Sample records for certification procedure-determining engine

  1. 40 CFR 91.115 - Certification procedure-determining engine power and engine families.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engine power and engine families. 91.115 Section 91.115 Protection of Environment ENVIRONMENTAL... ENGINES Emission Standards and Certification Provisions § 91.115 Certification procedure—determining engine power and engine families. (a) Engine power must be calculated using SAE J1228. This procedure has...

  2. 40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

  3. 40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

  4. 40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

  5. 40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

  6. 40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

  7. 49 CFR 240.207 - Procedures for making the determination on vision and hearing acuity.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... writing that the person can safely operate without using the device. [56 FR 28254, June 19, 1991, as... 49 Transportation 4 2014-10-01 2014-10-01 false Procedures for making the determination on vision... CERTIFICATION OF LOCOMOTIVE ENGINEERS Implementation of the Certification Process § 240.207 Procedures for...

  8. 49 CFR 240.207 - Procedures for making the determination on vision and hearing acuity.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... writing that the person can safely operate without using the device. [56 FR 28254, June 19, 1991, as... 49 Transportation 4 2012-10-01 2012-10-01 false Procedures for making the determination on vision... CERTIFICATION OF LOCOMOTIVE ENGINEERS Implementation of the Certification Process § 240.207 Procedures for...

  9. 49 CFR 240.207 - Procedures for making the determination on vision and hearing acuity.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... writing that the person can safely operate without using the device. [56 FR 28254, June 19, 1991, as... 49 Transportation 4 2013-10-01 2013-10-01 false Procedures for making the determination on vision... CERTIFICATION OF LOCOMOTIVE ENGINEERS Implementation of the Certification Process § 240.207 Procedures for...

  10. 40 CFR 91.118 - Certification procedure-testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... difference between the old FEL and the new FEL; and that the new FEL applies to all engines covered by the... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification... test engine using the specified test procedures and appropriate test cycle. All test results must be...

  11. 40 CFR 91.118 - Certification procedure-testing.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... difference between the old FEL and the new FEL; and that the new FEL applies to all engines covered by the... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification... test engine using the specified test procedures and appropriate test cycle. All test results must be...

  12. 40 CFR 91.118 - Certification procedure-testing.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... difference between the old FEL and the new FEL; and that the new FEL applies to all engines covered by the... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification... test engine using the specified test procedures and appropriate test cycle. All test results must be...

  13. 40 CFR 91.118 - Certification procedure-testing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... difference between the old FEL and the new FEL; and that the new FEL applies to all engines covered by the... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification... test engine using the specified test procedures and appropriate test cycle. All test results must be...

  14. 40 CFR 91.118 - Certification procedure-testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... difference between the old FEL and the new FEL; and that the new FEL applies to all engines covered by the... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification... test engine using the specified test procedures and appropriate test cycle. All test results must be...

  15. 40 CFR 91.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... description of the origin and buildup of the engine, steps taken to insure that it is representative of... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification Provisions § 91.121 Certification procedure—recordkeeping. (a) The engine manufacturer must...

  16. 7 CFR 1724.32 - Inspection and certification of work order construction.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

  17. 7 CFR 1724.32 - Inspection and certification of work order construction.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

  18. 7 CFR 1724.32 - Inspection and certification of work order construction.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

  19. 40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... The manufacturer shall select one emission data engine based on the highest fuel feed per stroke... service accumulation time determined by the manufacturer to result in stabilized emissions. The emission...

  20. 40 CFR 92.215 - Maintenance of records; submittal of information; right of entry.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES... procedures used to test each such certification locomotive or certification locomotive engine. (iv) A copy of... history of each locomotive or locomotive engine used for certification under this subpart including: (A...

  1. 40 CFR 92.215 - Maintenance of records; submittal of information; right of entry.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES... procedures used to test each such certification locomotive or certification locomotive engine. (iv) A copy of... history of each locomotive or locomotive engine used for certification under this subpart including: (A...

  2. 40 CFR 92.215 - Maintenance of records; submittal of information; right of entry.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES... procedures used to test each such certification locomotive or certification locomotive engine. (iv) A copy of... history of each locomotive or locomotive engine used for certification under this subpart including: (A...

  3. Final Rule for Standards for Emissions From Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Motor Vehicles and Motor Vehicle Engines, and Certification Procedures for Aftermarket Conversions

    EPA Pesticide Factsheets

    This rule provides emission standards and test procedures for the certification of new natural gasfueled, and liquefied petroleum gasfueled light-duty vehicles, light-duty trucks, heavy-duty engines and vehicles, and motorcycles.

  4. 46 CFR 126.470 - Marine-engineering systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Marine-engineering systems. 126.470 Section 126.470... CERTIFICATION Inspection for Certification § 126.470 Marine-engineering systems. The inspection procedures for marine-engineering systems contained in subchapter F of this chapter apply. ...

  5. 46 CFR 126.470 - Marine-engineering systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Marine-engineering systems. 126.470 Section 126.470... CERTIFICATION Inspection for Certification § 126.470 Marine-engineering systems. The inspection procedures for marine-engineering systems contained in subchapter F of this chapter apply. ...

  6. 46 CFR 126.470 - Marine-engineering systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Marine-engineering systems. 126.470 Section 126.470... CERTIFICATION Inspection for Certification § 126.470 Marine-engineering systems. The inspection procedures for marine-engineering systems contained in subchapter F of this chapter apply. ...

  7. 46 CFR 126.470 - Marine-engineering systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Marine-engineering systems. 126.470 Section 126.470... CERTIFICATION Inspection for Certification § 126.470 Marine-engineering systems. The inspection procedures for marine-engineering systems contained in subchapter F of this chapter apply. ...

  8. 46 CFR 126.470 - Marine-engineering systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Marine-engineering systems. 126.470 Section 126.470... CERTIFICATION Inspection for Certification § 126.470 Marine-engineering systems. The inspection procedures for marine-engineering systems contained in subchapter F of this chapter apply. ...

  9. 7 CFR 1753.94 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... accept the certification only for matters within the staff engineer's area of specialization. In such... certification coordinator. (b) Certification borrowers, shall submit and obtain RUS approval of a work plan before construction and related engineering begin. (1) The work plan shall provide a description of the...

  10. 46 CFR 189.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Marine engineering equipment. 189.25-35 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-35 Marine engineering equipment. (a) For inspection procedures of Marine Engineering equipment and systems, see Subchapter F (Marine Engineering) of...

  11. 46 CFR 91.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Marine engineering equipment. 91.25-35 Section 91.25-35... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of...

  12. 46 CFR 91.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Marine engineering equipment. 91.25-35 Section 91.25-35... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of...

  13. 46 CFR 189.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Marine engineering equipment. 189.25-35 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-35 Marine engineering equipment. (a) For inspection procedures of Marine Engineering equipment and systems, see Subchapter F (Marine Engineering) of...

  14. 46 CFR 91.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Marine engineering equipment. 91.25-35 Section 91.25-35... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of...

  15. 46 CFR 189.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Marine engineering equipment. 189.25-35 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-35 Marine engineering equipment. (a) For inspection procedures of Marine Engineering equipment and systems, see Subchapter F (Marine Engineering) of...

  16. 46 CFR 189.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Marine engineering equipment. 189.25-35 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-35 Marine engineering equipment. (a) For inspection procedures of Marine Engineering equipment and systems, see Subchapter F (Marine Engineering) of...

  17. 46 CFR 91.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Marine engineering equipment. 91.25-35 Section 91.25-35... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of...

  18. 46 CFR 189.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Marine engineering equipment. 189.25-35 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-35 Marine engineering equipment. (a) For inspection procedures of Marine Engineering equipment and systems, see Subchapter F (Marine Engineering) of...

  19. 46 CFR 91.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Marine engineering equipment. 91.25-35 Section 91.25-35... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of...

  20. Powertrain Test Procedure Development for EPA GHG Certification of Medium- and Heavy-Duty Engines and Vehicles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chambon, Paul H.; Deter, Dean D.

    2016-07-01

    xiii ABSTRACT The goal of this project is to develop and evaluate powertrain test procedures that can accurately simulate real-world operating conditions, and to determine greenhouse gas (GHG) emissions of advanced medium- and heavy-duty engine and vehicle technologies. ORNL used their Vehicle System Integration Laboratory to evaluate test procedures on a stand-alone engine as well as two powertrains. Those components where subjected to various drive cycles and vehicle conditions to evaluate the validity of the results over a broad range of test conditions. Overall, more than 1000 tests were performed. The data are compiled and analyzed in this report.

  1. 46 CFR 189.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...

  2. 46 CFR 91.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...

  3. 46 CFR 91.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...

  4. 46 CFR 91.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...

  5. 46 CFR 91.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...

  6. 46 CFR 189.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...

  7. 46 CFR 189.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...

  8. 46 CFR 189.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...

  9. 46 CFR 189.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Electrical engineering equipment. 189.25-30 Section 189... VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-30 Electrical engineering equipment. (a) For inspection procedures of Electrical Engineering equipment and systems, see Subchapter J...

  10. 46 CFR 91.25-30 - Electrical engineering equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Electrical engineering equipment. 91.25-30 Section 91.25... INSPECTION AND CERTIFICATION Inspection for Certification § 91.25-30 Electrical engineering equipment. For inspection procedures of electrical engineering equipment and systems see subchapter J (Electrical...

  11. 40 CFR 90.114 - Requirement of certification-engine information label.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... nomenclature and abbreviations provided in the Society of Automotive Engineers procedure J1930, “Electrical... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Requirement of certification-engine...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19...

  12. Application for certification 1980 model year light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  13. Application for certification, 1990 model-year light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  14. Application for certification 1993 model year light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  15. Application for certification, 1991 model-year light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model-year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  16. Application for certification 1981 model year light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  17. Application for certification 1987 model year light-duty vehicles - Peugeot

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. The engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. They also provide information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  18. Application for certification 1981 model year light-duty vehicles - Peugeot

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  19. Application for certification, 1988 model year light-duty vehicles - Volkswagen, Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission-control systems. Information is also provided on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  20. Application for certification, 1986 model year light-duty vehicles - Volkswagen/Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  1. Application for certification, 1993 model-year light-duty trucks - Grumman Olson

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty trucks from Grumman Olson Company. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirementsmore » to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  2. Application for certification, 1992 model-year light-duty vehicles - Grumman Olson

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines that he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of themore » application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  3. Application for certification, 1990 model-year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  4. Application for certification, 1989 model year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  5. 40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... vehicles (or engines) covered by the certificate (the manufacturers' sales data book or advertising... Administrator shall notify the manufacturer in writing of his intention to deny certification, setting forth the...

  6. Applicability of NASA (ARC) two-segment approach procedures to Boeing Aircraft

    NASA Technical Reports Server (NTRS)

    Allison, R. L.

    1974-01-01

    An engineering study to determine the feasibility of applying the NASA (ARC) two-segment approach procedures and avionics to the Boeing fleet of commercial jet transports is presented. This feasibility study is concerned with the speed/path control and systems compability aspects of the procedures. Path performance data are provided for representative Boeing 707/727/737/747 passenger models. Thrust margin requirements for speed/path control are analyzed for still air and shearing tailwind conditions. Certification of the two-segment equipment and possible effects on existing airplane certification are discussed. Operational restrictions on use of the procedures with current autothrottles and in icing or reported tailwind conditions are recommended. Using the NASA/UAL 727 procedures as a baseline, maximum upper glide slopes for representative 707/727/737/747 models are defined as a starting point for further study and/or flight evaluation programs.

  7. 40 CFR 90.119 - Certification procedure-testing.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., removal, disassembly, cleaning, or replacement on a test engine without the advance approval of the... (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission.... The manufacturer must test the test engine using the specified test procedures and appropriate test...

  8. 40 CFR 90.119 - Certification procedure-testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., removal, disassembly, cleaning, or replacement on a test engine without the advance approval of the... (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission.... The manufacturer must test the test engine using the specified test procedures and appropriate test...

  9. 40 CFR 90.119 - Certification procedure-testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., removal, disassembly, cleaning, or replacement on a test engine without the advance approval of the... (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission.... The manufacturer must test the test engine using the specified test procedures and appropriate test...

  10. 40 CFR 90.119 - Certification procedure-testing.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., removal, disassembly, cleaning, or replacement on a test engine without the advance approval of the... (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission.... The manufacturer must test the test engine using the specified test procedures and appropriate test...

  11. Application for certification, 1991 model year light-duty vehicles - Sports Car America, Puma Division Inc

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty vehicles from Sports Car America, PUMA Division Incorporated. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, andmore » proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

  12. Certification of the Cessna 152 on 100% ethanol

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shauck, M.E.; Zanin, M.G.

    1997-12-31

    In June 1996, the Renewable Aviation Fuels Development Center (RAFDC) at Baylor University in Waco, Texas, received a Supplemental Type Certificate (STC) for the use of 100% ethanol as a fuel for the Cessna 152, the most popular training aircraft in the world. This is the first certification granted by the Federal Aviation Administration (FAA) for a non-petroleum fuel. Certification of an aircraft on a new fuel requires a certification of the engine followed by a certification of the airframe/engine combination. This paper will describe the FAA airframe certification procedure, the tests required and their outcome using ethanol as anmore » aviation fuel in a Cessna 152.« less

  13. 75 FR 8056 - California State Nonroad Engine Pollution Control Standards; California New Nonroad Compression...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... maintenance intervals, recordkeeping, warranties, test procedures, certification test fuel, and engine useful... Control of Emissions of Air Pollution From Nonroad Diesel Engines and Fuel and EPA's Final Rule for Test... request for an authorization of its emission standards and accompanying test procedures for new nonroad...

  14. FAA Rotorcraft Research, Engineering, and Development Bibliography, 1962-1988. Supplement

    DTIC Science & Technology

    1989-03-01

    fires, the aircraft engine was the major fire origin for twin- and single- engine air - craft. Only in single- engine aircraft was the instrument panel a...Certification Issues. The topics of Operational Requirements, Procedures, Air - worthiness and Engineering Capabilities are discussed. Volume II presents the...Issues. The topics of Operational Requirements, Procedures, Air - worthiness and Engineering Capabilities are discussed. Volume II presents the operator

  15. 75 FR 37311 - Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-29

    ... maximum time interval between any engine run-ups from idle and the minimum ambient temperature associated with that run-up interval. This limitation is necessary because we do not currently have any specific requirements for run-up procedures for engine ground operation in icing conditions. The engine run-up procedure...

  16. 40 CFR 86.1439 - Certification Short Test emission test procedures-EPA.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Certification Short Test emission test procedures-EPA. 86.1439 Section 86.1439 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission Regulations for New...

  17. 40 CFR 86.1439 - Certification Short Test emission test procedures-EPA.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Certification Short Test emission test procedures-EPA. 86.1439 Section 86.1439 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission Regulations for New...

  18. 75 FR 61352 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-30, DC-10-30F, DC-10-30F (KC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-05

    ...: Samuel Lee, Aerospace Engineer, Propulsion Branch, ANM-140L, FAA, Los Angeles Aircraft Certification... procedures found in 14 CFR 39.19. Send information to ATTN: Samuel Lee, Aerospace Engineer, Propulsion Branch..., Propulsion Branch, ANM-140L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard...

  19. 40 CFR 90.118 - Certification procedure-service accumulation and usage of deterioration factors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... recommended lubrication and filter changes, may be performed during service accumulation without the... on the test engine(s). (e) For purposes of establishing whether Phase 2 engines comply with...

  20. Control of Parts Shipped Prior to Type Certificate Issuance

    DOT National Transportation Integrated Search

    1991-10-21

    This order prescribes the responsibilities and procedures for Federal Aviation Administration (FAA) Directorate personnel to review and evaluate proposals for control of parts shipped in advance of type certification of a new aircraft, aircraft engin...

  1. 77 FR 37283 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-21

    ... INFORMATION CONTACT: Rose Len, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller...; email: rose[email protected] . SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed... air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds...

  2. 32 CFR 766.8 - Procedure for review, approval, execution and distribution of aviation facility licenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CIVIL AIRCRAFT § 766.8 Procedure for review, approval, execution and distribution of aviation facility... license and Certificate of Insurance to the Commander, Naval Facilities Engineering Command or his... Facilities Engineering Command or his designated representative. (1) Upon receipt, the Commander, Naval...

  3. 40 CFR 90.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the engine, steps taken to insure that it is representative of production engines, description of... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS... engine manufacturer must maintain the following adequately organized records: (1) Copies of all...

  4. 14 CFR 21.502 - Approval of materials, parts, and appliances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Approval of Engines, Propellers... N—Acceptance of Aircraft Engines, Propellers, and Articles for Import § 21.500 Acceptance of aircraft engines and propellers. An aircraft engine or propeller manufactured in a foreign country or...

  5. 46 CFR 71.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Marine engineering equipment. 71.25-35 Section 71.25-35... CERTIFICATION Annual Inspection § 71.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F. (Marine Engineering) of this chapter. (b) [Reserved] ...

  6. 46 CFR 71.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Marine engineering equipment. 71.25-35 Section 71.25-35... CERTIFICATION Annual Inspection § 71.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F. (Marine Engineering) of this chapter. (b) [Reserved] ...

  7. 46 CFR 71.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Marine engineering equipment. 71.25-35 Section 71.25-35... CERTIFICATION Annual Inspection § 71.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F. (Marine Engineering) of this chapter. (b) [Reserved] ...

  8. 46 CFR 71.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Marine engineering equipment. 71.25-35 Section 71.25-35... CERTIFICATION Annual Inspection § 71.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F. (Marine Engineering) of this chapter. (b) [Reserved] ...

  9. 46 CFR 71.25-35 - Marine engineering equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Marine engineering equipment. 71.25-35 Section 71.25-35... CERTIFICATION Annual Inspection § 71.25-35 Marine engineering equipment. (a) For inspection procedures of marine engineering equipment and systems, see subchapter F. (Marine Engineering) of this chapter. (b) [Reserved] ...

  10. 14 CFR 21.11 - Applicability.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Applicability. 21.11 Section 21.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION...) Procedural requirements for the issue of type certificates for aircraft, aircraft engines, and propellers...

  11. 14 CFR 21.11 - Applicability.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Applicability. 21.11 Section 21.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION...) Procedural requirements for the issue of type certificates for aircraft, aircraft engines, and propellers...

  12. 14 CFR 21.11 - Applicability.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Applicability. 21.11 Section 21.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION...) Procedural requirements for the issue of type certificates for aircraft, aircraft engines, and propellers...

  13. 14 CFR 21.11 - Applicability.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Applicability. 21.11 Section 21.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION...) Procedural requirements for the issue of type certificates for aircraft, aircraft engines, and propellers...

  14. 14 CFR 21.11 - Applicability.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Applicability. 21.11 Section 21.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION...) Procedural requirements for the issue of type certificates for aircraft, aircraft engines, and propellers...

  15. Application for certification for 1979 model year for light-duty vehicles - Audi

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

  16. Application for certification for 1979 model year for light-duty vehicles - Peugeot

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

  17. 29 CFR 1956.23 - Procedures for certification of completion of development and determination on application of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and determination on application of criteria. 1956.23 Section 1956.23 Labor Regulations Relating to... Approval Procedures § 1956.23 Procedures for certification of completion of development and determination... basis of actual operations, the criteria set forth in §§ 1956.10 and 1956.11 of this part are being...

  18. 28 CFR 36.605 - Procedure following preliminary denial of certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Local Building Codes § 36.605 Procedure following preliminary denial of certification. (a) If the Assistant Attorney General makes a preliminary determination to deny certification of a code under § 36.603... specification of the manner in which the code could be amended in order to qualify for certification. (b) The...

  19. 28 CFR 36.605 - Procedure following preliminary denial of certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Local Building Codes § 36.605 Procedure following preliminary denial of certification. (a) If the Assistant Attorney General makes a preliminary determination to deny certification of a code under § 36.603... specification of the manner in which the code could be amended in order to qualify for certification. (b) The...

  20. 28 CFR 36.605 - Procedure following preliminary denial of certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Local Building Codes § 36.605 Procedure following preliminary denial of certification. (a) If the Assistant Attorney General makes a preliminary determination to deny certification of a code under § 36.603... specification of the manner in which the code could be amended in order to qualify for certification. (b) The...

  1. 28 CFR 36.605 - Procedure following preliminary denial of certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Local Building Codes § 36.605 Procedure following preliminary denial of certification. (a) If the Assistant Attorney General makes a preliminary determination to deny certification of a code under § 36.603... specification of the manner in which the code could be amended in order to qualify for certification. (b) The...

  2. 28 CFR 36.606 - Procedure following preliminary denial of certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Local Building Codes § 36.606 Procedure following preliminary denial of certification. (a) If the Assistant Attorney General makes a Preliminary determination to deny certification of a code under § 36.604... specification of the manner in which the code could be amended in order to qualify for certification. (b) The...

  3. 40 CFR 85.1406 - Certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-use engine that is newly rebuilt to its original configuration. (b) Diesel test fuel. Federally... used is the heavy-duty engine Federal Test Procedure as set forth in the applicable portions of part 86... provide some level of particulate emission reduction, and will not cause the urban bus engine to fail to...

  4. 40 CFR 85.1406 - Certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-use engine that is newly rebuilt to its original configuration. (b) Diesel test fuel. Federally... used is the heavy-duty engine Federal Test Procedure as set forth in the applicable portions of part 86... provide some level of particulate emission reduction, and will not cause the urban bus engine to fail to...

  5. 40 CFR 85.1406 - Certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-use engine that is newly rebuilt to its original configuration. (b) Diesel test fuel. Federally... used is the heavy-duty engine Federal Test Procedure as set forth in the applicable portions of part 86... provide some level of particulate emission reduction, and will not cause the urban bus engine to fail to...

  6. 40 CFR 85.1406 - Certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-use engine that is newly rebuilt to its original configuration. (b) Diesel test fuel. Federally... used is the heavy-duty engine Federal Test Procedure as set forth in the applicable portions of part 86... provide some level of particulate emission reduction, and will not cause the urban bus engine to fail to...

  7. Perceived Noise Analysis for Offset Jets Applied to Commercial Supersonic Aircraft

    NASA Technical Reports Server (NTRS)

    Huff, Dennis L.; Henderson, Brenda S.; Berton, Jeffrey J.; Seidel, Jonathan A.

    2016-01-01

    A systems analysis was performed with experimental jet noise data, engine/aircraft performance codes and aircraft noise prediction codes to assess takeoff noise levels and mission range for conceptual supersonic commercial aircraft. A parametric study was done to identify viable engine cycles that meet NASA's N+2 goals for noise and performance. Model scale data from offset jets were used as input to the aircraft noise prediction code to determine the expected sound levels for the lateral certification point where jet noise dominates over all other noise sources. The noise predictions were used to determine the optimal orientation of the offset nozzles to minimize the noise at the lateral microphone location. An alternative takeoff procedure called "programmed lapse rate" was evaluated for noise reduction benefits. Results show there are two types of engines that provide acceptable mission range performance; one is a conventional mixed-flow turbofan and the other is a three-stream variable-cycle engine. Separate flow offset nozzles reduce the noise directed toward the thicker side of the outer flow stream, but have less benefit as the core nozzle pressure ratio is reduced. At the systems level for a three-engine N+2 aircraft with full throttle takeoff, there is a 1.4 EPNdB margin to Chapter 3 noise regulations predicted for the lateral certification point (assuming jet noise dominates). With a 10% reduction in thrust just after clearing the runway, the margin increases to 5.5 EPNdB. Margins to Chapter 4 and Chapter 14 levels will depend on the cumulative split between the three certification points, but it appears that low specific thrust engines with a 10% reduction in thrust (programmed lapse rate) can come close to meeting Chapter 14 noise levels. Further noise reduction is possible with engine oversizing and derated takeoff, but more detailed mission studies are needed to investigate the range impacts as well as the practical limits for safety and takeoff regulations.

  8. [The certification of advanced therapy medicinal products. A quality label for product development in small and medium-sized enterprises].

    PubMed

    Berger, A; Schüle, S; Flory, E

    2011-07-01

    Advanced therapy medicinal products (ATMPs) are gene therapy, cell therapy, and tissue engineered products. To gain access to the market within the European Union, ATMPs must be authorized by the European Commission (EC). Especially for small and medium-sized enterprises (SMEs), the European centralized procedure of marketing authorization that is conducted by the European Medicines Agency (EMA) constitutes a major challenge, because SMEs often have little experience with regulatory procedures and many have limited financial possibilities. To tackle these challenges, a certification procedure exclusively for SMEs and their ATMP development was introduced by the EC. Independently from a marketing authorization application, development and/or production processes can be certified. An issued certificate demonstrates that the respective process meets the current regulatory and scientific requirements of the EMA, representing a valuable milestone for putative investors and licensees. This article highlights the background, the detailed procedure, the minimum requirements, as well as the costs of certification, while giving further noteworthy guidance for interested parties.

  9. 22 CFR 50.10 - Certificate of nationality.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Certificate of nationality. 50.10 Section 50.10 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of a Person Abroad § 50.10 Certificate of nationality. (a) Any person...

  10. 22 CFR 50.10 - Certificate of nationality.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Certificate of nationality. 50.10 Section 50.10 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of a Person Abroad § 50.10 Certificate of nationality. (a) Any person...

  11. 22 CFR 50.10 - Certificate of nationality.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Certificate of nationality. 50.10 Section 50.10 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of a Person Abroad § 50.10 Certificate of nationality. (a) Any person...

  12. 22 CFR 50.10 - Certificate of nationality.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certificate of nationality. 50.10 Section 50.10 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of a Person Abroad § 50.10 Certificate of nationality. (a) Any person...

  13. 22 CFR 50.10 - Certificate of nationality.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Certificate of nationality. 50.10 Section 50.10 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of a Person Abroad § 50.10 Certificate of nationality. (a) Any person...

  14. Actions to Void Certificates for Vehicle and Engines

    EPA Pesticide Factsheets

    n cases where EPA has determines that manufacturers have provided inaccurate, incomplete or falsified certification information or failed to keep required records, the Clean Air Act gives the EPA the authority to void certificates.

  15. 7 CFR 1753.39 - Closeout documents.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... amendments may be submitted to RUS with the engineer's contract closeout certification. (b) Taxes. Under the... equipment, material and software covered by the contracts. If any such tax is paid by the bidder, the... closeout procedure contained in RUS Contract Form 525, the borrower shall: (1) Obtain from the engineer a...

  16. 7 CFR 1753.39 - Closeout documents.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... amendments may be submitted to RUS with the engineer's contract closeout certification. (b) Taxes. Under the... equipment, material and software covered by the contracts. If any such tax is paid by the bidder, the... closeout procedure contained in RUS Contract Form 525, the borrower shall: (1) Obtain from the engineer a...

  17. 7 CFR 1753.39 - Closeout documents.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... amendments may be submitted to RUS with the engineer's contract closeout certification. (b) Taxes. Under the... equipment, material and software covered by the contracts. If any such tax is paid by the bidder, the... closeout procedure contained in RUS Contract Form 525, the borrower shall: (1) Obtain from the engineer a...

  18. 7 CFR 1753.39 - Closeout documents.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... amendments may be submitted to RUS with the engineer's contract closeout certification. (b) Taxes. Under the... equipment, material and software covered by the contracts. If any such tax is paid by the bidder, the... closeout procedure contained in RUS Contract Form 525, the borrower shall: (1) Obtain from the engineer a...

  19. Perceived Noise Analysis for Offset Jets Applied to Commercial Supersonic Aircraft

    NASA Technical Reports Server (NTRS)

    Huff, Dennis L.; Henderson, Brenda S.; Berton, Jeffrey J.; Seidel, Jonathan A.

    2016-01-01

    A systems analysis was performed with experimental jet noise data, engine/aircraft performance codes and aircraft noise prediction codes to assess takeoff noise levels and mission range for conceptual supersonic commercial aircraft. A parametric study was done to identify viable engine cycles that meet NASAs N+2 goals for noise and performance. Model scale data from offset jets was used as input to the aircraft noise prediction code to determine the expected sound levels for the lateral certification point where jet noise dominates over all other noise sources. The noise predictions were used to determine the optimal orientation of the offset nozzles to minimize the noise at the lateral microphone location. An alternative takeoff procedure called programmed lapse rate was evaluated for noise reduction benefits. Results show there are two types of engines that provide acceptable range performance; one is a standard mixed-flow turbofan with a single-stage fan, and the other is a three-stream variable-cycle engine with a multi-stage fan. The engine with a single-stage fan has a lower specific thrust and is 8 to 10 EPNdB quieter for takeoff. Offset nozzles reduce the noise directed toward the thicker side of the outer flow stream, but have less benefit as the core nozzle pressure ratio is reduced and the bypass-to-core area ratio increases. At the systems level for a three-engine N+2 aircraft with full throttle takeoff, there is a 1.4 EPNdB margin to Chapter 3 noise regulations predicted for the lateral certification point (assuming jet noise dominates). With a 10 reduction in thrust just after takeoff rotation, the margin increases to 5.5 EPNdB. Margins to Chapter 4 and Chapter 14 levels will depend on the cumulative split between the three certification points, but it appears that low specific thrust engines with a 10 reduction in thrust (programmed lapse rate) can come close to meeting Chapter 14 noise levels. Further noise reduction is possible with additional reduction in takeoff thrust using programmed lapse rate, but studies are needed to investigate the practical limits for safety and takeoff regulations.

  20. 40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

  1. 40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

  2. 40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

  3. 40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

  4. 40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

  5. 40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emission data engine based on the highest fuel feed per stroke, primarily at the speed of maximum rated... the manufacturer to result in stabilized emissions. The emission performance of the emission data...

  6. 40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... emission data engine based on the highest fuel feed per stroke, primarily at the speed of maximum rated... the manufacturer to result in stabilized emissions. The emission performance of the emission data...

  7. 47 CFR 73.5002 - Application and certification procedures; return of mutually exclusive applications not subject...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... broadcast service auctions, or to apply for a noncommercial educational station, as described in 47 U.S.C... engineering data contained in the appropriate FCC form (FCC Form 301, FCC Form 346, or FCC Form 349... permitted to resolve their mutual exclusivities by making amendments to their engineering submissions...

  8. Recalls of Vehicles and Engines

    EPA Pesticide Factsheets

    n cases where EPA has determines that manufacturers have provided inaccurate, incomplete or falsified certification information or failed to keep required records, the Clean Air Act gives the EPA the authority to void certificates.

  9. Prediction of noise constrained optimum takeoff procedures

    NASA Technical Reports Server (NTRS)

    Padula, S. L.

    1980-01-01

    An optimization method is used to predict safe, maximum-performance takeoff procedures which satisfy noise constraints at multiple observer locations. The takeoff flight is represented by two-degree-of-freedom dynamical equations with aircraft angle-of-attack and engine power setting as control functions. The engine thrust, mass flow and noise source parameters are assumed to be given functions of the engine power setting and aircraft Mach number. Effective Perceived Noise Levels at the observers are treated as functionals of the control functions. The method is demonstrated by applying it to an Advanced Supersonic Transport aircraft design. The results indicate that automated takeoff procedures (continuously varying controls) can be used to significantly reduce community and certification noise without jeopardizing safety or degrading performance.

  10. Certification of lightning protection for a full-authority digital engine control

    NASA Technical Reports Server (NTRS)

    Dargi, M.; Rupke, E.; Wiles, K.

    1991-01-01

    FADEC systems present many challenges to the lightning protection engineer. Verification of the protection-design adequacy for certification purposes presents additional challenges. The basic requirements of the certification plan of a FADEC is to demonstrate compliance with Federal Airworthiness Regulations (FAR) 25.1309 and 25.581. These FARs are intended for transport aircraft, but there are equivalent sections for general aviation aircraft, normal and transport rotorcraft. Military aircraft may have additional requirements. The criteria for demonstration of adequate lightning protection for a FADEC systems include the procedures outlined in FAA Advisory Circular (AC) 20-136, Protection of aircraft electrical/electronic systems against the indirect effects of lightning. As FADEC systems, including the interconnecting wiring, are generally not susceptible to direct attachment of lightning currents, the verification of protection against indirect effects is primarily described.

  11. Jet Engine Bird Ingestion Simulations: Comparison of Rotating to Non-Rotating Fan Blades

    NASA Technical Reports Server (NTRS)

    Howard, Samuel A.; Hammer, Jeremiah; Carney, Kelly S.; Pereira, J. Michael

    2013-01-01

    Bird strike events in commercial airliners are a fairly common occurrence. According to data collected by the US Department of Agriculture, over 80,000 bird strikes were reported in the period 1990-2007 in the US alone [1]. As a result, bird ingestion is an important factor in aero engine design and FAA certification. When it comes to bird impacts on engine fan blades, the FAA requires full-scale bird ingestion tests on an engine running at full speed to pass certification requirements. These rotating tests are complex and very expensive. To reduce development costs associated with new materials for fan blades, it is desirable to develop more cost effective testing procedures than full-scale rotating engine tests for material evaluation. An impact test on a non-rotating single blade that captures most of the salient physics of the rotating test would go a long way towards enabling large numbers of evaluative material screening tests. NASA Glenn Research Center has been working to identify a static blade test procedure that would be effective at reproducing similar results as seen in rotating tests. The current effort compares analytical simulations of a bird strike on various nonrotating blades to a bird strike simulation on a rotating blade as a baseline case. Several different concepts for simulating the rotating loads on a non-rotating blade were analyzed with little success in duplicating the deformation results seen in the rotating case. The rotating blade behaves as if it were stiffer than the non-rotating blade resulting in less plastic deformation from a given bird impact. The key factor limiting the success of the non-rotating blade simulations is thought to be the effect of gyroscopics. Prior to this effort, it was anticipated the difficulty would be in matching the pre-stress in the blade due to centrifugal forces Additional work is needed to verify this assertion, and to determine if a static test procedure can simulate the gyroscopic effects in a suitable manner. This paper describes the various non-rotating concepts analyzed, and demonstrates the effect believed to be gyroscopic in nature on the results.

  12. Jet Engine Bird Ingestion Simulations: Comparison of Rotating to Non-Rotating Fan Blades

    NASA Technical Reports Server (NTRS)

    Howard, Samuel A.; Hammer, Jeremiah T.; Carney, Kelly S.; Pereira, J. Michael

    2013-01-01

    Bird strike events in commercial airliners are a fairly common occurrence. According to data collected by the US Department of Agriculture, over 80,000 bird strikes were reported in the period 1990 to 2007 in the US alone (Ref. 1). As a result, bird ingestion is an important factor in aero engine design and FAA certification. When it comes to bird impacts on engine fan blades, the FAA requires full-scale bird ingestion tests on an engine running at full speed to pass certification requirements. These rotating tests are complex and very expensive. To reduce development costs associated with new materials for fan blades, it is desirable to develop more cost effective testing procedures than full-scale rotating engine tests for material evaluation. An impact test on a nonrotating single blade that captures most of the salient physics of the rotating test would go a long way towards enabling large numbers of evaluative material screening tests. NASA Glenn Research Center has been working to identify a static blade test procedure that would be effective at reproducing similar results as seen in rotating tests. The current effort compares analytical simulations of a bird strike on various non-rotating blades to a bird strike simulation on a rotating blade as a baseline case. Several different concepts for simulating the rotating loads on a non-rotating blade were analyzed with little success in duplicating the deformation results seen in the rotating case. The rotating blade behaves as if it were stiffer than the non-rotating blade resulting in less plastic deformation from a given bird impact. The key factor limiting the success of the non-rotating blade simulations is thought to be the effect of gyroscopics. Prior to this effort, it was anticipated the difficulty would be in matching the prestress in the blade due to centrifugal forces Additional work is needed to verify this assertion, and to determine if a static test procedure can simulate the gyroscopic effects in a suitable manner. This paper describes the various non-rotating concepts analyzed, and demonstrates the effect believed to be gyroscopic in nature on the results

  13. Legal basis of the Advanced Therapies Regulation.

    PubMed

    Jekerle, V; Schröder, C; Pedone, E

    2010-01-01

    Advanced therapy medicinal products consist of gene therapy, somatic cell therapy and tissue engineered products. Due to their specific manufacturing process and mode of action these products require specially tailored legislation. With Regulation (EC) No. 1394/2007, these needs have been met. Definitions of gene therapy, somatic cell therapy and tissue engineered products were laid down. A new committee, the Committee for Advanced Therapies, was founded, special procedures such as the certification procedure for small- and medium-sized enterprises were established and the technical requirements for Marketing Authorisation Applications (quality, non-clinical and clinical) were revised.

  14. 49 CFR Appendix C to Part 240 - Procedures for Obtaining and Evaluating Motor Vehicle Driving Record Data

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Vehicle Driving Record Data C Appendix C to Part 240 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Pt. 240, App. C Appendix C to Part 240—Procedures for Obtaining and... provisions of the National Driver Register Act (23 U.S.C. 401 note). Under that statute, state motor vehicle...

  15. 49 CFR Appendix C to Part 240 - Procedures for Obtaining and Evaluating Motor Vehicle Driving Record Data

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Vehicle Driving Record Data C Appendix C to Part 240 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Pt. 240, App. C Appendix C to Part 240—Procedures for Obtaining and... provisions of the National Driver Register Act (23 U.S.C. 401 note). Under that statute, state motor vehicle...

  16. 49 CFR Appendix C to Part 240 - Procedures for Obtaining and Evaluating Motor Vehicle Driving Record Data

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Vehicle Driving Record Data C Appendix C to Part 240 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Pt. 240, App. C Appendix C to Part 240—Procedures for Obtaining and... provisions of the National Driver Register Act (23 U.S.C. 401 note). Under that statute, state motor vehicle...

  17. 76 FR 66347 - Agency Information Collection Activities; Requests for Comments: Clearance of Renewed Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-26

    ... Certification Procedures for Changed Products AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice... determining the certification basis for aeronautical products. This process is intended to increase safety by... Certification Office by an aircraft/product manufacturer/modifier. Respondents: Approximately 2,558...

  18. 78 FR 58160 - Certification Process for State Capital Counsel System

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-23

    ... make such independent assessments in the context of making certification decisions under chapter 154... decisions concerning the objectives of representation,'' ABA Model Rule 1.2(a), making it difficult to... certification procedures. The Attorney General determined that chapter 154 gave him greater discretion in making...

  19. 22 CFR 50.11 - Certificate of identity for travel to the United States to apply for admission.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Certificate of identity for travel to the United States to apply for admission. 50.11 Section 50.11 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of...

  20. 22 CFR 50.11 - Certificate of identity for travel to the United States to apply for admission.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Certificate of identity for travel to the United States to apply for admission. 50.11 Section 50.11 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of...

  1. 22 CFR 50.11 - Certificate of identity for travel to the United States to apply for admission.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certificate of identity for travel to the United States to apply for admission. 50.11 Section 50.11 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of...

  2. 22 CFR 50.11 - Certificate of identity for travel to the United States to apply for admission.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Certificate of identity for travel to the United States to apply for admission. 50.11 Section 50.11 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of...

  3. 22 CFR 50.11 - Certificate of identity for travel to the United States to apply for admission.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Certificate of identity for travel to the United States to apply for admission. 50.11 Section 50.11 Foreign Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES Procedures for Determination of United States Nationality of...

  4. Determination of Passing Scores on Certification Examinations: An Unresolved Issue.

    ERIC Educational Resources Information Center

    Karni, Karen R.; Lofsness, Karen G.

    1985-01-01

    This study examined the results obtained from certification applicants and practitioners on a national certification examination for clinical laboratory scientists (medical technologists), using a modified Angoff procedure to establish the cut-off score. The major question of the investigation concerned whether the cut-off score was appropriate.…

  5. 14 CFR 121.915 - Continuing qualification curriculum.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... in all tasks, procedures and subjects required in accordance with the approved program documentation, as follows: (i) For pilots in command, seconds in command, and flight engineers, First Look in accordance with the certificate holder's FAA-approved program documentation. (ii) For pilots in command...

  6. 10 CFR 431.20 - Department of Energy recognition of nationally recognized certification programs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... certification programs. 431.20 Section 431.20 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY... Incorporated and Methods of Determining Efficiency § 431.20 Department of Energy recognition of nationally... similar procedures and methodologies for determining the energy efficiency of electric motors. It must...

  7. 13 CFR 121.108 - What are the requirements for representing small business size status, and what are the penalties...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... determination may include the firm's internal management procedures governing size representation or certification, the clarity or ambiguity of the representation or certification requirement, and the efforts made to correct an incorrect or invalid representation or certification in a timely manner. An individual...

  8. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  9. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  10. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

  11. Software Certification - Coding, Code, and Coders

    NASA Technical Reports Server (NTRS)

    Havelund, Klaus; Holzmann, Gerard J.

    2011-01-01

    We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

  12. Advanced Noise Abatement Procedures for a Supersonic Business Jet

    NASA Technical Reports Server (NTRS)

    Berton, Jeffrey J.; Jones, Scott M.; Seidel, Jonathan A.; Huff, Dennis L.

    2017-01-01

    Supersonic civil aircraft present a unique noise certification challenge. High specific thrust required for supersonic cruise results in high engine exhaust velocity and high levels of jet noise during takeoff. Aerodynamics of thin, low-aspect-ratio wings equipped with relatively simple flap systems deepen the challenge. Advanced noise abatement procedures have been proposed for supersonic aircraft. These procedures promise to reduce airport noise, but they may require departures from normal reference procedures defined in noise regulations. The subject of this report is a takeoff performance and noise assessment of a notional supersonic business jet. Analytical models of an airframe and a supersonic engine derived from a contemporary subsonic turbofan core are developed. These models are used to predict takeoff trajectories and noise. Results indicate advanced noise abatement takeoff procedures are helpful in reducing noise along lateral sidelines.

  13. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the... and geographical coverage to carry out all plan review and vessel survey activities associated with...

  14. 46 CFR 8.230 - Minimum standards for a recognized classification society.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the... and geographical coverage to carry out all plan review and vessel survey activities associated with...

  15. 40 CFR 90.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... engine manufacturer must maintain the following adequately organized records: (1) Copies of all applications filed with the Administrator; (2) A copy of all data obtained through the in-use testing program... of this section. (b) Routine emission test data, such as those reporting test cell temperature and...

  16. 40 CFR 90.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... engine manufacturer must maintain the following adequately organized records: (1) Copies of all applications filed with the Administrator; (2) A copy of all data obtained through the in-use testing program... of this section. (b) Routine emission test data, such as those reporting test cell temperature and...

  17. 40 CFR 90.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... engine manufacturer must maintain the following adequately organized records: (1) Copies of all applications filed with the Administrator; (2) A copy of all data obtained through the in-use testing program... of this section. (b) Routine emission test data, such as those reporting test cell temperature and...

  18. 40 CFR 90.121 - Certification procedure-recordkeeping.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... engine manufacturer must maintain the following adequately organized records: (1) Copies of all applications filed with the Administrator; (2) A copy of all data obtained through the in-use testing program... of this section. (b) Routine emission test data, such as those reporting test cell temperature and...

  19. Piloting considerations for terminal area operations of civil tiltwing and tiltrotor aircraft

    NASA Technical Reports Server (NTRS)

    Hindson, William S.; Hardy, Gordon H.; Tucker, George E.; Decker, William A.

    1993-01-01

    The existing body of research to investigate airworthiness, performance, handling, and operational requirements for STOL and V/STOL aircraft was reviewed for its applicability to the tiltrotor and tiltwing design concepts. The objective of this study was to help determine the needs for developing civil certification criteria for these aircraft concepts. Piloting tasks that were considered included configuration and thrust vector management, glidepath control, deceleration to hover, and engine failure procedures. Flight control and cockpit display systems that have been found necessary to exploit the low-speed operating characteristics of these aircraft are described, and beneficial future developments are proposed.

  20. 14 CFR 21.502 - Acceptance of articles.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Acceptance of articles. 21.502 Section 21... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Acceptance of Aircraft Engines, Propellers, and Articles for Import § 21.502 Acceptance of articles. An article (including an article produced under a letter of TSO...

  1. 14 CFR 21.502 - Acceptance of articles.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Acceptance of articles. 21.502 Section 21... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Acceptance of Aircraft Engines, Propellers, and Articles for Import § 21.502 Acceptance of articles. An article (including an article produced under a letter of TSO...

  2. 14 CFR 21.502 - Acceptance of articles.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Acceptance of articles. 21.502 Section 21... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Acceptance of Aircraft Engines, Propellers, and Articles for Import § 21.502 Acceptance of articles. An article (including an article produced under a letter of TSO...

  3. 14 CFR 21.502 - Acceptance of articles.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Acceptance of articles. 21.502 Section 21... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Acceptance of Aircraft Engines, Propellers, and Articles for Import § 21.502 Acceptance of articles. An article (including an article produced under a letter of TSO...

  4. 40 CFR 86.1838-01 - Small volume manufacturer certification procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... aggregated relationship, then each manufacturer may certify whole test groups whose total aggregated sales... sales in all states and territories of the United States, including all vehicles and engines imported... the aggregated sales in all states and territories of the United States of the manufacturer, as...

  5. 40 CFR 86.1838-01 - Small volume manufacturer certification procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... aggregated relationship, then each manufacturer may certify whole test groups whose total aggregated sales... sales in all states and territories of the United States, including all vehicles and engines imported... the aggregated sales in all states and territories of the United States of the manufacturer, as...

  6. 40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES General Provisions for Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles, Light...-Fueled, Liquefied Petroleum Gas-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.094-14 Small-volume...

  7. 42 CFR 493.43 - Application for registration certificate, certificate for provider-performed microscopy (PPM...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., certificate for provider-performed microscopy (PPM) procedures, and certificate of compliance. 493.43 Section... Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.43 Application for registration certificate, certificate for provider-performed microscopy (PPM) procedures, and certificate of...

  8. 42 CFR 493.43 - Application for registration certificate, certificate for provider-performed microscopy (PPM...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., certificate for provider-performed microscopy (PPM) procedures, and certificate of compliance. 493.43 Section... Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.43 Application for registration certificate, certificate for provider-performed microscopy (PPM) procedures, and certificate of...

  9. 42 CFR 493.43 - Application for registration certificate, certificate for provider-performed microscopy (PPM...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., certificate for provider-performed microscopy (PPM) procedures, and certificate of compliance. 493.43 Section... Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.43 Application for registration certificate, certificate for provider-performed microscopy (PPM) procedures, and certificate of...

  10. 42 CFR 493.43 - Application for registration certificate, certificate for provider-performed microscopy (PPM...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., certificate for provider-performed microscopy (PPM) procedures, and certificate of compliance. 493.43 Section... Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.43 Application for registration certificate, certificate for provider-performed microscopy (PPM) procedures, and certificate of...

  11. 42 CFR 493.43 - Application for registration certificate, certificate for provider-performed microscopy (PPM...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., certificate for provider-performed microscopy (PPM) procedures, and certificate of compliance. 493.43 Section... Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.43 Application for registration certificate, certificate for provider-performed microscopy (PPM) procedures, and certificate of...

  12. Laminar-airflow equipment certification: what the pharmacist needs to know.

    PubMed

    Bryan, D; Marback, R C

    1984-07-01

    The basic information pharmacy practitioners need to determine the suitability and applicability of laminar-airflow equipment test standards and procedures is presented. The operative guideline for any laminar-flow clean bench (LFCB) certification is the cleanroom and work station requirements for controlled environments as defined by the federal government under Federal Standard 209b (FS 209b). FS 209b outlines the tests, test procedures, and acceptable performance ranges for all LFCB equipment. National Sanitation Foundation Standard Number 49 (NSF 49) is used in the certification of biological-safety cabinets (BSCs). NSF 49 covers those aspects of safety, maintenance, performance, and testing that are unique BSCs. To monitor certification properly, practitioners should be familiar with these standards and the air-velocity profile, high-efficiency particulate air filter performance, noise output, light, and electrical test procedures. A review of the requisite knowledge, experience, and reputation of certifying agents is presented, along with an outline of all the necessary procedures, equipment, and documentation to be used in the process. A thorough test report should be issued upon unit certification. As pharmacy practitioners are responsible for all other aspects of quality assurance, they should also be capable of auditing these certifications to ensure the aseptic quality of products compounded in the laminar-airflow environment.

  13. A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

    NASA Technical Reports Server (NTRS)

    Grantham, W. D.; Smith, P. M.; Deal, P. L.

    1980-01-01

    Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

  14. Laboratory Validation of Four Black Carbon Measurement Methods for Determination of the Nonvolatile Particulate Matter (nvPM) Mass Emissions from Commercial Aircraft Engines

    EPA Science Inventory

    Four candidate black carbon (BC) measurement techniques have been identified by the SAE International E-31 Committee for possible use in determining nonvolatile particulate matter (nvPM) mass emissions during commercial aircraft engine certification. These techniques are carbon b...

  15. 20 CFR 655.183 - Less than substantial violations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural... otherwise negative effect on the recruitment, employment, and retention of U.S. workers, the OFLC... certification determination. These special procedures may include special on-site positive recruitment and...

  16. 48 CFR 619.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Procedures. 619.602 Section 619.602 Federal Acquisition Regulations System DEPARTMENT OF STATE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Eligibility 619.602 Procedures. ...

  17. 48 CFR 2819.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Procedures. 2819.602 Section 2819.602 Federal Acquisition Regulations System DEPARTMENT OF JUSTICE Socioeconomic Programs SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Eligibility 2819.602 Procedures. ...

  18. 78 FR 44897 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-25

    ... Certification Office, FAA, may approve AMOCs to this AD. Use the procedures found in 14 CFR 39.19 to make your..., cleaning and inspections of the sleeve assembly splines, and replacement of the HMU if it fails inspection... for sending your comments electronically. Mail: Docket Management Facility, U.S. Department of...

  19. 78 FR 9001 - Airworthiness Directives; Hamilton Sundstrand Corporation Propellers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... Certification Office, FAA, may approve AMOCs for this AD. Use the procedures found in 14 CFR 39.19 to make your...) of auxiliary feathering pumps from service. We are proposing this AD to prevent propellers from failing to move into the feathering position after an engine in-flight shutdown. Propellers failing to...

  20. 40 CFR 86.1838-01 - Small-volume manufacturer certification procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES General Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks, and Complete Otto-Cycle Heavy-Duty Vehicles § 86.1838-01 Small-volume manufacturer...

  1. 40 CFR 80.165 - Certification test procedures and standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., “Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel.... The required test fuel must produce the accumulation of less than 100 mg of intake valve deposits on... Board, “Test Method for Evaluating Port Fuel Injector (PFI) Deposits in Vehicle Engines”, March 1, 1991...

  2. 40 CFR 80.165 - Certification test procedures and standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., “Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel.... The required test fuel must produce the accumulation of less than 100 mg of intake valve deposits on... Board, “Test Method for Evaluating Port Fuel Injector (PFI) Deposits in Vehicle Engines”, March 1, 1991...

  3. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

  4. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

  5. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

  6. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

  7. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

  8. Lightning Protection System for HE Facilities at LLNL - Certification Template

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clancy, T J; Ong, M M; Brown, C G

    2005-12-08

    This document is meant as a template to assist in the development of your own lighting certification process. Aside from this introduction and the mock representative name of the building (Building A), this document is nearly identical to a lightning certification report issued by the Engineering Directorate at Lawrence Livermore National Laboratory. At the date of this release, we have certified over 70 HE processing and storage cells at our Site 300 facilities. In Chapters 1 and 2 respectively, we address the need and methods of lightning certification for HE processing and storage facilities at LLNL. We present the preferredmore » method of lightning protection in Chapter 3, as well as the likely building modifications that are needed to comply with this method. In Chapter 4, we present the threat assessment and resulting safe work areas within a cell. After certification, there may be changes to operations during a lightning alert, and this is discussed in Chapter 5. Chapter 6 lists the maintenance requirements for the continuation of lighting certification status. Appendices of this document are meant as an aid in developing your own certification process, and they include a bonding list, an inventory of measurement equipment, surge suppressors in use at LLNL, an Integrated Work and Safety form (IWS), and a template certification sign-off sheet. The lightning certification process involves more that what is spelled out in this document. The first steps involve considerable planning, the securing of funds, and management and explosives safety buy-in. Permits must be obtained, measurement equipment must be assembled and tested, and engineers and technicians must be trained in their use. Cursory building inspections are also recommended, and surge suppression for power systems must be addressed. Upon completion of a certification report and its sign-off by management, additional work is required. Training will be needed in order to educate workers and facility managers of the requirements of lightning certification. Operating procedures will need to be generated and/or modified with additional controls. Engineering controls may also be implemented requiring the modification of cells. Careful planning should bring most of these issues to light, making it clear where this document is helpful and were additional assistance may be necessary.« less

  9. 77 FR 20051 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-03

    ... Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor Pursuant to... (``Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor''), in accordance with the ``Procedural Guidelines for the Maintenance of the List of Products Requiring Federal Contractor Certification...

  10. 78 FR 20503 - Airworthiness Directives; Pratt & Whitney Canada Corp. Turboprop Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-05

    ... Certification Office, FAA, may approve AMOCs to this AD. Use the procedures found in 14 CFR 39.19 to make your... proposed AD would require inspection of the 1st stage PT blades and the removal from service of those blades that fail the inspection or their replacement with blades eligible for installation. We are...

  11. 40 CFR 90.208 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Certification Averaging, Banking, and...: (1) Submit a statement that the engines for which certification is requested will not, to the best of... credits are calculated for the manufacturer's engine families. (2) Declare an FEL for each engine family...

  12. 40 CFR 90.114 - Requirement of certification-engine information label.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.114 Requirement of certification—engine... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Requirement of certification-engine...

  13. 40 CFR 90.114 - Requirement of certification-engine information label.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.114 Requirement of certification—engine... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Requirement of certification-engine...

  14. 40 CFR 90.114 - Requirement of certification-engine information label.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.114 Requirement of certification—engine... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Requirement of certification-engine...

  15. 40 CFR 90.114 - Requirement of certification-engine information label.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.114 Requirement of certification—engine... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Requirement of certification-engine...

  16. 42 CFR 493.1775 - Standard: Inspection of laboratories issued a certificate of waiver or a certificate for provider...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... certificate of waiver or a certificate for provider-performed microscopy procedures. 493.1775 Section 493.1775... laboratories issued a certificate of waiver or a certificate for provider-performed microscopy procedures. (a... microscopy procedures is not subject to biennial inspections. (b) If necessary, CMS or a CMS agent may...

  17. 42 CFR 493.1775 - Standard: Inspection of laboratories issued a certificate of waiver or a certificate for provider...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... certificate of waiver or a certificate for provider-performed microscopy procedures. 493.1775 Section 493.1775... laboratories issued a certificate of waiver or a certificate for provider-performed microscopy procedures. (a... microscopy procedures is not subject to biennial inspections. (b) If necessary, CMS or a CMS agent may...

  18. 42 CFR 493.1775 - Standard: Inspection of laboratories issued a certificate of waiver or a certificate for provider...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... certificate of waiver or a certificate for provider-performed microscopy procedures. 493.1775 Section 493.1775... laboratories issued a certificate of waiver or a certificate for provider-performed microscopy procedures. (a... microscopy procedures is not subject to biennial inspections. (b) If necessary, CMS or a CMS agent may...

  19. 42 CFR 493.1775 - Standard: Inspection of laboratories issued a certificate of waiver or a certificate for provider...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... certificate of waiver or a certificate for provider-performed microscopy procedures. 493.1775 Section 493.1775... laboratories issued a certificate of waiver or a certificate for provider-performed microscopy procedures. (a... microscopy procedures is not subject to biennial inspections. (b) If necessary, CMS or a CMS agent may...

  20. 42 CFR 493.1775 - Standard: Inspection of laboratories issued a certificate of waiver or a certificate for provider...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... certificate of waiver or a certificate for provider-performed microscopy procedures. 493.1775 Section 493.1775... laboratories issued a certificate of waiver or a certificate for provider-performed microscopy procedures. (a... microscopy procedures is not subject to biennial inspections. (b) If necessary, CMS or a CMS agent may...

  1. 78 FR 16779 - Type Certification Procedures for Changed Products

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-19

    ...-8994; Amdt. No. 21-96] RIN 2120-AK19 Type Certification Procedures for Changed Products AGENCY: Federal... requirements for the certification of changes to type-certificated products. The revision required the... entitled, ``Type Certification Procedures for Changed Products'' (December 4, 2012, 77 FR 71691). The 2000...

  2. 42 CFR 493.47 - Requirements for a certificate for provider-performed microscopy (PPM) procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-performed microscopy (PPM) procedures. 493.47 Section 493.47 Public Health CENTERS FOR MEDICARE & MEDICAID... REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.47 Requirements for a certificate for provider-performed microscopy (PPM...

  3. 42 CFR 493.47 - Requirements for a certificate for provider-performed microscopy (PPM) procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-performed microscopy (PPM) procedures. 493.47 Section 493.47 Public Health CENTERS FOR MEDICARE & MEDICAID... REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.47 Requirements for a certificate for provider-performed microscopy (PPM...

  4. 42 CFR 493.47 - Requirements for a certificate for provider-performed microscopy (PPM) procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-performed microscopy (PPM) procedures. 493.47 Section 493.47 Public Health CENTERS FOR MEDICARE & MEDICAID... REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.47 Requirements for a certificate for provider-performed microscopy (PPM...

  5. 42 CFR 493.47 - Requirements for a certificate for provider-performed microscopy (PPM) procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-performed microscopy (PPM) procedures. 493.47 Section 493.47 Public Health CENTERS FOR MEDICARE & MEDICAID... REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.47 Requirements for a certificate for provider-performed microscopy (PPM...

  6. 42 CFR 493.47 - Requirements for a certificate for provider-performed microscopy (PPM) procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-performed microscopy (PPM) procedures. 493.47 Section 493.47 Public Health CENTERS FOR MEDICARE & MEDICAID... REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy Procedures, and Certificate of Compliance § 493.47 Requirements for a certificate for provider-performed microscopy (PPM...

  7. 48 CFR 419.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Procedures. 419.602 Section 419.602 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Responsibility 419.602...

  8. 48 CFR 19.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Procedures. 19.602 Section 19.602 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Responsibility 19.602...

  9. 48 CFR 1319.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Procedures. 1319.602 Section 1319.602 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determination of Responsibility 1319.602...

  10. 76 FR 54528 - Standard Operating Procedures (SOP) of the Aircraft Certification Service (AIR) Process for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-01

    ...) of the Aircraft Certification Service (AIR) Process for the Sequencing of Certification and... on the Aircraft Certification Service (AIR) standard operating procedure (SOP) describing the process... comments on the SOP : AIR-100-001; Standard Operating Procedure--Aircraft Certification Service Project...

  11. 78 FR 9789 - Airworthiness Directives; Schweizer Aircraft Corporation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-12

    ... Certification Office, Engine & Propeller Directorate, 1600 Stewart Ave., suite 410, Westbury, NY 11590... inspection panel kit and stabilizer mount doublers. The Type Certificate for these helicopters transferred...: Stephen Kowalski, Aviation Safety Engineer, New York Aircraft Certification Office, Engine & Propeller...

  12. 14 CFR 61.415 - What are the limits of a flight instructor certificate with a sport pilot rating?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... determined the student's flight preparation, planning, equipment, and proposed procedures are adequate for... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false What are the limits of a flight instructor... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN CERTIFICATION: PILOTS, FLIGHT INSTRUCTORS, AND...

  13. 46 CFR 169.218 - Procedures for designating sailing school vessels.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Procedures for designating sailing school vessels. 169... SAILING SCHOOL VESSELS Inspection and Certification Letter of Designation § 169.218 Procedures for designating sailing school vessels. (a) Upon written request by a qualified institution, a determination is...

  14. 46 CFR 169.218 - Procedures for designating sailing school vessels.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Procedures for designating sailing school vessels. 169... SAILING SCHOOL VESSELS Inspection and Certification Letter of Designation § 169.218 Procedures for designating sailing school vessels. (a) Upon written request by a qualified institution, a determination is...

  15. 42 CFR 493.53 - Notification requirements for laboratories issued a certificate for provider-performed microscopy...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... certificate for provider-performed microscopy (PPM) procedures. 493.53 Section 493.53 Public Health CENTERS... CERTIFICATION LABORATORY REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy... certificate for provider-performed microscopy (PPM) procedures. Laboratories issued a certificate for PPM...

  16. 42 CFR 493.53 - Notification requirements for laboratories issued a certificate for provider-performed microscopy...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... certificate for provider-performed microscopy (PPM) procedures. 493.53 Section 493.53 Public Health CENTERS... CERTIFICATION LABORATORY REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy... certificate for provider-performed microscopy (PPM) procedures. Laboratories issued a certificate for PPM...

  17. 42 CFR 493.53 - Notification requirements for laboratories issued a certificate for provider-performed microscopy...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... certificate for provider-performed microscopy (PPM) procedures. 493.53 Section 493.53 Public Health CENTERS... CERTIFICATION LABORATORY REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy... certificate for provider-performed microscopy (PPM) procedures. Laboratories issued a certificate for PPM...

  18. 42 CFR 493.53 - Notification requirements for laboratories issued a certificate for provider-performed microscopy...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... certificate for provider-performed microscopy (PPM) procedures. 493.53 Section 493.53 Public Health CENTERS... CERTIFICATION LABORATORY REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy... certificate for provider-performed microscopy (PPM) procedures. Laboratories issued a certificate for PPM...

  19. 42 CFR 493.53 - Notification requirements for laboratories issued a certificate for provider-performed microscopy...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... certificate for provider-performed microscopy (PPM) procedures. 493.53 Section 493.53 Public Health CENTERS... CERTIFICATION LABORATORY REQUIREMENTS Registration Certificate, Certificate for Provider-performed Microscopy... certificate for provider-performed microscopy (PPM) procedures. Laboratories issued a certificate for PPM...

  20. 48 CFR 1419.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Procedures. 1419.602 Section 1419.602 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Responsibility 1419.602...

  1. 48 CFR 819.602 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Procedures. 819.602 Section 819.602 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Certificates of Competency and Determinations of Responsibility 819.602...

  2. 40 CFR 1033.340 - Suspension and revocation of certificates of conformity.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for an engine family as follows: (1) We may suspend the certificate of conformity for an engine family that is in noncompliance pursuant to § 1033.330(b), thirty days after the engine family is deemed to be... days after the engine family is deemed to be in noncompliance. (c) If we suspend your certificate of...

  3. 9 CFR 381.107 - Special procedures as to certification of poultry products for export to certain countries.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Special procedures as to certification...; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS... Procedures § 381.107 Special procedures as to certification of poultry products for export to certain...

  4. 40 CFR 92.208 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the construction of a locomotive or locomotive engine, where such step may reasonably be expected to... POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Certification Provisions § 92.208 Certification. (a) This paragraph (a) applies to manufacturers of new locomotives and new locomotive engines. If, after a review of...

  5. 40 CFR 1043.41 - EIAPP certification process.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

  6. 40 CFR 1043.41 - EIAPP certification process.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

  7. 40 CFR 1043.41 - EIAPP certification process.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

  8. 40 CFR 1043.41 - EIAPP certification process.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

  9. 40 CFR 1043.41 - EIAPP certification process.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

  10. Setting and Maintaining GCSE and GCE Grading Standards: The Case for Contextualised Cohort-Referencing

    ERIC Educational Resources Information Center

    Stringer, Neil Simon

    2012-01-01

    General Certificate of Secondary Education (GCSE) and General Certificate of Education (GCE) grading standards are determined by Awarding Bodies using procedures that adhere to the Code of Practice published by the regulator, Ofqual. Grade boundary marks (cut scores) are set using subject experts' (senior examiners) judgement of the quality of…

  11. 22 CFR 123.14 - Import certificate/delivery verification procedure.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.14 Import certificate/delivery verification procedure. (a) The Import Certificate/Delivery Verification Procedure is designed to assure that a commodity... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Import certificate/delivery verification...

  12. 22 CFR 123.14 - Import certificate/delivery verification procedure.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.14 Import certificate/delivery verification procedure. (a) The Import Certificate/Delivery Verification Procedure is designed to assure that a commodity... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Import certificate/delivery verification...

  13. Certification and Compliance for Nonroad Vehicles and Engines

    EPA Pesticide Factsheets

    Certification and compliance information for aircraft, all-terrain vehicles (ATVs) and dirt bikes, locomotives, marine compression-ignition (CI) engines, nonroad CI engines, nonroad spark (SI) engines, portable fuel containers, snowmobiles.

  14. 6 CFR 25.9 - Procedures for certification of approved products for Homeland Security.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Procedures for certification of approved products for Homeland Security. (a) Application Procedure. An applicant seeking a Certification of anti-terrorism Technology as an Approved Product for Homeland Security... application for renewal must be made using the “Application for Certification of an Approved Product for...

  15. Can Internet information on vertebroplasty be a reliable means of patient self-education?

    PubMed

    Sullivan, T Barrett; Anderson, Joshua T; Ahn, Uri M; Ahn, Nicholas U

    2014-05-01

    Studies of the quality and accuracy of health and medical information available on the Internet have shown that many sources provide inadequate information. However, to our knowledge, there are no published studies analyzing the quality of information available online regarding vertebroplasty. Because this has been a high-volume procedure with highly debated efficacy, it is critical that patients receive complete, accurate, and well-balanced information before deciding a treatment course. Additionally, few studies have evaluated the merit of academic site authorship or site certification on information quality, but some studies have used measurements of quality that are based primarily on subjective criteria or information accuracy rather than information completeness. The purposes of our study were (1) to evaluate and analyze the information on vertebroplasty available to the general public through the Internet; (2) to see if sites sponsored by academic institutions offered a higher quality of information; and (3) to determine whether quality of information varied according to site approval by a certification body. Three search engines were used to identify 105 web sites (35 per engine) offering information regarding vertebroplasty. Sites were evaluated for authorship/sponsorship, content, and references cited. Information quality was rated as "excellent," "high," "moderate," "low," or "unacceptable." Sites also were evaluated for contact information to set up an appointment. Data were analyzed as a complete set, then compared between authorship types, and finally evaluated by certification status. Academic sites were compared with other authorship groups and certified sites were compared with noncertified sites using Student's t-test. Appropriate indications were referenced in 74% of sites, whereas only 45% discussed a contraindication to the procedure. Benefits were expressed by 100% of sites, but risks were outlined in only 53% (p < 0.001). Ninety-nine percent of sites provided step-by-step descriptions of the procedure, and 44% of sites also included images. Alternative treatments were mentioned by 51% of sites. Twenty-seven percent of sites referenced peer-reviewed literature, 41% offered experiential or noncited data based on American populations, and 7% offered analogous data from international populations. Thirty percent of sites provided contact information for patient appointment scheduling. Seven percent of sites were classified as excellent quality, 6% as high quality, 11% as moderate quality, 19% as poor quality, and 57% as unacceptable. Sixteen percent of sites were sponsored by academic institutions, 62% by private groups, 8% by biomedical device companies, and 14% were sponsored otherwise. Academic sites reported fewer risks of the procedure than private sites or other sites (p = 0.05 and p = 0.04), but reported more risks than industry sites (p = 0.007). Academic sites were more likely than sites classified as other to offer contact information for patient appointment scheduling (p = 0.004). Nine percent of sites evaluated were Health on the Net Foundation (HONCode) certified. No association with improved information quality was observed in these sites relative to noncertified sites (all p > 0.05). Internet information regarding vertebroplasty is not only inadequate for proper patient education, but also potentially misleading as sites are more likely to present benefits of the procedure than risks. Although academic sites might be expected to offer higher-quality information than private, industry, or other sites, our data would suggest that they do not. HONCode certification cannot be used reliably as a means of qualifying website information quality. Academic sites should be expected to set a high standard and alter their Internet presence with adequate information distribution. Certification bodies also should alter their standards to necessitate provision of complete information in addition to emphasizing accurate information. Treating physicians may want to counsel their patients regarding the limitations of information present on the Internet and the pitfalls of current certification systems. Level IV, economic and decision analyses. See the Instructions for Authors for a complete description of levels of evidence.

  16. 78 FR 9005 - Airworthiness Directives; Dowty Propellers Propellers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA. For..., Aerospace Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller Directorate, 12 New... Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller Directorate, 12 New England...

  17. Certification of a weld produced by friction stir welding

    DOEpatents

    Obaditch, Chris; Grant, Glenn J

    2013-10-01

    Methods, devices, and systems for providing certification of friction stir welds are disclosed. A sensor is used to collect information related to a friction stir weld. Data from the sensor is compared to threshold values provided by an extrinsic standard setting organizations using a certification engine. The certification engine subsequently produces a report on the certification status of the weld.

  18. Apollo experience report: Guidance and control systems. Engineering simulation program

    NASA Technical Reports Server (NTRS)

    Gilbert, D. W.

    1973-01-01

    The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

  19. 76 FR 19829 - Clean Alternative Fuel Vehicle and Engine Conversions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ...EPA is streamlining the process by which manufacturers of clean alternative fuel conversion systems may demonstrate compliance with vehicle and engine emissions requirements. Specifically, EPA is revising the regulatory criteria for gaining an exemption from the Clean Air Act prohibition against tampering for the conversion of vehicles and engines to operate on a clean alternative fuel. This final rule creates additional compliance options beyond certification that protect manufacturers of clean alternative fuel conversion systems against a tampering violation, depending on the age of the vehicle or engine to be converted. The new options alleviate some economic and procedural impediments to clean alternative fuel conversions while maintaining environmental safeguards to ensure that acceptable emission levels from converted vehicles are sustained.

  20. 49 CFR 583.8 - Procedure for determining country of origin for engines and transmissions (for purposes of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) AUTOMOBILE PARTS CONTENT LABELING § 583.8 Procedure for determining country of origin for engines and... engines and transmissions (for purposes of determining the information specified by §§ 583.5(a)(4) and...) Each supplier of an engine or transmission shall determine the country of origin once a year for each...

  1. 49 CFR 583.8 - Procedure for determining country of origin for engines and transmissions (for purposes of...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) AUTOMOBILE PARTS CONTENT LABELING § 583.8 Procedure for determining country of origin for engines and... engines and transmissions (for purposes of determining the information specified by §§ 583.5(a)(4) and...) Each supplier of an engine or transmission shall determine the country of origin once a year for each...

  2. 49 CFR 583.8 - Procedure for determining country of origin for engines and transmissions (for purposes of...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) AUTOMOBILE PARTS CONTENT LABELING § 583.8 Procedure for determining country of origin for engines and... engines and transmissions (for purposes of determining the information specified by §§ 583.5(a)(4) and...) Each supplier of an engine or transmission shall determine the country of origin once a year for each...

  3. 49 CFR 583.8 - Procedure for determining country of origin for engines and transmissions (for purposes of...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) AUTOMOBILE PARTS CONTENT LABELING § 583.8 Procedure for determining country of origin for engines and... engines and transmissions (for purposes of determining the information specified by §§ 583.5(a)(4) and...) Each supplier of an engine or transmission shall determine the country of origin once a year for each...

  4. 14 CFR 29.903 - Engines.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

  5. 14 CFR 29.903 - Engines.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

  6. 14 CFR 29.903 - Engines.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

  7. 14 CFR 29.903 - Engines.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

  8. 14 CFR 29.903 - Engines.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

  9. 14 CFR 21.303 - Replacement and modification parts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... determination can be made. Statistical quality control procedures may be employed where it is shown that a... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and... the configuration of the part; and (ii) Information on dimensions, materials, and processes necessary...

  10. 77 FR 71208 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-29

    ... Government Entities) of the Internal Revenue Service to give advice on filing letter ruling, determination... be registered and the purchaser must give the seller a resale certificate. Affected Public: Private... collection. Title: Revenue Procedure 2011-4 (Letter Rulings), Revenue Procedure 2011-5 (Technical Advice...

  11. 14 CFR 21.275 - Experimental certificates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Experimental certificates. 21.275 Section... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Delegation Option Authorization Procedures § 21.275 Experimental certificates. (a) The manufacturer shall, before issuing an experimental certificate, obtain from the...

  12. 14 CFR 21.275 - Experimental certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Experimental certificates. 21.275 Section... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Delegation Option Authorization Procedures § 21.275 Experimental certificates. (a) The manufacturer shall, before issuing an experimental certificate, obtain from the...

  13. 33 CFR 338.2 - Activities involving the discharge of dredged or fill material into waters of the U.S.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... quality certifications and, if applicable, coastal zone consistency determinations. For activities which... and, if applicable, coastal zone consistency determinations should be provided using the procedures of...

  14. 33 CFR 338.2 - Activities involving the discharge of dredged or fill material into waters of the U.S.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... quality certifications and, if applicable, coastal zone consistency determinations. For activities which... and, if applicable, coastal zone consistency determinations should be provided using the procedures of...

  15. 78 FR 41283 - Airworthiness Directives; Dowty Propellers Propellers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-10

    ... service information at the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington... Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller Directorate, 12 New England... Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller Directorate, 12 New England...

  16. Simulation of atmospheric PAH emissions from diesel engines.

    PubMed

    Durán, A; de Lucas, A; Carmona, M; Ballesteros, R

    2001-08-01

    Simulation of atmospheric PAH emissions in a typical European passenger car diesel engine at steady conditions or under a certification cycle is made using in-house software. It is based on neural fitting of experimental data from eight different fuels tested under five operating steady conditions (reproducing modes of the European transient urban/extraurban certification cycle). The software allows the determination of PAH emissions as a function of the fuel composition parameters (aromatic content, cetane index, gross heat power, nitrogen and sulphur content) and operation conditions (torque and engine speed). The mathematical model reproduces experimental data with a maximum error of 20%. This tool is very useful, since changes in parameters can be made without experimental cost and the trend in modifications in PAH emissions is immediately obvious.

  17. Development of naval diesel engine duty cycles for air exhaust emission environmental impact analysis. Master's thesis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Markle, S.P.

    1994-05-01

    A strategy for testing naval diesel engines for exhaust emissions was developed. A survey of existing international and national standard diesel engine duty cycles was conducted. All were found to be inadequate for testing and certification of engine exhaust emissions from naval diesel powered ships. Naval ship data covering 11,500 hours of engine operation of four U.S. Navy LSD 41 Class amphibious ships was analyzed to develop a 27 point class operating profile. A procedure combining ship hull form characteristics, ship propulsion plant parameters, and ship operating profile was detailed to derive an 11-Mode duty cycle representative for testing LSDmore » 41 Class propulsion diesel engines. A similar procedure was followed for ship service diesel engines. Comparisons with industry accepted duty cycles were conducted using exhaust emission contour plots for the Colt-Pielstick PC-4B diesel engines. Results showed the 11-Mode LSD 41 Class Duty Cycle best predicted ship propulsion engine emissions compared to the 27 point operating profile propeller curve. The procedure was applied to T-AO 187 Class with similar results. The application of civilian industry standards to measure naval diesel ship propulsion engine exhaust emissions was found to be inadequate. Engine exhaust flow chemistry post turbocharger was investigated using the SANDIA Lab computer tool CHEMKIN. Results showed oxidation and reduction reactions within exhaust gases are quenched in the exhaust stack. Since the exhaust stream in the stack is unreactive, emission sampling may be performed where most convenient. A proposed emission measurement scheme for LSD 41 Class ships was presented.« less

  18. Preparing GMAT for Operational Maneuver Planning of the Advanced Composition Explorer (ACE)

    NASA Technical Reports Server (NTRS)

    Qureshi, Rizwan Hamid; Hughes, Steven P.

    2014-01-01

    The General Mission Analysis Tool (GMAT) is an open-source space mission design, analysis and trajectory optimization tool. GMAT is developed by a team of NASA, private industry, public and private contributors. GMAT is designed to model, optimize and estimate spacecraft trajectories in flight regimes ranging from low Earth orbit to lunar applications, interplanetary trajectories and other deep space missions. GMAT has also been flight qualified to support operational maneuver planning for the Advanced Composition Explorer (ACE) mission. ACE was launched in August, 1997 and is orbiting the Sun-Earth L1 libration point. The primary science objective of ACE is to study the composition of both the solar wind and the galactic cosmic rays. Operational orbit determination, maneuver operations and product generation for ACE are conducted by NASA Goddard Space Flight Center (GSFC) Flight Dynamics Facility (FDF). This paper discusses the entire engineering lifecycle and major operational certification milestones that GMAT successfully completed to obtain operational certification for the ACE mission. Operational certification milestones such as gathering of the requirements for ACE operational maneuver planning, gap analysis, test plans and procedures development, system design, pre-shadow operations, training to FDF ACE maneuver planners, shadow operations, Test Readiness Review (TRR) and finally Operational Readiness Review (ORR) are discussed. These efforts have demonstrated that GMAT is flight quality software ready to support ACE mission operations in the FDF.

  19. 77 FR 39623 - Airworthiness Standards: Aircraft Engines; Technical Amendment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-05

    ...] Airworthiness Standards: Aircraft Engines; Technical Amendment AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; technical amendment. SUMMARY: This amendment clarifies aircraft engine... from applicants requesting FAA engine type certifications and aftermarket certifications, such as...

  20. 40 CFR 86.1332-90 - Engine mapping procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... § 86.1332-90 Engine mapping procedures. (a) Mount test engine on the engine dynamometer. (b) Determine... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Engine mapping procedures. 86.1332-90... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission...

  1. 40 CFR 86.1332-90 - Engine mapping procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... § 86.1332-90 Engine mapping procedures. (a) Mount test engine on the engine dynamometer. (b) Determine... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Engine mapping procedures. 86.1332-90... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission...

  2. 40 CFR 86.1332-90 - Engine mapping procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... § 86.1332-90 Engine mapping procedures. (a) Mount test engine on the engine dynamometer. (b) Determine... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Engine mapping procedures. 86.1332-90... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission...

  3. The effects of aircraft certification rules on general aviation accidents

    NASA Astrophysics Data System (ADS)

    Anderson, Carolina Lenz

    The purpose of this study was to analyze the frequency of general aviation airplane accidents and accident rates on the basis of aircraft certification to determine whether or not differences in aircraft certification rules had an influence on accidents. In addition, the narrative cause descriptions contained within the accident reports were analyzed to determine whether there were differences in the qualitative data for the different certification categories. The certification categories examined were: Federal Aviation Regulations Part 23, Civil Air Regulations 3, Light Sport Aircraft, and Experimental-Amateur Built. The accident causes examined were those classified as: Loss of Control, Controlled Flight into Terrain, Engine Failure, and Structural Failure. Airworthiness certification categories represent a wide diversity of government oversight. Part 23 rules have evolved from the initial set of simpler design standards and have progressed into a comprehensive and strict set of rules to address the safety issues of the more complex airplanes within the category. Experimental-Amateur Built airplanes have the least amount of government oversight and are the fastest growing segment. The Light Sport Aircraft category is a more recent certification category that utilizes consensus standards in the approval process. Civil Air Regulations 3 airplanes were designed and manufactured under simpler rules but modifying these airplanes has become lengthy and expensive. The study was conducted using a mixed methods methodology which involves both quantitative and qualitative elements. A Chi-Square test was used for a quantitative analysis of the accident frequency among aircraft certification categories. Accident rate analysis of the accidents among aircraft certification categories involved an ANCOVA test. The qualitative component involved the use of text mining techniques for the analysis of the narrative cause descriptions contained within the accident reports. The Chi-Square test indicated that there was no significant difference in the number of accidents among the different certification categories when either Controlled Flight into Terrain or Structural Failure was listed as cause. However, there was a significant difference in the frequency of accidents with regard to Loss of Control and Engine Failure accidents. The results of the ANCOVA test indicated that there was no significant difference in the accident rate with regard to Loss of Control, Controlled Flight into Terrain, or Structural Failure accidents. There was, however, a significant difference in Engine Failure accidents between Experimental-Amateur Built and the other categories.The text mining analysis of the narrative causes of Loss of Control accidents indicated that only the Civil Air Regulations 3 category airplanes had clusters of words associated with visual flight into instrument meteorological conditions. Civil Air Regulations 3 airplanes were designed and manufactured prior to the 1960s and in most cases have not been retrofitted to take advantage of newer technologies that could help prevent Loss of Control accidents. The study indicated that General Aviation aircraft certification rules do not have a statistically significant effect on aircraft accidents except for Loss of Control and Engine Failure. According to the literature, government oversight could have become an obstacle in the implementation of safety enhancing equipment that could reduce Loss of Control accidents. Oversight should focus on ensuring that Experimental-Amateur Built aircraft owners perform a functional test that could prevent some of the Engine Failure accidents.

  4. 76 FR 64003 - Airworthiness Directives; WYTWORNIA SPRZETU KOMUNIKACYJNEGO (WSK) “PZL-RZESZOW”-SPOLKA AKCYJNA...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... CONTACT: James Lawrence, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller..., Manager, Engine and Propeller Directorate, Aircraft Certification Service. [FR Doc. 2011-26274 Filed 10-14... Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; correction...

  5. Community Needs Assessment for an Electronics and Computer Engineering Technology Program at Maui, Molokai, and Lanai.

    ERIC Educational Resources Information Center

    Pezzoli, Jean A.

    In June 1992, Maui Community College (MCC), in Hawaii, conducted a survey of the communities of Maui, Molokai, Lanai, and Hana to determine perceived needs for an associate degree and certificate program in electronics and computer engineering. Questionnaires were mailed to 500 firms utilizing electronic or computer services, seeking information…

  6. Study of Noise-Certification Standards for Aircraft Engines. Volume 2. Procedures for Measuring Far Field Sound Pressure Levels around an Outdoor Jet-Engine Test Stand.

    DTIC Science & Technology

    1983-06-01

    60 References ........................................................... 79 AccesSqlon For NTIS rFA&I r"!’ TAU U: .,P Dist r A. -. S iv...separate exhaust nozzles for discharge of fan and turbine exhaust flows (e.g., JT15D, TFE731 , ALF-502, CF34, JT3D, CFM56, RB.211, CF6, JT9D, and PW2037...minimum radial distance from the effective source of sound at 40 Hz should then be approxi- mately 69 m. At 60 Hz, the minimum radial distance should be

  7. 77 FR 71691 - Type Certification Procedures for Changed Products

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-04

    ...-8994; Amdt. No. 21-96] RIN 2120-AK19 Type Certification Procedures for Changed Products AGENCY: Federal... regulations for the certification of changes to type-certificated products. That amendment was to enhance... (certification) of the entire changed product. Therefore, Sec. 21.101 is amended to replace ``changed product...

  8. 10 CFR Appendix D to Subpart T of... - Enforcement for Performance Standards; Compliance Determination Procedure for Certain Commercial...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Determination Procedure for Certain Commercial Equipment D Appendix D to Subpart T of Part 431 Energy DEPARTMENT... EQUIPMENT Certification and Enforcement Pt. 431, Subpt. T, App. D Appendix D to Subpart T of Part 431... where EPS is the energy performance standard and t is a statistic based on a 97.5 percent, one-sided...

  9. 40 CFR 1042.655 - Special certification provisions for-Category 3 engines with aftertreatment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... demonstrating for certification that catalyst-equipped engines (or engines equipped with other aftertreatment... engine-out emissions comply with the Tier 2 standards. The catalyst material or other aftertreatment... points. This catalyst or aftertreatment testing may be performed on a benchscale. (c) Engineering...

  10. (Low-level radioactive waste management techniques)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Van Hoesen, S.D.; Kennerly, J.M.; Williams, L.C.

    1988-08-08

    The US team consisting of representatives of Oak Ridge National Laboratory (ORNL), Savannah River plant (SRP), Idaho National Engineering Laboratory (INEL), and the Department of Energy, Oak Ridge Operations participated in a training program on French low-level radioactive waste (LLW) management techniques. Training in the rigorous waste characterization, acceptance and certification procedures required in France was provided at Agence Nationale pour les Gestion des Dechets Radioactif (ANDRA) offices in Paris.

  11. 40 CFR 86.1422 - Analyzer calibration.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Trucks; Certification Short Test Procedures § 86.1422 Analyzer calibration. (a) Determine that the... check. Prior to its introduction into service and at specified periods thereafter, the analyzer must...

  12. 76 FR 72087 - Special Conditions: Diamond Aircraft Industries, Model DA-40NG; Electronic Engine Control (EEC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-22

    ... engine design certification, and the certification requirements for engine control systems are driven by... following novel or unusual design features: Electronic engine control system. Discussion As discussed above...; Electronic Engine Control (EEC) System AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final...

  13. 14 CFR 25.903 - Engines.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Engines. 25.903 Section 25.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.903 Engines. (a) Engine type certificate. (1) Each engine must have a type certificate and must meet the applicable requirements of part 34 of this...

  14. 14 CFR 25.903 - Engines.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Engines. 25.903 Section 25.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.903 Engines. (a) Engine type certificate. (1) Each engine must have a type certificate and must meet the applicable requirements of part 34 of this...

  15. 14 CFR 25.903 - Engines.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Engines. 25.903 Section 25.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.903 Engines. (a) Engine type certificate. (1) Each engine must have a type certificate and must meet the applicable requirements of part 34 of this...

  16. 14 CFR 25.903 - Engines.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Engines. 25.903 Section 25.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.903 Engines. (a) Engine type certificate. (1) Each engine must have a type certificate and must meet the applicable requirements of part 34 of this...

  17. 7 CFR 1730.26 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

  18. 7 CFR 1730.26 - Certification.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

  19. 7 CFR 1730.26 - Certification.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

  20. 7 CFR 1730.26 - Certification.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

  1. 7 CFR 1730.26 - Certification.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

  2. 40 CFR 92.214 - Production locomotives and engines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Production locomotives and engines. 92... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Certification Provisions § 92.214 Production locomotives and engines. Any manufacturer or remanufacturer obtaining certification...

  3. 49 CFR 240.203 - Determinations required as a prerequisite to certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... standards of § 240.121; (3) The individual has the necessary knowledge, as demonstrated by successfully... knowledge and operating performance skills, as demonstrated by successfully completing an operational... railroad may certify a person as a student engineer after determining that the person meets the vision and...

  4. 40 CFR 86.080-12 - Alternative certification procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Liquefied Petroleum Gas-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.080-12 Alternative certification... are obtained under the abbreviated certification review procedure. (vii) Upon completing all... for certification, test reports and data submitted by the manufacturer, data obtained during an...

  5. 40 CFR 86.080-12 - Alternative certification procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., Liquefied Petroleum Gas-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.080-12 Alternative certification... are obtained under the abbreviated certification review procedure. (vii) Upon completing all... for certification, test reports and data submitted by the manufacturer, data obtained during an...

  6. 40 CFR 94.214 - Production engines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Production engines. 94.214 Section 94...) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.214 Production engines. Any manufacturer obtaining certification under this part shall supply to the Administrator, upon...

  7. 14 CFR 91.529 - Flight engineer requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Flight engineer requirements. 91.529...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer... flight engineer certificate: (1) An airplane for which a type certificate was issued before January 2...

  8. 14 CFR 91.529 - Flight engineer requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Flight engineer requirements. 91.529...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer... flight engineer certificate: (1) An airplane for which a type certificate was issued before January 2...

  9. 14 CFR 91.529 - Flight engineer requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Flight engineer requirements. 91.529...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer... flight engineer certificate: (1) An airplane for which a type certificate was issued before January 2...

  10. 40 CFR 94.214 - Production engines.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Production engines. 94.214 Section 94...) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.214 Production engines. Any manufacturer obtaining certification under this part shall supply to the Administrator, upon...

  11. 40 CFR 94.214 - Production engines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Production engines. 94.214 Section 94...) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.214 Production engines. Any manufacturer obtaining certification under this part shall supply to the Administrator, upon...

  12. 40 CFR 94.214 - Production engines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Production engines. 94.214 Section 94...) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.214 Production engines. Any manufacturer obtaining certification under this part shall supply to the Administrator, upon...

  13. 40 CFR 94.214 - Production engines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Production engines. 94.214 Section 94...) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.214 Production engines. Any manufacturer obtaining certification under this part shall supply to the Administrator, upon...

  14. Detailed Post-Soft Impact Progressive Damage Assessment for Hybrid Structure Jet Engines

    NASA Technical Reports Server (NTRS)

    Siddens, Aaron; Bayandor, Javid; Celestina, Mark L.

    2014-01-01

    Currently, certification of engine designs for resistance to bird strike is reliant on physical tests. Predictive modeling of engine structural damage has mostly been limited to evaluation of individual forward section components, such as fan blades within a fixed frame of reference, to direct impact with a bird. Such models must be extended to include interactions among engine components under operating conditions to evaluate the full extent of engine damage. This paper presents the results of a study aim to develop a methodology for evaluating bird strike damage in advanced propulsion systems incorporating hybrid composite/metal structures. The initial degradation and failure of individual fan blades struck by a bird were investigated. Subsequent damage to other fan blades and engine components due to resultant violent fan assembly vibrations and fragmentation was further evaluated. Various modeling parameters for the bird and engine components were investigated to determine guidelines for accurately capturing initial damage and progressive failure of engine components. Then, a novel hybrid structure modeling approach was investigated and incorporated into the crashworthiness methodology. Such a tool is invaluable to the process of design, development, and certification of future advanced propulsion systems.

  15. Idaho National Engineering Laboratory code assessment of the Rocky Flats transuranic waste

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-07-01

    This report is an assessment of the content codes associated with transuranic waste shipped from the Rocky Flats Plant in Golden, Colorado, to INEL. The primary objective of this document is to characterize and describe the transuranic wastes shipped to INEL from Rocky Flats by item description code (IDC). This information will aid INEL in determining if the waste meets the waste acceptance criteria (WAC) of the Waste Isolation Pilot Plant (WIPP). The waste covered by this content code assessment was shipped from Rocky Flats between 1985 and 1989. These years coincide with the dates for information available in themore » Rocky Flats Solid Waste Information Management System (SWIMS). The majority of waste shipped during this time was certified to the existing WIPP WAC. This waste is referred to as precertified waste. Reassessment of these precertified waste containers is necessary because of changes in the WIPP WAC. To accomplish this assessment, the analytical and process knowledge available on the various IDCs used at Rocky Flats were evaluated. Rocky Flats sources for this information include employee interviews, SWIMS, Transuranic Waste Certification Program, Transuranic Waste Inspection Procedure, Backlog Waste Baseline Books, WIPP Experimental Waste Characterization Program (headspace analysis), and other related documents, procedures, and programs. Summaries are provided of: (a) certification information, (b) waste description, (c) generation source, (d) recovery method, (e) waste packaging and handling information, (f) container preparation information, (g) assay information, (h) inspection information, (i) analytical data, and (j) RCRA characterization.« less

  16. 49 CFR 240.105 - Criteria for selection of designated supervisors of locomotive engineers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of locomotive engineers. 240.105 Section 240.105 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Component Elements of the Certification Process § 240.105 Criteria for selection of designated supervisors of locomotive engineers. (a) Each railroad's program shall include...

  17. 49 CFR 240.105 - Criteria for selection of designated supervisors of locomotive engineers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... of locomotive engineers. 240.105 Section 240.105 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Component Elements of the Certification Process § 240.105 Criteria for selection of designated supervisors of locomotive engineers. (a) Each railroad's program shall include...

  18. 49 CFR 240.105 - Criteria for selection of designated supervisors of locomotive engineers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of locomotive engineers. 240.105 Section 240.105 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Component Elements of the Certification Process § 240.105 Criteria for selection of designated supervisors of locomotive engineers. (a) Each railroad's program shall include...

  19. 49 CFR 240.105 - Criteria for selection of designated supervisors of locomotive engineers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... of locomotive engineers. 240.105 Section 240.105 Transportation Other Regulations Relating to... CERTIFICATION OF LOCOMOTIVE ENGINEERS Component Elements of the Certification Process § 240.105 Criteria for selection of designated supervisors of locomotive engineers. (a) Each railroad's program shall include...

  20. 13 CFR 121.411 - What are the size procedures for SBA's Section 8(d) Subcontracting Program?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... or sanctioned by SBA) as an accurate representation of a concern's size and ownership characteristics... submission of the offer that the size or socioeconomic representations and certifications made in SAM (or any... determination may include the firm's internal management procedures governing size representation or...

  1. 23 CFR 1270.8 - Procedures affecting States in noncompliance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Procedures affecting States in noncompliance. 1270.8... States in noncompliance. (a) Each fiscal year, each State determined to be in noncompliance with 23 U.S.C. 154 and this part, based on NHTSA's and FHWA's preliminary review of its certification, will be...

  2. 10 CFR 712.18 - Transferring HRP certification.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Transferring HRP certification. 712.18 Section 712.18 Energy DEPARTMENT OF ENERGY HUMAN RELIABILITY PROGRAM Establishment of and Procedures for the Human Reliability Program Procedures § 712.18 Transferring HRP certification. (a) For HRP certification to be...

  3. 22 CFR 61.4 - Certification procedures-Exports.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Certification procedures-Exports. 61.4 Section 61.4 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES WORLD-WIDE FREE FLOW OF AUDIO-VISUAL MATERIALS § 61.4 Certification procedures—Exports. (a) Applicants seeking certification of...

  4. 22 CFR 61.4 - Certification procedures-Exports.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certification procedures-Exports. 61.4 Section 61.4 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES WORLD-WIDE FREE FLOW OF AUDIO-VISUAL MATERIALS § 61.4 Certification procedures—Exports. (a) Applicants seeking certification of...

  5. Kentucky Teacher Preparation and Certification Handbook. 1981 Edition.

    ERIC Educational Resources Information Center

    Kentucky State Dept. of Education, Frankfort.

    This handbook sets forth the regulations of the Kentucky State Board of Education that relate to teacher education and certification. The following topics are covered: (1) selected statutory provisions relating to teacher education and certification; (2) teacher certification procedures; (3) ranking of teacher qualifications; (4) procedures for…

  6. Clean-burning diesel engines. Interim report, June-December 1985 on Phase 3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dietzmann, H.E.; Smith, L.R.

    Gaseous and particulate emissions were measured from diesel forklift engines under a variety of steady-state conditions. An EPA certification fuel was used to determine CO, CO/sub 2/, NOx, HC, particulate, aldehydes, smoke and SO/sub 2/ emission rates from Isuzu C-240, Peugeot XD3P, and Teledyne TMD-20 diesel engines. Emission rates were reported in b/hp-hr, g/hr, and observed concentration, i.e., ppm, percent, or mg/cu. m.

  7. 33 CFR 276.6 - General policy.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... specifications for the work they propose to undertake. However, those non-Federal engineering costs and overhead... commenced after certification shall be eligible for certification except for local engineering work noted...; certification of the proposal will be in the general public interest. (d) Costs assigned to that part of the...

  8. 40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification... of your intent to use your remanufacturing system for marine engines. Include a list of marine engine models for which your system may be used. (2) If there are significant differences in how your...

  9. 40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification... of your intent to use your remanufacturing system for marine engines. Include a list of marine engine models for which your system may be used. (2) If there are significant differences in how your...

  10. 40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification... of your intent to use your remanufacturing system for marine engines. Include a list of marine engine models for which your system may be used. (2) If there are significant differences in how your...

  11. 40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification... of your intent to use your remanufacturing system for marine engines. Include a list of marine engine models for which your system may be used. (2) If there are significant differences in how your...

  12. 40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification... of your intent to use your remanufacturing system for marine engines. Include a list of marine engine models for which your system may be used. (2) If there are significant differences in how your...

  13. 40 CFR 91.208 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Averaging, Banking, and Trading Provisions § 91.208... engines for which certification is requested will not, to the best of the manufacturer's belief, cause the...'s engine families. (2) Declare an FEL for each engine family for HC plus NOX. The FEL must have the...

  14. 75 FR 9515 - Airworthiness Directives; Dowty Propellers Models R354/4-123-F/13, R354/4-123-F/20, R375/4-123-F...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-03

    ...: Terry Fahr, Aerospace Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller... Office, FAA, Engine and Propeller Directorate, has the authority to approve AMOCs for this AD, if..., Aerospace Engineer, Boston Aircraft Certification Office, FAA, Engine and Propeller Directorate, 12 New...

  15. 78 FR 26103 - Proposed Standard Operating Procedure (SOP) of the Aircraft Certification Service (AIR) Project...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-03

    ... (SOP) of the Aircraft Certification Service (AIR) Project Prioritization and Resource Management ACTION... procedure (SOP) describing the process used to prioritize certification projects and manage certification project resources when local resources are not available. DATES: Comments must be received on or before...

  16. 40 CFR 86.884-5 - Test procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-5 Test procedures. The procedures..., or eliminating smoke emissions and to uncontrolled engines. (b) The test is designed to determine the opacity of smoke in exhaust emissions during those engine operating conditions which tend to promote smoke...

  17. 40 CFR 86.884-5 - Test procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-5 Test procedures. The procedures..., or eliminating smoke emissions and to uncontrolled engines. (b) The test is designed to determine the opacity of smoke in exhaust emissions during those engine operating conditions which tend to promote smoke...

  18. 40 CFR 86.884-5 - Test procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-5 Test procedures. The procedures..., or eliminating smoke emissions and to uncontrolled engines. (b) The test is designed to determine the opacity of smoke in exhaust emissions during those engine operating conditions which tend to promote smoke...

  19. Validation of an Integrated Airframe and Turbofan Engine Simulation for Evaluation of Propulsion Control Modes

    NASA Technical Reports Server (NTRS)

    Litt, Jonathan S.; Sowers, T Shane; Liu, Yuan; Owen, A. Karl; Guo, Ten-Huei

    2015-01-01

    The National Aeronautics and Space Administration (NASA) has developed independent airframe and engine models that have been integrated into a single real-time aircraft simulation for piloted evaluation of propulsion control algorithms. In order to have confidence in the results of these evaluations, the integrated simulation must be validated to demonstrate that its behavior is realistic and that it meets the appropriate Federal Aviation Administration (FAA) certification requirements for aircraft. The paper describes the test procedures and results, demonstrating that the integrated simulation generally meets the FAA requirements and is thus a valid testbed for evaluation of propulsion control modes.

  20. Sample Return Primer and Handbook

    NASA Technical Reports Server (NTRS)

    Barrow, Kirk; Cheuvront, Allan; Faris, Grant; Hirst, Edward; Mainland, Nora; McGee, Michael; Szalai, Christine; Vellinga, Joseph; Wahl, Thomas; Williams, Kenneth; hide

    2007-01-01

    This three-part Sample Return Primer and Handbook provides a road map for conducting the terminal phase of a sample return mission. The main chapters describe element-by-element analyses and trade studies, as well as required operations plans, procedures, contingencies, interfaces, and corresponding documentation. Based on the experiences of the lead Stardust engineers, the topics include systems engineering (in particular range safety compliance), mission design and navigation, spacecraft hardware and entry, descent, and landing certification, flight and recovery operations, mission assurance and system safety, test and training, and the very important interactions with external support organizations (non-NASA tracking assets, landing site support, and science curation).

  1. Design of lightning protection for a full-authority digital engine control

    NASA Technical Reports Server (NTRS)

    Dargi, M.; Rupke, E.; Wiles, K.

    1991-01-01

    The steps and procedures are described which are necessary to achieve a successful lightning-protection design for a state-of-the-art Full-Authority Digital Engine Control (FADEC) system. The engine and control systems used as examples are fictional, but the design and verification methods are real. Topics discussed include: applicable airworthiness regulation, selection of equipment transient design and control levels for the engine/airframe and intra-engine segments of the system, the use of cable shields, terminal-protection devices and filter circuits in hardware protection design, and software approaches to minimize upset potential. Shield terminations, grounding, and bonding are also discussed, as are the important elements of certification and test plans, and the role of tests and analyses. Also included are examples of multiple-stroke and multiple-burst testing. A review of design pitfalls and challenges, and status of applicable test standards such as RTCA DO-160, Section 22, are presented.

  2. 8 CFR 271.1 - Procedures for inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... REASONABLE EFFORTS TO PREVENT THE UNAUTHORIZED ENTRY OF ALIENS BY THE OWNERS OF RAILROAD LINES, INTERNATIONAL... director determines that preventive measures are inadequate, he or she shall advise the owners or operators... results of his or her review. (c) Preventive measures and certification. Upon a determination by the...

  3. 76 FR 8321 - Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-14

    ... contact Marc Bouthillier, ANE-111, Engine and Propeller Directorate, Aircraft Certification Service, 12... contact Vincent Bennett, ANE-7 Engine and Propeller Directorate, Aircraft Certification Service, 12 New... helicopter will incorporate a main rotor brake what will allow the engine main output shaft and power turbine...

  4. Certify for success: A methodology for human-centered certification of advanced aviation systems

    NASA Technical Reports Server (NTRS)

    Small, Ronald L.; Rouse, William B.

    1994-01-01

    This position paper uses the methodology in Design for Success as a basis for a human factors certification program. The Design for Success (DFS) methodology espouses a multi-step process to designing and developing systems in a human-centered fashion. These steps are as follows: (1) naturalizing - understand stakeholders and their concerns; (2) marketing - understand market-oriented alternatives to meeting stakeholder concerns; (3) engineering - detailed design and development of the system considering tradeoffs between technology, cost, schedule, certification requirements, etc.; (4) system evaluation - determining if the system meets its goal(s); and (5) sales and service - delivering and maintaining the system. Because the main topic of this paper is certification, we will focus our attention on step 4, System Evaluation, since it is the natural precursor to certification. Evaluation involves testing the system and its parts for their correct behaviors. Certification focuses not only on ensuring that the system exhibits the correct behaviors, but ONLY the correct behaviors.

  5. 14 CFR 21.53 - Statement of conformity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... each aircraft engine and propeller presented to the Administrator for type certification. This statement of conformity must include a statement that the aircraft engine or propeller conforms to the type... aircraft engine or propeller presented for type certification conforms to its type design. ...

  6. 40 CFR 1042.235 - Emission testing related to certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... The engine you provide must include appropriate manifolds, aftertreatment devices, electronic control...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine Families § 1042.235 Emission testing related to certification. This...

  7. 40 CFR 1042.235 - Emission testing related to certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... The engine you provide must include appropriate manifolds, aftertreatment devices, electronic control...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine Families § 1042.235 Emission testing related to certification. This...

  8. 40 CFR 1042.235 - Emission testing related to certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... The engine you provide must include appropriate manifolds, aftertreatment devices, electronic control...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine Families § 1042.235 Emission testing related to certification. This...

  9. 40 CFR 1042.235 - Emission testing related to certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... The engine you provide must include appropriate manifolds, aftertreatment devices, electronic control...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine Families § 1042.235 Emission testing related to certification. This...

  10. 40 CFR 1042.235 - Emission testing related to certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... The engine you provide must include appropriate manifolds, aftertreatment devices, electronic control...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine Families § 1042.235 Emission testing related to certification. This...

  11. CAT--the new committee for advanced therapies at the European Medicines Agency.

    PubMed

    Celis, P

    2010-01-01

    The Regulation on Advanced Therapies (Regulation (EC) 1394/2007) establishes a new scientific committee, the Committee for Advanced Therapies (CAT), at the European Medicines Agency. The CAT is composed of experts in the field of Advanced Therapy Medicinal Products (ATMPs)--gene and cell therapy and tissue engineered products--and is responsible for the evaluation of the marketing authorisation applications for this novel class of products. The CAT is also involved in all scientific advice on ATMPs and in two new regulatory procedures for ATMPs, the classification and the certification procedures. The CAT will also play a key role in early contacts with developers of ATMPs.

  12. 14 CFR 33.1 - Applicability.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS: AIRCRAFT ENGINES General § 33.1 Applicability. (a) This part prescribes airworthiness standards for the issue of type certificates and changes to those certificates, for aircraft engines. (b) Each...

  13. 14 CFR 33.1 - Applicability.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS: AIRCRAFT ENGINES General § 33.1 Applicability. (a) This part prescribes airworthiness standards for the issue of type certificates and changes to those certificates, for aircraft engines. (b) Each...

  14. 50 CFR 300.207 - Alternative procedures for bycatch of PLMRs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Secretary cannot reach a certification determination for that nation by the time of the next biennial report..., in the case of pelagic longline fisheries, the regulatory program of an identified nation includes...

  15. 40 CFR 92.304 - Compliance requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emission credits to offset the difference between the emission standard and the FEL for such engine family...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Certification Averaging, Banking, and... participate in certification averaging, banking and trading programs shall select a FEL for each engine family...

  16. 40 CFR 94.212 - Labeling.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... auxiliary, variable-speed propulsion engines used with fixed-pitch propellers, recreational, etc.) (c) The... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.212 Labeling. (a) General requirements. (1) Each new engine covered by a certificate of conformity under § 94.208 shall be labeled by the...

  17. 40 CFR 94.212 - Labeling.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... auxiliary, variable-speed propulsion engines used with fixed-pitch propellers, recreational, etc.) (c) The... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.212 Labeling. (a) General requirements. (1) Each new engine covered by a certificate of conformity under § 94.208 shall be labeled by the...

  18. 40 CFR 94.212 - Labeling.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... auxiliary, variable-speed propulsion engines used with fixed-pitch propellers, recreational, etc.) (c) The... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.212 Labeling. (a) General requirements. (1) Each new engine covered by a certificate of conformity under § 94.208 shall be labeled by the...

  19. 40 CFR 94.212 - Labeling.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... auxiliary, variable-speed propulsion engines used with fixed-pitch propellers, recreational, etc.) (c) The... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.212 Labeling. (a) General requirements. (1) Each new engine covered by a certificate of conformity under § 94.208 shall be labeled by the...

  20. 40 CFR 94.212 - Labeling.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... auxiliary, variable-speed propulsion engines used with fixed-pitch propellers, recreational, etc.) (c) The... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Certification Provisions § 94.212 Labeling. (a) General requirements. (1) Each new engine covered by a certificate of conformity under § 94.208 shall be labeled by the...

  1. 30 CFR 36.21 - Engine for equipment considered for certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... considered for certification. Only equipment powered by a compression-ignition (diesel) engine and burning... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Engine for equipment considered for... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL...

  2. 30 CFR 36.21 - Engine for equipment considered for certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... considered for certification. Only equipment powered by a compression-ignition (diesel) engine and burning... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Engine for equipment considered for... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL...

  3. 30 CFR 36.21 - Engine for equipment considered for certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... considered for certification. Only equipment powered by a compression-ignition (diesel) engine and burning... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Engine for equipment considered for... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL...

  4. 30 CFR 36.21 - Engine for equipment considered for certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... considered for certification. Only equipment powered by a compression-ignition (diesel) engine and burning... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Engine for equipment considered for... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL...

  5. 30 CFR 36.21 - Engine for equipment considered for certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... considered for certification. Only equipment powered by a compression-ignition (diesel) engine and burning... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Engine for equipment considered for... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL...

  6. 40 CFR 89.209 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Averaging, Banking, and Trading... its intent to include specific engine families in the averaging, banking, and trading programs. (2) Submit a statement that the engines for which certification is requested will not, to the best of the...

  7. 42 CFR 498.56 - Hearing on new issues.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) STANDARDS AND CERTIFICATION APPEALS PROCEDURES FOR DETERMINATIONS THAT AFFECT PARTICIPATION IN THE MEDICARE PROGRAM AND FOR DETERMINATIONS THAT AFFECT THE PARTICIPATION OF ICFs/MR AND CERTAIN NFs IN THE MEDICAID..., provide a hearing on new issues that impinge on the rights of the affected party. (2) Except for provider...

  8. Overview of the DAEDALOS project

    NASA Astrophysics Data System (ADS)

    Bisagni, Chiara

    2015-10-01

    The "Dynamics in Aircraft Engineering Design and Analysis for Light Optimized Structures" (DAEDALOS) project aimed to develop methods and procedures to determine dynamic loads by considering the effects of dynamic buckling, material damping and mechanical hysteresis during aircraft service. Advanced analysis and design principles were assessed with the scope of partly removing the uncertainty and the conservatism of today's design and certification procedures. To reach these objectives a DAEDALOS aircraft model representing a mid-size business jet was developed. Analysis and in-depth investigation of the dynamic response were carried out on full finite element models and on hybrid models. Material damping was experimentally evaluated, and different methods for damping evaluation were developed, implemented in finite element codes and experimentally validated. They include a strain energy method, a quasi-linear viscoelastic material model, and a generalized Maxwell viscous material damping. Panels and shells representative of typical components of the DAEDALOS aircraft model were experimentally tested subjected to static as well as dynamic loads. Composite and metallic components of the aircraft model were investigated to evaluate the benefit in terms of weight saving.

  9. Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

    NASA Technical Reports Server (NTRS)

    Diorio, Kimberly A.

    2002-01-01

    A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

  10. 40 CFR 92.306 - Certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... certificate of conformity for such engine families. The certificate of conformity may be voided ab initio for..., and the certificate may be deemed void ab initio. (3) The manufacturer or remanufacturer (as...

  11. 40 CFR 92.306 - Certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... certificate of conformity for such engine families. The certificate of conformity may be voided ab initio for..., and the certificate may be deemed void ab initio. (3) The manufacturer or remanufacturer (as...

  12. 40 CFR 92.306 - Certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... certificate of conformity for such engine families. The certificate of conformity may be voided ab initio for..., and the certificate may be deemed void ab initio. (3) The manufacturer or remanufacturer (as...

  13. 40 CFR 92.306 - Certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... certificate of conformity for such engine families. The certificate of conformity may be voided ab initio for..., and the certificate may be deemed void ab initio. (3) The manufacturer or remanufacturer (as...

  14. 40 CFR 92.306 - Certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... certificate of conformity for such engine families. The certificate of conformity may be voided ab initio for..., and the certificate may be deemed void ab initio. (3) The manufacturer or remanufacturer (as...

  15. 14 CFR 63.39 - Skill requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... simulator, or in an approved flight engineer training device, show that he can satisfactorily perform... CERTIFICATION: FLIGHT CREWMEMBERS OTHER THAN PILOTS Flight Engineers § 63.39 Skill requirements. (a) An applicant for a flight engineer certificate with a class rating must pass a practical test on the duties of...

  16. 14 CFR 63.39 - Skill requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... simulator, or in an approved flight engineer training device, show that he can satisfactorily perform... CERTIFICATION: FLIGHT CREWMEMBERS OTHER THAN PILOTS Flight Engineers § 63.39 Skill requirements. (a) An applicant for a flight engineer certificate with a class rating must pass a practical test on the duties of...

  17. 40 CFR 90.107 - Application for certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., manufacturers of two-stroke lawnmower engines must submit with their application for a certificate of conformity: (i) For model year 1997, information establishing the highest number of two-stroke lawnmower engines... production and projected production for the current year. (2) In model year 1997, two-stroke lawnmower engine...

  18. 40 CFR 90.107 - Application for certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., manufacturers of two-stroke lawnmower engines must submit with their application for a certificate of conformity: (i) For model year 1997, information establishing the highest number of two-stroke lawnmower engines... production and projected production for the current year. (2) In model year 1997, two-stroke lawnmower engine...

  19. 40 CFR 90.107 - Application for certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., manufacturers of two-stroke lawnmower engines must submit with their application for a certificate of conformity: (i) For model year 1997, information establishing the highest number of two-stroke lawnmower engines... production and projected production for the current year. (2) In model year 1997, two-stroke lawnmower engine...

  20. 40 CFR 90.107 - Application for certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., manufacturers of two-stroke lawnmower engines must submit with their application for a certificate of conformity: (i) For model year 1997, information establishing the highest number of two-stroke lawnmower engines... production and projected production for the current year. (2) In model year 1997, two-stroke lawnmower engine...

  1. 14 CFR 34.48 - Derivative engines for emissions certification purposes.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Derivative engines for emissions certification purposes. 34.48 Section 34.48 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES...

  2. 14 CFR 34.48 - Derivative engines for emissions certification purposes.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Derivative engines for emissions certification purposes. 34.48 Section 34.48 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES...

  3. 77 FR 42677 - Special Conditions: General Electric CT7-2E1 Turboshaft Engine

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-20

    ... Mihail, ANE-111, Engine and Propeller Directorate, Aircraft Certification Service, 12 New England..., ANE-7 Engine and Propeller Directorate, Aircraft Certification Service, 12 New England Executive Park... additional requirements for the rating's definition, overspeed, controls system, and endurance test because...

  4. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC certification...

  5. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC certification...

  6. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC certification...

  7. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC certification...

  8. 15 CFR 768.6 - Criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... DETERMINATION PROCEDURES AND CRITERIA § 768.6 Criteria. BIS will evaluate the evidence contained in a FAS or TAC... defined in § 768.1(d) of this part. In order to initiate an assessment, each FAS and TAC certification...

  9. 75 FR 47197 - Airworthiness Directives; Schweizer Aircraft Corporation (Schweizer) Model 269D Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ..., Aviation Safety Engineer, FAA, New York Aircraft Certification Office, Airframe and Propulsion Branch, 1600..., Aerospace Engineer, Aviation Safety Engineer, FAA, New York Aircraft Certification Office, Airframe and Propulsion Branch, 1600 Stewart Ave., suite 410, Westbury, New York 11590, telephone (516) 228-7304, fax (516...

  10. 40 CFR 1042.340 - When may EPA revoke my certificate under this subpart and how may I sell these engines again?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... your proposed remedy to address a suspended certificate under § 1042.325 is inadequate to solve the problem or requires you to change the engine's design or emission control system. (b) To sell engines from...

  11. Wisconsin Fire Service Certification Program Procedures.

    ERIC Educational Resources Information Center

    Pribyl, Paul F.

    These procedures for the Wisconsin Fire Service Certification Program provide professional qualification standards for three levels of fire fighter and four levels of fire service instructor. A section on program authority/operations covers program development, the credential review system, and revocation of certification. Requirements for…

  12. 40 CFR 1054.645 - What special provisions apply for converting an engine to use an alternate fuel?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... converting an engine to use an alternate fuel? 1054.645 Section 1054.645 Protection of Environment... apply for converting an engine to use an alternate fuel? A certificate of conformity is no longer valid... fuel type. Such engines may need to be recertified as specified in this section if the certificate is...

  13. 40 CFR 86.079-31 - Separate certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Duty Engines, and for 1985 and Later Model Year New Gasoline Fueled, Natural Gas-Fueled, Liquefied... certification of part of his product line. The selection of test vehicles (or test engines) and the computation...

  14. 40 CFR 86.079-31 - Separate certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Duty Engines, and for 1985 and Later Model Year New Gasoline Fueled, Natural Gas-Fueled, Liquefied... certification of part of his product line. The selection of test vehicles (or test engines) and the computation...

  15. 75 FR 57828 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-22

    ... Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Flight Engineers and Flight Navigators AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice and request... information collection. Information collected is used to determine certification eligibility of Flight...

  16. MIL-STD-1750 Certification Study.

    DTIC Science & Technology

    1980-02-29

    act of conferring certification has associated with it certain liabilities . It is important that the study consider the procedural issues of...certification so that these liabilities are minimized. Some examples of these procedural issues follcw. Ihile the ideal goal of certification is to ensure 100...ccmponents. Vendor suplied and Air force supplied items are separately identified. Cost items are alsc identified as applying to either the vendor or to

  17. 11 CFR 9033.10 - Procedures for initial and final determinations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... when making an initial or final determination based on any of the following reasons. (1) The candidate... candidate's application for certification, as provided in 11 CFR 9033.3; (2) The candidate has failed to satisfy the matching payment threshold requirements, as provided in 11 CFR 9033.4; (3) The candidate is no...

  18. NO and NO2 emission ratios measured from in-use commercial aircraft during taxi and takeoff.

    PubMed

    Herndon, Scott C; Shorter, Joanne H; Zahniser, Mark S; Nelson, David D; Jayne, John; Brown, Robert C; Miake-Lye, Richard C; Waitz, Ian; Silva, Phillip; Lanni, Thomas; Demerjian, Ken; Kolb, Charles E

    2004-11-15

    In August 2001, the Aerodyne Mobile Laboratory simultaneously measured NO, NO2, and CO2 within 350 m of a taxiway and 550 m of a runway at John F. Kennedy Airport. The meteorological conditions were such that taxi and takeoff plumes from individual aircraft were clearly resolved against background levels. NO and NO2 concentrations were measured with 1 s time resolution using a dual tunable infrared laser differential absorption spectroscopy instrument, utilizing an astigmatic multipass Herriott cell. The CO2 measurements were also obtained at 1 s time resolution using a commercial non-dispersive infrared absorption instrument. Plumes were measured from over 30 individual planes, ranging from turbo props to jumbo jets. NOx emission indices were determined by examining the correlation between NOx (NO + NO2) and CO2 during the plume measurements. Several aircraft tail numbers were unambiguously identified, allowing those specific airframe/engine combinations to be determined. The resulting NOx emission indices from positively identified in-service operating airplanes are compared with the published International Civil Aviation Organization engine certification test database collected on new engines in certification test cells.

  19. 40 CFR 1051.335 - How do I ask EPA to reinstate my suspended certificate?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.335 How do I ask EPA to reinstate my suspended certificate? (a... the reason for noncompliance, propose a remedy for the engine family, and commit to a date for...

  20. 40 CFR 1048.335 - How do I ask EPA to reinstate my suspended certificate?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.335 How do I ask EPA to reinstate my suspended certificate? (a... the reason for noncompliance, propose a remedy for the engine family, and commit to a date for...

  1. 40 CFR 1027.120 - Can I qualify for reduced fees?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.120 Can I qualify for... eligible for a reduced fee: (1) The certificate is to be used for sale of vehicles or engines within the... aggregate projected retail sales price of all vehicles or engines covered by the certificate. (b) Initial...

  2. 40 CFR 1027.120 - Can I qualify for reduced fees?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.120 Can I qualify for... eligible for a reduced fee: (1) The certificate is to be used for sale of vehicles or engines within the... aggregate projected retail sales price of all vehicles or engines covered by the certificate. (b) Initial...

  3. 40 CFR 1027.120 - Can I qualify for reduced fees?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.120 Can I qualify for... eligible for a reduced fee: (1) The certificate is to be used for sale of vehicles or engines within the... aggregate projected retail sales price of all vehicles or engines covered by the certificate. (b) Initial...

  4. 40 CFR 1027.120 - Can I qualify for reduced fees?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.120 Can I qualify for... eligible for a reduced fee: (1) The certificate is to be used for sale of vehicles or engines within the... aggregate projected retail sales price of all vehicles or engines covered by the certificate. (b) Initial...

  5. 40 CFR 1027.120 - Can I qualify for reduced fees?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.120 Can I qualify for... eligible for a reduced fee: (1) The certificate is to be used for sale of vehicles or engines within the... aggregate projected retail sales price of all vehicles or engines covered by the certificate. (b) Initial...

  6. 40 CFR Table 3 to Subpart IIIi of... - Certification Requirements for Stationary Fire Pump Engines

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Certification Requirements for Stationary Fire Pump Engines 3 Table 3 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Compression Ignition Internal Combustion Engines Part 60, Subpt...

  7. 76 FR 81008 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... Certification Procedures for Changed Products AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice... INFORMATION: OMB Control Number: 2120-0657. Title: Type Certification Procedures for Changed Products. Form... appropriate Federal Aviation Administration (FAA) Aircraft Certification Office by an aircraft/product...

  8. 40 CFR 92.125 - Pre-test procedures and preconditioning.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Pre-test procedures and... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.125 Pre-test procedures and preconditioning. (a) Locomotive testing. (1) Determine engine lubricating...

  9. 40 CFR 92.125 - Pre-test procedures and preconditioning.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Pre-test procedures and... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.125 Pre-test procedures and preconditioning. (a) Locomotive testing. (1) Determine engine lubricating...

  10. 40 CFR 92.125 - Pre-test procedures and preconditioning.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Pre-test procedures and... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.125 Pre-test procedures and preconditioning. (a) Locomotive testing. (1) Determine engine lubricating...

  11. 40 CFR 92.125 - Pre-test procedures and preconditioning.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Pre-test procedures and... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.125 Pre-test procedures and preconditioning. (a) Locomotive testing. (1) Determine engine lubricating...

  12. Annual Certification Data for Vehicles and Engines

    EPA Pesticide Factsheets

    The Annual Certification Test Results Report (often referred to as Federal Register Test Results Report) includes light-duty vehicle and heavy-duty engine reports of projected emission levels at the end of the useful life of a vehicle.

  13. 14 CFR 183.11 - Selection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... forensic pathologists to assist in the medical investigation of aircraft accidents. (b) Any local Flight... Certification Office, or the Manager's designee, may select Designated Engineering Representatives from... Engineering Representative.” (2) The Manager, Aircraft Certification Directorate, or the Manager's designee...

  14. 14 CFR 183.11 - Selection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... forensic pathologists to assist in the medical investigation of aircraft accidents. (b) Any local Flight... Certification Office, or the Manager's designee, may select Designated Engineering Representatives from... Engineering Representative.” (2) The Manager, Aircraft Certification Directorate, or the Manager's designee...

  15. 14 CFR 183.11 - Selection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... forensic pathologists to assist in the medical investigation of aircraft accidents. (b) Any local Flight... Certification Office, or the Manager's designee, may select Designated Engineering Representatives from... Engineering Representative.” (2) The Manager, Aircraft Certification Directorate, or the Manager's designee...

  16. 14 CFR 183.11 - Selection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... forensic pathologists to assist in the medical investigation of aircraft accidents. (b) Any local Flight... Certification Office, or the Manager's designee, may select Designated Engineering Representatives from... Engineering Representative.” (2) The Manager, Aircraft Certification Directorate, or the Manager's designee...

  17. Full power level development of the Space Shuttle main engine

    NASA Technical Reports Server (NTRS)

    Johnson, J. R.; Colbo, H. I.

    1982-01-01

    Development of the Space Shuttle main engine for nominal operation at full power level (109 percent rated power) is continuing in parallel with the successful flight testing of the Space Transportation System. Verification of changes made to the rated power level configuration currently being flown on the Orbiter Columbia is in progress and the certification testing of the full power level configuration has begun. The certification test plan includes the accumulation of 10,000 seconds on each of two engines by early 1983. Certification testing includes the simulation of nominal mission duty cycles as well as the two abort thrust profiles: abort to orbit and return to launch site. Several of the certification tests are conducted at 111 percent power to demonstrate additional safety margins. In addition to the flight test and development program results, future plans for life demonstration and engine uprating will be discussed.

  18. 75 FR 69165 - Conductor Certification

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-10

    ...FRA proposes to prescribe regulations for certification of conductors, as required by the Rail Safety Improvement Act of 2008. The proposed rule would require railroads to have a formal program for certifying conductors. As part of that program, railroads would be required to have a formal process for training prospective conductors and determining that all persons are competent before permitting them to serve as a conductor. FRA is proposing this regulation to ensure that only those persons who meet minimum Federal safety standards serve as conductors, to reduce the rate and number of accidents and incidents, and to improve railroad safety. Although this NPRM does not propose any specific amendments to the regulation governing locomotive engineer certification, it does highlight areas in that regulation that may require conforming changes.

  19. 40 CFR 86.1439 - Certification Short Test emission test procedures-EPA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) Emission Regulations for New Gasoline-Fueled Otto-Cycle Light-Duty Vehicles and New Gasoline-Fueled Otto-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1439 Certification Short... seconds (mt=30), whichever comes second. (B) The vehicle fails the idle mode and the test is immediately...

  20. 40 CFR 86.1439 - Certification Short Test emission test procedures-EPA.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) Emission Regulations for New Gasoline-Fueled Otto-Cycle Light-Duty Vehicles and New Gasoline-Fueled Otto-Cycle Light-Duty Trucks; Certification Short Test Procedures § 86.1439 Certification Short... seconds (mt=30), whichever comes second. (B) The vehicle fails the idle mode and the test is immediately...

  1. 12 CFR 1209.13 - Good faith certification.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Good faith certification. 1209.13 Section 1209... PROCEDURE Rules of Practice and Procedure § 1209.13 Good faith certification. (a) General requirement. Every... warranted by existing law or a good faith, non-frivolous argument for the extension, modification, or...

  2. 12 CFR 1209.13 - Good faith certification.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Good faith certification. 1209.13 Section 1209... PROCEDURE Rules of Practice and Procedure § 1209.13 Good faith certification. (a) General requirement. Every... warranted by existing law or a good faith, non-frivolous argument for the extension, modification, or...

  3. 12 CFR 1209.13 - Good faith certification.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Good faith certification. 1209.13 Section 1209... PROCEDURE Rules of Practice and Procedure § 1209.13 Good faith certification. (a) General requirement. Every... warranted by existing law or a good faith, non-frivolous argument for the extension, modification, or...

  4. 24 CFR 200.937 - Supplementary specific procedural requirements under HUD building product standards and...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... requirements under HUD building product standards and certification program for plastic bathtub units, plastic... procedural requirements under HUD building product standards and certification program for plastic bathtub... product certification program. In the case of plastic bathroom fixtures, testing and inspection shall be...

  5. 40 CFR 86.884-5 - Test procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Test procedures. 86.884-5 Section 86... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-5 Test procedures. The procedures described in this and subsequent sections will be the test program to determine the conformity of engines...

  6. 40 CFR 86.884-5 - Test procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Test procedures. 86.884-5 Section 86... Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-5 Test procedures. The procedures described in this and subsequent sections will be the test program to determine the conformity of engines with the...

  7. 40 CFR 92.125 - Pre-test procedures and preconditioning.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Pre-test procedures and preconditioning... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.125 Pre-test procedures and preconditioning. (a) Locomotive testing. (1) Determine engine lubricating...

  8. Noise levels and flight profiles of eight helicopters using proposed international certification procedures

    DOT National Transportation Integrated Search

    1979-03-01

    This document reports the findings of helicopter noise tests conducted at the FAA National Aviation Facility Experimental Center (nafec), located in Atlantic City, New Jersey. The tests were conducted with the following objectives: first, determine t...

  9. 42 CFR 493.643 - Fee for determination of program compliance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... laboratory's scope and volume of testing (excluding tests performed for quality control, quality assurance... procedure or examination for a single analyte. (Tests performed for quality control, quality assurance, and... HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS General Administration...

  10. 23 CFR 657.15 - Certification content.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Certification content. 657.15 Section 657.15 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.15 Certification content. The certification shall consist of the following elements and each element...

  11. 23 CFR 657.15 - Certification content.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Certification content. 657.15 Section 657.15 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.15 Certification content. The certification shall consist of the following elements and each element...

  12. 23 CFR 657.15 - Certification content.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Certification content. 657.15 Section 657.15 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.15 Certification content. The certification shall consist of the following elements and each element...

  13. 23 CFR 657.15 - Certification content.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Certification content. 657.15 Section 657.15 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.15 Certification content. The certification shall consist of the following elements and each element...

  14. 23 CFR 657.15 - Certification content.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Certification content. 657.15 Section 657.15 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.15 Certification content. The certification shall consist of the following elements and each element...

  15. Update on CMH-17 Volume 5: Ceramic Matrix Composites

    NASA Technical Reports Server (NTRS)

    David, Kaia; Pierce, Jennifer; Kiser, James; Keith, William P.; Wilson, Gregory S.

    2015-01-01

    CMC components are projected to enter service in commercial aircraft in 2016. A wide range of issues must be addressed prior to certification of this hardware. The Composite Materials Handbook-17, Volume 5 on ceramic matrix composites is being revised to support FAA certification of CMCs for hot structure and other elevated temperature applications. The handbook supports the development and use of CMCs through publishing and maintaining proven, reliable engineering information and standards that have been thoroughly reviewed. Volume 5 will contain detailed sections describing CMC materials processing, design analysis guidelines, testing procedures, and data analysis and acceptance. A review of the status of and plans for two of these areas, which are being addressed by the M and P Working Group and the Testing Working Group, will be presented along with a timeline for the preparation of CMH-17, Volume 5.

  16. 21 CFR 80.35 - Color additive mixtures; certification and exemption from certification.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Color additive mixtures; certification and... HEALTH AND HUMAN SERVICES GENERAL COLOR ADDITIVE CERTIFICATION Certification Procedures § 80.35 Color additive mixtures; certification and exemption from certification. (a) Color additive mixtures to be...

  17. 21 CFR 80.35 - Color additive mixtures; certification and exemption from certification.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Color additive mixtures; certification and... HEALTH AND HUMAN SERVICES GENERAL COLOR ADDITIVE CERTIFICATION Certification Procedures § 80.35 Color additive mixtures; certification and exemption from certification. (a) Color additive mixtures to be...

  18. 21 CFR 80.35 - Color additive mixtures; certification and exemption from certification.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Color additive mixtures; certification and... HEALTH AND HUMAN SERVICES GENERAL COLOR ADDITIVE CERTIFICATION Certification Procedures § 80.35 Color additive mixtures; certification and exemption from certification. (a) Color additive mixtures to be...

  19. 40 CFR 86.091-7 - Maintenance of records; submittal of information; right of entry.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... certification testing, to translation of designs from the test stage to the production stage, or to vehicle (or...) In the case where a current production engine is modified for use in a certification vehicle (or as a... from a current production engine, a general description of the buildup of the engine (e.g...

  20. 40 CFR 89.609 - Final admission of modification nonroad engines and test nonroad engines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Independent Commercial Importer (ICI) possessing a currently valid certificate of conformity only if: (1) The nonroad engine is six original production years old or older; and (2) The ICI's name has not been placed..., as described in paragraph (e) of this section; and (3) The ICI has a currently valid certificate of...

  1. 23 CFR Appendix A to Subpart B of... - Guide Letter of Certification by State Engineer

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Guide Letter of Certification by State Engineer A Appendix A to Subpart B of Part 637 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... State Engineer Date Project No. This is to certify that: The results of the tests used in the acceptance...

  2. 23 CFR Appendix A to Subpart B of... - Guide Letter of Certification by State Engineer

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Guide Letter of Certification by State Engineer A Appendix A to Subpart B of Part 637 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... State Engineer Date Project No. This is to certify that: The results of the tests used in the acceptance...

  3. 23 CFR Appendix A to Subpart B of... - Guide Letter of Certification by State Engineer

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Guide Letter of Certification by State Engineer A Appendix A to Subpart B of Part 637 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... State Engineer Date Project No. This is to certify that: The results of the tests used in the acceptance...

  4. 23 CFR Appendix A to Subpart B of... - Guide Letter of Certification by State Engineer

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Guide Letter of Certification by State Engineer A Appendix A to Subpart B of Part 637 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... State Engineer Date Project No. This is to certify that: The results of the tests used in the acceptance...

  5. 23 CFR Appendix A to Subpart B of... - Guide Letter of Certification by State Engineer

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Guide Letter of Certification by State Engineer A Appendix A to Subpart B of Part 637 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... State Engineer Date Project No. This is to certify that: The results of the tests used in the acceptance...

  6. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... certificated takeoff and landing weights of an airplane equipped with a type-certificated standby power rocket engine may obtain an increase as specified in paragraph (b) if— (1) The installation of the rocket engine has been approved and it has been established by flight test that the rocket engine and its controls...

  7. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... certificated takeoff and landing weights of an airplane equipped with a type-certificated standby power rocket engine may obtain an increase as specified in paragraph (b) if— (1) The installation of the rocket engine has been approved and it has been established by flight test that the rocket engine and its controls...

  8. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... certificated takeoff and landing weights of an airplane equipped with a type-certificated standby power rocket engine may obtain an increase as specified in paragraph (b) if— (1) The installation of the rocket engine has been approved and it has been established by flight test that the rocket engine and its controls...

  9. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... certificated takeoff and landing weights of an airplane equipped with a type-certificated standby power rocket engine may obtain an increase as specified in paragraph (b) if— (1) The installation of the rocket engine has been approved and it has been established by flight test that the rocket engine and its controls...

  10. 14 CFR Appendix E to Part 25 - Appendix E to Part 25

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... certificated takeoff and landing weights of an airplane equipped with a type-certificated standby power rocket engine may obtain an increase as specified in paragraph (b) if— (1) The installation of the rocket engine has been approved and it has been established by flight test that the rocket engine and its controls...

  11. Construction Performance Optimization toward Green Building Premium Cost Based on Greenship Rating Tools Assessment with Value Engineering Method

    NASA Astrophysics Data System (ADS)

    Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Riswanto; Budiman, Rachmat

    2017-07-01

    Green building concept becomes important in current building life cycle to mitigate environment issues. The purpose of this paper is to optimize building construction performance towards green building premium cost, achieving green building rating tools with optimizing life cycle cost. Therefore, this study helps building stakeholder determining building fixture to achieve green building certification target. Empirically the paper collects data of green building in the Indonesian construction industry such as green building fixture, initial cost, operational and maintenance cost, and certification score achievement. After that, using value engineering method optimized green building fixture based on building function and cost aspects. Findings indicate that construction performance optimization affected green building achievement with increasing energy and water efficiency factors and life cycle cost effectively especially chosen green building fixture.

  12. 76 FR 74665 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-01

    ... Certificate (STC) ST00753NY (Transport Canada Civil Aviation (TCCA) STC SA97-106) installed. This AD results... unsafe condition as: It has been determined that modifications by DECA Aviation Engineering Limited on... INFORMATION: Discussion The Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada...

  13. 42 CFR 488.12 - Effect of survey agency certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Effect of survey agency certification. 488.12... SERVICES (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES General Provisions § 488.12 Effect of survey agency certification. Certifications by the State survey agency...

  14. 12 CFR 19.7 - Good faith certification.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Good faith certification. 19.7 Section 19.7... PROCEDURE Uniform Rules of Practice and Procedure § 19.7 Good faith certification. (a) General requirement... warranted by existing law or a good faith argument for the extension, modification, or reversal of existing...

  15. 12 CFR 308.7 - Good faith certification.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Good faith certification. 308.7 Section 308.7... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 308.7 Good faith certification. (a... in fact and is warranted by existing law or a good faith argument for the extension, modification, or...

  16. 12 CFR 19.7 - Good faith certification.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Good faith certification. 19.7 Section 19.7... PROCEDURE Uniform Rules of Practice and Procedure § 19.7 Good faith certification. (a) General requirement... warranted by existing law or a good faith argument for the extension, modification, or reversal of existing...

  17. 12 CFR 19.7 - Good faith certification.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Good faith certification. 19.7 Section 19.7... PROCEDURE Uniform Rules of Practice and Procedure § 19.7 Good faith certification. (a) General requirement... warranted by existing law or a good faith argument for the extension, modification, or reversal of existing...

  18. 12 CFR 308.7 - Good faith certification.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Good faith certification. 308.7 Section 308.7... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 308.7 Good faith certification. (a... in fact and is warranted by existing law or a good faith argument for the extension, modification, or...

  19. 12 CFR 308.7 - Good faith certification.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Good faith certification. 308.7 Section 308.7... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 308.7 Good faith certification. (a... in fact and is warranted by existing law or a good faith argument for the extension, modification, or...

  20. 12 CFR 19.7 - Good faith certification.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Good faith certification. 19.7 Section 19.7... PROCEDURE Uniform Rules of Practice and Procedure § 19.7 Good faith certification. (a) General requirement... warranted by existing law or a good faith argument for the extension, modification, or reversal of existing...

  1. 12 CFR 308.7 - Good faith certification.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Good faith certification. 308.7 Section 308.7... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 308.7 Good faith certification. (a... in fact and is warranted by existing law or a good faith argument for the extension, modification, or...

  2. 12 CFR 308.7 - Good faith certification.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Good faith certification. 308.7 Section 308.7... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 308.7 Good faith certification. (a... in fact and is warranted by existing law or a good faith argument for the extension, modification, or...

  3. 12 CFR 19.7 - Good faith certification.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Good faith certification. 19.7 Section 19.7... PROCEDURE Uniform Rules of Practice and Procedure § 19.7 Good faith certification. (a) General requirement... warranted by existing law or a good faith argument for the extension, modification, or reversal of existing...

  4. 27 CFR 26.264 - Determination of tax on wine.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... wine. 26.264 Section 26.264 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Procedure at Port of Entry From the Virgin Islands § 26.264 Determination of tax on wine. If the certificate prescribed in § 26.205 covers wine, the wine tax will be collected at the rates imposed by section 5041...

  5. 38 CFR 36.4340 - Underwriting standards, processing procedures, lender responsibility, and lender certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... expenditure levels in individual cases. This factor may be given consideration in the final determination in... discounting of income on account of sex, marital status, or any other basis prohibited by the Equal Credit... that a determination can be made that the occupancy requirements of the law will be met. Also...

  6. Application for certification 1988 model year light-duty vehicles - US Technical Research Company (Peugeot)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings that describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems.

  7. 33 CFR 276.6 - General policy.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

  8. 33 CFR 276.6 - General policy.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

  9. 33 CFR 276.6 - General policy.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

  10. 76 FR 55847 - Inspection of Towing Vessels

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-09

    ... approval of third-party auditors and surveyors, and procedures for obtaining Certificates of Inspection... approval of third-party auditors and surveyors, and procedures for obtaining Certificates of Inspection...

  11. 34 CFR 668.13 - Certification procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... administrator or a high level institutional official the chief administrator designates. (3)(i) An institution...) of this section, the Secretary may grant or deny the waiver, require another institutional official... this subpart; (2) That the Secretary determines has jeopardized its ability to perform its financial...

  12. 40 CFR Appendix C to Part 75 - Missing Data Estimation Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... certification of a parametric, empirical, or process simulation method or model for calculating substitute data... available process simulation methods and models. 1.2Petition Requirements Continuously monitor, determine... desulfurization, a corresponding empirical correlation or process simulation parametric method using appropriate...

  13. 29 CFR 1926.1427 - Operator qualification and certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... determination that industry recognized criteria for written testing materials, practical examinations, test... tests that: (A) Assess the operator applicant regarding, at a minimum, the knowledge and skills listed... an operator applicant fails a test or is decertified. (iv) Have testing procedures for re...

  14. 29 CFR 1926.1427 - Operator qualification and certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... determination that industry recognized criteria for written testing materials, practical examinations, test... tests that: (A) Assess the operator applicant regarding, at a minimum, the knowledge and skills listed... an operator applicant fails a test or is decertified. (iv) Have testing procedures for re...

  15. 29 CFR 1926.1427 - Operator qualification and certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... determination that industry recognized criteria for written testing materials, practical examinations, test... tests that: (A) Assess the operator applicant regarding, at a minimum, the knowledge and skills listed... an operator applicant fails a test or is decertified. (iv) Have testing procedures for re...

  16. 29 CFR 1926.1427 - Operator qualification and certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... determination that industry recognized criteria for written testing materials, practical examinations, test... tests that: (A) Assess the operator applicant regarding, at a minimum, the knowledge and skills listed... an operator applicant fails a test or is decertified. (iv) Have testing procedures for re...

  17. 47 CFR 54.410 - Certification and Verification of Consumer Qualification for Lifeline.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Certification and Verification of Consumer... § 54.410 Certification and Verification of Consumer Qualification for Lifeline. (a) Certification of... within that calendar year. (b) Self-certifications. After income certification procedures are implemented...

  18. Certification Manual for Wisconsin Public Librarians. Bulletin No. 94111.

    ERIC Educational Resources Information Center

    Lamb, Donald K.

    This manual contains the guidelines and procedures for public librarian certification and certification renewal in Wisconsin. Certification is not required for library personnel other than administrators, but nonadministrators may apply for certification at the level for which they are eligible. Requirements for voluntary library certification are…

  19. 40 CFR 94.512 - Suspension and revocation of certificates of conformity.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) The Administrator may suspend the certificate of conformity for an engine family which is in noncompliance pursuant to § 94.510(b), thirty days after the engine family is deemed to be in noncompliance. (c... thirty days from the time an engine family is deemed to be in noncompliance under §§ 94.508(d), 94.510(a...

  20. Space Shuttle Main Engine Liquid Air Insulation Redesign Lessons Learned

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell; Carroll, Paul; Head, Kenneth; Fasheh, John; Stuart, Jessica

    2010-01-01

    The Space Shuttle Main Engine Liquid Air Insulation redesign was required to prevent the reoccurance of the STS-111 High Pressure Speed Sensor In-Flight Anomaly. The STS-111 In-Flight Anomaly Failure Investigation Team's initial redesign of the High Pressure Fuel Turbopump Pump End Ball Bearing Liquid Air Insulation failed the certification test by producing Liquid Air. The certification test failure indicated not only the High Pressure Fuel Turbopump Liquid Air Insulation, but all other Space Shuttle Main Engine Liquid Air Insulation. This paper will document the original Space Shuttle Main Engine Liquid Air STS-111 In-Flight Anomaly investigation, the heritage Space Shuttle Main Engine Insulation certification testing faults, the techniques and instrumentation used to accurately test the Liquid Air Insulation systems on the Stennis Space Center SSME test stand, the analysis techniques used to identify the Liquid Air Insulation problem areas and the analytical verification of the redesign before entering certification testing, Trade study down selected to three potential design solutions, the results of the development testing which down selected the final Liquid Air Redesign are also documented within this paper.

  1. 14 CFR 1.1 - General definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...; landplane; and seaplane. Clearway means: (1) For turbine engine powered airplanes certificated after August... located to each side of the runway. (2) For turbine engine powered airplanes certificated after September... system parts, wiring, air ducts, fittings, and powerplant controls, means the capacity to perform the...

  2. 14 CFR 1.1 - General definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...; landplane; and seaplane. Clearway means: (1) For turbine engine powered airplanes certificated after August... located to each side of the runway. (2) For turbine engine powered airplanes certificated after September... system parts, wiring, air ducts, fittings, and powerplant controls, means the capacity to perform the...

  3. 14 CFR 1.1 - General definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...; landplane; and seaplane. Clearway means: (1) For turbine engine powered airplanes certificated after August... located to each side of the runway. (2) For turbine engine powered airplanes certificated after September... system parts, wiring, air ducts, fittings, and powerplant controls, means the capacity to perform the...

  4. 14 CFR 1.1 - General definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...; balloon; landplane; and seaplane. Clearway means: (1) For turbine engine powered airplanes certificated... they are located to each side of the runway. (2) For turbine engine powered airplanes certificated... system parts, wiring, air ducts, fittings, and powerplant controls, means the capacity to perform the...

  5. 14 CFR 1.1 - General definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...; balloon; landplane; and seaplane. Clearway means: (1) For turbine engine powered airplanes certificated... they are located to each side of the runway. (2) For turbine engine powered airplanes certificated... system parts, wiring, air ducts, fittings, and powerplant controls, means the capacity to perform the...

  6. 10 CFR 76.72 - Miscellaneous procedural matters.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Miscellaneous procedural matters. 76.72 Section 76.72 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Certification § 76.72 Miscellaneous procedural matters. (a) The filing of any petitions for review or any responses...

  7. 10 CFR 76.72 - Miscellaneous procedural matters.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Miscellaneous procedural matters. 76.72 Section 76.72 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Certification § 76.72 Miscellaneous procedural matters. (a) The filing of any petitions for review or any responses...

  8. 10 CFR 76.72 - Miscellaneous procedural matters.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Miscellaneous procedural matters. 76.72 Section 76.72 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Certification § 76.72 Miscellaneous procedural matters. (a) The filing of any petitions for review or any responses...

  9. 10 CFR 76.72 - Miscellaneous procedural matters.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Miscellaneous procedural matters. 76.72 Section 76.72 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Certification § 76.72 Miscellaneous procedural matters. (a) The filing of any petitions for review or any responses...

  10. 10 CFR 76.72 - Miscellaneous procedural matters.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Miscellaneous procedural matters. 76.72 Section 76.72 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Certification § 76.72 Miscellaneous procedural matters. (a) The filing of any petitions for review or any responses...

  11. 40 CFR 75.20 - Initial certification and recertification procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

  12. 40 CFR 75.20 - Initial certification and recertification procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

  13. 40 CFR 75.20 - Initial certification and recertification procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

  14. 14 CFR 21.41 - Type certificate.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.41 Type certificate. Each type certificate is considered to include the type design, the operating limitations, the certificate data sheet, the applicable... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Type certificate. 21.41 Section 21.41...

  15. 14 CFR 21.41 - Type certificate.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.41 Type certificate. Each type certificate is considered to include the type design, the operating limitations, the certificate data sheet, the applicable... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Type certificate. 21.41 Section 21.41...

  16. 14 CFR 21.41 - Type certificate.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.41 Type certificate. Each type certificate is considered to include the type design, the operating limitations, the certificate data sheet, the applicable... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Type certificate. 21.41 Section 21.41...

  17. 14 CFR 21.41 - Type certificate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.41 Type certificate. Each type certificate is considered to include the type design, the operating limitations, the certificate data sheet, the applicable... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Type certificate. 21.41 Section 21.41...

  18. 14 CFR 21.41 - Type certificate.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.41 Type certificate. Each type certificate is considered to include the type design, the operating limitations, the certificate data sheet, the applicable... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Type certificate. 21.41 Section 21.41...

  19. 14 CFR 67.409 - Denial of medical certificate.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Denial of medical certificate. 67.409... (CONTINUED) AIRMEN MEDICAL STANDARDS AND CERTIFICATION Certification Procedures § 67.409 Denial of medical certificate. (a) Any person who is denied a medical certificate by an aviation medical examiner may, within 30...

  20. 14 CFR 67.409 - Denial of medical certificate.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Denial of medical certificate. 67.409... (CONTINUED) AIRMEN MEDICAL STANDARDS AND CERTIFICATION Certification Procedures § 67.409 Denial of medical certificate. (a) Any person who is denied a medical certificate by an aviation medical examiner may, within 30...

  1. 40 CFR 80.177 - Certification test fuels for use with the alternative test procedures and standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Certification test fuels for use with... Detergent Gasoline § 80.177 Certification test fuels for use with the alternative test procedures and standards. (a) General requirements. This section provides specifications for the test fuels required in...

  2. 40 CFR 65.64 - Group determination procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... accepted chemical engineering principles, measurable process parameters, or physical or chemical laws or... stream volumetric flow shall be corrected to 2.3 percent moisture; or (2) The engineering assessment... section or by using the engineering assessment procedures in paragraph (i) of this section. (1) The net...

  3. 40 CFR 65.64 - Group determination procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... accepted chemical engineering principles, measurable process parameters, or physical or chemical laws or... stream volumetric flow shall be corrected to 2.3 percent moisture; or (2) The engineering assessment... section or by using the engineering assessment procedures in paragraph (i) of this section. (1) The net...

  4. 40 CFR 63.1412 - Continuous process vent applicability assessment procedures and methods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engineering principles, measurable process parameters, or physical or chemical laws or properties. Examples of... values, and engineering assessment control applicability assessment requirements are to be determined... by using the engineering assessment procedures in paragraph (k) of this section. (f) Volumetric flow...

  5. 40 CFR 63.1412 - Continuous process vent applicability assessment procedures and methods.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... engineering principles, measurable process parameters, or physical or chemical laws or properties. Examples of... values, and engineering assessment control applicability assessment requirements are to be determined... by using the engineering assessment procedures in paragraph (k) of this section. (f) Volumetric flow...

  6. 40 CFR 63.1412 - Continuous process vent applicability assessment procedures and methods.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... engineering principles, measurable process parameters, or physical or chemical laws or properties. Examples of... values, and engineering assessment control applicability assessment requirements are to be determined... by using the engineering assessment procedures in paragraph (k) of this section. (f) Volumetric flow...

  7. 40 CFR 63.1412 - Continuous process vent applicability assessment procedures and methods.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... engineering principles, measurable process parameters, or physical or chemical laws or properties. Examples of... values, and engineering assessment control applicability assessment requirements are to be determined... by using the engineering assessment procedures in paragraph (k) of this section. (f) Volumetric flow...

  8. 40 CFR 63.1412 - Continuous process vent applicability assessment procedures and methods.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... engineering principles, measurable process parameters, or physical or chemical laws or properties. Examples of... values, and engineering assessment control applicability assessment requirements are to be determined... by using the engineering assessment procedures in paragraph (k) of this section. (f) Volumetric flow...

  9. 40 CFR 65.64 - Group determination procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... accepted chemical engineering principles, measurable process parameters, or physical or chemical laws or... stream volumetric flow shall be corrected to 2.3 percent moisture; or (2) The engineering assessment... section or by using the engineering assessment procedures in paragraph (i) of this section. (1) The net...

  10. 40 CFR 65.64 - Group determination procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... accepted chemical engineering principles, measurable process parameters, or physical or chemical laws or... stream volumetric flow shall be corrected to 2.3 percent moisture; or (2) The engineering assessment... section or by using the engineering assessment procedures in paragraph (i) of this section. (1) The net...

  11. 40 CFR 91.123 - Denial, revocation of certificate of conformity.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ....203(f), 91.206(d), 91.208(c) or 91.209(g), the Administrator may void such certificate ab initio. (d) When the Administrator denies, revokes, or voids ab initio a certificate of conformity, the engine... makes the certificate void ab initio. ...

  12. 40 CFR 91.123 - Denial, revocation of certificate of conformity.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ....203(f), 91.206(d), 91.208(c) or 91.209(g), the Administrator may void such certificate ab initio. (d) When the Administrator denies, revokes, or voids ab initio a certificate of conformity, the engine... makes the certificate void ab initio. ...

  13. 40 CFR 91.123 - Denial, revocation of certificate of conformity.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ....203(f), 91.206(d), 91.208(c) or 91.209(g), the Administrator may void such certificate ab initio. (d) When the Administrator denies, revokes, or voids ab initio a certificate of conformity, the engine... makes the certificate void ab initio. ...

  14. 40 CFR 91.123 - Denial, revocation of certificate of conformity.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ....203(f), 91.206(d), 91.208(c) or 91.209(g), the Administrator may void such certificate ab initio. (d) When the Administrator denies, revokes, or voids ab initio a certificate of conformity, the engine... makes the certificate void ab initio. ...

  15. 40 CFR 91.123 - Denial, revocation of certificate of conformity.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ....203(f), 91.206(d), 91.208(c) or 91.209(g), the Administrator may void such certificate ab initio. (d) When the Administrator denies, revokes, or voids ab initio a certificate of conformity, the engine... makes the certificate void ab initio. ...

  16. IMCS reflight certification requirements and design specifications

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The requirements for reflight certification are established. Software requirements encompass the software programs that are resident in the PCC, DEP, PDSS, EC, or any related GSE. A design approach for the reflight software packages is recommended. These designs will be of sufficient detail to permit the implementation of reflight software. The PDSS/IMC Reflight Certification system provides the tools and mechanisms for the user to perform the reflight certification test procedures, test data capture, test data display, and test data analysis. The system as defined will be structured to permit maximum automation of reflight certification procedures and test data analysis.

  17. IFCC primary reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 °C. Part 9: reference procedure for the measurement of catalytic concentration of alkaline phosphatase International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) Scientific Division, Committee on Reference Systems of Enzymes (C-RSE) (1)).

    PubMed

    Schumann, Gerhard; Klauke, Rainer; Canalias, Francesca; Bossert-Reuther, Steffen; Franck, Paul F H; Gella, F-Javier; Jørgensen, Poul J; Kang, Dongchon; Lessinger, Jean-Marc; Panteghini, Mauro; Ceriotti, Ferruccio

    2011-09-01

    Abstract This paper is the ninth in a series dealing with reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 °C and the certification of reference preparations. Other parts deal with: Part 1. The concept of reference procedures for the measurement of catalytic activity concentrations of enzymes; Part 2. Reference procedure for the measurement of catalytic concentration of creatine kinase; Part 3. Reference procedure for the measurement of catalytic concentration of lactate dehydrogenase; Part 4. Reference procedure for the measurement of catalytic concentration of alanine aminotransferase; Part 5. Reference procedure for the measurement of catalytic concentration of aspartate aminotransferase; Part 6. Reference procedure for the measurement of catalytic concentration of γ-glutamyltransferase; Part 7. Certification of four reference materials for the determination of enzymatic activity of γ-glutamyltransferase, lactate dehydrogenase, alanine aminotransferase and creatine kinase at 37 °C; Part 8. Reference procedure for the measurement of catalytic concentration of α-amylase. The procedure described here is derived from the previously described 30 °C IFCC reference method. Differences are tabulated and commented on in Appendix 1.

  18. Association of gender and specialty interest with video-gaming, three-dimensional spatial analysis, and entry-level laparoscopic skills in third-year veterinary students.

    PubMed

    Bragg, Heather R; Towle Millard, Heather A; Millard, Ralph P; Constable, Peter D; Freeman, Lyn J

    2016-06-15

    OBJECTIVE To determine whether gender or interest in pursuing specialty certification in internal medicine or surgery was associated with video-gaming, 3-D spatial analysis, or entry-level laparoscopic skills in third-year veterinary students. DESIGN Cross-sectional study. SAMPLE A convenience sample of 68 (42 female and 26 male) third-year veterinary students. PROCEDURES Participants completed a survey asking about their interest in pursuing specialty certification in internal medicine or surgery. Subsequently, participants' entry-level laparoscopic skills were assessed with 3 procedures performed in box trainers, their video-gaming skills were tested with 3 video games, and their 3-D spatial analysis skills were evaluated with the Purdue University Visualization of Rotations Spatial Test. Scores were assigned for laparoscopic, video-gaming, and 3-D spatial analysis skills. RESULTS Significantly more female than male students were interested in pursuing specialty certification in internal medicine (23/42 vs 7/26), and significantly more male than female students were interested in pursuing specialty certification in surgery (19/26 vs 19/42). Males had significantly higher video-gaming skills scores than did females, but spatial analysis and laparoscopic skills scores did not differ between males and females. Students interested in pursuing specialty certification in surgery had higher video-gaming and spatial analysis skills scores than did students interested in pursuing specialty certification in internal medicine, but laparoscopic skills scores did not differ between these 2 groups. CONCLUSIONS AND CLINICAL RELEVANCE For this group of students, neither gender nor interest in specialty certification in internal medicine versus surgery was associated with entry-level laparoscopy skills.

  19. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered by...

  20. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered by...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top