Certification Manual for Wisconsin Public Library Directors.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This manual is intended to serve as a guide for public library directors and boards of trustees in meeting the requirements of Wisconsin's public librarian certification law which requires certification for administrators of public library systems, county libraries, county library services, and municipal public libraries. The manual contains the…

30 CFR 27.6 - Certification of components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... APPROVAL OF MINING PRODUCTS METHANE-MONITORING SYSTEMS General Provisions § 27.6 Certification of... intended for use in a certified methane-monitoring system as evidence that further inspection and test of...

30 CFR 27.6 - Certification of components.

Code of Federal Regulations, 2011 CFR

2011-07-01

... APPROVAL OF MINING PRODUCTS METHANE-MONITORING SYSTEMS General Provisions § 27.6 Certification of... intended for use in a certified methane-monitoring system as evidence that further inspection and test of...

Characteristics of Certificate Completers with Their Time to Certificate and Labor Market Outcomes. Web Tables. NCES 2013-157

ERIC Educational Resources Information Center

Radwin, David; Matthews, Morgan

2013-01-01

The number of certificates conferred by U.S. postsecondary institutions increased 64 percent in the last decade, from 572,000 in 2000-2001 to 936,000 in 2009-2010, surpassing the 850,000 associate's degrees conferred in 2009-2010. Certificates are overwhelmingly conferred in vocational fields and are intended to prepare students for the growing…

Moderation of Assessment: An Introduction for National Standards Bodies. Developing a Qualifications Framework for New Zealand.

ERIC Educational Resources Information Center

New Zealand Qualifications Authority, Wellington.

This document provides a decision tree to guide the thinking of the staff of New Zealand agencies developing national education and certification standards. It is intended to help them make decisions about moderation of assessment--a process of sampling assessments to ensure that they are consistent with the required standard. After an…

Roles of Commitment and Foreseeability in Understanding Student Attitude Changes toward the Certification Examination in Taiwan

ERIC Educational Resources Information Center

Cheng, Pi-Yueh

2015-01-01

Taiwanese vocational schools are actively promoting opportunities for students to obtain specialized certificates during their formal education. However, because segments of the student population do not intend to achieve certification, questions about how to increase the motivation of students to pursue this goal have arisen. Two experiments…

Demonstration and Research Pest Control: A Training Program for the Certification of Pesticide Applicators, Manual No. 10.

ERIC Educational Resources Information Center

Rust, Harry K.; And Others

This manual is intended to provide the information necessary to meet EPA standards for demonstration and research pest control and prepare for the written examination required for certification. Emphasis is placed on the principles of safe pesticide use. Chapters are included on pesticide applicator certification in Virginia, basics of pest…

Institutional Review Boards’ Use and Understanding of Certificates of Confidentiality

PubMed Central

Beskow, Laura M.; Check, Devon K.; Namey, Emily E.; Dame, Lauren A.; Lin, Li; Cooper, Alexandra; Weinfurt, Kevin P.; Wolf, Leslie E.

2012-01-01

Certificates of Confidentiality, issued by agencies of the U.S. government, are regarded as an important tool for meeting ethical and legal obligations to safeguard research participants’ privacy and confidentiality. By shielding against forced disclosure of identifying data, Certificates are intended to facilitate research on sensitive topics critical to the public’s health. Although Certificates are potentially applicable to an extensive array of research, their full legal effect is unclear, and little is known about stakeholders’ views of the protections they provide. To begin addressing this challenge, we conducted a national survey of institutional review board (IRB) chairs, followed by telephone interviews with selected chairs, to learn more about their familiarity with and opinions about Certificates; their institutions’ use of Certificates; policies and practices concerning when Certificates are required or recommended; and the role Certificates play in assessments of research risk. Overall, our results suggest uncertainty about Certificates among IRB chairs. On most objective knowledge questions, most respondents chose the incorrect answer or ‘unsure’. Among chairs who reported more familiarity with Certificates, composite opinion scores calculated based on five survey questions were evenly distributed among positive, neutral/middle, and negative views. Further, respondents expressed a variety of ideas about the appropriate use of Certificates, what they are intended to protect, and their effect on research risk. Nevertheless, chairs who participated in our study commonly viewed Certificates as a potentially valuable tool, frequently describing them as an ‘extra layer’ of protection. These findings lead to several practical observations concerning the need for more stakeholder education about Certificates, consideration of Certificates for a broader range of studies, the importance of remaining vigilant and using all tools available to protect participants’ confidentiality, and the need for further empirical investigation of Certificates’ effect on researchers and research participants. PMID:22962599

Preparing a Health Care White Paper: Providing Structure to the Writing Process.

PubMed

Rotarius, Timothy; Rotarius, Velmarie

2016-01-01

Health care leaders operate in a very complex and turbulent business environment. Both government regulations and market forces are very active in the industry. Thus, health care managers have many multifaceted and, sometimes, contradictory expectations placed upon them and their organizations. To ensure professional accountability, health care executives often join professional associations and strive for licenses and certifications that are intended to place the professional above the rest. One important avenue to achieve various licensing and certification accomplishments involves writing a white paper about a specific topic of interest to the industry and organization. Presented herein are structural processes that facilitate the creation and preparation of a health care white paper. Both conceptual and empirical structures of white papers are presented, with the similarities and the differences between conceptual and empirical papers highlighted.

29 CFR 1926.403 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... equipment for an identified purpose may be evidenced by listing, labeling, or certification for that... listing, labeling, or certification. (c) Interrupting rating. Equipment intended to break current shall... considered to be grounded. Working space is not required in back of assemblies such as dead-front...

29 CFR 1926.403 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... equipment for an identified purpose may be evidenced by listing, labeling, or certification for that... listing, labeling, or certification. (c) Interrupting rating. Equipment intended to break current shall... considered to be grounded. Working space is not required in back of assemblies such as dead-front...

29 CFR 1926.403 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... equipment for an identified purpose may be evidenced by listing, labeling, or certification for that... listing, labeling, or certification. (c) Interrupting rating. Equipment intended to break current shall... considered to be grounded. Working space is not required in back of assemblies such as dead-front...

Home Energy Professional Certifications (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-11-01

As the weatherization and home energy upgrade industries expand and gain recognition, the need for a qualified workforce becomes more apparent. The certification component of the Guidelines project was designed to create meaningful and lasting careers for weatherization workers. Intended for experienced home energy professionals, the four new certifications focus on the most common jobs in the industry: energy auditor, retrofit installer technician, crew leader, and quality control inspector.

7 CFR 371.4 - Veterinary Services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE... amended, as it pertains to the issuance of certificates of condition of live animals intended and offered... Marketing Act of 1946, as amended, with respect to voluntary inspection and certification of animal products...

7 CFR 371.4 - Veterinary Services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE... amended, as it pertains to the issuance of certificates of condition of live animals intended and offered... Marketing Act of 1946, as amended, with respect to voluntary inspection and certification of animal products...

7 CFR 371.4 - Veterinary Services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE... amended, as it pertains to the issuance of certificates of condition of live animals intended and offered... Marketing Act of 1946, as amended, with respect to voluntary inspection and certification of animal products...

Self-certification and employee training of mail-order distributors of scheduled listed chemical products. Interim final rule with request for comment.

PubMed

2011-04-13

On October 12, 2010, the President signed the Combat Methamphetamine Enhancement Act of 2010 (MEA). It establishes new requirements for mail-order distributors of scheduled listed chemical products. Mail-order distributors must now self-certify to DEA in order to sell scheduled listed chemical products at retail. Sales at retail are those sales intended for personal use; mail-order distributors that sell scheduled listed chemical products not intended for personal use, e.g., sale to a university, are not affected by the new law. This self-certification must include a statement that the mail-order distributor understands each of the requirements that apply under part 1314 and agrees to comply with these requirements. Additionally, mail-order distributors are now required to train their employees prior to self certification. DEA is promulgating this rule to incorporate the statutory provisions and make its regulations consistent with the new requirements and other existing regulations related to self-certification.

Assessment in the context of licensure and certification.

PubMed

Norcini, John J; Lipner, Rebecca S; Grosso, Louis J

2013-01-01

Over the past 25 years, three major forces have had a significant influence on licensure and certification: the shift in focus from educational process to educational outcomes, the increasing recognition of the need for learning and assessment throughout a physician's career, and the changes in technology and psychometrics that have opened new vistas for assessment. These forces have led to significant changes in assessment for licensure and certification. To respond to these forces, licensure and certification programs have improved the ways in which their examinations are constructed, scored, and delivered. In particular, we note the introduction of adaptive testing; automated item creation, scoring, and test assembly; assessment engineering; and data forensics. Licensure and certification programs have also expanded their repertoire of assessments with the rapid development and adoption of simulation and workplace-based assessment. Finally, they have invested in research intended to validate their programs in four ways: (a) the acceptability of the program to stakeholders, (b) the extent to which stakeholders are encouraged to learn and improve, (c) the extent to which there is a relationship between performance in the programs and external measures, and (d) the extent to which there is a relationship between performance as measured by the assessment and performance in practice. Over the past 25 years, changes in licensure and certification have been driven by the educational outcomes movement, the need for lifelong learning, and advances in technology and psychometrics. Over the next 25 years, we expect these forces to continue to exert pressure for change which will lead to additional improvement and expansion in examination processes, methods of assessment, and validation research.

Initial Experimental Airworthiness Certification Guidance for UAS. UAS Experimental Certification Process and Guidance

NASA Technical Reports Server (NTRS)

2005-01-01

This paper addresses the regulatory processes and requirements already in place by which an applicant might obtain experimental airworthiness certification for a civil Unmanned Aircraft System (UAS). It is more extensive and subsequent to an earlier, similar deliverable, PD007, which was an interim study of the same topic. Since few regulatory airworthiness and operating standards exist for UAS like those for traditional manned aircraft and since most UAS have historically been developed and operated under military auspices, civil use of UAS in the NAS is a new and unfamiliar challenge requiring specific and unique considerations. Experimental certification is the most basic level of FAA approval toward routine UAS operation in the NAS. The paper reviews and explains existing FAA requirements for an applicant seeking experimental airworthiness approval and details the process for submission of necessary information. It summarizes the limited purposes for which experimental aircraft may be used and addresses pertinent aspects of UAS design, construction and operation in the NAS in harmony with traditional manned aircraft. Policy IPT position is that UAS, while different from manned aircraft, can use the same initial processes to gain civil operating experience under the experimental approval. Particular note is taken of those UAS-unique characteristics which require extra attention to assure equivalent safety of operation, such as the UAS control station and sense-and-avoid. The paper also provides "best practices" guidance for UAS manufacturers and FAA personnel in two appendices. The material in Appendix A is intended to provide guidance on assuring UAS safety to FAA, and provides FAA personnel with a suggested list of items to review, with a focus on UAS unique factors, prior to issuance of an experimental airworthiness certificate. Appendix B provides an outline for a program letter which a manufacturer could use in preparing the application for an UAS experimental airworthiness certificate.

33 CFR 174.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... spaces inside its structure. Certificate of number means the certificate required by 33 CFR 173.21... harvesting of fish which, either in whole or in part, is intended to enter commerce through sale, barter, or...-purpose accommodation spaces with low freeboard and little or no foredeck or cockpit. Hull identification...

33 CFR 174.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... spaces inside its structure. Certificate of number means the certificate required by 33 CFR 173.21... harvesting of fish which, either in whole or in part, is intended to enter commerce through sale, barter, or...-purpose accommodation spaces with low freeboard and little or no foredeck or cockpit. Hull identification...

33 CFR 174.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... spaces inside its structure. Certificate of number means the certificate required by 33 CFR 173.21... harvesting of fish which, either in whole or in part, is intended to enter commerce through sale, barter, or...-purpose accommodation spaces with low freeboard and little or no foredeck or cockpit. Hull identification...

[Quality Management in Medicine: What the Surgeon Needs to Know].

PubMed

Holtel, M; Roßmüller, T; Frommhold, K

2016-10-01

Quality management (QM) is a method used in the field of economics that was adopted late by the medical sector. The coincidence of quality management and what is referred to as economisation in medicine frequently leads to QM being - incorrectly - perceived as part of the economisation problem rather than as part of its solution. Quality assurance defines and observes key performance indicators for the achievement of quality objectives. QM is a form of active management that intends to systematically exclude the effects of chance. It is supposed to enable those in charge of an institution to deal with complex processes, to influence them and achieve quality even under unfavourable circumstances. Clearly defined written standards are an important aspect of QM and allow for 80 % of patients to be treated faster and less labour-intensively and thus to create more capacity for the individual treatment of the 20 % of patients requiring other than routine care. Standards provide a framework to rely on for department heads and other staff alike. They reduce complexity, support processes in stress situations and prevent inconsistent decisions in the course of treatment. Document management ensures transparent and up-to-date in-house standards and creates continuity. Good documents are short, easy to use, and, at the same time, comply with requirements. Specifications describe in-house standards; validation documents provide a forensically sound documentation. Quality management has a broad impact on an institution. It helps staff reflect on their daily work, and it initiates a reporting and auditing system as well as the systematic management of responses to surveys and complaints. Risk management is another aspect of QM; it provides structures to identify, analyse, assess and modify risks and subject them to risk controlling. Quality management is not necessarily associated with certification. However, if certification is intended, it serves to define requirements, increase motivation for the implementation of measures to be taken, and provide long-term continuity in newly adopted processes. Specialist certificates issued by medical associations frequently emphasise an interdisciplinary treatment approach; however, their certification processes are often of poor quality. The effectiveness and efficiency is evident for individual QM instruments in medicine. It is very likely that quality management improves effectiveness in the whole field of medicine, but this has yet to be proved. Georg Thieme Verlag KG Stuttgart · New York.

9 CFR 381.193 - Poultry carcasses, etc., not intended for human food.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Poultry carcasses, etc., not intended..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Transportation...

Formal Methods Case Studies for DO-333

NASA Technical Reports Server (NTRS)

Cofer, Darren; Miller, Steven P.

2014-01-01

RTCA DO-333, Formal Methods Supplement to DO-178C and DO-278A provides guidance for software developers wishing to use formal methods in the certification of airborne systems and air traffic management systems. The supplement identifies the modifications and additions to DO-178C and DO-278A objectives, activities, and software life cycle data that should be addressed when formal methods are used as part of the software development process. This report presents three case studies describing the use of different classes of formal methods to satisfy certification objectives for a common avionics example - a dual-channel Flight Guidance System. The three case studies illustrate the use of theorem proving, model checking, and abstract interpretation. The material presented is not intended to represent a complete certification effort. Rather, the purpose is to illustrate how formal methods can be used in a realistic avionics software development project, with a focus on the evidence produced that could be used to satisfy the verification objectives found in Section 6 of DO-178C.

7 CFR 301.86-5 - Issuance and cancellation of certificates and limited permits.

Code of Federal Regulations, 2011 CFR

2011-01-01

... plant. (3) Certification requirements for potatoes for consumption, root crops for consumption, garden... for consumption, root crops intended for consumption, garden or dry beans, or peas from the quarantined area only if the field in which the potatoes, root crops, garden or dry beans, or peas were grown...

7 CFR 301.86-5 - Issuance and cancellation of certificates and limited permits.

Code of Federal Regulations, 2014 CFR

2014-01-01

... plant. (3) Certification requirements for potatoes for consumption, root crops for consumption, garden... for consumption, root crops intended for consumption, garden or dry beans, or peas from the quarantined area only if the field in which the potatoes, root crops, garden or dry beans, or peas were grown...

7 CFR 301.86-5 - Issuance and cancellation of certificates and limited permits.

Code of Federal Regulations, 2012 CFR

2012-01-01

... plant. (3) Certification requirements for potatoes for consumption, root crops for consumption, garden... for consumption, root crops intended for consumption, garden or dry beans, or peas from the quarantined area only if the field in which the potatoes, root crops, garden or dry beans, or peas were grown...

15 CFR 325.6 - Publishing notices in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Publishing notices in the Federal... CERTIFICATES OF REVIEW § 325.6 Publishing notices in the Federal Register. (a) Within ten days after an... conduct for which certification is sought. If the Secretary does not intend to publish the summary...

7 CFR 301.86-5 - Issuance and cancellation of certificates and limited permits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... nursery stock—(i) Potatoes. Potatoes intended for use as nursery stock (i.e., seed potatoes) are prohibited from being moved interstate from the quarantined area. (ii) Nursery stock of other host crops. An inspector may issue a certificate for the interstate movement of nursery stock of pale cyst nematode host...

20 CFR 656.15 - Applications for labor certification for Schedule A occupations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Schedule A labor certification for an alien to be employed as a physical therapist (§ 656.5(a)(1)) must... state physical therapy licensing official in the state of intended employment, stating the alien is qualified to take that state's written licensing examination for physical therapists. Application for...

20 CFR 656.15 - Applications for labor certification for Schedule A occupations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Schedule A labor certification for an alien to be employed as a physical therapist (§ 656.5(a)(1)) must... state physical therapy licensing official in the state of intended employment, stating the alien is qualified to take that state's written licensing examination for physical therapists. Application for...

20 CFR 656.15 - Applications for labor certification for Schedule A occupations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Schedule A labor certification for an alien to be employed as a physical therapist (§ 656.5(a)(1)) must... state physical therapy licensing official in the state of intended employment, stating the alien is qualified to take that state's written licensing examination for physical therapists. Application for...

75 FR 81648 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

...: Certification of Knowledge of State Laws, Submission of Water Pollution Act. The Department of Justice (DOJ... of State Laws, Submission of Water Pollution Act. (3) Agency form number, if any, and the applicable... which he intends to do business and submit the certificate required by section 21 of the Federal Water...

Block 2 SRM conceptual design studies. Volume 1, Book 2: Preliminary development and verification plan

NASA Technical Reports Server (NTRS)

1986-01-01

Activities that will be conducted in support of the development and verification of the Block 2 Solid Rocket Motor (SRM) are described. Development includes design, fabrication, processing, and testing activities in which the results are fed back into the project. Verification includes analytical and test activities which demonstrate SRM component/subassembly/assembly capability to perform its intended function. The management organization responsible for formulating and implementing the verification program is introduced. It also identifies the controls which will monitor and track the verification program. Integral with the design and certification of the SRM are other pieces of equipment used in transportation, handling, and testing which influence the reliability and maintainability of the SRM configuration. The certification of this equipment is also discussed.

40 CFR 80.40 - Fuel certification procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... volume percent ethanol, or RBOB intended for blending with 10 volume percent ethanol, that is intended... contain denatured, anhydrous ethanol. The concentration of the ethanol, excluding the required denaturing agent, must be at least 9% and no more than 10% (by volume) of the gasoline. The ethanol content of the...

40 CFR 80.40 - Fuel certification procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... volume percent ethanol, or RBOB intended for blending with 10 volume percent ethanol, that is intended... contain denatured, anhydrous ethanol. The concentration of the ethanol, excluding the required denaturing agent, must be at least 9% and no more than 10% (by volume) of the gasoline. The ethanol content of the...

Towards Certification of a Space System Application of Fault Detection and Isolation

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Markosian, Lawrence Z.

2008-01-01

Advanced fault detection, isolation and recovery (FDIR) software is being investigated at NASA as a means to the improve reliability and availability of its space systems. Certification is a critical step in the acceptance of such software. Its attainment hinges on performing the necessary verification and validation to show that the software will fulfill its requirements in the intended setting. Presented herein is our ongoing work to plan for the certification of a pilot application of advanced FDIR software in a NASA setting. We describe the application, and the key challenges and opportunities it offers for certification.

20 CFR 655.10 - Determination of prevailing wage for temporary labor certification purposes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... shall be determined as follows: (1) Except as provided in paragraph (e) of this section, if the job... purposes. (2) If the job opportunity is not covered by a CBA, the prevailing wage for labor certification.... (3) If the job opportunity involves multiple worksites within an area of intended employment and...

A Study To Determine Acceptable Curriculum Guidelines for Earning an ESE Culinary Arts Certificate.

ERIC Educational Resources Information Center

Donnarumma, Leopold J.

This practicum involved designing a special program for a target group of 19 high school Exceptional Student Education students enrolled in a culinary arts vocational program to build and maintain basic culinary arts skills. The program, intended to enable them to qualify for the Florida culinary arts completion certificate, was designed by the…

[Practical implementation of a quality management system in a radiological department].

PubMed

Huber, S; Zech, C J

2011-10-01

This article describes the architecture of a project aiming to implement a DIN EN ISO 9001 quality management system in a radiological department. It is intended to be a practical guide to demonstrate each step of the project leading to certification of the system. In a planning phase resources for the implementation of the project have to be identified and a quality management (QM) group as core team has to be formed. In the first project phase all available documents have to be checked and compiled in the QM manual. Moreover all relevant processes of the department have to be described in so-called process descriptions. In a second step responsibilities for the project are identified. Customer and employee surveys have to be carried out and a nonconformity management system has to be implemented. In this phase internal audits are also needed to check the new QM system, which is finally tested in the external certification audit with reference to its conformity with the standards.

Getting Started on Assessment: Developing a Voluntary System of Assessment and Certification Based on Skill Standards.

ERIC Educational Resources Information Center

National Skill Standards Board (DOL/ETA), Washington, DC.

This manual provides practical advice for voluntary partnerships that, since 1994, are part of the effort to build a voluntary national system of skill standards, assessment, and certification. Intended to be used with guidance from the National Skill Standards Board, it is designed for the voluntary partnerships that have completed the standards…

21 CFR 73.2150 - Dihydroxyacetone.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2150 Dihydroxyacetone. (a) Identity and specifications... amounts consistent with good manufacturing practice in externally applied cosmetics intended solely or in...

21 CFR 73.2150 - Dihydroxyacetone.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2150 Dihydroxyacetone. (a) Identity and specifications... amounts consistent with good manufacturing practice in externally applied cosmetics intended solely or in...

21 CFR 73.2150 - Dihydroxyacetone.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2150 Dihydroxyacetone. (a) Identity and specifications... amounts consistent with good manufacturing practice in externally applied cosmetics intended solely or in...

Examination of Sign Language Education According to the Opinions of Members from a Basic Sign Language Certification Program

ERIC Educational Resources Information Center

Akmese, Pelin Pistav

2016-01-01

Being hearing impaired limits one's ability to communicate in that it affects all areas of development, particularly speech. One of the methods the hearing impaired use to communicate is sign language. This study, a descriptive study, intends to examine the opinions of individuals who had enrolled in a sign language certification program by using…

41 CFR 60-3.2 - Scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... organization), referral, retention, and licensing and certification, to the extent that licensing and... abilities to perform the job. Nothing in these guidelines is intended or should be interpreted as...

21 CFR 73.2030 - Annatto.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2030 Annatto. (a) Identity and specification. The color... coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2645 - Aluminum powder.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2645 Aluminum powder. (a) Identity and specifications... externally applied cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2030 - Annatto.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2030 Annatto. (a) Identity and specification. The color... coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2030 - Annatto.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2030 Annatto. (a) Identity and specification. The color... coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2645 - Aluminum powder.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2645 Aluminum powder. (a) Identity and specifications... externally applied cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2645 - Aluminum powder.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2645 Aluminum powder. (a) Identity and specifications... externally applied cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2575 - Titanium dioxide.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2575 Titanium dioxide. (a) Identity and specifications... safely used in cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2575 - Titanium dioxide.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2575 Titanium dioxide. (a) Identity and specifications... safely used in cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2575 - Titanium dioxide.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2575 Titanium dioxide. (a) Identity and specifications... safely used in cosmetics, including cosmetics intended for use in the area of the eye, in amounts...

21 CFR 73.2327 - Chromium oxide greens.

Code of Federal Regulations, 2014 CFR

2014-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2327 Chromium oxide greens. (a) Identity and... may be safely used in externally applied cosmetics, including cosmetics intended for use in the area...

21 CFR 73.2095 - β-Carotene.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2095 β-Carotene. (a) Identity and specifications. The... cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with...

21 CFR 73.2327 - Chromium oxide greens.

Code of Federal Regulations, 2012 CFR

2012-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2327 Chromium oxide greens. (a) Identity and... may be safely used in externally applied cosmetics, including cosmetics intended for use in the area...

21 CFR 73.2327 - Chromium oxide greens.

Code of Federal Regulations, 2013 CFR

2013-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2327 Chromium oxide greens. (a) Identity and... may be safely used in externally applied cosmetics, including cosmetics intended for use in the area...

21 CFR 73.2095 - β-Carotene.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2095 β-Carotene. (a) Identity and specifications. The... cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with...

21 CFR 73.2095 - β-Carotene.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2095 β-Carotene. (a) Identity and specifications. The... cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with...

21 CFR 73.2326 - Chromium hydroxide green.

Code of Federal Regulations, 2013 CFR

2013-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2326 Chromium hydroxide green. (a) Identity and... in coloring externally applied cosmetics, including those intended for use in the area of the eye, in...

21 CFR 73.2326 - Chromium hydroxide green.

Code of Federal Regulations, 2014 CFR

2014-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2326 Chromium hydroxide green. (a) Identity and... in coloring externally applied cosmetics, including those intended for use in the area of the eye, in...

21 CFR 73.2326 - Chromium hydroxide green.

Code of Federal Regulations, 2012 CFR

2012-04-01

... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2326 Chromium hydroxide green. (a) Identity and... in coloring externally applied cosmetics, including those intended for use in the area of the eye, in...

Engine Certification and Compliance Testing

EPA Pesticide Factsheets

The National Vehicle and Fuel Emissions Laboratory (NVFEL) tests a portion of all heavy-duty diesel and small gasoline engines intended for sale in the United States to confirm compliance with EPA’s exhaust emissions standards.

46 CFR 122.910 - Suspension and revocation.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., certificate or registry, or merchant mariner's document who commits an act of misconduct, negligence, or incompetence, or who violates or fails to comply with this subchapter or any other law or regulation intending...

Expertise sensitive item selection.

PubMed

Chow, P; Russell, H; Traub, R E

2000-12-01

In this paper we describe and illustrate a procedure for selecting items from a large pool for a certification test. The proposed procedure, which is intended to improve the alignment of the certification test with on-the-job performance, is based on an expertise sensitive index. This index for an item is the difference between the item's p values for experts and novices. An example is provided of the application of the index for selecting items to be used in certifying bakers.

Nurse leader certification preparation: how are confidence levels impacted?

PubMed

Junger, Stacey; Trinkle, Nicole; Hall, Norma

2016-09-01

The aim was to examine the effect of a nurse leader certification preparation course on the confidence levels of the participants. Limited literature is available regarding nurse leader development and certifications. Barriers exist related to lack of confidence, high cost, time and lack of access to a preparation course. Nurse leaders (n = 51) completed a pre- and post-survey addressing confidence levels of participants related to the topics addressed in the nurse leader certification preparation course. There were statistically significant increases in confidence levels related to all course content for the participants. At the time of the study, there were 31.4% of participants intending to sit for the certification examination, and 5 of the 51 participants successfully sat for and passed the examination. A nurse leader certification preparation course increases confidence levels of the participants and removes barriers, thereby increasing the number of certifications obtained. The health-care climate is increasingly complex and nurse leaders need the expertise to navigate the ever-changing health-care environment. Certification in a specialty, such as leadership, serves as an indicator of a high level of competence in the field. © 2016 John Wiley & Sons Ltd.

CRP for Pesticides - Child Resistant Packaging Consultants

EPA Pesticide Factsheets

This list includes consultants who have indicated an expertise in the area of child-resistant packaging. This list is not intended to indicate EPA approval, certification, or endorsement of these consultants, nor is it necessarily comprehensive.

Application for certification 1988 model year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings that describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems.

Development, testing, and certification of Owens-Illinois model SEC-601 solar energy collector system

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

The final results are presented of the additional development work on the existing air-cooled solar energy collector subsystem for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the deliverable end items, lists program objectives, relates how they were accomplished, deals with problems encountered during fabrication and testing, and includes a certification statement of performance. The report shows that the products developed are marketable and suitable for public use.

Development, testing, and certification of the Northrup, Inc., ML series concentrating solar collector model NSC-01-0732

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

A summary is presented of the additional development work on the existing ML Series concentrating solar collector for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the development hardware, lists deliverable end items, deals with problems encountered during fabrication and testing, and includes certification statements of performance. This report shows that the products developed are marketable and suitable for public use.

CRP for Pesticides - Testing Firms

EPA Pesticide Factsheets

This list includes firms that have conducted tests or have indicated an interest in conducting tests on child-resistant packaging. This list is not intended to indicate EPA approval, certification, or endorsement of these firms, nor is it comprehensive..

32 CFR 205.4 - Background and policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) MISCELLANEOUS END USE CERTIFICATES (EUCs) § 205.4 Background and policy. This part is intended to authorize the... for the U.S. Government in any part of the world, or (ii) To provide the item to allies engaged...

32 CFR 205.4 - Background and policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) MISCELLANEOUS END USE CERTIFICATES (EUCs) § 205.4 Background and policy. This part is intended to authorize the... for the U.S. Government in any part of the world, or (ii) To provide the item to allies engaged...

32 CFR 205.4 - Background and policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) MISCELLANEOUS END USE CERTIFICATES (EUCs) § 205.4 Background and policy. This part is intended to authorize the... for the U.S. Government in any part of the world, or (ii) To provide the item to allies engaged...

Eligibility, Quality, and Identification of Aeronautical Replacement Parts

DOT National Transportation Integrated Search

1996-05-24

This advisory circular (AC) provides information and guidance for use in determining the quality, eligibility and traceability of aeronautical parts and materials intended for installation on U.S. type-certificated products and to enable compliance w...

Development of a Procedure to Increase Awareness and Reporting of Counterintelligence and Terrorism Indicators: Personal Acknowledgment of Staff Security (PASS)

DTIC Science & Technology

2013-02-27

signed certification by supervisors that they understand and intend to comply with reporting policy. Recent psychological research suggests that the...intend to comply with reporting policy. Recent psychological research suggests that the additional step of requiring a signed acknowledgment may make...prepared by the Defense Personnel Security Research Center (PERSEREC) as part of an effort to design and pilot test the proposed system. This report was

[Medical innovations in the area of conflict between certification and allowance].

PubMed

Möller, B; Stockheim, M; Kraus, T; Weber, A

2010-10-01

The medical technology industry is one of the most innovative industries in Germany. Once a medical product is developed, it will be certificated according to European harmonized guidelines and norms. The respective national regulations in Germany are stipulated in the Medical Devices Act (MPG). Part of the certification process is a clinical assessment with the aim to prove that the medical device complies with the so-called essential requirements concerning safety, performance and suitability for the intended use as defined by the manufacturer. A clinical trial may be necessary to establish compliance with these requirements. During this clinical trial the devices are being assessed in patients according to strict requirements by law. The main criticism by the funding agencies is that these trials do not sufficiently apply methods of evidence-based medicine. Thereby they are not useful for assessing the medical benefit of the devices. The manufacturers' counter-argument is that the products are bearing the CE mark, that they comply with the uniform European standards and that their quality therefore has been appropriately assessed. This discussion relates to the question about payment for the products, as according to the Fifth Social Act the funding agencies are only permitted to finance products with a scientifically proven medical benefit. The present article discusses both positions in the context of national and international legislation for the certification of medical devices and presents possible solutions. © Georg Thieme Verlag KG Stuttgart · New York.

ULA's Atlas V for Boeing's Orbital Flight Test

NASA Image and Video Library

2017-10-24

The Atlas V rocket that will launch Boeing’s CST-100 Starliner spacecraft on the company’s uncrewed Orbital Flight Test for NASA’s Commercial Crew Program is coming together inside a United Launch Alliance facility in Decatur, Alabama. The flight test is intended to prove the design of the integrated space system prior to the Crew Flight Test. These events are part of NASA’s required certification process as the company works to regularly fly astronauts to and from the International Space Station. Boeing's Starliner will launch on the United Launch Alliance Atlas V rocket from Space Launch Complex 41 at Cape Canaveral Air Force Station in Florida.

Coroners and death certification law reform: the Coroners and Justice Act 2009 and its aftermath.

PubMed

Luce, Tom

2010-10-01

After considering various different options for half a decade, the last Government legislated in 2009 to reform the England and Wales coroner and death certification systems. The Coroners and Justice Act 2009 provides for the creation of a new Chief Coroner post to lead the jurisdiction and for local medical examiners to oversee a new death certification scheme applicable equally to burial and cremation cases. In October 2010 the new Government announced that it judges the main coroner reform to be unaffordable, will not proceed with it and plans to repeal the provisions. It intends to implement the new death certification arrangements, which is welcome. The decision to abort the main coroner reform in spite of longstanding and widespread recognition of the need for major change is deplorable though in line with other failures over the last century to properly modernise this neglected service.

Investigating weaknesses in Android certificate security

NASA Astrophysics Data System (ADS)

Krych, Daniel E.; Lange-Maney, Stephen; McDaniel, Patrick; Glodek, William

2015-05-01

Android's application market relies on secure certificate generation to establish trust between applications and their users; yet, cryptography is often not a priority for application developers and many fail to take the necessary security precautions. Indeed, there is cause for concern: several recent high-profile studies have observed a pervasive lack of entropy on Web-systems leading to the factorization of private keys.1 Sufficient entropy, or randomness, is essential to generate secure key pairs and combat predictable key generation. In this paper, we analyze the security of Android certificates. We investigate the entropy present in 550,000 Android application certificates using the Quasilinear GCD finding algorithm.1 Our results show that while the lack of entropy does not appear to be as ubiquitous in the mobile markets as on Web-systems, there is substantial reuse of certificates only one third of the certificates in our dataset were unique. In other words, we find that organizations frequently reuse certificates for different applications. While such a practice is acceptable under Google's specifications for a single developer, we find that in some cases the same certificates are used for a myriad of developers, potentially compromising Android's intended trust relationships. Further, we observed duplicate certificates being used by both malicious and non-malicious applications. The top 3 repeated certificates present in our dataset accounted for a total of 11,438 separate APKs. Of these applications, 451, or roughly 4%, were identified as malicious by antivirus services.

Careers "Fact Sheets" for clinical engineering & biomedical technology.

PubMed

Pacela, A F

1991-01-01

Three Careers "Fact Sheets" include information on CE and BMET job titles, job descriptions, and certification. These materials are intended to aid in furthering professional recognition for Clinical Engineers and BMETs, and may be useful in communicating with Administration or Human Resources departments.

Vehicle speed considerations in traffic management : development of a new speed monitoring program

DOT National Transportation Integrated Search

2000-12-01

The federal speed monitoring program, established in 1974 and repealed in 1995, was primarily intended to provide reliable data for inclusion in states' annual certification for Federal Aid Highway Projects. The repeal of the program not only authori...

16 CFR 4.1 - Appearances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... terminated within the past two years, a certification that the matter was not pending under the employee's... employee's Commission employment terminated within the past three years, either a declaration that... intends to participate; (ii) The participation would begin within two years after the termination of the...

78 FR 65161 - Airworthiness Directives; Agusta S.p.A. (Type Certificate Currently Held by AgustaWestland S.p.A...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... engine speeds during steady-state operations. These actions are intended to alert pilots to avoid certain... alert pilots to avoid certain engine speeds during steady-state operations, prevent failure of the third...

Research Participants' Understanding of and Reactions to Certificates of Confidentiality.

PubMed

Beskow, Laura M; Check, Devon K; Ammarell, Natalie

2014-01-01

Certificates of Confidentiality are intended to facilitate participation in critical public health research by protecting against forced disclosure of identifying data in legal proceedings, but little is known about the effect of Certificate descriptions in consent forms. To gain preliminary insights, we conducted qualitative interviews with 50 HIV-positive individuals in Durham, North Carolina to explore their subjective understanding of Certificate descriptions and whether their reactions differed based on receiving a standard versus simplified description. Most interviewees were neither reassured nor alarmed by Certificate information, and most said it would not influence their willingness to participate or provide truthful information. However, compared with those receiving the simplified description, more who read the standard description said it raised new concerns, that their likelihood of participating would be lower, and that they might be less forthcoming. Most interviewees said they found the Certificate description clear, but standard-group participants often found particular words and phrases confusing, while simplified-group participants more often questioned the information's substance. Valid informed consent requires comprehension and voluntariness. Our findings highlight the importance of developing consent descriptions of Certificates and other confidentiality protections that are simple and accurate. These qualitative results provide rich detail to inform a larger, quantitative study that would permit further rigorous comparisons.

Research Participants’ Understanding of and Reactions to Certificates of Confidentiality

PubMed Central

Check, Devon K.; Ammarell, Natalie

2013-01-01

Background Certificates of Confidentiality are intended to facilitate participation in critical public health research by protecting against forced disclosure of identifying data in legal proceedings, but little is known about the effect of Certificate descriptions in consent forms. Methods To gain preliminary insights, we conducted qualitative interviews with 50 HIV-positive individuals in Durham, North Carolina to explore their subjective understanding of Certificate descriptions and whether their reactions differed based on receiving a standard versus simplified description. Results Most interviewees were neither reassured nor alarmed by Certificate information, and most said it would not influence their willingness to participate or provide truthful information. However, compared with those receiving the simplified description, more who read the standard description said it raised new concerns, that their likelihood of participating would be lower, and that they might be less forthcoming. Most interviewees said they found the Certificate description clear, but standard-group participants often found particular words and phrases confusing, while simplified-group participants more often questioned the information’s substance. Conclusions Valid informed consent requires comprehension and voluntariness. Our findings highlight the importance of developing consent descriptions of Certificates and other confidentiality protections that are simple and accurate. These qualitative results provide rich detail to inform a larger, quantitative study that would permit further rigorous comparisons. PMID:24563806

The toxic effects of calories

USDA-ARS?s Scientific Manuscript database

This is a new chapter in the Graduate School textbook "Cassarett & Doull's Toxicology". It is intended as a teaching text for graduate students in toxicology departments and programs and for the examination for professional certification as a Diplomate of the American Board of Toxicology (D.A.B.T.)...

7 CFR 652.23 - Certification process for private-sector entities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Certification process for private-sector entities. 652... ASSISTANCE Certification § 652.23 Certification process for private-sector entities. (a) A private sector... individual basis as part of the private-sector entity's certification and ensures that the requirements set...

76 FR 54528 - Standard Operating Procedures (SOP) of the Aircraft Certification Service (AIR) Process for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

...) of the Aircraft Certification Service (AIR) Process for the Sequencing of Certification and... on the Aircraft Certification Service (AIR) standard operating procedure (SOP) describing the process... comments on the SOP : AIR-100-001; Standard Operating Procedure--Aircraft Certification Service Project...

National Board Certification: It's Time for Preschool Teachers!

ERIC Educational Resources Information Center

Gillentine, Jonathan

2010-01-01

National Board Certification is a voluntary process by which teachers of students ages 3 through 18 demonstrate accomplished teaching. This article describes the process and certification requirements for one certificate--the Early Childhood/Generalist (ECG), for teachers of children ages 3 through 8. The National Board Certification process was…

31 CFR 592.307 - Kimberley Process Certificate.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Kimberley Process Certificate. 592.307... Definitions § 592.307 Kimberley Process Certificate. The term Kimberley Process Certificate means a tamper... English translation is incorporated: (a) The title “Kimberley Process Certificate” and the statement: “The...

31 CFR 592.307 - Kimberley Process Certificate.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Kimberley Process Certificate. 592.307... Definitions § 592.307 Kimberley Process Certificate. The term Kimberley Process Certificate means a tamper... English translation is incorporated: (a) The title “Kimberley Process Certificate” and the statement: “The...

31 CFR 592.307 - Kimberley Process Certificate.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Kimberley Process Certificate. 592.307... Definitions § 592.307 Kimberley Process Certificate. The term Kimberley Process Certificate means a tamper... English translation is incorporated: (a) The title “Kimberley Process Certificate” and the statement: “The...

31 CFR 592.307 - Kimberley Process Certificate.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Kimberley Process Certificate. 592.307... Definitions § 592.307 Kimberley Process Certificate. The term Kimberley Process Certificate means a tamper... English translation is incorporated: (a) The title “Kimberley Process Certificate” and the statement: “The...

9 CFR 381.400 - Nutrition labeling of poultry products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Nutrition labeling of poultry products... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.400 Nutrition labeling of poultry products. (a) Nutrition labeling shall be provided for all poultry products intended...

Pesticide Application and Safety Training. Sale Publication 4070.

ERIC Educational Resources Information Center

Stimmann, M. W.

This guide is intended for use by those preparing to take the California certification examination for commercial pesticide applicators. The first chapter gives brief descriptions and illustrations of types of insect, vertebrate, plant, and microorganism pests. The other chapters cover pesticide classifications and formulations, labels and…

21 CFR 73.2991 - Zinc oxide.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2991 Zinc oxide. (a) Identity and specifications. The... (a)(1) and (b). (b) Uses and restrictions. Zinc oxide may be safely used in cosmetics, including cosmetics intended for use in the area of the eye, in amounts consistent with good manufacturing practice...

Using Frankencerts for Automated Adversarial Testing of Certificate Validation in SSL/TLS Implementations.

PubMed

Brubaker, Chad; Jana, Suman; Ray, Baishakhi; Khurshid, Sarfraz; Shmatikov, Vitaly

2014-01-01

Modern network security rests on the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols. Distributed systems, mobile and desktop applications, embedded devices, and all of secure Web rely on SSL/TLS for protection against network attacks. This protection critically depends on whether SSL/TLS clients correctly validate X.509 certificates presented by servers during the SSL/TLS handshake protocol. We design, implement, and apply the first methodology for large-scale testing of certificate validation logic in SSL/TLS implementations. Our first ingredient is "frankencerts," synthetic certificates that are randomly mutated from parts of real certificates and thus include unusual combinations of extensions and constraints. Our second ingredient is differential testing: if one SSL/TLS implementation accepts a certificate while another rejects the same certificate, we use the discrepancy as an oracle for finding flaws in individual implementations. Differential testing with frankencerts uncovered 208 discrepancies between popular SSL/TLS implementations such as OpenSSL, NSS, CyaSSL, GnuTLS, PolarSSL, MatrixSSL, etc. Many of them are caused by serious security vulnerabilities. For example, any server with a valid X.509 version 1 certificate can act as a rogue certificate authority and issue fake certificates for any domain, enabling man-in-the-middle attacks against MatrixSSL and GnuTLS. Several implementations also accept certificate authorities created by unauthorized issuers, as well as certificates not intended for server authentication. We also found serious vulnerabilities in how users are warned about certificate validation errors. When presented with an expired, self-signed certificate, NSS, Safari, and Chrome (on Linux) report that the certificate has expired-a low-risk, often ignored error-but not that the connection is insecure against a man-in-the-middle attack. These results demonstrate that automated adversarial testing with frankencerts is a powerful methodology for discovering security flaws in SSL/TLS implementations.

Using Frankencerts for Automated Adversarial Testing of Certificate Validation in SSL/TLS Implementations

PubMed Central

Brubaker, Chad; Jana, Suman; Ray, Baishakhi; Khurshid, Sarfraz; Shmatikov, Vitaly

2014-01-01

Modern network security rests on the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols. Distributed systems, mobile and desktop applications, embedded devices, and all of secure Web rely on SSL/TLS for protection against network attacks. This protection critically depends on whether SSL/TLS clients correctly validate X.509 certificates presented by servers during the SSL/TLS handshake protocol. We design, implement, and apply the first methodology for large-scale testing of certificate validation logic in SSL/TLS implementations. Our first ingredient is “frankencerts,” synthetic certificates that are randomly mutated from parts of real certificates and thus include unusual combinations of extensions and constraints. Our second ingredient is differential testing: if one SSL/TLS implementation accepts a certificate while another rejects the same certificate, we use the discrepancy as an oracle for finding flaws in individual implementations. Differential testing with frankencerts uncovered 208 discrepancies between popular SSL/TLS implementations such as OpenSSL, NSS, CyaSSL, GnuTLS, PolarSSL, MatrixSSL, etc. Many of them are caused by serious security vulnerabilities. For example, any server with a valid X.509 version 1 certificate can act as a rogue certificate authority and issue fake certificates for any domain, enabling man-in-the-middle attacks against MatrixSSL and GnuTLS. Several implementations also accept certificate authorities created by unauthorized issuers, as well as certificates not intended for server authentication. We also found serious vulnerabilities in how users are warned about certificate validation errors. When presented with an expired, self-signed certificate, NSS, Safari, and Chrome (on Linux) report that the certificate has expired—a low-risk, often ignored error—but not that the connection is insecure against a man-in-the-middle attack. These results demonstrate that automated adversarial testing with frankencerts is a powerful methodology for discovering security flaws in SSL/TLS implementations. PMID:25404868

Argument-Based Airworthiness Assurance of Small UAS

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh

2015-01-01

Presently, there are three avenues by which Unmanned Aircraft System (UAS) operations are authorized in the U.S. National Airspace System (NAS): obtaining either (i) a certificate of authorization (COA), or (ii) a special airworthiness certificate (SAC) in either the experimental, or the restricted category, or (iii) an exemption from an airworthiness certificate together with a civil COA. The first is meant primarily for public entities, such as NASA; the remaining two are the only available means for civil UAS operations. Recently, the Federal Aviation Administration (FAA) has also proposed a regulatory framework targeted for certain small UAS, specifically those weighing 55 pounds or less, although final rulemaking remains pending. We have previously shown how an assurance case can aggregate heterogeneous reasoning and safety evidence, with application to UAS safety. In this paper, we describe how assurance cases can serve as a common framework to justify overall system safety, unifying both operational aspects and airworthiness, in particular system design assurance. We also show how this approach can coexist with, and augment, existing safety analysis processes and best-practices, by transforming the artifacts they produce into structured assurance arguments. To illustrate the applicability and utility of our approach, we have been applying it for the design assurance of an unmanned rotorcraft system, intended for precision agriculture operations, as part of the NASA Unmanned Aircraft System (UAS) Integration in the National Airspace System (NAS) project.

Authentication Architecture for Region-Wide e-Health System with Smartcards and a PKI

NASA Astrophysics Data System (ADS)

Zúquete, André; Gomes, Helder; Cunha, João Paulo Silva

This paper describes the design and implementation of an e-Health authentication architecture using smartcards and a PKI. This architecture was developed to authenticate e-Health Professionals accessing the RTS (Rede Telemática da Saúde), a regional platform for sharing clinical data among a set of affiliated health institutions. The architecture had to accommodate specific RTS requirements, namely the security of Professionals' credentials, the mobility of Professionals, and the scalability to accommodate new health institutions. The adopted solution uses short-lived certificates and cross-certification agreements between RTS and e-Health institutions for authenticating Professionals accessing the RTS. These certificates carry as well the Professional's role at their home institution for role-based authorization. Trust agreements between e-Health institutions and RTS are necessary in order to make the certificates recognized by the RTS. As a proof of concept, a prototype was implemented with Windows technology. The presented authentication architecture is intended to be applied to other medical telematic systems.

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2014 CFR

2014-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2012 CFR

2012-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2013 CFR

2013-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

9 CFR 381.400 - Nutrition labeling of poultry products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Nutrition labeling of poultry products... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.400 Nutrition labeling of poultry products. (a) Nutrition labeling must be provided for all poultry products intended for...

9 CFR 381.400 - Nutrition labeling of poultry products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Nutrition labeling of poultry products... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.400 Nutrition labeling of poultry products. (a) Nutrition labeling must be provided for all poultry products intended for...

40 CFR 80.40 - Fuel certification procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... volume percent ethanol, or RBOB intended for blending with 10 to 15 volume percent ethanol, that is... contain denatured, anhydrous ethanol. The concentration of the ethanol, excluding the required denaturing agent, must be at least 9 percent and no more than 15 percent (by volume) of the gasoline. The ethanol...

40 CFR 80.40 - Fuel certification procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... volume percent ethanol, or RBOB intended for blending with 10 to 15 volume percent ethanol, that is... contain denatured, anhydrous ethanol. The concentration of the ethanol, excluding the required denaturing agent, must be at least 9 percent and no more than 15 percent (by volume) of the gasoline. The ethanol...

40 CFR 80.40 - Fuel certification procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... volume percent ethanol, or RBOB intended for blending with 10 to 15 volume percent ethanol, that is... contain denatured, anhydrous ethanol. The concentration of the ethanol, excluding the required denaturing agent, must be at least 9 percent and no more than 15 percent (by volume) of the gasoline. The ethanol...

Mississippi Curriculum Framework for Residential Carpentry Technology (Program CIP: 46.0201--Carpenter). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for certificate of residential carpentry and residential carpentry technology programs. Presented in the introductory section are program descriptions and suggested course sequences for both programs. Section I lists…

School Law for Kentucky Teachers and Administrators. Third Edition.

ERIC Educational Resources Information Center

Faber, Charles F.; And Others

Intended for use in school law courses of a primarily informative nature with some attention given to attitudinal concerns, this book was designed for teachers and educational administrators. The contents are divided into 13 units that contain information regarding education and the American legal system, certification and employment, religion and…

25 CFR 307.1 - Penalties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Penalties. 307.1 Section 307.1 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO ALL-WOOL WOVEN FABRICS; USE OF GOVERNMENT CERTIFICATE OF... products, Indian or otherwise, or to any labels, signs, prints, packages, wrappers, or receptacles intended...

9 CFR 317.24 - Packaging materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Packaging materials. 317.24 Section... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS General § 317.24 Packaging materials... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal...

50 CFR 222.205 - Import and export requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Import and export requirements. 222.205... Certificates of Exemption for Pre-Act Endangered Species Parts § 222.205 Import and export requirements. (a... intended for importation into or exportation from the United States, shall not be imported or exported...

40 CFR 91.1009 - Export exemptions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Export exemptions. 91.1009 Section 91....1009 Export exemptions. (a) A new marine SI engine intended solely for export, and so labeled or tagged...., Washington, DC 20460. New marine SI engines exported to such countries must comply with EPA certification...

Web-Based Certification Courses: The Future of Teacher Preparation in Special Education?

ERIC Educational Resources Information Center

Sun, Ling; Bender, William N.; Fore, Cecil, III

2003-01-01

This article describes development and implementation of the Western Carolina University Teacher Support Program, a multi-component Web-based special education teacher development course. The program is intended to reduce stress and burnout, improve retention, develop problem solving strategies, and improve the effectiveness of teachers.…

20 CFR 655.4 - Definitions of terms used in this subpart.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... worker recruitment report. Area of Intended Employment means the geographic area within normal commuting... certification is sought. There is no rigid measure of distance which constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual circumstances among different areas (e...

The information retrieval system of {open_quotes}heat abd nass transfer{close_quotes} software complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsitsin, A.G.

A project is discussed which is aimed at creating the International Center for certification of software complexes (SC), intended to for soling various heat and mass transfer problems. Information on the experience gained in the operation of an information retrieval SC system is presented.

9 CFR 156.3 - Kind of service; records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the products intended for certification. The inspector shall keep such records of the temperatures... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Kind of service; records. 156.3 Section 156.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF...

Program Standards for the Initial Preparation of Teachers of Social Studies.

ERIC Educational Resources Information Center

National Council for the Social Studies, Washington, DC.

These guidelines are derived from the National Council for the Social Studies (NCSS) document, "National Standards for Social Studies Teachers." The guidelines are intended to be used by institutions that prepare teachers to assess the quality of their teacher preparation programs for licensure (or certification) in comprehensive social…

12 CFR 708b.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Regional Director. The certification will include, at a minimum, the number of members who voted, the number of affirmative votes, and the number of negative votes. During the course of the voting period the..., and internet website posting. (3) Does not include communications intended to be read only by the...

12 CFR 708b.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Regional Director. The certification will include, at a minimum, the number of members who voted, the number of affirmative votes, and the number of negative votes. During the course of the voting period the..., and internet website posting. (3) Does not include communications intended to be read only by the...

12 CFR 708b.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Regional Director. The certification will include, at a minimum, the number of members who voted, the number of affirmative votes, and the number of negative votes. During the course of the voting period the..., and internet website posting. (3) Does not include communications intended to be read only by the...

21 CFR 73.2087 - Carmine.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2087 Carmine. (a) Identity and specifications. The color additive carmine shall conform in identity and specifications to the requirements of § 73.100 (a)(2) and (b... intended for use in the area of the eye, in amounts consistent with good manufacturing practices. (c...

40 CFR 600.311-12 - Determination of values for fuel economy labels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of available information from the certification database for all model types. Specifically, the mean... vehicle cannot be charged at the higher voltage. (l) California-specific values. If the Administrator... fuel economy or other label values from those intended for sale in other states, the Administrator will...

10 CFR 52.35 - Use of site for other purposes.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., Office of New Reactors or Director, Office of Nuclear Reactor Regulation, as appropriate, (Director) of... NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS... informs the Director that the holder no longer intends to use the site for a nuclear power plant, the...

10 CFR 52.35 - Use of site for other purposes.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., Office of New Reactors or Director, Office of Nuclear Reactor Regulation, as appropriate, (Director) of... NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS... informs the Director that the holder no longer intends to use the site for a nuclear power plant, the...

10 CFR 52.35 - Use of site for other purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., Office of New Reactors or Director, Office of Nuclear Reactor Regulation, as appropriate, (Director) of... NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS... informs the Director that the holder no longer intends to use the site for a nuclear power plant, the...

10 CFR 52.35 - Use of site for other purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., Office of New Reactors or Director, Office of Nuclear Reactor Regulation, as appropriate, (Director) of... NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS... informs the Director that the holder no longer intends to use the site for a nuclear power plant, the...

10 CFR 52.35 - Use of site for other purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., Office of New Reactors or Director, Office of Nuclear Reactor Regulation, as appropriate, (Director) of... NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS... informs the Director that the holder no longer intends to use the site for a nuclear power plant, the...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2647 - Copper powder.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2647 Copper powder. (a) Identity and specifications. The....1647 (a)(1) and (b). (b) Uses and restrictions. Copper powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2647 - Copper powder.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2647 Copper powder. (a) Identity and specifications. The....1647 (a)(1) and (b). (b) Uses and restrictions. Copper powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2647 - Copper powder.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2647 Copper powder. (a) Identity and specifications. The....1647 (a)(1) and (b). (b) Uses and restrictions. Copper powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

Application for certification 1980 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1990 model-year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1993 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1991 model-year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model-year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1981 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Certification of lightning protection for a full-authority digital engine control

NASA Technical Reports Server (NTRS)

Dargi, M.; Rupke, E.; Wiles, K.

1991-01-01

FADEC systems present many challenges to the lightning protection engineer. Verification of the protection-design adequacy for certification purposes presents additional challenges. The basic requirements of the certification plan of a FADEC is to demonstrate compliance with Federal Airworthiness Regulations (FAR) 25.1309 and 25.581. These FARs are intended for transport aircraft, but there are equivalent sections for general aviation aircraft, normal and transport rotorcraft. Military aircraft may have additional requirements. The criteria for demonstration of adequate lightning protection for a FADEC systems include the procedures outlined in FAA Advisory Circular (AC) 20-136, Protection of aircraft electrical/electronic systems against the indirect effects of lightning. As FADEC systems, including the interconnecting wiring, are generally not susceptible to direct attachment of lightning currents, the verification of protection against indirect effects is primarily described.

Application for certification 1987 model year light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. The engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. They also provide information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1981 model year light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

20 CFR 656.16 - Labor certification applications for sheepherders.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Labor certification applications for... LABOR LABOR CERTIFICATION PROCESS FOR PERMANENT EMPLOYMENT OF ALIENS IN THE UNITED STATES Labor Certification Process § 656.16 Labor certification applications for sheepherders. (a) Filing requirements and...

77 FR 53865 - Export Trade Certificate of Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... process based on exports of poultry products (``the TRQ System'') to support the operation and... the Board of Directors of COLOM-PEQ. 3. Open Tender Process. COLOM-PEQ shall offer TRQ Certificates... through an open tender process with certificates awarded to the highest bidders (``TRQ Certificates...

PKI Layer Cake: New Collision Attacks against the Global X.509 Infrastructure

NASA Astrophysics Data System (ADS)

Kaminsky, Dan; Patterson, Meredith L.; Sassaman, Len

Research unveiled in December of 2008 [15] showed how MD5's long-known flaws could be actively exploited to attack the real-worldCertification Authority infrastructure. In this paper, we demonstrate two new classes of collision, which will be somewhat trickier to address than previous attacks against X.509: the applicability of MD2 preimage attacks against the primary root certificate for Verisign, and the difficulty of validating X.509 Names contained within PKCS#10 Certificate Requests.We also draw particular attention to two possibly unrecognized vectors for implementation flaws that have been problematic in the past: the ASN.1 BER decoder required to parsePKCS#10, and the potential for SQL injection fromtext contained within its requests. Finally, we explore why the implications of these attacks are broader than some have realized - first, because Client Authentication is sometimes tied to X.509, and second, because Extended Validation certificates were only intended to stop phishing attacks from names similar to trusted brands. As per the work of Adam Barth and Collin Jackson [4], EV does not prevent an attacker who can synthesize or acquire a "low assurance" certificate for a given name from acquiring the "green bar" EV experience.

Overview of a pharmacist anticoagulation certificate program.

PubMed

Kirk, Julienne K; Edwards, Rebecca; Brewer, Andrew; Miller, Cathey; Bray, Bryan; Groce, James B

2017-07-01

To describe the design of an ongoing anticoagulation certificate program and annual renewal update for pharmacists. Components of the anticoagulation certificate program include home study, pre- and posttest, live sessions, case discussions with evaluation and presentation, an implementation plan, and survey information (program evaluation and use in practice). Clinical reasoning skills were assessed through case work-up and evaluation prior to live presentation. An annual renewal program requires pharmacists to complete home study and case evaluations. A total of 361 pharmacists completed the anticoagulation certificate program between 2002 and 2015. Most (62%) practiced in ambulatory care and 38% in inpatient care settings (8% in both). In the past four years, 71% were working in or starting anticoagulation clinics in ambulatory and inpatient settings. In their evaluations of the program, an average of 90% of participants agreed or strongly agreed the lecture material was relevant and objectives were met. Pharmacists are able to apply knowledge and skills in management of anticoagulation. This structured practice-based continuing education program was intended to enhance pharmacy practice and has achieved that goal. The certificate program in anticoagulation was relevant to pharmacists who attended the program. Copyright © 2017. Published by Elsevier Inc.

31 CFR 592.301 - Controlled through the Kimberley Process Certification Scheme.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Process Certification Scheme. 592.301 Section 592.301 Money and Finance: Treasury Regulations Relating to... Certification Scheme. (a) Except as otherwise provided in paragraph (b) of this section, the term controlled through the Kimberley Process Certification Scheme refers to the following requirements that apply, as...

31 CFR 592.301 - Controlled through the Kimberley Process Certification Scheme.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Process Certification Scheme. 592.301 Section 592.301 Money and Finance: Treasury Regulations Relating to... Certification Scheme. (a) Except as otherwise provided in paragraph (b) of this section, the term controlled through the Kimberley Process Certification Scheme refers to the following requirements that apply, as...

31 CFR 592.301 - Controlled through the Kimberley Process Certification Scheme.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Process Certification Scheme. 592.301 Section 592.301 Money and Finance: Treasury Regulations Relating to... Certification Scheme. (a) Except as otherwise provided in paragraph (b) of this section, the term controlled through the Kimberley Process Certification Scheme refers to the following requirements that apply, as...

31 CFR 592.301 - Controlled through the Kimberley Process Certification Scheme.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Process Certification Scheme. 592.301 Section 592.301 Money and Finance: Treasury Regulations Relating to... Certification Scheme. (a) Except as otherwise provided in paragraph (b) of this section, the term controlled through the Kimberley Process Certification Scheme refers to the following requirements that apply, as...

31 CFR 592.301 - Controlled through the Kimberley Process Certification Scheme.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Process Certification Scheme. 592.301 Section 592.301 Money and Finance: Treasury Regulations Relating to... Certification Scheme. (a) Except as otherwise provided in paragraph (b) of this section, the term controlled through the Kimberley Process Certification Scheme refers to the following requirements that apply, as...

49 CFR 1002.1 - Fees for records search, review, copying, certification, and related services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... scholarly research. The term “noncommercial scientific institution” refers to an institution that is not... research the results of which are not intended to promote any particular product or industry. They must... research. (3) Requesters who are representatives of the news media (persons actively gathering news for an...

49 CFR 1002.1 - Fees for records search, review, copying, certification, and related services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... scholarly research. The term “noncommercial scientific institution” refers to an institution that is not... research the results of which are not intended to promote any particular product or industry. They must... research. (3) Requesters who are representatives of the news media (persons actively gathering news for an...

21 CFR 74.1706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2010 CFR

2010-04-01

... manufacturing practice. (c) Labeling requirements. (1) The label of the color additive and any mixtures intended... COLOR ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1706 FD&C Yellow No. 6. (a) Identity and specifications. (1) The color additive FD&C Yellow No. 6 shall conform in identity and specifications to the...

General Machinist. Apprenticeship Training Standards = Machiniste. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for general machinists are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

Mould Maker. Apprenticeship Training Standards = Confection de moules. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for mold makers are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

7 CFR 3300.37 - Testing of a mechanical refrigerating appliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF... appliance is intended, with classes being defined as in ATP, Annex 1, paragraph 3. (c) A report of each test shall be completed on a form corresponding to the pertinent test report model prescribed in ATP, Annex 1...

7 CFR 3300.37 - Testing of a mechanical refrigerating appliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF... appliance is intended, with classes being defined as in ATP, Annex 1, paragraph 3. (c) A report of each test shall be completed on a form corresponding to the pertinent test report model prescribed in ATP, Annex 1...

7 CFR 3300.37 - Testing of a mechanical refrigerating appliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF... appliance is intended, with classes being defined as in ATP, Annex 1, paragraph 3. (c) A report of each test shall be completed on a form corresponding to the pertinent test report model prescribed in ATP, Annex 1...

7 CFR 3300.37 - Testing of a mechanical refrigerating appliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF... appliance is intended, with classes being defined as in ATP, Annex 1, paragraph 3. (c) A report of each test shall be completed on a form corresponding to the pertinent test report model prescribed in ATP, Annex 1...

Enhancing GCE A-Level Programmes.

ERIC Educational Resources Information Center

Holding, Gordon

This document, which is based on the findings of a study of 10 further education (FE) colleges throughout the United Kingdom, is intended to help FE colleges review and enhance their curriculum for 16- to 19-year-old students in General Certificate of Education (GCE) A-level (Advanced Level) courses. Discussed first are the following reasons for…

Native Residential Construction Worker. Apprenticeship Training Standards = Construction residentielle autochtone. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for native residential construction workers are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related…

Entry to Vocations: Building the Foundations for Successful Transitions. Research Report

ERIC Educational Resources Information Center

Clarke, Kira

2014-01-01

Vocational education and training (VET) in Schools is intended to provide young people with an opportunity to develop skills for a range of vocational occupations as they complete their senior secondary certificates. This report draws together findings from all three years of the "Entry to Vocations" research project and presents a set…

Exploring Mobile Affordances in the Digital Classroom

ERIC Educational Resources Information Center

Parsons, David; Thomas, Herbert; Wishart, Jocelyn

2016-01-01

This article reports on a survey of teachers undertaking a postgraduate applied practice certificate in digital and collaborative learning. The survey was intended to capture how mobile learning was currently being used by the teachers both on the course and in their own classrooms. The objective was to investigate to what extent mobile learning…

The Hemingway Project: A Collaborative School-based Program for Teacher Certification.

ERIC Educational Resources Information Center

Butler, Shannon K.; And Others

At Weber State University (Utah), teacher educators have collaborated with English faculty to design a pilot program (Hemingway Project) which serves as an initial effort to restructure the teacher education program. The program, funded by the Hemingway Foundation, is intended to provide greater integration of the university experience with actual…

Occupational Competency Profile for Health Occupations Education Program: Health Agency Assessment. Information Series: Report No. 10.

ERIC Educational Resources Information Center

Walters, Norma J.

This assessment instrument is intended to provide health occupations teachers and state departments of education with information needed to revise and improve the curriculum used in training prospective health occupations teachers and in updating certification requirements for practicing health care professionals. The profile lists the…

Motorcycle Mechanic. Apprenticeship Training Standards = Mecanicien de motocyclette. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for motorcycle mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

76 FR 70661 - Medical Certification Requirements as Part of the Commercial Driver's License (CDL); Extension of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... omission creates uncertainty and ambiguity regarding the intended scope and meaning of these requirements... carriers, this kind of uncertainty and ambiguity may be susceptible to exploitation by alleged offenders or... litigation, eliminate ambiguity, and reduce burden. Executive Order 13045 (Protection of Children) The FMCSA...

Family Structure & Social Change: A Preparation for Further Study Course.

ERIC Educational Resources Information Center

Donovan, Cathy

This instructional unit, which is intended for Australians working toward a Certificate in General Education for Adults, contains activities to help learners develop the skills and knowledge to read and write complex texts while examining human relationships and the family. Aimed at both native and nonnative English speakers, the unit contains…

75 FR 41276 - US Rail Partners, Ltd. and Blackwell Northern Gateway Railroad Company-Continuance in Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35384] US Rail Partners...). Applicants state that EBGR intends to file a notice for a modified certificate of public convenience and... the Colebrookdale Line, from Berks County, Pa. USRP currently controls through stock ownership two...

Nurse Assistant Instructor Guide.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational, Technical, and Adult Education.

This document is designed to assist the teacher in a nurse assistant certification program. The program is intended to prepare students for entry-level employment in a long-term care facility or with a licensed home health care agency. The 135-hour course teaches basic skills in patient care that will qualify the student to assist the licensed…

21 CFR 74.1706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2014 CFR

2014-04-01

... manufacturing practice. (c) Labeling requirements. (1) The label of the color additive and any mixtures intended... COLOR ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1706 FD&C Yellow No. 6. (a) Identity and specifications. (1) The color additive FD&C Yellow No. 6 shall conform in identity and specifications to the...

21 CFR 74.1706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2012 CFR

2012-04-01

... manufacturing practice. (c) Labeling requirements. (1) The label of the color additive and any mixtures intended... COLOR ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1706 FD&C Yellow No. 6. (a) Identity and specifications. (1) The color additive FD&C Yellow No. 6 shall conform in identity and specifications to the...

21 CFR 74.1706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2013 CFR

2013-04-01

... manufacturing practice. (c) Labeling requirements. (1) The label of the color additive and any mixtures intended... COLOR ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1706 FD&C Yellow No. 6. (a) Identity and specifications. (1) The color additive FD&C Yellow No. 6 shall conform in identity and specifications to the...

21 CFR 1040.20 - Sunlamp products and ultraviolet lamps intended for use in sunlamp products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... applicable. (f) Test for determination of compliance. Tests on which certification pursuant to § 1010.2 is... a product to reduce exposure of the eyes to radiation emitted by the product. (7) Spectral... nanometer (W/(cm2/nm)). (8) Spectral transmittance means the spectral irradiance transmitted through...

21 CFR 1040.20 - Sunlamp products and ultraviolet lamps intended for use in sunlamp products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... applicable. (f) Test for determination of compliance. Tests on which certification pursuant to § 1010.2 is... a product to reduce exposure of the eyes to radiation emitted by the product. (7) Spectral... nanometer (W/(cm2/nm)). (8) Spectral transmittance means the spectral irradiance transmitted through...

21 CFR 1040.20 - Sunlamp products and ultraviolet lamps intended for use in sunlamp products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... applicable. (f) Test for determination of compliance. Tests on which certification pursuant to § 1010.2 is... a product to reduce exposure of the eyes to radiation emitted by the product. (7) Spectral... nanometer (W/(cm2/nm)). (8) Spectral transmittance means the spectral irradiance transmitted through...

Alluvial Diamond Resource Potential and Production Capacity Assessment of Ghana

USGS Publications Warehouse

Chirico, Peter G.; Malpeli, Katherine C.; Anum, Solomon; Phillips, Emily C.

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by both diamond-producing and diamond-importing countries. Over 70 countries were included as members at the end of 2007. To prevent trade in 'conflict' diamonds while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was to assess the alluvial diamond resource endowment and current production capacity of the alluvial diamond-mining sector in Ghana. A modified volume and grade methodology was used to estimate the remaining diamond reserves within the Birim and Bonsa diamond fields. The production capacity of the sector was estimated using a formulaic expression of the number of workers reported in the sector, their productivity, and the average grade of deposits mined. This study estimates that there are approximately 91,600,000 carats of alluvial diamonds remaining in both the Birim and Bonsa diamond fields: 89,000,000 carats in the Birim and 2,600,000 carats in the Bonsa. Production capacity is calculated to be 765,000 carats per year, based on the formula used and available data on the number of workers and worker productivity. Annual production is highly dependent on the international diamond market and prices, the numbers of seasonal workers actively mining in the sector, and environmental conditions, which influence seasonal farming.

Disclosure and Fit Capability of the Filtering Facepiece Respirator.

PubMed

Lofgren, Don J

2018-05-01

The filtering facepiece air-purifying respirator is annually purchased in the tens of millions and widely used for worker protection from harmful airborne particulates. The workplace consumers of this safety product, i.e., employers, workers, and safety and health professionals, have assurances of its effectiveness through the respirator certification and disclosure requirements of the National Institute for Occupational Safety and Health. However, the certification of a critical performance requirement has been missing for the approved filtering facepiece respirator since 1995: fit capability. Without this certification, consumers continue to be at risk of purchasing a respirator model that may fit a small percentage of the intended users. This commentary updates and expands an earlier one by this author, addresses the consequences of poorly fitting certified models on the market and lack of disclosure, and calls for further action by National Institute for Occupational Safety and Health to meet the needs and expectations of the consumer.

Application for certification, 1988 model year light-duty vehicles - Volkswagen, Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission-control systems. Information is also provided on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1986 model year light-duty vehicles - Volkswagen/Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1993 model-year light-duty trucks - Grumman Olson

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-01-01

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty trucks from Grumman Olson Company. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirementsmore » to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1992 model-year light-duty vehicles - Grumman Olson

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-01

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines that he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of themore » application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1990 model-year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1989 model year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Measuring the efficiency of control rods in the RBMK critical assembly using a model of RKI-1 reactimeter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhitarev, V. E., E-mail: vejitarev@yandex.ru; Lebedev, G. V.; Sergevnin, A. Yu.

2016-12-15

The efficiency of control rods of the RBMK critical assembly is measured in a series of experiments. The aim of measurements is to determine the characteristics of the model of an RKI-1 reactimeter. The RKI-1 reactimeter is intended for measuring the efficiency of control rods when, according to conditions of operation, the metrological certification of results of an experiment is required. Complications with the metrological certification of reactimeters arise owing to the fact that usually calculated corrections to the results of measurements are required. When the RKI-1 reactimeter is used, there is no need to introduce calculated corrections; the resultmore » of measurements is given with the indication of substantiated errors. In connection with this, the metrological certification of the results of measurements using the RKI-1 reactimeter is simplified.« less

Trading legitimacy: everyday corruption and its consequences for medical regulation in southern Vietnam.

PubMed

Lê, Gillian

2013-09-01

Government regulation of health professionals is believed to ensure the efficacy and expertise of practitioners for and on behalf of patients. Certification and licensing are two common means to do so, legalizing a physician to practice medicine. However, ethnography from Ho Chi Minh City (HCMC) suggests that in corrupt socioeconomic environments, certification and licensing can alternatively produce a trade in legitimacy. Drawing on participant observations during 15 months of fieldwork with 25 medical acupuncturists in private practice in HCMC, southern Vietnam, and their patients, I argue that everyday practices of corruption and the importance of personal networks meant that legality, efficacy, and expertise separated. Certificates and licenses did not unproblematically validate expertise and efficacy. Consequently, compliance and enforcement of regulations as solutions to inadequate medical care may not achieve the effects intended. © 2013 by the American Anthropological Association.

Certification renewal process of the American Board of Orthodontics.

PubMed

Castelein, Paul T; DeLeon, Eladio; Dugoni, Steven A; Chung, Chun-Hsi; Tadlock, Larry P; Barone, Nicholas D; Kulbersh, Valmy P; Sabott, David G; Kastrop, Marvin C

2015-05-01

The American Board of Orthodontics was established in 1929 and is the oldest specialty board in dentistry. Its goal is to protect the public by ensuring competency through the certification of eligible orthodontists. Originally, applicants for certification submitted a thesis, 5 case reports, and a set of casts with appliances. Once granted, the certification never expired. Requirements have changed over the years. In 1950, 15 cases were required, and then 10 in 1987. The Board has continued to refine and improve the certification process. In 1998, certification became time limited, and a renewal process was initiated. The Board continues to improve the recertification process. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Shaping the norms that regulate international commerce of embryos.

PubMed

Gard, Julie A; Stringfellow, David A

2014-01-01

As various embryo technologies in livestock were developed and evolved to a state of usefulness over the past 40 years, scientists with a specific interest in infectious diseases sought to determine the epidemiologic consequences of movement, especially international movement, of increasing numbers of embryos. Many of the foundational studies in this area were reported in Theriogenology, beginning in the 1970s and especially throughout the 1980s and 1990s. Unquestionably, Theriogenology has been a widely used venue for dissemination of basic information on this subject, which ultimately led to the development of the now universally accepted techniques for certification of embryo health. Today it is well-recognized that movement in commerce of embryos, especially in vivo-derived embryos, is a very low-risk method for exchange of animal germ plasm. This paper chronicles the evolution of strategies for health certification of embryos. An overview is provided of the calculated efforts of practitioners, scientists, and regulators to organize, forge necessary partnerships, stimulate needed research, provide purposeful analysis of the results, and, through these processes, guarantee the universal acceptance of efficient protocols for certifying the health of embryos intended for movement in international commerce. Copyright © 2014 Elsevier Inc. All rights reserved.

Fast and secure handover of intra-ASN IEEE802.16 network by proposed certificate based pre-authentication

NASA Astrophysics Data System (ADS)

Sridevi, B.; Supriya, T. S.; Rajaram, S.

2013-01-01

The current generation of wireless networks has been designed predominantly to support voice and more recently data traffic. WiMAX is currently one of the hottest technologies in wireless. The main motive of the mobile technologies is to provide seamless cost effective mobility. But this is affected by Authentication cost and handover delay since on each handoff the Mobile Station (MS) has to undergo all steps of authentication. Pre-Authentication is used to reduce the handover delay and increase the speed of the Intra-ASN Handover. Proposed Pre-Authentication method is intended to reduce the authentication delay by getting pre authenticated by central authority called Pre Authentication Authority (PAA). MS requests PAA for Pre Authentication Certificate (PAC) before performing handoff. PAA verifies the identity of MS and provides PAC to MS and also to the neighboring target Base Stations (tBSs). MS having time bound PAC can skip the authentication process when recognized by target BS during handoff. It also prevents the DOS (Denial Of Service) attack and Replay attack. It has no wastage of unnecessary key exchange of the resources. The proposed work is simulated by NS2 model and by MATLAB.

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Vegetable Pests.

ERIC Educational Resources Information Center

Cress, D.; And Others

This manual is intended to assist pesticide applicators in vegetable crops prepare for certification under the Michigan Pesticide Control Act of 1976. The primary focus of this publication is on vegetable pest control. The three sections presented describe: (1) Insect pests of vegetable crops; (2) Weed pests of vegetable crops; and (3) Causes of…

Tool and Die Maker. Apprenticeship Training Standards = Outillage-ajustage. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for tool and die makers are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

Science Library of Test Items. Volume Two.

ERIC Educational Resources Information Center

New South Wales Dept. of Education, Sydney (Australia).

The second volume of test items in the Science Library of Test Items is intended as a resource to assist teachers in implementing and evaluating science courses in the first 4 years of Australian secondary school. The items were selected from questions submitted to the School Certificate Development Unit by teachers in New South Wales. Only the…

The Training Requirements of the Clothing Industry. A Survey of Selected Occupations.

ERIC Educational Resources Information Center

Berry, Kathleen M.; Kuhl, Dean H.

This survey was conducted in order to determine the training requirements of the clothing industry in South Australia. The results and findings are intended to be used as a means for upgrading and revising the Clothing Production Certificate Course and for providing suitable training programs for other key occupations within the industry. Survey…

Transmission Mechanic. Apprenticeship Training Standards = Mecanicien de boites de vitesses. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for transmission mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

Mississippi Curriculum Framework for Collision Repair Technology (Program CIP: 47.0603--Auto/Autobody Repair). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the collision repair technology programs cluster. Presented in the introductory section are a description of the program and suggested course sequences for 1- and 2-year certificates. Section…

Teacher Views on the Effects of the Change from Coursework to Controlled Assessment in GCSEs

ERIC Educational Resources Information Center

Crisp, Victoria; Green, Sylvia

2013-01-01

When General Certificates of Secondary Education (GCSEs) were introduced in the late 1980s, coursework was included as a requirement in many subjects. Coursework was intended to help best represent students' attainments, but concerns about various issues (e.g., tasks becoming formulaic, authenticity of student work, workload) led to a review and…

Farm Equipment Mechanic. Apprenticeship Training Standards = Mecanicien de machines agricoles. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for farm equipment mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are…

9 CFR 98.35 - Declaration, health certificate, and other documents for animal semen.

Code of Federal Regulations, 2010 CFR

2010-01-01

... broker, the origin of the animal semen, the number, breed, species, and purpose of the importation, the... semen; (3) The date of semen collection; (4) The identification and breed of the donor animal; (5) The... sheep or goat semen intended for importation from any part of the world shall, in addition to the...

9 CFR 98.35 - Declaration, health certificate, and other documents for animal semen.

Code of Federal Regulations, 2011 CFR

2011-01-01

... broker, the origin of the animal semen, the number, breed, species, and purpose of the importation, the... semen; (3) The date of semen collection; (4) The identification and breed of the donor animal; (5) The... sheep or goat semen intended for importation from any part of the world shall, in addition to the...

A Mastery Rubric: Guiding Curriculum Design, Admissions and Development of Course Objectives

ERIC Educational Resources Information Center

Tractenberg, Rochelle E.; Umans, Jason G.; McCarter, Robert J.

2010-01-01

This article describes a "Mastery Rubric" (MR) used to design both the curriculum and the assessments in a new two-year certificate programme intended to train physicians in clinical research skills. The MR for clinical research skills is built around a set of core research skills: critical review of literature; articulation of research objective;…

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Fruit Pest Control.

ERIC Educational Resources Information Center

Brunner, J.; And Others

This manual is intended to assist pesticide applicators prepare for certification under the Michigan Pesticide Control Act of 1976. The primary focus of this publication is on fruit pest control. Sections included are: (1) Causes of fruit diseases; (2) Fruit fungicides and bactericides; (3) Insect and mite pests; (4) Insecticides and miticides;…

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Aquatic Pest Control.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This manual is intended to assist pesticide applicators in the area of aquatic pest control meet the requirements of the Michigan Department of Agriculture for certification. The Environmental Protection Agency (EPA) Aquatic Pest Control Guide served as a basis for this manual. The six sections presented describe: (1) Aquatic pest control; (2)…

Global National Qualifications Framework Inventory: Country Cases from EU and ETF Partner Countries

ERIC Educational Resources Information Center

Cedefop - European Centre for the Development of Vocational Training, 2013

2013-01-01

Certificates, diplomas and titles are commonly known as qualifications. Their purpose is to show employers, training providers, and individuals what the person holding the qualification has learned and can do. Every country issues many different qualifications, but for the European labor market to work as intended--that is for European citizens to…

Motor Vehicle Mechanic. Apprenticeship Training Standards = Mecanicien d'automobiles. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for motor vehicle mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

Marine Engine Mechanic. Apprenticeship Training Standards = Mecanicien de bateaux a moteur. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for marine engine mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…

Pilot Transition Courses for Complex Single-Engine and Light Twin-Engine Airplanes.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC.

This publication is intended for use by certificated airplane pilots and provides transitional knowledge and skills for more complex single-engine or light twin-engine airplanes. The training should be conducted by a competent flight instructor certified in the class of airplane and familiar with the make and model. A syllabus outline of ground…

Heavy Duty Equipment Mechanic. Apprenticeship Training Standards = Mecanicien d'equipement lourd. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for heavy duty equipment mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are…

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Ornamental and Turf Pest Control.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This manual is intended to assist pesticide applicators in the area of ornamental and turf pest control prepare for certification under the Michigan Pesticide Control Act of 1976. The three sections presented describe: (1) Ornamentals; (2) Turfgrass; and (3) Pest Control. Section one discusses the diagnostic chart for plant problems, non-pest…

Constitution of the State of Illinois and United States: Study Guide.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield.

The study guide, intended for adults wishing to obtain a General Educational Development (GED) certificate in Illinois, discusses the U.S. Constitution, the Illinois Constitution, the Declaration of Independence, and rules for displaying the U.S. flag. The objective is to aid adults in passing the constitution component of the GED examination.…

75 FR 77838 - Circular Welded Non-Alloy Steel Pipe From the Republic of Korea: Preliminary Results of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

..., the Republic of Korea (Korea), Mexico, and Venezuela, and Amendment to Final Determination of Sales at... Duties, 68 FR 23954 (May 6, 2003) (``Assessment Policy Notice''). Based on Hyundai HYSCO's certification... instructions do not alleviate the concerns which the Assessment Policy Notice clarification was intended to...

Type Certification Process

DOT National Transportation Integrated Search

1995-03-02

This order prescribes the responsibilities and procedures for Federal Aviation Administration (FAA) aircraft certification personnel responsible for the certification process required by the Federal Aviation Regulations for civil aircraft,aircraft en...

Framework for Design of Traceability System on Organic Rice Certification

NASA Astrophysics Data System (ADS)

Purwandoko, P. B.; Seminar, K. B.; Sutrisno; Sugiyanta

2018-05-01

Nowadays, the preferences of organic products such as organic rice have been increased. It because of the people awareness of the healthy and eco-friendly food product consumption has grown. Therefore, it is very important to ensure organic quality of the product that will be produced. Certification is a series of process that holds to ensure the quality of products meets all criteria of organic standards. Currently, there is a problem that traceability information system for organic rice certification has been not available. The current system still conducts manually caused the loss of information during storage process. This paper aimed at developing a traceability framework on organic rice certification process. First, the main discussed issues are organic certification process. Second, unified modeling language (UML) is used to build the model of user requirement in order to develop traceability system for all actors in the certification process. Furthermore, the information captured model along certification process will be explained in this paper. The model shows the information flow that has to be recorded for each actor. Finally, the challenges in the implementation system will be discussed in this paper.

An Operational Safety and Certification Assessment of a TASAR EFB Application

NASA Technical Reports Server (NTRS)

Koczo, Stefan; Wing, David

2013-01-01

This paper presents an overview of a Traffic Aware Strategic Aircrew Requests (TASAR) Electronic Flight Bag application intended to inform the pilot of trajectory improvement opportunities while en route that result in operational benefits. The results of safety analyses and a detailed review of Federal Aviation Administration (FAA) regulatory documents that establish certification and operational approval requirements are presented for TASAR. The safety analyses indicate that TASAR has a likely Failure Effects Classification of “No Effect,” and at most, is no worse than “Minor Effect.” Based on this safety assessment and the detailed review of FAA regulatory documents that determine certification and operational approval requirements, this study concludes that TASAR can be implemented in the flight deck as a Type B software application hosted on a Class 2 Portable Electronic Device (PED) Electronic Flight Bag (EFB). This implementation approach would provide a relatively low-cost path to certification and operational approval for both retrofit and forward fit implementation, while at the same time facilitating the business case for early ADS-B IN equipage. A preliminary review by FAA certification and operational approvers of the analyses presented here confirmed that the conclusions are appropriate and that TASAR will be considered a Type B application.

28 CFR 26.23 - Certification process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Certification process. 26.23 Section 26.23 Judicial Administration DEPARTMENT OF JUSTICE DEATH SENTENCES PROCEDURES Certification Process for... mechanism for providing legal representation to indigent prisoners in state postconviction proceedings in...

75 FR 75955 - Notice of Request for Extension and Revision of a Currently Approved Information Collection for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Governing Inspection and Certification of Processed Fruits and Vegetables and Related Products AGENCY...: ``Regulations Governing Inspection and Certification of Processed Fruits and Vegetables and Related Products--7..., certifications of quantity and quality, import product inspections, and export certification. Affected public may...

Software Certification and Software Certificate Management Systems

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2005-01-01

Incremental certification and re-certification of code as it is developed and modified is a prerequisite for applying modem, evolutionary development processes, which are especially relevant for NASA. For example, the Columbia Accident Investigation Board (CAIB) report 121 concluded there is "the need for improved and uniform statistical sampling, audit, and certification processes". Also, re-certification time has been a limiting factor in making changes to Space Shuttle code close to launch time. This is likely to be an even bigger problem with the rapid turnaround required in developing NASA s replacement for the Space Shuttle, the Crew Exploration Vehicle (CEV). Hence, intelligent development processes are needed which place certification at the center of development. If certification tools provide useful information, such as estimated time and effort, they are more likely to be adopted. The ultimate impact of such a tool will be reduced effort and increased reliability.

78 FR 40627 - Prohibitions and Conditions on the Importation and Exportation of Rough Diamonds

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... November 5, 2002, the launch of the Kimberley Process Certification Scheme (KPCS) for rough diamonds. Under... implements the Kimberley Process Certification Scheme (KPCS) for rough diamonds. The KPCS is a process, based... not been controlled through the Kimberley Process Certification Scheme. By Executive Order 13312 dated...

Product-based Safety Certification for Medical Devices Embedded Software.

PubMed

Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

2015-01-01

Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

School Vouchers: Stealing from the Poor to Give to the Rich?

ERIC Educational Resources Information Center

San Jose, Alyssa L.

2017-01-01

School vouchers are defined as certificates of government funding that are allocated to students and intended to defer the cost of tuition at a private school of the student or the student's parents' choice. With strong views on opposing sides, the issue of school choice and the corresponding use of vouchers has certainly been catapulted into the…

49 CFR Appendix A to Part 223 - Certification of Glazing Materials

Code of Federal Regulations, 2011 CFR

2011-10-01

... material to be tested (Target Material) shall be a full scale sample of the largest dimension intended to... weight impacts at a minimum of 960 feet per second velocity. (ii) Large Object Impact in which a cinder block of 24 lbs minimum weight with dimensions of 8 inches by 8 inches by 16 inches nominally impacts at...

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Right-of-Way Pest Control.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This manual is intended to assist pesticide applicators who are engaged in right-of-way pest control to meet the requirements of the Michigan Department of Agriculture for certification. While the majority of material in this guide pertains to vegetation management, the guide also addresses right-of-way insect and fungus control. An introduction…

Critical Thinking as Reflected in the Sudanese and Jordanian Secondary School Certificate English Language Examinations

ERIC Educational Resources Information Center

Sharif, Khalid Sharif Mohammed; Siddiek, Ahmed Gumaa

2017-01-01

This study emerges from the need of English Language Teachers in Sudan and Jordan to lay appropriate assessment strategies to meet the anticipated educational objectives among the learners of English. It is also hoped to improve language assessment in similar educational environments in the Arab world. We intended to find out the level of…

Truck and Coach Mechanic. Apprenticeship Training Standards = Mecanicien de camions et d'autobus. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

This manual presents training standards for truck and coach mechanics and is intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training…

Mathematics for Water and Wastewater Treatment Plant Operators. Water and Wastewater Training Program.

ERIC Educational Resources Information Center

South Dakota Dept. of Environmental Protection, Pierre.

This booklet is intended to aid the prospective waste treatment plant operator or drinking water plant operator in learning to solve mathematical problems, which is necessary for Class I certification. It deals with the basic mathematics which a Class I operator may require in accomplishing day-to-day tasks. The book also progresses into problems…

78 FR 22421 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... with its special function as a naval ship. The intended effect of this rule is to warn mariners in... specific provisions of 72 COLREGS without interfering with its special function as a naval ship: Annex I paragraph 2 (a)(i), pertaining to the location of the forward masthead light at a height not less than 12...

75 FR 29193 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... function as a naval ship. The intended effect of this rule is to warn mariners in waters where 72 COLREGS... as a naval ship: Annex I, paragraph 2(f)(i), pertaining to the placement of the masthead light or... the vertical placement of task lights; Annex I, paragraph 3(a), pertaining to the location of the...

76 FR 58399 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... special function as a naval ship. The intended effect of this rule is to warn mariners in waters where 72... provisions of 72 COLREGS without interfering with its special function as a naval ship: Annex I paragraph 2(a)(i), pertaining to the location of the height of the forward masthead light above the hull; Annex I...

77 FR 12993 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...), pertaining to the location of the forward masthead light in the forward quarter of the ship, and the... its special function as a naval ship. The intended effect of this rule is to warn mariners in waters... provisions of 72 COLREGS without interfering with its special function as a naval ship: Annex I, paragraph 2...

Auto Body Repairer (Branch 2). Performance Demonstration Guidelines. Apprenticeship Training Program = Carrossiers automobiles (categorie 2). Programme de formation des apprentis.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

This manual presents training standards for auto body repairers (branch 2) and is intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training…

Alignment and Brakes Mechanic. Apprenticeship Training Standards = Mecanicien regleur d'avant-train et reparateur de freins. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for alignment and brakes mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are…

75 FR 11734 - Damage Tolerance Data for Repairs and Alterations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

....43(e) The change to Sec. 26.43(e) clarifies that this section does not apply to type certificate (TC... after January 11, 2008. This change is relieving to TC holders and does not impact a TC holder's ability to comply with Sec. 26.43(e). The FAA did not intend to require TC holders to develop repair...

Fuel and Electrical Systems Mechanic. Apprenticeship Training Standards = Mecanicien de systemes d'alimentation en carburant et electriques. Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

These training standards for fuel and electrical systems mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related…

Science Topics for Third and Fourth Year Non-S.C.E. Courses.

ERIC Educational Resources Information Center

Scottish Education Dept., Edinburgh.

This publication contains details of 18 science topics based upon the general science objectives stated by the Working Party on Secondary School Science for pupils in the third and fourth years of Scottish secondary schools who do not intend to take courses leading to the Scottish Certificate of Education examinations (see SE 015 432). The topics…

Program Standards for the Initial Preparation of Social Studies Teachers. National Standards for Social Studies Teachers. Volume II. 2004 Revision

ERIC Educational Resources Information Center

National Council for the Social Studies, 2004

2004-01-01

This document is intended to be used: (1) By institutions that prepare teachers to assess the quality of their teacher preparation programs for licensure (or certification) in comprehensive social studies and/or the individual disciplines of history, geography, civics and government, economics, and psychology; and (2) By National Council for the…

Summary of the diamond resource potential and production capacity assessment of Guinea

USGS Publications Warehouse

Chirico, Peter G.; Malpeli, Katherine C.

2012-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. As of August 2012, the Kimberley Process (KP) had 51 participants representing 77 countries. With the passing of the AD, the Plenary agreed that further efforts should be made to assess Guinea's diamond production capacity. In support of this objective, the U.S. Geological Survey (USGS) partnered with the Kimberley Process Working Group of Diamond Experts (WGDE) and Guinea's Ministry of Mines and Geology (MMG) to conduct a field campaign in Guinea from April 24 through May 2, 2010. The field team was composed of Mark Van Bockstael of the WGDE, Peter Chirico of the USGS, and several geologists from the MMG. The team visited diamond mining sites in western Guinea's Kindia, Forècariah, Coyah, and Tèlimèlè Prefectures, in which the Guinean government identified newly discovered deposits mined by artisans. Several mining sites within the Kissidougou Prefecture in southeastern Guinea were also visited as part of this study. Geologic and geomorphic information on the diamond deposits was collected at each site. The fieldwork conducted during this trip served as a means of acquiring critical data needed to conduct a full assessment of diamond resources and production capacity.

Implementation Of The Materials Certification Process

DOT National Transportation Integrated Search

2000-05-26

The South Dakota Department of Transportation has committed resources to investigate certification practices across the United States, and to develop and implement an improved material certification process. The research team reviewed Study SD96-06 a...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

7 CFR 868.262 - Grade designation and other certificate information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Brown Rice for Processing Principles Governing Application of Standards § 868.262 Grade designation and other certificate information. (a) Brown rice for processing. The grade designation for all classes of Brown rice for processing shall be included on the certificate grade-line in the following order: (1...

Direct Certification Process. Nourishing News. Volume 4, Issue 3

ERIC Educational Resources Information Center

Idaho State Department of Education, 2009

2009-01-01

This newsletter discusses the Electronic Direct Certification process and provides additional insight as needed. Under this New Direct Certification process school districts compare information from their student information system to Idaho State Department of Health and Welfare database to certify children receiving Food Stamps or TAFI as…

78 FR 12135 - List of Participating Countries and Entities (Hereinafter Known as “Participants”) Under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-21

... has not been controlled through the Kimberley Process Certification Scheme (KPCS). Under Section 3(2) of the Act, ``controlled through the Kimberley Process Certification Scheme'' means an importation... Kimberley Process Certification Scheme. Angola--Ministry of Geology and Mines. Armenia--Ministry of Trade...

Recent developments in the field of environmental reference materials at the JRC Ispra.

PubMed

Muntau, H

2001-06-01

The production of reference materials for environmental analysis started in the Joint Research Centre at Ispra/Italy in 1972 with the objective of later certification by the BCR, but for obvious budget reasons only a fraction of the total production achieved at Ispra ever reached certification level, although all materials were produced according to the severe quality requirements requested for certified reference materials. Therefore, the materials not destinated to certification are in growing demand as inter-laboratory test materials and as laboratory reference materials, for internal quality control, e.g., by control charts. The history of reference material production within the Joint Research Centre is briefly reviewed and the latest additions described. New developments such as micro-scale reference materials intended for analytical methods requiring sample intakes at milligram or sub-milligram level and therefor not finding supply on the reference material market, and "wet" environmental reference materials, which meet more precisely the "real-world" environmental analysis conditions, are presented and the state-of-the-art discussed.

Application for certification, 1991 model year light-duty vehicles - Sports Car America, Puma Division Inc

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-01-01

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty vehicles from Sports Car America, PUMA Division Incorporated. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, andmore » proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Mock Certification Basis for an Unmanned Rotorcraft for Precision Agricultural Spraying

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Maddalon, Jeffrey M.; Neogi, Natasha A.; Verstynen, Harry A.; Buelow, Barry; McCormick, G. Frank

2015-01-01

This technical report presents the results of a case study using a hazard-based approach to develop preliminary design and performance criteria for an unmanned agricultural rotorcraft requiring airworthiness certification. This case study is one of the first in the public domain to examine design and performance criteria for an unmanned aircraft system (UAS) in tandem with its concept of operations. The case study results are intended to support development of airworthiness standards that could form a minimum safety baseline for midsize unmanned rotorcraft performing precision agricultural spraying operations under beyond visual line-of-sight conditions in a rural environment. This study investigates the applicability of current methods, processes, and standards for assuring airworthiness of conventionally piloted (manned) aircraft to assuring the airworthiness of UAS. The study started with the development of a detailed concept of operations for precision agricultural spraying with an unmanned rotorcraft (pp. 5-18). The concept of operations in conjunction with a specimen unmanned rotorcraft were used to develop an operational context and a list of relevant hazards (p. 22). Minimum design and performance requirements necessary to mitigate the hazards provide the foundation of a proposed (or mock) type certification basis. A type certification basis specifies the applicable standards an applicant must show compliance with to receive regulatory approval. A detailed analysis of the current airworthiness regulations for normal-category rotorcraft (14 Code of Federal Regulations, Part 27) was performed. Each Part 27 regulation was evaluated to determine whether it mitigated one of the relevant hazards for the specimen UAS. Those regulations that did were included in the initial core of the type certification basis (pp. 26-31) as written or with some simple modifications. Those regulations that did not mitigate a recognized hazard were excluded from the certification basis. The remaining regulations were applicable in intent, but the text could not be easily tailored. Those regulations were addressed in separate issue papers. Exploiting established regulations avoids the difficult task of generating and interpreting novel requirements, through the use of acceptable, standardized language. The rationale for the disposition of the regulations was assessed and captured (pp. 58-115). The core basis was then augmented by generating additional requirements (pp. 38-47) to mitigate hazards for an unmanned sprayer that are not covered in Part 27.

77 FR 27831 - List of Participating Countries and Entities Under the Clean Diamond Trade Act of 2003

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... Kimberley Process Certification Scheme (KPCS). Under Section 3(2) of the Act, ``controlled through the Kimberley Process Certification Scheme'' means an importation from the territory of a Participant or... Participants in the Kimberley Process Certification Scheme. Angola--Ministry of Geology and Mines. Armenia...

31 CFR 592.201 - Prohibited importation and exportation of any rough diamond; permitted importation or exportation...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., unless the rough diamond has been controlled through the Kimberley Process Certification Scheme. (b) The... States of any rough diamond not controlled through the Kimberley Process Certification Scheme do not... Process Certification Scheme and thus is not permitted, except in the following circumstance. The...

Turning Schools Around: The National Board Certification Process as a School Improvement Strategy

ERIC Educational Resources Information Center

Jaquith, Ann; Snyder, Jon

2016-01-01

Can the National Board certification process support school improvement where large proportions of students score below grade level on standardized tests? This SCOPE study examines a project that sought to seize and capitalize upon the learning opportunities embedded in the National Board certification process, particularly opportunities to learn…

Turning Schools Around: The National Board Certification Process as a School Improvement Strategy. Research Brief

ERIC Educational Resources Information Center

Jaquith, Ann; Snyder, Jon

2016-01-01

Can the National Board certification process support school improvement where large proportions of students score below grade level on standardized tests? This SCOPE study examines a project that sought to seize and capitalize upon the learning opportunities embedded in the National Board certification process, particularly opportunities to learn…

40 CFR 75.20 - Initial certification and recertification procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

40 CFR 75.20 - Initial certification and recertification procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

40 CFR 75.20 - Initial certification and recertification procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... all applicable initial certification tests under paragraph (c) of this section are completed by the... installed, initial certification is required. (1) Notification of initial certification test dates. The...) tests. (4) Certification (or recertification) application formal approval process. The Administrator...

40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2012 CFR

2012-07-01

... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2013 CFR

2013-07-01

... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

40 CFR 1054.235 - What exhaust emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2014 CFR

2014-07-01

... specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause the engine to exceed...

40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2010 CFR

2010-07-01

... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

40 CFR 1054.235 - What exhaust emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2012 CFR

2012-07-01

... specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause the engine to exceed...

40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2011 CFR

2011-07-01

... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

40 CFR 1045.235 - What emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2014 CFR

2014-07-01

... procedures and equipment specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause...

40 CFR 1054.235 - What exhaust emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause the engine to exceed...

40 CFR 1054.235 - What exhaust emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2013 CFR

2013-07-01

... specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause the engine to exceed...

40 CFR 1054.235 - What exhaust emission testing must I perform for my application for a certificate of conformity?

Code of Federal Regulations, 2011 CFR

2011-07-01

... specified in subpart F of this part. In the case of dual-fuel engines, measure emissions when operating with each type of fuel for which you intend to certify the engine. In the case of flexible-fuel engines, measure emissions when operating with the fuel mixture that is most likely to cause the engine to exceed...

34 CFR 682.603 - Certification by a participating school in connection with a loan application.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of a parent borrower, the student for whom the loan is intended, is complete and accurate. Except as provided in 34 CFR part 668, subpart E, a school may rely in good faith upon statements made by the borrower and, in the case of a parent borrower of a PLUS loan, the student and the parent borrower. (b) The...

75 FR 39795 - Airworthiness Directives; Aircraft Industries a.s. (Type Certificate G60EU Previously Held by...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

...-0684; Directorate Identifier 2010-CE-031-AD; Amendment 39-16360; AD 2010-14-15] RIN 2120-AA64... to fatigue. This AD requires actions that are intended to address the unsafe condition described in..., Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday...

2015 American Academy of Clinical Neuropsychology (AACN) student affairs committee survey of neuropsychology trainees.

PubMed

Whiteside, Douglas M; Guidotti Breting, Leslie M; Butts, Alissa M; Hahn-Ketter, Amanda E; Osborn, Katie; Towns, Stephanie J; Barisa, Mark; Santos, Octavio A; Smith, Daniel

2016-07-01

Surveys of practicing neuropsychologists have been conducted for years; however, there have been no comprehensive surveys of neuropsychology trainees, which may result in important issues being overlooked by the profession. This survey assessed trainees' experiences in areas such as student debt, professional development, and training satisfaction. Survey items were written by a task force of the AACN Student Affairs Committee (SAC), and neuropsychology trainees were recruited via neuropsychology-focused listservs. In total, 344 trainees completed the survey (75% female) and included participants from every region of the US and Canada. Based on the survey questions, nearly half of all trainees (47%) indicated financial factors were the greatest limitation in their training. Student debt had a bimodal distribution; 32.7% had minimal debt, but 45% had debt >$100,000. In contrast, expected starting salaries were modest, but consistent with findings ($80-100,000). While almost all trainees intended to pursue board certification (97% through ABPP), many were 'not at all' or only 'somewhat' familiar with the process. Results indicated additional critical concerns beyond those related to debt and lack of familiarity with board certification procedures. The results will inform SAC conference programming and the profession on the current 'state of the trainees' in neuropsychology.

Quality assurance and risk management: Perspectives on Human Factors Certification of Advanced Aviation Systems

NASA Technical Reports Server (NTRS)

Taylor, Robert M.; Macleod, Iain S.

1994-01-01

This paper is based on the experience of engineering psychologists advising the U.K. Ministry of Defense (MoD) on the procurement of advanced aviation systems that conform to good human engineering (HE) practice. Traditional approaches to HE in systems procurement focus on the physical nature of the human-machine interface. Advanced aviation systems present increasingly complex design requirements for human functional integration, information processing, and cognitive task performance effectiveness. These developing requirements present new challenges for HE quality assurance (QA) and risk management, requiring focus on design processes as well as on design content or product. A new approach to the application of HE, recently adopted by NATO, provides more systematic ordering and control of HE processes and activities to meet the challenges of advanced aircrew systems design. This systematic approach to HE has been applied by MoD to the procurement of mission systems for the Royal Navy Merlin helicopter. In MoD procurement, certification is a judicial function, essentially independent of the service customer and industry contractor. Certification decisions are based on advice from MoD's appointed Acceptance Agency. Test and evaluation (T&E) conducted by the contractor and by the Acceptance Agency provide evidence for certification. Certification identifies limitations of systems upon release to the service. Evidence of compliance with HE standards traditionally forms the main basis of HE certification and significant non-compliance could restrict release. The systems HE approach shows concern for the quality of processes as well as for the content of the product. Human factors certification should be concerned with the quality of HE processes as well as products. Certification should require proof of process as well as proof of content and performance. QA criteria such as completeness, consistency, timeliness, and compatibility provide generic guidelines for progressive acceptance and certification of HE processes. Threats to the validity of certification arise from problems and assumptions in T&E methods. T&E should seek to reduce the risk of specification non-compliance and certification failure.

[From idea to standard care-a field report].

PubMed

Herberz, Chantal; Steidl, Ralph; Werner, Pascal; Hagen, Julia

2018-03-01

Digital health products and services have started to fundamentally change healthcare and prevention. Products intended for a medical use require CE-marking and potentially certification (ISO 13485) of the company. Startups play an important role in the development of new digital products and services. Two startups share their experience with these processes. Becoming a part of standard care and hence being reimbursed is a challenge for startups. For this reason, startups pursue alternative sources of income, too. The statutory health insurance's procedures for assessing new products and services are perceived as long. Startups are required to provide evidence of the benefit of their product at an early stage in the procedure. This requires time-consuming and costly studies. Startups would therefore appreciate support in generating this evidence, e. g. through adequate procedures for testing.

Towards Rapid Re-Certification Using Formal Analysis

DTIC Science & Technology

2015-07-22

profiles will help ensure that information assurance requirements are commensurate with risk and scalable based on an application’s changing external...20 Scalability Evaluation .......................................................................................................... 22...agility in certification processes. Software re-certification processes require significant expenditure in order to provide evidence of information

45 CFR 155.1010 - Certification process for QHPs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 155.1010 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Certification of Qualified Health Plans § 155.1010 Certification process for QHPs. (a...

Alluvial diamond resource potential and production capacity assessment of the Central African Republic

USGS Publications Warehouse

Chirico, Peter G.; Barthelemy, Francis; Ngbokoto, Francois A.

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflict concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberly Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. Over 70 countries were included as members of the KPCS at the end of 2007. To prevent trade in "conflict diamonds" while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was (1) to assess the naturally occurring endowment of diamonds in the Central African Republic (potential resources) based on geological evidence, previous studies, and recent field data and (2) to assess the diamond-production capacity and measure the intensity of mining activity. Several possible methods can be used to estimate the potential diamond resource. However, because there is generally a lack of sufficient and consistent data recording all diamond mining in the Central African Republic and because time to conduct fieldwork and accessibility to the diamond mining areas are limited, two different methodologies were used: the volume and grade approach and the content per kilometer approach. Estimates are that approximately 39,000,000 carats of alluvial diamonds remain in the eastern and western zones of the CAR combined. This amount is roughly twice the total amount of diamonds reportedly exported from the Central African Republic since 1931. Production capacity is calculated to be 840,000 carats per year, a number that is nearly twice the 450,000 carats per year reported annually by the Central African Republic. The difference in the two numbers reflects the lack of sufficient data on diamond resource grades, worker productivity, and the number and locations of sites being worked.

Holistic nurses' examinations: past, present, future.

PubMed

Erickson, Helen L

2009-09-01

Social and professional paradigm shifts of the 1990s moved holistic nursing into the mainstream of health care, resulting in the need for national certification of Holistic Nurses. Given the assumptions that certification examinations are based on the knowledge, skills, and abilities prerequisite for competent practice in a given specialty, and that the certification credential tells the public and peers that the certificant has such knowledge, The American Holistic Nurses Association's Leadership Council (AHNA-LC) initiated certification processes in 1994. On the request of AHNA-LC, the American Holistic Nurses' Certification Corporation (AHNCC) assumed these responsibilities in April, 1997. Since then, AHNCC has overseen the revision of the first certification process for holistic nursing prepared at the baccalaureate level and development of a second one designed for holistic nurses prepared in graduate nursing programs. This article describe these developmental processes.

Implementation of thermographers' certification in Brazil

NASA Astrophysics Data System (ADS)

dos Santos, Laerte; Alves, Luiz M.; da Costa Bortoni, Edson

2011-05-01

In recent years Brazil has experienced extraordinary growth despite the recent economic global crisis. The demand for infrared thermography products and services has accompanied this growth. Like other non-destructive testing and inspection, the results obtained by thermography are highly dependent on the skills of thermographer. Therefore, it is very important to establish a serious and recognized process of certification to assess thermographers' qualifications and help services suppliers to establish credibility with their customers and increase the confidence of these costumers on the quality of these services. The Brazilian Society of Non-Destructive Testing and Inspection, ABENDI, a non-profitable, private technical-scientific entity, recognized nationally and internationally, has observed the necessity of starting a process for certification of thermographers in Brazil. With support of a work group composed by experts from oil and energy industries, transportation, universities and manufactures, the activities started in 2005. This paper describes the economic background required for installation of the certification process, its initial steps, the main characteristics of the Brazilian certification and the expectation for initiating the certification process.

Family medicine residency program directors' plans to incorporate maintenance of certification into residency training: a CERA survey.

PubMed

Peterson, Lars E; Blackburn, Brenna; Phillips, Robert L; Mainous, Arch G

2014-04-01

Participation in Maintenance of Certification for Family Physicians (MC-FP) is now a requirement for residents to take the American Board of Family Medicine (ABFM) certification examination. The objective of this study was to determine baseline use of MC-FP products prior to this requirement and assess how family medicine residency program directors (FMPD) intended to integrate MC-FP into residency education. We used the CERA platform to survey FMPDs. In addition to the core CERA demographic questions, we asked about the use of MC-FP in residency, how FMPDs intended to incorporate MC-FP, and how useful they believe MC-FP will be for resident evaluation. Additionally, we compared select results with the ABFM administrative database. A total of 224 FMPDs responded, for a 50.6% response rate. There was agreement between CERA and ABFM data on the percentage of residencies already using Part 4 modules (39.3% versus 38.8%) but not Part 2 modules (24.7% versus 62.8%). Group MC-FP activities were the preferred method for both Part 2 (45.0%) and Part 4 (54.4%). Most FMPDs agreed that MC-FP will be effective in teaching quality improvement and assessing competencies. Respondents from dually accredited programs were more likely to have used Part 4, but not Part 2, activities prior to 2012. Prior to MC-FP becoming a requirement in residency, a sizeable minority of residencies were already using these tools for education. Assessment of competencies will be crucial in the Next Accreditation System, and MC-FP may help in tracking clinical development over a physician's career.

A methodology for conducting national-scale alluvial diamond resource potential and production capacity assessments, with a focus on artisanal mining

USGS Publications Warehouse

Chirico, Peter G.; Malpeli, Katherine C.

2012-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme was ratified and signed by diamond-producing and diamond-importing countries. As of August 2012, the Kimberley Process (KP) had 51 participants representing 77 countries. It is often difficult to obtain independent verification of the diamond production statistics that are provided to the KP. However, some degree of independent verification can be obtained through an understanding of a country’s naturally occurring endowment of diamonds and the intensity of mining activities. Studies that integrate these two components can produce a range of estimated values for a country’s diamond production, and these estimates can then be compared to the production statistics released by that country. This methodology is used to calculate (1) the diamond resource potential of a country, which refers to the total number of carats estimated to be remaining in the country, and (2) the diamond production capacity of a country, which is the current volume of diamonds that may realistically be produced per year utilizing current human and physical resources. The following sections outline the methodology used by the U.S. Geological Survey (USGS) to perform diamond assessments in Mali, the Central African Republic, Ghana, and Guinea.

7 CFR 52.28 - Appeal inspection certificate.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 Regulations Governing Inspection and Certification Appeal Inspection § 52.28...

7 CFR 52.18 - Issuance of certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 Regulations Governing Inspection and Certification Inspection Service § 52.18...

Certification & validation of biosafety level-2 & biosafety level-3 laboratories in Indian settings & common issues

PubMed Central

Mourya, Devendra T.; Yadav, Pragya D.; Khare, Ajay; Khan, Anwar H.

2017-01-01

With increasing awareness regarding biorisk management worldwide, many biosafety laboratories are being setup in India. It is important for the facility users, project managers and the executing agencies to understand the process of validation and certification of such biosafety laboratories. There are some international guidelines available, but there are no national guidelines or reference standards available in India on certification and validation of biosafety laboratories. There is no accredited government/private agency available in India to undertake validation and certification of biosafety laboratories. Therefore, the reliance is mostly on indigenous experience, talent and expertise available, which is in short supply. This article elucidates the process of certification and validation of biosafety laboratories in a concise manner for the understanding of the concerned users and suggests the important parameters and criteria that should be considered and addressed during the laboratory certification and validation process. PMID:29434059

Certification & validation of biosafety level-2 & biosafety level-3 laboratories in Indian settings & common issues.

PubMed

Mourya, Devendra T; Yadav, Pragya D; Khare, Ajay; Khan, Anwar H

2017-10-01

With increasing awareness regarding biorisk management worldwide, many biosafety laboratories are being setup in India. It is important for the facility users, project managers and the executing agencies to understand the process of validation and certification of such biosafety laboratories. There are some international guidelines available, but there are no national guidelines or reference standards available in India on certification and validation of biosafety laboratories. There is no accredited government/private agency available in India to undertake validation and certification of biosafety laboratories. Therefore, the reliance is mostly on indigenous experience, talent and expertise available, which is in short supply. This article elucidates the process of certification and validation of biosafety laboratories in a concise manner for the understanding of the concerned users and suggests the important parameters and criteria that should be considered and addressed during the laboratory certification and validation process.

Auto Body and Collision Damage Repairer (Branch 1). Apprenticeship Training Standards = Reparateur de carrossiers et de dommages resultant d'une collision (categorie 1). Normes de formation en apprentissage.

ERIC Educational Resources Information Center

Ontario Ministry of Skills Development, Toronto.

This manual presents training standards for auto body and collision damage repairers (branch 1) and is intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and…

7 CFR 52.19 - Issuance of corrected certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 Regulations Governing Inspection and Certification Inspection Service § 52.19...

77 FR 74852 - Draft Guidance for Industry on Certification of Designated Medical Gases; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... the availability of a draft guidance for industry entitled ``Certification Process for Designated Medical Gases.'' This draft guidance describes the new certification process created by the Food and Drug Administration Safety and Innovation Act (FDASIA) for certain medical gases and explains how FDA plans to...

Certification for civil flight decks and the human-computer interface

NASA Technical Reports Server (NTRS)

Mcclumpha, Andrew J.; Rudisill, Marianne

1994-01-01

This paper will address the issue of human factor aspects of civil flight deck certification, with emphasis on the pilot's interface with automation. In particular, three questions will be asked that relate to this certification process: (1) are the methods, data, and guidelines available from human factors to adequately address the problems of certifying as safe and error tolerant the complex automated systems of modern civil transport aircraft; (2) do aircraft manufacturers effectively apply human factors information during the aircraft flight deck design process; and (3) do regulatory authorities effectively apply human factors information during the aircraft certification process?

Employing National Board Certification Practices with All Teachers: The Potential of Cognitive Coaching and Mentoring

ERIC Educational Resources Information Center

Diaz, Kirsten Anne

2013-01-01

National Board Certification is an esteemed certification and professional learning and reflective opportunity for teachers. Cognitive coaching is also a method of support many teachers receive over the course of their National Board Certification journey. The certification process involves reflective practices and opportunities for teachers to…

7 CFR 52.39 - Issuance of certificate of sampling.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 Regulations Governing Inspection and Certification Sampling § 52.39 Issuance of...

20 CFR 655.163 - Certification fee.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) Labor Certification Determinations § 655.163 Certification fee. A...

The Leverage of National Board Candidacy: An Exploration of Teacher Learning

ERIC Educational Resources Information Center

Hunzicker, Jana

2008-01-01

The vast majority of teachers who engage in the process of National Board certification describe it as the best professional development they have ever experienced - even when they do not achieve the certification. Learning leverage, an interactive dynamic characterized by rigor, reward, and risk, is what makes the certification process such a…

20 CFR 655.208 - Temporary labor certification applications involving fraud or willful misrepresentation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Labor Certification Process for Logging Employment and Non-H-2A Agricultural Employment § 655.208... prior to a final temporary labor certification determination, or if it is learned that the employer or... employer or agent in writing of this referral. The OFLC Administrator shall continue to process the...

78 FR 27936 - Request for Extension and Revision of a Currently Approved Information Collection With Additional...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... Inspection, Certification, Standards, and Audit Services for Fresh Fruits, Vegetables, and Other Products--7... Certification of Processed Fruits and Vegetables and Related Products-- 7 CFR part 52. This notice also combines... Regulations Governing Inspections and Certification of Processed Fruits and Vegetables and Related Products--7...

Report of the 1981 Certificate in Data Processing Examination.

ERIC Educational Resources Information Center

Psychological Corp., New York, NY.

The Certificate in Data Processing (CDP) Examination conducted by the Institute for Certification of Computer Professionals (ICCP) is one of the qualifications for the CDP. The May 1981 administration tested 3,601 candidates at 149 international test sites. Half of the candidates were taking the examination for the first time and were taking all…

Certification in echocardiography of congenital heart disease: experience of the first 6 years of a European process.

PubMed

Mertens, Luc; Miller, Owen; Fox, Kevin; Simpson, John

2013-02-01

Certification in congenital heart disease echocardiography presents unique challenges compared with certification of adult transthoracic and transoesophageal echocardiography. We report our experience in collaboratively developing an exam process that covers the size and age range of congenital heart patients, the varying professional backgrounds of echocardiography practitioners across the field and our approach to the challenge of introducing a pan-European certification endorsed by the major stakeholder groups; the European Association of Echocardiography (EAE), the Association for European Paediatric and Congenital Cardiology (AEPC) and the Grown Up Congenital Heart Working Group of the European Society of Cardiology (ESC). Since its inception in 2006 the exam has been held seven times; 137 candidates from 27 countries have sat the exam, 107 candidates (78%) have passed the exam components and 60 candidates have successfully completed the logbook submission and have been certified in echocardiography of congenital heart disease echocardiography by the EAE. In addition to the certification process, a comprehensive curriculum, teaching programme, and teaching courses have been developed. The instititution of a European certification process for echocardiography of congenital heart disease has proved feasible.

Certification Systems

EPA Pesticide Factsheets

The WaterSense Product Certification System outlines the process and procedures for the product certification to ensure that all WaterSense labeled products meet EPA's criteria for efficiency and performance.

7 CFR 3434.6 - Certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Certification. 3434.6 Section 3434.6 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HISPANIC-SERVING AGRICULTURAL COLLEGES AND UNIVERSITIES CERTIFICATION PROCESS § 3434.6 Certification. (a) Except as...

7 CFR 3434.6 - Certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Certification. 3434.6 Section 3434.6 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HISPANIC-SERVING AGRICULTURAL COLLEGES AND UNIVERSITIES CERTIFICATION PROCESS § 3434.6 Certification. (a) Except as...

Overcoming information asymmetry in consumer-directed health plans.

PubMed

Retchin, Sheldon M

2007-04-01

Consumer-centric healthcare has been extolled as the centerpiece of a new model for managing both quality and price. However, information asymmetry in consumer-directed health plans (CDHPs) is a challenge that must be addressed. For CDHPs to work as intended and to gain acceptance, consumers need information regarding the quality and price of healthcare purchases. The federal government, particularly the Agency for Healthcare Research and Quality, could function as an official resource for information on performance and comparisons among facilities and providers. Because of workforce constraints among primary care physicians, a new group of healthcare professionals called "medical decision advisors" could be trained. Academic health centers would have to play a critical role in devising an appropriate curriculum, as well as designing a certification and credentialing process. However, with appropriate curricula and training, medical decision advisors could furnish information for consumers and aid in the complicated decisions they will face under CDHPs.

CSER-98-002: Criticality analysis for the storage of special nuclear material sources and standards in the WRAP facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

GOLDBERG, H.J.

1999-05-18

The Waste Receiving and Processing (WRAP) Facility will store uranium and transuranic (TRU) sources and standards for certification that WRAP meets the requirements of the Quality Assurance Program Plan (QAPP) for the Waste Isolation Pilot Plant (WIPP). In addition, WRAP must meet internal requirements for testing and validation of measuring instruments for nondestructive assay (NDA). In order to be certified for WIPP, WRAP will participate in the NDA Performance Demonstration Program (PDP). This program is a blind test of the NDA capabilities for TRU waste. It is intended to ensure that the NDA capabilities of this facility satisfy the requirementsmore » of the quality assurance program plan for the WIPP. The PDP standards have been provided by the Los Alamos National Laboratory (LANL) for this program. These standards will be used in the WRAP facility.« less

Prepare to publish.

PubMed

Price, P M

2000-01-01

"I couldn't possibly write an article." "I don't have anything worthwhile to write about." "I am not qualified to write for publication." Do any of these statements sound familiar? This article is intended to dispel these beliefs. You can write an article. You care for the most complex patients in the health care system so you do have something worthwhile to write about. Beside correct spelling and grammar there are no special skills, certificates or diplomas required for publishing. You are qualified to write for publication. The purpose of this article is to take the mystique out of the publication process. Each step of publishing an article will be explained, from idea formation to framing your first article. Practical examples and recommendations will be presented. The essential components of the APA format necessary for Dynamics: The Official Journal of the Canadian Association of Critical Care Nurses will be outlined and resources to assist you will be provided.

SOLAR PANELS ON HUDSON COUNTY FACILITIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

BARRY, KEVIN

2014-06-06

This project involved the installation of an 83 kW grid-connected photovoltaic system tied into the energy management system of Hudson County's new 60,000 square foot Emergency Operations and Command Center and staff offices. Other renewable energy features of the building include a 15 kW wind turbine, geothermal heating and cooling, natural daylighting, natural ventilation, gray water plumbing system and a green roof. The County intends to seek Silver LEED certification for the facility.

The Certification Bandwagon: Know Where You're Headed before Jumping On.

ERIC Educational Resources Information Center

Barksdale, Susan B.; Lund, Teri B.

1998-01-01

Presents results of research focusing on identifying "certification best practices" to provide a framework for business managers and certification practitioners. Describes a 10-step process for evaluating certification programs that takes into consideration four perspectives: audience, learning, business, and financial. (AEF)

20 CFR 656.32 - Revocation of approved labor certifications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Revocation of approved labor certifications. 656.32 Section 656.32 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR LABOR CERTIFICATION PROCESS FOR PERMANENT EMPLOYMENT OF ALIENS IN THE UNITED STATES Labor Certification...

75 FR 453 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

... certification process. Comments should address the two bases for certification and, if possible, provide data to... DEPARTMENT OF LABOR Employment and Training Administration Request for Certification of Compliance--Rural Industrialization Loan and Grant Program AGENCY: Employment and Training Administration, Labor...

Alternative Teacher Certification--An Update. ERIC Digest.

ERIC Educational Resources Information Center

Otuya, Ebo

This digest reviews alternative certification on the basis of educational quality and the need to fill teacher shortages. Following a definition of traditional certification, the alternative certification route is described as a process designed to certify candidates who have subject-matter competencies, without going through formal teacher…

Getting maintenance of certification to work: a grounded theory study of physicians' perceptions.

PubMed

Cook, David A; Holmboe, Eric S; Sorensen, Kristi J; Berger, Richard A; Wilkinson, John M

2015-01-01

Despite general support for the goals of maintenance of certification (MOC), concerns have been raised about its effectiveness, relevance, and value. To identify barriers and enabling features associated with MOC and how MOC can be changed to better accomplish its intended purposes. Grounded theory focus group study of 50 board-certified primary care and subspecialist internal medicine and family medicine physicians in an academic medical center and outlying community sites. Eleven focus groups. Constant comparative method to analyze transcripts and identify themes related to MOC perceptions and purposes and to construct a model to guide improvement. Participants identified misalignments between the espoused purposes of MOC (eg, to promote high-quality care, commitment to the profession, lifelong learning, and the science of quality improvement) and MOC as currently implemented. At present, MOC is perceived by physicians as an inefficient and logistically difficult activity for learning or assessment, often irrelevant to practice, and of little benefit to physicians, patients, or society. To resolve these misalignments, we propose a model that invites increased support from organizations, effectiveness and relevance of learning activities, value to physicians, integration with clinical practice, and coherence across MOC tasks. Physicians view MOC as an unnecessarily complex process that is misaligned with its purposes. Acknowledging and correcting these misalignments will help MOC meet physicians' needs and improve patient care.

Formal methods and their role in digital systems validation for airborne systems

NASA Technical Reports Server (NTRS)

Rushby, John

1995-01-01

This report is based on one prepared as a chapter for the FAA Digital Systems Validation Handbook (a guide to assist FAA certification specialists with advanced technology issues). Its purpose is to explain the use of formal methods in the specification and verification of software and hardware requirements, designs, and implementations; to identify the benefits, weaknesses, and difficulties in applying these methods to digital systems used in critical applications; and to suggest factors for consideration when formal methods are offered in support of certification. The presentation concentrates on the rationale for formal methods and on their contribution to assurance for critical applications within a context such as that provided by DO-178B (the guidelines for software used on board civil aircraft); it is intended as an introduction for those to whom these topics are new.

78 FR 26103 - Proposed Standard Operating Procedure (SOP) of the Aircraft Certification Service (AIR) Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

... (SOP) of the Aircraft Certification Service (AIR) Project Prioritization and Resource Management ACTION... procedure (SOP) describing the process used to prioritize certification projects and manage certification project resources when local resources are not available. DATES: Comments must be received on or before...

25 CFR 15.104 - Does the agency need a death certificate to prepare a probate file?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Does the agency need a death certificate to prepare a... the Probate Process § 15.104 Does the agency need a death certificate to prepare a probate file? (a) Yes. You must provide us with a certified copy of the death certificate if a death certificate exists...

Current Status and Problems in Certification of Sustainable Forest Management in China

NASA Astrophysics Data System (ADS)

Zhao, Jingzhu; Xie, Dongming; Wang, Danyin; Deng, Hongbing

2011-12-01

Forest certification is a mechanism involving the regulation of trade of forest products in order to protect forest resources and improve forest management. Although China had a late start in adopting this process, the country has made good progress in recent years. As of July 31, 2009, 17 forest management enterprises and more than one million hectares of forests in China have been certified by the Forest Stewardship Council (FSC). Several major factors affect forest certification in China. The first set is institutional in nature. Forest management in China is based on centralized national plans and therefore lacks flexibility. A second factor is public awareness. The importance and value of forest certification are not widely understood and thus consumers do not make informed choices regarding certified forest products. The third major factor is the cost of certification. Together these factors have constrained the development of China's forest certification efforts. However, the process does have great potential. According to preliminary calculations, if 50% of China's commercial forests were certified, the economic cost of forest certification would range from US0.66-86.63 million while the economic benefits for the forestry business sector could exceed US150 million. With continuing progress in forest management practices and the development of international trade in forest products, it becomes important to improve the forest certification process in China. This can be achieved by improving the forest management system, constructing and perfecting market access mechanisms for certificated forest products, and increasing public awareness of environmental protection, forest certification, and their interrelationship.

Current status and problems in certification of sustainable forest management in China.

PubMed

Zhao, Jingzhu; Xie, Dongming; Wang, Danyin; Deng, Hongbing

2011-12-01

Forest certification is a mechanism involving the regulation of trade of forest products in order to protect forest resources and improve forest management. Although China had a late start in adopting this process, the country has made good progress in recent years. As of July 31, 2009, 17 forest management enterprises and more than one million hectares of forests in China have been certified by the Forest Stewardship Council (FSC). Several major factors affect forest certification in China. The first set is institutional in nature. Forest management in China is based on centralized national plans and therefore lacks flexibility. A second factor is public awareness. The importance and value of forest certification are not widely understood and thus consumers do not make informed choices regarding certified forest products. The third major factor is the cost of certification. Together these factors have constrained the development of China's forest certification efforts. However, the process does have great potential. According to preliminary calculations, if 50% of China's commercial forests were certified, the economic cost of forest certification would range from US$0.66-86.63 million while the economic benefits for the forestry business sector could exceed US$150 million. With continuing progress in forest management practices and the development of international trade in forest products, it becomes important to improve the forest certification process in China. This can be achieved by improving the forest management system, constructing and perfecting market access mechanisms for certificated forest products, and increasing public awareness of environmental protection, forest certification, and their interrelationship.

20 CFR 655.20 - Applications for temporary employment certification.

Code of Federal Regulations, 2010 CFR

2010-04-01

... LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and... Nursing in the United States (H-2B Workers) § 655.20 Applications for temporary employment certification...

Preliminary design package for solar heating and hot water system

NASA Technical Reports Server (NTRS)

1977-01-01

The preliminary design review on the development of two prototype solar heating and hot water systems is presented. The information contained in this report includes system certification, system functional description, system configuration, system specification, system performance and other documents pertaining to the progress and the design of the system. This system, which is intended for use in the normal single-family residence, consists of the following subsystems: collector, storage, control, transport, and Government-furnished Site Data Acquisition.

CALiPER Exploratory Study. Recessed Troffer Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, N. J.; Royer, M. P.; Poplawski, M. E.

This CALiPER study examines the problems and benefits likely to be encountered with LED products intended to replace linear fluorescent lamps. LED dedicated troffers, replacement tubes, and non-tube retrofit kits were evaluated against fluorescent benchmark troffers in a simulated office space for photometric distribution, uniformity of light on the task surface, suitability of light output, flicker, dimming performance, color quality, power quality, safety and certification issues, ease of installation, energy efficiency, and life-cycle cost.

Translations on USSR Science and Technology, Biomedical Sciences, Number 4

DTIC Science & Technology

1977-07-11

Bokser , one of the designers of the radioreflexometer and an assistant professor at the IGMI. "Various laws 34 have been discovered: We react more...reflexometers abroad), specially intended for research on human reaction time, instruments that could be called "human analyzers." O. Ya. Bokser received an...certificates have been granted and eight new instruments have been placed into series production. Of course 0. Ya. Bokser is not the only one that

Post-Baccalaureate Teacher Certification Programs: Strategies for Enhancement, Improvement, and Peaceful Co-existence with Traditional Teacher Certification Programs.

ERIC Educational Resources Information Center

Duhon-Haynes, Gwendolyn; And Others

This paper examines alternative certification programs in terms of entrance requirements, supervision and mentoring, and post-certification professional support. A good alternative program uses rigorous screening processes to ensure the selection of qualified teacher interns; provides high-quality preservice training in methodology, classroom…

29 CFR 825.312 - Fitness-for-duty certification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Fitness-for-duty certification. 825.312 Section 825.312... § 825.312 Fitness-for-duty certification. (a) As a condition of restoring an employee whose FMLA leave... provider to provide the information directly to the employer) in the fitness-for-duty certification process...

29 CFR 825.312 - Fitness-for-duty certification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Fitness-for-duty certification. 825.312 Section 825.312... § 825.312 Fitness-for-duty certification. (a) As a condition of restoring an employee whose FMLA leave... provider to provide the information directly to the employer) in the fitness-for-duty certification process...

29 CFR 825.312 - Fitness-for-duty certification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Fitness-for-duty certification. 825.312 Section 825.312... § 825.312 Fitness-for-duty certification. (a) As a condition of restoring an employee whose FMLA leave... provider to provide the information directly to the employer) in the fitness-for-duty certification process...

29 CFR 825.312 - Fitness-for-duty certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Fitness-for-duty certification. 825.312 Section 825.312... § 825.312 Fitness-for-duty certification. (a) As a condition of restoring an employee whose FMLA leave... provider to provide the information directly to the employer) in the fitness-for-duty certification process...

29 CFR 825.312 - Fitness-for-duty certification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Fitness-for-duty certification. 825.312 Section 825.312... § 825.312 Fitness-for-duty certification. (a) As a condition of restoring an employee whose FMLA leave... provider to provide the information directly to the employer) in the fitness-for-duty certification process...

Lightning Protection System for HE Facilities at LLNL - Certification Template

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clancy, T J; Ong, M M; Brown, C G

2005-12-08

This document is meant as a template to assist in the development of your own lighting certification process. Aside from this introduction and the mock representative name of the building (Building A), this document is nearly identical to a lightning certification report issued by the Engineering Directorate at Lawrence Livermore National Laboratory. At the date of this release, we have certified over 70 HE processing and storage cells at our Site 300 facilities. In Chapters 1 and 2 respectively, we address the need and methods of lightning certification for HE processing and storage facilities at LLNL. We present the preferredmore » method of lightning protection in Chapter 3, as well as the likely building modifications that are needed to comply with this method. In Chapter 4, we present the threat assessment and resulting safe work areas within a cell. After certification, there may be changes to operations during a lightning alert, and this is discussed in Chapter 5. Chapter 6 lists the maintenance requirements for the continuation of lighting certification status. Appendices of this document are meant as an aid in developing your own certification process, and they include a bonding list, an inventory of measurement equipment, surge suppressors in use at LLNL, an Integrated Work and Safety form (IWS), and a template certification sign-off sheet. The lightning certification process involves more that what is spelled out in this document. The first steps involve considerable planning, the securing of funds, and management and explosives safety buy-in. Permits must be obtained, measurement equipment must be assembled and tested, and engineers and technicians must be trained in their use. Cursory building inspections are also recommended, and surge suppression for power systems must be addressed. Upon completion of a certification report and its sign-off by management, additional work is required. Training will be needed in order to educate workers and facility managers of the requirements of lightning certification. Operating procedures will need to be generated and/or modified with additional controls. Engineering controls may also be implemented requiring the modification of cells. Careful planning should bring most of these issues to light, making it clear where this document is helpful and were additional assistance may be necessary.« less

Alluvial diamond resource potential and production capacity assessment of Mali

USGS Publications Warehouse

Chirico, Peter G.; Barthelemy, Francis; Kone, Fatiaga

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. Over 70 countries were included as members of the KPCS at the end of 2007. To prevent trade in "conflict diamonds" while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was (1) to assess the naturally occurring endowment of diamonds in Mali (potential resources) based on geological evidence, previous studies, and recent field data and (2) to assess the diamond-production capacity and measure the intensity of mining activity. Several possible methods can be used to estimate the potential diamond resource. However, because there is generally a lack of sufficient and consistent data recording all diamond mining in Mali and because time to conduct fieldwork and accessibility to the diamond mining areas are limited, four different methodologies were used: the cylindrical calculation of the primary kimberlitic deposits, the surface area methodology, the volume and grade approach, and the content per kilometer approach. Approximately 700,000 carats are estimated to be in the alluvial deposits of the Kenieba region, with 540,000 carats calculated to lie within the concentration grade deposits. Additionally, 580,000 carats are estimated to have been released from the primary kimberlites in the region. Therefore, the total estimated diamond resources in the Kenieba region are thought to be nearly 1,300,000 carats. The Bougouni zones are estimated to have 1,000,000 carats with more than half, 630,000 carats, contained in concentrated deposits. When combined, the Kenieba and Bougouni regions of Mali are estimated to be host to 2,300,000 carats of diamonds.

June 7, 2017 Webinar: Heavy-Duty Highway Trailers Verify Certification Module and Manufacturer Testing Information

EPA Pesticide Factsheets

This EPA webinar provides information on the Verify module for heavy-duty highway trailer manufacturers including introduction, user registration process, submitting certification information, request for certificate, testing and deployment information.

Certification Processes for Safety-Critical and Mission-Critical Aerospace Software

NASA Technical Reports Server (NTRS)

Nelson, Stacy

2003-01-01

This document is a quick reference guide with an overview of the processes required to certify safety-critical and mission-critical flight software at selected NASA centers and the FAA. Researchers and software developers can use this guide to jumpstart their understanding of how to get new or enhanced software onboard an aircraft or spacecraft. The introduction contains aerospace industry definitions of safety and safety-critical software, as well as, the current rationale for certification of safety-critical software. The Standards for Safety-Critical Aerospace Software section lists and describes current standards including NASA standards and RTCA DO-178B. The Mission-Critical versus Safety-Critical software section explains the difference between two important classes of software: safety-critical software involving the potential for loss of life due to software failure and mission-critical software involving the potential for aborting a mission due to software failure. The DO-178B Safety-critical Certification Requirements section describes special processes and methods required to obtain a safety-critical certification for aerospace software flying on vehicles under auspices of the FAA. The final two sections give an overview of the certification process used at Dryden Flight Research Center and the approval process at the Jet Propulsion Lab (JPL).

Planning and tracking chemotherapy production for cancer treatment: a performing and integrated solution.

PubMed

Kergosien, Y; Tournamille, J-F; Laurence, B; Billaut, J-C

2011-09-01

Chemotherapy drugs are intended for the treatment of cancer. The production of such drugs and their administration to the patient is a delicate and expensive operation. The study deals with the acquisition and processing of data regarding the production of intravenous chemotherapy, from the production request (the medical prescription), the production itself (pharmaceutical process), to the delivery in the health care unit, for the administration of the chemotherapy. The goal of this study is to develop a system that can schedule, control and track the chemotherapy preparations and satisfy a certification process of quality management ("ISO 9001 version 2000" standard). The solution proposed in this paper was developed within the framework of a common certification process at the Biopharmaceutical Unit of the Oncology Clinic (UBCO) of the Bretonneau hospital in Tours (France). The system consists of two software programs: a software to insure traceability and a decision making software to plan the production. To simplify the data entry process, some mobile entry points with bar code reader have been deployed. These tools enable an accurate tracking of the production, a security and control for the schedule production phases, and a full traceability of each operation leading to the administration of the chemotherapy drug. The first result is a software that creates the production schedule, allows a real time control of the production process and a full traceability of each step. Computational experiments are based on real data sets, with a comparison of a time period before and after the implementation of this solution. The results show the positive impacts of this software, like the reduction of delayed deliveries, real time generation of production indicators, optimization of the production and a saving of staff time. This intuitive system guarantees a traceability in connection with a high quality system certified ISO 9001-v2000 (with a rapid data entry), an assistant to schedule the production of preparations in a better way, a permanent follow-up and analysis of operations. This project proves the benefits of implementing computer solutions for the traceability and assistance in decision making in the hospital systems. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Towards the certification of the purity of calibrant reference materials for thyroid hormones: a chicken and egg dilemma.

PubMed

Toussaint, B; Schimmel, H; Klein, C L; Wiergowski, M; Emons, H

2007-07-13

The certification of the purity of CRMs intended for calibration, where no other certified material already exists for comparison, raises principle questions on how to determine the purity of a "first" calibrant in the calibration hierarchy. We developed and certified two calibration CRMs for their purity in thyroid hormones taking into consideration inorganic residues, residual solvents and organic impurities detectable by HPLC-UV and HPLC-MS. IRMM-468 was certified for a thyroxine (T(4)) mass fraction of 98.6+/-0.7% and IRMM-469 was certified for a 3,3',5-triiodothyronine (T(3)) mass fraction of 97.1+/-0.7%. The approach we used aims to determine the purity of these two CRMs to the best of our knowledge and taking all scientific aspects properly into account for the estimation of an uncertainty related to the stated purity.

Application for certification for 1979 model year for light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

Application for certification for 1979 model year for light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

Alluvial diamond resource potential and production capacity assessment of Guinea

USGS Publications Warehouse

Chirico, Peter G.; Malpeli, Katherine C.; Van Bockstael, Mark; Diaby, Mamadou; Cissé, Kabinet; Diallo, Thierno Amadou; Sano, Mahmoud

2012-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. The goal of this study was to estimate the alluvial diamond resource endowment and the current production capacity of the alluvial diamond mining sector of Guinea. A modified volume and grade methodology was used to estimate the remaining diamond reserves within Guinea's diamondiferous regions, while the diamond-production capacity of these zones was estimated by inputting the number of artisanal miners, the number of days artisans work per year, and the average grade of the deposits into a formulaic expression. Guinea's resource potential was estimated to be approximately 40 million carats, while the production capacity was estimated to lie within a range of 480,000 to 720,000 carats per year. While preliminary results have been produced by integrating historical documents, five fieldwork campaigns, and remote sensing and GIS analysis, significant data gaps remain. The artisanal mining sector is dynamic and is affected by a variety of internal and external factors. Estimates of the number of artisans and deposit variables, such as grade, vary from site to site and from zone to zone. This report has been developed on the basis of the most detailed information available at this time. However, continued fieldwork and evaluation of artisanally mined deposits would increase the accuracy of the results.

A differential GPS for determining time-space-position information in support of aircraft noise certification

DOT National Transportation Integrated Search

2001-01-22

Federal Aviation Regulation (FAR) Part 36, Noise : Standards: Aircraft Type and Airworthiness : Certification, requires that measured aircraft noise : certification data be corrected to a nominal reference-day : condition. This correction process...

TMA certification review state-of-the-practice review report : 2016

DOT National Transportation Integrated Search

2017-02-01

The 2016 TMA Certification Review State-of-the-Practice Review Report documents the Federal Highway Administrations (FHWA) review of Division Office oversight processes relating to TMA Certification Reviews. This is the sixth review of Division Of...

Accreditation versus Certification: Which?

ERIC Educational Resources Information Center

Totten, Herman L.

1989-01-01

Describes and compares the process used for accreditation of postsecondary programs of education for librarianship, and the existing programs and justification for certification of individual librarians. An argument for the advantages of institutional accreditation over individual certification is presented. (13 references) (CLB)

NASA/Navy Benchmarking Exchange (NNBE). Volume 1. Interim Report. Navy Submarine Program Safety Assurance

NASA Technical Reports Server (NTRS)

2002-01-01

The NASA/Navy Benchmarking Exchange (NNBE) was undertaken to identify practices and procedures and to share lessons learned in the Navy's submarine and NASA's human space flight programs. The NNBE focus is on safety and mission assurance policies, processes, accountability, and control measures. This report is an interim summary of activity conducted through October 2002, and it coincides with completion of the first phase of a two-phase fact-finding effort.In August 2002, a team was formed, co-chaired by senior representatives from the NASA Office of Safety and Mission Assurance and the NAVSEA 92Q Submarine Safety and Quality Assurance Division. The team closely examined the two elements of submarine safety (SUBSAFE) certification: (1) new design/construction (initial certification) and (2) maintenance and modernization (sustaining certification), with a focus on: (1) Management and Organization, (2) Safety Requirements (technical and administrative), (3) Implementation Processes, (4) Compliance Verification Processes, and (5) Certification Processes.

5 CFR 339.306 - Processing medical eligibility determinations on certificates of eligibles.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Processing medical eligibility... Processing medical eligibility determinations on certificates of eligibles. (a) In accordance with the... nonpreference eligible so disqualified has a right to a higher level review of the determination within the...

78 FR 19019 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain Occupations Processed Under H-2A Special Procedures; Correction and Rescission AGENCY: Employment and Training...

9 CFR 95.29 - Certification for certain materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... described in paragraph (b) of this section: (1) Processed animal protein, tankage, offal, and tallow other... derived from ruminants; (3) Processed fats and oils, and derivatives of processed animal protein, tankage... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Certification for certain materials...

9 CFR 95.29 - Certification for certain materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... described in paragraph (b) of this section: (1) Processed animal protein, tankage, offal, and tallow other... derived from ruminants; (3) Processed fats and oils, and derivatives of processed animal protein, tankage... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Certification for certain materials...

9 CFR 95.29 - Certification for certain materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... described in paragraph (b) of this section: (1) Processed animal protein, tankage, offal, and tallow other... derived from ruminants; (3) Processed fats and oils, and derivatives of processed animal protein, tankage... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Certification for certain materials...

9 CFR 95.29 - Certification for certain materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... described in paragraph (b) of this section: (1) Processed animal protein, tankage, offal, and tallow other... derived from ruminants; (3) Processed fats and oils, and derivatives of processed animal protein, tankage... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Certification for certain materials...

40 CFR 68.185 - Certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Certification. 68.185 Section 68.185 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.185 Certification. (a) For Program 1 processes...

Certification of vapor phase hydrogen peroxide sterilization process for spacecraft application

NASA Technical Reports Server (NTRS)

Rohatgi, N.; Schubert, W.; Koukol, R.; Foster, T. L.; Stabekis, P. D.

2002-01-01

This paper describes the selection process and research activities JPL is planning to conduct for certification of hydrogen peroxide as a NASA approved technique for sterilization of various spacecraft parts/components and entire modern spacecraft.

38 CFR 21.4138 - Certifications and release of payments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Administration of Educational Assistance Programs Payments; Educational Assistance Allowance § 21.4138 Certifications and release of... Processing Office of jurisdiction for educational assistance allowance claims processed under 38 U.S.C...

38 CFR 21.4138 - Certifications and release of payments.

Code of Federal Regulations, 2010 CFR

2010-07-01

... VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Administration of Educational Assistance Programs Payments; Educational Assistance Allowance § 21.4138 Certifications and release of... Processing Office of jurisdiction for educational assistance allowance claims processed under 38 U.S.C...

20 CFR 655.161 - Criteria for certification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 655.161 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) Labor Certification Determinations § 655.161 Criteria for...

45 CFR 170.504 - Reconsideration process for requests for ONC-AA status.

Code of Federal Regulations, 2011 CFR

2011-10-01

... status. 170.504 Section 170.504 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent Certification Program for HIT...

45 CFR 170.504 - Reconsideration process for requests for ONC-AA status.

Code of Federal Regulations, 2012 CFR

2012-10-01

... status. 170.504 Section 170.504 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent Certification Program for HIT...

30 CFR 250.272 - If a State objects to the DPP's or DOCD's coastal zone consistency certification, what can I do?

Code of Federal Regulations, 2011 CFR

2011-07-01

... coastal zone consistency certification, what can I do? 250.272 Section 250.272 Mineral Resources BUREAU OF... Process for the Dpp Or Docd § 250.272 If a State objects to the DPP's or DOCD's coastal zone consistency certification, what can I do? If an affected State objects to the coastal zone consistency certification...

78 FR 18364 - Electronic Prescriptions for Controlled Substances Notice of Approved Certification Process

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... DEPARTMENT OF JUSTICE Drug Enforcement Administration [Docket No. DEA-364] Electronic... certification processes for providers of Electronic Prescriptions for Controlled Substances (EPCS) applications... established by Congress. Electronic Prescriptions for Controlled Substances (EPCS) Historically, where federal...

The EVNATURB project: toward an operational platform to assess Blue Green Solutions eco-systemic services in urban environment

NASA Astrophysics Data System (ADS)

Schertzer, D. J. M.; Versini, P. A.; Tchiguirinskaia, I.

2017-12-01

Urban areas are facing an expected increase in intensity and frequency of extreme weather events due to climate change. Combined with unsustainable urbanization, this should exacerbate the environmental consequences related to the water cycle as stormwater management issues, urban heat island increase and biodiversity degradation. Blue Green Solutions (BGS), such as green roofs, vegetated swales or urban ponds, appear to be particularly efficient to reduce the potential impact of new and existing urban developments with respect to these issues. Based on this statement, the French ANR EVNATURB project aims to develop a platform to assess the eco-systemic services provided by BGS and related with the previously mentioned issues. By proposing a multi-disciplinary consortium coupling monitoring, modelling and prospecting, it attempts to tackle several scientific issues currently limiting BGS wide implementation. Based on high resolution monitored sites and modelling tools, space-time variability of the related physical processes will be studied over a wide range of scales (from the material to the district scale), as well as local social-environmental stakes and constraints, to better consider the complexity of the urban environment. The EVNATURB platform developed during the project is intended for every stakeholder involved in urban development projects (planners, architects, engineering and environmental certification companies…) and will help them to implement BGS and evaluate which ones are the most appropriate for a particular project depending on its environmental objectives and constraints, and particularly for obtaining environmental certification.

45 CFR 170.504 - Reconsideration process for requests for ONC-AA status.

Code of Federal Regulations, 2014 CFR

2014-10-01

... status. 170.504 Section 170.504 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.504...

45 CFR 170.504 - Reconsideration process for requests for ONC-AA status.

Code of Federal Regulations, 2013 CFR

2013-10-01

... status. 170.504 Section 170.504 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.504...

78 FR 54863 - Bureau of the Census Geographically Updated Population Certification Program (GUPCP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... Geographically Updated Population Certification Program (GUPCP) AGENCY: Bureau of the Census, Department of... Census (Census Bureau) will resume processing applications for certified decennial census population and... Updated Population Certification Program (GUPCP), was suspended on January 1, 2008, to accommodate the...

40 CFR 1043.41 - EIAPP certification process.

Code of Federal Regulations, 2014 CFR

2014-07-01

... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

40 CFR 1043.41 - EIAPP certification process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

40 CFR 1043.41 - EIAPP certification process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

40 CFR 1043.41 - EIAPP certification process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

40 CFR 1043.41 - EIAPP certification process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... test engine you provide must include appropriate manifolds, aftertreatment devices, electronic control... CONTROLS CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL... application for an EIAPP certificate for each engine family. An EIAPP certificate is valid starting with the...

7 CFR 3434.7 - Duration of certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Duration of certification. 3434.7 Section 3434.7 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HISPANIC-SERVING AGRICULTURAL COLLEGES AND UNIVERSITIES CERTIFICATION PROCESS § 3434.7 Duration of...

7 CFR 3434.7 - Duration of certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Duration of certification. 3434.7 Section 3434.7 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HISPANIC-SERVING AGRICULTURAL COLLEGES AND UNIVERSITIES CERTIFICATION PROCESS § 3434.7 Duration of...

Future practice of graduates of the New Zealand Diploma of Obstetrics and Gynaecology or Certificate in Women's Health.

PubMed

Miller, Dawn; Roberts, Helen; Wilson, Don

2008-09-22

To determine: why Diploma of Obstetrics (DipObs), Diploma of Obstetrics and Medical Gynaecology (DipOMG), or Certificate in Women's Health graduates enrolled; course usefulness; and subsequent practice. 588 University of Otago DipObs, DipOMG, and Certificate in Women's Health graduates (1992-2006) plus Auckland University graduates (1996-2006) were identified. All were doctors. Questionnaires were sent to the 477 with New Zealand medical registration and responses analysed. 334 of the 477 graduates returned completed questionnaires--70% response rate. 73% had worked as GPs, 10% at family planning clinics, 6% at sexual health clinics; and 13% specialised in OandG. 80% enrolled to further knowledge in women's health, 20% in children's health, and 43% to practise GP obstetrics. Most respondents who enrolled in the 1990s intended to practise GP obstetrics but by 2000 most did not. Of 137 New Zealand-based GP respondents who enrolled to practise GP obstetrics, only 5 (3.6%) currently practise intrapartum obstetric care. Twenty-three GPs still practise shared maternity care. Of 220 primary care practitioners, 90% provide early antenatal care. 93% described the course as useful-extremely useful. The DipObs, Dip OMG and Certificate in Women's Health have continued to provide useful postgraduate training in women's health during a changing time in New Zealand pregnancy care. While many graduates of the 1990s enrolled to practise GP obstetrics, most recent graduates did not, and few GPs still practise intrapartum obstetrics.

A needs assessment of community pharmacists for pharmacist specialization in Canada.

PubMed

Jorgenson, Derek; Penm, Jonathan; MacKinnon, Neil; Smith, Jennifer

2017-04-01

Pharmacists are increasingly providing specialized services. However, no process exists for specialist certification in Canada. The aim of this study was to determine the extent to which Canadian community pharmacists support the development of a certification system for specialization. This study utilized a cross-sectional online survey of licensed Canadian pharmacists identified through the member databases of national and regional pharmacy associations. A questionnaire was developed (in French and English) and distributed via email, on behalf of the researchers, by multiple pharmacy organizations in January 2015. Multivariate logistic regressions were conducted to identify which sub-groups of respondents supported the creation of a certification system and which supported mandatory certification. A total of 770 responses were received. Many respondents were practising specialists (30.0%, 205/683) and the most commonly reported specialty areas were diabetes, smoking cessation and geriatrics. Almost 85% (n = 653/770) supported creation of a Canadian certification process and 68.5% (n = 447/653) felt certification should be mandatory. Respondents believed that the primary benefit of a certification system was greater public confidence in pharmacist specialist skills. They also felt that the most important factor in the development of the system is to create national definitions for specialty practice. The main barrier was the lack of reimbursement for specialty services in Canada. The majority of Canadian community pharmacist respondents support the creation of a certification process for pharmacist specialization. Future study is required to confirm this finding in a larger sample and to determine the optimal model and the financial feasibility of a national system in Canada. © 2016 Royal Pharmaceutical Society.

78 FR 38541 - Increase in Fees for Voluntary Federal Dairy Grading and Inspection Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... 10 percent effective February 2014. The fees applicable to European Union Health Certification... European Union Health Certification Program derogation process. These actions will equally affect all...-resident service per European Union (EU) Health Certification Program derogation for somatic cell count and...

A Parallel Universe: Certification in the Information Technology Guild.

ERIC Educational Resources Information Center

Adelman, Clifford

2000-01-01

Discusses the growing importance of transnational, competency-based training in information technology and considers implications for traditional institutions of higher education. Considers the awarding of certificates rather than degrees; the types of providers offering training; the role of testing companies in the certification process; and the…

9 CFR 351.14 - Processes to be supervised; extent of examinations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT... in the preparation of certified technical animal fats at any certified plant shall be subject to supervision by an inspector. Certified plants shall not prepare any technical animal fat for certification...

9 CFR 351.14 - Processes to be supervised; extent of examinations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT... in the preparation of certified technical animal fats at any certified plant shall be subject to supervision by an inspector. Certified plants shall not prepare any technical animal fat for certification...

9 CFR 351.14 - Processes to be supervised; extent of examinations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT... in the preparation of certified technical animal fats at any certified plant shall be subject to supervision by an inspector. Certified plants shall not prepare any technical animal fat for certification...

78 FR 58160 - Certification Process for State Capital Counsel System

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... make such independent assessments in the context of making certification decisions under chapter 154... decisions concerning the objectives of representation,'' ABA Model Rule 1.2(a), making it difficult to... certification procedures. The Attorney General determined that chapter 154 gave him greater discretion in making...

7 CFR 52.54 - Debarment of service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... inspection report or any inspection certificate, or appeal inspection certificate issued under the... of grade or words of similar import in the labeling or advertising of any processed product; (v) The... advertising material on, or in conjunction with, packaged honey that bears any official certificate of quality...

Analysis of Operational Hazards and Safety Requirements for Traffic Aware Strategic Aircrew Requests (TASAR)

NASA Technical Reports Server (NTRS)

Koczo, Stefan, Jr.

2013-01-01

Safety analyses of the Traffic Aware Strategic Aircrew Requests (TASAR) Electronic Flight Bag (EFB) application are provided to establish its Failure Effects Classification which affects certification and operational approval requirements. TASAR was developed by NASA Langley Research Center to offer flight path improvement opportunities to the pilot during flight for operational benefits (e.g., reduced fuel, flight time). TASAR, using own-ship and network-enabled information concerning the flight and its environment, including weather and Air Traffic Control (ATC) system constraints, provides recommended improvements to the flight trajectory that the pilot can choose to request via Change Requests to ATC for revised clearance. This study reviews the Change Request process of requesting updates to the current clearance, examines the intended function of TASAR, and utilizes two safety assessment methods to establish the Failure Effects Classification of TASAR. Considerable attention has been given in this report to the identification of operational hazards potentially associated with TASAR.

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

15 CFR 325.8 - Expediting the certification process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Expediting the certification process. 325.8 Section 325.8 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS EXPORT TRADE...

Improving the continued airworthiness of civil aircraft : a strategy for the FAA's Aircraft Certification Service

DOT National Transportation Integrated Search

1998-01-01

The National Research Council (NRC) was asked to conduct an independent assessment of the safety management process used by the Aircraft Certification Service of the Federal Aviation Administration (FAA) to define how the current process might be imp...

20 CFR 655.1 - Purpose and scope of subpart A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... governing the labor certification process for the temporary employment of nonimmigrant foreign workers in...

20 CFR 655.101 - Authority of the Office of Foreign Labor Certification (OFLC) Administrator.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Certification (OFLC) Administrator. 655.101 Section 655.101 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) § 655.101...

20 CFR 655.172 - Withdrawal of job order and application for temporary employment certification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... temporary employment certification. 655.172 Section 655.172 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) Post...

27 CFR 41.195 - Trade name certificate.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Trade name certificate. 41.195 Section 41.195 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.195 Trade name certificate. Every person, before...

27 CFR 41.195 - Trade name certificate.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Trade name certificate. 41.195 Section 41.195 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.195 Trade name certificate. Every person, before...

27 CFR 41.195 - Trade name certificate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Trade name certificate. 41.195 Section 41.195 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.195 Trade name certificate. Every person, before...

27 CFR 41.195 - Trade name certificate.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Trade name certificate. 41.195 Section 41.195 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.195 Trade name certificate. Every person that...

27 CFR 41.195 - Trade name certificate.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Trade name certificate. 41.195 Section 41.195 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU..., AND PROCESSED TOBACCO Tobacco Products Importers § 41.195 Trade name certificate. Every person, before...

Teacher Certification: The Problem in the Pacific Northwest.

ERIC Educational Resources Information Center

Leonard, Leo D.

1985-01-01

Teacher certification procedures in the Pacific Northwest are used to illustrate the kinds of problems facing the nation in terms of teacher certification and program accreditation. Proposals for change include: cooperation between public schools and universities; five year programs; and use of research to study the teacher education process. (DF)

9 CFR 205.101 - Certification-request and processing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... an introductory explanation of how the system will operate; (2) Identify the information which will... the system is created and operated, and the system operator is designated; (ii) All regulations, rules... certification of a system, a written request for certification must be filed together with such documents as...

9 CFR 205.101 - Certification-request and processing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... an introductory explanation of how the system will operate; (2) Identify the information which will... the system is created and operated, and the system operator is designated; (ii) All regulations, rules... certification of a system, a written request for certification must be filed together with such documents as...

Building Alternative Agri-Food Networks: Certification, Embeddedness and Agri-Environmental Governance

ERIC Educational Resources Information Center

Higgins, Vaughan; Dibden, Jacqui; Cocklin, Chris

2008-01-01

This paper examines the role of certification in alternative agri-food networks (AAFNs), which are "in the process" of building markets for their produce outside conventional supply chains. Drawing upon recent writing on "embeddedness", we argue that certification provides an important focus for exploring the relationship and…

Subspecialty Certification by the American Board of Psychiatry and Neurology

ERIC Educational Resources Information Center

Juul, Dorthea; Scheiber, Stephen C.; Kramer, Thomas A. M.

2004-01-01

Objective: The authors describe the approval processes for subspecialties and the mechanisms for certification and recertification and review the status of training programs and numbers of diplomates with subspecialty certification. Methods: Published information and relevant data bases were reviewed. To date, 5,327 child and adolescent…

Support for infants and young people with sight loss: a qualitative study of sight impairment certification and referral to education and social care services

PubMed Central

Boyce, Tammy; Dahlmann-Noor, Annegret; Bowman, Richard; Keil, Sue

2015-01-01

Objectives To examine the experience of infants, children and their parents, the role of ophthalmologists and other health, social care and education professionals in the certification and registration processes and examine the relationship between certification and referrals and pathways to support. Design Qualitative study. Setting Telephone interviews with health and, social care professionals, qualified teachers of children and young people with vision impairment (QTVIs) and parents of infants/children in England. Participants 52 health, social care and education professionals who are part of the certification or registration process. 26 parents of infants and children with vision impairment. Results Referrals to education do not require a Certificate of Vision Impairment (CVI); however, the majority of parents received support from education and social services only after an offer of the CVI, which was often dependent on having a formal diagnosis. Parents stated they wanted support sooner, particularly parents of children with additional complex needs who experienced longer delays. Areas with multidisciplinary teams and support roles such as eye clinic liaison officers (ECLOs) appeared to have more reliable referral pathways. Conclusions For infants and children with vision impairment, there should be a consistent mechanism for triggering education and social care support even with uncertainty about diagnosis and/or prognosis. All professionals involved in the certification and registration processes (ophthalmologists, optometrists, ECLOs, orthoptists, social workers, QTVIs) can better communicate the value and benefits of certification and registration. PMID:26685033

Certification of Professional School Personnel in Manitoba: A Handbook for Graduates of Manitoba's Teacher Training Institutions = Delivrance des brevets au personnel professionnel du Manitoba: Guide a l'attention des diplomes des etablissements de formation d'enseignants du Manitoba.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide, with alternating pages of text in English and French, provides information about the process of obtaining teacher certification in Manitoba (Canada). The guide discusses professional and vocational certification; application procedures; teaching prior to certification; salary classification; salary reclassification; official statements…

50 CFR 260.97 - Conditions for providing fishery products inspection service at official establishments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CERTIFICATION Inspection and Certification of Establishments and Fishery Products for Human Consumption... control systems and cooperation. The inspection effort requirement may be reevaluated when the contracting...; or (2) For production errors, such as processing temperatures, length of process, or misbranding of...

50 CFR 260.97 - Conditions for providing fishery products inspection service at official establishments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CERTIFICATION Inspection and Certification of Establishments and Fishery Products for Human Consumption... control systems and cooperation. The inspection effort requirement may be reevaluated when the contracting...; or (2) For production errors, such as processing temperatures, length of process, or misbranding of...

20 CFR 655.5 - Purpose and scope of subpart A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... certification process for the temporary employment of nonimmigrant foreign workers in the U.S. in occupations...

77 FR 45688 - Electronic Prescriptions for Controlled Substances Notice of Approved Certification Process

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... Comprehensive Drug Abuse Prevention and Control Act of 1970, often referred to as the Controlled Substances Act... substances, particularly Schedule II controlled substances, which have a significant potential for abuse... Prescriptions for Controlled Substances Notice of Approved Certification Process AGENCY: Drug Enforcement...

Saturn S-2 quality assurance techniques, critical process control. Volume 7: Metallic materials

NASA Technical Reports Server (NTRS)

Ross, W. D., Jr.

1970-01-01

The special skills developed during the Saturn S-2 Program are documented to enable qualified personnel to carry out efficient operations in future S-2 production. Skills covered include: acceptance testing of fusion-welding equipment, weld operators and inspector certification, machine certification, preweld operations, and repair weld certification.

27 CFR 40.496 - Trade name certificate.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Trade name certificate. 40.496 Section 40.496 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 40.496 Trade name certificate. Every person that files an application for a permit as a...

27 CFR 41.236 - Trade name certificate.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Trade name certificate. 41.236 Section 41.236 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 41.236 Trade name certificate. Every person that files an application for a permit as an...

27 CFR 41.236 - Trade name certificate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Trade name certificate. 41.236 Section 41.236 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 41.236 Trade name certificate. Every person that files an application for a permit as an...

27 CFR 41.236 - Trade name certificate.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Trade name certificate. 41.236 Section 41.236 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 41.236 Trade name certificate. Every person that files an application for a permit as an...

27 CFR 41.236 - Trade name certificate.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Trade name certificate. 41.236 Section 41.236 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 41.236 Trade name certificate. Every person that files an application for a permit as an...

27 CFR 40.496 - Trade name certificate.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Trade name certificate. 40.496 Section 40.496 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 40.496 Trade name certificate. Every person that files an application for a permit as a...

27 CFR 40.496 - Trade name certificate.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Trade name certificate. 40.496 Section 40.496 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 40.496 Trade name certificate. Every person that files an application for a permit as a...

27 CFR 41.236 - Trade name certificate.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Trade name certificate. 41.236 Section 41.236 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 41.236 Trade name certificate. Every person that files an application for a permit as an...

27 CFR 40.496 - Trade name certificate.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Trade name certificate. 40.496 Section 40.496 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 40.496 Trade name certificate. Every person that files an application for a permit as a...

27 CFR 40.496 - Trade name certificate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Trade name certificate. 40.496 Section 40.496 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Processed Tobacco § 40.496 Trade name certificate. Every person that files an application for a permit as a...

49 CFR 240.115 - Criteria for consideration of prior safety conduct as a motor vehicle operator.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CERTIFICATION OF LOCOMOTIVE ENGINEERS Component Elements of the Certification Process § 240.115 Criteria for... occurred more than 36 months before the month in which the railroad is making its certification decision and shall only consider information concerning the following types of motor vehicle incidents: (1) A...

Certification as a SOTL Process: Some Steps along the Way

ERIC Educational Resources Information Center

McCarthy, Marian

2009-01-01

Certificated Courses in Teaching and Learning in Higher Education at University College Cork (UCC), Ireland, provide opportunities for faculty to develop a culture of Scholarship of Teaching and Learning (SoTL). The Teaching and Learning Centre runs a Certificate, Diploma and Master's Programme which is grounded in a SoTL philosophy. Central to…

Internists' Views of Maintenance of Certification: A Stages-of-Change Perspective

ERIC Educational Resources Information Center

Arnold, Gerald K.; Hess, Brian J.; Lipner, Rebecca S.

2013-01-01

Introduction: Board certification has evolved from a "point-in-time" event to a process of periodic learning and reevaluation of medical competence through maintenance of certification (MOC). To better understand MOC participation, the transtheoretical model (TTM) was used to describe physicians' perceptions of MOC as a sequence of…

20 CFR 655.101 - Authority of the Office of Foreign Labor Certification (OFLC) Administrator.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Authority of the Office of Foreign Labor Certification (OFLC) Administrator. 655.101 Section 655.101 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary...

77 FR 12882 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

78 FR 15741 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2013 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

77 FR 13635 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

76 FR 11286 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2011 Adverse Effect Wage Rates, Allowable Charges for Agricultural Workers' Meals, and Maximum Travel Subsistence Reimbursement AGENCY...

20 CFR 655.23 - Receipt and processing of applications.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Processing. The CO will review complete applications for an absence of errors that would prevent certification and for compliance with the criteria for certification. The CO will make a determination to... complied with all requirements of the program. (c) Request for further information. (1) If the CO...

20 CFR 655.23 - Receipt and processing of applications.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Processing. The CO will review complete applications for an absence of errors that would prevent certification and for compliance with the criteria for certification. The CO will make a determination to... complied with all requirements of the program. (c) Request for further information. (1) If the CO...

National Board Certified Teachers in Pennsylvania: A Study of Motivation and Persistence

ERIC Educational Resources Information Center

Starnes, Ronald Jay

2013-01-01

This descriptive study identifies: 1) the factors which motivated Pennsylvania teachers to begin the National Board Certification process; 2) the factors of persistence which led teachers to successful achievement of National Board Certification and; 3) the personal transformation which took place in the process. Quantitative and qualitative…

Electronic Certification of Death in Slovenia - System Considerations and Development Opportunities.

PubMed

Stanimirovic, Dalibor

2016-01-01

Accurate and consistent death certification facilitates morbidity and mortality surveillance, and consequently supports evidence-informed health policies. The paper initially explores the current death certification practice in Slovenia, and identifies related deficiencies and system inconsistencies. Finally, the paper outlines a conceptualization of ICT-based model of death certification including renovation of business processes and organizational changes. The research is based on focus group methodology. Structured discussions were conducted with 29 experts from cross-sectional areas related to death certification. Research results imply that effective ICT-based transformation of the existing death certification model should involve a redefinition of functions and relationships between the main actors, as well as a reconfiguration of the technological, organizational, and regulatory elements in the field. The paper provides an insight into the complexities of the death certification and may provide the groundwork for ICT-based transformation of the death certification model in Slovenia.

Acoustical case studies of three green buildings

NASA Astrophysics Data System (ADS)

Siebein, Gary; Lilkendey, Robert; Skorski, Stephen

2005-04-01

Case studies of 3 green buildings with LEED certifications that required extensive acoustical retrofit work to become satisfactory work environments for their intended user groups will be used to define areas where green building design concepts and acoustical design concepts require reconciliation. Case study 1 is an office and conference center for a city environmental education agency. Large open spaces intended to collect daylight through clerestory windows provided large, reverberant volumes with few acoustic finishes that rendered them unsuitable as open office space and a conference room/auditorium. Case Study 2 describes one of the first gold LEED buildings in the southeast whose primary design concepts were so narrowly focused on thermal and lighting issues that they often worked directly against basic acoustical requirements resulting in sound levels of NC 50-55 in classrooms and faculty offices, crosstalk between classrooms and poor room acoustics. Case study 3 is an environmental education and conference center with open public areas, very high ceilings, and all reflective surfaces made from wood and other environmentally friendly materials that result in excessive loudness when the building is used by the numbers of people which it was intended to serve.

ARC+(Registered Trademark) and ARC PC Welding Simulators: Teach Welders with Virtual Interactive 3D Technologies

NASA Technical Reports Server (NTRS)

Choquet, Claude

2011-01-01

123 Certification Inc., a Montreal based company, has developed an innovative hands-on welding simulator solution to help build the welding workforce in the most simple way. The solution lies in virtual reality technology, which has been fully tested since the early 90's. President and founder of 123 Certification Inc., Mr. Claude Choquet Ing. Msc. IWE. acts as a bridge between the welding and the programming world. Working in these fields for more than 20 years. he has filed 12 patents world-wide for a gesture control platform with leading edge hardware related to simulation. In the summer of 2006. Mr Choquet was proud to be invited to the annual IIW International Weld ing Congress in Quebec City to launch the ARC+ welding simulator. A 100% virtual reality system and web based training center was developed to simulate multi process. multi-materiaL multi-position and multi pass welding. The simulator is intended to train welding students and apprentices in schools or industries. The welding simulator is composed of a real welding e[eetrode holder (SMAW-GTAW) and gun (GMAW-FCAW). a head mounted display (HMD), a 6 degrees of freedom tracking system for interaction between the user's hands and head. as well as external audio speakers. Both guns and HMD are interacting online and simultaneously. The welding simulation is based on the law of physics and empirical results from detailed analysis of a series of welding tests based on industrial applications tested over the last 20 years. The simulation runs in real-time, using a local logic network to determine the quality and shape of the created weld. These results are based on the orientation distance. and speed of the welding torch and depth of penetration. The welding process and resulting weld bc.1d are displayed in a virtual environment with screenplay interactive training modules. For review. weld quality and recorded process values can be displayed and diagnosed after welding. To help in the le.tming process, a learning curve for each student and each Virtual Welding Class'" can be plotted, for an instructor's review or a required third party evaluation.

Risk perception and motivation to quit smoking: a partial test of the Health Action Process Approach.

PubMed

Williams, Rebecca J; Herzog, Thaddeus A; Simmons, Vani N

2011-07-01

The Health Action Process Approach (HAPA) posits a distinction between pre-intentional motivation processes and a post-intentional volition process that leads to the actual behavior change. For smoking cessation, the HAPA predicts that increased risk perceptions would foster a decision to quit smoking. From a cross-sectional perspective, the HAPA predicts that those who do not intend to quit (non-intenders) should have lower risk perceptions than those who do intend to quit (intenders). Adult smokers participated in a cross-sectional survey. Multiple measures of motivation to quit smoking and risk perceptions for smoking were assessed. ANOVA and contrast analysis were employed for data analysis. The results were generally supportive of the HAPA. Non-intenders had systematically lower risk perceptions compared to intenders. Most of these findings were statistically significant. The results demonstrated that risk perceptions distinguish non-intenders from intenders. These results suggest that smokers low in motivation to quit could benefit from information and reminders about the serious health problems caused by smoking. Copyright © 2011 Elsevier Ltd. All rights reserved.

Synthesis from Design Requirements of a Hybrid System for Transport Aircraft Longitudinal Control. Volume 1

NASA Technical Reports Server (NTRS)

Hynes, Charles S.; Hardy, Gordon H.; Sherry, Lance

2007-01-01

Volume I of this report presents a new method for synthesizing hybrid systems directly from design requirements, and applies the method to design of a hybrid system for longitudinal control of transport aircraft. The resulting system satisfies general requirement for safety and effectiveness specified a priori, enabling formal validation to be achieved. Volume II contains seven appendices intended to make the report accessible to readers with backgrounds in human factors, fli ght dynamics and control. and formal logic. Major design goals are (1) system desi g n integrity based on proof of correctness at the design level, (2), significant simplification and cost reduction in system development and certification, and (3) improved operational efficiency, with significant alleviation of human-factors problems encountered by pilots in current transport aircraft. This report provides for the first time a firm technical basis for criteria governing design and certification of avionic systems for transport aircraft. It should be of primary interest to designers of next-generation avionic systems.

Synthesis from Design Requirements of a Hybrid System for Transport Aircraft Longitudinal Control. Volume 2

NASA Technical Reports Server (NTRS)

Hynes, Charles S.; Hardy, Gordon H.; Sherry, Lance

2007-01-01

Volume I of this report presents a new method for synthesizing hybrid systems directly from desi gn requirements, and applies the method to design of a hybrid system for longitudinal control of transport aircraft. The resulting system satisfies general requirement for safety and effectiveness specified a priori, enabling formal validation to be achieved. Volume II contains seven appendices intended to make the report accessible to readers with backgrounds in human factors, flight dynamics and control, and formal logic. Major design goals are (1) system design integrity based on proof of correctness at the design level, (2) significant simplification and cost reduction in system development and certification, and (3) improved operational efficiency, with significant alleviation of human-factors problems encountered by pilots in current transport aircraft. This report provides for the first time a firm technical basis for criteria governing design and certification of avionic systems for transport aircraft. It should be of primary interest to designers of next-generation avionic systems.

Perspectives on Teacher Quality: Bilingual Education and ESL Teacher Certification, Test-Taking Experiences, and Instructional Practices

ERIC Educational Resources Information Center

Lemberger, Nancy; Reyes-Carrasquillo, Angela

2011-01-01

This descriptive exploratory study looked at the certification process, test-taking experiences, and instructional practices of a group of graduate bilingual education (BE) and English-as-a-Second-Language (ESL) teachers to understand why some had problems passing teacher certification tests after completing their degrees. The study surveyed 63 BE…

Middle Level Teacher Certification in South Carolina: A Case Study in Educational Policy Development

ERIC Educational Resources Information Center

Virtue, David C.

2007-01-01

South Carolina made a significant step forward in middle level education reform by enacting middle level teacher certification in 2001. This qualitative case study documents the process through which the state legislation developed, with a particular focus on how middle level teacher certification arrived and remained on the public policy agenda…

Graduating STEM Competent and Confident Teachers: The Creation of a STEM Certificate for Elementary Education Majors

ERIC Educational Resources Information Center

Murphy, Tony P.; Mancini-Samuelson, Gina J.

2012-01-01

A collaborative of STEM (science, technology, engineering, and mathematics) and education faculty developed a STEM certificate aimed at elementary education majors. A four-phase process model was used to create and evaluate courses. The certificate is comprised of three interdisciplinary, team-taught, lab-based courses: Environmental Biology,…

46 CFR 167.60-5 - Period of time for which valid.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SCHOOL SHIPS Certificates of Inspection § 167.60-5 Period of time for which valid. A certificate of inspection for any period less than one year shall not be issued, but nothing herein shall be construed as preventing the revocation or suspension of a certificate of inspection in case such process is authorized by...

A Research Guide on National Board Certification[R] of Teachers

ERIC Educational Resources Information Center

National Board for Professional Teaching Standards, 2007

2007-01-01

The National Board for Professional Teaching Standards[R] (NBPTS) has always welcomed scrutiny of the National Board Certification[R] process and the impact that National Board Certified Teachers[R] (NBCTs) have on teaching and learning. As a result, in the 20 years since NBPTS was founded, National Board Certification has become one of the most…

The Political Economy of Alternative Trade: Social and Environmental Certification in the South African Wine Industry

ERIC Educational Resources Information Center

McEwan, Cheryl; Bek, David

2009-01-01

Despite recent critical analyses of the nature and impacts of social and environmental certification, the increasingly complex landscape of voluntary, industry and third-party codes and certification processes that have emerged in specific sectors is poorly understood. In particular, little is known about the potential threats posed by an…

A Primer for Accounting Certification: Complete Analysis of the Process with Listing of Sources

ERIC Educational Resources Information Center

Boyd, David T.; Boyd, Sanithia C.; Berry, Priscilla

2009-01-01

As a result of globalization and the growth and complexity of both domestic and international bodies requiring accountants, the need for highly sophisticated training and specific certification is mandatory. Students seeking career positions in the field of accounting are amazingly left without the easy access to certification that one might think…

Space outside the market: implications of NTFP certification for subsistence use (US)

Treesearch

Marla R. Emery

2002-01-01

Non-timber forest product (NTFP) certification is a market mechanism that is advanced to attain the dual goals of protecting global forests and promoting economic development (Nepstad and Schwartzman, 1992; Pierce, 1999; Viana et al, 1996). Certification criteria and indicators emphasize the rationalization and control of each step of the NTFP process from forest to...

Advantages of multigrid methods for certifying the accuracy of PDE modeling

NASA Technical Reports Server (NTRS)

Forester, C. K.

1981-01-01

Numerical techniques for assessing and certifying the accuracy of the modeling of partial differential equations (PDE) to the user's specifications are analyzed. Examples of the certification process with conventional techniques are summarized for the three dimensional steady state full potential and the two dimensional steady Navier-Stokes equations using fixed grid methods (FG). The advantages of the Full Approximation Storage (FAS) scheme of the multigrid technique of A. Brandt compared with the conventional certification process of modeling PDE are illustrated in one dimension with the transformed potential equation. Inferences are drawn for how MG will improve the certification process of the numerical modeling of two and three dimensional PDE systems. Elements of the error assessment process that are common to FG and MG are analyzed.

The National Board Certification Portfolio Process and Its Influence on Teacher Reflection

ERIC Educational Resources Information Center

Palmer, Jennifer L.

2012-01-01

This study examined the types of teacher reflections and the changes in reflective levels as 15 candidates for National Board Certification worked through the portfolio process. This study also examined how the portfolio requirements and mentoring from candidate support providers helped teachers deepen their levels of reflection. Study findings…

Volpe Aircraft Noise Certification DGPS Validation/Audit General Information, Data Submittal Guidelines, and Process Details; Letter Report V324-FB48B3-LR5

DOT National Transportation Integrated Search

2018-01-09

As required by Federal Aviation Administration Order 8110.4C, Type Certification Process, the Volpe Center Acoustics Facility (Volpe), in support of the Federal Aviation Administration Office of Environment and Energy (AEE), has completed valid...

Memorandum about Regional Certifications Made During the Resource Conservation and Recovery Act (RCRA) Subtitle C State Program Revision Authorization Process

EPA Pesticide Factsheets

During last year’s RCRA Senior Policy Managers Meeting in Kansas City, there was a discussion regarding the certifications that are made by the Regions during the State Authorization Revision process. The result of this discussion was a general agreement.

78 FR 1260 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain... Agriculture (USDA) farm production region that includes another State either with its own wage rate finding or...

78 FR 1259 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2013 Adverse Effect Wage Rates AGENCY... Department of Agriculture (USDA). 20 CFR 655.120(c) requires that the Administrator of the Office of Foreign...

76 FR 79711 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Adverse Effect Wage Rates AGENCY... Department of Agriculture (USDA). 20 CFR 655.120(c) requires the Administrator of the Office of Foreign Labor...

Volpe Aircraft Noise Certification Software & Methodology Validation/Audit General Information, Data Submittal Guidelines, and Process Details; Letter Report V324-FB48B3-LR2

DOT National Transportation Integrated Search

2017-08-18

As required by Federal Aviation Administration (FAA) Order 8110.4C: Type Certification Process (most recently revised as Change 5, 20 December, 2011), the Volpe Center Acoustics Facility (Volpe), in support of the FAA Office of Environmen...

48 CFR 301.607-76 - FAC-P/PM application process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false FAC-P/PM application... 301.607-76 FAC-P/PM application process. The P/PM Handbook contains application procedures and forms...; recertification; and certification waiver. Applicants for HHS FAC-P/PM certification actions shall comply with the...

48 CFR 301.607-76 - FAC-P/PM application process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false FAC-P/PM application... 301.607-76 FAC-P/PM application process. The P/PM Handbook contains application procedures and forms...; recertification; and certification waiver. Applicants for HHS FAC-P/PM certification actions shall comply with the...

48 CFR 301.607-76 - FAC-P/PM application process.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false FAC-P/PM application... 301.607-76 FAC-P/PM application process. The P/PM Handbook contains application procedures and forms...; recertification; and certification waiver. Applicants for HHS FAC-P/PM certification actions shall comply with the...

48 CFR 301.607-76 - FAC-P/PM application process.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false FAC-P/PM application... 301.607-76 FAC-P/PM application process. The P/PM Handbook contains application procedures and forms...; recertification; and certification waiver. Applicants for HHS FAC-P/PM certification actions shall comply with the...

48 CFR 301.607-76 - FAC-P/PM application process.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false FAC-P/PM application... 301.607-76 FAC-P/PM application process. The P/PM Handbook contains application procedures and forms...; recertification; and certification waiver. Applicants for HHS FAC-P/PM certification actions shall comply with the...

Software Certification - Coding, Code, and Coders

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

The road to JCAHO disease-specific care certification: a step-by-step process log.

PubMed

Morrison, Kathy

2005-01-01

In 2002, the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) implemented Disease-Specific Care (DSC) certification. This is a voluntary program in which organizations have their disease management program evaluated by this regulatory agency. Some of the DSC categories are stroke, heart failure, acute MI, diabetes, and pneumonia. The criteria for any disease management program certification are: compliance with consensus-based national standards, effective use of established clinical practice guidelines to manage and optimize care, and an organized approach to performance measurement and improvement activities. Successful accomplishment of DSC certification defines organizations as Centers of Excellence in management of that particular disease. This article will review general guidelines for DSC certification with an emphasis on Primary Stroke Center certification.

20 CFR 655.32 - Labor certification determinations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United...

Safe to Fly: Certifying COTS Hardware for Spaceflight

NASA Technical Reports Server (NTRS)

Fichuk, Jessica L.

2011-01-01

Providing hardware for the astronauts to use on board the Space Shuttle or International Space Station (ISS) involves a certification process that entails evaluating hardware safety, weighing risks, providing mitigation, and verifying requirements. Upon completion of this certification process, the hardware is deemed safe to fly. This process from start to finish can be completed as quickly as 1 week or can take several years in length depending on the complexity of the hardware and whether the item is a unique custom design. One area of cost and schedule savings that NASA implements is buying Commercial Off the Shelf (COTS) hardware and certifying it for human spaceflight as safe to fly. By utilizing commercial hardware, NASA saves time not having to develop, design and build the hardware from scratch, as well as a timesaving in the certification process. By utilizing COTS hardware, the current detailed certification process can be simplified which results in schedule savings. Cost savings is another important benefit of flying COTS hardware. Procuring COTS hardware for space use can be more economical than custom building the hardware. This paper will investigate the cost savings associated with certifying COTS hardware to NASA s standards rather than performing a custom build.

Development of a framework for international certification by OIE of diagnostic tests validated as fit for purpose.

PubMed

Wright, P; Edwards, S; Diallo, A; Jacobson, R

2006-01-01

Historically, the OIE has focused on test methods applicable to trade and the international movement of animals and animal products. With its expanding role as the World Organisation for Animal Health, the OIE has recognised the need to evaluate test methods relative to specific diagnostic applications other than trade. In collaboration with its international partners, the OIE solicited input from experts through consultants' meetings on the development of guidelines for validation and certification of diagnostic assays for infectious animal diseases. Recommendations from the first meeting were formally adopted and have subsequently been acted upon by the OIE. A validation template has been developed that specifically requires a test to be fit or suited for its intended purpose (e.g. as a screening or a confirmatory test). This is a key criterion for validation. The template incorporates four distinct stages of validation, each of which has bearing on the evaluation of fitness for purpose. The OIE has just recently created a registry for diagnostic tests that fulfil these validation requirements. Assay developers are invited to submit validation dossiers to the OIE for evaluation by a panel of experts. Recognising that validation is an incremental process, tests methods achieving at least the first stages of validation may be provisionally accepted. To provide additional confidence in assay performance, the OIE, through its network of Reference Laboratories, has embarked on the development of evaluation panels. These panels would contain specially selected test samples that would assist in verifying fitness for purpose.

Development of a framework for international certification by the OIE of diagnostic tests validated as fit for purpose.

PubMed

Wright, P; Edwards, S; Diallo, A; Jacobson, R

2007-01-01

Historically, the OIE has focussed on test methods applicable to trade and the international movement of animals and animal products. With its expanding role as the World Organisation for Animal Health, the OIE has recognised the need to evaluate test methods relative to specific diagnostic applications other than trade. In collaboration with its international partners, the OIE solicited input from experts through consultants meetings on the development of guidelines for validation and certification of diagnostic assays for infectious animal diseases. Recommendations from the first meeting were formally adopted and have subsequently been acted upon by the OIE. A validation template has been developed that specifically requires a test to be fit or suited for its intended purpose (e.g. as a screening or a confirmatory test). This is a key criterion for validation. The template incorporates four distinct stages of validation, each of which has bearing on the evaluation of fitness for purpose. The OIE has just recently created a registry for diagnostic tests that fulfil these validation requirements. Assay developers are invited to submit validation dossiers to the OIE for evaluation by a panel of experts. Recognising that validation is an incremental process, tests methods achieving at least the first stages of validation may be provisionally accepted. To provide additional confidence in assay performance, the OIE, through its network of Reference Laboratories, has embarked on the development of evaluation panels. These panels would contain specially selected test samples that would assist in verifying fitness for purpose.

31 CFR 363.143 - What happens if an ACH payment used to purchase a certificate of indebtedness is later reversed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... processed security transactions, including securities that were purchased as gifts and securities that have... to purchase a certificate of indebtedness is later reversed? 363.143 Section 363.143 Money and... Indebtedness § 363.143 What happens if an ACH payment used to purchase a certificate of indebtedness is later...

Dynamic (Vibration) Testing: Design-Certification of Aerospace System

NASA Technical Reports Server (NTRS)

Aggarwal, Pravin K.

2010-01-01

Various types of dynamic testing of structures for certification purposes are described, including vibration, shock and acoustic testing. Modal testing is discussed as it frequently complements dynamic testing and is part of the structural verification/validation process leading up to design certification. Examples of dynamic and modal testing are presented as well as the common practices, procedures and standards employed.

Physicians' messages in problematic sickness certification: a narrative analysis of case reports

PubMed Central

2011-01-01

Background Many physicians find sickness certification tasks problematic. There is some knowledge about situations that are experienced as problematic, whereas less is understood about how physicians respond to the problems they face. One way to acquire such knowledge is to consider "reflection-in-action", aspects of which are expressed in the physician's interpretation of the patient's story. The aim of this study was to gain knowledge about the meaning content of case reports about problematic sickness certification. Specifically, we looked for possible messages to the colleagues intended to read the reports. Methods A narrative approach was used to analyse reports about problematic sickness certification cases that had been written by GPs and occupational health service physicians as part of a sickness insurance course. The analysis included elements from both thematic and structural analysis. Nineteen case reports were used in the actual analysis and 25 in the validation of the results. Main narrative qualities and structural features of the written case reports were explored. Results Five types of messages were identified in the case reports, here classified as "a call for help", "a call for understanding", "hidden worries", "in my opinion", and "appearing neutral". In the reports, the physicians tried to achieve neutrality in their writing, and the patients' stories tended to be interpreted within a traditional biomedical framework. In some cases there was an open request for help, in others it was not obvious that the physician had any problems. Overall, the messages were about having problems as such, rather than the specific features of the problems. Conclusions The case reports clearly demonstrated different ways of writing about problems that arise during sickness certification, from being neutral and not mentioning the problems to being emotionally involved and asking for help. The general character of the messages suggests that they are also relevant for case reports in problematic areas other than sickness certification. If pertinent relationships can be found between reflection-in-practice and the narrative writing about practice, they will provide an approach to further research concerning consultations perceived as problematic and also to medical education. PMID:21481257

Summary of Part 75 Administrative Processes: Table 1

EPA Pesticide Factsheets

Learn how to submit your initial certification, recertification, monitoring plans, routine quality assurance tests, diagnostic tests and DAHS verifications, low mass emissions units and other notification requirements. Table 1, initial certification.

20 CFR 655.34 - Validity of temporary labor certifications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United...

77 FR 16157 - Changes to the Labor Certification Process for the Temporary Non-Agricultural Employment of H-2B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

... DEPARTMENT OF LABOR Employment and Training Administration 20 CFR Part 655 RIN 1205-AB58 Changes to the Labor Certification Process for the Temporary Non- Agricultural Employment of H-2B Aliens in the United States; Transition Period AGENCY: Employment and Training Administration, Department of...

75 FR 13784 - Announcement of Public Webinar on the Changes to the Labor Certification Process for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... DEPARTMENT OF LABOR Employment and Training Administration Announcement of Public Webinar on the Changes to the Labor Certification Process for the Temporary Agricultural Employment of H-2A Aliens in the... temporary or seasonal agricultural employment. See Temporary Agricultural Employment of H-2A Aliens in the...

77 FR 24137 - Changes to the Labor Certification Process for the Temporary Non-Agricultural Employment of H-2B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... DEPARTMENT OF LABOR Employment and Training Administration 20 CFR Part 655 RIN 1205-AB58 Changes to the Labor Certification Process for the Temporary Non- Agricultural Employment of H-2B Aliens in the United States; Revisions to Transition Period AGENCY: Employment and Training Administration...

Experience Documentation in Assessing Professional Practice or Work Experience: Lessons from Granting Advanced Certification to Health Education Specialists

ERIC Educational Resources Information Center

Gambescia, Stephen F.; Lysoby, Linda; Perko, Michael; Sheu, Jiunn-Jye

2016-01-01

The purpose of this article is to demonstrate how one profession used an "experience documentation process" to grant advanced certification to qualified certified health education specialists. The competency validation process approved by the certifying organization serves as an example of an additional method, aside from traditional…

20 CFR 655.161 - Criteria for certification.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural...; made all the assurances in § 655.135; and met all the recruitment obligations required by § 655.121 and...

DOE Office of Scientific and Technical Information (OSTI.GOV)

VonThoma, E.; Mosiman, G.

This report documents the process and outcomes involved in achieving the U.S. Department of Energy Zero Energy Ready Home (ZERH) program certification standards while helping homebuilders in Climate Zones 5 and 6 in the Upper Midwest achieve ZERH certification.

WaterSense New Home Certification System

EPA Pesticide Factsheets

This document, a supplement to the WaterSense Program Guidelines, outlines the process for certification and labeling of new homes in compliance with the current version of the WaterSense New Home Specification (specification).

[Death certificate data in France: Production process and main types of analyses].

PubMed

Rey, G

2016-10-01

Mortality data, by the unambiguity of their definition and understanding by all stakeholders, and completeness of registration, are a cornerstone of public health statistics in France and in most industrialized countries. This article describes the data production process, and the main types of possible analyses. Data production is composed of different stages: death certification by a medical doctor on paper or electronic (using a web application) format, data transmission to Inserm, capture and coding of information. The encoding of the information follows the WHO recommendations of the International Classification of Diseases ([ICD], 10th revision used since 2000). It is carried out using an automatic coding software, called Iris, developed in an international consortium. The coding aims, first, at assigning an ICD code to all nosologic entities encountered on the certificate, and then at selecting the underlying cause of death. The latter is the main information used for statistical analyses. Three main types of analysis emerge in the literature: the exploitation of data on the death certificate only, ecological analyses (studies of associations between variables measured across groups) and analysis from data individually linked to other databases. Many public health issues can be addressed with these various analyses. Several developments in the production process are being implemented: the deployment of electronic certification, increased automation of the death certificate information processing and durable and complete record linkage with health insurance and hospitalisation data. They could soon be deeply expanding the scope of possible uses of causes of death data. Copyright © 2016 Société Nationale Française de Médecine Interne (SNFMI). Published by Elsevier SAS. All rights reserved.

Human factors certification in the development of future air traffic control systems

NASA Technical Reports Server (NTRS)

Evans, Alyson E.

1994-01-01

If human factors certification of aviation technologies aims to encompass the wide range of issues which need to be addressed for any new system, then human factors involvement must be present throughout the whole design process in a manner which relates to final certification. A certification process cannot simply be applied to the final product of design. Standards and guidelines will be required by designers at the outset of design for reference in preparing for certification. The most effective use of human factors principles, methods, and measures is made as part of an iterative design process, leading to a system which reflects these as far as possible. This particularly applies where the technology is complex and may be represented by a number of components or sub-systems. Some aspects of the system are best certified during early prototyping, when there is still scope to make changes to software or hardware. At this stage in design, financial and/or time pressures will not rule out the possibility of necessary changes, as may be the case later. Other aspects of the system will be best certified during the final phases of design when the system is in a more complete form and in a realistic environment.

Qualifying Examination Intended to Promote Students‧ Interest in Basic Engineering Course

NASA Astrophysics Data System (ADS)

Yamada, Kenji

In order to develop self-affirmation and confidence, all the third year students in the Department of Electronics and Information Engineering at Ishikawa National College of Technology have been assigned to take a qualifying examination : the Digital Technology Certificate Examination, which is supported by the Ministry of Education, Culture, Sports, Science and Technology. The students who have passed it have gained self-assurance, while the unsuccessful candidates need close attention. This paper discusses the effects of the examination, which was introduced as an incentive for the students to have interest in the specialized course.

77 FR 39517 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

...: 811310 (fabrication and welding services). DATES: All interested parties may submit comments in writing... is responsible for the review and certification process. Comments should address the two bases for...

49 CFR 594.10 - Fee for review and processing of conformity certificate.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., 2012 is $12. However, if the vehicle covered by the certificate has been entered electronically with the U.S. Department of Homeland Security through the Automated Broker Interface and the registered...

49 CFR 594.10 - Fee for review and processing of conformity certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., 2010 is $17. However, if the vehicle covered by the certificate has beenentered electronically with the U.S. Department of Homeland Security through the Automated Broker Interface and the registered...

49 CFR 594.10 - Fee for review and processing of conformity certificate.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., 2012 is $12. However, if the vehicle covered by the certificate has been entered electronically with the U.S. Department of Homeland Security through the Automated Broker Interface and the registered...

49 CFR 594.10 - Fee for review and processing of conformity certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., 2010 is $17. However, if the vehicle covered by the certificate has beenentered electronically with the U.S. Department of Homeland Security through the Automated Broker Interface and the registered...

49 CFR 594.10 - Fee for review and processing of conformity certificate.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., 2014 is $10. However, if the vehicle covered by the certificate has been entered electronically with the U.S. Department of Homeland Security through the Automated Broker Interface and the registered...

76 FR 11705 - Office of the Attorney General; Certification Process for State Capital Counsel Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

..., Office of Legal Counsel, Re: The Scope of the Attorney General's Authority in Certifying Whether a State... rule sets out the mechanics of the certification process for States seeking to opt in to chapter 154... mechanism must provide for the entry of an order by a court of record-- (1) Appointing one or more attorneys...

Responsibility Factors of Reducing Inefficiencies in Information System Processes and Their Role on Intention to Acquire Six Sigma Certification

ERIC Educational Resources Information Center

Hejazi, Sara

2009-01-01

Organizations worldwide have been turning to Six Sigma program (SSP) to eliminate the defects in their products or drive out the variability in their processes to attain a competitive advantage in their marketplace. An effective certification program has been touted as a major contributor to successful implementation of SSP. An effective…

42 CFR 493.1773 - Standard: Basic inspection requirements for all laboratories issued a CLIA certificate and CLIA...

Code of Federal Regulations, 2011 CFR

2011-10-01

... issued a certificate of accreditation, must permit CMS or a CMS agent to conduct validation and complaint inspections. (b) General requirements. As part of the inspection process, CMS or a CMS agent may require the... testing process (preanalytic, analytic, and postanalytic). (4) Permit CMS or a CMS agent access to all...

42 CFR 493.1773 - Standard: Basic inspection requirements for all laboratories issued a CLIA certificate and CLIA...

Code of Federal Regulations, 2012 CFR

2012-10-01

... issued a certificate of accreditation, must permit CMS or a CMS agent to conduct validation and complaint inspections. (b) General requirements. As part of the inspection process, CMS or a CMS agent may require the... testing process (preanalytic, analytic, and postanalytic). (4) Permit CMS or a CMS agent access to all...

42 CFR 493.1773 - Standard: Basic inspection requirements for all laboratories issued a CLIA certificate and CLIA...

Code of Federal Regulations, 2013 CFR

2013-10-01

... issued a certificate of accreditation, must permit CMS or a CMS agent to conduct validation and complaint inspections. (b) General requirements. As part of the inspection process, CMS or a CMS agent may require the... testing process (preanalytic, analytic, and postanalytic). (4) Permit CMS or a CMS agent access to all...

42 CFR 493.1773 - Standard: Basic inspection requirements for all laboratories issued a CLIA certificate and CLIA...

Code of Federal Regulations, 2014 CFR

2014-10-01

... issued a certificate of accreditation, must permit CMS or a CMS agent to conduct validation and complaint inspections. (b) General requirements. As part of the inspection process, CMS or a CMS agent may require the... testing process (preanalytic, analytic, and postanalytic). (4) Permit CMS or a CMS agent access to all...

42 CFR 493.1773 - Standard: Basic inspection requirements for all laboratories issued a CLIA certificate and CLIA...

Code of Federal Regulations, 2010 CFR

2010-10-01

... issued a certificate of accreditation, must permit CMS or a CMS agent to conduct validation and complaint inspections. (b) General requirements. As part of the inspection process, CMS or a CMS agent may require the... testing process (preanalytic, analytic, and postanalytic). (4) Permit CMS or a CMS agent access to all...

Identifying changes in the role of the infection preventionist through the 2014 practice analysis study conducted by the Certification Board of Infection Control and Epidemiology, Inc.

PubMed

Henman, Lita Jo; Corrigan, Robert; Carrico, Ruth; Suh, Kathryn N

2015-07-01

The Certification Board of Infection Control and Epidemiology, Inc (CBIC) is a voluntary autonomous multidisciplinary board that provides direction and administers the certification process for professionals who are responsible for the infection prevention and control program in a health care facility. The CBIC performs a practice analysis approximately every 4-5 years. The practice analysis is an integral part of the certification examination development process and serves as the backbone of the test content outline. In 2013, the CBIC determined that a practice analysis was required and contracted with Prometric to facilitate the process. The practice analysis was carried out in 2014 by a diverse group of subject matter experts from the United States and Canada. The practice analysis results showed a significant change in the number of tasks and associated knowledge required for the competent practice of infection prevention. As authorized by the CBIC, the test committee is currently reclassifying the bank of examination questions as required and is writing and reviewing questions based on the updated test specifications and content outline. The new content outline will be reflected in examinations that are taken beginning in July 2015. This iterative process of assessing and updating the certification examination ensures not only a valid competency tool but a true reflection of current practices. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

A Large-scale Dissemination and Implementation Model for Evidence-based Treatment and Continuing Care

PubMed Central

Garner, Bryan R.; Smith, Jane Ellen; Meyers, Robert J.; Godley, Mark D.

2010-01-01

Multiple evidence-based treatments for adolescents with substance use disorders are available; however, the diffusion of these treatments in practice remains minimal. A dissemination and implementation model incorporating research-based training components for simultaneous implementation across 33 dispersed sites and over 200 clinical staff is described. Key elements for the diffusion of the Adolescent Community Reinforcement Approach and Assertive Continuing Care were: (a) three years of funding to support local implementation; (b) comprehensive training, including a 3.5 day workshop, bi-weekly coaching calls, and ongoing performance feedback facilitated by a web tool; (c) a clinician certification process; (d) a supervisor certification process to promote long-term sustainability; and (e) random fidelity reviews after certification. Process data are summarized for 167 clinicians and 64 supervisors. PMID:21547241