Science.gov

Sample records for central-station nuclear cogeneration

  1. Central station market development strategies for photovoltaics

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Federal market development strategies designed to accelerate the market penetration of central station applications of photovoltaic energy system are analyzed. Since no specific goals were set for the commercialization of central station applications, strategic principles are explored which, when coupled with specific objectives for central stations, can produce a market development implementation plan. The study includes (1) background information on the National Photovoltaic Program, photovoltaic technology, and central stations; (2) a brief market assessment; (3) a discussion of the viewpoints of the electric utility industry with respect to solar energy; (4) a discussion of commercialization issues; and (5) strategy principles. It is recommended that a set of specific goals and objectives be defined for the photovoltaic central station program, and that these goals and objectives evolve into an implementation plan that identifies the appropriate federal role.

  2. Integration of Biorefineries and Nuclear Cogeneration Power Plants - A Preliminary Analysis

    SciTech Connect

    Greene, Sherrell R; Flanagan, George F; Borole, Abhijeet P

    2009-03-01

    Biomass-based ethanol and nuclear power are two viable elements in the path to U.S. energy independence. Numerous studies suggest nuclear power could provide a practical carbon-free heat source alternative for the production of biomass-based ethanol. In order for this coupling to occur, it is necessary to examine the interfacial requirements of both nuclear power plants and bioethanol refineries. This report describes the proposed characteristics of a small cogeneration nuclear power plant, a biochemical process-based cellulosic bioethanol refinery, and a thermochemical process-based cellulosic biorefinery. Systemic and interfacial issues relating to the co-location of either type of bioethanol facility with a nuclear power plant are presented and discussed. Results indicate future co-location efforts will require a new optimized energy strategy focused on overcoming the interfacial challenges identified in the report.

  3. Qualification testing for a central station

    NASA Astrophysics Data System (ADS)

    Forrester, D. L.

    1983-11-01

    Qualification testing for a Central Station Photovoltaic (PV) Facility depends to a great extent on the system design, (fixed versus tracking), and the level of data acquisition/control which is incorporated into the system. The basic elements which require qualification tests include: dc power production/collection; tracker conversion systems; ac utility interface; system level control; and data acquisition/reporting. The qualification tests from the Lungo (ARCO) 1 MW Facility which were completed in January 1983 are discussed. The philosophy and many of the procedures are applicable to any central station PV facility.

  4. Central Station DHC Phase 1 feasibility

    SciTech Connect

    Henderson, H.L.

    1992-03-01

    This project assisted a private real estate developer in technically assessing the feasibility of integrating a central DHC system into a proposed 72 acre area mixed-use Planned Development (Central Station) just south of the Chicago Central Business District (Loop). The technical assessment concluded that a district heating and cooling system for Central Station will be feasible, provided that a major anchor load can be connected to the system. The system conceived for the site employs a modular approach that adjusts production capacity to actual load growth. The design concept includes gas-fired boilers for heating, gas turbine driven chillers for base loading, electric motor driven chillers for peaking, steam turbines for peak power and back pressure operation, and chilled water storage. Energy will be supplied to the users in the form of steam or low temperature hot water for heating, and low temperature chilled water for cooling.

  5. Next Generation Nuclear Plant Project Evaluation of Siting a HTGR Co-generation Plant on an Operating Commercial Nuclear Power Plant Site

    SciTech Connect

    L.E. Demick

    2011-10-01

    This paper summarizes an evaluation by the Idaho National Laboratory (INL) Next Generation Nuclear Plant (NGNP) Project of siting a High Temperature Gas-cooled Reactor (HTGR) plant on an existing nuclear plant site that is located in an area of significant industrial activity. This is a co-generation application in which the HTGR Plant will be supplying steam and electricity to one or more of the nearby industrial plants.

  6. Central-station applications: System and subsystem research activities

    NASA Technical Reports Server (NTRS)

    Jones, G. J.

    1982-01-01

    The results of a number of photovoltaic central power-station studies are summarized. Analysis based upon vendor quotes and construction contractor bids indicate that $50/m2 for area related costs for flat-plate arrays is achievable. Electrical design tradeoffs for multimegawatt systems are considered. The values of photovoltaic central-station plants for various regions are determined from an energy scenario effects study.

  7. 75 FR 5075 - Coalinga Cogeneration Company, Kern River Cogeneration Company, Mid-Set Cogeneration Company...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-01

    ...-612-000; ER10-611-000] Coalinga Cogeneration Company, Kern River Cogeneration Company, Mid-Set Cogeneration Company, Salinas River Cogeneration Company, Sargent Canyon Cogeneration Company, Sycamore Cogeneration Company; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for...

  8. Cogeneration Chicago style

    SciTech Connect

    Not Available

    1994-11-01

    This article examines how a malt producer incorporated cogeneration into its facility. The topics of the article include a review of the melting process, selection of operating cycle, selection of a building to house the cogeneration system, an overview of the heat recovery, electric, equipment protection, and integrated control systems, and hydrostatic cogeneration system enhancement.

  9. Industrial cogeneration optimization program

    SciTech Connect

    Not Available

    1980-01-01

    The purpose of this program was to identify up to 10 good near-term opportunities for cogeneration in 5 major energy-consuming industries which produce food, textiles, paper, chemicals, and refined petroleum; select, characterize, and optimize cogeneration systems for these identified opportunities to achieve maximum energy savings for minimum investment using currently available components of cogenerating systems; and to identify technical, institutional, and regulatory obstacles hindering the use of industrial cogeneration systems. The analysis methods used and results obtained are described. Plants with fuel demands from 100,000 Btu/h to 3 x 10/sup 6/ Btu/h were considered. It was concluded that the major impediments to industrial cogeneration are financial, e.g., high capital investment and high charges by electric utilities during short-term cogeneration facility outages. In the plants considered an average energy savings from cogeneration of 15 to 18% compared to separate generation of process steam and electric power was calculated. On a national basis for the 5 industries considered, this extrapolates to saving 1.3 to 1.6 quads per yr or between 630,000 to 750,000 bbl/d of oil. Properly applied, federal activity can do much to realize a substantial fraction of this potential by lowering the barriers to cogeneration and by stimulating wider implementation of this technology. (LCL)

  10. Biomass cogeneration. A business assessment

    SciTech Connect

    Skelton, J.C.

    1981-11-01

    This guide serves as an overview of the biomass cogeneration area and provides direction for more detailed analysis. The business assessment is based in part on discussions with key officials from firms that have adopted biomass cogeneration systems and from organizations such as utilities, state and federal agencies, and banks that would be directly involved in a biomass cogeneration project. The guide is organized into five chapters: biomass cogeneration systems, biomass cogeneration business considerations, biomass cogeneration economics, biomass cogeneration project planning, and case studies.

  11. 1985 EPRI cogeneration symposium. Proceedings

    SciTech Connect

    Limaye, D.R.

    1986-03-01

    In April 1985, EPRI sponsored a two-day Symposium on cogeneration to examine the major issues of current interest to utilities. The Symposium, held in San Diego, California, provided a forum for the review and exchange of information on the recent cogeneration experiences of utilities. Specific topics discussed included Cogeneration as a Utility Planning Option, Assessing Cogeneration Potential, Utility Participation in Cogeneration Ventures, and Negotiating Cogeneration Contracts. Some of the critical issues relative to cogeneration from the utility perspective were also explored in case studies, panel discussions, and question/answer sessions. A workshop on future research needs was also included.

  12. Power conditioning subsystems for photovoltaic central-station power plants - Technology and performance

    NASA Technical Reports Server (NTRS)

    Krauthamer, S.; Das, R.; Bulawka, A.

    1985-01-01

    Central-Station (CS) Photovoltaic (PV) systems have the potential of economically displacing significant amounts of centrally generated electricity. However, the technical viability and, to some extent, the economic viability of central-station PV generation technology will depend upon the availability of large power conditioners that are efficient, safe, reliable, and economical. This paper is an overview of the technical and cost requirements that must be met to develop economically viable power conditioning subsystems (PCS) for central-station power plants. The paper also examines various already commercially available PCS hardware that may be suitable for use in today's central PV power stations.

  13. Cogeneration in the former Soviet Union

    SciTech Connect

    Horak, W.C.

    1997-07-01

    The former Soviet Union made a major commitment to Cogeneration. The scale and nature of this commitment created a system conceptually different from Cogeneration in the west. The differences were both in scale, in political commitment, and in socio economic impact. This paper addresses some of the largest scale Cogeneration programs, the technology, and the residual impact of these programs. The integration of the Cogeneration and nuclear programs is a key focus of the paper. Soviet designed nuclear power plants were designed to produce both electricity and heat for residential and industrial uses. Energy systems used to implement this design approach are discussed. The significant dependence on these units for heat created an urgent need for continued operation during the winter. Electricity and heat are also produced in nuclear weapons production facilities, as well as power plants. The Soviets also had designed, and initiated construction of a number of nuclear power plants {open_quotes}ATETs{close_quotes} optimized for production of heat as well as electricity. These were canceled.

  14. Proceedings: 1986 EPRI cogeneration symposium

    SciTech Connect

    Limaye, D.R.

    1987-06-01

    On October 14-15, 1986, EPRI sponsored a Symposium on cogeneration to examine the major issues of current interest to utilities. The Symposium, held in Washington, DC, provided a forum for the review and exchange of information on the recent cogeneration experiences of utilities. Specific topics discussed were federal cogeneration regulations and their impacts on utilities, cogeneration trends and prospects, utility leadership in cogeneration ventures, strategic utility planning relative to cogeneration, small cogeneration: implications for utilities; and electric alternatives to cogeneration. Some of the critical issues relative to cogeneration from the utility perspective were explored in case studies, discussions and question/answer sessions. This report contains the 24 papers presented and discussed at the Symposium. They are processed separately for the data base.

  15. Central station applications planning activities and supporting studies. [application of photovoltaic technology to power generation plants

    NASA Technical Reports Server (NTRS)

    Leonard, S. L.; Siegel, B.

    1980-01-01

    The application of photovoltaic technology in central station (utility) power generation plants is considered. A program of data collection and analysis designed to provide additional information about the subset of the utility market that was identified as the initial target for photovoltaic penetration, the oil-dependent utilities (especially muncipals) of the U.S. Sunbelt, is described along with a series of interviews designed to ascertain utility industry opinions about the National Photovoltaic Program as it relates to central station applications.

  16. Cogeneration on a southeastern dairy

    SciTech Connect

    Ross, C.C.; Walsh, J.L.

    1987-01-01

    The results of a 5 year study on cogeneration on a dairy operation in Georgia are summarized. Details of system operation and performance are given. Discussion of practical and economic viability of a cogeneration system is provided.

  17. Cogeneration for resort hotels

    SciTech Connect

    Baker, T.D.

    1986-01-01

    Resort Hotels should be considered for application of co-generation to take advantage of higher thermal efficiency and consequent energy cost avoidance. Modern resort hotels require comfort and reliability from mechanical and electrical systems on an around the clock basis. Load profiling reveals simultaneous process heating and electricity use requirements that aid in the selection and sizing of co-generation equipment. Resort Hotel needs include electrical loads for lighting, fan motors, elevators, escalators and receptacle uses. Process heat demands arise from kitchen, servery, banquet, restaurant, laundry, and bakery functions. Once the loads requiring service have been quantified and realigned (shifted) to maximize simultaneous demands the engineering task of co-generation application becomes one of economics. National legislation is now in place to foster the use of co-generating central utility plants. Serving utility companies are now by law required to buy back excess energy during periods of reduced hotel demands. Resort Hotel loads, converted into electricity and heat demands are tabulated in terms of savings (positive cash flow) or costs (negative cash flows). Cash flow tabulations expressed in graphs are included. The graphs show the approximate simple payback on initial costs of co-generation systems based on varying electricity charges.

  18. Controlling cogeneration systems

    SciTech Connect

    Petro, J.

    1985-03-01

    The interest in cogeneration and peakshaving systems has grown rapidly as the cost of energy has driven large users to look to other means to supply their electrical demand more economically. Likewise, utilities faced with rising fuel costs and plants operating at near-full capacities are turning to cogenerators to reduce their peak demand loads. The federal government, through the Federal Energy Regulatory Commission, has promoted this situation by enacting rules that encourage cogeneration and remove obstacles that are deterring its use. It appears that in the 1980s, a larger percentage of onsite power installations are being decided on for economic reasons, rather than solely for the need for standby power. A review of recent cogeneration installations verifies this opinion, since they are being installed in places where standby power is not required nor would be considered in normal circumstances. Integral with the basic cogeneration and peak-shaving systems are the switchgear and its associated controls. Controls can range from the relatively basic ones for a manually-operated system to complex ones for a highlyautomated, highly-monitored system. No cookbook solution can determine the exact controls required for either of these types of applications. It remains the responsibility of the system designer to specify controls that are adequate.

  19. Next Generation Nuclear Plant Phenomena Identification and Ranking Tables (PIRTs) Volume 6: Process Heat and Hydrogen Co-Generation PIRTs

    SciTech Connect

    Forsberg, Charles W; Gorensek, M. B.; Herring, S.; Pickard, P.

    2008-03-01

    A Phenomena Identification and Ranking Table (PIRT) exercise was conducted to identify potential safety-0-related physical phenomena for the Next Generation Nuclear Plant (NGNP) when coupled to a hydrogen production or similar chemical plant. The NGNP is a very high-temperature reactor (VHTR) with the design goal to produce high-temperature heat and electricity for nearby chemical plants. Because high-temperature heat can only be transported limited distances, the two plants will be close to each other. One of the primary applications for the VHTR would be to supply heat and electricity for the production of hydrogen. There was no assessment of chemical plant safety challenges. The primary application of this PIRT is to support the safety analysis of the NGNP coupled one or more small hydrogen production pilot plants. However, the chemical plant processes to be coupled to the NGNP have not yet been chosen; thus, a broad PIRT assessment was conducted to scope alternative potential applications and test facilities associated with the NGNP. The hazards associated with various chemicals and methods to minimize risks from those hazards are well understood within the chemical industry. Much but not all of the information required to assure safe conditions (separation distance, relative elevation, berms) is known for a reactor coupled to a chemical plant. There is also some experience with nuclear plants in several countries that have produced steam for industrial applications. The specific characteristics of the chemical plant, site layout, and the maximum stored inventories of chemicals can provide the starting point for the safety assessments. While the panel identified events and phenomena of safety significance, there is one added caveat. Multiple high-temperature reactors provide safety-related experience and understanding of reactor safety. In contrast, there have been only limited safety studies of coupled chemical and nuclear plants. The work herein provides a

  20. SUNY Contracts for Cogeneration.

    ERIC Educational Resources Information Center

    Freeman, Laurie

    1996-01-01

    The State University of New York-Stony Brook forged a public-private partnership to fund a new plan for cogeneration, a two-step process that uses one fuel source--natural gas--to make two forms of energy. The agreement is designed to free the university from the need to make ongoing capital investment in its utility infrastructure. (MLF)

  1. Characterization of alternative electric generation technologies SPS comparative assessment. Volume 2: Central-station technologies

    NASA Astrophysics Data System (ADS)

    1980-08-01

    The cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives are described. The alternatives are: conventional coal-fired powerplants; conventional light water reactors; combined cycle powerplants with low-Btu gasifiers; liquid metal fast breeder reactors; photovoltaic systems without storage; and fusion reactors.

  2. Cogeneration computer model assessment: Advanced cogeneration research study

    NASA Technical Reports Server (NTRS)

    Rosenberg, L.

    1983-01-01

    Cogeneration computer simulation models to recommend the most desirable models or their components for use by the Southern California Edison Company (SCE) in evaluating potential cogeneration projects was assessed. Existing cogeneration modeling capabilities are described, preferred models are identified, and an approach to the development of a code which will best satisfy SCE requirements is recommended. Five models (CELCAP, COGEN 2, CPA, DEUS, and OASIS) are recommended for further consideration.

  3. Fuel cell cogeneration

    SciTech Connect

    Wimer, J.G.; Archer, D.

    1995-08-01

    The U.S. Department of Energy`s Morgantown Energy Technology Center (METC) sponsors the research and development of engineered systems which utilize domestic fuel supplies while achieving high standards of efficiency, economy, and environmental performance. Fuel cell systems are among the promising electric power generation systems that METC is currently developing. Buildings account for 36 percent of U.S. primary energy consumption. Cogeneration systems for commercial buildings represent an early market opportunity for fuel cells. Seventeen percent of all commercial buildings are office buildings, and large office buildings are projected to be one of the biggest, fastest-growing sectors in the commercial building cogeneration market. The main objective of this study is to explore the early market opportunity for fuel cells in large office buildings and determine the conditions in which they can compete with alternative systems. Some preliminary results and conclusions are presented, although the study is still in progress.

  4. Cogeneration in large complexes

    SciTech Connect

    Kovacik, J.M.; Franklin, J.C.

    1982-02-01

    Power cogeneration in large chemical plants producing sulfuric acid and phosphate fertilizers is covered. In these plants, a large quantity of ''by-product steam'' is generated which can be expanded prior to extraction for process use. Steam generated in excess of process needs can be expanded through the steam turbine to a condenser. The combination of a sulfuric acid production facility with a phosphate complex producing wet process phosphoric acid and diammonium phosphate provides a unique opportunity for cogeneration. The exothermic oxidation reactions in the production of sulfuric (or nitric) acid provide the thermal energy for ''by-product'' steam production at elevated steam conditions. Expanding the steam generated in an automatic extraction, condensing steam turbine-generator permits power generation without any incremental fuel requirement in the process plant. Furthermore, steam demands for the phosphate complex for evaporators, vaporizers and other uses would be extracted from the steam turbine-generator. Many of the practical energy systems as well as hardware considerations have been briefly discussed. The data and examples presented illustrate the attractive economics and operational flexibility which are available through use of these cogeneration systems.

  5. Determination of hot-spot susceptibility of multistring photovoltaic modules in a central-station application

    NASA Technical Reports Server (NTRS)

    Gonzalez, C. C.; Weaver, R. W.; Ross, R. G., Jr.; Spencer, R.; Arnett, J. C.

    1984-01-01

    Part of the effort of the Jet Propulsion Laboratory (JPL) Flat-Plate Solar Array Project (FSA) includes a program to improve module and array reliability. A collaborative activity with industry dealing with the problem of hot-spot heating due to the shadowing of photovoltaic cells in modules and arrays containing several paralleled cell strings is described. The use of multiparallel strings in large central-station arrays introduces the likelihood of unequal current sharing and increased heating levels. Test results that relate power dissipated, current imbalance, cross-strapping frequency, and shadow configuration to hot-spot heating levels are presented. Recommendations for circuit design configurations appropriate to central-station applications that reduce the risk of hot-spot problems are offered. Guidelines are provided for developing hot-spot tests for arrays when current imbalance is a threat.

  6. Shadowing on Apollo 12 Solar Cells and Possible Movement of the ALSEP Central Station

    NASA Technical Reports Server (NTRS)

    Berman, Paul A.; Williams, David R.

    2014-01-01

    A fortuitous arrangement of a west-facing solar cell and a bracket on the Apollo 12 ALSEP (Apollo Lunar Surface Experiments Package) has allowed us to precisely determine the relative position of the Sun near sunset relative to the Apollo 12 central station over a period of nearly 8 years. The small bracket, mounted on the central station due west of the cell, casts a shadow on the cell near sunset, decreasing the output of the cell proportional to the area of shadow covering the cell. The pattern of shadowing by the bracket gives good agreement with the known change of solar azimuth on a yearly timescale, but the pattern gradually but constantly changed from year-to-year, in a manner inconsistent with the known and changing position of the Sun.

  7. Coal and its applications to cogeneration

    SciTech Connect

    Gartner, R.R.; Dyer, R.B.

    1983-11-01

    This paper presents an overall review of cogeneration. This review covers technical and regulatory aspects of cogeneration as well as ownership and financing options which may be available. The intent of the paper is to update the status of cogeneration and compile some of the available information into a general review which will be of value to individuals involved in decisions related to cogeneration.

  8. Bronx Zoo cogeneration project

    SciTech Connect

    Rivet, P.H.

    1988-09-01

    The New York Zoological Society commenced feasibility studies for a proposed cogeneration and district heating system for the Bronz Zoo in spring 1982. Early studies focused on evaluating the Zoo's energy loads, infrastructure, and energy delivery and financing systems. The Zoological Society and New York City joined in the decision to support the construction of a system which would serve not only the Bronx Zoo but also five nearby City-funded installations, including the adjacent New York Botanical Garden. Since the submission of that study, the project has been modified in scope, scaling back to a generating capacity designed to serve only the Bronz Zoo.

  9. Advanced cogeneration research study. Survey of cogeneration potential

    NASA Technical Reports Server (NTRS)

    Slonski, M. L.

    1983-01-01

    Fifty-five facilities that consumed substantial amounts of electricity, natural gas, or fuel oil were surveyed by telephone in 1983. The primary objective of the survey was to estimate the potential electricity that could be generated in the SCE service territory using cogeneration technology. An estimated 3667 MW sub e could potentially be generated using cogenerated technology. Of this total, current technology could provide 2569 MW sub p and advanced technology could provide 1098 MW sub e. Approximately 1611 MW sub t was considered not feasible to produce electricity with either current or advanced cogeneration technology.

  10. Cogeneration for hospitals

    SciTech Connect

    Not Available

    1985-01-01

    With health care costs on the rise, hospitals are looking for ways to reduce operating expenses-especially utility bills. But hospitals, more than anyone else, need a continuous source of electricity, heating and air conditioning. They cannot turn off medical equipment or climate control systems in the name of energy conservation. Hospital Corporation of America (HCA), with the help of the Gas Research Institute (GRI), has found a way to supply affordable and efficient power to a mid-size hospital in Houston, Texas. A 500-kilowatt (kw) gasfired cogeneration system, sold as a package, is now being field-tested at the Medical Center Del Oro, a 258-bed hospital facility. The cogeneration system, which began operating last month, will supply the medical center with 145 tons of cooling (or 2.3 MMBtu/hour space heating) and 500,000 Btu/hour for water heating, in addition to the 500 kw of electricity. A Caterpillar continuous-duty turbocharged gas-fueled engine serves as the prime mover, and heat is recovered from its exhaust and from water used to cool the engine. A Trane single-effect absorption chiller supplies chilled water for air conditioning the hospital.

  11. Economically dispatching cogeneration facilities

    SciTech Connect

    Hernandez, E.

    1996-05-01

    Economic dispatching has been used by utilities to meet the energy demands of their customers for decades. The objective was to first load those units which cost the least to run and slowly increase the loading of more expensive units as the incremental energy price increased. Although this concept worked well for utility based systems where incremental costs rose with peak demand, the independent power producers(IPPs) and the power purchase agreements (PPAs) have drastically changed this notion. Most PPAs structured for the IPP environment have negotiated rates which remain the same during peak periods and base their electrical generation on specific process steam requirements. They also must maintain the required production balance of process steam and electrical load in order to qualify as a Public Utility Regulatory Policies Act (PURPA) facility. Consequently, economically dispatching Cogeneration facilities becomes an exercise in adhering to contractual guidelines while operating the equipment in the most efficient manner possible for the given condition. How then is it possible to dispatch a Cogeneration facility that maintains the electrical load demand of JFK Airport while satisfying all of its heating and cooling needs? Contractually, Kennedy International Airport Cogen (KIAC) has specific obligations concerning electrical and thermal energy exported to JFK Airport. The facility`s impressive array of heating and cooling apparatuses together with the newly installed cogen fulfilled the airport`s needs by utilizing an endless combination of new and previously installed equipment. Moreover, in order to economically operate the plant a well structured operating curriculum was necessary.

  12. Cogeneration improves thermal EOR efficiency

    SciTech Connect

    Western, E.R. ); Nass, D.W. )

    1990-10-01

    This paper reports that the successful completion and operation of a cogeneration plant is a prime example of the multi-faceted use of cogeneration. Through high-efficiency operation, significant energy is saved by combining the two process of steam and electrical production. The 225-megawatt (mw) cogeneration plant provides 1,215 million lb/hr of steam for thermally enhanced oil recovery (TEOR) at the Midway-Sunset oil field in south-central California. Overall pollutant emissions as well as total electric and steam production costs have been reduced. The area's biological resources also have been protected.

  13. Selection of alternative central-station technologies for the Satellite Power System (SPS) comparative assessment

    NASA Technical Reports Server (NTRS)

    Samsa, M.

    1980-01-01

    An important effort is the Satellite Power System (SPS) comparative Assessment is the selection and characterization of alternative technologies to be compared with the SPS concept. The ground rules, criteria, and screening procedure applied in the selection of those alternative technologies are summarized. The final set of central station alternatives selected for comparison with the SPS concept includes: (1) light water reactor with improved fuel utilization, (2) conventional coal combustion with improved environmental controls, (3) open cycle gas turbine with integral low Btu gasifier, (4) terrestrial photovoltaic, (5) liquid metal fast breeder reactor, and (6) magnetic confinement fusion.

  14. HTGR-GT closed-cycle gas turbine. A plant concept with inherent cogeneration, power plus heat production, capability

    NASA Astrophysics Data System (ADS)

    McDonald, C. F.

    1980-04-01

    The high grade sensible heat rejection characteristic of the high temperature gas cooled reactor gas turbine plant is suited to cogeneration. Cogeneration broadly covers combined power and heat operation modes. Cogeneration in this nuclear closed cycle plant includes: (1) bottoming Rankine cycle, (2) hot water or process steam production, (3) desalination, and (4) urban and industrial district heating. The HTGR-CT plant thermodynamic cycles, design features, and potential applications for the cogeneration operation modes are discussed. The HTGR-CT plant, which potentially approaches 50 percent overall efficiency in a combined cycle mode, can significantly aid national energy goals, particularly resource conservation.

  15. Cogeneration: A Campus Option? A Cogeneration Manual for Colleges and Universities.

    ERIC Educational Resources Information Center

    Goble, Robert Lloyd; Goble, Wendy Coleman

    Guidelines for colleges who may want to implement cogeneration on their campuses are presented. Cogeneration has been defined as "the simultaneous production of electric power and other forms of useful energy--such as heat or process steam--from the same facility." The history of cogeneration, current and future technologies, and cogeneration and…

  16. Industrial cogeneration dealing with power pricing changes

    SciTech Connect

    Tennant, J.B.

    1986-01-01

    Since 1978, with the passage of the Public Utilities Regulatory Policy Act (PURPA) and with increasing utility retail rates, cogeneration of electrical power by industry has become possible and economically attractive. The State of Florida undertook the task of implementing the intent of PURPA through a series of workshops, regulatory hearings, and orders starting in 1980 and continuing today. However, current and potential cogenerators face uncertainties about power pricing and backup power rates that make cogeneration, in many cases, too risky for the business climate of the 1980s. The industrial cogenerator must deal with a public utility concerning power pricing without any leverage, except Public Service Commission Rulings. Therefore, the cogenerator must be capable of adapting its operation to the changing pricing situation to optimize the value of the cogeneration. This paper provides insight into how USS Agri-Chemicals, an industrial cogenerator in the State of Florida, has adapted its cogeneration to the changing public utility power pricing.

  17. Advanced Cogeneration Technology Economic Optimization Study (ACTEOS)

    NASA Technical Reports Server (NTRS)

    Nanda, P.; Ansu, Y.; Manuel, E. H., Jr.; Price, W. G., Jr.

    1980-01-01

    The advanced cogeneration technology economic optimization study (ACTEOS) was undertaken to extend the results of the cogeneration technology alternatives study (CTAS). Cost comparisons were made between designs involving advanced cogeneration technologies and designs involving either conventional cogeneration technologies or not involving cogeneration. For the specific equipment cost and fuel price assumptions made, it was found that: (1) coal based cogeneration systems offered appreciable cost savings over the no cogeneration case, while systems using coal derived liquids offered no costs savings; and (2) the advanced cogeneration systems provided somewhat larger cost savings than the conventional systems. Among the issues considered in the study included: (1) temporal variations in steam and electric demands; (2) requirements for reliability/standby capacity; (3) availability of discrete equipment sizes; (4) regional variations in fuel and electricity prices; (5) off design system performance; and (6) separate demand and energy charges for purchased electricity.

  18. System studies of coal fired-closed cycle MHD for central station power plants

    NASA Technical Reports Server (NTRS)

    Zauderer, B.

    1976-01-01

    This paper presents a discussion of the closed-cycle MHD results obtained in a recent study of various advanced energy-conversion power systems. The direct coal-fired MHD topping-steam bottoming cycle was established as the current choice for central station power generation. Emphasis is placed on the background assumptions and the conclusions that can be drawn from the closed-cycle MHD analysis. It is concluded that closed-cycle MHD has efficiencies comparable to that of open-cycle MHD. Its cost will possibly be slightly higher than that of the open-cycle MHD system. Also, with reasonable fuel escalation assumptions, both systems can produce lower-cost electricity than conventional steam power plants. Suggestions for further work in closed-cycle MHD components and systems are made.

  19. Staff Draft Report. Comparative Cost of California Central Station Electricity Generation Technologies.

    SciTech Connect

    Badr, Magdy; Benjamin, Richard

    2003-02-11

    This Energy Commission staff draft report presents preliminary levelized cost estimates for several generic central-station electricity generation technologies. California has traditionally adopted energy policies that balance the goals of supporting economic development, improving environmental quality and promoting resource diversity. In order to be effective, such policies must be based on comprehensive and timely gathering of information. With this goal in mind, the purpose of the report is to provide comparative levelized cost estimates for a set of renewable (e.g., solar) and nonrenewable (e.g., natural gas-fired) central-station electricity generation resources, based on each technology's operation and capital cost. Decision-makers and others can use this information to compare the generic cost to build specific technology. These costs are not site specific. If a developer builds a specific power plant at a specific location, the cost of siting that plant at that specific location must be considered. The Energy Commission staff also identifies the type of fuel used by each technology and a description of the manner in which the technology operates in the generation system. The target audiences of this report are both policy-makers and anyone wishing to understand some of the fundamental attributes that are generally considered when evaluating the cost of building and operating different electricity generation technology resources. These costs do not reflect the total cost to consumers of adding these technologies to a resources portfolio. These technology characterizations do not capture all of the system, environmental or other relevant attributes that would typically be needed by a portfolio manager to conduct a comprehensive ''comparative value analysis''. A portfolio analysis will vary depending on the particular criteria and measurement goals of each study. For example, some form of firm capacity is typically needed with wind generation to support

  20. Wastewater treatment plant cogeneration options

    SciTech Connect

    Stringfield, J.G.

    1995-12-31

    This paper reviews municipal sewage cogeneration and digester gas utilization options available to wastewater treatment plants, and will focus on utilizing the digester gas in combustion turbines and engine-generator systems. Defining the digestion and gas generation process is crucial to understanding the best gas utilization system. In municipal wastewater treatment plants biosolids (sludge) reduction is accomplished using aerobic or anaerobic digestion. The basic process of treating sewage solids with digestion is not new and has been practiced as far back as the nineteenth century. High energy usage consumed by aerobic blow systems supplying air to the process and the potential ``free`` energy generated by anaerobic digesters sometimes sways designers to select anaerobic over aerobic digestion. The following areas will be covered in this paper: gas utilization and cogeneration; definition of digestion process; sizing the cogeneration system and reviewing the systems components; emissions requirements and options; and capital, and O and M cost analysis.

  1. System studies of coal fired-closed cycle MHD for central station power plants

    NASA Technical Reports Server (NTRS)

    Zauderer, B.

    1976-01-01

    This paper presents a discussion of the closed cycle MHD results obtained in a recent study of various advanced energy conversion (ECAS) power systems. The study was part of the first phase of this ECAS study. Since this was the first opportunity to evaluate the coal fired closed cycle MHD system, a number of iterations were required to partially optimize the system. The present paper deals with the latter part of the study in which the direct coal fired, MHD topping-steam bottoming cycle was established as the current choice for central station power generation. The emphasis of the paper is on the background assumptions and the conclusions that can be drawn from the closed cycle MHD analysis. The author concludes that closed cycle MHD has efficiencies comparable to that of open cycle MHD and that both systems are considerably more efficient than the other system studies in Phase 1 of the GE ECAS. Its cost will possibly be slightly higher than that of the open cycle MHD system. Also, with reasonable fuel escalation assumptions, both systems can produce lower cost electricity than conventional steam power plants. Suggestions for further work in closed cycle MHD components and systems is made.

  2. Advanced cogeneration research study: Executive summary

    NASA Technical Reports Server (NTRS)

    Bluhm, S. A.; Moore, N.; Rosenberg, L.; Slonski, M.

    1983-01-01

    This study provides a broad based overview of selected areas relevant to the development of a comprehensive Southern California Edison (SCE) advanced cogeneration project. The areas studied are: (1) Cogeneration potential in the SCE service territory; (2) Advanced cogeneration technologies; and (3) Existing cogeneration computer models. An estimated 3700 MW sub E could potentially be generated from existing industries in the Southern California Edison service territory using cogeneration technology. Of this total, current technology could provide 2600 MW sub E and advanced technology could provide 1100 MW sub E. The manufacturing sector (SIC Codes 20-39) was found to have the highest average potential for current cogeneration technology. The mining sector (SIC Codes 10-14) was found to have the highest potential for advanced technology.

  3. California plan sees glut developing in cogeneration

    SciTech Connect

    Poplett, J.

    1985-06-17

    If the California Public Utilities Commission accepts a finding by the California Energy Commission that the state has nearly all the cogeneration capacity it needs to meet baseload requirements, large cogenerators may have a harder time winning approval for large plants and small cogenerators may feel the effect in lower buyback rates. The state now has 16,000 MW of capacity produced by operating or authorized cogenerators. It estimates that only another 900 MW should be added to avoid having excess capacity. The Energy Commission only regulates plants of 50 MW or more and will likely ask applicants to demonstrate both the state's and the user's need for future projects.

  4. Potential for cogeneration in distillation. Final report

    SciTech Connect

    Mix, T.W.

    1983-02-01

    Distillation represents a major consumer of energy in the United States and is a good sump for a cogeneration facility because it represents a condensing load. The potential for cogeneration in the distillation industries (chemical plants and oil refineries) is evaluated based on discussions with knowledgeable individuals in major chemical and petroleum refining companies, in architect/engineer firms and in utilities,as well as on a review of the literature. The total potential for cogeneration in that time frame in which the price of gas and oil escalates to three to four times the price of coal is estimated as ranging from 2600 to 3750 MW in the petroleum refining industry, is estimated as 900 MW in the electrochemical industry, and as 2440 MW in the remainder of the chemical industry. Gas turbine/waste heat boiler cogeneration systems are projected as being installed in California, gas turbine with combined cycle systems are seen as being installed in the electrochemical industry, and coal-fired back-pressure steam turbine cogeneration systems are seen as being installed in the remainder of the chemical and petroleum refinery installations. The Texas Gulf coast area is seen as having the largest potential for cogeneration, but significant potential exists in California as well. Coal is seen as the dominant cogeneration fuel and the average cogeneration plant size is projected as large, with over 500,000 labs/hr of steam flow and more than 50 MW cogenerated electric power.

  5. Cogeneration for existing alfalfa processing

    SciTech Connect

    Not Available

    1984-01-01

    This study is designed to look at the application of gas-turbine generator cogeneration to a typical Nebraska alfalfa processing mill. The practicality is examined of installing a combustion turbine generator at a plant site and modifying existing facilities for generating electricity, utilizing the electricity generated, selling excess electricity to the power company and incorporating the turbine exhaust flow as a drying medium for the alfalfa. The results of this study are not conclusive but the findings are summarized.

  6. HTGR-GT closed-cycle gas turbine: a plant concept with inherent cogeneration (power plus heat production) capability

    SciTech Connect

    McDonald, C.F.

    1980-04-01

    The high-grade sensible heat rejection characteristic of the high-temperature gas-cooled reactor-gas turbine (HTGR-GT) plant is ideally suited to cogeneration. Cogeneration in this nuclear closed-cycle plant could include (1) bottoming Rankine cycle, (2) hot water or process steam production, (3) desalination, and (4) urban and industrial district heating. This paper discusses the HTGR-GT plant thermodynamic cycles, design features, and potential applications for the cogeneration operation modes. This paper concludes that the HTGR-GT plant, which can potentially approach a 50% overall efficiency in a combined cycle mode, can significantly aid national energy goals, particularly resource conservation.

  7. Intake-to-delivered-energy ratios for central station and distributed electricity generation in California

    NASA Astrophysics Data System (ADS)

    Heath, Garvin A.; Nazaroff, William W.

    In previous work, we showed that the intake fraction (iF) for nonreactive primary air pollutants was 20 times higher in central tendency for small-scale, urban-sited distributed electricity generation (DG) sources than for large-scale, central station (CS) power plants in California [Heath, G.A., Granvold, P.W., Hoats, A.S., Nazaroff, W.W., 2006. Intake fraction assessment of the air pollutant exposure implications of a shift toward distributed electricity generation. Atmospheric Environment 40, 7164-7177]. The present paper builds on that study, exploring pollutant- and technology-specific aspects of population inhalation exposure from electricity generation. We compare California's existing CS-based system to one that is more reliant on DG units sited in urban areas. We use Gaussian plume modeling and a GIS-based exposure analysis to assess 25 existing CSs and 11 DG sources hypothetically located in the downtowns of California's most populous cities. We consider population intake of three pollutants—PM 2.5, NO x and formaldehyde—directly emitted by five DG technologies—natural gas (NG)-fired turbines, NG internal combustion engines (ICE), NG microturbines, diesel ICEs, and fuel cells with on-site NG reformers. We also consider intake of these pollutants from existing CS facilities, most of which use large NG turbines, as well as from hypothetical facilities located at these same sites but meeting California's best-available control technology standards. After systematically exploring the sensitivity of iF to pollutant decay rate, the iFs for each of the three pollutants for all DG and CS cases are estimated. To efficiently compare the pollutant- and technology-specific exposure potential on an appropriate common basis, a new metric is introduced and evaluated: the intake-to-delivered-energy ratio (IDER). The IDER expresses the mass of pollutant inhaled by an exposed population owing to emissions from an electricity generation unit per quantity of electric

  8. Cogeneration development and market potential in China

    SciTech Connect

    Yang, F.; Levine, M.D.; Naeb, J.; Xin, D.

    1996-05-01

    China`s energy production is largely dependent on coal. China currently ranks third in global CO{sub 2} emissions, and rapid economic expansion is expected to raise emission levels even further in the coming decades. Cogeneration provides a cost-effective way of both utilizing limited energy resources and minimizing the environmental impacts from use of fossil fuels. However, in the last 10 years state investments for cogeneration projects in China have dropped by a factor of 4. This has prompted this study. Along with this in-depth analysis of China`s cogeneration policies and investment allocation is the speculation that advanced US technology and capital can assist in the continued growth of the cogeneration industry. This study provides the most current information available on cogeneration development and market potential in China.

  9. Gas turbine cogeneration principles and practice

    SciTech Connect

    Allen, R.P.; Kovacik, J.M.

    1984-06-01

    During the decade of the 1960s, industrial users recognized the gas turbine as a reliable prime mover for base load process applications. Gas turbine cogeneration systems were installed in various industries, including chemical, petroleum refining, pulp and paper, and metals. Typically, the size of the cogeneration system considered, and thus the gas turbine size, was governed by the internal heat and power demands of the specific plant. More recently, worldwide concern with regard to the cost and efficient use of energy is providing continuing opportunities for gas turbine cogeneration systems. In some locations, legislation is being enacted to encourage the development of cogeneration to the benefit of the public. This legislation can increase the number of alternative methods in which a cogeneration system can be developed. This paper will briefly review cogeneration principles applicable to the development of gas turbine energy supply systems. The wide range of conditions that can be satisfied using gas turbine cogeneration systems will be introduced. Brief discussions of recent installations are presented, illustrating the actual applications of some of these concepts.

  10. Gas turbine cogeneration principles and practice

    SciTech Connect

    Allen, R.P.; Kovacik, J.M.

    1984-10-01

    During the decade of the 1960s, industrial users recognized the gas turbine as a reliable prime mover for base load process applications. Gas turbine cogeneration systems were installed in various industries, including chemical, petroleum refining, pulp and paper, and metals. Typically, the size of the cogeneration system considered, and thus the gas turbine size, was governed by the internal heat and power demands of the specific plant. More recently, worldwide concern with regard to the cost and efficient use of energy is providing continuing opportunities for gas turbine cogeneration systems. In some locations, legislation is being enacted to encourage the development of cogeneration to the benefit of the public. This legislation can increase the number of alternative methods in which a cogeneration system can be developed. This paper will briefly review cogeneration principles applicable to the development of gas turbine energy supply systems. The wide range of conditions that can be satisfied using gas turbine cogeneration systems will be introduced. Brief discussions of recent installations are presented, illustrating the actual applications of some of these concepts.

  11. Power conditioning subsystems for photovoltaic central-station power plants - State-of-the-art and advanced technology

    NASA Technical Reports Server (NTRS)

    Bulawka, A.; Krauthamer, S.; Das, R.

    1986-01-01

    An overview is given of the technical and near-term cost requirements that must be met to develop economically viable power conditioning subsystems (PCS) for large-scale, central photovoltaic power stations. Various commercially available PCS hardware suitable for use in today's central photovoltaic power stations are also surveyed. Federal and industrial activities in the research and development of advanced PCSs that will contribute to the attainment of fully competitive, large-scale photovoltaic power stations are reviewed. The status of the DOE central station PCS program is discussed.

  12. Advanced technology cogeneration system conceptual design study: closed cycle gas turbines

    SciTech Connect

    Mock, E.A.T.; Daudet, H.C.

    1984-10-01

    The importance of the study results to the industrial sector can best be illustrated by a review and contemplation of the Task III results. The objective of Task III was to apply what was learned about steam and closed-cycle gas turbine cogeneration systems during Tasks I and II, on a site specific basis, to the much broader industrial sector as a whole. The Task III data shows that the industrial sector can benefit, and can afford to benefit, from the use of coal-fired cogeneration systems provided: (a) The industrial site is located in a DOE region that is not predominately based on cheap hydroelectric or nuclear utility power. (b) The specific site is based on using gas and/or oil as the separate generation boiler fuel. (c) The local utility will at least tolerate, or work with, the industrial cogenerator. (d) The industrial site has a minimum heat-to-power ratio of about 1.0 or the local utility will pay a fair price for the power exported from the industrial site. If all or most of the above conditions are met or approached, the industrial site owners should consider cogeneration. The steam cogeneration systems can provide the industrial owner an attractive return-on-equity and return-on-investment. However, the emerging technology of the closed cycle gas turbine shows a return-on-equity significantly better than that for the equivalent steam cogeneration system as shown in Figure 3. The significance of the Task I and Task II effort to the industrial sector is that these parts of the study verified the results of Task III by conducting a detailed cost and thermodynamic analysis on a selected industrial site cogeneration system.

  13. Thermal energy storage for cogeneration applications

    NASA Astrophysics Data System (ADS)

    Drost, M. K.; Antoniak, Z. I.

    1992-04-01

    Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be decoupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy's Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

  14. Thermal energy storage for cogeneration applications

    SciTech Connect

    Drost, M.K.; Antoniak, Z.I.

    1992-04-01

    Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be coupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy`s Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

  15. Thermal energy storage for cogeneration applications

    SciTech Connect

    Drost, M.K.; Antoniak, Z.I.

    1992-04-01

    Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be coupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy's Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

  16. Cogeneration at a residential complex

    SciTech Connect

    Not Available

    1981-10-01

    An energy cogeneration plant in a residential complex is described in which a 4 megawatts plant supplies 1000 apartments in seven buildings and a 60,000 ft/sup 2/ shopping center using diesel engine generators. The complex was retrofitted in that utility service was disconnected and all energy needs (heat, domestic hot water, electricity) are generated within the complex. Recovered heat from engine exhaust and jacket water is used to carry a portion of the buildings' thermal load. Steam is distributed from the central plant to each building. The total energy concept of the complex is described and energy savings are estimated ($300,000/y or 55%). Economics and financing of the project are described. The role of PURPA, standby equipment, automatic operation, and location of the power plant are discussed. Present and future savings in energy costs, tax benefits, and possible future sale of excess power to the utility are described. (MJJ)

  17. Cogeneration of water and power

    SciTech Connect

    Sephton, H.H.; Frank, K.F.

    1997-09-01

    Need of pure water in areas of limited supply has driven the development of technologies to permit recycling of available water and to generate new water supplies by purifying saline resources. These technologies include sedimentation, filtration, softening, ion exchange, electrodialysis, reverse osmosis and distillation. Some of these developments serve needs of the power industry, others evolved due to the synergistic relationship between generating water and power. Large plant seawater desalination depend on this synergism for best economy, especially in Southern California and the Middle East. Applying new processes promise to drive down the cost of desalinated water, based on recently improved thermal efficiencies and on capital cost reductions. Cogeneration with these processes provides new mutual benefits for power and water technologies.

  18. Cogeneration caps winery energy bills

    SciTech Connect

    Not Available

    1982-08-01

    At a time when energy demands and costs are becoming major considerations in the profitability of the winemaking business, Paul Masson solved its energy-cost squeeze by installing a natural-gas-fueled cogeneration plant that will save between $60,000 and $100,000 annually during the next 5 years. A Waukesha naturally aspirated, 6-cylinder P2895 engine with a 10:1 compression ratio is the heart of the winery's system. With the engine operating at 1200 rpm, the plant produces a 290 kW continuous rating with a standby output of 325 kW allowable for 8 hr of any 24 hr of operation. Utilizing the standby rating during cost of $360,000, payback comes in 2.5 years.

  19. Coal gasifier cogeneration powerplant project

    NASA Technical Reports Server (NTRS)

    Shure, L. I.; Bloomfield, H. S.

    1980-01-01

    Industrial cogeneration and utility pr systems were analyzed and a conceptual design study was conducted to evaluate the economic feasibility of a coal gasifier power plant for NASA Lewis Research Center. Site location, plant size, and electric power demand were considered in criteria developed for screening and selecting candidates that could use a wide variety of coals, including that from Ohio. A fluidized bed gasifier concept was chosen as the baseline design and key components of the powerplant were technically assessed. No barriers to environmental acceptability are foreseen. If funded, the powerplant will not only meet the needs of the research center, but will reduce the commercial risk for utilities and industries by fully verifying and demonstrating the technology, thus accelerating commercialization.

  20. Cogeneration Technology Alternatives Study (CTAS). Volume 5: Cogeneration systems results

    NASA Astrophysics Data System (ADS)

    Gerlaugh, H. E.; Hall, E. W.; Brown, D. H.; Priestley, R. R.; Knightly, W. F.

    1980-05-01

    The use of various advanced energy conversion systems is examined and compared with each other and with current technology systems for savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. The methodology and results of matching the cogeneration energy conversion systems to approximately 50 industrial processes are described. Results include fuel energy saved, levelized annual energy cost saved, return on investment, and operational factors relative to the noncogeneration base cases.

  1. Cogeneration Technology Alternatives Study (CTAS). Volume 5: Cogeneration systems results

    NASA Technical Reports Server (NTRS)

    Gerlaugh, H. E.; Hall, E. W.; Brown, D. H.; Priestley, R. R.; Knightly, W. F.

    1980-01-01

    The use of various advanced energy conversion systems is examined and compared with each other and with current technology systems for savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. The methodology and results of matching the cogeneration energy conversion systems to approximately 50 industrial processes are described. Results include fuel energy saved, levelized annual energy cost saved, return on investment, and operational factors relative to the noncogeneration base cases.

  2. Proceedings of the Flat-Plate Solar Array Project Research Forum on the Design of Flat-Plate Photovoltaic Arrays for Central Stations

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The Flat Plate Solar Array Project, focuses on advancing technologies relevant to the design and construction of megawatt level central station systems. Photovoltaic modules and arrays for flat plate central station or other large scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost effective configurations. Design, qualification and maintenance issues related to central station arrays derived from the engineering and operating experiences of early applications and parallel laboratory reserch activities are investigated. Technical issues are examined from the viewpoint of the utility engineer, architect/engineer and laboratory researcher. Topics on optimum source circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements, and array operation and maintenance are discussed.

  3. Proceedings of the Flat-Plate Solar Array Project Research Forum on the Design of Flat-Plate Photovoltaic Arrays for Central Stations

    NASA Astrophysics Data System (ADS)

    The Flat Plate Solar Array Project, focuses on advancing technologies relevant to the design and construction of megawatt level central station systems. Photovoltaic modules and arrays for flat plate central station or other large scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost effective configurations. Design, qualification and maintenance issues related to central station arrays derived from the engineering and operating experiences of early applications and parallel laboratory reserch activities are investigated. Technical issues are examined from the viewpoint of the utility engineer, architect/engineer and laboratory researcher. Topics on optimum source circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements, and array operation and maintenance are discussed.

  4. 78 FR 31916 - Yuma Cogeneration Associates; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-28

    ... Federal Energy Regulatory Commission Yuma Cogeneration Associates; Notice of Filing Take notice that on... Cogeneration Associates (Yuma Cogeneration) submitted a petition for a limited waiver of the efficiency standard in section 292.205(a)(2) of the Commission's regulations for a topping- cycle...

  5. Cogeneration-wave of the future

    SciTech Connect

    Stein, H.L.

    1983-03-01

    Cogeneration is a method for producing process steam or heat, together with electric power, which optimizes the use of the fuel input to obtain maximum energy output. Two classes of cogeneration, topping cycles, and bottoming cycles, are studied in this paper. When heat is a byproduct of an electrical generating system, it is called a topping cycle; when the electricity is a byproduct of a system's excess heat, it is a bottoming cycle. Three cogeneration plant types--reciprocating engine, gas turbine, and steam turbine--are compared. Gas turbines have a wide fuel flexibility, produce high heat output, and have low atmospheric pollution. Steam turbines have the greatest flexibility, are efficient at partial load, and have the highest heat output per unit of electricity. Rankine and Brayton steam cycles are the two most common bottoming cycles.

  6. Proceedings of the Flat-Plate Solar Array Project Research Forum on the design of flat-plate photovoltaic arrays for central stations

    SciTech Connect

    1983-01-01

    The Flat-Plate Solar Array Project, managed by the Jet Propulsion Laboratory for the US Department of Energy, has focused on advancing technologies relevant to the design and construction of megawatt-level central-station systems. Photovoltaic modules and arrays for flat-plate central-station or other large-scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost-effective configurations. The Central Station Research Forum addressed design, qualification and maintenance issues related to central-station arrays derived from the engineering and operating experiences of early applications and parallel laboratory research activities. Technical issues were examined from the viewpoint of the utility engineer, architect-engineer and laboratory researcher. The forum included presentations on optimum source-circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements and array operation and maintenance. The Research Forum focused on current capabilities as well as design difficulties requiring additional technological thrusts and/or continued research emphasis. Session topic summaries highlighting major points during group discussions, identifying promising technical approaches or areas of future research, are presented.

  7. Relative potentials of concentrating and two-axis tracking flat-plate photovoltaic arrays for central-station applications

    NASA Technical Reports Server (NTRS)

    Borden, C. S.; Schwartz, D. L.

    1984-01-01

    The purpose of this study is to assess the relative economic potentials of concenrating and two-axis tracking flat-plate photovoltaic arrays for central-station applications in the mid-1990's. Specific objectives of this study are to provide information on concentrator photovoltaic collector probabilistic price and efficiency levels to illustrate critical areas of R&D for concentrator cells and collectors, and to compare concentrator and flat-plate PV price and efficiency alternatives for several locations, based on their implied costs of energy. To deal with the uncertainties surrounding research and development activities in general, a probabilistic assessment of commercially achievable concentrator photovoltaic collector efficiencies and prices (at the factory loading dock) is performed. The results of this projection of concentrator photovoltaic technology are then compared with a previous flat-plate module price analysis (performed early in 1983). To focus this analysis on specific collector alternatives and their implied energy costs for different locations, similar two-axis tracking designs are assumed for both concentrator and flat-plate options.

  8. Micro cogeneration: roadblocks to mass markets

    SciTech Connect

    Ross, J.D.

    1987-09-01

    The market for micro cogeneration using units of 30 kW or less is in its infancy, and is currently limited to health care, recreation, lodging, and multi-unit residential facilities. There have been some inroads into the restaurant and fast food outlets, light industry, and some supermarkets. A mass market potential will require the industry to produce a module that is as generic as a home air conditioner or heat pump. In order for modular cogenerators to be look upon as appliances, they must be assembled as a package at the factory for easy installation and maintenance. Some utilities can create barriers to interconnections, which would have a negative effect on the market.

  9. Issues and challenges for Crockett Cogeneration project

    SciTech Connect

    Shah, G.H.; Roberts, R.G.; Stover, A.K.

    1996-10-01

    The Crockett Cogeneration project is owned by Crockett Cogeneration, a California limited partnership, of which Pacific Generation is a partner. The project is located in an industrial area dominated by the California and hawaiian (C and H) Sugar Refinery, a steel conveyor system, several large raw sugar storage bins and a flue gas stack for the existing C and H sugar facility. This paper describes the various challenges and the obstacles that the project had to successfully face. All of these issues listed below required proper planning, careful review of detailed sequencing of procurement and erection of structural steel, major equipment and the bulk commodities such as large and small piping, raceways and instrument tubing.

  10. Cogeneration facility audits for safety and performance

    SciTech Connect

    Calvert, W.; Byerly, K.

    1996-06-01

    Many organizations that operate cogeneration facilities have developed an internal review and audit process for detecting and correcting potential problems. The purpose in this is two-fold. First, to detect any safety problems that might harm equipment or personnel. And second, to operate the equipment at the highest possible performance and availability. The information in this article is not intended to qualify a facility for regulatory or safety compliance, but is presented as a typical example of the issues and programs involved for operating facilities. For operators that are interested in improving both the safety and performance of their cogeneration plant, this introduction to facility audits will be a starting point. It is important that management at each facility explain how identified problems are not directed at individual employees, but are addressed as a team effort. This will help ensure that problems are corrected in an appropriate and timely manner.

  11. Development of Residential SOFC Cogeneration System

    NASA Astrophysics Data System (ADS)

    Ono, Takashi; Miyachi, Itaru; Suzuki, Minoru; Higaki, Katsuki

    2011-06-01

    Since 2001 Kyocera has been developing 1kW class Solid Oxide Fuel Cell (SOFC) for power generation system. We have developed a cell, stack, module and system. Since 2004, Kyocera and Osaka Gas Co., Ltd. have been developed SOFC residential co-generation system. From 2007, we took part in the "Demonstrative Research on Solid Oxide Fuel Cells" Project conducted by New Energy Foundation (NEF). Total 57 units of 0.7kW class SOFC cogeneration systems had been installed at residential houses. In spite of residential small power demand, the actual electric efficiency was about 40%(netAC,LHV), and high CO2 reduction performance was achieved by these systems. Hereafter, new joint development, Osaka Gas, Toyota Motors, Kyocera and Aisin Seiki, aims early commercialization of residential SOFC CHP system.

  12. 18 CFR 292.205 - Criteria for qualifying cogeneration facilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Criteria for qualifying cogeneration facilities. 292.205 Section 292.205 Conservation of Power and Water Resources FEDERAL ENERGY... for topping-cycle facilities—(1) Operating standard. For any topping-cycle cogeneration facility,...

  13. 18 CFR 292.205 - Criteria for qualifying cogeneration facilities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Criteria for qualifying cogeneration facilities. 292.205 Section 292.205 Conservation of Power and Water Resources FEDERAL ENERGY... for topping-cycle facilities—(1) Operating standard. For any topping-cycle cogeneration facility,...

  14. 78 FR 43198 - Watson Cogeneration Company; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    ... Energy Regulatory Commission Watson Cogeneration Company; Notice of Filing Take notice that on July 12... Cogeneration Company filed an application requesting that the Commission direct (1) Southern California Edison...://www.ferc.gov , using the ``eLibrary'' link and is available for review in the Commission's...

  15. Industrial Cogeneration Optimization Program: A summary of two studies

    NASA Astrophysics Data System (ADS)

    1981-08-01

    Two industrial cogeneration optimization programs were performed to examine the economic and energy saving impacts of adding cogeneration to site specific plants in the chemical, food, pulp and paper, petroleum refining, and textile industries. Industrial cogeneration is reviewed. The two parallel ICOP studies are described. The five industrial sectors are also described, followed by highlights of each of the site specific case studies. Steam turbine cogeneration systems fired by coal or alternative fuels are generally the most attractive in terms of economic performance and oil/gas savings potential. Of the 15 cogeneration systems selected as optimum in the ICOP studies, 11 were coal or wood fired steam turbines. By contrast, gas turbines, combined cycles, and diesel engines, which are limited to oil or gas firing, are usually less economical.

  16. Efficient Use of Cogeneration and Fuel Diversification

    NASA Astrophysics Data System (ADS)

    Kunickis, M.; Balodis, M.; Sarma, U.; Cers, A.; Linkevics, O.

    2015-12-01

    Energy policy of the European Community is implemented by setting various goals in directives and developing support mechanisms to achieve them. However, very often these policies and legislation come into contradiction with each other, for example Directive 2009/28/EC on the promotion of the use of energy from renewable sources and Directive 2012/27/EU on energy efficiency, repealing Directive 2004/8/EC on the promotion of cogeneration based on a useful heat demand. In this paper, the authors attempt to assess the potential conflicts between policy political objectives to increase the share of high-efficiency co-generation and renewable energy sources (RES), based on the example of Riga district heating system (DHS). If a new heat source using biomass is built on the right bank of Riga DHS to increase the share of RES, the society could overpay for additional heat production capacities, such as a decrease in the loading of existing generating units, thereby contributing to an inefficient use of existing capacity. As a result, the following negative consequences may arise: 1) a decrease in primary energy savings (PES) from high-efficiency cogeneration in Riga DHS, 2) an increase in greenhouse gas (GHG) emissions in the Baltic region, 3) the worsening security situation of electricity supply in the Latvian power system, 4) an increase in the electricity market price in the Lithuanian and Latvian price areas of Nord Pool power exchange. Within the framework of the research, calculations of PES and GHG emission volumes have been performed for the existing situation and for the situation with heat source, using biomass. The effect of construction of biomass heat source on power capacity balances and Nord Pool electricity prices has been evaluated.

  17. Benefits of advanced technology in industrial cogeneration

    NASA Technical Reports Server (NTRS)

    Barna, G. J.; Burns, R. K.

    1979-01-01

    This broad study is aimed at identifying the most attractive advanced energy conversion systems for industrial cogeneration for the 1985 to 2000 time period and assessing the advantages of advanced technology systems compared to using today's commercially available technology. Energy conversion systems being studied include those using steam turbines, open cycle gas turbines, combined cycles, diesel engines, Stirling engines, closed cycle gas turbines, phosphoric acid and molten carbonate fuel cells and thermionics. Specific cases using today's commercially available technology are being included to serve as a baseline for assessing the advantages of advanced technology.

  18. Cogeneration at a milk processing facility

    SciTech Connect

    Jackowski, L.E. Jr.; Coles, R.L. )

    1988-01-01

    This paper describes the design aspects and operational considerations of a base loaded nominal 47MW combustion gas turbine heat recovery cogeneration plant located in Corona, California. The plant will sell electricity and steam to an adjacent milk processing facility and surplus electrical power to the local utility. The plant design incorporates a single General Electric PGLM5000 STIG aircraft derivative type natural gas fired combustion gas turbine with steam injection for nitrogen oxide (NO/sub chi/) suppression and power augmentation and a three pressure level head recovery boiler producing steam for use by the milk facility and the combustion gas turbine.

  19. Industrial cogeneration optimization program. Volume II. Appendix A. Conceptual designs and preliminary equipment specifications. Appendix B. Characterization of cogeneration systems (near-term technology). Appendix C. Optimized cogeneration systems

    SciTech Connect

    Not Available

    1980-01-01

    This appendix to a report which evaluates the technical, economic, and institutional aspects of industrial cogeneration for conserving energy in the food, chemical, textile, paper, and petroleum industries contains data, descriptions, and diagrams on conceptual designs and preliminary equipment specifications for cogeneration facilities; characterization of cogeneration systems in terms of fuel utilization, performance, air pollution control, thermal energy storage systems, and capital equipment costs; and optimized cogeneration systems for specific industrial plants. (LCL)

  20. Regional characteristics relevant to advanced technology cogeneration development. [industrial energy

    NASA Technical Reports Server (NTRS)

    Manvi, R.

    1981-01-01

    To assist DOE in establishing research and development funding priorities in the area of advanced energy conversion technoloy, researchers at the Jet Propulsion Laboratory studied those specific factors within various regions of the country that may influence cogeneration with advanced energy conversion systems. Regional characteristics of advanced technology cogeneration possibilities are discussed, with primary emphasis given to coal derived fuels. Factors considered for the study were regional industry concentration, purchased fuel and electricity prices, environmental constraints, and other data of interest to industrial cogeneration.

  1. Regional characteristics relevant to advanced technology cogeneration development

    NASA Astrophysics Data System (ADS)

    Manvi, R.

    1981-07-01

    To assist DOE in establishing research and development funding priorities in the area of advanced energy conversion technoloy, researchers at the Jet Propulsion Laboratory studied those specific factors within various regions of the country that may influence cogeneration with advanced energy conversion systems. Regional characteristics of advanced technology cogeneration possibilities are discussed, with primary emphasis given to coal derived fuels. Factors considered for the study were regional industry concentration, purchased fuel and electricity prices, environmental constraints, and other data of interest to industrial cogeneration.

  2. Gas glut spurring incentives, special deals for cogenerators

    SciTech Connect

    Pospisil, R.

    1984-06-25

    With an overabundance of natural gas on the market, a variety of incentives are available to industrial and commercial firms to use gas for cogeneration. These include special utility rates, equipment financing, feasibility studies, and lower-priced contract-carriage gas. Soaring electricity prices advanced in cogeneration equipment, and an easing of the Fuel Use Act are other factors making gas-fired cogeneration attractive. The article cites utilities offering financing incentives, but warns potential users to be wary of long-term contracts.

  3. Modular cogeneration in district heating and cooling systems

    SciTech Connect

    Andrews, J.W.; Aalto, P.; Gleason, T.C.J.; Skalafuris, A.J.

    1987-12-01

    The use of prepackaged cogeneration systems of modular size (100 kWe - 10 MWe) in conjunction with district heating and cooling is proposed as a way to enhance the energy conservation potential of both cogeneration and district energy systems. This report examines the technical and institutional aspects of this marriage of technologies, and develops a research agenda whose goal is to define this potential use of cogeneration more accurately and to develop the generic technology base needed to bring it to actuality. 11 refs.

  4. Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

    SciTech Connect

    Not Available

    1984-01-01

    Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

  5. European cogeneration market estimated at $12 billion by 1995

    SciTech Connect

    Not Available

    1987-09-01

    A new study by an international market research firm projects that European companies will install some $12 billion worth of cogeneration equipment by 1995. Products for waste heat recovery, steam and turbine generators made up a $993 million cogeneration market in 1986 in Europe. West Germany is expected to account for nearly a quarter of all volume throughout the 1986-95 period. In 1986, industry there spent some $218 million on cogeneration equipment. France and the U.K. are expected to account for another 17% and 16% of sales, respectively. The report discusses the various industrial end users, and on average finds that commercial/institutional establishments; food, beverage and tobacco producers; fuels processors; and the pulp and paper industry each represent between 10% and 15% of cogeneration purchases.

  6. Industrial cogeneration optimization program. Final report, September 1979

    SciTech Connect

    Davis, Jerry; McWhinney, Jr., Robert T.

    1980-01-01

    This study program is part of the DOE Integrated Industry Cogeneration Program to optimize, evaluate, and demonstrate cogeneration systems, with direct participation of the industries most affected. One objective is to characterize five major energy-intensive industries with respect to their energy-use profiles. The industries are: petroleum refining and related industries, textile mill products, paper and allied products, chemicals and allied products, and food and kindred products. Another objective is to select optimum cogeneration systems for site-specific reference case plants in terms of maximum energy savings subject to given return on investment hurdle rates. Analyses were made that define the range of optimal cogeneration systems for each reference-case plant considering technology applicability, economic factors, and energy savings by type of fuel. This study also provides guidance to other parts of the program through information developed with regard to component development requirements, institutional and regulatory barriers, as well as fuel use and environmental considerations. (MCW)

  7. Decision making for best cogeneration power integration into a grid

    NASA Astrophysics Data System (ADS)

    Al Asmar, Joseph; Zakhia, Nadim; Kouta, Raed; Wack, Maxime

    2016-07-01

    Cogeneration systems are known to be efficient power systems for their ability to reduce pollution. Their integration into a grid requires simultaneous consideration of the economic and environmental challenges. Thus, an optimal cogeneration power are adopted to face such challenges. This work presents a novelty in selectinga suitable solution using heuristic optimization method. Its aim is to optimize the cogeneration capacity to be installed according to the economic and environmental concerns. This novelty is based on the sensitivity and data analysis method, namely, Multiple Linear Regression (MLR). This later establishes a compromise between power, economy, and pollution, which leads to find asuitable cogeneration power, and further, to be integrated into a grid. The data exploited were the results of the Genetic Algorithm (GA) multi-objective optimization. Moreover, the impact of the utility's subsidy on the selected power is shown.

  8. New Jersey 10-year energy plan urges cogeneration reliance

    SciTech Connect

    Barber, J.

    1985-03-25

    The New Jersey DOE has drafted a 10-year master plan aimed at expanding state-wide conservation measures and encouraging the development of more than 2000 MW of cogenerated electricity through a combination of tax incentive and financial assistance programs. Although the plan deals with all sectors of energy use, the focus is on reducing industrial fuel and power costs. The incentives include a five-year exemption of new cogeneration facilities from property taxes, new buy-back rates equal to full avoided costs, and utility tariffs that allow the wheeling of cogenerated power. Part of the relicensing of casino-hotels could be a requirement for investigating the feasibility of installing a cogeneration system.

  9. Cogeneration systems and processes for treating hydrocarbon containing formations

    DOEpatents

    Vinegar, Harold J.; Fowler, Thomas David; Karanikas, John Michael

    2009-12-29

    A system for treating a hydrocarbon containing formation includes a steam and electricity cogeneration facility. At least one injection well is located in a first portion of the formation. The injection well provides steam from the steam and electricity cogeneration facility to the first portion of the formation. At least one production well is located in the first portion of the formation. The production well in the first portion produces first hydrocarbons. At least one electrical heater is located in a second portion of the formation. At least one of the electrical heaters is powered by electricity from the steam and electricity cogeneration facility. At least one production well is located in the second portion of the formation. The production well in the second portion produces second hydrocarbons. The steam and electricity cogeneration facility uses the first hydrocarbons and/or the second hydrocarbons to generate electricity.

  10. Energy Integrated Dairy Farm digester and cogeneration system installation

    SciTech Connect

    Ross, C.C.; Walsh, J.L.

    1984-01-01

    Georgia Tech finished in December, 1983 Phase II (system installation and startup) of its four year Energy Integrated Dairy Farm System (EIDFS) program. This paper outlines the selection and installation of the anaerobic digestion and cogeneration components of the EIDFS.

  11. Klickitat Cogeneration Project : Final Environmental Assessment.

    SciTech Connect

    United States. Bonneville Power Administration; Klickitat Energy Partners

    1994-09-01

    To meet BPA`s contractual obligation to supply electrical power to its customers, BPA proposes to acquire power generated by Klickitat Cogeneration Project. BPA has prepared an environmental assessment evaluating the proposed project. Based on the EA analysis, BPA`s proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 for the following reasons: (1)it will not have a significant impact land use, upland vegetation, wetlands, water quality, geology, soils, public health and safety, visual quality, historical and cultural resources, recreation and socioeconomics, and (2) impacts to fisheries, wildlife resources, air quality, and noise will be temporary, minor, or sufficiently offset by mitigation. Therefore, the preparation of an environmental impact statement is not required and BPA is issuing this FONSI (Finding of No Significant Impact).

  12. Cogeneration from glass furnace waste heat recovery

    SciTech Connect

    Hnat, J.G.; Cutting, J.C.; Patten, J.S.

    1982-06-01

    In glass manufacturing 70% of the total energy utilized is consumed in the melting process. Three basic furnaces are in use: regenerative, recuperative, and direct fired design. The present paper focuses on secondary heat recovery from regenerative furnaces. A diagram of a typical regenerative furnace is given. Three recovery bottoming cycles were evaluated as part of a comparative systems analysis: steam Rankine Cycle (SRC), Organic Rankine Cycle (ORC), and pressurized Brayton cycle. Each cycle is defined and schematicized. The net power capabilities of the three different systems are summarized. Cost comparisons and payback period comparisons are made. Organic Rankine cycle provides the best opportunity for cogeneration for all the flue gas mass flow rates considered. With high temperatures, the Brayton cycle has the shortest payback period potential, but site-specific economics need to be considered.

  13. Selecting gas turbines for power cogeneration

    SciTech Connect

    Roy, G.K. )

    1993-03-01

    To optimize the match between gas turbine and cogeneration and combined cycle power processes, one must go beyond typical mechanical requirements. Although several articles discuss mechanical design requirements for gas turbine trains, they focus on critical review of compressor performance curves, Campbell diagrams of the first-stage compressor blades and turbine stages, turbine flow-path temperature profiles and response to combustor flameout. Based on experience and literature, the following features should be considered when selecting gas turbines for cogen applications. Some are requirements while the balance are secondary criteria that affect gas turbine selection. The features are: firing temperature; exhaust temperature; exhaust gas mass flow vis-a-vis stream production; specific output; exhaust gas composition; oxygen content; steam injection and steam purity; emission level; single vs. two-shaft machine; gas turbine vs. overall efficiency of the combined cycle power plant; and machine reliability. The features are all briefly discussed.

  14. Evaluating Interventions in the U.S. Electricity System: Assessments of Energy Efficiency, Renewable Energy, and Small-Scale Cogeneration

    NASA Astrophysics Data System (ADS)

    Siler-Evans, Kyle

    to evaluate the effects of an additional wind turbine or solar panel in the U.S. electricity system. I find that the most attractive sites for renewables depend strongly on one's objective. A solar panel in Iowa displaces 20% more CO2 emissions than a panel in Arizona, though energy production from the Iowa panel is 25% less. Similarly, despite a modest wind resource, a wind turbine in West Virginia is expected to displace 7 times more health and environmental damages than a wind turbine in Oklahoma. Finally, I shift focus and explore the economics of small-scale cogeneration, which has long been recognized as a more efficient alternative to central-station power. Although the benefits of distributed cogeneration are widely cited, adoption has been slow in the U.S. Adoption could be encouraged by making cogeneration more economically attractive, either by increasing the expected returns or decreasing the risks of such investments. I present a case study of a 300-kilowatt cogeneration unit and evaluate the expected returns from: demand response, capacity markets, regulation markets, accelerated depreciation, a price on CO2 emissions, and net metering. In addition, I explore the effectiveness of feed-in tariffs at mitigating the energy-price risks to cogeneration projects.

  15. An assessment of advanced technology for industrial cogeneration

    NASA Technical Reports Server (NTRS)

    Moore, N.

    1983-01-01

    The potential of advanced fuel utilization and energy conversion technologies to enhance the outlook for the increased use of industrial cogeneration was assessed. The attributes of advanced cogeneration systems that served as the basis for the assessment included their fuel flexibility and potential for low emissions, efficiency of fuel or energy utilization, capital equipment and operating costs, and state of technological development. Over thirty advanced cogeneration systems were evaluated. These cogeneration system options were based on Rankine cycle, gas turbine engine, reciprocating engine, Stirling engine, and fuel cell energy conversion systems. The alternatives for fuel utilization included atmospheric and pressurized fluidized bed combustors, gasifiers, conventional combustion systems, alternative energy sources, and waste heat recovery. Two advanced cogeneration systems with mid-term (3 to 5 year) potential were found to offer low emissions, multi-fuel capability, and a low cost of producing electricity. Both advanced cogeneration systems are based on conventional gas turbine engine/exhaust heat recovery technology; however, they incorporate advanced fuel utilization systems.

  16. Exergy analysis and simulation of a 30MW cogeneration cycle

    NASA Astrophysics Data System (ADS)

    Dev, Nikhil; Samsher; Kachhwaha, S. S.; Attri, Rajesh

    2013-06-01

    Cogeneration cycle is an efficient mean to recover the waste heat from the flue gases coming out of gas turbine. With the help of computer simulation, design parameters may be selected for the best performance of cogeneration cycle. In the present work a program is executed in software EES on the basis of mathematical modelling described in paper to study cogeneration cycle performance for different parameters. Results obtained are compared with the results available in literature and are found in good agreement with them. Real gas and water properties are inbuilt in the software. Results show that enthalpy of air entering the combustion chamber is higher than that of the flue gases at combustion chamber outlet. For different operative conditions, energy and exergy efficiencies follow similar trends; although, exergy efficiency values are always lower than the corresponding energy efficiency ones. From the results it is found that turbine outlet temperature (TIT) of 524°C is uniquely suited to efficient cogeneration cycle because it enables the transfer of heat from exhaust gas to the steam cycle to take place over a minimal temperature difference. This temperature range results in the maximum thermodynamic availability while operating with highest temperature and highest efficiency cogeneration cycle. Effect of cycle pressure ratio (CR), inlet air temperature (IAT) and water pressure at heat recovery steam generator (HRSG) inlet on the 30MW cogeneration cycle is also studied.

  17. Evaluation of diurnal thermal energy storage combined with cogeneration systems

    NASA Astrophysics Data System (ADS)

    Somasundaram, S.; Brown, D. R.; Drost, M. K.

    1992-11-01

    This report describes the results of an evaluation of thermal energy storage (TES) integrated with simple gas turbine cogeneration systems. The TES system captures and stores thermal energy from the gas turbine exhaust for immediate or future generation of process heat. Integrating thermal energy storage with conventional cogeneration equipment increases the initial cost of the combined system; but, by decoupling electric power and process heat production, the system offers the following significant advantages: (1) electric power can be generated on demand, irrespective of the process heat load profile, thus increasing the value of the power produced; (2) although supplementary firing could be used to serve independently varying electric and process heat loads, this approach is inefficient. Integrating TES with cogeneration can serve the two independent loads while firing all fuel in the gas turbine. The study evaluated the cost of power produced by cogeneration and cogeneration/TES systems designed to serve a fixed process steam load. The value of the process steam was set at the levelized cost estimated for the steam from a conventional stand-alone boiler. Power costs for combustion turbine and combined-cycle power plants were also calculated for comparison. The results indicated that peak power production costs for the cogeneration/TES systems were between 25 and 40 percent lower than peak power costs estimated for a combustion turbine and between 15 and 35 percent lower than peak power costs estimated for a combined-cycle plant. The ranges reflect differences in the daily power production schedule and process steam pressure/temperature assumptions for the cases evaluated. Further cost reductions may result from optimization of current cogeneration/TES system designs and improvement in TES technology through future research and development.

  18. Cogeneration plant serves Prague sewage works

    SciTech Connect

    1995-10-01

    The new cogeneration plant at the sewage works in Prague, Czech Republic, was commissioned in June of this year. The plant is based on three gas engine modules from Deutz MWM-Gastechnik, which supply power and heat from the sewage gas. Also installed was a central plant control system (CPCS) for automation of the power plant, including long-term data storage for operation optimization. The gas engines are equipped with an individual total electronic management system (TEM) that optimizes engine operation and heat transfer. The TEM system also serves for safety monitoring of the relevant modules. Data communication between the TEM system and the CPCS is realized via a serial interface. The CPCS can thus test the availability of the individual heat generators and, depending on the condition of an individual module, switch over to another. With due consideration to environmental protection, Deutz MWM-Gastechnik guarantees NO{sub x} emissions of less than 500 mg/Nm{sup 3} (at 5% O{sub 2}) and CO emissions of less than 650 mg/Nm{sup 3}. The plant operator has also encapsulated the three gas engine modules in soundproofing enclosures in order to reduce noise emissions from 105 down to 78 dB(A).

  19. 77 FR 13593 - PowerSmith Cogeneration Project, LP; Notice of Request for Waiver

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-07

    ... Energy Regulatory Commission PowerSmith Cogeneration Project, LP; Notice of Request for Waiver Take... Act of 1978 (PURPA), as amended, 18 CFR 292.205(c), PowerSmith Cogeneration Project, LP (PowerSmith...-205(a)(1) of the Commission's Regulations for the topping- cycle cogeneration facility owned...

  20. 76 FR 4648 - PowerSmith Cogeneration Project, LP; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... Energy Regulatory Commission PowerSmith Cogeneration Project, LP; Notice of Filing January 19, 2011. Take notice that on January 13, 2011, PowerSmith Cogeneration Project, LP (PowerSmith), pursuant to section... Regulations for the topping-cycle cogeneration facility owned and operated by PowerSmith located in...

  1. Texasgulf solar cogeneration program. Mid-term topical report

    SciTech Connect

    Not Available

    1981-02-01

    The status of technical activities of the Texasgulf Solar Cogeneration Program at the Comanche Creek Sulfur Mine is described. The program efforts reported focus on preparation of a system specification, selection of a site-specific configuration, conceptual design, and facility performance. Trade-off studies performed to select the site-specific cogeneration facility configuration that would be the basis for the conceptual design efforts are described. Study areas included solar system size, thermal energy storage, and field piping. The conceptual design status is described for the various subsystems of the Comanche Creek cogeneration facility. The subsystems include the collector, receiver, master control, fossil energy, energy storage, superheat boiler, electric power generation, and process heat subsystems. Computer models for insolation and performance are also briefly discussed. Appended is the system specification. (LEW)

  2. Historical impacts and future trends in industrial cogeneration

    SciTech Connect

    Bluestein, J.; Lihn, M.

    1999-07-01

    Cogeneration, also known as combined heat and power (CHP), is the combined sequential generation of electricity and thermal or electric energy. The technology has been known essentially since the first commercial generation of electricity as a high efficiency technology option. After a period of decline, its use increased significantly during the 1980s and it is receiving renewed interest lately as a means of increasing efficiency and reducing emissions of air pollutants including carbon emissions. New and developing technology options have added to this potential. Forecasts of future growth and efforts to stimulate cogeneration need to take into account the history of the technology, the factors that have driven it in the past, and factors which could stimulate or retard future growth. This paper reviews and analyzes these factors and looks toward the future potential for cogeneration.

  3. Cogeneration handbook for the chemical process industries. [Contains glossary

    SciTech Connect

    Fassbender, A.G.; Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The desision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the chemical industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  4. Hospital pilot job may lead to 80 packaged cogeneration installations

    SciTech Connect

    Efron, S.

    1984-06-11

    Over 80 hospitals may install pre-packaged 500 kW cogeneration systems developed specifically for hospitals by Enertec Inc. of Dallas and Martin Cogeneration Systems of Topeka if a pilot project in a Houston hospital proves successful. The Hospital Corporation of America (HCA) and the Gas Research Institute were joint funders of the $569,000 test installation, but HCA will pay all the costs of future installations, which are estimated to cost $460,000. The systems provide 90-100% of hot water requirements over a nine-month period and 61% of electricity needs.

  5. Bagasse-based cogeneration projects in Kenya. Export trade information

    SciTech Connect

    Kenda, W.; Shrivastava, V.K.

    1992-03-01

    A Definitional Mission team evaluated the prospects of the US Trade and Development Program (TDP) funding a feasibility study that would assist the Government of Kenya in developing power cogeneration plants in three Kenyan sugar factories and possibly two more that are now in the planning stage or construction. The major Kenyan sugar producing region around Kisumu, on Lake Victoria has climatic conditions that permit cane growing operations ideally suitable for cogeneration of power in sugar factories. The total potentially available capacity from the proposed rehabilitation of the three mills will be approximately 25.15 MW, or 5.7 percent of total electricity production.

  6. Cogeneration handbook for the petroleum refining industry. [Contains glossary

    SciTech Connect

    Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the petroleum refining industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  7. Cogeneration handbook for the food processing industry. [Contains glossary

    SciTech Connect

    Eakin, D.E.; Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fasbender, A.G.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the food processing industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  8. Cogeneration handbook for the textile industry. [Contains glossary

    SciTech Connect

    Garrett-Price, B.A.; Fassbender, L.L.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the textile industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  9. Tomorrow`s energy today for cities and counties: Cogeneration powers up cost-competitive energy

    SciTech Connect

    1995-11-01

    Cities and counties build many multi-million dollar facilities, and supplying energy to run these facilities is a long-term obligation for a community. Cogeneration offers local governments an opportunity to reduce the cost of providing electricity, heating, and cooling to their buildings. Sometimes cogeneration is combined with district heating and cooling systems. This kind of cogeneration results in system efficiencies as high as 70%--about twice the efficiency of a conventional power plant that produces only electricity! The article describes cogeneration combined with district cooling in Trenton, NJ, and cogeneration on a small scale in San Jose, California.

  10. Technical assessment of an oil-fired residential cogeneration system

    SciTech Connect

    McDonald, R.J.

    1993-01-01

    The definition of cogeneration, within the context of this project, is the simultaneous production of electricity and heat energy from a single machine. This report will present the results of an engineering analysis of the efficiency and energy-conservation potential associated with a unique residential oil-fired cogeneration system that provides both heat and electric power. The system operates whenever a thermostat signals a call for heat in the home, just as a conventional heating system. However, this system has the added benefit of cogenerating electricity whenever it is running to provide space heating comfort. The system is designed to burn No. 2 heating oil, which is consumed in an 11-horsepower, two cylinder, 56.75-cubic-inch, 1850-RPM diesel engine. This unit is the only pre-production prototype residential No. 2 oil-fired cogeneration system known to exist in the world. As such, it is considered a landmark development in the field of oil-heat technology.

  11. Analysis of long-time operation of micro-cogeneration unit with fuel cell

    NASA Astrophysics Data System (ADS)

    Patsch, Marek; Čaja, Alexander

    2015-05-01

    Micro-cogeneration is cogeneration with small performance, with maximal electric power up to 50 kWe. On the present, there are available small micro-cogeneration units with small electric performance, about 1 kWe, which are usable also in single family houses or flats. These micro-cogeneration units operate on principle of conventional combustion engine, Stirling engine, steam engine or fuel cell. Micro-cogeneration units with fuel cells are new progressive developing type of units for single family houses. Fuel cell is electrochemical device which by oxidation-reduction reaction turn directly chemical energy of fuel to electric power, secondary products are pure water and thermal energy. The aim of paper is measuring and evaluation of operation parameters of micro-cogeneration unit with fuel cell which uses natural gas as a fuel.

  12. Assessment of potential and existing problems concerning interface between electric utilities and cogenerators

    SciTech Connect

    Not Available

    1980-03-01

    The potential and existing problems concerning the interface between US electric utilities and cogenerators are considered by region. Also considered are regulatory barriers, rates and contracts, economic feasibility, and impact on system planning. Finally, the impact of the National Energy Act on the marketability potential of cogeneration is reviewed. The three appendixes summarize the utility meetings on cogeneration held in Washington, DC, Los Angeles, and Chicago.

  13. Fort Hood solar cogeneration facility conceptual design study

    SciTech Connect

    Not Available

    1981-05-01

    A study is done on the application of a tower-focus solar cogeneration facility at the US Fort Hood Army Base in Killeen, Texas. Solar-heated molten salt is to provide the steam for electricity and for room heating, room cooling, and domestic hot water. The proposed solar cogeneration system is expected to save the equivalent of approximately 10,500 barrels of fuel oil per year and to involve low development risks. The site and existing plant are described, including the climate and plant performance. The selection of the site-specific configuration is discussed, including: candidate system configurations; technology assessments, including risk assessments of system development, receiver fluids, and receiver configurations; system sizing; and the results of trade studies leading to the selection of the preferred system configuration. (LEW)

  14. Cogeneration Technology Alternatives Study (CTAS). Volume 1: Summary

    NASA Technical Reports Server (NTRS)

    Barna, G. J.; Burns, R. K.; Sagerman, G. D.

    1980-01-01

    Various advanced energy conversion systems that can use coal or coal-derived fuels for industrial cogeneration applications were compared to provide information needed by DOE to establish research and development funding priorities for advanced-technology systems that could significantly advance the use of coal or coal-derived fuels in industrial cogeneration. Steam turbines, diesel engines, open-cycle gas turbines, combined cycles, closed-cycle gas turbines, Stirling engines, phosphoric acid fuel cells, molten carbonate fuel cells, and thermionics were studied with technology advancements appropriate for the 1985-2000 time period. The various advanced systems were compared and evaluated for wide diversity of representative industrial plants on the basis of fuel energy savings, annual energy cost savings, emissions savings, and rate of return on investment as compared with purchasing electricity from a utility and providing process heat with an on-site boiler. Also included in the comparisons and evaluations are results extrapolated to the national level.

  15. The Mulberry Cogeneration Facility: Design features and operating success

    SciTech Connect

    Jasper, W.M.; Wierschem, R.A.; Gray, D.C.

    1995-12-31

    The Mulberry Cogeneration Facility is in successful, reliable, and profitable service, with the complex requirements of zero discharge, extensive water treatment, process steam supply, and inlet chillers having been reduced to routine, automated operation. What was initially visualized by the developer as a straightforward combined cycle plant became much more than that as the various requirements for environmental and regulatory compliance became necessities, along with the desire to maximize output and revenues in response to growing power demands. A delicate balance exists between a financially successful cogeneration project and the Owners` obligation to the community and the environment. As competitive pressures grow and expectations of investors, insurers, operators, and the public increase, still more creativity will be required to provide a safe, reliable, cost-effective plant on ever shorter schedules.

  16. Gas engines provide cogeneration service for Fantoni MDF plant

    SciTech Connect

    Chellini, R.

    1996-12-01

    A large MDF (medium density fiberboard) plant recently started industrial production at the headquarters of Fantoni, in Osoppo (UDINE) Italy. Providing electric power and thermal energy to the process is a cogeneration plant based on four large spark-ignited gas engines. The new Osoppo MDF plant processes 800 m{sup 3} of finished boards per day in a manufacturing line that combines the most advanced technologies available from several European equipment manufacturers. The cogeneration plant features four type 12VA32G spark-ignited gas engines from Fincantieri`s Diesel Engine Division, driving 50Hz, 6.3 kV, 5400 kVA Ansaldo generators at 750 r/min. The turbocharged and intercooled engines are a spark-ignited version of the company`s A32 diesel. They feature 12 Vee-arranged cylinders with 320 mm bore and 390 mm stroke. 5 figs.

  17. Cogeneration upgrades. The time is ripe in California

    SciTech Connect

    Fournier, S.R.; Bitting, R.A.

    1995-07-01

    With a life of 20 to 30 years or more, energy facilities represent a significant investment. Therefore, keeping facilities up-to-date is a sound capital investment, extending the life of the plant and increasing its economic efficiency. The following is an overview of several retrofit projects with which International Power Technology has recently been involved. Included is a discussion of the technical as well as economic logic behind each decision to retrofit. Most of the projects discussed here have a payback period of one to two years. International Power Technology (IPT), an energy service company in Redwood City, California, has over 500000 hours of plant operating experience, and is well acquainted with the benefits and challenges of cogeneration. IPT offers a broad range of services to parties interested in cogeneration, independent power, and thermal energy production. These activities can be tailored to the specific needs of a facility or plant owner, and include retrofit services.

  18. Benefices environnementaux de la cogeneration d'energie en milieu hospitalier et cas de l'Hopital de Moncton

    NASA Astrophysics Data System (ADS)

    Kone, Diakalia

    .06 MW cogeneration plant, to be run on natural gas, to meet about 30% of the facility's current demand for electricity and heat. In order to anticipate the environmental consequences of this CHP project, an environmental impact assessment (EIA) was conducted, according to the principles that apply in New Brunswick (Regulation 87-83 on EIA). A literature review was conducted and a matrix approach (matrix of impacts) was used to identify and assess the anticipated environmental impacts. The study showed that multiple stakeholders in the healthcare sector can reap benefits of CHP deployment. Facility owners can reduce energy costs and increase power reliability to enhance operations' continuity, during normal and extraordinary times (e.g., natural disasters). For instance, when hurricanes Katrina and Rita struck the United States in 2005, hospitals running with CHP were able to provide secure electricity supplies for emergency facilities and shelters. CHP also has environmental benefits related to its distinctively high efficiency. But its deployment in the healthcare sector also provides challenges, mainly due to the fact that power production is not a core activity for an hospital. These challenges can be overcome, however, as shown by numerous success stories in hospitals worldwide; specialised resources are available to help hospitals switch to CHP. This study underlines some of the steps a hospital can take toward this aim. EIA of The Moncton Hospital CHP project suggests that, globally, the environmental impacts of CHP are reduced compared to the traditional production of electricity and heat separately. Cogeneration utilizes fewer resources (fuel) and therefore releases fewer GHG and other pollutants. However, quantifying the emissions avoided is challenging. Also, the environmental benefits of CHP may be less obvious when compared to a centralised nuclear or hydraulic power production, which emits less GHG than power plants operating on coal or fuel oil. The study

  19. Potential and policy issues of industrial cogeneration in the Dominican Republic

    SciTech Connect

    Not Available

    1987-04-01

    A partial solution to the problems created by the high cost of imported energy affecting the economic well-being of the Dominican Republic is outlined. The introduction of cogeneration into the industrial sector could save a significant amount of imported fuel. COENER, a domestic government program, provides for private-sector cogeneration which, if implemented, could provide as much as 10% of the country's installed electrical-generating capacity. Results of an Agency for International Development study, reported here, indicate that the industries most likely to benefit from the cogeneration scheme and the institutional and regulatory barriers that must be overcome if a cogeneration program is to be successful.

  20. Small-scale biomass fueled cogeneration systems - A guidebook for general audiences

    SciTech Connect

    Wiltsee, G.

    1993-12-01

    What is cogeneration and how does it reduce costs? Cogeneration is the production of power -- and useful heat -- from the same fuel. In a typical biomass-fueled cogeneration plant, a steam turbine drives a generator, producing electricity. The plant uses steam from the turbine for heating, drying, or other uses. The benefits of cogeneration can mostly easily be seen through actual samples. For example, cogeneration fits well with the operation of sawmills. Sawmills can produce more steam from their waste wood than they need for drying lumber. Wood waste is a disposal problem unless the sawmill converts it to energy. The case studies in Section 8 illustrate some pluses and minuses of cogeneration. The electricity from the cogeneration plant can do more than meet the in-house requirements of the mill or manufacturing plant. PURPA -- the Public Utilities Regulatory Policies Act of 1978 -- allows a cogenerator to sell power to a utility and make money on the excess power it produces. It requires the utility to buy the power at a fair price -- the utility`s {open_quotes}avoided cost.{close_quotes} This can help make operation of a cogeneration plant practical.

  1. Thermionic cogeneration burner assessment study performance analysis results

    SciTech Connect

    Not Available

    1983-12-01

    The purpose of this contract was to (1) test and evaluate two of the more important engineering aspects of designing and building thermionic cogeneration burners (TCB's); (2) make a cost and performance estimate of the TCB; and identify and evaluate industries where TCB's could be installed and where that the electrical power (dc) produced by the TCB's would be used directly in the process. The results of the performance analysis are detailed.

  2. Advanced coal-fueled industrial cogeneration gas turbine system

    SciTech Connect

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1990-07-01

    The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. This quarter, work was centered on design, fabrication, and testing of the combustor, cleanup, fuel specifications, and hot end simulation rig. 2 refs., 59 figs., 29 tabs.

  3. Investigations on an oriented cooling design for thermoelectric cogenerations

    NASA Astrophysics Data System (ADS)

    Zheng, X. F.; Liu, C. X.; Yan, Y. Y.

    2012-11-01

    In thermoelectric application, it is widely known that the material limitation has still been the chief barrier of lifting its application to a higher level. Continuous efforts are extensively being made in developing novel material structures and constructions for thermoelectric modules with higher conversion efficiency. However, the overall system efficiency, which is one of the major parameters that most of the engineer and users care about, is not only ruled by the properties of applied thermoelectric materials, but also decided by the design of heat exchangers used on both sides of thermoelectric modules. Focusing on the cooling capacity and hydraulic characteristics of heat exchanger, this paper introduces an oriented cooling method for the domestic thermoelectric cogeneration, which delivers system efficiency up to 80%. This purpose-oriented cooling plate is designed for thermoelectric cogeneration for the residential houses installed with boiler or other heating facilities with a considerable amount of unused heat. The design enables Thermoelectric Cogeneration System (TCS) to be flexibly integrated into the existing hydraulic system. The mathematical model for the cooling plate has been established for a well understanding at the theoretical level. The performance of cooling plate has been investigated in a series of experimental studies which have been conducted under different coolant inlet velocity and temperature. The economic operating zone in which a good system performance could be achieved has been discussed and identified for the current configuration.

  4. Pumps, valves and piping for cogeneration and district heating

    SciTech Connect

    O'Keefe, W.

    1993-01-01

    The two concepts of cogeneration (cogen) and district heating (DH) have certain points of similarity. They are both quite old, fell into disuse some decades ago, have had a renaissance of late, and often are plagued by economics that are only marginal. At present, however, both cogeneration and district heating ride a wave of popular fancy and regulatory whim, all of which has had as one result the inducing of swarms of lawyers and financial soldiers of fortune to flock to the standards, for at least the time being. Although the finances of the two technologies frequently call for innovation, at least the fluid-handling engineering problems are not extraordinary. Pressures, temperatures, flow rates, and corrosion dangers are nearly always within readily mastered limits. The major difficulties arise generally either from the indifference and parsimony of the owners or from the ignorance of the plant management and operations personnel. This report intends to be only a general perspective which the reader must enlarge upon by such other aids as POWER special reports on narrower sectors. Retain in mind the basic definitions for the two technologies: Cogeneration is a simultaneous production of both useful thermal energy (as steam, hot water, or hot gas) and electric power from a fuel source. District heating is the supplying of thermal energy in steam or water to remote and usually noncontiguous locations which are often under separate ownership. District cooling, the increasingly popular supplement to district heating, supplies chilled water under similar circumstances.

  5. Potential for cogeneration of heat and electricity in California industry, phase 1

    NASA Technical Reports Server (NTRS)

    Davis, H. S.; Gurfield, R. M.; Moretti, V. C.; Slonski, M. L.

    1978-01-01

    Information collected during an industrial survey of 12 selected plants was organized into four categories: technical, economic, environmental, and institutional. The technical aspects of industrial cogeneration are examined on a site-specific basis. The site-specific economics, environmental constraints, and institutional barriers that impact industrial cogeneration will be further investigated.

  6. Assessment of Training Needs for Cogeneration Technology in Schuylkill County. Project Number Two.

    ERIC Educational Resources Information Center

    Geroy, Gary D.; Passmore, David L.

    This paper reports an assessment of the education and training program needs stimulated by investment in cogeneration technology in Schuylkill County, Pennsylvania. (Cogeneration technology would convert raw culm, a byproduct of anthracite coal mining, into a fuel source for steam power generation.) After plant tours and interviews with plant…

  7. 77 FR 2717 - Cherokee County Cogeneration Partners, LLC; Supplemental Notice That Initial Market-Based Rate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-19

    ... Energy Regulatory Commission Cherokee County Cogeneration Partners, LLC; Supplemental Notice That Initial... notice in the above-referenced proceeding of Cherokee County Cogeneration Partners, LLC's application for... for review in the Commission's Public Reference Room in Washington, DC. There is an eSubscription...

  8. 77 FR 77073 - Carson Cogeneration Company; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-31

    ... Energy Regulatory Commission Carson Cogeneration Company; Supplemental Notice That Initial Market-Based... above-referenced proceeding, of Carson Cogeneration Company's application for market-based rate... clicking on the appropriate link in the above list. They are also available for review in the...

  9. 77 FR 66977 - Middletown Cogeneration Company LLC; Supplemental Notice That Initial Market-Based Rate Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-08

    ... Energy Regulatory Commission Middletown Cogeneration Company LLC; Supplemental Notice That Initial Market... in the above-referenced proceeding of Middletown Cogeneration Company LLC's application for market... clicking on the appropriate link in the above list. They are also available for review in the...

  10. 75 FR 13534 - Grays Ferry Cogeneration Partnership; Supplemental Notice That Initial Market-Based Rate Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-22

    ... Energy Regulatory Commission Grays Ferry Cogeneration Partnership; Supplemental Notice That Initial... supplemental notice in the above-referenced proceeding of Grays Ferry Cogeneration Partnership application for...Library system by clicking on the appropriate link in the above list. They are also available for...

  11. 76 FR 1609 - Morris Cogeneration, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-11

    ... Energy Regulatory Commission Morris Cogeneration, LLC; Supplemental Notice That Initial Market-Based Rate... notice in the above-referenced proceeding Morris Cogeneration, LLC's application for market-based rate... by clicking on the appropriate link in the above list. They are also available for review in...

  12. 77 FR 66975 - Haverhill Cogeneration Company LLC; Supplemental Notice That Initial Market-Based Rate Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-08

    ... Energy Regulatory Commission Haverhill Cogeneration Company LLC; Supplemental Notice That Initial Market... in the above-referenced proceeding of Haverhill Cogeneration Company LLC's application for market... clicking on the appropriate link in the above list. They are also available for review in the...

  13. Prospects for constructing cogeneration stations equipped with back-pressure steam turbines

    NASA Astrophysics Data System (ADS)

    Ivanovskii, A. A.; Kultyshev, A. Yu.; Stepanov, M. Yu.

    2014-12-01

    The possibilities of using back-pressure cogeneration turbines developed on the basis of serially produced ones are considered together with the thermal process circuits in which such turbines are applied. Design versions and advantages of cogeneration stations in which the proposed process circuits are implemented are described.

  14. Thermoeconomic analysis: A criterion for the selection of cogeneration systems

    SciTech Connect

    Luz-Silveira, J.; Balestieri, J.A.P.; Santos, A.H.M.; Almeida, R.A.

    1996-12-31

    The economical viability of three cogeneration schemes as supplying alternatives for a hypothetical industrial process has been studied. A cost appropriation method based on Valero`s studies (1986) has been used. This method enables the determination of exergetic flows, the Second Law efficiency of equipment and the monetary costs of the products acquired by the industrial process (steam and electrical energy). The criterion adopted for the selection is the global cost of the supplied products to the industrial process as regarding in Brazilian conditions.

  15. Thermoeconomic analysis and design of a cogeneration system

    SciTech Connect

    Benelmir, R. ); Evans, R.B. ); von Spakovsky, M. )

    1991-01-01

    Decentralized design methods will always greatly facilitate the optimum design of large engineering systems whenever a High Degree of Decentralization, H.D.D., is achieved. H.D.D. allows the optimization of each component by itself without significantly sacrificing the overall system optimum. In this paper primary engineering component costing expressions are introduced, resulting in a significant H.D.D. - called primary decentralization - for the design of a gas turbine with cogeneration by a steam power bottoming cycle. These cost expressions are a compromise between simplicity and a representative model for engineering component costing.

  16. The T-125/150-12.8 cogeneration steam turbine

    NASA Astrophysics Data System (ADS)

    Valamin, A. E.; Kultyshev, A. Yu.; Gol'dberg, A. A.; Sakhnin, Yu. A.; Bilan, V. N.; Stepanov, M. Yu.; Polyaeva, E. N.; Shekhter, M. V.; Shibaev, T. L.

    2014-12-01

    The article presents the design, the economic indicators, and the main solutions on the thermal process circuit and layout of the T-125/150-12.8 turbine, a new design version of the T-100-12.8 turbine, which is one of the best known, unique and widely used cogeneration turbines in Russia and abroad. The project of the new turbine is supposed to be used both for renovating and upgrading already installed turbines of the T-100 family and for supplying it as a full set for replacing obsolete equipment or constructing new one.

  17. The potential for industrial cogeneration development by 1990

    NASA Astrophysics Data System (ADS)

    1981-07-01

    The cogeneration study focused on five industries that constitute three quarters of industrial steam demand: pulp and paper, chemicals, petroleum refining, steel, and food processing. These industries use almost one fifth of the total energy consumed in the United States. The analysis reflected the investment and regulatory concerns in the United States. The analysis reflected the investment used by industrial and utility managers. Phone discussions were held with approximately 70 companies to verify and augment the process and energy use data for the five industries.

  18. Cogeneration Technology Alternatives Study (CTAS). Volume 2: Analytical approach

    NASA Technical Reports Server (NTRS)

    Gerlaugh, H. E.; Hall, E. W.; Brown, D. H.; Priestley, R. R.; Knightly, W. F.

    1980-01-01

    The use of various advanced energy conversion systems were compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. The ground rules established by NASA and assumptions made by the General Electric Company in performing this cogeneration technology alternatives study are presented. The analytical methodology employed is described in detail and is illustrated with numerical examples together with a description of the computer program used in calculating over 7000 energy conversion system-industrial process applications. For Vol. 1, see 80N24797.

  19. Waste-to-Energy Cogeneration Project, Centennial Park

    SciTech Connect

    Johnson, Clay; Mandon, Jim; DeGiulio, Thomas; Baker, Ryan

    2014-04-29

    The Waste-to-Energy Cogeneration Project at Centennial Park has allowed methane from the closed Centennial landfill to export excess power into the the local utility’s electric grid for resale. This project is part of a greater brownfield reclamation project to the benefit of the residents of Munster and the general public. Installation of a gas-to-electric generator and waste-heat conversion unit take methane byproduct and convert it into electricity at the rate of about 103,500 Mwh/year for resale to the local utility. The sale of the electricity will be used to reduce operating budgets by covering the expenses for streetlights and utility bills. The benefits of such a project are not simply financial. Munster’s Waste-to Energy Cogeneration Project at Centennial Park will reduce the community’s carbon footprint in an amount equivalent to removing 1,100 cars from our roads, conserving enough electricity to power 720 homes, planting 1,200 acres of trees, or recycling 2,000 tons of waste instead of sending it to a landfill.

  20. Cogeneration technology alternatives study. Volume 1: Summary report

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Data and information in the area of advanced energy conversion systems for industrial congeneration applications in the 1985-2000 time period was studied. Six current and thirty-one advanced energy conversion systems were defined and combined with appropriate balance-of-plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on-site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Overall, fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal-derived fuels, or coal with advanced fluid bed combustion or on-site gasification systems.

  1. Comparison of alternative cogeneration power systems for three industrial sites

    SciTech Connect

    Harper, A.D.

    1983-01-01

    Three alternative on-site cogeneration power systems were evaluated against technical and economic criteria for three industrial sites. Technical factors included plant sizing to meet process thermal loads, fuel utilization, power output, siting consideration, fuel savings, etc. Economic factors included capital cost, return on equity, and ownership/financing options among others. Each cogeneration plant was evaluated by comparison with the current separate generation scheme. The technologies considered were conventional coal-fired, steam topping cycles; coal-fired, atmospheric fluidized bed/closed-cycle gas turbines; and coal-fired, atmospheric fluidized bed/open cycle gas turbines. These approaches were optimized for three sites: an agricultural chemical plant, a brewery, and a kraft paper mill. The results showed that the closed cycle gas turbines yielded the best economics, primarily due to a lower initial cost. The open cycle gas turbine, when combined with a steam bottoming cycle, resulted in larger power outputs than would be realized in the closed cycle or steam turbine cases. None of the plants studied matched the plant electrical load while following the thermal load.

  2. A 1000-cell SOFC reactor for domestic cogeneration

    NASA Astrophysics Data System (ADS)

    Alston, T.; Kendall, K.; Palin, M.; Prica, M.; Windibank, P.

    A cogeneration system was built using 1000 cells with the intention of supplying 30 kW of hot water and 500 W of power. The basis of the cogenerator was the small tubular SOFC design. 8Y zirconia was mixed into a plastic paste and extruded to form thin-walled tubes. The process produced a zirconia material with high strength and good electrical properties. After drying and firing to full density, electrodes were coated onto the inner and outer surfaces of the electrolyte, then sintered. Current collecting wires were wound around the tubular cells and the tubes were assembled into a reactor. Either hydrogen or a premix of natural gas and air was fed through the tubes and ignited by a hot wire. The ignition shock did not damage the cells in any way. Cycling was achieved within minutes. A steel heat exchanger/recuperator was used to feed hot air to the cell stack. The electrical output was measured via a potentiostat.

  3. Cedar Bay Cogeneration Project: A plant in transition

    SciTech Connect

    Perry, M.A.; Lenertz, R.P.

    1994-12-31

    The Cedar Bay Cogeneration Project was initially developed by Applied Energy Services and contracted on a turnkey basis to Multipower Associates as part of a multiple projects agreement. Multipower Associates is a joint venture including The Pritchard Company (a wholly owned subsidiary of Black and Veatch), Marubeni Corporation, and Ahlstrom Pyropower. The project changed ownership to the Cedar Bay Generating Company at the midpoint of the construction phase. The Cedar Bay Cogeneration Plant provides 250 MW net to Florida Power and Light Company while producing up to 380,000 lb/h process steam to the adjacent Seminole Kraft Papermill. Three Ahlstrom Pyropower circulating fluidized bed boilers provide steam to a Toshiba turbine. Each boiler incorporates reheat capabilities to improve cycle thermodynamic efficiency. One reverse gas fabric filter is provided for each boiler to control particulate emissions. Ammonia injection (Thermal DeNo{sub x}-SNCR) is employed to limit the NO{sub x} emissions. The plant relies on a dilute phase pneumatic ash handling system to move the byproduct to an ash pelletizing complex. The original project developers required a state-of-the-art ash pelletizing system. Appreciable research has been done in adapting this new technology for this project. The ash pelletizing system transforms the ash into pellets, allowing the ash to be loaded into open railcars and transported back to the coal mine by conventional material handling equipment.

  4. Victorias energy efficiency and cogeneration project. Final report

    SciTech Connect

    1998-10-31

    This report describes a two-phase energy project currently contemplated for joint implementation at the Victorias Milling Company, a large sugar mill and refinery on the island of Negros in the Visayas region of the Philippines. The Energy Efficiency (EE) phase is expected to reduce of eliminate VMC`s fossil fuel consumption, which will have a direct and substantial impact on carbon emissions. Phase I is an EE project which involves the installation of equipment to reduce steam and electricity demand in the factories. Phase II, will involve retrofitting and increasing the capacity of the steam and power generation systems, and selling power to the grid. By increasing efficiency and output, the cogeneration project will allow the factory to use only bagasse sugar cane fiber waste as fuel for energy needs. The cogeneration project will also eliminate VMC`s electricity purchases and supply additional power for the island, which will offset generation capacity expansion on the island and the Visayas region.

  5. Thermal-economic analysis of organic Rankine combined cycle cogeneration

    NASA Astrophysics Data System (ADS)

    Porter, R. W.

    1982-12-01

    An evaluation of organic rankine cycles (ORC) as combined with topping incorporating gas turbines or diesel engines, and with subsequent waste heat utilization is presented. It is found that the potential benefit of the proposed organic Rankine combined cycle cogeneration of useful heat and electricity is more flexible in meeting demands for the two products, by varying the mode of operation of the system. A thermal-economic analysis is developed and illustrated with cost and performance data for commercially available equipment, and with general economic parameters reflecting current regulations and market conditions. The performance of the ORC and of the entire combined cycle is described. Equations to evaluate the various thermodynamic and economic parameter, and the resultant case flows are presented. Criteria are developed to assess the addition of an ORC to a cogeneration system without ORC is viable based on rate of return on incremental investment. It is indicated that the proposed system is potentially viable, however, it is not viable under conditions prevailing in Chicago for the selected case studies.

  6. CELCAP: A Computer Model for Cogeneration System Analysis

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A description of the CELCAP cogeneration analysis program is presented. A detailed description of the methodology used by the Naval Civil Engineering Laboratory in developing the CELCAP code and the procedures for analyzing cogeneration systems for a given user are given. The four engines modeled in CELCAP are: gas turbine with exhaust heat boiler, diesel engine with waste heat boiler, single automatic-extraction steam turbine, and back-pressure steam turbine. Both the design point and part-load performances are taken into account in the engine models. The load model describes how the hourly electric and steam demand of the user is represented by 24 hourly profiles. The economic model describes how the annual and life-cycle operating costs that include the costs of fuel, purchased electricity, and operation and maintenance of engines and boilers are calculated. The CELCAP code structure and principal functions of the code are described to how the various components of the code are related to each other. Three examples of the application of the CELCAP code are given to illustrate the versatility of the code. The examples shown represent cases of system selection, system modification, and system optimization.

  7. Modern fluidized bed combustion in Ostrava-Karvina cogeneration plants

    SciTech Connect

    Mazac, V.; Novacek, A.; Volny, J.

    1995-12-01

    The contemporary situation of our environment claims the sensitive approach to solving effective conversion of energy. Limited supplies of noble fuels and their prices evoke the need to use new combustion technologies of accessible fuels in given region without negative ecological influences. Energoproject participates in the preparation of the two projects in Ostrava-Karvin{acute a} black coal field in Czech Republic. The most effective usage of fuel energy is the combined of electricity and heat. If this physical principle is supported by a pressurized fluidized bed combustion (PFBC) one obtains a high electricity/heat ratio integrated steam-gas cycle on the basis of solid fuel. Cogeneration plant Toebovice is the dominant source (600 MW{sub th}) of Ostrava district heating system (1100 MW{sub th}). The high utilization of the installed output and utilization of the clean, compact and efficient of the PFBC technology is the principal but not the single reason for the selection of the Toebovice power plant as the first cogeneration plant for installation of the PFBC in Czech Republic. The boiler will burn black coal from the neighboring coal basin.

  8. BP Cherry Point Cogeneration Project, Draft Environmental Impact Statement

    SciTech Connect

    N /A

    2003-09-19

    BP West Coast Products, LLC (BP or the Applicant) proposes to construct and operate a nominal 720-megawatt (MW), natural-gas-fired, combined-cycle cogeneration facility next to the existing BP Cherry Point Refinery in Whatcom County, Washington. The Applicant also owns and operates the refinery, but the cogeneration facility and the refinery would be operated as separate business units. The cogeneration facility and its ancillary infrastructure would provide steam and 85 MW of electricity to meet the operating needs of the refinery and 635 MW of electrical power for local and regional consumption. The proposed cogeneration facility would be located between Ferndale and Blaine in northwestern Whatcom County, Washington. The Canadian border is approximately 8 miles north of the proposed project site. The Washington State Energy Facility Site Evaluation Council (EFSEC) has jurisdiction over the evaluation of major energy facilities including the proposed project. As such, EFSEC will recommend approval or denial of the proposed cogeneration facility to the governor of Washington after an environmental review. On June 3, 2002, the Applicant filed an Application for Site Certification (ASC No. 2002-01) with EFSEC in accordance with Washington Administrative Code (WAC) 463-42. On April 22, 2003, the Applicant submitted an amended ASC that included, among other things, a change from air to water cooling. With the submission of the ASC and in accordance with the State Environmental Policy Act (SEPA) (WAC 463-47), EFSEC is evaluating the siting of the proposed project and conducting an environmental review with this Environmental Impact Statement (EIS). Because the proposed project requires federal agency approvals and permits, this EIS is intended to meet the requirements under both SEPA and the National Environmental Policy Act (NEPA). The Bonneville Power Administration (Bonneville) and U.S. Army Corps of Engineers (Corps) also will use this EIS as part of their

  9. Performance and operational economics estimates for a coal gasification combined-cycle cogeneration powerplant

    NASA Technical Reports Server (NTRS)

    Nainiger, J. J.; Burns, R. K.; Easley, A. J.

    1982-01-01

    A performance and operational economics analysis is presented for an integrated-gasifier, combined-cycle (IGCC) system to meet the steam and baseload electrical requirements. The effect of time variations in steam and electrial requirements is included. The amount and timing of electricity purchases from sales to the electric utility are determined. The resulting expenses for purchased electricity and revenues from electricity sales are estimated by using an assumed utility rate structure model. Cogeneration results for a range of potential IGCC cogeneration system sizes are compared with the fuel consumption and costs of natural gas and electricity to meet requirements without cogeneration. The results indicate that an IGCC cogeneration system could save about 10 percent of the total fuel energy presently required to supply steam and electrical requirements without cogeneration. Also for the assumed future fuel and electricity prices, an annual operating cost savings of 21 percent to 26 percent could be achieved with such a cogeneration system. An analysis of the effects of electricity price, fuel price, and system availability indicates that the IGCC cogeneration system has a good potential for economical operation over a wide range in these assumptions.

  10. Benefices environnementaux de la cogeneration d'energie en milieu hospitalier et cas de l'Hopital de Moncton

    NASA Astrophysics Data System (ADS)

    Kone, Diakalia

    .06 MW cogeneration plant, to be run on natural gas, to meet about 30% of the facility's current demand for electricity and heat. In order to anticipate the environmental consequences of this CHP project, an environmental impact assessment (EIA) was conducted, according to the principles that apply in New Brunswick (Regulation 87-83 on EIA). A literature review was conducted and a matrix approach (matrix of impacts) was used to identify and assess the anticipated environmental impacts. The study showed that multiple stakeholders in the healthcare sector can reap benefits of CHP deployment. Facility owners can reduce energy costs and increase power reliability to enhance operations' continuity, during normal and extraordinary times (e.g., natural disasters). For instance, when hurricanes Katrina and Rita struck the United States in 2005, hospitals running with CHP were able to provide secure electricity supplies for emergency facilities and shelters. CHP also has environmental benefits related to its distinctively high efficiency. But its deployment in the healthcare sector also provides challenges, mainly due to the fact that power production is not a core activity for an hospital. These challenges can be overcome, however, as shown by numerous success stories in hospitals worldwide; specialised resources are available to help hospitals switch to CHP. This study underlines some of the steps a hospital can take toward this aim. EIA of The Moncton Hospital CHP project suggests that, globally, the environmental impacts of CHP are reduced compared to the traditional production of electricity and heat separately. Cogeneration utilizes fewer resources (fuel) and therefore releases fewer GHG and other pollutants. However, quantifying the emissions avoided is challenging. Also, the environmental benefits of CHP may be less obvious when compared to a centralised nuclear or hydraulic power production, which emits less GHG than power plants operating on coal or fuel oil. The study

  11. The performance of residential micro-cogeneration coupled with thermal and electrical storage

    NASA Astrophysics Data System (ADS)

    Kopf, John

    Over 80% of residential secondary energy consumption in Canada and Ontario is used for space and water heating. The peak electricity demands resulting from residential energy consumption increase the reliance on fossil-fuel generation stations. Distributed energy resources can help to decrease the reliance on central generation stations. Presently, distributed energy resources such as solar photovoltaic, wind and bio-mass generation are subsidized in Ontario. Micro-cogeneration is an emerging technology that can be implemented as a distributed energy resource within residential or commercial buildings. Micro-cogeneration has the potential to reduce a building's energy consumption by simultaneously generating thermal and electrical power on-site. The coupling of a micro-cogeneration device with electrical storage can improve the system's ability to reduce peak electricity demands. The performance potential of micro-cogeneration devices has yet to be fully realized. This research addresses the performance of a residential micro-cogeneration device and it's ability to meet peak occupant electrical loads when coupled with electrical storage. An integrated building energy model was developed of a residential micro-cogeneration system: the house, the micro-cogeneration device, all balance of plant and space heating components, a thermal storage device, an electrical storage device, as well as the occupant electrical and hot water demands. This model simulated the performance of a micro-cogeneration device coupled to an electrical storage system within a Canadian household. A customized controller was created in ESP-r to examine the impact of various system control strategies. The economic performance of the system was assessed from the perspective of a local energy distribution company and an end-user under hypothetical electricity export purchase price scenarios. It was found that with certain control strategies the micro-cogeneration system was able to improve the

  12. Economics of electric alternatives to cogeneration in commercial buildings: Final report

    SciTech Connect

    Dobyns, J.; Estey, P.

    1988-10-01

    The economics of packaged cogeneration systems are characterized for five typical commercial applications: office building with computer center, supermarket, fast food restaurant, hospital, and swimming pool/health club. The operation of these systems in each application is evaluated for three utility rate scenarios. Alternative high-efficiency electric technologies for the thermal energy application of each cogeneration package are identified, characterized, and evaluated. The economics of the packaged cogeneration systems are compared with the high-efficiency electric alternatives. 8 refs., 9 figs., 21 tabs.

  13. Cogeneration of Electricity and Potable Water Using The International Reactor Innovative And Secure (IRIS) Design

    SciTech Connect

    Ingersoll, D.T.; Binder, J.L.; Kostin, V.I.; Panov, Y.K.; Polunichev, V.; Ricotti, M.E.; Conti, D.; Alonso, G.

    2004-10-06

    The worldwide demand for potable water has been steadily growing and is projected to accelerate, driven by a continued population growth and industrialization of emerging countries. This growth is reflected in a recent market survey by the World Resources Institute, which shows a doubling in the installed capacity of seawater desalination plants every ten years. The production of desalinated water is energy intensive, requiring approximately 3-6 kWh/m3 of produced desalted water. At current U.S. water use rates, a dedicated 1000 MW power plant for every one million people would be required to meet our water needs with desalted water. Nuclear energy plants are attractive for large scale desalination application. The thermal energy produced in a nuclear plant can provide both electricity and desalted water without the production of greenhouse gases. A particularly attractive option for nuclear desalination is to couple a desalination plant with an advanced, modular, passively safe reactor design. The use of small-to-medium sized nuclear power plants allows for countries with smaller electrical grid needs and infrastructure to add new electrical and water capacity in more appropriate increments and allows countries to consider siting plants at a broader number of distributed locations. To meet these needs, a modified version of the International Reactor Innovative and Secure (IRIS) nuclear power plant design has been developed for the cogeneration of electricity and desalted water. The modular, passively safe features of IRIS make it especially well adapted for this application. Furthermore, several design features of the IRIS reactor will ensure a safe and reliable source of energy and water even for countries with limited nuclear power experience and infrastructure. The IRIS-D design utilizes low-quality steam extracted from the low-pressure turbine to boil seawater in a multi-effect distillation desalination plant. The desalination plant is based on the horizontal

  14. High-Temperature Gas-Cooled Reactor Steam Cycle/Cogeneration Lead Project strategy plan

    SciTech Connect

    1982-03-01

    The strategy for developing the HTGR system and introducing it into the energy marketplace is based on using the most developed technology path to establish a HTGR-Steam Cycle/Cogeneration (SC/C) Lead Project. Given the status of the HTGR-SC/C technology, a Lead Plant could be completed and operational by the mid 1990s. While there is remaining design and technology development that must be accomplished to fulfill technical and licensing requirements for a Lead Project commitment, the major barriers to the realization a HTGR-SC/C Lead Project are institutional in nature, e.g. Project organization and management, vendor/supplier development, cost/risk sharing between the public and private sector, and Project financing. These problems are further exacerbated by the overall pervading issues of economic and regulatory instability that presently confront the utility and nuclear industries. This document addresses the major institutional issues associated with the HTGR-SC/C Lead Project and provides a starting point for discussions between prospective Lead Project participants toward the realization of such a Project.

  15. Cogeneration technology alternatives study. Volume 4: Heat Sources, balance of plant and auxiliary systems

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Data and information established for heat sources balance of plant items, thermal energy storage, and heat pumps are presented. Design case descriptions are given along with projected performance values. Capital cost estimates for representative cogeneration plants are also presented.

  16. Grid-interconnection requirements for small cogeneration systems - Appendix. Final report, September 1985-December 1987

    SciTech Connect

    Iverson, J.R.; Vavrina, R.D.

    1987-12-01

    This report describes the results of an investigation into the performance and cost of interconnection equipment and devices required when a small (40-800 kW gas-engine-driven generator sets) cogeneration installation exports power to the electric utility. Computer modeling and analysis was conducted and served as the basis for analyzing normal and abnormal system operating conditions, developing performance-based interconnection requirements, and evaluating alternative approaches to interconnection. Boundary constraints are established for interconnected cogeneration capacity as a function of cogenerator type (synchronous or induction), utility-circuit capacity, and cogenerator installation location on the utility circuit that result in negligible impact to the utility system during any operating condition.

  17. Grid-interconnection requirements for small cogeneration systems. Final report, September 1985-December 1987

    SciTech Connect

    Iverson, J.R.; Vavrina, R.D.

    1987-09-01

    This report describes the results of an investigation into the performance and cost of interconnection equipment and devices required when a small (40-800 kW gas-engine-driven generator sets) cogeneration installation exports power to the electric utility. Computer modeling and analysis was conducted and served as the basis for analyzing normal and abnormal system operating conditions, developing performance-based interconnection requirements, and evaluating alternative approaches to interconnection. Boundary constraints are established for interconnected cogeneration capacity as a function of cogenerator type (synchronous or induction), utility-circuit capacity, and cogenerator-installation location on the utility circuit that result in negligible impact to the utility system during any operating condition.

  18. Cogeneration of electricity using wood waste as a replacement for fossil fuels. Final report

    SciTech Connect

    1983-01-01

    The experiences of a wood products company in their efforts to work out a cogeneration system using wood wastes are reviewed. Negotiations with the public utility and result of equipment search are described. (MHR)

  19. Micro-cogeneration units based on Stirling engine for heating and their real operation

    NASA Astrophysics Data System (ADS)

    Čierny, Jaroslav; Patsch, Marek

    2014-08-01

    This article was deal with micro-cogeneration units based on Stirling engine. We watched problematic of real working Stirling engine. The article also contain hookup of unit constructed at University of Zilina.

  20. Modelling Residential-Scale Combustion-Based Cogeneration in Building Simulation

    SciTech Connect

    Ferguson, A.; Kelly, N.; Weber, A.; Griffith, B.

    2009-03-01

    This article describes the development, calibration and validation of a combustion-cogeneration model for whole-building simulation. As part of IEA Annex 42, we proposed a parametric model for studying residentialscale cogeneration systems based on both Stirling and internal combustion engines. The model can predict the fuel use, thermal output and electrical generation of a cogeneration device in response to changing loads, coolant temperatures and flow rates, and control strategies. The model is now implemented in the publicly-available EnergyPlus, ESP-r and TRNSYS building simulation programs. We vetted all three implementations using a comprehensive comparative testing suite, and validated the model's theoretical basis through comparison to measured data. The results demonstrate acceptable-to-excellent agreement, and suggest the model can be used with confidence when studying the energy performance of cogeneration equipment in non-condensing operation.

  1. Advanced technology cogeneration system conceptual design study: Closed cycle gas turbines

    NASA Technical Reports Server (NTRS)

    Mock, E. A. T.; Daudet, H. C.

    1983-01-01

    The results of a three task study performed for the Department of Energy under the direction of the NASA Lewis Research Center are documented. The thermal and electrical energy requirements of three specific industrial plants were surveyed and cost records for the energies consumed were compiled. Preliminary coal fired atmospheric fluidized bed heated closed cycle gas turbine and steam turbine cogeneration system designs were developed for each industrial plant. Preliminary cost and return-on-equity values were calculated and the results compared. The best of the three sites was selected for more detailed design and evaluation of both closed cycle gas turbine and steam turbine cogeneration systems during Task II. Task III involved characterizing the industrial sector electrical and thermal loads for the 48 contiguous states, applying a family of closed cycle gas turbine and steam turbine cogeneration systems to these loads, and conducting a market penetration analysis of the closed cycle gas turbine cogeneration system.

  2. Comparison of Integrated Gasifier-Combined Cycle and AFB-steam turbine systems for industrial cogeneration

    NASA Technical Reports Server (NTRS)

    Nainiger, J. J.; Abbott, J. M.; Burns, R. K.

    1981-01-01

    In the cogeneration technology alternatives study (CTAS) a number of advanced coal fired systems were examined and systems using a integrated coal gasifier IGCC or a fluid bed combustor AFB were found to yield attractive cogeneration results in industrial cogeneration applications. A range of site requirements and cogeneration sizing strategies using ground rules based on CTAS were used in comparing an IGCC and an AFB. The effect of time variations in site requirements and the sensitivity to fuel and electricity price assumptions are examined. The economic alternatives of industrial or utility ownership are also considered. The results indicate that the IGCC system has potentially higher fuel and emission savings and could be an attractive option for utility ownership. The AFB steam turbine system has a potentially higher return on investment and could be attractive assuming industrial ownership.

  3. Project considerations and design of systems for wheeling cogenerated power

    SciTech Connect

    Tessmer, R.G. Jr.; Boyle, J.R.; Fish, J.H. III; Martin, W.A.

    1994-08-01

    Wheeling electric power, the transmission of electricity not owned by an electric utility over its transmission lines, is a term not generally recognized outside the electric utility industry. Investigation of the term`s origin is intriguing. For centuries, wheel has been used to describe an entire machine, not just individual wheels within a machine. Thus we have waterwheel, spinning wheel, potter`s wheel and, for an automobile, wheels. Wheel as a verb connotes transmission or modification of forces and motion in machinery. With the advent of an understanding of electricity, use of the word wheel was extended to be transmission of electric power as well as mechanical power. Today, use of the term wheeling electric power is restricted to utility transmission of power that it doesn`t own. Cogeneration refers to simultaneous production of electric and thermal power from an energy source. This is more efficient than separate production of electricity and thermal power and, in many instances, less expensive.

  4. Thermal analysis of solar biomass hybrid co-generation plants

    NASA Astrophysics Data System (ADS)

    Kaushika, N. D.; Mishra, Anuradha; Chakravarty, M. N.

    2005-12-01

    This article describes a co-generation plant based on the biogas being produced from the waste of distillery plant and highlights the possible configuration in which the plant can be hybridized with auxiliary solar energy source having the advantage of using financial incentives in several countries. In hybridization, the solar heat is used for heating the boiler feed water. The solar heat-generating unit consists of line focus parabolic trough collector, heat transportation system and heat delivery unit such as heat exchanger. The simulation model of heat and mass transfer processes in the solar field as well as the balance of the system is developed to investigate the technological feasibility of the concept in terms of plant yield and matching of subsystems.

  5. PV/cogeneration hybrid system nets large contract

    SciTech Connect

    Not Available

    1987-09-01

    Alpha Solarco Inc. announced on May 18, 1987 the signing of two $175 million exclusive development contracts with the Pawnee and Otoe-Missouria Tribes of Oklahoma to build two 70,000-kilowatt photovoltaic electric generating stations on Tribal lands in Oklahoma to supply Indian and other requirements. The projects, to be built in four phases, will each consists of 35,000 kilowatts of photovoltaic generating capacity to be supplied by the company's proprietary Modular Solar-Electric Photovoltaic Generator (MSEPG), and 35,000 kilowatts of gas-fired cogeneration. Alpha Solarco is starting to build and finance itself a 500-kilowatt demonstration plant as the initial step in the first project. This plant will be used to demonstrate that proven MSEPG design and technology can be integrated in electric utility systems, either as a base-load generator for small utilities, or as a peak-shaving device for large ones.

  6. Cogeneration Technology Alternatives Study (CTAS). Volume 4: Energy conversion systems

    NASA Technical Reports Server (NTRS)

    Brown, D. H.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed-cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum-based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. The advanced and commercially available cogeneration energy conversion systems studied in CTAS are fined together with their performance, capital costs, and the research and developments required to bring them to this level of performance.

  7. Case study of McCormick place cogeneration project

    SciTech Connect

    Overstreet, E.L.

    1994-12-31

    In the authors business of providing district energy services, competition is the key to his being able to have a positive impact on the environment, business stability, and economic activity. In the district energy industry, the competitive options are for property owners to continue to self generate energy to meet their needs, purchase energy from a company that utilizes electricity during off-peak hours to produce chilled water or take advantage of a total solution of purchasing tri-generation energy from Trigen-Peoples District Energy Company. Tri-generation is an innovative technology which involves the simultaneous production of steam, chilled water, and electricity. The McCormick Place cogeneration project calls for producing steam and chilled water (co-) for use by the Metropolitan Pier and Exposition Authority (MPEA). The plant will produce electricity (tri-) to run the production equipment.

  8. Cogeneration Technology Alternatives Study (CTAS). Volume 4: Energy conversion systems

    NASA Astrophysics Data System (ADS)

    Brown, D. H.; Gerlaugh, H. E.; Priestley, R. R.

    1980-04-01

    Industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed-cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum-based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. The advanced and commercially available cogeneration energy conversion systems studied in CTAS are fined together with their performance, capital costs, and the research and developments required to bring them to this level of performance.

  9. Cogeneration technology alternatives study. Volume 6: Computer data

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The potential technical capabilities of energy conversion systems in the 1985 - 2000 time period were defined with emphasis on systems using coal, coal-derived fuels or alternate fuels. Industrial process data developed for the large energy consuming industries serve as a framework for the cogeneration applications. Ground rules for the study were established and other necessary equipment (balance-of-plant) was defined. This combination of technical information, energy conversion system data ground rules, industrial process information and balance-of-plant characteristics was analyzed to evaluate energy consumption, capital and operating costs and emissions. Data in the form of computer printouts developed for 3000 energy conversion system-industrial process combinations are presented.

  10. Energy recovery and cogeneration from an existing municipal incinerator

    NASA Astrophysics Data System (ADS)

    Crego, D. F.; Eller, V. L.; Stephenson, J. W.

    1982-02-01

    An existing 727 TPD incinerator burning mixed municipal refuse was deemed to be a feasible candidate for a cogeneration energy retrofit. It is indicated that equipment and construction of the retrofit will cost $17.6 million or $24,200/rated tonne in 1980 dollars; air pollution control equipment will cost 10.4 million or $14,300/tonne. Furnace temperature and gas samplings along with pilot air pollution control equipment tests were conducted. Refuse was characterized on both wet and dry seasons. Final design is based upon burning 155,000 TPY of refuse from which can be generated, sufficient steam and electricity for inhouse use and an additional amount of 64 million kWh for sale.

  11. Advanced coal-fueled industrial cogeneration gas turbine system

    SciTech Connect

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  12. 1992 National census for district heating, cooling and cogeneration

    SciTech Connect

    Not Available

    1993-07-01

    District energy systems are a major part of the energy use and delivery infrastructure of the United States. With nearly 6,000 operating systems currently in place, district energy represents approximately 800 billion BTU per hour of installed thermal production capacity, and provides over 1.1 quadrillion BTU of energy annually -- about 1.3% of all energy used in the US each year. Delivered through more that 20,000 miles of pipe, this energy is used to heat and cool almost 12 billion square feet of enclosed space in buildings that serve a diverse range of office, education, health care, military, industrial and residential needs. This Census is intended to provide a better understanding of the character and extent of district heating, cooling and cogeneration in the United States. It defines a district energy system as: Any system that provides thermal energy (steam, hot water, or chilled water) for space heating, space cooling, or process uses from a central plant, and that distributes the energy to two or more buildings through a network of pipes. If electricity is produced, the system is a cogenerating facility. The Census was conducted through surveys administered to the memberships of eleven national associations and agencies that collectively represent the great majority of the nation`s district energy system operators. Responses received from these surveys account for about 11% of all district systems in the United States. Data in this report is organized and presented within six user sectors selected to illustrate the significance of district energy in institutional, community and utility settings. Projections estimate the full extent of district energy systems in each sector.

  13. Advanced gas engine cogeneration technology for special applications

    SciTech Connect

    Plohberger, D.C.; Fessl, T.; Gruber, F.; Herdin, G.R.

    1995-10-01

    In recent years gas Otto-cycle engines have become common for various applications in the field of power and heat generation. Gas engines are chosen sometimes even to replace diesel engines, because of their clean exhaust emission characteristics and the ample availability of natural gas in the world. The Austrian Jenbacher Energie Systeme AG has been producing gas engines in the range of 300 to 1,600 kW since 1960. The product program covers state-of-the-art natural gas engines as well as advanced applications for a wide range of alterative gas fuels with emission levels comparable to Low Emission (LEV) and Ultra Low Emission Vehicle (ULEV) standards. In recent times the demand for special cogeneration applications is rising. For example, a turnkey cogeneration power plant for a total 14.4 MW electric power and heat output consisting of four JMS616-GSNLC/B spark-fired gas engines specially tuned for high altitude operation has been delivered to the well-known European ski resort of Sestriere. Sestriere is situated in the Italian Alps at an altitude of more than 2,000 m above sea level. The engines feature a turbocharging system tuned to an ambient air pressure of only 80 kPa to provide an output and efficiency of each 1.6 MW and up to 40% {at} 1,500 rpm, respectively. The ever-increasing demand for lower pollutant emissions in the US and some European countries initiates developments in new exhaust aftertreatment technologies. Thermal reactor and Selective Catalytic Reduction (SCR) systems are used to reduce tailpipe CO and NO{sub x} emissions of engines. Both SCR and thermal reactor technology will shift the engine tuning to achieve maximum efficiency and power output. Development results are presented, featuring the ultra low emission potential of biogas and natural gas engines with exhaust aftertreatment.

  14. Analysis of Homogeneous Charge Compression Ignition (HCCI) Engines for Cogeneration Applications

    SciTech Connect

    Aceves, S; Martinez-Frias, J; Reistad, G

    2004-04-30

    This paper presents an evaluation of the applicability of Homogeneous Charge Compression Ignition Engines (HCCI) for small-scale cogeneration (less than 1 MWe) in comparison to five previously analyzed prime movers. The five comparator prime movers include stoichiometric spark-ignited (SI) engines, lean burn SI engines, diesel engines, microturbines and fuel cells. The investigated option, HCCI engines, is a relatively new type of engine that has some fundamental differences with respect to other prime movers. Here, the prime movers are compared by calculating electric and heating efficiency, fuel consumption, nitrogen oxide (NOx) emissions and capital and fuel cost. Two cases are analyzed. In Case 1, the cogeneration facility requires combined power and heating. In Case 2, the requirement is for power and chilling. The results show that the HCCI engines closely approach the very high fuel utilization efficiency of diesel engines without the high emissions of NOx and the expensive diesel fuel. HCCI engines offer a new alternative for cogeneration that provides a unique combination of low cost, high efficiency, low emissions and flexibility in operating temperatures that can be optimally tuned for cogeneration systems. HCCI engines are the most efficient technology that meets the oncoming 2007 CARB NOx standards for cogeneration engines. The HCCI engine appears to be a good option for cogeneration systems and merits more detailed analysis and experimental demonstration.

  15. Evaluation of the heating operation and transmission district: Feasibility of cogeneration. Final report

    SciTech Connect

    Cable, J.H.; Gilday, L.T.; Moss, M.E.

    1995-11-01

    The General Services Administration, through its National Capital Region, operates a district heating system - called the Heating Operation and Transmission District - that provides steam to approximately 100 government buildings in Washington, D.C. HOTD is examining a host of options that will improve its ability to provide reliable, environmentally sound, and cost-effective service to its customers. This report evaluates one of those options - cogeneration, a technology that would enable HOTD to produce steam and electricity simultaneously. The study concluded that, under current regulations, cogeneration is not attractive economically because the payback period (15 years) exceeds Federal return-on-investment guidelines. However, if the regulatory environment changes to allow wheeling (transmission of power by a non-utility power producer to another user), cogeneration would be attractive; HOTD would save anywhere from $38 million to $118 million and the investment would pay back in 7 to 10 years. Although incorporating cogeneration into the HOTD system has no strong benefit at this time, the report recommends that GSA reevaluate cogeneration in one or two years because Federal regulations regarding wheeling are under review. It also recommends that GSA work with the District of Columbia government to develop standards for cogeneration.

  16. HTGR-process steam/cogeneration and HTGR-steam cycle program. Semiannual report, October 1, 1979-March 31, 1980

    SciTech Connect

    Not Available

    1980-09-01

    Progress in the design of an 1170-MW(t) High-Temperature Gas-Cooled Reactor (HTGR) Nuclear Steam Supply (NSS) is described. This NSS can integrate favorably into present petrochemical and primary metal process industries, heavy oil recovery operations, and future shale oil recovery and synfuel processes. The economics appear especially attractive in comparison with alternative coal-fired steam generation. Cost estimates for central station power-generating 2240- and 3360-MW(t) HTGR-Steam Cycle (HTGR-SC) plants are updated. The 2240-MW(t) HTGR-SC is treated to a probabilistic risk evaluation. Compared with the earlier 3000-MW(t) design, the results predict a slightly increased risk of core heatup, owing to the result of eliminating the capability of the boiler feed pump to operate at atmospheric backpressure. The differences in risk, however, are within the calculational uncertainties. Preliminary results of the ranking of safety enhancement features for the 1170-MW(t) HTGR indicate that the following modifications offer the most promise: (1) capability for main loop rundown, (2) natural circulation core auxiliary cooling, and (3) PCRV blowdown capability through the helium purification system to minimize activity release during some core heatups.

  17. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    NASA Technical Reports Server (NTRS)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  18. Development of micro-cogeneration system with porous catalyst microcombustor

    NASA Astrophysics Data System (ADS)

    Takahashi, S.; Tanaka, M.; Ieda, N.; Ihara, T.

    2015-10-01

    A self-standing micro-cogeneration system was developed by coupling a microcombustor, thermoelectric (TE) modules, and an air supply device. The microcombustor has a porous monolithic Pt catalyst layer, and a combustion efficiency of 90% was achieved. A microblower is used to supply air to the combustor, and it is driven by electricity from the Bi-Te TE modules through a dc-dc converter. We investigated the optimal point where the output became maximal and the system was self-standing. At the optimal point, the input fuel enthalpy was 13.2 W, and 440 mW of electricity was generated from the TE modules. The microblower consumed 280 mW, and the net generated electricity was 160 mW. Therefore, the final thermal efficiency was 1.21%. The net thermal efficiency of the developed system was the same magnitude as that of TeeDee01 (COX Co. Ltd.), the world’s smallest model plane engine (0.163 cc), even though the magnitude of the output power was less than 1/20 in comparison.

  19. Development of Micro Cogeneration System with a Porous Catalyst Microcombustor

    NASA Astrophysics Data System (ADS)

    Takahashi, S.; Tanaka, M.; Ieda, N.; Ihara, T.

    2014-11-01

    The self-standing micro cogeneration system by coupling a microcombustor, thermoelectric modules and an air supply device was developed. The microcombustor has a porous monolithic Pt catalyst layer and the combustion efficiency of 90% was attained. A micro-blower was used to supply air to the combustor, and it was driven by a part of the electricity from the Bi-Te TE modules through a DC-DC converter. We investigated the optimal point where the output became maximal and the system stood by itself. At the optimal point, the input fuel enthalpy was 13.2W and the electricity of 403mW was generated from the TE modules. The micro blower used 280mW and the net electricity was 123mW. Therefore the final thermal efficiency was 0.93%. The efficiency was the same magnitude of the world smallest model plane engine TeeDee01 (COX Co. Ltd.) although the thermal input was less than its 1/20.

  20. Supercritical biodiesel production and power cogeneration: technical and economic feasibilities.

    PubMed

    Deshpande, A; Anitescu, G; Rice, P A; Tavlarides, L L

    2010-03-01

    An integrated supercritical fluid technology with power cogeneration to produce biodiesel fuels, with no need for the costly separations involved with the conventional technology, is proposed, documented for technical and economic feasibility, and preliminarily designed. The core of the integrated system consists of the transesterification of various triglyceride sources (e.g., vegetable oils and animal fats) with supercritical methanol/ethanol. Part of the reaction products can be combusted by a diesel power generator integrated in the system which, in turn, provides the power needed to pressurize the system and the heat of the exhaust gases necessary in the transesterification step. The latter energy demand can also be satisfied by a fired heater, especially for higher plant capacities. Different versions of this system can be implemented based on the main target of the technology: biodiesel production or diesel engine applications, including power generation. The process options considered for biodiesel fuel production estimate break-even processing costs of biodiesel as low as $0.26/gal ($0.07/L) with a diesel power generator and $0.35/gal ($0.09/L) with a fired heater for a plant capacity of 15,000 gal/day (56,775 L/day). Both are significantly lower than the current processing costs of approximately $0.51/gal ($0.13/L) of biodiesel produced by conventional catalytic methods. A retail cost of biodiesel produced by the proposed method is likely to be competitive with the prices of diesel fuels.

  1. Cogeneration Technology Alternatives Study (CTAS). Volume 1: Summary report

    NASA Technical Reports Server (NTRS)

    Gerlaugh, H. E.; Hall, E. W.; Brown, D. H.; Priestley, R. R.; Knightly, W. F.

    1980-01-01

    Large savings can be made in industry by cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers. About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidates which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed-cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum-based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules for determining performance and cost in individual plants and on a national level. It was found that: (1) atmospheric and pressurized fluidized bed steam turbine systems were the most attractive of the direct coal-fired systems; and (2) open-cycle gas turbines with heat recovery steam generators and combined-cycles with NO(x) emission reduction and moderately increased firing temperatures were the most attractive of the coal-derived liquid-fired systems.

  2. Gas-engine-based, low-emission cogeneration units

    SciTech Connect

    Chellini, R.

    1994-04-01

    Continental Energy Systems (CES) of Westmalle, Belgium, has been specializing, since its foundation in 1983, in the supply of cogeneration packages in the 50-300 KW power range. CES activity is mainly concentrated in the transformation of Valmet, Scania, Iveco and MAN diesel engines into spark-ignited engines capable of running on natural gas, CNG, LPG, biogas, landfill gas, etc. In the upper power range they also package Waukesha gas engines supplied from the Dutch plant of the American engine manufacturer. The new closed-loop combustion control system allows engines in the naturally-aspirated or turbocharged configuration with catalytic converters to operate well below Euro 2 limits. In fact, these engines already comply with 1995 CARB (California Air Resources Board) emission limits and with those that will become mandatory in Europe with the 1996 step. The new system still makes use of conventional components for metering and mixing functions, but these are considered as three separate devices; the electronic control unit, the oxygen sensor and an actuator enabling closed loop air/fuel ratio control. 4 figs.

  3. Lubrication contributes to improved landfill cogeneration plant operation

    SciTech Connect

    1995-10-01

    The Prince George`s county, Maryland, cogeneration plant consists of three lean-burn, 12-cylinder, Waukesha 5790GL turbocharged gas engines, each powering an 850 kW Kato generator. Four Waukesha F1197G engines run gas compressors that draw and compress gas from the landfill, pumping an average of 28000 m{sup 3}/day at 6.2 bar from 29 wells. Landfill gas is 50% methane, 30% carbon dioxide, 10% nitrogen and 10% other gas constituents. These other gas constituents consist of 160 chemical compounds, many of which are very destructive to engines and other equipment. Probably the worst of these are the total organic halide expressed as chloride (TOH/CL), formed from the decomposition of household cleaning preparations and other materials containing chlorides. Landfill gas also contains an abundance of water, which combines not only with the TOH/CLs but with oxides of nitrogen, which are by-products of the combustion process, to form acids. To handle the highly contaminated landfill gas, the Waukesha Engine Division and people from Curtis Engine and Equipment modified the equipment and maintenance practices. One of the first changes was in lubrication. Curtis switched from a standard gas engine oil to Mobile Pegasus 446 oil, an SAE 40 oil that has a total base number (TBN) of 9.5, because of its extended acid-neutralizing capabilities.

  4. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    NASA Astrophysics Data System (ADS)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-04-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  5. Wastewater treatment facilities: Energy efficient improvements and cogeneration

    SciTech Connect

    Kunkle, R.; Gray, R.; Delzel, D.

    1992-10-01

    The Washington State Energy Office (WSEO) has worked with both the Bonneville Power Administration (BPA) and the US Department of Energy to provide technical and financial assistance to local governments. Based on a recent study conducted by Ecotope for WSEO, local governments spend an estimated $45 million on utility bills statewide. Water and wastewater facilities account for almost a third of this cost. As a result, WSEO decided to focus its efforts on the energy intensive water and wastewater sector. The ultimate goal of this project was to develop mechanisms to incorporate energy efficiency improvements into wastewater treatment facilities in retrofits and during upgrades, remodels, and new construction. Project activities included the following: The review of the existing regulatory environment for treatment system construction, A summary of financing options for efficiency improvements in treatment facilities, A literature review of energy efficiency opportunities in treatment plants, Survey and site visits to characterize existing facilities in Washington State, Estimates of the energy efficiency and cogeneration potential in the sector, and A case study to illustrate the implementation of an efficiency improvement in a treatment facility.

  6. Feasibility study for retrofitting biogas cogeneration systems to district heating in South Korea.

    PubMed

    Chung, Mo; Park, Hwa-Choon

    2015-08-01

    A feasibility study was performed to assess the technical and economic merits of retrofitting biogas-based cogeneration systems to district heating networks. Three district heating plants were selected as candidates for accommodating heat recovery from nearby waste treatment stations, where a massive amount of biogas can be produced on a regular basis. The scenario involves constructing cogeneration systems in each waste treatment station and producing electricity and heat. The amounts of biogas production for each station are estimated based on the monthly treatment capacities surveyed over the most recent years. Heat produced by the cogeneration system is first consumed on site by the waste treatment system to keep the operating temperature at a proper level. If surplus heat is available, it will be transported to the nearest district heating plant. The year-round operation of the cogeneration system was simulated to estimate the electricity and heat production. We considered cost associated with the installation of the cogeneration system and piping as initial investments. Profits from selling electricity and recovering heat are counted as income, while costs associated with buying biogas are expenses. Simple payback periods of 2-10 years were projected under the current economic conditions of South Korea. We found that most of the proposed scenarios can contribute to both energy savings and environmental protection.

  7. Avoided costs associated with cogeneration: a case study of Con Ed

    SciTech Connect

    Bright, R.; Davitian, H.; Martorella, J.

    1980-08-01

    The potential impact of cogeneration in office and apartment buildings in New York City on the Consolidated Edison Company (Con Ed) has been investigated using a method of utility cost and fuel use analysis developed at Brookhaven National Laboratory. This method computes a utility's long run marginal costs and long run marginal fuel consumption associated with load modifications due to the introduction of on-site energy producing technologies. The principal findings of this study show that Con Ed's long run average cost is more likely to go down than up due to cogeneration in office and apartment building; the utility's avoided costs (i.e., its long run marginal savings) associated with the gross power output of the cogeneration systems are 10.5 cents/KWh for the office building and 6.4 cents/KWh for the apartment buildings; the utility's marginal savings include a component for avoided capacity costs; and there are net savings in the use of oil due to cogeneration (assuming the building used oil for its boilers before it switched and diesel fuel in its cogenerators afterwards).

  8. Feasibility study for retrofitting biogas cogeneration systems to district heating in South Korea.

    PubMed

    Chung, Mo; Park, Hwa-Choon

    2015-08-01

    A feasibility study was performed to assess the technical and economic merits of retrofitting biogas-based cogeneration systems to district heating networks. Three district heating plants were selected as candidates for accommodating heat recovery from nearby waste treatment stations, where a massive amount of biogas can be produced on a regular basis. The scenario involves constructing cogeneration systems in each waste treatment station and producing electricity and heat. The amounts of biogas production for each station are estimated based on the monthly treatment capacities surveyed over the most recent years. Heat produced by the cogeneration system is first consumed on site by the waste treatment system to keep the operating temperature at a proper level. If surplus heat is available, it will be transported to the nearest district heating plant. The year-round operation of the cogeneration system was simulated to estimate the electricity and heat production. We considered cost associated with the installation of the cogeneration system and piping as initial investments. Profits from selling electricity and recovering heat are counted as income, while costs associated with buying biogas are expenses. Simple payback periods of 2-10 years were projected under the current economic conditions of South Korea. We found that most of the proposed scenarios can contribute to both energy savings and environmental protection. PMID:26159562

  9. Feasibility of a medium-size central cogenerated energy facility, energy management memorandum

    NASA Astrophysics Data System (ADS)

    Porter, R. W.

    1982-09-01

    The thermal-economic feasibility was studied of a medium-size central cogenerated energy facility designed to serve five varied industries. Generation options included one dual-fuel diesel and one gas turbine, both with waste heat boilers, and five fired boilers. Fuels included natural gas, and for the fired-boiler cases, also low-sulphur coal and municipal refuse. The fired-boiler cogeneration systems employed back-pressure steam turbines. For coal and refuse, the option of steam only without cogeneration was also assessed. The refuse-fired cases utilized modular incinerators. The options provided for a wide range of steam and electrical capacities. Deficient steam was assumed generated independently in existing equipment. Excess electrical power over that which could be displaced was assumed sold to Commonwealth Edison Company under PURPA (Public Utility Regulator Policies Act). The facility was assumed operated by a mutually owned corporation formed by the cogenerated power users. The economic analysis was predicted on currently applicable energy-investment tax credits and accelerated depreciation for a January 1985 startup date. Based on 100% equity financing, the results indicated that the best alternative was the modular-incinerator cogeneration system.

  10. Technical and economic analysis of steam-injected gas-turbine cogeneration

    NASA Astrophysics Data System (ADS)

    Larson, Eric D.; Williams, Robert H.

    1985-11-01

    Industrial cogeneration is gaining popularity as an energy and money saving alternative to separate steam and electricity generation. Among cogeneration technologies, gas-turbine systems are attractive largely because of their lower capital cost and high thermodynamic efficiency. However, at industrial plants where steam and electricity loads vary daily, seasonally, or unpredictably, the economics of conventional gas turbines are often unfavorable due to low capacity utilization. Steam-injected gas-turbine cogeneration overcomes the part-load problem by providing for excess steam to be injected back into the turbine to raise electrical output and generating efficiency. Under provisions of the Public Utilities Regulatory Policies Act, any excess electricity can be sold to the local grid at the prevailing avoided cost of electricity. Steam-injected gas-turbine cogeneration can result in a consistently high rate of return on investment over a wide range of variation in process steam loads. Moreover, this technology can also give rise to greater annual electricity production and fuel savings per unit of process steam generated, compared to simple-cycle cogeneration, making the technology attractive from the perspective of society, as well as that of the user. Steam-injected gas-turbines may soon find applications in electric utility base-load generation, as well, since it appears that electrical generating efficiencies in excess of 50% can be obtained from turbines producing of the order of 100 MW of electricity at a fully-installed capital cost as low as 500/kW.

  11. 76 FR 60819 - Mt. Poso Cogeneration Company, LLC; Supplemental Notice That Initial Market-Based Rate Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-30

    ... Energy Regulatory Commission Mt. Poso Cogeneration Company, LLC; Supplemental Notice That Initial Market... in the above-referenced proceeding of Mt. Poso Cogeneration Company, LLC's application for market... by clicking on the appropriate link in the above list. They are also available for review in...

  12. Follow-up cogeneration institutional study in the Geismar, Louisiana and Orange, Texas areas

    SciTech Connect

    Not Available

    1981-09-01

    The passage of regulations implementing the National Energy Act of 1978 is the major change in the regulatory environment. The major objective of this study is to determine the extent to which these regulations have affected the various parties to a cogeneration project. The technical and financial aspects of cogeneration were not reevaluated, but interviews were conducted with federal and state government officials, industrial energy users and the local utilities to get a better understanding of their current institutional problems. This follow-up study investigates the history of regulatory and other activities since the previous study. A summary is presented of regulations enacted regarding the National Energy Act, as well as other government actions such as tax legislation. Known actions of industry and the utilities are also summarized. This study reports in detail on the perceptions of industry, utility, and regulatory bodies on the economics and viability of cogeneration in the new political and regulatory climate.

  13. Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

    NASA Technical Reports Server (NTRS)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

  14. Potential for cogeneration of heat and electricity in California industry, phase 2

    NASA Technical Reports Server (NTRS)

    Davis, H. S.; Edelson, E.; Kashani, A. K.; Slonski, M. L.

    1979-01-01

    The nontechnical issues of industrial cogeneration for 12 California firms were analyzed under three categories of institutional settings: (1) industrial ownership without firm sales of power; (2) industrial ownership with firm sales of power; and (3) utility or third party ownership. Institutional issues were analyzed from the independent viewpoints of the primary parties of interest: the industrial firms, the electric utilities and the California Public utilities Commission. Air quality regulations and the agencies responsible for their promulgation were examined, and a life cycle costing model was used to evaluate the economic merits of representative conceptual cogeneration systems at these sites. Specific recommendations were made for mitigating measures and regulatory action relevant to industrial cogeneration in California.

  15. Utility reduces fuel cost with heat recovery, industrial byproduct fuel, cogeneration

    SciTech Connect

    Holland, R.J.

    1982-02-01

    A 50-MW North Dakota power plant is refurbished to recover major waste-heat sources. Use of agricultural byproduct fuel and cogeneration also helps to cut future costs. The plant is saving on fuel costs by burning 150-200 tons/day of sunflower seed hulls from a local processing plant. The hulls are pulverized and mixed with the primary fuel, North Dakota lignite. At the same time, the processing plant that supplies the sunflower hulls buys steam from the power plant, thus giving the utility some of the economic benefits of cogeneration.

  16. Thermionic cogeneration burner assessment study. Third quarterly technical progress report, April-June, 1983

    SciTech Connect

    Not Available

    1983-01-01

    The specific tasks of this study are to mathematically model the thermionic cogeneration burner, experimentally confirm the projected energy flows in a thermal mock-up, make a cost estimate of the burner, including manufacturing, installation and maintenance, review industries in general and determine what groups of industries would be able to use the electrical power generated in the process, select one or more industries out of those for an in-depth study, including determination of the performance required for a thermionic cogeneration system to be competitive in that industry. Progress is reported. (WHK)

  17. Central-station solar hydrogen power plant.

    SciTech Connect

    Diver, Richard B., Jr.; Siegel, Nathan Phillip; Kolb, Gregory J.

    2005-04-01

    Solar power towers can be used to make hydrogen on a large scale. Electrolyzers could be used to convert solar electricity produced by the power tower to hydrogen, but this process is relatively inefficient. Rather, efficiency can be much improved if solar heat is directly converted to hydrogen via a thermochemical process. In the research summarized here, the marriage of a high-temperature ({approx}1000 C) power tower with a sulfuric acid/hybrid thermochemical cycle was studied. The concept combines a solar power tower, a solid-particle receiver, a particle thermal energy storage system, and a hybrid-sulfuric-acid cycle. The cycle is 'hybrid' because it produces hydrogen with a combination of thermal input and an electrolyzer. This solar thermochemical plant is predicted to produce hydrogen at a much lower cost than a solar-electrolyzer plant of similar size. To date, only small lab-scale tests have been conducted to demonstrate the feasibility of a few of the subsystems and a key immediate issue is demonstration of flow stability within the solid-particle receiver. The paper describes the systems analysis that led to the favorable economic conclusions and discusses the future development path.

  18. Cogenerating a Competency-based HRM Degree: A Model and Some Lessons from Experience.

    ERIC Educational Resources Information Center

    Wooten, Kevin C.; Elden, Max

    2001-01-01

    A competency-based degree program in human resource management was co-generated by six groups of stakeholders who synthesized competency models using group decision support software. The program focuses on core human resource processes, general business management, strategic decision making and problem solving, change management, and personal…

  19. Cogeneration : A Regulatory Guide to Leasing, Permitting, and Licensing in Idaho, Montana, Oregon, and Washington.

    SciTech Connect

    Deshaye, Joyce; Bloomquist, R.Gordon

    1992-12-01

    This guidebook focuses on cogeneration development. It is one of a series of four guidebooks recently prepared to introduce the energy developer to the federal, state and local agencies that regulate energy facilities in Idaho, Montana, Oregon, and Washington (the Bonneville Power Administration Service Territory). It was prepared specifically to help cogeneration developers obtain the permits, licenses and approvals necessary to construct and operate a cogeneration facility. The regulations, agencies and policies described herein are subject to change. Changes are likely to occur whenever energy or a project becomes a political issue, a state legislature meets, a preexisting popular or valuable land use is thought threatened, elected and appointed officials change, and new directions are imposed on states and local governments by the federal government. Accordingly, cogeneration developers should verify and continuously monitor the status of laws and rules that might affect their plans. Developers are cautioned that the regulations described herein may only be a starting point on the road to obtaining all the necessary permits.

  20. External review of the thermal energy storage (TES) cogeneration study assumptions. Final report

    SciTech Connect

    Lai, B.Y.; Poirier, R.N.

    1996-08-01

    This report is to provide a detailed review of the basic assumptions made in the design, sizing, performance, and economic models used in the thermal energy storage (TES)/cogeneration feasibility studies conducted by Pacific Northwest Laboratory (PNL) staff. This report is the deliverable required under the contract.

  1. Starting the water treatment system of the 410-MW combined-cycle plant at the Krasnodar cogeneration station

    NASA Astrophysics Data System (ADS)

    Panteleev, A. A.; Zhadan, A. V.; Gromov, S. L.; Tropina, D. V.; Arkhipova, O. V.

    2012-07-01

    The process diagram of a water treatment plant constructed on the basis of integrated membrane technologies with the use of two-stage reverse osmosis for the PGU-410 power unit at the Krasnodar cogeneration station is presented.

  2. Review of a report Industrial Cogeneration Potential (1980 to 2000). Phase II. Peer review and application of a data base

    SciTech Connect

    Not Available

    1983-02-22

    This paper investigates the potential value of the Industrial Plant Energy Profile (GEA/IPEP) owned by the General Energy Associates (GEA) to serve as a data base for the prediction of the industrial cogeneration potential. A preceding report presented a critical review of the methodology applied by GEA in their report entitled Industrial Cogeneration Potential (1980 to 2000). In its conclusions, this paper will describe three major factors in the GEA report, which will adversely affect their findings regarding the future potential for industrial cogeneration. The paper will further make a number of recommendations conducive to a more stringent application of the data base leading to a realistic assessment of the future cogeneration potential.

  3. 76 FR 22695 - Yuba City Cogenerations Partners, LP; Supplemental Notice That Initial Market-Based Rate Filing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-22

    ... notice in the above-referenced proceeding of Yuba City Cogeneration Partners, LP's application for market... by clicking on the appropriate link in the above list. They are also available for review in...

  4. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 2: Residual-fired nocogeneration process boiler

    NASA Technical Reports Server (NTRS)

    Knightly, W. F.

    1980-01-01

    Computer generated data on the performance of the cogeneration energy conversion system are presented. Performance parameters included fuel consumption and savings, capital costs, economics, and emissions of residual fired process boilers.

  5. Fort Hood solar cogeneration facility conceptual design study. Volume 1: Technical report

    NASA Astrophysics Data System (ADS)

    1981-08-01

    A solar heated heat transfer salt provides heat to a steam generation and provides space heating and air conditioning and hot water for the complex. The site and its climate are described briefly. Candidate site specific system configurations, technology assessments, system sizing, and the results of numerous trade studies leading toward the selection of the preferred system configuration are presented. A system level conceptual design of the cogeneration facility is presented, and the conceptual design of the subsystems (heliostats, receiver, tower, energy transport and storage, fossil energy subsystem, electric power generation subsystem, control, space conditioning and domestic hot water subsystem) are described. Results of the economic analysis of the cogeneration facility are presented, including a description of analysis methods used, assumptions and rationale, simulation models used, a brief summary of capital and operations and maintenance costs, fuel savings, results of the economic evaluations and an economic scenario for future applications.

  6. Conceptual design of a solar cogeneration facility industrial process heat, category A. Executive summary

    NASA Astrophysics Data System (ADS)

    Joy, P.; Brzeczek, M.; Seilestad, H.; Silverman, C.; Yenetchi, G.

    1981-07-01

    The conceptual design of a central receiver solar cogeneration facility at a California oil field is described. The process of selecting the final cogeneration system configuration is described and the various system level and subsystem level tradeoff studies are presented, including the system configuration study, technology options, and system sizing. The facility is described, and the functional aspects, requirements operational characteristics, and performance are discussed. Capital and operating costs, safety, environmental, regulatory issues and potential limiting considerations for the design are included. Each subsystem is described in detail including a discussion of the functional requirements, design, operating characteristics performance estimates and a top level cost estimate. An economic assessment is performed to determine the near-term economic viability of the project and to examine the impact of variations in major economic parameters such as capital and operating and maintenance costs on economic viability. Two measures of economic viability used are levelized energy cost and net present value.

  7. Cogeneration Technology Alternatives Study (CTAS). Volume 2: Comparison and evaluation of results

    NASA Technical Reports Server (NTRS)

    1984-01-01

    CTAS compared and evaluated various advanced energy conversion systems that can use coal or coal-derived fuels for industrial cogeneration applications. The principal aim of the study was to provide information needed by DOE to establish research and development (R&D) funding priorities for advanced-technology systems that could significantly advance the use of coal or coal-derived fuels in industrial cogeneration. Steam turbines, diesel engines, open-cycle gas turbines, combined cycles, closed-cycle gas turbines, Stirling engines, phosphoric acid fuel cells, molten carbonate fuel cells, and thermionics were studied with technology advancements appropriate for the 1985-2000 time period. The various advanced systems were compared and evaluated for a wide diversity of representative industrial plants on the basis of fuel energy savings, annual energy cost savings, emissions savings, and rate of return on investment (ROI) as compared with purchasing electricity from a utility and providing process heat with an on-site boiler.

  8. Electric co-generation units equipped with wood gasifier and Stirling engine

    SciTech Connect

    Bartolini, C.M.; Caresana, F.; Pelagalli, L.

    1998-07-01

    The disposal of industrial waste such as oil sludges, waste plastic, lubricant oils, paper and wood poses serious problems due to the ever increasing amount of material to be disposed of and to the difficulty in finding new dumping sites. The interest in energy recovery technologies is accordingly on the increase. In particular, large amounts of waste wood are simply burned or thrown away causing considerable environmental damage. In this context the co-generation technique represents one of the possible solutions for efficient energy conversion. The present paper proposes the employment of a Stirling engine as prime mover in a co-generation set equipped with a wood gasifier. A Stirling engine prototype previously developed in a joint project with Mase Generators, an Italian manufacturer of fixed and portable electrogenerators, is illustrated and its design is described.

  9. Conceptual design study of a coal gasification combined-cycle powerplant for industrial cogeneration

    NASA Technical Reports Server (NTRS)

    Bloomfield, H. S.; Nelson, S. G.; Straight, H. F.; Subramaniam, T. K.; Winklepleck, R. G.

    1981-01-01

    A conceptual design study was conducted to assess technical feasibility, environmental characteristics, and economics of coal gasification. The feasibility of a coal gasification combined cycle cogeneration powerplant was examined in response to energy needs and to national policy aimed at decreasing dependence on oil and natural gas. The powerplant provides the steam heating and baseload electrical requirements while serving as a prototype for industrial cogeneration and a modular building block for utility applications. The following topics are discussed: (1) screening of candidate gasification, sulfur removal and power conversion components; (2) definition of a reference system; (3) quantification of plant emissions and waste streams; (4) estimates of capital and operating costs; and (5) a procurement and construction schedule. It is concluded that the proposed powerplant is technically feasible and environmentally superior.

  10. University buys $530,000 cogeneration system only to shave peak demand

    SciTech Connect

    Gardner, L.

    1984-05-14

    The University of Richmond will use a cogeneration system during the four summer months to lower peak demand and save about $125,000. The school expects a four-year payback for its $530,000 investment. Because the school's demand charge of 2.5 cents per kilowatt hour is based on the average peak of the summer months, demand charge will be based on about 1025 kW instead of 3500 kW once the cogeneration system is operating. The system will combine a 725-kW generator and engine in a single unit, with the turbine driven by a gas-fired engine. The system will generate 700,000 kWh and save another 300,000 kWh by recovering waste heat for an absorption chiller. Four competitors bid on the project, which was given to Waukesha Engine Division of Dresser Industries.

  11. Cogeneration Technology Alternatives Study (CTAS). Volume 2: Comparison and evaluation of results

    NASA Astrophysics Data System (ADS)

    1984-08-01

    CTAS compared and evaluated various advanced energy conversion systems that can use coal or coal-derived fuels for industrial cogeneration applications. The principal aim of the study was to provide information needed by DOE to establish research and development (R&D) funding priorities for advanced-technology systems that could significantly advance the use of coal or coal-derived fuels in industrial cogeneration. Steam turbines, diesel engines, open-cycle gas turbines, combined cycles, closed-cycle gas turbines, Stirling engines, phosphoric acid fuel cells, molten carbonate fuel cells, and thermionics were studied with technology advancements appropriate for the 1985-2000 time period. The various advanced systems were compared and evaluated for a wide diversity of representative industrial plants on the basis of fuel energy savings, annual energy cost savings, emissions savings, and rate of return on investment (ROI) as compared with purchasing electricity from a utility and providing process heat with an on-site boiler.

  12. Cogeneration feasibility study at the Paul Masson Vineyards Winery in Saratoga, California. Final report

    SciTech Connect

    Not Available

    1980-09-01

    This report evaluated the feasibility of installing a cogeneration system at the Paul Masson Vineyards Winery in Saratoga, California. The feasibility study explores the technical and economic features of a variety of cogeneration systems. The system recommended is a 290 kilowatt natural gas fired rich burning Otto cycle internal combustion engine-generator set. Waste heat recovery would produce an average of 1500 gallons per hour of 180F. process water and provide for a peak of 4500 gallons per hour for four hours per day. The system would produce 1,670,000 kilowatt-hours of electric energy per year, have a capital cost of $191,000, and have a payback period of 2.3 years. The project would save over 18 billion BTU's per year compared to separate generation of steam by Paul Masson and electricity by the utility. Atmospheric emissions can be sufficiently controlled by using a non-selective reduction catalytic converter.

  13. Development of advanced concepts for DIR-MCFC cogeneration applications in the European Market

    SciTech Connect

    Kortbeek, P.J.; Ottervanger, R.G.; Dicks, A.L.

    1996-12-31

    Early 1996 a three year (1996 - 1998) joint European project was launched under the name {open_quote}Advanced DIR-MCFC Development{close_quote}, aiming at the development of Direct Internal Reforming (DIR) Molten Carbonate Fuel Cell (MCFC) systems for cogeneration applications for the European market. In this project participate: Brandstofcel Nederland BV (BCN), British Gas pic (BG), Gaz de France (GDF), Netherlands Energy Research foundation (ECN), Stork, Royal Schelde and Sydkraft AB. The European Fuel Cell User Group (EFCUG) supports the project as an advisory board. Whereas the US and Japanese programmes are aimed at large-scale demonstrations of the MCFC technology, this project focusses on the development of concepts and technology, required for MCFC systems that will be competative on the cogeneration market. The project partners provide the essential expertise: from end-user, system engineering, stack development up to fundamental material research.

  14. Savings analysis of a 1 MW cogeneration system at a Texas mental health facility

    SciTech Connect

    Athar, A.; Turner, W.D.; Caton, J.A.; McClean, G.

    1995-12-31

    Cogeneration is defined as the generation of electric power and coincident recovery of useful thermal energy from a single prime mover using a single fuel. The 1 MW gas turbine cogeneration system at Texas Department of Mental Health and Mental Retardation (TDMHMR), Austin, came on line in March, 1992 and is a unique application of federal and state funds. This system has been analyzed for its present performance and loads using hourly measured data. The Energy Systems Laboratory (ESL) at Texas A and M University has been collecting hourly data for natural gas use and the electrical energy produced by the engine since August, 1992. Waste heat recovered by the Waste Heat Recovery Boiler (WHRB) is also monitored. This paper describes the present system, analyzes the system using hourly monitored data, calculates energy and dollar savings, compares the measured results with the estimated savings, and discusses some of the problems encountered during the first year of operation.

  15. Kakira Sugar Works (1985) Limited, Kakira biomass cogeneration: Volume 3 -- Final report. Export trade information

    SciTech Connect

    1998-06-01

    This report, conducted by John H. Payne, Inc., was funded by the US Trade and Development Agency. The study concerns the technical and financial feasibility of the Kakira Sugar Works Limited to increase its capacity to 5,000 TCD and to sell its surplus power to the Uganda Electricity Board. This is Volume 3, the Purchase Energy Contract between Kakira Cogeneration Company Limited and Uganda Electricity Board.

  16. Reconstruction of cogeneration plants equipped with LMZ R-50-130 steam turbines

    NASA Astrophysics Data System (ADS)

    Ermolaev, V. V.; Gudkov, N. N.; Shklyar, A. I.; Dudin, N. N.; Adamson, D. A.; Babiev, A. N.; Koshelev, S. A.; Solov'ev, A. K.; Miroshnichenko, S. A.

    2009-04-01

    The problems of how to use backpressure turbines underloaded for objective reasons at industrial cogeneration plants (CPs) are analyzed. The means of modernization of R-50-130 turbines implemented by the Teploenergoservis group of companies, which make it possible to meet the changed requirements for power and heat supply from a CP equipped with R-50-130 turbines and to increase productivity of CP fixed assets, are described.

  17. Study of fuel cell co-generation systems applied to a dairy industry

    NASA Astrophysics Data System (ADS)

    Leal, Elisângela M.; Silveira, José Luz

    This paper presents a methodology for the study of a molten carbonate fuel cell co-generation system. This system is applied to a dairy industry of medium size that typically demands 2100 kW of electricity, 8500 kg/h of saturated steam ( P=1.08 MPa) and 2725 kW of cold water production. Depending on the associated recuperation equipment, the co-generation system permits the recovery of waste heat, which can be used for the production of steam, hot and cold water, hot and cold air. In this study, a comparison is made between two configurations of fuel cell co-generation systems (FCCS). The plant performance has been evaluated on the basis of fuel utilisation efficiency and each system component evaluated on the basis of second law efficiency. The energy analysis presented shows a fuel utilisation efficiency of about 87% and exergy analysis shows that the irreversibilities in the combustion chamber of the plant are significant. Further, the payback period estimated for the fuel cell investment between US 1000 and US 1500/kW is about 3 and 6 years, respectively.

  18. Feasibility study: fuel cell cogeneration at the Anheuser-Busch Los Angeles brewery

    SciTech Connect

    Banister, R.M.; Corea, V.A.; Sorensen, J.C.; Duncan, J.M.; Rudawitz, L.; Verdes, R.

    1980-02-01

    The results of a feasibility study undertaken in support of the overall Department of Energy (DOE) goal to develop fuel cell power plants for industrial cogeneration are described. Use of a single 4.5 MW fuel cell power plant like that manufactured by United Technologies Corporation (UTC) and currently being constructed on the Consolidated Edison of New York System was examined. The technical feasibility of using such a plant in a cogeneration mode at the Anheuser-Busch, Los Angeles brewery was affirmed by the study. Break-even capital costs for UTC supplied equipment were calculated for various conditions. Based upon the assumption that UTC supplied equipment could be provided for the $350 to $400/kW projected for first generation fuel cells, the economic feasibility of fuel cell cogeneration was demonstrated for nearly all assumed conditions. The most economical case was found to be a municipal utility owned, base loaded power plant where economic credit is taken for reduced environmental emissions. Acceptable fuels were evaluated for their availability, and the fuels identified for use were natural gas with propane as a backup. Phosphoric acid is the selected electrolyte. The Demonstration Program Plan is described. (WHK)

  19. Energy and cost savings results for advanced technology systems from the Cogeneration Technology Alternatives Study /CTAS/

    NASA Technical Reports Server (NTRS)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    The Cogeneration Technology Alternatives Study (CTAS), a program undertaken to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the 1985-2000 time period, is described, and preliminary results are presented. Two cogeneration options are included in the analysis: a topping application, in which fuel is input to the energy conversion system which generates electricity and waste heat from the conversion system is used to provide heat to the process, and a bottoming application, in which fuel is burned to provide high temperature process heat and waste heat from the process is used as thermal input to the energy conversion system which generates energy. Steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics are examined. Expected plant level energy savings, annual energy cost savings, and other results of the economic analysis are given, and the sensitivity of these results to the assumptions concerning fuel prices, price of purchased electricity and the potential effects of regional energy use characteristics is discussed.

  20. Partners assume risks, lower finance costs of delayed coker-cogeneration project in Chile

    SciTech Connect

    Alveal, E.D.; Karpenski, M.J.

    1997-03-31

    Foster Wheeler Power Systems Inc., and its partners--Petrox SA Refineria de Petroleo and Empresa Nacional de Petroleo (ENAP), the Chilean national oil company--closed on the financing of Petropower Energia Limitada, a $237 million financed combination delayed coker-cogeneration facility. The facility is now under construction adjacent to Petrox`s 84,000 b/d Talcahuano refinery, near Concepcion. In addition to the low interest rate of 7.36%--only 170 basis points over the 10 year US Treasury yield--the project was rated investment-grade by Standard and Poor`s. The Petropower project also has the distinction of having the longest term--18 years--for any project financing in Latin America. The project is unique in other ways: it is the Republic of Chile`s first public/private partnership and also the first project to combine petroleum coking technology with cogeneration technology in a single project financing. The paper discusses risk assumption, the Petropower project, organization, delayed coker facility, hydrotreater unit, cogeneration facility, environmental assessment, Chile`s changing market, and project benefit.

  1. Acidogenic fermentation of food waste for volatile fatty acid production with co-generation of biohydrogen.

    PubMed

    Dahiya, Shikha; Sarkar, Omprakash; Swamy, Y V; Mohan, S Venkata

    2015-04-01

    Fermentation experiments were designed to elucidate the functional role of the redox microenvironment on volatile fatty acid (VFA, short chain carboxylic acid) production and co-generation of biohydrogen (H2). Higher VFA productivity was observed at pH 10 operation (6.3g/l) followed by pH 9, pH 6, pH 5, pH 7, pH 8 and pH 11 (3.5 g/l). High degree of acidification, good system buffering capacity along with co-generation of higher H2 production from food waste was also noticed at alkaline condition. Experiments illustrated the role of initial pH on carboxylic acids synthesis. Alkaline redox conditions assist solubilization of carbohydrates, protein and fats and also suppress the growth of methanogens. Among the carboxylic acids, acetate fraction was higher at alkaline condition than corresponding neutral or acidic operations. Integrated process of VFA production from waste with co-generation of H2 can be considered as a green and sustainable platform for value-addition.

  2. Cogeneration Technology Alternatives Study (CTAS) Volume 5: Analytical approach and results

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Data and information in the area of advanced energy conversion systems for industrial cogeneration applications in the 1985 to 2000 time period are provided. Six current and thirty-six advanced energy conversion systems were defined and combined with appropriate balance of plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on site furnaces and utility electricity. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal derived fuels, or coal with advanced fluid bed combustion or on site gasification systems.

  3. Long-Term Nuclear Industry Outlook - 2004

    SciTech Connect

    Reichmuth, Barbara A.; Wood, Thomas W.; Johnson, Wayne L.

    2004-09-30

    The nuclear industry has become increasingly efficient and global in nature, but may now be poised at a crossroads between graceful decline and profound growth as a viable provider of electrical energy. Predicted population and energy-demand growth, an increased interest in global climate change, the desire to reduce the international dependence on oil as an energy source, the potential for hydrogen co-generation using nuclear power reactors, and the improved performance in the nuclear power industry have raised the prospect of a “nuclear renaissance” in which nuclear power would play an increasingly more important role in both domestic and international energy market. This report provides an assessment of the role nuclear-generated power will plan in the global energy future and explores the impact of that role on export controls.

  4. Thermodynamic evaluation of the possibility to increase cogeneration turbine efficiency by using a heat pump operating with steam

    NASA Astrophysics Data System (ADS)

    Batenin, V. M.; Datsenko, V. V.; Zeigarnik, Yu. A.; Kosoi, A. S.; Sinkevich, M. V.

    2016-01-01

    Cogeneration turbines operate in different operation modes that considerably differ as to the working process conditions. In summer time, when heat demand is minimal, almost all steam flow passes through all turbine stages and enters into the condenser (condensing mode of operation). When heat supply is needed, the steam bleed-offs are used. The several last stages of the turbine (low-pressure part—LPP) have a control diaphragm at the inlet. When the heat supply is large, the diaphragm is maximally closed, and the entire steam flow, with an exception for a minimal ventilation flow is delivered to the steam bleed-offs (cogeneration mode). LPP flow path is designed for the optimal operation in the condensing mode. While running in cogeneration mode, the LPP operating conditions are far from optimal. Depending on the ventilation steam flow rate and outlet pressure, the LPP power can drop to zero or even become negative (ventilation mode). It is proposed to control an outlet steam pressure by using the heat pump that operates with steam. The heat pump energy consumption can be compensated and even exceeded by optimizing the steam expansion process in LPP. In this respect, operating conditions of cogeneration turbine LPPs during the cold season are analyzed. A brief description of a heat pump operating with steam is made. The possibility of increasing cogeneration turbine efficiency by using a steam heat pump is shown.

  5. Assessment of the Technical Potential for Micro-Cogeneration in Small Commerical Buildings across the United States: Preprint

    SciTech Connect

    Griffith, B.

    2008-05-01

    This paper presents an assessment of the technical potential for micro-cogeneration in small commercial buildings throughout the United States. The cogeneration devices are simulated with the computer program EnergyPlus using models developed by Annex 42, a working group of the International Energy Agency's Energy Efficiency in Buildings and Community Systems (IEA/ECBCS). Although the Annex 42 models were developed for residential applications, this study applies them to small commercial buildings, assumed to have a total floor area of 500 m2 or less. The potential for micro-cogeneration is examined for the entire existing stock of small U.S. commercial buildings using a bottom-up method based on 1,236 EnergyPlus models.

  6. Feasibility study of wood-fired cogeneration at a Wood Products Industrial Park, Belington, WV. Phase II

    SciTech Connect

    Vasenda, S.K.; Hassler, C.C.

    1992-06-01

    Customarily, electricity is generated in a utility power plant while thermal energy is generated in a heating/cooling plant; the electricity produced at the power plant is transmitted to the heating/cooling plant to power equipments. These two separate systems waste vast amounts of heat and result in individual efficiencies of about 35%. Cogeneration is the sequential production of power (electrical or mechanical) and thermal energy (process steam, hot/chilled water) from a single power source; the reject heat of one process issued as input into the subsequent process. Cogeneration increases the efficiency of these stand-alone systems by producing these two products sequentially at one location using a small additional amount of fuel, rendering the system efficiency greater than 70%. This report discusses cogeneration technologies as applied to wood fuel fired system.

  7. Development of small gas-turbine-based steam cogeneration system. Phase 1. Final report, July 1987-December 1988

    SciTech Connect

    Hagler, R.E.

    1989-01-01

    The increasing cost of electricity, the availability of low-cost natural gas and the promotion of cogeneration by the Federal Energy Regulatory Commission has increased the attractiveness of cogeneration as an alternate energy source. A study of the commercial/military/industrial segments indicates a viable market for the proposed system in hotels/motels, hospitals, nursing homes, shopping centers, district-heating plants, military bases, and light manufacturing. Design analysis indicates that a packaged cogeneration system utilizing the Teledyne Continental Motors TP500 gas-turbine engine, developed as a low-cost aircraft engine, when modified to include an industrial gearbox, exhaust recuperator with variable bypass and single can combustor with dual fuel capability can compete favorably in cost, durability and fuel consumption with current converted diesel engine powered systems with the advantage of producing 100 psig steam at variable rates.

  8. Advanced cogeneration and absorption chillers potential for service to Navy bases. Final report

    SciTech Connect

    Andrews, J.W.; Butcher, T.A.; Leigh, R.W.; McDonald, R.J.; Pierce, B.L.

    1996-04-01

    The US military uses millions of Btu`s of thermal energy to heat, cool and deliver process thermal energy to buildings on military bases, much of which is transmitted through a pipeline system incorporating thousands of miles of pipe. Much of this pipeline system is in disrepair and is nearing the end of its useful life, and the boilers which supply it are old and often inefficient. In 1993, Brookhaven National Laboratory (BNL) proposed to SERDP a three-year effort to develop advanced systems of coupled diesel cogenerators and absorption chillers which would be particularly useful in providing a continuation of the services now provided by increasingly antiquated district systems. In mid-February, 1995, BNL learned that all subsequent funding for our program had been canceled. BNL staff continued to develop the Program Plan and to adhere to the requirements of the Execution Plan, but began to look for ways in which the work could be made relevant to Navy and DoD energy needs even without the extensive development plan formerly envisioned. The entire program was therefore re-oriented to look for ways in which small scale cogeneration and absorption chilling technologies, available through procurement rather than development, could provide some solutions to the problem of deteriorated district heating systems. The result is, we believe, a striking new approach to the provision of building services on military bases: in many cases, serious study should be made of the possibility that the old district heating system should be removed or abandoned, and small-scale cogenerators and absorption chillers should be installed in each building. In the remainder of this Summary, we develop the rationale behind this concept and summarize our findings concerning the conditions under which this course of action would be advisable and the economic benefits which will accrue if it is followed. The details are developed in the succeeding sections of the report.

  9. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Fourth Quarter 1983

    SciTech Connect

    1983-01-01

    At the end of 1983, the number of signed contracts and letter agreements for cogeneration and small power production projects was 305, with a total estimated nominal capacity of 2,389 MW. Of these totals, 202 projects, capable of producing 566 MW, are operational (Table A). A map indicating the location of operational facilities under contract with PG and E is provided as Figure A. Developers of cogeneration, solid waste, or biomass projects had signed 101 contracts with a potential of 1,408 MW. In total, 106 contracts and letter agreements had been signed with projects capable of producing 1,479 MW. PG and E also had under active discussion 29 cogeneration projects that could generate a total of 402 MW to 444 MW, and 13 solid waste or biomass projects with a potential of 84 MW to 89 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. There were 7 solar projects with signed contracts and a potential of 37 MW, as well as 3 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 28, with a generating capability of 618 MW. Also, discussions were being conducted with 14 wind farm projects, totaling 365 MW. There were 100 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 8 other small wind projects under active discussion. There were 59 hydroelectric projects with signed contracts and a potential of 146 MW, as well as 72 projects under active discussion for 169 MW. In addition, there were 31 hydroelectric projects, with a nominal capacity of 185 MW, that PG and E was planning to construct. Table B displays the above information. In tabular form, in Appendix A, are status reports of the projects as of December 31, 1983.

  10. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission First Quarter 1984

    SciTech Connect

    1984-01-01

    At the end of the First Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 322, with a total estimated nominal capacity of 2,643 MW. Of these totals, 215 projects, capable of producing 640 MW, are operational. A map indicating the location of operational facilities under contract with PG and E is provided. Developers of cogeneration, solid waste, or biomass projects had signed 110 contracts with a potential of 1,467 MW. In total, 114 contracts and letter agreements had been signed with projects capable of producing 1,508 MW. PG and E also had under active discussion 35 cogeneration projects that could generate a total of 425 MW to 467 MW, and 11 solid waste or biomass projects with a potential of 94 MW to 114 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. There were 7 solar projects with signed contracts and a potential of 37 MW, as well as 5 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 32, with a generating capability of 848 MW. Also, discussions were being conducted with 18 wind farm projects, totaling 490 MW. There were 101 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 6 other small wind projects under active discussion. There were 64 hydroelectric projects with signed contracts and a potential of 148 MW, as well as 75 projects under active discussion for 316 MW. In addition, there were 31 hydroelectric projects, with a nominal capacity of 187 MW, that Pg and E was planning to construct.

  11. Final environmental impact statement, Coyote Springs Cogeneration Project, Morrow County, Oregon - appendices

    SciTech Connect

    Not Available

    1994-07-01

    Portland General Electric Company (PGE) has submitted an Application for Site Certification (ASC) to the Oregon Department of Energy for development of the Coyote Springs cogeneration power plant in the Port of Morrow, Oregon. This document includes the appendixes for the Environmental Impact Statement. Appendix topics include the following: A-Wildlife and vegetation surveys; B-EMF Supplement; C-Biological Assessment; D-Oregon DOE proposed order, in the matter of the Application for Site Certificate of Portland General Electric Company; E-Ecological Monitoring Program; F-Air contaminant Discharge permit; G-National Pollution Discharge Elimination System Storm Water Discharge Permit; H-Erosion and Sedimentation Control Plan.

  12. Cogeneration and beyond: The need and opportunity for high efficiency, renewable community energy systems

    SciTech Connect

    Gleason, T.C.J.

    1992-06-01

    The justification, strategies, and technology options for implementing advanced district heating and cooling systems in the United States are presented. The need for such systems is discussed in terms of global warming, ozone depletion, and the need for a sustainable energy policy. Strategies for implementation are presented in the context of the Public Utilities Regulatory Policies Act and proposed new institutional arrangements. Technology opportunities are highlighted in the areas of advanced block-scale cogeneration, CFC-free chiller technologies, and renewable sources of heating and cooling that are particularly applicable to district systems.

  13. Industrial cogeneration case study No. 2: American Cyanamid Chemical Company, Bound Brook, New Jersey

    SciTech Connect

    Not Available

    1980-01-01

    Within a project for evaluating the economics of cogeneration for industrial plants with an electrical capacity of 10,000 to 30,000 kW, the American Cyanamid plant at Bound Brook, NJ was selected for study. Built between 1915 and 1920 this power plant was converted in the 1960's from coal-fueling to oil and natural gas. Information is presented on the plant site, fuel usage, generation costs, comparative cost of purchasable electric power, equipment used, performance, and reliability and capital and maintenance costs. (LCL)

  14. 250 MW single train CFB cogeneration facility. Annual report, October 1993--September 1994

    SciTech Connect

    1995-02-01

    This Technical Progress Report (Draft) is submitted pursuant to the Terms and Conditions of Cooperative Agreement No. DE-FC21-90MC27403 between the Department of Energy (Morgantown Energy Technology Center) and York County Energy Partners, L.P. a wholly owned project company of Air Products and Chemicals, Inc. covering the period from January 1994 to the present for the York County Energy Partners CFB Cogeneration Project. The Technical Progress Report summarizes the work performed during the most recent year of the Cooperative Agreement including technical and scientific results.

  15. Borax spends $30M for cogeneration system. [US Borax and Chemical Corp

    SciTech Connect

    Barber, J.

    1982-09-20

    A $30 million natural-gas-fired turbine power plant will provide all the electricity and steam needed at the US Borax and Chemical Corp. plant in Los Angeles. The cogeneration facility will come on line in 1984, and will pay for itself in about five years. The plant will use only half the 46 megawatts produced, the 22 megawatt surplus being sold to Southern California Edison Co. on a 20-year contract at a price pegged to the utility's avoided costs. Natural gas consumption at the plant will remain about the same. (DCK)

  16. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission. Second Quarter 1984

    SciTech Connect

    1984-01-01

    At the end of the Second Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 334, with total estimated nominal capacity of 2,876 MW. Of these totals, 232 projects, capable of producing 678 MW, are operational (Table A). A map indicating the location of operational facilities under contract with PG and E is provided as Figure A. Developers of cogeneration projects had signed 80 contracts with a potential of 1,161 MW. Thirty-three contracts had been signed for solid waste/biomass projects for a total of 298 MW. In total, 118 contracts and letter agreements had been signed with cogeneration, solid waste, and biomass projects capable of producing 1,545 MW. PG and E also had under active discussion 46 cogeneration projects that could generate a total of 688 MW to 770 MW, and 13 solid waste or biomass projects with a potential of 119 MW to 139 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. Two geothermal projects were under active discussion for a total of 2 MW. There were 8 solar projects with signed contracts and a potential of 37 MW, as well as 4 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 34, with a generating capability of 1,042 MW, Also, discussions were being conducted with 23 wind farm projects, totaling 597 MW. There were 100 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 7 other small wind projects under active discussion. There were 71 hydroelectric projects with signed contracts and a potential of 151 MW, as well as 76 projects under active discussion for 505 MW. In addition, there were 18 hydroelectric projects, with a nominal capacity of 193 MW, that PG and E was planning to construct. Table B displays the above information. Appendix A displays in tabular form the status reports of the projects as of June 30, 1984.

  17. Vacuum evaporation treatment of digestate: full exploitation of cogeneration heat to process the whole digestate production.

    PubMed

    Guercini, S; Castelli, G; Rumor, C

    2014-01-01

    Vacuum evaporation represents an interesting and innovative solution for managing animal waste surpluses in areas with high livestock density. To reduce operational costs, a key factor is the availability of an inexpensive source of heat, such as that coming from an anaerobic digestion (AD) plant. The aim of this study was to test vacuum evaporation for the treatment of cattle slurry digestate focusing on heat exploitation. Tests were performed with a pilot plant fed with the digestate from a full-scale AD plant. The results were used to evaluate if and how cogeneration heat can support both the AD plant and the subsequent evaporation of the whole daily digestate production in a full-scale plant. The concentrate obtained (12% total solids) represents 40-50% of the influent. The heat requirement is 0.44 kWh/kg condensate. Heat power availability exceeding the needs of the digestor ranges from 325 (in winter) to 585 kW (in summer) versus the 382 kW required for processing the whole digestate production. To by-pass fluctuations, we propose to use the heat coming from the cogenerator directly in the evaporator, tempering the digestor with the latent heat of distillation vapor.

  18. Renewable Fuel Utilization in a Cogeneration Arrangement with Hydrate Storage Method

    NASA Astrophysics Data System (ADS)

    Naing, Soe; Yamada, Takanobu; Nakanishi, Kimio

    According to the third conference of parties (COP3), Japan has set a target of reducing greenhouse gas emissions by 6% by the year 2010. Many believe that the bulk utilization of fossil fuel influences to the damaging environmental effect. The objective of this paper is to propose an effective method for this goad which is possible to clarify a noticeable utilization of renewable fuel in a micro gas turbine cogeneration system in cold region. Moreover, analysis of renewable fuel, biogas production indicates that production amount becomes largest in hot season, while the total heat energy demand is lowest on during three years. Biogas storage is also adapted for the delay between peak energy supply and demand. Biogas hydrate formation is examined by resource from laboratory experiments and simulation of integration into an existing cogeneration arrangement. The proposed system can be successfully supported the use and reuse of renewable fuel for providing to substantial emission and clean development mechanism for reducing greenhouse gas emission.

  19. Performance and economic enhancement of cogeneration gas turbines through compressor inlet air cooling

    NASA Astrophysics Data System (ADS)

    Delucia, M.; Bronconi, R.; Carnevale, E.

    1994-04-01

    Gas turbine air cooling systems serve to raise performance to peak power levels during the hot months when high atmospheric temperatures cause reductions in net power output. This work describes the technical and economic advantages of providing a compressor inlet air cooling system to increase the gas turbine's power rating and reduce its heat rate. The pros and cons of state-of-the-art cooling technologies, i.e., absorption and compression refrigeration, with and without thermal energy storage, were examined in order to select the most suitable cooling solution. Heavy-duty gas turbine cogeneration systems with and without absorption units were modeled, as well as various industrial sectors, i.e., paper and pulp, pharmaceuticals, food processing, textiles, tanning, and building materials. The ambient temperature variations were modeled so the effects of climate could be accounted for in the simulation. The results validated the advantages of gas turbine cogeneration with absorption air cooling as compared to other systems without air cooling.

  20. Evaluation results and use of software tools for a cogeneration plant comparison

    SciTech Connect

    Stenzel, W.C.; Sopocy, D.M.; Roche, R.V.

    1998-07-01

    Today's concerns for the environment and the necessity to address the extremely competitive business situation demand that existing and new industrial plants are analyzed to optimize the supply of electricity, process steam and other forms of energy. This paper presents a review of four plant designs for steam and electricity supply. The plants are: 1. Rankine cycle--natural gas fired boiler, 2. Rankine cycle--petroleum coke fired circulating fluidized bed boiler (CFB) 3. Cogeneration cycle--natural gas fired combustion turbine, and 4. Combined cycle--natural gas fired combustion turbine. Petroleum coke, refereed to as pet coke or coke, is a refining waste product which can be used as a boiler fuel. It is usually high in carbon and sulfur content and typically indexed to and priced below coal. Plant operating performance and financial results are compared. Note these four designs are based on one set of project site, project and economic parameters and the results could vary significantly for another project with different parameters. The intent of this comparison is to illustrate calculation methodology and the use of cogeneration cycles, not to suggest a preference for fuels or technology.

  1. JV 38-APPLICATION OF COFIRING AND COGENERATION FOR SOUTH DAKOTA SOYBEAN PROCESSORS

    SciTech Connect

    Darren D. Schmidt

    2002-11-01

    Cogeneration of heat and electricity is being considered by the South Dakota Soybean Processors for its facility in Volga, South Dakota, and a new facility to be located in Brewster, Minnesota. The Energy & Environmental Research Center has completed a feasibility study, with 40% funding provided from the U.S. Department of Energy's Jointly Sponsored Research Program to determine the potential application of firing biomass fuels combined with coal and comparative economics of natural gas-fired turbines. Various biomass fuels are available at each location. The most promising options based on availability are as follows. The economic impact of firing 25% biomass with coal can increase return on investment by 0.5 to 1.5 years when compared to firing natural gas. The results of the comparative economics suggest that a fluidized-bed cogeneration system will have the best economic performance. Installation for the Brewster site is recommended based on natural gas prices not dropping below a $4.00/MMBtu annual average delivered cost. Installation at the Volga site is only recommended if natural gas prices substantially increase to $5.00/MMBtu on average. A 1- to 2-year time frame will be needed for permitting and equipment procurement.

  2. Performance investigation of a cogeneration plant with the efficient and compact heat recovery system

    NASA Astrophysics Data System (ADS)

    Myat, Aung; Thu, Kyaw; Kim, Young-Deuk; Choon, Ng Kim

    2012-06-01

    This paper presents the performance investigation of a cogeneration plant equipped with an efficient waste heat recovery system. The proposed cogeneration system produces four types of useful energy namely: (i) electricity, (ii) steam, (iii) cooling and (iv) dehumidification. The proposed plant comprises a Capstone C30 micro-turbine which generates 24 kW of electricity, a compact and efficient waste heat recovery system and a host of waste heat activated devices namely (i) a steam generator, (ii) an absorption chiller, (iii) an adsorption chiller and (iv) a multi-bed desiccant dehumidifier. The numerical analysis for the host of waste heat recovery system and thermally activated devices using FORTRAN power station linked to powerful IMSL library is performed to investigate the performance of the overall system. A set of experiments, both part load and full load, of micro-turbine is conducted to examine the electricity generation and the exhaust gas temperature. It is observed that energy utilization factor (EUF) could achieve as high as 70% while Fuel Energy Saving Ratio (FESR) is found to be 28%.

  3. Experience gained from operation of the reverse-osmosis plant at the Novosibirsk TETs-2 cogeneration station

    NASA Astrophysics Data System (ADS)

    Abramova, I. A.; Chernov, S. A.; Maikov, V. M.; Doineko, O. A.; Ustinov, B. V.; Vil'Ms, E. V.

    2008-05-01

    We present the main indicators characterizing the performance of the demineralizing plant comprising reverse-osmosis and ion-exchange equipment that produces makeup water for the boilers at the Novosibirsk TETs-2 cogeneration station for three years of plant operation.

  4. 18 CFR 381.505 - Certification of qualifying status as a small power production facility or cogeneration facility.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on... qualifying status as a small power production facility or cogeneration facility. 381.505 Section 381.505 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY...

  5. Development of a system for monitoring technical state of the equipment of a cogeneration steam turbine unit

    NASA Astrophysics Data System (ADS)

    Aronson, K. E.; Brodov, Yu. M.; Novoselov, V. B.

    2012-12-01

    Generalized results from the work on developing elements of a comprehensive system for monitoring technical state of the equipment of cogeneration turbines are presented. The parameters of the electrohydraulic turbine control system are considered together with a number of problems concerned with assessing the state of condensers and delivery water heaters.

  6. Economic effectiveness of using super-high values of initial steam parameters in cogeneration power units

    NASA Astrophysics Data System (ADS)

    Kasilov, V. F.; Zakharenkov, E. A.

    2014-09-01

    The present paper reports the results of numerical investigations into both thermodynamic and economic components of the effect of an increase in the initial steam parameters to super-high values for cogeneration power units. As an initial variant, the heat flow diagram of the turbine plant equipped with the T-250/300-23.5 TMZ steam turbine was adopted. In the course of investigations, the ranges of initial steam pressure p 0 = 23.5-30.0 MPa, steam temperature t 0 = 540-600°C, and steam pressure after single reheat p rh = 3.6-4.5 MPa were considered. In the calculations of the thermodynamic efficiency, the extent of the effect of an increase in steam parameters on the out and the electric efficiency of a power unit when a cogeneration steam turbine operates in condensing and heat-extraction modes were estimated. In the economic part of the calculations, indicators of the commercial efficiency of investments into appropriate projects and the levels of total investment and production costs were determined. The results of the calculations made it possible to estimate the optimum level of super-high values of the initial steam parameters for a cogeneration power unit equipped with the T-280/335-26.1 steam turbine. The best indicators of the commercial efficiency were achieved for the variant with the following parameters of live steam and steam in the reheater: p 0 = 26.1 MPa, p rh = 4.035 MPa, t 0/ t rh = 575/575°C. In this case, the following values were obtained: 42.56% gross efficiency, 40.94% net efficiency, 334 MW rated capacity in the condensing operation mode, and 279.1 MW in the heat-extraction mode at Q T = 1381.6 GJ/h (330 Gcal/h). The use of higher steam parameters would result in a significant increase in the cost of projects. It has been shown that the restoration of initial design values of both live steam temperature and its temperature after reheat t 0/ t rh = 565/560°C may be advisable at the upgrading of power units equipped with T-250

  7. Preliminary design studies on a nuclear seawater desalination system

    SciTech Connect

    Wibisono, A. F.; Jung, Y. H.; Choi, J.; Kim, H. S.; Lee, J. I.; Jeong, Y. H.; No, H. C.

    2012-07-01

    Seawater desalination is one of the most promising technologies to provide fresh water especially in the arid region. The most used technology in seawater desalination are thermal desalination (MSF and MED) and membrane desalination (RO). Some developments have been done in the area of coupling the desalination plant with a nuclear reactor to reduce the cost of energy required in thermal desalination. The coupling a nuclear reactor to a desalination plant can be done either by using the co-generation or by using dedicated heat from a nuclear system. The comparison of the co-generation nuclear reactor with desalination plant, dedicated nuclear heat system, and fossil fueled system will be discussed in this paper using economical assessment with IAEA DEEP software. A newly designed nuclear system dedicated for the seawater desalination will also be suggested by KAIST (Korea Advanced Inst. of Science and Technology) research team and described in detail within this paper. The suggested reactor system is using gas cooled type reactor and in this preliminary study the scope of design will be limited to comparison of two cases in different operating temperature ranges. (authors)

  8. Low cost Brayton engine for gas-fired cogeneration system, phase 1

    NASA Astrophysics Data System (ADS)

    Kesseli, James; Saunders, Roger

    1989-08-01

    The turbo generator portion of a 30 kW recuperated Brayton (gas turbine) cycle has been tested. The intended application for this assembly is for a 20 to 40 kWe cogeneration system. Electrical power is generated by a two shaft gas turbine which drives an induction generator through a single stage gearbox. To minimize capital costs required for production and its initial cost, this innovative engine concept utilizes turbocharger components for both the gasifier and power turbine sections. The design and successful test results achieved with the prototype unit are described. When state point measurements are adjusted for the eventual addition of the recuperator, a thermal to electric efficiency of 34 percent (30 percent at HHV) was attained.

  9. An overview of the value of parabolic dish solar thermal systems in industrial cogeneration applications

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The essential elements of the cogeneration system configuration to be captured were the displacement of thermal energy by collection and use of the Brayton exhaust stream, and the sale back to the utility of any electricity production in excess of on-site requirements. In contrast to simply dumping these energy flows, their use or sale obviously serves, by itself, to increase gross value of the solar thermal energy system. Net allowable cost of the parabolic dish modules may or may not be increased, however. A consideration is that the waste heat capture and delivery subsystems are not free. This study does not address the incremental cost of adding waste heat capture, transport, and conversion (to steam, if necessary). It does compute a value for the thermal energy thereby displaced. This value can serve as a first-round input to any detailed economic evaluation of waste heat recovery.

  10. Cogeneration system using digester gas for Macon-Bibb county water and sewerage authority

    SciTech Connect

    Priester, D.C.

    1984-05-01

    With rise in energy cost, there is renewed focus on alternate energy sources, and especially sources that previously were not feasible to utilize, but were readily available. One of these is methane gas generated in biomass conversion in wastewater treatment plant anaerobic digestion process. The gas generated has been historically wasted and only used where it has been convenient. Now it is economically feasible to engineer systems to make the best use of the gas. The combination of cogeneration and digester gas utilization is particularly attractive for medium to large wastewater treatment plants. This paper describes the system designed for the Poplar Street Water Pollution Control Plant of the Macon-Bibb County Water and Sewerage Authority. The system consists of gas collection, cleaning and drying systems, storage vessel, and a utilization system of gas turbine generators.

  11. 1170 MW/sub t/ HTGR steamer cogeneration plant: design and cost study

    SciTech Connect

    1980-08-01

    A conceptual design and cost study is presented for intermediate size high temperature gas-cooled reactor (HTGR) for industrial energy applications performed by United Engineers and Constructors Inc., (UE and C) and The General Atomic Company (GAC). The study is part of a program at ORNL and has the objective to provide support in the evaluation of the technical and economic feasibility of a single unit 1170 MW/sub t/ HTGR steam cycle cogeneration plant (referred to as the Steamer plant) for the production of industrial process energy. Inherent in the achievement of this objective, it was essential to perform a number of basic tasks such as the development of plant concept, capital cost estimate, project schedule and annual operation and maintenance (O and M) cost.

  12. 2-Amp TPV cogenerator using forced-air cooled gallium antimonide cells

    SciTech Connect

    Fraas, L.; Avery, J.; Ballantyne, R.; Custard, P.; Ferguson, L.; Xiang, H.H.; Keyes, J.; Mulligan, B.; Samaras, J.; Williams, D.

    1997-03-01

    We will describe a wall mounted TPV cogenerator for use as a battery trickle charger and 5,000 BTU/hr room heater on boats, in remote cabins, and in recreational vehicles. Propane is used to heat a proprietary matched emitter, and the emitter is surrounded by a photovoltaic conversion array consisting of 48 GaSb cells connected in series. Warm air generated by forced-air cooling of the array cooling fins is used for room heating, while combustion exhaust gases are vented to the outside. The generator will be demonstrated at the conference. Beta site test units are presently being assembled, and production units are expected to be available this fall. {copyright} {ital 1997 American Institute of Physics.}

  13. Efficient Co-Generation of Seventh-Harmonic Radiation in Cyclotron Autoresonance Acceleration

    SciTech Connect

    Wang, C.; Hirshfield, J.L.; Ganguly, A.K. |

    1996-10-01

    It is shown that the lowest TE{sub {ital s},{ital l}} mode in a cylindrical waveguide at frequency {ital s}{omega}, with group velocity nearly identical to group velocity for the TE{sub 11} mode at frequency {omega}, is that with {ital s}=7, {ital l}=2. This allows coherent radiation to be generated at the seventh harmonic during electron autoresonance acceleration. Conditions are found where such co-generation of 7th harmonic power at 20GHz is possible with overall efficiency greater than 80{percent}. This mechanism could make possible high efficiency cm-wavelength high power rf sources suitable for driving a future multi-TeV electron-position collider. {copyright} {ital 1996 The American Physical Society.}

  14. Thermoeconomic optimization of sensible heat thermal storage for cogenerated waste-to-energy recovery

    SciTech Connect

    Abdul-Razzak, H.A.; Porter, R.W.

    1995-10-01

    This paper investigates the feasibility of employing thermal storage for cogenerated waste-to-energy recovery such as using mass-burning water-wall incinerators and topping steam turbines. Sensible thermal storage is considered in rectangular cross-sectioned channels through which is passed unused process steam at 1,307 kPa/250 C (175 psig/482 F) during the storage period and feedwater at 1,307 kPa/102 C (175 psig/216 F) during the recovery period. In determining the optimum storage configuration, it is found that the economic feasibility is a function of mass and specific heat of the material and surface area of the channel as well as cost of material and fabrication. Economic considerations included typical cash flows of capital charges, energy revenues, operation and maintenance, and income taxes. Cast concrete is determined to be a potentially attractive storage medium.

  15. Kakira Sugar Works (1985) Limited, Kakira biomass cogeneration: Volume 2 -- Final report, attachments. Export trade information

    SciTech Connect

    1998-06-01

    This report, conducted by John H. Payne, Inc., was funded by the US Trade and Development Agency. The study concerns the technical and financial feasibility of the Kakira Sugar Works Limited to increase its capacity to 5,000 TCD and to sell its surplus power to the Uganda Electricity Board. This is Volume 2, the Attachments, and it includes the following: (1) Layout Drawings; (2) Factory Steam Balance; (3) Evaporator and Juice Heater Arrangements; (4) Historical Production Data and Assumptions for Study; (5) Model Production Schedule; (6) Weather Data; (7) Solids Balance and Steam/Vapor Requirements for Pan Floor Boiling; (8) Boiler Efficiency and Steam Production; (9) Turbo Machinery Water Rate Calculations; (10) List of US Equipment Suppliers; (11) Capital Cost Estimate-Cogeneration; and (12) Capital Cost Estimate -- Mill Expansion.

  16. Numerical Analysis on Air Ingress Behavior in GTHTR300-Cogeneration System

    NASA Astrophysics Data System (ADS)

    Takeda, Tetsuaki; Yan, Xing; Kunitomi, Kazuhiko

    The objective of this study is to clarify safety characteristics of a High Temperature Gas-Cooled Reactor (HTGR) for the pipe rupture accident. Japan Atomic Energy Agency (JAEA) has been developing the analytical code for the safety characteristics of the HTGR and carrying out design study of the gas turbine high temperature reactor of 300MWe nominal-capacity for hydrogen production, the GTHTR300C (Gas Turbine High Temperature Reactor 300 for Cogeneration). A numerical analysis of heat and mass transfer fluid flow with multi-component gas mixture has been performed to obtain the variation of the density of the gas mixture, and the onset time of natural circulation of air. From the results obtained in this analysis, it was found that the duration time of the air ingress by molecular diffusion would increase due to the existence of the recuperator in the GTHTR300C system.

  17. Thermionic-cogeneration-burner assessment study. Second quarterly technical progress report, January-March 1983

    SciTech Connect

    Not Available

    1983-01-01

    The performance analysis work continued with the completion of the programming of the mathematical model and with the start of a series of parametric analyses. Initial studies predict that approximately 25 to 30% of the heat contained in the flue gas can be passed through the thermionic converters (TEC) and then be converted at 12 to 15% efficiency into electrical power. This results in up to 17 kWe per 1 million Btu/h burner firing rate. This is a 4 to 10 percent energy saving over power produced at the utility. The thermal burner design and construction have been completed, as well as initial testing on the furnace and preheat systems. The following industries are still considered viable options for use of the thermionic cogeneration burner: chlor-alkali, alumina-aluminum, copper refining, steel and gray iron, industries using resistance heating, electrolytic industries and electrochemical industries. Information gathered on these industries is presented.

  18. CSP cogeneration of electricity and desalinated water at the Pentakomo field facility

    NASA Astrophysics Data System (ADS)

    Papanicolas, C. N.; Bonanos, A. M.; Georgiou, M. C.; Guillen, E.; Jarraud, N.; Marakkos, C.; Montenon, A.; Stiliaris, E.; Tsioli, E.; Tzamtzis, G.; Votyakov, E. V.

    2016-05-01

    The Cyprus Institute's Pentakomo Field Facility (PFF) is a major infrastructure for research, development and testing of technologies relating to concentrated solar power (CSP) and solar seawater desalination. It is located at the south coast of Cyprus near the sea and its environmental conditions are fully monitored. It provides a test facility specializing in the development of CSP systems suitable for island and coastal environments with particular emphasis on small units (<25 MWth) endowed with substantial storage, suitable for use in isolation or distributed in small power grids. The first major experiment to take place at the PFF concerns the development of a pilot/experimental facility for the co-generation of electricity and desalinated seawater from CSP. Specifically, the experimental plant consists of a heliostat-central receiver system for solar harvesting, thermal energy storage in molten salts followed by a Rankine cycle for electricity production and a multiple-effect distillation (MED) unit for desalination.

  19. Conceptual design of a solar cogeneration facility at Pioneer Mill Co. , Ltd

    SciTech Connect

    Not Available

    1981-04-01

    Results are reported of a conceptual design study of the retrofit of a solar central receiver system to an existing cogeneration facility at a Hawaii raw sugar factory. Background information on the site, the existing facility, and the project organization is given. Then the results are presented o the work to select the site specific configuration, including the working fluid, receiver concept, heliostat field site, and the determination of the solar facility size and of the role of thermal storage. The system selected would use water-steam as its working fluid in a twin-cavity receiver collecting sunlight from 41,420 m/sup 2/ of heliostat mirrors. The lates version of the system specification is appended, as are descriptions of work to measure site insolation and a site insolation mathematical model and interface data for the local utility. (LEW)

  20. Considerations for ground fault protection in medium-voltage industrial and cogeneration systems

    SciTech Connect

    Love, D.J.; Hashemi, N.

    1988-07-01

    Industrial plants utilize medium-voltage systems for in-plant distribution of purchased and cogenerated electrical energy. During the planning stage, system protection is generally specified, including the type of source neutral grounding and ground fault protection. Where medium-voltage systems have expanded, circuit-breaker interrupting ratings have also been increased. Accordingly, grounding consideration should be reviewed, particularly because charging and/or ground fault current values have also increased. The typical methods for grounding of medium-voltage neutral systems - high resistance, low resistance, and ungrounded, as well as methods used to detect the presence of a ground fault - are reviewed. Also, the effects of charging current and how the ground fault protection method could affect conductor ratings are analyzed.

  1. Cogenerator to quit Con Ed by selling kWh to neighbor

    SciTech Connect

    Springer, N.

    1986-02-10

    Selling 125 kilowatts of electricity around the clock to a nearby supermarket will make cogeneration feasible for the Flagship Restaurant in White Plains, NY, allowing it to drop off Consolidated Edison's grid and pay for a necessary backup generator, according to John Prayias, the restaurant's owner. The ambitious $536,000 project, which will be financed conventionally with a commercial bank loan, will eliminate the Flagship's $70,000 electricity costs and the $7240 spent of heating and domestic hot water, Prayias said. By selling the power to the supermarket at 9 cents per kilowatt hour - 3 cents less than Con Ed's rate of 12 cents per kWh - the restaurant will collect $120,000 a year in revenues - just about enough to cover the cost of diesel fuel for the 350-kW system and pay for monitoring and maintenance.

  2. Solar Cogeneration Facility: Cimarron River Station, Central Telephone and Utilities-Western Power

    NASA Astrophysics Data System (ADS)

    1981-08-01

    A site-specific conceptual design and evaluation of a solar central receiver system integrated with an existing cogeneration facility are described. The system generates electricity and delivers a portion of that electricity and process steam to a natural gas processing plant. Early in the project, tradeoff studies were performed to establish key system characteristics. As a result of these studies the use of energy storage was eliminated, the size of the solar facility was established at 37.13 MW (sub t), and other site-specific features were selected. The conceptual design addressed critical components and system interfaces. The result is a hybrid solar/fossil central receiver facility which utilizes a collector system of Department of Energy second generation heliostats.

  3. Advanced coal-fueled industrial cogeneration gas turbine system. Annual report, June 1990--June 1991

    SciTech Connect

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  4. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Third Quarter 1983

    SciTech Connect

    1983-01-01

    In the Third Quarter of 1983, the number of signed contracts and committed projects rose from 240 to 258, with a total estimated nominal capacity of these projects of 1,547 MW. Of this nominal capacity, about 416 MW is operational, and the balance is under contract for development. A map indicating the location of operational facilities under contract with PG and E is provided. Of the 258 signed contracts and committed projects, 83 were cogeneration, solid waste, or biomass projects with a potential of 779 MW. PG and E also had under active discussion 38 cogeneration projects that could generate a total of 797 MW to 848 MW, and 19 solid waste/biomass projects with a potential of 152 MW to 159 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as 3 solar projects under active discussion for 31 MW. Wind farm projects under contract number 21, with a generating capability of 528 MW. Also, discussions are being conducted with 17 wind farm projects, totaling 257 to 262 MW. There are 94 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 8 other small wind projects under active discussion. There are 50 hydroelectric projects with signed contracts and a potential of 112 MW, as well as 67 projects under active discussion for 175 MW. In addition, there are 31 hydroelectric projects, with a nominal capacity of 185 MW, that PG and E is planning to construct.

  5. York County Energy Partners CFB Cogeneration Project. Annual report, [September 30, 1992--September 30, 1993

    SciTech Connect

    Not Available

    1994-03-01

    The Department of Energy, under the Clean Coal Technology program, proposes to provide cost-shared financial assistance for the construction of a utility-scale circulating fluidized bed technology cogeneration facility by York County Energy Partners, L.P (YCEP). YCEP, a project company of ir Products and Chemicals, Inc., would design, construct and operate a 250 megawatt (gross) coal-fired cogeneration facility on a 38-acre parcel in North Codorus Township, York County, Pennsylvania. The facility would be located adjacent to the P. H. Glatfelter Company paper mill, the proposed steam host. Electricity would be delivered to Metropolitan Edison Company. The facility would demonstrate new technology designed to greatly increase energy efficiency and reduce air pollutant emissions over current generally available commercial technology which utilizes coal fuel. The facility would include a single train circulating fluidized bed boiler, a pollution control train consisting of limestone injection for reducing emissions of sulfur dioxide by greater than 92 percent, selective non-catalytic reduction for reducing emissions of nitrogen oxides, and a fabric filter (baghouse) for reducing emissions of particulates. Section II of this report provides a general description of the facility. Section III describes the site specifics associated with the facility when it was proposed to be located in West Manchester Township. After the Cooperative Agreement was signed, YCEP decided to move the proposed site to North Codorus Township. The reasons for the move and the site specifics of that site are detailed in Section IV. This section of the report also provides detailed descriptions of several key pieces of equipment. The circulating fluidized bed boiler (CFB), its design scale-up and testing is given particular emphasis.

  6. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Second Quarter 1983

    SciTech Connect

    1983-01-01

    In the Second Quarter of 1983, the number of signed contracts and committed projects rose from 223 to 240, with a total estimated nominal capacity of these projects of 1,449 MW. Of this nominal capacity, about 361 MW is operational, and the balance is under contract for development. A map indicating the location of currently operating facilities is provided as Figure A. Of the 240 signed contracts and committed projects, 75 were cogeneration, solid waste, or biomass projects with a potential of 740 MW. PG and E also had under active discussion 32 cogeneration projects that could generate a total of 858 MW to 921 MW, and 10 solid waste/biomass projects with a potential of 113 MW to 121 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as another solar project under active discussion for 30 MW. Wind farm projects under contract number 19, with a generating capability of 471 MW. Also, discussions are being conducted with 12 wind farm projects, totaling 273 to 278 MW. There are 89 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 10 other projects under active discussion. There are 47 hydroelectric projects with signed contracts and a potential of 110 MW, as well as 65 projects under active discussion for 175 MW. In addition, there are 30 hydroelectric projects, with a nominal capacity of 291 MW, that PG and E is constructing or planning to construct. Table A displays the above information. In tabular form, in Appendix A, are status reports of the projects as of June 30, 1983.

  7. Micro-Cogeneration Incl. The Conversion of Chemical Energy of Biomass to Electric Energy and the Low Potential Heat

    NASA Astrophysics Data System (ADS)

    Huzvar, Jozef; Kapjor, Andrej

    2011-06-01

    This article deals with combined production of heat and electricity for small premises, such as households, where energy consumption is around few kilowatts. This proposal of micro co-generation unit uses as a heat source an automatic burner for combustion of wood pellets. Construction of an equipment for the heat transport can be designed using different basic ways of heat transfer. Electricity is produced by the two-stroke steam engine and the generator.

  8. A major cogeneration system goes in at JFK International Airport. Low-visibility privatization in a high-impact environment

    SciTech Connect

    Leibler, J.; Luxton, R.; Ostberg, P.

    1998-04-01

    This article describes the first major privatization effort to be completed at John F. Kennedy International Airport. The airport owner and operator, the Port Authority of New York and New Jersey, decided to seek private sector involvement in a capital-intensive project to expand and upgrade the airport`s heating and air conditioning facilities and construct a new cogeneration plant. Kennedy International Airport Cogeneration (KIAC) Partners, a partnership between Gas Energy Incorporated of New York and Community Energy Alternatives of New Jersey, was selected to develop an energy center to supply electricity and hot and chilled water to meet the airport`s growing energy demand. Construction of a 110 MW cogeneration plant, 7,000 tons of chilled water equipment, and 30,000 feet of hot water delivery piping started immediately. JFK Airport`s critical international position called for this substantial project to be developed almost invisibly; no interruption in heating and air conditioning service and no interference in the airport`s active operations could be tolerated. Commercial operation was achieved in February 1995.

  9. Design, parametrization, and pole placement of stabilizing output feedback compensators via injective cogenerator quotient signal modules.

    PubMed

    Blumthaler, Ingrid; Oberst, Ulrich

    2012-03-01

    Control design belongs to the most important and difficult tasks of control engineering and has therefore been treated by many prominent researchers and in many textbooks, the systems being generally described by their transfer matrices or by Rosenbrock equations and more recently also as behaviors. Our approach to controller design uses, in addition to the ideas of our predecessors on coprime factorizations of transfer matrices and on the parametrization of stabilizing compensators, a new mathematical technique which enables simpler design and also new theorems in spite of the many outstanding results of the literature: (1) We use an injective cogenerator signal module ℱ over the polynomial algebra [Formula: see text] (F an infinite field), a saturated multiplicatively closed set T of stable polynomials and its quotient ring [Formula: see text] of stable rational functions. This enables the simultaneous treatment of continuous and discrete systems and of all notions of stability, called T-stability. We investigate stabilizing control design by output feedback of input/output (IO) behaviors and study the full feedback IO behavior, especially its autonomous part and not only its transfer matrix. (2) The new technique is characterized by the permanent application of the injective cogenerator quotient signal module [Formula: see text] and of quotient behaviors [Formula: see text] of [Formula: see text]-behaviors B. (3) For the control tasks of tracking, disturbance rejection, model matching, and decoupling and not necessarily proper plants we derive necessary and sufficient conditions for the existence of proper stabilizing compensators with proper and stable closed loop behaviors, parametrize all such compensators as IO behaviors and not only their transfer matrices and give new algorithms for their construction. Moreover we solve the problem of pole placement or spectral assignability for the complete feedback behavior. The properness of the full feedback behavior

  10. Design, parametrization, and pole placement of stabilizing output feedback compensators via injective cogenerator quotient signal modules.

    PubMed

    Blumthaler, Ingrid; Oberst, Ulrich

    2012-03-01

    Control design belongs to the most important and difficult tasks of control engineering and has therefore been treated by many prominent researchers and in many textbooks, the systems being generally described by their transfer matrices or by Rosenbrock equations and more recently also as behaviors. Our approach to controller design uses, in addition to the ideas of our predecessors on coprime factorizations of transfer matrices and on the parametrization of stabilizing compensators, a new mathematical technique which enables simpler design and also new theorems in spite of the many outstanding results of the literature: (1) We use an injective cogenerator signal module ℱ over the polynomial algebra [Formula: see text] (F an infinite field), a saturated multiplicatively closed set T of stable polynomials and its quotient ring [Formula: see text] of stable rational functions. This enables the simultaneous treatment of continuous and discrete systems and of all notions of stability, called T-stability. We investigate stabilizing control design by output feedback of input/output (IO) behaviors and study the full feedback IO behavior, especially its autonomous part and not only its transfer matrix. (2) The new technique is characterized by the permanent application of the injective cogenerator quotient signal module [Formula: see text] and of quotient behaviors [Formula: see text] of [Formula: see text]-behaviors B. (3) For the control tasks of tracking, disturbance rejection, model matching, and decoupling and not necessarily proper plants we derive necessary and sufficient conditions for the existence of proper stabilizing compensators with proper and stable closed loop behaviors, parametrize all such compensators as IO behaviors and not only their transfer matrices and give new algorithms for their construction. Moreover we solve the problem of pole placement or spectral assignability for the complete feedback behavior. The properness of the full feedback behavior

  11. Efficient, Low Cost Dish Concentrator for a CPV Based Cogeneration System

    NASA Astrophysics Data System (ADS)

    Chayet, Haim; Kost, Ori; Moran, Rani; Lozovsky, Ilan

    2011-12-01

    Zenith Solar Ltd has developed efficient electricity and heat co-generation system based on segmented-parabolic dish of total aperture area of 11 m2 and water cooled dense array module combined of triple junction cells. Conventional parabolic dishes are inherently inefficient in the sense that the radiant flux distribution is non uniform causing inefficient generation by the PV array. Secondary optics improves uniformity but introduces additional complexity and losses to the system. Zenith's dish is assembled of 1200 flat mirrors of approximately 100 cm2 each. Every mirror facet has a unique shape such that the geometrical projection from each mirror on the focal plane is essentially the same. When perfectly aligned, the projected radiation from all mirrors overlaps uniformly on the PV surface. The low cost construction of the dish utilizes plastic mount supported by a precise metal frame. The precision of the metal frame affects the overall optical efficiency of the mirror and hence the efficiency of the system. State of the art dish of 11 m2 active aperture results in output of 2.25 kWp (900 W/m2) electrical and 5 kWp thermal power from one dish system representing 21% electrical and 50% thermal conversion efficiency adding to 71% overall system efficiency.

  12. Materials performance in the atmospheric fluidized-bed cogeneration air heater experiment

    SciTech Connect

    Natesan, K.; Podolski, W.; Wang, D.Y.; Teats, F.G. ); Gerritsen, W.; Stewart, A.; Robinson, K. )

    1991-02-01

    The Atmospheric Fluidized-Bed Cogeneration Air Heater Experiment (ACAHE) sponsored by the US Department of Energy (DOE) was initiated to assess the performance of various heat-exchanger materials to be used in fluidized-bed combustion air heater systems. Westinghouse Electric Corporation, through subcontracts with Babcock Wilcox, Foster Wheeler, and ABB Combustion Engineering Systems, prepared specifications and hardware for the ACAHE tests. Argonne National Laboratory contracted with Rockwell International to conduct tests in the DOE atmospheric fluidized-bed combustion facility. This report presents an overview of the project, a description of the facility and the test hardware, the test operating conditions, a summary of the operation, and the results of analyzing specimens from several uncooled and cooled probes exposed in the facility. Extensive microstructural analyses of the base alloys, claddings, coatings, and weldments were performed on specimens exposed in several probes for different lengths of time. Alloy penetration data were determined for several of the materials as a function of specimen orientation and the exposure location in the combustor. Finally, the data were compared with earlier laboratory test data, and the long-term performance of candidate materials for air-heater applications was assessed.

  13. Feasibility study: fuel cell cogeneration in a water pollution control facility. Final report

    SciTech Connect

    Not Available

    1980-02-01

    A conceptual design study was conducted to investigate the technical and economic feasibility of a cogeneration fuel cell power plant operating in a large water pollution control facility. In this particular application, the fuel cell power plant would use methane-rich digester gas from the water pollution control facility as a fuel feedstock to provide electrical and thermal energy. Several design configurations were evaluated. These configurations were comprised of combinations of options for locating the fuel cell power plant at the site, electrically connecting it with the water pollution control facility, using the rejected power plant heat, supplying fuel to the power plant, and for ownership and operation. A configuration was selected which met institutional/regulatory constraints and provided a net cost savings to the industry and the electric utility. The displacement of oil and coal resulting from the Bergen County Utilities Authority application was determined. A demonstration program based on the selected configuration was prepared to describe the scope of work, organization, schedules, and costs from preliminary design through actual tests and operation. The potential market for nationwide application of the concept was projected, along with the equivalent oil displacement resulting from estimated commercial application.

  14. A desiccant/steam-injected gas-turbine industrial cogeneration system

    SciTech Connect

    Jody, B.J.; Daniels, E.J.; Karvelas, D.E.; Teotia, A.P.S.

    1993-01-01

    An integrated desiccant/steam-injected gas-turbine system was evaluated as an industrial cogenerator for the production of electricity and dry, heated air for product drying applications. The desiccant can be regenerated using the heated, compressed air leaving the compressor. The wet stream leaves the regenerator at a lower temperature than when it entered the desiccant regenerator, but with little loss of energy. The wet stream returns to the combustion chamber of the gas-turbine system after preheating by exchanging heat with the turbine exhaust strewn. Therefore, the desiccant is regenerated virtually energy-free. In the proposed system, the moisture-laden air exiting the desiccant is introduced into the combustion chamber of the gas-turbine power system. This paper discusses various possible design configurations, the impact of increased moisture content on the combustion process, the pressure drop across the desiccant regenerator, and the impact of these factors on the overall performance of the integrated system. A preliminary economic analysis including estimated potential energy savings when the system is used in several drying applications, and equipment and operating costs are also presented.

  15. A desiccant/steam-injected gas-turbine industrial cogeneration system

    SciTech Connect

    Jody, B.J.; Daniels, E.J.; Karvelas, D.E.; Teotia, A.P.S.

    1993-12-31

    An integrated desiccant/steam-injected gas-turbine system was evaluated as an industrial cogenerator for the production of electricity and dry, heated air for product drying applications. The desiccant can be regenerated using the heated, compressed air leaving the compressor. The wet stream leaves the regenerator at a lower temperature than when it entered the desiccant regenerator, but with little loss of energy. The wet stream returns to the combustion chamber of the gas-turbine system after preheating by exchanging heat with the turbine exhaust strewn. Therefore, the desiccant is regenerated virtually energy-free. In the proposed system, the moisture-laden air exiting the desiccant is introduced into the combustion chamber of the gas-turbine power system. This paper discusses various possible design configurations, the impact of increased moisture content on the combustion process, the pressure drop across the desiccant regenerator, and the impact of these factors on the overall performance of the integrated system. A preliminary economic analysis including estimated potential energy savings when the system is used in several drying applications, and equipment and operating costs are also presented.

  16. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Energy conversion system characteristics

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Six current and thirty-six advanced energy conversion systems were defined and combined with appropriate balance of plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a frame work for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Fuel energy savings of 10 to 25 percent were predicted compared to traditional on site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal derived fuels, or coal with advanced fluid bed combustion or on site gasifications. Data and information for both current and advanced energy conversion technology are presented. Schematic and physical descriptions, performance data, equipment cost estimates, and predicted emissions are included. Technical developments which are needed to achieve commercialization in the 1985-2000 period are identified.

  17. Thermoeconomic analysis of cogenerated refuse energy-recovery plant with thermal storage

    SciTech Connect

    Abdul-Razzak, H.A.J.

    1988-01-01

    This thesis develops thermoeconomic (second law and present worth) analysis and investigates the feasibility of employing thermal storage for cogenerated refuse energy recovery using mass-burning waterwall incinerators and topping steam turbines. A typical design is envisioned to be modular in nature so that it may be applied to various size loads without major engineering modifications. Each module is rated at 150 tpd of refuse capacity, 750 kW of electrical power, and 26,200 lbm/hr (11,900 kg/hr) of 150 psig (1140 kPa absolute) steam. Sensible thermal storage is considered in rectangular cross-sectional channels through which is passed unused process steam during the storage period and feedwater during the recovery period. In determining the optimum storage configuration, it is found that the economic feasibility is a function of mass and specific heat of the material and surface area of the channel as well as cost of material and fabrication. Economic considerations included typical cash flows of capital charges, steam and electrical energy revenues, refuse tipping fee, operation and maintenance costs, and income taxes. Cast concrete is determined to be a potentially attractive storage medium.

  18. Plasma-Chemical Hybrid NOx Reduction System for Commercial Cogeneration Boiler

    NASA Astrophysics Data System (ADS)

    Kuroki, Tomoyuki; Fujishima, Hidekatsu; Okubo, Masaaki

    Operation tests of the smoke-tube boiler emission NOx treatment plant which consists of a plasma ozonizer using a pressure swing adsorption (PSA) oxygen generator and silent discharge for indirect NO oxidation and a Na2SO3 chemical scrubber are carried out for cogeneration boilers which uses a city gas and heavy oil as a fuel based on our proposed plasma-chemical hybrid NOx reduction principle. It is clear that amount of NO removed is almost same as the amount of corresponding O3 concentration to oxidize NO regardless of fuels and flow rates of flue gas. After the relation between oxidation-reduction potential (ORP) and the NOx removal efficiency is obtained, continuous operation tests of this plant are performed. For gas firing boiler emission, the NO complete removal and the decrease in NOx from 32 ppm to 3 ppm are achieved for 300 min by keeping -30 mV of ORP. For the treatment of heavy oil boiler emission, the decrease in NOx from 90 ppm to less than 25 ppm is maintained for 250 min. It is demonstrated that the high NOx removal performance can be maintained for a long time by keeping the optimum value of ORP.

  19. Feasibility study: fuel cell cogeneration in a water pollution control facility. Final report

    SciTech Connect

    Not Available

    1980-02-01

    A conceptual design study was conducted to investigate the technical and economic feasibility of a cogeneration fuel cell power plant operating in a large water pollution control facility. The fuel cell power plant would use methane-rich digester gas from the water pollution control facility as a fuel feedstock to provide electrical and thermal energy. Several design configurations were evaluated. These configurations were comprised of combinations of options for locating the fuel cell power plant at the site, electrically connecting it with the water pollution control facility, using the rejected power plant heat, supplying fuel to the power plant, and for ownership and operation. A configuration was selected which met institutional/regulatory constraints and provided a net cost savings to the industry and the electric utility. This volume of the report contains the appendices: (A) abbreviations and definitions, glossary; (B) 4.5 MWe utility demonstrator power plant study information; (C) rejected heat utilization; (D) availability; (E) conceptual design specifications; (F) details of the economic analysis; (G) detailed description of the selected configuration; and (H) fuel cell power plant penetration analysis. (WHK)

  20. Design and development of a thermoelectric cogeneration device integrated in autonomous gas heaters

    NASA Astrophysics Data System (ADS)

    Codecasa, Matteo P.; Fanciulli, Carlo; Gaddi, Roberto; Passaretti, Francesca

    2012-06-01

    An autonomous heat-radiating gas heater for commercial outdoor environments has been selected as a test case for implementing cogeneration in autonomous gas heaters and stoves, permitting its installation and operation without the need of a connection to the electrical network. A thermoelectric generator (TEG) was selected for this purpose[1], designed for converting an amount of the produced heat into electrical power for auxiliary (ventilation, battery recharge) or ancillary functions (high efficiency LED illumination). The design approach, the layout and structure of the TEG are discussed, as well as the constraints for its integration in the existing gas heater. Design features and main components are examined: hot side heat collector for capturing heat from the flame; thermoelectric module (TEGM) technology and model selection; natural convection heat radiator at cold side; analysis and optimization of the thermal chain; TEG's assembly and its design as a whole. A prototype has been built and tested, its functional behavior has been modeled through multi-physics numerical simulation[2] to allow for further optimization and extrapolation of the results towards larger and/or more complex designs. A patent application has been issued jointly by the authors, covering the design hereinafter described.

  1. Highly Selective Oxidation of Carbohydrates in an Efficient Electrochemical Energy Converter: Cogenerating Organic Electrosynthesis.

    PubMed

    Holade, Yaovi; Servat, Karine; Napporn, Teko W; Morais, Cláudia; Berjeaud, Jean-Marc; Kokoh, Kouakou B

    2016-02-01

    The selective electrochemical conversion of highly functionalized organic molecules into electricity, heat, and added-value chemicals for fine chemistry requires the development of highly selective, durable, and low-cost catalysts. Here, we propose an approach to make catalysts that can convert carbohydrates into chemicals selectively and produce electrical power and recoverable heat. A 100% Faradaic yield was achieved for the selective oxidation of the anomeric carbon of glucose and its related carbohydrates (C1-position) without any function protection. Furthermore, the direct glucose fuel cell (DGFC) enables an open-circuit voltage of 1.1 V in 0.5 m NaOH to be reached, a record. The optimized DGFC delivers an outstanding output power Pmax =2 mW cm(-2) with the selective conversion of 0.3 m glucose, which is of great interest for cogeneration. The purified reaction product will serve as a raw material in various industries, which thereby reduces the cost of the whole sustainable process. PMID:26777210

  2. A 400-kWe high-efficiency steam turbine for industrial cogeneration

    NASA Technical Reports Server (NTRS)

    Leibowitz, H. M.

    1982-01-01

    An advanced state-of-the-art steam turbine-generator developed to serve as the power conversion subsystem for the Department of Energy's Sandia National Laboratories' Solar Total-Energy Project (STEP) is described. The turbine-generator, which is designed to provide 400-kW of net electrical power, represents the largest turbine-generator built specifically for commercial solar-powered cogeneration. The controls for the turbine-generator incorporate a multiple, partial-arc entry to provide efficient off-design performance, as well as an extraction control scheme to permit extraction flow regulation while maintaining 110-spsig pressure. Normal turbine operation is achieved while synchronized to a local utility and in a stand-alone mode. In both cases, the turbine-generator features automatic load control as well as remote start-up and shutdown capability. Tests totaling 200 hours were conducted to confirm the integrity of the turbine's mechanical structure and control function. Performance tests resulted in a measured inlet throttle flow of 8,450 pounds per hour, which was near design conditions.

  3. Materials performance in the atmospheric fluidized-bed cogeneration air heater experiment

    SciTech Connect

    Natesan, K.; Podolski, W.; Wang, D.Y.; Teats, F.G.; Gerritsen, W.; Stewart, A.; Robinson, K.

    1991-02-01

    The Atmospheric Fluidized-Bed Cogeneration Air Heater Experiment (ACAHE) sponsored by the US Department of Energy (DOE) was initiated to assess the performance of various heat-exchanger materials to be used in fluidized-bed combustion air heater systems. Westinghouse Electric Corporation, through subcontracts with Babcock & Wilcox, Foster Wheeler, and ABB Combustion Engineering Systems, prepared specifications and hardware for the ACAHE tests. Argonne National Laboratory contracted with Rockwell International to conduct tests in the DOE atmospheric fluidized-bed combustion facility. This report presents an overview of the project, a description of the facility and the test hardware, the test operating conditions, a summary of the operation, and the results of analyzing specimens from several uncooled and cooled probes exposed in the facility. Extensive microstructural analyses of the base alloys, claddings, coatings, and weldments were performed on specimens exposed in several probes for different lengths of time. Alloy penetration data were determined for several of the materials as a function of specimen orientation and the exposure location in the combustor. Finally, the data were compared with earlier laboratory test data, and the long-term performance of candidate materials for air-heater applications was assessed.

  4. EARLY ENTRANCE CO-PRODUCTION PLANT - DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    Unknown

    2003-01-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors Texaco Power & Gasification (now ChevronTexaco), SASOL Technology Ltd., and Nexant Inc. entered into a Cooperative Agreement DE-FC26-00NT40693 with the U. S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) to assess the technoeconomic viability of building an Early Entrance Co-Production Plant (EECP) in the United States to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases. Phase I is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase II is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase III updates the original EECP design based on results from Phase II, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report covers the period performance from July 1, 2002 through September 30, 2002.

  5. EARLY ENTRANCE CO-PRODUCTION PLANT - DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    Unknown

    2002-06-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors entered into a Cooperative Agreement with the USDOE, National Energy Technology Laboratory (NETL) to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the US to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases. Phase 1 is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase II is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase III updates the original EECP design based on results from Phase II, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report is WMPI's fourth quarterly technical progress report. It covers the period performance from January 1, 2002 through March 31, 2002.

  6. Highly Selective Oxidation of Carbohydrates in an Efficient Electrochemical Energy Converter: Cogenerating Organic Electrosynthesis.

    PubMed

    Holade, Yaovi; Servat, Karine; Napporn, Teko W; Morais, Cláudia; Berjeaud, Jean-Marc; Kokoh, Kouakou B

    2016-02-01

    The selective electrochemical conversion of highly functionalized organic molecules into electricity, heat, and added-value chemicals for fine chemistry requires the development of highly selective, durable, and low-cost catalysts. Here, we propose an approach to make catalysts that can convert carbohydrates into chemicals selectively and produce electrical power and recoverable heat. A 100% Faradaic yield was achieved for the selective oxidation of the anomeric carbon of glucose and its related carbohydrates (C1-position) without any function protection. Furthermore, the direct glucose fuel cell (DGFC) enables an open-circuit voltage of 1.1 V in 0.5 m NaOH to be reached, a record. The optimized DGFC delivers an outstanding output power Pmax =2 mW cm(-2) with the selective conversion of 0.3 m glucose, which is of great interest for cogeneration. The purified reaction product will serve as a raw material in various industries, which thereby reduces the cost of the whole sustainable process.

  7. EARLY ENTRANCE CO-PRODUCTION PLANT - DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    Unknown

    2001-12-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors Texaco Power & Gasification, SASOL Technology Ltd., and Nexant Inc. entered into a Cooperative Agreement DE-FC26-00NT40693 with the US Department of Energy (DOE), National Energy Technology Laboratory (NETL) to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the US to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP designs emphasize on recovery and gasification of low-cost coal waste (culm) from coal clean operations and will assess blends of the culm and coal or petroleum coke as feedstocks. The project is being carried out in three phases. Phase I involves definition of concept and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase II consists of an experimental testing program designed to validate the coal waste mixture gasification performance. Phase III involves updating the original EECP design, based on results from Phase II, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 BPD coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania.

  8. Advanced coal-fueled industrial cogeneration gas turbine system: Hot End Simulation Rig

    SciTech Connect

    Galica, M.A.

    1994-02-01

    This Hot End Simulation Rig (HESR) was an integral part of the overall Solar/METC program chartered to prove the technical, economic, an environmental feasibility of a coal-fueled gas turbine, for cogeneration applications. The program was to culminate in a test of a Solar Centaur Type H engine system operated on coal slurry fuel throughput the engine design operating range. This particular activity was designed to verify the performance of the Centaur Type H engine hot section materials in a coal-fired environment varying the amounts of alkali, ash, and sulfur in the coal to assess the material corrosion. Success in the program was dependent upon the satisfactory resolution of several key issues. Included was the control of hot end corrosion and erosion, necessary to ensure adequate operating life. The Hot End Simulation Rig addressed this important issue by exposing currently used hot section turbine alloys, alternate alloys, and commercially available advanced protective coating systems to a representative coal-fueled environment at turbine inlet temperatures typical of Solar`s Centaur Type H. Turbine hot end components which would experience material degradation include the transition duct from the combustor outlet to the turbine inlet, the shroud, nozzles, and blades. A ceramic candle filter vessel was included in the system as the particulate removal device for the HESR. In addition to turbine material testing, the candle material was exposed and evaluated. Long-term testing was intended to sufficiently characterize the performance of these materials for the turbine.

  9. Multi-user cogeneration systems, natural-gas-fueled group heating and cooling systems: current status, prospects, and research and development needs. Final report

    SciTech Connect

    Marciniak, T.J.

    1986-05-01

    Natural-gas-fueled group heating and cooling (GHC) systems combined with cogeneration offer an economical alternative to large-scale district heating and cooling systems by (a) lowering capital costs, (b) reducing construction time and (c) increasing thermal efficiency. The GHC concept offers an opportunity to expand the market for natural-gas-fueled packaged cogeneration systems through reductions in installation and operating costs. The report presents a review of the current status, future prospects, and research and development needs of the GHC concept. Also included are technical and economic reviews of district heating and cooling (DHC) applications and packaged cogeneration systems (PCS). Particular emphasis is given to the relationship of DHC and PCS technology to the GHC concept. The GHC/cogeneration concept is suitable for apartment complexes, office and light industrial parks, college campuses, medical facilities, urban redevelopment areas, and the business districts of small cities. Indications are that the installed cost of a new GHC/cogeneration system could be reduced by as much as $600/kW(e) compared to a one-unit PCS installation.

  10. A technical analysis for cogeneration systems with potential applications in twelve California industrial plants. [energy saving heat-electricity utility systems

    NASA Technical Reports Server (NTRS)

    Moretti, V. C.; Davis, H. S.; Slonski, M. L.

    1978-01-01

    In a study sponsored by the State of California Energy Resources Conservation and Development Commission, 12 industrial plants in five utility districts were surveyed to assess the potential applications of the cogeneration of heat and electricity in California industry. Thermodynamic calculations were made for each plant in determining the energy required to meet the existing electrical and steam demands. The present systems were then compared to conceptual cogeneration systems specified for each plant. Overall energy savings were determined for the cogeneration applications. Steam and gas turbine topping cycle systems were considered as well as bottoming cycle systems. Types of industries studied were: pulp and paper, timber, cement, petroleum refining, enhanced oil recovery, foods processing, steel and glass

  11. Terrestrial central station array life-cycle analysis support study

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Plant elements evaluated included designs for module, panel and array structures, as well as balance-of-plant systems. Installation and maintenance procedures and the impact of site environment were also evaluated. In terms of the cost of energy produced, the horizontal array configuration was found to be less expensive than the tandem array at latitudes less than 40 deg. Both of these configurations are less expensive than the rack design. However, the costs of energy for all three configurations are within approximately ?10 percent of each other. For flat plate panels, the seasonally adjusted and tracking array configurations are not economically attractive when compared to the three other designs. Balance-of-plant costs are approximately equal to (goal) module costs. The array structures and foundations are the most expensive items in the balance-of-plant costs.

  12. Is central station generation becoming a white elephant

    SciTech Connect

    Ferguson, J.S.

    1985-03-21

    Cost increases encourage the development of alternative sources of energy, and some of the alternatives currently under development lend themselves to moving the generation location back to load centers. In addition, some alternative sources have short lead times and minimal environmental impact, and are being subsidized through income tax policy. Alternative sources of energy have the potential for beginning to affect the usefulness of electric-generating plants and their high-voltage transmission networks before the end of this century. If this comes about, the electric utility industry may find its position similar to that of the telephone industry - with obsolete facilities not fully depreciated. The scenario discussed here would not come about all at once and may not come about at all. But it is the authors opinion that the chances are greater than fifty-fifty that it or something similar will affect the usefulness of bulk power supply systems sometime during the lifetime of generating units installed during the past ten years.

  13. Performance diagnostics software for gas turbines in pipeline and cogeneration applications. Final report, July 1985-September 1989

    SciTech Connect

    Levine, P.

    1989-12-01

    The development experience for the PEGASYS and COGENT software is presented. The PEGASYS software is applicable to two-shaft gas turbines in simple, regenerative and combined cycle systems. The COGENT software is applicable to cogeneration systems. The test results show that the software is able to define the deviations between measured and expected power and thermal efficiency. Further, the software is able to identify the components causing the performance losses. The results show that axial compressor fouling is a major cause of performance losses and that the performance can be recovered by washing. A description of an on-line version of PEGASYS is described.

  14. Analysis of an industrial cogeneration unit driven by a gas engine. Part 2: Exergy and thermoeconomic analysis

    SciTech Connect

    De Lucia, M.; Lanfranchi, C.

    1994-12-31

    The second-law performance of an industrial cogeneration unit driven by a gas engine was analyzed, using the test results described in a previous paper. This analysis was needed to identify each system loss and to quantify its effect on overall system efficiency. Exergy analysis was the first step in a complete thermoeconomic assessment of plant performance, aimed at evaluating in what way and to what extent part-load operating conditions influence both the global cost and the share allocated to each component.

  15. 3M: Hutchinson Plant Focuses on Heat Recovery and Cogeneration during Plan-Wide Energy-Efficiency Assessment

    SciTech Connect

    2003-06-01

    3M performed a plant-wide energy efficiency assessment at its Hutchinson, Minnesota, plant to identify energy- and cost-saving opportunities. Assessment staff developed four separate implementation packages that represented various combinations of energy-efficiency projects involving chiller consolidation, air compressor cooling improvements, a steam turbine used for cogeneration, and a heat recovery boiler for two of the plant's thermal oxidizers. Staff estimated that the plant could save 6 million kWh/yr in electricity and more than 200,000 MMBtu/yr in natural gas and fuel oil, and avoid energy costs of more than $1 million during the first year.

  16. Modern technologies for rendering information support to cogeneration steam turbine units in their design and operation stages

    NASA Astrophysics Data System (ADS)

    Brezgin, V. I.; Brodov, Yu. M.; Chubarov, A. A.; Brezgin, D. V.

    2013-08-01

    Application of modern information technologies in different stages of the lifecycle of cogeneration turbines is considered as one of possible ways for improving their competitiveness. Specific features relating to rendering information support for steam turbine units during the periods of their design and operation, which are the main stages of their life cycle, are presented. Three-dimension modeling, adaptive, and parametric design technologies are applied in the equipment design stages. Information support technologies developed by the authors are applied during the operation stage. Information is integrated by using a product lifecycle management (PLM) system.

  17. Novel solar cogeneration trough system based on stretched microstructured mylar film

    NASA Astrophysics Data System (ADS)

    Hejmadi, Vic; Shin, Meimei; Kress, Bernard; Giliberto, Alfredo

    2011-05-01

    Hybrid CSP / CPV (Concentrating Solar Power / Concentration Photovoltaic) systems provide a good alternative to traditional CPV systems or CSP trough architectures. Such systems are often described as solar cogeneration systems. Trough systems use mainly the IR portion of the spectrum in order to heat up a pipe in which water is circulating. CPV systems use only the visible portion of the spectrum to produce the photo-voltaic conversion. Due to the achromatic nature of traditional thermal trough CSP systems, it is very unlikely that a CPV system can be integrated with a CSP system, even a low concentration CPV system (LCPV). We propose a novel technique to implement a low concentration CSP/LCPV system which relies on commercially available solar trough concentrators / trackers that use reflective stretched Mylar membranes. However, here the Mylar is embossed with microstructures that act only on the visible portion of the spectrum, leaving the infrared part of the solar spectrum unperturbed. This architecture has many advantages, such as: the existing Mylar-based thermal trough architecture is left unperturbed for optimal thermal conversion, with linear strips of PV cells located a few inches away from the central water pipe; the infrared radiation is focused on the central pipe, away from the PV cells, which remain relatively cool compared to conventional LCPV designs (only visible light (the PV convertible part of the solar spectrum) is diffracted onto the PV cell strips); and the Mylar sheets can be embossed by conventional roll-to-roll processes, with a one-dimensional symmetric micro-structured pattern. We show how the positive master elements are designed and fabricated over a small area (using traditional IC wafer fabrication techniques), and how the Mylar sheets are embossed by a recombined negative nickel shim. We also show that such a system can efficiently filter the visible spectrum and divert it onto the linear strips of PV cells, while leaving the

  18. Development of a cogenerating thermophotovoltaic powered combination hot water heater/hydronic boiler

    NASA Astrophysics Data System (ADS)

    Kushch, Aleksandr S.; Skinner, Steven M.; Brennan, Richard; Sarmiento, Pedro A.

    1997-03-01

    A cogenerating thermophotovoltaic (TPV) device for hot water, hydronic space heating, and electric power generation was developed, designed, fabricated, and tested under a Department of Energy contracted program. The device utilizes a cylindrical ytterbia superemissive ceramic fiber burner (SCFB) and is designed for a nominal capacity of 80 kBtu/hr. The burner is fired with premixed natural gas and air. Narrow band emission from the SCFB is converted to electricity by single crystal silicon (Si) photovoltaic (PV) arrays arranged concentrically around the burner. A three-way mixing valve is used to direct heated water to either the portable water storage tank, radiant baseboard heaters, or both. As part of this program, QGI developed a microprocessor-based control system to address the safety issues, as well as photovoltaic power management. Flame sensing is accomplished via the photovoltaics, a technology borrowed from QGI's Quantum Control™ safety shut-off system. Device testing demonstrated a nominal photovoltaic power output of 200 W. Power consumed during steady state operation was 33 W, with power drawn from the combustion air blower, hydronic system pump, three-way switching valve, and the control system, resulting in a net power surplus of 142 W. Power drawn during the ignition sequence was 55 W, and a battery recharge time of 1 minute 30 seconds was recorded. System efficiency was measured and found to be more than 83%. Pollutant emissions at determined operating conditions were below the South Coast Air Quality Management District's (California) limit of 40 ng/J for NOx, and carbon monoxide emissions were measured at less than 50 dppm.

  19. Thermodynamic optimization of a solar system for cogeneration of water heating/purification and absorption cooling

    NASA Astrophysics Data System (ADS)

    Hovsapian, Zohrob O.

    This dissertation presents a contribution to understanding the behavior of solar powered air conditioning and refrigeration systems with a view to determining the manner in which refrigeration rate; mass flows, heat transfer areas, and internal architecture are related. A cogeneration system consisting of a solar concentrator, a cavity-type receiver, a gas burner, and a thermal storage reservoir is devised to simultaneously produce water heating/purification and cooling (absorption refrigerator system). A simplified mathematical model, which combines fundamental and empirical correlations, and principles of classical thermodynamics, mass and heat transfer, is developed. An experimental setup was built to adjust and validate the numerical results obtained with the mathematical model. The proposed model is then utilized to simulate numerically the system transient and steady state response under different operating and design conditions. A system global optimization for maximum performance (or minimum exergy destruction) in the search for minimum pull-down and pull-up times, and maximum system second law efficiency is performed with low computational time. Appropriate dimensionless groups are identified and the results presented in normalized charts for general application. The numerical results show that the three way maximized system second law efficiency, etaII,max,max,max, occurs when three system characteristic mass flow rates are optimally selected in general terms as dimensionless heat capacity rates, i.e., (Psisps , Psiwxwx, PsiHs)opt ≅ (1.43, 0.17, 0.19). The minimum pull-down and pull-up times, and maximum second law efficiencies found with respect to the optimized operating parameters are sharp and, therefore important to be considered in actual design. As a result, the model is expected to be a useful tool for simulation, design, and optimization of solar energy systems in the context of distributed power generation.

  20. EARLY ENTRANCE CO-PRODUCTION PLANT - DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    Unknown

    2001-07-01

    Waste Processors Management Inc. (WMPI), along with its subcontractors entered into a cooperative agreement with the USDOE to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the US that produces ultra clean Fischer-Tropsch transportation fuels with either power or steam as the major co-product. The EECP will emphasize on reclaiming and gasifying low-cost coal waste and/or its mixture as the primary feedstocks. The project consists of three phases. Phase I objectives include conceptual development, technical assessment, feasibility design and economic evaluation of a Greenfield commercial co-production plant and a site specific demonstration EECP to be located adjacent to the existing WMPI Gilberton Power Station. There is very little foreseen design differences between the Greenfield commercial coproduction plant versus the EECP plant other than: The greenfield commercial plant will be a stand alone FT/power co-production plant, potentially larger in capacity to take full advantage of economy of scale, and to be located in either western Pennsylvania, West Virginia or Ohio, using bituminous coal waste (gob) and Pennsylvania No.8 coal or other comparable coal as the feedstock; The EECP plant, on the other hand, will be a nominal 5000 bpd plant, fully integrated into the Gilbertson Power Company's Cogeneration Plant to take advantage of the existing infrastructure to reduce cost and minimize project risk. The Gilberton EECP plant will be designed to use eastern Pennsylvania anthracite coal waste and/or its mixture as feedstock.

  1. Membrane separation of CO{sub 2} and H{sub 2}S from biogas for industrial cogeneration purposes

    SciTech Connect

    Calabro, L.A.; Friedman, A.A.; Stern, S.A.; Krishnakumar, B.

    1996-11-01

    Membrane separation processes are being used on an increasingly larger scale for a wide variety of gas mixtures. The objective of this study was to assess the feasibility and economics of a new membrane separation process for upgrading the CH{sub 4} content of biogas produced by anaerobic processes in industrial wastewater treatment plants. The upgraded biogas can be utilized for the cogeneration of electricity and heat, which could result in substantial savings in plant operation costs. This paper reports preliminary results of laboratory and pilot plant studies on the separation of CO{sub 2} and H{sub 2}S from mixtures with CH{sub 4} by means of polymer membranes in the form of hollow fibers. Both synthetic CH{sub 4}/CO{sub 2} and CH{sub 4}/CO{sub 2}H{sub 2}S mixtures and biogas produced in a municipal wastewater treatment plant were used in a range of elevated pressures selected to determine optimum operating conditions. These data were used to develop economic assessments of cogeneration systems fueled with biogas upgraded by membrane systems.

  2. Rising critical emission of air pollutants from renewable biomass based cogeneration from the sugar industry in India

    NASA Astrophysics Data System (ADS)

    Sahu, S. K.; Ohara, T.; Beig, G.; Kurokawa, J.; Nagashima, T.

    2015-09-01

    In the recent past, the emerging India economy is highly dependent on conventional as well as renewable energy to deal with energy security. Keeping the potential of biomass and its plentiful availability, the Indian government has been encouraging various industrial sectors to generate their own energy from it. The Indian sugar industry has adopted and made impressive growth in bagasse (a renewable biomass, i.e. left after sugercane is crushed) based cogeneration power to fulfil their energy need, as well as to export a big chunk of energy to grid power. Like fossil fuel, bagasse combustion also generates various critical pollutants. This article provides the first ever estimation, current status and overview of magnitude of air pollutant emissions from rapidly growing bagasse based cogeneration technology in Indian sugar mills. The estimated emission from the world’s second largest sugar industry in India for particulate matter, NOX, SO2, CO and CO2 is estimated to be 444 ± 225 Gg yr-1, 188 ± 95 Gg yr-1, 43 ± 22 Gg yr-1, 463 ± 240 Gg yr-1 and 47.4 ± 9 Tg yr-1, respectively in 2014. The studies also analyze and identify potential hot spot regions across the country and explore the possible further potential growth for this sector. This first ever estimation not only improves the existing national emission inventory, but is also useful in chemical transport modeling studies, as well as for policy makers.

  3. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Third Quarter - September 1982

    SciTech Connect

    1982-09-01

    In the Third Quarter of 1982, the number of signed contracts and committed projects rose from 148 to 173, with a total estimated nominal capacity of these projects of 922 MW. Of this nominal capacity, about 168 MW is operational, and the balance is under contract for development. Of the 173 signed contracts and committed projects, 61 were cogeneration and solid waste projects with a potential of 643 MW. PG and E also had under active discussion 28 cogeneration projects that could generate a total of 968 MW to 1,049 MW, and 10 solid waste projects with a potential of 90 MW to 95 MW. Wind projects under contract number 84, with a generating capability of 85 MW. Also, discussions are being conducted with 17 wind projects, totaling 83 MW. There are 23 hydroelectric projects with signed contracts and a potential of 95 MW, as well as 63 projects under active discussion for 169 MW. In addition, there are 25 hydroelectric projects, with a nominal capacity of 278 MW, that PG and E is constructing or planning to construct. Five contracts have been signed with projects, using other types of electric power generation, capable of producing 100 MW.

  4. Thermal-economic analysis of organic Rankine combined cycle cogeneration. ITT Energy management report TR-82-3

    SciTech Connect

    Porter, R.W.

    1982-12-01

    This study presents an evaluation of Organic Rankine Cycles (ORC) as combined with topping cycles incorporating gas turbines or diesel engines, and with subsequent waste heat utilization. The potential benefit of the proposed organic-Rankine-combined-cycle cogeneration of useful heat and electricity is more flexibility in meeting demands for the two products, by varying the mode of operation of the system. A thermal-economic analysis is developed and illustrated with cost and performance data for commercially available equipment, and with general economic parameters reflecting current regulations and market conditions. The performance of the ORC and of the entire combined cycle is described. Equations are presented for evaluating the various thermodynamic and economic parameters, and the resultant cash flows. Criteria are developed in order to assess whether or not the addition of an ORC to a cogeneration system without ORC is viable based on rate of return on incremental investment. Examples are given to illustrate how the method may be applied, namely to serve proposed commercial energy facilities for the North Loop Project and for Illinois Center, in Chicago. While results indicate that the proposed system is potentially viable, it is not viable under conditions prevailing in Chicago for the selected case studies.

  5. Demonstration of an on-site PAFC cogeneration system with waste heat utilization by a new gas absorption chiller

    SciTech Connect

    Urata, Tatsuo

    1996-12-31

    Analysis and cost reduction of fuel cells is being promoted to achieve commercial on-site phosphoric acid fuel cells (on-site FC). However, for such cells to be effectively utilized, a cogeneration system designed to use the heat generated must be developed at low cost. Room heating and hot-water supply are the most simple and efficient uses of the waste heat of fuel cells. However, due to the short room-heating period of about 4 months in most areas in Japan, the sites having demand for waste heat of fuel cells throughout the year will be limited to hotels and hospitals Tokyo Gas has therefore been developing an on-site FC and the technology to utilize tile waste heat of fuel cells for room cooling by means of an absorption refrigerator. The paper describes the results of fuel cell cogeneration tests conducted on a double effect gas absorption chiller heater with auxiliary waste heat recovery (WGAR) that Tokyo Gas developed in its Energy Technology Research Laboratory.

  6. Numerical study of an internal-reforming solid oxide fuel cell and adsorption chiller co-generation system

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Leong, K. C.

    A study is conducted on a cogeneration system that incorporates a natural gas fed internal-reforming solid oxide fuel cell (IRSOFC) and a zeolite/water adsorption chiller (AC). The main aim is to investigate the performance of this combined system under different operating conditions and design parameters. A mathematical model is developed to simulate the combined system under steady-state conditions. The effects of fuel flow rate, fuel utilization factor, circulation ratio, mass of adsorbent and inlet air temperature on the performance are considered. The results show that the proposed IRSOFC-AC cogeneration system can achieve a total efficiency (combined electrical power and cooling power) of more than 77%. The electrical efficiency is found to decrease as the fuel flow rate increases, while the cooling power increases to a constant value. The total efficiency reaches a maximum value with variation of the fuel utilization factor. Both the circulation ratio and the inlet air temperature exert positive impacts on system efficiency.

  7. Local government guide to the emerging technologies of cogeneration and photovoltaics. Energy technology report of the energy task force of the urban consortium

    SciTech Connect

    1980-01-01

    An overview of cogeneration and photovoltaics systems is presented to provide local government managers a basic understanding of the technologies. Issues and considerations associated with applications are presented. Discussions cover installation and maintenance requirements, equipment availability, costs, and risks/benefits. Data describing demonstration sites and contacts for further information are provided. (MCW)

  8. An Evaluation Study of the Reduction Effects of the CO2 Emission Quantity and the Primary Energy in the Residential PEFC Co-generation System

    NASA Astrophysics Data System (ADS)

    Maeda, Kazushige; Yonemori, Hideto; Yasaka, Yasuyoshi

    This paper deals with the introduction effects on the basis of the comparative study of residential PEFC (polymer electrolyte fuel cell) co-generation systems and conventional systems that consist of a conventional gas boiler or a condensing gas boiler or a CO2 heat pump and the thermal power plant, by using the computer simulation. The target systems for estimation conform to real systems in the market and the energy demand data acquired from the past field tests was applied. As a result, it becomes clear that the residential PEFC co-generation systems have high performance in the energy saving and the CO2 reduction, from a comparison study with conventional systems and CO2 heat pump system. Concretely to say, the average energy saving rate that the residential PEFC co-generation system provides is 13.9% and the average CO2 reduction rate is 16.5% using quantity of reduction of CO2 as estimate function. Otherwise, the average energy saving rate that the CO2 heat pump system provides is 13.7% and the average CO2 reduction rate is 10.0%. Furthermore, we have proved the effectiveness a radiator in the residential PEFC co-generation system.

  9. Review of the cost estimate and schedule for the 2240-MWt high-temperature gas-cooled reactor steam-cycle/cogeneration lead plant

    SciTech Connect

    Not Available

    1983-09-01

    This report documents Bechtel's review of the cost estimate and schedule for the 2240 MWt High Temperature Gas-Cooled Reactor Steam Cycle/Cogeneration (HTGR-SC/C) Lead Plant. The overall objective of the review is to verify that the 1982 update of the cost estimate and schedule for the Lead Plant are reasonable and consistent with current power plant experience.

  10. Compact cogenerators could do for the power industry what desktop computers did for the computer industry. But, several obstacles must be overcome before that happens

    SciTech Connect

    Not Available

    1993-09-01

    This article examines the current technology and market for cogeneration systems between 5kWe and 30kWe. The topics of the article include types of prime mover, fuel cells, conventional packages, cost and size comparisons, installation and maintenance, the utilities interconnect and restrictions, regulations, and residential units.

  11. EARLY ENTRANCE CO-PRODUCTION PLANT - DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    John W. Rich

    2003-12-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors Texaco Power & Gasification (now ChevronTexaco), SASOL Technology Ltd., and Nexant Inc. entered into a Cooperative Agreement DE-FC26-00NT40693 with the U. S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the United States to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases. Phase I is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase II is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase III updates the original EECP design based on results from Phase II, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report covers the period performance from July 1, 2003 through September 30, 2003. The DOE/WMPI Cooperative Agreement was modified on May 2003 to expand the project team to include Shell Global Solutions, U.S. and Uhde GmbH as the engineering contractor. The addition of Shell and Uhde strengthen both the technical capability and financing ability of the project. Uhde, as the prime EPC contractor, has the responsibility to develop a LSTK (lump sum turnkey) engineering design package for the EECP leading to the eventual detailed engineering, construction and operation of the proposed concept. Major technical activities during the reporting

  12. Nuclear Medicine

    MedlinePlus

    ... Parents/Teachers Resource Links for Students Glossary Nuclear Medicine What is nuclear medicine? What are radioactive tracers? ... funded researchers advancing nuclear medicine? What is nuclear medicine? Nuclear medicine is a medical specialty that uses ...

  13. High performance steam development. Final report, Phase No. 3: 1500{degree}F steam plant for industrial cogeneration prototype development tests

    SciTech Connect

    Duffy, T.; Schneider, P.

    1996-01-01

    As a key part of DOE`s and industry`s R&D efforts to improve the efficiency, cost, and emissions of power generation, a prototype High Performance Steam System (HPSS) has been designed, built, and demonstrated. The world`s highest temperature ASME Section I coded power plant successfully completed over 100 hours of development tests at 1500{degrees}F and 1500 psig on a 56,000 pound per hour steam generator, control valve and topping turbine at an output power of 5500 hp. This development advances the HPSS to 400{degrees}F higher steam temperature than the current best technology being installed around the world. Higher cycle temperatures produce higher conversion efficiencies and since steam is used to produce the large majority of the world`s power, the authors expect HPSS developments will have a major impact on electric power production and cogeneration in the twenty-first century. Coal fueled steam plants now produce the majority of the United States electric power. Cogeneration and reduced costs and availability of natural gas have now made gas turbines using Heat Recovery Steam Generators (HRSG`s) and combined cycles for cogeneration and power generation the lowest cost producer of electric power in the United States. These gas fueled combined cycles also have major benefits in reducing emissions while reducing the cost of electricity. Development of HPSS technology can significantly improve the efficiency of cogeneration, steam plants, and combined cycles. Figure 2 is a TS diagram that shows the HPSS has twice the energy available from each pound of steam when expanding from 1500{degrees}F and 1500 psia to 165 psia (150 psig, a common cogeneration process steam pressure). This report describes the prototype component and system design, and results of the 100-hour laboratory tests. The next phase of the program consists of building up the steam turbine into a generator set, and installing the power plant at an industrial site for extended operation.

  14. CO2 emission free co-generation of energy and ethylene in hydrocarbon SOFC reactors with a dehydrogenation anode.

    PubMed

    Fu, Xian-Zhu; Lin, Jie-Yuan; Xu, Shihong; Luo, Jing-Li; Chuang, Karl T; Sanger, Alan R; Krzywicki, Andrzej

    2011-11-21

    A dehydrogenation anode is reported for hydrocarbon proton conducting solid oxide fuel cells (SOFCs). A Cu-Cr(2)O(3) nanocomposite is obtained from CuCrO(2) nanoparticles as an inexpensive, efficient, carbon deposition and sintering tolerant anode catalyst. A SOFC reactor is fabricated using a Cu-Cr(2)O(3) composite as a dehydrogenation anode and a doped barium cerate as a proton conducting electrolyte. The protonic membrane SOFC reactor can selectively convert ethane to valuable ethylene, and electricity is simultaneously generated in the electrochemical oxidative dehydrogenation process. While there are no CO(2) emissions, traces of CO are present in the anode exhaust when the SOFC reactor is operated at over 700 °C. A mechanism is proposed for ethane electro-catalytic dehydrogenation over the Cu-Cr(2)O(3) catalyst. The SOFC reactor also has good stability for co-generation of electricity and ethylene at 700 °C. PMID:21984357

  15. Evaluation of Energy Saving Characteristics of a High-Efficient Cogeneration System Utilizing Gas Engine Exhaust Heat

    NASA Astrophysics Data System (ADS)

    Pak, Pyong Sik

    A high efficiency cogeneration system (CGS) utilizing high temperature exhaust gas from a gas engine is proposed. In the proposed CGS, saturated steam produced in the gas engine is superheated with a super heater utilizing regenerative burner and used to drive a steam turbine generator. The heat energy is supplied by extracting steam from the steam turbine and turbine outlet low-temperature steam. Both of the energy saving characteristics of the proposed CGS and a CGS constructed by using the original gas engine (GE-CGS) were investigated and compared, by taking a case where energy for office buildings was supplied by the conventional energy systems. It was shown that the proposed CGS has energy saving rate of 24.5%, higher than 1.83 times, compared with that of the original GE-CGS.

  16. Methodology for the optimal design of an integrated first and second generation ethanol production plant combined with power cogeneration.

    PubMed

    Bechara, Rami; Gomez, Adrien; Saint-Antonin, Valérie; Schweitzer, Jean-Marc; Maréchal, François

    2016-08-01

    The application of methodologies for the optimal design of integrated processes has seen increased interest in literature. This article builds on previous works and applies a systematic methodology to an integrated first and second generation ethanol production plant with power cogeneration. The methodology breaks into process simulation, heat integration, thermo-economic evaluation, exergy efficiency vs. capital costs, multi-variable, evolutionary optimization, and process selection via profitability maximization. Optimization generated Pareto solutions with exergy efficiency ranging between 39.2% and 44.4% and capital costs from 210M$ to 390M$. The Net Present Value was positive for only two scenarios and for low efficiency, low hydrolysis points. The minimum cellulosic ethanol selling price was sought to obtain a maximum NPV of zero for high efficiency, high hydrolysis alternatives. The obtained optimal configuration presented maximum exergy efficiency, hydrolyzed bagasse fraction, capital costs and ethanol production rate, and minimum cooling water consumption and power production rate. PMID:27160954

  17. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission First Quarter - March 1983

    SciTech Connect

    1983-03-01

    In the First Quarter of 1983, the number of signed contracts and committed projects rose from 204 to 224, with a total estimated nominal capacity of these projects of 1,246 MW. Of this nominal capacity, about 259 MW is operational, and the balance is under contract for development. Of the 224 signed contracts and committed projects, 70 were cogeneration and solid waste/biomass projects with a potential of 687 MW. PG and E also had under active discussion 30 cogeneration projects that could generate a total of 744 MW to 821 MW, and 12 solid waste/biomass projects with a potential of 118 MW to 126 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as another solar project under active discussion for 30 MW. Wind farm projects under contract number 17, with a generating capability of 330 MW. Also, discussions are being conducted with 9 wind farm projects, totaling 184 to 189 MW. There are 89 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 9 other projects under active discussion. There are 38 hydroelectric projects with signed contracts and a potential of 103 MW, as well as 65 projects under active discussion for 183 MW. In addition, there are 29 hydroelectric projects, with a nominal capacity of 291 MW, that PG and E is constructing or planning to construct. Table A displays the above information. In tabular form, in Appendix A, are status reports of the projects as of March 31, 1983.

  18. Correcting the thermal inefficiencies of a cogeneration and boiler plant by low-pressure steam conversions and hot water thermal energy storage

    SciTech Connect

    Pals, C.M.

    1998-12-31

    A liberal arts college in Los Angeles was plagued by inefficient use of low-pressure (LP) steam produced by its two 150 kWe cogeneration units. Poor integration of the LP cogen system into the college`s existing high-pressure (HP) steam boiler plant led to under-utilization of cogenerated steam during the non-space-heating season. Six years of inefficient operation was estimated to have cost the college $750,000 in lost utility and maintenance savings. To improve steam-plant operations, the college`s facilities management staff implemented a plan to convert HP steam loads to LP, replace HP steam boilers with LP equipment, and improve the use of cogenerated steam through the installation of a hot water thermal energy storage (TES) system. A study was commissioned that identified the plant`s peak winter steam requirements and the typical steam profile for the non-space-heating season. Data from this work helped draw two conclusions: (1) converting HP steam loads to LP would boost demand for cogenerated steam, and (2) a hot water thermal energy storage (TES) system could further utilize a portion of remaining excess cogen steam for the manufacture and storage of the kitchen`s domestic water for use during peak steam demand periods. Combined, these two measures were estimated to improve utilization of cogenerated LP steam by 11,000 pounds (5,000 kg) per day and reduce boiler fuel consumption by 40,000 therms (4,220,000 MJ) each season. In addition to this work, a major plant renovation project was completed, which included the replacement of a 60-year-old, 280 bhp (2,747 kW) HP steam boiler, with two new LP boilers. Conversion to LP and the start-up of the hot water TES was completed in May 1997. During the first year of operation, after the improvement, boiler gas savings exceeded 52,000 therms (5,486,000 MJ). Maintenance savings of $100,000 were also accrued by eliminating licensed HP boiler operators. All construction work described to improve energy efficiency and

  19. HTGR nuclear heat source component design and experience

    SciTech Connect

    Peinado, C.O.; Wunderlich, R.G.; Simon, W.A.

    1982-05-01

    The high-temperature gas-cooled reactor (HTGR) nuclear heat source components have been under design and development since the mid-1950's. Two power plants have been designed, constructed, and operated: the Peach Bottom Atomic Power Station and the Fort St. Vrain Nuclear Generating Station. Recently, development has focused on the primary system components for a 2240-MW(t) steam cycle HTGR capable of generating about 900 MW(e) electric power or alternately producing high-grade steam and cogenerating electric power. These components include the steam generators, core auxiliary heat exchangers, primary and auxiliary circulators, reactor internals, and thermal barrier system. A discussion of the design and operating experience of these components is included.

  20. Nuclear rights - nuclear wrongs

    SciTech Connect

    Paul, E.F.; Miller, F.D.; Paul, J.; Ahrens, J.

    1986-01-01

    This book contains 11 selections. The titles are: Three Ways to Kill Innocent Bystanders: Some Conundrums Concerning the Morality of War; The International Defense of Liberty; Two Concepts of Deterrence; Nuclear Deterrence and Arms Control; Ethical Issues for the 1980s; The Moral Status of Nuclear Deterrent Threats; Optimal Deterrence; Morality and Paradoxical Deterrence; Immoral Risks: A Deontological Critique of Nuclear Deterrence; No War Without Dictatorship, No Peace Without Democracy: Foreign Policy as Domestic Politics; Marxism-Leninism and its Strategic Implications for the United States; Tocqueveille War.

  1. Evaluation of thermal energy storage for the proposed Twin Cities District Heating system. [using cogeneration heat production and aquifiers for heat storage

    NASA Technical Reports Server (NTRS)

    Meyer, C. F.

    1980-01-01

    The technical and economic feasibility of incorporating thermal energy storage components into the proposed Twin Cities District heating project was evaluated. The technical status of the project is reviewed and conceptual designs of district heating systems with and without thermal energy storage were compared in terms of estimated capital requirements, fuel consumption, delivered energy cost, and environmental aspects. The thermal energy storage system is based on cogeneration and the storage of heat in aquifers.

  2. Automatic data processing and analysis system for monitoring region around a planned nuclear power plant

    NASA Astrophysics Data System (ADS)

    Tiira, Timo; Kaisko, Outi; Kortström, Jari; Vuorinen, Tommi; Uski, Marja; Korja, Annakaisa

    2015-04-01

    The site of a new planned nuclear power plant is located in Pyhäjoki, eastern coast of the Bay of Bothnia. The area is characterized by low-active intraplate seismicity, with earthquake magnitudes rarely exceeding 4.0. IAEA guidelines state that when a nuclear power plant site is evaluated a network of sensitive seismographs having a recording capability for micro-earthquakes should be installed to acquire more detailed information on potential seismic sources. The operation period of the network should be long enough to obtain a comprehensive earthquake catalogue for seismotectonic interpretation. A near optimal configuration of ten seismograph stations will be installed around the site. A central station, including 3-C high-frequency and strong motion seismographs, is located in the site area. In addition, the network comprises nine high-frequency 3-C stations within a distance of 50 km from the central station. The network is dense enough to fulfil the requirements of azimuthal coverage better than 180o and automatic event location capability down to ~ ML -0.1 within a radius of 25 km from the site. Automatic processing and analysis of the planned seismic network is presented. Following the IAEA guidelines, real-time monitoring of the site area is integrated with the automatic detection and location process operated by the Institute of Seismology, University of Helsinki. In addition interactive data analysis is needed. At the end of year 2013 5 stations have been installed. The automatic analysis utilizes also 7 near by stations of national seismic networks of Finland and Sweden. During this preliminary phase several small earthquakes have been detected. The detection capability and location accuracy of the automatic analysis is estimated using chemical explosions at 15 known sites.

  3. Nuclear ventriculography

    MedlinePlus

    ... ventriculography (RNV); Multiple gate acquisition scan (MUGA); Nuclear cardiology; Cardiomyopathy - nuclear ventriculography ... 56. Udelson JE, Dilsizian V, Bonow RO. Nuclear cardiology. In: Bonow RO, Mann DL, Zipes DP, Libby ...

  4. Nuclear Medicine.

    ERIC Educational Resources Information Center

    Badawi, Ramsey D.

    2001-01-01

    Describes the use of nuclear medicine techniques in diagnosis and therapy. Describes instrumentation in diagnostic nuclear medicine and predicts future trends in nuclear medicine imaging technology. (Author/MM)

  5. Proposal of a novel multifunctional energy system for cogeneration of coke, hydrogen, and power - article no. 052001

    SciTech Connect

    Jin, H.G.; Sun, S.; Han, W.; Gao, L.

    2009-09-15

    This paper proposes a novel multifunctional energy system (MES), which cogenerates coke, hydrogen, and power, through the use of coal and coke oven gas (COG). In this system, a new type of coke oven, firing coal instead of COG as heating resource for coking, is adopted. The COG rich in H{sub 2} is sent to a pressure swing adsorption (PSA) unit to separate about 80% of hydrogen first, and then the PSA purge gas is fed to a combined cycle as fuel. The new system combines the chemical processes and power generation system, along with the integration of chemical conversion and thermal energy utilization. In this manner, both the chemical energy of fuel and thermal energy can be used more effectively. With the same inputs of fuel and the same output of coking heat, the new system can produce about 65% more hydrogen than that of individual systems. As a result, the thermal efficiency of the new system is about 70%, and the exergy efficiency is about 66%. Compared with individual systems, the primary energy saving ratio can reach as high as 12.5%. Based on the graphical exergy analyses, we disclose that the integration of synthetic utilization of COG and coal plays a significant role in decreasing the exergy destruction of the MES system. The promising results obtained may lead to a clean coal technology that will utilize COG and coal more efficiently and economically.

  6. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section A

    NASA Technical Reports Server (NTRS)

    Knightly, W. F.

    1980-01-01

    Various advanced energy conversion systems (ECS) are compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidates which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented for coal fired process boilers. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented.

  7. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section A

    NASA Technical Reports Server (NTRS)

    Knightly, W. F.

    1980-01-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuels consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  8. Proposal and Evaluation of a Gas Engine and Gas Turbine Hybrid Cogeneration System in which Cascaded Heat is Highly Utilized

    NASA Astrophysics Data System (ADS)

    Pak, Pyong Sik

    A high efficiency cogeneration system (CGS) is proposed for utilizing high temperature exhaust gas (HTEG) from a gas engine (GE). In the proposed system, for making use of heat energy of HTEG, H2O turbine (HTb) is incorporated and steam produced by utilizing HTEG is used as working fluid of HTb. HTb exhaust gas is also utilized for increasing power output and for satisfying heat demand in the proposed system. Both of the thermodynamic characteristics of the proposed system and a gas engine CGS (GE-CGS) constructed by using the original GE are estimated. Energy saving characteristics and CO2 reduction effects of the proposed CGS and the GE-CGS are also investigated. It was estimated that the net generated power of the proposed CGS has been increasd 25.5% and net power generation efficiency 6.7%, compared with the the original GE-CGS. It was also shown that the proposed CGS could save 27.0% of energy comsumption and reduce 1137 t-CO2/y, 1.41 times larger than those of GE-CGS, when a case syudy was set and investigated. Improvements of performance by increasing turbine inlet temperature were also investigated.

  9. Influence of System Operation Method on CO2 Emissions of PV/Solar Heat/Cogeneration System

    NASA Astrophysics Data System (ADS)

    Oke, Shinichiro; Kemmoku, Yoshishige; Takikawa, Hirofumi; Sakakibara, Tateki

    A PV/solar heat/cogeneration system is assumed to be installed in a hotel. The system is operated with various operation methods: CO2 minimum operation, fees minimum operation, seasonal operation, daytime operation and heat demand following operation. Of these five operations, the former two are virtual operations that are operated with the dynamic programming method, and the latter three are actual operations. Computer simulation is implemented using hourly data of solar radiation intensity, atmospheric temperature, electric, cooling, heating and hot water supply demands for one year, and the life-cycle CO2 emission and the total cost are calculated for every operations. The calculation results show that the virtual two and the actual three operations reduce the life-cycle CO2 emission by 21% and 13% compared with the conventional system, respectively. In regard to both the CO2 emission and the cost, there is no significant difference between the virtual two operation methods or among actual three operation methods.

  10. Development of a coal/water-slurry-fueled diesel engine for industrial cogeneration: Final and summary report

    SciTech Connect

    Nydick, S.E.

    1987-02-01

    Purpose of the program was to foster the long-range development of a coal/water slurry fuel fired slow-speed, two-stroke diesel engine for efficient and economical power generation in the 8 to 30 MW range for use in industrial cogeneration applications. Five Topical Reports have been prepared. This report contains a short description of the process used to select four coal/water slurries for testing in a single cylinder, slow-speed engine and the test facility and a summary of the program results. The program results conclusively showed that the thermal efficiency of a coal/water engine is comparable to that of a diesel fueled engine and produces considerably lower amounts of exhaust emissions. Furthermore, it appears that the slight decrease in efficiency observed for some of the slurries is related to the additional friction at the piston/ring cylinder liner interface when firing coal/water slurry fuels, rather than any differences in combustion. The engine wear, particularly at the piston ring/cylinder liner interface, is considerably greater than that which occurs with liquid fuels. However, it is concluded that by means of technological advances in materials, design changes and new lubrication concepts, are reliable and economical coal/water slurry slow speed engine could be developed.

  11. Evaluation of Introducing Micro-Cogeneration System to Residential Houses Based on the Monitored Daily-Basis Energy Demand Data

    NASA Astrophysics Data System (ADS)

    Inada, Ryo; Sugihara, Hideharu; Saeki, Osamu; Tsuji, Kiichiro

    In order to reduce CO2 emission from residential sector in Japan, PEFC with high efficiency and low environmental impact is expected as one of the promising micro co-generation (μCGS) system. However, the energy demand in houses are largely different each other and the profiles are also changed every day. So, when μCGS is actually introduced, it is necessary to examine the equipment capacity and operation of μCGS in each house respectively. In this paper, the optimization model is developed in order to evaluate the μCGS based on daily-basis demand data. Using actually monitored energy demand data in four households, the differences between using daily-basis data and using the monthly average data are evaluated from viewpoints of economic and environmental performance of μCGS systems. Moreover, by adding the penalty factor to disposal heat of μCGS, the results have been that system configuration and system operation of μCGS can attain CO2 reduction and energy conservation as well as cost reduction.

  12. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section A

    NASA Astrophysics Data System (ADS)

    Knightly, W. F.

    1980-05-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuels consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  13. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section B

    NASA Astrophysics Data System (ADS)

    Knightly, W. F.

    1980-05-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  14. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 2: Residual-fired nocogeneration process boiler

    NASA Astrophysics Data System (ADS)

    Knightly, W. F.

    1980-05-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  15. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section A

    NASA Astrophysics Data System (ADS)

    Knightly, W. F.

    1980-05-01

    Various advanced energy conversion systems (ECS) are compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidates which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on-site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented for coal fired process boilers. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented.

  16. EARLY ENTRANCE CO-PRODUCTION PLANT--DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    John W. Rich

    2001-03-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors Texaco Power and Gasification (now ChevronTexaco), SASOL Technology Ltd., and Nexant Inc. entered into a Cooperative Agreement with the USDOE, National Energy Technology Laboratory (NETL) to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the US to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co--product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases: Phase 1 is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase 2 is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase 3 updates the original EECP design based on results from Phase 2, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report is WMPI's third quarterly technical progress report. It covers the period performance from October 1, 2001 through December 31, 2001.

  17. EARLY ENTRANCE CO-PRODUCTION PLANT-DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    Unknown

    2002-07-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors entered into a Cooperative Agreement with the US Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) to assess the techno-economic viability of building an Early Entrance Co-Production Plant (EECP) in the US to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases. Phase 1 is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase 2 is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase 3 updates the original EECP design based on results from Phase 2, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report covers the period performance from April 1, 2002 through June 30, 2002.

  18. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section B

    NASA Technical Reports Server (NTRS)

    Knightly, W. F.

    1980-01-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  19. Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 2: Residual-fired nocogeneration process boiler

    NASA Technical Reports Server (NTRS)

    Knightly, W. F.

    1980-01-01

    About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

  20. Nuclear weapons and nuclear war

    SciTech Connect

    Cassel, C.; McCally, M.; Abraham, H.

    1984-01-01

    This book examines the potential radiation hazards and environmental impacts of nuclear weapons. Topics considered include medical responsibility and thermonuclear war, the threat of nuclear war, nuclear weaponry, biological effects, radiation injury, decontamination, long-term effects, ecological effects, psychological aspects, the economic implications of nuclear weapons and war, ethics, civil defense, arms control, nuclear winter, and long-term biological consequences of nuclear war.

  1. Nuclear Theory - Nuclear Power

    NASA Astrophysics Data System (ADS)

    Svenne, J. P.; Canton, L.; Kozier, K. S.

    2008-01-01

    The results from modern nuclear theory are accurate and reliable enough to be used for practical applications, in particular for scattering that involves few-nucleon systems of importance to nuclear power. Using well-established nucleon-nucleon (NN) interactions that fit well the NN scattering data, and the AGS form of the three-body theory, we have performed precise calculations of low-energy neutron-deuteron (n+d) scattering. We show that three-nucleon force effects that have impact on the low-energy vector analyzing powers have no practical effects on the angular distribution of the n+d cross-section. There appear to be problems for this scattering in the evaluated nuclear data file (ENDF) libraries, at the incident neutron energies less than 3.2 MeV. Supporting experimental data in this energy region are rather old (>25 years), sparse and often inconsistent. Our three-body results at low energies, 50 keV to 10.0 MeV, are compared to the ENDF/B-VII.0 and JENDL (Japanese Evaluated Nuclear Data Library) -3.3 evaluated angular distributions. The impact of these results on the calculated reactivity for various critical systems involving heavy water is shown.

  2. Nuclear choices

    SciTech Connect

    Wolfson, R.

    1991-01-01

    This book contains part of the series New Liberal Arts, which is intended to make science and technology more accessible to students of the liberal arts. Volume in hand provides a comprehensive, multifaceted examination of nuclear energy, in nontechnical terms. Wolfson explains the basics of nuclear energy and radiation, nuclear power..., and nuclear weapons..., and he invites readers to make their own judgments on controversial nuclear issues. Illustrated with photos and diagrams. Each chapter contains suggestions for additional reading and a glossary. For policy, science, and general collections in all libraries. (ES) Topics contained include Atoms and nuclei. Effects and uses of radiation. Energy and People. Reactor safety. Nuclear strategy. Defense in the nuclear age. Nuclear power, nuclear weapons, and nuclear futures.

  3. Development of a Novel Efficient Solid-Oxide Hybrid for Co-generation of Hydrogen and Electricity Using Nearby Resources for Local Application

    SciTech Connect

    Tao, Greg, G.; Virkar, Anil, V.; Bandopadhyay, Sukumar; Thangamani, Nithyanantham; Anderson, Harlan, U.; Brow, Richard, K.

    2009-06-30

    Developing safe, reliable, cost-effective, and efficient hydrogen-electricity co-generation systems is an important step in the quest for national energy security and minimized reliance on foreign oil. This project aimed to, through materials research, develop a cost-effective advanced technology cogenerating hydrogen and electricity directly from distributed natural gas and/or coal-derived fuels. This advanced technology was built upon a novel hybrid module composed of solid-oxide fuel-assisted electrolysis cells (SOFECs) and solid-oxide fuel cells (SOFCs), both of which were in planar, anode-supported designs. A SOFEC is an electrochemical device, in which an oxidizable fuel and steam are fed to the anode and cathode, respectively. Steam on the cathode is split into oxygen ions that are transported through an oxygen ion-conducting electrolyte (i.e. YSZ) to oxidize the anode fuel. The dissociated hydrogen and residual steam are exhausted from the SOFEC cathode and then separated by condensation of the steam to produce pure hydrogen. The rationale was that in such an approach fuel provides a chemical potential replacing the external power conventionally used to drive electrolysis cells (i.e. solid oxide electrolysis cells). A SOFC is similar to the SOFEC by replacing cathode steam with air for power generation. To fulfill the cogeneration objective, a hybrid module comprising reversible SOFEC stacks and SOFC stacks was designed that planar SOFECs and SOFCs were manifolded in such a way that the anodes of both the SOFCs and the SOFECs were fed the same fuel, (i.e. natural gas or coal-derived fuel). Hydrogen was produced by SOFECs and electricity was generated by SOFCs within the same hybrid system. A stand-alone 5 kW system comprising three SOFEC-SOFC hybrid modules and three dedicated SOFC stacks, balance-of-plant components (including a tailgas-fired steam generator and tailgas-fired process heaters), and electronic controls was designed, though an overall

  4. Analysis of defects in externally driven dust-density wavefronts in cogenerated dusty plasma using the time-resolved Hilbert-Huang transform

    NASA Astrophysics Data System (ADS)

    Sarkar, Sanjib; Barman, Chiranjib; Mondal, Malay; Bose, M.; Mukherjee, S.

    2016-05-01

    Analysis of defects in externally driven dust-density wavefronts (DDWs) in cogenerated dusty plasma has been carried out. The DDWs are excited for threshold positive bias through another T-shaped electrode which is placed inbetween two main discharge electrodes. Spatiotemporal evolution of the DDWs reveals a wave defect and non-propagating wave mode in the DDW field. A space-time plot and the time-resolved Hilbert-Huang transform (HHT) were employed to analyze the spatiotemporal wave data at a specific location in the wave field.

  5. Actual Condition Evaluation of Cogeneration System in an Urbanized Hotel, and Study of the Optimal Operation to Minimize the CO2 Emission

    NASA Astrophysics Data System (ADS)

    Katsuta, Masafumi; Kaneko, Akira; Yamamoto, Toru

    Recently, there is an important subject to reduce of the CO2 emission discharged from a building. A cogeneration system (CGS) is one of the effective facilities to reduce of the CO2 emission, but prudent consideration is required in design and operation. Because it is necessary to be matching electric demand and heat demand in order to obtain the high efficiency. In this paper, it is evaluated the power generation efficiency and heat recovery one of CGS in the actual urbanized hotel as measurement result. In addition, the optimal operation analysis is carried out in order to minimize CO2 emission in the present facility.

  6. Advanced coal-fueled industrial cogeneration gas turbine system. Annual report, 2 June 1992--1 June 1993

    SciTech Connect

    LeCren, L.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1993-06-01

    This program was initiated in June of 1986 because advances in coal-fueled gas turbine technology over the previous few years, together with DOE-METC sponsored studies, served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine could ultimately be the preferred system in appropriate market application sectors. In early 1991 it became evident that a combination of low natural gas prices, stringent emission limits of the Clean Air Act and concerns for CO{sub 2} emissions made the direct coal-fueled gas turbine less attractive. In late 1991 it was decided not to complete this program as planned. The objective of the Solar/METC program was to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. Component development of the coal-fueled combustor island and cleanup system while not complete indicated that the planned engine test was feasible. Preliminary designs of the engine hardware and installation were partially completed. A successful conclusion to the program would have initiated a continuation of the commercialization plan through extended field demonstration runs. After notification of the intent not to complete the program a replan was carried out to finish the program in an orderly fashion within the framework of the contract. A contract modification added the first phase of the Advanced Turbine Study whose objective is to develop high efficiency, natural gas fueled gas turbine technology.

  7. The market viability of nuclear hydrogen technologies.

    SciTech Connect

    Botterud, A.; Conzelmann, G.; Petri, M. C.; Yildiz, B.

    2007-04-06

    significantly different results in regards to the relative profitability of the different technologies and configurations. This is the case both with a deterministic and a stochastic analysis, as shown in the tables below. The flexibility in output products clearly adds substantial value to the HPE-ALWR and HTE-HTGR plants. In fact, under the GBM assumption for prices, the HTE-HTGR plant becomes more profitable than the SI-HTGR configuration, although SI-HTGR has a much lower levelized cost. For the HTE-HTGR plant it is also profitable to invest in additional electric turbine capacity (Case b) in order to fully utilize the heat from the nuclear reactor for electricity production when this is more profitable than producing hydrogen. The technologies are all at the research and development stage, so there are significant uncertainties regarding the technology cost and performance assumptions used in this analysis. As the technologies advance, the designers need to refine the cost and performance evaluation to provide a more reliable set of input for a more rigorous analysis. In addition, the durability of the catalytic activity of the materials at the hydrogen plant during repetitive price cycling is of prime importance concerning the flexibility of switching from hydrogen to electricity production. However, given the potential significant economic benefit that can be brought from cogeneration with the flexibility to quickly react to market signals, DOE should consider R&D efforts towards developing durable materials and processes that can enable this type of operation. Our future work will focus on analyzing a range of hydrogen production technologies associated with an extension of the financial analysis framework presented here. We are planning to address a variety of additional risks and options, such as the value of modular expansion in addition to the co-generation capability (i.e., a modular increase in the hydrogen production capacity of a plant in a given market with

  8. Nuclear Winter.

    ERIC Educational Resources Information Center

    Ehrlich, Anne

    1984-01-01

    "Nuclear Winter" was recently coined to describe the climatic and biological effects of a nuclear war. These effects are discussed based on models, simulations, scenarios, and projections. Effects on human populations are also considered. (JN)

  9. Nuclear Chemistry.

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1979

    1979-01-01

    Provides a brief review of the latest developments in nuclear chemistry. Nuclear research today is directed toward increased activity in radiopharmaceuticals and formation of new isotopes by high-energy, heavy-ion collisions. (Author/BB)

  10. Nuclear Scans

    MedlinePlus

    Nuclear scans use radioactive substances to see structures and functions inside your body. They use a special ... images. Most scans take 20 to 45 minutes. Nuclear scans can help doctors diagnose many conditions, including ...

  11. Nuclear Fuels.

    ERIC Educational Resources Information Center

    Nash, J. Thomas

    1983-01-01

    Trends in and factors related to the nuclear industry and nuclear fuel production are discussed. Topics addressed include nuclear reactors, survival of the U.S. uranium industry, production costs, budget cuts by the Department of Energy and U.S. Geological survey for resource studies, mining, and research/development activities. (JN)

  12. Nuclear weapons, nuclear effects, nuclear war

    SciTech Connect

    Bing, G.F.

    1991-08-20

    This paper provides a brief and mostly non-technical description of the militarily important features of nuclear weapons, of the physical phenomena associated with individual explosions, and of the expected or possible results of the use of many weapons in a nuclear war. Most emphasis is on the effects of so-called ``strategic exchanges.``

  13. Analysis of operating alternatives for the Naval Computer and Telecommunications Station Cogeneration Facility at Naval Air Station North Island, San Diego, California

    SciTech Connect

    Parker, S.A.; Carroll, D.M.; McMordie, K.L.; Brown, D.R.; Daellenbach, K.K.; Shankle, S.A.; Stucky, D.J.

    1993-12-01

    The Naval Facilities Engineering Command Southwestern Division commissioned Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to determine the most cost-effective approach to the operation of the cogeneration facility in the Naval Computer and Telecommunications Station (NCTS) at the Naval Air Station North Island (NASNI). Nineteen alternative scenarios were analyzed by PNL on a life-cycle cost basis to determine whether to continue operating the cogeneration facility or convert the plant to emergency-generator status. This report provides the results of the analysis performed by PNL for the 19 alternative scenarios. A narrative description of each scenario is provided, including information on the prime mover, electrical generating efficiency, thermal recovery efficiency, operational labor, and backup energy strategy. Descriptions of the energy and energy cost analysis, operations and maintenance (O&M) costs, emissions and related costs, and implementation costs are also provided for each alternative. A summary table presents the operational cost of each scenario and presents the result of the life-cycle cost analysis.

  14. EARLY ENTRANCE CO-PRODUCTION PLANT--DECENTRALIZED GASIFICATION COGENERATION TRANSPORTATION FUELS AND STEAM FROM AVAILABLE FEEDSTOCKS

    SciTech Connect

    John W. Rich

    2003-06-01

    Waste Processors Management, Inc. (WMPI), along with its subcontractors Texaco Power & Gasification (now ChevronTexaco), SASOL Technology Ltd., and Nexant Inc. entered into a Cooperative Agreement DE-FC26-00NT40693 with the U. S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) to assess the technoeconomic viability of building an Early Entrance Co-Production Plant (EECP) in the United States to produce ultra clean Fischer-Tropsch (FT) transportation fuels with either power or steam as the major co-product. The EECP design includes recovery and gasification of low-cost coal waste (culm) from physical coal cleaning operations and will assess blends of the culm with coal or petroleum coke. The project has three phases. Phase I is the concept definition and engineering feasibility study to identify areas of technical, environmental and financial risk. Phase II is an experimental testing program designed to validate the coal waste mixture gasification performance. Phase III updates the original EECP design based on results from Phase II, to prepare a preliminary engineering design package and financial plan for obtaining private funding to build a 5,000 barrel per day (BPD) coal gasification/liquefaction plant next to an existing co-generation plant in Gilberton, Schuylkill County, Pennsylvania. The current report covers the period performance from January 1, 2003 through March 31, 2003. Phase I Task 6 activities of Preliminary Site Analysis were documented and reported as a separate Topical Report on February 2003. Most of the other technical activities were on hold pending on DOE's announcement of the Clean Coal Power Initiative (CCPI) awards. WMPI was awarded one of the CCPI projects in late January 2003 to engineer, construct and operate a first-of-kind gasification/liquefaction facility in the U.S. as a continued effort for the current WMPI EECP engineering feasibility study. Since then, project technical activities were focused on: (1

  15. From the first nuclear power plant to fourth-generation nuclear power installations [on the 60th anniversary of the World's First nuclear power plant

    NASA Astrophysics Data System (ADS)

    Rachkov, V. I.; Kalyakin, S. G.; Kukharchuk, O. F.; Orlov, Yu. I.; Sorokin, A. P.

    2014-05-01

    Successful commissioning in the 1954 of the World's First nuclear power plant constructed at the Institute for Physics and Power Engineering (IPPE) in Obninsk signaled a turn from military programs to peaceful utilization of atomic energy. Up to the decommissioning of this plant, the AM reactor served as one of the main reactor bases on which neutron-physical investigations and investigations in solid state physics were carried out, fuel rods and electricity generating channels were tested, and isotope products were bred. The plant served as a center for training Soviet and foreign specialists on nuclear power plants, the personnel of the Lenin nuclear-powered icebreaker, and others. The IPPE development history is linked with the names of I.V. Kurchatov, A.I. Leipunskii, D.I. Blokhintsev, A.P. Aleksandrov, and E.P. Slavskii. More than 120 projects of various nuclear power installations were developed under the scientific leadership of the IPPE for submarine, terrestrial, and space applications, including two water-cooled power units at the Beloyarsk NPP in Ural, the Bilibino nuclear cogeneration station in Chukotka, crawler-mounted transportable TES-3 power station, the BN-350 reactor in Kazakhstan, and the BN-600 power unit at the Beloyarsk NPP. Owing to efforts taken on implementing the program for developing fast-neutron reactors, Russia occupied leading positions around the world in this field. All this time, IPPE specialists worked on elaborating the principles of energy supertechnologies of the 21st century. New large experimental installations have been put in operation, including the nuclear-laser setup B, the EGP-15 accelerator, the large physical setup BFS, the high-pressure setup SVD-2; scientific, engineering, and technological schools have been established in the field of high- and intermediate-energy nuclear physics, electrostatic accelerators of multicharge ions, plasma processes in thermionic converters and nuclear-pumped lasers, physics of compact

  16. Nuclear mortality

    SciTech Connect

    Krauthammer, C.

    1983-10-01

    The author notes that the anti-nuclear movement is shifting its focus from bodily harm to concern for the impact on our souls from building and threatening the use of nuclear weapons. Two aspects of nuclear deterrence receiving the most public attention are the freeze effort to halt weapons modernization and the no-first-use effort to take down the nuclear umbrella. Opponents attack both the countervalue and the counterforce approach, but the arguments of the Catholic bishops, Jonathan Schell, and others stop short of unilateral disarmament, which would be the greatest threat to our survival. Mr. Krauthammer observes that nuclear deterrence has worked, however, and will continue to be useful only if potential adversaries believe we have the will to use nuclear weapons. 2 references. (DCK)

  17. Nuclear astrophysics

    SciTech Connect

    Haxton, W.C.

    1992-01-01

    The problem of core-collapse supernovae is used to illustrate the many connections between nuclear astrophysics and the problems nuclear physicists study in terrestrial laboratories. Efforts to better understand the collapse and mantle ejection are also motivated by a variety of interdisciplinary issues in nuclear, particle, and astrophysics, including galactic chemical evolution, neutrino masses and mixing, and stellar cooling by the emission of new particles. The current status of theory and observations is summarized.

  18. Nuclear astrophysics

    SciTech Connect

    Haxton, W.C.

    1992-12-31

    The problem of core-collapse supernovae is used to illustrate the many connections between nuclear astrophysics and the problems nuclear physicists study in terrestrial laboratories. Efforts to better understand the collapse and mantle ejection are also motivated by a variety of interdisciplinary issues in nuclear, particle, and astrophysics, including galactic chemical evolution, neutrino masses and mixing, and stellar cooling by the emission of new particles. The current status of theory and observations is summarized.

  19. Nuclear Astrophysics

    NASA Astrophysics Data System (ADS)

    Drago, Alessandro

    2005-04-01

    The activity of the Italian nuclear physicists community in the field of Nuclear Astrophysics is reported. The researches here described have been performed within the project "Fisica teorica del nucleo e dei sistemi a multi corpi", supported by the Ministero dell'Istruzione, dell'Università e della Ricerca.

  20. Nuclear safety

    NASA Technical Reports Server (NTRS)

    Buden, D.

    1991-01-01

    Topics dealing with nuclear safety are addressed which include the following: general safety requirements; safety design requirements; terrestrial safety; SP-100 Flight System key safety requirements; potential mission accidents and hazards; key safety features; ground operations; launch operations; flight operations; disposal; safety concerns; licensing; the nuclear engine for rocket vehicle application (NERVA) design philosophy; the NERVA flight safety program; and the NERVA safety plan.

  1. An Analysis of a Micro Cogeneration System Composed of Solid Oxide Fuel Cell, Microturbine, and H2O/LiBr Absorption Refrigerator

    NASA Astrophysics Data System (ADS)

    Saito, Motohiro; Yoshida, Hideo; Iwamoto, Yuhei; Ueda, Akio

    A micro cogeneration system composed of a solid oxide fuel cell (SOFC) and a microturbine (MT) and an absorption refrigerator is analyzed thermodynamically. The performance analysis is conducted on the basis of the balance of macroscopic mass and energy with additional empirical correlations and operating data. First, the basic characteristics of the power generation (SOFC+MT) section and the absorption refrigerator section are clarified. Second, under the conditions of the cell temperature of 900 °C and the turbine inlet temperature of 900 °C, the optimum design points are determined. Furthermore, the annual energy saving obtained by the present system is also evaluated in the light of energy-use data for Japan. As a result, the annual fuel consumption is reduced by 32%, 36% and 42%, for apartments, offices and hotels, respectively.

  2. Use of biogas for cogeneration of heat and electricity for local application: performance evaluation of an engine power generator and a sludge thermal dryer.

    PubMed

    Lobato, L C S; Chernicharo, C A L; Pujatti, F J P; Martins, O M; Melo, G C B; Recio, A A R

    2013-01-01

    A small unit of cogeneration of energy and heat was tested at the Centre for Research and Training on Sanitation UFMG/COPASA - CePTS, located at the Arrudas Sewage Treatment Plant, in Belo Horizonte, Minas Gerais, Brazil. The unit consisted of an engine power generator adapted to run on biogas, a thermal dryer prototype and other peripherals (compressor, biogas storage tank, air blower, etc.). The heat from engine power generator exhaust gases was directed towards the thermal dryer prototype to dry the sludge and disinfect it. The results showed that the experimental apparatus is self-sufficient in electricity, even producing a surplus, available for other uses. The tests of drying and disinfection of sludge lasted 7 h, leading to an increase in solids content from 4 to 8% (50% reduction in sludge volume). Although the drying of sludge was not possible (only thickening was achieved), the disinfection process proved very effective, enabling the complete inactivation of helminth eggs. PMID:23128634

  3. Energy integrated dairy farm system in Georgia: Technical manual, Mathis/P and M Dairy Farm, Social Circle, Georgia. [Cogeneration using biogas; heat recovery

    SciTech Connect

    Walsh, J.L. Jr.; Ross, C.C.; Lamade, R.M.

    1986-09-01

    This manual describes a project sponsored to optimize energy generation and utilization in the agricultural or food processing industry. The particular project involves the Mathis/P and M Dairy Farm located in Social Circle, Georgia (about 60 miles east of Atlanta). The farm is designed for a 550 milking cow herd and produces certified raw milk for sale to a processing plant located in Atlanta. The project converted the Mathis/P and and M Dairy into an energy integrated dairy farm system (EIDFS) in which the interaction of the subsystems and components are modified such that the energy resources of the farm are optimized. This manual is a description of the system, subsystems and components composing the Mathis EIDFS and is primarily intended for farmers, extension agents, and equipment manufacturers who might be involved in future EIDFS projects. Cogeneration using biogas from manures and heat recovery from the refrigeration machinery were among the options chosen.

  4. Cogeneration microwave food dryer

    SciTech Connect

    Bernstein, S.; Ushimaru, K.

    1986-11-18

    A method is described for efficient removal of moisture from a moist interior solid product with controlled physical change comprising the steps of: convection heating the solid product with a heated air stream to remove internal moisture to achieve a maximum moisture removal rate while maintaining the product below a predetermined maximum temperature thereby controlling additional physical change to the product, maintaining the convection heating until a predetermined critical moisture content of the product is achieved beyond which critical moisture content the drying rate decreases and the temperature of the product increases. The product temperature increases above the predetermined determined maximum with continued convection heating due to decreased evaporation and decreased surface migration of moisture, and then exposing the product to microwave radiation to increase moisture migration toward the product surface for removal and evaporation cooling to maintain the product below the maximum temperature until the desired moisture removal is completed, whereby the desired moisture will be efficiently removed from the product while controlling internal and surface physical change to the product.

  5. Coal gasification cogeneration process

    SciTech Connect

    Marten, J.H.

    1990-10-16

    This patent describes a process for the coproduction of a combustible first gas stream usable as an energy source, a sulfur-dioxide-containing second gas stream usable as a source for oxidant in the gasification of coal and a sulfur-dioxide-containing third gas stream usable as a feedstock for the production of sulfuric acid. It comprises: reacting coal in a coal gasification zone in the presence of an oxidant under partial coal-gasifying conditions to produce carbonaceous char and a crude gas stream; separating sulfur-containing compounds from the crude gas stream in a sulfur recovery zone to produce a combustible first gas stream and elemental sulfur; reacting the carbonaceous char and gypsum in a reaction zone in proportions such that the non-gypsum portion of the carbonaceous char and gypsum mixture contains sufficient reducing potential to reduce sulfur in the gypsum to gaseous compounds of sulfur in a +4 or lower oxidation state under reducing conditions to produce first a sulfur-dioxide-containing second gas stream which contains weaker SO{sub 2} produced in an early stage of the reaction zone and removed from the reaction zone, and then a sulfur-dioxide-containing third gas stream which contains concentrated SO{sub 2} recovered from a later stage of the reaction zone.

  6. Energy cogeneration handbook

    SciTech Connect

    Polimeros, G.

    1981-01-01

    Design criteria for central plants that facilitate energy conversion, utilization, and conservation, an evaluation of project alternatives and an examination of systems and their functions to achieve optimum overall design in the generation of heating, cooling, and electricity are presented.

  7. Nuclear hostages

    SciTech Connect

    O'Keefe, B.J.

    1983-01-01

    Classical physics since Roentgen's discovery of X-rays led quickly to work on atomic structure and the Nuclear Age. The author traces the history of decisions to pursue nuclear fission, the organization of the Manhattan Project, the compromises of the 1963 test ban treaty, and the dilemma of nuclear weapons development and deployment that now hold mankind hostage. He reviews the rationale for limited nuclear war, first strike, massive retaliation, non-proliferation, and the Strategic Arms Limitation Talks (SALT) treaties. He argues that the concepts of mobile MX weapons, fratricide, and population dispersal for civil defense are unworkable, suggesting a program of unilaterally withdrawing tactical nuclear weapons from Europe and strengthening intelligence and law-enforcement powers to withstand terrorist activity. Economic cooperation and political reconciliation may take a generation to achieve, but should be our national goal.

  8. Nuclear Astrophysics

    NASA Astrophysics Data System (ADS)

    Bombaci, Ignazio

    2003-04-01

    In this report I will try to illustrate some of the main research themes and "hot topics" in nuclear astrophysics. The particular aim of the present report is to briefly illustrate the research activities, in the field of nuclear astrophysics, performed by the Italian nuclear physicist community within the "Programma di Interesse Nazionale su Fisica Teorica del Nucleo e dei Sistemi a Molti Corpi" (National Research Program on Theoretical Physics of Nuclei and Many Body Systems) supported by the "Ministero dell'Istruzione dell'Università e della Ricerca".

  9. Nuclear Speckles

    PubMed Central

    Spector, David L.; Lamond, Angus I.

    2011-01-01

    Nuclear speckles, also known as interchromatin granule clusters, are nuclear domains enriched in pre-mRNA splicing factors, located in the interchromatin regions of the nucleoplasm of mammalian cells. When observed by immunofluorescence microscopy, they usually appear as 20–50 irregularly shaped structures that vary in size. Speckles are dynamic structures, and their constituents can exchange continuously with the nucleoplasm and other nuclear locations, including active transcription sites. Studies on the composition, structure, and dynamics of speckles have provided an important paradigm for understanding the functional organization of the nucleus and the dynamics of the gene expression machinery. PMID:20926517

  10. (Nuclear theory). [Research in nuclear physics

    SciTech Connect

    Haxton, W.

    1990-01-01

    This report discusses research in nuclear physics. Topics covered in this paper are: symmetry principles; nuclear astrophysics; nuclear structure; quark-gluon plasma; quantum chromodynamics; symmetry breaking; nuclear deformation; and cold fusion. (LSP)

  11. Nuclear forces

    SciTech Connect

    Machleidt, R.

    2013-06-10

    These lectures present an introduction into the theory of nuclear forces. We focus mainly on the modern approach, in which the forces between nucleons emerge from low-energy QCD via chiral effective field theory.

  12. Nuclear Disarmament.

    ERIC Educational Resources Information Center

    Johnson, Christopher

    1982-01-01

    Material about nuclear disarmament and the arms race should be included in secondary school curricula. Teachers can present this technical, controversial, and frightening material in a balanced and comprehensible way. Resources for instructional materials are listed. (PP)

  13. Nuclear battlefields

    SciTech Connect

    Arkin, W.M.; Fieldhouse, R.W.

    1985-01-01

    This book provides complete data on the nuclear operations and research facilities in the U.S.A., the U.S.S.R., France, China and the U.K. It describes detailed estimates on the U.S.S.R.'s nuclear stockpile for over 500 locations. It shows how non-nuclear countries cooperate with the world-wide war machine. And it maps the U.S. nuclear facilities from Little America, WY, and Charleston, SC, to the battleships patroling the world's oceans and subs stalking under the sea. The data were gathered from unclassified sources through the Freedom of Information Act, from data supplied to military installations, and from weapons source books. It provides guidance for policymakers, government and corporate officials.

  14. NUCLEAR REACTOR

    DOEpatents

    Sherman, J.; Sharbaugh, J.E.; Fauth, W.L. Jr.; Palladino, N.J.; DeHuff, P.G.

    1962-10-23

    A nuclear reactor incorporating seed and blanket assemblies is designed. Means are provided for obtaining samples of the coolant from the blanket assemblies and for varying the flow of coolant through the blanket assemblies. (AEC)

  15. Nuclear Data

    SciTech Connect

    White, Morgan C.

    2014-01-23

    PowerPoint presentation targeted for educational use. Nuclear data comes from a variety of sources and in many flavors. Understanding where the data you use comes from and what flavor it is can be essential to understand and interpret your results. This talk will discuss the nuclear data pipeline with particular emphasis on providing links to additional resources that can be used to explore the issues you will encounter.

  16. Nuclear Nonproliferation

    SciTech Connect

    Atkins-Duffin, C E

    2008-12-10

    With an explosion equivalent of about 20kT of TNT, the Trinity test was the first demonstration of a nuclear weapon. Conducted on July 16, 1945 in Alamogordo, NM this site is now a Registered National Historic Landmark. The concept and applicability of nuclear power was demonstrated on December 20, 1951 with the Experimental Breeder Reactor Number One (EBR-1) lit four light bulbs. This reactor is now a Registered National Historic Landmark, located near Arco, ID. From that moment forward it had been clearly demonstrated that nuclear energy has both peaceful and military applications and that the civilian and military fuel cycles can overlap. For the more than fifty years since the Atoms for Peace program, a key objective of nuclear policy has been to enable the wider peaceful use of nuclear energy while preventing the spread of nuclear weapons. Volumes have been written on the impact of these two actions on the world by advocates and critics; pundits and practioners; politicians and technologists. The nations of the world have woven together a delicate balance of treaties, agreements, frameworks and handshakes that are representative of the timeframe in which they were constructed and how they have evolved in time. Collectively these vehicles attempt to keep political will, nuclear materials and technology in check. This paper captures only the briefest abstract of the more significant aspects on the Nonproliferation Regime. Of particular relevance to this discussion is the special nonproliferation sensitivity associated with the uranium isotope separation and spent fuel reprocessing aspects of the nuclear fuel cycle.

  17. Nuclear Structure

    NASA Astrophysics Data System (ADS)

    Gargano, Angela

    2003-04-01

    An account of recent studies in the field of theoretical nuclear structure is reported. These studies concern essentially research activities performed under the Italian project "Fisica Teorica del Nucleo e dei Sistemi a Molti Corpi". Special attention is addressed to results obtained during the last two years as regards the development of new many-body techniques as well as the interpretation of new experimental aspects of nuclear structure.

  18. Nuclear astrophysics

    NASA Astrophysics Data System (ADS)

    Arnould, M.; Takahashi, K.

    1999-03-01

    Nuclear astrophysics is that branch of astrophysics which helps understanding of the Universe, or at least some of its many faces, through the knowledge of the microcosm of the atomic nucleus. It attempts to find as many nuclear physics imprints as possible in the macrocosm, and to decipher what those messages are telling us about the varied constituent objects in the Universe at present and in the past. In the last decades much advance has been made in nuclear astrophysics thanks to the sometimes spectacular progress made in the modelling of the structure and evolution of the stars, in the quality and diversity of the astronomical observations, as well as in the experimental and theoretical understanding of the atomic nucleus and of its spontaneous or induced transformations. Developments in other subfields of physics and chemistry have also contributed to that advance. Notwithstanding the accomplishment, many long-standing problems remain to be solved, and the theoretical understanding of a large variety of observational facts needs to be put on safer grounds. In addition, new questions are continuously emerging, and new facts endangering old ideas. This review shows that astrophysics has been, and still is, highly demanding to nuclear physics in both its experimental and theoretical components. On top of the fact that large varieties of nuclei have to be dealt with, these nuclei are immersed in highly unusual environments which may have a significant impact on their static properties, the diversity of their transmutation modes, and on the probabilities of these modes. In order to have a chance of solving some of the problems nuclear astrophysics is facing, the astrophysicists and nuclear physicists are obviously bound to put their competence in common, and have sometimes to benefit from the help of other fields of physics, like particle physics, plasma physics or solid-state physics. Given the highly varied and complex aspects, we pick here some specific nuclear

  19. Nuclear telemedicine

    NASA Astrophysics Data System (ADS)

    Morrison, R. T.; Szasz, I. J.

    1990-06-01

    Diagnostic nuclear medicine patient images have been transniitted for 8 years from a regional conununity hospital to a university teaching hospital 700 kiloinetres away employing slow scan TV and telephone. Transruission and interpretation were done at the end of each working day or as circumstances required in cases of emergencies. Referring physicians received the nuclear medicine procedure report at the end of the completion day or within few minutes of completion in case of emergency procedures. To date more than 25 patient studies have been transmitted for interpretation. Blinded reinterpretation of the original hard copy data of 350 patient studies resulted in 100 agreement with the interpretation of transmitted data. This technique provides high quality diagnostic and therapeutic nuclear medicine services in remote hospitals where the services of an on-site nuclear physician is not available. 2. HISTORY Eight years ago when the nuclear medicine physician at Trail Regional Hospital left the Trail area and an other could not be recruited we examined the feasibility of image transmission by phone for interpretation since closing the department would have imposed unacceptable physical and financial hardship and medical constraints on the patient population the nearest nuclear medicine facility was at some 8 hours drive away. In hospital patients would have to be treated either based purely on physical findings or flown to Vancouver at considerable cost to the health care system (estimated cost $1500.

  20. Development of technical solutions for optimizing the hydraulic and thermal process circuits of the P-90 heat-recovery boiler used as part of the PGU-450T combined-cycle plant at the severozapadnaya cogeneration station

    NASA Astrophysics Data System (ADS)

    Belyakov, I. I.; Breus, V. I.; Barannikov, A. B.

    2012-03-01

    Results from work on analyzing the performance of the P-90 heat-recovery boilers used as part of the PGU-450T-based Unit 1 at the Severozapadnaya cogeneration station and on revealing factors causing damage to the bends of evaporating tubes are presented. Technical solutions using which a V-94.2 gas turbine can be replaced by a GTE-160 gas turbine are considered.

  1. Nuclear waste

    SciTech Connect

    Not Available

    1988-05-01

    This paper discusses how, as part of the Department of Energy's implementation of the Nuclear Waste Policy Act of 1982, DOE is required to investigate a site at Yucca Mountain, Nevada and, if it determines that the site is suitable, recommend to the President its selection for a nuclear waste repository. The Nuclear Regulatory Commission, in considering development of the plan, issued five objections, one of which is DOE's failure to recognize the range of alternative conceptual models of the Yucca Mountain site that can be supported by the limited existing technical data. At the end of the quarter DOE directed its project offices in Washington and Texas to begin orderly phase-out of all site-specific repository activities. Costs for this phase-out are $53 million for the Deaf Smith site and $85 million for the Hanford site.

  2. Nuclear scales

    SciTech Connect

    Friar, J.L.

    1998-12-01

    Nuclear scales are discussed from the nuclear physics viewpoint. The conventional nuclear potential is characterized as a black box that interpolates nucleon-nucleon (NN) data, while being constrained by the best possible theoretical input. The latter consists of the longer-range parts of the NN force (e.g., OPEP, TPEP, the {pi}-{gamma} force), which can be calculated using chiral perturbation theory and gauged using modern phase-shift analyses. The shorter-range parts of the force are effectively parameterized by moments of the interaction that are independent of the details of the force model, in analogy to chiral perturbation theory. Results of GFMC calculations in light nuclei are interpreted in terms of fundamental scales, which are in good agreement with expectations from chiral effective field theories. Problems with spin-orbit-type observables are noted.

  3. Nuclear pursuits

    SciTech Connect

    Not Available

    1993-05-01

    This table lists quantities of warheads (in stockpile, peak number per year, total number built, number of known test explosions), weapon development milestones (developers of the atomic bomb and hydrogen bomb, date of first operational ICBM, first nuclear-powered naval SSN in service, first MIRVed missile deployed), and testing milestones (first fission test, type of boosted fission weapon, multistage thermonuclear test, number of months from fission bomb to multistage thermonuclear bomb, etc.), and nuclear infrastructure (assembly plants, plutonium production reactors, uranium enrichment plants, etc.). Countries included in the tally are the United States, Soviet Union, Britain, France, and China.

  4. Nuclear power: Fourth edition

    SciTech Connect

    Deutsch, R.W.

    1986-01-01

    This book describes the basics of nuclear power generation, explaining both the benefits and the real and imagined risks of nuclear power. It includes a discussion of the Three Mile Island accident and its effects. Nuclear Power has been used in the public information programs of more than 100 utilities. The contents discussed are: Nuclear Power and People; Why Nuclear Power. Electricity produced by coal; Electricity produced by nuclear fuel; Nuclear plant sites in the United States; Short History of Commercial Nuclear Power; U.S. nuclear submarines, Regulation of Nuclear Power Plants; Licensing process, Nuclear Power Plant Operator Training; Nuclear power plant simulator, Are Nuclear Plants Safe.; Containment structure, Nuclear Power Plant Insurance; Is Radiation Dangerous.; Man-made radiation, What is Nuclear Fuel.; Fuel cycle for commercial nuclear power plants; Warm Water Discharge; Cooling tower; Protection of Radioactive Materials; Plutonium and Proliferation; Disposal of Radioactive Wastes; Are Alternate Energy Sources Available.; Nuclear Opposition; and Nuclear Power in the Future.

  5. Nuclear medicine

    SciTech Connect

    Wagner, H.N. Jr.

    1986-10-17

    In 1985 and 1986 nuclear medicine became more and more oriented toward in vov chemistry, chiefly as a result of advances in positron emission tomography (PET). The most important trend was the extension of PET technology into the care of patients with brain tumors, epilepsy, and heart disease. A second trend was the increasing use of single-photon emission computed tomography (SPECT).

  6. NUCLEAR REACTOR

    DOEpatents

    Treshow, M.

    1961-09-01

    A boiling-water nuclear reactor is described wherein control is effected by varying the moderator-to-fuel ratio in the reactor core. This is accomplished by providing control tubes containing a liquid control moderator in the reactor core and providing means for varying the amount of control moderatcr within the control tubes.

  7. Nuclear Science.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Education, Harrisburg. Bureau of Curriculum Services.

    This document is a report on a course in nuclear science for the high school curriculum. The course is designed to provide a basic but comprehensive understanding of the atom in the light of modern knowledge, and to show how people attempt to harness the tremendous energy liberated through fission and fusion reactions. The course crosses what are…

  8. Nuclear Misinformation

    ERIC Educational Resources Information Center

    Ford, Daniel F.; Kendall, Henry W.

    1975-01-01

    Many scientists feel that research into nuclear safety has been diverted or distorted, and the results of the research concealed or inaccurately reported on a large number of occasions. Of particular concern have been the emergency cooling systems which have not, as yet, been adequately tested. (Author/MA)

  9. Nuclear explosions

    SciTech Connect

    Broyles, A.A.

    1982-07-01

    A summary of the physics of a nuclear bomb explosion and its effects on human beings is presented at the level of a sophomore general physics course without calculus. It is designed to supplement a standard text for such a course and problems are included.

  10. Nuclear energy.

    PubMed

    Wilson, Peter D

    2010-01-01

    The technical principles and practices of the civil nuclear industry are described with particular reference to fission and its products, natural and artificial radioactivity elements principally concerned and their relationships, main types of reactor, safety issues, the fuel cycle, waste management, issues related to weapon proliferation, environmental considerations and possible future developments.

  11. Nuclear Terrorism.

    SciTech Connect

    Hecker, Siegfried S.

    2001-01-01

    As pointed out by several speakers, the level of violence and destruction in terrorist attacks has increased significantly during the past decade. Fortunately, few have involved weapons of mass destruction, and none have achieved mass casualties. The Aum Shinrikyo release of lethal nerve agent, sarin, in the Tokyo subway on March 20, 1995 clearly broke new ground by crossing the threshold in attempting mass casualties with chemical weapons. However, of all weapons of mass destruction, nuclear weapons still represent the most frightening threat to humankind. Nuclear weapons possess an enormous destructive force. The immediacy and scale of destruction are unmatched. In addition to destruction, terrorism also aims to create fear among the public and governments. Here also, nuclear weapons are unmatched. The public's fear of nuclear weapons or, for that matter, of all radioactivity is intense. To some extent, this fear arises from a sense of unlimited vulnerability. That is, radioactivity is seen as unbounded in three dimensions - distance, it is viewed as having unlimited reach; quantity, it is viewed as having deadly consequences in the smallest doses (the public is often told - incorrectly, of course - that one atom of plutonium will kill); and time, if it does not kill you immediately, then it will cause cancer decades hence.

  12. Development of a coal/water-slurry-fueled diesel engine for industrial cogeneration: Task 6. 0 Determination of accurate heat release diagrams and mechanical efficiency

    SciTech Connect

    Nydick, S.E.

    1987-02-01

    Purpose of the program was to foster the long-range development of a coal/water slurry fuel-fired, slow-speed, two-stroke diesel engine for efficient and economical power generation in the 8 to 30 MW range for use in industrial cogeneration applications. This report contains the results of Task 6 of the program, a detailed analysis of heat release diagrams and determination of the mechanical efficiency for a single-cylinder, slow-speed diesel test engine when operated on coal/water slurry and diesel fuels. A digitized technique was utilized to determine the cylinder pressure history. The results of the program showed that the averages of previously reported thermal efficiency values for operation on coal/water slurry fuels were very accurate determinations. In addition, the slight differences in thermal efficiency between diesel and slurry operation are most likely related to changes in the mechanical efficiency resulting from degradation of the piston ring/cylinder liner interface rather than changes in combustion efficiency. Our previous prediction that, at 50% water content, the efficiency of a coal/water slurry engine is comparable to a diesel engine, has been confirmed experimentally and explained analytically.

  13. Development of a coal/water-slurry-fueled diesel engine for industrial cogeneration: Task 4. 0, Single-cylinder engine tests

    SciTech Connect

    Nydick, S.E.

    1986-04-01

    Purpose of the program is to foster the long-range development of a coal/water slurry fuel fired slow-speed, two-stroke diesel engine for efficient and economical power generation in the 8 to 30 MW range for use in industrial cogeneration applications. This report covers the results obtained in Task 4.0, Engine Test, in which four micronized and beneficiated coal/water slurries were utilized as a fuel in a single-cylinder version of the slow-speed, two-stroke diesel engine. Thermal performance, emissions and engine wear are reported on and evaluated in this report, based on the results of the testing program. The results of the program show that the slow-speed, two-stroke diesel engine can operate on coal/water slurry fuels at efficiencies approximately equal to those obtained with conventional liquid fuels and produces considerably lower amounts of exhaust emissions. The engine wear, particularly at the piston ring/cylinder liner interface is considerably greater than that which occurs with liquid fuels. However, it is concluded that by means of technological advances regarding cylinder liner and ring materials, design changes, and new concepts for the lubrication system, a reliable and economical coal/water slurry fired slow-speed engine can be developed.

  14. Novel-structured electrospun TiO2/CuO composite nanofibers for high efficient photocatalytic cogeneration of clean water and energy from dye wastewater.

    PubMed

    Lee, Siew Siang; Bai, Hongwei; Liu, Zhaoyang; Sun, Darren Delai

    2013-08-01

    It is still a challenge to photocatalytically cogenerate clean water and energy from dye wastewater owing to the relatively low photocatalytic efficiency of photocatalysts. In this study, novel-structured TiO2/CuO composite nanofibers were successfully fabricated via facile electrospinning. For the first time, the TiO2/CuO composite nanofibers demonstrated multifunctional ability for concurrent photocatalytic organic degradation and H2 generation from dye wastewater. The enhanced photocatalytic activity of TiO2/CuO composite nanofibers was ascribed to its excellent synergy of physicochemical properties: 1) mesoporosity and large specific surface area for efficient substrate adsorption, mass transfer and light harvesting; 2) red-shift of the absorbance spectra for enhanced light utilization; 3) long nanofibrous structure for efficient charge transfer and ease of recovery, 4) TiO2/CuO heterojunctions which enhance the separation of electrons and holes and 5) presence of CuO which serve as co-catalyst for the H2 production. The TiO2/CuO composite nanofibers also exhibited rapid settleability by gravity and uncompromised reusability. Thus, the as-synthesized TiO2/CuO composite nanofibers represent a promising candidate for highly efficient concurrent photocatalytic organic degradation and clean energy production from dye wastewater.

  15. A Development of the Decision Support System for the Optimum Cogeneration Planning Under the Constraints of the Economic Efficiency and Partial Load Properties for the Commercial Building

    NASA Astrophysics Data System (ADS)

    Ishida, Takeshi; Mori, Shunsuke; Douwaki, Kiyoshi

    It is said that the cogeneration system (CGS) is an effective countermeasure for energy saving and CO2 reduction in the commercial building. However, the economic, energy and environmental efficiency of CGS varies so much depending on the annual load factor and the demand patterns of heat and electric power. In this research, we develop a model to evaluate the optimum decision on the capacity and the operating pattern of CGS by nonlinear mixing integer programming in order to formulate the partial load properties of CGS in practical operation, since the existing optimization models without partial load properties could have generated too optimistic evaluation of CGS. The compatibility between the economy and the energy saving of the CGS implementation planning has been the problem. Our system proposes a new measure to develop an optimal energy saving system under the constraint of economic efficiency as the investment recovery years of CGS for the commercial building. Our system has been applied to the case of hotel building. The results show us that the optimum CGS capacity planning generated by our model provides more effective solution compared to the existing simulation tools used generally without optimization capability.

  16. Implementation plan for operating alternatives for the Naval Computer and Telecommunications Station cogeneration facility at Naval Air Station North Island, San Diego, California

    SciTech Connect

    Carroll, D.M.; Parker, S.A.; Stucky, D.J.

    1994-04-01

    The goal of the US Department of Energy (DOE) Federal Energy Management Program (FEMP) is to facilitate energy efficiency improvements at federal facilities. This is accomplished by a balanced program of technology development, facility assessment, and use of cost-sharing procurement mechanisms. Technology development focuses upon the tools, software, and procedures used to identify and evaluate energy efficiency technologies and improvements. For facility assessment, FEMP provides metering equipment and trained analysts to federal agencies exhibiting a commitment to improve energy use efficiency. To assist in procurement of energy efficiency measures, FEMP helps federal agencies devise and implement performance contracting and utility demand-side management strategies. Pacific Northwest Laboratory (PNL) supports the FEMP mission of energy systems modernization. Under this charter, the Laboratory and its contractors work with federal facility energy managers to assess and implement energy efficiency improvements at federal facilities nationwide. The SouthWestern Division of the Naval Facilities Engineering Command, in cooperation with FEMP, has tasked PNL with developing a plan for implementing recommended modifications to the Naval Computer and Telecommunications Station (NCTS) cogeneration plant at the Naval Air Station North Island (NASNI) in San Diego. That plan is detailed in this report.

  17. Nuclear politics

    NASA Astrophysics Data System (ADS)

    Ranson, John

    2009-04-01

    The sentiments expressed by Sidney Drell in his forum article "The nuclear threat: a new start" (February pp16-17) are laudable, but it was disappointing to find this almost entirely political story in isolation. The article, which outlined the prospects for reducing weapons stockpiles under the new US administration, would have been more pertinent as an introduction to a series describing the technology used in detecting nuclear-testing activity. It would have been interesting to discuss the specific equipment and methods used, together with the analysis and correlation techniques - along with an indication of how sensitive and reliable they are (if the information is not classified). It is far easier to detect an explosive event than it is to detect and quantify weapons stores, which is a key factor for any negotiated solution. Apart from deductions based on actual inspection and satellite surveillance, are there other techniques that can be applied to this issue?

  18. NUCLEAR REACTORS

    DOEpatents

    Long, E.; Ashby, J.W.

    1958-09-16

    ABS>A graphite moderator structure is presented for a nuclear reactor compriscd of an assembly of similarly orientated prismatic graphite blocks arranged on spaced longitudinal axes lying in common planes wherein the planes of the walls of the blocks are positioned so as to be twisted reintive to the planes of said axes so thatthe unlmpeded dtrect paths in direction wholly across the walls of the blocks are limited to the width of the blocks plus spacing between the blocks.

  19. NUCLEAR REACTOR

    DOEpatents

    Anderson, C.R.

    1962-07-24

    A fluidized bed nuclear reactor and a method of operating such a reactor are described. In the design means are provided for flowing a liquid moderator upwardly through the center of a bed of pellets of a nentron-fissionable material at such a rate as to obtain particulate fluidization while constraining the lower pontion of the bed into a conical shape. A smooth circulation of particles rising in the center and falling at the outside of the bed is thereby established. (AEC)

  20. Nuclear Chirality

    SciTech Connect

    Starosta, Krzysztof

    2005-04-05

    Nuclear chirality is a novel manifestation of spontaneous symmetry breaking resulting from an orthogonal coupling of angular momentum vectors in triaxial nuclei. Three perpendicular angular momenta can form two systems of opposite handedness; the time reversal operator, which reverses orientation of each of the angular momentum components, relates these two systems. The status of current experimental searches for chiral doubling of states, as well as recent progress on the theoretical side is reviewed.

  1. Nuclear waste

    SciTech Connect

    Not Available

    1991-09-01

    Radioactive waste is mounting at U.S. nuclear power plants at a rate of more than 2,000 metric tons a year. Pursuant to statute and anticipating that a geologic repository would be available in 1998, the Department of Energy (DOE) entered into disposal contracts with nuclear utilities. Now, however, DOE does not expect the repository to be ready before 2010. For this reason, DOE does not want to develop a facility for monitored retrievable storage (MRS) by 1998. This book is concerned about how best to store the waste until a repository is available, congressional requesters asked GAO to review the alternatives of continued storage at utilities' reactor sites or transferring waste to an MRS facility, GAO assessed the likelihood of an MRSA facility operating by 1998, legal implications if DOE is not able to take delivery of wastes in 1998, propriety of using the Nuclear Waste Fund-from which DOE's waste program costs are paid-to pay utilities for on-site storage capacity added after 1998, ability of utilities to store their waste on-site until a repository is operating, and relative costs and safety of the two storage alternatives.

  2. Nuclear terrorism.

    PubMed

    Hogan, David E; Kellison, Ted

    2002-06-01

    Recent events have heightened awareness of the potential for terrorist attacks employing nonconventional weaponry such as biological agents and radiation. Historically, the philosophy of nuclear risk has focused on global or strategic nuclear exchanges and the resulting damage from large-scale releases. Currently, nuclear accidents or terrorist attacks involving low-level or regional release of radiation are considered the most likely events. Thus far, there have been several regional radiation incidents exposing hundreds of thousands of people to radiation, but there have been only a limited number of significant contaminations resulting in death. There are several different types of radioactive particles that differ in mass, extent of radiation emitted, and the degree to which tissue penetration occurs. Radiation affects its toxicity on biological systems by ionization, which creates tissue damage by the generation of free radicals, disruption of chemical bonds, and directly damaging cellular DNA and enzymes. The extent of damage depends on the type of radioisotope and the radiation dose. Radiation doses exceeding 2 to 10 Gy are considered lethal. Optimal management of radiation casualties requires knowledge of the type and dose of radiation received, a recognition of the manifestations of radiation sickness, and the use of standard medical care, decontamination, and decorporation techniques. PMID:12074488

  3. NUCLEAR REACTOR

    DOEpatents

    Grebe, J.J.

    1959-07-14

    High temperature reactors which are uniquely adapted to serve as the heat source for nuclear pcwered rockets are described. The reactor is comprised essentially of an outer tubular heat resistant casing which provides the main coolant passageway to and away from the reactor core within the casing and in which the working fluid is preferably hydrogen or helium gas which is permitted to vaporize from a liquid storage tank. The reactor core has a generally spherical shape formed entirely of an active material comprised of fissile material and a moderator material which serves as a diluent. The active material is fabricated as a gas permeable porous material and is interlaced in a random manner with very small inter-connecting bores or capillary tubes through which the coolant gas may flow. The entire reactor is divided into successive sections along the direction of the temperature gradient or coolant flow, each section utilizing materials of construction which are most advantageous from a nuclear standpoint and which at the same time can withstand the operating temperature of that particular zone. This design results in a nuclear reactor characterized simultaneously by a minimum critiral size and mass and by the ability to heat a working fluid to an extremely high temperature.

  4. Nuclear photonics

    SciTech Connect

    Habs, D.; Guenther, M. M.; Jentschel, M.; Thirolf, P. G.

    2012-07-09

    With the planned new {gamma}-beam facilities like MEGa-ray at LLNL (USA) or ELI-NP at Bucharest (Romania) with 10{sup 13}{gamma}/s and a band width of {Delta}E{gamma}/E{gamma} Almost-Equal-To 10{sup -3}, a new era of {gamma} beams with energies up to 20MeV comes into operation, compared to the present world-leading HI{gamma}S facility at Duke University (USA) with 10{sup 8}{gamma}/s and {Delta}E{gamma}/E{gamma} Almost-Equal-To 3 Dot-Operator 10{sup -2}. In the long run even a seeded quantum FEL for {gamma} beams may become possible, with much higher brilliance and spectral flux. At the same time new exciting possibilities open up for focused {gamma} beams. Here we describe a new experiment at the {gamma} beam of the ILL reactor (Grenoble, France), where we observed for the first time that the index of refraction for {gamma} beams is determined by virtual pair creation. Using a combination of refractive and reflective optics, efficient monochromators for {gamma} beams are being developed. Thus, we have to optimize the total system: the {gamma}-beam facility, the {gamma}-beam optics and {gamma} detectors. We can trade {gamma} intensity for band width, going down to {Delta}E{gamma}/E{gamma} Almost-Equal-To 10{sup -6} and address individual nuclear levels. The term 'nuclear photonics' stresses the importance of nuclear applications. We can address with {gamma}-beams individual nuclear isotopes and not just elements like with X-ray beams. Compared to X rays, {gamma} beams can penetrate much deeper into big samples like radioactive waste barrels, motors or batteries. We can perform tomography and microscopy studies by focusing down to {mu}m resolution using Nuclear Resonance Fluorescence (NRF) for detection with eV resolution and high spatial resolution at the same time. We discuss the dominating M1 and E1 excitations like the scissors mode, two-phonon quadrupole octupole excitations, pygmy dipole excitations or giant dipole excitations under the new facet of

  5. Nuclear photonics

    NASA Astrophysics Data System (ADS)

    Habs, D.; Günther, M. M.; Jentschel, M.; Thirolf, P. G.

    2012-07-01

    With the planned new γ-beam facilities like MEGa-ray at LLNL (USA) or ELI-NP at Bucharest (Romania) with 1013 γ/s and a band width of ΔEγ/Eγ≈10-3, a new era of γ beams with energies up to 20MeV comes into operation, compared to the present world-leading HIγS facility at Duke University (USA) with 108 γ/s and ΔEγ/Eγ≈3ṡ10-2. In the long run even a seeded quantum FEL for γ beams may become possible, with much higher brilliance and spectral flux. At the same time new exciting possibilities open up for focused γ beams. Here we describe a new experiment at the γ beam of the ILL reactor (Grenoble, France), where we observed for the first time that the index of refraction for γ beams is determined by virtual pair creation. Using a combination of refractive and reflective optics, efficient monochromators for γ beams are being developed. Thus, we have to optimize the total system: the γ-beam facility, the γ-beam optics and γ detectors. We can trade γ intensity for band width, going down to ΔEγ/Eγ≈10-6 and address individual nuclear levels. The term "nuclear photonics" stresses the importance of nuclear applications. We can address with γ-beams individual nuclear isotopes and not just elements like with X-ray beams. Compared to X rays, γ beams can penetrate much deeper into big samples like radioactive waste barrels, motors or batteries. We can perform tomography and microscopy studies by focusing down to μm resolution using Nuclear Resonance Fluorescence (NRF) for detection with eV resolution and high spatial resolution at the same time. We discuss the dominating M1 and E1 excitations like the scissors mode, two-phonon quadrupole octupole excitations, pygmy dipole excitations or giant dipole excitations under the new facet of applications. We find many new applications in biomedicine, green energy, radioactive waste management or homeland security. Also more brilliant secondary beams of neutrons and positrons can be produced.

  6. 46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ENGINEERING VITAL SYSTEM AUTOMATION General Requirements for All Automated Vital Systems § 62.25-20... there is no off position. (5) Automation alarms must be separate and independent of the following:...

  7. 46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ENGINEERING VITAL SYSTEM AUTOMATION General Requirements for All Automated Vital Systems § 62.25-20...) Automation alarms must be separate and independent of the following: (i) The fire detection and alarm...

  8. 46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ENGINEERING VITAL SYSTEM AUTOMATION General Requirements for All Automated Vital Systems § 62.25-20... there is no off position. (5) Automation alarms must be separate and independent of the following:...

  9. Engineering and economic evaluation of central-station photovoltaic power plants

    SciTech Connect

    Stolte, W.J. )

    1992-12-01

    This report describes the conceptual design, design optimization, and estimated cost and performance of three 50 MW photovoltaic power plants. The first design uses Fresnel lens/glass silo modules mounted on two-axis tracking arrays. The second design has all of the cells mounted on a central receiver on top of a single tower, with heliostats concentrating sunlight onto the receiver. Both designs are based on a similar advanced back-contact silicon concentrator cell developed under EPRI sponsorship. The third design uses thin-film copper indium diselenide flat-plate modules mounted on fixed-tilt array structures. The design and manufacture of the photovoltaic cells and modules are described, along with selection of the photovoltaic technologies, generating and cell manufacturing plant sites. Power system simulation and revenue requirement analyses are included for all of the plant designs.

  10. 46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... alarms in high ambient noise areas must be supplemented by visual means, such as rotating beacons, that are visible throughout these areas. Red beacons must only be used for general or fire alarm...

  11. 46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... alarms in high ambient noise areas must be supplemented by visual means, such as rotating beacons, that are visible throughout these areas. Red beacons must only be used for general or fire alarm...

  12. The Nuclear Power and Nuclear Weapons Connection.

    ERIC Educational Resources Information Center

    Leventhal, Paul

    1990-01-01

    Explains problems enforcing the Nuclear Non-Proliferation Treaty (NPT) of 1968. Provides factual charts and details concerning the production of nuclear energy and arms, the processing and disposal of waste products, and outlines the nuclear fuel cycle. Discusses safeguards, the risk of nuclear terrorism, and ways to deal with these problems. (NL)

  13. The nuclear arsenals and nuclear disarmament.

    PubMed

    Barnaby, F

    1998-01-01

    Current world stockpiles of nuclear weapons and the status of treaties for nuclear disarmament and the ultimate elimination of nuclear weapons are summarised. The need for including stockpiles of civil plutonium in a programme for ending production and disposing of fissile materials is emphasized, and the ultimate difficulty of disposing of the last few nuclear weapons discussed.

  14. The Nuclear Power/Nuclear Weapons Connection.

    ERIC Educational Resources Information Center

    Totten, Sam; Totten, Martha Wescoat

    1985-01-01

    Once they have nuclear power, most countries will divert nuclear materials from commercial to military programs. In excerpts from the book "Facing the Danger" (by Totten, S. and M. W., Crossing Press, 1984), five anti-nuclear activists explain how and why they have been addressing the nuclear connection. (RM)

  15. Nuclear security

    SciTech Connect

    Dingell, J.D.

    1991-02-01

    The Department of Energy's (DOE) Lawrence Livermore National Laboratory, located in Livermore, California, generates and controls large numbers of classified documents associated with the research and testing of nuclear weapons. Concern has been raised about the potential for espionage at the laboratory and the national security implications of classified documents being stolen. This paper determines the extent of missing classified documents at the laboratory and assesses the adequacy of accountability over classified documents in the laboratory's custody. Audit coverage was limited to the approximately 600,000 secret documents in the laboratory's custody. The adequacy of DOE's oversight of the laboratory's secret document control program was also assessed.

  16. NUCLEAR REACTOR

    DOEpatents

    Young, G.

    1963-01-01

    This patent covers a power-producing nuclear reactor in which fuel rods of slightly enriched U are moderated by heavy water and cooled by liquid metal. The fuel rods arranged parallel to one another in a circle are contained in a large outer closed-end conduit that extends into a tank containing the heavy water. Liquid metal is introduced into the large conduit by a small inner conduit that extends within the circle of fuel rods to a point near the lower closed end of the outer conduit. (AEC) Production Reactors

  17. Nuclear energy.

    PubMed

    Grandin, Karl; Jagers, Peter; Kullander, Sven

    2010-01-01

    Nuclear energy can play a role in carbon free production of electrical energy, thus making it interesting for tomorrow's energy mix. However, several issues have to be addressed. In fission technology, the design of so-called fourth generation reactors show great promise, in particular in addressing materials efficiency and safety issues. If successfully developed, such reactors may have an important and sustainable part in future energy production. Working fusion reactors may be even more materials efficient and environmental friendly, but also need more development and research. The roadmap for development of fourth generation fission and fusion reactors, therefore, asks for attention and research in these fields must be strengthened.

  18. Nuclear energy.

    PubMed

    Grandin, Karl; Jagers, Peter; Kullander, Sven

    2010-01-01

    Nuclear energy can play a role in carbon free production of electrical energy, thus making it interesting for tomorrow's energy mix. However, several issues have to be addressed. In fission technology, the design of so-called fourth generation reactors show great promise, in particular in addressing materials efficiency and safety issues. If successfully developed, such reactors may have an important and sustainable part in future energy production. Working fusion reactors may be even more materials efficient and environmental friendly, but also need more development and research. The roadmap for development of fourth generation fission and fusion reactors, therefore, asks for attention and research in these fields must be strengthened. PMID:20873683

  19. NUCLEAR REACTORS

    DOEpatents

    Long, E.; Ashley, J.W.

    1958-12-16

    A graphite moderator structure is described for a gas-cooled nuclear reactor having a vertical orlentation wherein the structure is physically stable with regard to dlmensional changes due to Wigner growth properties of the graphite, and leakage of coolant gas along spaces in the structure is reduced. The structure is comprised of stacks of unlform right prismatic graphite blocks positioned in layers extending in the direction of the lengths of the blocks, the adjacent end faces of the blocks being separated by pairs of tiles. The blocks and tiles have central bores which are in alignment when assembled and are provided with cooperatlng keys and keyways for physical stability.

  20. Dictionary of nuclear engineering

    SciTech Connect

    Sube, R.

    1985-01-01

    Ralf Sube, an experienced compiler of three wellknown four-language reference works has now prepared this glossary of nuclear engineering terms in English, German, French and Russian. Based on the proven lexicography of the Technik-Worterbuch series, it comprises about 30,000 terms in each language covering the following: Nuclear and Atomic Physics; Nuclear Radiation and Isotopes; Nuclear Materials; Nuclear Facilties; Nuclear Power Industry; Nuclear Weapons.

  1. Design and evaluation of a low nitrogen oxides natural gas-fired conical wire-mesh duct burner for a micro-cogeneration unit

    NASA Astrophysics Data System (ADS)

    Ramadan, Omar Barka Ab

    A novel low NOx conical wire-mesh duct burner was designed, built and tested in the present research. This thesis documents the design process and the in-depth evaluation of this novel duct burner for the development of a more efficient micro-cogeneration unit. This duct burner provides the thermal energy necessary to raise the microturbine exhaust gases temperature to increase the heat recovery capability. The duct burner implements both lean-premixed and surface combustion techniques to achieve low NOx and CO emissions. The design of the duct burner was supported by a qualitative flow visualization study for the duct burner premixer to provide insight into the premixer flow field (mixing process). Different premixer geometries were used to control the homogeneity of the fuel-oxidant mixture at the exit of the duct burner premixer. Laser sheet illumination (LSI) technique was used to capture images of the mixing process, for each configuration studied. A quasi-quantitative analysis technique was developed to rank the different premixer geometries in terms of mixing effectiveness. The premixer geometries that provided better mixing were selected and used for the combustion tests. The full-scale gas-fired duct burner was installed in the exhaust duct of a micro-cogeneration unit for the evaluation. Three wire-mesh burners with different pressure drops were used. Each burner has a conical shape made from FeCrAL alloy mat and was designed based on a heat release per unit area of 2500 kW/m2 and a total heat release of 240kW at 100 percent excess air. The local momentum of the gaseous mixture introduced through the wire-mesh was adjusted so that the flame stabilized outside the burner mesh (surface combustion). Cold flow tests (i.e., the duct burner was off, but the microturbine was running) were conducted to measure the effect of different duct burner geometrical parameters on flow split between the combustion zone and the bypass channel, and on pressure drop across

  2. Results of heat tests of the TGE-435 main boiler in the PGU-190/220 combined-cycle plant of the Tyumen' TETs-2 cogeneration plant

    SciTech Connect

    A.V. Kurochkin; A.L. Kovalenko; V.G. Kozlov; A.I. Krivobok

    2007-01-15

    Special features of operation of a boiler operating as a combined-cycle plant and having its own furnace and burner unit are descried. The flow of flue gases on the boiler is increased due to feeding of exhaust gases of the GTU into the furnace, which intensifies the convective heat exchange. In addition, it is not necessary to preheat air in the convective heating surfaces (the boiler has no air preheater). The convective heating surfaces of the boiler are used for heating the feed water, thus replacing the regeneration extractions of the steam turbine (HPP are absent in the circuit) and partially replacing the preheating of condensate (the LPP in the circuit of the unit are combined with preheaters of delivery water). Regeneration of the steam turbine is primarily used for the district cogeneration heating purposes. The furnace and burner unit of the exhaust-heat boiler (which is a new engineering solution for the given project) ensures utilization of not only the heat of the exhaust gases of the GTU but also of their excess volume, because the latter contains up to 15% oxygen that oxidizes the combustion process in the boiler. Thus, the gas temperature at the inlet to the boiler amounts to 580{sup o}C at an excess air factor a = 3.50; at the outlet these parameters are utilized to T{sub out} = 139{sup o}C and a{sub out} = 1.17. The proportions of the GTU/boiler loads that can actually be organized at the generating unit (and have been checked by testing) are presented and the proportions of loads recommended for the most efficient operation of the boiler are determined. The performance characteristics of the boiler are presented for various proportions of GTU/boiler loads. The operating conditions of the superheater and of the convective trailing heating surfaces are presented as well as the ecological parameters of the generating unit.

  3. Nuclear "waffles"

    NASA Astrophysics Data System (ADS)

    Schneider, A. S.; Berry, D. K.; Briggs, C. M.; Caplan, M. E.; Horowitz, C. J.

    2014-11-01

    Background: The dense neutron-rich matter found in supernovae and inside neutron stars is expected to form complex nonuniform phases, often referred to as nuclear pasta. The pasta shapes depend on density, temperature and proton fraction and determine many transport properties in supernovae and neutron star crusts. Purpose: To characterize the topology and compute two observables, the radial distribution function (RDF) g (r ) and the structure factor S (q ) , for systems with proton fractions Yp=0.10 ,0.20 ,0.30 , and 0.40 at about one-third of nuclear saturation density, n =0.050 fm-3 , and temperatures near k T =1 MeV . Methods: We use two recently developed hybrid CPU/GPU codes to perform large scale molecular dynamics (MD) simulations with 51 200 and 409 600 nucleons. From the output of the MD simulations we obtain the two desired observables. Results: We compute and discuss the differences in topology and observables for each simulation. We observe that the two lowest proton fraction systems simulated, Yp=0.10 and 0.20 , equilibrate quickly and form liquidlike structures. Meanwhile, the two higher proton fraction systems, Yp=0.30 and 0.40 , take a longer time to equilibrate and organize themselves in solidlike periodic structures. Furthermore, the Yp=0.40 system is made up of slabs, lasagna phase, interconnected by defects while the Yp=0.30 systems consist of a stack of perforated plates, the nuclear waffle phase. Conclusions: The periodic configurations observed in our MD simulations for proton fractions Yp≥0.30 have important consequences for the structure factors S (q ) of protons and neutrons, which relate to many transport properties of supernovae and neutron star crust. A detailed study of the waffle phase and how its structure depends on temperature, size of the simulation, and the screening length showed that finite-size effects appear to be under control and, also, that the plates in the waffle phase merge at temperatures slightly above 1.0 MeV and

  4. Nuclear Fusion

    NASA Astrophysics Data System (ADS)

    Veres, G.

    This chapter is devoted to the fundamental concepts of nuclear fusion. To be more precise, it is devoted to the theoretical basics of fusion reactions between light nuclei such as hydrogen, helium, boron, and lithium. The discussion is limited because our purpose is to focus on laboratory-scale fusion experiments that aim at gaining energy from the fusion process. After discussing the methods of calculating the fusion cross section, it will be shown that sustained fusion reactions with energy gain must happen in a thermal medium because, in beam-target experiments, the energy of the beam is randomized faster than the fusion rate. Following a brief introduction to the elements of plasma physics, the chapter is concluded with the introduction of the most prominent fusion reactions ongoing in the Sun.

  5. NUCLEAR REACTOR

    DOEpatents

    Grebe, J.J.

    1959-12-15

    A reactor which is particularly adapted tu serve as a heat source for a nuclear powered alrcraft or rocket is described. The core of this reactor consists of a porous refractory modera;or body which is impregnated with fissionable nuclei. The core is designed so that its surface forms tapered inlet and outlet ducts which are separated by the porous moderator body. In operation a gaseous working fluid is circulated through the inlet ducts to the surface of the moderator, enters and passes through the porous body, and is heated therein. The hot gas emerges into the outlet ducts and is available to provide thrust. The principle advantage is that tremendous quantities of gas can be quickly heated without suffering an excessive pressure drop.

  6. NUCLEAR REACTOR

    DOEpatents

    Christy, R.F.

    1958-07-15

    A nuclear reactor of the homogeneous liquid fuel type is described wherein the fissionable isotope is suspended or dissolved in a liquid moderator such as water. The reactor core is comprised essentially of a spherical vessel for containing the reactive composition surrounded by a reflector, preferably of beryllium oxide. The reactive composition may be an ordinary water solution of a soluble salt of uranium, the quantity of fissionable isotope in solution being sufficient to provide a critical mass in the vessel. The liquid fuel is stored in a tank of non-crtttcal geometry below the reactor vessel and outside of the reflector and is passed from the tank to the vessel through a pipe connecting the two by air pressure means. Neutron absorbing control and safety rods are operated within slots in the reflector adjacent to the vessel.

  7. NUCLEAR REACTOR

    DOEpatents

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  8. Nuclear reactor

    DOEpatents

    Wade, Elman E.

    1979-01-01

    A nuclear reactor including two rotatable plugs and a positive top core holddown structure. The top core holddown structure is divided into two parts: a small core cover, and a large core cover. The small core cover, and the upper internals associated therewith, are attached to the small rotating plug, and the large core cover, with its associated upper internals, is attached to the large rotating plug. By so splitting the core holddown structures, under-the-plug refueling is accomplished without the necessity of enlarging the reactor pressure vessel to provide a storage space for the core holddown structure during refueling. Additionally, the small and large rotating plugs, and their associated core covers, are arranged such that the separation of the two core covers to permit rotation is accomplished without the installation of complex lifting mechanisms.

  9. Nuclear exoticism

    NASA Astrophysics Data System (ADS)

    Penionzhkevich, Yu. E.

    2016-07-01

    Extreme states of nuclearmatter (such that feature high spins, large deformations, high density and temperature, or a large excess of neutrons and protons) play an important role in studying fundamental properties of nuclei and are helpful in solving the problem of constructing the equation of state for nuclear matter. The synthesis of neutron-rich nuclei near the nucleon drip lines and investigation of their properties permit drawing conclusions about the positions of these boundaries and deducing information about unusual states of such nuclei and about their decays. At the present time, experimental investigations along these lines can only be performed via the cooperation of leading research centers that possess powerful heavy-ion accelerators, such as the Large Hadron Collider (LHC) at CERN and the heavy-ion cyclotrons at the Joint Institute for Nuclear Research (JINR, Dubna), where respective experiments are being conducted by physicists from about 20 JINR member countries. The present article gives a survey of the most recent results in the realms of super neutron-rich nuclei. Implications of the change in the structure of such nuclei near the nucleon drip lines are discussed. Information about the results obtained by measuring the masses (binding energies) of exotic nuclei, the nucleon-distribution radii (neutron halo) and momentum distributions in them, and their deformations and quantum properties is presented. It is shown that the properties of nuclei lying near the stability boundaries differ strongly from the properties of other nuclei. The problem of the stability of nuclei that is associated with the magic numbers of 20 and 28 is discussed along with the effect of new magic numbers.

  10. Nuclear war: Opposing viewpoints

    SciTech Connect

    Szumski, B.

    1985-01-01

    This book presents opposing viewpoints on nuclear war. Topics discussed include: how nuclear would begin; would humanity survive; would civil defense work; will an arms agreement work; and can space weapons reduce the risk of nuclear war.

  11. Nuclear analytical chemistry

    SciTech Connect

    Brune, D.; Forkman, B.; Persson, B.

    1984-01-01

    This book covers the general theories and techniques of nuclear chemical analysis, directed at applications in analytical chemistry, nuclear medicine, radiophysics, agriculture, environmental sciences, geological exploration, industrial process control, etc. The main principles of nuclear physics and nuclear detection on which the analysis is based are briefly outlined. An attempt is made to emphasise the fundamentals of activation analysis, detection and activation methods, as well as their applications. The book provides guidance in analytical chemistry, agriculture, environmental and biomedical sciences, etc. The contents include: the nuclear periodic system; nuclear decay; nuclear reactions; nuclear radiation sources; interaction of radiation with matter; principles of radiation detectors; nuclear electronics; statistical methods and spectral analysis; methods of radiation detection; neutron activation analysis; charged particle activation analysis; photon activation analysis; sample preparation and chemical separation; nuclear chemical analysis in biological and medical research; the use of nuclear chemical analysis in the field of criminology; nuclear chemical analysis in environmental sciences, geology and mineral exploration; and radiation protection.

  12. Nuclear Quadrupole Moments and Nuclear Shell Structure

    DOE R&D Accomplishments Database

    Townes, C. H.; Foley, H. M.; Low, W.

    1950-06-23

    Describes a simple model, based on nuclear shell considerations, which leads to the proper behavior of known nuclear quadrupole moments, although predictions of the magnitudes of some quadrupole moments are seriously in error.

  13. Nuclear thermal/nuclear electric hybrids

    NASA Technical Reports Server (NTRS)

    Reid, B. D.

    1991-01-01

    A description is given of the nuclear thermal and nuclear electric hybrid. The specifications are described along with its mission performance. Next, the technical status, development requirements, and some cost estimates are provided.

  14. Nuclear Fuel Cycle & Vulnerabilities

    SciTech Connect

    Boyer, Brian D.

    2012-06-18

    The objective of safeguards is the timely detection of diversion of significant quantities of nuclear material from peaceful nuclear activities to the manufacture of nuclear weapons or of other nuclear explosive devices or for purposes unknown, and deterrence of such diversion by the risk of early detection. The safeguards system should be designed to provide credible assurances that there has been no diversion of declared nuclear material and no undeclared nuclear material and activities.

  15. Emerging policy issues in PURPA implementation: an examination of policy issues related to federal and state efforts to encourage development of cogeneration and small power production under Title II of PURPA

    SciTech Connect

    Not Available

    1986-03-01

    Purpose of this study is to examine the results of FERG and state efforts to encourage the development of cogeneration and small power production under Title II of the Public Utility Regualtory Policies Act of 1978 (PURPA) in the years since the statute was enacted. The frame of reference specified by DOE for use in this study includes both the original purposes of the legislation as set forth in PURPA and the current overall energy policy goal which is to ''foster an adequate supply of energy at reasonable costs.'' This review of PURPA implementation efforts is designed to assess the results to date in terms of achieving the stated goals of the statute (including ''to encourage cogeneration and small power production''), identify perceived areas of conflict between federal and state efforts to maximize development of qualifying facilities (QFs) and current Administration concerns for achieving greater levels of economic efficiency in electric power supply, briefly examine the nature of such conflicts, with reference to specific cases wherever possible, and suggest possible means of conforming government efforts to encourage QF development with the economic efficiency objectives underlying national energy policy.

  16. Nuclear weapons modernizations

    NASA Astrophysics Data System (ADS)

    Kristensen, Hans M.

    2014-05-01

    This article reviews the nuclear weapons modernization programs underway in the world's nine nuclear weapons states. It concludes that despite significant reductions in overall weapons inventories since the end of the Cold War, the pace of reductions is slowing - four of the nuclear weapons states are even increasing their arsenals, and all the nuclear weapons states are busy modernizing their remaining arsenals in what appears to be a dynamic and counterproductive nuclear competition. The author questions whether perpetual modernization combined with no specific plan for the elimination of nuclear weapons is consistent with the nuclear Non-Proliferation Treaty and concludes that new limits on nuclear modernizations are needed.

  17. Nuclear weapons modernizations

    SciTech Connect

    Kristensen, Hans M.

    2014-05-09

    This article reviews the nuclear weapons modernization programs underway in the world's nine nuclear weapons states. It concludes that despite significant reductions in overall weapons inventories since the end of the Cold War, the pace of reductions is slowing - four of the nuclear weapons states are even increasing their arsenals, and all the nuclear weapons states are busy modernizing their remaining arsenals in what appears to be a dynamic and counterproductive nuclear competition. The author questions whether perpetual modernization combined with no specific plan for the elimination of nuclear weapons is consistent with the nuclear Non-Proliferation Treaty and concludes that new limits on nuclear modernizations are needed.

  18. Nuclear reactor

    DOEpatents

    Thomson, Wallace B.

    2004-03-16

    A nuclear reactor comprising a cylindrical pressure vessel, an elongated annular core centrally disposed within and spaced from the pressure vessel, and a plurality of ducts disposed longitudinally of the pressure vessel about the periphery thereof, said core comprising an annular active portion, an annular reflector just inside the active portion, and an annular reflector just outside the active a portion, said annular active portion comprising rectangular slab, porous fuel elements radially disposed around the inner reflector and extending the length of the active portion, wedge-shaped, porous moderator elements disposed adjacent one face of each fuel element and extending the length of the fuel element, the fuel and moderator elements being oriented so that the fuel elements face each other and the moderator elements do likewise, adjacent moderator elements being spaced to provide air inlet channels, and adjacent fuel elements being spaced to provide air outlet channels which communicate with the interior of the peripheral ducts, and means for introducing air into the air inlet channels which passes through the porous moderator elements and porous fuel elements to the outlet channel.

  19. The Arabidopsis Nuclear Pore and Nuclear Envelope

    PubMed Central

    Meier, Iris; Brkljacic, Jelena

    2010-01-01

    The nuclear envelope is a double membrane structure that separates the eukaryotic cytoplasm from the nucleoplasm. The nuclear pores embedded in the nuclear envelope are the sole gateways for macromolecular trafficking in and out of the nucleus. The nuclear pore complexes assembled at the nuclear pores are large protein conglomerates composed of multiple units of about 30 different nucleoporins. Proteins and RNAs traffic through the nuclear pore complexes, enabled by the interacting activities of nuclear transport receptors, nucleoporins, and elements of the Ran GTPase cycle. In addition to directional and possibly selective protein and RNA nuclear import and export, the nuclear pore gains increasing prominence as a spatial organizer of cellular processes, such as sumoylation and desumoylation. Individual nucleoporins and whole nuclear pore subcomplexes traffic to specific mitotic locations and have mitotic functions, for example at the kinetochores, in spindle assembly, and in conjunction with the checkpoints. Mutants of nucleoporin genes and genes of nuclear transport components lead to a wide array of defects from human diseases to compromised plant defense responses. The nuclear envelope acts as a repository of calcium, and its inner membrane is populated by functionally unique proteins connected to both chromatin and—through the nuclear envelope lumen—the cytoplasmic cytoskeleton. Plant nuclear pore and nuclear envelope research—predominantly focusing on Arabidopsis as a model—is discovering both similarities and surprisingly unique aspects compared to the more mature model systems. This chapter gives an overview of our current knowledge in the field and of exciting areas awaiting further exploration. PMID:22303264

  20. Nuclear reactor

    DOEpatents

    Pennell, William E.; Rowan, William J.

    1977-01-01

    A nuclear reactor in which the core components, including fuel-rod assemblies, control-rod assemblies, fertile rod-assemblies, and removable shielding assemblies, are supported by a plurality of separate inlet modular units. These units are referred to as inlet module units to distinguish them from the modules of the upper internals of the reactor. The modular units are supported, each removable independently of the others, in liners in the supporting structure for the lower internals of the reactor. The core assemblies are removably supported in integral receptacles or sockets of the modular units. The liners, units, sockets and assmblies have inlet openings for entry of the fluid. The modular units are each removably mounted in the liners with fluid seals interposed between the opening in the liner and inlet module into which the fluid enters and the upper and lower portion of the liner. Each assembly is similarly mounted in a corresponding receptacle with fluid seals interposed between the openings where the fluid enters and the lower portion of the receptacle or fitting closely in these regions. As fluid flows along each core assembly a pressure drop is produced along the fluid so that the fluid which emerges from each core assembly is at a lower pressure than the fluid which enters the core assembly. However because of the seals interposed in the mountings of the units and assemblies the pressures above and below the units and assemblies are balanced and the units are held in the liners and the assemblies are held in the receptacles by their weights as they have a higher specific gravity than the fluid. The low-pressure spaces between each module and its liner and between each core assembly and its module is vented to the low-pressure regions of the vessel to assure that fluid which leaks through the seals does not accumulate and destroy the hydraulic balance.

  1. Nuclear reactor

    DOEpatents

    Yant, Howard W.; Stinebiser, Karl W.; Anzur, Gregory C.

    1977-01-01

    A nuclear reactor, particularly a liquid-metal breeder reactor, whose upper internals include outlet modules for channeling the liquid-metal coolant from selected areas of the outlet of the core vertically to the outlet plenum. The modules are composed of a highly-refractory, high corrosion-resistant alloy, for example, INCONEL-718. Each module is disposed to confine and channel generally vertically the coolant emitted from a subplurality of core-component assemblies. Each module has a grid with openings, each opening disposed to receive the coolant from an assembly of the subplurality. The grid in addition serves as a holdown for the assemblies of the corresponding subplurality preventing their excessive ejection upwardly from the core. In the region directly over the core the outlet modules are of such peripheral form that they nest forming a continuum over the core-component assemblies whose outlet coolant they confine. Each subassembly includes a chimney which confines the coolant emitted by its corresponding subassemblies to generally vertical flow between the outlet of the core and the outlet plenum. Each subplurality of assemblies whose emitted coolant is confined by an outlet module includes assemblies which emit lower-temperature coolant, for example, a control-rod assembly, or fertile assemblies, and assemblies which emit coolant of substantially higher temperature, for example, fuel-rod assemblies. The coolants of different temperatures are mixed in the chimneys reducing the effect of stripping (hot-cold temperature fluctuations) on the remainder of the upper internals which are composed typically of AISI-304 or AISI-316 stainless steel.

  2. The New Nuclear Nations.

    ERIC Educational Resources Information Center

    Spector, Leonard S.

    1990-01-01

    Explores the issue of nuclear proliferation, noting that the countries with nuclear capability now include Israel, South Africa, India, and Pakistan. Describes the role and problems of the United States in halting nuclearization. Supplies charts, maps, and information concerning the state of nuclear capability in each country. (NL)

  3. Nuclear medicine annual, 1984

    SciTech Connect

    Freeman, L.M.; Weissmann, H.S.

    1984-01-01

    The following topics are reviewed in this work: nuclear physicians role in planning for and handling radiation accidents; the role of nuclear medicine in evaluating the hypertensive patient; studies of the heart with radionuclides; role of radionuclide imaging in the patient undergoing chemotherapy; hematologic nuclear medicine; the role of nuclear medicine in sports related injuries; radionuclide evaluation of hepatic function with emphasis on cholestatis.

  4. Terrorists and Nuclear Technology

    ERIC Educational Resources Information Center

    Krieger, David

    1975-01-01

    This essay explores the ways terrorist groups may gain possession of nuclear materials; the way in which they may use nuclear weapons and other nuclear technologies to their benefit; and various courses of action designed to minimize the possibilities of terrorists utilizing nuclear technology to their benefit and society's detriment. (BT)

  5. Nuclear Reaction Data Centers

    SciTech Connect

    McLane, V.; Nordborg, C.; Lemmel, H.D.; Manokhin, V.N.

    1988-01-01

    The cooperating Nuclear Reaction Data Centers are involved in the compilation and exchange of nuclear reaction data for incident neutrons, charged particles and photons. Individual centers may also have services in other areas, e.g., evaluated data, nuclear structure and decay data, reactor physics, nuclear safety; some of this information may also be exchanged between interested centers. 20 refs., 1 tab.

  6. Nuclear air cushion vehicles

    NASA Technical Reports Server (NTRS)

    Anderson, J. L.

    1973-01-01

    The state-of-the-art of the still-conceptual nuclear air cushion vehicle, particularly the nuclear powerplant is identified. Using mission studies and cost estimates, some of the advantages of nuclear power for large air cushion vehicles are described. The technology studies on mobile nuclear powerplants and conceptual ACV systems/missions studies are summarized.

  7. Frontiers of Nuclear Structure

    SciTech Connect

    Nazarewicz, Witold

    1997-12-31

    Current developments in nuclear structure at the `limits` are discussed. The studies of nuclear behavior at extreme conditions provide us with invaluable information about the nature of the nuclear interaction and nucleonic correlations at various energy-distance scales. In this talk frontiers of nuclear structure are briefly reviewed from a theoretical perspective, mainly concentrating on medium-mass and heavy nuclei.

  8. [Chilean nuclear policy].

    PubMed

    Bobadilla, E

    1996-06-01

    This official document is statement of the President of the Chilean Nuclear Energy Commission, Dr. Eduardo Bobadilla, about the nuclear policy of the Chilean State, Thanks to the international policy adopted by presidents Aylwin (1990-1994) and his successor Frei Ruiz Tagle (1994-), a nuclear development plan, protected by the Chilean entrance to the nuclear weapons non proliferation treaty and Tlatelolco Denuclearization treaty, has started. Chile will be able to develop without interference, an autonomous nuclear electrical system and other pacific uses of nuclear energy. Chile also supports a new international treaty to ban nuclear weapon tests.

  9. Intergenerational issues regarding nuclear power, nuclear waste, and nuclear weapons.

    PubMed

    Ahearne, J F

    2000-12-01

    Nuclear power, nuclear waste, and nuclear weapons raise substantial public concern in many countries. While new support for nuclear power can be found in arguments concerning greenhouse gases and global warming, the long-term existence of radioactive waste has led to requirements for 10,000-year isolation. Some of the support for such requirements is based on intergenerational equity arguments. This, however, places a very high value on lives far in the future. An alternative is to use discounting, as is applied to other resource applications. Nuclear weapons, even though being dismantled by the major nations, are growing in number due to the increase in the number of countries possessing these weapons of mass destruction. This is an unfortunate legacy for future generations. PMID:11314726

  10. Nuclear Structure Aspects in Nuclear Astrophysics

    SciTech Connect

    Smith, Michael Scott

    2006-12-01

    Nuclear Astrophysics as a broad and diverse field of study can be viewed as a magnifier of the impact of microscopic processes on the evolution of macroscopic events. One of the primary goals in Nuclear Astrophysics is the understanding of the nucleosynthesis processes that take place in the cosmos and the simulation of the correlated stellar and explosive burning scenarios. These simulations are strongly dependent on the input from Nuclear Physics which sets the time scale for all stellar dynamic processes--from giga-years of stellar evolution to milliseconds of stellar explosions--and provides the basis for most of the signatures that we have for the interpretation of these events--from stellar luminosities, elemental and isotopic abundances to neutrino flux from distant supernovae. The Nuclear Physics input comes through nuclear structure, low energy reaction rates, nuclear masses, and decay rates. There is a common perception that low energy reaction rates are the most important component of the required nuclear physics input; however, in this article we take a broader approach and present an overview of the close correlation between various nuclear structure aspects and their impact on nuclear astrophysics. We discuss the interplay between the weak and the strong forces on stellar time scales due to the limitations they provide for the evolution of slow and rapid burning processes. The effects of shell structure in nuclei on stellar burning processes as well as the impact of clustering in nuclei is outlined. Furthermore we illustrate the effects of the various nuclear structure aspects on the major nucleosynthesis processes that have been identified in the last few decades. We summarize and provide a coherent overview of the impact of all aspects of nuclear structure on nuclear astrophysics.

  11. Biogenesis of nuclear bodies.

    PubMed

    Dundr, Miroslav; Misteli, Tom

    2010-12-01

    The nucleus is unique amongst cellular organelles in that it contains a myriad of discrete suborganelles. These nuclear bodies are morphologically and molecularly distinct entities, and they host specific nuclear processes. Although the mode of biogenesis appears to differ widely between individual nuclear bodies, several common design principles are emerging, particularly, the ability of nuclear bodies to form de novo, a role of RNA as a structural element and self-organization as a mode of formation. The controlled biogenesis of nuclear bodies is essential for faithful maintenance of nuclear architecture during the cell cycle and is an important part of cellular responses to intra- and extracellular events.

  12. Nuclear Waste Disposal

    SciTech Connect

    Gee, Glendon W.; Meyer, Philip D.; Ward, Andy L.

    2005-01-12

    Nuclear wastes are by-products of nuclear weapons production and nuclear power generation, plus residuals of radioactive materials used by industry, medicine, agriculture, and academia. Their distinctive nature and potential hazard make nuclear wastes not only the most dangerous waste ever created by mankind, but also one of the most controversial and regulated with respect to disposal. Nuclear waste issues, related to uncertainties in geologic disposal and long-term protection, combined with potential misuse by terrorist groups, have created uneasiness and fear in the general public and remain stumbling blocks for further development of a nuclear industry in a world that may soon be facing a global energy crisis.

  13. Nuclear Security for Floating Nuclear Power Plants

    SciTech Connect

    Skiba, James M.; Scherer, Carolynn P.

    2015-10-13

    Recently there has been a lot of interest in small modular reactors. A specific type of these small modular reactors (SMR,) are marine based power plants called floating nuclear power plants (FNPP). These FNPPs are typically built by countries with extensive knowledge of nuclear energy, such as Russia, France, China and the US. These FNPPs are built in one country and then sent to countries in need of power and/or seawater desalination. Fifteen countries have expressed interest in acquiring such power stations. Some designs for such power stations are briefly summarized. Several different avenues for cooperation in FNPP technology are proposed, including IAEA nuclear security (i.e. safeguards), multilateral or bilateral agreements, and working with Russian design that incorporates nuclear safeguards for IAEA inspections in non-nuclear weapons states

  14. Nuclear fear revisited

    NASA Astrophysics Data System (ADS)

    Crease, Robert P.

    2010-10-01

    In 1988 the science historian Spencer Weart published a groundbreaking book called Nuclear Fear: A History of Images, which examined visions of radiation damage and nuclear disaster in newspapers, television, film, literature, advertisements and popular culture.

  15. Nuclear disarmament verification

    SciTech Connect

    DeVolpi, A.

    1993-12-31

    Arms control treaties, unilateral actions, and cooperative activities -- reflecting the defusing of East-West tensions -- are causing nuclear weapons to be disarmed and dismantled worldwide. In order to provide for future reductions and to build confidence in the permanency of this disarmament, verification procedures and technologies would play an important role. This paper outlines arms-control objectives, treaty organization, and actions that could be undertaken. For the purposes of this Workshop on Verification, nuclear disarmament has been divided into five topical subareas: Converting nuclear-weapons production complexes, Eliminating and monitoring nuclear-weapons delivery systems, Disabling and destroying nuclear warheads, Demilitarizing or non-military utilization of special nuclear materials, and Inhibiting nuclear arms in non-nuclear-weapons states. This paper concludes with an overview of potential methods for verification.

  16. Nuclear Thermal Propulsion (NTP)

    NASA Video Gallery

    NASA's history with nuclear thermal propulsion (NTP) technology goes back to the earliest days of the Agency. The Manned Lunar Rover Vehicle and the Nuclear Engine for Rocket Vehicle Applications p...

  17. Triangle Universities Nuclear Laboratory

    SciTech Connect

    Not Available

    1991-01-01

    This report contains brief papers that discusses the following topics: Fundamental Symmetries in the Nucleus; Internucleon Interactions; Dynamics of Very Light Nuclei; Facets of the Nuclear Many-Body Problem; and Nuclear Instruments and Methods.

  18. Fundamentals in Nuclear Physics

    NASA Astrophysics Data System (ADS)

    Basdevant, Jean-Louis, Rich, James, Spiro, Michael

    This course on nuclear physics leads the reader to the exploration of the field from nuclei to astrophysical issues. Much nuclear phenomenology can be understood from simple arguments such as those based on the Pauli principle and the Coulomb barrier. This book is concerned with extrapolating from such arguments and illustrating nuclear systematics with experimental data. Starting with the basic concepts in nuclear physics, nuclear models, and reactions, the book covers nuclear decays and the fundamental electro-weak interactions, radioactivity, and nuclear energy. After the discussions of fission and fusion leading into nuclear astrophysics, there is a presentation of the latest ideas about cosmology. As a primer this course will lay the foundations for more specialized subjects. This book emerged from a series of topical courses the authors delivered at the Ecole Polytechnique and will be useful for graduate students and for scientists in a variety of fields.

  19. RBC nuclear scan

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003835.htm RBC nuclear scan To use the sharing features on this page, please enable JavaScript. An RBC nuclear scan uses small amounts of radioactive material to ...

  20. Teaching "The Nuclear Predicament."

    ERIC Educational Resources Information Center

    Carman, Philip; Kneeshaw, Stephen

    1987-01-01

    Contends that courses on nuclear war must help students examine the political, social, religious, philosophical, economic, and moral assumptions which characterized the dilemma of nuclear armament/disarmament. Describes the upper level undergraduate course taught by the authors. (JDH)

  1. Nuclear radiation actuated valve

    DOEpatents

    Christiansen, David W.; Schively, Dixon P.

    1985-01-01

    A nuclear radiation actuated valve for a nuclear reactor. The valve has a valve first part (such as a valve rod with piston) and a valve second part (such as a valve tube surrounding the valve rod, with the valve tube having side slots surrounding the piston). Both valve parts have known nuclear radiation swelling characteristics. The valve's first part is positioned to receive nuclear radiation from the nuclear reactor's fuel region. The valve's second part is positioned so that its nuclear radiation induced swelling is different from that of the valve's first part. The valve's second part also is positioned so that the valve's first and second parts create a valve orifice which changes in size due to the different nuclear radiation caused swelling of the valve's first part compared to the valve's second part. The valve may be used in a nuclear reactor's core coolant system.

  2. Nuclear power browning out

    SciTech Connect

    Flavin, C.; Lenssen, N.

    1996-05-01

    When the sad history of nuclear power is written, April 26, 1986, will be recorded as the day the dream died. The explosion at the Chernobyl plant was a terrible human tragedy- and it delivered a stark verdict on the hope that nuclear power will one day replace fossil fuel-based energy systems. Nuclear advocates may soldier on, but a decade after Chernobyl it is clear that nuclear power is no longer a viable energy option for the twenty-first century.

  3. Nuclear air cushion vehicles.

    NASA Technical Reports Server (NTRS)

    Anderson, J. L.

    1973-01-01

    This paper serves several functions. It identifies the 'state-of-the-art' of the still-conceptual nuclear air cushion vehicle, particularly the nuclear powerplant. Using mission studies and cost estimates, the report describes some of the advantages of nuclear power for large air cushion vehicles. The paper also summarizes the technology studies on mobile nuclear powerplants and conceptual ACV systems/missions studies that have been performed at NASA Lewis Research Center.

  4. Nuclear fact book

    SciTech Connect

    Hill, O. F.; Platt, A. M.; Robinson, J. V.

    1983-05-01

    This reference provides significant highlights and summary facts in the following areas: general energy; nuclear energy; nuclear fuel cycle; uranium supply and enrichment; nuclear reactors; spent fuel and advanced repacking concepts; reprocessing; high-level waste; gaseous waste; transuranic waste; low-level waste; remedial action; transportation; disposal; radiation information; environment; legislation; socio-political aspects; conversion factors; and a glossary. (GHT)

  5. Nuclear energy technology

    NASA Technical Reports Server (NTRS)

    Buden, David

    1992-01-01

    An overview of space nuclear energy technologies is presented. The development and characteristics of radioisotope thermoelectric generators (RTG's) and space nuclear power reactors are discussed. In addition, the policy and issues related to public safety and the use of nuclear power sources in space are addressed.

  6. NUCLEAR REACTOR CONTROL SYSTEM

    DOEpatents

    Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

    1959-11-01

    A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

  7. Revitalizing Nuclear Safety Research.

    ERIC Educational Resources Information Center

    National Academy of Sciences - National Research Council, Washington, DC.

    This report covers the general issues involved in nuclear safety research and points out the areas needing detailed consideration. Topics included are: (1) "Principles of Nuclear Safety Research" (examining who should fund, who should conduct, and who should set the agenda for nuclear safety research); (2) "Elements of a Future Agenda for Nuclear…

  8. Basic Nuclear Physics.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic concepts of nuclear structures, radiation, nuclear reactions, and health physics are presented in this text, prepared for naval officers. Applications to the area of nuclear power are described in connection with pressurized water reactors, experimental boiling water reactors, homogeneous reactor experiments, and experimental breeder…

  9. Effects of Nuclear Weapons.

    ERIC Educational Resources Information Center

    Sartori, Leo

    1983-01-01

    Fundamental principles governing nuclear explosions and their effects are discussed, including three components of a nuclear explosion (thermal radiation, shock wave, nuclear radiation). Describes how effects of these components depend on the weapon's yield, its height of burst, and distance of detonation point. Includes effects of three…

  10. Teaching Nuclear History.

    ERIC Educational Resources Information Center

    Holl, Jack M.; Convis, Sheila C.

    1991-01-01

    Presents results of a survey of the teaching about nuclear history at U.S. colleges and universities. Reports the existence of a well-established and extensive literature, a focus on nuclear weapons or warfare, and a concentration on nuclear citizenship, therapy, or eschatology for courses outside of history departments. Discusses individual…

  11. Commercial nuclear power 1990

    SciTech Connect

    Not Available

    1990-09-28

    This report presents the status at the end of 1989 and the outlook for commercial nuclear capacity and generation for all countries in the world with free market economies (FME). The report provides documentation of the US nuclear capacity and generation projections through 2030. The long-term projections of US nuclear capacity and generation are provided to the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) for use in estimating nuclear waste fund revenues and to aid in planning the disposal of nuclear waste. These projections also support the Energy Information Administration's annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment, and are provided to the Organization for Economic Cooperation and Development. The foreign nuclear capacity projections are used by the DOE uranium enrichment program in assessing potential markets for future enrichment contracts. The two major sections of this report discuss US and foreign commercial nuclear power. The US section (Chapters 2 and 3) deals with (1) the status of nuclear power as of the end of 1989; (2) projections of nuclear capacity and generation at 5-year intervals from 1990 through 2030; and (3) a discussion of institutional and technical issues that affect nuclear power. The nuclear capacity projections are discussed in terms of two projection periods: the intermediate term through 2010 and the long term through 2030. A No New Orders case is presented for each of the projection periods, as well as Lower Reference and Upper Reference cases. 5 figs., 30 tabs.

  12. History of Nuclear India

    NASA Astrophysics Data System (ADS)

    Chaturvedi, Ram

    2000-04-01

    India emerged as a free and democratic country in 1947, and entered into the nuclear age in 1948 by establishing the Atomic Energy Commission (AEC), with Homi Bhabha as the chairman. Later on the Department of Atomic Energy (DAE) was created under the Office of the Prime Minister Jawahar Lal Nehru. Initially the AEC and DAE received international cooperation, and by 1963 India had two research reactors and four nuclear power reactors. In spite of the humiliating defeat in the border war by China in 1962 and China's nuclear testing in 1964, India continued to adhere to the peaceful uses of nuclear energy. On May 18, 1974 India performed a 15 kt Peaceful Nuclear Explosion (PNE). The western powers considered it nuclear weapons proliferation and cut off all financial and technical help, even for the production of nuclear power. However, India used existing infrastructure to build nuclear power reactors and exploded both fission and fusion devices on May 11 and 13, 1998. The international community viewed the later activity as a serious road block for the Non-Proliferation Treaty and the Comprehensive Test Ban Treaty; both deemed essential to stop the spread of nuclear weapons. India considers these treaties favoring nuclear states and is prepared to sign if genuine nuclear disarmament is included as an integral part of these treaties.

  13. Thermodynamics of nuclear transport

    NASA Astrophysics Data System (ADS)

    Wang, Ching-Hao; Mehta, Pankaj; Elbaum, Michael

    Molecular transport across the nuclear envelope is important for eukaryotes for gene expression and signaling. Experimental studies have revealed that nuclear transport is inherently a nonequilibrium process and actively consumes energy. In this work we present a thermodynamics theory of nuclear transport for a major class of nuclear transporters that are mediated by the small GTPase Ran. We identify the molecular elements responsible for powering nuclear transport, which we term the ``Ran battery'' and find that the efficiency of transport, measured by the cargo nuclear localization ratio, is limited by competition between cargo molecules and RanGTP to bind transport receptors, as well as the amount of NTF2 (i.e. RanGDP carrier) available to circulate the energy flow. This picture complements our current understanding of nuclear transport by providing a comprehensive thermodynamics framework to decipher the underlying biochemical machinery. Pm and CHW were supported by a Simons Investigator in the Mathematical Modeling in Living Systems grant (to PM).

  14. Overview of nuclear data

    SciTech Connect

    Firestone, R.B.

    2003-06-30

    For many years, nuclear structure and decay data have been compiled and disseminated by an International Network of Nuclear Structure and Decay Data (NSDD) evaluators under the auspices of the International Nuclear Data Committee (INDC) of the International Atomic Energy Agency (IAEA). In this lecture I will discuss the kinds of data that are available and describe various ways to obtain this information. We will learn about some of the publications that are available and Internet sources of nuclear data. You will be introduced to Isotope Explorer software for retrieving and displaying nuclear structure and radioactive decay data. The on-line resources Table of Radioactive Isotopes, PGAA Database Viewer, Nuclear Science Reference Search, Table of Isotopes Educational Website, and other information sources will be discussed. Exercises will be provided to increase your ability to understand, access, and use nuclear data.

  15. Environmental consequences of nuclear war

    SciTech Connect

    Harwell, M.A.; Hutchinson, T.C.; Cropper, W.P. Jr.; Harwell, C.C.; Grover, H.D.

    1989-01-01

    This book addresses the ecological, agricultural, and human effects of nuclear war. The topics covered include: Ecological principles relevant to nuclear war; Vulnerability of ecological systems to climatic effects on nuclear war; Additional potential effects of nuclear war on ecological systems; Potential effects of nuclear war on agricultural productivity; Food availability after nuclear war; and Experiences and extrapolations from Hiroshima and Nagasaki.

  16. Nuclear Reactor Physics

    NASA Astrophysics Data System (ADS)

    Stacey, Weston M.

    2001-02-01

    An authoritative textbook and up-to-date professional's guide to basic and advanced principles and practices Nuclear reactors now account for a significant portion of the electrical power generated worldwide. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. Nuclear reactor physics is the core discipline of nuclear engineering, and as the first comprehensive textbook and reference on basic and advanced nuclear reactor physics to appear in a quarter century, this book fills a large gap in the professional literature. Nuclear Reactor Physics is a textbook for students new to the subject, for others who need a basic understanding of how nuclear reactors work, as well as for those who are, or wish to become, specialists in nuclear reactor physics and reactor physics computations. It is also a valuable resource for engineers responsible for the operation of nuclear reactors. Dr. Weston Stacey begins with clear presentations of the basic physical principles, nuclear data, and computational methodology needed to understand both the static and dynamic behaviors of nuclear reactors. This is followed by in-depth discussions of advanced concepts, including extensive treatment of neutron transport computational methods. As an aid to comprehension and quick mastery of computational skills, he provides numerous examples illustrating step-by-step procedures for performing the calculations described and chapter-end problems. Nuclear Reactor Physics is a useful textbook and working reference. It is an excellent self-teaching guide for research scientists, engineers, and technicians involved in industrial, research, and military applications of nuclear reactors, as well as government regulators who wish to increase their understanding of nuclear reactors.

  17. British nuclear policymaking

    SciTech Connect

    Bowie, C.J.; Platt, A.

    1984-01-01

    This study analyzes the domestic political, economic, and bureaucratic factors that affect the nuclear policymaking process in Great Britain. Its major conclusion is that, although there have been changes in that process in recent years (notably the current involvement of a segment of the British public in the debate about the deployment of intermediate-range nuclear forces), future British nuclear policymaking will remain much what it has been in the past. Three ideas are central to understanding British thinking on the subject: (1) Britain's long-standing resolve to have her own national nuclear force is largely traceable to her desire to maintain first-rank standing among the nations of the world in spite of loss of empire. (2) Financial considerations have always been important--so much so that they have usually dominated issues of nuclear policy. (3) The executive branch of government dominates the nuclear policymaking process but does not always present a united front. The United States heavily influences British nuclear policy through having supplied Britain since the late 1950s with nuclear data and components of nuclear weapon systems such as Polaris and Trident. The relationship works both ways since the U.S. depends on Britain as a base for deployment of both conventional and nuclear systems.

  18. NUCLEAR DATABASES FOR REACTOR APPLICATIONS.

    SciTech Connect

    PRITYCHENKO, B.; ARCILLA, R.; BURROWS, T.; HERMAN, M.W.; MUGHABGHAB, S.; OBLOZINSKY, P.; ROCHMAN, D.; SONZOGNI, A.A.; TULI, J.; WINCHELL, D.F.

    2006-06-05

    The National Nuclear Data Center (NNDC): An overview of nuclear databases, related products, nuclear data Web services and publications. The NNDC collects, evaluates, and disseminates nuclear physics data for basic research and applied nuclear technologies. The NNDC maintains and contributes to the nuclear reaction (ENDF, CSISRS) and nuclear structure databases along with several others databases (CapGam, MIRD, IRDF-2002) and provides coordination for the Cross Section Evaluation Working Group (CSEWG) and the US Nuclear Data Program (USNDP). The Center produces several publications and codes such as Atlas of Neutron Resonances, Nuclear Wallet Cards booklets and develops codes, such as nuclear reaction model code Empire.

  19. Nuclear Science References Database

    SciTech Connect

    Pritychenko, B.; Běták, E.; Singh, B.; Totans, J.

    2014-06-15

    The Nuclear Science References (NSR) database together with its associated Web interface, is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 210,000 articles since the beginning of nuclear science. The weekly-updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center (http://www.nndc.bnl.gov/nsr) and the International Atomic Energy Agency (http://www-nds.iaea.org/nsr)

  20. Ongoing Space Nuclear Activities

    NASA Technical Reports Server (NTRS)

    Houts, Michael G.

    2007-01-01

    Most ongoing US activities related to space nuclear power and propulsion are sponsored by NASA. NASA-spons0red space nuclear work is currently focused on evaluating potential fission surface power (FSP) systems and on radioisotope power systems (RPS). In addition, significant efforts related to nuclear thermal propulsion (NTP) systems have been completed and will provide a starting point for potential future NTP work.

  1. Assessing the nuclear age

    SciTech Connect

    Ackland, L.; McGuire, S.

    1986-01-01

    This book presents papers on nuclear weapons and arms control. Topics considered include historical aspects, the arms race, nuclear power, flaws in the non-proliferation treaty, North-South issues, East-West confrontation, Soviet decision making with regard to national defense, US and Soviet perspectives on national security, ballistic missile defense (''Star Wars''), political aspects, nuclear winter, stockpiles, US foreign policy, and military strategy.

  2. Nuclear power in space

    SciTech Connect

    Aftergood, S. ); Hafemeister, D.W. ); Prilutsky, O.F.; Rodionov, S.N. ); Primack, J.R. )

    1991-06-01

    Nuclear reactors have provided energy for satellites-with nearly disastrous results. Now the US government is proposing to build nuclear-powered boosters to launch Star Wars defenses. These authors represent scientific groups that are opposed to the use of nuclear power in near space. The authors feel that the best course for space-borne reactors is to ban them from Earth orbit and use them in deep space.

  3. Nuclear power in space

    NASA Astrophysics Data System (ADS)

    Written and verbal testimony presented before the House Subcommittee on Energy Research and Development is documented. Current research efforts related to space nuclear power are discussed including the SP-100 Space Reactor Program, development of radioisotope thermoelectric generators, and the Advanced Nuclear Systems Program. Funding, research and test facilities, specific space mission requirements, and the comparison of solar and nuclear power systems are addressed. Witnesses included representatives from DOD, NASA, DOE, universities, and private industry.

  4. Nuclear Proliferation Challenges

    SciTech Connect

    Professor William Potter

    2005-11-28

    William C. Potter, Director of the Center for Non Proliferation Studies and the Center for Russian and Eurasian Studies at the Monterey Institute of International Studies, will present nuclear proliferation challenges following the 2005 Nuclear Non-Proliferation Treaty (NPT) Review Conference. In addition to elucidating reasons for, and implications of, the conference’s failure, Dr. Potter will discuss common ground between nuclear proliferation and terrorism issues and whether corrective action can be taken.

  5. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2012-05-15

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  6. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2010-07-13

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  7. Nuclear Fabrication Consortium

    SciTech Connect

    Levesque, Stephen

    2013-04-05

    This report summarizes the activities undertaken by EWI while under contract from the Department of Energy (DOE) Office of Nuclear Energy (NE) for the management and operation of the Nuclear Fabrication Consortium (NFC). The NFC was established by EWI to independently develop, evaluate, and deploy fabrication approaches and data that support the re-establishment of the U.S. nuclear industry: ensuring that the supply chain will be competitive on a global stage, enabling more cost-effective and reliable nuclear power in a carbon constrained environment. The NFC provided a forum for member original equipment manufactures (OEM), fabricators, manufacturers, and materials suppliers to effectively engage with each other and rebuild the capacity of this supply chain by : Identifying and removing impediments to the implementation of new construction and fabrication techniques and approaches for nuclear equipment, including system components and nuclear plants. Providing and facilitating detailed scientific-based studies on new approaches and technologies that will have positive impacts on the cost of building of nuclear plants. Analyzing and disseminating information about future nuclear fabrication technologies and how they could impact the North American and the International Nuclear Marketplace. Facilitating dialog and initiate alignment among fabricators, owners, trade associations, and government agencies. Supporting industry in helping to create a larger qualified nuclear supplier network. Acting as an unbiased technology resource to evaluate, develop, and demonstrate new manufacturing technologies. Creating welder and inspector training programs to help enable the necessary workforce for the upcoming construction work. Serving as a focal point for technology, policy, and politically interested parties to share ideas and concepts associated with fabrication across the nuclear industry. The report the objectives and summaries of the Nuclear Fabrication Consortium

  8. Nuclear free zone

    SciTech Connect

    Christoffel, T.

    1987-07-01

    Health professionals have played a leading role in alerting and educating the public regarding the danger of nuclear war which has been described as the last epidemic our civilization will know. Having convinced most people that the use of nuclear weapons would mean intolerable consequences, groups such as Physicians for Social Responsibility have focused on the second critical question how likely is it that these weapons will be used. The oultlook is grim. This article describes the nuclear free zone movement, explores relevant legal questions, and shows how the political potential of nuclear free zones threatens to open a deep rift in the American constitutional system.

  9. Nuclear reactor apparatus

    DOEpatents

    Wade, Elman E.

    1978-01-01

    A lifting, rotating and sealing apparatus for nuclear reactors utilizing rotating plugs above the nuclear reactor core. This apparatus permits rotation of the plugs to provide under the plug refueling of a nuclear core. It also provides a means by which positive top core holddown can be utilized. Both of these operations are accomplished by means of the apparatus lifting the top core holddown structure off the nuclear core while stationary, and maintaining this structure in its elevated position during plug rotation. During both of these operations, the interface between the rotating member and its supporting member is sealingly maintained.

  10. Technologists for Nuclear Medicine

    ERIC Educational Resources Information Center

    Barnett, Huey D.

    1974-01-01

    Physicians need support personnel for work with radioisotopes in diagnosing dangerous diseases. The Nuclear Medicine Technology (NMT) Program at Hillsborough Community College in Tampa, Florida, is described. (MW)

  11. High Efficiency Generation of Hydrogen Fuels using Nuclear Power Annual Report August, 2000 - July 2001

    SciTech Connect

    Brown, L.C.

    2002-11-01

    OAK B188 High Efficiency Generation of Hydrogen Fuels using Nuclear Power Annual Report August 2000 - July 2001. Currently no large scale, cost-effective, environmentally attractive hydrogen production process is available for commercialization nor has such a process been identified. Hydrogen is a promising energy carrier, which potentially could replace the fossil fuels used in the transportation sector of our economy. Carbon dioxide emissions from fossil fuel combustion are thought to be responsible for global warming. The purpose of this work is to determine the potential for efficient, cost-effective, large-scale production of hydrogen utilizing high temperature heat from an advanced nuclear power station. The benefits of this work will include the generation of a low-polluting transportable energy feedstock in an efficient method that has little or no implication for greenhouse gas emissions from a primary energy source whose availability and sources are domestically controlled. This will help to ensure energy for a future transportation/energy infrastructure that is not influenced/controlled by foreign governments. This report describes work accomplished during the second year (Phase 2) of a three year project whose objective is to ''define an economically feasible concept for production of hydrogen, by nuclear means, using an advanced high temperature nuclear reactor as the energy source.'' The emphasis of the first year (Phase 1) was to evaluate thermochemical processes which offer the potential for efficient, cost-effective, large-scale production of hydrogen from water, in which the primary energy input is high temperature heat from an advanced nuclear reactor and to select one (or, at most, three) for further detailed consideration. Phase 1 met its goals and did select one process, the sulfur-iodine process, for investigation in Phases 2 and 3. The combined goals of Phases 2 and 3 were to select the advanced nuclear reactor best suited to driving the

  12. Nuclear Energy and the Environment.

    ERIC Educational Resources Information Center

    International Atomic Energy Agency, Vienna (Austria).

    "Nuclear Energy and the Environment" is a pocket folder of removable leaflets concerned with two major topics: Nuclear energy and Nuclear Techniques. Under Nuclear Energy, leaflets concerning the topics of "Radiation--A Fact of Life,""The Impact of a Fact: 1963 Test Ban Treaty,""Energy Needs and Nuclear Power,""Power Reactor Safety,""Transport,"…

  13. Gordon Conference on Nuclear Research

    SciTech Connect

    Austin, S.M.

    1983-09-01

    Session topics were: quarks and nuclear physics; anomalons and anti-protons; the independent particle structure of nuclei; relativistic descriptions of nuclear structure and scattering; nuclear structure at high excitation; advances in nuclear astrophysics; properties of nuclear material; the earliest moments of the universe; and pions and spin excitations in nuclei.

  14. Nuclear-Powered Debate.

    ERIC Educational Resources Information Center

    Arce, Gary

    1992-01-01

    Describes an exercise to develop interest and understanding about nuclear energy in which students make presentations regarding a proposal to build a hypothetical nuclear power plant. Students spend two weeks researching the topic; give testimony before a "Senate Energy Committee"; and vote on the proposal. Background information is provided. (MDH)

  15. Exotic nuclear matter

    NASA Astrophysics Data System (ADS)

    Lenske, H.; Dhar, M.; Tsoneva, N.; Wilhelm, J.

    2016-01-01

    Recent developments of nuclear structure theory for exotic nuclei are addressed. The inclusion of hyperons and nucleon resonances is discussed. Nuclear multipole response functions, hyperon interactions in infinite matter and in neutron stars and theoretical aspects of excitations of nucleon resonances in nuclei are discussed.

  16. Nuclear Taskforce Summation.

    ERIC Educational Resources Information Center

    1979

    At the end of 1978, there were approximately 230 nuclear-fueled electric generating plants around the world; 72 of these were in the United States. Each plant requires an operations-and-maintenance workforce of 92 people, and attrition occurs at a rate of 8% per year. Requirements for a nuclear taskforce and job training, in view of current…

  17. High energy nuclear structures

    SciTech Connect

    Boguta, J.; Kunz, J.

    1984-03-09

    In conventional nuclear physics the nucleus is described as a non-relativistic many-body system, which is governed by the Schroedinger equation. Nucleons interact in this framework via static two-body potentials, mesonic degrees of freedom are neglected. An alternative description of nuclear physics in terms of a relativistic field theory has been developed by Walecka. The model Lagrangian containing baryons, sigma-mesons and ..omega..-mesons was subsequently extended to include also ..pi..-mesons and rho-mesons. An essential feature of such a nuclear Lagrangian is its renormalizability. In addition to the description of known nuclear structure the field theoretical approach may reveal entirely new nuclear phenomena, based on the explicit treatment of mesonic degrees of freedom. The existence of such abnormal nuclear states was proposed by Lee and Wick employing the sigma-model Lagrangian. There the non-linearity of the meson field equations allows for soliton solutions in the presence of nucleons, in particular the sigma-field may exhibit a kink. Different types of soliton solutions occur in gauge theories with hidden symmetries. In the phenomenological Lagrangian the rho-meson is described by a non-abelian gauge field, that acquires its mass spontaneously due to the non-vanishing vacuum expectation value of a Higgs field. A general ansatz for soliton solutions of such a gauge theory was given by Dashen et al. A specific solution and its possible implications for nuclear physics like anomalous nuclear states were discussed by Boguta.

  18. Nuclear Charge Radii Systematics

    SciTech Connect

    Marinova, Krassimira

    2015-09-15

    This paper is a brief overview of the existing systematics on nuclear mean square charge radii, obtained by a combined analysis of data from different types of experiment. The various techniques yielding data on nuclear charge radii are summarized. Their specific feature complexities and the accuracy and precision of the obtained information are also discussed.

  19. Talk About Nuclear Power

    ERIC Educational Resources Information Center

    Tremlett, Lewis

    1976-01-01

    Presents an overview of the relation of nuclear power to human health and the environment, and discusses the advantages and disadvantages of nuclear power as an energy source urging technical educators to inculcate an awareness of the problems associated with the production of energy. Describes the fission reaction process, the hazards of…

  20. Nuclear physics and cosmology

    SciTech Connect

    Coc, Alain

    2014-05-09

    There are important aspects of Cosmology, the scientific study of the large scale properties of the universe as a whole, for which nuclear physics can provide insights. Here, we will focus on Standard Big-Bang Nucleosynthesis and we refer to the previous edition of the School [1] for the aspects concerning the variations of constants in nuclear cosmo-physics.