Methyl bromide as a building disinfectant: interaction with indoor materials and resulting byproduct formation.

PubMed

Corsi, Richard L; Walker, Matthew B; Liljestrand, Howard M; Hubbard, Heidi F; Poppendieck, Dustin G

2007-05-01

Several buildings were contaminated with Bacillus anthracis in the fall of 2001. These events required consideration of how to disinfect large indoor spaces for continued worker occupation. The interactions of gaseous disinfectants with indoor materials may inhibit the disinfection process, cause persistence of the disinfectant, and lead to possible byproduct formation and persistence. Methyl bromide (CH3Br) is a candidate for disinfection/deactivation of biological agents in buildings. In this study, 24 indoor materials were exposed to CH3Br for 16 hr at concentrations ranging from 100 to 2500 ppm in 48-L electropolished stainless steel chambers. CH3Br concentrations were measured during and after disinfection. Its interactions with materials were observed to be small, with nearly complete and rapid desorption. Between 3% and 8% of CH3Br adsorbed to four materials (office partition, ceiling tile, particle-board, and gypsum wallboard with satin paint), and the degree of adsorption decreased with increasing relative humidity. The percentage of adsorption to all other materials was <2%. This result suggests that when designing disinfection events with CH3Br, loss to indoor materials can be neglected in terms of disinfectant dose calculations. Possible reaction products were identified and/or quantified before and after exposure to CH3Br. Several monomethylated and dimethylated aliphatic compounds were observed in chamber air at low concentrations after the exposures of six materials to CH3Br. Concentration increases also occurred for chemicals that were observed to naturally off-gas from materials before exposure to CH3Br, suggesting that CH3Br may play a role in enhancing the natural off-gassing of chemicals, for example, by competitive displacement of compounds that already existed in the materials. The results described in this paper should facilitate the design of building disinfection systems involving CH3Br.

Continuous flow stable isotope methods for study of δ13C fractionation during halomethane production and degradation

USGS Publications Warehouse

Kalin, Robert M.; Hamilton, John T.G.; Harper, David B.; Miller, Laurence G.; Lamb, Clare; Kennedy, James T.; Downey, Angela; McCauley, Sean; Goldstein, Allen H.

2001-01-01

Gas chromatography/mass spectrometry/isotope ratio mass spectrometry (GC/MS/IRMS) methods for δ13C measurement of the halomethanes CH3Cl, CH3Br, CH3I and methanethiol (CH3SH) during studies of their biological production, biological degradation, and abiotic reactions are presented. Optimisation of gas chromatographic parameters allowed the identification and quantification of CO2, O2, CH3Cl, CH3Br, CH3I and CH3SH from a single sample, and also the concurrent measurement of δ13C for each of the halomethanes and methanethiol. Precision of δ13C measurements for halomethane standards decreased (±0.3, ±0.5 and ±1.3‰) with increasing mass (CH3Cl, CH3Br, CH3I, respectively). Given that carbon isotope effects during biological production, biological degradation and some chemical (abiotic) reactions can be as much as 100‰, stable isotope analysis offers a precise method to study the global sources and sinks of these halogenated compounds that are of considerable importance to our understanding of stratospheric ozone destruction. 

Marine bacterial degradation of brominated methanes

USGS Publications Warehouse

Goodwin, K.D.; Lidstrom, M.E.; Oremland, R.S.

1997-01-01

Brominated methanes are ozone-depleting compounds whose natural sources include marine algae such as kelp. Brominated methane degradation by bacteria was investigated to address whether bacterial processes might effect net emission of these compounds to the atmosphere. Bacteria in seawater collected from California kelp beds degraded CH2Br2 but not CHBr3. Specific inhibitors showed that methanotrophs and nitrifiers did not significantly contribute to CH2Br2 removal. A seawater enrichment culture oxidized 14CH2Br2 to 14CO2 as well as 14CH3Br to 14CO2. The rates of CH2Br2 degradation in laboratory experiments suggest that bacterial degradation of CH2Br2 in a kelp bed accounts for <1% of the CH2Br2 produced by the kelp. However, the half-life of CH2Br2 due to bacterial removal appears faster than hydrolysis and within an order of magnitude of volatilization to the atmosphere.Brominated methanes are ozone-depleting compounds whose natural sources include marine algae such as kelp. Brominated methane degradation by bacteria was investigated to address whether bacterial processes might effect net emission of these compounds to the atmosphere. Bacteria in seawater collected from California kelp beds degraded CH2Br2 but not CHBr3. Specific inhibitors showed that methanotrophs and nitrifiers did not significantly contribute to CH2Br2 removal. A seawater enrichment culture oxidized 14CH2Br2 to 14CO2 as well as 14CH3Br to 14CO2. The rates of CH2Br2 degradation in laboratory experiments suggest that bacterial degradation of CH2Br2 in a kelp bed accounts for <1% of the CH2Br2 produced by the kelp. However, the half-life of CH2Br2 due to bacterial removal appears faster than hydrolysis and within an order of magnitude of volatilization to the atmosphere.

Encapsulation of CH3NH3PbBr3 Perovskite Quantum Dots in MOF-5 Microcrystals as a Stable Platform for Temperature and Aqueous Heavy Metal Ion Detection.

PubMed

Zhang, Diwei; Xu, Yan; Liu, Quanlin; Xia, Zhiguo

2018-04-16

The stability issue of organometallic halide perovskites remains a great challenge for future research as to their applicability in different functional material fields. Herein, a novel and facile two-step synthesis procedure is reported for encapsulation of CH 3 NH 3 PbBr 3 perovskite quantum dots (QDs) in MOF-5 microcrystals, where PbBr 2 and CH 3 NH 3 Br precursors are added stepwise to fabricate stable CH 3 NH 3 PbBr 3 @MOF-5 composites. In comparison to CH 3 NH 3 PbBr 3 QDs, CH 3 NH 3 PbBr 3 @MOF-5 composites exhibited highly improved water resistance and thermal stability, as well as better pH adaptability over a wide range. Luminescent investigations demonstrate that CH 3 NH 3 PbBr 3 @MOF-5 composites not only featured excellent sensing properties with respect to temperature changes from 30 to 230 °C but also exhibited significant selective luminescent response to several different metal ions in aqueous solution. These outstanding characteristics indicate that the stable CH 3 NH 3 PbBr 3 @MOF-5 composites are potentially interesting for application in fluorescence sensors or detectors.

Spatial and temporal distributions of bromoform and dibromomethane in the Atlantic Ocean and their relationship with photosynthetic biomass

NASA Astrophysics Data System (ADS)

Liu, Yina; Yvon-Lewis, Shari A.; Thornton, Daniel C. O.; Butler, James H.; Bianchi, Thomas S.; Campbell, Lisa; Hu, Lei; Smith, Richard W.

2013-08-01

Atmospheric mixing ratios and seawater concentrations of bromoform (CHBr3), dibromomethane (CH2Br2), and other brominated very short-lived substances (BrVSLS) were measured during five cruises from 1994 to 2010. These cruises were conducted over large latitudinal (62°N-60°S) and longitudinal transects (11°W-86°W) in the Atlantic Ocean. Elevated seawater concentrations of CHBr3 and CH2Br2 were often observed in regions where chlorophyll a concentrations were also elevated, which suggests biogeochemical processes associated with photosynthetic biomass may be related to CHBr3 and CH2Br2 production. Our results suggest that, at least in the open ocean, several phytoplankton taxa may contribute to the production of these trace gases. While observed correlations between CHBr3 and CH2Br2 in different regions are usually interpreted as common sources for these compounds, results in this study suggest different biogeochemical processes may contribute separately to the production of these trace gases. Heterotrophic bacterial abundance was significantly correlated with CH2Br2, but not with CHBr3, which suggests the biogeochemical processes associated with heterotrophic bacteria may be related to CH2Br2 in seawater but probably not to CHBr3. In general, the Atlantic Ocean is a net source for CHBr3 and CH2Br2, except for a few locations where these trace gases were undersaturated in seawater. Assuming fluxes measured in the Atlantic open ocean are globally representative, the resulting extrapolated, global open-ocean annual net sea-to-air fluxes calculated from data from the five cruises was estimated at 0.24-3.80 Gmol Br yr-1 for CHBr3 and 0.11-0.77 Gmol Br yr-1 for CH2Br2.

Understanding the insight into the mechanisms and dynamics of the Cl-initiated oxidation of (CH3)3CC(O)X and the subsequent reactions in the presence of NO and O2 (X = F, Cl, and Br).

PubMed

Bai, Feng-Yang; Lv, Shuang; Ma, Yuan; Liu, Chun-Yu; He, Chun-Fang; Pan, Xiu-Mei

2017-03-01

In this work, the density functional and high-level ab initio theories are adopted to investigate the mechanisms and kinetics of reaction of (CH 3 ) 3 CC(O)X (X = F, Cl, and Br) with atomic chlorine. Rate coefficients for the reactions of chlorine atom with (CH 3 ) 3 CC(O)F (k 1 ), (CH 3 ) 3 CC(O)Cl (k 2 ), and (CH 3 ) 3 CC(O)Br (k 3 ) are calculated using canonical variational transition state theory coupled with small curvature tunneling method over a wide range of temperatures from 250 to 1000 K. The dynamic calculations are performed by the variational transition state theory with the interpolated single-point energies method at the CCSD(T)/aug-cc-pVDZ//B3LYP/6-311++G(d,p) level of theory. Computed rate constant is in good line with the available experimental value. The rate constants for the title reactions are in this order: k 1

GTE_TRACEP_P3B Parameters 1

Atmospheric Science Data Center

2013-02-19

... Methyl bromide (CH3Br) Bromopropane (C3H7 Br) Methyl Chloride (CH3Cl) Ethyl Chloride (C2H5Cl) Vinyl chloride (C2H3Cl) ... Trichloroethylene (C2HCl3) Tetrachloroethylene (C2Cl4) Methylene bromide (CH2Br2) Chlorodibromomethane (CHClBr2) Bromoform ...

Modulated CH3NH3PbI3−xBrx film for efficient perovskite solar cells exceeding 18%

PubMed Central

Tu, Yongguang; Wu, Jihuai; Lan, Zhang; He, Xin; Dong, Jia; Jia, Jinbiao; Guo, Panfeng; Lin, Jianming; Huang, Miaoliang; Huang, Yunfang

2017-01-01

The organic-inorganic lead halide perovskite layer is a crucial factor for the high performance perovskite solar cell (PSC). We introduce CH3NH3Br in the precursor solution to prepare CH3NH3PbI3−xBrx hybrid perovskite, and an uniform perovskite layer with improved crystallinity and apparent grain contour is obtained, resulting in the significant improvement of photovoltaic performance of PSCs. The effects of CH3NH3Br on the perovskite morphology, crystallinity, absorption property, charge carrier dynamics and device characteristics are discussed, and the improvement of open circuit voltage of the device depended on Br doping is confirmed. Based on above, the device based on CH3NH3PbI2.86Br0.14 exhibits a champion power conversion efficiency (PCE) of 18.02%. This study represents an efficient method for high-performance perovskite solar cell by modulating CH3NH3PbI3−xBrx film. PMID:28303938

GTE_TRACEP_DC8 Parameters 4

Atmospheric Science Data Center

2013-02-18

... Methyl bromide (CH3Br) Bromopropane (C3H7Br) Methyl Chloride(CH3Cl) Ethyl Chloride (C2H5Cl) Vinyl chloride (C2H3Cl) ... Trichloroethylene (C2HCl3) Tetrachloroethylene (C2Cl4) Methylene bromide (CH2Br2) Chlorodibromomethane(CHClBr2) Bromoform ...

Colloidal Synthesis of CH3 NH3 PbBr3 Nanoplatelets with Polarized Emission through Self-Organization.

PubMed

Liu, Lige; Huang, Sheng; Pan, Longfei; Shi, Li-Jie; Zou, Bingsuo; Deng, Luogen; Zhong, Haizheng

2017-02-06

We report a combined experimental and theoretical study of the synthesis of CH 3 NH 3 PbBr 3 nanoplatelets through self-organization. Shape transformation from spherical nanodots to square or rectangular nanoplatelets can be achieved by keeping the preformed colloidal nanocrystals at a high concentration (3.5 mg mL -1 ) for 3 days, or combining the synthesis of nanodots with self-organization. The average thickness of the resulting CH 3 NH 3 PbBr 3 nanoplatelets is similar to the size of the original nanoparticles, and we also noticed several nanoplatelets with circular or square holes, suggesting that the shape transformation experienced a self-organization process through dipole-dipole interactions along with a realignment of dipolar vectors. Additionally, the CH 3 NH 3 PbBr 3 nanoplatelets exhibit excellent polarized emissions for stretched CH 3 NH 3 PbBr 3 nanoplatelets embedded in a polymer composite film, showing advantageous photoluminescence properties for display backlights. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Luminescent Copper(I) Halide Butterfly Dimers Coordinated to [Au(CH3imCH2py)2]BF4 and [Au(CH3imCH2quin)2]BF4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Catalano, V.; Moore, A; Shearer, J

2009-01-01

The coordination chemistry of copper(I) halides to the homoleptic, N-heterocyclic carbene Au(I) complexes [Au(CH{sub 3}imCH{sub 2}quin){sub 2}]BF{sub 4} and [Au(CH{sub 3}imCH{sub 2}py){sub 2}]BF{sub 4} was explored. The reaction of CuX (X = Cl, Br, I) with either [Au(CH{sub 3}imCH{sub 2}quin){sub 2}]BF{sub 4} or [Au(CH{sub 3}imCH{sub 2}py){sub 2}]BF{sub 4} produces trimetallic complexes containing Cu{sub 2}X{sub 2}-butterfly copper clusters coordinated to the two imine moieties. The triangular arrangement of the metals places the gold(I) center in close proximity ({approx}2.5-2.6 {angstrom}) to the centroid of the Cu-Cu vector. The Cu-Cu separations vary as a function of bridging halide with the shortest Cu-Cu separationsmore » of {approx}2.5 {angstrom} found in the iodo-complexes and the longest separations of 2.9 {angstrom} found in the bridging chloride complexes. In all six complexes the Au-Cu separations range from {approx}2.8 to 3.0 {angstrom}. In the absence of halides, the dimetallic complex [AuCu(CH{sub 3}imCH{sub 2}py){sub 2}(NCCH{sub 3}){sub 2}](BF{sub 4}){sub 2}, containing a long Au-Cu distance of {approx}4.72 {angstrom} is formed. Additionally, as the byproduct of the reaction of CuBr with [Au(CH{sub 3}imCH{sub 2}quin){sub 2}]BF{sub 4} the deep-red, dimetallic compound, AuCuBr{sub 2}(CH{sub 3}imCH{sub 2}quin){sub 2}, was isolated in very low yield. All of these complexes were studied by NMR spectroscopy, mass spectrometry, and the copper containing species were additionally characterized by X-ray crystallography. In solution the copper centers dissociate from the gold complexes, but as shown by XANES and EXAFS spectroscopy, at low temperature the Cu-Cu linkage is broken, and the individual copper(I) halides reposition themselves to opposite sides of the gold complex while remaining coordinated to one imine moiety. In the solid state all of the complexes are photoluminescent, though the nature of the excited state was not determined.« less

Quantum-chemical study of the effect of ligands on the structure and properties of gold clusters

NASA Astrophysics Data System (ADS)

Golosnaya, M. N.; Pichugina, D. A.; Oleinichenko, A. V.; Kuz'menko, N. E.

2017-02-01

The structures of [Au4(dpmp)2X2]2+clusters, where X =-C≡CH,-CH3,-SCH3,-F,-Cl,-Br,-I, dpmp is bis((diphenylphosphino)methyl)(phenyl)phosphine, are calculated at the level of density functional theory with the PBE functional and a modified Dirac-Coulomb-Breit Hamiltonian in an all-electron basis set (Λ). Using the example of [Au4(dpmp)2(C≡CC6H5)2]2+, the interatomic distances and bond angles calculated by means of PBE0/LANL2DZ, TPSS/LANL2DZ, TPSSh/LANL2DZ, and PBE/Λ are compared to X-ray crystallography data. It is shown that PBE/Λ yields the most accurate calculation of the geometrical parameters of this cluster. The ligand effect on the electronic stability of a cluster and the stability in reactions of decomposition into different fragments is studied, along with the capability of ligand exchange. Stability is predicted for [Au4(dpmp)2F2]2+ and [Au4(dpmp)2(SCH3)2]2+, while [Au4(dpmp)2I2]2+ cluster is unstable and its decomposes into two identical fragments is supposed.

Dielectric Study of the Phase Transitions in [P(CH3)4]2CuY4 (Y = Cl, Br)

NASA Astrophysics Data System (ADS)

Gesi, Kazuo

2002-05-01

Phase transitions in [P(CH3)4]2CuY4 (Y = Cl, Br) have been studied by dielectric measurements. In [P(CH3)4]2CuCl4, a slight break and a discontinuous jump on the dielectric constant vs. temperature curve are seen at the normal-incommensurate and the incommensurate-commensurate phase transitions, respectively. A small peak of dielectric constant along the b-direction exists just above the incommensurate-to-commensurate transition temperature. The anisotropic dielectric anomalies of [P(CH3)4]2CuBr4 at phase transitions were measured along the three crystallographic axes. The pressure-temperature phase diagram of [P(CH3)4]2CuCl4 was determined. The initial pressure coefficients of the normal-to-incommensurate and the incommensurate-to-commensurate transition temperatures are 0.19 K/MPa and 0.27 K/MPa, respectively. The incommensurate phase in [P(CH3)4]2CuCl4 disappears at a triple point which exists at 335 MPa and 443 K. The stability and the pressure effects of the incommensurate phases are much different among the four [Z(CH3)4]2CuY4 crystals (Z = N, P; Y = Cl, Br).

Temperature-Dependent Kinetics Studies of the Reactions Br((sup 2)P(sub 3/2)) + CH3SCH3 reversible reaction CH3SCH2 + HBr. Heat of Formation of the CH3SCH2 Radical

NASA Technical Reports Server (NTRS)

Jefferson, A.; Nicovich, J. M.; Wine, P. H.

1997-01-01

Time-resolved resonance fluorescence detection of Br((sup 2)P(sub 3/2)) atom disappearance or appearance 266 nm laser flash photolysis of CF2Br2/CH3SCH3/H2/N2 and Cl2CO/CH2SCH3/HBr/H2/N2 mixtures has been employed to study the kinetics of the reactions Br((sup 2)P(sub 3/2)) + CH3SCH3 reversible reaction HBr + CH3SCH2 (1,-1) as a function of temperature over the range 386-604 K. Arrhenius expressions in units of cu cm/molecule which describe the results are k3= (9.0 +/- 2.9) x 10 (exp -11) exp[(-2386 +/- 151)/T]; errors are 2 sigma and represent precision only. To our knowledge, these are the first kinetic data reported for each of the two reactions studied. Second and third law analyses of the equilibrium data for reactions 1 and -1 have been employed to obtain the following enthalpies of reaction in units of kcal/mol: Delta-H(298) = 6.11 +/- 1.37 and Delta-H(0) = 5.37 +/- 1.38. Combining the above enthalpies of reaction with the well-known heats of formation of Br, HBr, CH3SCH3 gives the following heats of formation of the CH3SCH2 radical in units of kcal/mol: Delta-H(sub(f,298)) = 32.7 +/- 1.4 and Delta-H(sub (f,0)) = 35.3 +/- 1.4; errors are 2 sigma and represent estimates of absolute accuracy. The C-H bond dissociation energy in CH3SCH3 obtained from our data, 93.7 +/- 1.4 kcal/mol at 298 K and 92.0 +/- 1.4 kcal at 0 k, agrees well with a recent molecular beam photofragmentaion study but is 3 kcal/mol lower than the value obtained from an iodination kinetics study.

Cation Dynamics Governed Thermal Properties of Lead Halide Perovskite Nanowires.

PubMed

Wang, Yuxi; Lin, Renxing; Zhu, Pengchen; Zheng, Qinghui; Wang, Qianjin; Li, Deyu; Zhu, Jia

2018-05-09

Metal halide perovskite (MHP) nanowires such as hybrid organic-inorganic CH 3 NH 3 PbX 3 (X = Cl, Br, I) have drawn significant attention as promising building blocks for high-performance solar cells, light-emitting devices, and semiconductor lasers. However, the physics of thermal transport in MHP nanowires is still elusive even though it is highly relevant to the device thermal stability and optoelectronic performance. Through combined experimental measurements and theoretical analyses, here we disclose the underlying mechanisms governing thermal transport in three different kinds of lead halide perovskite nanowires (CH 3 NH 3 PbI 3 , CH 3 NH 3 PbBr 3 and CsPbBr 3 ). It is shown that the thermal conductivity of CH 3 NH 3 PbBr 3 nanowires is significantly suppressed as compared to that of CsPbBr 3 nanowires, which is attributed to the cation dynamic disorder. Furthermore, we observed different temperature-dependent thermal conductivities of hybrid perovskites CH 3 NH 3 PbBr 3 and CH 3 NH 3 PbI 3 , which can be attributed to accelerated cation dynamics in CH 3 NH 3 PbBr 3 at low temperature and the combined effects of lower phonon group velocity and higher Umklapp scattering rate in CH 3 NH 3 PbI 3 at high temperature. These data and understanding should shed light on the design of high-performance MHP based thermal and optoelectronic devices.

Enhanced photovoltaic performance of CH3NH3PbBrXI3-X-based perovskite solar cells via anti-solvent extraction

NASA Astrophysics Data System (ADS)

Jiang, Zhaoyi; Zhang, Weijia; Lu, Chaoqun; Ma, Denghao; Liu, Haixu; Yu, Wei; Zhang, Yu; Ma, Qiang; Zhang, Yulong

2018-06-01

In this paper, the two-step sequential deposition method was used to prepare the CH3NH3PbBrXI3-X films by introducing CH3NH3Br in the precursors. The surface morphology of the PbI2 films was controlled by anti-solvent extraction (ASE) to improve the microstructure and photo-physical properties of the perovskite films. It was noteworthy that, compared to the compact PbI2 films, the porous PbI2 films facilitated the growth of crystals and bromine incorporation in films, and the prepared perovskite films exhibited enlarged grain size, increased light absorption, enhanced Br incorporation and prolonged carrier lifetime, which resulted in excellent photo-electrical properties of the CH3NH3PbBrXI3-X films. With porous PbI2 templates, the inverted planar perovskite solar cells based on films with appropriate Br incorporation (CH3NH3Br/CH3NH3I mole ratio = 3/7) showed a photovoltaic conversion efficiency (PCE) of 14.9%, and the stability of the devices in air was elevated. Consequently, the high-quality CH3NH3PbBrXI3-X films can be obtained with porous PbI2 templates for improving the performance of the perovskite solar cells.

Thiolate-bridged dinuclear iron(tris-carbonyl)–nickel complexes relevant to the active site of [NiFe] hydrogenase

PubMed Central

Ohki, Yasuhiro; Yasumura, Kazunari; Kuge, Katsuaki; Tanino, Soichiro; Ando, Masaru; Li, Zilong; Tatsumi, Kazuyuki

2008-01-01

The reaction of NiBr2(EtOH)4 with a 1:2–3 mixture of FeBr2(CO)4 and Na(SPh) generated a linear trinuclear Fe–Ni–Fe cluster (CO)3Fe(μ-SPh)3Ni(μ-SPh)3Fe(CO)3, 1, whereas the analogous reaction system FeBr2(CO)4/Na(StBu)/NiBr2(EtOH)4 (1:2–3:1) gave rise to a linear tetranuclear Fe–Ni–Ni–Fe cluster [(CO)3Fe(μ-StBu)3Ni(μ-Br)]2, 2. By using this tetranuclear cluster 2 as the precursor, we have developed a new synthetic route to a series of thiolate-bridged dinuclear Fe(CO)3–Ni complexes, the structures of which mimic [NiFe] hydrogenase active sites. The reactions of 2 with SC(NMe2)2 (tmtu), Na{S(CH2)2SMe} and ortho-NaS(C6H4)SR (R = Me, tBu) led to isolation of (CO)3Fe(μ-StBu)3NiBr(tmtu), 3, (CO)3Fe(StBu)(μ-StBu)2Ni{S(CH2)2SMe}, 4, and (CO)3Fe(StBu)(μ-StBu)2Ni{S(C6H4)SR}, 5a (R = Me) and 5b (R = tBu), respectively. On the other hand, treatment of 2 with 2-methylthio-phenolate (ortho-O(C6H4)SMe) in methanol resulted in (CO)3Fe(μ-StBu)3Ni(MeOH){O(C6H4)SMe}, 6a. The methanol molecule bound to Ni is labile and is readily released under reduced pressure to afford (CO)3Fe(StBu)(μ-StBu)2Ni{O(C6H4)SMe}, 6b, and the coordination geometry of nickel changes from octahedral to square planar. Likewise, the reaction of 2 with NaOAc in methanol followed by crystallization from THF gave (CO)3Fe(μ-StBu)3Ni(THF)(OAc), 7. The dinuclear complexes, 3-7, are thermally unstable, and a key to their successful isolation is to carry out the reactions and manipulations at −40°C. PMID:18511566

CH3Br adsorption on MgO/Mo ultrathin films: A DFT study

NASA Astrophysics Data System (ADS)

Cipriano, Luis A.; Tosoni, Sergio; Pacchioni, Gianfranco

2018-06-01

The adsorption of methyl bromide on MgO ultrathin films supported on Mo(100) was studied by means of density functional theory calculations, in comparison to the MgO(100) and Mo(100) surfaces. The adsorption energy and geometry were shown to depend on the thickness of the supported oxide film. MgO films as thick as 2ML (or more) display adsorptive properties similar to MgO(100), i.e. the adsorption of CH3Br is mostly due to dispersion and the molecule lies in a tilted geometry almost parallel to the surface. The CH3Br HOMO-LUMO gap is almost unaltered with respect to the gas phase. On metallic Mo(100) surfaces the bonding is completely different with the CH3Br molecule strongly bound and the C-Br bond axis almost vertical with respect to the metal surface. The MgO monolayer supported on Mo exhibits somehow intermediate properties: the tilt angle is larger and the bonding is stronger than on MgO(100), due to the effect of the supporting metal. In this case, a small reduction of the HOMO-LUMO gap of the adsorbed molecule is reported. The results help to rationalize the observed behavior in photodissociation of CH3Br supported on different substrates.

Description of toluene inhibition of methyl bromide biodegradation in seawater and isolation of a marine toluene oxidizer that degrades methyl bromide.

PubMed

Goodwin, Kelly D; Tokarczyk, Ryszard; Stephens, F Carol; Saltzman, Eric S

2005-07-01

Methyl bromide (CH3Br) and methyl chloride (CH3Cl) are important precursors for destruction of stratospheric ozone, and oceanic uptake is an important component of the biogeochemical cycle of these methyl halides. In an effort to identify and characterize the organisms mediating halocarbon biodegradation, we surveyed the effect of potential cometabolic substrates on CH3Br biodegradation using a 13CH3Br incubation technique. Toluene (160 to 200 nM) clearly inhibited CH3Br and CH3Cl degradation in seawater samples from the North Atlantic, North Pacific, and Southern Oceans. Furthermore, a marine bacterium able to co-oxidize CH3Br while growing on toluene was isolated from subtropical Western Atlantic seawater. The bacterium, Oxy6, was also able to oxidize o-xylene and the xylene monooxygenase (XMO) pathway intermediate 3-methylcatechol. Patterns of substrate oxidation, lack of acetylene inhibition, and the inability of the toluene 4-monooxygenase (T4MO)-containing bacterium Pseudomonas mendocina KR1 to degrade CH3Br ruled out participation of the T4MO pathway in Oxy6. Oxy6 also oxidized a variety of toluene (TOL) pathway intermediates such as benzyl alcohol, benzylaldehyde, benzoate, and catechol, but the inability of Pseudomonas putida mt-2 to degrade CH3Br suggested that the TOL pathway might not be responsible for CH3Br biodegradation. Molecular phylogenetic analysis identified Oxy6 to be a member of the family Sphingomonadaceae related to species within the Porphyrobacter genus. Although some Sphingomonadaceae can degrade a variety of xenobiotic compounds, this appears to be the first report of CH3Br degradation for this class of organism. The widespread inhibitory effect of toluene on natural seawater samples and the metabolic capabilities of Oxy6 indicate a possible link between aromatic hydrocarbon utilization and the biogeochemical cycle of methyl halides.

Control of oleylamine to perovskite ratio in synthesis of MAPbBr3 nanoparticles

NASA Astrophysics Data System (ADS)

Huang, Jing; Wu, Yi-Hua; Zhu, Zhi-Gang; Shih, Wan Y.; Shih, Wei-Heng

2018-06-01

Methylammonium lead bromide (CH3NH3PbBr3) nanocrystals have great potentials for lighting and display applications. Previously we synthesized CH3NH3PbBr3 nanocrystals using oleylamine as capping molecule and found that by increasing the oleylamine to CH3NH3PbBr3 perovskite ratio (OPR), the photoluminescence wavelengths and morphology of CH3NH3PbBr3 nanocrystals could be varied from 530 nm (green) platelets to 460 nm (blue) particles. Here we modified the synthesis to direct injection of precursors into toluene and found that increasing OPR not only changes the wavelength and morphology of nanocrystals but also the size of the unit cells.

Photophysical properties of wavelength-tunable methylammonium lead halide perovskite nanocrystals

DOE PAGES

Freppon, Daniel J.; Men, Long; Burkhow, Sadie J.; ...

2016-11-25

Here we present the time-correlated luminescence of isolated nanocrystals of five methylammonium lead mixed-halide perovskite compositions (CH 3NH 3PbBr 3$-$xI x) that were synthesized with varying iodide and bromide anion loading. All analyzed nanocrystals had a spherical morphology with diameters in the range of 2 to 32 nm. The luminescence maxima of CH 3NH 3PbBr 3$-$xI x nanocrystals were tuned to wavelengths ranging between 498 and 740 nm by varying the halide loading. Both CH 3NH 3PbI 3 and CH 3NH 3PbBr 3 nanocrystals exhibited no luminescence intermittency for more than 90% of the 250 s analysis time, as definedmore » by a luminescence intensity three standard deviations above the background. The mixed halide CH 3NH 3PbBr 0.75I 0.25, CH 3NH 3PbBr 0.50I 0.50, and CH 3NH 3PbBr 0.25I 0.75 nanocrystals exhibited luminescence intermittency in 18%, 4% and 26% of the nanocrystals, respectively. Irrespective of luminescence intermittency, luminescence intensities were classified for each nanocrystal as: (a) constant, (b) multimodal, (c) photobrightening, and (d) photobleaching. Finally, based on their photophysics, the CH 3NH 3PbBr 3$-$xI x nanocrystals can be expected to be useful in a wide-range of applications where low and non-intermittent luminescence is desirable, for example as imaging probes and in films for energy conversion devices.« less

Photophysical properties of wavelength-tunable methylammonium lead halide perovskite nanocrystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freppon, Daniel J.; Men, Long; Burkhow, Sadie J.

Here we present the time-correlated luminescence of isolated nanocrystals of five methylammonium lead mixed-halide perovskite compositions (CH 3NH 3PbBr 3$-$xI x) that were synthesized with varying iodide and bromide anion loading. All analyzed nanocrystals had a spherical morphology with diameters in the range of 2 to 32 nm. The luminescence maxima of CH 3NH 3PbBr 3$-$xI x nanocrystals were tuned to wavelengths ranging between 498 and 740 nm by varying the halide loading. Both CH 3NH 3PbI 3 and CH 3NH 3PbBr 3 nanocrystals exhibited no luminescence intermittency for more than 90% of the 250 s analysis time, as definedmore » by a luminescence intensity three standard deviations above the background. The mixed halide CH 3NH 3PbBr 0.75I 0.25, CH 3NH 3PbBr 0.50I 0.50, and CH 3NH 3PbBr 0.25I 0.75 nanocrystals exhibited luminescence intermittency in 18%, 4% and 26% of the nanocrystals, respectively. Irrespective of luminescence intermittency, luminescence intensities were classified for each nanocrystal as: (a) constant, (b) multimodal, (c) photobrightening, and (d) photobleaching. Finally, based on their photophysics, the CH 3NH 3PbBr 3$-$xI x nanocrystals can be expected to be useful in a wide-range of applications where low and non-intermittent luminescence is desirable, for example as imaging probes and in films for energy conversion devices.« less

Optimization of the photoelectric properties and photo-stability of CH3NH3PbBrXI3-X films for efficient planar perovskite solar cells

NASA Astrophysics Data System (ADS)

Jiang, Zhaoyi; Zhang, Weijia; Ma, Denghao; Liu, Haixu; Yu, Wei; Fan, Zhiqiang; Zhang, Yulong; Lu, Chaoqun; Li, Yun

2018-01-01

In this paper, the CH3NH3PbBrXI3-X films were prepared by introducing CH3NH3Br into CH3NH3I precursor solution, after which the microstructure and photoelectric properties of the films were thoroughly investigated. Due to Br incorporation in the perovskite films, the band gap increased and the light absorption was slightly reduced while the charge carrier lifetime was prolonged due to the enhanced crystallinity. For the films with higher bromine content, the red shift of the photoluminescence peaks indicated that the phase segregation appeared in the films under illumination, which led to the formation of the iodine-rich domains in this process and the reduced carrier lifetime. On the contrary, for films with lower bromine content, the red shift of the photoluminescence peaks was negligible, which revealed that instability of the perovskite films under illumination can be suppressed by adjusting the bromine content of the films. Consequently, by moderate Br incorporation (CH3NH3Br/CH3NH3I mole ratio = 3:7), the CH3NH3PbBrXI3-X films with optimal photoelectric properties and photo-stability were achieved, and the stable photoelectric conversion efficiency of corresponding device under illumination can reach 13.8%.

Finding the Missing Stratospheric Br(sub y): A Global Modeling Study of CHBr3 and CH2Br2

NASA Technical Reports Server (NTRS)

Liang, Q.; Stolarski, R. S.; Kawa, S. R.; Nielsen, J. E.; Douglass, A. R.; Rodriguez, J. M.; Blake, D. R.; Atlas, E. L.; Ott, L. E.

2010-01-01

Recent in situ and satellite measurements suggest a contribution of 5 pptv to stratospheric inorganic bromine from short-lived bromocarbons. We conduct a modeling study of the two most important short-lived bromocarbons, bromoform (CHBr3) and dibromomethane (CH2Br2), with the Goddard Earth Observing System Chemistry Climate Model (GEOS CCM) to account for this missing stratospheric bromine. We derive a "top-down" emission estimate of CHBr3 and CH2Br2 using airborne measurements in the Pacific and North American troposphere and lower stratosphere obtained during previous NASA aircraft campaigns. Our emission estimate suggests that to reproduce the observed concentrations in the free troposphere, a global oceanic emission of 425 Gg Br yr(exp -1) for CHBr3 and 57 Gg Br yr(exp -l) for CH2Br2 is needed, with 60% of emissions from open ocean and 40% from coastal regions. Although our simple emission scheme assumes no seasonal variations, the model reproduces the observed seasonal variations of the short-lived bromocarbons with high concentrations in winter and low concentrations in summer. This indicates that the seasonality of short-lived bromocarbons is largely due to seasonality in their chemical loss and transport. The inclusion of CHBr3 and CH2Br2 contributes 5 pptv bromine throughout the stratosphere. Both the source gases and inorganic bromine produced from source gas degradation (BrSLS) in the troposphere are transported into the stratosphere, and are equally important. Inorganic bromine accounts for half (2.5 pptv) of the bromine from the inclusion of CHBr3 and CHzBr2 near the tropical tropopause and its contribution rapidly increases to 100% as altitude increases. More than 85% of the wet scavenging of Br(sub y)(sup VSLS) occurs in large-scale precipitation below 500 hPa. Our sensitivity study with wet scavenging in convective updrafts switched off suggests that Br(sub y)(sup SLS) in the stratosphere is not sensitive to convection. Convective scavenging only accounts for 0.2 pptv (4%) difference in inorganic bromine delivered to the stratosphere.

Rate Constants for the Reactions of OH with CH(sub 3)Cl, CH(sub 2) C1(sub 2), CHC1(sub 3)and CH(sub 3)Br

NASA Technical Reports Server (NTRS)

Hsu, H-J.; DeMore, W.

1994-01-01

Rate constants for the reactions of OH with CH3C1, CH2Cl2, CHCl3 and CH3Br have been measured by a relative rate technique in which the reaction rate of each compound was compared to that of HFC-152a (CH3CHF2)and for CH2Cl2, HFC-161 (CH3CH2F).

Exciton versus free carrier photogeneration in organometal trihalide perovskites probed by broadband ultrafast polarization memory dynamics.

PubMed

Sheng, ChuanXiang; Zhang, Chuang; Zhai, Yaxin; Mielczarek, Kamil; Wang, Weiwei; Ma, Wanli; Zakhidov, Anvar; Vardeny, Z Valy

2015-03-20

We studied the ultrafast transient response of photoexcitations in two hybrid organic-inorganic perovskite films used for high efficiency photovoltaic cells, namely, CH(3)NH(3)PbI(3) and CH(3)NH(3)PbI(1.1)Br(1.9) using polarized broadband pump-probe spectroscopy in the spectral range of 0.3-2.7 eV with 300 fs time resolution. For CH(3)NH(3)PbI(3) with above-gap excitation we found both photogenerated carriers and excitons, but only carriers are photogenerated with below-gap excitation. In contrast, mainly excitons are photogenerated in CH(3)NH(3)PbI(1.1)Br(1.9). Surprisingly, we also discovered in CH(3)NH(3)PbI(3), but not in CH(3)NH(3)PbI(1.1)Br(1.9), transient photoinduced polarization memory for both excitons and photocarriers, which is also reflected in the steady state photoluminescence. From the polarization memory dynamics we obtained the excitons diffusion constant in CH(3)NH(3)PbI(3), D≈0.01  cm(2) s(-1).

Exciton versus Free Carrier Photogeneration in Organometal Trihalide Perovskites Probed by Broadband Ultrafast Polarization Memory Dynamics

NASA Astrophysics Data System (ADS)

Sheng, ChuanXiang; Zhang, Chuang; Zhai, Yaxin; Mielczarek, Kamil; Wang, Weiwei; Ma, Wanli; Zakhidov, Anvar; Vardeny, Z. Valy

2015-03-01

We studied the ultrafast transient response of photoexcitations in two hybrid organic-inorganic perovskite films used for high efficiency photovoltaic cells, namely, CH3NH3PbI3 and CH3NH3PbI1.1Br1.9 using polarized broadband pump-probe spectroscopy in the spectral range of 0.3-2.7 eV with 300 fs time resolution. For CH3NH3PbI3 with above-gap excitation we found both photogenerated carriers and excitons, but only carriers are photogenerated with below-gap excitation. In contrast, mainly excitons are photogenerated in CH3NH3PbI1.1Br1.9 . Surprisingly, we also discovered in CH3NH3PbI3 , but not in CH3NH3PbI1.1Br1.9 , transient photoinduced polarization memory for both excitons and photocarriers, which is also reflected in the steady state photoluminescence. From the polarization memory dynamics we obtained the excitons diffusion constant in CH3NH3PbI3 , D ≈0.01 cm2 s-1 .

Stabilized wide bandgap MAPbBr xI 3-x perovskite by enhanced grain size and improved crystallinity

DOE PAGES

Hu, Miao; Bi, Cheng; Yuan, Yongbo; ...

2015-12-07

In this study, the light instability of CH 3NH 3PbI xBr 3–x has been raised one of the biggest challenges for its application in tandem solar cells. Here we show that an improved crystallinity and grain size of CH 3NH 3PbI xBr 3–x films could stabilize these materials under one sun illumination, improving both the efficiency and stability of the wide-bandgap perovskite solar cells.

Constraining the global bromomethane budget from carbon stable isotopes

NASA Astrophysics Data System (ADS)

Bahlmann, Enno; Wittmer, Julian; Greule, Markus; Zetzsch, Cornelius; Seifert, Richard; Keppler, Frank

2016-04-01

Despite intense research in the last two decades, the global bromomethane (CH3Br) budget remains unbalanced with the known sinks exceeding the known sources by about 25%. The reaction with OH is the largest sink for CH3Br. We have determined the kinetic isotope effects for the reactions of CH3Br with the OH and Cl radical in order to better constrain the global CH3Br budget from an isotopic perspective. The isotope fractionation experiments were performed at 20±1°C in a 3500 L Teflon smog-chamber with initial CH3Br mixing ratios of about 2 and 10 ppm and perflourohexane (25 ppb) as internal standard. Atomic chlorine (Cl) was generated via photolysis of molecular chlorine (Cl2) using a solar simulator with an actinic flux comparable to that of the sun in mid-summer in Germany. OH radicals were generated via the photolysis of ozone (O3) at 253.7 nm in the presence of water vapor (RH = 70%).The mixing ratios of CH3Br, and perflourohexane were monitored by GC-MS with a time resolution of 15 minutes throughout the experiments. From each experiment 10 to 15 sub samples were taken in regular time intervals for subsequent carbon isotope ratio determinations by GC-IRMS performed at two independent laboratories in parallel. We found a kinetic isotope effect (KIE) of 17.6±3.3‰ for the reaction of CH3Br with OH and a KIE of 9.8±1.4 ‰ for the reaction with Cl*. We used these fractionation factors along with new data on the isotopic composition of CH3Br in the troposphere (-34±7‰) and the surface ocean (-26±7‰) along with reported source signatures, to constrain the unknown source from an isotopic perspective. The largest uncertainty in estimating the isotopic composition of the unknown source arises from the soil sink. Microbial degradation in soils is the second largest sink and assigned with a large fractionation factors of about 50‰. However, field experiments revealed substantially smaller apparent fractionation factors ranging from 11 to 22‰. In addition, simple model studies suggest that the soil uptake of CH3Br and hence its isotopic effect is largely controlled by diffusion resulting in an even smaller apparent isotopic fractionation. As a consequence, the estimated source signature for the unknown source is discussed with respect to the assumptions made for the soil sink.

Ab initio NMR parameters of BrCH3 and ICH3 with relativistic and vibrational corrections

NASA Astrophysics Data System (ADS)

Uhlíková, Tereza; Urban, Štěpán

2018-05-01

This study is focused on two effects identified when NMR parameters are calculated based on first principles. These effects are 1. vibrational correction of properties when using ab initio optimized equilibrium geometry; 2. relativistic effects and limits of using the Flygare equation. These effects have been investigated and determined for nuclear spin-rotation constants and nuclear magnetic shieldings for the CH3Br and CH3I molecules. The most significant result is the difference between chemical shieldings determined based on the ab initio relativistic four-component Dirac-Coulomb Hamiltonian and chemical shieldings calculated using experimental values and the Flygare equation. This difference is approximately 320 ppm and 1290 ppm for 79Br and 127I in the CH3X molecule, respectively.

Preparation, IR spectroscopy, and time-of-flight mass spectrometry of halogenated and methylated Si(111)

NASA Astrophysics Data System (ADS)

Salingue, Nils; Hess, Peter

2011-09-01

The preparation of chlorine-, bromine-, and iodine-terminated silicon surfaces (Si(111):Cl, Br, and I) using atomically flat Si(111)-(1×1):H is described. The halogenated surfaces were obtained by photochemically induced radical substitution reactions with the corresponding dihalogen in a Schlenk tube by conventional inert gas chemistry. The nucleophilic substitution of the Si-Cl functionality with the Grignard reagent (CH3MgCl) resulted in the unreconstructed methylated Si(111)-(1×1):CH3 surface. The halogenated and methylated silicon surfaces were characterized by Fourier transform infrared (FTIR) spectroscopy and laser-induced desorption of monolayers (LIDOM). Calibration of the desorption temperature via analysis of time-of-flight (TOF) distributions as a function of laser fluence allowed the determination of the originally emitted neutral fragments by TOF mass spectrometry using electron-impact ionization. The halogens were desorbed atomically and as SiX n (X = Cl, Br) clusters. The methyl groups mainly desorbed as methyl and ethyl fragments and a small amount of +SiCH3.

Experimental and Estimated Rate Constants for the Reactions of Hydroxyl Radicals with Several Halocarbons

NASA Technical Reports Server (NTRS)

DeMore, W.B.

1996-01-01

Relative rate experiments are used to measure rate constants and temperature dependencies of the reactions of OH with CH3F (41), CH2FCl (31), CH2BrCl (30B1), CH2Br2 (3OB2), CHBr3 (2OB3), CF2BrCHFCl (123aBl(alpha)), and CF2ClCHCl2 (122). Rate constants for additional compounds of these types are estimated using an empirical rate constant estimation method which is based on measured rate constants for a wide range of halocarbons. The experimental data are combined with the estimated and previously reported rate constants to illustrate the effects of F, Cl, and Br substitution on OH rate constants for a series of 19 halomethanes and 25 haloethanes. Application of the estimation technique is further illustrated for some higher hydrofluorocarbons (HFCs), including CHF2CF2CF2CF2H (338pcc), CF3CHFCHFCF2CF3 (43-10mee), CF3CH2CH2CF3 (356ffa), CF3CH2CF2CH2CF3 (458mfcf), CF3CH2CHF2 (245fa), and CF3CH2CF2CH3 (365mfc). The predictions are compared with literature data for these compounds.

The 2ν6/ν2 + ν3/ν3 + ν5 band system of CH3Br revisited: Modeling anharmonic and Coriolis interactions in a three-level system near 2000 cm-1

NASA Astrophysics Data System (ADS)

Ceausu-Velcescu, Adina; Kwabia Tchana, Fridolin; Landsheere, Xavier

2018-06-01

The 2ν6 (A1 + E)/ν2 + ν3 (A1)/ν3 + ν5 (E) band system of CH3Br, near 2000 cm-1, has been studied, for both 79Br and 81Br isotopologues, using Fourier transform infrared spectroscopy, with a resolution of 0.003 cm-1. This band system, revealing anharmonic (Δk = Δl = 0) and Coriolis (Δk = Δl = ± 1) interactions, has been analyzed through a least-squares fit of more than 3000 transitions, for each isotopologue. More than 600 transitions belonging to the very weak ν3 + ν5 combination band were assigned for the first time, for both CH379Br and CH381Br isotopologues. Assignments of the weak 2 ν60 parallel band, which is Fermi-interacting with ν2 + ν3, were also considerably extended with respect to a previous high-resolution study (Najib et al., 1985), thanks to a more accurate knowledge of the Fermi coupling parameters and of the relative positions of the interacting levels. The least-squares fits provided quantitative reproduction of all data belonging to the four above mentioned bands. Moreover, the Coriolis coupling parameters obtained for the ν2 + ν3/ν3 + ν5 interacting bands show a remarkable consistency with those obtained for the ν2/ν5 'fundamental' system (Kwabia Tchana et al., 2004).

Dissociative adsorption of CH{sub 3}X (X = Br and Cl) on a silicon(100) surface revisited by density functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Chen-Guang; Lash Miller Chemical Laboratories, Department of Chemistry and Institute of Optical Sciences, University of Toronto, Toronto, Ontario M5S 3H6; Huang, Kai, E-mail: khuang@chem.utoronto.ca, E-mail: wji@ruc.edu.cn

During the dissociative adsorption on a solid surface, the substrate usually participates in a passive manner to accommodate fragments produced upon the cleavage of the internal bond(s) of a (transient) molecular adsorbate. This simple picture, however, neglects the flexibility of surface atoms. Here, we report a Density Functional Theory study to revisit our early studies of the dissociative adsorption of CH{sub 3}X (X = Br and Cl) on Si(100). We have identified a new reaction pathway, which involves a flip of a silicon dimer; this new pathway agrees better with experiments. For our main exemplar of CH{sub 3}Br, insights havemore » been gained using a simple model that involves a three-atom reactive center, Br-C-Si. When the silicon dimer flips, the interaction between C and Si in the Br-C-Si center is enhanced, evident in the increased energy-split of the frontier orbitals. We also examine how the dissociation dynamics of CH{sub 3}Br is altered on a heterodimer (Si-Al, Si-P, and Si-Ge) in a Si(100) surface. In each case, we conclude, on the basis of computed reaction pathways, that no heterodimer flipping is involved before the system transverses the transition state to dissociative adsorption.« less

A multilayered-representation quantum mechanical/molecular mechanics study of the SN2 reaction of CH3Br + OH- in aqueous solution

NASA Astrophysics Data System (ADS)

Xu, Yulong; Wang, Tingting; Wang, Dunyou

2012-11-01

The bimolecular nucleophilic substitution (SN2) reaction of CH3Br and OH- in aqueous solution was investigated using a multilayered-representation quantum mechanical and molecular mechanics methodology. Reactant complex, transition state, and product complex are identified and characterized in aqueous solution. The potentials of mean force are computed under both the density function theory and coupled-cluster single double (triple) (CCSD(T)) levels of theory for the reaction region. The results show that the aqueous environment has a significant impact on the reaction process. The solvation effect and the polarization effect combined raise the activation barrier height by ˜16.2 kcal/mol and the solvation effect is the dominant contribution to the potential of mean force. The CCSD(T)/MM representation presents a free energy activation barrier height of 22.8 kcal/mol and the rate constant at 298 K of 3.7 × 10-25 cm3 molecule-1 s-1 which agree very well with the experiment values at 23.0 kcal/mol and 2.6 × 10-25 cm3 molecule-1 s-1, respectively.

Kinetics of Electrocatalysis of Dibromoalkyl Reductions Using Electrodes with Covalently Immobilized Metallotetraphenylporphyrins.

DTIC Science & Technology

1981-01-29

Technical Report Using Electrodes with Covalently Immobilized Metal l otetraphenyl porphyri ns G. PERFORMING ORG. REPORT NUMBER 7. AU𔄁IOR(’.) 0...and CH2BrCHBrCH 3 at the surfaces of electrodes to which cobalt(II) or copper (II) tetra(p-aminophenyl)porphyrin has been covalently attached is strongly...27514 ABSTRACT The reduction of PhCHBrCH 2 Br, PhCHBrCHBrPh, and CH2BrCHBrCH3 at the surfaces of electrodes to which cobalt(lI) or copper (If) tetra(p

Single-crystal perovskite CH3NH3PbBr3 prepared by cast capping method for light-emitting diodes

NASA Astrophysics Data System (ADS)

Nguyen, Van-Cao; Katsuki, Hiroyuki; Sasaki, Fumio; Yanagi, Hisao

2018-04-01

In this study, electroluminescence from single crystals of CH3NH3PbBr3 perovskite is explored. The cast capping method was applied to fabricate simple devices with an ITO/CH3NH3PbBr3/ITO structure. The devices showed a low operation voltage of 2 V and a pure green luminescence with full width at half maximum of ∼20 nm. However, the emission occurring at the crystal edges demonstrated blinking with a subsecond time interval, which is similar to the previously reported photoluminescence behavior of nanocrystal perovskites. This electroluminescence blinking may provide new insight into the recombination processes depending on the carrier traps and defects of emission layers in perovskite light-emitting devices.

Rate constants for the reactions of OH with CH3Cl, CH2Cl2, CHCl3, and CH3Br

NASA Technical Reports Server (NTRS)

Hsu, K.-J.; Demore, W. B.

1994-01-01

Rate constants for the reactions of OH with CH3Cl, CH2Cl2, CHCl3, and CH3Br have been measured by a relative rate technique in which the reaction rate of each compound was compared to that of HFC-152a (CH3CHF2) and (for CH2Cl2) HFC-161 (CH3CH2F). Using absolute rate constants for HFC-152a and HFC-161, which we have determined relative to those for CH4, CH3CCl3, and C2H6, temperature dependent rate constants of both compounds were derived. The derived rate constant for CH3Br is in good agreement with recent absolute measurements. However, for the chloromethanes all the rate constants are lower at atmospheric temperatures than previously reported, especially for CH2Cl2 where the present rate constant is about a factor of 1.6 below the JPL 92-20 value. The new rate constant appears to resolve a discrepancy between the observed atmospheric concentrations and those calculated from the previous rate constant and estimated release rates.

Low dimensional CH3NH3PbBr3 cubes for persistent luminescence: Energy variation of electron excitation

NASA Astrophysics Data System (ADS)

Besral, N.; Paul, T.; Thakur, S.; Sarkar, S.; Sardar, K.; Chanda, K.; Das, A.; Chattopadhyay, K. K.

2018-04-01

The impact of varying electron beam voltage upon room temperature CL (cathodoluminescence) properties of crystalline organic-inorganic lead halide perovskite CH3NH3PbBr3 (Methylammonium lead tribromide) microcubes have been studied. CH3NH3PbBr3 microcubes were synthesized at room temperature by a very straight forward wet chemical route. After preliminary characterizations like XRD (X-ray diffraction), FESEM (Field emission scanning electron microscopy), UV-Vis spectroscopy, CL study at three different beam voltages i.e. 5 kV, 10 kV and 15 kV respectively was performed at room temperature. Prominent emission signals were obtained with emission peaks at 2.190 eV (FWHM 0.120 eV), 2.222 eV (FWHM 0.108 eV) and 2.242 eV (FWHM 0.095 eV) for electron beam voltages 5 kV, 10 kV and 15 kV respectively.

Room temperature three-photon pumped CH3NH3PbBr3 perovskite microlasers.

PubMed

Gao, Yisheng; Wang, Shuai; Huang, Can; Yi, Ningbo; Wang, Kaiyang; Xiao, Shumin; Song, Qinghai

2017-03-28

Hybrid lead halide perovskites have made great strides in next-generation light-harvesting and light emitting devices. Recently, they have also shown great potentials in nonlinear optical materials. Two-photon absorption and two-photon light emission have been thoroughly studied in past two years. However, the three-photon processes are rarely explored, especially for the laser emissions. Here we synthesized high quality CH 3 NH 3 PbBr 3 perovskite microstructures with solution processed precipitation method and studied their optical properties. When the microstructures are pumped with intense 1240 nm lasers, we have observed clear optical limit effect and the band-to-band photoluminescence at 540 nm. By increasing the pumping density, whispering-gallery-mode based microlasers have been achieved from CH 3 NH 3 PbBr 3 perovskite microplate and microrod for the first time. This work demonstrates the potentials of hybrid lead halide perovskites in nonlinear photonic devices.

Room temperature three-photon pumped CH3NH3PbBr3 perovskite microlasers

NASA Astrophysics Data System (ADS)

Gao, Yisheng; Wang, Shuai; Huang, Can; Yi, Ningbo; Wang, Kaiyang; Xiao, Shumin; Song, Qinghai

2017-03-01

Hybrid lead halide perovskites have made great strides in next-generation light-harvesting and light emitting devices. Recently, they have also shown great potentials in nonlinear optical materials. Two-photon absorption and two-photon light emission have been thoroughly studied in past two years. However, the three-photon processes are rarely explored, especially for the laser emissions. Here we synthesized high quality CH3NH3PbBr3 perovskite microstructures with solution processed precipitation method and studied their optical properties. When the microstructures are pumped with intense 1240 nm lasers, we have observed clear optical limit effect and the band-to-band photoluminescence at 540 nm. By increasing the pumping density, whispering-gallery-mode based microlasers have been achieved from CH3NH3PbBr3 perovskite microplate and microrod for the first time. This work demonstrates the potentials of hybrid lead halide perovskites in nonlinear photonic devices.

ALTERED RA SIGNALING IN THE GENESIS OF ETHANOL-INDUCED LIMB DEFECTS

EPA Science Inventory

Altered RA Signaling in the Genesis of Ethanol-Induced Limb Defects

Johnson CS(1), Sulik KK(1,2) Hunter, ES III(3)
(1) Dept of Cell and Developmental Biology, UNC-Chapel Hill (2) Bowles Center for Alcohol Studies, UNC-CH (3) NHEERL, ORD, US EPA, RTP, NC

Administr...

Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites

PubMed Central

Dar, M. Ibrahim; Jacopin, Gwénolé; Meloni, Simone; Mattoni, Alessandro; Arora, Neha; Boziki, Ariadni; Zakeeruddin, Shaik Mohammed; Rothlisberger, Ursula; Grätzel, Michael

2016-01-01

Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2)2PbBr3, which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (<100 K) photoluminescence of CH3NH3PbI3 and CH3NH3PbBr3 reveals two distinct emission peaks, whereas that of CH(NH2)2PbBr3 shows a single emission peak. Furthermore, irrespective of perovskite composition, the bandgap exhibits an unusual blueshift by raising the temperature from 15 to 300 K. Density functional theory and classical molecular dynamics simulations allow for assigning the additional photoluminescence peak to the presence of molecularly disordered orthorhombic domains and also rationalize that the unusual blueshift of the bandgap with increasing temperature is due to the stabilization of the valence band maximum. Our findings provide new insights into the salient emission properties of perovskite materials, which define their performance in solar cells and light-emitting devices. PMID:27819049

Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites.

PubMed

Dar, M Ibrahim; Jacopin, Gwénolé; Meloni, Simone; Mattoni, Alessandro; Arora, Neha; Boziki, Ariadni; Zakeeruddin, Shaik Mohammed; Rothlisberger, Ursula; Grätzel, Michael

2016-10-01

Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH 3 NH 3 PbI 3 , CH 3 NH 3 PbBr 3 , and CH(NH 2 ) 2 PbBr 3 , which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (<100 K) photoluminescence of CH 3 NH 3 PbI 3 and CH 3 NH 3 PbBr 3 reveals two distinct emission peaks, whereas that of CH(NH 2 ) 2 PbBr 3 shows a single emission peak. Furthermore, irrespective of perovskite composition, the bandgap exhibits an unusual blueshift by raising the temperature from 15 to 300 K. Density functional theory and classical molecular dynamics simulations allow for assigning the additional photoluminescence peak to the presence of molecularly disordered orthorhombic domains and also rationalize that the unusual blueshift of the bandgap with increasing temperature is due to the stabilization of the valence band maximum. Our findings provide new insights into the salient emission properties of perovskite materials, which define their performance in solar cells and light-emitting devices.

Halide addition/abstraction in phosphido derivatives: isolation of the thallium and silver intermediates.

PubMed

Forniés, Juan; Fortuño, Consuelo; Ibáñez, Susana; Martín, Antonio

2008-07-07

Reaction of unsaturated (44e (-) skeleton) [PdPt 2(mu-PPh 2) 2(mu-P 2Ph 4)(R F) 4] 4 with Br (-) produces the saturated (48e (-) skeleton) complex [NBu 4][(R F) 2Pt(mu-PPh 2)(mu-Br)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 5 without any M-M' bond. Attempts to eliminate Br (-) of 5 with Ag (+) in CH 2Cl 2 as a solvent gives a mixture of [(R F) 2Pt (III)(mu-PPh 2) 2Pt (III)(R F) 2] and some other unidentified products as a consequence of oxidation and partial fragmentation. However, when the reaction of 5 with Ag (+) is carried out in CH 3CN, no oxidation is observed but the elimination of Br (-) and the formation of [(R F) 2(CH 3CN)Pt(mu-PPh 2)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 6 (46e (-) skeleton), a complex with a Pt-Pd bond, takes place. It is noteworthy that the reaction of 5 with TlPF 6 in CH 2Cl 2 does not precipitate TlBr but forms the adduct [(R F) 2PtTl(mu-PPh 2)(mu-Br)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 7 with a Pt-Tl bond. Likewise, 5 reacts with [AgOClO 3(PPh 3)] in CH 2Cl 2 forming the adduct [AgPdPt 2(mu-Br)(mu-PPh 2) 2(mu-Ph 2P-PPh 2)(R F) 4(PPh 3)] 8, which contains a Pt-Ag bond. Both adducts are unstable in a CH 3CN solution, precipitating TlBr or AgBr and yielding the unsaturated 6. The treatment of [NBu 4] 2[(R F) 2Pt(mu-PPh 2) 2Pd(mu-PPh 2) 2Pt(R F) 2] in CH 3CN with I 2 (1:1 molar ratio) at 233 K yields a mixture of 4 and 6, which after recrystallization from CH 2Cl 2 is totally converted in 4. If the reaction with I 2 is carried out at room temperature, a mixture of the isomers [NBu 4][(R F) 2Pt(mu-PPh 2)(mu-I)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 9 and [NBu 4][(R F)(PPh 2R F)Pt(mu-PPh 2)(mu-I)Pd(mu-PPh 2) 2Pt(R F) 2] 10 are obtained. The structures of the complexes have been established on the bases of NMR data, and the X-ray structures of 5- 8 have been studied. The relationship between the different complexes has been studied.

Formation of positive cluster ions Li(n) Br (n = 2-7) and ionization energies studied by thermal ionization mass spectrometry.

PubMed

Veličković, S R; Đustebek, J B; Veljković, F M; Veljković, M V

2012-05-01

Clusters of the type Li(n)X (X = halides) can be considered as potential building blocks of cluster-assembly materials. In this work, Li(n)Br (n = 2-7) clusters were obtained by a thermal ionization source of modified design and selected by a magnetic sector mass spectrometer. Positive ions of the Li(n)Br (n = 4-7) cluster were detected for the first time. The order of ion intensities was Li(2)Br(+) > Li(4)Br(+) > Li(5)Br(+) > Li(6)Br(+) > Li(3)Br(+). The ionization energies (IEs) were measured and found to be 3.95 ± 0.20 eV for Li(2)Br, 3.92 ± 0.20 eV for Li(3)Br, 3.93 ± 0.20 eV for Li(4)Br, 4.08 ± 0.20 eV for Li(5)Br, 4.14 ± 0.20 eV for Li(6)Br and 4.19 ± 0.20 eV for Li(7)Br. All of these clusters have a much lower ionization potential than that of the lithium atom, so they belong to the superalkali class. The IEs of Li(n)Br (n = 2-4) are slightly lower than those in the corresponding small Li(n) or Li(n)H clusters, whereas the IEs of Li(n)Br are very similar to those of Li(n) or Li(n)H for n = 5 and 6. The thermal ionization source of modified design is an important means for simultaneously obtaining and measuring the IEs of Li(n)Br (n = 2-7) clusters (because their ions are hermodynamically stable with respect to the loss of lithium atoms in the gas phase) and increasingly contributes toward the development of clusters for practical applications. Copyright © 2012 John Wiley & Sons, Ltd.

Poly(phenylene)-based anion exchange membrane

DOEpatents

Hibbs, Michael [Albuquerque, NM; Cornelius, Christopher J [Albuquerque, NM; Fujimoto, Cy H [Albuquerque, NM

2011-02-15

A poly(phenylene) compound of copolymers that can be prepared with either random or multiblock structures where a first polymer has a repeat unit with a structure of four sequentially connected phenyl rings with a total of 2 pendant phenyl groups and 4 pendant tolyl groups and the second polymer has a repeat unit with a structure of four sequentially connected phenyl rings with a total of 6 pendant phenyl groups. The second polymer has chemical groups attached to some of the pendant phenyl groups selected from CH.sub.3, CH.sub.2Br, and CH.sub.2N(CH.sub.3).sub.3Br groups. When at least one group is CH.sub.2N(CH.sub.3).sub.3Br, the material functions as an anion exchange membrane.

Dynamic Evolution of 2D Layers Within Perovskite Nanocrystals via Salt Pair Extraction and Reinsertion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeler, Lance M; Anderson, Nicholas C; Bliss, Taylor

Metal halide perovskite (MHP) semiconductors exhibit unprecedented optoelectronic properties coupled with low formation energies that enable scalable, cost-efficient solution processing. The low formation energies additionally facilitate dynamic transformation of the chemical composition and crystal structure of the MHP material. In this work, we show that CsBr salt is selectively extracted from CsPbBr3 nanocrystals (NCs) to yield PbBr2 NCs. The PbBr2 NCs are then exposed to different glacial acetic acid ABr salt solutions to generate a variety of emissive compounds with the generic structure A'2An-1PbnBr3n-1X'2, where A = cesium (Cs+), methylammonium (MA+), formamidinium (FA+); A' = A or H+; X' =more » Br- or acetate (CH3COO-); and n is the number of lead halide layers, where n = 1, 2, 3, ...8. We systematically vary the ratios of PbBr2/ABr/CH3COOH and show that certain ratios result in isolable single-phase APbBr3 NCs - an effective A-site cation exchange from the parent CsPbBr3 NCs. Importantly, time-resolved photoluminescence (PL) spectroscopy shows the dynamic evolution of many additional species as evidenced by blue-shifted emission peaks from 2.85-2.49 eV for MA+-based structures. We assign these species to n = 1, 2, 3, 4, and 5 quasi-two-dimensional network (2DN) sheets, in which CH3COO- anions and Br- anions compete for the c-axis X' sites separating haloplumbate(II) layers within the A'2An-1PbnBr3n-1X'2 NCs. Finally, we demonstrate the degree of CH3COO- incorporation, and thus the 2DN layer thickness and PL energy, is controlled in the early reaction times by kinetic factors. After a longer time (3 h), thermodynamic forces dictated by Le Chatelier's principle tune the structure in A'2An-1PbnBr3n-1X'2 NCs from exclusively n = 1 to n = 8 depending on the PbBr2/ABr/CH3COOH ratio.« less

High Resolution Direct Frequency Comb Spectroscopy of Vinyl Bromide (C_2H_3Br) and Nitromethane (CH_3NO_2) in the CH Stretch Region

NASA Astrophysics Data System (ADS)

Changala, Bryan; Spaun, Ben; Patterson, David; Ye, Jun

2016-06-01

We present high resolution rovibrational spectra of buffer gas cooled vinyl bromide (C_2H_3Br) and nitromethane (CH_3NO_2) in the 3 μm CH stretch region, acquired via cavity-enhanced direct frequency comb absorption spectroscopy. The ˜10 K translational and rotational temperatures of the molecular gas, as well as the narrow linewidth of the frequency comb, yield well resolved rotational structure, isotope shifts, and nuclear hyperfine splittings. Given the wide bandwidth of the light source and the long path length of the enhancement cavity, we measure entire vibrational bands in a single shot with high signal-to-noise ratios. We discuss spectra of the entire fundamental CH stretch manifolds of both C_2H_3Br and CH_3NO_2, which provide contrasting examples of rovibrational structure of rigid and non-rigid systems. C_2H_3Br is a relatively normal asymmetric top, exhibiting local perturbations to its rotational structure. Conversely, CH_3NO_2 contains an essentially unhindered methyl rotor. Of particular interest are its quasi-degenerate asymmetric CH stretch modes. Here, one must consider multiple couplings between torsional, rotational, and vibrational angular momentum, leading to qualitatively new level patterns and structure.

Composition-dependent emission linewidth broadening in lead bromide perovskite (APbBr3, A = Cs and CH3NH3) nanoparticles.

PubMed

Ham, Sujin; Chung, Heejae; Kim, Tae-Woo; Kim, Jiwon; Kim, Dongho

2018-02-01

Lead halide perovskite nanoparticles (NPs) are attractive as they exhibit excellent color purity and have a tunable band gap, and can thus be applied in highly efficient photovoltaic and light-emitting diodes. Fundamental studies of emission linewidth broadening due to spectral shifts in perovskite NPs may suggest a way to improve their color purity. However, the carrier-induced Stark shift that causes spectral diffusion still requires investigation. In this study, we explore composition-related emission linewidth broadening by comparing CsPbBr3 and CH 3 NH 3 PbBr 3 (MAPbBr3) perovskite NPs. We find that the MAPbBr3 NPs are more sensitive to fluctuations in the local electric fields than the CsPbBr3 NPs due to an intrinsic difference in the dipole moment between the two A cations (Cs and MA), which shows a carrier-induced Stark shift. The results indicate that the compositions of perovskite NPs are closely associated with emission linewidth broadening and they also provide insights into the development of NP-based devices with high color purity.

Screening in crystalline liquids protects energetic carriers in hybrid perovskites

NASA Astrophysics Data System (ADS)

Zhu, Haiming; Miyata, Kiyoshi; Fu, Yongping; Wang, Jue; Joshi, Prakriti; Niesner, Daniel; Williams, Kristopher; Jin, Song; Zhu, Xiaoyang

Hybrid lead halide perovskites exhibit carrier properties that resemble those of pristine nonpolar semiconductors despite static and dynamic disorder, but how carriers are protected from efficient scattering with charged defects and optical phonons is unknown. Here, we reveal the carrier protection mechanism by comparing three single-crystal lead bromide perovskites: CH3NH3PbBr3, CH(NH2)2PbBr3, and CsPbBr3. We observed hot fluorescence emission from energetic carriers with 102 picosecond lifetimes in CH3NH3PbBr3 or CH(NH,SUB>2)2PbBr3, but not in CsPbBr3. The hot fluorescence is correlated with liquid-like molecular reorientational motions, suggesting that dynamic screening protects energetic carriers via solvation or large polaron formation on time scales competitive with that of ultrafast cooling. Similar protections likely exist for band-edge carriers. The long-lived energetic carriers may enable hot-carrier solar cells with efficiencies exceeding the Shockley-Queisser limit. This work was supported by U.S. Department of Energy Grant ER46980, National Science Foundation, Grant DMR 1420634 (MRSEC), and Department of Energy Award DE-FG02-09ER46664.

Scaled Hartree-Fock force field calculations for organothallium compounds: Normal-mode analysis for TlCH sub 3 Tl(CH sub 3 ) sub 2 sup + , Tl(CH sub 3 ) sub 3 , Tl(CH sub 3 ) sub 2 Br, and Tl(CH sub 3 ) sub 4 sup minus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwerdtfeger, P.; Bowmaker, G.A.; Boyd, P.D.W.

1990-02-01

In a recent paper we presented Hartree-Fock (HF) calculations for aliphatic organothallium compounds. The diagonal HF force constants obtained from a Fletcher-Powell geometry optimization are now used for a normal-mode analysis of TlCH{sub 3}, Tl(CH{sub 3}){sub 2}{sup +}, Tl(CH{sub 3}){sub 3}, Tl(CH{sub 3}){sub 2}Br, and Tl(CH{sub 3}){sub 4}{sup {minus}}. In order to calculate frequencies comparable to experimental values, the HF force field has been scaled by using scaling factors obtained from experimental infrared and Raman measurements on Tl(CH{sub 3}){sub 2}{sup +} and TlBr. The vibrational spectra of Tl(CH{sub 3}){sub 2}{sup +} were remeasured (infrared and Raman) in order to obtainmore » an accurate force field. Predictions are made for the vibrational spectrum of the as yet undetected TlCH{sub 3} molecule. Experimental infrared and Raman results for Tl(CH{sub 3}){sub 3} compare reasonably well with our calculated frequencies. Relativistic and correlation effects are analyzed for the vibrational frequencies of Tl(CH{sub 3}){sub 2}{sup +}.« less

On reaction kinetics and atmospheric lifetimes of CF3CFHCF3 and CF3CH2Br

NASA Technical Reports Server (NTRS)

Nelson, D. D., Jr.; Zahniser, M. S.; Kolb, C. E.

1993-01-01

The rate constants for the reaction of the OH radical with CF3CFHCF3 and with CF3CH2Br have been measured as a function of temperature using the discharge flow technique with laser induced fluorescence detection of the OH radicals. The temperature dependent rate coefficients are well described by a simple Arrhenius expression, k(T) = A exp(E/(RT)). For the reaction of OH with CF3CFHCF3 we find A = 3.7 x 10 exp -13 cu cm/molecules/s and E/R = 1615 K; for the reaction of OH with CF3CH2Br we report A = 1.4 x 10 exp -12 cu cm/molecule/s and E/R = 1350 K. These Arrhenius parameters imply rate coefficients at 277 K of 1.09 x 10 exp -15 cu cm/molecule/s for CF3CFHCF3 and 1.06 x 10 exp -14 cu cm/molecule/s for CF3CH2Br. We find atmospheric lifetimes for CF3CFHCH3 and CF3CH2Br of 42 years and 4.1 years, respectively. We also estimate the steady state ozone depletion potential (ODP) of the brominated species relative to CFCl3 as about 0.84 using a semiempirical model.

Band Tailing and Deep Defect States in CH 3NH 3Pb(I 1–xBr x) 3 Perovskites As Revealed by Sub-Bandgap Photocurrent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutter-Fella, Carolin M.; Miller, D. Westley; Ngo, Quynh P.

Organometal halide perovskite semiconductors have emerged as promising candidates for optoelectronic applications because of the outstanding charge carrier transport properties, achieved with low-temperature synthesis. In this paper, we present highly sensitive sub-bandgap external quantum efficiency (EQE) measurements of Au/spiro-OMeTAD/CH 3NH 3Pb(I 1–xBr x) 3/TiO 2/FTO/glass photovoltaic devices. The room-temperature spectra show exponential band tails with a sharp onset characterized by low Urbach energies (E u) over the full halide composition space. The Urbach energies are 15–23 meV, lower than those for most semiconductors with similar bandgaps (especially with E g > 1.9 eV). Intentional aging of CH 3NH 3Pb(I 1–xBrmore » x) 3 for up to 2300 h, reveals no change in E u, despite the appearance of the PbI 2 phase due to decomposition, and confirms a high degree of crystal ordering. Moreover, sub-bandgap EQE measurements reveal an extended band of sub-bandgap electronic states that can be fit with one or two point defects for pure CH 3NH 3PbI 3 or mixed CH 3NH 3Pb(I 1–xBr x) 3 compositions, respectively. Finally, the study provides experimental evidence of defect states close to the midgap that could impact photocarrier recombination and energy conversion efficiency in higher bandgap CH 3NH 3Pb(I 1–xBr x) 3 alloys.« less

Band Tailing and Deep Defect States in CH 3NH 3Pb(I 1–xBr x) 3 Perovskites As Revealed by Sub-Bandgap Photocurrent

DOE PAGES

Sutter-Fella, Carolin M.; Miller, D. Westley; Ngo, Quynh P.; ...

2017-02-15

Organometal halide perovskite semiconductors have emerged as promising candidates for optoelectronic applications because of the outstanding charge carrier transport properties, achieved with low-temperature synthesis. In this paper, we present highly sensitive sub-bandgap external quantum efficiency (EQE) measurements of Au/spiro-OMeTAD/CH 3NH 3Pb(I 1–xBr x) 3/TiO 2/FTO/glass photovoltaic devices. The room-temperature spectra show exponential band tails with a sharp onset characterized by low Urbach energies (E u) over the full halide composition space. The Urbach energies are 15–23 meV, lower than those for most semiconductors with similar bandgaps (especially with E g > 1.9 eV). Intentional aging of CH 3NH 3Pb(I 1–xBrmore » x) 3 for up to 2300 h, reveals no change in E u, despite the appearance of the PbI 2 phase due to decomposition, and confirms a high degree of crystal ordering. Moreover, sub-bandgap EQE measurements reveal an extended band of sub-bandgap electronic states that can be fit with one or two point defects for pure CH 3NH 3PbI 3 or mixed CH 3NH 3Pb(I 1–xBr x) 3 compositions, respectively. Finally, the study provides experimental evidence of defect states close to the midgap that could impact photocarrier recombination and energy conversion efficiency in higher bandgap CH 3NH 3Pb(I 1–xBr x) 3 alloys.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linaburg, Matthew R.; McClure, Eric T.; Majher, Jackson D.

The structures of the lead halide perovskites CsPbCl3 and CsPbBr3 have been determined from X-ray powder diffraction data to be orthorhombic with Pnma space group symmetry. Their structures are distorted from the cubic structure of their hybrid analogs, CH3NH3PbX3 (X = Cl, Br), by tilts of the octahedra (Glazer tilt system a–b+a–). Substitution of the smaller Rb+ for Cs+ increases the octahedral tilting distortion and eventually destabilizes the perovskite structure altogether. To understand this behavior, bond valence parameters appropriate for use in chloride and bromide perovskites have been determined for Cs+, Rb+, and Pb2+. As the tolerance factor decreases, themore » band gap increases, by 0.15 eV in Cs1–xRbxPbCl3 and 0.20 eV in Cs1–xRbxPbBr3, upon going from x = 0 to x = 0.6. The band gap shows a linear dependence on tolerance factor, particularly for the Cs1–xRbxPbBr3 system. Comparison with the cubic perovskites CH3NH3PbCl3 and CH3NH3PbBr3 shows that the band gaps of the methylammonium perovskites are anomalously large for APbX3 perovskites with a cubic structure. This comparison suggests that the local symmetry of CH3NH3PbCl3 and CH3NH3PbBr3 deviate significantly from the cubic symmetry of the average structure.« less

Improvement of photovoltaic performance of the inverted planar perovskite solar cells by using CH3NH3PbI3-xBrx films with solvent annealing

NASA Astrophysics Data System (ADS)

Wang, Shan; Zhang, Weijia; Ma, Denghao; Jiang, Zhaoyi; Fan, Zhiqiang; Ma, Qiang; Xi, Yilian

2018-01-01

In this paper, the CH3NH3PbI3-xBrx films with various Br-doping contents were successfully prepared by solution processed deposition and followed by annealing process. This method simultaneously modified the morphology and composition of the CH3NH3PbI3 film. The effects of annealing treatment of CH3NH3PbI3-xBrx films under N2 and DMSO conditions on the microstructure of films and photoelectric properties of the solar cells were systematically investigated. The relationship of the component ratio of RBr/I= CH3NH3PbI3-xBrx/CH3NH3PbI3 in the resulting perovskite versus CH3NH3Br concentration also was explored. The results revealed that the CH3NH3PbI3-xBrx films annealed under DMSO exhibited increased grain sizes, enhanced crystallinity, enlarged bandgap and reduced defect density compared with that of the N2 annealing. It also was found that the RBr/I linearly increased in the resulting perovskite with the increased of CH3NH3Br concentration in the methylammonium halide mixture solutions. Furthermore, the photovoltaic performances of devices fabricated using DMSO precursor solvent were worse than that of DMF under N2 annealing atmosphere. When CH3NH3Br concentration was 7.5 mg ml-1, the planar perovskite solar cell based on CH3NH3PbI3-xBrx annealed under DMSO showed the best efficiency of 13.7%.

First principles study on mixed orthorhombic perovskite CH3NH3 Pb(I1-xBrx) 3

NASA Astrophysics Data System (ADS)

Fang, Zhou; Yi, Zhijun

2017-11-01

Chemically tuned inorganic-organic hybrid halide perovskites based on iodine and bromine halide anions have been studied using first-principles calculations. Firstly, our results show that the volume of CH3NH3 Pb(I1-xBrx) 3 decreases linearly with the concentration of Br ions, and the band gap can be tuned from 1.9 eV to 2.3 eV by substituting I with Br, resulting in the shift of absorption onset from 650 nm (1.9 eV) to 540 nm (2.3 eV). Secondly, our calculations show that the color of crystal can be tuned from wine to yellow by substituting I with Br.

Spatial proton exchange membrane fuel cell performance under bromomethane poisoning

NASA Astrophysics Data System (ADS)

Reshetenko, Tatyana V.; Artyushkova, Kateryna; St-Pierre, Jean

2017-02-01

The poisoning effects of 5 ppm CH3Br in the air on the spatial performance of a proton exchange membrane fuel cell (PEMFC) were studied using a segmented cell system. The presence of CH3Br caused performance loss from 0.650 to 0.335 V at 1 A cm-2 accompanied by local current density redistribution. The observed behavior was explained by possible bromomethane hydrolysis with the formation of Br-. Bromide and bromomethane negatively affected the oxygen reduction efficiency over a wide range of potentials because of their adsorption on Pt, which was confirmed by XPS. Moreover, the PEMFC exposure to CH3Br led to a decrease in the anode and cathode electrochemical surface area (∼52-57%) due to the growth of Pt particles through agglomeration and Ostwald ripening. The PEMFC did not restore its performance after stopping bromomethane introduction to the air stream. However, the H2/N2 purge of the anode/cathode and CV scans almost completely recovered the cell performance. The observed final loss of ∼50 mV was due to an increased activation overpotential. PEMFC exposure to CH3Br should be limited to concentrations much less than 5 ppm due to serious performance loss and lack of self-recovery.

Substitution and Redox Chemistry of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)].

PubMed

Prokopuk, Nicholas; Kennedy, Vance O.; Stern, Charlotte L.; Shriver, Duward F.

1998-09-21

Two sequential electrochemical reductions occur for the cluster anion [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) at 0.89 and 0.29 V vs Ag/AgCl, with the generation [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) and [Ta(6)Cl(12)(OSO(2)CF(3))(6)](4)(-). Chemical reduction of [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) by ferrocene produces [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) with the concomitant shift of the nu(SO(2)) stretch from 1002 to 1018 cm(-)(1). Reaction of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)] (1) with [Bu(4)N]X (X = Cl, Br, I, NCS) occurs by reduction and substitution, yielding [Bu(4)N](3)[Ta(6)Cl(12)X(6)], where the clusters with X = Br, I, and NCS are new. Spectroscopic (IR and UV-vis) evidence indicates that the reduced cluster core {Ta(6)Cl(12)}(2+) is produced in reaction mixtures of 1 with the halide and pseudohalide ions. Concomitant substitution of the triflate ligands of 1 by X(-) occurs and the rates for the overall reduction and substitution increase in the order X(-) = Cl(-) < Br(-) < NCS(-) < I(-) < CN(-). Reduction of 1 with ferrocene followed by addition of [Bu(4)N]O(2)CCH(3) produces the new cluster [Ta(6)Cl(12)(O(2)CCH(3))(6)](3)(-) isolated as the tetrabutylammonium salt. Cyclic voltammetry and UV-vis spectroscopy on the new clusters [Bu(4)N](3)[Ta(6)Cl(12)X(6)] (X = Br, I, NCS, and O(2)CCH(3)) are reported. Crystal data for [Bu(4)N](3)[Ta(6)Cl(12)(NCS)(6)].CH(2)Cl(2): monoclinic, space group, P2(1)/c (No. 14); a = 25.855(6) Å, b = 21.843(6) Å, c = 16.423(3) Å; beta = 100.03(2) degrees; V = 9133(3) Å(3); Z = 4.

Structural and Thermal Disorder of Solution-Processed CH3NH3PbBr3 Hybrid Perovskite Thin Films.

PubMed

Wolf, Christoph; Kim, Joo-Sung; Lee, Tae-Woo

2017-03-29

We extracted the electronic disorder energy of the organic-inorganic lead-halide hybrid perovskite CH 3 NH 3 PbBr 3 from temperature-dependent absorption data. We showed that the disorder at room temperature is ∼30 meV and is due to strong electron-phonon coupling with the longitudinal-optical mode of energy 16 meV. This mode can be attributed to longitudinal-optical phonons of the inorganic PbBr 6 frame; this conclusion highlights the polaronic nature of electronic excitations in CH 3 NH 3 PbBr 3 . We showed that structural disorder is of the same impact as thermal disorder. A temperature-dependence of the exciton binding energy was observed close to the orthorhombic-to-tetragonal phase-transition temperature.

Transient isomers in the photodissociation of bromoiodomethane

NASA Astrophysics Data System (ADS)

Marcellini, Moreno; Nasedkin, Alexandr; Zietz, Burkhard; Petersson, Jonas; Vincent, Jonathan; Palazzetti, Federico; Malmerberg, Erik; Kong, Qingyu; Wulff, Michael; van der Spoel, David; Neutze, Richard; Davidsson, Jan

2018-04-01

The photochemistry of halomethanes is fascinating for the complex cascade reactions toward either the parent or newly synthesized molecules. Here, we address the structural rearrangement of photodissociated CH2IBr in methanol and cyclohexane, probed by time-resolved X-ray scattering in liquid solution. Upon selective laser cleavage of the C-I bond, we follow the reaction cascade of the two geminate geometrical isomers, CH2I-Br and CH2Br-I. Both meta-stable isomers decay on different time scales, mediated by solvent interaction, toward the original parent molecule. We observe the internal rearrangement of CH2Br-I to CH2I-Br in cyclohexane by extending the time window up to 3 μs. We track the photoproduct kinetics of CH2Br-I in methanol solution where only one isomer is observed. The effect of the polarity of solvent on the geminate recombination pathways is discussed.

Revealing the properties of defects formed by CH3NH2 molecules in organic-inorganic hybrid perovskite MAPbBr3

NASA Astrophysics Data System (ADS)

Wang, Ji; Zhang, Ao; Yan, Jun; Li, Dan; Chen, Yunlin

2017-03-01

The properties of defects in organic-inorganic hybrid perovskite are widely studied from the first-principles calculation. However, the defects of methylamine (methylamine = CH3NH2), which would be easily formed during the preparation of the organic-inorganic hybrid perovskite, are rarely investigated. Thermodynamic properties as well as defect states of methylamine embedded MAPbX3 (MA = methyl-ammonium = CH3NH3, X = Br, I) are studied based on first-principles calculations of density functional theory. It was found that there is a shallow defect level near the highest occupied molecular orbital, which induced by the interstitial methylamine defect in MAPbBr3, will lead to an increase of photoluminescence. The calculation results showed that interstitial defect states of methylamine may move deeper due to the interaction between methylamine molecules and methyl-ammonium cations. It was also showed that the interstitial methylamine defect is stable at room temperature, and the defect can be removed easily by annealing.

Nucleophilic ring opening of bridging thietane ligands in trirhenium carbonyl cluster complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, R.D.; Cortopassi, J.E.; Falloon, S.B.

1992-11-01

The reactions of 3,3-dimethylthietane, SCH{sub 2}CMe{sub 2}CH{sub 2} (3,3-DMT), and thietane, SCH{sub 2}CH{sub 2}CH{sub 2}, with Re{sub 3}(CO){sub 10}[{mu}-SCH{sub 2}CH{sub 2}CH{sub 2}]({mu}-H){sub 3}, 2b. Compound 2a was characterized crystallographically and was found to consist of a trirhenium cluster with three bridging hydride ligands and a bridging thietane ligand coordinated through its sulfur atom. 2a and 2b react with halide ions by ring-opening additions to the 3,3-DMT ligand to yield the complex anions [Re{sub 3}(CO){sub 10}({mu}-SCH{sub 2}CMe{sub 2}CH{sub 2}x)({mu}-h){sub 3}]{sup -} 3A-6A, X = F (71%), Cl(71%), Br(84%), I(87%) and [Re{sub 3}(CO){sub 10}({mu}-SCH{sub 2}CH{sub 2}CH{sub 2}Cl)({mu}-H){sub 3}]{sup -}, 4b (67%). Similarly,more » addition of NMe{sub 3} to 2a and 2b yielded the ring-opened zwitterions Re{sub 3}(CO){sub 10}({mu}-SCH{sub 2}CMe{sub 2}CH{sub 2}NMe{sub 3})({mu}-H){sub 3}, 7 a crystographically. They are zwitterions positively charged at the nitrogen atoms and negatively charged on the trirhenium clusters. Complex 7b was also obtained in a 48% yield from the reaction of Re{sub 3}(C){sub 12}({mu}-H){sub 3} with Me{sub 3}NO in the presence of thietane, but the corresponding reaction using 3,3-DMT yielded only 2a and Re{sub 3}(CO){sub 11}(SCH{sub 2}CMe{sub 2}CH{sub 2})({mu}-H){sub 3}, 8. Attempts to obtain a ring-opening addition to 2a by reaction with PMe{sub 2}Ph yielded only Re{sub 3}(CO){sub 10}(PMe{sub 2}PH){sub 2}({mu}-H){sub 3} by ligand substitution. Attempts to obtain ring opening addition to 8 by reaction with I{sup -} yielded only [Re{sub 3}(CO){sub 11}I({mu}-H){sub 3}]{sup -} by ligand substitution. 20 refs., 3 figs., 10 tabs.« less

Shallow halogen vacancies in halide optoelectronic materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, Hongliang; Du, Mao -Hua

2014-11-05

Halogen vacancies (V H) are usually deep color centers (F centers) in halides and can act as major electron traps or recombination centers. The deep V H contributes to the typically poor carrier transport properties in halides. However, several halides have recently emerged as excellent optoelectronic materials, e.g., CH 3NH 3PbI 3 and TlBr. Both CH 3NH 3PbI 3 and TlBr have been found to have shallow V H, in contrast to commonly seen deep V H in halides. In this paper, several halide optoelectronic materials, i.e., CH 3NH 3PbI 3, CH 3NH 3SnI 3 (photovoltaic materials), TlBr, and CsPbBrmore » 3, (gamma-ray detection materials) are studied to understand the material chemistry and structure that determine whether V H is a shallow or deep defect in a halide material. It is found that crystal structure and chemistry of ns 2 ions both play important roles in creating shallow V H in halides such as CH 3NH 3PbI 3, CH 3NH 3SnI 3, and TlBr. The key to identifying halides with shallow V H is to find the right crystal structures and compounds that suppress cation orbital hybridization at V H, such as those with long cation-cation distances and low anion coordination numbers, and those with crystal symmetry that prevents strong hybridization of cation dangling bond orbitals at V H. Furthermore, the results of this paper provide insight and guidance to identifying halides with shallow V H as good electronic and optoelectronic materials.« less

Chemical and biological characterization of technetium(I) and Rhenium(I) tricarbonyl complexes with dithioether ligands serving as linkers for coupling the Tc(CO)(3) and Re(CO)(3) moieties to biologically active molecules.

PubMed

Pietzsch, H J; Gupta, A; Reisgys, M; Drews, A; Seifert, S; Syhre, R; Spies, H; Alberto, R; Abram, U; Schubiger, P A; Johannsen, B

2000-01-01

The organometallic precursor (NEt(4))(2)[ReBr(3)(CO)(3)] was reacted with bidendate dithioethers (L) of the general formula H(3)C-S-CH(2)CH(2)-S-R (R = -CH(2)CH(2)COOH, CH(2)-C&tbd1;CH) and R'-S-CH(2)CH(2)-S-R' (R' = CH(3)CH(2)-, CH(3)CH(2)-OH, and CH(2)COOH) in methanol to form stable rhenium(I) tricarbonyl complexes of the general composition [ReBr(CO)(3)L]. Under these conditions, the functional groups do not participate in the coordination. As a prototypic representative of this type of Re compounds, the propargylic group bearing complex [ReBr(CO(3))(H(3)C-S-CH(2)CH(2)-S-CH(2)C&tbd1;CH)] Re2 was studied by X-ray diffraction analysis. Its molecular structure exhibits a slightly distorted octahedron with facial coordination of the carbonyl ligands. The potentially tetradentate ligand HO-CH(2)CH(2)-S-CH(2)CH(2)-S-CH(2)CH(2)-OH was reacted with the trinitrato precursor [Re(NO(3))(3)(CO)(3)](2-) to yield a cationic complex [Re(CO)(3)(HO-CH(2)CH(2)-S-CH(2)CH(2)-S-CH(2)CH(2)-OH)]NO(3) Re8 which shows the coordination of one hydroxy group. Re8 has been characterized by correct elemental analysis, infrared spectroscopy, capillary electrophoresis, and X-ray diffraction analysis. Ligand exchange reaction of the carboxylic group bearing ligands H(3)C-S-CH(2)CH(2)-S-CH(2)CH(2)-COOH and HOOC-CH(2)-S-CH(2)CH(2)-S-CH(2)-COOH with (NEt(4))(2)[ReBr(3)(CO)(3)] in water and with equimolar amounts of NaOH led to complexes in which the bromide is replaced by the carboxylic group. The X-ray structure analysis of the complex [Re(CO)(3)(OOC-CH(2)-S-CH(2)CH(2)-S-CH(2)-COOH)] Re6 shows the second carboxylic group noncoordinated offering an ideal site for functionalization or coupling a biomolecule. The no-carrier-added preparation of the analogous (99m)Tc(I) carbonyl thioether complexes could be performed using the precursor fac-[(99m)Tc(H(2)O)(3)(CO)(3)](+), with yields up to 90%. The behavior of the chlorine containing (99m)Tc complex [(99m)TcCl(CO)(3)(CH(3)CH(2)-S-CH(2)CH(2)-S-CH(2)CH(3))] Tc1 in aqueous solution at physiological pH value was investigated. In saline, the chromatographically separated compound was stable for at least 120 min. However, in chloride-free aqueous solution, a water-coordinated cationic species Tc1a of the proposed composition [(99m)Tc(H(2)O)(CO)(3)(CH(3)CH(2)-S-CH(2)CH(2)-S-CH(2)CH(3))](+) occurred. The cationic charge of the conversion product was confirmed by capillary electrophoresis. By the introduction of a carboxylic group into the thioether ligand as a third donor group, the conversion could be suppressed and thus the neutrality of the complex preserved. Biodistribution studies in the rat demonstrated for the neutral complexes [(99m)TcCl(CO)(3)(CH(3)CH(2)-S-CH(2)CH(2)-S-CH(2)CH(3))] Tc1 and [(99m)TcCl(CO)(3)(CH(2)-S-CH(2)CH(2)-S-CH(2)-C&tbd1;CH)] Tc2 a significant initial brain uptake (1.03 +/- 0.25% and 0.78 +/- 0.08% ID/organ at 5 min. p.i.). Challenge experiments with glutathione clearly indicated that no transchelation reaction occurs in vivo.

Methyl chloride and methyl bromide emissions from baking: an unrecognized anthropogenic source.

PubMed

Thornton, Brett F; Horst, Axel; Carrizo, Daniel; Holmstrand, Henry

2016-05-01

Methyl chloride and methyl bromide (CH3Cl and CH3Br) are the largest natural sources of chlorine and bromine, respectively, to the stratosphere, where they contribute to ozone depletion. We report the anthropogenic production of CH3Cl and CH3Br during breadbaking, and suggest this production is an abiotic process involving the methyl ester functional groups in pectin and lignin structural polymers of plant cells. Wide variations in baking styles allow only rough estimates of this flux of methyl halides on a global basis. A simple model suggests that CH3Br emissions from breadbaking likely peaked circa 1990 at approximately 200tonnes per year (about 0.3% of industrial production), prior to restrictions on the dough conditioner potassium bromate. In contrast, CH3Cl emissions from breadbaking may be of similar magnitude as acknowledged present-day CH3Cl industrial emissions. Because the mechanisms involve functional groups and compounds widely found in plant materials, this type of methyl halide production may occur in other cooking techniques as well. Copyright © 2016 Elsevier B.V. All rights reserved.

Enhancement of photocurrent extraction and electron injection in dual-functional CH3NH3PbBr3 perovskite-based optoelectronic devices via interfacial engineering

NASA Astrophysics Data System (ADS)

Tsai, Chia-Lung; Lu, Yi-Chen; Hsiung Chang, Sheng

2018-07-01

Photocurrent extraction and electron injection in CH3NH3PbBr3 (MAPbBr3) perovskite-based optoelectronic devices are both significantly increased by improving the contact at the PCBM/MAPbBr3 interface with an extended solvent annealing (ESA) process. Photoluminescence quenching and x-ray diffraction experiments show that the ESA not only improves the contact at the PCBM/MAPbBr3 interface but also increases the crystallinity of the MAPbBr3 thin films. The optimized dual-functional PCBM-MAPbBr3 heterojunction based optoelectronic device has a high power conversion efficiency of 4.08% and a bright visible luminescence of 1509 cd m‑2. In addition, the modulation speed of the MAPbBr3 based light-emitting diodes is larger than 14 MHz, which indicates that the defect density in the MAPbBr3 thin film can be effectively reduced by using the ESA process.

Enhancement of photocurrent extraction and electron injection in dual-functional CH3NH3PbBr3 perovskite-based optoelectronic devices via interfacial engineering.

PubMed

Tsai, Chia-Lung; Lu, Yi-Chen; Chang, Sheng Hsiung

2018-07-06

Photocurrent extraction and electron injection in CH 3 NH 3 PbBr 3 (MAPbBr 3 ) perovskite-based optoelectronic devices are both significantly increased by improving the contact at the PCBM/MAPbBr 3 interface with an extended solvent annealing (ESA) process. Photoluminescence quenching and x-ray diffraction experiments show that the ESA not only improves the contact at the PCBM/MAPbBr 3 interface but also increases the crystallinity of the MAPbBr 3 thin films. The optimized dual-functional PCBM-MAPbBr 3 heterojunction based optoelectronic device has a high power conversion efficiency of 4.08% and a bright visible luminescence of 1509 cd m -2 . In addition, the modulation speed of the MAPbBr 3 based light-emitting diodes is larger than 14 MHz, which indicates that the defect density in the MAPbBr 3 thin film can be effectively reduced by using the ESA process.

A novel strategy to construct Janus metallamacrocycles with both a Ru-arene face and an imidazolium face.

PubMed

Li, Ji; Zhang, Peipei; Xu, Yan; Su, Zhi; Qian, Yong; Li, Shunli; Yu, Tao; Sadler, Peter J; Liu, Hong-Ke

2017-11-28

The bottom-up construction of highly functional metallamacrocycles from simple building blocks is a challenge of much current interest. We have used solvothermal reactions of a bifunctional p-bitmb ligand with [Ru(arene)X 2 ] 2 in CH 2 Cl 2 or CH 2 Br 2 to generate the novel mononuclear metallamacrocyclic [RuX(arene)L 2 CH 2 ]X 3 complexes 1-3 (1, arene = p-cym, X = Cl; 2, arene = bip, X = Cl; 3, arene = p-cym, X = Br), which were characterized by various techniques. These complexes are "bowl-like" and have two faces: one coordinative Ru centre (arene)Ru(N,N)X bridged by L (L = 1,4-bis(imidazol-1-ylmethyl)-2,3,5,6-tetramethylbenzene, p-bitmb) to a dipositive bis-imidazolinium centre. Cl - or Br - anions can be trapped inside the cavity of the "bowl-like" structure, forming H-bonds with the backbone. Experimental (NMR and ESI-MS) and computational (DFT calculations) studies show that the source of the bridging -CH 2 - group is the dihalogenated solvent (CH 2 Cl 2 or CH 2 Br 2 ) that links the two arms of an initially formed non-cyclic complex (arene)RuX 2 L 2 by a mechanism of nucleophilic substitution. Optimization of the reaction conditions afforded the macrocyclic complexes in almost quantitative yields. The applications of these complexes as anti-proliferative agents towards cancer cells and for selective anion sensing have been explored.

Two new 3-D cadmium bromoplumbates: the only example of heterometallic bromoplumbate based on crown [Cd(Pb4O4)Br2] clusters.

PubMed

Xiao, Hong; Zhou, Jian; Liu, Xing

2018-04-03

Two new cadmium bromoplumbates [CdPb2Br2L2]n (1, L = ethylene glycol) and [CdPb6Br6L4]n (2) have been solvothermally synthesized and structurally characterized. 1 contains 1-D neutral heterometallic chains [CdPb2Br2L2]n, which are further connected via weak Pb-Br bonds, resulting in a 3-D network structure. The 3-D framework of 2 is constructed by the interconnection of a 2-D neutral layer [CdPb6Br6L4]nvia weak Pb-Br bonds. The [CdPb6Br6L4]n layer is based on the linkages of dimeric [Pb2Br4] units and heterometallic crown [Cd(Pb4O4)Br2] clusters containing a rare eight-membered [Pb4O4] ring. Although a few heterometallic bromoplumbate clusters have been reported, they usually exhibit molecular moieties. 2 represents the only example of 3-D heterometallic bromoplumbate based on the combination of heterometallic crown [Cd(Pb4O4)Br2] clusters and dimeric [Pb2Br4] units. Their optical properties are studied and density functional theory calculations for 1 and 2 have also been performed.

Molecular elimination of Br2 in photodissociation of CH2BrC(O)Br at 248 nm using cavity ring-down absorption spectroscopy.

PubMed

Fan, He; Tsai, Po-Yu; Lin, King-Chuen; Lin, Cheng-Wei; Yan, Chi-Yu; Yang, Shu-Wei; Chang, A H H

2012-12-07

The primary elimination channel of bromine molecule in one-photon dissociation of CH(2)BrC(O)Br at 248 nm is investigated using cavity ring-down absorption spectroscopy. By means of spectral simulation, the ratio of nascent vibrational population in v = 0, 1, and 2 levels is evaluated to be 1:(0.5 ± 0.1):(0.2 ± 0.1), corresponding to a Boltzmann vibrational temperature of 581 ± 45 K. The quantum yield of the ground state Br(2) elimination reaction is determined to be 0.24 ± 0.08. With the aid of ab initio potential energy calculations, the obtained Br(2) fragments are anticipated to dissociate on the electronic ground state, yielding vibrationally hot Br(2) products. The temperature-dependence measurements support the proposed pathway via internal conversion. For comparison, the Br(2) yields are obtained analogously from CH(3)CHBrC(O)Br and (CH(3))(2)CBrC(O)Br to be 0.03 and 0.06, respectively. The trend of Br(2) yields among the three compounds is consistent with the branching ratio evaluation by Rice-Ramsperger-Kassel-Marcus method. However, the latter result for each molecule is smaller by an order of magnitude than the yield findings. A non-statistical pathway so-called roaming process might be an alternative to the Br(2) production, and its contribution might account for the underestimate of the branching ratio calculations.

Brightly Luminescent and Color-Tunable Colloidal CH3NH3PbX3 (X = Br, I, Cl) Quantum Dots: Potential Alternatives for Display Technology.

PubMed

Zhang, Feng; Zhong, Haizheng; Chen, Cheng; Wu, Xian-gang; Hu, Xiangmin; Huang, Hailong; Han, Junbo; Zou, Bingsuo; Dong, Yuping

2015-04-28

Organometal halide perovskites are inexpensive materials with desirable characteristics of color-tunable and narrow-band emissions for lighting and display technology, but they suffer from low photoluminescence quantum yields at low excitation fluencies. Here we developed a ligand-assisted reprecipitation strategy to fabricate brightly luminescent and color-tunable colloidal CH3NH3PbX3 (X = Br, I, Cl) quantum dots with absolute quantum yield up to 70% at room temperature and low excitation fluencies. To illustrate the photoluminescence enhancements in these quantum dots, we conducted comprehensive composition and surface characterizations and determined the time- and temperature-dependent photoluminescence spectra. Comparisons between small-sized CH3NH3PbBr3 quantum dots (average diameter 3.3 nm) and corresponding micrometer-sized bulk particles (2-8 μm) suggest that the intense increased photoluminescence quantum yield originates from the increase of exciton binding energy due to size reduction as well as proper chemical passivations of the Br-rich surface. We further demonstrated wide-color gamut white-light-emitting diodes using green emissive CH3NH3PbBr3 quantum dots and red emissive K2SiF6:Mn(4+) as color converters, providing enhanced color quality for display technology. Moreover, colloidal CH3NH3PbX3 quantum dots are expected to exhibit interesting nanoscale excitonic properties and also have other potential applications in lasers, electroluminescence devices, and optical sensors.

Optoelectronic and Defect Properties in Earth Abundant Photovoltaic Materials: First-principle Calculations

NASA Astrophysics Data System (ADS)

Shi, Tingting

In this dissertation, a series of earth-abundant photovoltaic materials including lead halide perovskites, copper based compounds, and silicon are investigated via density functional theory (DFT). Firstly, we study the unique optoelectronic properties of perovskite CH3NH3PbI3 and CH3NH3PbBr 3. First-principle calculations show that CH3NH3PbI 3 perovskite solar cells exhibit remarkable optoelectronic properties that account for the high open circuit voltage (Voc) and long electron-hole diffusion lengths. Our results reveal that for intrinsic doping, dominant point defects produce only shallow levels. Therefore lead halide perovskites are expected to exhibit intrinsic low non-radiative recombination rates. The conductivity of perovskites can be tuned from p-type to n-type by controlling the growth conditions. For extrinsic defects, the p-type perovskites can be achieved by doping group-IA, -IB, or -VIA elements, such as Na, K, Rb, Cu, and O at I-rich growth conditions. We further show that despite a large band gap of 2.2 eV, the dominant defects in CH3 NH3PbBr3 also create only shallow levels. The photovoltaic properties of CH3NH3PbBr3 - based perovskite absorbers can be tuned via defect engineering. Highly conductive p-type CH3NH3PbBr3 can be synthesized under Br-rich growth conditions. Such CH3NH3PbBr 3 may be potential low-cost hole transporting materials for lead halide perovskite solar cells. All these unique defect properties of perovskites are largely due to the strong Pb lone-pair s orbital and I p (Br p) orbital antibonding coupling and the high ionicity of CH3NH3PbX3 (X=I, Br). Secondly, we study the optoelectronic properties of Cu-V-VI earth abundant compounds. These low cost thin films may have the good electronic and optical properties. We have studied the structural, electronic and optical properties of Cu3-V-VI4 compounds. After testing four different crystal structures, enargite, wurtzite-PMCA, famatinite and zinc-blend-PMCA, we find that Cu3PS4 and Cu3PSe4 prefer energetically the enargite structure, whereas, other compounds favor the famatinite structure. Among the compounds and structures considered, enargite Cu3PSe4, and famatinite Cu3AsS4, are suitable for single junction solar cell applications due to bandgaps of 1.32 eV and 1.15 eV, respectively. Furthermore, CuSbS2 are also studied by density functional theory and HSE06 hybrid functional. The chalcostibite CuSbS2 has an indirect band gap of 1.85 eV, whereas the chalcogenide Cu3SbS4 has a direct band gap of 0.89 eV. We find that the large difference on band gaps is mainly attributed to the different Sb charge states. We further predict that the Sb charge states will affect the defect physics. Particularly, the Sb lone pair s orbitals in CuSbS 2 have strong influence on the formation energies of Sb-related defects. Lastly, we have studied the atomic structure and electronic properties of aluminum (Al)-related defect complexes in silicon. We find a unique stable complex configuration consisting of an Ali and an oxygen dimer, Ali-2Oi, which introduces deep levels in the band gap of Si. The formation energies of the Ali-2Oi complexes could be lower than that of individual Ali atoms under oxygen-rich conditions. The formation of Ali-2Oi complexes may explain the experimental observation that the coexistence of Al and O results in reduced carrier lifetime in Si wafers.

Real-World Verification of Methyl Bromide (CH3Br) Phase-Out in Europe and its Partial Replacement with Sulfuryl Fluoride (SO2F2)

NASA Astrophysics Data System (ADS)

Reimann, S.; Vollmer, M. K.; Brunner, D.; Henne, S.; Maione, M.; Arduini, I.

2014-12-01

In the last decades methyl bromide (CH3Br) has been widely used for pest control in agriculture, during transport and in susceptible environments such as grain elevators, flour mills. Due to its ozone-depleting properties most applications, except for quarantine-preshipment uses, are practically forbidden within the Montreal Protocol and its amendments. This led to a decline of both world-wide emissions and of global background concentrations. In Europe, emissions have declined concurrently, as CH3Br has not been allowed to be used in Europe from 2007 onwards in agriculture and from 2010 in quarantine/preshipment uses. Continuous measurements from the European high-altitude sites Jungfraujoch (Switzerland) and Monte Cimone (Italy) are used to verify this phase-out in different parts of Europe. Pollution events were still detected at these sites until around 2012, potentially indicating forbidden small scale usage of CH3Br in Europe. However, within the last 2 years the abundance and the height of these events have become very small - showing an overall good acceptance of the CH3Br ban in Europe. On the other hand, sulfuryl fluoride (SO2F2) is used as a partial replacement of CH3Br in the fumigation of food processing structures. It shows very distinct, sporadic peak events at the Jungfraujoch measurement site. SO2F2 does not affect the ozone layer but is a potent greenhouse gas (100-year GWP: 4740) with a lifetime of 36 years. European sources of SO2F2 were estimated by using measurements at Jungfraujoch.

Assemblages of braconidae (Hymenoptera) at agricultural and secondary forest ecosystem

NASA Astrophysics Data System (ADS)

Razali, Rabibah; Din, Abdullah Muhaimin Mohammad; Yaakop, Salmah

2016-11-01

Braconids are parasitoid insects which parasitize other insects by injecting their eggs into the larvae and eventually killing the hosts. Due to this character, braconids play an important role in stabilizing the natural and human-made environment. The objective of this study was to evaluate the diversity and distribution of braconids in two ecosystems. Nine Malaise traps were installed in each ecosystem for 30 days at five sampling sites, namely Bukit Rupa (BR), Bukit Fraser (BF), Ladang Zamrud (LZ), Felda Lui Muda (FLM) and Cherating (Ch). Samples were collected and kept in 75% alcohol for identification process. Two types of ecosystem were selected namely forest (secondary forest) and agricultural (oil palm plantation, star fruit orchard) ecosystems. A total of 1201 individuals were collected in 18 subfamilies and 137 morphospecies. From the results, BR showed the highest H', as it was a natural habitat for the braconids. FLM and LZ also showed high H' values, while Ch was the lowest. Based on the cluster analysis, the clade was divided into two groups; the oil palm plantation (LZ, FLM) and forest ecosystem (BF, BR). Ch was considered an outgroup because the braconid spesies found there were specific to Bactocera spp. Based on the rarefaction curve, LZ had the most stable curve compared to the others due to high sample size.

Coastal water source of short-lived halocarbons in New England

NASA Astrophysics Data System (ADS)

Zhou, Yong; Varner, Ruth K.; Russo, Rachel S.; Wingenter, Oliver W.; Haase, Karl B.; Talbot, Robert; Sive, Barkley C.

2005-11-01

Short-lived halocarbon tracers were used to investigate marine influences on air quality in a coastal region of New England. Atmospheric measurements made at the University of New Hampshire's Observing Station at Thompson Farm (TF) in Durham, New Hampshire, indicate that relatively large amounts of halocarbons are emitted from local estuarine and coastal oceanic regions. Bromine-containing halocarbons of interest in this work include bromoform (CHBr3) and dibromomethane (CH2Br2). The mean mixing ratios of CHBr3 and CH2Br2 from 11 January to 5 March 2002 were 2.6 pptv and 1.6 pptv, and from 1 June to 31 August 2002 mean mixing ratios were 5.9 pptv and 1.4 pptv, respectively. The mean mixing ratio of CHBr3 was not only highest during summer, but both CHBr3 and CH2Br2 exhibited large variability in their atmospheric mixing ratios during this season. We attribute the greater variability to increased production combined with faster atmospheric removal rates. Other seasonal characteristics of CHBr3 and CH2Br2 in the atmosphere, as well as the impact of local meteorology on their distributions at this coastal site, are discussed. Tetrachloroethene (C2Cl4) and trichloroethene (C2HCl3) were used to identify time periods influenced by urban emissions. Additionally, measurements of CHBr3, CH2Br2, C2Cl4, methyl iodide (CH3I), and ethyl iodide (C2H5I) were made at TF and five sites throughout the nearby Great Bay estuarine area between 18 and 19 August 2003. These measurements were used to elucidate the effect of the tidal cycle on the distributions of these gases. The mean mixing ratios of CHBr3, CH2Br2, CH3I, and C2H5I were ˜82%, 46%, 14%, and 17% higher, respectively, near the coast compared to inland sites, providing evidence for a marine source of short-lived halocarbons at TF. Correlation between the tidal cycle and atmospheric concentrations of marine tracers on the night of 18 August 2003 showed that the highest values for the brominated species occurred ˜2-3 hours after high tide. Emission fluxes of CHBr3, CH2Br2, CH3I, and C2H5I on this night were estimated to be 26 ± 57, 4.7 ± 5.4, 5.9 ± 4.6, and 0.065 ± 0.20 nmol m-2 h-1, respectively. Finally, the anthropogenic source strength of CHBr3 was calculated to determine its impact on atmospheric levels observed in this region. Although our results indicate that anthropogenic contributions could potentially range from 15 to 60% of the total dissolved CHBr3 in the Great Bay, based on the observed ratio of CH2Br2/CHBr3 and surface seawater measurements in the Gulf of Maine, it appears unlikely that anthropogenic activities are a significant source of CHBr3 in the region.

Surface decorated platinum carbonyl clusters

NASA Astrophysics Data System (ADS)

Ciabatti, Iacopo; Femoni, Cristina; Iapalucci, Maria Carmela; Longoni, Giuliano; Zacchini, Stefano; Zarra, Salvatore

2012-06-01

Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt13(CO)12{Cd5(μ-Br)5Br2(dmf)3}2]2- (1), [Pt19(CO)17{Cd5(μ-Br)5Br3(Me2CO)2}{Cd5(μ-Br)5Br(Me2CO)4}]2- (2), [H2Pt26(CO)20(CdBr)12]8- (3) and [H4Pt26(CO)20(CdBr)12(PtBr)x]6- (4) (x = 0-2), have been obtained from the reactions between [Pt3n(CO)6n]2- (n = 2-6) and CdBr2.H2O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt26Cd12 metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters.Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt13(CO)12{Cd5(μ-Br)5Br2(dmf)3}2]2- (1), [Pt19(CO)17{Cd5(μ-Br)5Br3(Me2CO)2}{Cd5(μ-Br)5Br(Me2CO)4}]2- (2), [H2Pt26(CO)20(CdBr)12]8- (3) and [H4Pt26(CO)20(CdBr)12(PtBr)x]6- (4) (x = 0-2), have been obtained from the reactions between [Pt3n(CO)6n]2- (n = 2-6) and CdBr2.H2O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt26Cd12 metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters. CCDC 867747 and 867748. For crystallographic data in CIF or other electronic format see DOI: 10.1039/c2nr30400g

Acid-Catalyzed Degradation of Poly(2-butyl-1,3,6-trioxocane.

DTIC Science & Technology

1985-10-21

case, n = 8, was not studied. The detailed investigation of ring formation by Illuminati and his coworkers 1 1 󈧐 show that formation of 8-membered... Illuminati et al. have evaluated the oxygen effect in eq. 8 by studying the effect of replacing X = CH2 with X= 0. a o- (CCHn 2Br B 8 0 X-(CH )-Br .(H) +B...Macrosol. 16, 21 1000. 10. S. Winsten, E. Allred, R. Heck and R. Olick, Tetrahedron, 10. 3, 1. 29 11. G. Illuminati and L. Mandolini, Acct Ce 14, 95. 12

Delivery of halogenated very short-lived substances from the west Indian Ocean to the stratosphere during the Asian summer monsoon

NASA Astrophysics Data System (ADS)

Fiehn, Alina; Quack, Birgit; Hepach, Helmke; Fuhlbrügge, Steffen; Tegtmeier, Susann; Toohey, Matthew; Atlas, Elliot; Krüger, Kirstin

2017-06-01

Halogenated very short-lived substances (VSLSs) are naturally produced in the ocean and emitted to the atmosphere. When transported to the stratosphere, these compounds can have a significant influence on the ozone layer and climate. During a research cruise on RV Sonne in the subtropical and tropical west Indian Ocean in July and August 2014, we measured the VSLSs, methyl iodide (CH3I) and for the first time bromoform (CHBr3) and dibromomethane (CH2Br2), in surface seawater and the marine atmosphere to derive their emission strengths. Using the Lagrangian particle dispersion model FLEXPART with ERA-Interim meteorological fields, we calculated the direct contribution of observed VSLS emissions to the stratospheric halogen burden during the Asian summer monsoon. Furthermore, we compare the in situ calculations with the interannual variability of transport from a larger area of the west Indian Ocean surface to the stratosphere for July 2000-2015. We found that the west Indian Ocean is a strong source for CHBr3 (910 pmol m-2 h-1), very strong source for CH2Br2 (930 pmol m-2 h-1), and an average source for CH3I (460 pmol m-2 h-1). The atmospheric transport from the tropical west Indian Ocean surface to the stratosphere experiences two main pathways. On very short timescales, especially relevant for the shortest-lived compound CH3I (3.5 days lifetime), convection above the Indian Ocean lifts oceanic air masses and VSLSs towards the tropopause. On a longer timescale, the Asian summer monsoon circulation transports oceanic VSLSs towards India and the Bay of Bengal, where they are lifted with the monsoon convection and reach stratospheric levels in the southeastern part of the Asian monsoon anticyclone. This transport pathway is more important for the longer-lived brominated compounds (17 and 150 days lifetime for CHBr3 and CH2Br2). The entrainment of CHBr3 and CH3I from the west Indian Ocean to the stratosphere during the Asian summer monsoon is lower than from previous cruises in the tropical west Pacific Ocean during boreal autumn and early winter but higher than from the tropical Atlantic during boreal summer. In contrast, the projected CH2Br2 entrainment was very high because of the high emissions during the west Indian Ocean cruise. The 16-year July time series shows highest interannual variability for the shortest-lived CH3I and lowest for the longest-lived CH2Br2. During this time period, a small increase in VSLS entrainment from the west Indian Ocean through the Asian monsoon to the stratosphere is found. Overall, this study confirms that the subtropical and tropical west Indian Ocean is an important source region of halogenated VSLSs, especially CH2Br2, to the troposphere and stratosphere during the Asian summer monsoon.

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutter-Fella, Carolin M.; Li, Yanbo; Cefarin, Nicola

Organo-lead halide perovskites have recently attracted great interest for potential applications in thin-film photovoltaics and optoelectronics. Herein, we present a protocol for the fabrication of this material via the low-pressure vapor assisted solution process (LP-VASP) method, which yields ~19% power conversion efficiency in planar heterojunction perovskite solar cells. First, we report the synthesis of methylammonium iodide (CH 3NH 3I) and methylammonium bromide (CH 3NH 3Br) from methylamine and the corresponding halide acid (HI or HBr). Then, we describe the fabrication of pinhole-free, continuous methylammonium-lead halide perovskite (CH 3NH 3PbX 3 with X = I, Br, Cl and their mixture) filmsmore » with the LP-VASP. This process is based on two steps: i) spin-coating of a homogenous layer of lead halide precursor onto a substrate, and ii) conversion of this layer to CH 3NH 3PbI 3-xBr x by exposing the substrate to vapors of a mixture of CH 3NH 3I and CH 3NH 3Br at reduced pressure and 120 °C. Through slow diffusion of the methylammonium halide vapor into the lead halide precursor, we achieve slow and controlled growth of a continuous, pinhole-free perovskite film. The LP-VASP allows synthetic access to the full halide composition space in CH 3NH 3PbI 3-xBr x with 0 ≤ x ≤ 3. Depending on the composition of the vapor phase, the bandgap can be tuned between 1.6 eV ≤ E g ≤ 2.3 eV. In addition, by varying the composition of the halide precursor and of the vapor phase, we can also obtain CH 3NH 3PbI 3-xCl x. Films obtained from the LP-VASP are reproducible, phase pure as confirmed by X-ray diffraction measurements, and show high photoluminescence quantum yield. The process does not require the use of a glovebox.« less

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films

DOE PAGES

Sutter-Fella, Carolin M.; Li, Yanbo; Cefarin, Nicola; ...

2017-09-08

Organo-lead halide perovskites have recently attracted great interest for potential applications in thin-film photovoltaics and optoelectronics. Herein, we present a protocol for the fabrication of this material via the low-pressure vapor assisted solution process (LP-VASP) method, which yields ~19% power conversion efficiency in planar heterojunction perovskite solar cells. First, we report the synthesis of methylammonium iodide (CH 3NH 3I) and methylammonium bromide (CH 3NH 3Br) from methylamine and the corresponding halide acid (HI or HBr). Then, we describe the fabrication of pinhole-free, continuous methylammonium-lead halide perovskite (CH 3NH 3PbX 3 with X = I, Br, Cl and their mixture) filmsmore » with the LP-VASP. This process is based on two steps: i) spin-coating of a homogenous layer of lead halide precursor onto a substrate, and ii) conversion of this layer to CH 3NH 3PbI 3-xBr x by exposing the substrate to vapors of a mixture of CH 3NH 3I and CH 3NH 3Br at reduced pressure and 120 °C. Through slow diffusion of the methylammonium halide vapor into the lead halide precursor, we achieve slow and controlled growth of a continuous, pinhole-free perovskite film. The LP-VASP allows synthetic access to the full halide composition space in CH 3NH 3PbI 3-xBr x with 0 ≤ x ≤ 3. Depending on the composition of the vapor phase, the bandgap can be tuned between 1.6 eV ≤ E g ≤ 2.3 eV. In addition, by varying the composition of the halide precursor and of the vapor phase, we can also obtain CH 3NH 3PbI 3-xCl x. Films obtained from the LP-VASP are reproducible, phase pure as confirmed by X-ray diffraction measurements, and show high photoluminescence quantum yield. The process does not require the use of a glovebox.« less

Rate constants and temperature dependences for the reactions of hydroxyl radical with several halogenated methanes, ethanes, and propanes by relative rate measurements

NASA Technical Reports Server (NTRS)

Hsu, K.-J.; DeMore, W. B.

1995-01-01

Rate constants of 15 OH reactions with halogen-substituted alkanes, C1 to C3, were studied using a relative rate technique in the temperature range 283-403 K. Compounds studied were CHF2Cl (22), CHF2Br (22B), CH3F (41), CH2F2 (32), CHF3 (23), CHClFCCl2F (122a), CHCl2CF3 (123), CHClFCF3 (124), CH3CF3 (143a), CH3CH2F (161), CF3CHFCF3 (227ea), CF3CH2CF3 (236fa), CF3CHFCHF2 (236ea), and CHF2CF2CH2F (245ca). Using CH4, CH3CCl3, CF3CF2H, and C2H6 as primary reference standards (JPL 92-20 rate constants), absolute rate constants are derived. Results are in good agreement with previous experimental results for six of the compounds studied, including CHF2Cl, CHF2Br, CH2F2, CH3CF3, CHFClCFCl2, and CF3CHFCF3. For the remainder the relative rate constants are lower than those derived from experiments in which OH loss was used to measure the reaction rate. Comparisons of the derived Arrhenius A factors with previous literature transition-state calculations show order of magnitude agreement in most cases. However, the experimental A factors show a much closer proportionality to the number of H atoms in the molecule than is evident from the transition state calculations. For most of the compounds studied, an A factor of (8 +/- 3)E-13 cm(exp 3)/(molecule s) per C-H bond is observed. A new measurement of the ratio k(CH3CCl3)/k(CH4) is reported that is in good agreement with previous data.

Chemical Durability Improvement and Static Fatigue of Glasses.

DTIC Science & Technology

1982-05-01

Specifically, the replacement of hydroxyl groups on the glass surface with silane or Grignard reagent nearly completely eliminated stress rate dependence...CK3SiC13 in Heptane solution Cc) 2 vol % (CR3)3SIC1 in Heptane solution (d) 0.1 M CH3MgBr ( Grignard reagent ) in n-Buthyl ether solution • Corning 7900...C113)3- SiCl or C13MgBr ( Grignard reagent ) solution while it remains practi- cally unchanged in CH3SiCI3 solution. In CH3SICI3 , the strength is

TeX4 (X = F, Cl, Br) as Lewis acids--complexes with soft thio- and seleno-ether ligands.

PubMed

Hector, Andrew L; Jolleys, Andrew; Levason, William; Reid, Gillian

2012-08-28

TeF(4) reacts with OPR(3) (R = Me or Ph) in anhydrous CH(2)Cl(2) to give the colourless, square based pyramidal 1 : 1 complexes [TeF(4)(OPR(3))] only, in which the OPR(3) is coordinated basally in the solid state, (R = Me: d(Te-O) = 2.122(2) Å; R = Ph: d(Te-O) = 2.1849(14) Å). Variable temperature (19)F{(1)H}, (31)P{(1)H} and (125)Te{(1)H} NMR spectroscopic studies strongly suggest this is the low temperature structure in solution, although the systems are dynamic. The much softer donor ligands SMe(2) and SeMe(2) show a lower affinity for TeF(4), although unstable, yellow products with spectroscopic features consistent with [TeF(4)(EMe(2))] are obtained by the reaction of TeF(4) in neat SMe(2) or via reaction in CH(2)Cl(2) with SeMe(2). TeX(4) (X = F, Cl or Br) causes oxidation and halogenation of TeMe(2) to form X(2)TeMe(2). The Br(2)TeMe(2) hydrolyses in trace moisture to form [BrMe(2)Te-O-TeMe(2)Br], the crystal structure of which has been determined. TeX(4) (X = Cl or Br) react with the selenoethers SeMe(2), MeSe(CH(2))(3)SeMe or o-C(6)H(4)(SeMe)(2) (X = Cl) in anhydrous CH(2)Cl(2) to give the distorted octahedral monomers trans-[TeX(4)(SeMe(2))(2)], cis-[TeX(4){MeSe(CH(2))(3)SeMe}] and cis-[TeCl(4){o-C(6)H(4)(SeMe)(2)}], which have been characterised by IR, Raman and multinuclear NMR ((1)H, (77)Se{(1)H} and (125)Te{(1)H}) spectroscopy, and via X-ray structure determinations of representative examples. Tetrahydrothiophene (tht) can form both 1 : 1 and 1 : 2 Te : L complexes. For X = Br, the former has been shown to be a Br-bridged dimer, [Br(3)(tht)Te(μ-Br)(2)TeBr(3)(tht)], by crystallography with the tht ligands anti, whereas the latter are trans-octahedral monomers. Like its selenoether analogue, MeS(CH(2))(3)SMe forms distorted octahedral cis-chelates, [TeX(4){MeS(CH(2))(3)SMe}], whereas the more rigid o-C(6)H(4)(SMe)(2) unexpectedly forms a zig-zag chain polymer in the solid state, [TeCl(4){o-C(6)H(4)(SMe)(2)}](n), in which the dithioether adopts an extremely unusual bridging mode. This is in contrast to the chelating monomer, cis-[TeCl(4){o-C(6)H(4)(SeMe)(2)}], formed with the analogous selenoether and may be attributed to small differences in the ligand chelate bite angles. The wider bite angle xylyl-linked bidentates, o-C(6)H(4)(CH(2)EMe(2))(2) behave differently; the thioether forms cis-chelated [TeX(4){o-C(6)H(4)(CH(2)SMe)(2)}] confirmed crystallographically, whereas the selenoether undergoes C-Se cleavage and rearrangement on treatment with TeX(4), forming the cyclic selenonium salts, [C(9)H(11)Se](2)[TeX(6)]. The tetrathiamacrocycle, [14]aneS(4) (1,4,8,11-tetrathiacyclotetradecane), does not react cleanly with TeCl(4), but forms the very poorly soluble [TeCl(4)([14]aneS(4))](n), shown by crystallography to be a zig-zag polymer with exo-coordinated [14]aneS(4) units linked via alternate S atoms to a cis-TeCl(4) unit. Trends in the (125)Te{(1)H} NMR shifts for this series of Te(IV) halides chalcogenoether complexes are discussed.

Facile fabrication of large-grain CH 3NH 3PbI 3-xBr x films for high-efficiency solar cells via CH 3NH 3Br-selective Ostwald ripening

DOE PAGES

Yang, Mengjin; Zhang, Taiyang; Schulz, Philip; ...

2016-08-01

Organometallic halide perovskite solar cells (PSCs) have shown great promise as a low-cost, high-efficiency photovoltaic technology. Structural and electro-optical properties of the perovskite absorber layer are most critical to device operation characteristics. Here we present a facile fabrication of high-efficiency PSCs based on compact, large-grain, pinhole-free CH 3NH 3PbI 3-xBr x (MAPbI 3-xBr x) thin films with high reproducibility. A simple methylammonium bromide (MABr) treatment via spin-coating with a proper MABr concentration converts MAPbI 3 thin films with different initial film qualities (for example, grain size and pinholes) to high-quality MAPbI 3-xBr x thin films following an Ostwald ripening process,more » which is strongly affected by MABr concentration and is ineffective when replacing MABr with methylammonium iodide. A higher MABr concentration enhances I-Br anion exchange reaction, yielding poorer device performance. Lastly, this MABr-selective Ostwald ripening process improves cell efficiency but also enhances device stability and thus represents a simple, promising strategy for further improving PSC performance with higher reproducibility and reliability.« less

Microwave Spectrum, Structure, and Nuclear Quadrupole Coupling Constants of 1-Bromo-1-fluoroethane.

PubMed

Tatamitani; Kuwano; Fuchigami; Oe; Ogata

1999-08-01

The microwave spectrum of 1-bromo-1-fluoroethane, CHBrF-CH(3) and CHBrF-CH(2)D ((79/81)Br), has been studied for the first time from 8 to 41 GHz. A least-squares analysis of the observed a- and b-type transition frequencies gave rotational and centrifugal distortion constants and components of the bromine nuclear quadrupole coupling constant tensor in the principal axes system as follows: A = 8979.428(5) MHz, B = 2883.898(3) MHz, C = 2310.535(3) MHz, Delta(J) = 0.74(2) kHz, Delta(JK) = 2.49(3) kHz, Delta(K) = 5.3(5) kHz, delta(J) = 0.146(1) kHz, delta(K) = 2.75(4) kHz, chi(aa) = 493.49(29) MHz, chi(bb) - chi(cc) = -38.89(11) MHz, and ||chi(ab) || = 161.8(28) MHz for the CH(79)BrF-CH(3) species; A = 8979.257(5) MHz, B = 2859.072(3) MHz, C = 2294.572(3), Delta(J) = 0.76(2) kHz, Delta(JK) = 2.51(3) kHz, Delta(K) = 4.5(4) kHz, delta(J) = 0.145(1) kHz, delta(K) = 2.70(4) kHz, chi(aa) = 412.42(27) MHz, chi(bb) - chi(cc) = -32.56 (11) MHz, and ||chi(ab) || = 133.3(3) MHz for the CH(81)BrF-CH(3) species. The structural parameters are calculated from the 24 observed rotational constants, and electronic properties of the carbon-bromine bond in 1-bromo-1-fluoroethane are evaluated from the observed nuclear quadrupole coupling constants. These molecular properties are compared with those of other related molecules. The molecular structure of 1-bromo-1-fluoroethane is found to be very close to that of 1,1-difluoroethane except for the C-Br bond. Copyright 1999 Academic Press.

Microwave Spectrum, Structure, and Nuclear Quadrupole Coupling Constants of 1-Bromo-1-fluoroethane

NASA Astrophysics Data System (ADS)

Tatamitani, Yoshio; Kuwano, Susumu; Fuchigami, Kiyokatu; Oe, Sumio; Ogata, Teruhiko

1999-08-01

The microwave spectrum of 1-bromo-1-fluoroethane, CHBrF-CH3 and CHBrF-CH2D (79/81Br), has been studied for the first time from 8 to 41 GHz. A least-squares analysis of the observed a- and b-type transition frequencies gave rotational and centrifugal distortion constants and components of the bromine nuclear quadrupole coupling constant tensor in the principal axes system as follows: A = 8979.428(5) MHz, B = 2883.898(3) MHz, C = 2310.535(3) MHz, ΔJ = 0.74(2) kHz, ΔJK = 2.49(3) kHz, ΔK = 5.3(5) kHz, δJ = 0.146(1) kHz, δK = 2.75(4) kHz, χaa = 493.49(29) MHz, χbb - χcc = -38.89(11) MHz, and ‖χab‖ = 161.8(28) MHz for the CH79BrF-CH3 species; A = 8979.257(5) MHz, B = 2859.072(3) MHz, C = 2294.572(3), ΔJ = 0.76(2) kHz, ΔJK = 2.51(3) kHz, ΔK = 4.5(4) kHz, δJ = 0.145(1) kHz, δK = 2.70(4) kHz, χaa = 412.42(27) MHz, χbb - χcc = -32.56 (11) MHz, and ‖χab‖ = 133.3(3) MHz for the CH81BrF-CH3 species. The structural parameters are calculated from the 24 observed rotational constants, and electronic properties of the carbon-bromine bond in 1-bromo-1-fluoroethane are evaluated from the observed nuclear quadrupole coupling constants. These molecular properties are compared with those of other related molecules. The molecular structure of 1-bromo-1-fluoroethane is found to be very close to that of 1,1-difluoroethane except for the C-Br bond.

Electron interaction with nitromethane embedded in helium droplets: attachment and ionization measurements.

PubMed

Ferreira da Silva, F; Ptasińska, S; Denifl, S; Gschliesser, D; Postler, J; Matias, C; Märk, T D; Limão-Vieira, P; Scheier, P

2011-11-07

Results of a detailed study on electron interactions with nitromethane (CH(3)NO(2)) embedded in helium nanodroplets are reported. Anionic and cationic products formed are analysed by mass spectrometry. When the doped helium droplets are irradiated with low-energy electrons of about 2 eV kinetic energy, exclusively parent cluster anions (CH(3)NO(2))(n)(-) are formed. At 8.5 eV, three anion cluster series are observed, i.e., (CH(3)NO(2))(n)(-), [(CH(3)NO(2))(n)-H](-), and (CH(3)NO(2))(n)NO(2)(-), the latter being the most abundant. The results obtained for anions are compared with previous electron attachment studies with bare nitromethane and nitromethane condensed on a surface. The cation chemistry (induced by electron ionization of the helium matrix at 70 eV and subsequent charge transfer from He(+) to the dopant cluster) is dominated by production of methylated and protonated nitromethane clusters, (CH(3)NO(2))(n)CH(3)(+) and (CH(3)NO(2))(n)H(+).

Brome isotope selective control of CF3Br molecule clustering by IR laser radiation in gas-dynamic expansion of CF3Br - Ar mixture

NASA Astrophysics Data System (ADS)

Apatin, V. M.; Lokhman, V. N.; Makarov, G. N.; Ogurok, N.-D. D.; Ryabov, E. A.

2018-02-01

We report the results of research on the experimental control of CF3Br molecule clustering under gas-dynamic expansion of the CF3Br - Ar mixture at a nozzle exit by using IR laser radiation. A cw CO2 laser is used for exciting molecules and clusters in the beam and a time-of-flight mass-spectrometer with laser UV ionisation of particles for their detection. The parameters of the gas above the nozzle are determined (compositions and pressure) at which intensive molecule clustering occurs. It is found that in the case of the CF3Br gas without carrier when the pressure P0 above the nozzle does not exceed 4 atm, molecular clusters actually are not generated in the beam. If the gas mixture of CF3Br with argon is used at a pressure ratio 1 : N, where N >= 3, and the total pressure above the nozzle is P0 >= 2 atm, then there occurs molecule clustering. We study the dependences of the efficiency of suppressing the molecule clustering on parameters of the exciting pulse, gas parameters above the nozzle, and on a distance of the molecule irradiation zone from the nozzle exit section. It is shown that in the case of resonant vibrational excitation of gas-dynamically cooled CF3Br molecules at the nozzle exit one can realise isotope-selective suppression of molecule clustering with respect to bromine isotopes. With the CF3Br - Ar mixtures having the pressure ratio 1 : 3 and 1 : 15, the enrichment factors obtained with respect to bromine isotopes are kenr ≈ 1.05 ± 0.005 and kenr ≈ 1.06 ± 0.007, respectively, under jet irradiation by laser emission in the 9R(30) line (1084.635 cm-1). The results obtained let us assume that this method can be used to control clustering of molecules comprising heavy element isotopes, which have a small isotopic shift in IR absorption spectra.

Exploring the Reactivity Trends in the E2 and SN2 Reactions of X(-) + CH3CH2Cl (X = F, Cl, Br, HO, HS, HSe, NH2 PH2, AsH2, CH3, SiH3, and GeH3).

PubMed

Wu, Xiao-Peng; Sun, Xiao-Ming; Wei, Xi-Guang; Ren, Yi; Wong, Ning-Bew; Li, Wai-Kee

2009-06-09

The reactivity order of 12 anions toward ethyl chloride has been investigated by using the G2(+) method, and the competitive E2 and SN2 reactions are discussed and compared. The reactions studied are X(-) + CH3CH2Cl → HX + CH2═CH2 + Cl(-) and X(-) + CH3CH2Cl → CH3CH2X + Cl(-), with X = F, Cl, Br, HO, HS, HSe, NH2 PH2, AsH2, CH3, SiH3, and GeH3. Our results indicate that there is no general and straightforward relationship between the overall barriers and the proton affinity (PA) of X(-); instead, discernible linear correlations only exist for the X's within the same group of the periodic table. Similar correlations are also found with the electronegativity of central atoms in X, deformation energy of the E2 transition state (TS), and the overall enthalpy of reaction. It is revealed that the electronegativity will significantly affect the barrier height, and a more electronegative X will stabilize the E2 and SN2 transition states. Multiple linear regression analysis shows that there is a reasonable linear correlation between E2 (or SN2) overall barriers and the linear combination of PA of X(-) and electronegativity of the central atom.

Brominated VSLSs in and over the East Pacific During the Halocarbon Air-Sea Transect - Pacific Cruise (HalocAST-P)

NASA Astrophysics Data System (ADS)

Liu, Y.; Yvon-Lewis, S. A.; Hu, L.; Smith, R. W.; Shen, L.; Bianchi, T. S.; Campbell, L.

2010-12-01

Brominated very short lived substances (VSLSs), such as bromoform (CHBr3), dibromomethane (CH2Br2), dibromochloromethane (CHClBr2), and dichlorobromomethane (CHBrCl2) can potentially supply a significant amount of inorganic bromine (Bry) to the troposphere and lower stratosphere. Bromine radicals are 50 - 100 times more efficient in depleting ozone (O3) than chlorine radicals; therefore, these compounds are important to the ozone chemistry in the atmosphere. CHBr3, CH2Br2, CHClBr2 and CHBrCl2 are thought to be produced mainly by phytoplankton in the open ocean. During the Halocarbon Air-Sea Transect - Pacific (HalocAST - P) cruise we examined the distributions of halocarbons in the East Pacific Ocean and in the overlying atmosphere. The cruise started from Punta Arenas, Chile on March 29, and finished at Seattle, WA, United States on April 29 2010. Continuous underway measurements of the atmospheric and surface seawater concentrations along with depth profiles of CHBr3, CH2Br2, CHClBr2, CHBrCl2, and a suite of other halogenated compounds were measured over a large cross latitudinal transect. The brominated VSLS measured during this cruise generally exhibit a correlation with chlorophyll a, supporting biogenic production as the predominate source for these compounds in the open ocean. Here, we will be discussing air and seawater concentrations, saturation anomalies, fluxes, and depth profiles for CHBr3, CH2Br2, CHClBr2, and CHBrCl2. Cyanobacteria counts, pigment compositions, nutrient and dissolved organic carbon (DOC) concentrations in the water column were also measured and serve as useful tools for understanding the biological production of these brominated VSLSs.

RISK FACTORS FOR ENDEMIC GASTROINTESTINAL ILLNESS AMONG A WASHINGTON COHORT

EPA Science Inventory

RISK FACTORS FOR ENDEMIC GASTROINTESTINAL ILLNESS AMONG A WASHINGTON COHORT

*Christina A. Peterson 1,2,3 and Rebecca L. Calderon 2

1 Department of Epidemiology
School of Public Health (SPH)
University of North Carolina at Chapel Hill (UNC-CH), 27516
2 Nat...

Dithiolato- and halogenido-bridged nickel-iron complexes related to the active site of [NiFe]-H2ases: preparation, structures, and electrocatalytic H2 production.

PubMed

Song, Li-Cheng; Han, Xiao-Feng; Chen, Wei; Li, Jia-Peng; Wang, Xu-Yong

2017-08-14

A new series of the structural and functional models for the active site of [NiFe]-H 2 ases has been prepared by a simple and convenient synthetic route. Thus, treatment of diphosphines RN(PPh 2 ) 2 (1a, R = p-MeC 6 H 4 CH 2 ; 1b, R = EtO 2 CCH 2 ) with an equimolar NiCl 2 ·6H 2 O, NiBr 2 ·3H 2 O, and NiI 2 in refluxing CH 2 Cl 2 /MeOH or EtOH gave the mononuclear Ni complexes RN(PPh 2 ) 2 NiX 2 (2a, R = p-MeC 6 H 4 CH 2 , X = Cl; 2b, R = EtO 2 CCH 2 , X = Cl; 3a, R = p-MeC 6 H 4 CH 2 , X = Br; 3b, R = EtO 2 CCH 2 , X = Br; 4a, R = p-MeC 6 H 4 CH 2 , X = I; 4b, R = EtO 2 CCH 2 , X = I) in 67-97% yields. Further treatment of complexes 2a,b-4a,b with an equimolar mononuclear Fe complex (dppv)(CO) 2 Fe(pdt) and NaBF 4 resulted in formation of the targeted model complexes [RN(PPh 2 ) 2 Ni(μ-pdt)(μ-X)Fe(CO)(dppv)](BF 4 ) (5a, R = p-MeC 6 H 4 CH 2 , X = Cl; 5b, R = EtO 2 CCH 2 , X = Cl; 6a, R = p-MeC 6 H 4 CH 2 , X = Br; 6b, R = EtO 2 CCH 2 , X = Br; 7a, R = p-MeC 6 H 4 CH 2 , X = I; 7b, R = EtO 2 CCH 2 , X = I) in 60-96% yields. All the new complexes 3a,b-4a,b and 5a,b-7a,b have been characterized by elemental analysis and spectroscopy, and particularly for some of them (3a,b/4a,b and 5b/6b) by X-ray crystallography. More interestingly, the electrochemical and electrocatalytic properties of such halogenido-bridged model complexes are first studied systematically and particularly they have been found to be pre-catalysts for proton reduction to H 2 under CV conditions.

Theoretical study on the identity ion pair SN2 reactions of LiX with CH3SX (X=Cl, Br, and I): structure, mechanism, and potential energy surface.

PubMed

Ren, Yi; Gai, Jing-Gang; Xiong, Yan; Lee, Kuo-Hsing; Chu, San-Yan

2007-07-26

Three archetypal ion pair nucleophilic substitution reactions at the methylsulfenyl sulfur atom LiX+CH3SX-->XSCH3+LiX (X=Cl, Br, and I) are investigated by the modified Gaussian-2 theory. Including lithium cation in the anionic models makes the ion pair reactions proceed along an SN2 mechanism, contrary to the addition-elimination pathway occurring in the corresponding anionic nucleophilic substitution reactions X-+CH3SX-->XSCH3+X-. Two reaction pathways for the ion pair SN2 reactions at sulfur, inversion and retention, are proposed. Results indicate the inversion pathway is favorable for all the halogens. Comparison of the transition structures and energetics for the ion pair SN2 at sulfur with the potential competition ion pair SN2 reactions at carbon LiX+CH3SX-->XCH3+LiXS shows that the SN2 reactions at carbon are not favorable from the viewpoints of kinetics and thermodynamics.

Study on the electronic structure of Al12N12 and Al12P12 fullerene-like nano-clusters upon adsorption of CH3F and CH3Cl

NASA Astrophysics Data System (ADS)

Shokuhi Rad, A.; Zareyee, D.; Pouralijan Foukolaei, V.; Kamyab Moghadas, B.; Peyravi, M.

2016-11-01

We study the interaction of two mono-halomethanes (CH3F and CH3Cl) on Al12N12 and Al12P12 fullerene-like nano-clusters based on density functional theory (DFT). We search on fully optimised adsorbed systems by theoretical investigation considering binding energies, total density of states, natural bond orbital (NBO) charges, and molecular electrostatic potential. We found that the direction of electron transfer is from halomethane to nano-cluster for all systems, indicating p-type semiconductor property of the mentioned nano-clusters. The interaction energy of halomethanes on nano-clusters is evaluated with dispersion corrected (wB97XD) and non-corrected (B3LYP) methods in order to estimate the dispersion effects. The binding energies are found in order of Al12N12-CH3F > Al12N12-CH3Cl > Al12P12-CH3F > Al12P12-CH3Cl with the values of -102.7, -83.7, -64.2, and -48.9 kJ mol-1 based on wB97XD, respectively. We found significant changes in the location of HOMO as well as LUMO of nano-clusters upon adsorption of the above-mentioned molecules. As a result, we suggest the suitability of Al12N12 nano-cluster as a strong adsorbent for practical applications.

Excitations Partition into Two Distinct Populations in Bulk Perovskites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Lili; Brawand, Nicholas P.; Vörös, Márton

2018-01-09

Organolead halide perovskites convert optical excitations to charge carriers with remarkable efficiency in optoelectronic devices. Previous research predominantly documents dynamics in perovskite thin films; however, extensive disorder in this platform may obscure the observed carrier dynamics. Here, carrier dynamics in perovskite single-domain single crystals is examined by performing transient absorption spectroscopy in a transmissive geometry. Two distinct sets of carrier populations that coexist at the same radiation fluence, but display different decay dynamics, are observed: one dominated by second-order recombination and the other by third-order recombination. Based on ab initio simulations, this observation is found to be most consistent withmore » the hypothesis that free carriers and localized carriers coexist due to polaron formation. The calculations suggest that polarons will form in both CH3NH3PbBr3 and CH3NH3PbI3 crystals, but that they are more pronounced in CH3NH3PbBr3. Single-crystal CH3NH3PbBr3 could represent the key to understanding the impact of polarons on the transport properties of perovskite optoelectronic devices.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Lili; Brawand, Nicholas P.; Vörös, Márton

Organolead halide perovskites convert optical excitations to charge carriers with remarkable efficiency in optoelectronic devices. Previous research predominantly documents dynamics in perovskite thin films; however, extensive disorder in this platform may obscure the observed carrier dynamics. Here, carrier dynamics in perovskite single-domain single crystals is examined by performing transient absorption spectroscopy in a transmissive geometry. Two distinct sets of carrier populations that coexist at the same radiation fluence, but display different decay dynamics, are observed: one dominated by second-order recombination and the other by third-order recombination. Based on ab initio simulations, this observation is found to be most consistent withmore » the hypothesis that free carriers and localized carriers coexist due to polaron formation. The calculations suggest that polarons will form in both CH3NH3PbBr3 and CH3NH3PbI3 crystals, but that they are more pronounced in CH3NH3PbBr3. Single-crystal CH3NH3PbBr3 could represent the key to understanding the impact of polarons on the transport properties of perovskite optoelectronic devices.« less

The recombination mechanisms leading to amplified spontaneous emission at the true-green wavelength in CH3NH3PbBr3 perovskites

NASA Astrophysics Data System (ADS)

Priante, D.; Dursun, I.; Alias, M. S.; Shi, D.; Melnikov, V. A.; Ng, T. K.; Mohammed, O. F.; Bakr, O. M.; Ooi, B. S.

2015-02-01

We investigated the mechanisms of radiative recombination in a CH3NH3PbBr3 hybrid perovskite material using low-temperature, power-dependent (77 K), and temperature-dependent photoluminescence (PL) measurements. Two bound-excitonic radiative transitions related to grain size inhomogeneity were identified. Both transitions led to PL spectra broadening as a result of concurrent blue and red shifts of these excitonic peaks. The red-shifted bound-excitonic peak dominated at high PL excitation led to a true-green wavelength of 553 nm for CH3NH3PbBr3 powders that are encapsulated in polydimethylsiloxane. Amplified spontaneous emission was eventually achieved for an excitation threshold energy of approximately 350 μJ/cm2. Our results provide a platform for potential extension towards a true-green light-emitting device for solid-state lighting and display applications.

THE SCATTERING OF K AND Cs BY SEVERAL COMPOUNDS.

DTIC Science & Technology

The nonreactive scattering of K from C10H16, (CH3)3CBr, SiCl4 , Cl2, Br2, I2, ICl, (CN)2C=C(CN)2, and Cs from HBr has been studied in experiments with... SiCl4 , and Cs + HBr and also from the supernumerary rainbows for K + C10H16 and (CH3)3CBr. An optical model analysis on K+(CH3)3CBr and Cs + HBr

CH3 NH3 PbBr3 Perovskite Nanocrystals as Efficient Light-Harvesting Antenna for Fluorescence Resonance Energy Transfer.

PubMed

Muthu, Chinnadurai; Vijayan, Anuja; Nair, Vijayakumar C

2017-05-04

Hybrid perovskites have created enormous research interest as a low-cost material for high-performance photovoltaic devices, light-emitting diodes, photodetectors, memory devices and sensors. Perovskite materials in nanocrystal form that display intense luminescence due to the quantum confinement effect were found to be particularly suitable for most of these applications. However, the potential use of perovskite nanocrystals as a light-harvesting antenna for possible applications in artificial photosynthesis systems is not yet explored. In the present work, we study the light-harvesting antenna properties of luminescent methylammonium lead bromide (CH 3 NH 3 PbBr 3 )-based perovskite nanocrystals using fluorescent dyes (rhodamine B, rhodamine 101, and nile red) as energy acceptors. Our studies revealed that CH 3 NH 3 PbBr 3 nanocrystals are an excellent light-harvesting antenna, and efficient fluorescence resonance energy transfer occurs from the nanocrystals to fluorescent dyes. Further, the energy transfer efficiency is found to be highly dependent on the number of anchoring groups and binding ability of the dyes to the surface of the nanocrystals. These observations may have significant implications for perovskite-based light-harvesting devices and their possible use in artificial photosynthesis systems. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development of an activated carbon-based electrode for the capture and rapid electrolytic reductive debromination of methyl bromide from post-harvest fumigations

USDA-ARS?s Scientific Manuscript database

Due to concerns surrounding its ozone depletion potential, there is a need for technologies to capture and destroy methyl bromide (CH3Br) emissions from post-harvest fumigations applied to control agricultural pests. Previously we described a system in which CH3Br fumes vented from fumigation chambe...

Arrhenius Behavior of Electron Attachment to CH3Br from 303 to 1100 K

DTIC Science & Technology

2013-12-21

Spectrometry journa l homepage: www.e lsev ier .com/ locate / i jms rrhenius behavior of electron attachment to CH3Br from 03 to 1100K homas M. Miller1...Nicholas S. Shuman, Albert A. Viggiano ∗ ir Force Research Laboratory, Space Vehicles Directorate, Kirtland Air Force Base, NM 87117-5776, USA r t i

Detailed modeling of the atmospheric degradation mechanism of very-short lived brominated species

NASA Astrophysics Data System (ADS)

Krysztofiak, G.; Catoire, V.; Poulet, G.; Marécal, V.; Pirre, M.; Louis, F.; Canneaux, S.; Josse, B.

2012-11-01

Detailed chemical reaction schemes for the atmospheric degradations of the very short-lived species (VSLS) bromoform (CHBr3) and dibromomethane (CH2Br2) have been established. These degradation schemes have been implemented in the meteorological/tracer transport model CATT-BRAMS used in the present case as pseudo one-dimensional model with chemistry of CH4, CO, HOx, NOx, NOy and Ox. They include the main possible reactions of the intermediate brominated peroxy radicals RO2 (with R = CH2Br, CHBr2 and CBr3) for which the most likely reaction pathways with HO2 have been found using ab initio computational calculations. The full degradation schemes have been run for two well-defined realistic scenarios, “clean” atmosphere and “moderately” NOy-polluted atmosphere, as representative of a tropical coastal region where these VSLS natural emissions are expected to be important. The Henry's law constants of the brominated organics products have been estimated by using the Bond Contribution Method (BCM; Meylan and Howard, 1991) or the Molecular Connectivity Index (MCI; Nirmalakhandan and Speece, 1988). Using these constants, the least soluble species formed from the VSLS degradation are found to be CBr2O, CHBrO, CBr3O2NO2, CHBr2O2NO2, BrO, BrONO2 and HOBr, which leads those to be potentially transported into the tropical tropopause layer (TTL) in case of deep convection and contribute to stratospheric bromine additionally to the original substances. For bromoform and dibromomethane degradation, the moderate NOy pollution increases the production of the least soluble species and thus approximately doubles the bromine quantity potentially able to reach the TTL (from 22.5% to 43% for CHBr3 and from 8.8% to 20.2% for CH2Br2). The influence of the reactions of the RO2 radicals with HO2, CH3O2 and NO2 on the nature and abundance of the stable intermediate and end-products has been tested for CHBr3 degradation. As a result, the reactions of the RO2 radicals with NO2 have no impact. Taking into account the reaction between RO2 and CH3O2 and modifying the branching ratios of the reaction between RO2 and HO2 lead to a small impact on the bromoform degradation by slightly decreasing (by 10%) the bromine quantity potentially able to reach the TTL. As a final point, in contrast to CHBr3, CH2Br2 degradation produces negligible quantities of organics species and the effects of pollution increase only the inorganic species production. By taking into account the results of these tests, new simplified degradation schemes for CHBr3 and CH2Br2 are proposed.

Tuning the ultrafast photodissociation dynamics of CH3Br on ultrathin MgO films by reducing the layer thickness to the 2D limit

NASA Astrophysics Data System (ADS)

Vaida, Mihai E.; Bernhardt, Thorsten M.

2017-11-01

The femtosecond-laser induced photodissociation of CH3Br adsorbed at sub-monolayer coverage on a solid surface was investigated by time-resolved pump-probe mass spectrometry. To tune the interaction of the CH3Br molecules with the substrate, an Mo(1 0 0) surface was covered with ultrathin insulating MgO layers of variable thickness. By gradually decreasing the magnesia layer thickness to the 2D limit the photodissociation dynamics observed by detection of the methyl fragment indicates an energetic lowering of the relevant methyl bromide excited states due to the increasing spatial proximity of the metallic support. Potential orientational effects of the methyl bromide adsorption geometry are also considered.

Changing concentrations of CO, CH(4), C(5)H(8), CH(3)Br, CH(3)I, and dimethyl sulfide during the Southern Ocean Iron Enrichment Experiments.

PubMed

Wingenter, Oliver W; Haase, Karl B; Strutton, Peter; Friederich, Gernot; Meinardi, Simone; Blake, Donald R; Rowland, F Sherwood

2004-06-08

Oceanic iron (Fe) fertilization experiments have advanced the understanding of how Fe regulates biological productivity and air-sea carbon dioxide (CO(2)) exchange. However, little is known about the production and consumption of halocarbons and other gases as a result of Fe addition. Besides metabolizing inorganic carbon, marine microorganisms produce and consume many other trace gases. Several of these gases, which individually impact global climate, stratospheric ozone concentration, or local photochemistry, have not been previously quantified during an Fe-enrichment experiment. We describe results for selected dissolved trace gases including methane (CH(4)), isoprene (C(5)H(8)), methyl bromide (CH(3)Br), dimethyl sulfide, and oxygen (O(2)), which increased subsequent to Fe fertilization, and the associated decreases in concentrations of carbon monoxide (CO), methyl iodide (CH(3)I), and CO(2) observed during the Southern Ocean Iron Enrichment Experiments.

Tailored Engineering of an Unusual (C4 H9 NH3 )2 (CH3 NH3 )2 Pb3 Br10 Two-Dimensional Multilayered Perovskite Ferroelectric for a High-Performance Photodetector.

PubMed

Li, Lina; Sun, Zhihua; Wang, Peng; Hu, Weida; Wang, Sasa; Ji, Chengmin; Hong, Maochun; Luo, Junhua

2017-09-25

Two-dimensional (2D) layered hybrid perovskites have shown great potential in optoelectronics, owing to their unique physical attributes. However, 2D hybrid perovskite ferroelectrics remain rare. The first hybrid ferroelectric with unusual 2D multilayered perovskite framework, (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 2 Pb 3 Br 10 (1), has been constructed by tailored alloying of the mixed organic cations into 3D prototype of CH 3 NH 3 PbBr 3 . Ferroelectricity is created through molecular reorientation and synergic ordering of organic moieties, which are unprecedented for the known 2D multilayered hybrid perovskites. Single-crystal photodetectors of 1 exhibit fascinating performances, including extremely low dark currents (ca. 10 -12  A), large on/off current ratios (ca. 2.5×10 3 ), and very fast response rate (ca. 150 μs). These merits are superior to integrated detectors of other 2D perovskites, and compete with the most active CH 3 NH 3 PbI 3 . © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Control of Emission Color of High Quantum Yield CH3NH3PbBr3 Perovskite Quantum Dots by Precipitation Temperature.

PubMed

Huang, He; Susha, Andrei S; Kershaw, Stephen V; Hung, Tak Fu; Rogach, Andrey L

2015-09-01

Emission color controlled, high quantum yield CH 3 NH 3 PbBr 3 perovskite quantum dots are obtained by changing the temperature of a bad solvent during synthesis. The products for temperatures between 0 and 60 °C have good spectral purity with narrow emission line widths of 28-36 nm, high absolute emission quantum yields of 74% to 93%, and short radiative lifetimes of 13-27 ns.

Halocarbons as hydrogen bond acceptors: a spectroscopic study of haloethylbenzenes (PhCH2CH2X, X = F, Cl, Br) and their hydrate clusters.

PubMed

Robertson, Patrick A; Villani, Luigi; Dissanayake, Uresha L M; Duncan, Luke F; Abbott, Belinda M; Wilson, David J D; Robertson, Evan G

2018-03-28

The electronic spectra of 2-bromoethylbenzene and its chloro and fluoro analogues have been recorded by resonant two-photon ionisation (R2PI) spectroscopy. Anti and gauche conformers have been assigned by rotational band contour analysis and IR-UV ion depletion spectroscopy in the CH region. Hydrate clusters of the anti conformers have also been observed, allowing the role of halocarbons as hydrogen bond acceptors to be examined in this context. The donor OH stretch of water bound to chlorine is red-shifted by 36 cm -1 , or 39 cm -1 in the case of bromine. Although classed as weak H-bond acceptors, halocarbons are favourable acceptor sites compared to π systems. Fluorine stands out as the weakest H-bond acceptor amongst the halogens. Chlorine and bromine are also weak H-bond acceptors, but allow for more geometric lability, facilitating complimentary secondary interactions within the host molecule. Ab initio and DFT quantum chemical calculations, both harmonic and anharmonic, aid the structural assignments and analysis.

Microsolvation effects on the reactivity of oxy-nucleophiles: the case of gas-phase SN2 reactions of YO-(CH3OH) n=1,2 towards CH3Cl.

PubMed

Yun-Yun, Liu; Fang-Zhou, Qiu; Jun, Zhu; Yi, Ren; Kai-Chung, Lau

2017-06-01

The modified G4(MP2) method was applied to explore microsolvation effects on the reactivity of four solvated normal oxy-nucleophiles YO - (CH 3 OH) n=1,2 (Y = CH 3 , C 2 H 5 , FC 2 H 4 , ClC 2 H 4 ), and five α-oxy-nucleophiles YO - (CH 3 OH) n=1,2 (Y = HO, CH 3 O, F, Cl, Br), in gas-phase S N 2 reactions towards the substrate CH 3 Cl. Based on a Brønsted-type plot, our calculations reveal that the overall activation barriers of five microsolvated α-oxy-nucleophiles are obviously smaller than the prediction from the correlation line constructed by four normal microsolvated ones to different degrees, and clearly demonstrate the existence of an α-effect in the presence of one or two methanol molecule(s). Moreover, it was found that the α-effect of the mono-methanol microsolvated α-nucleophile is stronger than that of the monohydrated α-nucleophile. However, the α-effect of YO - (CH 3 OH) 2 becomes weaker for Y = HO and CH 3 O, whereas it becomes stronger for Y = F, Cl, Br than that of YO - (H 2 O) 2 , which can be explained by analyses of the activation strain model in the two cases. It was also found that the rationale about the low ionization energy of α-nucleophile inducing the α-effect was not widely significant. Graphical abstract Variation of alpha-effect in the gas-phase S N 2 reaction with the microsolvation.

Phenotypic and genotypic characterization of two Toxoplasma gondii isolates in free-range chickens from Uberlândia, Brazil.

PubMed

Lopes, C S; Franco, P S; Silva, N M; Silva, D A O; Ferro, E A V; Pena, H F J; Soares, R M; Gennari, S M; Mineo, J R

2016-07-01

The aim of this study was to determine the seroprevalence of Toxoplasma gondii infection in free-range chickens from Uberlândia, Minas Gerais state, Brazil, and characterize the genotypic and phenotypic features of two isolates of this parasite, considering the importance of these hosts in the epidemiology of toxoplasmosis. Serum samples from 108 free-range chickens were obtained from ten different districts, and submitted to the modified agglutination test (MAT) for the presence of anti-T. gondii antibodies, and brain and heart tissue samples from infected chickens were processed for mouse bioassay. An overall seroprevalence of 71·3% was found and antibody titres ranged from 16 to 4096. After confirmation of seropositivity by mouse bioassay, the determination of the T. gondii genotypes of two isolates was performed by PCR-RFLP, using primers for the following markers: SAG1, SAG2, SAG3, BTUB, GRA6, c22-8, c29-2, L358, PK1, new SAG2, Apico and CS3. These T. gondii isolates, designated TgChBrUD1and TgChBrUD2, were obtained from heart samples of free-range chickens. The TgChBrUD1 isolate belonged to ToxoDB PCR-RFLP genotype 11 and the TgChBrUD2 isolate belonged to ToxoDB PCR-RFLP genotype 6. Both isolates demonstrated high virulence in a rodent model, with the TgChBrUD1 isolate able to induce brain cysts, in accord with its pattern of multiplication rates in human fibroblast culture. Taken together, these results reveal high prevalence of T. gondii infection in free-range chickens throughout Uberlândia, indicating an important degree of oocyst environmental contamination and the existence of considerable risk for T. gondii transmission to humans by consumption of free-range chicken as a food source.

Electronic Structure Approach to Tunable Electronic Properties of Hybrid Organic-Inorganic Perovskites

NASA Astrophysics Data System (ADS)

Liu, Garnett; Huhn, William; Mitzi, David B.; Kanai, Yosuke; Blum, Volker

We present a study of the electronic structure of layered hybrid organic-inorganic perovskite (HOIP) materials using all-electron density-functional theory. Varying the nature of the organic and inorganic layers should enable systematically fine-tuning the carrier properties of each component. Using the HSE06 hybrid density functional including spin-orbit coupling (SOC), we validate the principle of tuning subsystem-specific parts of the electron band structures and densities of states in CH3NH3PbX3 (X=Cl, Br, I) compared to a modified organic component in layered (C6H5C2H4NH3) 2PbX4 (X=Cl, Br, I) and C20H22S4N2PbX4 (X=Cl, Br, I). We show that tunable shifts of electronic levels indeed arise by varying Cl, Br, I as the inorganic components, and CH3NH3+ , C6H5C2H4NH3+ , C20H22S4N22 + as the organic components. SOC is found to play an important role in splitting the conduction bands of the HOIP compounds investigated here. The frontier orbitals of the halide shift, increasing the gap, when Cl is substituted for Br and I.

Electronic spectroscopy and photodissociation dynamics of Co(2+)-methanol clusters: Co2+ (CH3OH)n (n = 4-7).

PubMed

Thompson, Christopher J; Faherty, Kieron P; Stringer, Kay L; Metz, Ricardo B

2005-03-07

Solvated cluster ions Co2+ (CH3OH)n (n = 4-7) have been produced by electrospray and studied using photofragment spectroscopy. There are notable differences between the photodissociation spectra of these complexes and the analogous water complexes. Co2+ (CH3OH)6 absorbs significantly more strongly than Co2+ (H2O)6. The photodissociation spectra of Co2+ (CH3OH)n (n = 4, 5 and 6) are very similar, which suggests that they share the Co2+ (CH3OH)4 chromophore, with additional solvent molecules in the second shell. In contrast, our earlier studies indicate that Co2+ (H2O)6 is six coordinate, and its spectrum is significantly different from that of Co2+ (H2O)4. The larger clusters Co2+ (CH3OH)n (n = 5-7) dissociate by simple loss of one or more solvent molecules. Larger clusters tend to lose more solvent molecules, especially at higher photon energies. As with the corresponding water cluster, Co2+ (CH3OH)4 photodissociates by proton transfer through a salt-bridge intermediate. This is accompanied by a modest kinetic energy release of 170 kJ mol(-1) and occurs with a lifetime of 145 ns.

Organic iodine in Antarctic sea ice: A comparison between winter in the Weddell Sea and summer in the Amundsen Sea

NASA Astrophysics Data System (ADS)

Granfors, Anna; Ahnoff, Martin; Mills, Matthew M.; Abrahamsson, Katarina

2014-12-01

Recent studies have recognized sea ice as a source of reactive iodine to the Antarctic boundary layer. Volatile iodinated compounds (iodocarbons) are released from sea ice, and they have been suggested to contribute to the formation of iodine oxide (IO), which takes part in tropospheric ozone destruction in the polar spring. We measured iodocarbons (CH3I, CH2ClI, CH2BrI, and CH2I2) in sea ice, snow, brine, and air during two expeditions to Antarctica, OSO 10/11 to the Amundsen Sea during austral summer and ANT XXIX/6 to the Weddell Sea in austral winter. These are the first reported measurements of iodocarbons from the Antarctic winter. Iodocarbons were enriched in sea ice in relation to seawater in both summer and winter. During summer, the positive relationship to chlorophyll a biomass indicated a biological origin. We suggest that CH3I is formed biotically in sea ice during both summer and winter. For CH2ClI, CH2BrI, and CH2I2, an additional abiotic source at the snow/ice interface in winter is suggested. Elevated air concentrations of CH3I and CH2ClI during winter indicate that they are enriched in lower troposphere and may take part in the formation of IO at polar sunrise.

Resist Rolymers. 8. Thermolysis of Bromine Containing Acrylate Polymers.

DTIC Science & Technology

1987-06-01

bromine containing polymers is particularly interesting because of their role as proven flame retardants . The bromine ...BrI IC COOH I -co2 (1 CH MeI I Br --- CH 2 ---- The presence of bromine on ester units apparently alters the principal mode of degradation of the...CH2---C C--- I I I I C-O C-O C C=O 0’ OCH2CH2Br 0 0 + ’OCH2CH 2Br (6) As described earlier6 bromoethoxy radical loose bromine atom at

Controlled Homoepitaxial Growth of Hybrid Perovskites.

PubMed

Lei, Yusheng; Chen, Yimu; Gu, Yue; Wang, Chunfeng; Huang, Zhenlong; Qian, Haoliang; Nie, Jiuyuan; Hollett, Geoff; Choi, Woojin; Yu, Yugang; Kim, NamHeon; Wang, Chonghe; Zhang, Tianjiao; Hu, Hongjie; Zhang, Yunxi; Li, Xiaoshi; Li, Yang; Shi, Wanjun; Liu, Zhaowei; Sailor, Michael J; Dong, Lin; Lo, Yu-Hwa; Luo, Jian; Xu, Sheng

2018-05-01

Organic-inorganic hybrid perovskites have demonstrated tremendous potential for the next-generation electronic and optoelectronic devices due to their remarkable carrier dynamics. Current studies are focusing on polycrystals, since controlled growth of device compatible single crystals is extremely challenging. Here, the first chemical epitaxial growth of single crystal CH 3 NH 3 PbBr 3 with controlled locations, morphologies, and orientations, using combined strategies of advanced microfabrication, homoepitaxy, and low temperature solution method is reported. The growth is found to follow a layer-by-layer model. A light emitting diode array, with each CH 3 NH 3 PbBr 3 crystal as a single pixel, with enhanced quantum efficiencies than its polycrystalline counterparts is demonstrated. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis, crystal structure, vibrational spectroscopy, optical properties and theoretical studies of a new organic-inorganic hybrid material: [((CH3)2NH2)(+)]6·[(BiBr6)(3-)]2.

PubMed

Ben Ahmed, A; Feki, H; Abid, Y

2014-12-10

A new organic-inorganic hybrid material, [((CH3)2NH2)(+)]6·[(BiBr6)(3-)]2, has been synthesized and characterized by X-ray diffraction, FT-IR, Raman spectroscopy and UV-Visible absorption. The studied compound crystallizes in the triclinic system, space group P1¯ with the following parameters: a=8.4749(6)(Å), b=17.1392(12)(Å), c=17.1392(12)(Å), α=117.339(0)°, β=99.487(0)°, γ=99.487(0)° and Z=2. The crystal lattice is composed of a two discrete (BiBr6)(3-) anions surrounded by six ((CH3)2NH2)(+) cations. Complex hydrogen bonding interactions between (BiBr6)(3-) and organic cations from a three-dimensional network. Theoretical calculations were performed using density functional theory (DFT) for studying the molecular structure, vibrational spectra and optical properties of the investigated molecule in the ground state. The full geometry optimization of designed system is performed using DFT method at B3LYP/LanL2DZ level of theory using the Gaussian03. The optimized geometrical parameters obtained by DFT calculations are in good agreement with single crystal XRD data. The vibrational spectral data obtained from FT-IR and Raman spectra are assigned based on the results of the theoretical calculations. The energy and oscillator strength calculated by Time-Dependent Density Functional Theory (TD-DFT) results complements with the experimental findings. The simulated spectra satisfactorily coincide with the experimental UV-Visible spectrum. The results show good consistent with the experiment and confirm the contribution of metal orbital to the HOMO-LUMO boundary. Copyright © 2014 Elsevier B.V. All rights reserved.

Role of bromine doping on the photovoltaic properties and microstructures of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Atsushi; Okada, Hiroshi; Oku, Takeo

Organic-inorganic hybrid heterojunction solar cells containing CH{sub 3}NH{sub 3}PbI{sub 3} perovskite compound were fabricated using mesoporous TiO{sub 2} as the electronic transporting layer and spirobifluorence as the hole-transporting layer. The purpose of the present study is to investigate role of bromine (Br) doping on the photovoltaic properties and microstructure of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells. Photovoltaic, optical properties and microstructures of perovskite-based solar cells were investigated. The X-ray diffraction identified crystal structure of the perovskite layer doped with Br in the solar cell. Scanning electron microscopy observation showed a different behavior of surface morphology and the perovskite crystalmore » structure on the TiO{sub 2} mesoporous structure depending on extent amount of hydrogen doping of Br. The role of bromide halogen doping on the perovskite crystal structure and photovoltaic properties was due to improvement of carrier mobility, optimization of electron structure, band gap related with the photovoltaic parameters of V{sub oc}, J{sub sc} and η. Energy diagram and photovoltaic mechanism of the perovskite solar cells varied with halogen doping was discussed by experimental results.« less

On the dissociation and conformation of gas-phase methonium ions.

PubMed

Gross, Deborah S; Williams, Evan R

1996-12-20

The dissociation pathways of both doubly and singly charged methonium ions, (CH(3))(3)N(+) -(CH(2))(n)-(+)N(CH(3))(3)·X(-) (n = 6,10; X = Br, I, and OAc), are measured using blackbody infrared radiative dissociation (BIRD) and SORI-CAD in a Fourier transform mass spectrometer. SORI-CAD of the doubly charged decamethonium ions results primarily in the formation of even electron ions by hydrogen rearrangements. In contrast, homolytic bond cleavage to form two odd electron ions is highly favored in the hexamethonium ion, presumably due to increased Coulomb repulsion in this ion. For BIRD of the singly charged salts, ions are mass selected and dissociated by heating the vacuum chamber to elevated temperatures. Under the low pressure conditions of our experiment, energy is transferred from the chamber walls to the ions by the absorption of blackbody radiation. From the temperature dependence of the unimolecular rate constants for dissociation, Arrhenius activation energies in the zero-pressure limit are obtained. The primary dissociation pathways correspond to counterion substitution reactions which result in loss of N(CH(3))(3) and CH(3)X. For hexamethonium and decamethonium with X = Br or I, the branching ratios for these pathways differ dramatically; the ratio of loss of N(CH(3))(3) and CH(3)Br is 3.8 and 0.4 for hexamethonium and decamethonium bromide, respectively. The hexamethonium acetate salt has a branching ratio of 0.1. The Arrhenius activation energies for hexamethonium (Br or I) and decamethonium (Br or I) are 0.9 and 1.0 eV, respectively. This value for hexamethonium acetate is 0.6 eV. Molecular dynamics simulations and Monte Carlo conformation searching are used to obtain the lowest energy structures of hexamethonium and decamethonium bromide. These calculations indicate that the methonium ion folds around the counterion to form a cyclic salt-bridge structure in which both quaternary nitrogens interact with the oppositely charged counterion. The significantly different branching ratios observed for these ions is attributed to the large change in orientation of the counterion with respect to the ammonium centers as the number of methylene groups in these ions increases. Similar ion conformational differences appear to explain the fragmentation for the OAc counter ion as well.

On the dissociation and conformation of gas-phase methonium ions

PubMed Central

Gross, Deborah S.

2005-01-01

The dissociation pathways of both doubly and singly charged methonium ions, (CH3)3N+ –(CH2)n–+N(CH3)3·X− (n = 6,10; X = Br, I, and OAc), are measured using blackbody infrared radiative dissociation (BIRD) and SORI–CAD in a Fourier transform mass spectrometer. SORI–CAD of the doubly charged decamethonium ions results primarily in the formation of even electron ions by hydrogen rearrangements. In contrast, homolytic bond cleavage to form two odd electron ions is highly favored in the hexamethonium ion, presumably due to increased Coulomb repulsion in this ion. For BIRD of the singly charged salts, ions are mass selected and dissociated by heating the vacuum chamber to elevated temperatures. Under the low pressure conditions of our experiment, energy is transferred from the chamber walls to the ions by the absorption of blackbody radiation. From the temperature dependence of the unimolecular rate constants for dissociation, Arrhenius activation energies in the zero-pressure limit are obtained. The primary dissociation pathways correspond to counterion substitution reactions which result in loss of N(CH3)3 and CH3X. For hexamethonium and decamethonium with X = Br or I, the branching ratios for these pathways differ dramatically; the ratio of loss of N(CH3)3 and CH3Br is 3.8 and 0.4 for hexamethonium and decamethonium bromide, respectively. The hexamethonium acetate salt has a branching ratio of 0.1. The Arrhenius activation energies for hexamethonium (Br or I) and decamethonium (Br or I) are 0.9 and 1.0 eV, respectively. This value for hexamethonium acetate is 0.6 eV. Molecular dynamics simulations and Monte Carlo conformation searching are used to obtain the lowest energy structures of hexamethonium and decamethonium bromide. These calculations indicate that the methonium ion folds around the counterion to form a cyclic salt-bridge structure in which both quaternary nitrogens interact with the oppositely charged counterion. The significantly different branching ratios observed for these ions is attributed to the large change in orientation of the counterion with respect to the ammonium centers as the number of methylene groups in these ions increases. Similar ion conformational differences appear to explain the fragmentation for the OAc counter ion as well. PMID:16479265

The Role of Trap-assisted Recombination in Luminescent Properties of Organometal Halide CH3NH3PbBr3 Perovskite Films and Quantum Dots

NASA Astrophysics Data System (ADS)

Zhang, Zhen-Yu; Wang, Hai-Yu; Zhang, Yan-Xia; Hao, Ya-Wei; Sun, Chun; Zhang, Yu; Gao, Bing-Rong; Chen, Qi-Dai; Sun, Hong-Bo

2016-06-01

Hybrid metal halide perovskites have been paid enormous attentions in photophysics research, whose excellent performances were attributed to their intriguing charge carriers proprieties. However, it still remains far from satisfaction in the comprehensive understanding of perovskite charge-transport properities, especially about trap-assisted recombination process. In this Letter, through time-resolved transient absorption (TA) and photoluminescence (PL) measurements, we provided a relative comprehensive investigation on the charge carriers recombination dynamics of CH3NH3PbBr3 (MAPbBr3) perovskite films and quantum dots (QDs), especially about trap-assisted recombination. It was found that the integral recombination mode of MAPbBr3 films was highly sensitive to the density distribution of generated charge carriers and trap states. Additional, Trap effects would be gradually weakened with elevated carrier densities. Furthermore, the trap-assisted recombination can be removed from MAPbBr3 QDs through its own surface passivation mechanism and this specialty may render the QDs as a new material in illuminating research. This work provides deeper physical insights into the dynamics processes of MAPbBr3 materials and paves a way toward more light-harvesting applications in future.

NMHCs and halocarbons in Asian continental outflow during the Transport and Chemical Evolution over the Pacific (TRACE-P) Field Campaign: Comparison With PEM-West B

NASA Astrophysics Data System (ADS)

Blake, Nicola J.; Blake, Donald R.; Simpson, Isobel J.; Meinardi, Simone; Swanson, Aaron L.; Lopez, Jimena P.; Katzenstein, Aaron S.; Barletta, Barbara; Shirai, Tomoko; Atlas, Elliot; Sachse, Glen; Avery, Melody; Vay, Stephanie; Fuelberg, Henry E.; Kiley, Christopher M.; Kita, Kazuyuki; Rowland, F. Sherwood

2003-10-01

We present an overview of the spatial distributions of nonmethane hydrocarbons (NMHCs) and halocarbons observed over the western north Pacific as part of the NASA GTE Transport and Chemical Evolution over the Pacific (TRACE-P) airborne field campaign (February-April 2001). The TRACE-P data are compared with earlier measurements from the Pacific Rim during the Pacific Exploratory Mission-West B (PEM-West B), which took place in February-March 1994, and with emission inventory data for 2000. Despite the limited spatial and temporal data coverage inherent to airborne sampling, mean levels of the longer-lived NMHCs (including ethane, ethyne, and benzene) were remarkably similar to our results during the PEM-West B campaign. By comparison, mixing ratios of the fire extinguisher Halon-1211 (CF2ClBr) increased by about 50% in the period between 1994 and 2001. Southern China (south of 35°N), and particularly the Shanghai region, appears to have been a substantial source of Halon-1211 during TRACE-P. Our previous analysis of the PEM-West B data employed methyl chloroform (CH3CCl3) as a useful industrial tracer. However, regulations have reduced its emissions to the extent that its mixing ratio during TRACE-P was only one-third of that measured in 1994. Methyl chloroform mixing ratio "hot spots," indicating regions downwind of continuing emissions, included outflow from the vicinity of Shanghai, China, but particularly high emission ratios relative to CO were observed close to Japan and Korea. Tetrachloroethene (C2Cl4) levels have also decreased significantly, especially north of 25°N, but this gas still remains a useful indicator of northern industrial emissions. Methyl bromide (CH3Br) levels were systematically 1-2 pptv lower from 1994 to 2001, in accord with recent reports. However, air masses that had been advected over Japan and/or South Korean port cities typically exhibited elevated levels of CH3Br. As a consequence, emissions of CH3Br from Japan and Korea calculated employing CH3Br/CO ratios and scaled to CO emission inventory estimates, were almost as large as for all of south China (south of 35°N). Total east Asian emissions of CH3Br and CH3Cl were estimated to be roughly 4.7 Gg/yr and 167 Gg/yr, respectively, in 2001.

Experimental and computational study of the bonding properties of mixed bis-ylides of phosphorus and sulfur.

PubMed

Serrano, Elena; Navarro, Rafael; Soler, Tatiana; Carbó, Jorge J; Lledós, Agustí; Urriolabeitia, Esteban P

2009-07-20

The reactivity of the known ylide-sulfonium salt [Ph(3)P=CHC(O)CH(2)SMe(2)]Br 1 and the new ylide-sulfide [Ph(3)P=CHC-(O)CH(2)SMe] 2 toward Pd(II) complexes has been studied. Compound 1 reacts with PdCl(2)(NCMe)(2) and NEt(3) to give cis-[PdCl(2)[Ph(3)PCHC(O)CHSMe(2)-kappa-C,C

Room temperature synthesis of ultra-small, near-unity single-sized lead halide perovskite quantum dots with wide color emission tunability, high color purity and high brightness.

PubMed

Peng, Lucheng; Geng, Jing; Ai, Lisha; Zhang, Ying; Xie, Renguo; Yang, Wensheng

2016-08-19

Phosphor with extremely narrow emission line widths, high brightness, and wide color emission tunability in visible regions is required for display and lighting applications, yet none has been reported in the literature so far. In the present study, single-sized lead halide perovskite (APbX 3; A = CH3NH3 and Cs; X = Cl, Br, and I) nanocrystalline (NC) phosphors were achieved for the first time in a one-pot reaction at room temperature (25 °C). The size-dependent samples, which included four families of CsPbBr3 NCs and exhibited sharp excitonic absorption peaks and pure band gap emission, were directly obtained by simply varying the concentration of ligands. The continuity of the optical spectrum can be successively tuned over the entire UV-visible spectral region (360-610 nm) by preparing CsPbCl3, CsPbI3, and CsPb(Y/Br)3 (Y = Cl and I) NCs with the use of CsPbBr3 NCs as templates by anion exchange while maintaining the size of NCs and high quantum yields of up to 80%. Notably, an emission line width of 10-24 nm, which is completely consistent with that of their single particles, indicates the formation of single-sized NCs. The versatility of the synthetic strategy was validated by extending it to the synthesis of single-sized CH3NH3PbX 3 NCs by simply replacing the cesium precursor by the CH3NH3 X precursor.

π-Stacking, C-H/π, and halogen bonding interactions in bromobenzene and mixed bromobenzene-benzene clusters.

PubMed

Reid, Scott A; Nyambo, Silver; Muzangwa, Lloyd; Uhler, Brandon

2013-12-19

Noncovalent interactions play an important role in many chemical and biochemical processes. Building upon our recent study of the homoclusters of chlorobenzene, where π-π stacking and CH/π interactions were identified as the most important binding motifs, in this work we present a study of bromobenzene (PhBr) and mixed bromobenzene-benzene clusters. Electronic spectra in the region of the PhBr monomer S0-S1 (ππ*) transition were obtained using resonant two-photon ionization (R2PI) methods combined with time-of-flight mass analysis. As previously found for related systems, the PhBr cluster spectra show a broad feature whose center is red-shifted from the monomer absorption, and electronic structure calculations indicate the presence of multiple isomers and Franck-Condon activity in low-frequency intermolecular modes. Calculations at the M06-2X/aug-cc-pVDZ level find in total eight minimum energy structures for the PhBr dimer: four π-stacked structures differing in the relative orientation of the Br atoms (denoted D1-D4), one T-shaped structure (D5), and three halogen bonded structures (D6-D8). The calculated binding energies of these complexes, corrected for basis set superposition error (BSSE) and zero-point energy (ZPE), are in the range of -6 to -24 kJ/mol. Time-dependent density functional theory (TDDFT) calculations predict that these isomers absorb over a range that is roughly consistent with the breadth of the experimental spectrum. To examine the influence of dipole-dipole interaction, R2PI spectra were also obtained for the mixed PhBr···benzene dimer, where the spectral congestion is reduced and clear vibrational structure is observed. This structure is well-simulated by Franck-Condon calculations that incorporate the lowest frequency intermolecular modes. Calculations find four minimum energy structures for the mixed dimer and predict that the binding energy of the global minimum is reduced by ~30% relative to the global minimum PhBr dimer structure.

Oxidation mechanisms of CF2Br2 and CH2Br2 induced by air nonthermal plasma.

PubMed

Schiorlin, Milko; Marotta, Ester; Dal Molin, Marta; Paradisi, Cristina

2013-01-02

Oxidation mechanisms in air nonthermal plasma (NTP) at room temperature and atmospheric pressure were investigated in a corona reactor energized by +dc, -dc, or +pulsed high voltage.. The two bromomethanes CF(2)Br(2) and CH(2)Br(2) were chosen as model organic pollutants because of their very different reactivities with OH radicals. Thus, they served as useful mechanistic probes: they respond differently to the presence of humidity in the air and give different products. By FT-IR analysis of the postdischarge gas the following products were detected and quantified: CO(2) and CO in the case of CH(2)Br(2), CO(2) and F(2)C ═ O in the case of CF(2)Br(2). F(2)C ═ O is a long-lived oxidation intermediate due to its low reactivity with atmospheric radicals. It is however removed from the NTP processed gas by passage through a water scrubber resulting in hydrolysis to CO(2) and HF. Other noncarbon containing products of the discharge were also monitored by FT-IR analysis, including HNO(3) and N(2)O. Ozone, an important product of air NTP, was never detected in experiments with CF(2)Br(2) and CH(2)Br(2) because of the highly efficient ozone depleting cycles catalyzed by BrOx species formed from the bromomethanes. It is concluded that, regardless of the type of corona applied, CF(2)Br(2) reacts in air NTP via a common intermediate, the CF(2)Br radical. The possible reactions leading to this radical are discussed, including, for -dc activation, charge exchange with O(2)(-), a species detected by APCI mass spectrometry.

The Luminescence of CH3 NH3 PbBr3 Perovskite Nanoparticles Crests the Summit and Their Photostability under Wet Conditions is Enhanced.

PubMed

Gonzalez-Carrero, Soranyel; Francés-Soriano, Laura; González-Béjar, María; Agouram, Saïd; Galian, Raquel E; Pérez-Prieto, Julia

2016-10-01

CH 3 NH 3 PbBr 3 perovskite nanoparticles (P AD ) are prepared with a photoluminescence quantum yield of ≈100% in air atmosphere by using the quasi-spherical shaped 2-adamantylammonium bromide (ADBr) as the only capping ligand. The photostability under wet conditions of this kind of nanoparticles is enhanced by using cucurbit[7]uril-adamantylammonium (AD@CB) host-guest complexes as the capping ligand. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

EVALUATION OF CHROMOMYCIN A3 ASSAY IN HUMAN SPERM AFTER SIMULATED OVERNIGHT SHIPMENT

EPA Science Inventory

EVALUATION OF CHROMOMYCIN A3ASSAY IN HUMAN SPERM AFTER SIMULATED OVERNIGHT SHIPMENT.
SC Jeffay1, R Morris Buus1, LF Strader1, AF Olshan2, DP Evenson3, SD Perreault1. 1US EPA/ORD, RTP, NC;2UNC-CH, Chapel Hill, NC;3SDSU, Brookings, SD.

Semen collection kits that allow ...

Emulsion Synthesis of Size-Tunable CH3NH3PbBr3 Quantum Dots: An Alternative Route toward Efficient Light-Emitting Diodes.

PubMed

Huang, Hailong; Zhao, Fangchao; Liu, Lige; Zhang, Feng; Wu, Xian-gang; Shi, Lijie; Zou, Bingsuo; Pei, Qibing; Zhong, Haizheng

2015-12-30

We report a facile nonaqueous emulsion synthesis of colloidal halide perovskite quantum dots by controlled addition of a demulsifier into an emulsion of precursors. The size of resulting CH3NH3PbBr3 quantum dots can be tuned from 2 to 8 nm by varying the amount of demulsifier. Moreover, this emulsion synthesis also allows the purification of these quantum dots by precipitation from the colloidal solution and obtains solid-state powder which can be redissolved for thin film coating and device fabrication. The photoluminescence quantum yields of the quantum dots is generally in the range of 80-92%, and can be well-preserved after purification (∼80%). Green light-emitting diodes fabricated comprising a spin-cast layer of the colloidal CH3NH3PbBr3 quantum dots exhibited maximum current efficiency of 4.5 cd/A, power efficiency of 3.5 lm/W, and external quantum efficiency of 1.1%. This provides an alternative route toward high efficient solution-processed perovskite-based light-emitting diodes. In addition, the emulsion synthesis is versatile and can be extended for the fabrication of inorganic halide perovskite colloidal CsPbBr3 nanocrystals.

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid.

PubMed

Chambreau, Steven D; Boatz, Jerry A; Vaghjiani, Ghanshyam L; Koh, Christine; Kostko, Oleg; Golan, Amir; Leone, Stephen R

2012-06-21

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(‡)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(‡)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f, gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f, liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f, gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f, liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.

Short-length and high-density TiO{sub 2} nanorod arrays for the efficient charge separation interface in perovskite solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiao, Guannan; Shi, Chengwu, E-mail: shicw506@foxmail.com; Zhang, Zhengguo

The TiO{sub 2} nanorod arrays with the length of 70 nm, the diameter of 20 nm, and the areal density of 1000 µm{sup −2} were firstly prepared by the hydrothermal method using the aqueous grown solution of 38 mM titanium isopropoxide and 6 M hydrochloric acid at 170 °C for 60 min. Over-500 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layers were successfully obtained by sequential deposition routes using 1.7 M PbI{sub 2}·DMSO complex precursor solution and 0.465 M isopropanol solution of the methylammonium halide mixture with the molar ratio of CH{sub 3}NH{sub 3}I/CH{sub 3}NH{sub 3}Br=85/15. The perovskite solar cellsmore » based on the TiO{sub 2} nanorod array and 560 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layer exhibited the best photoelectric conversion efficiency (PCE) of 15.93%, while the corresponding planar perovskite solar cells without the TiO{sub 2} nanorod array and with 530 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layer gave the best PCE of 12.82% at the relative humidity of 50–54%. - Graphical abstract: The TiO{sub 2} nanorod arrays with the length of 70 nm, the diameter of 20 nm, and the areal density of 1000 µm{sup −2} were prepared by the hydrothermal method using the aqueous grown solution of 38 mM titanium isopropoxide and 6 M hydrochloric acid at 170 °C for 60 min. The optimal annealing temperature of TiO{sub 2} nanorod arrays was 450 °C. The perovskite solar cells based on the TiO{sub 2} nanorod array and 560 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layer exhibited the best photoelectric conversion efficiency (PCE) of 15.93% and the average PCE of 13.41±2.52%, while the corresponding planar perovskite solar cells without the TiO{sub 2} nanorod array and with 530 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layer gave the best PCE of 12.82% and the average PCE of 10.54±2.28% at the relative humidity of 50–54%. - Highlights: • Preparation of TiO{sub 2} nanorod array with length of 70 nm and density of 1000 µm{sup −2}. • Influence of annealing temperatures on the -OH content of TiO{sub 2} nanorod arrays. • Preparation of over-500 nm-thickness CH{sub 3}NH{sub 3}PbI{sub 3−x}Br{sub x} absorber layer. • Combination of short-length TiO{sub 2} nanorod array and high-thickness perovskite layer. • The best and average PCE with TiO{sub 2} array of 15.93% and 13.41±2.52% at 50–54% RH.« less

High-performance planar green light-emitting diodes based on a PEDOT:PSS/CH3NH3PbBr3/ZnO sandwich structure

NASA Astrophysics Data System (ADS)

Shi, Zhi-Feng; Sun, Xu-Guang; Wu, Di; Xu, Ting-Ting; Zhuang, Shi-Wei; Tian, Yong-Tao; Li, Xin-Jian; Du, Guo-Tong

2016-05-01

Recently, perovskite-based light-emitting diodes based on organometal halide emitters have attracted much attention because of their excellent properties of high color purity, tunable emission wavelength and a low-temperature processing technique. As is well-known, organic light-emitting diodes have shown powerful capabilities in this field; however, the fabrication of these devices typically relies on high-temperature and high-vacuum processes, which increases the final cost of the product and renders them uneconomical for use in large-area displays. Organic/inorganic hybrid halide perovskites match with these material requirements, as it is possible to prepare such materials with high crystallinity through solution processing at low temperature. Herein, we demonstrated a high-brightness green light-emitting diode based on PEDOT:PSS/CH3NH3PbBr3/ZnO sandwich structures by a spin-coating method combined with a sputtering system. Under forward bias, a dominant emission peak at ~530 nm with a low full width of half-maximum (FWHM) of 30 nm can be achieved at room temperature. Owing to the high surface coverage of the CH3NH3PbBr3 layer and a device design based on carrier injection and a confinement configuration, the proposed diode exhibits good electroluminescence performance, with an external quantum efficiency of 0.0645%. More importantly, we investigated the working stability of the studied diode under continuous operation to verify the sensitivity of the electroluminescence performance to ambient atmosphere and to assess the suitability of the diode for practical applications. Moreover, the underlying reasons for the undesirable emission decay are tentatively discussed. This demonstration of an effective green electroluminescence based on CH3NH3PbBr3 provides valuable information for the design and development of perovskites as efficient emitters, thus facilitating their use in existing applications and suggesting new potential applications.

Atmospheric histories of halocarbons from analysis of Antarctic firn air: Methyl bromide, methyl chloride, chloroform, and dichloromethane

NASA Astrophysics Data System (ADS)

Trudinger, C. M.; Etheridge, D. M.; Sturrock, G. A.; Fraser, P. J.; Krummel, P. B.; McCulloch, A.

2004-11-01

We reconstruct atmospheric levels of methyl bromide (CH3Br), methyl chloride (CH3Cl), chloroform (CHCl3), and dichloromethane (CH2Cl2) back to before 1940 using measurements of air extracted from firn on Law Dome in Antarctica. The firn air at this site has a relatively narrow age spread, giving high time resolution reconstructions. The CH3Br reconstructions confirm previously measured firn records but with more temporal structure. Our CH3Cl reconstruction is slightly different from previous reconstructions, raising some questions about CH3Cl in the firn. Our reconstructions for CHCl3 and CH2Cl2 are the first published records of concentration prior to direct atmospheric measurements. A two-box atmospheric model is used to investigate the budgets of these gases. Much of the variation in CH3Cl can be explained by biomass burning emissions that increase up to 1980 and then are relatively stable apart from some high burning years such as 1997-1998. The CHCl3 firn reconstruction suggests that the anthropogenic source for CHCl3 is greater than previously thought, with human influence on the soil source a possible important contributor here. The CH2Cl2 firn reconstruction is consistent with industrial emission estimates based on audited sales data but suggests that the ocean source of CH2Cl2 is less than previously estimated.

Ge14 Br8 (PEt3 )4 : A Subhalide Cluster of Germanium.

PubMed

Kunz, Tanja; Schrenk, Claudio; Schnepf, Andreas

2018-04-03

Heating a metastable solution of Ge I Br to room temperature led to the first structurally characterized metalloid subhalide cluster Ge 14 Br 8 (PEt 3 ) 4 (1). Furthermore 1 can be seen as the first isolated binary halide cluster on the way from Ge I Br to elemental germanium, giving insight into the complex reaction mechanism of its disproportionation reaction. Quantum chemical calculations further indicate that a classical bonding situation is realized within 1 and that the last step of the formation of 1 might include the trapping of GeBr 2 units. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Phasing-out of methyl bromide (CH3Br) and usage of sulfuryl fluoride (SO2F2) for pest control in Europe

NASA Astrophysics Data System (ADS)

Reimann, S.; Brunner, D.; Vollmer, M. K.; Henne, S.; Maione, M.; Arduini, I.

2011-12-01

Methyl bromide (CH3Br) has been widely used for fumigation in agriculture, in food mills and for transport applications. Due to its high ozone-depleting potential, its use has been banned within the Montreal Protocol and its amendments, except for quarantine/pre-shipment uses. This led to a decline of global atmospheric background concentrations and of world-wide emissions. In Europe, emissions have declined concurrently and a generally good compliance with legislation is suggested based on emission estimates using inverse modelling of continuous measurements from the European high-altitude sites Jungfraujoch (Switzerland) and Monte Cimone (Italy). However, episodic pollution events of CH3Br show a violation of international legislation, as this substance has been banned in Europe from 2007 onwards in agriculture and from 2010 in quarantine/pre-shipment uses. Sulfuryl fluoride (SO2F2) is one of the replacement compounds for CH3Br in food processing structures. SO2F2 does not affect the ozone layer but is a potent greenhouse gas (100-year GWP: 4740) with a lifetime of 36 years. European emissions of SO2F2 are estimated by using measurements at Jungfraujoch. Large pollution events are very sporadic but consistently linked to emissions during long weekends and public holidays, presumably a preferable time to fumi-gate food processing structures.

Orientational Glass Formation in Substituted Hybrid Perovskites

DOE PAGES

Mozur, Eve M.; Maughan, Annalise E.; Cheng, Yongqiang; ...

2017-11-07

Hybrid organic-inorganic perovskites have gained notoriety in the photovoltaic community for their composition-tunable band gaps and long-lived electronic excited states, which are known to be related to the crystalline phase. While indirect evidence suggests that coupling between polar organic cations affects the phase behavior, it remains unclear how the coupling manifests in hybrid perovskites such as methylammonium lead halides (CH 3NH 3PbX 3). Here, we present crystallographic and spectroscopic data for the series (CH 3NH 3) 1-xCs xPbBr 3. CH 3NH 3PbBr 3 behaves as a plastic crystal in the high temperature cubic phase, and substitution of CH 3NH 3more » + with Cs + leads to the formation of an orientational glass. While the organic molecule exhibits slow, glassy reorientational dynamics, the inorganic framework continues to undergo crystallographic phase transitions. These crystallographic transitions occur in the absence of thermodynamic signatures in the specific heat, which suggests that the phase transitions result from underlying instabilities intrinsic to the inorganic lattice. However, these transitions are not decoupled from the reorientations of the organic molecule, as indicated by inelastic and quasielastic neutron scattering. Observation of a reentrant phase transition in (CH 3NH 3) 0.8Cs 0.2PbBr 3 permits the resolution of these complex behaviors within the context of strain mediated interactions. Lastly, together, these results provide critical insight into the coupled phase behavior and dynamics in hybrid perovskites.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mozur, Eve M.; Maughan, Annalise E.; Cheng, Yongqiang

Hybrid organic-inorganic perovskites have gained notoriety in the photovoltaic community for their composition-tunable band gaps and long-lived electronic excited states, which are known to be related to the crystalline phase. While indirect evidence suggests that coupling between polar organic cations affects the phase behavior, it remains unclear how the coupling manifests in hybrid perovskites such as methylammonium lead halides (CH 3NH 3PbX 3). Here, we present crystallographic and spectroscopic data for the series (CH 3NH 3) 1-xCs xPbBr 3. CH 3NH 3PbBr 3 behaves as a plastic crystal in the high temperature cubic phase, and substitution of CH 3NH 3more » + with Cs + leads to the formation of an orientational glass. While the organic molecule exhibits slow, glassy reorientational dynamics, the inorganic framework continues to undergo crystallographic phase transitions. These crystallographic transitions occur in the absence of thermodynamic signatures in the specific heat, which suggests that the phase transitions result from underlying instabilities intrinsic to the inorganic lattice. However, these transitions are not decoupled from the reorientations of the organic molecule, as indicated by inelastic and quasielastic neutron scattering. Observation of a reentrant phase transition in (CH 3NH 3) 0.8Cs 0.2PbBr 3 permits the resolution of these complex behaviors within the context of strain mediated interactions. Lastly, together, these results provide critical insight into the coupled phase behavior and dynamics in hybrid perovskites.« less

Unraveling the Role of Monovalent Halides in Mixed-Halide Organic-Inorganic Perovskites.

PubMed

Deepa, Melepurath; Ramos, F Javier; Shivaprasad, S M; Ahmad, Shahzada

2016-03-16

The performance of perovskite solar cells is strongly influenced by the composition and microstructure of the perovskite. A recent approach to improve the power conversion efficiencies utilized mixed-halide perovskites, but the halide ions and their roles were not directly studied. Unraveling their precise location in the perovskite layer is of paramount importance. Here, we investigated four different perovskites by using X-ray photoelectron spectroscopy, and found that among the three studied mixed-halide perovskites, CH3 NH3 Pb(I0.74 Br0.26 )3 and CH3 NH3 PbBr3-x Clx show peaks that unambiguously demonstrate the presence of iodide and bromide in the former, and bromide and chloride in the latter. The CH3 NH3 PbI3-x Clx perovskite shows anomalous behavior, the iodide content far outweighs that of the chloride; a small proportion of chloride, in all likelihood, resides deep within the TiO2 /absorber layer. Our study reveals that there are many distinguishable structural differences between these perovskites, and that these directly impact the photovoltaic performances. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Photodissociation of nitromethane cluster anions.

PubMed

Goebbert, Daniel J; Khuseynov, Dmitry; Sanov, Andrei

2010-08-28

Three types of anionic fragments are observed in the photodissociation of nitromethane cluster anions, (CH(3)NO(2))(n)(-), n=1-6, at 355 nm: NO(2)(-)(CH(3)NO(2))(k), (CH(3)NO(2))(k)(-), and OH(-) (k

Thioether coordination to divalent selenium halide acceptors--synthesis, properties and structures.

PubMed

Jolleys, Andrew; Levason, William; Reid, Gillian

2013-02-28

The tetravalent SeCl(4) and SeBr(4) are reduced in the presence of thioether ligands L (SMe(2), tht) or L-L (MeS(CH(2))(n)SMe (n = 2 or 3), o-C(6)H(4)(SMe)(2)) in MeCN solution at 0 °C, forming Se(II) thioether complexes, including the crystallographically characterised halo-bridged chain polymers [SeX(2)(SMe(2))] (X = Cl or Br), molecular trans-[SeX(2)(tht)(2)], cis-[SeBr(2){MeS(CH(2))(2)SMe}] and the thioether-bridged polymer [SeBr(2){MeS(CH(2))(3)SMe}], as the main products, together with halogenated ligand. The [SeX(2)(L)(2)] and [SeX(2)(L-L)] complexes are all based upon distorted square planar coordination, with two Se-based lone pairs assumed to occupy the (vacant) axial sites, and Se-S bond distances of ca. 2.4-2.6 Å. The 1:1 species [SeX(2)(SMe(2))] are T-shaped with trans X groups and weak intermolecular SeX contacts. The SeCl(2)-thioether complexes are less stable than the bromides, both in solution in CH(2)Cl(2) and as solids at ambient temperature. Reaction of SeBr(4) with o-C(6)H(4)(SMe(2))(2) leads to the red complex cis-[SeBr(2){κ(1)-o-C(6)H(4)(SMe)(2)}(2)] as the major product; together with a minor (yellow) product formed via bromination of the aromatic ring, [SeBr(2){4-Br-1,2-(SMe)(2)-C(6)H(3)}(2)]. The crystal structure confirms a V-shaped SeBr(2) unit with long (weak) κ(1)-interactions to one S donor (meta to the Br) from two brominated ligands--an extremely rare coordination mode for an o-phenylene dithioether. Similar reaction of o-C(6)H(4)(SMe(2))(2) with SeCl(4) leads to several species, including monosulfonium cation, [1](+) formed by coupling of one thioether group to the C4-position of the phenylene backbone in an adjacent molecule, confirmed crystallographically. Carbon-sulfur coupling is also evident in the reaction of SeX(4) with o-C(6)H(4)(CH(2)SMe)(2), leading to two related cyclic sulfonium species, [2](+) and [3](+), which were structurally characterised as [SeBr(4)](2-) and [Se(2)Cl(6)](2-) salts respectively. Reaction of SeX(4) with SeMe(2) leads to halogenation of the ligand to form Me(2)SeX(2) and reduction of the SeX(4) to elemental selenium.

Geometrical flexibility of platinum nanoclusters: impacts on catalytic decomposition of ethylene glycol.

PubMed

Mahmoodinia, Mehdi; Trinh, Thuat T; Åstrand, Per-Olof; Tran, Khanh-Quang

2017-11-01

Catalytic decomposition of ethylene glycol on the Pt 13 cluster was studied as a model system for hydrogen production from a lignocellulosic material. Ethylene glycol was chosen as a starting material because of two reasons, it is the smallest oxygenate with a 1 : 1 carbon to oxygen ratio and it contains the C-H, O-H, C-C, and C-O bonds also present in biomass. Density functional theory calculations were employed for predictions of reaction pathways for C-H, O-H, C-C and C-O cleavages, and Brønsted-Evans-Polanyi relationships were established between the final state and the transition state for all mechanisms. The results show that Pt 13 catalyzes the cleavage reactions of ethylene glycol more favourably than a Pt surface. The flexibility of Pt 13 clusters during the reactions is the key factor in reducing the activation barrier. Overall, the results demonstrate that ethylene glycol and thus biomass can be efficiently converted into hydrogen using platinum nanoclusters as catalysts.

Chemistry within Molecular van der Waals Clusters

DTIC Science & Technology

1990-07-18

and Discussion 1) Stabilizing an Unstable Reagent within a Cluster a) 1, 1- Difluoroethane Clusters 2) Providing New Chemical Pathways a) Ammonia...1- difluoroethane clusters 24, the generation of (CH3 OCH 3 )nH3 O+ & (CH3 OCH 3 )nCH3 OH2 + ions from dimethyl ether dusters25 ,26, the generation of...Stabilizing an Unstable Reagent within a Cluster a) 1.1- Difluoroethane Clusters 24 The dominant reactive process which occurs within the majority of cluster

Dynamical Bifurcation in Gas-Phase XH- + CH3 Y SN 2 Reactions: The Role of Energy Flow and Redistribution in Avoiding the Minimum Energy Path.

PubMed

Proenza, Yaicel G; de Souza, Miguel A F; Longo, Ricardo L

2016-11-02

The gas-phase reactions of XH - (X=O, S) + CH 3 Y (Y=F, Cl, Br) span nearly the whole range of S N 2 pathways, and show an intrinsic reaction coordinate (IRC) (minimum energy path) with a deep well owing to the CH 3 XH⋅⋅⋅Y - (or CH 3 S - ⋅⋅⋅HF) hydrogen-bonded postreaction complex. MP2 quasiclassical-type direct dynamics starting at the [HX⋅⋅⋅CH 3 ⋅⋅⋅Y] - transition-state (TS) structure reveal distinct mechanistic behaviors. Trajectories that yield the separated CH 3 XH+Y - (or CH 3 S - +HF) products directly are non-IRC, whereas those that sample the CH 3 XH⋅⋅⋅Y - (or CH 3 S - ⋅⋅⋅HF) complex are IRC. The IRCIRC/non-IRC ratios of 90:10, 40:60, 25:75, 2:98, 0:100, and 0:100 are obtained for (X, Y)=(S, F), (O, F), (S, Cl), (S, Br), (O, Cl), and (O, Br), respectively. The properties of the energy profiles after the TS cannot provide a rationalization of these results. Analysis of the energy flow in dynamics shows that the trajectories cross a dynamical bifurcation, and that the inability to follow the minimum energy path arises from long vibration periods of the X-C⋅⋅⋅Y bending mode. The partition of the available energy to the products into vibrational, rotational, and translational energies reveals that if the vibrational contribution is more than 80 %, non-IRC behavior dominates, unless the relative fraction of the rotational and translational components is similar, in which case a richer dynamical mechanism is shown, with an IRC/non-IRC ratio that correlates to this relative fraction. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Revealing the Chemistry between Band Gap and Binding Energy for Lead-/Tin-Based Trihalide Perovskite Solar Cell Semiconductors.

PubMed

Varadwaj, Arpita; Varadwaj, Pradeep R; Yamashita, Koichi

2018-01-23

A relationship between reported experimental band gaps (solid) and DFT-calculated binding energies (gas) is established, for the first time, for each of the four ten-membered lead (or tin) trihalide perovskite solar cell semiconductor series examined in this study, including CH 3 NH 3 PbY 3 , CsPbY 3 , CH 3 NH 3 SnY 3 and CsSnY 3 (Y=I (3-x) Br x=1-3 , I (3-x) Cl x=1-3 , Br (3-x) Cl x=1-3 , and IBrCl). The relationship unequivocally provides a new dimension for the fundamental understanding of the optoelectronic features of solid-state solar cell thin films by using the 0 K gas-phase energetics of the corresponding molecular building blocks. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Polar-solvent-free colloidal synthesis of highly luminescent alkylammonium lead halide perovskite nanocrystals

NASA Astrophysics Data System (ADS)

Vybornyi, Oleh; Yakunin, Sergii; Kovalenko, Maksym V.

2016-03-01

A novel synthesis of hybrid organic-inorganic lead halide perovskite nanocrystals (CH3NH3PbX3, X = Br or I) that does not involve the use of dimethylformamide or other polar solvents is presented. The reaction between methylamine and PbX2 salts is conducted in a high-boiling nonpolar solvent (1-octadecene) in the presence of oleylamine and oleic acid as coordinating ligands. The resulting nanocrystals are characterized by high photoluminescence quantum efficiencies of 15-50%, outstanding phase purity and tunable shapes (nanocubes, nanowires, and nanoplatelets). Nanoplatelets spontaneously assemble into micrometer-length wires by face-to-face stacking. In addition, we demonstrate amplified spontaneous emission from thin films of green-emitting CH3NH3PbBr3 nanowires with low pumping thresholds of 3 μJ cm-2.A novel synthesis of hybrid organic-inorganic lead halide perovskite nanocrystals (CH3NH3PbX3, X = Br or I) that does not involve the use of dimethylformamide or other polar solvents is presented. The reaction between methylamine and PbX2 salts is conducted in a high-boiling nonpolar solvent (1-octadecene) in the presence of oleylamine and oleic acid as coordinating ligands. The resulting nanocrystals are characterized by high photoluminescence quantum efficiencies of 15-50%, outstanding phase purity and tunable shapes (nanocubes, nanowires, and nanoplatelets). Nanoplatelets spontaneously assemble into micrometer-length wires by face-to-face stacking. In addition, we demonstrate amplified spontaneous emission from thin films of green-emitting CH3NH3PbBr3 nanowires with low pumping thresholds of 3 μJ cm-2. Electronic supplementary information (ESI) available: Materials and methods, additional figures. See DOI: 10.1039/c5nr06890h

The controlling mechanism for potential loss in CH 3NH 3PbBr 3 hybrid solar cells

DOE PAGES

Zheng, Xiaojia; Chen, Bo; Yang, Mengjin; ...

2016-07-25

In this study, we investigated moisture and thermal stability of MAPbBr 3 perovskite material. Cubic MAPbBr 3 was found to be moisture-insensitive and can avoid the thermal stability issues introduced by low-temperature phase transition in MAPbI 3. MAPbBr 3 and MAPbI 3 hybrid solar cells with efficiencies of ~7.1% and ~15.5%, respectively, were fabricated, and we identified the correlation between the working temperature, light intensity, and the photovoltaic performance. No charge-carrier transport barriers were found in the MAPbBr 3 and MAPbI 3 solar cells. The MAPbBr 3 solar cell displays a better stability under high working temperature because of itsmore » close-packed crystal structure. Temperature-dependent photocurrent-voltage characteristics indicate that, unlike the MAPbI 3 solar cell with an activation energy (E A) nearly equal to its band gap (E g), the E A for the MAPbBr 3 solar cell is much lower than its E g. This indicates that a high interface recombination process limits the photovoltage and consequently the device performance of the MAPbBr 3 solar cell.« less

Stable Chloro- and Bromoxenate Cage Anions; [X3(XeO3)3]3- and [X4(XeO3)4]4- (X = Cl or Br).

PubMed

Goettel, James T; Haensch, Veit G; Schrobilgen, Gary J

2017-06-28

The number of isolable compounds which contain different noble-gas-element bonds is limited for xenon and even more so for krypton. Examples of Xe-Cl bonds are rare, and prior to this work, no Xe-Br bonded compound had been isolated in macroscopic quantities. The syntheses, isolation, and characterization of the first compounds to contain Xe-Br bonds and their chlorine analogues are described in the present work. The reactions of XeO 3 with [N(CH 3 ) 4 ]Br and [N(C 2 H 5 ) 4 ]Br have provided two bromoxenate salts, [N(C 2 H 5 ) 4 ] 3 [Br 3 (XeO 3 ) 3 ] and [N(CH 3 ) 4 ] 4 [Br 4 (XeO 3 ) 4 ], in which the cage anions have Xe-Br bond lengths that range from 3.0838(3) to 3.3181(8) Å. The isostructural chloroxenate anions (Xe-Cl bond lengths, 2.9316(2) to 3.101(4) Å) were synthesized by analogy with their bromine analogues. The bromo- and chloroxenate salts are stable in the atmosphere at room temperature and were characterized in the solid state by Raman spectroscopy and low-temperature single-crystal X-ray diffraction, and in the gas phase by quantum-chemical calculations. They are the only known examples of cage anions that contain a noble-gas element. The Xe-Br and Xe-Cl bonds are very weakly covalent and can be viewed as σ-hole interactions, similar to those encountered in halogen bonding. However, the halogen atoms in these cases are valence electron lone pair donors, and the σ* Xe-O orbitals are lone pair acceptors.

Reversible air-induced optical and electrical modulation of methylammonium lead bromide (MAPbBr3) single crystals

NASA Astrophysics Data System (ADS)

Zhang, Huotian; Liu, Yiting; Lu, Haizhou; Deng, Wan; Yang, Kang; Deng, Zunyi; Zhang, Xingmin; Yuan, Sijian; Wang, Jiao; Niu, Jiaxin; Zhang, Xiaolei; Jin, Qingyuan; Feng, Hongjian; Zhan, Yiqiang; Zheng, Lirong

2017-09-01

The photoluminescence (PL) variations of organic-inorganic hybrid lead halide perovskites in different atmospheres are well documented, while the fundamental mechanism still lacks comprehensive understandings. This study reports the reversible optical and electrical properties of methylammonium lead bromide (MAPbBr3 or CH3NH3PbBr3) single crystals caused by air infiltration. With the change in the surrounding atmosphere from air to vacuum, the PL intensity of perovskite single crystals decreases, while the conductivity increases. By means of first-principles computational studies, the shallow trap states are considered as key elements in PL and conductivity changes. These results have important implications for the characterization and application of organic-inorganic hybrid lead halide perovskites in vacuum.

A Initio Studies of Polarisabilities of Ions in Crystals.

NASA Astrophysics Data System (ADS)

Tole, Philip

Available from UMI in association with The British Library. This thesis is concerned with the ab initio calculation of polarisabilities of ions in crystals. For a binary salt the Clausius-Mossotti equation relates the refractive index to the in-crystal polarisability of the ion-pair. However, there is no experimental means of separating the sum into anion and cation components. Theoretical models which use isolated ion polarisabilities to do this are physically unrealistic and have met with little success. A much better model has been developed using ab initio all-electron CHF calculations. The in-crystal environment is represented by a 'molecular' cluster embedded in a point-charge lattice. The physical features important to the success of the model are the nearest-neighbour overlap compression and the isotropic part of the electrostatic potential arising from the point -charge lattice. Calculations on simple first row alkali halides show the cation to be independent of these forces whereas the anion becomes, smaller, more bound and less polarisable in the crystal. When corrections for correlation are added the agreement with Clausius-Mossotti polarisabilities is at the 5% level or better. This implies a reduction in polarisability by factors of up to 2 with respect to the free ion. The polarisabilities for the anions in LiF, NaF, KF, LiCl, NaCl, KCl, LiBr, NaBr, KBr, CaF _2, BeO, MgO, CaO, Li_2O, Na_2O, K_2O, BeS, CaS, Li_2S, Na_2 S and K_2S were calculated. Anion polarisability is found to vary with lattice parameter but hardly at all with coordination number. Calculations on Be_2C show that in-crystal compression is sufficient to stabilise even C^{4 -}, which has a polarisability of over 20 au. Anions at the surface of LiF and MgO were also modelled. Because anisotropic overlap and electrostatic factors tend to cancel, the ion in 5-, 4- and 3-coordinate surface sites has a polarisability only a few per cent greater than in the bulk solid. Implications for active-site theories are discussed. A calculation of the geometric derivatives of the bromide polarisability in NaBr provides physical insight into models for simulating ionic melts. Calculations on NH_sp{4}{+} and CH_3NH_sp{3 }{+} show that of electronic properties of polyatomic cations also are independent of the crystal. CHF calculation of molecular polarisability was used to examine additivity of methyl-substituted alkanes, amines and ammonium cations, (CH_3)_ {x}CH_{4-x}, (CH_3)_{x} NH_{3-x} and (CH _3)_{x} NH_sp{4-x}{+} (x = 1...4). Calculations on polyatomic anions, OH^{-} and BH_sp{4}{-}, in sodium hydroxide and sodium borohydride environment show the same trends in electronic properties as those on monatomic anions.

Light-Independent Ionic Transport in Inorganic Perovskite and Ultrastable Cs-Based Perovskite Solar Cells.

PubMed

Zhou, Wenke; Zhao, Yicheng; Zhou, Xu; Fu, Rui; Li, Qi; Zhao, Yao; Liu, Kaihui; Yu, Dapeng; Zhao, Qing

2017-09-07

Due to light-induced effects in CH 3 NH 3 -based perovskites, such as ion migration, defects formation, and halide segregation, the degradation of CH 3 NH 3 -based perovskite solar cells under maximum power point is generally implicated. Here we demonstrated that the effect of light-enhanced ion migration in CH 3 NH 3 PbI 3 can be eliminated by inorganic Cs substitution, leading to an ultrastable perovskite solar cell. Quantitatively, the ion migration barrier for CH 3 NH 3 PbI 3 is 0.62 eV under dark conditions, larger than that of CsPbI 2 Br (0.45 eV); however, it reduces to 0.07 eV for CH 3 NH 3 PbI 3 under illumination, smaller than that for CsPbI 2 Br (0.43 eV). Meanwhile, photoinduced halide segregation is also suppressed in Cs-based perovskites. Cs-based perovskite solar cells retained >99% of the initial efficiency (10.3%) after 1500 h of maximum power point tracking under AM1.5G illumination, while CH 3 NH 3 PbI 3 solar cells degraded severely after 50 h of operation. Our work reveals an uncovered mechanism for stability improvement by inorganic cation substitution in perovskite-based optoelectronic devices.

Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots.

PubMed

Cha, Mingyang; Da, Peimei; Wang, Jun; Wang, Weiyi; Chen, Zhanghai; Xiu, Faxian; Zheng, Gengfeng; Wang, Zhong-Sheng

2016-07-13

To improve the interfacial charge transfer that is crucial to the performance of perovskite solar cells, the interface engineering in a device should be rationally designed. Here we have developed an interface engineering method to tune the photovoltaic performance of planar-heterojunction perovskite solar cells by incorporating MAPbBr3-xIx (MA = CH3NH3) quantum dots (QDs) between the MAPbI3 perovskite film and the hole-transporting material (HTM) layer. By adjustment of the Br:I ratio, the as-synthesized MAPbBr3-xIx QDs show tunable fluorescence and band edge positions. When the valence band (VB) edge of MAPbBr3-xIx QDs is located below that of the MAPbI3 perovskite, the hole transfer from the MAPbI3 perovskite film to the HTM layer is hindered, and hence, the power conversion efficiency decreases. In contrast, when the VB edge of MAPbBr3-xIx QDs is located between the VB edge of the MAPbI3 perovskite film and the highest occupied molecular orbital of the HTM layer, the hole transfer from the MAPbI3 perovskite film to the HTM layer is well-facilitated, resulting in significant improvements in the fill factor, short-circuit photocurrent, and power conversion efficiency.

Heterometallic aggregates of copper(I) with metalloligand Sn(edt)2 (edt = ethane-1,2-dithiolate): syntheses and structures of [Sn(edt)2Cl(mu-I)(mu3-I)(CuPPh3)3], [Sn(edt)2(mu-Br)2(mu3-Br)2(CuPPh3)4], and [{Sn(edt)2}3(mu-OH)3Cu5(PPh3)8][PF6]2.

PubMed

Han, Yan-Gong; Xu, Chao; Duan, Taike; Wu, Fang-Hui; Zhang, Qian-Feng; Leung, Wa-Hung

2009-09-21

The treatment of a slurry of an equimolar mixture of [Sn(edt)(2)] (edt = ethane-1,2- dithiolate) and [Et(4)N]Cl.xH(2)O with CuI in the presence of PPh(3) gave a tetranuclear compound, [Sn(edt)(2)Cl(mu-I)(mu(3)-I)(CuPPh(3))(3)] (1), which consists of a rectangular-pyramidal [Sn(edt)(2)Cl](-) moiety ligated by three [Cu(PPh(3))](+) fragments via the sulfur atoms of the edt(2-) ligands. The treatment of a slurry of [Sn(edt)(2)] and excess [Et(4)N]Br with [Cu(MeCN)(4)][PF(6)] in the presence of PPh(3) afforded a pentanuclear compound, [Sn(edt)(2)(mu-Br)(2)(mu(3)-Br)(2)(CuPPh(3))(4)] (2), which comprises two [(CuPPh(3))(2)(mu-Br)](+) fragments symmetrically ligating an octahedral trans-[Sn(edt)(2)Br(2)](2-) moiety via the sulfur and bromide atoms. Reaction of [Sn(edt)(2)] with [Cu(MeCN)(4)][PF(6)] and PPh(3) in a mixed MeCN/CH(2)Cl(2) solution yielded a novel octanuclear compound, [{Sn(edt)(2)}(3)(mu-OH)(3)Cu(5)(PPh(3))(8)][PF(6)](2) (3), which may be described as a triangular [{Sn(edt)(2)}(3)(mu-OH)(3)](3-) core chelated by three [Cu(PPh(3))(2)](+) species and capped by two [Cu(PPh(3))](+) species. The luminescent properties of compounds 1, 2, and 3 were investigated in a CH(2)Cl(2) solution at room temperature. Upon excitation at lambda > 360 nm, these compounds are luminescent in CH(2)Cl(2) solution with emissions having maxima at 422, 515, and 494 nm, respectively.

Low Surface Recombination Velocity in Solution-Grown CH 3NH 3PbBr 3 Perovskite Single Crystal

DOE PAGES

Yang, Ye; Yan, Yong; Yang, Mengjin; ...

2015-08-06

Organic-inorganic hybrid perovskites are attracting intense research effort due to their impressive performance in solar cells. While the carrier transport parameters such as mobility and bulk carrier lifetime shows sufficient characteristics, the surface recombination, which can have major impact on the solar cell performance, has not been studied. Here we measure surface recombination dynamics in CH 3NH 3PbBr 3 perovskite single crystals using broadband transient reflectance spectroscopy. The surface recombination velocity is found to be 3.4±0.1 10 3 cm s -1, B2–3 orders of magnitude lower than that in many important unpassivated semiconductors employed in solar cells. Our result suggestsmore » that the planar grain size for the perovskite thin films should be larger thanB30 mm to avoid the influence of surface recombination on the effective carrier lifetime.« less

Temperature and Pressure Dependences of the Reactions of Fe+ with Methyl Halides CH3X (X = Cl, Br, I): Experiments and Kinetic Modeling Results.

PubMed

Ard, Shaun G; Shuman, Nicholas S; Martinez, Oscar; Keyes, Nicholas R; Viggiano, Albert A; Guo, Hua; Troe, Jürgen

2017-06-01

The pressure and temperature dependences of the reactions of Fe + with methyl halides CH 3 X (X = Cl, Br, I) in He were measured in a selected ion flow tube over the ranges 0.4 to 1.2 Torr and 300-600 K. FeX + was observed for all three halides and FeCH 3 + was observed for the CH 3 I reaction. FeCH 3 X + adducts (for all X) were detected in all reactions. The results were interpreted assuming two-state reactivity with spin-inversions between sextet and quartet potentials. Kinetic modeling allowed for a quantitative representation of the experiments and for extrapolation to conditions outside the experimentally accessible range. The modeling required quantum-chemical calculations of molecular parameters and detailed accounting of angular momentum effects. The results show that the FeX + products come via an insertion mechanism, while the FeCH 3 + can be produced from either insertion or S N 2 mechanisms, but the latter we conclude is unlikely at thermal energies. A statistical modeling cannot reproduce the competition between the bimolecular pathways in the CH 3 I reaction, indicating that some more direct process must be important.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, T.R.

The cyclo-addition of two Mo/sub 2/Cl/sub 4/(P(C/sub 6/H/sub 5/)/sub 3/)/sub 2/(CH/sub 3/OH)/sub 2/ molecules has produced a new type of tetrameric molybdenum cluster, Mo/sub 4/Cl/sub 8/L/sub 4/. Structural characterization of this dimer revealed weak molybdenum-methanol bonding which was consistent with the observed reactivity of the compound. New synthetic methods were devised for the preparation of Mo/sub 4/X/sub 8/L/sub 4/ clusters where X = Cl, Br, I, and L = PR/sub 3/, PO/sub 3/, RCN, CH/sub 3/OH. A scheme for the metal-metal bonding in these clusters was presented which was in agreement with the known structural features of Mo/sub 4/Cl/sub 8/(PR/submore » 3/)/sub 4/, R = C/sub 2/H/sub 5/, n-C/sub 4/H/sub 9/. The preparation of the analogous W/sub 4/Cl/sub 8/(PR/sub 3/)/sub 4/ cluster from WCl/sub 4/ was accomplished by application of techniques used in the molybdenum syntheses. The single crystal x-ray structure revealed slight differences from the molybdenum analog which were rationalized in terms of the known behavior in dimeric tungsten and molybdenum species. The attempted preparation of a tetrameric tungsten cluster from W/sub 2/(mhp)/sub 4/ was unsuccessful (mhp = anion of 2-methyl-6-hydroxypyridine). Instead, the new tungsten dimer, W/sub 2/Cl/sub 2/(mhp)/sub 3/, was isolated which possessed a metal-metal bond order of 3.5. The x-ray crystal structure of the dimer revealed that the chlorine atoms was situated cis, one bound to each tungsten. Cyclic voltammetry showed that the compound could be reversibly reduced, presumably to a W/sub 2//sup 4 +/ dimer containing a quadruple metal-metal bond.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, T.R.

The cyclo-addition of two Mo/sub 2/Cl/sub 4/(P(C/sub 6/H/sub 5/)/sub 3/)/sub 2/(CH/sub 3/OH)/sub 2/ molecules has produced a new type of tetrameric molybdenum cluster, Mo/sub 4/Cl/sub 8/L/sub 4/. Structural characterization of this dimer revealed weak molybdenum-methanol bonding which was consistent with the observed reactivity of the compound. New synthetic methods were devised for the preparation of Mo/sub 4/X/sub 8/L/sub 4/ clusters where X = Cl, Br, I and L = PR/sub 3/, Po/sub 3/, RCN, CH/sub 3/OH. A scheme for the metal-metal bonding in these clusters was presented which was in agreement with the known structural features of Mo/sub 4/Cl/sub 8/(PR/submore » 3/)/sub 4/, R = C/sub 2/H/sub 5/, n-C/sub 4/H/sub 9/. The preparation of the analogous W/sub 4/Cl/sub 8/(PR/sub 3/)/sub 4/ cluster from WCl/sub 4/ was accomplished by application of techniques used in the molybdenum syntheses. The single crystal x-ray structure revealed slight differences from the molybdenum analog which were rationalized in terms of the known behavior in dimeric tungsten and molybdenum species. The attempted preparation of a tetrameric tungsten cluster from W/sub 2/(mhp)/sub 4/ was unsuccessful (mhp = anion of 2-methyl-6-hydroxypyridine). Instead, the new tungsten dimer, W/sub 2/Cl/sub 2/(mhp)/sub 3/, was isolated which possessed a metal-metal bond order of 3.5. The x-ray crystal structure of the dimer revealed that the chlorine atoms were situated cis, one bound to each tungsten. Cyclic voltammetry showed that the compound could be reversibly reduced, presumably to a W/sub 2//sup 4 +/ dimer containing a quadruple metal-metal bond.« less

Gyroscope-like molecules consisting of PdX₂/PtX₂ rotators within three-spoke dibridgehead diphosphine stators: syntheses, substitution reactions, structures, and dynamic properties.

PubMed

Nawara-Hultzsch, Agnieszka J; Stollenz, Michael; Barbasiewicz, Michał; Szafert, Sławomir; Lis, Tadeusz; Hampel, Frank; Bhuvanesh, Nattamai; Gladysz, John A

2014-04-14

Threefold intramolecular ring-closing metatheses of trans-[MCl2(P{(CH2)(m)CH=CH2}3)2] are effected with Grubbs' catalyst. Following hydrogenation catalyzed by [RhCl(PPh3)3], the title complexes trans-[MCl2(P((CH2)n)3P)] (n=2m+2; M/n=Pt/14, 4 c; Pt/16, 4 d; Pt/18, 4 e; Pd/14, 5 c; Pd/18, 5 e) and sometimes isomers partly derived from intraligand metathesis, trans-[MCl2{P(CH2)n(CH2)n}P(CH2)n)] (4'c-e, 5'e), are isolated. These react with LiBr, NaI, and KCN to give the corresponding MBr2, MI2, and M(CN)2 species (58-99%). (13)C NMR data show that the MX2 moieties rapidly rotate within the diphosphine cage on the NMR timescale, even at -120 °C. The reaction of 4 c and KSCN gives separable Pt(NCS)2 and Pt(NCS)(SCN) adducts (13 c, 28%; 14 c, 20%), and those of 4 c,e and Ph2Zn give PtPh2 species (15 c, 61%; 15 e, 90%). (13)C NMR spectra of 13 c-15 c show two sets of CH2 signals (ca. 2:1 intensity ratios), indicating that MX2 rotation is no longer rapid. Reactions of 4 c or 4'c and excess NaC≡CH afford the free diphosphines P{(CH2)14}3P (91%) and (CH2)14P(CH2)14P(CH2)14 (90%). The latter has been crystallographically characterized as a bis(BH3) adduct. The crystal structures of eight complexes with P(CH2)14P linkages (PtCl2, PtBr2, PtI2, Pt(NCS)2, PtPh2, PdCl2, PdBr2, PdI2) and 15 e have been determined, and intramolecular distances analyzed with respect to MX2 rotation. The conformations of the (CH2)14 moieties and features of the crystal lattices are also discussed. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Long-chain alkylimidazolium ionic liquids, a new class of cationic surfactants coated on ODS columns for anion-exchange chromatography.

PubMed

Qiu, Hongdeng; Zhang, Qinghua; Chen, Limei; Liu, Xia; Jiang, Shengxiang

2008-08-01

Separations of common inorganic anions were carried out on ODS columns coated with two long-chain alkylimidazolium ionic liquids ([C(12)MIm]Br and [C(14)MIm]Br) as new cationic surfactants for ion chromatography. With phthalate buffer solution as the mobile phases and non-suppressed conductivity detection, high column efficiencies and excellent selectivity were obtained in the separation of inorganic anions. Chromatographic parameters are calculated and the results show that the coated column possesses significant potential for the analysis of some inorganic anions such as CH(3)COO(-), IO(3)(-), Cl(-), BrO(3)(-), NO(2)(-), Br(-), NO(3)(-), SO(4)(2-), I(-), BF(4)(-), and SCN(-). The effect of eluent pH values on the separation of anions has been studied on the column coated with [C(12)MIm]Br. The stability of the coated columns was also examined.

Tunable bandgap in hybrid perovskite CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) single crystals and photodetector applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L.; Duan, R. F.; Huang, F.

We report the synthesis of CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) (X=Cl and I) single crystals via a stepwise temperature control approach. High-quality CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) crystals with a tunable bandgap from 1.92 eV to 2.53 eV have been prepared successfully in this way. And further experiments revealed the influence of halogen content and preparation temperature on the structural and optical properties of these crystals. It is observed that chlorine can lower the critical nucleation energy, which results in crystallizing at lower temperature with the chlorine content increasing, while the nucleation energy increases slowly with increasing iodine content. Moreover,more » in contrast to Frank–van der Merwe growth with low heating rate, high heating rate leads to a mass of small size single crystals and Stranski-Krastanov growth. The single crystals with tunable band gap and impressive characteristics enable us to fabricate high performance photodetectors for different wavelengths.« less

Influence of 5,10-methylenetetrahydrofolate reductase polymorphism on whole-blood folate concentrations measured by LC-MS/MS, microbiologic assay, and bio-rad radioassay.

PubMed

Fazili, Zia; Pfeiffer, Christine M; Zhang, Mindy; Jain, Ram B; Koontz, Deborah

2008-01-01

The 5,10-methylenetetrahydrofolate reductase (NADPH) (MTHFR) C677T polymorphism may affect whole-blood folate pattern measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and total folate measured by LC-MS/MS, microbiologic assay, and Bio-Rad radioassay (BR). We analyzed 171 whole blood hemolysates from 2 blood banks for folate pattern and total folate concentrations using these 3 methods and determined MTHFR genotype. The median (range) total folate concentration by LC-MS/MS was higher in the US set [378 (228-820) nmol/L; n = 96] than in the European set [250 (122-582) nmol/L; n = 75]. The whole-blood folate pattern [median (range)] was similar for individuals with C/C (n = 73) and C/T (n = 66) genotype: 88% (71%-91%) and 86% (50%-91%), respectively, for 5-methyltetrahydrofolic acid (5CH(3)THF) vs 12% (9%-29%) and 14% (9%-51%) for forms other than 5-methyltetrahydrofolic acid (non-5CH(3)THF). Individuals with T/T (n = 32) genotype had 58% (22%-87%) 5CH(3)THF vs 42% (13%-78%) non-5CH(3)THF. Compared with microbiologic assay results, LC-MS/MS (r = 0.94) and BR (r = 0.87) results were significantly lower (-10% and -45%, respectively); however, these differences were concentration dependent and also genotype dependent for the BR assay (-48% for C/C+C/T and -31% for T/T). The microbiologic assay completely recovered [mean (SD)] folates added to a whole blood hemolysate, except for tetrahydrofolic acid (THF) [46.4% (8.1%)]. The BR assay under-recovered 5CH(3)THF [51% (4.1%)] and 5-formyltetrahydrofolic acid [18% (0.1%)], and over-recovered THF [152% (19%)]. MTHFR C677T polymorphism influences the folate pattern in whole blood. The agreement between total folate by LC-MS/MS and microbiologic assay, independent of the MTHFR genotype, allows the use of one regression equation. Because BR results are genotype dependent, different regression equations should be used.

Giant Rugby Ball [{CpBnFe(η5-P5)}24Cu96Br96] Derived from Pentaphosphaferrocene and CuBr2

PubMed Central

2015-01-01

The self-assembly of [CpBnFe(η5-P5)] (CpBn = η5-C5(CH2Ph)5) with CuBr2 leads to the formation of an unprecedented rugby ball-shaped supramolecule consisting of 24 units of the pentaphosphaferrocene and an extended CuBr framework, which does not follow the fullerene topology. The resulting scaffold of 312 noncarbon atoms reveals three different coordination modes of the cyclo-P5 ligand including a novel π-coordination. The outer dimensions of 3.7 × 4.6 nm of the sphere approach the range of the size of proteins. With a value of 32.1 nm3, it is 62 times larger in volume than a C60 molecule. Surprisingly, this giant rugby ball is also slightly soluble in CH2Cl2. PMID:26280785

Relaxation pathways of photoexcited iodide-methanol clusters: a computational investigation.

PubMed

Mak, Chun C; Peslherbe, Gilles H

2014-06-26

Upon photoexcitation of iodide-methanol clusters, I(-)(CH3OH)n, to a charge-transfer-to-solvent (CTTS) excited state, extensive relaxation was found to occur, accompanied by a convoluted modulation of the stability of the excited electron, which ultimately decreases substantially. In order to develop a molecular-level understanding of the relaxation processes of CTTS excited I(-)(CH3OH)n, high-level quantum chemical calculations are first used to investigate the ground, excited, and ionized states of I(-)(CH3OH)n (n = 2). Because of the relatively small size of I(-)(CH3OH)2, it was possible to characterize the contributions of solvent-solvent interactions to the stability of the CTTS excited cluster relative to dissociation into methanol, iodine, and a free electron, which exhibits a substantial dependence on the cluster geometric configuration. Ab initio molecular dynamics simulations of CTTS excited I(-)(CH3OH)3 are then performed to shed some light onto the nature of the relaxation pathways involved in the modulation of the stability of the excited electron in larger clusters. Simulation results suggest that separation of I and (CH3OH)3(-) accompanied by solvent reorganization in the latter can initially stabilize the excited electron, while gradual cluster fragmentation to I, (CH3OH)2(-), and CH3OH ultimately destabilizes it. This work shows, for the first time, that the inability of small CTTS excited I(-)(CH3OH)n to retain a solvated electron may be attributed to the limited hydrogen-bonding capacity of CH3OH, which increases the propensity for fragmentation to smaller clusters with lower excess-electron binding energies, and highlights the critical role of intricate molecular interactions in the electron solvation process.

Trapping charges at grain boundaries and degradation of CH3NH3Pb(I1-x Br x )3 perovskite solar cells.

PubMed

Nguyen, Bich Phuong; Kim, Gee Yeong; Jo, William; Kim, Byeong Jo; Jung, Hyun Suk

2017-08-04

The electrical properties of CH 3 NH 3 Pb(I 1-x Br x ) 3 (x = 0.13) perovskite materials were investigated under ambient conditions. The local work function and the local current were measured using Kelvin probe force microscopy and conductive atomic force microscopy, respectively. The degradation of the perovskite layers depends on their grain size. As the material degrades, an additional peak in the surface potential appears simultaneously with a sudden increase and subsequent relaxation of the local current. The potential bending at the grain boundaries and the intragrains is the most likely reason for the change of the local current surface of the perovskite layers. The improved understanding of the degradation mechanism garnered from this study helps pave the way toward an improved photo-conversion efficiency in perovskite solar cells.

Trapping charges at grain boundaries and degradation of CH3NH3Pb(I1-x Br x )3 perovskite solar cells

NASA Astrophysics Data System (ADS)

Phuong Nguyen, Bich; Kim, Gee Yeong; Jo, William; Kim, Byeong Jo; Jung, Hyun Suk

2017-08-01

The electrical properties of CH3NH3Pb(I1-x Br x )3 (x = 0.13) perovskite materials were investigated under ambient conditions. The local work function and the local current were measured using Kelvin probe force microscopy and conductive atomic force microscopy, respectively. The degradation of the perovskite layers depends on their grain size. As the material degrades, an additional peak in the surface potential appears simultaneously with a sudden increase and subsequent relaxation of the local current. The potential bending at the grain boundaries and the intragrains is the most likely reason for the change of the local current surface of the perovskite layers. The improved understanding of the degradation mechanism garnered from this study helps pave the way toward an improved photo-conversion efficiency in perovskite solar cells.

The synthesis of PNP-supported low-spin nitro manganese(I) carbonyl complexes

DOE PAGES

Tondreau, Aaron M.; Boncella, James M.

2016-09-01

In this study, the coordination chemistry of Mn(CO) 5Br was investigated with a series of PNP-pincer ligands. The ligands iPrPONOP ( iPrPONOP = 2,6-bis(diisopropylphosphinito)pyridine) and iPrPN HP ( iPrPN HP = HN{CH 2CH 2(PiPr 2)} 2) gave the desired organometallic manganese complexes ( iPrPONOP)Mn(CO) 2Br and ( iPrPN HP)Mn(CO) 2Br, respectively, upon chelation to Mn(CO) 5Br. The reactivity of iPrPNNNP ( iPrPNNNP = N,N'-bis(diisopropylphosphino)-2,6-diaminopyridine) with Mn(CO) 5Br yielded a pair of products, [( iPrPNNNP)Mn(CO) 3][Br] and ( iPrPNNNCO)Mn(CO) 3. The formation of the asymmetric chelate arises from a formal loss of iPr 2PBr and C–N bond formation from a carbonylmore » ligand and NH, yielding a Mn(I) amide core. The nitration reactions of ( iPrPONOP)Mn(CO) 2Br and ( iPrPN HP)Mn(CO) 2Br were carried out using silver nitrite, yielding the nitro compounds ( iPrPONOP)Mn(CO) 2(NO 2) and ( iPrPN HP)Mn(CO) 2(NO 2), respectively. The analogous iron complex ( iPrPONOP)Fe(CO)Cl 2 was nitrated under the same conditions to yield the salt pair [( iPrPONOP)Fe(CO) 2][FeCl 3NO]. This reactivity underlines the difference between iso-valent iron and manganese centers. The manganese complexes ( iPrPONOP)Mn(CO) 2(NO 2) and ( iPrPN HP)Mn(CO) 2(NO 2) were ineffective as oxygen atom transfer reagents for a variety of substrates.« less

On chemical inhibition of shock wave ignition of hydrogen-oxygen mixtures

NASA Astrophysics Data System (ADS)

Drakon, A. V.; Eremin, A. V.; Mikheyeva, E. Yu

2018-01-01

In this work an influence of the wide range of various inhibitors, namely CCl4, CF3H, C2F4Br2, (CH3O)3P, CF3I and C3F7I on shock-induced ignition of hydrogen was experimentally investigated. Observed temperature dependencies of induction times indicates that CF3H and (CH3O)3P do not show noticeable inhibiting activity at given conditions, while the effectiveness of halogen-containing specie dramatically increases in a row Cl → Br → I. It is shown that the most effective inhibitors of ignition of hydrogen-oxygen mixtures are iodinated hydrocarbons CF3I and C3F7I.

Detection methods for atoms and radicals in the gas phase

NASA Astrophysics Data System (ADS)

Hack, W.

This report lists atoms and free radicals in the gas phase which are of interest for environmental and flame chemistry and have been detected directly. The detection methods which have been used are discussed with respect to their range of application, specificity and sensitivity. In table 1, detection methods for the five atoms of group IV (C, Si, Ge, Sn, Pb) and about 60 radicals containing at least one atom of group IV are summarized (CH, Cd, Cf, CC1, CBr, Cn, Cs, CSe, CH2, CD2, Chf, Cdf, CHC1, CHBr, CF2, CC12, CBr2, CFC1, CFBr, CH3, CD3, CF3, CH2F, CH2C1, CH2Br, CHF2, CHC12, CHBr2, Hco, Fco, CH30, CD30, CH2OH, CH3S, Nco, CH4N, CH302, CF302; C2, C2N, C2H, C20, C2HO, C2H3, C2F3, C2H5, C2HsO, C2H4OH, CH3CO, CD3CO, C2H3O, C2H502, CH3COO2, C2H4N, C2H6N, C3; Si, SiF, SiF2, SiO, SiC, Si2; Ge, GeC, GeO, GeF, GeF2, GeCl2, Sn, SnF, SnO, SnF2, Pb, PbF, PbF2, PbO, PbS). In table 2 detection methods for about 25 other atoms and 60 radicals are listed: (H, D, O, O2, Oh, Od, HO2, DO2, F, Ci, Br, I, Fo, Cio, BrO, Io, FO2, C1O2, Li, Na, K, Rb, Cs, N, N3, Nh, Nd, Nf, Nci, NBr, NH2, ND2, Nhd, Nhf, NF2, NC12, N2H3, No, NO2, NO3, Hno, Dno, P, Ph, Pd, Pf, Pci, PH2, PD2, PF2, Po, As, AsO, AsS, Sb, Bi, S, S2, Sh, Sd, Sf, SF2, So, Hso, Dso, Sn, Se, Te, Se2, SeH, SeD, SeF, SeO, SeS, SeN, TeH, TeO, Bh, BH2, Bo, Bn, B02, Cd, Hg, UF5). The tables also cite some recent kinetic applications of the various methods.

Local Polar Fluctuations in Lead Halide Perovskite Crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yaffe, Omer; Guo, Yinsheng; Tan, Liang Z.

2017-03-01

Hybrid lead-halide perovskites have emerged as an excellent class of photovoltaic materials. Recent reports suggest that the organic molecular cation is responsible for local polar fluctuations that inhibit carrier recombination. We combine low-frequency Raman scattering with first-principles molecular dynamics (MD) to study the fundamental nature of these local polar fluctuations. Our observations of a strong central peak in the cubic phase of both hybrid (CH3NH3PbBr3) and all-inorganic (CsPbBr3) leadhalide perovskites show that anharmonic, local polar fluctuations are intrinsic to the general lead-halide perovskite structure, and not unique to the dipolar organic cation. MD simulations indicate that head-tohead Cs motion coupledmore » to Br face expansion, occurring on a few hundred femtosecond time scale, drives the local polar fluctuations in CsPbBr3.« less

Retinal Chromophore Structure and Schiff Base Interactions in Red-Shifted Channelrhodopsin-1 from Chlamydomonas augustae

PubMed Central

2015-01-01

Channelrhodopsins (ChRs), which form a distinct branch of the microbial rhodopsin family, control phototaxis in green algae. Because ChRs can be expressed and function in neuronal membranes as light-gated cation channels, they have rapidly become an important optogenetic tool in neurobiology. While channelrhodopsin-2 from the unicellular alga Chlamydomonas reinhardtii (CrChR2) is the most commonly used and extensively studied optogenetic ChR, little is known about the properties of the diverse group of other ChRs. In this study, near-infrared confocal resonance Raman spectroscopy along with hydrogen–deuterium exchange and site-directed mutagenesis were used to study the structure of red-shifted ChR1 from Chlamydomonas augustae (CaChR1). These measurements reveal that (i) CaChR1 has an all-trans-retinal structure similar to those of the light-driven proton pump bacteriorhodopsin (BR) and sensory rhodopsin II but different from that of the mixed retinal composition of CrChR2, (ii) lowering the pH from 7 to 2 or substituting neutral residues for Glu169 or Asp299 does not significantly shift the ethylenic stretch frequency more than 1–2 cm–1 in contrast to BR in which a downshift of 7–9 cm–1 occurs reflecting neutralization of the Asp85 counterion, and (iii) the CaChR1 protonated Schiff base (SB) has stronger hydrogen bonding than BR. A model is proposed to explain these results whereby at pH 7 the predominant counterion to the SB is Asp299 (the homologue to Asp212 in BR) while Glu169 (the homologue to Asp85 in BR) exists in a neutral state. We observe an unusual constancy of the resonance Raman spectra over the broad range from pH 9 to 2 and discuss its implications. These results are in accord with recent visible absorption and current measurements of CaChR1 [Sineshchekov, O. A., et al. (2013) Intramolecular proton transfer in channelrhodopsins. Biophys. J. 104, 807–817; Li, H., et al. (2014) Role of a helix B lysine residue in the photoactive site in channelrhodopsins. Biophys. J. 106, 1607–1617]. PMID:24869998

Group-12 metal complexes with isomeric 1-(diphenylphosphino)-1'-[N-(pyridylmethyl)carbamoyl]ferrocenes: coordination polymers vs. finite multinuclear coordination assemblies.

PubMed

Kühnert, Janett; Císarová, Ivana; Lamac, Martin; Stepnicka, Petr

2008-05-14

The isomeric ferrocene phosphine-carboxamides, 1-(diphenylphosphino)-1'-{[N-(2-pyridyl)-methyl]carbamoyl}ferrocene (1) and 1-(diphenylphosphino)-1'-{[N-(4-pyridyl)methyl]carbamoyl}ferrocene (2) have been studied as ligands in group-12 metal bromide complexes. The reactions of 1 with CdBr2 x 4H2O and HgBr(2) at 1:1 mole ratio gave the discrete tetracadmium complex [Cd2(micro-Br)2(-1kappa2O,N2)2[micro-1kappa2O,N2:2kappaP-(C5H4N)CH2NHC(O)fcPPh2-CdBr3]2] (7; fc = ferrocene-1,1'-diyl) and the halogeno-bridged dimer [[Hg(micro-Br)Br(-kappaP)]2] (8), respectively. In the presence of acetic acid, the CdBr2-1 system furnished a zwitterionic complex featuring protonated 1 as the P-monodentate donor, [CdBr3[Ph2PfcC(O)NHCH2(C5H4NH)-kappaP

A comparative DFT study of interactions of Au and small gold clusters Aun (n = 2-4) with CH3S and CH2 radicals

NASA Astrophysics Data System (ADS)

Blaško, Martin; Rajský, Tomáš; Urban, Miroslav

2017-03-01

We compare DFT binding energies (BEs) of Au and small gold clusters interacting with CH3S and CH2 ligands (Aun-L complexes, n = 1-4). The spin state and the binding mechanism in Aun-L varies with the participation of singly occupied non-bonding orbitals or doubly occupied lone-pair orbitals of a ligand and on the number of atoms (even or odd) of Aun. The highest BE, 354 kJ/mol, exhibits the Au3-CH2 complex with the covalent bond in which participate two singly occupied orbitals of the triplet state of CH2. With CH3S the highest BE (277 kJ/mol) is calculated for Au3-SCH3 with the single Au-S bond.

Controlled Pd(0)/t Bu3P Catalyzed Suzuki Cross-Coupling Polymerization of AB-Type Monomers with ArPd(t Bu3P)X or Pd2(dba)3/t Bu3P/ArX as the Initiator

DOE PAGES

Zhang, Honghai; Xing, Chun-Hui; Hu, Qiao-Sheng; ...

2015-02-05

The synthesis of well-defined and functionalized conjugated polymers, which are essential in the development of efficient organic electronics, through Suzuki cross-coupling polymerizations has been a challenging task. We developed controlled Pd(0)/t-Bu3P-catalyzed Suzuki cross-coupling polymerizations of AB-type monomers via the chain-growth mechanism with a series of in situ generated ArPd(t-Bu3P)X (X = I, Br, Cl) complexes as initiators. Among them, the combinations of Pd2(dba)3/t-Bu3P/p-BrC6H4I, Pd2(dba)3/t-Bu3P/p-BrC6H4CH2OH and Pd2(dba)3/t-Bu3P/p-PhCOC6H4Br were identified as highly robust initiator systems, resulting in polymers with predictable molecular weight and narrow polydispersity (PDI~1.13-1.20). In addition, Pd2(dba)3/t-Bu3P/p-BrC6H4CH2OH and Pd2(dba)3/t-Bu3P/p-PhCOC6H4Br initiator systems afforded functional polymers with >95% fidelity. Our results pavedmore » the road to access well-defined conjugated polymers, including conjugated polymers with complex polymer architectures such as block copolymers and branch copolymers.« less

Fragmentation dynamics of the ethyl bromide and ethyl iodide cations: a velocity-map imaging study.

PubMed

Gardiner, Sara H; Karsili, Tolga N V; Lipciuc, M Laura; Wilman, Edward; Ashfold, Michael N R; Vallance, Claire

2014-02-07

The photodissociation dynamics of ethyl bromide and ethyl iodide cations (C2H5Br(+) and C2H5I(+)) have been studied. Ethyl halide cations were formed through vacuum ultraviolet (VUV) photoionization of the respective neutral parent molecules at 118.2 nm, and were photolysed at a number of ultraviolet (UV) photolysis wavelengths, including 355 nm and wavelengths in the range from 236 to 266 nm. Time-of-flight mass spectra and velocity-map images have been acquired for all fragment ions and for ground (Br) and spin-orbit excited (Br*) bromine atom products, allowing multiple fragmentation pathways to be investigated. The experimental studies are complemented by spin-orbit resolved ab initio calculations of cuts through the potential energy surfaces (along the RC-Br/I stretch coordinate) for the ground and first few excited states of the respective cations. Analysis of the velocity-map images indicates that photoexcited C2H5Br(+) cations undergo prompt C-Br bond fission to form predominantly C2H5(+) + Br* products with a near-limiting 'parallel' recoil velocity distribution. The observed C2H3(+) + H2 + Br product channel is thought to arise via unimolecular decay of highly internally excited C2H5(+) products formed following radiationless transfer from the initial excited state populated by photon absorption. Broadly similar behaviour is observed in the case of C2H5I(+), along with an additional energetically accessible C-I bond fission channel to form C2H5 + I(+) products. HX (X = Br, I) elimination from the highly internally excited C2H5X(+) cation is deemed the most probable route to forming the C2H4(+) fragment ions observed from both cations. Finally, both ethyl halide cations also show evidence of a minor C-C bond fission process to form CH2X(+) + CH3 products.

The Synthesis of Potential Antiparasitic Drugs

DTIC Science & Technology

1990-05-01

CF3 24. R - 4-Cl,3-CF3 Scheme 1, Continued 38 Contract No. DAMD17-88-C-8106 O >—-(.CH2)5-B Br(CH2) sBr 25 26. P. • 4-C1 27. R a 2-CF3 28. R...methyl-4-phthalimidobuty- lamino)quinoLine (63) A stirred mixture of 51 (3.27 g, 0.009 mol) and 4-bromo-l-phthalimido- pentane ( BPP ) (5.23 g...0.018 mol) was heated at 120-125°C while Et.N (3 ml) was slowly added during 30 min. After 3.5h at 120-125°C, more BPP (3.42 g, 0.012 mol) and Et^N (2

Theoretical study of the kinetics of reactions of the monohalogenated methanes with atomic chlorine.

PubMed

Brudnik, Katarzyna; Twarda, Maria; Sarzyński, Dariusz; Jodkowski, Jerzy T

2013-04-01

Ab initio calculations at the G2 level were used in a theoretical description of the kinetics and mechanism of the hydrogen abstraction reactions from fluoro-, chloro- and bromomethane by chlorine atoms. The profiles of the potential energy surfaces show that mechanism of the reactions under investigation is complex and consists of two - in the case of CH3F+Cl - and of three elementary steps for CH3Cl+Cl and CH3Br+Cl. The heights of the energy barrier related to the H-abstraction are of 8-10 kJ mol(-1), the lowest value corresponds to CH3Cl+Cl and the highest one to CH3F+Cl. The rate constants were calculated using the theoretical method based on the RRKM theory and the simplified version of the statistical adiabatic channel model. The kinetic equations derived in this study[Formula: see text]and[Formula: see text]allow a description of the kinetics of the reactions under investigation in the temperature range of 200-3000 K. The kinetics of reactions of the entirely deuterated reactants were also included in the kinetic analysis. Results of ab initio calculations show that D-abstraction process is related with the energy barrier of 5 kJ mol(-1) higher than the H-abstraction from the corresponding non-deuterated reactant molecule. The derived analytical equations for the reactions, CD3X+Cl, CH2X+HCl and CD2X+DCl (X = F, Cl and Br) are a substantial supplement of the kinetic data necessary for the description and modeling of the processes of importance in the atmospheric chemistry.

Gas chromatography coupled to tunable pulsed glow discharge time-of-flight mass spectrometry for environmental analysis.

PubMed

Solà-Vázquez, Auristela; Lara-Gonzalo, Azucena; Costa-Fernández, José M; Pereiro, Rosario; Sanz-Medel, Alfredo

2010-05-01

A tuneable microsecond pulsed direct current glow discharge (GD)-time-of-flight mass spectrometer MS(TOF) developed in our laboratory was coupled to a gas chromatograph (GC) to obtain sequential collection of the mass spectra, at different temporal regimes occurring in the GD pulses, during elution of the analytes. The capabilities of this set-up were explored using a mixture of volatile organic compounds of environmental concern: BrClCH, Cl(3)CH, Cl(4)C, BrCl(2)CH, Br(2)ClCH, Br(3)CH. The experimental parameters of the GC-pulsed GD-MS(TOF) prototype were optimized in order to separate appropriately and analyze the six selected organic compounds, and two GC carrier gases, helium and nitrogen, were evaluated. Mass spectra for all analytes were obtained in the prepeak, plateau and afterpeak temporal regimes of the pulsed GD. Results showed that helium offered the best elemental sensitivity, while nitrogen provided higher signal intensities for fragments and molecular peaks. The analytical performance characteristics were also worked out for each analyte. Absolute detection limits obtained were in the order of ng. In a second step, headspace solid phase microextraction (HS SPME), as sample preparation and preconcentration technique, was evaluated for the quantification of the compounds under study, in order to achieve the required analytical sensitivity for trihalomethanes European Union (EU) environmental legislation. The analytical figures of merit obtained using the proposed methodology showed rather good detection limits (between 2 and 13 microg L(-1) depending on the analyte). In fact, the developed methodology met the EU legislation requirements (the maximum level permitted in tap water for the "total trihalomethanes" is set at 100 microg L(-1)). Real analysis of drinking water and river water were successfully carried out. To our knowledge this is the first application of GC-pulsed GD-MS(TOF) for the analysis of real samples. Its ability to provide elemental, fragments and molecular information of the organic compounds is demonstrated.

Protein-functionalized hairy diamond nanoparticles.

PubMed

Dahoumane, Si Amar; Nguyen, Minh Ngoc; Thorel, Alain; Boudou, Jean-Paul; Chehimi, Mohamed M; Mangeney, Claire

2009-09-01

Diazonium salt chemistry and atom transfer radical polymerization (ATRP) were combined in view of preparing new bioactive hairy diamond nanoparticles containing, or potentially containing, nitrogen-vacancy (NV) fluorescent centers (fluorescent nanodiamonds, or fNDs). fNDs were modified by ATRP initiators using the electroless reduction of the diazonium salt BF(4)(-),(+)N(2)-C(6)H(4)-CH(CH(3))-Br. The strongly bound aryl groups -C(6)H(4)-CH(CH(3))-Br efficiently initiated the ATRP of tert-butyl methacrylate (tBMA) at the surface of the nanodiamonds, which resulted in obtaining ND-PtBMA hybrids. The grafted chain thickness, estimated from X-ray photoelectron spectroscopy (XPS), was found to increase linearly with respect to time before reaching a plateau value of ca. 2 nm. These nanoobjects were further hydrolyzed into ND-PMAA (where PMAA is the poly(methacrylic acid) graft) and further decorated by bovine serum albumin through the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) coupling procedure.

Theoretical studies on photoelectron and IR spectral properties of Br2.-(H2O)n clusters.

PubMed

Pathak, A K; Mukherjee, T; Maity, D K

2007-07-28

We report vertical detachment energy (VDE) and IR spectra of Br2.-.(H2O)n clusters (n=1-8) based on first principles electronic structure calculations. Cluster structures and IR spectra are calculated at Becke's half-and-half hybrid exchange-correlation functional (BHHLYP) with a triple split valence basis function, 6-311++G(d,p). VDE for the hydrated clusters is calculated based on second order Moller-Plesset perturbation (MP2) theory with the same set of basis function. On full geometry optimization, it is observed that conformers having interwater hydrogen bonding among solvent water molecules are more stable than the structures having double or single hydrogen bonded structures between the anionic solute, Br2.-, and solvent water molecules. Moreover, a conformer having cyclic interwater hydrogen bonded network is predicted to be more stable for each size hydrated cluster. It is also noticed that up to four solvent H2O units can reside around the solute in a cyclic interwater hydrogen bonded network. The excess electron in these hydrated clusters is localized over the solute atoms. Weighted average VDE is calculated for each size (n) cluster based on statistical population of the conformers at 150 K. A linear relationship is obtained for VDE versus (n+3)(-1/3) and bulk VDE of Br2.- aqueous solution is calculated as 10.01 eV at MP2 level of theory. BHHLYP density functional is seen to make a systematic overestimation in VDE values by approximately 0.5 eV compared to MP2 data in all the hydrated clusters. It is observed that hydration increases VDE of bromine dimer anion system by approximately 6.4 eV. Calculated IR spectra show that the formation of Br2.--water clusters induces large shifts from the normal O-H stretching bands of isolated water keeping bending modes rather insensitive. Hydrated clusters, Br2.-.(H2O)n, show characteristic sharp features of O-H stretching bands of water in the small size clusters.

Theoretical studies on photoelectron and IR spectral properties of Br2.-(H2O)n clusters

NASA Astrophysics Data System (ADS)

Pathak, A. K.; Mukherjee, T.; Maity, D. K.

2007-07-01

We report vertical detachment energy (VDE) and IR spectra of Br2•-•(H2O)n clusters (n=1-8) based on first principles electronic structure calculations. Cluster structures and IR spectra are calculated at Becke's half-and-half hybrid exchange-correlation functional (BHHLYP) with a triple split valence basis function, 6-311++G(d,p). VDE for the hydrated clusters is calculated based on second order Moller-Plesset perturbation (MP2) theory with the same set of basis function. On full geometry optimization, it is observed that conformers having interwater hydrogen bonding among solvent water molecules are more stable than the structures having double or single hydrogen bonded structures between the anionic solute, Br2•-, and solvent water molecules. Moreover, a conformer having cyclic interwater hydrogen bonded network is predicted to be more stable for each size hydrated cluster. It is also noticed that up to four solvent H2O units can reside around the solute in a cyclic interwater hydrogen bonded network. The excess electron in these hydrated clusters is localized over the solute atoms. Weighted average VDE is calculated for each size (n) cluster based on statistical population of the conformers at 150K. A linear relationship is obtained for VDE versus (n+3)-1/3 and bulk VDE of Br2•- aqueous solution is calculated as 10.01eV at MP2 level of theory. BHHLYP density functional is seen to make a systematic overestimation in VDE values by ˜0.5eV compared to MP2 data in all the hydrated clusters. It is observed that hydration increases VDE of bromine dimer anion system by ˜6.4eV. Calculated IR spectra show that the formation of Br2•--water clusters induces large shifts from the normal O-H stretching bands of isolated water keeping bending modes rather insensitive. Hydrated clusters, Br2•-•(H2O)n, show characteristic sharp features of O-H stretching bands of water in the small size clusters.

Photodissociation of nitromethane cluster anions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goebbert, Daniel J.; Khuseynov, Dmitry; Sanov, Andrei

2010-08-28

Three types of anionic fragments are observed in the photodissociation of nitromethane cluster anions, (CH{sub 3}NO{sub 2}){sub n}{sup -}, n=1-6, at 355 nm: NO{sub 2}{sup -}(CH{sub 3}NO{sub 2}){sub k}, (CH{sub 3}NO{sub 2}){sub k}{sup -}, and OH{sup -} (k

Unusual structural phase transition in [N(C2H5)4][N(CH3)4][ZnBr4

NASA Astrophysics Data System (ADS)

Krawczyk, Monika K.; Ingram, Adam; Cach, Ryszard; Czapla, Zbigniew; Czupiński, Olaf; Dacko, Sławomir; Staniorowski, Piotr

2018-04-01

The new hybrid organic-inorganic crystal [N(C2H5)4][N(CH3)4][ZnBr4] was grown and its physical properties and structural phase transition are presented. On the basis of thermal analysis (DSC (differential scanning calorimetry), DTA (differential thermal analysis), DTG), X-ray structural, dilatometric and dielectric studies as well as optical observation, the reversible first-order phase transition at 490/488 K on heating and cooling run, respectively, has been found. An appearance of domain structure of ferroelastic type gives evidence for an untypical lowering of crystal symmetry during the phase transition. At room temperature, the satisfying crystal structure solution was found in the tetragonal system, in the P?21m space group.

Top quark decays with flavor violation in the B-LSSM

NASA Astrophysics Data System (ADS)

Yang, Jin-Lei; Feng, Tai-Fu; Zhang, Hai-Bin; Ning, Guo-Zhu; Yang, Xiu-Yi

2018-06-01

The decays of top quark t→ cγ ,t→ cg,t→ cZ,t→ ch are extremely rare processes in the standard model (SM). The predictions on the corresponding branching ratios in the SM are too small to be detected in the future, hence any measurable signal for the processes at the LHC is a smoking gun for new physics. In the extension of minimal supersymmetric standard model with an additional local U(1)_B {-}L gauge symmetry (B-LSSM), new gauge interaction and new flavor changing interaction affect the theoretical evaluations on corresponding branching ratios of those processes. In this work, we analyze those processes in the B-LSSM, under a minimal flavor violating assumption for the soft breaking terms. Considering the constraints from updated experimental data, the numerical results imply Br(t→ cγ )˜ 5× 10^{-7}, Br(t→ cg)˜ 2× 10^{-6}, Br(t→ cZ)˜ 4× 10^{-7} and Br(t→ ch)˜ 3× 10^{-9} in our chosen parameter space. Simultaneously, new gauge coupling constants g_{_B},g_{_{YB}} in the B-LSSM can also affect the numerical results of Br(t→ cγ ,cg,cZ,ch).

Cluster size resolving analysis of CH3F-(ortho-H2)n in solid para-hydrogen using FTIR absorption spectroscopy at 3 μm region.

PubMed

Miyamoto, Yuki; Momose, Takamasa; Kanamori, Hideto

2012-11-21

Infrared absorption spectra of methyl fluoride with ortho-hydrogen (ortho-H(2)) clusters in a solid para-hydrogen (para-H(2)) crystal at 3.6 K were studied in the C-H stretching fundamental region (~3000 cm(-1)) using an FTIR spectrometer. As shown previously, the ν(3) C-F stretching fundamental band of CH(3)F-(ortho-H(2))(n) (n = 0, 1, 2, ...) clusters at 1040 cm(-1) shows a series of n discrete absorption lines, which correspond to different-sized clusters. We observed three unresolved broad peaks in the C-H stretching region and applied this cluster model to them assuming the same intensity distribution function as the ν(3) band. A fitting analysis successfully gave us the linewidth and lineshift of the components in each vibrational band. It was found that the separately determined linewidth, matrix shift of the band origin, and cluster shift are dependent on the vibrational mode. From the transition intensities of the monomer component derived from the fitting analysis, we discuss the mixing ratio of the vibrational modes due to Fermi resonance.

Reductive dehalogenation of 5-bromouracil by aliphatic organic radicals in aqueous solutions; electron transfer and proton-coupled electron transfer mechanisms

NASA Astrophysics Data System (ADS)

Matasović, Brunislav; Bonifačić, Marija

2011-06-01

Reductive dehalogenation of 5-bromouracil by aliphatic organic radicals CO2-rad , rad CH 2OH, rad CH(CH 3)OH, and rad CH(CH 3)O - have been studied in oxygen free aqueous solutions in the presence of organic additives: formate, methanol or ethanol. For radicals production 60Co γ-radiolysis was employed and the yield of bromide was measured by means of ion chromatography. Both radical anions have reducing potential negative enough to transfer an electron to BrU producing bromide ion and U rad radical. High yields of bromide have been measured increasing proportional to the concentration of the corresponding organic additives at a constant dose rate. This is characteristic for a chain process where regeneration of radical ions occurs by H-atom abstraction by U rad radical from formate or ethanol. Results with the neutral radicals conformed earlier proposition that the reduction reaction of α-hydroxyalkyl radicals proceeds by the proton-coupled electron transfer mechanism ( Matasović and Bonifačić, 2007). Thus, while both rad CH 2OH and rad CH(CH 3)OH did not react with BrU in water/alcohol solutions, addition of bicarbonate and acetate in mmol dm -3 concentrations, pH 7, brought about chain debromination to occur in the case of rad CH(CH 3)OH radical as reactant. Under the same conditions phosphate buffer, a base with higher bulk proton affinity, failed to have any influence. The results are taken as additional proofs for the specific complex formation of α-hydroxyalkyl radicals with suitable bases which enhances radicals' reduction potential in comparison with only water molecules as proton acceptors. Rate constants for the H-atom abstraction from ethanol and formate by U rad radicals have been estimated to amount to about ≥85 and 1200 dm 3 mol -1 s -1, respectively.

Electron-Rich Carboranes. Studies of a Stereochemically Novel System, (CH3)4C4B7H9, and 11-Vertex Arachno Cluster.

DTIC Science & Technology

1981-01-01

FINSTER , R N GRIMES NOGOIR-75C-0305 UNCLASSIFIED TR-37 NL EOMEEEhE OFFICE OF NAVAL RESEARCH CONTRACT NO. i14.-7-C-31 q,4 TECHNICAL REPORT NO. 37L" 0...Electron-Rich Carboranes. Studies of a Stereochemically Novel System, (CH") 4C4 BH 9 , an 11-Vertex Arachno Cluster. .) David C./ Finster aad Russell N...System, (CH3 )4C4B7H9 , an l-Vertex Arachno Cluster 1 David C. Finster and Russell N. Grimes* Contribution from the Department of Chemistry University of

Cluster Quantum Chemical Study of the Grignard Reagent Formation

NASA Astrophysics Data System (ADS)

Tulub, A. V.; Porsev, V. V.

The main stages of the Grignard reagent formation are described in a framework of quantum chemical cluster model. We have established two kinds of the adsorption of CH3Hal on Mgn clusters, one of which leads to radical formation and the second is responsible for radical free dissociate adsorption. The charge redistribution in cluster CH3MgnHal result to the strong electrostatic interaction with ether and Grignard reagent formation without any activation barrier.

Infrared absorption of methanethiol clusters (CH3SH)n, n = 2-5, recorded with a time-of-flight mass spectrometer using IR depletion and VUV ionization

NASA Astrophysics Data System (ADS)

Fu, Lung; Han, Hui-Ling; Lee, Yuan-Pern

2012-12-01

We investigated IR spectra in the CH- and SH-stretching regions of size-selected methanethiol clusters, (CH3SH)n with n = 2-5, in a pulsed supersonic jet using infrared (IR)-vacuum ultraviolet (VUV) ionization. VUV emission at 132.50 nm served as the source of ionization in a time-of-flight mass spectrometer. Clusters were dissociated with light from a tunable IR laser before ionization. The variations in intensity of methanethiol cluster ions (CH3SH)n+ were monitored as the IR laser light was tuned across the range 2470-3100 cm-1. In the SH-stretching region, the spectrum of (CH3SH)2 shows a weak band near 2601 cm-1, red-shifted only 7 cm-1 from that of the monomer. In contrast, all spectra of (CH3SH)n, n = 3-5, show a broad band near 2567 cm-1 with much greater intensity. In the CH-stretching region, absorption bands of (CH3SH)2 are located near 2865, 2890, 2944, and 3010 cm-1, red-shifted by 3-5 cm-1 from those of CH3SH. These red shifts increase slightly for larger clusters and bands near 2856, 2884, 2938, and 3005 cm-1 were observed for (CH3SH)5. These spectral results indicate that the S-H...S hydrogen bond plays an important role in clusters with n = 3-5, but not in (CH3SH)2, in agreement with theoretical predictions. The absence of a band near 2608 cm-1 that corresponds to absorption of the non-hydrogen-bonded SH moiety and the large width of observed feature near 2567 cm-1 indicate that the dominant stable structures of (CH3SH)n, n = 3-5, have a cyclic hydrogen-bonded framework.

Ab initio studies on the solvation, electronic structures and intracluster reactions in M(+)L(n), with M(+)=magnesium and calcium singly-charged ions, L=water, methanol, ammonia, and n=1-6, and the elimination of a hydrogen atom in H atom in hydrated sodium clusters

NASA Astrophysics Data System (ADS)

Chan, Ka Wai

The solvation and electronic structures of M+Ln, with M+ = Mg+ and Cat, L = H2O, CH 3OH and NH3, n=1-6 were investigated by ab initio calculations using G03 package and density functional theory based ab initio molecular dynamics (AIMD) simulations with projector augmented-wave (PAW) method and a planewave basis set using Vienna Ab initio Simulation Package (VASP). Furthermore, ab initio studies on the intracluster reactions of Mg+ and Ca+ ions with different solvent molecules, H2O, CH3OH and NH3, were also done using G03 package. Finally, the elimination of a H atom in Na(H2O)n was studied. Such studies on the interactions and reactivity in gas clusters can provide insights into their analogies existing in condense phase. Interactions of Mg+ and Ca+ ions in different solvent molecules, H2O, CH3OH and NH3, were calculated with B3LYP and MP2 methods with basis sets 6-31+g** and 6-311+g**. A systematic comparison on the structures and reactivities of these clusters should provide a better understanding on the interplay of the ion-solvent, solvent-solvent, and electron-solvent interactions. It can provide a better understanding on the structures and bonding of complexes having analogies to those existing in condense phase. For Mg+(CH3OH)n and Ca+(CH 3OH)n, both H-elimination from OH/CH bond and CH3-elimination were investigated. H-elimination from O---H bond becomes more accessible for large cluster due to the diffusion of electron density to O---H bond. Studies on the H-elimination in Mg+(NH3)n and H-elimination from C---H bond in Mg+(CH3OH) n show that the reaction barriers flatten above 20 kcal/mol as n reaches 4 and above. These calculation results prove that the source of loss of H atom in ground state Mg+(CH3OH)n should be through the O---H bond rather than through the C---H bond. Compared to Mg+(CH3OH)n, the reaction barriers for H-elimination in Mg+(NH3)n is much larger, which is in consistent with the experimental observation of little H-elimination for Mg+(NH3)n unless it's photo-excited. The examination of neutral Na(H2O)n clusters, n=4~15 for H-elimination was carried out. The reaction profile for H-elimination was obtained by energy minimization at constrained O---H distance which was successively increased. There was a general trend of decreasing reaction barrier, as the cluster size grows. In contrast to Mg+(H 2O)n, the expected switch-off of H-elimination as in Mg +(H2O)n cannot be observed.

Atmospheric test of the J(BrONO2)/kBrO+NO2 ratio: implications for total stratospheric Bry and bromine-mediated ozone loss

NASA Astrophysics Data System (ADS)

Kreycy, S.; Camy-Peyret, C.; Chipperfield, M. P.; Dorf, M.; Feng, W.; Hossaini, R.; Kritten, L.; Werner, B.; Pfeilsticker, K.

2013-07-01

We report on time-dependent O3, NO2 and BrO profiles measured by limb observations of scattered skylight in the stratosphere over Kiruna (67.9° N, 22.1° E) on 7 and 8 September 2009 during the autumn circulation turn-over. The observations are complemented by simultaneous direct solar occultation measurements around sunset and sunrise performed aboard the same stratospheric balloon payload. Supporting radiative transfer and photochemical modelling indicate that the measurements can be used to constrain the ratio J(BrONO2)/kBrO+NO2, for which at T = 220 ± 5 K an overall 1.7 (+0.4 -0.2) larger ratio is found than recommended by the most recent Jet Propulsion Laboratory (JPL) compilation (Sander et al., 2011). Sensitivity studies reveal the major reasons are likely to be (1) a larger BrONO2 absorption cross-section σBrONO2, primarily for wavelengths larger than 300 nm, and (2) a smaller kBrO+NO2 at 220 K than given by Sander et al. (2011). Other factors, e.g. the actinic flux and quantum yield for the dissociation of BrONO2, can be ruled out. The observations also have consequences for total inorganic stratospheric bromine (Bry) estimated from stratospheric BrO measurements at high NOx loadings, since the ratio J(BrONO2)/kBrO+NO2 largely determines the stratospheric BrO/Bry ratio during daylight. Using the revised J(BrONO2)/kBrO+NO2 ratio, total stratospheric Bry is likely to be 1.4 ppt smaller than previously estimated from BrO profile measurements at high NOx loadings. This would bring estimates of Bry inferred from organic source gas measurements (e.g. CH3Br, the halons, CH2Br2, CHBr3, etc.) into closer agreement with estimates based on BrO observations (inorganic method). The consequences for stratospheric ozone due to the revised J(BrONO2)/kBrO+NO2 ratio are small (maximum -0.8%), since at high NOx (for which most Bry assessments are made) the enhanced ozone loss by overestimating Bry is compensated for by the suppressed ozone loss due to the underestimation of BrO/Bry with a smaller J(BrONO2)/kBrO+NO2 ratio.

Local polar fluctuations in lead halide perovskite crystals

DOE PAGES

Yaffe, Omer; Guo, Yinsheng; Tan, Liang Z.; ...

2017-03-28

Hybrid lead-halide perovskites have emerged as an excellent class of photovoltaic materials. Recent reports suggest that the organic molecular cation is responsible for local polar fluctuations that inhibit carrier recombination. We combine low-frequency Raman scattering with first-principles molecular dynamics (MD) to study the fundamental nature of these local polar fluctuations. Our observations of a strong central peak in the cubic phase of both hybrid (CH 3NH 3PbBr 3) and all-inorganic (CsPbBr 3) lead-halide perovskites show that anharmonic, local polar fluctuations are intrinsic to the general lead-halide perovskite structure, and not unique to the dipolar organic cation. Furthermore, MD simulations indicatemore » that head-to-head Cs motion coupled to Br face expansion, occurring on a few hundred femtosecond time scale, drives the local polar fluctuations in CsPbBr 3.« less

Dendrimer ligands-capped CH3NH3PbBr3 perovskite nanocrystals with delayed halide exchange and record stability against both moisture and water.

PubMed

Xu, Yiren; Xu, Shuhong; Shao, Haibao; Jiang, Han; Cui, Yiping; Wang, Chunlei

2018-06-08

CH 3 NH 3 PbBr 3 perovskite nanocrystals (NCs) suffer from poor stability because of their high sensitivity to environmental moisture and water. To solve this problem, previous works mainly focus on embedding perovskite NCs into water-resistant matrix to form large composites (size of microns or larger). As an alternative solution without serious changing of NC size, enhancing the stability of perovskite NCs themselves by ligand engineering is rarely reported. In this work, we used hyperbranched polyamidoamine (PAMAM) dendrimers with two different generations (G0 and G4) to synthesize CH 3 NH 3 PbBr 3 perovskite NCs with high photoluminescence (PL) quantum yields (QY) above 70% and a new record stability. A novel dendrimers generation-dependent stability of perovskite NCs was observed. The water-resistance time is 18 h (27 h) for perovskite NCs capped by G0 (G4) generation of PAMAM, which is 7 times (11 times) longer than that of traditional oleic acid-capped NCs. Similar PAMAM generation-related stability is also observed in moisture-resistance tests. The stability time against moisture is 500 h (800 h) for G0 (G4) generation of PAMAM-capped perovskite NCs, which is a new record stability time against moisture for CH 3 NH 3 PbBr 3 perovskite NCs. In addition, our results also indicate that PAMAM ligands outside perovskite NCs can dramatically slow down the speed of halide exchange. Even for the mixture of perovskite NCs with two different halide composition, the original luminescence properties of PAMAM-capped perovskite NCs can retain after mixing. In view of slow halide exchange speed, excellent water and moisture stability, PAMAM dendrimers-capped perovskite NCs and their mixture are available as color conversion single layer in fabrication of light-emitting diodes (LED).

Dendrimer ligands-capped CH3NH3PbBr3 perovskite nanocrystals with delayed halide exchange and record stability against both moisture and water

NASA Astrophysics Data System (ADS)

Xu, Yiren; Xu, Shuhong; Shao, Haibao; Jiang, Han; Cui, Yiping; Wang, Chunlei

2018-06-01

CH3NH3PbBr3 perovskite nanocrystals (NCs) suffer from poor stability because of their high sensitivity to environmental moisture and water. To solve this problem, previous works mainly focus on embedding perovskite NCs into water-resistant matrix to form large composites (size of microns or larger). As an alternative solution without serious changing of NC size, enhancing the stability of perovskite NCs themselves by ligand engineering is rarely reported. In this work, we used hyperbranched polyamidoamine (PAMAM) dendrimers with two different generations (G0 and G4) to synthesize CH3NH3PbBr3 perovskite NCs with high photoluminescence (PL) quantum yields (QY) above 70% and a new record stability. A novel dendrimers generation-dependent stability of perovskite NCs was observed. The water-resistance time is 18 h (27 h) for perovskite NCs capped by G0 (G4) generation of PAMAM, which is 7 times (11 times) longer than that of traditional oleic acid-capped NCs. Similar PAMAM generation-related stability is also observed in moisture-resistance tests. The stability time against moisture is 500 h (800 h) for G0 (G4) generation of PAMAM-capped perovskite NCs, which is a new record stability time against moisture for CH3NH3PbBr3 perovskite NCs. In addition, our results also indicate that PAMAM ligands outside perovskite NCs can dramatically slow down the speed of halide exchange. Even for the mixture of perovskite NCs with two different halide composition, the original luminescence properties of PAMAM-capped perovskite NCs can retain after mixing. In view of slow halide exchange speed, excellent water and moisture stability, PAMAM dendrimers-capped perovskite NCs and their mixture are available as color conversion single layer in fabrication of light-emitting diodes (LED).

Halocarbon emissions by selected tropical seaweeds: species-specific and compound-specific responses under changing pH.

PubMed

Mithoo-Singh, Paramjeet Kaur; Keng, Fiona S-L; Phang, Siew-Moi; Leedham Elvidge, Emma C; Sturges, William T; Malin, Gill; Abd Rahman, Noorsaadah

2017-01-01

Five tropical seaweeds, Kappaphycus alvarezii (Doty) Doty ex P.C. Silva, Padina australis Hauck, Sargassum binderi Sonder ex J. Agardh (syn. S. aquifolium (Turner) C. Agardh), Sargassum siliquosum J. Agardh and Turbinaria conoides (J. Agardh) Kützing, were incubated in seawater of pH 8.0, 7.8 (ambient), 7.6, 7.4 and 7.2, to study the effects of changing seawater pH on halocarbon emissions. Eight halocarbon species known to be emitted by seaweeds were investigated: bromoform (CHBr 3 ), dibro-momethane (CH 2 Br 2 ), iodomethane (CH 3 I), diiodomethane (CH 2 I 2 ), bromoiodomethane (CH 2 BrI), bromochlorometh-ane (CH 2 BrCl), bromodichloromethane (CHBrCl 2 ), and dibro-mochloromethane (CHBr 2 Cl). These very short-lived halocarbon gases are believed to contribute to stratospheric halogen concentrations if released in the tropics. It was observed that the seaweeds emit all eight halocarbons assayed, with the exception of K. alvarezii and S. binderi for CH 2 I 2 and CH 3 I respectively, which were not measurable at the achievable limit of detection. The effect of pH on halocarbon emission by the seaweeds was shown to be species-specific and compound specific. The highest percentage changes in emissions for the halocarbons of interest were observed at the lower pH levels of 7.2 and 7.4 especially in Padina australis and Sargassum spp., showing that lower seawater pH causes elevated emissions of some halocarbon compounds. In general the seaweed least affected by pH change in terms of types of halocarbon emission, was P. australis . The commercially farmed seaweed K. alvarezii was very sensitive to pH change as shown by the high increases in most of the compounds in all pH levels relative to ambient. In terms of percentage decrease in maximum quantum yield of photosynthesis ( F v ∕ F m ) prior to and after incubation, there were no significant correlations with the various pH levels tested for all seaweeds. The correlation between percentage decrease in the maximum quantum yield of photosynthesis ( F v ∕ F m ) and halocarbon emission rates, was significant only for CH 2 BrCl emission by P. australis ( r  = 0.47; p  ≤ 0.04), implying that photosynthesis may not be closely linked to halocarbon emissions by the seaweeds studied. Bromine was the largest contributor to the total mass of halogen emitted for all the seaweeds at all pH. The highest total amount of bromine emitted by K. alvarezii (an average of 98% of total mass of halogens) and the increase in the total amount of chlorine with decreasing seawater pH fuels concern for the expanding seaweed farming activities in the ASEAN region.

Halocarbon emissions by selected tropical seaweeds: species-specific and compound-specific responses under changing pH

PubMed Central

Leedham Elvidge, Emma C.; Sturges, William T.; Malin, Gill; Abd Rahman, Noorsaadah

2017-01-01

Five tropical seaweeds, Kappaphycus alvarezii (Doty) Doty ex P.C. Silva, Padina australis Hauck, Sargassum binderi Sonder ex J. Agardh (syn. S. aquifolium (Turner) C. Agardh), Sargassum siliquosum J. Agardh and Turbinaria conoides (J. Agardh) Kützing, were incubated in seawater of pH 8.0, 7.8 (ambient), 7.6, 7.4 and 7.2, to study the effects of changing seawater pH on halocarbon emissions. Eight halocarbon species known to be emitted by seaweeds were investigated: bromoform (CHBr3), dibro­momethane (CH2Br2), iodomethane (CH3I), diiodomethane (CH2I2), bromoiodomethane (CH2BrI), bromochlorometh­ane (CH2BrCl), bromodichloromethane (CHBrCl2), and dibro­mochloromethane (CHBr2Cl). These very short-lived halocarbon gases are believed to contribute to stratospheric halogen concentrations if released in the tropics. It was observed that the seaweeds emit all eight halocarbons assayed, with the exception of K. alvarezii and S. binderi for CH2I2 and CH3I respectively, which were not measurable at the achievable limit of detection. The effect of pH on halocarbon emission by the seaweeds was shown to be species-specific and compound specific. The highest percentage changes in emissions for the halocarbons of interest were observed at the lower pH levels of 7.2 and 7.4 especially in Padina australis and Sargassum spp., showing that lower seawater pH causes elevated emissions of some halocarbon compounds. In general the seaweed least affected by pH change in terms of types of halocarbon emission, was P. australis. The commercially farmed seaweed K. alvarezii was very sensitive to pH change as shown by the high increases in most of the compounds in all pH levels relative to ambient. In terms of percentage decrease in maximum quantum yield of photosynthesis (Fv∕Fm) prior to and after incubation, there were no significant correlations with the various pH levels tested for all seaweeds. The correlation between percentage decrease in the maximum quantum yield of photosynthesis (Fv∕Fm) and halocarbon emission rates, was significant only for CH2BrCl emission by P. australis (r = 0.47; p ≤ 0.04), implying that photosynthesis may not be closely linked to halocarbon emissions by the seaweeds studied. Bromine was the largest contributor to the total mass of halogen emitted for all the seaweeds at all pH. The highest total amount of bromine emitted by K. alvarezii (an average of 98% of total mass of halogens) and the increase in the total amount of chlorine with decreasing seawater pH fuels concern for the expanding seaweed farming activities in the ASEAN region. PMID:28149690

Syntheses and structure characterization of ten acid-base hybrid crystals based on N-containing aromatic brønsted bases and mineral acids

NASA Astrophysics Data System (ADS)

Lin, Zhihao; Jin, Shouwen; Li, Xiaoliang; Xiao, Xiao; Hu, Kaikai; Guo, Ming; Chi, Xinchen; Liu, Hui; Wang, Daqi

2017-10-01

Cocrystallization of the aromatic brønsted bases with a series of mineral acids gave a total of ten hybrid salts with the compositions: (2-methylquinoline)2: (hydrochloride acid): 3H2O [(HL1)+. (L1)·· (Cl-) · (H2O)3] (1), (6-bromobenzo[d]thiazol-2-amine): (hydrochloride acid) [(HL2)+. (Cl-)] (2), (6-bromobenzo[d]thiazol-2-amine): (nitric acid) [(HL2)+. (NO3-)] (3), (6-bromobenzo[d]thiazol-2-amine): (sulfuric acid) [(HL2)+ · (HSO4)-] (4), (6-bromobenzo[d]thiazol-2-amine): (phosphoric acid) [(HL2)+ · (H2PO4)-] (5), (5,7-dimethyl-1,8-naphthyridine-2-amine): (hydrochloride acid): 3H2O [(HL3)+ · (Cl-) (H2O)3] (6), (5,7-dimethyl-1,8-naphthyridine-2-amine): (hydrobromic acid): CH3OH [(HL3)+ · (Br)- · CH3OH] (7), (5,7-dimethyl-1,8-naphthyridine-2-amine): (sulfuric acid): H2O [(HL3)+ · (HSO4)- · H2O] (8), (2-aminophenol): (phosphoric acid) [(HL4)+ · (H2PO4)-] (9), and (2-amino-4-chlorophenol): (phosphoric acid) [(HL5)+ · (H2PO4)-] (10). The ten salts have been characterized by X-ray diffraction analysis, IR, and elemental analysis, and the melting points of all the salts were also reported. And their structural and supramolecular aspects are fully analyzed. The result reveals that among the ten investigated crystals the ring N of the heterocycle or the NH2 in the aminophenol are protonated when the acids are deprotonated, and the crystal packing is interpreted in terms of the strong charge-assisted classical hydrogen bonds between the NH+/NH3+ and deprotonated acidic groups. Further analysis of the crystal packing of the salts indicated that a different family of additional CHsbnd O, CHsbnd Cl, CH3sbnd N, CH3sbnd O, CHsbnd Br, CH3sbnd Br, Brsbnd Cl, Clsbnd S, Osbnd S, Osbnd O, Brsbnd S, Hsbnd H, and π-π associations contribute to the stabilization and expansion of the total high-dimensional frameworks. For the coexistence of the various weak nonbonding interactions these structures adopted homo or hetero supramolecular synthons or both. Some classical supramolecular synthons, such as R22(8), R42(8), R43(10) and R44(12), usually observed in the organic solids, were again shown to be involved in constructing most of these H-bonding networks.

Concerns for Ozone Recovery

NASA Technical Reports Server (NTRS)

Liang, Qing; Strahan, Susan E.; Fleming, Eric L.

2017-01-01

Reactive halogen gases containing chlorine (Cl) or bromine (Br) can destroy stratospheric ozone via catalytic cycles. The main sources of atmospheric reactive halogen are the long-lived synthetic chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), carbon tetrachloride (CCl4), methyl chloroform (CH3CCl3), and bromine-containing halons, all of which persist in the atmosphere for years. These ozone-depleting substances are now controlled under the Montreal Protocol and its amendments. Natural methyl bromide (CH3Br) and methyl chloride (CH3Cl) emissions are also important long-lived sources of atmospheric reactive halogen. Rising concentrations of very-short-lived substances (VSLSs) with atmospheric lifetimes of less than half a year may also contribute to future stratospheric ozone depletion. A greater concern for ozone layer recovery is incomplete compliance with the Montreal Protocol, which will impact stratospheric ozone for many decades, as well as rising natural emissions as a result of climate change.

Surfactant-Modified Ultrafine Gold Nanoparticles with Magnetic Responsiveness for Reversible Convergence and Release of Biomacromolecules.

PubMed

Xu, Lu; Dong, Shuli; Hao, Jingcheng; Cui, Jiwei; Hoffmann, Heinz

2017-03-28

It is difficult to synthesize magnetic gold nanoparticles (AuNPs) with ultrafine sizes (<2 nm) based on a conventional method via coating AuNPs using magnetic particles, compounds, or ions. Here, magnetic cationic surfactants C 16 H 33 N + (CH 3 ) 3 [CeCl 3 Br] - (CTACe) and C 16 H 33 N + (CH 3 ) 3 [GdCl 3 Br] - (CTAGd) are prepared by a one-step coordination reaction, i.e., C 16 H 33 N + (CH 3 ) 3 Br - (CTABr) + CeCl 3 or GdCl 3 → CTACe or CTAGd. A simple strategy for fabricate ultrafine (<2 nm) magnetic gold nanoparticles (AuNPs) via surface modification with weak oxidizing paramagnetic cationic surfactants, CTACe or CTAGd, is developed. The resulting AuNPs can highly concentrate the charges of cationic surfactants on their surfaces, thereby presenting strong electrostatic interaction with negatively charged biomacromolecules, DNA, and proteins. As a consequence, they can converge DNA and proteins over 90% at a lower dosage than magnetic surfactants or existing magnetic AuNPs. The surface modification with these cationic surfactants endows AuNPs with strong magnetism, which allows them to magnetize and migrate the attached biomacromolecules with a much higher efficiency. The native conformation of DNA and proteins can be protected during the migration. Besides, the captured DNA and proteins could be released after adding sufficient inorganic salts such as at c NaBr = 50 mmol·L -1 . Our results could offer new guidance for a diverse range of systems including gene delivery, DNA transfection, and protein delivery and separation.

Coupled cluster investigation on the thermochemistry of dimethyl sulphide, dimethyl disulphide and their dissociation products: the problem of the enthalpy of formation of atomic sulphur

NASA Astrophysics Data System (ADS)

Denis, Pablo A.

2014-04-01

By means of coupled cluster theory and correlation consistent basis sets we investigated the thermochemistry of dimethyl sulphide (DMS), dimethyl disulphide (DMDS) and four closely related sulphur-containing molecules: CH3SS, CH3S, CH3SH and CH3CH2SH. For the four closed-shell molecules studied, their enthalpies of formation (EOFs) were derived using bomb calorimetry. We found that the deviation of the EOF with respect to experiment was 0.96, 0.65, 1.24 and 1.29 kcal/mol, for CH3SH, CH3CH2SH, DMS and DMDS, respectively, when ΔHf,0 = 65.6 kcal/mol was utilised (JANAF value). However, if the recently proposed ΔHf,0 = 66.2 kcal/mol was used to estimate EOF, the errors dropped to 0.36, 0.05, 0.64 and 0.09 kcal/mol, respectively. In contrast, for the CH3SS radical, a better agreement with experiment was obtained if the 65.6 kcal/mol value was used. To compare with experiment avoiding the problem of the ΔHf,0 (S), we determined the CH3-S and CH3-SS bond dissociation energies (BDEs) in CH3S and CH3SS. At the coupled cluster with singles doubles and perturbative triples correction level of theory, these values are 48.0 and 71.4 kcal/mol, respectively. The latter BDEs are 1.5 and 1.2 kcal/mol larger than the experimental values. The agreement can be considered to be acceptable if we take into consideration that these two radicals present important challenges when determining their EOFs. It is our hope that this work stimulates new studies which help elucidate the problem of the EOF of atomic sulphur.

Low-frequency collective dynamics in deep eutectic solvents of acetamide and electrolytes: a femtosecond Raman-induced Kerr effect spectroscopic study.

PubMed

Biswas, Ranjit; Das, Anuradha; Shirota, Hideaki

2014-10-07

In this study, we have investigated the ion concentration dependent collective dynamics in two series of deep eutectic solvent (DES) systems by femtosecond Raman-induced Kerr effect spectroscopy, as well as some physical properties, e.g., shear viscosity (η), density (ρ), and surface tension (γ). The DES systems studied here are [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] and [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] with f = 0, 0.2, 0.4, 0.6, 0.8, and 1.0. γ of these DES systems shows near insensitivity to f, while ρ shows a moderate dependence on f. Interestingly, η exhibits a strong dependence on f. In the low-frequency Kerr spectra, obtained via the Fourier transform of the collected Kerr transients, a characteristic band at ∼70 cm(-1) is clear in [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] DES especially at the larger f. The band is attributed to the intermolecular hydrogen bond of acetamide. Because of less depolarized Raman activities of intermolecular/interionic vibrational motions, which are mostly translational (collision-induced or interaction-induced) motions, of spherical ions, the intermolecular hydrogen-bonding band is clearly observed. In contrast, the intermolecular hydrogen-bonding band is buried in the other intermolecular/interionic vibrational motions, which includes translational and reorientational (librational) motions and their cross-terms, in [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] system. The first moment (M1) of the intermolecular/interionic vibrational band in these DES systems is much higher than that in typical neutral molecular liquids and shows a weak but contrasting dependence on the bulk parameter √γ/ρ. The time constants for picosecond overdamped Kerr transients in both the DES systems, which are obtained on the basis of the analysis fitted by a triexponential function, are rather insensitive to f for both the DES systems, but all the three time constants (fast: ∼1-3 ps; intermediate: ∼7-20 ps; and slow: ∼100 ps) are different between the [0.78CH3CONH2 + 0.22{f LiBr + (1 - f )LiNO3}] and [0.75CH3CONH2 + 0.25{f KSCN + (1 - f )NaSCN}] systems. These results indicate that the intermolecular/interionic interactions in DES systems is strongly influenced by the ionic species present in these DES systems.

Density Functional Investigation of the Inclusion of Gold Clusters on a CH 3 S Self-Assembled Lattice on Au(111)

DOE PAGES

Allen, Darnel J.; Archibald, Wayne E.; Harper, John A.; ...

2016-01-01

We employ first-principles density functional theoretical calculations to address the inclusion of gold (Au) clusters in a well-packed CH 3 S self-assembled lattice. We compute CH 3 S adsorption energies to quantify the energetic stability of the self-assembly and gold adsorption and dissolution energies to characterize the structural stability of a series of Au clusters adsorbed at the SAM-Au interface. Our results indicate that the inclusion of Au clusters with less than four Au atoms in the SAM-Au interface enhances the binding of CH 3 S species. In contrast, larger Au clusters destabilize the self-assembly. We attribute this effect tomore » the low-coordinated gold atoms in the cluster. For small clusters, these low-coordinated sites have significantly different electronic properties compared to larger islands, which makes the binding with the self-assembly energetically more favorable. Our results further indicate that Au clusters in the SAM-Au interface are thermodynamically unstable and they will tend to dissolve, producing Au adatoms incorporated in the self-assembly in the form of CH 3 S-Au-SCH 3 species. This is due to the strong S-Au bond which stabilizes single Au adatoms in the self-assembly. Our results provide solid insight into the impact of adatom islands at the CH 3 S-Au interface.« less

What is the best bonding model of the (σ-H-BR) species bound to a transition metal? Bonding analysis in complexes [(H)2Cl(PMe3)2M(σ-H-BR)] (M = Fe, Ru, Os).

PubMed

Pandey, Krishna K

2012-03-21

Density Functional Theory calculations have been performed for the σ-hydroboryl complexes of iron, ruthenium and osmium [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] (M = Fe, Ru, Os; R = OMe, NMe(2), Ph) at the BP86/TZ2P/ZORA level of theory in order to understand the interactions between metal and HBR ligands. The calculated geometries of the complexes [(H)(2)Cl(PMe(3))(2)Ru(HBNMe(2))], [(H)(2)Cl(PMe(3))(2)Os(HBR)] (R = OMe, NMe(2)) are in excellent agreement with structurally characterized complexes [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))], [(H)(2)Cl(P(i)Pr(3))(2)Os{σ-H-BOCH(2)CH(2)OB(O(2)CH(2)CH(2))}] and [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))]. The longer calculated M-B bond distance in complex [(H)(2)Cl(PMe(3))(2)M(σ-H-BNMe(2))] are due to greater B-N π bonding and as a result, a weaker M-B π-back-bonding. The B-H2 bond distances reveal that (i) iron complexes contain bis(σ-borane) ligand, (ii) ruthenium complexes contain (σ-H-BR) ligands with a stretched B-H2 bond, and (iii) osmium complexes contain hydride (H2) and (σ-H-BR) ligands. The H-BR ligands in osmium complexes are a better trans-directing ligand than the Cl ligand. Values of interaction energy, electrostatic interaction, orbital interaction, and bond dissociation energy for interactions between ionic fragments are very large and may not be consistent with M-(σ-H-BR) bonding. The EDA as well as NBO and AIM analysis suggest that the best bonding model for the M-σ-H-BR interactions in the complexes [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] is the interaction between neutral fragments [(H)(2)Cl(PMe(3))(2)M] and [σ-H-BR]. This becomes evident from the calculated values for the orbital interactions. The electron configuration of the fragments which is shown for C in Fig. 1 experiences the smallest change upon the M-σ-H-BR bond formation. Since model C also requires the least amount of electronic excitation and geometry changes of all models given by the ΔE(prep) values, it is clearly the most appropriate choice of interacting fragments. The π-bonding contribution is 14-22% of the total orbital contribution.

Shape Evolution and Single Particle Luminescence of Organometal Halide Perovskite Nanocrystals

DOE PAGES

Zhu, Feng; Men, Long; Guo, Yijun; ...

2015-02-09

Organometallic halide perovskites CH 3NH 3PbX 3 (X = I, Br, Cl) have quickly become one of the most promising semiconductors for solar cells, with photovoltaics made of these materials reaching power conversion efficiencies of near 20%. Improving our ability to harness the full potential of organometal halide perovskites will require more controllable syntheses that permit a detailed understanding of their fundamental chemistry and photophysics. In our manuscript, we systematically synthesize CH 3NH 3PbX 3 (X = I, Br) nanocrystals with different morphologies (dots, rods, plates or sheets) by using different solvents and capping ligands. CH 3NH 3PbX 3 nanowiresmore » and nanorods capped with octylammonium halides show relatively higher photoluminescence (PL) quantum yields and long PL lifetimes. CH 3NH 3PbI 3 nanowires monitored at the single particle level show shape-correlated PL emission across whole particles, with little photobleaching observed and very few off periods. Our work highlights the potential of low-dimensional organometal halide perovskite semiconductors in constructing new porous and nanostructured solar cell architectures, as well as in applying these materials to other fields such as light-emitting devices and single particle imaging and tracking.« less

Reaction of the Mo3S4 cluster with dimethylacetylenedicarboxylate: an ESR-active cluster and an organometallic cluster formed by alpha,beta-conjugate addition.

PubMed

Ide, Yasuhiro; Shibahara, Takashi

2007-01-22

A seven-electron cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)] [2, S2P(OC(2)H(5))2-; dtp = diethyldithiophosphate] and an organometallic cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))CH(OCH(3))(CO2)}(dtp)2(CH(3)OH)(mu-OAc)](Mo-C) (3) were obtained by reaction in methanol of the sulfur-bridged trinuclear complex [Mo3(mu3-S)(mu-S)3(dtp)3(CH(3)CN)(mu-OAc)] (1) with dimethylacetylenedicarboxylate (DMAD). The X-ray structures of 2 and 3 revealed the adduct formation of two DMAD molecules to the respective Mo(3)S(4) cores. 2 is paramagnetic and obeys the Curie-Weiss law: the mu(eff) value at 300 K is 1.90 muB. The electron spin resonance signal was observed at 173 K. The density functional theory calculation of 2 demonstrated that the main components of the singly occupied molecular orbitals of alpha and beta spins are Mo d electrons and the main components of lowest unoccupied molecular orbitals are of Mo and the olefin moiety with one C-S bond. A one-electron reversible oxidation process of 2 was observed at E1/2 = -0.11 V vs Fc/Fc+. The electronic spectrum of 2 has a peak at 468 nm (epsilon = 2170 M(-1) cm(-1)) and shoulders at 640 (918) and 797 (605) nm, and 3 has shoulders at 441 (1740) and 578 (625) nm and a distinct peak at 840 (467) nm. An intermediate [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)]+ (4) is tentatively suggested: a one-electron reduction of 4 gives 2, and a nucleophilic conjugate addition of CH(3)O- to the alpha,beta-unsaturated carbonyl group of 4 gives 3.

Real-time observation of formation and relaxation dynamics of NH4 in (CH3OH)m(NH3)n clusters.

PubMed

Yamada, Yuji; Nishino, Yoko; Fujihara, Akimasa; Ishikawa, Haruki; Fuke, Kiyokazu

2009-03-26

The formation and relaxation dynamics of NH4(CH3OH)m(NH3)n clusters produced by photolysis of ammonia-methanol mixed clusters has been observed by a time-resolved pump-probe method with femtosecond pulse lasers. From the detailed analysis of the time evolutions of the protonated cluster ions, NH4(+)(CH3OH)m(NH3)n, the kinetic model has been constructed, which consists of sequential three-step reaction: ultrafast hydrogen-atom transfer producing the radical pair (NH4-NH2)*, the relaxation process of radical-pair clusters, and dissociation of the solvated NH4 clusters. The initial hydrogen transfer hardly occurs between ammonia and methanol, implying the unfavorable formation of radical pair, (CH3OH2-NH2)*. The remarkable dependence of the time constants in each step on the number and composition of solvents has been explained by the following factors: hydrogen delocalization within the clusters, the internal conversion of the excited-state radical pair, and the stabilization of NH4 by solvation. The dependence of the time profiles on the probe wavelength is attributed to the different ionization efficiency of the NH4(CH3OH)m(NH3)n clusters.

Third-order nonlinear optical properties of methylammonium lead halide perovskite films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Justin C.; Li, Zhen; Ndione, Paul F.

2016-01-01

We report third-order nonlinear coefficient values and decay time kinetics vs. halide composition (CH3NH3PbBr3 and CH3NH3PbBr2I), temperature, and excitation wavelength. The maximum values of the third-order nonlinear susceptibility X(3) (-1.6 x 10-6 esu) are similar to or larger than many common third-order materials. The source of the nonlinearity is shown to be primarily excitonic in the tribromide film by virtue of its strong enhancement near the exciton resonance. Nonresonant excitation reduces the nonlinearity significantly, as does increasing the temperature. Substitution of one I for one Br also reduces the nonlinearity by at least one order of magnitude, presumably due tomore » the lack of strong exciton resonance in the substituted form. The thin films are stable, highly homogenous (lacking significant light scattering), and simple and inexpensive to fabricate, making them potentially useful in a variety of optoelectronic applications in which wavelength selectivity is important.« less

Syntheses and structure characterization of ten acid-base hybrid crystals based on imidazole derivatives and mineral acids

NASA Astrophysics Data System (ADS)

Hu, Kaikai; Deng, Bowen; Jin, Shouwen; Ding, Aihua; Jin, Shide; Zhu, Jin; Zhang, Huan; Wang, Daqi

2018-04-01

Cocrystallization of the imidazole derivatives with a series of mineral acids gave a total of ten hybrid salts with the compositions: [(H2bzm)(Cl)2·3H2O] (1), [(H2bzm)(ClO4)2] (2), [(H2bze)(Cl)2·2H2O] (3), [(H2bze)(Br)2·2H2O] (4), [(H2bzp)(Cl)2·4H2O] (5), [(H2bzp)(Br)2·4H2O] (6), (2-(imidazol-1-yl)-1-phenylethanone): (phosphoric acid) [(Himpeta)+(H2PO4)-] (7), [(H2impd)(Br)2] (8), [(H2impd)(ClO4)2] (9), and [(Hbzml)(Cl)] (10). The ten salts have been characterised by X-ray diffraction analysis, IR, and elemental analysis, and the melting points of all the salts were also reported. And their structural and supramolecular aspects are fully analyzed. The result reveals that among the ten investigated crystals the ring N atoms of the imidazole are protonated when the acids are deprotonated, and the crystal packing is interpreted in terms of the strong charge-assisted classical H-bonds between the NH+ and deprotonated acidic groups. Further analysis of the crystal packing of the salts indicated that a different set of additional CHsbnd O, CH2sbnd O, CHsbnd Cl, CH2sbnd Cl, CHsbnd N, CHsbnd Br, CH2sbnd Br, Osbnd O, O-π, Br-π, CH-π, and π-π associations contribute to the stabilization and expansion of the total high-dimensional frameworks. For the coexistence of the various weak nonbonding interactions these structures adopted homo or hetero supramolecular synthons or both. Some classical supramolecular synthons, such as R21(7), R22(7), R22(8), and R42(8), usually observed in the organic solids, were again shown to be involved in constructing some of these H-bonding networks.

Electronic Properties of Free-Standing Surfactant-Capped Lead Halide Perovskite Nanocrystals Isolated in Vacuo.

PubMed

Milosavljevic, Aleksandar R; Bozanic, Dusan; Sadhu, Subha; Vukmirovic, Nenad; Dojcilovic, Radovan; Sapkota, Pitambar; Huang, Weixin; Bozek, John D; Nicolas, Christophe; Nahon, Laurent; Ptasinska, Sylwia

2018-06-14

We report an investigation of lead halide perovskite CH3NH3PbBr3 nanocrystals and associated ligand molecules, by combining several different state-of-the-art experimental techniques, including synchrotron radiation based XPS and VUV PES of free-standing nanocrystals isolated in vacuum. By using this novel approach for perovskite materials we could directly obtain a complete band alignment to vacuum of both CH3NH3PbBr3 nanocrystals and the ligands widely used in their preparation. We discuss possible influence of the ligand molecules to apparent perovskite properties, and we compare the electronic properties of nanocrystals to that of bulk material. The experimental results were supported by DFT calculations.

Rapid Consumption of Low Concentrations of Methyl Bromide by Soil Bacteria

PubMed Central

Hines, Mark E.; Crill, Patrick M.; Varner, Ruth K.; Talbot, Robert W.; Shorter, Joanne H.; Kolb, Charles E.; Harriss, Robert C.

1998-01-01

A dynamic dilution system for producing low mixing ratios of methyl bromide (MeBr) and a sensitive analytical technique were used to study the uptake of MeBr by various soils. MeBr was removed within minutes from vials incubated with soils and ∼10 parts per billion by volume of MeBr. Killed controls did not consume MeBr, and a mixture of the broad-spectrum antibiotics chloramphenicol and tetracycline inhibited MeBr uptake by 98%, indicating that all of the uptake of MeBr was biological and by bacteria. Temperature optima for MeBr uptake suggested a biological sink, yet soil moisture and temperature optima varied for different soils, implying that MeBr consumption activity by soil bacteria is diverse. The eucaryotic antibiotic cycloheximide had no effect on MeBr uptake, indicating that soil fungi were not involved in MeBr removal. MeBr consumption did not occur anaerobically. A dynamic flowthrough vial system was used to incubate soils at MeBr mixing ratios as low as those found in the remote atmosphere (5 to 15 parts per trillion by volume [pptv]). Soils consumed MeBr at all mixing ratios tested. Temperate forest and grassy lawn soils consumed MeBr most rapidly (rate constant [k] = 0.5 min−1), yet sandy temperate, boreal, and tropical forest soils also readily consumed MeBr. Amendments of CH4 up to 5% had no effect on MeBr uptake even at CH4:MeBr ratios of 107, and depth profiles of MeBr and CH4 consumption exhibited very different vertical rate optima, suggesting that methanotrophic bacteria, like those presently in culture, do not utilize MeBr when it is at atmospheric mixing ratios. Data acquired with gas flux chambers in the field demonstrated the very rapid in situ consumption of MeBr by soils. Uptake of MeBr at mixing ratios found in the remote atmosphere occurs via aerobic bacterial activity, displays first-order kinetics at mixing ratios from 5 pptv to ∼1 part per million per volume, and is rapid enough to account for 25% of the global annual loss of atmospheric MeBr. PMID:9572964

Ultrafast photochemistry of methyl hydroperoxide on ice particles

PubMed Central

Kamboures, M. A.; Nizkorodov, S. A.; Gerber, R. B.

2009-01-01

Simulations show that photodissociation of methyl hydroperoxide, CH3OOH, on water clusters produces a surprisingly wide range of products on a subpicosecond time scale, pointing to the possibility of complex photodegradation pathways for organic peroxides on aerosols and water droplets. Dynamics are computed at several excitation energies at 50 K using a semiempirical PM3 potential surface. CH3OOH is found to prefer the exterior of the cluster, with the CH3O group sticking out and the OH group immersed within the cluster. At atmospherically relevant photodissociation wavelengths the OH and CH3O photofragments remain at the surface of the cluster or embedded within it. However, none of the 25 completed trajectories carried out at the atmospherically relevant photodissociation energies led to recombination of OH and CH3O to form CH3OOH. Within the limited statistics of the available trajectories the predicted yield for the recombination is zero. Instead, various reactions involving the initial fragments and water promptly form a wide range of stable molecular products such as CH2O, H2O, H2, CO, CH3OH, and H2O2. PMID:19846778

Facile synthesis of CsPbBr3/PbSe composite clusters

PubMed Central

Nguyen, Thang Phan; Ozturk, Abdullah; Park, Jongee; Sohn, Woonbae; Lee, Tae Hyung; Jang, Ho Won; Kim, Soo Young

2018-01-01

Abstract In this work, CsPbBr3 and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr3 quantum dots modified the electronic structure of CsPbBr3, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr3 perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr3 quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr3/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr3/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr3 reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr3 quantum dots. PMID:29296127

Further Analysis of Boiling Points of Small Molecules, CH[subscript w]F[subscript x]Cl[subscript y]Br[subscript z

ERIC Educational Resources Information Center

Beauchamp, Guy

2005-01-01

A study to present specific hypothesis that satisfactorily explain the boiling point of a number of molecules, CH[subscript w]F[subscript x]Cl[subscript y]Br[subscript z] having similar structure, and then analyze the model with the help of multiple linear regression (MLR), a data analysis tool. The MLR analysis was useful in selecting the…

Infrared spectroscopy of solid normal hydrogen doped with CH3F and O2 at 4.2 K: CH3F:O2 complex and CH3F migration

NASA Astrophysics Data System (ADS)

Abouaf-Marguin, L.; Vasserot, A.-M.

2011-04-01

Double doping of solid normal hydrogen with CH3F and O2 at about 4.2 K gives evidence of (ortho-H2)n:CH3F clusters and of O2:CH3F complex formation. FTIR analysis of the time evolution of the spectra in the region of the v3 C-F stretching mode indicates that these clusters behave very differently from (ortho-H2)n:H2O clusters. The main point is the observed migration of CH3F molecules in solid para-H2 at 4.2 K which differs from that of H2O under identical experimental conditions. This is confirmed by an increase over time of the integrated intensity of the CH3F:O2 complex with a rate constant K = 2.7(2) . 10-4 s-1.

Surface Plasmon Resonance Effect in Inverted Perovskite Solar Cells.

PubMed

Cui, Jin; Chen, Cheng; Han, Junbo; Cao, Kun; Zhang, Wenjun; Shen, Yan; Wang, Mingkui

2016-03-01

This work reports on incorporation of spectrally tuned gold/silica (Au/SiO 2 ) core/shell nanospheres and nanorods into the inverted perovskite solar cells (PVSC). The band gap of hybrid lead halide iodide (CH 3 NH 3 PbI 3 ) can be gradually increased by replacing iodide with increasing amounts of bromide, which can not only offer an appreciate solar radiation window for the surface plasmon resonance effect utilization, but also potentially result in a large open circuit voltage. The introduction of localized surface plasmons in CH 3 NH 3 PbI 2.85 Br 0.15 -based photovoltaic system, which occur in response to electromagnetic radiation, has shown dramatic enhancement of exciton dissociation. The synchronized improvement in photovoltage and photocurrent leads to an inverted CH 3 NH 3 PbI 2.85 Br 0.15 planar PVSC device with power conversion efficiency of 13.7%. The spectral response characterization, time resolved photoluminescence, and transient photovoltage decay measurements highlight the efficient and simple method for perovskite devices.

Effect of solvent on the electronic absorption spectral properties of some mixed β-octasubstituted Zn(II)-tetraphenylporphyrins

NASA Astrophysics Data System (ADS)

Bhyrappa, P.; Sankar, M.

2018-01-01

A series of mixed β-octasubstituted Zn(II)-porphyrins, 2,3,12,13-tetra(chloro/cyano/methyl)-5,7,8,10,15,17,18,20-octaphenylporphinato zinc(II), ZnTPP(Ph)4X4 (X = CN, Cl and CH3) have been examined by electronic absorption spectroscopy in various solvents. These Zn(II)-porphyrins exhibited varying degree of red-shift of absorption bands as high as 20-30 nm in 'B' band and 50-60 nm in longest wavelength band, 'Q(0,0)' band in polar solvents relative to that found in nonpolar solvents. The red-shift of B and Q(0,0) bands showed an unusual trend, ZnTPP(Ph)4(CN)4 > ZnTPP(Ph)4(CH3)4 > ZnTPP(Ph)4Cl4 but fails to follow an anticipated anodic shift in first porphyrin ring oxidation (vs Ag/AgCl) potential: ZnTPP(Ph)4(CN)4 (1.02 V) > ZnTPP(Ph)4Cl4 (0.74 V) > ZnTPP(Ph)4(CH3)4 (0.38 V). Such a trend suggests the combined effect of non-planarity of the macrocycle and electronic effect of the peripheral substituents. The equilibrium constants for the binding of nitrogenous bases with the Zn(II)-porphyrins showed as high as twenty fold increase for ZnTPP(Ph)4X4 (X = Br and CN) relative to ZnTPP(Ph)4(CH3)4 and follow the order: ZnTPP(Ph)4(CN)4 > ZnTPP(Ph)4Br4 > ZnTPP(Ph)4(CH3)4 ≤ ZnTPP which is approximately in line with an increase in anodic shift of their first ring redox potentials (ZnTPP(Ph)4(CN)4 (1.02 V) > ZnTPP(Ph)4Br4 (0.72 V) > ZnTPP (0.84 V) > ZnTPP(Ph)4(CH3)4) (0.38 V).

N-Boc amines to oxazolidinones via Pd(II)/bis-sulfoxide/Brønsted acid co-catalyzed allylic C-H oxidation.

PubMed

Osberger, Thomas J; White, M Christina

2014-08-06

A Pd(II)/bis-sulfoxide/Brønsted acid catalyzed allylic C-H oxidation reaction for the synthesis of oxazolidinones from simple N-Boc amines is reported. A range of oxazolidinones are furnished in good yields (avg 63%) and excellent diastereoselectivities (avg 15:1) to furnish products regioisomeric from those previously obtained using allylic C-H amination reactions. Mechanistic studies suggest the role of the phosphoric acid is to furnish a Pd(II)bis-sulfoxide phosphate catalyst that promotes allylic C-H cleavage and π-allylPd functionalization with a weak, aprotic oxygen nucleophile and to assist in catalyst regeneration.

Kinetics of the reactions of alkyl radicals with HBr and DBr

NASA Technical Reports Server (NTRS)

Nicovich, J. M.; Van Dijk, C. A.; Kreutter, K. D.; Wine, P. H.

1991-01-01

The kinetics of the reactions CH3 + HBr, CD3 + HBr, CH3 + DBr, C2H5 + HBr, C2H5 + DBr, t-C4H9 + HBr, and t-C4H9 + DBr is studied as a function of temperature (257-430 K) and pressure (10-300 Torr of N2). Time-resolved resonance fluorescence detection of Br atom appearance following laser flash photolysis of RI was used in the experiments. Results show that the rates of all reactions increased as the temperature decreased.

Reactivity of Hydride Bridges in High-Spin [3M-3(μ-H)] Clusters (M = FeII, CoII).

PubMed

Lee, Yousoon; Anderton, Kevin J; Sloane, Forrest T; Ermert, David M; Abboud, Khalil A; García-Serres, Ricardo; Murray, Leslie J

2015-08-26

The designed [3M-3(μ-H)] clusters (M = Fe(II), Co(II)) Fe3H3L (1-H) and Co3H3L (2-H) [where L(3-) is a tris(β-diketiminate) cyclophane] were synthesized by treating the corresponding M3Br3L complexes with KBEt3H. From single-crystal X-ray analysis, the hydride ligands are sterically protected by the cyclophane ligand, and these complexes selectively react with CO2 over other unsaturated substrates (e.g., CS2, Me3SiCCH, C2H2, and CH3CN). The reaction of 1-H or 2-H with CO2 at room temperature yielded Fe3(OCHO)(H)2L (1-CO2) or Co3(OCHO)(H)2L (2-CO2), respectively, which evidence the differential reactivity of the hydride ligands within these complexes. The analogous reactions at elevated temperatures revealed a distinct difference in the reactivity pattern for 2-H as compared to 1-H; Fe3(OCHO)3L (1-3CO2) was generated from 1-H, while 2-H afforded only 2-CO2.

Probing the subtropical lowermost stratosphere and the tropical upper troposphere and tropopause layer for inorganic bromine

NASA Astrophysics Data System (ADS)

Werner, Bodo; Stutz, Jochen; Spolaor, Max; Scalone, Lisa; Raecke, Rasmus; Festa, James; Fedele Colosimo, Santo; Cheung, Ross; Tsai, Catalina; Hossaini, Ryan; Chipperfield, Martyn P.; Taverna, Giorgio S.; Feng, Wuhu; Elkins, James W.; Fahey, David W.; Gao, Ru-Shan; Hintsa, Erik J.; Thornberry, Troy D.; Moore, Free Lee; Navarro, Maria A.; Atlas, Elliot; Daube, Bruce C.; Pittman, Jasna; Wofsy, Steve; Pfeilsticker, Klaus

2017-01-01

We report measurements of CH4 (measured in situ by the Harvard University Picarro Cavity Ringdown Spectrometer (HUPCRS) and NOAA Unmanned Aircraft System Chromatograph for Atmospheric Trace Species (UCATS) instruments), O3 (measured in situ by the NOAA dual-beam ultraviolet (UV) photometer), NO2, BrO (remotely detected by spectroscopic UV-visible (UV-vis) limb observations; see the companion paper of Stutz et al., 2016), and of some key brominated source gases in whole-air samples of the Global Hawk Whole Air Sampler (GWAS) instrument within the subtropical lowermost stratosphere (LS) and the tropical upper troposphere (UT) and tropopause layer (TTL). The measurements were performed within the framework of the NASA-ATTREX (National Aeronautics and Space Administration - Airborne Tropical Tropopause Experiment) project from aboard the Global Hawk (GH) during six deployments over the eastern Pacific in early 2013. These measurements are compared with TOMCAT/SLIMCAT (Toulouse Off-line Model of Chemistry And Transport/Single Layer Isentropic Model of Chemistry And Transport) 3-D model simulations, aiming at improvements of our understanding of the bromine budget and photochemistry in the LS, UT, and TTL.Changes in local O3 (and NO2 and BrO) due to transport processes are separated from photochemical processes in intercomparisons of measured and modeled CH4 and O3. After excellent agreement is achieved among measured and simulated CH4 and O3, measured and modeled [NO2] are found to closely agree with ≤ 15 ppt in the TTL (which is the detection limit) and within a typical range of 70 to 170 ppt in the subtropical LS during the daytime. Measured [BrO] ranges between 3 and 9 ppt in the subtropical LS. In the TTL, [BrO] reaches 0.5 ± 0.5 ppt at the bottom (150 hPa/355 K/14 km) and up to about 5 ppt at the top (70 hPa/425 K/18.5 km; see Fueglistaler et al., 2009 for the definition of the TTL used), in overall good agreement with the model simulations. Depending on the photochemical regime, the TOMCAT/SLIMCAT simulations tend to slightly underpredict measured BrO for large BrO concentrations, i.e., in the upper TTL and LS. The measured BrO and modeled BrO / Bryinorg ratio is further used to calculate inorganic bromine, Bryinorg. For the TTL (i.e., when [CH4] ≥ 1790 ppb), [Bryinorg] is found to increase from a mean of 2.63 ± 1.04 ppt for potential temperatures (θ) in the range of 350-360 K to 5.11 ± 1.57 ppt for θ = 390 - 400 K, whereas in the subtropical LS (i.e., when [CH4] ≤ 1790 ppb), it reaches 7.66 ± 2.95 ppt for θ in the range of 390-400 K. Finally, for the eastern Pacific (170-90° W), the TOMCAT/SLIMCAT simulations indicate a net loss of ozone of -0.3 ppbv day-1 at the base of the TTL (θ = 355 K) and a net production of +1.8 ppbv day-1 in the upper part (θ = 383 K).

First Evidence of Vibrationally Driven Bimolecular Reactions in Solution: Reactions of Br Atoms with Dimethylsulfoxide and Methanol.

PubMed

Shin, Jae Yoon; Shaloski, Michael A; Crim, F Fleming; Case, Amanda S

2017-03-23

We present evidence for vibrational enhancement of the rate of bimolecular reactions of Br atoms with dimethylsulfoxide (DMSO) and methanol (CH 3 OH) in the condensed phase. The abstraction of a hydrogen atom from either of these solvents by a Br atom is highly endoergic: 3269 cm -1 for DMSO and 1416 or 4414 cm -1 for CH 3 OH, depending on the hydrogen atom abstracted. Thus, there is no thermal abstraction reaction at room temperature. Broadband electronic transient absorption shows that following photolysis of bromine precursors Br atoms form van der Waals complexes with the solvent molecules in about 5 ps and this Br • -solvent complex undergoes recombination. To explore the influence of vibrational energy on the abstraction reactions, we introduce a near-infrared (NIR) pump pulse following the photolysis pulse to excite the first overtone of the C-H (or O-H) stretch of the solvent molecules. Using single-wavelength detection, we observe a loss of the Br • -solvent complex that requires the presence of both photolysis and NIR pump pulses. Moreover, the magnitude of this loss depends on the NIR wavelength. Although this loss of reactive Br supports the notion of vibrationally driven chemistry, it is not concrete evidence of the hydrogen-abstraction reaction. To verify that the loss of reactive Br results from the vibrationally driven bimolecular reaction, we examine the pH dependence of the solution (as a measure of the formation of the HBr product) following long-time irradiation of the sample with both photolysis and NIR pump beams. We observe that when the NIR beam is on-resonance, the hydronium ion concentration increases fourfold as compared to that when it is off-resonance, suggesting the formation of HBr via a vibrationally driven hydrogen-abstraction reaction in solution.

Reactivity of a dearomatised pincer CoIIBr complex with PNCNHC donors: alkylation and Si-H bond activation via metal-ligand cooperation.

PubMed

Simler, Thomas; Choua, Sylvie; Danopoulos, Andreas A; Braunstein, Pierre

2018-05-18

The double aminolysis reaction of [Co{N(SiMe3)2}2] by the salt 1-(6-((dicyclohexylphosphaneyl)methyl)pyridin-2-yl)-3-(2,6-diisopropylphenyl)-1H-imidazol-3-ium bromide, which contains one phosphane, one pyridine and one imidazolium groups, of formula [o-Cy2PCH2(C5H3N)(o-C3H3N2DiPP)]Br and abbreviated as (CyPNpyrCim)Br, was previously shown to afford the Co(ii) complex [Co(CyP*NaCNHC)Br] (1) containing a dearomatised picolyl moiety in the tridentate, anionic donor ligand CyP*NaCNHC (Na = anionic amido, P* = vinylic P donor). We now report that formation of 1 is preceded by an intermediate tentatively assignable to the 5-coordinate Co(ii) complex [Co(CyPNpyrCNHC){N(SiMe3)2}Br] (2). The reaction of 1 with LiCH2SiMe3 afforded the dark purple, paramagnetic [Co(CyP*NaCNHC)CH2SiMe3] (3) with a low spin d7 CoII; the electronic configurations of 1 and 3 were corroborated by EPR spectroscopy. Addition of excess (≥4 equiv.) H2SiPh2 to a solution of 1 gave the diamagnetic [Co(CyP(SiHPh2)NCNHC)Br] (4) following Si-H activation and silylation of the ligand backbone at the α-CHP. Reduction of CoII to CoI by silanes is uncommon.

Probing the early stages of solvation of cis-pinate dianions by water, acetonitrile, and methanol: a photoelectron spectroscopy and theoretical study.

PubMed

Hou, Gao-Lei; Kong, Xiang-Tao; Valiev, Marat; Jiang, Ling; Wang, Xue-Bin

2016-02-07

cis-Pinic acid is one of the most important oxidation products of α-pinene--a key monoterpene compound in biogenic emission processes. Molecular level understanding of its interaction with water in cluster formation is an important and necessary prerequisite for ascertaining its role in the aerosol formation processes. In this work, we studied the structures and energetics of the solvated clusters of cis-pinate (cis-PA(2-)), the doubly deprotonated dicarboxylate of cis-pinic acid, with H2O, CH3OH, and CH3CN by negative ion photoelectron spectroscopy and ab initio theoretical calculations. We found that cis-PA(2-) prefers being solvated alternately on the two -CO2(-) groups with increase of solvent coverage, a well-known solvation pattern that has been observed in microhydrated linear dicarboxylate dianion (DCn(2-)) clusters. Experiments and calculations further reveal an intriguing feature for the existence of the asymmetric type isomers for cis-PA(2-)(H2O)2 and cis-PA(2-)(CH3OH)2, in which both solvent molecules interact with only one of the -CO2(-) groups, a phenomenon that has not been observed in DCn(2-) water clusters and exhibits that the subtle effect of the rigid four-membered carbon ring brought on the cis-PA(2-) solvation. The dominant interactions between cis-PA(2-) and solvent molecules form bidentate O(-)...H-O H-bonds for H2O, O(-)...H-O and O(-)...H-C H-bonds for CH3OH, and tridentate O(-)...H-C H-bonds for CH3CN. The formation of inter-solvent H-bonds between H2O and CH3CN is found to be favorable in mixed solvent clusters, different from that between H2O and CH3OH. These findings have important implications for understanding the mechanism of cluster growth and the formation of atmospheric organic aerosols, as well as for rationalizing the nature of structure-function relationship of proteins containing carboxylate groups in various solvent environments.

Compact heat and mass exchangers of the plate fin type in thermal sorption systems: Application in an absorption heat pump with the working pair CH3OH-LiBr/ZnBr2

NASA Astrophysics Data System (ADS)

Becker, Harry

The possible application of Compact Heat and Mass Exchangers (CHME) in a gas fired Absorption Heat Pump (AHP) for domestic heating is studied. The above mentioned heat and mass exchangers are of the plate type. The space between the parallel and plain plates is filled up with corrugated plates of a certain height. The plain and finned plates are stacked and welded together. This gives a heat and mass exchanger which is very compact, expressed by a high area density (m2/m3). This leads to heat and mass transfer processes with small temperature and concentration differences. For testing purposes a pilot plant was built using the above type of components in order to test their heat and/or mass transfer performance. Only the generator is of the Shell And Tube (SAT) type. As the working pair, CH3OH - LiBr/ ZnBr2 was chosen, with the alcohol as the solvent and the salt mixture as the absorbent. This leads to sub atmospheric working pressures with only solvent in the vapor phase. Three series of experiments have been carried out, during which the input parameters were varied over a certain range. It is concluded that the plate fin CHMES are very suitable for application in an AHP for domestic heating purposes.

Interaction and dynamics of (alkylamide + electrolyte) deep eutectics: Dependence on alkyl chain-length, temperature, and anion identity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guchhait, Biswajit; Das, Suman; Daschakraborty, Snehasis

Here we investigate the solute-medium interaction and solute-centered dynamics in (RCONH{sub 2} + LiX) deep eutectics (DEs) via carrying out time-resolved fluorescence measurements and all-atom molecular dynamics simulations at various temperatures. Alkylamides (RCONH{sub 2}) considered are acetamide (CH{sub 3}CONH{sub 2}), propionamide (CH{sub 3}CH{sub 2}CONH{sub 2}), and butyramide (CH{sub 3}CH{sub 2}CH{sub 2}CONH{sub 2}); the electrolytes (LiX) are lithium perchlorate (LiClO{sub 4}), lithium bromide (LiBr), and lithium nitrate (LiNO{sub 3}). Differential scanning calorimetric measurements reveal glass transition temperatures (T{sub g}) of these DEs are ∼195 K and show a very weak dependence on alkyl chain-length and electrolyte identity. Time-resolved and steady statemore » fluorescence measurements with these DEs have been carried out at six-to-nine different temperatures that are ∼100–150 K above their individual T{sub g}s. Four different solute probes providing a good spread of fluorescence lifetimes have been employed in steady state measurements, revealing strong excitation wavelength dependence of probe fluorescence emission peak frequencies. Extent of this dependence, which shows sensitivity to anion identity, has been found to increase with increase of amide chain-length and decrease of probe lifetime. Time-resolved measurements reveal strong fractional power dependence of average rates for solute solvation and rotation with fraction power being relatively smaller (stronger viscosity decoupling) for DEs containing longer amide and larger (weaker decoupling) for DEs containing perchlorate anion. Representative all-atom molecular dynamics simulations of (CH{sub 3}CONH{sub 2} + LiX) DEs at different temperatures reveal strongly stretched exponential relaxation of wavevector dependent acetamide self dynamic structure factor with time constants dependent both on ion identity and temperature, providing justification for explaining the fluorescence results in terms of temporal heterogeneity and amide clustering in these multi-component melts.« less

Personality traits in patients with cluster headache: a comparison with migraine patients.

PubMed

Muñoz, I; Hernández, M S; Santos, S; Jurado, C; Ruiz, L; Toribio, E; Sotelo, E M; Guerrero, A L; Molina, V; Uribe, F; Cuadrado, M L

2016-01-01

Cluster headache (CH) has been associated with certain personality traits and lifestyle features, but there are few studies assessing personality profiles in CH. We aimed to analyze personality traits in patients with CH, and to compare them with those found in migraine. We included all consecutive patients with CH attending 5 outpatient offices between January and December 2013. Personality traits were evaluated using the Salamanca screening test, a validated inventory assessing 11 personality traits grouped in 3 clusters. We analyzed the test results in this population, and compared them with those of a migraine population previously assessed with the same test. Eighty patients with CH (75 men, 5 women; mean age, 43.2 ± 9.9 years) were recruited. The reference population consisted of 164 migraine patients (30 men, 134 women; mean age 36.4 ± 12.7 years). In CH patients, the most frequent personality traits were anancastic (52.5 %), anxious (47.5 %), histrionic (45 %), schizoid (42.5 %), impulsive (32.5 %) and paranoid (30 %). When compared to migraine patients, paranoid (p < 0.001; χ2 test), and schizoid traits (p = 0.007; χ2 test) were significantly more prevalent in CH patients. In logistic regression analysis the paranoid trait was significantly associated with CH (p = 0.001; OR: 3.27, 95 % CI [1.66-6.43]). According to the Salamanca screening test, personality traits included in cluster A (odd or eccentric disorders) are more prevalent in CH patients than in a population of migraineurs. Larger studies are needed to determine whether certain personality traits are related to CH.

Unique Features of the Photocatalytic Reduction of H2O and CO2 by New Catalysts Based on the Analogues of CdS, Cd4P2X3 (X = Cl, Br, I).

PubMed

Roy, Anand; Chhetri, Manjeet; Prasad, Suchitra; Waghmare, Umesh V; Rao, C N R

2018-01-24

Photochemical reduction of H 2 O and CO 2 has been investigated with a new family of catalysts of the formula Cd 4 P 2 X 3 (X= Cl, Br, I), obtained by the complete aliovalent substitution of the sulfide ions in CdS by P and X (Cl, Br, I). Unlike CdS, the Cd 4 P 2 X 3 compounds exhibit hydrogen evolution and CO 2 reduction from water even in the absence of a sacrificial agent or a cocatalyst. Use of Ni x P y as the cocatalyst, enhances hydrogen evolution, reaching 3870 (apparent quantum yield (AQY) = 4.11) and 9258 (AQY = 9.83) μmol h -1 g -1 , respectively, under artificial and natural (sunlight) irradiation, in the case of Cd 4 P 2 Br 3 /Ni x P y . Electrochemical and spectroscopic studies have been employed to understand the photocatalytic activity of this family of compounds. Unlike most of the semiconductor-based photocatalysts, Cd 4 P 2 X 3 catalysts reduce CO 2 to CO and CH 4 in the absence of sacrificial-agent or cocatalyst using water as the electron source. CO, CH 4 , and H 2 have been obtained with these catalysts under artificial as well as sun-light irradiation. First-principles, calculations have been carried out to understand the electronic structure and catalytic features of these new catalysts.

Micellar induced regioselectivity in the two-step consecutive reaction of SO3(2-) with Br-(CH2CH2)n-Br (n=2-5).

PubMed

Currie, Fredrik; Jarvoll, Patrik; Holmberg, Krister; Romsted, Laurence S; Gunaseelan, Krishnan

2007-08-15

High field (800 MHz) (1)H NMR was used to monitor the two-step consecutive reaction of excess SO(3)(2-) with symmetrical bifunctional alpha,omega-dibromoalkanes with butane (DBB), hexane (DBH), octane (DBO), and decane (DBD) chains in CTAB micelles at 25 degrees C. The first-order rate constant for the first substitution step for DBB and DBH is about 5 times faster than for the second, but the kinetics for DBO and DBD were not cleanly first-order. After 40 min, the solution contained about 80% of the intermediate bromoalkanesulfonate from DBB and DBH and the remainder is alkanedisulfonate and unreacted starting material. The same reactions were carried out in homogeneous MeOH/D(2)O solutions at 50 degrees C. The rate constants for all four alpha,omega-dibromoalkanes were first-order throughout the time course of the reaction and the same within +/-10%. However, because micellar solutions are organized on the nanoscale and bring together lipophilic and hydrophilic reactants into a small reaction volume at the micellar interface, they speed this substitution reaction considerably compared to reaction in MeOH/D(2)O. The CTAB micelles also induce a significant regioselectivity in product formation by speeding the first step of the consecutive reaction more than the second. The results are consistent with the bromoalkanesulfonate intermediates having a radial orientation within the micelles with the -CH(2)SO(3)(-) group in the interfacial region and the -CH(2)Br group directed into the micellar core such that the concentration of -CH(2)Br groups in the reactive zone, i.e., the micellar interface, is significantly reduced. These results provide the first example of self-assembled surfactant system altering the relative rates of the reaction steps of a consecutive reaction and, in doing so, enhancing monosubstitution of a symmetrically disubstituted species.

Rates of proton transfer to Fe-S-based clusters: comparison of clusters containing {MFe(mu(2)-S)(2)}n+ and {MFe(3)(mu(3)-S)(4)}n+ (M = Fe, Mo, or W) cores.

PubMed

Bates, Katie; Garrett, Brendan; Henderson, Richard A

2007-12-24

The rates of proton transfer from [pyrH]+ (pyr = pyrrolidine) to the binuclear complexes [Fe2S2Cl4]2- and [S2MS2FeCl2]2- (M = Mo or W) are reported. The reactions were studied using stopped-flow spectrophotometry, and the rate constants for proton transfer were determined from analysis of the kinetics of the substitution reactions of these clusters with the nucleophiles Br- or PhS- in the presence of [pyrH]+. In general, Br- is a poor nucleophile for these clusters, and proton transfer occurs before Br- binds, allowing direct measure of the rate of proton transfer from [pyrH]+ to the cluster. In contrast, PhS- is a better nucleophile, and a pathway in which PhS- binds preferentially to the cluster prior to proton transfer from [pyrH]+ usually operates. For the reaction of [Fe2S2Cl4]2- with PhS- in the presence of [pyrH]+ both pathways are observed. Comparison of the results presented in this paper with analogous studies reported earlier on cuboidal Fe-S-based clusters allows discussion of the factors which affect the rates of proton transfer in synthetic clusters including the nuclearity of the cluster core, the metal composition, and the nature of the terminal ligands. The possible relevance of these findings to the protonation sites of natural Fe-S-based clusters, including FeMo-cofactor from nitrogenase, are presented.

Experimental verification of the cluster model of CH3F-(ortho-H2)n in solid para-H2 by using mid-infrared pump-probe laser spectroscopy

NASA Astrophysics Data System (ADS)

Miyamoto, Yuki; Mizoguchi, Asao; Kanamori, Hideto

2017-03-01

The bleaching process in the C-F stretching mode (ν3 band) of CH3F-(ortho-H2)n [n = 0 and 1] clusters in solid para-H2 was monitored using pump and probe laser spectroscopy on the C-H stretching mode (ν1 and 2ν5 bands). From an analysis of the depleted spectral profiles, the transition frequency and linewidth of each cluster were directly determined. The results agree with the values previously derived from a deconvolution analysis of the broadened ν1/2ν5 spectrum observed by FTIR spectroscopy. The complementary increase and decrease between the n = 0 and 1 components were also verified through monitoring the ν1 and 2ν5 bands, which suggests a closed system among the CH3F-(ortho-H2)n clusters. These observations provide experimental verification of the CH3F-(ortho-H2)n cluster model. On the other hand, a trial to observe the bleaching process by pumping the C-H stretching mode was not successful. This result may be important for understanding the dynamics of vibrational relaxation processes in CH3F-(ortho-H2)n in solid para-H2.

Experimental verification of the cluster model of CH3F-(ortho-H2)n in solid para-H2 by using mid-infrared pump-probe laser spectroscopy.

PubMed

Miyamoto, Yuki; Mizoguchi, Asao; Kanamori, Hideto

2017-03-21

The bleaching process in the C-F stretching mode (ν 3 band) of CH 3 F-(ortho-H 2 ) n [n = 0 and 1] clusters in solid para-H 2 was monitored using pump and probe laser spectroscopy on the C-H stretching mode (ν 1 and 2ν 5 bands). From an analysis of the depleted spectral profiles, the transition frequency and linewidth of each cluster were directly determined. The results agree with the values previously derived from a deconvolution analysis of the broadened ν 1 /2ν 5 spectrum observed by FTIR spectroscopy. The complementary increase and decrease between the n = 0 and 1 components were also verified through monitoring the ν 1 and 2ν 5 bands, which suggests a closed system among the CH 3 F-(ortho-H 2 ) n clusters. These observations provide experimental verification of the CH 3 F-(ortho-H 2 ) n cluster model. On the other hand, a trial to observe the bleaching process by pumping the C-H stretching mode was not successful. This result may be important for understanding the dynamics of vibrational relaxation processes in CH 3 F-(ortho-H 2 ) n in solid para-H 2 .

Laser flash photolysis studies of atmospheric free radical chemistry using optical diagnostic techniques

NASA Technical Reports Server (NTRS)

Wine, Paul H.; Nicovich, J. M.; Hynes, Anthony J.; Stickel, Robert E.; Thorn, R. P.; Chin, Mian; Cronkhite, Jeffrey A.; Shackelford, Christie J.; Zhao, Zhizhong; Daykin, Edward P.

1993-01-01

Some recent studies carried out in our laboratory are described where laser flash photolytic production of reactant free radicals has been combined with reactant and/or product detection using time-resolved optical techniques to investigate the kinetics and mechanisms of important atmospheric chemical reactions. Discussed are (1) a study of the radical-radical reaction O + BrO yields Br + O2 where two photolysis lasers are employed to prepare the reaction mixture and where the reactants O and BrO are monitored simultaneously using atomic resonance fluorescence to detect O and multipass UV absorption to detect BrO; (2) a study of the reaction of atomic chlorine with dimethylsulfide (CH3SCH3) where atomic resonance fluorescence detection of Cl is employed to elucidate the kinetics and tunable diode laser absorption spectroscopy is employed to investigate the HCl product yield; and (3) a study of the aqueous phase chemistry of Cl2(-) radicals where longpath UV absorption spectroscopy is employed to investigate the kinetics of the Cl2(-) + H2O reaction.

Electrical properties and Raman studies of phase transitions in ferroelectric [N(CH3)4]2CoCl2Br2

NASA Astrophysics Data System (ADS)

Ben Mohamed, C.; Karoui, K.; Bulou, A.; Ben Rhaiem, A.

2018-03-01

The present paper accounted for the synthesis, electric properties and vibrational spectroscopy of [N(CH3)4]2CoCl2Br2. The dielectric spectra were measured in the frequency range 10-1-105 Hz and temperature interval from 223 to 393 K. The dielectical properties confirm the ferroelectric-paraelectric phase transition at 290 K, which is reported by Abdallah Ben Rhaiem et al. (2013). The equivalent circuit based on the Z-View-software was proposed and the conduction mechanisms were determined. The obtained results have been discussed in terms of the correlated barrier hopping model (CBH) in phase I and non-overlapping small polaron tunneling model (NSPT) in phases II and III. Raman spectra as function temperature have been used to characterize the phase transitions and their nature, which indicates a change of the some peak near the transitions phase.

Proof that Burkholderia Strains Form Effective Symbioses with Legumes: a Study of Novel Mimosa-Nodulating Strains from South America

PubMed Central

Chen, Wen-Ming; de Faria, Sergio M.; Straliotto, Rosângela; Pitard, Rosa M.; Simões-Araùjo, Jean L.; Chou, Jui-Hsing; Chou, Yi-Ju; Barrios, Edmundo; Prescott, Alan R.; Elliott, Geoffrey N.; Sprent, Janet I.; Young, J. Peter W.; James, Euan K.

2005-01-01

Twenty Mimosa-nodulating bacterial strains from Brazil and Venezuela, together with eight reference Mimosa-nodulating rhizobial strains and two other β-rhizobial strains, were examined by amplified rRNA gene restriction analysis. They fell into 16 patterns and formed a single cluster together with the known β-rhizobia, Burkholderia caribensis, Burkholderia phymatum, and Burkholderia tuberum. The 16S rRNA gene sequences of 15 of the 20 strains were determined, and all were shown to belong to the genus Burkholderia; four distinct clusters could be discerned, with strains isolated from the same host species usually clustering very closely. Five of the strains (MAP3-5, Br3407, Br3454, Br3461, and Br3469) were selected for further studies of the symbiosis-related genes nodA, the NodD-dependent regulatory consensus sequences (nod box), and nifH. The nodA and nifH sequences were very close to each other and to those of B. phymatum STM815, B. caribensis TJ182, and Cupriavidus taiwanensis LMG19424 but were relatively distant from those of B. tuberum STM678. In addition to nodulating their original hosts, all five strains could also nodulate other Mimosa spp., and all produced nodules on Mimosa pudica that had nitrogenase (acetylene reduction) activities and structures typical of effective N2-fixing symbioses. Finally, both wild-type and green fluorescent protein-expressing transconjugant strains of Br3461 and MAP3-5 produced N2-fixing nodules on their original hosts, Mimosa bimucronata (Br3461) and Mimosa pigra (MAP3-5), and hence this confirms strongly that Burkholderia strains can form effective symbioses with legumes. PMID:16269788

Proof that Burkholderia strains form effective symbioses with legumes: a study of novel Mimosa-nodulating strains from South America.

PubMed

Chen, Wen-Ming; de Faria, Sergio M; Straliotto, Rosângela; Pitard, Rosa M; Simões-Araùjo, Jean L; Chou, Jui-Hsing; Chou, Yi-Ju; Barrios, Edmundo; Prescott, Alan R; Elliott, Geoffrey N; Sprent, Janet I; Young, J Peter W; James, Euan K

2005-11-01

Twenty Mimosa-nodulating bacterial strains from Brazil and Venezuela, together with eight reference Mimosa-nodulating rhizobial strains and two other beta-rhizobial strains, were examined by amplified rRNA gene restriction analysis. They fell into 16 patterns and formed a single cluster together with the known beta-rhizobia, Burkholderia caribensis, Burkholderia phymatum, and Burkholderia tuberum. The 16S rRNA gene sequences of 15 of the 20 strains were determined, and all were shown to belong to the genus Burkholderia; four distinct clusters could be discerned, with strains isolated from the same host species usually clustering very closely. Five of the strains (MAP3-5, Br3407, Br3454, Br3461, and Br3469) were selected for further studies of the symbiosis-related genes nodA, the NodD-dependent regulatory consensus sequences (nod box), and nifH. The nodA and nifH sequences were very close to each other and to those of B. phymatum STM815, B. caribensis TJ182, and Cupriavidus taiwanensis LMG19424 but were relatively distant from those of B. tuberum STM678. In addition to nodulating their original hosts, all five strains could also nodulate other Mimosa spp., and all produced nodules on Mimosa pudica that had nitrogenase (acetylene reduction) activities and structures typical of effective N2-fixing symbioses. Finally, both wild-type and green fluorescent protein-expressing transconjugant strains of Br3461 and MAP3-5 produced N2-fixing nodules on their original hosts, Mimosa bimucronata (Br3461) and Mimosa pigra (MAP3-5), and hence this confirms strongly that Burkholderia strains can form effective symbioses with legumes.

Infrared absorption of methanol clusters (CH3OH)n with n = 2-6 recorded with a time-of-flight mass spectrometer using infrared depletion and vacuum-ultraviolet ionization.

PubMed

Han, Hui-Ling; Camacho, Cristopher; Witek, Henryk A; Lee, Yuan-Pern

2011-04-14

We investigated IR spectra in the CH- and OH-stretching regions of size-selected methanol clusters, (CH(3)OH)(n) with n = 2-6, in a pulsed supersonic jet by using the IR-VUV (vacuum-ultraviolet) ionization technique. VUV emission at 118 nm served as the source of ionization in a time-of-flight mass spectrometer. The tunable IR laser emission served as a source of predissociation or excitation before ionization. The variations of intensity of protonated methanol cluster ions (CH(3)OH)(n)H(+) and CH(3)OH(+) and (CH(3)OH)(2)(+) were monitored as the IR laser light was tuned across the range 2650-3750 cm(-1). Careful processing of these action spectra based on photoionization efficiencies and the production and loss of each cluster due to photodissociation yielded IR spectra of the size-selected clusters. Spectra of methanol clusters in the OH region have been extensively investigated; our results are consistent with previous reports, except that the band near 3675 cm(-1) is identified as being associated with the proton acceptor of (CH(3)OH)(2). Spectra in the CH region are new. In the region 2800-3050 cm(-1), bands near 2845, 2956, and 3007 cm(-1) for CH(3)OH split into 2823, 2849, 2934, 2955, 2984, and 3006 cm(-1) for (CH(3)OH)(2) that correspond to proton donor and proton acceptor, indicating that the methanol dimer has a preferred open-chain structure. In contrast, for (CH(3)OH)(3), the splitting diminishes and the bands near 2837, 2954, and 2987 cm(-1) become narrower, indicating a preferred cyclic structure. Anharmonic vibrational wavenumbers predicted for the methanol open-chain dimer and the cyclic trimer with the B3LYP∕VPT2∕ANO1 level of theory are consistent with experimental results. For the tetramer and pentamer, the spectral pattern similar to that of the trimer but with greater widths was observed, indicating that the most stable structures are also cyclic.

Mechanistic Insights on C-O and C-C Bond Activation and Hydrogen Insertion during Acetic Acid Hydrogenation Catalyzed by Ruthenium Clusters in Aqueous Medium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shangguan, Junnan; Olarte, Mariefel V.; Chin, Ya-Huei

Catalytic pathways for acetic acid (CH3COOH) and hydrogen (H2) reactions on dispersed Ru clusters in the aqueous medium and the associated kinetic requirements for C-O and C-C bond cleavages and hydrogen insertion are established from rate and isotopic assessments. CH3COOH reacts with H2 in steps that either retain its carbon backbone and lead to ethanol, ethyl acetate, and ethane (47-95 %, 1-23 %, and 2-17 % carbon selectivities, respectively) or break its C-C bond and form methane (1-43 % carbon selectivities) at moderate temperatures (413-523 K) and H2 pressures (10-60 bar, 298 K). Initial CH3COOH activation is the kinetically relevantmore » step, during which CH3C(O)-OH bond cleaves on a metal site pair at Ru cluster surfaces nearly saturated with adsorbed hydroxyl (OH*) and acetate (CH3COO*) intermediates, forming an adsorbed acetyl (CH3CO*) and hydroxyl (OH*) species. Acetic acid turnover rates increase proportionally with both H2 (10-60 bar) and CH3COOH concentrations at low CH3COOH concentrations (<0.83 M), but decrease from first to zero order as the CH3COOH concentration and the CH3COO* coverages increase and the vacant Ru sites concomitantly decrease. Beyond the initial CH3C(O)-OH bond activation, sequential H-insertions on the surface acetyl species (CH3CO*) lead to C2 products and their derivative (ethanol, ethane, and ethyl acetate) and the competitive C-C bond cleavage of CH3CO* causes the eventual methane formation. The instantaneous carbon selectivities towards C2 species (ethanol, ethane, and ethyl acetate) increase linearly with the concentration of proton-type Hδ+ (derived from carboxylic acid dissociation) and chemisorbed H*. The selectivities towards C2 products decrease with increasing temperature, because of higher observed barriers for C-C bond cleavage than H-insertion. This study offers an interpretation of mechanism and energetics and provides kinetic evidence of carboxylic acid assisted proton-type hydrogen (Hδ+) shuffling during H-insertion steps in the aqueous phase, unlike those in the vapor phase, during the hydrogenation of acetic acid on Ru clusters.« less

Double-inversion mechanisms of the X⁻ + CH₃Y [X,Y = F, Cl, Br, I] SN2 reactions.

PubMed

Szabó, István; Czakó, Gábor

2015-03-26

The double-inversion and front-side attack transition states as well as the proton-abstraction channels of the X(-) + CH3Y [X,Y = F, Cl, Br, I] reactions are characterized by the explicitly correlated CCSD(T)-F12b/aug-cc-pVTZ(-PP) level of theory using small-core relativistic effective core potentials and the corresponding aug-cc-pVTZ-PP bases for Br and I. In the X = F case the double-inversion classical(adiabatic) barrier heights are 28.7(25.6), 15.8(13.4), 13.2(11.0), and 8.6(6.6) kcal mol(-1) for Y = F, Cl, Br, and I, respectively, whereas the barrier heights are in the 40-90 kcal mol(-1) range for the other 12 reactions. The abstraction channels are always above the double-inversion saddle points. For X = F, the front-side attack classical(adiabatic) barrier heights, 45.8(44.8), 31.0(30.3), 24.7(24.2), and 19.5(19.3) kcal mol(-1) for Y = F, Cl, Br, and I, respectively, are higher than the corresponding double-inversion ones, whereas for the other systems the front-side attack saddle points are in the 35-70 kcal mol(-1) range. The double-inversion transition states have XH···CH2Y(-) structures with Cs point-group symmetry, and the front-side attack saddle points have either Cs (X = F or X = Y) or C1 symmetry with XCY angles in the 78-88° range. On the basis of the previous reaction dynamics simulations and the minimum energy path computations along the inversion coordinate of selected XH···CH2Y(-) systems, we suggest that the double inversion may be a general mechanism for SN2 reactions.

Cooperatively enhanced ionic hydrogen bonds in Cl-(CH3OH)(1-3)Ar clusters.

PubMed

Beck, Jordan P; Lisy, James M

2010-09-23

Infrared predissociation (IRPD) spectra of Cl−(CH3OH)1-3Ar and Cl-(CH3OD)1-3Ar were obtained in the OH and CH stretching regions. The use of methanol-d1 was necessary to distinguish between CH stretches and hydrogen-bonded OH features. The spectra of Cl-(CH3OH)2-3Ar show intense features at frequencies lower than the CH stretches, indicating structures with very strong hydrogen bonds. These strong hydrogen bonds arise from structures in which a Cl-···methanol ionic hydrogen bond is cooperatively enhanced by the presence of a second shell and, in the case of Cl-(CH3OH)3Ar, a third shell methanol. The strongest hydrogen bond is observed in the Cl-(CH3OH)3Ar spectrum at 2733 cm-1, shifted a remarkable -948 cm-1 from the neutral, gas-phase methanol value. Harmonic, ab initio frequency calculations are not adequate in describing these strong hydrogen bonds. Therefore, we describe a simple computational approach to better approximate the hydrogen bond frequencies. Overall, the results of this study indicate that high-energy isomers are very efficiently trapped using our experimental method of introducing Cl- into neutral, cold methanol-argon clusters.

Mechanisms of SN2 reactions: insights from a nearside/farside analysis.

PubMed

Hennig, Carsten; Schmatz, Stefan

2015-10-28

A nearside/farside analysis of differential cross sections has been performed for the complex-forming SN2 reaction Cl(-) + CH3Br → ClCH3 + Br(-). It is shown that for low rotational quantum numbers a direct "nearside" reaction mechanism plays an important role and leads to anisotropic differential cross sections. For high rotational quantum numbers, indirect mechanisms via a long-lived intermediate complex are prevalent (independent of a nearside/farside configuration), leading to isotropic cross sections. Quantum mechanical interference can be significant at specific energies or angles. Averaging over energies and angles reveals that the nearside/farside decomposition in a semiclassical interpretation can reasonably account for the analysis of the reaction mechanism.

Structural and thermodynamic aspects of organic-inorganic mixed halide (CH3NH3PbI3-xBrx) perovskite

NASA Astrophysics Data System (ADS)

Singh, Rajan Kumar; Kumar, Ranveer; Jain, Neha; Singh, Jai; Mishra, S. K.

2018-05-01

Mixed Bromine and iodine lead halide perovskite CH3NH3PbI3-xBrx have been synthesized by solution phase method using CH3NH3I and PbBr2 precursors in ambient conditions. X-ray diffraction indicates the formation of cubic perovskite at room temperature with space group of Pm3m. The mixed perovskite improved crystallanity and grain contour which may significant improve photovoltaic performance of perovskite devices. Thermodynamic behavior of such type of material also indicates energy absorption nature of materials.

Tetrel bond of pseudohalide anions with XH3F (X = C, Si, Ge, and Sn) and its role in SN2 reaction

NASA Astrophysics Data System (ADS)

Liu, Mingxiu; Li, Qingzhong; Cheng, Jianbo; Li, Wenzuo; Li, Hai-Bei

2016-12-01

The complexes of XH3F⋯ N3-/OCN-/SCN- (X = C, Si, Ge, and Sn) have been investigated at the MP2/aug-cc-pVTZ(PP) level. The σ-hole of X atom in XH3F acts as a Lewis acid forming a tetrel bond with pseudohalide anions. Interaction energies of these complexes vary from -8 to -50 kcal/mol, mainly depending on the nature of X and pseudohalide anions. Charge transfer from N/O/S lone pair to X-F and X-H σ* orbitals results in the stabilization of these complexes, and the former orbital interaction is responsible for the large elongation of X-F bond length and the remarkable red shift of its stretch vibration. The tetrel bond in the complexes of XH3F (X = Si, Ge, and Sn) exhibits a significant degree of covalency with XH3F distorted significantly in these complexes. A breakdown of the individual forces involved attributes the stability of the interaction to mainly electrostatic energy, with a relatively large contribution from polarization. The transition state structures that connect the two minima for CH3Br⋯ N3-complexhave been localized and characterized. The energetic, geometrical, and topological parameters of the complexes were analyzed in the different stages of the SN2 reaction N3- + CH3Br → Br- + CH3N3.

Diversity of band gap and photoluminescence properties of lead halide perovskite: A halogen-dependent spectroscopic study

NASA Astrophysics Data System (ADS)

Yu, Wenlei; Jiang, Yunfeng; Zhu, Xiuwei; Luo, Chunhua; Jiang, Kai; Chen, Liangliang; Zhang, Juan

2018-05-01

The effects of halogen substitution on microstructure, optical absorption, and phonon modes for perovskite CH3NH3PbX3 (MAPbX3, X = I/Br/Cl) films grown on FTO substrates have been investigated. The X-ray diffraction analysis exhibited good crystallization, and the strong diffraction peak assigned to (1 0 0) c for X = Br/Cl shifted toward a higher angle compared to (1 1 0) t of MAPbI3. Band-gap tuning from 1.63 to 2.37 to 3.11 eV in the I-Br-Cl series can be found due to the halogen effects. These energy values closely match the positions of peak determined from photoluminescence experiments. The remarkable absorption dip and emission peak appear for the MAPbBr3, suggesting higher crystallinity under the same preparation conditions. The wavenumbers of main IR-vibrations slightly decrease with ionic radius of the halogen increasing (in the order of Cl-Br-I), which related to the increasing polarizability. These results provide important progress towards the understanding of the halide role in the realization of high performance MAPbX3-based solar cells.

Fast and accurate predictions of covalent bonds in chemical space.

PubMed

Chang, K Y Samuel; Fias, Stijn; Ramakrishnan, Raghunathan; von Lilienfeld, O Anatole

2016-05-07

We assess the predictive accuracy of perturbation theory based estimates of changes in covalent bonding due to linear alchemical interpolations among molecules. We have investigated σ bonding to hydrogen, as well as σ and π bonding between main-group elements, occurring in small sets of iso-valence-electronic molecules with elements drawn from second to fourth rows in the p-block of the periodic table. Numerical evidence suggests that first order Taylor expansions of covalent bonding potentials can achieve high accuracy if (i) the alchemical interpolation is vertical (fixed geometry), (ii) it involves elements from the third and fourth rows of the periodic table, and (iii) an optimal reference geometry is used. This leads to near linear changes in the bonding potential, resulting in analytical predictions with chemical accuracy (∼1 kcal/mol). Second order estimates deteriorate the prediction. If initial and final molecules differ not only in composition but also in geometry, all estimates become substantially worse, with second order being slightly more accurate than first order. The independent particle approximation based second order perturbation theory performs poorly when compared to the coupled perturbed or finite difference approach. Taylor series expansions up to fourth order of the potential energy curve of highly symmetric systems indicate a finite radius of convergence, as illustrated for the alchemical stretching of H2 (+). Results are presented for (i) covalent bonds to hydrogen in 12 molecules with 8 valence electrons (CH4, NH3, H2O, HF, SiH4, PH3, H2S, HCl, GeH4, AsH3, H2Se, HBr); (ii) main-group single bonds in 9 molecules with 14 valence electrons (CH3F, CH3Cl, CH3Br, SiH3F, SiH3Cl, SiH3Br, GeH3F, GeH3Cl, GeH3Br); (iii) main-group double bonds in 9 molecules with 12 valence electrons (CH2O, CH2S, CH2Se, SiH2O, SiH2S, SiH2Se, GeH2O, GeH2S, GeH2Se); (iv) main-group triple bonds in 9 molecules with 10 valence electrons (HCN, HCP, HCAs, HSiN, HSiP, HSiAs, HGeN, HGeP, HGeAs); and (v) H2 (+) single bond with 1 electron.

Molecular structure and conformational preferences of 1-bromo-1-silacyclohexane, CH2(CH2CH2)2SiH-Br, as studies by gas-phase electron diffraction and quantum chemistry

NASA Astrophysics Data System (ADS)

Belyakov, A. V.; Baskakov, A. A.; Naraev, V. N.; Rykov, A. N.; Oberhammer, H.; Arnason, I.; Wallevik, S. O.

2012-10-01

The molecular structure of axial and equatorial conformer of the 1-bromo-1-silacyclohexane molecule, CH2(CH2CH2)2SiH-Br, as well as thermodynamic equilibrium between these species are investigated by means of gas-phase electron diffraction and quantum chemistry on the MP2(full)/SDB-AUG-cc-PVTZ level of theory. It is revealed that according to electron diffraction data, the compound exists in the gasphase as a mixture of conformers possessing the chair conformation of the six-membered ring and C s symmetry and differing in the axial and equatorial position of the Si-Br bond (ax. = 80(5) mol %, eq. = 20(7) mol %) at 352 K, that corresponds to the value of A = ( G {ax/○} - G {eq/○}) = -0.82(32) kcal/mol. It is found that observed data agree well with theoretical ones. Using Natural Bond Orbital (NBO) analysis it is revealed that axial conformer of 1-bromo-1-silacyclohexane molecule is an example of the stabilization of the form that is unfavorable from the point of view of steric effects and effects of conjugations. It is concluded that stabilization is achieved due to electrostatic interactions.

Halocarbons in the stratosphere

NASA Astrophysics Data System (ADS)

Fabian, P.; Borchers, R.

1981-12-01

The possible impact of chlorine compounds on the Earth's ozone layer has caused concern. Profiles of the anthropogenic halocarbons F-11 (CFC13) and F-12 (CF2Cl2) have already been measured in the stratosphere1-4. Measurements of the vertical distribution of methyl chloride (CH3Cl), the most important natural chlorine-bearing species confirm that chlorine of anthropogenic origin now predominates the stratosphere5,6. More halogen radicals are added through decomposition of various other halocarbons, most of them released by man. We report here the first measurements of vertical profiles of F-13 (CF3Cl), F-14 (CF4), F-113 (C2F3Cl3), F-114 (C2F4Cl2), F-115 (C2F5Cl), F-116 (C2F6), and F-13 B(CF3Br) resulting from gas chromatography-mass spectrometer (GC-MS) analysis of air samples collected cryogenically between 10 and 33 km, at 44° N. Some data for F-22 (CHF2C1), methyl bromide (CH3Br) and methyl chloroform (CH3CC13) also presented are subject to confirmation.

Potential For Stratospheric Ozone Depletion During Carboniferous

NASA Astrophysics Data System (ADS)

Bill, M.; Goldstein, A. H.

Methyl bromide (CH3Br) constitutes the largest source of bromine atoms to the strato- sphere whereas methyl chloride (CH3Cl) is the most abundant halocarbon in the tro- posphere. Both gases play an important role in stratospheric ozone depletion. For in- stance, Br coupled reactions are responsible for 30 to 50 % of total ozone loss in the polar vortex. Currently, the largest natural sources of CH3Br and CH3Cl appear to be biological production in the oceans, inorganic production during biomass burning and plant production in salt marsh ecosystems. Variations of paleofluxes of CH3Br and CH3Cl can be estimated by analyses of oceanic paleoproductivity, stratigraphic analyses of frequency and distribution of fossil charcoal indicating the occurrence of wildfires, and/or by paleoreconstruction indicating the extent of salt marshes. Dur- ing the lower Carboniferous time (Tournaisian-Visean), the southern margin of the Laurasian continent was characterized by charcoal deposits. Estimation on frequency of charcoal layers indicates that wildfires occur in a range of 3-35 years (Falcon-Lang 2000). This suggests that biomass burning could be an important source of CH3Br and CH3Cl during Tournaisian-Viesan time. During Tounaisian and until Merame- cian carbon and oxygen isotope records have short term oscillations (Bruckschen et al. 1999, Mii et al. 1999). Chesterian time (mid- Carboniferous) is marked by an in- crease in delta18O values ( ~ 2 permil) and an increase of glacial deposit frequency suggesting lower temperatures. The occurrence of glacial deposits over the paleopole suggests polar conditions and the associated special features of polar mete- orology such as strong circumpolar wind in the stratosphere (polar vortex) and polar stratospheric clouds. Thus, conditions leading to polar statospheric ozone depletion can be found. Simultaneously an increase in delta13C values is documented. We interpret the positive shift in delta13C as a result of higher bioproductivity. This interpretation is coherent with higher productivity as a result of an increasing nutrient transfer from the continent to the ocean which occurs during cold and humid climates. We have estimated the effective amount of active chlorine and bromine released to the atmosphere by an increase of the paleobiological production needed to cause ozone depletion. This estimation indicates that the threshold for the onset of ozone strato- spheric depletion is reached if the current day natural source is increased by a factor 2. It is also likely that some of the major methyl halide loss processes such as hydolysis in the ocean and soil uptake were inhibited by lower temperatures, resulting in higher atmospheric concentrations. The increase of methyl halide, by biological sources and 1 the polar conditons in south pole, are compatible with a possible paleoozone layer depletion. Together ozone layer depletion with cold temperatures could be the factors which triggered the mid-Carboniferous (Serpukhovian) extinction. References: Bruckschen, P. ,Oesmann, S.., Veizer, J., 1999. Isotope stratigraphy of the European Carboneferous: Proxy signals for ocean chemistry, climate and tectonics, Chem. Geol., 161, 127-163. Falcon-Lang, H.J., 2000. Fire ecology of the Carbonifer- ous tropical zone, Palaeogeogr. Palaeoclimatol. Palaeoecol., 164, 355-371. Mii, H.S., Grossman, E.L., Yancey, T.E., 1999. Carboniferous isotope stratigraphies of North America: implications for Carboniferous paleoceanography and Mississippian glacia- tion, Geol. Soc. Am. Bull. 111, 960-973. 2

Tunable White-Light Emission in Single-Cation-Templated Three-Layered 2D Perovskites (CH 3 CH 2 NH 3 ) 4 Pb 3 Br 10–x Cl x

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mao, Lingling; Wu, Yilei; Stoumpos, Constantinos C.

Two-dimensional (2D) hybrid halide perovskites come as a family (B) 2(A) n-1PbnX 3n+1 (B and A= cations; X= halide). These perovskites are promising semiconductors for solar cells and optoelectronic applications. Among the fascinating properties of these materials is white-light emission, which has been mostly observed in single-layered 2D lead bromide or chloride systems (n = 1), where the broad emission comes from the transient photoexcited states generated by self-trapped excitons (STEs) from structural distortion. Here we report a multilayered 2D perovskite (n = 3) exhibiting a tunable white-light emission. Ethylammonium (EA+) can stabilize the 2D perovskite structure in EA 4Pbmore » 3Br 10–xCl x (x = 0, 2, 4, 6, 8, 9.5, and 10) with EA + being both the A and B cations in this system. Because of the larger size of EA, these materials show a high distortion level in their inorganic structures, with EA4Pb3Cl10 having a much larger distortion than that of EA 4Pb 3Br 10, which results in broadband white-light emission of EA 4Pb 3Cl 10 in contrast to narrow blue emission of EA4Pb3Br10. The average lifetime of the series decreases gradually from the Cl end to the Br end, indicating that the larger distortion also prolongs the lifetime (more STE states). The band gap of EA 4Pb 3Br 10–xCl x ranges from 3.45 eV (x = 10) to 2.75 eV (x = 0), following Vegard’s law. First-principles density functional theory calculations (DFT) show that both EA 4Pb 3Cl 10 and EA 4Pb 3Br 10 are direct band gap semiconductors. The color rendering index (CRI) of the series improves from 66 (EA 4Pb 3Cl 10) to 83 (EA 4Pb 3Br 0.5Cl 9.5), displaying high tunability and versatility of the title compounds.« less

Tunable White-Light Emission in Single-Cation-Templated Three-Layered 2D Perovskites (CH3CH2NH3)4Pb3Br10-xClx.

PubMed

Mao, Lingling; Wu, Yilei; Stoumpos, Constantinos C; Traore, Boubacar; Katan, Claudine; Even, Jacky; Wasielewski, Michael R; Kanatzidis, Mercouri G

2017-08-30

Two-dimensional (2D) hybrid halide perovskites come as a family (B) 2 (A) n-1 Pb n X 3n+1 (B and A= cations; X= halide). These perovskites are promising semiconductors for solar cells and optoelectronic applications. Among the fascinating properties of these materials is white-light emission, which has been mostly observed in single-layered 2D lead bromide or chloride systems (n = 1), where the broad emission comes from the transient photoexcited states generated by self-trapped excitons (STEs) from structural distortion. Here we report a multilayered 2D perovskite (n = 3) exhibiting a tunable white-light emission. Ethylammonium (EA + ) can stabilize the 2D perovskite structure in EA 4 Pb 3 Br 10-x Cl x (x = 0, 2, 4, 6, 8, 9.5, and 10) with EA + being both the A and B cations in this system. Because of the larger size of EA, these materials show a high distortion level in their inorganic structures, with EA 4 Pb 3 Cl 10 having a much larger distortion than that of EA 4 Pb 3 Br 10 , which results in broadband white-light emission of EA 4 Pb 3 Cl 10 in contrast to narrow blue emission of EA 4 Pb 3 Br 10 . The average lifetime of the series decreases gradually from the Cl end to the Br end, indicating that the larger distortion also prolongs the lifetime (more STE states). The band gap of EA 4 Pb 3 Br 10-x Cl x ranges from 3.45 eV (x = 10) to 2.75 eV (x = 0), following Vegard's law. First-principles density functional theory calculations (DFT) show that both EA 4 Pb 3 Cl 10 and EA 4 Pb 3 Br 10 are direct band gap semiconductors. The color rendering index (CRI) of the series improves from 66 (EA 4 Pb 3 Cl 10 ) to 83 (EA 4 Pb 3 Br 0.5 Cl 9.5 ), displaying high tunability and versatility of the title compounds.

Substituted 6-nitroquipazines, methods of preparation, and methods of use

DOEpatents

Mathis, Jr., Chester A.; Biegon, Anat; Taylor, Scott E.; Enas, Joel D.

1994-01-01

Disclosed is a substituted 6-nitroquipazine of the formula ##STR1## wherein R.sub.1, R.sub.2, R.sub.3, and R.sub.4 are each selected from the group consisting of H, Fl, CL, Br, I, CF.sub.3, CH.sub.2 CH.sub.2 F, CH.sub.3, CH.sub.2 CH.sub.3, and --CH(CH.sub.3).sub.2, and wherein one of R.sub.1, R.sub.2, R.sub.3, and R.sub.4 is other than H. Also disclosed is a method for measurement of serotonin uptake sites in a sample, in which a radioligand is incubated with a sample and then the radioactivity of the radioligand bound to the sample is determined, utilizing a radio labeled substituted 6-nitroquipazine as the radioligand. Also disclosed is a method of manufacture and method of use.

Oxidation of Half-Lantern Pt2(II,II) Compounds by Halocarbons. Evidence of Dioxygen Insertion into a Pt(III)-CH3 Bond.

PubMed

Sicilia, V; Baya, M; Borja, P; Martín, A

2015-08-03

The half-lantern compound [{Pt(bzq)(μ-N^S)}2] (1) [bzq = benzo[h]quinoline, HN^S = 2-mercaptopyrimidine (C4H3N2HS)] reacts with CH3I and haloforms CHX3 (X = Cl, Br, I) to give the corresponding oxidized diplatinum(III) derivatives [{Pt(bzq)(μ-N^S)X}2] (X = Cl 2a, Br 2b, I 2c). These compounds exhibit half-lantern structures with short intermetallic distances (∼2.6 Å) due to Pt-Pt bond formation. The halogen abstraction mechanisms from the halocarbon molecules by the Pt2(II,II) compound 1 were investigated. NMR spectroscopic evidence using labeled reagents support that in the case of (13)CH3I the reaction initiates with an oxidative addition through an SN2 mechanism giving rise to the intermediate species [I(bzq)Pt(μ-N^S)2Pt(bzq)((13)CH3)}]. However, with haloforms the reactions proceed through a radical-like mechanism, thermally (CHBr3, CHI3) or photochemically (CHCl3) activated, giving rise to mixtures of species [X(bzq)Pt(μ-N^S)2Pt(bzq)R] (3a-c) and [X(bzq)Pt(μ-N^S)2Pt(bzq)X] (2a-c). In these cases the presence of O2 favors the formation of species 2 over 3. Transformation of 3 into 2 was possible upon irradiation with UV light. In the case of [I(bzq)Pt(μ-N^S)2Pt(bzq)((13)CH3)}] (3d), in the presence of O2 the formation of the unusual methylperoxo derivative [I(bzq)Pt(μ-N^S)2Pt(bzq)(O-O(13)CH3)}] (4d) was detected, which in the presence of (13)CH3I rendered the final product [{Pt(bzq)(μ-N^S)I}2] (2c) and (13)CH3OH.

Metal aminocarboxylate coordination polymers with chain and layered structures.

PubMed

Dan, Meenakshi; Rao, C N R

2005-11-18

The synthesis and structures of metal aminocarboxylates prepared in acidic, neutral, or alkaline media have been explored with the purpose of isolating coordination polymers with linear chain and two-dimensional layered structures. Metal glycinates of the formulae [CoCl2(H2O)2(CO2CH2NH3)] (I), [MnCl2(CO2CH2NH3)2] (II), and [Cd3Cl6(CO2CH2NH3)4] (III) with one-dimensional chain structures have been obtained by the reaction of the metal salts with glycine in an acidic medium under hydro/solvothermal conditions. These chain compounds contain glycine in the zwitterionic form. 4-Aminobutyric acid transforms to a cyclic amide under such reaction conditions, and the amide forms a chain compound of the formula [CdBr2(C4H7NO)2] (IV). Glycine in the zwitterionic form also forms a two-dimensional layered compound of the formula [Mn(H2O)2(CO2CH2NH3)2]Br2 (V). 6-Aminocaproic acid under alkaline conditions forms layered compounds with metals at room temperature, the metal being coordinated both by the amino nitrogen and the carboxyl oxygen atoms. Of the two layered compounds [Cd{CO2(CH2)5NH2}2]2 H2O (VI) and [Cu{CO2(CH2)5NH2}2]2 H2O (VII), the latter has voids in which water molecules reside.

Methane Production in Dairy Cows Correlates with Rumen Methanogenic and Bacterial Community Structure.

PubMed

Danielsson, Rebecca; Dicksved, Johan; Sun, Li; Gonda, Horacio; Müller, Bettina; Schnürer, Anna; Bertilsson, Jan

2017-01-01

Methane (CH 4 ) is produced as an end product from feed fermentation in the rumen. Yield of CH 4 varies between individuals despite identical feeding conditions. To get a better understanding of factors behind the individual variation, 73 dairy cows given the same feed but differing in CH 4 emissions were investigated with focus on fiber digestion, fermentation end products and bacterial and archaeal composition. In total 21 cows (12 Holstein, 9 Swedish Red) identified as persistent low, medium or high CH 4 emitters over a 3 month period were furthermore chosen for analysis of microbial community structure in rumen fluid. This was assessed by sequencing the V4 region of 16S rRNA gene and by quantitative qPCR of targeted Methanobrevibacter groups. The results showed a positive correlation between low CH 4 emitters and higher abundance of Methanobrevibacter ruminantium clade. Principal coordinate analysis (PCoA) on operational taxonomic unit (OTU) level of bacteria showed two distinct clusters ( P < 0.01) that were related to CH 4 production. One cluster was associated with low CH 4 production (referred to as cluster L) whereas the other cluster was associated with high CH 4 production (cluster H) and the medium emitters occurred in both clusters. The differences between clusters were primarily linked to differential abundances of certain OTUs belonging to Prevotella . Moreover, several OTUs belonging to the family Succinivibrionaceae were dominant in samples belonging to cluster L. Fermentation pattern of volatile fatty acids showed that proportion of propionate was higher in cluster L, while proportion of butyrate was higher in cluster H. No difference was found in milk production or organic matter digestibility between cows. Cows in cluster L had lower CH 4 /kg energy corrected milk (ECM) compared to cows in cluster H, 8.3 compared to 9.7 g CH 4 /kg ECM, showing that low CH 4 cows utilized the feed more efficient for milk production which might indicate a more efficient microbial population or host genetic differences that is reflected in bacterial and archaeal (or methanogens) populations.

Methane Production in Dairy Cows Correlates with Rumen Methanogenic and Bacterial Community Structure

PubMed Central

Danielsson, Rebecca; Dicksved, Johan; Sun, Li; Gonda, Horacio; Müller, Bettina; Schnürer, Anna; Bertilsson, Jan

2017-01-01

Methane (CH4) is produced as an end product from feed fermentation in the rumen. Yield of CH4 varies between individuals despite identical feeding conditions. To get a better understanding of factors behind the individual variation, 73 dairy cows given the same feed but differing in CH4 emissions were investigated with focus on fiber digestion, fermentation end products and bacterial and archaeal composition. In total 21 cows (12 Holstein, 9 Swedish Red) identified as persistent low, medium or high CH4 emitters over a 3 month period were furthermore chosen for analysis of microbial community structure in rumen fluid. This was assessed by sequencing the V4 region of 16S rRNA gene and by quantitative qPCR of targeted Methanobrevibacter groups. The results showed a positive correlation between low CH4 emitters and higher abundance of Methanobrevibacter ruminantium clade. Principal coordinate analysis (PCoA) on operational taxonomic unit (OTU) level of bacteria showed two distinct clusters (P < 0.01) that were related to CH4 production. One cluster was associated with low CH4 production (referred to as cluster L) whereas the other cluster was associated with high CH4 production (cluster H) and the medium emitters occurred in both clusters. The differences between clusters were primarily linked to differential abundances of certain OTUs belonging to Prevotella. Moreover, several OTUs belonging to the family Succinivibrionaceae were dominant in samples belonging to cluster L. Fermentation pattern of volatile fatty acids showed that proportion of propionate was higher in cluster L, while proportion of butyrate was higher in cluster H. No difference was found in milk production or organic matter digestibility between cows. Cows in cluster L had lower CH4/kg energy corrected milk (ECM) compared to cows in cluster H, 8.3 compared to 9.7 g CH4/kg ECM, showing that low CH4 cows utilized the feed more efficient for milk production which might indicate a more efficient microbial population or host genetic differences that is reflected in bacterial and archaeal (or methanogens) populations. PMID:28261182

SOIL FUMIGATION WITHIN MONOCULTURE AND ROTATIONS: RESPONSE OF CORN AND MYCORRIHZAE

EPA Science Inventory

The causative factors for corn (Zea mays L.) response to methyl bromide (CH₃Br) fumigation, in the absence of known specific pathogens, are unknown. This study was conducted to determine if deleterious nonspecific rhizosphere microorganisms are the causative age...

Aminobacter ciceronei sp. nov. and Aminobacter lissarensis sp. nov., isolated from various terrestrial environments

USGS Publications Warehouse

McDonald, I.R.; Kampfer, P.; Topp, E.; Warner, K.L.; Cox, M.J.; Connell, Hancock T.L.; Miller, L.G.; Larkin, M.J.; Ducrocq, V.; Coulter, C.; Harper, D.B.; Murrell, J.C.; Oremland, R.S.

2005-01-01

The bacterial strains IMB-1T and CC495T, which are capable of growth on methyl chloride (CH3Cl, chloromethane) and methyl bromide (CH3Br, bromomethane), were isolated from agricultural soil in California fumigated with CH3Br, and woodland soil in Northern Ireland, respectively. Two pesticide- /herbicide-degrading bacteria, strains ER2 and C147, were isolated from agricultural soil in Canada. Strain ER2 degrades N-methyl carbamate insecticides, and strain C147 degrades triazine herbicides widely used in agriculture. On the basis of their morphological, physiological and genotypic characteristics, these four strains are considered to represent two novel species of the genus Aminobacter, for which the names Aminobacter ciceronei sp. nov. (type strain IMB-1T=ATCC 202197T=CIP 108660T=CCUG 50580T; strains ER2 and C147) and Aminobacter lissarensis sp. nov. (type strain CC495T=NCIMB 13798T=CIP 108661T=CCUG 50579T) are proposed. ?? 2005 IUMS.

Band Structure Engineering of Cs2AgBiBr6 Perovskite through Order-Disordered Transition: A First-Principle Study.

PubMed

Yang, Jingxiu; Zhang, Peng; Wei, Su-Huai

2018-01-04

Cs 2 AgBiBr 6 was proposed as one of the inorganic, stable, and nontoxic replacements of the methylammonium lead halides (CH 3 NH 3 PbI 3 , which is currently considered as one of the most promising light-harvesting material for solar cells). However, the wide indirect band gap of Cs 2 AgBiBr 6 suggests that its application in photovoltaics is limited. Using the first-principle calculation, we show that by controlling the ordering parameter at the mixed sublattice, the band gap of Cs 2 AgBiBr 6 can vary continuously from a wide indirect band gap of 1.93 eV for the fully ordered double-perovskite structure to a small pseudodirect band gap of 0.44 eV for the fully random alloy. Therefore, one can achieve better light absorption simply by controlling the growth temperature and thus the ordering parameters and band gaps. We also show that controlled doping in Cs 2 AgBiBr 6 can change the energy difference between ordered and disordered Cs 2 AgBiBr 6 , thus providing further control of the ordering parameters and the band gaps. Our study, therefore, provides a novel approach to carry out band structure engineering in the mixed perovskites for optoelectronic applications.

Effect of substituent groups (R= sbnd CH3, sbnd Br and sbnd CF3) on the structure, stability and redox property of [Cr(R-pic)2(H2O)2]NO3·H2O complexes

NASA Astrophysics Data System (ADS)

Chai, Jie; Liu, Yanfei; Liu, Bin; Yang, Binsheng

2017-12-01

Complexes [Cr(3-CH3-pic)2(H2O)2]NO3·H2O (1), [Cr(5-Br-pic)2(H2O)2]NO3·H2O (2) and [Cr(5-CF3-pic)2(H2O)2]NO3·H2O (3) were synthesized (pic = pyridine-2-carboxylic acid) and characterized by X-ray crystal diffraction. Crystal structure indicates that two bidentate ligands occupy equatorial position and two H2O occupy axial positions in trans-configuration. (i) Decomposition of complexes 1, 2 and 3 in different medium (phosphate buffered saline (PBS), apo-ovotransferrin (apootf) and EDTA) indicates that decomposition rate constants of these complexes follow the sequence of 1 < 2 < 3. (ii) The redox potential of Cr(III)/Cr(II) by cyclic voltammetry follows the sequence of 1 (-1.20 V) > 3 (-1.29 V) > 2 (-1.31 V). (iii) In addition, ·OH-generation of the new synthesized complexes was determined by Fenton-like reaction in comparison with Cr(pic)3, and it may be related to the reduction potential of the complexes. (iv) Moreover, Hammett substituent constants σp (inductive) and σm (resonance) (R = 3-CH3, 5-Br, 5-CF3) were introduced to evaluate the impact of substituent groups on the bond length and decomposition kinetics. The substituent group on the ligand has great effect on the properties of the complexes.

Reactions of the linear tetranuclear complex Ru sub 4 (CO) sub 10 (CH sub 3 C double bond C(H)C(H) double bond N-i-Pr) sub 2 with oxidizing reagents. Syntheses of halide-bridged (Ru(CO) sub 2 X(CH sub 3 C double bond C(H)C(H) double bond N-i-Pr)) sub 2 and fac-Ru(CO) sub 3 X(CH sub 3 C double bond C(H)C(H) double bond N-i-Pr)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mul, W.P.; Elsevier, C.J.; van Leijen, M.

1991-01-01

The linear tetranuclear complex Ru{sub 4}(CO){sub 10}(CH{sub 3}C{double bond}C(H)C(H){double bond}N-i-Pr){sub 2} (1), containing two {eta}{sup 5}-azaruthenacyclopentadienyl systems, reacts with oxidizing reagents (I{sub 2}, Br{sub 2}, NBS, CCl{sub 4}) at elevated temperatures (40-90C) in heptane or benzene to give the new dimeric halide-bridged organoruthenium(II) complexes (Ru(CO){sub 2}X(CH{sub 3}C{double bond}C(H)C(H){double bond}N-i-Pr)){sub 2} (X = I (3a), X = Br (3b), Cl (3c); yield 30-80%) together with (Ru(CO){sub 3}X{sub 2}){sub 2}. The reactions of 1 with CX{sub 4} (X = I, Br, Cl) are accelerated by CO, probably because Ru{sub 4}(CO){sub 12}(CH{sub 3}C{double bond}C(H)C(H){double bond}N-i-Pr){sub 2} (5), which contains two unbridged metal-metal bonds,more » is formed prior to oxidation. The halide-bridged dimers 3a-c are obtained as mixtures of four isomers, the configurations of which are discussed. Splitting of the halide bridges takes place when a solution of 3a-c is saturated with CO, whereby mononuclear fac-Ru(CO){sub 3}X(CH{sub 3}C{double bond}C(H)C(H){double bond}N-i-Pr) (4a-c) is obtained. This process is reversible; ie., passing a stream of nitrogen through a solution of 4a-c or removal of the solvent under vacuum causes the reverse reaction with reformation of 3a-c. Compounds 3a-c and 4a-c have been characterized by IR (3, 4), FD mass (3), {sup 1}H (3, 4), and {sup 13}C{l brace}H{r brace} NMR (4) spectroscopy and satisfactory elemental analyses have been obtained for 3a-c. Compounds 3 and 4 are suitable precursors for the preparation of new homo- and heteronuclear transition-metal complexes.« less

The influence of the relative thermal expansion and electric permittivity on phase transitions in the perovskite-type bidimensional layered NH3(CH2)3NH3CdBr4 compound

NASA Astrophysics Data System (ADS)

Staśkiewicz, Beata; Staśkiewicz, Anna

2017-07-01

Hydrothermal method has been used to synthesized the layered hybrid compound NH3(CH2)3NH3CdBr4 of perovskite architecture. Structural, dielectric and dilatometric properties of the compound have been analyzed. Negative thermal expansion (NTE) effect in the direction perpendicular to the perovskite plane as well as an unusual phase sequence have been reported based on X-ray diffraction analysis. Electric permittivity measurements evidenced the phase transitions at Tc1=326/328 K and Tc2=368/369 K. Relative linear expansion measurements almost confirmed these temperatures of phase transitions. Anomalies of electric permittivity and expansion behavior connected with the phase transitions are detected at practically the same temperatures as those observed earlier in differential scanning calorimetry (DSC), infrared (IR), far infrared (FIR) and Raman spectroscopy studies. Mechanism of the phase transitions is explained. Relative linear expansion study was prototype to estimate critical exponent value β for continuous phase transition at Tc1. It has been inferred that there is a strong interplay between the distortion of the inorganic network, those hydrogen bonds and the intermolecular interactions of the organic component.

Simulation calculations of efficiencies and silicon consumption for CH3NH3PbI3-x-y Br x Cl y /crystalline silicon tandem solar cells

NASA Astrophysics Data System (ADS)

Zhang, Lili; Xie, Ziang; Tian, Fuyang; Qin, Guogang

2017-04-01

Much attention has been paid to two-subcell tandem solar cells (TSCs) with crystalline silicon (c-Si) as the bottom cell (TSC-Si). Previous works have pointed out that the optimal band gap, E g, of the top cell material for a TSC-Si is around 1.75 eV. With a tunable E g and better stability than MAPbI3 (MA  =  CH3NH3), MAPbI3-x-y Br x Cl y is a promising candidate for the top cell material of a TSC-Si. In this work, calculations concerning the E g, refractive index and extinction coefficient of MAPbI3-x-y Br x Cl y are performed using first-principles calculations including the spin-orbit coupling (SOC) effect. MAPbI3-x-y Br x Cl y with five sets of x and y, which have a E g around 1.75 eV, are obtained. On this basis, absorption of the perovskite top cell is calculated applying the Lambert-Beer model (LBM) and the transfer matrix model (TMM), respectively. Considering the Auger recombination in the c-Si bottom cell and radiation coupling between the two subcells, the efficiencies for MAPbI3-x-y Br x Cl y /c-Si TSCs with the five sets of x and y are calculated. Among them, the MAPbI2.375Br0.5Cl0.125/c-Si TSC achieves the highest efficiency of 35.1% with a 440 nm thick top cell and 50 µm thick c-Si when applying the LBM. When applying the TMM, the highest efficiency of 32.5% is predicted with a 580 nm thick MAPbI2.375Br0.5Cl0.125 top cell and 50 µm thick c-Si. Compared with the limiting efficiency of 27.1% for a 190 µm thick c-Si single junction solar cell (SC), the MAPbI2.375Br0.5Cl0.125/c-Si TSC shows a superior performance of high efficiency and low c-Si consumption.

Facile fabrication of large-grain CH3NH3PbI3−xBrx films for high-efficiency solar cells via CH3NH3Br-selective Ostwald ripening

PubMed Central

Yang, Mengjin; Zhang, Taiyang; Schulz, Philip; Li, Zhen; Li, Ge; Kim, Dong Hoe; Guo, Nanjie; Berry, Joseph J.; Zhu, Kai; Zhao, Yixin

2016-01-01

Organometallic halide perovskite solar cells (PSCs) have shown great promise as a low-cost, high-efficiency photovoltaic technology. Structural and electro-optical properties of the perovskite absorber layer are most critical to device operation characteristics. Here we present a facile fabrication of high-efficiency PSCs based on compact, large-grain, pinhole-free CH3NH3PbI3−xBrx (MAPbI3−xBrx) thin films with high reproducibility. A simple methylammonium bromide (MABr) treatment via spin-coating with a proper MABr concentration converts MAPbI3 thin films with different initial film qualities (for example, grain size and pinholes) to high-quality MAPbI3−xBrx thin films following an Ostwald ripening process, which is strongly affected by MABr concentration and is ineffective when replacing MABr with methylammonium iodide. A higher MABr concentration enhances I–Br anion exchange reaction, yielding poorer device performance. This MABr-selective Ostwald ripening process improves cell efficiency but also enhances device stability and thus represents a simple, promising strategy for further improving PSC performance with higher reproducibility and reliability. PMID:27477212

Alkylating Derivatives of Vitamin D Hormone for Prostate Cancer

DTIC Science & Technology

2006-10-01

Acetic Anhydride / Pyridine/ 40C 1. UV / Toluene 2. EtOH - Reflux TBDMSCl / Imidazole /DMF BrCH2COOH / DCC / DMAP / CH2Cl2 1,25(OH)2D3-3-BE Figure 1...BE OH SO2 OTBDMS OH OTBDMS 1. Liq. SO2 / Reflux 2. TBDMSCl / Imidazole /DMF NaHCO3 / EtOH / Reflux NMO / SeO2 / CH2Cl2 / Reflux OH OTBDMSHO OTHP...containing 200 mg of 25-hydroxyvitamin D3 in a flask fitted with a trap that was cooled with dry ice-acetone (-780C). The yellow solution was refluxed

Influence of halide composition on the structural, electronic, and optical properties of mixed CH3NH3Pb (I1-xBrx) 3 perovskites calculated using the virtual crystal approximation method

NASA Astrophysics Data System (ADS)

Jong, Un-Gi; Yu, Chol-Jun; Ri, Jin-Song; Kim, Nam-Hyok; Ri, Guk-Chol

2016-09-01

Extensive studies have demonstrated the promising capability of the organic-inorganic hybrid halide perovskite CH3NH3PbI3 in solar cells with a high power conversion efficiency exceeding 20%. However, the intrinsic as well as extrinsic instabilities of this material remain the major challenge to the commercialization of perovskite-based solar cells. Mixing halides is expected to resolve this problem. Here, we investigate the effect of chemical substitution in the position of the halogen atom on the structural, electronic, and optical properties of mixed halide perovskites CH3NH3Pb (I1-xBrx) 3 with a pseudocubic phase using the virtual crystal approximation method within density functional theory. With an increase of Br content x from 0.0 to 1.0, the lattice constant decreases in proportion to x with the function of a (x )=6.420 -0.333 x (Å), while the band gap and the exciton binding energy increase with the quadratic function of Eg(x ) =1.542 +0.374 x +0.185 x2 (eV) and the linear function of Eb(x ) =0.045 +0.057 x (eV), respectively. The photoabsorption coefficients are also calculated, showing a blueshift of the absorption onsets for higher Br contents. We calculate the phase decomposition energy of these materials and analyze the electronic charge density difference to estimate the material stability. Based on the calculated results, we suggest that the best match between efficiency and stability can be achieved at x ≈0.2 in CH3NH3Pb (I1-xBrx) 3 perovskites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fu, H.B.; Hu, Y.J.; Bernstein, E.R.

Small methanol clusters are formed by expanding a mixture of methanol vapor seeded in helium and are detected using vacuum UV (vuv) (118 nm) single-photon ionization/linear time-of-flight mass spectrometer (TOFMS). Protonated cluster ions, (CH{sub 3}OH){sub n-1}H{sup +} (n=2-8), formed through intracluster ion-molecule reactions following ionization, essentially correlate to the neutral clusters, (CH{sub 3}OH){sub n}, in the present study using 118 nm light as the ionization source. Both experimental and Born-Haber calculational results clarify that not enough excess energy is released into protonated cluster ions to initiate further fragmentation in the time scale appropriate for linear TOFMS. Size-specific spectra for (CH{submore » 3}OH){sub n} (n=4 to 8) clusters in the OH stretch fundamental region are recorded by IR+vuv (118 nm) nonresonant ion-dip spectroscopy through the detection chain of IR multiphoton predissociation and subsequent vuv single-photon ionization. The general structures and gross features of these cluster spectra are consistent with previous theoretical calculations. The lowest-energy peak contributed to each cluster spectrum is redshifted with increasing cluster size from n=4 to 8, and limits near {approx}3220 cm{sup -1} in the heptamer and octamer. Moreover, IR+vuv nonresonant ionization detected spectroscopy is employed to study the OH stretch first overtone of the methanol monomer. The rotational temperature of the clusters is estimated to be at least 50 K based on the simulation of the monomer rotational envelope under clustering conditions.« less

Durable Fluorocarbon-Based Coatings for Aircraft

DTIC Science & Technology

2000-11-01

synthesized two novel monomers, 2-fluoro-2- perfluorooctyl - 1,3-propanediol and 2-fluoro-2- perfluoro (2-ethylhexyl)-1,3-propanediol, and demonstrated that...propanediols, two branched perfluoroalkyl methanols, perfluoro -1H,1H-2-ethylhexanol (pefluoro-1-ethylpentyl methanol) and perfluoro - 1H,1H-2,2...malonates. Reduction of the perfluorinated malonates gave the perfluoroalkyl -branched 1,3-propanediols. R-OH + HBr R-Br cat. O O OCH 2CH3 OCH 2CH3 + O O

Influence of ionic liquids on the syntheses and structures of Mn(II) coordination polymers based on multidentate N-heterocyclic aromatic ligands and bridging carboxylate ligands.

PubMed

Qin, Jian-Hua; Wang, Hua-Rui; Pan, Qi; Zang, Shuang-Quan; Hou, Hongwei; Fan, Yaoting

2015-10-28

Seven Mn(ii) coordination polymers, namely {[Mn2(ptptp)Cl2(H2O)3]·H2O}n (1), {[Mn(μ-ptptp)3]2[Mn3(μ3-Cl)]2}·2Cl·16H2O (2), {[Mn2(ptptp)(ip)2(H2O)3]·H2O}n (3), {[Mn2(ptptp)(5-CH3-ip)2(H2O)3]·H2O}n (4), {[Mn4(ptptp)(5-Br-ip)3(H2O)3]·4H2O}n (5), {[Mn2(ptptp)(Hbtc)(H2O)2]·2H2O}n (6) and {[Mn2(ptptp)(tdc)(H2O)2]·1.5H2O}n (7), have been prepared based on multidentate N-heterocyclic aromatic ligands and bridging carboxylate ligands (H2ptptp = 2-(5-{6-[5-(pyrazin-2-yl)-1H-1,2,4-triazol-3-yl]pyridin-2-yl}-1H-1,2,4-triazol-3-yl)pyrazine; R-isophthalic acids, H2ip-R: R = -H (3), -CH3 (4), -Br (5); H3btc = trimesic acid (6); H2tdc = thiophene-2,5-dicarboxylic acid (7)), in order to further probe the multiple roles of [RMI]Br ionic liquids in the hydro/solvothermal synthesis (RMI = 1-alkyl-3-methylimidazolium, R = ethyl, or propyl, or butyl). The successful syntheses of complexes 2-6 suggest that in hydro/solvothermal synthesis the addition of a small amount of [RMI]Br plays a crucial role. Complex 1 exhibits single right-handed helices constructed by ptptp ligands and Mn(ii) ions. Complex 2 possesses octanuclear helicate structures in which two propeller-shaped [Mn(μ-ptptp)3](4-) units embrace two [Mn3(μ3-Cl)](5+) cluster cores inside. Complexes 3 and 4 are isostructural and display a 1D double chain formed by two kinds of pseudo meso-helices: (Mn-ptptp)n and (Mn-5-R-ip)n. Complex 5 has a 2D structure containing 1D Mn(ii) ion chains formed through carboxylates and [ptptp](2-)-N,N bridges. Complex 6 shows a 2D structure formed by a meso-helix (Mn-ptptp)n and the partly deprotonated Hbtc ligands. Complex 7 features a heterochiral [2 + 2] coaxially nested double-helical column formed by using the outer double-helices (Mn-ptptp)n as a template to encapsulate the inner double-helices (Mn-tdc)n with opposite orientation. All complexes were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, single-crystal X-ray crystallography and powder X-ray diffraction. The magnetic properties of 1-7 were also investigated.

Ion-Ice Astrochemistry: Barrierless Low-Energy Deposition Pathways to HCOOH, CH3OH, and CO2 on Icy Grain Mantles from Precursor Cations

NASA Technical Reports Server (NTRS)

Woon, David E.

2011-01-01

A new family of very favorable reaction pathways is explored involving the deposition of ions on icy grain mantles with very low energies. Quantum chemical cluster calculations at the MP2/6-31+G** level in 4H2O clusters and at the B3LYP/6-31+G** level in 17H2O clusters indicate that HCO+ and CH3 + are able to react spontaneously with one of the water molecules in the cluster to form protonated formic acid (HCOOH2 +) and protonated methanol (CH3OH2 +), respectively. It is furthermore found that these initial adducts spontaneously transfer their excess protons to the cluster to form neutral formic acid and methanol, plus solvated hydronium, H3O+. In the final case, if a CO molecule is bound to the surface of the cluster, OH+ may react with it to form protonated carbon dioxide (HCO2 +), which then loses its proton to yield CO2 and H3O+. In the present model, all of these processes were found to occur with no barriers. Discussion includes the analogous gas phase processes, which have been considered in previous studies, as well as the competitive abstraction pathway for HCO(+) + H2O.

Distributed Feedback Laser Based on Single Crystal Perovskite

NASA Astrophysics Data System (ADS)

Sun, Shang; Xiao, Shumin; Song, Qinghai

2017-06-01

We demonstrate a single crystal perovskite based, with grating-structured photoresist on top, highly polarized distributed feedback laser. A lower laser threshold than the Fabry-Perot mode lasers from the same single crystal CH3NH3PbBr3 microplate was obtained. Single crystal CH3NH3PbBr3 microplates was synthesized with one-step solution processed precipitation method. Once the photoresist on top of the microplate was patterned with electron beam, the device was realized. This one-step fabrication process utilized the advantage of single crystal to the greatest extend. The ultra-low defect density in single crystalline microplate offer an opportunity for lower threshold lasing action compare with poly-crystal perovskite films. In the experiment, the lasing action based on the distributed feedback grating design was found with lower threshold and higher intensity than the Fabry-Perot mode lasers supported by the flat facets of the same microplate.

Grain Size Modulation and Interfacial Engineering of CH3 NH3 PbBr3 Emitter Films through Incorporation of Tetraethylammonium Bromide.

PubMed

Jamaludin, Nur Fadilah; Yantara, Natalia; Ng, Yan Fong; Li, Mingjie; Goh, Teck Wee; Thirumal, Krishnamoorthy; Sum, Tze Chien; Mathews, Nripan; Soci, Cesare; Mhaisalkar, Subodh

2018-05-07

Metal halide perovskites have demonstrated breakthrough performances as absorber and emitter materials for photovoltaic and display applications respectively. However, despite the low manufacturing cost associated with solution-based processing, the propensity for defect formation with this technique has led to an increasing need for defect passivation. Here, we present an inexpensive and facile method to remedy surface defects through a postdeposition treatment process using branched alkylammonium cation species. The simultaneous realignment of interfacial energy levels upon incorporation of tetraethylammonium bromide onto the surface of CH 3 NH 3 PbBr 3 films contributes favorably toward the enhancement in overall light-emitting diode characteristics, achieving maximum luminance, current efficiency, and external quantum efficiency values of 11 000 cd m -2 , 0.68 cd A -1 , and 0.16 %, respectively. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Anionic Hosts for the Incorporation of Cationic Guests

PubMed Central

Peresypkina, Eugenia; Heindl, Claudia; Virovets, Alexander; Brake, Helena; Mädl, Eric

2018-01-01

Abstract Pentaphosphaferrocene [Cp*Fe(η5‐P5)] (1 a) represents an excellent building block for the template‐directed synthesis of spherical supramolecules. Here, the self‐assembly of 1 a with CuI and CuII halides in the presence of the template complexes [FeCp2][PF6], [CoCp2][PF6] and [CoCp2] is reported, testifying to the redox behavior of the formed supramolecules. The oxidation or reduction capacity of these reactive complexes does not inhibit their template impact and, for the first time, the cationic metallocene [CoCp2]+ is enclosed in unprecedented anionic organometallic hosts. Furthermore, the large variety of structural motifs, as icosahedral, trigonal antiprismatic, cuboidal and tetragonal antiprismatic arrangements of 1 a units are realized in the supramolecules [FeCp2]@[{1 a}12(CuBr)17.3] (3), [CoCp2]+ 3{[CoCp2]+@[{1 a}8Cu24.25Br28.25(CH3CN)6]4−} (4), {[Cp2Co]+@[{1 a}8(CuI)28 (CH3CN)9.8]}{[Cp2Co]+@[{1 a)}8Cu24.4I26.4(CH3CN)8]2−} (5), and [{1 a}3{(1 a)2NH}3Cu16I10(CH3CN)7] (6), respectively. PMID:29236336

A multi-model intercomparison of halogenated very short-lived substances (TransCom-VSLS): linking oceanic emissions and tropospheric transport for a reconciled estimate of the stratospheric source gas injection of bromine

NASA Astrophysics Data System (ADS)

Hossaini, R.; Patra, P. K.; Leeson, A. A.; Krysztofiak, G.; Abraham, N. L.; Andrews, S. J.; Archibald, A. T.; Aschmann, J.; Atlas, E. L.; Belikov, D. A.; Bönisch, H.; Carpenter, L. J.; Dhomse, S.; Dorf, M.; Engel, A.; Feng, W.; Fuhlbrügge, S.; Griffiths, P. T.; Harris, N. R. P.; Hommel, R.; Keber, T.; Krüger, K.; Lennartz, S. T.; Maksyutov, S.; Mantle, H.; Mills, G. P.; Miller, B.; Montzka, S. A.; Moore, F.; Navarro, M. A.; Oram, D. E.; Pfeilsticker, K.; Pyle, J. A.; Quack, B.; Robinson, A. D.; Saikawa, E.; Saiz-Lopez, A.; Sala, S.; Sinnhuber, B.-M.; Taguchi, S.; Tegtmeier, S.; Lidster, R. T.; Wilson, C.; Ziska, F.

2016-07-01

The first concerted multi-model intercomparison of halogenated very short-lived substances (VSLS) has been performed, within the framework of the ongoing Atmospheric Tracer Transport Model Intercomparison Project (TransCom). Eleven global models or model variants participated (nine chemical transport models and two chemistry-climate models) by simulating the major natural bromine VSLS, bromoform (CHBr3) and dibromomethane (CH2Br2), over a 20-year period (1993-2012). Except for three model simulations, all others were driven offline by (or nudged to) reanalysed meteorology. The overarching goal of TransCom-VSLS was to provide a reconciled model estimate of the stratospheric source gas injection (SGI) of bromine from these gases, to constrain the current measurement-derived range, and to investigate inter-model differences due to emissions and transport processes. Models ran with standardised idealised chemistry, to isolate differences due to transport, and we investigated the sensitivity of results to a range of VSLS emission inventories. Models were tested in their ability to reproduce the observed seasonal and spatial distribution of VSLS at the surface, using measurements from NOAA's long-term global monitoring network, and in the tropical troposphere, using recent aircraft measurements - including high-altitude observations from the NASA Global Hawk platform. The models generally capture the observed seasonal cycle of surface CHBr3 and CH2Br2 well, with a strong model-measurement correlation (r ≥ 0.7) at most sites. In a given model, the absolute model-measurement agreement at the surface is highly sensitive to the choice of emissions. Large inter-model differences are apparent when using the same emission inventory, highlighting the challenges faced in evaluating such inventories at the global scale. Across the ensemble, most consistency is found within the tropics where most of the models (8 out of 11) achieve best agreement to surface CHBr3 observations using the lowest of the three CHBr3 emission inventories tested (similarly, 8 out of 11 models for CH2Br2). In general, the models reproduce observations of CHBr3 and CH2Br2 obtained in the tropical tropopause layer (TTL) at various locations throughout the Pacific well. Zonal variability in VSLS loading in the TTL is generally consistent among models, with CHBr3 (and to a lesser extent CH2Br2) most elevated over the tropical western Pacific during boreal winter. The models also indicate the Asian monsoon during boreal summer to be an important pathway for VSLS reaching the stratosphere, though the strength of this signal varies considerably among models. We derive an ensemble climatological mean estimate of the stratospheric bromine SGI from CHBr3 and CH2Br2 of 2.0 (1.2-2.5) ppt, ˜ 57 % larger than the best estimate from the most recent World Meteorological Organization (WMO) Ozone Assessment Report. We find no evidence for a long-term, transport-driven trend in the stratospheric SGI of bromine over the simulation period. The transport-driven interannual variability in the annual mean bromine SGI is of the order of ±5 %, with SGI exhibiting a strong positive correlation with the El Niño-Southern Oscillation (ENSO) in the eastern Pacific. Overall, our results do not show systematic differences between models specific to the choice of reanalysis meteorology, rather clear differences are seen related to differences in the implementation of transport processes in the models.

4-Alkynylphenylsilatranes: Insecticidal activity, mammalian toxicity, and mode of action

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horsham, M.A.; Palmer, C.J.; Cole, L.M.

1990-08-01

4-Ethynyl- and 4-(prop-1-ynyl)phenylsilatranes (N(CH{sub 2}CH{sub 2}O){sub 3}SiR, R = C{sub 6}H{sub 4}-4-C{triple bond}CH or C{sub 6}H{sub 4}-4-C{triple bond}CCH{sub 3}) are highly toxic to houseflies (pretreated with piperonyl butoxide) and milkweed bugs (topical LD{sub 50}s 3-14 {mu}g/g) and to mice (intraperitoneal LD{sub 50}s 0.4-0.9 mg/kg), and they are moderately potent inhibitors of the ({sup 35}S)-tert-butylbicyclophosphorothionate or TBPS binding site (GABA-gated chloride channel) of mouse brain membranes. Scatchard analysis indicates noncompetitive interaction of 4-ethynylphenylsilatrane with the TBPS binding site. Phenylsilatrane analogues with 4-substituents of H, CH{sub 3}, Cl, Br, and C{triple bond}CSi(CH{sub 3}){sub 3} are highly toxic to mice but have littlemore » or no activity in the insect and receptor assays. Radioligand binding studies with (4-{sup 3}H)phenylsilatrane failed to reveal a specific binding site in mouse brain. Silatranes with R = H, CH{sub 3}, CH{sub 2}Cl, CH{double bond}CH{sub 2}, OCH{sub 2}CH{sub 3}, and C{sub 6}H{sub 4}-4-CH{sub 2}CH{sub 3} are of little or no activity in the insect and mouse toxicity and TBPS binding site assays as are the trithia and monocyclic analogues of phenylsilatrane. 4-Alkynylphenylsilatranes are new probes to examine the GABA receptor-ionophore complex of insects and mammals.« less

Electron–phonon coupling in hybrid lead halide perovskites

PubMed Central

Wright, Adam D.; Verdi, Carla; Milot, Rebecca L.; Eperon, Giles E.; Pérez-Osorio, Miguel A.; Snaith, Henry J.; Giustino, Feliciano; Johnston, Michael B.; Herz, Laura M.

2016-01-01

Phonon scattering limits charge-carrier mobilities and governs emission line broadening in hybrid metal halide perovskites. Establishing how charge carriers interact with phonons in these materials is therefore essential for the development of high-efficiency perovskite photovoltaics and low-cost lasers. Here we investigate the temperature dependence of emission line broadening in the four commonly studied formamidinium and methylammonium perovskites, HC(NH2)2PbI3, HC(NH2)2PbBr3, CH3NH3PbI3 and CH3NH3PbBr3, and discover that scattering from longitudinal optical phonons via the Fröhlich interaction is the dominant source of electron–phonon coupling near room temperature, with scattering off acoustic phonons negligible. We determine energies for the interacting longitudinal optical phonon modes to be 11.5 and 15.3 meV, and Fröhlich coupling constants of ∼40 and 60 meV for the lead iodide and bromide perovskites, respectively. Our findings correlate well with first-principles calculations based on many-body perturbation theory, which underlines the suitability of an electronic band-structure picture for describing charge carriers in hybrid perovskites. PMID:27225329

Volatilization Mechanism of 1-Ethyl-3-methylimidazolium Bromide Ionic Liquid (Briefing Charts)

DTIC Science & Technology

2012-04-01

bromides and alkylimidazoles, presumably through alkyl abstraction via an SN2 type mechanism, and that vaporization of intact ion pairs or the formation...116.1±6.6 kJ/mol and H.‡(CH3CH2Br) = 122.9±7.2 kJ/mol, and the results are found to be in agreement with calculated values for the SN2 reactions

Polymer-Nanoparticle Hybrid Photovoltaic Research for U.S. Air Force Applications

DTIC Science & Technology

2010-01-06

6 S S O S S O II xi xiviii xii (69%) (93%) (64%) (92%) 4S SBr Br S S OO OO II S S OO aReagents and Conditions: i.THF, n- BuLi , C6H13Br, -78oC, ii...CHCl3, FeCl3 (cat.), Br2, iii. THF, n- BuLi , B(OBu)3, -78oC, 2 M HCl, iv. Toluene, 1,3-propandiol, Reflux, v. (a) Ether, n- BuLi -78oC, (b) 3...thiophenecarboxaldehyde, vi. (a) n- BuLi (2eqiv.), -23oC, I2 (3eqiv.), (b) Na2SO3 and HI solun, vii. CH2Cl2, P.C.C, r.t, viii. Cu, DMF, Reflux, ix

Highly Stable, New, Organic-Inorganic Perovskite (CH3 NH3 )2 PdBr4 : Synthesis, Structure, and Physical Properties.

PubMed

Liu, Xixia; Huang, Tang Jiao; Zhang, Liuyang; Tang, Baoshan; Zhang, Nengduo; Shi, Diwen; Gong, Hao

2018-04-03

Lead halide perovskites have attracted striking attention recently, due to their appealing properties. However, toxicity and stability are two main factors restricting their application. In this work, a less toxic and highly stable Pd-based hybrid perovskite was experimentally synthesized, after exploring different experimental conditions. This new hybrid organic-inorganic perovskite (CH 3 NH 3 ) 2 PdBr 4 was found to be an orthorhombic crystal (Cmce, Z=4) with lattice parameters a=8.00, b=7.99, c=18.89 Å. The Cmce symmetry and lattice parameters were confirmed using Pawley refinement and the atoms positions were confirmed based on DFT calculation. This perovskite compound was determined to be a p-type semiconductor, with a resistivity of 102.9 kΩ cm, a carrier concentration of 3.4 ×10 12  cm -3 , and a mobility of 23.4 cm 2  (V s) -1 . Interestingly, XRD and UV/Vis measurements indicated that the phase of this new perovskite was maintained with an optical gap of 1.91 eV after leaving in air with a high humidity of 60 % for 4 days, and unchanged for months in N 2 atmosphere; much more stable than most existing organic-inorganic perovskites. The synthesis and various characterizations of this work further the understanding of this (CH 3 NH 3 ) 2 PdBr 4 organic-inorganic hybrid perovskite material. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Single-molecule magnet behavior in an octanuclear dysprosium(iii) aggregate inherited from helical triangular Dy3 SMM-building blocks.

PubMed

Zhang, Li; Zhang, Peng; Zhao, Lang; Wu, Jianfeng; Guo, Mei; Tang, Jinkui

2016-06-28

An unprecedented octanuclear dysprosium(iii) cluster with the formula [Dy8L6(μ3-OH)4(μ2-CH3O)2(CH3OH)6(H2O)2]·6H2O·10CH3OH·2CH3CN () based on a nonlinearly tritopic aroylhydrazone ligand H3L has been isolated, realizing the successful linking of pairwise interesting triangular Dy3 SMMs. It is noteworthy that two enantiomers (Λ and Δ configurations) individually behaving as a coordination-induced chirality presented in the Dy3 helicate are connected in the meso Dy8 cluster. Remarkably, alternating-current magnetic susceptibility measurements revealed that the Dy8 cluster shows typical SMM behavior inherited from its Dy3 helical precursor. It is one of the rare polynuclear Lnn SMMs (n > 7) under zero dc field.

The association between content of the elements S, Cl, K, Fe, Cu, Zn and Br in normal and cirrhotic liver tissue from Danes and Greenlandic Inuit examined by dual hierarchical clustering analysis.

PubMed

Laursen, Jens; Milman, Nils; Pind, Niels; Pedersen, Henrik; Mulvad, Gert

2014-01-01

Meta-analysis of previous studies evaluating associations between content of elements sulphur (S), chlorine (Cl), potassium (K), iron (Fe), copper (Cu), zinc (Zn) and bromine (Br) in normal and cirrhotic autopsy liver tissue samples. Normal liver samples from 45 Greenlandic Inuit, median age 60 years and from 71 Danes, median age 61 years. Cirrhotic liver samples from 27 Danes, median age 71 years. Element content was measured using X-ray fluorescence spectrometry. Dual hierarchical clustering analysis, creating a dual dendrogram, one clustering element contents according to calculated similarities, one clustering elements according to correlation coefficients between the element contents, both using Euclidian distance and Ward Procedure. One dendrogram separated subjects in 7 clusters showing no differences in ethnicity, gender or age. The analysis discriminated between elements in normal and cirrhotic livers. The other dendrogram clustered elements in four clusters: sulphur and chlorine; copper and bromine; potassium and zinc; iron. There were significant correlations between the elements in normal liver samples: S was associated with Cl, K, Br and Zn; Cl with S and Br; K with S, Br and Zn; Cu with Br. Zn with S and K. Br with S, Cl, K and Cu. Fe did not show significant associations with any other element. In contrast to simple statistical methods, which analyses content of elements separately one by one, dual hierarchical clustering analysis incorporates all elements at the same time and can be used to examine the linkage and interplay between multiple elements in tissue samples. Copyright © 2013 Elsevier GmbH. All rights reserved.

Methanogenic pathways in Alaskan peatlands at different trophic levels with evidence from stable isotope ratios and metagenomics

NASA Astrophysics Data System (ADS)

Zhang, L.; Liu, X.; Langford, L.; Chanton, J.; Roth, S.; Schaefer, J.; Barkay, T.; Hines, M. E.

2017-12-01

To better constrain the large uncertainties in emission fluxes, it is necessary to improve the understanding of methanogenic pathways in northern peatlands with heterogeneous surface vegetation and pH. Surface vegetation is an excellent indicator of porewater pH, which heavily influences the microbial communities in peatlands. Stable C isotope ratios (d13C) have been used as a robust tool to distinguish methanogenic pathways, especially in conjunction with metagenomic analysis of the microbial communities. To link surface vegetation species compositions, pH, microbial communities, and methanogenic pathways, 15 peatland sites were studied in Fairbanks and Anchorage, Alaska in the summer of 2014. These sites were ordinated using multiple factor analysis into 3 clusters based on pH, temp, CH4 and volatile fatty acid production rates, d13C values, and surface vegetation composition. In the ombrotrophic group (pH 3.3), various Sphagna species dominanted, but included shrubs Ledum decumbens and Eriophorum vaginatum. Primary fermentation rates were slow with no CH4 detected. The fen cluster (pH 5.3) was dominated by various Carex species, and CH4 production rates were lower than those in the intermediate cluster but more enriched in 13C (-49‰). Methanosaeta and Methanosarcina were the dominant methanogens. In the intermediate trophic level (pH 4.7), Sphagnum squarrosum and Carex aquatilis were abundant. The same methanogens as in fen cluster also dominated this group, but with higher abundances, which, in part, lead to the higher CH4 production rates in this cluster. The syntrophs Syntrophobacter and Pelobacter were also more abundant than the fen sites, which may explain the d13CH4 values that were the lighetest among the three clusters (-54‰). The high methanogenic potential in the intermediate trophic sites warrant further study since they are not only present in large areas currently, but also represent the transient stage during the evolution from bog to fen in projected climate change scenarios.

'Pincer' dicarbene complexes of some early transition metals and uranium.

PubMed

Pugh, David; Wright, Joseph A; Freeman, Sandra; Danopoulos, Andreas A

2006-02-14

The complexes [(C-N-C)MX(n)(thf)(m)] with the 'pincer' 2,6-bis(imidazolylidene)pyridine, (C-N-C) = 2,6-bis(arylimidazol-2-ylidene)pyridine, aryl = 2,6-Pr(i)2C6H3, M = V, X = Cl, n = 2, m = 1 1a; M = Cr, X = Cl, n = 2, m = 0, 2a, X = Br, 2b; M = Mn, X = Br, n = 2, m = 0, 3; M = Nb, X = Cl, n = 3, m = 0, 4; and M = U, X = Cl, n = 4, m = 0, 5, were synthesised by (a) substitution of labile tmed (1a), thf (2a, 3, 5) or dme (4) by free (C-N-C) or by (b) reaction of the bisimidazolium salt (CH-N-CH)Br2 with {Cr[N(SiMe3)2]2(thf)2} followed by amine elimination (2b). Attempted alkylation of 1a, 2, 3a and 4 with Grignard or alkyl lithiums gave intractable mixtures, and in one case [reaction of 1a with (mesityl)MgBr] resulted in exchange of Cl by Br (1b). Oxidation of 1a or [(C-N-C)VCl3] with 4-methylmorpholine N-oxide afforded the trans-V(C-N-C)(=O)Cl2, 6, which by reaction with AgBF4 in MeCN gave trans-[V(C-N-C)(=O)(MeCN)2][BF4]2, 7. Reaction of 1a with p-tolyl azide gave trans-V(C-N-C)(=N-p-tolyl)Cl2 8. The complex trans-Ti(C-N-C)(=NBu(t))Cl2, 9, was prepared by substitution of the pyridine ligands in Ti(NBu(t))Cl2(py)3 by C-N-C.

Carrier injection and recombination processes in perovskite CH3NH3PbI3 solar cells studied by electroluminescence spectroscopy

NASA Astrophysics Data System (ADS)

Handa, Taketo; Okano, Makoto; Tex, David M.; Shimazaki, Ai; Aharen, Tomoko; Wakamiya, Atsushi; Kanemitsu, Yoshihiko

2016-02-01

Organic-inorganic hybrid perovskite materials, CH3NH3PbX3 (X = I and Br), are considered as promising candidates for emerging thin-film photovoltaics. For practical implementation, the degradation mechanism and the carrier dynamics during operation have to be clarified. We investigated the degradation mechanism and the carrier injection and recombination processes in perovskite CH3NH3PbI3 solar cells using photoluminescence (PL) and electroluminescence (EL) imaging spectroscopies. By applying forward bias-voltage, an inhomogeneous distribution of the EL intensity was clearly observed from the CH3NH3PbI3 solar cells. By comparing the PL- and EL-images, we revealed that the spatial inhomogeneity of the EL intensity is a result of the inhomogeneous luminescence efficiency in the perovskite layer. An application of bias-voltage for several tens of minutes in air caused a decrease in the EL intensity and the conversion efficiency of the perovskite solar cells. The degradation mechanism of perovskite solar cells under bias-voltage in air is discussed.

Copper-Substituted Lead Perovskite Materials Constructed with Different Halides for Working (CH3NH3)2CuX4-Based Perovskite Solar Cells from Experimental and Theoretical View.

PubMed

Elseman, Ahmed Mourtada; Shalan, Ahmed Esmail; Sajid, Sajid; Rashad, Mohamed Mohamed; Hassan, Ali Mostafa; Li, Meicheng

2018-04-11

Toxicity and chemical instability issues of halide perovskites based on organic-inorganic lead-containing materials still remain as the main drawbacks for perovskite solar cells (PSCs). Herein, we discuss the preparation of copper (Cu)-based hybrid materials, where we replace lead (Pb) with nontoxic Cu metal for lead-free PSCs, and investigate their potential toward solar cell applications based on experimental and theoretical studies. The formation of (CH 3 NH 3 ) 2 CuX 4 [(CH 3 NH 3 ) 2 CuCl 4 , (CH 3 NH 3 ) 2 CuCl 2 I 2 , and (CH 3 NH 3 ) 2 CuCl 2 Br 2 ] was discussed in details. Furthermore, it was found that chlorine (Cl - ) in the structure is critical for the stabilization of the formed compounds. Cu-based perovskite-like materials showed attractive absorbance features extended to the near-infrared range, with appropriate band gaps. Green photoluminescence of these materials was obtained because of Cu + ions. The power conversion efficiency was measured experimentally and estimated theoretically for different architectures of solar cell devices.

Differences in clinical characteristics and frequency of accompanying migraine features in episodic and chronic cluster headache.

PubMed

Gaul, C; Christmann, N; Schröder, D; Weber, R; Shanib, H; Diener, H C; Holle, D

2012-05-01

Data on clinical differences between episodic (eCH) and chronic cluster headache (cCH) and accompanying migraine features are limited. History and clinical features of 209 consecutive cluster headache patients (144 eCH, 65 cCH; male:female ratio 3.4 : 1) were obtained in a tertiary headache centre by face-to-face interviews. Relationship between occurrence of accompanying symptoms, pain intensity, comorbid migraine, and circannual and circadian rhythmicity was analysed. 99.5% of patients reported a minimum of one ipsilateral cranial autonomic symptom (CAS); 80% showed at least three CAS. A seasonal rhythmicity was observed in both eCH and cCH. A comorbid headache disorder occurred in 25%. No significant difference was detected between patients with comorbid migraine and without regarding occurrence of phonophobia, photophobia or nausea during cluster attacks. Patients with comorbid migraine reported allodynia significantly (p = 0.022) more often during cluster attacks than patients without comorbid migraine. Occurrence of CAS and attack frequency, as well as periodic patterns of attacks, are relatively uniform in eCH and cCH. Multiple CAS are not related to pain intensity. Allodynia during cluster attacks is a frequent symptom. The unexpectedly high rate of accompanying migrainous features during cluster attacks cannot be explained by comorbid migraine.

Evaluating Global Emission Inventories of Biogenic Bromocarbons

NASA Technical Reports Server (NTRS)

Hossaini, Ryan; Mantle, H.; Chipperfield, M. P.; Montzka, S. A.; Hamer, P.; Ziska, F.; Quack, B.; Kruger, K.; Tegtmeier, S.; Atlas, E.;

Proton Transfers in a Channelrhodopsin-1 Studied by Fourier Transform Infrared (FTIR) Difference Spectroscopy and Site-directed Mutagenesis*

PubMed Central

Ogren, John I.; Yi, Adrian; Mamaev, Sergey; Li, Hai; Spudich, John L.; Rothschild, Kenneth J.

2015-01-01

Channelrhodopsin-1 from the alga Chlamydomonas augustae (CaChR1) is a low-efficiency light-activated cation channel that exhibits properties useful for optogenetic applications such as a slow light inactivation and a red-shifted visible absorption maximum as compared with the more extensively studied channelrhodopsin-2 from Chlamydomonas reinhardtii (CrChR2). Previously, both resonance Raman and low-temperature FTIR difference spectroscopy revealed that unlike CrChR2, CaChR1 under our conditions exhibits an almost pure all-trans retinal composition in the unphotolyzed ground state and undergoes an all-trans to 13-cis isomerization during the primary phototransition typical of other microbial rhodopsins such as bacteriorhodopsin (BR). Here, we apply static and rapid-scan FTIR difference spectroscopy along with site-directed mutagenesis to characterize the proton transfer events occurring upon the formation of the long-lived conducting P2380 state of CaChR1. Assignment of carboxylic C=O stretch bands indicates that Asp-299 (homolog to Asp-212 in BR) becomes protonated and Asp-169 (homolog to Asp-85 in BR) undergoes a net change in hydrogen bonding relative to the unphotolyzed ground state of CaChR1. These data along with earlier FTIR measurements on the CaChR1 → P1 transition are consistent with a two-step proton relay mechanism that transfers a proton from Glu-169 to Asp-299 during the primary phototransition and from the Schiff base to Glu-169 during P2380 formation. The unusual charge neutrality of both Schiff base counterions in the P2380 conducting state suggests that these residues may function as part of a cation selective filter in the open channel state of CaChR1 as well as other low-efficiency ChRs. PMID:25802337

Proton transfers in a channelrhodopsin-1 studied by Fourier transform infrared (FTIR) difference spectroscopy and site-directed mutagenesis.

PubMed

Ogren, John I; Yi, Adrian; Mamaev, Sergey; Li, Hai; Spudich, John L; Rothschild, Kenneth J

2015-05-15

Channelrhodopsin-1 from the alga Chlamydomonas augustae (CaChR1) is a low-efficiency light-activated cation channel that exhibits properties useful for optogenetic applications such as a slow light inactivation and a red-shifted visible absorption maximum as compared with the more extensively studied channelrhodopsin-2 from Chlamydomonas reinhardtii (CrChR2). Previously, both resonance Raman and low-temperature FTIR difference spectroscopy revealed that unlike CrChR2, CaChR1 under our conditions exhibits an almost pure all-trans retinal composition in the unphotolyzed ground state and undergoes an all-trans to 13-cis isomerization during the primary phototransition typical of other microbial rhodopsins such as bacteriorhodopsin (BR). Here, we apply static and rapid-scan FTIR difference spectroscopy along with site-directed mutagenesis to characterize the proton transfer events occurring upon the formation of the long-lived conducting P2 (380) state of CaChR1. Assignment of carboxylic C=O stretch bands indicates that Asp-299 (homolog to Asp-212 in BR) becomes protonated and Asp-169 (homolog to Asp-85 in BR) undergoes a net change in hydrogen bonding relative to the unphotolyzed ground state of CaChR1. These data along with earlier FTIR measurements on the CaChR1 → P1 transition are consistent with a two-step proton relay mechanism that transfers a proton from Glu-169 to Asp-299 during the primary phototransition and from the Schiff base to Glu-169 during P2 (380) formation. The unusual charge neutrality of both Schiff base counterions in the P2 (380) conducting state suggests that these residues may function as part of a cation selective filter in the open channel state of CaChR1 as well as other low-efficiency ChRs. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

Modulating Excitonic Recombination Effects through One-Step Synthesis of Perovskite Nanoparticles for Light-Emitting Diodes.

PubMed

Kulkarni, Sneha A; Muduli, Subas; Xing, Guichuan; Yantara, Natalia; Li, Mingjie; Chen, Shi; Sum, Tze Chien; Mathews, Nripan; White, Tim J; Mhaisalkar, Subodh G

2017-10-09

The primary advantages of halide perovskites for light-emitting diodes (LEDs) are solution processability, direct band gap, good charge-carrier diffusion lengths, low trap density, and reasonable carrier mobility. The luminescence in 3 D halide perovskite thin films originates from free electron-hole bimolecular recombination. However, the slow bimolecular recombination rate is a fundamental performance limitation. Perovskite nanoparticles could result in improved performance but processability and cumbersome synthetic procedures remain challenges. Herein, these constraints are overcome by tailoring the 3 D perovskite as a near monodisperse nanoparticle film prepared through a one-step in situ deposition method. Replacing methyl ammonium bromide (CH 3 NH 3 Br, MABr) partially by octyl ammonium bromide [CH 3 (CH 2 ) 7 NH 3 Br, OABr] in defined mole ratios in the perovskite precursor proved crucial for the nanoparticle formation. Films consisting of the in situ formed nanoparticles displayed signatures associated with excitonic recombination, rather than that of bimolecular recombination associated with 3 D perovskites. This transition was accompanied by enhanced photoluminescence quantum yield (PLQY≈20.5 % vs. 3.40 %). Perovskite LEDs fabricated from the nanoparticle films exhibit a one order of magnitude improvement in current efficiency and doubling in luminance efficiency. The material processing systematics derived from this study provides the means to control perovskite morphologies through the selection and mixing of appropriate additives. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

COMPARISON OF DETOXIFICATION AND BIOACTIVATION PATHWAYS FOR BROMODICHLOROMETHANE IN THE RAT

EPA Science Inventory

Comparison of Detoxification and Bioactivation pathways FOR Bromodichloromethane in the Rat
M.K. Ross1, C.R. Eklund2, and R.A. Pegram2
1Curriculum in Toxicology, UNC-CH, Chapel Hill, NC
2ETD, NHEERL/ORD, USEPA, Research Triangle Park, NC

Bromodichloromethane (BDCM...

IN VITRO METABOLISM OF PYRETHROIDS IN RAT LIVER MICROSOMES

EPA Science Inventory

IN VITRO METABOLISM OF PYRETHROIDS IN RAT LIVER MICROSOMES

SJ Godin1, RA Harrison2 MF. Hughes 2, MJ DeVito2; 1Curriculum In Toxicology, UNC-CH, Chapel Hill NC, USA; 2ETD, NHEERL, ORD, US EPA, RTP, NC, 27711, USA.

Pyrethroids are neurotoxic pesticides that bin...

In Situ Preparation of Metal Halide Perovskite Nanocrystal Thin Films for Improved Light-Emitting Devices.

PubMed

Zhao, Lianfeng; Yeh, Yao-Wen; Tran, Nhu L; Wu, Fan; Xiao, Zhengguo; Kerner, Ross A; Lin, YunHui L; Scholes, Gregory D; Yao, Nan; Rand, Barry P

2017-04-25

Hybrid organic-inorganic halide perovskite semiconductors are attractive candidates for optoelectronic applications, such as photovoltaics, light-emitting diodes, and lasers. Perovskite nanocrystals are of particular interest, where electrons and holes can be confined spatially, promoting radiative recombination. However, nanocrystalline films based on traditional colloidal nanocrystal synthesis strategies suffer from the use of long insulating ligands, low colloidal nanocrystal concentration, and significant aggregation during film formation. Here, we demonstrate a facile method for preparing perovskite nanocrystal films in situ and that the electroluminescence of light-emitting devices can be enhanced up to 40-fold through this nanocrystal film formation strategy. Briefly, the method involves the use of bulky organoammonium halides as additives to confine crystal growth of perovskites during film formation, achieving CH 3 NH 3 PbI 3 and CH 3 NH 3 PbBr 3 perovskite nanocrystals with an average crystal size of 5.4 ± 0.8 nm and 6.4 ± 1.3 nm, respectively, as confirmed through transmission electron microscopy measurements. Additive-confined perovskite nanocrystals show significantly improved photoluminescence quantum yield and decay lifetime. Finally, we demonstrate highly efficient CH 3 NH 3 PbI 3 red/near-infrared LEDs and CH 3 NH 3 PbBr 3 green LEDs based on this strategy, achieving an external quantum efficiency of 7.9% and 7.0%, respectively, which represent a 40-fold and 23-fold improvement over control devices fabricated without the additives.

Effect of halide-mixing on the switching behaviors of organic-inorganic hybrid perovskite memory

NASA Astrophysics Data System (ADS)

Hwang, Bohee; Gu, Chungwan; Lee, Donghwa; Lee, Jang-Sik

2017-03-01

Mixed halide perovskite materials are actively researched for solar cells with high efficiency. Their hysteresis which originates from the movement of defects make perovskite a candidate for resistive switching memory devices. We demonstrate the resistive switching device based on mixed-halide organic-inorganic hybrid perovskite CH3NH3PbI3-xBrx (x = 0, 1, 2, 3). Solvent engineering is used to deposit the homogeneous CH3NH3PbI3-xBrx layer on the indium-tin oxide-coated glass substrates. The memory device based on CH3NH3PbI3-xBrx exhibits write endurance and long retention, which indicate reproducible and reliable memory properties. According to the increase in Br contents in CH3NH3PbI3-xBrx the set electric field required to make the device from low resistance state to high resistance state decreases. This result is in accord with the theoretical calculation of migration barriers, that is the barrier to ionic migration in perovskites is found to be lower for Br- (0.23 eV) than for I- (0.29-0.30 eV). The resistive switching may be the result of halide vacancy defects and formation of conductive filaments under electric field in the mixed perovskite layer. It is observed that enhancement in operating voltage can be achieved by controlling the halide contents in the film.

The Synthesis of Carborane-Oxetane Monomers and their Polymerization

DTIC Science & Technology

1988-07-11

polyether glycol was liter demonstrated.’ During this time, " modified cationic polymerization technique was developef’, which allowed the synthesis of...Migration of these chemicals in the propellant grain is a continuous and serious problem. We proposed that a urethane curable polyether glycol with a...Br CH3 g 3 Cl CH3 This scheme has the advantage that the leaving group is not on the oxetane. Oxetane is a neopentyl type system which is typically

Size-restricted proton transfer within toluene-methanol cluster ions.

PubMed

Chiang, Chi-Tung; Shores, Kevin S; Freindorf, Marek; Furlani, Thomas; DeLeon, Robert L; Garvey, James F

2008-11-20

To understand the interaction between toluene and methanol, the chemical reactivity of [(C6H5CH3)(CH3OH) n=1-7](+) cluster ions has been investigated via tandem quadrupole mass spectrometry and through calculations. Collision Induced Dissociation (CID) experiments show that the dissociated intracluster proton transfer reaction from the toluene cation to methanol clusters, forming protonated methanol clusters, only occurs for n = 2-4. For n = 5-7, CID spectra reveal that these larger clusters have to sequentially lose methanol monomers until they reach n = 4 to initiate the deprotonation of the toluene cation. Metastable decay data indicate that for n = 3 and n = 4 (CH3OH)3H(+) is the preferred fragment ion. The calculational results reveal that both the gross proton affinity of the methanol subcluster and the structure of the cluster itself play an important role in driving this proton transfer reaction. When n = 3, the cooperative effect of the methanols in the subcluster provides the most important contribution to allow the intracluster proton transfer reaction to occur with little or no energy barrier. As n >or= 4, the methanol subcluster is able to form ring structures to stabilize the cluster structures so that direct proton transfer is not a favored process. The preferred reaction product, the (CH3OH)3H(+) cluster ion, indicates that this size-restricted reaction is driven by both the proton affinity and the enhanced stability of the resulting product.

K-mean clustering algorithm for processing signals from compound semiconductor detectors

NASA Astrophysics Data System (ADS)

Tada, Tsutomu; Hitomi, Keitaro; Wu, Yan; Kim, Seong-Yun; Yamazaki, Hiromichi; Ishii, Keizo

2011-12-01

The K-mean clustering algorithm was employed for processing signal waveforms from TlBr detectors. The signal waveforms were classified based on its shape reflecting the charge collection process in the detector. The classified signal waveforms were processed individually to suppress the pulse height variation of signals due to the charge collection loss. The obtained energy resolution of a 137Cs spectrum measured with a 0.5 mm thick TlBr detector was 1.3% FWHM by employing 500 clusters.

Origin of selenium–gold interaction in F{sub 2}CSe⋯AuY (Y = CN, F, Cl, Br, OH, and CH{sub 3}): Synergistic effects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Xin; Yang, Yu-Ping; Li, Qing-Zhong, E-mail: liqingzhong1990@sina.com, E-mail: lihaibei@sdu.edu.cn

Selenium–gold interaction plays an important role in crystal materials, molecular self-assembly, and pharmacochemistry involving gold. In this paper, we unveiled the mechanism and nature of selenium–gold interaction by studying complexes F{sub 2}CSe⋯AuY (Y = CN, F, Cl, Br, OH, and CH{sub 3}). The results showed that the formation of selenium–gold interaction is mainly attributed to the charge transfer from the lone pair of Se atom to the Au—Y anti-bonding orbital. Energy decomposition analysis indicated that the polarization energy is nearly equivalent to or exceeds the electrostatic term in the selenium–gold interaction. Interestingly, the chalcogen–gold interaction becomes stronger with the increasemore » of chalcogen atomic mass in F{sub 2}CX⋯AuCN (X = O, S, Se, and Te). The cyclic ternary complexes are formed with the introduction of NH{sub 3} into F{sub 2}CSe⋯AuY, in which selenium–gold interaction is weakened and selenium–nitrogen interaction is strengthened due to the synergistic effects.« less

Polyhalogenated Very Short Live Substances in the Atlantic Ocean, and their Linkages with Ocean Primary Production

NASA Astrophysics Data System (ADS)

Liu, Y.; Yvon-Lewis, S. A.; Hu, L.; Bianchi, T. S.; Campbell, L.; Smith, R. W.

2011-12-01

The Halocarbon Air-Sea Transect - Atlantic (HalocAST-A) cruise was conducted aboard FS Polarstern during the ANT-XXVII/1 expedition. The ship departed from Bremerhaven, Germany on October 25th and arrived in Cape Town, South Africa on November 24th in 2010. The HalocAST-A cruise was devoted to studying air-sea fluxes of a suite of halocarbon compounds. Atmospheric mixing ratios and seawater concentrations of the halocarbons were continuously measured with the gas chromatograph - mass spectrometer (GC-MS). This study focuses on the polyhalogenated very short lived substances (VSLSs) such as bromoform (CHBr3), dibromomethane (CH2Br2), chlorodibromomethane (CHClBr2), and bromodichloromethane (CHBrCl2). The goal of this study is to examine the distributions of these compounds and possible relationship between their emissions and oceanic primary production. Therefore, along with the halocarbon concentrations, parameters like dissolved organic carbon concentrations, nutrient concentrations, pigment concentrations, and picoplankton and heterotrophic bacteria counts were also determined. The observed saturation anomalies indicated these VSLSs were supersaturated for almost the entire duration of the cruise. The highest seawater concentrations for these compounds were observed near the Canary Islands. Air mixing ratios were also elevated in this region. The net fluxes for CHBr3, CH2Br2, CHClBr2, and CHBrCl2 were 13.8 nmol m-2 d-1, 4.5 nmol m-2 d-1, 4.5 nmol m-2 d-1 and 1.2 nmol m-2 d-1, respectively. During the HalocAST-A cruise, these compounds exhibit similar trends with total chlorophyll a. Contributions from selected phytoplankton group will be further assessed through the use of individual pigment biomarkers.

Study of Pair and many-body interactions in rare-gas halide atom clusters using negative ion zero electron kinetic energy (ZEKE) and threshold photodetachment spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yourshaw, Ivan

1998-07-09

The diatomic halogen atom-rare gas diatomic complexes KrBr -, XeBr -, and KrCl - are studied in this work by zero electron kinetic energy (ZEKE) spectroscopy in order to characterize the weak intermolecular diatomic potentials of these species. Also, the ZEKE and threshold photodetachment spectra of the polyatomic clusters Ar nBr - (n = 2-9) and Ar nI - (n = 2-19) are studied to obtain information about the non-additive effects on the interactions among the atoms. This work is part of an ongoing effort to characterize the pair and many-body potentials of the complete series of rare gas halidemore » clusters. In these studies we obtain information about both the anionic and neutral clusters.« less

Mechanistic Analysis of the C-H Amination Reaction of Menthol by CuBr2 and Selectfluor.

PubMed

Sathyamoorthi, Shyam; Lai, Yin-Hung; Bain, Ryan M; Zare, Richard N

2018-05-18

The mechanism of the Ritter-type C-H amination reaction of menthol with acetonitrile using CuBr 2 , Selectfluor, and Zn(OTf) 2 , first disclosed by Baran and coworkers in 2012, was studied using a combination of online electrospray ionization mass spectrometry, continuous UV/vis spectrometric monitoring, and density functional theory calculations. In addition to corroborating Baran's original mechanistic proposal, these studies uncovered a second pathway to product formation, which likely only occurs in microdroplets. DFT calculations show that neither pathway has a barrier that is greater than 6.8 kcal/mol, suggesting that both mechanisms are potentially operative under ambient conditions.

Crystal structure of the new A2SnTa6X18 (A = K, Rb, Cs; X = Cl, Br) cluster compounds

NASA Astrophysics Data System (ADS)

Lemoine, P.; Wilmet, M.; Malaman, B.; Paofai, S.; Dumait, N.; Cordier, S.

2018-01-01

The crystal structure of the new cluster compounds A2SnTa6X18 (with A = K, Rb, Cs, and X = Cl, Br) was determined by using single-crystal and powder X-ray diffraction, and 119Sn Mössbauer spectroscopy. Those compounds crystallize in the Cs2EuNb6Br18-type structure of space group R 3 ̅. This type of structure is built up on discrete edge-bridged [M6Xi12Xa6]4- cluster units arranged according to a pseudo face-centered cubic stacking, where the octahedral and tetrahedral vacancies are fully occupied by divalent tin cations and monovalent alkaline cations, respectively. The tin cations influence on the halogen matrix and the electronic effects on the cluster units in the Cs2EuNb6Br18-type structure are discussed by comparison with isotype compounds. From those analyses, the ionic radius of Sn2+ in coordination number VI is estimated to be 1.14(1) Å. Finally, K2SnTa6Br18 might be considered as a new example of compound containing a quite bare stannous ion (5 s2 configuration).

A Confined Fabrication of Perovskite Quantum Dots in Oriented MOF Thin Film.

PubMed

Chen, Zheng; Gu, Zhi-Gang; Fu, Wen-Qiang; Wang, Fei; Zhang, Jian

2016-10-26

Organic-inorganic hybrid lead organohalide perovskites are inexpensive materials for high-efficiency photovoltaic solar cells, optical properties, and superior electrical conductivity. However, the fabrication of their quantum dots (QDs) with uniform ultrasmall particles is still a challenge. Here we use oriented microporous metal-organic framework (MOF) thin film prepared by liquid phase epitaxy approach as a template for CH 3 NH 3 PbI 2 X (X = Cl, Br, and I) perovskite QDs fabrication. By introducing the PbI 2 and CH 3 NH 3 X (MAX) precursors into MOF HKUST-1 (Cu 3 (BTC) 2 , BTC = 1,3,5-benzene tricarboxylate) thin film in a stepwise approach, the resulting perovskite MAPbI 2 X (X = Cl, Br, and I) QDs with uniform diameters of 1.5-2 nm match the pore size of HKUST-1. Furthermore, the photoluminescent properties and stability in the moist air of the perovskite QDs loaded HKUST-1 thin film were studied. This confined fabrication strategy demonstrates that the perovskite QDs loaded MOF thin film will be insensitive to air exposure and offers a novel means of confining the uniform size of the similar perovskite QDs according to the oriented porous MOF materials.

Dichloromethane dehalogenase of Hyphomicrobium sp. strain DM2.

PubMed

Kohler-Staub, D; Leisinger, T

1985-05-01

Dichloromethane dehalogenase, a highly inducible glutathione-dependent enzyme catalyzing the conversion of dichloromethane into formaldehyde and inorganic chloride, was purified fivefold with 60% yield from Hyphomicrobium sp. strain DM2. The electrophoretically homogeneous purified enzyme exhibited a specific activity of 17.3 mkat/kg of protein. Its pH optimum was 8.5. The enzyme was stable at -20 degrees C for at least 6 months. A subunit molecular weight of 33,000 was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Gel filtration of native dichloromethane dehalogenase yielded a molecular weight of 195,000. Subunit cross-linking with dimethyl suberimidate confirmed the hexameric tertiary structure of the enzyme. Dichloromethane dehalogenase was highly specific for dihalomethanes. Its apparent Km values were 30 microM for CH2Cl2, 15 microM for CH2BrCl, 13 microM for CH2Br2, 5 microM for CH2I2, and 320 microM for glutathione. Several chlorinated aliphatic compounds inhibited the dichloromethane dehalogenase activity of the pure enzyme. The Ki values of the competitive inhibitors 1,2-dichloroethane and 1-chloropropane were 3 and 56 microM, respectively.

Dichloromethane dehalogenase of Hyphomicrobium sp. strain DM2.

PubMed Central

Kohler-Staub, D; Leisinger, T

1985-01-01

Dichloromethane dehalogenase, a highly inducible glutathione-dependent enzyme catalyzing the conversion of dichloromethane into formaldehyde and inorganic chloride, was purified fivefold with 60% yield from Hyphomicrobium sp. strain DM2. The electrophoretically homogeneous purified enzyme exhibited a specific activity of 17.3 mkat/kg of protein. Its pH optimum was 8.5. The enzyme was stable at -20 degrees C for at least 6 months. A subunit molecular weight of 33,000 was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Gel filtration of native dichloromethane dehalogenase yielded a molecular weight of 195,000. Subunit cross-linking with dimethyl suberimidate confirmed the hexameric tertiary structure of the enzyme. Dichloromethane dehalogenase was highly specific for dihalomethanes. Its apparent Km values were 30 microM for CH2Cl2, 15 microM for CH2BrCl, 13 microM for CH2Br2, 5 microM for CH2I2, and 320 microM for glutathione. Several chlorinated aliphatic compounds inhibited the dichloromethane dehalogenase activity of the pure enzyme. The Ki values of the competitive inhibitors 1,2-dichloroethane and 1-chloropropane were 3 and 56 microM, respectively. Images PMID:3988708

Effect of Pendant Side-Chain Sterics and Dipole Forces on Short Range Ordering in Random Polyelectrolytes

NASA Astrophysics Data System (ADS)

Nwosu, Chinomso; Pandey, Tara; Herring, Andrew; Coughlin, Edward; University of Massachusetts, Amherst Collaboration; Colorado School of Mines Collaboration

Backbone-to-backbone spacing in polymers is known to be dictated by the length of the pendant side-chains. Dipole forces in random polyelectrolytes lead to ionic clusters with a characteristic spacing that can be observed by SAXS. Repulsion due to side-chain sterics will compete with dipole forces driving cluster formation in random polyelectrolytes. A model study on short range order in anion exchange membranes (AEMs) of quaternized P4VP-ran-PI is presented. Quaternization of P4VP with alkyl bromides having different numbers of carbons, CnBr, introduces pendant side-chains as well as charges. X-ray scattering performed on PQ4VP-ran-PI(CnBr) show that when n <5 the dipole forces dominate leading to the formation of ionic clusters. However, when n >4, the chains remain separated due to sterics, forming a distinct backbone-to-backbone spacing morphology. For n=3, both dipole clustering and backbone spacing can coexist. Crosslinking of the isoprene units increased the coexistence window from n=3 to n=6. Impedance measurements show that a maximum conductivity of 110mS/cm was obtained for PQ4VP-ran-PI(C3Br). A discussion on short range order due to competition, or counter balancing, of steric repulsion and dipole forces will be presented. US Army MURI project (W911NF1010520).

Complexes and saddle point structures, vibrational frequencies and relative energies of intermediates for CH2Br + HBr «-» CH3Br + Br

NASA Astrophysics Data System (ADS)

Espinosa-Garcia, J.

Ab initio molecular orbital theory was used to study parts of the reaction between the CH2Br radical and the HBr molecule, and two possibilities were analysed: attack on the hydrogen and attack on the bromine of the HBr molecule. Optimized geometries and harmonic vibrational frequencies were calculated at the second-order Moller-Plesset perturbation theory levels, and comparison with available experimental data was favourable. Then single-point calculations were performed at several higher levels of calculation. In the attack on the hydrogen of HBr, two stationary points were located on the direct hydrogen abstraction reaction path: a very weak hydrogen bonded complex of reactants, C···HBr, close to the reactants, followed by the saddle point (SP). The effects of level of calculation (method + basis set), spin projection, zeropoint energy, thermal corrections (298K), spin-orbit coupling and basis set superposition error (BSSE) on the energy changes were analysed. Taking the reaction enthalpy (298K) as reference, agreement with experiment was obtained only when high correlation energy and large basis sets were used. It was concluded that at room temperature (i.e., with zero-point energy and thermal corrections), when the BSSE was included, the complex disappears and the activation enthalpy (298K) ranges from 0.8kcal mol-1 to 1.4kcal mol-1 above the reactants, depending on the level of calculation. It was concluded also that this result is the balance of a complicated interplay of many factors, which are affected by uncertainties in the theoretical calculations. Finally, another possible complex (X complex), which involves the alkyl radical being attracted to the halogen end of HBr (C···BrH), was explored also. It was concluded that this X complex does not exist at room temperature.

The rate of charge tunneling is insensitive to polar terminal groups in self-assembled monolayers in Ag(TS)S(CH2)(n)M(CH2)(m)T//Ga2O3/EGaIn junctions.

PubMed

Yoon, Hyo Jae; Bowers, Carleen M; Baghbanzadeh, Mostafa; Whitesides, George M

2014-01-08

This paper describes a physical-organic study of the effect of uncharged, polar, functional groups on the rate of charge transport by tunneling across self-assembled monolayer (SAM)-based large-area junctions of the form Ag(TS)S(CH2)(n)M(CH2)(m)T//Ga2O3/EGaIn. Here Ag(TS) is a template-stripped silver substrate, -M- and -T are "middle" and "terminal" functional groups, and EGaIn is eutectic gallium-indium alloy. Twelve uncharged polar groups (-T = CN, CO2CH3, CF3, OCH3, N(CH3)2, CON(CH3)2, SCH3, SO2CH3, Br, P(O)(OEt)2, NHCOCH3, OSi(OCH3)3), having permanent dipole moments in the range 0.5 < μ < 4.5, were incorporated into the SAM. A comparison of the electrical characteristics of these junctions with those of junctions formed from n-alkanethiolates led to the conclusion that the rates of charge tunneling are insensitive to the replacement of terminal alkyl groups with the terminal polar groups in this set. The current densities measured in this work suggest that the tunneling decay parameter and injection current for SAMs terminated in nonpolar n-alkyl groups, and polar groups selected from common polar organic groups, are statistically indistinguishable.

Time-resolved photoelectron imaging of iodide-nitromethane (I-·CH3NO2) photodissociation dynamics.

PubMed

Kunin, Alice; Li, Wei-Li; Neumark, Daniel M

2016-12-07

Femtosecond time-resolved photoelectron spectroscopy is used to probe the decay channels of iodide-nitromethane (I - ·CH 3 NO 2 ) binary clusters photoexcited at 3.56 eV, near the vertical detachment energy (VDE) of the cluster. The production of I - is observed, and its photoelectron signal exhibits a mono-exponential rise time of 21 ± 1 ps. Previous work has shown that excitation near the VDE of the I - ·CH 3 NO 2 complex transfers an electron from iodide to form a dipole-bound state of CH 3 NO 2 - that rapidly converts to a valence bound (VB) anion. The long appearance time for the I - fragment suggests that the VB anion decays by back transfer of the excess electron to iodide, reforming the I - ·CH 3 NO 2 anion and resulting in evaporation of iodide. Comparison of the measured lifetime to that predicted by RRKM theory suggests that the dissociation rate is limited by intramolecular vibrational energy redistribution in the re-formed anion between the high frequency CH 3 NO 2 vibrational modes and the much lower frequency intermolecular I - ·CH 3 NO 2 stretch and bends, the predominant modes involved in cluster dissociation to form I - . Evidence for a weak channel identified as HI + CH 2 NO 2 - is also observed.

Theoretical Probing of Weak Anion-Cation Interactions in Certain Pyridinium-Based Ionic Liquid Ion Pairs and the Application of Molecular Electrostatic Potential in Their Ionic Crystal Density Determination: A Comparative Study Using Density Functional Approach.

PubMed

Joseph, Aswathy; Thomas, Vibin Ipe; Żyła, Gaweł; Padmanabhan, A S; Mathew, Suresh

2018-01-11

A comprehensive study on the structure, nature of interaction, and properties of six ionic pairs of 1-butylpyridinium and 1-butyl-4-methylpyridinium cations in combination with tetrafluoroborate (BF 4 - ), chloride (Cl - ), and bromide (Br - ) anions have been carried out using density functional theory (DFT). The anion-cation interaction energy (ΔE int ), thermochemistry values, theoretical band gap, molecular orbital energy order, DFT-based chemical activity descriptors [chemical potential (μ), chemical hardness (η), and electrophilicity index (ω)], and distribution of density of states (DOS) of these ion pairs were investigated. The ascendancy of the -CH 3 substituent at the fourth position of the 1-butylpyridinium cation ring on the values of ΔE int , theoretical band gap and chemical activity descriptors was evaluated. The ΔE int values were negative for all six ion pairs and were highest for Cl - containing ion pairs. The theoretical band gap value after -CH 3 substitution increased from 3.78 to 3.96 eV (for Cl - ) and from 2.74 to 2.88 eV (for Br - ) and decreased from 4.9 to 4.89 eV (for BF 4 - ). Ion pairs of BF 4 - were more susceptible to charge transfer processes as inferred from their significantly high η values and comparatively small difference in ω value after -CH 3 substitution. The change in η and μ values due to the -CH 3 substituent is negligibly small in all cases except for the ion pairs of Cl - . Critical-point (CP) analyses were carried out to investigate the AIM topological parameters at the interionic bond critical points (BCPs). The RDG isosurface analysis indicated that the anion-cation interaction was dominated by strong H cat ···X ani and C cat ···X ani interactions in ion pairs of Cl - and Br - whereas a weak van der Waal's effect dominated in ion pairs of BF 4 - . The molecular electrostatic potential (MESP)-based parameter ΔΔV min measuring the anion-cation interaction strength showed a good linear correlation with ΔE int for all 1-butylpyridinium ion pairs (R 2 = 0.9918). The ionic crystal density values calculated by using DFT-based MESP showed only slight variations from experimentally reported values.

Pressure dependence of excited-state charge-carrier dynamics in organolead tribromide perovskites

NASA Astrophysics Data System (ADS)

Liu, X. C.; Han, J. H.; Zhao, H. F.; Yan, H. C.; Shi, Y.; Jin, M. X.; Liu, C. L.; Ding, D. J.

2018-05-01

Excited-state charge-carrier dynamics governs the performance of organometal trihalide perovskites (OTPs) and is strongly influenced by the crystal structure. Characterizing the excited-state charge-carrier dynamics in OTPs under high pressure is imperative for providing crucial insights into structure-property relations. Here, we conduct in situ high-pressure femtosecond transient absorption spectroscopy experiments to study the excited-state carrier dynamics of CH3NH3PbBr3 (MAPbBr3) under hydrostatic pressure. The results indicate that compression is an effective approach to modulate the carrier dynamics of MAPbBr3. Across each pressure-induced phase, carrier relaxation, phonon scattering, and Auger recombination present different pressure-dependent properties under compression. Responsiveness is attributed to the pressure-induced variation in the lattice structure, which also changes the electronic band structure. Specifically, simultaneous prolongation of carrier relaxation and Auger recombination is achieved in the ambient phase, which is very valuable for excess energy harvesting. Our discussion provides clues for optimizing the photovoltaic performance of OTPs.

Vibrational Spectroscopy of Cation and Anion Channelrhodopsins

NASA Astrophysics Data System (ADS)

Yi, Adrian S.

Optogenetics is a technique to control and monitor cell activity with light by expression of specific microbial rhodopsins. Cation channelrhodopsins (CCRs) and anion channelrhodopsins (ACRs) have been demonstrated to activate and silence cell activity, respectively. In this dissertation, the molecular mechanisms of two channelrhodopsins are studied: a CCR from Chlamydomonas augustae (CaChR1) and an ACR from Guillardia theta (GtACR1). The recently discovered GtACR1is especially interesting, as it achieves neural silencing with 1/1000th of the light intensity compared to previous microbial rhodopsin silencing ion pumps. Static and time-resolved resonance Raman, FTIR difference, and UV-visible spectroscopies were utilized in addition to various biochemical and genetic techniques to explore the molecular mechanisms of these channelrhodopsins. In CaChR1, Glu169 and Asp299 residues are located nearby the Schiff base (SB) similar to the homologous residues Asp85 and Asp212, which exist in an ionized state in unphotolyzed bacteriorhodopsin (BR) and play a key role in proton pumping. We observe significant changes in the protonation states of the SB, Glu169, and Asp299 of CaChR1 leading up to the open-channel P2 state, where all three groups exist in a charge neutral state. This unusual charge neutrality along with the position of these groups in the CaChR1 ion channel suggests that charge neutrality plays an important role in cation gating and selectivity in these low efficiency CCRs. Significant differences exist in the photocycle and protonation/hydrogen bonding states of key residues inGtACR1compared to BR and CaChR1. Resonance Raman studies reveal that in the unphotolyzed state of GtACR1, residues Glu68, Ser97 (BR Asp85 homolog), and Asp234 (BR Asp212 homolog) located near the SB exist in charge neutral states. Furthermore, upon K formation, these residues do not change their protonation states. At room temperature, a slow decay of the red-shifted K intermediate is observed, which exists in equilibrium with the L intermediate. At 80 K, a lower thermal barrier for K → L transition is observed compared to BR and CaChR1. This effect may be due to substitution of a Met residue at position 105 for the highly conserved Leu or Ile residue.

The protonated 2-halogenated imidazolium cation as the noncovalent interaction donor: the σ-hole and π-hole interactions.

PubMed

Wang, Jingjing; Mo, Lixin; Li, Xiaoyan; Geng, Zongke; Zeng, Yanli

2016-12-01

The σ-hole and π-hole of the protonated 2-halogenated imidazolium cation (XC 3 H 4 N 2 + ; X = F, Cl, Br, I) were investigated and analyzed. The monomers of (CH 3 ) 3 SiY(Y=F, Cl, Br, I), considered as the Lewis base, were combined with the σ-hole and π-hole of XC 3 H 4 N 2 + to form the σ-hole and π-hole interactions in the bimolecular complexes (CH 3 ) 3 SiY · · · XC 3 H 4 N 2 + and (CH 3 ) 3 SiY · · · C 3 (X)H 4 N 2 + (X/Y=F, Cl, Br, I), respectively. For both the σ-hole and π-hole interactions, the equilibrium geometries of complexes show regular changes according to the sequence of heavy sequence of the noncovalent interaction acceptors and donors. The electrostatic energy is the main contribution in the formation of both kinds of interactions, it has linear relations with the V S,max values of σ-hole and the V' S,max values of π-hole. Both the σ-hole and π-hole interactions belong to the closed-shell and noncovalent interactions. The π-hole interactions are stronger than the σ-hole interactions. For the π-hole interactions, the contribution percents of the dispersion energies are somewhat greater than those of the σ-hole interactions, while it is contrary for the polarization energy. Graphical Abstract The protonated 2-halogenated imidazolium cation as the noncovalent interaction donor: the σ-hole and π-hole interactionsᅟ.

The Acid-Base Properties, Hydrolytic Mechanism, and Susceptibility to O2 Oxidation of Fe4S4(SR)4-2 Clusters

PubMed Central

Bruice, Thomas C.; Maskiewicz, Richard; Job, Robert

1975-01-01

The iron-sulfur cluster compounds Fe4S4(SR)4-2 [where —SR = —SCH3, —S—C(CH3)3, and —S— CH2—CH(CH3)2] have been found to represent the base species of weak acids of pKa comparable to that of carboxylic acids. The acid species Fe4S4(SR)4H- is most subject to reaction with O2 and to acid-catalyzed solvolysis, while the base species Fe4S4(SR)4-2 most readily undergoes ligand exchange. The kinetics for hydrolysis of the isobutyl mercaptide cluster salt has been investigated in detail and a mechanism involving the stepwise process [Formula: see text] has been proposed. The importance of the acid-base equilibria in determining the reactivity of the iron-sulfur clusters and its possible importance as a factor in the determination of the potentials of ferredoxins and high potential iron protein are discussed. PMID:16592211

Isolation, characterization, and computational studies of the novel [Mo3(mu3-Br)2(mu-Br)3Br6]2- cluster anion.

PubMed

Paraskevopoulou, Patrina; Makedonas, Christodoulos; Psaroudakis, Nikolaos; Mitsopoulou, Christiana A; Floros, Georgios; Seressioti, Andriana; Ioannou, Marinos; Sanakis, Yiannis; Rath, Nigam; Gómez García, Carlos J; Stavropoulos, Pericles; Mertis, Konstantinos

2010-03-01

The novel trimolybdenum cluster [Mo(3)(mu(3)-Br)(2)(mu-Br)(3)Br(6)](2-) (1, {Mo(3)}(9+), 9 d-electrons) has been isolated from the reaction of [Mo(CO)(6)] with 1,2-C(2)H(4)Br(2) in refluxing PhCl. The compound has been characterized in solution by electrospray ionization mass spectrometry (ESI-MS), UV-vis spectroscopy, cyclic voltammetry, and in the solid state by X-ray analysis (counter-cations: (n-Bu)(4)N(+) (1), Et(4)N(+), Et(3)BzN(+)), electron paramagnetic resonance (EPR), magnetic susceptibility measurements, and infrared spectroscopy. The least disordered (n-Bu)(4)N(+) salt crystallizes in the monoclinic space group C2/c, a = 20.077(2) A, b = 11.8638(11) A, c = 22.521(2) A, alpha = 90 deg, beta = 109.348(4) deg, gamma = 90 deg, V = 5061.3(9) A(3), Z = 4 and contains an isosceles triangular metal arrangement, which is capped by two bromine ligands. Each edge of the triangle is bridged by bromine ions. The structure is completed by six terminal bromine ligands. According to the magnetic measurements and the EPR spectrum the trimetallic core possesses one unpaired electron. Electrochemical data show that oxidation by one electron of 1 is reversible, thus proceeding with retention of the trimetallic core, while the reduction is irreversible. The effective magnetic moment of 1 (mu(eff), 1.55 mu(B), r.t.) is lower than the spin-only value (1.73 mu(B)) for S = 1/2 systems, most likely because of high spin-orbit coupling of Mo(III) and/or magnetic coupling throughout the lattice. The ground electronic state of 1 was studied using density functional theory techniques under the broken symmetry formalism. The ground state is predicted to exhibit strong antiferromagnetic coupling between the three molybdenum atoms of the core. Moreover, our calculated data predict two broken symmetry states that differ only by 0.4 kcal/mol (121 cm(-1)). The antiferromagnetic character is delocalized over three magnetic orbitals populated by three electrons. The assignment of the infrared spectra is also provided.

Vibrational dynamics of aniline(Ar)1 and aniline(CH4)1 clusters

NASA Astrophysics Data System (ADS)

Nimlos, M. R.; Young, M. A.; Bernstein, E. R.; Kelley, D. F.

1989-11-01

The first excited electronic state (S1) vibrational dynamics of aniline(Ar)1 and aniline(CH4)1 van der Waals (vdW) clusters have been studied using molecular jet and time resolved emission spectroscopic techniques. The rates of intramolecular vibrational energy redistribution (IVR) and vibrational predissociation (VP) as functions of vibrational energy are reported for both clusters. For vibrational energy in excess of the cluster binding energy, both clusters are observed to dissociate. The dispersed emission spectra of these clusters demonstrate that aniline(Ar)1 dissociates to all energetically accessible bare molecule states and that aniline(CH4)1 dissociates selectively to only the bare molecule vibrationless state. The emission kinetics show that in the aniline(Ar)1 case, the initially excited states have nanosecond lifetimes, and intermediate cluster states have very short lifetimes. In contrast, the initially excited aniline(CH4)1 states and other intermediate vibrationally excited cluster states are very short lived (<100 ps), and the intermediate cluster 00 state is observed. These results can be understood semiquantitatively in terms of an overall serial IVR/VP mechanism which consists of the following: (1) the rates of chromophore to vdW mode IVR are given by Fermi's golden rule, and the density of vdW vibrational states is the most important factor in determining the relative [aniline(Ar)1 vs aniline(CH4)1] rates of IVR; (2) IVR among the vdW modes is rapid; and (3) VP rates can be calculated by a restricted vdW mode phase space Rice-Ramsberger-Kassel-Marcus theory. Since the density of vdW states is three orders of magnitude greater for aniline(CH4)1 than aniline(Ar)1 at 700 cm-1, the model predicts that IVR is slow and rate limiting in aniline(Ar)1, whereas VP is slow and rate limiting in aniline(CH4)1. The agreement of these predictions with the experimental results is very good and is discussed in detail.

AEROSOL DEPOSITION EFFICIENCIES AND UPSTREAM RELEASE POSITIONS FOR DIFFERENT INHALATION MODES IN AN UPPER BRONCHIAL AIRWAY MODELS

EPA Science Inventory

Aerosol Deposition Efficiencies and Upstream Release Positions for Different Inhalation Modes in an Upper Bronchial Airway Model

Zhe Zhang, Clement Kleinstreuer, and Chong S. Kim

Center for Environmental Medicine and Lung Biology, University of North Carolina at Ch...

Photodissociation dynamics of bromoiodomethane from the first and second absorption bands. A combined velocity map and slice imaging study.

PubMed

Marggi Poullain, Sonia; Chicharro, David V; Navarro, Eduardo; Rubio-Lago, Luis; González-Vázquez, Jesús; Bañares, Luis

2018-01-31

The photodissociation dynamics of bromoiodomethane (CH 2 BrI) have been investigated at the maximum of the first A and second A' absorption bands, at 266 and 210 nm excitation wavelengths, respectively, using velocity map and slice imaging techniques in combination with a probe detection of both iodine and bromine fragments, I( 2 P 3/2 ), I*( 2 P 1/2 ), Br( 2 P 3/2 ) and Br*( 2 P 1/2 ) via (2 + 1) resonance enhanced multiphoton ionization. Experimental results, i.e. translational energy and angular distributions, are reported and discussed in conjunction with high level ab initio calculations of potential energy curves and absorption spectra. The results indicate that in the A-band, direct dissociation through the 5A' excited state leads to the I( 2 P 3/2 ) channel while I*( 2 P 1/2 ) atoms are produced via the 5A' → 4A'/4A'' nonadiabatic crossing. The presence of Br and Br* fragments upon excitation to the A-band is attributed to indirect dissociation via a curve crossing between the 5A' with upper excited states such as the 9A'. The A'-band is characterized by a strong photoselectivity leading exclusively to the Br( 2 P 3/2 ) and Br*( 2 P 1/2 ) channels, which are likely produced by dissociation through the 9A' excited state. Avoided crossings between several excited states from both the A and A' bands entangle however the possible reaction pathways.

Synthesis, structural characterization, and electrochemical properties of dinuclear Ni/Mn model complexes for the active site of [NiFe]-hydrogenases.

PubMed

Song, Li-Cheng; Li, Jia-Peng; Xie, Zhao-Jun; Song, Hai-Bin

2013-10-07

Four new dinuclear Ni/Mn model complexes RN(PPh2)2Ni(μ-SEt)2(μ-Cl)Mn(CO)3 (7, R = p-MeC6H4CH2; 8, R = EtO2CCH2) and RN(PPh2)2Ni(μ-SEt)2(μ-Br)Mn(CO)3 (9, R = p-MeC6H4CH2; 10, R = EtO2CCH2) have been prepared via the four separated step-reactions involving six new precursors RN(PPh2)2 (1, R = p-MeC6H4CH2; 2, R = EtO2CCH2), RN(PPh2)2NiCl2 (3, R = p-MeC6H4CH2; 4, R = EtO2CCH2), and RN(PPh2)2Ni(SEt)2 (5, R = p-MeC6H4CH2; 6, R = EtO2CCH2). The Et3N-assisted aminolysis of Ph2PCl with p-MeC6H4CH2NH2 or EtO2CCH2NH2·HCl in CH2Cl2 gave the azadiphosphine ligands 1 and 2 in 38% and 53% yields, whereas the coordination reaction of 1 or 2 with NiCl2·6H2O in CH2Cl2/MeOH afforded the mononuclear Ni dichloride complexes 3 and 4 in 59% and 78% yields, respectively. While thiolysis of 3 or 4 with EtSH under the assistance of Et3N in CH2Cl2 produced the mononuclear Ni dithiolate complexes 5 and 6 in 64% and 68% yields, further treatment of 5 and 6 with Mn(CO)5Cl or Mn(CO)5Br resulted in formation of the dinuclear Ni/Mn model complexes 7-10 in 31-73% yields. All the new compounds 1-10 have been structurally characterized, while model complexes 7 and 9 have been found to be catalysts for HOAc proton reduction to hydrogen under CV conditions.

Various fates of neuronal progenitor cells observed on several different chemical functional groups

NASA Astrophysics Data System (ADS)

Liu, Xi; Wang, Ying; He, Jin; Wang, Xiu-Mei; Cui, Fu-Zhai; Xu, Quan-Yuan

2011-12-01

Neuronal progenitor cells cultured on gold-coated glass surfaces modified by different chemical functional groups, including hydroxyl (-OH), carboxyl (-COOH), amino (-NH2), bromo (-Br), mercapto (-SH), - Phenyl and methyl (-CH3), were studied here to investigate the influence of surface chemistry on the cells' adhesion, morphology, proliferation and functional gene expression. Focal adhesion staining indicated in the initial culture stage cells exhibited morphological changes in response to different chemical functional groups. Cells cultured on -NH2 grafted surface displayed focal adhesion plaque and flattened morphology and had the largest contact area. However, their counter parts on -CH3 grafted surface displayed no focal adhesion and rounded morphology and had the smallest contact area. After 6 days culture, the proliferation trend was as follows: -NH2 > -SH> -COOH> - Phenyl > - Br > -OH> -CH3. To determine the neural functional properties of the cells affected by surface chemistry, the expression of glutamate decarboxylase (GAD67), nerve growth factor (NGF) and brainderived neurotrophic factor (BDNF) were characterized. An increase of GAD67 expression was observed on -NH2, -COOH and -SH grafted surfaces, while no increase in NGF and BDNF expression was observed on any chemical surfaces. These results highlight the importance of surface chemistry in the fate determination of neuronal progenitor cells, and suggest that surface chemistry must be considered in the design of biomaterials for neural tissue engineering.

CH3NH3PbI3 and CsPbI3 Supramolecular Clusters in 1D: Do They Evolve with the Same Principle of Cooperative Binding?

NASA Astrophysics Data System (ADS)

Varadwaj, Arpita; Varadwaj, Pradeep R.; Yamashita, Koichi

Development of novel semiconductor-based photo-catalytic and -voltaic systems is a major area of research in nanoscience and technologies, and engineering. The process can be either direct or indirect in converting the light energy into electricity. Some of the photovoltaics include the organic, dye-sensitized, and halide perovskite solar cells, among others. Methylammonium lead iodide (CH3NH3PbI3) inorganic-organic hybrid perovskite is one among the many highly valued semiconductors reported till date, comparable with the inorganic cesium lead iodide (CsPbI3) perovskite. These are competitive candidates in the solar energy race. Nevertheless, this study was concentrated on the fundamental understanding of the rational designs of the CH3NH3PbI3 and CsPbI3 supramolecular materials using first-principles calculations, emerged though the self-assembly of the respective building blocks. It therefore addresses the question whether the (CH3NH3PbI3)n and (CsPbI3)n (n =1-10) supramolecular clusters are the consequences of additivity, or non-additive cooperative binding? For addressing this question, the supramolecular properties such as the polarizability, the intermolecular charge transfer, and the binding energy, etc., all w.r.t the cluster size n, are exploited. CREST-JST, 7 Gobancho, Chiyoda-ku, Tokyo, Japan 102-0076.

Synthesis and characterization of monomeric Mn (IV) and pseudo-tetrameric Mn (III) complexes: magnetic properties of Mn (III) complex.

PubMed

Yahsi, Yasemin; Kara, Hulya

2014-06-05

Two novel monomer Mn (IV) [Mn(3,5-ClL1)2]⋅(CH3OH), (1), [3,5-ClL1H2=N-(2-hydroxyethyl)-3,5-dichlorosalicylaldimine] (1) and hydrogen-bonded pseudo-tetramer Mn (III) [Mn(5-BrL2)(H2O)2]2⋅[Mn(5-BrL2)(H2O)]2⋅2⋅(ClO4), (2), [5-BrL2H2=N,N'-bis(5-bromosalicylidenato)-1,2-diamino-2-methylpropane)] (2) Schiff base complexes have been synthesized and their crystal structures have been determined by single crystal X-ray diffraction analysis. A variable temperature magnetic susceptibility measurement study has been performed for complex (2) and the result indicates there is a very weak antiferromagnetic interaction (J=-0.40±0.016cm(-1)) between the two manganese (III) centers. Copyright © 2014 Elsevier B.V. All rights reserved.

Structural requirements and reaction pathways in dimethyl ether combustion catalyzed by supported Pt clusters.

PubMed

Ishikawa, Akio; Neurock, Matthew; Iglesia, Enrique

2007-10-31

The identity and reversibility of the elementary steps required for catalytic combustion of dimethyl ether (DME) on Pt clusters were determined by combining isotopic and kinetic analyses with density functional theory estimates of reaction energies and activation barriers to probe the lowest energy paths. Reaction rates are limited by C-H bond activation in DME molecules adsorbed on surfaces of Pt clusters containing chemisorbed oxygen atoms at near-saturation coverages. Reaction energies and activation barriers for C-H bond activation in DME to form methoxymethyl and hydroxyl surface intermediates show that this step is more favorable than the activation of C-O bonds to form two methoxides, consistent with measured rates and kinetic isotope effects. This kinetic preference is driven by the greater stability of the CH3OCH2* and OH* intermediates relative to chemisorbed methoxides. Experimental activation barriers on Pt clusters agree with density functional theory (DFT)-derived barriers on oxygen-covered Pt(111). Measured DME turnover rates increased with increasing DME pressure, but decreased as the O2 pressure increased, because vacancies (*) on Pt surfaces nearly saturated with chemisorbed oxygen are required for DME chemisorption. DFT calculations show that although these surface vacancies are required, higher oxygen coverages lead to lower C-H activation barriers, because the basicity of oxygen adatoms increases with coverage and they become more effective in hydrogen abstraction from DME. Water inhibits reaction rates via quasi-equilibrated adsorption on vacancy sites, consistent with DFT results indicating that water binds more strongly than DME on vacancies. These conclusions are consistent with the measured kinetic response of combustion rates to DME, O2, and H2O, with H/D kinetic isotope effects, and with the absence of isotopic scrambling in reactants containing isotopic mixtures of 18O2-16O2 or 12CH3O12CH3-13CH3O13CH3. Turnover rates increased with Pt cluster size, because small clusters, with more coordinatively unsaturated surface atoms, bind oxygen atoms more strongly than larger clusters and exhibit lower steady-state vacancy concentrations and a consequently smaller number of adsorbed DME intermediates involved in kinetically relevant steps. These effects of cluster size and metal-oxygen bond energies on reactivity are ubiquitous in oxidation reactions requiring vacancies on surfaces nearly saturated with intermediates derived from O2.

InGaAsP/InP buried-heterostructure lasers /lambda = 1.5 microns/ with chemically etched mirrors

NASA Astrophysics Data System (ADS)

Adachi, S.; Kawaguchi, H.; Takahei, K.; Noguchi, Y.

1981-09-01

The monolithic fabrication of buried heterostructure InGaAsP/InP lasers operating at a wavelength of 1.5 microns with chemically etched mirrors is reported. The buried heterostructure lasers were prepared from InGaAsP/InP DH wafers reverse-mesa etched with a Br2:CH3OH solution, with the reverse-mesa walls buried by subsequent LPE growth. To fabricate the etched mirror laser, Au-Zn metal was evaporated onto the epitaxial-layer side of the wafer and an Au-Zn contact was defined by photolithography; photolithographic techniques were used to define a SiO2 mask directly over the Au-Zn contact for etched mirror definition using either 0.3 vol % Br2:CH3OH or HCl:CH3COOH:H2O2 1:2:1 solutions. A threshold current of 50 mA is obtained from lasers thus produced, which is nearly the same as that of conventionally fabricated cleaved-mirror lasers. The procedure presented thus allows low threshold-current devices to be obtained with a much greater flexibility in design and fabrication than previously attained.

Theoretical Study of Indium Compounds of Interest for Organometallic Chemical Vapor Deposition

NASA Technical Reports Server (NTRS)

Cardelino, B. H.; Moore, C. E.; Cardelino, C. A.; Frazier, D. O.; Backmann, K. J.

2000-01-01

The structural. electronic and therinochemical properties of indium compounds which are of interest in halide transport and organometallic chemical vapor deposition processes have been studied by ab initio and statistical mechanics methods. The compounds reported include: indium halides and hydrides (InF, InCl, InCl3, InH, InH2, InH3); indium clusters (In2, In3); methylindium, dimethylindium, and their hydrogen derivatives [In(CH3), In(CH3)H, In(CH3)H2, In(CH3)2, In(CH3)2H]; dimethyl-indium dimer [In2(CH3)4], trimethyl-indium [In(CH3)3]; dehydrogenated methyl, dimethyl and trimethylindium [In(CH3)2CH2, In(CH3)CH2, In(CH2)], trimethylindium adducts with ammonia, trimethylamine and hydrazine [(CH3)3In:NH3, (CH3)3In:N(CH3)3, (CH3)3In:N(H2)N(H2)]; dimethylamino-indium and methylimino-indium [In(CH3)2(NH2), In(CH3)(NH)]; indium nitride and indium nitride dimer (InN, In2N2), indium phosphide, arsenide and antimonide ([InP, InAs, InSb). The predicted electronic properties are based on density functional theory calculations; the calculated thermodynamic properties are reported following the format of the JANAF (Joint Army, Navy, NASA, Air Force) Tables. Equilibrium compositions at two temperatures (298 and 1000 K) have been analyzed for groups of competing simultaneous reactions.

Hydrothermal synthesis and photoluminescent properties of hierarchical GdPO4·H2O:Ln3+ (Ln3+ = Eu3+, Ce3+, Tb3+) flower-like clusters

NASA Astrophysics Data System (ADS)

Amurisana, Bao.; Zhiqiang, Song.; Haschaolu, O.; Yi, Chen; Tegus, O.

2018-02-01

3D hierarchical GdPO4·H2O:Ln3+ (Ln3+ = Eu3+, Ce3+, Tb3+) flower clusters were successfully prepared on glass slide substrate by a simple, economical hydrothermal process with the assistance of disodium ethylenediaminetetraacetic acid (Na2H2L, where L4- = (CH2COO)2N(CH2)2N(CH2COO)24-). In this process, Na2H2L was used as both a chelating agent and a structure-director. The hierarchical flower clusters have an average diameter of 7-12 μm and are composed of well-aligned microrods. The influence of the molar ratio of Na2H2L/Gd3+ and reaction time on the morphology was systematically studied. A possible crystal growth and formation mechanism of hierarchical flower clusters is proposed based on the evolution of morphology as a function of reaction time. The self-assembled GdPO4·H2O:Ln3+ superstructures exhibit strong orange-red (Eu3+, 5D0 → 7F1), green (Tb3+, 5D4 → 7F5) and near ultraviolet emissions (Ce3+, 5d → 7F5/2) under ultraviolet excitation, respectively. This study may provide a new channel for building hierarchically superstructued oxide micro/nanomaterials with optical and new properties.

Direct evaluation of the hyperconjugative interactions in 1,1,1-trihaloethane (CH3CX3, X = F, Cl, and Br).

PubMed

Chen, Zhenhua; Corminboeuf, Clémence; Mo, Yirong

2014-08-07

Following the computational strategy proposed by Mulliken in 1939 ( J. Chem. Phys. 1939, 7 (5), 339-352), when the concept of hyperconjugation was coined, we evaluated the hyperconjugative stabilization energy in 1,1,1-trihaloethane using the block-localized wave function (BLW) method. The BLW method is the simplest and most efficient variant of ab initio valence bond (VB) theory and can derive the strictly electron-localized state wave function self-consistently. The latter serves as a reference for the quantification of the electron delocalization effect in terms of the resonance theory. Computations show that the overall hyperconjugative interactions in 1,1,1-trihaloethane, dominated by σ(CH) → σ'(CX) with minor contribution from σ(CX) → σ'(CH), ranges from 9.59 to 7.25 kcal/mol in the staggered structures and decreases in the order Br > Cl > F. This is in accord with the (1)H NMR spectra of CH3CX3. Notably, the hyperconjugation effect accounts for 35-40% of the rotation barriers in these molecules, which are dominated by the conventional steric repulsion. This is consistent with the recent findings with 1,2-difluoroethane (Freitas, Bühl, and O'Hagan. Chem. Comm. 2012, 48, 2433-2435) that the variation of (1)J(CF) with the FCCF torsional angle cannot be well explained by the hyperconjugation model

Computational Study of Ternary Devices: Stable, Low-Cost, and Efficient Planar Perovskite Solar Cells

NASA Astrophysics Data System (ADS)

Sajid, Sajid; Elseman, Ahmed Mourtada; Ji, Jun; Dou, Shangyi; Wei, Dong; Huang, Hao; Cui, Peng; Xi, Wenkang; Chu, Lihua; Li, Yingfeng; Jiang, Bing; Li, Meicheng

2018-07-01

Although perovskite solar cells with power conversion efficiencies (PCEs) more than 22% have been realized with expensive organic charge-transporting materials, their stability and high cost remain to be addressed. In this work, the perovskite configuration of MAPbX (MA = CH3NH3, X = I3, Br3, or I2Br) integrated with stable and low-cost Cu:NiO x hole-transporting material, ZnO electron-transporting material, and Al counter electrode was modeled as a planar PSC and studied theoretically. A solar cell simulation program (wxAMPS), which served as an update of the popular solar cell simulation tool (AMPS: Analysis of Microelectronic and Photonic Structures), was used. The study yielded a detailed understanding of the role of each component in the solar cell and its effect on the photovoltaic parameters as a whole. The bandgap of active materials and operating temperature of the modeled solar cell were shown to influence the solar cell performance in a significant way. Further, the simulation results reveal a strong dependence of photovoltaic parameters on the thickness and defect density of the light-absorbing layers. Under moderate simulation conditions, the MAPbBr3 and MAPbI2Br cells recorded the highest PCEs of 20.58 and 19.08%, respectively, while MAPbI3 cell gave a value of 16.14%. [Figure not available: see fulltext.

Advanced Testing of Safe-Solvent Replacements for CFC-113 for Use in Cleaning Oxygen Systems

DTIC Science & Technology

2005-06-01

2 -(trifluoromethyl)-3,3,3- trifluoropropene 2 Reactions/28 Impacts Failed 4-bromo- 3 - chloro -3,4,4-trifluoro-1-butene 2 ...bromo- 3 - chloro -3,4,4-trifluoro-1-butene, CH2=CH-CFCl-CF2Br § 1- chloro -2,2,2-trifluoroethyl difluoromethyl ether, CHF2-O-CHCl-CF3 § 2 - chloro -1,1,2...3,3,3- trifluoropropene 725°F Recommended 4-bromo- 3 - chloro -3,4,4-trifluoro-1-butene 378°F Caution 1- chloro -2,2,2-trifluoroethyl difluoromethyl ether

Vacancy cascades in small molecules following x-ray inner shell photoionization

NASA Astrophysics Data System (ADS)

Ray, D.; Dunford, R. W.; Southworth, S. H.; Kanter, E. P.; Doumy, G.; Gao, Y.; Ho, P. J.; Picon, A.

2014-05-01

We are investigating molecular effects in vacancy cascades of small molecules containing heavy atoms - IBr, Br2 and CH2BrI - following K-shell ionization. In addition to fundamental interest in the physics of such decay processes, there are practical applications such as medical treatments that use energetic fragmentation of iodinated compounds with high energy x-rays to selectively treat tumorous cells. Other biological applications are also promising. We utilize the tunable monochromatic x-ray beam at the Advanced Photon Source to trigger K-shell photoionization of Br and I, and measure charge distributions and the kinetic energies released to the fragment ions. A newly designed detection device allows us to do multi-fold coincidence measurements involving momentum imaging of all the ion fragments with very high detection efficiency in coincidence with x-ray fluorescence detection. By comparing the molecular fragmentation probabilities and the kinetic energies released in Br2, IBr and CH2BrI we aim to gain understanding of the fragmentation mechanism as a function of the bond distance between I and Br. Supported by the Chemical Sciences, Geosciences, and Biosciences Division, Office of Basic Energy Sciences, Office of Science, US Dept of Energy, Contract DE-AC02-06CH11357.

Gas-Phase Brønsted Superacidity of Some Derivatives of Monocarba-closo-Borates: a Computational Study

NASA Astrophysics Data System (ADS)

Lipping, Lauri; Leito, Ivo; Koppel, Ivar; Koppel, Ilmar A.

2009-10-01

The structures and gas-phase acidities (GA) of several CB11H12H-based carborane acid derivatives (HA) have been calculated with DFT B3LYP method using 6-311+G**, 6-311++G** basis sets. In order to verify the obtained GA values, several systems were also studied at G3(MP2) level of theory. Inserted substituents (CF3, F, Cl, Br, I, CN, CH3, etc.) followed the "belts" of the monocarborane cage starting from the boron antipodal to the carbon. In general, the predicted intrinsic gas-phase acidities of the systems varied according to the substituents in the following order of decreasing strength: CF3 > F > Cl > Br > I > CN > CH3. Nevertheless, some inconsistencies occurred. F and CN derivatives with lower degree of substitution had weaker intrinsic acidities than the respective Cl derivatives, but the situation was reversed in the case of a larger number of substituents. To obtain better understanding how the substituents influence the basicity of the carborane anion, three hypothetical reaction series were investigated, in which the protonation center was fixed on the boron atom (B12), antipodal to the carbon (C1), and a single substituent replaced the hydrogens at the vertexes of the three remaining positions (C1, B2, and B7). The intrinsic gas-phase acidities in these series of neutral carborane-based acids CB11X1H11H are found to clearly depend on the field-inductive and resonance effects of the substituent X. Some influence of the polarizability of X on the reaction center (B12) could be detected only in the alpha position (B7).

Crystal structure of bromido-fac-tricarbon-yl[5-(3,4,5-tri-meth-oxy-phen-yl)-3-(pyridin-2-yl)-1H-1,2,4-triazole-κ2N2,N3]rhenium(I) methanol monosolvate.

PubMed

Kharlova, Marharyta I; Piletska, Kseniia O; Domasevitch, Kostiantyn V; Shtemenko, Alexander V

2017-04-01

In the title compound, [ReBr(C 16 H 16 N 4 O 3 )(CO) 3 ]·CH 3 OH, the Re I atom adopts a distorted octa-hedral coordination sphere with a facial arrangement of the three carbonyl ligands. Two N atoms of the chelating 5-(3,4,5-tri-meth-oxy-phen-yl)-3-(pyridin-2-yl)-1 H -1,2,4-triazole ligand and two carbonyl ligands define the equatorial plane of the complex, with the third carbonyl ligand and the bromide ligand in axial positions. Conventional hydrogen bonds including the methanol solvent mol-ecules assemble the complex mol-ecules through mutual N-H⋯O-H⋯Br links [N⋯O = 2.703 (3) Å and O⋯Br = 3.255 (2) Å] into centrosymmetric dimers, whereas weaker C-H⋯O and C-H⋯Br hydrogen bonds [C⋯O = 3.215 (3)-3.390 (4) Å and C⋯Br = 3.927 (3) Å] connect the dimers into double layers parallel to the (111) plane.

Oxygen-Centered Hexatantalum Tetradecaimido Cluster Complexes

PubMed Central

Krinsky, Jamin L.; Anderson, Laura L.; Arnold, John; Bergman, Robert G.

2008-01-01

The syntheses and characterization of several octahedral hexatantalum cluster compounds of formula (ArN)14Ta6O are described (Ar = Ph, p-MeC6H4, p-MeOC6H4, p-t-BuC6H4, p-BrC6H4, m-ClC6H4). Treatment of Bn3Ta=N-t-Bu (Bn = CH2C6H5) or pentakis(dimethylamido)tantalum with an excess of the appropriate aniline and stoichiometric water or tantalum oxide afforded varying yields of arylimido clusters. The structures of two species were confirmed by X-ray diffraction (XRD), while the identity of the central oxygen atom was elucidated by electrospray mass spectrometry (MS) using 17O/18O-enriched material. The title species are very air- and moisture-sensitive but quite thermally stable in solution. Experimentally determined optical properties and oxidation/reduction potentials, as well as some computational results, indicate that they possess an electronic structure wherein the highest occupied molecular orbitals are ligand-centered, while the lowest unoccupied orbitals are metal-centered and delocalized throughout the tantalum cage. Whereas chemical oxidation resulted in cluster decomposition, reduction with decamethylcobaltocene yielded stable salts of formula [Cp*2Co][(ArN)14Ta6O] (Ar = Ph, Ar = p-MeC6H4). Small-molecule reactivity studies on one of these clusters showed that its imido functionalities are moderately reactive toward oxide donors but inert with respect to metallaheterocycle-forming processes. Clean imido/oxo exchange was observed with aldehydes and ketones, leading cleanly to organic imines with no soluble byproducts being observed. This exchange was also observed with a rhenium oxo compound (generating an imidorhenium complex as the only soluble species). All 14 imido groups were transferred in these reactions, and no mixed-ligand cluster intermediates were ever observed. PMID:18163614

Many Mg-Mg bonds form the core of the Mg16Cp*8Br4K cluster anion: the key to a reassessment of the Grignard reagent (GR) formation process?

PubMed

Kruczyński, T; Henke, F; Neumaier, M; Bowen, K H; Schnöckel, H

2016-02-01

It caused a sensation eight years ago, when the first room temperature stable molecular compound with a Mg-Mg bond (LMgMgL, L = chelating ligand) containing magnesium in the oxidation state +1 was prepared. Here, we report the preparation of a [Mg 16 Cp*8Br 4 K] - cluster anion (Cp* = pentamethylcyclopentadiene) with 27 Mg-Mg bonds. It has been obtained through the reaction of KCp* with a metastable solution of MgBr in toluene. A highly-resolved Fourier transform mass spectrum (FT-MS) of this cluster anion, brought into vacuum by electrospraying its solution in THF, provides the title cluster's stoichiometry. This Mg 16 cluster together with experiments on the metastable solution of MgBr show that: during the formation process of GRs (Grignard reagents) which are involved in most of sophisticated syntheses of organic products, not the highly reactive MgBr radical as often presumed, but instead the metalloid Mg 16 Cp*8Br 4 cluster anion and its related cousins that are the operative intermediates along the pathway from Mg metal to GRs ( e.g. Cp*MgBr).

Optimized interface and recrystallized grains by CsBr treatment for enhanced photovoltaic performance of perovskite solar cells

NASA Astrophysics Data System (ADS)

Liu, Li; Su, Pengyu; Yao, Huizhen; Wang, Jun; Fu, Wuyou; Liu, Xizhe; Yang, Haibin

2018-06-01

Doping, interface optimization and recrystallization are effective approaches for fabricating high performance perovskite solar cells (PSCs). In our work, simple CsBr treatment is introduced to improve the performance of TiO2 nanorods-based PSCs. Both Cs+ and Br- are doped into CH3NH3PbI3 simultaneously, as well as optimizes the interface between perovskite and hole-transporting material (HTM). In addition, the perovskite grains are recrystallized through this method. Finally, a power conversion efficiency (PCE) of 16.02% with 0.72 in fill factor (FF) and 1.08 in open circuit voltage (VOC) is obtained through CsBr treatment, which is 19.91% higher than that of untreated devices (13.36% with 0.65 in FF and 1.02 in VOC). Furthermore, the power output maintains ∼14% after 3500 h under the humidity within 15% at room temperature.

Structures and properties of spherical 90-vertex fullerene-like nanoballs.

PubMed

Scheer, Manfred; Schindler, Andrea; Bai, Junfeng; Johnson, Brian P; Merkle, Roger; Winter, Rainer; Virovets, Alexander V; Peresypkina, Eugenia V; Blatov, Vladislav A; Sierka, Marek; Eckert, Hellmut

2010-02-15

By applying the proper stoichiometry of 1:2 to [Cp(R)Fe(eta(5)-P(5))] and CuX (X=Cl, Br) and dilution conditions in mixtures of CH(3)CN and solvents like CH(2)Cl(2), 1,2-Cl(2)C(6)H(4), toluene, and THF, nine spherical giant molecules having the simplified general formula [Cp(R)Fe(eta(5)-P(5))]@[{Cp(R)Fe(eta(5)-P(5))}(12){CuX}(25)(CH(3)CN)(10)] (Cp(R)=eta(5)-C(5)Me(5) (Cp*); eta(5)-C(5)Me(4)Et (Cp(Et)); X=Cl, Br) have been synthesized and structurally characterized. The products consist of 90-vertex frameworks consisting of non-carbon atoms and forming fullerene-like structural motifs. Besides the mostly neutral products, some charged derivatives have been isolated. These spherical giant molecules show an outer diameter of 2.24 (X=Cl) to 2.26 nm (X=Br) and have inner cavities of 1.28 (X=Cl) and 1.20 nm (X=Br) in size. In most instances the inner voids of these nanoballs encapsulate one molecule of [Cp*Fe(eta(5)-P(5))], which reveals preferred orientations of pi-pi stacking between the cyclo-P(5) rings of the guest and those of the host molecules. Moreover, pi-pi and sigma-pi interactions are also found in the packing motifs of the balls in the crystal lattice. Electrochemical investigations of these soluble molecules reveal one irreversible multi-electron oxidation at E(p)=0.615 V and two reduction steps (-1.10 and -2.0 V), the first of which corresponds to about 12 electrons. Density functional calculations reveal that during oxidation and reduction the electrons are withdrawn or added to the surface of the spherical nanomolecules, and no Cu(2+) species are involved.

Manganese-catalysed benzylic C(sp3)-H amination for late-stage functionalization

NASA Astrophysics Data System (ADS)

Clark, Joseph R.; Feng, Kaibo; Sookezian, Anasheh; White, M. Christina

2018-06-01

Reactions that directly install nitrogen into C-H bonds of complex molecules are significant because of their potential to change the chemical and biological properties of a given compound. Although selective intramolecular C-H amination reactions are known, achieving high levels of reactivity while maintaining excellent site selectivity and functional-group tolerance remains a challenge for intermolecular C-H amination. Here, we report a manganese perchlorophthalocyanine catalyst [MnIII(ClPc)] for intermolecular benzylic C-H amination of bioactive molecules and natural products that proceeds with unprecedented levels of reactivity and site selectivity. In the presence of a Brønsted or Lewis acid, the [MnIII(ClPc)]-catalysed C-H amination demonstrates unique tolerance for tertiary amine, pyridine and benzimidazole functionalities. Mechanistic studies suggest that C-H amination likely proceeds through an electrophilic metallonitrene intermediate via a stepwise pathway where C-H cleavage is the rate-determining step of the reaction. Collectively, these mechanistic features contrast with previous base-metal-catalysed C-H aminations and provide new opportunities for tunable selectivities.

Manganese-catalysed benzylic C(sp3)-H amination for late-stage functionalization.

PubMed

Clark, Joseph R; Feng, Kaibo; Sookezian, Anasheh; White, M Christina

2018-06-01

Reactions that directly install nitrogen into C-H bonds of complex molecules are significant because of their potential to change the chemical and biological properties of a given compound. Although selective intramolecular C-H amination reactions are known, achieving high levels of reactivity while maintaining excellent site selectivity and functional-group tolerance remains a challenge for intermolecular C-H amination. Here, we report a manganese perchlorophthalocyanine catalyst [MnIII(ClPc)] for intermolecular benzylic C-H amination of bioactive molecules and natural products that proceeds with unprecedented levels of reactivity and site selectivity. In the presence of a Brønsted or Lewis acid, the [MnIII(ClPc)]-catalysed C-H amination demonstrates unique tolerance for tertiary amine, pyridine and benzimidazole functionalities. Mechanistic studies suggest that C-H amination likely proceeds through an electrophilic metallonitrene intermediate via a stepwise pathway where C-H cleavage is the rate-determining step of the reaction. Collectively, these mechanistic features contrast with previous base-metal-catalysed C-H aminations and provide new opportunities for tunable selectivities.

Weak hydrogen bonds in complexes pairing monohalomethanes with neutral formic acid

NASA Astrophysics Data System (ADS)

Solimannejad, Mohammad; Scheiner, Steve

2006-06-01

Ab initio calculations are used to analyze the interaction between formic acid and CH 3X, for X equal to each of F, Cl, and Br. All minima are cyclic in that they contain more than one H-bond. The most strongly bound contain a OH⋯X bond, along with CH⋯O, and the others contain CH⋯X and CH⋯O interactions. Alterations of the covalent bond lengths within each subunit, and vibrational frequency shifts, coupled with electronic charge shifts, reveal fundamental features of these complexes, and the nature of the interactions. The OH⋯X bond is the strongest of those examined here, followed by CH⋯X and CH⋯O.

Pathways for the OH + Br2 → HOBr + Br and HOBr + Br → HBr + BrO Reactions.

PubMed

Wang, Hongyan; Qiu, Yudong; Schaefer, Henry F

2016-02-11

The OH radical reaction with Br2 and the subsequent reaction HOBr + Br are of exceptional importance to atmospheric chemistry and environmental chemistry. The entrance complex, transition state, and exit complex for both reactions have been determined using the coupled-cluster method with single, double, and perturbative triple excitations CCSD(T) with correlation consistent basis sets up to size cc-pV5Z and cc-pV5Z-PP. Coupled cluster effects with full triples (CCSDT) and full quadruples (CCSDTQ) are explicitly investigated. Scalar relativistic effects, spin-orbit coupling, and zero-point vibrational energy corrections are evaluated. The results from the all-electron basis sets are compared with those from the effective core potential (ECP) pseudopotential (PP) basis sets. The results are consistent. The OH + Br2 reaction is predicted to be exothermic 4.1 ± 0.5 kcal/mol, compared to experiment, 3.9 ± 0.2 kcal/mol. The entrance complex HO···BrBr is bound by 2.2 ± 0.2 kcal/mol. The transition state lies similarly well below the reactants OH + Br2. The exit complex HOBr···Br is bound by 2.7 ± 0.6 kcal/mol relative to separated HOBr + Br. The endothermicity of the reaction HOBr + Br → HBr + BrO is 9.6 ± 0.7 kcal/mol, compared with experiment 8.7 ± 0.3 kcal/mol. For the more important reverse (exothermic) HBr + BrO reaction, the entrance complex BrO···HBr is bound by 1.8 ± 0.6 kcal/mol. The barrier for the HBr + BrO reaction is 6.8 ± 0.9 kcal/mol. The exit complex (Br···HOBr) for the HBr + BrO reaction is bound by 1.9 ± 0.2 kcal/mol with respect to the products HOBr + Br.

Ionized-Cluster Beam/Partially Ionized Beam Deposition of Electro- Optical and Nonlinear Optical Organic Materials and Device Development

DTIC Science & Technology

1993-08-29

4’- CH3 O--\\\\4 4N -2 nitrostilbene NO 2J (MMONS) 4’-dimethylamfino OCH3 -N-4-stylbazolium j, o3 - 200 3125 1000 tosylate (DAST)or 0 3 (CH3)2N CH3 Styrylpyridinium PH cyanine dye 400 1490 470 ( SPCD ) SO4 (CH3 ½2N lh3 20

Analytic Morse/long-range potential energy surfaces and "adiabatic-hindered-rotor" treatment for a symmetric top-linear molecule dimer: A case study of CH3F-H2

NASA Astrophysics Data System (ADS)

Zhang, Xiao-Long; Ma, Yong-Tao; Zhai, Yu; Li, Hui

2018-03-01

A first effective six-dimensional ab initio potential energy surface (PES) for CH3F-H2 which explicitly includes the intramolecular Q3 stretching normal mode of the CH3F monomer is presented. The electronic structure computations have been carried out at the explicitly correlated coupled cluster level of theory [CCSD(T)-F12a] with an augmented correlation-consistent triple zeta basis set. Five-dimensional analytical intermolecular PESs for ν3(CH3F) = 0 and 1 are then obtained by fitting the vibrationally averaged potentials to the Morse/Long-Range (MLR) potential function form. The MLR function form is applied to the nonlinear molecule-linear molecule case for the first time. These fits to 25 015 points have root-mean-square deviations of 0.74 cm-1 and 0.082 cm-1 for interaction energies less than 0.0 cm-1. Using the adiabatic hindered-rotor approximation, three-dimensional PESs for CH3F-paraH2 are generated from the 5D PESs over all possible orientations of the hydrogen monomer. The infrared and microwave spectra for CH3F-paraH2 dimer are predicted for the first time. These analytic PESs can be used for modeling the dynamical behavior in CH3F-(H2)N clusters, including the possible appearance of microscopic superfluidity.

Atmospheric halocarbons - A discussion with emphasis on chloroform

NASA Technical Reports Server (NTRS)

Yung, Y. L.; Mcelroy, M. B.; Wofsy, S. C.

1975-01-01

Bleaching of paper pulp represents a major industrial use of chlorine and could provide an environmentally significant source of atmospheric halocarbons. The related global production of chloroform is estimated at 300,000 ton per year and there could be additional production associated with atmospheric decomposition of perchloroethylene. Estimates are given for the production of methyl chloride, methyl bromide and methyl iodide, 5.2 million, 77 thousand, and 740 thousand ton per year respectively. The relative yields of CH3Cl, CH3Br and CH3I are consistent with the hypothesis of a marine biological source for these compounds. Concentrations of other halocarbons observed in the atmosphere appear to indicate industrial sources.

Dudley Herschbach: Chemical Reactions and Molecular Beams

Science.gov Websites

elementary reactions such as K + CH3I and K + Br2, where it became possible to correlate reaction dynamics been a pioneer in the measurement and theoretical interpretation of vector properties of reaction

Use of cannabis among 139 cluster headache sufferers.

PubMed

Leroux, Elizabeth; Taifas, Irina; Valade, Dominique; Donnet, Anne; Chagnon, Miguel; Ducros, Anne

2013-02-01

A case report suggested the efficacy of cannabis to treat cluster headache (CH) attacks. Our aims were to study the frequency of cannabis use in CH patients, and the reported effects on attacks. A total of 139 patients with CH attending two French headache centers filled out questionnaires. Sixty-three of the 139 patients (45.3%) had a history of cannabis use. As compared to nonusers, cannabis users were more likely to be younger (p < 0.001), male (p = 0.002) and tobacco smokers (p < 0.001). Among the 27 patients (19.4% of the total cohort) who had tried cannabis to treat CH attacks, 25.9% reported some efficacy, 51.8% variable or uncertain effects, and 22.3% negative effects. Cannabis use is very frequent in CH patients, but its efficacy for the treatment of the attacks is limited. Less than one third of self-reported users mention a relief of their attacks following inhalation. Cannabis should not be recommended for CH unless controlled trials with synthetic selective cannabinoids show a more convincing therapeutic benefit.

Visualizing Carrier Transport in Metal Halide Perovskite Nanoplates via Electric Field Modulated Photoluminescence Imaging.

PubMed

Hu, Xuelu; Wang, Xiao; Fan, Peng; Li, Yunyun; Zhang, Xuehong; Liu, Qingbo; Zheng, Weihao; Xu, Gengzhao; Wang, Xiaoxia; Zhu, Xiaoli; Pan, Anlian

2018-05-09

Metal halide perovskite nanostructures have recently been the focus of intense research due to their exceptional optoelectronic properties and potential applications in integrated photonics devices. Charge transport in perovskite nanostructure is a crucial process that defines efficiency of optoelectronic devices but still requires a deep understanding. Herein, we report the study of the charge transport, particularly the drift of minority carrier in both all-inorganic CsPbBr 3 and organic-inorganic hybrid CH 3 NH 3 PbBr 3 perovskite nanoplates by electric field modulated photoluminescence (PL) imaging. Bias voltage dependent elongated PL emission patterns were observed due to the carrier drift at external electric fields. By fitting the drift length as a function of electric field, we obtained the carrier mobility of about 28 cm 2 V -1 S -1 in the CsPbBr 3 perovskite nanoplate. The result is consistent with the spatially resolved PL dynamics measurement, confirming the feasibility of the method. Furthermore, the electric field modulated PL imaging is successfully applied to the study of temperature-dependent carrier mobility in CsPbBr 3 nanoplates. This work not only offers insights for the mobile carrier in metal halide perovskite nanostructures, which is essential for optimizing device design and performance prediction, but also provides a novel and simple method to investigate charge transport in many other optoelectronic materials.

Local Versus Long-Range Diffusion Effects of Photoexcited States on Radiative Recombination in Organic-Inorganic Lead Halide Perovskites.

PubMed

Vrućinić, Milan; Matthiesen, Clemens; Sadhanala, Aditya; Divitini, Giorgio; Cacovich, Stefania; Dutton, Sian E; Ducati, Caterina; Atatüre, Mete; Snaith, Henry; Friend, Richard H; Sirringhaus, Henning; Deschler, Felix

2015-09-01

Radiative recombination in thin films of the archetypical, high-performing perovskites CH 3 NH 3 PbBr 3 and CH 3 NH 3 PbI 3 shows localized regions of increased emission with dimensions ≈500 nm. Maps of the spectral emission line shape show narrower emission lines in high emission regions, which can be attributed to increased order. Excited states do not diffuse out of high emission regions before they decay, but are decoupled from nearby regions, either by slow diffusion rates or energetic barriers.

Direct Observation of Halide Migration and its Effect on the Photoluminescence of Methylammonium Lead Bromide Perovskite Single Crystals.

PubMed

Luo, Yanqi; Khoram, Parisa; Brittman, Sarah; Zhu, Zhuoying; Lai, Barry; Ong, Shyue Ping; Garnett, Erik C; Fenning, David P

2017-11-01

Optoelectronic devices based on hybrid perovskites have demonstrated outstanding performance within a few years of intense study. However, commercialization of these devices requires barriers to their development to be overcome, such as their chemical instability under operating conditions. To investigate this instability and its consequences, the electric field applied to single crystals of methylammonium lead bromide (CH 3 NH 3 PbBr 3 ) is varied, and changes are mapped in both their elemental composition and photoluminescence. Synchrotron-based nanoprobe X-ray fluorescence (nano-XRF) with 250 nm resolution reveals quasi-reversible field-assisted halide migration, with corresponding changes in photoluminescence. It is observed that higher local bromide concentration is correlated to superior optoelectronic performance in CH 3 NH 3 PbBr 3 . A lower limit on the electromigration rate is calculated from these experiments and the motion is interpreted as vacancy-mediated migration based on nudged elastic band density functional theory (DFT) simulations. The XRF mapping data provide direct evidence of field-assisted ionic migration in a model hybrid-perovskite thin single crystal, while the link with photoluminescence proves that the halide stoichiometry plays a key role in the optoelectronic properties of the perovskite. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Visual and sensitive fluorescent sensing for ultratrace mercury ions by perovskite quantum dots.

PubMed

Lu, Li-Qiang; Tan, Tian; Tian, Xi-Ke; Li, Yong; Deng, Pan

2017-09-15

Mercury ions sensing is an important issue for human health and environmental safety. A novel fluorescence nanosensor was designed for rapid visual detection of ultratrace mercury ions (Hg 2+ ) by using CH 3 NH 3 PbBr 3 perovskite quantum dots (QDs) based on the surface ion-exchange mechanism. The synthesized CH 3 NH 3 PbBr 3 QDs can emitt intense green fluorescence with high quantum yield of 50.28%, and can be applied for Hg 2+ sensing with the detection limit of 0.124 nM (24.87 ppt) in the range of 0 nM-100 nM. Furthermore, the interfering metal ions have no any influence on the fluorescence intensity of QDs, showing the perovskite QDs possess the high selectivity and sensitivity for Hg 2+ detection. The sensing mechanism of perovskite QDs for Hg 2+ is has also been investigated by XPS, EDX studies, showing Pb 2+ on the surface of perovskite QDs has been partially replaced by Hg 2+ . Spot plate test shows that the perovskite QDs can also be used for visual detection of Hg 2+ . Our research indicated the perovskite QDs are promising candidates for the visual fluorescence detection of environmental micropollutants. Copyright © 2017 Elsevier B.V. All rights reserved.

Diverse CdII coordination complexes derived from bromide isophthalic acid binding with auxiliary N-donor ligands

NASA Astrophysics Data System (ADS)

Tang, Meng; Dong, Bao-Xia; Wu, Yi-Chen; Yang, Fang; Liu, Wen-Long; Teng, Yun-Lei

2016-12-01

The coordination characteristics of 4-bromoisophthalic acid (4-Br-H2ip) have been investigated in a series of CdII-based frameworks. Hydrothermal reactions of CdII salts and 4-Br-H2ip together with flexible or semiflexible N-donor auxiliary ligands resulted in the formation of four three-dimensional coordination complexes with diverse structures: {Cd(bix)0.5(bix)0.5(4-Br-ip)]·H2O}n (1), [Cd(bbi)0.5(bbi)0.5(4-Br-ip)]n (2), {[Cd(btx)0.5(4-Br-ip)(H2O)]·0.5CH3OH·H2O}n (3) and {[Cd(bbt)0.5(4-Br-ip)(H2O)]·3·5H2O}n (4). These compounds were characterized by elemental analyses, IR spectra, single-crystal and powder X-ray diffraction. They displayed diverse structures depending on the configuration of the 4-connected metal node, the coordination mode of the 4-Br-H2ip, the coordination ability and conformationally flexibility of the N-donor auxiliary. Compound 1 exhibits 3-fold interpenetrated 66 topology and compound 2 has a 412 topology. Compounds 3-4 have similar 3D pillar-layered structures based on 3,4-connected binodal net with the Schläfli symbol of (4·38). The thermal stabilities and photoluminescence properties of them were discussed in detail.

A Highly Reactive Dicationic Iridium(III) Catalyst for Polarized Nazarov Cyclization

PubMed Central

Vaidya, Tulaza; Atesin, Abdurrahman C.; Herrick, Ildiko R.; Frontier, Alison J.; Eisenberg, Richard

2010-01-01

Pushing the Nazarov Envelope A new electrophilic complex [IrBr(CO)(diethylisopropylidene malonate)((R)-(+)-BINAP)](SbF6)2 (2) exhibits unusual activity in the catalysis of polarized Nazarov cyclization. Aryl vinyl ketones that show poor reactivity with well-known catalysts such as [Ir(CH3)(CO)(1,2-diiodobenzene)(dppe)](B(Arf)4−)2 (1), Sc(OTf)3 + LiClO4 and Cu(ClO4)2, can be cyclized with 2 + AgSbF6 (1:1) under mild conditions with concurrent AgBr precipitation. PMID:20358570

Charge carrier localised in zero-dimensional (CH3NH3)3Bi2I9 clusters.

PubMed

Ni, Chengsheng; Hedley, Gordon; Payne, Julia; Svrcek, Vladimir; McDonald, Calum; Jagadamma, Lethy Krishnan; Edwards, Paul; Martin, Robert; Jain, Gunisha; Carolan, Darragh; Mariotti, Davide; Maguire, Paul; Samuel, Ifor; Irvine, John

2017-08-01

A metal-organic hybrid perovskite (CH 3 NH 3 PbI 3 ) with three-dimensional framework of metal-halide octahedra has been reported as a low-cost, solution-processable absorber for a thin-film solar cell with a power-conversion efficiency over 20%. Low-dimensional layered perovskites with metal halide slabs separated by the insulating organic layers are reported to show higher stability, but the efficiencies of the solar cells are limited by the confinement of excitons. In order to explore the confinement and transport of excitons in zero-dimensional metal-organic hybrid materials, a highly orientated film of (CH 3 NH 3 ) 3 Bi 2 I 9 with nanometre-sized core clusters of Bi 2 I 9 3- surrounded by insulating CH 3 NH 3 + was prepared via solution processing. The (CH 3 NH 3 ) 3 Bi 2 I 9 film shows highly anisotropic photoluminescence emission and excitation due to the large proportion of localised excitons coupled with delocalised excitons from intercluster energy transfer. The abrupt increase in photoluminescence quantum yield at excitation energy above twice band gap could indicate a quantum cutting due to the low dimensionality.Understanding the confinement and transport of excitons in low dimensional systems will aid the development of next generation photovoltaics. Via photophysical studies Ni et al. observe 'quantum cutting' in 0D metal-organic hybrid materials based on methylammonium bismuth halide (CH 3 NH 3 )3Bi 2 I 9 .

Brominated Tyrosine and Polyelectrolyte Multilayer Analysis by Laser Desorption VUV Postionization and Secondary Ion Mass Spectrometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

University of Illinois at Chicago; Blaze, Melvin M. T.; Takahashi, Lynelle

2011-03-14

The small molecular analyte 3,5-dibromotyrosine (Br2Y) and chitosan-alginate polyelectrolyte multilayers (PEM) with and without adsorbed Br2Y were analyzed by laser desorption postionization mass spectrometry (LDPI-MS). LDPI-MS using 7.87 eV laser and tunable 8 ? 12.5 eV synchrotron vacuum ultraviolet (VUV) radiation found that desorption of clusters from Br2Y films allowed detection by≤8 eV single photon ionization. Thermal desorption and electronic structure calculations determined the ionization energy of Br2Y to be ~;;8.3?0.1 eV and further indicated that the lower ionization energies of clusters permitted their detection at≤8 eV photon energies. However, single photon ionization could only detect Br2Y adsorbed within PEMsmore » when using either higher photon energies or matrix addition to the sample. All samples were also analyzed by 25 keV Bi3 + secondary ion mass spectrometry (SIMS), with the negative ion spectra showing strong parent ion signal which complemented that observed by LDPI-MS. The negative ion SIMS depended strongly on the high electron affinity of this specific analyte and the analyte?s condensed phase environment.« less

The dynamics of methane emissions in Alaskan peatlands at different trophic levels

NASA Astrophysics Data System (ADS)

Zhang, L.; Liu, X.; Langford, L.; Chanton, J.; Hines, M. E.

2016-12-01

One major uncertainty in estimating methane (CH4) emission from wetlands is extrapolating from highly heterogeneous and inadequately studied local sites to larger scales. The heterogeneity of peatlands comes from contrasting surface vegetation compositions within short distances that are usually associated with different nutrient sources and trophic status. Different microbial communities and metabolic pathways occur at different trophic levels. Stable isotope C ratios (δ13C) have been used as a robust tool to distinguish methanogenic pathways, but different sources of parent compounds (acetate and CO2) with unique δ13C signatures, and unresolved fractionation factors associated with different methanogens, add complexity. To better understand the relationships between trophic status, surface vegetation compositions and methanogenic pathways, 28 peatland sites were studied in Fairbanks and Anchorage, Alaska in the summer of 2015. These sites were ordinated using multiple factor analysis into 3 clusters based on pH, temp, CH4 and volatile fatty acids production rates, δ13C values, and surface vegetation composition. In the low-pH trophic cluster (pH 4.2), Sphagnum fuscum was the dominant species with specific sedges (Ledum decumbens), and primary fermentation rates was slow with no CH4 detected. In the intermediate trophic level (pH 5.3), in which Sphagnum magellanicum was largely present, both hydrogenotrophic (HM) and acetoclastic methanogenesis (AM) were very active. Syntrophy was present at certain sites, which may provide CO2 and acetate with unique δ13C for CH4 production. At the highest pH trophic cluster examined in this study (pH 5.8), Carex tenuiflora, Carex aquatilis, and Sphagnum Squarrosum dominated. CH4 production rates were higher than those in the intermediate cluster and the apparent fractionation factor a was lower.

Solvation-induced σ-complex structure formation in the gas phase: a revisit to the infrared spectroscopy of [C6H6-(CH3OH)2]+.

PubMed

Mizuse, Kenta; Suzuki, Yuta; Mikami, Naohiko; Fujii, Asuka

2011-10-20

Structures of the [C(6)H(6)-(CH(3)OH)(2)](+) cluster cation are investigated with infrared (IR) spectroscopy. While the noncovalent type structure has been confirmed for the n = 1 cluster of [C(6)H(6)-(CH(3)OH)(n)](+), only contradictory interpretations have been given for the spectra of n = 2, in which significant changes have been observed with the Ar tagging. In the present study, we revisit IR spectroscopy of the n = 2 cluster from the viewpoint of the σ-complex structure, which includes a covalent bond formation between the benzene and methanol moieties. The observed spectral range is extended to the lower-frequency region, and the spectrum is measured with and without Ar and N(2) tagging. A strongly hydrogen-bonded OH stretch band, which is characteristic to the σ-complex structure, is newly found with the tagging. The remarkable spectral changes with the tagging are interpreted by the competition between the σ-complex and noncovalent complex structures in the [C(6)H(6)-(CH(3)OH)(2)](+) system. This result shows that the microsolvation only with one methanol molecule can induce the σ-complex structure formation.

Alignment of CH3F in para-H2 crystal studied by IR quantum cascade laser polarization spectroscopy.

PubMed

Kawasaki, Hiroyuki; Mizoguchi, Asao; Kanamori, Hideto

2016-05-14

In order to investigate the alignment of CH3F in para-H2 crystals, high resolution polarization spectroscopy of the ν3 vibrational band is studied using a quantum cascade laser at 1040 cm(-1). It is found that the main and satellite series of peaks in the ν3 vibrational band of CH3F have the same polarization dependence. This result supports the previously proposed cluster model with ortho-H2 in first and second nearest neighbor sites. The observed polarization dependence function is well described by a simple six-axis void model in which CH3F is not aligned along the c-axis of the crystal but tilted to 64.9(3)° from it.

Cluster transformation of [Cu3(μ3-H)(μ3-BH4)((PPh2)2NH)3](BF4) to [Cu3(μ3-H)(μ2,μ1-S2CH)((PPh2)2NH)3](BF4) via reaction with CS2. X-ray structural characterisation and reactivity of cationic clusters explored by multistage mass spectrometry and computational studies.

PubMed

Ma, Howard Z; Li, Jiaye; Canty, Allan J; O'Hair, Richard A J

2017-11-07

The copper nanocluster [Cu 3 (μ 3 -H)(μ 3 -BH 4 )L Ph 3 ](BF 4 ), 1a·BF4 (L Ph = (PPh 2 ) 2 NH = dppa), can potentially react with substrates at either the coordinated hydride or borohydride sites. Reaction of 1a·BF4 with CS 2 has given rise to [Cu 3 (μ 3 -H)(μ 2 ,μ 1 -S 2 CH)L Ph 3 ](BF 4 ), (2a·BF4), which was structurally characterised using electrospray ionisation (ESI) with high-resolution mass spectrometry (HRMS), X-ray crystallography, NMR, IR and UV-Vis spectroscopy. The copper(i) atoms adopt a planar trinuclear Cu 3 geometry coordinated on the bottom face by a μ 3 -hydride, on the top face by a μ 2 ,μ 1 -dithioformate and surrounded by three bridging L Ph ligands. Reaction of 1a·BF4 with elemental sulfur gives the known cluster [Cu 4 (L Ph -H + 2S) 3 ](BF 4 ), (3·BF4), which was structurally characterised via X-ray crystallography. ESI-MS of 2a·BF4 produces [Cu 3 (H)(S 2 CH)L Ph 3 ] + and its gas-phase ion chemistry was examined under multistage mass spectrometry conditions using collision-induced dissociation (CID). The primary product, [Cu 3 (H)(S 2 CH)L Ph 2 ] + , formed via ligand loss, undergoes further fragmentation via loss of thioformaldehyde to give [Cu 3 (S)L Ph 2 ] + . DFT calculations exploring rearrangement and fragmentation of the model system [Cu 3 (H)(S 2 CH)L Me 2 ] + (L Me = (PMe 2 ) 2 NH = dmpa) provide a feasible mechanism. Thus, coupling of the coordinated hydride with the dithioformate ligands gives [Cu 3 (S 2 CH 2 )L Me 2 ] + , which then undergoes CH 2 S extrusion via C-S bond cleavage to give [Cu 3 (S)L Me 2 ] + .

A comparison of very short lived halocarbon (VSLS) and DMS aircraft measurements in the tropical west Pacific from CAST, ATTREX and CONTRAST

NASA Astrophysics Data System (ADS)

Andrews, Stephen J.; Carpenter, Lucy J.; Apel, Eric C.; Atlas, Elliot; Donets, Valeria; Hopkins, James R.; Hornbrook, Rebecca S.; Lewis, Alastair C.; Lidster, Richard T.; Lueb, Richard; Minaeian, Jamie; Navarro, Maria; Punjabi, Shalini; Riemer, Daniel; Schauffler, Sue

2016-10-01

We present a comparison of aircraft measurements of halogenated very short lived substances (VSLSs) and dimethyl sulphide (DMS, C2H6S) from a co-ordinated campaign in January-February 2014 in the tropical west Pacific. Measurements were made on the NASA Global Hawk, NCAR Gulfstream-V High-performance Instrumented Airborne Platform for Environmental Research (GV HIAPER) and UK Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 (see Sect. 2.2) using four separate gas chromatography-mass spectrometry (GC-MS) instruments: one operated by the University of Miami (UoM), one from the National Center for Atmospheric Research (NCAR) and two from the University of York (UoY). DMS was measured on the BAe-146 and GV. The instruments were inter-calibrated for halocarbons during the campaign period using two gas standards on separate scales: a National Oceanic and Atmospheric Administration (NOAA) SX-3581 standard representative of clean low-hydrocarbon air, and an Essex canister prepared by UoM, representative of coastal air, which was higher in VSLS and hydrocarbon content. UoY and NCAR use the NOAA scale/standard for VSLS calibration, and UoM uses a scale based on dilutions of primary standards calibrated by GC with FID (flame ionisation detector) and AED (atomic emission detector). Analysis of the NOAA SX-3581 standard resulted in good agreement for CH2Cl2, CHCl3, CHBr3, CH2Br2, CH2BrCl, CHBrCl2, CHBr2Cl, CH3I, CH2ICl and CH2I2 (average relative standard deviation (RSD) < 10 %). Agreement was in general slightly poorer for the UoM Essex canister with an RSD of < 13 %. Analyses of CHBrCl2 and CHBr3 in this standard however showed significant variability, most likely due to co-eluting contaminant peaks, and a high concentration of CHBr3, respectively. These issues highlight the importance of calibration at atmospherically relevant concentrations ( ˜ 0.5-5 ppt for VSLSs; see Fig. 5 for individual ranges). The UoY in situ GC-MS measurements on board the BAe-146 compare favourably with ambient data from NCAR and UoM; however the UoY whole-air samples showed a negative bias for some lower-volatility compounds. This systematic bias could be attributed to sample line losses. Considering their large spatial variability, DMS and CH3I displayed good cross-platform agreement without any sampling bias, likely due to their higher volatility. After a correction was performed based upon the UoY in situ vs. whole-air data, all four instrument datasets show good agreement across a range of VSLSs, with combined mean absolute percentage errors (MAPEs) of the four platforms throughout the vertical profiles ranging between 2.2 (CH2Br2) and 15 (CH3I) % across a large geographic area of the tropical west Pacific. This study shows that the international VSLS calibration scales and instrumental techniques discussed here are in generally good agreement (within ˜ 10 % across a range of VSLSs), but that losses in aircraft sampling lines can add a major source of uncertainty. Overall, the measurement uncertainty of bromocarbons during these campaigns is much less than the uncertainty in the quantity of VSLS bromine estimated to reach the stratosphere of between 2 and 8 pptv.

Spectral characteristics of the bentonite loaded with benzyldimethyloctadecylammonium chloride, hexadecyltrimethylammonium bromide and dimethyldioctadecylammonium bromide

NASA Astrophysics Data System (ADS)

Majdan, Marek; Maryuk, Oksana; Gładysz-Płaska, Agnieszka; Pikus, Stanisław; Kwiatkowski, Ryszard

2008-02-01

The spectral characterization, including the FTIR, DRIFT (diffusive reflectance), SWAXS (small and wide angle X-ray scattering) spectra comparison of the sodium bentonite modified by BDMODA-Cl (benzyldimethyloctadecylammonium chloride), HDTMA-Br (hexadecyltrimethylammonium bromide), DDA-Br (dimethyldioctadecylammonium bromide) is presented in the paper. The FTIR spectra show the shift of C-H stretching vibrations: νsym(CH2), νasym(CH2) of surfactants methylene chains toward lower frequencies (from 2855 to 2851 cm -1 for νsym(CH2) and from 2927 to 2918 cm -1 for νansym(CH2) with the surfactant concentration in bentonite phase. The bending vibrations δH-O-H in water molecules change their positions in the direction of higher frequencies (from 1634 to 1647 cm -1) with the surfactant concentration for bentonite-BDMODA and bentonite-DDA contrary to bentonite-HDTMA, where the constant position δH-O-H is explained as the consequence of the lower concentration of the hydrogen bonded water in bentonite-HDTMA phase when compared with the remaining forms of bentonite. The DRIFT spectra reveal dramatic shift of the νSi-O stretching vibration toward higher frequencies upon intercalation of the sodium bentonite with the surfactant cations. The SWAXS spectra and SEM images of the bentonite are the evidence of somewhat different sorption mechanism of DDA-Br when compared with the BDMODA-Cl and HDTMA-Br, including remarkable external surface sorption contribution in the overall sorption.

Electronic and optical properties of MAPbX3 perovskites (X = I, Br, Cl): a unified DFT and GW theoretical analysis.

PubMed

Mosconi, Edoardo; Umari, Paolo; De Angelis, Filippo

2016-10-05

Materials engineering is a key for the enhancement of photovoltaics technology. This is particularly true for the novel class of perovskite solar cells. Accurate theoretical modelling can help establish general trends of behavior when addressing structural changes. Here, we consider the effects due to halide substitution in organohalide CH 3 NH 3 PbX 3 perovskites exploring the halide series with X = Cl, Br, I. For this task, we use accurate DFT and GW methods including spin-orbit coupling. We find the expected band gap increase when moving from X = I to Cl, in line with the experimental data. Most notably, the calculated absorption coefficients for I, Br and Cl are nicely reproducing the behavior reported experimentally. A common feature of all the simulated band structures is a significant Rashba effect. This is similar for MAPbI 3 and MAPbBr 3 while MAPbCl 3 shows in general a reduced Rashba interaction coefficient. Finally, a monotonic increase of the exciton reduced masses is calculated when moving from I to Br to Cl, in line with the stronger excitonic character of the lighter perovskite halides.

Molecular rotation and dynamics in superfluid helium-4 nanodroplets

NASA Astrophysics Data System (ADS)

Callegari, Carlo

2000-11-01

Cavity-enhanced laser radiation, coupled to molecular- beam bolometric detection has been used to study the spectroscopy of acetylenic molecules embedded in helium nanodroplets. The 2ν1 transition (CH stretch overtone) of HCN, DCCH, NCCCH, CH3CCH, CF3CCH, (CH 3)3CCCH, (CH3)3SiCCH, has been investigated in the 1.5 μm spectral region by means of a color center laser coupled to a resonant build-up cavity, which enhances the laser power experienced by the molecules in the beam by up to a factor of 400, thus overcoming the weakness of the (dipole forbidden) transitions. All molecules are observed to rotate freely in the liquid cluster environment, with strongly enhanced moments of inertia, but with negligible matrix induced shifts (less than 1 cm-1). We show that this enhancement is largely accounted for by hydrodynamic effects, which we have modeled and numerically calculated. While in the gas phase the rotational lines have instrument-limited widths (a few MHZ), in the droplets we have observed linewidths ranging from 600 MHz for (CH3)3SiCCH to 2.8GHz for (CH3) 3CCCH. To investigate the nature of the broadening (which was widely believed to be homogeneous), we have performed a series of infrared (IR) saturation experiments on the 2ν1 transition. We have also thoroughly investigated NCCCH by means of microwave (MW) single-resonance experiments (on rotational transitions) and double-resonance (MW-MW and MW-IR) experiments. The results demonstrate that the spectral features of molecules in He droplets are inhomogeneously broadened, and allow an estimate of the importance of the different broadening contributions. In particular, MW-IR measurements show that the size of the cluster greatly affects the way rotational energy is relaxed. Large clusters seem to follow a ``strong collision model'' where memory of the initial rotational state is completely lost after each ``relaxation'' event, while for smaller clusters relaxation rates are probably affected by the lower density of states available for the dissipation of energy.

Molecular rotation and dynamics in superfluid ^4He nanodroplets

NASA Astrophysics Data System (ADS)

Callegari, Carlo

2001-05-01

Cavity-enhanced laser radiation, coupled to molecular-beam bolometric detection has been used to study the spectroscopy of acetylenic molecules embedded in helium nanodroplets. The 2ν1 transition (CH stretch overtone) of HCN, DCCH, NCCCH, CH_3CCH, CF_3CCH, (CH_3)_3CCCH, (CH_3)_3SiCCH, has been investigated in the 1.5 μm spectral region by means of a color center laser coupled to a resonant buildup cavity, which enhances the laser power experienced by the molecules in the beam by up to a factor of 400, thus overcoming the weakness of the (harmonically forbidden) transitions. All molecules are observed to rotate freely in the liquid cluster environment, with strongly enhanced moments of inertia, but with negligible matrix induced shifts (less than 1 cm-1). We show that this enhancement is largely accounted for by hydrodynamic effects, which we have modeled and numerically calculated. While in the gas phase the rotational lines have instrument-limited widths (a few MHz), in the droplets we have observed linewidths ranging from 600 MHz for (CH_3)_3SiCCH to 2.8 GHz for (CH_3)_3CCCH. To investigate the nature of the broadening (which was widely believed to be homogeneous), we have performed a series of infrared (IR) saturation experiments on the 2ν1 transition. We have also thoroughly investigated NCCCH by means of microwave (MW) single-resonance experiments (on rotational transitions) and double-resonance (MW-MW and MW-IR) experiments. The results demonstrate that the spectral features of molecules in He droplets are inhomogeneously broadened, and allow an estimate of the importance of the different broadening contributions. In particular, MW-IR measurements show that the size of the cluster greatly affects the way rotational energy is relaxed. Large clusters seem to follow a ``strong collision model'' where memory of the initial rotational state is completely lost after each ``relaxation'' event, while for smaller clusters relaxation rates are probably affected by the lower density of states available for the dissipation of energy.

Theoretical studies of weak interactions of formamide with methanol and its derivates

NASA Astrophysics Data System (ADS)

Zheng, Xiao-Wen; Wang, Lu; Han, Shu-Min; Cui, Xiang-Yang; Du, Chong-Yang; Liu, Tao

2015-08-01

Theoretical calculations have been performed for the complexes of formamide (FA) with methanol and its derivates (MAX, X = F, Cl, Br, NO2, H, OH, CH3, and NH2) to study their structures and properties. Substituent effects on the hydrogen bond (H-bond) strength and cooperative effect by using water and its derivatives (HOZ, Z = H, NH2, and Br) as weak interaction probe were also explored. The calculation results show that electron-donating groups strengthen the weak interaction between formamide with methanol whereas electron-withdrawing groups weaken it. The cooperativity is present for the N-HïO H-bond in MAX-FA-HOZ and the cooperative effect increases in a series HONH2, HOH, and HOBr. In addition, we investigated the interaction between FA with hypohalous acids HOY (Y = F, Cl, and Br). It was found that the weak interaction between FA and HOY became stronger with the increase of the size of halogen atom. The nature of the halogen atom has negligible impact on the strength of the H-bond in MAX-FA (X = F, Cl, and Br), whereas it has an obvious influence on the strength of the H-bond in HOY-FA (Y = F, Cl, and Br).

Uptake of methanol on mixed HNO3/H2O clusters: An absolute pickup cross section

NASA Astrophysics Data System (ADS)

Pysanenko, A.; Lengyel, J.; Fárník, M.

2018-04-01

The uptake of atmospheric oxidized organics on acid clusters is relevant for atmospheric new particle formation. We investigate the pickup of methanol (CH3OH) on mixed nitric acid-water clusters (HNO3)M(H2O)N by a combination of mass spectrometry and cluster velocity measurements in a molecular beam. The mass spectra of the mixed clusters exhibit (HNO3)m(H2O)nH+ series with m = 0-3 and n = 0-12. In addition, CH3OH.(HNO3)m(H2O)nH+ series with very similar patterns appear in the spectra after the methanol pickup. The velocity measurements prove that the undoped (HNO3)m(H2O)nH+ mass peaks in the pickup spectra originate from the neutral (HNO3)M(H2O)N clusters which have not picked up any CH3OH molecule, i.e., methanol has not evaporated upon the ionization. Thus the fraction of the doped clusters can be determined and the mean pickup cross section can be estimated, yielding σs ¯ ≈ 20 Å2. This is compared to the lower estimate of the mean geometrical cross section σg ¯ ≈ 60 Å2 obtained from the theoretical cluster geometries. Thus the "size" of the cluster corresponding to the methanol pickup is at least 3-times smaller than its geometrical size. We have introduced a method which can yield the absolute pickup cross sections relevant to the generation and growth of atmospheric aerosols, as illustrated in the example of methanol and nitric acid clusters.

Halide anion effects on coordination polymerization of cadmium(II) halide with 1: 1 mixed ligands

NASA Astrophysics Data System (ADS)

Ryu, Minjoo; Lee, Young-A.; Jung, Ok-Sang

2018-05-01

Insight into self-assembly of CdX2 (X = Cl and Br) with a mixture of L1 and L2 (L1 = diallylbis(3-pyridyl)silane; L2 = diallylbis(4-pyridyl)silane) was carried out. The self-assembly of CdCl2 with the 1: 1 mixture of L1 and L2 produces only 2D [CdCl2(L1)(L2)] with heteroleptic ligands, whereas that of CdBr2 with the 1: 1 mixture of L1 and L2 gives rise to the statistical mixture of 2D sheet [CdBr2(L1)2]·2H2O, 1D loop-chain [CdBr2(L2)2]·2CH2Cl2, and the 2D [CdBr2(L1)(L2)] with heteroleptic ligands.

5-(Halomethyl)uridine derivatives as potential antitumor radiosensitizers: A DFT study

NASA Astrophysics Data System (ADS)

Wang, Shoushan; Zhang, Min; Liu, Peng; Xie, Shilei; Cheng, Faliang; Wang, Lishi

2018-01-01

Considering the fact that the efficiency of the uridine-5-methyl radical in producing cytotoxic DNA intrastrand cross-link lesions is greatly higher than that of the uridine-5-yl radical, the radiosensitizing action of 5-(halomethyl)uridines (5-XCH2U, X = F, Cl, or Br) is studied in the present work. It is found that 5-XCH2U has sufficient electron affinity to capture a pre-hydrated or a hydrated electron, and electron attachment leads to significantly facile X- elimination forming the uridine-5-methyl radical. All these three halogenated uridine derivatives are shown to be potential radiosensitizers, with their radiosensitizing abilities increased in an order 5-FCH2U < 5-ClCH2U ≈ 5-BrCH2U.

Reaction to Halogens and Interhalogens with 4-Halo-1,1,2-trifluorobut-1-enes: Rearrangement of 3-Membered Halonium to 5-Membered Trifluorotetramethylene Halonium Ion Intermediates and Comparison of Open-Chloronium Fluorosubstituted Ions to Flurocarbocations from Protons (Preprint)

DTIC Science & Technology

2008-02-28

were found to be open-ion (A or E), unsymmetrical (B or D), or symmetrical C depending on the halogen electrophile and on the position and number of...Rearranged products 4 (Structures A-E) 1 Z = Cl 2 Z = Br 3 Z = I XY = Cl2, Br2, BrCl ICl, IBr Scheme 1 Y on the fluorine atoms of 5 shield the carbon nucleus...and 3) WITH HALOGEN ELECTROPHILES IN METHYLENE CHLORIDE F F F Z XY CH2Cl2 CF2CFZ Y X CF2CFZ X Y CF2CFY X Z + + M aM Rearranged Run Alkene (Z

Synthetic, Infrared, 1H and 13C NMR Spectral Studies on N-(2-/3-Substituted Phenyl)-4-Substituted Benzenesulphonamides, 4-X'C6H4SO2NH(2-/3-XC6H4), where X' = H, CH3, C2H5, F, Cl or Br, and X = CH3 or Cl

NASA Astrophysics Data System (ADS)

Gowda, B. Thimme; Shetty, Mahesha; Jayalakshmi, K. L.

2005-02-01

Twenty three N-(2-/3-substituted phenyl)-4-substituted benzenesulphonamides of the general formula, 4-X'C6H4SO2NH(2-/3-XC6H4), where X' = H, CH3, C2H5, F, Cl or Br and X = CH3 or Cl have been prepared and characterized, and their infrared spectra in the solid state, 1H and 13C NMR spectra in solution were studied. The N-H stretching vibrations, νN-H, absorb in the range 3285 - 3199 cm-1, while the asymmetric and symmetric SO2 vibrations vary in the ranges 1376 - 1309 cm-1 and 1177 - 1148 cm-1, respectively. The S-N and C-N stretching vibrations absorb in the ranges 945 - 893 cm-1 and 1304 - 1168 cm-1, respectively. The compounds do not exhibit particular trends in the variation of these frequencies on substitution either at ortho or meta positions with either a methyl group or Cl. The observed 1H and 13C chemical shifts of are assigned to protons and carbons of the two benzene rings. Incremental shifts of the ring protons and carbons due to -SO2NH(2-/3-XC6H4) groups in C6H5SO2NH(2-/3-XC6H4), and 4- X'C6H4SO2- and 4-X'C6H4SO2NH- groups in 4-X'C6H4SO2NH(C6H5) are computed and employed to calculate the chemical shifts of the ring protons and carbons in the substituted compounds, 4-X'C6H4SO2NH(2-/3-XC6H4). The computed values agree well with the observed chemical shifts.

Mechanistic Details and Reactivity Descriptors in Oxidation and Acid Catalysis of Methanol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deshlahra, Prashant; Carr, Robert T.; Chai, Song-Hai

2015-02-06

Acid and redox reaction rates of CH₃OH-O₂ mixtures on polyoxometalate (POM) clusters, together with isotopic, spectroscopic, and theoretical assessments of catalyst properties and reaction pathways, were used to define rigorous descriptors of reactivity and to probe the compositional effects for oxidative dehydrogenation (ODH) and dehydration reactions. ³¹P-MAS NMR, transmission electron microscopy and titrations of protons with di-tert-butylpyridine during catalysis showed that POM clusters retained their Keggin structure upon dispersion on SiO₂ and after use in CH₃OH reactions. The effects of CH₃OH and O₂ pressures and of D-substitution on ODH rates show that C-H activation in molecularly adsorbed CH₃OH is themore » sole kinetically relevant step and leads to reduced centers as intermediates present at low coverages; their concentrations, measured from UV-vis spectra obtained during catalysis, are consistent with the effects of CH₃OH/O₂ ratios predicted from the elementary steps proposed. First-order ODH rate constants depend strongly on the addenda atoms (Mo vs W) but weakly on the central atom (P vs Si) in POM clusters, because C-H activation steps inject electrons into the lowest unoccupied molecular orbitals (LUMO) of the clusters, which are the d-orbitals at Mo⁶⁺ and W⁶⁺ centers. H-atom addition energies (HAE) at O-atoms in POM clusters represent the relevant theoretical probe of the LUMO energies and of ODH reactivity. The calculated energies of ODH transition states at each O-atom depend linearly on their HAE values with slopes near unity, as predicted for late transition states in which electron transfer and C-H cleavage are essentially complete. HAE values averaged over all accessible O-atoms in POM clusters provide the appropriate reactivity descriptor for oxides whose known structures allow accurate HAE calculations. CH₃OH dehydration proceeds via parallel pathways mediated by late carbenium-ion transition states; effects of composition on dehydration reactivity reflect changes in charge reorganizations and electrostatic forces that stabilize protons at Brønsted acid sites.« less

Formation and chemical reactivity of carbon fibers prepared by defluorination of graphite fluoride

NASA Technical Reports Server (NTRS)

Hung, Ching-Cheh

1994-01-01

Defluorination of graphite fluoride (CFX) by heating to temperatures of 250 to 450 C in chemically reactive environments was studied. This is a new and possibly inexpensive process to produce new carbon-based materials. For example, CF 0.68 fibers, made from P-100 carbon fibers, can be defluorinated in BrH2C-CH = CH-CH2Br (1,4-dibromo-2butene) heated to 370 C, and graphitized to produce fibers with an unusually high modulus and a graphite layer structure that is healed and cross-linked. Conversely, a sulfur-doped, visibly soft carbon fiber was produced by defluorinating CF 0.9 fibers, made from P-25, in sulfur (S) vapor at 370 C and then heating to 660 C in nitrogen (N2). Furthermore, defluorination of the CF 0.68 fibers in bromine (Br2) produced fragile, structurally damaged carbon fibers. Heating these fragile fibers to 1100 C in N2 caused further structural damage, whereas heating to 150 C in bromoform (CHBr3) and then to 1100 C in N2 healed the structural defects. The defluorination product of CFX, tentatively called activated graphite, has the composition and molecular structure of graphite, but is chemically more reactive. Activated graphite is a scavenger of manganese (Mn), and can be intercalated with magnesium (Mg). Also, it can easily collect large amounts of an alloy made from copper (Cu) and type 304 stainless steel to form a composite. Finally, there are indications that activated graphite can wet metals or ceramics, thereby forming stronger composites with them than the pristine carbon fibers can form.

Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit

NASA Astrophysics Data System (ADS)

Pan, Weicheng; Wu, Haodi; Luo, Jiajun; Deng, Zhenzhou; Ge, Cong; Chen, Chao; Jiang, Xiaowei; Yin, Wan-Jian; Niu, Guangda; Zhu, Lujun; Yin, Lixiao; Zhou, Ying; Xie, Qingguo; Ke, Xiaoxing; Sui, Manling; Tang, Jiang

2017-11-01

Sensitive X-ray detection is crucial for medical diagnosis, industrial inspection and scientific research. The recently described hybrid lead halide perovskites have demonstrated low-cost fabrication and outstanding performance for direct X-ray detection, but they all contain toxic Pb in a soluble form. Here, we report sensitive X-ray detectors using solution-processed double perovskite Cs2AgBiBr6 single crystals. Through thermal annealing and surface treatment, we largely eliminate Ag+/Bi3+ disordering and improve the crystal resistivity, resulting in a detector with a minimum detectable dose rate as low as 59.7 nGyair s-1, comparable to the latest record of 0.036 μGyair s-1 using CH3NH3PbBr3 single crystals. Suppressed ion migration in Cs2AgBiBr6 permits relatively large external bias, guaranteeing efficient charge collection without a substantial increase in noise current and thus enabling the low detection limit.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, Barry K.; Harvey, Jeremy N.; Glowacki, David R.

Classical molecular dynamics simulations are reported for the deazetisation and ring opening of meso-2,3-difluoro-2,3-dimethyldiazocyclopropane in three solvents: CHCl 3, CHFClBr and CH 3CH(OH)CF 3 (TFIPA). In this study, the achiral reactant leads to enantiomeric allene products, and the question addressed in the study is whether either of the chiral, enantiomerically pure solvents can induce significant enantiomeric excess in the products. The direct dynamics calculations use an empirical valence bond potential for the solute, with empirical parameters optimised against M06-2X/cc-pVTZ density functional results. The results reveal that the exothermic N 2 loss and ring opening promote transient strong solvent–solute interactions withinmore » the first ~100 fs of the reaction. Because of the bifurcating reaction path, these interactions occur at time when the “decision” about which enantiomer of the product to form has yet to be made (at least for many of the trajectories). Hence, it is possible in principle that the solvent could exert a larger-than-normal influence on the course of the reaction. In fact, the results reveal no such effect for CHFClBr but do predict that TFIPA should induce 15.2 ± 2.1% enantiomeric excess. This is roughly an order of magnitude larger than solvent-induced enantiomeric excesses found experimentally in reactions where the conversion of reactant(s) to enantiomeric products occur over separate transition states.« less

Dynamics of electron solvation in I(-)(CH3OH)n clusters (4 ≤ n ≤ 11).

PubMed

Young, Ryan M; Yandell, Margaret A; Neumark, Daniel M

2011-03-28

The dynamics of electron solvation following excitation of the charge-transfer-to-solvent precursor state in iodide-doped methanol clusters, I(-)(CH(3)OH)(n = 4-11), are studied with time-resolved photoelectron imaging. This excitation produces a I···(CH(3)OH)(n)(-) cluster that is unstable with respect to electron autodetachment and whose autodetachment lifetime increases monotonically from ~800 fs to 85 ps as n increases from 4 to 11. The vertical detachment energy (VDE) and width of the excited state feature in the photoelectron spectrum show complex time dependence during the lifetime of this state. The VDE decreases over the first 100-400 fs, then rises exponentially to a maximum with a ~1 ps time constant, and finally decreases by as much as 180 meV with timescales of 3-20 ps. The early dynamics are associated with electron transfer from the iodide to the methanol cluster, while the longer-time changes in VDE are attributed to solvent reordering, possibly in conjunction with ejection of neutral iodine from the cluster. Changes in the observed width of the spectrum largely follow those of the VDEs; the dynamics of both are attributed to the major rearrangement of the solvent cluster during relaxation. The relaxation dynamics are interpreted as a reorientation of at least one methanol molecule and the disruption and formation of the solvent network in order to accommodate the excess charge.

Molecular mechanism of NDMA formation from N,N-dimethylsulfamide during ozonation: quantum chemical insights into a bromide-catalyzed pathway.

PubMed

Trogolo, Daniela; Mishra, Brijesh Kumar; Heeb, Michèle B; von Gunten, Urs; Arey, J Samuel

2015-04-07

During ozonation of drinking water, the fungicide metabolite N,N-dimethylsulfamide (DMS) can be transformed into a highly toxic product, N-nitrosodimethylamine (NDMA). We used quantum chemical computations and stopped-flow experiments to evaluate a chemical mechanism proposed previously to describe this transformation. Stopped-flow experiments indicate a pK(a) = 10.4 for DMS. Experiments show that hypobromous acid (HOBr), generated by ozone oxidation of naturally occurring bromide, brominates the deprotonated DMS(-) anion with a near-diffusion controlled rate constant (7.1 ± 0.6 × 10(8) M(-1) s(-1)), forming Br-DMS(-) anion. According to quantum chemical calculations, Br-DMS has a pK(a) ∼ 9.0 and thus remains partially deprotonated at neutral pH. The anionic Br-DMS(-) bromamine can react with ozone with a high rate constant (10(5 ± 2.5) M(-1) s(-1)), forming the reaction intermediate (BrNO)(SO2)N(CH3)2(-). This intermediate resembles a loosely bound complex between an electrophilic nitrosyl bromide (BrNO) molecule and an electron-rich dimethylaminosulfinate ((SO2)N(CH3)2(-)) fragment, based on inspection of computed natural charges and geometric parameters. This fragile complex undergoes immediate (10(10 ± 2.5) s(-1)) reaction by two branches: an exothermic channel that produces NDMA, and an entropy-driven channel giving non-NDMA products. Computational results bring new insights into the electronic nature, chemical equilibria, and kinetics of the elementary reactions of this pathway, enabled by computed energies of structures that are not possible to access experimentally.

Characterization of supramolecular (H2O)18 water morphology and water-methanol (H2O)15(CH3OH)3 clusters in a novel phosphorus functionalized trimeric amino acid host.

PubMed

Raghuraman, Kannan; Katti, Kavita K; Barbour, Leonard J; Pillarsetty, Nagavarakishore; Barnes, Charles L; Katti, Kattesh V

2003-06-11

Phosphorus functionalized trimeric alanine compounds (l)- and (d)-P(CH(2)NHCH(CH(3))COOH)(3) 2 are prepared in 90% yields by the Mannich reaction of Tris(hydroxymethyl)phosphine 1 with (l)- or (d)- Alanine in aqueous media. The hydration properties of (l)-2 and (d)-2 in water and water-methanol mixtures are described. The crystal structure analysis of (l)-2.4H(2)O, reveals that the alanine molecules pack to form two-dimensional bilayers running parallel to (001). The layered structural motif depicts two closely packed monolayers of 2 each oriented with its phosphorus atoms projected at the center of the bilayer and adjacent monolayers are held together by hydrogen bonds between amine and carboxylate groups. The water bilayers are juxtaposed with the H-bonded alanine trimers leading to 18-membered (H(2)O)(18) water rings. Exposure of aqueous solution of (l)-2 and (d)-2 to methanol vapors resulted in closely packed (l)-2 and (d)-2 solvated with mixed water-methanol (H(2)O)(15)(CH(3)OH)(3) clusters. The O-O distances in the mixed methanol-water clusters of (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH (O-O(average) = 2.857 A) are nearly identical to the O-O distance observed in the supramolecular (H(2)O)(18) water structure (O-O(average) = 2.859 A) implying the retention of the hydrogen bonded structure in water despite the accommodation of hydrophobic methanol groups within the supramolecular (H(2)O)(15)(CH(3)OH)(3) framework. The O-O distances in (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH and in (H(2)O)(18) are very close to the O-O distance reported for liquid water (2.85 A).

Ro-vibrational Spectra of (para-H2 )N -CH4 in He Droplets.

PubMed

Hoshina, Hiromichi; Sliter, Russell; Ravi, Aakash; Kuma, Susumu; Momose, Takamasa; Vilesov, Andrey F

2016-11-18

In this work, we report on the infrared spectroscopic study of clusters of CH 4 molecules with up to N=80 para-hydrogen molecules assembled inside He droplets. Upon increase of the number of the added para-hydrogen molecules up to about N=12, both the rotational constant, B, and the origin frequency of the υ 3 band of CH 4 decrease gradually. In the range of 6 ≤N≤12, the spectra indicate some abrupt changes of B and υ 3 with both values being approximately constant at N≥12. The origin of this effect is discussed. Comparison of the spectra of methane molecules in para-hydrogen clusters to that in solid para-hydrogen is also presented. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reactivity of chemisorbed oxygen atoms and their catalytic consequences during CH4-O2 catalysis on supported Pt clusters.

PubMed

Chin, Ya-Huei Cathy; Buda, Corneliu; Neurock, Matthew; Iglesia, Enrique

2011-10-12

Kinetic and isotopic data and density functional theory treatments provide evidence for the elementary steps and the active site requirements involved in the four distinct kinetic regimes observed during CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants on Pt clusters. These four regimes exhibit distinct rate equations because of the involvement of different kinetically relevant steps, predominant adsorbed species, and rate and equilibrium constants for different elementary steps. Transitions among regimes occur as chemisorbed oxygen (O*) coverages change on Pt clusters. O* coverages are given, in turn, by a virtual O(2) pressure, which represents the pressure that would give the prevalent steady-state O* coverages if their adsorption-desorption equilibrium was maintained. The virtual O(2) pressure acts as a surrogate for oxygen chemical potentials at catalytic surfaces and reflects the kinetic coupling between C-H and O═O activation steps. O* coverages and virtual pressures depend on O(2) pressure when O(2) activation is equilibrated and on O(2)/CH(4) ratios when this step becomes irreversible as a result of fast scavenging of O* by CH(4)-derived intermediates. In three of these kinetic regimes, C-H bond activation is the sole kinetically relevant step, but occurs on different active sites, which evolve from oxygen-oxygen (O*-O*), to oxygen-oxygen vacancy (O*-*), and to vacancy-vacancy (*-*) site pairs as O* coverages decrease. On O*-saturated cluster surfaces, O*-O* site pairs activate C-H bonds in CH(4) via homolytic hydrogen abstraction steps that form CH(3) groups with significant radical character and weak interactions with the surface at the transition state. In this regime, rates depend linearly on CH(4) pressure but are independent of O(2) pressure. The observed normal CH(4)/CD(4) kinetic isotope effects are consistent with the kinetic-relevance of C-H bond activation; identical (16)O(2)-(18)O(2) isotopic exchange rates in the presence or absence of CH(4) show that O(2) activation steps are quasi-equilibrated during catalysis. Measured and DFT-derived C-H bond activation barriers are large, because of the weak stabilization of the CH(3) fragments at transition states, but are compensated by the high entropy of these radical-like species. Turnover rates in this regime decrease with increasing Pt dispersion, because low-coordination exposed Pt atoms on small clusters bind O* more strongly than those that reside at low-index facets on large clusters, thus making O* less effective in H-abstraction. As vacancies (*, also exposed Pt atoms) become available on O*-covered surfaces, O*-* site pairs activate C-H bonds via concerted oxidative addition and H-abstraction in transition states effectively stabilized by CH(3) interactions with the vacancies, which lead to much higher turnover rates than on O*-O* pairs. In this regime, O(2) activation becomes irreversible, because fast C-H bond activation steps scavenge O* as it forms. Thus, O* coverages are set by the prevalent O(2)/CH(4) ratios instead of the O(2) pressures. CH(4)/CD(4) kinetic isotope effects are much larger for turnovers mediated by O*-* than by O*-O* site pairs, because C-H (and C-D) activation steps are required to form the * sites involved in C-H bond activation. Turnover rates for CH(4)-O(2) reactions mediated by O*-* pairs decrease with increasing Pt dispersion, as in the case of O*-O* active structures, because stronger O* binding on small clusters leads not only to less reactive O* atoms, but also to lower vacancy concentrations at cluster surfaces. As O(2)/CH(4) ratios and O* coverages become smaller, O(2) activation on bare Pt clusters becomes the sole kinetically relevant step; turnover rates are proportional to O(2) pressures and independent of CH(4) pressure and no CH(4)/CD(4) kinetic isotope effects are observed. In this regime, turnover rates become nearly independent of Pt dispersion, because the O(2) activation step is essentially barrierless. In the absence of O(2), alternate weaker oxidants, such as H(2)O or CO(2), lead to a final kinetic regime in which C-H bond dissociation on *-* pairs at bare cluster surfaces limit CH(4) conversion rates. Rates become first-order in CH(4) and independent of coreactant and normal CH(4)/CD(4) kinetic isotope effects are observed. In this case, turnover rates increase with increasing dispersion, because low-coordination Pt atoms stabilize the C-H bond activation transition states more effectively via stronger binding to CH(3) and H fragments. These findings and their mechanistic interpretations are consistent with all rate and isotopic data and with theoretical estimates of activation barriers and of cluster size effects on transition states. They serve to demonstrate the essential role of the coverage and reactivity of chemisorbed oxygen in determining the type and effectiveness of surface structures in CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants, as well as the diversity of rate dependencies, activation energies and entropies, and cluster size effects that prevail in these reactions. These results also show how theory and experiments can unravel complex surface chemistries on realistic catalysts under practical conditions and provide through the resulting mechanistic insights specific predictions for the effects of cluster size and surface coordination on turnover rates, the trends and magnitude of which depend sensitively on the nature of the predominant adsorbed intermediates and the kinetically relevant steps.

Synthesis and Characterization of Atomically Precise Copper Nanoclusters

NASA Astrophysics Data System (ADS)

Nguyen, Thuy-Ai Dang

The reactivity of MCl3(eta1-TEMPO) (M = Fe, Al; TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) with a variety of lignin models, including 3,4-dimethoxybenzyl alcohol, 1-phenyl-2-phenoxyethanol and 1,2-diphenyl-2-methoxyethanol is investigated. FeCl3(TEMPO) is effective in cleanly converting these substrates to the corresponding aldehyde or ketone. AlCl3(eta1-TEMPO) is also able to oxidize these substrates, however in a few instances the products of over-oxidation are also observed. In contrast, 2-phenoxyethanol is not oxidized by MCl 3(eta1-TEMPO); instead it likely coordinates to the metal center, forming a 2-phenoxyethoxide complex. Oxidation of activated alkanes by MCl3(eta1-TEMPO) suggests that the reactions proceed via an initial 1-electron concerted proton-electron transfer (CPET) event. Finally, reaction of TEMPO with FeBr3 in Et 2O results in oxidation of the solvent. The copper hydride clusters [Cu14H12(phen) 6(PPh3)4][X]2 (X = Cl, OTf) are obtained in good yields by reaction of [(Ph3P)CuH]6 with 1,10-phenanthroline, in the presence of a halide or pseudohalide source. [Cu14H 12(phen)6(PPh3)4][Cl]2 reacts with CO2 in CH2Cl2, in the presence of excess Ph3P, to form the formate complex, [(Ph3P)2Cu(kappa 2-O2CH)], along with [(phen)(Ph3P)CuCl]. [Cu25H22(PPh3)12]Cl and [Cu 18H17(PPh3)10]Cl, are isolated from the reaction of Cu(OAc) and CuCl with Ph2SiH2, in the presence of PPh3. [Cu25H22(PPh3) 12]Cl formally features partial Cu(0) character. Subsequent reaction with Ph2phen resulted in the isolation of [Cu29Cl 4H22(Ph2phen)12]Cl (Ph2phen = 4,7-diphenyl-1,10-phenanthroline), in good yields. A time-resolved kinetic evaluation of the formation of [Cu29Cl4H22(Ph 2phen)12]Cl reveals that the mechanism of cluster growth is initiated by rapid ligand exchange, followed by slower extrusion of CuCl monomer, transport, and subsequent capture by intact clusters. Two Cu26 nanoclusters, tentatively formulated as [Cu 26H17(PPh3)9(OAc)3] and [Cu26H22(PPh3)10(OAc)2], are isolated from the reaction of Cu(OAc) with Ph2SiH2, in the presence of PPh3. As formulated, [Cu26H 17(PPh3)9(OAc)3] features a magic number N* = 6, which is unprecedented for a copper nanocluster. XANES supports an assignment of more Cu(0) character than [Cu25H 22(PPh3)12]Cl (N* = 2) for this complex. A critical reevaluation of the synthesis and characterization of Cu 8(MPP)4 is reported. This product was reportedly formed by reaction of Cu(NO3)2 with 2-mercapto-5-n-propylpyrimidine (HMPP) and NaBH4, in ethanol, in the presence of [N(C8H 17)4][Br]. However, upon reevaluation, no experimental evidence to support the existence of Cu8(MPP)4 was found. Instead, the material isolated from this reaction is a complex mixture containing [N(C8H17)4]+, Br -, NO3-, 2-mercapto-5-n-propyl-1,6-dihydropyrimidine (H2MPP*), along with the Cu(I) coordination polymer, [Cu(MPP)]n. H2MPP* and [Cu(MPP)]n, as well as the related Cu(I) coordination complexes, [Cu(HMPP*)]n and [Cu2(MPP*)]n are independently synthesized to support these conclusions.

Molybdenum cluster loaded PLGA nanoparticles: An innovative theranostic approach for the treatment of ovarian cancer.

PubMed

Brandhonneur, N; Hatahet, T; Amela-Cortes, M; Molard, Y; Cordier, S; Dollo, G

2018-04-01

We evaluate poly (d,l-lactide-co-glycolide) (PLGA) nanoparticles embedding inorganic molybdenum octahedral cluster for photodynamic therapy of cancer (PDT). Tetrabutyl ammonium salt of Mo 6 Br 14 cluster unit, (TBA) 2 Mo 6 Br 14 , presents promising photosensitization activity in the destruction of targeted cancer cells. Stable cluster loaded nanoparticles (CNPs) were prepared by solvent displacement method showing spherical shapes, zeta potential values around -30 mV, polydispersity index lower than 0.2 and sizes around 100 nm. FT-IR and DSC analysis revealed the lack of strong chemical interaction between the cluster and the polymer within the nanoparticles. In vitro release study showed that (TBA) 2 Mo 6 Br 14 was totally dissolved in 20 min, while CNPs were able to control the release of encapsulated cluster. In vitro cellular viability studies conducted on A2780 ovarian cancer cell line treated up to 72 h with cluster or CNPs did not show any sign of toxicity in concentrations up to 20 µg/ml. This concentration was selected for photo-activation test on A2780 cells and CNPs were able to generate oxygen singlet resulting in a decrease of the cellular viability up to 50%, respectively compared to non-activated conditions. This work presents (TBA) 2 Mo 6 Br 14 as a novel photosensitizer for PDT and suggests PLGA nanoparticles as an efficient delivery system intended for tumor targeting. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparison of rhenium–porphyrin dyads for CO2 photoreduction: photocatalytic studies and charge separation dynamics studied by time-resolved IR spectroscopy† †Electronic supplementary information (ESI) available: NMR spectra, cyclic voltammograms, crystallographic data, fluorescence data, spectra from photoreactions and photocatalytic data. CCDC 1406000 and 1406001. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c5sc02099a

PubMed Central

Windle, Christopher D.; Summers, Peter A.; Sun, Xue Zhong; Whitwood, Adrian C.

2015-01-01

We report a study of the photocatalytic reduction of CO2 to CO by zinc porphyrins covalently linked to [ReI(2,2′-bipyridine)(CO)3L]+/0 moieties with visible light of wavelength >520 nm. Dyad 1 contains an amide C6H4NHC(O) link from porphyrin to bipyridine (Bpy), Dyad 2 contains an additional methoxybenzamide within the bridge C6H4NHC(O)C6H3(OMe)NHC(O), while Dyad 3 has a saturated bridge C6H4NHC(O)CH2; each dyad is studied with either L = Br or 3-picoline. The syntheses, spectroscopic characterisation and cyclic voltammetry of Dyad 3 Br and [Dyad 3 pic]OTf are described. The photocatalytic performance of [Dyad 3 pic]OTf in DMF/triethanolamine (5 : 1) is approximately an order of magnitude better than [Dyad 1 pic]PF6 or [Dyad 2 pic]OTf in turnover frequency and turnover number, reaching a turnover number of 360. The performance of the dyads with Re–Br units is very similar to that of the dyads with [Re–pic]+ units in spite of the adverse free energy of electron transfer. The dyads undergo reactions during photocatalysis: hydrogenation of the porphyrin to form chlorin and isobacteriochlorin units is detected by visible absorption spectroscopy, while IR spectroscopy reveals replacement of the axial ligand by a triethanolaminato group and insertion of CO2 into the latter to form a carbonate. Time-resolved IR spectra of [Dyad 2 pic]OTf and [Dyad 3 pic]OTf (560 nm excitation in CH2Cl2) demonstrated electron transfer from porphyrin to Re(Bpy) units resulting in a shift of ν(CO) bands to low wavenumbers. The rise time of the charge-separated species for [Dyad 3 pic]OTf is longest at 8 (±1) ps and its lifetime is also the longest at 320 (±15) ps. The TRIR spectra of Dyad 1 Br and Dyad 2 Br are quite different showing a mixture of 3MLCT, IL and charge-separated excited states. In the case of Dyad 3 Br, the charge-separated state is absent altogether. The TRIR spectra emphasize the very different excited states of the bromide complexes and the picoline complexes. Thus, the similarity of the photocatalytic data for bromide and picoline dyads suggests that they share common intermediates. Most likely, these involve hydrogenation of the porphyrin and substitution of the axial ligand at rhenium. PMID:29861927

Cyclodextrin Complexes of Reduced Bromonoscapine in Guar Gum Microspheres Enhance Colonic Drug Delivery

PubMed Central

2015-01-01

Here, we report improved solubility and enhanced colonic delivery of reduced bromonoscapine (Red-Br-Nos), a cyclic ether brominated analogue of noscapine, upon encapsulation of its cyclodextrin (CD) complexes in bioresponsive guar gum microspheres (GGM). Phase–solubility analysis suggested that Red-Br-Nos complexed with β-CD and methyl-β-CD in a 1:1 stoichiometry, with a stability constant (Kc) of 2.29 × 103 M–1 and 4.27 × 103 M–1. Fourier transforms infrared spectroscopy indicated entrance of an O–CH2 or OCH3–C6H4–OCH3 moiety of Red-Br-Nos in the β-CD or methyl-β-CD cavity. Furthermore, the cage complex of Red-Br-Nos with β-CD and methyl-β-CD was validated by several spectral techniques. Rotating frame Overhauser enhancement spectroscopy revealed that the Ha proton of the OCH3–C6H4–OCH3 moiety was closer to the H5 proton of β-CD and the H3 proton of the methyl-β-CD cavity. The solubility of Red-Br-Nos in phosphate buffer saline (PBS, pH ∼ 7.4) was improved by ∼10.7-fold and ∼21.2-fold when mixed with β-CD and methyl-β-CD, respectively. This increase in solubility led to a favorable decline in the IC50 by ∼2-fold and ∼3-fold for Red-Br-Nos−β-CD-GGM and Red-Br-Nos–methyl-β-CD-GGM formulations respectively, compared to free Red-Br-Nos−β-CD and Red-Br-Nos–methyl-β-CD in human colon HT-29 cells. GGM-bearing drug complex formulations were found to be highly cytotoxic to the HT-29 cell line and further effective with simultaneous continuous release of Red-Br-Nos from microspheres. This is the first study to showing the preparation of drug-complex loaded GGMS for colon delivery of Red-Br-Nos that warrants preclinical assessment for the effective management of colon cancer. PMID:25350222

Experimental and theoretical study on activation of the C-H bond in pyridine by [M(m)]- (M = Cu, Ag, Au, m = 1-3).

PubMed

Liu, Xiao-Jing; Hamilton, I P; Han, Ke-Li; Tang, Zi-Chao

2010-09-21

Activation of the C-H bond of pyridine by [M(m)](-) (M = Cu, Ag, Au, m = 1-3) is investigated by experiment and theory. Complexes of coinage metal clusters and the pyridyl group, [M(m)-C(5)H(4)N](-), are produced from reactions between metal clusters formed by laser ablation of coinage metal samples and pyridine molecules seeded in argon carrier gas. We examine the structure and formation mechanism of these pyridyl-coinage metal complexes. Our study shows that C(5)H(4)N bonds to the metal clusters through a M-C sigma bond and [M(m)-C(5)H(4)N](-) is produced via a stepwise mechanism. The first step is a direct insertion reaction between [M(m)](-) and C(5)H(5)N with activation of the C-H bond to yield the intermediate [HM(m)-C(5)H(4)N](-). The second step is H atom abstraction by a neutral metal atom to yield [M(m)-C(5)H(4)N](-).

Convective Transport of Very-short-lived Bromocarbons to the Stratosphere

NASA Technical Reports Server (NTRS)

Liang, Qing; Atlas, Elliot Leonard; Blake, Donald Ray; Dorf, Marcel; Pfeilsticker, Klaus August; Schauffler, Sue Myhre

2014-01-01

We use the NASA GEOS Chemistry Climate Model (GEOSCCM) to quantify the contribution of two most important brominated very short-lived substances (VSLS), bromoform (CHBr3) and dibromomethane (CH2Br2), to stratospheric bromine and its sensitivity to convection strength. Model simulations suggest that the most active transport of VSLS from the marine boundary layer through the tropopause occurs over the tropical Indian Ocean, the Western Pacific warm pool, and off the Pacific coast of Mexico. Together, convective lofting of CHBr3 and CH2Br2 and their degradation products supplies 8 ppt total bromine to the base of the Tropical Tropopause Layer (TTL, 150 hPa), similar to the amount of VSLS organic bromine available in the marine boundary layer (7.8-8.4 ppt) in the above active convective lofting regions. Of the total 8 ppt VSLS-originated bromine that enters the base of TTL at 150 hPa, half is in the form of source gas injection (SGI) and half as product gas injection (PGI). Only a small portion (< 10%) the VSLS-originated bromine is removed via wet scavenging in the TTL before reaching the lower stratosphere. On global and annual average, CHBr3 and CH2Br2, together, contribute 7.7 pptv to the present-day inorganic bromine in the stratosphere. However, varying model deep convection strength between maximum and minimum convection conditions can introduce a 2.6 pptv uncertainty in the contribution of VSLS to inorganic bromine in the stratosphere (BryVSLS). Contrary to the conventional wisdom, minimum convection condition leads to a larger BryVSLS as the reduced scavenging in soluble product gases, thus a significant increase in PGI (2-3 ppt), greatly exceeds the relative minor decrease in SGI (a few 10ths ppt.

First-principles thermodynamics study of phase stability in inorganic halide perovskite solid solutions

NASA Astrophysics Data System (ADS)

Bechtel, Jonathon S.; Van der Ven, Anton

2018-04-01

Halide substitution gives rise to a tunable band gap as a function of composition in halide perovskite materials. However, photoinduced phase segregation, observed at room temperature in mixed halide A Pb (IxBr1-x) 3 systems, limits open circuit voltages and decreases photovoltaic device efficiencies. We investigate equilibrium phase stability of orthorhombic P n m a γ -phase CsM (XxY1-x) 3 perovskites where M is Pb or Sn, and X and Y are Br, Cl, or I. Finite-temperature phase diagrams are constructed using a cluster expansion effective Hamiltonian parameterized from first-principles density-functional-theory calculations. Solid solution phases for CsM (IxBr1-x) 3 and CsM (BrxCl1-x) 3 are predicted to be stable well below room temperature while CsM (IxCl1-x) 3 systems have miscibility gaps that extend above 400 K. The height of the miscibility gap correlates with the difference in volume between end members. Also layered ground states are found on the convex hull at x =2 /3 for CsSnBr2Cl ,CsPbI2Br , and CsPbBrCl2. The impact of these ground states on the finite temperature phase diagram is discussed in the context of the experimentally observed photoinduced phase segregation.

Phosphines bearing alkyne substituents: synthesis and hydrophosphination polymerization.

PubMed

Greenberg, Sharonna; Stephan, Douglas W

2009-09-07

A synthetic route is described for a series of phosphines bearing pendant alkyne substituents, from the conversion of BrC(6)H(2)R(2)C[triple bond]CR' (R = Me, i-Pr; R' = Ph, SiMe(3)) to [(mu-Br)Cu(Et(2)N)(2)PC(6)H(2)R(2)C[triple bond]CR'](2) and subsequently to Cl(2)PC(6)H(2)R(2)C[triple bond]CR' and H(2)PC(6)H(2)R(2)C[triple bond]CR'. Lithiation and subsequent alkylation yield the secondary phosphines R(H)PC(6)H(2)(i-Pr)(2)C[triple bond]CPh (R = CH(2)i-Pr, CH(2)Ph). Intermolecular hydrophosphination-polymerization is used to prepare the polymeric species [RPC(6)H(2)(i-Pr)(2)CH=CPh](n), which can then be sulfurized to give [RP(S)C(6)H(2)(i-Pr)(2)CH=CPh](n). The polymeric products were characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and gel permeation chromatography. These data indicate a degree of polymerization (DP(n)) of up to 60. Discussion of the mechanism is augmented with gas-phase density functional theory calculations.

Biogeochemical cycles at the sulfate-methane transition zone (SMTZ) and geochemical characteristics of the pore fluids offshore southwestern Taiwan

NASA Astrophysics Data System (ADS)

Hu, Ching-Yi; Frank Yang, Tsanyao; Burr, George S.; Chuang, Pei-Chuan; Chen, Hsuan-Wen; Walia, Monika; Chen, Nai-Chen; Huang, Yu-Chun; Lin, Saulwood; Wang, Yunshuen; Chung, San-Hsiung; Huang, Chin-Da; Chen, Cheng-Hong

2017-11-01

In this study, we used pore water dissolved inorganic carbon (DIC), SO42-, Ca2+ and Mg2+ gradients at the sulfate-methane transition zone (SMTZ) to estimate biogeochemical fluxes for cored sediments collected offshore SW Taiwan. Net DIC flux changes (ΔDIC-Prod) were applied to determine the proportion of sulfate consumption by organic matter oxidation (heterotrophic sulfate reduction) and anaerobic oxidation of methane (AOM), and to determine reliable CH4 fluxes at the SMTZ. Our results show that SO42- profiles are mainly controlled by AOM rather than heterotrophic sulfate reduction. Refinement of CH4 flux estimates enhance our understanding of methane abundance from deep carbon reservoirs to the SMTZ. Concentrations of chloride (Cl-), bromide (Br-) and iodide (I-) dissolved in pore water were used to identify potential sources that control fluid compositions and the behavior of dissolved ions. Constant Cl- concentrations throughout ∼30 m sediment suggest no influence of gas hydrates for the compositions within the core. Bromide (Br-) and Iodine (I-) concentrations increase with sediment depth. The I-/Br- ratio appears to reflect organic matter degradation. SO42- concentrations decrease with sediment depth at a constant rate, and sediment depth profiles of Br- and I- concentrations suggests diffusion as the main transport mechanism. Therefore diffusive flux calculations are reasonable. Coring sites with high CH4 fluxes are more common in the accretionary wedge, amongst thrust faults and fractures, than in the passive continental margin offshore southwestern Taiwan. AOM reactions are a major sink for CH4 passing upward through the SMTZ and prevent high methane fluxes in the water column and to the atmosphere.

Two-Photon Absorption in Organometallic Bromide Perovskites.

PubMed

Walters, Grant; Sutherland, Brandon R; Hoogland, Sjoerd; Shi, Dong; Comin, Riccardo; Sellan, Daniel P; Bakr, Osman M; Sargent, Edward H

2015-09-22

Organometallic trihalide perovskites are solution-processed semiconductors that have made great strides in third-generation thin film light-harvesting and light-emitting optoelectronic devices. Recently, it has been demonstrated that large, high-purity single crystals of these perovskites can be synthesized from the solution phase. These crystals' large dimensions, clean bandgap, and solid-state order have provided us with a suitable medium to observe and quantify two-photon absorption in perovskites. When CH3NH3PbBr3 single crystals are pumped with intense 800 nm light, we observe band-to-band photoluminescence at 572 nm, indicative of two-photon absorption. We report the nonlinear absorption coefficient of CH3NH3PbBr3 perovskites to be 8.6 cm GW(-1) at 800 nm, comparable to epitaxial single-crystal semiconductors of similar bandgap. We have leveraged this nonlinear process to electrically autocorrelate a 100 fs pulsed laser using a two-photon perovskite photodetector. This work demonstrates the viability of organometallic trihalide perovskites as a convenient and low-cost nonlinear absorber for applications in ultrafast photonics.

Heat-induced changes to lipid molecular structure in Vimy flaxseed: Spectral intensity and molecular clustering

NASA Astrophysics Data System (ADS)

Yu, Peiqiang; Damiran, Daalkhaijav

2011-06-01

Autoclaving was used to manipulate nutrient utilization and availability. The objectives of this study were to characterize any changes of the functional groups mainly associated with lipid structure in flaxseed ( Linum usitatissimum, cv. Vimy), that occurred on a molecular level during the treatment process using infrared Fourier transform molecular spectroscopy. The parameters included lipid CH 3 asymmetric (ca. 2959 cm -1), CH 2 asymmetric (ca. 2928 cm -1), CH 3 symmetric (ca. 2871 cm -1) and CH 2 symmetric (ca. 2954 cm -1) functional groups, lipid carbonyl C dbnd O ester group (ca. 1745 cm -1), lipid unsaturation group (CH attached to C dbnd C) (ca. 3010 cm -1) as well as their ratios. Hierarchical cluster analysis (CLA) and principal components analysis (PCA) were conducted to identify molecular spectral differences. Flaxseed samples were kept raw for the control or autoclaved in batches at 120 °C for 20, 40 or 60 min for treatments 1, 2 and 3, respectively. Molecular spectral analysis of lipid functional group ratios showed a significant decrease ( P < 0.05) in the CH 2 asymmetric to CH 3 asymmetric stretching band peak intensity ratios for the flaxseed. There were linear and quadratic effects ( P < 0.05) of the treatment time from 0, 20, 40 and 60 min on the ratios of the CH 2 asymmetric to CH 3 asymmetric stretching vibration intensity. Autoclaving had no significant effect ( P > 0.05) on lipid carbonyl C dbnd O ester group and lipid unsaturation group (CH attached to C dbnd C) (with average spectral peak area intensities of 138.3 and 68.8 IR intensity units, respectively). Multivariate molecular spectral analyses, CLA and PCA, were unable to make distinctions between the different treatment original spectra at the CH 3 and CH 2 asymmetric and symmetric region (ca. 2988-2790 cm -1). The results indicated that autoclaving had an impact to the mid-infrared molecular spectrum of flaxseed to identify heat-induced changes in lipid conformation. A future study is needed to quantify the relationship between lipid molecular structure changes and functionality/availability.

Selective cyclopalladation of R3P=NCH2Aryl iminophosphoranes. Experimental and computational study.

PubMed

Bielsa, Raquel; Navarro, Rafael; Urriolabeitia, Esteban P; Lledós, Agustí

2007-11-26

The orientation of the orthopalladation of iminophosphoranes R3P=NCH2Aryl (R=Ph, Aryl=Ph (1a), C6H(4)-2-Br (1b), C6H4-Me-2 (1e), C6H3-(Me)(2)-2,5 (1f); R=p-tolyl, Aryl=Ph (1c); R=m-tolyl, Aryl=Ph (1d); R3P=MePh2P, and Aryl=Ph (1g)) has been studied. 1a reacts with Pd(OAc)2 (OAc=acetate) giving endo-[Pd(micro-Cl){C,N-C6H4(PPh2=NCH2Ph)-2}]2 (3a), while exo-[Pd(micro-Br){C,N-C6H4(CH2N=PPh3)-2}]2 (3b) could only be obtained by the oxidative addition of 1b to Pd2(dba)3. The endo form of the metalated ligand is favored kinetically and thermodynamically, as shown by the conversion of exo-[Pd(micro-OAc){C,N-C6H4(CH2N=PPh3)-2}]2 (2b) into endo-[Pd(micro-OAc){C,N-C6H4(PPh2=NCH2Ph)-2}]2 (2a) in refluxing toluene. The orientation of the reaction is not affected by the introduction of electron-releasing substituents at the Ph rings of the PR3 (1c and 1d) or the benzyl units (1e and 1f), and endo complexes (3c-3f) were obtained in all cases. The palladation of MePh2P=NCH2Ph (1g) can be regioselectively oriented as a function of the solvent. The exo isomer [Pd(micro-Cl){C6H4(CH2N=PPh2Me)-2}]2 (exo-3g) is obtained in refluxing CH2Cl2, while endo-[Pd(micro-Cl){C,N-C6H4(PPh(Me)=NCH2Ph)-2}]2 (endo-3g) can be isolated as a single isomer in refluxing toluene. In this case, the exo metalation is kinetically favored while an endo process occurs under thermodynamic control, as shown through the rearrangement of [Pd(micro-OAc){C6H4(CH2N=PPh2Me)-2}]2 (exo-2g) into [Pd(micro-OAc){C,N-C6H4(P(Ph)Me=NCH2Ph)-2}]2 (endo-2g) in refluxing toluene. The preference for the endo palladation of 1a and the kinetic versus thermodynamic control in 1g has been explained through DFT studies of the reaction mechanism.

Gold(I) and Gold(III) Complexes of Cyclic (Alkyl)(amino)carbenes

PubMed Central

2016-01-01

The chemistry of Au(I) complexes with two types of cyclic (alkyl)(amino)carbene (CAAC) ligands has been explored, using the sterically less demanding dimethyl derivative Me2CAAC and the 2-adamantyl ligand AdCAAC. The conversion of (AdCAAC)AuCl into (AdCAAC)AuOH by treatment with KOH is significantly accelerated by the addition of tBuOH. (AdCAAC)AuOH is a convenient starting material for the high-yield syntheses of (AdCAAC)AuX complexes by acid/base and C–H activation reactions (X = OAryl, CF3CO2, N(Tf)2, C2Ph, C6F5, C6HF4, C6H2F3, CH2C(O)C6H4OMe, CH(Ph)C(O)Ph, CH2SO2Ph), while the cationic complexes [(AdCAAC)AuL]+ (L = CO, CNtBu) and (AdCAAC)AuCN were obtained by chloride substitution from (AdCAAC)AuCl. The reactivity toward variously substituted fluoroarenes suggests that (AdCAAC)AuOH is able to react with C–H bonds with pKa values lower than about 31.5. This, together with the spectroscopic data, confirm the somewhat stronger electron-donor properties of CAAC ligands in comparison to imidazolylidene-type N-heterocyclic carbenes (NHCs). In spite of this, the oxidation of Me2CAAC and AdCAAC gold compounds is much less facile. Oxidations proceed with C–Au cleavage by halogens unless light is strictly excluded. The oxidation of (AdCAAC)AuCl with PhICl2 in the dark gives near-quantitative yields of (AdCAAC)AuCl3, while [Au(Me2CAAC)2]Cl leads to trans-[AuCl2(Me2CAAC)2]Cl. In contrast to the chemistry of imidazolylidene-type gold NHC complexes, oxidation products containing Au–Br or Au–I bonds could not be obtained; whereas the reaction with CsBr3 cleaves the Au–C bond to give mixtures of [AdCAAC-Br]+[AuBr2]− and [(AdCAAC-Br)]+ [AuBr4]−, the oxidation of (AdCAAC)AuI with I2 leads to the adduct (AdCAAC)AuI·I2. Irrespective of the steric demands of the CAAC ligands, their gold complexes proved more resistant to oxidation and more prone to halogen cleavage of the Au–C bonds than gold(I) complexes of imidazole-based NHC ligands. PMID:26146436

Photochemistry of bromoacetylene - Formation of HBr and quenching of excited Br/4 2P 0 1/2/

NASA Technical Reports Server (NTRS)

Laufer, A. H.

1979-01-01

The photolysis of bromacetylene is examined by means of vacuum ultraviolet flash photolysis-kinetic spectroscopy, with attention given to the production of Br atoms in the 2P 0 3/2 and 2P 0 1/2 states, the production of HBr, and UV absorption attributable to the ethynyl radical. Although Br(2P 0 1/2) and Br(2P 0 3/2) were both directly observed at the shortest delay time after the flash, strongly indicating the presence of the ethynyl radical, transient absorption by C2H was not detected in the range 125 to 180 nm. Quenching rate constants for the decay of the 2P 0 1/2 state of Br, which is observed to form concurrently with the ground state, are derived for quenching by He, CH2Br, CF4, and D2 from the pseudo-first-order decay rates. HBr was observed as a secondary photolysis product, and a model of its formation by the exothermic reaction of ground-state atoms with C2HBR, coupled with the secondary production of Br atoms, is found to agree well with the experiment.

Thermodynamic and hydrochemical controls on CH4 in a coal seam gas and overlying alluvial aquifer: new insights into CH4 origins

PubMed Central

Owen, D. Des. R.; Shouakar-Stash, O.; Morgenstern, U.; Aravena, R.

2016-01-01

Using a comprehensive data set (dissolved CH4, δ13C-CH4, δ2H-CH4, δ13C-DIC, δ37Cl, δ2H-H2O, δ18O-H2O, Na, K, Ca, Mg, HCO3, Cl, Br, SO4, NO3 and DO), in combination with a novel application of isometric log ratios, this study describes hydrochemical and thermodynamic controls on dissolved CH4 from a coal seam gas reservoir and an alluvial aquifer in the Condamine catchment, eastern Surat/north-western Clarence-Moreton basins, Australia. δ13C-CH4 data in the gas reservoir (−58‰ to −49‰) and shallow coal measures underlying the alluvium (−80‰ to −65‰) are distinct. CO2 reduction is the dominant methanogenic pathway in all aquifers, and it is controlled by SO4 concentrations and competition for reactants such as H2. At isolated, brackish sites in the shallow coal measures and alluvium, highly depleted δ2H-CH4 (<310‰) indicate acetoclastic methanogenesis where SO4 concentrations inhibit CO2 reduction. Evidence of CH4 migration from the deep gas reservoir (200–500 m) to the shallow coal measures (<200 m) or the alluvium was not observed. The study demonstrates the importance of understanding CH4 at different depth profiles within and between aquifers. Further research, including culturing studies of microbial consortia, will improve our understanding of the occurrence of CH4 within and between aquifers in these basins. PMID:27578542

CONTRIBUTION OF INSPIRATORY FLOW TO ACTIVATION OF EGFR, RAS, MAPK, ATF-2 AND C-JUN DURING LUNG STRETCH

EPA Science Inventory

Contribution of Inspiratory Flow to Activation of EGFR, Ras, MAPK, ATF-2 and c-Jun during Lung Stretch

R. Silbajoris 1, Z. Li 2, J. M. Samet 1 and Y. C. Huang 1. 1 NHEERL, ORD, US EPA, RTP, NC and 2 CEMALB, UNC-CH, Chapel Hill, NC .

Mechanical ventilation with larg...

Multifunctional silicon surfaces: reaction of dichlorocarbene generated from Seyferth reagent with hydrogen-terminated silicon (111) surfaces.

PubMed

Liu, Wenjun; Sharp, Ian D; Tilley, T Don

2014-01-14

Insertion of dichlorocarbene (:CCl2), generated by decomposition of the Seyferth reagent PhHgCCl2Br, into the Si-H bond of a tertiary silane to form a Si-CCl2H group is an efficient homogeneous, molecular transformation. A heterogeneous version of this reaction, between PhHgCCl2Br and a silicon (111) surface terminated by tertiary Si-H bonds, was studied using a combination of surface-sensitive infrared and X-ray photoelectron spectroscopies. The insertion of dichlorocarbene into surface Si-H bonds parallels the corresponding reaction of silanes in solution, to produce surface-bound dichloromethyl groups (Si-CCl2H) covering ∼25% of the silicon surface sites. A significant fraction of the remaining Si-H bonds on the surface was converted to Si-Cl/Br groups during the same reaction, with PhHgCCl2Br serving as a halogen atom source. The presence of two distinct environments for the chlorine atoms (Si-CCl2H and Si-Cl) and one type of bromine atom (Si-Br) was confirmed by Cl 2p, Br 3d, and C 1s X-ray photoelectron spectroscopy. The formation of reactive, halogen-terminated atop silicon sites was also verified by reaction with sodium azide or the Grignard reagent (CH3MgBr), to produce Si-N3 or Si-Me functionalities, respectively. Thus, reaction of a hydrogen-terminated silicon (111) surface with PhHgCCl2Br provides a facile route to multifunctional surfaces possessing both stable silicon-carbon and labile silicon-halogen sites, in a single pot synthesis. The reactive silicon-halogen groups can be utilized for subsequent transformations and, potentially, the construction of more complex organic-silicon hybrid systems.

Infrared spectroscopy of water clusters isolated in methane matrices: Effects of isotope substitution and annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamakawa, Koichiro, E-mail: koichiro.yamakawa@gakushuin.ac.jp; Ehara, Namika; Ozawa, Nozomi

2016-07-15

Using infrared-active solvents of CH{sub 4} and CD{sub 4} for matrix isolation, we measured infrared spectra of H{sub 2}O and D{sub 2}O clusters at 7 K. The solute-concentration dependence of the spectrum of H{sub 2}O clusters in a CH{sub 4} matrix was investigated and was used for the peak assignment. Annealing procedures were found to promote the size growth of water clusters in methane matrices for all the combinations of (H{sub 2}O, CH{sub 4}), (H{sub 2}O, CD{sub 4}), (D{sub 2}O, CH{sub 4}), and (D{sub 2}O, CD{sub 4}). We also monitored the ν{sub 3} absorption due to methane to find themore » annealing-induced structural change only of solid CH{sub 4}. The matrix effects on the vibrations of the clusters are discussed on the basis of “T{sub c} plots”, where their frequencies are plotted as a function of the square root of the matrix critical temperature, T{sub c}. The obtained plots assure the validity of the assignment of the cluster peaks.« less

Adsorption of Bromine on Gold Nanoclusters

NASA Astrophysics Data System (ADS)

Salvo, Christopher; Keagy, Josiah; Yarmoff, Jory

Small metal nanoclusters are extremely effective as catalysts, with rates that rival those of enzymes in biological systems. The first step in a catalytic reaction is the adsorption of a precursor molecule. The neutralization of alkali projectiles during low energy ion scattering (LEIS), which is acutely sensitive to the local electrostatic potential a few Å's above the surface, is used here to probe Au nanoclusters grown on SiO2 as they are reacted with Br2. Previous work had demonstrated very efficient neutralization in scattering from small catalytically active Au clusters, which was interpreted as an indication that the bare clusters are negatively charged. X-ray photoelectron spectroscopy and LEIS show little or no Br signal after exposing SiO2 and Au foil to Br2, suggesting that adsorption does not occur because the Br-Br bond does not break. Dissociative adsorption occurs rapidly, however, when small Au nanoclusters are reacted with Br2. 1.5 keV Na+ ions scattered from the Au clusters show a decrease in the neutralization probability as Br is reacted, indicating that adsorption results in charge being transferred from the cluster to the Br adatom. This material is based upon work supported by the National Science Foundation under CHE - 1611563.

On the Structure of Some Pentaerythritol-Related Molecular Crystals with Pseudotetrahedral Molecular Structure. Ordered Structure of 2,2-Bis(bromomethyl)-1,3-propanediol and Orientationally Disordered Structure of 2-Chloromethyl-2-methyl-1,3-dichloropropane; 35Cl NQR

NASA Astrophysics Data System (ADS)

Dou, Shi-qi; Fuess, Hartmut; Strauß, Roman; Weiss, Alarich

1996-06-01

C(CH2Cl)3(CH3), melting point Tm = 291.3 K, shows in the DTA/DSC experiment a phase tran-sition from an orientationally disordered plastic phase I into an ordered phase II at TI ⃗ II = 235.9 K. From 77 K up to TII ⃗ I the 35Cl NQR spectrum is a triplet with (ν in MHz, T=77 K) ν1 = 34.213, ν2 = 34.183, ν3 = 33.786. The 35Cl NQR fade-out temperature Tf = 247 K coincides with TII ⃗ I found from the DSC experiment. The plastic phase of 2-chloromethyl-2-methyl-l,3-propanediol is cubic bcc, Im3m, Z = 2 and the lattice constant increases linearly 755 pm at 235 K to 768 pm at 283 K. In the heating cycle we found (ΔH in kJ/mol): ΔHII ⃗ I = 12.0, ΔSm/R = 1.0. The compound belongs to the group of plastic molecules formed by ellipsoid like distorted tetrahedra and is derived by substitution from methane. The crystal structure of 2,2-bis(bromomethyl)-1,3-propanediol was determined. DTA-DSC show that an orientationally disordered plastic phase does not exist. At room temperature C(CH2Br)2(CH2OH)2 crystallizes monoclinic, space group Cc, Z = 4, a = 628.2 pm, 6 = 2015.5 pm, c = 659.6 pm, β = 94.27°. The molecules interact by intermolecular hydrogen bonds between the OH-groups and by van der Waals forces Br…Br.

Tetrel bond of pseudohalide anions with XH3F (X = C, Si, Ge, and Sn) and its role in SN2 reaction.

PubMed

Liu, Mingxiu; Li, Qingzhong; Cheng, Jianbo; Li, Wenzuo; Li, Hai-Bei

2016-12-14

The complexes of XH 3 F⋯N 3 - /OCN - /SCN - (X = C, Si, Ge, and Sn) have been investigated at the MP2/aug-cc-pVTZ(PP) level. The σ-hole of X atom in XH 3 F acts as a Lewis acid forming a tetrel bond with pseudohalide anions. Interaction energies of these complexes vary from -8 to -50 kcal/mol, mainly depending on the nature of X and pseudohalide anions. Charge transfer from N/O/S lone pair to X-F and X-H σ * orbitals results in the stabilization of these complexes, and the former orbital interaction is responsible for the large elongation of X-F bond length and the remarkable red shift of its stretch vibration. The tetrel bond in the complexes of XH 3 F (X = Si, Ge, and Sn) exhibits a significant degree of covalency with XH 3 F distorted significantly in these complexes. A breakdown of the individual forces involved attributes the stability of the interaction to mainly electrostatic energy, with a relatively large contribution from polarization. The transition state structures that connect the two minima for CH 3 Br⋯N 3 - complex have been localized and characterized. The energetic, geometrical, and topological parameters of the complexes were analyzed in the different stages of the S N 2 reaction N 3 - + CH 3 Br → Br - + CH 3 N 3 .

On the fate of laser-produced NH 2 in a constrained pulsed expansion of trimethylamine alane and NH 3

NASA Astrophysics Data System (ADS)

Demchuk, Alexander; Cahill, John J.; Simpson, Steven; Koplitz, Brent

2001-11-01

The effects of both 193 nm radiation and NH 3 on an expansion of trimethylamine alane (TMAA) have been studied. In neat TMAA, 193 nm radiation induces small but significant clustering. When NH 3 is introduced in the absence of 193 nm photons, no visible reaction occurs. However, when NH 3 is introduced along with 193 nm photons, the H 3Al:N(CH 3) 3 parent molecule is completely replaced by H 3AlNH 2. Moreover, the clustering channels observed with neat TMAA disappear. The apparent stability or inertness of the R 3MNH 2 (R=H, CH 3 or C 2H 5; M=Ga or Al) species in a variety of metal nitride reactive environments is discussed.

Kinetics and mechanism studies of switching and association reactions involving Na + -ligand complexes

NASA Astrophysics Data System (ADS)

Yang, X.; Castleman, A. W., Jr.

1990-08-01

The kinetics and mechanisms of the reactions of Na+ṡ(X)n=0-3, X=water, ammonia, and methanol with CH3CN, CH3COCH3, CH3CHO, CH3COOH, CH3COOCH3, NH3, CH3OH, and CH3-O-C2H4-O-CH3(DMOE) were studied at ambient temperature under different pressures. All of the switching (substitution) reactions proceed at near-collision rate and show little dependence on the flow tube pressure, the nature and size of the ligand, or the type of core ions. Interestingly, all of the measured rate constants agree well with predictions based on the parametrized trajectory calculations of Su and Chesnavich [J. Chem. Phys. 76, 5183 (1982)]. The reactions of the bare sodium ion with all neutrals proceed via a three-body association mechanism and the measured rate constants cover a large range from a slow association reaction with NH3, to a near-collision rate with DMOE. The lifetimes and the dissociation rate constants of the intermediate complexes deduced using the parametrized trajectory results, combined with the experimentally determined rates, compare fairly well with predictions based on RRKM theory. The calculations also account for the large isotope effect observed for the clustering of ND3 and NH3 to Na+.

Color-Pure Violet-Light-Emitting Diodes Based on Layered Lead Halide Perovskite Nanoplates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Dong; Peng, Yuelin; Fu, Yongping

Violet electroluminescence is rare in both inorganic and organic light-emitting diodes (LEDs). Low-cost and room- temperature solution-processed lead halide perovskites with high- efficiency and color-tunable photoluminescence are promising for LEDs. Here, we report room-temperature color-pure violet LEDs based on a two-dimensional lead halide perovskite material, namely, 2-phenylethylammonium (C 6H 5CH 2CH 2NH 3 +, PEA) lead bromide [(PEA) 2PbBr 4]. The natural quantum confinement of two-dimen- sional layered perovskite (PEA) 2PbBr 4 allows for photoluminescence of shorter wavelength (410 nm) than its three-dimensional counterpart. By converting as-deposited polycrystalline thin films to micrometer-sized (PEA) 2PbBr 4 nanoplates using solvent vapor annealing,more » we successfully integrated this layered perovskite material into LEDs and achieved efficient room-temperature violet electroluminescence at 410 nm with a narrow bandwidth. This conversion to nanoplates significantly enhanced the crystallinity and photophysical properties of the (PEA) 2PbBr 4 samples and the external quantum efficiency of the violet LED. Finally, the solvent vapor annealing method reported herein can be generally applied to other perovskite materials to increase their grain size and, ultimately, improve the performance of optoelectronic devices based on perovskite materials.« less

Color-Pure Violet-Light-Emitting Diodes Based on Layered Lead Halide Perovskite Nanoplates

DOE PAGES

Liang, Dong; Peng, Yuelin; Fu, Yongping; ...

2016-06-23

Violet electroluminescence is rare in both inorganic and organic light-emitting diodes (LEDs). Low-cost and room- temperature solution-processed lead halide perovskites with high- efficiency and color-tunable photoluminescence are promising for LEDs. Here, we report room-temperature color-pure violet LEDs based on a two-dimensional lead halide perovskite material, namely, 2-phenylethylammonium (C 6H 5CH 2CH 2NH 3 +, PEA) lead bromide [(PEA) 2PbBr 4]. The natural quantum confinement of two-dimen- sional layered perovskite (PEA) 2PbBr 4 allows for photoluminescence of shorter wavelength (410 nm) than its three-dimensional counterpart. By converting as-deposited polycrystalline thin films to micrometer-sized (PEA) 2PbBr 4 nanoplates using solvent vapor annealing,more » we successfully integrated this layered perovskite material into LEDs and achieved efficient room-temperature violet electroluminescence at 410 nm with a narrow bandwidth. This conversion to nanoplates significantly enhanced the crystallinity and photophysical properties of the (PEA) 2PbBr 4 samples and the external quantum efficiency of the violet LED. Finally, the solvent vapor annealing method reported herein can be generally applied to other perovskite materials to increase their grain size and, ultimately, improve the performance of optoelectronic devices based on perovskite materials.« less

Non-thermal ion desorption from an acetonitrile (CH3CN) astrophysical ice analogue studied by electron stimulated ion desorption.

PubMed

Ribeiro, F de A; Almeida, G C; Garcia-Basabe, Y; Wolff, W; Boechat-Roberty, H M; Rocco, M L M

2015-11-07

The incidence of high-energy radiation onto icy surfaces constitutes an important route for leading new neutral or ionized molecular species back to the gas phase in interstellar and circumstellar environments, especially where thermal desorption is negligible. In order to simulate such processes, an acetonitrile ice (CH3CN) frozen at 120 K is bombarded by high energy electrons, and the desorbing positive ions are analyzed by time-of-flight mass spectrometry (TOF-MS). Several fragment and cluster ions were identified, including the Hn=1-3(+), CHn=0-3(+)/NHn=0-1(+); C2Hn=0-3(+)/CHn=0-3N(+), C2Hn=0-6N(+) ion series and the ion clusters (CH3CN)n=1-2(+) and (CH3CN)n=1-2H(+). The energy dependence on the positive ion desorption yield indicates that ion desorption is initiated by Coulomb explosion following Auger electronic decay. The results presented here suggest that non-thermal desorption processes, such as desorption induced by electronic transitions (DIET) may be responsible for delivering neutral and ionic fragments from simple nitrile-bearing ices to the gas-phase, contributing to the production of more complex molecules. The derived desorption yields per electron impact may contribute to chemical evolution models in different cold astrophysical objects, especially where the abundance of CH3CN is expected to be high.

Multiple bonds between transition metals and main-group elements. 73. Synthetic routes to rhenium(V) alkyl and rhenium(VII) alkylidyne complexes. X-ray crystal structures of (. eta. sup 5 -C sub 5 Me sub 5 )Re( double bond O)(CH sub 3 )(CH sub 2 C(CH sub 3 ) sub 3 ) and (. eta. sup 5 -C sub 5 Me sub 5 )(Br) sub 3 Re triple bond CC(CH sub 3 ) sub 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herrmann, W.A.; Felixberger, J.K.; Anwander, R.

1990-05-01

Dialkyloxo({eta}{sup 5}pentamethylcyclopentadienyl)rhenium(V) complexes ({eta}{sup 5}-C{sub 5}Me{sub 5})Re({double bond}O)(CH{sub 3})R{prime}(R{prime} = C{sub 2}H{sub 5}, CH{sub 2}Si(CH{sub 3}){sub 3}, CH{sub 2}C(CH{sub 3}){sub 3}), 1c-e, have become accessible through alkylation of ({eta}{sup 5}-C{sub 5}Me{sub 5})Re({double bond}O)(Cl)(CH{sub 3}) (7) with R{prime}MgCl. 1c-e are the first rhenium complexes containing different alkyl ligands. The neopentyl derivative 1e (R{prime} = CH{sub 2}C(CH{sub 3}){sub 3}) crystallizes in the orthorhombic space group Pbca with a = 960.7 (2), b = 2.844.5 (4), c = 1,260.7 (2) pm, and Z = 8. The X-ray crystal structure was refined to R{sub W} = 3.9%. The chiral molecule shows a distorted tetrahedralmore » geometry around the rhenium center. The tribromide 3b has been structurally characterized. Brown crystals of 3b belong to space group P2{sub 1}/c with unit cell dimensions a = 1,311.5 (2), b = 723.0 (1), c = 1,901.6 (2) pm, {beta} = 92.68 (1){degree}, and Z = 4. The structure exhibits a four-legged piano stool geometry with no trans influence of the neopentylidyne ligand to the bromine atom.« less

The H2O-CH3F Complex: a Combined Microwave and Infrared Spectroscopic Study Supported by Structure Calculations

NASA Astrophysics Data System (ADS)

Gnanasekar, Sharon Priya; Goubet, Manuel; Arunan, Elangannan; Georges, Robert; Soulard, Pascale; Asselin, Pierre; Huet, T. R.; Pirali, Olivier

2015-06-01

The H2O-CH3F complex could have two geometries, one with a hydrogen bond and one with the newly proposed carbon bond. While in general carbon bonds are weaker than hydrogen bonds, this complex appears to have comparable energies for the two structures. Infrared (IR) and microwave (MW) spectroscopic measurements using, respectively, the Jet-AILES apparatus and the FTMW spectrometer at the PhLAM laboratory, have been carried out to determine the structure of this complex. The IR spectrum shows the formation of the CH3F- H2O hydrogen bonded complex and small red-shifts in OH frequency most probably due to (CH3F)m-(H2O)n clusters. Noticeably, addition of CH_3F in the mixture promotes the formation of small water clusters. Preliminary MW spectroscopic measurements indicate the formation of the hydrogen bonded complex. So far, we have no experimental evidence for the carbon bonded structure. However, calculations of the Ar-CH3F complex show three energetically equivalent structures: a T-shape, a "fluorine" bond and a carbon bond. The MW spectrum of the (Ar)n-CH3F complexes is currently under analysis. Mani, D; Arunan, E. Phys. Chem. Chem. Phys. 2013, 15, 14377. Cirtog, M; Asselin, P; Soulard, P; Tremblay, B; Madebene, B; Alikhani, M. E; Georges, R; Moudens, A; Goubet, M; Huet, T.R; Pirali, O; Roy, P. J. Phys. Chem. A. 2011, 115, 2523 Kassi, S; Petitprez, D; Wlodarczak, G. J. Mol. Struct. 2000, 517-518, 375

Reduction-Triggered Self-Assembly of Nanoscale Molybdenum Oxide Molecular Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, Panchao; Wu, Bin; Li, Tao

A 2.9 nm molybdenum oxide cluster {Mo 132} (Formula: [Mo VI 72Mo V 60O 372(CH 3COO) 30(H 2O) 72] 42-) can be obtained by reducing ammonium molybdate with hydrazine sulfate in weakly acidic CH 3COOH/CH 3COO- buffers. This reaction has been monitored by time-resolved UV-Vis, 1H-NMR, small angle X-ray/neutron scattering, and X-ray absorption near edge structure spectroscopy. The growth of {Mo 132} cluster shows a typical sigmoid curve, suggesting a multi-step assembly mechanism for this reaction. The reaction starts with a lag phase period when partial MoVI centers of molybdate precursors are reduced to form {MoV2(acetate)} structures under the coordinationmore » effect of the acetate groups. Once the concentration of {Mo V 2(acetate)} reaches a critical value, it triggers the assembly of Mo V and Mo VI species into {Mo 132} clusters. Parameters such as the type and amount of reducing agent, the pH, the type of cation, and the type of organic ligand in the reaction buffer, have been studied for the roles they play in the formation of the target clusters.Understanding the formation mechanism of giant molecular clusters is essential for rational design and synthesis of cluster-based nanomaterials with required morphologies and functionalities. Here, typical synthetic reactions of a 2.9 nm spherical molybdenum oxide cluster, {Mo 132} (formula: [Mo VI 72Mo V 60O 372(CH 3COO) 30(H 2O) 72] 42), with systematically varied reaction parameters have been fully explored to determine the morphologies and concentration of products, reduction of metal centers, and chemical environments of the organic ligands. The growth of these clusters shows a typical sigmoid curve, suggesting a general multistep self-assembly mechanism for the formation of giant molecular clusters. The reaction starts with a lag phase period when partial MoVI centers of molybdate precursors are reduced to form {Mo V 2(acetate)} structures under the coordination effect of the acetate groups. Once the concentration of {MoV2(acetate)} reaches a critical value, it triggers the co-assembly of Mo V and Mo VI species into the giant clusters.« less

Reduction-Triggered Self-Assembly of Nanoscale Molybdenum Oxide Molecular Clusters

DOE PAGES

Yin, Panchao; Wu, Bin; Li, Tao; ...

2016-07-26

A 2.9 nm molybdenum oxide cluster {Mo 132} (Formula: [Mo VI 72Mo V 60O 372(CH 3COO) 30(H 2O) 72] 42-) can be obtained by reducing ammonium molybdate with hydrazine sulfate in weakly acidic CH 3COOH/CH 3COO- buffers. This reaction has been monitored by time-resolved UV-Vis, 1H-NMR, small angle X-ray/neutron scattering, and X-ray absorption near edge structure spectroscopy. The growth of {Mo 132} cluster shows a typical sigmoid curve, suggesting a multi-step assembly mechanism for this reaction. The reaction starts with a lag phase period when partial MoVI centers of molybdate precursors are reduced to form {MoV2(acetate)} structures under the coordinationmore » effect of the acetate groups. Once the concentration of {Mo V 2(acetate)} reaches a critical value, it triggers the assembly of Mo V and Mo VI species into {Mo 132} clusters. Parameters such as the type and amount of reducing agent, the pH, the type of cation, and the type of organic ligand in the reaction buffer, have been studied for the roles they play in the formation of the target clusters.Understanding the formation mechanism of giant molecular clusters is essential for rational design and synthesis of cluster-based nanomaterials with required morphologies and functionalities. Here, typical synthetic reactions of a 2.9 nm spherical molybdenum oxide cluster, {Mo 132} (formula: [Mo VI 72Mo V 60O 372(CH 3COO) 30(H 2O) 72] 42), with systematically varied reaction parameters have been fully explored to determine the morphologies and concentration of products, reduction of metal centers, and chemical environments of the organic ligands. The growth of these clusters shows a typical sigmoid curve, suggesting a general multistep self-assembly mechanism for the formation of giant molecular clusters. The reaction starts with a lag phase period when partial MoVI centers of molybdate precursors are reduced to form {Mo V 2(acetate)} structures under the coordination effect of the acetate groups. Once the concentration of {MoV2(acetate)} reaches a critical value, it triggers the co-assembly of Mo V and Mo VI species into the giant clusters.« less

Microheterogeneity in CH3OH/CD3OH mixture

NASA Astrophysics Data System (ADS)

Wrzeszcz, Władysław; Mazurek, Sylwester; Szostak, Roman; Tomza, Paweł; Czarnecki, Mirosław A.

2018-01-01

Recently, we demonstrated the presence of microheterogeneity in binary mixtures of unlike alcohols. [RSC Adv. 2016, 6, 37195-37202] The aim of this work was examination if this phenomenon occurs also in the mixture of very similar alcohols like CH3OH and CD3OH. Theoretical calculations suggest that the isotopic substitution in methyl group influences properties of the OH group. Hence, one can expect that this effect may lead to partial separation of CH3OH and CD3OH at a molecular level and it contributes to deviation from the ideal mixture. This work evidences that CH3OH/CD3OH mixture also deviates from the ideal one, but the extent of this deviation is much smaller as compared with the mixtures of other alcohols. It is of particular note that this deviation results mainly from the difference between the CH3 and CD3 groups, while the contribution from the OH groups is small. The structure of CH3OH/CD3OH mixture at a molecular level is similar to the structure of binary mixtures of other alcohols. The mixture is composed of the homoclusters of both alcohols and the mixed clusters. The homoclusters existing in the mixture are similar to those present in bulk alcohols. The highest population of the heteroclusters and the largest deviation from the ideal mixture were observed at equimolar mixture. Both the experimental and theoretical results reveal that in CH3OH/CD3OH mixture dominate the cyclic tetramers and larger clusters, while the population of the linear clusters is negligible. Though the extent and strength of hydrogen bonding in both alcohols are the same, the position and intensity of the 2ν(OH) band for CH3OH and CD3OH are different. We propose possible explanation of this observation.

Microheterogeneity in CH3OH/CD3OH mixture.

PubMed

Wrzeszcz, Władysław; Mazurek, Sylwester; Szostak, Roman; Tomza, Paweł; Czarnecki, Mirosław A

2018-01-05

Recently, we demonstrated the presence of microheterogeneity in binary mixtures of unlike alcohols. [RSC Adv. 2016, 6, 37195-37202] The aim of this work was examination if this phenomenon occurs also in the mixture of very similar alcohols like CH 3 OH and CD 3 OH. Theoretical calculations suggest that the isotopic substitution in methyl group influences properties of the OH group. Hence, one can expect that this effect may lead to partial separation of CH 3 OH and CD 3 OH at a molecular level and it contributes to deviation from the ideal mixture. This work evidences that CH 3 OH/CD 3 OH mixture also deviates from the ideal one, but the extent of this deviation is much smaller as compared with the mixtures of other alcohols. It is of particular note that this deviation results mainly from the difference between the CH 3 and CD 3 groups, while the contribution from the OH groups is small. The structure of CH 3 OH/CD 3 OH mixture at a molecular level is similar to the structure of binary mixtures of other alcohols. The mixture is composed of the homoclusters of both alcohols and the mixed clusters. The homoclusters existing in the mixture are similar to those present in bulk alcohols. The highest population of the heteroclusters and the largest deviation from the ideal mixture were observed at equimolar mixture. Both the experimental and theoretical results reveal that in CH 3 OH/CD 3 OH mixture dominate the cyclic tetramers and larger clusters, while the population of the linear clusters is negligible. Though the extent and strength of hydrogen bonding in both alcohols are the same, the position and intensity of the 2ν(OH) band for CH 3 OH and CD 3 OH are different. We propose possible explanation of this observation. Copyright © 2017 Elsevier B.V. All rights reserved.

Relationship between Trophic Status and Methanogenic Pathways in Alaskan Peatlands

NASA Astrophysics Data System (ADS)

Zhang, L.; Liu, X.; Sidelinger, W.; Wang, Y.; Hines, M. E.; Langford, L.; Chanton, J.

2015-12-01

To improve predictions of naturally emitted CH4 from northern wetlands, it is necessary to further examine the methanogenic pathways in these wetlands. Stable isotope C ratios (δ13C) have been used as a robust tool to distinguish different pathways, but different sources of parent compounds (acetate and CO2) with unique δ13C may add complexity to previously established criteria. Large portions of peatlands accommodate a mixture of different sphagna and sedges. Plant species may look very similar and belong to the same genus but are different morphologically and physiologically. To better understand the relationships between surface vegetation patterns and methanogenic pathways, 26 peatland sites were studied in Fairbanks and Anchorage, Alaska in summers of 2014 and 2015. These sites were ordinated using multiple factor analysis into 3 clusters based on pH, temp, CH4 and volatile fatty acids production rates, δ13C values, and surface vegetation species/pattern. In the low-pH trophic cluster (pH~3.5), non-vascular/vascular plant ratios (NV/V) were ~ 0.87 and dominated by diverse Sphagnum species and specific sedges (Eriophorum vaginatum), and fermentation was the dominant end-point in decomposition with no CH4 detected. Although NV/V is about the same in the intermediate cluster (0.74) (pH~4.5), and Sphagnum squarrosum was largely present, both hydrogenotrophic (HM) and acetoclastic methanogenesis (AM) were very active. Syntrophy was present at certain sites, which may provide CO2 with unique δ13C for CH4 production. At the highest pH trophic cluster examined in this study (pH~5), non-vascular plants were almost not existent and Carex aquatilis dominated. CH4 production rates (mainly HM) were slower than those in the intermediate cluster and the apparent fractionation factor a was lower than in the sites with syntrophy, which warrants further investigation of the position and compound specific δ13C analysis of volatile fatty acids.

Combining vibrational biomolecular spectroscopy with chemometric techniques for the study of response and sensitivity of molecular structures/functional groups mainly related to lipid biopolymer to various processing applications.

PubMed

Yu, Gloria Qingyu; Yu, Peiqiang

2015-09-01

The objectives of this project were to (1) combine vibrational spectroscopy with chemometric multivariate techniques to determine the effect of processing applications on molecular structural changes of lipid biopolymer that mainly related to functional groups in green- and yellow-type Crop Development Centre (CDC) pea varieties [CDC strike (green-type) vs. CDC meadow (yellow-type)] that occurred during various processing applications; (2) relatively quantify the effect of processing applications on the antisymmetric CH3 ("CH3as") and CH2 ("CH2as") (ca. 2960 and 2923 cm(-1), respectively), symmetric CH3 ("CH3s") and CH2 ("CH2s") (ca. 2873 and 2954 cm(-1), respectively) functional groups and carbonyl C=O ester (ca. 1745 cm(-1)) spectral intensities as well as their ratios of antisymmetric CH3 to antisymmetric CH2 (ratio of CH3as to CH2as), ratios of symmetric CH3 to symmetric CH2 (ratio of CH3s to CH2s), and ratios of carbonyl C=O ester peak area to total CH peak area (ratio of C=O ester to CH); and (3) illustrate non-invasive techniques to detect the sensitivity of individual molecular functional group to the various processing applications in the recently developed different types of pea varieties. The hypothesis of this research was that processing applications modified the molecular structure profiles in the processed products as opposed to original unprocessed pea seeds. The results showed that the different processing methods had different impacts on lipid molecular functional groups. Different lipid functional groups had different sensitivity to various heat processing applications. These changes were detected by advanced molecular spectroscopy with chemometric techniques which may be highly related to lipid utilization and availability. The multivariate molecular spectral analyses, cluster analysis, and principal component analysis of original spectra (without spectral parameterization) are unable to fully distinguish the structural differences in the antisymmetric and symmetric CH3 and CH2 spectral region (ca. 3001-2799 cm(-1)) and carbonyl C=O ester band region (ca. 1771-1714 cm(-1)). This result indicated that the sensitivity to detect treatment difference by multivariate analysis of cluster analysis (CLA) and principal components analysis (PCA) might be lower compared with univariate molecular spectral analysis. In the future, other more sensitive techniques such as "discriminant analysis" could be considered for discriminating and classifying structural differences. Molecular spectroscopy can be used as non-invasive technique to study processing-induced structural changes that are related to lipid compound in legume seeds.

Competing E2 and SN2 Mechanisms for the F- + CH3CH2I Reaction.

PubMed

Yang, Li; Zhang, Jiaxu; Xie, Jing; Ma, Xinyou; Zhang, Linyao; Zhao, Chenyang; Hase, William L

2017-02-09

Anti-E2, syn-E2, inv-, and ret-S N 2 reaction channels for the gas-phase reaction of F - + CH 3 CH 2 I were characterized with a variety of electronic structure calculations. Geometrical analysis confirmed synchronous E2-type transition states for the elimination of the current reaction, instead of nonconcerted processes through E1cb-like and E1-like mechanisms. Importantly, the controversy concerning the reactant complex for anti-E2 and inv-S N 2 paths has been clarified in the present work. A positive barrier of +19.2 kcal/mol for ret-S N 2 shows the least feasibility to occur at room temperature. Negative activation energies (-16.9, -16.0, and -4.9 kcal/mol, respectively) for inv-S N 2, anti-E2, and syn-E2 indicate that inv-S N 2 and anti-E2 mechanisms significantly prevail over the eclipsed elimination. Varying the leaving group for a series of reactions F - + CH 3 CH 2 Y (Y = F, Cl, Br, and I) leads to monotonically decreasing barriers, which relates to the gradually looser TS structures following the order F > Cl > Br > I. The reactivity of each channel nearly holds unchanged except for the perturbation between anti-E2 and inv-S N 2. RRKM calculation reveals that the reaction of the fluorine ion with ethyl iodide occurs predominately via anti-E2 elimination, and the inv-S N 2 pathway is suppressed, although it is energetically favored. This phenomenon indicates that, in evaluating the competition between E2 and S N 2 processes, the kinetic or dynamical factors may play a significant role. By comparison with benchmark CCSD(T) energies, MP2, CAM-B3LYP, and M06 methods are recommended to perform dynamics simulations of the title reaction.

Anion exchange polymer electrolytes

DOEpatents

Kim, Yu Seung; Kim, Dae Sik; Lee, Kwan-Soo

2013-07-23

Solid anion exchange polymer electrolytes and compositions comprising chemical compounds comprising a polymeric core, a spacer A, and a guanidine base, wherein said chemical compound is uniformly dispersed in a suitable solvent and has the structure: ##STR00001## wherein: i) A is a spacer having the structure O, S, SO.sub.2, --NH--, --N(CH.sub.2).sub.n, wherein n=1-10, --(CH.sub.2).sub.n--CH.sub.3--, wherein n=1-10, SO.sub.2-Ph, CO-Ph, ##STR00002## wherein R.sub.5, R.sub.6, R.sub.7 and R.sub.8 each are independently --H, --NH.sub.2, F, Cl, Br, CN, or a C.sub.1-C.sub.6 alkyl group, or any combination of thereof; ii) R.sub.9, R.sub.10, R.sub.11, R.sub.12, or R.sub.13 each independently are --H, --CH.sub.3, --NH.sub.2, --NO, --CH.sub.nCH.sub.3 where n=1-6, HC.dbd.O--, NH.sub.2C.dbd.O--, --CH.sub.nCOOH where n=1-6, --(CH.sub.2).sub.n--C(NH.sub.2)--COOH where n=1-6, --CH--(COOH)--CH.sub.2--COOH, --CH.sub.2--CH(O--CH.sub.2CH.sub.3).sub.2, --(C.dbd.S)--NH.sub.2, --(C.dbd.NH)--N--(CH.sub.2).sub.nCH.sub.3, where n=0-6, --NH--(C.dbd.S)--SH, --CH.sub.2--(C.dbd.O)--O--C(CH.sub.3).sub.3, --O--(CH.sub.2).sub.n--CH--(NH.sub.2)--COOH, where n=1-6, --(CH.sub.2).sub.n--CH.dbd.CH wherein n=1-6, --(CH.sub.2).sub.n--CH--CN wherein n=1-6, an aromatic group such as a phenyl, benzyl, phenoxy, methylbenzyl, nitrogen-substituted benzyl or phenyl groups, a halide, or halide-substituted methyl groups; and iii) wherein the composition is suitable for use in a membrane electrode assembly.

Determination of Bromine Stable Isotope Ratios from Saline Solutions by "Wet Plasma" MC-ICPMS Including a Comparison between High- and Low-Resolution Modes, and Three Introduction Systems.

PubMed

Louvat, Pascale; Bonifacie, Magali; Giunta, Thomas; Michel, Agnès; Coleman, Max

2016-04-05

We describe a novel method for measuring stable bromine isotope compositions in saline solutions such as seawater, brines, and formation waters. Bromine is extracted from the samples by ion exchange chromatography on anion exchange resin AG 1-X4 with NH4NO3 and measured by MC-ICP-MS in wet plasma conditions. Sample introduction through a small spray chamber provided good sensitivity and stability of the Br signal compared to direct injection (d-DIHEN) and desolvation (APEX). NH4NO3 media allowed fast (<3 min) washing of the system. Despite Ar2H(+) spectral interference on (81)Br(+), for the first time low-resolution mode (with appropriate tuning of Ar2H(+)/(81)Br(+) sensitivity) gave higher precision (81)Br/(79)Br measurements than high-resolution (HR), due to the narrowness of the (81)Br(+) plateau in HR mode and to slight mass drifting with time. Additionally, 1 μg Br is the lower amount needed for a triplicate determination of δ(81)Br by MC-ICP-MS, with reproducibility often < ± 0.1‰ (2 SD). Four HBr solutions were prepared by evaporation/condensation in order to obtain in-house reference solutions with 3‰ variations in δ(81)Br and to assess the reproducibility and accuracy of the method. Long-term (>3 years) reproducibility between ± 0.11 and ± 0.27‰ (2 SD) was obtained for the four HBr solutions, the international standard reference material NIST SRM 977 (δ(81)BrSMOB = -0.65 ± 1.1‰, 1 SD), and seawaters (synthetic and natural). The accuracy of the MC-ICP-MS method was validated by comparing the δ(81)Br obtained for these solutions with dual-inlet IRMS measurements on CH3Br gas. Finally, the method was successfully applied to 22 natural samples.

Density-Difference-Driven Optimized Embedding Potential Method To Study the Spectroscopy of Br₂ in Water Clusters.

PubMed

Roncero, Octavio; Aguado, Alfredo; Batista-Romero, Fidel A; Bernal-Uruchurtu, Margarita I; Hernández-Lamoneda, Ramón

2015-03-10

A variant of the density difference driven optimized embedding potential (DDD-OEP) method, proposed by Roncero et al. (J. Chem. Phys. 2009, 131, 234110), has been applied to the calculation of excited states of Br2 within small water clusters. It is found that the strong interaction of Br2 with the lone electronic pair of the water molecules makes necessary to optimize specific embedding potentials for ground and excited electronic states, separately and using the corresponding densities. Diagnosis and convergence studies are presented with the aim of providing methods to be applied for the study of chromophores in solution. Also, some preliminary results obtained for the study of electronic states of Br2 in clathrate cages are presented.

Recognition of a novel type X═N-Hal···Hal (X = C, S, P; Hal = F, Cl, Br, I) halogen bonding.

PubMed

Gushchin, Pavel V; Kuznetsov, Maxim L; Haukka, Matti; Kukushkin, Vadim Yu

2013-04-04

The chlorination of the eight-membered platinum(II) chelates [PtCl2{NH═C(NR2)N(Ph)C(═NH)N(Ph)C(NR2)═NH}] (R = Me (1); R2 = (CH2)5 (2)) with uncomplexed imino group with Cl2 gives complexes bearing the ═N-Cl moiety [PtCl4{NH═C(NR2)N(Ph)C(═NCl)N(Ph)C(NR2)═NH}] (R = Me (3); R2 = (CH2)5 (4)). X-ray study for 3 revealed a novel type intermolecular halogen bonding ═N-Cl···Cl(-), formed between the Cl atom of the chlorinated imine and the chloride bound to the platinum(IV) center. The processing relevant structural data retrieved from the Cambridge Structural Database (CSDB) shows that this type of halogen bonding is realized in 18 more molecular species having X═N-Hal moieties (X = C, P, S, V, W; Hal = Cl, Br, I), but this weak ═N-Hal···Hal(-) bonding was totally neglected in the previous works. The presence of the halogen bonding in 3 was confirmed by theoretical calculations at the density functional theory (DFT, M06-2X) level, and its nature was analyzed.

Local unitary transformation method toward practical electron correlation calculations with scalar relativistic effect in large-scale molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seino, Junji; Nakai, Hiromi, E-mail: nakai@waseda.jp; Research Institute for Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555

In order to perform practical electron correlation calculations, the local unitary transformation (LUT) scheme at the spin-free infinite-order Douglas–Kroll–Hess (IODKH) level [J. Seino and H. Nakai, J. Chem. Phys.136, 244102 (2012); J. Seino and H. Nakai, J. Chem. Phys.137, 144101 (2012)], which is based on the locality of relativistic effects, has been combined with the linear-scaling divide-and-conquer (DC)-based Hartree–Fock (HF) and electron correlation methods, such as the second-order Møller–Plesset (MP2) and the coupled cluster theories with single and double excitations (CCSD). Numerical applications in hydrogen halide molecules, (HX){sub n} (X = F, Cl, Br, and I), coinage metal chain systems,more » M{sub n} (M = Cu and Ag), and platinum-terminated polyynediyl chain, trans,trans-((p-CH{sub 3}C{sub 6}H{sub 4}){sub 3}P){sub 2}(C{sub 6}H{sub 5})Pt(C≡C){sub 4}Pt(C{sub 6}H{sub 5})((p-CH{sub 3}C{sub 6}H{sub 4}){sub 3}P){sub 2}, clarified that the present methods, namely DC-HF, MP2, and CCSD with the LUT-IODKH Hamiltonian, reproduce the results obtained using conventional methods with small computational costs. The combination of both LUT and DC techniques could be the first approach that achieves overall quasi-linear-scaling with a small prefactor for relativistic electron correlation calculations.« less

Alignment of CH{sub 3}F in para-H{sub 2} crystal studied by IR quantum cascade laser polarization spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawasaki, Hiroyuki; Mizoguchi, Asao; Kanamori, Hideto

In order to investigate the alignment of CH{sub 3}F in para-H{sub 2} crystals, high resolution polarization spectroscopy of the ν{sub 3} vibrational band is studied using a quantum cascade laser at 1040 cm{sup −1}. It is found that the main and satellite series of peaks in the ν{sub 3} vibrational band of CH{sub 3}F have the same polarization dependence. This result supports the previously proposed cluster model with ortho-H{sub 2} in first and second nearest neighbor sites. The observed polarization dependence function is well described by a simple six-axis void model in which CH{sub 3}F is not aligned along themore » c-axis of the crystal but tilted to 64.9(3)° from it.« less

Trinuclear alkyl hydrido rare-earth complexes supported by amidopyridinato ligands: synthesis, structures, C-Si bond activation and catalytic activity in ethylene polymerization.

PubMed

Lyubov, Dmitry M; Cherkasov, Anton V; Fukin, Georgy K; Ketkov, Sergey Yu; Shavyrin, Andrey S; Trifonov, Alexander A

2014-10-14

The reaction of Ap(9Me)Lu(CH2SiMe3)2(thf) (Ap(9Me) = (2,4,6-trimethylphenyl)[6-(2,4,6-triisopropylphenyl)pyridine-2-yl]amido ligand) with two molar equivalents of PhSiH3 affords a trinuclear alkyl-hydrido cluster [(Ap(9Me)Lu)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2]. The analogous reactions with Ap(9Me)Ln(CH2SiMe3)2(thf) (Ln = Y, Yb) are more complex and result in the formation of mixtures of two types of trinuclear alkyl-hydrido complexes [(Ap(9Me)Ln)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2] and [(Ap(9Me)Ln)3(μ(2)-H)3(μ(3)-H)2(CH2SiH2Ph)(thf)2] differing in the alkyl group. The DFT calculations of [(Ap*Y)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2] (Ap* = (2,6-diisopropylphenyl)[6-(2,4,6-triisopropylphenyl)pyridine-2-yl]amido ligand) confirm localization of the HOMO on the Ap*-Y(1A)-CH2SiMe3 fragment, thus explaining its enhanced reactivity. Analysis of the electron density distribution reveals the Y-H and H-H bonding interactions in the (Y)3(μ(2)-H)3(μ(3)-H)2 moiety. The NMR studies of diamagnetic complexes [(Ap(9Me)Lu)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2] and [(Ap*Y)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2] demonstrated that the trinuclear cores are retained in the solution and revealed exchange between μ(3)- and μ(2)-bridging hydrido ligands. Complexes [(Ap*Ln)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2], the cationic yttrium hydrido cluster [(Ap*Y)3(μ(2)-H)3(μ(3)-H)2(thf)3](+)[B(C6F5)4](-) as well as [(Ap(9Me)Ln)3(μ(2)-H)3(μ(3)-H)2(CH2SiMe3)(thf)2] proved to be active in catalysis of ethylene polymerization under mild conditions.

Unimolecular reactivity of organotrifluoroborate anions, RBF3- , and their alkali metal cluster ions, M(RBF3 )2- (M = Na, K; R = CH3 , CH3 CH2 , CH3 (CH2 )3 , CH3 (CH2 )5 , c-C3 H5 , C6 H5 , C6 H5 CH2 , CH2 CHCH2 , CH2 CH, C6 H5 CO).

PubMed

Bathie, Fiona L B; Bowen, Chris J; Hutton, Craig A; O'Hair, Richard A J

2018-07-15

Potassium organotrifluoroborates (RBF 3 K) are important reagents used in organic synthesis. Although mass spectrometry is commonly used to confirm their molecular formulae, the gas-phase fragmentation reactions of organotrifluoroborates and their alkali metal cluster ions have not been previously reported. Negative-ion mode electrospray ionization (ESI) together with collision-induced dissociation (CID) using a triple quadrupole mass spectrometer were used to examine the fragmentation pathways for RBF 3 - (where R = CH 3 , CH 3 CH 2 , CH 3 (CH 2 ) 3 , CH 3 (CH 2 ) 5 , c-C 3 H 5 , C 6 H 5 , C 6 H 5 CH 2 , CH 2 CHCH 2 , CH 2 CH, C 6 H 5 CO) and M(RBF 3 ) 2 - (M = Na, K), while density functional theory (DFT) calculations at the M06/def2-TZVP level were used to examine the structures and energies associated with fragmentation reactions for R = Me and Ph. Upon CID, preferentially elimination of HF occurs for RBF 3 - ions for systems where R = an alkyl anion, whereas R - formation is favoured when R = a stabilized anion. At higher collision energies loss of F - and additional HF losses are sometimes observed. Upon CID of M(RBF 3 ) 2 - , formation of RBF 3 - is the preferred pathway with some fluoride transfer observed only when M = Na. The DFT-calculated relative thermochemistry for competing fragmentation pathways is consistent with the experiments. The main fragmentation pathways of RBF 3 - are HF elimination and/or R - loss. This contrasts with the fragmentation reactions of other organometallate anions, where reductive elimination, beta hydride transfer and bond homolysis are often observed. The presence of fluoride transfer upon CID of Na(RBF 3 ) 2 - but not K(RBF 3 ) 2 - is in agreement with the known fluoride affinities of Na + and K + and can be rationalized by Pearson's HSAB theory. Copyright © 2018 John Wiley & Sons, Ltd.

Production of volatile organic compounds by cyanobacteria Synechococcus sp.

NASA Astrophysics Data System (ADS)

Hiraiwa, M.; Abe, M.; Hashimoto, S.

2014-12-01

Phytoplankton are known to produce volatile organic compounds (VOCs), which contribute to environmental problems such as global warming and decomposition of stratospheric ozone. For example, picophytoplankton, such as Prochlorococcus and Synechococcus, are distributed in freshwater and oceans worldwide, accounting for a large proportion of biomass and primary production in the open ocean. However, to date, little is known about the production of VOCs by picophytoplankton. In this study, VOCs production by cyanobacteria Synechococcus sp. (NIES-981) was investigated. Synechococcus sp. was obtained from the National Institute for Environmental Studies (NIES), Japan, and cultured at 24°C in autoclaved f/2-Si medium under 54 ± 3 µE m-2 s-1 (1 E = 1 mol of photons) with a 12-h light and 12-h dark cycle. VOCs concentrations were determined using a purge-and-trap gas chromatograph-mass spectrometer (Agilent 5973). The concentrations of chlorophyll a (Chl a) were also determined using a fluorometer (Turner TD-700). Bromomethane (CH3Br) and isoprene were produced by Synechococcus sp. Isoprene production was similar to those of other phytoplankton species reported earlier. Isoprene was produced when Chl a was increasing in the early stage of the incubation period (5-15 days of incubation time, exponential phase), but CH3Br was produced when Chl a was reduced in the late stage of the incubation period (30-40 days of incubation time, death phase).

Multifunctional Metal-Organic Frameworks Based on Redox-Active Rhenium Octahedral Clusters.

PubMed

Litvinova, Yulia M; Gayfulin, Yakov M; Kovalenko, Konstantin A; Samsonenko, Denis G; van Leusen, Jan; Korolkov, Ilya V; Fedin, Vladimir P; Mironov, Yuri V

2018-02-19

The redox-active rhenium octahedral cluster unit [Re 6 Se 8 (CN) 6 ] 4- was combined with Gd 3+ ions and dicarboxylate linkers in novel types of metal-organic frameworks (MOFs) that display a set of functional properties. The hydrolytically stable complexes [{Gd(H 2 O) 3 } 2 (L)Re 6 Se 8 (CN) 6 ]·nH 2 O (1, L = furan-2,5-dicarboxylate, fdc; 2, L = thiophene-2,5-dicarboxylate, tdc) exhibit a 3D framework of trigonal symmetry where 1D chains of [{Gd(H 2 O) 3 } 2 (L)] 4+ are connected by [Re 6 Se 8 (CN) 6 ] 4- clusters. Frameworks contain spacious channels filled with H 2 O. Solvent molecules can be easily removed under vacuum to produce permanently porous solids with high volumetric CO 2 uptake and remarkable CO 2 /N 2 selectivity at room temperature. The frameworks demonstrate an ability for reversible redox transformations of the cluster fragment. The orange powders of compounds 1 and 2 react with Br 2 , yielding dark-green powders of [{Gd(H 2 O) 3 } 2 (L)Re 6 Se 8 (CN) 6 ]Br·nH 2 O (3, L = fdc; 4, L = tdc). Compounds 3 and 4 are isostructural with 1 and 2 and also have permanently porous frameworks but display different optical, magnetic, and sorption properties. In particular, oxidation of the cluster fragment "switches off" its luminescence in the red region, and the incorporation of Br - leads to a decrease of the solvent-accessible volume in the channels of 3 and 4. Finally, the green powders of 3 and 4 can be reduced back to the orange powders of 1 and 2 by reaction with hydrazine, thus displaying a rare ability for fully reversible chemical redox transitions. Compounds 1-4 are mentioned as a new class of redox-active cluster-based MOFs with potential usage as multifunctional materials for gas separation and chemical contamination sensors.

Graded bandgap perovskite solar cells.

PubMed

Ergen, Onur; Gilbert, S Matt; Pham, Thang; Turner, Sally J; Tan, Mark Tian Zhi; Worsley, Marcus A; Zettl, Alex

2017-05-01

Organic-inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cell building blocks. Their high light absorption coefficients and long diffusion lengths suggest high power conversion efficiencies, and indeed perovskite-based single bandgap and tandem solar cell designs have yielded impressive performances. One approach to further enhance solar spectrum utilization is the graded bandgap, but this has not been previously achieved for perovskites. In this study, we demonstrate graded bandgap perovskite solar cells with steady-state conversion efficiencies averaging 18.4%, with a best of 21.7%, all without reflective coatings. An analysis of the experimental data yields high fill factors of ∼75% and high short-circuit current densities up to 42.1 mA cm -2 . The cells are based on an architecture of two perovskite layers (CH 3 NH 3 SnI 3 and CH 3 NH 3 PbI 3-x Br x ), incorporating GaN, monolayer hexagonal boron nitride, and graphene aerogel.

Size resolved infrared spectroscopy of Na(CH3OH)n (n = 4-7) clusters in the OH stretching region: unravelling the interaction of methanol clusters with a sodium atom and the emergence of the solvated electron.

PubMed

Forck, Richard M; Pradzynski, Christoph C; Wolff, Sabine; Ončák, Milan; Slavíček, Petr; Zeuch, Thomas

2012-03-07

Size resolved IR action spectra of neutral sodium doped methanol clusters have been measured using IR excitation modulated photoionisation mass spectroscopy. The Na(CH(3)OH)(n) clusters were generated in a supersonic He seeded expansion of methanol by subsequent Na doping in a pick-up cell. A combined analysis of IR action spectra, IP evolutions and harmonic predictions of IR spectra (using density functional theory) of the most stable structures revealed that for n = 4, 5 structures with an exterior Na atom showing high ionisation potentials (IPs) of ~4 eV dominate, while for n = 6, 7 clusters with lower IPs (~3.2 eV) featuring fully solvated Na atoms and solvated electrons emerge and dominate the IR action spectra. For n = 4 simulations of photoionisation spectra using an ab initio MD approach confirm the dominance of exterior structures and explain the previously reported appearance IP of 3.48 eV by small fractions of clusters with partly solvated Na atoms. Only for this cluster size a shift in the isomer composition with cluster temperature has been observed, which may be related to kinetic stabilisation of less Na solvated clusters at low temperatures. Features of slow fragmentation dynamics of cationic Na(+)(CH(3)OH)(6) clusters have been observed for the photoionisation near the adiabatic limit. This finding points to the relevance of previously proposed non-vertical photoionisation dynamics of this system.

Intrinsic and Extrinsic Stability of Formamidinium Lead Bromide Perovskite Solar Cells Yielding High Photovoltage.

PubMed

Arora, Neha; Dar, M Ibrahim; Abdi-Jalebi, Mojtaba; Giordano, Fabrizio; Pellet, Norman; Jacopin, Gwénolé; Friend, Richard H; Zakeeruddin, Shaik Mohammed; Grätzel, Michael

2016-11-09

We report on both the intrinsic and the extrinsic stability of a formamidinium lead bromide [CH(NH 2 ) 2 PbBr 3 = FAPbBr 3 ] perovskite solar cell that yields a high photovoltage. The fabrication of FAPbBr 3 devices, displaying an outstanding photovoltage of 1.53 V and a power conversion efficiency of over 8%, was realized by modifying the mesoporous TiO 2 -FAPbBr 3 interface using lithium treatment. Reasons for improved photovoltaic performance were revealed by a combination of techniques, including photothermal deflection absorption spectroscopy (PDS), transient-photovoltage and charge-extraction analysis, and time-integrated and time-resolved photoluminescence. With lithium-treated TiO 2 films, PDS reveals that the TiO 2 -FAPbBr 3 interface exhibits low energetic disorder, and the emission dynamics showed that electron injection from the conduction band of FAPbBr 3 into that of mesoporous TiO 2 is faster than for the untreated scaffold. Moreover, compared to the device with pristine TiO 2 , the charge carrier recombination rate within a device based on lithium-treated TiO 2 film is 1 order of magnitude lower. Importantly, the operational stability of perovskites solar cells examined at a maximum power point revealed that the FAPbBr 3 material is intrinsically (under nitrogen) as well as extrinsically (in ambient conditions) stable, as the unsealed devices retained over 95% of the initial efficiency under continuous full sun illumination for 150 h in nitrogen and dry air and 80% in 60% relative humidity (T = ∼60 °C). The demonstration of high photovoltage, a record for FAPbBr 3 , together with robust stability renders our work of practical significance.

Relaxed Eddy Accumulation Measurements of Ozone Depleting Compounds from a Mesohaline Saltmarsh Invaded by Lepidium latifolium.

NASA Astrophysics Data System (ADS)

Deventer, M. J.; Jiao, Y.; Rhew, R. C.

2017-12-01

Natural emissions of methyl bromide (CH3Br) and methyl chloride (CH3Cl) from terrestrial ecosystems might explain the missing source of these compounds to the atmosphere. Methyl halides are a major source for stratospheric halogens, which catalyzing ozone depletion. Real-world measurements of their exchange fluxes are limited, typically occurring at coarse time scales using intrusive measurement techniques (e.g., laboratory incubations of soil and vegetation samples). To improve the current understanding of the net budget and to provide a more solid foundation for up-scaling purposes, the surface-atmosphere exchange for both methyl halides has been studied during 2016/2017 in a year-long field campaign at Rush Ranch (38.2004 °N, 122.0265 °W), a 4.6 km2 large (natural) brackish saltmarsh in the San Francisco Bay National Estuarine in Suisun Bay (CA, United States), using the non-intrusive micrometeorological Relaxed Eddy Accumulation (REA) technique. With REA flux measurements, a large area of the salt marsh (on the order of multiple acres) can be studied without disturbance. Concurrently, static flux chamber incubations were conducted over different vegetation species, to identify their relevance in terms of methyl halide emissions. Our results confirm substantial emissions of methyl halides from the studied saltmarsh. A rough global extrapolation of these results yields yearly emissions of 52 Gg yr-1 (CH3Cl) and 8 Gg yr-1 for CH3Br, respectively, which is close to estimates based on chamber based observations from southern California saltmarshes. Chamber incubations at Rush Ranch revealed that the invasive species Lepidium latifolium (perennial pepperweed) emits a significant amount of methyl halides, less than the native alkali heath (Frankenia salina) but much more than the native pickleweed (Salicornia spp.) Due to aggressive invasiveness and it's capability to form dense monospecific patches, L. latifolium is the main driver of halide emissions at Rush Ranch. If L. latifolium. invasion of Salicornia-dominated marsh ecosystems continuous, natural emissions of ozone depleting substances may increase in the future.

Theoretical and experimental studies of the electronic structure of the Mo3(Micro3-0)(Micro3-OR)(Micro-OR)3(OR)6 type of triangulo metal atom cluster compound

NASA Astrophysics Data System (ADS)

Chisholm, M. H.; Cotton, F. A.; Fang, A.; Kober, E. C.

1983-09-01

The electronic structure of a Mo3(Mu sub 3-0) (Mu sub 3-OR) (Mu sub 2-OR)3(OR)6 molecule with R = H, and C3v symmetry, which serves as a model for real molecules in which R = H CH2C(CH)3 or CH(CH3)2 has been calculated by the molecular orbital method of Hall and Fenske. The calculations have been performed not only on the entire molecule, but on the Mo3(12+), Mo3O(OH)(9+) and Mo3O(OH)4(6+) fragments and the metal-metal bonding tracked through these successive stages by the ''clusters in molecules' formalism. In the full molecule, the HOMO is an e orbital that carries most of the e-type M-M bonding, while the a1-type is carried by two MO's, one of which is quite stable. The LUMO is also an e type orbital and the HOMO-LUMO gap is small (ca. 1.5 eV). It is predicted that the Mo3O(OR)10 molecules of this type will have readily accessible redox chemistry in which both oxidation and reduction steps might be slowed or irreversible judging by the character of the HOMO and LUMO of the Mo3O(OR)10 molecule. Experimental observations on Mo3O(ONe)10, Ne = CH2C(CH3)3, are in harmony with this. In addition, the absorption spectrum of Mo3O(ONe)10 has been observed and an assignment based on the calculations in proposed.

Mononuclear ruthenium(III) complexes containing chelating thiosemicarbazones: Synthesis, characterization and catalytic property

NASA Astrophysics Data System (ADS)

Raja, N.; Ramesh, R.

2010-02-01

Mononuclear ruthenium(III) complexes of the type [RuX(EPh 3) 2(L)] (E = P or As; X = Cl or Br; L = dibasic terdentate dehydroacetic acid thiosemicarbazones) have been synthesized from the reaction of thiosemicarbazone ligands with ruthenium(III) precursors, [RuX 3(EPh 3) 3] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr 3(PPh 3) 2(CH 3OH)] in benzene. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV-vis and EPR spectral data. These complexes are paramagnetic and show intense d-d and charge transfer transitions in dichloromethane. The complexes show rhombic EPR spectra at LNT which are typical of low-spin distorted octahedral ruthenium(III) species. All the complexes are redox active and display an irreversible metal centered redox processes. Complex [RuCl(PPh 3) 2(DHA-PTSC)] ( 5) was used as catalyst for transfer hydrogenation of ketones in the presence of isopropanol/KOH and was found to be the active species.

Theoretical studies on Grignard reagent formation: radical mechanism versus non-radical mechanism.

PubMed

Chen, Zhe-Ning; Fu, Gang; Xu, Xin

2012-12-21

Here we present a systematic theoretical investigation on the mechanisms of Grignard reagent formation (GRF) for CH(3)Cl reacting with Mg atom, Mg(2) and a series of Mg clusters (Mg(4)-Mg(20)). Our calculations reveal that the ground state Mg atom is inactive under matrix condition, whereas it is active under metal vapor synthesis (MVS) conditions. On the other hand, the excited state Mg ((3)P) atom, as produced by laser-ablation, can react with CH(3)Cl barrierlessly, and hence is active under matrix condition. We predict that the bimagnesium Grignard reagent, though often proposed, can barely be observed experimentally, due to its high reactivity towards additional CH(3)Cl to produce more stable Grignard reagent dimer, and that the cluster Grignard reagent RMg(4)X possesses a flat Mg(4) unit rather than a tetrahedral geometry. Our calculations further reveal that the radical pathway (T4) is prevalent on Mg, Mg(2) and Mg(n) clusters of small size, while the no-radical pathway (T2), which starts at Mg(4), becomes competitive with T4 as the cluster size increases. A structure-reactivity relationship between barrier heights and ionization potentials of Mg(n) is established. These findings not only resolve controversy in experiment and theory, but also provide insights which can be used in the design of effective synthesis approaches for the preparation of chiral Grignard reagents.

Prediction of enhanced solvent-induced enantioselectivity for a ring opening with a bifurcating reaction path

DOE PAGES

Carpenter, Barry K.; Harvey, Jeremy N.; Glowacki, David R.

2014-12-11

Classical molecular dynamics simulations are reported for the deazetisation and ring opening of meso-2,3-difluoro-2,3-dimethyldiazocyclopropane in three solvents: CHCl 3, CHFClBr and CH 3CH(OH)CF 3 (TFIPA). In this study, the achiral reactant leads to enantiomeric allene products, and the question addressed in the study is whether either of the chiral, enantiomerically pure solvents can induce significant enantiomeric excess in the products. The direct dynamics calculations use an empirical valence bond potential for the solute, with empirical parameters optimised against M06-2X/cc-pVTZ density functional results. The results reveal that the exothermic N 2 loss and ring opening promote transient strong solvent–solute interactions withinmore » the first ~100 fs of the reaction. Because of the bifurcating reaction path, these interactions occur at time when the “decision” about which enantiomer of the product to form has yet to be made (at least for many of the trajectories). Hence, it is possible in principle that the solvent could exert a larger-than-normal influence on the course of the reaction. In fact, the results reveal no such effect for CHFClBr but do predict that TFIPA should induce 15.2 ± 2.1% enantiomeric excess. This is roughly an order of magnitude larger than solvent-induced enantiomeric excesses found experimentally in reactions where the conversion of reactant(s) to enantiomeric products occur over separate transition states.« less

Pb4(OH)4(BrO3)3(NO3): An Example of SHG Crystal in Metal Bromates Containing π-Conjugated Planar Triangle.

PubMed

Kong, Fang; Hu, Chun-Li; Liang, Ming-Li; Mao, Jiang-Gao

2016-01-19

The first example of SHG crystal in the metal bromates containing π-conjugated planar triangle systems, namely, Pb4(OH)4(BrO3)3(NO3), was successfully synthesized via the hydrothermal method. Furthermore, a single crystal of centrosymmetric Pb8O(OH)6(BrO3)6(NO3)2·H2O was also obtained. Both compounds contain similar [Pb4(OH)4] cubane-like tetranuclear clusters, but they display different one-dimensional (1D) chain structures. Pb4(OH)4(BrO3)3(NO3) features a zigzag [Pb4(OH)4(BrO3)3](+) 1D chain, while Pb8O(OH)6(BrO3)6(NO3)2·H2O is composed of two different orthogonal chains: the linear [Pb4(OH)4(BrO3)2](2+) 1D chain along the b-axis and the zigzag [Pb4O2(OH)2(BrO3)4](2-) 1D chain along the a-axis. The NO3 planar triangles of the compounds are all isolated and located in the spaces of the structures. Pb4(OH)4(BrO3)3(NO3) exhibits the first example of SHG crystal in the metal bromates with π-conjugated planar triangle. The second-harmonic generation (SHG) efficiency of Pb4(OH)4(BrO3)3(NO3) is approximately equal to that of KDP and it is phase-matchable. Dipole moment and theory calculations indicate that BrO3, NO3, and PbO4 groups are the origin of its SHG efficiency, although some of the contributions cancel each other out.

Cooperativity of hydrogen-bonded networks in 7-azaindole(CH3OH)n (n=2,3) clusters evidenced by IR-UV ion-dip spectroscopy and natural bond orbital analysis.

PubMed

Sakota, Kenji; Kageura, Yutaka; Sekiya, Hiroshi

2008-08-07

IR-UV ion-dip spectra of the 7-azaindole (7AI)(CH(3)OH)(n) (n=1-3) clusters have been measured in the hydrogen-bonded NH and OH stretching regions to investigate the stable structures of 7AI(CH(3)OH)(n) (n=1-3) in the S(0) state and the cooperativity of the H-bonding interactions in the H-bonded networks. The comparison of the IR-UV ion-dip spectra with IR spectra obtained by quantum chemistry calculations shows that 7AI(CH(3)OH)(n) (n=1-3) have cyclic H-bonded structures, where the NH group and the heteroaromatic N atom of 7AI act as the proton donor and proton acceptor, respectively. The H-bonded OH stretch fundamental of 7AI(CH(3)OH)(2) is remarkably redshifted from the corresponding fundamental of (CH(3)OH)(2) by 286 cm(-1), which is an experimental manifestation of the cooperativity in H-bonding interaction. Similarly, two localized OH fundamentals of 7AI(CH(3)OH)(3) also exhibit large redshifts. The cooperativity of 7AI(CH(3)OH)(n) (n=2,3) is successfully explained by the donor-acceptor electron delocalization interactions between the lone-pair orbital in the proton acceptor and the antibonding orbital in the proton donor in natural bond orbital (NBO) analyses.

Influence of halogenides on luminescence from silver molecular clusters in photothermorefractive glasses

NASA Astrophysics Data System (ADS)

Dubrovin, V. D.; Ignat'ev, A. I.; Nikonorov, N. V.; Sidorov, A. I.

2014-05-01

It is shown experimentally that a rise in the sodium halogenide (NaCl, NaBr) concentration in photothermorefractive glasses increases the intensity of luminescence from silver neutral molecular clusters. Substitution of NaBr for NaCl with their concentration being the same shifts the luminescence band toward longer waves and raises its intensity. These findings can be explained by the formation of molecular clusters of type Ag n -Hal (Hal = Cl, Br) in photothermorefractive glass.

Vapor Phase Synthesis of Organometal Halide Perovskite Nanowires for Tunable Room-Temperature Nanolasers.

PubMed

Xing, Jun; Liu, Xin Feng; Zhang, Qing; Ha, Son Tung; Yuan, Yan Wen; Shen, Chao; Sum, Tze Chien; Xiong, Qihua

2015-07-08

Semiconductor nanowires have received considerable attention in the past decade driven by both unprecedented physics derived from the quantum size effect and strong isotropy and advanced applications as potential building blocks for nanoscale electronics and optoelectronic devices. Recently, organic-inorganic hybrid perovskites have been shown to exhibit high optical absorption coefficient, optimal direct band gap, and long electron/hole diffusion lengths, leading to high-performance photovoltaic devices. Herein, we present the vapor phase synthesis free-standing CH3NH3PbI3, CH3NH3PbBr3, and CH3NH3PbIxCl3(-x) perovskite nanowires with high crystallinity. These rectangular cross-sectional perovskite nanowires have good optical properties and long electron hole diffusion length, which ensure adequate gain and efficient optical feedback. Indeed, we have demonstrated optical-pumped room-temperature CH3NH3PbI3 nanowire lasers with near-infrared wavelength of 777 nm, low threshold of 11 μJ/cm(2), and a quality factor as high as 405. Our research advocates the promise of optoelectronic devices based on organic-inorganic perovskite nanowires.

Molecularly Engineered Organic-Inorganic Hybrid Perovskite with Multiple Quantum Well Structure for Multicolored Light-Emitting Diodes

PubMed Central

Hu, Hongwei; Salim, Teddy; Chen, Bingbing; Lam, Yeng Ming

2016-01-01

Organic-inorganic hybrid perovskites have the potential to be used as a new class of emitters with tunable emission, high color purity and good ease of fabrication. Recent studies have so far been focused on three-dimensional (3D) perovskites, such as CH3NH3PbBr3 and CH3NH3PbI3 for green and infrared emission. Here, we explore a new series of hybrid perovskite emitters with a general formula of (C4H9NH3)2(CH3NH3)n−1PbnI3n+1 (where n = 1, 2, 3), which possesses a multiple quantum well structure. The quantum well thickness of these materials is adjustable through simple molecular engineering which results in a continuously tunable bandgap and emission spectra. Deep saturated red emission was obtained with a peak external quantum efficiency of 2.29% and a maximum luminance of 214 cd/m2. Green and blue LEDs were also demonstrated through halogen substitutions in these hybrid perovskites. We expect these results to open up the way towards high performance perovskite LEDs through molecular-structure engineering of these perovskite emitters. PMID:27633084

Facile Syntheses of Monodisperse Ultra-Small Au Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertino, Massimo F.; Sun, Zhong-Ming; Zhang, Rui

2006-11-02

During our effort to synthesize the tetrahedral Au20 cluster, we found a facile synthetic route to prepare monodisperse suspensions of ultra-small Au clusters AuN (N<12) using diphosphine ligands. In our monophasic and single-pot synthesis, a Au precursor ClAu(I)PPh3 and a bidentate phosphine ligand P(Ph)2(CH2)MP(Ph)2 (Ph = phenyl) are dissolved in an organic solvent. Au(I) is reduced slowly by a borane-tert-butylamine complex to form Au clusters coordinated by the diphosphine ligand. The Au clusters are characterized by both high resolution mass spectrometry and UV-Vis absorption spectroscopy. We found that the mean cluster size obtained depends on the chain length M ofmore » the ligand. In particular, a single monodispersed Au11 cluster is obtained with the P(Ph)2(CH2)3P(Ph)2 ligand, whereas P(Ph)2(CH2)MP(Ph)2 ligands with M = 5 and 6 yield Au10 and Au8 clusters. The simplicity of our synthetic method makes it suitable for large-scale production of nearly monodisperse ultrasmall Au clusters. It is suggested that diphosphines provide a set of flexible ligands to allow size-controlled synthesis of Au nanoparticles.« less

Effect of organic moieties on the scintillation properties of organic-inorganic layered perovskite-type compounds

NASA Astrophysics Data System (ADS)

Kawano, Naoki; Koshimizu, Masanori; Horiai, Akiyoshi; Nishikido, Fumihiko; Haruki, Rie; Kishimoto, Shunji; Shibuya, Kengo; Fujimoto, Yutaka; Yanagida, Takayuki; Asai, Keisuke

2016-11-01

The effects of organic moieties on the scintillation properties of organic-inorganic layered perovskite-type compounds have been investigated. Three kinds of single crystals were fabricated, namely, (C4H9NH3)2PbBr4 (C4), (C6H5CH2NH3)2PbBr4 (Ben), and (C6H5C2H4NH3)2PbBr4 (Phe). Among the single crystals, the light output of Phe was found to have the greatest value when exposed to X-ray radiation (67.4 keV). The light output of Phe was 0.62 times that of YAP:Ce. The relative values of the light outputs among the fabricated single crystals under X-ray radiation correlated well with those of the quantum efficiencies and the luminescence intensity under ultraviolet radiation.

THE NORTH CAROLINA HERALD PILOT STUDY

EPA Science Inventory

The sampling design for the National Children's Study (NCS) calls for a population-based, multi-stage, clustered household sampling approach. The full sample is designed to be representative of both urban and rural births in the United States, 2007-2011. While other sur...

Intense Photosensitized Emission from Stoichiometric Compounds Featuring Mn(2+) in Seven- and Eightfold Coordination Environments.

PubMed

Reid, Howard O. N.; Kahwa, Ishenkumba A.; White, Andrew J. P.; Williams, David J.

1998-07-27

Synthetic, structural and luminescence studies of stoichiometric crown ether compounds of Mn(2+) in well-defined coordination environments were undertaken in an effort to understand the origin of emitting crystal defects found in cubic F23 [(K18C6)(4)MnBr(4)][TlBr(4)](2) crystals (Fender, N. S.; et al. Inorg. Chem. 1997, 36, 5539). The new compound [Mn(12C4)(2)][MnBr(4)](2)[N(CH(3))(4)](2) (3) features Mn(2+) ions in eight- and fourfold coordination environments of [Mn(12C4)(2)](2+) and MnBr(4)(2)(-) respectively, while Mn(2+) in [Mn(15C5)(H(2)O)(2)][TlBr(5)] (4) is in the sevenfold coordination polyhedron of [Mn(15C5)(H(2)O)(2)](2+). Crystal data for 3: monoclinic, P2(1)/c (No. 14); a = 14.131(3) Å, b = 12.158(1) Å, c = 14.239(2) Å, beta = 110.37(1) degrees, Z = 2, R1 = 0.039 and wR2 = 0.083. For 3, long-lived emission (77 K decay rate approximately 3 x 10 s(-)(1)) from [Mn(12C4)(2)](2+) (the first for eight-coordinate Mn(2+) in stoichiometric compounds) is observed (lambda(max) approximately 546 nm) along with that of the sensitizing MnBr(4)(2)(-) (lambda(max) approximately 513 nm), which is partially quenched. Emission from the seven-coordinate [Mn(15C5)(H(2)O)(2)](2+) species of 4 and [Mn(15C5)(H(2)O)(2)][MnBr(4)] (the first for seven-coordinate Mn(2+) in stoichiometric compounds) peaks at lambda(max) approximately 592 nm. Unusually intense absorptions attributable to the seven-coordinate species are observed at 317 ((2)T(2)((2)I) <-- (6)A(1)), 342 ((4)T(1)((4)P) <-- (6)A(1)), 406 ((4)E((4)G) <-- (6)A(1)), and 531 ((4)T(1)((4)G) <-- (6)A(1)) nm.

Charge-transfer photodissociation of adsorbed molecules via electron image states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, E. T.

The 248 and 193 nm photodissociations of submonolayer quantities of CH{sub 3}Br and CH{sub 3}I adsorbed on thin layers of n-hexane indicate that the dissociation is caused by dissociative electron attachment from subvacuum level photoelectrons created in the copper substrate. The characteristics of this photodissociation-translation energy distributions and coverage dependences show that the dissociation is mediated by an image potential state which temporarily traps the photoelectrons near the n-hexane-vacuum interface, and then the charge transfers from this image state to the affinity level of a coadsorbed halomethane which then dissociates.

Photoluminescence characterisations of a dynamic aging process of organic-inorganic CH3NH3PbBr3 perovskite

NASA Astrophysics Data System (ADS)

Sheng, R.; Wen, X.; Huang, S.; Hao, X.; Chen, S.; Jiang, Y.; Deng, X.; Green, M. A.; Ho-Baillie, A. W. Y.

2016-01-01

After unprecedented development of organic-inorganic lead halide perovskite solar cells over the past few years, one of the biggest barriers towards their commercialization is the stability of the perovskite material. It is thus important to understand the interaction between the perovskite material and oxygen and/or humidity and the associated degradation process in order to improve device and encapsulation design for better durability. Here we characterize the dynamic aging process in vapour-assisted deposited (VASP) CH3NH3PbBr3 perovskite thin films using advanced optical techniques, such as time-resolved photoluminescence and fluorescence lifetime imaging microscopy (FLIM). Our investigation reveals that the perovskite grains grow spontaneously and the larger grains are formed at room temperature in the presence of moisture and oxygen. This crystallization process leads to a higher density of defects and a shorter carrier lifetime, specifically in the larger grains. Excitation-intensity-dependent steady-state photoluminescence shows both N2 stored and aged perovskite exhibit a super-linear increase of photoluminescence intensity with increasing excitation intensity; and the larger slope in aged sample suggests a larger density of defects is generated, consistent with time-resolved PL measurements.

Microsolvation of Fluoromethane.

PubMed

Rosenberg, Robert E

2016-09-29

Fluorinated organic compounds are ubiquitous in the pharmaceutical and agricultural industries. To better discern the mode of action of these compounds, it is critical to understand the potential for and strength of hydrogen bonds involving fluorine. It is known that CH3F forms a hydrogen bond with H2O in the gas phase but does not dissolve in bulk water. This paper examines CH3F surrounded by one to six water molecules. For systems of similar topologies, CH3F formed hydrogen bonds of nearly the same strength as water. Although CH3F can bind to a second water cluster with only a modest loss in binding energy, it must bind to these clusters as a double hydrogen bond acceptor. This means that CH3F cannot form a low-energy cyclic 2D hydrogen bonding network with water molecules, which limits its solubility in bulk water. However, CH3F should be able to bind to the periphery of small hydrogen bonding networks. These conclusions were not appreciably altered by SMD calculations. A more complete consideration of solvation, especially entropic effects, was not undertaken. Data for geometries, population changes, and vibrational frequency shifts were also analyzed and compared to binding energies.

A box model study on photochemical interactions between VOCs and reactive halogen species in the marine boundary layer

NASA Astrophysics Data System (ADS)

Toyota, K.; Kanaya, Y.; Takahashi, M.; Akimoto, H.

2003-09-01

A new chemical scheme is developed for the multiphase photochemical box model SEAMAC (size-SEgregated Aerosol model for Marine Air Chemistry) to investigate photochemical interactions between volatile organic compounds (VOCs) and reactive halogen species in the marine boundary layer (MBL). Based primarily on critically evaluated kinetic and photochemical rate parameters as well as a protocol for chemical mechanism development, the new scheme has achieved a near-explicit treatment of oxidative degradation of up to C3-hydrocarbons CH4, C2H6, C3H8, C2H4, C3H6, and C2H2) initiated by reactions with OH radicals, Cl- and Br-atoms, and O3. Rate constants and product yields for reactions involving halogen species are taken from the literature where available, but the majority of them need to be estimated. In particular, addition reactions of halogen atoms with alkenes will result in the formation of halogenated organic intermediates, whose photochemical loss rates are carefully evaluated in the present work. Model calculations with the new chemical scheme reveal that the oceanic emissions of acetaldehyde (CH3CHO) and alkenes (especially C3H6) are important factors for regulating reactive halogen chemistry in the MBL by promoting the conversion of Br atoms into HBr or more stable brominated intermediates in the organic form. The latter include brominated hydroperoxides, bromoacetaldehyde, and bromoacetone, which sequester bromine from reactive inorganic pool. The total mixing ratio of brominated organic species thus produced is likely to reach 10-20% or more of that of inorganic gaseous bromine species over wide regions over the ocean. On the other hand, the reaction between Br atoms and C2H2 is unimportant for determining the degree of bromine activation in the remote MBL. It is suggested that peroxyacetic acid formed via CH3CHO oxidation is one of the important chemical agents for triggering autocatalytic halogen release from sea-salt aerosols. These results imply that reactive halogen chemistry can mediate a link between the oceanic emissions of VOCs and the behaviors of compounds that are sensitive to halogen chemistry such as dimethyl sulfide, NOx, and O3 in the MBL.

Methane Activation Mediated by a Series of Cerium-Vanadium Bimetallic Oxide Cluster Cations: Tuning Reactivity by Doping.

PubMed

Ma, Jia-Bi; Meng, Jing-Heng; He, Sheng-Gui

2016-04-18

The reactions of cerium-vanadium cluster cations Cex Vy Oz (+) with CH4 are investigated by time-of-flight mass spectrometry and density functional theory calculations. (CeO2 )m (V2 O5 )n (+) clusters (m=1,2, n=1-5; m=3, n=1-4) with dimensions up to nanosize can abstract one hydrogen atom from CH4 . The theoretical study indicates that there are two types of active species in (CeO2 )m (V2 O5 )n (+) , V[(Ot )2 ](.) and [(Ob )2 CeOt ](.) (Ot and Ob represent terminal and bridging oxygen atoms, respectively); the former is less reactive than the latter. The experimentally observed size-dependent reactivities can be rationalized by considering the different active species and mechanisms. Interestingly, the reactivity of the (CeO2 )m (V2 O5 )n (+) clusters falls between those of (CeO2 )2-4 (+) and (V2 O5 )1-5 (+) in terms of C-H bond activation, thus the nature of the active species and the cluster reactivity can be effectively tuned by doping. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nucleophilic ring opening of bridging thietanes in open triosmium cluster complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, R.D.; Belinski, J.A.

1992-07-01

The complexes Os{sub 3}(CO){sub 9}({mu}{sub 3}-S)[{mu}-SCH{sub 2}CMe{sub 2}CMe{sub 2}CH{sub 2}] (1) and Os{sub 3}(CO){sub 9}({mu}{sub 3}-S)[{mu}-SCH{sub 2}CH{sub 2}CH{sub 2}] (2) were obtained from the reactions of Os{sub 3}(CO){sub 10}({mu}{sub 3}-S) with 3,3-dimethylthietane (DMT) and thietane, respectively, at -42 {degree}C in the presence of Me{sub 3}NO. Compound 1 was characterized by a single-crystal X-ray diffraction analysis and was found to contain a DMT group bridging two of the nonbonded metal atoms in the open cluster of three metal atoms by using both lone pairs of electrons on the sulfur atom. Compound 1 reacted with bis(triphenylphosphine)nitrogen(1+) chloride ([PPN]Cl) at 25 {degrees}C tomore » yield the salt [PPN][Os{sub 3}-(CO){sub 9}({mu}-SCH{sub 2}CMe{sub 2}CH{sub 2}Cl)({mu}{sub 3}-S)] (3; 76%), in which the chloride ion was added to one of the methylene groups of the DMT ring in a process that caused the ring to open by cleavage of one of the carbon-sulfur bonds. A 4-chloro-3,3-dimethylpropanethiolate ligand bridges the open edge of the anionic triosmium cluster. Compound 3 was converted to the neutral complex Os{sub 3}(CO){sub 9}[{mu}-SCH{sub 2}CMe{sub 2}CMe{sub 2}CH{sub 2}Cl]({mu}{sub 3}-S)({mu}-H) (4) by reaction with HCl at 25 {degrees}C. Compound 4 is structurally similar to 3, except that is contains a hydride ligand bridging one of the two metal-metal bonds. Compounds 1 and 2 react with HCl in CH{sub 2}Cl{sub 2} solvent to yield the neutral compounds 4 and Os{sub 3}(CO){sub 9}[{mu}-SCH{sub 2}CH{sub 2}CH{sub 2}Cl]({mu}{sub 3}-S)({mu}-H) (5) in 89% and 90% yields, respectively, in one step. 11 refs., 3 figs., 10 tabs.« less

Radicals and Aerosols in the Troposphere and Lower Stratosphere

NASA Astrophysics Data System (ADS)

Volkamer, Rainer; Koenig, Theodore; Dix, Barbara

2016-06-01

The remote tropical free troposphere (FT) is one of the most relevant atmospheric environments on Earth. About 75% of the global tropospheric O3 and CH4 loss occurs at tropical latitudes. Tropospheric bromine and iodine catalytically destroy tropospheric O3, oxidize atmospheric mercury, and modify oxidative capacity, and aerosols. Oxygenated VOCs (OVOC) modify HOx (= OH + HO2), NOx (= NO + NO2), tropospheric O3, aerosols, and are a sink for BrOx (= Br + BrO). Until recently, atmospheric models were untested for lack of vertically resolved measurements of BrO and IO radicals in the tropical troposphere. BrO and IO are highly reactive trace gases. Even very low concentrations (parts per trillion; 1 pptv = 10-12 volume mixing ratio) can significantly modify the lifetime of climate active gases, and determine (bromine) the rate limiting step of mercury oxidation in air (that is washed out, and subsequently bio-accumulates in fish). Analytical challenges arise when these radicals modify in sampling lines. Sensitive yet robust, portable, and inherently calibrated measurements directly in the open atmosphere have recently been demonstrated by means of limb-measurements of scattered solar photons by the University of Colorado Airborne Multi-AXis DOAS instrument (CU AMAX-DOAS) from research aircraft. The CU AMAX-DOAS instrument is optimized to (1) locate BrO, IO and glyoxal (a short lived OVOC) in the troposphere, (2) decouple stratospheric absorbers, (3) maximize sensitivity at instrument altitude, (4) facilitate altitude control and (5) enable observations over a wide range of solar zenith angles. Further, (6) the filling-in of Fraunhofer lines (Ring-effect) by Raman Scattering offers interesting opportunities for radiative closure studies to assess the effects of aerosols on Climate.

Treatment costs and indirect costs of cluster headache: A health economics analysis.

PubMed

Gaul, Charly; Finken, Julia; Biermann, Janine; Mostardt, Sarah; Diener, Hans-Christoph; Müller, Oliver; Wasem, Jürgen; Neumann, Anja

2011-12-01

Cluster headache (CH) is the most frequent trigemino-autonomic cephalgia. CH can manifest as episodic (eCH) or chronic cluster headache (cCH) causing significant burden of disease and requiring attack therapy and prophylactic treatment. Treatment costs (direct costs) due to healthcare utilisation, as well as costs caused by disability and reduction in earning capacity (indirect costs), were obtained using a questionnaire in CH patients treated in a tertiary headache centre based at the University Duisburg-Essen over a 6-month period. A total 179 patients (72 cCH, 107 eCH) were included. Mean attack frequency was 3.5 ± 2.5 per day. Mean direct and indirect costs for one person were €5963 in the 6-month period. Direct costs were positively correlated with attack frequency (r = 0.467, p < 0.001). Burden of disease measured with HIT-6 showed a significant correlation with attack frequency (r = 0.467, p < 0.001). Twenty-four (13.4%) of the participants were disabled and not able to work. CH leads to major socioeconomic impact on patients as well as society due to direct healthcare costs and indirect costs caused by loss of working capacity.

Hydrocarbon oxidation by beta-halogenated dioxoruthenium(VI) porphyrin complexes: effect of reduction potential (RuVI/V) and C-H bond-dissociation energy on rate constants.

PubMed

Che, Chi-Ming; Zhang, Jun-Long; Zhang, Rui; Huang, Jie-Sheng; Lai, Tat-Shing; Tsui, Wai-Man; Zhou, Xiang-Ge; Zhou, Zhong-Yuan; Zhu, Nianyong; Chang, Chi Kwong

2005-11-18

beta-Halogenated dioxoruthenium(VI) porphyrin complexes [Ru(VI)(F(28)-tpp)O(2)] [F(28)-tpp=2,3,7,8,12,13, 17,18-octafluoro-5,10,15,20-tetrakis(pentafluorophenyl)porphyrinato(2-)] and [Ru(VI)(beta-Br(8)-tmp)O(2)] [beta-Br(8)-tmp=2,3,7,8,12,13,17,18-octabromo-5,10,15,20- tetrakis(2,4,6-trimethylphenyl)porphyrinato(2-)] were prepared from reactions of [Ru(II)(por)(CO)] [por=porphyrinato(2-)] with m-chloroperoxybenzoic acid in CH(2)Cl(2). Reactions of [Ru(VI)(por)O(2)] with excess PPh(3) in CH(2)Cl(2) gave [Ru(II)(F(20)-tpp)(PPh(3))(2)] [F(20)-tpp=5,10,15,20-tetrakis(pentafluorophenyl)porphyrinato(2-)] and [Ru(II)(F(28)-tpp)(PPh(3))(2)]. The structures of [Ru(II)(por)(CO)(H(2)O)] and [Ru(II)(por)(PPh(3))(2)] (por=F(20)-tpp, F(28)-tpp) were determined by X-ray crystallography, revealing the effect of beta-fluorination of the porphyrin ligand on the coordination of axial ligands to ruthenium atom. The X-ray crystal structure of [Ru(VI)(F(20)-tpp)O(2)] shows a Ru=O bond length of 1.718(3) A. Electrochemical reduction of [Ru(VI)(por)O(2)] (Ru(VI) to Ru(V)) is irreversible or quasi-reversible, with the E(p,c)(Ru(VI/V)) spanning -0.31 to -1.15 V versus Cp(2)Fe(+/0). Kinetic studies were performed for the reactions of various [Ru(VI)(por)O(2)], including [Ru(VI)(F(28)-tpp)O(2)] and [Ru(VI)(beta-Br(8)-tmp)O(2)], with para-substituted styrenes p-X-C(6)H(4)CH=CH(2) (X=H, F, Cl, Me, MeO), cis- and trans-beta-methylstyrene, cyclohexene, norbornene, ethylbenzene, cumene, 9,10-dihydroanthracene, xanthene, and fluorene. The second-order rate constants (k(2)) obtained for the hydrocarbon oxidations by [Ru(VI)(F(28)-tpp)O(2)] are up to 28-fold larger than by [Ru(VI)(F(20)-tpp)O(2)]. Dual-parameter Hammett correlation implies that the styrene oxidation by [Ru(VI)(F(28)-tpp)O(2)] should involve rate-limiting generation of a benzylic radical intermediate, and the spin delocalization effect is more important than the polar effect. The k(2) values for the oxidation of styrene and ethylbenzene by [Ru(VI)(por)O(2)] increase with E(p,c)(Ru(VI/V)), and there is a linear correlation between log k(2) and E(p,c)(Ru(VI/V)). The small slope (approximately 2 V(-1)) of the log k(2) versus E(p,c)(Ru(VI/V)) plot suggests that the extent of charge transfer is small in the rate-determining step of the hydrocarbon oxidations. The rate constants correlate well with the C-H bond dissociation energies, in favor of a hydrogen-atom abstraction mechanism.

Observation of Quantum Confinement in Monodisperse Methylammonium Lead Halide Perovskite Nanocrystals Embedded in Mesoporous Silica.

PubMed

Malgras, Victor; Tominaka, Satoshi; Ryan, James W; Henzie, Joel; Takei, Toshiaki; Ohara, Koji; Yamauchi, Yusuke

2016-10-13

Hybrid organic-inorganic metal halide perovskites have fascinating electronic properties and have already been implemented in various devices. Although the behavior of bulk metal halide perovskites has been widely studied, the properties of perovskite nanocrystals are less well-understood because synthesizing them is still very challenging, in part because of stability. Here we demonstrate a simple and versatile method to grow monodisperse CH 3 NH 3 PbBr x I x-3 perovskite nanocrystals inside mesoporous silica templates. The size of the nanocrystal is governed by the pore size of the templates (3.3, 3.7, 4.2, 6.2, and 7.1 nm). In-depth structural analysis shows that the nanocrystals maintain the perovskite crystal structure, but it is slightly distorted. Quantum confinement was observed by tuning the size of the particles via the template. This approach provides an additional route to tune the optical bandgap of the nanocrystal. The level of quantum confinement was modeled taking into account the dimensions of the rod-shaped nanocrystals and their close packing inside the channels of the template. Photoluminescence measurements on CH 3 NH 3 PbBr clearly show a shift from green to blue as the pore size is decreased. Synthesizing perovskite nanostructures in templates improves their stability and enables tunable electronic properties via quantum confinement. These structures may be useful as reference materials for comparison with other perovskites, or as functional materials in all solid-state light-emitting diodes.

Pressure-induced phase transformation, reversible amorphization, and anomalous visible light response in organolead bromide perovskite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yonggang; Lu, Xujie; Yang, Wenge

Hydrostatic pressure, as an alternative of chemical pressure to tune the crystal structure and physical properties, is a significant technique for novel function material design and fundamental research. In this article, we report the phase stability and visible light response of the organolead bromide perovskite, CH 3NH 3PbBr 3 (MAPbBr 3), under hydrostatic pressure up to 34 GPa at room temperature: Two phase transformations below 2 GPa (from Pm3¯m to Im3¯, then to Pnma) and a reversible amorphization starting from about 2 GPa were observed, which could be attributed to the tilting of PbBr 6 octahedra and destroying of long-rangemore » ordering of MA cations, respectively. The visible light response of MAPbBr 3 to pressure was studied by in situ photoluminescence, electric resistance, photocurrent measurements and first-principle simulations. The anomalous band gap evolution during compression with red-shift followed by blue-shift is explained by the competition between compression effect and pressure-induced amorphization. Along with the amorphization process accomplished around 25 GPa, the resistance increased by 5 orders of magnitude while the system still maintains its semiconductor characteristics and considerable response to the visible light irradiation. Lastly, our results not only show that hydrostatic pressure may provide an applicable tool for the organohalide perovskites based photovoltaic device functioning as switcher or controller, but also shed light on the exploration of more amorphous organometal composites as potential light absorber.« less

Pressure-Induced Phase Transformation, Reversible Amorphization, and Anomalous Visible Light Response in Organolead Bromide Perovskite.

PubMed

Wang, Yonggang; Lü, Xujie; Yang, Wenge; Wen, Ting; Yang, Liuxiang; Ren, Xiangting; Wang, Lin; Lin, Zheshuai; Zhao, Yusheng

2015-09-02

Hydrostatic pressure, as an alternative of chemical pressure to tune the crystal structure and physical properties, is a significant technique for novel function material design and fundamental research. In this article, we report the phase stability and visible light response of the organolead bromide perovskite, CH3NH3PbBr3 (MAPbBr3), under hydrostatic pressure up to 34 GPa at room temperature. Two phase transformations below 2 GPa (from Pm3̅m to Im3̅, then to Pnma) and a reversible amorphization starting from about 2 GPa were observed, which could be attributed to the tilting of PbBr6 octahedra and destroying of long-range ordering of MA cations, respectively. The visible light response of MAPbBr3 to pressure was studied by in situ photoluminescence, electric resistance, photocurrent measurements and first-principle simulations. The anomalous band gap evolution during compression with red-shift followed by blue-shift is explained by the competition between compression effect and pressure-induced amorphization. Along with the amorphization process accomplished around 25 GPa, the resistance increased by 5 orders of magnitude while the system still maintains its semiconductor characteristics and considerable response to the visible light irradiation. Our results not only show that hydrostatic pressure may provide an applicable tool for the organohalide perovskites based photovoltaic device functioning as switcher or controller, but also shed light on the exploration of more amorphous organometal composites as potential light absorber.

Pressure-induced phase transformation, reversible amorphization, and anomalous visible light response in organolead bromide perovskite

DOE PAGES

Wang, Yonggang; Lu, Xujie; Yang, Wenge; ...

2015-08-18

Hydrostatic pressure, as an alternative of chemical pressure to tune the crystal structure and physical properties, is a significant technique for novel function material design and fundamental research. In this article, we report the phase stability and visible light response of the organolead bromide perovskite, CH 3NH 3PbBr 3 (MAPbBr 3), under hydrostatic pressure up to 34 GPa at room temperature: Two phase transformations below 2 GPa (from Pm3¯m to Im3¯, then to Pnma) and a reversible amorphization starting from about 2 GPa were observed, which could be attributed to the tilting of PbBr 6 octahedra and destroying of long-rangemore » ordering of MA cations, respectively. The visible light response of MAPbBr 3 to pressure was studied by in situ photoluminescence, electric resistance, photocurrent measurements and first-principle simulations. The anomalous band gap evolution during compression with red-shift followed by blue-shift is explained by the competition between compression effect and pressure-induced amorphization. Along with the amorphization process accomplished around 25 GPa, the resistance increased by 5 orders of magnitude while the system still maintains its semiconductor characteristics and considerable response to the visible light irradiation. Lastly, our results not only show that hydrostatic pressure may provide an applicable tool for the organohalide perovskites based photovoltaic device functioning as switcher or controller, but also shed light on the exploration of more amorphous organometal composites as potential light absorber.« less

Syntheses, structures and redox properties of some complexes containing the Os(dppe)Cp* fragment, including [{Os(dppe)Cp*}2(mu-C triple bondCC triple bond C)].

PubMed

Bruce, Michael I; Costuas, Karine; Davin, Thomas; Halet, Jean-François; Kramarczuk, Kathy A; Low, Paul J; Nicholson, Brian K; Perkins, Gary J; Roberts, Rachel L; Skelton, Brian W; Smith, Mark E; White, Allan H

2007-12-14

The sequential conversion of [OsBr(cod)Cp*] (9) to [OsBr(dppe)Cp*] (10), [Os([=C=CH2)(dppe)Cp*]PF6 ([11]PF6), [Os(C triple bond CH)(dppe)Cp*] (12), [{Os(dppe)Cp*}2{mu-(=C=CH-CH=C=)}][PF6]2 ([13](PF6)2) and finally [{Os(dppe)Cp*}(2)(mu-C triple bond CC triple bond C)] (14) has been used to make the third member of the triad [{M(dppe)Cp*}2(mu-C triple bond CC triple bond C)] (M = Fe, Ru, Os). The molecular structures of []PF6, 12 and 14, together with those of the related osmium complexes [Os(NCMe)(dppe)Cp*]PF6 ([15]PF6) and [Os(C triple bond CPh)(dppe)Cp*] (16), have been determined by single-crystal X-ray diffraction studies. Comparison of the redox properties of 14 with those of its iron and ruthenium congeners shows that the first oxidation potential E1 varies as: Fe approximately Os < Ru. Whereas the Fe complex has been shown to undergo three sequential 1-electron oxidation processes within conventional electrochemical solvent windows, the Ru and Os compounds undergo no fewer than four sequential oxidation events giving rise to a five-membered series of redox related complexes [{M(dppe)Cp*}2(mu-C4)]n+ (n = 0, 1, 2, 3 and 4), the osmium derivatives being obtained at considerably lower potentials than the ruthenium analogues. These results are complimented by DFT and DT DFT calculations.

Solid-state NMR/NQR and first-principles study of two niobium halide cluster compounds.

PubMed

Perić, Berislav; Gautier, Régis; Pickard, Chris J; Bosiočić, Marko; Grbić, Mihael S; Požek, Miroslav

2014-01-01

Two hexanuclear niobium halide cluster compounds with a [Nb6X12](2+) (X=Cl, Br) diamagnetic cluster core, have been studied by a combination of experimental solid-state NMR/NQR techniques and PAW/GIPAW calculations. For niobium sites the NMR parameters were determined by using variable Bo field static broadband NMR measurements and additional NQR measurements. It was found that they possess large positive chemical shifts, contrary to majority of niobium compounds studied so far by solid-state NMR, but in accordance with chemical shifts of (95)Mo nuclei in structurally related compounds containing [Mo6Br8](4+) cluster cores. Experimentally determined δiso((93)Nb) values are in the range from 2,400 to 3,000 ppm. A detailed analysis of geometrical relations between computed electric field gradient (EFG) and chemical shift (CS) tensors with respect to structural features of cluster units was carried out. These tensors on niobium sites are almost axially symmetric with parallel orientation of the largest EFG and the smallest CS principal axes (Vzz and δ33) coinciding with the molecular four-fold axis of the [Nb6X12](2+) unit. Bridging halogen sites are characterized by large asymmetry of EFG and CS tensors, the largest EFG principal axis (Vzz) is perpendicular to the X-Nb bonds, while intermediate EFG principal axis (Vyy) and the largest CS principal axis (δ11) are oriented in the radial direction with respect to the center of the cluster unit. For more symmetrical bromide compound the PAW predictions for EFG parameters are in better correspondence with the NMR/NQR measurements than in the less symmetrical chlorine compound. Theoretically predicted NMR parameters of bridging halogen sites were checked by (79/81)Br NQR and (35)Cl solid-state NMR measurements. Copyright © 2014 Elsevier Inc. All rights reserved.

Thermodynamic origin of instability in hybrid halide perovskites

PubMed Central

Tenuta, E.; Zheng, C.; Rubel, O.

2016-01-01

Degradation of hybrid halide perovskites under the influence of environmental factors impairs future prospects of using these materials as absorbers in solar cells. First principle calculations can be used as a guideline in search of new materials, provided we can rely on their predictive capabilities. We show that the instability of perovskites can be captured using ab initio total energy calculations for reactants and products augmented with additional thermodynamic data to account for finite temperature effects. Calculations suggest that the instability of CH3NH3PbI3 in moist environment is linked to the aqueous solubility of the CH3NH3I salt, thus making other perovskite materials with soluble decomposition products prone to degradation. Properties of NH3OHPbI3, NH3NH2PbI3, PH4PbI3, SbH4PbI3, CsPbBr3, and a new hypothetical SF3PbI3 perovskite are studied in the search for alternative solar cell absorber materials with enhanced chemical stability. PMID:27883032

Characterization of divalent and trivalent species generated in the chemical and electrochemical oxidation of a dimeric pincer complex of nickel.

PubMed

Spasyuk, Denis M; Gorelsky, Serge I; van der Est, Art; Zargarian, Davit

2011-03-21

The electrolytic and chemical oxidation of the dimeric pincer complex [κ(P),κ(C),κ(N),μ(N)-(2,6-(i-Pr(2)POC(6)H(3)CH(2)NBn)Ni](2) (1; Bn = CH(2)Ph) has been investigated by various analytic techniques. Cyclic voltammetry measurements have shown that 1 undergoes a quasi-reversible, one electron, Ni-based redox process (ΔE(0)(1/2) = -0.07 V vs Cp(2)Fe/[Cp(2)Fe](+)), and spectroelectrochemical measurements conducted on the product of the electrolytic oxidation, [1](+•), have shown multiple low-energy electronic transitions in the range of 10,000-15,000 cm(-1). Computational studies using Density Functional Theory (B3LYP) have corroborated the experimentally obtained structure of 1, provided the electronic structure description, and helped interpret the experimentally obtained absorption spectra for 1 and [1](+·). These calculations indicate that the radical cation [1](+·) is a dimeric, mixed-valent species (class III) wherein most of the spin density is delocalized over the two nickel centers (Ni(+2.5)(2)N(2)), but some spin density is also present over the two nitrogen atoms (Ni(2+)(2)N(2)·). Examination of alternative structures for open shell species generated from 1 has shown that the spin density distribution is highly sensitive toward changes in the ligand environment of the Ni ions. NMR, UV-vis, electron paramagnetic resonance (EPR), and single crystal X-ray diffraction analyses have shown that chemical oxidation of 1 with N-Bromosuccinimide (NBS) follows a complex process that gives multiple products, including the monomeric trivalent species κ(P),κ(C),κ(N)-{2,6-(i-Pr(2)PO)(C(6)H(3))(CH═NBn)}NiBr(2) (2). These studies also indicate that oxidation of 1 with 1 equiv of NBS gives an unstable, paramagnetic intermediate that decomposes to a number of divalent species, including succinimide and the monomeric divalent complexes κ(P),κ(C),κ(N)-{2,6-(i-Pr(2)PO)(C(6)H(3))(CH═NBn)}NiBr (3) and κ(P),κ(C),κ(N)-{2,6-(i-Pr(2)PO)(C(6)H(3))(CH(2)N(H)Bn)}NiBr(2) (4); a second equivalent of NBS then oxidizes 3 and 4 to 2 and other unidentified products. The divalent complex 3 was synthesized independently and shown to react with NBS or bromine to form its trivalent homologue 2. The new complexes 2 and 3 have been characterized fully.

Surfactant 1-Hexadecyl-3-methylimidazolium Chloride Can Convert One-Dimensional Viologen Bromoplumbate into Zero-Dimensional.

PubMed

Liu, Guangfeng; Liu, Jie; Nie, Lina; Ban, Rui; Armatas, Gerasimos S; Tao, Xutang; Zhang, Qichun

2017-05-15

A zero-dimensional N,N'-dibutyl-4,4'-dipyridinium bromoplumbate, [BV] 6 [Pb 9 Br 30 ], with unusual discrete [Pb 9 Br 30 ] 12- anionic clusters was prepared via a facile surfactant-mediated solvothermal process. This bromoplumbate exhibits a narrower optical band gap relative to the congeneric one-dimensional viologen bromoplumbates.

Synthesis of multifunctional clustered nano-Fe3O4 chitosan nanocomposite for biomedical applications

NASA Astrophysics Data System (ADS)

Villamin, Maria Emma; Kitamoto, Yoshitaka

2018-01-01

Clustered iron oxide nanoparticles covered with chitosan hydrogel (FeOx/Ch NC) have multiple potential functionalities in biomedical applications such as pH-controlled drug release, magnetic hyperthermia, and magnetic non-contact pH sensing. In the present study, the synthesis and characterization of FeOx/Ch NC are demonstrated. Moreover, the heating capability of the nanocomposites is also explored for the potential magnetic hyperthermia application by measuring the temperature curves under different AC frequencies (900 kHz to 2500 kHz). Monodispersed FeOx NPs are first synthesized via thermal decomposition. Then, dried FeOx NPs are combined with chitosan using a homogenizer to form the clustered composites. Synthesized composites are then characterized using XRD, TEM, and FTIR. Temperature curves are measured via a custom-built hyperthermia setup. Results show successful synthesis of clustered Fe3O4-chitosan nanocomposite with XRD peaks corresponding to magnetite (Fe3O4) structure. FTIR results show the presence of functional groups of chitosan (N-H, C-O) and FeOx NPs (Fe-O). These confirms the successful fabrication of FeOx/Ch NC. The temperature curves show maximum temperature changes of about 2°C to 22°C depending on the AC frequency. The heating rate is found to increase with the frequency, which suggests that the resonance frequency is higher than 2500 kHz.

Experimental studies on ion mobility in xenon-trimethylamine mixtures

NASA Astrophysics Data System (ADS)

Trindade, A. M. F.; Encarnação, P. M. C. C.; Escada, J.; Cortez, A. F. V.; Neves, P. N. B.; Conde, C. A. N.; Borges, F. I. G. M.; Santos, F. P.

2017-07-01

In this paper we present experimental results for ion reduced mobilities (K0) in gaseous trimethylamine, TMA—(CH3)3N, and xenon-TMA mixtures for reduced electric fields E/N between 7.5 and 60 Td and in the pressure range from 0.5 to 10 Torr, at room temperature. Both in the mixtures and in pure TMA only one peak was observed in the time of arrival spectra, which is believed to be due to two TMA ions with similar mass, (CH3)3N+ (59 u) and (CH3)2CH2N+ (58 u), whose mobility is indistinguishable in our experimental system. The possibility of ion cluster formation is also discussed. In pure TMA, for the E/N range investigated, an average value of 0.56 cm2V-1s-1 was obtained for the reduced mobility of TMA ions. For the studied mixtures, it was observed that even a very small amount of gaseous TMA (~0.2%) in xenon leads to the production of the above referred TMA ions or clusters. The reduced mobility value of this ion or ions in Xe-TMA mixtures is higher than the value in pure TMA: around 0.8 cm2V-1s-1 for TMA concentrations from 0.2% to about 10%, decreasing for higher TMA percentages, eventually converging to the reduced mobility value in pure TMA.

Surface enhanced Raman spectral studies of 2-bromo-1,4-naphthoquinone.

PubMed

Geetha, K; Umadevi, M; Sathe, G V; Vanelle, P; Terme, T; Khoumeri, O

2015-03-05

Silver nanoparticles have been synthesized by a simple and inexpensive solution combustion method with urea as fuel. The structural and morphology of the silver nanoparticles were investigated through X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersion Spectra (EDS) techniques. Structural and morphological results confirmed the nanocrystalline nature of the silver nanoparticles. Density Functional Theory (DFT) calculations were also performed to study the ground and excited state behavior of 2-bromo-1,4-naphthoquinone (2-BrNQ) and 2-BrNQ on silver nanoparticles. Surface-Enhanced Raman Scattering (SERS) spectra of 2-BrNQ adsorbed on silver nanoparticles were investigated. The CO, CH in-plane bending and CBr stretching modes were enhanced in SERS spectrum with respect to normal Raman spectrum. The spectral analysis reveals that the 2-BrNQ adsorbed 'stand-on' orientation on the silver surface. Density Functional Theory (DFT) calculations are also performed to study the vibrational features of 2-BrNQ molecule and 2-BrNQ molecule on silver surface. Copyright © 2014 Elsevier B.V. All rights reserved.

Ge(14)[Ge(SiMe(3))(3)](5)Li(3)(THF)(6): the largest metalloid cluster compound of germanium: on the way to fullerene-like compounds?

PubMed

Schenk, Christian; Schnepf, Andreas

2008-10-14

The reaction of GeBr with LiGe(SiMe(3))(3) yields the largest metalloid cluster compound of germanium Ge(14)[Ge(SiMe(3))(3)](5)Li(3)(THF)(6), in which 14 germanium atoms are arranged as a hollow sphere in the cluster core, showing that in the case of germanium also fullerene-like compounds might be present in the borderland between the molecular and solid states.

A stream-based methane monitoring approach for evaluating groundwater impacts associated with unconventional gas development.

PubMed

Heilweil, Victor M; Stolp, Bert J; Kimball, Briant A; Susong, David D; Marston, Thomas M; Gardner, Philip M

2013-01-01

Gaining streams can provide an integrated signal of relatively large groundwater capture areas. In contrast to the point-specific nature of monitoring wells, gaining streams coalesce multiple flow paths. Impacts on groundwater quality from unconventional gas development may be evaluated at the watershed scale by the sampling of dissolved methane (CH4 ) along such streams. This paper describes a method for using stream CH4 concentrations, along with measurements of groundwater inflow and gas transfer velocity interpreted by 1-D stream transport modeling, to determine groundwater methane fluxes. While dissolved ionic tracers remain in the stream for long distances, the persistence of methane is not well documented. To test this method and evaluate CH4 persistence in a stream, a combined bromide (Br) and CH4 tracer injection was conducted on Nine-Mile Creek, a gaining stream in a gas development area in central Utah. A 35% gain in streamflow was determined from dilution of the Br tracer. The injected CH4 resulted in a fivefold increase in stream CH4 immediately below the injection site. CH4 and δ(13) CCH4 sampling showed it was not immediately lost to the atmosphere, but remained in the stream for more than 2000 m. A 1-D stream transport model simulating the decline in CH4 yielded an apparent gas transfer velocity of 4.5 m/d, describing the rate of loss to the atmosphere (possibly including some microbial consumption). The transport model was then calibrated to background stream CH4 in Nine-Mile Creek (prior to CH4 injection) in order to evaluate groundwater CH4 contributions. The total estimated CH4 load discharging to the stream along the study reach was 190 g/d, although using geochemical fingerprinting to determine its source was beyond the scope of the current study. This demonstrates the utility of stream-gas sampling as a reconnaissance tool for evaluating both natural and anthropogenic CH4 leakage from gas reservoirs into groundwater and surface water. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

Short-length and high-density TiO2 nanorod arrays for the efficient charge separation interface in perovskite solar cells

NASA Astrophysics Data System (ADS)

Xiao, Guannan; Shi, Chengwu; Zhang, Zhengguo; Li, Nannan; Li, Long

2017-05-01

The TiO2 nanorod arrays with the length of 70 nm, the diameter of 20 nm, and the areal density of 1000 μm-2 were firstly prepared by the hydrothermal method using the aqueous grown solution of 38 mM titanium isopropoxide and 6 M hydrochloric acid at 170 °C for 60 min. Over-500 nm-thickness CH3NH3PbI3-xBrx absorber layers were successfully obtained by sequential deposition routes using 1.7 M PbI2·DMSO complex precursor solution and 0.465 M isopropanol solution of the methylammonium halide mixture with the molar ratio of CH3NH3I/CH3NH3Br=85/15. The perovskite solar cells based on the TiO2 nanorod array and 560 nm-thickness CH3NH3PbI3-xBrx absorber layer exhibited the best photoelectric conversion efficiency (PCE) of 15.93%, while the corresponding planar perovskite solar cells without the TiO2 nanorod array and with 530 nm-thickness CH3NH3PbI3-xBrx absorber layer gave the best PCE of 12.82% at the relative humidity of 50-54%.

EFFECT OF DOSE ON THE EXCRETION AND METABOLISM OF MONOMETHYLARSONIC ACID IN THE MOUSE

EPA Science Inventory

EFFECT OF DOSE ON THE EXCRETION AND METABOLISM OF MONOMETHYLARSONIC ACID IN THE MOUSE
M F Hughes1, V Devesa2, B C Edwards1, C T Mitchell1, E M Kenyon1, and D J Thomas1. 1US EPA, ORD, NHEERL, ETD, Research Triangle Park, NC; 2UNC-CH, CEMALB, Chapel Hill, NC

Monomethylar...

Ordered hexagonal mesoporous aluminosilicates with low Si/Al ratio: synthesis, characterization, and catalytic application.

PubMed

Liu, Aifeng; Che, Hongwei; Liu, Chuanzhi; Fu, Quanrong; Jiang, Ruijiao; Wang, Cheng; Wang, Liang

2014-06-01

Ordered hexagonal mesoporous aluminosilicates with lower Si/Al ratio below 5 have been successfully synthesized via the co-assembly of preformed aluminosilicate precursors with Gemini surfactant [C12H25N+(CH3)2(CH2)6N+(CH3)2C12H25] x 2Br(-) as the template. Powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, N2 adsorption-desorption isotherm measurements, Fourier transform infrared spectroscopy, 27Al nuclear magnetic resonance, thermogravimetric analysis, and temperature-programmed desorption of cyclohexylamine are employed to characterize the resulting samples. The phenol alkylation reaction is carried out to evaluate their catalytic performances. These studies indicate that the sample with a low Si/Al ratio of 3 still retains a highly ordered hexagonal mesoporous structure. And it also possesses the highest acidity of 0.96 mmol among the samples with lower Si/Al ratios below 5 due to its higher specific surface area together with more content of tetrahedrally coordinated Al in the framework. The catalytic tests confirm that the acidity of the samples plays a key role in determining their catalytic performances.

Ab initio evaluation of the thermodynamic and electrochemical properties of alkyl halides and radicals and their mechanistic implications for atom transfer radical polymerization.

PubMed

Lin, Ching Yeh; Coote, Michelle L; Gennaro, Armando; Matyjaszewski, Krzysztof

2008-09-24

High-level ab initio molecular orbital calculations are used to study the thermodynamics and electrochemistry relevant to the mechanism of atom transfer radical polymerization (ATRP). Homolytic bond dissociation energies (BDEs) and standard reduction potentials (SRPs) are reported for a series of alkyl halides (R-X; R = CH 2CN, CH(CH 3)CN, C(CH 3) 2CN, CH 2COOC 2H 5, CH(CH 3)COOCH 3, C(CH 3) 2COOCH 3, C(CH 3) 2COOC 2H 5, CH 2Ph, CH(CH 3)Ph, CH(CH 3)Cl, CH(CH 3)OCOCH 3, CH(Ph)COOCH 3, SO 2Ph, Ph; X = Cl, Br, I) both in the gas phase and in two common organic solvents, acetonitrile and dimethylformamide. The SRPs of the corresponding alkyl radicals, R (*), are also examined. The computational results are in a very good agreement with the experimental data. For all alkyl halides examined, it is found that, in the solution phase, one-electron reduction results in the fragmentation of the R-X bond to the corresponding alkyl radical and halide anion; hence it may be concluded that a hypothetical outer-sphere electron transfer (OSET) in ATRP should occur via concerted dissociative electron transfer rather than a two-step process with radical anion intermediates. Both the homolytic and heterolytic reactions are favored by electron-withdrawing substituents and/or those that stabilize the product alkyl radical, which explains why monomers such as acrylonitrile and styrene require less active ATRP catalysts than vinyl chloride and vinyl acetate. The rate constant of the hypothetical OSET reaction between bromoacetonitrile and Cu (I)/TPMA complex was estimated using Marcus theory for the electron-transfer processes. The estimated rate constant k OSET = approximately 10 (-11) M (-1) s (-1) is significantly smaller than the experimentally measured activation rate constant ( k ISET = approximately 82 M (-1) s (-1) at 25 degrees C in acetonitrile) for the concerted atom transfer mechanism (inner-sphere electron transfer, ISET), implying that the ISET mechanism is preferred. For monomers bearing electron-withdrawing groups, the one-electron reduction of the propagating alkyl radical to the carbanion is thermodynamically and kinetically favored over the one-electron reduction of the corresponding alkyl halide unless the monomer bears strong radical-stabilizing groups. Thus, for monomers such as acrylates, catalysts favoring ISET over OSET are required in order to avoid chain-breaking side reactions.

Synthesis, Crystal and Electronic Structures, and Optical Properties of (CH 3NH 3) 2CdX 4 (X = Cl, Br, I)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roccanova, Rachel; Ming, Wenmei; Whiteside, Vincent R.

Here, we report the synthesis, crystal and electronic structures, as well as optical properties of the hybrid organic–inorganic compounds MA 2CdX 4 (MA = CH 3NH 3; X = Cl, Br, I). MA 2CdI 4 is a new compound, whereas, for MA 2CdCl 4 and MA 2CdBr 4, structural investigations have already been conducted but electronic structures and optical properties are reported here for the first time. Single crystals were grown through slow evaporation of MA 2CdX 4 solutions with optimized conditions yielding mm-sized colorless (X = Cl, Br) and pale yellow (X = I) crystals. Single crystal and variablemore » temperature powder X-ray diffraction measurements suggest that MA 2CdCl 4 forms a 2D layered perovskite structure and has two structural transitions at 283 and 173 K. In contrast, MA 2CdBr 4 and MA 2CdI 4 adopt 0D K 2SO 4-derived crystal structures based on isolated CdX 4 tetrahedra and show no phase transitions down to 20 K. The contrasting crystal structures and chemical compositions in the MA 2CdX 4 family impact their air stabilities, investigated for the first time in this work; MA 2CdCl 4 is air-stable, whereas MA 2CdBr 4 and MA 2CdI 4 partially decompose when left in air. Optical absorption measurements suggest that MA 2CdX 4 have large optical band gaps above 3.9 eV. Room temperature photoluminescence spectra of MA 2CdX 4 yield broad peaks in the 375–955 nm range with full width at half-maximum values up to 208 nm. These PL peaks are tentatively assigned to self-trapped excitons in MA 2CdX 4 following the crystal and electronic structure considerations. The bands around the Fermi level have small dispersions, which is indicative of high charge localization with significant exciton binding energies in MA 2CdX 4. On the basis of our combined experimental and computational results, MA 2CdX 4 and related compounds may be of interest for white-light-emitting phosphors and scintillator applications.« less

Synthesis, Crystal and Electronic Structures, and Optical Properties of (CH 3NH 3) 2CdX 4 (X = Cl, Br, I)

DOE PAGES

Roccanova, Rachel; Ming, Wenmei; Whiteside, Vincent R.; ...

2017-11-02

Here, we report the synthesis, crystal and electronic structures, as well as optical properties of the hybrid organic–inorganic compounds MA 2CdX 4 (MA = CH 3NH 3; X = Cl, Br, I). MA 2CdI 4 is a new compound, whereas, for MA 2CdCl 4 and MA 2CdBr 4, structural investigations have already been conducted but electronic structures and optical properties are reported here for the first time. Single crystals were grown through slow evaporation of MA 2CdX 4 solutions with optimized conditions yielding mm-sized colorless (X = Cl, Br) and pale yellow (X = I) crystals. Single crystal and variablemore » temperature powder X-ray diffraction measurements suggest that MA 2CdCl 4 forms a 2D layered perovskite structure and has two structural transitions at 283 and 173 K. In contrast, MA 2CdBr 4 and MA 2CdI 4 adopt 0D K 2SO 4-derived crystal structures based on isolated CdX 4 tetrahedra and show no phase transitions down to 20 K. The contrasting crystal structures and chemical compositions in the MA 2CdX 4 family impact their air stabilities, investigated for the first time in this work; MA 2CdCl 4 is air-stable, whereas MA 2CdBr 4 and MA 2CdI 4 partially decompose when left in air. Optical absorption measurements suggest that MA 2CdX 4 have large optical band gaps above 3.9 eV. Room temperature photoluminescence spectra of MA 2CdX 4 yield broad peaks in the 375–955 nm range with full width at half-maximum values up to 208 nm. These PL peaks are tentatively assigned to self-trapped excitons in MA 2CdX 4 following the crystal and electronic structure considerations. The bands around the Fermi level have small dispersions, which is indicative of high charge localization with significant exciton binding energies in MA 2CdX 4. On the basis of our combined experimental and computational results, MA 2CdX 4 and related compounds may be of interest for white-light-emitting phosphors and scintillator applications.« less

INCREASED IL-8 AND IL-6 EXPRESSION IN HUMAN AIRWAY EPITHELIAL CELLS EXPOSED TO CARBON ULTRAFINE PARTICLES

EPA Science Inventory

INCREASED IL-6 AND IL-8 EXPRESSION IN HUMAN AIRWAY EPITHELIAL CELLS EXPOSED TO CARBON ULTRAFINE PARTICLES.
R Silbajoris1, A G Lenz2, I Jaspers3, J M Samet1. 1NHEERL, USEPA, RTP, NC, USA; 2GSF-Institute for Inhalation Biology, Neuherberg, Germany; 3 CEMLB, UNC-CH, Chapel Hill, ...

Cleavage of hydrogen by activation at a single non-metal centre - towards new hydrogen storage materials.

PubMed

Grabowski, Sławomir J

2015-05-28

Molecular surfaces of non-metal species are often characterized by both positive and negative regions of electrostatic potential (EP) at a non-metal centre. This centre may activate molecular hydrogen which further leads to the addition reaction. The positive EP regions at the non-metal centres correspond to σ-holes; the latter sites are enhanced by electronegative substituents. This is why the following simple moieties; PFH2, SFH, AsFH2, SeFH, BrF3, PF(CH3)2 and AsF(CH3)2, were chosen here to analyze the H2 activation and its subsequent splitting at the P, As, S, Se and Br centres. Also the reverse H-H bond reforming process is analyzed. MP2/aug-cc-pVTZ calculations were performed for systems corresponding to different stages of these processes. The sulphur centre in the SFH moiety is analyzed in detail since the potential barrier height for the addition reaction for this species is the lowest of the moieties analyzed here. The results of calculations show that the SFH + H2 → SFH3 reaction in the gas phase is endothermic but it is exothermic in polar solvents.

Cluster headache in Greece: an observational clinical and demographic study of 302 patients.

PubMed

Vikelis, Michail; Rapoport, Alan M

2016-12-01

Cluster headache (CH) is considered the most excruciating primary headache syndrome; although much less prevalent than migraine, it is not rare as it affects more than 1/1000 people. While its clinical presentation is considered stereotypic, atypical features are often encountered. Internationally, cluster headache is often misdiagnosed, undertreated and mistreated. We prospectively studied 302 CH patients, all examined by the same headache specialist. The aim of our study was to describe the demographic and clinical characteristics of CH patients in Greece and draw attention to under-management, under-treatment and mis-treatment often encountered in clinical practice; our purpose is to improve recognition and successful treatment of cluster patients by Greek neurologists and other physicians. In the present cohort, clinical characteristics of CH are similar to those described in other populations. Beyond the standard clinical characteristics, features like side shifts (12.6 %), location of maximal pain intensity outside the first trigeminal branch division (10.2 %), lack of autonomic features (7 %), presence of associated features of migraine and aggravation by physical activity (10 %) were encountered. Four out of five patients had consulted a physician prior to diagnosis. The median number of physicians seen prior to diagnosis was 3 and the median time to diagnosis was 5 years, though it improved for patients with recent onset. Chronic cluster headache, side shifts, pain location in the face or the back of the head and aggravation by physical activity were found, among others, to be statistically significantly related to delayed diagnosis or more physicians seen prior to diagnosis. Even properly diagnosed patients were often undertreated or mistreated. Cluster headache, in a large cohort of Greek patients, has the same phenotypic characteristics as described internationally. Uncommon clinical features do exist and physicians should be aware of those, since they may eventuate in diagnostic problems. Most CH patients in Greece remain misdiagnosed or undiagnosed for rather lengthy periods of time, but time to diagnosis has improved recently. Even after diagnosis, treatment received was suboptimal.

Theoretical investigation of the He4Br2 conformers.

PubMed

Valdés, Álvaro; Prosmiti, Rita; Villarreal, Pablo; Delgado-Barrio, Gerardo

2012-07-05

Full dimensional quantum dynamics calculations of the three lowest isomers of the He(4)Br(2) van der Waals molecule in its ground electronic state are reported. The calculations are performed using the multiconfiguration time-dependent Hartree (MCTDH) method and a realistic potential form that includes the sum of three body ab initio coupled-cluster single double triple [CCSD(T)] He-Br(2) interactions plus the He-He and Br-Br interactions. This potential exhibits several multiple minima, with the three lowest ones lying very close in energy, just within 2 cm(-1). Such small differences are also found in the calculated binding energies of the three most stable conformers, indicating the floppiness of the system and, thus, the need of accurate potential forms and quantum full dynamics methods to treat this kind of complexes. The 12 dimensional results reported in this work present benchmark data and, thus, can serve to evaluate approximate methods aiming to describe higher order rare gas-dihalogen (N > 4) complexes. A comparison with previous studies using different potential forms and approaches to the energetics for the He(4)Br(2) cluster is also presented.

Membrane Microdomain Structures of Liposomes and Their Contribution to the Cellular Uptake Efficiency into HeLa Cells.

PubMed

Onuki, Yoshinori; Obata, Yasuko; Kawano, Kumi; Sano, Hiromu; Matsumoto, Reina; Hayashi, Yoshihiro; Takayama, Kozo

2016-02-01

The purpose of this study is to obtain a comprehensive relationship between membrane microdomain structures of liposomes and their cellular uptake efficiency. Model liposomes consisting of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/cholesterol (Ch) were prepared with various lipid compositions. To detect distinct membrane microdomains in the liposomes, fluorescence-quenching assays were performed at temperatures ranging from 25 to 60 °C using 1,6-diphenyl-1,3,5-hexatriene-labeled liposomes and (2,2,6,6-tetramethylpiperidin-1-yl)oxyl. From the data analysis using the response surface method, we gained a better understanding of the conditions for forming distinct domains (Lo, Ld, and gel phase membranes) as a function of lipid composition. We further performed self-organizing maps (SOM) clustering to simplify the complicated behavior of the domain formation to obtain its essence. As a result, DPPC/DOPC/Ch liposomes in any lipid composition were integrated into five distinct clusters in terms of similarity of the domain structure. In addition, the findings from synchrotron small-angle X-ray scattering analysis offered further insight into the domain structures. As a last phase of this study, an in vitro cellular uptake study using HeLa cells was conducted using SOM clusters' liposomes with/without PEGylation. As a consequence of this study, higher cellular uptake was observed from liposomes having Ch-rich ordered domains.

Acetylcholinesterase and acetylcholine receptor. Midterm report, 1 April 1992-30 September 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cohen, S.G.

1993-12-20

1-Bromo-2-((14)Cpinacolone((14)C)BrPin), active-site directed, completely inactivates AcChEs from T. nobiliana and and E. electricus. It alkylates Cys-231 in the former, rapidly, and, in the latter, less rapidly, His-440 and possibly Trp-435 and Asn-533. Three peptides of T. Nobiliana, starting at Ala-222, Thr-193, and Val-518, and one from E. electricus, starting at Ala-427, are identical with, and two from E. electricus, starting at Leu-531 and Thr-547, are 80% homologous with those of T. californica. Inactivation by BrPin excludes ((3)Hdfp), while preinactivation by DFP does not exclude ((14)C)BrPin. Phenacyl bromide (PhABr) inactivates both enzymes more rapidly than BrPin, that from T. nobiliana bymore » reaction at Cys-231, and with E. electricus at His-550. The slower inactivations of E. electricus lead to greater introductions of (14)C. T. nobiliana is protected against BrPin and PhABr by 5-trimethylammonio-2-pentanone (TAP) and 3-trimethylammonio acetophenone (TMAAP). E. electricus is protected against BrPin and PhABr by TAP and phenyltrimethylammonium ion (PTA), respectively. Methyl benzenesulfonate and methyl-p-nitrobenzenesulfonate are being considered as labeling agents.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buragohain, Amlan; Couck, Sarah; Van Der Voort, Pascal

Four existing and three new functionalized chromium terephthalates having MIL-101 topology and denoted as Cr-MIL-101-X (existing ones with X=–F, 1-F; –Cl, 2-Cl; –Br, 3-Br; –CH{sub 3}, 4-CH{sub 3}; new ones with X=–C{sub 6}H{sub 4}, 5-C{sub 6}H{sub 4}; –F{sub 2}, 6-F{sub 2}, –(CH{sub 3}){sub 2}, 7-(CH{sub 3}){sub 2}) were synthesized under hydrothermal conditions. All the materials except 5-C{sub 6}H{sub 4} could be prepared by a general synthetic route, in which the mixtures of CrO{sub 3}, H{sub 2}BDC-X (BDC=1,4-benzenedicarboxylate) linkers, conc. HCl and water with a molar ratio of 1:1:3.9:222.2 were reacted at 180 °C for 144 h. Compared to the 144more » h of synthesis time, three of the compounds, namely 1-Cl, 2-Br and 5-C{sub 6}H{sub 4}, could be prepared in much shorter reaction times (12–18 h at 180–210 °C). The materials possess high thermal stability up to 270–300 °C in an air atmosphere. The activated compounds exhibit significant porosity (S{sub BET} range: 1273–2135 m{sup 2} g{sup −1}). At 0 °C and 1 bar, the CO{sub 2} adsorption capacities of the compounds fall in the 1.7–2.9 mmol g{sup −1} range. Compounds 1-F and 6-F{sub 2} showed enhanced CO{sub 2} uptake values compared to parent Cr-MIL-101. The benzene adsorption capacities of the compounds lie in the range of 66.2–139.5 molecules per unit cell at 50 °C and p/p{sub 0}=0.35. The increased benzene uptake value of 1-F compared to un-functionalized Cr-MIL-101 and 4-CH{sub 3} suggests that the fluorination has induced more hydrophobicity in Cr-MIL-101 as compared to the methylation. - Graphical abstract: Benzene adsorption by seven functionalized Cr-MIL-101-X metal-organic framework (MOF) materials Display Omitted - Highlights: • Seven functionalized Cr-MIL-101-X materials were synthesized solvothermally. • All Cr-MIL-101-X materials exhibited high thermal stability up to 270–300 °C in air. • All Cr-MIL-101-X compounds displayed considerable porosity towards N{sub 2}, CO{sub 2} and benzene. • Mono- and di-fluorinated Cr-MIL-101 materials showed enhanced CO{sub 2} adsorption capacities. • Cr-MIL-101-F adsorbed more benzene than non- and methyl-functionalized Cr-MIL-101.« less

Third-order Douglas-Kroll Relativistic Coupled-Cluster Theory through Connected Single, Double, Triple, and Quadruple Substitutions: Applications to Diatomic and Triatomic Hydrides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirata, So; Yanai, Takeshi; De Jong, Wibe A.

Coupled-cluster methods including through and up to the connected single, double, triple, and quadruple substitutions (CCSD, CCSDT, and CCSDTQ) have been automatically derived and implemented for sequential and parallel executions for use in conjunction with a one-component third-order Douglas-Kroll (DK3) approximation for relativistic corrections. A combination of the converging electron-correlation methods, the accurate relativistic reference wave functions, and the use of systematic basis sets tailored to the relativistic approximation has been shown to predict the experimental singlet-triplet separations within 0.02 eV (0.5 kcal/mol) for five triatomic hydrides (CH2, NH2+, SiH2, PH2+, and AsH2+), the experimental bond lengths within 0.002 angstroms,more » rotational constants within 0.02 cm-1, vibration-rotation constants within 0.01 cm-1, centrifugal distortion constants within 2 %, harmonic vibration frequencies within 9 cm-1 (0.4 %), anharmonic vibrational constants within 2 cm-1, and dissociation energies within 0.03 eV (0.8 kcal/mol) for twenty diatomic hydrides (BH, CH, NH, OH, FH, AlH, SiH, PH, SH, ClH, GaH, GeH, AsH, SeH, BrH, InH, SnH, SbH, TeH, and IH) containing main-group elements across the second through fifth periods of the periodic table. In these calculations, spin-orbit effects on dissociation energies, which were assumed to be additive, were estimated from the measured spin-orbit coupling constants of atoms and diatomic molecules, and an electronic energy in the complete-basis-set, complete-electron-correlation limit has been extrapolated by the formula which was in turn based on the exponential-Gaussian extrapolation formula of the basis set dependence.« less

On the physical nature of halogen bonds: a QTAIM study.

PubMed

Syzgantseva, Olga A; Tognetti, Vincent; Joubert, Laurent

2013-09-12

In this article, we report a detailed study on halogen bonds in complexes of CHCBr, CHCCl, CH2CHBr, FBr, FCl, and ClBr with a set of Lewis bases (NH3, OH2, SH2, OCH2, OH(-), Br(-)). To obtain insight into the physical nature of these bonds, we extensively used Bader's Quantum Theory of Atoms-in-Molecules (QTAIM). With this aim, in addition to the examination of the bond critical points properties, we apply Pendás' Interacting Quantum Atoms (IQA) scheme, which enables rigorous and physical study of each interaction at work in the formation of the halogen-bonded complexes. In particular, the influence of primary and secondary interactions on the stability of the complexes is analyzed, and the roles of electrostatics and exchange are notably discussed and compared. Finally, relationships between QTAIM descriptors and binding energies are inspected.

An unusual alkylidyne homologation.

PubMed

Han, Yong-Shen; Hill, Anthony F; Kong, Richard Y

2018-02-27

The reaction of [W([triple bond, length as m-dash]CH)Br(CO) 2 (dcpe)] (dcpe = 1,2-bis(dicyclohexylphosphino)ethane) with t BuLi and SiCl 4 affords the trichlorosilyl ligated neopentylidyne complex [W([triple bond, length as m-dash]C t Bu)(SiCl 3 )(CO) 2 (dcpe)]. This slowly reacts with H 2 O to afford [W([triple bond, length as m-dash]CCH 2 t Bu)Cl 3 (dcpe)] and ultimately H 2 C[double bond, length as m-dash]CH t Bu via an unprecedented alkylidyne homologation in which coordinated CO is the source of the additional carbon atom with potential relevance to the Fischer-Tropsch process.

Rhenium in homogeneous catalysis: [ReBrH(NO)(labile ligand)(large-bite-angle diphosphine)] complexes as highly active catalysts in olefin hydrogenations.

PubMed

Dudle, Balz; Rajesh, Kunjanpillai; Blacque, Olivier; Berke, Heinz

2011-06-01

The reaction of [ReBr(2)(MeCN)(NO)(P∩P)] (P∩P = 1,1'-bisdiphenylphosphinoferrocene (dppfc) (1a), 1,1'-bisdiisopropylphosphinopherrocene (diprpfc) (1b), 2,2'-bis(diphenylphosphino)diphenyl ether (dpephos) (1c), 10,11-dihydro-4,5-bis(diphenylphosphino)dibenzo[b,f]oxepine (homoxantphos) (1d) and 4,6-bis(diphenylphosphino)-10,10-dimethylphenoxasilin (Sixantphos) (1e)) led in the presence of HSiEt(3) and ethylene to formation of the ethylene hydride complexes [ReBrH(η(2)-C(2)H(4))(NO)(P∩P)] (3a,b,d), the MeCN ethyl complex [ReBr(Et)(MeCN)(NO)(dpephos)] (5c) and two ortho-metalated stereoisomers of [ReBr(η(2)-C(2)H(4))(NO)(η(3)-o-C(6)H(4)-Sixantphos)] 8e(up) and 8e(down). The complexes 3a,b,d, and 5c and the isomers of 8e showed high catalytic activity (TOFs ranging from 22 to 4870 h(-1), TONs up to 24000) in the hydrogenation of monosubstituted olefins. For 8e(down) and 8e(up) a remarkable functional group tolerance and catalyst stability were noticed. Kinetic experiments revealed k(obs) to be first order in c(cat) and c(H(2)) and zeroth order in c(olefin). Mechanistic studies and DFT calculations suggest the catalysis to proceed along an Osborn-type catalytic cycle with olefin before H(2) addition. The unsaturated key intermediates [ReBrH(NO)(P∩P)] (2a-e) could be intercepted with MeCN as [ReBrH(MeCN)(NO)(P∩P)] (10a-d) complexes or isolated as dimeric μ(2)-(H)(2) complexes [{ReBr(μ(2)-H)(NO)(P∩P)}(2)] (9b and 9e). Variation of the bidentate ligand demonstrated a crucial influence of the (large)-bite-angle on the catalytic performance and reactivity of 3a,b,d, 5c, and 8e. © 2011 American Chemical Society

Synthesis and Ligand-Exchange Reactions of a Tri-Tungsten Cluster with Applications in Biomedical Imaging

ERIC Educational Resources Information Center

Noey, Elizabeth; Curtis, Jeff C.; Tam, Sylvia; Pham, David M.; Jones, Ella F.

2011-01-01

In this experiment students are exposed to concepts in inorganic synthesis and various spectroscopies as applied to a tri-tungsten cluster with applications in biomedical imaging. The tungsten-acetate cluster, Na[W[superscript 3](mu-O)[subscript 2](CH[superscript 3]COO)[superscript 9

Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells

PubMed Central

Rong, Yaoguang; Hou, Xiaomeng; Hu, Yue; Mei, Anyi; Liu, Linfeng; Wang, Ping; Han, Hongwei

2017-01-01

Organometal lead halide perovskites have been widely used as the light harvester for high-performance solar cells. However, typical perovskites of methylammonium lead halides (CH3NH3PbX3, X=Cl, Br, I) are usually sensitive to moisture in ambient air, and thus require an inert atmosphere to process. Here we demonstrate a moisture-induced transformation of perovskite crystals in a triple-layer scaffold of TiO2/ZrO2/Carbon to fabricate printable mesoscopic solar cells. An additive of ammonium chloride (NH4Cl) is employed to assist the crystallization of perovskite, wherein the formation and transition of intermediate CH3NH3X·NH4PbX3(H2O)2 (X=I or Cl) enables high-quality perovskite CH3NH3PbI3 crystals with preferential growth orientation. Correspondingly, the intrinsic perovskite devices based on CH3NH3PbI3 achieve an efficiency of 15.6% and a lifetime of over 130 days in ambient condition with 30% relative humidity. This ambient-processed printable perovskite solar cell provides a promising prospect for mass production, and will promote the development of perovskite-based photovoltaics. PMID:28240286

CO2 adsorption-assisted CH4 desorption on carbon models of coal surface: A DFT study

NASA Astrophysics Data System (ADS)

Xu, He; Chu, Wei; Huang, Xia; Sun, Wenjing; Jiang, Chengfa; Liu, Zhongqing

2016-07-01

Injection of CO2 into coal is known to improve the yields of coal-bed methane gas. However, the technology of CO2 injection-enhanced coal-bed methane (CO2-ECBM) recovery is still in its infancy with an unclear mechanism. Density functional theory (DFT) calculations were performed to elucidate the mechanism of CO2 adsorption-assisted CH4 desorption (AAD). To simulate coal surfaces, different six-ring aromatic clusters (2 × 2, 3 × 3, 4 × 4, 5 × 5, 6 × 6, and 7 × 7) were used as simplified graphene (Gr) carbon models. The adsorption and desorption of CH4 and/or CO2 on these carbon models were assessed. The results showed that a six-ring aromatic cluster model (4 × 4) can simulate the coal surface with limited approximation. The adsorption of CO2 onto these carbon models was more stable than that in the case of CH4. Further, the adsorption energies of single CH4 and CO2 in the more stable site were -15.58 and -18.16 kJ/mol, respectively. When two molecules (CO2 and CH4) interact with the surface, CO2 compels CH4 to adsorb onto the less stable site, with a resulting significant decrease in the adsorption energy of CH4 onto the surface of the carbon model with pre-adsorbed CO2. The Mulliken charges and electrostatic potentials of CH4 and CO2 adsorbed onto the surface of the carbon model were compared to determine their respective adsorption activities and changes. At the molecular level, our results showed that the adsorption of the injected CO2 promoted the desorption of CH4, the underlying mechanism of CO2-ECBM.

Cluster-continuum quasichemical theory calculation of the lithium ion solvation in water, acetonitrile and dimethyl sulfoxide: an absolute single-ion solvation free energy scale.

PubMed

Carvalho, Nathalia F; Pliego, Josefredo R

2015-10-28

Absolute single-ion solvation free energy is a very useful property for understanding solution phase chemistry. The real solvation free energy of an ion depends on its interaction with the solvent molecules and on the net potential inside the solute cavity. The tetraphenyl arsonium-tetraphenyl borate (TATB) assumption as well as the cluster-continuum quasichemical theory (CC-QCT) approach for Li(+) solvation allows access to a solvation scale excluding the net potential. We have determined this free energy scale investigating the solvation of the lithium ion in water (H2O), acetonitrile (CH3CN) and dimethyl sulfoxide (DMSO) solvents via the CC-QCT approach. Our calculations at the MP2 and MP4 levels with basis sets up to the QZVPP+diff quality, and including solvation of the clusters and solvent molecules by the dielectric continuum SMD method, predict the solvation free energy of Li(+) as -116.1, -120.6 and -123.6 kcal mol(-1) in H2O, CH3CN and DMSO solvents, respectively (1 mol L(-1) standard state). These values are compatible with the solvation free energy of the proton of -253.4, -253.2 and -261.1 kcal mol(-1) in H2O, CH3CN and DMSO solvents, respectively. Deviations from the experimental TATB scale are only 1.3 kcal mol(-1) in H2O and 1.8 kcal mol(-1) in DMSO solvents. However, in the case of CH3CN, the deviation reaches a value of 9.2 kcal mol(-1). The present study suggests that the experimental TATB scale is inconsistent for CH3CN. A total of 125 values of the solvation free energy of ions in these three solvents were obtained. These new data should be useful for the development of theoretical solvation models.

Existence of both blue-shifting hydrogen bond and Lewis acid-base interaction in the complexes of carbonyls and thiocarbonyls with carbon dioxide.

PubMed

Nguyen, Tien Trung; Nguyen, Phi Hung; Tran, Thanh Hue; Minh, Tho Nguyen

2011-08-21

In this study, 16 gas phase complexes of the pairs of XCHZ and CO(2) (X = F, Cl, Br; Z = O, S) have been identified. Interaction energies calculated at the CCSD(T)/aug-cc-pVTZ//MP2/aug-cc-pVTZ level including both BSSE and ZPE corrections range from -5.6 to -10.5 kJ mol(-1) for XCHOCO(2) and from -5.7 to -9.1 kJ mol(-1) for XCHS···CO(2). Substitution of one H atom by one halogen in formaldehyde and thioformaldehyde reduces the interaction energy of XCHZ···CO(2), while a CH(3) substitution increases the interaction energy of both CH(3)CHO···CO(2) and CH(3)CHS···CO(2). NBO and AIM analyses also point out that the strength of Lewis acid-base interactions decreases going from >C1=S3···C6 to >C1=O3C6 and to >C1-X4···C6. This result suggests the higher capacity of solubility of thiocarbonyl compounds in scCO(2), providing an enormous potential application for designing CO(2)-philic materials based on the >C=S functional group in competition with >C=O. The Lewis acid-base interaction of the types >C=S···C, >C-Cl···C and >C-Br···C is demonstrated for the first time. The contribution of the hydrogen bonding interaction to the total interaction energy is larger for XCHS···CO(2) than for XCHO···CO(2). Upon complexation, a contraction of the C1-H2 bond length and a blue shift of its stretching frequency have been observed, as compared to the isolated monomer, indicating the existence of a blue-shifting hydrogen bond in all complexes examined. Calculated results also lend further support for the viewpoint that when acting as proton donor, a C-H bond having a weaker polarization will induce a stronger distance contraction and frequency blue shift upon complexation, and vice versa.