Pedagogical Reforms within a Centralised-Decentralised System: A Singapore's Perspective to Diffuse 21st Century Learning Innovations

ERIC Educational Resources Information Center

Toh, Yancy; Hung, Wei Loong David; Chua, Paul Meng-Huat; He, Sujin; Jamaludin, Azilawati

2016-01-01

Purpose: The purpose of this paper is to illustrate the dialectical interplay between centralisation and decentralisation forces so as to understand how schools leverage on its autonomous pedagogical space, influence the diffusion of innovations in the educational landscape of Singapore and how a centralised-decentralised system supports (or…

Quality Assurance in the German School System

ERIC Educational Resources Information Center

Huber, Stephan Gerhard; Gordel, Bettina

2006-01-01

Whereas internationally the shift towards quality control of school systems started in the early 1980s, mainly promoted by transnational agencies, this development only began in Germany in the mid 1990s. However, a clear-cut change from an input-controlled and centralised to a more output-controlled, decentralised and deregulated supervision…

[The role of the Committee for Medicinal Products for Human Use (CHMP) in the European centralised procedure].

PubMed

Enzmann, Harald; Schneider, C

2008-07-01

The centralised procedure for marketing authorisation at the European Medicines Agency (EMEA) started more than 10 years ago, offering marketing authorisation for all member states of the European Union in a single procedure. Originally it was a purely optional alternative to the established national procedures; however, its importance has been growing ever since. The introduction of the mandatory scope for several important indications was a crucial step. The increasing importance of the centralised procedure was paralleled by the increasing weight of the EMEA and of the Committee for Human Medicinal Products (CHMP) who is responsible for scientific evaluation in the centralised procedure. This paper describes the basic principles of the centralised procedure including the definitions of the mandatory and optional scope, and how the CHMP works including its responsibility in European referrals that provide a link to national procedures.

Decline and Fall: Are State Schools and Universities on the Point of Collapse?

ERIC Educational Resources Information Center

Brighouse, Tim

2012-01-01

This contribution is an edited version of the "Alumni Lecture" organised by the Department of Education of the University of Oxford at Lady Margaret Hall on 15th September 2011. The article reviews the drift towards the centralisation of power in the way the schooling system is run, the conflict between a desire for equity in education…

How to Shift Power to Learners: Encouraging FE Dynamism, Replacing Centralised Procurement

ERIC Educational Resources Information Center

Wolf, Alison

2010-01-01

This monograph discusses how to make England's further education (FE) system genuinely responsive to learner demand, as well as stable, affordable, and of high quality. It looks at how a demand-driven system can be organised and funded, at what is required of governments, and what can be left to learners themselves and to the education and…

Improving survival and local control in rectal cancer in Catalonia (Spain) in the context of centralisation: A full cycle audit assessment.

PubMed

Manchon-Walsh, P; Aliste, L; Espinàs, J A; Prades, J; Guarga, A; Balart, J; Biondo, S; Castells, A; Sanjuan, X; Tabernero, J; Borras, J M

2016-12-01

Rectal cancer surgery in Catalonia has been involved in a process of centralisation. We assessed the impact of this health policy strategy on quality of care and clinical results. We compared patterns of care and clinical outcomes of all rectal cancer patients receiving radical surgery for the first time in public hospitals in two time periods, before (2005 and 2007) and after (2011-2012) centralisation, analysing indicators of care quality according to the regional clinical practice guidelines. Clinical outcomes at two years were also assessed. A total of 3780 patients were included. From 2005 to 2012, the proportion of patients treated surgically for the first time in centres whose annual surgical caseload was more than 11 increased from 84.0% to 90.4%. The rate of locoregional recurrence at two years fell from 4.5 to 3.06/100 person-years (p = 0.005). The crude mortality rate at three months, one and two years was reduced by 55%, 40% and 34% (p < 0.001). Improvements in quality of care might be associated with the centralisation of surgery and with the selective focus effect derived from the process of auditing. Our results support the continuation of clinical auditing and surveillance of authorised centres. Copyright © 2016 Elsevier Ltd, BASO ~ The Association for Cancer Surgery, and the European Society of Surgical Oncology. All rights reserved.

Economies of density for on-site waste water treatment.

PubMed

Eggimann, Sven; Truffer, Bernhard; Maurer, Max

2016-09-15

Decentralised wastewater treatment is increasingly gaining interest as a means of responding to sustainability challenges. Cost comparisons are a crucial element of any sustainability assessment. While the cost characteristics of centralised waste water management systems (WMS) have been studied extensively, the economics of decentralised WMS are less understood. A key motivation for studying the costs of decentralised WMS is to compare the cost of centralised and decentralised WMS in order to decide on cost-efficient sanitation solutions. This paper outlines a model designed to assess those costs which depend on the spatial density of decentralised wastewater treatment plants in a region. Density-related costs are mostly linked to operation and maintenance activities which depend on transportation, like sludge removal or the visits of professionals to the plants for control, servicing or repairs. We first specify a modelled cost-density relationship for a region in a geometric two-dimensional space by means of heuristic routing algorithms that consider time and load-capacity restrictions. The generic model is then applied to a Swiss case study for which we specify a broad range of modelling parameters. As a result, we identify a 'hockey-stick'-shaped cost curve that is characterised by strong cost reductions at high density values which level out at around 1 to 1.5 plants per km(2). Variations in the cost curves are mostly due to differences in management approaches (scheduled or unscheduled emptying). In addition to the well-known diseconomies of scale in the case of centralised sanitation, we find a similar generic cost behaviour for decentralised sanitation due to economies of density. Low densities in sparsely populated regions thus result in higher costs for both centralised and decentralised system. Policy implications are that efforts to introduce decentralised options in a region should consider the low-density/high-cost problem when comparing centralised and decentralised options. Copyright © 2016 Elsevier Ltd. All rights reserved.

To connect or not to connect? Modelling the optimal degree of centralisation for wastewater infrastructures.

PubMed

Eggimann, Sven; Truffer, Bernhard; Maurer, Max

2015-11-01

The strong reliance of most utility services on centralised network infrastructures is becoming increasingly challenged by new technological advances in decentralised alternatives. However, not enough effort has been made to develop planning tools designed to address the implications of these new opportunities and to determine the optimal degree of centralisation of these infrastructures. We introduce a planning tool for sustainable network infrastructure planning (SNIP), a two-step techno-economic heuristic modelling approach based on shortest path-finding and hierarchical-agglomerative clustering algorithms to determine the optimal degree of centralisation in the field of wastewater management. This SNIP model optimises the distribution of wastewater treatment plants and the sewer network outlay relative to several cost and sewer-design parameters. Moreover, it allows us to construct alternative optimal wastewater system designs taking into account topography, economies of scale as well as the full size range of wastewater treatment plants. We quantify and confirm that the optimal degree of centralisation decreases with increasing terrain complexity and settlement dispersion while showing that the effect of the latter exceeds that of topography. Case study results for a Swiss community indicate that the calculated optimal degree of centralisation is substantially lower than the current level. Copyright © 2015 Elsevier Ltd. All rights reserved.

A study of physician collaborations through social network and exponential random graph

PubMed Central

2013-01-01

Background Physician collaboration, which evolves among physicians during the course of providing healthcare services to hospitalised patients, has been seen crucial to effective patient outcomes in healthcare organisations and hospitals. This study aims to explore physician collaborations using measures of social network analysis (SNA) and exponential random graph (ERG) model. Methods Based on the underlying assumption that collaborations evolve among physicians when they visit a common hospitalised patient, this study first proposes an approach to map collaboration network among physicians from the details of their visits to patients. This paper terms this network as physician collaboration network (PCN). Second, SNA measures of degree centralisation, betweenness centralisation and density are used to examine the impact of SNA measures on hospitalisation cost and readmission rate. As a control variable, the impact of patient age on the relation between network measures (i.e. degree centralisation, betweenness centralisation and density) and hospital outcome variables (i.e. hospitalisation cost and readmission rate) are also explored. Finally, ERG models are developed to identify micro-level structural properties of (i) high-cost versus low-cost PCN; and (ii) high-readmission rate versus low-readmission rate PCN. An electronic health insurance claim dataset of a very large Australian health insurance organisation is utilised to construct and explore PCN in this study. Results It is revealed that the density of PCN is positively correlated with hospitalisation cost and readmission rate. In contrast, betweenness centralisation is found negatively correlated with hospitalisation cost and readmission rate. Degree centralisation shows a negative correlation with readmission rate, but does not show any correlation with hospitalisation cost. Patient age does not have any impact for the relation of SNA measures with hospitalisation cost and hospital readmission rate. The 2-star parameter of ERG model has significant impact on hospitalisation cost. Furthermore, it is found that alternative-k-star and alternative-k-two-path parameters of ERG model have impact on readmission rate. Conclusions Collaboration structures among physicians affect hospitalisation cost and hospital readmission rate. The implications of the findings of this study in terms of their potentiality in developing guidelines to improve the performance of collaborative environments among healthcare professionals within healthcare organisations are discussed in this paper. PMID:23803165

Production planning and backup sourcing strategy of a buyer-dominant supply chain with random yield and demand

NASA Astrophysics Data System (ADS)

Chen, Kebing; Xiao, Tiaojun

2015-11-01

This paper studies the backup sourcing strategy of the buyer and the production planning of the supplier in presence of both random yield and random demand. Since the production is susceptible to the randomness of yield beyond the control of the supplier, the buyer may access to a backup sourcing option for the finished items. We analyse the value of backup sourcing for both the decentralised and centralised channels. Backup sourcing strategy of the buyer may lower the supply chain's performance. We show that the order quantity of the buyer does not change the stocking factor of the supplier's input. Meanwhile, compared with the centralised operation, the decentralised operation is more dependent on the backup sourcing to reduce supply shortage of the contracting supplier. From the channel's perspective, an incentive scheme is developed to facilitate the coordination of both the buyer and the contracting supplier, we show that the proposed option contract can allow the supply chain members to share the respective risks involved in the production and selling processes. Finally, we also provide qualitative insights based on numerical examples of the centralised and decentralised solutions.

Quality Leadership and Quality Control

PubMed Central

Badrick, Tony

2003-01-01

Different quality control rules detect different analytical errors with varying levels of efficiency depending on the type of error present, its prevalence and the number of observations. The efficiency of a rule can be gauged by inspection of a power function graph. Control rules are only part of a process and not an end in itself; just as important are the trouble-shooting systems employed when a failure occurs. 'Average of patient normals' may develop as a usual adjunct to conventional quality control serum based programmes. Acceptable error can be based on various criteria; biological variation is probably the most sensible. Once determined, acceptable error can be used as limits in quality control rule systems. A key aspect of an organisation is leadership, which links the various components of the quality system. Leadership is difficult to characterise but its key aspects include trust, setting an example, developing staff and critically setting the vision for the organisation. Organisations also have internal characteristics such as the degree of formalisation, centralisation, and complexity. Medical organisations can have internal tensions because of the dichotomy between the bureaucratic and the shadow medical structures. PMID:18568046

Progress in centralised ethics review processes: Implications for multi-site health evaluations.

PubMed

Prosser, Brenton; Davey, Rachel; Gibson, Diane

2015-04-01

Increasingly, public sector programmes respond to complex social problems that intersect specific fields and individual disciplines. Such responses result in multi-site initiatives that can span nations, jurisdictions, sectors and organisations. The rigorous evaluation of public sector programmes is now a baseline expectation. For evaluations of large and complex multi-site programme initiatives, the processes of ethics review can present a significant challenge. However in recent years, there have been new developments in centralised ethics review processes in many nations. This paper provides the case study of an evaluation of a national, inter-jurisdictional, cross-sector, aged care health initiative and its encounters with Australian centralised ethics review processes. Specifically, the paper considers progress against the key themes of a previous five-year, five nation study (Fitzgerald and Phillips, 2006), which found that centralised ethics review processes would save time, money and effort, as well as contribute to more equitable workloads for researchers and evaluators. The paper concludes with insights for those charged with refining centralised ethics review processes, as well as recommendations for future evaluators of complex multi-site programme initiatives. Copyright © 2015 Elsevier Ltd. All rights reserved.

76 FR 37241 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-27

... Aircraft Monitoring] warnings during the landing gear retraction or extension sequence. * * * * * This... [Electronic Centralised Aircraft Monitoring] warnings during the landing gear retraction or extension sequence... [Electronic Centralised Aircraft [[Page 37243

Managing the Paradox of Control: The Case of Ground-Up Implementation of Active Learning in Singapore's Primary Schools

ERIC Educational Resources Information Center

Lim-Ratnam, Christina; Atencio, Matthew; Lee, Christine Kim-Eng

2016-01-01

The Singaporean education system has recently shifted emphasis from being highly centralised and standardised towards one that aims to promote innovation and autonomy at the school level. Yet, the concomitant move towards a more decentralised and flexible curriculum enacted and controlled at the local level has not been straightforward.…

Fuel cells - a new contributor to stationary power

NASA Astrophysics Data System (ADS)

Dufour, Angelo U.

Stationary power generation historically started as distributed generation near the user, with the configuration of a very open market, where a lot of small competing utilities were offering electricity to the customers. At a second time it became a `monopolistic' business because of technical reasons. Big steam turbines and electric generators, allowing better efficiencies, were more conveniently installed in very large power plants, necessarily located in sites far away from where the power was needed, and the transmission losses were bounded by AC high voltage technology. The Governments were, therefore, trying to balance the power of monopolies, that were limiting the economical development of the countries, by strengthening the concept of electrical energy price public control and, alternatively, by establishing rules to allow a free flow of electricity from one region to the other, or taking direct control through ownership of big and small utilities. The most effective way of making the electric energy system competitive has proved to be the opening of a partial competition in the generation field by forcing the utilities to compare the cost of their energy, produced with new centralised plants, to the price of the available energy, coming from combined heat and power dispersed generators. In fact, with reference to this cost, all the peculiar features of large central stations and dispersed generators were taken into account, like the widespread use of natural gas, the investment risk reduction with single smaller increments of capacity, the transmission and distribution siting difficulties and high costs, the improved system reliability, and, finally, the high quality electric power. Fuel Cells are a recently become available technology for distributed electrical energy production, because they share the main typical aspects, relevant for a distributed power system, like compatibility with other modular subsystem packages, fully automation possibility, very low noise and emissions release, high efficiency both directly as fuel cell (38-55%) and in integrated cycles (50-65% with fossil fuels), delivered `power quality' and reliability. Focus is principally kept on the impact fuel cells could have on electrical grid management and control, for their voltage support and active filtering capabilities, for their response speed and for quick load connection capabilities. The cost for the moment is high, but some technology, like phosphoric acid, is in the market entry phase. Cost analysis for the main subsystems, that is fuel cell stacks, fuel processors, and power electronics and controls, indicates that the prices will be driven down to the required levels both through technology refinements and increase of production volumes. Anyhow, a new phase is beginning, where centralised power plants are facing the competition of distributed generators, like fuel cells, small gas turbines and internal combustion engines, and of other renewable energy generators, like photovoltaics and wind generators. They all are modular, dispersed throughout the utility distribution system to provide power closer to end user, and are not in competition with existing transmission and distribution systems, but they improve the systems' utilisation. The plants will initially be directly owned and operated by gas or energy distributors, and the customers could easily supersede their mistrusts by only paying for the energy they are really utilising, leaving away the worries about the investment costs and the risks of a bad operation. An `intelligent grid', delivering high quality electrical energy to millions of electrical household consumers, which, a second later, become non-polluting energy producers, appears to be giving a very relevant contribution to `the town of the future', envisaged also by the European Commission, where the quality of our lives is mainly depending on the quality of the energy.

Developing a trust-wide centralised approach to the use of TNP.

PubMed

Birchall, L; Street, L; Clift, H

2002-09-01

Use of topical negative pressure, also known as VAC, gradually increased throughout a trust following its success in a burns and plastic surgery unit. A trust-wide centralised approach set out to standardise its use and to reduce costs.

A Practical Approach to Identity on Digital Ecosystems Using Claim Verification and Trust

NASA Astrophysics Data System (ADS)

McLaughlin, Mark; Malone, Paul

Central to the ethos of digital ecosystems (DEs) is that DEs should be distributed and have no central points of failure or control. This essentially mandates a decentralised system, which poses significant challenges for identity. Identity in decentralised environments must be treated very differently to identity in traditional environments, where centralised naming, authentication and authorisation can be assumed, and where identifiers can be considered global and absolute. In the absence of such guarantees we have expanded on the OPAALS identity model to produce a general implementation for the OPAALS DE that uses a combination of identity claim verification protocols and trust to give assurances in place of centralised servers. We outline how the components of this implementation function and give an illustrated workflow of how identity issues are solved on the OPAALS DE in practice.

The Centralisation Dilemma in Educational IT

ERIC Educational Resources Information Center

Weller, Martin

2010-01-01

The trend with organisational adoption of virtual learning environments (VLE) seems to be cyclical. Initially, a decentralised approach was adopted, wherein each department implemented different learning environments or mixtures of technology, often developed in-house. The last five years have seen an increased centralisation of learning…

Governance in English VET: On the Functioning of a Fractured "System"

ERIC Educational Resources Information Center

Keep, Ewart

2015-01-01

This article explores the governance structures that cover vocational education and training (VET) in England. The English VET system is highly fragmented, complex and unstable, and has tended to oscillate between centralised command and control, and attempts at marketisation. Its governance arrangements reflect this situation. The various…

Funding for Equity and Success in English Further Education Colleges, 1998-2003

ERIC Educational Resources Information Center

Jaquette, Ozan

2009-01-01

"Incorporation" in Further Education in England and Wales centralised policy control and implemented a per-pupil funding formula that promoted equity, in that colleges were paid more for enrolling "disadvantaged" students, and for performance, in that funding was contingent on retention and student success rates. This article…

Sustainable water cycle design for urban areas.

PubMed

Maher, M; Lustig, T

2003-01-01

This paper presents the argument that the environmental, social and economic benefits of decentralised systems are such that they should present a serious alternative to centralised systems in existing and future planned urban developments. It will be shown that the combination of technical, social and regulatory factors that influenced the popularity of centralised systems has altered, and that decentralised systems should now be considered as well. The environmental, social and economic advantages and disadvantages of several sustainable watercycle case studies are examined and compared with centralised systems. The studies examined will go from large scale down to designs suitable for typical residential houses on standard urban blocks.

Higher Education Quality Assurance Organisations in Central and Eastern Europe

ERIC Educational Resources Information Center

Temple, Paul; Billing, David

2003-01-01

This paper considers the development of intermediary, or buffer, bodies dealing with quality assurance in higher education in Central and Eastern Europe over the past 10 years. It relates these developments to the context of communist-era centralisation and control, and to more recent interventions by international aid agencies. The lessons that…

School Improvement through Government Agencies: Loose or Tight Coupling?

ERIC Educational Resources Information Center

Bush, Tony

2017-01-01

In seeking to improve student outcomes, governments may choose to exercise direct control over schools, as in many centralised systems, or to provide frameworks for intermediate bodies to engage in improvement activities. One such body is the National College for School Leadership (NCSL), now the National College for Teaching and Leadership (NCTL)…

The Conceivable Benefits of Being Comprehensive--Finnish Local Education Authorities on Recognising and Controlling the Social Costs of School Choice

ERIC Educational Resources Information Center

Varjo, Janne; Kalalahti, Mira

2015-01-01

Since the 1980s, numerous education reforms have sought to dismantle centralised bureaucracies and replace them with devolved systems of schooling that emphasise parental choice and competition between increasingly diversified types of schools. Nevertheless, the "Finnish variety of "post-comprehensivism" continues to emphasise…

Higher Education Governance and University Autonomy in China

ERIC Educational Resources Information Center

Wang, Li

2010-01-01

The primary aim of the paper is to examine the scope of university autonomy and extent of government control on higher education (HE) through mapping out the complexity of centralised decentralisation of HE. It consists of three major parts. University autonomy is critically analysed in the first section by examining regulative rules and opinions…

Instructional Leadership in Centralised Systems: Evidence from Greek High-Performing Secondary Schools

ERIC Educational Resources Information Center

Kaparou, Maria; Bush, Tony

2015-01-01

This paper examines the enactment of instructional leadership (IL) in high-performing secondary schools (HPSS), and the relationship between leadership and learning in raising student outcomes and encouraging teachers' professional learning in the highly centralised context of Greece. It reports part of a comparative research study focused on…

Clinical directors' views of centralisation and commissioning of cleft services in the U.K.

PubMed

Searle, Aidan; Scott, Julia K; Sandy, Jonathan; Ness, Andrew; Waylen, Andrea

2015-01-22

To determine the views of Clinical Directors working in the United Kingdom (U.K.) Cleft Service with regard to centralisation, commissioning and impact on cleft service provision. In-depth qualitative interviews were conducted with 11 Clinical Directors representing regional cleft services. Interviews were transcribed verbatim, a coding frame was developed by two researchers and transcripts were coded using a thematic, 'interpretive' approach. Clinical Directors perceived the commissioning of cleft services in the U.K. to be dependent upon historical agreements and individual negotiation despite service centralisation. Furthermore, Clinical Directors perceived unfairness in the commissioning and funding of cleft services and reported inconsistencies in funding models and service costs that have implications for delivering an equitable cleft service with an effective Multidisciplinary Team. National Health Service (NHS) commissioning bodies can learn lessons from the centralisation of cleft care. Clinical Directors' accounts of their relationships with specialist commissioning bodies and their perspectives of funding cleft services may serve to increase parity and improve the commissioning of cleft services in the U.K.

Increasing radiology capacity within the lung cancer pathway: centralised work-based support for trainee chest X-ray reporting radiographers.

PubMed

Woznitza, Nick; Steele, Rebecca; Piper, Keith; Burke, Stephen; Rowe, Susan; Bhowmik, Angshu; Maughn, Sue; Springett, Kate

2018-05-27

Diagnostic capacity and time to diagnosis are frequently identified as a barrier to improving cancer patient outcomes. Maximising the contribution of the medical imaging workforce, including reporting radiographers, is one way to improve service delivery. An efficient and effective centralised model of workplace training support was designed for a cohort of trainee chest X-ray (CXR) reporting radiographers. A comprehensive schedule of tutorials was planned and aligned with the curriculum of a post-graduate certificate in CXR reporting. Trainees were supported via a hub and spoke model (centralised training model), with the majority of education provided by a core group of experienced CXR reporting radiographers. Trainee and departmental feedback on the model was obtained using an online survey. Fourteen trainees were recruited from eight National Health Service Trusts across London. Significant efficiencies of scale were possible with centralised support (48 h) compared to traditional workplace support (348 h). Trainee and manager feedback overall was positive. Trainees and managers both reported good trainee support, translation of learning to practice and increased confidence. Logistics, including trainee travel and release, were identified as areas for improvement. Centralised workplace training support is an effective and efficient method to create sustainable diagnostic capacity and support improvements in the lung cancer pathway. © 2018 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand Institute of Medical Radiation Technology.

Does centralisation of acute obstetric care reduce intrapartum and first-week mortality? An empirical study of over 1 million births in the Netherlands.

PubMed

Poeran, Jashvant; Borsboom, Gerard J J M; de Graaf, Johanna P; Birnie, Erwin; Steegers, Eric A P; Mackenbach, Johan P; Bonsel, Gouke J

2014-07-01

In this hypothetical analysis with retrospective cohort data (1,160,708 hospital births) we estimated outcome of centralisation of acute obstetric care, i.e., closure of 10 hospitals (out of 99) in The Netherlands. The main outcome was predicted intrapartum and first-week mortality (further referred to as neonatal mortality) for several subgroups of patients affected by two centralisation scenarios: (1) closure of the 10 smallest hospitals; (2) closure of the 10 smallest hospitals, but avoiding adjacent closures. Predictions followed from regression coefficients from a multilevel logistic regression model. Scenario 1 resulted in doubled travel time, and 10% increased mortality (210 [0.34%] to 231 [0.38%] cases). Scenario 2 showed less effect on mortality (268 [0.33%] to 259 [0.32%] cases) and travel time. Heterogeneity in hospital organisational features caused simultaneous improvement and deterioration of predicted neonatal mortality. Consequences vary for subgroups. We demonstrate that (in The Netherlands) centralisation of acute obstetric care according to the 'closure-of-the-smallest-rule' yields suboptimal outcomes. In order to develop an optimal strategy one would need to consider all positive and negative effects, e.g., organisational heterogeneity of closing and surviving hospitals, differential effects for patient subgroups, increased travel time, and financial aspects. The provided framework may be beneficial for other countries considering centralisation of acute obstetric care. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Development and evaluation of a centralised computerised registry for ureteric stents: completing the audit cycle.

PubMed

Davis, N F; Murray, G; O'Connor, T; Browne, C; MacCraith, E; Galvin, D; Mulvin, D; Quinlan, D; Lennon, G

2017-11-01

A forgotten ureteric stent may result in severe renal impairment leading to nephrectomy. To compare the effectiveness of a centralised computerised registry for monitoring ureteric stent activity with a previously established theatre stent logbook system. This prospective audit was performed in two 9-monthly intervals. During the first interval, insertion/removal of a ureteric stent was documented in a specific theatre stent logbook. In the second interval, an electronic centralised computerised registry was developed to document insertion/removal of a ureteric stent onto an accessible hospital server. A computerised traffic-light system was also developed to identify patients with an indwelling stent for >3 months. The primary outcome variable was the number of prolonged indwelling ureteric stents in both groups. During the first time interval, 188 ureteric stents were inserted and 182 (96%) were removed or changed. Six (4%) patients underwent insertion of a ureteric stent for a prolonged period of time (>6 months). This subgroup required complex endourological intervention for stent removal due to encrustation. During the second time interval, 157 ureteric stents were inserted and all patients had their stent removed or changed within 6 months. No patients in this group were lost to follow-up. This study demonstrates that a centralised computerised ureteric stent registry is superior to a conventional logbook for monitoring ureteric stent activity. We propose the introduction a centralised nationalised ureteric stent registry for eliminating the potential for prolonged or forgotten ureteric stents.

Structured output-feedback controller synthesis with design specifications

NASA Astrophysics Data System (ADS)

Hao, Yuqing; Duan, Zhisheng

2017-03-01

This paper considers the problem of structured output-feedback controller synthesis with finite frequency specifications. Based on the orthogonal space information of input matrix, an improved parameter-dependent Lyapunov function method is first proposed. Then, a two-stage construction method is designed, which depends on an initial centralised controller. Corresponding design conditions for three types of output-feedback controllers are presented in terms of unified representations. Moreover, heuristic algorithms are provided to explore the desirable controllers. Finally, the effectiveness of these proposed methods is illustrated via some practical examples.

Social Studies and Citizenship for Participation in Singapore: How One State Seeks to Influence Its Citizens

ERIC Educational Resources Information Center

Sim, Jasmine B. -Y.

2011-01-01

Singapore is an example of a country where there is centralised control of the school curriculum and where political leaders wield direct influence over citizenship education. Co-ordinated and sustained effort is made to transmit the salient knowledge and values, develop the "right" instincts and attitudes, to help students become…

Teachers as "Managed Professionals" in the Global Education Industry: The New Zealand Experience

ERIC Educational Resources Information Center

Codd, John

2005-01-01

Throughout the 1990s, the New Zealand education system was transformed by neo-liberal policies that promoted marketisation, school self-management, local governance and strong centralised forms of control and accountability. The election of a Labour-led "third way" government in 1999 has not only witnessed a continuation of the central…

Challenges and Opportunities Facing Australian Universities Caused by the Internationalisation of Chinese Higher Education

ERIC Educational Resources Information Center

Wu, Mingxuan; Yu, Ping

2006-01-01

China opened its market to the world after it entered The World Trade Organisation (WTO) at the turn of the last century. The Chinese Ministry of Education recently reviewed a series of policies about international cooperation in higher education with foreign countries in an effort to standardise their practice through centralised control. The…

Advanced pancreatic adenocarcinoma outcomes with transition from devolved to centralised care in a regional Cancer Centre.

PubMed

Faluyi, Olusola O; Connor, Joanna L; Chatterjee, Madhuchanda; Ikin, Carl; Wong, Helen; Palmer, Daniel H

2017-02-14

Previous observations suggest suboptimal 'real world' survival outcomes for advanced pancreatic adenocarcinoma. We hypothesized that centralisation of advanced pancreatic adenocarcinoma management would improve chemotherapy treatment and survival from the disease. The data was prospectively collected on all cases of advanced pancreatic adenocarcinoma reviewed through Clatterbridge Cancer Centre according to two groups; 1 October 2009-31st Dec 2010 (devolved care) or 1 January 2013-31 March 2014 (centralised care). Analysis included treatment received, 30-day chemotherapy mortality rate and overall survival (OS). More patients received chemotherapy with central care (67.0% (n=115) vs 43.0% (n=121); P=2.2 × 10 -4 ) with no difference in 30-day mortality (20.8% vs 25%; P=0.573) but reduced time to commencement of chemotherapy (18 vs 28 days, P=1.0 × 10 -3 ). More patients received second-line chemotherapy with central care (23.4% vs 1.9%, P=1.4 × 10 -4 ), while OS was significantly increased with central care (median: Five vs three months, HR 0.785, P=0.045). Exploratory analysis suggested that it was those with a poorer performance status, elderly or with metastatic disease who benefited the most from transition to central care. A centralised clinic model for advanced pancreatic cancer management resulted in prompt, safe and higher use of chemotherapy compared with devolved care. This was associated with a modest survival benefit. Prospective studies are required to validate the findings reported and the basis for improved survival with centralised care.

The Effects of Centralised and Specialised Intervention in the Early Course of Severe Unipolar Depressive Disorder: A Randomised Clinical Trial

PubMed Central

Hansen, Hanne Vibe; Christensen, Ellen Margrethe; Dam, Henrik; Gluud, Christian; Wetterslev, Jørn; Kessing, Lars Vedel

2012-01-01

Background Little is known on whether centralised and specialised combined pharmacological and psychological intervention in the early phase of severe unipolar depression improve prognosis. The aim of the present study was to assess the benefits and harms of centralised and specialised secondary care intervention in the early course of severe unipolar depression. Methods A randomised multicentre trial with central randomisation and blinding in relation to the primary outcome comparing a centralised and specialised outpatient intervention program with standard decentralised psychiatric treatment. The interventions were offered at discharge from first, second, or third hospitalisation due to a single depressive episode or recurrent depressive disorder. The primary outcome was time to readmission to psychiatric hospital. The data on re-hospitalisation was obtained from the Danish Psychiatric Central Register. The secondary and tertiary outcomes were severity of depressive symptoms according to the Major Depression Inventory, adherence to medical treatment, and satisfaction with treatment according to the total score on the Verona Service Satisfaction Scale-Affective Disorder (VSSS-A). These outcomes were assessed using questionnaires one year after discharge from hospital. Results A total of 268 patients with unipolar depression were included. There was no significant difference in the time to readmission (unadjusted hazard ratio 0.89, 95% confidence interval 0.60 to 1.32; log rank: χ2 = 0.3, d.f. = 1, p = 0.6); severity of depressive symptoms (mood disorder clinic: median 21.6, quartiles 9.7–31.2 versus standard treatment: median 20.2, quartiles 10.0–29.8; p = 0.7); or the prevalence of patients in antidepressant treatment (73.9% versus 80.0%, p = 0.2). Centralised and specialised secondary care intervention resulted in significantly higher satisfaction with treatment (131 (SD 31.8) versus 107 (SD 25.6); p<0.001). Conclusions Centralised and specialised secondary care intervention in the early course of severe unipolar depression resulted in no significant effects on time to rehospitalisation, severity of symptoms, or use of antidepressants, but increased patient satisfaction. Trial Registration ClinicalTrials.gov NCT00253071 PMID:22442673

Process modelling of biomass conversion to biofuels with combined heat and power.

PubMed

Sharma, Abhishek; Shinde, Yogesh; Pareek, Vishnu; Zhang, Dongke

2015-12-01

A process model has been developed to study the pyrolysis of biomass to produce biofuel with heat and power generation. The gaseous and solid products were used to generate heat and electrical power, whereas the bio-oil was stored and supplied for other applications. The overall efficiency of the base case model was estimated for conversion of biomass into useable forms of bio-energy. It was found that the proposed design is not only significantly efficient but also potentially suitable for distributed operation of pyrolysis plants having centralised post processing facilities for production of other biofuels and chemicals. It was further determined that the bio-oil quality improved using a multi-stage condensation system. However, the recycling of flue gases coming from combustor instead of non-condensable gases in the pyrolyzer led to increase in the overall efficiency of the process with degradation of bio-oil quality. Copyright © 2015 Elsevier Ltd. All rights reserved.

People at the centre of complex adaptive health systems reform.

PubMed

Sturmberg, Joachim P; O'Halloran, Diana M; Martin, Carmel M

2010-10-18

Health systems are increasingly recognised to be complex adaptive systems (CASs), functionally characterised by their continuing and dynamic adaptation in response to core system drivers, or attractors. The core driver for our health system (and for the health reform strategies intended to achieve it) should clearly be the improvement of people's health - the personal experience of health, regardless of organic abnormalities; we contend that a patient-centred health system requires flexible localised decision making and resource use. The prevailing trend is to use disease protocols, financial management strategies and centralised control of siloed programs to manage our health system. This strategy is suggested to be fatally flawed, as: people's health and health experience as core system drivers are inevitably pre-empted by centralised and standardised strategies; the context specificity of personal experience and the capacity of local systems are overlooked; and in line with CAS patterns and characteristics, these strategies will lead to "unintended" consequences on all parts of the system. In Australia, there is still the time and opportunity for health system redesign that truly places people and their health at the core of the system.

MyDas, an Extensible Java DAS Server

PubMed Central

Jimenez, Rafael C.; Quinn, Antony F.; Jenkinson, Andrew M.; Mulder, Nicola; Martin, Maria; Hunter, Sarah; Hermjakob, Henning

2012-01-01

A large number of diverse, complex, and distributed data resources are currently available in the Bioinformatics domain. The pace of discovery and the diversity of information means that centralised reference databases like UniProt and Ensembl cannot integrate all potentially relevant information sources. From a user perspective however, centralised access to all relevant information concerning a specific query is essential. The Distributed Annotation System (DAS) defines a communication protocol to exchange annotations on genomic and protein sequences; this standardisation enables clients to retrieve data from a myriad of sources, thus offering centralised access to end-users. We introduce MyDas, a web server that facilitates the publishing of biological annotations according to the DAS specification. It deals with the common functionality requirements of making data available, while also providing an extension mechanism in order to implement the specifics of data store interaction. MyDas allows the user to define where the required information is located along with its structure, and is then responsible for the communication protocol details. PMID:23028496

Ageing management program for the Spanish low and intermediate level waste disposal and spent fuel and high-level waste centralised storage facilities

NASA Astrophysics Data System (ADS)

Zuloaga, P.; Ordoñez, M.; Andrade, C.; Castellote, M.

2011-04-01

The generic design of the centralised spent fuel storage facility was approved by the Spanish Safety Authority in 2006. The planned operational life is 60 years, while the design service life is 100 years. Durability studies and surveillance of the behaviour have been considered from the initial design steps, taking into account the accessibility limitations and temperatures involved. The paper presents an overview of the ageing management program set in support of the Performance Assessment and Safety Review of El Cabril low and intermediate level waste (LILW) disposal facility. Based on the experience gained for LILW, ENRESA has developed a preliminary definition of the Ageing Management Plan for the Centralised Interim Storage Facility of spent Fuel and High Level Waste (HLW), which addresses the behaviour of spent fuel, its retrievability, the confinement system and the reinforced concrete structure. It includes tests plans and surveillance design considerations, based on the El Cabril LILW disposal facility.

Co-governing decentralised water systems: an analytical framework.

PubMed

Yu, C; Brown, R; Morison, P

2012-01-01

Current discourses in urban water management emphasise a diversity of water sources and scales of infrastructure for resilience and adaptability. During the last 2 decades, in particular, various small-scale systems emerged and developed so that the debate has largely moved from centralised versus decentralised water systems toward governing integrated and networked systems of provision and consumption where small-scale technologies are embedded in large-scale centralised infrastructures. However, while centralised systems have established boundaries of ownership and management, decentralised water systems (such as stormwater harvesting technologies for the street, allotment/house scales) do not, therefore the viability for adoption and/or continued use of decentralised water systems is challenged. This paper brings together insights from the literature on public sector governance, co-production and social practices model to develop an analytical framework for co-governing such systems. The framework provides urban water practitioners with guidance when designing co-governance arrangements for decentralised water systems so that these systems continue to exist, and become widely adopted, within the established urban water regime.

MyDas, an extensible Java DAS server.

PubMed

Salazar, Gustavo A; García, Leyla J; Jones, Philip; Jimenez, Rafael C; Quinn, Antony F; Jenkinson, Andrew M; Mulder, Nicola; Martin, Maria; Hunter, Sarah; Hermjakob, Henning

2012-01-01

A large number of diverse, complex, and distributed data resources are currently available in the Bioinformatics domain. The pace of discovery and the diversity of information means that centralised reference databases like UniProt and Ensembl cannot integrate all potentially relevant information sources. From a user perspective however, centralised access to all relevant information concerning a specific query is essential. The Distributed Annotation System (DAS) defines a communication protocol to exchange annotations on genomic and protein sequences; this standardisation enables clients to retrieve data from a myriad of sources, thus offering centralised access to end-users.We introduce MyDas, a web server that facilitates the publishing of biological annotations according to the DAS specification. It deals with the common functionality requirements of making data available, while also providing an extension mechanism in order to implement the specifics of data store interaction. MyDas allows the user to define where the required information is located along with its structure, and is then responsible for the communication protocol details.

[National health resources for highly specialised medicine].

PubMed

Bratlid, Dag; Rasmussen, Knut

2005-11-03

In order to monitor quality and efficiency in the use of health resources for highly specialised medicine, a National Professional Council has since 1990 advised the Norwegian health authorities on the establishing and localisation of such services. A comprehensive review of both the quality, economy and the geographical distribution of patients in each specialised service has been carried out. 33 defined national programmes were centralised to one hospital only and distributed among seven university hospitals. Eight multiregional programmes were centralised to two hospitals only and included four university hospitals. In 2001, a total of 2711 new patients were treated in these programmes. The system seems to have secured a sufficient patient flow to each programme so as to maintain quality. However, a geographically skewed distribution of patients was noted, particularly in some of the national programmes. In a small country like Norway, with 4.5 million inhabitants, a centralised monitoring of highly specialised medicine seems both rational and successful. By the same logic, however, international cooperation should probably be sought for the smallest patient groups.

Reform of prescription drug reimbursement and pricing in the German social health insurance market: a comparison of three scenarios.

PubMed

Gress, Stefan; Niebuhr, Dea; May, Uwe; Wasem, Jürgen

2007-01-01

We review regulation of two important parameters for third-party payers and manufacturers of prescription drugs: regulation of reimbursement and pricing. We find that centralised regulation of reimbursement and pricing prevails in the 15 original EU member countries (EU-15) and in European Free Trade Association (EFTA) countries. Compared with countries such as Switzerland, The Netherlands, France and England, regulation in the German social health insurance system is rather unique. First, market approval is nearly always equivalent to reimbursement. Second, manufacturers are free to determine prices but internal reference prices restrict them from actually doing so for generics and therapeutic substitutes. In order to contain rising expenditures for prescription drugs in Germany, and to set incentives for physicians to consider the costs as well as the benefits of prescriptions, three reform scenarios are feasible. The first scenario maintains centralised reimbursement and centralised pricing; the second maintains centralised reimbursement but switches to decentralised pricing (similar to social health insurance in Israel and Medicare in the US). Third-party payers would be able to negotiate with manufacturers about discounts and market shares for genetic and therapeutic substitutes. In the third scenario, pricing and reimbursement would be decentralised (similar to private health insurance in the US). We suggest that the second scenario is a viable compromise between consumer protection and a more competitive and cost-effective market for prescription drugs in German social health insurance and other similar markets for prescription drugs.

Power and Integrated Health Care: Shifting from Governance to Governmentality

PubMed Central

Rau, Asta; Fourie, Pieter; Bracke, Piet

2016-01-01

Integrated care occurs within micro, meso and macro levels of governance structures, which are shaped by complex power dynamics. Yet theoretically-led notions of power, and scrutiny of its meanings and its functioning, are neglected in the literature on integrated care. We explore an alternative approach. Following a discussion on governance, two streams of theorising power are presented: mainstream and second-stream. Mainstream concepts are based on the notion of power-as-capacity, of one agent having the capacity to influence another—so the overall idea is ‘power over?’. Studies on integrated care typically employ mainstream ideas, which yield rather limited analyses. Second-stream concepts focus on strategies and relations of power—how it is channelled, negotiated and (re)produced. These notions align well with the contemporary shift away from the idea that power is centralised, towards more fluid ideas of power as dispersed and (re)negotiated throughout a range of societal structures, networks and actors. Accompanying this shift, the notion of governance is slowly being eclipsed by that of governmentality. We propose governmentality as a valuable perspective for analysing and understanding power in integrated care. Our contribution aims to address the need for more finely tuned theoretical frameworks that can be used to guide empirical work. PMID:28435425

Regional accents. The RCN policy unit compares NHS plans across the UK.

PubMed

2003-09-01

All three NHS plans that form the modernization agenda can be characterised by three themes: Centralization Partnership Culture change. Despite the absence of a Northern Ireland plan, the issues and themes that emerge in the other three plans are prevalent in Northern Ireland too. CENTRALISATION: The tendency to centralize has led to a greater involvement of health ministers, rather than civil servants, in the day-to-day running of the health services, but ministers are preparing to hand over operational control of new policies. PARTNERSHIP: Partnership underpins many of the new structural arrangements, with an emphasis on increased inter-professional working and education, but merged health and social care structures create funding tensions. CULTURE CHANGE: Culture change focuses on creating patient-centred care and dismantling the power of the health professions, while the curbing of professional autonomy is central to enhancing and improving patients' overall experience of the NHS. The cumulative effect of these developments is likely to lead to increasing debate about the future funding, provision and accountability of the NHS as regional and country differences continue to develop.

Generic Software Architecture for Launchers

NASA Astrophysics Data System (ADS)

Carre, Emilien; Gast, Philippe; Hiron, Emmanuel; Leblanc, Alain; Lesens, David; Mescam, Emmanuelle; Moro, Pierre

2015-09-01

The definition and reuse of generic software architecture for launchers is not so usual for several reasons: the number of European launcher families is very small (Ariane 5 and Vega for these last decades); the real time constraints (reactivity and determinism needs) are very hard; low levels of versatility are required (implying often an ad hoc development of the launcher mission). In comparison, satellites are often built on a generic platform made up of reusable hardware building blocks (processors, star-trackers, gyroscopes, etc.) and reusable software building blocks (middleware, TM/TC, On Board Control Procedure, etc.). If some of these reasons are still valid (e.g. the limited number of development), the increase of the available CPU power makes today an approach based on a generic time triggered middleware (ensuring the full determinism of the system) and a centralised mission and vehicle management (offering more flexibility in the design and facilitating the long term maintenance) achievable. This paper presents an example of generic software architecture which could be envisaged for future launchers, based on the previously described principles and supported by model driven engineering and automatic code generation.

Strategies for laboratory cost containment and for pathologist shortage: centralised pathology laboratories with microwave-stimulated histoprocessing and telepathology.

PubMed

Leong, Anthony S Y; Leong, F Joel W M

2005-02-01

The imposition of laboratory cost containment, often from external forces, dictates the necessity to develop strategies to meet laboratory cost savings. In addition, the national and worldwide shortage of anatomical pathologists makes it imperative to examine our current practice and laboratory set-ups. Some of the strategies employed in other areas of pathology and laboratory medicine include improvements in staff productivity and the adoption of technological developments that reduce manual intervention. However, such opportunities in anatomical pathology are few and far between. Centralisation has been an effective approach in bringing economies of scale, the adoption of 'best practices' and the consolidation of pathologists, but this has not been possible in anatomical pathology because conventional histoprocessing takes a minimum of 14 hours and clinical turnaround time requirements necessitate that the laboratory and pathologist be in proximity and on site. While centralisation of laboratories for clinical chemistry, haematology and even microbiology has been successful in Australia and other countries, the essential requirements for anatomical pathology laboratories are different. In addition to efficient synchronised courier networks, a method of ultra-rapid tissue processing and some expedient system of returning the prepared tissue sections to the remote laboratory are essential to maintain the turnaround times mandatory for optimal clinical management. The advent of microwave-stimulated tissue processing that can be completed in 30-60 minutes and the immediate availability of compressed digital images of entire tissue sections via telepathology completes the final components of the equation necessary for making centralised anatomical pathology laboratories a reality.

Gaining efficiency by centralising the corporate business resiliency process.

PubMed

Martinez, Robert

2017-06-01

Organisations have compiled many business continuity plans over the years in response to uncontrollable events and natural disasters. As the types of threats increase, even more plans are being created. Unfortunately, many corporations do not communicate the existence of these various plans outside of their centre of excellence. Creating a centralised oversight of your business resiliency process brings many benefits, including greater awareness, a bigger pool of expertise, common terminology and reducing the chances of redundant efforts. Having an overarching corporate response plan in place makes it possible to have high-level leadership trained and ready in case an extreme event occurs.

Can ICT Reform Public Agencies?

NASA Astrophysics Data System (ADS)

Jansen, Arild; Løvdal, Einar

This study examines the reorganisation of the administration of admission to higher education in Norway, which has also included the development of a nationwide, ICT-based case handling system. This reform process was initiated out of the need to provide politicians with information for control and regulatory purposes, and the reform resulted in a centralised management information system. This system, however, has evolved into a coordinated but also partly locally delegated decision-making instrument which processes most of the applications for admission to higher education in Norway.

Medical record search engines, using pseudonymised patient identity: an alternative to centralised medical records.

PubMed

Quantin, Catherine; Jaquet-Chiffelle, David-Olivier; Coatrieux, Gouenou; Benzenine, Eric; Allaert, François-André

2011-02-01

The purpose of our multidisciplinary study was to define a pragmatic and secure alternative to the creation of a national centralised medical record which could gather together the different parts of the medical record of a patient scattered in the different hospitals where he was hospitalised without any risk of breaching confidentiality. We first analyse the reasons for the failure and the dangers of centralisation (i.e. difficulty to define a European patients' identifier, to reach a common standard for the contents of the medical record, for data protection) and then propose an alternative that uses the existing available data on the basis that setting up a safe though imperfect system could be better than continuing a quest for a mythical perfect information system that we have still not found after a search that has lasted two decades. We describe the functioning of Medical Record Search Engines (MRSEs), using pseudonymisation of patients' identity. The MRSE will be able to retrieve and to provide upon an MD's request all the available information concerning a patient who has been hospitalised in different hospitals without ever having access to the patient's identity. The drawback of this system is that the medical practitioner then has to read all of the information and to create his own synthesis and eventually to reject extra data. Faced with the difficulties and the risks of setting up a centralised medical record system, a system that gathers all of the available information concerning a patient could be of great interest. This low-cost pragmatic alternative which could be developed quickly should be taken into consideration by health authorities. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Robust distributed model predictive control of linear systems with structured time-varying uncertainties

NASA Astrophysics Data System (ADS)

Zhang, Langwen; Xie, Wei; Wang, Jingcheng

2017-11-01

In this work, synthesis of robust distributed model predictive control (MPC) is presented for a class of linear systems subject to structured time-varying uncertainties. By decomposing a global system into smaller dimensional subsystems, a set of distributed MPC controllers, instead of a centralised controller, are designed. To ensure the robust stability of the closed-loop system with respect to model uncertainties, distributed state feedback laws are obtained by solving a min-max optimisation problem. The design of robust distributed MPC is then transformed into solving a minimisation optimisation problem with linear matrix inequality constraints. An iterative online algorithm with adjustable maximum iteration is proposed to coordinate the distributed controllers to achieve a global performance. The simulation results show the effectiveness of the proposed robust distributed MPC algorithm.

The need for European professional standards and the challenges facing clinical microbiology.

PubMed

Humphreys, H; Nagy, E; Kahlmeter, G; Ruijs, G J H M

2010-06-01

Microorganisms spread across national boundaries and the professional activities of clinical (medical) microbiologists are critical in minimising their impact. Clinical microbiologists participate in many activities, e.g. diagnosis, antibiotic therapy, and there is a need for a set of professional standards for Europe with a common curriculum, to build upon the current strengths of the specialty and to facilitate the free movement of specialists within the European Union. Such standards will also better highlight the important contribution of clinical microbiologists to healthcare. There is a move to larger centralised microbiology laboratories often located off-site from an acute hospital, driven by the concentration of resources, amalgamation of services, outsourcing of diagnostics, automation, an explosion in the range of staff competencies and accreditation. Large off-site centralised microbiology laboratories are often distant to the patient and may not facilitate the early detection of microbial spread. Ultimately, the needs of patients and the public are paramount in deciding on the future direction of clinical microbiology. Potential conflicts between integration on an acute hospital site and centralisation can be resolved by a common set of professional standards and a team-based approach that puts patients first.

Fluoridation advocacy in Queensland: a long and winding road.

PubMed

Akers, Harry Francis; Foley, Michael Anthony

2012-10-01

By 1977, all Australian states and mainland territories, with the exception of Queensland, had widely implemented adjusted water fluoridation. This disparity in public health policy persisted until 2008. This study analyses the sociopolitical and socioeconomic backgrounds that underpinned the repeal of the Fluoridation of Public Water Supplies Act (1963) and its replacement with the Water Fluoridation Act (2008). The authors used a literature review and historic method. References are in the public domain. The devolution, without funding, of a discretionary local authority power to fluoridate contributed to the perennial low fluoridation status in Queensland. A window of opportunity for fluoridation advocates opened between 2003 and 2008. Now that 87% of Queenslanders have access to optimally fluoridated water, Queensland premier Anna Bligh has largely delivered on a promise made in 2007 to fluoridate water supplies across the state. The implementation of adjusted water fluoridation requires not only political stability and resolve, but also centralised authority. The last of these factors must embrace the decision, the funding and the indemnity. State control over water-related infrastructure and water treatment enhances prospects for fluoridation. The roles of opinion polls, internal advisers and departmental figures are also confirmed. Political repercussions were minimal. © 2012 FDI World Dental Federation.

A distributed model predictive control scheme for leader-follower multi-agent systems

NASA Astrophysics Data System (ADS)

Franzè, Giuseppe; Lucia, Walter; Tedesco, Francesco

2018-02-01

In this paper, we present a novel receding horizon control scheme for solving the formation problem of leader-follower configurations. The algorithm is based on set-theoretic ideas and is tuned for agents described by linear time-invariant (LTI) systems subject to input and state constraints. The novelty of the proposed framework relies on the capability to jointly use sequences of one-step controllable sets and polyhedral piecewise state-space partitions in order to online apply the 'better' control action in a distributed receding horizon fashion. Moreover, we prove that the design of both robust positively invariant sets and one-step-ahead controllable regions is achieved in a distributed sense. Simulations and numerical comparisons with respect to centralised and local-based strategies are finally performed on a group of mobile robots to demonstrate the effectiveness of the proposed control strategy.

Evaluation of the Ciba Corning Biotrack 512 coagulation monitor for the control of oral anticoagulation.

PubMed Central

Jennings, I; Luddington, R J; Baglin, T

1991-01-01

The Ciba Corning Biotrack 512 coagulation monitor requires a minimal degree of technical expertise to operate, and is already in use for near-patient testing. This study evaluated the monitor for possible use in decentralised control of oral anticoagulant treatment. The monitor compared well with Manchester Reagent, suggesting that it could be used in areas where this thromboplastin is used for centralised control. The inability of the monitor to allow for locally determined geometric mean normal prothrombin times in the calculation of the International Normalised Ratio (INR), and possibly the high International Sensitivity Index (ISI) of the thromboplastin used with the monitor, resulted in poor comparability with some other thromboplastins, particularly Thrombotest. These problems need to be addressed if the monitor is to be used for decentralised anticoagulant control. PMID:1752987

Monitoring and validation of decentralised water and wastewater systems for increased uptake.

PubMed

Sharma, A K; Cook, S; Chong, M N

2013-01-01

Decentralised water and wastewater systems are being implemented to meet growing demand for municipal services either in combination with centralised systems or as standalone systems. In Australia, there has been increased investment in decentralised water and wastewater systems in response to the capacity constraints of existing centralised systems, an extended period of below average rainfall, uncertainly in traditional water sources due to potential climate change impacts, and the need to reduce the environmental impact of urban development. The implementation of decentralised water systems as a mainstream practice at different development scales is impeded by the knowledge gaps on their actual performance in a range of development types and settings. As the wide-spread uptake of these approaches in modern cities is relatively new compared to centralised approaches, there is limited information available on their planning, design, implementation, reliability and robustness. This paper presents a number of case studies where monitoring studies are under way to validate the performance of decentralised water and wastewater systems. The results from these case studies show the yield and reliability of these decentralised systems, as well as the associated energy demand and ecological footprint. The outputs from these case studies, and other monitoring studies, are important in improving decentralised system design guidelines and developing industry wide management norms for the operation and maintenance of decentralised systems.

Environmental and economic analyses of waste disposal options for traditional markets in Indonesia.

PubMed

Aye, Lu; Widjaya, E R

2006-01-01

Waste from traditional markets in Indonesia is the second largest stream of municipal solid waste after household waste. It has a higher organic fraction and may have greater potential to be managed on a business scale compared to household wastes. The attributed reason is that in general the wastes generated from traditional markets are more uniform, more concentrated and less hazardous than waste from other sources. This paper presents the results of environmental and economic assessments to compare the options available for traditional market waste disposal in Indonesia. The options compared were composting in labour intensive plants, composting in a centralised plant that utilised a simple wheel loader, centralised biogas production and landfill for electricity production. The current open dumping practice was included as the baseline case. A life cycle assessment (LCA) was used for environmental analysis. All options compared have lower environmental impacts than the current practice of open dumping. The biogas production option has the lowest environmental impacts. A cost-benefit analysis, which considered greenhouse gas savings, was used for the economic assessment. It was found that composting at a centralised plant is the most economically feasible option under the present Indonesian conditions. The approach reported in this study could be applied for 'a pre-feasibility first cut comparison' that includes environmental aspects in a decision-making framework for developing countries even though European emission factors were used.

Telemanipulation of cooperative robots: a case of study

NASA Astrophysics Data System (ADS)

Pliego-Jiménez, Javier; Arteaga-Pérez, Marco

2018-06-01

This article addresses the problem of dexterous robotic grasping by means of a telemanipulation system composed of a single master and two slave robot manipulators. The slave robots are analysed as a cooperative system where it is assumed that the robots can push but not pull the object. In order to achieve a stable rigid grasp, a centralised adaptive position-force control algorithm for the slave robots is proposed. On the other hand, a linear velocity observer for the master robot is developed to avoid numerical differentiation. A set of experiments with different human operators were carried out to show the good performance and capabilities of the proposed control-observer algorithm. In addition, the dynamic model and closed-loop dynamics of the telemanipulation is presented.

Centralised 3D printing in the NHS: a radiological review.

PubMed

Eley, K A

2017-04-01

In recent years, three-dimensional (3D) printing has seen an explosion of interest fuelled by improvements in technology and associated reduction in costs. The literature is replete with novel medical applications of custom anatomical models, prostheses, and surgical guides. Although the fundamental core of 3D printing lies in image manipulation, the driving force in many National Health Service (NHS) trusts has come from individual surgical specialties with 3D printers independently run and confined to respective departments. In this review of 3D printing, experience of establishing a new centralised 3D-printing service within an NHS hospital trust is reported, focusing on the requirements and challenges of such an endeavour. Copyright © 2017 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Environmental and economic analyses of waste disposal options for traditional markets in Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aye, Lu; Widjaya, E.R.

2006-07-01

Waste from traditional markets in Indonesia is the second largest stream of municipal solid waste after household waste. It has a higher organic fraction and may have greater potential to be managed on a business scale compared to household wastes. The attributed reason is that in general the wastes generated from traditional markets are more uniform, more concentrated and less hazardous than waste from other sources. This paper presents the results of environmental and economic assessments to compare the options available for traditional market waste disposal in Indonesia. The options compared were composting in labour intensive plants, composting in amore » centralised plant that utilised a simple wheel loader, centralised biogas production and landfill for electricity production. The current open dumping practice was included as the baseline case. A life cycle assessment (LCA) was used for environmental analysis. All options compared have lower environmental impacts than the current practice of open dumping. The biogas production option has the lowest environmental impacts. A cost-benefit analysis, which considered greenhouse gas savings, was used for the economic assessment. It was found that composting at a centralised plant is the most economically feasible option under the present Indonesian conditions. The approach reported in this study could be applied for 'a pre-feasibility first cut comparison' that includes environmental aspects in a decision-making framework for developing countries even though European emission factors were used.« less

Photovoltaic powered ultraviolet and visible light-emitting diodes for sustainable point-of-use disinfection of drinking waters.

PubMed

Lui, Gough Yumu; Roser, David; Corkish, Richard; Ashbolt, Nicholas; Jagals, Paul; Stuetz, Richard

2014-09-15

For many decades, populations in rural and remote developing regions will be unable to access centralised piped potable water supplies, and indeed, decentralised options may be more sustainable. Accordingly, improved household point-of-use (POU) disinfection technologies are urgently needed. Compared to alternatives, ultraviolet (UV) light disinfection is very attractive because of its efficacy against all pathogen groups and minimal operational consumables. Though mercury arc lamp technology is very efficient, it requires frequent lamp replacement, involves a toxic heavy metal, and their quartz envelopes and sleeves are expensive, fragile and require regular cleaning. An emerging alternative is semiconductor-based units where UV light emitting diodes (UV-LEDs) are powered by photovoltaics (PV). Our review charts the development of these two technologies, their current status, and challenges to their integration and POU application. It explores the themes of UV-C-LEDs, non-UV-C LED technology (e.g. UV-A, visible light, Advanced Oxidation), PV power supplies, PV/LED integration and POU suitability. While UV-C LED technology should mature in the next 10 years, research is also needed to address other unresolved barriers to in situ application as well as emerging research opportunities especially UV-A, photocatalyst/photosensitiser use and pulsed emission options. Copyright © 2014 Elsevier B.V. All rights reserved.

Belgium: risk adjustment and financial responsibility in a centralised system.

PubMed

Schokkaert, Erik; Van de Voorde, Carine

2003-07-01

Since 1995 Belgian sickness funds are partially financed through a risk adjustment system and are held partially financially responsible for the difference between their actual and their risk-adjusted expenditures. However, they did not get the necessary instruments for exerting a real influence on expenditures and the health insurance market has not been opened for new entrants. At the same time the sickness funds have powerful tools for risk selection, because they also dominate the market for supplementary health insurance. The present risk-adjustment system is based on the results of a regression analysis with aggregate data. The main proclaimed purpose of this system is to guarantee a fair treatment to all the sickness funds. Until now the danger of risk selection has not been taken seriously. Consumer mobility has remained rather low. However, since the degree of financial responsibility is programmed to increase in the near future, the potential profits from cream skimming will increase.

Critical review on the Environmental Risk Assessment of medicinal products for human use in the centralised procedure.

PubMed

Caneva, Laura; Bonelli, Milton; Papaluca-Amati, Marisa; Vidal, Jean-Marc

2014-04-01

In this article we analyse the Environmental Risk Assessment (ERA) of 59 medicinal products for human use authorised in the EU through the centralised procedure between 2011 and 2012, to establish whether company submissions are compliant with the European Medicines Agency (EMA) guideline and complete in terms of data and study reports provided. The most frequent questions raised by EU regulatory authorities are described, together with an evaluation of the presence and quality of ERA-related information in published regulatory assessment documents. The results of this review show recent improvement in ERA-related data presented in regulatory assessment documents available to the public while also highlighting a need to develop further guidance on environmental issues in order to assist applicants improve their ERA dossiers and overcome current shortcomings. Copyright © 2014 Elsevier Inc. All rights reserved.

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches.

PubMed

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P; Berg, Marc

2007-05-16

To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one "centralised" and the other "decentralised" have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes.

Implementation of a national, nurse-led telephone health service in Scotland: assessing the consequences for remote and rural localities.

PubMed

Roberts, A; Heaney, D; Haddow, G; O'Donnell, C A

2009-01-01

Internationally, nurse-led models of telephone triage have become commonplace in unscheduled healthcare delivery. Various existing models have had a positive impact on the delivery of healthcare services, often reducing the demand on accident and emergency departments and staff workload 'out of hours'. Our objective was to assess whether a model of centralised nurse telephone triage (NHS 24, introduced in Scotland in 2001) was appropriate for remote and rural areas. In this qualitative study the views and perspectives of health professionals across Scotland are explored. Thirty-five participants were purposively selected for interviews during 2005. Two types of interview were conducted: detailed, semi-structured, face-to-face interviews with key stakeholders of NHS 24; and briefer telephone interviews with partners from NHS Boards across Scotland. A constant comparative approach was taken to analysis. Ethical approval for the study was obtained from the Scottish Multi-site Research Ethics Committee. The findings are comparable with other research studies of new service developments in remote and rural health care. The rigidity of the centralised triage model introduced, the need to understand variation of health service delivery, and the importance of utilising local professional knowledge were all key issues affecting performance. Remote and rural complexities need to be considered when designing new healthcare services. It is suggested that new health service designs are 'proofed' for remote and rural complexities. This study highlights that a centralised nurse-led telephone triage model was inappropriate for remote and rural Scotland, and may not be appropriate for all geographies and circumstances.

Centralisation of services for children with cleft lip or palate in England: a study of hospital episode statistics

PubMed Central

2012-01-01

Background In 1998, a process of centralisation was initiated for services for children born with a cleft lip or palate in the UK. We studied the timing of this process in England according to its impact on the number of hospitals and surgeons involved in primary surgical repairs. Methods All live born patients with a cleft lip and/or palate born between April 1997 and December 2008 were identified in Hospital Episode Statistics, the database of admissions to English National Health Service hospitals. Children were included if they had diagnostic codes for a cleft as well as procedure codes for a primary surgical cleft repair. Children with codes indicating additional congenital anomalies or syndromes were excluded as their additional problems could have determined when and where they were treated. Results We identified 10,892 children with a cleft. 21.0% were excluded because of additional anomalies or syndromes. Of the remaining 8,606 patients, 30.4% had a surgical lip repair only, 41.7% a palate repair only, and 28.0% both a lip and palate repair. The number of hospitals that carried out these primary repairs reduced from 49 in 1997 to 13, with 11 of these performing repairs on at least 40 children born in 2008. The number of surgeons responsible for repairs reduced from 98 to 26, with 22 performing repairs on at least 20 children born in 2008. In the same period, average length of hospital stay reduced from 3.8 to 3.0 days for primary lip repairs, from 3.8 to 3.3 days for primary palate repairs, and from 4.6 to 2.6 days for combined repairs with no evidence for a change in emergency readmission rates. The speed of centralisation varied with the earliest of the nine regions completing it in 2001 and the last in 2007. Conclusions Between 1998 and 2007, cleft services in England were centralised. According to a survey among patients’ parents, the quality of cleft care improved in the same period. Surgical care became more consistent with current recommendations. However, key outcomes, including facial appearance and speech, can only be assessed many years after the initial surgical treatment. PMID:22682355

Governance versus government: drug consumption rooms in Australia and the UK.

PubMed

Zampini, Giulia Federica

2014-09-01

To evaluate, through a case study, the extent to which elements of governance and elements of government are influential in determining the implementation or non-implementation of a drugs intervention. Comparative analysis of the case of a drug consumption room in the UK (England) and Australia (New South Wales), including 16 semi-structured interviews with key stakeholders and analysis of relevant documents according to characteristic features of governance and government (power decentralisation, power centralisation, independent self-organising policy networks, use of evidence, top-down steering/directing, legislation). Characteristic features of both governance and government are found in the data. Elements of governance are more prominent in New South Wales, Australia than in England, UK, where government prevails. Government is seen as the most important actor at play in the making, or absence, of drug consumption rooms. Both governance and government are useful frameworks in conceptualising the policy process. The governance narrative risks overlooking the importance of traditional government structures. In the case of drug consumption rooms in the UK and Australia, a focus on government is shown to have been crucial in determining whether the intervention was implemented. Copyright © 2014 Elsevier B.V. All rights reserved.

Framing in policy processes: a case study from hospital planning in the National Health Service in England.

PubMed

Jones, Lorelei; Exworthy, Mark

2015-01-01

This paper reports from an ethnographic study of hospital planning in England undertaken between 2006 and 2009. We explored how a policy to centralise hospital services was espoused in national policy documents, how this shifted over time and how it was translated in practice. We found that policy texts defined hospital planning as a clinical issue and framed decisions to close hospitals or hospital departments as based on the evidence and necessary to ensure safety. We interpreted this framing as a rhetorical strategy for implementing organisational change in the context of community resistance to service closure and a concomitant policy emphasising the importance of public and patient involvement in planning. Although the persuasive power of the framing was limited, a more insidious form of power was identified in the way the framing disguised the political nature of the issue by defining it as a clinical problem. We conclude by discussing how the clinical rationale constrains public participation in decisions about the delivery and organisation of healthcare and restricts the extent to which alternative courses of action can be considered. Copyright © 2014 Elsevier Ltd. All rights reserved.

Centralisation for resection of the pancreatic head: A comparison of operative factors and early outcomes during the evolving unit and tertiary unit phases at a UK institution.

PubMed

Kostalas, M; Nageswaran, H; Froghi, S; Riga, A; Kumar, R; Menezes, N; Worthington, T R; Karanjia, N D

2017-08-19

To assess impact of centralisation on patients undergoing pancreatic head resections at a tertiary hepatobiliary (HPB) centre in the UK. Data were analysed from a prospectively maintained database from 1998 to 2014 on all patients undergoing pancreatic head resections. Two specific time periods were defined; these were the evolving unit phase (EU) from 1998 to 2009 and finally the established tertiary unit phase (TU) from 2010 to 2014. Peri-operative factors and post-operative outcomes were analysed. 395 resections were undertaken during the study period. Following establishment of our tertiary HPB unit, the volume of resections undertaken increased greater than three-fold with an associated increase in case-complexity (p = 0.004). Operating time was found to increase in the TU phase compared with EU phase (p=>0.0005) whilst there was no significant difference in the rate of peri-operative transfusion, or in post-operative morbidity rates. There was a significant reduction in the post-operative length of stay in the TU phase (p = 0.003) with a significantly higher proportion of patients being discharged within 9 days of their procedure (p=<0.0005). There was also a significant reduction in 30-day post-operative mortality in the TU phase (0.5%) compared with the EU phase (3%) (p = 0.029). Data from our series of 395 cases suggests that centralisation of pancreatic cancer services to a tertiary centre does result in improved patient outcomes. The benefits of a multi-disciplinary and specialist HPB service results in a high volume, high quality unit with improved patient outcomes. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Setup, Validation and Quality Control of a Centralized WGS laboratory - Lessons Learned.

PubMed

Arnold, Cath; Edwards, Kirstin; Desai, Meeta; Platt, Steve; Green, Jonathan; Conway, David

2018-04-25

Routine use of Whole Genome analysis for infectious diseases can be used to enlighten various scenarios pertaining to Public Health, including identification of microbial pathogens; relating individual cases to an outbreak of infectious disease; establishing an association between an outbreak of food poisoning and a specific food vehicle; inferring drug susceptibility; source tracing of contaminants and study of variations in the genome affect pathogenicity/virulence. We describe the setup, validation and ongoing verification of a centralised WGS laboratory to carry out the sequencing for these public health functions for the National Infection Services, Public Health England in the UK. The performance characteristics and Quality Control metrics measured during validation and verification of the entire end to end process (accuracy, precision, reproducibility and repeatability) are described and include information regarding the automated pass and release of data to service users without intervention. © Crown copyright 2018.

Access Protocol For An Industrial Optical Fibre LAN

NASA Astrophysics Data System (ADS)

Senior, John M.; Walker, William M.; Ryley, Alan

1987-09-01

A structure for OSI levels 1 and 2 of a local area network suitable for use in a variety of industrial environments is reported. It is intended that the LAN will utilise optical fibre technology at the physical level and a hybrid of dynamically optimisable token passing and CSMA/CD techniques at the data link (IEEE 802 medium access control - logical link control) level. An intelligent token passing algorithm is employed which dynamically allocates tokens according to the known upper limits on the requirements of each device. In addition a system of stochastic tokens is used to increase efficiency when the stochastic traffic is significant. The protocol also allows user-defined priority systems to be employed and is suitable for distributed or centralised implementation. The results of computer simulated performance characteristics for the protocol using a star-ring topology are reported which demonstrate its ability to perform efficiently with the device and traffic loads anticipated within an industrial environment.

Engaging Change

ERIC Educational Resources Information Center

Gaskell, Craig; Dickinson, Kate

2012-01-01

This article tells the story of a conversation-based review process and subsequent re-structuring that has transformed the supporting administrative infrastructure at the Scarborough campus of the University of Hull into a highly centralised model, breaking long-standing organisational silos and putting the student perspective into central focus.…

Tertiary Teachers and Student Evaluations: Never the Twain Shall Meet?

ERIC Educational Resources Information Center

Stein, Sarah J.; Spiller, Dorothy; Terry, Stuart; Harris, Trudy; Deaker, Lynley; Kennedy, Jo

2013-01-01

Internationally, centralised systems of student evaluation have become normative practice in higher education institutions, providing data for monitoring teaching quality and for teacher professional development. While extensive research has been done on student evaluations, there is less research-based evidence about teachers' perceptions of and…

Collaboration Nation: The Building of the Welsh Repository Network

ERIC Educational Resources Information Center

Knowles, Jacqueline

2010-01-01

Purpose: The purpose of this paper is to disseminate information about the Welsh Repository Network (WRN), innovative work being undertaken to build an integrated network of institutional digital repositories. A collaborative approach, in particular through the provision of centralised technical and organisational support, has demonstrated…

Transformation and Framework of Teacher Professional Development in Taiwan

ERIC Educational Resources Information Center

Huang, Bo-Ruey

2016-01-01

This article describes the situation of teacher professional development in Taiwan, including the history and the framework of teacher professional development. With diversification of teacher education systems and institutions, teacher professional development in Taiwan is undergoing a gradual governance shift from the model of centralised state…

Robust scalable stabilisability conditions for large-scale heterogeneous multi-agent systems with uncertain nonlinear interactions: towards a distributed computing architecture

NASA Astrophysics Data System (ADS)

Manfredi, Sabato

2016-06-01

Large-scale dynamic systems are becoming highly pervasive in their occurrence with applications ranging from system biology, environment monitoring, sensor networks, and power systems. They are characterised by high dimensionality, complexity, and uncertainty in the node dynamic/interactions that require more and more computational demanding methods for their analysis and control design, as well as the network size and node system/interaction complexity increase. Therefore, it is a challenging problem to find scalable computational method for distributed control design of large-scale networks. In this paper, we investigate the robust distributed stabilisation problem of large-scale nonlinear multi-agent systems (briefly MASs) composed of non-identical (heterogeneous) linear dynamical systems coupled by uncertain nonlinear time-varying interconnections. By employing Lyapunov stability theory and linear matrix inequality (LMI) technique, new conditions are given for the distributed control design of large-scale MASs that can be easily solved by the toolbox of MATLAB. The stabilisability of each node dynamic is a sufficient assumption to design a global stabilising distributed control. The proposed approach improves some of the existing LMI-based results on MAS by both overcoming their computational limits and extending the applicative scenario to large-scale nonlinear heterogeneous MASs. Additionally, the proposed LMI conditions are further reduced in terms of computational requirement in the case of weakly heterogeneous MASs, which is a common scenario in real application where the network nodes and links are affected by parameter uncertainties. One of the main advantages of the proposed approach is to allow to move from a centralised towards a distributed computing architecture so that the expensive computation workload spent to solve LMIs may be shared among processors located at the networked nodes, thus increasing the scalability of the approach than the network size. Finally, a numerical example shows the applicability of the proposed method and its advantage in terms of computational complexity when compared with the existing approaches.

Instructional Leadership in Greek and English Outstanding Schools

ERIC Educational Resources Information Center

Kaparou, Maria; Bush, Tony

2016-01-01

Purpose: The purpose of this paper is to examine instructional leadership (IL) in outstanding secondary schools within a centralised (Greece) and a partially decentralised (England) education context. Design/methodology/approach: Since the purpose of the study is exploratory, the researchers adopt a qualitative approach, employing a series of four…

Private Higher Education in Russia: Capacity for Innovation and Investment

ERIC Educational Resources Information Center

Geroimenko, Vladimir A.; Kliucharev, Grigori A.; Morgan, W. John

2012-01-01

This article considers the potential role of private institutions in the development of Russian higher education. After decades of a government centralised higher education system, there is a clear trend towards the privatisation of education institutions and the diversification of education practices. Some commentators consider this to indicate…

Web 2.0 Strategy in Libraries and Information Services

ERIC Educational Resources Information Center

Byrne, Alex

2008-01-01

Web 2.0 challenges libraries to change from their predominantly centralised service models with integrated library management systems at the hub. Implementation of Web 2.0 technologies and the accompanying attitudinal shifts will demand reconceptualisation of the nature of library and information service around a dynamic, ever changing, networked,…

Dimensions of Effectiveness and Efficiency: A Case Study on Industry-School Partnerships

ERIC Educational Resources Information Center

Pillay, Hitendra; Watters, James J.; Hoff, Lutz; Flynn, Matthew

2014-01-01

Internationally, the delivery of vocational education and training is being challenged by increasing skills shortages in certain industries and/or rapidly changing skill requirements. To respond to this challenge, rigid and centralised state bureaucracies are increasingly adopting partnerships between schools and industry as a strategy to…

From Sure Start to Children's Centres: Capturing the Erosion of Social Capital

ERIC Educational Resources Information Center

Bagley, Carl

2011-01-01

Discourses within the UK Labour government's welfare policy agenda have consistently featured a reformulation of programmatic governance away from both centralised hierarchies and neo-liberal markets to a social policy strategy that highlights a commitment to inclusive partnership working. Significantly, this process of meaningful social…

The Anti-Gender Movement in Europe and the Educational Process in Public Schools

ERIC Educational Resources Information Center

Kuhar, Roman; Zobec, Aleš

2017-01-01

Mass protests across Europe against marriage equality, reproductive rights, gender mainstreaming and sexual education have centralised in the past few years around so-called "gender theory." This theory is explained as a new threat to the "traditional family" and "natural masculinity and femininity," as it allegedly…

Understanding the Graduate College Experience: Perceptual Differences by Degree Type, Point-in-Program and Disciplinary Subgroups

ERIC Educational Resources Information Center

Hardré, Patricia L.; Hackett, Shannon M.

2015-01-01

This study investigated graduate students' perceptions of their graduate college experiences. Participants were 1704 masters and doctoral students across colleges and disciplines at a research university. They completed questionnaires reporting their perceptions of their teaching and advising faculty, academic programs, centralised services,…

Perceptions of Higher Education Quality at Three Universities in Vietnam

ERIC Educational Resources Information Center

Pham, Huong Thi; Starkey, Louise

2016-01-01

Purpose: Vietnam is experiencing rapid expansion in the provision of higher education that requires quality assurance appropriate for the Vietnamese-centralised Confucian cultural context. This paper aims to examine the concept of quality from the perspectives of academic leaders, quality assurance members and academics at three higher education…

Adaptive architectures for resilient control of networked multiagent systems in the presence of misbehaving agents

NASA Astrophysics Data System (ADS)

Torre, Gerardo De La; Yucelen, Tansel

2018-03-01

Control algorithms of networked multiagent systems are generally computed distributively without having a centralised entity monitoring the activity of agents; and therefore, unforeseen adverse conditions such as uncertainties or attacks to the communication network and/or failure of agent-wise components can easily result in system instability and prohibit the accomplishment of system-level objectives. In this paper, we study resilient coordination of networked multiagent systems in the presence of misbehaving agents, i.e. agents that are subject to exogenous disturbances that represent a class of adverse conditions. In particular, a distributed adaptive control architecture is presented for directed and time-varying graph topologies to retrieve a desired networked multiagent system behaviour. Apart from the existing relevant literature that make specific assumptions on the graph topology and/or the fraction of misbehaving agents, we show that the considered class of adverse conditions can be mitigated by the proposed adaptive control approach that utilises a local state emulator - even if all agents are misbehaving. Illustrative numerical examples are provided to demonstrate the theoretical findings.

[Extreme types - a comparison of public health systems in Thuringia and the Warthegau].

PubMed

Vossen, J

2013-11-01

Special policing measures in Nazi Germany required centralisation in the public health service which was mainly achieved through the Law for the Unification of Municipal and State Health Administration in 1934. The long-term aim for public health officers was now hereditary and racial welfare. Several following legal regulations contributed to the implementation of a specific national-socialist health and social policy on the basis of racial hygiene and gave immense power to the health officers. Especially with the Law for the Prevention of Hereditarily Sick Offspring, compulsory sterilisation was legalised and resulted in about 400,000 victims up to 1945. The central force in this new system was the public health office. The most extreme variation of public health administration was launched in Thuringia, where professional powers and state authority implemented an extensive institutional machinery which managed to reinforce Nazi population policy almost to perfection. After the invasion of western Poland the Germans built up an inhumane regime in the annexed and occupied regions, persecuted and murdered the Polish population and tried to exterminate the Jewish people. Here the health officers of the Warthegau could promote a rigorously racial dominated population policy of segregation. © Georg Thieme Verlag KG Stuttgart · New York.

Assessment Profile of Malaysia: High-Stakes External Examinations Dominate

ERIC Educational Resources Information Center

Ong, Saw Lan

2010-01-01

Malaysia is a federation of 13 states located in South-east Asia. The country consists of two geographical regions; Peninsular Malaysia (also known as West Malaysia) and Malaysian Borneo (also known as East Malaysia) separated by the South China Sea. The educational administration in Malaysia is highly centralised with four hierarchical levels;…

Tick off to Take off: The Pre-Departure Guide

ERIC Educational Resources Information Center

Arthur, Erica

2009-01-01

"Tick Off to Take Off (TOTTO)" is an online pre-departure guide for UK undergraduates intending to study abroad. It aims to simplify the application process, centralise information, increase efficiency and improve retention rates. TOTTO responds to the changing climate surrounding study abroad in UK universities and offers one way to…

A Paradigm Shift in Education: Pedagogy, Standpoint and Ethics of Care

ERIC Educational Resources Information Center

MacGill, Bindi

2016-01-01

This paper explores how ethics of care informs pedagogical practices in schools. Ethics of care is located within social constructivism that centralises a student centred approach to learning. In so doing, teachers engage students in learning within a relationship of reciprocity. This paper examines the ways in which social reproduction is…

Raising Standards 1988 to the Present: A New Performance Policy Era?

ERIC Educational Resources Information Center

Hoskins, Kate

2012-01-01

This article explores the context of the period following the Education Reform Act 1988 in terms of the efforts by successive governments to raise academic standards. These attempts are illustrated by discussion of the impact of the introduction of market forces and parental choice, a centralised National Curriculum and associated assessment…

Investigating Estonian Teachers' Expectations for the General Education Curriculum

ERIC Educational Resources Information Center

Viirpalu, Piret; Krull, Edgar; Mikser, Rain

2014-01-01

Finding a balance between a centralised and decentralised curricular policy for general education and seeing teachers as autonomous agents of curriculum development is a recurrent issue in many countries. Radical reforms bring about the need to investigate whether and to what extent different parties - and first of all, teachers - are ready to…

Learning from Anangu Histories: Population Centralisation and Decentralisation Influences and the Provision of Schooling in Tri-State Remote Communities

ERIC Educational Resources Information Center

Osborne, Sam

2015-01-01

Remote Australian Aboriginal and Torres Strait Islander schools and communities are diverse and complex sites shaped by contrasting geographies, languages, histories and cultures, including historical and ongoing relationships with colonialism, and connected yet contextually unique epistemologies, ontologies and cosmologies. This paper explores…

The Third Sector and the Governance of Education

ERIC Educational Resources Information Center

Stephenson, Maxine

2013-01-01

This article explores the nature, scope and form of third-sector involvement in education in New Zealand as demonstrated through a comparison of its relationship with the state in two distinct periods of state and educational development. It begins with an analysis of the period of state expansion from crown colony to centralised administration in…

Standardising the Chinese Language in Singapore: Issues of Policy and Practice

ERIC Educational Resources Information Center

Shang, Guowen; Zhao, Shouhui

2017-01-01

The selection of standards and norms constitutes the first and most important step for language standardisation. In this paper, we examine the standard establishment for Huayu (or Singapore Mandarin), a new Chinese variety that has emerged in Singapore as a result of centralised planning and inter-linguistic contact. Huayu is the officially…

Factors Affecting the Adoption of an E-Assessment System

ERIC Educational Resources Information Center

McCann, Ann L.

2010-01-01

A case study was conducted in 2006-07 to explore how one US campus implemented a centralised e-assessment system. The study specifically measured the extent of adoption by faculty members, identified their reasons for adoption and evaluated the impact on teaching and learning. The purposes of the system, entitled researching learning (REAL, a…

"Cruel Optimism": Teacher Attachment to Professionalism in an Era of Performativity

ERIC Educational Resources Information Center

Moore, Alex; Clarke, Matthew

2016-01-01

This study provides a critical exploration of the way teachers' attachment to notions of professionalism may facilitate a process whereby teachers find themselves obliged to enact centralised and local education policies that they do not believe in but are required to implement. The study argues that professionalism involves an entanglement of…

Hepatitis B: how many patients are counselled on transmission prevention and how many contacts are offered vaccination?

PubMed

Miles, L; Roberts, R; Casey, D; Roberts, C; Williams, S

2002-06-01

The proportion of cases of hepatitis B who receive counselling on how to prevent transmission and for whom at-risk contacts are offered vaccination is low. A centralised arrangement under the management of the local CCDC can provide a comprehensive contract tracing service.

Total centralisation and optimisation of an oncology management suite via Citrix®

NASA Astrophysics Data System (ADS)

James, C.; Frantzis, J.; Ripps, L.; Fenton, P.

2014-03-01

The management of patient information and treatment planning is traditionally an intra-departmental requirement of a radiation oncology service. Epworth Radiation Oncology systems must support the transient nature of Visiting Medical Officers (VMOs). This unique work practice created challenges when implementing the vision of a completely paperless solution that allows for a responsive and efficient service delivery. ARIA® and EclipseTM (Varian Medical Systems, Palo Alto, CA, USA) have been deployed across four dedicated Citrix® (Citrix Systems, Santa Clara, CA, USA) servers allowing VMOs to access these applications remotely. A range of paperless solutions were developed within ARIA® to facilitate clinical and organisational management whilst optimising efficient work practices. The IT infrastructure and paperless workflow has enabled VMOs to securely access the VarianTM (Varian Medical Systems, Palo Alto, CA, USA) oncology software and experience full functionality from any location on multiple devices. This has enhanced access to patient information and improved the responsiveness of the service. Epworth HealthCare has developed a unique solution to enable remote access to a centralised oncology management suite, while maintaining a secure and paperless working environment.

A Market-Based Approach to Multi-factory Scheduling

NASA Astrophysics Data System (ADS)

Vytelingum, Perukrishnen; Rogers, Alex; MacBeth, Douglas K.; Dutta, Partha; Stranjak, Armin; Jennings, Nicholas R.

In this paper, we report on the design of a novel market-based approach for decentralised scheduling across multiple factories. Specifically, because of the limitations of scheduling in a centralised manner - which requires a center to have complete and perfect information for optimality and the truthful revelation of potentially commercially private preferences to that center - we advocate an informationally decentralised approach that is both agile and dynamic. In particular, this work adopts a market-based approach for decentralised scheduling by considering the different stakeholders representing different factories as self-interested, profit-motivated economic agents that trade resources for the scheduling of jobs. The overall schedule of these jobs is then an emergent behaviour of the strategic interaction of these trading agents bidding for resources in a market based on limited information and their own preferences. Using a simple (zero-intelligence) bidding strategy, we empirically demonstrate that our market-based approach achieves a lower bound efficiency of 84%. This represents a trade-off between a reasonable level of efficiency (compared to a centralised approach) and the desirable benefits of a decentralised solution.

Coordinating two-period ordering and advertising policies in a dynamic market with stochastic demand

NASA Astrophysics Data System (ADS)

Wang, Junping; Wang, Shengdong; Min, Jie

2015-03-01

In this paper, we study the optimal two-stage advertising and ordering policies and the channel coordination issues in a supply chain composed of one manufacturer and one retailer. The manufacturer sells a short-life-cycle product through the retailer facing stochastic demand in dynamic markets characterised by price declines and product obsolescence. Following a two-period newsvendor framework, we develop two members' optimal ordering and advertising models under both the centralised and decentralised settings, and present the closed-form solutions to the developed models as well. Moreover, we design a two-period revenue-sharing contract, and develop sufficient conditions such that the channel coordination can be achieved and a win-win outcome can be guaranteed. Our analysis suggests that the centralised decision creates an incentive for the retailer to increase the advertising investments in two periods and put the purchase forward, but the decentralised decision mechanism forces the retailer to decrease the advertising investments in two periods and postpone/reduce its purchase in the first period. This phenomenon becomes more evident when demand variability is high.

Lessons learned from the Siting Process of an Interim Storage Facility in Spain - 12024

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamolla, Meritxell Martell

2012-07-01

On 29 December 2009, the Spanish government launched a site selection process to host a centralised interim storage facility for spent fuel and high-level radioactive waste. It was an unprecedented call for voluntarism among Spanish municipalities to site a controversial facility. Two nuclear municipalities, amongst a total of thirteen municipalities from five different regions, presented their candidatures to host the facility in their territories. For two years the government did not make a decision. Only in November 30, 2011, the new government elected on 20 November 2011 officially selected a non-nuclear municipality, Villar de Canas, for hosting this facility. Thismore » paper focuses on analysing the factors facilitating and hindering the siting of controversial facilities, in particular the interim storage facility in Spain. It demonstrates that involving all stakeholders in the decision-making process should not be underestimated. In the case of Spain, all regional governments where there were candidate municipalities willing to host the centralised interim storage facility, publicly opposed to the siting of the facility. (author)« less

Towards low carbon society in Iskandar Malaysia: Implementation and feasibility of community organic waste composting.

PubMed

Bong, Cassendra Phun-Chien; Goh, Rebecca Kar Yee; Lim, Jeng-Shiun; Ho, Wai Shin; Lee, Chew-Tin; Hashim, Haslenda; Abu Mansor, Nur Naha; Ho, Chin Siong; Ramli, Abdul Rahim; Takeshi, Fujiwara

2017-12-01

Rapid population growth and urbanisation have generated large amount of municipal solid waste (MSW) in many cities. Up to 40-60% of Malaysia's MSW is reported to be food waste where such waste is highly putrescible and can cause bad odour and public health issue if its disposal is delayed. In this study, the implementation of community composting in a village within Iskandar Malaysia is presented as a case study to showcase effective MSW management and mitigation of GHG emission. The selected village, Felda Taib Andak (FTA), is located within a palm oil plantation and a crude palm oil processing mill. This project showcases a community-composting prototype to compost food and oil palm wastes into high quality compost. The objective of this article is to highlight the economic and environment impacts of a community-based composting project to the key stakeholders in the community, including residents, oil palm plantation owners and palm oil mill operators by comparing three different scenarios, through a life cycle approach, in terms of the greenhouse gas emission and cost benefit analysis. First scenario is the baseline case, where all the domestic waste is sent to landfill site. In the second scenario, a small-scale centralised composting project was implemented. In the third scenario, the data obtained from Scenario 2 was used to do a projection on the GHG emission and costing analysis for a pilot-scale centralised composting plant. The study showed a reduction potential of 71.64% on GHG emission through the diversion of food waste from landfill, compost utilisation and significant revenue from the compost sale in Scenario 3. This thus provided better insight into the feasibility and desirability in implementing a pilot-scale centralised composting plant for a sub-urban community in Malaysia to achieve a low carbon and self-sustainable society, in terms of environment and economic aspects. Copyright © 2016 Elsevier Ltd. All rights reserved.

The dynamics of magma ascent in the crust: Characterising fluid flow and host-rock deformation using scaled analogue experiments

NASA Astrophysics Data System (ADS)

Kavanagh, Janine; Dennis, David

2015-04-01

We present the results from a series of analogue experiments that use gelatine injected by water to study magma ascent dynamics in the crust. Gelatine is a viscoelastic material that displays predominantly elastic deformation when used at low temperatures (5-10 °C) and mid-to-low concentrations (2-5 wt%). To study dyke propagation we have used a combination of Particle Image Velocimentry (PIV) and Digital Image Correlation (DIC) to characterise the dynamics of fluid flow within the intrusion and contemporaneous deformation of the host gelatine. Experiments are prepared by filling a 40 cm x 40 cm x 30 cm clear-Perspex tank with a gelatine mixture that has been seeded with neutrally buoyant fluorescent particles. Water, also seeded with tracer particles, is then injected into the solid gelatine from below under a constant flux or constant head pressure. This causes a vertical penny-shaped crack (dyke) to propagate through the gelatine and erupt at the surface. During the experiment, a vertical high-power laser sheet positioned along the centre of the tank is triggered to illuminate the seeding particles with short intense pulses, and two Dantec CCD cameras record successive images. Using PIV and DIC, vector fields of fluid flow within the intrusion and strain within the gelatine host is calculated by cross-correlation between successive images at a defined time interval. The experiments indicate that, prior to eruption, dyke propagation is characterised by rapid centralised and upwards fluid flow with accompanying downwards motion at the intrusion margin. Deformation of the gelatine solid is focused at a small head region, with the tail remaining relatively static as the dyke grows. Upon eruption, rapid centralised fluid evacuation occurs with contemporaneous contraction of the dyke and relaxation of the host gelatine. Models that can couple fluid dynamics and host deformation during magma ascent and eruption will make an important step towards improving our understanding of the dynamics of magma transport through the crust, and may help to constrain the tendency for eruption.

Religious Education Programme of the Catholic Church in Hong Kong: Challenges and Responses since 1997

ERIC Educational Resources Information Center

Tse, Thomas Kwan Choi

2015-01-01

The Catholic Church, the largest school-sponsoring body in Hong Kong, is a major provider of religious schools and educational programmes. In 2006, the Catholic Diocese released its first centralised and comprehensive curricular document concerning religious and moral education (RME) in Catholic schools. Taking this programme as a reflection of…

Tenured and Non-Tenured School Principals in Greece: A Historical Approach

ERIC Educational Resources Information Center

Katsigianni, Eleni A.; Ifanti, Amalia A.

2016-01-01

This study deals with the question of tenure/non-tenure of the Greek school principals and its possible impact on their role in the light of the international influences. In developing our theoretical perspective, we draw on the tenure/non-tenure discourse and the centralised bureaucratic and new public management model. After examining the…

Call Us: Development of a Library Telephone Enquiry Service

ERIC Educational Resources Information Center

Burke, Liz; Beranek, Lea

2006-01-01

The authors detail the trial and piloting of a telephone enquiry service (TES) at the Bundoora Campus Library at La Trobe University in order to attempt to resolve the balance between telephone and face-to-face enquiries at the library service desk. They investigated various options throughout 2001 and 2002 and settled on a centralised service…

Obstacles and Opportunities: Addressing the Growing Pains of Summative Student Evaluation of Teaching

ERIC Educational Resources Information Center

Surgenor, P.W.G.

2013-01-01

Summative student evaluation of teaching (SET) is a contentious process, but given the increasing emphasis on quality and accountability, as well as national and international calls for centralised student feedback systems, is likely to become an inevitable aspect of teaching. This research aimed to clarify academics' attitudes to SET in a large…

Customer Relationship Management: A Case Study from a Metropolitan Campus of a Regional University

ERIC Educational Resources Information Center

Pember, Edward R.; Owens, Alison; Yaghi, Shazhi

2014-01-01

This paper investigates the users and uses of a centralised customer relationship management (CRM) system at a regional Australian university to improve the understanding of the staff experience of interacting with this customised technology. How and why the software is used by a cross section of university departments is explored through…

Being Chimaera: A Monstrous Identity for SoTL Academics

ERIC Educational Resources Information Center

Bennett, Rebecca; Hobson, Julia; Jones, Angela; Martin-Lynch, Pamela; Scutt, Cecily; Strehlow, Karin; Veitch, Sarah

2016-01-01

Lurking on the fringes of university culture are academic identities that do not fit into the usual disciplinary communities. Aiming to explore the experience of "being academic" when not linked directly to a discipline, this paper examines the stories of a diverse group of SoTL scholars who work in a centralised multi-campus academic…

Centralising Space: The Physical Education and Physical Activity Experiences of South Asian, Muslim Girls

ERIC Educational Resources Information Center

Stride, Annette

2016-01-01

This paper explores the physical education (PE) and physical activity experiences of a group of South Asian, Muslim girls, a group typically marginalised in PE and physical activity research. The study responds to ongoing calls for research to explore across different spaces in young people's lives. Specifically, I draw on a…

Rise of the Digitized Public Intellectual: Death of the Professor in the Network Neutral Internet Age

ERIC Educational Resources Information Center

Lange, Joshua

2015-01-01

The centralised discourse claiming ownership of "knowledge" and "higher education" seems to be declining as the decentralising discourse extolling open source software and informal social network communication are emerging: yet the two are complementary when higher education is seen as a commodity. Thus, in the internet age of…

University Governance, Leadership and Management in a Decade of Diversification and Uncertainty

ERIC Educational Resources Information Center

Shattock, Michael

2013-01-01

The last decade has seen an acceleration of change in the way British universities have been governed, led and managed. This has substantially been driven by the instability of the external environment, which has encouraged a greater centralisation of decision-making leading to less governance and more management, but it is also a consequence of…

The Kingdom of Tonga

DTIC Science & Technology

1988-11-01

strategy to offset urbanisation is needed in Tonga just as anywhere else, though centralisation in the sense of informational presence and wise...population dynamics are those of internal and external migration, and internal migration is primarily urbanisation . Because of the aforementioned...families and people to move en masse and settle in urban areas. The attendant ills of urbanisation -- overexploiting of resources, juvenile crime

Establishing an Online HIV Peer Helping Programme: A Review of Process Challenges and Lessons Learned

ERIC Educational Resources Information Center

Harris, Gregory E.; Corcoran, Valerie; Myles, Adam; Lundrigan, Philip; White, Robert; Greidanus, Elaine; Savage, Stephanie L.; Pope, Leslie; McDonald, James; Yetman, Gerard

2015-01-01

Background: Online peer support can be a valuable approach to helping people living with HIV, especially in regions with large rural populations and relatively centralised HIV services. Design: This paper focuses on a community-university partnership aimed at developing an online peer support programme in the Canadian province of Newfoundland and…

Integrated Payload Data Handling Systems Using Software Partitioning

NASA Astrophysics Data System (ADS)

Taylor, Alun; Hann, Mark; Wishart, Alex

2015-09-01

An integrated Payload Data Handling System (I-PDHS) is one in which multiple instruments share a central payload processor for their on-board data processing tasks. This offers a number of advantages over the conventional decentralised architecture. Savings in payload mass and power can be realised because the total processing resource is matched to the requirements, as opposed to the decentralised architecture here the processing resource is in effect the sum of all the applications. Overall development cost can be reduced using a common processor. At individual instrument level the potential benefits include a standardised application development environment, and the opportunity to run the instrument data handling application on a fully redundant and more powerful processing platform [1]. This paper describes a joint program by SCISYS UK Limited, Airbus Defence and Space, Imperial College London and RAL Space to implement a realistic demonstration of an I-PDHS using engineering models of flight instruments (a magnetometer and camera) and a laboratory demonstrator of a central payload processor which is functionally representative of a flight design. The objective is to raise the Technology Readiness Level of the centralised data processing technique by address the key areas of task partitioning to prevent fault propagation and the use of a common development process for the instrument applications. The project is supported by a UK Space Agency grant awarded under the National Space Technology Program SpaceCITI scheme. [1].

Forest protected areas governance in Zimbabwe: Shift needed away from a long history of local community exclusion.

PubMed

Mutekwa, V T; Gambiza, J

2017-08-01

In this literature review based paper we explored the concept of exclusion of local communities from accessing resources in forest protected areas (FPAs) in Zimbabwe. We discussed the colonial and post-colonial forms, causes and mechanisms of exclusion and their social, economic and ecological outcomes. We examined the range of powers embodied in and exercised through various mechanisms, processes and social relations and their impact on local communities' access to FPA resources and associated benefits along the historical trajectory of forest governance in Zimbabwe. Results showed that the forms and extent of exclusion changed over time in tandem with the shifting political and economic landscape. During the colonial period, it was total exclusion whereby people were evicted from forest land as well as being denied access to basic resources for their livelihoods. Local communities' access to low value FPA resources improved during the post-colonial period but access to high value resources like commercial timber as well as sharing income benefits derived from FPA commercial activities remained a pipe dream. Regulation, legitimation, force and markets constituted the mixture of the power elements that FPA governing authorities used to exclude local communities. These powers remained intact despite attempts at collaborative governance in the 1990s. However, from the year 2000, local communities expressed their dissatisfaction with the centralised exclusionary governance system by invading the FPAs rendering them ungovernable. There is therefore a need for policy reform within the FPA sector to improve the current dire situation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Disambiguating with Bourdieu: Unravelling Policy from Practice in the Teaching of Children with English as an Additional Language

ERIC Educational Resources Information Center

Flynn, Naomi

2015-01-01

This article explores the use of Bourdieusian analysis for examining how policy and practice interact in the teaching of English and therefore in the development of children's language and literacy, in particular how. Bourdieusian analysis uncovers the ways in which teachers' practice has been influenced unconsciously by centralised shaping of the…

Getting the Most Out of Public Sector Decentralisation in Spain. OECD Economics Department Working Papers No. 436

ERIC Educational Resources Information Center

Joumard, Isabelle; Giorno, Claude

2005-01-01

In about two decades, Spain was transformed from one of the most centralised countries to one of the most decentralised. Spending functions were devolved rapidly. Following the rapid decentralisation to the regions since the early 1980s, the sub-national authorities now have more staff to manage than the central government and have…

The Nature of All "Inappropriate Referrals" Made to a Countywide Physical Activity Referral Scheme: Implications for Practice

ERIC Educational Resources Information Center

Johnston, Lynne Halley; Warwick, Jane; De Ste Croix, Mark; Crone, Diane; Sldford, Adrienne

2005-01-01

Objective: The aim of this study was to evaluate the impact of a centralised referral mechanism (CRM) upon the number and type of "inappropriate referrals" made to a countywide physical activity referral scheme. Design: Case study. Method: Phase 1: Hierarchical Content Analysis of 458 "inappropriate referrals" made to a countywide scheme over a…

Flipping the Coin: Towards a Double-Faced Approach to Teaching Black Literature in Secondary English Classrooms

ERIC Educational Resources Information Center

Price, Vincent

2017-01-01

Critiquing two approaches that English teachers use to teach Black, or African-American, literature in the secondary classroom--one that centralises races and the other that ignores it--this article proposes a hybrid approach that combines both. This double-faced approach recognises the culturally specific themes that give the text and the Black…

Teachers Are Doing It for Themselves: Using Social Media for Professional Development and Advocacy

ERIC Educational Resources Information Center

Hardy, Emma Ann

2014-01-01

Social media, such as Twitter and blogs, has opened up new possibilities for teachers to communicate. In the face of increasingly centralised policy agendas, social media has created spaces for teachers to talk to each other, share with each other and learn from each other. This article explores how teachers are creating their own spaces by using…

An Examination of Language Teachers' Enactment of Curriculum Materials in the Context of a Centralised Curriculum

ERIC Educational Resources Information Center

Li, Zhan; Harfitt, Gary James

2017-01-01

This paper examines a ubiquitous yet under-studied area of language pedagogy, namely materials usage. It explores teachers' enactment of curriculum materials by focusing on English language education (ELE) teachers' use of prescribed textbooks to plan and deliver lessons at the tertiary level in Mainland China. A qualitative multi-case study…

From Divergent Evolution to Witting Cross-Fertilisation: The Need for More Awareness of Potential Inter-Discursive Communication Regarding Students' Extended Historical Writing

ERIC Educational Resources Information Center

Carroll, James Edward

2017-01-01

History education stakeholders in England have consistently judged that some students find formal historical writing prohibitively difficult due to the demands of constructing an extended argument. While policy makers have agreed students need support in their historical writing, recurring themes in centralised resourcing have been wastage,…

Equality and Inequality of Opportunity in Education: Chinese Emergent Bilingual Children in the English Mainstream Classroom

ERIC Educational Resources Information Center

Chen, Yangguang

2007-01-01

In Britain, since the 1980s, the term "equality of opportunity" has been a major theme at the heart of the government's agenda. Centralisation via the National Curriculum documents has strengthened the idea of "education for all". In terms of many linguistic minority children, mainstreaming and the English as an Additional Language (EAL) provision…

Activism, Identity and Service: The Influence of the Asian American Movement on the Educational Experiences of College Students

ERIC Educational Resources Information Center

Nguyen, Thai-Huy; Gasman, Marybeth

2015-01-01

This article emphasises two major themes that address the influence of the Asian American Movement: (1) encouraging students to broaden the discourse on race and ethnic relations by redefining categories and challenging prevalent assumptions; (2) an increased tolerance and frequency in course offerings that examine and centralise the histories,…

"The Rotten Banana" Fires Back: The Story of a Danish Discourse of "Inclusive" Rurality in the Making

ERIC Educational Resources Information Center

Winther, Malene Brandt; Svendsen, Gunnar Lind Haase

2012-01-01

The popularity of a particular term--the Rotten Banana--has paralleled the one-sided centralisation of public services since the Danish Municipal Reform of 2007. The Rotten Banana denotes peripheral Denmark, which takes a geographically curved form that resembles a banana, and it symbolises the belief that rural areas are backward and (too)…

Developing and sustaining adolescent-friendly health services: A multiple case study from Ecuador and Peru.

PubMed

Goicolea, Isabel; Coe, Anna-Britt; San Sebastián, Miguel; Hurtig, Anna-Karin

2017-08-01

Adolescent-Friendly Health Services (AFHSs) are those that are accessible, acceptable, equitable, appropriate and effective for different youth sub-populations. This study investigated the process through which four clinics in two countries - Peru and Ecuador - introduced, developed and sustained AFHSs. A multiple case study design was chosen, and data from each clinic were collected through document review, observations and informant interviews. National level data were also collected. Data were analysed following thematic analysis. The findings showed that the process of introducing, developing and sustaining AFHSs was long term, and required a creative team effort and collaboration between donors, public institutions and health providers. The motivation and external support was crucial to initiating and sustaining the implementation of AFHSs. Health facilities' transformation into AFHSs was linked to the broader organisation of country health systems, and the evolution of national adolescent health policies. In Peru, the centralised approach to AFHSs introduction facilitated the dissemination of a comprehensive national model to health facilities, but dependency on national directives made it more difficult to systemise them when ideological and organisational changes occurred. In Ecuador, a less centralised approach to introducing AFHSs made for easier integration of the AFHSs model.

An agent-based peer-to-peer architecture for semantic discovery of manufacturing services across virtual enterprises

NASA Astrophysics Data System (ADS)

Zhang, Wenyu; Zhang, Shuai; Cai, Ming; Jian, Wu

2015-04-01

With the development of virtual enterprise (VE) paradigm, the usage of serviceoriented architecture (SOA) is increasingly being considered for facilitating the integration and utilisation of distributed manufacturing resources. However, due to the heterogeneous nature among VEs, the dynamic nature of a VE and the autonomous nature of each VE member, the lack of both sophisticated coordination mechanism in the popular centralised infrastructure and semantic expressivity in the existing SOA standards make the current centralised, syntactic service discovery method undesirable. This motivates the proposed agent-based peer-to-peer (P2P) architecture for semantic discovery of manufacturing services across VEs. Multi-agent technology provides autonomous and flexible problemsolving capabilities in dynamic and adaptive VE environments. Peer-to-peer overlay provides highly scalable coupling across decentralised VEs, each of which exhibiting as a peer composed of multiple agents dealing with manufacturing services. The proposed architecture utilises a novel, efficient, two-stage search strategy - semantic peer discovery and semantic service discovery - to handle the complex searches of manufacturing services across VEs through fast peer filtering. The operation and experimental evaluation of the prototype system are presented to validate the implementation of the proposed approach.

A new decentralised controller design method for a class of strongly interconnected systems

NASA Astrophysics Data System (ADS)

Duan, Zhisheng; Jiang, Zhong-Ping; Huang, Lin

2017-02-01

In this paper, two interconnected structures are first discussed, under which some closed-loop subsystems must be unstable to make the whole interconnected system stable, which can be viewed as a kind of strongly interconnected systems. Then, comparisons with small gain theorem are discussed and large gain interconnected characteristics are shown. A new approach for the design of decentralised controllers is presented by determining the Lyapunov function structure previously, which allows the existence of unstable subsystems. By fully utilising the orthogonal space information of input matrix, some new understandings are presented for the construction of Lyapunov matrix. This new method can deal with decentralised state feedback, static output feedback and dynamic output feedback controllers in a unified framework. Furthermore, in order to reduce the design conservativeness and deal with robustness, a new robust decentralised controller design method is given by combining with the parameter-dependent Lyapunov function method. Some basic rules are provided for the choice of initial variables in Lyapunov matrix or new introduced slack matrices. As byproducts, some linear matrix inequality based sufficient conditions are established for centralised static output feedback stabilisation. Effects of unstable subsystems in nonlinear Lur'e systems are further discussed. The corresponding decentralised controller design method is presented for absolute stability. The examples illustrate that the new method is significantly effective.

Centralisation of Assessment: Meeting the Challenges of Multi-Year Team Projects in Information Systems Education

ERIC Educational Resources Information Center

Cooper, Grahame; Heinze, Aleksej

2007-01-01

This paper focuses on the difficulties of assessing multi-year team projects, in which a team of students drawn from all three years of a full-time degree course works on a problem with and for a real-life organization. Although potential solutions to the problem of assessing team projects may be context-dependent, we believe that discussing these…

Students' Perceptions of the Value of the Elements of an Online Learning Environment: Looking Back in Moving Forward

ERIC Educational Resources Information Center

Palmer, Stuart; Holt, Dale

2010-01-01

In 2003, Deakin University implemented a centralised learning management system (LMS) under the banner of Deakin Studies Online (DSO), as well as implementing policies requiring all its units of study to have at least a basic online presence from 2004. Given the scope of the university's commitment to online education, it was considered essential…

Can Schools Be Autonomous in a Centralised Educational System?: On Formal and Actual School Autonomy in the Italian Context

ERIC Educational Resources Information Center

Agasisti, Tommaso; Catalano, Giuseppe; Sibiano, Piergiacomo

2013-01-01

Purpose: The purpose of this paper is to examine the difference between formal and real school autonomy in the Italian educational system. The Italian case is characterised by low levels of school autonomy. It is interesting to consider whether heterogeneity of patterns is possible in this context. A description of this heterogeneity is provided…

"Decentralised" Neoliberalism and/or "Masked" Re-Centralisation? The Policy to Practice Trajectory of Maltese School Reform through the Lens of Neoliberalism and Foucault

ERIC Educational Resources Information Center

Mifsud, Denise

2016-01-01

The politics of the later part of the twentieth century have been marked by the emergence of neoliberalism, which has consequently impregnated the global policy climate with neoliberal technologies of government. It is within this political scenario of hegemonic neoliberal discourse that I explore one aspect of school reform in Malta--contrived…

Infrastructure Supporting Teachers in the Country: Questions of Equity Arising from Downsizing and Restructuring

ERIC Educational Resources Information Center

Brennan, Marie

2006-01-01

Australia has long been of interest for its attention to educational equity by the relative quality of its state based provision of schooling in a country with a similar landmass to the 48 mainland states of the USA but a population of only 18 million. The six states and two territories had organised centralised systems of schooling which managed…

Education in the Realm of the Senses: Understanding Paulo Freire's Aesthetic Unconscious through Jacques Ranciere

ERIC Educational Resources Information Center

Lewis, Tyson Edward

2009-01-01

In this article I re-examine the role that aesthetics play in Paulo Freire's pedagogy of the oppressed. As opposed to the vast majority of scholarship in this area, I suggest that aesthetics play a more centralised role in pedagogy above and beyond arts-based curricula. To help clarify Freire's position, I will argue that underlying the linguistic…

Everyday Teaching and Outdoor Learning: Developing an Integrated Approach to Support School-Based Provision

ERIC Educational Resources Information Center

MacQuarrie, Sarah

2018-01-01

In the UK, teachers are increasingly being encouraged to support and undertake outdoor learning. Despite such support there is a paucity of research that has considered how outdoor learning can be implemented and offered on a regular basis by teachers. The lack of empirical research that has centralised the role of the teacher is at odds with the…

Hospital volume and mortality for 25 types of inpatient treatment in German hospitals: observational study using complete national data from 2009 to 2014.

PubMed

Nimptsch, Ulrike; Mansky, Thomas

2017-09-06

To explore the existence and strength of a relationship between hospital volume and mortality, to estimate minimum volume thresholds and to assess the potential benefit of centralisation of services. Observational population-based study using complete German hospital discharge data (Diagnosis-Related Group Statistics (DRG Statistics)). All acute care hospitals in Germany. All adult patients hospitalised for 1 out of 25 common or medically important types of inpatient treatment from 2009 to 2014. Risk-adjusted inhospital mortality. Lower inhospital mortality in association with higher hospital volume was observed in 20 out of the 25 studied types of treatment when volume was categorised in quintiles and persisted in 17 types of treatment when volume was analysed as a continuous variable. Such a relationship was found in some of the studied emergency conditions and low-risk procedures. It was more consistently present regarding complex surgical procedures. For example, about 22 000 patients receiving open repair of abdominal aortic aneurysm were analysed. In very high-volume hospitals, risk-adjusted mortality was 4.7% (95% CI 4.1 to 5.4) compared with 7.8% (7.1 to 8.7) in very low volume hospitals. Theminimum volume above which risk of death would fall below the average mortality was estimated as 18 cases per year. If all hospitals providing this service would perform at least 18 cases per year, one death among 104 (76 to 166) patients could potentially be prevented. Based on complete national hospital discharge data, the results confirmed volume-outcome relationships for many complex surgical procedures, as well as for some emergency conditions and low-risk procedures. Following these findings, the study identified areas where centralisation would provide a benefit for patients undergoing the specific type of treatment in German hospitals and quantified the possible impact of centralisation efforts. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Explaining outcomes in major system change: a qualitative study of implementing centralised acute stroke services in two large metropolitan regions in England.

PubMed

Fulop, Naomi J; Ramsay, Angus I G; Perry, Catherine; Boaden, Ruth J; McKevitt, Christopher; Rudd, Anthony G; Turner, Simon J; Tyrrell, Pippa J; Wolfe, Charles D A; Morris, Stephen

2016-06-03

Implementing major system change in healthcare is not well understood. This gap may be addressed by analysing change in terms of interrelated components identified in the implementation literature, including decision to change, intervention selection, implementation approaches, implementation outcomes, and intervention outcomes. We conducted a qualitative study of two cases of major system change: the centralisation of acute stroke services in Manchester and London, which were associated with significantly different implementation outcomes (fidelity to referral pathway) and intervention outcomes (provision of evidence-based care, patient mortality). We interviewed stakeholders at national, pan-regional, and service-levels (n = 125) and analysed 653 documents. Using a framework developed for this study from the implementation science literature, we examined factors influencing implementation approaches; how these approaches interacted with the models selected to influence implementation outcomes; and their relationship to intervention outcomes. London and Manchester's differing implementation outcomes were influenced by the different service models selected and implementation approaches used. Fidelity to the referral pathway was higher in London, where a 'simpler', more inclusive model was used, implemented with a 'big bang' launch and 'hands-on' facilitation by stroke clinical networks. In contrast, a phased approach of a more complex pathway was used in Manchester, and the network acted more as a platform to share learning. Service development occurred more uniformly in London, where service specifications were linked to financial incentives, and achieving standards was a condition of service launch, in contrast to Manchester. 'Hands-on' network facilitation, in the form of dedicated project management support, contributed to achievement of these standards in London; such facilitation processes were less evident in Manchester. Using acute stroke service centralisation in London and Manchester as an example, interaction between model selected and implementation approaches significantly influenced fidelity to the model. The contrasting implementation outcomes may have affected differences in provision of evidence-based care and patient mortality. The framework used in this analysis may support planning and evaluating major system changes, but would benefit from application in different healthcare contexts.

Attorney General forces Infectious Diseases Society of America to redo Lyme guidelines due to flawed development process.

PubMed

Johnson, L; Stricker, R B

2009-05-01

Lyme disease is one of the most controversial illnesses in the history of medicine. In 2006 the Connecticut Attorney General launched an antitrust investigation into the Lyme guidelines development process of the Infectious Diseases Society of America (IDSA). In a recent settlement with IDSA, the Attorney General noted important commercial conflicts of interest and suppression of scientific evidence that had tainted the guidelines process. This paper explores two broad ethical themes that influenced the IDSA investigation. The first is the growing problem of conflicts of interest among guidelines developers, and the second is the increasing centralisation of medical decisions by insurance companies, which use treatment guidelines as a means of controlling the practices of individual doctors and denying treatment for patients. The implications of the first-ever antitrust investigation of medical guidelines and the proposed model to remediate the tainted IDSA guidelines process are also discussed.

Sampled-data controller implementation

NASA Astrophysics Data System (ADS)

Wang, Yu; Leduc, Ryan J.

2012-09-01

The setting of this article is the implementation of timed discrete-event systems (TDES) as sampled-data (SD) controllers. An SD controller is driven by a periodic clock and sees the system as a series of inputs and outputs. On each clock edge (tick event), it samples its inputs, changes states and updates its outputs. In this article, we establish a formal representation of an SD controller as a Moore synchronous finite state machine (FSM). We describe how to translate a TDES supervisor to an FSM, as well as necessary properties to be able to do so. We discuss how to construct a single centralised controller as well as a set of modular controllers, and show that they will produce equivalent output. We briefly discuss how the recently introduced SD controllability definition relates to our translation method. SD controllability is an extension of TDES controllability which captures several new properties that are useful in dealing with concurrency issues, as well as make it easier to translate a TDES supervisor into an SD controller. We next discuss the application of SD controllability to a small flexible manufacturing system (FMS) from the literature. The example demonstrates the successful application of the new SD properties. We describe the design of the system in detail to illustrate the new conditions and to provide designers with guidance on how to apply the properties. We also present some FSM translation issues encountered, as well as the FSM version of the system's supervisors.

Australia's continental-scale acoustic tracking database and its automated quality control process

NASA Astrophysics Data System (ADS)

Hoenner, Xavier; Huveneers, Charlie; Steckenreuter, Andre; Simpfendorfer, Colin; Tattersall, Katherine; Jaine, Fabrice; Atkins, Natalia; Babcock, Russ; Brodie, Stephanie; Burgess, Jonathan; Campbell, Hamish; Heupel, Michelle; Pasquer, Benedicte; Proctor, Roger; Taylor, Matthew D.; Udyawer, Vinay; Harcourt, Robert

2018-01-01

Our ability to predict species responses to environmental changes relies on accurate records of animal movement patterns. Continental-scale acoustic telemetry networks are increasingly being established worldwide, producing large volumes of information-rich geospatial data. During the last decade, the Integrated Marine Observing System's Animal Tracking Facility (IMOS ATF) established a permanent array of acoustic receivers around Australia. Simultaneously, IMOS developed a centralised national database to foster collaborative research across the user community and quantify individual behaviour across a broad range of taxa. Here we present the database and quality control procedures developed to collate 49.6 million valid detections from 1891 receiving stations. This dataset consists of detections for 3,777 tags deployed on 117 marine species, with distances travelled ranging from a few to thousands of kilometres. Connectivity between regions was only made possible by the joint contribution of IMOS infrastructure and researcher-funded receivers. This dataset constitutes a valuable resource facilitating meta-analysis of animal movement, distributions, and habitat use, and is important for relating species distribution shifts with environmental covariates.

Advanced data management for optimising the operation of a full-scale WWTP.

PubMed

Beltrán, Sergio; Maiza, Mikel; de la Sota, Alejandro; Villanueva, José María; Ayesa, Eduardo

2012-01-01

The lack of appropriate data management tools is presently a limiting factor for a broader implementation and a more efficient use of sensors and analysers, monitoring systems and process controllers in wastewater treatment plants (WWTPs). This paper presents a technical solution for advanced data management of a full-scale WWTP. The solution is based on an efficient and intelligent use of the plant data by a standard centralisation of the heterogeneous data acquired from different sources, effective data processing to extract adequate information, and a straightforward connection to other emerging tools focused on the operational optimisation of the plant such as advanced monitoring and control or dynamic simulators. A pilot study of the advanced data manager tool was designed and implemented in the Galindo-Bilbao WWTP. The results of the pilot study showed its potential for agile and intelligent plant data management by generating new enriched information combining data from different plant sources, facilitating the connection of operational support systems, and developing automatic plots and trends of simulated results and actual data for plant performance and diagnosis.

Availability of brands of six essential medicines in 124 pharmacies in Maharashtra.

PubMed

Millard, Colin; Kadam, Abhay B; Mahajan, Rushikesh; Pollock, Allyson M; Brhlikova, Petra

2018-06-01

The aim of this study is to assess the availability and rational use of six essential medicines in private retail outlets in Maharashtra state. The study focuses on the range of brands for each medicine, and the availability of these brands in the pharmacies. The medicines were chosen because they are included in the World Health Organization's (WHO) essential medicines list (EML), the Indian national and Maharashtra state medicines list, and are all included in existing Indian public health initiatives and national disease control programmes. Data was gathered on the availability of the medicines and the range and frequency of brands in 124 private retail pharmacies between January and May 2012. As there is currently no centralised database in India of available pharmaceutical brands, we collected data on the range of products of the 6 essential medicines available in the Indian market by consulting three open access Indian pharmaceutical databases, CIMS India, Medindia, and Medguide, and the commercial database, Pharmatrac; we compared this data with the results of the survey. The six essential medicines used in this study are: artemisinin (malaria), lamivudine (HIV/AIDS), rifampicin (tuberculosis control), oxytocin (reproductive health), fluoxetine (mental health) and metformin (diabetes). The study found that for each of the selected medicines there were multiple approved products listed in Indian databases, 2186 in total. The Pharmatrac database lists only 1359 brands of the selected medicines; 978 (72%) of these had zero sales in 2011-2012. Our survey found very low availability of the brands: 17% Pharmatrac marketed brands (163/978) and 12% of all Pharmatrac brands (163/1359) were available. Metformin was the only medicine with high availability in the study pharmacies at 91%, Rifampacin was the second highest at 64.5%; the other four medicines were available in less than half the pharmacies. A small number of brands were dominating the market. the survey shows that market competition has generated a large number of brands of the six study medicines but this has not translated into sufficient availability of these medicines in the study pharmacies. The data calls for a review of available brands, taking into consideration levels of sale and grounds for approval, and the setting up of a centralised database of registered pharmaceutical products.

Availability of brands of six essential medicines in 124 pharmacies in Maharashtra

PubMed Central

Millard, Colin; Kadam, Abhay B; Mahajan, Rushikesh; Pollock, Allyson M; Brhlikova, Petra

2018-01-01

Background The aim of this study is to assess the availability and rational use of six essential medicines in private retail outlets in Maharashtra state. The study focuses on the range of brands for each medicine, and the availability of these brands in the pharmacies. The medicines were chosen because they are included in the World Health Organization’s (WHO) essential medicines list (EML), the Indian national and Maharashtra state medicines list, and are all included in existing Indian public health initiatives and national disease control programmes. Methods Data was gathered on the availability of the medicines and the range and frequency of brands in 124 private retail pharmacies between January and May 2012. As there is currently no centralised database in India of available pharmaceutical brands, we collected data on the range of products of the 6 essential medicines available in the Indian market by consulting three open access Indian pharmaceutical databases, CIMS India, Medindia, and Medguide, and the commercial database, Pharmatrac; we compared this data with the results of the survey. The six essential medicines used in this study are: artemisinin (malaria), lamivudine (HIV/AIDS), rifampicin (tuberculosis control), oxytocin (reproductive health), fluoxetine (mental health) and metformin (diabetes). Results The study found that for each of the selected medicines there were multiple approved products listed in Indian databases, 2186 in total. The Pharmatrac database lists only 1359 brands of the selected medicines; 978 (72%) of these had zero sales in 2011-2012. Our survey found very low availability of the brands: 17% Pharmatrac marketed brands (163/978) and 12% of all Pharmatrac brands (163/1359) were available. Metformin was the only medicine with high availability in the study pharmacies at 91%, Rifampacin was the second highest at 64.5%; the other four medicines were available in less than half the pharmacies. A small number of brands were dominating the market. Conclusion the survey shows that market competition has generated a large number of brands of the six study medicines but this has not translated into sufficient availability of these medicines in the study pharmacies. The data calls for a review of available brands, taking into consideration levels of sale and grounds for approval, and the setting up of a centralised database of registered pharmaceutical products. PMID:29423188

International Federation of Library Associations Annual Conference Papers. Collections and Services Division: Interlending, Rare and Precious Books, and Exchange and Acquisition Sections (47th, Leipzig, East Germany, August 17-22, 1981).

ERIC Educational Resources Information Center

Line, Maurice B.; And Others

This set of papers presented to the Collections and Services Division of the International Federation of Library Associations at its 47th annual conference (1981) includes: "Planning Interlending Systems in Developing Countries," by Maurice B. Line; "Problems of Centralisation of Inter-Library Lending in a De-Centralized Library…

The Permanent Secretary as Policy-Maker, Shaper, Taker, Sharer, and Resister in Education--Reflections on Sir James Hamilton as a Centralising Outsider

ERIC Educational Resources Information Center

Ribbins, Peter; Sherratt, Brian

2013-01-01

Given that elevation to permanent secretary is widely recognised as the apotheosis of a career in the Whitehall bureaucracy, it is remarkable that so few have been the subject of sustained biographical research and that this key role remains largely un-theorised. As such, this paper reports on aspects of a longitudinal study which set out to…

Governance Dynamics and the Application of the Multilevel Governance Approach in Vocational Education and Training (VET) in the European Neighbourhood Countries: The Case of the ENPI South Region

ERIC Educational Resources Information Center

Galvin Arribas, J. Manuel

2016-01-01

This article analyses moves towards good multilevel governance approaches in Vocational Education and Training (VET) as an effective way to improve VET policy making in transition and developing countries, focusing on the Southern Neighbourhood of the EU (ENPI South). The centralised approaches in public administration and to VET governance still…

Neglected chronic disease: The WHO framework on non-communicable diseases and implications for the global poor.

PubMed

Nulu, Shanti

2017-04-01

The current global framework on noncommunicable disease (NCD), as exemplified by the WHO Action Plan of 2012, neglects the needs of the global poor. The current framework is rooted in an outdated pseudo-evolutionary theory of epidemiologic transition, which weds NCDs to modernity, and relies on global aggregate data. It is oriented around a simplistic causal model of behaviour, risk and disease, which implicitly locates 'risk' within individuals, conveniently drawing attention away from important global drivers of the NCD epidemic. In fact, the epidemiologic realities of the bottom billion reveal a burden of neglected chronic diseases that are associated with 'alternative' environmental and infectious risks that are largely structurally determined. In addition, the vertical orientation of the framework fails to centralise health systems and delivery issues that are essential to chronic disease prevention and treatment. A new framework oriented around a global health equity perspective would be able to correct some of the failures of the current model by bringing the needs of the global poor to the forefront, and centralising health systems and delivery. In addition, core social science concepts such as Bordieu's habitus may be useful to re-conceptualising strategies that may address both behavioural and structural determinants of health.

The rise of the regulatory state in health care: a comparative analysis of The Netherlands, England and Italy.

PubMed

Helderman, Jan-Kees; Bevan, Gwyn; France, George

2012-01-01

In a relatively short time, regulation has become a significant and distinct feature of how modern states wish to govern and steer their economy and society. Whereas the former 'dirigiste' state used to be closely related to public ownership (e.g. hospitals), planning (volume and capacity planning) and centralised administration (e.g. fixed prices and budgets), the new regulatory state relies mainly on the instrument of regulation to achieve its objectives. In this paper, we wish to relate the rise of the 'regulatory state' to the path-dependent trajectories and institutional legacies of discrete European health-care systems. For this purpose, we compared the Dutch corporatist social health insurance system, the strongly centralised National Health Service (NHS) of England and federal regionalised NHS system of Italy. Comparing these three different health-care systems suggests that it is indeed possible to identify a general trend towards the rise of the regulatory state in health care in the last two decades. However, although the three countries examined in this paper face similar problems of multilevel governance of networks of third-party payers and providers, each system also gives rise to its own distinct regulatory challenges. © Cambridge University Press 2012

Offshore Floating Wind Turbine-driven Deep Sea Water Pumping for Combined Electrical Power and District Cooling

NASA Astrophysics Data System (ADS)

Sant, T.; Buhagiar, D.; Farrugia, R. N.

2014-06-01

A new concept utilising floating wind turbines to exploit the low temperatures of deep sea water for space cooling in buildings is presented. The approach is based on offshore hydraulic wind turbines pumping pressurised deep sea water to a centralised plant consisting of a hydro-electric power system coupled to a large-scale sea water-cooled air conditioning (AC) unit of an urban district cooling network. In order to investigate the potential advantages of this new concept over conventional technologies, a simplified model for performance simulation of a vapour compression AC unit was applied independently to three different systems, with the AC unit operating with (1) a constant flow of sea surface water, (2) a constant flow of sea water consisting of a mixture of surface sea water and deep sea water delivered by a single offshore hydraulic wind turbine and (3) an intermittent flow of deep sea water pumped by a single offshore hydraulic wind turbine. The analysis was based on one year of wind and ambient temperature data for the Central Mediterranean that is known for its deep waters, warm climate and relatively low wind speeds. The study confirmed that while the present concept is less efficient than conventional turbines utilising grid-connected electrical generators, a significant portion of the losses associated with the hydraulic transmission through the pipeline are offset by the extraction of cool deep sea water which reduces the electricity consumption of urban air-conditioning units.

A life cycle approach to the management of household food waste - A Swedish full-scale case study.

PubMed

Bernstad, A; la Cour Jansen, J

2011-08-01

Environmental impacts from incineration, decentralised composting and centralised anaerobic digestion of solid organic household waste are compared using the EASEWASTE LCA-tool. The comparison is based on a full scale case study in southern Sweden and used input-data related to aspects such as source-separation behaviour, transport distances, etc. are site-specific. Results show that biological treatment methods - both anaerobic and aerobic, result in net avoidance of GHG-emissions, but give a larger contribution both to nutrient enrichment and acidification when compared to incineration. Results are to a high degree dependent on energy substitution and emissions during biological processes. It was seen that if it is assumed that produced biogas substitute electricity based on Danish coal power, this is preferable before use of biogas as car fuel. Use of biogas for Danish electricity substitution was also determined to be more beneficial compared to incineration of organic household waste. This is a result mainly of the use of plastic bags in the incineration alternative (compared to paper bags in the anaerobic) and the use of biofertiliser (digestate) from anaerobic treatment as substitution of chemical fertilisers used in an incineration alternative. Net impact related to GWP from the management chain varies from a contribution of 2.6kg CO(2)-eq/household and year if incineration is utilised, to an avoidance of 5.6kg CO(2)-eq/household and year if choosing anaerobic digestion and using produced biogas as car fuel. Impacts are often dependent on processes allocated far from the control of local decision-makers, indicating the importance of a holistic approach and extended collaboration between agents in the waste management chain. Copyright © 2011 Elsevier Ltd. All rights reserved.

Mission Command: Elasticity, Equilibrium, Culture, and Intent

DTIC Science & Technology

2006-11-01

évidence « l’élasticité » de l’organisation. Comparativement à l’organisation décentralisée, une force centralisée possède une réserve beaucoup plus...avoir une faible intention implicite potentiel comparativement à une autre. La mesure dans laquelle la culture de commandement de l’organisation...is that the organisation is optimised, by design , to operate at this point on the continuum. Centralised Decentralised Shared Intent Implicit

Responding to the Potential of Ebola Virus Disease (EVD) Importation into Malaysia

PubMed Central

WAN MOHAMED NOOR, Wan Noraini; SANDHU, Sukhvinder Singh; AHMAD MAHIR, Husna Maizura; KURUP, Devan; RUSLI, Norhayati; SAAT, Zainah; CHONG, Chee Kheong; SULAIMAN, Lokman Hakim; ABDULLAH, Noor Hisham

2014-01-01

The current Ebola outbreak, which is the first to affect West African countries, has been declared to have met the conditions for a Public Health Emergency of International Concern (PHEIC) by the World Health Organization (WHO). Thus, the Ministry of Health (MOH) of Malaysia has taken steps to strengthen and enhanced the five core components of preparedness and response to mitigate the outbreak. The National Crisis Preparedness and Response Centre (CPRC) commands, controls and coordinates the preparedness and response plans for disasters, outbreaks, crises and emergencies (DOCE) related to health in a centralised way. Through standardised case definition and mandatory notification of Ebola by public and private practitioners, surveillance of Ebola is made possible. Government hospitals and laboratories have been identified to manage and diagnose Ebola virus infections, and medical staff members have been trained to handle an Ebola outbreak, with emphasis on strict infection prevention and control practices. Monitoring of the points of entry, focusing on travellers and students visiting or coming from West African countries is made possible by interagency collaborations. To alleviate the public’s anxiety, effective risk communications are being delivered through various channels. With experience in past outbreak control, the MOH’s preparedness and response plans are in place to abate an Ebola outbreak. PMID:25897276

Specifications of Standards in Systems and Synthetic Biology: Status and Developments in 2017.

PubMed

Schreiber, Falk; Bader, Gary D; Gleeson, Padraig; Golebiewski, Martin; Hucka, Michael; Keating, Sarah M; Novère, Nicolas Le; Myers, Chris; Nickerson, David; Sommer, Björn; Waltemath, Dagmar

2018-03-29

Standards are essential to the advancement of Systems and Synthetic Biology. COMBINE provides a formal body and a centralised platform to help develop and disseminate relevant standards and related resources. The regular special issue of the Journal of Integrative Bioinformatics aims to support the exchange, distribution and archiving of these standards by providing unified, easily citable access. This paper provides an overview of existing COMBINE standards and presents developments of the last year.

Evaluating De-centralised and Distributional Options for the Distributed Electronic Warfare Situation Awareness and Response Test Bed

DTIC Science & Technology

2013-12-01

effectors (deployed on ground based or aerial platforms) to detect , identify, locate, track or suppress stationary or slow moving surface based RF...ground based or aerial platforms) to detect , identify, locate, track or suppress stationary or slow moving surface based RF emitting targets. In the...Electronic Support EO Electro-Optic FPGAs Field Programmable Gate Arrays IR Infra-red LADAR Laser Detection and Ranging OSX Mac OS X; the apple

SSMNG Software Service Manager: A Scalable Building Blocks Architecture for PUS Services & FDIR Management

NASA Astrophysics Data System (ADS)

Lisio, Giovanni; Candia, Sante; Campolo, Giovanni; Pascucci, Dario

2011-08-01

Thales Alenia Space Italy has carried out the definition of a configurable (on mission basis) PUS ECSS-E_70- 41A see [3] Centralised Services Layer, characterised by:- a mission-independent set of 'classes' implementing the services logic.- a mission-dependent set of configuration data and selection flags.The software components belonging to this layer implement the PUS standard services ECSS-E_70-41A and a set of mission-specific services. The design of this layer has been performed by separating the services mechanisms (mission-independent execution logic) from the services configuration information (mission-dependent data). Once instantiated for a specific mission, the PUS Centralised Services Layer offers a large set of capabilities available to the CSCI's Applications Layer. This paper describes the building blocks PUS architectural solution developed by Thales Alenia Space Italy, emphasizing the mechanisms which allow easy configuration of the Scalable PUS library to fulfill the requirements of different missions. This paper also focus the Thales Alenia Space solution to automatically generate the mission-specific "PUS Services" flight software based on mission specific requirements. Building the PUS services mechanisms, which are configurable on mission basis is part of the PRIMA (Multipurpose Spacecraft Bus ) 'missionisation' process improvement. PRIMA Platform Avionics Software (ASW) is continuously evolving to improve modularity and standardization of interfaces and of SW components (see references in [1]).

Automated collection of medical images for research from heterogeneous systems: trials and tribulations

NASA Astrophysics Data System (ADS)

Patel, M. N.; Looney, P.; Young, K.; Halling-Brown, M. D.

2014-03-01

Radiological imaging is fundamental within the healthcare industry and has become routinely adopted for diagnosis, disease monitoring and treatment planning. Over the past two decades both diagnostic and therapeutic imaging have undergone a rapid growth, the ability to be able to harness this large influx of medical images can provide an essential resource for research and training. Traditionally, the systematic collection of medical images for research from heterogeneous sites has not been commonplace within the NHS and is fraught with challenges including; data acquisition, storage, secure transfer and correct anonymisation. Here, we describe a semi-automated system, which comprehensively oversees the collection of both unprocessed and processed medical images from acquisition to a centralised database. The provision of unprocessed images within our repository enables a multitude of potential research possibilities that utilise the images. Furthermore, we have developed systems and software to integrate these data with their associated clinical data and annotations providing a centralised dataset for research. Currently we regularly collect digital mammography images from two sites and partially collect from a further three, with efforts to expand into other modalities and sites currently ongoing. At present we have collected 34,014 2D images from 2623 individuals. In this paper we describe our medical image collection system for research and discuss the wide spectrum of challenges faced during the design and implementation of such systems.

Cost evaluation to optimise radiation therapy implementation in different income settings: A time-driven activity-based analysis.

PubMed

Van Dyk, Jacob; Zubizarreta, Eduardo; Lievens, Yolande

2017-11-01

With increasing recognition of growing cancer incidence globally, efficient means of expanding radiotherapy capacity is imperative, and understanding the factors impacting human and financial needs is valuable. A time-driven activity-based costing analysis was performed, using a base case of 2-machine departments, with defined cost inputs and operating parameters. Four income groups were analysed, ranging from low to high income. Scenario analyses included department size, operating hours, fractionation, treatment complexity, efficiency, and centralised versus decentralised care. The base case cost/course is US$5,368 in HICs, US$2,028 in LICs; the annual operating cost is US$4,595,000 and US$1,736,000, respectively. Economies of scale show cost/course decreasing with increasing department size, mainly related to the equipment cost and most prominent up to 3 linacs. The cost in HICs is two or three times as high as in U-MICs or LICs, respectively. Decreasing operating hours below 8h/day has a dramatic impact on the cost/course. IMRT increases the cost/course by 22%. Centralising preparatory activities has a moderate impact on the costs. The results indicate trends that are useful for optimising local and regional circumstances. This methodology can provide input into a uniform and accepted approach to evaluating the cost of radiotherapy. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Improving access and equity in reducing cardiovascular risk: the Queensland Health model.

PubMed

Ski, Chantal F; Vale, Margarite J; Bennett, Gary R; Chalmers, Victoria L; McFarlane, Kim; Jelinek, V Michael; Scott, Ian A; Thompson, David R

2015-02-16

To measure changes in cardiovascular risk factors among patients with coronary heart disease (CHD) and/or type 2 diabetes enrolled in a centralised statewide coaching program delivered by telephone and mail-out in the public health sector in Queensland. A population-based audit of cardiovascular risk factor data collected prospectively as part of The COACH (Coaching Patients On Achieving Cardiovascular Health) Program (TCP) delivered through Queensland Health's Health Contact Centre. 1962 patients with CHD and 707 patients with type 2 diabetes who completed TCP from 20 February 2009 to 20 June 2013, of whom 145 were Indigenous Australians. Changes in fasting lipids, fasting glucose, glycosylated haemoglobin levels, blood pressure, body weight, body mass index, smoking, alcohol consumption and physical activity, as measured at entry to and completion of the program. Statistically significant improvements in cardiovascular risk factor status, from entry to completion of the program, were found across all biomedical and lifestyle factors in patients with CHD and/or type 2 diabetes. For both diseases, improvements in serum lipids, blood glucose, smoking habit and alcohol consumption combined with increases in physical activity were the most notable findings. Similar differences were found in mean change scores in cardiovascular risk factors between Indigenous and non-Indigenous Queenslanders. A centralised statewide coaching program delivered by telephone and mail-out overcomes obstacles of distance and limited access to health services and facilitates a guideline-concordant decrease in cardiovascular risk.

The enabling institutional context for integrated water management: lessons from Melbourne.

PubMed

Ferguson, Briony C; Brown, Rebekah R; Frantzeskaki, Niki; de Haan, Fjalar J; Deletic, Ana

2013-12-15

There is widespread international acceptance that climate change, demographic shifts and resource limitations impact on the performance of water servicing in cities. In response to these challenges, many scholars propose that a fundamental move away from traditional centralised infrastructure towards more integrated water management is required. However, there is limited practical or scholarly understanding of how to enable this change in practice and few modern cities have done so successfully. This paper addresses this gap by analysing empirical evidence of Melbourne's recent experience in shifting towards a hybrid of centralised and decentralised infrastructure to draw lessons about the institutional context that enabled this shift. The research was based on a qualitative single-case study, involving interviews and envisioning workshops with urban water practitioners who have been directly involved in Melbourne's water system changes. It was found that significant changes occurred in the cultural-cognitive, normative and regulative dimensions of Melbourne's water system. These included a shift in cultural beliefs for the water profession, new knowledge through evidence and learning, additional water servicing goals and priorities, political leadership, community pressure, better coordinated governance arrangements and strong market mechanisms. The paper synthesises lessons from the case study that, with further development, could form the basis of prescriptive guidance for enabling the shift to new modes of water servicing to support more liveable, sustainable and resilient outcomes for future cities. Copyright © 2013 Elsevier Ltd. All rights reserved.

Continuous and scalable polymer capsule processing for inertial fusion energy target shell fabrication using droplet microfluidics.

PubMed

Li, Jin; Lindley-Start, Jack; Porch, Adrian; Barrow, David

2017-07-24

High specification, polymer capsules, to produce inertial fusion energy targets, were continuously fabricated using surfactant-free, inertial centralisation, and ultrafast polymerisation, in a scalable flow reactor. Laser-driven, inertial confinement fusion depends upon the interaction of high-energy lasers and hydrogen isotopes, contained within small, spherical and concentric target shells, causing a nuclear fusion reaction at ~150 M°C. Potentially, targets will be consumed at ~1 M per day per reactor, demanding a 5000x unit cost reduction to ~$0.20, and is a critical, key challenge. Experimentally, double emulsions were used as templates for capsule-shells, and were formed at 20 Hz, on a fluidic chip. Droplets were centralised in a dynamic flow, and their shapes both evaluated, and mathematically modeled, before subsequent shell solidification. The shells were photo-cured individually, on-the-fly, with precisely-actuated, millisecond-length (70 ms), uniform-intensity UV pulses, delivered through eight, radially orchestrated light-pipes. The near 100% yield rate of uniform shells had a minimum 99.0% concentricity and sphericity, and the solidification processing period was significantly reduced, over conventional batch methods. The data suggest the new possibility of a continuous, on-the-fly, IFE target fabrication process, employing sequential processing operations within a continuous enclosed duct system, which may include cryogenic fuel-filling, and shell curing, to produce ready-to-use IFE targets.

Preschool and School Meal Policies: An Overview of What We Know about Regulation, Implementation, and Impact on Diet in the UK, Sweden, and Australia

PubMed Central

Sacks, Gary; Billich, Natassja; Evans, Charlotte Elizabeth Louise

2017-01-01

School meals make significant contributions to healthy dietary behaviour, at a time when eating habits and food preferences are being formed. We provide an overview of the approaches to the provision, regulation, and improvement of preschool and primary school meals in the UK, Sweden, and Australia, three countries which vary in their degree of centralisation and regulation of school meals. Sweden has a centralised approach; all children receive free meals, and a pedagogical approach to meals is encouraged. Legislation demands that meals are nutritious. The UK system is varied and decentralised. Meals in most primary schools are regulated by food-based standards, but preschool-specific meal standards only exist in Scotland. The UK uses food groups (starchy foods, fruit and vegetables, proteins and dairy) in a healthy plate approach. Australian States and Territories all employ guidelines for school canteen food, predominantly using a “traffic light” approach outlining recommended and discouraged foods; however, most children bring food from home and are not covered by this guidance. The preschool standards state that food provided should be nutritious. We find that action is often lacking in the preschool years, and suggest that consistent policies, strong incentives for compliance, systematic monitoring, and an acknowledgement of the broader school eating environment (including home provided food) would be beneficial. PMID:28696403

Process monitoring in intensive care with the use of cumulative expected minus observed mortality and risk-adjusted P charts.

PubMed

Cockings, Jerome G L; Cook, David A; Iqbal, Rehana K

2006-02-01

A health care system is a complex adaptive system. The effect of a single intervention, incorporated into a complex clinical environment, may be different from that expected. A national database such as the Intensive Care National Audit & Research Centre (ICNARC) Case Mix Programme in the UK represents a centralised monitoring, surveillance and reporting system for retrospective quality and comparative audit. This can be supplemented with real-time process monitoring at a local level for continuous process improvement, allowing early detection of the impact of both unplanned and deliberately imposed changes in the clinical environment. Demographic and UK Acute Physiology and Chronic Health Evaluation II (APACHE II) data were prospectively collected on all patients admitted to a UK regional hospital between 1 January 2003 and 30 June 2004 in accordance with the ICNARC Case Mix Programme. We present a cumulative expected minus observed (E-O) plot and the risk-adjusted p chart as methods of continuous process monitoring. We describe the construction and interpretation of these charts and show how they can be used to detect planned or unplanned organisational process changes affecting mortality outcomes. Five hundred and eighty-nine adult patients were included. The overall death rate was 0.78 of predicted. Calibration showed excess survival in ranges above 30% risk of death. The E-O plot confirmed a survival above that predicted. Small transient variations were seen in the slope that could represent random effects, or real but transient changes in the quality of care. The risk-adjusted p chart showed several observations below the 2 SD control limits of the expected mortality rate. These plots provide rapid analysis of risk-adjusted performance suitable for local application and interpretation. The E-O chart provided rapid easily visible feedback of changes in risk-adjusted mortality, while the risk-adjusted p chart allowed statistical evaluation. Local analysis of risk-adjusted mortality data with an E-O plot and a risk-adjusted p chart is feasible and allows the rapid detection of changes in risk-adjusted outcome of intensive care patients. This complements the centralised national database, which is more archival and comparative in nature.

Regulation of Clinical Trials with Advanced Therapy Medicinal Products in Germany.

PubMed

Renner, Matthias; Anliker, Brigitte; Sanzenbacher, Ralf; Schuele, Silke

2015-01-01

In the European Union, clinical trials for Advanced Therapy Medicinal Products are regulated at the national level, in contrast to the situation for a Marketing Authorisation Application, in which a centralised procedure is foreseen for these medicinal products. Although based on a common understanding regarding the regulatory requirement to be fulfilled before conduct of a clinical trial with an Advanced Therapy Investigational Medicinal Product, the procedures and partly the scientific requirements for approval of a clinical trial application differ between the European Union Member States. This chapter will thus give an overview about the path to be followed for a clinical trial application and the subsequent approval process for an Advanced Therapy Investigational Medicinal Product in Germany and will describe the role of the stakeholders that are involved. In addition, important aspects of manufacturing, quality control and non-clinical testing of Advanced Therapy Medicinal Products in the clinical development phase are discussed. Finally, current and future approaches for harmonisation of clinical trial authorisation between European Union Member States are summarised.

Community Cloud Computing

NASA Astrophysics Data System (ADS)

Marinos, Alexandros; Briscoe, Gerard

Cloud Computing is rising fast, with its data centres growing at an unprecedented rate. However, this has come with concerns over privacy, efficiency at the expense of resilience, and environmental sustainability, because of the dependence on Cloud vendors such as Google, Amazon and Microsoft. Our response is an alternative model for the Cloud conceptualisation, providing a paradigm for Clouds in the community, utilising networked personal computers for liberation from the centralised vendor model. Community Cloud Computing (C3) offers an alternative architecture, created by combing the Cloud with paradigms from Grid Computing, principles from Digital Ecosystems, and sustainability from Green Computing, while remaining true to the original vision of the Internet. It is more technically challenging than Cloud Computing, having to deal with distributed computing issues, including heterogeneous nodes, varying quality of service, and additional security constraints. However, these are not insurmountable challenges, and with the need to retain control over our digital lives and the potential environmental consequences, it is a challenge we must pursue.

Contagious equine metritis: artificial reproduction changes the epidemiologic paradigm.

PubMed

Schulman, Martin Lance; May, Catherine Edith; Keys, Bronwyn; Guthrie, Alan John

2013-11-29

Recent CEM outbreak reports reflect a novel epidemiologic manifestation with a markedly different risk association for transmission via artificial reproduction and subsequent to inadvertent importation of unapparent carrier stallions. Artificial breeding has an increased association with horizontal or fomite-associated transmission. Reported risk factors include inadequate biosecurity protocols at centralised breeding facilities associated with stallion management and methods of semen collection, processing and transport. Detection of carriers is based on traditional bacteriology from genital swabs and despite limitations inherent to Taylorella equigenitalis is currently the gold standard applied in all international trade and movement protocols. These limitations are reported to be overcome by PCR assays improving diagnostic sensitivity and specificity, practicality, turn-around times, through-put and cost efficacy. Molecular methods have increased understanding of the Taylorelleae, facilitate epidemiologic surveillance and outbreak control strategies. Validation and international regulatory acceptance of a robust PCR-based assay and the undefined risks in association with cryopreserved semen and embryos are future areas warranting further investigation. Copyright © 2013 Elsevier B.V. All rights reserved.

[Safety monitoring of cell-based medicinal products (CBMPs)].

PubMed

Funk, Markus B; Frech, Marion; Spranger, Robert; Keller-Stanislawski, Brigitte

2015-11-01

Cell-based medicinal products (CBMPs), a category of advanced-therapy medicinal products (ATMPs), are authorised for the European market by the European Commission by means of the centralized marketing authorisation. By conforming to the German Medicinal Products Act (Sec. 4b AMG), national authorisation can be granted by the Paul-Ehrlich-Institut in Germany exclusively for ATMPs not based on a routine manufacturing procedure. In both procedures, quality, efficacy, and safety are evaluated and the risk-benefit balance is assessed. For the centralised procedure, mainly controlled clinical trial data must be submitted, whereas the requirements for national procedures could be modified corresponding to the stage of development of the ATMP. After marketing authorization, the marketing authorization/license holder is obligated to report all serious adverse reactions to the competent authority and to provide periodic safety update reports. If necessary, post-authorization safety studies could be imposed. On the basis of these regulatory measures, the safety of advanced therapies can be monitored and improved.

JANIS-2: An Improved Version of the NEA Java-based Nuclear Data Information System

NASA Astrophysics Data System (ADS)

Soppera, N.; Henriksson, H.; Nouri, A.; Nagel, P.; Dupont, E.

2005-05-01

JANIS (JAva-based Nuclear Information Software) is a display program designed to facilitate the visualisation and manipulation of nuclear data. Its objective is to allow the user of nuclear data to access numerical and graphical representations without prior knowledge of the storage format. It offers maximum flexibility for the comparison of different nuclear data sets. Features included in the latest release are described such as direct access to centralised databases through JAVA Servlet technology.

JANIS-2: An Improved Version of the NEA Java-based Nuclear Data Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soppera, N.; Henriksson, H.; Nagel, P.

2005-05-24

JANIS (JAva-based Nuclear Information Software) is a display program designed to facilitate the visualisation and manipulation of nuclear data. Its objective is to allow the user of nuclear data to access numerical and graphical representations without prior knowledge of the storage format. It offers maximum flexibility for the comparison of different nuclear data sets. Features included in the latest release are described such as direct access to centralised databases through JAVA Servlet technology.

Integration of analytical measurements and wireless communications--current issues and future strategies.

PubMed

Diamond, Dermot; Lau, King Tong; Brady, Sarah; Cleary, John

2008-05-15

Rapid developments in wireless communications are opening up opportunities for new ways to perform many types of analytical measurements that up to now have been restricted in scope due to the need to have access to centralised facilities. This paper will address both the potential for new applications and the challenges that currently inhibit more widespread integration of wireless communications with autonomous sensors and analytical devices. Key issues are identified and strategies for closer integration of analytical information and wireless communications systems discussed.

Economics of total energy schemes in the liberalised European energy market

NASA Astrophysics Data System (ADS)

Lampret, Peter

This thesis is concerned with the liberalisation of the European Energy markets and the affects this has had on total energy systems. The work concentrates on a number of case studies all of which are located in the area surrounding Gelsenkirchen - Bottrop - Gladbeck, the centre of the Ruhr region of Germany.The thesis describes briefly how the legislation of the parliament of the extended European Union has been interpreted and enacted into German legislation and its affects on production, transport, sales and customers. Primarily the legislation has been enacted to reduce energy costs by having a competitive market while enabling security of supply. The legislation whose development has accelerated since 1999 can lead to negative effects and these have been highlighted for the case studies chosen.The legislation and technological advances, each of them successful by themselves, do not provide the expected reduction of carbon dioxide emissions when applied to total energy system. The introduction of human behaviour as a missing link makes the problems evident and gives a theoretical basis to overcome these problems. The hypothesis is proven by eight detailed research projects and four concisely described ones.The base of the research is the experience gained on approximately 1,000 operation years of the simplest total energy system, that of centralised heating. This experience is transferred to different solutions for total energy systems and their economics in combination with the changing legislation and observation of human behaviour.The variety of topics of the case studies includes the production of heat by boiler, solar or combined heat and power and the use of fuel cells. Additionally the transfer of heat, at the place of demand is considered, either as an individual boiler in a building or as de-centralised district heating.The various results of these projects come together in a final project which covers four different heating systems in identical buildings each with five apartments.Based on the experience described a schematic of the energy system is developed demonstrating the interdependence of actors within energy systems, the energy system itself and the outer frame which includes legislation and the environment. In parallel a financial solution is proposed for a future carbon dioxide free heating and hot potable water supply.To combine both systems a missing link that of human behaviour is introduced. This linkage requires changes of legislation which are described.The solution proposed enables future energy consumption and in parallel the reduction of carbon dioxide emissions.

Economics of total energy schemes in the liberalised European energy market

NASA Astrophysics Data System (ADS)

Lampret, Peter

This thesis is concerned with the liberalisation of the European Energy markets and the affects this has had on total energy systems. The work concentrates on a number of case studies all of which are located in the area surrounding Gelsenkirchen - Bottrop - Gladbeck, the centre of the Ruhr region of Germany. The thesis describes briefly how the legislation of the parliament of the extended European Union has been interpreted and enacted into German legislation and its affects on production, transport, sales and customers. Primarily the legislation has been enacted to reduce energy costs by having a competitive market while enabling security of supply. The legislation whose development has accelerated since 1999 can lead to negative effects and these have been highlighted for the case studies chosen. The legislation and technological advances, each of them successful by themselves, do not provide the expected reduction of carbon dioxide emissions when applied to total energy system. The introduction of human behaviour as a missing link makes the problems evident and gives a theoretical basis to overcome these problems. The hypothesis is proven by eight detailed research projects and four concisely described ones. The base of the research is the experience gained on approximately 1,000 operation years of the simplest total energy system, that of centralised heating. This experience is transferred to different solutions for total energy systems and their economics in combination with the changing legislation and observation of human behaviour. The variety of topics of the case studies includes the production of heat by boiler, solar or combined heat and power and the use of fuel cells. Additionally the transfer of heat, at the place of demand is considered, either as an individual boiler in a building or as de-centralised district heating. The various results of these projects come together in a final project which covers four different heating systems in identical buildings each with five apartments. Based on the experience described a schematic of the energy system is developed demonstrating the interdependence of actors within energy systems, the energy system itself and the outer frame which includes legislation and the environment. In parallel a financial solution is proposed for a future carbon dioxide free heating and hot potable water supply. To combine both systems a missing link that of human behaviour is introduced. This linkage requires changes of legislation which are described. The solution proposed enables future energy consumption and in parallel the reduction of carbon dioxide emissions.

Development of a national electronic interval cancer review for breast screening

NASA Astrophysics Data System (ADS)

Halling-Brown, M. D.; Patel, M. N.; Wallis, M. G.; Young, K. C.

2018-03-01

Reviewing interval cancers and prior screening mammograms are a key measure to monitor screening performance. Radiological analysis of the imaging features in prior mammograms and retrospective classification are an important educational tool for readers to improve individual performance. The requirements of remote, collaborative image review sessions, such as those required to run a remote interval cancer review, are variable and demand a flexible and configurable software solution that is not currently available on commercial workstations. The wide range of requirements for both collection and remote review of interval cancers has precipitated the creation of extensible medical image viewers and accompanying systems. In order to allow remote viewing, an application has been designed to allow workstation-independent, PACS-less viewing and interaction with medical images in a remote, collaborative manner, providing centralised reporting and web-based feedback. A semi-automated process, which allows the centralisation of interval cancer cases, has been developed. This stand-alone, flexible image collection toolkit provides the extremely important function of bespoke, ad-hoc image collection at sites where there is no dedicated hardware. Web interfaces have been created which allow a national or regional administrator to organise, coordinate and administer interval cancer review sessions and deploy invites to session members to participate. The same interface allows feedback to be analysed and distributed. The eICR provides a uniform process for classifying interval cancers across the NHSBSP, which facilitates rapid access to a robust 'external' review for patients and their relatives seeking answers about why their cancer was 'missed'.

Compounding diagnostic delays: a qualitative study of point-of-care testing in South Africa.

PubMed

Engel, Nora; Davids, Malika; Blankvoort, Nadine; Pai, Nitika Pant; Dheda, Keertan; Pai, Madhukar

2015-04-01

Successful point-of-care (POC) testing (completion of test-and-treat cycle in one patient encounter) has immense potential to reduce diagnostic and treatment delays, and improve patient and public health outcomes. We explored what tests are done and how in public/private, rural/urban hospitals and clinics in South Africa and whether they can ensure successful POC testing. This qualitative research study examined POC testing across major diseases in Cape Town, Durban and Eastern Cape. We conducted 101 semi-structured interviews and seven focus group discussions with doctors, nurses, community health workers, patients, laboratory technicians, policymakers, hospital managers and diagnostic manufacturers. In South Africa, diagnostics are characterised by a centralised system. Most tests conducted on the spot can be made to work successfully as POC tests. The majority of public/private clinics and smaller hospitals send samples via couriers to centralised laboratories and retrieve results the same way, via internet, fax or phone. The main challenge to POC testing lies in transporting samples and results, while delays risk patient loss from diagnostic/treatment pathways. Strategies to deal with associated delays create new problems, such as artificially prolonged turnaround times, strains on human resources and quality of testing, compounding additional diagnostic and treatment delays. For POC testing to succeed, particular characteristics of diagnostic ecosystems and adaptations of professional practices to overcome associated challenges must be taken into account. © 2014 John Wiley & Sons Ltd.

Where is industry getting it wrong? A review of quality concerns raised at Day 120 by the Committee For Medicinal Products for Human Use during European Centralised Marketing Authorisation Submissions for Chemical Entity Medicinal Products.

PubMed

Borg, John Joseph; Robert, Jean-Louis; Wade, George; Aislaitner, George; Pirozynski, Michal; Abadie, Eric; Salmonson, Tomas; Vella Bonanno, Patricia

2009-01-01

The aim of this study was to identify common trends in the deficiencies identified in the quality part of the dossier during the evaluation of marketing authorisation applications for medicinal products for human use submitted through the EU's centralised procedure. We analysed all the adopted Day 120 list of questions on the quality module of 52 marketing authorisation applications for chemical entity medicinal products submitted to the European Medicines Agency and evaluated by the Committee for Medicinal Products for Human Use (CHMP), during 12 consecutive plenary meetings held in 2007 and 2008. Subsequently we calculated the frequency of common deficiencies identified across these applications. Frequencies and trends on quality deficiencies have been recorded and presented for 52 marketing authorisation applications. 32 "Major Objections" originated from 13 marketing authorisation applications. 13 concerned were raised regarding drug substances and 19 for drug products. Furthermore, 905 concerns on drug substance and 1,054 on drug product were also adopted. The impact of the frequencies and trends in quality deficiencies that were identified are discussed from a regulatory point of view. It is expected that the results of this study will not only be of interest to pharmaceutical companies but will also aid regulators' in obtaining consistent information on drug products based on transparent rules safeguarding the necessary pharmaceutical quality of medicinal products.

Major influence of interobserver reliability on polytrauma identification with the Injury Severity Score (ISS): Time for a centralised coding in trauma registries?

PubMed

Maduz, Roman; Kugelmeier, Patrick; Meili, Severin; Döring, Robert; Meier, Christoph; Wahl, Peter

2017-04-01

The Abbreviated Injury Scale (AIS) and the Injury Severity Score (ISS) find increasingly widespread use to assess trauma burden and to perform interhospital benchmarking through trauma registries. Since 2015, public resource allocation in Switzerland shall even be derived from such data. As every trauma centre is responsible for its own coding and data input, this study aims at evaluating interobserver reliability of AIS and ISS coding. Interobserver reliability of the AIS and ISS is analysed from a cohort of 50 consecutive severely injured patients treated in 2012 at our institution, coded retrospectively by 3 independent and specifically trained observers. Considering a cutoff ISS≥16, only 38/50 patients (76%) were uniformly identified as polytraumatised or not. Increasing the cut off to ≥20, this increased to 41/50 patients (82%). A difference in the AIS of ≥ 1 was present in 261 (16%) of possible codes. Excluding the vast majority of uninjured body regions, uniformly identical AIS severity values were attributed in 67/193 (35%) body regions, or 318/579 (55%) possible observer pairings. Injury severity all too often is neither identified correctly nor consistently when using the AIS. This leads to wrong identification of severely injured patients using the ISS. Improving consistency of coding through centralisation is recommended before scores based on the AIS are to be used for interhospital benchmarking and resource allocation in the treatment of severely injured patients. Copyright © 2017. Published by Elsevier Ltd.

A pragmatic randomised controlled trial assessing the non-inferiority of counselling for depression versus cognitive-behaviour therapy for patients in primary care meeting a diagnosis of moderate or severe depression (PRaCTICED): Study protocol for a randomised controlled trial.

PubMed

Saxon, David; Ashley, Kate; Bishop-Edwards, Lindsey; Connell, Janice; Harrison, Phillippa; Ohlsen, Sally; Hardy, Gillian E; Kellett, Stephen; Mukuria, Clara; Mank, Toni; Bower, Peter; Bradburn, Mike; Brazier, John; Elliott, Robert; Gabriel, Lynne; King, Michael; Pilling, Stephen; Shaw, Sue; Waller, Glenn; Barkham, Michael

2017-03-01

NICE guidelines state cognitive behavioural therapy (CBT) is a front-line psychological treatment for people presenting with depression in primary care. Counselling for Depression (CfD), a form of Person-Centred Experiential therapy, is also offered within Improving Access to Psychological Therapies (IAPT) services for moderate depression but its effectiveness for severe depression has not been investigated. A full-scale randomised controlled trial to determine the efficacy and cost-effectiveness of CfD is required. PRaCTICED is a two-arm, parallel group, non-inferiority randomised controlled trial comparing CfD against CBT. It is embedded within the local IAPT service using a stepped care service delivery model where CBT and CfD are routinely offered at step 3. Trial inclusion criteria comprise patients aged 18 years or over, wishing to work on their depression, judged to require a step 3 intervention, and meeting an ICD-10 diagnosis of moderate or severe depression. Patients are randomised using a centralised, web-based system to CfD or CBT with each treatment being delivered up to a maximum 20 sessions. Both interventions are manualised with treatment fidelity tested via supervision and random sampling of sessions using adherence/competency scales. The primary outcome measure is the Patient Health Questionnaire-9 collected at baseline, 6 and 12 months. Secondary outcome measures tap depression, generic psychological distress, anxiety, functioning and quality of life. Cost-effectiveness is determined by a patient service receipt questionnaire. Exit interviews are conducted with patients by research assessors blind to treatment allocation. The trial requires 500 patients (250 per arm) to test the non-inferiority hypothesis of -2 PHQ-9 points at the one-sided, 2.5% significance level with 90% power, assuming no underlying difference and a standard deviation of 6.9. The primary analysis will be undertaken on all patients randomised (intent to treat) alongside per-protocol and complier-average causal effect analyses as recommended by the extension to the CONSORT statement for non-inferiority trials. This large-scale trial utilises routinely collected outcome data as well as specific trial data to provide evidence of the comparative efficacy and cost-effectiveness of Counselling for Depression compared with Cognitive Behaviour Therapy as delivered within the UK government's Improving Access to Psychological Therapies initiative. Controlled Trials ISRCTN Registry, ISRCTN06461651 . Registered on 14 September 2014.

Controlling female cancer in Argentina. Divergent initiatives and the road to fragmentation

PubMed Central

Eraso, Yolanda

2014-01-01

This article analyses the organisation of cancer control in Argentina, with a special focus on the initiatives, institutions, and models that targeted female or gynaecological cancers. It identifies and examines the main factors in the process of elaborating a national policy to control the disease drawing on a series of actors and instruments such as the state, medical professionals, institutions and services, and the use of technology (notably diagnostic tools) for the detection of the disease. It traces the developments in the organisation highlighting its transformations from a centralising to a decentralised model of service provision. Using the concept of «path-dependence» the article examines the continuities and changes observed in the organisation of female cancer critically signalling the particular time at which a path was taken where «fragmentation» became consolidated within the health system. It also argues that it was within the field of cancer diagnosis that Argentinian doctors first sought to create the foundational structures of cancer organisation. The article contends that the path-dependence analytical approach helps us acknowledge the importance of historical analysis in the identification of factors that led to the lack of service coordination, including the persistent strain between national/provincial states that hampered the development of comprehensive programmes, aspects that have continued to mark efforts in the elaboration of cancer policies to the present day. PMID:24944432

Controlling female cancer in Argentina. Divergent initiatives and the road to fragmentation.

PubMed

Eraso, Yolanda

2014-01-01

This article analyses the organisation of cancer control in Argentina, with a special focus on the initiatives, institutions, and models that targeted female or gynaecological cancers. It identifies and examines the main factors in the process of elaborating a national policy to control the disease drawing on a series of actors and instruments such as the state, medical professionals, institutions and services, and the use of technology (notably diagnostic tools) for the detection of the disease. It traces the developments in the organisation highlighting its transformations from a centralising to a decentralised model of service provision. Using the concept of "path-dependence" the article examines the continuities and changes observed in the organisation of female cancer critically signalling the particular time at which a path was taken where "fragmentation" became consolidated within the health system. It also argues that it was within the field of cancer diagnosis that Argentinian doctors first sought to create the foundational structures of cancer organisation. The article contends that the path-dependence analytical approach helps us acknowledge the importance of historical analysis in the identification of factors that led to the lack of service coordination, including the persistent strain between national/provincial states that hampered the development of comprehensive programmes, aspects that have continued to mark efforts in the elaboration of cancer policies to the present day.

The European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP)--a sentinel approach in the European Union (EU)/European Economic Area (EEA).

PubMed

Spiteri, Gianfranco; Cole, Michelle; Unemo, Magnus; Hoffmann, Steen; Ison, Catherine; van de Laar, Marita

2013-12-01

Antimicrobial resistance in Neisseria gonorrhoeae is monitored in the European Union/European Economic Area through the European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP) coordinated by the European Centre for Disease Prevention and Control. Euro-GASP includes a sentinel surveillance programme which aims to detect in a timely manner changes in resistance patterns and inform treatment guidelines. The programme aims to test a representative number of isolates from each European Union/European Economic Area member state per year for a range of therapeutically relevant antimicrobials through a biannual hybrid centralised/decentralised system. Testing is supported by an External Quality Assurance programme and a laboratory training programme. Participation in the programme has increased to 21 countries in 2012. Euro-GASP has been able to detect the rapid spread of isolates with decreased susceptibility to cefixime across Europe in 2010 and 2011. Results from the programme have informed changes in European treatment guidelines for gonorrhoea and led to the development of the 'Response plan to control and manage the threat of multidrug resistant gonorrhoea in Europe'. Future challenges for Euro-GASP include supporting countries to participate in Euro-GASP through decentralised testing, improving timeliness and epidemiological data quality, and increasing participation from Eastern Europe.

The ESA FRM4DOAS project: Towards a quality-controlled MAXDOAS Centralized Processing System

NASA Astrophysics Data System (ADS)

Hendrick, Francois; Fayt, Caroline; Friess, Udo; Kreher, Karin; Piters, Ankie; Richter, Andreas; Wagner, Thomas; Cede, Alexander; Spinei, Elena; von Bismarck, Jonas; Fehr, Thorsten; Van Roozendael, Michel

2017-04-01

The Fiducial Reference Measurements for Ground-Based DOAS Air-Quality Observations (FRM4DOAS) is a two-year project funded by the European Space Agency (ESA). Started in July 2016, FRM4DOAS aims at further harmonizing MAXDOAS measurements and data sets, through (1) the specification of best practices for instrument operation, (2) the selection of state-of-the art retrieval algorithms, procedures, and settings, (3) the demonstration of a centralised rapid-delivery (6-24h latency) processing system for MAXDOAS instruments to be operated within the international Network for the Detection of Atmospheric Composition Change (NDACC). The project also links with the Pandonia initiative. In a first phase, the system concentrates on the development of 3 key products: NO2 vertical profiles, total O3 and tropospheric HCHO profiles, which will be retrieved at 11 MAXDOAS pilot stations. The system will also be tested and validated on data from the CINDI-2 campaign, and designed to allow further extension after commissioning. These activities will help and guarantee that homogenous, fully traceable, and quality-controlled datasets are generated from reference ground-based UV-vis instruments, which will play a crucial role in the validation of future ESA/Copernicus Sentinel satellite missions S-5P, S-4, and S-5.

From home, to market, to headquarters, to home. Relocating health services planning and purchasing in New Zealand.

PubMed

Gauld, Robin

2002-01-01

Health sector restructuring has been in vogue, but no country has engaged in as much health sector restructuring as New Zealand where, in a decade, there have been four different public health sector structures. This article discusses New Zealand's four structures with an emphasis on relocating the critical functions of health care planning and purchasing, and on the development of the present district health board system. The four structures include: an area health board system (1989-1991) with planning and purchasing located at "home" in local areas and closely aligned with service provision; a competitive internal market system (1993-1996) which separated planning and purchasing from service provision; a centralised system with a "headquarters" controlling planning and purchasing (1997-1999) while maintaining the distance from provision; and the district health board system currently under development (1999-) which sees purchasing and planning sent home again to regions and linked closely with service provision. The present system entails the devolution of considerable responsibility to the local level, within a framework of strong central government control. Based on New Zealand's experience, the article notes that all but the market structure appear to have provided an adequate environment for effective health care planning and purchasing.

Reducing the land use of EU pork production: where there’s swill, there’s a way

PubMed Central

zu Ermgassen, Erasmus K.H.J.; Phalan, Ben; Green, Rhys E.; Balmford, Andrew

2016-01-01

Livestock production occupies approximately 75% of agricultural land, consumes 35% of the world’s grain, and produces 14.5% of anthropogenic greenhouse gas emissions. With demand for meat and dairy products forecast to increase 60% by 2050, there is a pressing need to reduce the footprint of livestock farming. Food wastes have a long history as a source of environmentally benign animal feed, but their inclusion in feed is currently banned in the EU because of disease control concerns. A number of East Asian states have in the last 20 years, however, introduced regulated, centralised systems for safely recycling food wastes into animal feed. This study quantifies the land use savings that could be realised by changing EU legislation to promote the use of food wastes as animal feed and reviews the policy, public, and industry barriers to the use of food waste as feed. Our results suggest that the application of existing technologies could reduce the land use of EU pork (20% of world production) by one fifth, potentially saving 1.8 million hectares of agricultural land. While swill presents a low-cost, low-impact animal feed, widespread adoption would require efforts to address consumer and farmer concerns over food safety and disease control. PMID:26949285

Reducing the land use of EU pork production: where there's swill, there's a way.

PubMed

Zu Ermgassen, Erasmus K H J; Phalan, Ben; Green, Rhys E; Balmford, Andrew

2016-01-01

Livestock production occupies approximately 75% of agricultural land, consumes 35% of the world's grain, and produces 14.5% of anthropogenic greenhouse gas emissions. With demand for meat and dairy products forecast to increase 60% by 2050, there is a pressing need to reduce the footprint of livestock farming. Food wastes have a long history as a source of environmentally benign animal feed, but their inclusion in feed is currently banned in the EU because of disease control concerns. A number of East Asian states have in the last 20 years, however, introduced regulated, centralised systems for safely recycling food wastes into animal feed. This study quantifies the land use savings that could be realised by changing EU legislation to promote the use of food wastes as animal feed and reviews the policy, public, and industry barriers to the use of food waste as feed. Our results suggest that the application of existing technologies could reduce the land use of EU pork (20% of world production) by one fifth, potentially saving 1.8 million hectares of agricultural land. While swill presents a low-cost, low-impact animal feed, widespread adoption would require efforts to address consumer and farmer concerns over food safety and disease control.

SMART-1: key technologies and autonomy implementations

NASA Astrophysics Data System (ADS)

Elfving, A.; Stagnaro, L.; Winton, A.

2003-01-01

SMART-1 is the first of the Small Missions for Advanced Research in Technology of the ESA Horizons 2000 Science Plan. The main mission objective of SMART-1 is to demonstrate innovative and key technologies for scientific deep-space missions. One of the key technologies is the solar electric propulsion used as primary propulsion. The electric propulsion will be using 1400 W to transfer the 350 kg spacecraft from an Ariane 5 standard GTO to an elliptic Moon polar orbit, 10000×300 km. The total mission time is 24 months including a maximum of 18 months transfer time. The spacecraft development entered the detailed design and implementation phase in October 1999, under the responsibility of the Swedish Space Cooperation as prime contractor, and the flight acceptance is targeted for the 3rd quarter of 2002. The committed total life cost budget is 84 million Euro. Apart from the in-orbit demonstration of electric propulsion as primary propulsion, SMART-1 is implementing many other enabling technologies for deep-space missions such as deep-space transponder with communication in X-band for uplink and in X- and Ka-band for downlink, highly integrated and radiation tolerant microprocessors, FPGAs and memories, high on-board autonomy driven by ground communication only once per 4 days, maximum available power to electric propulsion by centralised and software-controlled power management, minimum propellant consumption through innovative angular momentum management. In addition, the spacecraft avionics design is tailored to the low-cost philosophy by enabling flexible integration of commercial off the shelf (COTS) equipment. The scientific instruments, five in total, support characterisation of the electric propulsion thrust environment during the long transfer phase and detailed imaging and spectroscopy of the lunar surface in visible, infrared and X-ray during the Moon orbiting phase. Several of the instruments implement new enabling technologies, e.g. swept charge devices for the X-ray spectrometer and quarts gratings for the near-infrared reflectance spectrometer. The paper summarises the baseline mission design, the projected scientific and technology output, and describe the spacecraft bus design. The main part of the paper highlights and elaborate on a number of spacecraft bus technologies; the on-board autonomy, the avionics design, and the X/Ka-band transponder.

Cocaine profiling for strategic intelligence, a cross-border project between France and Switzerland: part II. Validation of the statistical methodology for the profiling of cocaine.

PubMed

Lociciro, S; Esseiva, P; Hayoz, P; Dujourdy, L; Besacier, F; Margot, P

2008-05-20

Harmonisation and optimization of analytical and statistical methodologies were carried out between two forensic laboratories (Lausanne, Switzerland and Lyon, France) in order to provide drug intelligence for cross-border cocaine seizures. Part I dealt with the optimization of the analytical method and its robustness. This second part investigates statistical methodologies that will provide reliable comparison of cocaine seizures analysed on two different gas chromatographs interfaced with a flame ionisation detectors (GC-FIDs) in two distinct laboratories. Sixty-six statistical combinations (ten data pre-treatments followed by six different distance measurements and correlation coefficients) were applied. One pre-treatment (N+S: area of each peak is divided by its standard deviation calculated from the whole data set) followed by the Cosine or Pearson correlation coefficients were found to be the best statistical compromise for optimal discrimination of linked and non-linked samples. The centralisation of the analyses in one single laboratory is not a required condition anymore to compare samples seized in different countries. This allows collaboration, but also, jurisdictional control over data.

Big data analytics as a service infrastructure: challenges, desired properties and solutions

NASA Astrophysics Data System (ADS)

Martín-Márquez, Manuel

2015-12-01

CERN's accelerator complex generates a very large amount of data. A large volumen of heterogeneous data is constantly generated from control equipment and monitoring agents. These data must be stored and analysed. Over the decades, CERN's researching and engineering teams have applied different approaches, techniques and technologies for this purpose. This situation has minimised the necessary collaboration and, more relevantly, the cross data analytics over different domains. These two factors are essential to unlock hidden insights and correlations between the underlying processes, which enable better and more efficient daily-based accelerator operations and more informed decisions. The proposed Big Data Analytics as a Service Infrastructure aims to: (1) integrate the existing developments; (2) centralise and standardise the complex data analytics needs for CERN's research and engineering community; (3) deliver real-time, batch data analytics and information discovery capabilities; and (4) provide transparent access and Extract, Transform and Load (ETL), mechanisms to the various and mission-critical existing data repositories. This paper presents the desired objectives and properties resulting from the analysis of CERN's data analytics requirements; the main challenges: technological, collaborative and educational and; potential solutions.

Reducing the risk of invasive forest pests and pathogens: Combining legislation, targeted management and public awareness.

PubMed

Klapwijk, Maartje J; Hopkins, Anna J M; Eriksson, Louise; Pettersson, Maria; Schroeder, Martin; Lindelöw, Åke; Rönnberg, Jonas; Keskitalo, E Carina H; Kenis, Marc

2016-02-01

Intensifying global trade will result in increased numbers of plant pest and pathogen species inadvertently being transported along with cargo. This paper examines current mechanisms for prevention and management of potential introductions of forest insect pests and pathogens in the European Union (EU). Current European legislation has not been found sufficient in preventing invasion, establishment and spread of pest and pathogen species within the EU. Costs associated with future invasions are difficult to estimate but past invasions have led to negative economic impacts in the invaded country. The challenge is combining free trade and free movement of products (within the EU) with protection against invasive pests and pathogens. Public awareness may mobilise the public for prevention and detection of potential invasions and, simultaneously, increase support for eradication and control measures. We recommend focus on commodities in addition to pathways, an approach within the EU using a centralised response unit and, critically, to engage the general public in the battle against establishment and spread of these harmful pests and pathogens.

[Regional health agencies: only sham autonomy two years later].

PubMed

Rolland, Christine; Pierru, Frédéric

2013-01-01

From the outset, reform of regional health agencies in France, has been torn between two conflicting approaches: traditional state planning and the more recent New Public Management. In fact, the "Hôpital Patients Santá Territoires" (Hospital Patients Health Territories) bill juxtaposes rather than supplants these conflicting approaches. Based on a sociological and qualitative survey conducted nationwide and in three regional health agencies, this article highlights the contradictions in which regional health agency management is entangled and how it tries to accommodate them in its everyday professional activity. Officially, and paradoxically, regional agencies are required to be "autonomous" and "innovative" to ensure more "territorialized" health policies, but in fact, they are caught in a meshwork of somewhat arbitrary national regulatory and budgetary controls that are very similar to the traditional French model of administration. In the light of the example of three different schemes of regional/territorial delegation regulations, this article shows how the various stakeholders are nevertheless trying to innovate even if, ultimately, they are faced with a more traditional, centralised healthcare system with decreased participation at the more local levels.

Physician staffed helicopter emergency medical service dispatch via centralised control or directly by crew - case identification rates and effect on the Sydney paediatric trauma system.

PubMed

Garner, Alan A; Lee, Anna; Weatherall, Andrew

2012-12-18

Severe paediatric trauma patients benefit from direct transport to dedicated Paediatric Trauma Centres (PTC). Parallel case identification systems utilising paramedics from a centralised dispatch centre versus the crew of a physician staffed Helicopter Emergency Medical Service (HEMS) allowed comparison of the two systems for case identification rates and subsequent timeliness of direct transfer to a PTC. Paediatric trauma patients over a two year period from the Sydney region with an Injury Severity Score (ISS) > 15 were retrospectively identified from a state wide trauma registry. Overall paediatric trauma system performance was assessed by comparisons of the availability of the physician staffed HEMS for patient characteristics, transport mode (direct versus indirect) and the times required for the patient to arrive at the paediatric trauma centre. The proportion of patients transported directly to a PTC was compared between the times that the HEMS service was available versus the time that it was unavailable to determine if the HEMS system altered the rate of direct transport to a PTC. Analysis of variance was used to compare the identifying systems for various patient characteristics when the HEMS was available. Ninety nine cases met the inclusion criteria, 44 when the HEMS system was operational. Patients identified for physician response by the HEMS system were significantly different to those that were not identified with higher median ISS (25 vs 18, p = 0.011), and shorter times to PTC (67 vs 261mins, p = 0.015) and length of intensive care unit stays (2 vs 0 days, p = 0.045). Of the 44 cases, 21 were not identified, 3 were identified by the paramedic system and 20 were identified by the HEMS system, (P < 0.001). Direct transport to a PTC was more likely to occur when the HEMS dispatch system was available (RR 1.81, 95% CI 1.20-2.73). The median time (minutes) to arrival at the PTC was shorter when HEMS available (HEMS available 92, IQR 50-261 versus HEMS unavailable 296, IQR 84-583, P < 0.01). Physician staffed HEMS crew dispatch is significantly more likely to identify cases of severe paediatric trauma and is associated with a greater proportion of transports directly to a PTC and with faster times to arrival.

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches

PubMed Central

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P.; Berg, Marc

2007-01-01

Background To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. Objectives To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Case study Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Results Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one “centralised” and the other “decentralised” have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. Conclusion The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes. PMID:17627296

MedXViewer: an extensible web-enabled software package for medical imaging

NASA Astrophysics Data System (ADS)

Looney, P. T.; Young, K. C.; Mackenzie, Alistair; Halling-Brown, Mark D.

2014-03-01

MedXViewer (Medical eXtensible Viewer) is an application designed to allow workstation-independent, PACS-less viewing and interaction with anonymised medical images (e.g. observer studies). The application was initially implemented for use in digital mammography and tomosynthesis but the flexible software design allows it to be easily extended to other imaging modalities. Regions of interest can be identified by a user and any associated information about a mark, an image or a study can be added. The questions and settings can be easily configured depending on the need of the research allowing both ROC and FROC studies to be performed. The extensible nature of the design allows for other functionality and hanging protocols to be available for each study. Panning, windowing, zooming and moving through slices are all available while modality-specific features can be easily enabled e.g. quadrant zooming in mammographic studies. MedXViewer can integrate with a web-based image database allowing results and images to be stored centrally. The software and images can be downloaded remotely from this centralised data-store. Alternatively, the software can run without a network connection where the images and results can be encrypted and stored locally on a machine or external drive. Due to the advanced workstation-style functionality, the simple deployment on heterogeneous systems over the internet without a requirement for administrative access and the ability to utilise a centralised database, MedXViewer has been used for running remote paper-less observer studies and is capable of providing a training infrastructure and co-ordinating remote collaborative viewing sessions (e.g. cancer reviews, interesting cases).

Facilitating access to surgical care through a decentralised case-finding strategy: experience in Madagascar

PubMed Central

Hamer, Mirjam; Biddell, Jasmin; Claus, Nathan; Randall, Kirsten; Alcorn, Dennis; Parker, Gary; Shrime, Mark G

2017-01-01

Over two-thirds of the world’s population lack access to surgical care. Non-governmental organisation’s providing free surgeries may overcome financial barriers, but other barriers to care still exist. This analysis paper discusses two different case-finding strategies in Madagascar that aimed to increase the proportion of poor patients, women and those for whom multiple barriers to care exist. From October 2014 to June 2015, we used a centralised selection strategy, aiming to find 70% of patients from the port city, Toamasina, and 30% from the national capital and two remote cities. From August 2015 to June 2016, a decentralised strategy was used, aiming to find 30% of patients from Toamasina and 70% from 11 remote locations, including the capital. Demographic information and self-reported barriers to care were collected. Wealth quintile was calculated for each patient using a combination of participant responses to asset-related and demographic questions, and publicly available data. A total of 2971 patients were assessed. The change from centralised to decentralised selection resulted in significantly poorer patients undergoing surgery. All reported barriers to prior care, except for lack of transportation, were significantly more likely to be identified in the decentralised group. Patients who identified multiple barriers to prior surgical care were less likely to be from the richest quintile (p=0.037) and more likely to be in the decentralised group (p=0.046). Our country-specific analysis shows that decentralised patient selection strategies may be used to overcome barriers to care and allow patients in greatest need to access surgical care. PMID:29071129

Intelligent Reconfigurable System with Self-Dammage Assessmentand Control Stress Capabilities

NASA Astrophysics Data System (ADS)

Trivailo, P.; Plotnikova, L.; Kao, T. W.

2002-01-01

Modern space structures are constructed using a modular approach that facilitates their transportation and assembly in space. Modular architecture of space structures also enables reconfiguration of large structures such that they can adapt to possible changes in environment, and also allows use of the limited structural resources available in space for completion of a much larger variety of tasks. An increase in size and complexity demands development of materials with a "smart" or active structural modulus and also of effective control algorithms to control the motion of large flexible structures. This challenging task has generated a lot of interest amongst scientists and engineers during the last two decades, however, research into the development of control schemes which can adapt to structural configuration changes has received less attention. This is possibly due to the increased complexity caused by alterations in geometry, which inevitably lead to changes in the dynamic properties of the system. This paper presents results of the application of a decentralized control approach for active control of large flexible structures undergoing significant reconfigurations. The Control Component Synthesis methodology was used to build controlled components and to assemble them into a controlled flexible structure that meets required performance specifications. To illustrate the efficiency of the method, numerical simulations were conducted for 2D and 3D modular truss structures and a multi-link beam system. In each case the performance of the decentralized control system has been evaluated using pole location maps, step and impulse response simulations and frequency response analysis. The performance of the decentralized control system has been measured against the optimal centralised control system for various excitation scenarios. A special case where one of the local component controllers fails was also examined. For better interpretation of the efficiency of the designed controllers, results of the simulations are illustrated using a Virtual Reality computer environment, offering advanced visual effects. Plotnikova@rmit.edu.au # Tsunwah@hotmail.com

Real life testing of a Hybrid PEM Fuel Cell Bus

NASA Astrophysics Data System (ADS)

Folkesson, Anders; Andersson, Christian; Alvfors, Per; Alaküla, Mats; Overgaard, Lars

Fuel cells produce low quantities of local emissions, if any, and are therefore one of the most promising alternatives to internal combustion engines as the main power source in future vehicles. It is likely that urban buses will be among the first commercial applications for fuel cells in vehicles. This is due to the fact that urban buses are highly visible for the public, they contribute significantly to air pollution in urban areas, they have small limitations in weight and volume and fuelling is handled via a centralised infrastructure. Results and experiences from real life measurements of energy flows in a Scania Hybrid PEM Fuel Cell Concept Bus are presented in this paper. The tests consist of measurements during several standard duty cycles. The efficiency of the fuel cell system and of the complete vehicle are presented and discussed. The net efficiency of the fuel cell system was approximately 40% and the fuel consumption of the concept bus is between 42 and 48% lower compared to a standard Scania bus. Energy recovery by regenerative braking saves up 28% energy. Bus subsystems such as the pneumatic system for door opening, suspension and brakes, the hydraulic power steering, the 24 V grid, the water pump and the cooling fans consume approximately 7% of the energy in the fuel input or 17% of the net power output from the fuel cell system. The bus was built by a number of companies in a project partly financed by the European Commission's Joule programme. The comprehensive testing is partly financed by the Swedish programme "Den Gröna Bilen" (The Green Car). A 50 kW el fuel cell system is the power source and a high voltage battery pack works as an energy buffer and power booster. The fuel, compressed hydrogen, is stored in two high-pressure stainless steel vessels mounted on the roof of the bus. The bus has a series hybrid electric driveline with wheel hub motors with a maximum power of 100 kW. Hybrid Fuel Cell Buses have a big potential, but there are still many issues to consider prior to full-scale commercialisation of the technology. These are related to durability, lifetime, costs, vehicle and system optimisation and subsystem design. A very important factor is to implement an automotive design policy in the design and construction of all components, both in the propulsion system as well as in the subsystems.

Expert leadership of eating disorder services in South Australia.

PubMed

Long, Randall; Allison, Stephen

2016-06-01

The objective of this study was to describe the history of South Australian Government eating disorder service from the perspective of changing leadership, health policies and politics. The history reveals a foundation of early expert academic clinical leadership changing into a centralised managerial bureaucracy correlating with a diminution of services. A threat to the survival of the service led to a solution involving reinvigoration of expert clinical and academic leadership. Expert leadership was shown to be an important part of an eating disorder service. © The Royal Australian and New Zealand College of Psychiatrists 2016.

National governance of archetypes in Norway.

PubMed

Ljosland Bakke, Silje

2015-01-01

Norwegian National ICT has implemented a national governance scheme for archetypes. The scheme uses openEHR, and is possibly the first of its kind worldwide. It introduces several new processes and methods for crowd sourcing clinician input. It has spent much of its first year establishing practical processes and recruiting clinicians, and only a few archetypes has been reviewed and approved. Some non-reusable archetypes have emerged while the governance scheme has established itself, which demonstrates the need for a centralised governance. As the mass of clinician involvement reached a critical point at the end of 2014, the rate of archetype review and approval increased.

Framework for a clinical information system.

PubMed

Van De Velde, R; Lansiers, R; Antonissen, G

2002-01-01

The design and implementation of Clinical Information System architecture is presented. This architecture has been developed and implemented based on components following a strong underlying conceptual and technological model. Common Object Request Broker and n-tier technology featuring centralised and departmental clinical information systems as the back-end store for all clinical data are used. Servers located in the "middle" tier apply the clinical (business) model and application rules. The main characteristics are the focus on modelling and reuse of both data and business logic. Scalability as well as adaptability to constantly changing requirements via component driven computing are the main reasons for that approach.

Team leadership: network differences in women's and men's instrumental and expressive relations.

PubMed

Webster, C; Grusky, O; Podus, D; Young, A

1999-01-01

Recent studies have emphasised differences in leadership styles between women and men. Women have an "interactive" leadership style while men are more "directive" and "authoritative." Social network analysis is used to examine differences in eight mental health case management teams, half formally supervised by women and half by men. The techniques used are graphical displays and measures of centrality. Results show male leaders as the most central team member for both instrumental and expressive relations. Female leaders, however, do not adhere to a single leadership style. Team centralisation also differs with gender composition of teams influencing leadership differences.

Vocational Schools in Turkey: An Administrative and Organizational Analysis

NASA Astrophysics Data System (ADS)

Simsek, Hasan; Yildirim, Ali

2000-07-01

The data used in this paper were derived from a larger project which had the aim of critically evaluating the Turkish vocational education system on a number of different levels. This article examines the administrative and organisational practices in a selected group of secondary vocational schools in Turkey from the point of view of school administrators, teachers and industrial managers. The results indicate that the Turkish vocational education system is characterised by a centralised, top-down bureaucracy, which inhibits innovative capacity. The authors argue that a degree of decentralisation is necessary at various levels of the system.

Life-cycle energy impacts for adapting an urban water supply system to droughts.

PubMed

Lam, Ka Leung; Stokes-Draut, Jennifer R; Horvath, Arpad; Lane, Joe L; Kenway, Steven J; Lant, Paul A

2017-12-15

In recent years, cities in some water stressed regions have explored alternative water sources such as seawater desalination and potable water recycling in spite of concerns over increasing energy consumption. In this study, we evaluate the current and future life-cycle energy impacts of four alternative water supply strategies introduced during a decade-long drought in South East Queensland (SEQ), Australia. These strategies were: seawater desalination, indirect potable water recycling, network integration, and rainwater tanks. Our work highlights the energy burden of alternative water supply strategies which added approximately 24% life-cycle energy use to the existing supply system (with surface water sources) in SEQ even for a current post-drought low utilisation status. Over half of this additional life-cycle energy use was from the centralised alternative supply strategies. Rainwater tanks contributed an estimated 3% to regional water supply, but added over 10% life-cycle energy use to the existing system. In the future scenario analysis, we compare the life-cycle energy use between "Normal", "Dry", "High water demand" and "Design capacity" scenarios. In the "Normal" scenario, a long-term low utilisation of the desalination system and the water recycling system has greatly reduced the energy burden of these centralised strategies to only 13%. In contrast, higher utilisation in the unlikely "Dry" and "Design capacity" scenarios add 86% and 140% to life-cycle energy use of the existing system respectively. In the "High water demand" scenario, a 20% increase in per capita water use over 20 years "consumes" more energy than is used by the four alternative strategies in the "Normal" scenario. This research provides insight for developing more realistic long-term scenarios to evaluate and compare life-cycle energy impacts of drought-adaptation infrastructure and regional decentralised water sources. Scenario building for life-cycle assessments of water supply systems should consider i) climate variability and, therefore, infrastructure utilisation rate, ii) potential under-utilisation for both installed centralised and decentralised sources, and iii) the potential energy penalty for operating infrastructure well below its design capacity (e.g., the operational energy intensity of the desalination system is three times higher at low utilisation rates). This study illustrates that evaluating the life-cycle energy use and intensity of these type of supply sources without considering their realistic long-term operating scenario(s) can potentially distort and overemphasise their energy implications. To other water stressed regions, this work shows that managing long-term water demand is also important, in addition to acknowledging the energy-intensive nature of some alternative water sources. Copyright © 2017 Elsevier Ltd. All rights reserved.

Australian health system restructuring - what problem is being solved?

PubMed

Dwyer, Judith M

2004-11-19

BACKGROUND: In recent years, Australian state and territory governments have reviewed and restructured the health systems they lead and regulate. This paper examines the outcomes of the most recent official published reviews of systems and structures; identifies the common themes; and addresses two questions: what problems are being addressed? And how would we know if the changes were successful? RESULTS: In all the broad, systemic reviews, the main health system problems identified were money, hospital utilisation and a weak primary health care system. The solutions are various, but there is a common trend towards centralisation of governance, often at state health authority level, and stronger accountability measures. Other common themes are hospital substitution (services to avoid the need for admission); calls for cooperation across the Commonwealth:state divide, or for its abolition; and the expected range of current efficiency and effectiveness measures (eg amalgamate pathology and support services) and ideas in good currency (eg call centres). The top-down nature of the public review process is noted, along with the political nature of the immediate catalysts for calling on a review. CONCLUSION: The long-standing tension between the pull to centralisation of authority and the need for innovation in care models is heightened by recent changes, which may be counterproductive in an era dominated by the burden of chronic disease. I argue that the current reforms will not succeed in achieving the stated goals unless they make a difference for people with chronic illness. And if this is correct, the most useful focus for evaluation of the success of the reforms may be their impact on the system's ability to develop and deliver better models of care for this growing group of patients.

Towards a Global Service Registry for the World-Wide LHC Computing Grid

NASA Astrophysics Data System (ADS)

Field, Laurence; Alandes Pradillo, Maria; Di Girolamo, Alessandro

2014-06-01

The World-Wide LHC Computing Grid encompasses a set of heterogeneous information systems; from central portals such as the Open Science Grid's Information Management System and the Grid Operations Centre Database, to the WLCG information system, where the information sources are the Grid services themselves. Providing a consistent view of the information, which involves synchronising all these informations systems, is a challenging activity that has lead the LHC virtual organisations to create their own configuration databases. This experience, whereby each virtual organisation's configuration database interfaces with multiple information systems, has resulted in the duplication of effort, especially relating to the use of manual checks for the handling of inconsistencies. The Global Service Registry aims to address this issue by providing a centralised service that aggregates information from multiple information systems. It shows both information on registered resources (i.e. what should be there) and available resources (i.e. what is there). The main purpose is to simplify the synchronisation of the virtual organisation's own configuration databases, which are used for job submission and data management, through the provision of a single interface for obtaining all the information. By centralising the information, automated consistency and validation checks can be performed to improve the overall quality of information provided. Although internally the GLUE 2.0 information model is used for the purpose of integration, the Global Service Registry in not dependent on any particular information model for ingestion or dissemination. The intention is to allow the virtual organisation's configuration databases to be decoupled from the underlying information systems in a transparent way and hence simplify any possible future migration due to the evolution of those systems. This paper presents the Global Service Registry architecture, its advantages compared to the current situation and how it can support the evolution of information systems.

The volume-mortality relation for radical cystectomy in England: retrospective analysis of hospital episode statistics

PubMed Central

Bottle, Alex; Darzi, Ara W; Athanasiou, Thanos; Vale, Justin A

2010-01-01

Objectives To investigate the relation between volume and mortality after adjustment for case mix for radical cystectomy in the English healthcare setting using improved statistical methodology, taking into account the institutional and surgeon volume effects and institutional structural and process of care factors. Design Retrospective analysis of hospital episode statistics using multilevel modelling. Setting English hospitals carrying out radical cystectomy in the seven financial years 2000/1 to 2006/7. Participants Patients with a primary diagnosis of cancer undergoing an inpatient elective cystectomy. Main outcome measure Mortality within 30 days of cystectomy. Results Compared with low volume institutions, medium volume ones had a significantly higher odds of in-hospital and total mortality: odds ratio 1.72 (95% confidence interval 1.00 to 2.98, P=0.05) and 1.82 (1.08 to 3.06, P=0.02). This was only seen in the final model, which included adjustment for structural and processes of care factors. The surgeon volume-mortality relation showed weak evidence of reduced odds of in-hospital mortality (by 35%) for the high volume surgeons, although this did not reach statistical significance at the 5% level. Conclusions The relation between case volume and mortality after radical cystectomy for bladder cancer became evident only after adjustment for structural and process of care factors, including staffing levels of nurses and junior doctors, in addition to case mix. At least for this relatively uncommon procedure, adjusting for these confounders when examining the volume-outcome relation is critical before considering centralisation of care to a few specialist institutions. Outcomes other than mortality, such as functional morbidity and disease recurrence may ultimately influence towards centralising care. PMID:20305302

How do United Kingdom (UK) medical schools identify and support undergraduate medical students who ‘fail’ communication assessments? A national survey

PubMed Central

2013-01-01

Background The doctor’s ability to communicate effectively (with patients, relatives, advocates and healthcare colleagues) relates directly to health outcomes, and so is core to clinical practice. The remediation of medical students’ clinical communication ability is rarely addressed in medical education literature. There is nothing in the current literature reporting a contemporary national picture of how communication difficulties are managed, and the level of consequence (progression implications) for students of performing poorly. This survey aimed to consolidate practices for identifying and processes for managing students who ‘fail’ communication assessments across all UK medical schools. Methods Data were collected via an email survey to all leads for clinical communication in all UK Medical Schools for the UK Council for Clinical Communication in Undergraduate Medical Education. Results All but two participating Schools reported some means of support and/or remediation in communication. There was diversity of approach, and variance in the level of systemisation adopted. Variables such as individuality of curricula, resourcing issues, student cohort size and methodological preferences were implicated as explaining diversity. Support is relatively ad hoc, and often in the hands of a particular dedicated individual or team with an interest in communication delivery with few Schools reporting robust, centralised, school level processes. Conclusions This survey has demonstrated that few Medical Schools have no identifiable system of managing their students’ clinical communication difficulties. However, some Schools reported ad hoc approaches and only a small number had a centralised programme. There is scope for discussion and benchmarking of best practice across all Schools with allocation of appropriate resources to support this. PMID:23834990

European Union centralised procedure for marketing authorisation of oncology drugs: an in-depth review of its efficiency.

PubMed

Netzer, Tilo

2006-03-01

In the European Union (EU) 20 anticancer agents have been successfully authorised via the Centralised Procedure since its implementation in 1995. Public information on these 20 agents has been reviewed in order to evaluate the effectiveness of the available regulatory mechanisms to facilitate the marketing authorisation of such drugs in the EU. These mechanisms include orphan drug legislation, exceptional circumstances provision and the accelerated evaluation procedure. Based on the fact that the EU orphan drug legislation was not implemented before the year 2000 no conclusions on its effectiveness to facilitate oncology drug development can be drawn today. Much more data are available on the effects of the exceptional circumstances provision, which was used in 6 out of 10 cases over the past four years. An analysis of the clinical data packages indicates that this provision allows authorisation of innovative oncology drugs based on smaller clinical data sets than required for full approval. The accelerated evaluation procedure was used in only one case and significantly reduced the scientific review time at the EU agencies. However, this mechanism does not influence the administrative time at the authorities, which accounted for almost one-third of the overall duration of the EU marketing authorisation procedures for oncology drugs. Revision of the EU drug legislation brings about some changes to the above-described provisions, with the potential for an improvement in the current situation. Thus, its implementation offers the chance to reduce the time that innovative oncology agents take to reach the market, although -- based on experience with the current procedures -- more effort is likely to be required to achieve this goal.

Centralised, decentralised or hybrid sanitation systems? Economic evaluation under urban development uncertainty and phased expansion.

PubMed

Roefs, Ivar; Meulman, Brendo; Vreeburg, Jan H G; Spiller, Marc

2017-02-01

Sanitation systems are built to be robust, that is, they are dimensioned to cope with population growth and other variability that occurs throughout their lifetime. It was recently shown that building sanitation systems in phases is more cost effective than one robust design. This phasing can take place by building small autonomous decentralised units that operate closer to the actual demand. Research has shown that variability and uncertainty in urban development does affect the cost effectiveness of this approach. Previous studies do not, however, consider the entire sanitation system from collection to treatment. The aim of this study is to assess the economic performance of three sanitation systems with different scales and systems characteristics under a variety of urban development pathways. Three systems are studied: (I) a centralised conventional activated sludge treatment, (II) a community on site source separation grey water and black water treatment and (III) a hybrid with grey water treatment at neighbourhood scale and black water treatment off site. A modelling approach is taken that combines a simulation of greenfield urban growth, a model of the wastewater collection and treatment infrastructure design properties and a model that translates design parameters into discounted asset lifetime costs. Monte Carlo simulations are used to evaluate the economic performance under uncertain development trends. Results show that the conventional system outperforms both of the other systems when total discounted lifetime costs are assessed, because it benefits from economies of scale. However, when population growth is lower than expected, the source-separated system is more cost effective, because of reduced idle capacity. The hybrid system is not competitive under any circumstance due to the costly double piping and treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Progressing quality control in environmental impact assessment beyond legislative compliance: An evaluation of the IEMA EIA Quality Mark certification scheme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bond, Alan, E-mail: alan.bond@uea.ac.uk; Research Unit for Environmental Sciences and Management, North-West University; Fischer, Thomas B, E-mail: fischer@liverpool.ac.uk

The effectiveness of Environmental Impact Assessment (EIA) systems is contingent on a number of control mechanisms: procedural; judicial; evaluative; public and government agency; professional; and development aid agency. If we assume that procedural and judicial controls are guaranteed in developed EIA systems, then progressing effectiveness towards an acceptable level depends on improving the performance of other control mechanisms over time. These other control mechanisms are either absent, or are typically centrally controlled, requiring public finances; this we argue is an unpopular model in times of greater Government austerity. Here we evaluate a market-based mechanism for improving the performance of evaluativemore » and professional control mechanisms, the UK Institute of Environmental Management and Assessments' EIA Quality Mark. We do this by defining dimensions of effectiveness for the purposes of our evaluation, and by identifying international examples of the approaches taken to delivering the other control measures to validate the approach taken in the EIA Quality Mark. We then evaluate the EIA Quality Mark, when used in combination with legal procedures and an active judiciary, against the effectiveness dimensions and use time-series analysis of registrant data to examine its ability to progress practice. We conclude that the EIA Quality Mark has merit as a model for a market-based mechanism, and may prove a more financially palatable approach for delivering effective EIA in mature systems in countries that lack centralised agency oversight. It may, therefore, be of particular interest to some Member States of the European Union for ensuring forthcoming certification requirements stemming from recent amendments to the EIA Directive. - Highlights: • Quality control mechanisms in EIA are identified. • Effectiveness of EIA is conceptualised for evaluation purposes. • The UK IEMA EIA Quality Mark is introduced as a market-based mechanism. • The EIA Quality Mark is found to progress quality in many, but not all, areas.« less

A Privacy-Preserving Platform for User-Centric Quantitative Benchmarking

NASA Astrophysics Data System (ADS)

Herrmann, Dominik; Scheuer, Florian; Feustel, Philipp; Nowey, Thomas; Federrath, Hannes

We propose a centralised platform for quantitative benchmarking of key performance indicators (KPI) among mutually distrustful organisations. Our platform offers users the opportunity to request an ad-hoc benchmarking for a specific KPI within a peer group of their choice. Architecture and protocol are designed to provide anonymity to its users and to hide the sensitive KPI values from other clients and the central server. To this end, we integrate user-centric peer group formation, exchangeable secure multi-party computation protocols, short-lived ephemeral key pairs as pseudonyms, and attribute certificates. We show by empirical evaluation of a prototype that the performance is acceptable for reasonably sized peer groups.

[Drugs for 'neglected diseases': a bitter pill].

PubMed

Veeken, H; Pécoul, B

2000-06-24

Neglected diseases are diseases restricted to poor areas; diseases for which there exist no commercial incentives to invest in the development of new treatments. Patients suffering from these diseases often have no access to essential drugs; this can be a matter of life and death. Lack of research and patent protection play a crucial role. Both are cost driven; greed in the West curtails the availability of life-saving drugs for all. Treatment options for trypanosomiasis and visceral leishmaniasis are lacking. It is recommended that drugs for the treatment of 'neglected diseases' be developed via a centralised, public approach that is not based on profit, rather than leaving it to free enterprise.

The National Health Service (NHS) at 70: Bevan's double-edged legacy.

PubMed

Klein, Rudolf

2018-01-08

The paper analyses the achievements and problems stemming from Nye Bevan's model of a tax funded national health care system, on the assumption that only so could equity be achieved. The evidence shows that indeed the National Health Service (NHS) scores highly on equity, so vindicating Bevan's vision. The price paid is that fiscal crises are the norm for the NHS, with ever more centralisation, intensive regulation and performance management. Successive reorganisations represent attempts to square the circle - to combine the strengths of Bevan's model and those of a less hierarchic system - but have so far failed to deliver and can be expected to continue.

[The insigne and suntuoso Royal Hospital of Granada (II). Officers and servants in a general hospital (1526-1535)].

PubMed

Valenuela Candelario, José

2004-01-01

After the merging of the two hospitals founded by the Catholic Kings, the Royal Council of Granada extended the centralisation of medical care by incorporating the municipal House of the Insane in the process. The new Royal Hospital, re-founded as a general hospital, offered alms (bread), gave medical and spiritual care to patients with pox and looked after the insane. This was done using officers from the old Alhambra hospital, who found an opportune salvation in the new buildings. Their administrators directed an institution that was highly committed to the dynamics of patronage and client subordination.

Land revenues, schools and literacy: a historical examination of public and private funding of education.

PubMed

Chaudhary, Latika

2010-01-01

Despite the centralised nature of the fiscal system in colonial India, public education expenditures varied dramatically across regions with the western and southern provinces spending three to four times as much as the eastern provinces. A significant portion of the inter-regional difference was due to historical differences in land taxes, an important source of provincial revenues in the nineteenth and early twentieth century. The large differences in public spending, however, did not produce comparable differences in enrollment rates or literacy in the colonial period. Nonetheless, public investments influenced the direction of school development and perhaps the long run trajectory of rural literacy.

Sustainable Electricity and Water for Europe, Middle East and North Africa

NASA Astrophysics Data System (ADS)

Müller-Steinhagen, H.; Trieb, F.

2009-04-01

Sufficient supply of energy and water are among the key requirements for a sustainable development of nations. Both depend strongly on energy carriers such as oil, gas, coal and uranium which have limited availability and a negative impact on the environment during their use. Within the framework of a series of detailed studies, conventional and renewable energy sources available for electricity production and desalination in Europe, North Africa and the Middle East (EU-MENA) have been analysed. Scenarios have been developed for a sustainable electricity supply based on increased plant and user efficiency, and an accelerated introduction of renewable energy sources. Even if all potential exclusion criteria are applied and only those technologies are considered which will become economically competitive within the next decades, a potential has been identified which exceeds the present electricity demand by orders of magnitude. Solar energy is, in this context, the by far largest resource which will most economically be exploited in centralised solar thermal power plants. In combination with heat storage, these power plants can provide bulk and peak electricity, and can be combined with thermal or reverse osmosis desalination plants. At present, solar thermal power plants with a total capacity exceeding 10 GW are in operation or under construction in Abu Dhabi, Algeria, Egypt, Iran, Israel, Italy, Morocco, Spain and the USA. Ultimately, the increasing electricity demand of EU-MENA can only be secured in conjunction with the required climate and resource protection targets, if all renewable energy sources are exploited where appropriate, and conversion and user efficiency are increased. To utilise the enormous energy resources of the Mediterranean countries, high voltage direct current power lines will have to be built, linking the most abundant and economic resources with the load centres in the North. With electricity losses below 10% over a distance of 3000 km, HVDC lines may provide up to 15% of the total European electricity demand by 2050. For the MENA region, this scenario will provide most promising opportunities: in addition to the export of electricity replacing revenues from dwindling oil and gas resources, solar thermal power plants will provide a major share of their own electricity demands at competitive costs and will provide fresh water by seawater desalination, the latter becoming an urgent requirement over the next decades. This presentation outlines the assumptions and results of the studies which have been performed by an international consortium for 50 EU-MENA countries, as well as the technological and economic implications of the suggested scenario.

Physician staffed helicopter emergency medical service dispatch via centralised control or directly by crew – case identification rates and effect on the Sydney paediatric trauma system

PubMed Central

2012-01-01

Background Severe paediatric trauma patients benefit from direct transport to dedicated Paediatric Trauma Centres (PTC). Parallel case identification systems utilising paramedics from a centralised dispatch centre versus the crew of a physician staffed Helicopter Emergency Medical Service (HEMS) allowed comparison of the two systems for case identification rates and subsequent timeliness of direct transfer to a PTC. Methods Paediatric trauma patients over a two year period from the Sydney region with an Injury Severity Score (ISS) > 15 were retrospectively identified from a state wide trauma registry. Overall paediatric trauma system performance was assessed by comparisons of the availability of the physician staffed HEMS for patient characteristics, transport mode (direct versus indirect) and the times required for the patient to arrive at the paediatric trauma centre. The proportion of patients transported directly to a PTC was compared between the times that the HEMS service was available versus the time that it was unavailable to determine if the HEMS system altered the rate of direct transport to a PTC. Analysis of variance was used to compare the identifying systems for various patient characteristics when the HEMS was available. Results Ninety nine cases met the inclusion criteria, 44 when the HEMS system was operational. Patients identified for physician response by the HEMS system were significantly different to those that were not identified with higher median ISS (25 vs 18, p = 0.011), and shorter times to PTC (67 vs 261mins, p = 0.015) and length of intensive care unit stays (2 vs 0 days, p = 0.045). Of the 44 cases, 21 were not identified, 3 were identified by the paramedic system and 20 were identified by the HEMS system, (P < 0.001). Direct transport to a PTC was more likely to occur when the HEMS dispatch system was available (RR 1.81, 95% CI 1.20-2.73). The median time (minutes) to arrival at the PTC was shorter when HEMS available (HEMS available 92, IQR 50-261 versus HEMS unavailable 296, IQR 84-583, P < 0.01). Conclusions Physician staffed HEMS crew dispatch is significantly more likely to identify cases of severe paediatric trauma and is associated with a greater proportion of transports directly to a PTC and with faster times to arrival. PMID:23244708

Patient-centred advice is effective in improving adherence to medicines.

PubMed

Clifford, Sarah; Barber, Nick; Elliott, Rachel; Hartley, Elaine; Horne, Rob

2006-06-01

To assess the effects of pharmacists giving advice to meet patients' needs after starting a new medicine for a chronic condition. A prospective health technology assessment including a randomised controlled trial of a pharmacist-delivered intervention to improve adherence using a centralised telephone service to patients at home in England. Patients were eligible for recruitment if they were receiving the first prescription for a newly prescribed medication for a chronic condition and were 75 or older or suffering from stroke, cardiovascular disease, asthma, diabetes or rheumatoid arthritis. Incidence of non-adherence, problems with the new medicine, beliefs about the new medicine, safety and usefulness of the interventions. Five hundred patients consented and were randomised. At 4-week follow-up, non-adherence was significantly lower in the intervention group compared to control (9% vs. 16%, P = 0.032). The number of patients reporting medicine-related problems was significantly lower in the intervention group compared to the control (23% vs. 34%, P = 0.021). Intervention group patients also had more positive beliefs about their new medicine, as shown by their higher score on the "necessity-concerns differential" (5.0 vs. 3.5, P = 0.007). The phone calls took a median of 12 min each. Most advice was judged by experts to be safe and helpful, and patients found it useful. Overall, these findings show benefits from pharmacists meeting patients' needs for information and advice on medicines, soon after starting treatment. While a substantially larger trial would be needed to confirm that the effect is real and sustained, these initial findings suggest the service may be safe and useful to patients.

Extended spider cognition.

PubMed

Japyassú, Hilton F; Laland, Kevin N

2017-05-01

There is a tension between the conception of cognition as a central nervous system (CNS) process and a view of cognition as extending towards the body or the contiguous environment. The centralised conception requires large or complex nervous systems to cope with complex environments. Conversely, the extended conception involves the outsourcing of information processing to the body or environment, thus making fewer demands on the processing power of the CNS. The evolution of extended cognition should be particularly favoured among small, generalist predators such as spiders, and here, we review the literature to evaluate the fit of empirical data with these contrasting models of cognition. Spiders do not seem to be cognitively limited, displaying a large diversity of learning processes, from habituation to contextual learning, including a sense of numerosity. To tease apart the central from the extended cognition, we apply the mutual manipulability criterion, testing the existence of reciprocal causal links between the putative elements of the system. We conclude that the web threads and configurations are integral parts of the cognitive systems. The extension of cognition to the web helps to explain some puzzling features of spider behaviour and seems to promote evolvability within the group, enhancing innovation through cognitive connectivity to variable habitat features. Graded changes in relative brain size could also be explained by outsourcing information processing to environmental features. More generally, niche-constructed structures emerge as prime candidates for extending animal cognition, generating the selective pressures that help to shape the evolving cognitive system.

A life cycle approach to the management of household food waste - A Swedish full-scale case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstad, A., E-mail: anna.bernstad@chemeng.lth.se; Cour Jansen, J. la

2011-08-15

Research Highlights: > The comparison of three different methods for management of household food waste show that anaerobic digestion provides greater environmental benefits in relation to global warming potential, acidification and ozone depilation compared to incineration and composting of food waste. Use of produced biogas as car fuel provides larger environmental benefits compared to a use of biogas for heat and power production. > The use of produced digestate from the anaerobic digestion as substitution for chemical fertilizer on farmland provides avoidance of environmental burdens in the same ratio as the substitution of fossil fuels with produced biogas. > Sensitivitymore » analyses show that results are highly sensitive to assumptions regarding the environmental burdens connected to heat and energy supposedly substituted by the waste treatment. - Abstract: Environmental impacts from incineration, decentralised composting and centralised anaerobic digestion of solid organic household waste are compared using the EASEWASTE LCA-tool. The comparison is based on a full scale case study in southern Sweden and used input-data related to aspects such as source-separation behaviour, transport distances, etc. are site-specific. Results show that biological treatment methods - both anaerobic and aerobic, result in net avoidance of GHG-emissions, but give a larger contribution both to nutrient enrichment and acidification when compared to incineration. Results are to a high degree dependent on energy substitution and emissions during biological processes. It was seen that if it is assumed that produced biogas substitute electricity based on Danish coal power, this is preferable before use of biogas as car fuel. Use of biogas for Danish electricity substitution was also determined to be more beneficial compared to incineration of organic household waste. This is a result mainly of the use of plastic bags in the incineration alternative (compared to paper bags in the anaerobic) and the use of biofertiliser (digestate) from anaerobic treatment as substitution of chemical fertilisers used in an incineration alternative. Net impact related to GWP from the management chain varies from a contribution of 2.6 kg CO{sub 2}-eq/household and year if incineration is utilised, to an avoidance of 5.6 kg CO{sub 2}-eq/household and year if choosing anaerobic digestion and using produced biogas as car fuel. Impacts are often dependent on processes allocated far from the control of local decision-makers, indicating the importance of a holistic approach and extended collaboration between agents in the waste management chain.« less

Options for refuelling hydrogen fuel cell vehicles in Italy

NASA Astrophysics Data System (ADS)

Mercuri, R.; Bauen, A.; Hart, D.

Hydrogen fuel cell vehicle (H 2 FCV) trials are taking place in a number of cities around the world. In Italy, Milan and Turin are the first to have demonstration projects involving hydrogen-fuelled vehicles, in part to satisfy increasing consumer demand for improved environmental performance. The Italian transport plan specifically highlights the potential for FCVs to enter into the marketplace from around 2005. A scenario for FCV penetration into Italy, developed using projected costs for FCV and hydrogen fuel, suggests that by 2015, 2 million Italian cars could be powered by fuel cells. By 2030, 60% of the parc could be FCVs. To develop an infrastructure to supply these vehicles, a variety of options is considered. Large-scale steam reforming, on-site reforming and electrolysis options are analysed, with hydrogen delivered both in liquid and gaseous form. Assuming mature technologies, with over 10,000 units produced, on-site steam reforming provides the most economic hydrogen supply to the consumer, at US 2.6/kg. However, in the early stages of the infrastructure development there is a clear opportunity for on-site electrolysis and for production of hydrogen at centralised facilities, with delivery in the form of liquid hydrogen. This enables additional flexibility, as the hydrogen may also be used for fuel refining or for local power generation. In the current Italian context, energy companies could have a significant role to play in developing a hydrogen infrastructure. The use of hydrogen FCVs can substantially reduce emissions of regulated pollutants and greenhouse gases. Using externality costs for regulated pollutants, it is estimated that the use of hydrogen fuel cell buses in place of 5% of diesel buses in Milan could avoid US 2 million per year in health costs. The addition of even very low externality costs to fuel prices makes the use of untaxed hydrogen in buses and cars, which is slightly more expensive for the motorist than untaxed gasoline or diesel, competitive on a social cost basis.

Power games: The political use of solar technology in northern Thailand

NASA Astrophysics Data System (ADS)

Green, Donna Lisa

This dissertation politicises and historically situates the transfer of an environmental technology to a less developed country, a transfer that has occurred under the rubric of sustainable development. The case study explores the social and political context of two solar battery charging station programmes selected to provide electrification in rural Northern Thailand beginning in the 1980s. It places these rural electrification programmes in the context of previous rural electrification policies in northern Thailand in the 1960s and 1970s which were driven by an explicitly state-serving agenda: an agenda that aimed to expand the centralised state's ability to pacify and control remote areas of the country. However, it is clear that the technology and implementation strategies selected for the new electrification programmes could not fulfil their community-serving objectives; furthermore, these systems could not meet the actual energy needs of the programmes' intended beneficiaries. I argue that we need to consider whether the objectives that motivated previous rural electrification programmes may be continuing to play a role in the promotion of these new rural electrification programmes, a motivation that would contradict the philosophy behind the choice of the solar battery charging stations. Specifically, I show how the new rural electrification strategy has been de-politicised through its framing within the sustainable development discourses. This thesis highlights how the rush to promote environmental technologies through the rubric of sustainable development may limit a proper consideration of the social and political dynamics that motivated these decisions, resulting in the uncritical justification of technology selection. Scholars have critiqued the social ramifications of, and the political motivations behind, earlier technocentric rural development strategies, showing how they can exacerbate social inequalities. I argue that in this situation, the alleged environmental benefits of using an environmental technology in a sustainable development programme may have served to shelter it from similar critique. The assessment reveals and emphasises the need to query the validity of the objectives motivating other technocentric rural development programmes that transfer environmental technologies as part of the practice of sustainable development.

Toward sensor modular autonomy for persistent land intelligence surveillance and reconnaissance (ISR)

NASA Astrophysics Data System (ADS)

Thomas, Paul A.; Marshall, Gillian; Faulkner, David; Kent, Philip; Page, Scott; Islip, Simon; Oldfield, James; Breckon, Toby P.; Kundegorski, Mikolaj E.; Clark, David J.; Styles, Tim

2016-05-01

Currently, most land Intelligence, Surveillance and Reconnaissance (ISR) assets (e.g. EO/IR cameras) are simply data collectors. Understanding, decision making and sensor control are performed by the human operators, involving high cognitive load. Any automation in the system has traditionally involved bespoke design of centralised systems that are highly specific for the assets/targets/environment under consideration, resulting in complex, non-flexible systems that exhibit poor interoperability. We address a concept of Autonomous Sensor Modules (ASMs) for land ISR, where these modules have the ability to make low-level decisions on their own in order to fulfil a higher-level objective, and plug in, with the minimum of preconfiguration, to a High Level Decision Making Module (HLDMM) through a middleware integration layer. The dual requisites of autonomy and interoperability create challenges around information fusion and asset management in an autonomous hierarchical system, which are addressed in this work. This paper presents the results of a demonstration system, known as Sensing for Asset Protection with Integrated Electronic Networked Technology (SAPIENT), which was shown in realistic base protection scenarios with live sensors and targets. The SAPIENT system performed sensor cueing, intelligent fusion, sensor tasking, target hand-off and compensation for compromised sensors, without human control, and enabled rapid integration of ISR assets at the time of system deployment, rather than at design-time. Potential benefits include rapid interoperability for coalition operations, situation understanding with low operator cognitive burden and autonomous sensor management in heterogenous sensor systems.

Searching for the hospital yardstick: a case study of private hospital productivity bargaining.

PubMed

Timo, N

1997-01-01

The decentralisation of Australia's centralised wage fixation system has been seen as providing opportunities for employers and trade unions to tailor working arrangements to suit the needs of the workplace and to provide better paid long-term jobs. This paper details the productivity bargaining between the Private Hospitals' Association of Queensland and The Australian Workers' Union in 1995-97 in Queensland that led to the introduction of a number of productivity-based enterprise agreements. The case study shows that productivity bargaining in the private hospitals studied remains focused on 'bottom line' issues where cashable savings can readily be generated. The paper concludes with an examination of the lessons drawn from the productivity bargaining process.

New working paradigms in research laboratories.

PubMed

Keighley, Wilma; Sewing, Andreas

2009-07-01

Work in research laboratories, especially within centralised functions in larger organisations, is changing fast. With easier access to external providers and Contract Research Organisations, and a focus on budgets and benchmarking, scientific expertise has to be complemented with operational excellence. New concepts, globally shared projects and restricted resources highlight the constraints of traditional operating models working from Monday to Friday and nine to five. Whilst many of our scientists welcome this new challenge, organisations have to enable and foster a more business-like mindset. Organisational structures, remuneration, as well as systems in finance need to be adapted to build operations that are best-in-class rather than merely minimising negative impacts of current organisational structures.

Do regions of ALICE matter? Social relationships and data exchanges in the Grid

NASA Astrophysics Data System (ADS)

Widmer, E. D.; Carminati, F.; Grigoras, C.; Viry, G.; Galli Carminati, G.

2012-06-01

Following a previous publication [1], this study aims at investigating the impact of regional affiliations of centres on the organisation of collaboration within the Distributed Computing ALICE infrastructure, based on social networks methods. A self-administered questionnaire was sent to all centre managers about support, email interactions and wished collaborations in the infrastructure. Several additional measures, stemming from technical observations were produced, such as bandwidth, data transfers and Internet Round Trip Time (RTT) were also included. Information for 50 centres were considered (60% response rate). Empirical analysis shows that despite the centralisation on CERN, the network is highly organised by regions. The results are discussed in the light of policy and efficiency issues.

Do regions matter in ALICE?. Social relationships and data exchanges in the Grid

NASA Astrophysics Data System (ADS)

Widmer, E. D.; Viry, G.; Carminati, F.; Galli-Carminati, G.

2012-02-01

This study aims at investigating the impact of regional affiliations of centres on the organisation of collaborations within the Distributed Computing ALICE infrastructure, based on social networks methods. A self-administered questionnaire was sent to all centre managers about support, email interactions and wished collaborations in the infrastructure. Several additional measures, stemming from technical observations were collected, such as bandwidth, data transfers and Internet Round Trip Time (RTT) were also included. Information for 50 centres were considered (about 70% response rate). Empirical analysis shows that despite the centralisation on CERN, the network is highly organised by regions. The results are discussed in the light of policy and efficiency issues.

A Service Architecture Solution for Mobile Enterprise Resources: A Case Study in the Banking Industry

NASA Astrophysics Data System (ADS)

Garcia-Gonzalez, Juan P.; Gacitua-Decar, Geronica; Pahl, Claus

Providing mobility to participants of business processes is an increasing trend in the banking sector. Independence of a physical place to interact with clients, while been able to use the information managed in the banking applications is one, of the benefits of mobile business processes. Challenges arising from this approach include to deal with a scenario of occasionally connected communication; security issues regarding the exposition of internal information on devices-that could be lost-; and restrictions on the capacity of mobile devices. This paper presents our experience in implementing a service-based architecture solution to extend centralised resources from a financial institution to a mobile platform.

Obstetrics in a small maternity hospital.

PubMed

Elliott, C E

1992-05-01

This paper presents the case for continuing to practise safe obstetrics in a small suburban hospital. Boothville Maternity Hospital, Brisbane, is a Salvation Army hospital of 20 beds. Seven thousand births during the years 1975 to 1989 are reported. Perinatal mortality rate was 4.9/1000 total births, forceps rate 7.1%, caesarean rate 9.3% and transfer rate to larger centres 1.6% for babies and 1.2% for mothers. Personalised family-centred care in congenial surroundings serves to maximise the factors that favour uncomplicated delivery. Large centralised and small peripheral hospitals should be seen not as competitive but as complementary. Boothville provides mutually satisfying co-operation for care-givers and care-receivers.

[Law courts and clinical documentation].

PubMed

Jiménez Carnicero, M P; Magallón, A I; Gordillo, A

2006-01-01

Background. Until 2004, requests for clinical documentation proceeding from the Judicial Administration on Specialist Care of Pamplona were received in six different centres and were processed independently, with different procedures, and documents were even sent in duplicate, with the resulting work load. This article describes the procedure for processing requests for documentation proceeding from the Law Courts and analyses the requests received. Methods. A circuit was set up to channel the judicial requests that arrived at the Specialist Health Care Centres of Pamplona and at the Juridical Regime Service of the Health System of Navarra-Osasunbidea, and a Higher Technician in Health Documentation was contracted to centralise these requests. A proceedings protocol was established to unify criteria and speed up the process, and a database was designed to register the proceedings. Results. In the course of 2004, 210 requests for documentation by legal requirement were received. Of these, 24 were claims of patrimonial responsibility and 13 were requested by lawyers with the patient's authorisation. The most frequent jurisdictional order was penal (43.33%). Ninety-three point one five percent (93.15%) of the requests proceeded from law courts in the autonomous community of Navarra. The centre that received the greatest number of requests was the "Príncipe de Viana" Consultation Centre (33.73%).The most frequently requested documentation was a copy of reports (109) and a copy of the complete clinical record (39). On two occasions the original clinical record was required. The average time of response was 6.6 days. Conclusions. The centralisation of administration has brought greater agility to the process and homogeneity in the criteria of processing. Less time is involved in preparing and dispatching the documentation, the dispatch of duplicate documents is avoided, the work load has been reduced and the dispersal of documentation is avoided, a situation that guarantees greater privacy for the patient.

Randomised controlled study in the primary healthcare sector to investigate the effectiveness and safety of auriculotherapy for the treatment of uncomplicated chronic rachialgia: a study protocol.

PubMed

Vas, Jorge; Aguilar, Inmaculada; Campos, M Angeles; Méndez, Camila; Perea-Milla, Emilio; Modesto, Manuela; Caro, Paloma; Martos, Francisco; García-Ruiz, Antonio J

2008-07-06

Uncomplicated chronic rachialgia is a highly prevalent complaint, and one for which therapeutic results are contradictory. The aim of the present study is to evaluate the effectiveness and safety of treatment with auriculopressure, in the primary healthcare sector, carried out by trained healthcare professionals via a 30-hour course. The design consists of a multi-centre randomized controlled trial, with placebo, with two parallel groups, and including an economic evaluation. Patients with chronic uncomplicated rachialgia, whose GP is considering referral for auriculopressure sensory stimulation, are eligible for inclusion. Sampling will be by consecutive selection, and randomised allocation to one of the two study arms will be determined using a centralised method, following a 1:1 plan (true auriculopressure; placebo auriculopressure). The implants (true and placebo) will be replaced once weekly, and the treatment will have a duration of 8 weeks. The primary outcome measure will be the change in pain intensity, measured on a visual analogue scale (VAS) of 100 mm, at 9 weeks after beginning the treatment. A follow up study will be performed at 6 months after beginning treatment. An assessment will also be made of the changes measured in the Spanish version of the McGill Pain Questionnaire, of the changes in the Lattinen test, and of the changes in quality of life (SF-12). Also planned is an analysis of cost-effectiveness and also, if necessary, a cost-benefit analysis. This study will contribute to developing evidence on the use of auriculotherapy using Semen vaccariae [wang bu liu xing] for the treatment of uncomplicated chronic rachialgia. Current Controlled Trials ISRCTN01897462.

Randomised controlled study in the primary healthcare sector to investigate the effectiveness and safety of auriculotherapy for the treatment of uncomplicated chronic rachialgia: a study protocol

PubMed Central

Vas, Jorge; Aguilar, Inmaculada; Campos, M Ángeles; Méndez, Camila; Perea-Milla, Emilio; Modesto, Manuela; Caro, Paloma; Martos, Francisco; García-Ruiz, Antonio J

2008-01-01

Background Uncomplicated chronic rachialgia is a highly prevalent complaint, and one for which therapeutic results are contradictory. The aim of the present study is to evaluate the effectiveness and safety of treatment with auriculopressure, in the primary healthcare sector, carried out by trained healthcare professionals via a 30-hour course. Methods/Design The design consists of a multi-centre randomized controlled trial, with placebo, with two parallel groups, and including an economic evaluation. Patients with chronic uncomplicated rachialgia, whose GP is considering referral for auriculopressure sensory stimulation, are eligible for inclusion. Sampling will be by consecutive selection, and randomised allocation to one of the two study arms will be determined using a centralised method, following a 1:1 plan (true auriculopressure; placebo auriculopressure). The implants (true and placebo) will be replaced once weekly, and the treatment will have a duration of 8 weeks. The primary outcome measure will be the change in pain intensity, measured on a visual analogue scale (VAS) of 100 mm, at 9 weeks after beginning the treatment. A follow up study will be performed at 6 months after beginning treatment. An assessment will also be made of the changes measured in the Spanish version of the McGill Pain Questionnaire, of the changes in the Lattinen test, and of the changes in quality of life (SF-12). Also planned is an analysis of cost-effectiveness and also, if necessary, a cost-benefit analysis. Discussion This study will contribute to developing evidence on the use of auriculotherapy using Semen vaccariae [wang bu liu xing] for the treatment of uncomplicated chronic rachialgia. Trial registration Current Controlled Trials ISRCTN01897462. PMID:18601750

Tuberculosis treatment outcome monitoring in European Union countries: systematic review

PubMed Central

van Hest, Rob; Ködmön, Csaba; Verver, Suzanne; Erkens, Connie G.M.; Straetemans, Masja; Manissero, Davide; de Vries, Gerard

2013-01-01

Treatment success measured by treatment outcome monitoring (TOM) is a key programmatic output of tuberculosis (TB) control programmes. We performed a systematic literature review on national-level TOM in the 30 European Union (EU)/European Economic Areas (EEA) countries to summarise methods used to collect and report data on TOM. Online reference bibliographic databases PubMed/MEDLINE and EMBASE were searched to identify relevant indexed and non-indexed literature published between January 2000 and August 2010. The search strategy resulted in 615 potentially relevant indexed citations, of which 27 full-text national studies (79 data sets) were included for final analysis. The selected studies were performed in 10 EU/EEA countries and gave a fragmented impression of TOM in the EU/EEA. Publication year, study period, sample size, databases, definitions, variables, patient and outcome categories, and population subgroups varied widely, portraying a very heterogeneous picture. This review confirmed previous reports of considerable heterogeneity in publications of TOM results across EU/EEA countries. PubMed/MEDLINE and EMBASE indexed studies are not a suitable instrument to measure representative TOM results for the 30 EU/EEA countries. Uniform and complete reporting to the centralised European Surveillance System will produce the most timely and reliable results of TB treatment outcomes in the EU/EEA. PMID:22790913

A mechanism for value-sensitive decision-making.

PubMed

Pais, Darren; Hogan, Patrick M; Schlegel, Thomas; Franks, Nigel R; Leonard, Naomi E; Marshall, James A R

2013-01-01

We present a dynamical systems analysis of a decision-making mechanism inspired by collective choice in house-hunting honeybee swarms, revealing the crucial role of cross-inhibitory 'stop-signalling' in improving the decision-making capabilities. We show that strength of cross-inhibition is a decision-parameter influencing how decisions depend both on the difference in value and on the mean value of the alternatives; this is in contrast to many previous mechanistic models of decision-making, which are typically sensitive to decision accuracy rather than the value of the option chosen. The strength of cross-inhibition determines when deadlock over similarly valued alternatives is maintained or broken, as a function of the mean value; thus, changes in cross-inhibition strength allow adaptive time-dependent decision-making strategies. Cross-inhibition also tunes the minimum difference between alternatives required for reliable discrimination, in a manner similar to Weber's law of just-noticeable difference. Finally, cross-inhibition tunes the speed-accuracy trade-off realised when differences in the values of the alternatives are sufficiently large to matter. We propose that the model, and the significant role of the values of the alternatives, may describe other decision-making systems, including intracellular regulatory circuits, and simple neural circuits, and may provide guidance in the design of decision-making algorithms for artificial systems, particularly those functioning without centralised control.

If it ain't broke, don't price fix it: the OFT and the PPRS.

PubMed

Towse, Adrian

2007-07-01

The Office of Fair Trading (OFT) Report on the UK Pharmaceutical Price Regulation Scheme (PPRS) recommends that when the current five-year PPRS expires in 2010 it be replaced with 'value-based pricing' which involves pre-launch centralised government price setting based on a cost-per-QALY threshold plus periodic ex post reviews. I examine the validity of the OFTs criticisms of the existing PPRS, review its proposals and propose an alternative way forward. I conclude that PPRS has performed well as a procurement bargain between industry and the UK government. It does not, however, incentivise efficient relative prices. That is not its job. I identify a number of problems with the OFT proposals. I recommend that key elements of a reformed UK pharmaceutical environment for 2010 should include an expanded role for HTA but with companies retaining freedom to set prices at launch; HTA use targeted via a contingent value of information approach; a retained backstop PPRS, perhaps moving to an RPI-X type control; the use of risk sharing and non-linear pricing arrangements; measures to ensure more effective therapeutic switching at local level; and measures to improve the take up of cost-effective treatments. Copyright (c) 2007 John Wiley & Sons, Ltd.

Cholera - management and prevention.

PubMed

Davies, Hannah G; Bowman, Conor; Luby, Stephen P

2017-06-01

Cholera is an acute secretory diarrhoeal infection caused by the bacterium Vibrio cholerae. It is likely to have originated in the Indian sub-continent; however, it spread to cause six worldwide pandemics between 1817-1923. The ongoing seventh worldwide pandemic of cholera began in 1961. The intensity, duration and severity of cholera epidemics have been increasing, signaling the need for more effective control and prevention measures. The response to the cholera pandemics of the 19th century led to the development of safe and effective sanitation and water systems which have effectively removed the risk of cholera in many settings. However, such systems are not in place to protect billions of people worldwide. Although some progress has been made in expanding access to water in recent years, achieving optimal infrastructure will, in the most optimistic scenario, take decades. Climate change, extreme weather events and rapid urbanisation suggests that alternatives to the current paradigm of providing large centralised water and sanitation systems should be considered, including smaller decentralised systems. The aim of this review paper is to provide an overview of current knowledge regarding management of cholera with a focus on prevention measures including vaccination and water and sanitation interventions. © 2017 The British Infection Association. Published by Elsevier Ltd. All rights reserved.

Optical spectroscopic analysis for the discrimination of extra-virgin olive-oil (Conference Presentation)

NASA Astrophysics Data System (ADS)

McReynolds, Naomi; Auñón Garcia, Juan M.; Guengerich, Zoe; Smith, Terry K.; Dholakia, Kishan

2017-02-01

We present an optical spectroscopic technique, making use of both Raman signals and fluorescence spectroscopy, for the identification of five brands of commercially available extra-virgin olive-oil (EVOO). We demonstrate our technique on both a `bulk-optics' free-space system and a compact device. Using the compact device, which is capable of recording both Raman and fluorescence signals, we achieved an average sensitivity and specificity of 98.4% and 99.6% for discrimination, respectively. Our approach demonstrates that both Raman and fluorescence spectroscopy can be used for portable discrimination of EVOOs which obviates the need to use centralised laboratories and opens up the prospect of in-field testing. This technique may enable detection of EVOO that has undergone counterfeiting or adulteration. One of the main challenges facing Raman spectroscopy for use in quality control of EVOOs is that the oxidation of EVOO, which naturally occurs due to aging, causes shifts in Raman spectra with time, which implies regular retraining would be necessary. We present a potential method of analysis to minimize the effect that aging has on discrimination efficiency; we show that by discarding the first principal component, which contains information on the variations due to oxidation, we can improve discrimination efficiency thus improving the robustness of our technique.

DDS as middleware of the Southern African Large Telescope control system

NASA Astrophysics Data System (ADS)

Maartens, Deneys S.; Brink, Janus D.

2016-07-01

The Southern African Large Telescope (SALT) software control system1 is realised as a distributed control system, implemented predominantly in National Instruments' LabVIEW. The telescope control subsystems communicate using cyclic, state-based messages. Currently, transmitting a message is accomplished by performing an HTTP PUT request to a WebDAV directory on a centralised Apache web server, while receiving is based on polling the web server for new messages. While the method works, it presents a number of drawbacks; a scalable distributed communication solution with minimal overhead is a better fit for control systems. This paper describes our exploration of the Data Distribution Service (DDS). DDS is a formal standard specification, defined by the Object Management Group (OMG), that presents a data-centric publish-subscribe model for distributed application communication and integration. It provides an infrastructure for platform- independent many-to-many communication. A number of vendors provide implementations of the DDS standard; RTI, in particular, provides a DDS toolkit for LabVIEW. This toolkit has been evaluated against the needs of SALT, and a few deficiencies have been identified. We have developed our own implementation that interfaces LabVIEW to DDS in order to address our specific needs. Our LabVIEW DDS interface implementation is built against the RTI DDS Core component, provided by RTI under their Open Community Source licence. Our needs dictate that the interface implementation be platform independent. Since we have access to the RTI DDS Core source code, we are able to build the RTI DDS libraries for any of the platforms on which we require support. The communications functionality is based on UDP multicasting. Multicasting is an efficient communications mechanism with low overheads which avoids duplicated point-to-point transmission of data on a network where there are multiple recipients of the data. In the paper we present a performance evaluation of DDS against the current HTTP-based implementation as well as the historical DataSocket implementation. We conclude with a summary and describe future work.

Dynamic power flow controllers

DOEpatents

Divan, Deepakraj M.; Prasai, Anish

2017-03-07

Dynamic power flow controllers are provided. A dynamic power flow controller may comprise a transformer and a power converter. The power converter is subject to low voltage stresses and not floated at line voltage. In addition, the power converter is rated at a fraction of the total power controlled. A dynamic power flow controller controls both the real and the reactive power flow between two AC sources having the same frequency. A dynamic power flow controller inserts a voltage with controllable magnitude and phase between two AC sources; thereby effecting control of active and reactive power flows between two AC sources.

The productive techniques and constitutive effects of 'evidence-based policy' and 'consumer participation' discourses in health policy processes.

PubMed

Lancaster, K; Seear, K; Treloar, C; Ritter, A

2017-03-01

For over twenty years there have been calls for greater 'consumer' participation in health decision-making. While it is recognised by governments and other stakeholders that 'consumer' participation is desirable, barriers to meaningful involvement nonetheless remain. It has been suggested that the reifying of 'evidence-based policy' may be limiting opportunities for participation, through the way this discourse legitimates particular voices to the exclusion of others. Others have suggested that assumptions underpinning the very notion of the 'affected community' or 'consumers' as fixed and bounded 'policy publics' need to be problematised. In this paper, drawing on interviews (n = 41) with individuals closely involved in Australian drug policy discussions, we critically interrogate the productive techniques and constitutive effects of 'evidence-based policy' and 'consumer participation' discourses in the context of drug policy processes. To inform our analysis, we draw on and combine a number of critical perspectives including Foucault's concept of subjugated knowledges, the work of feminist theorists, as well as recent work regarding conceptualisations of emergent policy publics. First, we explore how the subject position of 'consumer' might be seen as enacted in the material-discursive practices of 'evidence-based policy' and 'consumer participation' in drug policy processes. Secondly, we consider the centralising power-effects of the dominant 'evidence-based policy' paradigm, and how resistance may be thought about in this context. We suggest that such interrogation has potential to recast the call for 'consumer' participation in health policy decision-making and drug policy processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developing national on-line services to annotate and analyse underwater imagery in a research cloud

NASA Astrophysics Data System (ADS)

Proctor, R.; Langlois, T.; Friedman, A.; Davey, B.

2017-12-01

Fish image annotation data is currently collected by various research, management and academic institutions globally (+100,000's hours of deployments) with varying degrees of standardisation and limited formal collaboration or data synthesis. We present a case study of how national on-line services, developed within a domain-oriented research cloud, have been used to annotate habitat images and synthesise fish annotation data sets collected using Autonomous Underwater Vehicles (AUVs) and baited remote underwater stereo-video (stereo-BRUV). Two developing software tools have been brought together in the marine science cloud to provide marine biologists with a powerful service for image annotation. SQUIDLE+ is an online platform designed for exploration, management and annotation of georeferenced images & video data. It provides a flexible annotation framework allowing users to work with their preferred annotation schemes. We have used SQUIDLE+ to sample the habitat composition and complexity of images of the benthos collected using stereo-BRUV. GlobalArchive is designed to be a centralised repository of aquatic ecological survey data with design principles including ease of use, secure user access, flexible data import, and the collection of any sampling and image analysis information. To easily share and synthesise data we have implemented data sharing protocols, including Open Data and synthesis Collaborations, and a spatial map to explore global datasets and filter to create a synthesis. These tools in the science cloud, together with a virtual desktop analysis suite offering python and R environments offer an unprecedented capability to deliver marine biodiversity information of value to marine managers and scientists alike.

A scientometrics and social network analysis of Malaysian research in physics

NASA Astrophysics Data System (ADS)

Tan, H. X.; Ujum, E. A.; Ratnavelu, K.

2014-03-01

This conference proceeding presents an empirical assessment on the domestic publication output and structure of scientific collaboration of Malaysian authors for the field of physics. Journal articles with Malaysian addresses for the subject area "Physics" and other sub-discipline of physics were retrieved from the Thomson Reuters Web of Knowledge database spanning the years 1980 to 2011. A scientometrics and social network analysis of the Malaysian physics field was conducted to examine the publication growth and distribution of domestic collaborative publications; the giant component analysis; and the degree, closeness, and betweenness centralisation scores for the domestic co-authorship networks. Using these methods, we are able to gain insights on the evolution of collaboration and scientometric dimensions of Malaysian research in physics over time.

A model for decentralised grey wastewater treatment system in Singapore public housing.

PubMed

Lim, J; Jern, Ng Wun; Chew, K L; Kallianpur, V

2002-01-01

Global concerns over the sustainable use of natural resources provided the impetus for research into water reclamation from wastewater within the Singapore context. The objective of the research is to study and develop a water infrastructure system as an integral element of architecture and the urbanscape, thereby reducing the need for the large area requirements associated with centralised treatment plants. The decentralised plants were considered so as to break up the large contiguous plot of land otherwise needed, into smaller integrated fragments, which can be incorporated within the housing scheme. This liberated more usable space on the ground plane of the urban housing master plan, enabling water-edge and waterscape relationships within both the private and public domains of varying scale.

Wordless intervention for people with epilepsy and learning disabilities (WIELD): a randomised controlled feasibility trial

PubMed Central

Mengoni, Silvana E; Gates, Bob; Parkes, Georgina; Wellsted, David; Barton, Garry; Ring, Howard; Khoo, Mary Ellen; Monji-Patel, Deela; Friedli, Karin; Zia, Asif; Irvine, Lisa; Durand, Marie-Anne

2016-01-01

Objective To investigate the feasibility of a full-scale randomised controlled trial of a picture booklet to improve quality of life for people with epilepsy and learning disabilities. Trial design A randomised controlled feasibility trial. Randomisation was not blinded and was conducted using a centralised secure database and a blocked 1:1 allocation ratio. Setting Epilepsy clinics in 1 English National Health Service (NHS) Trust. Participants Patients with learning disabilities and epilepsy who had: a seizure within the past 12 months, meaningful communication and a carer with sufficient proficiency in English. Intervention Participants in the intervention group used a picture booklet with a trained researcher, and a carer present. These participants kept the booklet, and were asked to use it at least twice more over 20 weeks. The control group received treatment as usual, and were provided with a booklet at the end of the study. Outcome measures 7 feasibility criteria were used relating to recruitment, data collection, attrition, potential effect on epilepsy-related quality of life (Epilepsy and Learning Disabilities Quality of Life Scale, ELDQOL) at 4-week, 12-week and 20-week follow-ups, feasibility of methodology, acceptability of the intervention and potential to calculate cost-effectiveness. Outcome The recruitment rate of eligible patients was 34% and the target of 40 participants was reached. There was minimal missing data and attrition. An intention-to-treat analysis was performed; data from the outcome measures suggest a benefit from the intervention on the ELDQOL behaviour and mood subscales at 4 and 20 weeks follow-up. The booklet and study methods were positively received, and no adverse events were reported. There was a positive indication of the potential for a cost-effectiveness analysis. Conclusions All feasibility criteria were fully or partially met, therefore confirming feasibility of a definitive trial. Trial registration number ISRCTN80067039. PMID:28186943

Wordless intervention for people with epilepsy and learning disabilities (WIELD): a randomised controlled feasibility trial.

PubMed

Mengoni, Silvana E; Gates, Bob; Parkes, Georgina; Wellsted, David; Barton, Garry; Ring, Howard; Khoo, Mary Ellen; Monji-Patel, Deela; Friedli, Karin; Zia, Asif; Irvine, Lisa; Durand, Marie-Anne

2016-11-10

To investigate the feasibility of a full-scale randomised controlled trial of a picture booklet to improve quality of life for people with epilepsy and learning disabilities. A randomised controlled feasibility trial. Randomisation was not blinded and was conducted using a centralised secure database and a blocked 1:1 allocation ratio. Epilepsy clinics in 1 English National Health Service (NHS) Trust. Patients with learning disabilities and epilepsy who had: a seizure within the past 12 months, meaningful communication and a carer with sufficient proficiency in English. Participants in the intervention group used a picture booklet with a trained researcher, and a carer present. These participants kept the booklet, and were asked to use it at least twice more over 20 weeks. The control group received treatment as usual, and were provided with a booklet at the end of the study. 7 feasibility criteria were used relating to recruitment, data collection, attrition, potential effect on epilepsy-related quality of life (Epilepsy and Learning Disabilities Quality of Life Scale, ELDQOL) at 4-week, 12-week and 20-week follow-ups, feasibility of methodology, acceptability of the intervention and potential to calculate cost-effectiveness. The recruitment rate of eligible patients was 34% and the target of 40 participants was reached. There was minimal missing data and attrition. An intention-to-treat analysis was performed; data from the outcome measures suggest a benefit from the intervention on the ELDQOL behaviour and mood subscales at 4 and 20 weeks follow-up. The booklet and study methods were positively received, and no adverse events were reported. There was a positive indication of the potential for a cost-effectiveness analysis. All feasibility criteria were fully or partially met, therefore confirming feasibility of a definitive trial. ISRCTN80067039. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

14 CFR 27.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Control Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or power-operated... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Power boost and power-operated control...

14 CFR 29.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Control Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or power-operated... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Power boost and power-operated control...

Power flow control using quadrature boosters

NASA Astrophysics Data System (ADS)

Sadanandan, Sandeep N.

A power system that can be controlled within security constraints would be an advantage to power planners and real-time operators. Controlling flows can lessen reliability issues such as thermal limit violations, power stability problems, and/or voltage stability conditions. Control of flows can also mitigate market issues by reducing congestion on some lines and rerouting power to less loaded lines or onto preferable paths. In the traditional control of power flows, phase shifters are often used. More advanced methods include using Flexible AC Transmission System (FACTS) Controllers. Some examples include Thyristor Controlled Series Capacitors, Synchronous Series Static Compensators, and Unified Power Flow Controllers. Quadrature Boosters (QBs) have similar structures to phase-shifters, but allow for higher voltage magnitude during real power flow control. In comparison with other FACTS controllers QBs are not as complex and not as expensive. The present study proposes to use QBs to control power flows on a power system. With the inclusion of QBs, real power flows can be controlled to desired scheduled values. In this thesis, the linearized power flow equations used for power flow analysis were modified for the control problem. This included modifying the Jacobian matrix, the power error vector, and calculating the voltage injected by the quadrature booster for the scheduled real power flow. Two scenarios were examined using the proposed power flow control method. First, the power flow in a line in a 5-bus system was modified with a QB using the method developed in this thesis. Simulation was carried out using Matlab. Second, the method was applied to a 30-bus system and then to a 118-bus system using several QBs. In all the cases, the calculated values of the QB voltages led to desired power flows in the designated line.

Distributed solid state programmable thermostat/power controller

NASA Technical Reports Server (NTRS)

Smith, Dennis A. (Inventor); Alexander, Jane C. (Inventor); Howard, David E. (Inventor)

2008-01-01

A self-contained power controller having a power driver switch, programmable controller, communication port, and environmental parameter measuring device coupled to a controllable device. The self-contained power controller needs only a single voltage source to power discrete devices, analog devices, and the controlled device. The programmable controller has a run mode which, when selected, upon the occurrence of a trigger event changes the state of a power driver switch and wherein the power driver switch is maintained by the programmable controller at the same state until the occurrence of a second event.

Mobile Modelling for Crowdsourcing Building Interior Data

NASA Astrophysics Data System (ADS)

Rosser, J.; Morley, J.; Jackson, M.

2012-06-01

Indoor spatial data forms an important foundation to many ubiquitous computing applications. It gives context to users operating location-based applications, provides an important source of documentation of buildings and can be of value to computer systems where an understanding of environment is required. Unlike external geographic spaces, no centralised body or agency is charged with collecting or maintaining such information. Widespread deployment of mobile devices provides a potential tool that would allow rapid model capture and update by a building's users. Here we introduce some of the issues involved in volunteering building interior data and outline a simple mobile tool for capture of indoor models. The nature of indoor data is inherently private; however in-depth analysis of this issue and legal considerations are not discussed in detail here.

Inter-lab proteomics: data mining in collaborative projects on the basis of the HUPO brain proteome project's pilot studies.

PubMed

Hamacher, Michael; Gröttrup, Bernd; Eisenacher, Martin; Marcus, Katrin; Park, Young Mok; Meyer, Helmut E; Kwon, Kyung-Hoon; Stephan, Christian

2011-01-01

Several projects were initiated by the Human Proteome Organisation (HUPO) focusing on the proteome analysis of distinct human organs. The initiative dedicated to the brain, its development and correlated diseases is the HUPO Brain Proteome Project (HUPO BPP). An objective data submission, storage, and reprocessing strategy have been established with the help of the results gained in a pilot study phase and within subsequent studies. The bioinformatic relevance of the data is drawn from the inter-laboratory comparisons as well as from the recalculation of all data sets submitted by the different groups. In the following, results of the single groups as well as the centralised reprocessing effort are summarised, demonstrating the added-value of this concerted work.

Improvements urban and rural women wish to see in their health care services.

PubMed

Walton, V A; Romans-Clarkson, S E; Mullen, P E

1988-02-24

This study asked 2000 women randomly selected from the community to comment on their health services. Three-quarters did so; one-quarter were satisfied with currently available services but 45% specified changes they would like to see. The criticisms fell into three broad groups: (a) hospital services where delays, centralisation and referral paths were criticised; (b) general practice where doctor-patient communication was mentioned; and (c) cost of certain health services. Women who criticised currently available services tended to be younger, better educated with higher socioeconomic status, to be in paid employment and to have more often poor health or a close relative with poor health than the women who made no comment. These findings are seen as constructive comments from a thoughtful and informed group of health consumers.

Buyer-vendor coordination for fixed lifetime product with quantity discount under finite production rate

NASA Astrophysics Data System (ADS)

Zhang, Qinghong; Luo, Jianwen; Duan, Yongrui

2016-03-01

Buyer-vendor coordination has been widely addressed; however, the fixed lifetime of the product is seldom considered. In this paper, we study the coordination of an integrated production-inventory system with quantity discount for a fixed lifetime product under finite production rate and deterministic demand. We first derive the buyer's ordering policy and the vendor's production batch size in decentralised and centralised systems. We then compare the two systems and show the non-coordination of the ordering policies and the production batch sizes. To improve the supply chain efficiency, we propose quantity discount contract and prove that the contract can coordinate the buyer-vendor supply chain. Finally, we present analytically tractable solutions and give a numerical example to illustrate the benefits of the proposed quantity discount strategy.

DataBase on Demand

NASA Astrophysics Data System (ADS)

Gaspar Aparicio, R.; Gomez, D.; Coterillo Coz, I.; Wojcik, D.

2012-12-01

At CERN a number of key database applications are running on user-managed MySQL database services. The database on demand project was born out of an idea to provide the CERN user community with an environment to develop and run database services outside of the actual centralised Oracle based database services. The Database on Demand (DBoD) empowers the user to perform certain actions that had been traditionally done by database administrators, DBA's, providing an enterprise platform for database applications. It also allows the CERN user community to run different database engines, e.g. presently open community version of MySQL and single instance Oracle database server. This article describes a technology approach to face this challenge, a service level agreement, the SLA that the project provides, and an evolution of possible scenarios.

Damping torque analysis of VSC-based system utilizing power synchronization control

NASA Astrophysics Data System (ADS)

Fu, Q.; Du, W. J.; Zheng, K. Y.; Wang, H. F.

2017-05-01

Power synchronization control is a new control strategy of VSC-HVDC for connecting a weak power system. Different from the vector control method, this control method utilizes the internal synchronization mechanism in ac systems, in principle, similar to the operation of a synchronous machine. So that the parameters of controllers in power synchronization control will change the electromechanical oscillation modes and make an impact on the transient stability of power system. This paper present a mathematical model for small-signal stability analysis of VSC station used power synchronization control and analyse the impact of the dynamic interactions by calculating the contribution of the damping torque from the power synchronization control, besides, the parameters of controllers which correspond to damping torque and synchronous torque in the power synchronization control is defined respectively. At the end of the paper, an example power system is presented to demonstrate and validate the theoretical analysis and associated conclusions are made.

Babylonian observations

NASA Astrophysics Data System (ADS)

Brown, D.

Very few cuneiform records survive from Mesopotamia of datable astronomical observations made prior to the mid-eighth century BC. Those that do record occasional eclipses, and in one isolated case the dates of the heliacal rising and setting of Venus over a few years sometime in the first half of the second millennium BC. After the mid-eighth century BC the situation changes dramatically. Incomplete records of daily observations of astronomical and meteorological events are preserved from c. 747 BC until the Christian Period. These records are without accompanying ominous interpretation, although it is highly probable that they were compiled by diviners for astrological purposes. They include numerous observations of use to historical astronomers, such as the times of eclipses and occultations, and the dates of comet appearances and meteor showers. The question arises as to why such records do not survive from earlier times; celestial divination was employed as far back as the third millenium BC. It is surely not without importance that the earliest known accurate astronomical predictions accompany the later records, and that the mid-eighth century BC ushered in a period of centralised Assyrian control of Mesopotamia and the concomitant employment by the Assyrian ruler of large numbers of professional celestial diviners. The programme of daily observations evidently began when a high premium was first set on the accurate astronomical prediction of ominous events. It is in this light that we must approach this valuable source material for historical astronomy.

Design Considerations for Gun Propellant Climatic Storage Chambers.

DTIC Science & Technology

1982-11-01

Schematic diagram of thermal element 5 4. Prototype Lhermal element 6 5. Power control circuit diagram 7 6. Power control module 7 7. Temperature...plates. Each plate is powered through a triac and temperature control circuit as shown in figure 5. Figure 6 is a photograph of an assembled power control...SHEATER PLATES Figure 5. Power control circuit diagram 4 f Figure 6. Power control module WSR.L-0295-TR -8- Figure 7. Temperature control module 9 -WSRL

Control voltage and power fluctuations when connecting wind farms

NASA Astrophysics Data System (ADS)

Berinde, Ioan; Bǎlan, Horia; Oros Pop, Teodora Susana

2015-12-01

Voltage, frequency, active power and reactive power are very important parameters in terms of power quality. These parameters are followed when connecting any power plant, the more the connection of wind farms. Connecting wind farms to the electricity system must not cause interference outside the limits set by regulations. Modern solutions for fast and automatic voltage control and power fluctuations using electronic control systems of reactive power flows. FACTS (Flexible Alternating Current Transmision System) systems, established on the basis of power electronic circuits ensure control of electrical status quantities to achieve the necessary transfer of power to the power grid. FACTS devices can quickly control parameters and sizes of state power lines, such as impedance line voltages and phase angles of the voltages of the two ends of the line. Their use can lead to improvement in power system operation by increasing the transmission capacity of power lines, power flow control lines, improved static and transient stability reserve.

Wireless power charging using point of load controlled high frequency power converters

DOEpatents

Miller, John M.; Campbell, Steven L.; Chambon, Paul H.; Seiber, Larry E.; White, Clifford P.

2015-10-13

An apparatus for wirelessly charging a battery of an electric vehicle is provided with a point of load control. The apparatus includes a base unit for generating a direct current (DC) voltage. The base unit is regulated by a power level controller. One or more point of load converters can be connected to the base unit by a conductor, with each point of load converter comprising a control signal generator that transmits a signal to the power level controller. The output power level of the DC voltage provided by the base unit is controlled by power level controller such that the power level is sufficient to power all active load converters when commanded to do so by any of the active controllers, without generating excessive power that may be otherwise wasted.

Geospatial Data as a Service: Towards planetary scale real-time analytics

NASA Astrophysics Data System (ADS)

Evans, B. J. K.; Larraondo, P. R.; Antony, J.; Richards, C. J.

2017-12-01

The rapid growth of earth systems, environmental and geophysical datasets poses a challenge to both end-users and infrastructure providers. For infrastructure and data providers, tasks like managing, indexing and storing large collections of geospatial data needs to take into consideration the various use cases by which consumers will want to access and use the data. Considerable investment has been made by the Earth Science community to produce suitable real-time analytics platforms for geospatial data. There are currently different interfaces that have been defined to provide data services. Unfortunately, there is considerable difference on the standards, protocols or data models which have been designed to target specific communities or working groups. The Australian National University's National Computational Infrastructure (NCI) is used for a wide range of activities in the geospatial community. Earth observations, climate and weather forecasting are examples of these communities which generate large amounts of geospatial data. The NCI has been carrying out significant effort to develop a data and services model that enables the cross-disciplinary use of data. Recent developments in cloud and distributed computing provide a publicly accessible platform where new infrastructures can be built. One of the key components these technologies offer is the possibility of having "limitless" compute power next to where the data is stored. This model is rapidly transforming data delivery from centralised monolithic services towards ubiquitous distributed services that scale up and down adapting to fluctuations in the demand. NCI has developed GSKY, a scalable, distributed server which presents a new approach for geospatial data discovery and delivery based on OGC standards. We will present the architecture and motivating use-cases that drove GSKY's collaborative design, development and production deployment. We show our approach offers the community valuable exploratory analysis capabilities, for dealing with petabyte-scale geospatial data collections.

ExoMars Trace Gas Orbiter Instrument Modelling Approach to Streamline Science Operations

NASA Astrophysics Data System (ADS)

Munoz Fernandez, Michela; Frew, David; Ashman, Michael; Cardesin Moinelo, Alejandro; Garcia Beteta, Juan Jose; Geiger, Bernhard; Metcalfe, Leo; Nespoli, Federico; Muniz Solaz, Carlos

2018-05-01

ExoMars Trace Gas Orbiter (TGO) science operations activities are centralised at ESAC's Science Operations Centre (SOC). The SOC receives the inputs from the principal investigators (PIs) in order to implement and deliver the spacecraft pointing requests and instrument timelines to the Mission Operations Centre (MOC). The high number of orbits per planning cycle has made it necessary to abstract the planning interactions between the SOC and the PI teams at the observation level. This paper describes the modelling approach we have conducted for TGOís instruments to streamline science operations. We have created dynamic observation types that scale to adapt to the conditions specified by the PI teams including observation timing, and pointing block parameters calculated from observation geometry. This approach is considered and improvement with respect to previous missions where the generation of the observation pointing and commanding requests was performed manually by the instrument teams. Automation software assists us to effectively handle the high density of planned orbits with increasing volume of scientific data and to successfully meet opportunistic scientific goals and objectives. Our planning tool combines the instrument observation definition files provided by the PIs together with the flight dynamics products to generate the Pointing Requests and the instrument timeline (ITL). The ITL contains all the validated commands at the TC sequence level and computes the resource envelopes (data rate, power, data volume) within the constraints. At the SOC, our main goal is to maximise the science output while minimising the number of iterations among the teams, ensuring that the timeline does not violate the state transitions allowed in the Mission Operations Rules and Constraints Document.

Power inverter implementing phase skipping control

DOEpatents

Somani, Utsav; Amirahmadi, Ahmadreza; Jourdan, Charles; Batarseh, Issa

2016-10-18

A power inverter includes a DC/AC inverter having first, second and third phase circuitry coupled to receive power from a power source. A controller is coupled to a driver for each of the first, second and third phase circuitry (control input drivers). The controller includes an associated memory storing a phase skipping control algorithm, wherein the controller is coupled to receive updating information including a power level generated by the power source. The drivers are coupled to control inputs of the first, second and third phase circuitry, where the drivers are configured for receiving phase skipping control signals from the controller and outputting mode selection signals configured to dynamically select an operating mode for the DC/AC inverter from a Normal Control operation and a Phase Skipping Control operation which have different power injection patterns through the first, second and third phase circuitry depending upon the power level.

Power throttling of collections of computing elements

DOEpatents

Bellofatto, Ralph E [Ridgefield, CT; Coteus, Paul W [Yorktown Heights, NY; Crumley, Paul G [Yorktown Heights, NY; Gara, Alan G [Mount Kidsco, NY; Giampapa, Mark E [Irvington, NY; Gooding,; Thomas, M [Rochester, MN; Haring, Rudolf A [Cortlandt Manor, NY; Megerian, Mark G [Rochester, MN; Ohmacht, Martin [Yorktown Heights, NY; Reed, Don D [Mantorville, MN; Swetz, Richard A [Mahopac, NY; Takken, Todd [Brewster, NY

2011-08-16

An apparatus and method for controlling power usage in a computer includes a plurality of computers communicating with a local control device, and a power source supplying power to the local control device and the computer. A plurality of sensors communicate with the computer for ascertaining power usage of the computer, and a system control device communicates with the computer for controlling power usage of the computer.

Mandated Local Health Networks across the province of Québec: a better collaboration with primary care working in the communities?

PubMed

Breton, Mylaine; Maillet, Lara; Haggerty, Jeannie; Vedel, Isabelle

2014-01-01

Background In 2004, the Québec government implemented an important reform of the healthcare system. The reform was based on the creation of new organisations called Health Services and Social Centres (HSSC), which were formed by merging several healthcare organisations. Upon their creation, each HSSC received the legal mandate to establish and lead a Local Health Network (LHN) with different partners within their territory. This mandate promotes a 'population-based approach' based to the responsibility for the population of a local territory. Objective The aim of this paper is to illustrate and discuss how primary healthcare organisations (PHC) are involved in mandated LHNs in Québec. For illustration, we describe four examples that facilitate a better understanding of these integrated relationships. Results The development of the LHNs and the different collaboration relationships are described through four examples: (1) improving PHC services within the LHN - an example of new PHC models; (2) improving access to specialists and diagnostic tests for family physicians working in the community - an example of centralised access to specialists services; (3) improving chronic-disease-related services for the population of the LHN - an example of a Diabetes Centre; and (4) improving access to family physicians for the population of the LHN - an example of the centralised waiting list for unattached patients. Conclusion From these examples, we can see that the implementation of large-scale reform involves incorporating actors at all levels in the system, and facilitates collaboration between healthcare organisations, family physicians and the community. These examples suggest that the reform provided room for multiple innovations. The planning and organisation of health services became more focused on the population of a local territory. The LHN allows a territorial vision of these planning and organisational processes to develop. LHN also seems a valuable lever when all the stakeholders are involved and when the different organisations serve the community by providing acute care and chronic care, while taking into account the social, medical and nursing fields.

What are the critical steps in processing blood cultures? A prospective audit evaluating current practice of reporting blood cultures in a centralised laboratory serving secondary care hospitals.

PubMed

Meda, Manjula; Clayton, James; Varghese, Reela; Rangaiah, Jayakeerthi; Grundy, Clive; Dashti, Farnaz; Garner, David; Groves, Katherine; Fitzmaurice, Karen; Hutley, E

2017-04-01

To assess current procedures of processing positive blood cultures against national standards with an aim to evaluate its clinical impact and to determine the utility of currently available rapid identification and susceptibility tests in processing of blood cultures. Blood cultures from three secondary care hospitals, processed at a centralised laboratory, were prospectively audited. Data regarding processing times, communication with prescribers, changes to patient management and mortality within 30 days of a significant blood culture were collected in a preplanned pro forma for a 4-week period. Of 2206 blood cultures, 211 positive blood cultures flagged positive. Sixty-nine (3.1%) of all cultures were considered to be contaminated. Fifty per cent of blood cultures that flagged positive had a Gram stain reported within 2 hours. Two (0.99%) patients with a significant bacteraemia had escalation of antimicrobial treatment at the point of reporting the Gram stain that was subsequently deemed necessary once sensitivity results were known. Most common intervention was de-escalation of therapy for Gram-positive organisms at the point of availability of pathogen identification (25.6% in Gram positive vs 10% in Gram negative; p=0.012). For Gram-negative organisms, the most common intervention was de-escalation of therapy at the point of availability of sensitivity results (43% in Gram negatives vs 17.9% in Gram positive; p=0.0097). Overall mortality within 30 days of a positive blood culture was 10.9% (23/211). Antibiotic resistance may have contributed to mortality in four of these patients (three Gram negative and one Gram positive). Gram stain result had the least impact on antibiotic treatment interventions (escalation or de-escalation). Tests that improve identification time for Gram-positive pathogens and sensitivity time for Gram-negative pathogens had the greatest impact in making significant changes to antimicrobial treatment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Insights of health district managers on the implementation of primary health care outreach teams in Johannesburg, South Africa: a descriptive study with focus group discussions.

PubMed

Moosa, Shabir; Derese, Anselme; Peersman, Wim

2017-01-21

Primary health care (PHC) outreach teams are part of a policy of PHC re-engineering in South Africa. It attempts to move the deployment of community health workers (CHWs) from vertical programmes into an integrated generalised team-based approach to care for defined populations in municipal wards. There has little evaluation of PHC outreach teams. Managers' insights are anecdotal. This is descriptive qualitative study with focus group discussions with health district managers of Johannesburg, the largest city in South Africa. This was conducted in a sequence of three meetings with questions around implementation, human resources, and integrated PHC teamwork. There was a thematic content analysis of validated transcripts using the framework method. There were two major themes: leadership-management challenges and human resource challenges. Whilst there was some positive sentiment, leadership-management challenges loomed large: poor leadership and planning with an under-resourced centralised approach, poor communications both within the service and with community, concerns with its impact on current services and resistance to change, and poor integration, both with other streams of PHC re-engineering and current district programmes. Discussion by managers on human resources was mostly on the plight of CHWs and calls for formalisation of CHWs functioning and training and nurse challenges with inappropriate planning and deployment of the team structure, with brief mention of the extended team. Whilst there is positive sentiment towards intent of the PHC outreach team, programme managers in Johannesburg were critical of management of the programme in their health district. Whilst the objective of PHC reform is people-centred health care, its implementation struggles with a centralising tendency amongst managers in the health service in South Africa. Managers in Johannesburg advocated for decentralisation. The implementation of PHC outreach teams is also limited by difficulties with formalisation and training of CHWs and appropriate task shifting to nurses. Change management is required to create true integrate PHC teamwork. Policy review requires addressing these issues.

Improving access to medicines through centralised dispensing in the public sector: a case study of the Chronic Dispensing Unit in the Western Cape Province, South Africa.

PubMed

Magadzire, Bvudzai Priscilla; Marchal, Bruno; Ward, Kim

2015-11-17

The Chronic Dispensing Unit (CDU) is an out-sourced, public sector centralised dispensing service that has been operational in the Western Cape Province in South Africa since 2005. The CDU dispenses medicines for stable patients with chronic conditions. The aim is to reduce pharmacists' workload, reduce patient waiting times and decongest healthcare facilities. Our objectives are to describe the intervention's scope, illustrate its interface with the health system and describe its processes and outcomes. Secondly, to quantify the magnitude of missed appointments by enrolled patients and to describe the implications thereof in order to inform a subsequent in-depth empirical study on the underlying causes. We adopted a case study design in order to elicit the programme theory underlying the CDU strategy. We consulted 15 senior and middle managers from the provincial Department of Health who were working closely with the intervention and the contractor using focus group discussions and key informant interviews. In addition, relevant literature, and policy and programme documents were reviewed and analysed. We found that the CDU scope has significantly expanded over the last 10 years owing to technological advancements. As such, in early 2015, the CDU produced nearly 300,000 parcels monthly. Medicines supply, patient enrollment processes, healthcare professionals' compliance to legislation and policies, mechanisms for medicines distribution, management of non-collected medicines (emanating from patients' missed appointments) and the array of actors involved are all central to the CDU's functioning. Missed appointments by patients are a problem, affecting an estimated 8%-12% of patients each month. However, the causes have not been investigated thoroughly. Implications of missed appointments include a cost to government for services rendered by the contractor, potential losses due to expired medicines, additional workload for the contractor and healthcare facility staff and potential negative therapeutic outcomes for patients. The CDU demonstrates innovation in a context of overwhelming demand for dispensing medicines for chronic conditions. However, it is not a panacea to address access-to-medicines related challenges. A multi-level assessment that is currently underway will provide more insights on how existing challenges can be addressed.

Real-Time Load-Side Control of Electric Power Systems

NASA Astrophysics Data System (ADS)

Zhao, Changhong

Two trends are emerging from modern electric power systems: the growth of renewable (e.g., solar and wind) generation, and the integration of information technologies and advanced power electronics. The former introduces large, rapid, and random fluctuations in power supply, demand, frequency, and voltage, which become a major challenge for real-time operation of power systems. The latter creates a tremendous number of controllable intelligent endpoints such as smart buildings and appliances, electric vehicles, energy storage devices, and power electronic devices that can sense, compute, communicate, and actuate. Most of these endpoints are distributed on the load side of power systems, in contrast to traditional control resources such as centralized bulk generators. This thesis focuses on controlling power systems in real time, using these load side resources. Specifically, it studies two problems. (1) Distributed load-side frequency control: We establish a mathematical framework to design distributed frequency control algorithms for flexible electric loads. In this framework, we formulate a category of optimization problems, called optimal load control (OLC), to incorporate the goals of frequency control, such as balancing power supply and demand, restoring frequency to its nominal value, restoring inter-area power flows, etc., in a way that minimizes total disutility for the loads to participate in frequency control by deviating from their nominal power usage. By exploiting distributed algorithms to solve OLC and analyzing convergence of these algorithms, we design distributed load-side controllers and prove stability of closed-loop power systems governed by these controllers. This general framework is adapted and applied to different types of power systems described by different models, or to achieve different levels of control goals under different operation scenarios. We first consider a dynamically coherent power system which can be equivalently modeled with a single synchronous machine. We then extend our framework to a multi-machine power network, where we consider primary and secondary frequency controls, linear and nonlinear power flow models, and the interactions between generator dynamics and load control. (2) Two-timescale voltage control: The voltage of a power distribution system must be maintained closely around its nominal value in real time, even in the presence of highly volatile power supply or demand. For this purpose, we jointly control two types of reactive power sources: a capacitor operating at a slow timescale, and a power electronic device, such as a smart inverter or a D-STATCOM, operating at a fast timescale. Their control actions are solved from optimal power flow problems at two timescales. Specifically, the slow-timescale problem is a chance-constrained optimization, which minimizes power loss and regulates the voltage at the current time instant while limiting the probability of future voltage violations due to stochastic changes in power supply or demand. This control framework forms the basis of an optimal sizing problem, which determines the installation capacities of the control devices by minimizing the sum of power loss and capital cost. We develop computationally efficient heuristics to solve the optimal sizing problem and implement real-time control. Numerical experiments show that the proposed sizing and control schemes significantly improve the reliability of voltage control with a moderate increase in cost.

Adaptive control method for core power control in TRIGA Mark II reactor

NASA Astrophysics Data System (ADS)

Sabri Minhat, Mohd; Selamat, Hazlina; Subha, Nurul Adilla Mohd

2018-01-01

The 1MWth Reactor TRIGA PUSPATI (RTP) Mark II type has undergone more than 35 years of operation. The existing core power control uses feedback control algorithm (FCA). It is challenging to keep the core power stable at the desired value within acceptable error bands to meet the safety demand of RTP due to the sensitivity of nuclear research reactor operation. Currently, the system is not satisfied with power tracking performance and can be improved. Therefore, a new design core power control is very important to improve the current performance in tracking and regulate reactor power by control the movement of control rods. In this paper, the adaptive controller and focus on Model Reference Adaptive Control (MRAC) and Self-Tuning Control (STC) were applied to the control of the core power. The model for core power control was based on mathematical models of the reactor core, adaptive controller model, and control rods selection programming. The mathematical models of the reactor core were based on point kinetics model, thermal hydraulic models, and reactivity models. The adaptive control model was presented using Lyapunov method to ensure stable close loop system and STC Generalised Minimum Variance (GMV) Controller was not necessary to know the exact plant transfer function in designing the core power control. The performance between proposed adaptive control and FCA will be compared via computer simulation and analysed the simulation results manifest the effectiveness and the good performance of the proposed control method for core power control.

46 CFR 58.30-50 - Requirements for miscellaneous fluid power and control systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-50 Requirements for miscellaneous fluid power and control systems. (a) All fluid power and control... 46 Shipping 2 2010-10-01 2010-10-01 false Requirements for miscellaneous fluid power and control...

46 CFR 58.30-50 - Requirements for miscellaneous fluid power and control systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-50 Requirements for miscellaneous fluid power and control systems. (a) All fluid power and control... 46 Shipping 2 2014-10-01 2014-10-01 false Requirements for miscellaneous fluid power and control...

46 CFR 58.30-50 - Requirements for miscellaneous fluid power and control systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-50 Requirements for miscellaneous fluid power and control systems. (a) All fluid power and control... 46 Shipping 2 2013-10-01 2013-10-01 false Requirements for miscellaneous fluid power and control...

46 CFR 58.30-50 - Requirements for miscellaneous fluid power and control systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-50 Requirements for miscellaneous fluid power and control systems. (a) All fluid power and control... 46 Shipping 2 2011-10-01 2011-10-01 false Requirements for miscellaneous fluid power and control...

46 CFR 58.30-50 - Requirements for miscellaneous fluid power and control systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-50 Requirements for miscellaneous fluid power and control systems. (a) All fluid power and control... 46 Shipping 2 2012-10-01 2012-10-01 false Requirements for miscellaneous fluid power and control...

Multi-load Groups Coordinated Load Control Strategy Considering Power Network Constraints

NASA Astrophysics Data System (ADS)

Liu, Meng; Zhao, Binchao; Wang, Jun; Zhang, Guohui; Wang, Xin

2017-05-01

Loads with energy storage property can actively participate in power balance for power systems, this paper takes air conditioner as a controllable load example, proposing a multi-load groups coordinated load control strategy considering power network constraints. Firstly, two load control modes considering recovery of load diversity are designed, blocking power oscillation of aggregated air conditioners. As the same time, air conditioner temperature setpoint recovery control strategy is presented to avoid power recovery peak. Considering inherent characteristics of two load control modes, an coordinated load control mode is designed by combining the both. Basing on this, a multi-load groups coordinated load control strategy is proposed. During the implementing of load control, power network constraints should be satisfied. An indice which can reflect the security of power system operating is defined. By minimizing its value through optimization, the change of air conditioning loads’ aggregated power on each load bus can be calculated. Simulations are conducted on an air conditioners group and New England 10-generator 39-bus system, verifying the effectiveness of the proposed multi-load groups coordinated load control strategy considering power network constraints.

14 CFR 27.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Power boost and power-operated control...

14 CFR 29.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Power boost and power-operated control...

14 CFR 29.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Power boost and power-operated control...

14 CFR 27.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Power boost and power-operated control...

14 CFR 29.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Power boost and power-operated control...

14 CFR 29.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Power boost and power-operated control...

14 CFR 27.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Power boost and power-operated control...

14 CFR 27.695 - Power boost and power-operated control system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or power-operated... failure of all engines. (b) Each alternate system may be a duplicate power portion or a manually operated... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Power boost and power-operated control...

Control voltage and power fluctuations when connecting wind farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berinde, Ioan, E-mail: ioan-berinde@yahoo.com; Bălan, Horia, E-mail: hbalan@mail.utcluj.ro; Oros, Teodora Susana, E-mail: teodoraoros-87@yahoo.com

2015-12-23

Voltage, frequency, active power and reactive power are very important parameters in terms of power quality. These parameters are followed when connecting any power plant, the more the connection of wind farms. Connecting wind farms to the electricity system must not cause interference outside the limits set by regulations. Modern solutions for fast and automatic voltage control and power fluctuations using electronic control systems of reactive power flows. FACTS (Flexible Alternating Current Transmision System) systems, established on the basis of power electronic circuits ensure control of electrical status quantities to achieve the necessary transfer of power to the power grid.more » FACTS devices can quickly control parameters and sizes of state power lines, such as impedance line voltages and phase angles of the voltages of the two ends of the line. Their use can lead to improvement in power system operation by increasing the transmission capacity of power lines, power flow control lines, improved static and transient stability reserve.« less

Description of a MIL-STD-1553B Data Bus Ada Driver for the LeRC EPS Testbed

NASA Technical Reports Server (NTRS)

Mackin, Michael A.

1995-01-01

This document describes the software designed to provide communication between control computers in the NASA Lewis Research Center Electrical Power System Testbed using MIL-STD-1553B. The software drivers are coded in the Ada programming language and were developed on a MSDOS-based computer workstation. The Electrical Power System (EPS) Testbed is a reduced-scale prototype space station electrical power system. The power system manages and distributes electrical power from the sources (batteries or photovoltaic arrays) to the end-user loads. The electrical system primary operates at 120 volts DC, and the secondary system operates at 28 volts DC. The devices which direct the flow of electrical power are controlled by a network of six control computers. Data and control messages are passed between the computers using the MIL-STD-1553B network. One of the computers, the Power Management Controller (PMC), controls the primary power distribution and another, the Load Management Controller (LMC), controls the secondary power distribution. Each of these computers communicates with two other computers which act as subsidiary controllers. These subsidiary controllers are, in turn, connected to the devices which directly control the flow of electrical power.

Tobacco and transition: an overview of industry investments, impact and influence in the former Soviet Union.

PubMed

Gilmore, A B; McKee, M

2004-06-01

To quantify the contribution the tobacco industry has made to foreign direct investment (FDI) in the former Soviet Union (FSU) as an indicator of its political and economic leverage; to explore the impact this has had on production capacity and tobacco control in the region. Data on industry investment and its impact on cigarette production capacity were collated from industry journals, reports, and websites. Data on total FDI were obtained from the European Bank of Reconstruction and Development. By the end of 2000, transnational tobacco companies (TTCs) had invested over 2.7 billion US dollars in 10 countries of the FSU. Tobacco money as a proportion of FDI varies from 1% to over 30% in Uzbekistan. Cigarette production capacity in the factories receiving investments tripled from 146 to 416 billion cigarettes per annum and the TTCs' market share has increased from nothing to between 50-100% in the markets in which they invested. Findings suggest that the effectiveness of national tobacco control measures corresponds broadly to the nature of the political and economic transition in each country and the size of industry investment, which is determined in part by the political context. Thus more effective measures tend to be seen in democratic states with smaller or no industry investments while the least effective measures are seen in highly centralised, one party states with high levels of industry investment or those with limited governmental capacity. The entry of the TTCs at a time of major political and economic change left the FSU particularly vulnerable to industry influence. This influence was enhanced by the industry's significant contribution to FDI, their ability to take over existing state monopolies in all but the largest countries, and the lack of democratic opposition.

Tobacco and transition: an overview of industry investments, impact and influence in the former Soviet Union

PubMed Central

Gilmore, A; McKee, M

2004-01-01

Objectives: To quantify the contribution the tobacco industry has made to foreign direct investment (FDI) in the former Soviet Union (FSU) as an indicator of its political and economic leverage; to explore the impact this has had on production capacity and tobacco control in the region. Design: Data on industry investment and its impact on cigarette production capacity were collated from industry journals, reports, and websites. Data on total FDI were obtained from the European Bank of Reconstruction and Development. Results: By the end of 2000, transnational tobacco companies (TTCs) had invested over US$2.7 billion in 10 countries of the FSU. Tobacco money as a proportion of FDI varies from 1% to over 30% in Uzbekistan. Cigarette production capacity in the factories receiving investments tripled from 146 to 416 billion cigarettes per annum and the TTCs' market share has increased from nothing to between 50–100% in the markets in which they invested. Findings suggest that the effectiveness of national tobacco control measures corresponds broadly to the nature of the political and economic transition in each country and the size of industry investment, which is determined in part by the political context. Thus more effective measures tend to be seen in democratic states with smaller or no industry investments while the least effective measures are seen in highly centralised, one party states with high levels of industry investment or those with limited governmental capacity. Conclusions: The entry of the TTCs at a time of major political and economic change left the FSU particularly vulnerable to industry influence. This influence was enhanced by the industry's significant contribution to FDI, their ability to take over existing state monopolies in all but the largest countries, and the lack of democratic opposition. PMID:15175530

Variability in disease burden and management of rheumatic fever and rheumatic heart disease in two regions of tropical Australia.

PubMed

Rémond, M G W; Severin, K L; Hodder, Y; Martin, J; Nelson, C; Atkinson, D; Maguire, G P

2013-04-01

Acute rheumatic fever (ARF) and rheumatic heart disease (RHD) contribute to Aboriginal Australian and Torres Strait Islander health disadvantage. At the time of this study, specialist ARF/RHD care in the Kimberley region of Western Australia was delivered by a broad range of providers. In contrast, in Far North Queensland (FNQ), a single-provider model was used as part of a coordinated RHD control programme. To review ARF/RHD management in the Kimberley and FNQ to ascertain whether differing models of service delivery are associated with different disease burden and patient care. An audit of ARF/RHD management. Classification and clinical management data were abstracted from health records, specialist letters, echocardiograms and regional registers using a standardised data collection tool. Four hundred and seven patients were identified, with 99% being Aboriginal and/or Torres Strait Islanders. ARF without RHD was seen in 0.4% of Aboriginal and/or Torres Strait Islander residents and RHD in 1.1%. The prevalence of RHD was similar in both regions but with more severe disease in the Kimberley. More FNQ RHD patients had specialist review within recommended time frames (67% vs 45%, χ(2) , P < 0.001). Of patients recommended benzathine penicillin secondary prophylaxis, 17.7% received ≥80% of scheduled doses in the preceding 12 months. Prescription and delivery of secondary prophylaxis was greater in FNQ. FNQ's single-provider model of specialist care and centralised RHD control programme were associated with improved patient care and may partly account for the fewer cases of severe disease and reduced surgical procedures and other interventions observed in this region. © 2012 The Authors; Internal Medicine Journal © 2012 Royal Australasian College of Physicians.

Project youth inform--a school-based sexually transmitted disease/acquired immune deficiency syndrome education programme.

PubMed

Soon, T; Chan, R K; Goh, C L

1995-07-01

A pilot project, ¿Youth Inform¿ endorsed by the Ministry of Health and Ministry of Education, Singapore, was undertaken in 1992 for 2 years. It aims to enhance sexually transmitted disease (STDs)/human immunodeficiency virus (HIV) control in Singapore by providing structured information for young people between the ages of 16 to 20 years in Polytechnics, Junior Colleges, Centralised Institutes and Pre-University Centres. Project Youth Inform comprises 8 components. They include a focus group discussion, a training seminar for teachers, a lecture/slide presentation cum question-and-answer session, an educational booklet/bookmark, exhibitions, a video, provisions for anonymous questions, and an evaluation. The programme is conducted during school hours at the premises of the institutions and the attendance per session is between 150 to 350 students. A total of 152 sessions have been completed for all the schools. It is ongoing and is currently administered by the School Health Service and Training and Health Education Department. Feedback from principals, teachers and students was gathered formally through surveys and informally through interviews and observations. One thousand students were randomly selected for the survey to assess their responses towards the programme. Eighty-six percent reported that they found it educational and informative. Indicators found to have an influence on the effectiveness of the programme were timing, vocabulary used (medical terms) and integration of the programme into the school's curriculum. In conclusion, Project Youth Inform was on the whole positively received. However, it is essential to constantly accommodate and adapt to new facts and methods of teaching and maintain close coordination with the Ministries and the schools. An effective STD/acquired immune deficiency syndrome programme is an important step towards the prevention, management and control of the epidemic.

Waste management and recycling in the former Soviet Union: the City of Bishkek, Kyrgyz Republic (Kyrgyzstan).

PubMed

Sim, Natasha M; Wilson, David C; Velis, Costas A; Smith, Stephen R

2013-10-01

The UN-Habitat Integrated Sustainable Waste Management (ISWM) benchmarking methodology was applied to profile the physical and governance features of municipal solid waste (MSW) management in the former Soviet Union city of Bishkek, capital of the Kyrgyz Republic. Most of the ISWM indicators were in the expected range for a low-income city when compared with 20 reference cities. Approximately 240,000 t yr(-1) of MSW is generated in Bishkek (equivalent to 200 kg capita(-1) yr(-1)); collection coverage is over 80% and 90% of waste disposed goes to semi-controlled sites operating with minimal environmental standards. The waste composition was a distinctive feature, with relatively high paper content (20-27% wt.) and intermediate organic content (30-40% wt.). The study provides the first quantitative estimates of informal sector recycling, which is currently unrecognised by the city authorities. Approximately 18% wt. of generated MSW is recycled, representing an estimated annual saving to the city authorities of US$0.7-1.1 million in avoided collection/disposal costs. The waste management system is controlled by a centralised municipal waste enterprise (Tazalyk); therefore, institutional coherence is high relative to lower-middle and low-income cities. However, performance on other governance factors, such as inclusivity and financial sustainability, is variable. Future priorities in Bishkek include extending collection to unserved communities; improving landfill standards; increasing recycling rates through informal sector cooperation; improving data availability; and engaging all stakeholders in waste management strategy decisions. Extending the scope and flexibility of the ISWM protocol is recommended to better represent the variation in conditions that occur in waste management systems in practice.

Impact of a computer-assisted Screening, Brief Intervention and Referral to Treatment on reducing alcohol consumption among patients with hazardous drinking disorder in hospital emergency departments. The randomized BREVALCO trial.

PubMed

Duroy, David; Boutron, Isabelle; Baron, Gabriel; Ravaud, Philippe; Estellat, Candice; Lejoyeux, Michel

2016-08-01

To assess the impact of a computer-assisted Screening, Brief Intervention, and Referral to Treatment (SBIRT) on daily consumption of alcohol by patients with hazardous drinking disorder detected after systematic screening during their admission to an emergency department (ED). Two-arm, parallel group, multicentre, randomized controlled trial with a centralised computer-generated randomization procedure. Four EDs in university hospitals located in the Paris area in France. Patients admitted in the ED for any reason, with hazardous drinking disorder detected after systematic screening (i.e., Alcohol Use Disorder Identification Test score ≥5 for women and 8 for men OR self-reported alcohol consumption by week ≥7 drinks for women and 14 for men). The experimental intervention was computer-assisted SBIRT and the comparator was a placebo-controlled intervention (i.e., a computer-assisted education program on nutrition). Interventions were administered in the ED and followed by phone reinforcements at 1 and 3 months. The primary outcome was the mean number of alcohol drinks per day in the previous week, at 12 months. Results From May 2005 to February 2011, 286 patients were randomized to the computer-assisted SBIRT and 286 to the comparator intervention. The two groups did not differ in the primary outcome, with an adjusted mean difference of 0.12 (95% confidence interval, -0.88 to 1.11). There was no additional benefit of the computer-assisted alcohol SBIRT as compared with the computer-assisted education program on nutrition among patients with hazardous drinking disorder detected by systematic screening during their admission to an ED. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Reactor vessel annealing system

DOEpatents

Miller, Phillip E.; Katz, Leonoard R.; Nath, Raymond J.; Blaushild, Ronald M.; Tatch, Michael D.; Kordalski, Frank J.; Wykstra, Donald T.; Kavalkovich, William M.

1991-01-01

A system for annealing a vessel (14) in situ by heating the vessel (14) to a defined temperature, composed of: an electrically operated heater assembly (10) insertable into the vessel (14) for heating the vessel (14) to the defined temperature; temperature monitoring components positioned relative to the heater assembly (10) for monitoring the temperature of the vessel (14); a controllable electric power supply unit (32-60) for supplying electric power required by the heater assembly (10); a control unit (80-86) for controlling the power supplied by the power supply unit (32-60); a first vehicle (2) containing the power supply unit (32-60); a second vehicle (4) containing the control unit (80-86); power conductors (18,22) connectable between the power supply unit (32-60) and the heater unit (10) for delivering the power supplied by the power supply unit (32-60) to the heater assembly (10); signal conductors (20,24) connectable between the temperature monitoring components and the control unit (80-86) for delivering temperature indicating signals from the temperature monitoring components to the control unit (80-86); and control conductors (8) connectable between the control unit (80-86) and the power supply unit (32-60) for delivering to the power supply unit (32-60) control signals for controlling the level of power supplied by the power supply unit (32-60) to the heater assembly (10).

48 CFR 19.101 - Explanation of terms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... has the power to control the other, or another concern controls or has the power to control both. In... franchise agreement are not considered in determining whether the franchisor controls or has the power to... indirectly control or have the power to control it. Control may be affirmative or negative and it is...

Frequency control of wind turbine in power system

NASA Astrophysics Data System (ADS)

Xu, Huawei

2018-06-01

In order to improve the stability of the overall frequency of the power system, automatic power generation control and secondary frequency adjustment were applied. Automatic power generation control was introduced into power generation planning. A dual-fed wind generator power regulation model suitable for secondary frequency regulation was established. The results showed that this method satisfied the basic requirements of frequency regulation control of large-scale wind power access power systems and improved the stability and reliability of power system operation. Therefore, this system frequency control method and strategy is relatively simple. The effect is significant. The system frequency can quickly reach a steady state. It is worth applying and promoting.

Adaptive Neural Network Algorithm for Power Control in Nuclear Power Plants

NASA Astrophysics Data System (ADS)

Masri Husam Fayiz, Al

2017-01-01

The aim of this paper is to design, test and evaluate a prototype of an adaptive neural network algorithm for the power controlling system of a nuclear power plant. The task of power control in nuclear reactors is one of the fundamental tasks in this field. Therefore, researches are constantly conducted to ameliorate the power reactor control process. Currently, in the Department of Automation in the National Research Nuclear University (NRNU) MEPhI, numerous studies are utilizing various methodologies of artificial intelligence (expert systems, neural networks, fuzzy systems and genetic algorithms) to enhance the performance, safety, efficiency and reliability of nuclear power plants. In particular, a study of an adaptive artificial intelligent power regulator in the control systems of nuclear power reactors is being undertaken to enhance performance and to minimize the output error of the Automatic Power Controller (APC) on the grounds of a multifunctional computer analyzer (simulator) of the Water-Water Energetic Reactor known as Vodo-Vodyanoi Energetichesky Reaktor (VVER) in Russian. In this paper, a block diagram of an adaptive reactor power controller was built on the basis of an intelligent control algorithm. When implementing intelligent neural network principles, it is possible to improve the quality and dynamic of any control system in accordance with the principles of adaptive control. It is common knowledge that an adaptive control system permits adjusting the controller’s parameters according to the transitions in the characteristics of the control object or external disturbances. In this project, it is demonstrated that the propitious options for an automatic power controller in nuclear power plants is a control system constructed on intelligent neural network algorithms.

Advanced Electric Distribution, Switching, and Conversion Technology for Power Control

NASA Technical Reports Server (NTRS)

Soltis, James V.

1998-01-01

The Electrical Power Control Unit currently under development by Sundstrand Aerospace for use on the Fluids Combustion Facility of the International Space Station is the precursor of modular power distribution and conversion concepts for future spacecraft and aircraft applications. This unit combines modular current-limiting flexible remote power controllers and paralleled power converters into one package. Each unit includes three 1-kW, current-limiting power converter modules designed for a variable-ratio load sharing capability. The flexible remote power controllers can be used in parallel to match load requirements and can be programmed for an initial ON or OFF state on powerup. The unit contains an integral cold plate. The modularity and hybridization of the Electrical Power Control Unit sets the course for future spacecraft electrical power systems, both large and small. In such systems, the basic hybridized converter and flexible remote power controller building blocks could be configured to match power distribution and conversion capabilities to load requirements. In addition, the flexible remote power controllers could be configured in assemblies to feed multiple individual loads and could be used in parallel to meet the specific current requirements of each of those loads. Ultimately, the Electrical Power Control Unit design concept could evolve to a common switch module hybrid, or family of hybrids, for both converter and switchgear applications. By assembling hybrids of a common current rating and voltage class in parallel, researchers could readily adapt these units for multiple applications. The Electrical Power Control Unit concept has the potential to be scaled to larger and smaller ratings for both small and large spacecraft and for aircraft where high-power density, remote power controllers or power converters are required and a common replacement part is desired for multiples of a base current rating.

Power flow controller with a fractionally rated back-to-back converter

DOEpatents

Divan, Deepakraj M.; Kandula, Rajendra Prasad; Prasai, Anish

2016-03-08

A power flow controller with a fractionally rated back-to-back (BTB) converter is provided. The power flow controller provide dynamic control of both active and reactive power of a power system. The power flow controller inserts a voltage with controllable magnitude and phase between two AC sources at the same frequency; thereby effecting control of active and reactive power flows between the two AC sources. A transformer may be augmented with a fractionally rated bi-directional Back to Back (BTB) converter. The fractionally rated BTB converter comprises a transformer side converter (TSC), a direct-current (DC) link, and a line side converter (LSC). By controlling the switches of the BTB converter, the effective phase angle between the two AC source voltages may be regulated, and the amplitude of the voltage inserted by the power flow controller may be adjusted with respect to the AC source voltages.

Integrated-Circuit Controller For Brushless dc Motor

NASA Technical Reports Server (NTRS)

Le, Dong Tuan

1994-01-01

Generic circuit performs commutation-logic and power-switching functions for control of brushless dc motor. Controller includes commutation-logic and associated control circuitry, power supply, and inverters containing power transistors. Major advantages of controller are size, weight, and power consumption can be made less than other brushless-dc-motor controllers.

16 CFR 1205.5 - Walk-behind rotary power mower controls.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Walk-behind rotary power mower controls... rotary power mower controls. (a) Blade control systems—(1) Requirements for blade control. A walk-behind rotary power mower shall have a blade control system that will perform the following functions: (i...

CONTROL AND FAULT DETECTOR CIRCUIT

DOEpatents

Winningstad, C.N.

1958-04-01

A power control and fault detectcr circuit for a radiofrequency system is described. The operation of the circuit controls the power output of a radio- frequency power supply to automatically start the flow of energizing power to the radio-frequency power supply and to gradually increase the power to a predetermined level which is below the point where destruction occurs upon the happening of a fault. If the radio-frequency power supply output fails to increase during such period, the control does not further increase the power. On the other hand, if the output of the radio-frequency power supply properly increases, then the control continues to increase the power to a maximum value. After the maximumn value of radio-frequency output has been achieved. the control is responsive to a ''fault,'' such as a short circuit in the radio-frequency system being driven, so that the flow of power is interrupted for an interval before the cycle is repeated.

An accurate reactive power control study in virtual flux droop control

NASA Astrophysics Data System (ADS)

Wang, Aimeng; Zhang, Jia

2017-12-01

This paper investigates the problem of reactive power sharing based on virtual flux droop method. Firstly, flux droop control method is derived, where complicated multiple feedback loops and parameter regulation are avoided. Then, the reasons for inaccurate reactive power sharing are theoretically analyzed. Further, a novel reactive power control scheme is proposed which consists of three parts: compensation control, voltage recovery control and flux droop control. Finally, the proposed reactive power control strategy is verified in a simplified microgrid model with two parallel DGs. The simulation results show that the proposed control scheme can achieve accurate reactive power sharing and zero deviation of voltage. Meanwhile, it has some advantages of simple control and excellent dynamic and static performance.

A scalable architecture for online anomaly detection of WLCG batch jobs

NASA Astrophysics Data System (ADS)

Kuehn, E.; Fischer, M.; Giffels, M.; Jung, C.; Petzold, A.

2016-10-01

For data centres it is increasingly important to monitor the network usage, and learn from network usage patterns. Especially configuration issues or misbehaving batch jobs preventing a smooth operation need to be detected as early as possible. At the GridKa data and computing centre we therefore operate a tool BPNetMon for monitoring traffic data and characteristics of WLCG batch jobs and pilots locally on different worker nodes. On the one hand local information itself are not sufficient to detect anomalies for several reasons, e.g. the underlying job distribution on a single worker node might change or there might be a local misconfiguration. On the other hand a centralised anomaly detection approach does not scale regarding network communication as well as computational costs. We therefore propose a scalable architecture based on concepts of a super-peer network.

Framework for a clinical information system.

PubMed

Van de Velde, R

2000-01-01

The current status of our work towards the design and implementation of a reference architecture for a Clinical Information System is presented. This architecture has been developed and implemented based on components following a strong underlying conceptual and technological model. Common Object Request Broker and n-tier technology featuring centralised and departmental clinical information systems as the back-end store for all clinical data are used. Servers located in the 'middle' tier apply the clinical (business) model and application rules to communicate with so-called 'thin client' workstations. The main characteristics are the focus on modelling and reuse of both data and business logic as there is a shift away from data and functional modelling towards object modelling. Scalability as well as adaptability to constantly changing requirements via component driven computing are the main reasons for that approach.

Research misconduct: time for a re-think?

PubMed

Breen, K J

2016-06-01

The incidence of research misconduct appears to be increasing, drawing attention in the general media and academic literature. Concerns have been expressed about probable under-reporting, harms arising, lack of an agreed international definition, welfare of whistleblowers and the adequacy of the investigation processes and any subsequent sanctions. A fully satisfactory approach to prevention, detection, investigation and adjudication has yet to emerge. While the definition of research misconduct contained in the Australian Code for the Responsible Conduct of Research is comprehensive, universities and other research institutions at times struggle in their task of investigating and adjudicating allegations of research misconduct. A more centralised, independent process of oversight and monitoring of this role played by the universities and institutions would help support those institutions and help maintain community confidence in the research endeavour. © 2016 Royal Australasian College of Physicians.

The case of a needle exchange policy debate in Fresno, California

PubMed Central

Clarke, KRIS

2016-01-01

Needle exchange is one of the most effective public health interventions to prevent the transmission of infectious disease by injecting drug users. Despite the preponderance of scientific evidence, US federal funding for needle exchange programmes has been banned since 1988. This prohibition has resulted in the lack of a centralised policy on needle exchange and has given birth to a patchwork of diverse practices and regulations throughout the nation. This article focuses on how various local players interpreted the meaning of needle exchange through the debate on an unauthorised site in Fresno, California. In exploring a specific context, this study delineates the narratives used to outline competing views about needle exchange and to offer a snapshot of how the issue of widespread injecting drug use was handled in an impoverished and socially conservative region of the United States. PMID:28035171

Baby on the move: issues in neonatal transport.

PubMed

Teasdale, Debra; Hamilton, Catherine

2008-02-01

The 2003 review of UK neonatal services led to wide-ranging changes including the centralisation of intensive care into level 3 units, the geographical organisation of neonatal care into 'networks', and the setting up of dedicated network transport teams. Despite these changes, neonatal transport continues to be problematic. Approaches to neonatal transportation are not yet standardised and this presents logistical problems for staff. Risks need to be considered and managed effectively to ensure safety for all involved. Although algorithms are in use for general stabilisation of the neonates, more guidance is required for effective stabilisation and management of infants with complex/surgical conditions. Staff involved in transport need to understand how neonatal physiology may be altered during transportation. They should also consider the legal implications of neonatal transport which are likely to remain unclear until the law is challenged in some way.

Globalization and medicine in Trinidad.

PubMed

Reznik, David L; Murphy, John W; Belgrave, Linda Liska

2007-05-01

In a qualitative study of urban Trinidadians who work in the medical industry, the concept of medical globalization was provisionally analysed. Two research questions were addressed: what is globalization, in the context of mainstream medicine, and how is this process manifested in everyday practices? Four fundamental principles of medical globalization emerged from in-depth interviews and analysis of observational materials: (1) the notion of history as an autonomous force with globalization as the latest stage, (2) the expansion of 'Total Market' philosophy as a driving social force, (3) the fragmentation of society into atomistic, self-interested, and competitive individuals, and (4) the adoption of a 'centralised' set of ideals as the normative core necessary for social order. In this paper, findings from this investigation and their implications are discussed. In particular, medical globalization is linked with major themes in medical sociological theory including dualism and medicalization.

A practical approach for active camera coordination based on a fusion-driven multi-agent system

NASA Astrophysics Data System (ADS)

Bustamante, Alvaro Luis; Molina, José M.; Patricio, Miguel A.

2014-04-01

In this paper, we propose a multi-agent system architecture to manage spatially distributed active (or pan-tilt-zoom) cameras. Traditional video surveillance algorithms are of no use for active cameras, and we have to look at different approaches. Such multi-sensor surveillance systems have to be designed to solve two related problems: data fusion and coordinated sensor-task management. Generally, architectures proposed for the coordinated operation of multiple cameras are based on the centralisation of management decisions at the fusion centre. However, the existence of intelligent sensors capable of decision making brings with it the possibility of conceiving alternative decentralised architectures. This problem is approached by means of a MAS, integrating data fusion as an integral part of the architecture for distributed coordination purposes. This paper presents the MAS architecture and system agents.

Dual-loop self-optimizing robust control of wind power generation with Doubly-Fed Induction Generator.

PubMed

Chen, Quan; Li, Yaoyu; Seem, John E

2015-09-01

This paper presents a self-optimizing robust control scheme that can maximize the power generation for a variable speed wind turbine with Doubly-Fed Induction Generator (DFIG) operated in Region 2. A dual-loop control structure is proposed to synergize the conversion from aerodynamic power to rotor power and the conversion from rotor power to the electrical power. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the electric power feedback. The ESC can search for the optimal generator torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. An ℋ(∞) controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Evaluation of power control concepts using the PMAD systems test bed. [Power Management and Distribution

NASA Technical Reports Server (NTRS)

Beach, R. F.; Kimnach, G. L.; Jett, T. A.; Trash, L. M.

1989-01-01

The Lewis Research Center's Power Management and Distribution (PMAD) System testbed and its use in the evaluation of control concepts applicable to the NASA Space Station Freedom electric power system (EPS) are described. The facility was constructed to allow testing of control hardware and software in an environment functionally similar to the space station electric power system. Control hardware and software have been developed to allow operation of the testbed power system in a manner similar to a supervisory control and data acquisition (SCADA) system employed by utility power systems for control. The system hardware and software are described.

Control system development for a 1 MW/e/ solar thermal power plant

NASA Technical Reports Server (NTRS)

Daubert, E. R.; Bergthold, F. M., Jr.; Fulton, D. G.

1981-01-01

The point-focusing distributed receiver power plant considered consists of a number of power modules delivering power to a central collection point. Each power module contains a parabolic dish concentrator with a closed-cycle receiver/turbine/alternator assembly. Currently, a single-module prototype plant is under construction. The major control system tasks required are related to concentrator pointing control, receiver temperature control, and turbine speed control. Attention is given to operational control details, control hardware and software, and aspects of CRT output display.

Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

Three phase power factor controller

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1984-01-01

A power control circuit for a three phase induction motor is described. Power factors for the three phases are summed to provide a control signal, and this control signal is particularly filtered and then employed to control the duty cycle of each phase of input power to the motor.

An Accurate Transmitting Power Control Method in Wireless Communication Transceivers

NASA Astrophysics Data System (ADS)

Zhang, Naikang; Wen, Zhiping; Hou, Xunping; Bi, Bo

2018-01-01

Power control circuits are widely used in transceivers aiming at stabilizing the transmitted signal power to a specified value, thereby reducing power consumption and interference to other frequency bands. In order to overcome the shortcomings of traditional modes of power control, this paper proposes an accurate signal power detection method by multiplexing the receiver and realizes transmitting power control in the digital domain. The simulation results show that this novel digital power control approach has advantages of small delay, high precision and simplified design procedure. The proposed method is applicable to transceivers working at large frequency dynamic range, and has good engineering practicability.

An adaptive load-following control system for a space nuclear power system

NASA Astrophysics Data System (ADS)

Metzger, John D.; El-Genk, Mohamed S.

An adaptive load-following control system is proposed for a space nuclear power system. The conceptual design of the SP-100 space nuclear power system proposes operating the nuclear reactor at a base thermal power and accommodating changes in the electrical power demand with a shunt regulator. It is necessary to increase the reactor thermal power if the payload electrical demand exceeds the peak system electrical output for the associated reactor power. When it is necessary to change the nuclear reactor power to meet a change in the power demand, the power ascension or descension must be accomplished in a predetermined manner to avoid thermal stresses in the system and to achieve the desired reactor period. The load-following control system described has the ability to adapt to changes in the system and to changes in the satellite environment. The application is proposed of the model reference adaptive control (MRAC). The adaptive control system has the ability to control the dynamic response of nonlinear systems. Three basic subsets of adaptive control are: (1) gain scheduling, (2) self-tuning regulators, and (3) model reference adaptive control.

Study on emergency power control strategy for AC/DC hybrid power system containing VSC-HVDC

NASA Astrophysics Data System (ADS)

Liu, Lin; Hu, Zhenda; Ye, Rong; Lin, Zhangsui; Yang, Xiaodong; Yi, Yang

2018-04-01

This paper presents a comprehensive emergency power control strategy for AC/DC hybrid power systems containing VSC-HVDC. Firstly, the paper analyzes the power support of the VSC-HVDC to the AC lines using the Power Transferring Relativity Factor (PTRF). Then the power adjustment of the VSC-HVDC in several different circumstances are calculated. Finally, the online power control strategies of VSC-HVDC are designed, which could rapidly control the power of the VSC-HVDC, keeping the power flow of AC lines below the upper limit. Furthermore, the strategy is proven to be effective by the simulations with EMTDC/PSCAD.

Optimal Power Control in Wireless Powered Sensor Networks: A Dynamic Game-Based Approach

PubMed Central

Xu, Haitao; Guo, Chao; Zhang, Long

2017-01-01

In wireless powered sensor networks (WPSN), it is essential to research uplink transmit power control in order to achieve throughput performance balancing and energy scheduling. Each sensor should have an optimal transmit power level for revenue maximization. In this paper, we discuss a dynamic game-based algorithm for optimal power control in WPSN. The main idea is to use the non-cooperative differential game to control the uplink transmit power of wireless sensors in WPSN, to extend their working hours and to meet QoS (Quality of Services) requirements. Subsequently, the Nash equilibrium solutions are obtained through Bellman dynamic programming. At the same time, an uplink power control algorithm is proposed in a distributed manner. Through numerical simulations, we demonstrate that our algorithm can obtain optimal power control and reach convergence for an infinite horizon. PMID:28282945

Neuro-Fuzzy Computational Technique to Control Load Frequency in Hydro-Thermal Interconnected Power System

NASA Astrophysics Data System (ADS)

Prakash, S.; Sinha, S. K.

2015-09-01

In this research work, two areas hydro-thermal power system connected through tie-lines is considered. The perturbation of frequencies at the areas and resulting tie line power flows arise due to unpredictable load variations that cause mismatch between the generated and demanded powers. Due to rising and falling power demand, the real and reactive power balance is harmed; hence frequency and voltage get deviated from nominal value. This necessitates designing of an accurate and fast controller to maintain the system parameters at nominal value. The main purpose of system generation control is to balance the system generation against the load and losses so that the desired frequency and power interchange between neighboring systems are maintained. The intelligent controllers like fuzzy logic, artificial neural network (ANN) and hybrid fuzzy neural network approaches are used for automatic generation control for the two area interconnected power systems. Area 1 consists of thermal reheat power plant whereas area 2 consists of hydro power plant with electric governor. Performance evaluation is carried out by using intelligent (ANFIS, ANN and fuzzy) control and conventional PI and PID control approaches. To enhance the performance of controller sliding surface i.e. variable structure control is included. The model of interconnected power system has been developed with all five types of said controllers and simulated using MATLAB/SIMULINK package. The performance of the intelligent controllers has been compared with the conventional PI and PID controllers for the interconnected power system. A comparison of ANFIS, ANN, Fuzzy and PI, PID based approaches shows the superiority of proposed ANFIS over ANN, fuzzy and PI, PID. Thus the hybrid fuzzy neural network controller has better dynamic response i.e., quick in operation, reduced error magnitude and minimized frequency transients.

Wireless Power Control for Tactical MANET: Power Rate Bounds

DTIC Science & Technology

2016-09-01

signals and by their inherent interference.” Figure 1. Transmission and interference in a two-link wireless network. Wireless power control seeks to...e.g., shutting off transmissions to measure the interference is impractical.) In a wireless power control system, the receiver sets its transmitter’s...Travassos Ro- mano [2013] Transmission Power Control for Opportunistic QoS Provision in Wireless Networks, IEEE Transactions on Control Systems Technology

Performance and power regulation characteristics of two aileron-controlled rotors and a pitchable tip-controlled rotor on the Mod-O turbine

NASA Technical Reports Server (NTRS)

Corrigan, Robert D.; Ensworth, Clinton B. F., III; Miller, Dean R.

1987-01-01

Tests were conducted on the DOE/NASA mod-0 horizontal axis wind turbine to compare and evaluate the performance and the power regulation characteristics of two aileron-controlled rotors and a pitchable tip-controlled rotor. The two aileron-controlled rotor configurations used 20 and 38 percent chord ailerons, while the tip-controlled rotor had a pitchable blade tip. The ability of the control surfaces to regulate power was determined by measuring the change in power caused by an incremental change in the deflection angle of the control surface. The data shows that the change in power per degree of deflection angle for the tip-controlled rotor was four times the corresponding value for the 2- percent chord ailerons. The root mean square power deviation about a power setpoint was highest for the 20 percent chord aileron, and lowest for the 38 percent chord aileron.

Space station power management and distribution

NASA Technical Reports Server (NTRS)

Teren, F.

1985-01-01

The power system architecture is presented by a series of schematics which illustrate the power management and distribution (PMAD) system at the component level, including converters, controllers, switchgear, rotary power transfer devices, power and data cables, remote power controllers, and load converters. Power distribution options, reference power management, and control strategy are also outlined. A summary of advanced development status and plans and an overview of system test plans are presented.

Coordinated control of micro-grid based on distributed moving horizon control.

PubMed

Ma, Miaomiao; Shao, Liyang; Liu, Xiangjie

2018-05-01

This paper proposed the distributed moving horizon coordinated control scheme for the power balance and economic dispatch problems of micro-grid based on distributed generation. We design the power coordinated controller for each subsystem via moving horizon control by minimizing a suitable objective function. The objective function of distributed moving horizon coordinated controller is chosen based on the principle that wind power subsystem has the priority to generate electricity while photovoltaic power generation coordinates with wind power subsystem and the battery is only activated to meet the load demand when necessary. The simulation results illustrate that the proposed distributed moving horizon coordinated controller can allocate the output power of two generation subsystems reasonably under varying environment conditions, which not only can satisfy the load demand but also limit excessive fluctuations of output power to protect the power generation equipment. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Description of the SSF PMAD DC testbed control system data acquisition function

NASA Technical Reports Server (NTRS)

Baez, Anastacio N.; Mackin, Michael; Wright, Theodore

1992-01-01

The NASA LeRC in Cleveland, Ohio has completed the development and integration of a Power Management and Distribution (PMAD) DC Testbed. This testbed is a reduced scale representation of the end to end, sources to loads, Space Station Freedom Electrical Power System (SSF EPS). This unique facility is being used to demonstrate DC power generation and distribution, power management and control, and system operation techniques considered to be prime candidates for the Space Station Freedom. A key capability of the testbed is its ability to be configured to address system level issues in support of critical SSF program design milestones. Electrical power system control and operation issues like source control, source regulation, system fault protection, end-to-end system stability, health monitoring, resource allocation, and resource management are being evaluated in the testbed. The SSF EPS control functional allocation between on-board computers and ground based systems is evolving. Initially, ground based systems will perform the bulk of power system control and operation. The EPS control system is required to continuously monitor and determine the current state of the power system. The DC Testbed Control System consists of standard controllers arranged in a hierarchical and distributed architecture. These controllers provide all the monitoring and control functions for the DC Testbed Electrical Power System. Higher level controllers include the Power Management Controller, Load Management Controller, Operator Interface System, and a network of computer systems that perform some of the SSF Ground based Control Center Operation. The lower level controllers include Main Bus Switch Controllers and Photovoltaic Controllers. Power system status information is periodically provided to the higher level controllers to perform system control and operation. The data acquisition function of the control system is distributed among the various levels of the hierarchy. Data requirements are dictated by the control system algorithms being implemented at each level. A functional description of the various levels of the testbed control system architecture, the data acquisition function, and the status of its implementationis presented.

Power Smoothing and MPPT for Grid-connected Wind Power Generation with Doubly Fed Induction Generator

NASA Astrophysics Data System (ADS)

Kai, Takaaki; Tanaka, Yuji; Kaneda, Hirotoshi; Kobayashi, Daichi; Tanaka, Akio

Recently, doubly fed induction generator (DFIG) and synchronous generator are mostly applied for wind power generation, and variable speed control and power factor control are executed for high efficiently for wind energy capture and high quality for power system voltage. In variable speed control, a wind speed or a generator speed is used for maximum power point tracking. However, performances of a wind generation power fluctuation due to wind speed variation have not yet investigated for those controls. The authors discuss power smoothing by those controls for the DFIG inter-connected to 6.6kV distribution line. The performances are verified using power system simulation software PSCAD/EMTDC for actual wind speed data and are examined from an approximate equation of wind generation power fluctuation for wind speed variation.

Two-loop controller for maximizing performance of a grid-connected photovoltaic - fuel cell hybrid power plant

NASA Astrophysics Data System (ADS)

Ro, Kyoungsoo

The study started with the requirement that a photovoltaic (PV) power source should be integrated with other supplementary power sources whether it operates in a stand-alone or grid-connected mode. First, fuel cells for a backup of varying PV power were compared in detail with batteries and were found to have more operational benefits. Next, maximizing performance of a grid-connected PV-fuel cell hybrid system by use of a two-loop controller was discussed. One loop is a neural network controller for maximum power point tracking, which extracts maximum available solar power from PV arrays under varying conditions of insolation, temperature, and system load. A real/reactive power controller (RRPC) is the other loop. The RRPC meets the system's requirement for real and reactive powers by controlling incoming fuel to fuel cell stacks as well as switching control signals to a power conditioning subsystem. The RRPC is able to achieve more versatile control of real/reactive powers than the conventional power sources since the hybrid power plant does not contain any rotating mass. Results of time-domain simulations prove not only effectiveness of the proposed computer models of the two-loop controller, but also their applicability for use in transient stability analysis of the hybrid power plant. Finally, environmental evaluation of the proposed hybrid plant was made in terms of plant's land requirement and lifetime COsb2 emissions, and then compared with that of the conventional fossil-fuel power generating forms.

Smoothing Control of Wind Farm Output by Using Kinetic Energy of Variable Speed Wind Power Generators

NASA Astrophysics Data System (ADS)

Sato, Daiki; Saitoh, Hiroumi

This paper proposes a new control method for reducing fluctuation of power system frequency through smoothing active power output of wind farm. The proposal is based on the modulation of rotaional kinetic energy of variable speed wind power generators through power converters between permanent magnet synchronous generators (PMSG) and transmission lines. In this paper, the proposed control is called Fluctuation Absorption by Flywheel Characteristics control (FAFC). The FAFC can be easily implemented by adding wind farm output signal to Maximum Power Point Tracking control signal through a feedback control loop. In order to verify the effectiveness of the FAFC control, a simulation study was carried out. In the study, it was assumed that the wind farm consisting of PMSG type wind power generator and induction machine type wind power generaotors is connected with a power sysem. The results of the study show that the FAFC control is a useful method for reducing the impacts of wind farm output fluctuation on system frequency without additional devices such as secondary battery.

Computing an operating parameter of a unified power flow controller

DOEpatents

Wilson, David G.; Robinett, III, Rush D.

2017-12-26

A Unified Power Flow Controller described herein comprises a sensor that outputs at least one sensed condition, a processor that receives the at least one sensed condition, a memory that comprises control logic that is executable by the processor; and power electronics that comprise power storage, wherein the processor causes the power electronics to selectively cause the power storage to act as one of a power generator or a load based at least in part upon the at least one sensed condition output by the sensor and the control logic, and wherein at least one operating parameter of the power electronics is designed to facilitate maximal transmittal of electrical power generated at a variable power generation system to a grid system while meeting power constraints set forth by the electrical power grid.

Computing an operating parameter of a unified power flow controller

DOEpatents

Wilson, David G; Robinett, III, Rush D

2015-01-06

A Unified Power Flow Controller described herein comprises a sensor that outputs at least one sensed condition, a processor that receives the at least one sensed condition, a memory that comprises control logic that is executable by the processor; and power electronics that comprise power storage, wherein the processor causes the power electronics to selectively cause the power storage to act as one of a power generator or a load based at least in part upon the at least one sensed condition output by the sensor and the control logic, and wherein at least one operating parameter of the power electronics is designed to facilitate maximal transmittal of electrical power generated at a variable power generation system to a grid system while meeting power constraints set forth by the electrical power grid.

Power factor regulation for household usage

NASA Astrophysics Data System (ADS)

Daud, Nik Ghazali Nik; Hashim, Fakroul Ridzuan; Tarmizi, Muhammad Haziq Ahmad

2018-02-01

Power factor regulator technology has recently drawn attention to the consumer and to power generation company in order for consumers to use electricity efficiently. Controlling of power factor for efficient usage can reduce the production of power in fulfilment demands hence reducing the greenhouse effect. This paper presents the design method of power factor controller for household usage. There are several methods to improve the power factor. The power factor controller used by this method is by using capacitors. Total harmonic distortion also has become a major problem for the reliability of the electrical appliances and techniques to control it will be discussed.

Control system for high power laser drilling workover and completion unit

DOEpatents

Zediker, Mark S; Makki, Siamak; Faircloth, Brian O; DeWitt, Ronald A; Allen, Erik C; Underwood, Lance D

2015-05-12

A control and monitoring system controls and monitors a high power laser system for performing high power laser operations. The control and monitoring system is configured to perform high power laser operation on, and in, remote and difficult to access locations.

Load controller and method to enhance effective capacity of a photovoltaic power supply

DOEpatents

Perez, Richard

2000-01-01

A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply. The renewable supply may comprise, for example, a photovoltaic power supply or a wind-based power supply.

Experience in connecting the power generating units of thermal power plants to automatic secondary frequency regulation within the united power system of Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhukov, A. V.; Komarov, A. N.; Safronov, A. N.

The principles of central control of the power generating units of thermal power plants by automatic secondary frequency and active power overcurrent regulation systems, and the algorithms for interactions between automatic power control systems for the power production units in thermal power plants and centralized systems for automatic frequency and power regulation, are discussed. The order of switching the power generating units of thermal power plants over to control by a centralized system for automatic frequency and power regulation and by the Central Coordinating System for automatic frequency and power regulation is presented. The results of full-scale system tests ofmore » the control of power generating units of the Kirishskaya, Stavropol, and Perm GRES (State Regional Electric Power Plants) by the Central Coordinating System for automatic frequency and power regulation at the United Power System of Russia on September 23-25, 2008, are reported.« less

Real power regulation for the utility power grid via responsive loads

DOEpatents

McIntyre, Timothy J [Knoxville, TN; Kirby, Brendan J [Knoxville, TN; Kisner, Roger A

2009-05-19

A system for dynamically managing an electrical power system that determines measures of performance and control criteria for the electric power system, collects at least one automatic generation control (AGC) input parameter to at least one AGC module and at least one automatic load control (ALC) input parameter to at least one ALC module, calculates AGC control signals and loads as resources (LAR) control signals in response to said measures of performance and control criteria, propagates AGC control signals to power generating units in response to control logic in AGC modules, and propagates LAR control signals to at least one LAR in response to control logic in ALC modules.

Zero Power Non-Contact Suspension System with Permanent Magnet Motion Feedback

NASA Astrophysics Data System (ADS)

Sun, Feng; Oka, Koichi

This paper proposes a zero power control method for a permanent magnetic suspension system consisting mainly of a permanent magnet, an actuator, sensors, a suspended iron ball and a spring. A system using this zero power control method will consume quasi-zero power when the levitated object is suspended in an equilibrium state. To realize zero power control, a spring is installed in the magnetic suspension device to counterbalance the gravitational force on the actuator in the equilibrium position. In addition, an integral feedback loop in the controller affords zero actuator current when the device is in a balanced state. In this study, a model was set up for feasibility analysis, a prototype was manufactured for experimental confirmation, numerical simulations of zero power control with nonlinear attractive force were carried out based on the model, and experiments were completed to confirm the practicality of the prototype. The simulations and experiments were performed under varied conditions, such as without springs and without zero power control, with springs and without zero power control, with springs and with zero power control, using different springs and integral feedback gains. Some results are shown and analyzed in this paper. All results indicate that this zero power control method is feasible and effective for use in this suspension system with a permanent magnet motion feedback loop.

Power oscillation suppression by robust SMES in power system with large wind power penetration

NASA Astrophysics Data System (ADS)

Ngamroo, Issarachai; Cuk Supriyadi, A. N.; Dechanupaprittha, Sanchai; Mitani, Yasunori

2009-01-01

The large penetration of wind farm into interconnected power systems may cause the severe problem of tie-line power oscillations. To suppress power oscillations, the superconducting magnetic energy storage (SMES) which is able to control active and reactive powers simultaneously, can be applied. On the other hand, several generating and loading conditions, variation of system parameters, etc., cause uncertainties in the system. The SMES controller designed without considering system uncertainties may fail to suppress power oscillations. To enhance the robustness of SMES controller against system uncertainties, this paper proposes a robust control design of SMES by taking system uncertainties into account. The inverse additive perturbation is applied to represent the unstructured system uncertainties and included in power system modeling. The configuration of active and reactive power controllers is the first-order lead-lag compensator with single input feedback. To tune the controller parameters, the optimization problem is formulated based on the enhancement of robust stability margin. The particle swarm optimization is used to solve the problem and achieve the controller parameters. Simulation studies in the six-area interconnected power system with wind farms confirm the robustness of the proposed SMES under various operating conditions.

A Combined Energy Management Algorithm for Wind Turbine/Battery Hybrid System

NASA Astrophysics Data System (ADS)

Altin, Necmi; Eyimaya, Süleyman Emre

2018-03-01

From an energy management standpoint, natural phenomena such as solar irradiation and wind speed are uncontrolled variables, so the correlation between the energy generated by renewable energy sources and energy demand cannot always be predicted. For this reason, energy storage systems are used to provide more efficient renewable energy systems. In these systems, energy management systems are used to control the energy storage system and establish a balance between the generated power and the power demand. In addition, especially in wind turbines, rapidly varying wind speeds cause wind power fluctuations, which threaten the power system stability, especially at high power levels. Energy storage systems are also used to mitigate the power fluctuations and sustain the power system's stability. In these systems, another controller which controls the energy storage system power to mitigate power fluctuations is required. These two controllers are different from each other. In this study, a combined energy management algorithm is proposed which can perform both as an energy control system and a power fluctuation mitigation system. The proposed controller is tested with wind energy conversion system modeled in MATLAB/Simulink. Simulation results show that the proposed controller acts as an energy management system while, at the same time, mitigating power fluctuations.

An inverter/controller subsystem optimized for photovoltaic applications

NASA Technical Reports Server (NTRS)

Pickrell, R. L.; Osullivan, G.; Merrill, W. C.

1978-01-01

Conversion of solar array dc power to ac power stimulated the specification, design, and simulation testing of an inverter/controller subsystem tailored to the photovoltaic power source characteristics. Optimization of the inverter/controller design is discussed as part of an overall photovoltaic power system designed for maximum energy extraction from the solar array. The special design requirements for the inverter/ controller include: a power system controller (PSC) to control continuously the solar array operating point at the maximum power level based on variable solar insolation and cell temperatures; and an inverter designed for high efficiency at rated load and low losses at light loadings to conserve energy.

A Survey of Distributed Optimization and Control Algorithms for Electric Power Systems

DOE PAGES

Molzahn, Daniel K.; Dorfler, Florian K.; Sandberg, Henrik; ...

2017-07-25

Historically, centrally computed algorithms have been the primary means of power system optimization and control. With increasing penetrations of distributed energy resources requiring optimization and control of power systems with many controllable devices, distributed algorithms have been the subject of significant research interest. Here, this paper surveys the literature of distributed algorithms with applications to optimization and control of power systems. In particular, this paper reviews distributed algorithms for offline solution of optimal power flow (OPF) problems as well as online algorithms for real-time solution of OPF, optimal frequency control, optimal voltage control, and optimal wide-area control problems.

A Survey of Distributed Optimization and Control Algorithms for Electric Power Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molzahn, Daniel K.; Dorfler, Florian K.; Sandberg, Henrik

Historically, centrally computed algorithms have been the primary means of power system optimization and control. With increasing penetrations of distributed energy resources requiring optimization and control of power systems with many controllable devices, distributed algorithms have been the subject of significant research interest. Here, this paper surveys the literature of distributed algorithms with applications to optimization and control of power systems. In particular, this paper reviews distributed algorithms for offline solution of optimal power flow (OPF) problems as well as online algorithms for real-time solution of OPF, optimal frequency control, optimal voltage control, and optimal wide-area control problems.

A distributed control approach for power and energy management in a notional shipboard power system

NASA Astrophysics Data System (ADS)

Shen, Qunying

The main goal of this thesis is to present a power control module (PCON) based approach for power and energy management and to examine its control capability in shipboard power system (SPS). The proposed control scheme is implemented in a notional medium voltage direct current (MVDC) integrated power system (IPS) for electric ship. To realize the control functions such as ship mode selection, generator launch schedule, blackout monitoring, and fault ride-through, a PCON based distributed power and energy management system (PEMS) is developed. The control scheme is proposed as two-layer hierarchical architecture with system level on the top as the supervisory control and zonal level on the bottom as the decentralized control, which is based on the zonal distribution characteristic of the notional MVDC IPS that was proposed as one of the approaches for Next Generation Integrated Power System (NGIPS) by Norbert Doerry. Several types of modules with different functionalities are used to derive the control scheme in detail for the notional MVDC IPS. Those modules include the power generation module (PGM) that controls the function of generators, the power conversion module (PCM) that controls the functions of DC/DC or DC/AC converters, etc. Among them, the power control module (PCON) plays a critical role in the PEMS. It is the core of the control process. PCONs in the PEMS interact with all the other modules, such as power propulsion module (PPM), energy storage module (ESM), load shedding module (LSHED), and human machine interface (HMI) to realize the control algorithm in PEMS. The proposed control scheme is implemented in real time using the real time digital simulator (RTDS) to verify its validity. To achieve this, a system level energy storage module (SESM) and a zonal level energy storage module (ZESM) are developed in RTDS to cooperate with PCONs to realize the control functionalities. In addition, a load shedding module which takes into account the reliability of power supply (in terms of quality of service) is developed. This module can supply uninterruptible power to the mission critical loads. In addition, a multi-agent system (MAS) based framework is proposed to implement the PCON based PEMS through a hardware setup that is composed of MAMBA boards and FPGA interface. Agents are implemented using Java Agent DEvelopment Framework (JADE). Various test scenarios were tested to validate the approach.

A process for providing positive primary control power by wind turbines

NASA Astrophysics Data System (ADS)

Marschner, V.; Michael, J.; Liersch, J.

2014-12-01

Due to the increasing share of wind energy in electricity generation, wind turbines have to fulfil additional requirements in the context of grid integration. The paper examines to which extent wind turbines can provide positive control power following the related grid code. The additional power has to be obtained from the rotating flywheel mass of the wind turbine's rotor. A simple physical model is developed that allows to draw conclusions about appropriate concepts by means of a dynamic simulation of the variables rotational speed, torque, power output and rotor power. The paper discusses scenarios to provide control power. The supply of control power at partial load is examined in detail using simulations. Under partial load conditions control power can be fed into the grid for a short time. Thereby the rotational speed drops so that aerodynamic efficiency decreases and feed-in power is below the initial value after the control process. In this way an unfavourable situation for the grid control is produced, therefore the paper proposes a modified partial load condition with a higher rotational speed. By providing primary control power the rotor is delayed to the optimum rotational speed so that more rotational energy can be fed in and fed-in power can be increased persistently. However, as the rotor does not operate at optimum speed, a small amount of the energy yield is lost. Finally, the paper shows that a wind farm can combine these two concepts: A part of the wind turbines work under modified partial load conditions can compensate the decrease of power of the wind turbines working under partial load conditions. Therefore the requested control power is provided and afterwards the original value of power is maintained.

Frontiers in Distributed Optimization and Control of Sustainable Power

Science.gov Websites

Optimization and Control of Sustainable Power Systems Workshop Frontiers in Distributed Optimization and Control of Sustainable Power Systems Workshop In January 2016, NREL's energy systems integration team hosted a workshop on frontiers in distributed optimization and control of sustainable power systems. The

Voltage Controller

NASA Technical Reports Server (NTRS)

1997-01-01

Power Efficiency Corporation, specifically formed to manufacture and develop products from NASA technology, has a license to a three-phase power factor controller originally developed by Frank Nola, an engineer at Marshall Space Flight Center. Power Efficiency and two major distributors, Performance Control and Edison Power Technologies, use the electronic control boards to assemble three different motor controllers: Power Commander, Performance Controller, and Energy Master. The company Power Factor Controller reduces excessive energy waste in AC induction motors. It is used in industries and applications where motors operate under variable loads, including elevators and escalators, machine tools, intake and exhaust fans, oil wells, conveyors, pumps, die casting, and compressors. Customer lists include companies such as May Department Stores, Caesars Atlantic City, Ford Motors, and American Axle.

Power system

DOEpatents

Hickam, Christopher Dale [Glasford, IL

2008-03-18

A power system includes a prime mover, a transmission, and a fluid coupler having a selectively engageable lockup clutch. The fluid coupler may be drivingly connected between the prime mover and the transmission. Additionally, the power system may include a motor/generator drivingly connected to at least one of the prime mover and the transmission. The power-system may also include power-system controls configured to execute a control method. The control method may include selecting one of a plurality of modes of operation of the power system. Additionally, the control method may include controlling the operating state of the lockup clutch dependent upon the mode of operation selected. The control method may also include controlling the operating state of the motor/generator dependent upon the mode of operation selected.

Power Saving Control for Battery-Powered Portable WLAN APs

NASA Astrophysics Data System (ADS)

Ogawa, Masakatsu; Hiraguri, Takefumi

This paper proposes a power saving control function for battery-powered portable wireless LAN (WLAN) access points (APs) to extend the battery life. The IEEE802.11 standard does not support power saving control for APs. To enable a sleep state for an AP, the AP forces the stations (STAs) to refrain from transmitting frames using the network allocation vector (NAV) while the AP is sleeping. Thus the sleep state for the AP can be employed without causing frame loss at the STAs. Numerical analysis and computer simulation reveal that the newly proposed control technique conserves power compared to the conventional control.

Evaluation of high-voltage, high-power, solid-state remote power controllers for amps

NASA Technical Reports Server (NTRS)

Callis, Charles P.

1987-01-01

The Electrical Power Branch at Marshall Space Flight Center has a Power System Development Facility where various power circuit breadboards are tested and evaluated. This project relates to the evaluation of a particular remote power controller (RPC) energizing high power loads. The Facility equipment permits the thorough testing and evaluation of high-voltage, high-power solid-state remote power controllers. The purpose is to evaluate a Type E, 30 Ampere, 200 V dc remote power controller. Three phases of the RPC evaluation are presented. The RPC is evaluated within a low-voltage, low-power circuit to check its operational capability. The RPC is then evaluated while performing switch/circuit breaker functions within a 200 V dc, 30 Ampere power circuit. The final effort of the project relates to the recommended procedures for installing these RPC's into the existing Autonomously Managed Power System (AMPS) breadboard/test facility at MSFC.

Improved Controllers For Heaters In Toxic-Gas Combustors

NASA Technical Reports Server (NTRS)

Wishard, James; Lamb, James; Fortier, Edward; Velasquez, Hugo; Waltman, Doug

1995-01-01

Commercial electronic proportional controllers installed in place of mechanical power controllers for electric heaters in toxic-gas combustors at NASA's Jet Propulsion Laboratory. Designed to maintain temperature of heater at preset value by turning power fully on or fully off when temperature falls below or rises above that value, respectively. Solid-state power controllers overcome deficiencies of mechanical power controllers.

Instantaneous power control of a high speed permanent magnet synchronous generator based on a sliding mode observer and a phase locked loop

NASA Astrophysics Data System (ADS)

Duan, Jiandong; Fan, Shaogui; Wu, Fengjiang; Sun, Li; Wang, Guanglin

2018-06-01

This paper proposes an instantaneous power control method for high speed permanent magnet synchronous generators (PMSG), to realize the decoupled control of active power and reactive power, through vector control based on a sliding mode observer (SMO), and a phase locked loop (PLL). Consequently, the high speed PMSG has a high internal power factor, to ensure efficient operation. Vector control and accurate estimation of the instantaneous power require an accurate estimate of the rotor position. The SMO is able to estimate the back electromotive force (EMF). The rotor position and speed can be obtained using a combination of the PLL technique and the phase compensation method. This method has the advantages of robust operation, and being resistant to noise when estimating the position of the rotor. Using instantaneous power theory, the relationship between the output active power, reactive power, and stator current of the PMSG is deduced, and the power constraint condition is analysed for operation at the unit internal power factor. Finally, the accuracy of the rotor position detection, the instantaneous power detection, and the control methods are verified using simulations and experiments.

Adaptive Q–V Scheme for the Voltage Control of a DFIG-Based Wind Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jinho; Seok, Jul-Ki; Muljadi, Eduard

Wind generators within a wind power plant (WPP) will produce different amounts of active power because of the wake effect, and therefore, they have different reactive power capabilities. This paper proposes an adaptive reactive power to the voltage (Q-V) scheme for the voltage control of a doubly fed induction generator (DFIG)-based WPP. In the proposed scheme, the WPP controller uses a voltage control mode and sends a voltage error signal to each DFIG. The DFIG controller also employs a voltage control mode utilizing the adaptive Q-V characteristics depending on the reactive power capability such that a DFIG with a largermore » reactive power capability will inject more reactive power to ensure fast voltage recovery. Test results indicate that the proposed scheme can recover the voltage within a short time, even for a grid fault with a small short-circuit ratio, by making use of the available reactive power of a WPP and differentiating the reactive power injection in proportion to the reactive power capability. This will, therefore, help to reduce the additional reactive power and ensure fast voltage recovery.« less

Provider perspectives on drug-resistant tuberculosis and human immunodeficiency virus care in South Africa: a qualitative case study.

PubMed

Daftary, A; Padayatchi, N

2016-11-01

To examine influences on health care workers' (HCWs') capacity to deliver health care for multi- and/or extensively drug-resistant tuberculosis (MDR/XDR-TB) and human immunodeficiency virus (HIV) infection in South Africa. Qualitative data were collected via group and individual interviews with a purposive sample of 17 HCWs at a centralised, tertiary TB facility and analysed using grounded theory. Four themes were identified: 1) personal infection control practices among HCWs may be weakened by a workplace culture comprising low motivation, disparate risk perceptions and practices across workforce hierarchies, physical discomfort, and problems managing patients with treatment-induced hearing loss. 2) Patient-provider interactions are likely stronger among nurses, and in HIV vs. MDR/XDR-TB service delivery, due to greater attention to patient empowerment and support. Stigma associated with MDR/XDR-TB, considered worse than HIV, may be perpetuated within non-specialised facilities less familiar with MDR/XDR-TB. 3) HCWs who struggle with the daily tedium of MDR/XDR-TB treatment supervision are becoming increasingly supportive of treatment literacy and self-administration. 4) Effective integration of HIV and MDR/XDR-TB services may be impeded by administrative restrictions, workplace norms and provider mindsets. Comprehensive, decentralised management of MDR/XDR-TB and HIV coinfection requires the creation of patient-provider trust and treatment literacy in MDR/XDR-TB programmes, and defying workplace norms that could provoke nosocomial TB exposure and fragmented service provision.

Power factor improvement in three-phase networks with unbalanced inductive loads using the Roederstein ESTAmat RPR power factor controller

NASA Astrophysics Data System (ADS)

Diniş, C. M.; Cunţan, C. D.; Rob, R. O. S.; Popa, G. N.

2018-01-01

The paper presents the analysis of a power factor with capacitors banks, without series coils, used for improving power factor for a three-phase and single-phase inductive loads. In the experimental measurements, to improve the power factor, the Roederstein ESTAmat RPR power factor controller can command up to twelve capacitors banks, while experimenting using only six capacitors banks. Six delta capacitors banks with approximately equal reactive powers were used for experimentation. The experimental measurements were carried out with a three-phase power quality analyser which worked in three cases: a case without a controller with all capacitors banks permanently parallel connected with network, and two other cases with power factor controller (one with setting power factor at 0.92 and the other one at 1). When performing experiments with the power factor controller, a current transformer was used to measure the current on one phase (at a more charged or less loaded phase).

Effect of personalised citizen assistance for social participation (APIC) on older adults’ health and social participation: study protocol for a pragmatic multicentre randomised controlled trial (RCT)

PubMed Central

Levasseur, Mélanie; Dubois, Marie-France; Filliatrault, Johanne; Vasiliadis, Helen-Maria; Lacasse-Bédard, Joanie; Tourigny, André; Levert, Marie-Josée; Gabaude, Catherine; Lefebvre, Hélène; Berger, Valérie; Eymard, Chantal

2018-01-01

Introduction The challenges of global ageing and the growing burden of chronic diseases require innovative interventions acting on health determinants like social participation. Many older adults do not have equitable opportunities to achieve full social participation, and interventions might underempower their personal and environmental resources and only reach a minority. To optimise current practices, the Accompagnement-citoyen Personnalisé d’Intégration Communautaire (APIC), an intervention demonstrated as being feasible and having positive impacts, needs further evaluation. Methods and analysis A pragmatic multicentre, prospective, two-armed, randomised controlled trial will evaluate: (1) the short-term and long-term effects of the APIC on older adults’ health, social participation, life satisfaction and healthcare services utilisation and (2) its cost-effectiveness. A total of 376 participants restricted in at least one instrumental activity of daily living and living in three large cities in the province of Quebec, Canada, will be randomly assigned to the experimental or control group using a centralised computer-generated random number sequence procedure. The experimental group will receive weekly 3-hour personalised stimulation sessions given by a trained volunteer over the first 12 months. Sessions will encourage empowerment, gradual mobilisation of personal and environmental resources and community integration. The control group will receive the publicly funded universal healthcare services available to all Quebecers. Over 2 years (baseline and 12, 18 and 24 months later), self-administered questionnaires will assess physical and mental health (primary outcome; version 2 of the 36-item Short-Form Health Survey, converted to SF-6D utility scores for quality-adjusted life years), social participation (Social Participation Scale) and life satisfaction (Life Satisfaction Index-Z). Healthcare services utilisation will be recorded and costs of each intervention calculated. Ethics and dissemination The Research Ethics Committee of the CIUSSS Estrie – CHUS has approved the study (MP-31-2018-2424). An informed consent form will be read and signed by all study participants. Findings will be published and presented at conferences. Trial registration number NCT03161860; Pre-results. PMID:29605819

Alternative Fuels Data Center: Students Power Remote-Controlled Cars With

Science.gov Websites

Biodiesel Students Power Remote-Controlled Cars With Biodiesel to someone by E-mail Share Alternative Fuels Data Center: Students Power Remote-Controlled Cars With Biodiesel on Facebook Tweet about Alternative Fuels Data Center: Students Power Remote-Controlled Cars With Biodiesel on Twitter Bookmark

Automotive Stirling engine system component review

NASA Technical Reports Server (NTRS)

Hindes, Chip; Stotts, Robert

1987-01-01

The design and testing of the power and combustion control system for the basic Stirling engine, Mod II, are examined. The power control system is concerned with transparent operation, and the Mod II uses engine working gas pressure variation to control the power output of the engine. The main components of the power control system, the power control valve, the pump-down system, and the hydrogen stable system, are described. The combustion control system consists of a combustion air supply system and an air/fuel ratio control system, and the system is to maintain constant heater head temperature, and to maximize combustion efficiency and to minimize exhaust emissions.

Development of Real Time Implementation of 5/5 Rule based Fuzzy Logic Controller Shunt Active Power Filter for Power Quality Improvement

NASA Astrophysics Data System (ADS)

Puhan, Pratap Sekhar; Ray, Pravat Kumar; Panda, Gayadhar

2016-12-01

This paper presents the effectiveness of 5/5 Fuzzy rule implementation in Fuzzy Logic Controller conjunction with indirect control technique to enhance the power quality in single phase system, An indirect current controller in conjunction with Fuzzy Logic Controller is applied to the proposed shunt active power filter to estimate the peak reference current and capacitor voltage. Current Controller based pulse width modulation (CCPWM) is used to generate the switching signals of voltage source inverter. Various simulation results are presented to verify the good behaviour of the Shunt active Power Filter (SAPF) with proposed two levels Hysteresis Current Controller (HCC). For verification of Shunt Active Power Filter in real time, the proposed control algorithm has been implemented in laboratory developed setup in dSPACE platform.

Social networks in primates: smart and tolerant species have more efficient networks.

PubMed

Pasquaretta, Cristian; Levé, Marine; Claidière, Nicolas; van de Waal, Erica; Whiten, Andrew; MacIntosh, Andrew J J; Pelé, Marie; Bergstrom, Mackenzie L; Borgeaud, Christèle; Brosnan, Sarah F; Crofoot, Margaret C; Fedigan, Linda M; Fichtel, Claudia; Hopper, Lydia M; Mareno, Mary Catherine; Petit, Odile; Schnoell, Anna Viktoria; di Sorrentino, Eugenia Polizzi; Thierry, Bernard; Tiddi, Barbara; Sueur, Cédric

2014-12-23

Network optimality has been described in genes, proteins and human communicative networks. In the latter, optimality leads to the efficient transmission of information with a minimum number of connections. Whilst studies show that differences in centrality exist in animal networks with central individuals having higher fitness, network efficiency has never been studied in animal groups. Here we studied 78 groups of primates (24 species). We found that group size and neocortex ratio were correlated with network efficiency. Centralisation (whether several individuals are central in the group) and modularity (how a group is clustered) had opposing effects on network efficiency, showing that tolerant species have more efficient networks. Such network properties affecting individual fitness could be shaped by natural selection. Our results are in accordance with the social brain and cultural intelligence hypotheses, which suggest that the importance of network efficiency and information flow through social learning relates to cognitive abilities.

Social networks in primates: smart and tolerant species have more efficient networks

PubMed Central

Pasquaretta, Cristian; Levé, Marine; Claidière, Nicolas; van de Waal, Erica; Whiten, Andrew; MacIntosh, Andrew J. J.; Pelé, Marie; Bergstrom, Mackenzie L.; Borgeaud, Christèle; Brosnan, Sarah F.; Crofoot, Margaret C.; Fedigan, Linda M.; Fichtel, Claudia; Hopper, Lydia M.; Mareno, Mary Catherine; Petit, Odile; Schnoell, Anna Viktoria; di Sorrentino, Eugenia Polizzi; Thierry, Bernard; Tiddi, Barbara; Sueur, Cédric

2014-01-01

Network optimality has been described in genes, proteins and human communicative networks. In the latter, optimality leads to the efficient transmission of information with a minimum number of connections. Whilst studies show that differences in centrality exist in animal networks with central individuals having higher fitness, network efficiency has never been studied in animal groups. Here we studied 78 groups of primates (24 species). We found that group size and neocortex ratio were correlated with network efficiency. Centralisation (whether several individuals are central in the group) and modularity (how a group is clustered) had opposing effects on network efficiency, showing that tolerant species have more efficient networks. Such network properties affecting individual fitness could be shaped by natural selection. Our results are in accordance with the social brain and cultural intelligence hypotheses, which suggest that the importance of network efficiency and information flow through social learning relates to cognitive abilities. PMID:25534964

Decisional Information System for Safety (D.I.S.S.) Dedicated to the Human Space Exploration Mission

NASA Astrophysics Data System (ADS)

Grès, Stéphane; Guyonnet, Jean-François

2006-06-01

At the heart of the issue of reliable and dependable systems and networks, this paper presents the conception of a Decisional Information System for Security (D.I.S.S.) dedicated to the Human Space Exploration Mission. The objective is to conceive a decisional information system for human long duration space flight (> 1000 days) which is realised in entire autonomy in the solar system. This article describes the importance of the epistemological and ontological context for designing an open, self-learning and reliable system able for self-adapt in dangerous and unforeseen situations. We present in link with our research, the limits of the empirical analytical paradigm and several paths of research lead by the nascent paradigm of enaction. The strong presumption is that the centralised models of security could not be sufficient today to respond and challenge the security of a technical system, which will support human exploration missions.

Introducing the Brassica Information Portal: Towards integrating genotypic and phenotypic Brassica crop data

PubMed Central

Eckes, Annemarie H.; Gubała, Tomasz; Nowakowski, Piotr; Szymczyszyn, Tomasz; Wells, Rachel; Irwin, Judith A.; Horro, Carlos; Hancock, John M.; King, Graham; Dyer, Sarah C.; Jurkowski, Wiktor

2017-01-01

The Brassica Information Portal (BIP) is a centralised repository for brassica phenotypic data. The site hosts trait data associated with brassica research and breeding experiments conducted on brassica crops, that are used as oilseeds, vegetables, livestock forage and fodder and for biofuels. A key feature is the explicit management of meta-data describing the provenance and relationships between experimental plant materials, as well as trial design and trait descriptors. BIP is an open access and open source project, built on the schema of CropStoreDB, and as such can provide trait data management strategies for any crop data. A new user interface and programmatic submission/retrieval system helps to simplify data access for researchers, breeders and other end-users. BIP opens up the opportunity to apply integrative, cross-project analyses to data generated by the Brassica Research Community. Here, we present a short description of the current status of the repository. PMID:28529710

Situs ambiguous in a schoolchild

PubMed Central

Tortajada, Miguel; Moreno, Miriam; Gracia, Miguel; Sanchis, Amparo

2010-01-01

We report the case of a 9-year-old child with asthma, atopic dermatitis and allergic rhinoconjunctivitis due to house dust mites, in whom a routine chest x-ray identified by chance abnormal organ position, such as the stomach located on the right side. Abdominal ultrasonography indicated a centralised liver, with polysplenia on the right side and an inferior cava vein located to the left of the aorta with no interruption. Ultrasonography did not show heart defects. Magnetic resonance imaging (MRI) of the abdomen was performed that showed a short pancreas, with no neck, body and tail in it, and a left inferior vena cava with normal outlet of the renal veins, and absence of the intrahepatic part of the inferior vena cava, that was replaced by the left hemiazygos vein. Spinal cord MRI revealed dorsal syringomelia. In view of the results obtained, the diagnosis of situs ambiguous was established. PMID:22121394

Radiopharmaceuticals 1994. Nil desperandum. European Association of Nuclear Medicine Committees on Radiopharmaceuticals and Positron Emission Tomography.

PubMed

Cox, P H; Meyer, G J

1995-06-01

On the basis of the discussions at a symposium held in Düsseldorf and attended by representatives of various interested bodies, European legislation as it affects radiopharmaceuticals is reviewed. Due consideration is given to the new, centralised and decentralised, registration procedures, effective since 1 January 1995. The dossier required to support an application for marketing authorisation is discussed, separate consideration being given to single-photon emitters, therapeutic radio-nuclides and positron-emitting radiopharmaceuticals. The role of the European Pharmacopoiea is also considered. It is concluded that the new, modified procedures for the registration of medicinal products in the European Union may actually inhibit free availability of radio-pharmaceuticals within the Community, and that there is a strong case for modification of the European Directives so that radiopharmaceuticals are placed in a separate category to therapeutic drugs, with less stringent registration requirements.

The future of UK/Irish surgery: A European solution.

PubMed

Varzgalis, M; Kerin, M J; Sweeney, K J

2015-11-01

The United Kingdom (UK) and Republic of Ireland (ROI) hospital systems are dependent on junior doctors for their functionality however it is increasingly difficult to recruit UK/ROI trained doctors to fill these posts. Directive 2005/36/EC, which came into force in 2007, is the principal European legislation on the recognition of equivalence of professional qualifications across Europe. European trained doctors are therefore attractive candidates for junior doctor posts. However, although their training is recognised as equivalent by the Irish Medical Council (IMC) and General Medical Council (GMC) they are not being appointed to equivalent posts by the Health Service Executive (HSE) or National Health Service (NHS). With the influence of European Union (EU) centralisation, modification of UK/ROI consultant grade is imminent, possibly to pyramidal structure of the Continental European model with clearer lines of corporate responsibility. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Multivariate Spatial Condition Mapping Using Subtractive Fuzzy Cluster Means

PubMed Central

Sabit, Hakilo; Al-Anbuky, Adnan

2014-01-01

Wireless sensor networks are usually deployed for monitoring given physical phenomena taking place in a specific space and over a specific duration of time. The spatio-temporal distribution of these phenomena often correlates to certain physical events. To appropriately characterise these events-phenomena relationships over a given space for a given time frame, we require continuous monitoring of the conditions. WSNs are perfectly suited for these tasks, due to their inherent robustness. This paper presents a subtractive fuzzy cluster means algorithm and its application in data stream mining for wireless sensor systems over a cloud-computing-like architecture, which we call sensor cloud data stream mining. Benchmarking on standard mining algorithms, the k-means and the FCM algorithms, we have demonstrated that the subtractive fuzzy cluster means model can perform high quality distributed data stream mining tasks comparable to centralised data stream mining. PMID:25313495

Representations of people with dementia - subaltern, person, citizen.

PubMed

Gilmour, Jean A; Brannelly, Tula

2010-09-01

This study traces shifts in health professional representations of people with dementia. The concepts of subaltern, personhood and citizenship are used to draw attention to issues around visibility, voice and inclusion. Professional discourses and practices draw upon, and are shaped by historical and contemporary representations. Until recently, people with dementia were subaltern in nursing and medical discourses; marginalised and silenced. The incorporation of contemporary representations foregrounding personhood and citizenship into health professional accounts provide space for transformative styles of care. Privileging personhood centralises the person with dementia in social networks, focusing on their experiences and relationships. Respecting citizenship involves challenging discrimination and stigma: nursing from a rights-based approach necessitates listening and being responsive to the needs of the person with dementia. Incorporating contemporary representations in health professional practice requires the discarding of the historically dominant elite and authoritarian accounts of dementia still apparent in some nursing texts along with, perhaps, the historically burdened term of dementia itself.

ALK evaluation in the world of multiplex testing: Network Genomic Medicine (NGM): the Cologne model for implementing personalised oncology.

PubMed

Heydt, C; Kostenko, A; Merkelbach-Bruse, S; Wolf, J; Büttner, R

2016-09-01

Comprehensive molecular genotyping of lung cancers has become a key requirement for guiding therapeutic decisions. As a paradigm model of implementing next-generation comprehensive diagnostics, Network Genomic Medicine (NGM) has established central diagnostic and clinical trial platforms for centralised testing and decentralised personalised treatment in clinical practice. Here, we describe the structures of the NGM network and give a summary of technologies to identify patients with anaplastic lymphoma kinase (ALK) fusion-positive lung adenocarcinomas. As unifying test platforms will become increasingly important for delivering reliable, quick and affordable tests, the NGM diagnostic platform is currently implementing a comprehensive hybrid capture-based parallel sequencing pan-cancer assay. © The Author 2016. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Two-echelon competitive integrated supply chain model with price and credit period dependent demand

NASA Astrophysics Data System (ADS)

Pal, Brojeswar; Sankar Sana, Shib; Chaudhuri, Kripasindhu

2016-04-01

This study considers a two-echelon competitive supply chain consisting of two rivaling retailers and one common supplier with trade credit policy. The retailers hope that they can enhance their market demand by offering a credit period to the customers and the supplier also offers a credit period to the retailers. We assume that the market demand of the products of one retailer depends not only on their own market price and offering a credit period to the customers, but also on the market price and offering a credit period of the other retailer. The supplier supplies the product with a common wholesale price and offers the same credit period to the retailers. We study the model under a centralised (integrated) case and a decentralised (Vertical Nash) case and compare them numerically. Finally, we investigate the model by the collected numerical data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unalan, Dilek, E-mail: unaland@cf.ac.u; Cowell, Richard

This paper analyses the adoption of the EU Strategic Environmental Assessment Directive (2001/42/EC) in Turkey as part of a programme of environmental policy harmonisation for EU accession, to explore the extent to which this is driving wider shifts in modes of environmental governance. To do this, rather than simply assess compliance with Directive in narrow, formal, statutory terms, we use Jaenicke and Weidner's concept of capacity building, which focuses on the constraints facing societal action to promote sustainable development. Despite the resources invested in pre-accession training and pilot SEA projects, Turkey's adoption of the Directive is still likely to bemore » affected by the centralised nature of the bureaucracy (affecting the scope for sectoral integration), its politicised nature (interrupting the accumulation of policy learning), the limited capacity of civil society and environmental organisations to engage with the process, and the political dominance of economic development objectives.« less

Next Generation Monitoring: Tier 2 Experience

NASA Astrophysics Data System (ADS)

Fay, R.; Bland, J.; Jones, S.

2017-10-01

Monitoring IT infrastructure is essential for maximizing availability and minimizing disruption by detecting failures and developing issues. The HEP group at Liverpool have recently updated our monitoring infrastructure with the goal of increasing coverage, improving visualization capabilities, and streamlining configuration and maintenance. Here we present a summary of Liverpool’s experience, the monitoring infrastructure, and the tools used to build it. In brief, system checks are configured in Puppet using Hiera, and managed by Sensu, replacing Nagios. Centralised logging is managed with Elasticsearch, together with Logstash and Filebeat. Kibana provides an interface for interactive analysis, including visualization and dashboards. Metric collection is also configured in Puppet, managed by collectd and stored in Graphite, with Grafana providing a visualization and dashboard tool. The Uchiwa dashboard for Sensu provides a web interface for viewing infrastructure status. Alert capabilities are provided via external handlers. A custom alert handler is in development to provide an easily configurable, extensible and maintainable alert facility.

Control of large wind turbine generators connected to utility networks

NASA Technical Reports Server (NTRS)

Hinrichsen, E. N.

1983-01-01

This is an investigation of the control requirements for variable pitch wind turbine generators connected to electric power systems. The requirements include operation in very small as well as very large power systems. Control systems are developed for wind turbines with synchronous, induction, and doubly fed generators. Simulation results are presented. It is shown how wind turbines and power system controls can be integrated. A clear distinction is made between fast control of turbine torque, which is a peculiarity of wind turbines, and slow control of electric power, which is a traditional power system requirement.

An inverter/controller subsystem optimized for photovoltaic applications

NASA Technical Reports Server (NTRS)

Pickrell, R. L.; Merrill, W. C.; Osullivan, G.

1978-01-01

Conversion of solar array dc power to ac power stimulated the specification, design, and simulation testing of an inverter/controller subsystem tailored to the photovoltaic power source characteristics. This paper discusses the optimization of the inverter/controller design as part of an overall Photovoltaic Power System (PPS) designed for maximum energy extraction from the solar array. The special design requirements for the inverter/controller include: (1) a power system controller (PSC) to control continuously the solar array operating point at the maximum power level based on variable solar insolation and cell temperatures; and (2) an inverter designed for high efficiency at rated load and low losses at light loadings to conserve energy. It must be capable of operating connected to the utility line at a level set by an external controller (PSC).

Control circuit maintains unity power factor of reactive load

NASA Technical Reports Server (NTRS)

Kramer, M.; Martinage, L. H.

1966-01-01

Circuit including feedback control elements automatically corrects the power factor of a reactive load. It maintains power supply efficiency where negative load reactance changes and varies by providing corrective error signals to the control windings of a power supply transformer.

Commercialization of the power factor controller

NASA Technical Reports Server (NTRS)

1981-01-01

The purpose of the Motor Power Controller, also known as the Power Factor Controller, is to improve power factor and reduce power dissipation in induction motors operating below full load. These purposes were studied and tested in detail. The Motor Power Controller is capable of raising power factors from 0.2 to 0.8 and results in energy savings. It was found that many motors, in their present operating applications, are classified as unstable. The electronic nature of the controller vs. the electrical nature of the motor, compound this problem due to the differences in response time of the two devices. Many tests were successfully completed, the most indicating greater savings than anticipated. Also, there was an effect on efficiency which was not included in the calculations.

Magnetically Controlled Variable Transformer

NASA Technical Reports Server (NTRS)

Kleiner, Charles T.

1994-01-01

Improved variable-transformer circuit, output voltage and current of which controlled by use of relatively small current supplied at relatively low power to control windings on its magnetic cores. Transformer circuits of this type called "magnetic amplifiers" because ratio between controlled output power and power driving control current of such circuit large. This ratio - power gain - can be as large as 100 in present circuit. Variable-transformer circuit offers advantages of efficiency, safety, and controllability over some prior variable-transformer circuits.

49 CFR 238.447 - Train operator's controls and power car cab layout.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Train operator's controls and power car cab layout... Specific Requirements for Tier II Passenger Equipment § 238.447 Train operator's controls and power car cab layout. (a) Train operator controls in the power car cab shall be arranged so as to minimize the chance...

49 CFR 238.447 - Train operator's controls and power car cab layout.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Train operator's controls and power car cab layout... Specific Requirements for Tier II Passenger Equipment § 238.447 Train operator's controls and power car cab layout. (a) Train operator controls in the power car cab shall be arranged so as to minimize the chance...

Automatic Frequency Controller for Power Amplifiers Used in Bio-Implanted Applications: Issues and Challenges

PubMed Central

Hannan, Mahammad A.; Hussein, Hussein A.; Mutashar, Saad; Samad, Salina A.; Hussain, Aini

2014-01-01

With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemakers, cochlear implants, retinal implants and so on. The inductive coupling link is used to transmit power and data between the primary and secondary sides of the biomedical implanted system, in which efficient power amplifier is very much needed to ensure the best data transmission rates and low power losses. However, the efficiency of the implanted devices depends on the circuit design, controller, load variation, changes of radio frequency coil's mutual displacement and coupling coefficients. This paper provides a comprehensive survey on various power amplifier classes and their characteristics, efficiency and controller techniques that have been used in bio-implants. The automatic frequency controller used in biomedical implants such as gate drive switching control, closed loop power control, voltage controlled oscillator, capacitor control and microcontroller frequency control have been explained. Most of these techniques keep the resonance frequency stable in transcutaneous power transfer between the external coil and the coil implanted inside the body. Detailed information including carrier frequency, power efficiency, coils displacement, power consumption, supplied voltage and CMOS chip for the controllers techniques are investigated and summarized in the provided tables. From the rigorous review, it is observed that the existing automatic frequency controller technologies are more or less can capable of performing well in the implant devices; however, the systems are still not up to the mark. Accordingly, current challenges and problems of the typical automatic frequency controller techniques for power amplifiers are illustrated, with a brief suggestions and discussion section concerning the progress of implanted device research in the future. This review will hopefully lead to increasing efforts towards the development of low powered, highly efficient, high data rate and reliable automatic frequency controllers for implanted devices. PMID:25615728

Microprocessor control of multiple peak power tracking DC/DC converters for use with solar cell arrays

NASA Technical Reports Server (NTRS)

Frederick, Martin E. (Inventor); Jermakian, Joel (Inventor)

1991-01-01

A method and an apparatus is provided for efficiently controlling the power output of a solar cell array string or a plurality of solar cell array strings to achieve a maximum amount of output power from the strings under varying conditions of use. Maximum power output from a solar array string is achieved through control of a pulse width modulated DC/DC buck converter which transfers power from a solar array to a load or battery bus. The input voltage from the solar array to the converter is controlled by a pulse width modulation duty cycle, which in turn is controlled by a differential signal controller. By periodically adjusting the control voltage up or down by a small amount and comparing the power on the load or bus with that generated at different voltage values a maximum power output voltage may be obtained. The system is totally modular and additional solar array strings may be added to the system simply by adding converter boards to the system and changing some constants in the controller's control routines.

Load controller and method to enhance effective capacity of a photovoltaic power supply using a dynamically determined expected peak loading

DOEpatents

Perez, Richard

2005-05-03

A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply.

Autonomous Power System intelligent diagnosis and control

NASA Technical Reports Server (NTRS)

Ringer, Mark J.; Quinn, Todd M.; Merolla, Anthony

1991-01-01

The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution hardware. Knowledge-based software provides a robust method of control for highly complex space-based power systems that conventional methods do not allow. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis and control, the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space based power system. The operation of the Autonomous Power System as a whole is described and the responsibilities of the three elements - APEX, AIPS, and Brassboard - are characterized. A discussion of the methodologies used in each element is provided. Future plans are discussed for the growth of the Autonomous Power System.

Autonomous power system intelligent diagnosis and control

NASA Technical Reports Server (NTRS)

Ringer, Mark J.; Quinn, Todd M.; Merolla, Anthony

1991-01-01

The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution hardware. Knowledge-based software provides a robust method of control for highly complex space-based power systems that conventional methods do not allow. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis and control, the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space based power system. The operation of the Autonomous Power System as a whole is described and the responsibilities of the three elements - APEX, AIPS, and Brassboard - are characterized. A discussion of the methodologies used in each element is provided. Future plans are discussed for the growth of the Autonomous Power System.

Inertial Response of Wind Power Plants: A Comparison of Frequency-Based Inertial Control and Stepwise Inertial Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Xiao; Gao, Wenzhong; Wang, Jianhui

The frequency regulation capability of a wind power plant plays an important role in enhancing frequency reliability especially in an isolated power system with high wind power penetration levels. A comparison of two types of inertial control methods, namely frequency-based inertial control (FBIC) and stepwise inertial control (SIC), is presented in this paper. Comprehensive case studies are carried out to reveal features of the different inertial control methods, simulated in a modified Western System Coordination Council (WSCC) nine-bus power grid using real-time digital simulator (RTDS) platform. The simulation results provide an insight into the inertial control methods under various scenarios.

Integrated control system and method

DOEpatents

Wang, Paul Sai Keat; Baldwin, Darryl; Kim, Myoungjin

2013-10-29

An integrated control system for use with an engine connected to a generator providing electrical power to a switchgear is disclosed. The engine receives gas produced by a gasifier. The control system includes an electronic controller associated with the gasifier, engine, generator, and switchgear. A gas flow sensor monitors a gas flow from the gasifier to the engine through an engine gas control valve and provides a gas flow signal to the electronic controller. A gas oversupply sensor monitors a gas oversupply from the gasifier and provides an oversupply signal indicative of gas not provided to the engine. A power output sensor monitors a power output of the switchgear and provide a power output signal. The electronic controller changes gas production of the gasifier and the power output rating of the switchgear based on the gas flow signal, the oversupply signal, and the power output signal.

Improved control strategy for PI-R current of DFIG considering voltage and current harmonics compensation

NASA Astrophysics Data System (ADS)

Song, S. Y.; Liu, Q. H.; Zhao, Y. N.; Liu, S. Y.

2016-08-01

With the rapid development of wind power generation, the related research of wind power control and integration issues has attracted much attention, and the focus of the research are shifting away from the ideal power grid environment to the actual power grid environment. As the main stream wind turbine generator, a doubly-fed induction generator (DFIG) is connected to the power grid directly by its stator, so it is particularly sensitive to the power grid. This paper studies the improvement of DFIG control technology in the power grid harmonic environment. Based on the DFIG dynamic model considering the power grid harmonic environment, this paper introduces the shortcomings of the common control strategy of DFIG, and puts forward the enhanced method. The decoupling control of the system is realized by compensating the coupling between the rotor harmonic voltage and harmonic current, improving the control performance. In addition, the simulation experiments on PSCAD/EMTDC are carried out to verify the correctness and effectiveness of the improved scheme.

Power effects on cognitive control: Turning conflict into action.

PubMed

Schmid, Petra C; Kleiman, Tali; Amodio, David M

2015-06-01

Power is known to promote effective goal pursuit, especially when it requires one to overcome distractions or bias. We proposed that this effect involves the ability to engage and implement cognitive control. In Study 1, we demonstrated that power enhances behavioral performance on a response conflict task and that it does so by enhancing controlled processing rather than by reducing automatic processing. In Study 2, we used an event-related potential index of anterior cingulate activity to test whether power effects on control were due to enhanced conflict sensitivity or action implementation. Power did not significantly affect neural sensitivity to conflict; rather, high power was associated with a stronger link between conflict processing and intended action, relative to low power. These findings suggest a new perspective on how social factors can affect controlled processing and offer new evidence regarding the transition between conflict detection and the implementation of action control. (c) 2015 APA, all rights reserved).

Robust Power Management Control for Stand-Alone Hybrid Power Generation System

NASA Astrophysics Data System (ADS)

Kamal, Elkhatib; Adouane, Lounis; Aitouche, Abdel; Mohammed, Walaa

2017-01-01

This paper presents a new robust fuzzy control of energy management strategy for the stand-alone hybrid power systems. It consists of two levels named centralized fuzzy supervisory control which generates the power references for each decentralized robust fuzzy control. Hybrid power systems comprises: a photovoltaic panel and wind turbine as renewable sources, a micro turbine generator and a battery storage system. The proposed control strategy is able to satisfy the load requirements based on a fuzzy supervisor controller and manage power flows between the different energy sources and the storage unit by respecting the state of charge and the variation of wind speed and irradiance. Centralized controller is designed based on If-Then fuzzy rules to manage and optimize the hybrid power system production by generating the reference power for photovoltaic panel and wind turbine. Decentralized controller is based on the Takagi-Sugeno fuzzy model and permits us to stabilize each photovoltaic panel and wind turbine in presence of disturbances and parametric uncertainties and to optimize the tracking reference which is given by the centralized controller level. The sufficient conditions stability are formulated in the format of linear matrix inequalities using the Lyapunov stability theory. The effectiveness of the proposed Strategy is finally demonstrated through a SAHPS (stand-alone hybrid power systems) to illustrate the effectiveness of the overall proposed method.

Voltage droop Coordinating Control applied in UPFC and STATCOM system

NASA Astrophysics Data System (ADS)

Junhui, Huang; Zhuyi, Peng; Chengjie, Ni; Yiqing, Xu; Jiliang, Xue

2018-04-01

When UPFC, unified power flow controller is applied with other FACTS into power grid, it is possible that the voltage controlled vibrates constantly to response to a sudden reactive power turbulent in grid if the parameters of these FACTS are not coordinating reasonably. Moreover, the reactive power generated by these equipment will intertwine unexpectedly. The article proposes a method named voltage-reactive power droop control to allow the reference voltage fluctuating around the rating voltage so that the vibration is reduced and the power distribution is improved. Finally, the article cite a electric-magnetic simulation by EMTDC models of east-China power grid to prove it effective when applied to improve the response characteristics to sudden turbulence in power grid.

Demonstration of Essential Reliability Services by a 300-MW Solar Photovoltaic Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loutan, Clyde; Klauer, Peter; Chowdhury, Sirajul

The California Independent System Operator (CAISO), First Solar, and the National Renewable Energy Laboratory (NREL) conducted a demonstration project on a large utility-scale photovoltaic (PV) power plant in California to test its ability to provide essential ancillary services to the electric grid. With increasing shares of solar- and wind-generated energy on the electric grid, traditional generation resources equipped with automatic governor control (AGC) and automatic voltage regulation controls -- specifically, fossil thermal -- are being displaced. The deployment of utility-scale, grid-friendly PV power plants that incorporate advanced capabilities to support grid stability and reliability is essential for the large-scale integrationmore » of PV generation into the electric power grid, among other technical requirements. A typical PV power plant consists of multiple power electronic inverters and can contribute to grid stability and reliability through sophisticated 'grid-friendly' controls. In this way, PV power plants can be used to mitigate the impact of variability on the grid, a role typically reserved for conventional generators. In August 2016, testing was completed on First Solar's 300-MW PV power plant, and a large amount of test data was produced and analyzed that demonstrates the ability of PV power plants to use grid-friendly controls to provide essential reliability services. These data showed how the development of advanced power controls can enable PV to become a provider of a wide range of grid services, including spinning reserves, load following, voltage support, ramping, frequency response, variability smoothing, and frequency regulation to power quality. Specifically, the tests conducted included various forms of active power control such as AGC and frequency regulation; droop response; and reactive power, voltage, and power factor controls. This project demonstrated that advanced power electronics and solar generation can be controlled to contribute to system-wide reliability. It was shown that the First Solar plant can provide essential reliability services related to different forms of active and reactive power controls, including plant participation in AGC, primary frequency control, ramp rate control, and voltage regulation. For AGC participation in particular, by comparing the PV plant testing results to the typical performance of individual conventional technologies, we showed that regulation accuracy by the PV plant is 24-30 points better than fast gas turbine technologies. The plant's ability to provide volt-ampere reactive control during periods of extremely low power generation was demonstrated as well. The project team developed a pioneering demonstration concept and test plan to show how various types of active and reactive power controls can leverage PV generation's value from being a simple variable energy resource to a resource that provides a wide range of ancillary services. With this project's approach to a holistic demonstration on an actual, large, utility-scale, operational PV power plant and dissemination of the obtained results, the team sought to close some gaps in perspectives that exist among various stakeholders in California and nationwide by providing real test data.« less

10 CFR 470.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ENERGY ENERGY CONSERVATION APPROPRIATE TECHNOLOGY SMALL GRANTS PROGRAM § 470.2 Definitions. As used in... indirectly, controls or has the power to control another concern, is controlled by or is within the power to control of another concern or, together with another concern, is controlled by or is within the power to...

Installation of automatic control at experimental breeder reactor II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, H.A.; Booty, W.F.; Chick, D.R.

1985-08-01

The Experimental Breeder Reactor II (EBR-II) has been modified to permit automatic control capability. Necessary mechanical and electrical changes were made on a regular control rod position; motor, gears, and controller were replaced. A digital computer system was installed that has the programming capability for varied power profiles. The modifications permit transient testing at EBR-II. Experiments were run that increased power linearly as much as 4 MW/s (16% of initial power of 25 MW(thermal)/s), held power constant, and decreased power at a rate no slower than the increase rate. Thus the performance of the automatic control algorithm, the mechanical andmore » electrical control equipment, and the qualifications of the driver fuel for future power change experiments were all demonstrated.« less

New power sharing control for inverter-dominated microgrid based on impedance match concept.

PubMed

Gu, Herong; Wang, Deyu; Shen, Hong; Zhao, Wei; Guo, Xiaoqiang

2013-01-01

Power flow control is one of the most important issues for operating the inverter-dominated autonomous microgrid. A technical challenge is how to achieve the accurate active/reactive power sharing of inverters. P-F and Q-V droop control schemes have been widely used for power sharing in the past decades. But they suffer from the poor power sharing in the presence of unequal line impedance. In order to solve the problem, a comprehensive analysis of the power droop control is presented, and a new droop control based on the impedance match concept is proposed in this paper. In addition, the design guidelines of control coefficients and virtual impedance are provided. Finally, the performance evaluation is carried out, and the evaluation results verify the effectiveness of the proposed method.

Advanced insulated gate bipolar transistor gate drive

DOEpatents

Short, James Evans [Monongahela, PA; West, Shawn Michael [West Mifflin, PA; Fabean, Robert J [Donora, PA

2009-08-04

A gate drive for an insulated gate bipolar transistor (IGBT) includes a control and protection module coupled to a collector terminal of the IGBT, an optical communications module coupled to the control and protection module, a power supply module coupled to the control and protection module and an output power stage module with inputs coupled to the power supply module and the control and protection module, and outputs coupled to a gate terminal and an emitter terminal of the IGBT. The optical communications module is configured to send control signals to the control and protection module. The power supply module is configured to distribute inputted power to the control and protection module. The control and protection module outputs on/off, soft turn-off and/or soft turn-on signals to the output power stage module, which, in turn, supplies a current based on the signal(s) from the control and protection module for charging or discharging an input capacitance of the IGBT.

Propulsion and Power Rapid Response R&D Support Delivery Order 0041: Power Dense Solid Oxide Fuel Cell Systems: High Performance, High Power Density Solid Oxide Fuel Cells - Materials and Load Control

DTIC Science & Technology

2008-12-01

respectively. 2.3.1.2 Brushless DC Motor Brushless direct current ( BLDC ) motors feature high efficiency, ease of control , and astonishingly high power...modeling purposes, we ignore the modeling complexity of the BLDC controller and treat the motor and controller “as commutated”, i.e. we assume the...High Performance, High Power Density Solid Oxide Fuel Cells− Materials and Load Control Stephen W. Sofie, Steven R. Shaw, Peter A. Lindahl, and Lee H

Extended performance electric propulsion power processor design study. Volume 2: Technical summary

NASA Technical Reports Server (NTRS)

Biess, J. J.; Inouye, L. Y.; Schoenfeld, A. D.

1977-01-01

Electric propulsion power processor technology has processed during the past decade to the point that it is considered ready for application. Several power processor design concepts were evaluated and compared. Emphasis was placed on a 30 cm ion thruster power processor with a beam power rating supply of 2.2KW to 10KW for the main propulsion power stage. Extension in power processor performance were defined and were designed in sufficient detail to determine efficiency, component weight, part count, reliability and thermal control. A detail design was performed on a microprocessor as the thyristor power processor controller. A reliability analysis was performed to evaluate the effect of the control electronics redesign. Preliminary electrical design, mechanical design and thermal analysis were performed on a 6KW power transformer for the beam supply. Bi-Mod mechanical, structural and thermal control configurations were evaluated for the power processor and preliminary estimates of mechanical weight were determined.

Electrical engineering unit for the reactive power control of the load bus at the voltage instability

NASA Astrophysics Data System (ADS)

Kotenev, A. V.; Kotenev, V. I.; Kochetkov, V. V.; Elkin, D. A.

2018-01-01

For the purpose of reactive power control error reduction and decrease of the voltage sags in the electric power system caused by the asynchronous motors started the mathematical model of the load bus was developed. The model was built up of the sub-models of the following elements: a transformer, a transmission line, a synchronous and an asynchronous loads and a capacitor bank load, and represents the automatic reactive power control system taking into account electromagnetic processes of the asynchronous motors started and reactive power changing of the electric power system elements caused by the voltage fluctuation. The active power/time and reactive power/time characteristics based on the recommended procedure of the equivalent electric circuit parameters calculation were obtained. The derived automatic reactive power control system was shown to eliminate the voltage sags in the electric power system caused by the asynchronous motors started.

Power-Aware Compiler Controllable Chip Multiprocessor

NASA Astrophysics Data System (ADS)

Shikano, Hiroaki; Shirako, Jun; Wada, Yasutaka; Kimura, Keiji; Kasahara, Hironori

A power-aware compiler controllable chip multiprocessor (CMP) is presented and its performance and power consumption are evaluated with the optimally scheduled advanced multiprocessor (OSCAR) parallelizing compiler. The CMP is equipped with power control registers that change clock frequency and power supply voltage to functional units including processor cores, memories, and an interconnection network. The OSCAR compiler carries out coarse-grain task parallelization of programs and reduces power consumption using architectural power control support and the compiler's power saving scheme. The performance evaluation shows that MPEG-2 encoding on the proposed CMP with four CPUs results in 82.6% power reduction in real-time execution mode with a deadline constraint on its sequential execution time. Furthermore, MP3 encoding on a heterogeneous CMP with four CPUs and four accelerators results in 53.9% power reduction at 21.1-fold speed-up in performance against its sequential execution in the fastest execution mode.

Energy storage connection system

DOEpatents

Benedict, Eric L.; Borland, Nicholas P.; Dale, Magdelena; Freeman, Belvin; Kite, Kim A.; Petter, Jeffrey K.; Taylor, Brendan F.

2012-07-03

A power system for connecting a variable voltage power source, such as a power controller, with a plurality of energy storage devices, at least two of which have a different initial voltage than the output voltage of the variable voltage power source. The power system includes a controller that increases the output voltage of the variable voltage power source. When such output voltage is substantially equal to the initial voltage of a first one of the energy storage devices, the controller sends a signal that causes a switch to connect the variable voltage power source with the first one of the energy storage devices. The controller then causes the output voltage of the variable voltage power source to continue increasing. When the output voltage is substantially equal to the initial voltage of a second one of the energy storage devices, the controller sends a signal that causes a switch to connect the variable voltage power source with the second one of the energy storage devices.

Solar powered actuator with continuously variable auxiliary power control

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1984-01-01

A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines.

Automated Power Systems Management (APSM)

NASA Technical Reports Server (NTRS)

Bridgeforth, A. O.

1981-01-01

A breadboard power system incorporating autonomous functions of monitoring, fault detection and recovery, command and control was developed, tested and evaluated to demonstrate technology feasibility. Autonomous functions including switching of redundant power processing elements, individual load fault removal, and battery charge/discharge control were implemented by means of a distributed microcomputer system within the power subsystem. Three local microcomputers provide the monitoring, control and command function interfaces between the central power subsystem microcomputer and the power sources, power processing and power distribution elements. The central microcomputer is the interface between the local microcomputers and the spacecraft central computer or ground test equipment.

Network-Cognizant Voltage Droop Control for Distribution Grids

DOE PAGES

Baker, Kyri; Bernstein, Andrey; Dall'Anese, Emiliano; ...

2017-08-07

Our paper examines distribution systems with a high integration of distributed energy resources (DERs) and addresses the design of local control methods for real-time voltage regulation. Particularly, the paper focuses on proportional control strategies where the active and reactive output-powers of DERs are adjusted in response to (and proportionally to) local changes in voltage levels. The design of the voltage-active power and voltage-reactive power characteristics leverages suitable linear approximation of the AC power-flow equations and is network-cognizant; that is, the coefficients of the controllers embed information on the location of the DERs and forecasted non-controllable loads/injections and, consequently, on themore » effect of DER power adjustments on the overall voltage profile. We pursued a robust approach to cope with uncertainty in the forecasted non-controllable loads/power injections. Stability of the proposed local controllers is analytically assessed and numerically corroborated.« less

Network-Cognizant Voltage Droop Control for Distribution Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, Kyri; Bernstein, Andrey; Dall'Anese, Emiliano

Our paper examines distribution systems with a high integration of distributed energy resources (DERs) and addresses the design of local control methods for real-time voltage regulation. Particularly, the paper focuses on proportional control strategies where the active and reactive output-powers of DERs are adjusted in response to (and proportionally to) local changes in voltage levels. The design of the voltage-active power and voltage-reactive power characteristics leverages suitable linear approximation of the AC power-flow equations and is network-cognizant; that is, the coefficients of the controllers embed information on the location of the DERs and forecasted non-controllable loads/injections and, consequently, on themore » effect of DER power adjustments on the overall voltage profile. We pursued a robust approach to cope with uncertainty in the forecasted non-controllable loads/power injections. Stability of the proposed local controllers is analytically assessed and numerically corroborated.« less

Power Maximization Control of Variable Speed Wind Generation System Using Permanent Magnet Synchronous Generator

NASA Astrophysics Data System (ADS)

Morimoto, Shigeo; Nakamura, Tomohiko; Takeda, Yoji

This paper proposes the sensorless output power maximization control of the wind generation system. A permanent magnet synchronous generator (PMSG) is used as a variable speed generator in the proposed system. The generator torque is suitably controlled according to the generator speed and thus the power from a wind turbine settles down on the maximum power point by the proposed MPPT control method, where the information of wind velocity is not required. Moreover, the maximum available generated power is obtained by the optimum current vector control. The current vector of PMSG is optimally controlled according to the generator speed and the required torque in order to minimize the losses of PMSG considering the voltage and current constraints. The proposed wind power generation system can be achieved without mechanical sensors such as a wind velocity detector and a position sensor. Several experimental results show the effectiveness of the proposed control method.

Control and protection system for an installation for the combined production of electrical and thermal energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agazzone, U.; Ausiello, F.P.

1981-06-23

A power-generating installation comprises a plurality of modular power plants each comprised of an internal combustion engine connected to an electric machine. The electric machine is used to start the engine and thereafter operates as a generator supplying power to an electrical network common to all the modular plants. The installation has a control and protection system comprising a plurality of control modules each associated with a respective plant, and a central unit passing control signals to the modules to control starting and stopping of the individual power plants. Upon the detection of abnormal operation or failure of its associatedmore » power plant, each control module transmits an alarm signal back to the central unit which thereupon stops, or prevents the starting, of the corresponding power plant. Parameters monitored by each control module include generated current and inter-winding leakage current of the electric machine.« less

35. SITE BUILDING 004 ELECTRIC POWER STATION CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. SITE BUILDING 004 - ELECTRIC POWER STATION - CONTROL ROOM OF ELECTRIC POWER STATION WITH DIESEL ENGINE POWERED ELECTRIC GENERATION EQUIPMENT IN BACKGROUND. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Soft-Starting Power-Factor Motor Controller

NASA Technical Reports Server (NTRS)

Nola, F. J.

1983-01-01

Three-phase power-factor controller with soft start is based on earlier version that does not control starting transients. Additional components serve to turn off "run" command signal and substitute gradual startup command signal during preset startup interval. Improved controller reduces large current surge that usually accompanies starting. Controller applies power smoothly, without causing motor vibrations.

Active Power Control of Wind Turbines for Ancillary Services: A Comparison of Pitch and Torque Control Methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aho, Jacob; Fleming, Paul; Pao, Lucy Y.

As wind energy generation becomes more prevalent in some regions, there is increased demand for wind power plants to provide ancillary services, which are essential for grid reliability. This paper compares two different wind turbine control methodologies to provide active power control (APC) ancillary services, which include derating or curtailing power generation, providing automatic generation control (AGC), and providing primary frequency control (PFC). The torque APC controller provides all power control through the power electronics whereas the pitch APC controller uses the blade pitch actuators as the primary means of power control. These controllers are simulated under various wind conditionsmore » with different derating set points and AGC participation levels. The metrics used to compare their performance are the damage equivalent loads (DELs) induced on the structural components and AGC performance metrics, which are used to determine the payments for AGC services by system operators in the United States. The simulation results show that derating the turbine reduces structural loads for both control methods, with the APC pitch control providing larger reductions in DELs, lower AGC performance scores, and higher root-mean-square pitch rates. Providing AGC increases the structural loads when compared to only derating the turbine, but even the AGC DELs are generally lower than those of the baseline control system. The torque APC control methodology also allows for more sustained PFC responses under certain derating conditions.« less

Active Power Control of Waked Wind Farms: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fleming, Paul A; van Wingerden, Jan-Willem; Pao, Lucy

Active power control can be used to balance the total power generated by wind farms with the power consumed on the electricity grid. With the increasing penetration levels of wind energy, there is an increasing need for this ancillary service. In this paper, we show that the tracking of a certain power reference signal provided by the transmission system operator can be significantly improved by using feedback control at the wind farm level. We propose a simple feedback control law that significantly improves the tracking behavior of the total power output of the farm, resulting in higher performance scores. Themore » effectiveness of the proposed feedback controller is demonstrated using high-fidelity computational fluid dynamics simulations of a small wind farm.« less

Bi-directional power control system for voltage converter

DOEpatents

Garrigan, Neil Richard; King, Robert Dean; Schwartz, James Edward

1999-01-01

A control system for a voltage converter includes: a power comparator for comparing a power signal on input terminals of the converter with a commanded power signal and producing a power comparison signal; a power regulator for transforming the power comparison signal to a commanded current signal; a current comparator for comparing the commanded current signal with a measured current signal on output terminals of the converter and producing a current comparison signal; a current regulator for transforming the current comparison signal to a pulse width modulator (PWM) duty cycle command signal; and a PWM for using the PWM duty cycle command signal to control electrical switches of the converter. The control system may further include: a command multiplier for converting a voltage signal across the output terminals of the converter to a gain signal having a value between zero (0) and unity (1), and a power multiplier for multiplying the commanded power signal by the gain signal to provide a limited commanded power signal, wherein power comparator compares the limited commanded power signal with the power signal on the input terminals.

Bi-directional power control system for voltage converter

DOEpatents

Garrigan, N.R.; King, R.D.; Schwartz, J.E.

1999-05-11

A control system for a voltage converter includes: a power comparator for comparing a power signal on input terminals of the converter with a commanded power signal and producing a power comparison signal; a power regulator for transforming the power comparison signal to a commanded current signal; a current comparator for comparing the commanded current signal with a measured current signal on output terminals of the converter and producing a current comparison signal; a current regulator for transforming the current comparison signal to a pulse width modulator (PWM) duty cycle command signal; and a PWM for using the PWM duty cycle command signal to control electrical switches of the converter. The control system may further include: a command multiplier for converting a voltage signal across the output terminals of the converter to a gain signal having a value between zero (0) and unity (1), and a power multiplier for multiplying the commanded power signal by the gain signal to provide a limited commanded power signal, wherein power comparator compares the limited commanded power signal with the power signal on the input terminals. 10 figs.

Power quality load management for large spacecraft electrical power systems

NASA Technical Reports Server (NTRS)

Lollar, Louis F.

1988-01-01

In December, 1986, a Center Director's Discretionary Fund (CDDF) proposal was granted to study power system control techniques in large space electrical power systems. Presented are the accomplishments in the area of power system control by power quality load management. In addition, information concerning the distortion problems in a 20 kHz ac power system is presented.

Hybrid zero-voltage switching (ZVS) control for power inverters

DOEpatents

Amirahmadi, Ahmadreza; Hu, Haibing; Batarseh, Issa

2016-11-01

A power inverter combination includes a half-bridge power inverter including first and second semiconductor power switches receiving input power having an intermediate node therebetween providing an inductor current through an inductor. A controller includes input comparison circuitry receiving the inductor current having outputs coupled to first inputs of pulse width modulation (PWM) generation circuitry, and a predictive control block having an output coupled to second inputs of the PWM generation circuitry. The predictive control block is coupled to receive a measure of Vin and an output voltage at a grid connection point. A memory stores a current control algorithm configured for resetting a PWM period for a switching signal applied to control nodes of the first and second power switch whenever the inductor current reaches a predetermined upper limit or a predetermined lower limit.

Analysis and experimental verification of new power flow control for grid-connected inverter with LCL filter in microgrid.

PubMed

Gu, Herong; Guan, Yajuan; Wang, Huaibao; Wei, Baoze; Guo, Xiaoqiang

2014-01-01

Microgrid is an effective way to integrate the distributed energy resources into the utility networks. One of the most important issues is the power flow control of grid-connected voltage-source inverter in microgrid. In this paper, the small-signal model of the power flow control for the grid-connected inverter is established, from which it can be observed that the conventional power flow control may suffer from the poor damping and slow transient response. While the new power flow control can mitigate these problems without affecting the steady-state power flow regulation. Results of continuous-domain simulations in MATLAB and digital control experiments based on a 32-bit fixed-point TMS320F2812 DSP are in good agreement, which verify the small signal model analysis and effectiveness of the proposed method.

New Power Sharing Control for Inverter-Dominated Microgrid Based on Impedance Match Concept

PubMed Central

Gu, Herong; Wang, Deyu; Shen, Hong; Zhao, Wei; Guo, Xiaoqiang

2013-01-01

Power flow control is one of the most important issues for operating the inverter-dominated autonomous microgrid. A technical challenge is how to achieve the accurate active/reactive power sharing of inverters. P-F and Q-V droop control schemes have been widely used for power sharing in the past decades. But they suffer from the poor power sharing in the presence of unequal line impedance. In order to solve the problem, a comprehensive analysis of the power droop control is presented, and a new droop control based on the impedance match concept is proposed in this paper. In addition, the design guidelines of control coefficients and virtual impedance are provided. Finally, the performance evaluation is carried out, and the evaluation results verify the effectiveness of the proposed method. PMID:24453910

Feedback power control strategies in wireless sensor networks with joint channel decoding.

PubMed

Abrardo, Andrea; Ferrari, Gianluigi; Martalò, Marco; Perna, Fabio

2009-01-01

In this paper, we derive feedback power control strategies for block-faded multiple access schemes with correlated sources and joint channel decoding (JCD). In particular, upon the derivation of the feasible signal-to-noise ratio (SNR) region for the considered multiple access schemes, i.e., the multidimensional SNR region where error-free communications are, in principle, possible, two feedback power control strategies are proposed: (i) a classical feedback power control strategy, which aims at equalizing all link SNRs at the access point (AP), and (ii) an innovative optimized feedback power control strategy, which tries to make the network operational point fall in the feasible SNR region at the lowest overall transmit energy consumption. These strategies will be referred to as "balanced SNR" and "unbalanced SNR," respectively. While they require, in principle, an unlimited power control range at the sources, we also propose practical versions with a limited power control range. We preliminary consider a scenario with orthogonal links and ideal feedback. Then, we analyze the robustness of the proposed power control strategies to possible non-idealities, in terms of residual multiple access interference and noisy feedback channels. Finally, we successfully apply the proposed feedback power control strategies to a limiting case of the class of considered multiple access schemes, namely a central estimating officer (CEO) scenario, where the sensors observe noisy versions of a common binary information sequence and the AP's goal is to estimate this sequence by properly fusing the soft-output information output by the JCD algorithm.

Development of a microprocessor controller for stand-alone photovoltaic power systems

NASA Technical Reports Server (NTRS)

Millner, A. R.; Kaufman, D. L.

1984-01-01

A controller for stand-alone photovoltaic systems has been developed using a low power CMOS microprocessor. It performs battery state of charge estimation, array control, load management, instrumentation, automatic testing, and communications functions. Array control options are sequential subarray switching and maximum power control. A calculator keypad and LCD display provides manual control, fault diagnosis and digital multimeter functions. An RS-232 port provides data logging or remote control capability. A prototype 5 kW unit has been built and tested successfully. The controller is expected to be useful in village photovoltaic power systems, large solar water pumping installations, and other battery management applications.

Performance Evaluation of UPQC under Nonlinear Unbalanced Load Conditions Using Synchronous Reference Frame Based Control

NASA Astrophysics Data System (ADS)

Kota, Venkata Reddy; Vinnakoti, Sudheer

2017-12-01

Today, maintaining Power Quality (PQ) is very important in the growing competent world. With new equipments and devices, new challenges are also being put before power system operators. Unified Power Quality Conditioner (UPQC) is proposed to mitigate many power quality problems and to improve the performance of the power system. In this paper, an UPQC with Fuzzy Logic controller for capacitor voltage balancing is proposed in Synchronous Reference Frame (SRF) based control with Modified Phased Locked Loop (MPLL). The proposed controller with SRF-MPLL based control is tested under non-linear and unbalanced load conditions. The system is developed in Matlab/Simulink and its performance is analyzed under various conditions like non-linear, unbalanced load and polluted supply voltage including voltage sag/swells. Active and reactive power flow in the system, power factor and %THD of voltages and currents before and after compensation are also analyzed in this work. Results prove the applicability of the proposed scheme for power quality improvement. It is observed that the fuzzy controller gives better performance than PI controller with faster capacitor voltage balancing and also improves the dynamic performance of the system.

Automated power distribution system hardware. [for space station power supplies

NASA Technical Reports Server (NTRS)

Anderson, Paul M.; Martin, James A.; Thomason, Cindy

1989-01-01

An automated power distribution system testbed for the space station common modules has been developed. It incorporates automated control and monitoring of a utility-type power system. Automated power system switchgear, control and sensor hardware requirements, hardware design, test results, and potential applications are discussed. The system is designed so that the automated control and monitoring of the power system is compatible with both a 208-V, 20-kHz single-phase AC system and a high-voltage (120 to 150 V) DC system.

Kilovolt dc solid state remote power controller development

NASA Technical Reports Server (NTRS)

Mitchell, J. T.

1982-01-01

The experience gained in developing and applying solid state power controller (SSPC) technology at high voltage dc (HVDC) potentials and power levels of up to 25 kilowatts is summarized. The HVDC switching devices, power switching concepts, drive circuits, and very fast acting overcurrent protection circuits were analyzed. A 25A bipolar breadboard with Darlington connected switching transistor was built. Fault testing at 900 volts was included. A bipolar transistor packaged breadboard design was developed. Power MOSFET remote power controller (RPC) was designed.

Satellite Power Systems (SPS) concept definition study. Volume 4: SPS point design definition

NASA Technical Reports Server (NTRS)

Hanley, G.

1978-01-01

The satellite power systems point design concept is described. The concept definition includes satellite, ground and space systems, and their relationships. Emphasis is placed on the definition of the GaAlAs photovoltaic satellite system. The major subsystems of the satellite system including power conversion, power distribution and control, microwave, attitude control and stationkeeping, thermal control, structures, and information management and control are discussed.

Optimal Self-Tuning PID Controller Based on Low Power Consumption for a Server Fan Cooling System.

PubMed

Lee, Chengming; Chen, Rongshun

2015-05-20

Recently, saving the cooling power in servers by controlling the fan speed has attracted considerable attention because of the increasing demand for high-density servers. This paper presents an optimal self-tuning proportional-integral-derivative (PID) controller, combining a PID neural network (PIDNN) with fan-power-based optimization in the transient-state temperature response in the time domain, for a server fan cooling system. Because the thermal model of the cooling system is nonlinear and complex, a server mockup system simulating a 1U rack server was constructed and a fan power model was created using a third-order nonlinear curve fit to determine the cooling power consumption by the fan speed control. PIDNN with a time domain criterion is used to tune all online and optimized PID gains. The proposed controller was validated through experiments of step response when the server operated from the low to high power state. The results show that up to 14% of a server's fan cooling power can be saved if the fan control permits a slight temperature response overshoot in the electronic components, which may provide a time-saving strategy for tuning the PID controller to control the server fan speed during low fan power consumption.

49 CFR 238.447 - Train operator's controls and power car cab layout.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Train operator's controls and power car cab layout... layout. (a) Train operator controls in the power car cab shall be arranged so as to minimize the chance.... (d) Power car cab information displays shall be designed with the following characteristics: (1...

49 CFR 238.447 - Train operator's controls and power car cab layout.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Train operator's controls and power car cab layout... layout. (a) Train operator controls in the power car cab shall be arranged so as to minimize the chance.... (d) Power car cab information displays shall be designed with the following characteristics: (1...

49 CFR 238.447 - Train operator's controls and power car cab layout.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Train operator's controls and power car cab layout... layout. (a) Train operator controls in the power car cab shall be arranged so as to minimize the chance.... (d) Power car cab information displays shall be designed with the following characteristics: (1...

Modified Perfect Harmonics Cancellation Control of a Grid Interfaced SPV Power Generation

NASA Astrophysics Data System (ADS)

Singh, B.; Shahani, D. T.; Verma, A. K.

2015-03-01

This paper deals with a grid interfaced solar photo voltaic (SPV) power generating system with modified perfect harmonic cancellation (MPHC) control for power quality improvement in terms of mitigation of the current harmonics, power factor correction, control of point of common coupling (PCC) voltage with reactive power compensation and load balancing in a three phase distribution system. The proposed grid interfaced SPV system consists of a SPV array, a dc-dc boost converter and a voltage source converter (VSC) used for the compensation of other connected linear and nonlinear loads at PCC. The reference grid currents are estimated using MPHC method and control signals are derived by using pulse width modulation (PWM) current controller of VSC. The SPV power is fed to the common dc bus of VSC and dc-dc boost converter using maximum power point tracking (MPPT). The dc link voltage of VSC is regulated by using dc voltage proportional integral (PI) controller. The analysis of the proposed SPV power generating system is carried out under dc/ac short circuit and severe SPV-SX and SPV-TX intrusion.

Integrated Orbit and Attitude Control for a Nanosatellite with Power Constraints

NASA Technical Reports Server (NTRS)

Naasz, Bo; Hall, Christopher; Berry, Matthew; Hy-Young, Kim

2003-01-01

Small satellites tend to be power-limited, so that actuators used to control the orbit and attitude must compete with each other as well as with other subsystems for limited electrical power. The Virginia Tech nanosatellite project, HokieSat, must use its limited power resources to operate pulsed-plasma thrusters for orbit control and magnetic torque coils for attitude control, while also providing power to a GPS receiver, a crosslink transceiver, and other subsystems. The orbit and attitude control strategies were developed independently. The attitude control system is based on an application of Linear Quadratic Regulator (LQR) to an averaged system of equations, whereas the orbit control is based on orbit element feedback. In this paper we describe the strategy for integrating these two control systems and present simulation results to verify the strategy.

Control Strategy of Active Power Filter Based on Modular Multilevel Converter

NASA Astrophysics Data System (ADS)

Xie, Xifeng

2018-03-01

To improve the capacity, pressure resistance and the equivalent switching frequency of active power filter (APF), a control strategy of APF based on Modular Multilevel Converter (MMC) is presented. In this Control Strategy, the indirect current control method is used to achieve active current and reactive current decoupling control; Voltage Balance Control Strategy is to stabilize sub-module capacitor voltage, the predictive current control method is used to Track and control of harmonic currents. As a result, the harmonic current is restrained, and power quality is improved. Finally, the simulation model of active power filter controller based on MMC is established in Matlab/Simulink, the simulation proves that the proposed strategy is feasible and correct.

Power system monitoring and source control of the Space Station Freedom DC power system testbed

NASA Technical Reports Server (NTRS)

Kimnach, Greg L.; Baez, Anastacio N.

1992-01-01

Unlike a terrestrial electric utility which can purchase power from a neighboring utility, the Space Station Freedom (SSF) has strictly limited energy resources; as a result, source control, system monitoring, system protection, and load management are essential to the safe and efficient operation of the SSF Electric Power System (EPS). These functions are being evaluated in the DC Power Management and Distribution (PMAD) Testbed which NASA LeRC has developed at the Power System Facility (PSF) located in Cleveland, Ohio. The testbed is an ideal platform to develop, integrate, and verify power system monitoring and control algorithms. State Estimation (SE) is a monitoring tool used extensively in terrestrial electric utilities to ensure safe power system operation. It uses redundant system information to calculate the actual state of the EPS, to isolate faulty sensors, to determine source operating points, to verify faults detected by subsidiary controllers, and to identify high impedance faults. Source control and monitoring safeguard the power generation and storage subsystems and ensure that the power system operates within safe limits while satisfying user demands with minimal interruptions. System monitoring functions, in coordination with hardware implemented schemes, provide for a complete fault protection system. The objective of this paper is to overview the development and integration of the state estimator and the source control algorithms.

Power system monitoring and source control of the Space Station Freedom dc-power system testbed

NASA Technical Reports Server (NTRS)

Kimnach, Greg L.; Baez, Anastacio N.

1992-01-01

Unlike a terrestrial electric utility which can purchase power from a neighboring utility, the Space Station Freedom (SSF) has strictly limited energy resources; as a result, source control, system monitoring, system protection, and load management are essential to the safe and efficient operation of the SSF Electric Power System (EPS). These functions are being evaluated in the dc Power Management and Distribution (PMAD) Testbed which NASA LeRC has developed at the Power System Facility (PSF) located in Cleveland, Ohio. The testbed is an ideal platform to develop, integrate, and verify power system monitoring and control algorithms. State Estimation (SE) is a monitoring tool used extensively in terrestrial electric utilities to ensure safe power system operation. It uses redundant system information to calculate the actual state of the EPS, to isolate faulty sensors, to determine source operating points, to verify faults detected by subsidiary controllers, and to identify high impedance faults. Source control and monitoring safeguard the power generation and storage subsystems and ensure that the power system operates within safe limits while satisfying user demands with minimal interruptions. System monitoring functions, in coordination with hardware implemented schemes, provide for a complete fault protection system. The objective of this paper is to overview the development and integration of the state estimator and the source control algorithms.

Palm Power Free-Piston Stirling Engine Control Electronics

NASA Astrophysics Data System (ADS)

Keiter, Douglas E.; Holliday, Ezekiel

2007-01-01

A prototype 35We, JP-8 fueled, soldier-wearable power system for the DARPA Palm Power program has been developed and tested by Sunpower. A hermetically-sealed 42We Sunpower Free-Piston Stirling Engine (FPSE) with integral linear alternator is the prime mover for this system. To maximize system efficiency over a broad range of output power, a non-dissipative, highly efficient electronic control system which modulates engine output power by varying piston stroke and converts the AC output voltage of the FPSE into 28Vdc for the Palm Power end user, has been designed and demonstrated as an integral component of the Palm Power system. This paper reviews the current status and progress made in developing the control electronics for the Palm Power system, in addition to describing the operation and demonstrated performance of the engine controller in the context of the current JP-8 fueled Palm Power system.

Utilisation of real-scale renewable energy test facility for validation of generic wind turbine and wind power plant controller models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeni, Lorenzo; Hesselbæk, Bo; Bech, John

This article presents an example of application of a modern test facility conceived for experiments regarding the integration of renewable energy in the power system. The capabilities of the test facility are used to validate dynamic simulation models of wind power plants and their controllers. The models are based on standard and generic blocks. The successful validation of events related to the control of active power (control phenomena in <10 Hz range, including frequency control and power oscillation damping) is described, demonstrating the capabilities of the test facility and drawing the track for future work and improvements.

Control aspects of the Schuchuli Village stand-alone photovoltaic power system

NASA Astrophysics Data System (ADS)

Groumpos, P. P.; Culler, J. E.; Delombard, R.

1984-11-01

A photovoltaic power system in an Arizona Indian village was installed. The control subsystem of this photovoltaic power system was analyzed. The four major functions of the control subsystem are: (1) voltage regulation; (2) load management; (3) water pump control; and (4) system protection. The control subsystem functions flowcharts for the control subsystem operation, and a computer program that models the control subsystem are presented.

Control aspects of the Schuchuli Village stand-alone photovoltaic power system

NASA Technical Reports Server (NTRS)

Groumpos, P. P.; Culler, J. E.; Delombard, R.

1984-01-01

A photovoltaic power system in an Arizona Indian village was installed. The control subsystem of this photovoltaic power system was analyzed. The four major functions of the control subsystem are: (1) voltage regulation; (2) load management; (3) water pump control; and (4) system protection. The control subsystem functions flowcharts for the control subsystem operation, and a computer program that models the control subsystem are presented.

Electrical Prototype Power Processor for the 30-cm Mercury electric propulsion engine

NASA Technical Reports Server (NTRS)

Biess, J. J.; Frye, R. J.

1978-01-01

An Electrical Prototpye Power Processor has been designed to the latest electrical and performance requirements for a flight-type 30-cm ion engine and includes all the necessary power, command, telemetry and control interfaces for a typical electric propulsion subsystem. The power processor was configured into seven separate mechanical modules that would allow subassembly fabrication, test and integration into a complete power processor unit assembly. The conceptual mechanical packaging of the electrical prototype power processor unit demonstrated the relative location of power, high voltage and control electronic components to minimize electrical interactions and to provide adequate thermal control in a vacuum environment. Thermal control was accomplished with a heat pipe simulator attached to the base of the modules.

NASA Ames Research Center 60 MW Power Supply Modernization

NASA Technical Reports Server (NTRS)

Choy, Yuen Ching; Ilinets, Boris V.; Miller, Ted; Nagel, Kirsten (Technical Monitor)

2001-01-01

The NASA Ames Research Center 60 MW DC Power Supply was built in 1974 to provide controlled DC power for the Thermophysics Facility Arc Jet Laboratory. The Power Supply has gradually losing reliability due to outdated technology and component life limitation. NASA has decided to upgrade the existing rectifier modules with contemporary high-power electronics and control equipment. NASA plans to complete this project in 2001. This project includes a complete replacement of obsolete thyristor stacks in all six rectifier modules and rectifier bridge control system. High power water-cooled thyristors and freewheeling diodes will be used. The rating of each of the six modules will be 4000 A at 5500 V. The control firing angle signal will be sent from the Facility Control System to six modules via fiberoptic cable. The Power Supply control and monitoring system will include a Master PLC in the Facility building and a Slave PLC in each rectifier module. This system will also monitor each thyristor level in each stack and the auxiliary equipment.

Scheduled power tracking control of the wind-storage hybrid system based on the reinforcement learning theory

NASA Astrophysics Data System (ADS)

Li, Ze

2017-09-01

In allusion to the intermittency and uncertainty of the wind electricity, energy storage and wind generator are combined into a hybrid system to improve the controllability of the output power. A scheduled power tracking control method is proposed based on the reinforcement learning theory and Q-learning algorithm. In this method, the state space of the environment is formed with two key factors, i.e. the state of charge of the energy storage and the difference value between the actual wind power and scheduled power, the feasible action is the output power of the energy storage, and the corresponding immediate rewarding function is designed to reflect the rationality of the control action. By interacting with the environment and learning from the immediate reward, the optimal control strategy is gradually formed. After that, it could be applied to the scheduled power tracking control of the hybrid system. Finally, the rationality and validity of the method are verified through simulation examples.

Simulation and Control Lab Development for Power and Energy Management for NASA Manned Deep Space Missions

NASA Technical Reports Server (NTRS)

McNelis, Anne M.; Beach, Raymond F.; Soeder, James F.; McNelis, Nancy B.; May, Ryan; Dever, Timothy P.; Trase, Larry

2014-01-01

The development of distributed hierarchical and agent-based control systems will allow for reliable autonomous energy management and power distribution for on-orbit missions. Power is one of the most critical systems on board a space vehicle, requiring quick response time when a fault or emergency is identified. As NASAs missions with human presence extend beyond low earth orbit autonomous control of vehicle power systems will be necessary and will need to reliably function for long periods of time. In the design of autonomous electrical power control systems there is a need to dynamically simulate and verify the EPS controller functionality prior to use on-orbit. This paper presents the work at NASA Glenn Research Center in Cleveland, Ohio where the development of a controls laboratory is being completed that will be utilized to demonstrate advanced prototype EPS controllers for space, aeronautical and terrestrial applications. The control laboratory hardware, software and application of an autonomous controller for demonstration with the ISS electrical power system is the subject of this paper.

Shifting and power sharing control of a novel dual input clutchless transmission for electric vehicles

NASA Astrophysics Data System (ADS)

Liang, Jiejunyi; Yang, Haitao; Wu, Jinglai; Zhang, Nong; Walker, Paul D.

2018-05-01

To improve the overall efficiency of electric vehicles and guarantee the driving comfort and vehicle drivability under the concept of simplifying mechanism complexity and minimizing manufacturing cost, this paper proposes a novel clutchless power-shifting transmission system with shifting control strategy and power sharing control strategy. The proposed shifting strategy takes advantage of the transmission architecture to achieve power-on shifting, which greatly improves the driving comfort compared with conventional automated manual transmission, with a bump function based shifting control method. To maximize the overall efficiency, a real-time power sharing control strategy is designed to solve the power distribution problem between the two motors. Detailed mathematical model is built to verify the effectiveness of the proposed methods. The results demonstrate the proposed strategies considerably improve the overall efficiency while achieve non-interrupted power-on shifting and maintain the vehicle jerk during shifting under an acceptable threshold.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Microprocessor-based control systems application in nuclear power plant critical systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shah, M.R.; Nowak, J.B.

Microprocessor-based control systems have been used in fossil power plants and are receiving greater acceptance for application in nuclear plants. This technology is not new but it does require unique considerations when applied to nuclear power plants. Sargent and Lundy (S and L) has used a microprocessor-based component logic control system (interposing Logic System) for safety- and non-safety-related components in nuclear power plants under construction overseas. Currently, S and L is in the design stage to replace an existing analog control system with a microprocessor-based control system in the U.S. The trend in the industry is to replace systems inmore » existing plants or design new power plants with microprocessor-based control systems.« less

Indirect adaptive soft computing based wavelet-embedded control paradigms for WT/PV/SOFC in a grid/charging station connected hybrid power system.

PubMed

Mumtaz, Sidra; Khan, Laiq; Ahmed, Saghir; Bader, Rabiah

2017-01-01

This paper focuses on the indirect adaptive tracking control of renewable energy sources in a grid-connected hybrid power system. The renewable energy systems have low efficiency and intermittent nature due to unpredictable meteorological conditions. The domestic load and the conventional charging stations behave in an uncertain manner. To operate the renewable energy sources efficiently for harvesting maximum power, instantaneous nonlinear dynamics should be captured online. A Chebyshev-wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control paradigm is proposed for variable speed wind turbine-permanent synchronous generator (VSWT-PMSG). A Hermite-wavelet incorporated NeuroFuzzy indirect adaptive MPPT control strategy for photovoltaic (PV) system to extract maximum power and indirect adaptive tracking control scheme for Solid Oxide Fuel Cell (SOFC) is developed. A comprehensive simulation test-bed for a grid-connected hybrid power system is developed in Matlab/Simulink. The robustness of the suggested indirect adaptive control paradigms are evaluated through simulation results in a grid-connected hybrid power system test-bed by comparison with conventional and intelligent control techniques. The simulation results validate the effectiveness of the proposed control paradigms.

Indirect adaptive soft computing based wavelet-embedded control paradigms for WT/PV/SOFC in a grid/charging station connected hybrid power system

PubMed Central

Khan, Laiq; Ahmed, Saghir; Bader, Rabiah

2017-01-01

This paper focuses on the indirect adaptive tracking control of renewable energy sources in a grid-connected hybrid power system. The renewable energy systems have low efficiency and intermittent nature due to unpredictable meteorological conditions. The domestic load and the conventional charging stations behave in an uncertain manner. To operate the renewable energy sources efficiently for harvesting maximum power, instantaneous nonlinear dynamics should be captured online. A Chebyshev-wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control paradigm is proposed for variable speed wind turbine-permanent synchronous generator (VSWT-PMSG). A Hermite-wavelet incorporated NeuroFuzzy indirect adaptive MPPT control strategy for photovoltaic (PV) system to extract maximum power and indirect adaptive tracking control scheme for Solid Oxide Fuel Cell (SOFC) is developed. A comprehensive simulation test-bed for a grid-connected hybrid power system is developed in Matlab/Simulink. The robustness of the suggested indirect adaptive control paradigms are evaluated through simulation results in a grid-connected hybrid power system test-bed by comparison with conventional and intelligent control techniques. The simulation results validate the effectiveness of the proposed control paradigms. PMID:28877191

MATLAB Simulation of UPQC for Power Quality Mitigation Using an Ant Colony Based Fuzzy Control Technique

PubMed Central

Kumarasabapathy, N.; Manoharan, P. S.

2015-01-01

This paper proposes a fuzzy logic based new control scheme for the Unified Power Quality Conditioner (UPQC) for minimizing the voltage sag and total harmonic distortion in the distribution system consequently to improve the power quality. UPQC is a recent power electronic module which guarantees better power quality mitigation as it has both series-active and shunt-active power filters (APFs). The fuzzy logic controller has recently attracted a great deal of attention and possesses conceptually the quality of the simplicity by tackling complex systems with vagueness and ambiguity. In this research, the fuzzy logic controller is utilized for the generation of reference signal controlling the UPQC. To enable this, a systematic approach for creating the fuzzy membership functions is carried out by using an ant colony optimization technique for optimal fuzzy logic control. An exhaustive simulation study using the MATLAB/Simulink is carried out to investigate and demonstrate the performance of the proposed fuzzy logic controller and the simulation results are compared with the PI controller in terms of its performance in improving the power quality by minimizing the voltage sag and total harmonic distortion. PMID:26504895

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

NASA Technical Reports Server (NTRS)

Soeder, James F.; Dever, Timothy P.; McNelis, Anne M.; Beach, Raymond F.; Trase, Larry M.; May, Ryan D.

2014-01-01

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASA's current long term human space platform, the International Space Station, is in low Earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond low Earth orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

NASA Technical Reports Server (NTRS)

Soeder, James F.; Dever, Timothy P.; McNelis, Anne M.; Beach, Raymond F.; Trase, Larry M.; May, Ryan D.

2014-01-01

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASA's current long term human space platform, the International Space Station, is in low earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond Low Earth Orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

NASA Technical Reports Server (NTRS)

Soeder, James F.; Dever, Timothy P.; McNelis, Anne M.; Beach, Raymond F.; Trase, Larry M.; May, Ryan

2014-01-01

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASAs current long term human space platform, the International Space Station, is in low earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond Low Earth Orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

78 FR 38739 - Special Nuclear Material Control and Accounting Systems for Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0109] Special Nuclear Material Control and Accounting... Guide (RG) 5.29, ``Special Nuclear Material Control and Accounting Systems for Nuclear Power Plants... material control and accounting. This guide applies to all nuclear power plants. ADDRESSES: Please refer to...

Methods to Control EMI Noises Produced in Power Converter Systems

NASA Astrophysics Data System (ADS)

Mutoh, Nobuyoshi; Ogata, Mitukatu

A new method to control EMI noises produced in power converters (rectifier and inverter) composed of IPMs (Intelligent Power Modules) is studied especially focusing on differential mode noises. The differential mode noises are occurred due to switching operations of the PWM control. As they are diffused into the ground through stray capacitors distributed between the ground and the power transmission lines and machine frames, differential mode noises should be confined and suppressed within the smallest area where power converters are laid out. It is impossible to control differential mode noises easily occurring diffusion by the conventional methods like filtering techniques. So, a new EMI noise control method using a multi-power circuit technique is proposed. The proposed method of the effectiveness has been verified through simulations and experiments.

Power Systems Operations and Controls | Grid Modernization | NREL

Science.gov Websites

controlled electric grid-with one-way delivery of power from central-station power plants-into one that Manager, Energy Systems Optimization and Control Group murali.baggu@nrel.gov | 303-275-4337

A hybrid electromechanical solid state switch for ac power control

NASA Technical Reports Server (NTRS)

1972-01-01

Bidirectional thyristor coupled to a series of actuator driven electromechanical contacts generates hybrid electromechanical solid state switch for ac power control. Device is useful in power control applications where zero crossover switching is required.

Power Converters Maximize Outputs Of Solar Cell Strings

NASA Technical Reports Server (NTRS)

Frederick, Martin E.; Jermakian, Joel B.

1993-01-01

Microprocessor-controlled dc-to-dc power converters devised to maximize power transferred from solar photovoltaic strings to storage batteries and other electrical loads. Converters help in utilizing large solar photovoltaic arrays most effectively with respect to cost, size, and weight. Main points of invention are: single controller used to control and optimize any number of "dumb" tracker units and strings independently; power maximized out of converters; and controller in system is microprocessor.

Power Corrupts, but Control Does Not: What Stands Behind the Effects of Holding High Positions.

PubMed

Cislak, Aleksandra; Cichocka, Aleksandra; Wojcik, Adrian Dominik; Frankowska, Natalia

2018-06-01

People seek high positions not to gain influence over others but to satisfy their need for personal control. Personal control tends to have positive interpersonal consequences. If this is the case, does power indeed corrupt? We argue that holding a high position is associated both with perceptions of power (influence over others) and personal control (influence over one's life). Three studies showed that these two aspects might have opposite consequences: Power over others positively predicted aggressiveness (Study 1, N = 793) and exploitativeness (Study 2, N = 445), whereas personal control predicted these outcomes negatively. In Study 3 ( N = 557), conducted among employees at various organizational positions, the effects of holding a high position on exploitativeness and aggressiveness were differentially mediated by power over others and personal control. We discuss these findings in light of contradicting evidence on the corruptive effects of power.

Power Corrupts, but Control Does Not: What Stands Behind the Effects of Holding High Positions

PubMed Central

Cichocka, Aleksandra; Wojcik, Adrian Dominik; Frankowska, Natalia

2018-01-01

People seek high positions not to gain influence over others but to satisfy their need for personal control. Personal control tends to have positive interpersonal consequences. If this is the case, does power indeed corrupt? We argue that holding a high position is associated both with perceptions of power (influence over others) and personal control (influence over one’s life). Three studies showed that these two aspects might have opposite consequences: Power over others positively predicted aggressiveness (Study 1, N = 793) and exploitativeness (Study 2, N = 445), whereas personal control predicted these outcomes negatively. In Study 3 (N = 557), conducted among employees at various organizational positions, the effects of holding a high position on exploitativeness and aggressiveness were differentially mediated by power over others and personal control. We discuss these findings in light of contradicting evidence on the corruptive effects of power. PMID:29484921

Piezoelectric Power Requirements for Active Vibration Control

NASA Technical Reports Server (NTRS)

Brennan, Matthew C.; McGowan, Anna-Maria Rivas

1997-01-01

This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate that for a perfectly-controlled system, the power consumption is a function of the quantity and type of piezoelectric actuators and the voltage and frequency of the control law output signal. Furthermore, as control effectiveness decreases, the power consumption of the piezoelectric actuators decreases. In addition, experimental results revealed a non-linear behavior in the material properties of piezoelectric actuators. The material non- linearity displayed a significant increase in capacitance with an increase in excitation voltage. Tests show that if the non-linearity of the capacitance was accounted for, a conservative estimate of the power can easily be determined.

Analysis and Experimental Verification of New Power Flow Control for Grid-Connected Inverter with LCL Filter in Microgrid

PubMed Central

Gu, Herong; Guan, Yajuan; Wang, Huaibao; Wei, Baoze; Guo, Xiaoqiang

2014-01-01

Microgrid is an effective way to integrate the distributed energy resources into the utility networks. One of the most important issues is the power flow control of grid-connected voltage-source inverter in microgrid. In this paper, the small-signal model of the power flow control for the grid-connected inverter is established, from which it can be observed that the conventional power flow control may suffer from the poor damping and slow transient response. While the new power flow control can mitigate these problems without affecting the steady-state power flow regulation. Results of continuous-domain simulations in MATLAB and digital control experiments based on a 32-bit fixed-point TMS320F2812 DSP are in good agreement, which verify the small signal model analysis and effectiveness of the proposed method. PMID:24672304

System and method for advanced power management

DOEpatents

Atcitty, Stanley [Albuquerque, NM; Symons, Philip C [Surprise, AZ; Butler, Paul C [Albuquerque, NM; Corey, Garth P [Albuquerque, NM

2009-07-28

A power management system is provided that includes a power supply means comprising a plurality of power supply strings, a testing means operably connected to said plurality of power supply strings for evaluating performance characteristics of said plurality of power supply strings, and a control means for monitoring power requirements and comprising a switching means for controlling switching of said plurality of power supply strings to said testing means.

Finite Control Set Model Predictive Control for Multiple Distributed Generators Microgrids

NASA Astrophysics Data System (ADS)

Babqi, Abdulrahman Jamal

This dissertation proposes two control strategies for AC microgrids that consist of multiple distributed generators (DGs). The control strategies are valid for both grid-connected and islanded modes of operation. In general, microgrid can operate as a stand-alone system (i.e., islanded mode) or while it is connected to the utility grid (i.e., grid connected mode). To enhance the performance of a micrgorid, a sophisticated control scheme should be employed. The control strategies of microgrids can be divided into primary and secondary controls. The primary control regulates the output active and reactive powers of each DG in grid-connected mode as well as the output voltage and frequency of each DG in islanded mode. The secondary control is responsible for regulating the microgrid voltage and frequency in the islanded mode. Moreover, it provides power sharing schemes among the DGs. In other words, the secondary control specifies the set points (i.e. reference values) for the primary controllers. In this dissertation, Finite Control Set Model Predictive Control (FCS-MPC) was proposed for controlling microgrids. FCS-MPC was used as the primary controller to regulate the output power of each DG (in the grid-connected mode) or the voltage of the point of DG coupling (in the islanded mode of operation). In the grid-connected mode, Direct Power Model Predictive Control (DPMPC) was implemented to manage the power flow between each DG and the utility grid. In the islanded mode, Voltage Model Predictive Control (VMPC), as the primary control, and droop control, as the secondary control, were employed to control the output voltage of each DG and system frequency. The controller was equipped with a supplementary current limiting technique in order to limit the output current of each DG in abnormal incidents. The control approach also enabled smooth transition between the two modes. The performance of the control strategy was investigated and verified using PSCAD/EMTDC software platform. This dissertation also proposes a control and power sharing strategy for small-scale microgrids in both grid-connected and islanded modes based on centralized FCS-MPC. In grid-connected mode, the controller was capable of managing the output power of each DG and enabling flexible power regulation between the microgrid and the utility grid. In islanded mode, the controller regulated the microgrid voltage and frequency, and provided a precise power sharing scheme among the DGs. In addition, the power sharing can be adjusted flexibly by changing the sharing ratio. The proposed control also enabled plug-and-play operation. Moreover, a smooth transition between the two modes of operation was achieved without any disturbance in the system. Case studies were carried out in order to validate the proposed control strategy with the PSCAD/EMTDA software package.

Model-free adaptive control of advanced power plants

DOEpatents

Cheng, George Shu-Xing; Mulkey, Steven L.; Wang, Qiang

2015-08-18

A novel 3-Input-3-Output (3.times.3) Model-Free Adaptive (MFA) controller with a set of artificial neural networks as part of the controller is introduced. A 3.times.3 MFA control system using the inventive 3.times.3 MFA controller is described to control key process variables including Power, Steam Throttle Pressure, and Steam Temperature of boiler-turbine-generator (BTG) units in conventional and advanced power plants. Those advanced power plants may comprise Once-Through Supercritical (OTSC) Boilers, Circulating Fluidized-Bed (CFB) Boilers, and Once-Through Supercritical Circulating Fluidized-Bed (OTSC CFB) Boilers.

Substation Reactive Power Regulation Strategy

NASA Astrophysics Data System (ADS)

Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

2018-01-01

With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

Experimental evaluation of open-loop UpLink Power Control using ACTS

NASA Technical Reports Server (NTRS)

Dissanayake, Asoka

1995-01-01

The present investigation deals with the implementation of open-loop up-link power control using a beacon signal in the down-link frequency band as the control parameter. A power control system was developed and tested using the ACTS satellite. ACTS carries beacon signals in both up- and down-link bands with which the relationship between the up- and down-link fading can be established. A power controlled carrier was transmitted to the ACTS satellite from a NASA operated ground station and the transponded signal was received at COMSAT Laboratories using a terminal that was routinely used to monitor the two ACTS beacon signals. The experiment ran for a period of approximately six months and the collected data were used to evaluate the performance of the power control system. A brief review of propagation factors involved in estimating the up-link fade using a beacon signal in the down-link band are presented. The power controller design and the experiment configuration are discussed. Results of the experiment are discussed.

Effect of accuracy of wind power prediction on power system operator

NASA Technical Reports Server (NTRS)

Schlueter, R. A.; Sigari, G.; Costi, T.

1985-01-01

This research project proposed a modified unit commitment that schedules connection and disconnection of generating units in response to load. A modified generation control is also proposed that controls steam units under automatic generation control, fast responding diesels, gas turbines and hydro units under a feedforward control, and wind turbine array output under a closed loop array control. This modified generation control and unit commitment require prediction of trend wind power variation one hour ahead and the prediction of error in this trend wind power prediction one half hour ahead. An improved meter for predicting trend wind speed variation is developed. Methods for accurately simulating the wind array power from a limited number of wind speed prediction records was developed. Finally, two methods for predicting the error in the trend wind power prediction were developed. This research provides a foundation for testing and evaluating the modified unit commitment and generation control that was developed to maintain operating reliability at a greatly reduced overall production cost for utilities with wind generation capacity.

Feedback Power Control Strategies in Wireless Sensor Networks with Joint Channel Decoding

PubMed Central

Abrardo, Andrea; Ferrari, Gianluigi; Martalò, Marco; Perna, Fabio

2009-01-01

In this paper, we derive feedback power control strategies for block-faded multiple access schemes with correlated sources and joint channel decoding (JCD). In particular, upon the derivation of the feasible signal-to-noise ratio (SNR) region for the considered multiple access schemes, i.e., the multidimensional SNR region where error-free communications are, in principle, possible, two feedback power control strategies are proposed: (i) a classical feedback power control strategy, which aims at equalizing all link SNRs at the access point (AP), and (ii) an innovative optimized feedback power control strategy, which tries to make the network operational point fall in the feasible SNR region at the lowest overall transmit energy consumption. These strategies will be referred to as “balanced SNR” and “unbalanced SNR,” respectively. While they require, in principle, an unlimited power control range at the sources, we also propose practical versions with a limited power control range. We preliminary consider a scenario with orthogonal links and ideal feedback. Then, we analyze the robustness of the proposed power control strategies to possible non-idealities, in terms of residual multiple access interference and noisy feedback channels. Finally, we successfully apply the proposed feedback power control strategies to a limiting case of the class of considered multiple access schemes, namely a central estimating officer (CEO) scenario, where the sensors observe noisy versions of a common binary information sequence and the AP's goal is to estimate this sequence by properly fusing the soft-output information output by the JCD algorithm. PMID:22291536

Speed And Power Control Of An Engine By Modulation Of The Load Torque

DOEpatents

Ziph, Benjamin; Strodtman, Scott; Rose, Thomas K

1999-01-26

A system and method of speed and power control for an engine in which speed and power of the engine is controlled by modulation of the load torque. The load torque is manipulated in order to cause engine speed, and hence power to be changed. To accomplish such control, the load torque undergoes a temporary excursion in the opposite direction of the desired speed and power change. The engine and the driven equipment will accelerate or decelerate accordingly as the load torque is decreased or increased, relative to the essentially fixed or constant engine torque. As the engine accelerates or decelerates, its power increases or decreases in proportion.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hessell, Steven M.; Morris, Robert L.; McGrogan, Sean W.

A powertrain including an engine and torque machines is configured to transfer torque through a multi-mode transmission to an output member. A method for controlling the powertrain includes employing a closed-loop speed control system to control torque commands for the torque machines in response to a desired input speed. Upon approaching a power limit of a power storage device transferring power to the torque machines, power limited torque commands are determined for the torque machines in response to the power limit and the closed-loop speed control system is employed to determine an engine torque command in response to the desiredmore » input speed and the power limited torque commands for the torque machines.« less

Control of Vibratory Energy Harvesters in the Presence of Nonlinearities and Power-Flow Constraints

NASA Astrophysics Data System (ADS)

Cassidy, Ian L.

Over the past decade, a significant amount of research activity has been devoted to developing electromechanical systems that can convert ambient mechanical vibrations into usable electric power. Such systems, referred to as vibratory energy harvesters, have a number of useful of applications, ranging in scale from self-powered wireless sensors for structural health monitoring in bridges and buildings to energy harvesting from ocean waves. One of the most challenging aspects of this technology concerns the efficient extraction and transmission of power from transducer to storage. Maximizing the rate of power extraction from vibratory energy harvesters is further complicated by the stochastic nature of the disturbance. The primary purpose of this dissertation is to develop feedback control algorithms which optimize the average power generated from stochastically-excited vibratory energy harvesters. This dissertation will illustrate the performance of various controllers using two vibratory energy harvesting systems: an electromagnetic transducer embedded within a flexible structure, and a piezoelectric bimorph cantilever beam. Compared with piezoelectric systems, large-scale electromagnetic systems have received much less attention in the literature despite their ability to generate power at the watt--kilowatt scale. Motivated by this observation, the first part of this dissertation focuses on developing an experimentally validated predictive model of an actively controlled electromagnetic transducer. Following this experimental analysis, linear-quadratic-Gaussian control theory is used to compute unconstrained state feedback controllers for two ideal vibratory energy harvesting systems. This theory is then augmented to account for competing objectives, nonlinearities in the harvester dynamics, and non-quadratic transmission loss models in the electronics. In many vibratory energy harvesting applications, employing a bi-directional power electronic drive to actively control the harvester is infeasible due to the high levels of parasitic power required to operate the drive. For the case where a single-directional drive is used, a constraint on the directionality of power-flow is imposed on the system, which necessitates the use of nonlinear feedback. As such, a sub-optimal controller for power-flow-constrained vibratory energy harvesters is presented, which is analytically guaranteed to outperform the optimal static admittance controller. Finally, the last section of this dissertation explores a numerical approach to compute optimal discretized control manifolds for systems with power-flow constraints. Unlike the sub-optimal nonlinear controller, the numerical controller satisfies the necessary conditions for optimality by solving the stochastic Hamilton-Jacobi equation.

Design and application of a new control system for tokamak ECRH power supply

NASA Astrophysics Data System (ADS)

Hao, Xu; Zhang, Jian; Huang, Yiyun

2016-03-01

The biggest challenge of designing and building tokamak electron cyclotron resonance heating (ECRH) pulse step modulation (PSM) power supply is satisfying its required output voltage rising time to be less than 100 µs while suppressing the voltage overshoot to be no more than 1%. To fulfill the two requirements, a new control strategy with startup time in microsecond range is proposed in this paper, and a new control system to realize the control strategy is introduced. The control system was built and tested on 60 kV/50 A ECRH power supply. The experimental results indicate that the control system can restrain the overshoot effectively, increase response speed, and obviously improve the dynamic characteristics of the PSM power supply system. Thus, the proposed control system helps the PSM power supply to meet the design specifications.

Comparative Study of Standards for Grid-Connected Wind Power Plant in China and the U.S.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Wenzhong; Tian, Tian; Muljadi, Eduard

2015-10-06

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPP) is crucial to ensuring the safe and stable operation of the electric power grid. The standards for grid-connected WPPs in China and the United States are compared in this paper to facilitate further improvements to the standards and enhance the development of wind power equipment. Detailed analyses in power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhance themore » understanding of grid codes in the two largest markets of wind power.« less

A new topology and control method for electromagnetic transmitter power supplies

NASA Astrophysics Data System (ADS)

Zhang, Yiming; Zhang, Jialin; Yuan, Dakang

2017-04-01

As essential equipment for electromagnetic exploration, electromagnetic transmitter reverse the steady power supply with desired frequency and transmit the power through grounding electrodes. To obtain effective geophysical data during deep exploration, the transmitter needs to be high-voltage, high-current, with high-accuracy output, and yet compact and light. The researches on the power supply technologies for high-voltage high-power electromagnetic transmitter is of significant importance to the deep geophysical explorations. Therefore, the performance of electromagnetic transmitter is mainly subject to the following two aspects: the performance of emission current and voltage, and the power density. These requirements bring technical difficulties to the development of power supplies. Conventionally, high-frequency switching power supplies are applied in the design of a high-power transmitter power supply. However, the structure of the topology is complicate, which may reduce the controllability of the output voltage and the reliability of the system. Without power factor control, the power factor of the structure is relatively low. Moreover high switching frequency causes high loss. With the development of the PWM (pulse width modulation) technique, its merits of simple structure, low loss, convenient control and unit power factor have made it popular in electrical energy feedback, active filter, and power factor compensation. Studies have shown that using PWM converters and space vector modulation have become the trend in designing transmitter power supply. However, the earth load exhibits different impedances at different frequencies. Thus ensuing high-accuracy and a stable output from a transmitter power supply in harsh environment has become a key topic in the design of geophysical exploration instruments. Based on SVPWM technology, an electromagnetic transmitter power supply has been designed and its control strategy has been studied. The transmitting system is composed of power supply, SVPWM converter, and power inverter units. The functions of the units are as follows: (1) power supply: a generator providing power with three phase; (2) SVPWM converter: convert AC to DC output; (3) power inverter unit: the inverter is used to convert DC to AC output whose frequency, amplitude and waveform are variable. In the SVPWM technique, the active current and the reactive current are controlled separately, and each variable is analyzed individually, thus the power factor of the system is improved. Through controlling the PWM converter at the generation side, we can get any power factor. Usually the power factor of the generation side is set to 1. Finally, simulation and experimental results validate both the correctness of the established model and the effectiveness of the control method. We can acquire unity power factor for the input and steady current for the output. They also demonstrated that the electromagnetic transmitter power supply designed in this study can meet the practical needs of field geological exploration. We can improve the utilization of the transmitter system.

Advanced Aircraft Electrical System Control Technology Demonstrator. Phase I. Requirements Analysis and Conceptual Design.

DTIC Science & Technology

1981-07-01

System 13 (7) Flight Critical Power 15 (8) Power Bus Configuration 16 b. System Control and Protection 20...includes the main buses, external power receptacles and distribution feeders. The function of the distribution protection system * is mainly to provide...TechnicaI rea Manager Power Systems Branch Power Systems B nch Aerospace Power Division Aerospace Power Division FOR .AKE D . REAMS Chief,

Thermal control system for Space Station Freedom photovoltaic power module

NASA Technical Reports Server (NTRS)

Hacha, Thomas H.; Howard, Laura

1994-01-01

The electric power for Space Station Freedom (SSF) is generated by the solar arrays of the photovoltaic power modules (PVM's) and conditioned, controlled, and distributed by a power management and distribution system. The PVM's are located outboard of the alpha gimbals of SSF. A single-phase thermal control system is being developed to provide thermal control of PVM electrical equipment and energy storage batteries. This system uses ammonia as the coolant and a direct-flow deployable radiator. The description and development status of the PVM thermal control system is presented.

Thermal control system for Space Station Freedom photovoltaic power module

NASA Technical Reports Server (NTRS)

Hacha, Thomas H.; Howard, Laura S.

1992-01-01

The electric power for Space Station Freedom (SSF) is generated by the solar arrays of the photovoltaic power modules (PVM's) and conditioned, controlled, and distributed by a power management and distribution system. The PVM's are located outboard of the alpha gimbals of SSF. A single-phase thermal control system is being developed to provide thermal control of PVM electrical equipment and energy storage batteries. This system uses ammonia as the coolant and a direct-flow deployable radiator. This paper presents the description and development status of the PVM thermal control system.

How to Integrate Variable Power Source into a Power Grid

NASA Astrophysics Data System (ADS)

Asano, Hiroshi

This paper discusses how to integrate variable power source such as wind power and photovoltaic generation into a power grid. The intermittent renewable generation is expected to penetrate for less carbon intensive power supply system, but it causes voltage control problem in the distribution system, and supply-demand imbalance problem in a whole power system. Cooperative control of customers' energy storage equipment such as water heater with storage tank for reducing inverse power flow from the roof-top PV system, the operation technique using a battery system and the solar radiation forecast for stabilizing output of variable generation, smart charging of plug-in hybrid electric vehicles for load frequency control (LFC), and other methods to integrate variable power source with improving social benefits are surveyed.

A MPPT Algorithm Based PV System Connected to Single Phase Voltage Controlled Grid

NASA Astrophysics Data System (ADS)

Sreekanth, G.; Narender Reddy, N.; Durga Prasad, A.; Nagendrababu, V.

2012-10-01

Future ancillary services provided by photovoltaic (PV) systems could facilitate their penetration in power systems. In addition, low-power PV systems can be designed to improve the power quality. This paper presents a single-phase PV systemthat provides grid voltage support and compensation of harmonic distortion at the point of common coupling thanks to a repetitive controller. The power provided by the PV panels is controlled by a Maximum Power Point Tracking algorithm based on the incremental conductance method specifically modified to control the phase of the PV inverter voltage. Simulation and experimental results validate the presented solution.

Fuzzy Logic Based Controller for a Grid-Connected Solid Oxide Fuel Cell Power Plant.

PubMed

Chatterjee, Kalyan; Shankar, Ravi; Kumar, Amit

2014-10-01

This paper describes a mathematical model of a solid oxide fuel cell (SOFC) power plant integrated in a multimachine power system. The utilization factor of a fuel stack maintains steady state by tuning the fuel valve in the fuel processor at a rate proportional to a current drawn from the fuel stack. A suitable fuzzy logic control is used for the overall system, its objective being controlling the current drawn by the power conditioning unit and meet a desirable output power demand. The proposed control scheme is verified through computer simulations.

A New Control Method to Mitigate Power Fluctuations for Grid Integrated PV/Wind Hybrid Power System Using Ultracapacitors

NASA Astrophysics Data System (ADS)

Jayalakshmi, N. S.; Gaonkar, D. N.

2016-08-01

The output power obtained from solar-wind hybrid system fluctuates with changes in weather conditions. These power fluctuations cause adverse effects on the voltage, frequency and transient stability of the utility grid. In this paper, a control method is presented for power smoothing of grid integrated PV/wind hybrid system using ultracapacitors in a DC coupled structure. The power fluctuations of hybrid system are mitigated and smoothed power is supplied to the utility grid. In this work both photovoltaic (PV) panels and the wind generator are controlled to operate at their maximum power point. The grid side inverter control strategy presented in this paper maintains DC link voltage constant while injecting power to the grid at unity power factor considering different operating conditions. Actual solar irradiation and wind speed data are used in this study to evaluate the performance of the developed system using MATLAB/Simulink software. The simulation results show that output power fluctuations of solar-wind hybrid system can be significantly mitigated using the ultracapacitor based storage system.

Adaptive control paradigm for photovoltaic and solid oxide fuel cell in a grid-integrated hybrid renewable energy system.

PubMed

Mumtaz, Sidra; Khan, Laiq

2017-01-01

The hybrid power system (HPS) is an emerging power generation scheme due to the plentiful availability of renewable energy sources. Renewable energy sources are characterized as highly intermittent in nature due to meteorological conditions, while the domestic load also behaves in a quite uncertain manner. In this scenario, to maintain the balance between generation and load, the development of an intelligent and adaptive control algorithm has preoccupied power engineers and researchers. This paper proposes a Hermite wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control of photovoltaic (PV) systems to extract maximum power and a Hermite wavelet incorporated NeuroFuzzy indirect adaptive control of Solid Oxide Fuel Cells (SOFC) to obtain a swift response in a grid-connected hybrid power system. A comprehensive simulation testbed for a grid-connected hybrid power system (wind turbine, PV cells, SOFC, electrolyzer, battery storage system, supercapacitor (SC), micro-turbine (MT) and domestic load) is developed in Matlab/Simulink. The robustness and superiority of the proposed indirect adaptive control paradigm are evaluated through simulation results in a grid-connected hybrid power system testbed by comparison with a conventional PI (proportional and integral) control system. The simulation results verify the effectiveness of the proposed control paradigm.

Adaptive control paradigm for photovoltaic and solid oxide fuel cell in a grid-integrated hybrid renewable energy system

PubMed Central

Khan, Laiq

2017-01-01

The hybrid power system (HPS) is an emerging power generation scheme due to the plentiful availability of renewable energy sources. Renewable energy sources are characterized as highly intermittent in nature due to meteorological conditions, while the domestic load also behaves in a quite uncertain manner. In this scenario, to maintain the balance between generation and load, the development of an intelligent and adaptive control algorithm has preoccupied power engineers and researchers. This paper proposes a Hermite wavelet embedded NeuroFuzzy indirect adaptive MPPT (maximum power point tracking) control of photovoltaic (PV) systems to extract maximum power and a Hermite wavelet incorporated NeuroFuzzy indirect adaptive control of Solid Oxide Fuel Cells (SOFC) to obtain a swift response in a grid-connected hybrid power system. A comprehensive simulation testbed for a grid-connected hybrid power system (wind turbine, PV cells, SOFC, electrolyzer, battery storage system, supercapacitor (SC), micro-turbine (MT) and domestic load) is developed in Matlab/Simulink. The robustness and superiority of the proposed indirect adaptive control paradigm are evaluated through simulation results in a grid-connected hybrid power system testbed by comparison with a conventional PI (proportional and integral) control system. The simulation results verify the effectiveness of the proposed control paradigm. PMID:28329015

Multi-port power router and its impact on resilient power grid systems

NASA Astrophysics Data System (ADS)

Kado, Yuichi; Iwatsuki, Katsumi; Wada, Keiji

2016-02-01

We propose a Y-configuration power router as a unit cell to easily construct a power delivery system that can meet many types of user requirements. The Y-configuration power router controls the direction and magnitude of power flow among three ports regardless of DC and AC. We constructed a prototype three-way isolated DC/DC converter that is the core unit of the Y-configuration power router and tested the power flow control operation. Experimental results revealed that our methodology based on the governing equation was appropriate for the power flow control of the three-way DC/DC converter. In addition, the hexagonal distribution network composed of the power routers has the ability to easily interchange electric power between autonomous microgrid cells. We also explored the requirements for communication between energy routers to achieve dynamic adjustments of energy flow in a coordinated manner and its impact on resilient power grid systems.

Photonic-powered cable assembly

DOEpatents

Sanderson, Stephen N.; Appel, Titus James; Wrye, IV, Walter C.

2013-01-22

A photonic-cable assembly includes a power source cable connector ("PSCC") coupled to a power receive cable connector ("PRCC") via a fiber cable. The PSCC electrically connects to a first electronic device and houses a photonic power source and an optical data transmitter. The fiber cable includes an optical transmit data path coupled to the optical data transmitter, an optical power path coupled to the photonic power source, and an optical feedback path coupled to provide feedback control to the photonic power source. The PRCC electrically connects to a second electronic device and houses an optical data receiver coupled to the optical transmit data path, a feedback controller coupled to the optical feedback path to control the photonic power source, and a photonic power converter coupled to the optical power path to convert photonic energy received over the optical power path to electrical energy to power components of the PRCC.

Photonic-powered cable assembly

DOEpatents

Sanderson, Stephen N; Appel, Titus James; Wrye, IV, Walter C

2014-06-24

A photonic-cable assembly includes a power source cable connector ("PSCC") coupled to a power receive cable connector ("PRCC") via a fiber cable. The PSCC electrically connects to a first electronic device and houses a photonic power source and an optical data transmitter. The fiber cable includes an optical transmit data path coupled to the optical data transmitter, an optical power path coupled to the photonic power source, and an optical feedback path coupled to provide feedback control to the photonic power source. The PRCC electrically connects to a second electronic device and houses an optical data receiver coupled to the optical transmit data path, a feedback controller coupled to the optical feedback path to control the photonic power source, and a photonic power converter coupled to the optical power path to convert photonic energy received over the optical power path to electrical energy to power components of the PRCC.

Comparison of Photovoltaic Energy Systems for the Solar Village

DTIC Science & Technology

1988-08-01

power -point-trackIng ( MPPT ) for the array. It also Includes AC and DC contactors, an isolation transformer, and a control system that fully automates...the day when the array is producing power , the battery controller uses excess array power , not needed for household use , to recharge the batteries. As...alone design) The battery controller used Is the Balance of System Specialists, Inc. Power Control Series model *8104820 rated at 48 volt, 20 amp. This

Alternate energy source usage for in situ heat treatment processes

DOEpatents

Stone, Jr., Francis Marion; Goodwin, Charles R [League City, TX; Richard, Jr., James

2011-03-22

Systems, methods, and heaters for treating a subsurface formation are described herein. At least one system for providing power to one or more subsurface heaters is described herein. The system may include an intermittent power source; a transformer coupled to the intermittent power source, and a tap controller coupled to the transformer. The transformer may be configured to transform power from the intermittent power source to power with appropriate operating parameters for the heaters. The tap controller may be configured to monitor and control the transformer so that a constant voltage is provided to the heaters from the transformer regardless of the load of the heaters and the power output provided by the intermittent power source.

Impact of Offshore Wind Power Integrated by VSC-HVDC on Power Angle Stability of Power Systems

NASA Astrophysics Data System (ADS)

Lu, Haiyang; Tang, Xisheng

2017-05-01

Offshore wind farm connected to grid by VSC-HVDC loses frequency support for power system, so adding frequency control in wind farm and VSC-HVDC system is an effective measure, but it will change wind farm VSC-HVDC’s transient stability on power system. Through theoretical analysis, concluding the relationship between equivalent mechanical power and electromagnetic power of two-machine system with the active power of wind farm VSC-HVDC, then analyzing the impact of wind farm VSC-HVDC with or without frequency control and different frequency control parameters on angle stability of synchronous machine by EEAC. The validity of theoretical analysis has been demonstrated through simulation in PSCAD/EMTDC.