 4 ), together with the volumes of sample, hydrophilic (acetone) and nonpolar (toluene) solvents, and times of vortexing and centrifugation were optimized. Under optimized conditions, the limits of detection (LOD) and quantification (LOQ) were 0.02 µg l -1 and 0.08 µg l -1 respectively. OTA extraction recovery by SALLE was approximately 90% (0.2 µg l -1 ). Furthermore, the methodology was in agreement with EU Directive requirements and was successfully applied for analysis of beer samples.

Optimization of supercoiled HPV-16 E6/E7 plasmid DNA purification with arginine monolith using design of experiments.

PubMed

Almeida, A M; Queiroz, J A; Sousa, F; Sousa, A

2015-01-26

The progress of DNA vaccines is dependent on the development of suitable chromatographic procedures to successfully purify genetic vectors, such as plasmid DNA. Human Papillomavirus is associated with the development of tumours due to the oncogenic power of E6 and E7 proteins, produced by this virus. The supercoiled HPV-16 E6/E7 plasmid-based vaccine was recently purified with the arginine monolith, with 100% of purity, but only 39% of recovery was achieved. Therefore, the present study describes the application of experimental design tools, a newly explored methodology in preparative chromatography, in order to improve the supercoiled plasmid DNA recovery with the arginine monolith, maintaining the high purity degree. In addition, the importance and influence of pH in the pDNA retention to the arginine ligand was also demonstrated. The Composite Central Face design was validated and the recovery of the target molecule was successfully improved from 39% to 83.5%, with an outstanding increase of more than double, while maintaining 100% of purity. Copyright © 2014 Elsevier B.V. All rights reserved.

Optimization of the synthesis process of an iron oxide nanocatalyst supported on activated carbon for the inactivation of Ascaris eggs in water using the heterogeneous Fenton-like reaction.

PubMed

Morales-Pérez, Ariadna A; Maravilla, Pablo; Solís-López, Myriam; Schouwenaars, Rafael; Durán-Moreno, Alfonso; Ramírez-Zamora, Rosa-María

2016-01-01

An experimental design methodology was used to optimize the synthesis of an iron-supported nanocatalyst as well as the inactivation process of Ascaris eggs (Ae) using this material. A factor screening design was used for identifying the significant experimental factors for nanocatalyst support (supported %Fe, (w/w), temperature and time of calcination) and for the inactivation process called the heterogeneous Fenton-like reaction (H2O2 dose, mass ratio Fe/H2O2, pH and reaction time). The optimization of the significant factors was carried out using a face-centered central composite design. The optimal operating conditions for both processes were estimated with a statistical model and implemented experimentally with five replicates. The predicted value of the Ae inactivation rate was close to the laboratory results. At the optimal operating conditions of the nanocatalyst production and Ae inactivation process, the Ascaris ova showed genomic damage to the point that no cell reparation was possible showing that this advanced oxidation process was highly efficient for inactivating this pathogen.

The role of remotely sensed and other spatial data for predictive modeling: the Umatilla, Oregon example

USGS Publications Warehouse

Loveland, Thomas R.; Johnson, Gary E.

1981-01-01

The U. S. Geological Survey's Earth Resources Observations Systems Data Center, in cooperation with the U.S. Army Corps of Engineers, Portland District, developed and tested techniques that used remotely sensed and other spatial data in predictive models to evaluate irrigation agriculture in the Umatilla River Basin of north-central Oregon. Landsat data and 1:24,000-scale aerial photographs were initially used to map he expansion of irrigate from 1973 to 1979 and to identify crops under irrigation in 1979. The crop data were then used with historical water requirement figures and digital topographic and hydrographic data to estimate water and power use for the 1979 irrigation season. The final project task involved production of a composite map of land suitability for irrigation development based on land cover (from Landsat), land-ownership, soil irrigability, slope gradient, and potential energy costs. The methods and data used in the study demonstrated the flexibility of remotely sensed and other spatial data as input for predictive models. When combined, they provided useful answers to complex questions facing resource managers.

Multiobjective Optimization of Atmospheric Plasma Spray Process Parameters to Deposit Yttria-Stabilized Zirconia Coatings Using Response Surface Methodology

NASA Astrophysics Data System (ADS)

Ramachandran, C. S.; Balasubramanian, V.; Ananthapadmanabhan, P. V.

2011-03-01

Atmospheric plasma spraying is used extensively to make Thermal Barrier Coatings of 7-8% yttria-stabilized zirconia powders. The main problem faced in the manufacture of yttria-stabilized zirconia coatings by the atmospheric plasma spraying process is the selection of the optimum combination of input variables for achieving the required qualities of coating. This problem can be solved by the development of empirical relationships between the process parameters (input power, primary gas flow rate, stand-off distance, powder feed rate, and carrier gas flow rate) and the coating quality characteristics (deposition efficiency, tensile bond strength, lap shear bond strength, porosity, and hardness) through effective and strategic planning and the execution of experiments by response surface methodology. This article highlights the use of response surface methodology by designing a five-factor five-level central composite rotatable design matrix with full replication for planning, conduction, execution, and development of empirical relationships. Further, response surface methodology was used for the selection of optimum process parameters to achieve desired quality of yttria-stabilized zirconia coating deposits.

Optimality in Microwave-Assisted Drying of Aloe Vera ( Aloe barbadensis Miller) Gel using Response Surface Methodology and Artificial Neural Network Modeling

NASA Astrophysics Data System (ADS)

Das, Chandan; Das, Arijit; Kumar Golder, Animes

2016-10-01

The present work illustrates the Microwave-Assisted Drying (MWAD) characteristic of aloe vera gel combined with process optimization and artificial neural network modeling. The influence of microwave power (160-480 W), gel quantity (4-8 g) and drying time (1-9 min) on the moisture ratio was investigated. The drying of aloe gel exhibited typical diffusion-controlled characteristics with a predominant interaction between input power and drying time. Falling rate period was observed for the entire MWAD of aloe gel. Face-centered Central Composite Design (FCCD) developed a regression model to evaluate their effects on moisture ratio. The optimal MWAD conditions were established as microwave power of 227.9 W, sample amount of 4.47 g and 5.78 min drying time corresponding to the moisture ratio of 0.15. A computer-stimulated Artificial Neural Network (ANN) model was generated for mapping between process variables and the desired response. `Levenberg-Marquardt Back Propagation' algorithm with 3-5-1 architect gave the best prediction, and it showed a clear superiority over FCCD.

Response surface methodology for ozonation of trifluralin using advanced oxidation processes in an airlift photoreactor

NASA Astrophysics Data System (ADS)

Behin, J.; Farhadian, N.

2017-10-01

Degradation of trifluralin, as a wide used pesticide, was investigated by advance oxidation process comprising O3/UV/H2O2 in a concentric tube airlift photoreactor. Main and interactive effects of three independent factors including pH (5-9), superficial gas velocity (0.05-0.15 cm/s) and time (20-60 min) on the removal efficiency were assessed using central composite face-centered design and response surface method (RSM). The RSM allows to solve multivariable equations and to estimate simultaneously the relative importance of several contributing parameters even in the presence of complex interaction. Airlift photoreactor imposed a synergistic effect combining good mixing intensity merit with high ozone transfer rate. Mixing in the airlift photoreactor enhanced the UV light usage efficiency and its availability. Complete degradation of trifluralin was achieved under optimum conditions of pH 9 and superficial gas velocity 0.15 cm/s after 60 min of reaction time. Under these conditions, degradation of trifluralin was performed in a bubble column photoreactor of similar volume and a lower efficiency was observed.

Freeze drying formulation using microscale and design of experiment approaches: a case study using granulocyte colony-stimulating factor.

PubMed

Grant, Yitzchak; Matejtschuk, Paul; Bird, Christopher; Wadhwa, Meenu; Dalby, Paul A

2012-04-01

The lyophilization of proteins in microplates, to assess and optimise formulations rapidly, has been applied for the first time to a therapeutic protein and, in particular, one that requires a cell-based biological assay, in order to demonstrate the broader usefulness of the approach. Factorial design of experiment methods were combined with lyophilization in microplates to identify optimum formulations that stabilised granulocyte colony-stimulating factor during freeze drying. An initial screen rapidly identified key excipients and potential interactions, which was then followed by a central composite face designed optimisation experiment. Human serum albumin and Tween 20 had significant effects on maintaining protein stability. As previously, the optimum formulation was then freeze-dried in stoppered vials to verify that the microscale data is relevant to pilot scales. However, to validate the approach further, the selected formulation was also assessed for solid-state shelf-life through the use of accelerated stability studies. This approach allows for a high-throughput assessment of excipient options early on in product development, while also reducing costs in terms of time and quantity of materials required.

Biosurfactant production by Aureobasidium pullulans in stirred tank bioreactor: New approach to understand the influence of important variables in the process.

PubMed

Brumano, Larissa Pereira; Antunes, Felipe Antonio Fernandes; Souto, Sara Galeno; Dos Santos, Júlio Cesar; Venus, Joachim; Schneider, Roland; da Silva, Silvio Silvério

2017-11-01

Surfactants are amphiphilic molecules with large industrial applications produced currently by chemical routes mainly derived from oil industry. However, biotechnological process, aimed to develop new sustainable process configurations by using favorable microorganisms, already requires investigations in more details. Thus, we present a novel approach for biosurfactant production using the promising yeast Aureobasidium pullulans LB 83, in stirred tank reactor. A central composite face-centered design was carried out to evaluate the effect of the aeration rate (0.1-1.1min -1 ) and sucrose concentration (20-80g.L -1 ) in the biosurfactant maximum tensoactivity and productivity. Statistical analysis showed that the use of variables at high levels enhanced tensoactivity, showing 8.05cm in the oil spread test and productivity of 0.0838cm.h -1 . Also, unprecedented investigation of aeration rate and sucrose concentration relevance in biosurfactant production by A. pullulans in stirred tank reactor was detailed, demonstrating the importance to establish adequate conditions in bioreactors, aimed to scale-up process. Copyright © 2017 Elsevier Ltd. All rights reserved.

The modern atmospheric background dust load: Recognition in Central Asian snowpack, and compositional constraints

USGS Publications Warehouse

Hinkley, T.; Pertsiger, F.; Zavjalova, L.

1997-01-01

Dusts in strata of snowpack in the Alai-Pamir range, Kirghizstan, Central Asia, have chemical compositions that are in the same restricted range as those of the dusts found in snowpacks at three other locations: central south Greenland, the St. Elias range (Alaska), and coastal Antarctica, where special-type local dust sources certainly cannot dominate. This similarity at the four widely separated sites appears to indicate that there is a modern atmospheric background dust that is the same on a regional, hemispheric, or global scale. The common compositional range is that of average crustal rock, or of moderately ferromagnesian volcanic rock. It is not that of carbonate, nor highly siliciceous rocks. Previously, the existence of an atmospheric background dust has been postulated only on the basis of its particle size distribution, and only from observations in polar regions. The present study partially determines the chemical composition of the background dust, and confirms its existence in snowpack at four localities worldwide, including the center of the earth's largest continent where dusts of local source have considerable influence. U.S. copyright. Published in 1997 by the American Geophysical Union.

Structural building principles of complex face-centered cubic intermetallics.

PubMed

Dshemuchadse, Julia; Jung, Daniel Y; Steurer, Walter

2011-08-01

Fundamental structural building principles are discussed for all 56 known intermetallic phases with approximately 400 or more atoms per unit cell and space-group symmetry F43m, Fd3m, Fd3, Fm3m or Fm3c. Despite fundamental differences in chemical composition, bonding and electronic band structure, their complex crystal structures show striking similarities indicating common building principles. We demonstrate that the structure-determining elements are flat and puckered atomic {110} layers stacked with periodicities 2p. The atoms on this set of layers, which intersect each other, form pentagon face-sharing endohedral fullerene-like clusters arranged in a face-centered cubic packing (f.c.c.). Due to their topological layer structure, all these crystal structures can be described as (p × p × p) = p(3)-fold superstructures of a common basic structure of the double-diamond type. The parameter p, with p = 3, 4, 7 or 11, is determined by the number of layers per repeat unit and the type of cluster packing, which in turn are controlled by chemical composition.

Wear properties of alumina/zirconia composite ceramics for joint prostheses measured with an end-face apparatus.

PubMed

Morita, Yusuke; Nakata, Kenichi; Kim, Yoon-Ho; Sekino, Tohru; Niihara, Koichi; Ikeuchi, Ken

2004-01-01

While only alumina is applied to all-ceramic joint prostheses at present, a stronger ceramic is required to prevent fracture and chipping due to impingement and stress concentration. Zirconia could be a potential substitute for alumina because it has high strength and fracture toughness. However, the wear of zirconia/zirconia combination is too high for clinical use. Although some investigations on composite ceramics revealed that mixing of different ceramics was able to improve the mechanical properties of ceramics, there are few reports about wear properties of composite ceramics for joint prosthesis. Since acetabular cup and femoral head of artificial hip joint are finished precisely, they indicate high geometric conformity. Therefore, wear test under flat contact was carried out with an end-face wear testing apparatus for four kinds of ceramics: alumina monolith, zirconia monolith, alumina-based composite ceramic, and zirconia based composite ceramic. Mean contact pressure was 10 MPa and sliding velocity was 40 mm/s. The wear test continued for 72 hours and total sliding distance was 10 km. After the test, the wear factor was calculated. Worn surfaces were observed with a scanning electron micrograph (SEM). The results of this wear test show that the wear factors of the both composite ceramics are similarly low and their mechanical properties are much better than those of the alumina monolith and the zirconia monolith. According to these results, it is predicted that joint prostheses of the composite ceramics are safer against break down and have longer lifetime compared with alumina/alumina joint prostheses.

Telephone communication of HIV testing results for improving knowledge of HIV infection status.

PubMed

Tudor Car, Lorainne; Gentry, Sarah; van-Velthoven, Michelle H M M T; Car, Josip

2013-01-31

This is one of three Cochrane reviews that examine the role of the telephone in HIV/AIDS services. Both in developed and developing countries there is a large proportion of people who do not know they are infected with HIV. Knowledge of one's own HIV serostatus is necessary to access HIV support, care and treatment and to prevent acquisition or further transmission of HIV. Using telephones instead of face-to-face or other means of HIV test results delivery could lead to more people receiving their HIV test results. To assess the effectiveness of telephone use for delivery of HIV test results and post-test counselling.To evaluate the effectiveness of delivering HIV test results by telephone, we were interested in whether they can increase the proportion of people who receive their HIV test results and the number of people knowing their HIV status. We searched The Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, PubMed Central, PsycINFO, ISI Web of Science, Cumulative Index to Nursing & Allied Health (CINAHL), WHOs The Global Health Library and Current Controlled Trials from 1980 to June 2011. We also searched grey literature sources such as Dissertation Abstracts International,CAB Direct Global Health, OpenSIGLE, The Healthcare Management Information Consortium, Google Scholar, Conference on Retroviruses and Opportunistic Infections, International AIDS Society and AEGIS Education Global Information System, and reference lists of relevant studies for this review. Randomised controlled trials (RCTs), quasi-randomised controlled trials (qRCTs), controlled before and after studies (CBAs), and interrupted time series (ITS) studies comparing the effectiveness of telephone HIV test results notification and post-test counselling to face-to-face or other ways of HIV test result delivery in people regardless of their demographic characteristics and in all settings. Two reviewers independently searched, screened, assessed study quality and extracted data. A third reviewer resolved any disagreement. Out of 14 717 citations, only one study met the inclusion criteria; an RCT conducted on homeless and high-risk youth between September 1998 and October 1999 in Portland, United States. Participants (n=351) were offered counselling and oral HIV testing and were randomised into face-to-face (n=187 participants) and telephone (n=167) notification groups. The telephone notification group had the option of receiving HIV test results either by telephone or face-to-face. Overall, only 48% (n=168) of participants received their HIV test results and post-test counselling. Significantly more participants received their HIV test results in the telephone notification group compared to the face-to-face notification group; 58% (n=106) vs. 37% (n=62) (p < 0.001). In the telephone notification group, the majority of participants who received their HIV test results did so by telephone (88%, n=93). The study could not offer information about the effectiveness of telephone HIV test notification with HIV-positive participants because only two youth tested positive and both were assigned to the face-to-face notification group. The study had a high risk of bias. We found only one eligible study. Although this study showed the use of the telephone for HIV test results notification was more effective than face-to-face delivery, it had a high-risk of bias. The study was conducted about 13 years ago in a high-income country, on a high-risk population, with low HIV prevalence, and the applicability of its results to other settings and contexts is unclear. The study did not provide information about telephone HIV test results notification of HIV positive people since none of the intervention group participants were HIV positive. We found no information about the acceptability of the intervention to patients' and providers', its economic outcomes or potential adverse effects. There is a need for robust evidence from various settings on the effectiveness of telephone use for HIV test results notification.

Influence of aspect and slope gradient on hydraulic conductivity measured by tension infiltrometer

NASA Astrophysics Data System (ADS)

Casanova, Manuel; Messing, Ingmar; Joel, Abraham

2000-01-01

A tension infiltrometer technique was used to characterize differences in hydraulic conductivity (K) in two rain-fed hillsides (north-facing and south-facing) in central Chile. For the north-facing locations, smaller values of K (at a range of supply water pressure heads ) compared with south-facing locations were found, with accentuated differences close to saturation (zero pressure head). The differences were attributed to differences in texture and organic matter contents observed for the two sites. Furthermore, K() had a tendency to increase with increasing slope gradient. This tendency was to an extent explained by the deviation from requirements of measurements on level ground. The differences found in K() between different slope gradients were explained by the differences in the vertical and lateral hydraulic conductivity and by the occurrence of surface sealing in low slope plots.

Have a Nice Spring! MOC Revisits "Happy Face" Crater

NASA Image and Video Library

2005-05-16

Smile! Spring has sprung in the martian southern hemisphere. With it comes the annual retreat of the winter polar frost cap. This view of "Happy Face Crater"--officially named "Galle Crater"--shows patches of white water ice frost in and around the crater's south-facing slopes. Slopes that face south will retain frost longer than north-facing slopes because they do not receive as much sunlight in early spring. This picture is a composite of images taken by the Mars Global Surveyor Mars Orbiter Camera (MOC) red and blue wide angle cameras. The wide angle cameras were designed to monitor the changing weather, frost, and wind patterns on Mars. Galle Crater is located on the east rim of the Argyre Basin and is about 215 kilometers (134 miles) across. In this picture, illumination is from the upper left and north is up. http://photojournal.jpl.nasa.gov/catalog/PIA02325

Airborne In Situ and Ground-based Polarimetric Radar Measurements of Tropical Convection in Support of CRYSTAL-FACE

NASA Technical Reports Server (NTRS)

Poellot, Michael R.; Kucera, Paul A.

2004-01-01

This report describes the work performed by the University of North Dakota (UND) under NASA Grant NAG5-11509, titled Airborne In Situ and Ground-based Polarimetric Radar Measurements of Tropical Convection in Support of CRYSTAL-FACE. This work focused on the collection of data by two key platforms: the UND Citation II research aircraft and the NASA NPOL radar system. The CRYSTAL-FACE (C-F) mission addresses several key issues from the NASA Earth System Enterprise, including the variability of water in the atmosphere, the forcing provided by tropical cirrus and the response of the Earth system to this forcing. In situ measurements and radar observations of tropical convection, cirrus clouds and their environment are core elements of C-F. One of the primary issues that C-F is addressing is the relationship of tropical cirrus anvils to precipitating deep convection. The in situ measurements from C-F are being used to validate remote sensing of Earth-Atmosphere properties, increase our knowledge of upper tropospheric water vapor and its distribution, and increase our knowledge of tropical cirrus cloud morphology and composition. Radar measurements, especially polarimetric diversity observations available fiom the NASA NPOL radar, are providing essential information about the initiation, modulation, and dissipation of convective cores and the generation of associated anvils in tropical convection. Specifically, NPOL radar measurements contain information about convective intensity and its vertical structure for comparison with thermodynamic and kinematic environmental measurements observed from soundings. Because of the polarimetric diversity of MOL, statistics on bulk microphysical properties can be retrieved and compared to the other characteristics of convection and associated cirrus anvils. In summary, the central objectives of this proposal were to deploy the UND Citation research aircraft as an in situ sensing platform for this mission and to provide collaborative analyses of the recorded data and to deploy the NPOL radar to observe the characteristics of cirrus and parent convection.

Manufacturing development of pultruded composite panels

NASA Technical Reports Server (NTRS)

Meade, L. E.

1989-01-01

The weight savings potential, of graphite-epoxy composites for secondary and medium primary aircraft structures, was demonstrated. One of the greatest challenges facing the aircraft industry is to reduce the acquisition costs for composite structures to a level below that of metal structures. The pultrusion process, wherein reinforcing fibers, after being passed through a resin bath are drawn through a die to form and cure the desired cross-section, is an automated low cost manufacturing process for composite structures. The Lockheed Aeronautical Systems Company (LASC) Composites Development Center designed, characterizated materials for, fabricated and tested a stiffened cover concept compatible with the continuous pultrusion process. The procedures used and the results obtained are presented.

Rewriting in Advanced Composition.

ERIC Educational Resources Information Center

Stone, William B.

A college English instructor made an informal comparison of rewriting habits of students in a freshman composition course and two advanced composition courses. Notes kept on student rewriting focused on this central question: given peer and instructor response to their papers and a choice as to what and how to rewrite, what will students decide to…

Variations in the monoterpene composition of ponderosa pine wood oleoresin

Treesearch

Richard H. Smith

1964-01-01

A wide range in quantitative composition of the wood oleoresin monoterpenes was found among 64 ponderosa pines in the central Sierra Nevada by gas chromatographic analysis. An inverse relationship was found in the amount of β-pinene and Δ3-carene. Practically no difference in composition could be associated with (a) type of...

Rainfall Type as a Dominant Control of the Isotopic Composition of Precipitation in the South Central United States

NASA Astrophysics Data System (ADS)

Sun, C.; Shanahan, T. M.; Partin, J. W.

2017-12-01

The processes that control the isotopic composition of precipitation in the mid-latitudes are understudied compared to the high and low latitudes, but are critical for interpreting paleo records using isotope proxies. To better understand these processes, we investigated changes of isotopic composition of rainwater in Central Texas using 20 months of event-based rainwater collection. We find that in both the event-based data and the monthly data from the Waco GNIP station, the dominant control on the isotopic composition of precipitation is the proportion that is derived from convective systems. This finding is consistent with previously reported data largely from tropical localities (Aggarwal et al., 2016), where large organized convective systems lead to high rainfall amounts and isotopically depleted precipitation. Although there are seasonal differences in the dominant rainfall types over the South Central US, with winter precipitation almost entirely stratiform, seasonality plays very little role in the net isotopic composition of precipitation because the total contribution during winter is small compared with spring, summer and fall. We also find that changes of source have little effect on the isotopic composition of rainfall, as the majority of the moisture is derived from the Gulf of Mexico with little influence of reevaporation or mixing. The majority of the warm season precipitation in the South Central US occurs in association with mesoscale convective systems (MCSs) and the development of these systems plays a critical role in the overall isotopic signature of precipitation. MCSs are characterized by a combination of intense, organized convection at their leading edges and trailing stratiform precipitation. Larger MCSs tend to contain higher proportions of stratiform rainfall and as a result, have isotopically depleted values. Proxy records from this region displaying more negative isotope values in the past should therefore be interpreted with caution as they could reflect either increases in cool versus warm season precipitation or changes in the intensity of warm season MCSs.

Lithologic mapping of silicate rocks using TIMS

NASA Technical Reports Server (NTRS)

Gillespie, A. R.

1986-01-01

Common rock-forming minerals have thermal infrared spectral features that are measured in the laboratory to infer composition. An airborne Daedalus scanner (TIMS) that collects six channels of thermal infrared radiance data (8 to 12 microns), may be used to measure these same features for rock identification. Previously, false-color composite pictures made from channels 1, 3, and 5 and emittance spectra for small areas on these images were used to make lithologic maps. Central wavelength, standard deviation, and amplitude of normal curves regressed on the emittance spectra are related to compositional information for crystalline igneous silicate rocks. As expected, the central wavelength varies systematically with silica content and with modal quartz content. Standard deviation is less sensitive to compositional changes, but large values may result from mixed admixture of vegetation. Compression of the six TIMS channels to three image channels made from the regressed parameters may be effective in improving geologic mapping from TIMS data, and these synthetic images may form a basis for the remote assessment of rock composition.

Why does selective attention to parts fail in face processing?

PubMed

Richler, Jennifer J; Tanaka, James W; Brown, Danielle D; Gauthier, Isabel

2008-11-01

One hallmark of holistic face processing is an inability to selectively attend to 1 face part while ignoring information in another part. In 3 sequential matching experiments, the authors tested perceptual and decisional accounts of holistic processing by measuring congruency effects between cued and uncued composite face halves shown in spatially aligned or disjointed configurations. The authors found congruency effects when the top and bottom halves of the study face were spatially aligned, misaligned (Experiment 1), or adjacent to one another (Experiment 2). However, at test, congruency effects were reduced by misalignment and abolished for adjacent configurations. This suggests that manipulations at test are more influential than manipulations at study, consistent with a decisional account of holistic processing. When encoding demands for study and test faces were equated (Experiment 3), the authors observed effects of study configuration suggesting that, consistent with a perceptual explanation, encoding does influence the magnitude of holistic processing. Together, these results cannot be accounted for by current perceptual or decisional accounts of holistic processing and suggest the existence of an attention-dependent mechanism that can integrate spatially separated face parts.

Onset of bell's palsy in late pregnancy and early puerperium is associated with worse long-term outcomes.

PubMed

Phillips, Katie M; Heiser, Alyssa; Gaudin, Robert; Hadlock, Tessa A; Jowett, Nate

2017-12-01

The incidence of Bell's palsy (BP) is elevated in the late phases of pregnancy. Controversy exists as to whether pregnancy is a risk factor for worse outcomes in BP, and whether such outcomes are the result of factors intrinsic to pregnancy or the tendency to withhold medical therapy in this cohort. Long-term facial function outcomes in cases of pregnancy-associated BP (PABP) were compared against outcomes in cases affecting nonpregnant adult women of child-bearing age by a blinded expert using the electronic clinician-graded facial function scale (eFACE) facial grading system. Fifty-one pregnancy-associated cases and 58 nonpregnancy-associated cases were included. Among patients who received early corticosteroid therapy, significantly worse static, synkinesis, and composite facial function eFACE scores were demonstrated among cases of PABP compared to nonpregnancy-associated cases (static median = 86 vs. 92.5, P = 0.005; synkinesis median = 79 vs. 86, P = 0.007; composite median = 78 vs. 84, P = 0.023). Among those not treated with corticosteroids, significantly worse dynamic and composite facial function eFACE scores were demonstrated in cases of PABP compared to those for nonpregnancy-associated cases (dynamic median = 74 vs. 92.5, P = 0.038; composite median = 73 vs. 86.5, P = 0.038). A trend toward improved outcomes was demonstrated within both groups for those treated with corticosteroids compared to those who were not. In comparison to cases unrelated to pregnancy, late-term PABP is associated with worse long-term outcomes to a degree that cannot solely be explained by differences in medical therapy. 4. Laryngoscope, 127:2854-2859, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

American Hospital Association

MedlinePlus

... Central Office-Coding Resources AHA Team Training Health Career Center Health Forum Connect More Regulatory Relief The regulatory burden faced by hospitals is substantial and unsustainable. Read the report . More AHA Opioid Toolkit Stem the Tide: Addressing the Opioid Epidemic More ...

FACILITY 712, EXTERIOR DETAIL OF FIREPLACE AND LEADEDGLASS WINDOWS, VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 712, EXTERIOR DETAIL OF FIREPLACE AND LEADED-GLASS WINDOWS, VIEW FACING WEST. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI

DETAIL ELEVATION VIEW OF EXTERIOR STAIRS ON THE EAST END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL ELEVATION VIEW OF EXTERIOR STAIRS ON THE EAST END OF BUILDING 63, FACING SOUTH. - Naval Computer & Telecommunications Area Station, Enlisted Men's Barracks, West corner of Central Street & Midway Drive, Wahiawa, Honolulu County, HI

INTERIOR VIEW OF FIRST FLOOR HALLWAY FROM THE EAST END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR VIEW OF FIRST FLOOR HALLWAY FROM THE EAST END OF BUILDING 63, FACING WEST. - Naval Computer & Telecommunications Area Station, Enlisted Men's Barracks, West corner of Central Street & Midway Drive, Wahiawa, Honolulu County, HI

Evaluating regional differences in macroinvertebrate communities from forested depressional wetlands across eastern and central North America

Treesearch

Darold P. Batzer; Susan E. Dietz-Brantley; Barbara E. Taylor; Adrienne E. DeBiase

2005-01-01

Forested depressional wetlands are an important seasonal wetland type across eastern and central North America. Macroinvertebrates are crucial ecosystem components of most forested depressional wetlands, but community compositions can vary widely across the region. We evaluated variation in macroinvertebrate faunas across eastern and central North America using 5...

The Psychology of Working Theory.

PubMed

Duffy, Ryan D; Blustein, David L; Diemer, Matthew A; Autin, Kelsey L

2016-03-01

In the current article, we build on research from vocational psychology, multicultural psychology, intersectionality, and the sociology of work to construct an empirically testable Psychology of Working Theory (PWT). Our central aim is to explain the work experiences of all individuals, but particularly people near or in poverty, people who face discrimination and marginalization in their lives, and people facing challenging work-based transitions for which contextual factors are often the primary drivers of the ability to secure decent work. The concept of decent work is defined and positioned as the central variable within the theory. A series of propositions is offered concerning (a) contextual predictors of securing decent work, (b) psychological and economic mediators and moderators of these relations, and (c) outcomes of securing decent work. Recommendations are suggested for researchers seeking to use the theory and practical implications are offered concerning counseling, advocacy, and public policy. (c) 2016 APA, all rights reserved).

Cultural differences in stigma surrounding schizophrenia: comparison between Central Europe and North Africa.

PubMed

Angermeyer, Matthias C; Carta, Mauro G; Matschinger, Herbert; Millier, Aurélie; Refaï, Tarek; Schomerus, Georg; Toumi, Mondher

2016-04-01

Exploring cultural differences may improve understanding about the social processes underlying the stigmatisation of people with mental illness. To compare public beliefs and attitudes about schizophrenia in Central Europe and North Africa. Representative national population surveys conducted in Germany (2011) and in Tunisia (2012), using the same interview mode (face to face) and the same fully structured interview. In Tunisia, respondents showed a stronger tendency to hold the person with schizophrenia responsible for the condition. At the same time they expressed more prosocial reactions and less fear than their German counterparts. In Germany, the desire for social distance was greater for more distant relationships, whereas in Tunisia this was the case for close, family-related relationships. Stigma differs between Tunisia and Germany more in form than in magnitude. It manifests particularly in those social roles which 'matter most' to people within a given culture. © The Royal College of Psychiatrists 2015.

Solar energy apparatus with apertured shield

NASA Technical Reports Server (NTRS)

Collings, Roger J. (Inventor); Bannon, David G. (Inventor)

1989-01-01

A protective apertured shield for use about an inlet to a solar apparatus which includesd a cavity receiver for absorbing concentrated solar energy. A rigid support truss assembly is fixed to the periphery of the inlet and projects radially inwardly therefrom to define a generally central aperture area through which solar radiation can pass into the cavity receiver. A non-structural, laminated blanket is spread over the rigid support truss in such a manner as to define an outer surface area and an inner surface area diverging radially outwardly from the central aperture area toward the periphery of the inlet. The outer surface area faces away from the inlet and the inner surface area faces toward the cavity receiver. The laminated blanket includes at least one layer of material, such as ceramic fiber fabric, having high infra-red emittance and low solar absorption properties, and another layer, such as metallic foil, of low infra-red emittance properties.

Practices, perceptions, and implications of fertilizer use in East-Central China.

PubMed

Yang, Xiaoying; Fang, Shubo

2015-11-01

Face-to-face interviews (n = 553) were conducted in five counties in East-Central China to study farmers' fertilizer application behaviors, decision-making processes, attitudes towards adopting better fertilizer application technologies, and environmental consciousness. The survey results revealed widespread fertilizer misapplication and highly variable application behaviors in the study regions. The lack of scientific knowledge on fertilizers and the absence of guidance from agricultural extension services have forced the farmers to rely on personal judgment and advice from fertilizer dealers and friends to make decisions in fertilizer application. Overall, farmers have been idiosyncratic in fertilizer application with limited adoption of better fertilizer application technologies. There are great potentials for reducing pollutant load from agricultural runoff through promoting scientific fertilizer application in the regions. However, farmers' diverse preferences over agricultural extension programs necessitate an integrated approach emphasizing farmer involvement throughout the development of such programs for promoting better fertilizer application practices.

Graphite/Cyanate Ester Face Sheets for Adaptive Optics

NASA Technical Reports Server (NTRS)

Bennett, Harold; Shaffer, Joseph; Romeo, Robert

2008-01-01

It has been proposed that thin face sheets of wide-aperture deformable mirrors in adaptive-optics systems be made from a composite material consisting of cyanate ester filled with graphite. This composite material appears to offer an attractive alternative to low-thermal-expansion glasses that are used in some conventional optics and have been considered for adaptive-optics face sheets. Adaptive-optics face sheets are required to have maximum linear dimensions of the order of meters or even tens of meters for some astronomical applications. If the face sheets were to be made from low-thermal-expansion glasses, then they would also be required to have thicknesses of the order of a millimeter so as to obtain the optimum compromise between the stiffness needed for support and the flexibility needed to enable deformation to controlled shapes by use of actuators. It is difficult to make large glass sheets having thicknesses less than 3 mm, and 3-mm-thick glass sheets are too stiff to be deformable to the shapes typically required for correction of wavefronts of light that has traversed the terrestrial atmosphere. Moreover, the primary commercially produced candidate low-thermal-expansion glass is easily fractured when in the form of thin face sheets. Graphite-filled cyanate ester has relevant properties similar to those of the low-expansion glasses. These properties include a coefficient of thermal expansion (CTE) of the order of a hundredth of the CTEs of other typical mirror materials. The Young s modulus (which quantifies stiffness in tension and compression) of graphite-filled cyanate ester is also similar to the Young's moduli of low-thermal-expansion glasses. However, the fracture toughness of graphite-filled cyanate ester is much greater than that of the primary candidate low-thermal-expansion glass. Therefore, graphite-filled cyanate ester could be made into nearly unbreakable face sheets, having maximum linear dimensions greater than a meter and thicknesses of the order of a millimeter, that would satisfy the requirements for use in adaptive optics.

Comparison of the abundance and composition of litter fauna in tropical and subalpine forests

Treesearch

G. Gonzalez; T.R. Seastedt

2000-01-01

In this study, we quantify the abundance and composition of the litter fauna in dry and wet tropical forests and north- and south-facing subalpine forests. We used the same litter species contained in litterbags across study sites to standardize for substrate conditions, and a single method of fauna extraction from the litter (Tullgren method). Fauna densities were...

Bending analyses for 3D engineered structural panels made from laminated paper and carbon fabric

Treesearch

Jinghao Li; John F. Hunt; Zhiyong Cai; Xianyan Zhou

2013-01-01

This paper presents analysis of a 3-dimensional engineered structural panel (3DESP) having a tri-axial core structure made from phenolic impregnated laminated-paper composites with and without high strength composite carbon-fiber fabric laminated to the outside of both faces. Both I-beam equations and finite element method were used to analyze four-point bending of the...

Novel Electrospun Dual-Layered Composite Nanofibrous Membrane Endowed with Electricity-Magnetism Bifunctionality at One Layer and Photoluminescence at the Other Layer.

PubMed

Wang, Zijiao; Ma, Qianli; Dong, Xiangting; Li, Dan; Xi, Xue; Yu, Wensheng; Wang, Jinxian; Liu, Guixia

2016-10-05

Dual-layered composite nanofibrous membrane equipped with electrical conduction, magnetism and photoluminescence trifunctionality is constructed via electrospinning. The composite membrane consists of a polyaniline (PANI)/Fe 3 O 4 nanoparticles (NPs)/polyacrylonitrile (PAN) tuned electrical-magnetic bifunctional nanofibrous layer at one side and a Eu(TTA) 3 (TPPO) 2 /polyvinylpyrrolidone (PVP) photoluminescent nanofibrous layer at the other side, and the two layers are tightly combined face-to-face together into the novel dual-layered composite membrane with trifunctionality. The electric conductivity and magnetism of electrical-magnetic bifunctionality can be respectively tunable via modulating the respective PANI and Fe 3 O 4 NPs contents, and the highest electric conductivity approaches the order of 1 × 10 -2 S cm -1 . Predominant red emission at 615 nm can be obviously observed in the photoluminescent layer under 366 nm excitation. Moreover, the luminescent intensity of photoluminescent layer is almost unaffected by the electrical-magnetic bifunctional layer because of the fact that the photoluminescent materials have been successfully isolated from dark-colored PANI and Fe 3 O 4 NPs. The novel dual-layered composite nanofibrous membrane with trifunctionality has potentials in many fields. Furthermore, the design philosophy and fabrication method for the dual-layered multifunctional membrane provide a new and facile strategy toward other membranes with multifunctionality.

LeFort I osteotomy and secondary procedures in full-face transplant patients.

PubMed

Barret, Juan P; Serracanta, Jordi

2013-05-01

Composite tissue allotransplantion has been the latest addition to reconstructive plastic surgery of limbs and faces. These techniques have opened up a new paradigm in reconstruction. However, plastic surgeons will have to face a new patient population that receives the application of vascularised tissue allografts and immunosuppression. Secondary surgery may be necessary in this population, especially in the transplanted tissues, to improve aesthetics and function following the transplant, although little is known regarding the exact clinical protocol to be followed and the feasibility of standard plastic surgery techniques on transplanted tissues. We present our experience of a LeFort I osteotomy, limited ritidectomy and blepharoplasty in a full-face transplant recipient. Copyright © 2012 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

What drives social in-group biases in face recognition memory? ERP evidence from the own-gender bias

PubMed Central

Kemter, Kathleen; Schweinberger, Stefan R.; Wiese, Holger

2014-01-01

It is well established that memory is more accurate for own-relative to other-race faces (own-race bias), which has been suggested to result from larger perceptual expertise for own-race faces. Previous studies also demonstrated better memory for own-relative to other-gender faces, which is less likely to result from differences in perceptual expertise, and rather may be related to social in-group vs out-group categorization. We examined neural correlates of the own-gender bias using event-related potentials (ERP). In a recognition memory experiment, both female and male participants remembered faces of their respective own gender more accurately compared with other-gender faces. ERPs during learning yielded significant differences between the subsequent memory effects (subsequently remembered – subsequently forgotten) for own-gender compared with other-gender faces in the occipito-temporal P2 and the central N200, whereas neither later subsequent memory effects nor ERP old/new effects at test reflected a neural correlate of the own-gender bias. We conclude that the own-gender bias is mainly related to study phase processes, which is in line with sociocognitive accounts. PMID:23474824

No fear, no panic: probing negation as a means for emotion regulation

PubMed Central

Deutsch, Roland; Platte, Petra; Pauli, Paul

2013-01-01

This electroencephalographic study investigated if negating one’s emotion results in paradoxical effects or leads to effective emotional downregulation. Healthy participants were asked to downregulate their emotions to happy and fearful faces by using negated emotional cue words (e.g. no fun, no fear). Cue words were congruent with the emotion depicted in the face and presented prior to each face. Stimuli were presented in blocks of happy and fearful faces. Blocks of passive stimulus viewing served as control condition. Active regulation reduced amplitudes of early event-related brain potentials (early posterior negativity, but not N170) and the late positive potential for fearful faces. A fronto-central negativity peaking at about 250 ms after target face onset showed larger amplitude modulations during downregulation of fearful and happy faces. Behaviorally, negating was more associated with reappraisal than with suppression. Our results suggest that in an emotional context, negation processing could be quite effective for emotional downregulation but that its effects depend on the type of the negated emotion (pleasant vs unpleasant). Results are discussed in the context of dual process models of cognition and emotion regulation. PMID:22490924

Vegetation of steep slopes in the shrub-steppe region of south-central Washington

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sauer, R H; Rickard, W H

1977-01-01

This paper presents data and conclusions concerning the vegetation and soils of steep natural slopes of arid regions. Cover by species and soil physical and chemical properties were taken from 10 canyons along the Columbia River north of Pasco, Washington. Vegetative cover was significantly different and averaged 25 percent on the south-facing and 72 percent on the north-facing slopes. The mean number of species were significantly different. Four species were restricted to the south slopes, 10 were restricted to the north slopes, and 23 were common to both. Poa sandbergii and Agropyron spicatum, native perennial grasses, dominated the north-facing slopesmore » and Bromus tectorum, an alien annual grass, dominated the south-facing slopes. Soils were shallower and rockier on the south-facing slopes. Even though vegetative cover and number of species were different, the similar number of dominant species suggest community functions are nonetheless similar in these contrasting environments.« less

When some is actually all: scalar inferences in face-threatening contexts.

PubMed

Bonnefon, Jean-François; Feeney, Aidan; Villejoubert, Gaëlle

2009-08-01

Accounts of the scalar inference from 'some X-ed' to 'not all X-ed' are central to the debate between contemporary theories of conversational pragmatics. An important contribution to this debate is to identify contexts that decrease the endorsement rate of the inference. We suggest that the inference is endorsed less often in face-threatening contexts, i.e., when X implies a loss of face for the listener. This claim is successfully tested in Experiment 1. Experiment 2 rules out a possible confound between face-threatening contexts and lower-bound contexts. Experiment 3 shows that whilst saying 'some X-ed' when one knew for a fact that all X-ed is always perceived as an underinformative utterance, it is also seen as a nice and polite thing to do when X threatens the face of the listener. These findings are considered from the perspective of Relevance Theory as well as that of the Generalized Conversational Inference approach.

The many faces of graph dynamics

NASA Astrophysics Data System (ADS)

Pignolet, Yvonne Anne; Roy, Matthieu; Schmid, Stefan; Tredan, Gilles

2017-06-01

The topological structure of complex networks has fascinated researchers for several decades, resulting in the discovery of many universal properties and reoccurring characteristics of different kinds of networks. However, much less is known today about the network dynamics: indeed, complex networks in reality are not static, but rather dynamically evolve over time. Our paper is motivated by the empirical observation that network evolution patterns seem far from random, but exhibit structure. Moreover, the specific patterns appear to depend on the network type, contradicting the existence of a ‘one fits it all’ model. However, we still lack observables to quantify these intuitions, as well as metrics to compare graph evolutions. Such observables and metrics are needed for extrapolating or predicting evolutions, as well as for interpolating graph evolutions. To explore the many faces of graph dynamics and to quantify temporal changes, this paper suggests to build upon the concept of centrality, a measure of node importance in a network. In particular, we introduce the notion of centrality distance, a natural similarity measure for two graphs which depends on a given centrality, characterizing the graph type. Intuitively, centrality distances reflect the extent to which (non-anonymous) node roles are different or, in case of dynamic graphs, have changed over time, between two graphs. We evaluate the centrality distance approach for five evolutionary models and seven real-world social and physical networks. Our results empirically show the usefulness of centrality distances for characterizing graph dynamics compared to a null-model of random evolution, and highlight the differences between the considered scenarios. Interestingly, our approach allows us to compare the dynamics of very different networks, in terms of scale and evolution speed.

Impaired holistic processing of unfamiliar individual faces in acquired prosopagnosia.

PubMed

Ramon, Meike; Busigny, Thomas; Rossion, Bruno

2010-03-01

Prosopagnosia is an impairment at individualizing faces that classically follows brain damage. Several studies have reported observations supporting an impairment of holistic/configural face processing in acquired prosopagnosia. However, this issue may require more compelling evidence as the cases reported were generally patients suffering from integrative visual agnosia, and the sensitivity of the paradigms used to measure holistic/configural face processing in normal individuals remains unclear. Here we tested a well-characterized case of acquired prosopagnosia (PS) with no object recognition impairment, in five behavioral experiments (whole/part and composite face paradigms with unfamiliar faces). In all experiments, for normal observers we found that processing of a given facial feature was affected by the location and identity of the other features in a whole face configuration. In contrast, the patient's results over these experiments indicate that she encodes local facial information independently of the other features embedded in the whole facial context. These observations and a survey of the literature indicate that abnormal holistic processing of the individual face may be a characteristic hallmark of prosopagnosia following brain damage, perhaps with various degrees of severity. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Perceptual dehumanization of faces is activated by norm violations and facilitates norm enforcement.

PubMed

Fincher, Katrina M; Tetlock, Philip E

2016-02-01

This article uses methods drawn from perceptual psychology to answer a basic social psychological question: Do people process the faces of norm violators differently from those of others--and, if so, what is the functional significance? Seven studies suggest that people process these faces different and the differential processing makes it easier to punish norm violators. Studies 1 and 2 use a recognition-recall paradigm that manipulated facial-inversion and spatial frequency to show that people rely upon face-typical processing less when they perceive norm violators' faces. Study 3 uses a facial composite task to demonstrate that the effect is actor dependent, not action dependent, and to suggest that configural processing is the mechanism of perceptual change. Studies 4 and 5 use offset faces to show that configural processing is only attenuated when they belong to perpetrators who are culpable. Studies 6 and 7 show that people find it easier to punish inverted faces and harder to punish faces displayed in low spatial frequency. Taken together, these data suggest a bidirectional flow of causality between lower-order perceptual and higher-order cognitive processes in norm enforcement. PsycINFO Database Record (c) 2016 APA, all rights reserved.

The Helsinki Face Transplantation: Surgical aspects and 1-year outcome.

PubMed

Lassus, Patrik; Lindford, Andrew; Vuola, Jyrki; Bäck, Leif; Suominen, Sinikka; Mesimäki, Karri; Wilkman, Tommy; Ylä-Kotola, Tuija; Tukiainen, Erkki; Kuokkanen, Hannu; Törnwall, Jyrki

2018-02-01

Since 2005, at least 38 facial transplantations have been performed worldwide. We herein describe the surgical technique and 1-year clinical outcome in Finland's first face transplant case. A 34-year-old male who had a severe facial deformity following ballistic trauma in 1999 underwent facial transplantation at the Helsinki University Hospital on 8th February 2016. Three-dimensional (3D) technology was used to manufacture donor and recipient patient-specific osteotomy guides and a donor face mask. The facial transplant consisted of a Le Fort II maxilla, central mandible, lower ⅔ of the midface muscles, facial and neck skin, oral mucosa, anterior tongue and floor of mouth muscles, facial nerve (three bilateral branches), and bilateral hypoglossal and buccal nerves. At 1-year follow-up, there have thus far been no clinical or histological signs of rejection. The patient has a good aesthetic outcome with symmetrical restoration of the mobile central part of the face, with recovery of pain and light touch sensation to almost the entire facial skin and intraoral mucosa. Electromyography at 1 year has confirmed symmetrical muscle activity in the floor of the mouth and facial musculature, and the patient is able to produce spontaneous smile. Successful social and psychological outcome has also been observed. Postoperative complications requiring intervention included early (nasopalatinal fistula, submandibular sialocele, temporomandibular joint pain and transient type 2 diabetes) and late (intraoral wound and fungal infection, renal impairment and hypertension) complications. At 1 year, we report an overall good functional outcome in Finland's first face transplant. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Design and Performance Improvements of the Prototype Open Core Flywheel Energy Storage System

NASA Technical Reports Server (NTRS)

Pang, D.; Anand, D. K. (Editor); Kirk, J. A. (Editor)

1996-01-01

A prototype magnetically suspended composite flywheel energy storage (FES) system is operating at the University of Maryland. This system, designed for spacecraft applications, incorporates recent advances in the technologies of composite materials, magnetic suspension, and permanent magnet brushless motor/generator. The current system is referred to as an Open Core Composite Flywheel (OCCF) energy storage system. This paper will present design improvements for enhanced and robust performance. Initially, when the OCCF prototype was spun above its first critical frequency of 4,500 RPM, the rotor movement would exceed the space available in the magnetic suspension gap and touchdown on the backup mechanical bearings would occur. On some occasions it was observed that, after touchdown, the rotor was unable to re-suspend as the speed decreased. Additionally, it was observed that the rotor would exhibit unstable oscillations when the control system was initially turned on. Our analysis suggested that the following problems existed: (1) The linear operating range of the magnetic bearings was limited due to electrical and magnetic saturation; (2) The inductance of the magnetic bearings was affecting the transient response of the system; (3) The flywheel was confined to a small movement because mechanical components could not be held to a tight tolerance; and (4) The location of the touchdown bearing magnifies the motion at the pole faces of the magnetic bearings when the linear range is crucial. In order to correct these problems an improved design of the flywheel energy storage system was undertaken. The magnetic bearings were re-designed to achieve a large linear operating range and to withstand load disturbances of at least 1 g. The external position transducers were replaced by a unique design which were resistant to magnetic field noise and allowed cancellation of the radial growth of the flywheel at high speeds. A central rod was utilized to ensure the concentricity of the magnetic bearings, the motor/generator, and the mechanical touchdown bearings. In addition, the mechanical touchdown bearings were placed at two ends of the magnetic bearing stack to restrict the motion at pole faces. A composite flywheel was made using a multi-ring interference assembled design for a high specific energy density. To achieve a higher speed and better efficiency, a permanent magnet DC brushless motor was specially designed and fabricated. A vacuum enclosure was constructed to eliminate windage losses for testing at high speeds. With the new improvements the OCCF system was tested to 20,000 RPM with a total stored energy of 15.9 WH and an angular momentum of 54.8 N-m-s (40.4 lb-ft-s). Motor current limitation, caused by power loss in the magnetic bearings, was identified as causing the limit in upper operating speed.

Species composition of developing Central Appalachian hardwood stands following clearcutting

Treesearch

Lance A. Vickers; Thomas Fox

2015-01-01

This study examined the species composition of 47 paired stands on submesic sites on the Appalachian Plateau of West Virginia. Paired stands consisted of a mature stand adjacent to a young clearcut that was

Identification and Classification of Facial Familiarity in Directed Lying: An ERP Study

PubMed Central

Sun, Delin; Chan, Chetwyn C. H.; Lee, Tatia M. C.

2012-01-01

Recognizing familiar faces is essential to social functioning, but little is known about how people identify human faces and classify them in terms of familiarity. Face identification involves discriminating familiar faces from unfamiliar faces, whereas face classification involves making an intentional decision to classify faces as “familiar” or “unfamiliar.” This study used a directed-lying task to explore the differentiation between identification and classification processes involved in the recognition of familiar faces. To explore this issue, the participants in this study were shown familiar and unfamiliar faces. They responded to these faces (i.e., as familiar or unfamiliar) in accordance with the instructions they were given (i.e., to lie or to tell the truth) while their EEG activity was recorded. Familiar faces (regardless of lying vs. truth) elicited significantly less negative-going N400f in the middle and right parietal and temporal regions than unfamiliar faces. Regardless of their actual familiarity, the faces that the participants classified as “familiar” elicited more negative-going N400f in the central and right temporal regions than those classified as “unfamiliar.” The P600 was related primarily with the facial identification process. Familiar faces (regardless of lying vs. truth) elicited more positive-going P600f in the middle parietal and middle occipital regions. The results suggest that N400f and P600f play different roles in the processes involved in facial recognition. The N400f appears to be associated with both the identification (judgment of familiarity) and classification of faces, while it is likely that the P600f is only associated with the identification process (recollection of facial information). Future studies should use different experimental paradigms to validate the generalizability of the results of this study. PMID:22363597

A Method for En Face OCT Imaging of Subretinal Fluid in Age-Related Macular Degeneration

PubMed Central

Mohammad, Fatimah; Wanek, Justin; Zelkha, Ruth; Lim, Jennifer I.; Chen, Judy; Shahidi, Mahnaz

2014-01-01

Purpose. The purpose of the study is to report a method for en face imaging of subretinal fluid (SRF) due to age-related macular degeneration (AMD) based on spectral domain optical coherence tomography (SDOCT). Methods. High density SDOCT imaging was performed at two visits in 4 subjects with neovascular AMD and one healthy subject. En face OCT images of a retinal layer anterior to the retinal pigment epithelium were generated. Validity, repeatability, and utility of the method were established. Results. En face OCT images generated by manual and automatic segmentation were nearly indistinguishable and displayed similar regions of SRF. En face OCT images displayed uniform intensities and similar retinal vascular patterns in a healthy subject, while the size and appearance of a hypopigmented fibrotic scar in an AMD subject were similar at 2 visits. In AMD subjects, dark regions on en face OCT images corresponded to reduced or absent light reflectance due to SRF. On en face OCT images, a decrease in SRF areas with treatment was demonstrated and this corresponded with a reduction in the central subfield retinal thickness. Conclusion. En face OCT imaging is a promising tool for visualization and monitoring of SRF area due to disease progression and treatment. PMID:25478209

Identity-expression interaction in face perception: sex, visual field, and psychophysical factors.

PubMed

Godard, Ornella; Baudouin, Jean-Yves; Bonnet, Philippe; Fiori, Nicole

2013-01-01

We investigated the psychophysical factors underlying the identity-emotion interaction in face perception. Visual field and sex were also taken into account. Participants had to judge whether a probe face, presented in either the left or the right visual field, and a central target face belonging to same person while emotional expression varied (Experiment 1) or to judge whether probe and target faces expressed the same emotion while identity was manipulated (Experiment 2). For accuracy we replicated the mutual facilitation effect between identity and emotion; no sex or hemispheric differences were found. Processing speed measurements, however, showed a lesser degree of interference in women than in men, especially for matching identity when faces expressed different emotions after a left visual presentation probe face. Psychophysical indices can be used to determine whether these effects are perceptual (A') or instead arise at a post-perceptual decision-making stage (B"). The influence of identity on the processing of facial emotion seems to be due to perceptual factors, whereas the influence of emotion changes on identity processing seems to be related to decisional factors. In addition, men seem to be more "conservative" after a LVF/RH probe-face presentation when processing identity. Women seem to benefit from better abilities to extract facial invariant aspects relative to identity.

Long-term trends in climate and hydrology in an agricultural headwater watershed of central Pennsylvania, USA

Treesearch

Ray B. Bryant; Haiming Lu; Kyle R. Elkin; Anthony R. Buda; Amy S. Collick; Gordon J. Folmar; Peter J. Kleinman

2016-01-01

Climate change has emerged as a key issue facing agriculture and water resources in the US. Long-term (1968-2012) temperature, precipitation and streamflow data from a small (7.3 km2) watershed in east-central Pennsylvania was used to examine climatic and hydrologic trends in the context of recent climate change. Annual mean temperatures increased 0.38°C per decade,...