Science.gov

Sample records for cesium bromides

  1. Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells.

    PubMed

    Kulbak, Michael; Gupta, Satyajit; Kedem, Nir; Levine, Igal; Bendikov, Tatyana; Hodes, Gary; Cahen, David

    2016-01-07

    Direct comparison between perovskite-structured hybrid organic-inorganic methylammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3. In order to compare device properties, we fabricated solar cells, with similarly synthesized MAPbBr3 or CsPbBr3, over mesoporous titania scaffolds. Both cell types demonstrated comparable photovoltaic performances under AM1.5 illumination, reaching power conversion efficiencies of ∼6% with a poly aryl amine-based derivative as hole transport material. Further analysis shows that Cs-based devices are as efficient as, and more stable than methylammonium-based ones, after aging (storing the cells for 2 weeks in a dry (relative humidity 15-20%) air atmosphere in the dark) for 2 weeks, under constant illumination (at maximum power), and under electron beam irradiation.

  2. Highly Dynamic Ligand Binding and Light Absorption Coefficient of Cesium Lead Bromide Perovskite Nanocrystals.

    PubMed

    De Roo, Jonathan; Ibáñez, Maria; Geiregat, Pieter; Nedelcu, Georgian; Walravens, Willem; Maes, Jorick; Martins, Jose C; Van Driessche, Isabel; Kovalenko, Maksym V; Hens, Zeger

    2016-02-23

    Lead halide perovskite materials have attracted significant attention in the context of photovoltaics and other optoelectronic applications, and recently, research efforts have been directed to nanostructured lead halide perovskites. Collodial nanocrystals (NCs) of cesium lead halides (CsPbX3, X = Cl, Br, I) exhibit bright photoluminescence, with emission tunable over the entire visible spectral region. However, previous studies on CsPbX3 NCs did not address key aspects of their chemistry and photophysics such as surface chemistry and quantitative light absorption. Here, we elaborate on the synthesis of CsPbBr3 NCs and their surface chemistry. In addition, the intrinsic absorption coefficient was determined experimentally by combining elemental analysis with accurate optical absorption measurements. (1)H solution nuclear magnetic resonance spectroscopy was used to characterize sample purity, elucidate the surface chemistry, and evaluate the influence of purification methods on the surface composition. We find that ligand binding to the NC surface is highly dynamic, and therefore, ligands are easily lost during the isolation and purification procedures. However, when a small amount of both oleic acid and oleylamine is added, the NCs can be purified, maintaining optical, colloidal, and material integrity. In addition, we find that a high amine content in the ligand shell increases the quantum yield due to the improved binding of the carboxylic acid.

  3. Cyanogen bromide

    Integrated Risk Information System (IRIS)

    Cyanogen bromide ; CASRN 506 - 68 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  4. Vinyl bromide

    Integrated Risk Information System (IRIS)

    Vinyl bromide ; CASRN 593 - 60 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  5. Radionuclide Basics: Cesium-137

    EPA Pesticide Factsheets

    The most common radioactive form of cesium (chemical symbol Cs) is Cesium-137. Cesium-137 is produced by nuclear fission for use in medical devices and gauges and is one of the byproducts of nuclear fission in nuclear reactors and nuclear weapons testing.

  6. Ipratropium bromide HFA.

    PubMed

    Wellington, Keri

    2005-01-01

    Ipratropium bromide is a nonselective antagonist of the muscarinic receptors located on airway smooth muscle, and is delivered via a metered-dose inhaler (MDI). Because of the requirement to phase out chlorofluorocarbon (CFC)-propelled MDIs, the ipratropium bromide inhalation aerosol MDI has been redesigned with a hydrofluoroalkane as the propellant (ipratropium bromide HFA). Ipratropium bromide HFA has recently been approved in the US for the maintenance treatment of bronchospasm associated with COPD. Ipratropium bromide HFA 42 microg four times daily (one dose [42 microg] is delivered via two puffs of the inhaler) demonstrated comparable efficacy to that of ipratropium bromide CFC 42 microg four times daily, as measured by spirometric testing, in a large, randomized, double-blind, placebo-controlled, 12-week trial in patients with stable COPD. Similarly, four-times-daily ipratropium bromide HFA 42 microg and ipratropium bromide CFC 42 microg provided a comparable degree of bronchodilation in patients with stable COPD during a 1-year, open-label study primarily designed to assess safety. In both studies, the tolerability profiles of ipratropium bromide HFA and ipratropium bromide CFC were comparable. The most common adverse events were related to respiratory system disorders. During the 1-year study, dry mouth was reported by 1.3% and 0.7% of patients in the ipratropium bromide HFA or ipratropium bromide CFC groups.

  7. Cesium: a bibliography update

    SciTech Connect

    Messiha, F.S.

    1984-01-01

    A brief outline of both industrial and medicinal uses of cesium is given. This is followed by a survey of literature on cesium salts for the period between January 1981 to May 1984. The bibliography searched indicates an interesting pharmacological and behavioral effect for Cs-salts in addition to its well known physiological and itopic effects. A pattern of clinical trials suggests the potential of cesium salts in certain cancer therapies, affective disorders, tumor imaging, radiotherapy and certain cardiovascular usages. The need for continued probing into the biological activity of this alkalimetal is suggested.

  8. Removal of cesium ions from clays by cationic surfactant intercalation.

    PubMed

    Park, Chan Woo; Kim, Bo Hyun; Yang, Hee-Man; Seo, Bum-Kyoung; Moon, Jei-Kwon; Lee, Kune-Woo

    2017-02-01

    We propose a new approach to remediate cesium-contaminated clays based on intercalation of the cationic surfactant dodecyltrimethylammonium bromide (DTAB) into clay interlayers. Intercalation of DTAB was found to occur very rapidly and involved exchanging interlayer cations. The reaction yielded efficient cesium desorption (∼97%), including of a large amount of otherwise non-desorbable cesium ions by cation exchange with ammonium ions. In addition, the intercalation of DTAB afforded an expansion of the interlayers, and an enhanced desorption of Cs by cation exchange with ammonium ions even at low concentrations of DTAB. Finally, the residual intercalated surfactants were easily removed by a decomposition reaction with hydrogen peroxide in the presence of Cu(2+)/Fe(2+) catalysts.

  9. A cesium bromide photocathode excited by 405 nm radiation

    NASA Astrophysics Data System (ADS)

    Maldonado, J. R.; Cheng, Y. T.; Pianetta, P.; Pease, Fabian W.; Hesselink, L.

    2014-07-01

    In several applications, such as electron beam lithography and X-ray differential phase contrast imaging, there is a need for a free electron source with a current density at least 10 A/cm2 yet can be shaped with a resolution down to 20 nm and pulsed. Additional requirements are that the source must operate in a practical demountable vacuum (>1e-9 Torr) and be reasonably compact. In prior work, a photocathode comprising a film of CsBr on metal film on a sapphire substrate met the requirements except it was bulky because it required a beam (>10 W/cm2) of 257 nm radiation. Here, we describe an approach using a 405 nm laser which is far less bulky. The 405 nm laser, however, is not energetic enough to create color centers in CsBr films. The key to our approach is to bombard the CsBr film with a flood beam of about 1 keV electrons prior to operation. Photoelectron efficiencies in the range of 100-1000 nA/mW were demonstrated with lifetimes exceeding 50 h between electron bombardments. We suspect that the electron bombardment creates intraband color centers whence electrons can be excited by the 405 nm photons into the conduction band and thence into the vacuum.

  10. Cesium chloride: preventive medicine for radioactive cesium exposure?

    PubMed

    Braverman, E R; Sohler, A; Pfeiffer, C C

    1988-06-01

    Cesium is produced in high yield fission of uranium and plutonium. Radioactive cesium needles are a radiation hazard for radiotherapists. In this age of nuclear reactors, i.e. Chernobyl, radioactive cesium exposure may be a growing problem. Furthermore, there are numerous therapeutic potentials for cesium therapy, i.e. cancer, depression and schizophrenia. We explored the clearance of cesium in man and found that an oral dose of 50 mg maintains elevated blood cesium levels for 80 days. Cesium is accumulated mainly in the red blood cell fraction. Larger doses (6-9 grams) produce no observed harmful effects and maintain elevated blood levels of cesium for more than a year. Our data suggests there is a threshold of maximum cesium saturation in blood; if maintained, any additional cesium exposure, i.e. radioactive cesium, would be excreted at a more rapid rate. It is probable that large cesium doses can protect against radiation toxicity by blocking sites on red blood cells and thereby result in increased excretion and clearance of the radioactive forms of cesium. This hypothesis should be easily testable in laboratory animals.

  11. NPB Cesium Space Experiment

    NASA Technical Reports Server (NTRS)

    Parsons, George M., III

    1992-01-01

    Neutral Particle Beam (NPB) weapons systems are planned to perform the ballistic missile defense functions of nuclear weapon/decoy discrimination and warhead kill at appropriate energy levels and ion currents. Negatively charged ions are produced in a specialized ion source and focused into a high quality particle beam. NPB linear accelerators accelerate and steer the negatively charged ions using electric and magnetic fields. After acceleration and steering the neutralizer system strips away extra electrons from ions to form the electrically neutral particle beam. The neutral beam then travels through space to the target unaffected by the Earth's magnetic fields. Continuing technological advances have greatly reduced the size and weight of NPB accelerator systems. Ion current production has been enhanced by over 100 percent with the intermittent addition of cesium at the NPB ion source device. This increase in current is essential to attain the most light weight, compact NPB platforms and minimize expensive launch costs. Addition of cesium into the ion source has been identified by the NPB community as the highest priority risk reduction space experiment necessary prior to planned NPB accelerator experiments and later weapons systems. The NPB Cesium Space Experiment is planned to successfully demonstrate controlled cesium introduction and vaporization into a simulated ion source chamber. Microgravity effects on the cesium deposition will be studied as will the effects of small amounts of cesium on high voltage accelerator components that might be susceptible to electrical insulator break downs. The experiment design will simulate as closely as possible the environment, physical and operational characteristics of the actual NPB ion source.

  12. Methods of producing cesium-131

    DOEpatents

    Meikrantz, David H; Snyder, John R

    2012-09-18

    Methods of producing cesium-131. The method comprises dissolving at least one non-irradiated barium source in water or a nitric acid solution to produce a barium target solution. The barium target solution is irradiated with neutron radiation to produce cesium-131, which is removed from the barium target solution. The cesium-131 is complexed with a calixarene compound to separate the cesium-131 from the barium target solution. A liquid:liquid extraction device or extraction column is used to separate the cesium-131 from the barium target solution.

  13. Intracellular imaging of cesium distribution in Arabidopsis using Cesium Green.

    PubMed

    Akamatsu, Masaaki; Komatsu, Hirokazu; Mori, Taizo; Adams, Eri; Shin, Ryoung; Sakai, Hideki; Abe, Masahiko; Hill, Jonathan P; Ariga, Katsuhiko

    2014-06-11

    The accident at the Fukushima Daiichi nuclear power plant, which was one of the most serious adverse effects of the Great East Japan Earthquake, was accompanied by the release of a large quantity of radioactive materials including (137)Cs to the environment. In a previous report, we developed and proposed a cesium (Cs) fluorescent probe, "Cesium Green", that enables the detection of cesium carbonate particles by spraying an alcoholic solution of the Cesium Green probe. In this paper, the sensing activity of this probe was investigated for its selectivity (by using an optode method) and for its application to detect micrometer-sizes Cs particles. Cesium Green was also assessed for its use in plant cellular imaging of Cs localization in Arabidopsis. Cesium Green enabled high-resolution Cs imaging of Cs-containing particles and of Cs contained in plants.

  14. Recovery of cesium

    DOEpatents

    Izatt, Reed M.; Christensen, James J.; Hawkins, Richard T.

    1984-01-01

    A process of recovering cesium ions from mixtures of ions containing them and other ions, e.g., a solution of nuclear waste materials, which comprises establishing a separate source phase containing such a mixture of ions, establishing a separate recipient phase, establishing a liquid membrane phase in interfacial contact with said source and recipient phases, said membrane phase containing a ligand, preferably a selected calixarene as depicted in the drawing, maintaining said interfacial contact for a period of time long enough to transport by said ligand a substantial portion of the cesium ion from the source phase to the recipient phase, and recovering the cesium ion from the recipient phase. The separation of the source and recipient phases may be by the membrane phase only, e.g., where these aqueous phases are emulsified as dispersed phases in a continuous membrane phase, or may include a physical barrier as well, e.g., an open-top outer container with an inner open-ended container of smaller cross-section mounted in the outer container with its open bottom end spaced from and above the closed bottom of the outer container so that the membrane phase may fill the outer container to a level above the bottom of the inner container and have floating on its upper surface a source phase and a recipient phase separated by the wall of the inner container as a physical barrier. A preferred solvent for the ligand is a mixture of methylene chloride and carbon tetrachloride.

  15. Clinical effects of cesium intake.

    PubMed

    Melnikov, Petr; Zanoni, Lourdes Zélia

    2010-06-01

    The knowledge about cesium metabolism and toxicity is sparse. Oral intake of cesium chloride has been widely promoted on the basis of the hypothesis referred to as "high pH cancer therapy", a complimentary alternative medicine method for cancer treatment. However, no properly confirmed tumor regression was reported so far in all probability because of neither theoretical nor experimental grounds for this proposal. The aim of the present review was to resume and discuss the material currently available on cesium salts and their applications in medicine. The presence of cesium in the cell does not guarantee high pH of its content, and there is no clinical evidence to support the claims that cancer cells are vulnerable to cesium. Cesium is relatively safe; signs of its mild toxicity are gastrointestinal distress, hypotension, syncope, numbness, or tingling of the lips. Nevertheless, total cesium intakes of 6 g/day have been found to produce severe hypokalemia, hypomagnesemia, prolonged QTc interval, episodes of polymorphic ventricular tachycardia, with or without torsade de pointes, and even acute heart arrest. However, full information on its acute and chronic toxicity is not sufficiently known. Health care providers should be aware of the cardiac complications, as a result of careless cesium usage as alternative medicine.

  16. Metals fact sheet--cesium

    SciTech Connect

    1997-03-01

    Cesium, the most alkaline and electropositive metal, is used by several industries for a variety of applications, including chemical catalysis, biomedical, photoelectrical, and glass manufacturing. While the traditional market for cesium has remained small, potential growth areas exist in the chemical catalysis and the oil and gas industry.

  17. Mineral resource of the month: cesium

    USGS Publications Warehouse

    Angulo, Marc A.

    2010-01-01

    The article offers information on cesium, a golden alkali metal derived from the Latin word caesium which means bluish gray. It mentions that cesium is the first element discovered with the use of spectroscopy. It adds that the leading producer and supplier of cesium is Canada and there are 50,000 kilograms of cesium consumed of the world in a year. Moreover, it states that only 85% of the cesium formate can be retrieved and recycled.

  18. Mercury Bromide Laser Research.

    DTIC Science & Technology

    1981-05-04

    Discharge", Optics Lett., 2(3), (March 1978). 7. R. Burnham, "Discharge Pumped Mercuric Halide Dissociation Lasers", Appl. Phys. Lett., 33: 15 (July 1978...laser and fluorescence signals. Neutral density filters served to prevent saturation of the detector during the laser measurements. F. Laser Output as a...REFERENCES . E. J. Schimitschek and J. E. Celto, " Mercuric Bromide Dissociation Laser in an Electric Discharge," Optics Lett. 2(3), March 1978. This

  19. Cesium diffusion in graphite

    SciTech Connect

    Evans, R.B. III; Davis, W. Jr.; Sutton, A.L. Jr.

    1980-05-01

    Experiments on diffusion of /sup 137/Cs in five types of graphite were performed. The document provides a completion of the report that was started and includes a presentation of all of the diffusion data, previously unpublished. Except for data on mass transfer of /sup 137/Cs in the Hawker-Siddeley graphite, analyses of experimental results were initiated but not completed. The mass transfer process of cesium in HS-1-1 graphite at 600 to 1000/sup 0/C in a helium atmosphere is essentially pure diffusion wherein values of (E/epsilon) and ..delta..E of the equation D/epsilon = (D/epsilon)/sub 0/ exp (-..delta..E/RT) are about 4 x 10/sup -2/ cm/sup 2//s and 30 kcal/mole, respectively.

  20. Cesium chloride-induced torsades de pointes.

    PubMed

    Wiens, Matthew; Gordon, Wendy; Baulcomb, Daisy; Mattman, Andre; Mock, Tom; Brown, Robert

    2009-09-01

    The chloride salt of cesium, a group 1A element, is gaining popularity as an alternative treatment of advanced cancers. Cesium chloride has primarily been used in cardiovascular research for arrhythmogenesis in animals because of its potassium-blocking effects. The present report describes a 45-year-old woman with metastatic breast cancer who experienced repeated episodes of torsades de pointes polymorphic ventricular tachycardia after several months of oral cesium therapy. There was a clear temporal relationship between cesium ingestion and the arrhythmia, which later resolved following discontinuation of cesium therapy. Serial cesium plasma and whole blood levels were measured over the ensuing six months and pharmacokinetic analysis was performed.

  1. METHOD OF PREPARING RADIOACTIVE CESIUM SOURCES

    DOEpatents

    Quinby, T.C.

    1963-12-17

    A method of preparing a cesium-containing radiation source with physical and chemical properties suitable for high-level use is presented. Finely divided silica is suspended in a solution containing cesium, normally the fission-product isotope cesium 137. Sodium tetraphenyl boron is then added to quantitatively precipitate the cesium. The cesium-containing precipitate is converted to borosilicate glass by heating to the melting point and cooling. Up to 60 weight percent cesium, with a resulting source activity of up to 21 curies per gram, is incorporated in the glass. (AEC)

  2. Cesium control and diagnostics in surface plasma negative ion sources

    SciTech Connect

    Dudnikov, Vadim; Chapovsky, Pavel; Dudnikov, Andrei

    2010-02-15

    For efficient and reliable negative ion generation it is very important to improve a cesium control and diagnostics. Laser beam attenuation and resonance fluorescence can be used for measurement of cesium distribution and cesium control. Resonant laser excitation and two-photon excitation can be used for improved cesium ionization and cesium trapping in the discharge chamber. Simple and inexpensive diode lasers can be used for cesium diagnostics and control. Cesium migration along the surface is an important mechanism of cesium escaping. It is important to develop a suppression of cesium migration and cesium accumulation on the extraction system.

  3. Process for cesium decontamination and immobilization

    DOEpatents

    Komarneni, S.; Roy, R.

    1988-04-25

    Cesium can be selectively recovered from a nuclear waste solution containing cesium together with other metal ions by contact with a modified phlogopite which is a hydrated, sodium phlogopite mica. Once the cesium has entered the modified phlogopite it is fixed and can be safely stored for long periods of time. 6 figs., 2 tabs.

  4. Method of removing cesium from steam

    DOEpatents

    Carson, Jr., Neill J.; Noland, Robert A.; Ruther, Westly E.

    1991-01-01

    Method for removal of radioactive cesium from a hot vapor, such as high temperature steam, including the steps of passing input hot vapor containing radioactive cesium into a bed of silicate glass particles and chemically incorporating radioactive cesium in the silicate glass particles at a temperature of at least about 700.degree. F.

  5. Process for cesium decontamination and immobilization

    DOEpatents

    Komarneni, Sridhar; Roy, Rustum

    1989-01-01

    Cesium can be selectively recovered from a nuclear waste solution containing cesium together with other metal ions by contact with a modified phlogopite which is a hydrated, sodium phlogopite mica. Once the cesium has entered the modified phlogopite it is fixed and can be safely stored for long periods of time.

  6. Managing Nematodes without Methyl Bromide

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is an effective pre-plant soil fumigant used to control nematodes in many high-input, high-value production systems including vegetables, nurseries, ornamentals, tree fruits, strawberries, and grapes. Because methyl bromide has provided a reliable return on investment for nematode c...

  7. Iron bromide vapor laser

    NASA Astrophysics Data System (ADS)

    Sukhanov, V. B.; Shiyanov, D. V.; Trigub, M. V.; Dimaki, V. A.; Evtushenko, G. S.

    2016-03-01

    We have studied the characteristics of a pulsed gas-discharge laser on iron bromide vapor generating radiation with a wavelength of 452.9 nm at a pulse repetition frequency (PRF) of 5-30 kHz. The maximum output power amounted to 10 mW at a PRF within 5-15 kHz for a voltage of 20-25 kV applied to electrodes of the discharge tube. Addition of HBr to the medium produced leveling of the radial profile of emission. Initial weak lasing at a wavelength of 868.9 nm was observed for the first time, which ceased with buildup of the main 452.9-nm line.

  8. Cesium oxide-cesium solution as a source of cesium and oxygen.

    NASA Technical Reports Server (NTRS)

    Gunther, B.; Rufeh, F.; Pigford, T. H.

    1972-01-01

    Examination of the feasibility of using the solution as a source of cesium and oxygen, with description of an experimental system designed for a systematic investigation. Preliminary data are presented. Thermionic performance of the converter was recorded before the injection of oxygen at emitter temperatures of 1600, 1700, 1800, and 1900 K. The power of this converter, which had a polycrystalline tungsten emitter and a polycrystalline molybdenum collector, is compared with other converters. Experimental results show that cesium oxide mole factors higher than 0.18 are needed to achieve oxygen effects. It appears not to be necessary to be concerned about avoiding oxygen impurities in the cesium reservoir, since mole fractions as high as 0.18 have failed to influence the performance.

  9. Cesium Eluate Physical Property Determination

    SciTech Connect

    Baich, M.A.

    2001-02-13

    Two bench-scale process simulations of the proposed cesium eluate evaporation process of concentrating eluate produced in the Hanford Site Waste Treatment Plant were conducted. The primary objective of these experiments was to determine the physical properties and the saturation concentration of the eluate evaporator bottoms while producing condensate approximately 0.50 molar HN03.

  10. CESIUM RECOVERY FROM AQUEOUS SOLUTIONS

    DOEpatents

    Goodall, C.A.

    1960-09-13

    A process is given for precipitating cesium on zinc ferricyanide (at least 0.0004 M) from aqueous solutions containing mineral acid in a concentration of from 0.2 N acidity to 0.61 N acid-deficiency and advantageously, but not necessarily, also aluminum nitrate in a concentration of from l to 2.5 M.

  11. Matrix elimination ion chromatography method for the determination of trace levels of anionic impurities in high purity cesium iodide.

    PubMed

    Ayushi; Kumar, Sangita D; Reddy, A V R

    2012-01-01

    In the present study an ion chromatographic method based on matrix elimination has been developed for the determination of anionic impurities in high purity cesium iodide crystals. The presence of impurities has a detrimental effect on the characteristics of detectors based on cesium iodide crystals. In particular, oxygen-containing anions inhibit the resolving power of scintillators and decrease the optical absorption. The quantitative determination of anions (fluoride, chloride, bromide, nitrate, phosphate, and sulphate) simultaneously in the high-purity cesium iodide crystals has not been carried out before. The large concentration of iodide poses a challenge in the determination of anions (especially phosphate and sulphate); hence, matrix elimination is accomplished by adopting a sample pretreatment technique. The method is validated for linearity, accuracy, and precision. The limit of detection for different anions is in the range of 0.3-3 µg/g, and the relative standard deviation is in the range of 4-6% for the overall method.

  12. Method for primary containment of cesium wastes

    DOEpatents

    Angelini, Peter; Lackey, Walter J.; Stinton, David P.; Blanco, Raymond E.; Bond, Walter D.; Arnold, Jr., Wesley D.

    1983-01-01

    A method for producing a cesium-retentive waste form, characterized by a high degree of compositional stability and mechanical integrity, is provided by subjecting a cesium-loaded zeolite to heat under conditions suitable for stabilizing the zeolite and immobilizing the cesium, and coating said zeolite for sufficient duration within a suitable environment with at least one dense layer of pyrolytic carbon to seal therein said cesium to produce a final, cesium-bearing waste form. Typically, the zeolite is stabilized and the cesium immobilized in less than four hours by confinement within an air environment maintained at about 600.degree. C. Coatings are thereafter applied by confining the calcined zeolite within a coating environment comprising inert fluidizing and carbon donor gases maintained at 1,000.degree. C. for a suitable duration.

  13. Cesium-specific phenolic ion exchange resin

    DOEpatents

    Bibler, J.P.; Wallace, R.M.

    1995-08-15

    A phenolic, cesium-specific, cation exchange resin is prepared by neutralizing resorcinol with potassium hydroxide, condensing/polymerizing the resulting intermediate with formaldehyde, heat-curing the resulting polymer to effect cross-linking and grinding it to desired particle size for use. This resin will selectively and efficiently adsorb cesium ions in the presence of a high concentration of sodium ions with a low carbon to cesium ratio. 2 figs.

  14. Cesium-specific phenolic ion exchange resin

    DOEpatents

    Bibler, Jane P.; Wallace, Richard M.

    1995-01-01

    A phenolic, cesium-specific, cation exchange resin is prepared by neutralizing resorcinol with potassium hydroxide, condensing/polymerizing the resulting intermediate with formaldehyde, heat-curing the resulting polymer to effect cross-linking and grinding it to desired particle size for use. This resin will selectively and efficiently adsorb cesium ions in the presence of a high concentration of sodium ions with a low carbon to cesium ratio.

  15. Cesium standard for satellite application

    NASA Technical Reports Server (NTRS)

    Bloch, M. B.; Meirs, M.; Pascaru, I.; Weinstein, B.

    1983-01-01

    A Cesium frequency standard that was developed for satellite applications is discussed. It weighs 23 lbs. and uses 23.5 watts of power, achieves a stability of 1 x ten to the minus 13th power/100,000 seconds, and is radiation hardened. To achieve the weight and reliability requirements, both thick and thin film hybrid circuits were utilized. A crystal oscillator is used to improve short-term stability and performance on a moving platform.

  16. Cesium recovery from aqueous solutions

    DOEpatents

    Goodhall, C. A.

    1960-09-13

    A process for recovering cesium from aqueous solutions is given in which precipitation on zinc ferricyanide is used. The precipitation is preferably carried out in solutions containing at least 0.0004M zinc ferricyanide, an acidity ranging from 0.2N mineral acid to 0.61N acid deficiency, and 1 to 2.5M aluminum nitrate. (D.L.C.)

  17. Cesium heat-pipe thermostat

    SciTech Connect

    Wu, F.; Song, D.; Sheng, K.; Wu, J.; Yi, X.; Yu, Z.

    2013-09-11

    In this paper the authors report a newly developed Cesium Heat-Pipe Thermostat (Cs HPT) with the operation range of 400 °C to 800 °C. The working medium is cesium (Cs) of 99.98% purity and contains no radioisotope. A Cs filing device is developed which can prevent Cs being in contact with air. The structural material is stainless steel. A 5000 h test has been made to confirm the compatibility between cesium and stainless steel. The Cs HPT has several thermometer wells of 220mm depth with different diameters for different sizes of thermometers. The temperature uniformity of the Cs HPT is 0.06 °C to 0.20 °C. A precise temperature controller is used to ensure the temperature fluctuation within ±0.03 °C. The size of Cs HPT is 380mm×320mm×280mm with foot wheels for easy moving. The thermostat has been successfully used for the calibration of industrial platinum resistance thermometers and thermocouples.

  18. THE VISCOSITY OF HELIUM-CESIUM MIXTURES,

    DTIC Science & Technology

    The viscosities of helium-cesium mixtures having mole fractions of cesium from zero to unity were evaluated using a Lennard - Jones 6-12 interaction potential for all encounters in the Enskog Chapman expressions for the viscosity of a binary mixture. (Author)

  19. CESIUM RECOVERY FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schneider, R.A.

    1961-06-20

    Cesium may be precipitated from an aqueous solution whose acidity ranges between a pH of 1.5 and a molarity of 5 on cobaltous, zinc, cadmium, nickel, or ferrous cobalticyanide. This precipitation brings about a separation from most fission products. Ruthenium which coprecipitates to a great degree can be removed by dissolving in sulfuric acid and boiling the solution in the presence of periodic acid for volatilization; other coprecipitated fission products can then be precipitated from the sulfuric acid solution with a ferric hydroxide carrier.

  20. Bromide Adsorption by Reference Minerals and Soils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bromide, Br-, adsorption behavior was investigated on amorphous Al and Fe oxide, montmorillonite, kaolinite, and temperate and tropical soils. Bromide adsorption decreased with increasing solution pH with minimal adsorption occurring above pH 7. Bromide adsorption was higher for amorphous oxides t...

  1. Sintered wire cesium dispenser photocathode

    DOEpatents

    Montgomery, Eric J; Ives, R. Lawrence; Falce, Louis R

    2014-03-04

    A photoelectric cathode has a work function lowering material such as cesium placed into an enclosure which couples a thermal energy from a heater to the work function lowering material. The enclosure directs the work function lowering material in vapor form through a low diffusion layer, through a free space layer, and through a uniform porosity layer, one side of which also forms a photoelectric cathode surface. The low diffusion layer may be formed from sintered powdered metal, such as tungsten, and the uniform porosity layer may be formed from wires which are sintered together to form pores between the wires which are continuous from the a back surface to a front surface which is also the photoelectric surface.

  2. Primary cesium time and frequency standards

    SciTech Connect

    Abashev, Yu.G.; Elkin, G.A.; Pushkin, S.B.

    1984-05-01

    Cesium frequency standards are used to determine the atomic second in SI units and to provide a national atomic-time scale at the leading meteorological laboratories of the world. In this paper, the state of cesium and atomic frequency standards are examined and methods of increasing their accuracy are analyzed. High-purity polycrystals of platinum-iridium alloy or high-purity and structurally perfect single crystals of tungsten and molybdenum are used as ionizers in beam detection. Relative frequency instabilities that have been obtained at the various laboratories are presented. The main sources of error in reproducing the unperturbed-transition frequency of cesium atoms are discussed, including the second-order Doppler effect and the Majorana effect. Accuracy estimates for cesium frequency standards of the world's leading meteorological laboratories are shown.

  3. RECOVERY OF CESIUM FROM WASTE SOLUTIONS

    DOEpatents

    Burgus, W.H.

    1959-06-30

    This patent covers the precipitation of fission products including cesium on nickel or ferric ferrocyanide and subsequent selective dissolution from the carrier with a solution of ammonia or mercurlc nitrate.

  4. Environmental Tests Of Cesium Frequency Standards

    NASA Technical Reports Server (NTRS)

    Sydnor, Richard L.; Tucker, Thomas K.; Greenhall, Charles A.; Diener, William A.; Maleki, Lutfollah

    1992-01-01

    Report describes environmental tests of cesium-beam frequency standards of United States Naval Observatory. Purpose of tests to determine effects of atmospheric temperature, relative humidity, and pressure on frequencies.

  5. Atomically thin cesium lead bromide perovskite quantum wires with high luminescence.

    PubMed

    Huang, Hongwen; Liu, Mei; Li, Jing; Luo, Laihao; Zhao, Jiangtao; Luo, Zhenlin; Wang, Xiaoping; Ye, Zhizhen; He, Haiping; Zeng, Jie

    2017-01-07

    We report a room-temperature colloidal synthesis of few-unit-cell-thick CsPbBr3 QWs with lengths over a hundred nanometers. The surfactant-directed oriented attachment growth mechanism was proposed to explain the formation of such CsPbBr3 QWs. Owing to the strong quantum confinement effect, the photoluminescence (PL) emission peak of few-unit-cell-thick CsPbBr3 QWs blue-shifted to 430 nm. The ensemble PL quantum yield (PLQY) of the few-unit-cell-thick CsPbBr3 QWs increased to 21.13% through a simple heat-treatment process. The improvement of PLQY was ascribed to the reduction of the density of surface trap states and defect states induced by the heat-treatment process. Notably, the dependence of the bandgap on the diameter with different numbers of unit cells was presented for the first time in 1-D CsPbBr3 QWs on the basis of the produced few-unit-cell-thick CsPbBr3 QWs.

  6. A cesium bromide photocathode excited by 405 nm radiation

    SciTech Connect

    Maldonado, J. R.; Cheng, Y. T.; Pease, Fabian W.; Hesselink, L.; Pianetta, P.

    2014-07-14

    In several applications, such as electron beam lithography and X-ray differential phase contrast imaging, there is a need for a free electron source with a current density at least 10 A/cm{sup 2} yet can be shaped with a resolution down to 20 nm and pulsed. Additional requirements are that the source must operate in a practical demountable vacuum (>1e-9 Torr) and be reasonably compact. In prior work, a photocathode comprising a film of CsBr on metal film on a sapphire substrate met the requirements except it was bulky because it required a beam (>10 W/cm{sup 2}) of 257 nm radiation. Here, we describe an approach using a 405 nm laser which is far less bulky. The 405 nm laser, however, is not energetic enough to create color centers in CsBr films. The key to our approach is to bombard the CsBr film with a flood beam of about 1 keV electrons prior to operation. Photoelectron efficiencies in the range of 100–1000 nA/mW were demonstrated with lifetimes exceeding 50 h between electron bombardments. We suspect that the electron bombardment creates intraband color centers whence electrons can be excited by the 405 nm photons into the conduction band and thence into the vacuum.

  7. Statistical properties of high performance cesium standards

    NASA Technical Reports Server (NTRS)

    Percival, D. B.

    1973-01-01

    The intermediate term frequency stability of a group of new high-performance cesium beam tubes at the U.S. Naval Observatory were analyzed from two viewpoints: (1) by comparison of the high-performance standards to the MEAN(USNO) time scale and (2) by intercomparisons among the standards themselves. For sampling times up to 5 days, the frequency stability of the high-performance units shows significant improvement over older commercial cesium beam standards.

  8. Cesium and strontium ion specific exchangers

    SciTech Connect

    Yates, S.

    1996-10-01

    This work is one of two parallel projects that are part of an ESP task to develop high-capacity, selective, solid extractants for cesium, strontium, and technetium from nuclear wastes. In this subtask, Pacific Northwest National Laboratory (PNNL) is collaborating with AlliedSignal, Inc. (Des Plaines, Illinois) to develop inorganic ion exchangers that are selective for strontium and cesium from alkaline high-level waste and groundwater streams.

  9. Merging Maser and Cesium Clocks in Timescales

    DTIC Science & Technology

    2011-10-01

    OCT 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Merging Maser And Cesium Clocks In Timescales 5a...Prescribed by ANSI Std Z39-18 Merging Maser and Cesium Clocks In Timescales Demetrios...recent maser data relatively higher than older maser data. A Kalman Filter could assign different phase, frequency, and frequency drift process

  10. A convenient iodination method for alcohols using cesium iodide/methanesulfonic acid and its comparison using cesium iodide/p-toluenesulfonic acid or cesium iodide/aluminium chloride.

    PubMed

    Khan, Khalid Mohammed; Zia-Ullah; Perveen, Shahnaz; Hayat, Safdar; Ali, Muhammad; Voelter, Wolfgang

    2008-01-01

    In situ generation of hydrogen iodide from cesium iodide/methanesulfonic acid was found to be an attractive reagent combination for the conversion of alkyl, allyl, and benzyl alcohols to their corresponding iodides under mild conditions. The method is compared with that using cesium iodide/p-toluenesulfonic acid or cesium iodide/aluminium chloride.

  11. Lanthanum Bromide Detectors for Safeguards Measurements

    SciTech Connect

    Wright, J.

    2011-05-25

    Lanthanum bromide has advantages over other popular inorganic scintillator detectors. Lanthanum bromide offers superior resolution, and good efficiency when compared to sodium iodide and lanthanum chloride. It is a good alternative to high purity germanium detectors for some safeguards applications. This paper offers an initial look at lanthanum bromide detectors. Resolution of lanthanum bromide will be compared lanthanum chloride and sodium-iodide detectors through check source measurements. Relative efficiency and angular dependence will be looked at. Nuclear material spectra, to include plutonium and highly enriched uranium, will be compared between detector types.

  12. Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide I. Surface properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide.

    PubMed

    Harkot, Joanna; Jańczuk, Bronisław

    2009-03-15

    Surface tension measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C(12)(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). Isotherms and thermodynamic adsorption parameters were determined from the surface tension data. Firstly, the surface excess concentration in the adsorbed monolayer and the total concentration of the surfactants were determined, then the standard free energy of adsorption was calculated by different methods. In the calculations, different orientations of the surfactants at the adsorbed monolayer were also taken into account. From the experimental and calculated data it results that the difference in the structure of the two cationic surfactants by changing the methyl group for aryl one in their heads causes an increase of the efficiency and a decrease of the effectiveness of adsorption at water-air interface, and that the standard free energy of adsorption can be predicted from the surface tension of the surfactants assuming the aryl group to be equivalent to 3.5 methylene groups. The experimentally obtained difference between the standard free energy of adsorption of the C(12)(EDMAB) and BDDAB was in good agreement with that theoretically accounted, corresponding to the standard free energy of adsorption of the aryl group. However, the best correlation between the values was obtained when a parallel orientation of the surfactant molecules at the adsorbed monolayer was taken into account.

  13. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be...) Bromoacetone, methyl bromide, chloropicrin and methyl bromide mixtures, chloropicrin and methyl...

  14. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be... Group I performance level. (b) Bromoacetone, methyl bromide, chloropicrin and methyl bromide...

  15. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be...) Bromoacetone, methyl bromide, chloropicrin and methyl bromide mixtures, chloropicrin and methyl...

  16. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be... Group I performance level. (b) Bromoacetone, methyl bromide, chloropicrin and methyl bromide...

  17. REMOVAL OF CESIUM BY SORPTION FROM AQUEOUS SOLUTIONS

    DOEpatents

    Ames, L.L.

    1962-01-16

    ABS>A process is given for selectively removing cesium from acid aqueous solutions containing cesium in microquantities and other cations in macroquantities by absorption on clinoptilolite. The cesium can be eluted from the clinoptilolite with a solution of ammonia, potassium hydroxide, or rubidium hydroxide. (AEC)

  18. 40 CFR 721.10168 - Cesium tungsten oxide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Cesium tungsten oxide. 721.10168... Substances § 721.10168 Cesium tungsten oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as cesium tungsten oxide (PMN P-08-275; CAS No....

  19. 40 CFR 721.10168 - Cesium tungsten oxide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Cesium tungsten oxide. 721.10168... Substances § 721.10168 Cesium tungsten oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as cesium tungsten oxide (PMN P-08-275; CAS No....

  20. 40 CFR 721.10168 - Cesium tungsten oxide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Cesium tungsten oxide. 721.10168... Substances § 721.10168 Cesium tungsten oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as cesium tungsten oxide (PMN P-08-275; CAS No....

  1. 40 CFR 721.10168 - Cesium tungsten oxide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Cesium tungsten oxide. 721.10168... Substances § 721.10168 Cesium tungsten oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as cesium tungsten oxide (PMN P-08-275; CAS No....

  2. 40 CFR 721.10168 - Cesium tungsten oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Cesium tungsten oxide. 721.10168... Substances § 721.10168 Cesium tungsten oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as cesium tungsten oxide (PMN P-08-275; CAS No....

  3. Cesium injection system for negative ion duoplasmatrons

    DOEpatents

    Kobayashi, Maasaki; Prelec, Krsto; Sluyters, Theodorus J

    1978-01-01

    Longitudinally extending, foraminous cartridge means having a cylindrical side wall forming one flat, circular, tip end surface and an opposite end; an open-ended cavity, and uniformly spaced orifices for venting the cavity through the side wall in the annulus of a plasma ring for uniformly ejecting cesium for coating the flat, circular, surface. To this end, the cavity is filled with a cesium containing substance and attached to a heater in a hollow-discharge duoplasmatron. By coating the flat circular surface with a uniform monolayer of cesium and locating it in an electrical potential well at the end of a hollow-discharge, ion duoplasmatron source of an annular hydrogen plasma ring, the negative hydrogen production from the duoplasmatron is increased. The negative hydrogen is produced on the flat surface of the cartridge and extracted by the electrical potential well along a trajectory coaxial with the axis of the plasma ring.

  4. METHOD FOR THE RECOVERY OF CESIUM VALUES

    DOEpatents

    Rimshaw, S.J.

    1960-02-16

    A method is given for recovering Cs/sup 137/ from radioactive waste solutions together with extraneous impurities. Ammonium alum is precipitated in the waste solution. The alum, which carries the cesium, is separated from the supernatant liquid and then dissolved in water. The resulting aqueous solution is then provided with a source of hydroxyl ions, which precipitates aluminum as the hydroxide, and the aluminum hydroxide is separated from the resulting liquid. This liquid, which contains anionic impurities together with ammonium and cesium, is passed through an anion exchange resin bed which removes the anionic impurities. The ammonium in the effluent is removed by destructive distiilation, leaving a substantiaily pure cesium salt in the effluent.

  5. Plasma etching of cesium iodide

    NASA Astrophysics Data System (ADS)

    Yang, X.; Hopwood, J.; Tipnis, S.; Nagarkar, V.; Gaysinskiy, V.

    2002-01-01

    Thick films of cesium iodide (CsI) are often used to convert x-ray images into visible light. Spreading of the visible light within CsI, however, reduces the resolution of the resulting image. Anisotropic etching of the CsI film into an array of micropixels can improve the image resolution by confining light within each pixel. The etching process uses a high-density inductively coupled plasma to pattern CsI samples held by a heated, rf-biased chuck. Fluorine-containing gases such as CF4 are found to enhance the etch rate by an order of magnitude compared to Ar+ sputtering alone. Without inert-gas ion bombardment, however, the CF4 etch becomes self-limited within a few microns of depth due to the blanket deposition of a passivation layer. Using CF4+Ar continuously removes this layer from the lateral surfaces, but the formation of a thick passivation layer on the unbombarded sidewalls of etched features is observed by scanning electron microscopy. At a substrate temperature of 220 °C, the minimum ion-bombardment energy for etching is Ei~50 eV, and the rate depends on Ei1/2 above 65 eV. In dilute mixtures of CF4 and Ar, the etch rate is proportional to the gas-phase density of atomic fluorine. Above 50% CF4, however, the rate decreases, indicating the onset of net surface polymer deposition. These observations suggest that anisotropy is obtained through the ion-enhanced inhibitor etching mechanism. Etching exhibits an Arrhenius-type behavior in which the etch rate increases from ~40 nm/min at 40 °C to 380 nm/min at 330 °C. The temperature dependence corresponds to an activation energy of 0.13+/-0.01 eV. This activation energy is consistent with the electronic sputtering mechanism for alkali halides.

  6. Crystalline silicotitanates for cesium/strontium removal

    SciTech Connect

    Brown, N.; Miller, J.; Sherman, J.

    1996-10-01

    A new class of inorganic ion exchangers called crystalline silicotitanates (CST) has been developed that exhibits very high selectivity for cesium and strontium in the highly alkaline radioactive wastes at the Hanford Site and other DOE sites. Tests have also shown that CSTs have high selectivity for cesium in acidic and neutral solutions. The ESP is supporting an effort at Sandia National Laboratories and Texas A & M University to further develop and characterize the important chemical and physical properties that will determine the applicability of CST to radioactive waste treatment at Hanford and other DOE facilities.

  7. Microbial accumulation of uranium, radium, and cesium

    SciTech Connect

    Strandberg, G.W.; Shumate, S.E. II; Parrott, J.R. Jr.; North, S.E.

    1981-05-01

    Diverse microbial species varied considerably in their ability to accumulate uranium, cesium, and radium. Mechanistic differences in uranium uptake by Saccharomyces cerevisiae and Pseudomonas aeruginosa were indicated. S. serevisiae exhibited a slow (hours) surface accumulation of uranium which was subject to environmental factors, while P. aeruginosa accumulated uranium rapidly (minutes) as dense intracellular deposits and did not appear to be affected by environmental parameters. Metabolism was not required for uranium uptake by either organism. Cesium and radium were concentrated to a considerably lesser extent than uranium by the several species tested.

  8. Removal of Radioactive Cesium Using Prussian Blue Magnetic Nanoparticles

    PubMed Central

    Jang, Sung-Chan; Hong, Sang-Bum; Yang, Hee-Man; Lee, Kune-Woo; Moon, Jei-Kwon; Seo, Bum-Kyoung; Huh, Yun Suk; Roh, Changhyun

    2014-01-01

    Radioactive cesium (137Cs) has inevitably become a human concern due to exposure from nuclear power plants and nuclear accident releases. Many efforts have been focused on removing cesium and the remediation of the contaminated environment. In this study, we elucidated the ability of Prussian blue-coated magnetic nanoparticles to eliminate cesium from radioactive contaminated waste. Thus, the obtained Prussian blue-coated magnetic nanoparticles were then characterized and examined for their physical and radioactive cesium adsorption properties. This Prussian blue-coated magnetic nanoparticle-based cesium magnetic sorbent can offer great potential for use in in situ remediation. PMID:28344255

  9. Neurological manifestation of methyl bromide intoxication.

    PubMed

    Suwanlaong, Kanokrat; Phanthumchinda, Kammant

    2008-03-01

    Methyl bromide is a highly toxic gas with poor olfactory warning properties. It is widely used as insecticidal fumigant for dry foodstuffs and can be toxic to central and peripheral nervous systems. Most neurological manifestations of methyl bromide intoxication occur from inhalation. Acute toxicity characterized by headache, dizziness, abdominal pain, nausea, vomiting and visual disturbances. Tremor, convulsion, unconsciousness and permanent brain damage may occur in severe poisoning. Chronic exposure can cause neuropathy, pyramidal and cerebellar dysfunction, as well as neuropsychiatric disturbances. The first case of methyl bromide intoxication in Thailand has been described. The patient was a 24-year-old man who worked in a warehouse of imported vegetables fumigated with methyl bromide. He presented with unstable gait, vertigo and paresthesia of both feet, for two weeks. He had a history of chronic exposure to methyl bromide for three years. His fourteen co-workers also developed the same symptoms but less in severity. Neurological examination revealed ataxic gait, decreased pain and vibratory sense on both feet, impaired cerebellar signs and hyperactive reflex in all extremities. The serum concentration of methyl bromide was 8.18 mg/dl. Electrophysilogical study was normal. Magnetic resonance imaging of the brain (MRI) revealed bilateral symmetrical lesion of abnormal hypersignal intensity on T2 and fluid-attenuation inversion recovery (FLAIR) sequences at bilateral dentate nuclei of cerebellum and periventricular area of the fourth ventricle. This incident stresses the need for improvement of worker education and safety precautions during all stages of methyl bromide fumigation.

  10. Cesium promotion in styrene epoxidation on silver catalysts.

    PubMed

    Zhou, Ling; Gorin, Craig F; Madix, Robert J

    2010-01-20

    The adsorption of a small amount of cesium on Ag(110) redirects the partial oxidation products of styrene from phenylacetaldehyde and phenylketene to styrene oxide. The cesium stabilizes the oxametallacycle intermediate and hinders its transformation to the intermediate that leads to the other products. Cesium does not appear to create any electronic effects on the bonding of the intermediates. Low coverages of cesium induce a (1 x 2) missing-row reconstruction of the entire clean Ag(110) surface and a (3 x 5) surface oxide structure on the cesium-reconstructed Ag(110) surface. This (3 x 5)-ordered surface oxide is superimposed on the Ag(111) microfacets produced by the cesium-induced reconstruction, which leads to selectivity and reactivity very similar to those of the extended (111) surface. These studies provide insight into the microscopic origins of the structural effects of cesium in styrene epoxidation on silver catalysts.

  11. Cesium vapor thermionic converter anomalies arising from negative ion emission

    NASA Astrophysics Data System (ADS)

    Rasor, Ned S.

    2016-08-01

    Compelling experimental evidence is given that a longstanding limit encountered on cesium vapor thermionic energy converter performance improvement and other anomalies arise from thermionic emission of cesium negative ions. It is shown that the energy that characterizes thermionic emission of cesium negative ions is 1.38 eV and, understandably, is not the electron affinity 0.47 eV determined for the photodetachment threshold of the cesium negative ion. The experimental evidence includes measurements of collector work functions and volt-ampere characteristics in quasi-vacuum cesium vapor thermionic diodes, along with reinterpretation of the classic Taylor-Langmuir S-curve data on electron emission in cesium vapor. The quantitative effects of negative ion emission on performance in the ignited, unignited, and quasi-vacuum modes of cesium vapor thermionic converter operation are estimated.

  12. Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide: II. Volumetric properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide.

    PubMed

    Harkot, Joanna; Jańczuk, Bronisław

    2009-02-15

    Density measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C(12)(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). On the basis of the obtained results of the measurements the CMC and partial molar volumes of the surfactants studied were also determined. The obtained CMC values were also analyzed with those accounted on the basis of the surface tension data from the previous paper [J. Harkot, B. Jańczuk, J. Colloid Interface Sci. (2008), submitted for publication]. The values of CMC determined from the surface tension and density measurements for C(12)(EDMAB) are equal to 9.9x10(-3) and 1.5x10(-2) M and for BDDAB to 5.25x10(-3) and 5.3x10(-3) M, respectively. These obtained values are very similar. However, in the literature it is difficult to find the CMC values for C(12)(EDMAB) and BDDAB determined by these two methods used by us-especially from the density measurements for BDDAB and surface tension measurements for C(12)(EDMAB). In the case of the apparent molar volumes of C(12)(EDMAB) there is a good agreement between the values obtained by us and those found in the literature. The CMC values for C(12)(EDMAB) and BDDAB were also determined on the basis of their surface tension and free energy of electrostatic interactions between the polar heads of these surfactants and compared with those obtained from the surface tension and density measurements. It was found that the theoretically obtained CMC values were close to those determined from the density and surface tension data for the C(12)(EDMAB) and that the ratios of the CMC values of the surfactants to their concentration at which the water surface tension decreased by about 20 mN/m proved that the presence of the aryl group in the BDDAB head instead of the methyl group caused that its micellization process was more inhibited in relation to its adsorption at air-water interface than that of C(12)(EDMAB).

  13. Scintillator handbook with emphasis on cesium iodide

    NASA Technical Reports Server (NTRS)

    Tidd, J. L.; Dabbs, J. R.; Levine, N.

    1973-01-01

    This report provides a background of reasonable depth and reference material on scintillators in general. Particular attention is paid to the cesium iodide scintillators as used in the High Energy Astronomy Observatory (HEAO) experiments. It is intended especially for use by persons such as laboratory test personnel who need to obtain a working knowledge of these materials and their characteristics in a short time.

  14. Cesium and Strontium Separation Technologies Literature Review

    SciTech Connect

    T. A. Todd; T. A. Todd; J. D. Law; R. S. Herbst

    2004-03-01

    Integral to the Advanced Fuel Cycle Initiative (AFCI) Program’s proposed closed nuclear fuel cycle, the fission products cesium and strontium in the dissolved spent nuclear fuel stream are to be separated and managed separately. A comprehensive literature survey is presented to identify cesium and strontium separation technologies that have the highest potential and to focus research and development efforts on these technologies. Removal of these high-heat-emitting fission products reduces the radiation fields in subsequent fuel cycle reprocessing streams and provides a significant short-term (100 yr) heat source reduction in the repository. This, along with separation of actinides, may provide a substantial future improvement in the amount of fuel that could be stored in a geologic repository. The survey and review of the candidate cesium and strontium separation technologies are presented herein. Because the AFCI program intends to manage cesium and strontium together, technologies that simultaneously separate both elements are of the greatest interest, relative to technologies that separate only one of the two elements.

  15. Distribution of radioactive cesium and stable cesium in cattle kept on a highly contaminated area of Fukushima nuclear accident.

    PubMed

    Sato, Itaru; Okada, Keiji; Sasaki, Jun; Chida, Hiroyuki; Satoh, Hiroshi; Miura, Kiyoshi; Kikuchi, Kaoru; Otani, Kumiko; Sato, Shusuke

    2015-07-01

    Radioactivity inspection of slaughtered cattle is generally conducted using a portion of the neck muscle; however, there is limited information about the distribution of radioactive cesium in cattle. In this study, therefore, we measured not only radioactive cesium but also stable cesium in various tissues of 19 cattle that had been kept in the area highly contaminated by the Fukushima nuclear accident. Skeletal muscles showed approximately 1.5-3.0 times higher concentration of radioactive cesium than internal organs. Radioactive cesium concentration in the tenderloin and top round was about 1.2 times as high as that in the neck muscle. The kidney showed the highest concentration of radioactive cesium among internal organs, whereas the liver was lowest. Radioactive cesium concentration in the blood was about 8% of that in the neck muscle. Characteristics of stable cesium distribution were almost the same as those of radioactive cesium. Correlation coefficient between radioactive cesium and stable cesium in tissues of individual cattle was 0.981 ± 0.012. When a suspicious level near 100 Bq/kg is detected in the neck of slaughtered cattle, re-inspection should be conducted using a different region of muscle, for example top round, to prevent marketing of beef that violates the Food Sanitation Act.

  16. Composition and process for separating cesium ions from an acidic aqueous solution also containing other ions

    DOEpatents

    Dietz, Mark L.; Horwitz, E. Philip; Bartsch, Richard A.; Barrans, Jr., Richard E.; Rausch, David

    1999-01-01

    A crown ether cesium ion extractant is disclosed as is its synthesis. The crown ether cesium ion extractant is useful for the selective purification of cesium ions from aqueous acidic media, and more particularly useful for the isolation of radioactive cesium-137 from nuclear waste streams. Processes for isolating cesium ions from aqueous acidic media using the crown ether cesium extractant are disclosed as are processes for recycling the crown ether cesium extractant and processes for recovering cesium from a crown ether cesium extractant solution.

  17. Composition and process for separating cesium ions from an acidic aqueous solution also containing other ions

    DOEpatents

    Dietz, M.L.; Horwitz, E.P.; Bartsch, R.A.; Barrans, R.E. Jr.; Rausch, D.

    1999-03-30

    A crown ether cesium ion extractant is disclosed as is its synthesis. The crown ether cesium ion extractant is useful for the selective purification of cesium ions from aqueous acidic media, and more particularly useful for the isolation of radioactive cesium-137 from nuclear waste streams. Processes for isolating cesium ions from aqueous acidic media using the crown ether cesium extractant are disclosed as are processes for recycling the crown ether cesium extractant and processes for recovering cesium from a crown ether cesium extractant solution. 4 figs.

  18. Growth and characterization of lead bromide crystals

    NASA Technical Reports Server (NTRS)

    Singh, N. B.; Gottlieb, M.; Henningsen, T.; Hopkins, R. H.; Mazelsky, R.; Glicksman, M. E.; Coriell, S. R.; Santoro, G. J.; Duval, W. M. B.

    1992-01-01

    Lead(II) bromide was purified by a combination of directional freezing and zone-refining methods. Differential thermal analysis of the lead bromide showed that a destructive phase transformation occurs below the melting temperature. This transformation causes extensive cracking, making it very difficult to grow a large single crystal. Energy of phase transformation for pure lead bromide was determined to be 24.67 cal/g. To circumvent this limitation, crystals were doped by silver bromide which decreased the energy of phase transformation. The addition of silver helped in achieving the size, but enhanced the inhomogeneity in the crystal. The acoustic attenuation constant was almost identical for the pure and doped (below 3000 ppm) crystals.

  19. Emission of methyl bromide from biomass burning

    SciTech Connect

    Manoe, S.; Andreae, M.O. )

    1994-03-04

    Bromine is, per atom, far more efficient than chlorine in destroying stratospheric ozone, and methyl bromide is the single largest source of stratospheric bromine. The two main previously known sources of this compound are emissions from the ocean and from the compound's use as an agricultural pesticide. Laboratory biomass combustion experiments showed that methyl bromide was emitted in the smoke from various fuels tested. Methyl bromide was also found in smoke plumes from wildfires in savannas, chaparral, and boreal forest. Global emissions of methyl bromide from biomass burning are estimated to be in the range of 10 to 50 gigagrams per year, which is comparable to the amount produced by ocean emission and pesticide use and represents a major contribution ([approximately]30 percent) to the stratospheric bromine budget.

  20. Matrix Elimination Ion Chromatography Method for the Determination of Trace Levels of Anionic Impurities in High Purity Cesium Iodide

    PubMed Central

    Ayushi; Kumar, Sangita D.; Reddy, A.V.R.

    2012-01-01

    In the present study an ion chromatographic method based on matrix elimination has been developed for the determination of anionic impurities in high purity cesium iodide crystals. The presence of impurities has a detrimental effect on the characteristics of detectors based on cesium iodide crystals. In particular, oxygen-containing anions inhibit the resolving power of scintillators and decrease the optical absorption. The quantitative determination of anions (fluoride, chloride, bromide, nitrate, phosphate, and sulphate) simultaneously in the high-purity cesium iodide crystals has not been carried out before. The large concentration of iodide poses a challenge in the determination of anions (especially phosphate and sulphate); hence, matrix elimination is accomplished by adopting a sample pretreatment technique. The method is validated for linearity, accuracy, and precision. The limit of detection for different anions is in the range of 0.3–3 µg/g, and the relative standard deviation is in the range of 4–6% for the overall method. PMID:22291061

  1. Nano-Cesium for Anti-Cancer Properties: An Investigation into Cesium Induced Metabolic Interference.

    PubMed

    Daza, Enrique A; Misra, Santosh K; Schwartz-Duval, Aaron S; Ohoka, Ayako; Miller, Callie; Pan, Dipanjan

    2016-10-03

    The use of cesium chloride (CsCl) for cancer therapy ("high pH therapy") has been theorized to produce anticancer properties by raising intracellular pH to induce apoptosis. Although considered as "alternative medicine", little scientific evidence supports this theory. Alternatively, cells have no cesium ion (Cs(+)) mediated channels for clearance. Thus, such unstable electrochemical distributions have the severe potential to disrupt electrochemical dependent cellular processes, such as glucose cotransporters. Hence, a detailed investigation of pH changing effects and glucose uptake inhibition are warranted as a possible cesium-induced anticancer therapy. We developed and characterized cesium nanoparticles (38 ± 6 nm), termed NanoCs, for nanoparticle-mediated internalization of the ion, and compared its treatment to free CsCl. Our investigations suggest that neither NanoCs nor CsCl drastically changed the intracellular pH, negating the theory. Alternatively, NanoCs lead to a significant decrease in glucose uptake when compared to free CsCl, suggesting cesium inhibited glucose uptake. An apoptosis assay of observed cell death affirms that NanoCs leads tumor cells to initiate apoptosis rather than follow necrotic behavior. Furthermore, NanoCs lead to in vivo tumor regression, where H&E analysis confirmed apoptotic cell populations. Thus, NanoCs performed pH-independent anticancer therapy by inducing metabolic stasis.

  2. Cesium titanium silicate and method of making

    DOEpatents

    Balmer, Mari L.

    1997-01-01

    The invention is the new material, a ternary compound of cesium, silica, and titania, together with a method of making the ternary compound, cesium titanium silicate pollucite. More specifically, the invention is Cs.sub.2 Ti.sub.2 Si.sub.4 O.sub.13 pollucite which is a new crystalline phase representing a novel class of Ti-containing zeolites. Compositions contain relatively high Cs.sub.2 O and TiO.sub.2 loadings and are durable glass and ceramic materials. The amount of TiO.sub.2 and Cs.sub.2 that can be incorporated into these glasses and crystalline ceramics far exceeds the limits set for the borosilicate high level waste glass.

  3. Cesium titanium silicate and method of making

    DOEpatents

    Balmer, M.L.

    1997-01-07

    The invention is the new material, a ternary compound of cesium, silica, and titania, together with a method of making the ternary compound, cesium titanium silicate pollucite. More specifically, the invention is Cs{sub 2}Ti{sub 2}Si{sub 4}O{sub 13} pollucite which is a new crystalline phase representing a novel class of Ti-containing zeolites. Compositions contain relatively high Cs{sub 2}O and TiO{sub 2} loadings and are durable glass and ceramic materials. The amount of TiO{sub 2} and Cs{sub 2} that can be incorporated into these glasses and crystalline ceramics far exceeds the limits set for the borosilicate high level waste glass. 10 figs.

  4. The status of cesium beam frequency standards

    NASA Technical Reports Server (NTRS)

    Cutler, Leonard S.

    1990-01-01

    There has been a lot of progress in cesium beam frequency standards in the last few years some of which will be reported here. Optical pumping is being pursued actively in a number of laboratories. Optically slowed and cooled beams have been demonstrated as well as traps for cold neutral atoms. The microwave cavity performance with regard to local phase shift at the beam holes was improved by use of carefully designed and built ring structures for the cavity ends. Work is being done on improvements in electronics with some emphasis on use of digital circuitry and microprocessors. The frequency pulling due to microwave Delta M = +/- 1 transitions (Ramsey pulling) was analyzed and shown to be important. Status of cesium beam frequency standards in some of the laboratories as well as some of the commercial work is discussed. Optical pumping and detection are discussed.

  5. Murine immunization by cesium-137 irradiation attenuated Schistosoma mansoni cercariae

    SciTech Connect

    Stek, M. Jr.; Minard, P.; Cruess, D.F.

    1984-06-01

    Cesium-137, becoming a more readily available ionizing gamma radiation source for laboratory use, was shown to effectively attenuate Schistosoma mansoni cercariae for vaccine production. In parallel comparison studies with the murine model, cesium-137 attenuated cercariae consistently afforded better protection than did the cobalt-60 prepared vaccine. Dose-response data indicated that the optimal total irradiation with cesium-137 was between 45 and 50 Krad.

  6. Cesium Atomic Fountain Clocks at NMIJ

    DTIC Science & Technology

    2010-11-01

    Wynands and S. Weyers, 2005, “Atomic fountain clocks,” Metrologia , 42, S64-S79. [2] M. Takamoto, F. L. Hong, R. Higashi, et al., 2005, “An optical...beam of laser-cooled cesium atoms,” Physical Review, A 60, R4241-R4244. [13] V. Gerginov, N. Nemitz, S. Weyers, et al., 2010, “Uncertainty evaluation of the caesium fountain clock PTB-CSF2,” Metrologia , 47, 65-79.

  7. Cesium legacy safety project management work plan

    SciTech Connect

    Durham, J.S.

    1998-04-21

    This Management Work Plan (MWP) describes the process flow, quality assurance controls, and the Environment, Safety, and Health requirements of the Cesium Legacy Safety Project. This MWP provides an overview of the project goals and methods for repackaging the non-conforming Type W overpacks and packaging the CsCl powder and pellets. This MWP is not intended to apply to other activities associated with the CsCl Legacy Safety Program (i.e., clean out of South Cell).

  8. Lanthanide doped strontium-barium cesium halide scintillators

    DOEpatents

    Bizarri, Gregory; Bourret-Courchesne, Edith; Derenzo, Stephen E.; Borade, Ramesh B.; Gundiah, Gautam; Yan, Zewu; Hanrahan, Stephen M.; Chaudhry, Anurag; Canning, Andrew

    2015-06-09

    The present invention provides for a composition comprising an inorganic scintillator comprising an optionally lanthanide-doped strontium-barium, optionally cesium, halide, useful for detecting nuclear material.

  9. A Cesium Beam Frequency Standard with Microprocessor Control,

    DTIC Science & Technology

    Frequency, *Control, *Symposia, *Electron beams, *Cesium, *Microprocessors, Laboratory tests, Frequency standards, Performance(Engineering), Reliability, Time , State of the art, Computers, Data acquisition

  10. Surface interactions of cesium and boric acid with stainless steel

    SciTech Connect

    Grossman-Canfield, N.

    1995-08-01

    In this report, the effects of cesium hydroxide and boric acid on oxidized stainless steel surfaces at high temperatures and near one atmosphere of pressure are investigated. This is the first experimental investigation of this chemical system. The experimental investigations were performed using a mass spectrometer and a mass electrobalance. Surfaces from the different experiments were examined using a scanning electron microscope to identify the presence of deposited species, and electron spectroscopy for chemical analysis to identify the species deposited on the surface. A better understanding of the equilibrium thermodynamics, the kinetics of the steam-accelerated volatilizations, and the release kinetics are gained by these experiments. The release rate is characterized by bulk vaporization/gas-phase mass transfer data. The analysis couples vaporization, deposition, and desorption of the compounds formed by cesium hydroxide and boric acid under conditions similar to what is expected during certain nuclear reactor accidents. This study shows that cesium deposits on an oxidized stainless steel surface at temperatures between 1000 and 1200 Kelvin. Cesium also deposits on stainless steel surfaces coated with boric oxide in the same temperature ranges. The mechanism for cesium deposition onto the oxide layer was found to involve the chemical reaction between cesium and chromate. Some revaporization in the cesium hydroxide-boric acid system was observed. It has been found that under the conditions given, boric acid will react with cesium hydroxide to form cesium metaborate. A model is proposed for this chemical reaction.

  11. Hydrogen masers and cesium fountains at NRC

    NASA Technical Reports Server (NTRS)

    Boulanger, J.-S.; Morris, D.; Douglas, R. J.; Gagne, M.-C.

    1994-01-01

    The NRC masers H-3 and H-4 have been operating since June 1993 with cavity servo control. These low-flux active H masers are showing stabilities of about 10(exp -15) from 1 hour to several days. Stability results are presented, and the current and planned uses of the masers are discussed. A cesium fountain primary frequency standard project has been started at NRC. Trapping and launching experiments with the goal of 7 m/s launches are beginning. We discuss our plans for a local oscillator and servo that exploit the pulsed aspect of cesium fountain standards, and meet the challenge of 10(exp -14) tau(exp -1/2) stability without requiring masers. At best, we expect to run this frequency standard initially for periods of hours each working day rather than continuously for years, and so frequency transfer to outside laboratories has been carefully considered. We conclude that masers (or other even better secondary clocks) are required to exploit this potential accuracy of the cesium fountain. We present and discuss our conclusion that it is feasible to transfer frequency in this way with a transfer-induced uncertainty of less than 10(exp -15), even in the presence of maser frequency drift and random walk noise.

  12. Direct Grout Stabilization of High Cesium Salt Waste: Cesium Leaching Studies

    SciTech Connect

    Langton, C.A.

    1999-09-19

    'The direct grout alternative is a viable option for treatment/stabilization and disposal of salt waste containing Cs-137 concentrations of 1-3 Ci/gal. The significant difference between these waste solutions is that the high cesium salt solution will contain between 1 and 3 Curies of Cs-137 per gallon compared to a negligible amount in the current salt solution. This difference will require special engineering and shielding for a direct grout processing facility and disposal units to achieve acceptable radiation exposure conditions. The higher cesium concentrations in the direct grout also require that the cesium leaching be evaluated as a function of curing temperature. ANS 16.1 leaching results and distribution ratios (approximations of distribution coefficients) as a function of temperature are presented in this report.'

  13. Laser excited fluorescence in the cesium-xenon excimer and the cesium dimer

    NASA Technical Reports Server (NTRS)

    Exton, R. J.; Snow, W. L.; Hillard, M. E.

    1978-01-01

    Argon ion laser lines are used to excite fluorescence in a mixture of cesium and xenon. Excimer band fluorescence is observed at higher pressures (about 1 atm) while at lower pressures (several torr) a diffuse fluorescence due to the cesium dimer is observed whose character changes with exciting wavelength. The excimer fluorescence is shown to be directly related to the location of the exciting wavelength within previously measured Cs/Xe line shapes. This fact suggests that the excimer systems may be efficiently pumped through these line shapes. Qualitative energy-level schemes are proposed to explain the observations in both the excimer and dimer systems.

  14. Reactions of Tributylstannyl Anioniods with Alkyl Bromides.

    DTIC Science & Technology

    1981-09-28

    g (12 mmol) of cesium tert-butoxide was added to the reaction vessel before the addition of n-butyllithium. Alkylation of Tributylstannyl Anionoids...Dry reaction vessels were purged with argon. The desired alkyl halide (1.0 mmol unless noted) and any desired additive were added to the reaction ...OFFICE OF NAVAL RESEARCH Contract N00014-79-C-0584 Task No. NR 053-714 TECHNICAL REPORT No. 2 Reactions of Tributylstannyl Anionoids with Alkyl

  15. Variation in available cesium concentration with parameters during temperature induced extraction of cesium from soil.

    PubMed

    Parajuli, Durga; Takahashi, Akira; Tanaka, Hisashi; Sato, Mutsuto; Fukuda, Shigeharu; Kamimura, Ryuichi; Kawamoto, Tohru

    2015-02-01

    Cesium extraction behavior of brown forest type soil collected from paddy fields in Fukushima nuclear accident affected areas was studied. In nitric acid or sulfuric acid solutions at elevated temperature, the concentration of Cs in soil available for extraction, m0, has been estimated on the basis of modified canonical equation and the equations derived from assumed equilibria. With the variation in temperature, mixing time, and soil to solvent ratio, the observed m0 values in 0.5 M acid solution ranged between 1.5 and 2.9 mg cesium per kilogram of soil. By increasing the acid concentration to 3 M, the value of m0 could be sharply increased to 5.1 mg/kg even at 95 °C. This variation in the extractable concentration of cesium with the parameters signifies the existence of different binding sites in the soil matrix. The results observed for uncontaminated sample could be reproduced with the radioactive cesium contaminated sample belonging to the same soil group.

  16. [Concentrations of radioactive cesium in different cuts of beef].

    PubMed

    Nabeshi, Hiromi; Kikuchi, Hiroyuki; Tsutsumi, Tomoaki; Hachisuka, Akiko; Matsuda, Rieko

    2013-01-01

    After the Fukushima No. 1 Nuclear Power Plant accident, high levels of radioactive cesium were detected in beef. Many prefectural governments decided to conduct blanket tests on meat from local beef cattle to prevent distribution of beef contaminated with radioactive cesium exceeding the provisional regulation value. In some cases, different concentrations of radioactive cesium were found in different cuts of beef from the same cows. These results raised questions about the reliability of the test results. Here, we investigated the reason for the differences in radioactive cesium concentration in different cuts of beef from the same cows. The concentrations of radioactive cesium in five different parts cuts of beef from three cows were negatively correlated with fat content, suggesting that the difference in radioactive cesium concentration is due to differences in fat content in the meat. In addition, our results showed that the concentration of radioactive cesium in muscle was more than 7-fold higher than that in fat in the same cow. These results suggested that it is necessary to use muscle for testing of radioactive cesium in cows.

  17. Cesium-associated hypokalemia successfully treated with amiloride.

    PubMed

    Horn, Sarah; Naidus, Elliot; Alper, Seth L; Danziger, John

    2015-06-01

    Self-treatment of cancer with cesium chloride, despite proven lack of efficacy, continues to produce serious adverse effects. Among these is hypokalemia predisposing to life-threatening arrhythmia. The mechanism of cesium-associated hypokalemia (CAH) has not been described. We report urinary potassium wasting responsive to amiloride therapy in a cancer patient with CAH, and discuss possible mechanisms.

  18. Coherent 455 nm beam production in a cesium vapor.

    PubMed

    Schultz, J T; Abend, S; Döring, D; Debs, J E; Altin, P A; White, J D; Robins, N P; Close, J D

    2009-08-01

    We observe coherent, cw, 455 nm blue-beam production via frequency upconversion in cesium vapor. Two IR lasers induce strong double excitation in a heated cesium vapor cell, allowing the atoms to undergo a double cascade and produce a coherent, collimated, blue beam copropagating with the two IR pump lasers.

  19. Distillation device supplies cesium vapor at constant pressure

    NASA Technical Reports Server (NTRS)

    Basiulis, A.; Shefsiek, P. K.

    1968-01-01

    Distillation apparatus in the form of a U tube supplies small amounts of pure cesium vapor at constant pressure to a thermionic converter. The upstream leg of the U tube is connected to a vacuum pump to withdraw noncondensable impurities, the bottom portion serves as a reservoir for the liquid cesium.

  20. Hanford single shell tank saltcake cesium removal test plan

    SciTech Connect

    Duncan, J.B., Westinghouse Hanford

    1996-12-11

    This document provides the test preparation and conduct of a cesium removal test using Hanford Single Shell Tank Saltcake from tanks 241-BY-110, 241-U-108, 241 U 109, 241-A-101, and 241-S-102 in a benchscale column. The cesium sorbent to be tested is crystalline silicotitanate

  1. Hanford tank waste supernatant cesium removal test plan

    SciTech Connect

    Hendrickson, D.W., Westinghouse Hanford

    1996-05-31

    This document provides the test plan for the preparation and conduct of a cesium removal test using Hanford DSSF supernatant liquor from tank 241-AW-101 in a bench-scale column. Cesium sorbents to be tested include resorcinol-formaldehyde resin and crystalline silicotitanate.

  2. Strontium-90 and cesium-137 distribution in Baltic Sea waters

    SciTech Connect

    Lazarev, L.N.; Gedeonov, L.I.; Ivanova, L.M.; Stepanov, A.V.

    1988-09-01

    The strontium-90 and cesium-137 concentrations determined in 1983 in the Baltic Sea proper and the Gulf of Finland and in the Soviet Baltic rivers are furnished. The cesium-137 content has been found to be directly proportional to the salinity of the water. Significant influx of technogenic radioactive contaminants from the North to the Baltic Sea was noted in 1983.

  3. METHYL BROMIDE ALTERNATIVES FOR CALIFORNIA STRAWBERRY NURSERIES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of methyl bromide (MB) alternative fumigants on soil pests, plant productivity in nursery and fruiting fields, as well as production costs, were evaluated in California strawberry nurseries by an interdisciplinary team. Our trials followed nursery stock through low and high elevation ph...

  4. Methyl bromide emissions from tarped fields

    SciTech Connect

    Cicerone, R.J.; Williams, J.; Wang, N.Y.

    1995-12-31

    Once in the stratosphere, bromine atoms can destroy ozone effectively. Because of this potential effect, certain organobromine compounds including methyl bromide (MeBr) are being controlled or eliminated by national and international regulations. It would be valuable to determine the fraction of MeBr used in soil fumigations that subsequently enters the atmosphere to better assess the need for, and value of, strong regulations. We have designed and conducted several experiments accompanying field fumigations with MeBr/chloropicrin mixtures. In each of three field-fumigation experiments new Irvine, CA in which the fumigated field was covered immediately with plastic tarping, we have deployed static flux chambers on top of the tarping and measured escape fluxes of MeBr. After tarp removal, the same chambers were replaced on the bare soil to continue the measurements. We have also measured soil bromide contents before and after the fumigation. One experiment yielded an escape fraction of 80 to 87% (with 19% remaining as bromide) while the other two experiments yielded escape fractions of 30 to 35% (with about 70% remaining as bromide). This paper will summarize stratospheric bromine chemistry, describe the field experiments and discuss factors that influence emissions, including soil pH, moisture and organic content and injection technique. We acknowledge TriCal, Inc. for many helpful discussions and for professional field applications of MeBr.

  5. Cherry angiomas associated with exposure to bromides.

    PubMed

    Cohen, A D; Cagnano, E; Vardy, D A

    2001-01-01

    Cherry angiomas are the most common vascular proliferation; however, little is known about the pathogenesis and etiology of these lesions. We present two laboratory technicians who were exposed to brominated compounds for prolonged periods and who developed multiple cherry angiomas on the trunk and extremities. We suggest that the association between exposure to bromides and cherry angiomas should be investigated by a controlled study.

  6. Methyl Bromide Investigation Expands to Puerto Rico

    EPA Pesticide Factsheets

    (New York, N.Y.) The U.S. Environmental Protection Agency, working with the Virgin Islands government, is investigating the March 2015 incident involving the use of a pesticide containing methyl bromide to fumigate a residence at the Sirenusa apartments on

  7. A combined cesium-strontium extraction/recovery process

    SciTech Connect

    Horwitz, E.P.; Dietz, M.L.; Jensen, M.P.

    1996-03-01

    A new solvent extraction process for the simultaneous extraction of cesium and strontium from acidic nitrate media is described. This process uses a solvent formulation comprised of 0.05 M di-t-butylcyclohexano-18-crown-6 (DtBuCH18C6), 0.1 M Crown 100{prime} (a proprietary, cesium-selective derivative of dibenzo-18-crown-6), 1.2 M tributyl phosphate (TBP), and 5% (v/v) lauryl nitrile in an isoparaffinic hydrocarbon diluent. Distribution ratios for cesium and strontium from 4 M nitric acid are 4.13 and 3.46, respectively. A benchtop batch countercurrent extraction experiment indicates that >98% of the cesium and strontium initially present in the feed solution can be removed in only four extraction stages. Through proper choice of extraction and strip conditions, extracted cesium and strontium can be recovered either together or individually.

  8. [Biochemical changes in rats under the influence of cesium chloride].

    PubMed

    Mel'nykova, N M; Iermishev, O V

    2013-01-01

    Cesium is lately accumulated actively in the environment, but its influence on human and animal organism is the least studied among heavy metals. It is shown that the action of cesium chloride in rats caused significant changes in blood chemistry, which are characterized by a decrease of total protein content, pH, an increase in the level of urea, creatinine, glucose and total hemoglobin. The results showed that potassium content in all the studied organs and tissues of poisoned rats decreases under the action of cesium chloride. Histological examination of the heart tissue in rats poisoned with cesium chloride indicates the onset of pathology of cardiovascular system. It was found out that use of the drug "Asparkam" reduces the negative effect of cesium chloride on the body of rats.

  9. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, Candido

    1999-01-01

    A method for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700.degree. C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite.

  10. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, C.

    1999-02-23

    A method is described for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method is described for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700 C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite. 3 figs.

  11. Investigations of negative and positive cesium ion species

    NASA Technical Reports Server (NTRS)

    Chanin, L. M.

    1978-01-01

    A direct test is provided of the hypothesis of negative ion creation at the anode or collector of a diode operating under conditions simulating a cesium thermionic converter. The experimental technique involves using direct ion sampling through the collector electrode with mass analysis using a quadrupole mass analyzer. Similar measurements are undertaken on positive ions extracted through the emitter electrode. Measurements were made on a variety of gases including pure cesium, helium-cesium mixtures and cesium-hydrogen as well as cesium-xenon mixtures. The gas additive was used primarily to aid in understanding the negative ion formation processes. Measurements were conducted using emitter (cathode) temperatures up to about 1000 F. The major negative ion identified through the collector was Cs(-) with minor negative ion peaks tentatively identified as H(-), H2(-), H3(-), He(-) and a mass 66. Positive ions detected were believed to be Cs(+), Cs2(+) and Cs3(+).

  12. Cleaning Cesium Radionuclides from BN-350 Primary Sodium

    SciTech Connect

    Romanenko, O.G.; Allen, K.J.; Wachs, D.M.; Planchon, H.P.; Wells, P.B.; Michelbacher, J.A.; Nazarenko, P.; Dumchev, I.; Maev, V.; Zemtzev, B.; Tikhomirov, L.; Yakovlev, V.; Synkov, A

    2005-04-15

    This paper reports the successful design and operation of a system to remove highly radioactive cesium from the sodium coolant of the BN-350 reactor in Aktau, Kazakhstan. As an international effort between the United States and the Republic of Kazakhstan, a cesium-trapping system was jointly designed, fabricated, installed, and successfully operated. The results are significant for a number of reasons, including (a) a significant reduction of radioactivity levels of the BN-350 coolant and reactor surfaces, thereby reducing exposure to workers during shutdown operations; (b) demonstration of scientific ideas; and (c) the engineering application of effective cesium trap deployment for commercial-sized liquid-metal reactors. About 255 300 GBq (6900 Ci) of cesium was trapped, and the {sup 137}Cs specific activity in BN-350 primary sodium was decreased from 296 MBq/kg (8000 {mu}Ci/kg) to 0.37 MBq/kg (10 {mu}Ci/kg) by using seven cesium traps containing reticulated vitreous carbon (RVC) as the cesium adsorbent. Cesium trapping was accomplished by pumping sodium from the primary circuit, passing it through a block of RVC within each trap, and returning the cleaned sodium to the primary circuit. Both to predict and to analyze the behavior of the cesium traps in the BN-350 reactor primary circuit, a model was developed that satisfactorily describes the observed results of the cesium trapping. By using this model, thermodynamic parameters, such as the heat of adsorption of cesium atoms on RVC and on internal piping surfaces of the BN-350 reactor primary circuit, -22.7 and -5.0 kJ/mole, respectively, were extracted from the experimental data.

  13. Plutonium and Cesium Colloid Mediated Transport

    NASA Astrophysics Data System (ADS)

    Boukhalfa, H.; Dittrich, T.; Reimus, P. W.; Ware, D.; Erdmann, B.; Wasserman, N. L.; Abdel-Fattah, A. I.

    2013-12-01

    Plutonium and cesium have been released to the environment at many different locations worldwide and are present in spent fuel at significant levels. Accurate understanding of the mechanisms that control their fate and transport in the environment is important for the management of contaminated sites, for forensic applications, and for the development of robust repositories for the disposal of spent nuclear fuel and nuclear waste. Plutonium, which can be present in the environment in multiple oxidations states and various chemical forms including amorphous oxy(hydr)oxide phases, adsorbs/adheres very strongly to geological materials and is usually immobile in all its chemical forms. However, when associated with natural colloids, it has the potential to migrate significant distances from its point of release. Like plutonium, cesium is not very mobile and tends to remain adhered to geological materials near its release point, although its transport can be enhanced by natural colloids. However, the reactivity of plutonium and cesium are very different, so their colloid-mediated transport might be significantly different in subsurface environments. In this study, we performed controlled experiments in two identically-prepared columns; one dedicated to Pu and natural colloid transport experiments, and the other to Cs and colloid experiments. Multiple flow-through experiments were conducted in each column, with the effluent solutions being collected and re-injected into the same column two times to examine the persistence and scaling behavior of the natural colloids, Pu and Cs. The data show that that a significant fraction of colloids were retained in the first elution through each column, but the eluted colloids collected from the first run transported almost conservatively in subsequent runs. Plutonium transport tracked natural colloids in the first run but deviated from the transport of natural colloids in the second and third runs. Cesium transport tracked natural

  14. [Surveillance of radioactive cesium in foods].

    PubMed

    Nabeshi, Hiromi; Tsutsumi, Tomoaki; Ikarashi, Atsuko; Hachisuka, Akiko; Matsuda, Rieko

    2013-01-01

    We surveyed foods on the market from areas that had been exposed to radioactive materials contamination following the Fukushima accident. We used a NaI (Tl) scintillation spectrometer for the screening tests and a germanium semiconductor detector for the final tests. Test results from 1,427 samples showed that 6 samples (0.4%) exceeded the regulatory limit of 500 Bq/kg. Considering the detection rate of radioactive cesium in each food category, we suggest that it is necessary to continue monitoring fruits such as chestnuts and ginkgo nuts, mushrooms (especially raw wood-shiitake), mountain vegetables, and sea fish.

  15. Negative and positive cesium ion studies

    NASA Technical Reports Server (NTRS)

    Kuehn, D. G.; Sutliff, D. E.; Chanin, L. M.

    1978-01-01

    Mass spectrometric analyses have been performed on the positive and negative species from discharges in Cs, He-Cs, and He-H2-Cs mixtures. Sampling was conducted through the electrodes of normal glow discharges and from close-spaced heated-cathode conditions, which approximate a cesium thermionic converter. No negative Cs ions were observed for Cs pressures less than .01 torr. Identified species included Cs(+), Cs2(+), Cs(-), and what appeared to be multiply charged ions. Low-mass negative and positive ions attributed to H2 were observed when an He-H2 mixture was also present in the discharge region.

  16. Flow injection determination of bromide ion in a developer using bromide ion-selective electrode detector.

    PubMed

    Masadome, T; Asano, Y; Nakamura, T

    1999-10-01

    A potentiometric flow injection determination method for bromide ion in a developer was proposed, by utilizing a flow-through type bromide ion-selective electrode detector. The sensing membrane of the electrode was Ag(2)S-AgBr membrane. The response of the electrode detector as a peak-shape signal was obtained for injected bromide ion in a developer. A linear relationship was found to exist between peak height and the concentration of the bromide ion in a developer in a concentration range from 1.0x10(-3) to 1.0x10(-2) mol l(-1). The relative standard deviation for 10 injections of a 6x10(-3) mol l(-1) bromide ion in a developer was 1.3% and the sampling rate was ca 17-20 samples h(-1). The present method was free from the interference of an organic reducing reagent, an organic substance in a developer sample solution for the determination of bromide ion in a developer.

  17. Cesium accumulation of Rhodococcus erythropolis CS98 strain immobilized in hydrogel matrices.

    PubMed

    Takei, Takayuki; Yamasaki, Mika; Yoshida, Masahiro

    2014-04-01

    Agarose gels were superior to calcium-alginate gels for immobilizing Rhodococcus erythropolis CS98 strain to remove cesium from water. Suitable incubation time of the immobilized cells in cesium solutions, cell number in the gels and volume ratio of the cesium solution to the gels for efficient cesium removal were identified.

  18. Marking cabbage looper (Lepidoptera: Noctuidae) with cesium

    SciTech Connect

    Moss, J.I.; Van Steenwyk, R.A.

    1984-04-01

    Cabbage loopers (CL), Trichoplusia ni (Huebner), adults reared on artificial diet containing 1 x 10/sup -2/ M and 1 x 10/sup -3/ M CsCl were marked with cesium (Cs) which could be detected by atomic absorption spectrophotometry. The cesium marks from the 10/sup -2/ M CsCl diet were sufficient to last the expected lifetime of the insects. CL reared on diet containing 1 x 10/sup -1/ M CsCl did not survive. Unmarked females mated to males reared on artificial diet containing 1 x 10/sup -2/ M and 1 x 10/sup -3/ M CsCl were marked. CL reared on cotton plants sprayed with Cs solutions of 1000, 5000, and 10,000 ..mu..g/ml were marked sufficiently to last the expected lifetime of the insect. CL adults exposed for 72 h to cotton plants sprayed with Cs solutions of 1000, 5000, and 10,000 ..mu..g/ml were marked sufficiently to last the expected lifetime of the insect. CL adults reared from field cotton plants sprayed with CsCl solutions at rates of 1.24, 2.47, and 4.94 kg of CsCl per ha were marked. 12 references, 1 figure, 5 tables.

  19. Intense non-relativistic cesium ion beam

    SciTech Connect

    Lampel, M.C.

    1984-02-01

    The Heavy Ion Fusion group at Lawrence Berkeley Laboratory has constructed the One Ampere Cesium Injector as a proof of principle source to supply an induction linac with a high charge density and high brightness ion beam. This is studied here. An electron beam probe was developed as the major diagnostic tool for characterizing ion beam space charge. Electron beam probe data inversion is accomplished with the EBEAM code and a parametrically adjusted model radial charge distribution. The longitudinal charge distribution was not derived, although it is possible to do so. The radial charge distribution that is derived reveals an unexpected halo of trapped electrons surrounding the ion beam. A charge fluid theory of the effect of finite electron temperature on the focusing of neutralized ion beams (Nucl. Fus. 21, 529 (1981)) is applied to the problem of the Cesium beam final focus at the end of the injector. It is shown that the theory's predictions and assumptions are consistent with the experimental data, and that it accounts for the observed ion beam radius of approx. 5 cm, and the electron halo, including the determination of an electron Debye length of approx. 10 cm.

  20. Thermionic converter with differentially heated cesium-oxygen source and method of operation

    DOEpatents

    Rasor, Ned S.; Riley, David R.; Murray, Christopher S.; Geller, Clint B.

    2000-01-01

    A thermionic converter having an emitter, a collector, and a source of cesium vapor is provided wherein the source of cesium vapor is differentially heated so that said source has a hotter end and a cooler end, with cesium vapor evaporating from said hotter end into the space between the emitter and the collector and with cesium vapor condensing at said cooler end. The condensed cesium vapor migrates through a porous element from the cooler end to the hotter end.

  1. Adsorption of cesium on cement mortar from aqueous solutions.

    PubMed

    Volchek, Konstantin; Miah, Muhammed Yusuf; Kuang, Wenxing; DeMaleki, Zack; Tezel, F Handan

    2011-10-30

    The adsorption of cesium on cement mortar from aqueous solutions was studied in series of bench-scale tests. The effects of cesium concentration, temperature and contact time on process kinetics and equilibrium were evaluated. Experiments were carried out in a range of initial cesium concentrations from 0.0103 to 10.88 mg L(-1) and temperatures from 278 to 313 K using coupons of cement mortar immersed in the solutions. Non-radioactive cesium chloride was used as a surrogate of the radioactive (137)Cs. Solution samples were taken after set periods of time and analyzed by inductively coupled plasma mass spectroscopy. Depending on the initial cesium concentration, its equilibrium concentration in solution ranged from 0.0069 to 8.837 mg L(-1) while the respective surface concentration on coupons varied from 0.0395 to 22.34 μg cm(-2). Equilibrium test results correlated well with the Freundlich isotherm model for the entire test duration. Test results revealed that an increase in temperature resulted in an increase in adsorption rate and a decrease in equilibrium cesium surface concentration. Among several kinetic models considered, the pseudo-second order reaction model was found to be the best to describe the kinetic test results in the studied range of concentrations. The adsorption activation energy determined from Arrhenius equation was found to be approximately 55.9 kJ mol(-1) suggesting that chemisorption was the prevalent mechanism of interaction between cesium ions and cement mortar.

  2. Measurements of atmospheric methyl bromide and bromoform

    SciTech Connect

    Cicerone, R.J.; Heidt, L.E.; Pollock, W.H.

    1988-04-20

    We have measured gaseous methyl bromide (CH/sub 3/Br) and bromoform (CHBr/sub 3/) in air samples that were gathered approximately weekly from five ground-level sites: Point Barrow, Alaska; Mauna Loa Observatory and Cape Kumukahi, Hawaii; Matatula, Samoa; and Kaitorete Spit, New Zealand. Approximately 750 samples have been analyzed for CH/sub 3/Br between January 1985 and October 1987 and 990 samples have been analyzed for CHBr/sub 3/ between early 1984 and September 1987, all by gas chromatography/mass spectroscopy. Methyl bromide concentrations are typically 10--11 parts per trillion (ppt) by volume; there are no clear indications of temporal increases. Bromoform concentrations are typically 2--3 ppt, but large seasonal variations are seen at Point Barrow. copyright American Geophysical Union 1988

  3. Thallium bromide iodide crystal acoustic anisotropy examination.

    PubMed

    Mantsevich, S N

    2017-03-01

    Thallium bromide iodide crystal also known as KRS-5 is the well known material used in far infrared radiation applications for optical windows and lenses fabrication. The main advantage of this material is the transparency in wide band of wavelengths from 0.53 to 50μm. Despite such advantages as transparency and large acousto-optic figure of merit values, KRS-5 is rarely used in acousto-optics. Nevertheless this material seems to be promising for far infrared acousto-optic applications. The acoustic and acousto-optic properties of KRS-5 needed for the full use in optoelectronics are not well understood to date. In this paper the detailed examination of thallium bromide iodide crystal acoustic properties is presented.

  4. Data for methyl bromide decon testing

    EPA Pesticide Factsheets

    Spreadsheets containing data for recovery of spores from different materials. Data on the fumigation parameters are also included.This dataset is associated with the following publication:Wood , J., M. Wendling, W. Richter, A. Lastivka, and L. Mickelsen. Evaluation of the Efficacy of Methyl Bromide in the Decontamination of Building and Interior Materials Contaminated with Bacillus anthracis Spores. APPLIED AND ENVIRONMENTAL MICROBIOLOGY. American Society for Microbiology, Washington, DC, USA, 1-28, (2016).

  5. Ipratropium bromide in children with asthma.

    PubMed Central

    Mann, N P; Hiller, E J

    1982-01-01

    Eighteen children between 6 and 14 years of age with perennial asthma were studied over two four-week treatment periods. Ipratropium bromide, given in addition to their current treatment, was compared with placebo using a double-blind crossover technique. The period of treatment with ipratropium was associated with a significant reduction in symptoms during both day and night and significantly higher morning peak expiratory flow rates. PMID:6461943

  6. Methyl bromide users search for science

    SciTech Connect

    Winegar, E.D.

    1995-01-01

    Workers, neighbors and the ozone are protected by regulation from this chemical, but those needing it complain that a solid foundation is lacking for the rules. Although not yet featured on {open_quotes}60 Minutes,{close_quotes} the pesticide methyl bromide is gaining widespread attention because of its central position in debates about worker health and safety, environmental toxics exposure and global ozone depletion.

  7. Immobilization of cesium in alkaline activated fly ash matrix

    NASA Astrophysics Data System (ADS)

    Fernandez-Jimenez, A.; Macphee, D. E.; Lachowski, E. E.; Palomo, A.

    2005-11-01

    The immobilization potential of alkaline activated fly ash (AAFA) matrices for cesium has been investigated. The presence of Cs in the AAFA pastes, prepared using 8M NaOH solution as activator, showed no significant adverse effects on mechanical strength or microstructure, nor were significant quantities of Cs leached following application of the Toxic Characteristic Leaching Procedure (TCLP) and American Nuclear Society (ANS) 16.1 leaching protocols. Microstructural analysis shows Cs associated with the main reaction product in the AAFA suggesting that cesium is chemically bound rather than physically encapsulated. It is proposed that cesium is incorporated into the alkaline aluminosilicate gel, a precursor for zeolite formation.

  8. Method for removing cesium from a nuclear reactor coolant

    DOEpatents

    Colburn, Richard P.

    1986-01-01

    A method of and system for removing cesium from a liquid metal reactor coolant including a carbon packing trap in the primary coolant system for absorbing a major portion of the radioactive cesium from the coolant flowing therethrough at a reduced temperature. A regeneration subloop system having a secondary carbon packing trap is selectively connected to the primary system for isolating the main trap therefrom and connecting it to the regeneration system. Increasing the temperature of the sodium flowing through the primary trap diffuses a portion of the cesium

  9. Fundamental study of cesium decontamination from soil by superconducting magnet

    NASA Astrophysics Data System (ADS)

    Igarashi, Susumu; Mishima, Fumihito; Akiyama, Yoko; Nishijima, Shigehiro

    2013-11-01

    The radioactive substances have been spread out all over the surrounding area of Fukushima Daiichi Nuclear Power Plant caused by the accident in March 2011. Decontamination and volume reduction of radioactive substances, especially cesium ion, are desired issue. This study proposed a decontamination method of the soil by the magnetic separation using superconducting magnet. Cesium ion was adsorbed by Prussian blue in the potassium iodide solution. We succeeded in separating selectively the cesium ion-adsorbed Prussian blue out of the liquid phase by high gradient magnetic separation. High recovery ratio of the Prussian blue was achieved by this method.

  10. [Research advances in methyl bromide in the ocean].

    PubMed

    Du, Hui-na; Xie, Wen-xia; Cui, Yu-qian; Chen, Jian-lei; Ye, Si-yuan

    2014-12-01

    Methyl bromide is an important atmospheric trace gas, which plays significant roles in the global warming and atmospheric chemistry. The ocean plays important and complex roles in the global biogeochemical cycles of methyl bromide, not only the source of atmospheric methyl bromide, but also the sink. Therefore, developing the chemical research of the soluble methyl bromide in the ocean, will not only have a certain guiding significance to the atmospheric ozone layer protection, but also provide a theoretical basis for estimating methyl bromide's contribution to the global environmental change on global scale. This paper reviewed the research advances on methyl bromide in the ocean, from the aspects of the biogeochemical cycle of methyl bromide in the ocean, the analysis and determination method, the concentration distribution, the sea-to-air flux and its sources and sinks in the atmosphere. Some deficiencies in the current studies were put forward, and the directions of the future studies were prospected.

  11. Methyl bromide volatility measurements from treated fields

    SciTech Connect

    Majewski, M.S.; Woodrow, J.E.; Seiber, J.N. |

    1995-12-31

    Methyl bromide is used as an agricultural soil fumigant and concern is growing over the role it may play in the depletion of stratospheric ozone. Methyl bromide is applied using various techniques and little is known about how much of the applied fumigant volatilizes into the atmosphere after application. The post-application volatilization losses of methyl bromide from two fields using different application practices were measured using an aerodynamic-gradient technique. One field was covered with a high-barrier plastic film tarp during application and the other was left uncovered, but the furrows made by the injection shanks were bedded over. The cumulative volatilization losses from the tarped field were 22% of the nominal application within the first 5 days of the experiment and about 32% of the nominal application within 9 days including the one day after the tarp was removed on day 8. The nontarped field lost 89%of the nominal application by volatilization in 5 days. The error associated, with each flux measurement, as well as variations in daily flux losses with differing sampling period lengths show the degree of variability inherent in this type of study.

  12. Methyl bromide fate in fumigated soils

    SciTech Connect

    Anderson, T.A.; Rice, P.J.; Cink, J.H.

    1995-12-31

    Although widespread use of methyl bromide (MeBr) as a sail and structure fumigant has previously been recognized as a potential significant source of atmospheric MeBr, losses have not been well quantified. Our research indicates that, in laboratory studies, MeBr is volatilized rapidly from fumigated soils and that volatility increases with temperature (35{degrees}C > 25{degrees}C and 15{degrees}C) and moisture (0.03 bar and 0.3 bar > 1 bar > 3 bar). Degradation of MeBr in soil, as indicated by production of bromide ion, was also directly related to temperature and moisture. Most of the soil degradation of MeBr in these studies appears to be abiotic based on the observation of toxicity (reduced microbial respiration) in fumigated soils. We also determined the transformation and movement of MeBr in undisturbed soil columns. These studies also indicated that MeBT volatilizes rapidly (> 50% in 48 h) from soil. In addition, MeBr was not detected in the leachate from the soil columns, however, bromide ion was detected at levels above background 48 h after fumigation and peaked at 5 weeks.

  13. The neurological effects of methyl bromide intoxication.

    PubMed

    de Souza, Aaron; Narvencar, Kedareshwar P S; Sindhoora, K V

    2013-12-15

    Used primarily as a fumigant or as a substrate in chemical processes, methyl bromide is a highly toxic gas. The gas is usually absorbed by inhalation and effects on the lungs, gastrointestinal tract, skin, and brain are seen. Numerous instances of acute and chronic neurologic injury have been reported: acute poisoning results in seizures, myoclonus, ataxia or cerebral oedema beginning as early as 30 min after exposure while subacute or chronic intoxication presents with diverse slowly progressive neurological and neurobehavioral symptoms. Serum bromide levels may be elevated, but often return rapidly to normal. Electroencephalography may show frontally-predominant slow waves or polyspikes with following slow wave, and MRI reveals characteristic involvement in the dentate nucleus of the cerebellum, the brainstem, and the splenium of the corpus callosum. Symmetric and selective lesions in characteristic sites are observed on imaging and on histopathological examination. These are likely produced by methylation of intracellular lipids, protein and glutathione; production of toxic metabolites; defective neurotransmitter function; and abnormal oxidative phosphorylation. This article reviews the toxic effects of this gas, the pathophysiology and symptoms of its effects on the nervous system, and characteristic findings on MRI; and presents an illustrative case of methyl bromide intoxication due to exposure at a factory producing the compound commercially.

  14. Structural Studies of Cesium, Lithium/Cesium, and Sodium/Cesium Bis(trimethylsilyl)amide (HMDS) Complexes.

    PubMed

    Ojeda-Amador, Ana I; Martínez-Martínez, Antonio J; Kennedy, Alan R; O'Hara, Charles T

    2016-06-06

    Reacting cesium fluoride with an equimolar n-hexane solution of lithium bis(trimethylsilyl)amide (LiHMDS) allows the isolation of CsHMDS (1) in 80% yield (after sublimation). This preparative route to 1 negates the need for pyrophoric Cs metal or organocesium reagents in its synthesis. If a 2:1 LiHMDS:CsF ratio is employed, the heterobimetallic polymer [LiCs(HMDS)2]∞ 2 was isolated (57% yield). By combining equimolar quantities of NaHMDS and CsHMDS in hexane/toluene [toluene·NaCs(HMDS)]∞ 3 was isolated (62% yield). Attempts to prepare the corresponding potassium-cesium amide failed and instead yielded the known monometallic polymer [toluene·Cs(HMDS)]∞ 4. With the aim of expanding the structural diversity of Cs(HMDS) species, 1 was reacted with several different Lewis basic donor molecules of varying denticity, namely, (R,R)-N,N,N',N'-tetramethylcyclohexane-1,2-diamine [(R,R)-TMCDA] and N,N,N',N'-tetramethylethylenediamine (TMEDA), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDETA), tris[2-(dimethylamino)ethyl]amine (Me6-TREN) and tris[2-(2-methoxyethoxy)ethyl]amine (TMEEA). These reactions yielded dimeric [donor·NaCs(HMDS)2]2 5-7 [where donor is (R,R)-TMCDA, TMEDA and PMDETA respectively], the tetranuclear "open"-dimer [{Me6-TREN·Cs(HMDS)}2{Cs(HMDS)}2] 8 and the monomeric [TMEEA·Cs(HMDS)] 9. Complexes 2, 3, and 5-9 were characterized by X-ray crystallography and in solution by multinuclear NMR spectroscopy.

  15. Biokinetics of cesium in Perna viridis

    SciTech Connect

    Yu, P.K.N.; Lam, P.K.S.; Ng, B.K.P.; Li, A.M.Y.

    2000-02-01

    The biokinetics of Cs in four compartments in the green-lipped mussel Perna viridis, namely, gill, viscera, adductor muscle, and foot, were studied. First-order linear differential equations were set up for these four compartments, and their solutions were used to fit the experimental data. The parameters governing the biokinetics, which depend on the elimination rate from each compartment and the transfer coefficient between compartments, were found. These are useful in understanding the physiology of Perna viridis, in predicting the activity of cesium in each compartment of Perna viridis from a contamination history, or in using Perna viridis as a sentinel organism for surveying and monitoring radioactive contamination. The results showed that the viscera should be represented by more than one compartment. Concentration factors for the four compartments and for Perna viridis were also determined, and these agreed well with reported values in the literature.

  16. [Reduction of radioactive cesium content in pond smelt by cooking].

    PubMed

    Nabeshi, Hiromi; Tsutsumi, Tomoaki; Hachisuka, Akiko; Matsuda, Rieko

    2013-01-01

    In Japan, seafood may be eaten raw or after having been cooked in diverse ways. Therefore, it is important to understand the effect of cooking on the extent of contamination with radioactive materials in order to avoid internal exposure to radioactive materials via seafood. In this study, we investigated the changes in radioactive cesium content in pond smelt cooked in four different ways: grilled, stewed (kanroni), fried and soaked (nanbanzuke). The radioactive cesium content in grilled, kanroni and fried pond smelt was almost unchanged compared with the uncooked state. In contrast, radioactive cesium content in nanbanzuke pond smelt was decreased by about 30%. Our result suggests that soaking cooked pond smelt in seasoning is an effective method of reducing the burden radioactive cesium.

  17. Low-energy vibrational dynamics of cesium borate glasses.

    PubMed

    Crupi, C; D'Angelo, G; Vasi, C

    2012-06-07

    Low-temperature specific heat and inelastic light scattering experiments have been performed on a series of cesium borate glasses and on a cesium borate crystal. Raman measurements on the crystalline sample have revealed the existence of cesium rattling modes in the same frequency region where glasses exhibit the boson peak (BP). These localized modes are supposed to overlap with the BP in cesium borate glasses affecting its magnitude. Their influence on the low frequency vibrational dynamics in glassy samples has been considered, and their contribution to the specific heat has been estimated. Evidence for a relation between the changes of the BP induced by the increased amount of metallic oxide and the variations of the elastic medium has been provided.

  18. Low-work-function surfaces produced by cesium carbonate decomposition

    NASA Technical Reports Server (NTRS)

    Briere, T. R.; Sommer, A. H.

    1977-01-01

    Cesium carbonate (Cs2CO3) was heated to the decomposition temperature of approximately 600 C. The nonvolatile decomposition products were condensed on a nickel substrate while the carbon dioxide was removed by pumping. The deposited material is characterized by an effective work function of between 1.05 and 1.15 eV at 450 K and by photoemission in the visible and near-infrared region of the spectrum. It is suggested that the deposited material consists of Cs2O, possibly Cs2O2, and adsorbed cesium. Silver, evaporated from a heated silver bead, produced the typical photoemissive and thermionic properties of a silver-oxygen-cesium (S-1) photocathode. The material may be of interest for thermionic energy converters and for the formation of silver-oxygen-cesium photocathodes.

  19. Nanocube Superlattices of Cesium Lead Bromide Perovskites and Pressure-Induced Phase Transformations at Atomic and Mesoscale Levels.

    PubMed

    Nagaoka, Yasutaka; Hills-Kimball, Katie; Tan, Rui; Li, Ruipeng; Wang, Zhongwu; Chen, Ou

    2017-03-10

    Lead halide perovskites are promising materials for a range of applications owing to their unique crystal structure and optoelectronic properties. Understanding the relationship between the atomic/mesostructures and the associated properties of perovskite materials is crucial to their application performances. Herein, the detailed pressure processing of CsPbBr3 perovskite nanocube superlattices (NC-SLs) is reported for the first time. By using in situ synchrotron-based small/wide angle X-ray scattering and photoluminescence (PL) probes, the NC-SL structural transformations are correlated at both atomic and mesoscale levels with the band-gap evolution through a pressure cycle of 0 ↔ 17.5 GPa. After the pressurization, the individual CsPbBr3 NCs fuse into 2D nanoplatelets (NPLs) with a uniform thickness. The pressure-synthesized perovskite NPLs exhibit a single cubic crystal structure, a 1.6-fold enhanced photoluminescence quantum yield, and a longer emission lifetime than the starting NCs. This study demonstrates that pressure processing can serve as a novel approach for the rapid conversion of lead halide perovskites into structures with enhanced properties.

  20. Cesium dynamics in long pulse operation of negative hydrogen ion sources for fusion.

    PubMed

    Fantz, U; Wimmer, C

    2012-02-01

    Large scale negative hydrogen ion sources operating stable for 1 h (cw mode) are required for the neutral beam heating system of the fusion experiment ITER. The formation of negative hydrogen ions relies on the surface effect for which cesium is evaporated into the source. In order to monitor the cesium dynamics the laser absorption spectroscopy technique is applied to the long pulse test facility MANITU. In the vacuum phase, without plasma operation the evaporation of cesium and the built-up of the cesium in the source are measured. Typical neutral cesium densities are 10(15) m(-3). During plasma operation and after the plasma phase a high cesium dynamics is observed, showing also depletion of cesium during long pulses with low cesium amount. The co-extracted electron current decreases with the cesium amount to a certain level whereas the ion current indicates an optimum density range.

  1. Cesium dynamics in long pulse operation of negative hydrogen ion sources for fusion

    SciTech Connect

    Fantz, U.; Wimmer, C.

    2012-02-15

    Large scale negative hydrogen ion sources operating stable for 1 h (cw mode) are required for the neutral beam heating system of the fusion experiment ITER. The formation of negative hydrogen ions relies on the surface effect for which cesium is evaporated into the source. In order to monitor the cesium dynamics the laser absorption spectroscopy technique is applied to the long pulse test facility MANITU. In the vacuum phase, without plasma operation the evaporation of cesium and the built-up of the cesium in the source are measured. Typical neutral cesium densities are 10{sup 15} m{sup -3}. During plasma operation and after the plasma phase a high cesium dynamics is observed, showing also depletion of cesium during long pulses with low cesium amount. The co-extracted electron current decreases with the cesium amount to a certain level whereas the ion current indicates an optimum density range.

  2. Cesium powder and pellets inner container decontamination method determination

    SciTech Connect

    Ferrell, P.C.

    1998-07-09

    The cesium powder and pellets inner container is to be performance tested per the criteria specified in Section 4.0 of HNF-2399, ``Design, Fabrication, and Assembly Criteria for Cesium Powder and Pellet Inner Container.`` The test criteria specifies that the inner container be water tight during decontamination of the exterior surface. Three prototypes will be immersed into a pool of water to simulate a water decontamination process.

  3. Timescale algorithms combining cesium clocks and hydrogen masers

    NASA Technical Reports Server (NTRS)

    Breakiron, Lee A.

    1992-01-01

    The United States Naval Observatory (USNO) atomic timescale, formerly based on an ensemble of cesium clocks, is now produced by an ensemble of cesium clocks and hydrogen masers. In order to optimize stability and reliability, equal clock weighting has been replaced by a procedure reflecting the relative, time-varying noise characteristics of the two different types of clocks. Correlation of frequency drift is required, and residual drift is avoided by the eventual complete deweighting of the masers.

  4. Engineering considerations for the recovery of cesium from geologic materials

    SciTech Connect

    Whalen, C.

    1993-05-18

    Sorption coefficients for cesium in a variety of media have been compiled from a search of the open literature. The sorption coefficient, or K{sub d}, is a description of a dissolved substance`s tendency to attach to a solid substrate. The compilation of K{sub d}S reported here for cesium demonstrate that this element readily sorbs onto-geological material. As a result of this sorption, the mass transport of cesium in the environment will be retarded. This retarded mass transport, characterized by the retardation factor, can be expected to be significant when compared to water velocities through porous-sorbing medium, such as geologic materials. K{sub d}S for cesium are in the range of 100 m{ell}/g up to 10,000 m{ell}/g. K{sub d}S are also an important parameter in the design of engineered systems for the purpose of recovering cesium from soils. The engineering design is based on a material-balance description of the extraction process. The information presented in this report provides a basis to predict the movement of cesium through geologic materials and also to design and predict the performance of extraction processes such as soil washing.

  5. Engineering considerations for the recovery of cesium from geologic materials

    SciTech Connect

    Whalen, C.

    1993-05-18

    Sorption coefficients for cesium in a variety of media have been compiled from a search of the open literature. The sorption coefficient, or K[sub d], is a description of a dissolved substance's tendency to attach to a solid substrate. The compilation of K[sub d]S reported here for cesium demonstrate that this element readily sorbs onto-geological material. As a result of this sorption, the mass transport of cesium in the environment will be retarded. This retarded mass transport, characterized by the retardation factor, can be expected to be significant when compared to water velocities through porous-sorbing medium, such as geologic materials. K[sub d]S for cesium are in the range of 100 m[ell]/g up to 10,000 m[ell]/g. K[sub d]S are also an important parameter in the design of engineered systems for the purpose of recovering cesium from soils. The engineering design is based on a material-balance description of the extraction process. The information presented in this report provides a basis to predict the movement of cesium through geologic materials and also to design and predict the performance of extraction processes such as soil washing.

  6. Effects of cesium ions and cesium vapor on selected ATS-F samples. [thermal control coating degradation

    NASA Technical Reports Server (NTRS)

    Kemp, R. F.; Beynon, J. C.; Hall, D. F.; Luedke, E. E.

    1973-01-01

    Thermal control coating samples were subjected to cesium ion beam and vapor exposures. Degradation of solar absorptance and infrared emittance were measured. Solar cells and samples selected from surfaces on the ATS-F spacecraft likely to experience ion or vapor impingement were bombarded by 10-volt cesium ions. Other samples were subjected to high levels of cesium vapor. Aluminum and white paint were backsputtered by 550-volt cesium ions onto selected samples. For direct bombardment, the threshold for ion-induced property changes was above five-thousand trillion ions/sq cm. With material sputtered from a 450-sq cm target onto samples 36 cm distant, the threshold for noticeable effects was above 5 times 10 to the 17-th power ions/sq cm.

  7. Micro-PIXE evaluation of radioactive cesium transfer in contaminated soil samples

    NASA Astrophysics Data System (ADS)

    Fujishiro, F.; Ishii, K.; Matsuyama, S.; Arai, H.; Ishizaki, A.; Osada, N.; Sugai, H.; Kusano, K.; Nozawa, Y.; Yamauchi, S.; Karahashi, M.; Oshikawa, S.; Kikuchi, K.; Koshio, S.; Watanabe, K.; Suzuki, Y.

    2014-01-01

    Micro-PIXE analysis has been performed on two soil samples with high cesium activity concentrations. These soil samples were contaminated by fallout from the accident at Fukushima Daiichi Nuclear Power Plant. One exhibits a radioactive cesium transfer of ˜0.01, and the other shows a radioactive cesium transfer of less than 0.001, even though both samples have high cesium activity concentrations exceeding 10,000 Bq/kg. X-ray spectra and elemental images of the soil samples revealed the presence of chlorine, which can react with cesium to produce an inorganic soluble compound, and phosphorus-containing cesium-capturable organic compounds.

  8. Europium-doped barium bromide iodide

    SciTech Connect

    Gundiah, Gautam; Hanrahan, Stephen M.; Hollander, Fredrick J.; Bourret-Courchesne, Edith D.

    2009-10-21

    Single crystals of Ba0.96Eu0.04BrI (barium europium bromide iodide) were grown by the Bridgman technique. The title compound adopts the ordered PbCl2 structure [Braekken (1932). Z. Kristallogr. 83, 222-282]. All atoms occupy the fourfold special positions (4c, site symmetry m) of the space group Pnma with a statistical distribution of Ba and Eu. They lie on the mirror planes, perpendicular to the b axis at y = +-0.25. Each cation is coordinated by nine anions in a tricapped trigonal prismatic arrangement.

  9. Advanced hydrogen electrode for hydrogen-bromide battery

    NASA Technical Reports Server (NTRS)

    Kosek, Jack A.; Laconti, Anthony B.

    1987-01-01

    Binary platinum alloys are being developed as hydrogen electrocatalysts for use in a hydrogen bromide battery system. These alloys were varied in terms of alloy component mole ratio and heat treatment temperature. Electrocatalyst evaluation, performed in the absence and presence of bromide ion, includes floating half cell polarization studies, electrochemical surface area measurements, X ray diffraction analysis, scanning electron microscopy analysis and corrosion measurements. Results obtained to date indicate a platinum rich alloy has the best tolerance to bromide ion poisoning.

  10. [Spectrophotometer detection of benzalkonium bromide concentration in seawater].

    PubMed

    Pan, Jianyu; Yin, Pinghe; Zhao, Ling; Qi, Yuzao; Xie, Longchu

    2003-07-01

    Benzalkonium bromide is a high-efficiency algaecide. Its concentration in seawater was measured by the method of spectrophotometer. The results indicated that the deposition appeared if the concentration of benzalkonium bromide in seawater was more than 50 mg.L-1, and affected the detection of benzalkonium bromide. But, there was a good linear relationship between concentration and absorbance when the concentration was lower than 50 mg.L-1 (R2 = 0.9996). Therefore, spectrophotometer could be used to detect benzalkonium bromide in seawater.

  11. Cesium toxicity: a case of self-treatment by alternate therapy gone awry.

    PubMed

    Lyon, Andrew W; Mayhew, William J

    2003-02-01

    Cesium salts have been used in animal models to induce cardiac arrhythmias for several decades, but the sequelae of human cesium toxicity have seldom been described. The authors describe a case of cesium toxicity manifested by syncope, polymorphic ventricular tachycardia, hypokalemia, and a QT interval prolonged to 650 milliseconds that resolved over 4 days following withdrawal of cesium. The patient had a 2-year history of colon cancer and had self-treated with cesium chloride, 3 g/d, for several weeks, using cesium as a form of alternate therapy for cancer. The authors describe the pathophysiologic correlates and risks of cesium consumption and conclude that cesium toxicity should be considered among the differential diagnoses of prolonged QT interval.

  12. A novel role for methyl cysteinate, a cysteine derivative, in cesium accumulation in Arabidopsis thaliana

    NASA Astrophysics Data System (ADS)

    Adams, Eri; Miyazaki, Takae; Hayaishi-Satoh, Aya; Han, Minwoo; Kusano, Miyako; Khandelia, Himanshu; Saito, Kazuki; Shin, Ryoung

    2017-02-01

    Phytoaccumulation is a technique to extract metals from soil utilising ability of plants. Cesium is a valuable metal while radioactive isotopes of cesium can be hazardous. In order to establish a more efficient phytoaccumulation system, small molecules which promote plants to accumulate cesium were investigated. Through chemical library screening, 14 chemicals were isolated as ‘cesium accumulators’ in Arabidopsis thaliana. Of those, methyl cysteinate, a derivative of cysteine, was found to function within the plant to accumulate externally supplemented cesium. Moreover, metabolite profiling demonstrated that cesium treatment increased cysteine levels in Arabidopsis. The cesium accumulation effect was not observed for other cysteine derivatives or amino acids on the cysteine metabolic pathway tested. Our results suggest that methyl cysteinate, potentially metabolised from cysteine, binds with cesium on the surface of the roots or inside plant cells and improve phytoaccumulation.

  13. Cesium Accumulation and Growth Characteristics of Rhodococcus erythropolis CS98 and Rhodococcus sp. Strain CS402

    PubMed Central

    Tomioka, Noriko; Uchiyama, Hiroo; Yagi, Osami

    1994-01-01

    Growth and cesium accumulation characteristics of two cesium-accumulating bacteria isolated from soils were investigated. Rhodococcus erythropolis CS98 and Rhodococcus sp. strain CS402 accumulated high levels of cesium (approximately 690 and 380 μmol/g [dry weight] of cells or 92 and 52 mg/g [dry weight] of cells, respectively) after 24 h of incubation in the presence of 0.5 mM cesium. The optimum pH for cesium uptake by both Rhodococcus strains was 8.5. Rubidium and cesium assumed part of the role of potassium in the growth of both Rhodococcus strains. Potassium and rubidium inhibited cesium accumulation by these Rhodococcus strains. It is likely that both Rhodococcus strains accumulated cesium through a potassium transport system. PMID:16349312

  14. A novel role for methyl cysteinate, a cysteine derivative, in cesium accumulation in Arabidopsis thaliana

    PubMed Central

    Adams, Eri; Miyazaki, Takae; Hayaishi-Satoh, Aya; Han, Minwoo; Kusano, Miyako; Khandelia, Himanshu; Saito, Kazuki; Shin, Ryoung

    2017-01-01

    Phytoaccumulation is a technique to extract metals from soil utilising ability of plants. Cesium is a valuable metal while radioactive isotopes of cesium can be hazardous. In order to establish a more efficient phytoaccumulation system, small molecules which promote plants to accumulate cesium were investigated. Through chemical library screening, 14 chemicals were isolated as ‘cesium accumulators’ in Arabidopsis thaliana. Of those, methyl cysteinate, a derivative of cysteine, was found to function within the plant to accumulate externally supplemented cesium. Moreover, metabolite profiling demonstrated that cesium treatment increased cysteine levels in Arabidopsis. The cesium accumulation effect was not observed for other cysteine derivatives or amino acids on the cysteine metabolic pathway tested. Our results suggest that methyl cysteinate, potentially metabolised from cysteine, binds with cesium on the surface of the roots or inside plant cells and improve phytoaccumulation. PMID:28230101

  15. Cesium-137 levels detected in Georgia otters

    SciTech Connect

    Halbrook, R.S.; Jenkins, J.H.

    1988-11-01

    Beginning in the 1940's and continuing through the 50's and early 60's, nuclear devices were tested by aerial detonation in the United States and other countries around the world. Cesium-137 (/sup 137/Cs) is one of the most important radionuclide by-products due to its abundance and slow decay (30-year half-life). The uptake of /sup 137/Cs in animal tissue is the result of its similarity to potassium. The somatic and genetic effects of /sup 137/Cs, along with its effect on reproductive cells, can pose great hazards to wildlife species. A reported buildup of /sup 137/Cs in white-tailed deer in the lower coastal plain of Georgia during the 1960's was followed by a gradual decline during the 1970's. Although numerous studies have involved terrestrial mammals of Georgia, few have involved aquatic mammals such as the river otter. With continued atmospheric testing by some foreign countries and the increased use of nuclear power as an energy source, there is a need for continued monitoring of radionuclides in wildlife to ascertain the quality of the environment. This study was initiated as part of an overall study of environmental pollutants in the river otter of Georgia and deals with analysis of the /sup 137/Cs accumulations in this species.

  16. Exotic stable cesium polynitrides at high pressure

    PubMed Central

    Peng, Feng; Han, Yunxia; Liu, Hanyu; Yao, Yansun

    2015-01-01

    New polynitrides containing metastable forms of nitrogen are actively investigated as potential high-energy-density materials. Using a structure search method based on the CALYPSO methodology, we investigated the stable stoichiometries and structures of cesium polynitrides at high pressures. Along with the CsN3, we identified five new stoichiometric compounds (Cs3N, Cs2N, CsN, CsN2, and CsN5) with interesting structures that may be experimentally synthesizable at modest pressures (i.e., less than 50 GPa). Nitrogen species in the predicted structures have various structural forms ranging from single atom (N) to highly endothermic molecules (N2, N3, N4, N5, N6) and chains (N∞). Polymeric chains of nitrogen were found in the high-pressure C2/c phase of CsN2. This structure contains a substantially high content of single N-N bonds that exceeds the previously known nitrogen chains in pure forms, and also exhibit metastability at ambient conditions. We also identified a very interesting CsN crystal that contains novel N44− anion. To our best knowledge, this is the first time a charged N4 species being reported. Results of the present study suggest that it is possible to obtain energetic polynitrogens in main-group nitrides under high pressure. PMID:26581175

  17. Exotic stable cesium polynitrides at high pressure

    DOE PAGES

    Peng, Feng; Han, Yunxia; Liu, Hanyu; ...

    2015-11-19

    New polynitrides containing metastable forms of nitrogen are actively investigated as potential high energy-density materials. Using a structure search method based on the CALYPSO methodology, we investigated the stable stoichiometries and structures of cesium polynitrides at high pressures. Along with the CsN3, we identified five new stoichiometric compounds (Cs3N, Cs2N, CsN, CsN2, and CsN5) with interesting structures that may be experimentally synthesizable at modest pressures (i.e., less than 50 GPa). Nitrogen species in the predicted structures have various structural forms ranging from single atom (N) to highly endothermic molecules (N2, N3 , N4, N5, N6) and chains (N∞). Polymeric chainsmore » of nitrogen were found in the high-pressure C2/c phase of CsN2. This structure contains a substantially high content of single N-N bonds that exceeds the previously known nitrogen chains in pure forms, and also exhibit metastability at ambient conditions. We also identified a very interesting CsN crystal that contains novel N44- anion. In conclusion, to our best knowledge, this is the first time a charged N4 species being reported. Results of the present study suggest that it is possible to obtain energetic polynitrogens in main-group nitrides under high pressure.« less

  18. Time-resolved polaron dynamics in molten solutions of cesium-doped cesium iodide.

    PubMed

    Chandrasekhar, N; Unterreiner, A-N

    2007-11-14

    Temperature-dependent investigations of excess electrons in molten solutions of cesium-doped cesium iodide (Cs-CsI) (mole fraction of Cs approximately 0.003) were performed applying femtosecond pump-probe absorption spectroscopy. The pulse-limited induced bleach observed at probe wavelengths from 600 to 1240 nm was attributed to the excitation of equilibrated excess electrons which were initially formed by melting a Cs-CsI mixture. The interpretation of the relaxation process is based on strongly localized polarons that constitute the majority of defect states in this melt. As expected, the bipolaron contribution was insignificant. The time constants (tau1) were found to be temperature dependent confirming our earlier findings in Na-NaI melts that ionic diffusion almost exclusively controls the dynamics of excess electrons in high temperature ionic liquids. Apart from this temperature dependence, the relaxation dynamics of excess electrons do not differ irrespective of the excitation regime (blue or red part of the respective stationary spectra).

  19. The diffusion of cesium, strontium, and europium in silicon carbide

    NASA Astrophysics Data System (ADS)

    Dwaraknath, S. S.; Was, G. S.

    2016-08-01

    A novel multi-layer diffusion couple was used to isolate the diffusion of strontium, europium and cesium in SiC without introducing radiation damage to SiC and at concentrations below the solubility limit for the fission products in SiC. Diffusion occurred by both bulk and grain boundary pathways for all three fission products between 900∘ C and 1 ,300∘ C. Cesium was the fastest diffuser below 1 ,100∘ C and the slowest above this temperature. Strontium and europium diffusion tracked very closely as a function of temperature for both bulk and grain boundary diffusion. Migration energies ranged from 1.0 eV to 5.7 eV for bulk diffusion and between 2.2 eV and 4.7 eV for grain boundary diffusion. These constitute the first measurements of diffusion of cesium, europium, and strontium in silicon carbide, and the magnitude of the cesium diffusion coefficient supports the premise that high quality TRISO fuel should have minimal cesium release.

  20. Isolation and characterization of cesium-accumulating bacteria.

    PubMed Central

    Tomioka, N; Uchiyama, H; Yagi, O

    1992-01-01

    Cesium-accumulating bacteria, strains CS98 and CS402, were isolated from soil by a radioactive autoradiographic method using 137Cs. These strains displayed the rod-coccus growth cycle and contained mesodiaminopimelic acid, mycolic acids, and tuberculostearic acids. The major menaquinone of CS98 was MK-8(H2). On the basis of these characteristics, strain CS98 was identified as Rhodococcus erythropolis and strain CS402 was classified in the genus Rhodococcus. The maximum values of cesium removal efficiencies in the liquid culture containing 10 mumol of cesium per liter for strains CS98 and CS402 were 90 and 47%, respectively. The maximum cesium contents in strains CS98 and CS402 were 52.0 and 18.8 mumol/g (dry weight) of cells, respectively. Maximum values of cesium concentration factors for strains CS98 and CS402 were 3.5 x 10(4) and 3.6 x 10(3), respectively. Images PMID:1575473

  1. Evaluation of Elution Parameters for Cesium Ion Exchange Resins

    SciTech Connect

    Burgeson, Ingrid E.; Deschane, Jaquetta R.; Cook, Bryan J.; Blanchard, David L.; Weier, Dennis R.

    2006-08-28

    Cesium ion exchange is one of the planned processes for treating and disposing of waste at the U.S. Department of Energy Hanford Site. Radioactive supernatant liquids from the waste tanks will undergo ultrafiltration, followed by cesium ion exchange using a regenerable organic ion exchange resin. Two resins, SuperLig?644 and a Resorcinol-formaldehyde resin are being evaluated for cesium removal and cesium elution characteristics. The main purpose of this study is to optimize the cesium elution to provide a resin which after undergoing elution would meet the U.S. Department of Energy/Office of River Protection Project-Waste Treatment Plant processing and resin disposal criteria. Columns of each resin type were loaded to greater or equal to 90% breakthrough with a Hanford waste stimulant and eluted with nitric acid. The temperature, flow rate and nitric acid concentration were varied to determine the optimal elution conditions. Temperature and eluant flow rate were the most important elution parameters. As would be predicted based upon kinetic consideration alone, decreasing the eluant flow rate and increasing the temperature provided the optimal elution conditions. Varying the nitric acid concentration did not have a significant effect on the elution; however, elutions performed using both high acid concentration (1M) and elevated temperature (45 C) resulted in resin degradation, causing gas generation and resin bed disruption.

  2. Compact optical system for cesium atomic fountain clock

    NASA Astrophysics Data System (ADS)

    Chen, Jiang; Ruan, Jun; Shi, Junru; Yu, Fengxiang; Zhang, Hui; Wang, Xinliang; Zhang, Shougang

    2016-09-01

    The optical system plays a significant role to cesium atomic fountain clocks, which manipulates and detects population of cesium atoms. This paper presents a compact optical system for cesium atomic fountain clocks. The optical system provides two beams with 32mW separately for cooling atoms and six beams of 12mW respectively for trapping atoms with the frequency tuning from 80MHz to 220MHz. The relative intensity noise of the detect laser beam reduces from 1.33×10-6 Hz to 1.52×10-10 Hz at 1Hz by the laser power stabilization system. The optical system operates continuously for 30 days with the fluctuation of optical power less than 3% approximately. And the frequency stability is 3×10-15 at 1000s. The results show the optical system satisfies with the needs of our cesium atomic fountain clock developed and establishes the foundation for cesium atomic fountain continuous operation.

  3. Radial Distribution of Absorption in a Cesium Heat Pipe with Axial Laser Heating

    DTIC Science & Technology

    2011-03-01

    medium is cesium while the laser is tuned to the D1 line for cesium mentioned later. Pulsed and CW DPALs have been compared in recent demonstrations by...RADIAL DISTRIBUTION OF ABSORPTION IN A CESIUM HEAT PIPE WITH AXIAL LASER HEATING THESIS...ABSORPTION IN A CESIUM HEAT PIPE WITH AXIAL LASER HEATING THESIS Presented to the Faculty Department of Aeronautics and Astronautics Graduate School

  4. Cesium Sorption/Desorption Experiments with IONSIV(R) IE-911 in Radioactive Waste

    SciTech Connect

    Walker, D.D.

    2001-02-13

    This report describes cesium desorption from IONSIV IE-911 during ambient temperature storage and following temperature increases to 35 and 55 degrees C. This report also describes cesium sorption following return to ambient temperature. The IONSIV IE-911 used in these tests was loaded with cesium from Tank 44F radioactive waste in an ion exchange column test in 1999. Cesium desorbed and resorbed in the presence of Tank 44F waste and simulated waste solutions.

  5. An Ill Wind: Methyl Bromide Use Near California Schools, 1998.

    ERIC Educational Resources Information Center

    Ross, Zev; Walker, Bill

    A California study investigates the use of the toxic pesticide methyl bromide near the state's public schools, explains why proposed safety rules have failed to protect children and others from exposure, and examines regions at particular exposure risk. Study results show an increasing exposure to methyl bromide near schools already at risk while…

  6. 40 CFR 721.10393 - Sodium bromide MDA complex (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Sodium bromide MDA complex (generic... Specific Chemical Substances § 721.10393 Sodium bromide MDA complex (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as sodium...

  7. Sir Charles Locock and potassium bromide.

    PubMed

    Eadie, M J

    2012-01-01

    On 12 May 1857, Edward Sieveking read a paper on epilepsy to the Royal Medical and Chirurgical Society in London. During the discussion that followed Sir Charles Locock, obstetrician to Queen Victoria, was reported to have commented that during the past 14 months he had used potassium bromide to successfully stop epileptic seizures in all but one of 14 or 15 women with 'hysterical' or catamenial epilepsy. This report of Locock's comment has generally given him credit for introducing the first reasonably effective antiepileptic drug into medical practice. However examination of the original reports raises questions as to how soundly based the accounts of Locock's comments were. Subsequently, others using the drug to treat epilepsy failed to obtain the degree of benefit that the reports of Locock's comments would have led them to expect. The drug might not have come into more widespread use as a result, had not Samuel Wilks provided good, independent evidence for the drug's antiepileptic efficacy in 1861.

  8. Single ion dynamics in molten sodium bromide

    SciTech Connect

    Alcaraz, O.; Trullas, J.; Demmel, F.

    2014-12-28

    We present a study on the single ion dynamics in the molten alkali halide NaBr. Quasielastic neutron scattering was employed to extract the self-diffusion coefficient of the sodium ions at three temperatures. Molecular dynamics simulations using rigid and polarizable ion models have been performed in parallel to extract the sodium and bromide single dynamics and ionic conductivities. Two methods have been employed to derive the ion diffusion, calculating the mean squared displacements and the velocity autocorrelation functions, as well as analysing the increase of the line widths of the self-dynamic structure factors. The sodium diffusion coefficients show a remarkable good agreement between experiment and simulation utilising the polarisable potential.

  9. Degradation of methyl bromide in anaerobic sediments

    USGS Publications Warehouse

    Oremland, R.S.; Miller, L.G.; Strohmaler, F.E.

    1994-01-01

    Methyl bromide (MeBr) was anaerobically degraded in saltmarsh sediments after reaction with sulfide. The product of this nucleophilic substitution reaction was methanethiol, which underwent further chemical and bacterial reactions to form dimethyl sulfide. These two gases appeared transiently during sediment incubations because they were metabolized by methanogenic and sulfate-reducing bacteria. A second, less significant reaction of MeBr was the exchange with chloride, forming methyl chloride, which was also susceptible to attack by sulfide. Incubation of 14C-labeled methyl iodide as an analogue of MeBr resulted in the formation of 14CH4 and 14CO2 and also indicated that sulfate-reducing bacteria as well as methanogens metabolized the methylated sulfur intermediates. These results suggest that exposed sediments with abundant free sulfide, such as coastal salt-marshes, may constitute a sink for atmospheric MeBr.

  10. Wide Area Recovery and Resiliency Program (WARRP) Interim Clearance Strategy for Environments Contaminated with Cesium-137

    DTIC Science & Technology

    2012-07-01

    Wide Area Recovery & Resiliency Program (WARRP) Interim Clearance Strategy for Environments Contaminated with Cesium -137 July...and Resiliency Program (WARRP) Interim Clearance Strategy for Environments Contaminated with Cesium -137 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...speedy recovery. 15. SUBJECT TERMS WARRP, Cesium -137, Clearance Strategy, Remediation 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT

  11. 40 CFR 721.10292 - Silicate (2-), hexafluoro-, cesium (1:2).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Silicate (2-), hexafluoro-, cesium (1... Specific Chemical Substances § 721.10292 Silicate (2-), hexafluoro-, cesium (1:2). (a) Chemical substance...-) hexafluoro-cesium (1:2) (PMN P-11-546; CAS No. 16923-87-8) is subject to reporting under this section for...

  12. 40 CFR 721.10292 - Silicate (2-), hexafluoro-, cesium (1:2).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Silicate (2-), hexafluoro-, cesium (1... Specific Chemical Substances § 721.10292 Silicate (2-), hexafluoro-, cesium (1:2). (a) Chemical substance...-) hexafluoro-cesium (1:2) (PMN P-11-546; CAS No. 16923-87-8) is subject to reporting under this section for...

  13. 40 CFR 721.10292 - Silicate (2-), hexafluoro-, cesium (1:2).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Silicate (2-), hexafluoro-, cesium (1... Specific Chemical Substances § 721.10292 Silicate (2-), hexafluoro-, cesium (1:2). (a) Chemical substance...-) hexafluoro-cesium (1:2) (PMN P-11-546; CAS No. 16923-87-8) is subject to reporting under this section for...

  14. Indirect spectrophotometric determination of traces of bromide in water

    USGS Publications Warehouse

    Fishman, M. J.; Skougstad, M.W.

    1963-01-01

    A rapid, accurate, and sensitive indirect spectrophotometric method for the determination of bromide in natural waters is based on the catalytic effect of bromide on the oxidation of iodine to iodate by potassium permanganate in sulfuric acid solution. The method is applicable to concentrations ranging from 1 to 100 ??g. of bromide per liter, but may be modified to extend the concentration range. Most ions commonly occurring in water do not interfere. The standard deviation is 2.9 at bromide concentrations of 100 ??g. per liter and less at lower concentrations. The determination of bromide in samples containing known added amounts gave values ranging from 99 to 105% of the concentration calculated to be present.

  15. Environmental application of cesium-137 irradiation technology: Sludges and foods

    NASA Astrophysics Data System (ADS)

    Sivinski, Jacek S.

    Several activities have been undertaken to investigate and implement the use of the military byproduct cesium-137 in ways which benefit mankind. Gamma radiation from cesium-137 has been shown to be effective in reducing pathogens in sewage sludge to levels where reuse of the material in public areas meets current regulatory criteria for protection of public health. Food irradiation at doses of 10 kGy or less have been found by international expert committees to be wholesome and safe for human consumption. Cesium-137 can be used as a means of enhancing particular properties of various food commodities by means of sterilization, insect disinfestation, delayed senescence and ripening, and sprout inhibition. This paper discusses the U.S. Department of Energy Beneficial Uses Program research and engineering history, as well as current activities and future plans, relating to both sewage sludge and food irradiation.

  16. The BaBar cesium iodide electromagnetic calorimeter

    SciTech Connect

    Wuest, C.R.

    1994-12-01

    The BABAR Cesium Iodide Electromagnetic Calorimeter is currently in the technical design stage. The calorimeter consists of approximately 10,000 individual thallium-doped cesium iodide crystals arranged in a near-hermetic barrel and endcap structure. Taking previous cesium iodide calorimeters as a benchmark, we hope to build a system with roughly two times better energy resolution. This will be achieved by a combination of high quality crystal growing, precision mechanical processing of crystals and support structure, highly efficient light collection and low noise readout electronics. The calorimeter described here represents the current state of the design and we are undertaking an active period of optimization before this design is finalized. We discuss here the physics motivation, the current design and options for optimization.

  17. Controllable evaporation of cesium from a dispenser oven.

    PubMed

    Fantz, U; Friedl, R; Fröschle, M

    2012-12-01

    This instrument allows controlled evaporation of the alkali metal cesium over a wide range of evaporation rates. The oven has three unique features. The first is an alkali metal reservoir that uses a dispenser as a cesium source. The heating current of the dispenser controls the evaporation rate allowing generation of an adjustable and stable flow of pure cesium. The second is a blocking valve, which is fully metallic as is the body of the oven. This construction both reduces contamination of the dispenser and enables the oven to be operated up to 300 °C, with only small temperature variations (<5 °C). By minimizing the temperature variation, the built up of the alkali metal at a cold spot is significantly hindered. The last feature is an integral surface ionization detector for measuring and controlling the evaporation rate. The dispenser oven can be easily transferred to the other alkali-metals.

  18. Study of radiatively sustained cesium plasmas for solar energy conversion

    NASA Technical Reports Server (NTRS)

    Palmer, A. J.; Dunning, G. J.

    1980-01-01

    The results of a study aimed at developing a high temperature solar electric converter are reported. The converter concept is based on the use of an alkali plasma to serve as both an efficient high temperature collector of solar radiation as well as the working fluid for a high temperature working cycle. The working cycle is a simple magnetohydrodynamic (MHD) Rankine cycle employing a solid electrode Faraday MHD channel. Research milestones include the construction of a theoretical model for coupling sunlight in a cesium plasma and the experimental demonstration of cesium plasma heating with a solar simulator in excellent agreement with the theory. Analysis of a solar MHD working cycle in which excimer laser power rather than electric power is extracted is also presented. The analysis predicts a positive gain coefficient on the cesium-xenon excimer laser transition.

  19. Method for removing cesium from a nuclear reactor coolant

    DOEpatents

    Colburn, R.P.

    1983-08-10

    A method of and system for removing cesium from a liquid metal reactor coolant including a carbon packing trap in the primary coolant system for absorbing a major portion of the radioactive cesium from the coolant flowing therethrough at a reduced temperature. A regeneration subloop system having a secondary carbon packing trap is selectively connected to the primary system for isolating the main trap therefrom and connecting it to the regeneration system. Increasing the temperature of the sodium flowing through the primary trap diffuses a portion of the cesium inventory thereof further into the carbon matrix while simultaneously redispersing a portion into the regeneration system for absorption at a reduced temperature by the secondary trap.

  20. The adsorption of cesium on lanthanum hexaboride surfaces

    NASA Technical Reports Server (NTRS)

    Davis, P. R.; Swanson, L. W.; Chambers, S. A.

    1980-01-01

    The adsorption/desorption characteristics of cesium on clean and oxygen-covered LaB6 (100) surfaces were studied using various surface analysis techniques. On the initially clean surface (phi = 2.77 eV), adsorption produces a minimum work function of 1.96 eV and a saturation work function of 2.07 eV. For the oxygen-saturated surface, the cesium adsorption curve shows no minimum, the lowest work function (1.35 eV) occurring at cesium saturation. The utility of LaB6 (100) as an emitter or collector in thermionic converter applications (particularly for space nuclear electric propulsion) is evaluated.

  1. Applications of cesium in the perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Ye, Fengjun; Yang, Wenqiang; Luo, Deying; Zhu, Rui; Gong, Qihuang

    2017-01-01

    Perovskite solar cells have experienced an unprecedented rapid development in the power conversion efficiency (PCE) during the past 7 years, and the record PCE has been already comparable to the traditional polycrystalline silicon solar cells. Presently, it is more urgent to address the challenge on device stability for the future commercial application. Recently, the inorganic cesium lead halide perovskite has been intensively studied as one of the alternative candidates to improve device stability through controlling the phase transition. The cesium (Cs)-doped perovskites show more superior stability comparing with organic methylammonium (MA) lead halide perovskite or formamidinium (FA) lead halide perovskite. Here, recent progress of the inorganic cesium application in organic–inorganic perovskite solar cells (PSCs) is highlighted from the viewpoints of the device efficiency and the device stability. Project supported by the 973 Program of China (No. 2015CB932203), the National Natural Science Foundation of China (Nos. 61377025, 91433203), and the Young 1000 Talents Global Recruitment Program of China.

  2. Cesium in the Savannah River Site environment

    SciTech Connect

    Carlton, W.H.; Bauer, L.R.; Evans, A.G.; Geary, L.A.; Murphy, C.E. Jr.; Pinder, J.E.; Strom, R.N.

    1992-03-01

    Cesium in the Savannah River Site Environment is published as a part of the Radiological Assessment Program (RAP). It is the fourth in a series of eight documents on individual radioisotopes released to the environment as a result of Savannah River Site (SRS) operations. The earlier documents describe the environmental consequences of tritium, iodine, and uranium. Documents on plutonium, strontium, carbon, and technetium will be published in the future. These are dynamic documents and current plans call for revising and updating each one on a two-year schedule.Radiocesium exists in the environment as a result of above-ground nuclear weapons tests, the Chernobyl accident, the destruction of satellite Cosmos 954, small releases from reactors and reprocessing plants, and the operation of industrial, medical, and educational facilities. Radiocesium has been produced at SRS during the operation of five production reactors. Several hundred curies of {sup 137}Cs was released into streams in the late 50s and 60s from leaking fuel elements. Smaller quantities were released from the fuel reprocessing operations. About 1400 Ci of {sup 137}Cs was released to seepage basins where it was tightly bound by clay in the soil. A much smaller quantity, about four Ci. was released to the atmosphere. Radiocesium concentration and mechanisms for atmospheric, surface water, and groundwater have been extensively studied by Savannah River Technology Center (SRTC) and ecological mechanisms have been studied by Savannah River Ecology Laboratory (SREL). The overall radiological impact of SRS releases on the offsite maximum individual can be characterized by total doses of 033 mrem (atmospheric) and 60 mrem (liquid), compared with a dose of 12,960 mrem from non-SRS sources during the same period of time. Isotope {sup 137}Cs releases have resulted in a negligible risk to the environment and the population it supports.

  3. Cesium in the Savannah River Site environment

    SciTech Connect

    Carlton, W.H.; Bauer, L.R.; Evans, A.G.; Geary, L.A.; Murphy, C.E. Jr.; Pinder, J.E.; Strom, R.N.

    1992-03-01

    Cesium in the Savannah River Site Environment is published as a part of the Radiological Assessment Program (RAP). It is the fourth in a series of eight documents on individual radioisotopes released to the environment as a result of Savannah River Site (SRS) operations. The earlier documents describe the environmental consequences of tritium, iodine, and uranium. Documents on plutonium, strontium, carbon, and technetium will be published in the future. These are dynamic documents and current plans call for revising and updating each one on a two-year schedule.Radiocesium exists in the environment as a result of above-ground nuclear weapons tests, the Chernobyl accident, the destruction of satellite Cosmos 954, small releases from reactors and reprocessing plants, and the operation of industrial, medical, and educational facilities. Radiocesium has been produced at SRS during the operation of five production reactors. Several hundred curies of [sup 137]Cs was released into streams in the late 50s and 60s from leaking fuel elements. Smaller quantities were released from the fuel reprocessing operations. About 1400 Ci of [sup 137]Cs was released to seepage basins where it was tightly bound by clay in the soil. A much smaller quantity, about four Ci. was released to the atmosphere. Radiocesium concentration and mechanisms for atmospheric, surface water, and groundwater have been extensively studied by Savannah River Technology Center (SRTC) and ecological mechanisms have been studied by Savannah River Ecology Laboratory (SREL). The overall radiological impact of SRS releases on the offsite maximum individual can be characterized by total doses of 033 mrem (atmospheric) and 60 mrem (liquid), compared with a dose of 12,960 mrem from non-SRS sources during the same period of time. Isotope [sup 137]Cs releases have resulted in a negligible risk to the environment and the population it supports.

  4. Exotic stable cesium polynitrides at high pressure

    SciTech Connect

    Peng, Feng; Han, Yunxia; Liu, Hanyu; Yao, Yansun

    2015-11-19

    New polynitrides containing metastable forms of nitrogen are actively investigated as potential high energy-density materials. Using a structure search method based on the CALYPSO methodology, we investigated the stable stoichiometries and structures of cesium polynitrides at high pressures. Along with the CsN3, we identified five new stoichiometric compounds (Cs3N, Cs2N, CsN, CsN2, and CsN5) with interesting structures that may be experimentally synthesizable at modest pressures (i.e., less than 50 GPa). Nitrogen species in the predicted structures have various structural forms ranging from single atom (N) to highly endothermic molecules (N2, N3 , N4, N5, N6) and chains (N). Polymeric chains of nitrogen were found in the high-pressure C2/c phase of CsN2. This structure contains a substantially high content of single N-N bonds that exceeds the previously known nitrogen chains in pure forms, and also exhibit metastability at ambient conditions. We also identified a very interesting CsN crystal that contains novel N44- anion. In conclusion, to our best knowledge, this is the first time a charged N4 species being reported. Results of the present study suggest that it is possible to obtain energetic polynitrogens in main-group nitrides under high pressure.

  5. Operational frequency stability of rubidium and cesium frequency standards

    NASA Technical Reports Server (NTRS)

    Lavery, J. E.

    1973-01-01

    The frequency stabilities under operational conditions of several commercially available rubidium and cesium frequency standards were determined from experimental data for frequency averaging times from 10 to the 7th power s and are presented in table and graph form. For frequency averaging times between 10 to the 5th power and 10 to the 7th power s, the rubidium standards tested have a stability of between 10 to the minus 12th power and 5 x 10 to the minus 12th power, while the cesium standards have a stability of between 2 x 10 to the minus 13th power and 5 x 10 to the minus 13th power.

  6. CAFS: A Cesium Atomic Frequency Standard for GPS block IIR

    NASA Technical Reports Server (NTRS)

    Wisnia, Jeffry A.

    1993-01-01

    Kernco, Inc. was selected to design the Cesium Atomic Frequency Standards (CAFS) for the GPS Block IIR NAVSTAR satellites. These spacecraft are scheduled to be launched in the mid-1990's to replenish and upgrade the existing constellation of Global Positioning System satellites. The Block IIR CAFS output frequency is 13.4003378 MHz, the 686th submultiple of the cesium atomic resonance frequency. Using an integer submultiple simplifies the design of the atomic frequency standard's rf multiplier circuits, eliminating the secondary frequency synthesizer needed in previous designs. The GPS Block IIR CAFS design, particularly the improvements made on our earlier Block II design is described. Test results are included.

  7. Selective chemical binding enhances cesium tolerance in plants through inhibition of cesium uptake.

    PubMed

    Adams, Eri; Chaban, Vitaly; Khandelia, Himanshu; Shin, Ryoung

    2015-03-05

    High concentrations of cesium (Cs(+)) inhibit plant growth but the detailed mechanisms of Cs(+) uptake, transport and response in plants are not well known. In order to identify small molecules with a capacity to enhance plant tolerance to Cs(+), chemical library screening was performed using Arabidopsis. Of 10,000 chemicals tested, five compounds were confirmed as Cs(+) tolerance enhancers. Further investigation and quantum mechanical modelling revealed that one of these compounds reduced Cs(+) concentrations in plants and that the imidazole moiety of this compound bound specifically to Cs(+). Analysis of the analogous compounds indicated that the structure of the identified compound is important for the effect to be conferred. Taken together, Cs(+) tolerance enhancer isolated here renders plants tolerant to Cs(+) by inhibiting Cs(+) entry into roots via specific binding to the ion thus, for instance, providing a basis for phytostabilisation of radiocesium-contaminated farmland.

  8. Selective chemical binding enhances cesium tolerance in plants through inhibition of cesium uptake

    NASA Astrophysics Data System (ADS)

    Adams, Eri; Chaban, Vitaly; Khandelia, Himanshu; Shin, Ryoung

    2015-03-01

    High concentrations of cesium (Cs+) inhibit plant growth but the detailed mechanisms of Cs+ uptake, transport and response in plants are not well known. In order to identify small molecules with a capacity to enhance plant tolerance to Cs+, chemical library screening was performed using Arabidopsis. Of 10,000 chemicals tested, five compounds were confirmed as Cs+ tolerance enhancers. Further investigation and quantum mechanical modelling revealed that one of these compounds reduced Cs+ concentrations in plants and that the imidazole moiety of this compound bound specifically to Cs+. Analysis of the analogous compounds indicated that the structure of the identified compound is important for the effect to be conferred. Taken together, Cs+ tolerance enhancer isolated here renders plants tolerant to Cs+ by inhibiting Cs+ entry into roots via specific binding to the ion thus, for instance, providing a basis for phytostabilisation of radiocesium-contaminated farmland.

  9. Selective oxidation of bromide in wastewater brines from hydraulic fracturing.

    PubMed

    Sun, Mei; Lowry, Gregory V; Gregory, Kelvin B

    2013-07-01

    Brines generated from oil and natural gas production, including flowback water and produced water from hydraulic fracturing of shale gas, may contain elevated concentrations of bromide (~1 g/L). Bromide is a broad concern due to the potential for forming brominated disinfection byproducts (DBPs) during drinking water treatment. Conventional treatment processes for bromide removal is costly and not specific. Selective bromide removal is technically challenging due to the presence of other ions in the brine, especially chloride as high as 30-200 g/L. This study evaluates the ability of solid graphite electrodes to selectively oxidize bromide to bromine in flowback water and produced water from a shale gas operation in Southwestern PA. The bromine can then be outgassed from the solution and recovered, as a process well understood in the bromine industry. This study revealed that bromide may be selectively and rapidly removed from oil and gas brines (~10 h(-1) m(-2) for produced water and ~60 h(-1) m(-2) for flowback water). The electrolysis occurs with a current efficiency between 60 and 90%, and the estimated energy cost is ~6 kJ/g Br. These data are similar to those for the chlor-alkali process that is commonly used for chlorine gas and sodium hydroxide production. The results demonstrate that bromide may be selectively removed from oil and gas brines to create an opportunity for environmental protection and resource recovery.

  10. Chloride, bromide and iodide scintillators with europium

    DOEpatents

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  11. Distribution of radioactive cesium in edible parts of cattle.

    PubMed

    Okada, Keiji; Sato, Itaru; Deguchi, Yoshitaka; Morita, Shigeru; Yasue, Takeshi; Yayota, Masato; Takeda, Ken-Ichi; Sato, Shusuke

    2013-12-01

    After the disastrous incident of the Fukushima Daiichi Nuclear Power Station, various agricultural, livestock and fishery products have been inspected for radioactive contamination with cesium in Japan. In this study, radioactive cesium was measured in various edible parts of cattle to verify the current inspection method for cattle, in which the neck tissues are generally used as samples. Radioactive cesium concentration in the short plate, diaphragm, liver, lung, omasum, abomasum and small intestine were lower and sirloin, tenderloin, top round meat and tongue were higher than that in the neck. There was no significant difference between the other organs (heart, kidney, lumen and reticulum) and the neck. Ninety-five percent upper tolerance limits of the relative concentration to the neck were 1.88 for sirloin, 1.74 for tenderloin, 1.87 for top round and 1.45 for tongue. These results suggest that a safety factor of 2 is recommended for the radioactivity inspection of cattle to prevent a marketing of meat with higher cesium than the legal limit. Re-inspection should be conducted using another part of muscle, for example, top round, when suspicious levels of 50-100 Bq/kg are detected in the neck.

  12. Cesium-137 accumulation in higher plants before and after Chernobyl

    SciTech Connect

    Sawidis, T.; Drossos, E.; Papastefanou, C. ); Heinrick, G. )

    1990-01-01

    Cesium-137 concentrations in plant species of three biotypes of northern Greece, differing in location as well as in vegetation, are reported following the Chernobyl reactor accident. The cesium uptake by plants was due to the foliar deposition rather than the root uptake. The highest level of cesium in plants was found in Ranunculus sardous, a pubescent plant. The {sup 137}Cs concentration was about 22kBq kg{sup {minus}1}d.w. A high level of cesium was also found in Salix alba ({sup 137}Cs: 19.6 kBq kg{sup {minus}1} d.w.), a deciduous tree showing that hairy leaves or leaves having rough and large surfaces can absorb greater amounts of radioactivity (surface effect). A comparison is also made between the results of measurements of the present study and the results of measurements of some herbarium plants collected one year before the accident as well as the results of measurements of some new plants grown and collected one year after the accident resulting in a natural removal rate of {sup 137}Cs in plants varying from 14 to 130 days.

  13. Infrared generation and wave-mixing studies in cesium

    SciTech Connect

    Christian, W.; Stockdale, J.A.D.; Dodhy, A.; Compton, R.N.

    1985-01-01

    A Nd-YAG pumped dye laser and heat pipe has been used to investigate stimulated infrared production, wave mixing, and ionization in cesium vapor near the one-photon resonant 7P/sub 1/2,3/2/ fine structure states.

  14. Validation and Application of Concentrated Cesium Eluate Physical Property Models

    SciTech Connect

    Choi, A.S.

    2004-03-18

    This work contained two objectives. To verify the mathematical equations developed for the physical properties of concentrated cesium eluate solutions against experimental test results obtained with simulated feeds. To estimate the physical properties of the radioactive AW-101 cesium eluate at saturation using the validated models. The Hanford River Protection Project (RPP) Hanford Waste Treatment and Immobilization Plant (WTP) is currently being built to extract radioisotopes from the vast inventory of Hanford tank wastes and immobilize them in a silicate glass matrix for eventual disposal at a geological repository. The baseline flowsheet for the pretreatment of supernatant liquid wastes includes removal of cesium using regenerative ion-exchange resins. The loaded cesium ion-exchange columns will be eluted with nitric acid nominally at 0.5 molar, and the resulting eluate solution will be concentrated in a forced-convection evaporator to reduce the storage volume and to recover the acid for reuse. The reboiler pot is initially charged with a concentrated nitric acid solution and kept under a controlled vacuum during feeding so the pot contents would boil at 50 degrees Celsius. The liquid level in the pot is maintained constant by controlling both the feed and boilup rates. The feeding will continue with no bottom removal until the solution in the pot reaches the target endpoint of 80 per cent saturation with respect to any one of the major salt species present.

  15. Hot demonstration of proposed commercial cesium removal technology

    SciTech Connect

    Lee, D.D.; Travis, J.R.; Gibson, M.R.

    1997-12-01

    This report describes the work done in support of the development of technology for the continuous removal and concentration of radioactive cesium in supernatant from Melton Valley Storage Tanks (MVSTs) at the ORNL site. The primary objective was to test candidate absorbers and ion exchangers under continuous-flow conditions using actual supernatant from the MVSTs. An experimental system contained in a hot-cell facility was constructed to test the materials in columns or modules using the same batch of supernatant to allow comparison on an equal basis. Resorcinol/formaldehyde (RF) resin was evaluated at three flow rates with 50% breakthrough ranges of 35 to 50 column volumes (CV) and also through a series of five loading/elution/regeneration cycles. The results reported here include the cesium loading breakthrough curves, elution curves (when applicable), and operational problems and observations for each material. The comparative evaluations should provide critical data for the selection of the sorbent for the ORNL Cesium Removal Demonstration project. These results will be used to help determine the design parameters for demonstration-scale systems. Such parameters include rates of cesium removal, quantity of resin or sorbent to be used, and elution and regeneration requirements, if applicable.

  16. Preparation of cesium targets for gamma-spectroscopic studies

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, S.; Basu, S. K.; Chanda, S.; Deb, P.; Eqbal, Md; Kundu, S.; Joseph, D.

    2000-11-01

    A procedure to prepare monoisotopic cesium compound targets for gamma-spectroscopic experiments is described. Using this procedure, uniform targets up to thicknesses of 0.6-1.2 mg/cm 2 were prepared and used for in-beam spectroscopic studies. The purity of the target was tested by energy dispersive X-ray fluorescence (EDXRF) measurements.

  17. Membrane-based separation technologies for cesium, strontium, and technetium

    SciTech Connect

    Kafka, T.

    1996-10-01

    This work is one of two parallel projects that are part of an ESP task to develop high-capacity, selective, solid extractants for cesium, strontium, and technetium from nuclear wastes. In this subtask, Pacific Northwest National Laboratory (PNNL) is collaborating with 3M, St. Paul, Minnesota, working in cooperation with IBC Advanced Technologies, American Fork, Utah.

  18. Cesium Ion Exchange Using Tank 241-AN-104 Supernate

    SciTech Connect

    Adu-Wusu, K.

    2003-12-22

    The River Protection Project is to design and build a high level nuclear waste treatment facility. The waste treatment plant is to process millions of gallons of radioactive waste stored in tanks at the Hanford Site. The high level nuclear waste treatment process includes various unit operations, such as ultrafiltration, precipitation, evaporation, ion exchange, and vitrification. Ion exchange is identified as the optimal treatment method for removal of cesium-137 and Tc-99 from the waste. Extensive ion exchange testing was performed using small-scale columns with actual waste samples. The objectives of this study were to: demonstrate SuperLig 644 ion exchange performance and process steps for the removal of cesium from actual AN-104 tank waste; pretreat actual AN-104 tank waste to reduce the concentration of cesium-137 in the waste below LAW vitrification limit; produce and characterize cesium eluate solutions for use in eluate evaporation tests. The experiments consisted of batch contact and small-scale column tests. The batch contact tests measured sorption partition coefficients Kds. The Kds were used to predict the effective resin capacity. The small-scale column tests, which closely mimic plant conditions, generated loading and elution profile data used to determine whether removal targets and design requirements were met.

  19. Physical property measurements of doped cesium iodide crystals

    NASA Technical Reports Server (NTRS)

    Synder, R. S.; Clotfelter, W. N.

    1974-01-01

    Mechanical and thermal property values are reported for crystalline cesium iodide doped with sodium and thallium. Young's modulus, bulk modulus, shear modulus, and Poisson's ratio were obtained from ultrasonic measurements. Young's modulus and the samples' elastic and plastic behavior were also measured under tension and compression. Thermal expansion and thermal conductivity were the temperature dependent measurements that were made.

  20. Discovery of cesium, lanthanum, praseodymium and promethium isotopes

    SciTech Connect

    May, E.; Thoennessen, M.

    2012-09-15

    Currently, forty-one cesium, thirty-five lanthanum, thirty-two praseodymium, and thirty-one promethium isotopes have been observed and the discovery of these isotopes is described here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

  1. Sediment source determination using fallout Cesium-137 in arid rangelands.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Sediment source identification in arid rangelands is necessary to understanding rangeland conditions and developing management practices to improve rangeland health and reduce sediment load to streams. The purpose of this research was to use Cesium-137 to identify sources of sediments in an arid ran...

  2. REMOVAL OF CESIUM FROM AQUEOUS SOLUTIONS BY ADSORPTION

    DOEpatents

    Knoll, K.C.

    1963-07-16

    A process of removing microquantities of cesium from aqueous solutions also containing macroquantities of other ions by adsorption on clinoptilolite is described. The invention resides in the pretreatment of the clinoptilolite by heating at 400 deg C and cooling prior to use. (AEC)

  3. Cesium-induced QT-interval prolongation in an adolescent.

    PubMed

    O'Brien, Catherine E; Harik, Nada; James, Laura P; Seib, Paul M; Stowe, Cindy D

    2008-08-01

    Alternative medicine is becoming increasingly popular, especially with terminally ill patients. Most alternative remedies have not been adequately studied or proven effective for the diseases for which they are promoted. In the worst cases, these therapies are harmful. We describe a 16-year-old girl with metastatic hepatocellular carcinoma who experienced cesium-induced QT-interval prolongation after the start of a cesium chloride-based alternative treatment regimen. She had received seven courses of chemotherapy, with a cumulative doxorubicin dose of 500 mg/m(2) over 5 months, resulting in minimal tumor regression. Against the advice of her oncologist, she abandoned traditional therapy and started an alternative regimen that included cesium chloride supplements. Two weeks later, the patient went to a local emergency department after experiencing two brief syncopal episodes. An electrocardiogram revealed occasional premature ventricular contractions, a QTc interval of 683 msec (normal range for females 450-460 msec), and R on T phenomenon. She was admitted to the hospital and later experienced monomorphic ventricular tachycardia, which resolved spontaneously. Lidocaine therapy was started, and the patient was transferred to a cardiac intensive care unit at our hospital. Her plasma cesium level was 2400 microg/dl (normal < 1 microg/dl), and her family was told to stop her alternative treatment regimen. On hospital day 5, as no additional arrhythmias had occurred, lidocaine was discontinued. Two days later, the patient's QTc interval had decreased to 546 msec, and she was discharged home. Two months later, at a follow-up visit, her serum cesium level was 1800 microg/dl, and her QTc interval was 494 msec. According to the Naranjo adverse drug reaction probability scale, cesium was the probable cause of the patient's arrhythmia. In animal models, cesium chloride has induced cardiac arrhythmias, including torsade de pointes. It inhibits delayed rectifier potassium

  4. Quantitative determination of cesium binding to ferric hexacyanoferrate: Prussian blue.

    PubMed

    Faustino, Patrick J; Yang, Yongsheng; Progar, Joseph J; Brownell, Charles R; Sadrieh, Nakissa; May, Joan C; Leutzinger, Eldon; Place, David A; Duffy, Eric P; Houn, Florence; Loewke, Sally A; Mecozzi, Vincent J; Ellison, Christopher D; Khan, Mansoor A; Hussain, Ajaz S; Lyon, Robbe C

    2008-05-12

    Ferric hexacyanoferrate (Fe4III[FeII(CN)6]3), also known as insoluble Prussian blue (PB) is the active pharmaceutical ingredient (API) of the drug product, Radiogardase. Radiogardase is the first FDA approved medical countermeasure for the treatment of internal contamination with radioactive cesium (Cs) or thallium in the event of a major radiological incident such as a "dirty bomb". A number of pre-clinical and clinical studies have evaluated the use of PB as an investigational decorporation agent to enhance the excretion of metal cations. There are few sources of published in vitro data that detail the binding capacity of cesium to insoluble PB under various chemical and physical conditions. The study objective was to determine the in vitro binding capacity of PB APIs and drug products by evaluating certain chemical and physical factors such as medium pH, particle size, and storage conditions (temperature). In vitro experimental conditions ranged from pH 1 to 9, to cover the range of pH levels that PB may encounter in the gastrointestinal (GI) tract in humans. Measurements of cesium binding were made between 1 and 24h, to cover gastric and intestinal tract residence time using a validated atomic emission spectroscopy (AES) method. The results indicated that pH, exposure time, storage temperature (affecting moisture content) and particle size play significant roles in the cesium binding to both the PB API and the drug product. The lowest cesium binding was observed at gastric pH of 1 and 2, whereas the highest cesium binding was observed at physiological pH of 7.5. It was observed that dry storage conditions resulted in a loss of moisture from PB, which had a significant negative effect on the PB cesium binding capacity at time intervals consistent with gastric residence. Differences were also observed in the binding capacity of PB with different particle sizes. Significant batch to batch differences were also observed in the binding capacity of some PB API and

  5. Methyl Bromide Commodity Fumigation Buffer Zone Lookup Tables

    EPA Pesticide Factsheets

    Product labels for methyl bromide used in commodity and structural fumigation include requirements for buffer zones around treated areas. The information on this page will allow you to find the appropriate buffer zone for your planned application.

  6. 7 CFR 305.6 - Methyl bromide fumigation treatment schedules.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., fumigation with methyl bromide for sapote fruit fly. Regulated citrus fruits originating inside an area quarantined for sapote fruit fly that are to be moved outside the quarantined area may be treated with...

  7. Computational and vibrational spectroscopic studies of ipratropium bromide.

    PubMed

    Ali, H R H; Edwards, H G M; Kendrick, J; Scowen, I J

    2009-02-01

    In this study, ipratropium bromide is investigated using vibrational spectroscopy and quantum chemical calculations. The structure of ipratropium bromide was optimised using density functional theory calculations and the geometry optimisation has been carried out on two conformations with and without intramolecular hydrogen bonding. Infrared and Raman spectra were calculated from the optimised structures. Many modes in the calculated spectra could be matched with the experimental spectra and a description of the modes is given. By analysis of the theoretical vibrational modes, it is shown that ipratropium bromide specimens are likely to be a mixture of the two conformations with and without intramolecular hydrogen bonding. In addition, several spectral features and band intensities in the CH and OH stretching regions are explained. Quantum mechanical calculations allowed improved understanding of ipratropium bromide and its vibrational spectra.

  8. Pd-Catalyzed Nucleophilic Fluorination of Aryl Bromides

    PubMed Central

    2015-01-01

    On the basis of mechanism-driven reaction design, a Pd-catalyzed nucleophilic fluorination of aryl bromides and iodides has been developed. The method exhibits a broad substrate scope, especially with respect to nitrogen-containing heteroaryl bromides, and proceeds with minimal formation of the corresponding reduction products. A facilitated ligand modification process was shown to be critical to the success of the reaction. PMID:24559304

  9. Synthesis, self-aggregation and biological properties of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride.

    PubMed

    Lukáč, Miloš; Mrva, Martin; Garajová, Mária; Mojžišová, Gabriela; Varinská, Lenka; Mojžiš, Ján; Sabol, Marián; Kubincová, Janka; Haragová, Hana; Ondriska, František; Devínsky, Ferdinand

    2013-08-01

    A series of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride have been synthesized. Their physicochemical properties were also investigated. The critical micelle concentration (cmc), the surface tension value at the cmc (γcmc), and the surface area at the surface saturation per head group (Acmc) were determined by means of surface tension measurements. The prepared compounds exhibit significant cytotoxic, antifungal and antiprotozoal activities. Alkylphosphocholines and alkylphosphohomocholines possess higher antifungal activity against Candida albicans in comparison with quaternary ammonium compounds in general. However, quaternary ammonium compounds exhibit significantly higher activity against human tumor cells and pathogenic free-living amoebae Acanthamoeba lugdunensis and Acanthamoeba quina compared to alkylphosphocholines. The relationship between structure, physicochemical properties and biological activity of the tested compounds is discussed.

  10. Spectral characteristics of the bentonite loaded with benzyldimethyloctadecylammonium chloride, hexadecyltrimethylammonium bromide and dimethyldioctadecylammonium bromide

    NASA Astrophysics Data System (ADS)

    Majdan, Marek; Maryuk, Oksana; Gładysz-Płaska, Agnieszka; Pikus, Stanisław; Kwiatkowski, Ryszard

    2008-02-01

    The spectral characterization, including the FTIR, DRIFT (diffusive reflectance), SWAXS (small and wide angle X-ray scattering) spectra comparison of the sodium bentonite modified by BDMODA-Cl (benzyldimethyloctadecylammonium chloride), HDTMA-Br (hexadecyltrimethylammonium bromide), DDA-Br (dimethyldioctadecylammonium bromide) is presented in the paper. The FTIR spectra show the shift of C-H stretching vibrations: νsym(CH2), νasym(CH2) of surfactants methylene chains toward lower frequencies (from 2855 to 2851 cm -1 for νsym(CH2) and from 2927 to 2918 cm -1 for νansym(CH2) with the surfactant concentration in bentonite phase. The bending vibrations δH-O-H in water molecules change their positions in the direction of higher frequencies (from 1634 to 1647 cm -1) with the surfactant concentration for bentonite-BDMODA and bentonite-DDA contrary to bentonite-HDTMA, where the constant position δH-O-H is explained as the consequence of the lower concentration of the hydrogen bonded water in bentonite-HDTMA phase when compared with the remaining forms of bentonite. The DRIFT spectra reveal dramatic shift of the νSi-O stretching vibration toward higher frequencies upon intercalation of the sodium bentonite with the surfactant cations. The SWAXS spectra and SEM images of the bentonite are the evidence of somewhat different sorption mechanism of DDA-Br when compared with the BDMODA-Cl and HDTMA-Br, including remarkable external surface sorption contribution in the overall sorption.

  11. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... pounds) water capacity (nominal). This capacity does not apply to shipments of methyl bromide. (c) Methyl... metal cans containing not over one pound each, or inside metal cans with a minimum wall thickness of...

  12. Desorption of intrinsic cesium from smectite: inhibitive effects of clay particle organization on cesium desorption.

    PubMed

    Fukushi, Keisuke; Sakai, Haruka; Itono, Taeko; Tamura, Akihiro; Arai, Shoji

    2014-09-16

    Fine clay particles have functioned as transport media for radiocesium in terrestrial environments after nuclear accidents. Because radiocesium is expected to be retained in clay minerals by a cation-exchange reaction, ascertaining trace cesium desorption behavior in response to changing solution conditions is crucially important. This study systematically investigated the desorption behavior of intrinsic Cs (13 nmol/g) in well-characterized Na-montmorillonite in electrolyte solutions (NaCl, KCl, CaCl2, and MgCl2) under widely differing cation concentrations (0.2 mM to 0.2 M). Batch desorption experiments demonstrated that Cs(+) desorption was inhibited significantly in the presence of the environmental relevant concentrations of Ca(2+) and Mg(2+) (>0.5 mM) and high concentrations of K(+). The order of ability for Cs desorption was Na(+) = K(+) > Ca(2+) = Mg(2+) at the highest cation concentration (0.2 M), which is opposite to the theoretical prediction based on the cation-exchange selectivity. Laser diffraction grain-size analyses revealed that the inhibition of Cs(+) desorption coincided with the increase of the clay tactoid size. Results suggest that radiocesium in the dispersed fine clay particles adheres on the solid phase when the organization of swelling clay particles occurs because of changes in solution conditions caused by both natural processes and artificial treatments.

  13. Alkene- and alkyne- substituted methylimidazolium bromides: structural effects and Physical properties (Postprint)

    DTIC Science & Technology

    2007-08-01

    1, 3 - butene - 2 , propargyl- 3 , 2 -butyne- 4, and 2 -pent- yne- 5 side chains and their structural and physical proper- ties have been investigated...pargyl bromide, 2 -butyne bromide, 3 - butene bromide and 2 -pen- tyne bromide), methanol (99.93 % A.C.S. HPLC grade) and diethyl ether (anhydrous, 99...zolium halides (X Cl, Br, I), and 1-( 2 -butyne)- 3 - methyl - imidazolium bromide have been mentioned earlier [20, 21, 2328, 38, 39]. However, detailed

  14. Characterization of high cesium containing glass-bonded ceramic waste forms.

    SciTech Connect

    Lambregts, M. J.; Frank, S. M.

    2003-10-03

    High cesium containing glass-bonded ceramic waste form samples were prepared and characterized to identify possible cesium phases present in glass-bonded ceramic waste forms developed for the containment of fission product bearing salts. Major phases of the waste forms are sodalite and glass. A combination of powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance spectroscopy (NMR) were used to study the multiphase nature of these waste forms. Cesium was found to be present in the higher loaded waste forms in a cesium aluminosilicate phase with an analcime structure and a 1:1 Si:Al ratio, a pollucite phase, and also in the glass phase. The glass phase contains the majority of the cesium at lower loadings, however some pollucite also remains. Cesium was not detected in the sodalite phase of any of the samples.

  15. Method and article for primary containment of cesium wastes. [DOE patent application

    DOEpatents

    Angelini, P.; Lackey, W.J.; Stinton, D.P.; Blanco, R.E.; Bond, W.D.; Arnold, W.D. Jr.

    1981-09-03

    A method for producing a cesium-retentive waste form, characterized by a high degree of compositional stability and mechanical integrity, is provided by subjecting a cesium-loaded zeolite to heat under conditions suitable for stabilizing the zeolite and immobilizing the cesium, and coating said zeolite for sufficient duration within a suitable environment with at least one dense layer of pyrolytic carbon to seal therein said cesium to produce a final, cesium-bearing waste form. Typically, the zolite is stabilized and the cesium immobilized in less than four hours by confinement within an air environment maintained at about 600/sup 0/C. Coatings are thereafter applied by confining the calcined zeolite within a coating environment comprising inert fluidizing and carbon donor gases maintained at 1000/sup 0/C for a suitable duration.

  16. Nutrients and cancer: an introduction to cesium therapy.

    PubMed

    Sartori, H E

    1984-01-01

    A brief overview on the relevance in dietary factors in both development and prevention of cancer is presented. The pharmacologic properties of various food ingredients are discussed. Establishing of a special diet for the cancer patient is suggested. In addition, avoidance of certain foods is recommended to counteract mucus production of cancer cells. Evaluation of the nutrient content of certain diets in regions with low incidence of cancer has advanced the use of certain alkali metals, i.e., rubidium and cesium, as chemotherapeutic agents. The rationale for this approach termed the "high pH" therapy resides in changing the acidic pH range of the cancer cell by cesium towards weak alkalinity in which the survival of the cancer cell is endangered, and the formation of acidic and toxic materials, normally formed in cancer cells, is neutralized and eliminated.

  17. Leachate tests with sewage sludge contaminated by radioactive cesium.

    PubMed

    Tsushima, Ikuo; Ogoshi, Masashi; Harada, Ichiro

    2013-01-01

    The sewer systems of eastern Japan have transported radioactive fallout from the Fukushima Dai-ichi nuclear power plant accident to wastewater treatment plants, where the radioisotopes have accumulated. To better understand the potential problems associated with the disposal of contaminated sewage sludge in landfills, leachate tests were conducted with radioactive incinerator ash, cement solidification incinerator ash, and dewatered sludge cake. Radioactivity was undetectable in the eluate from incinerator ash and dewatered sludge cake, but about 30% of the radioactivity initially in cement solidification incinerator ash appeared in the eluate during the leaching experiments. Moreover, modification of test conditions revealed that the presence of Ca(2+) ions and strong alkali in the water that contacted the incinerator ash enhanced leaching of cesium. Lastly, the capacity of pit soil to absorb radioactive cesium was estimated to be at least 3.0 Bq/g (dry).

  18. Test procedures and instructions for Hanford tank waste supernatant cesium removal

    SciTech Connect

    Hendrickson, D.W., Westinghouse Hanford

    1996-05-31

    This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test using Hanford Double-Shell Slurry Feed supernatant liquor from tank 251-AW-101 in a bench-scale column.Cesium sorbents to be tested include resorcinol-formaldehyde resin and crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-022, Hanford Tank Waste Supernatant Cesium Removal Test Plan.

  19. Test procedures and instructions for Hanford complexant concentrate supernatant cesium removal using CST

    SciTech Connect

    Hendrickson, D.W.

    1997-01-08

    This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test, using Hanford Complexant Concentrate supernatant liquor from tank 241-AN-107, in a bench-scale column. The cesium sorbent to be tested is crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-023, Hanford Complexant Concentrate Supernatant Cesium Removal Test Plan.

  20. Detection of the actinides and cesium from environmental samples

    NASA Astrophysics Data System (ADS)

    Snow, Mathew Spencer

    Detection of the actinides and cesium in the environment is important for a variety of applications ranging from environmental remediation to safeguards and nuclear forensics. The utilization of multiple different elemental concentrations and isotopic ratios together can significantly improve the ability to attribute contamination to a unique source term and/or generation process; however, the utilization of multiple elemental "signatures" together from environmental samples requires knowledge of the impact of chemical fractionation for various elements under a variety of environmental conditions (including predominantly aqueous versus arid conditions). The research reported in this dissertation focuses on three major areas: 1. Improving the understanding of actinide-mineral interactions at ultra-low concentrations. Chapter 2 reports a batch sorption and modeling study of Np(V) sorption to the mineral goethite from attomolar to micromolar concentrations. 2. Improving the detection capabilities for Thermal Ionization Mass Spectrometry (TIMS) analyses of ultra-trace cesium from environmental samples. Chapter 4 reports a new method which significantly improves the chemical yields, purification, sample processing time, and ultimately, the detection limits for TIMS analyses of femtogram quantities of cesium from a variety of environmental sample matrices. 3. Demonstrating how actinide and cesium concentrations and isotopic ratios from environmental samples can be utilized together to determine a wealth of information including environmental transport mechanisms (e.g. aqueous versus arid transport) and information on the processes which generated the original material. Chapters1, 3 and 5 demonstrate these principles using Pu, Am, Np, and Cs concentrations and isotopic ratios from contaminated soils taken near the Subsurface Disposal Area (SDA) of Idaho National Laboratory (INL) (a low level radioactive waste disposal site in southeastern Idaho).

  1. Extraction of cesium and strontium from nuclear waste

    DOEpatents

    Davis, Jr., Milton W.; Bowers, Jr., Charles B.

    1988-01-01

    Cesium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4'(5) [1-hydroxy-2-ethylhexyl]benzo 18-crown-6 compound and a cation exchanger in a matrix solution. Strontium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4'(5') [1-hydroxyheptyl]cyclohexo 18-crown-6 compound, and a cation exchanger in a matrix solution.

  2. Extraction of cesium and strontium from nuclear waste

    DOEpatents

    Davis, M.W. Jr.; Bowers, C.B. Jr.

    1988-06-07

    Cesium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4[prime](5) [1-hydroxy-2-ethylhexyl]benzo 18-crown-6 compound and a cation exchanger in a matrix solution. Strontium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4[prime](5[prime]) [1-hydroxyheptyl]cyclohexo 18-crown-6 compound, and a cation exchanger in a matrix solution. 3 figs.

  3. The Effects of Ambient Conditions of Cesium Clock Rates

    DTIC Science & Technology

    1987-12-01

    THE EFFECTS OF AMBIENT CONDITIONS ON CESIUM CLOCK RATES Lee A. Breakiron U.S. Naval Observatory Time Service Department 34th and Massachusetts...information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and...NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Naval Observatory, Time Service Department,34th and

  4. Ion exchange of cesium by crystalline silico-titanates

    SciTech Connect

    Zheng, Zhixin; Anthony, R.G.; Miller, J.E.; Trudell, D.

    1995-12-01

    The crystalline silico-titanates developed by the Department of Chemical Engineering at Texas A&M University, Sandia National Laboratories and UOP exhibits extremely high ion exchange selectivity for removing cesium from aqueous defense wastes. Based on experimental data and structure studies, a competitive ion exchange model was proposed to predict the ion exchange performance in different simulated waste solutions. The predicted distribution coefficients were within 10% of the experimentally determined values.

  5. Excited State Electronic Properties of Sodium Iodide and Cesium Iodide

    SciTech Connect

    Campbell, Luke W.; Gao, Fei

    2013-05-01

    We compute from first principles the dielectric function, loss function, lifetime and scattering rate of quasiparticles due to electronic losses, and secondary particle spectrum due to plasmon decay in two scintillating alkali halides, sodium iodide and cesium iodide. Particular emphasis is placed on quasiparticles within several multiples of the band gap from the band edges. A theory for the decay spectra of plasmons and other electronic excitations in crystals is presented. Applications to Monte Carlo radiation transport codes are discussed.

  6. X-ray spectrographic determination of cesium and rubidium

    USGS Publications Warehouse

    Axelrod, J.M.; Adler, I.

    1957-01-01

    An x-ray spectrographic method for the determination of rubidium and cesium was developed, using the internal-standard method and a four-channel flat-crystal spectrograph. The sensitivity is within 0.1% for cesia and 0.02% for rubidia; the precision is within 10% of the amount present. Results agree well with those obtained by flame photometry and by radio-activation.

  7. Cesium pentazolate: A new nitrogen-rich energetic material

    NASA Astrophysics Data System (ADS)

    Steele, Brad A.; Stavrous, Elissaios; Prakapenka, Vitali B.; Radousky, Harry; Zaug, Joseph; Crowhurst, Jonathan C.; Oleynik, Ivan I.

    2017-01-01

    We report theoretical and experimental evidence for a new class of high-nitrogen content energetic material compounds consisting of molecular pentazoles, which are stabilized in the crystal phase upon introduction of elemental cesium. First-principles structural predictions show that the material with composition CsN5 is thermodynamically stable above 15 GPa. Indexing of the measured X-ray diffraction spectra indicate the synthesis of this material at 60 GPa as well its stability upon decompression down to 24 GPa.

  8. Effect of illite particle shape on cesium sorption

    USGS Publications Warehouse

    Rajec, P.; Sucha, V.; Eberl, D.D.; Srodon, J.; Elsass, F.

    1999-01-01

    Samples containing illite and illite-smectite, having different crystal shapes (plates, "barrels", and filaments), were selected for sorption experiments with cesium. There is a positive correlation between total surface area and Cs-sorption capacity, but no correlation between total surface area and the distribution coefficient, Kd. Generally Kd increases with the edge surface area, although "hairy" (filamentous) illite does not fit this pattern, possibly because elongation of crystals along one axis reduces the number of specific sorption sites.

  9. Zinc Bromide Combustion: Implications for the Consolidated Incinerator Facility

    SciTech Connect

    Oji, L.N.

    1998-12-16

    In the nuclear industry, zinc bromide (ZnBr2) is used for radiation shielding. At Savannah River Site (SRS) zinc bromide solution, in appropriate configurations and housings, was used mainly for shielding in viewing windows in nuclear reactor and separation areas. Waste stream feeds that will be incinerated at the CIF will occasionally include zinc bromide solution/gel matrices.The CIF air pollution systems control uses a water-quench and steam atomizer scrubber that collects salts, ash and trace metals in the liquid phase. Water is re-circulated in the quench unit until a predetermined amount of suspended solids or dissolved salts are present. After reaching the threshold limit, "dirty liquid", also called "blowdown", is pumped to a storage tank in preparation for treatment and disposal. The air pollution control system is coupled to a HEPA pre-filter/filter unit, which removes particulate matter from the flue gas stream (1).The objective of this report is to review existing literature data on the stability of zinc bromide (ZnBr2) at CIF operating temperatures (>870 degrees C (1600 degrees F) and determine what the combustion products are in the presence of excess air. The partitioning of the combustion products among the quencher/scrubber solution, bottom ash and stack will also be evaluated. In this report, side reactions between zinc bromide and its combustion products with fuel oil were not taken into consideration.

  10. Methyl bromide: effective pest management tool and environmental threat.

    PubMed

    Thomas, W B

    1996-12-01

    Methyl bromide is used extensively on a global basis as a pesticide against nematodes, weeds, insects, fungi, bacteria, and rodents. As a soil fumigant, it is used in significant quantities in the production of strawberry and tomato, as well as other agriculture commodities. Grain, fresh fruit, forestry products, and other materials are fumigated with methyl bromide to control pest infestations during transport and storage. Structures also are treated with this chemical to control wood-destroying insects and rodents. However, methyl bromide has been identified as a significant ozone-depleting substance, resulting in regulatory actions being taken by the U.S. Environmental Protection Agency and the United Nations Environment Program (Montreal Protocol). The science linking methyl bromide to ozone depletion is strong and was reinforced by the 1994 UNEP Montreal Protocol Science Assessment on Ozone Depletion, which states, "Methyl bromide continues to be viewed as a significant ozone-depleting compound." Identifying efficacious and viable alternatives in the near term is critical.

  11. Cross-coupling of aromatic bromides with allylic silanolate salts.

    PubMed

    Denmark, Scott E; Werner, Nathan S

    2008-12-03

    The sodium salts of allyldimethylsilanol and 2-butenyldimethylsilanol undergo palladium-catalyzed cross-coupling with a wide variety of aryl bromides to afford allylated and crotylated arenes. The coupling of both silanolates required extensive optimization to deliver the expected products in high yields. The reaction of the allyldimethylsilanolate takes place at 85 degrees C in 1,2-dimethoxyethane with allylpalladium chloride dimer (2.5 mol %) to afford 73-95% yields of the allylation products. Both electron-rich and sterically hindered bromides reacted smoothly, whereas electron-poor bromides cross-coupled in poor yield because of a secondary isomerization to the 1-propenyl isomer (and subsequent polymerization). The 2-butenyldimethylsilanolate (E/Z, 80:20) required additional optimization to maximize the formation of the branched (gamma-substitution) product. A remarkable influence of added alkenes (dibenzylideneacetone and norbornadiene) led to good selectivities for electron-rich and electron-poor bromides in 40-83% yields. However, bromides containing coordinating groups (particularly in the ortho position) gave lower, and in one case even reversed, selectivity. Configurationally homogeneous (E)-silanolates gave slightly higher gamma-selectivity than the pure (Z)-silanolates. A unified mechanistic picture involving initial gamma-transmetalation followed by direct reductive elimination or sigma-pi isomerization can rationalize all of the observed trends.

  12. Methyl Bromide: Effective Pest Management Tool and Environmental Threat

    PubMed Central

    Thomas, W. B.

    1996-01-01

    Methyl bromide is used extensively on a global basis as a pesticide against nematodes, weeds, insects, fungi, bacteria, and rodents. As a soil fumigant, it is used in significant quantities in the production of strawberry and tomato, as well as other agriculture commodities. Grain, fresh fruit, forestry products, and other materials are fumigated with methyl bromide to control pest infestations during transport and storage. Structures also are treated with this chemical to control wood-destroying insects and rodents. However, methyl bromide has been identified as a significant ozone-depleting substance, resulting in regulatory actions being taken by the U.S. Environmental Protection Agency and the United Nations Environment Program (Montreal Protocol). The science linking methyl bromide to ozone depletion is strong and was reinforced by the 1994 UNEP Montreal Protocol Science Assessment on Ozone Depletion, which states, "Methyl bromide continues to be viewed as a significant ozone-depleting compound." Identifying efficacious and viable alternatives in the near term is critical. PMID:19277178

  13. Cesium chloride protects cerebellar granule neurons from apoptosis induced by low potassium.

    PubMed

    Zhong, Jin; Yao, Weiguo; Lee, Weihua

    2007-10-01

    Neuronal apoptosis plays a critical role in the pathogenesis of neurodegenerative disorders, and neuroprotective agents targeting apoptotic signaling could have therapeutic use. Here we report that cesium chloride, an alternative medicine in treating radiological poison and cancer, has neuroprotective actions. Serum and potassium deprivation induced cerebellar granule neurons to undergo apoptosis, which correlated with the activation of caspase-3. Cesium prevented both the activation of caspase-3 and neuronal apoptosis in a dose-dependent manner. Cesium at 8 mM increased the survival of neurons from 45 +/- 3% to 91 +/- 5% of control. Cesium's neuroprotection was not mediated by PI3/Akt or MAPK signaling pathways, since it was unable to activate either Akt or MAPK by phosphorylation. In addition, specific inhibitors of PI3 kinase and MAP kinase did not block cesium's neuroprotective effects. On the other hand, cesium inactivated GSK3beta by phosphorylation of serine-9 and GSK3beta-specific inhibitor SB415286 prevented neuronal apoptosis. These data indicate that cesium's neuroprotection is likely via inactivating GSK3beta. Furthermore, cesium also prevented H(2)O(2)-induced neuronal death (increased the survival of neurons from 72 +/- 4% to 89 +/- 3% of control). Given its relative safety and good penetration of the brain blood barrier, our findings support the potential therapeutic use of cesium in neurodegenerative diseases.

  14. Room temperature deposition of crystalline indium tin oxide films by cesium-assisted magnetron sputtering

    NASA Astrophysics Data System (ADS)

    Lee, Deuk Yeon; Baik, Hong-Koo

    2008-08-01

    Indium tin oxide (ITO) films were deposited on a Si (1 0 0) substrate at room temperature by cesium-assisted magnetron sputtering. Including plasma characteristics, the structural, electrical, and optical properties of deposited films were investigated as a function of cesium partial vapor pressure controlled by cesium reservoir temperature. We calculated the cesium coverage on the target surface showing maximum formation efficiency of negative ions by means of the theoretical model. Cesium addition promotes the formation efficiency of negative ions, which plays important role in enhancing the crystallinity of ITO films. In particular, the plasma density was linearly increased with cesium concentrations. The resultant decrease in specific resistivity and increase in transmittance (82% in the visible region) at optimum cesium concentration (4.24 × 10 -4 Ω cm at 80 °C of reservoir temperature) may be due to enhanced crystallinity of ITO films. Excess cesium incorporation into ITO films resulted in amorphization of its microstructure leading to degradation of ITO crystallinity. We discuss the cesium effects based on the growth mechanism of ITO films and the plasma density.

  15. [Determination of rubidium and cesium in chloride type oilfield water by flame atomic absorption spectrometry].

    PubMed

    Ye, Xiu-Shen; Zhang, Shan-Ying; Li, Hai-Jun; Li, Wu; Wu, Zhi-Jian

    2009-03-01

    Flame atomic absorption spectrometry (FAAS) was applied to the determination of rubidium and cesium in chloride type oilfield water by considering the interferences of the coexistent K+, Na+, Ca2+, and Mg2+ ions, Standard curve method and standard addition method were compared in the determination of rubidium and cesium in the simulated oilfield water and the real oilfield water from the Nanyishan region in Qaidam Basin. Although rubidium and cesium have similar physical-chemical properties, they present different characters during their analyses using the FAAS technique. When the standard addition method was used for the determination of rubidium and cesium in the simulated oilfield water, the results of rubidium were very poor, whereas the results of cesium were satisfactory. When the standard curve method was used for the determination of rubidium and cesium in the simulated oilfield water, the results of both rubidium and cesium were satisfactory within the linear ranges of the standard curves. For the real oilfield water, standard addition method is also only applicable for the determination of cesium with a recovery ranging from 90% to 110%. While standard curve method is applicable for the determination of both rubidium and cesium with a recovery ranging from 90% to 110%.

  16. Radioactive cesium dynamics derived from hydrographic observations in the Abukuma River Estuary, Japan.

    PubMed

    Kakehi, Shigeho; Kaeriyama, Hideki; Ambe, Daisuke; Ono, Tsuneo; Ito, Shin-ichi; Shimizu, Yugo; Watanabe, Tomowo

    2016-03-01

    Large quantities of radioactive materials were released into the air and the ocean as a result of the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident, caused by the 2011 Tohoku earthquake and the subsequent major tsunami off the Pacific coast. There is much concern about radioactive contamination in both the watershed of the Abukuma River, which flows through Fukushima Prefecture, and its estuary, where it discharges into the sea in Miyagi Prefecture. We investigated radioactive cesium dynamics using mixing diagrams obtained from hydrographic observations of the Abukuma River Estuary. Particulate radioactive cesium dominates the cesium load in the river, whereas the dissolved form dominates in the sea. As the salinity increased from <0.1 to 0.1-2.3, the mixing diagram showed that dissolved radioactive cesium concentrations increased, because of desorption. Desorption from suspended particles explained 36% of dissolved radioactive cesium in estuarine water. However, the dissolved and particulate radioactive cesium concentrations in the sea decreased sharply because of dilution. It is thought that more than 80% of the discharged particulate radioactive cesium was deposited off the river mouth, where the radioactive cesium concentrations in sediment were relatively high (217-2440 Bq kg(-1)). Radioactive cesium that was discharged to the sea was transported southward by currents driven by the density distribution.

  17. Nature of the sites involved in the process of cesium desorption from vermiculite.

    PubMed

    Dzene, Liva; Tertre, Emmanuel; Hubert, Fabien; Ferrage, Eric

    2015-10-01

    Three particle size fractions of sodium-saturated vermiculite (10-20, 1-2 and 0.1-0.2 μm), differing only in their ratios of external-to-total sorption sites, were used to probe the nature of the sites involved in desorption of cesium ions. The sorption was investigated for initial aqueous concentrations of cesium ranging from 5.6×10(-4) to 1.3×10(-2) mol/L, and the cesium desorption was probed by exchange with ammonium ions. The results showed that (1) the amounts of desorbed cesium were strongly dependent on the particle size for a given initial aqueous cesium concentration and (2) the amounts of desorbed cations (Na(+) and Cs(+)) strongly decreased with increasing initial cesium aqueous concentration, irrespective of the particle size investigated. Quantitative analysis of these results suggested that cesium ions sorbed on external (edge+basal) sorption sites can be desorbed by ammonium ions. As a contrast, most of cesium ions sorbed on interlayer sites remain fixed due to the collapse of the structure under aqueous conditions. This study provides important information, such as the nature of the sites involved in the exchange process, when the thermodynamic formalism is considered to describe the ion-exchange process involving cesium and high-charge swelling clay minerals in polluted soil environments.

  18. Mobility of cesium through the Callovo-Oxfordian claystones under partially saturated conditions.

    PubMed

    Savoye, S; Beaucaire, C; Fayette, A; Herbette, M; Coelho, D

    2012-03-06

    The diffusion of cesium was studied in an unsaturated core of Callovo-Oxfordian claystone, which is a potential host rock for retrievable disposal of high-level radioactive wastes. In-diffusion laboratory experiments were performed on rock samples with water saturation degrees ranging from 81% to 100%. The analysis of both cesium concentration monitoring in the source reservoir and post-mortem cesium rock concentration profile of the samples was carried out using a chemical-transport code where the sorption of cesium was described by a multisite ion-exchange model. The results showed that cesium exhibited a clear trend related to the saturation degree of the sample. The more dehydrated the rock sample, the slower the decrease of cesium concentration, and the thinner the penetration depth of cesium was. The effective diffusion coefficient (De) for cesium decreased from 18.5 × 10(-11) m(2) s(-1) at full-saturation to 0.3 × 10(-11) m(2) s(-1) for the more dehydrated sample. This decrease is almost 1 order of magnitude higher than that for tritiated water (HTO), although a similar behavior could have been expected, since cesium is known to diffuse in the same parts of the pore space as HTO in fully saturated claystones.

  19. Effects of accompanying anions on cesium retention and translocation via droplets on soybean leaves.

    PubMed

    Yan, Dong; Zhao, Ye; Lu, Anxiang; Wang, Shuifeng; Xu, Dongyu; Zhang, Ping

    2013-12-01

    Plant foliar uptake and translocation is an important pathway for the migration of radiocesium to the human diet. This study reports the effects of accompanying anions ( [Formula: see text] , [Formula: see text] , [Formula: see text] , and I(-)) on cesium retention and translocation. An experiment to simulate cesium retention and translocation was conducted in a greenhouse by applying droplets of stable cesium solutions to the upper surface of four soybean [Glycine max (L.) Merr.] trifoliate leaves. The average percentages of cesium retention with the accompanying anions [Formula: see text] , [Formula: see text] , [Formula: see text] , and I(-) on the leaves were 7.2, 21.5, 49.3, and 10.2%, respectively. Retention values of the four treatments were stable during the 3-day exposure period, indicating that cesium could be absorbed and penetrate the cuticle quickly once it was dissolved. Scanning electron microscopy coupled with energy dispersive X-ray microanalysis showed that particles containing cesium remained on the leaf surfaces after washing. Also, nano-sized particles containing cesium were observed inside the leaf tissues. Cesium concentrations in the uncontaminated leaves, pods, stems, and roots increased during the study period indicating cesium redistribution from the contaminated leaves.

  20. Cesium Toxicity Alters MicroRNA Processing and AGO1 Expressions in Arabidopsis thaliana.

    PubMed

    Jung, Il Lae; Ryu, Moonyoung; Cho, Seok Keun; Shah, Pratik; Lee, Ju Hye; Bae, Hansol; Kim, In Gyu; Yang, Seong Wook

    2015-01-01

    MicroRNAs (miRNAs) are short RNA fragments that play important roles in controlled gene silencing, thus regulating many biological processes in plants. Recent studies have indicated that plants modulate miRNAs to sustain their survival in response to a variety of environmental stimuli, such as biotic stresses, cold, drought, nutritional starvation, and toxic heavy metals. Cesium and radio-cesium contaminations have arisen as serious problems that both impede plant growth and enter the food chain through contaminated plants. Many studies have been performed to define plant responses against cesium intoxication. However, the complete profile of miRNAs in plants during cesium intoxication has not been established. Here we show the differential expression of the miRNAs that are mostly down-regulated during cesium intoxication. Furthermore, we found that cesium toxicity disrupts both the processing of pri-miRNAs and AGONOUTE 1 (AGO1)-mediated gene silencing. AGO 1 seems to be especially destabilized by cesium toxicity, possibly through a proteolytic regulatory pathway. Our study presents a comprehensive profile of cesium-responsive miRNAs, which is distinct from that of potassium, and suggests two possible mechanisms underlying the cesium toxicity on miRNA metabolism.

  1. Cesium isotope ratios as indicators of nuclear power plant operations.

    PubMed

    Delmore, James E; Snyder, Darin C; Tranter, Troy; Mann, Nick R

    2011-11-01

    There are multiple paths by which radioactive cesium can reach the effluent from reactor operations. The radioactive (135)Cs/(137)Cs ratios are controlled by these paths. In an effort to better understand the origin of this radiation, these (135)Cs/(137)Cs ratios in effluents from three power reactor sites have been measured in offsite samples. These ratios are different from global fallout by up to six fold and as such cannot have a significant component from this source. A cesium ratio for a sample collected outside of the plant boundary provides integration over the operating life of the reactor. A sample collected inside the plant at any given time can be much different from this lifetime ratio. The measured cesium ratios vary significantly for the three reactors and indicate that the multiple paths have widely varying levels of contributions. There are too many ways these isotopes can fractionate to be useful for quantitative evaluations of operating parameters in an offsite sample, although it may be possible to obtain limited qualitative information for an onsite sample.

  2. SODIUM ALUMINOSILICATE SOLIDS AFFINITY FOR CESIUM AND ACTINIDES

    SciTech Connect

    Peters, T; Bill Wilmarth, B; Samuel Fink, S

    2007-07-31

    Washed sodium-aluminosilicate (NAS) solids at initial concentrations of 3.55 and 5.4 g/L sorb or uptake virtually no cesium over 288 hours, nor do any NAS solids generated during that time. These concentrations of solids are believed to conservatively bound current and near-term operations. Hence, the NAS solids should not have affected measurements of the cesium during the mass transfer tests and there is minimal risk of accumulating cesium during routine operations (and hence posing a gamma radiation exposure risk in maintenance). With respect to actinide uptake, it appears that NAS solids sorb minimal quantities of uranium - up to 58 mg U per kg NAS solid. The behavior with plutonium is less well understood. Additional study may be needed for radioactive operations relative to plutonium or other fissile component sorption or trapping by the solids. We recommend this testing be incorporated in the planned tests using samples from Tank 25F and Tank 49H to extend the duration to bound expected inventory time for solution.

  3. MODELING RESULTS FROM CESIUM ION EXCHANGE PROCESSING WITH SPHERICAL RESINS

    SciTech Connect

    Nash, C.; Hang, T.; Aleman, S.

    2011-01-03

    Ion exchange modeling was conducted at the Savannah River National Laboratory to compare the performance of two organic resins in support of Small Column Ion Exchange (SCIX). In-tank ion exchange (IX) columns are being considered for cesium removal at Hanford and the Savannah River Site (SRS). The spherical forms of resorcinol formaldehyde ion exchange resin (sRF) as well as a hypothetical spherical SuperLig{reg_sign} 644 (SL644) are evaluated for decontamination of dissolved saltcake wastes (supernates). Both SuperLig{reg_sign} and resorcinol formaldehyde resin beds can exhibit hydraulic problems in their granular (nonspherical) forms. SRS waste is generally lower in potassium and organic components than Hanford waste. Using VERSE-LC Version 7.8 along with the cesium Freundlich/Langmuir isotherms to simulate the waste decontamination in ion exchange columns, spherical SL644 was found to reduce column cycling by 50% for high-potassium supernates, but sRF performed equally well for the lowest-potassium feeds. Reduced cycling results in reduction of nitric acid (resin elution) and sodium addition (resin regeneration), therefore, significantly reducing life-cycle operational costs. These findings motivate the development of a spherical form of SL644. This work demonstrates the versatility of the ion exchange modeling to study the effects of resin characteristics on processing cycles, rates, and cold chemical consumption. The value of a resin with increased selectivity for cesium over potassium can be assessed for further development.

  4. 2D Plasma Photonic Crystals in resonantly pumped Cesium Vapor

    NASA Astrophysics Data System (ADS)

    Righetti, Fabio; Cappelli, Mark

    2016-10-01

    Plasma photonic crystals (PCs) afford the opportunity for dynamic reconfigurability. In this presentation we describe the conditions required for constructing an all-plasma PC that can interact with sub mm-wavelength radiation. Conditions required for this interaction are high plasma densities (>1014 cm-3) and small lattice constant (<1 mm). We describe the construction of a two-dimensional photonic crystal composed of several sub-millimeter plasma filaments in a 1 Torr heated cesium vapor cell. The cesium is ionized by 1 W continuous-wave laser excitation with the wavelength centered around the 852 nm resonance line. The filaments are produced by focusing the laser through a microlens array with a 500 µm pitch. Small departures from line center are found to produce a strong variation in the plasma filament structure and density. Stark broadening measurements of the cesium 9F-5D transition at 647.4 nm yield plasma density. We present preliminary terahertz transmission spectrum of the two-dimensional plasma photonic crystal structure. Experimental results are compared to numerical simulations which predict the presence of bandgaps in regions of both negative and positive plasma dielectric constant.

  5. Cesium Isotope Ratios as Indicators of Nuclear Power Plant Operations

    SciTech Connect

    Darin Snyder; James Delmore; Troy Tranter; Nick Mann; Michael Abbott; John Olson

    2011-11-01

    There are multiple paths by which radioactive cesium can reach the effluent from reactor operations. The radioactive 135Cs/137Cs ratios are controlled by these paths. In an effort to better understand the origin of this radiation, these 135Cs/137Cs ratios in effluents from three power reactor sites have been measured in offsite samples. These ratios are different from global fallout by up to six fold and as such cannot have a significant component from this source. A cesium ratio for a sample collected outside of the plant boundary provides integration over the operating life of the reactor. A sample collected inside the plant at any given time can be much different from this lifetime ratio. The measured cesium ratios vary significantly for the three reactors and indicate that the multiple paths have widely varying levels of contributions. There are too many ways these isotopes can fractionate to be useful for quantitative evaluations of operating parameters in an offsite sample, although it may be possible to obtain limited qualitative information for an onsite sample.

  6. Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

    SciTech Connect

    Wang, Wei-Wei; Yao, Jia-Liang

    2010-11-15

    Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

  7. [Tiotropium bromide for treating chronic obstructive pulmonary disease].

    PubMed

    Uteshev, D B; Buniatian, N D; Kovaleva, V L

    2010-11-01

    Five different types of muscarine-sensitive receptors were identified until now. In routine practice, the nonselective antagonist of cholinoreceptors are replaced by ipratropium bromide that is selectively blocking M1, M2, and M3 subtypes with the same affinity to each of them. However, the blockage of M2 subtype leads to bronchoconstriction and is accompanied by inhibition of M3 receptors in bronchial smooth muscles. The new drug tiotropium bromide selectively inhibits only the M1 and M3 types of receptors and does not affect the M2 subtype. This drug is administered only once a day, which is very important in clinical practice. Thus tiotropium bromide is the drug of choice for basic therapy of COPD.

  8. Sodium cromoglycate and ipratropium bromide in exercise-induced asthma.

    PubMed Central

    Thomson, N C; Patel, K R; Kerr, J W

    1978-01-01

    In thirteen patients with extrinsic asthma the effects of placebo, sodium cromoglycate, ipratropium bromide, and ipratropium bromide plus sodium cromoglycate were studied in a random double-blind fashion to assess their inhibitory action in exercise-induced asthma (EIA). Exercise testing consisted of steady state running on an inclined treadmill for up to eight minutes. In eight of the 13 patients studied the baseline ratio of expiratory flow at 50% vital capacity (VC) breathing helium-oxygen (V50He) to V50air was over 1.20 and they were called responders; the remaining five patients were called non-responders. There was a significantly lower baseline maximum mid-expiratory flow rate (MMEF) in non-responders (P less than 0.02) as compared to responders but no difference in forced expiratory volume in one second (FEV1) or forced vital capacity (FVC). Sodium cromoglycate (P less than 0.02), ipratropium bromide (P less than 0.01), and ipratropium bromide plus spdium cromoglycate (P less than 0.01) all significantly inhibited the percentage fall in FEV1 after exercise in the responders. Ipratropium bromide had no preventive action on non-responders, unlike sodium cromoglycate (P less than 0.05) and ipratropium bromide plus sodium cromoglycate (P less than 0.02). It is postulated that mediator release is an important factor in development of EIA in most extrinsic asthmatics, whereas cholinergic mechanisms are relevant only in those patients in whom the main site of airflow obstruction is in the large central airways. PMID:154747

  9. Photochemistry of alkyl bromides trapped in water ice films

    NASA Astrophysics Data System (ADS)

    Schrems, O.; Okaikwei, B.; Bluszcz, Th.

    2012-04-01

    Photochemical reactions of atmospheric trace gases taking place at the surface of atmospheric ice particles and in bulk ice are important in stratospheric and tropospheric chemistry but also in polar and alpine snowpack chemistry. Consequently, the understanding of the uptake und incorporation of atmospheric trace gases in water ice as well as their interactions with water molecules is very important for the understanding of processes which occur in ice particles and at the air/ice interface. Reactive atmospheric trace gases trapped in ice are subject of photochemical reactions when irradiated with solar UV radiation. Among such compounds bromine species are highly interesting due to their potential of depleting ozone both in the stratosphere and troposphere. Organic bromine gases can carry bromine to the stratosphere. Methyl bromide (CH3Br) is the largest bromine carrier to the stratosphere. It has both natural and anthropogenic sources. In this contribution we will present the results of our laboratory studies of alkyl bromides (methyl, bromide (CH3Br), dimethyl bromide (CH2Br2), n-propyl bromide (C3H7Br), 1,2-dibromoethane C2H4Br2)), trapped in water ice. We have simulated the UV photochemistry of these brominated alkanes isolated in ice films kept at 16 K and for comparison in solid argon matrices. The photoproducts formed in the ice have been identified by means of FTIR spectroscopy. Reflection absorption infrared spectroscopy (RAIRS) is especially useful to study nascent ice surfaces, kinetics of adsorption/decomposition, and heterogeneous catalysis. Among the observed photoproducts we could identify carbon monoxide and carbon dioxide for each alkyl bromide studied. The photoproduct HBr is dissociated in the bulk ice. Based on the experimental observations possible reaction mechanisms will be discussed.

  10. Cesium reservoir and interconnective components. Final test report: TFE Verification Program

    SciTech Connect

    Not Available

    1994-03-01

    The program objective is to demonstrate the technology readiness of a TFE (thermionic fuel element) suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW range. A thermionic converter must be supplied with cesium vapor for two reasons. Cesium atoms adsorbed on the surface of the emitter cause a reduction of the emitter work function to permit high current densities without excessive heating of the emitter. The second purpose of the cesium vapor is to provide space-charge neutralization in the emitter-collector gap so that the high current densities may flow across the gap unattenuated. The function of the cesium reservoir is to provide a source of cesium atoms, and to provide a reserve in the event that cesium is lost from the plasma by any mechanism. This can be done with a liquid cesium metal reservoir in which case it is heated to the desired temperature with auxiliary heaters. In a TFE, however, it is desirable to have the reservoir passively heated by the nuclear fuel. In this case, the reservoir must operate at a temperature intermediate between the emitter and the collector, ruling out the use of liquid reservoirs. Integral reservoirs contained within the TFE will produce cesium vapor pressures in the desired range at typical electrode temperatures. The reservoir material that appears to be the best able to meet requirements is graphite. Cesium intercalates easily into graphite, and the cesium pressure is insensitive to loading for a given intercalation stage. The goals of the cesium reservoir test program were to verify the performance of Cs-graphite reservoirs in the temperature-pressure range of interest to TFE operation, and to test the operation of these reservoirs after exposure to a fast neutron fluence corresponding to seven year mission lifetime. In addition, other materials were evaluated for possible use in the integral reservoir.

  11. Ionizing mechanisms in a cesium plasma irradiated with a ruby laser

    NASA Technical Reports Server (NTRS)

    Shimada, K.; Robinson, L. B.

    1975-01-01

    A cesium filled diode--laser plasmadynamic converter was built to investigate the feasibility of converting laser energy to electrical energy at large power levels. Experiments were performed with a pulsed ruby laser to determine the quantity of electrons and cesium ions generated per pulse of laser beam and to determine the output voltage. A current density as high as 200 amp/sq cm from a spot of approximately 1 sq mm area and an open circuit voltage as high as 1.5 volts were recorded. A qualitative theory was developed to explain these results. In the operation of the device, the laser beam evaporates some of the cesium and ionizes the cesium gas. A dense cesium plasma is formed to absorb further the laser energy. Results suggest that the simultaneous absorption of two ruby laser photons by the cesium atoms plays an important role in the initial ionization of cesium. Inverse bremsstrahlung absorption appears to be the dominant mechanism in subsequent processes. Recombinations of electrons and cesium ions appear to compete favorably with the simultaneous absorption of two photons.

  12. Phase separation of cesium from lead borosilicate glass by heat treatment under a reducing atmosphere.

    PubMed

    Xu, Zhanglian; Okada, Takashi; Nishimura, Fumihiro; Yonezawa, Susumu

    2016-11-05

    A phase-separation technique for removing sodium from glass using a heat-treatment method under a reducing atmosphere was previously developed for sodium recovery from waste glass. In this study, this technique was applied to cesium-containing lead borosilicate glass to concentrate the cesium in phase-separated sodium-rich materials for efficient cesium extraction. The theoretical phase-separation temperature of the sodium-rich phase was simulated by thermodynamic equilibrium calculations and was predicted to occur below 700°C for lead borosilicate glass. Experimentally, a simulated lead borosilicate glass was melted at 1000°C and subsequently annealed below 700°C under a CO-containing reducing atmosphere. The phase separation of cesium was found to occur with sodium enrichment on the glass surface that was in contact with the gas phase, promoting cesium extraction from the treated glass using water. The cesium extraction efficiency was affected by the surface area of the treated glass that was in contact with water, and under the examined conditions, the cesium extraction efficiency was up to 66%. Phase separation using reductive heat treatment, combined with a water leaching technique, is suggested to be effective for extracting cesium incorporated in borosilicate glass waste.

  13. Recovery of cesium and palladium from nuclear reactor fuel processing waste

    DOEpatents

    Campbell, David O.

    1976-01-01

    A method of recovering cesium and palladium values from nuclear reactor fission product waste solution involves contacting the solution with a source of chloride ions and oxidizing palladium ions present in the solution to precipitate cesium and palladium as Cs.sub.2 PdCl.sub.6.

  14. Chemical alternatives to methyl bromide for Florida ornamental production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This project is a cooperative effort among USDA, ARS and University of Florida researchers, Florida in-ground ornamental producers, and fumigant industry representatives. Funding is provided through the USDA-ARS Area-wide Pest Management Program for Alternatives to Methyl Bromide. The ornamental i...

  15. Status of Alternatives for Methyl Bromide in the United States

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is a fumigant used for disinfestation of soils, commodities and structures. Listed as an ozone-depleting chemical international environmental protocols and the U.S. Clean Air Act require that its use be severely restricted. Although use of this fumigant has fallen considerably, the U....

  16. EFFECT OF BROMIDE ION ON FORMATION OF HAAS DURING CHLORINATION

    EPA Science Inventory

    loacetic acids (HAAs) during chlorination and he effects of independent variables, including pH, reaction time, and chlorine dosage. Almost all of the indpendent loaetic acids (HAAs) during chlorin...designed to statistically evaluate the influence of bromide ion on the formatio...

  17. Depleting methyl bromide residues in soil by reaction with bases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Despite generally being considered the most effective soil fumigant, methyl bromide (MeBr) use is being phased out because its emissions from soil can lead to stratospheric ozone depletion. However, a large amount is still currently used due to Critical Use Exemptions. As strategies for reducing the...

  18. REVIEW OF CONTROL OPTIONS FOR METHYL BROMIDE IN COMMODITY TREATMENT

    EPA Science Inventory

    The report describes recent developments in the control of methyl bromide (MeBr) and discusses technical considerations and requirements for and economic feasibility of recovery. (NOTE: MeBr, fumigant for agricultural commodities, is an ozone depleting chemical. The U.S. EPA has ...

  19. Evaluation of the Efficacy of Methyl Bromide in the ...

    EPA Pesticide Factsheets

    Journal Article The objective of this article is to determine the required conditions for the effective inactivation of Bacillus anthracis (B.a.) spores on materials using methyl bromide (MeBr) and to obtain comparative efficacy data with three avirulent microorganisms, to assess their potential as surrogates for B.a. Ames.

  20. The Fate of Alternative Soil Funigants to Methyl Bromide

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soil fumigation is an important agricultural practice for the control of soil-borne pests. Since the phase–out of methyl bromide, due to its role in the depletion of stratospheric ozone, several alternatives such as 1,3-dichloropropene (1,3-D), chloropicrin (CP), and dimethyl disulfide (DMDS) are b...

  1. Ipratropium bromide spray as treatment for sialorrhea in Parkinson's disease.

    PubMed

    Thomsen, Teri R; Galpern, Wendy R; Asante, Abena; Arenovich, Tamara; Fox, Susan H

    2007-11-15

    Sialorrhea is a significant problem in advanced Parkinson's disease (PD). Current treatment options include systemic anticholinergics which frequently cause side effects. We hypothesized that sublingual application of ipratropium bromide spray, an anticholinergic agent that does not cross the blood brain barrier, may reduce drooling without systemic side effects. We performed a randomized, double blind, placebo-controlled, crossover study in 17 subjects with PD and bothersome drooling. Patients were randomized to receive ipratropium bromide or placebo (one to two sprays, maximum of four times per day) for 2 weeks followed by a 1 week washout and crossover for further 2 weeks of treatment. The primary outcome was an objective measure of weight of saliva production. Secondary outcomes were subjective rating of severity and frequency of sialorrhoea using home diaries, United Parkinson's Disease Rating Scale (UPDRS) part II salivation subscore, parkinsonian disability using UPDRS, and adverse events. Ipratropium bromide spray had no significant effect on weight of saliva produced. There was a mild effect of treatment on subjective measures of sialorrhea. There were no significant adverse events. Ipratropium bromide spray was well tolerated in subjects with PD. Although it did not affect objective measures of saliva production, further studies in parkinsonism may be warranted.

  2. Actual hazard of methyl bromide fumigation in soil disinfection.

    PubMed Central

    Van Den Oever, R U; Roosels, D; Lahaye, D

    1982-01-01

    Methyl bromide, a highly toxic and ready penetrating fumigant, is widely used against rodents, insects, mites, and a range of pathogenic organisms in soil, compost, and timber. To disinfect soil in greenhouses, methyl bromide is brought under pressure from outside by a vaporiser and blown on to ground under a polyethylene cover. The gas being three times heavier than air easily penetrates the ground. Depending on the local ventilation, a considerable amount of gas evaporates into the surrounding atmosphere, this emission being especially serious during the fumigation procedure and at the removal of the plastic cover. Previously, mechanical injection of methyl bromide on to the ground within closed areas was prohibited, since this technique exposed at least four disinfection workers at a time, who were provided with only a canister respirator, to gas concentrations of over 1000 ppm CH3Br. The present study established that fumigation with methyl bromide also carries risks for the well-protected worker inside, as well as for the one controlling the vaporiser. The concentration during application varies from 30 to 3000 ppm. Concentration in the air declines with time to 4 ppm CH3Br five days after application. Discarding the plastic sheet involves exposure to peak values as high as 200 ppm for a few seconds. On the ninth day after application, milling the soil can expose workers to up to 15 ppm; on the eleventh day no CH3Br concentration in the air could be found. PMID:7066229

  3. Bromide ion effect on N-nitrosodimethylamine formation by monochloramine.

    PubMed

    Luh, Jeanne; Mariñas, Benito J

    2012-05-01

    N-Nitrosodimethylamine (NDMA) formation experiments conducted in phosphate buffer demonstrated that in waters containing monochloramine, the presence of bromide ion enhanced NDMA formation at the relatively high pH values of 8 and 9 after 24 h of reaction time, which was consistent with literature results. However, at relatively low to neutral pH (6 to 7), the presence of bromide resulted in lower NDMA formation as compared to results obtained in the absence of bromide. The hypothesis that bromamines were the species directly responsible for enhanced NDMA formation at high pH was tested and was shown not to be valid. Additional active bromine species were also tested, including hypobromous acid, hypobromite ion, and tribromide ion, with no species showing an ability to directly enhance NDMA formation. Analysis of the UV spectral data corresponding to the NDMA experiments suggest that the mechanism by which bromide enhances NDMA formation lies in the formation of a haloamine compound, possibly the mixed dihaloamine bromochloramine.

  4. Reactive films for mitigating methyl bromide emissions from fumigated soil

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Emissions of methyl bromide (MeBr) from agricultural fumigation can lead to depletion of the stratospheric ozone layer, and so its use is being phased out. However, as MeBr is still widely used under Critical Use Exemptions, strategies are still required to control such emissions. In this work, nove...

  5. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  6. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  7. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  8. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  9. On the existence of ‘L-alanine cadmium bromide'

    NASA Astrophysics Data System (ADS)

    Srinivasan, Bikshandarkoil R.

    2013-12-01

    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  10. On the existence of 'L-alanine cadmium bromide'.

    PubMed

    Srinivasan, Bikshandarkoil R

    2013-12-01

    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  11. 75 FR 5582 - Methyl Bromide; Amendments to Terminate Uses

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-03

    ... or on alfalfa hay and cottonseed for these product registrations. These are the last products containing the pesticide methyl bromide registered for use on alfalfa hay and cotton seed in the United... post-harvest alfalfa hay and post-harvest cottonseed uses is prohibited after October 31, 2009,...

  12. Methyl bromide phase out could affect future reforestation efforts

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide has long been an integral component in producing healthy tree seedlings in forest nurseries of California, Idaho, Montana, Oregon and Washington. The fumigant was supposed to be completely phased out of use in the United States of America by 2005, but many forest nurseries continue to...

  13. [Variation in amount of radioactive cesium before and after cooking dry shiitake and beef].

    PubMed

    Nabeshi, Hiromi; Tsutsumi, Tomoaki; Hachisuka, Akiko; Matsuda, Rieko

    2013-01-01

    We investigated the change of radioactive cesium content in food due to cooking in order to estimate the internal radiation exposure due to from radioactive materials in food. Our results revealed that soaking dry shiitake in water decreased the radioactive cesium content by about 50%, compared with that present in uncooked shiitake. Radioactive cesium in beef was decreased by about 10%, 12%, 60-65% and 80% by grilling, frying, boiling and stewing, respectively, compared to uncooked beef. For cooked beef, the decrease in the ratio of radioactive cesium was significantly different among the types of cooking. The decrease ratio of radioactive cesium in boiled and stewed beef was 8 times higher than that in grilled and fried beef.

  14. [Reduction of radioactive cesium content in beef by soaking in seasoning].

    PubMed

    Nabeshi, Hiromi; Tsutsumi, Tomoaki; Hachisuka, Akiko; Matsuda, Rieko

    2013-01-01

    It is important to obtain information about ways of removing radioactive cesium from foods in order to reduce internal radiation exposure from food and to ensure the safety and security of food. In this study, we investigated the change of radioactive cesium content in beef due to soaking in seasoning. Our results revealed that soaking beef in liquid seasoning (salt concentration: 8-10%) for 24 h or in miso seasoning (salt concentration: about 9%) for 7 days decreased the radioactive cesium content by about 20% and 55%, respectively, compared with that present in beef before soaking. Furthermore, soaking beef in 10% salt solution for 7 days while changing the salt solution every day or every three days decreased the radioactive cesium content by about 75%, compared with that present in beef before soaking. Because the seasoning is usually discarded after soaking, the procedure of soaking beef in seasoning is a useful method of reducing the burden of radioactive cesium.

  15. DRAMATIC IMPROVEMENTS IN CAUSTIC-SIDE SOLVENT EXTRACTION OF CESIUM THROUGH MORE EFFICIENT STRIPPING

    SciTech Connect

    Delmau, Laetitia Helene; Bazelaire, Eve; Bonnesen, Peter V; Engle, Nancy L; Gorbunova, Maryna; Haverlock, Tamara; Moyer, Bruce A; Ensor, Dale; Meadors, Viola M; Harmon, Ben; Bartsch, Richard A.; Surowiec, Malgorzata A.; Zhou, Hui

    2008-01-01

    Dramatic potential improvements to the chemistry of the Caustic-Side Solvent Extraction (CSSX) process are presented as related to enhancement of cesium stripping. The current process for removing cesium from the alkaline high-level waste (HLW) at the USDOE Savannah River Site employs acidic scrub and strip stages and shows remarkable extraction and selectivity properties for cesium. It was determined that cesium stripping can be greatly improved with caustic or near-neutral stages using sodium hydroxide and boric acid as scrub and strip solutions, respectively. Improvements can also be achieved by appending pH-sensitive functional groups to the calix[4]arene-crown-6 extractant. Addition of a proton-ionizable group to the calixarene frame leads to a dramatic "pH swing" of up to 6 orders of magnitude change in cesium distribution ratio.

  16. Magic Frequencies for Cesium Primary-Frequency Standard

    NASA Astrophysics Data System (ADS)

    Flambaum, V. V.; Dzuba, V. A.; Derevianko, A.

    2008-11-01

    We consider microwave hyperfine transitions in the ground state of cesium and rubidium atoms which are presently used as the primary and the secondary frequency standards. The atoms are confined in an optical lattice generated by a circularly polarized laser field. We demonstrate that applying an external magnetic field with appropriately chosen direction may cancel dynamic Stark frequency shift making the frequency of the clock transition insensitive to the strengths of both the laser and the magnetic fields. This can be attained for practically any laser frequency which is sufficiently distant from a resonance.

  17. Magic Frequencies for Cesium Primary-Frequency Standard

    SciTech Connect

    Flambaum, V. V.; Dzuba, V. A.; Derevianko, A.

    2008-11-28

    We consider microwave hyperfine transitions in the ground state of cesium and rubidium atoms which are presently used as the primary and the secondary frequency standards. The atoms are confined in an optical lattice generated by a circularly polarized laser field. We demonstrate that applying an external magnetic field with appropriately chosen direction may cancel dynamic Stark frequency shift making the frequency of the clock transition insensitive to the strengths of both the laser and the magnetic fields. This can be attained for practically any laser frequency which is sufficiently distant from a resonance.

  18. Cesium Incorporation and Diffusion in Cancrinite, Soalite, Zeolite, and Allophane

    SciTech Connect

    Mon, Jarai; Deng, Youjun; Flury, Markus; Harsh, James B.

    2005-11-28

    At the US Department of Energy?s Hanford site, high level nuclear waste has leaked from under4 ground storage tanks. The waste consists of hyperalkaline solutions, which upon contact with the 5 sediments, caused dissolution of silicate minerals and precipitation of secondary aluminosilicate minerals. Cancrinite, sodalite, LTA zeolite, and allophane have been identified as the new mineral phases 7 in laboratory simulations. Cesium, the major radionuclide in the waste solutions, may be incorporated 8 into the structural framework of the precipitates. The objectives of this study were to determine the 9 resistance of incorporated Cs to ion exchange and the mobility and diffusion coefficient of Cs in the 10 minerals. The minerals were synthesized in solutions mimicking the tank waste and were washed with 11 deionized water. Two sets of experiments were conducted to test the resistance of Cs to ion exchange. 12 In the first set, Cs was exchanged three times at 80 C by 0.5 N Na, K, or Ca. The Cs remaining in 13 minerals was quantified after acid digestion. In the second set, we studied the Cs desorption kinetics 14 by using 0.1 M Na as ion exchanger. Cesium concentration in the solution phase was measured as a 15 function of time for 23 days. Cesium incorporated in sodalite and cancrinite was far more difficult to 16 replace than that in LTA zeolite and allophane. Most of the incorporated Cs (94?99%) in LTA zeolite 17 and allophane was readily exchangeable with Na or K; less than 20% of Cs in sodalite and <55% of 2 Cs in cancrinite could be exchanged. The fraction of desorbed Cs was also affected by the exchanging 19 ions; the ion with lowest dehydration energy (K) was the most effective in replacing Cs. The results 20 of the desorption kinetics experiments showed that Cs desorbed quickly from LTA zeolite and the Cs 21 diffusion coefficient was close to that in solution; i.e., about 10?9 m2/s. Solid-state NMR analysis 22 supported the high mobility of Cs in LTA zeolite

  19. Field operations with cesium clocks in HF navigation systems

    NASA Technical Reports Server (NTRS)

    Christy, E. H.; Clayton, D. A.

    1982-01-01

    Networks of HF phase comparison marine navigation stations employing cesium clocks are discussed. The largest permanent network is in the Gulf of Mexico where some fourteen base stations are continuously active and others are activated as needed. These HF phase comparison systems, which operate on a single transmission path, require a clock on the mobile unit as well. Inventory consists of upwards of 70 clocks from two different manufacturers. The maintenance of this network as an operating system requires a coordinated effort involving clock preparation, clock environment control, station performance monitoring and field service.

  20. Safety evaluation for packaging (onsite) singly encapsulated cesium chloride capsules

    SciTech Connect

    Smyth, W.W.

    1997-05-22

    Three nonstandard Waste Encapsulation and Storage Facility (WESF) cesium chloride capsules are being shipped from WESF (225B building) to the 324 building. They would normally be shipped in the Beneficial Uses Shipping System (BUSS) cask under its US Department of Energy (DOE) license (DOE 1996), but these capsules are nonstandard: one has a damaged or defective weld in the outer layer of encapsulation, and two have the outer encapsulation removed. The 3 capsules, along with 13 other capsules, will be overpacked in the 324 building to meet the requirements for storage in WESF`s pool.

  1. Optical transmission measurements on monocrystalline and polycrystalline cesium iodide

    NASA Technical Reports Server (NTRS)

    Viehmann, W.; Arens, J. F.; Simon, M.

    1973-01-01

    A summary is presented of optical measurements performed on a variety of cesium iodide samples to characterize quantitatively the optical quality of the materials, and to define and measure parameters which determine its suitability as a detector material for high energy cosmic ray experiments on HEAO-A. The general case of light transmission through a long rectangular slab under multiple internal reflections is discussed along with transmission and scattering as a function of wavelength at normal incidence. Scattering parameters are tabulated for encapsulated single crystal CsI and polyscin.

  2. Low energy sputtering of cobalt by cesium ions

    NASA Technical Reports Server (NTRS)

    Handoo, A.; Ray, Pradosh K.

    1989-01-01

    An experimental facility to investigate low energy (less than 500 eV) sputtering of metal surfaces with ions produced by an ion gun is described. Results are reported on the sputtering yield of cobalt by cesium ions in the 100 to 500 eV energy range at a pressure of 1 times 10(exp -6) Torr. The target was electroplated on a copper substrate. The sputtered atoms were collected on a cobalt foil surrounding the target. Co-57 was used as a tracer to determine the sputtering yield.

  3. Performance of the PARCS Testbed Cesium Fountain Frequency Standard

    NASA Technical Reports Server (NTRS)

    Enzer, Daphna G.; Klipstein, William M.

    2004-01-01

    A cesium fountain frequency standard has been developed as a ground testbed for the PARCS (Primary Atomic Reference Clock in Space) experiment, an experiment intended to fly on the International Space Station. We report on the performance of the fountain and describe some of the implementations motivated in large part by flight considerations, but of relevance for ground fountains. In particular, we report on a new technique for delivering cooling and trapping laser beams to the atom collection region, in which a given beam is recirculated three times effectively providing much more optical power than traditional configurations. Allan deviations down to 10 have been achieved with this method.

  4. Interaction of the cesium cation with mono-, di-, and tricarboxylic acids in the gas phase. A Cs+ affinity scale for cesium carboxylates ion pairs.

    PubMed

    Mayeux, Charly; Tammiku-Taul, Jaana; Massi, Lionel; Lohu, Ene-Liis; Burk, Peeter; Maria, Pierre-Charles; Gal, Jean-François

    2009-10-01

    Humic substances (HS), including humic and fulvic acids, play a significant role in the fate of metals in soils. The interaction of metal cations with HS occurs predominantly through the ionized (anionic) acidic functions. In the context of the effect of HS on transport of radioactive cesium isotopes in soils, a study of the interaction between the cesium cation and model carboxylic acids was undertaken. Structure and energetics of the adducts formed between Cs+ and cesium carboxylate salts [Cs+RCOO-] were studied by the kinetic method and density functional theory (DFT). Clusters generated by electrospray ionization mass spectrometry from mixtures of a cesium salt (nitrate, iodide, trifluoroacetate) and carboxylic acids were quantitatively studied by CID. By combining the results of the kinetic method and the energetic data from DFT calculations, a scale of cesium cation affinity, CsCA, was built for 33 cesium carboxylates representing the first scale of cation affinity of molecular salts. The structural effects on the CsCA values are discussed.

  5. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  6. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  7. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  8. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  9. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of..., postharvest 5.0 Radish, postharvest 30.0 Rice, grain, postharvest 50.0 Rutabaga, roots, postharvest 30.0..., roots, postharvest 30.0 Walnut, postharvest 200.0 Watermelon, postharvest 20.0 Wheat 50.0 (2)...

  10. Heat capacities of the water + lithium bromide + ethanolamine and water + lithium bromide + 1,3-propanediol systems

    SciTech Connect

    Kim, J.S.; Park, Y.; Lee, H.; Yu, S.I.

    1997-03-01

    Heat capacities of the water + lithium bromide + ethanolamine (LiBr/H{sub 2}N(CH{sub 2}){sub 2}OH mass ratio = 3.5) and water + lithium bromide + 1,3-propanediol (LiBr/HO(CH{sub 2}){sub 3}OH mass ratio = 3.5) systems were measured by using an isoperibol solution calorimeter at four temperatures (283.15, 298.15, 313.15, and 333.15 K) and absorbent (LiBr + H{sub 2}N(CH{sub 2}){sub 2}OH and LiBr + HO(CH{sub 2}){sub 3}OH) concentration ranges of (29.2 to 70.7)% and (30.7 to 68.3)%, respectively. The measured values were fitted with a simple equation by a least-squares method and the average absolute deviations between experimental and calculated values were 0.21% for the water + lithium bromide + ethanolamine system and 0.15% for the water + lithium bromide + 1,3-propanediol system, respectively.

  11. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  12. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  13. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  14. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  15. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  16. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  17. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  18. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  19. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  20. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  1. Uptake of ozone to mixed sodium bromide/ citric acid solutions

    NASA Astrophysics Data System (ADS)

    Lee, Ming-Tao; Steimle, Emilie; Bartels-Rausch, Thorsten; Kato, Shunsuke; Lampimäki, Markus; Brown, Matthew; van Bokhoven, Jeroen; Nolting, Frithjof; Kleibert, Armin; Türler, Andreas; Ammann, Markus

    2013-04-01

    Sea-salt solution - air interfaces play an important role in the chemistry of the marine boundary layer. The reaction of ozone (O3) with bromide is of interest in the context of formation of photolabile halogens (Br2, BrCl) in the marine boundary layer. Recent experiments have suggested that the bromide oxidation rate is related to the surface concentration of bromide [1] and inversely related to the gas phase concentration of O3, an indication for a precursor mediated reaction at the surface [2]. So far, the effect of organics (such as those occurring at the ocean surface or in marine aerosols) on the reaction of O3 with bromide aerosols has not been studied yet. In our study we investigate the uptake kinetics of O3 to a mixed solution of sodium bromide (NaBr) and citric acid (CA), which represents highly oxidized organic compounds present in the environment, with a well-established coated wall flow tube technique, which leads to exposure of the film to O3 allowing the heterogeneous reactions to take place and the loss of O3 being measured. The results indicate that the uptake of O3 to the films with the higher bromide concentrations (0.34M and 4M) is independent of the gas phase concentration and roughly consistent with uptake limited by reaction in the bulk. For the lower bromide concentration (84mM), however, we observe a trend of the uptake coefficient to decrease with increasing O3 concentration, indicating an increasing importance of a surface reaction. In an attempt to constrain the kinetic data, we employed X-ray photoelectron spectroscopy (XPS) to get insight into the surface composition of the aqueous solution - air interface. Previous XPS studies have shown that halide ion concentrations are enhanced at the aqueous solution air interface [3-4], which likely promotes the surface reactions of bromide or iodide with O3. A first XPS study of ternary solutions of KI with butanol indicated the importance of specific interactions of the cation with the alcohol

  2. RESORCINOL-FORMALDEHYDE ADSORPTION OF CESIUM (Cs+) FROM HANFORD WASTE SOLUTIONS-PART I: BATCH EQUILIBRIUM STUDY

    SciTech Connect

    HASSAN, NEGUIBM

    2004-03-30

    Batch equilibrium measurements were conducted with a granular Resorcinol-Formaldehyde (RF) resin to determine the distribution coefficients (Kds) for cesium. In the tests, Hanford Site actual waste sample containing radioactive cesium and a pretreated waste sample that was spiked with non-radioactive cesium were used. Initial concentrations of non-radioactive cesium in the waste sample were varied to generate an equilibrium isotherm for cesium. Two additional tests were conducted using a liquid to solid phase ratio of 10 and a contact time of 120 hours. The measured distribution coefficient (Kd) for radioactive cesium (137Cs) was 948 mL/g; the Kd for non-radioactive cesium (133Cs) was 1039 mL/g. The Kd for non-radioactive cesium decreased from 1039 to 691 mL/g as the initial cesium concentration increased. Very little change of the Kd was observed at initial cesium concentrations above 64 mg/mL. The maximum sorption capacity for cesium on granular RF resin was 1.17 mmole/g dry resin. T his value was calculated from the fit of the equilibrium isotherm data to the Dubinin-Radushkevich equation. Previously, a total capacity of 2.84 mmole/g was calculated by Bibler and Wallace for air-dried RF resin.

  3. Lasing in robust cesium lead halide perovskite nanowires

    PubMed Central

    Eaton, Samuel W.; Lai, Minliang; Gibson, Natalie A.; Wong, Andrew B.; Dou, Letian; Ma, Jie; Wang, Lin-Wang; Leone, Stephen R.; Yang, Peidong

    2016-01-01

    The rapidly growing field of nanoscale lasers can be advanced through the discovery of new, tunable light sources. The emission wavelength tunability demonstrated in perovskite materials is an attractive property for nanoscale lasers. Whereas organic–inorganic lead halide perovskite materials are known for their instability, cesium lead halides offer a robust alternative without sacrificing emission tunability or ease of synthesis. Here, we report the low-temperature, solution-phase growth of cesium lead halide nanowires exhibiting low-threshold lasing and high stability. The as-grown nanowires are single crystalline with well-formed facets, and act as high-quality laser cavities. The nanowires display excellent stability while stored and handled under ambient conditions over the course of weeks. Upon optical excitation, Fabry–Pérot lasing occurs in CsPbBr3 nanowires with an onset of 5 μJ cm−2 with the nanowire cavity displaying a maximum quality factor of 1,009 ± 5. Lasing under constant, pulsed excitation can be maintained for over 1 h, the equivalent of 109 excitation cycles, and lasing persists upon exposure to ambient atmosphere. Wavelength tunability in the green and blue regions of the spectrum in conjunction with excellent stability makes these nanowire lasers attractive for device fabrication. PMID:26862172

  4. Design alternatives report for the cesium removal demonstration

    SciTech Connect

    Walker, J.F. Jr.; Youngblood, E.L.

    1995-09-01

    The Cesium Removal Demonstration (CRD) project will use liquid low-level waste (LLLW) stored in the Oak Ridge National Laboratory Melton Valley Storage Tanks to demonstrate cesium removal from sodium nitrate-based supernates. This report presents the results of a conceptual design study to scope the alternatives for conducting the demonstration at ORNL. Factors considered included (1) sorbent alternatives, (2) facility alternatives, (3) process alternatives, (4) process disposal alternatives, and (5) relative cost comparisons. Recommendations included (1) that design of the CRD system move forward based on information obtained to date from tests with Savannah River Resin, (2) that the CRD system be designed so it could use crystalline silicotitanates (CST) if an engineered form of CST becomes available prior to the CRD, (3) that the system be designed without the capability for resin regeneration, (4) that the LLLW solidification facility be used for the demonstration (5) that vitrification of the loaded resins from the CRD be demonstrated at the Savannah River Site, and (6) that permanent disposal of the loaded and/or vitrified resin at the Nevada Test Site be pursued.

  5. Lasing in robust cesium lead halide perovskite nanowires.

    PubMed

    Eaton, Samuel W; Lai, Minliang; Gibson, Natalie A; Wong, Andrew B; Dou, Letian; Ma, Jie; Wang, Lin-Wang; Leone, Stephen R; Yang, Peidong

    2016-02-23

    The rapidly growing field of nanoscale lasers can be advanced through the discovery of new, tunable light sources. The emission wavelength tunability demonstrated in perovskite materials is an attractive property for nanoscale lasers. Whereas organic-inorganic lead halide perovskite materials are known for their instability, cesium lead halides offer a robust alternative without sacrificing emission tunability or ease of synthesis. Here, we report the low-temperature, solution-phase growth of cesium lead halide nanowires exhibiting low-threshold lasing and high stability. The as-grown nanowires are single crystalline with well-formed facets, and act as high-quality laser cavities. The nanowires display excellent stability while stored and handled under ambient conditions over the course of weeks. Upon optical excitation, Fabry-Pérot lasing occurs in CsPbBr3 nanowires with an onset of 5 μJ cm(-2) with the nanowire cavity displaying a maximum quality factor of 1,009 ± 5. Lasing under constant, pulsed excitation can be maintained for over 1 h, the equivalent of 10(9) excitation cycles, and lasing persists upon exposure to ambient atmosphere. Wavelength tunability in the green and blue regions of the spectrum in conjunction with excellent stability makes these nanowire lasers attractive for device fabrication.

  6. Adsorption of sodium and cesium on aggregates of C60

    NASA Astrophysics Data System (ADS)

    Harnisch, Martina; Daxner, Matthias; Scheier, Paul; Echt, Olof

    2016-09-01

    We explore the formation of C60 sodium and C60 cesium complexes in superfluid helium nanodroplets. Anomalies in mass spectra of these doped droplets reveal anomalies in the stability of ions. (C60) m Cs+ n ions ( m ≤ 6) are particularly abundant if they contain n = 6 m + 1 cesium atoms; (C60) m Cs2+ n dications ( m ≤ 3 or 5) are abundant if n = 6 m + 2. These findings are consistent with the notion that alkali metal atoms (A) transfer their valence electrons into the three-fold degenerate lowest unoccupied orbital of C60, resulting in particularly stable C60A6 building blocks. However, (C60) 4CsCs2+ n dications display an entirely different pattern; instead of an expected anomaly at n = 6 × 4 + 2 = 26 we observe a strong odd-even alternation starting at n = 6. Also surprising is the effect of adding one H2O or CO2 molecule to (C60) m Cs n mono- or dications; anomalies shift by two units as if the impurity were acting as an acceptor for two valence electrons from the alkali metal atoms.

  7. Uranium and cesium diffusion in fuel cladding of electrogenerating channel

    SciTech Connect

    Vasil’ev, I. V. Ivanov, A. S.; Churin, V. A.

    2014-12-15

    The results of reactor tests of a carbonitride fuel in a single-crystal cladding from a molybdenum-based alloy can be used in substantiating the operational reliability of fuels in developing a project of a megawatt space nuclear power plant. The results of experimental studies of uranium and cesium penetration into the single-crystal cladding of fuel elements with a carbonitride fuel are interpreted. Those fuel elements passed nuclear power tests in the Ya-82 pilot plant for 8300 h at a temperature of about 1500°C. It is shown that the diffusion coefficients for uranium diffusion into the cladding are virtually coincident with the diffusion coefficients measured earlier for uranium diffusion into polycrystalline molybdenum. It is found that the penetration of uranium into the cladding is likely to occur only in the case of a direct contact between the cladding and fuel. The experimentally observed nonmonotonic uranium-concentration profiles are explained in terms of predominant uranium diffusion along grain boundaries. It is shown that a substantially nonmonotonic behavior observed in our experiment for the uranium-concentration profile may be explained by the presence of a polycrystalline structure of the cladding in the surface region from its inner side. The diffusion coefficient is estimated for the grain-boundary diffusion of uranium. The diffusion coefficients for cesium are estimated on the basis of experimental data obtained in the present study.

  8. Scintillation Characterization of Doped Cesium Hafnium Chloride (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Rowe, Emmanuel; Goodwin, Brandon; Bhattacharya, Pijush; Burger, Arnold; Stowe, Ashley; Cherepy, Nerine; Payne, Steve

    2016-09-01

    The scintillators currently providing the best energy resolution lower than 2.6% at 662 keV and sizes larger than 1 in. dia. 1 in. height are LaBr3(Ce) and SrI2(Eu). Despite energy resolution and decay time performance of LaBr3(Ce), the intrinsic radioactivity, due to naturally occurring 138La isotope in the matrix is a limitation for low count rate applications such as radioisotope identification of weak sources. Cesium Hafnium Chloride (CHC) is a high effective atomic number (Zeff=58) moderate density (3.86 g/cm3) scintillator for gamma spectroscopy, offering a cubic crystal structure, no intrinsic radioactivity, and highly proportional light yield, without intentional doping. CHC boasts a cubic crystal structure that is isostructural to K2HfCl6 and analogous to calcium fluoride with cesium ions in the fluorine ion position and the [HfCl6]2- octahedral replacing calcium ions. The scintillation of CHC is centered at 400 nm, with a principal decay time of 4.37 μs, a light yield of up to 54,000 photons/MeV and energy resolution of 3.3% at 662 keV and we report on the effects of doping on the scintillation properties of CHC.

  9. Electron emission from nickel-alloy surfaces in cesium vapor

    NASA Technical Reports Server (NTRS)

    Manda, M.; Jacobson, D.

    1978-01-01

    An experimental apparatus and measurement techniques are described for measuring the thermionic emission from cesium-activated materials having adequate high-temperature properties such as creep strength and corrosion resistance, which might ultimately reduce the cost of thermionic converters. The electron emission characteristics are measured for nickel, Inconel 600, and Hastelloy X probes with a 412 K cesium reservoir. It is found that the nickel alloys exhibit a peak electron emission 1.4 to 2.1 times greater than pure nickel. Both the Inconel and the Hastelloy samples have work functions of 1.64 eV at peak emission. The minimum cesiated work functions are estimated to be 1.37 eV for Inconel at a probe temperature of 750 K and 1.4 eV for Hastelloy at a probe temperature of 665 K. The bare work functions for both alloys is estimated to be about the same as for pure nickel, 4.8 eV.

  10. Equilibrium, kinetic and thermodynamic study of cesium adsorption onto nanocrystalline mordenite from high-salt solution.

    PubMed

    Lee, Keun-Young; Park, Minsung; Kim, Jimin; Oh, Maengkyo; Lee, Eil-Hee; Kim, Kwang-Wook; Chung, Dong-Yong; Moon, Jei-Kwon

    2016-05-01

    In this study, the equilibrium, kinetics and thermodynamics of cesium adsorption by nanocrystalline mordenite were investigated under cesium contamination with high-salt solution, simulating the case of an operation and decommissioning of nuclear facilities or an accident during the processes. The adsorption rate constants were determined using a pseudo second-order kinetic model. The kinetic results strongly demonstrated that the cesium adsorption rate of nano mordenite is extremely fast, even in a high-salt solution, and much faster than that of micro mordenite. In the equilibrium study, the Langmuir isotherm model fit the cesium adsorption data of nano mordenite better than the Freundlich model, which suggests that cesium adsorption onto nano mordenite is a monolayer homogeneous adsorption process. The obtained thermodynamic parameters indicated that the adsorption involved a very stable chemical reaction. In particular, the combination of rapid particle dispersion and rapid cesium adsorption of the nano mordenite in the solution resulted in a rapid and effective process for cesium removal without stirring, which may offer great advantages for low energy consumption and simple operation.

  11. High-temperature sorption of cesium and strontium on dispersed kaolinite powders.

    PubMed

    Yoo, Jong-Ik; Shinagawa, Takuya; Wood, Joseph P; Linak, William P; Santoianni, Dawn A; King, Charles J; Seo, Yong-Chil; Wendt, Jost O L

    2005-07-01

    Sorption of cesium and strontium on kaolinite powders was investigated as a means to minimize the emissions of these metals during certain high-temperature processes currently being developed to isolate and dispose of radiological and mixed wastes. In this work, nonradioactive aqueous cesium acetate or strontium acetate was atomized down the center of a natural gas flame supported on a variable-swirl burner in a refractory-lined laboratory-scale combustion facility. Kaolinite powder was injected at a postflame location in the combustor. Cesium readily vaporized in the high-temperature regions of the combustor, but was reactively scavenged onto dispersed kaolinite. Global sorption mechanisms of cesium vapor on kaolinite were quantified, and are related to those available in the literature for sodium and lead. Both metal adsorption and substrate deactivation steps are important, so there is an optimum temperature, between 1400 and 1500 K, at which maximum sorption occurs. The presence of chlorine inhibits cesium sorption. In contrast to cesium, and in the absence of chlorine, strontium was only partially vaporized and was, therefore, only partially scavengeable. The strontium data did not allow quantification of global kinetic mechanisms of interaction, although equilibrium arguments provided insight into the effects of chlorine on strontium sorption. These results have implications for the use of sorbents to control cesium and strontium emissions during high-temperature waste processing including incineration and vitrification.

  12. Study of ferroelectric characteristics of diisopropylammonium bromide films

    NASA Astrophysics Data System (ADS)

    Thirmal, C.; Biswas, P. P.; Shin, Y. J.; Noh, T. W.; Giridharan, N. V.; Venimadhav, A.; Murugavel, P.

    2016-09-01

    Organic molecular ferroelectrics are highly desirable due to their numerous advantages. In the present work, a thick film of diisopropylammonium bromide organic molecular ferroelectric is fabricated on the ITO/glass substrate. The grown film shows preferential orientation along the c-axis with a ferroelectric transition at 419 K. The piezoresponse force microscopic measurements are done in a dual ac resonance tracking mode for its switching characteristics. The amplitude and phase images of the oppositely written domain patterns exhibit a clear contrast with 180° phase difference. The dynamical spectroscopic studies reveal a butterfly loop in amplitude and hysteretic character of the phase which are the expected characteristics features of ferroelectrics. In addition, the macroscopic polarization versus electric field hysteresis gives an additional proof for ferroelectric character of the film with the maximum polarization of 3.5 μC/cm2. Overall, we have successfully fabricated diisopropylammonium bromide organic films and demonstrated its room temperature ferroelectric characteristics.

  13. A novel and robust conditioning lesion induced by ethidium bromide

    PubMed Central

    Hollis, Edmund R; Ishiko, Nao; Tolentino, Kristine; Doherty, Ernest; Rodriguez, Maria J.; Calcutt, Nigel A.; Zou, Yimin

    2015-01-01

    Molecular and cellular mechanisms underlying the peripheral conditioning lesion remain unsolved. We show here that injection of a chemical demyelinating agent, ethidium bromide, into the sciatic nerve induces a similar set of regeneration-associated genes and promotes a 2.7-fold greater extent of sensory axon regeneration in the spinal cord than sciatic nerve crush. We found that more severe peripheral demyelination correlates with more severe functional and electrophysiological deficits, but more robust central regeneration. Ethidium bromide injection does not activate macrophages at the demyelinated sciatic nerve site, as observed after nerve crush, but briefly activates macrophages in the dorsal root ganglion. This study provides a new method for investigating the underlying mechanisms of the conditioning response and suggests that loss of the peripheral myelin may be a major signal to change the intrinsic growth state of adult sensory neurons and promote regeneration. PMID:25541322

  14. Thermal stability of octadecyltrimethylammonium bromide modified montmorillonite organoclay.

    PubMed

    Xi, Yunfei; Zhou, Qin; Frost, Ray L; He, Hongping

    2007-07-15

    Organoclays are significant for providing a mechanism for the adsorption of organic molecules from potable water. As such their thermal stability is important. A combination of thermogravimetric analysis and infrared emission spectroscopy was used to determine this stability. Infrared emission spectroscopy (IES) was used to investigate the changes in the structure and surface characteristics of water and surfactant molecules in montmorillonite, octadecyltrimethylammonium bromide and organoclays prepared with the surfactant octadecyltrimethylammonium bromide with different surfactant loadings. These spectra collected at different temperatures give support to the results obtained from the thermal analysis and also provide additional evidence for the dehydration which is difficult to obtain by normal thermoanalytical techniques. The spectra provide information on the conformation of the surfactant molecules in the clay layers and the thermal decomposition of the organoclays. Infrared emission spectroscopy proved to be a useful tool for the study of the thermal stability of the organoclays.

  15. Aluminium Electroplating on Steel from a Fused Bromide Electrolyte

    SciTech Connect

    Prabhat Tripathy; Laura Wurth; Eric Dufek; Toni Y. Gutknecht; Natalie Gese; Paula Hahn; Steven Frank; Guy Fredrickson; J Stephen Herring

    2014-08-01

    A quaternary bromide bath (LiBr-KBr-CsBr-AlBr3) was used to electro-coat aluminium on steel substrates. The electrolyte was prepared by the addition of AlBr3 into the eutectic LiBr-KBr-CsBr melt. A smooth, thick, adherent and shiny aluminium coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminium coverage. Both salt immersion and open circuit potential measurement suggest that the coatings did display good corrosion-resistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminium coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminium coating on both ferrous and non-ferrous metals, including complex surfaces/geometries.

  16. Aluminum electroplating on steel from a fused bromide electrolyte

    SciTech Connect

    Prabhat K. Tripathy; Laura A. Wurth; Eric J. Dufek; Toni Y. Gutknecht; Natalie J. Gese; Paula Hahn; Steven M. Frank; Guy L. Frederickson; J. Stephen Herring

    2014-08-01

    A quaternary bromide bath (LiBr–KBr–CsBr–AlBr3) was used to electro-coat aluminum on steel substrates. The electrolytewas prepared by the addition of AlBr3 into the eutectic LiBr–KBr–CsBr melt. A smooth, thick, adherent and shiny aluminum coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminum coverage. Both salt immersion and open circuit potential measurement suggested that the coatings did display a good corrosionresistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminum coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminumcoating on both ferrous and non-ferrous metals, including complex surfaces/geometries.

  17. [The compatibility between packing material and ipratropium bromide aerosol].

    PubMed

    Yue, Zhi-hua; Shen, Dian-dian; Hu, Chang-qin

    2010-08-01

    With the establishment of HPLC and LC-MS methods to determine the related substances and the content of active pharmaceutical ingredient (API) in ipratropium bromide aerosol products, several packing material-related impurities were identified, including antioxygen BHT and antioxygen 2246. Results showed that these leachable additives from the packing materials may present at a relative high level in the drug solution, and the low content of API in the drug products is usually due to the adsorption of the packing material as well as the leaking of contents. The current available assay methods for the control of ipratropium bromide aerosol products are often lack of specificity and unable to assure the drug quality effectively. To meet the increasing attention on the regulations of drug packing materials, our research would be a pilot study, indicating that the inappropriate packing materials could cause the migration and adsorption of the active ingredients, and the importance to have compatibility studies between packing materials and drugs.

  18. Effect of bromide and nitrite on the degradation of monochloramine

    SciTech Connect

    Valentine, R.L.; Selleck, R.E.

    1981-10-01

    The results indicate that relatively small concentrations of nitrite can greatly accelerate the degradation of monochloramine in the presence of bromide. It does not appear that nitrite is being significantly consumed in a 1:1 stoichiometric oxidation by monochloramine. If the effect of nitrite is catalytic then these results suggest that the presence of nitrite may also accelerate other oxidation-reduction reactions. For example, nitrite may play an important role in oxidant decay in partially nitrified sewage effluents where both monochloramine and nitrite may be present. If not a complex oxidation-reduction possibly involving bromide as a catalyst is indicated. The results also suggest that the presence of other potentially oxidizable species may affect oxidant decay in a manner not attributable to a simple parallel oxidation.

  19. Preliminary Evaluation of Cesium Distribution for Wet Sieving Process Planned for Soil Decontamination in Japan - 13104

    SciTech Connect

    Enokida, Y.; Tanada, Y.; Hirabayashi, D.; Sawada, K.

    2013-07-01

    For the purpose of decontaminating radioactive cesium from a huge amount of soil, which has been estimated to be 1.2x10{sup 8} m{sup 3} by excavating to a 5-cm depth from the surface of Fukushima Prefecture where a severe nuclear accident occurred at TEPCO's power generating site and has emitted a significant amount of radioactive materials, mainly radioactive cesium, a wet sieving process was selected as one of effective methods available in Japan. Some private companies have demonstrated this process for soil treatment in the Fukushima area by testing at their plants. The results were very promising, and a full-fledged application is expected to follow. In the present study, we spiked several aqueous samples containing soil collected from an industrial wet sieving plant located near our university for the recycling of construction wastes with non-radioactive cesium hydroxide. The present study provides scientific data concerning the effectiveness in volume reduction of the contaminated soil by a wet sieving process as well as the cesium distribution between the liquid phase and clay minerals for each sub-process of the full-scale one, but a simulating plant equipped with a process of coagulating sedimentation and operational safety fundamentals for the plant. Especially for the latter aspect, the study showed that clay minerals of submicron size strongly bind a high content of cesium, which was only slightly removed by coagulation with natural sedimentation (1 G) nor centrifugal sedimentation (3,700 G) and some of the cesium may be transferred to the effluent or recycled water. By applying ultracentrifugation (257,000 G), most of submicron clay minerals containing cesium was removed, and the cesium amount which might be transferred to the effluent or recycled water, could be reduced to less than 2.3 % of the original design by the addition of a cesium barrier consisting of ultracentrifugation or a hollow fiber membrane. (authors)

  20. A Lithium Bromide Absorption Chiller with Cold Storage

    DTIC Science & Technology

    2011-01-15

    TO R A G E A LITHIUM BROMIDE ABSORPTION CHILLER WITH COLD STORAGE William Gerstler, et al, General Electric Global Research UNCLASSIFIED UNLIMITED...Research ABSTRACT A LiBr-based absorption chiller can use waste heat or solar energy to produce useful space cooling for small buildings...However, operating this absorption chiller at high ambient tem- peratures may result in performance degradation, crystallization in the absorber, and

  1. Conservative tracer bromide inhibits pesticide mineralisation in soil.

    PubMed

    Bech, Tina B; Rosenbom, Annette E; Sørensen, Sebastian R; Jacobsen, Carsten S

    2017-03-01

    Bromide is a conservative tracer that is often applied with non-conservative solutes such as pesticides to estimate their retardation in the soil. It has been applied in concentrations of up to 250 g Br L(-1), levels at which the growth of single-celled organisms can be inhibited. Bromide applications may therefore affect the biodegradation of non-conservative solutes in soil. The present study investigated the effect of potassium bromide (KBr) on the mineralisation of three pesticides - glyphosate, MCPA and metribuzin - in four agricultural A-horizon soils. KBr was added to soil microcosms at concentrations of 0, 0.5, 2.5 and 5 g Br(-) L(-1) in the soil solution. The study concluded that KBr had a negative effect on pesticide mineralisation. The inhibitory effect varied depending on the KBr concentration, the type of pesticide and the type of soil. Furthermore, 16 S amplicon sequencing revealed that the KBr treatment generally reduced the abundance of bacteroidetes and proteobacteria on both an RNA and DNA level. Therefore, in order to reduce the effect of KBr on the soil bacterial community and consequently also on xenobiotic degradation, it is recommended that KBr be applied in a concentration that does not exceed 0.5 g Br(-) L(-1) in the soil water.

  2. The Thz Absorption of Methyl Bromide (CH_3BR)

    NASA Astrophysics Data System (ADS)

    Ramos, Marlon; Drouin, Brian J.

    2011-06-01

    The possibility of monitoring Methyl Bromide is of interest for both environmental and health concerns. It has an ozone depletion potential of 0.2% and falls under regulations of the Clean Air Act. Neurological effects from long term exposure may result from its major use as a pesticide. Recent improvements in microwave limb sounding at mm & submm wavelengths have resulted in retrievals of Methyl Chloride from atmospheric spectra. It is conceivable that Methyl Bromide would also be measurable by this technique. In an effort to extend and improve the previous work, the THz spectrum of Methyl Bromide has been measured at JPL. We used an isotopically enriched 13CH_3Br (90%) sample and recorded spectra from 750 - 1200 GHz. Our assignment covers the CH_379Br, CH_381Br, 13CH_379Br and 13CH_381Br isotopologues with J< 66 and K< 17 for the ground vibrational state. We plan to assign vibrational satellites and investigate possible perturbations near K =12 in the ground state.

  3. Test procedures and instructions for single shell tank saltcake cesium removal with crystalline silicotitanate

    SciTech Connect

    Duncan, J.B.

    1997-01-07

    This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test, using Hanford Single Shell Tank Saltcake from tanks 24 t -BY- I 10, 24 1 -U- 108, 24 1 -U- 109, 24 1 -A- I 0 1, and 24 t - S-102, in a bench-scale column. The cesium sorbent to be tested is crystalline siticotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-024, Hanford Single Shell Tank Saltcake Cesium Removal Test Plan.

  4. Effects of mineralogy on sorption of strontium and cesium onto Calico Hills Tuff

    SciTech Connect

    Meyer, R.E.; Arnold, W.D.; Case, F.I.; O`Kelley, G.D.; Land, J.F.

    1990-04-01

    The sorption properties of tuff formations at the proposed site for the high-level nuclear waste repository at Yucca Mountain, Nevada, have been extensively studied. Sorption and desorption measurements were made of strontium and cesium onto clinoptilolite and Calico Hills Tuff. The object was to see whether there was a correlation between sorption of strontium and cesium onto Calico Hills Tuff and the sorption of strontium and cesium onto clinoptilolite based on the content of clinoptilolite in the Calico Hills Tuff. 13 refs., 10 figs., 6 tabs.

  5. Historical cost curves for hydrogen masers and cesium beam frequency and timing standards

    NASA Astrophysics Data System (ADS)

    Remer, D. S.; Moore, R. C.

    1985-02-01

    Historical cost curves were developed for hydrogen masers and cesium beam standards used for frequency and timing calibration in the Deep Space Network. These curves may be used to calculate the cost of future hydrogen masers or cesium beam standards in either future or current dollars. The cesium beam standards are decreasing in cost by about 2.3% per year since 1966, and hydrogen masers are decreasing by about 0.8% per year since 1978 relative to the National Aeronautics and Space Administration inflation index.

  6. High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1974-01-01

    Lanthanum hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium diode performance should result from the lower collector temperatures allowed for earth and low power space duties. Decreased temperatures will lessen thermal transport losses that attend thermionic conversion mechanisms. Such advantages will add to those from collector Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high efficiency, low temperature cesium diodes with lanthanum hexaboride electrodes appear feasible.

  7. Comparative analysis of cesium and potassium uptake in onion Allium cepa L.

    NASA Astrophysics Data System (ADS)

    Urban, P. Ł.; Bystrzejewska-Piotrowska, G.

    2003-01-01

    Cesium uptake in onion (from 0.3 mM CsCl solution traced with 137CsCl) has been examined. The highest uptake occurred at pH 4-5 and it decreased with increasing pH. The intensity of Cs translocation depended on acidity of the solution. For acidic solutions, translocation of cesium into bulbs and leaves was greater than in case of alkaline solutions, where most of the cesium remained in the roots. Addition of potassium into the solutions (millimolar K concentrations) inhibits Cs uptake. The potassium pH-influx/efflux characteristic does not coincide with the Cs uptake.

  8. First-principles study of cesium adsorption to weathered micaceous clay minerals

    NASA Astrophysics Data System (ADS)

    Okumura, Masahiko; Nakamura, Hiroki; Machida, Masahiko

    2014-05-01

    A large amount of radioactive nuclides was produced into environment due to the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident. Residents near FDNPP were suffering from radioactive cesium and then evacuated, because which has long half-life and is retained by surface soil for long time. The Japanese government has been decontaminating the cesium by removing the surface soil in order to return them to their home. This decontamination method is very effective, but which produces huge amount of waste soil. This becomes another big problem in Fukushima, because it is not easy to find large storage sites. Then effective and economical methods to reduce the volume of the waste soil are needed. However, it has not been invented yet. One of the reasons is lack of knowledge about microscopic process of adsorption/desorption of cesium to/from soil. It is known that weathered micaceous clay minerals play crucial role on adsorption and retention of cesium. They are expected to have special sorption sites, called frayed edge sites (FESs), which adsorb cesium selectively and irreversibly. Properties of FES have been intensely investigated by experiments. But microscopic details of the adsorption process on FES are still unclear. Because direct observation of the process with current experimental techniques is quite difficult. We investigated the adsorption of cesium to FES in muscovite, which is a typical micaceous clay mineral, via first-principles calculations (density functional theory). We made a minimal model of FES and evaluate the energy difference before and after cesium adsorption to FES. This is the first numerical modeling of FES. It was shown that FES does adsorb cesium if the weathering of muscovite has been weathered. In addition, we revealed the mechanism of cesium adsorption to FES, which is competition between ion radius of cesium and the degree of weathering. I plan to discuss volume reduction of the waste soil based on our result. Reference M. Okumura

  9. Stage I carcinoma of the endometrium: a 5-year experience utilizing preoperative cesium

    SciTech Connect

    Belinson, J.L.; Spirou, B.; McClure, M.; Badger, G.; Pretorius, R.G.; Roland, T.A.

    1985-03-01

    A treatment protocol for the management of stage I endometrial carcinoma utilizing preoperative cesium is evaluated. One hundred and twelve consecutive patients were treated according to this protocol over a 5-year period. Based on this experience and a literature review a new protocol is recommended. The significant changes include primary surgery without preoperative cesium, primary treatment based on grade without regard to uterine size, modified radical hysterectomy for G3 tumors, pelvic radiotherapy for clear cell carcinoma confined to the pelvis regardless of depth of invasion, cytoxan, adriamycin, and cis-platinum for papillary serous tumors, and postoperative vaginal cuff cesium for G2 and G3 tumors not requiring pelvic radiotherapy.

  10. X-ray photoemission studies of superficially oxidized cesium antimonide photoemitters

    NASA Technical Reports Server (NTRS)

    Bates, C. W., Jr.; Wertheim, G. K.; Buchanan, D. N. E.; Clements, K. E.; Van Atekum, T. M.

    1981-01-01

    Superficially oxidized cesium antimonide photoemitting surfaces prepared in ultrahigh vacuum were studied by X-ray photoelectron spectroscopy. Oxidation of Cs3Sb to produce a surface with enhanced photosensitivity converts part of the antimony to elemental antimony and part of the cesium to cesium suboxide. The latter is identified on the basis of an O1 s peak at 531.3 eV, characteristic of Cs11O3. The production of Cs2O is not ruled out in this process since its signature at 527.5 eV is masked by an antimony shake-up peak at 527 eV.

  11. The Diagnostics Of Hydrogen-Cesium Plasma Using Fully Relativistic Electron Impact Cross Sections

    NASA Astrophysics Data System (ADS)

    Priti, Priti; Dipti, Dipti; Gangwar, Reetesh; Srivastava, Rajesh

    2016-10-01

    Electron excitation cross-sections and rate coefficients have been calculated using fully relativistic distorted wave theory for several fine-structure transitions from the ground as well as excited states of cesium atom in the wide range of incident electron energy. These processes play dominant role in low pressure hydrogen-cesium plasma relevant to the negative ion based neutral beam injectors for the ITER project. The calculated cross-sections are used to construct a reliable collisional radiative (CR) model to characterize the hydrogen-cesium plasma. The calculated plasma parameters are compared with the available experimental and theoretical results.

  12. High voltage holding in the negative ion sources with cesium deposition

    SciTech Connect

    Belchenko, Yu.; Abdrashitov, G.; Ivanov, A.; Sanin, A.; Sotnikov, O.

    2016-02-15

    High voltage holding of the large surface-plasma negative ion source with cesium deposition was studied. It was found that heating of ion-optical system electrodes to temperature >100 °C facilitates the source conditioning by high voltage pulses in vacuum and by beam shots. The procedure of electrode conditioning and the data on high-voltage holding in the negative ion source with small cesium seed are described. The mechanism of high voltage holding improvement by depletion of cesium coverage is discussed.

  13. Microstructure analysis for chemical interaction between cesium and SUS 316 steel in fast breeder reactor application

    SciTech Connect

    Sasaki, K.; Fukumoto, K. I.; Oshima, T.; Tanigaki, T.; Masayoshi, U.

    2012-07-01

    In this study the corrosion products on a surface after cesium corrosion examination at 650 deg. C for 100 hrs were characterized by TEM observation around the corroded area on the surface in order to understand the corrosion mechanism of cesium fission product for cladding materials in fast reactor. The experimental results suggest the main corrosion mechanism occurred in the process of the separation of cesium chromate and metal (Fe, Ni). The main reaction of corrosion process was considered to be equation, 2Cs + 7/2 O{sub 2} + 2Cr {yields} Cs{sub 2}Cr{sub 2}O{sub 7}(L). (authors)

  14. Historical Cost Curves for Hydrogen Masers and Cesium Beam Frequency and Timing Standards

    NASA Technical Reports Server (NTRS)

    Remer, D. S.; Moore, R. C.

    1985-01-01

    Historical cost curves were developed for hydrogen masers and cesium beam standards used for frequency and timing calibration in the Deep Space Network. These curves may be used to calculate the cost of future hydrogen masers or cesium beam standards in either future or current dollars. The cesium beam standards are decreasing in cost by about 2.3% per year since 1966, and hydrogen masers are decreasing by about 0.8% per year since 1978 relative to the National Aeronautics and Space Administration inflation index.

  15. Hydrogen and Cesium Monitor for H- Magnetron Sources

    SciTech Connect

    Tan, Cheng-Yang; Bollinger, Dan; Schupbach, Brian; Seiya, Kiyomi

    2014-07-01

    The relative concentration of cesium to hydrogen in the plasma of a H- magnetron source is an important parameter for reliable operations. If there is too much cesium, the surfaces of the source become contaminated with it and sparking occurs. If there is too little cesium then the plasma cannot be sustained. In order to monitor these two elements, a spectrometer has been built and installed on a test and operating source that looks at the plasma. It is hypothesized that the concentration of each element in the plasma is proportional to the intensity of their spectral lines.

  16. Radioactive and Stable Cesium Distributions in Fukushima Forests

    NASA Astrophysics Data System (ADS)

    Ioshchenko, V.; Kivva, S.; Konoplev, A.; Nanba, K.; Onda, Y.; Takase, T.; Zheleznyak, M.

    2015-12-01

    Fukushima Dai-ichi NPP accident has resulted in release into the environment of large amounts of 134Cs and 137Cs and in radioactive contamination of terrestrial and aquatic ecosystems. In Fukushima prefecture up to 2/3 of the most contaminated territory is covered with forests, and understanding of its further fate in the forest ecosystems is essential for elaboration of the long-term forestry strategy. At the early stage, radiocesium was intercepted by the trees' canopies. Numerous studies reported redistribution of the initial fallout in Fukushima forests in the followed period due to litterfall and leaching of radiocesium from the foliage with precipitations. By now these processes have transported the major part of deposited radiocesium to litter and soil compartments. Future levels of radiocesium activities in the aboveground biomass will depend on relative efficiencies of the radiocesium root uptake and its return to the soil surface with litterfall and precipitations. Radiocesium soil-to-plant transfer factors for typical tree species, soil types and landscape conditions of Fukushima prefecture have not been studied well; moreover, they may change in time with approaching to the equilibrium between radioactive and stable cesium isotopes in the ecosystem. The present paper reports the results of several ongoing projects carried out by Institute of Environmental Radioactivity of Fukushima University at the experimental sites in Fukushima prefecture. For typical Japanese cedar (Cryptomeria japonica) forest, we determined distributions of radiocesium in the ecosystem and in the aboveground biomass compartments by the end of 2014; available results for 2015 are presented, too, as well as the results of test application of D-shuttle dosimeters for characterization of seasonal variations of radiocesium activity in wood. Based on the radiocesium activities in biomass we derived the upper estimates of its incorporation and root uptake fluxes, 0.7% and 3% of the total

  17. Beta Decay Measurements of Neutron Deficient Cesium Isotopes.

    NASA Astrophysics Data System (ADS)

    Parry, Roger Franklin

    The study of nuclei far from beta stability provides information on nuclear binding energies and nuclear structure. However, as one progresses away from the valley of stability, the associated half-lives and production cross sections decrease with increasing interference from the decays of adjacent nuclei. An experimental solution to these problems was the use of the He-jet fed on-line mass separator, RAMA. This instrument provided a fast and selective technique for the mass separation necessary for the investigation of exotic nuclei. Using this device, a beta decay Q-value study of the neutron deficient cesium isotopes, ('119-123)Cs, was conducted. Beta decay endpoint energy measurements of the neutron deficient cesium isotopes were done using an energy spectrum shape fitting technique. This was a departure from the typical method of endpoint energy analysis, the Fermi-Kurie plot. A discussion of the shape fitting procedure and its improved features are discussed. These beta endpoint measurements have led to total decay energies (Q(,EC)) of the neutron deficient ('119 -123)Cs isotopes. The total decay energies of ('122m)Cs (Q(,EC) = 6.95 (+OR-) 0.25 MeV) and ('119)Cs (Q(,EC) = 6.26 (+OR-) 0.29 MeV) were new measurements. The total decay energies of ('123)Cs (Q(,EC) = 4.05 (+OR-) 0.18 MeV), ('122g)Cs (Q(,EC) = 7.05 (+OR-) 0.18 MeV), ('121)Cs (Q(,EC) = 5.21 (+OR-) 0.22 MeV), and ('120)Cs (Q(,EC) = 7.38 (+OR -) 0.23 MeV) were measurements with significantly improved uncertainties as compared to the literature. Further, a combination of the energy levels derived from previous literature gamma-gamma coincident measurements and the experimental beta-coincident gamma decay energies has supported an improved level scheme for ('121)Xe and the proposal of three new energy levels in ('119)Xe. Comparison of the experimental cesium mass excesses (determined with our Q(,EC) values and known xenon mass excesses) with both the literature and theoretical predicted values showed

  18. a Biokinetic Model for CESIUM-137 in the Fetus

    NASA Astrophysics Data System (ADS)

    Jones, Karen Lynn

    1995-01-01

    Previously, there was no method to determine the dose to the embryo, fetus, fetal organs or placenta from radionuclides within the embryo, fetus, or placenta. In the past, the dose to the fetus was assumed to be equivalent to the dose to the uterus. Watson estimated specific absorbed fractions from various maternal organs to the uterine contents which included the fetus, placenta, and amniotic fluid and Sikov estimated the absorbed dose to the embryo/fetus after assuming 1 uCi of radioactivity was made available to the maternal blood.^{1,2} However, this method did not allow for the calculation of a dose to individual fetal organs or the placenta. The radiation dose to the embryo or fetus from Cs-137 in the fetus and placenta due to a chronic ingestion by the mother was determined. The fraction of Cs-137 in the maternal plasma crossing the placenta to the fetal plasma was estimated. The absorbed dose from Cs-137 in each modelled fetal organ was estimated. Since there has been more research regarding potassium in the human body, and particularly in the pregnant woman, a biokinetic model for potassium was developed first and used as a basis and confirmation of the cesium model. Available pertinent information in physiology, embryology, biokinetics, and radiation dosimetry was utilized. Due to the rapid growth of the fetus and placenta, the pregnancy was divided into four gestational periods. The numerous physiological changes that occurred during pregnancy were considered and an appropriate biokinetic model was developed for each of the gestational periods. The amount of cesium in the placenta, embryo, and fetus was estimated for each period. The dose to the fetus from cesium deposited in the embryo or fetus and in the placenta was determined for each period using Medical Internal Radiation Dosimetry (MIRD) methodology. An uncertainty analysis was also performed to account for the variability of the parameters in the biokinetic model based on the experimental data

  19. In Situ Transmission Electron Microscopy Study of Electron Beam-Induced Transformations in Colloidal Cesium Lead Halide Perovskite Nanocrystals.

    PubMed

    Dang, Zhiya; Shamsi, Javad; Palazon, Francisco; Imran, Muhammad; Akkerman, Quinten A; Park, Sungwook; Bertoni, Giovanni; Prato, Mirko; Brescia, Rosaria; Manna, Liberato

    2017-02-28

    An increasing number of studies have recently reported the rapid degradation of hybrid and all-inorganic lead halide perovskite nanocrystals under electron beam irradiation in the transmission electron microscope, with the formation of nanometer size, high contrast particles. The nature of these nanoparticles and the involved transformations in the perovskite nanocrystals are still a matter of debate. Herein, we have studied the effects of high energy (80/200 keV) electron irradiation on colloidal cesium lead bromide (CsPbBr3) nanocrystals with different shapes and sizes, especially 3 nm thick nanosheets, a morphology that facilitated the analysis of the various ongoing processes. Our results show that the CsPbBr3 nanocrystals undergo a radiolysis process, with electron stimulated desorption of a fraction of bromine atoms and the reduction of a fraction of Pb(2+) ions to Pb(0). Subsequently Pb(0) atoms diffuse and aggregate, giving rise to the high contrast particles, as previously reported by various groups. The diffusion is facilitated by both high temperature and electron beam irradiation. The early stage Pb nanoparticles are epitaxially bound to the parent CsPbBr3 lattice, and evolve into nonepitaxially bound Pb crystals upon further irradiation, leading to local amorphization and consequent dismantling of the CsPbBr3 lattice. The comparison among CsPbBr3 nanocrystals with various shapes and sizes evidences that the damage is particularly pronounced at the corners and edges of the surface, due to a lower diffusion barrier for Pb(0) on the surface than inside the crystal and the presence of a larger fraction of under-coordinated atoms.

  20. In Situ Transmission Electron Microscopy Study of Electron Beam-Induced Transformations in Colloidal Cesium Lead Halide Perovskite Nanocrystals

    PubMed Central

    2017-01-01

    An increasing number of studies have recently reported the rapid degradation of hybrid and all-inorganic lead halide perovskite nanocrystals under electron beam irradiation in the transmission electron microscope, with the formation of nanometer size, high contrast particles. The nature of these nanoparticles and the involved transformations in the perovskite nanocrystals are still a matter of debate. Herein, we have studied the effects of high energy (80/200 keV) electron irradiation on colloidal cesium lead bromide (CsPbBr3) nanocrystals with different shapes and sizes, especially 3 nm thick nanosheets, a morphology that facilitated the analysis of the various ongoing processes. Our results show that the CsPbBr3 nanocrystals undergo a radiolysis process, with electron stimulated desorption of a fraction of bromine atoms and the reduction of a fraction of Pb2+ ions to Pb0. Subsequently Pb0 atoms diffuse and aggregate, giving rise to the high contrast particles, as previously reported by various groups. The diffusion is facilitated by both high temperature and electron beam irradiation. The early stage Pb nanoparticles are epitaxially bound to the parent CsPbBr3 lattice, and evolve into nonepitaxially bound Pb crystals upon further irradiation, leading to local amorphization and consequent dismantling of the CsPbBr3 lattice. The comparison among CsPbBr3 nanocrystals with various shapes and sizes evidences that the damage is particularly pronounced at the corners and edges of the surface, due to a lower diffusion barrier for Pb0 on the surface than inside the crystal and the presence of a larger fraction of under-coordinated atoms. PMID:28122188

  1. Calculation of isotope shifts for cesium and francium

    SciTech Connect

    Dzuba, V.A.; Johnson, W.R.; Safronova, M.S.

    2005-08-15

    We perform ab initio calculations of isotope shifts for isotopes of cesium (from A=123 to A=137) and francium (from A=207 to A=228). These calculations start from the relativistic Hartree-Fock method and make use of several techniques to include correlations. The field (volume) isotope shift is calculated by means of an all-order correlation potential method and within the singles-doubles-partial-triples linearized coupled-cluster approach. Many-body perturbation theory in two different formulations is used to calculate the specific mass shift. We discuss the strong points and shortcomings of the different approaches and implications for parity nonconservation in atoms. Changes in nuclear charge radii are found by comparing the present calculations with experiment.

  2. Cesium and strontium sorption behavior in amended agricultural soils

    NASA Astrophysics Data System (ADS)

    Mehmood, Khalid; Hofmann, Diana; Burauel, Peter; Vereecken, Harry; Berns, Anne E.

    2014-05-01

    Biogas digestates and biochar are emerging soil amendments. Biochar is a byproduct of pyrolysis process which is thermal decomposition of biomass to produce syngas and bio-oil. The use of biochar for soil amendment is being promoted for higher crop yields and carbon sequestration. Currently, the numbers of biogas plants in Germany are increasing to meet the new energy scenarios. The sustainability of biogas industry requires proper disposal options for digestate. Biogas digestates being rich in nutrients are beneficial to enhance agricultural productions. Contrary to the agronomical benefits of these organic amendments, their use can influence the mobility and bioavailability of soil contaminants due to nutrients competition and high organic matter content. So far, the impact of such amendments on highly problematic contaminants like radionuclides is not truly accounted for. In the present study, sorption-desorption behavior of cesium and strontium was investigated in three soils of different origin and texture. Two agricultural soils, a loamy sand and a silty soil, were amended with biochar and digestate in separate experiments, with field application rates of 25 Mg/ha and 34 Mg/ha, respectively. For comparison a third soil, a forest soil, was incubated without any amendment. The amendments were mixed into the top 20 cm of the field soils, resulting in final concentrations of 8-9 g biochar/Kg soil and 11-12 g digestate/Kg soil. The soils were incubated for about six months at room temperature. Sorption-desorption experiments were performed with CsCl and SrCl2 after pre-equilibrating the soils with CaCl2 solutions. The amendments with field application rates did not have a significant effect on the relevant soil parameters responsible for the sorption behavior of the two radionuclides. Comparatively, the soil type lead to distinctive differences in sorption-desorption dynamics of the two radionuclides. Cesium showed a higher affinity for silty soil followed by

  3. Solution-Phase Synthesis of Cesium Lead Halide Perovskite Nanowires.

    PubMed

    Zhang, Dandan; Eaton, Samuel W; Yu, Yi; Dou, Letian; Yang, Peidong

    2015-07-29

    Halide perovskites have attracted much attention over the past 5 years as a promising class of materials for optoelectronic applications. However, compared to hybrid organic-inorganic perovskites, the study of their pure inorganic counterparts, like cesium lead halides (CsPbX3), lags far behind. Here, a catalyst-free, solution-phase synthesis of CsPbX3 nanowires (NWs) is reported. These NWs are single-crystalline, with uniform growth direction, and crystallize in the orthorhombic phase. Both CsPbBr3 and CsPbI3 are photoluminescence active, with composition-dependent temperature and self-trapping behavior. These NWs with a well-defined morphology could serve as an ideal platform for the investigation of fundamental properties and the development of future applications in nanoscale optoelectronic devices based on all-inorganic perovskites.

  4. Photoinduced charge transfer phase transition in cesium manganese hexacyanoferrate

    SciTech Connect

    Matsuda, Tomoyuki; Tokoro, Hiroko; Hashimoto, Kazuhito; Ohkoshi, Shin-ichi

    2007-05-01

    Cesium manganese hexacyanoferrate, Cs{sub 1.51}Mn[Fe(CN){sub 6}], shows a thermal phase transition between Mn{sup II}-NC-Fe{sup III} [high-temperature (HT) phase] and Mn{sup III}-NC-Fe{sup II} [low-temperature (LT) phase] with phase transition temperatures of 170 K (HT{yields}LT) and 230 K (LT{yields}HT). The LT phase shows ferromagnetism with Curie temperature of 7 K and coercive field of 60 Oe. Irradiating with 532 nm laser light converts the LT phase into the photoinduced (PI) phase, which does not have spontaneous magnetization. The electronic state of the PI phase corresponds to that of the HT phase and the relaxation temperature from the PI to the LT phase is observed at 90 K.

  5. Coherence properties of nanofiber-trapped cesium atoms.

    PubMed

    Reitz, D; Sayrin, C; Mitsch, R; Schneeweiss, P; Rauschenbeutel, A

    2013-06-14

    We experimentally study the ground state coherence properties of cesium atoms in a nanofiber-based two-color dipole trap, localized ∼ 200 nm away from the fiber surface. Using microwave radiation to coherently drive the clock transition, we record Ramsey fringes as well as spin echo signals and infer a reversible dephasing time of T(2)(*) = 0.6 ms and an irreversible dephasing time of T(2)(') = 3.7 ms. By modeling the signals, we find that, for our experimental parameters, T(2)(*) and T(2)(') are limited by the finite initial temperature of the atomic ensemble and the heating rate, respectively. Our results represent a fundamental step towards establishing nanofiber-based traps for cold atoms as a building block in an optical fiber quantum network.

  6. Hyperpolarized cesium ions doped in a glass material.

    PubMed

    Ishikawa, Kiyoshi

    2014-10-17

    Hyperpolarized (HP) (133)Cs nuclear magnetic resonance signals were measured from borosilicate glass cell walls during optical pumping of cesium vapor at high magnetic field (9.4T). Significant signal enhancements were observed when additional heating of the cell wall was provided by intense but non-resonant laser irradiation, with integrated HP (133)Cs NMR signals and line widths varying as a function of heating laser power (and hence glass temperature). Given that virtually no Cs ions would originally be present in the glass, absorbed HP Cs atoms rarely met thermally-polarized Cs ions already at the surface; thus, spin-exchange via nuclear dipole interaction cannot be the primary mechanism for injecting spin polarization into the glass. Instead, it is concluded that the absorption and transport of HP atoms into the glass material itself is the dominant mechanism of nuclear spin injection at high temperatures-the first reported experimental demonstration of such a mechanism.

  7. Trade study for the disposition of cesium and strontium capsules

    SciTech Connect

    Claghorn, R.D.

    1996-03-01

    This trade study analyzes alternatives for the eventual disposal of cesium and strontium capsules currently stored at the Waste Encapsulation and Storage Facility as by-product. However, for purposes of this study, it is assumed that at some time in the future, the capsules will be declared high-level waste and therefore will require disposal at an offsite geologic repository. The study considered numerous alternatives and selected three for detailed analysis: (1) overpack and storage at high-level waste canister storage building, (2) overpack at the high-level waste vitrification facility followed by storage at a high-level waste canister storage building, and (3) blend capsule contents with other high-level waste feed streams and vitrify at the high-level waste vitrification facility.

  8. Blue Satellite Bands and Photoassociation Spectra of Ultracold Cesium

    SciTech Connect

    Pichler, Marin; Qi Jainbing; Stwalley, William C.; Beuc, Robert; Pichler, Goran

    2006-11-22

    Atomic line self-broadening was observed in ultracold cesium. Using resonant ionization detection we were able to photoassociate atoms into excited states of ultracold molecules below the second excited PJ atomic asymptotes Cs(6S1/2) + Cs(7P1/2) and Cs(6S1/2) + Cs(7P3/2). We were able to observe blue detuned satellite band features at 560 MHz and 800 MHz above the 7P1/2 and 7P3/2 atomic limits, respectively, as well as sharp hyperfine split features on the blue and red side of the atomic resonances. Such spectral features can be qualitatively supported by the local maxima in the long range molecular structure beyond 50 A.

  9. Electron emission from nickel-alloy surfaces in cesium vapor

    NASA Technical Reports Server (NTRS)

    Manda, M.; Jacobson, D.

    1978-01-01

    The cesiated electron emission was measured for three candidate electrodes for use as collectors in thermionic converters. Nickel, Inconel 600 and Hastelloy were tested with a 412 K cesium reservoir. Peak emission from the alloys was found to be comparable to that from pure nickel. Both the Inconel and the Hastelloy samples had work functions of 1.64 eV at peak emission. The minimum work functions were estimated to be 1.37 eV at a probe temperature of 750 K for Inconel and 1.40 eV for Hastelloy at 665 K. The bare work function for both alloys is estimated to be approximately the same as for pure nickel, 4.8 eV.

  10. ATS-6 - Cesium bombardment engine north-south stationkeeping experiment

    NASA Technical Reports Server (NTRS)

    Worlock, R. M.; James, E. L.; Hunter, R. E.; Bartlett, R. O.

    1975-01-01

    Two 0.004 N thrust cesium bombardment ion thrustors have been developed and used for north-south stationkeeping in the geostationary Applications Technology Satellite-6 (ATS-6). The thrustor subsystems are mounted on the north and south faces of the earth viewing module such that 0.0026 N of thrust is applied normal to the orbit plane and 0.0036 N is applied radially upward. The change in the orbit inclination of the satellite is maintained at zero by operating the two thrustors alternately so that their thrust components, normal to the orbital plane, are symmetrically applied about the nodal crossings. Initial operation of the thrustors was successful. There was no interference with the satellite communications systems and the predicted spacecraft operating potential was verified. Subsequent trials failed due to a defect in the operation of the propellant reservoirs in zero g. A feed line valve is under development to correct this difficulty.

  11. Ion microscopy based on laser-cooled cesium atoms.

    PubMed

    Viteau, M; Reveillard, M; Kime, L; Rasser, B; Sudraud, P; Bruneau, Y; Khalili, G; Pillet, P; Comparat, D; Guerri, I; Fioretti, A; Ciampini, D; Allegrini, M; Fuso, F

    2016-05-01

    We demonstrate a prototype of a Focused Ion Beam machine based on the ionization of a laser-cooled cesium beam and adapted for imaging and modifying different surfaces in the few-tens nanometer range. Efficient atomic ionization is obtained by laser promoting ground-state atoms into a target excited Rydberg state, then field-ionizing them in an electric field gradient. The method allows obtaining ion currents up to 130pA. Comparison with the standard direct photo-ionization of the atomic beam shows, in our conditions, a 40-times larger ion yield. Preliminary imaging results at ion energies in the 1-5keV range are obtained with a resolution around 40nm, in the present version of the prototype. Our ion beam is expected to be extremely monochromatic, with an energy spread of the order of the eV, offering great prospects for lithography, imaging and surface analysis.

  12. Beta-decay measurements of neutron-deficient cesium isotopes

    SciTech Connect

    Parry, R.F.

    1983-03-01

    Beta decay endpoint energy measurements of the neutron deficient cesium isotopes were done using an energy spectrum shape fitting technique. This was a departure from the typical method of endpoint energy analysis, the Fermi-Kurie plot. A discussion of the shape fitting procedure and its improved features are discussed. These beta endpoint measurements have led to total decay energies (Q/sub EC/) of the neutron deficient /sup 119/ /sup 123/Cs isotopes. The total decay energies of /sup 122m/Cs (Q/sub EC/ = 6.95 +- 0.25 MeV) and /sup 119/Cs (Q/sub EC/ = 6.26 +- 0.29 MeV) were new measurements. The total decay energies of /sup 123/Cs (Q/sub EC/ = 4.05 +- 0.18 MeV), /sup 122g/Cs (Q/sub EC/ = 7.05 +- 0.18 MeV), /sup 121/Cs (Q/sub EC/ = 5.21 +- 0.22 MeV), and /sup 120/Cs (Q/sub EC/ = 7.38 +- 0.23 MeV) were measurements with significantly improved uncertainties as compared to the literature. Further, a combination of the energy levels derived from previous literature gamma-gamma coincident measurements and the experimental beta-coincident gamma decay energies has supported an improved level scheme for /sup 121/Xe and the proposal of three new energy levels in /sup 119/Xe. Comparison of the experimental cesium mass excesses (determined with our Q/sub EC/ values and known xenon mass excesses) with both the literature and theoretical predicted values showed general agreement except for /sup 120/Cs. Possible explanations for this deviation are discussed.

  13. Vitrification of cesium-contaminated organic ion exchange resin

    SciTech Connect

    Sargent, Jr., Thomas N.

    1994-08-01

    Vitrification has been declared by the Environmental Protection Agency (USEPA) as the Best Demonstrated Available Technology (BDAT) for the permanent disposal of high-level radioactive waste. Savannah River Site currently uses a sodium tetraphenylborate (NaTPB) precipitation process to remove Cs-137 from a wastewater solution created from the processing of nuclear fuel. This process has several disadvantages such as the formation of a benzene waste stream. It has been proposed to replace the precipitation process with an ion exchange process using a new resorcinol-formaldehyde resin developed by Savannah River Technical Center (SRTC). Preliminary tests, however, showed that problems such as crust formation and a reduced final glass wasteform exist when the resin is placed in the melter environment. The newly developed stirred melter could be capable of overcoming these problems. This research explored the operational feasibility of using the stirred tank melter to vitrify an organic ion exchange resin. Preliminary tests included crucible studies to determine the reducing potential of the resin and the extent of oxygen consuming reactions and oxygen transfer tests to approximate the extent of oxygen transfer into the molten glass using an impeller and a combination of the impeller and an external oxygen transfer system. These preliminary studies were used as a basis for the final test which was using the stirred tank melter to vitrify nonradioactive cesium loaded organic ion exchange resin. Results from this test included a cesium mass balance, a characterization of the semi-volatile organic compounds present in the off gas as products of incomplete combustion (PIC), a qualitative analysis of other volatile metals, and observations relating to the effect the resin had on the final redox state of the glass.

  14. Geochemical dynamics of cesium sorption by selected clay minerals

    SciTech Connect

    Noll, M.R.

    1989-01-01

    This study focuses on the interactions of cesium with selected clay minerals. Cesium is of interest as it is a chief component of high level radioactive waste. Primarily, the thermodynamics and kinetics of Cs exchange reactions were investigated to determine the preference for Cs of a kaolinite, illite, and vermiculite. Thermodynamic studies indicated that Cs was most strongly preferred by Ca saturated clays. Of the three minerals studied, illite proved to be the most effective in adsorbing Cs as indicated by the Vanselow Selectivity Coefficients (k{sub v}). The k{sub v} values for illite ranged from 5.87 to over 10{sup 10}, depending on the mineral and saturating cation. Kinetics experiments proved to be the most interesting. On 2:1 clay minerals (illite and vermiculite), two simultaneous reactions are postulated. The first, and faster of the two reactions, is believed to correspond to Cs adsorption on surface planar sites. The second reaction may be the adsorption of Cs on interlayer and wedge exchange sites. Kaolinite only shows a single reaction since it is a 1:1 clay mineral. Rate coefficients were calculated and the first reaction was found to be on the order of one magnitude greater than the second reaction. The reactions on kaolinite were similar to this faster reaction. Desorption data indicated that the rate of desorption was one or more orders of magnitude less than the corresponding adsorption rate. It is important to note, however, that studies on the effect of temperature indicated that Arrhenius behavior is not followed in many of these experiments. It is postulated that changes in cation radius ratio, or the availability of exchange sites is causing this Anti-Arrhenius behavior. Finally, it is concluded that illite exhibits the greatest preference for the adsorption of Cs.

  15. Estimation of Downstream Cesium Concentrations Following a Postulated PAR Pond Dam Break

    SciTech Connect

    Chen, K.F.

    2002-07-08

    Following a postulated PAR Pond dam break, some of the PAR Pond sediment including the cesium could be eroded and be transported downstream to the Savannah River through the Lower Three Runs Creek. Studies showed that most of the eroded sediment including the cesium would deposit in the Lower Three Runs Creek and the remainder would discharge to the Savannah River from the mouth of Lower Three Runs Creek. A WASP5 model was developed to simulate the eroded sediment and cesium transport from the Lower Three Runs Creek mouth to the Atlantic coast. The dissolved cesium concentrations at the Highway 301 bridge and near the City of Savannah Industrial and Domestic Water Supply Plant are 30 and 27 pCi/l, respectively. The concentrations at both locations are less than the U. S. Environmental Protection Agency drinking water standard of 200 pCi/l.

  16. Cs2 ‘diffuse bands’ emission from superheated cesium vapor

    NASA Astrophysics Data System (ADS)

    Pichler, G.; Makdisi, Y.; Kokaj, J.; Thomas, N.; Mathew, J.; Beuc, R.

    2016-07-01

    Thermal emission from superheated cesium vapor was studied to very high temperatures from 700 °C to 1000 °C. This was performed in the vapor condition only and with no liquid cesium present in the all-sapphire cell. We observed a number of atomic and molecular spectral features simultaneously in emission and absorption, especially peculiar thermal emission of cesium dimer diffuse bands (2 3Πg → a 3∑u + transitions) around 710 nm coexisting with absorption bands around first resonance lines at 852 and 894 nm. We performed appropriate calculations of the diffuse band emission profiles and compared them with measured profiles. We also performed absorption measurements and compared observed diffuse band profiles with calculated ones. Possible applications of the observed phenomena will be discussed in terms of the solar energy conversion using dense cesium vapor.

  17. INTERACTIONS BETWEEN CESIUM AND DISPERSED KAOLINITE POWDERS AT HIGH TEMPERATURES FOR TREATMENT OF MIXED WASTES

    EPA Science Inventory

    Kaolinite sorbents were found to manage emissions of vapor phase cesium, when the kaolinite was injected into the combustor, having maximum value between 1400 and 1500 K. The mechanism of this process and its quantification await further research.

  18. Biological effects of cesium-137 injected in beagle dogs of different ages

    SciTech Connect

    Nikula, K.J.; Muggenburg, B.A.; Griffith, W.C.

    1995-12-01

    The toxicity of cesium-137 ({sup 137}Cs) in the Beagle dog was investigated at the Argonne National Laboratory (ANL) as part of a program to evaluate the biological effects of internally deposited radionuclides. The toxicity and health effects of {sup 137}Cs are important to understand because {sup 137}Cs is produced in large amounts in light-water nuclear reactors. Large quantities of cesium radioisotopes have entered the human food chain as a result of atmospheric nuclear weapons test, and additional cesium radioisotopes were released during the Chernobyl accident. Although the final analyses are not complete, three findings are significant: older dogs dies significantly earlier than juvenile and young adult dogs; greater occurrence of sarcomas in the cesium-137 injected dogs; the major nonneoplastic effect in dogs surviving beyond 52 d appears to be testicular atrophy.

  19. Cesium-diode performances from the 1963-to-1971 Thermionic Conversion Specialist Conferences

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1972-01-01

    Indexes and summaries of the conference papers containing cesium-diode results are presented. Lists of converter materials, geometries, conditions, outputs, and lifetimes accompany the references. Simple chemical designations for emitters, collectors, and additives direct the reader to appropriate selections.

  20. MODELING AN ION EXCHANGE PROCESS FOR CESIUM REMOVAL FROM ALKALINE RADIOACTIVE WASTE SOLUTIONS

    SciTech Connect

    Smith, F; Luther Hamm, L; Sebastian Aleman, S; Johnston Michael, J

    2008-08-26

    The performance of spherical Resorcinol-Formaldehyde ion-exchange resin for the removal of cesium from alkaline radioactive waste solutions has been investigated through computer modeling. Cesium adsorption isotherms were obtained by fitting experimental data using a thermodynamic framework. Results show that ion-exchange is an efficient method for cesium removal from highly alkaline radioactive waste solutions. On average, two 1300 liter columns operating in series are able to treat 690,000 liters of waste with an initial cesium concentration of 0.09 mM in 11 days achieving a decontamination factor of over 50,000. The study also tested the sensitivity of ion-exchange column performance to variations in flow rate, temperature and column dimensions. Modeling results can be used to optimize design of the ion exchange system.

  1. CT brain findings in a patient with elevated brain cesium levels.

    PubMed

    Khangure, Simon R; Williams, Eric S; Welman, Christopher J

    2013-12-01

    We describe the CT findings in the brain of a woman with pathologically proven elevated levels of blood and tissue cesium. The 42-year-old woman had been receiving cesium chloride as a non-mainstream treatment for metastatic breast carcinoma. She presented to hospital following a seizure, and died 48 hours after admission. A brain CT performed on hospital admission showed a diffuse increase in attenuation of brain parenchyma. Autopsy revealed elevated levels of cesium in blood and solid organs including the brain. We hypothesize that the imaging findings are attributable to the abnormally elevated level of brain cesium at the time of the CT scan. To our knowledge, this is the first reported case of this imaging finding.

  2. Prussian blue caged in spongiform adsorbents using diatomite and carbon nanotubes for elimination of cesium.

    PubMed

    Hu, Baiyang; Fugetsu, Bunshi; Yu, Hongwen; Abe, Yoshiteru

    2012-05-30

    We developed a spongiform adsorbent that contains Prussian blue, which showed a high capacity for eliminating cesium. An in situ synthesizing approach was used to synthesize Prussian blue inside diatomite cavities. Highly dispersed carbon nanotubes (CNTs) were used to form CNT networks that coated the diatomite to seal in the Prussian blue particles. These ternary (CNT/diatomite/Prussian-blue) composites were mixed with polyurethane (PU) prepolymers to produce a quaternary (PU/CNT/diatomite/Prussian-blue), spongiform adsorbent with an in situ foaming procedure. Prussian blue was permanently immobilized in the cell walls of the spongiform matrix and preferentially adsorbed cesium with a theoretical capacity of 167 mg/g cesium. Cesium was absorbed primarily by an ion-exchange mechanism, and the absorption was accomplished by self-uptake of radioactive water by the quaternary spongiform adsorbent.

  3. Local variation of soil contamination with radioactive cesium at a farm in Fukushima.

    PubMed

    Sato, Itaru; Natsuhori, Masahiro; Sasaki, Jun; Satoh, Hiroshi; Murata, Takahisa; Nakamura, Tatsuro; Otani, Kumiko; Okada, Keiji

    2016-02-01

    Radioactive cesium concentration in soil was measured at 27 sections with 5 points per section, and surface dose of ground was measured at 10 sections with 13 points per section at a farm in Fukushima to assess local variation of soil contamination with radioactive cesium. As for the cesium in soil, averages of the coefficient of variance (CV) and the maximum/minimum ratio in each section were 49% and 4.9, respectively. As for the surface dose, average of its CV in each section was 20% and the maximum/minimum ratio reached a maximum of 3.0. These findings suggest that exact evaluation of soil contamination with cesium is difficult. Small changes or differences in soil contamination may not be detected in studies of the environmental radioactivity.

  4. Testing Lorentz Invariance with Laser-Cooled Cesium Atomic Frequency Standards

    NASA Technical Reports Server (NTRS)

    Klipstein, William M.

    2004-01-01

    This slide presentation reviews the Lorentz invariance testing during the proposed PARCS experiment. It includes information on the primary atomic reference clock in space (PARCS), cesium, laser cooling, and the vision for the future.

  5. Calculations of neutron and proton radii of cesium isotopes. Final report, April 23--September 30, 1993

    SciTech Connect

    Not Available

    1993-12-31

    This task involved the calculation of neutron and proton radii of cesium isotopes. The author has written a computer code that calculates radii according to two models: Myers 1983 and FRDM 1992. Results of calculations in both these models for both cesium and francium isotopes are attached as figures. He is currently interpreting these results in collaboration with D. Vieira and J.R. Nix, and they expect to use the computer code for further studies of nuclear radii.

  6. Cesium Absorption Spectrum Perturbed by Argon: Observation of Non-Lorentzian Wing Properties

    DTIC Science & Technology

    2012-03-01

    CESIUM ABSORPTION SPECTRUM PERTURBED BY ARGON : OBSERVATION OF NON-LORENTZIAN WING PROPERTIES THESIS Gordon E. Lott, Second Lieutenant, USAF AFIT...PERTURBED BY ARGON : OBSERVATION OF NON-LORENTZIAN WING PROPERTIES THESIS Presented to the Faculty Department of Engineering Physics Graduate School of...PUBLIC RELEASE; DISTRIBUTION UNLIMITED. AFIT / APPLPHY / ENP / 12-MOS CESIUM ABSORPTION SPECTRUM PERTURBED BY ARGON : OBSERVATION OF NON-LORENTZIAN

  7. Interaction of the cesium cation with meso-octamethylcalix[4]pyrrole: Experimental and theoretical study

    NASA Astrophysics Data System (ADS)

    Polášek, Miroslav; Makrlík, Emanuel; Kvíčala, Jaroslav; Křížová, Věra; Petr Vaňura

    2017-02-01

    By using electrospray ionization mass spectrometry (ESI-MS), it was proven experimentally that the univalent cesium cation (Cs+) forms with meso-octamethylcalix[4]pyrrole (abbrev. 1) the cationic complex species 1.Cs+. Further, applying quantum chemical DFT calculations, four different conformations of the resulting complex 1.Cs+ were derived. It means that under the present experimental conditions, this ligand 1 can be considered as a macrocyclic receptor for the cesium cation.

  8. The Effect of Cesium Vapour on the Bulk Conductivity of Plasma - Sprayed Spinel

    DTIC Science & Technology

    2007-11-02

    1995 P. Agnew TOPAZ International Program 901 University Blvd. Albuquerque, NM 87106 USA. 1999021 9 0 4 7 DISTRIBUTION STATEMENT A: Approved for Public...these experiments. References ə> P. Agnew and J.L. Ing, "Surface electrical conductivity of single crystal spinel in cesium vapour", TOPAZ ...International Program report, April 1995. ɚ> P. Agnew and J.L. Ing, "The effect of cesium vapour on the bulk conductivity of plasma- sprayed alumina", TOPAZ

  9. Calculation of fully relativistic cross sections for electron excitation of cesium atom and its application to the diagnostics of hydrogen-cesium plasma

    NASA Astrophysics Data System (ADS)

    Priti; Dipti; Gangwar, R. K.; Srivastava, R.

    2017-01-01

    Electron impact excitation cross-sections and rate coefficients have been calculated using fully relativistic distorted wave theory for several fine-structure transitions from the ground as well as excited states of cesium atom in the wide range of incident electron energy. These processes play dominant role in low pressure hydrogen-cesium plasma, which is relevant to the negative ion based neutral beam injectors for the ITER project. As an application, the calculated detailed cross-sections are used to construct a reliable collisional radiative (CR) model to characterize the hydrogen-cesium plasma. Other processes such as radiative population transfer, electron impact ionization and mutual neutralization of Cs+ ion with negative hydrogen ion along with their reverse processes are also taken into account. The calculated cross-sections and the extracted plasma parameters from the present model are compared with the available experimental and theoretical results.

  10. Synergistically strengthened 3D micro-scavenger cage adsorbent for selective removal of radioactive cesium

    PubMed Central

    Jang, Sung-Chan; Kang, Sung-Min; Haldorai, Yuvaraj; Giribabu, Krishnan; Lee, Go-Woon; Lee, Young-Chul; Hyun, Moon Seop; Han, Young-Kyu; Roh, Changhyun; Huh, Yun Suk

    2016-01-01

    A novel microporous three-dimensional pomegranate-like micro-scavenger cage (P-MSC) composite has been synthesized by immobilization of iron phyllosilicates clay onto a Prussian blue (PB)/alginate matrix and tested for the removal of radioactive cesium from aqueous solution. Experimental results show that the adsorption capacity increases with increasing the inactive cesium concentration from 1 ppm to 30 ppm, which may be attributed to greater number of adsorption sites and further increase in the inactive cesium concentration has no effect. The P-MSC composite exhibit maximum adsorption capacity of 108.06 mg of inactive cesium per gram of adsorbent. The adsorption isotherm is better fitted to the Freundlich model than the Langmuir model. In addition, kinetics studies show that the adsorption process is consistent with a pseudo second-order model. Furthermore, at equilibrium, the composite has an outstanding adsorption capacity of 99.24% for the radioactive cesium from aqueous solution. This may be ascribed to the fact that the AIP clay played a substantial role in protecting PB release from the P-MSC composite by cross-linking with alginate to improve the mechanical stability. Excellent adsorption capacity, easy separation, and good selectivity make the adsorbent suitable for the removal of radioactive cesium from seawater around nuclear plants and/or after nuclear accidents. PMID:27917913

  11. Export of radioactive cesium from agricultural fields under simulated rainfall in Fukushima.

    PubMed

    Thai, Phong K; Suka, Yuma; Sakai, Masaru; Nanko, Kazuki; Yen, Jui-Hung; Watanabe, Hirozumi

    2015-06-01

    In this study, we investigated the impact of rainfall on runoff, soil erosion and consequently on the discharge of radioactive cesium in agricultural fields in Fukushima prefecture using a rainfall simulator. Simulated heavy rainfalls (50 mm h(-1)) generated significant runoff and soil erosion. The average concentration of radioactive cesium (the sum of (134)Cs and (137)Cs) in the runoff sediments was ∼3500 Bq kg(-1) dry soil, more than double the concentrations measured in the field soils which should be considered in studies using the (137)Cs loss to estimate long-term soil erosion. However, the estimated mass of cesium discharged through one runoff event was less than 2% of the cesium inventory in the field. This suggested that cesium discharge via soil erosion is not a significant factor in reducing the radioactivity of contaminated soils in Fukushima prefecture. However, the eroded sediment carrying radioactive cesium will deposit into the river systems and potentially pose a radioactivity risk for aquatic living organisms.

  12. Caustic-Side Solvent Extraction: Prediction of Cesium Extraction for Actual Wastes and Actual Waste Simulants

    SciTech Connect

    Delmau, L.H.; Haverlock, T.J.; Sloop, F.V., Jr.; Moyer, B.A.

    2003-02-01

    This report presents the work that followed the CSSX model development completed in FY2002. The developed cesium and potassium extraction model was based on extraction data obtained from simple aqueous media. It was tested to ensure the validity of the prediction for the cesium extraction from actual waste. Compositions of the actual tank waste were obtained from the Savannah River Site personnel and were used to prepare defined simulants and to predict cesium distribution ratios using the model. It was therefore possible to compare the cesium distribution ratios obtained from the actual waste, the simulant, and the predicted values. It was determined that the predicted values agree with the measured values for the simulants. Predicted values also agreed, with three exceptions, with measured values for the tank wastes. Discrepancies were attributed in part to the uncertainty in the cation/anion balance in the actual waste composition, but likely more so to the uncertainty in the potassium concentration in the waste, given the demonstrated large competing effect of this metal on cesium extraction. It was demonstrated that the upper limit for the potassium concentration in the feed ought to not exceed 0.05 M in order to maintain suitable cesium distribution ratios.

  13. Quantification Of Cesium In Negative Hydrogen Ion Sources By Laser Absorption Spectroscopy

    SciTech Connect

    Fantz, U.; Wimmer, Ch.

    2011-09-26

    The use of cesium in negative hydrogen ion sources and the resulting cesium dynamics caused by the evaporation and redistribution in the vacuum and plasma phase makes a reliable and on-line monitoring of the cesium amount in the source highly desirable. For that purpose, a robust and compact laser absorption setup suitable for the ion source environment has been developed utilizing the Cs D{sub 2} resonance line at 852.1 nm. First measurements are taken in a small laboratory plasma chamber with cesium evaporation. A detection limit of {approx_equal}5x10{sup 13} m{sup -3} at a typical path length of 15 cm has been obtained with a dynamic range of more than three orders of magnitude, limited by line saturation at high densities. For on-line monitoring an automatic data analysis is established achieving a temporal resolution of 100 ms. The setup has then been applied to the ITER prototype ion sources developed at IPP. It is been shown that the method is well suited for routine measurements revealing a new insight into the cesium dynamics during source operation and cesium conditioning.

  14. Modeling Ion-Exchange Processing With Spherical Resins For Cesium Removal

    SciTech Connect

    Hang, T.; Nash, C. A.; Aleman, S. E.

    2012-09-19

    The spherical Resorcinol-Formaldehyde and hypothetical spherical SuperLig(r) 644 ion-exchange resins are evaluated for cesium removal from radioactive waste solutions. Modeling results show that spherical SuperLig(r) 644 reduces column cycling by 50% for high-potassium solutions. Spherical Resorcinol Formaldehyde performs equally well for the lowest-potassium wastes. Less cycling reduces nitric acid usage during resin elution and sodium addition during resin regeneration, therefore, significantly decreasing life-cycle operational costs. A model assessment of the mechanism behind ''cesium bleed'' is also conducted. When a resin bed is eluted, a relatively small amount of cesium remains within resin particles. Cesium can bleed into otherwise decontaminated product in the next loading cycle. The bleed mechanism is shown to be fully isotherm-controlled vs. mass transfer controlled. Knowledge of residual post-elution cesium level and resin isotherm can be utilized to predict rate of cesium bleed in a mostly non-loaded column. Overall, this work demonstrates the versatility of the ion-exchange modeling to study the effects of resin characteristics on processing cycles, rates, and cold chemical consumption. This evaluation justifies further development of a spherical form of the SL644 resin.

  15. Removal of Cesium From Acidic Radioactive Tank Waste Using IONSIV IE-911 (CST)

    SciTech Connect

    Mann, Nicholas Robert; Todd, Terry Allen

    2004-10-01

    IONSIV IE-911, or the engineered form of crystalline silicotitanate (CST), manufactured by UOP Molecular Sieves, has been evaluated for the removal of cesium from Idaho National Engineering and Environmental Laboratory (INEEL) acidic radioactive tank waste. A series of batch contacts and column tests were performed by using three separate batches of CST. Batch contacts were performed to evaluate the concentration effects of nitric acid, sodium, and potassium ions on cesium sorption. Additional batch tests were performed to determine if americium, mercury, and plutonium would sorb onto IONSIV IE-911. An equilibrium isotherm was generated by using a concentrated tank waste simulant. Column tests using a 1.5 cm 3 column and flow rates of 3, 5, 10, 20, and 30 bed volumes (BV)/hr were performed to elucidate dynamic cesium sorption capacities and sorption kinetics. Additional experiments investigated the effect of CST batch and pretreatment on cesium sorption. The thermal stability of IONSIV IE-911 was evaluated by performing thermal gravimetric analysis/differential thermal analysis. Overall, IONSIV IE-911 was shown to be effective for cesium sorption from complex, highly acidic solutions; however, sorbent stability in these solutions may have a deleterious effect on cesium sorption.

  16. Synergistically strengthened 3D micro-scavenger cage adsorbent for selective removal of radioactive cesium

    NASA Astrophysics Data System (ADS)

    Jang, Sung-Chan; Kang, Sung-Min; Haldorai, Yuvaraj; Giribabu, Krishnan; Lee, Go-Woon; Lee, Young-Chul; Hyun, Moon Seop; Han, Young-Kyu; Roh, Changhyun; Huh, Yun Suk

    2016-12-01

    A novel microporous three-dimensional pomegranate-like micro-scavenger cage (P-MSC) composite has been synthesized by immobilization of iron phyllosilicates clay onto a Prussian blue (PB)/alginate matrix and tested for the removal of radioactive cesium from aqueous solution. Experimental results show that the adsorption capacity increases with increasing the inactive cesium concentration from 1 ppm to 30 ppm, which may be attributed to greater number of adsorption sites and further increase in the inactive cesium concentration has no effect. The P-MSC composite exhibit maximum adsorption capacity of 108.06 mg of inactive cesium per gram of adsorbent. The adsorption isotherm is better fitted to the Freundlich model than the Langmuir model. In addition, kinetics studies show that the adsorption process is consistent with a pseudo second-order model. Furthermore, at equilibrium, the composite has an outstanding adsorption capacity of 99.24% for the radioactive cesium from aqueous solution. This may be ascribed to the fact that the AIP clay played a substantial role in protecting PB release from the P-MSC composite by cross-linking with alginate to improve the mechanical stability. Excellent adsorption capacity, easy separation, and good selectivity make the adsorbent suitable for the removal of radioactive cesium from seawater around nuclear plants and/or after nuclear accidents.

  17. The effects of K+ growth conditions on the accumulation of cesium by the bacterium Thermus sp. TibetanG6.

    PubMed

    Wang, Hailei; Kong, Fanjing; Zheng, Mianping

    2006-04-01

    The accumulation of cesium by the bacterium Thermus sp. TibetanG6 was examined under different K+ growth conditions. The effects of external pH and Na+ on the accumulation of cesium were also studied, and the mechanism involved was discussed. K+ regimes played an important role in the accumulation of cesium by the strain TibetanG6. The quantity of cesium accumulated (24 h) was much higher in K+-deficient regime than that in K+-sufficient regime. The pH and Na+ had different effects on the accumulation of cesium in the two K+ regimes. IR spectra analyses indicated that the biosorption is a process of homeostasis with cesium initially accumulated on the cell wall.

  18. Tiotropium Bromide in Chronic Obstructive Pulmonary Disease and Bronchial Asthma.

    PubMed

    Alvarado-Gonzalez, Alcibey; Arce, Isabel

    2015-11-01

    Inhaled bronchodilators are the mainstay of pharmacological treatment for stable chronic obstructive pulmonary disease (COPD), including β2-agonists and muscarinic antagonists. Tiotropium bromide, a long-acting antimuscarinic bronchodilator (LAMA), is a treatment choice for moderate-to-severe COPD; its efficacy and safety have been demonstrated in recent trials. Studies also point to a beneficial role of tiotropium in the treatment of difficult-to-control asthma and a potential function in the asthma-COPD overlap syndrome (ACOS). Combination of different bronchodilator molecules and addition of inhaled corticosteroids are viable therapeutic alternatives. A condensation of the latest trials and the rationale behind these therapies will be presented in this article.

  19. Induced Adsorption of Chloride and Bromide by Submonolayer Amounts of Copper Underpotentially Deposited on Pt(111)

    DTIC Science & Technology

    1994-03-14

    S GD Induced Adsorption Of Chloride And Bromide By Submonolayer Amounts Of Copper Underpotentially Deposited On Pt(111). R. G6mez, J.M. Feliu, and...The underpotential deposition of submonolayer amounts of copper induces an enhanced adsorption of chloride and bromide on Pt(111) and is reflected in...nhinoItO _. •- Induced Adsorption of Chloride and Bromide by Submonolayer Amounts of Copper Underpotentially Deposited on Pt(1 11). R. G6mez1 , J.M

  20. Mixed Iodide-Bromide Methylammonium Lead Perovskite-based Diodes for Light Emission and Photovoltaics.

    PubMed

    Gil-Escrig, Lidón; Miquel-Sempere, Araceli; Sessolo, Michele; Bolink, Henk J

    2015-09-17

    Vacuum deposition techniques are used to prepare mixed iodide-bromide methylammonium lead perovskite diodes via an intermediate double layer of the pure iodide and bromide perovskites. The diodes lead to bright electroluminescence, whose emission spectra maxima shift from the infrared toward the visible with increasing bromide content. When illuminated with AM1.5 simulated sunlight the devices function as efficient solar cells with power conversion efficiencies as high as 12.9%.

  1. Alternate Methods For Eluting Cesium From Spherical Resorcinol-Formaldehyde Resin

    SciTech Connect

    Taylor, Paul Allen; Johnson, Heather Lauren

    2009-01-01

    A Small Column Ion Exchange (SCIX) system has been proposed for removing cesium from the supernate and dissolved salt solutions in the high level waste tanks at the Savannah River Site (SRS). The SCIX system could use either crystalline silicotitanate (CST) an inorganic, non-regenerable sorbent or spherical resorcinol-formaldehyde (RF), a new regenerable resin, to remove cesium from the waste solutions. The standard method for eluting the cesium from the RF resin uses 15-20 bed volumes (BV) of 0.5 M nitric acid (HNO3). The nitric acid eluate, containing the radioactive cesium, would be combined with the sludge from the waste tanks, and would be converted into glass at the Defense Waste Processing Facility (DWPF) at SRS. The amount of nitric acid generated by the standard elution method exceeds the capacity of DWPF to destroy the nitrate ions and maintain the required chemical reducing conditions in the glass melt. Alternate methods for eluting the resin have been tested, including using lower concentrations of nitric acid, other acids, and changing the flow regimes. About 4 bed volumes of 0.5 M nitric acid are required to remove the sodium (titrate the resin) and most of the cesium from the resin, so the bulk of the acid used for the standard elution method removes a very small quantity of cesium from the resin. The resin was loaded with 9.5 g Cs/L of resin prior to elution, which is the maximum expected loading for RF resin treating the actual dissolved salt waste at SRS. For the baseline elution method, 465 g of nitrate is used per liter of resin, and >99.9999% of the cesium is removed from the resin. An alternative method that used 4 bed volumes of 0.5 M HNO3 followed by 11 bed volumes of 0.05 M HNO3, used 158 g of nitrate per liter of resin (66% less nitrate than used for the standard elution) and removed >99.998% of the cesium. A staccato flow mode using 0.5 M HNO3 (1 hr on at 1 BV/hr, followed by 3 hrs off) after the resin had been titrated using a continuous

  2. Comparison of Heat and Bromide as Tracers of Stream Exchanges With Shallow Ground Water

    NASA Astrophysics Data System (ADS)

    Constantz, J.; Cox, M. H.; Su, G. W.

    2002-12-01

    Heat and bromide were compared as tracers for examining stream/groundwater exchanges along the middle reaches of the Santa Clara River, CA, during a 10-hour surface-water sodium bromide injection. Three cross-sections comprised of 6 shallow (1 m) piezometers were installed at the upper, middle, and lower sections of a 17 km long study reach to monitor temperatures and bromide concentrations in the shallow ground water beneath the stream. The heat and ground-water transport simulation model, VS2DH, and a closely related solute and ground-water transport simulation model, VS2DT, were matched up for comparison of simulated and observed temperatures and bromide concentrations in the streambed. Simulated sediment temperature were fitted to observed temperature results to yield apparent streambed hydraulic conductivities in each cross-section. Saturated hydraulic conductivities ranged from 1.39 x 10-5 m/s in the upper reach to 5.56 x 10-4 m/s in the lower reach. The temperature-based hydraulic conductivities were inserted into VS2DT to predict sediment bromide concentrations during the sodium bromide injection. The predicted bromide concentration curves in the sediments yielded an excellent match to the observed bromide concentrations, without adjustment of any model parameters. This indicates that for the spatial and temporal scales examined on the Santa Clara River, the use of heat and bromide as tracers provide comparable information with respect to apparent hydraulic conductivities and water fluxes in near-stream environments.

  3. Transient neuromyopathy after bromide intoxication in a dog with idiopathic epilepsy

    PubMed Central

    2012-01-01

    A seven-year old Australian Shepherd, suffering from idiopathic epilepsy under treatment with phenobarbitone and potassium bromide, was presented with generalised lower motor neuron signs. Electrophysiology and muscle-nerve biopsies revealed a neuromyopathy. The serum bromide concentration was increased more than two-fold above the upper reference value. Clinical signs disappeared after applying diuretics and reducing the potassium bromide dose rate. This is the first case report describing electrophysiological and histopathological findings associated with bromide induced lower motor neuron dysfunction in a dog. PMID:23216950

  4. Solubilities of bromide salts of aluminum, cobalt, lead, manganese, potassium, and sodium when sparged with hydrogen bromide

    SciTech Connect

    Noble, E.G.; Shanks, D.E.

    1988-01-01

    The effects of HBr concentration and temperature on the solubility and hydration state of AlBr/sub 3/, CoBr/sub 2/, PbBr/sub 2/, MnBr/sub 2/, KBr, and NaBr were investigated by the Bureau of Mines. Saturated aqueous solutions of the Al, Pb, K, and Na bromides were sparged with HBr gas at 20/sup 0/, 40/sup 0/, and 60/sup 0/C, and saturated solutions of Co and Mn bromides were sparged at 20/sup 0/C. Increased HBr concentration caused decreased salt solubility because of the common ion effect for all the investigated bromides except PbBr/sub 2/. Aqueous solubilities at 20/sup 0/C were, in percent, 51.7 for AlBr/sub 3/, 53.2 for CoBr/sub 2/, 1.1 for PbBr/sub 2/, 59.6 for MnBr/sub 2/, 39.5 for KBr, and 47.4 for Na Br. At 60/sup 0/C,the solubilities were, in percent, 53.3 for AlBr/sub 3/, 2.2 for PbBr/sub 2/, 46.0 for KBr, and 53.8 for NaBr. Solubilities in solutions sparged to HBr saturation at 20/sup 0/C were, in percent, 0.5 for AlBr/sub 3/, 42.0 for CoBr/sub 2/, 32.2 for Br/sub 2/, 21.0 for MnBr/sub 2/, 0.6 for KBr, and 0.3 for NaBr. At 60/sup 0/C, the solubilities at HBr saturation were, in percent, 1.8 for AlBr/sub 3/, 41.4 for PbBr/sub 2/, 1.3 for KBr, and 0.4 for NaBr. CoBr/sub 2/ precipitated out to a minimum solubility of 27.2 pct at 28.7-pct-HBr concentration. Further increases in HBr concentration increased CoBr/sub 2/ solubility because of the formation of bromide complexes. PbBr/sub 2/ increased in solubility as HBr concentration increased.

  5. The in vitro and in vivo profile of aclidinium bromide in comparison with glycopyrronium bromide.

    PubMed

    Gavaldà, Amadeu; Ramos, Israel; Carcasona, Carla; Calama, Elena; Otal, Raquel; Montero, José Luis; Sentellas, Sonia; Aparici, Monica; Vilella, Dolors; Alberti, Joan; Beleta, Jorge; Miralpeix, Montserrat

    2014-08-01

    This study characterised the in vitro and in vivo profiles of two novel long-acting muscarinic antagonists, aclidinium bromide and glycopyrronium bromide, using tiotropium bromide and ipratropium bromide as comparators. All four antagonists had high affinity for the five muscarinic receptor sub-types (M1-M5); aclidinium had comparable affinity to tiotropium but higher affinity than glycopyrronium and ipratropium for all receptors. Glycopyrronium dissociated faster from recombinant M3 receptors than aclidinium and tiotropium but more slowly than ipratropium; all four compounds dissociated more rapidly from M2 receptors than from M3 receptors. In vitro, aclidinium, glycopyrronium and tiotropium had a long duration of action at native M3 receptors (>8 h versus 42 min for ipratropium). In vivo, all compounds were equi-potent at reversing acetylcholine-induced bronchoconstriction. Aclidinium, glycopyrronium and ipratropium had a faster onset of bronchodilator action than tiotropium. Aclidinium had a longer duration of action than glycopyronnium (time to 50% recovery of effect [t½ offset] = 29 h and 13 h, respectively); these compare with a t½ offset of 64 h and 8 h for tiotropium and ipratropium, respectively. Aclidinium was less potent than glycopyrronium and tiotropium at inhibiting salivation in conscious rats (dose required to produce half-maximal effect [ED50] = 38, 0.74 and 0.88 μg/kg, respectively) and was more rapidly hydrolysed in rat, guinea pig and human plasma compared with glycopyrronium or tiotropium. These results indicate that while aclidinium and glycopyrronium are both potent antagonists at muscarinic receptors with similar kinetic selectivity for M3 receptors versus M2, aclidinium has a longer dissociation half-life at M3 receptors and a longer duration of bronchodilator action in vivo than glycopyrronium. The rapid plasma hydrolysis of aclidinium, coupled to its kinetic selectivity, may confer a reduced propensity for systemic

  6. Bromoform formation in ozonated groundwater containing bromide and humic substances

    SciTech Connect

    Cooper, W.J.; Amy, G.L.; Moore, C.A.; Zika, R.G.

    1986-01-01

    The effect of bromide ion, organic carbon concentration (natural aquatic humic substances), pH, and solar irradiation on the formation of bromoform in ozonated groundwater has been studied. The studies were conducted on four unique samples of groundwater taken from different regions of the Biscayne Aquifer in southern Florida. All other conditions being equal, increases in bromide ion concentrations resulted in increases in CHBr/sub 3/ formation. In three of the four samples, CHBr/sub 3/ formation decreased as the pH level increased from 5 to 9. The fourth sample exhibited an opposite trend whereby the CHBr/sub 3/ concentration increased with increasing pH. Bromoform concentration increased with increased O/sub 3/ concentration over an ozone dosage range of 3.4 to 6.7 mg/L. Ozonated samples placed in sunlight immediately after ozone addition showed a decrease in the formation of CHBr/sub 3/ presumably due to the photodecomposition of HOBr/OBr.

  7. A drinking water utility's perspective on bromide, bromate, and ozonation.

    PubMed

    Bonacquisti, Thomas P

    2006-04-17

    Application of ozone in drinking water treatment plants in the US is growing because of ozone's multiple benefits. Ozone functions as a powerful oxidizing agent and disinfecting agent, it improves finished water quality by reducing turbidity, it reduces the formation of many halogenated disinfection by-products, and it is capable of treating chlorine resistant organisms like cryptosporidia. However, when bromide ion is present, e.g. from the geology, runoff, or sea water intrusion, ozone will convert some of the bromide to bromate depending upon the treatment reaction conditions. Bromate can also be introduced into drinking water as a contaminant in the chlorine used for disinfection. The current maximum contaminant level (MCL) in the USA is 0.010 mg/L, and the maximum contaminant level goal (MCLG) is zero, because of the possibility that bromate may function as a genotoxic carcinogen. The level of the MCL, especially if it is lowered, will significantly impact the ability of many water suppliers to utilize ozone in their water treatment processes and also raise the costs of those applications.

  8. Octahedral Rotation Preferences in Perovskite Iodides and Bromides.

    PubMed

    Young, Joshua; Rondinelli, James M

    2016-03-03

    Phase transitions in ABX3 perovskites are often accompanied by rigid rotations of the corner-connected BX6 octahedral network. Although the mechanisms for the preferred rotation patterns of perovskite oxides are fairly well recognized, the same cannot be said of halide variants (i.e., X = Cl, Br, or I), several of which undergo an unusual displacive transition to a tetragonal phase exhibiting in-phase rotations about one axis (a(0)a(0)c(+) in Glazer notation). To discern the chemical factors stabilizing this unique phase, we investigated a series of 12 perovskite bromides and iodides using density functional theory calculations and compared them with similar oxides. We find that in-phase tilting provides a better arrangement of the larger bromide and iodide anions, which minimizes the electrostatic interactions, improves the bond valence of the A-site cations, and enhances the covalency between the A-site metal and Br(-) or I(-) ions. The opposite effect is present in the oxides, with out-of-phase tilting maximizing these factors.

  9. Deswelling kinetics of polyacrylate gels in solutions of cetyltrimethylammonium bromide.

    PubMed

    Nilsson, Peter; Hansson, Per

    2007-08-23

    The deswelling kinetics of single sodium polyacrylate gel beads (radius 40-160 microm) in aqueous solutions of cetyltrimethylammonium bromide under conditions of forced convection are investigated using micromanipulator assisted light microscopy. The purpose of the study is to further evaluate a previously published model (J. Phys. Chem. B 2003, 107, 9203) using a higher homolog surfactant. For gels with expected fast deswelling (small gel size/low surfactant concentration) and/or in low electrolyte concentration, the model is found to correctly predict the deswelling characteristics of the gel beads. However, for some gels with expected slow deswelling, especially in high electrolyte concentration (10 mM NaBr), the model widely underestimates the required deswelling time. The reason for this is argued to be the longer time frame and high bromide concentration allowing the formation of a denser, more ordered structure in the surface phase, which resists the deformation and reorganization of material necessary for deswelling. Unexpectedly long lag times before the start of deswelling are also found for gels in low surfactant concentration, indicating that a relatively high surfactant concentration in the gel, greatly exceeding the critical aggregation concentration, is needed to start formation of a collapsed surface phase. This critical surfactant concentration is found to be dependent on initial gel radius, as small gels require a relatively higher concentration to initiate collapse.

  10. Biogeochemistry of Cesium in a Sagebrush Steppe Ecosystem

    NASA Astrophysics Data System (ADS)

    Palmer, C. D.; Hess, J. R.; Hamilton, M. A.; Cook, L. L.; Siegel, L. S.; Yancey, N. A.

    2002-12-01

    The nature of radiocesium sources is such that they often have resulted in the contamination of shallow (< 1m), vegetated soils. This surface and near-surface soil contamination by radiocesium may be susceptible to migration on vegetated sites due to plant facilitated 137Cs translocation. Once in the plant, the 137Cs will not only reposition within the soil profile, but grazing and predation can move it through the food chain and range fires can further disperse it throughout the environment. We have been studying the biogeochemistry of cesium in a sagebrush ecosystem at the Idaho National Engineering and Environmental Laboratory in southeastern Idaho. This ecosystem is dominated by crested wheatgrass, rabbitbrush, and sagebrush. Field measurements at the Central Facilities Area indicate that approximately 94% of plant mass radiocesium is associated with crested wheatgrass. Under conditions of senescence, the crested wheatgrass root-to-soil and shoot-to-root ratios (transfer factors) are different for 137Cs and stable Cs (133Cs). These differences are partially attributed to the differences in the binding mechanisms of 137Cs and 133Cs in the soil. Field measurements in the vicinity of the former SL-1 reactor show changes in concentrations and transfer factors with the stage of plant growth. The samples included both rhizosphere and bulk soils as well as roots and shoots from the crested wheatgrass. The ranges of total cesium in rhizosphere and bulk soils are similar, are fairly narrow (1.7 to 5.2 mg kg-1), and do not appear to vary seasonally. In contrast, 137Cs activities in rhizosphere and bulk soils are significantly different, vary over orders of magnitude (10-180 pCi g-1), and show seasonal differences. Shoot and root 137Cs activities decrease between April and May. Total Cs shoot-to-root ratios are greater than the corresponding ratios for radiocesium. Total Cs root-to-rhizosphere soil ratios are lower than the corresponding ratios for 137Cs. These results

  11. Engineered Materials for Cesium and Strontium Storage Final Technical Report

    SciTech Connect

    Sean M. McDeavitt

    2010-04-14

    Closing the nuclear fuel cycle requires reprocessing spent fuel to recover the long-lived components that still have useful energy content while immobilizing the remnant waste fission products in stable forms. At the genesis of this project, next generation spent fuel reprocessing methods were being developed as part of the U.S. Department of Energy's Advanced Fuel Cycle Initiative. One of these processes was focused on solvent extraction schemes to isolate cesium (Cs) and strontium (Sr) from spent nuclear fuel. Isolating these isotopes for short-term decay storage eases the design requirements for long-term repository disposal; a significant amount of the radiation and decay heat in fission product waste comes from Cs-137 and Sr-90. For the purposes of this project, the Fission Product Extraction (FPEX) process is being considered to be the baseline extraction method. The objective of this project was to evaluate the nature and behavior of candidate materials for cesium and strontium immobilization; this will include assessments with minor additions of yttrium, barium, and rubidium in these materials. More specifically, the proposed research achieved the following objectives (as stated in the original proposal): (1) Synthesize simulated storage ceramics for Cs and Sr using an existing labscale steam reformer at Purdue University. The simulated storage materials will include aluminosilicates, zirconates and other stable ceramics with the potential for high Cs and Sr loading. (2) Characterize the immobilization performance, phase structure, thermal properties and stability of the simulated storage ceramics. The ceramic products will be stable oxide powders and will be characterized to quantify their leach resistance, phase structure, and thermophysical properties. The research progressed in two stages. First, a steam reforming process was used to generate candidate Cs/Sr storage materials for characterization. This portion of the research was carried out at Purdue

  12. Cesium Ion Exchange Loading Kinetics Testing with SRF Resin

    SciTech Connect

    Russell, Renee L.; Rinehart, Donald E.; Brown, Garrett N.; Peterson, Reid A.

    2012-11-02

    Ion exchange using the Spherical Resorcinol-Formaldehyde (SRF) resin has been selected by the U.S. Department of Energy’s Office of River Protection for use in the Pretreatment Facility of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and for potential application in an at-tank deployment for removing 137Cs. Recent proposed changes to the WTP ion exchange process baseline indicate that loading may include a broader range of sodium molarities (2 to 8 M) due to caustic leaching and higher temperatures (50°C) to alleviate post-filtration precipitation issues prior to reaching the ion exchange columns. Therefore, it is important to understand the behavior of SRF resin performance under the conditions expected with the new equipment and process changes. This research examined the impact of linear load velocity (4, 6, 8 cm/min), initial sodium concentration (2, 5, 8 M), initial sodium-to-cesium ratio (1.4E+05, 2.1E+05, 2.8E+05 mol/mol), initial sodium-to-hydroxide ratio (2.0, 3.0, 4.0 mol/mol), and resin degradation during extended solution flow using elevated temperature (45°, 50°, 55°, 60°, 65°, 75°C). Testing was performed using a~2mL column packed with SRF resin with feed flowing through it in an up-flow pattern. Samples were taken at set intervals and the data analyzed to help understand the impact of these conditions on the SRF resin performance. It was found that the loading kinetics were not significantly impacted by the sodium concentration over the range tested. However, the loading kinetics were impacted by the linear load velocity. These results indicated that at the test temperature, the adsorption of cesium is strongly dependent on mass transfer through the film and not significantly impacted by interparticle diffusion. Testing for extended times at elevated temperatures showed that the resin does degrade and loading capacity is reduced at and above 45°C. Above 60°C the resin appears to not load at all.

  13. Low-Light-Shift Cesium Fountain without Mechanical Shutters

    NASA Technical Reports Server (NTRS)

    Enzer, Daphna

    2008-01-01

    A new technique for reducing errors in a laser-cooled cesium fountain frequency standard provides for strong suppression of the light shift without need for mechanical shutters. Because mechanical shutters are typically susceptible to failure after operating times of the order of months, the elimination of mechanical shutters could contribute significantly to the reliability of frequency standards that are required to function continuously for longer time intervals. With respect to the operation of an atomic-fountain frequency standard, the term "light shift" denotes an undesired relative shift in the two energy levels of the atoms (in this case, cesium atoms) in the atomic fountain during interrogation by microwaves. The shift in energy levels translates to a frequency shift that reduces the precision and possibly accuracy of the frequency standard. For reasons too complex to describe within the space available for this article, the light shift is caused by any laser light that reaches the atoms during the microwave- interrogation period, but is strongest for near-resonance light. In the absence of any mitigating design feature, the light shift, expressed as a fraction of the standard fs frequency, could be as large as approx. 2 x 10(exp -11), the largest error in the standard. In a typical prior design, to suppress light shift, the intensity of laser light is reduced during the interrogation period by using a single-pass acoustooptic modulator to deflect the majority of light away from the main optical path. Mechanical shutters are used to block the remaining undeflected light to ensure complete attenuation. Without shutters, this remaining undeflected light could cause a light shift of as much as .10.15, which is unacceptably large in some applications. The new technique implemented here involves additionally shifting the laser wavelength off resonance by a relatively large amount (typically of the order of nanometers) during microwave interrogation. In this

  14. Gamma-ray spectroscopic determination of iodine-131 and cesium-137 in foods: Two collaborative studies

    SciTech Connect

    Baratta, E.J.; Easterly, D.G. )

    1989-07-01

    The AOAC method for iodine-131, cesium-137, and barium-140 in milk by gamma-ray spectroscopy (48.025-48.029) was extended to include other foods for the radionuclides iodine-131 and cesium-137. Two collaborative studies were performed to validate this extension. In the first study, a food sample containing 119 pCi {sup 131}I/kg and 53 pCi {sup 137}Cs/kg was sent to each of 45 laboratories for triplicate analyses. For 25 responses, the mean of the reported values was 123.8 pCi/kg for iodine-131, and for 27 responses, the mean was 53.4 pCi/kg for cesium-137. Repeatability (within-laboratory) standard deviations (Sr) for iodine-131 and cesium-137 were 4.6 and 3.7 pCi/kg, respectively. Reproducibility (among-laboratories) standard deviations (SR) for iodine-131 and cesium-137 were 12.1 and 6.0 pCi/kg, respectively. In the second study, a food sample containing 25 pCi {sup 131}I/kg and 27 pCi {sup 137}Cs/kg was sent to each of 54 laboratories for triplicate analyses. For 21 responses, the mean of the reported values was 25.0 pCi/kg for iodine-131, and for 19 responses, the mean was 28.9 pCi/kg for cesium-137. Sr Values were 4.0 and 1.6 pCi/kg for iodine-131 and cesium-137, respectively, and SR values were 5.0 and 2.8 pCi/kg, respectively. The method extension was adopted official first action.

  15. Efficiency of aluminum-pillared montmorillonite on the removal of cesium and copper from aqueous solutions.

    PubMed

    Karamanis, D; Assimakopoulos, P A

    2007-05-01

    Aluminum-pillared-layered montmorillonites (PILMs) were tested for their potential application in the removal of copper or cesium from aqueous solutions. By varying the initial conditions, several PILMs were prepared and characterized by means of X-ray fluorescence (XRF), proton induced gamma-ray emission (PIGE), X-ray diffraction (XRD) and sorption isotherms. Uptake of metals was studied by means of XRF spectrometry for copper sorption or gamma-ray spectrometry for cesium, using 137Cs as radiotracer. The sorption kinetics and capacity of PILMs were determined in relation to the effects of factors such as the initial metal concentration, initial pH of the solution and the presence of competitive cations. Kinetic studies showed that an equilibrium time of few minutes was needed for the adsorption of metal ions on PILMs. A pseudo-first-order equation was used to describe the sorption process for either copper or cesium. The most effective pH range for the removal of copper and cesium was found to be 4.0-6.0 and 3.0-8.0, respectively. Cesium sorption isotherms were best represented by a two-site Langmuir model while copper isotherms followed the Freundlich or the two-site Langmuir model. Cesium sorption experiments with inorganic or organic competitive cations as blocking agents revealed that the high selective sites of PILMs for cesium sorption (1-2% of total) are surface and edge sites in addition to interlayer exchange sites. In copper sorption, the two sites were determined as interlayer sites of PILMs after restoring their cation exchange capacity and sites associated with the pillar oxides.

  16. Validation of an automated fluorescein method for determining bromide in water

    USGS Publications Warehouse

    Fishman, M. J.; Schroder, L.J.; Friedman, L.C.

    1985-01-01

    Surface, atmospheric precipitation and deionized water samples were spiked with ??g l-1 concentrations of bromide, and the solutions stored in polyethylene and polytetrafluoroethylene bottles. Bromide was determined periodically for 30 days. Automated fluorescein and ion chromatography methods were used to determine bromide in these prepared samples. Analysis of the data by the paired t-test indicates that the two methods are not significantly different at a probability of 95% for samples containing from 0.015 to 0.5 mg l-1 of bromide. The correlation coefficient for the same sets of paired data is 0.9987. Recovery data, except for the surface water samples to which 0.005 mg l-1 of bromide was added, range from 89 to 112%. There appears to be no loss of bromide from solution in either type of container.Surface, atmospheric precipitation and deionized water samples were spiked with mu g l** minus **1 concentrations of bromide, and the solutions stored in polyethylene and polytetrafluoroethylene bottles. Bromide was determined periodically for 30 days. Automated fluorescein and ion chromatography methods were used to determine bromide in these prepared samples. Analysis of the data by the paired t-test indicates that the two methods are not significantly different at a probability of 95% for samples containing from 0. 015 to 0. 5 mg l** minus **1 of bromide. The correlation coefficient for the same sets of paired data is 0. 9987. Recovery data, except for the surface water samples to which 0. 005 mg l** minus **1 of bromide was added, range from 89 to 112%. Refs.

  17. Optical and Rheological Properties of a Semi-Diluted Equimolar Solution of Cetyltrimethylammonium Bromide and Potassium Bromide

    NASA Astrophysics Data System (ADS)

    Decruppe, J. P.; Cappelaere, E.; Cressely, R.

    1997-02-01

    We report in this paper the results of rheological and optical experiments performed on a semi-diluted viscoelastic solution of cetyltrimethylammonium bromide (CTAB) in water with sodium bromide at a concentration of 0.3 M l^{-1} in surfactant and salt. This concentration in surfactant is much smaller than the concentration which gives a nematic phase at rest. The solution behaves like a Maxwell fluid with a single relaxation time. When submitted to a shear flow, this solution shows a behaviour typical of a system undergoing a phase transition. When observed between crossed polarizer and analyzer, the gap of the Couette cell appears divided in two bands the optical properties of which are different; in rheology, the curves σ(dot{γ}) are also characteristic of these systems where the shear stress presents a plateau extending between two critical values, dot{γ}_{1c}, and dot{γ}_{2c} of the shear rate. We finally compare the results with previous experiments performed on a concentrated solution of CTAB containing no salt.

  18. Final storage of radioactive cesium by pollucite hydrothermal synthesis

    PubMed Central

    Yokomori, Yoshinobu; Asazuki, Kazuhito; Kamiya, Natsumi; Yano, Yudai; Akamatsu, Koki; Toda, Tetsuya; Aruga, Atsushi; Kaneo, Yoshiaki; Matsuoka, Seiko; Nishi, Koji; Matsumoto, Satoshi

    2014-01-01

    The Fukushima nuclear accident has highlighted the importance of finding a better final storage method for radioactive cesium species. Cs is highly soluble in water, and can easily exchange with other alkali ions in zeolites or clays to form stable complexes. However, Cs+ is released from Cs+ complexes into water when surrounded by an excess of water. Pollucite may be the best final storage option for Cs+, but its typical synthesis requires heating to about 1200°C in air. Here, we show that the hydrothermal synthesis of pollucite can be completed at 300°C in three hours from any zeolite or clay. Furthermore, our procedure does not require ion exchange before synthesis. Radioactive Cs is usually found in complexes with clays. At that time, this method only requires calcium hydroxide, water, and three hours of hydrothermal synthesis, so the process is both inexpensive and practical for large-scale application. Pollucite is an analog of analcime zeolite, and contains a channel system 2.8 Å in diameter, which is formed by 6-oxygen rings. As the diameter of Cs+ is 3.34 Å and each Cs+ exists independently within a separate portion of the channel, Cs+ cannot exit the pollucite framework without breaking it. PMID:24569302

  19. Evaluation of a cesium adsorbent grafted with ammonium 12-molybdophosphate

    NASA Astrophysics Data System (ADS)

    Shibata, Takuya; Seko, Noriaki; Amada, Haruyo; Kasai, Noboru; Saiki, Seiichi; Hoshina, Hiroyuki; Ueki, Yuji

    2016-02-01

    A fibrous cesium (Cs) adsorbent was developed using radiation-induced graft polymerization with a cross-linked structure containing a highly stable adsorption ligand. The ligand, ammonium 12-molybdophosphate (AMP), was successfully introduced onto the fibrous polyethylene trunk material. The resulting Cs adsorbent contained 36% nonwoven fabric polyethylene (NFPE), 1% AMP, 2% triallyl isocyanurate (TAIC) and 61% glycidyl methacrylate (GMA). The adsorbent's Cs adsorption capacity was evaluated using batch and column tests. It was determined that the adsorbent could be used in a wide pH range. The amount of desorbed molybdenum, which can be used as an estimate for AMP stability on the Cs adsorbent, was minimized at the standard drinking water pH range of 5.8-8.6. Based from the inspection on the adherence of these results to the requirements set forth by the Food Sanitation Act by a third party organization, it can be concluded that the developed Cs adsorbent can be safely utilized for drinking water.

  20. Production of complex rubidium and cesium hydrogen sulfate‒phosphates

    NASA Astrophysics Data System (ADS)

    Komornikov, V. A.; Grebenev, V. V.; Makarova, I. P.; Selezneva, E. V.; Andreev, P. V.

    2016-07-01

    The solubility in the CsH2PO4‒CsHSO4‒H2O system at different temperatures (25, 50, and 75°C) is studied and the phase equilibria in the Rb3H(SO4)2‒RbH2PO4‒H2O system under isothermal conditions (at 25°C) are analyzed. The temperature and concentration conditions for forming Rb2(HSO4)(H2PO4), Rb4(HSO4)3(H2PO4), Cs4(HSO4)3(H2PO4), Cs3(HSO4)2(H2PO4), Cs2(HSO4)(H2PO4), and Cs6H(HSO4)3(H2PO4)4 compounds (the latter has been obtained for the first time) are determined. The conditions for growing large single crystals of complex acid rubidium and cesium salts are found.

  1. Desorption of cesium from granite under various aqueous conditions.

    PubMed

    Wang, Tsing-Hai; Li, Ming-Hsu; Wei, Yuan-Yaw; Teng, Shi-Ping

    2010-12-01

    In this work the desorption of cesium ions from crushed granite in synthetic groundwater (GW) and seawater (SW) was investigated. Results were compared with those obtained in deionized water (DW) and in two kinds of extraction solutions, namely: MgCl(2) and NaOAc (sodium acetate). In general, the desorption rate of Cs from crushed granite increased proportionally with initial Cs loadings. Also, amounts of desorbed Cs ions followed the tendency in the order SW>GW>NaOAc approximately equal MgCl(2)>DW solutions. This indicated that the utilization of extraction reagents for ion exchange will underestimate the Cs desorption behavior. Fitting these experimental data by Langmuir model showed that these extraction reagents have reduced Cs uptake by more than 90%, while only less than 1% of adsorbed Cs ions are still observed in GW and SW solutions in comparison to those in DW. Further SEM/EDS mapping studies clearly demonstrate that these remaining adsorbed Cs ions are at the fracture areas of biotite.

  2. Chromatic instabilities in cesium-doped tungsten bronze nanoparticles

    NASA Astrophysics Data System (ADS)

    Adachi, Kenji; Ota, Yosuke; Tanaka, Hiroyuki; Okada, Mika; Oshimura, Nobumitsu; Tofuku, Atsushi

    2013-11-01

    Nanoparticles of alkali-doped tungsten bronzes are an excellent near-infrared shielding material, but exhibit slight chromatic instabilities typically upon applications of strong ultra-violet light or heating in humid environment, which acts detrimentally to long-life commercial applications. Origin of the chromatic instabilities in cesium-doped tungsten bronze has been investigated, and it has been found that the coloration and bleaching processes comprised electronic exchanges which accelerate or depress the polaron excitation and the localized surface plasmon resonance. Coloration on UV illumination is evidenced by electron diffraction as due to the formation of HxWO3, which is considered to take place in the surface Cs-deficient WO3 region via the double charge injection mechanism. On the other hand, bleaching on heating in air and in humid environment is shown to accompany the extraction of Cs and electrons from Cs0.33WO3 by X-ray photoelectron spectroscopy and X-ray diffraction analysis and is concluded to be an oxidation of Cs0.33WO3 on the particle surface.

  3. Chromatic instabilities in cesium-doped tungsten bronze nanoparticles

    SciTech Connect

    Adachi, Kenji Ota, Yosuke; Tanaka, Hiroyuki; Okada, Mika; Oshimura, Nobumitsu; Tofuku, Atsushi

    2013-11-21

    Nanoparticles of alkali-doped tungsten bronzes are an excellent near-infrared shielding material, but exhibit slight chromatic instabilities typically upon applications of strong ultra-violet light or heating in humid environment, which acts detrimentally to long-life commercial applications. Origin of the chromatic instabilities in cesium-doped tungsten bronze has been investigated, and it has been found that the coloration and bleaching processes comprised electronic exchanges which accelerate or depress the polaron excitation and the localized surface plasmon resonance. Coloration on UV illumination is evidenced by electron diffraction as due to the formation of H{sub x}WO{sub 3}, which is considered to take place in the surface Cs-deficient WO{sub 3} region via the double charge injection mechanism. On the other hand, bleaching on heating in air and in humid environment is shown to accompany the extraction of Cs and electrons from Cs{sub 0.33}WO{sub 3} by X-ray photoelectron spectroscopy and X-ray diffraction analysis and is concluded to be an oxidation of Cs{sub 0.33}WO{sub 3} on the particle surface.

  4. Hanford Isotope Project strategic business analysis Cesium-137 (Cs-137)

    SciTech Connect

    1995-10-01

    The purpose of this business analysis is to address the beneficial reuse of Cesium 137 (Cs-137) in order to utilize a valuable national asset and possibly save millions of tax dollars. Food irradiation is the front runner application along with other uses. This business analysis supports the objectives of the Department of Energy National Isotope Strategy distributed in August 1994 which describes the DOE plans for the production and distribution of isotope products and services. As part of the Department`s mission as stated in that document. ``The Department of Energy will also continue to produce and distribute other radioisotopes and enriched stable isotopes for medical diagnostics and therapeutics, industrial, agricultural, and other useful applications on a businesslike basis. This is consistent with the goals and objectives of the National Performance Review. The Department will endeavor to look at opportunities for private sector to co-fund or invest in new ventures. Also, the Department will seek to divest from ventures that can more profitably or reliably be operated by the private sector.``

  5. A cesium TELEC experiment at Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Britt, E. J.

    1979-01-01

    The thermoelectronic laser energy converter (TELEC), was studied as a method of converting a 10.6 mm CO2 laser beam into electric power. The calculated characteristics of a TELEC seem to be well matched to the requirements of a spacecraft laser energy conversion system. The TELEC is a high power density plasma device which absorbs an intense laser beam by inverse bremsstrahlung with the plasma electrons. In the TELEC process, electromagnetic radiation is absorbed directly in the plasma electrons producing a high electron temperature. The energetic electrons diffuse out of the plasma striking two electrodes which are in contact with the plasma at the boundaries. These two electrodes have different areas: the larger one is designated as the collector, the smaller one is designated as the emitter. The smaller electrode functions as an electron emitter to provide continuity of the current. Waste heat is rejected from the collector electrode. An experiment was carried out with a high power laser using a cesium vapor TELEC cell with 30 cm active length. Laser supported plasma was produced in the TELEC device during a number of laser runs over a period of several days. Electric power from the TELEC was observed with currents in the range of several amperes and output potentials of less than 1 volt. The magnitudes of these electric outputs were smaller than anticipated but consistent with the power levels of the laser during this experiment.

  6. The crystal structures of potassium and cesium trivanadates

    USGS Publications Warehouse

    Evans, H.T.; Block, S.

    1966-01-01

    Potassium and cesium trivanadates are monoclinic and isomorphous, space group P21/m, with the following dimensions (Z = 2): KV3O8, a = 7.640 A, b = 8.380 A, c = 4.979 A, ??= 96?? 57???; CsV3O8, a = 8.176 A, b = 8.519 A, c = 4.988 A, ?? = 95?? 32???. The crystal structure of KV3O8 has been determined from hk0, 0kl, and h0l Weissenberg data with an R factor of 0.15. The structure of CsV3O8 has been refined with 1273 hkl Weissenberg data to an R factor of 0.089. The structures consist of corrugated sheets based on a linkage of distorted VO6, octahedra. Two of the vanadium atoms lie in double, square-pyramid groups V2O8, which are linked through opposite basal corners into chains along the b axis. The chains are joined laterally along the c axis into sheets by the third vanadium atom in VO groups, also forming part of a square-pyramid coordination. Various aspects of these structures are compared with other known oxovanadate structures.

  7. Budget of Methyl Bromide in the Atmosphere: Isotopic Constraints

    NASA Astrophysics Data System (ADS)

    Bill, M.; Miller, L. G.; Rhew, R. C.; Goldstein, A. H.

    2001-12-01

    Bromine radicals contribute significantly to stratospheric ozone loss through coupled reactions with ClO, HO2, and NO2 radicals. Bromine is approximately 40-100 times more effective, atom for atom, at destroying ozone than chlorine. For instance, Br coupled reactions are responsible for 30 to 50% of the total ozone loss in the polar vortex. The largest source of bromine to the stratosphere is methyl bromide (CH3Br). CH3Br has a concentration in the troposphere of about 10 pptv, a total estimated lifetime of 0.6 to 0.9 years, and has the highest concentration of any long lived organobromine. Unlike chlorofluorocarbons, which are produced entirely by humans, methyl bromide is produced by both anthropogenic and natural processes. We are developing the use of stable isotopes to constrain the budget of CH3Br through quantification of the source signatures and the isotopic fractionations associated with sinks. The largest natural sources appear to be biological production in oceans ( ~35%), biomass burning ( ~13%), and salt marshes ( ~10%). Thus far, the only natural emissions to be isotopically characterized is from salt marsh plants. Carbon isotopic ratios of CH3Br emitted from the salt marsh have a strong diurnal variation from -65\\permil during daytime when emission rates are highest to -12\\permil at night when emissions are ~13% of the daytime rates. The \\delta13C weighted mean of salt marsh emission is -43\\permil CH3Br. Anthropogenically produced CH3Br is used for fumigation of soils, harvested crops and structures, and represents approximately 30% of the total source flux. The fumigation of harvested crops and structures constitutes approximately one third of the anthropogenic source to the atmosphere and, because the release rate of applied CH3Br approaches 100%, it should have a mean isotopic composition equal to industrially manufactured CH3Br, -54.4\\permil. However during soil fumigation, some of the CH3Br is consumed insitu causing isotopic fractionation

  8. The first barium tin(II) bromide fluoride

    NASA Astrophysics Data System (ADS)

    Dénès, Georges; Merazig, Hocine; Muntasar, Abdualhafeed; Porterfield, Robyn

    2014-04-01

    In an effort to prepare barium tin(II) bromide fluorides for the first time, possibly similar to the chloride fluorides obtained earlier in our laboratory, precipitation reactions were carried out by mixing aqueous solutions of SnF2 and of BaBr2.2H2O. In contrast with the chloride fluoride system, a single powdered phase was obtained throughout the SnF2 - BaBr2 system, with the yield being maximum at X ≈ 0.25, where X is the molar fraction of barium bromide in the reaction mixture. Phase identification with the JCPDS database failed to produce a match, confirming that a new phase had been produced. The exact chemical composition of the new compound has not been obtained yet. Based on the X value for the maximum yield, the Sn/Ba ratio is likely to be 3/1 or 2/1. The Mössbauer spectrum at ambient conditions shows that bonding to tin(II) is covalent, therefore with the tin lone pair being stereoactive. The Mössbauer parameters ( δ = 3.68 mm/s, Δ = 0.99 mm/s) are similar to those of SnBrF and of Sn2BrF5, thereby showing that tin is bonded to both fluorine and bromine. The larger isomer shift and lower quadrupole splitting than in tin(II) fluorides show that the stereoactivity of the tin lone pair is lower than in the fluorides. The Mössbauer parameters fit well the linear correlation of the quadrupole splitting versus the isomer shift" that has been shown to be present in other series of tin(II) compounds. The linear decrease on this correlation shows that the contribution of non-spherical orbitals ( p and d) to the lone pair is a much larger contributor to the quadrupole splitting than lattice distortions. The structure is likely made of Ba2+ cations and tin(II) fluoride bromide polyatomic anions, with covalent bonding withinthe anions.

  9. Hybrid micro-particles as a magnetically-guidable decontaminant for cesium-eluted ash slurry

    PubMed Central

    Namiki, Yoshihisa; Ueyama, Toshihiko; Yoshida, Takayuki; Watanabe, Ryoei; Koido, Shigeo; Namiki, Tamami

    2014-01-01

    Decontamination of the radioactive cesium that is widely dispersed owing to a nuclear power station accident and concentrated in fly ash requires an effective elimination system. Radioactive fly ash contains large amounts of water-soluble cesium that can cause severe secondary contamination and represents a serious health risk, yet its complete removal is complicated and difficult. Here it is shown that a new fine-powder formulation can be magnetically guided to eliminate cesium after being mixed with the ash slurry. This formulation, termed MagCE, consists of a ferromagnetic porous structure and alkaline- and salt-resistant nickel ferrocyanide. It has potent cesium-adsorption- and magnetic-separation-properties. Because of its resistance against physical and chemical attack such as with ash particles, as well as with the high pH and salt concentration of the ash slurry, MagCE simplifies the decontamination process without the need of the continued presence of the hazardous water-soluble cesium in the treated ash. PMID:25192495

  10. Efficiency of fly ash belite cement and zeolite matrices for immobilizing cesium.

    PubMed

    Goñi, S; Guerrero, A; Lorenzo, M P

    2006-10-11

    The efficiency of innovative matrices for immobilizing cesium is presented in this work. The matrix formulation included the use of fly ash belite cement (FABC-2-W) and gismondine-type Na-P1 zeolite, both of which are synthesized from fly ash of coal combustion. The efficiency for immobilizing cesium is evaluated from the leaching test ANSI/ANS 16.1-1986 at the temperature of 40 degrees C, from which the apparent diffusion coefficient of cesium is obtained. Matrices with 100% of FABC-2-W are used as a reference. The integrity of matrices is evaluated by porosity and pore-size distribution from mercury intrusion porosimetry, X-ray diffraction and nitrogen adsorption analyses. Both matrices can be classified as good solidify systems for cesium, specially the FABC-2-W/zeolite matrix in which the replacement of 50% of belite cement by the gismondine-type Na-P1 zeolite caused a decrease of two orders of magnitude of cesium mean Effective Diffusion Coefficient (D(e)) (2.8e-09 cm(2)/s versus 2.2e-07 cm(2)/s, for FABC-2-W/zeolite and FABC-2-W matrices, respectively).

  11. ADVANCED TECHNOLOGIES FOR THE SIMULTANEOUS SEPARATION OF CESIUM AND STRONTIUM FROM SPENT NUCLEAR FUEL

    SciTech Connect

    Jack D. Law; Terry A. Todd; R. Scott Herbst; David H. Meikrantz; Dean R. Peterman; Catherine L. Riddle; Richard D. Tillotson

    2005-02-01

    Two new solvent extraction technologies have been recently developed to simultaneously separate cesium and strontium from spent nuclear fuel, following dissolution in nitric acid. The first process utilizes a solvent consisting of chlorinated cobalt dicarbollide and polyethylene glycol extractants in a phenyltrifluoromethyl sulfone diluent. Recent improvements to the process include development of a new, non-nitroaromatic diluent and development of new stripping reagents, including a regenerable strip reagent that can be recovered and recycled. This new strip reagent reduces product volume by a factor of 20, over the baseline process. Countercurrent flowsheet tests on simulated spent nuclear fuel feed streams have been performed with both cesium and strontium removal efficiencies of greater than 99 %. The second process developed to simultaneously separate cesium and strontium from spent nuclear fuel is based on two highly-specific extractants: 4',4',(5')-Di-(t-butyldicyclo-hexano)-18-crown-6 (DtBuCH18C6) and Calix[4]arene-bis-(tert-octylbenzo-crown-6) (BOBCalixC6). The DtBuCH18C6 extractant is selective for strontium and the BOBCalixC6 extractant is selective for cesium. A solvent composition has been developed that enables both elements to be removed together and, in fact, a synergistic effect was observed with strontium distributions in the combined solvent that are much higher that in the strontium extraction (SREX) process. Initial laboratory test results of the new combined cesium and strontium extraction process indicate good extraction and stripping performance.

  12. In situ mobilization of colloids and transport of cesium in Hanford sediments.

    PubMed

    Flury, Markus; Mathison, Jon B; Harsh, James B

    2002-12-15

    Radioactive waste, accumulated during Pu production, has leaked into the subsurface from underground storage tanks at the U.S. Department of Energy's Hanford site. The leaking solutions contained 137Cs and were of high ionic strength. Such a tank leak was simulated experimentally in steady-state flow experiments with packed Hanford sediments. The initial leak was simulated by a 1 M NaNO3 solution, followed by a decrease of ionic strength to 1 mM NaNO3. Cesium breakthrough curves were determined in both 1 M and 1 mM NaNO3 background. Colloidal particles were mobilized during the change of ionic strength. Mobilized colloids consisted mainly of quartz, mica, illite, kaolinite, and chlorite. Electrophoretic mobilities of colloids in the eluent solution were -3(microm/s)(V/cm) and increased to less negative values during later stages of mobilization. Mobilized colloids carried a fraction of the cesium along. While transport of cesium in 1 M NaNO3 background was much faster than in 1 mM NaNO3, cesium attached to colloids moved almost unretarded through the sediments. Cesium attached to mobilized colloids was likely associated with high affinity sorption sites on micas and illites.

  13. Development program for magnetically assisted chemical separation: Evaluation of cesium removal from Hanford tank supernatant

    SciTech Connect

    Nunez, L.; Buchholz, B.A.; Ziemer, M.; Dyrkacz, G.; Kaminski, M.; Vandegrift, G.F.; Atkins, K.J.; Bos, F.M.; Elder, G.R.; Swift, C.A.

    1994-12-01

    Magnetic particles (MAG*SEP{sup SM}) coated with various absorbents were evaluated for the separation and recovery of low concentrations of cesium from nuclear waste solutions. The MAG*SEP{sup SM} particles were coated with (1) clinoptilolite, (2) transylvanian volcanic tuff, (3) resorcinol formaldehyde, and (4) crystalline silico-titanate, and then were contacted with a Hanford supernatant simulant. Particles coated with the crystalline silico-titanate were identified by Bradtec as having the highest capacity for cesium removal under the conditions tested (variation of pH, ionic strength, cesium concentration, and absorbent/solution ratio). The MAG*SEP{sup SM} particles coated with resorcinol formaldehyde had high distribution ratios values and could also be used to remove cesium from Hanford supernant simulant. Gamma irradiation studies were performed on the MAG*SEP{sup SM} particles with a gamma dose equivalent to 100 cycles of use. This irradiation decreased the loading capacity and distribution ratios for the particles by greater than 75%. The particles demonstrated high sensitivity to radiolytic damage due to the degradation of the polymeric regions. These results were supported by optical microscopy measurements. Overall, use of magnetic particles for cesium separation under nuclear waste conditions was found to be marginally effective.

  14. Improvement of cesium leaching resistance of solidified borate wastes with copper-ferrocyanide-vermiculite adsorbent

    SciTech Connect

    Huang, C.T.; Wu, G.

    1996-09-01

    Removal of cesium from deionized water, sea water, and lime water with copper ferrocyanide (CFC) and porous media including silica gel, bentonite, vermiculite, and zeolite were investigated; CFC and vermiculite were incorporated to prepare a compound adsorbent which was used to improve the Cs-leaching resistance of solidified borate wastes. It was shown that the Cs-removal efficiency by CFC is largely affected by pHs of the solutions, good cesium removal occurs in pHs ranged from 3 to 12 and the best from 7 to 10; the effect of Cs concentration is significantly only from lime water for Cs > 10{sup {minus}6} M at high pH and is insignificant from other solutions. Vermiculite and zeolite were shown to have better removal efficiency than silica gel and bentonite, and vermiculite was chosen to incorporate with CFC to make compound adsorbents because of its good compatibility with CFC. Compound adsorbents with different CFC contents were used as additives in the solidification of borate radwaste for improving the cesium leaching resistance of waste forms. Experimental results showed that the measured, cesium leaching index following ANSI/ANS 16.1, was increased from 7.96 to 9.76 by adding 0.25% of a compound adsorbent containing 20% CFC and 80% vermiculite, which indicated that the CFC-vermiculite compound adsorbent is very useful for improving cesium leaching resistance of the solidified borate radwastes.

  15. An isotope dilution-precipitation process for removing radioactive cesium from wastewater.

    PubMed

    Rogers, Harold; Bowers, John; Gates-Anderson, Dianne

    2012-12-01

    A novel isotope dilution-precipitation method has been developed to remove cesium-137 from radioactive wastewater. The process involves adding stable cesium chloride to wastewater in order to raise the total cesium concentration, which then allows both the stable and radioactive cesium ions to be precipitated together using sodium tetraphenylborate. This process was investigated utilizing laboratory solutions to determine stable cesium dose rates, mixing times, effects of pH, and filtration requirements. Once optimized, the process was then tested on synthetic wastewater and aqueous low-level waste. Experiments showed the reaction to be very quick and stable in the pH range tested, 2.5-11.5. The wastewater may need to be filtered using a 0.45-μm filter, though ferric sulfate has been shown to promote coagulation and settling, thereby eliminating the necessity for filtration. This investigation showed that this isotope dilution-precipitation process can remove Cs-37 levels below the U.S. Department of Energy's (DOE) Derived Concentration Standard (DCS) of 3.0 × 10(-6) μCi/mL using a single dosage, potentially allowing the wastewater to be discharged directly to sanitary sewers.

  16. Removal of cesium from simulated liquid waste with countercurrent two-stage adsorption followed by microfiltration.

    PubMed

    Han, Fei; Zhang, Guang-Hui; Gu, Ping

    2012-07-30

    Copper ferrocyanide (CuFC) was used as an adsorbent to remove cesium. Jar test results showed that the adsorption capacity of CuFC was better than that of potassium zinc hexacyanoferrate. Lab-scale tests were performed by an adsorption-microfiltration process, and the mean decontamination factor (DF) was 463 when the initial cesium concentration was 101.3μg/L, the dosage of CuFC was 40mg/L and the adsorption time was 20min. The cesium concentration in the effluent continuously decreased with the operation time, which indicated that the used adsorbent retained its adsorption capacity. To use this capacity, experiments on a countercurrent two-stage adsorption (CTA)-microfiltration (MF) process were carried out with CuFC adsorption combined with membrane separation. A calculation method for determining the cesium concentration in the effluent was given, and batch tests in a pressure cup were performed to verify the calculated method. The results showed that the experimental values fitted well with the calculated values in the CTA-MF process. The mean DF was 1123 when the dilution factor was 0.4, the initial cesium concentration was 98.75μg/L and the dosage of CuFC and adsorption time were the same as those used in the lab-scale test. The DF obtained by CTA-MF process was more than three times higher than the single-stage adsorption in the jar test.

  17. Potential of Calendula alata for phytoremediation of stable cesium and lead from solutions.

    PubMed

    Borghei, Mehdi; Arjmandi, Reza; Moogouei, Roxana

    2011-10-01

    Calendula alata plants were tested for their potential to remove stable cesium and lead from solutions in a 15-day period. The plants were grown hydroponically and placed in solutions containing CsCl and Pb(C₂H₃O₂)₂ at different concentrations (0.6, 2 and 5 mg l⁻¹). When plants were incubated in CsCl solutions 46.84 ± 2.12%, 41.35 ± 1.59%, and 52.06 ± 1.02% cesium was found to be remediated after 15 days. Moreover, more than 99% lead was removed from the Pb(C₂H₃O₂)₂ solution in all three concentrations after 15 days during the same period. When both CsCl and Pb(C₂H₃O₂)₂ were supplemented together in the solution, 9.92 ± 1.22%, 45.56 ± 3.52%, and 46.16 ± 1.48% cesium and 95.30 ± 0.72%, 96.64 ± 0.30%, and 99.02 ± 0.04% lead were removed after 15 days. The present study suggests that hydroponically grown C. alata could be used as a potential candidate plant for phytoremediation of cesium and lead from solutions; however, plants were found to be more efficient for the remediation of lead than cesium.

  18. Calixarene crown ether solvent composition and use thereof for extraction of cesium from alkaline waste solutions

    DOEpatents

    Moyer, Bruce A.; Sachleben, Richard A.; Bonnesen, Peter V.; Presley, Derek J.

    2001-01-01

    A solvent composition and corresponding method for extracting cesium (Cs) from aqueous neutral and alkaline solutions containing Cs and perhaps other competing metal ions is described. The method entails contacting an aqueous Cs-containing solution with a solvent consisting of a specific class of lipophilic calix[4]arene-crown ether extractants dissolved in a hydrocarbon-based diluent containing a specific class of alkyl-aromatic ether alcohols as modifiers. The cesium values are subsequently recovered from the extractant, and the solvent subsequently recycled, by contacting the Cs-containing organic solution with an aqueous stripping solution. This combined extraction and stripping method is especially useful as a process for removal of the radionuclide cesium-137 from highly alkaline waste solutions which are also very concentrated in sodium and potassium. No pre-treatment of the waste solution is necessary, and the cesium can be recovered using a safe and inexpensive stripping process using water, dilute (millimolar) acid solutions, or dilute (millimolar) salt solutions. An important application for this invention would be treatment of alkaline nuclear tank wastes. Alternatively, the invention could be applied to decontamination of acidic reprocessing wastes containing cesium-137.

  19. Solid phase microextraction for active or passive sampling of methyl bromide during fumigations

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The high diffusivity and volatility of methyl bromide make it an ideal compound for Solid Phase Micro Extraction (SPME)-based sampling of air prior to gas-chromatographic quantifications. SPME fibers can be used as active methyl bromide samplers, with high capacities and an equilibrium time of 1-2 m...

  20. Synergistic Actions of Pyridostigmine Bromide and Insecticides on Muscle and Vascular Nociceptors

    DTIC Science & Technology

    2014-01-01

    TITLE: Synergistic Actions of Pyridostigmine Bromide and Insecticides on Muscle and Vascular Nociceptors PRINCIPAL INVESTIGATOR: Brian...pyridostigmine bromide (PB) and a variety of insecticides /repellants co-varied with the development of this condition (Research Advisory Committee on Gulf War...might occur between insecticides , repellants and nerve agent prophylactics used during the GW could modify or damage the machinery of protein

  1. Destruction of methyl bromide sorbed to activated carbon by thiosulfate and electrolysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is widely used as a fumigant for post-harvest and quarantine uses at port facilities due to the low treatment times required, but it is vented to the atmosphere after its use. Due to the potential contributions of methyl bromide to stratospheric ozone depletion, technologies for the c...

  2. 75 FR 41177 - Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-15

    ... 2013 control period? U.S. consumption of methyl bromide in the U.S. has declined significantly over the... Act, 42 U.S.C. 7671c. Under EPA implementing regulations, methyl bromide production and consumption... Montreal Protocol provides that the Parties may exempt ``the level of production or consumption that...

  3. Classifying the Basic Parameters of Ultraviolet Copper Bromide Laser

    NASA Astrophysics Data System (ADS)

    Gocheva-Ilieva, S. G.; Iliev, I. P.; Temelkov, K. A.; Vuchkov, N. K.; Sabotinov, N. V.

    2009-10-01

    The performance of deep ultraviolet copper bromide lasers is of great importance because of their applications in medicine, microbiology, high-precision processing of new materials, high-resolution laser lithography in microelectronics, high-density optical recording of information, laser-induced fluorescence in plasma and wide-gap semiconductors and more. In this paper we present a statistical study on the classification of 12 basic lasing parameters, by using different agglomerative methods of cluster analysis. The results are based on a big amount of experimental data for UV Cu+ Ne-CuBr laser with wavelengths 248.6 nm, 252.9 nm, 260.0 nm and 270.3 nm, obtained in Georgi Nadjakov Institute of Solid State Physics, Bulgarian Academy of Sciences. The relevant influence of parameters on laser generation is also evaluated. The results are applicable in computer modeling and planning the experiments and further laser development with improved output characteristics.

  4. Accommodation coefficient of HOBr on deliquescent sodium bromide aerosol particles

    NASA Astrophysics Data System (ADS)

    Wachsmuth, M.; Gäggeler, H. W.; von Glasow, R.; Ammann, M.

    2002-06-01

    Uptake of HOBr on sea salt aerosol, sea salt brine or ice is believed to be a key process providing a source of photolabile bromine (Br2) and sustaining ozone depletion cycles in the Arctic troposphere. In the present study, uptake of HOBr on sodium bromide (NaBr) aerosol particles was investigated at an extremely low HOBr concentration of 300 cm-3 using the short-lived radioactive isotopes 83-86Br. Under these conditions, at maximum one HOBr molecule was taken up per particle. The rate of uptake was clearly limited by the mass accommodation coefficient, which was calculated to be 0.6 ± 0.2. This value is a factor of 10 larger than estimates used in earlier models. The atmospheric implications are discussed using the box model "MOCCA'', showing that the increase of the accommodation coefficient of HOBr by a factor of 10 only slightly affects net ozone loss, but significantly increases chlorine release.

  5. Theoretical and experimental studies of silver bromide clusters

    NASA Astrophysics Data System (ADS)

    Zhang, Hongguang

    2000-11-01

    This work consists of three parts: Experimental synthesis of silver bromide clusters via the electroporation of unilamellar dioleoylphosphatidylcholine (DOPC) vesicles, theoretical study of the structure and electronic properties of (AgBr)n clusters, and characterization of silver bromide clusters grown and their interaction with the surface of DOPC vesicles. In the first part, we successfully synthesized AgBr quantum dots via the electroporation of vesicles. For the first time, we observed the entire blue-shift followed by red-shift of the absorption band (274nm --> 5h 269nm --> 6h 273nm) that is associated with the growth of the silver bromide clusters. The turn-around point is at 269 nm. In the second part, we have theoretically investigated the structures and UV absorption spectra of (AgBr)n clusters (n = 1-9) in both the gas phase and in a dielectric medium. The structures of clusters were determined at the B3P86/SB level with full geometry optimization. For clusters with n = 1-6, extensive searches of the potential energy surface yielded only one minimum, while larger clusters displayed two or more minima. UV absorption spectra were calculated by the configuration interaction singlet (CIS) method with a much larger basis set. Our computational results parallel the experimental trends, and show that the turn- around point occurs at the trimer according to HOMO-LUMO gap calculation and at the tetramer according to CIS calculation. The molecular origin of the blue/red shift associated with AgBr cluster growth can be readily explained by examining the orbital interactions which dominate the process and by the structure of the clusters. The detailed molecular orbital energy level correlation diagram for the dimerization, trimerization and tetramerization will be presented. In the third part, TEM characterization of the quantum dots show

  6. Error Evaluation of Methyl Bromide Aerodynamic Flux Measurements

    USGS Publications Warehouse

    Majewski, M.S.

    1997-01-01

    Methyl bromide volatilization fluxes were calculated for a tarped and a nontarped field using 2 and 4 hour sampling periods. These field measurements were averaged in 8, 12, and 24 hour increments to simulate longer sampling periods. The daily flux profiles were progressively smoothed and the cumulative volatility losses increased by 20 to 30% with each longer sampling period. Error associated with the original flux measurements was determined from linear regressions of measured wind speed and air concentration as a function of height, and averaged approximately 50%. The high errors resulted from long application times, which resulted in a nonuniform source strength; and variable tarp permeability, which is influenced by temperature, moisture, and thickness. The increase in cumulative volatilization losses that resulted from longer sampling periods were within the experimental error of the flux determination method.

  7. Reactions of buffers in cyanogen bromide-induced ligations.

    PubMed

    Vogel, Heike; Gerlach, Claudia; Richert, Clemens

    2013-01-01

    Rapid, template-directed ligation reactions between a phosphate-terminated oligonucleotide and an unphosphorylated reaction partner may be induced by cyanogen bromide (BrCN). Frequently, however, the reaction is low yielding, and even a large excess of the condensing agent can fail to induce quantitative conversions. In this study, we used BrCN to induce chemical primer extension reactions. Here, we report that buffers containing hydroxyl groups react with short oligodeoxynucleotides in the presence of BrCN. One stable adduct between HEPBS buffer and cytosine was characterized by mass spectrometry and NMR after HPLC purification, indicating that a side reaction occurred at this nucleobase. Further, a first example of a primer extension reaction between an unmodified oligodeoxynucleotide as primer and dGMP is reported. Together, our results shed light on the potency, as well as the drawbacks of BrCN as a highly reactive condensing reagent for the ligation of unmodified nucleic acids.

  8. Location of Bromide Ions in Tetragonal Lysozyme Crystals

    NASA Technical Reports Server (NTRS)

    Lim, Kap; Nadarajah, Arunan; Forsythe, Elizabeth L.; Pusey, Marc L.

    1998-01-01

    Anions have been shown to play a dominant role in the crystallization of chicken egg white lysozyme from salt solutions. Previous studies employing X-ray crystallography had found one chloride ion binding site in the tetragonal crystal form of the protein and four nitrate ion binding sites in the monoclinic form. In this study the anion positions in the tetragonal form were determined from the difference Fourier map obtained from lysozyme crystal grown in bromide and chloride solutions. Five possible anion binding sites were found in this manner. Some of these sites were in pockets containing basic residues while others were near neutral, but polar, residues. The sole chloride ion binding site found in previous studies was confirmed, while four of these sites corresponded to four binding sites found for nitrate ions in monoclinic crystals. The study suggests that most of the anion binding sites in lysozyme remain unchanged, even when different anions and different crystal forms of lysozyme are employed.

  9. Unveiling Residual Molecular Binding in Triply Charged Hydrogen Bromide

    SciTech Connect

    Penent, F.; Lablanquie, P.; Palaudoux, J.; Gamblin, G.; Carniato, S.; Andric, L.; Hikosaka, Y.; Ito, K.

    2011-03-11

    We present an experimental and theoretical study of triply charged hydrogen bromide ions formed by photoionization of the inner 3d shell of Br. The experimental results, obtained by detecting the 3d photoelectron in coincidence with the two subsequent Auger electrons, are analyzed using calculated potential energy curves of HBr{sup 3+}. The competition between the short-range chemical binding potential and the Coulomb repulsion in the dissociative process is shown. Two different mechanisms are observed for double Auger decay: one, a direct process with simultaneous ejection of two Auger electrons to final HBr{sup 3+} ionic states and the other, a cascade process involving double Auger decay characterized by the autoionization of Br*{sup +} ion subsequent to the HBr{sup 2+} fragmentation.

  10. Effects of pyridostigmine bromide on in-flight aircrew performance.

    PubMed

    Gawron, V J; Schiflett, S G; Miller, J C; Slater, T; Ball, J F

    1990-02-01

    The effects of a chemical defense pretreatment drug, pyridostigmine bromide (PB), on in-flight aircrew performance were assessed using the Total In-Flight Simulator (TIFS) aircraft. TIFS was used to supply appropriate control dynamics, handling characteristics, and cockpit instrumentation for a tactical transport airdrop simulation. Twenty-one C-130 pilots flew two familiarization and four data flights. During two data flights PB was given to both members of the aircrew using the dosage regimen of 30 mg/8 h prescribed by the U.S. Air Force surgeon general. The drug was administered using a double-blind technique. The results indicated that (1) aircrews successfully completed their assigned mission, (2) airdrop inaccuracies and navigation errors in time and distance were not specifically related to PB, (3) performance and crew coordination were not affected by PB, (4) PB and pilot/copilot not discriminate beyond chance between PB and placebo conditions.

  11. Tiotropium Bromide in Chronic Obstructive Pulmonary Disease and Bronchial Asthma

    PubMed Central

    Alvarado-Gonzalez, Alcibey; Arce, Isabel

    2015-01-01

    Inhaled bronchodilators are the mainstay of pharmacological treatment for stable chronic obstructive pulmonary disease (COPD), including β2-agonists and muscarinic antagonists. Tiotropium bromide, a long-acting antimuscarinic bronchodilator (LAMA), is a treatment choice for moderate-to-severe COPD; its efficacy and safety have been demonstrated in recent trials. Studies also point to a beneficial role of tiotropium in the treatment of difficult-to-control asthma and a potential function in the asthma-COPD overlap syndrome (ACOS). Combination of different bronchodilator molecules and addition of inhaled corticosteroids are viable therapeutic alternatives. A condensation of the latest trials and the rationale behind these therapies will be presented in this article. PMID:26491494

  12. N-(2-Bromo-benz-yl)cinchoninium bromide.

    PubMed

    Skórska-Stania, Agnieszka; Jezierska-Zięba, Magdalena; Kąkol, Barbara; Fedoryński, Michał; Oleksyn, Barbara J

    2012-09-01

    The title compound {systematic name: 1-(2-bromo-benz-yl)-5-ethenyl-2-[hy-droxy(quinolin-4-yl)meth-yl]-1-aza-bicyclo-[2.2.2]octan-1-ium bromide}, C(26)H(28)BrN(2)O(+)·Br(-), is a chiral quater-nary ammonium salt of one of the Cinchona alkaloids. The planes of the quinoline and of the bromo-benzyl substituent are inclined to one another by 9.11 (9)°. A weak intra-molecular C-H⋯O hydrogen bond occurs. The crystal structure features strong O-H⋯Br hydrogen bonds and weak C-H⋯Br inter-actions.

  13. N-(2-Bromo­benz­yl)cinchoninium bromide

    PubMed Central

    Skórska-Stania, Agnieszka; Jezierska-Zięba, Magdalena; Kąkol, Barbara; Fedoryński, Michał; Oleksyn, Barbara J.

    2012-01-01

    The title compound {systematic name: 1-(2-bromo­benz­yl)-5-ethenyl-2-[hy­droxy(quinolin-4-yl)meth­yl]-1-aza­bicyclo­[2.2.2]octan-1-ium bromide}, C26H28BrN2O+·Br−, is a chiral quater­nary ammonium salt of one of the Cinchona alkaloids. The planes of the quinoline and of the bromo­benzyl substituent are inclined to one another by 9.11 (9)°. A weak intra­molecular C—H⋯O hydrogen bond occurs. The crystal structure features strong O—H⋯Br hydrogen bonds and weak C—H⋯Br inter­actions. PMID:22969676

  14. Electrochemical and spectroscopic study of octadecyltrimethylammonium bromide/DNA surfoplexes.

    PubMed

    Rodríguez-Pulido, Alberto; Aicart, Emilio; Junquera, Elena

    2009-04-21

    The use of cationic micelles consisting of octadecyltrimethylammonium bromide (C18TAB) to compact calf thymus DNA has been investigated in aqueous buffered solution at 310.15 K by means of conductometry, electrophoretic mobility, and several fluorescence spectroscopy methods. The results indicate that C18TAB micelles, consisting of 44 monomers on average, may compact DNA molecule by an electrostatic interaction that takes place at the cationic spherical micelle surface. The surfoplexes thus formed show a surface density charge that goes from negative to positive values at a Lmic/D mass ratio of around 1.0 (where Lmic and D are the masses of micellized cationic surfactant and DNA), called the isoneutrality ratio (Lmic/D)phi. Values of this characteristic parameter, determined in this work not only from the electrochemical experimental data but also from spectroscopic measurements, are in very good agreement with those ones calculated from molecular parameters and some other properties also obtained in this work. The electrostatic character of the DNA-micelle interaction has been confirmed by analyzing the decrease in fluorescence emission of the fluorophore ethidium bromide, EtBr, initially intercalated between DNA base pairs, as long as the surfoplexes are formed. Fluorescence anisotropy experiments have revealed that micelle packing becomes more rigid in the presence of DNA, but once the surfoplex is formed, the fluidity increases with the Lmic/D mass ratio, attaining its maximum when the isoneutrality ratio is exceeded. This fact, together with the net positive charge of the surfoplexes with the Lmic/D mass ratio over the isoneutrality ratio, makes this regimen of lipid and DNA content the optimum for efficiency in the transfection process.

  15. Comparative mobility of sulfonamides and bromide tracer in three soils

    USGS Publications Warehouse

    Kurwadkar, S.T.; Adams, C.D.; Meyer, M.T.; Kolpin, D.W.

    2011-01-01

    In animal agriculture, sulfonamides are one of the routinely used groups of antimicrobials for therapeutic and sub-therapeutic purposes. It is observed that, the animals when administered the antimicrobials, often do not completely metabolize them; and excrete the partially metabolized forms into the environment. Due to the continued use of antimicrobials and disposal of untreated waste, widespread occurrence of partially metabolized antimicrobials in aquatic and terrestrial environments has been reported in various scientific journals. In this research, the mobility of two sulfonamides - sulfamethazine (SMN), sulfathiazole (STZ) and a conservative bromide tracer was investigated in three soils collected from regions in the United States with large number of concentrated animal-feed operations. Results of a series of column studies indicate that the mobility of these two sulfonamides was dependent on pH, soil charge density, and contact time. At low pH and high charge density, substantial retention of sulfonamides was observed in all three soils investigated, due to the increased fraction of cationic and neutral forms of the sulfonamides. Conversely, enhanced mobility was observed at high pH, where the sulfonamides are predominantly in the anionic form. The results indicate that when both SMN and STZ are predominantly in anionic forms, their mobility approximates the mobility of a conservative bromide tracer. This observation is consistent for the mobility of both SMN and STZ individually, and also in the presence of several other antimicrobials in all three soils investigated. Higher contact time indicates lower mobility due to increased interaction with soil material. ?? 2011.

  16. Nebulised ipratropium bromide and sodium cromoglycate in the first two years of life.

    PubMed Central

    Henry, R L; Hiller, E J; Milner, A D; Hodges, I G; Stokes, G M

    1984-01-01

    In a double blind crossover trial, we compared sodium cromoglycate, ipratropium bromide, and water in 23 asthmatic children less than 2 years old (mean age 11.8 months). Each child received nebulised solutions containing 20 mg of sodium cromoglycate, 250 micrograms of ipratropium bromide, or 2 ml water three times a day for three two month periods. Daily symptom scores did not show significant differences between the treatments but parental preferences indicated that both sodium cromoglycate and ipratropium bromide were superior to placebo. Sodium cromoglycate was prophylactic and was more likely to help the older patients. Ipratropium bromide produced an immediate clinical benefit and the response was not age dependent. We were unable to pick responders from non-responders on the basis of lung function tests performed on a routine outpatient basis. Both ipratropium bromide and sodium cromoglycate help some but not all asthmatic children aged less than 2 years. PMID:6230059

  17. X-Ray absorption spectroscopy investigation of 1-alkyl-3-methylimidazolium bromide salts

    SciTech Connect

    D'Angelo, Paola; Zitolo, Andrea; Migliorati, Valentina; Bodo, Enrico; Caminiti, Ruggero; Aquilanti, Giuliana; Hazemann, Jean Louis; Testemale, Denis; Mancini, Giordano

    2011-08-21

    X-ray absorption spectroscopy (XAS) has been used to unveil the bromide ion local coordination structure in 1-alkyl-3-methylimidazolium bromide [C{sub n}mim]Br ionic liquids (ILs) with different alkyl chains. The XAS spectrum of 1-ethyl-3-methylimidazolium bromide has been found to be different from those of the other members of the series, from the butyl to the decyl derivatives, that have all identical XAS spectra. This result indicates that starting from 1-buthyl-3-methylimidazolium bromide the local molecular arrangement around the bromide anion is the same independently from the length of the alkyl chain, and that the imidazolium head groups in the liquid ILs with long alkyl chains assume locally the same orientation as in the [C{sub 4}mim]Br crystal. With this study we show that the XAS technique is an effective direct tool for unveiling the local structural arrangements around selected atoms in ILs.

  18. Bromide's effect on DBP formation, speciation, and control; Part 1: Ozonation

    SciTech Connect

    Shukairy, H.M.; Summers, R.S. ); Miltner, R.J. . Drinking Water Research Div.)

    1994-06-01

    The effect of variable ozone dosage and bromide concentration on the formation of organic disinfection by-products (DBPs) and bromate were evaluated. Low ozone dosages resulted in oxidation of organic precursors, yielding decreases in the formation potential for total trihalomethanes (THMs), six haloacetic acids (HAAs), and total organic halide (TOX). Increasing the ozone dosage oxidized bromide to bromate, decreasing the bromide for incorporation into DBPs. Bromate concentrations were linearly correlated with ozone residuals. Changes in the bromine incorporation factors n and n[prime] reflected differences in the resulting speciation of THMs and HAAs, respectively. Because TOX measurements based on chloride equivalence may underestimate the halogenated DBP yield for high-bromide waters, a procedure is described whereby bromide and bromate concentrations were used to correct the TOX measurement.

  19. Comparison of organic and inorganic ion exchange materials for removal of cesium and strontium from tank waste

    SciTech Connect

    Brown, G.

    1996-10-01

    This work is part of an ESP task to develop high-capacity, selective, solid extractants for cesium, strontium, and technetium from nuclear wastes. Pacific Northwest National Laboratory (PNNL) staff are investigating novel ion exchangers for use in nuclear waste remediation (groundwater, high-level waste (HLW), and low-level waste (LLW)). Waste components targeted for remediation include cesium, strontium, and technetium.

  20. High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1974-01-01

    Lanthanum-hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium-diode performance should result from the lower collector temperatures allowed for earth and low-power-space duties. Decreased temperatures will lessen thermal-transport losses that attend thermionic-conversion mechanisms. Such advantages will add to those from collector-Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes appear feasible.

  1. Selection of chemotherapy for metastatic mammary cancer by effect on cesium-131 uptake.

    PubMed

    Ferguson, D J; Harper, P V

    1977-09-01

    Cesium-131 was administered intravenously to 39 patients with superficial metastases of mammary carcinoma and the concentration in tumor was compared with that in normal tissue by application of a detector in vivo, before and after 1 to 5 days of chemotherapy with cyclophosphamide (CP), 5-fluorouracil (FU), or diethylstilbestrol. A change of the cesium concentration ratio (tumor/normal tissue) greater than 15% after brief treatment correctly predicted the therapeutic effect after 1 to 39 months on the tumors that were tested in 30 of 33 tests. No reliable correlation could be made in the remaining 21 tests in which the change of ratio was less than 15%. The concentration of cesium-131 in the skin, fat, and skeletal muscle of mice was not appreciably altered by treatment for 5 days with CP or FU.

  2. Operational stability of rubidium and cesium frequency standards. [analysis of equipment performance at NASA tracking stations

    NASA Technical Reports Server (NTRS)

    Lavery, J. E.

    1972-01-01

    In the course of testing various rubidium and cesium frequency standards under operational conditions for use in NASA tracking stations, about 55 unit-years of relative frequency measurements for averaging times from 10 to 10 to the 7th power have been accumulated at Goddard Space Flight Center (GSFC). Statistics on the behavior of rubidium and cesium standards under controlled laboratory conditions have been published, but it was not known to what extent the lesser controlled environments of NASA tracking stations affected the performance of the standards. The purpose of this report is to present estimates of the frequency stability of rubidium and cesium frequency standards under operational conditions based on the data accumulated at GSFC.

  3. Decontamination of Radioactive Cesium Released from Fukushima Daiichi Nuclear Power Plant - 13277

    SciTech Connect

    Parajuli, Durga; Minami, Kimitaka; Tanaka, Hisashi; Kawamoto, Tohru

    2013-07-01

    Peculiar binding of Cesium to the soil clay minerals remained the major obstacle for the immediate Cs-decontamination of soil and materials containing clay minerals like sludge. Experiments for the removal of Cesium from soil and ash samples from different materials were performed in the lab scale. For soil and sludge ash formed by the incineration of municipal sewage sludge, acid treatment at high temperature is effective while washing with water removed Cesium from ashes of plants or burnable garbage. Though total removal seems a difficult task, water-washing of wood-ash or garbage-ash at 40 deg. C removes >90% radiocesium, while >60% activity can be removed from soil and sludge-ash by acid washing at 95 deg. C. (authors)

  4. Fluoro-alcohol phase modifiers and process for cesium solvent extraction

    DOEpatents

    Bonnesen, Peter V.; Moyer, Bruce A.; Sachleben, Richard A.

    2003-05-20

    The invention relates to a class of phenoxy fluoro-alcohols, their preparation, and their use as phase modifiers and solvating agents in a solvent composition for the extraction of cesium from alkaline solutions. These phenoxy fluoro-alcohols comply with the formula: ##STR1## in which n=2 to 4; X represents a hydrogen or a fluorine atom, and R.sup.2 -R.sup.6 are hydrogen or alkyl substituents. These phenoxy fluoro-alcohol phase modifiers are a necessary component to a robust solvent composition and process useful for the removal of radioactive cesium from alkaline nuclear waste streams. The fluoro-alcohols can also be used in solvents designed to extract other cesium from acidic or neutral solutions.

  5. Physical Property Modeling of Concentrated Cesium Eluate Solutions, Part I - Derivation of Models

    SciTech Connect

    Choi, A.S.; Pierce, R. A.; Edwards, T. B.; Calloway, T. B.

    2005-09-15

    Major analytes projected to be present in the Hanford Waste Treatment Plant cesium ion-exchange eluate solutions were identified from the available analytical data collected during radioactive bench-scale runs, and a test matrix of cesium eluate solutions was designed within the bounding concentrations of those analytes. A computer model simulating the semi-batch evaporation of cesium eluate solutions was run in conjunction with a multi-electrolyte aqueous system database to calculate the physical properties of each test matrix solution concentrated to the target endpoints of 80% and 100% saturation. The calculated physical properties were analyzed statistically and fitted into mathematical expressions for the bulk solubility, density, viscosity, heat capacity and volume reduction factor as a function of temperature and concentration of each major analyte in the eluate feed. The R{sup 2} of the resulting physical property models ranged from 0.89 to 0.99.

  6. Cesium removal from liquid acidic wastes with the primary focus on ammonium molybdophosphate as an ion exchanger: A literature review

    SciTech Connect

    Miller, C.J.

    1995-03-01

    Many articles have been written concerning the selective removal of cesium from both acidic and alkaline defense wastes. The majority of the work performed for cesium removal from defense wastes involves alkaline feed solutions. Several different techniques for cesium removal from acidic solutions have been evaluated such as precipitation, solvent extraction, and ion exchange. The purpose of this paper is to briefly review various techniques for cesium removal from acidic solutions. The main focus of the review will be on ion exchange techniques, particularly those involving ammonium molybdophosphate as the exchanger. The pertinent literature sources are condensed into a single document for quick reference. The information contained in this document was used as an aid in determining techniques to evaluate cesium removal from the acidic Idaho Chemical Processing Plant waste matrices. 47 refs., 2 tabs.

  7. Caustic-Side Solvent Extraction: Extended Equilibrium Modeling of Cesium and Potassium Distribution Behavior

    SciTech Connect

    Delmau, L.H.

    2002-06-13

    An extension of the model developed in FY01 for predicting equilibrium distribution ratios in the Caustic-Side Solvent Extraction (CSSX) process is presented here. Motivation for extending the model arose from the need to predict extraction performance of the recently optimized solvent composition and the desire to include additional waste components. This model involves the extraction of cesium and potassium from different cesium, potassium, and sodium media over a large range of concentrations. Those different media include a large variety of anions such as nitrate, hydroxide, nitrite, chloride, fluoride, sulfate, and carbonate. The model was defined based on several hundreds of experimental data points and predicted satisfactorily the cesium extraction from five different SRS waste simulants. This process model encompassed almost exclusively 1:1:1 metal:anion:ligand species. Fluoride, sulfate, and carbonate species were found to be very little extractable, and their main impact is reflected through their activity effects. This model gave a very good cesium and potassium extraction prediction from sodium salts, which is what is needed when trying to predict the behavior from actual waste. However, the extraction from potassium or cesium salts, and the extraction of sodium could be improved, and some additional effort was devoted to improve the thermodynamic rigor of the model. Toward this end, more detailed anion-specific models were developed based on the cesium, potassium, and sodium distribution ratios obtained with simple systems containing single anions, but it has not yet proven possible to combine those models to obtain better predictions than provided by the process model.

  8. Alternate Methods for Eluting Cesium from Spherical Resorcinol-Formaldehyde Resin

    SciTech Connect

    Taylor, Paul Allen; Johnson, Heather Lauren

    2009-02-01

    A small-column ion exchange (SCIX) system has been proposed for removing cesium from the supernate and dissolved salt solutions in the high-level-waste tanks at the Savannah River Site (SRS). The SCIX system could use either crystalline silicotitanate (CST), an inorganic, non-regenerable sorbent, or spherical resorcinol-formaldehyde (RF), a new regenerable resin, to remove cesium from the waste solutions. The baseline method for eluting the cesium from the RF resin uses 15 bed volumes (BV) of 0.5 M nitric acid (HNO{sub 3}). The nitric acid eluate, containing the radioactive cesium, would be combined with the sludge from the waste tanks and would be converted into glass at the Defense Waste Processing Facility (DWPF) at SRS. The amount of nitric acid that would be used to elute the RF resin, using the current elution protocol, exceeds the capacity of DWPF to destroy the nitrate ions and maintain the required chemical reducing environment in the glass melt. Installing a denitration evaporator at SRS is technically feasible but would add considerable cost to the project. Alternate methods for eluting the resin have been tested, including using lower concentrations of nitric acid, other acids, and changing the flow regimes. About 4 BV of 0.5 M HNO{sub 3} are required to remove the sodium (titrate the resin) and most of the cesium from the resin, so the bulk of the acid used for the baseline elution method removes a very small quantity of cesium from the resin. A summary of the elution methods that have been tested are listed.

  9. Small-Column Cesium Ion Exchange Elution Testing of Spherical Resorcinol-Formaldehyde

    SciTech Connect

    Brown, Garrett N.; Russell, Renee L.; Peterson, Reid A.

    2011-10-21

    This report summarizes the work performed to evaluate multiple, cesium loading, and elution cycles for small columns containing SRF resin using a simple, high-level waste (HLW) simulant. Cesium ion exchange loading and elution curves were generated for a nominal 5 M Na, 2.4E-05 M Cs, 0.115 M Al loading solution traced with 134Cs followed by elution with variable HNO3 (0.02, 0.07, 0.15, 0.23, and 0.28 M) containing variable CsNO3 (5.0E-09, 5.0E-08, and 5.0E-07 M) and traced with 137Cs. The ion exchange system consisted of a pump, tubing, process solutions, and a single, small ({approx}15.7 mL) bed of SRF resin with a water-jacketed column for temperature-control. The columns were loaded with approximately 250 bed volumes (BVs) of feed solution at 45 C and at 1.5 to 12 BV per hour (0.15 to 1.2 cm/min). The columns were then eluted with 29+ BVs of HNO3 processed at 25 C and at 1.4 BV/h. The two independent tracers allowed analysis of the on-column cesium interaction between the loading and elution solutions. The objective of these tests was to improve the correlation between the spent resin cesium content and cesium leached out of the resin in subsequent loading cycles (cesium leakage) to help establish acid strength and purity requirements.

  10. Proton tunneling in low dimensional cesium silicate LDS-1

    SciTech Connect

    Matsui, Hiroshi Iwamoto, Kei; Mochizuki, Dai; Osada, Shimon; Asakura, Yusuke; Kuroda, Kazuyuki

    2015-07-14

    In low dimensional cesium silicate LDS-1 (monoclinic phase of CsHSi{sub 2}O{sub 5}), anomalous infrared absorption bands observed at 93, 155, 1210, and 1220 cm{sup −1} are assigned to the vibrational mode of protons, which contribute to the strong hydrogen bonding between terminal oxygen atoms of silicate chain (O–O distance = 2.45 Å). The integrated absorbance (oscillator strength) for those modes is drastically enhanced at low temperatures. The analysis of integrated absorbance employing two different anharmonic double-minimum potentials makes clear that proton tunneling through the potential barrier yields an energy splitting of the ground state. The absorption bands at 93 and 155 cm{sup −1}, which correspond to the different vibrational modes of protons, are attributed to the optical transition between the splitting levels (excitation from the ground state (n = 0) to the first excited state (n = 1)). Moreover, the absorption bands at 1210 and 1220 cm{sup −1} are identified as the optical transition from the ground state (n = 0) to the third excited state (n = 3). Weak Coulomb interactions in between the adjacent protons generate two types of vibrational modes: symmetric mode (93 and 1210 cm{sup −1}) and asymmetric mode (155 and 1220 cm{sup −1}). The broad absorption at 100–600 cm{sup −1} reveals an emergence of collective mode due to the vibration of silicate chain coupled not only with the local oscillation of Cs{sup +} but also with the proton oscillation relevant to the second excited state (n = 2)

  11. Concentration Ratios for Cesium and Strontium in Produce Near Los Alamos

    SciTech Connect

    S. Salazar, M.McNaughton, P.R. Fresquez

    2006-03-01

    The ratios of the concentrations of radionuclides in produce (fruits, vegetables, and grains) to the concentrations in the soil have been measured for cesium and strontium at locations near Los Alamos. The Soil, Foodstuffs, and Biota Team of the Meteorology and Air Quality Group of the Los Alamos National Laboratory (LANL) obtained the data at locations within a radius of 50 miles of LANL. The concentration ratios are in good agreement with previous measurements: 0.01 to 0.06 for cesium-137 and 0.1 to 0.5 for strontium-90 (wet-weight basis).

  12. Safety evaluation for packaging (onsite) for cesium chloride capsules with type W overpacks

    SciTech Connect

    McCoy, J.C.

    1997-09-15

    This Safety Evaluation for Packaging (SEP) documents the evaluation of a new basket design and overpacked cesium chloride capsule payload for the Beneficial Uses Shipping System (BUSS) Cask in accordance with the onsite transportation requirements of the Hazardous Material Packaging and Shipping manual, WHC-CM-2-14. This design supports the one-time onsite shipment of 16 cesium chloride capsules with Type W overpacks from the 324 Building to the 224T Building at the Waste Encapsulation and Storage Facility (WESF). The SEP is valid for a one-time onsite shipment or until August 1, 1998, whichever occurs first.

  13. Recent progress in optically-pumped cesium beam clock at Peking University

    NASA Astrophysics Data System (ADS)

    Liu, C.; Zhou, S.; Wan, J.; Wang, S.; Wang, Y.

    2016-06-01

    A compact, long-life, and low-drift cesium beam clock is investigated at Peking University, where the atoms are magnetic-state selected and optically detected. Stability close to that of the best commercial cesium clocks has been achieved from 10 to 105 s. As previously shown, the short-term stability is determined by atomic shot noise or laser frequency noise. The stabilizations of microwave power and C-field improve the long-term stability, with the help of a digital servo system based on field-programmable gate array.

  14. Transfer of radio-cesium from forest soil to woodchips using fungal activities

    NASA Astrophysics Data System (ADS)

    Kaneko, Nobuhiro; Huang, Yao; Tanaka, Yoichiro; Fujiwara, Yoshihiro; Sasaki, Michiko; Toda, Hiroto; Takahashi, Terumasa; Kobayashi, Tatsuaki; Harada, Naoki; Nonaka, Masahiro

    2014-05-01

    Raido-cesium released to terrestrial ecosystems by nuclear accidents is know to accumulate forest soil and organic layer on the soil. Forests in Japan are not exceptions. Practically it is impossible to decontaminate large area of forests. However, there is a strong demand from local people, who has been using secondary forests (Satoyama) around croplands in hilly areas, to decontaminate radio-cesium, because those people used to collect wild mushrooms and edible plants, and there are active cultures of mushrooms using logs and sawdusts. These natural resource uses consist substantial part of their economical activities, Therefore it is needed to decontaminate some selected part of forests in Japan to local economy. Clear cutting and scraping surface soil and organic matter are common methods of decontamination. However the efficiency of decontamination is up to 30% reduction of aerial radiation, and the cost to preserve contaminated debris is not affordable. In this study we used wood chips as a growth media for saprotrophic fungi which are known to accumulate redio-cesium. There are many studies indicated that mushrooms accumulated redio-cesium from forest soil and organic layer. It is not practical to collect mushrooms to decontaminate redio-cesium, because biomass of mushrooms are not enough to collect total contaminants. Mushrooms are only minor part of saprotrophic fungi. Fungal biomass in forest soil is about 1% of dead organic matter on forest floor. Our previous study to observe Cs accumulation to decomposing leaf litter indicated 18% absorption of total soil radio-Cs to litter during one year field incubation (Kaneko et al., 2013), and Cs concentration was proportional to fungal biomass on litter. This result indicated that fungi transferred radio-cesium around newly supplied leaf litter free of contamination. Therefore effective decontamination will be possible if we can provide large amount of growth media for saprotrophic fungi, and the media can be

  15. EVALUATION OF POTENTIAL ELUANTS FOR NON-ACID ELUTION OF CESIUM FROM RESORCINOL-FORMALDEHYDE RESIN

    SciTech Connect

    Adu-Wusu, K.; Pennebaker, F.

    2010-12-22

    Small-column ion exchange (SCIX) units installed in high-level waste tanks to remove Cs-137 from highly alkaline salt solutions are among the waste treatment plans in the DOE-complex. Spherical Resorcinol-Formaldehyde (sRF) is the ion exchange resin selected for use in the Hanford Waste Treatment and Immobilization Plant (WTP). It is also the primary ion exchange material under consideration for SCIX at the Hanford site. The elution step of the multi-step ion exchange process is typically done with 0.5 M nitric acid. An acid eluant is a potential hazard in the event of a spill, leak, etc. because the high-level waste tanks are made of carbon steel. Corrosion and associated structural damage may ensue. A study has been conducted to explore non-acid elution as an alternative. Batch contact sorption equilibrium screening tests have been conducted with 36 potential non-acid eluants. The sorption tests involve equilibrating each cesium-containing eluant solution with the sRF resin for 48 hours at 25 C in a shaker oven. In the sorption tests, an eluant is deemed to have a high cesium elution potential if it minimizes cesium sorption onto the sRF resin. The top candidates (based on lowest cesium sorption distribution coefficients) include ammonium carbonate, ammonium carbonate/ammonium hydroxide, ammonium bicarbonate, rubidium carbonate, ammonium acetate, ammonium acetate/ammonium hydroxide, ammonium bicarbonate/ammonium hydroxide, calcium chloride, and magnesium chloride. A select few of the top candidate eluants from the screening tests were subjected to actual sorption (loading) and elution tests to confirm their elution ability. The actual sorption (loading) and elution tests mimicked the typical sRF-cesium ion exchange process (i.e., sorption or loading, caustic wash, water rinse, and elution) via batch contact sorption and quasi column caustic wash/water rinse/elution. The eluants tested included ammonium carbonate, ammonium acetate, calcium acetate, magnesium

  16. A preliminary deposit model for lithium-cesium-tantalum (LCT) pegmatites

    USGS Publications Warehouse

    Bradley, Dwight; McCauley, Andrew

    2013-01-01

    This report is part of an effort by the U.S. Geological Survey to update existing mineral deposit models and to develop new ones. We emphasize practical aspects of pegmatite geology that might directly or indirectly help in exploration for lithium-cesium-tantalum (LCT) pegmatites, or for assessing regions for pegmatite-related mineral resource potential. These deposits are an important link in the world’s supply chain of rare and strategic elements, accounting for about one-third of world lithium production, most of the tantalum, and all of the cesium.

  17. Performance of preproduction model cesium beam frequency standards for spacecraft applications

    NASA Technical Reports Server (NTRS)

    Levine, M. W.

    1978-01-01

    A cesium beam frequency standards for spaceflight application on Navigation Development Satellites was designed and fabricated and preliminary testing was completed. The cesium standard evolved from an earlier prototype model launched aboard NTS-2 and the engineering development model to be launched aboard NTS satellites during 1979. A number of design innovations, including a hybrid analog/digital integrator and the replacement of analog filters and phase detectors by clocked digital sampling techniques are discussed. Thermal and thermal-vacuum testing was concluded and test data are presented. Stability data for 10 to 10,000 seconds averaging interval, measured under laboratory conditions, are shown.

  18. Derivation of an occupational exposure limit (OEL) for n-propyl bromide using an improved methodology.

    PubMed

    Rozman, Karl K; Doull, John

    2002-10-01

    n-Propyl bromide is an industrial solvent with increasing production volume due to its use as a replacement for fluorohydrocarbons. Therefore, the number of occupationally exposed workers is growing accordingly. This manuscript presents a thorough evaluation of available animal and human data to derive an occupational exposure limit (OEL) for n-propyl bromide. In addition, structure activity relationship within the homologous series of methyl, ethyl, and n-propyl bromide and an identical spectrum of effects caused by similar doses of 2-propyl bromide are used to increase the confidence of the analysis. The structure activity relationship was entirely consistent for acute and subchronic (neurologic, reproductive, and hematopoietic) toxicities and for mutagenic potency in that CH3Br was more toxic than CH3CH2Br, which in turn was more toxic than CH3CH2CH2Br in every case in all species studied, including humans. Animals appeared to be similarly susceptible as, or slightly more susceptible than, humans to n-propyl bromide's toxicity. An OEL (60-90 ppm) was derived from a limited human study and supported by an across-the-toxic-spectrum comparison of animal and human data for both n-propyl and 2-propyl bromide. A carcinogenic classification was not deemed necessary at the recommended OEL based on very low mutagenic potency and the consistent structure activity relationship across the homologous series of these alkyl bromides.

  19. Transport of the radioisotopes iodine-131, cesium-134, and cesium-137 from the fallout following the accident at the Chernobyl nuclear reactor into cheesemaking products

    SciTech Connect

    Assimakopoulos, P.A.; Ioannides, K.G.; Pak; Paradopoulou, C.V.

    1987-07-01

    The transport of radiation contamination from milk to products of the cheese making process has been studied. The concentration of radioactive iodine and cesium in samples of sheep milk and cheese (Gruyere) products was measured for 10 consecutive production d. Milk with concentration 100 Bq/L in each of the radionuclides /sup 131/I, /sup 134/Cs, and /sup 137/Cs cheese with concentration 82.2 +/- 3.9 Bq/kg in iodine and an average of 42.3 +/- 2.3 Bq/kg in the cesium isotopes is produced. The corresponding concentrations in cream extracted from the same milk are 26.7 +/- 2.8 Bq/kg (/sup 131/I) and 18.6 +/- 1.9 Bq/kg (/sup 134/Cs, /sup 137/Cs).

  20. Efficacy and safety of ipratropium bromide/albuterol delivered via Respimat inhaler versus MDI.

    PubMed

    Zuwallack, R; De Salvo, M C; Kaelin, T; Bateman, E D; Park, C S; Abrahams, R; Fakih, F; Sachs, P; Pudi, K; Zhao, Y; Wood, C C

    2010-08-01

    We compared the efficacy and safety of ipratropium bromide/albuterol delivered via Respimat inhaler, a novel propellant-free inhaler, versus chlorofluorocarbon (CFC)-metered dose inhaler (MDI) and ipratropium Respimat inhaler in patients with COPD. This was a multinational, randomized, double-blind, double-dummy, 12-week, parallel-group, active-controlled study. Patients with moderate to severe COPD were randomized to ipratropium bromide/albuterol (20/100mcg) Respimat inhaler, ipratropium bromide/albuterol MDI [36mcg/206mcg (Combivent Inhalation Aerosol MDI)], or ipratropium bromide (20mcg) Respimat inhaler. Each medication was administered four times daily. Serial spirometry was performed over 6h (0.15min, then hourly) on 4 test days. The primary efficacy variable was forced expiratory volume in 1s (FEV(1)) change from test day baseline at 12 weeks. A total of 1209 of 1480 randomized, treated patients completed the study; the majority were male (65%) with a mean age of 64 yrs and a mean screening pre-bronchodilator FEV(1) (percent predicted) of 41%. Ipratropium bromide/albuterol Respimat inhaler had comparable efficacy to ipratropium bromide/albuterol MDI for FEV(1) area under the curve at 0-6h (AUC(0-6)), superior efficacy to ipratropium Respimat inhaler for FEV(1) AUC(0-4) and comparable efficacy to ipratropium Respimat inhaler for FEV(1) AUC(4-6). All active treatments were well tolerated. This study demonstrates that ipratropium bromide/albuterol 20/100mcg inhaler administered four times daily for 12 weeks had equivalent bronchodilator efficacy and comparable safety to ipratropium bromide/albuterol 36mcg/206mcg MDI, and significantly improved lung function compared with the mono-component ipratropium bromide 20 mcg Respimat inhaler. [Clinical Trial Identifier Number: NCT00400153].

  1. The role of tiotropium bromide, a long-acting anticholinergic bronchodilator, in the management of COPD.

    PubMed

    Saberi, Farzad; O'Donnell, Denis E

    2005-01-01

    Bronchodilator therapy forms the mainstay of treatment for symptomatic patients with COPD. Long-acting bronchodilators, which maintain sustained airway patency over a 24-hour period, represent an advance in therapy. Tiotropium bromide is a new long-acting inhaled anticholinergic agent with superior pharmacodynamic properties compared with the short-acting anticholinergic, ipratropium bromide. Tiotropium bromide has been consistently shown to have a greater impact than ipratropium bromide on clinically important outcome measures such as health status. The mechanisms of clinical benefit with tiotropium bromide are multifactorial, but improved airway function, which enhances lung emptying and allows sustained deflation of over-inflated lungs, appears to explain improvements in dyspnea and exercise endurance in COPD. Inhaled tiotropium bromide therapy has also been associated with reduction in acute exacerbations of COPD as well as reduced hospitalizations. The safety profile of tiotropium bromide is impressive: dry mouth is the most common adverse event and rarely necessitates termination of the drug. No tachyphylaxis to tiotropium bromide has been demonstrated in clinical trials lasting up to 1 year. There is preliminary information that the combination of long-acting anticholinergics and long-acting beta2-adrenoceptor agonists provides additive physiological and clinical benefits. According to recent international guidelines, long-acting bronchodilators should be considered early in the management of symptomatic patients with COPD in order to achieve effective symptom alleviation and reduction in activity limitation. Tiotropium bromide, because of its once-daily administration and its established efficacy and tolerability profile, has emerged as an attractive therapeutic option for this condition.

  2. Stable cesium uptake and accumulation capacities of five plant species as influenced by bacterial inoculation and cesium distribution in the soil.

    PubMed

    Djedidi, Salem; Kojima, Katsuhiro; Yamaya, Hiroko; Ohkama-Ohtsu, Naoko; Bellingrath-Kimura, Sonoko Dorothea; Watanabe, Izumi; Yokoyama, Tadashi

    2014-09-01

    The effects of inoculation with Bacillus and Azospirillum strains on growth and cesium accumulation of five plant species, Komatsuna, Amaranth, sorghum, common millet and buckwheat, grown on cesium-spiked soil were assessed for potential use in cesium remediation. Pot experiments were performed using "artificially" Cs-contaminated soil. Three treatments were applied based on Cs location in the soil. For a soil height of 15 cm in the pots, Cs was added as follows: in the top five cm to imitate no ploughing condition; in the bottom five cm simulating inverted ploughing; and uniformly distributed Cs reproducing normal plowing. Generally, inoculation of Cs-exposed plants significantly enhanced growth and tolerance to this element. Transfer factor (ratio of Cs concentration in the plant tissues to that in surrounding soil) was strongly influenced by Cs distribution, with higher values in the top-Cs treatment. Within this treatment, inoculation of Komatsuna with Bacillus and Azospirillum strains resulted in the greatest transfer factors of 6.55 and 6.68, respectively. Cesium content in the shoots was high in the Azospirillum-inoculated Komatsuna, Amaranth, and buckwheat, i.e., 1,830, 1,220, and 1,030 µg per pot, respectively (five plants were grown in each pot). Therefore, inoculation of Komatsuna and Amaranth with the strains tested here could be effective in enhancing Cs accumulation. The decrease of Cs transfer under uniform- and bottom-Cs treatments would suggest that countermeasures aiming at decreasing the transfer of Cs could rely on ploughing practices.

  3. Rapid, easy cyanation of aryl bromides and chlorides using nickel salts in conjunction with microwave promotion.

    PubMed

    Arvela, Riina K; Leadbeater, Nicholas E

    2003-11-14

    We report here a fast, easy, and efficient method for the preparation of aryl nitriles from aryl bromides and chlorides. The methodology for aryl bromides involves the use of either Ni(CN)(2) or NaCN and NiBr(2). With aryl chlorides, a mix of NaCN and NiBr(2) is used and the reaction proceeds via the in situ formation of the corresponding aryl bromide. The reaction can be performed in air and is complete within 10 min.

  4. Bronchodilating effect of combined therapy with ipratropium bromide and ondansetron in patients with COPD.

    PubMed

    Pauwels, Romain; Joos, Guy F; Fogarty, Charles; Faiferman, Isidore; Hirschberg, Sandra; Vessey, Rupert; Wouters, Emiel F M

    2008-01-01

    The objectives of this study were to determine the effect of single and repeat dosing with oral ondansetron, a 5-HT3-specific receptor blocker, on the degree and duration of bronchodilation induced by inhaled ipratropium bromide in patients with COPD. Five clinics and university medical centers in four countries participated in the study; 47 patients with COPD were randomized to treatment; 44 completed all treatments. Patients had a baseline (pre-bronchodilator) FEV1>1L and post-bronchodilator (200 mcg salbutamol) FEV1<90% of predicted, with FEV1 reversibility (to 80 mcg inhaled ipratropium bromide and 400 mcg salbutamol) of at least 12% or 200 mL over baseline. The study was divided into two parts. In Part A, each patient received in a random order, four-way crossover manner, single doses of ondansetron placebo (oral) plus ipratropium bromide placebo (inhaled), ondansetron placebo plus ipratropium bromide 40 mcg inhaled via MDI, ondansetron 24 mg oral plus ipratropium bromide placebo and ondansetron 24 mg plus ipratropium bromide 40 mcg. In Part B, each patient received in a random order, two-way crossover manner, ipratropium bromide 40 mcg tid via MDI plus ondansetron 8 mg oral, qid, for 2 days; on day 3 patients received a single dose of ipratropium bromide 40 mcg plus 8 mg oral ondansetron. Alternatively, patients received ipratropium bromide via MDI and oral ondansetron placebo, as described above. Statistically significant differences in weighted mean FEV1 (0-6h), peak FEV1 and FEV1 determined 6h post-dose were noted comparing ipratropium bromide to placebo. Similar positive results were observed for sGaw and FVC. Addition of ondansetron to ipratropium bromide did not significantly modify values obtained with ipratropium alone. Ipratropium bromide induced a marked bronchodilation, compared to placebo. Addition of ondansetron (single or repeated doses) did not significantly increase the degree or duration of bronchodilation induced by ipratropium alone. s

  5. X-ray imaging performance of structured cesium iodide scintillators.

    PubMed

    Zhao, Wei; Ristic, Goran; Rowlands, J A

    2004-09-01

    Columnar structured cesium iodide (CsI) scintillators doped with Thallium (Tl) have been used extensively for indirect x-ray imaging detectors. The purpose of this paper is to develop a methodology for systematic investigation of the inherent imaging performance of CsI as a function of thickness and design type. The results will facilitate the optimization of CsI layer design for different x-ray imaging applications, and allow validation of physical models developed for the light channeling process in columnar CsI layers. CsI samples of different types and thicknesses were obtained from the same manufacturer. They were optimized either for light output (HL) or image resolution (HR), and the thickness ranged between 150 and 600 microns. During experimental measurements, the CsI samples were placed in direct contact with a high resolution CMOS optical sensor with a pixel pitch of 48 microns. The modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) of the detector with different CsI configurations were measured experimentally. The aperture function of the CMOS sensor was determined separately in order to estimate the MTF of CsI alone. We also measured the pulse height distribution of the light output from both the HL and HR CsI at different x-ray energies, from which the x-ray quantum efficiency, Swank factor and x-ray conversion gain were determined. Our results showed that the MTF at 5 cycles/mm for the HR type was 50% higher than for the HL. However, the HR layer produces approximately 36% less light output. The Swank factor below K-edge was 0.91 and 0.93 for the HR and HL types, respectively, thus their DQE(0) were essentially identical. The presampling MTF decreased as a function of thickness L. The universal MTF, i.e., MTF plotted as a function of the product of spatial frequency f and CsI thickness L, increased as a function of L. This indicates that the light channeling process in CsI improved the MTF of

  6. Locations of Bromide Ions in Tetragonal Lysozyme Crystals

    NASA Technical Reports Server (NTRS)

    Lim, Kap; Nadarajah, Arunan; Forsythe, Elizabeth L.; Pusey, Marc L.

    1998-01-01

    Anions have been shown to play a dominant role in the crystallization of chicken egg-white lysozyme from salt solutions. Previous studies employing X-ray crystallography have found one chloride ion binding site in the tetragonal crystal form of the protein and four nitrate ion binding sites in the monoclinic form. In this study the anion positions in the tetragonal form were determined from the difference Fourier map obtained from lysozyme crystals grown in bromide and chloride solutions. Five possible anion-binding sites were found in this manner. Some of these sites were in pockets containing basic residues while others were near neutral, but polar, residues. The sole chloride ion binding site found in previous studies was confirmed, while four further sites were found which corresponded to the four binding sites found for nitrate ions in monoclinic crystals. The study suggests that most of the anion-binding sites in lysozyme remain unchanged even when different anions and different crystal forms of lysozyme are employed.

  7. Structural and electronic properties of Diisopropylammonium bromide molecular ferroelectric crystal

    NASA Astrophysics Data System (ADS)

    Alsaad, A.; Qattan, I. A.; Ahmad, A. A.; Al-Aqtash, N.; Sabirianov, R. F.

    2015-10-01

    We report the results of ab-initio calculations based on Generalized Gradient Approximation (GGA) and hybrid functional (HSE06) of electronic band structure, density of states and partial density of states to get a deep insight into structural and electronic properties of P21 ferroelectric phase of Diisopropylammonium Bromide molecular crystal (DIPAB). We found that the optical band gap of the polar phase of DIPAB is ∼ 5 eV confirming it as a good dielectric. Examination of the density of states and partial density of states reveal that the valence band maximum is mainly composed of bromine 4p orbitals and the conduction band minimum is dominated by carbon 2p, carbon 2s, and nitrogen 2s orbitals. A unique aspect of P21 ferroelectric phase is the permanent dipole within the material. We found that P21 DIPAB has a spontaneous polarization of 22.64 consistent with recent findings which make it good candidate for the creation of ferroelectric tunneling junctions (FTJs) which have the potential to be used as memory devices.

  8. Factors affecting a cyanogen bromide-based assay of thiamin.

    PubMed

    Wyatt, D T; Lee, M; Hillman, R E

    1989-11-01

    We analyzed extensively a modified thiochrome method for thiamin analysis. Acid phosphatase (EC 3.1.3.2) from potato was superior to either alpha-amylase or acid phosphatase from wheat germ as a dephosphorylating agent. Timing of cyanogen bromide exposure was important, but the assay had good precision and accuracy. The standard curve was linear from 10 to 3000 nmol/L. The within-run and between-run coefficients of variation for total thiamin in whole blood were 3.6% and 7.4%, respectively. Analytical recoveries for low, intermediate, and high additions of thiamin to whole blood were 93-109%. Sample yield was increased by 41% (+/- 29% SD) with pre-assay freezing. Samples were stable for two days at room temperature, for seven days when refrigerated, and for two years when frozen. Previously unreported interference was seen with penicillin derivatives, and with several commonly used diuretic and antiepileptic medications. This assay may be suitable for population screening; 200 samples could be analyzed weekly at a cost of +0.20 per sample.

  9. Bioreactors for removing methyl bromide following contained fumigations

    USGS Publications Warehouse

    Miller, L.G.; Baesman, S.M.; Oremland, R.S.

    2003-01-01

    Use of methyl bromide (MeBr) as a quarantine, commodity, or structural fumigant is under scrutiny because its release to the atmosphere contributes to the depletion of stratospheric ozone. A closed-system bioreactor consisting of 0.5 L of a growing culture of a previously described bacterium, strain IMB-1, removed MeBr (> 110 ??mol L-1) from recirculating air. Strain IMB-1 grew slowly to high cell densities in the bioreactor using MeBr as its sole carbon and energy source. Bacterial oxidation of MeBr produced CO2 and hydrobromic acid (HBr), which required continuous neutralization with NaOH for the system to operate effectively. Strain IMB-1 was capable of sustained oxidation of large amounts of MeBr (170 mmol in 46 d). In an open-system bioreactor (10-L fermenter), strain IMB-1 oxidized a continuous supply of MeBr (220 ??mol L-1 in air). Growth was continuous, and 0.5 mol of MeBr was removed from the air supply in 14 d. The specific rate of MeBr oxidation was 7 ?? 10-16 mol cell-1 h-1. Bioreactors such as these can therefore be used to remove large quantities of contaminant MeBr, which opens the possibility of biodegradation as a practical means for its disposal.

  10. Bacterial oxidation of methyl bromide in Mono Lake, California

    USGS Publications Warehouse

    Connell, T.L.; Joye, S.B.; Miller, L.G.; Oremland, R.S.

    1997-01-01

    The oxidation of methyl bromide (MeBr) in the water column of Mono Lake, CA, was studied by measuring the formation of H14CO3 from [14C]MeBr. Potential oxidation was detected throughout the water column, with highest rates occurring in the epilimnion (5-12 m depth). The oxidation of MeBr was eliminated by filter-sterilization, thereby demonstrating the involvement of bacteria. Vertical profiles of MeBr activity differed from those obtained for nitrification and methane oxidation, indicating that MeBr oxidation is not simply a co-oxidation process by either nitrifiers or methanotrophs. Furthermore, specific inhibitors of methane oxidation and/or nitrification (e.g., methyl fluoride, acetylene, allyl sulfide) had no effect upon the rate of MeBr oxidation in live samples. Of a variety of potential electron donors added to Mono Lake water, only trimethylamine resulted in the stimulation of MeBr oxidation. Cumulatively, these results suggest that the oxidation of MeBr in Mono Lake waters is attributable to trimethylamine-degrading methylotrophs. Neither methyl chloride nor methanol inhibited the oxidation of [14C]MeBr in live samples, indicating that these bacteria directly oxidized MeBr rather than the products of MeBr nucleophilic substitution reactions.

  11. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices.

    PubMed

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-11-09

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55-65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2',2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m(2), while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature.

  12. Chloride, bromide and iodide scintillators with europium doping

    DOEpatents

    Zhuravleva, Mariya; Yang, Kan

    2014-08-26

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  13. Water-lithium bromide double-effect absorption cooling analysis

    NASA Astrophysics Data System (ADS)

    Vliet, G. C.; Lawson, M. B.; Lithgow, R. A.

    1980-12-01

    A numerical model was developed for the transient simulation of the double-effect, water-lithium bromide absorption cooling machine and was used to determine the effect of the various design and input variables on the absorption unit performance. The performance parameters considered were coefficient of performance and cooling capacity. The variables considered include source hot water, cooling water, and chilled water temperatures; source hot water, cooling water, and chilled water flow rates; solution circulation rate; heat exchanger areas; pressure drop between evaporator and absorber; solution pump characteristics; and refrigerant flow control methods. The performance sensitivity study indicates that the distribution of heat exchanger area among the various (seven) heat exchange components is a very important design consideration. Moreover, it indicated that the method of flow control of the first effect refrigerant vapor through the second effect is a critical design feature when absorption units operate over a significant range of cooling capacity. The model was used to predict the performance of the Trane absorption unit with fairly good accuracy.

  14. [Treatment of cetyltrimethyl ammonium bromide wastewater by potassium ferrate].

    PubMed

    Yang, Wei-hua; Wang, Hong-hui; Zeng, Xiao-xu; Huang, Ting-ting

    2009-08-15

    A novel oxidant potassium ferrate (K2FeO4) was used to remove cetyltrimethyl ammonium bromide (CTAB) at room temperature. The effects of various conditions on the removal ratio, such as reaction time, dosing quantity of K2FeO4 and initial pH, were investigated. The experiments results show that the removal ratio reaches 79.4% when the reaction time is 30 min, the dosing quantity of K2FeO4 to CTAB is 1:1, the initial pH of the solution is 7. In the reaction progress, the oxidation of K2FeO4 and the flocculation of the reduction product have synergistic effect on the removal of CTAB. In addition, infrared spectra of CTAB before and after being treated with K2FeO4 were further studied. The results indicate that the degradation process involves the interruption of chain and the subsequent mineralization to inorganic molecules. Furthermore, the reaction of K2FeO4 and CTAB follows second order kinetics law.

  15. Reactive films for mitigating methyl bromide emissions from fumigated soil.

    PubMed

    Xuan, Richeng; Ashworth, Daniel J; Luo, Lifang; Yates, Scott R

    2011-03-15

    Emissions of methyl bromide (MeBr) from agricultural fumigation can lead to depletion of the stratospheric ozone layer, and so its use is being phased out. However, as MeBr is still widely used under Critical Use Exemptions, strategies are still required to control such emissions. In this work, novel reactive films (RFs) were designed and their efficacy in limiting loss of MeBr from soil was tested. A reactive layer, containing dry ammonium thiosulfate (ATS), was sandwiched between two layers of plastic film, the lower layer being HDPE (high-density polyethylene film, which is permeable to MeBr) and the upper layer HDPE or VIF (virtually impermeable film). MeBr diffusion through, and transformation by, the RFs were tested in a stainless-steel permeability cell. Although ineffective when dry, the RFs substantially depleted MeBr when activated with water to produce ATS solution. MeBr half-life (t(1/2)) was around 9.0 h at 20 °C in the presence of activated RF, and was sensitive to temperature (t(1/2) 15.7 and 2.9 h at 10 and 40 °C, respectively). When the upper film layer was VIF, less than 0.15% of the added MeBr diffused through the film, with the remainder being transformed within the reactive layer. These findings indicate that such films have good potential to reduce MeBr loss from fumigated soils to the atmosphere.

  16. Evaluation of Alkali Bromide Salts for Potential Pyrochemical Applications

    SciTech Connect

    Prabhat K. Tripathy; Steven D. Herrmann; Guy L. Fredrickson; Tedd E. Lister; Toni Y. Gutknecht

    2013-10-01

    Transient techniques were employed to study the electrochemical behavior, reduction mechanism and transport properties of REBr3 (RE - La, Nd and Gd) in pure LiBr, LiBr-KBr (eutectic) and LiBr-KBr-CsBr (eutectic) melts. Gd(III) showed a reversible single step soluble-insoluble exchange phenomenon in LiBr melt at 973K. Although La (III), Nd(III) and Gd(III) ions showed reversible behavior in eutectic LiBr-KBr melts, these ions showed a combination of temperature dependent reversible and pseudo-reversible behavior. While both La(III) and Gd(III) showed one step reduction, the reduction of Nd(III) was observed to be a two step process. La metal could be electrodeposited from the ternary electrolyte at a temperature of 673K. Various electrochemical measurements suggest that both binary and ternary bromide melts can potentially be used to electrodeposit high purity RE metals at comparatively lower operating temperatures.

  17. Associated anisotropy decays of ethidium bromide interacting with DNA

    NASA Astrophysics Data System (ADS)

    Chib, Rahul; Raut, Sangram; Sabnis, Sarika; Singhal, Preeti; Gryczynski, Zygmunt; Gryczynski, Ignacy

    2014-03-01

    Ethidium Bromide (EB) is a commonly used dye in a deoxyribonucleic acid (DNA) study. Upon an intercalation, this dye significantly increases its brightness and fluorescence lifetime. In this report we have studied the time resolved fluorescence properties of EB existing simultaneously in free and DNA-bound forms in the solution. Fluorescence intensity decays were fitted globally to a double exponential model with lifetimes corresponding to free (1.6 ns) and bound (22 ns) forms, and molar fractions were determined for all used solutions. Anisotropy decays displayed characteristic time dependence with an initial rapid decline followed by recovery and slow decay. The short-lived fraction associated with free EB molecules decreases faster than long-lived fraction associated with EB bound to DNA. Consequently, contribution from fast rotation leads to initial rapid decay in anisotropy. On the other hand bound fraction, due to slow rotation helps recover anisotropy in time. This effect of associated anisotropy decays in systems such as EB free/EB-DNA is clearly visible in a wide range of concentrations, and should be taken into account in polarization assays and biomolecule dynamics studies.

  18. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices

    PubMed Central

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S.; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-01-01

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55–65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2′,2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m2, while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature. PMID:27827424

  19. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices

    NASA Astrophysics Data System (ADS)

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S.; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-11-01

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55–65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2‧,2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m2, while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature.

  20. Foliar uptake of cesium, iodine and strontium and their transfer to the edible parts of beans, potatoes and radishes

    NASA Astrophysics Data System (ADS)

    Oestling, O.; Kopp, P.; Burkart, W.

    Considerable fractions of radionuclide solutions deposited on the surface of the leaves may be transferred to the edible parts of plants. In radishes we observed a transfer of more than 40% of the applied cesium radioisotope within a few days. A rather similar uptake was found for beans and potatoes when harvested a month after application of radioactivity. As much as 60% of the applied cesium-isotope remained in (or on) the potato leaves even 8 days after application. The major part could however be washed off the leaves a few hours after application. When radishes were showered with water within 7 h after the application of activity the uptake was greatly reduced. No competitive effect of potassium chloride for the foliar uptake of cesium was found. A 10 -2 M colloidal suspension of Prussian Blue, a chelating agent for monovalent alkali metals such as potassium, cesium, or other monovalent cations, applied as droplets to the leaves one day prior to application of active cesium was found to strongly inhibit the transfer of cesium to the radish. The transfer of iodine and strontium to the edible parts was found to be negligible (or slower) as compared to cesium. In most cases no detectable amounts of these two nuclides were transfered to the edible parts of the radish after 2-5 weeks.

  1. Extraction of Cesium by a Calix[4]arene-Crown-6 Ether Bearing a Pendant amine Group

    SciTech Connect

    Harmon, Ben; Ensor, Dale; Delmau, Laetitia Helene; Moyer, Bruce A

    2007-01-01

    The goal of this work was to evaluate the role of the amino group of 5-aminomethylcalix[4]arene-[bis-4-(2-ethylhexyl)benzo-crown-6] (AMBEHB) in the extraction of cesium from acidic and basic mixtures of sodium nitrate and other concentrated salts. The extraction of cesium from nitrate media was measured as a function of extractant concentration, nitrate concentration, cesium concentration, and pH over the range 1-13. The initial studies showed a moderate decrease in the extraction of cesium in acidic media, which indicated the binding of cesium by the calixarene-crown was weakened by the protonation of the amine group. The results also indicated that a 1:1:1 Cs-ligand-nitrate complex is formed in the organic phase. To further evaluate AMBEHB, the empirical data were mathematically modeled to determine the formation constants of the complexes formed in the organic phase. The resulting formation constants showed that the attachment of the amine group to the calixarene-crown molecule reduced the binding stability for the cesium ion upon contact with an acidic solution. This supports the hypothesis of charge repulsion as the basis for more efficient stripping of cesium via pH-switching.

  2. Cyclotron production of cesium radionuclides as analogues for francium-221 biodistribution

    NASA Astrophysics Data System (ADS)

    Finn, R.; McDevitt, M.; Sheh, Y.; Lom, C.; Qiao, J.; Cai, S.; Burnazi, E.; Nacca, A.; Pillarsetty, N.; Jaggi, J.; Scheinberg, D.

    2005-12-01

    In our clinical investigations focussing on improved therapeutic treatment of specific tumors we have concentrated on a targeted therapy approach utilizing designed radiolabeled monoclonal antibodies as the cytotoxic reagent. The physical characteristics of the alpha particle emitting radionuclide bismuth-213 including the short half-life of 45.6 min, has shown promise for the treatment of specific cancers such as leukemias and lymphomas or micrometastatic carcinomas. In an effort to increase the cytocidal effect of the HuM195, a humanized monoclonal antibody carrier to the CD33 antigen expressed on leukemia cells, our focus is directed toward an "internal" nano-generator composed of Ac-225 radionuclide, the parent of the bismuth-213. The actinium-225 radionuclide decays through several short-lived, alpha emitting daughters including francium-221, astatine-217 and bismuth-213. In order to study the biodistribution and the pharmacokinetics of the individual daughter nuclide, francium-221, the cyclotron production and separation of cesium radionuclides, specifically cesium-132, from a natural xenon gas target was undertaken. The choice of cesium as an analogue for francium was predicated upon both elements being in Group 1A alkali metals and cesium radionuclide possesses a sufficient half-life to allow biodistribution studies to be performed. The preliminary experimental results of this investigation are presented.

  3. Evaluation of Factors Affecting Cesium Extraction Performance by Calix[4]Arene Derivatives

    SciTech Connect

    Rumppe, J.L.; Delmau, L.

    2004-01-01

    Novel aza-crown derivatives of dioctyloxy-calix[4]arene crown-6 were examined for their cesium extraction performance at different pH levels. These studies are of interest in addressing high-level waste tank remediation and the removal of 137Cs, a major contributor to heat and radiation generation. Preliminary studies were done to assess the performance of these calixarene compounds under varying conditions. Results showed an increase of cesium extraction with pH as well as expected trends in diluent effects and anion selectivity. Poor extraction performance of some aza-crown derivatives raised questions regarding the possibility of intramolecular hydrogen-bonding. A novel methylated derivative was used to address these questions. Additional experiments were conducted to determine the extraction effect on pH. Results indicate an increase in cesium extraction with pH, as shown in preliminary studies. Mono-aza derivatives were shown to exhibit better cesium extraction performance than their di-aza counterparts. The methylated derivative showed poorer extraction performance than the non-methylated derivative, indicating that completely removing the possibility of intramolecular hydrogen-bonding has negative effects on extraction performance. This suggests that the hydrogen-bonding facilitates anion co-extraction, which would lead to better overall extraction. Mono-aza derivatives were shown to cause unexpected changes in pH. This could possibly be attributed to protonation of the calix crown.

  4. Redox potentials of uranium in molten eutectic mixture of lithium, potassium, and cesium chlorides

    NASA Astrophysics Data System (ADS)

    Maltsev, D. S.; Volkovich, V. A.; Vasin, B. D.

    2016-08-01

    The behavior of uranium(III) and (IV) ions in the melts based on the eutectic mixture of lithium, potassium, and cesium chlorides has been studied using cyclic voltammetry in the range of 573-1073 K. The red-ox potentials of uranium have been determined and formal standard E U(III)/U(IV)* red-ox potentials have been calculated.

  5. Assessment of commercially available ion exchange materials for cesium removal from highly alkaline wastes

    SciTech Connect

    Brooks, K.P.; Kim, A.Y.; Kurath, D.E.

    1996-04-01

    Approximately 61 million gallons of nuclear waste generated in plutonium production, radionuclide removal campaigns, and research and development activities is stored on the Department of Energy`s Hanford Site, near Richland, Washington. Although the pretreatment process and disposal requirements are still being defined, most pretreatment scenarios include removal of cesium from the aqueous streams. In many cases, after cesium is removed, the dissolved salt cakes and supernates can be disposed of as LLW. Ion exchange has been a leading candidate for this separation. Ion exchange systems have the advantage of simplicity of equipment and operation and provide many theoretical stages in a small space. The organic ion exchange material Duolite{trademark} CS-100 has been selected as the baseline exchanger for conceptual design of the Initial Pretreatment Module (IPM). Use of CS-100 was chosen because it is considered a conservative, technologically feasible approach. During FY 96, final resin down-selection will occur for IPM Title 1 design. Alternate ion exchange materials for cesium exchange will be considered at that time. The purpose of this report is to conduct a search for commercially available ion exchange materials which could potentially replace CS-100. This report will provide where possible a comparison of these resin in their ability to remove low concentrations of cesium from highly alkaline solutions. Materials which show promise can be studied further, while less encouraging resins can be eliminated from consideration.

  6. Actively cooled plasma electrode for long pulse operations in a cesium-seeded negative ion source

    NASA Astrophysics Data System (ADS)

    Fujiwara, Yukio; Watanabe, Kazuhiro; Okumura, Yoshikazu; Trainham, Rusty; Jacquot, Claude

    2005-01-01

    An actively cooled plasma electrode has been developed for long pulse operation in a cesium-seeded negative ion source. To keep the electrode temperature at about 300°C, which is the optimum range of temperature to enhance cesium effects, the electrode cooling structure has been designed using three-dimensional numerical simulation assuming that the heat flux from the source plasma was 15W/cm2. Water cooling tubes were brazed to the plasma electrode substrate with spacers made of stainless steel, which acts as a thermal resistance. The fabricated plasma electrode has been tested in a cesium-seeded volume negative ion source called Kamaboko source. The temperature of the electrode reached 280°C for the arc power of 41kW, which is the operating condition required for producing D- beams with current densities exceeding 20mA/cm2. It was demonstrated that the actively cooled plasma electrode is applicable to long pulse operations, meeting the temperature requirement for optimizing the surface-production process of negative ions in the cesium-seeded ion source.

  7. Spatial variability and the fate of cesium in coastal sediments near Fukushima, Japan

    NASA Astrophysics Data System (ADS)

    Black, E.; Buesseler, K. O.

    2014-05-01

    Quantifying the amount of cesium incorporated into marine sediments as a result of the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident has proven challenging due to the limited multi-core sampling from within the 30 km zone around the facility, the inherent spatial heterogeneities in ocean sediments, and the potential for inventory fluctuations due to physical, biological, and chemical processes. Using 210Pb, 234Th, 137Cs, and 134Cs profiles from 20 sediment cores, coastal sediment inventories were reevaluated. A minimum 137Cs sediment inventory of 100 ± 50 TBq was found for an area of 55 000 km2 using cores from this study and a total of 130 ± 60 TBq using an additional 181 samples. These inventories represent less than 1% of the estimated 15-30 PBq of cesium released during the FDNPP disaster and constitute ~ 90% of the total coastal inventory of 137Cs remaining in 2012. The time needed for surface sediment activities (0 to 3 cm) at the 20 locations to reduce by 50% via bioturbation was estimated to range from 0.4 to 26 years, indicating a much greater persistence of cesium in the sediments relative to coastal water activities. However, due to the observed variability in mixing rates, grain size, and inventories, additional cores are needed to further improve estimates and capture the full extent of cesium penetration into the shallow coastal sediments, which was deeper than 14 cm for all cores retrieved from water depths less than 150 m.

  8. HIGH TEMPERATURE SORPTION OF CESIUM AND STRONTIUM ON DISPERSED KAOLINITE POWDERS

    EPA Science Inventory

    Sorption of cesium and strontium on kaolinite powders was investigated as a means to minimize the emissions of these metals during certain high-temperature processes currently being developed to isolate and dispose of radiological and mixed wastes. In this work, nonradioactive aq...

  9. Cesium 137-Its applications for understanding soil redistribution and deposition patterns on the landscape

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the 1960s research began on the application of fallout radionuclides to determine sediment deposition and soil redistribution rates and patterns in agricultural and natural ecosystems. This research was based on the use of fallout 137Cesium (137Cs) from nuclear weapon tests deposited worldwide d...

  10. Overview of active cesium contamination of freshwater fish in Fukushima and Eastern Japan

    PubMed Central

    Mizuno, Toshiaki; Kubo, Hideya

    2013-01-01

    This paper focuses on an overview of radioactive cesium 137 (quasi-Cs137 included Cs134) contamination of freshwater fish in Fukushima and eastern Japan based on the data published by the Fisheries Agency of the Japanese Government in 2011. In the area north and west of the Fukushima Nuclear plant, freshwater fish have been highly contaminated. For example, the mean of active cesium (quasi-Cs137) contamination of Ayu (Plecoglossus altivelis) is 2,657 Bq/kg at Mano River, 20–40 km north-west from the plant. Bioaccumulation is observed in the Agano river basin in Aizu sub-region, 70–150 km west from the plant. The active cesium (quasi-Cs137) contamination of carnivorous Salmondae is around 2 times higher than herbivorous Ayu. The extent of active cesium (quasi-Cs137) contamination of Ayu is observed in the entire eastern Japan. The some level of the contamination is recognized even in Shizuoka prefecture, 400 km south-west from the plant. PMID:23625055

  11. Influence of dissolved sodium and cesium on uranyl oxide hydrate solubility.

    PubMed

    Giammar, Daniel E; Hering, Janet G

    2004-01-01

    The solubility of uranium-containing minerals can control the mobility of uranium in contaminated soil and groundwater. The identity and solubility of these minerals are strongly influenced by solution composition. The influence of dissolved sodium and cesium on the solubility of uranyl oxide hydrates has been investigated in a series of batch experiments conducted with synthetic metaschoepite ((UO2)8O2(OH)12 x 10H2O). During reaction of metaschoepite in NaNO3, CsNO3, and NaF solutions, an initial increase in the dissolved uranium concentration was followed by a decrease as uranium was incorporated into a secondary solid phase. Given sufficient reaction time, metaschoepite was completely transformed to a clarkeite-like sodium uranyl oxide hydrate or a cesium uranyl oxide hydrate that has not previously been described. These secondary solid phases exhibited X-ray diffraction patterns and Raman spectra that were distinct from those of the original metaschoepite. Dissolved uranium concentrations in equilibrium with the sodium and cesium uranyl oxide hydrates can be more than 2 orders of magnitude lower than those in equilibrium with metaschoepite. Initial changes in metaschoepite solubility may also result from particle growth induced by sodium and cesium incorporation into the solid phase.

  12. Cesium-137-A tool for understanding soil redistribution across the landscape

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In 1968 research began at the USDA ARS Sedimentation Laboratory on the application of fallout radionuclides to determine sediment deposition and soil redistribution rates and patterns in agricultural and natural ecosystems. This research was based on the use of fallout Cesium -137(Cs-137) from nucl...

  13. Using Radioactive Fallout Cesium (137Cs) to Distinguish Sediment Sources in an Agricultural Watershed

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Radioactive fallout Cesium (Cs-137) has been used for quantifying sources of accumulating sediment in water bodies and to determine the rates and pattern of soil erosion. The objectives of this research are to use Cs-137 as a tracer to determine patterns of soil erosion and deposition of eroding soi...

  14. Using fallout Cesium-137 to understand soil redistribution over agricultural landscapes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    While it is recognized that soil erosion is highly variable in space and time, studies of the redistribution of soil within a field or watershed are limited. Our studies focus on the use of fallout Cesium-137 to understand pattern of soil movement on the landscape. It is often assumed that eroding...

  15. Using Fallout Cesium-137 to understand soil redistribution over agricultural landscapes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    While it is recognized that soil erosion is highly variable in space and time, studies of the redistribution of soil and soil organic carbon (SOC) within a field or watershed are limited. Our studies focus on the use of fallout Cesium-137 to understand pattern of soil and SOC movement on the landsca...

  16. Adsorption characteristics of sol gel-derived zirconia for cesium ions from aqueous solutions.

    PubMed

    Yakout, Sobhy M; Hassan, Hisham S

    2014-07-01

    Zirconia powder was synthesized via a sol gel method and placed in a batch reactor for cesium removal investigation. X-ray analysis and Fourier transform infrared spectroscopy were utilized for the evaluation of the developed adsorbent. The adsorption process has been investigated as a function of pH, contact time and temperature. The adsorption is strongly dependent on the pH of the medium whereby the removal efficiency increases as the pH turns to the alkaline range. The process was initially very fast and the maximum adsorption was attained within 60 min of contact. A pseudo-second-order model and homogeneous particle diffusion model (HPDM) were found to be the best to correlate the diffusion of cesium into the zirconia particles. Furthermore, adsorption thermodynamic parameters, namely the standard enthalpy, entropy, and Gibbs free energy, were calculated. The results indicate that cesium adsorption by zirconia is an endothermic (ΔH>0) process and good affinity of cesium ions towards the sorbent (ΔS>0) was observed.

  17. Physical barrier effect of geopolymeric waste form on diffusivity of cesium and strontium.

    PubMed

    Jang, J G; Park, S M; Lee, H K

    2016-11-15

    The present study investigates the physical barrier effect of geopolymeric waste form on leaching behavior of cesium and strontium. Fly ash-based geopolymers and slag-blended geopolymers were used as solidification agents. The leaching behavior of cesium and strontium from geopolymers was evaluated in accordance with ANSI/ANS-16.1. The diffusivity of cesium and strontium in a fly ash-based geopolymer was lower than that in Portland cement by a factor of 10(3) and 10(4), respectively, showing significantly improved immobilization performance. The leaching resistance of fly ash-based geopolymer was relatively constant regardless of the type of fly ash. The diffusivity of water-soluble cesium and strontium ions were highly correlated with the critical pore diameter of the binder. The critical pore diameter of the fly ash-based geopolymer was remarkably smaller than those of Portland cement and slag-blended geopolymer; consequently, its ability physically to retard the diffusion of nuclides (physical barrier effect) was superior.

  18. Biosorption of cesium by native and chemically modified biomass of marine algae: introduce the new biosorbents for biotechnology applications.

    PubMed

    Jalali-Rad, R; Ghafourian, H; Asef, Y; Dalir, S T; Sahafipour, M H; Gharanjik, B M

    2004-12-10

    Biosorption batch experiments were conducted to determine the cesium binding ability of native biomass and chemically modified biosorbents derived from marine algae, namely ferrocyanide algal sorbents type 1 and type 2 (FASs1 and FASs2). The applicability of the Langmuir and Freundlich isotherms for representation of the experimental data was investigated. The cesium sorption performances of the various types of sorbents were compared using the maximum capacities (qmax values) obtained from fitting the Langmuir isotherm to the values calculated from the sorption experiments, which FASs type 1 and type 2 showed better sorption performances for cesium. FASs1 and FASs2 derived from formaldehyde and glutaraldehyde crosslinked Padina australis exhibited lower sorption capacities than those prepared from the non-crosslinked one. Most of the cesium ions were bound to FASs1, derived from Sargassum glaucescens and P. australis, in < 2 min and equilibrium reached within the first 30 min of contact. Biosorption of cesium by FASs1 derived from P. australis and Cystoseria indica was constantly occurred at a wide range of pH, between 1 and 10, and the highest removal took place at pH 4. The presence of sodium and potassium at 0.5 and 1mM did not inhibit cesium biosorption by algae biomass. The maximum cesium uptake was acquired using the large particles of FAS2 originated from S. glaucescens (2-4 mm). Desorption of cesium from the metal-laden FASs1 (from P. australis, S. glaucescens and Dictyota indica) was completely achieved applying 0.5 and 1 M NaOH and KOH, although the cesium sorption capacity of the biosorbents (from C. indica and S. glaucescens) decreased by 46-51% after 9 sorption-desorption cycles.

  19. Preparation and characterization of cesium-137 aluminosilicate pellets for radioactive source applications

    SciTech Connect

    Schultz, F.J.; Tompkins, J.A.; Haff, K.W.; Case, F.N.

    1981-07-01

    Twenty-seven fully loaded /sup 137/Cs aluminosilicate pellets were fabricated in a hot cell by the vacuum hot pressing of a cesium carbonate/montmorillonite clay mixture at 1500/sup 0/C and 570 psig. Four pellets were selected for characterization studies which included calorimetric measurements, metallography, scanning electron microscope and electron backscattering (SEM-BSE), electron microprobe, x-ray diffraction, and cesium ion leachability measurements. Each test pellet contained 437 to 450 curies of /sup 137/Cs as determined by calorimetric measurements. Metallographic examinations revealed a two-phase system: a primary, granular, gray matrix phase containing large and small pores and small pore agglomerations, and a secondary fused phase interspersed throughout the gray matrix. SEM-BSE analyses showed that cesium and silicon were uniformly distributed throughout both phases of the pellet. This indicated that the cesium-silicon-clay reaction went to completion. Aluminum homogeneity was unconfirmed due to the high background noise associated with the inherent radioactivity of the test specimens. X-ray diffraction analyses of both radioactive and non-radioactive aluminosilicate pellets confirmed the crystal lattice structure to be pollucite. Cesium ion quasistatic leachability measurements determined the leach rates of fully loaded /sup 137/Cs sectioned pollucite pellets to date to be 4.61 to 34.4 x 10/sup -10/ kg m/sup -2/s/sup -1/, while static leach tests performed on unsectioned fully loaded pellets showed the leach rates of the cesium ion to date to be 2.25 to 3.41 x 10/sup -12/ kg m/sup -2/s/sup -1/. The cesium ion diffusion coefficients through the pollucite pellet were calculated using Fick's first and second laws of diffusion. The diffusion coefficients calculated for three tracer level /sup 137/Cs aluminosilicate pellets were 1.29 x 10/sup -16/m/sup 2/s/sup -1/, 6.88 x 10/sup -17/m/sup 2/s/sup -1/, and 1.35 x 10/sup -17/m/sup 2/s/sup -1/, respectively.

  20. A comparison of the cesium and hydrogen hyperfine frequencies by means of Loran-C and portable clocks

    NASA Technical Reports Server (NTRS)

    Reinhardt, V. S.; Lavanceau, J.

    1974-01-01

    A comparison of the hydrogen and cesium hyperfine frequencies is made using a hydrogen maser calibrated directly against the Flexible Bulb Large Storage Box Hydrogen Maser and a Hewlett-Packard portable high performance cesium clock calibrated indirectly against the USNO Master Clock via a Loran-C link. The portable cesium clock is transported from the USNO to Harvard University in operating condition. This allows the evaluation of the portable clock's performance under transport. Data are presented on the epoch and frequency stability of the portable clock under transport as well as the usefulness of a closure measurement in determining clock drift.