Discovering beaten paths in collaborative ontology-engineering projects using Markov chains.

PubMed

Walk, Simon; Singer, Philipp; Strohmaier, Markus; Tudorache, Tania; Musen, Mark A; Noy, Natalya F

2014-10-01

Biomedical taxonomies, thesauri and ontologies in the form of the International Classification of Diseases as a taxonomy or the National Cancer Institute Thesaurus as an OWL-based ontology, play a critical role in acquiring, representing and processing information about human health. With increasing adoption and relevance, biomedical ontologies have also significantly increased in size. For example, the 11th revision of the International Classification of Diseases, which is currently under active development by the World Health Organization contains nearly 50,000 classes representing a vast variety of different diseases and causes of death. This evolution in terms of size was accompanied by an evolution in the way ontologies are engineered. Because no single individual has the expertise to develop such large-scale ontologies, ontology-engineering projects have evolved from small-scale efforts involving just a few domain experts to large-scale projects that require effective collaboration between dozens or even hundreds of experts, practitioners and other stakeholders. Understanding the way these different stakeholders collaborate will enable us to improve editing environments that support such collaborations. In this paper, we uncover how large ontology-engineering projects, such as the International Classification of Diseases in its 11th revision, unfold by analyzing usage logs of five different biomedical ontology-engineering projects of varying sizes and scopes using Markov chains. We discover intriguing interaction patterns (e.g., which properties users frequently change after specific given ones) that suggest that large collaborative ontology-engineering projects are governed by a few general principles that determine and drive development. From our analysis, we identify commonalities and differences between different projects that have implications for project managers, ontology editors, developers and contributors working on collaborative ontology-engineering projects and tools in the biomedical domain. Copyright © 2014 Elsevier Inc. All rights reserved.

Ergonomics and sustainability--challenges from global supply chains.

PubMed

Hasle, Peter; Jensen, Per Langaa

2012-01-01

The development of globalised supply chains is a major challenge for sustainability. For several years, there has been discussion within the profession whether and how ergonomics and human factors can play a role. Based on our research, we have identified five major challenges from global supply chains especially related to the social aspects of sustainability: (1) criteria for social sustainability, (2) the role of key performance indicators in the management of supply chains, (3) the constant changes in supply chains, (4) the challenge in establishing participation, and (5) the development of agency and regulatory mechanisms. There are obviously no clear and simple solutions to these challenges. One possible avenue for progress might lie in acquiring a greater understanding of the challenges from global supply chains and developing a strategy which combines social and long-term business sustainability. Starting from such a basis, the next step would be to find ways for the ergonomics and human factors community to create international collaboration which can impact specific global supply chains.

The sanitation value chain: its concept and new research collaboration project

NASA Astrophysics Data System (ADS)

Funamizu, N.

2017-03-01

Sanitation is essential for promoting health, preventing environment pollution, conserving ecosystem, and recovering and recycling resources. Therefore, it can be said that sanitation is closely related to such current global issues as poverty, urban slum, conservation of ecosystem, and resources management. Namely, the question, “How can we handle the waste from 10 billion people in future?” is a global environmental problem to be solved. In developing world, population is growing rapidly especially in urban slums and they have still high under 5 mortality and poverty issues. It also reported that 2.4 billion people are still using unimproved sanitation facilities, including 946 million people who are still practicing open defecation in 2015 (UN, 2015). On the other hand, depopulation and aging are progressing especially in rural area of developed world. Based on the above mentioned background, new research project on sanitation value chain has started. This is a collaboration project with LIPI, RIHN (Research Institute of Humanity and Nature, Kyoto) and HU (Hokkaido University). The concept of the sanitation value chain and the brief summary of the project are discussed in the keynote presentation. The concept of sanitation value chain proposed in the project : The project is proposing new concept, Sanitation Value Chain, which has the following basic policies: 1) Put values of people/and community in the centre of discussion, and prepare sanitation system to drive this value chain; 2) Design the sanitation system by focusing on incentive for individual users and community; 3) Recognize a sanitation system as an integrated system with social and technical systems; 4) Design the sanitation system by making a good matching between social characteristics and prerequisites of the technologies. The goals of the research are 1) To propose the Sanitation Value Chain as a common solution for both developing and developed countries, 2) To show the validity of the Sanitation Value Chain by pilot study on co-creation of the value chain at developing countries and Japan, 3) To contribute to making interdisciplinary academic foundation on sanitation.

Collaborative Manufacturing Management in Networked Supply Chains

NASA Astrophysics Data System (ADS)

Pouly, Michel; Naciri, Souleiman; Berthold, Sébastien

ERP systems provide information management and analysis to industrial companies and support their planning activities. They are currently mostly based on theoretical values (averages) of parameters and not on the actual, real shop floor data, leading to disturbance of the planning algorithms. On the other hand, sharing data between manufacturers, suppliers and customers becomes very important to ensure reactivity towards markets variability. This paper proposes software solutions to address these requirements and methods to automatically capture the necessary corresponding shop floor information. In order to share data produced by different legacy systems along the collaborative networked supply chain, we propose to use the Generic Product Model developed by Hitachi to extract, translate and store heterogeneous ERP data.

U.S. Army Technology Collaboration Briefing

DTIC Science & Technology

2012-09-11

engine boosting ( turbo chargers and super chargers), homogeneous charged compression, direct injection, etc. • Advanced light-weight materials...mitigation, recycling, and supply chain development. • Alternative fuels including biofuels, hydrogen, electricity, diesel , etc. • Vehicle

The Research on Integrated Strategy of Supply Chain Information Systems in the Automobile Industry Based on Order-To-Delivery Mode

NASA Astrophysics Data System (ADS)

Li, Ming; Gan, Lianzhen; He, Xuefeng

The automotive industry there are different degrees of impairment of many companies supply chain IT strategy. In this paper, in which the automotive industry supply chain management business cooperation between enterprises loose, poor exchange of information leading to the presence or delays in product customization, supply of raw materials, material control, production planning and control, sales and service and a fast response propose a series of typical problems of scientific and rational supply chain information integration strategy. The strategy through the development system integration platform, improve internal ERP system, implementation of supply chain management and other methods. Put some protection principles in the information process, to ensure the correct implementation of supply chain IT strategy, and ultimately achieve collaborative business development concept and enhance the automotive industry as a whole level of information.

Implementing a university-community-retail partnership model to facilitate community education on universal design.

PubMed

Price, Christine A; Zavotka, Susan L; Teaford, Margaret H

2004-10-01

A collaborative partnership model was used to develop and implement a state-wide community education program on universal design. University faculty, extension professionals, older adult service agencies, service learning students, and a community retail chain made up the original partnership. This collaboration resulted in a five-stage partnership model. The model was used to develop and disseminate a consumer education program to promote aging in place. The five stages include (a) identifying partner strengths and shared learning, (b) program development, (c) implementing the universal design program, (d) facilitating collaborative outreach, and (e) shifting toward sustainable outreach. A lack of knowledge exists among consumers, builders, and health care professionals regarding strategies for aging in place. Collaborations between educators, outreach professionals, students, and a retail partner resulted in increased interest and awareness about universal design changes that enable seniors to age in place.

B2B collaboration method through trust values for e-supply chain integrator: a case study of Malaysian construction industry

NASA Astrophysics Data System (ADS)

Ab. Aziz, Norshakirah; Ahmad, Rohiza; Dhanapal Durai, Dominic

2011-12-01

Limited trust, cooperation and communication have been identified as some of the issues that hinder collaboration among business partners. These one also true in the acceptance of e-supply chain integrator among organizations that involve in the same industry. On top of that, the huge number of components in supply chain industry also makes it impossible to include entire supply chain components in the integrator. Hence, this study intends to propose a method for identifying "trusted" collaborators for inclusion into an e-supply chain integrator. For the purpose of constructing and validating the method, the Malaysian construction industry is chosen as the case study due to its size and importance to the economy. This paper puts forward the background of the research, some relevant literatures which lead to trust values elements formulation, data collection from Malaysian Construction Supply Chain and a glimpse of the proposed method for trusted partner selection. Future work is also presented to highlight the next step of this research.

An IT-enabled supply chain model: a simulation study

NASA Astrophysics Data System (ADS)

Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana

2014-11-01

During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.

Urban community empowerment: context on supply chain collaboration in the SMEs

NASA Astrophysics Data System (ADS)

Masnita, Y.; Triyowati, H.; Rasyawal, M.

2018-01-01

The purpose of this research is to analyze the effect of EB application to operational performance through buyer-supplier collaboration, as well as the influence of buyer-supplier collaboration on operational performance. The context of small industries that ultimately by empowering the community will increase business competitiveness. Community empowerment is a process of creating a community and control over its environment. One concept that is considered as a new paradigm today is e-business (EB), which continues to grow. Data analysis method used is Structural Equation Model (SEM) by the use of PLS program. Based on the analysis from various industries such small garment manufacture, furniture and food, showed that all companies have a supply chain patterns are almost the same. Each company has associated premises supplier, manufacturing and enterprise users of the product. One way to empower the environment is to improve business competitiveness. The development of information and communication technology has been developing very fast and it has brought a significant impact for many aspects of life, including in the business world. EB existence of a significant impact on business practices, at least in terms of the improvement of direct marketing, and organizational transformation.

Continuity in health care: lessons from supply chain management.

PubMed

Meijboom, Bert R; Bakx, Saskia J W G C; Westert, Gert P

2010-01-01

In health care, multidisciplinary collaboration is both indispensable and complicated. We discuss organizational problems that occur in situations where multiple health care providers are required to cooperate for patients with complex needs. Four problem categories, labelled as communication, patient safety, waiting times and integration are distinguished. Then we develop a supply chain perspective on these problems in the sense of discussing remedies according to supply chain management (SCM) literature. This perspective implies a business focus on inter-organizational conditions and requirements necessary for delivering health care and cure across organizational borders. We conclude by presenting some strategic and policy recommendations.

SUPPLY CHAIN OPTIMIZATION FOR SUSTAINABILITY AND PROFITABILITY BY THE P-GRAPH FRAMEWORK

EPA Science Inventory

The proposed methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the U.S. EPA and the research group led by the founders of the P graph framework. U.S. EPA/ORD has substantial creditable experience with the development of indicat...

An improved spanning tree approach for the reliability analysis of supply chain collaborative network

NASA Astrophysics Data System (ADS)

Lam, C. Y.; Ip, W. H.

2012-11-01

A higher degree of reliability in the collaborative network can increase the competitiveness and performance of an entire supply chain. As supply chain networks grow more complex, the consequences of unreliable behaviour become increasingly severe in terms of cost, effort and time. Moreover, it is computationally difficult to calculate the network reliability of a Non-deterministic Polynomial-time hard (NP-hard) all-terminal network using state enumeration, as this may require a huge number of iterations for topology optimisation. Therefore, this paper proposes an alternative approach of an improved spanning tree for reliability analysis to help effectively evaluate and analyse the reliability of collaborative networks in supply chains and reduce the comparative computational complexity of algorithms. Set theory is employed to evaluate and model the all-terminal reliability of the improved spanning tree algorithm and present a case study of a supply chain used in lamp production to illustrate the application of the proposed approach.

Preparing for a Crisis.

ERIC Educational Resources Information Center

Perea, Rosalie D.; Morrison, Shirley

1997-01-01

To handle unforeseen crises, Albuquerque Public Schools established a critical-incident response team with a simple, understandable chain of command. The group aims to ensure maximum safety and people' well-being, develop a districtwide crisis-response-management plan, coordinate necessary training, and collaborate with community agencies…

Environmental Management Competitive Pressure Effect on SME Environmental Innovation Activities: A Green Supply Chain Perspective

NASA Astrophysics Data System (ADS)

Rashid, A. A.; Sidek, A. A.; Suffian, S. A.; Daud, M. R. C.

2018-01-01

The idea of assimilating green supply chain is to integrate and establish environmental management into the supply chain practices. The study aims to explore how environmental management competitive pressure influences a SME company in Malaysia to incorporate green supply chain integration, which is an efficient platform to develop environmental innovation. This study further advances green supply chain management research in Malaysia by using the method of quantitative analysis to analyze the model developed which data will be collected based on a sample of SMEs in Malaysia in manufacturing sector. The model developed in this study illustrates how environmental management competitive pressure from main competitors affects three fundamental dimensions of green supply chain integration. The research findings suggest that environmental management competitive pressure is a vital driving force for a SME company to incorporate internal and external collaboration in developing green product innovation. From the analysis conducted, the study strongly demonstrated that the best way for a company to counteract competitor’s environmental management success is to first implement strong internal green product development process then move to incorporate external environmental management innovation between their suppliers and customers. The findings also show that internal integration of green product innovation fully mediates the relationship of environmental management competitive pressure and the external integration of green product innovation.

COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Delivery Order 0034: Aircraft Coatings Modeling and Simulation

DTIC Science & Technology

2008-03-01

bonded potentials used. The interactions between the beads were described using 6-12 Lennard - Jones (LJ) potential (Equation (1)) with a 2.5 d cutoff...in Lennard - Jones potential for the non-bonded interactions is at 1.12 d in line with the second peak. The remainder of the g(r)chain-chain has...Simulator). 40 Lennard - Jones and Coulombic interactions for pairs of organic atoms were computed using a switching function with inner and outer cutoffs of

A Simulation Model Articulation of the REA Ontology

NASA Astrophysics Data System (ADS)

Laurier, Wim; Poels, Geert

This paper demonstrates how the REA enterprise ontology can be used to construct simulation models for business processes, value chains and collaboration spaces in supply chains. These models support various high-level and operational management simulation applications, e.g. the analysis of enterprise sustainability and day-to-day planning. First, the basic constructs of the REA ontology and the ExSpect modelling language for simulation are introduced. Second, collaboration space, value chain and business process models and their conceptual dependencies are shown, using the ExSpect language. Third, an exhibit demonstrates the use of value chain models in predicting the financial performance of an enterprise.

The Determination of Production and Distribution Policy in Push-Pull Production Chain with Supply Hub as the Junction Point

NASA Astrophysics Data System (ADS)

Sinaga, A. T.; Wangsaputra, R.

2018-03-01

The development of technology causes the needs of products and services become increasingly complex, diverse, and fluctuating. This causes the level of inter-company dependencies within a production chains increased. To be able to compete, efficiency improvements need to be done collaboratively in the production chain network. One of the efforts to increase efficiency is to harmonize production and distribution activities in the production chain network. This paper describes the harmonization of production and distribution activities by applying the use of push-pull system and supply hub in the production chain between two companies. The research methodology begins with conducting empirical and literature studies, formulating research questions, developing mathematical models, conducting trials and analyses, and taking conclusions. The relationship between the two companies is described in the MINLP mathematical model with the total cost of production chain as the objective function. Decisions generated by the mathematical models are the size of production lot, size of delivery lot, number of kanban, frequency of delivery, and the number of understock and overstock lot.

e-Infrastructures for e-Sciences 2013 A CHAIN-REDS Workshop organised under the aegis of the European Commission

NASA Astrophysics Data System (ADS)

The CHAIN-REDS Project is organising a workshop on "e-Infrastructures for e-Sciences" focusing on Cloud Computing and Data Repositories under the aegis of the European Commission and in co-location with the International Conference on e-Science 2013 (IEEE2013) that will be held in Beijing, P.R. of China on October 17-22, 2013. The core objective of the CHAIN-REDS project is to promote, coordinate and support the effort of a critical mass of non-European e-Infrastructures for Research and Education to collaborate with Europe addressing interoperability and interoperation of Grids and other Distributed Computing Infrastructures (DCI). From this perspective, CHAIN-REDS will optimise the interoperation of European infrastructures with those present in 6 other regions of the world, both from a development and use point of view, and catering to different communities. Overall, CHAIN-REDS will provide input for future strategies and decision-making regarding collaboration with other regions on e-Infrastructure deployment and availability of related data; it will raise the visibility of e-Infrastructures towards intercontinental audiences, covering most of the world and will provide support to establish globally connected and interoperable infrastructures, in particular between the EU and the developing regions. Organised by IHEP, INFN and Sigma Orionis with the support of all project partners, this workshop will aim at: - Presenting the state of the art of Cloud computing in Europe and in China and discussing the opportunities offered by having interoperable and federated e-Infrastructures; - Exploring the existing initiatives of Data Infrastructures in Europe and China, and highlighting the Data Repositories of interest for the Virtual Research Communities in several domains such as Health, Agriculture, Climate, etc.

Strategic information technology alliances for effective health-care supply chain management.

PubMed

Shih, Stephen C; Rivers, Patrick A; Hsu, H Y Sonya

2009-08-01

To gain and sustain competitive advantage, health-care providers have to continuously review and renovate their operational and information technology (IT) strategies through collaborative and cooperative endeavour with their supply chain channel members. This paper explores new ways of enhancing a health-care organization's responsiveness to changes and increasing its competitiveness through implementing strategic information technology alliances among channel members in a health-care supply chain network. An overview of issues and problems (e.g. bullwhip effect, negative externalities and free-riding phenomenon in multichannel supply chains) presented in the health-care supply chains is first delineated. This paper further goes over the issues of health-care supply chain coordination and integration for strategic IT alliances, followed by the discussion of the spillover effect of IT investments. A number of viable IT practices (such as information sharing and Internet-enabled supply chain portal) for effective health-care supply chain collaboration and coordination are then examined in this research. Finally, the paper discusses how strategic IT alliances can help improve the effectiveness of health-care supply chain management.

Collaborative Engineering for Research and Development

NASA Technical Reports Server (NTRS)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

Collaborative Product Development in an R&D Environment

NASA Technical Reports Server (NTRS)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.; Peterson, Paul L.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

Concurrent enterprise: a conceptual framework for enterprise supply-chain network activities

NASA Astrophysics Data System (ADS)

Addo-Tenkorang, Richard; Helo, Petri T.; Kantola, Jussi

2017-04-01

Supply-chain management (SCM) in manufacturing industries has evolved significantly over the years. Recently, a lot more relevant research has picked up on the development of integrated solutions. Thus, seeking a collaborative optimisation of geographical, just-in-time (JIT), quality (customer demand/satisfaction) and return-on-investment (profits), aspects of organisational management and planning through 'best practice' business-process management - concepts and application; employing system tools such as certain applications/aspects of enterprise resource planning (ERP) - SCM systems information technology (IT) enablers to enhance enterprise integrated product development/concurrent engineering principles. This article assumed three main organisation theory applications in positioning its assumptions. Thus, proposing a feasible industry-specific framework not currently included within the SCOR model's level four (4) implementation level, as well as other existing SCM integration reference models such as in the MIT process handbook's - Process Interchange Format (PIF), the TOVE project, etc. which could also be replicated in other SCs. However, the wider focus of this paper's contribution will be concentrated on a complimentary proposed framework to the SCC's SCOR reference model. Quantitative empirical closed-ended questionnaires in addition to the main data collected from a qualitative empirical real-life industrial-based pilot case study were used: To propose a conceptual concurrent enterprise framework for SCM network activities. This research adopts a design structure matrix simulation approach analysis to propose an optimal enterprise SCM-networked value-adding, customised master data-management platform/portal for efficient SCM network information exchange and an effective supply-chain (SC) network systems-design teams' structure. Furthermore, social network theory analysis will be employed in a triangulation approach with statistical correlation analysis to assess the scale/level of frequency, importance, level of collaborative-ness, mutual trust as well as roles and responsibility among the enterprise SCM network for systems product development (PD) design teams' technical communication network as well as extensive literature reviews.

Contingent approach to Internet-based supply network integration

NASA Astrophysics Data System (ADS)

Ho, Jessica; Boughton, Nick; Kehoe, Dennis; Michaelides, Zenon

2001-10-01

The Internet is playing an increasingly important role in enhancing the operations of supply networks as many organizations begin to recognize the benefits of Internet- enabled supply arrangements. However, the developments and applications to-date do not extend significantly beyond the dyadic model, whereas the real advantages are to be made with the external and network models to support a coordinated and collaborative based approach. The DOMAIN research group at the University of Liverpool is currently defining new Internet- enabled approaches to enable greater collaboration across supply chains. Different e-business models and tools are focusing on different applications. Using inappropriate e- business models, tools or techniques will bring negative results instead of benefits to all the tiers in the supply network. Thus there are a number of issues to be considered before addressing Internet based supply network integration, in particular an understanding of supply chain management, the emergent business models and evaluating the effects of deploying e-business to the supply network or a particular tier. It is important to utilize a contingent approach to selecting the right e-business model to meet the specific supply chain requirements. This paper addresses the issues and provides a case study on the indirect materials supply networks.

Winners and losers in the complex web of global supply chains.

PubMed

Glendon, Lee

2013-01-01

This paper discusses how supply chain, risk and business continuity professionals can collaboratively address the consequences of increasing supply chain complexity in order to deliver both resilient and sustainable supply chains. The paper identifies the key drivers of complexity supported by recent case examples, including the equine DNA scandal and the Rana Plaza tragedy in Bangladesh.

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain

PubMed Central

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization. PMID:28873432

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

PubMed

Xing, Lizhi

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

Modelling and analysis of workflow for lean supply chains

NASA Astrophysics Data System (ADS)

Ma, Jinping; Wang, Kanliang; Xu, Lida

2011-11-01

Cross-organisational workflow systems are a component of enterprise information systems which support collaborative business process among organisations in supply chain. Currently, the majority of workflow systems is developed in perspectives of information modelling without considering actual requirements of supply chain management. In this article, we focus on the modelling and analysis of the cross-organisational workflow systems in the context of lean supply chain (LSC) using Petri nets. First, the article describes the assumed conditions of cross-organisation workflow net according to the idea of LSC and then discusses the standardisation of collaborating business process between organisations in the context of LSC. Second, the concept of labelled time Petri nets (LTPNs) is defined through combining labelled Petri nets with time Petri nets, and the concept of labelled time workflow nets (LTWNs) is also defined based on LTPNs. Cross-organisational labelled time workflow nets (CLTWNs) is then defined based on LTWNs. Third, the article proposes the notion of OR-silent CLTWNS and a verifying approach to the soundness of LTWNs and CLTWNs. Finally, this article illustrates how to use the proposed method by a simple example. The purpose of this research is to establish a formal method of modelling and analysis of workflow systems for LSC. This study initiates a new perspective of research on cross-organisational workflow management and promotes operation management of LSC in real world settings.

A collaborative scheduling model for the supply-hub with multiple suppliers and multiple manufacturers.

PubMed

Li, Guo; Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

PubMed Central

Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment. PMID:24892104

CosmoSIS: A system for MC parameter estimation

DOE PAGES

Bridle, S.; Dodelson, S.; Jennings, E.; ...

2015-12-23

CosmoSIS is a modular system for cosmological parameter estimation, based on Markov Chain Monte Carlo and related techniques. It provides a series of samplers, which drive the exploration of the parameter space, and a series of modules, which calculate the likelihood of the observed data for a given physical model, determined by the location of a sample in the parameter space. While CosmoSIS ships with a set of modules that calculate quantities of interest to cosmologists, there is nothing about the framework itself, nor in the Markov Chain Monte Carlo technique, that is specific to cosmology. Thus CosmoSIS could bemore » used for parameter estimation problems in other fields, including HEP. This paper describes the features of CosmoSIS and show an example of its use outside of cosmology. Furthermore, it also discusses how collaborative development strategies differ between two different communities: that of HEP physicists, accustomed to working in large collaborations, and that of cosmologists, who have traditionally not worked in large groups.« less

Advancing health system integration through supply chain improvement.

PubMed

Rosser, Mike

2006-01-01

Collaboration is a key element to success in the provision of sustainable and integrated healthcare services. Among the many initiatives undertaken to improve service quality and reduce costs, collaboration among hospitals in Ontario has been difficult to achieve; however, voluntary collaboration is vital to achieving transformation of the magnitude envisioned by system leaders.

Critical success factors for mutual collaboration with suppliers in IT outsourcing industry: a case study of a top IT outsourcing company in Korea

NASA Astrophysics Data System (ADS)

Cha, Kyung-Jin; Kim, Yang Sok

2018-01-01

Nowadays, information technology (IT) outsourcing companies face enduring demands to reduce cost while increasing productivity. This pressure leads many IT outsourcing companies to rely on outsourcing arrangements with IT personnel suppliers. In order to maximise efficiency, outsourcing companies have focused on fostering high-performing suppliers through improved collaboration and mutual relations. However, it is very difficult to advance to a long-term partnership using the existing outsourcing process because of insufficient collaboration between IT outsourcing companies and their suppliers. Based on collaboration perspective of supply chain management (SCM), this study identifies the critical success factors for collaborative strategic partnerships and presents an evaluation framework for assessing and managing suppliers. We have developed an organisational process model for Supplier relationship management (SRM)-based collaboration which includes some of the key constructs from the previous studies and interviews with the IT outsourcing industry people. In this study, we will identify four types of strategic suppliers and suggest approaches for improving collaborative relationship between an IT outsourcing company and its partner companies. In addition, to validate the feasibility of the proposed model, we applied it to a well-known Korean IT outsourcing company 'A'.

Coopetitive Supply Chain Relationship Model: Application to the Smartphone Manufacturing Network.

PubMed

Kwok, Jeremy Jie Ming; Lee, Dong-Yup

2015-01-01

Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business.

Coopetitive Supply Chain Relationship Model: Application to the Smartphone Manufacturing Network

PubMed Central

Kwok, Jeremy Jie Ming; Lee, Dong-Yup

2015-01-01

Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business. PMID:26186227

Commitment to and preparedness for sustainable supply chain management in the oil and gas industry.

PubMed

Wan Ahmad, Wan Nurul K; Rezaei, Jafar; Tavasszy, Lóránt A; de Brito, Marisa P

2016-09-15

Our current dependency on the oil and gas (O&G) industry for economic development and social activities necessitates research into the sustainability of the industry's supply chains. At present, studies on sustainable supply chain management (SSCM) practices in the industry do not include firm-internal factors that affect the sustainability strategies employed by different functional areas of its supply chains. Our study aims to address this gap by identifying the relevant internal factors and exploring their relationship with SSCM strategies. Specifically, we discuss the commitment to and preparedness for sustainable practices of companies that operate in upstream and downstream O&G supply chain. We study the impact of these factors on their sustainability strategies of four key supply chain functions: supplier management, production management, product stewardship and logistics management. The analyses of data collected through a survey among 81 companies show that management preparedness may enhance sustainable supply chain strategies in the O&G industry more than commitment does. Among the preparedness measures, management of supply chain operational risks is found to be vital to the sustainability of all supply chain functions except for production management practices. The findings also highlight the central importance of supplier and logistics management to the achievement of sustainable O&G supply chains. Companies must also develop an organizational culture that encourages, for example, team collaboration and proactive behaviour to finding innovative sustainability solutions in order to translate commitment to sustainable practices into actions that can produce actual difference to their SSCM practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Implementation of supply chain business application through business model canvas and waterfall framework collaborations for fish farmers SMEs in ulekan market bandung

NASA Astrophysics Data System (ADS)

Priyadi, Y.; Prasetio, A.

2018-03-01

This research resulted in the development of e-SCM application, in small-scale group of fish farmers based on Open Source technology in Ulekan Market Bandung, by collaborating the implementation of e-SCM and Data Management. Then proceed with the application of supply chain business through collaboration Business Model Canvas and Waterfall Framework. For the design of business process reengineering in this activity, it produces a context diagram called e-SCM SME Fish consisting of five entities directly involved with the system, namely: fish shop supervisor, fish shop retailer, employees, fish farmers, and customers. Referring to the Context Diagram, decomposition process of Level 0 e-SCM SMEs Fish. The decomposition results in Data Flow Diagram Level 1 for four sub processes, namely: business partners, transactions, retailer stock, and documentation. Result of nine blocks on Business Model Canvas on e-SCM activity, its category consist of Priority 1, Priority 2, Direct, Indirect, Purchase/e-SCM, Transactional, Community, Asset Sale, Physical Asset, Human, Production, Strategic Alliance -competitors, Coopetition, Buyer supplier relationship, Fixed Cost, Variable Cost. For integration of data management on Localhost Server media on e-SCM using http://whyphi: 8080 address, as prototype which will soon be adopted by farmer fish farmer.

Workflow4Metabolomics: a collaborative research infrastructure for computational metabolomics

PubMed Central

Giacomoni, Franck; Le Corguillé, Gildas; Monsoor, Misharl; Landi, Marion; Pericard, Pierre; Pétéra, Mélanie; Duperier, Christophe; Tremblay-Franco, Marie; Martin, Jean-François; Jacob, Daniel; Goulitquer, Sophie; Thévenot, Etienne A.; Caron, Christophe

2015-01-01

Summary: The complex, rapidly evolving field of computational metabolomics calls for collaborative infrastructures where the large volume of new algorithms for data pre-processing, statistical analysis and annotation can be readily integrated whatever the language, evaluated on reference datasets and chained to build ad hoc workflows for users. We have developed Workflow4Metabolomics (W4M), the first fully open-source and collaborative online platform for computational metabolomics. W4M is a virtual research environment built upon the Galaxy web-based platform technology. It enables ergonomic integration, exchange and running of individual modules and workflows. Alternatively, the whole W4M framework and computational tools can be downloaded as a virtual machine for local installation. Availability and implementation: http://workflow4metabolomics.org homepage enables users to open a private account and access the infrastructure. W4M is developed and maintained by the French Bioinformatics Institute (IFB) and the French Metabolomics and Fluxomics Infrastructure (MetaboHUB). Contact: contact@workflow4metabolomics.org PMID:25527831

Workflow4Metabolomics: a collaborative research infrastructure for computational metabolomics.

PubMed

Giacomoni, Franck; Le Corguillé, Gildas; Monsoor, Misharl; Landi, Marion; Pericard, Pierre; Pétéra, Mélanie; Duperier, Christophe; Tremblay-Franco, Marie; Martin, Jean-François; Jacob, Daniel; Goulitquer, Sophie; Thévenot, Etienne A; Caron, Christophe

2015-05-01

The complex, rapidly evolving field of computational metabolomics calls for collaborative infrastructures where the large volume of new algorithms for data pre-processing, statistical analysis and annotation can be readily integrated whatever the language, evaluated on reference datasets and chained to build ad hoc workflows for users. We have developed Workflow4Metabolomics (W4M), the first fully open-source and collaborative online platform for computational metabolomics. W4M is a virtual research environment built upon the Galaxy web-based platform technology. It enables ergonomic integration, exchange and running of individual modules and workflows. Alternatively, the whole W4M framework and computational tools can be downloaded as a virtual machine for local installation. http://workflow4metabolomics.org homepage enables users to open a private account and access the infrastructure. W4M is developed and maintained by the French Bioinformatics Institute (IFB) and the French Metabolomics and Fluxomics Infrastructure (MetaboHUB). contact@workflow4metabolomics.org. © The Author 2014. Published by Oxford University Press.

A Review of Supply Chain Collaboration Practices for Small and Medium-sized Manufacturers

NASA Astrophysics Data System (ADS)

Wee, SY; Thoo, AC; Z, Sulaiman; FM, Muharam

2016-05-01

For the decades, organizations have endeavored to look for external sources for opportunities to achieve efficient and responsive supply chain with their partners especially for small and medium manufacturers (SMM). In this scenario, supply chain collaboration (SCC) is an interaction between supply chain members with the purpose of utilizes the knowledge and resources of customers and suppliers, and integrates the flows of products and information in order to achieve a common goal and obtain mutual benefit. The essential SCC dimensions for SMMs comprised of information sharing, joint knowledge creation, joint decision making, goal congruence and incentive sharing. The successful implementation of SCC can give SMMs an edge over their competitors. This paper aims to introduce a review of SCC practices for SMM. Overall, the findings provide managerial insights for the SMM in SCC implementation owing to resource scarcity and the need to draw SCC in order to ensure a sustainable competitive advantage.

Quality control of goji (fruits of Lycium barbarum L. and L. chinense Mill.): A value chain analysis perspective.

PubMed

Yao, Ruyu; Heinrich, Michael; Wang, Zigui; Weckerle, Caroline S

2018-06-14

Goji (fruits of Lycium barbarum L. and L. chinense Mill., Solanaceae) have been used as a traditional food and medicine for hundreds of years in Asian countries and are now consumed globally. Quality of herbal medicines is critical for safe use and has been shown to be affected by value chains. Using a value chain (VC) framework, we aim at understanding the influence of different VC types on goji quality and revenue of stakeholders. Participant observation and semi-structured interviews were conducted during five months of fieldwork in the main production areas in China with a total of 65 stakeholders. Quality of goji, behaviour and financial performance of stakeholders was documented and analysed for different VCs. Ten different types of VCs were identified. VCs with vertical integration and horizontal collaboration were found to have a more coherent quality control and better goji quality as well as improved stakeholders' financial performance. Vertical integration at different levels was found for independent farmer-based VCs, horizontal collaboration was found in the cooperative-based VCs. Full vertically integrated VCs were found in large-scale production. Goji quality and stakeholders' revenues are linked with different types of VCs which mirror stakeholders' behaviour driven by target markets. Considering their positive influence on quality and revenues, well-developed vertically integrated value chains are likely to become more important in the near future. Copyright © 2018. Published by Elsevier B.V.

Risk management abilities in multimodal maritime supply chains: Visibility and control perspectives.

PubMed

Vilko, Jyri; Ritala, Paavo; Hallikas, Jukka

2016-11-29

Supply chain complexity and disintegration lead to increased uncertainty from a stakeholders' perspective, which is emerging as one of the major challenges of risk management. The ability to identify risks has weakened, as the responsibility of supply chain risk management is handed over to outside service providers. Regardless, the risks, their visibility and their impact depend on the position of the companies in the supply chain. The actors in the chain must therefore collaborate to create effective risk management conditions. This challenging situation is especially pronounced in multimodal maritime supply chains, where the risks and actor focality are high. This paper contributes to current risk management literature by providing a holistic and systemic view of risk visibility and control in maritime supply chains. The study employs broad-based, qualitative interview data collected from actors operating in southern Finland and the Gulf of Finland as well as an expert-panel assessment of the related risk management abilities. The results show a high level of variance in the level of risk identification and visibility between the actors in question. This further suggests that collaboration in supply chain risk management is essential, as an awareness of the risks and their control mechanisms do not necessarily reside in the same company. Copyright © 2016 Elsevier Ltd. All rights reserved.

Measuring and understanding radon adsorption in microporous materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noel, Raymond, E-mail: noel@cppm.in2p3.fr; CINaM, Aix-Marseille Université, CNRS, Marseille; Busto, José, E-mail: busto@cppm.in2p3.fr

The background from the radon decay chain is the strongest constraint for many experiments working at low energy and very low counting rate. A facility for studying the optimum radon capture by very selective porous materials was developed at CPPM in the context of the SuperNEM O project. In collaboration with Institut Jean Lamour, studies were carried out for better understanding radon adsorption in carbon adsorbents.

Supply Chain Resilience: Assessing Resilience over the Life Cycle of Capital Equipment

DTIC Science & Technology

2014-07-09

Purposes): [] CRADA (Cooperative Research and Development Agreement) exists [] Photo/ Video Opportunities [] STEM -outreach Related [] New Invention...Recovery C9 10.6 / 0.7 9.8 / -1.1 Dispersion ClO 8.4 13.4 15.3 /11.0 Collaboration Cll -0.1 I -10.5 3.6 / -9.0 Organization Cl2 6.3 / -3.2 Security C l3

A decade of integration and collaboration: the development of integrated health care in Sweden 2000–2010

PubMed Central

Ahgren, Bengt; Axelsson, Runo

2011-01-01

Introduction The recent history of integrated health care in Sweden is explored in this article, focusing on the first decade of the 2000s. In addition, there are some reflections about successes and setbacks in this development and challenges for the next decade. Description of policy and practice The first efforts to integrate health care in Sweden appeared in the beginning of the 1990s. The focus was on integration of intra-organisational processes, aiming at a more cost-effective health care provision. Partly as a reaction to the increasing economism at that time, there was also a growing interest in quality improvement. Out of this work emerged the ‘chains of care’, integrating all health care providers involved in the care of specific patient groups. During the 2000s, many county councils have also introduced inter-organisational systems of ‘local health care’. There has also been increasing collaboration between health professionals and other professional groups in different health and welfare services. Discussion and conclusion Local health care meant that the chains of care and other forms of integration and collaboration became embedded in a more integrative context. At the same time, however, policy makers have promoted free patient choice in primary health care and also mergers of hospitals and clinical departments. These policies tend to fragment the provision of health care and have an adverse effect on the development of integrated care. As a counterbalance, more efforts should be put into evaluation of integrated health care, in order to replace political convictions with evidence concerning the benefits of such health care provision. PMID:21677844

The Food Marketing Institute and the National Council of Chain Restaurants: animal welfare and the retail food industry in the United States of America.

PubMed

Brown, K H; Hollingsworth, J

2005-08-01

In order to achieve real change, there must be a motivating force and all the stakeholders need to be involved. This is the premise of the animal welfare programme developed for the food retail, wholesale and chain restaurant industries in the United States of America (USA) by the Food Marketing Institute (FMI) and the National Council of Chain Restaurants (NCCR). This paper outlines a collaborative process that retailers and producers in the USA are using to enhance the care and welfare of animals in commercial food production. Although the efforts of the FMI and the NCCR are still underway, the process provides one example of how different parts of the food production system can work together to achieve positive change.

Geneva-Seattle collaboration in support of developing country vaccine manufacturing.

PubMed

Stevenson, Michael A

2018-04-01

Vaccines were once produced almost exclusively by state-supported entities. While they remain essential tools for public health protection, the majority of the world's governments have allowed industry to assume responsibility for this function. This is significant because while the international harmonisation of quality assurance standards have effectively increased vaccine safety, they have also reduced the number of developing country vaccine producers, and Northern multinational pharmaceutical companies have shown little interest in offering the range of low-priced products needed in low and middle-income-country contexts. This article examines how public-private collaboration is relevant to contemporary efforts aimed at strengthening developing country manufacturers' capacity to produce high-quality, low-priced vaccines. Specifically, it casts light on the important and largely complimentary roles of the World Health Organization, The Bill and Melinda Gates Foundation, and the Seattle-based non-profit PATH, in this process. The take away message is that external support remains critical to ensuring that developing country vaccine manufacturers have the tools needed to produce for both domestic and global markets, and the United Nations supply chain, and collaboration at the public-private interface is driving organisational innovation focused on meeting these goals.

Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

NASA Astrophysics Data System (ADS)

Ma, K.; Thomassey, S.; Zeng, X.

2017-10-01

In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

The Effects of Supply Chain Orientation, Supply Chain Management, and Collaboration on Perceived Firm Performance

DTIC Science & Technology

2012-06-01

Communalities – Factor Analysis .................................................................... 30 Table 3. Total Variance Explained – Factor Analysis...43 Table 12. Pearson Correlation...standards of corporate values and allying oneself with exchange partners having similar values, (3) communicating valuable information, including

Connecting the "Hot Fusion Island" to the Nuclear Mainland: Search for 283,284,285Fl Decay Chains

NASA Astrophysics Data System (ADS)

Rykaczewski, K. P.; Utyonkov, V. K.; Brewer, N. T.; Grzywacz, R. K.; Miernik, K.; Roberto, J. B.; Oganessian, Yu. Ts.; Polyakov, A. N.; Tsyganov, Yu. S.; Voinov, A. A.; Abdullin, F. Sh.; Dmitriev, S. N.; Itkis, M. G.; Sabelnikov, A. V.; Sagaidak, R. N.; Shirokovsky, I. V.; Shumeiko, M. V.; Subbotin, V. G.; Sukhov, A. M.; Vostokin, G. K.; Hamilton, J. H.; Henderson, R. A.; Stoyer, M. A.

The program of studies on superheavy nuclei to identify new isotopes anchoring the decay chains from the Hot Fusion Island to the Nuclear Mainland has been started at the Dubna Gas Filled Recoil Separator (DGFRS, JINR Dubna) in collaboration between Russia, US and Poland. These studies are performed with new detection and digital data acquisition system developed at ORNL (Oak Ridge) and UT (Knoxville). The evidence for fast fission of the new isotope 284Fl is presented. The low cross section for the 3n channel of 239Pu + 48Ca reaction is attributed to lower than expected fission barriers in 287-284Fl.

An Alignment Model for Collaborative Value Networks

NASA Astrophysics Data System (ADS)

Bremer, Carlos; Azevedo, Rodrigo Cambiaghi; Klen, Alexandra Pereira

This paper presents parts of the work carried out in several global organizations through the development of strategic projects with high tactical and operational complexity. By investing in long-term relationships, strongly operating in the transformation of the competitive model and focusing on the value chain management, the main aim of these projects was the alignment of multiple value chains. The projects were led by the Axia Transformation Methodology as well as by its Management Model and following the principles of Project Management. As a concrete result of the efforts made in the last years in the Brazilian market this work also introduces the Alignment Model which supports the transformation process that the companies undergo.

Development of Smart Precision Forest in Conifer Plantation in Japan Using Laser Scanning Data

NASA Astrophysics Data System (ADS)

Katoh, M.; Deng, S.; Takenaka, Y.; Cheung, K.; Oono, K.; Horisawa, M.; Hyyppä, J.; Yu, X.; Liang, X.; Wang, Y.

2017-10-01

Currently, the authors are planning to launch a consortium effort toward Japan's first smart precision forestry project using laser data and to develop this technology throughout the country. Smart precision forestry information gathered using the Nagano model (laser scanning from aircraft, drone, and backpack) is being developed to improve the sophistication of forest information, reduce labor-intensive work, maintain sustainable timber productivity, and facilitate supply chain management by laser sensing information in collaboration with industry, academia, and government. In this paper, we outline the research project and the technical development situation of unmanned aerial vehicle laser scanning.

Within the International Collaboration CHAIN: a Summary of Events Observed with Flare Monitoring Telescope (FMT) in Peru

NASA Astrophysics Data System (ADS)

Ishitsuka, J.; Asai, A.; Morita, S.; Terrazas, R.; Cabezas, D.; Gutierrez, V.; Martinez, L.; Buleje, Y.; Loayza, R.; Nakamura, N.; Takasao, S.; Yoshinaga, Y.; Hillier, A.; Otsuji, K.; Shibata, K.; Ishitsuka, M.; Ueno, S.; Kitai, R.; Ishii, T.; Ichimoto, K.; Nagata, S.; Narukage, N.

2014-02-01

In 2008 we inaugurated the new Solar Observatory in collaboration with Faculty of Sciences of San Luis Gonzaga de Ica National University, 300 km south of Lima. In March of 2010 a Flare Monitoring Telescope of Hida Observatory of Kyoto University arrived to Ica, part of CHAIN Project (Continuous H-alpha Imaging Network). In October of the same year we hosted the First FMT Workshop in Ica, then in July of 2011 the Second FMT Workshop was opened. Since that we are focused on two events registered by FMT in Peru to publish results. FMT is a good tool to introduce young people from universities into scientific knowledge; it is good also for education in Solar Physics and outreach. Details of this successful collaboration will be explained in this presentation.

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

The latent causal chain of industrial water pollution in China.

PubMed

Miao, Xin; Tang, Yanhong; Wong, Christina W Y; Zang, Hongyu

2015-01-01

The purpose of this paper is to discover the latent causal chain of industrial water pollution in China and find ways to cure the want on discharge of toxic waste from industries. It draws evidences from the past pollution incidents in China. Through further digging the back interests and relations by analyzing representative cases, extended theory about loophole derivations and causal chain effect is drawn. This theoretical breakthrough reflects deeper causality. Institutional defect instead of human error is confirmed as the deeper reason of frequent outbreaks of water pollution incidents in China. Ways for collaborative environmental governance are proposed. This paper contributes to a better understanding about the deep inducements of industrial water pollution in China, and, is meaningful for ensuring future prevention and mitigation of environmental pollution. It illuminates multiple dimensions for collaborative environmental governance to cure the stubborn problem.

Building a Collaborative Network for Education and Training in International Trade Facilitation Clusters

NASA Astrophysics Data System (ADS)

Clendenin, John A.; Petrova, Nadya N.; Gill, Joshua K.

The authors present the benefits of collaboration rather than competition in developing educational and training resources for international trade within a geographic region and explore the challenges for business partners, governments and educational institutions. The paper indicates that flexibility in the 21st Century is critical, particularly when striving for virtual implementations of the solution services. It is essential, say the authors, for educators, governments and business executives to focus on performance and the careful orchestration and integration of business, policy and information technology for “Networking” that successfully stimulates inter-governmental cooperation and innovative policies that foster Regional trade facilitation. An innovative way to enhance 21st Century Trade Facilitation is offered with Supply Chain Centers of Regional Excellence (SCcORE).

Integrated Business Process Adaptation towards Friction-Free Business-to-Business Collaboration

ERIC Educational Resources Information Center

Shan, Zhe

2011-01-01

One key issue in process-aware E-commerce collaboration is the orchestration of business processes of multiple business partners throughout a supply chain network in an automated and seamless way. Since each partner has its own internal processes with different control flow structures and message interfaces, the real challenge lies in verifying…

Application of ESE Data and Tools to Air Quality Management: Services for Helping the Air Quality Community use ESE Data (SHAirED)

NASA Technical Reports Server (NTRS)

Falke, Stefan; Husar, Rudolf

2011-01-01

The goal of this REASoN applications and technology project is to deliver and use Earth Science Enterprise (ESE) data and tools in support of air quality management. Its scope falls within the domain of air quality management and aims to develop a federated air quality information sharing network that includes data from NASA, EPA, US States and others. Project goals were achieved through a access of satellite and ground observation data, web services information technology, interoperability standards, and air quality community collaboration. In contributing to a network of NASA ESE data in support of particulate air quality management, the project will develop access to distributed data, build Web infrastructure, and create tools for data processing and analysis. The key technologies used in the project include emerging web services for developing self describing and modular data access and processing tools, and service oriented architecture for chaining web services together to assemble customized air quality management applications. The technology and tools required for this project were developed within DataFed.net, a shared infrastructure that supports collaborative atmospheric data sharing and processing web services. Much of the collaboration was facilitated through community interactions through the Federation of Earth Science Information Partners (ESIP) Air Quality Workgroup. The main activities during the project that successfully advanced DataFed, enabled air quality applications and established community-oriented infrastructures were: develop access to distributed data (surface and satellite), build Web infrastructure to support data access, processing and analysis create tools for data processing and analysis foster air quality community collaboration and interoperability.

Outbreak of E. coli O157:H7 associated with lettuce served at fast food chains in the Maritimes and Ontario, Canada, Dec 2012

PubMed Central

Tataryn, J; Morton, V; Cutler, J; McDonald, L; Whitfield, Y; Billard, B; Gad, RR; Hexemer, A

2014-01-01

Background Identification and control of multi-jurisdictional foodborne illness outbreaks can be complex because of their multidisciplinary nature and the number of investigative partners involved. Objective To describe the multi-jurisdictional outbreak response to an E. coli O157:H7 outbreak in Canada that highlights the importance of early notification and collaboration and the value of centralized interviewing. Methods Investigators from local, provincial and federal jurisdictions, using a national outbreak response protocol to clarify roles and responsibilities and facilitate collaboration, conducted a rapid investigation that included centralized re-interview of cases, descriptive methods, binomial probability, and traceback findings to identify the source of the outbreak. Results There were 31 laboratory confirmed cases identified in New Brunswick, Nova Scotia, and Ontario. Thirteen cases (42%) were hospitalized and one case (3%) developed hemolytic uremic syndrome; there were no deaths. Due to early notification a coordinated investigation was initiated before laboratory subtyping was available. Re-interview of cases identified 10 cases who had not initially reported exposure to the source of the outbreak. Less than one week after the Outbreak Investigation Coordinating Committee was formed, consumption of shredded lettuce from a fast food chain was identified as the likely source of the illnesses and the implicated importer/processor initiated a precautionary recall the same day. Conclusion This outbreak investigation highlights the importance of early notification, prompt re-interviewing and collaboration to rapidly identify the source of an outbreak. PMID:29769900

Translation from UML to Markov Model: A Performance Modeling Framework

NASA Astrophysics Data System (ADS)

Khan, Razib Hayat; Heegaard, Poul E.

Performance engineering focuses on the quantitative investigation of the behavior of a system during the early phase of the system development life cycle. Bearing this on mind, we delineate a performance modeling framework of the application for communication system that proposes a translation process from high level UML notation to Continuous Time Markov Chain model (CTMC) and solves the model for relevant performance metrics. The framework utilizes UML collaborations, activity diagrams and deployment diagrams to be used for generating performance model for a communication system. The system dynamics will be captured by UML collaboration and activity diagram as reusable specification building blocks, while deployment diagram highlights the components of the system. The collaboration and activity show how reusable building blocks in the form of collaboration can compose together the service components through input and output pin by highlighting the behavior of the components and later a mapping between collaboration and system component identified by deployment diagram will be delineated. Moreover the UML models are annotated to associate performance related quality of service (QoS) information which is necessary for solving the performance model for relevant performance metrics through our proposed framework. The applicability of our proposed performance modeling framework in performance evaluation is delineated in the context of modeling a communication system.

The Role of the Food Industry in Obesity Prevention.

PubMed

Binks, Martin

2016-06-01

Obesity is a complex disease of diverse etiology. Among the potential influences in the development of obesity, the food supply chain remains an important influence. We provide a conceptual overview related to the food industry's role in obesity prevention. We first discuss some limitations of current public health efforts. We then describe how a model that attends to personal autonomy in the context of supportive policy intervention can empower individuals in their efforts to navigate the food supply chain. We then provide an evidence informed overview of key areas where continued efforts to collaboratively engage the food industry, through solution-focused dialogue and action, have the potential to contribute to obesity prevention. While challenging, appropriately transparent, well-governed public-private partnerships have the demonstrated potential to benefit the communities we serve.

Harmonizing Landsat and Sentinel-2 Reflectances for Better Land Monitoring

NASA Technical Reports Server (NTRS)

Masek, Jeffrey; Vermote, Eric; Franch, Belen; Roger, Jean-Claude; Skakun, Sergii; Claverie, Martin; Dungan, Jennifer

2016-01-01

When combined, Landsat and ESA Sentinel-2 observations can provide 2-4 day coverage for the global land area. A collaboration among NASA GSFC (Goddard Space Flight Center), University of Maryland, and NASA Ames has developed a processing chain to create seamless, "harmonized" reflectance products using standardized atmospheric correction, BRDF (Bidirectional Reflectance Distribution Function) adjustment, spectral bandpass adjustment, and gridding algorithms. These products point the way to a "30-m MODIS (Moderate Resolution Imaging Spectroradiometer)" capability for agricultural and ecosystem monitoring by leveraging international sensors.

A PageRank-based reputation model for personalised manufacturing service recommendation

NASA Astrophysics Data System (ADS)

Zhang, W. Y.; Zhang, S.; Guo, S. S.

2017-05-01

The number of manufacturing services for cross-enterprise business collaborations is increasing rapidly because of the explosive growth of Web service technologies. This trend demands intelligent and robust models to address information overload in order to enable efficient discovery of manufacturing services. In this paper, we present a personalised manufacturing service recommendation approach, which combines a PageRank-based reputation model and a collaborative filtering technique in a unified framework for recommending the right manufacturing services to an active service user for supply chain deployment. The novel aspect of this research is adapting the PageRank algorithm to a network of service-oriented multi-echelon supply chain in order to determine both user reputation and service reputation. In addition, it explores the use of these methods in alleviating data sparsity and cold start problems that hinder traditional collaborative filtering techniques. A case study is conducted to validate the practicality and effectiveness of the proposed approach in recommending the right manufacturing services to active service users.

Demonstrating the Effect of Supply Chain Disruptions through an Online Beer Distribution Game

ERIC Educational Resources Information Center

Sarkar, Sourish; Kumar, Sanjay

2016-01-01

This article describes a classroom tool to teach the impact of supply chain disruptions and mitigation strategies based on information sharing and collaboration. The tool is an adaptation of the Beer Distribution Game, is easy to play, and can be hosted online or on local servers. The game considers several scenarios based on the location of the…

Collaborative memory in a serial combination procedure.

PubMed

Ditta, Annie Stanfield; Steyvers, Mark

2013-01-01

This article describes a new approach for studying collaborative memory that examines people's editing processes for naturally occurring memory errors. In this approach, memories of individuals are combined via a chaining method in which each participant indirectly receives information from the previous participant. Participants were asked to individually study word lists and recall as many words as possible in an online setting. Once a participant completed the recall task, his/her answers were provided for the next participant as suggested answers for their own recall. However, that participant was allowed to add or subtract words from the provided list of suggested answers. The final answer of the group was an aggregate of recalled words based on the answer given by the last participant in the chain. Results showed that participants displayed a very high accuracy of recall throughout the chain, although they were not able to replicate the entire study list or eliminate all errors by the end of the chain. This procedure has the advantage that it allows examination of the memory-editing processes individuals utilise when they communicate information indirectly, independent from social factors that arise in face-to-face group memory settings.

Astrium Technological Roadmaps for the Next Generation of Launchers Challenges

NASA Astrophysics Data System (ADS)

Larnac, Guy

2014-06-01

Main requirement on Ariane 6 are robustness, overall ownership cost and environmental impacts. To be able to meet these requirements it's mandatory to modify our usual way of working and to think the development and qualification of technologies differently. Airbus Defence and Space in the domain of materials, technologies and structures proposes a vision which address these points declined at different level:- Selection of key metallic and composite technologies to reduce drastically the cost of manufacturing,- Implementation of robust and economical way of assembly, promoting adhesive bonding and innovative technologies- Introducing virtual testing approach coupled with advanced methods and process simulation- Introduction of in-line monitoring to reduce cost of control- Implementation of the design for environment methodology with life cycle analysis to support the choice of technologies and materials- Development of EADS common materials to get benefice of aeronautic supply chain and communalitiesTo be efficient it seems evident and mandatory to develop all these approaches in an integrated and coordinated way. Advanced technologies and methodologies are supported by a strong network of collaboration enabling the integration of upstream ideas and concepts. This network is not only focused on low TRL level. Within EADS divisions intensive collaboration is deployed in order to get synergies. On the other side it's also mandatory for reliability and obsolescence issues to take care and master the supply chain.Additive layer manufacturing and thermoplastic based composite are directly concerned by this problematic. We present how, in the domain of materials and structures, aeronautic materials are considered first and how the mechanism of common qualification shared within EADS is now developed.This vision is being implemented within Airbus Defence and Space, described and reported through roadmaps. These roadmaps are the core of Airbus defence and Space strategies for the incoming years.

Chain Experiment competition inspires learning of physics

NASA Astrophysics Data System (ADS)

Dziob, Daniel; Górska, Urszula; Kołodziej, Tomasz

2017-05-01

The Chain Experiment is an annual competition which originated in Slovenia in 2005 and later expanded to Poland in 2013. For the purpose of the event, each participating team designs and builds a contraption that transports a small steel ball from one end to the other. At the same time the constructed machine needs to use a number of interesting phenomena and physics laws. In the competition’s finale, all contraptions are connected to each other to form a long chain transporting steel balls. In brief, they are all evaluated for qualities such as: creativity and advance in theoretical background, as well as the reliability of the constructed machine to work without human help. In this article, we present the contraptions developed by students taking part in the competition in order to demonstrate the advance in theoretical basis together with creativity in design and outstanding engineering skills of its participants. Furthermore, we situate the Chain Experiment in the context of other group competitions, at the same time demonstrating that—besides activating numerous group work skills—it also improves the ability to think critically and present one’s knowledge to a broader audience. We discussed it in the context of problem based learning, gamification and collaborative testing.

Designing The Navy Enlisted Supply Chain Inter Organizational Collaborative Capacity Assessment

DTIC Science & Technology

2016-03-01

the presence or adequacy of the human and financial resources dedicated to supporting an organization’s training with other organizations (p. 8). j...people understanding how their stovepipe impacts others” exhibit an empathy among respondents and an acknowledgement of shared incentive and reward...organizations at work is important to career advancement. COLLABORATIVE LEARNING ORIGINAL QUESTION SUGGESTED ACTION “My organization commits adequate human

Negotiation-based Order Lot-Sizing Approach for Two-tier Supply Chain

NASA Astrophysics Data System (ADS)

Chao, Yuan; Lin, Hao Wen; Chen, Xili; Murata, Tomohiro

This paper focuses on a negotiation based collaborative planning process for the determination of order lot-size over multi-period planning, and confined to a two-tier supply chain scenario. The aim is to study how negotiation based planning processes would be used to refine locally preferred ordering patterns, which would consequently affect the overall performance of the supply chain in terms of costs and service level. Minimal information exchanges in the form of mathematical models are suggested to represent the local preferences and used to support the negotiation processes.

Development of STEP-NC Adaptor for Advanced Web Manufacturing System

NASA Astrophysics Data System (ADS)

Ajay Konapala, Mr.; Koona, Ramji, Dr.

2017-08-01

Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

BIM-Based E-Procurement: An Innovative Approach to Construction E-Procurement

PubMed Central

2015-01-01

This paper presents an innovative approach to e-procurement in construction, which uses building information models (BIM) to support the construction procurement process. The result is an integrated and electronic instrument connected to a rich knowledge base capable of advanced operations and able to strengthen transaction relationships and collaboration throughout the supply chain. The BIM-based e-procurement prototype has been developed using distinct existing electronic solutions and an IFC server and was tested in a pilot case study, which supported further discussions of the results of the research. PMID:26090518

Changing the paradigm for marine data production, dissemination and validation with Collaborative Platforms. The GlobColour webservice, a prime example which leads to the integration of CWE technologies to build-up virtual research centres.

NASA Astrophysics Data System (ADS)

Fanton d'Andon, Odile; Martin-Lauzer, François-Regis; Mangin, Antoine; Barrot, Gilbert; Clouaire, Stephane; Sardou, Olivier; Demaria, Julien; Serra, Romain

2015-04-01

The GlobColour webservice provides a rich dataset of marine bio-geochemical information for research and education purposes. We report on recent evolutions to improve the functionalities of the service to access EO and in-situ data and check information quality. In addition, a new concept, the Collaborative Platform, support the processing of bespoke information for remote users. At the root of the service is an integrated and automated production chain, processing not only EO satellite data but also in-situ measurements from bio-Argo floats. This production chain provides daily updated bio-geochemical data and performs automated data analysis (merging of sensors, temporal and spatial binning). The GlobColour webservice has been recently upgraded to provide improved navigation and selection capabilities. These evolutions were necessary as the catalogue of EO products has been significantly increased, with many new parameters, new spatial resolution (1 km over Europe in addition to 4 km global products) and projections (rectangular grid in addition to sinus grid). The validation and quality control of the information is essential to demonstrate the fitness-for-purpose of the service. Match-ups between in-situ measurements and EO data are a key element to establish the validity of the information. The standard approach is to perform these match-ups off-line using a database of in-situ measurements, and report the results in a validation document. Two innovations are introduced which greatly increase the value for the user: • An interactive navigation tool allows a detailed analysis the results of the match-ups, with temporal and geographical selection capabilities. Background information for each match-up can be easily retrieved, both for in-situ (measurement identification) and for satellite data (context retrieval, providing information such as cloud coverage and spatial variability). This allows users to get a better insight into the validity of the retrieved data for their particular applications. • Match-ups using real-time EO data and data collected from bio-Argo floats are processed automatically on-the-fly. • This is possible because quality control of the bio-Argo float data is also automated. A dedicated interface has been set-up to monitor the whole fleet of Bio-Argo floats, and access detailed information from each acquired profile. Finally, a Collaborative Platform has been developed to support R&D activities in parallel to the standard production chain, enabling users to work remotely within a dedicated production environment in order to develop new algorithms and methods. The Collaborative Platform is based on a Collaborative Working Environment, a secured IT environment mixing hardware and software elements. It provides access to raw data, to processing and storage facilities, to specific applicative software (e.g. visualisation and post-processing tools). In addition, collaborative tools to exchange data, information and ideas between participants (through forums, web-conferencing…) contribute to create a "Virtual Research Centre" preparing future evolutions of the service. Acknowledgements: This research received funding from the following projects: • MCGS project funded by the Fonds Unique Interministériel, French regional funds PACA and Bretagne, the Fonds Européen de Développement Régional • FP7 Copernicus projects OSS2015 (grant n° 282723) and E-AIMS (grant n° 312642). • The French EQUIPEX project NAOS

Development opportunities for hospital clinical laboratory joint ventures.

PubMed

Van Riper, J A

1995-01-01

Regional health-care providers are being given the opportunity to collaborate in specialty health-care services. Collaboration to achieve superior economies of scale is very effective in the clinical laboratory industry. National laboratory chains are consolidating and enhancing their control of the industry to ensure their historic profitability. National companies have closed many laboratory facilities and have laid off substantial numbers of laboratory personnel. Health-care providers can regain control of their locally generated laboratory health-care dollars by joining forces with clinical laboratory joint ventures. Laboratorians can assist the healthcare providers in bringing laboratory services and employment back to the local community. New capital for operational development and laboratory information systems will help bring the laboratory to the point of care. The independent regional laboratory is focused on supporting the medical needs of the community. The profit generated from a laboratory joint venture is shared among local health-care providers, supporting their economic viability. The laboratories' ability to contribute to the development of profit-making ventures will provide capital for new laboratory development. All of the above will ensure the clinical laboratories' role in providing quality health care to our communities and employment opportunities for laboratory personnel.

A Framework of Multi Objectives Negotiation for Dynamic Supply Chain Model

NASA Astrophysics Data System (ADS)

Chai, Jia Yee; Sakaguchi, Tatsuhiko; Shirase, Keiichi

Trends of globalization and advances in Information Technology (IT) have created opportunity in collaborative manufacturing across national borders. A dynamic supply chain utilizes these advances to enable more flexibility in business cooperation. This research proposes a concurrent decision making framework for a three echelons dynamic supply chain model. The dynamic supply chain is formed by autonomous negotiation among agents based on multi agents approach. Instead of generating negotiation aspects (such as amount, price and due date) arbitrary, this framework proposes to utilize the information available at operational level of an organization in order to generate realistic negotiation aspect. The effectiveness of the proposed model is demonstrated by various case studies.

The Complexities of Implementing Cluster Supply Chain - Case Study of JCH

NASA Astrophysics Data System (ADS)

Xue, Xiao; Zhang, Jibiao; Wang, Yang

As a new type of management pattern, "cluster supply chain" (CSC) can help SMEs to face the global challenges through all kinds of collaboration. However, a major challenge in implementing CSC is the gap between theory and practice in the field. In an effort to provide a better understanding of this emerging phenomenon, this paper presents the implementation process of CSC in the context of JingCheng Mechanical & Electrical Holding co., ltd.(JCH) as a case study. The cast study of JCH suggests that the key problems in the practice of cluster supply chain: How do small firms use cluster supply chain? Only after we clarify the problem, the actual construction and operation of cluster supply chain does show successful results as it should be.

DNA ELECTROPHORESIS AT SURFACES

DOE Office of Scientific and Technical Information (OSTI.GOV)

RAFAILOVICH, MIRIAM; SOKOLOV, JONATHAN; GERSAPPE, DILIP

2003-09-01

During this year we performed two major projects: I. We developed a detailed theoretical model which complements our experiments on surface DNA electrophoresis. We found that it was possible to enhance the separation of DNA chains by imposing a chemical nanoscale pattern on the surface. This approach utilized the surface interaction effect of the DNA chains with the substrate and is a refinement to our previous method in which DNA chains were separated on homogeneous flat surfaces. By introducing the nano-patterns on the surface, the conformational changes of DNA chains of different lengths can be amplified, which results in themore » different friction strengths with the substrate surface. Our results also show that, when compared to the DNA electrophoresis performed on homogeneous flat surfaces, nanopatterned surfaces offer a larger window in choosing different surface interactions to achieve separation. II. In collaboration with a large international manufacturer of skin care products we also embarked on a project involving photo toxicity of titanium dioxide nanoparticles, which are a key ingredient in sunscreen and cosmetic lotions. The results clearly implicated the nanoparticles in catalyzing damage to chromosomal DNA. We then used this knowledge to develop a polymer/anti-oxidant coating which prevented the photocatalytic reaction on DNA while still retaining the UV absorptive properties of the nanoparticles. The standard gel electrophoresis was not sufficient in determining the extent of the DNA damage. The conclusions of this study were based predominantly on analysis obtained with the surface electrophoresis method.« less

Hydrolysis and Radiation Chemistry of the DGAs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mincher, Bruce Jay; Zarzana, Christopher Andrew

This document was prepared to meet FCR&D level 3 milestone M3FT-16IN030104052, “continue the study of the short chain compounds,” and, “ study the radiolysis of the non-symmetrical DGA (D3DODGA)….,” under the Radiation Chemistry FCR&D work package. Toward these goals, the short chain DGA, tetraethyldiglycolamide (TEDGA) was investigated for its hydrolytic stability in HNO3 solution, with comparisons to the less oxidizing mineral acid HCl. Initial gamma-irradiations were also performed on DGA solutions, to inform a more detailed investigation of several short chain compounds anticipated for FY17. The hydrolytic and radiolysis behavior of TEDGA is of interest for two reasons. First, previousmore » long chain DGA radiolysis was conducted in dodecane solution since the long chain compounds are soluble in that diluent, and new radiation chemistry is expected in the aqueous environment due to reactions with •OH radical. The second reason is that this water-soluble DGA has been proposed for use as a stripping or holdback agent in both European and American fuel cycle scenarios. Therefore, this work was performed in collaboration Forschungszentrum Jülich (FZJ), and the European SACSESS program. Additionally, results are presented here regarding the radiation of chemistry the non-symmetrical DGA didodecyldioctyldiglycolamide (D3DODGA), for comparison to previous work with symmetrical DGAs such as TODGA and TEHDGA. This was also conducted in collaboration with researchers in the SACSESS program.« less

Insights from Hydrogen Refueling Station Manufacturing Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayyas, Ahmad

2015-12-18

In work for the Clean Energy Manufacturing Analysis Center (CEMAC), NREL is currently collaborating with Great Lakes Wind Network in conducting a comprehensive hydrogen refueling stations manufacturing competitiveness and supply chain analyses. In this project, CEMAC will be looking at several metrics that will facilitate understanding of the interactions between and within the HRS supply chain, such metrics include innovation potential, intellectual properties, learning curves, related industries and clustering, existing supply chains, ease of doing business, and regulations and safety. This presentation to Fuel Cell Seminar and Energy Exposition 2015 highlights initial findings from CEMAC's analysis.

Making products available among community health workers: Evidence for improving community health supply chains from Ethiopia, Malawi, and Rwanda

PubMed Central

Chandani, Yasmin; Andersson, Sarah; Heaton, Alexis; Noel, Megan; Shieshia, Mildred; Mwirotsi, Amanda; Krudwig, Kirstin; Nsona, Humphreys; Felling, Barbara

2014-01-01

Background A UNICEF review of the challenges to scaling up integrated community case management (iCCM) found that drug shortages were a common bottleneck. In many settings, little thought has gone into the design of supply chains to the community level and limited evidence exists for how to address these unique challenges. SC4CCM’s purpose was to conduct intervention research to identify proven, simple, affordable solutions that address the unique supply chain challenges faced by CHWs and to demonstrate that supply chain constraints at the community level can be overcome. Methods SC4CCM selected three countries to implement supply chain innovations and developed a theory of change (TOC) framework for the learning phase, which identified the main drivers of product availability and was used for baseline assessments, design, implementation and evaluation of interventions in Ethiopia, Malawi, and Rwanda. Interventions were developed in each country and tested over 12–24 months. Mixed–method follow up assessments were conducted in each country in 2012–2013. The Supply Chain for Community Case Management (SC4CCM) Project then simplified the TOC into a Community Health Supply Chain (CHSC) framework to enable cross country analysis Results The findings from interventions in the three countries suggest that the greatest supply chain benefits are realized when all three CHSC framework elements (data flow, product flow, and effective people) are in place and working together. The synergistic effect of these three elements on supply chain performance was most effectively demonstrated by results from the Enhanced Management and Quality Collaborative interventions in Malawi and Rwanda, respectively, which were characterized by lower mean stockout rates and higher in stock rates on day of visit, when compared to other interventions. Conclusions Many conditions are necessary to ensure continuous product availability at the community level, however a supply chain works best when three key elements (product flow, data flow, and effective people) are deliberately included as an integral part of the system design. Although these elements may be designed differently in different settings, streamlining and synchronizing them while ensuring inclusion of all components for each element improves supply chain performance and promotes product availability at the community level. PMID:25520795

Managing challenges of import safety in a global market.

DOT National Transportation Integrated Search

2012-06-01

This collaborative will examine market, regulatory, and hybrid approaches to managing risk from deliberate or unintentional contamination in : imported commodity products from the global supply chain, through research and on-campus activities involvi...

Estimating a WTP-based value of a QALY: the 'chained' approach.

PubMed

Robinson, Angela; Gyrd-Hansen, Dorte; Bacon, Philomena; Baker, Rachel; Pennington, Mark; Donaldson, Cam

2013-09-01

A major issue in health economic evaluation is that of the value to place on a quality adjusted life year (QALY), commonly used as a measure of health care effectiveness across Europe. This critical policy issue is reflected in the growing interest across Europe in development of more sound methods to elicit such a value. EuroVaQ was a collaboration of researchers from 9 European countries, the main aim being to develop more robust methods to determine the monetary value of a QALY based on surveys of the general public. The 'chained' approach of deriving a societal willingness-to-pay (WTP) based monetary value of a QALY used the following basic procedure. First, utility values were elicited for health states using the standard gamble (SG) and time trade off (TTO) methods. Second, a monetary value to avoid some risk/duration of that health state was elicited and the implied WTP per QALY estimated. We developed within EuroVaQ an adaptation to the 'chained approach' that attempts to overcome problems documented previously (in particular the tendency to arrive at exceedingly high WTP per QALY values). The survey was administered via Internet panels in each participating country and almost 22,000 responses achieved. Estimates of the value of a QALY varied across question and were, if anything, on the low side with the (trimmed) 'all country' mean WTP per QALY ranging from $18,247 to $34,097. Untrimmed means were considerably higher and medians considerably lower in each case. We conclude that the adaptation to the chained approach described here is a potentially useful technique for estimating WTP per QALY. A number of methodological challenges do still exist, however, and there is scope for further refinement. Copyright © 2013 Elsevier Ltd. All rights reserved.

Developing a Cloud-Based Online Geospatial Information Sharing and Geoprocessing Platform to Facilitate Collaborative Education and Research

NASA Astrophysics Data System (ADS)

Yang, Z. L.; Cao, J.; Hu, K.; Gui, Z. P.; Wu, H. Y.; You, L.

2016-06-01

Efficient online discovering and applying geospatial information resources (GIRs) is critical in Earth Science domain as while for cross-disciplinary applications. However, to achieve it is challenging due to the heterogeneity, complexity and privacy of online GIRs. In this article, GeoSquare, a collaborative online geospatial information sharing and geoprocessing platform, was developed to tackle this problem. Specifically, (1) GIRs registration and multi-view query functions allow users to publish and discover GIRs more effectively. (2) Online geoprocessing and real-time execution status checking help users process data and conduct analysis without pre-installation of cumbersome professional tools on their own machines. (3) A service chain orchestration function enables domain experts to contribute and share their domain knowledge with community members through workflow modeling. (4) User inventory management allows registered users to collect and manage their own GIRs, monitor their execution status, and track their own geoprocessing histories. Besides, to enhance the flexibility and capacity of GeoSquare, distributed storage and cloud computing technologies are employed. To support interactive teaching and training, GeoSquare adopts the rich internet application (RIA) technology to create user-friendly graphical user interface (GUI). Results show that GeoSquare can integrate and foster collaboration between dispersed GIRs, computing resources and people. Subsequently, educators and researchers can share and exchange resources in an efficient and harmonious way.

Macroergomonics' contribution to the effectiveness of collaborative supply chains.

PubMed

Herrera, Sandra Mejias; Huatuco, Luisa Huaccho

2012-01-01

This article presents a conceptual model that combines Macroergonomics and Supply chain. The authors combine their expertise on these individual topics, building on their previous research. The argument of the paper is that human factors are key to achieve effective supplier-customer collaboration. A conceptual model is presented, its elements and their interactions are explained. The Content-Context-Process is applied as a departing point to this model. Macroergonomics aspects considered are: a systemic approach, participatory ergonomics, formation of ergonomics teams and evaluation of ergonomics projects. The expected outcomes are: (a) improvement of production and productivity levels, (b) improvement of the product quality, (c) Reduction of absenteeism, (d) Improvement in the quality of work life (from the employees' perspective), and (e) increase in the employees' contribution rate of ideas for improvement. A case study was carried out at a vitroplant production organisation incorporating environmental aspects to obtain sustainable benefits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoogcarspel, S; Kerkmeijer, L; Lagendijk, J

The Alderson phantom is a human shaped quality assurance tool that has been used for over 30 years in radiotherapy. The phantom can provide integrated tests of the entire chain of treatment planning and delivery. The purpose of this research was to investigate if this phantom can be used to chain test a treatment on the MRI linear accelerator (MRL) which is currently being developed at the UMC Utrecht, in collaboration with Elekta and Philips. The latter was demonstrated by chain testing the future First-in-Man treatments with this system.An Alderson phantom was used to chain test an entire treatment withmore » the MRL. First, a CT was acquired of the phantom with additional markers that are both visible on MR and CT. A treatment plan for treating bone metastases in the sacrum was made. The phantom was consecutively placed in the MRL. For MRI imaging, an 3D volume was acquired. The initially developed treatment plan was then simulated on the new MRI dataset. For simulation, both the MR and CT data was used by registering them together. Before treatment delivery a MV image was acquired and compared with a DRR that was calculated form the MR/CT registration data. Finally, the treatment was delivered. Figure 1 shows both the T1 weighted MR-image of the phantom and the CT that was registered to the MR image. Figure 2 shows both the calculated and measured MV image that was acquired by the MV panel. Figure 3 shows the dose distribution that was simulated. The total elapsed time for the entire procedure excluding irradiation was 13:35 minutes.The Alderson Phantom yields sufficient MR contrast and can be used for full MR guided radiotherapy treatment chain testing. As a result, we are able to perform an end-to-end chain test of the future First-in-Man treatments.« less

An Identity Based Key Exchange Protocol in Cloud Computing

NASA Astrophysics Data System (ADS)

Molli, Venkateswara Rao; Tiwary, Omkar Nath

2012-10-01

Workflow systems often use delegation to enhance the flexibility of authorization; delegation transfers privileges among users across different administrative domains and facilitates information sharing. We present an independently verifiable delegation mechanism, where a delegation credential can be verified without the participation of domain administrators. This protocol, called role-based cascaded delegation (RBCD), supports simple and efficient cross-domain delegation of authority. RBCD enables a role member to create delegations based on the dynamic needs of collaboration; in the meantime, a delegation chain canbe verified by anyone without the participation of role administrators. We also propose the Measurable Risk Adaptive decentralized Role-based Delegation framework to address this problem. Describe an efficient realization of RBCD by using aggregate signatures, where the authentication information for an arbitrarily long role-based delegation chain is captured by one short signature of constant size. RBCD enables a role member to create delegations based on the need of collaboration; in the meantime anyone can verify a delegation chain without the participation of role administrators. The protocol is general and can be realized by any signature scheme. We have described a specific realization with a hierarchical certificate-based encryption scheme that gives delegation compact credentials.

Disconnection: the user voice within the wound dressing supply chain.

PubMed

Campling, Natasha; Grocott, Patricia; Cowley, Sarah

2008-03-01

This study examined the user voice in England's National Health Service (NHS) wound dressing supply chain. The impetus for this work came from involvement in a collaboration between industry and clinicians, entitled Woundcare Research for Appropriate Products. Experiences from that study highlighted the notable absence of research about the impact of the supply chain on the users of dressings. Interview data are presented following an outline of the grounded theory method used. These data were obtained from key stakeholders (n = 41) within the wound dressing supply chain such as nurses, manufacturers, distributors, professional organizations, government organizations and user groups. The consequences of supply disconnection revealed haphazard supply, unmet user needs and lack of information transfer between player groups. These consequences explain the lack of user voice in the supply chain and have far-reaching implications for nursing management, through purchasing decisions and nurses' management of wound care.

[Blood donor hemovigilance: impact for donor and recipient safety].

PubMed

Hauser, L; Beyloune, A; Simonet, M; Bierling, P

2013-05-01

Since its creation in 1993, hemovigilance has an important place for blood safety. The part concerning donors, as the name suggests, targeted on improvement of donor's safety covers in fact the two points of the transfusion chain with serious adverse events in donor, epidemiologic survey for recipients and post-donation information on the two sides. Organized management and close collaboration between the actors of the transfusion chain are necessary to ensure the effectiveness of the system. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

The IASI detection chain

NASA Astrophysics Data System (ADS)

Nicol, Patrick; Fleury, Joel; Le Naour, Claire; Bernard, Frédéric

2017-11-01

IASI (Infrared Atmospheric Sounding Interferometer) is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The presentation will describe the spectrometer detection chain architecture, composed by three different detectors cooled in a passive cryo-cooler (so called CBS : Cold Box Subsystem) and associated analog electronics up to digital conversion. It will mainly focus on design choices with regards to environment constraints, implemented technologies, and associated performances. CNES is leading the IASI program in collaboration with EUMETSAT. The instrument Prime is ALCATEL SPACE responsible, notably, of the detection chain architecture. SAGEM SA provides the detector package (so called CAU : Cold Acquisition Unit).

The IASI detection chain

NASA Astrophysics Data System (ADS)

Nicol, Patrick; Fleury, Joel; Bernard, Frédéric

2004-06-01

IASI (Infrared Atmospheric Sounding Interferometer) is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The presentation will describe the spectrometer detection chain architecture, composed by three different detectors cooled in a passive cryo-cooler (so called CBS : Cold Box Subsystem) and associated analog electronics up to digital conversion. It will mainly focus on design choices with regards to environment constraints, implemented technologies, and associated performances . CNES is leading the IASI program in collaboration with EUMETSAT. The instrument Prime is ALCATEL SPACE responsible, notably, of the detection chain architecture. SAGEM SA provides the detector package (so called CAU: Cold Acquisition Unit).

Proactive Supply Chain Performance Management with Predictive Analytics

PubMed Central

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment. PMID:25386605

Proactive supply chain performance management with predictive analytics.

PubMed

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.

The roles of information technology in global chain supply: a multiple case study of multinational companies of China

NASA Astrophysics Data System (ADS)

He, Mao; Duan, Wanchun

2007-12-01

Nowadays many Chinese companies have being becoming more and more international. Therefore, these Chinese companies have to face global supply chains rather than the former domestic ones. The use of information technology (IT) is considered a prerequisite for the effective control of today's complex global supply chains. Based on empirical data from 10 multinational companies of China, this paper presents a classification of the ways in which companies use IT in SCM, and examines the drivers for these different utilization types. According to the findings of this research, the purposes of using of IT in SCM can be divided into 1) transaction processing, 2) supply chain planning and collaboration, and 3) order tracking and delivery coordination. The findings further suggest that the drivers between these three uses of IT in SCM differ.

Requirement analysis for the one-stop logistics management of fresh agricultural products

NASA Astrophysics Data System (ADS)

Li, Jun; Gao, Hongmei; Liu, Yuchuan

2017-08-01

Issues and concerns for food safety, agro-processing, and the environmental and ecological impact of food production have been attracted many research interests. Traceability and logistics management of fresh agricultural products is faced with the technological challenges including food product label and identification, activity/process characterization, information systems for the supply chain, i.e., from farm to table. Application of one-stop logistics service focuses on the whole supply chain process integration for fresh agricultural products is studied. A collaborative research project for the supply and logistics of fresh agricultural products in Tianjin was performed. Requirement analysis for the one-stop logistics management information system is studied. The model-driven business transformation, an approach uses formal models to explicitly define the structure and behavior of a business, is applied for the review and analysis process. Specific requirements for the logistic management solutions are proposed. Development of this research is crucial for the solution of one-stop logistics management information system integration platform for fresh agricultural products.

Novel Low Cost, High Reliability Wind Turbine Drivetrain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chobot, Anthony; Das, Debarshi; Mayer, Tyler

2012-09-13

Clipper Windpower, in collaboration with United Technologies Research Center, the National Renewable Energy Laboratory, and Hamilton Sundstrand Corporation, developed a low-cost, deflection-compliant, reliable, and serviceable chain drive speed increaser. This chain and sprocket drivetrain design offers significant breakthroughs in the areas of cost and serviceability and addresses the key challenges of current geared and direct-drive systems. The use of gearboxes has proven to be challenging; the large torques and bending loads associated with use in large multi-MW wind applications have generally limited demonstrated lifetime to 8-10 years [1]. The large cost of gearbox replacement and the required use of large,more » expensive cranes can result in gearbox replacement costs on the order of $1M, representing a significant impact to overall cost of energy (COE). Direct-drive machines eliminate the gearbox, thereby targeting increased reliability and reduced life-cycle cost. However, the slow rotational speeds require very large and costly generators, which also typically have an undesirable dependence on expensive rare-earth magnet materials and large structural penalties for precise air gap control. The cost of rare-earth materials has increased 20X in the last 8 years representing a key risk to ever realizing the promised cost of energy reductions from direct-drive generators. A common challenge to both geared and direct drive architectures is a limited ability to manage input shaft deflections. The proposed Clipper drivetrain is deflection-compliant, insulating later drivetrain stages and generators from off-axis loads. The system is modular, allowing for all key parts to be removed and replaced without the use of a high capacity crane. Finally, the technology modularity allows for scalability and many possible drivetrain topologies. These benefits enable reductions in drivetrain capital cost by 10.0%, levelized replacement and O&M costs by 26.7%, and overall cost of energy by 10.2%. This design was achieved by: (1) performing an extensive optimization study that deter-mined the preliminary cost for all practical chain drive topologies to ensure the most competitive configuration; (2) conducting detailed analysis of chain dynamics, contact stresses, and wear and efficiency characteristics over the chain's life to ensure accurate physics-based predictions of chain performance; and (3) developing a final product design, including reliability analysis, chain replacement procedures, and bearing and sprocket analysis. Definition of this final product configuration was used to develop refined cost of energy estimates. Finally, key system risks for the chain drive were defined and a comprehensive risk reduction plan was created for execution in Phase 2.« less

Emerging CAE technologies and their role in Future Ambient Intelligence Environments

NASA Astrophysics Data System (ADS)

Noor, Ahmed K.

2011-03-01

Dramatic improvements are on the horizon in Computer Aided Engineering (CAE) and various simulation technologies. The improvements are due, in part, to the developments in a number of leading-edge technologies and their synergistic combinations/convergence. The technologies include ubiquitous, cloud, and petascale computing; ultra high-bandwidth networks, pervasive wireless communication; knowledge based engineering; networked immersive virtual environments and virtual worlds; novel human-computer interfaces; and powerful game engines and facilities. This paper describes the frontiers and emerging simulation technologies, and their role in the future virtual product creation and learning/training environments. The environments will be ambient intelligence environments, incorporating a synergistic combination of novel agent-supported visual simulations (with cognitive learning and understanding abilities); immersive 3D virtual world facilities; development chain management systems and facilities (incorporating a synergistic combination of intelligent engineering and management tools); nontraditional methods; intelligent, multimodal and human-like interfaces; and mobile wireless devices. The Virtual product creation environment will significantly enhance the productivity and will stimulate creativity and innovation in future global virtual collaborative enterprises. The facilities in the learning/training environment will provide timely, engaging, personalized/collaborative and tailored visual learning.

A framework using cluster-based hybrid network architecture for collaborative virtual surgery.

PubMed

Qin, Jing; Choi, Kup-Sze; Poon, Wai-Sang; Heng, Pheng-Ann

2009-12-01

Research on collaborative virtual environments (CVEs) opens the opportunity for simulating the cooperative work in surgical operations. It is however a challenging task to implement a high performance collaborative surgical simulation system because of the difficulty in maintaining state consistency with minimum network latencies, especially when sophisticated deformable models and haptics are involved. In this paper, an integrated framework using cluster-based hybrid network architecture is proposed to support collaborative virtual surgery. Multicast transmission is employed to transmit updated information among participants in order to reduce network latencies, while system consistency is maintained by an administrative server. Reliable multicast is implemented using distributed message acknowledgment based on cluster cooperation and sliding window technique. The robustness of the framework is guaranteed by the failure detection chain which enables smooth transition when participants join and leave the collaboration, including normal and involuntary leaving. Communication overhead is further reduced by implementing a number of management approaches such as computational policies and collaborative mechanisms. The feasibility of the proposed framework is demonstrated by successfully extending an existing standalone orthopedic surgery trainer into a collaborative simulation system. A series of experiments have been conducted to evaluate the system performance. The results demonstrate that the proposed framework is capable of supporting collaborative surgical simulation.

The Collaborative Ocular Tuberculosis Study (COTS)-1 Report 3: Polymerase Chain Reaction in the Diagnosis and Management of Tubercular Uveitis: Global Trends.

PubMed

Agarwal, Aniruddha; Agrawal, Rupesh; Gunasekaran, Dinesh Visva; Raje, Dhananjay; Gupta, Bhaskar; Aggarwal, Kanika; Murthy, Somasheila L; Westcott, Mark; Chee, Soon Phaik; Mccluskey, Peter; Su Ling, Ho; Teoh, Stephen; Cimino, Luca; Biswas, Jyotirmay; Narain, Shishir; Agarwal, Manisha; Mahendradas, Padmamalini; Khairallah, Moncef; Jones, Nicholas; Tugal-Tutkun, Ilknur; Babu, Kalpana; Basu, Soumayava; Carreño, Ester; Lee, Richard; Al-Dhibi, Hassan; Bodaghi, Bahram; Invernizzi, Alessandro; Goldstein, Debra A; Herbort, Carl P; Barisani-Asenbauer, Talin; González-López, Julio J; Androudi, Sofia; Bansal, Reema; Moharana, Bruttendu; Mahajan, Sarakshi; Esposti, Simona; Tasiopoulou, Anastasia; Nadarajah, Sengal; Agarwal, Mamta; Abraham, Sharanya; Vala, Ruchi; Singh, Ramandeep; Sharma, Aman; Sharma, Kusum; Zierhut, Manfred; Kon, Onn Min; Cunningham, Emmett; Nguyen, Quan Dong; Pavesio, Carlos; Gupta, Vishali

2017-12-20

To analyze the role of polymerase chain reaction (PCR) of ocular fluids in management of tubercular (TB) anterior, intermediate, posterior, and panuveitis. In Collaborative Ocular Tuberculosis Study (COTS)-1 (25 centers, n = 962), patients with TB-related uveitis were included. 59 patients undergoing PCR of intraocular fluids (18 females; 53 Asian Indians) were included. 59 (6.13%) of COTS-1 underwent PCR analysis. PCR was positive for Mycobacterium TB in 33 patients (23 males; all Asian Indians). 26 patients were PCR negative (18 males). Eight patients with negative PCR had systemic TB. Anti-TB therapy was given in 18 negative and 31 PCR cases. At 1-year follow-up, five patients with positive PCR (15.15%) and three with negative PCR (11.54%) had persistence/worsening of inflammation. Data from COTS-1 suggest that PCR is not commonly done for diagnosing intraocular TB and positive/negative results may not influence management or treatment outcomes in the real world scenario.

Learning Geomatics for Restoration: Icomos Summer School in Ossola Valley

NASA Astrophysics Data System (ADS)

Achille, C.; Fassi, F.; Marquardt, K.; Cesprini, M.

2017-05-01

Documentation and preservation of widespread rural heritage are today possible only if you can activate processes of conservation headed by local communities, thereby recognizing the link between the communities and their culture. The cultural heritage places (villages, sites and landscapes) can take different values; action is needed respecting the right of communities to identify the values contained in them. `Collaborative networks should be set up at different levels among multiple stakeholders in order to address issues related to heritage and create new value chains through innovative synergies. Dynamic, flexible, inclusive and integrated processes of engagement need to be employed for assessing long-term social impacts of heritage conservation programmes' (Icomos, 2014). In 2011 the 3DSurvey Group of the Politecnico di Milano in collaboration with the Canova Association initiated an annual summer school program entitled `Laboratory of Places 2017, Ghesc and surroundings, History, survey, evolution Laboratory of Places'. The definition of "Laboratory of Places 2017, Ghesc and surroundings" links the idea of an inhabited space to an open space suitable for study, research, and an interactive absorption and confrontation of differing ideas. Founding elements of the project involve educational collaborations with university, but equally important will be the development of programs with local schools, associations, and public administration (Quaderni di Ghesc, 2010).

An extreme events laboratory to provide network centric collaborative situation assessment and decision making

NASA Astrophysics Data System (ADS)

Panulla, Brian J.; More, Loretta D.; Shumaker, Wade R.; Jones, Michael D.; Hooper, Robert; Vernon, Jeffrey M.; Aungst, Stanley G.

2009-05-01

Rapid improvements in communications infrastructure and sophistication of commercial hand-held devices provide a major new source of information for assessing extreme situations such as environmental crises. In particular, ad hoc collections of humans can act as "soft sensors" to augment data collected by traditional sensors in a net-centric environment (in effect, "crowd-sourcing" observational data). A need exists to understand how to task such soft sensors, characterize their performance and fuse the data with traditional data sources. In order to quantitatively study such situations, as well as study distributed decision-making, we have developed an Extreme Events Laboratory (EEL) at The Pennsylvania State University. This facility provides a network-centric, collaborative situation assessment and decision-making capability by supporting experiments involving human observers, distributed decision making and cognition, and crisis management. The EEL spans the information chain from energy detection via sensors, human observations, signal and image processing, pattern recognition, statistical estimation, multi-sensor data fusion, visualization and analytics, and modeling and simulation. The EEL command center combines COTS and custom collaboration tools in innovative ways, providing capabilities such as geo-spatial visualization and dynamic mash-ups of multiple data sources. This paper describes the EEL and several on-going human-in-the-loop experiments aimed at understanding the new collective observation and analysis landscape.

An approach for formalising the supply chain operations

NASA Astrophysics Data System (ADS)

Zdravković, Milan; Panetto, Hervé; Trajanović, Miroslav; Aubry, Alexis

2011-11-01

Reference models play an important role in the knowledge management of the various complex collaboration domains (such as supply chain networks). However, they often show a lack of semantic precision and, they are sometimes incomplete. In this article, we present an approach to overcome semantic inconsistencies and incompleteness of the Supply Chain Operations Reference (SCOR) model and hence improve its usefulness and expand the application domain. First, we describe a literal web ontology language (OWL) specification of SCOR concepts (and related tools) built with the intention to preserve the original approach in the classification of process reference model entities, and hence enable the effectiveness of usage in original contexts. Next, we demonstrate the system for its exploitation, in specific - tools for SCOR framework browsing and rapid supply chain process configuration. Then, we describe the SCOR-Full ontology, its relations with relevant domain ontology and show how it can be exploited for improvement of SCOR ontological framework competence. Finally, we elaborate the potential impact of the presented approach, to interoperability of systems in supply chain networks.

The evolving role of supply chain management technology in healthcare.

PubMed

Langabeer, Jim

2005-01-01

The healthcare supply chain is a vast, disintegrated network of products and players, loosely held together by manual and people-intensive processes. Managing the flow of information, supplies, equipment, and services from manufacturers to distributors to providers of care is especially difficult in clinical supply chains, compared with more technology-intense industries like consumer goods or industrial manufacturing. As supplies move downstream towards hospitals and clinics, the quality and robustness of accompanying management and information systems used to manage these products deteriorates significantly. Technology that provides advanced planning, synchronization, and collaboration upstream at the large supply manufacturers and distributors rarely is used at even the world's larger and more sophisticated hospitals. This article outlines the current state of healthcare supply chain management technologies, addresses potential reasons for the lack of adoption of technologies and provides a roadmap for the evolution of technology for the future. This piece is based on both quantitative and qualitative research assessments of the healthcare supply chain conducted during the last two years.

Momentum Dependence of Charge Excitations in YBa2Cu3O7-δ and Nd2-xCexCuO4

NASA Astrophysics Data System (ADS)

Ishii, Kenji

2006-03-01

Resonant inelastic x-ray scattering (RIXS) studies at Cu K-edge on high-Tc superconducting cuprates, YBa2Cu3O7-δ and Nd2-xCexCuO4 are presented. The superconductivity occurs in the vicinity of the Mott insulating state and it is important to clarify the nature of the Mott gap and its doping dependence. Because RIXS has an advantage that we can measure charge excitation in a wide energy-momentum space, it gives a unique opportunity to study the electronic structure of materials. We apply this technique to high-Tc superconducting cuprates. In particular the electronic structure of strongly correlated metals is in the focus of our RIXS study. The experiments were performed at BL11XU of SPring-8, Japan, where a specially designed spectrometer for inelastic x-ray scattering is installed. In optimally doped YBa2Cu3O7-δ, anisotropic spectra are observed in the ab plane of a twin-free crystal. The Mott gap excitation from the one-dimensional CuO chain is enhanced at 2 eV near the zone boundary of the chain direction, while the excitation from the CuO2 plane is broad at 1.5-4 eV and almost independent of momentum. Theoretical calculation based on the one-dimensional and two-dimensional Hubbard model reproduces the observed features in the RIXS spectra when smaller values of the on-site Coulomb energy of the chain than that of the plane are assumed. This means that the charge transfer gap of the chain is smaller than that of the plane. On the other hand, both interband excitation across the Mott gap and intraband excitation in the upper Hubbard band are observed in the electron-doped Nd2-xCexCuO4. The intensity of the interband excitation is concentrated at ˜ 2 eV near the zone boundary while a dispersion relation with a momentum-dependent width emerges in the intraband excitation. The author would like to acknowledge to his collaborators, K. Tsutsui, Y. Endoh, T. Tohyama, K. Kuzushita, T. Inami, K. Ohwada, M. Hoesch, M. Tsubota, Y. Murakami, J. Mizuki, S. Maekawa, T. Masui, S. Tajima, and K. Yamada. The crystal growth of YBa2Cu3O7-δ was supported by the New Energy and Industrial Technology Development Organization (NEDO) as the Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications.

Antibody modeling using the prediction of immunoglobulin structure (PIGS) web server [corrected].

PubMed

Marcatili, Paolo; Olimpieri, Pier Paolo; Chailyan, Anna; Tramontano, Anna

2014-12-01

Antibodies (or immunoglobulins) are crucial for defending organisms from pathogens, but they are also key players in many medical, diagnostic and biotechnological applications. The ability to predict their structure and the specific residues involved in antigen recognition has several useful applications in all of these areas. Over the years, we have developed or collaborated in developing a strategy that enables researchers to predict the 3D structure of antibodies with a very satisfactory accuracy. The strategy is completely automated and extremely fast, requiring only a few minutes (∼10 min on average) to build a structural model of an antibody. It is based on the concept of canonical structures of antibody loops and on our understanding of the way light and heavy chains pack together.

LINEAR POLYMER CHAIN AND BIOENGINEERED CHELATORS FOR METALS REMEDIATION

EPA Science Inventory

The 3-year GCHSRC grant of $150,000 levers financial assistance from the University ($94,500 match) as well as collaborative assistance from LANL and TCEQ in the project. Similarly, a related project supported by the Welch Foundation will likely contribute to the k...

75 FR 62837 - Cooperative Agreement To Support Building Global Capacity for the Surveillance and Monitoring of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... solutions through global collaboration and evidence-based approaches. C. Eligibility Information The.../Falsified Medicines and Supply Chain Threats AGENCY: Food and Drug Administration, HHS. ACTION: Notice... medicines and risks and breaches in the supply. FOR FURTHER INFORMATION AND ADDITIONAL REQUIREMENTS CONTACT...

Ernst Chain: a great man of science.

PubMed

Kardos, Nelson; Demain, Arnold L

2013-08-01

This paper is a tribute to the scientific accomplishments of Ernst Chain and the influence he exerted over the fields of industrial microbiology and biotechnology. Chain is the father of the modern antibiotic era and all the benefits that these therapeutic agents have brought, i.e., longer life spans, greater levels of public health, widespread modern surgery, and control of debilitating infectious diseases, including tuberculosis, gonorrhea, syphilis, etc. Penicillin was the first antibiotic to become commercially available, and its use ushered in the age of antibiotics. The discovery of penicillin's bactericidal action had been made by Alexander Fleming in London in 1928. After publishing his observations in 1929, no further progress was made until the work was picked up in 1939 by scientists at Oxford University. The group was headed by Howard Florey, and Chain was the group's lead scientist. Chain was born and educated in Germany, and he fled in 1933 as a Jewish refugee from Nazism to England. Other important members of the Oxford research team were Norman Heatley and Edward Abraham. The team was able to produce and isolate penicillin under conditions of scarce resources and many technical challenges. Sufficient material was collected and tested on mice to successfully demonstrate penicillin's bactericidal action on pathogens, while being nontoxic to mammals. Chain directed the microbiological methods for producing penicillin and the chemical engineering methods to extract the material. This technology was transferred to US government facilities in 1941 for commercial production of penicillin, becoming an important element in the Allied war effort. In 1945, the Nobel Prize for medicine was shared by Fleming, Florey, and Chain in recognition of their work in developing penicillin as a therapeutic agent. After World War II, Chain tried to persuade the British government to fund a new national antibiotic industry with both research and production facilities. As resources were scarce in postwar Britain, the British government declined the project. Chain then took a post in 1948 at Rome's Instituto Superiore di Sanitá, establishing a new biochemistry department with a pilot plant. During that period, his department developed important new antibiotics (including the first semisynthetic antibiotics) as well as improved technological processes to produce a wide variety of important microbial metabolites that are still in wide use today. Chain was also responsible for helping several countries to start up a modern penicillin industry following World War II, including the Soviet Union and the People's Republic of China. In 1964, Chain returned to England to establish a new biochemistry department and industrial scale fermentation pilot plant at Imperial College in London. Imperial College became the preeminent biochemical department in Europe. Chain was also a pioneer in changing the relationship between government, private universities, and private industry for collaboration and funding to support medical research. Ernst Chain has left a lasting impact as a great scientist and internationalist.

How sand grains stop a high speed intruder

NASA Astrophysics Data System (ADS)

Behringer, Robert

When a speeding intruder impacts on a granular material, it comes rapidly to rest after penetrating only a modest distance. Empirical dynamical models, dating to the 19th century (if not earlier), describe the drag on the intruder in terms of two types of depth-dependent forces: one a static force, which also includes gravity, and the other a collisional force proportional to the square of the instantaneous speed of the intruder. What processes occur in the material to so quickly decelerate the intruder? We address this question through experiments and simulations (work of Lou Kondic and collaborators). We first probe the granular response using quasi-two-dimensional granular materials consisting of photoelastic discs. When such a particle experiences a force, it appears bright under cross-polarized illumination. High speed video reveals dynamic force transmission into the material along force chains that form in response to the intruder motion. These chains are nearly normal to the intruder surface, implying that collisional rather than frictional forces dominate the momentum transfer from intruder to grains. These observations allow the formation of a collision-based model that correctly captures the collisional drag force for both 2D and 3D intruders of a variety of shapes. This talk will develop a collisional picture of impact, and also explore the change in the system response as the impact speed increases. Experimental collaborators include Abe Clark, Cacey Stevens Bester, and Alec Petersen. This work supported by DTRA, NSF Grant DMR1206351, NASA Grant NNX15AD38G, and the William M. Keck Foundation.

Chemistry, Creativity, Collaboration, and C60: An Interview with Harold W. Kroto

NASA Astrophysics Data System (ADS)

Cardellini, Liberato

2005-05-01

This interview offers a sketch of the story of Harold Kroto’s scientific life, highlighting his research activities and discoveries. Illustrative examples include Kroto's study of electronic spectra of molecules, the synthesis of phosphoalkenes and phosphoalkynes, the study of long carbon chain molecules in the lab, and the search for long carbon chain molecules in the interstellar medium while at Rice University that led to the serendipitous discovery of fullerene. Kroto defends and stresses the importance of fundamental research and the role of scientists in society; he also suggests a way to foster children's interest in science.

Collaborative Drug Therapy Management: Case Studies of Three Community-Based Models of Care

PubMed Central

Snyder, Margie E.; Earl, Tara R.; Greenberg, Michael; Heisler, Holly; Revels, Michelle; Matson-Koffman, Dyann

2015-01-01

Collaborative drug therapy management agreements are a strategy for expanding the role of pharmacists in team-based care with other providers. However, these agreements have not been widely implemented. This study describes the features of existing provider–pharmacist collaborative drug therapy management practices and identifies the facilitators and barriers to implementing such services in community settings. We conducted in-depth, qualitative interviews in 2012 in a federally qualified health center, an independent pharmacy, and a retail pharmacy chain. Facilitators included 1) ensuring pharmacists were adequately trained; 2) obtaining stakeholder (eg, physician) buy-in; and 3) leveraging academic partners. Barriers included 1) lack of pharmacist compensation; 2) hesitation among providers to trust pharmacists; 3) lack of time and resources; and 4) existing informal collaborations that resulted in reduced interest in formal agreements. The models described in this study could be used to strengthen clinical–community linkages through team-based care, particularly for chronic disease prevention and management. PMID:25811494

Enabling Tools and Methods for International, Inter-disciplinary and Educational Collaboration

NASA Astrophysics Data System (ADS)

Robinson, E. M.; Hoijarvi, K.; Falke, S.; Fialkowski, E.; Kieffer, M.; Husar, R. B.

2008-05-01

In the past, collaboration has taken place in tightly-knit workgroups where the members had direct connections to each other. Such collaboration was confined to small workgroups and person-to-person communication. Recent developments through the Internet foster virtual workgroups and organizations where dynamic, 'just-in-time' collaboration can take place over a much larger scale. The emergence of virtual workgroups has strongly influenced the interaction of inter-national, inter-disciplinary, as well as educational activities. In this paper we present an array of enabling tools and methods that incorporate the new technologies including web services, software mashups, tag-based structuring and searching, and wikis for collaborative writing and content organization. Large monolithic, 'do-it-all' software tools are giving way to web service modules, combined through service chaining. Application software can now be created using Service Oriented Architecture (SOA). In the air quality community, data providers and users are distributed in space and time creating barriers for data access. By exposing the data on the internet the space, time barriers are lessened. The federated data system, DataFed, developed at Washington University, accesses data from autonomous, distributed providers. Through data "wrappers", DataFed provides uniform and standards-based access services to heterogeneous, distributed data. Service orientation not only lowers the entry resistance for service providers, but it also allows the creation of user-defined applications and/or mashups. For example, Google Earth's open API allowed many groups to mash their content with Google Earth. Ad hoc tagging gives a rich description of the internet resources, but it has the disadvantage of providing a fuzzy schema. The semantic uniformity of the internet resources can be improved by controlled tagging which apply a consistent namespace and tag combinations to diverse objects. One example of this is the photo-sharing web application Flickr. Just like data, by exposing photos through the internet those can be reused in ways unknown and unanticipated by the provider. For air quality application, Flickr allowed a rich collection of images of forest fire smoke, wind blown dust and haze events to be tagged with controlled tags and used in for evaluating subtle features of the events. Wikis, originally used just for collaboratively writing and discuss documents, are now also a social software workflow managers. In air quality data, wikis provides the means to collaboratively create rich metadata. Wikis become a virtual meeting place to discuss ideas before a workshop of conference, display tagged internet resources, and collaboratively work on documents. Wikis are also useful in the classroom. For instance in class projects, the wiki displays harvested resources, maintains collaborative documents and discussions and is the organizational memory for the project.

Self-Identified Servant Leadership Traits Valued by Elementary Teachers in an Urban Wisconsin School District

ERIC Educational Resources Information Center

Thompson, Christopher S.

2014-01-01

Teachers exhibit leadership behaviors of a service nature in their collaborative work with fellow educators. When additional school staff follow the teacher's example by engaging in servant leadership behaviors, a chain-like reaction or virtuous effect may occur. The researcher hypothesized that significant levels of agreement for servant…

Collaborative ring trial of the papaya endogenous reference gene and its polymerase chain reaction assays for genetically modified organism analysis.

PubMed

Wei, Jiaojun; Li, Feiwu; Guo, Jinchao; Li, Xiang; Xu, Junfeng; Wu, Gang; Zhang, Dabing; Yang, Litao

2013-11-27

The papaya (Carica papaya L.) Chymopapain (CHY) gene has been reported as a suitable endogenous reference gene for genetically modified (GM) papaya detection in previous studies. Herein, we further validated the use of the CHY gene and its qualitative and quantitative polymerase chain reaction (PCR) assays through an interlaboratory collaborative ring trial. A total of 12 laboratories working on detection of genetically modified organisms participated in the ring trial and returned test results. Statistical analysis of the returned results confirmed the species specificity, low heterogeneity, and single-copy number of the CHY gene among different papaya varieties. The limit of detection of the CHY qualitative PCR assay was 0.1%, while the limit of quantification of the quantitative PCR assay was ∼25 copies of haploid papaya genome with acceptable PCR efficiency and linearity. The differences between the tested and true values of papaya content in 10 blind samples ranged from 0.84 to 6.58%. These results indicated that the CHY gene was suitable as an endogenous reference gene for the identification and quantification of GM papaya.

Demonstration of community pharmacy and managed care organization collaboration on cardiovascular disease risk factor identification using health risk appraisal.

PubMed

Dettloff, Rick W; Morse, Jacqueline A

2009-01-01

To integrate the resources from a local statewide managed care organization (MCO) and a supermarket pharmacy chain to conduct a comprehensive health risk appraisal (HRA). Collected data were used to assess cardiovascular risk factors and identify disease management opportunities. An analysis to determine the prevalence of risk factors was conducted on a cross-sectional HRA survey. The HRA involved point-of-care cholesterol screening (with a follow-up risk factor questionnaire) conducted by pharmacist employees of the employer group (a regional supermarket chain). Those eligible for the screening were employees of the supermarket chain and their dependents covered by the participating MCO. A total of 12,915 completed HRA questionnaires were received. The mean age of the employees participating was approximately 44 years. Of note, 14%, 24%, 21%, and 69% of questionnaires had abnormal values for total cholesterol, high-density lipoprotein (HDL) cholesterol, blood pressure, and body mass index (BMI), respectively. Compared with national benchmarks, low HDL cholesterol and BMI more than 30 kg/m2 were more common in this cohort. More than one-fourth of the employees in this analysis were identified as being at high risk for a coronary heart disease event. The unique collaboration presented here allowed for an expanded role of pharmacists to implement a quality improvement program. In response, the employer decided to continue the HRA screening and offer a employee contribution reduction-based health incentive to covered members. The employer also is considering offering cardiovascular disease management interventions that will be performed by the supermarket chain's pharmacists and targeted toward the identified risk factor trends.

Optics industry in Spain: a cluster approach to increasing competitiveness through collaboration in R&D and innovation

NASA Astrophysics Data System (ADS)

Cifuentes, Andrés F.

2011-10-01

The optics industry in Spain pooled together to create the Southern European Cluster in Photonics and Optics - SECPhO, founded in April 2009, with the mission to help the sector increase competitiveness, specially through collaboration. From 10 founding members, SECPhO no incorporates over 40 members, which is nearly 40% of the optics industry in the region. From the beginning of operations the cluster has focused on three strategic challenges: R&D+i and Productivity, Visibility and Internationalization, and Betterment and Retention of Talent. A brief summary of the clusters activities is given. In this article, the focus will be on R&D and innovation, through industry driven collaborative initiatives and the tools and actions that lead to successful partnerships. Topics discussed in this work are will be a cluster's role in promoting strategic change, the value chain approach to partnerships, international collaboration in projects and specific cluster activities. Some practical examples of initiatives relating to effective collaboration are described, focusing on one of the mayor challenges of our time: the greening of the planet. Examples will be addressed in smart cities, efficient LASER applications and lightweight optical sensors for civil security. In all cases the collaboration between the public and private sectors is shown.

The Synergize effect of Chain extender to Phosporic acid catalyst to the ultimate property of Soy-Polyurethane

NASA Astrophysics Data System (ADS)

Elvistia Firdaus, Flora

2016-04-01

The polyurethanes (PUs) foam were made from vegetable oil; a soybean based polyol. The foams were categorized into flexible and semi rigid. This research is manufacturally designed polyurethane foams by a process requiring the reaction of mixture of 2, 4- and 2, 6-Toluene di Isocyanate isomers, soy polyol in the presence of other ingredients. The objective of this work was to functionalized soy-polyol using phosporic acid catalyst and chain extender, study their collaborative reaction in producing ultimate property of PU foam. Correlates the foam morphology images in accordance to mechanical properties of foams.

Synthesis of new high performance lubricants and solid lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lagow, Richard J.

1993-04-08

In our second year of funding we began the testing phase of a number of new classes of lubricants. Three different testing collaborations have already begun and a fourth one is In the works with Dr. Stephen Hsu of the National Institute of Standards and Technology. Dr. Hsu also plans to test some of the same materials for us that Shell Development is studying. With Dr. Bill Jones of NASA, we are studying the effects of branching an high temperature lubricant properties in perfluoropolyethers, Initially Bill Jones is comparing the lubrication and physical properties of perfluorotetraglyme and the following twomore » spherical perfluoropolyethers, Note that one contains a fluorocarbon chain and the other one contains a fluorocarbon ether chain. The synthesis of these was reported in the last progress report. With Professor Patricia Thiel of Iowa State University, we are working on studies of perfluoromethylene oxide ethers and have prepared a series of four of these polyethers to study in collaboration with her research group. These perfluoromethylene oxide ethers have the best low temperature properties of any known lubricants. Thiel's group is studying their interactions with metals under extreme conditions. Thirdly, we have also begun an Interaction with W. August Birke of Shell Development Company in Houston for whom we have already prepared samples of the chlorine-substituted fluorocarbon polyether lubricants whose structures appear on page 54 of our research proposal. Each of these four structures is thought to have potential as lubricant additives to motor oils. We also have underway syntheses of other fluorine-containing branched ether lubricants. These new materials which are also promising as antifriction additives for motor oils appear ahead of the perfluoro additives as Appendix I to the progress report. Additionally for Birke and Shell Development we have at their request prepared the novel compound perfluoro salicylic acid. This synthesis was suggested by the Shell staff who thought that esters of perfluoro salicylic acid might be an excellent antifriction additive for motor oil fuels. One of the best additives currently used in motor oils is the hydrocarbon ester of salicylic acid.« less

The HADES-RICH upgrade using Hamamatsu H12700 MAPMTs with DiRICH FEE + Readout

NASA Astrophysics Data System (ADS)

Patel, V.; Traxler, M.

2018-03-01

The High Acceptance Di-Electron Spectrometer (HADES) is operational since the year 2000 and uses a hadron blind RICH detector for electron identification. The RICH photon detector is currently replaced by Hamamatsu H12700 MAPMTs with a readout system based on the DiRICH front-end module. The electronic readout chain is being developed as a joint effort of the HADES-, CBM- and PANDA collaborations and will also be used in the photon detectors for the upcoming Compressed Baryonic Matter (CBM) and PANDA experiments at FAIR . This article gives a brief overview on the photomultipliers and their quality assurance test measurements, as well as first measurements of the new DiRICH front-end module in final configurations.

From clinical proof-of-concept to commercialization of CAR T cells.

PubMed

Calmels, Boris; Mfarrej, Bechara; Chabannon, Christian

2018-04-01

The development of CAR T cells currently represents an exciting opportunity to convert the already published clinical successes observed in clinical trials into commercially available efficient therapies. However, the path toward successful commercialization is still hindered by many hurdles. Here, we review such issues as: the need for structured collaborations between hospital collection and clinical facilities and industry manufacturing facilities to streamline the supply chain; necessity for uniform and efficient medical procedures to cope with severe toxicities associated with CAR T cells; and absolute need to define an economical and sustainable model for manufacturers and payers. The fast pace at which the field is evolving requires careful assessments for the benefit of patients. Copyright © 2018 Elsevier Ltd. All rights reserved.

Talkoot Portals: Discover, Tag, Share, and Reuse Collaborative Science Workflows

NASA Astrophysics Data System (ADS)

Wilson, B. D.; Ramachandran, R.; Lynnes, C.

2009-05-01

A small but growing number of scientists are beginning to harness Web 2.0 technologies, such as wikis, blogs, and social tagging, as a transformative way of doing science. These technologies provide researchers easy mechanisms to critique, suggest and share ideas, data and algorithms. At the same time, large suites of algorithms for science analysis are being made available as remotely-invokable Web Services, which can be chained together to create analysis workflows. This provides the research community an unprecedented opportunity to collaborate by sharing their workflows with one another, reproducing and analyzing research results, and leveraging colleagues' expertise to expedite the process of scientific discovery. However, wikis and similar technologies are limited to text, static images and hyperlinks, providing little support for collaborative data analysis. A team of information technology and Earth science researchers from multiple institutions have come together to improve community collaboration in science analysis by developing a customizable "software appliance" to build collaborative portals for Earth Science services and analysis workflows. The critical requirement is that researchers (not just information technologists) be able to build collaborative sites around service workflows within a few hours. We envision online communities coming together, much like Finnish "talkoot" (a barn raising), to build a shared research space. Talkoot extends a freely available, open source content management framework with a series of modules specific to Earth Science for registering, creating, managing, discovering, tagging and sharing Earth Science web services and workflows for science data processing, analysis and visualization. Users will be able to author a "science story" in shareable web notebooks, including plots or animations, backed up by an executable workflow that directly reproduces the science analysis. New services and workflows of interest will be discoverable using tag search, and advertised using "service casts" and "interest casts" (Atom feeds). Multiple science workflow systems will be plugged into the system, with initial support for UAH's Mining Workflow Composer and the open-source Active BPEL engine, and JPL's SciFlo engine and the VizFlow visual programming interface. With the ability to share and execute analysis workflows, Talkoot portals can be used to do collaborative science in addition to communicate ideas and results. It will be useful for different science domains, mission teams, research projects and organizations. Thus, it will help to solve the "sociological" problem of bringing together disparate groups of researchers, and the technical problem of advertising, discovering, developing, documenting, and maintaining inter-agency science workflows. The presentation will discuss the goals of and barriers to Science 2.0, the social web technologies employed in the Talkoot software appliance (e.g. CMS, social tagging, personal presence, advertising by feeds, etc.), illustrate the resulting collaborative capabilities, and show early prototypes of the web interfaces (e.g. embedded workflows).

Sustained Strong Fluctuations in a Nonlinear Chain at Acoustic Vacuum: Beyond Equilibrium

DTIC Science & Technology

2011-10-21

studied [5]. Fermi, Pasta , and Ulam (FPU) in collaboration with Tsingou [6] probed the dynamics of such a system in the presence of linear and nonlinear...D. Vitali and P. Grigolini, ibid. 39, 1486 (1989). [6] E. Fermi, J. Pasta , and S. Ulam, Los Alamos National Laboratory Report No. LA-1940, 1955

Low Frequencies of Interference to EPA Quantitative Polymerase Chain Reaction (qPCR) Methods for Microbial Water Quality Monitoring in U.S. Rivers and Streams and Coastal Waters

EPA Science Inventory

In collaboration with U.S States and Tribes, the United States Environmental Protection Agency (EPA) conducts periodic and rotating, statistically based surveys of U.S. rivers and streams (National Rivers and Streams Assessment, NRSA), estuarine and Great Lakes nearshore coastal ...

FY02 CBNP Annual Report Input: Bioinformatics Support for CBNP Research and Deployments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slezak, T; Wolinsky, M

2002-10-31

The events of FY01 dynamically reprogrammed the objectives of the CBNP bioinformatics support team, to meet rapidly-changing Homeland Defense needs and requests from other agencies for assistance: Use computational techniques to determine potential unique DNA signature candidates for microbial and viral pathogens of interest to CBNP researcher and to our collaborating partner agencies such as the Centers for Disease Control and Prevention (CDC), U.S. Department of Agriculture (USDA), Department of Defense (DOD), and Food and Drug Administration (FDA). Develop effective electronic screening measures for DNA signatures to reduce the cost and time of wet-bench screening. Build a comprehensive system formore » tracking the development and testing of DNA signatures. Build a chain-of-custody sample tracking system for field deployment of the DNA signatures as part of the BASIS project. Provide computational tools for use by CBNP Biological Foundations researchers.« less

A solar station in Ica - Mutsumi Ishitsuka: a research center to improve education at the university and schools

NASA Astrophysics Data System (ADS)

Terrazas-Ramos, Raúl

2012-07-01

The San Luis Gonzaga National University of Ica has built a solar station, in collaboration with the Geophysical Institute of Peru, the National Astronomical Observatory of Japan and the Hida Observatory. The Solar Station has the following equipment: a digital Spectrograph Solar Refractor Telescope Takahashi 15 cm aperture, 60 cm reflector telescope aperture, a magnetometer-MAGDAS/CPNM and a Burst Monitor Telescope Solar-FMT (Project CHAIN). These teams support the development of astronomical science and Ica in Peru, likewise contributing to science worldwide. The development of basic science will be guaranteed when university students, professors and researchers work together. The Solar Station will be useful for studying the different levels of university education and also for the general public. The Solar Station will be a good way to spread science in the region through public disclosure.

Measurement of Quantum Phase-Slips in Josephson Junction Chains

NASA Astrophysics Data System (ADS)

Guichard, Wiebke

2011-03-01

Quantum phase-slip dynamics in Josephson junction chains could provide the basis for the realization of a new type of topologically protected qubit or for the implementation of a new current standard. I will present measurements of the effect of quantum phase-slips on the ground state of a Josephson junction chain. We can tune in situ the strength of the phase-slips. These phase-slips are the result of fluctuations induced by the finite charging energy of each junction in the chain. Our measurements demonstrate that a Josephson junction chain under phase bias constraint behaves in a collective way. I will also show evidence of coherent phase-slip interference, the so called Aharonov-Casher effect. This phenomenon is the dual of the well known Aharonov-Bohm interference. In collaboration with I.M. Pop, Institut Neel, C.N.R.S. and Universite Joseph Fourier, BP 166, 38042 Grenoble, France; I. Protopopov, L. D. Landau Institute for Theoretical Physics, Kosygin str. 2, Moscow 119334, Russia and Institut fuer Nanotechnologie, Karlsruher Institut fuer Technologie, 76021 Karlsruhe, Germany; and F. Lecocq, Z. Peng, B. Pannetier, O. Buisson, Institut Neel, C.N.R.S. and Universite Joseph Fourier. European STREP MIDAS, ANR QUANTJO.

Integration of CuAAC Polymerization and Controlled Radical Polymerization into Electron Transfer Mediated "Click-Radical" Concurrent Polymerization.

PubMed

Xue, Wentao; Wang, Jie; Wen, Ming; Chen, Gaojian; Zhang, Weidong

2017-03-01

The successful chain-growth copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel-permeation chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. In addition, the electron transfer mediated "click-radical" concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well-defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An automated processing chains for surface temperature monitoring on Earth's most active volcanoes by optical data from multiple satellites

NASA Astrophysics Data System (ADS)

Silvestri, Malvina; Musacchio, Massimo; Fabrizia Buongiorno, Maria

2017-04-01

The Geohazards Exploitation Platform, or GEP is one of six Thematic Exploitation Platforms developed by ESA to serve data user communities. As a new element of the ground segment delivering satellite results to users, these cloud-based platforms provide an online environment to access information, processing tools, computing resources for community collaboration. The aim is to enable the easy extraction of valuable knowledge from vast quantities of satellite-sensed data now being produced by Europe's Copernicus programme and other Earth observation satellites. In this context, the estimation of surface temperature on active volcanoes around the world is considered. E2E processing chains have been developed for different satellite data (ASTER, Landsat8 and Sentinel 3 missions) using thermal infrared (TIR) channels by applying specific algorithms. These chains have been implemented on the GEP platform enabling the use of EO missions and the generation of added value product such as surface temperature map, from not skilled users. This solution will enhance the use of satellite data and improve the dissemination of the results saving valuable time (no manual browsing, downloading or processing is needed) and producing time series data that can be speedily extracted from a single co-registered pixel, to highlight gradual trends within a narrow area. Moreover, thanks to the high-resolution optical imagery of Sentinel 2 (MSI), the detection of lava maps during an eruption can be automatically obtained. The proposed lava detection method is based on a contextual algorithm applied to Sentinel-2 NIR (band 8 - 0.8 micron) and SWIR (band 12 - 2.25 micron) data. Examples derived by last eruptions on active volcanoes are showed.

An Exploratory Case Study of Information-Sharing and Collaboration within Air Force Supply Chain Management

DTIC Science & Technology

2006-03-01

International Journal of Production Economics , Vol. 93-94, pp. 53-99, 2005. -----. “Approximate...Optimization of a Two-level Distribution Inventory System,” International Journal of Production Economics , Vol. 81-81, pp. 545-553, 2003...Scaling Down Multi-Echelon Inventory Problems,” International Journal of Production Economics , Vol. 71, pp. 255-261, 2001. Axsater, Sven

First Megascience Experiment at Fermilab: Through Hardship to Protons

NASA Astrophysics Data System (ADS)

Pronskikh, Vitaly; Higgins, Valerie

The E-36 experiment on the small angle proton-proton scattering that officially started in 1970, making use of the Main Ring beams and giving rise to a chain of similar experiments that continued after 1972, was the first experiment at the newly built NAL. It was also the first US/USSR collaboration in particle physics as well as the first experiment that can be confidently characterized as megascience. The experimental data were interpreted as an indication of the pomeron, a quasiparticle that had been named after the Soviet theorist I. Pomeranchuk. The idea of the experiment can be traced back to the Rochester conference held in 1970 in Kiev where two American and Soviet physicists met to develop it and later acquainted NAL director Robert Wilson with it. Wilson enthusiastically set the stage for the experiment at NAL. Involving a gas-jet target built at the Dubna machine shop of Joint Institute for Nuclear Research and brought to Batavia, Illinois, the experiment established cooperation between the US and the Soviets in the spirit of their contemporary Apollo-Soyuz space program, thus breaking the ice of the Cold War from within high-energy physics. In this talk based on the Fermilab Archives and interviews, we discuss the financial and administrative obstacles raised by Soviet officials that the Russian collaborators had to overcome, interinstitutional tensions among the Soviets that accompanied the collaboration, NAL culture as well as the roles of scientists in megascience as ambassadors of peace.

Collaborative trial validation studies of real-time PCR-based GMO screening methods for detection of the bar gene and the ctp2-cp4epsps construct.

PubMed

Grohmann, Lutz; Brünen-Nieweler, Claudia; Nemeth, Anne; Waiblinger, Hans-Ulrich

2009-10-14

Polymerase Chain Reaction (PCR)-based screening methods targeting genetic elements commonly used in genetically modified (GM) plants are important tools for the detection of GM materials in food, feed, and seed samples. To expand and harmonize the screening capability of enforcement laboratories, the German Federal Office of Consumer Protection and Food Safety conducted collaborative trials for interlaboratory validation of real-time PCR methods for detection of the phosphinothricin acetyltransferase (bar) gene from Streptomyces hygroscopicus and a construct containing the 5-enolpyruvylshikimate-3-phosphate synthase gene from Agrobacterium tumefaciens sp. strain CP4 (ctp2-cp4epsps), respectively. To assess the limit of detection, precision, and accuracy of the methods, laboratories had to analyze two sets of 18 coded genomic DNA samples of events LLRice62 and MS8 with the bar method and NK603 and GT73 with the ctp2-cp4epsps method at analyte levels of 0, 0.02, and 0.1% GM content, respectively. In addition, standard DNAs were provided to the laboratories to generate calibration curves for copy number quantification of the bar and ctp2-cp4epsps target sequences present in the test samples. The study design and the results obtained are discussed with respect to the difficult issue of developing general guidelines and concepts for the collaborative trial validation of qualitative PCR screening methods.

Evolution of the cooperation between the World Organisation for Animal Health (OIE) and the Codex Alimentarius Commission.

PubMed

Berlingieri, F; Bruno, A; Njeumi, F; Cavirani, S

2007-12-01

The Agreement on the Application of Sanitary and Phytosanitary Measures (SPS Agreement) of the World Trade Organization recognises the international standards adopted by the World Organisation for Animal Health (OIE) in matters of animal health and zoonoses and those adopted by the Codex Alimentarius Commission (the Commission) in matters of food safety. The importance of the production phase in ensuring food safety has been acknowledged and the OIE and the Commission have been working to strengthen their cooperation since 2001, with the intent of promoting a holistic approach to the food chain. Procedures for exchanging information are in place, communication has improved and there is cross-referencing between the respective international standards of the two organisations. Good examples of collaboration in the development of standards include the texts produced by the two organisations regarding meat inspection and animal/product identification and traceability. At the same time, there is still room for improving cooperation and the legal services of the OIE, the Food and Agriculture Organization of the United Nations and the World Health Organization are expected to work together to find options for closer collaboration between the OIE and the Commission.

Traceability System For Agricultural Productsbased on Rfid and Mobile Technology

NASA Astrophysics Data System (ADS)

Sugahara, Koji

In agriculture, it is required to establish and integrate food traceability systems and risk management systems in order to improve food safety in the entire food chain. The integrated traceability system for agricultural products was developed, based on innovative technology of RFID and mobile computing. In order to identify individual products on the distribution process efficiently,small RFID tags with unique ID and handy RFID readers were applied. On the distribution process, the RFID tags are checked by using the readers, and transit records of the products are stored to the database via wireless LAN.Regarding agricultural production, the recent issues of pesticides misuse affect consumer confidence in food safety. The Navigation System for Appropriate Pesticide Use (Nouyaku-navi) was developed, which is available in the fields by Internet cell-phones. Based on it, agricultural risk management systems have been developed. These systems collaborate with traceability systems and they can be applied for process control and risk management in agriculture.

Emergence of biopharmaceutical innovators in China, India, Brazil, and South Africa as global competitors and collaborators.

PubMed

Rezaie, Rahim; McGahan, Anita M; Frew, Sarah E; Daar, Abdallah S; Singer, Peter A

2012-06-06

Biopharmaceutical innovation has had a profound health and economic impact globally. Developed countries have traditionally been the source of most innovations as well as the destination for the resulting economic and health benefits. As a result, most prior research on this sector has focused on developed countries. This paper seeks to fill the gap in research on emerging markets by analyzing factors that influence innovative activity in the indigenous biopharmaceutical sectors of China, India, Brazil, and South Africa. Using qualitative research methodologies, this paper a) shows how biopharmaceutical innovation is taking place within the entrepreneurial sectors of these emerging markets, b) identifies common challenges that indigenous entrepreneurs face, c) highlights the key role played by the state, and d) reveals that the transition to innovation by companies in the emerging markets is characterized by increased global integration. It suggests that biopharmaceutical innovators in emerging markets are capitalizing on opportunities to participate in the drug development value chain and thus developing capabilities and relationships for competing globally both with and against established companies headquartered in developed countries.

Emergence of biopharmaceutical innovators in China, India, Brazil, and South Africa as global competitors and collaborators

PubMed Central

2012-01-01

Biopharmaceutical innovation has had a profound health and economic impact globally. Developed countries have traditionally been the source of most innovations as well as the destination for the resulting economic and health benefits. As a result, most prior research on this sector has focused on developed countries. This paper seeks to fill the gap in research on emerging markets by analyzing factors that influence innovative activity in the indigenous biopharmaceutical sectors of China, India, Brazil, and South Africa. Using qualitative research methodologies, this paper a) shows how biopharmaceutical innovation is taking place within the entrepreneurial sectors of these emerging markets, b) identifies common challenges that indigenous entrepreneurs face, c) highlights the key role played by the state, and d) reveals that the transition to innovation by companies in the emerging markets is characterized by increased global integration. It suggests that biopharmaceutical innovators in emerging markets are capitalizing on opportunities to participate in the drug development value chain and thus developing capabilities and relationships for competing globally both with and against established companies headquartered in developed countries. PMID:22672351

Vaccines, inspiring innovation in health.

PubMed

Pagliusi, Sonia; Dennehy, Maureen; Kim, Hun

2018-05-19

This report covers the topics of pandemics, epidemics and partnerships, including regulatory convergence initiatives, new technologies and novel vaccines, discussed by leading public and private sector stakeholders at the 18th Annual General Meeting (AGM) of the Developing Countries Vaccine Manufacturers' Network (DCVMN). Contributions of Gavi and the vaccine industry from emerging countries to the growing global vaccine market, by improving the supply base from manufacturers in developing countries and contributing to 58% of doses, were highlighted. The Coalition for Epidemic Preparedness Innovations (CEPI), the International Vaccine Institute (IVI) and others reported on new strategies to ensure speedy progress in preclinical and clinical development of innovative vaccines for future MERS, Zika or other outbreak response. Priorities for vaccine stockpiling, to assure readiness during emergencies and to prevent outbreaks due to re-emerging diseases such as yellow fever, cholera and poliomyelitis, were outlined. The role of partnerships in improving global vaccine access, procurement and immunization coverage, and shared concerns were reviewed. The World Health Organization (WHO) and other international collaborating partners provided updates on the Product, Price and Procurement database, the prequalification of vaccines, the control of neglected tropical diseases, particularly the new rabies elimination initiative, and regulatory convergence proposals to accelerate vaccine registration in developing countries. Updates on supply chain innovations and novel vaccine platforms were presented. The discussions enabled members and partners to reflect on efficiency of research & development, supply chain tools and trends in packaging technologies improving delivery of existing vaccines, and allowing a deeper understanding of the current public-health objectives, industry financing, and global policies, required to ensure optimal investments, alignment and stability of vaccine supply in developing countries. Copyright © 2018. Published by Elsevier Ltd.

Models of Protocellular Structure, Function and Evolution

NASA Technical Reports Server (NTRS)

New, Michael H.; Pohorille, Andrew; Szostak, Jack W.; Keefe, Tony; Lanyi, Janos K.; DeVincenzi, Donald L. (Technical Monitor)

2001-01-01

In the absence of any record of protocells, the most direct way to test our understanding, of the origin of cellular life is to construct laboratory models that capture important features of protocellular systems. Such efforts are currently underway in a collaborative project between NASA-Ames, Harvard Medical School and University of California. They are accompanied by computational studies aimed at explaining self-organization of simple molecules into ordered structures. The centerpiece of this project is a method for the in vitro evolution of protein enzymes toward arbitrary catalytic targets. A similar approach has already been developed for nucleic acids in which a small number of functional molecules are selected from a large, random population of candidates. The selected molecules are next vastly multiplied using the polymerase chain reaction.

Lean production in improving supply chain performance through hybrid model SCOR 11.0 - system dynamics

NASA Astrophysics Data System (ADS)

Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi

2016-02-01

Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.

The 'Room within a Room' Concept for Monitored Warhead Dismantlement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanner, Jennifer E.; Benz, Jacob M.; White, Helen

2014-12-01

Over the past 10 years, US and UK experts have engaged in a technical collaboration with the aim of improving scientific and technological abilities in support of potential future nuclear arms control and non-proliferation agreements. In 2011 a monitored dismantlement exercise provided an opportunity to develop and test potential monitoring technologies and approaches. The exercise followed a simulated nuclear object through a dismantlement process and looked to explore, with a level of realism, issues surrounding device and material monitoring, chain of custody, authentication and certification of equipment, data management and managed access. This paper focuses on the development and deploymentmore » of the ‘room-within-a-room’ system, which was designed to maintain chain of custody during disassembly operations. A key challenge for any verification regime operating within a nuclear weapon complex is to provide the monitoring party with the opportunity to gather sufficient evidence, whilst protecting sensitive or proliferative information held by the host. The requirement to address both monitoring and host party concerns led to a dual function design which: • Created a controlled boundary around the disassembly process area which could provide evidence of unauthorised diversion activities. • Shielded sensitive disassembly operations from monitoring party observation. The deployed room-within-a-room was an integrated system which combined a number of chain of custody technologies (i.e. cameras, tamper indicating panels and enclosures, seals, unique identifiers and radiation portals) and supporting deployment procedures. This paper discusses the bounding aims and constraints identified by the monitoring and host parties with respect to the disassembly phase, the design of the room-within-a-room system, lessons learned during deployment, conclusions and potential areas of future work. Overall it was agreed that the room-within-a-room approach was effective but the individual technologies used to create the system deployed during this exercise required further development.« less

Voluntary medical male circumcision: logistics, commodities, and waste management requirements for scale-up of services.

PubMed

Edgil, Dianna; Stankard, Petra; Forsythe, Steven; Rech, Dino; Chrouser, Kristin; Adamu, Tigistu; Sakallah, Sameer; Thomas, Anne Goldzier; Albertini, Jennifer; Stanton, David; Dickson, Kim Eva; Njeuhmeli, Emmanuel

2011-11-01

The global HIV prevention community is implementing voluntary medical male circumcision (VMMC) programs across eastern and southern Africa, with a goal of reaching 80% coverage in adult males by 2015. Successful implementation will depend on the accessibility of commodities essential for VMMC programming and the appropriate allocation of resources to support the VMMC supply chain. For this, the United States President's Emergency Plan for AIDS Relief, in collaboration with the World Health Organization and the Joint United Nations Programme on HIV/AIDS, has developed a standard list of commodities for VMMC programs. This list of commodities was used to inform program planning for a 1-y program to circumcise 152,000 adult men in Swaziland. During this process, additional key commodities were identified, expanding the standard list to include commodities for waste management, HIV counseling and testing, and the treatment of sexually transmitted infections. The approximate costs for the procurement of commodities, management of a supply chain, and waste disposal, were determined for the VMMC program in Swaziland using current market prices of goods and services. Previous costing studies of VMMC programs did not capture supply chain costs, nor the full range of commodities needed for VMMC program implementation or waste management. Our calculations indicate that depending upon the volume of services provided, supply chain and waste management, including commodities and associated labor, contribute between US$58.92 and US$73.57 to the cost of performing one adult male circumcision in Swaziland. Experience with the VMMC program in Swaziland indicates that supply chain and waste management add approximately US$60 per circumcision, nearly doubling the total per procedure cost estimated previously; these additional costs are used to inform the estimate of per procedure costs modeled by Njeuhmeli et al. in "Voluntary Medical Male Circumcision: Modeling the Impact and Cost of Expanding Male Circumcision for HIV Prevention in Eastern and Southern Africa." Program planners and policy makers should consider the significant contribution of supply chain and waste management to VMMC program costs as they determine future resource needs for VMMC programs.

Sustainability, Innovation, and the Future of Environmental Protection

DTIC Science & Technology

2010-09-01

Sustainability, & chemical product design Coffee decaffeination using methylene chloride Coffee decaffeination using CO2 (not a “solvent” by FDA) Coffee beans ...contin.) • Materials sustainability – Trace metals • Security of supply chain • Appropriate selection and use • Mass balance on use, reuse, and...Design • Transdisciplinary Collaboration and Integrative Systems • Innovation and Catalysis Scientific Values for the Path Forward 17 Office of

Supply Chain Collaboration: Information Sharing in a Tactical Operating Environment

DTIC Science & Technology

2013-06-01

architecture, there are four tiers: Client (Web Application Clients ), Presentation (Web-Server), Processing (Application-Server), Data (Database...organization in each period. This data will be collected to analyze. i) Analyses and Validation: We will do a statistics test in this data, Pareto ...notes, outstanding deliveries, and inventory. i) Analyses and Validation: We will do a statistics test in this data, Pareto analyses and confirmation

Talkoot Portals: Discover, Tag, Share, and Reuse Collaborative Science Workflows (Invited)

NASA Astrophysics Data System (ADS)

Wilson, B. D.; Ramachandran, R.; Lynnes, C.

2009-12-01

A small but growing number of scientists are beginning to harness Web 2.0 technologies, such as wikis, blogs, and social tagging, as a transformative way of doing science. These technologies provide researchers easy mechanisms to critique, suggest and share ideas, data and algorithms. At the same time, large suites of algorithms for science analysis are being made available as remotely-invokable Web Services, which can be chained together to create analysis workflows. This provides the research community an unprecedented opportunity to collaborate by sharing their workflows with one another, reproducing and analyzing research results, and leveraging colleagues’ expertise to expedite the process of scientific discovery. However, wikis and similar technologies are limited to text, static images and hyperlinks, providing little support for collaborative data analysis. A team of information technology and Earth science researchers from multiple institutions have come together to improve community collaboration in science analysis by developing a customizable “software appliance” to build collaborative portals for Earth Science services and analysis workflows. The critical requirement is that researchers (not just information technologists) be able to build collaborative sites around service workflows within a few hours. We envision online communities coming together, much like Finnish “talkoot” (a barn raising), to build a shared research space. Talkoot extends a freely available, open source content management framework with a series of modules specific to Earth Science for registering, creating, managing, discovering, tagging and sharing Earth Science web services and workflows for science data processing, analysis and visualization. Users will be able to author a “science story” in shareable web notebooks, including plots or animations, backed up by an executable workflow that directly reproduces the science analysis. New services and workflows of interest will be discoverable using tag search, and advertised using “service casts” and “interest casts” (Atom feeds). Multiple science workflow systems will be plugged into the system, with initial support for UAH’s Mining Workflow Composer and the open-source Active BPEL engine, and JPL’s SciFlo engine and the VizFlow visual programming interface. With the ability to share and execute analysis workflows, Talkoot portals can be used to do collaborative science in addition to communicate ideas and results. It will be useful for different science domains, mission teams, research projects and organizations. Thus, it will help to solve the “sociological” problem of bringing together disparate groups of researchers, and the technical problem of advertising, discovering, developing, documenting, and maintaining inter-agency science workflows. The presentation will discuss the goals of and barriers to Science 2.0, the social web technologies employed in the Talkoot software appliance (e.g. CMS, social tagging, personal presence, advertising by feeds, etc.), illustrate the resulting collaborative capabilities, and show early prototypes of the web interfaces (e.g. embedded workflows).

a Study of Co-Planing Technology of Spaceborne, Airborne and Ground Remote Sensing Detecting Resource, Driven by Disaster Emergency Task

NASA Astrophysics Data System (ADS)

Yu, F.; Chen, H.; Tu, K.; Wen, Q.; He, J.; Gu, X.; Wang, Z.

2018-04-01

Facing the monitoring needs of emergency responses to major disasters, combining the disaster information acquired at the first time after the disaster and the dynamic simulation result of the disaster chain evolution process, the overall plan for coordinated planning of spaceborne, airborne and ground observation resources have been designed. Based on the analysis of the characteristics of major disaster observation tasks, the key technologies of spaceborne, airborne and ground collaborative observation project are studied. For different disaster response levels, the corresponding workflow tasks are designed. On the basis of satisfying different types of disaster monitoring demands, the existing multi-satellite collaborative observation planning algorithms are compared, analyzed, and optimized.

Collaboration, Communication and Co-ordination in Agile Software Development Practice

NASA Astrophysics Data System (ADS)

Robinson, Hugh; Sharp, Helen

This chapter analyses the results of a series of observational studies of agile software developmentagile software development teams, identifying commonalities in collaboration, co-ordination and communication activities. Pairing and customer collaborationcustomer collaboration are focussed on to illustrate the nature of collaboration and communication, as are two simple physical artefacts that emerged through analysis as being an information-rich focal point for the co-ordination of collaboration and communication activities. The analysis shows that pairingpairing has common characteristics across all teams, while customer collaboration differs between the teams depending on the application and organisational context of development.

In-Space Manufacturing: Pioneering a Sustainable Path to Mars

NASA Technical Reports Server (NTRS)

Werkheiser, Niki

2015-01-01

In order to provide meaningful impacts to exploration technology needs, the In-Space Manufacturing (ISM) Initiative must influence exploration systems design now. In-space manufacturing offers: dramatic paradigm shift in the development and creation of space architectures; efficiency gain and risk reduction for low Earth orbit and deep space exploration; and "pioneering" approach to maintenance, repair, and logistics leading to sustainable, affordable supply chain model. In order to develop application-based capabilities in time to support NASA budget and schedule, ISM must be able to leverage the significant commercial developments, which requires innovative, agile collaborative mechanisms (contracts, challenges, SBIR's, etc.); and NASA-unique investments to focus primarily on adapting the technologies and processes to the microgravity environment. We must do the foundational work - it is the critical path for taking these technologies from lab curiosities to institutionalized capabilities: characterize, certify, institutionalize, design for Additive Manufacturing (AM). Ideally, International Space Station (ISS) U.S. lab rack or partial rack space should be identified for in-space manufacturing utilization in order to continue technology development of a suite of capabilities required for exploration missions, as well as commercialization on ISS.

Remanufacturing Aided Added-Value Creation, Innovations Meeting to Deliver Sustainable Manufacturing

NASA Astrophysics Data System (ADS)

Tariq Abullah, Ziyad; Guo, Shun Sheng; Yun, Sheng Bu

2015-05-01

End-of-life scrap steel such as vehicles bulks and bodies, steel wheel and shells are easily land filled at the end-of-life when treated in a developing country with non-industrial infrastructure. Research idea is about composite shape steel remanufacturing to be sheet steel for construction application through nested recovered pieces of scrap steel within new sheet steel base to meet innovation value creation of remanufactured steel and innovation eco-design of steel products to close supply chain through linkage developed and developing countries of non-industrial infrastructure economy. That can be satisfied through comprehensive business- education-training model conduction firstly at the developing countries to reduce costs and change the intensive labour remanufacturing paradigm collaboratively. Sustainable remanufacturing business model can be applied based on infrastructure of educational institutions such as institutes of technology to adopt environmental, economic, and social developments as triple bottom line sustainability. Such innovation value creation is driven by eco-design and eco-innovation enabling where the meet to deliver human development, employment, and education conscious environment and bench mark recommendations of development directions for upgrading to apply business that allows eco-societies to emerge, through cooperative steel scrap processing.

Optimization of location routing inventory problem with transshipment

NASA Astrophysics Data System (ADS)

Ghani, Nor Edayu Abd; Shariff, S. Sarifah Radiah; Zahari, Siti Meriam

2015-05-01

Location Routing Inventory Problem (LRIP) is a collaboration of the three components in the supply chain. It is confined by location-allocation, vehicle routing and inventory management. The aim of the study is to minimize the total system cost in the supply chain. Transshipment is introduced in order to allow the products to be shipped to a customer who experiences a shortage, either directly from the supplier or from another customer. In the study, LRIP is introduced with the transshipment (LRIPT) and customers act as the transshipment points. We select the transshipment point by using the p-center and we present the results in two divisions of cases. Based on the analysis, the results indicated that LRIPT performed well compared to LRIP.

Beyond the Bend: Exploring the Conformational Landscape of Decyl, Undecyl, and Dodecylbenzene

NASA Astrophysics Data System (ADS)

Hewett, Daniel M.; Zwier, Timothy S.

2017-06-01

Alkylbenzenes are important components in the combustion process: they make up 20-30% of petroleum fuels and are intermediates on the pathway to soot formation. Understanding their conformational preferences is a vital step in understanding the processes by which fuels begin their journey from small, simple hydrocarbons into the large, graphitic masses of soot. Previous work done in our group, in collaboration with the Sibert group, found that the smallest alkylbenzene which folds its chain back over the ring is octylbenzene. The population of the lone folded structure in octylbenzene is low; however, theory predicts a rapid stabilization of the folded conformations relative to more extended structures as the chain length is increased, suggesting a likely shift in population towards folded structures. This talk will focus on our exploration of this possibility by discussing the UV excitation and single conformation IR spectra of decyl, undecyl, and dodecylbenzene, where increasing chain length allows for multiple stable folded configurations.

Controlled Radical Polymerization as an Enabling Approach for the Next Generation of Protein-Polymer Conjugates.

PubMed

Pelegri-O'Day, Emma M; Maynard, Heather D

2016-09-20

Protein-polymer conjugates are unique constructs that combine the chemical properties of a synthetic polymer chain with the biological properties of a biomacromolecule. This often leads to improved stabilities, solubilities, and in vivo half-lives of the resulting conjugates, and expands the range of applications for the proteins. However, early chemical methods for protein-polymer conjugation often required multiple polymer modifications, which were tedious and low yielding. To solve these issues, work in our laboratory has focused on the development of controlled radical polymerization (CRP) techniques to improve synthesis of protein-polymer conjugates. Initial efforts focused on the one-step syntheses of protein-reactive polymers through the use of functionalized initiators and chain transfer agents. A variety of functional groups such as maleimide and pyridyl disulfide could be installed with high end-group retention, which could then react with protein functional groups through mild and biocompatible chemistries. While this grafting to method represented a significant advance in conjugation technique, purification and steric hindrance between large biomacromolecules and polymer chains often led to low conjugation yields. Therefore, a grafting from approach was developed, wherein a polymer chain is grown from an initiating site on a functionalized protein. These conjugates have demonstrated improved homogeneity, characterization, and easier purification, while maintaining protein activity. Much of this early work utilizing CRP techniques focused on polymers made up of biocompatible but nonfunctional monomer units, often containing oligoethylene glycol meth(acrylate) or N-isopropylacrylamide. These branched polymers have significant advantages compared to the historically used linear poly(ethylene glycols) including decreased viscosities and thermally responsive behavior, respectively. Recently, we were motivated to use CRP techniques to develop polymers with rationally designed and functional biological properties for conjugate preparation. Specifically, two families of saccharide-inspired polymers were developed for stabilization and activation of therapeutic biomolecules. A series of polymers with trehalose side-chains and vinyl backbones were prepared and used to stabilize proteins against heat and lyophilization stress as both conjugates and additives. These materials, which combine properties of osmolytes with nonionic surfactants, have significant potential for in vivo therapeutic use. Additionally, polymers that mimic the structure of the naturally occurring polysaccharide heparin were prepared. These polymers contained negatively charged sulfonate groups and imparted stabilization to a heparin-binding growth factor after conjugation. A screen of other sulfonated polymers led to the development of a polymer with improved heparin mimesis, enhancing both stability and activity of the protein to which it was attached. Chemical improvements over the past decade have enabled the preparation of a diverse set of protein-polymer conjugates by controlled polymerization techniques. Now, the field should thoroughly explore and expand both the range of polymer structures and also the applications available to protein-polymer conjugates. As we move beyond medicine toward broader applications, increased collaboration and interdisciplinary work will result in the further development of this exciting field.

Hedgehog Protein Cholesterolysis: A New Therapeutic Target for Advanced Prostate Cancer

DTIC Science & Technology

2016-10-01

research group page, with links to publicationshttp://www.binghamton.edu/chemistry/people/callahan/callahan.html s 5. PARTICIPANTS & OTHER COLLABORATING...which changes the side chain by only a methylene group . All four expressed as soluble proteins in E. coli and exhibited strong FRET signals consistent...Acknowledgements We thank members of the Callahan research group for technical assistance and helpful comments on the manuscript. Special thanks to Dr

Percolating Contact Subnetworks on the Edge of Isostaticity

DTIC Science & Technology

2011-01-01

pressure, and cyclic loading of photoelastic disks under constant vol- ume. D. M. Walker · A. Tordesillas (B) Department of Mathematics and Statistics ...Complex networks · Spanning trees · Force chains · Force cycles · Isostatic 1 Introduction Ioannis Vardoulakis and his collaborators brought soil ...57, 706–727 (2009) 2. Vardoulakis, I.: Shear-banding and liquefaction in granular mate- rials on the basis of a Cosserat continuum theory. Ingenieur

An open source business model for malaria.

PubMed

Årdal, Christine; Røttingen, John-Arne

2015-01-01

Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, 'closed' publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more "open source" approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV) to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.' President's Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related to new malaria medicines and consider alternative incentives, like WHO prequalification.

Dual RING E3 Architectures Regulate Multiubiquitination and Ubiquitin Chain Elongation by APC/C.

PubMed

Brown, Nicholas G; VanderLinden, Ryan; Watson, Edmond R; Weissmann, Florian; Ordureau, Alban; Wu, Kuen-Phon; Zhang, Wei; Yu, Shanshan; Mercredi, Peter Y; Harrison, Joseph S; Davidson, Iain F; Qiao, Renping; Lu, Ying; Dube, Prakash; Brunner, Michael R; Grace, Christy R R; Miller, Darcie J; Haselbach, David; Jarvis, Marc A; Yamaguchi, Masaya; Yanishevski, David; Petzold, Georg; Sidhu, Sachdev S; Kuhlman, Brian; Kirschner, Marc W; Harper, J Wade; Peters, Jan-Michael; Stark, Holger; Schulman, Brenda A

2016-06-02

Protein ubiquitination involves E1, E2, and E3 trienzyme cascades. E2 and RING E3 enzymes often collaborate to first prime a substrate with a single ubiquitin (UB) and then achieve different forms of polyubiquitination: multiubiquitination of several sites and elongation of linkage-specific UB chains. Here, cryo-EM and biochemistry show that the human E3 anaphase-promoting complex/cyclosome (APC/C) and its two partner E2s, UBE2C (aka UBCH10) and UBE2S, adopt specialized catalytic architectures for these two distinct forms of polyubiquitination. The APC/C RING constrains UBE2C proximal to a substrate and simultaneously binds a substrate-linked UB to drive processive multiubiquitination. Alternatively, during UB chain elongation, the RING does not bind UBE2S but rather lures an evolving substrate-linked UB to UBE2S positioned through a cullin interaction to generate a Lys11-linked chain. Our findings define mechanisms of APC/C regulation, and establish principles by which specialized E3-E2-substrate-UB architectures control different forms of polyubiquitination. Copyright © 2016 Elsevier Inc. All rights reserved.

Should We Travel by Plane, Car, Train, or Bus? Teacher/Child Collaboration in Developing a Thematic Literacy Center.

ERIC Educational Resources Information Center

Walker, Carolyn Ann; And Others

1997-01-01

Describes collaborating with preschool children in the development of themed reading and writing activities in a travel agency play center in the classroom. Discuss collaboration rather than prescription, literacy in the travel agency, making plans with literacy-related materials, and developing a successful collaboration. (SR)

Experiences of ocean literacy with different users of operational oceanography services and with high school students

NASA Astrophysics Data System (ADS)

Agostini, Paola; Coppini, Giovanni; Martinelli, Sara; Bonarelli, Roberto; Lecci, Rita; Pinardi, Nadia; Cretì, Sergio; Turrisi, Giuseppe; Ciliberti, Stefania Angela; Federico, Ivan; Mannarini, Gianandrea; Verri, Giorgia; Jansen, Eric; Lusito, Letizia; Macchia, Francesca; Montagna, Fabio; Buonocore, Mauro; Marra, Palmalisa; Tedesco, Luca; Cavallo, Arturo

2017-04-01

According to a common definition, ocean literacy is an understanding of the ocean's influence on people and people influence on the ocean. An ocean-literate person is able to make informed and responsible decisions regarding the ocean and its resources. To this aim, this paper presents operational oceanographic tools developed to meet the needs of different users, and activities performed in collaboration with high school students to support new developments of the same tools. Operational oceanography allows to deal with societal challenges such as maritime safety, coastal and marine environment management, climate change assessment and marine resources management. Oceanographic products from the European Copernicus Marine Monitoring Service - CMEMS are transformed and communicated to public and stakeholders through adding-value chains (downstreaming), which consider advanced visualization, usage of multi-channels technological platforms and specific models and algorithms. Sea Situational Awareness is strategically important for management and safety purposes of any marine domain and, in particular, the Mediterranean Sea and its coastal areas. Examples of applications for sea situational awareness and maritime safety are here presented, through user-friendly products available both by web and mobile channels (that already reach more than 100.000 users in the Mediterranean area). Further examples of ocean literacy are web bulletins used to communicate the technical contents and information related to oceanographic forecasts to a wide public. They are the result of a collaboration with high school students, with whom also other activities on improving products visualization and online communication have been performed.

Medicinal chemistry inspired fragment-based drug discovery.

PubMed

Lanter, James; Zhang, Xuqing; Sui, Zhihua

2011-01-01

Lead generation can be a very challenging phase of the drug discovery process. The two principal methods for this stage of research are blind screening and rational design. Among the rational or semirational design approaches, fragment-based drug discovery (FBDD) has emerged as a useful tool for the generation of lead structures. It is particularly powerful as a complement to high-throughput screening approaches when the latter failed to yield viable hits for further development. Engagement of medicinal chemists early in the process can accelerate the progression of FBDD efforts by incorporating drug-friendly properties in the earliest stages of the design process. Medium-chain acyl-CoA synthetase 2b and ketohexokinase are chosen as examples to illustrate the importance of close collaboration of medicinal chemists, crystallography, and modeling. Copyright © 2011 Elsevier Inc. All rights reserved.

Consortium for Algal Biofuel Commercialization (CAB-COMM) Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayfield, Stephen P.

The Consortium for Algal Biofuel Commercialization (CAB-Comm) was established in 2010 to conduct research to enable commercial viability of alternative liquid fuels produced from algal biomass. The main objective of CAB-Comm was to dramatically improve the viability of algae as a source of liquid fuels to meet US energy needs, by addressing several significant barriers to economic viability. To achieve this goal, CAB-Comm took a diverse set of approaches on three key aspects of the algal biofuels value chain: crop protection; nutrient utilization and recycling; and the development of genetic tools. These projects have been undertaken as collaboration between sixmore » academic institutions and two industrial partners: University of California, San Diego; Scripps Institution of Oceanography; University of Nebraska, Lincoln; Rutgers University; University of California, Davis; Johns Hopkins University; Sapphire Energy; and Life Technologies.« less

Working with grocers to reduce dietary sodium: lessons learned from the Broome County Sodium Reduction in Communities pilot project.

PubMed

Johnston, Yvonne A; McFadden, Mary; Lamphere, Marissa; Buch, Karen; Stark, Beth; Salton, Judith Lynn

2014-01-01

The purpose of this article is to describe implementation of and lessons learned from the Broome County Sodium Reduction in Communities grocery store initiative. This pilot project was conducted in collaboration with a regional supermarket chain and endeavored to develop population-based strategies for reducing sodium intake. Key interventions included marketing strategies, taste test demonstrations, and a public media campaign. Project staff worked closely with corporate registered dietitian nutritionists, a nutrition specialist, and an advertising agency in its development and implementation. A social marketing approach was used to educate consumers about the hidden sources of dietary sodium, to raise awareness of the adverse health effects of excess sodium intake, to encourage consumers to read food labels, and to urge them to purchase food items lower in sodium. The lessons learned from this experience may be of assistance to other communities that seek to implement similar sodium-reduction strategies in the grocery store environment.

Minimising food waste: a call for multidisciplinary research.

PubMed

Alamar, Maria Del Carmen; Falagán, Natalia; Aktas, Emel; Terry, Leon A

2018-01-01

Food losses and waste have always been a significant global problem for mankind, and one which has become increasingly recognised as such by policy makers, food producers, processors, retailers, and consumers. It is, however, an emotive subject whereby the extent, accuracy and resolution of available data on postharvest loss and waste are questionable, such that key performance indicators on waste can be misinformed. The nature and extent of food waste differ among developed economies, economies in transition and developing countries. While most emphasis has been put on increasing future crop production, far less resource has been and is still channelled towards enabling both established and innovative food preservation technologies to reduce food waste while maintaining safety and quality. Reducing food loss and waste is a more tractable problem than increasing production in the short to medium term, as its solution is not directly limited, for instance, by available land and water resources. Here we argue the need for a paradigm shift of current funding strategies and research programmes that will encourage the development, implementation and translation of collective biological, engineering and management solutions to better preserve and utilise food. Such multidisciplinary thinking across global supply chains is an essential element in the pursuit of achieving sustainable food and nutritional security. The implementation of allied technological and management solutions is reliant on there being sufficient skilled human capital and resources. There is currently a lack of robust postharvest research networks outside of the developed world, and insufficient global funding mechanisms that can support such interdisciplinary collaborations. There is, thus, a collective need for schemes that encourage inter-supply chain research, knowledge exchange and capacity building to reduce food losses and waste. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Wicked Problem Solvers.

PubMed

Edmondson, Amy C

2016-06-01

Companies today increasingly rely on teams that span many industries for radical innovation, especially to solve "wicked problems." So leaders have to understand how to promote collaboration when roles are uncertain, goals are shifting, expertise and organizational cultures are varied, and participants have clashing or even antagonistic perspectives. HBS professor Amy Edmondson has studied more than a dozen cross-industry innovation projects, among them the creation of a new city, a mango supply-chain transformation, and the design and construction of leading-edge buildings. She has identified the leadership practices that make successful cross-industry teams work: fostering an adaptable vision, promoting psychological safety, enabling knowledge sharing, and encouraging collaborative innovation. Though these practices are broadly familiar, their application within cross-industry teams calls for unique leadership approaches that combine flexibility, open-mindedness, humility, and fierce resolve.

Collaborative Computer Graphics Product Development between Academia and Government: A Dynamic Model

NASA Technical Reports Server (NTRS)

Fowler, Deborah R.; Kostis, Helen-Nicole

2016-01-01

Collaborations and partnerships between academia and government agencies are common, especially when it comes to research and development in the fields of science, engineering and technology. However, collaboration between a government agency and an art school is rather atypical. This paper presents the Collaborative Student Project, which aims to explore the following challenge: The ideation, development and realization of education and public outreach products for NASAs upcoming ICESat-2 mission in collaboration with art students.

Exploring Bioeconomy Growth through the Public Release of the Biomass Scenario Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newes, Emily K; Biddy, Mary J; Bush, Brian W

The Biomass Scenario Model (BSM) is an important tool for exploring vibrant future bioeconomy scenarios that leverage domestic resources. Developed by NREL and BETO, this model of the domestic biofuels supply chain has been used to explore success strategies for BETO's activities towards bioeconomy growth. The BSM offers a robust test bed for detailed exploration of effects of BETO activities within the complex context of resource availability; physical, technological, and economic constraints; behavior; and policy. The public release of the model in 2017 will allow broad engagement with the theme of the conference as model users can analyze bioeconomy growth,more » domestic biomass resource use, and associated effects. The BSM is a carefully validated, state-of-the-art, dynamic model of the biomass to biofuels supply chain. Using a system dynamics simulation modeling approach, the model tracks long-term deployment of biofuels given technology development and investment, considering land availability, the competing oil market, consumer demand, and government policies over time. Sample outputs include biofuels production, feedstock use, capital investment, incentives, and costs of feedstocks and fuels. BSM scenarios reveal technological, economic, and policy challenges, as well as opportunities for dynamic growth of the bioeconomy with strategic public and private investment at key points in the system. The model logic and results have been reviewed extensively, through collaborative analysis, expert reviews and external publications (https://www.zotero.org/groups/bsm_publications/).« less

NEON's eddy-covariance: interoperable flux data products, software and services for you, now

NASA Astrophysics Data System (ADS)

Metzger, S.; Desai, A. R.; Durden, D.; Hartmann, J.; Li, J.; Luo, H.; Durden, N. P.; Sachs, T.; Serafimovich, A.; Sturtevant, C.; Xu, K.

2017-12-01

Networks of eddy-covariance (EC) towers such as AmeriFlux, ICOS and NEON are vital for providing the necessary distributed observations to address interactions at the soil-vegetation-atmosphere interface. NEON, close to full operation with 47 tower sites, will represent the largest single-provider EC network globally. Its standardized observation and data processing suite is designed specifically for inter-site comparability and analysis of feedbacks across multiple spatial and temporal scales. Furthermore, NEON coordinates EC with rich contextual observations such as airborne remote sensing and in-situ sampling bouts. In January 2018 NEON enters its operational phase, and EC data products, software and services become fully available to the science community at large. These resources strive to incorporate lessons-learned through collaborations with AmeriFlux, ICOS, LTER and others, to suggest novel systemic solutions, and to synergize ongoing research efforts across science communities. Here, we present an overview of the ongoing product release, alongside efforts to integrate and collaborate with existing infrastructures, networks and communities. Near-real-time heat, water and carbon cycle observations in "basic" and "expanded", self-describing HDF5 formats become accessible from the NEON Data Portal, including an Application Program Interface. Subsequently, they are ingested into the AmeriFlux processing pipeline, together with inclusion in FLUXNET globally harmonized data releases. Software for reproducible, extensible and portable data analysis and science operations management also becomes available. This includes the eddy4R family of R-packages underlying the data product generation, together with the ability to directly participate in open development via GitHub version control and DockerHub image hosting. In addition, templates for science operations management include a web-based field maintenance application and a graphical user interface to simplify problem tracking and resolution along the entire data chain. We hope that this presentation can initiate further collaboration and synergies in challenge areas, and would appreciate input and discussion on continued development.

Process Improvement for Interinstitutional Research Contracting

PubMed Central

Logan, Jennifer; Bjorklund, Todd; Whitfield, Jesse; Reed, Peggy; Lesher, Laurie; Sikalis, Amy; Brown, Brent; Drollinger, Sandy; Larrabee, Kristine; Thompson, Kristie; Clark, Erin; Workman, Michael; Boi, Luca

2015-01-01

Abstract Introduction Sponsored research increasingly requires multiinstitutional collaboration. However, research contracting procedures have become more complicated and time consuming. The perinatal research units of two colocated healthcare systems sought to improve their research contracting processes. Methods The Lean Process, a management practice that iteratively involves team members in root cause analyses and process improvement, was applied to the research contracting process, initially using Process Mapping and then developing Problem Solving Reports. Results Root cause analyses revealed that the longest delays were the individual contract legal negotiations. In addition, the “business entity” was the research support personnel of both healthcare systems whose “customers” were investigators attempting to conduct interinstitutional research. Development of mutually acceptable research contract templates and language, chain of custody templates, and process development and refinement formats decreased the Notice of Grant Award to Purchase Order time from a mean of 103.5 days in the year prior to Lean Process implementation to 45.8 days in the year after implementation (p = 0.004). Conclusions The Lean Process can be applied to interinstitutional research contracting with significant improvement in contract implementation. PMID:26083433

Process Improvement for Interinstitutional Research Contracting.

PubMed

Varner, Michael; Logan, Jennifer; Bjorklund, Todd; Whitfield, Jesse; Reed, Peggy; Lesher, Laurie; Sikalis, Amy; Brown, Brent; Drollinger, Sandy; Larrabee, Kristine; Thompson, Kristie; Clark, Erin; Workman, Michael; Boi, Luca

2015-08-01

Sponsored research increasingly requires multiinstitutional collaboration. However, research contracting procedures have become more complicated and time consuming. The perinatal research units of two colocated healthcare systems sought to improve their research contracting processes. The Lean Process, a management practice that iteratively involves team members in root cause analyses and process improvement, was applied to the research contracting process, initially using Process Mapping and then developing Problem Solving Reports. Root cause analyses revealed that the longest delays were the individual contract legal negotiations. In addition, the "business entity" was the research support personnel of both healthcare systems whose "customers" were investigators attempting to conduct interinstitutional research. Development of mutually acceptable research contract templates and language, chain of custody templates, and process development and refinement formats decreased the Notice of Grant Award to Purchase Order time from a mean of 103.5 days in the year prior to Lean Process implementation to 45.8 days in the year after implementation (p = 0.004). The Lean Process can be applied to interinstitutional research contracting with significant improvement in contract implementation. © 2015 Wiley Periodicals, Inc.

Improving healthcare value through clinical community and supply chain collaboration.

PubMed

Ishii, Lisa; Demski, Renee; Ken Lee, K H; Mustafa, Zishan; Frank, Steve; Wolisnky, Jean Paul; Cohen, David; Khanna, Jay; Ammerman, Joshua; Khanuja, Harpal S; Unger, Anthony S; Gould, Lois; Wachter, Patricia Ann; Stearns, Lauren; Werthman, Ronald; Pronovost, Peter

2017-03-01

We hypothesized that integrating supply chain with clinical communities would allow for clinician-led supply cost reduction and improved value in an academic health system. Three clinical communities (spine, joint, blood management) and one clinical community-like physician led team of surgeon stakeholders partnered with the supply chain team on specific supply cost initiatives. The teams reviewed their specific utilization and cost data, and the physicians led consensus-building conversations over a series of team meetings to agree to standard supply utilization. The spine and joint clinical communities each agreed upon a vendor capping model that led to cost savings of $3 million dollars and $1.5 million dollars respectively. The blood management decreased blood product utilization and achieved $1.2 million dollars savings. $5.6 million dollars in savings was achieved by a clinical community-like group of surgeon stakeholders through standardization of sutures and endomechanicals. Physician led clinical teams empowered to lead change achieved substantial supply chain cost savings in an academic health system. The model of combining clinical communities with supply chain offers hope for an effective, practical, and scalable approach to improving value and engaging physicians in other academic health systems. This clinician led model could benefit both private and academic health systems engaging in value optimization efforts. N/A. Copyright © 2016 Elsevier Inc. All rights reserved.

Counterfeit Electronic Parts Controls in the Department of Defense Supply Chain

DTIC Science & Technology

2015-06-01

Equipment Manufacturer RFID Radio Frequency Identification SASC Senate Armed Services Committee SECDEF Secretary of Defense SWPaC Space, Weight...radio frequency identification ( RFID ). Upon the use of that printer, the RFID is checked to ensure it is a valid platform, and will not work if the... RFID is not confirmed to be valid (Richetto, 2011). Greater collaboration with industry would also help with one of the primary drivers of

A Case Study of the Degree of Collaboration Between Various Levels in the Reparable Chain in the United States Air Force

DTIC Science & Technology

2005-03-01

qualitative research methods , a case study approach was selected to conduct this research . “A case study can be defined as an empirical study ... qualitative in nature, and also described the qualitative research method chosen as a case study . From 49 there, data collection was focused upon... qualitative nature of the research , a qualitative design was used to conduct the

The business case for transitioning to safer chemicals.

PubMed

McFadden, Roger D

2011-01-01

Emerging domestic and international chemical regulations and a heightened consumer awareness of chemicals of concern in products is challenging American businesses to reevaluate and reconsider their approaches to supply chain management and product design. Some of these companies recognize business opportunities and are responding proactively with innovative strategies and tactics. This article describes steps that Staples Inc., the world's largest office products provider, is taking to meet demand for products that are safer and more sustainable. In trying to meet the demand for safer products, Staples faces significant barriers, including the complexity of supply chains, data gaps, and confidential business information. New collaborations between companies, government, and advocates, and improved tools and criteria for defining safer products enhance the ability of businesses, like Staples, to meet new consumer demands.

Communication, Collaboration, and Enhancing the Learning Experience: Developing a Collaborative Virtual Enquiry Service in University Libraries in the North of England

ERIC Educational Resources Information Center

Jolly, Liz; White, Sue

2016-01-01

This article uses the case study of developing a collaborative "out-of-hours" virtual enquiry service by members of the Northern Collaboration Group of academic libraries in the north of England to explore the importance of communication and collaboration between academic library services in enhancing student learning. Set within the…

Collaborative Mother-Toddler Communication and Theory of Mind Development at Age 4

PubMed Central

Sung, Jihyun; Hsu, Hui-Chin

2014-01-01

Focusing on social pragmatics, this longitudinal study investigated the contribution of mother-toddler collaborative communication to theory of mind (ToM) development at age 4. At age 2½, 78 toddlers’ (42 boys) and their mothers were observed during pretend play. At age 4, children were tested using 4 false belief understanding tasks. Both mothers and toddlers engaged in more collaborative (inform, guide/request, and support/confirm) than non-collaborative communication acts. Other-focused collaborative acts of support/confirm by mothers and toddlers predicted children’s false belief understanding, even after controlling for 5 covariates. In addition, as active agents in their own ToM development, the contribution of toddlers’ collaborative acts to false belief understanding was independent of their mothers. Finally, the way toddlers and their mothers co-constructing their communication mattered. Only when toddlers engaged in high levels of collaborative acts, the mothers’ high levels of collaborative acts demonstrated a positive effect on children’s ToM development. The applied implications of these findings were discussed. PMID:25132699

Collaboration between general practitioners and mental health care professionals: a qualitative study.

PubMed

Fredheim, Terje; Danbolt, Lars J; Haavet, Ole R; Kjønsberg, Kari; Lien, Lars

2011-05-23

Collaboration between general practice and mental health care has been recognised as necessary to provide good quality healthcare services to people with mental health problems. Several studies indicate that collaboration often is poor, with the result that patient' needs for coordinated services are not sufficiently met, and that resources are inefficiently used. An increasing number of mental health care workers should improve mental health services, but may complicate collaboration and coordination between mental health workers and other professionals in the treatment chain. The aim of this qualitative study is to investigate strengths and weaknesses in today's collaboration, and to suggest improvements in the interaction between General Practitioners (GPs) and specialised mental health service. This paper presents a qualitative focus group study with data drawn from six groups and eight group sessions with 28 health professionals (10 GPs, 12 nurses, and 6 physicians doing post-doctoral training in psychiatry), all working in the same region and assumed to make professional contact with each other. GPs and mental health professionals shared each others expressions of strengths, weaknesses and suggestions for improvement in today's collaboration. Strengths in today's collaboration were related to common consultations between GPs and mental health professionals, and when GPs were able to receive advice about diagnostic treatment dilemmas. Weaknesses were related to the GPs' possibility to meet mental health professionals, and lack of mutual knowledge in mental health services. The results describe experiences and importance of interpersonal knowledge, mutual accessibility and familiarity with existing systems and resources. There is an agreement between GPs and mental health professionals that services will improve with shared knowledge about patients through systematic collaborative services, direct cell-phone lines to mental health professionals and allocated times for telephone consultation. GPs and mental health professionals experience collaboration as important. GPs are the gate-keepers to specialised health care, and lack of collaboration seems to create problems for GPs, mental health professionals, and for the patients. Suggestions for improvement included identification of situations that could increase mutual knowledge, and make it easier for GPs to reach the right mental health care professional when needed.

Collaborating internationally on physician leadership development: why now?

PubMed

Chan, Ming-Ka; de Camps Meschino, Diane; Dath, Deepak; Busari, Jamiu; Bohnen, Jordan David; Samson, Lindy Michelle; Matlow, Anne; Sánchez-Mendiola, Melchor

2016-07-04

Purpose This paper aims to highlight the importance of leadership development for all physicians within a competency-based medical education (CBME) framework. It describes the importance of timely international collaboration as a key strategy in promoting physician leadership development. Design/methodology/approach The paper explores published and Grey literature around physician leadership development and proposes that international collaboration will meet the expanding call for development of leadership competencies in postgraduate medical learners. Two grounding frameworks were used: complexity science supports adding physician leadership training to the current momentum of CBME adoption, and relational cultural theory supports the engagement of diverse stakeholders in multiple jurisdictions around the world to ensure inclusivity in leadership education development. Findings An international collaborative identified key insights regarding the need to frame physician leadership education within a competency-based model. Practical implications International collaboration can be a vehicle for developing a globally relevant, generalizable physician leadership curriculum. This model can be expanded to encourage innovation, scholarship and program evaluation. Originality/value A competency-based leadership development curriculum is being designed by an international collaborative. The curriculum is based on established leadership and education frameworks. The international collaboration model provides opportunities for ongoing sharing, networking and diversification.

Collaborative Professional Development in Higher Education: Developing Knowledge of Technology Enhanced Teaching

ERIC Educational Resources Information Center

Jaipal-Jamani, Kamini; Figg, Candace; Gallagher, Tiffany; Scott, Ruth McQuirter; Ciampa, Katia

2015-01-01

This paper describes a professional development initiative for teacher educators, called the "Digital Pedagogies Collaboration," in which the goal was to build faculty knowledge about technology enhanced teaching (TPACK knowledge), develop a collaborative learning and research community of faculty members around technology enhanced…

Self-Consistent Field Theories for the Role of Large Length-Scale Architecture in Polymers

NASA Astrophysics Data System (ADS)

Wu, David

At large length-scales, the architecture of polymers can be described by a coarse-grained specification of the distribution of branch points and monomer types within a molecule. This includes molecular topology (e.g., cyclic or branched) as well as distances between branch points or chain ends. Design of large length-scale molecular architecture is appealing because it offers a universal strategy, independent of monomer chemistry, to tune properties. Non-linear analogs of linear chains differ in molecular-scale properties, such as mobility, entanglements, and surface segregation in blends that are well-known to impact rheological, dynamical, thermodynamic and surface properties including adhesion and wetting. We have used Self-Consistent Field (SCF) theories to describe a number of phenomena associated with large length-scale polymer architecture. We have predicted the surface composition profiles of non-linear chains in blends with linear chains. These predictions are in good agreement with experimental results, including from neutron scattering, on a range of well-controlled branched (star, pom-pom and end-branched) and cyclic polymer architectures. Moreover, the theory allows explanation of the segregation and conformations of branched polymers in terms of effective surface potentials acting on the end and branch groups. However, for cyclic chains, which have no end or junction points, a qualitatively different topological mechanism based on conformational entropy drives cyclic chains to a surface, consistent with recent neutron reflectivity experiments. We have also used SCF theory to calculate intramolecular and intermolecular correlations for polymer chains in the bulk, dilute solution, and trapped at a liquid-liquid interface. Predictions of chain swelling in dilute star polymer solutions compare favorably with existing PRISM theory and swelling at an interface helps explain recent measurements of chain mobility at an oil-water interface. In collaboration with: Renfeng Hu, Colorado School of Mines, and Mark Foster, University of Akron. This work was supported by NSF Grants No. CBET- 0730692 and No. CBET-0731319.

Design of Scalable and Effective Earth Science Collaboration Tool

NASA Astrophysics Data System (ADS)

Maskey, M.; Ramachandran, R.; Kuo, K. S.; Lynnes, C.; Niamsuwan, N.; Chidambaram, C.

2014-12-01

Collaborative research is growing rapidly. Many tools including IDEs are now beginning to incorporate new collaborative features. Software engineering research has shown the effectiveness of collaborative programming and analysis. In particular, drastic reduction in software development time resulting in reduced cost has been highlighted. Recently, we have witnessed the rise of applications that allow users to share their content. Most of these applications scale such collaboration using cloud technologies. Earth science research needs to adopt collaboration technologies to reduce redundancy, cut cost, expand knowledgebase, and scale research experiments. To address these needs, we developed the Earth science collaboration workbench (CWB). CWB provides researchers with various collaboration features by augmenting their existing analysis tools to minimize learning curve. During the development of the CWB, we understood that Earth science collaboration tasks are varied and we concluded that it is not possible to design a tool that serves all collaboration purposes. We adopted a mix of synchronous and asynchronous sharing methods that can be used to perform collaboration across time and location dimensions. We have used cloud technology for scaling the collaboration. Cloud has been highly utilized and valuable tool for Earth science researchers. Among other usages, cloud is used for sharing research results, Earth science data, and virtual machine images; allowing CWB to create and maintain research environments and networks to enhance collaboration between researchers. Furthermore, collaborative versioning tool, Git, is integrated into CWB for versioning of science artifacts. In this paper, we present our experience in designing and implementing the CWB. We will also discuss the integration of collaborative code development use cases for data search and discovery using NASA DAAC and simulation of satellite observations using NASA Earth Observing System Simulation Suite (NEOS3).

Collaborative Learning and Competence Development in School Health Nursing

ERIC Educational Resources Information Center

Nordentoft, Helle Merete; Wistoft, Karen

2012-01-01

Purpose: The purpose of this paper is to investigate the process and learning outcomes of peer collaboration in a Danish health developmental project in school health nursing. The paper explores how peer collaboration influences the school nurses' collaborative learning and competence development. Design/methodology/approach: The article is based…

Developing a Biostatistical Collaboration Course in a Health Science Research Methodology Program

ERIC Educational Resources Information Center

Thabane, Lehana; Walter, Stephen D.; Hanna, Steven; Goldsmith, Charles H.; Pullenayegum, Eleanor

2008-01-01

Effective statistical collaboration in a multidisciplinary health research environment requires skills not taught in the usual statistics courses. Graduates often learn such collaborative skills through trial and error. In this paper, we discuss the development of a biostatistical collaboration course aimed at graduate students in a Health…

Assessment of Interprofessional Team Collaboration Scale (AITCS): Development and Testing of the Instrument

ERIC Educational Resources Information Center

Orchard, Carole A.; King, Gillian A.; Khalili, Hossein; Bezzina, Mary Beth

2012-01-01

Introduction: Many health professionals believe they practice collaboratively. Providing insight into their actual level of collaboration requires a means to assess practice within health settings. This chapter reports on the development, testing, and refinement process for the Assessment of Interprofessional Team Collaboration Scale (AITCS).…

Assessing Learners' Perceived Readiness for Computer-Supported Collaborative Learning (CSCL): A Study on Initial Development and Validation

ERIC Educational Resources Information Center

Xiong, Yao; So, Hyo-Jeong; Toh, Yancy

2015-01-01

The main purpose of this study was to develop an instrument that assesses university students' perceived readiness for computer-supported collaborative learning (CSCL). Assessment in CSCL research had predominantly focused on measuring "after-collaboration" outcomes and "during-collaboration" behaviors while…

75 FR 64731 - Request for Information (RFI) for Consumer Health Initiative To Develop Collaborations That...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... Initiative To Develop Collaborations That Produce Evidence-Based Informatics Resources and Products\\1\\ \\1..., Collaboration, & Quality was convened. This federally sponsored summit aimed to: (1) Convene leaders across... service, and (3) foster collaborations to integrate evidence- based commercial and non-commercial products...

Co-creation and Co-innovation in a Collaborative Networked Environment

NASA Astrophysics Data System (ADS)

Klen, Edmilson Rampazzo

Leveraged by the advances in communication and information Technologies, producers and consumers are developing a new behavior. Together with the new emerging collaborative manifestations this behavior may directly impact the way products are developed. This powerful combination indicates that consumers will be involved in a very early stage in product development processes supporting even more the creation and innovation of products. This new way of collaboration gives rise to a new collaborative networked environment based on co-creation and co-innovation. This work will present some evolutionary steps that point to the development of this environment where prosumer communities and virtual organizations interact and collaborate.

Voluntary Medical Male Circumcision: Logistics, Commodities, and Waste Management Requirements for Scale-Up of Services

PubMed Central

Edgil, Dianna; Stankard, Petra; Forsythe, Steven; Rech, Dino; Chrouser, Kristin; Adamu, Tigistu; Sakallah, Sameer; Thomas, Anne Goldzier; Albertini, Jennifer; Stanton, David; Dickson, Kim Eva; Njeuhmeli, Emmanuel

2011-01-01

Background The global HIV prevention community is implementing voluntary medical male circumcision (VMMC) programs across eastern and southern Africa, with a goal of reaching 80% coverage in adult males by 2015. Successful implementation will depend on the accessibility of commodities essential for VMMC programming and the appropriate allocation of resources to support the VMMC supply chain. For this, the United States President’s Emergency Plan for AIDS Relief, in collaboration with the World Health Organization and the Joint United Nations Programme on HIV/AIDS, has developed a standard list of commodities for VMMC programs. Methods and Findings This list of commodities was used to inform program planning for a 1-y program to circumcise 152,000 adult men in Swaziland. During this process, additional key commodities were identified, expanding the standard list to include commodities for waste management, HIV counseling and testing, and the treatment of sexually transmitted infections. The approximate costs for the procurement of commodities, management of a supply chain, and waste disposal, were determined for the VMMC program in Swaziland using current market prices of goods and services. Previous costing studies of VMMC programs did not capture supply chain costs, nor the full range of commodities needed for VMMC program implementation or waste management. Our calculations indicate that depending upon the volume of services provided, supply chain and waste management, including commodities and associated labor, contribute between US$58.92 and US$73.57 to the cost of performing one adult male circumcision in Swaziland. Conclusions Experience with the VMMC program in Swaziland indicates that supply chain and waste management add approximately US$60 per circumcision, nearly doubling the total per procedure cost estimated previously; these additional costs are used to inform the estimate of per procedure costs modeled by Njeuhmeli et al. in “Voluntary Medical Male Circumcision: Modeling the Impact and Cost of Expanding Male Circumcision for HIV Prevention in Eastern and Southern Africa.” Program planners and policy makers should consider the significant contribution of supply chain and waste management to VMMC program costs as they determine future resource needs for VMMC programs. Please see later in the article for the Editors' Summary PMID:22140363

The Event Chain of Survival in the Context of Music Festivals: A Framework for Improving Outcomes at Major Planned Events.

PubMed

Lund, Adam; Turris, Sheila

2017-08-01

Despite the best efforts of event producers and on-site medical teams, there are sometimes serious illnesses, life-threatening injuries, and fatalities related to music festival attendance. Producers, clinicians, and researchers are actively seeking ways to reduce the mortality and morbidity associated with these events. After analyzing the available literature on music festival health and safety, several major themes emerged. Principally, stakeholder groups planning in isolation from one another (ie, in silos) create fragmentation, gaps, and overlap in plans for major planned events (MPEs). The authors hypothesized that one approach to minimizing this fragmentation may be to create a framework to "connect the dots," or join together the many silos of professionals responsible for safety, security, health, and emergency planning at MPEs. Adapted from the well-established literature regarding the management of cardiac arrests, both in and out of hospital, the "chain of survival" concept is applied to the disparate groups providing services that support event safety in the context of music festivals. The authors propose this framework for describing, understanding, coordinating and planning around the integration of safety, security, health, and emergency service for events. The adapted Event Chain of Survival contains six interdependent links, including: (1) event producers; (2) police and security; (3) festival health; (4) on-site medical services; (5) ambulance services; and (6) off-site medical services. The authors argue that adapting and applying this framework in the context of MPEs in general, and music festivals specifically, has the potential to break down the current disconnected approach to event safety, security, health, and emergency planning. It offers a means of shifting the focus from a purely reactive stance to a more proactive, collaborative, and integrated approach. Improving health outcomes for music festival attendees, reducing gaps in planning, promoting consistency, and improving efficiency by reducing duplication of services will ultimately require coordination and collaboration from the beginning of event production to post-event reporting. Lund A , Turris SA . The Event Chain of Survival in the context of music festivals: a framework for improving outcomes at major planned events. Prehosp Disaster Med. 2017;32(4):437-443.

Mapping soil heterogeneity using RapidEye satellite images

NASA Astrophysics Data System (ADS)

Piccard, Isabelle; Eerens, Herman; Dong, Qinghan; Gobin, Anne; Goffart, Jean-Pierre; Curnel, Yannick; Planchon, Viviane

2016-04-01

In the frame of BELCAM, a project funded by the Belgian Science Policy Office (BELSPO), researchers from UCL, ULg, CRA-W and VITO aim to set up a collaborative system to develop and deliver relevant information for agricultural monitoring in Belgium. The main objective is to develop remote sensing methods and processing chains able to ingest crowd sourcing data, provided by farmers or associated partners, and to deliver in return relevant and up-to-date information for crop monitoring at the field and district level based on Sentinel-1 and -2 satellite imagery. One of the developments within BELCAM concerns an automatic procedure to detect soil heterogeneity within a parcel using optical high resolution images. Such heterogeneity maps can be used to adjust farming practices according to the detected heterogeneity. This heterogeneity may for instance be caused by differences in mineral composition of the soil, organic matter content, soil moisture or soil texture. Local differences in plant growth may be indicative for differences in soil characteristics. As such remote sensing derived vegetation indices may be used to reveal soil heterogeneity. VITO started to delineate homogeneous zones within parcels by analyzing a series of RapidEye images acquired in 2015 (as a precursor for Sentinel-2). Both unsupervised classification (ISODATA, K-means) and segmentation techniques were tested. Heterogeneity maps were generated from images acquired at different moments during the season (13 May, 30 June, 17 July, 31 August, 11 September and 1 November 2015). Tests were performed using blue, green, red, red edge and NIR reflectances separately and using derived indices such as NDVI, fAPAR, CIrededge, NDRE2. The results for selected winter wheat, maize and potato fields were evaluated together with experts from the collaborating agricultural research centers. For a few fields UAV images and/or yield measurements were available for comparison.

Visions of Restoration in Fire-Adapted Forest Landscapes: Lessons from the Collaborative Forest Landscape Restoration Program.

PubMed

Urgenson, Lauren S; Ryan, Clare M; Halpern, Charles B; Bakker, Jonathan D; Belote, R Travis; Franklin, Jerry F; Haugo, Ryan D; Nelson, Cara R; Waltz, Amy E M

2017-02-01

Collaborative approaches to natural resource management are becoming increasingly common on public lands. Negotiating a shared vision for desired conditions is a fundamental task of collaboration and serves as a foundation for developing management objectives and monitoring strategies. We explore the complex socio-ecological processes involved in developing a shared vision for collaborative restoration of fire-adapted forest landscapes. To understand participant perspectives and experiences, we analyzed interviews with 86 respondents from six collaboratives in the western U.S., part of the Collaborative Forest Landscape Restoration Program established to encourage collaborative, science-based restoration on U.S. Forest Service lands. Although forest landscapes and group characteristics vary considerably, collaboratives faced common challenges to developing a shared vision for desired conditions. Three broad categories of challenges emerged: meeting multiple objectives, collaborative capacity and trust, and integrating ecological science and social values in decision-making. Collaborative groups also used common strategies to address these challenges, including some that addressed multiple challenges. These included use of issue-based recommendations, field visits, and landscape-level analysis; obtaining support from local agency leadership, engaging facilitators, and working in smaller groups (sub-groups); and science engagement. Increased understanding of the challenges to, and strategies for, developing a shared vision of desired conditions is critical if other collaboratives are to learn from these efforts.

Visions of Restoration in Fire-Adapted Forest Landscapes: Lessons from the Collaborative Forest Landscape Restoration Program

NASA Astrophysics Data System (ADS)

Urgenson, Lauren S.; Ryan, Clare M.; Halpern, Charles B.; Bakker, Jonathan D.; Belote, R. Travis; Franklin, Jerry F.; Haugo, Ryan D.; Nelson, Cara R.; Waltz, Amy E. M.

2017-02-01

Collaborative approaches to natural resource management are becoming increasingly common on public lands. Negotiating a shared vision for desired conditions is a fundamental task of collaboration and serves as a foundation for developing management objectives and monitoring strategies. We explore the complex socio-ecological processes involved in developing a shared vision for collaborative restoration of fire-adapted forest landscapes. To understand participant perspectives and experiences, we analyzed interviews with 86 respondents from six collaboratives in the western U.S., part of the Collaborative Forest Landscape Restoration Program established to encourage collaborative, science-based restoration on U.S. Forest Service lands. Although forest landscapes and group characteristics vary considerably, collaboratives faced common challenges to developing a shared vision for desired conditions. Three broad categories of challenges emerged: meeting multiple objectives, collaborative capacity and trust, and integrating ecological science and social values in decision-making. Collaborative groups also used common strategies to address these challenges, including some that addressed multiple challenges. These included use of issue-based recommendations, field visits, and landscape-level analysis; obtaining support from local agency leadership, engaging facilitators, and working in smaller groups (sub-groups); and science engagement. Increased understanding of the challenges to, and strategies for, developing a shared vision of desired conditions is critical if other collaboratives are to learn from these efforts.

Forging a novel provider and payer partnership in Wisconsin to compensate pharmacists for quality-driven pharmacy and medication therapy management services.

PubMed

Trapskin, Kari; Johnson, Curtis; Cory, Patrick; Sorum, Sarah; Decker, Chris

2009-01-01

To describe the Wisconsin Pharmacy Quality Collaborative (WPQC), a quality-based network of pharmacies and payers with the common goals of improving medication use and safety, reducing health care costs for payers and patients, and increasing professional recognition and compensation for pharmacist-provided services. Wisconsin between 2006 and 2009. Community (independent, chain, and health-system) pharmacies and private and public health care payers/purchasers with support from the McKesson Corporation. This initiative aligns incentives for pharmacies and payers through implementation of 12 quality-based pharmacy requirements as conditions of pharmacy participation in a practice-advancement pilot. Payers compensate network pharmacies that meet the quality-based requirements for two levels of pharmacy professional services (level 1, intervention-based services; level 2, comprehensive medication review and assessment services). The pilot project is designed to measure the following outcomes: medication-use quality improvements, frequency and types of services provided, drug therapy problems, patient safety, cost savings, identification of factors that facilitate pharmacist participation, and patient satisfaction. The Pharmacy Society of Wisconsin created the WPQC network, which consists of 53 pharmacies, 106 trained pharmacists, 45 student pharmacists, 6 pharmacy technicians, and 2 initial payers. A quality assurance process is followed approximately quarterly to audit the 12 network quality requirements. An evaluation of this collaboration is being conducted. This program demonstrates that collaboration among payers and pharmacists is possible and can result in the development of an incentive-aligned program that stresses quality patient care, standardized services, and professional service compensation for pharmacists. This combination of a quality-based credentialing process with a professional services reimbursement schedule is unique and has the promise to enhance the ambulatory pharmacy practice model.

Recent progress of RD53 Collaboration towards next generation Pixel Read-Out Chip for HL-LHC

DOE PAGES

Demaria, N.

2016-12-21

This paper is a review of recent progress of RD53 Collaboration. Results obtained on the study of the radiation effects on 65 nm CMOS have matured enough to define first strategies to adopt in the design of analog and digital circuits. Critical building blocks and analog very front end chains have been designed, tested before and after 5–800 Mrad. Small prototypes of 64×64 pixels with complex digital architectures have been produced, and point to address the main issues of dealing with extremely high pixel rates, while operating at very small in-time thresholds in the analog front end. Lastly, the collaborationmore » is now proceeding at full speed towards the design of a large scale prototype, called RD53A, in 65 nm CMOS technology.« less

"The Three Hags and Pocohontas": How Collaboration Develops Early Years Writing Skills

ERIC Educational Resources Information Center

Boyle, Bill; Charles, Marie

2011-01-01

This article relates a child's development in story writing and the progress that she made in achieving text cohesion, spelling development and ideation through the collaborative process. The case study investigates the integration of major aspects of writing development such as collaboration, the importance of peer interactions through social…

Learning Management Systems: Practical Considerations for the Selection and Implementation of an E-learning Platform for the Navy

DTIC Science & Technology

2007-01-28

is interested in B2B and B2C e-commerce, enterprise resource planning, e-procurement, supply-chain management, data mining, and knowledge discovery... social networking tools, collaborative spaces, knowledge management, “connecting-enabling” protocols like RSS, and other tools. The intent of the ILE...delivered to them, what learning pedagogy is appropriate for them, the optimal level of social interaction for learning, and available resources

Reflections on Developing Collaborative Research in Pediatric Psychology: Implications and Future Directions

PubMed Central

2013-01-01

Objectives Collaborative research with pediatric colleagues has become increasingly important in the professional agenda of pediatric psychology, and there is a continuing need to articulate the challenges of such research. To address this need, this article describes types of collaborative research, reasons for collaboration, collaborative process, challenges, and strategies to facilitate collaborative research. Methods Experiences and lessons learned over the course of a career in collaborative research are described. Results Challenges in collaborative research can be overcome by effective strategies of engagement and communication. Useful methods of training researchers in collaborative research include modeling and supervised mentored experiences in research initiated by trainees. Conclusion Data are needed to identify the characteristics of successful collaborative research, strategies to promote effective research, and methods of training and career development. PMID:23671060

Professional Learning: A Collaborative Model for Online Teaching and Development

ERIC Educational Resources Information Center

Bowser, Audrey; Davis, Kimberley; Singleton, Jacques; Small, Topeka

2017-01-01

This article examined a unique collaborative initiative between a team of graduate level faculty to improve the quality of course development and delivery using a collaborative review process. The collaborative review of teaching has become a widely accepted means for assuring quality distance learning coursework and for the purpose of evaluating…

Toward the Development of Socio-Metacognitive Expertise: An Approach to Developing Collaborative Competence

ERIC Educational Resources Information Center

Borge, Marcela; White, Barbara

2016-01-01

We proposed and evaluated an instructional framework for increasing students' ability to understand and regulate collaborative interactions called Co-Regulated Collaborative Learning (CRCL). In this instantiation of CRCL, models of collaborative competence were articulated through a set of socio-metacognitive roles. Our population consisted of 28…

An Intervention Framework Designed to Develop the Collaborative Problem-Solving Skills of Primary School Students

ERIC Educational Resources Information Center

Gu, Xiaoqing; Chen, Shan; Zhu, Wenbo; Lin, Lin

2015-01-01

Considerable effort has been invested in innovative learning practices such as collaborative inquiry. Collaborative problem solving is becoming popular in school settings, but there is limited knowledge on how to develop skills crucial in collaborative problem solving in students. Based on the intervention design in social interaction of…

FINAL TECHNICAL REPORT FOR FORESTRY BIOFUEL STATEWIDE COLLABORATION CENTER (MICHIGAN)

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaCourt, Donna M.; Miller, Raymond O.; Shonnard, David R.

A team composed of scientists from Michigan State University (MSU) and Michigan Technological University (MTU) assembled to better understand, document, and improve systems for using forest-based biomass feedstocks in the production of energy products within Michigan. Work was funded by a grant (DE-EE-0000280) from the U.S. Department of Energy (DOE) and was administered by the Michigan Economic Development Corporation (MEDC). The goal of the project was to improve the forest feedstock supply infrastructure to sustainably provide woody biomass for biofuel production in Michigan over the long-term. Work was divided into four broad areas with associated objectives: • TASK A: Developmore » a Forest-Based Biomass Assessment for Michigan – Define forest-based feedstock inventory, availability, and the potential of forest-based feedstock to support state and federal renewable energy goals while maintaining current uses. • TASK B: Improve Harvesting, Processing and Transportation Systems – Identify and develop cost, energy, and carbon efficient harvesting, processing and transportation systems. • TASK C: Improve Forest Feedstock Productivity and Sustainability – Identify and develop sustainable feedstock production systems through the establishment and monitoring of a statewide network of field trials in forests and energy plantations. • TASK D: Engage Stakeholders – Increase understanding of forest biomass production systems for biofuels by a broad range of stakeholders. The goal and objectives of this research and development project were fulfilled with key model deliverables including: 1) The Forest Biomass Inventory System (Sub-task A1) of feedstock inventory and availability and, 2) The Supply Chain Model (Sub-task B2). Both models are vital to Michigan’s forest biomass industry and support forecasting delivered cost, as well as carbon and energy balance. All of these elements are important to facilitate investor, operational and policy decisions. All other sub-tasks supported the development of these two tools either directly or by building out supporting information in the forest biomass supply chain. Outreach efforts have, and are continuing to get these user friendly models and information to decision makers to support biomass feedstock supply chain decisions across the areas of biomass inventory and availability, procurement, harvest, forwarding, transportation and processing. Outreach will continue on the project website at http://www.michiganforestbiofuels.org/ and http://www.michiganwoodbiofuels.org/« less

From single magnetic adatoms on superconductors to coupled spin chains

NASA Astrophysics Data System (ADS)

Franke, Katharina J.

Magnetic adsorbates on conventional s-wave superconductors lead to exchange interactions that induce Yu-Shiba-Rusinov (YSR) states inside the superconducting energy gap. Here, we employ tunneling spectroscopy at 1.1 K to investigate magnetic atoms and chains on superconducting Pb surfaces. We show that individual Manganese (Mn) atoms give rise to a distinct number of YSR-states. The single-atom junctions are stable over several orders of magnitude in conductance. We identify single-electron tunneling as well as Andreev processes. When the atoms are brought into sufficiently close distance, the Shiba states hybridize, thus giving rise to states with bonding and anti-bonding character. It has been shown that the Pb(110) surface supports the self-assembly of Fe chains, which exhibit fingerprints of Majorana bound states. Using superconducting tips, we resolve a rich subgap structure including peaks at zero energy and low-energy resonances, which overlap with the putative Majorana states. We gratefully acknowledge funding by the Deutsche Forschungsgemeinschaft through collaborative research Grant Sfb 658, and through Grant FR2726/4, as well by the European Research Council through Consolidator Grant NanoSpin.

A Complete Readout Chain of the ATLAS Tile Calorimeter for the HL-LHC: from FATALIC Front-End Electronics to Signal Reconstruction

NASA Astrophysics Data System (ADS)

Senkin, Sergey

2018-01-01

The ATLAS Collaboration has started a vast programme of upgrades in the context of high-luminosity LHC (HL-LHC) foreseen in 2024. We present here one of the frontend readout options, an ASIC called FATALIC, proposed for the high-luminosity phase LHC upgrade of the ATLAS Tile Calorimeter. Based on a 130 nm CMOS technology, FATALIC performs the complete signal processing, including amplification, shaping and digitisation. We describe the full characterisation of FATALIC and also the Optimal Filtering signal reconstruction method adapted to fully exploit the FATALIC three-range layout. Additionally we present the resolution performance of the whole chain measured using the charge injection system designed for calibration. Finally we discuss the results of the signal reconstruction used on real data collected during a preliminary beam test at CERN.

The Development of an Inspirational Leadership Workshop: An Academic-Practitioner Collaboration

ERIC Educational Resources Information Center

Hite, Dwight M.; Nandedkar, Ankur; Mercer, Jenna; Martin, Warren

2014-01-01

All too often leadership programs are developed in relative isolation; that is, they tend to be either academic or practitioner in nature. Arguably, much more effective leadership programs are possible through collaboration between academics and practitioners. This application brief describes one such successful collaboration to develop an…

Academic Developers and International Collaborations: The Importance of Personal Abilities and Aptitudes

ERIC Educational Resources Information Center

Willis, Ian; Strivens, Janet

2015-01-01

Academic developers are increasingly involved in international collaborations in learning and teaching. Many factors contribute to successful collaborations; we argue that the personal abilities and aptitudes of academic developers are one key element. Building trust and relationships are central to creating the networks at individual, group, and…

Everyone Learns from Everyone: Collaborative and Interdisciplinary Professional Development in Digital Literacy

ERIC Educational Resources Information Center

Hobbs, Renee; Coiro, Julie

2016-01-01

Hobbs and Coiro describe a new approach to the professional development of educators, librarians, and media professionals that emphasizes the value of collaborative, interdisciplinary relationships. The authors explore why creative collaboration using digital media texts, tools, and technologies is vital to support the professional development of…

Assessing collaborative computing: development of the Collaborative-Computing Observation Instrument (C-COI)

NASA Astrophysics Data System (ADS)

Israel, Maya; Wherfel, Quentin M.; Shehab, Saadeddine; Ramos, Evan A.; Metzger, Adam; Reese, George C.

2016-07-01

This paper describes the development, validation, and uses of the Collaborative Computing Observation Instrument (C-COI), a web-based analysis instrument that classifies individual and/or collaborative behaviors of students during computing problem-solving (e.g. coding, programming). The C-COI analyzes data gathered through video and audio screen recording software that captures students' computer screens as they program, and their conversations with their peers or adults. The instrument allows researchers to organize and quantify these data to track behavioral patterns that could be further analyzed for deeper understanding of persistence and/or collaborative interactions. The article provides a rationale for the C-COI including the development of a theoretical framework for measuring collaborative interactions in computer-mediated environments. This theoretical framework relied on the computer-supported collaborative learning literature related to adaptive help seeking, the joint problem-solving space in which collaborative computing occurs, and conversations related to outcomes and products of computational activities. Instrument development and validation also included ongoing advisory board feedback from experts in computer science, collaborative learning, and K-12 computing as well as classroom observations to test out the constructs in the C-COI. These processes resulted in an instrument with rigorous validation procedures and a high inter-rater reliability.

Prayer Camps and Biomedical Care in Ghana: Is Collaboration in Mental Health Care Possible?

PubMed

Arias, Daniel; Taylor, Lauren; Ofori-Atta, Angela; Bradley, Elizabeth H

2016-01-01

Experts have suggested that intersectoral partnerships between prayer camps and biomedical care providers may be an effective strategy to address the overwhelming shortage of mental health care workers in Africa and other low-income settings. Nevertheless, previous studies have not explored whether the prayer camp and biomedical staff beliefs and practices provide sufficient common ground to enable cooperative relationships. Therefore, we sought to examine the beliefs and practices of prayer camp staff and the perspective of biomedical care providers, with the goal of characterizing interest in-and potential for-intersectoral partnership between prayer camp staff and biomedical care providers. We conducted 50 open-ended, semi-structured interviews with prophets and staff at nine Christian prayer camps in Ghana, and with staff within Ghana's three public psychiatric hospitals. We used the purposive sampling method to recruit participants and the constant comparative method for qualitative data analysis. Prayer camp staff expressed interest in collaboration with biomedical mental health care providers, particularly if partnerships could provide technical support introducing medications in the prayer camp and address key shortcomings in their infrastructure and hygienic conditions. Nevertheless, challenges for collaboration were apparent as prayer camp staff expressed strong beliefs in a spiritual rather than biomedical explanatory model for mental illness, frequently used fasting and chained restraints in the course of treatment, and endorsed only short-term use of medication to treat mental illness-expressing concerns that long-term medication regimens masked underlying spiritual causes of illness. Biomedical providers were skeptical about the spiritual interpretations of mental illness held by faith healers, and were concerned by the use of chains, fasting, and the lack of adequate living facilities for patients in prayer camps; many, however, expressed interest in engaging with prayer camps to expand access to clinical care for patients residing in the camps. The findings demonstrate that biomedical care providers are interested in engaging with prayer camps. Key areas where partnerships may best improve conditions for patients at prayer camps include collaborating on creating safe and secure physical spaces and delivering medication for mental illness to patients living in prayer camps. However, while prayer camp staff are willing to engage biomedical knowledge, deeply held beliefs and routine practices of faith and biomedical healers are difficult to reconcile Additional discussion is needed to find the common ground on which the scarce resources for mental health care in Ghana can collaborate most effectively.

Prayer Camps and Biomedical Care in Ghana: Is Collaboration in Mental Health Care Possible?

PubMed Central

Arias, Daniel; Taylor, Lauren; Ofori-Atta, Angela; Bradley, Elizabeth H.

2016-01-01

Background Experts have suggested that intersectoral partnerships between prayer camps and biomedical care providers may be an effective strategy to address the overwhelming shortage of mental health care workers in Africa and other low-income settings. Nevertheless, previous studies have not explored whether the prayer camp and biomedical staff beliefs and practices provide sufficient common ground to enable cooperative relationships. Therefore, we sought to examine the beliefs and practices of prayer camp staff and the perspective of biomedical care providers, with the goal of characterizing interest in—and potential for—intersectoral partnership between prayer camp staff and biomedical care providers. Methods We conducted 50 open-ended, semi-structured interviews with prophets and staff at nine Christian prayer camps in Ghana, and with staff within Ghana’s three public psychiatric hospitals. We used the purposive sampling method to recruit participants and the constant comparative method for qualitative data analysis. Results Prayer camp staff expressed interest in collaboration with biomedical mental health care providers, particularly if partnerships could provide technical support introducing medications in the prayer camp and address key shortcomings in their infrastructure and hygienic conditions. Nevertheless, challenges for collaboration were apparent as prayer camp staff expressed strong beliefs in a spiritual rather than biomedical explanatory model for mental illness, frequently used fasting and chained restraints in the course of treatment, and endorsed only short-term use of medication to treat mental illness—expressing concerns that long-term medication regimens masked underlying spiritual causes of illness. Biomedical providers were skeptical about the spiritual interpretations of mental illness held by faith healers, and were concerned by the use of chains, fasting, and the lack of adequate living facilities for patients in prayer camps; many, however, expressed interest in engaging with prayer camps to expand access to clinical care for patients residing in the camps. Conclusions The findings demonstrate that biomedical care providers are interested in engaging with prayer camps. Key areas where partnerships may best improve conditions for patients at prayer camps include collaborating on creating safe and secure physical spaces and delivering medication for mental illness to patients living in prayer camps. However, while prayer camp staff are willing to engage biomedical knowledge, deeply held beliefs and routine practices of faith and biomedical healers are difficult to reconcile Additional discussion is needed to find the common ground on which the scarce resources for mental health care in Ghana can collaborate most effectively. PMID:27618551

Setting up spaces for collaboration in industry between researchers from the natural and social sciences.

PubMed

Flipse, Steven M; van der Sanden, Maarten C A; Osseweijer, Patricia

2014-03-01

Policy makers call upon researchers from the natural and social sciences to collaborate for the responsible development and deployment of innovations. Collaborations are projected to enhance both the technical quality of innovations, and the extent to which relevant social and ethical considerations are integrated into their development. This could make these innovations more socially robust and responsible, particularly in new and emerging scientific and technological fields, such as synthetic biology and nanotechnology. Some researchers from both fields have embarked on collaborative research activities, using various Technology Assessment approaches and Socio-Technical Integration Research activities such as Midstream Modulation. Still, practical experience of collaborations in industry is limited, while much may be expected from industry in terms of socially responsible innovation development. Experience in and guidelines on how to set up and manage such collaborations are not easily available. Having carried out various collaborative research activities in industry ourselves, we aim to share in this paper our experiences in setting up and working in such collaborations. We highlight the possibilities and boundaries in setting up and managing collaborations, and discuss how we have experienced the emergence of 'collaborative spaces.' Hopefully our findings can facilitate and encourage others to set up collaborative research endeavours.

Proceedings of the August 2011 Traceability Research Summit.

PubMed

Bhatt, Tejas; Buckley, Greg; McEntire, Jennifer C

2013-12-01

IFT's Traceability Improvement Initiative aims to advance work in the area of food product tracing through several means including hosted events where thought leaders exchange knowledge and ideas. In August 2011, the Initiative, in collaboration with GS1 US, convened a group of 50 product tracing stakeholders, as a follow-on to a successful event the month prior. Representatives conducting pilots or implementation studies in produce, seafood, dairy, and other industries discussed the objectives, challenges and learnings. Some of the learnings from on-going initiatives included the sense that better information management provides a return of investment; data often exist but may not necessarily be appropriately linked through the supply chain; and enhanced product tracing enables better accountability and quality control. Challenges identified in enabling traceability throughout the supply chain were the distribution complexity; the need for training, communication, and collaboration; improving the reliability, quality and security of data captured, stored and shared as well as the importance of standards in data and interoperability of technology. Several approaches to overcoming these challenges were discussed. The first approach incrementally improves upon the current "one up/one down" system by requiring electronic records and tracking internal as well as external critical tracking events. The benefits of this approach are its similarity to existing regulatory requirements and low cost of implementation; resulting in a higher probability of adoption. The major disadvantage to this process is the longer response time required during a trace (back or forward). The second approach is similar to a "pedigree" approach where historical information about the food travels with it through the value chain. A major advantage of this approach is the quickest response time during a trace. Some of the disadvantages of this approach are potential for misuse of data, the volume of data required to be maintained at value chain end points, and data privacy concerns. The third approach requires individual nodes within the value chain to maintain electronic records for its own data and make them available for querying during a traceback for outbreak investigation. The major advantage of this approach is the protection of confidential information and the potential for quicker access during a trace. However, the primary disadvantage of this approach is the need for greater computational power and a more complex mechanism to linking the value chain through the data. As next steps, a subgroup will work on clarifying the approach to meeting the goals of traceability, better defining critical tracking events, and articulating the strategy and return on investment from a regulatory and industry perspective. This will result in improved alignment of on-going traceability pilots and initiatives as well as a more actionable guidance document for public review. © 2012 Institute of Food Technologists®

Exploring nurses' perceptions of organizational factors of collaborative relationships.

PubMed

Smith, Kevin; Lavoie-Tremblay, Melanie; Richer, Marie-Claire; Lanctot, Suzanne

2010-01-01

Collaborative relationships are influenced by the context of the organization in which health professionals work. There is limited knowledge concerning the influence that organizational factors have on this process. A descriptive study design using semistructured interviews was used to explore nurses' perceptions of the organizational factors that influence the development of collaborative relationships in health care teams. Eight nurses from a university-affiliated teaching hospital in Montreal participated in this study. Nurses described a variety of experiences where effective collaboration took place. One common theme emerged from the participants: Being Available for Collaboration. Nurses perceived that 2 particular organizational factors-time and workday scheduling-influenced the development of collaborative relationships. This study supports the need for health care managers to promote and invest in alternative means of communication technology and to structure clinical care environments to help promote the development of collaborative relationships within health care teams.

Controlled chain polymerisation and chemical soldering for single-molecule electronics.

PubMed

Okawa, Yuji; Akai-Kasaya, Megumi; Kuwahara, Yuji; Mandal, Swapan K; Aono, Masakazu

2012-05-21

Single functional molecules offer great potential for the development of novel nanoelectronic devices with capabilities beyond today's silicon-based devices. To realise single-molecule electronics, the development of a viable method for connecting functional molecules to each other using single conductive polymer chains is required. The method of initiating chain polymerisation using the tip of a scanning tunnelling microscope (STM) is very useful for fabricating single conductive polymer chains at designated positions and thereby wiring single molecules. In this feature article, developments in the controlled chain polymerisation of diacetylene compounds and the properties of polydiacetylene chains are summarised. Recent studies of "chemical soldering", a technique enabling the covalent connection of single polydiacetylene chains to single functional molecules, are also introduced. This represents a key step in advancing the development of single-molecule electronics.

Evolution of the research collaboration network in a productive department.

PubMed

Katerndahl, David

2012-02-01

Understanding collaboration networks can facilitate the research growth of new or developing departments. The purpose of this study was to use social network analysis to understand how the research collaboration network evolved within a productive department. Over a 13-year period, a departmental faculty completed an annual survey describing their research collaborations. Data were analyzed using social network analysis. Network measures focused on connectedness, distance, groupings and heterogeneity of distribution, while measures for the research director and external collaboration focused on centrality and roles within the network. Longitudinal patterns of network collaboration were assessed using Simulation Investigation for Empirical Network Analysis software (University of Groningen, Groningen, Netherlands). Based upon the number of active research projects, research development can be divided into three phases. The initial development phase was characterized by increasing centralization and collaboration focused within a single subject area. During the maintenance phase, measures went through cycles, possibly because of changes in faculty composition. While the research director was not a 'key player' within the network during the first several years, external collaboration played a central role during all phases. Longitudinal analysis found that forming ties was more likely when the opportunity for network closure existed and when those around you are principal investigators (PIs). Initial development of research relied heavily upon a centralized network involving external collaboration; a central position of the research director during research development was not important. Changes in collaboration depended upon faculty gender and tenure track as well as transitivity and the 'popularity of PIs'. © 2011 Blackwell Publishing Ltd.

Central Savannah River Area P-16 Professional Development School Network: A Reflective Summary of Four Years of Collaboration.

ERIC Educational Resources Information Center

Cooper, Mary Gendernalik

This article traces the development of the Central Savannah River Area P-16 Professional Development School Network Initiative (PDSNI), which began in 1998 as a collaboration between the Department of Teacher Development at Augusta State University, Georgia, and four adjacent school systems. The collaboration's mission was to cultivate a network…

Evaluation of a collaborative project to develop sustainable healthcare education in eight UK medical schools.

PubMed

Walpole, S C; Mortimer, F

2017-09-01

Environmental change poses pressing challenges to public health and calls for profound and far-reaching changes to policy and practice across communities and health systems. Medical schools can act as a seedbed where knowledge, skills and innovation to address environmental challenges can be developed through innovative and collaborative approaches. The objectives of this study were to (1) explore drivers and challenges of collaboration for educational development between and within medical schools; (2) evaluate the effectiveness of a range of pedagogies for sustainable healthcare education; and (3) identify effective strategies to facilitate the renewal of medical curricula to address evolving health challenges. Participatory action research. Medical school teams participated in a nine-month collaborative project, including a one-day seminar to learn about sustainable healthcare education and develop a project plan. After the seminar, teams were supported to develop, deliver and evaluate new teaching at their medical school. New teaching was introduced at seven medical schools. A variety of pedagogies were represented. Collaboration between schools motivated and informed participants. The main challenges faced related to time pressures. Educators and students commented that new teaching was enjoyable and effective at improving knowledge and skills. Collaborative working supported educators to develop and implement new teaching sessions rapidly and effectively. Collaboration can help to build educators' confidence and capacity in a new area of education development. Different forms of collaboration may be appropriate for different circumstances and at different stages of education development. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Evaluating Options for Improving California's Drought Resilience

NASA Astrophysics Data System (ADS)

Ray, P. A.; Schwarz, A.; Wi, S.; Correa, M.; Brown, C.

2015-12-01

Through a unique collaborative arrangement, the University of Massachusetts (UMass) and the California Department of Water Resources (DWR) have together performed a baseline climate change analysis of the California state (State Water Project) and federal (Central Valley Project) water systems. The first step in the baseline analysis was development of an improved basinwide hydrologic model covering a large area of California including all major tributaries to the state and federal water systems. The CalLite modeling system used by DWR for planning purposes allowed simulation of the system of reservoirs, rivers, control points, and deliveries which are then used to create performance metrics that quantify a wide range of system characteristics including water deliveries, water quality, and environmental/ecological factors. A baseline climate stress test was conducted to identify current vulnerabilities to climate change through the linking of the modeling chain with Decision Scaling concepts through the UMass bottom-up climate stress-testing algorithm. This procedure allowed the first comprehensive climate stress analysis of the California state and federal water systems not constrained by observed historical variability and wet-dry year sequences. A forward-looking drought vulnerability and adaptation assessment of the water systems based on this workflow is ongoing and preliminary results will be presented. Presentation of results will include discussion of the collaborative arrangement between DWR and UMass, which is instrumental to both the success of the research and the education of policy makers.

A generic open-source software framework supporting scenario simulations in bioterrorist crises.

PubMed

Falenski, Alexander; Filter, Matthias; Thöns, Christian; Weiser, Armin A; Wigger, Jan-Frederik; Davis, Matthew; Douglas, Judith V; Edlund, Stefan; Hu, Kun; Kaufman, James H; Appel, Bernd; Käsbohrer, Annemarie

2013-09-01

Since the 2001 anthrax attack in the United States, awareness of threats originating from bioterrorism has grown. This led internationally to increased research efforts to improve knowledge of and approaches to protecting human and animal populations against the threat from such attacks. A collaborative effort in this context is the extension of the open-source Spatiotemporal Epidemiological Modeler (STEM) simulation and modeling software for agro- or bioterrorist crisis scenarios. STEM, originally designed to enable community-driven public health disease models and simulations, was extended with new features that enable integration of proprietary data as well as visualization of agent spread along supply and production chains. STEM now provides a fully developed open-source software infrastructure supporting critical modeling tasks such as ad hoc model generation, parameter estimation, simulation of scenario evolution, estimation of effects of mitigation or management measures, and documentation. This open-source software resource can be used free of charge. Additionally, STEM provides critical features like built-in worldwide data on administrative boundaries, transportation networks, or environmental conditions (eg, rainfall, temperature, elevation, vegetation). Users can easily combine their own confidential data with built-in public data to create customized models of desired resolution. STEM also supports collaborative and joint efforts in crisis situations by extended import and export functionalities. In this article we demonstrate specifically those new software features implemented to accomplish STEM application in agro- or bioterrorist crisis scenarios.

magHD: a new approach to multi-dimensional data storage, analysis, display and exploitation

NASA Astrophysics Data System (ADS)

Angleraud, Christophe

2014-06-01

The ever increasing amount of data and processing capabilities - following the well- known Moore's law - is challenging the way scientists and engineers are currently exploiting large datasets. The scientific visualization tools, although quite powerful, are often too generic and provide abstract views of phenomena, thus preventing cross disciplines fertilization. On the other end, Geographic information Systems allow nice and visually appealing maps to be built but they often get very confused as more layers are added. Moreover, the introduction of time as a fourth analysis dimension to allow analysis of time dependent phenomena such as meteorological or climate models, is encouraging real-time data exploration techniques that allow spatial-temporal points of interests to be detected by integration of moving images by the human brain. Magellium is involved in high performance image processing chains for satellite image processing as well as scientific signal analysis and geographic information management since its creation (2003). We believe that recent work on big data, GPU and peer-to-peer collaborative processing can open a new breakthrough in data analysis and display that will serve many new applications in collaborative scientific computing, environment mapping and understanding. The magHD (for Magellium Hyper-Dimension) project aims at developing software solutions that will bring highly interactive tools for complex datasets analysis and exploration commodity hardware, targeting small to medium scale clusters with expansion capabilities to large cloud based clusters.

Reverse Engineering and Software Products Reuse to Teach Collaborative Web Portals: A Case Study with Final-Year Computer Science Students

ERIC Educational Resources Information Center

Medina-Dominguez, Fuensanta; Sanchez-Segura, Maria-Isabel; Mora-Soto, Arturo; Amescua, Antonio

2010-01-01

The development of collaborative Web applications does not follow a software engineering methodology. This is because when university students study Web applications in general, and collaborative Web portals in particular, they are not being trained in the use of software engineering techniques to develop collaborative Web portals. This paper…

Group Collaboration in Organizations: Architectures, Methodologies and Tools

DTIC Science & Technology

2002-03-01

collaboration , its definition and characteristics was completed. Next, existing technologies and standards were studied as well as the ...2000). 22 For effective collaboration , the technology must support the dynamic world of work be it individual, group and/or teamwork, as well as... develop it or simply use it as the basis of discussion. If collaborators are all contributing to the development of a

Engineered antibodies for monitoring of polynuclear aromatic hydrocarbons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karu, A.E.; Roberts, V.A.; Li, Q.X.

1998-06-01

'The long-term goal of this project is to develop antibodies and antibody-based methods for detection and recovery of polynuclear aromatic hydrocarbons (PAHs) and PAH adducts that are potential biomarkers in environmental and biological samples. The inherent cross-reactivity will be exploited by pattern recognition methods. Dr. Karu''s laboratory uses new haptens representing key PAHs to derive recombinant Fab (rFab) and single-chain Fv (scFv) antibodies from hybridoma lines and combinatorial phage display libraries. Computational models of the haptens and combining sites made by Dr. Roberts''s group are used to guide antibody engineering by mutagenesis. Dr. Li''s laboratory develops enzyme immunoassays (EIAs), sensors,more » and immunoaffinity methods that make use of the novel haptens and antibodies for practical analytical applications in support of DOE''s mission. This report summarizes work completed in one and one-half years of a 3-year project, with close collaboration between the three research groups. Dr. Alexander Karu''s laboratory: the authors proceeded with the two strategies described in the original proposal. Site-directed mutagenesis was used to correct differences in the rFab N-terminal amino acids that were introduced by the degenerate PCR primers used for gene amplification. The binding constants of the rFabs with the corrected sequences will be compared with those of the parent MAbs, and should be very similar. The 4D5 and 10C10 heavy and light chain sequences are being moved to the pCOMB3H phagemid vector to facilitate selection of new engineered mutants.'« less

Crater Chains

NASA Technical Reports Server (NTRS)

2003-01-01

[figure removed for brevity, see original site]

The large crater at the top of this THEMIS visible image has several other craters inside of it. Most noticeable are the craters that form a 'chain' on the southern wall of the large crater. These craters are a wonderful example of secondary impacts. They were formed when large blocks of ejecta from an impact crashed back down onto the surface of Mars. Secondaries often form radial patterns around the impact crater that generated them, allowing researchers to trace them back to their origin.

Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

Image information: VIS instrument. Latitude 19.3, Longitude 347.5 East (12.5 West). 19 meter/pixel resolution.

A Study of Collaborative Software Development Using Groupware Tools

ERIC Educational Resources Information Center

Defranco-Tommarello, Joanna; Deek, Fadi P.

2005-01-01

The experimental results of a collaborative problem solving and program development model that takes into consideration the cognitive and social activities that occur during software development is presented in this paper. This collaborative model is based on the Dual Common Model that focuses on individual cognitive aspects of problem solving and…

Professional Development through Teacher Collaboration: An Approach to Enhance Teaching and Learning in Science and Mathematics in Tanzania

ERIC Educational Resources Information Center

Kafyulilo, Ayoub Cherd

2013-01-01

This study introduces "teachers' collaboration" as an approach to teachers' professional development geared at enhancing science and mathematics teaching in Tanzania secondary schools. Teachers' professional development through teachers' collaboration has been reported to be effective for the improvement of schools' performance and…

Features of an Emerging Practice and Professional Development in a Science Teacher Team Collaboration with a Researcher Team

ERIC Educational Resources Information Center

Olin, Anette; Ingerman, Åke

2016-01-01

This study concerns teaching and learning development in science through collaboration between science teachers and researchers. At the core was the ambition to integrate research outcomes of science education--here "didactic models"--with teaching practice, aligned with professional development. The phase where the collaboration moves…

Leading the Ongoing Development of Collaborative Data Practices: Advancing a Schema for Diagnosis and Intervention

ERIC Educational Resources Information Center

Cosner, Shelby

2012-01-01

Research suggests that school leaders play an important role in cultivating and developing collaborative data practices by teachers. Although diagnosis and intervention are critical facets of leaders' work to support collaborative data practice development, this work remains poorly understood. Missing from data-use literature is more explicit and…

Collaboration between Teacher Educators and Schools to Enhance Development

ERIC Educational Resources Information Center

Postholm, May Britt

2016-01-01

The article focuses on school-based development and how collaboration between teacher educators and leaders and teachers can promote development in teacher education, in school and in the collaboration site in school where both parties meet. The data were collected in Norway through qualitative interviews with groups of teachers and leaders at…

Information technology and supply chain management: a study of the food industry.

PubMed

Hill, C A

2000-08-01

This paper's topic is the use of information technology (IT) for the development of supply chain management (SCM). In today's business environment, both in academics and industry, the term SCM has become a popular paradigm. In particular, the use of IT to facilitate the development of supply chain partners is gaining interest within industry. This paper develops the topic of SCM and further develops the relationship between the use of IT, in the form of electronic data interchange, and the development of supply chain integration. The goal of using SCM along with IT is to develop a supply chain that is capable of responding more quickly and efficiently in the meeting of consumer's requirements.

Collaboration in Global Software Engineering Based on Process Description Integration

NASA Astrophysics Data System (ADS)

Klein, Harald; Rausch, Andreas; Fischer, Edward

Globalization is one of the big trends in software development. Development projects need a variety of different resources with appropriate expert knowledge to be successful. More and more of these resources are nowadays obtained from specialized organizations and countries all over the world, varying in development approaches, processes, and culture. As seen with early outsourcing attempts, collaboration may fail due to these differences. Hence, the major challenge in global software engineering is to streamline collaborating organizations towards a successful conjoint development. Based on typical collaboration scenarios, this paper presents a structured approach to integrate processes in a comprehensible way.

A model and typology of collaboration between professionals in healthcare organizations

PubMed Central

D'Amour, Danielle; Goulet, Lise; Labadie, Jean-François; Martín-Rodriguez, Leticia San; Pineault, Raynald

2008-01-01

Background The new forms of organization of healthcare services entail the development of new clinical practices that are grounded in collaboration. Despite recent advances in research on the subject of collaboration, there is still a need for a better understanding of collaborative processes and for conceptual tools to help healthcare professionals develop collaboration amongst themselves in complex systems. This study draws on D'Amour's structuration model of collaboration to analyze healthcare facilities offering perinatal services in four health regions in the province of Quebec. The objectives are to: 1) validate the indicators of the structuration model of collaboration; 2) evaluate interprofessional and interorganizational collaboration in four health regions; and 3) propose a typology of collaboration Methods A multiple-case research strategy was used. The cases were the healthcare facilities that offer perinatal services in four health regions in the province of Quebec (Canada). The data were collected through 33 semi-structured interviews with healthcare managers and professionals working in the four regions. Written material was also analyzed. The data were subjected to a "mixed" inductive-deductive analysis conducted in two main stages: an internal analysis of each case followed by a cross-sectional analysis of all the cases. Results The collaboration indicators were shown to be valid, although some changes were made to three of them. Analysis of the data showed great variation in the level of collaboration between the cases and on each dimension. The results suggest a three-level typology of collaboration based on the ten indicators: active collaboration, developing collaboration and potential collaboration. Conclusion The model and the typology make it possible to analyze collaboration and identify areas for improvement. Researchers can use the indicators to determine the intensity of collaboration and link it to clinical outcomes. Professionals and administrators can use the model to perform a diagnostic of collaboration and implement interventions to intensify it. PMID:18803881

Prescriber-pharmacist collaboration: re-engineering the partnership to optimize pain patient care.

PubMed

Ruble, James H

2013-12-01

The Walgreen Companies recently settled a Drug Enforcement Administration (DEA) administrative action and other investigations arising in connection with a controlled substance distribution facility in Florida and several of its retail pharmacies. These DEA enforcement actions upon a national chain pharmacy have resulted in a series of policies and professional practices that appear to functionally disrupt continuity of patient care. The policy issues transcend the professions and go to the core of our responsibilities to patients. It is unfortunate that regulations intended to prevent diversion also dramatically disrupt interprofessional relations. Based on public statements of professional organizations, unification on this issue seems possible. This presents an opportunity to revisit collaboration among prescribers and pharmacists in legislative and regulatory advocacy. A uniform definition of "legitimate medical purpose" is needed to maximize patient access to needed pharmacotherapy while remaining vigilant for diversion.

Approaches of the German food industry for addressing the issue of food losses.

PubMed

Richter, Beate; Bokelmann, Wolfgang

2016-02-01

In the food industry the subject of food losses is of great importance due to economic balance and an efficient application of resources as well as the development of an efficient food chain system. This paper presents the explorative results of a quantitative survey of leading companies of the German food industry to evaluate the relevance and handling of this issue. The investigation reveals that the topic food losses have a high significance in the food industry which will probably increase in future. A sample breakdown by branches indicates that the issue has the highest relevance for companies in the confectionery industry. These companies as well as those in the meat and fish industry want to consider the subject prospectively more powerful in their companies. Across the food industry, there is no communication to consumers of the efforts concerning food losses. And companies in the confectionery industry and in the fruit and vegetable industry rather want to engage more powerful in this topic if consumers' interest increases. But in order to minimize food losses at all stages along the supply chain, communication and collaboration at all stages is essential, especially the communication to consumers. Thus, it has to be verified whether a suitable communication can lead to advantages in competition and become an important issue for companies to differentiate from competitors. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of collaborative-creative learning model using virtual laboratory media for instrumental analytical chemistry lectures

NASA Astrophysics Data System (ADS)

Zurweni, Wibawa, Basuki; Erwin, Tuti Nurian

2017-08-01

The framework for teaching and learning in the 21st century was prepared with 4Cs criteria. Learning providing opportunity for the development of students' optimal creative skills is by implementing collaborative learning. Learners are challenged to be able to compete, work independently to bring either individual or group excellence and master the learning material. Virtual laboratory is used for the media of Instrumental Analytical Chemistry (Vis, UV-Vis-AAS etc) lectures through simulations computer application and used as a substitution for the laboratory if the equipment and instruments are not available. This research aims to design and develop collaborative-creative learning model using virtual laboratory media for Instrumental Analytical Chemistry lectures, to know the effectiveness of this design model adapting the Dick & Carey's model and Hannafin & Peck's model. The development steps of this model are: needs analyze, design collaborative-creative learning, virtual laboratory media using macromedia flash, formative evaluation and test of learning model effectiveness. While, the development stages of collaborative-creative learning model are: apperception, exploration, collaboration, creation, evaluation, feedback. Development of collaborative-creative learning model using virtual laboratory media can be used to improve the quality learning in the classroom, overcome the limitation of lab instruments for the real instrumental analysis. Formative test results show that the Collaborative-Creative Learning Model developed meets the requirements. The effectiveness test of students' pretest and posttest proves significant at 95% confidence level, t-test higher than t-table. It can be concluded that this learning model is effective to use for Instrumental Analytical Chemistry lectures.

Climate, weather, space weather: model development in an operational context

NASA Astrophysics Data System (ADS)

Folini, Doris

2018-05-01

Aspects of operational modeling for climate, weather, and space weather forecasts are contrasted, with a particular focus on the somewhat conflicting demands of "operational stability" versus "dynamic development" of the involved models. Some common key elements are identified, indicating potential for fruitful exchange across communities. Operational model development is compelling, driven by factors that broadly fall into four categories: model skill, basic physics, advances in computer architecture, and new aspects to be covered, from costumer needs over physics to observational data. Evaluation of model skill as part of the operational chain goes beyond an automated skill score. Permanent interaction between "pure research" and "operational forecast" people is beneficial to both sides. This includes joint model development projects, although ultimate responsibility for the operational code remains with the forecast provider. The pace of model development reflects operational lead times. The points are illustrated with selected examples, many of which reflect the author's background and personal contacts, notably with the Swiss Weather Service and the Max Planck Institute for Meteorology, Hamburg, Germany. In view of current and future challenges, large collaborations covering a range of expertise are a must - within and across climate, weather, and space weather. To profit from and cope with the rapid progress of computer architectures, supercompute centers must form part of the team.

Towards new business models for R&D for novel antibiotics.

PubMed

So, A D; Gupta, N; Brahmachari, S K; Chopra, I; Munos, B; Nathan, C; Outterson, K; Paccaud, J P; Payne, D J; Peeling, R W; Spigelman, M; Weigelt, J

2011-04-01

In the face of a growing global burden of resistance to existing antibiotics, a combination of scientific and economic challenges has posed significant barriers to the development of novel antibacterials over the past few decades. Yet the bottlenecks at each stage of the pharmaceutical value chain-from discovery to post-marketing-present opportunities to reengineer an innovation pipeline that has fallen short. The upstream hurdles to lead identification and optimization may be eased with greater multi-sectoral collaboration, a growing array of alternatives to high-throughput screening, and the application of open source approaches. Product development partnerships and South-South innovation platforms have shown promise in bolstering the R&D efforts to tackle neglected diseases. Strategies that delink product sales from the firms' return on investment can help ensure that the twin goals of innovation and access are met. To effect these changes, both public and private sector stakeholders must show greater commitment to an R&D agenda that will address this problem, not only for industrialized countries but also globally. Copyright © 2011 Elsevier Ltd. All rights reserved.

Recent Progress in Producing Lignin-Based Carbon Fibers for Functional Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul, Ryan; Burwell, Deanna; Dai, Xuliang

Lignin, a biopolymer, has been investigated as a renewable and low-cost carbon fiber precursor since the 1960s. Although successful lab-scale production of lignin-based carbon fibers has been reported, there are currently not any commercial producers. This paper will highlight some of the known challenges with converting lignin-based precursors into carbon fiber, and the reported methods for purifying and modifying lignin to improve it as a precursor. Several of the challenges with lignin are related to its diversity in chemical structure and purity, depending on its biomass source (e.g. hardwood, softwood, grasses) and extraction method (e.g. organosolv, kraft). In order tomore » make progress in this field, GrafTech and Oak Ridge National Laboratory are collaborating to develop lignin-based carbon fiber technology and to demonstrate it in functional applications, as part of a cooperative agreement with the DOE Advanced Manufacturing Office. The progress made to date with producing lignin-based carbon fiber for functional applications, as well as developing and qualifying a supply chain and value proposition, are also highlighted.« less

Collaborative Systems Testing

ERIC Educational Resources Information Center

Pocatilu, Paul; Ciurea, Cristian

2009-01-01

Collaborative systems are widely used today in various activity fields. Their complexity is high and the development involves numerous resources and costs. Testing collaborative systems has a very important role for the systems' success. In this paper we present taxonomy of collaborative systems. The collaborative systems are classified in many…

A Balanced Scorecard for Open Innovation: Measuring the Impact of Industry-University Collaboration

NASA Astrophysics Data System (ADS)

Flores, Myrna; Al-Ashaab, Ahmed; Magyar, Andrea

The Balanced Scorecard (BSC) can be considered as a strategic measurement tool. Since its first publication by Norton and Kaplan in the early 1990’s, many companies have applied it to measure four key aspects of their organisations’ performance: Financial, Customer, Internal Business Process, Learning and Growth. Although it is widely used in the business arena, this original BSC was not developed to assess the impact of collaborative research projects under an open innovation strategy, where the outputs of research and development (R&D) developed by collaborative projects undertaken by industry and universities should be measured in a different way. In fact, many companies are losing important opportunities to spur their R&D results by not being able to quantify the results of such collaborations. Therefore, this paper will propose a Scorecard to measure the outcomes of collaborative research. It is important to recall that this scorecard has been developed during a collaborative research project by CEMEX Research Group AG (Switzerland) and Cranfield University (UK). During such project, a survey was developed to carry out eleven face-to-face interviews in a sample of ten companies in UK, which provided important inputs to design such strategic scorecard. It was confirmed that a collaborative balanced scorecard is a very useful tool to measure, track and improve the impact of conducting collaborative projects with universities.

Teachers' Perceptions of the Effectiveness of Peer-to-Peer Collaboration for Professional Development

ERIC Educational Resources Information Center

Wyman, Kimberly A.

2011-01-01

The purpose of this study was to investigate participating teachers' (PTs) perceptions on the effectiveness of collaborating with a peer for purposes of professional development. As the primary researcher, I wanted to investigate how my colleagues (PTs) perceived peer-to-peer collaboration as a method of professional development. As well, I wanted…

Professionals' views on the development process of a structural collaboration between child and adolescent psychiatry and child welfare: an exploration through the lens of the life cycle model.

PubMed

Van den Steene, Helena; van West, Dirk; Peeraer, Griet; Glazemakers, Inge

2018-03-23

This study, as a part of a participatory action research project, reports the development process of an innovative collaboration between child and adolescent psychiatry and child welfare, for adolescent girls with multiple and complex needs. The findings emerge from a qualitative descriptive analysis of four focus groups with 30 professionals closely involved in this project, and describe the evolution of the collaborative efforts and outcomes through time. Participants describe large investments and negative consequences of rapid organizational change in the beginning of the collaboration project, while benefits of the intensive collaboration only appeared later. A shared person-centred vision and enhanced professionals' confidence were pointed out as important contributors in the evolution of the collaboration. Findings were compared to the literature and showed significant analogy with the life cycle model for shared service centres that describe the maturation of collaborations from a management perspective. These findings enrich the knowledge about the development process of collaboration in health and social care. In increasingly collaborative services, child and adolescent psychiatrists and policy makers should be aware that gains from a collaboration will possibly only be achieved in the longer term, and benefit from knowing which factors have an influence on the evolution of a collaboration project.

Nanotechnology Laboratory Collaborates with Army to Develop Botulism Vaccine | Frederick National Laboratory for Cancer Research

Cancer.gov

The Nanotechnology Characterization Laboratory (NCL) is collaborating with the Army to develop a candidate vaccine against botulism. Under a collaboration agreement between the National Cancer Institute and the U.S. Army Medical Research Institute of

Collaborative Inquiry and the Professional Development of Science Teachers.

ERIC Educational Resources Information Center

Erickson, Gaalen L.

1991-01-01

Argues that the nature and meaning of collaborative relationships depend upon their particular, practical context. Describes an ongoing collaborative research project, the Students' Intuitions and Science Instruction Group (University of British Columbia), detailing its research agenda, postulates pertaining to teacher development, collaborative…

Implementation of a Web-Based Collaborative Process Planning System

NASA Astrophysics Data System (ADS)

Wang, Huifen; Liu, Tingting; Qiao, Li; Huang, Shuangxi

Under the networked manufacturing environment, all phases of product manufacturing involving design, process planning, machining and assembling may be accomplished collaboratively by different enterprises, even different manufacturing stages of the same part may be finished collaboratively by different enterprises. Based on the self-developed networked manufacturing platform eCWS(e-Cooperative Work System), a multi-agent-based system framework for collaborative process planning is proposed. In accordance with requirements of collaborative process planning, share resources provided by cooperative enterprises in the course of collaboration are classified into seven classes. Then a reconfigurable and extendable resource object model is built. Decision-making strategy is also studied in this paper. Finally a collaborative process planning system e-CAPP is developed and applied. It provides strong support for distributed designers to collaboratively plan and optimize product process though network.

Collaborative research to prevent HIV among male prison inmates and their female partners.

PubMed

Grinstead, O A; Zack, B; Faigeles, B

1999-04-01

Despite the need for targeted HIV prevention interventions for prison inmates, institutional and access barriers have impeded development and evaluation of such programs. Over the past 6 years, the authors have developed a unique collaborative relationship to develop and evaluate HIV prevention interventions for prison inmates. The collaboration includes an academic research institution (the Center for AIDS Prevention Studies at the University of California, San Francisco), a community-based organization (Centerforce), and the staff and inmate peer educators inside a state prison. In this ongoing collaboration, the authors have developed and evaluated a series of HIV prevention interventions for prison inmates and for women who visit prison inmates. Results of these studies support the feasibility and effectiveness of HIV prevention programs for inmates and their partners both in prison and in the community. Access and institutional barriers to HIV intervention research in prisons can be overcome through the development of collaborative research partnerships.

Leveraging human oversight and intervention in large-scale parallel processing of open-source data

NASA Astrophysics Data System (ADS)

Casini, Enrico; Suri, Niranjan; Bradshaw, Jeffrey M.

2015-05-01

The popularity of cloud computing along with the increased availability of cheap storage have led to the necessity of elaboration and transformation of large volumes of open-source data, all in parallel. One way to handle such extensive volumes of information properly is to take advantage of distributed computing frameworks like Map-Reduce. Unfortunately, an entirely automated approach that excludes human intervention is often unpredictable and error prone. Highly accurate data processing and decision-making can be achieved by supporting an automatic process through human collaboration, in a variety of environments such as warfare, cyber security and threat monitoring. Although this mutual participation seems easily exploitable, human-machine collaboration in the field of data analysis presents several challenges. First, due to the asynchronous nature of human intervention, it is necessary to verify that once a correction is made, all the necessary reprocessing is done in chain. Second, it is often needed to minimize the amount of reprocessing in order to optimize the usage of resources due to limited availability. In order to improve on these strict requirements, this paper introduces improvements to an innovative approach for human-machine collaboration in the processing of large amounts of open-source data in parallel.

Excessive amounts of mu heavy chain block B-cell development.

PubMed

Zhu, Lingqiao; Chang, Cheong-Hee; Dunnick, Wesley

2011-09-01

Antigen-independent B-cell development occurs in several stages that depend on the expression of Ig heavy and light chain. We identified a line of mice that lacked mature B cells in the spleen. This mouse line carried approximately 11 copies of a transgene of the murine heavy chain constant region locus, and B-lineage cells expressed excessive amounts of the intracellular μ heavy chain. B-cell development failed in the bone marrow at the pro/pre B-cell transition, and examination of other lines with various copy numbers of the same transgene suggested that deficiencies in B-cell development increased with increased transgene copy number. Expression of a transgenic (Tg) light chain along with the Tg μ heavy chain led to minimal rescue of B-cell development in the bone marrow and B cells in the spleen. There are several potential mechanisms for the death of pro/pre B cells as a consequence of excess heavy chain expression.

Collaboration space division in collaborative product development based on a genetic algorithm

NASA Astrophysics Data System (ADS)

Qian, Xueming; Ma, Yanqiao; Feng, Huan

2018-02-01

The advance in the global environment, rapidly changing markets, and information technology has created a new stage for design. In such an environment, one strategy for success is the Collaborative Product Development (CPD). Organizing people effectively is the goal of Collaborative Product Development, and it solves the problem with certain foreseeability. The development group activities are influenced not only by the methods and decisions available, but also by correlation among personnel. Grouping the personnel according to their correlation intensity is defined as collaboration space division (CSD). Upon establishment of a correlation matrix (CM) of personnel and an analysis of the collaboration space, the genetic algorithm (GA) and minimum description length (MDL) principle may be used as tools in optimizing collaboration space. The MDL principle is used in setting up an object function, and the GA is used as a methodology. The algorithm encodes spatial information as a chromosome in binary. After repetitious crossover, mutation, selection and multiplication, a robust chromosome is found, which can be decoded into an optimal collaboration space. This new method can calculate the members in sub-spaces and individual groupings within the staff. Furthermore, the intersection of sub-spaces and public persons belonging to all sub-spaces can be determined simultaneously.

Collaboration Strategies to Reduce Technical Debt

ERIC Educational Resources Information Center

Miko, Jeffrey Allen

2017-01-01

Inadequate software development collaboration processes can allow technical debt to accumulate increasing future maintenance costs and the chance of system failures. The purpose of this qualitative case study was to explore collaboration strategies software development leaders use to reduce the amount of technical debt created by software…

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

Monoclonal IgM-related AL amyloidosis.

PubMed

Milani, Paolo; Merlini, Giampaolo

2016-06-01

Monoclonal immunoglobulin M (IgM)-related light chain (AL) amyloidosis, which accounts for 5%-7% of all AL amyloidosis cases, is a distinct clinical entity that poses specific challenges to clinicians. Several studies reported that although there is a substantial overlap, the pattern of organ involvement is peculiar, with higher frequencies of lung, lymph nodes, and peripheral nervous system involvement. A recent collaborative study from three European referral centers, defined that cardiac involvement, advanced Mayo disease stage, neuropathic, and liver involvement were independent factors that had impact on survival in IgM-AL amyloidosis patients. Once the diagnosis of amyloidosis is made, correct amyloid typing is necessary to design appropriate therapy and follow-up. Treatment is focused on the suppression of the clone, and fast reduction of the circulating free light chains. New drugs targeting the amyloid deposits will be used in combination with anti-clone therapies. Copyright © 2016. Published by Elsevier Ltd.

International ring trial for the validation of an event-specific Golden Rice 2 quantitative real-time polymerase chain reaction method.

PubMed

Jacchia, Sara; Nardini, Elena; Bassani, Niccolò; Savini, Christian; Shim, Jung-Hyun; Trijatmiko, Kurniawan; Kreysa, Joachim; Mazzara, Marco

2015-05-27

This article describes the international validation of the quantitative real-time polymerase chain reaction (PCR) detection method for Golden Rice 2. The method consists of a taxon-specific assay amplifying a fragment of rice Phospholipase D α2 gene, and an event-specific assay designed on the 3' junction between transgenic insert and plant DNA. We validated the two assays independently, with absolute quantification, and in combination, with relative quantification, on DNA samples prepared in haploid genome equivalents. We assessed trueness, precision, efficiency, and linearity of the two assays, and the results demonstrate that both the assays independently assessed and the entire method fulfill European and international requirements for methods for genetically modified organism (GMO) testing, within the dynamic range tested. The homogeneity of the results of the collaborative trial between Europe and Asia is a good indicator of the robustness of the method.

Collaborative learning in pre-clinical dental hygiene education.

PubMed

Mueller-Joseph, Laura J; Nappo-Dattoma, Luisa

2013-04-01

Dental hygiene education continues to move beyond mastery of content material and skill development to learning concepts that promote critical-thinking and problem-solving skills. The purpose of this research was to evaluate the effectiveness of collaborative learning and determine the growth in intellectual development of 54 first-year dental hygiene students. The control group used traditional pre-clinical teaching and the experimental group used collaborative pedagogy for instrument introduction. All students were subjected to a post-test evaluating their ability to apply the principles of instrumentation. Intellectual development was determined using pre- and post-tests based on the Perry Scheme of Intellectual Development. Student attitudes were assessed using daily Classroom Assessment Activities and an end-of-semester departmental course evaluation. Findings indicated no significant difference between collaborative learning and traditional learning in achieving pre-clinical competence as evidenced by the students' ability to apply the principles of instrumentation. Advancement in intellectual development did not differ significantly between groups. Value added benefits of a collaborative learning environment as identified by the evaluation of student attitudes included decreased student reliance on authority, recognition of peers as legitimate sources of learning and increased self-confidence. A significant difference in student responses to daily classroom assessments was evident on the 5 days a collaborative learning environment was employed. Dental hygiene students involved in a pre-clinical collaborative learning environment are more responsible for their own learning and tend to have a more positive attitude toward the subject matter. Future studies evaluating collaborative learning in clinical dental hygiene education need to investigate the cost/benefit ratio of the value added outcomes of collaborative learning.

EUV mask manufacturing readiness in the merchant mask industry

NASA Astrophysics Data System (ADS)

Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

2017-10-01

As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for the broadest community possible as the technology is implemented first within and then beyond the initial early adopters.

An Open Source Business Model for Malaria

PubMed Central

Årdal, Christine; Røttingen, John-Arne

2015-01-01

Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, ‘closed’ publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more “open source” approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV) to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.’ President’s Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related to new malaria medicines and consider alternative incentives, like WHO prequalification. PMID:25658590

Supporting Effective Collaboration: Using a Rearview Mirror to Look Forward

ERIC Educational Resources Information Center

McManus, Margaret M.; Aiken, Robert M.

2016-01-01

Our original research, to design and develop an Intelligent Collaborative Learning System (ICLS), yielded the creation of a Group Leader Tutor software system which utilizes a Collaborative Skills Network to monitor students working collaboratively in a networked environment. The Collaborative Skills Network was a conceptualization of…

Food-borne diseases - the challenges of 20 years ago still persist while new ones continue to emerge.

PubMed

Newell, Diane G; Koopmans, Marion; Verhoef, Linda; Duizer, Erwin; Aidara-Kane, Awa; Sprong, Hein; Opsteegh, Marieke; Langelaar, Merel; Threfall, John; Scheutz, Flemming; van der Giessen, Joke; Kruse, Hilde

2010-05-30

The burden of diseases caused by food-borne pathogens remains largely unknown. Importantly data indicating trends in food-borne infectious intestinal disease is limited to a few industrialised countries, and even fewer pathogens. It has been predicted that the importance of diarrhoeal disease, mainly due to contaminated food and water, as a cause of death will decline worldwide. Evidence for such a downward trend is limited. This prediction presumes that improvements in the production and retail of microbiologically safe food will be sustained in the developed world and, moreover, will be rolled out to those countries of the developing world increasingly producing food for a global market. In this review evidence is presented to indicate that the microbiological safety of food remains a dynamic situation heavily influenced by multiple factors along the food chain from farm to fork. Sustaining food safety standards will depend on constant vigilance maintained by monitoring and surveillance but, with the rising importance of other food-related issues, such as food security, obesity and climate change, competition for resources in the future to enable this may be fierce. In addition the pathogen populations relevant to food safety are not static. Food is an excellent vehicle by which many pathogens (bacteria, viruses/prions and parasites) can reach an appropriate colonisation site in a new host. Although food production practices change, the well-recognised food-borne pathogens, such as Salmonella spp. and Escherichia coli, seem able to evolve to exploit novel opportunities, for example fresh produce, and even generate new public health challenges, for example antimicrobial resistance. In addition, previously unknown food-borne pathogens, many of which are zoonotic, are constantly emerging. Current understanding of the trends in food-borne diseases for bacterial, viral and parasitic pathogens has been reviewed. The bacterial pathogens are exemplified by those well-recognized by policy makers; i.e. Salmonella, Campylobacter, E. coli and Listeria monocytogenes. Antimicrobial resistance in several bacterial food-borne pathogens (Salmonella, Campylobacter, Shigella and Vibrio spp., methicillin resistant Staphylcoccus aureas, E. coli and Enterococci) has been discussed as a separate topic because of its relative importance to policy issues. Awareness and surveillance of viral food-borne pathogens is generally poor but emphasis is placed on Norovirus, Hepatitis A, rotaviruses and newly emerging viruses such as SARS. Many food-borne parasitic pathogens are known (for example Ascaris, Cryptosporidia and Trichinella) but few of these are effectively monitored in foods, livestock and wildlife and their epidemiology through the food-chain is poorly understood. The lessons learned and future challenges in each topic are debated. It is clear that one overall challenge is the generation and maintenance of constructive dialogue and collaboration between public health, veterinary and food safety experts, bringing together multidisciplinary skills and multi-pathogen expertise. Such collaboration is essential to monitor changing trends in the well-recognised diseases and detect emerging pathogens. It will also be necessary understand the multiple interactions these pathogens have with their environments during transmission along the food chain in order to develop effective prevention and control strategies. Crown Copyright 2010. Published by Elsevier B.V. All rights reserved.

The SCEC Community Modeling Environment (SCEC/CME) - An Overview of its Architecture and Current Capabilities

NASA Astrophysics Data System (ADS)

Maechling, P. J.; Jordan, T. H.; Minster, B.; Moore, R.; Kesselman, C.; SCEC ITR Collaboration

2004-12-01

The Southern California Earthquake Center (SCEC), in collaboration with the San Diego Supercomputer Center, the USC Information Sciences Institute, the Incorporated Research Institutions for Seismology, and the U.S. Geological Survey, is developing the Southern California Earthquake Center Community Modeling Environment (CME) under a five-year grant from the National Science Foundation's Information Technology Research (ITR) Program jointly funded by the Geosciences and Computer and Information Science & Engineering Directorates. The CME system is an integrated geophysical simulation modeling framework that automates the process of selecting, configuring, and executing models of earthquake systems. During the Project's first three years, we have performed fundamental geophysical and information technology research and have also developed substantial system capabilities, software tools, and data collections that can help scientist perform systems-level earthquake science. The CME system provides collaborative tools to facilitate distributed research and development. These collaborative tools are primarily communication tools, providing researchers with access to information in ways that are convenient and useful. The CME system provides collaborators with access to significant computing and storage resources. The computing resources of the Project include in-house servers, Project allocations on USC High Performance Computing Linux Cluster, as well as allocations on NPACI Supercomputers and the TeraGrid. The CME system provides access to SCEC community geophysical models such as the Community Velocity Model, Community Fault Model, Community Crustal Motion Model, and the Community Block Model. The organizations that develop these models often provide access to them so it is not necessary to use the CME system to access these models. However, in some cases, the CME system supplements the SCEC community models with utility codes that make it easier to use or access these models. In some cases, the CME system also provides alternatives to the SCEC community models. The CME system hosts a collection of community geophysical software codes. These codes include seismic hazard analysis (SHA) programs developed by the SCEC/USGS OpenSHA group. Also, the CME system hosts anelastic wave propagation codes including Kim Olsen's Finite Difference code and Carnegie Mellon's Hercules Finite Element tool chain. The CME system can execute a workflow, that is, a series of geophysical computations using the output of one processing step as the input to a subsequent step. Our workflow capability utilizes grid-based computing software that can submit calculations to a pool of computing resources as well as data management tools that help us maintain an association between data files and metadata descriptions of those files. The CME system maintains, and provides access to, a collection of valuable geophysical data sets. The current CME Digital Library holdings include a collection of 60 ground motion simulation results calculated by a SCEC/PEER working group and a collection of Greens Functions calculated for 33 TriNet broadband receiver sites in the Los Angeles area.

The Web Resource Collaboration Center

ERIC Educational Resources Information Center

Dunlap, Joanna C.

2004-01-01

The Web Resource Collaboration Center (WRCC) is a web-based tool developed to help software engineers build their own web-based learning and performance support systems. Designed using various online communication and collaboration technologies, the WRCC enables people to: (1) build a learning and professional development resource that provides…

Collaborative Group Action Research: A Constructivist Approach to Developing an Integrated Curriculum.

ERIC Educational Resources Information Center

Saurino, Penny L.; Saurino, Dan R.

Elementary teachers collaborated on a research project that investigated how a constructivist approach to gifted and talented integrated curriculum strategies and techniques could be developed and implemented. The collaborative group action research cycle involved planning, collecting baseline data, intervening strategies/modifying interventions,…

Developing Collaborative Learning Practices in an Online Language Course

ERIC Educational Resources Information Center

Chang, Heejin; Windeatt, Scott

2016-01-01

There is much evidence to support the occurrence of learning in connection with collaboration, both in face-to-face and online teaching situations, but much less research on how such collaboration develops over the duration of a course. Using Dillenbourg's concepts of "situation," "interactions," "mechanisms," and…

International tuberculosis research collaborations within Asia.

PubMed

Molton, James S; Singh, Shweta; Chen, Ling Jun; Paton, Nicholas I

2017-09-07

Asia bears more than half the global tuberculosis (TB) burden. Economic development in the region has increased available funding for biomedical research and opportunity for collaboration. We explored the extent of international tuberculosis research collaborations between institutions within Asia. We conducted a Pubmed search for all articles with tuberculosis in the title published during a 12 month period with at least one author affiliation listed in Asia, then identified international collaborations from institution websites and internet searches. We identified 99 international collaborations involving an institution within Asia, of which only 8 (8.1%) were collaborations between Asian institutions. The remainder were with institutions outside of Asia. The paucity of intra-Asian international research collaboration represents a lost opportunity to optimise regional research funding, capacity building and the development of an Asia-relevant TB research agenda.

A Collaboration on Collaboration

NASA Technical Reports Server (NTRS)

Cobleigh, Brent

2004-01-01

NASA's 2003-2004 Leadership Development Program class recognized that effective collaborations are often the key to achieving mission success. Personal connections and common goals were key elements of their work together and key findings of their collaboration benchmarking within the agency.

Interprofessional collaboration regarding patients' care plans in primary care: a focus group study into influential factors.

PubMed

van Dongen, Jerôme Jean Jacques; Lenzen, Stephanie Anna; van Bokhoven, Marloes Amantia; Daniëls, Ramon; van der Weijden, Trudy; Beurskens, Anna

2016-05-28

The number of people with multiple chronic conditions demanding primary care services is increasing. To deal with the complex health care demands of these people, professionals from different disciplines collaborate. This study aims to explore influential factors regarding interprofessional collaboration related to care plan development in primary care. A qualitative study, including four semi-structured focus group interviews (n = 4). In total, a heterogeneous group of experts (n = 16) and health care professionals (n = 15) participated. Participants discussed viewpoints, barriers, and facilitators regarding interprofessional collaboration related to care plan development. The data were analysed by means of inductive content analysis. The findings show a variety of factors influencing the interprofessional collaboration in developing a care plan. Factors can be divided into 5 key categories: (1) patient-related factors: active role, self-management, goals and wishes, membership of the team; (2) professional-related factors: individual competences, domain thinking, motivation; (3) interpersonal factors: language differences, knowing each other, trust and respect, and motivation; (4) organisational factors: structure, composition, time, shared vision, leadership and administrative support; and (5) external factors: education, culture, hierarchy, domain thinking, law and regulations, finance, technology and ICT. Improving interprofessional collaboration regarding care plan development calls for an integral approach including patient- and professional related factors, interpersonal, organisational, and external factors. Further, the leader of the team seems to play a key role in watching the patient perspective, organising and coordinating interprofessional collaborations, and guiding the team through developments. The results of this study can be used as input for developing tools and interventions targeted at executing and improving interprofessional collaboration related to care plan development.

Comparing art-science collaboration efforts to highlight changes in the marine environment of Arctic Alaska

NASA Astrophysics Data System (ADS)

Lee, O. A.

2016-12-01

Significant changes to the Arctic marine environment is anticipated as a result of decreasing sea ice and increasing anthropogenic activity that may occur with increasing access to ice-free waters. Two different collaboration efforts between scientists and artists on projects related to changes in the Alaskan Arctic waters are compared to present different outcomes from two collaboration strategies. The first collaboration involved a funded project to develop visualizations of change on the North Slope as part of an outreach effort for the North Slope Science Initiative Scenarios project. The second collaboration was a voluntary art-science collaboration to develop artwork about changing sea ice habitat for walrus as one contribution to a featured art show during the 2016 Arctic Science Summit Week. Both collaboration opportunities resulted in compelling visualizations. However the funded collaboration provided for more iterative discussions between the scientist and the collaborators for the film and animation products throughout the duration of the project. This ensured that the science remained an important focal point. In contrast, the product of the voluntary collaboration effort was primarily driven by the artist's perspective, although the discussions with the scientist played a role in connecting the content of the three panels in the final art and sculpture piece. This comparison of different levels of scientist-involvement and resources used to develop the visualizations highlights the importance of defining the intended audience and expectations for all collaborators early.

Collaborative Online Teaching: A Model for Gerontological Social Work Education

ERIC Educational Resources Information Center

Fulton, Amy E.; Walsh, Christine A.; Azulai, Anna; Gulbrandsen, Cari; Tong, Hongmei

2015-01-01

Social work students and faculty are increasingly embracing online education and collaborative teaching. Yet models to support these activities have not been adequately developed. This paper describes how a team of instructors developed, delivered, and evaluated an undergraduate gerontological social work course using a collaborative online…

A Model for International Collaborative Development Work in Schools

ERIC Educational Resources Information Center

Amiel, Tel; McClendon, V. J.; Orey, Michael

2007-01-01

This paper discusses the establishment of an international collaborative program focused on school improvement in Brazil and the United States. Two qualitative research studies were conducted on the development work conducted by faculty, students, and local K-12 school stakeholders. The design and implementation of collaborative student projects…

Collaborative Doctoral Programmes: Employer Engagement, Knowledge Mediation and Skills for Innovation

ERIC Educational Resources Information Center

Kitagawa, Fumi

2014-01-01

This paper investigates forms of collaborative doctoral programmes that enable employer engagement in innovation and skills development. Collaborative doctoral programmes exist in different national contexts for the development of the science and technology human capital. Such programmes are also seen as policy tools that enhance relationships…

Development and Determination of Reliability and Validity of Professional Learning Community Collaborative Team Survey (CTS)

ERIC Educational Resources Information Center

Colvin, Joshua A.

2013-01-01

The study of transformative learning within collaborative teams was conducted to gain new applicable knowledge used to influence overall school improvement and implementation of professional learning communities. To obtain this new knowledge, the Professional Learning Community Collaborative Team Survey (CTS) was developed and psychometrically…

The "1+1:Life & Love" Simultaneous Exhibition: Cross-Border Collaboration in the Western Balkans

ERIC Educational Resources Information Center

Walters, Diana

2012-01-01

This article describes and analyzes a cross-border, "simultaneous exhibition" collaborative project in six post-conflict western Balkan countries. Through a process of collaboration, active learning, and audience development, professional and personal trust developed among eleven museums. Previously identified barriers were overcome and…

The Collaborative Peer Supervision Group Project: A Continuing Education Model to Promote Professional Competence

ERIC Educational Resources Information Center

Thomasgard, Michael; Warfield, Janeece

2005-01-01

Thomasgard, a physician, and Warfield, a psychologist, describe the multidisciplinary Collaborative Peer Supervision Group Project, originally developed and implemented in Columbus, Ohio. Collaborative Peer Supervision Groups (CPSGs) foster the development of case-based, interdisciplinary, continuing education. CPSGs are designed to improve the…

The Impact of Collaboration, Empowerment, and Choice: An Empirical Examination of the Collaborative Course Development Method

ERIC Educational Resources Information Center

Aiken, K. Damon; Heinze, Timothy C.; Meuter, Matthew L.; Chapman, Kenneth J.

2017-01-01

This research empirically tests collaborative course development (CCD)-a pedagogy presented in the 2016 "Marketing Education Review Special Issue on Teaching Innovations". A team of researchers taught experimental courses using CCD methods (employing various techniques including syllabus building, "flex-tures," free-choice…

Collaborative Partnerships: A Model for Science Teacher Education and Professional Development

ERIC Educational Resources Information Center

Jones, Mellita M.

2008-01-01

This paper proposes a collaborative partnership between practicing and pre-service teachers as a model for implementing science teacher education and professional development. This model provides a structure within which partnerships will work collaboratively to plan, implement and reflect on a series of Science lessons in cycles of…

The Prospects for Collaboration between Schools and Universities To Improve American Education.

ERIC Educational Resources Information Center

Hawley, Willis D.

Collaboration between schools and institutions of higher education (IHE) is usually effective only when values are shared and mutual dependencies are recognized. These conditions are uncommon. The foundation upon which such collaboration could be developed requires several building blocks: (1) developing shared goals regarding teacher learning;…

Collaborative PLM - The Next Generation AKA Cars on Mars

NASA Technical Reports Server (NTRS)

Soderstrom, Tom; Stefanini, Mike

2007-01-01

In this slide presentation the importance of collaboration in developing the next systems for space exploration is stressed. The mechanism of this collaboration are reviewed, and particular emphasis is given to our planned exploration of Mars and how this will require a great deal of collaboration. A system architecture for this collaboration is shown and the diagram for the collaborative environment is conceptualized.

Developing Argumentation Skills in Mathematics through Computer-Supported Collaborative Learning: The Role of Transactivity

ERIC Educational Resources Information Center

Vogel, Freydis; Kollar, Ingo; Ufer, Stefan; Reichersdorfer, Elisabeth; Reiss, Kristina; Fischer, Frank

2016-01-01

Collaboration scripts and heuristic worked examples are effective means to scaffold university freshmen's mathematical argumentation skills. Yet, which collaborative learning processes are responsible for these effects has remained unclear. Learners presumably will gain the most out of collaboration if the collaborators refer to each other's…

A Data Mining Approach to Reveal Representative Collaboration Indicators in Open Collaboration Frameworks

ERIC Educational Resources Information Center

Anaya, Antonio R.; Boticario, Jesus G.

2009-01-01

Data mining methods are successful in educational environments to discover new knowledge or learner skills or features. Unfortunately, they have not been used in depth with collaboration. We have developed a scalable data mining method, whose objective is to infer information on the collaboration during the collaboration process in a…

Measuring Urban Carbon Footprint from Carbon Flows in the Global Supply Chain.

PubMed

Hu, Yuanchao; Lin, Jianyi; Cui, Shenghui; Khanna, Nina Zheng

2016-06-21

A global multiregional input-output (MRIO) model was built for eight Chinese cities to track their carbon flows. For in-depth understanding of urban carbon footprint from the perspectives of production, consumption, and trade balance, four kinds of footprints and four redefined measurement indicators were calculated. From the global supply chain, urban carbon inflows from Mainland China were larger than outflows, while the carbon outflows to European, principal North American countries and East Asia were much larger than inflows. With the rapid urbanization of China, Construction was the largest consumer and Utilities was the largest producer. Cities with higher consumption (such as Dalian, Tianjin, Shanghai, and Beijing) should change their consumption patterns, while cities with lower production efficiency (such as Dalian, Shanghai, Ningbo, and Chongqing) should improve their technology. The cities of net carbon consumption tended to transfer carbon emissions out of them by trading in carbon-intensive products, while the cities of net carbon production tended to produce carbon-intensive products for nonlocal consumers. Our results indicated that urban carbon abatement requires not only rational consumption and industrial symbiosis at the city level, but also tighter collaboration along all stages of the global supply chain.

Developing International Collaborations for Early Career Researchers in Psychology

PubMed Central

Flanagan, Julianne C.; Barrett, Emma L.; Crome, Erica; Forbes, Miriam

2015-01-01

International collaboration is becoming increasingly vital as the emphasis on unmet need for mental health across cultures and nations grows. Opportunities exist for early career researchers to engage in international collaboration. However, little information is provided about such opportunities in most current psychology training models. The authors are early career researchers in psychology from U.S. and Australia who have developed a collaborative relationship over the past two years. Our goal is to increase awareness of funding opportunities to support international research and to highlight the benefits and challenges associated with international collaboration based on our experience. PMID:27453624

Developing effective child psychiatry collaboration with primary care: leadership and management strategies.

PubMed

Sarvet, Barry D; Wegner, Lynn

2010-01-01

By working in collaboration with pediatric primary care providers, child and adolescent psychiatrists have the opportunity to address significant levels of unmet need for the majority of children and teenagers with serious mental health problems who have been unable to gain access to care. Effective collaboration with primary care represents a significant change from practice-as-usual for many child and adolescent psychiatrists. Implementation of progressive levels of collaborative practice, from the improvement of provider communication through the development of comprehensive collaborative systems, may be possible with sustained management efforts and application of process improvement methodology.

Effect of Peer-to-Peer Nurse-Physician Collaboration on Attitudes Toward the Nurse-Physician Relationship.

PubMed

Edwards, Pamela B; Rea, Jean B; Oermann, Marilyn H; Hegarty, Ellen J; Prewitt, Judy R; Rudd, Mariah; Silva, Susan; Nagler, Alisa; Turner, David A; DeMeo, Stephen D

The goal of this study was to pilot a novel peer-to-peer nurse-physician collaboration program and assess for changes in attitudes toward collaboration among a group of newly licensed nurses and resident physicians (n = 39). The program included large group meetings, with discussion of key concepts related to interprofessional collaboration. In unit-based teams, the registered nurses and physicians developed a quality improvement project to meet a need on their unit. Creating learning activities like this program enable nursing professional development specialists to promote interprofessional collaboration and learning.

Promoting collaboration skills on reflection concept through multimedia-based integrated instruction

NASA Astrophysics Data System (ADS)

Hermawan, Hermawan; Siahaan, Parsaoran; Suhendi, Endi; Samsudin, Achmad

2017-05-01

Multimedia-Based Integrated Instructions (MBI2) has been developed to promote the collaboration skills on reflection concepts turn into more real and meaningful learning. The initial design of MBI2 in the form of a multimedia computer that allows users to explore the concept of the overall reflectance of the light through the conceptual and practical aspects that have been developed. MBI2has been developed to promoteone of the skills that the 21st-century skills to students'junior high school that is collaboration skill in order to compete in the future life. The ability to collaborate is divided into five aspects, namely contributions, time management, problem-solving, working with others and research techniques. Research methods utiliseed in this study is an exploration and instructional development 4D model (define, design, develop and disseminate). Based on data analysis, it can be concluded that the development of integrated multimedia-based instruction (MBI2) on the concept of reflection through the 4D developing model was effectively to enhance collaboration skills of students'junior high school.

Innovation in global collaborations: from student placement to mutually beneficial exchanges.

PubMed

Suarez-Balcazar, Yolanda; Hammel, Joy; Mayo, Liliana; Inwald, Stephanie; Sen, Supriya

2013-06-01

Five years ago, an academic department in the United States and the Ann Sullivan Center of Peru (CASP) initiated an international partnership to foster research collaborations and reciprocal consultation, and to create an advanced clinical placement for occupational therapy doctoral students. CASP is a globally recognized hub for community-based research, demonstration and training for people with disabilities (most of whom are from low-income families). CASP has provided occupational therapy students and faculty with a rich cultural environment in which to learn and collaborate as well as opportunities for developing research collaborations. The purpose of this manuscript is to discuss an innovative model of international collaboration highlighting specific areas of exchange and reciprocal learning. First, we will describe the collaboration and CASP's rich learning opportunities. Second, we will discuss a model of collaboration that includes three main phases: planning and preparation, developing and sustaining the partnership, and evaluating and celebrating outcomes and benefits. We illustrate the partnership with a case example and describe exchanges between CASP and a local community agency with whom faculty have collaborated for 20 years. Finally, we discuss implications of our innovative model towards developing and sustaining global partnerships. . Copyright © 2013 John Wiley & Sons, Ltd.

Computer Supported Cooperative Work in Information Search and Retrieval.

ERIC Educational Resources Information Center

Twidale, Michael B.; Nichols, David M.

1998-01-01

Considers how research in collaborative technologies can inform research and development in library and information science. Topics include computer supported collaborative work; shared drawing; collaborative writing; MUDs; MOOs; workflow; World Wide Web; collaborative learning; computer mediated communication; ethnography; evaluation; remote…

Collaborative testing as a learning strategy in nursing education: a review of the literature.

PubMed

Sandahl, Sheryl S

2009-01-01

Nurses are important members of a patient's interprofessional health care team. A primary goal of nursing education is to prepare nursing professionals who can work collaboratively with other team members for the benefit of the patient. Collaborative learning strategies provide students with opportunities to learn and practice collaboration. Collaborative testing is a collaborative learning strategy used to foster knowledge development, critical thinking in decision-making, and group processing skills. This article reviews the theoretical basis for collaborative learning and research on collaborative testing in nursing education.

a Radical Collaborative Approach: Developing a Model for Learning Theory, Human-Based Computation and Participant Motivation in a Rock-Art Heritage Application

NASA Astrophysics Data System (ADS)

Haubt, R.

2016-06-01

This paper explores a Radical Collaborative Approach in the global and centralized Rock-Art Database project to find new ways to look at rock-art by making information more accessible and more visible through public contributions. It looks at rock-art through the Key Performance Indicator (KPI), identified with the latest Australian State of the Environment Reports to help develop a better understanding of rock-art within a broader Cultural and Indigenous Heritage context. Using a practice-led approach the project develops a conceptual collaborative model that is deployed within the RADB Management System. Exploring learning theory, human-based computation and participant motivation the paper develops a procedure for deploying collaborative functions within the interface design of the RADB Management System. The paper presents the results of the collaborative model implementation and discusses considerations for the next iteration of the RADB Universe within an Agile Development Approach.

Problem Solving and Collaboration Using Mobile Serious Games

ERIC Educational Resources Information Center

Sanchez, Jaime; Olivares, Ruby

2011-01-01

This paper presents the results obtained with the implementation of a series of learning activities based on Mobile Serious Games (MSGs) for the development of problem solving and collaborative skills in Chilean 8th grade students. Three MSGs were developed and played by teams of four students in order to solve problems collaboratively. A…

Leadership in an International Collaborative Writing Groups (ICWG) Initiative: Implications for Academic Development

ERIC Educational Resources Information Center

Marquis, Elizabeth; Mårtensson, Katarina; Healey, Mick

2017-01-01

This article presents the results of research examining an innovative initiative designed to build capacity for international, collaborative scholarship of teaching and learning: the development of international collaborative writing groups (ICWG). The study focusses particularly on the role of leadership within the groups as a significant factor…

Using Creativity and Collaboration to Develop Innovative Programs That Embrace Diversity in Higher Education

ERIC Educational Resources Information Center

Robinson, A. Helene

2012-01-01

This paper provides an example of an innovative solution to program development that addresses the diverse needs of teacher educators throughout various geographical locations in Florida, through a collaborative multi-university, multi-agency teacher training program funded by one collaborative grant. In this time of economic uncertainties,…

Characterizing Cross-Professional Collaboration in Research and Development Projects in Secondary Education

ERIC Educational Resources Information Center

Schenke, Wouter; van Driel, Jan H.; Geijsel, Femke P.; Sligte, Henk W.; Volman, Monique L. L.

2016-01-01

Collaboration between practitioners and researchers can increasingly be observed in research and development (R&D) projects in secondary schools. This article presents an analysis of cross-professional collaboration between teachers, school leaders and educational researchers and/or advisers as part of R&D projects in terms of three…

78 FR 50424 - NIH Cooperative Research and Development Agreement Program: Invitation To Solicit Nonclinical and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

...) Program. This CRADA Program is an extension of collaboration opportunities solicited by NIH or developed... health mission of the NIH. These collaboration opportunities are structured under the authority of 15 U.S... use of such additional information. The collaboration will be governed by CRADA terms that address...

How Can Teachers' Entrepreneurial Competences Be Developed? A Collaborative Learning Perspective

ERIC Educational Resources Information Center

Peltonen, Katariina

2015-01-01

Purpose: The purpose of this paper is to explore the role of collaborative learning in the development of teachers' entrepreneurial competences in the school context at primary, secondary and vocational levels of education. Design/methodology/approach: The research is based on an interpretative and collaborative learning approach to teachers'…

An Urban Public School and University Collaboration: What Makes a PDS?

ERIC Educational Resources Information Center

Sosin, Adrienne; Parham, Ann

This paper describes the status and development of a school/university partnership from the point of view of the participants. Descriptions of the paths collaboration has taken, anecdotal recall, and reflections about working toward a collaborative relationship support comparisons of this relationship with the Professional Development School (PDS)…

Authoring Tools for Collaborative Intelligent Tutoring System Environments

ERIC Educational Resources Information Center

Olsen, Jennifer K.; Belenky, Daniel M.; Aleven, Vincent; Rummel, Nikol; Sewall, Jonathan; Ringenberg, Michael

2014-01-01

Authoring tools have been shown to decrease the amount of time and resources needed for the development of Intelligent Tutoring Systems (ITSs). Although collaborative learning has been shown to be beneficial to learning, most of the current authoring tools do not support the development of collaborative ITSs. In this paper, we discuss an extension…

Planning Teacher Professional Development: The Struggles and Successes of an Inter-Organizational Collaboration

ERIC Educational Resources Information Center

Frost, Janet Hart; Akmal, Tariq T.; Kingrey, Joan U.

2010-01-01

Inter-organizational collaboration is often seen as a means of increasing the potential for bringing about outcomes that none of the organizations could achieve alone. For example, funding agencies that provide grants for teacher professional development often encourage or require collaboration between institutions of higher education and schools.…

The Role of Context in a Collaborative Problem-Solving Task during Professional Development

ERIC Educational Resources Information Center

Ritella, Giuseppe; Ligorio, Maria Beatrice; Hakkarainen, Kai

2016-01-01

This article analyses how a group of teachers managed the resources available while performing computer-supported collaborative problem-solving tasks in the context of professional development. The authors video-recorded and analysed collaborative sessions during which the group of teachers used a digital environment to prepare a pedagogical…

Collaborative Annotation System Environment (CASE) for Online Learning

ERIC Educational Resources Information Center

Glover, Ian; Hardaker, Glenn; Xu, Zhijie

2004-01-01

This paper outlines the design and development process of an online annotation system and how it is applied to the sphere of collaborative online learning. The architecture and design of the annotation system, illustrated in this paper, have been developed to enrich collaborative learning content through adding a layer of information in online…

Developing Effective Academic Accommodations in Higher Education: A Collaborative Decision-Making Process

ERIC Educational Resources Information Center

Hsiao, Feilin; Zeiser, Shelly; Nuss, Daniel; Hatschek, Keith

2018-01-01

This case study describes a collaborative decision-making process for developing effective academic accommodations for a music major with a disability, whose prior accommodations suggested by the Disability Support Services (DSS) failed to address her needs. Cross-departmental collaboration between the DSS and the School of Music, as well as…

The Impact of Collaborative Scaffolding in Educational Video Games on the Collaborative Support Skills of Middle School Students

ERIC Educational Resources Information Center

Loparev, Anna

2016-01-01

Collaboration is crucial to everything from product development in the workplace to research design in academia, yet there is no consensus on best practice when it comes to teaching collaborative skills. We explore one promising option: collaborative scaffolding in educational video games. Through this methodology, we can impart collaborative…

Challenges and Opportunities of US and Arab Collaborations in Health Services Research: A Case Study from Qatar

PubMed Central

Hammoud, Maya M.; Elnashar, Maha; Abdelrahim, Huda; Khidir, Amal; Elliott, Heather A.K.; Killawi, Amal; Padela, Aasim I.; Khal, Abdul Latif Al; Bener, Abdulbari; Fetters, Michael D.

2012-01-01

Economic globalization and advances in technology have made it more feasible and even necessary to develop international research collaborations in global public health. Historically, collaborations in global research described in the literature have been mostly “North-South” collaborations in which the more developed “North” country works together with a developing “South” country to conduct research in the latter. This type of collaboration has for the most part, represented unequal partnership and rarely left behind a lasting impact. Recently, the opportunity for a new kind of international research partnership has emerged in which the host country has significant financial resources, but relatively limited expertise in research methodology or techniques and research implementation. This type of collaboration features a relative equalization of power between the international partners. The purpose of this paper is to describe the process of building a successful research collaboration between a team in the United States and a team in Qatar, a rich Arabic nation in Gulf. We present a case study that provides an overview of our own project focused on the development of a culturally and linguistically adapted health care quality instrument for Qatar, discussing many of the benefits and challenges we encountered during each phase of instrument development. We present recommendations for researchers seeking sustainable and equitable partnerships with the Arab World. PMID:23121751

Challenges and opportunities of US and Arab collaborations in health services research: a case study from Qatar.

PubMed

Hammoud, Maya M; Elnashar, Maha; Abdelrahim, Huda; Khidir, Amal; Elliott, Heather A K; Killawi, Amal; Padela, Aasim I; Al Khal, Abdul Latif; Bener, Abdulbari; Fetters, Michael D

2012-09-25

Economic globalization and advances in technology have made it more feasible and even necessary to develop international research collaborations in global public health. Historically, collaborations in global research described in the literature have been mostly "North-South" collaborations in which the more developed "North" country works together with a developing "South" country to conduct research in the latter. This type of collaboration has for the most part, represented unequal partnership and rarely left behind a lasting impact. Recently, the opportunity for a new kind of international research partnership has emerged in which the host country has significant financial resources, but relatively limited expertise in research Methodology or techniques and research implementation.  This type of collaboration features a relative equalization of power between the international partners. The purpose of this paper is to describe the process of building a successful research collaboration between a team in the United States and a team in Qatar, a rich Arabic nation in Gulf. We present a case study that provides an overview of our own project focused on the development of a culturally and linguistically adapted health care quality instrument for Qatar, discussing many of the benefits and challenges we encountered during each phase of instrument development. We present recommendations for researchers seeking sustainable and equitable partnerships with the Arab World.

Productivity trends and collaboration patterns: A diachronic study in the eating disorders field

PubMed Central

Valderrama-Zurián, Juan-Carlos; Aguilar-Moya, Remedios; Cepeda-Benito, Antonio; Navarro-Moreno, María-Ángeles; Gandía-Balaguer, Asunción; Aleixandre-Benavent, Rafael

2017-01-01

Objective The present study seeks to extend previous bibliometric studies on eating disorders (EDs) by including a time-dependent analysis of the growth and evolution of multi-author collaborations and their correlation with ED publication trends from 1980 to 2014 (35 years). Methods Using standardized practices, we searched Web of Science (WoS) Core Collection (WoSCC) (indexes: Science Citation Index-Expanded [SCIE], & Social Science Citation Index [SSCI]) and Scopus (areas: Health Sciences, Life Sciences, & Social Sciences and Humanities) to identify a large sample of articles related to EDs. We then submitted our sample of articles to bibliometric and graph theory analyses to identify co-authorship and social network patterns. Results We present a large number of detailed findings, including a clear pattern of scientific growth measured as number of publications per five-year period or quinquennium (Q), a tremendous increase in the number of authors attracted by the ED subject, and a very high and steady growth in collaborative work. Conclusions We inferred that the noted publication growth was likely driven by the noted increase in the number of new authors per Q. Social network analyses suggested that collaborations within ED follow patters of interaction that are similar to well established and recognized disciplines, as indicated by the presence of a “giant cluster”, high cluster density, and the replication of the “small world” phenomenon—the principle that we are all linked by short chains of acquaintances. PMID:28850569

Developing a policy game intervention to enhance collaboration in public health policymaking in three European countries.

PubMed

Spitters, H P E M; van Oers, J A M; Sandu, P; Lau, C J; Quanjel, M; Dulf, D; Chereches, R; van de Goor, L A M

2017-12-19

One of the key elements to enhance the uptake of evidence in public health policies is stimulating cross-sector collaboration. An intervention stimulating collaboration is a policy game. The aim of this study was to describe the design and methods of the development process of the policy game ‘In2Action’ within a real-life setting of public health policymaking networks in the Netherlands, Denmark and Romania. The development of the policy game intervention consisted of three phases, pre intervention, designing the game intervention and tailoring the intervention. In2Action was developed as a role-play game of one day, with main focus to develop in collaboration a cross-sector implementation plan based on the approved strategic local public health policy. This study introduced an innovative intervention for public health policymaking. It described the design and development of the generic frame of the In2Action game focusing on enhancing collaboration in local public health policymaking networks. By keeping the game generic, it became suitable for each of the three country cases with only minor changes. The generic frame of the game is expected to be generalizable for other European countries to stimulate interaction and collaboration in the policy process.

Linking earth science informatics resources into uninterrupted digital value chains

NASA Astrophysics Data System (ADS)

Woodcock, Robert; Angreani, Rini; Cox, Simon; Fraser, Ryan; Golodoniuc, Pavel; Klump, Jens; Rankine, Terry; Robertson, Jess; Vote, Josh

2015-04-01

The CSIRO Mineral Resources Flagship was established to tackle medium- to long-term challenges facing the Australian mineral industry across the value chain from exploration and mining through mineral processing within the framework of an economically, environmentally and socially sustainable minerals industry. This broad portfolio demands collaboration and data exchange with a broad range of participants and data providers across government, research and industry. It is an ideal environment to link geoscience informatics platforms to application across the resource extraction industry and to unlock the value of data integration between traditionally discrete parts of the minerals digital value chain. Despite the potential benefits, data integration remains an elusive goal within research and industry. Many projects use only a subset of available data types in an integrated manner, often maintaining the traditional discipline-based data 'silos'. Integrating data across the entire minerals digital value chain is an expensive proposition involving multiple disciplines and, significantly, multiple data sources both internal and external to any single organisation. Differing vocabularies and data formats, along with access regimes to appropriate analysis software and equipment all hamper the sharing and exchange of information. AuScope has addressed the challenge of data exchange across organisations nationally, and established a national geosciences information infrastructure using open standards-based web services. Federated across a wide variety of organisations, the resulting infrastructure contains a wide variety of live and updated data types. The community data standards and infrastructure platforms that underpin AuScope provide important new datasets and multi-agency links independent of software and hardware differences. AuScope has thus created an infrastructure, a platform of technologies and the opportunity for new ways of working with and integrating disparate data at much lower cost. An early example of this approach is the value generated by combining geological and metallurgical data sets as part of the rapidly growing field of geometallurgy. This not only provides a far better understanding of the impact of geological variability on ore processing but also leads to new thinking on the types and characteristics of data sets collected at various stages of the exploration and mining process. The Minerals Resources Flagship is linking its research activities to the AuScope infrastructure, exploiting the technology internally to create a platform for integrated research across the minerals value chain and improved interaction with industry. Referred to as the 'Early Access Virtual Lab', the system will be fully interoperable with AuScope and international infrastructures using open standards like GeosciML. Secured access is provided to allow confidential collaboration with industry when required. This presentation will discuss how the CSIRO Mineral Resources Flagship is building on the AuScope infrastructure to transform the way that data and data products are identified, shared, integrated, and reused, to unlock the benefits of true integration of research efforts across the minerals digital value chain.

CERN Computing in Commercial Clouds

NASA Astrophysics Data System (ADS)

Cordeiro, C.; Field, L.; Garrido Bear, B.; Giordano, D.; Jones, B.; Keeble, O.; Manzi, A.; Martelli, E.; McCance, G.; Moreno-García, D.; Traylen, S.

2017-10-01

By the end of 2016 more than 10 Million core-hours of computing resources have been delivered by several commercial cloud providers to the four LHC experiments to run their production workloads, from simulation to full chain processing. In this paper we describe the experience gained at CERN in procuring and exploiting commercial cloud resources for the computing needs of the LHC experiments. The mechanisms used for provisioning, monitoring, accounting, alarming and benchmarking will be discussed, as well as the involvement of the LHC collaborations in terms of managing the workflows of the experiments within a multicloud environment.

Collaboration between employers and occupational health service providers: a systematic review of key characteristics.

PubMed

Halonen, Jaana I; Atkins, Salla; Hakulinen, Hanna; Pesonen, Sanna; Uitti, Jukka

2017-01-05

Employees are major contributors to economic development, and occupational health services (OHS) can have an important role in supporting their health. Key to this is collaboration between employers and OHS. We reviewed the evidence regarding the characteristics of good collaboration between employers and OHS providers that is essential to construct more effective collaboration and services. A systematic review of the factors of good collaboration between employers and OHS providers was conducted. We searched five databases between January 2000 and March 2016 and back referenced included articles. Two reviewers evaluated 639 titles, 63 abstracts and 20 full articles, and agreed that six articles, all on qualitative studies, met the predetermined relevance and publication criteria and were included. Data were extracted by one reviewer and checked by a second reviewer and analysed using thematic analysis. Three themes and nine subthemes related to good collaboration were identified. The first theme included time, space and contract requirements for effective collaboration with three subthemes (i.e., key characteristics): flexible OHS/flexible contracts including tailor-made services accounting for the needs of the employer, geographical proximity of the stakeholders allowing easy access to services, and long-term contracts as collaboration develops over time. The second theme was related to characteristics of the dialogue in effective collaboration that consisted of shared goals, reciprocity, frequent contact and trust. According to the third theme the definition of roles of the stakeholders was important; OHS providers should have competence and knowledge about the workplace, become strategic partners with the employers as well as provide quality services. Although literature regarding collaboration between the employers and OHS providers was limited, we identified several key factors that contribute to effective collaboration. This information is useful in developing indicators of effective collaboration that will enable organisation of more effective OHS practices.

Global scientific collaboration in COPD research.

PubMed

Su, Yanbing; Long, Chao; Yu, Qi; Zhang, Juan; Wu, Daisy; Duan, Zhiguang

2017-01-01

This study aimed to investigate the multiple collaboration types, quantitatively evaluate the publication trends and review the performance of institutions or countries (regions) across the world in COPD research. Scientometric methods and social network analysis were used to survey the development of publication trends and understand current collaboration in the field of COPD research based on the Web of Science publications during the past 18 years. The number of publications developed through different collaboration types has increased. Growth trends indicate that the percentage of papers authored through multinational and domestic multi-institutional collaboration (DMIC) have also increased. However, the percentage of intra-institutional collaboration and single-authored (SA) studies has reduced. The papers that produced the highest academic impact result from international collaboration. The second highest academic impact papers are produced by DMIC. Out of the three, the papers that are produced by SA studies have the least amount of impact upon the scientific community. A handful of internationally renowned institutions not only take the leading role in the development of the research within their country (region) but also play a crucial role in international research collaboration in COPD. Both the amount of papers produced and the amount of cooperation that occurs in each study are disproportionally distributed between high-income countries (regions) and low-income countries (regions). Growing attention has been generated toward research on COPD from more and more different academic domains. Despite the rapid development in COPD research, collaboration in the field of COPD research still has room to grow, especially between different institutions or countries (regions), which would promote the progress of global COPD research.

Hospital readiness for health information exchange: development of metrics associated with successful collaboration for quality improvement.

PubMed

Korst, Lisa M; Aydin, Carolyn E; Signer, Jordana M K; Fink, Arlene

2011-08-01

The development of readiness metrics for organizational participation in health information exchange is critical for monitoring progress toward, and achievement of, successful inter-organizational collaboration. In preparation for the development of a tool to measure readiness for data-sharing, we tested whether organizational capacities known to be related to readiness were associated with successful participation in an American data-sharing collaborative for quality improvement. Cross-sectional design, using an on-line survey of hospitals in a large, mature data-sharing collaborative organized for benchmarking and improvement in nursing care quality. Factor analysis was used to identify salient constructs, and identified factors were analyzed with respect to "successful" participation. "Success" was defined as the incorporation of comparative performance data into the hospital dashboard. The most important factor in predicting success included survey items measuring the strength of organizational leadership in fostering a culture of quality improvement (QI Leadership): (1) presence of a supportive hospital executive; (2) the extent to which a hospital values data; (3) the presence of leaders' vision for how the collaborative advances the hospital's strategic goals; (4) hospital use of the collaborative data to track quality outcomes; and (5) staff recognition of a strong mandate for collaborative participation (α=0.84, correlation with Success 0.68 [P<0.0001]). The data emphasize the importance of hospital QI Leadership in collaboratives that aim to share data for QI or safety purposes. Such metrics should prove useful in the planning and development of this complex form of inter-organizational collaboration. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Hospital readiness for health information exchange: development of metrics associated with successful collaboration for quality improvement

PubMed Central

Korst, Lisa M.; Aydin, Carolyn E.; Signer, Jordana M. K.; Fink, Arlene

2011-01-01

Objective The development of readiness metrics for organizational participation in health information exchange is critical for monitoring progress toward, and achievement of, successful inter-organizational collaboration. In preparation for the development of a tool to measure readiness for data-sharing, we tested whether organizational capacities known to be related to readiness were associated with successful participation in an American data-sharing collaborative for quality improvement. Design Cross-sectional design, using an on-line survey of hospitals in a large, mature data-sharing collaborative organized for benchmarking and improvement in nursing care quality. Measurements Factor analysis was used to identify salient constructs, and identified factors were analyzed with respect to “successful” participation. “Success” was defined as the incorporation of comparative performance data into the hospital dashboard. Results The most important factor in predicting success included survey items measuring the strength of organizational leadership in fostering a culture of quality improvement (QI Leadership): 1) presence of a supportive hospital executive; 2) the extent to which a hospital values data; 3) the presence of leaders’ vision for how the collaborative advances the hospital’s strategic goals; 4) hospital use of the collaborative data to track quality outcomes; and 5) staff recognition of a strong mandate for collaborative participation (α = 0.84, correlation with Success 0.68 [P < 0.0001]). Conclusion The data emphasize the importance of hospital QI Leadership in collaboratives that aim to share data for QI or safety purposes. Such metrics should prove useful in the planning and development of this complex form of inter-organizational collaboration. PMID:21330191

Effectiveness of a systematic approach to promote intersectoral collaboration in comprehensive school health promotion-a multiple-case study using quantitative and qualitative data.

PubMed

Pucher, Katharina K; Candel, Math J J M; Krumeich, Anja; Boot, Nicole M W M; De Vries, Nanne K

2015-07-05

We report on the longitudinal quantitative and qualitative data resulting from a two-year trajectory (2008-2011) based on the DIagnosis of Sustainable Collaboration (DISC) model. This trajectory aimed to support regional coordinators of comprehensive school health promotion (CSHP) in systematically developing change management and project management to establish intersectoral collaboration. Multilevel analyses of quantitative data on the determinants of collaborations according to the DISC model were done, with 90 respondents (response 57 %) at pretest and 69 respondents (52 %) at posttest. Nvivo analyses of the qualitative data collected during the trajectory included minutes of monthly/bimonthly personal/telephone interviews (N = 65) with regional coordinators, and documents they produced about their activities. Quantitative data showed major improvements in change management and project management. There were also improvements in consensus development, commitment formation, formalization of the CSHP, and alignment of policies, although organizational problems within the collaboration increased. Content analyses of qualitative data identified five main management styles, including (1) facilitating active involvement of relevant parties; (2) informing collaborating parties; (3) controlling and (4) supporting their task accomplishment; and (5) coordinating the collaborative processes. We have contributed to the fundamental understanding of the development of intersectoral collaboration by combining qualitative and quantitative data. Our results support a systematic approach to intersectoral collaboration using the DISC model. They also suggest five main management styles to improve intersectoral collaboration in the initial stage. The outcomes are useful for health professionals involved in similar ventures.

Combating poor-quality anti-malarial medicines: a call to action.

PubMed

Bassat, Quique; Tanner, Marcel; Guerin, Philippe J; Stricker, Kirstin; Hamed, Kamal

2016-06-01

The circulation of poor-quality medicines continues to undermine the fight against many life-threatening diseases. Anti-malarial medicines appear to have been particularly compromised and present a major public health threat in malaria-endemic countries, negatively affecting individuals and their communities. Concerted collaborative efforts are required from global, regional and national organizations, involving the public and private sectors, to address the problem. While many initiatives are underway, a number of unmet needs deserve urgent and increased multisector attention. At the global level, there is a need for an international public health legal framework or treaty on poor-quality medicines, with statutes suitable for integration into national laws. In addition, increased international efforts are required to strengthen the governance of global supply chains and enhance cooperation between national medicine regulation authorities and law enforcement bodies. Increased investment is needed in innovative technologies that will enable healthcare teams to detect poor-quality medicines at all levels of the supply chain. At the regional level, a number of initiatives would be beneficial-key areas are standardization, simplification, and reciprocal recognition of registration processes and development of quality control capacity in regional centres of excellence that are better aligned with public health needs; improved surveillance methods and creation of a framework for compulsory and transparent reporting of poor-quality medicines; additional support for national medicine regulation authorities and other national partner authorities; and an increase in support for regional laboratories to boost their capabilities in detecting poor-quality medicines. It is vital that all stakeholders involved in efforts against poor-quality anti-malarial medicines extend and strengthen their actions in these critical areas and thus effectively support global health development and malaria elimination programmes.

Modeling Anisotropic Self-Assembly of Isotropic Objects: from Hairy Nanoparticles to Methylcellulose Fibrils

NASA Astrophysics Data System (ADS)

Ginzburg, Valeriy

Spontaneous symmetry breaking and formation of anisotropic structures from apparently isotropic building blocks is an exciting and not fully understood topic. I will discuss two examples of such self-assembly. The first example is related to the assembly of ``hairy'' nanoparticles in homopolymer matrices. The particles can assemble into long strings (they can also form other morphologies, as well) even though the shape of each particle and the distribution of ligands on the particle surface is spherically symmetric. Using the approach developed by Thompson, Ginzburg, Matsen, and Balazs, we show that presence of other particles can re-distribute the ligands and effectively ``polarize'' the particle-particle interaction, giving rise to the formation of 1d particle strings. In the second example, we consider aqueous solutions of methylcellulose (MC) polymers. It has been shown recently that at high temperature, the polymers form high-aspect ratio ``fibrils'' with diameter ~15 nm and length in the hundreds on nanometers. Using coarse-grained Molecular Dynamics (CG-MD), we propose that the ``fibrils'' are result of one-dimensional self-assembly of single molecule ``rings''. Each MC polymer chain is forced into a ring because of the balance between internal chain rigidity (favoring more expanded configuration) and unfavorable polymer-water interactions (favoring more collapsed conformation). We also develop a theory predicting rheology and phase behavior of aqueous MC, and validate it against experimental data. Both examples show that anisotropic self-assembly can show up in unexpected places, and various theoretical tools are needed to successfully model it. Funded by The Dow Chemical Company through Grant 223278AF. Collaborators: R. L. Sammler (Dow), W. Huang and R. Larson (U. of Michigan).

More Than Bar Codes: Integrating Global Standards-Based Bar Code Technology Into National Health Information Systems in Ethiopia and Pakistan to Increase End-to-End Supply Chain Visibility.

PubMed

Hara, Liuichi; Guirguis, Ramy; Hummel, Keith; Villanueva, Monica

2017-12-28

The United Nations Population Fund (UNFPA) and the United States Agency for International Development (USAID) DELIVER PROJECT work together to strengthen public health commodity supply chains by standardizing bar coding under a single set of global standards. From 2015, UNFPA and USAID collaborated to pilot test how tracking and tracing of bar coded health products could be operationalized in the public health supply chains of Ethiopia and Pakistan and inform the ecosystem needed to begin full implementation. Pakistan had been using proprietary bar codes for inventory management of contraceptive supplies but transitioned to global standards-based bar codes during the pilot. The transition allowed Pakistan to leverage the original bar codes that were preprinted by global manufacturers as opposed to printing new bar codes at the central warehouse. However, barriers at lower service delivery levels prevented full realization of end-to-end data visibility. Key barriers at the district level were the lack of a digital inventory management system and absence of bar codes at the primary-level packaging level, such as single blister packs. The team in Ethiopia developed an open-sourced smartphone application that allowed the team to scan bar codes using the mobile phone's camera and to push the captured data to the country's data mart. Real-time tracking and tracing occurred from the central warehouse to the Addis Ababa distribution hub and to 2 health centers. These pilots demonstrated that standardized product identification and bar codes can significantly improve accuracy over manual stock counts while significantly streamlining the stock-taking process, resulting in efficiencies. The pilots also showed that bar coding technology by itself is not sufficient to ensure data visibility. Rather, by using global standards for identification and data capture of pharmaceuticals and medical devices, and integrating the data captured into national and global tracking systems, countries are able to lay the foundation for interoperability and ensure a harmonized language between global health stakeholders. © Hara et al.

More Than Bar Codes: Integrating Global Standards-Based Bar Code Technology Into National Health Information Systems in Ethiopia and Pakistan to Increase End-to-End Supply Chain Visibility

PubMed Central

Hara, Liuichi; Guirguis, Ramy; Hummel, Keith; Villanueva, Monica

2017-01-01

The United Nations Population Fund (UNFPA) and the United States Agency for International Development (USAID) DELIVER PROJECT work together to strengthen public health commodity supply chains by standardizing bar coding under a single set of global standards. From 2015, UNFPA and USAID collaborated to pilot test how tracking and tracing of bar coded health products could be operationalized in the public health supply chains of Ethiopia and Pakistan and inform the ecosystem needed to begin full implementation. Pakistan had been using proprietary bar codes for inventory management of contraceptive supplies but transitioned to global standards-based bar codes during the pilot. The transition allowed Pakistan to leverage the original bar codes that were preprinted by global manufacturers as opposed to printing new bar codes at the central warehouse. However, barriers at lower service delivery levels prevented full realization of end-to-end data visibility. Key barriers at the district level were the lack of a digital inventory management system and absence of bar codes at the primary-level packaging level, such as single blister packs. The team in Ethiopia developed an open-sourced smartphone application that allowed the team to scan bar codes using the mobile phone's camera and to push the captured data to the country's data mart. Real-time tracking and tracing occurred from the central warehouse to the Addis Ababa distribution hub and to 2 health centers. These pilots demonstrated that standardized product identification and bar codes can significantly improve accuracy over manual stock counts while significantly streamlining the stock-taking process, resulting in efficiencies. The pilots also showed that bar coding technology by itself is not sufficient to ensure data visibility. Rather, by using global standards for identification and data capture of pharmaceuticals and medical devices, and integrating the data captured into national and global tracking systems, countries are able to lay the foundation for interoperability and ensure a harmonized language between global health stakeholders. PMID:29284701

Engaging Communities in Education and Research: PBRNs, AHEC, and CTSA

PubMed Central

Westfall, John M.; Ingram, Beth; Navarro, Daniel; Magee, Deidre; Niebauer, Linda; Zittleman, Linda; Fernald, Douglas; Pace, Wilson

2012-01-01

Abstract Background: Community engagement has become a prominent element in medical research and is an important component of the Clinical and Translational Science Awards program. Area Health Education Centers engage communities in education and workforce development. Methods: Engaging Communities in Education and Research (ECER) is a successful collaboration among the Colorado Area Health Education Center (AHEC), the Colorado Clinical Translational Science Institute, and Shared Network of Collaborative Ambulatory Practices and Partners—Colorado’s practice‐based research collaborative. The ECER Conference is an annual conference of community members, health care providers, clinical preceptors, AHEC board members, university faculty, primary care investigators, program administrators, and community organization leaders. Results: Over 1,000 people have participated in the ECER Conference representing all regions of Colorado. Several projects from the “new ideas” breakout session have been developed and completed. Six‐month follow‐up provided evidence of numerous new collaborations, campus‐community partnerships, and developing research projects. Several new collaborations highlight the long‐term nature of building on relationships started at the ECER Conference. Discussion and Conclusion: ECER has been a successful collaboration to develop and support campus‐community collaborations in Colorado. Although seemingly just a simple 3‐day conference, we have found that this event has lead to many important partnerships. Clin Trans Sci 2012; Volume #: 1–9 PMID:22686202

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns

PubMed Central

Du, Bisheng; Liu, Qing; Li, Guiping

2017-01-01

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development. PMID:29117150

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns.

PubMed

Du, Bisheng; Liu, Qing; Li, Guiping

2017-11-08

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development.

Collaborative Learning through Formative Peer Review with Technology

ERIC Educational Resources Information Center

Eaton, Carrie Diaz; Wade, Stephanie

2014-01-01

This paper describes a collaboration between a mathematician and a compositionist who developed a sequence of collaborative writing assignments for calculus. This sequence of developmentally appropriate assignments presents peer review as a collaborative process that promotes reflection, deepens understanding, and improves exposition. First, we…

Tools for Collaboration: Using and Designing Tools in Interorganizational Economic-Crime Investigation

ERIC Educational Resources Information Center

Puonti, Anne

2004-01-01

Economic-crime investigation in Finland is in transition from hierarchically organized, sequential collaboration between authorities toward parallel, interorganizational collaboration. This article describes the tools used and developed for managing the new collaborative economic-crime-investigation process. The challenge is to find…

Toward a Script Theory of Guidance in Computer-Supported Collaborative Learning

PubMed Central

Fischer, Frank; Kollar, Ingo; Stegmann, Karsten; Wecker, Christof

2013-01-01

This article presents an outline of a script theory of guidance for computer-supported collaborative learning (CSCL). With its 4 types of components of internal and external scripts (play, scene, role, and scriptlet) and 7 principles, this theory addresses the question of how CSCL practices are shaped by dynamically reconfigured internal collaboration scripts of the participating learners. Furthermore, it explains how internal collaboration scripts develop through participation in CSCL practices. It emphasizes the importance of active application of subject matter knowledge in CSCL practices, and it prioritizes transactive over nontransactive forms of knowledge application in order to facilitate learning. Further, the theory explains how external collaboration scripts modify CSCL practices and how they influence the development of internal collaboration scripts. The principles specify an optimal scaffolding level for external collaboration scripts and allow for the formulation of hypotheses about the fading of external collaboration scripts. Finally, the article points toward conceptual challenges and future research questions. PMID:23378679

Chain of care development in Sweden: results of a national study

PubMed Central

Åhgren, Bengt

2003-01-01

Abstract Chains of Care are today an important counterbalance to the ever-increasing fragmentation of Swedish health care, and the ongoing development work has high priority. Improved quality of care is the most important reason for developing Chains of Care. Despite support in the form of goals and activity plans, seven out of ten county councils are uncertain whether they have been quite successful in the development work. Strong departmentalisation of responsibilities between different medical professions and departments, types of responsibilities and power still remaining in the vertical organisation structure, together with limited participation from the local authorities, are some of the most commonly mentioned reasons for the lack of success. Even though there is hesitation regarding the development work up to today, all county councils will continue developing Chains of Care. The main reason is, as was the case with Chain of Care development up to today, to improve quality of care. Although one of the main purposes is to make health care more patient-focused, patients in general seem to have limited impact on the development work. Therefore, the challenge is to design Chains of Care, which regards patients as partners instead of objects. PMID:16896423

Developing an evaluation framework for consumer-centred collaborative care of depression using input from stakeholders.

PubMed

McCusker, Jane; Yaffe, Mark; Sussman, Tamara; Kates, Nick; Mulvale, Gillian; Jayabarathan, Ajantha; Law, Susan; Haggerty, Jeannie

2013-03-01

To develop a framework for research and evaluation of collaborative mental health care for depression, which includes attributes or domains of care that are important to consumers. A literature review on collaborative mental health care for depression was completed and used to guide discussion at an interactive workshop with pan-Canadian participants comprising people treated for depression with collaborative mental health care, as well as their family members; primary care and mental health practitioners; decision makers; and researchers. Thematic analysis of qualitative data from the workshop identified key attributes of collaborative care that are important to consumers and family members, as well as factors that may contribute to improved consumer experiences. The workshop identified an overarching theme of partnership between consumers and practitioners involved in collaborative care. Eight attributes of collaborative care were considered to be essential or very important to consumers and family members: respectfulness; involvement of consumers in treatment decisions; accessibility; provision of information; coordination; whole-person care; responsiveness to changing needs; and comprehensiveness. Three inter-related groups of factors may affect the consumer experience of collaborative care, namely, organizational aspects of care; consumer characteristics and personal resources; and community resources. A preliminary evaluation framework was developed and is presented here to guide further evaluation and research on consumer-centred collaborative mental health care for depression.

A Collaborative Learning Network Approach to Improvement: The CUSP Learning Network.

PubMed

Weaver, Sallie J; Lofthus, Jennifer; Sawyer, Melinda; Greer, Lee; Opett, Kristin; Reynolds, Catherine; Wyskiel, Rhonda; Peditto, Stephanie; Pronovost, Peter J

2015-04-01

Collaborative improvement networks draw on the science of collaborative organizational learning and communities of practice to facilitate peer-to-peer learning, coaching, and local adaption. Although significant improvements in patient safety and quality have been achieved through collaborative methods, insight regarding how collaborative networks are used by members is needed. Improvement Strategy: The Comprehensive Unit-based Safety Program (CUSP) Learning Network is a multi-institutional collaborative network that is designed to facilitate peer-to-peer learning and coaching specifically related to CUSP. Member organizations implement all or part of the CUSP methodology to improve organizational safety culture, patient safety, and care quality. Qualitative case studies developed by participating members examine the impact of network participation across three levels of analysis (unit, hospital, health system). In addition, results of a satisfaction survey designed to evaluate member experiences were collected to inform network development. Common themes across case studies suggest that members found value in collaborative learning and sharing strategies across organizational boundaries related to a specific improvement strategy. The CUSP Learning Network is an example of network-based collaborative learning in action. Although this learning network focuses on a particular improvement methodology-CUSP-there is clear potential for member-driven learning networks to grow around other methods or topic areas. Such collaborative learning networks may offer a way to develop an infrastructure for longer-term support of improvement efforts and to more quickly diffuse creative sustainment strategies.

Collaborative Work or Individual Chores: The Role of Family Social Organization in Children's Learning to Collaborate and Develop Initiative.

PubMed

Mejía-Arauz, Rebeca; Correa-Chávez, Maricela; Keyser Ohrt, Ulrike; Aceves-Azuara, Itzel

2015-01-01

In many communities, children learn about family and community endeavors as they collaborate and become involved in community activities. This chapter analyzes how parents promote collaboration and learning to collaborate at home in an Indigenous and in a non-Indigenous Mexican community. We examine variation among parents with different extent of experience with schooling and concepts regarding child development and relate these to patterns of child collaboration at home among Mexican Indigenous and urban families. Drawing on interviews with 34 mothers in the P'urhépecha community of Cherán, Michoacán, and 18 interviews in the cosmopolitan city of Guadalajara, Mexico, we argue that the social nature of participation may be a key feature of learning to collaborate and pitch in in families and communities where school has not been a central institution of childhood over generations. © 2015 Elsevier Inc. All rights reserved.

Evaluation on Collaborative Satisfaction for Project Management Team in Integrated Project Delivery Mode

NASA Astrophysics Data System (ADS)

Zhang, L.; Li, Y.; Wu, Q.

2013-05-01

Integrated Project Delivery (IPD) is a newly-developed project delivery approach for construction projects, and the level of collaboration of project management team is crucial to the success of its implementation. Existing research has shown that collaborative satisfaction is one of the key indicators of team collaboration. By reviewing the literature on team collaborative satisfaction and taking into consideration the characteristics of IPD projects, this paper summarizes the factors that influence collaborative satisfaction of IPD project management team. Based on these factors, this research develops a fuzzy linguistic method to effectively evaluate the level of team collaborative satisfaction, in which the authors adopted the 2-tuple linguistic variables and 2-tuple linguistic hybrid average operators to enhance the objectivity and accuracy of the evaluation. The paper demonstrates the practicality and effectiveness of the method through carrying out a case study with the method.

Building international collaborative capacity: contributions of community psychologists to a European network.

PubMed

García-Ramírez, Manuel; Paloma, Virginia; Suarez-Balcazar, Yolanda; Balcazar, Fabricio

2009-09-01

Europe is in the process of building a more participative, just, and inclusive European Union. The European Social Fund, which is an initiative developed to actively promote multinational partnerships that address pressing social issues, is a good example of the European transformation. This article describes the steps taken to develop and evaluate the activities of an international network promoting collaborative capacity among regional partners involved in the prevention of labor discrimination toward immigrants in three European countries-Spain, Belgium, and Italy. An international team of community psychologists proposed an empowering approach to assess the collaborative capacity of the network. This approach consisted of three steps: (1) establishing a collaborative relationship among partners, (2) building collaborative capacity, and (3) evaluating the collaborative capacity of the network. We conclude with lessons learned from the process and provide recommendations for addressing the challenges inherent in international collaboration processes.

Case study on perspicacity of collaborative learning experiences

NASA Astrophysics Data System (ADS)

Abdullah, Fadzidah; Majid, Noor Hanita Abdul; Numen, Ibrahim; Kesuma Azmin, Aida; Abd. Rahim, Zaiton; Denan, Zuraini; Emin Sisman, Muhammet

2017-12-01

In the attempt to relate to the architectural practice, architectural education today has augmented the development of collaborative learning environment in the campus scenario. Presently, collaborative work among students from the same program and university is considered common. Hence, attempts of collaboration is extended into having learning and teaching collaboration by means of inter-universities. The School of Architecture, at the International Islamic University Malaysia (IIUM) has explored into having collaboration across the continent with Fatih Sultan Mehmet Waqf University (FSMWU), among faculty members and students of the two (2) universities This paper explicates the empirical study on students’ perspicacity of their collaborative learning experiences; in term of effectiveness, generative behaviour, and teamwork. Survey with three (3) open-ended questions are distributed to students to express their opinions on learning collaboration that they have had during the execution of the Joint Summer School Program (JSSP). Feedback on their perspicacity is obtained and organised into numerical and understandable data display, using qualitative data processing software. Albeit the relevancy of collaborative learning, students gave both positive and negative feedbacks on their experiences. Suggestions are given to enhance the quality of collaborative learning experience for future development

COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0035: Incorporation of Metal Nanoshells into Photovoltaic Devices

DTIC Science & Technology

2007-07-01

AFRL-RX-WP-TR-2010-4185 COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0035: Incorporation of Metal Nanoshells into Photovoltaic...08 June 2005 – 07 June 2007 4. TITLE AND SUBTITLE COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0035: Incorporation of Metal ...The plasmon resonance in metallic nanoshells can be used to efficiently harvest solar energy and convert it into thermal or electronic form. Possible

Building Bridges: Leveraging Interdisciplinary Collaborations in the Development of Biomaterials to Meet Clinical Needs

PubMed Central

Fong, Eliza L.S.; Watson, Brendan M.; Kasper, F. Kurtis

2013-01-01

Our laboratory at Rice University has forged numerous collaborations with clinicians and basic scientists over the years to advance the development of novel biomaterials and modification of existing materials to meet clinical needs. This review highlights collaborative advances in biomaterials research from our laboratory in the areas of scaffold development, drug delivery and gene therapy, especially as related to applications in bone and cartilage tissue engineering. PMID:22821772

Pairing students in clinical assignments to develop collaboration and communication skills.

PubMed

Bartges, Mali

2012-01-01

Skillful collaboration and communication among healthcare team members are associated with favorable patient outcomes. Student nurses need opportunities for supervised development of these crucial and intertwined skills. The author describes the implementation of a practice-change project for simultaneously developing collaboration and communication skills by pairing prelicensure student nurses in clinical assignments. This easily adapted strategy increases options for faculty looking to stimulate student acquisition of these professional skills.

Collaborative Research and Development (CR&D). Task Order 0049: Tribological Modeling

DTIC Science & Technology

2008-05-01

scratch test for TiN on stainless steel with better substrate mechanical properties. This present study was focused on the study of stress distribution...AFRL-RX-WP-TR-2010-4189 COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0049: Tribological Modeling Young Sup Kang Universal...SUBTITLE COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0049: Tribological Modeling 5a. CONTRACT NUMBER F33615-03-D-5801-0049 5b

An Examination of Collaborative Learning Assessment through Dialogue (CLAD) in Traditional and Hybrid Human Development Courses

ERIC Educational Resources Information Center

McCarthy, Wanda C.; Green, Peter J.; Fitch, Trey

2010-01-01

This investigation assessed the effectiveness of using Collaborative Learning Assessment through Dialogue (CLAD) (Fitch & Hulgin, 2007) with students in undergraduate human development courses. The key parts of CLAD are student collaboration, active learning, and altering the role of the instructor to a guide who enhances learning opportunities.…

Collaborative Research for Sustainable Learning: The Case of Developing Innovation Capabilities at Volvo Cars

ERIC Educational Resources Information Center

Borjesson, Sofia

2011-01-01

This paper aims to make a contribution to the stream of literature on action research by describing a longitudinal collaborative research project which evolved out of a long-term, participation partnership with Volvo Cars. The collaboration was aimed at developing innovation capabilities in the company and accumulating knowledge on how…

Collaborative School Innovation Project as a Pivot for Teachers' Professional Development: The Case of Acharnes' Second Chance School in Greece

ERIC Educational Resources Information Center

Katsarou, Eleni; Tsafos, Vassilis

2008-01-01

A collaborative school innovation project is explored as a pivot for the professional development of the teachers involved. The Second Chance School (SCS) of Acharnes in Greece constitutes such a collaborative innovative project, regarding the underlying theory of multiliteracies, its decentralised character, respect for student individuality, and…

Exploring the Benefits of a Collaborative Inquiry Team in Education (CITE) Initiative to Develop a Research Community and Enhance Student Engagement

ERIC Educational Resources Information Center

Cantalini-Williams, Maria; Curtis, Debra; Eden-DeGasperis, Kimberley; Esposto, Lauren; Guibert, Jenny; Papp, Heather; Roque, Carlos

2015-01-01

This study examined a collaborative inquiry process, facilitated by university faculty in an elementary school, intended to develop a research community, foster knowledge mobilization, and enhance student engagement. The Collaborative Inquiry Team in Education (CITE) initiative consisted of five school-based sessions that included videos,…

Trends in Professional Development for and Collaboration by Health Education Teachers--41 States, 2000-2010

ERIC Educational Resources Information Center

Brener, Nancy D.; McManus, Tim; Wechsler, Howell; Kann, Laura

2013-01-01

Background: Professional development (PD) and collaboration help ensure the quality of school health education. The purpose of this study was to examine trends in the percentage of lead health education teachers (LHETs) receiving PD on health topics and collaborating with other school staff on health education activities. Methods: This study…

Teaching Early Childhood Assessment Online: A State-Wide Multi-University Collaboration

ERIC Educational Resources Information Center

Murray, Ann D.; McDonald, Angie; York, Marti A.

2006-01-01

This paper describes an online early childhood assessment course that was developed through a multi-university collaboration with support from a state improvement grant. Collaborators from three universities developed the course to address a new early childhood unified license (birth to age 8, regular and special education) in the state of Kansas.…

A Design and Development of Distance Learning Support Environment for Collaborative Problem Solving in Group Learners

ERIC Educational Resources Information Center

Nitta, Takuya; Takaoka, Ryo; Ahama, Shigeki; Shimokawa, Masayuki

2014-01-01

The competency and curriculum for human resource development in knowledge based society are proposed in each country. We think the keywords are "collaborative problem solving" and "effective use of ICT". In particular, the competency to perform the collaborative problem solving and learning with others on the network is…

Data Processing for the Space-Based Desis Hyperspectral Sensor

NASA Astrophysics Data System (ADS)

Carmona, E.; Avbelj, J.; Alonso, K.; Bachmann, M.; Cerra, D.; Eckardt, A.; Gerasch, B.; Graham, L.; Günther, B.; Heiden, U.; Kerr, G.; Knodt, U.; Krutz, D.; Krawcyk, H.; Makarau, A.; Miller, R.; Müller, R.; Perkins, R.; Walter, I.

2017-05-01

The German Aerospace Center (DLR) and Teledyne Brown Engineering (TBE) have established a collaboration to develop and operate a new space-based hyperspectral sensor, the DLR Earth Sensing Imaging Spectrometer (DESIS). DESIS will provide spacebased hyperspectral data in the VNIR with high spectral resolution and near-global coverage. While TBE provides the platform and infrastructure for operation of the DESIS instrument on the International Space Station, DLR is responsible for providing the instrument and the processing software. The DESIS instrument is equipped with novel characteristics for an imaging spectrometer such high spectral resolution (2.55 nm), a mirror pointing unit or a CMOS sensor operated in rolling shutter mode. We present here an overview of the DESIS instrument and its processing chain, emphasizing the effect of the novel characteristics of DESIS in the data processing and final data products. Furthermore, we analyse in more detail the effect of the rolling shutter on the DESIS data and possible mitigation/correction strategies.

Molecular electronics: The technology of sixth generation computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jarvis, M.T.; Miller, R.K.

1987-01-01

In February 1986, Japan began the 6th Generation project. At the 1987 Economic Summit in Venice, Prime Minister Yashuhiro Makasone opened the project to world collaboration. A project director suggests that the 6th Generation ''may just be a turning point for human society.'' The major rationale for building molecular electronic devices is to achieve advances in computational densities and speeds. Proposed chromophore chains for molecular-scale chips, for example, could be spaced closer than today's silicone elements by a factor of almost 100. This book describes the research and proposed designs for molecular electronic devices and computers. It examines specific potentialmore » applications and the relationship to molecular electronics to silicon technology and presents the first published survey of experts on research issues, applications, and forecast of future developments and also includes market forecast. An interesting suggestion of the survey is that the chemical industry may become a significant factor in the computer industry as the sixth generation unfolds.« less

The digital eczema centre utrecht.

PubMed

van Os-Medendorp, Harmieke; van Veelen, Carien; Hover, Maaike; Eland-de Kok, Petra; Bruijnzeel-Koomen, Carla; Sonnevelt, Gert-Jan; Mensing, Geert; Pasmans, Suzanne

2010-01-01

The University Medical Centre Utrecht (UMC Utrecht) has developed an eczema portal that combines e-consulting, monitoring and self-management training by a dermatology nurse online for patients and parents of young children with atopic dermatitis (AD). Patient satisfaction with the portal was high. It could be extended to become a Digital Eczema Centre for multidisciplinary collaboration between health-care providers from different locations and the patient. Before starting the construction of the Digital Eczema Centre, the feasibility was examined by carrying out a business case analysis. The purposes, strength and weaknesses showed that the Digital Eczema Centre offered opportunities to improve care for patients with AD. The financial analysis resulted in a medium/best case scenario with a positive result of euro50-240,000 over a period of five years. We expect that the Digital Eczema Centre will increase the accessibility and quality of care. The web-based patient record and the digital chain-of-care promote the involvement of patients, parents and multidisciplinary teams as well as the continuity and coordination of care.

Regulatory Underpinnings of Global Health Security: FDA's Roles in Preventing, Detecting, and Responding to Global Health Threats

PubMed Central

Bond, Katherine C.; Maher, Carmen

2014-01-01

In February 2014, health officials from around the world announced the Global Health Security Agenda, a critical effort to strengthen national and global systems to prevent, detect, and respond to infectious disease threats and to foster stronger collaboration across borders. With its increasing global roles and broad range of regulatory responsibilities in ensuring the availability, safety, and security of medical and food products, the US Food and Drug Administration (FDA) is engaged in a range of efforts in support of global health security. This article provides an overview of FDA's global health security roles, focusing on its responsibilities related to the development and use of medical countermeasures (MCMs) for preventing, detecting, and responding to global infectious disease and other public health emergency threats. The article also discusses several areas—antimicrobial resistance, food safety, and supply chain integrity—in which FDA's global health security roles continue to evolve and extend beyond MCMs and, in some cases, beyond traditional infectious disease threats. PMID:25254912

Regulatory underpinnings of Global Health security: FDA's roles in preventing, detecting, and responding to global health threats.

PubMed

Courtney, Brooke; Bond, Katherine C; Maher, Carmen

2014-01-01

In February 2014, health officials from around the world announced the Global Health Security Agenda, a critical effort to strengthen national and global systems to prevent, detect, and respond to infectious disease threats and to foster stronger collaboration across borders. With its increasing global roles and broad range of regulatory responsibilities in ensuring the availability, safety, and security of medical and food products, the US Food and Drug Administration (FDA) is engaged in a range of efforts in support of global health security. This article provides an overview of FDA's global health security roles, focusing on its responsibilities related to the development and use of medical countermeasures (MCMs) for preventing, detecting, and responding to global infectious disease and other public health emergency threats. The article also discusses several areas-antimicrobial resistance, food safety, and supply chain integrity-in which FDA's global health security roles continue to evolve and extend beyond MCMs and, in some cases, beyond traditional infectious disease threats.

Optimizing Distribution of Pandemic Influenza Antiviral Drugs

PubMed Central

Huang, Hsin-Chan; Morton, David P.; Johnson, Gregory P.; Gutfraind, Alexander; Galvani, Alison P.; Clements, Bruce; Meyers, Lauren A.

2015-01-01

We provide a data-driven method for optimizing pharmacy-based distribution of antiviral drugs during an influenza pandemic in terms of overall access for a target population and apply it to the state of Texas, USA. We found that during the 2009 influenza pandemic, the Texas Department of State Health Services achieved an estimated statewide access of 88% (proportion of population willing to travel to the nearest dispensing point). However, access reached only 34.5% of US postal code (ZIP code) areas containing <1,000 underinsured persons. Optimized distribution networks increased expected access to 91% overall and 60% in hard-to-reach regions, and 2 or 3 major pharmacy chains achieved near maximal coverage in well-populated areas. Independent pharmacies were essential for reaching ZIP code areas containing <1,000 underinsured persons. This model was developed during a collaboration between academic researchers and public health officials and is available as a decision support tool for Texas Department of State Health Services at a Web-based interface. PMID:25625858

[European innovation partnership on active and healthy aging: moving from policy to action].

PubMed

García Lizana, Francisca

2013-01-01

Demographic change and aging are a common challenge in Europe. The rising number of elderly people will need support at home, and will consume more healthcare services, putting further pressure on the welfare system. Collaborative, integrated and people-centered care provision, whether in hospitals, homes or in the community, is a way forward to sustainable and efficient care systems. Innovative treatments to address chronic diseases and the functional decline of older people will enable them to live longer in better health and with a better quality of life. To fully unleash the potential of aging in the European Union, the European Commission -within its Innovation Union policy- launched the first European Innovation Partnership on Active and Healthy Ageing (EIP AHA). Promoting engagement and partnerships among all stakeholders in the healthcare chain is essential. This article describes the theoretical foundations, the development and expectations of the initiative, and its first actions. Copyright © 2012 SESPAS. Published by Elsevier Espana. All rights reserved.

Collaboration between Academics and Teachers: A Complex Relationship

ERIC Educational Resources Information Center

Bevins, Stuart; Price, Gareth

2014-01-01

Collaboration between academics and teachers has become increasingly prevalent over recent years. Whether its aim is joint research or continuing professional development for teachers, collaboration seems to offer a realistic opportunity for reducing the perceived gap between theory and practice. However, collaboration is not merely academics and…

The Many Faces of School-University Collaboration: Characteristics of Successful Partnerships.

ERIC Educational Resources Information Center

Ravid, Ruth, Ed.; Handler, Marianne G., Ed.

This book is designed to help educators entering into school-university collaborative relationships have a clearer picture of conditions that drive successful partnerships. The models described include collaboration between a university and professional development school, consultation, one-to-one collaborations, and multiple collaboration…

Understanding Nomadic Collaborative Learning Groups

ERIC Educational Resources Information Center

Ryberg, Thomas; Davidsen, Jacob; Hodgson, Vivien

2018-01-01

The paper builds on the work of Rossitto "et al." on collaborative nomadic work to develop three categories of practice of nomadic collaborative learning groups. Our study is based on interviews, workshops and observations of two undergraduate student's group practices engaged in self-organised, long-term collaborations within the frame…

78 FR 12832 - Request for Information: Public-Private Collaborations in Pain Research

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

... DEPARTMENT OF VETERANS AFFAIRS Request for Information: Public-Private Collaborations in Pain... Veterans Affairs (VA) publishes this Request for Information (RFI) on public-private collaborations in pain...-private collaborations in pain research with the intent of developing novel therapies that will benefit...

Supporting Awareness for Augmenting Participation in Collaborative Learning.

ERIC Educational Resources Information Center

Ogata, Hiroaki; Yano, Yoneo

This paper describes Coconuts (Concurrent Collaborative Learning Environment Supported by Awareness), a proposed module of Sharlok (Sharing, Linking and Looking-for Knowledge), an open-ended and collaborative learning environment that integrates a knowledge building tool with a collaborative interface tool. Coconuts was developed in order to…

The Impact of Collaborative Reflections on Teachers' Inquiry Teaching

ERIC Educational Resources Information Center

Lin, Huann-shyang; Hong, Zuway-R.; Yang, Kuay-keng; Lee, Sung-Tao

2013-01-01

This study investigates the impact of collaborative reflections on teachers' inquiry teaching practices and identifies supportive actions relating to their professional development. Three science teachers in the same elementary school worked as a cooperative and collaborative group. They attended workshops and worked collaboratively through…

Collaboration in health services research: on developing relationships between VA researchers and those in other institutions.

PubMed Central

Greenlick, M R; Freeborn, D K

1986-01-01

This article explores the potential for collaboration between investigators in institutions outside of the VA and those engaged in research within the VA. The focus is on the potential for collaborative work in health services research; our perspective is that of researchers in a freestanding HMO research center affiliated with the Veterans Administration's Northwest Health Services Research and Development Field Program. The paper begins with a review of the reasons that make collaboration between VA researchers and other health services researchers so appropriate at this time. An example of collaboration is presented, drawing on the experience of the Northwest Field Program and the Kaiser Permanente Center for Health Research. Finally, some difficulties inherent in collaboration between VA and other health services researchers are discussed. PMID:3512485

Academic Primer Series: Five Key Papers about Team Collaboration Relevant to Emergency Medicine.

PubMed

Gottlieb, Michael; Grossman, Catherine; Rose, Emily; Sanderson, William; Ankel, Felix; Swaminathan, Anand; Chan, Teresa M

2017-02-01

Team collaboration is an essential for success both within academics and the clinical environment. Often, team collaboration is not explicitly taught during medical school or even residency, and must be learned during one's early career. In this article, we aim to summarize five key papers about team collaboration for early career clinician educators. We conducted a consensus-building process among the writing team to generate a list of key papers that describe the importance or significance of team collaboration, seeking input from social media sources. The authors then used a three-round voting methodology akin to a Delphi study to determine the most important papers from the initially generated list. The five most important papers on the topic of team collaboration, as determined by this mixed group of junior faculty members and faculty developers, are presented in this paper. For each included publication, a summary was provided along with its relevance to junior faculty members and faculty developers. Five key papers about team collaboration are presented in this publication. These papers provide a foundational background to help junior faculty members with collaborating in teams both clinically and academically. This list may also inform senior faculty and faculty developers about the needs of junior faculty members.

Developing effective interuniversity partnerships and community-based research to address health disparities.

PubMed

Carey, Timothy S; Howard, Daniel L; Goldmon, Moses; Roberson, James T; Godley, Paul A; Ammerman, Alice

2005-11-01

Health disparities are an enormous challenge to American society. Addressing these disparities is a priority for U.S. society and especially for institutions of higher learning, with their threefold mission of education, service, and research. Collaboration across multiple intellectual disciplines will be critical as universities address health disparities. In addition, universities must collaborate with communities, with state partners, and with each other. Development of these collaborations must be sensitive to the history and unique characteristics of each academic institution and population. The authors describe the challenges of all three types of collaboration, but primarily focus on collaboration between research-intensive universities and historically black colleges and universities. The authors describe a four-year collaboration between Shaw University and the University of North Carolina at Chapel Hill (UNC-CH). These universities strategically developed multiple research initiatives to address health disparities, building on modest early success and personal relationships. These activities included participation by Shaw faculty in faculty development activities, multiple collaborative pilot studies, and joint participation in securing grants from the Agency for Health care Research and Quality of the federal Department of Health and Human Services and the National Institutes of Health, including a P-60 Project EXPORT center grant. These multiple activities were sometimes led by UNC-CH, sometimes by Shaw University. Open discussion of problems as they arose, realistic expectations, and mutual recognition of the strengths of each institution and its faculty have been critical in achieving successful collaboration to date.

Developing Effective Interuniversity Partnerships and Community-Based Research to Address Health Disparities

PubMed Central

Carey, Timothy S.; Howard, Daniel L.; Goldmon, Moses; Roberson, James T.; Godley, Paul A.; Ammerman, Alice

2009-01-01

Health disparities are an enormous challenge to American society. Addressing these disparities is a priority for U.S. society and especially for institutions of higher learning, with their threefold mission of education, service, and research. Collaboration across multiple intellectual disciplines will be critical as universities address health disparities. In addition, universities must collaborate with communities, with state partners, and with each other. Development of these collaborations must be sensitive to the history and unique characteristics of each academic institution and population. The authors describe the challenges of all three types of collaboration, but primarily focus on collaboration between research-intensive universities and historically black colleges and universities. The authors describe a four-year collaboration between Shaw University and the University of North Carolina at Chapel Hill (UNC-CH). These universities strategically developed multiple research initiatives to address health disparities, building on modest early success and personal relationships. These activities included participation by Shaw faculty in faculty development activities, multiple collaborative pilot studies, and joint participation in securing grants from the Agency for Health care Research and Quality of the federal Department of Health and Human Services and the National Institutes of Health, including a P-60 Project EXPORT center grant. These multiple activities were sometimes led by UNC-CH, sometimes by Shaw University. Open discussion of problems as they arose, realistic expectations, and mutual recognition of the strengths of each institution and its faculty have been critical in achieving successful collaboration to date. PMID:16249303

Collaborative data model and data base development for paleoenvironmental and archaeological domain using Semantic MediaWiki

NASA Astrophysics Data System (ADS)

Willmes, C.

2017-12-01

In the frame of the Collaborative Research Centre 806 (CRC 806) an interdisciplinary research project, that needs to manage data, information and knowledge from heterogeneous domains, such as archeology, cultural sciences, and the geosciences, a collaborative internal knowledge base system was developed. The system is based on the open source MediaWiki software, that is well known as the software that enables Wikipedia, for its facilitation of a web based collaborative knowledge and information management platform. This software is additionally enhanced with the Semantic MediaWiki (SMW) extension, that allows to store and manage structural data within the Wiki platform, as well as it facilitates complex query and API interfaces to the structured data stored in the SMW data base. Using an additional open source software called mobo, it is possible to improve the data model development process, as well as automated data imports, from small spreadsheets to large relational databases. Mobo is a command line tool that helps building and deploying SMW structure in an agile, Schema-Driven Development way, and allows to manage and collaboratively develop the data model formalizations, that are formalized in JSON-Schema format, using version control systems like git. The combination of a well equipped collaborative web platform facilitated by Mediawiki, the possibility to store and query structured data in this collaborative database provided by SMW, as well as the possibility for automated data import and data model development enabled by mobo, result in a powerful but flexible system to build and develop a collaborative knowledge base system. Furthermore, SMW allows the application of Semantic Web technology, the structured data can be exported into RDF, thus it is possible to set a triple-store including a SPARQL endpoint on top of the database. The JSON-Schema based data models, can be enhanced into JSON-LD, to facilitate and profit from the possibilities of Linked Data technology.

Collaboration as a process and an outcome: Consumer experiences of collaborating with nurses in care planning in an acute inpatient mental health unit.

PubMed

Reid, Rebecca; Escott, Phil; Isobel, Sophie

2018-04-14

This qualitative study explores inpatient mental health consumer perceptions of how collaborative care planning with mental health nurses impacts personal recovery. Semi-structured interviews were conducted with consumers close to discharge from one unit in Sydney, Australia. The unit had been undertaking a collaborative care planning project which encouraged nurses to use care plan documentation to promote person-centred and goal-focussed interactions and the development of meaningful strategies to aid consumer recovery. The interviews explored consumer understandings of the collaborative care planning process, perceptions of the utility of the care plan document and the process of collaborating with the nurses, and their perception of the impact of collaboration on their recovery. Findings are presented under four organizing themes: the process of collaborating, the purpose of collaborating, the nurse as collaborator and the role of collaboration in wider care and recovery. Consumers highlighted the importance of the process of developing their care plan with a nurse as being as helpful for recovery as the goals and strategies themselves. The findings provide insights into consumers' experiences of care planning in an acute inpatient unit, the components of care that support recovery and highlight specific areas for mental health nursing practice improvement in collaboration. © 2018 Australian College of Mental Health Nurses Inc.

Research Collaboration across Higher Education Systems: Maturity, Language Use, and Regional Differences

ERIC Educational Resources Information Center

Shin, Jung Cheol; Lee, Soo Jeung; Kim, Yangson

2013-01-01

This study analyzed whether research collaboration patterns differ across higher education systems based on maturity of the systems, their language, and their geographical region. This study found that collaboration patterns differ across higher education systems: academics in developed systems are more collaborative than their colleagues in…

Implementing Collaborative Design in the Next Series of eLearning Platforms

ERIC Educational Resources Information Center

Kropf, Dorothy

2013-01-01

Collaborative design empowers learning management system (LMS) providers and end users (online students) to develop a vibrant teaching and learning community. Successful periodic collaborations utilizing collaborative web tools between these two pivotal groups can produce the next series of eLearning platforms that are fertile grounds for…

Online Student Collaboration and FERPA Considerations

ERIC Educational Resources Information Center

Schrameyer, Alexander R.; Graves, Tracy M.; Hua, David M.; Brandt, Nile C.

2016-01-01

The increasing use of online or cloud collaboration tools in organizations creates a need for students to develop skills in the use of these tools. Instructors have an opportunity to prepare students by incorporating these collaboration tools into their courses. The use of these online collaboration tools has the potential to expose instructors…

Strengthening Collaborative Leadership for Thai Primary School Administrators

ERIC Educational Resources Information Center

Samriangjit, Prapaporn; Tesaputa, Kowat; Somprach, Kanokorn

2016-01-01

The objectives of this research were: 1) to investigate the elements and indicators of collaborative leadership of primary school administrators, 2) to explore the existing situation and required situation of collaborative leadership of primary school administrators, 3) to develop a program to enhance collaborative leadership of primary school…

Continuing Challenges and Potential for Collaborative Approaches to Education Reform

ERIC Educational Resources Information Center

Bodilly, Susan J.; Karam, Rita; Orr, Nate

2011-01-01

The Ford Foundation began the Collaborating for Education Reform Initiative (CERI) in 1997-1998 by issuing grants and providing grantees with funds, guidance, and technical assistance to develop collaboratives and carry out activities to improve teaching and learning. CERI's collaborative activities were directed at three possible community…

STEAM-y Partnerships: A Case of Interdisciplinary Professional Development and Collaboration

ERIC Educational Resources Information Center

Kelton, Molly L.; Saraniero, Patti

2018-01-01

Museum partnerships can involve significant tensions, especially when these collaborations reach across institutions to blend disciplines such as art and mathematics. Rather than simply being obstacles to overcome, we suggest that tensions arising in multi-institutional, cross-disciplinary collaborations can be highly generative for collaborators,…

University Industry Collaboration and Graduates' Unemployment in Ondo State, Nigeria

ERIC Educational Resources Information Center

Adepoju, O. O.; Adedeji, A. O

2015-01-01

Research evidence shows that university industry collaboration presents a wide range of benefits to industries, higher institutions, and to the development of a nation. This study investigated the existence of university industry collaboration, the factors militating against the collaboration, and the extent to which university industry…

Leading, Managing and Participating in Inter-University Teaching Grant Collaborations

ERIC Educational Resources Information Center

Willcoxson, Lesley; Kavanagh, Marie; Cheung, Lily

2011-01-01

In this paper we examine the leadership and management of multi-university collaborations funded by national teaching grants. The paper commences with a review of literature relating to stages of project development, key operational issues, impediments to collaboration and the leadership and management of teaching grant collaborations. Finally, we…

Supporting the "Collaborative" Part of Wiki-Mediated Collaborative Learning Activities

ERIC Educational Resources Information Center

Larusson, Johann Ari

2010-01-01

Prior research has highlighted the educational benefit of enabling students to participate in collaborative learning activities. Developing technology that extends the physical boundaries of the classroom and enables students to engage in meaningful collaborative learning activities outside class time can be of significant value. For any…

Numerical investigations on the lateral angular co-extrusion of aluminium and steel

NASA Astrophysics Data System (ADS)

Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J.

2018-05-01

In order to save weight and costs, different materials can be combined within one component. In the novel process chain being developed within the Collaborative Research Centre (CRC) 1153, joined semi-finished workpieces are used to produce hybrid solid components with locally adapted properties. Different materials are joined in an initial step before the forming process takes place. Hereby, the quality of the joining zone is improved by means of the thermo-mechanical treatment during the forming and machining processes. The lateral angular co-extrusion (LACE) approach is used to produce semi-finished workpieces because it allows for the production of coaxial semi-finished products consisting of aluminium and steel. In the further process chain, these semi-finished products are processed into hybrid bearing bushings with locally adapted properties by die forging. In the scope of this work, numerical investigations of the co-extrusion of aluminium-steel compounds were carried out using finite element (FE) simulation in order to examine the influence of the process parameters on the co-extrusion process. For this purpose, the relevant material properties of the aluminium alloy EN AW-6082 were determined experimentally and subsequently implemented in the numerical model. The obtained numerical model was used to study the impact of different ram speeds, press ratios and billet temperatures on the resulting extrusion forces and the material flow. The numerical results have been validated using force-time curves obtained from experimental extrusion tests carried out on a 2.5 MN laboratory extrusion press.

Successful pregnancy in maple syrup urine disease: a case report and review of the literature.

PubMed

Grünert, Sarah Catharina; Rosenbaum-Fabian, Stefanie; Schumann, Anke; Schwab, Karl Otfried; Mingirulli, Nadja; Spiekerkoetter, Ute

2018-05-12

Maple syrup urine disease (MSUD) is an autosomal recessive disorder of branched-chain amino acid metabolism. Patients with MSUD are at risk of life-threatening metabolic decompensations with ketoacidosis and encephalopathy. These episodes are often triggered by physiological stress. Only few cases of pregnancies in MSUD mothers have been reported so far. We present the favorable outcome of a pregnancy in a woman with classical MSUD. She presented in the metabolic outpatient clinic in week 7 of gestation. Branched-chain amino acid concentrations were measured at least weekly to adjust dietary leucine intake. Despite excellent compliance, leucine concentrations frequently exceeded the target value of < 300 μmol/L during the first trimester. From the second trimester until delivery, protein and leucine intake increased continuously to about threefold compared to pre-pregnancy values. To maximize patient safety during delivery and the postpartum period, a detailed plan including peripartal infusion therapy, dietary recommendations and monitoring parameters was developed. Primary Caesarean section was performed in week 38 of gestation, and the patient gave birth to a healthy girl. Lactation was successfully implemented. Leucine levels were maintained within the target range throughout the complete postpartum period. In addition to our case, we give an overview about all cases of pregnancies in MSUD mothers published so far. Management of pregnancy, delivery, postpartum period and lactation may be challenging in patients with MSUD. Careful monitoring and interdisciplinary collaboration is essential to minimize the risk of metabolic crisis, especially after delivery.

Meeting the requirements of importing countries: practice and policy for on-farm approaches to food safety.

PubMed

Dagg, P J; Butler, R J; Murray, J G; Biddle, R R

2006-08-01

In light of the increasing consumer demand for safe, high-quality food and recent public health concerns about food-borne illness, governments and agricultural industries are under pressure to provide comprehensive food safety policies and programmes consistent with international best practice. Countries that export food commodities derived from livestock must meet both the requirements of the importing country and domestic standards. It is internationally accepted that end-product quality control, and similar methods aimed at ensuring food safety, cannot adequately ensure the safety of the final product. To achieve an acceptable level of food safety, governments and the agricultural industry must work collaboratively to provide quality assurance systems, based on sound risk management principles, throughout the food supply chain. Quality assurance systems on livestock farms, as in other parts of the food supply chain, should address food safety using hazard analysis critical control point principles. These systems should target areas including biosecurity, disease monitoring and reporting, feedstuff safety, the safe use of agricultural and veterinary chemicals, the control of potential food-borne pathogens and traceability. They should also be supported by accredited training programmes, which award certification on completion, and auditing programmes to ensure that both local and internationally recognised guidelines and standards continue to be met. This paper discusses the development of policies for on-farm food safety measures and their practical implementation in the context of quality assurance programmes, using the Australian beef industry as a case study.

Faculty Development for Continuing Interprofessional Education and Collaborative Practice

ERIC Educational Resources Information Center

Silver, Ivan L.; Leslie, Karen

2009-01-01

This article proposes a framework for faculty development in continuing interprofessional education (CIPE) and collaborative practice. The framework is built on best practices in faculty development and CIPE. It was informed by local experience in the development, delivery, and evaluation of a faculty development program to promote capacity for…

Skill Transfer and Virtual Training for IND Response Decision-Making: Models for Government-Industry Collaboration for the Development of Game-Based Training Tools

DTIC Science & Technology

2016-05-05

Training for IND Response Decision-Making: Models for Government–Industry Collaboration for the Development of Game -Based Training Tools R.M. Seater...Skill Transfer and Virtual Training for IND Response Decision-Making: Models for Government–Industry Collaboration for the Development of Game -Based...unlimited. This page intentionally left blank. iii EXECUTIVE SUMMARY Game -based training tools, sometimes called “serious games ,” are becoming

e-Collaboration for Earth observation (E-CEO): the Cloud4SAR interferometry data challenge

NASA Astrophysics Data System (ADS)

Casu, Francesco; Manunta, Michele; Boissier, Enguerran; Brito, Fabrice; Aas, Christina; Lavender, Samantha; Ribeiro, Rita; Farres, Jordi

2014-05-01

The e-Collaboration for Earth Observation (E-CEO) project addresses the technologies and architectures needed to provide a collaborative research Platform for automating data mining and processing, and information extraction experiments. The Platform serves for the implementation of Data Challenge Contests focusing on Information Extraction for Earth Observations (EO) applications. The possibility to implement multiple processors within a Common Software Environment facilitates the validation, evaluation and transparent peer comparison among different methodologies, which is one of the main requirements rose by scientists who develop algorithms in the EO field. In this scenario, we set up a Data Challenge, referred to as Cloud4SAR (http://wiki.services.eoportal.org/tiki-index.php?page=ECEO), to foster the deployment of Interferometric SAR (InSAR) processing chains within a Cloud Computing platform. While a large variety of InSAR processing software tools are available, they require a high level of expertise and a complex user interaction to be effectively run. Computing a co-seismic interferogram or a 20-years deformation time series on a volcanic area are not easy tasks to be performed in a fully unsupervised way and/or in very short time (hours or less). Benefiting from ESA's E-CEO platform, participants can optimise algorithms on a Virtual Sandbox environment without being expert programmers, and compute results on high performing Cloud platforms. Cloud4SAR requires solving a relatively easy InSAR problem by trying to maximize the exploitation of the processing capabilities provided by a Cloud Computing infrastructure. The proposed challenge offers two different frameworks, each dedicated to participants with different skills, identified as Beginners and Experts. For both of them, the contest mainly resides in the degree of automation of the deployed algorithms, no matter which one is used, as well as in the capability of taking effective benefit from a parallel computing environment.

Developing Distributed Collaboration Systems at NASA: A Report from the Field

NASA Technical Reports Server (NTRS)

Becerra-Fernandez, Irma; Stewart, Helen; Knight, Chris; Norvig, Peter (Technical Monitor)

2001-01-01

Web-based collaborative systems have assumed a pivotal role in the information systems development arena. While business to customers (B-to-C) and business to business (B-to-B) electronic commerce systems, search engines, and chat sites are the focus of attention, web-based systems span the gamut of information systems that were traditionally confined to internal organizational client server networks. For example, the Domino Application Server allows Lotus Notes (trademarked) uses to build collaborative intranet applications and mySAP.com (trademarked) enables web portals and e-commerce applications for SAP users. This paper presents the experiences in the development of one such system: Postdoc, a government off-the-shelf web-based collaborative environment. Issues related to the design of web-based collaborative information systems, including lessons learned from the development and deployment of the system as well as measured performance, are presented in this paper. Finally, the limitations of the implementation approach as well as future plans are presented as well.

A close collaboration of chitosan with lipid colloidal carriers for drug delivery applications.

PubMed

Bugnicourt, Loïc; Ladavière, Catherine

2017-06-28

Chitosan and lipid colloids have separately shown a growing interest in the field of drug delivery applications. Their success is mainly due to their interesting physicochemical behaviors, as well as their biological properties such as bioactivity and biocompatibility. While chitosan is a well-known cationic polysaccharide with the ability to strongly interact with drugs and biological matrices through mainly electrostatic interactions, lipid colloids are carriers particularly recognized for the drug vectorization. In recent years, the combination of both entities has been considered because it offers new systems which gather the advantages of each of them to efficiently deliver various types of bioactive species. The purpose of this review is to describe these associations between chemically-unmodified chitosan chains (solubilized or dispersed) and lipid colloids (as nanoparticles or organized in lipid layers), as well as their potential in the drug delivery area so far. Three assemblies have mainly been reported in the literature: i) lipid nanoparticles (solid lipid nanoparticles or nanostructured lipid carriers) coated with chitosan chains, ii) lipid vesicles covered with chitosan chains, and iii) chitosan chains structured in nanoparticles with a lipid coating. Their elaboration processes, their physicochemical characterization, and their biological studies are detailed and discussed herein. The different bioactive species (drugs and bio(macro)molecules) incorporated in these assemblies, their maximal incorporation efficiency, and their loading capacity are also presented. This review reveals the versatility of these assemblies. Depending on the organization of lipids (i.e., nanoparticles or vesicles) and the state of polymer chains (i.e., solubilized or dispersed under the form of nanoparticles), a large variety of drugs can be successfully incorporated, and various routes of administration can be considered. Copyright © 2017 Elsevier B.V. All rights reserved.

Rheology modification with ring polymers

NASA Astrophysics Data System (ADS)

Vlassopoulos, Dimitris

It is now established that experimental unconcatenated ring polymers can be purified effectively by means of fractionation at the critical condition. For molecular weights well above the entanglement threshold, purified rings relax stress via power-law (with an exponent of about -0.4), sharply departing from their linear counterparts. Experimental results are in harmony with modeling predictions and simulations. Here, we present results from recent interdisciplinary efforts and discuss two challenges: (i) the nonlinear shear rheology of purified ring melts is also very different from that of unlinked chains. Whereas the latter exhibit features that can be explained, to a first approach, in the framework in the tube model, the former behave akin to unentangled chains with finite extensibility and exhibit much small deformation at steady state. (ii) blends of rings and linear polymers exhibit unique features in different regimes: The addition of minute amounts of linear chains drastically affects ring dynamics. This relates to ring purity and the ability of unlinked linear chains to thread rings. With the help of simulations, it is possible to rationalize the observed surprisingly slow viscoelastic relaxation, which is attributed to ring-linear and ring-ring penetrations. On the other hand, adding small amounts of rings to linear polymers of different molecular weights influences their linear and nonlinear rheology in an unprecedented way. The blend viscosity exceeds that of the slower component (linear) in this non-interacting mixture, and its dependencies on composition and molecular weight ratio are examined, whereas the role of molecular architecture is also addressed. Consequently, closing the ends of a linear chain can serve as a powerful means for molecular manipulation of its rheology. This presentation reflects collaborative efforts with S. Costanzo, Z-C. Yan, R. Pasquino, M. Kaliva, S. Kamble, Y. Jeong, P. Lutz, J. Allgaier, T. Chang, D. Talikis, V. Mavrantzas and M. Rubinstein.

Expanding the Professional Development School Model: Developing Collaborative Partnerships with School Counselors

ERIC Educational Resources Information Center

Foust, Gretchen E.; Goslee, Patricia A.

2014-01-01

The Professional Development School (PDS) model, a successful collaborative partnership model between university teacher education programs and P-12 schools, focuses on ''preparing future educators, providing current educators with ongoing professional development, encouraging joint school-university faculty investigation of education-related…

Interdisciplinary Collaboration between Natural and Social Sciences – Status and Trends Exemplified in Groundwater Research

PubMed Central

Seidl, Roman

2017-01-01

Interdisciplinary collaboration, particularly between natural and social sciences, is perceived as crucial to solving the significant challenges facing humanity. However, despite the need for such collaboration being expressed more frequently and intensely, it remains unclear to what degree such collaboration actually takes place, what trends and developments there are and which actors are involved. Previous studies, often based on bibliometric analysis of large bodies of literature, partly observed an increase in interdisciplinary collaboration in general, but in particular, the collaboration among distant fields was less explored. Other more qualitative studies found that interdisciplinary collaboration, particularly between natural and social scientists was not well developed, and obstacles abounded. To shed some light on the actual status and developments of this collaboration, we performed an analysis based on a sample of articles on groundwater research. We first identified journals and articles therein that potentially combined natural and social science aspects of groundwater research. Next, we analysed the disciplinary composition of their authors’ teams, cited references, titles and keywords, making use of our detailed personal expertise in groundwater research and its interdisciplinary aspects. We combined several indicators developed from this analysis into a final classification of the degree of multidisciplinarity of each article. Covering the period between 1990 and 2014, we found that the overall percentage of multidisciplinary articles was in the low single-digit range, with only slight increases over the past decades. The interdisciplinarity of individuals plays a major role compared to interdisciplinarity involving two or more researchers. If collaboration with natural sciences takes place, social science is represented most often by economists. As a side result, we found that journals publishing multidisciplinary research had lower impact factors on average, and multidisciplinary papers were cited much less than mono-disciplinary ones. PMID:28129352

Global scientific collaboration in COPD research

PubMed Central

Su, Yanbing; Long, Chao; Yu, Qi; Zhang, Juan; Wu, Daisy; Duan, Zhiguang

2017-01-01

Purpose This study aimed to investigate the multiple collaboration types, quantitatively evaluate the publication trends and review the performance of institutions or countries (regions) across the world in COPD research. Materials and methods Scientometric methods and social network analysis were used to survey the development of publication trends and understand current collaboration in the field of COPD research based on the Web of Science publications during the past 18 years. Results The number of publications developed through different collaboration types has increased. Growth trends indicate that the percentage of papers authored through multinational and domestic multi-institutional collaboration (DMIC) have also increased. However, the percentage of intra-institutional collaboration and single-authored (SA) studies has reduced. The papers that produced the highest academic impact result from international collaboration. The second highest academic impact papers are produced by DMIC. Out of the three, the papers that are produced by SA studies have the least amount of impact upon the scientific community. A handful of internationally renowned institutions not only take the leading role in the development of the research within their country (region) but also play a crucial role in international research collaboration in COPD. Both the amount of papers produced and the amount of cooperation that occurs in each study are disproportionally distributed between high-income countries (regions) and low-income countries (regions). Growing attention has been generated toward research on COPD from more and more different academic domains. Conclusion Despite the rapid development in COPD research, collaboration in the field of COPD research still has room to grow, especially between different institutions or countries (regions), which would promote the progress of global COPD research. PMID:28123294

Interdisciplinary Collaboration between Natural and Social Sciences - Status and Trends Exemplified in Groundwater Research.

PubMed

Barthel, Roland; Seidl, Roman

2017-01-01

Interdisciplinary collaboration, particularly between natural and social sciences, is perceived as crucial to solving the significant challenges facing humanity. However, despite the need for such collaboration being expressed more frequently and intensely, it remains unclear to what degree such collaboration actually takes place, what trends and developments there are and which actors are involved. Previous studies, often based on bibliometric analysis of large bodies of literature, partly observed an increase in interdisciplinary collaboration in general, but in particular, the collaboration among distant fields was less explored. Other more qualitative studies found that interdisciplinary collaboration, particularly between natural and social scientists was not well developed, and obstacles abounded. To shed some light on the actual status and developments of this collaboration, we performed an analysis based on a sample of articles on groundwater research. We first identified journals and articles therein that potentially combined natural and social science aspects of groundwater research. Next, we analysed the disciplinary composition of their authors' teams, cited references, titles and keywords, making use of our detailed personal expertise in groundwater research and its interdisciplinary aspects. We combined several indicators developed from this analysis into a final classification of the degree of multidisciplinarity of each article. Covering the period between 1990 and 2014, we found that the overall percentage of multidisciplinary articles was in the low single-digit range, with only slight increases over the past decades. The interdisciplinarity of individuals plays a major role compared to interdisciplinarity involving two or more researchers. If collaboration with natural sciences takes place, social science is represented most often by economists. As a side result, we found that journals publishing multidisciplinary research had lower impact factors on average, and multidisciplinary papers were cited much less than mono-disciplinary ones.

Developing an Instrument to Characterise Peer-Led Groups in Collaborative Learning Environments: Assessing Problem-Solving Approach and Group Interaction

ERIC Educational Resources Information Center

Pazos, Pilar; Micari, Marina; Light, Gregory

2010-01-01

Collaborative learning is being used extensively by educators at all levels. Peer-led team learning in a version of collaborative learning that has shown consistent success in science, technology, engineering and mathematics disciplines. Using a multi-phase research study we describe the development of an observation instrument that can be used to…

University Students' Conceptions and Practice of Collaborative Work on Writing

ERIC Educational Resources Information Center

Mutwarasibo, Faustin

2013-01-01

Collaborative work is widely regarded as a valuable tool in the development of student-centred learning. Its importance can be viewed in two ways: First of all, when students are regularly exposed to collaborative work (i.e. pair work or group work) they are likely to develop or improve a range of communication and interpersonal skills. It is also…

Effects of Learning Style Profile of Team on Quality of Materials Developed in Collaborative Learning Processes

ERIC Educational Resources Information Center

Erdem, Mukaddes

2009-01-01

The study described looks at the effects of learning style profile of teams on the quality of materials developed in a collaborative learning process. The study was carried out on collaborative teams of four or five university students, formed through learner preferences. Learning styles of the teams were determined using Kolb's Learning Styles…

Collaborative Learning Processes in the Context of a Public Health Professional Development Program: A Case Study

ERIC Educational Resources Information Center

Tremblay, Marie-Claude; Richard, Lucie; Brousselle, Astrid; Chiocchio, François; Beaudet, Nicole

2017-01-01

The health promotion laboratory (HPL-Canada) is a public health professional development program building on a collaborative learning approach in order to support long-term practice change in local health services teams. This study aims to analyse the collaborative learning processes of two teams involved in the program during the first year of…

The Development of Chinese Education in Malaysia, 1952-1975: Political Collaboration between the Malaysian Chinese Association and the Chinese Educationists

ERIC Educational Resources Information Center

Tan, Yao Sua; Teoh, Hooi See

2015-01-01

This paper examines the development of Chinese education in Malaysia from 1952 to 1975, focusing on the political collaboration between the Malaysian Chinese Association (MCA) and the Chinese educationists to advance the cause of Chinese education instead of the usual macro policy analysis. This collaboration was compounded by the different stand…

Collaboration in young children.

PubMed

Tomasello, Michael; Hamann, Katharina

2012-01-01

Humans accomplish much of what they do in collaboration with others. In ontogeny, children's earliest abilities to collaborate develop in two basic steps. First, 1- and 2-year-olds learn to form with others joint goals and joint attention--which include an understanding of the individual roles and perspectives involved. Second, as they approach their third birthdays, children's collaborative interactions with others take on a more normative dimension involving obligations to the partner. In addition, their cognitive abilities to conceptualize simultaneously both their own role and perspective along with those of the other develop considerably as well. This form of collaborative interaction is underlain by species-unique skills and motivations for shared intentionality that make possible, ultimately, such things as complex cultural institutions.

Collaborative teaching models for health professionals.

PubMed

Falk-Kessler, Janet; Macrae, Nancy; Dyer, Jean

2005-01-01

Multidisciplinary faculty collaboration within the health professions educational system is explored. The definitions for the concepts of intradisciplinary, multidisciplinary, interdisciplinary and transdisciplinary faculty teams are provided along with the strengths and weaknesses of collaborative teaching and course development across various health profession programs. Examples of these teaching models are described using case studies to illustrate collaborative course development by faculty from Occupational Therapy, Nursing, Physician Assistant, Social Work and Dental Hygiene, Nurse Anesthesia, and Health Services Management programs offered at the University of New England in Portland, Maine, United States of America.

Developing and sustaining human resources in the health supply chain in Ethiopia: barriers and enablers.

PubMed

Kälvemark Sporrong, Sofia; Traulsen, Janine M; Damene Kabtimer, Woynabeba; Mekasha Habtegiorgis, Bitsatab; Teshome Gebregeorgise, Dawit; Essah, Nana Am; Khan, Sara A; Brown, Andrew N

2016-01-01

The health supply chain is often the weakest link in achieving the health-related Millennium Development Goals and universal health coverage, requiring trained professionals who are often unavailable. In Ethiopia there have been recent developments in the area of health supply chain management. The aim of this study was to explore the current status of the development of human resources in health supply chain management in Ethiopia and to identify important factors affecting this development. A series of face-to-face interviews with key stakeholders was carried out in 2014. The interviews were conducted using a semi-structured interview guide. The interview guide comprised 51 questions. A qualitative analysis of transcripts was made. A total of 25 interviews were conducted. Three themes were identified: General changes: recognition, commitment and resources, Education and training, and Barriers and enablers. Results confirm the development of human resources in health supply chain management in many areas. However, several problems were identified including lack of coordination, partly due to the large number of stakeholders; reported high staff mobility; and a lack of overall strategy regarding the job/career structures necessary for maintaining human resources. Rural areas have a particular set of problems, including in transportation of goods and personnel, attracting and keeping personnel, and in communication and access to information. Ethiopia is on the way to developing a nationwide viable system for health supply chain management. However, there are still challenges. Short-term challenges include the importance of highlighting strategies and programs for human resources in health supply chain management. In the long term, commitments to financial support must be obtained. A strategy is needed for the further development and sustainability of human resources in the health supply chain in Ethiopia.

Collaborative research: Accomplishments & potential

PubMed Central

Katsouyanni, Klea

2008-01-01

Although a substantial part of scientific research is collaborative and increasing globalization will probably lead to its increase, very few studies actually investigate the advantages, disadvantages, experiences and lessons learned from collaboration. In environmental epidemiology interdisciplinary collaboration is essential and the contrasting geographical patterns in exposure and disease make multi-location projects essential. This paper is based on a presentation given at the Annual Conference of the International Society for Environmental Epidemiology, Paris 2006, and is attempting to initiate a discussion on a framework for studying collaborative research. A review of the relevant literature showed that indeed collaborative research is rising, in some countries with impressive rates. However, there are substantial differences between countries in their outlook, need and respect for collaboration. In many situations collaborative publications receive more citations than those based on national authorship. The European Union is the most important host of collaborative research, mainly driven by the European Commission through the Framework Programmes. A critical assessment of the tools and trends of collaborative networks under FP6, showed that there was a need for a critical revision, which led to changes in FP7. In conclusion, it is useful to study the characteristics of collaborative research and set targets for the future. The added value for science and for the researchers involved may be assessed. The motivation for collaboration could be increased in the more developed countries. Particular ways to increase the efficiency and interaction in interdisciplinary and intercultural collaboration may be developed. We can work towards "the principles of collaborative research" in Environmental Epidemiology. PMID:18208596

The Design of Collaborative Learning for Teaching Physics in Vocational Secondary School

NASA Astrophysics Data System (ADS)

Ismayati, Euis

2018-04-01

Vocational secondary school (Sekolah Menengah Kejuruan or SMK) is a vocational education that is based on the principle of human resource investment (human capital investment) referring to the quality of education and productivity to compete in the global job market. Therefore, vocational education relates directly to business world/industry which fulfills the needs of the skilled worker. According to the results of some researches, the work ethics of vocational graduates are still unsatisfying. Most of them are less able to perform their works, to adapt to the changes and development of technology and science, to be retrained, to develop themselves, to collaborate, and to argue. Meanwhile, the employers in the world of work and industries require their employees to have abilities to think creatively and working collaboratively. In addition, the students’ abilities to adapt to the technology in working environment are greatly influenced by the learning process in their schools, especially in science learning. The process of science learning which can help the students to think and act scientifically should be implemented by teachers using a learning approach which is appropriate to the students’ need and the material taught to the students. To master technology and industry needs science mastery. Physics, as a part of science, has an important role in the development of technology since the products of technology strongly support further development of science. In order to develop the abilities to think critically and working collaboratively, education should be given to the students through the learning process using learning model which refers to a collaborative group discussion system called Collaborative Learning. Moreover, Collaborative learning for teaching Physics in vocational secondary school should be designed in such a way that the goal of teaching and learning can be achieved. Collaborative Learning is advantageous to improve the students’ creative thinking and collaborative working.

Development of the breastfeeding quality improvement in hospitals learning collaborative in New York state.

PubMed

Fitzpatrick, Eileen; Dennison, Barbara A; Welge, Sara Bonam; Hisgen, Stephanie; Boyce, Patricia Simino; Waniewski, Patricia A

2013-06-01

Exclusive breastfeeding is a public health priority. A strong body of evidence links maternity care practices, based on the Ten Steps to Successful Breastfeeding, to increased breastfeeding initiation, duration and exclusivity. Despite having written breastfeeding policies, New York (NY) hospitals vary widely in reported maternity care practices and in prevalence rates of breastfeeding, especially exclusive breastfeeding, during the birth hospitalization. To improve hospital maternity care practices, breastfeeding support, and the percentage of infants exclusively breastfeeding, the NY State Department of Health developed the Breastfeeding Quality Improvement in Hospitals (BQIH) Learning Collaborative. The BQIH Learning Collaborative was the first to use the Institute for Health Care Improvement's Breakthrough Series methodology to specifically focus on increasing hospital breastfeeding support. The evidence-based maternity care practices from the Ten Steps to Successful Breastfeeding provided the basis for the Change Package and Data Measurement Plan. The present article describes the development of the BQIH Learning Collaborative. The engagement of breastfeeding experts, partners, and stakeholders in refining the Learning Collaborative design and content, in defining the strategies and interventions (Change Package) that drive hospital systems change, and in developing the Data Measurement Plan to assess progress in meeting the Learning Collaborative goals and hospital aims is illustrated. The BQIH Learning Collaborative is a model program that was implemented in a group of NY hospitals with plans to spread to additional hospitals in NY and across the country.

Creating Networks through Interinstitutional Faculty Collaboration.

ERIC Educational Resources Information Center

Marino, Sarah R.

2002-01-01

Describes efforts by the consortium Associated Colleges of the Midwest to support interinstitutional faculty collaboration and development. Focuses on three programs: the Global Partners Project, an information literacy grant, and an academic collaboration grant. (EV)

Professionals learning together with patients: An exploratory study of a collaborative learning Fellowship programme for healthcare improvement.

PubMed

Myron, Rowan; French, Catherine; Sullivan, Paul; Sathyamoorthy, Ganesh; Barlow, James; Pomeroy, Linda

2018-05-01

Improving the quality of healthcare involves collaboration between many different stakeholders. Collaborative learning theory suggests that teaching different professional groups alongside each other may enable them to develop skills in how to collaborate effectively, but there is little literature on how this works in practice. Further, though it is recognised that patients play a fundamental role in quality improvement, there are few examples of where they learn together with professionals. To contribute to addressing this gap, we review a collaborative fellowship in Northwest London, designed to build capacity to improve healthcare, which enabled patients and professionals to learn together. Using the lens of collaborative learning, we conducted an exploratory study of six cohorts of the year long programme (71 participants). Data were collected using open text responses from an online survey (n = 31) and semi-structured interviews (n = 34) and analysed using an inductive open coding approach. The collaborative design of the Fellowship, which included bringing multiple perspectives to discussions of real world problems, was valued by participants who reflected on the safe, egalitarian space created by the programme. Participants (healthcare professionals and patients) found this way of learning initially challenging yet ultimately productive. Despite the pedagogical and practical challenges of developing a collaborative programme, this study indicates that opening up previously restricted learning opportunities as widely as possible, to include patients and carers, is an effective mechanism to develop collaborative skills for quality improvement.

Information-Pooling Bias in Collaborative Security Incident Correlation Analysis.

PubMed

Rajivan, Prashanth; Cooke, Nancy J

2018-03-01

Incident correlation is a vital step in the cybersecurity threat detection process. This article presents research on the effect of group-level information-pooling bias on collaborative incident correlation analysis in a synthetic task environment. Past research has shown that uneven information distribution biases people to share information that is known to most team members and prevents them from sharing any unique information available with them. The effect of such biases on security team collaborations are largely unknown. Thirty 3-person teams performed two threat detection missions involving information sharing and correlating security incidents. Incidents were predistributed to each person in the team based on the hidden profile paradigm. Participant teams, randomly assigned to three experimental groups, used different collaboration aids during Mission 2. Communication analysis revealed that participant teams were 3 times more likely to discuss security incidents commonly known to the majority. Unaided team collaboration was inefficient in finding associations between security incidents uniquely available to each member of the team. Visualizations that augment perceptual processing and recognition memory were found to mitigate the bias. The data suggest that (a) security analyst teams, when conducting collaborative correlation analysis, could be inefficient in pooling unique information from their peers; (b) employing off-the-shelf collaboration tools in cybersecurity defense environments is inadequate; and (c) collaborative security visualization tools developed considering the human cognitive limitations of security analysts is necessary. Potential applications of this research include development of team training procedures and collaboration tool development for security analysts.

Challenges for Product Roadmapping in Inter-company Collaboration

NASA Astrophysics Data System (ADS)

Suomalainen, Tanja; Tihinen, Maarit; Parviainen, Päivi

Product roadmapping is a critical activity in product development, as it provides a link between business aspects and requirements engineering and thus helps to manage a high-level view of the company’s products. Nowadays, inter-company collaboration, such as outsourcing, is a common way of developing software products, as through collaboration, organisations gain advantages, such as flexibility with in-house resources, savings in product development costs and gain a physical presence in important markets. The role of product roadmapping becomes even more critical in collaborative settings, since different companies need to align strategies and work together to create products. In order to support companies in improving their own product roadmapping processes, this paper first gives an overview of product roadmapping and then discusses in detail an empirical study of the current practices in industry. The presented results particularly focus on the most challenging and important activities of product roadmapping in collaboration.

Applying Adaptive Swarm Intelligence Technology with Structuration in Web-Based Collaborative Learning

ERIC Educational Resources Information Center

Huang, Yueh-Min; Liu, Chien-Hung

2009-01-01

One of the key challenges in the promotion of web-based learning is the development of effective collaborative learning environments. We posit that the structuration process strongly influences the effectiveness of technology used in web-based collaborative learning activities. In this paper, we propose an ant swarm collaborative learning (ASCL)…

Support for Mobile Collaborative Learning Applications

ERIC Educational Resources Information Center

Martin, Sergio; Boticki, Ivica; Jacobs, George; Castro, Manuel; Peire, Juan

2010-01-01

This work is intended to describe a framework aimed to address the challenges in the development of mobile Collaborative Learning applications. Firstly, the paper offers an overview of some of the main principles of Collaborative Learning that will be the basis of the framework, which is based on three main pillars: collaboration and communication…

Using a Game Environment to Foster Collaborative Learning: A Design-Based Study

ERIC Educational Resources Information Center

Hamalainen, Raija

2011-01-01

Designing collaborative three-dimensional learning games for vocational learning may be one way to respond to the needs of working life. The theoretical vantage points of collaborative learning for game development and the "design-based research" methodology are described; these have been used to support collaborative learning in the…

Comparing Learning Performance of Students Using Algorithm Visualizations Collaboratively on Different Engagement Levels

ERIC Educational Resources Information Center

Laakso, Mikko-Jussi; Myller, Niko; Korhonen, Ari

2009-01-01

In this paper, two emerging learning and teaching methods have been studied: collaboration in concert with algorithm visualization. When visualizations have been employed in collaborative learning, collaboration introduces new challenges for the visualization tools. In addition, new theories are needed to guide the development and research of the…

Arguments for a Common Set of Principles for Collaborative Inquiry in Evaluation

ERIC Educational Resources Information Center

Cousins, J. Bradley; Whitmore, Elizabeth; Shulha, Lyn

2013-01-01

In this article, we critique two recent theoretical developments about collaborative inquiry in evaluation--using logic models as a means to understand theory, and efforts to compartmentalize versions of collaborative inquiry into discrete genres--as a basis for considering future direction for the field. We argue that collaborative inquiry in…

Collaboration on Procedural Problems May Support Conceptual Knowledge More than You May Think

ERIC Educational Resources Information Center

Olsen, Jennifer K.; Belenky, Daniel M.; Aleven, Vincent; Rummel, Nikol

2014-01-01

While collaborative Intelligent Tutoring Systems (ITSs) have been designed for older students and have been shown to support sense-making behaviors, there has not been as much work on creating systems to support collaboration between elementary school students. We have developed and tested, with 84 students, individual and collaborative versions…

Comprehensive Assessment of Composition and Thermochemical Variability by High Resolution GC/QToF-MS and the Advanced Distillation-Curve Method as a Basis of Comparison for Reference Fuel Development.

PubMed

Lovestead, Tara M; Burger, Jessica L; Schneider, Nico; Bruno, Thomas J

2016-12-15

Commercial and military aviation is faced with challenges that include high fuel costs, undesirable emissions, and supply chain insecurity that result from the reliance on petroleum-based feedstocks. The development of alternative gas turbine fuels from renewable resources will likely be part of addressing these issues. The United States has established a target for one billion gallons of renewable fuels to enter the supply chain by 2018. These alternative fuels will have to be very similar in properties, chemistry, and composition to existing fuels. To further this goal, the National Jet Fuel Combustion Program (a collaboration of multiple U.S. agencies under the auspices of the Federal Aviation Administration, FAA) is coordinating measurements on three reference gas turbine fuels to be used as a basis of comparison. These fuels are reference fuels with certain properties that are at the limits of experience. These fuels include a low viscosity, low flash point, high hydrogen content "best case" JP-8 (POSF 10264) fuel, a relatively high viscosity, high flash point, low hydrogen content "worst case" JP-5 (POSF 10259) fuel, and a Jet-A (POSF 10325) fuel with relatively average properties. A comprehensive speciation of these fuels is provided in this paper by use of high resolution gas chromatography/quadrupole time-of-flight - mass spectrometry (GC/QToF-MS), which affords unprecedented resolution and exact molecular formula capabilities. The volatility information as derived from the measurement of the advanced distillation curve temperatures, T k and T h , provides an approximation of the vapor liquid equilibrium and examination of the composition channels provides detailed insight into thermochemical data. A comprehensive understanding of the compositional and thermophysical data of gas turbine fuels is required not only for comparison but also for modeling of such complex mixtures, which will, in turn, aid in the development of new fuels with the goals of diversified feedstocks, decreased pollution, and increased efficiency.

Supplier Development: A Long-Term Supportability Option For USAF Engines

DTIC Science & Technology

2012-02-01

Supply Chain Management Practices..................8 AF and DoD Regulations "Limitation or Hoax" Can USAF Develop Suppliers...integrated supply chain management (SCM) process providing engines and parts, aiding in the ability of the depots to meet the warfighter‟s needs. The... supply chain has struggled in the past to support the warfighter with enough engines to accomplish the mission. The engine supply chain management

Skill Transfer and Virtual Training for IND Response Decision-Making: Models for Government-Industry Collaboration for the Development of Game-Based Training Tools

DTIC Science & Technology

2016-04-01

IND Response Decision-Making: Models for Government–Industry Collaboration for the Development of Game -Based Training Tools R.M. Seater C.E. Rose...Models for Government–Industry Collaboration for the Development of Game -Based Training Tools C.E. Rose A.S. Norige Group 44 R.M. Seater K.C...Report 1208 Lexington Massachusetts This page intentionally left blank. iii EXECUTIVE SUMMARY Game -based training tools, sometimes called “serious

Securely Partitioning Spacecraft Computing Resources: Validation of a Separation Kernel

NASA Astrophysics Data System (ADS)

Bremer, Leon; Schreutelkamp, Erwin

2011-08-01

The F-35 Lightning II, also known as the Joint Strike Fighter, will be the first operational fighter aircraft equipped with an operational MultiShip Embedded Training capability. This onboard training system allows teams of fighter pilots to jointly operate their F-35 in flight against virtual threats, avoiding the need for real adversary air threats and surface threat systems in their training. The European Real-time Operations Simulator (EuroSim) framework is well known in the space domain, particularly in support of engineering and test phases of space system development. In the MultiShip Embedded Training project, EuroSim is not only the essential tool for development and verification throughout the project but is also the engine of the final embedded simulator on board of the F-35 aircraft. The novel ways in which EuroSim is applied in the project in relation to distributed simulation problems, team collaboration, tool chains and embedded systems can benefit many projects and applications. The paper describes the application of EuroSim as the simulation engine of the F-35 Embedded Training solution, the extensions to the EuroSim product that enable this application, and its usage in development and verification of the whole project as carried out at the sites of Dutch Space and the National Aerospace Laboratory (NLR).

Collaboration between industry and academia--prospects for male fertility control.

PubMed

Stock, G; Habenicht, U F

1999-12-01

Drug development within the pharmaceutical industry is probably the field with the highest level of regulations. Due to the complexity of the different components of drug development and drug surveillance the need for a sophisticated organization and infrastructure is obvious. In addition, there is a necessity for sufficient resources and long-term commitment as well as logistic and long-term knowledge management. In order to secure high professional standards at all levels of this highly complex value creating chain, the number of cooperative arrangements in the pharmaceutical industry are increasing. The identification of new targets in the drug finding process calls in particular for outside partners. At the same time the preparedness of non-industrial researchers to cooperate with industry has also increased significantly. The area of fertility control, especially male fertility control, provides an excellent example for this kind of cooperation between industrial and non-industrial partners. Here a cooperative network is described which probably meets practically all relevant criteria for both the non-industrial but also the industrial partner. Some principles for the management of such a cooperative network are discussed. We believe that this kind of network can serve as a model for similar networks in other fields.

Optical testbed for the LISA phasemeter

NASA Astrophysics Data System (ADS)

Schwarze, T. S.; Fernández Barranco, G.; Penkert, D.; Gerberding, O.; Heinzel, G.; Danzmann, K.

2016-05-01

The planned spaceborne gravitational wave detector LISA will allow the detection of gravitational waves at frequencies between 0.1 mHz and 1 Hz. A breadboard model for the metrology system aka the phasemeter was developed in the scope of an ESA technology development project by a collaboration between the Albert Einstein Institute, the Technical University of Denmark and the Danish industry partner Axcon Aps. It in particular provides the electronic readout of the main interferometer phases besides auxiliary functions. These include clock noise transfer, ADC pilot tone correction, inter-satellite ranging and data transfer. Besides in LISA, the phasemeter can also be applied in future satellite geodesy missions. Here we show the planning and advances in the implementation of an optical testbed for the full metrology chain. It is based on an ultra-stable hexagonal optical bench. This bench allows the generation of three unequal heterodyne beatnotes with a zero phase combination, thus providing the possibility to probe the phase readout for non-linearities in an optical three signal test. Additionally, the utilization of three independent phasemeters will allow the testing of the auxiliary functions. Once working, components can individually be replaced with flight-qualified hardware in this setup.

Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

NASA Astrophysics Data System (ADS)

Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

Lessons Learned from the Process of Curriculum Developers' and Assessment Developers' Collaboration on the Development of Embedded Formative Assessments

ERIC Educational Resources Information Center

Brandon, Paul R.; Young, Donald B.; Shavelson, Richard J.; Jones, Rachael; Ayala, Carlos C.; Ruiz-Primo, Maria Araceli; Yin, Yue; Tomita, Miki K.; Furtak, Erin Marie

2008-01-01

Our project to embed formative student assessments in the Foundational Approaches in Science Teaching curriculum required a close collaboration between curriculum developers at the Curriculum Research & Development Group (CRDG) and assessment developers at the Stanford Educational Assessment Laboratory (SEAL). This was a new endeavor for each…

Inter-professional education of prospective speech-language therapists and primary school teachers through shared professional practice placements.

PubMed

Wilson, Leanne; McNeill, Brigid; Gillon, Gail T

2017-07-01

Preliminary studies of inter-professional education (IPE) among student speech-language therapists (SLTs) and student teachers suggest that workshop-based applications are beneficial in preparing participants for elements of collaborative practice. Situating IPE within the students' professional practice placements may provide another useful avenue to develop attitudes, knowledge and skills for inter-professional collaboration. Research examining the impact of different approaches to IPE is required to advance our understanding of effective design and evaluation of such initiatives. To understand how student SLTs and student teachers develop competency for collaborative practice when co-working during professional practice placements to support children's speech and literacy development. A case study design was used to monitor the impact of the IPE. Student SLTs (n = 4) were paired with student teachers (n = 4) to participate in shared professional practice placements in junior school classrooms. An inductive thematic analysis of interviews conducted with participants after the IPE was employed to explore the development of competencies in collaborative practice. Change in inter-disciplinary knowledge and perceptions over the IPE was evaluated via survey to further explore the development of collaborative competencies. Integration of qualitative and quantitative findings suggested that participants began to develop four broad areas of collaborative competency: understanding of professional roles and expertise, communication skills to support shared decision-making, inter-dependency in supporting children's learning, and flexibility to implement alternative instructional practices. Interview analysis also revealed factors related to the facilitators and learning contexts that supported and/or limited the collaboration between participants. Shared placement experiences between student SLTs and student teachers may be an effective method for building participants' competencies in multiple aspects of collaborative practice. Active facilitation by both SLT and classroom teacher supervisors alongside careful consideration of learning contexts (e.g., classroom structure) will help to ensure that learning is maximized for prospective professionals. © 2016 Royal College of Speech and Language Therapists.

The Role of Collaborative Learning on Training and Development Practices within the Australian Men's Shed Movement: A Study of Five Men's Sheds

ERIC Educational Resources Information Center

Cavanagh, Jillian; Southcombe, Amie; Bartram, Tim

2014-01-01

This study examines the role and impact of collaborative learning on training and development practices in Australian Men's Sheds. We use a case study approach, underpinned by Peters and Armstrong's theoretical framework of collaborative learning in adult education, to investigate five Men's Sheds. Semi-structured interviews were carried out with…

Narratives of the Leadership Development of Adults Who Served as Summer Camp Staff in the Mennonite Setting: A Multiple Case Study

ERIC Educational Resources Information Center

Harrison, Jason

2013-01-01

Problem: Leaders today need a new set of knowledge and skills to be effective in collaborative environments. The focus of this study was to investigate how collaborative environments can contribute to leadership development. The purpose of this study was to describe how the collaborative environment of summer camp helped shape emerging adults as…

Educators' Interprofessional Collaborative Relationships: Helping Pharmacy Students Learn to Work with Other Professions.

PubMed

Croker, Anne; Smith, Tony; Fisher, Karin; Littlejohns, Sonja

2016-03-30

Similar to other professions, pharmacy educators use workplace learning opportunities to prepare students for collaborative practice. Thus, collaborative relationships between educators of different professions are important for planning, implementing and evaluating interprofessional learning strategies and role modelling interprofessional collaboration within and across university and workplace settings. However, there is a paucity of research exploring educators' interprofessional relationships. Using collaborative dialogical inquiry we explored the nature of educators' interprofessional relationships in a co-located setting. Data from interprofessional focus groups and semi-structured interviews were interpreted to identify themes that transcended the participants' professional affiliations. Educators' interprofessional collaborative relationships involved the development and interweaving of five interpersonal behaviours: being inclusive of other professions; developing interpersonal connections with colleagues from other professions; bringing a sense of own profession in relation to other professions; giving and receiving respect to other professions; and being learner-centred for students' collaborative practice . Pharmacy educators, like other educators, need to ensure that interprofessional relationships are founded on positive experiences rather than vested in professional interests.

Let's Scrum! Learning Digital Media Collaboratively

ERIC Educational Resources Information Center

Wilson, Daniel G.; Brown, Joshua; Burke, Adam A.

2013-01-01

The changing landscape of digital media and software development has immense impact on society, not only through consumer use of the products, but also in the way these technologies are developed. Modern software and media-development companies are using collaborative methods to develop innovative and useful products. Technology and engineering…

Leading Game-Simulation Development Teams: Enabling Collaboration with Faculty Experts

ERIC Educational Resources Information Center

Aleckson, Jon D.

2010-01-01

This study explored how educational technology development leaders can facilitate increased collaboration between the instructional design and development team and faculty member experts when developing games and simulations. A qualitative, case study method was used to analyze interviews and documents, and Web postings related specifically to…

Supporting open collaboration in science through explicit and linked semantic description of processes

USGS Publications Warehouse

Gil, Yolanda; Michel, Felix; Ratnakar, Varun; Read, Jordan S.; Hauder, Matheus; Duffy, Christopher; Hanson, Paul C.; Dugan, Hilary

2015-01-01

The Web was originally developed to support collaboration in science. Although scientists benefit from many forms of collaboration on the Web (e.g., blogs, wikis, forums, code sharing, etc.), most collaborative projects are coordinated over email, phone calls, and in-person meetings. Our goal is to develop a collaborative infrastructure for scientists to work on complex science questions that require multi-disciplinary contributions to gather and analyze data, that cannot occur without significant coordination to synthesize findings, and that grow organically to accommodate new contributors as needed as the work evolves over time. Our approach is to develop an organic data science framework based on a task-centered organization of the collaboration, includes principles from social sciences for successful on-line communities, and exposes an open science process. Our approach is implemented as an extension of a semantic wiki platform, and captures formal representations of task decomposition structures, relations between tasks and users, and other properties of tasks, data, and other relevant science objects. All these entities are captured through the semantic wiki user interface, represented as semantic web objects, and exported as linked data.

The creation of innovation through public-private collaboration.

PubMed

Esteve, Marc; Ysa, Tamyko; Longo, Francisco

2012-09-01

This article develops the notion of how different options of public-private collaborations implemented by organizations affect the creation of innovation through a case study: the Blood and Tissue Bank. Data were obtained through in-depth semi-structured interviews with the entire managerial team of the organization under analysis. We coded the interviews, and implemented content analysis. These data were triangulated with the analysis of the organization's internal documents. This article contributes to the understanding of innovation management in public-private collaborations in health professions by identifying the existence of different options in an organization to develop collaborative innovation among the public and the private sectors: contracts, contractual public-private partnership, and institutionalised public-private partnership. We observed that the creation of innovation is directly related to the institutional arrangement chosen to develop each project. Thus, certain innovations are unfeasible without a high degree of maturity in the interorganizational collaboration. However, it is also noteworthy that as the intensity of the collaboration increases, so do costs, and control over the process decreases. Copyright © 2012 Sociedad Española de Cardiología. Published by Elsevier Espana. All rights reserved.

Carving a niche: establishing bioinformatics collaborations

PubMed Central

Lyon, Jennifer A.; Tennant, Michele R.; Messner, Kevin R.; Osterbur, David L.

2006-01-01

Objectives: The paper describes collaborations and partnerships developed between library bioinformatics programs and other bioinformatics-related units at four academic institutions. Methods: A call for information on bioinformatics partnerships was made via email to librarians who have participated in the National Center for Biotechnology Information's Advanced Workshop for Bioinformatics Information Specialists. Librarians from Harvard University, the University of Florida, the University of Minnesota, and Vanderbilt University responded and expressed willingness to contribute information on their institutions, programs, services, and collaborating partners. Similarities and differences in programs and collaborations were identified. Results: The four librarians have developed partnerships with other units on their campuses that can be categorized into the following areas: knowledge management, instruction, and electronic resource support. All primarily support freely accessible electronic resources, while other campus units deal with fee-based ones. These demarcations are apparent in resource provision as well as in subsequent support and instruction. Conclusions and Recommendations: Through environmental scanning and networking with colleagues, librarians who provide bioinformatics support can develop fruitful collaborations. Visibility is key to building collaborations, as is broad-based thinking in terms of potential partners. PMID:16888668

Project UNITY: Cross Domain Visualization Collaboration

NASA Astrophysics Data System (ADS)

Moore, J.; Havig, P.

UNITY is an International Cooperative Research and Development (ICR&D) project between the United States and Great Britain under the Research and Development Projects (RDP) Memorandum of Agreement (MOA). UNITYs objectives are to develop and evaluate the operational concepts and requirements for undertaking combined operations: a) pursuant to the interests of mission partners, b) develop, experiment, and demonstrate, transitionable emergent technologies, capabilities, or concepts, which facilitate the sharing of information and products between mission partners, and c) identify and define additional emerging technologies that may need to be developed to support current and future military information sharing. Collaboration between coalition partners is essentially for accurate and timely decision making in the ever increasing nature and tempo of global security. The purpose for this project is to develop engineering solutions in order to further investigate the human factors issues that arise while sharing information in a collaborative environment where security is an issue. The biggest difference between existing available solutions are in the presentation and interaction with the interface on both ends of the collaboration in order to preserve the expressed intent of shared situation awareness while also enabling markups and content on one screen that the other collaborator does not see and vice versa. The UNITY project stresses collaboration differently than all known realtime collaboration software in production, aka groupware, on the market today. The tradition of What You See Is What I See (WYSIWIS) as in typical implementations of shared whiteboards simply do not address the need for local and private information to be displayed in context with shareable data. This paper addresses the concerns, problems, and some solutions for shared 3D visualization and 2D tabular visualizations which are explored and presented within the space situation awareness problem set.

Supply chain optimization at an academic medical center.

PubMed

Labuhn, Jonathan; Almeter, Philip; McLaughlin, Christopher; Fields, Philip; Turner, Benjamin

2017-08-01

A successful supply chain optimization project that leveraged technology, engineering principles, and a technician workflow redesign in the setting of a growing health system is described. With continued rises in medication costs, medication inventory management is increasingly important. Proper management of central pharmacy inventory and floor-stock inventory in automated dispensing cabinets (ADCs) can be challenging. In an effort to improve control of inventory costs in the central pharmacy of a large academic medical center, the pharmacy department implemented a supply chain optimization project in collaboration with the medical center's inhouse team of experts on process improvement and industrial engineering. The project had 2 main components: (1) upgrading and reconfiguring carousel technology within an expanded central pharmacy footprint to generate accurate floor-stock inventory replenishment reports, which resulted in efficiencies within the medication-use system, and (2) implementing a technician workflow redesign and algorithm to right-size the ADC inventory, which decreased inventory stockouts (i.e., incidents of depletion of medication stock) and improved ADC user satisfaction. Through a multifaceted approach to inventory management, the number of stockouts per month was decreased and ADC inventory was optimized, resulting in a one-time inventory cost savings of $220,500. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Valley Cultivates Comprehensive Process

ERIC Educational Resources Information Center

Pardini, Priscilla

2004-01-01

Staff development at Starlight Professional Development School (Watsonville, California) aims to stimulate every teacher's personal and professional growth. Collaboration is the signature piece of a very comprehensive program. In fact, collaboration among teachers and other professionals at Starlight is the vehicle that drives staff development.…

Analysis of diverse regulatory networks in a hierarchical context shows consistent tendencies for collaboration in the middle levels

PubMed Central

Bhardwaj, Nitin; Yan, Koon-Kiu; Gerstein, Mark B.

2010-01-01

Gene regulatory networks have been shown to share some common aspects with commonplace social governance structures. Thus, we can get some intuition into their organization by arranging them into well-known hierarchical layouts. These hierarchies, in turn, can be placed between the extremes of autocracies, with well-defined levels and clear chains of command, and democracies, without such defined levels and with more co-regulatory partnerships between regulators. In general, the presence of partnerships decreases the variation in information flow amongst nodes within a level, more evenly distributing stress. Here we study various regulatory networks (transcriptional, modification, and phosphorylation) for five diverse species, Escherichia coli to human. We specify three levels of regulators—top, middle, and bottom—which collectively govern the non-regulator targets lying in the lowest fourth level. We define quantities for nodes, levels, and entire networks that measure their degree of collaboration and autocratic vs. democratic character. We show individual regulators have a range of partnership tendencies: Some regulate their targets in combination with other regulators in local instantiations of democratic structure, whereas others regulate mostly in isolation, in more autocratic fashion. Overall, we show that in all networks studied the middle level has the highest collaborative propensity and coregulatory partnerships occur most frequently amongst midlevel regulators, an observation that has parallels in corporate settings where middle managers must interact most to ensure organizational effectiveness. There is, however, one notable difference between networks in different species: The amount of collaborative regulation and democratic character increases markedly with overall genomic complexity. PMID:20351254

Supporting Collaboration and Creativity Through Mobile P2P Computing

NASA Astrophysics Data System (ADS)

Wierzbicki, Adam; Datta, Anwitaman; Żaczek, Łukasz; Rzadca, Krzysztof

Among many potential applications of mobile P2P systems, collaboration applications are among the most prominent. Examples of applications such as Groove (although not intended for mobile networks), collaboration tools for disaster recovery (the WORKPAD project), and Skype's collaboration extensions, all demonstrate the potential of P2P collaborative applications. Yet, the development of such applications for mobile P2P systems is still difficult because of the lack of middleware.

A fuzzy MICMAC analysis for improving supply chain performance of basic vaccines in developing countries.

PubMed

Chandra, Dheeraj; Kumar, Dinesh

2018-03-01

In recent years, demand to improve child immunization coverage globally, and the development of the latest vaccines and technology has made the vaccine market very complex. The rise in such complexities often gives birth to numerous issues in the vaccine supply chain, which are the primary cause of its poor performance. Figuring out the cause of the performance problem can help you decide how to address it. The goal of the present study is to identify and analyze important issues in the supply chain of basic vaccines required for child immunization in the developing countries. Twenty-five key issues as various factors of the vaccine supply chain have been presented in this paper. Fuzzy MICMAC analysis has been carried out to classify the factors based on their driving and dependence power and to develop a hierarchy based model. Further, the findings have been discussed with the field experts to identify the critical factors. Three factors: better demand forecast, communication between the supply chain members, and proper planning and scheduling have been identified as the critical factors of vaccine supply chain. These factors should be given special care to improve vaccine supply chain performance.

Moving out of one's comfort zone: developing and teaching an interprofessional research course.

PubMed

Berman, Rosemarie O

2013-07-01

Teamwork and interprofessional collaboration have long been identified as core competencies for achieving quality, safe, patient-centered care. The shared learning environment of an interprofessional course is one method for developing the foundation for a collaborative practice-ready work force. Developing and teaching a course for students in a variety of health professions can be challenging as faculty move beyond the comfort level of their discipline. This article describes the development of an interprofessional research course to meet the needs of different health disciplines with specific teaching strategies to develop core competencies for interprofessional collaboration and practice. Copyright 2013, SLACK Incorporated.

Developing sustainable food supply chains.

PubMed

Smith, B Gail

2008-02-27

This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

A conceptual framework for assessing interorganizational integration and interprofessional collaboration.

PubMed

Willumsen, Elisabeth; Ahgren, Bengt; Ødegård, Atle

2012-05-01

The need for collaboration in health and social welfare is well documented internationally. It is related to the improvement of services for the users, particularly target groups with multiple problems. However, there is still insufficient knowledge of the complex area of collaboration, and the interprofessional literature highlights the need to develop adequate research approaches for exploring collaboration between organizations, professionals and service users. This paper proposes a conceptual framework based on interorganizational and interprofessional research, with focus on the concepts of integration and collaboration. Furthermore, the paper suggests how two measurement instruments can be combined and adapted to the welfare context in order to explore collaboration between organizations, professionals and service users, thereby contributing to knowledge development and policy improvement. Issues concerning reliability, validity and design alternatives, as well as the importance of management, clinical implications and service user involvement in future research, are discussed.

Identifying emerging research collaborations and networks: method development.

PubMed

Dozier, Ann M; Martina, Camille A; O'Dell, Nicole L; Fogg, Thomas T; Lurie, Stephen J; Rubinstein, Eric P; Pearson, Thomas A

2014-03-01

Clinical and translational research is a multidisciplinary, collaborative team process. To evaluate this process, we developed a method to document emerging research networks and collaborations in our medical center to describe their productivity and viability over time. Using an e-mail survey, sent to 1,620 clinical and basic science full- and part-time faculty members, respondents identified their research collaborators. Initial analyses, using Pajek software, assessed the feasibility of using social network analysis (SNA) methods with these data. Nearly 400 respondents identified 1,594 collaborators across 28 medical center departments resulting in 309 networks with 5 or more collaborators. This low-burden approach yielded a rich data set useful for evaluation using SNA to: (a) assess networks at several levels of the organization, including intrapersonal (individuals), interpersonal (social), organizational/institutional leadership (tenure and promotion), and physical/environmental (spatial proximity) and (b) link with other data to assess the evolution of these networks.

Establishment of the International Power Institute. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Julius E. Coles

The International Power Institute, in collaboration with American industries, seeks to address technical, political, economic and cultural issues of developing countries in the interest of facilitating profitable transactions in power related infrastructure projects. IPI works with universities, governments and commercial organizations to render project-specific recommendations for private-sector investment considerations. IPI also established the following goals: Facilitate electric power infrastructure transactions between developing countries and the US power industry; Collaborate with developing countries to identify development strategies to achieve energy stability; and Encourage market driven solutions and work collaboratively with other international trade energy, technology and banking organizations.

Experiential Collaborative Learning and Preferential Thinking

NASA Astrophysics Data System (ADS)

Volpentesta, Antonio P.; Ammirato, Salvatore; Sofo, Francesco

The paper presents a Project-Based Learning (shortly, PBL) approach in a collaborative educational environment aimed to develop design ability and creativity of students coming from different engineering disciplines. Three collaborative learning experiences in product design were conducted in order to study their impact on preferred thinking styles of students. Using a thinking style inventory, pre- and post-survey data was collected and successively analyzed through ANOVA techniques. Statistically significant results showed students successfully developed empathy and an openness to multiple perspectives. Furthermore, data analysis confirms that the proposed collaborative learning experience positively contributes to increase awareness in students' thinking styles.

The Study on Collaborative Manufacturing Platform Based on Agent

NASA Astrophysics Data System (ADS)

Zhang, Xiao-yan; Qu, Zheng-geng

To fulfill the trends of knowledge-intensive in collaborative manufacturing development, we have described multi agent architecture supporting knowledge-based platform of collaborative manufacturing development platform. In virtue of wrapper service and communication capacity agents provided, the proposed architecture facilitates organization and collaboration of multi-disciplinary individuals and tools. By effectively supporting the formal representation, capture, retrieval and reuse of manufacturing knowledge, the generalized knowledge repository based on ontology library enable engineers to meaningfully exchange information and pass knowledge across boundaries. Intelligent agent technology increases traditional KBE systems efficiency and interoperability and provides comprehensive design environments for engineers.

The National Public Health Leadership Institute: evaluation of a team-based approach to developing collaborative public health leaders.

PubMed

Umble, Karl; Steffen, David; Porter, Janet; Miller, Delesha; Hummer-McLaughlin, Kelley; Lowman, Amy; Zelt, Susan

2005-04-01

Recent public health literature contains calls for collaborative public health interventions and for leaders capable of guiding them. The National Public Health Leadership Institute aims to develop collaborative leaders and to strengthen networks of leaders who share knowledge and jointly address public health problems. Evaluation results show that completing the institute training increases collaborative leadership and builds knowledge-sharing and problem-solving networks. These practices and networks strengthen interorganizational relationships, coalitions, services, programs, and policies. Intensive team-and project-based learning are key to the program's impact.

The National Public Health Leadership Institute: Evaluation of a Team-Based Approach to Developing Collaborative Public Health Leaders

PubMed Central

Umble, Karl; Steffen, David; Porter, Janet; Miller, Delesha; Hummer-McLaughlin, Kelley; Lowman, Amy; Zelt, Susan

2005-01-01

Recent public health literature contains calls for collaborative public health interventions and for leaders capable of guiding them. The National Public Health Leadership Institute aims to develop collaborative leaders and to strengthen networks of leaders who share knowledge and jointly address public health problems. Evaluation results show that completing the institute training increases collaborative leadership and builds knowledge-sharing and problem-solving networks. These practices and networks strengthen interorganizational relationships, coalitions, services, programs, and policies. Intensive team-and project-based learning are key to the program’s impact. PMID:15798124

Combining Collaborative Learning with Learning Management Systems in Teaching Programming Language

ERIC Educational Resources Information Center

Cavus, Nadire; Uzunboylu, Huseyin; Ibrahim, Dogan

2006-01-01

The development of collaborative studies in learning has led to a renewed interest in the field of web-based education. In this experimental study, a highly interactive and collaborative teaching environment was created using Moodle, a learning management system with two types of Collaborative Tools (CTs): Standard CT and Advanced CT to create a…

The Practice of Collaboration as Ethical Activity in Art/s Education?

ERIC Educational Resources Information Center

Thomas, Kerry

2015-01-01

Popular wisdom has it that collaboration is "the new black" in the arts and arts education. Collaboration is viewed as the basis for the making of new and novel artefacts in contemporary cultures, while also being repeatedly used as a catchword in the development of curriculum. Yet, collaboration as praxis entails complex and…

Understanding Teacher Collaboration Processes from a Complexity Theory Perspective: A Case Study of a Chinese Secondary School

ERIC Educational Resources Information Center

Yuan, Rui; Zhang, Jia; Yu, Shulin

2018-01-01

Although research on teacher collaboration has proliferated in the last few decades, scant attention has been paid to the development of teacher collaboration in school contexts. Informed by the perspective of complexity theory, this study investigates the complex process of teacher collaboration through qualitative interviews in an English…

Student Perceptions and Performance in Online and Offline Collaboration in an Interior Design Studio

ERIC Educational Resources Information Center

Cho, Ji Young; Cho, Moon-Heum

2014-01-01

Competence in collaboration is one of the critical abilities that interior design majors are expected to develop during the course of their education; however, few students are competent to collaborate with others online. The purposes of this study were to identify student perceptions and performance in online collaboration compared to those of…

Taking an Instrumental Genesis Lens: New Insights into Collaborative Mobile Learning

ERIC Educational Resources Information Center

Cerratto Pargman, Teresa; Nouri, Jalal; Milrad, Marcelo

2018-01-01

In this paper, we argue that in order to gain a deeper understanding of collaborative mobile learning in schools, it is important to know not only how mobile devices affect collaborative learning but also how collaborative learning emerges and is mediated by these devices. We develop our argument by applying the instrumental genesis theory and the…

The Integration of a Three-Year-Long Intercultural Collaborative Project into a Foreign Language Classroom for the Development of Intercultural Competence

ERIC Educational Resources Information Center

Hirotani, Maki; Fujii, Kiyomi

2015-01-01

Many studies on intercultural communication introduced how their collaborative projects were conducted. There are also several studies that discuss how intercultural collaborative activities can be integrated into a foreign language curriculum, as well as a big project (the INTENT project) that helps teachers integrate collaborative activities…

Potential and Impact Factors of the Knowledge and Information Awareness Approach for Fostering Net-Based Collaborative Problem-Solving: An Overview

ERIC Educational Resources Information Center

Engelmann, Tanja

2014-01-01

For effective communication and collaboration in learning situations, it is important to know what the collaboration partners know. However, the acquisition of this knowledge is difficult, especially in collaborating groups with spatially distributed members. One solution is the "Knowledge and Information Awareness" approach developed by…

Fiia: A Model-Based Approach to Engineering Collaborative Augmented Reality

NASA Astrophysics Data System (ADS)

Wolfe, Christopher; Smith, J. David; Phillips, W. Greg; Graham, T. C. Nicholas

Augmented reality systems often involve collaboration among groups of people. While there are numerous toolkits that aid the development of such augmented reality groupware systems (e.g., ARToolkit and Groupkit), there remains an enormous gap between the specification of an AR groupware application and its implementation. In this chapter, we present Fiia, a toolkit which simplifies the development of collaborative AR applications. Developers specify the structure of their applications using the Fiia modeling language, which abstracts details of networking and provides high-level support for specifying adapters between the physical and virtual world. The Fiia.Net runtime system then maps this conceptual model to a runtime implementation. We illustrate Fiia via Raptor, an augmented reality application used to help small groups collaboratively prototype video games.

Mother-child play: children with Down syndrome and typical development.

PubMed

Venuti, P; de Falco, S; Esposito, G; Bornstein, Marc H

2009-07-01

Child solitary and collaborative mother-child play with 21 children with Down syndrome and 33 mental-age-matched typically developing children were compared. In solitary play, children with Down syndrome showed less exploratory but similar symbolic play compared to typically developing children. From solitary to collaborative play, children with Down syndrome increased their exploratory play, attaining the same level as typically developing children. Pretense significantly increased from solitary to collaborative play only in typically developing children. Differences between mothers' play in the two groups mirrored those between their children. Both groups showed similar attunement and synchrony. Mothers contribute to the play development of children with Down syndrome through their own adaptation to their children's limitations and potentialities.

Localization of type IV collagen a 1 to a 6 chains in basement membrane during mouse molar germ development.

PubMed

Nagai, N; Nakano, K; Sado, Y; Naito, I; Gunduz, M; Tsujigiwa, H; Nagatsuka, H; Ninomiya, Y; Siar, C H

2001-10-01

The dental basement membrane (BM) putatively mediates epithelial-mesenchymal interactions during tooth morphogenesis and cytodifferentiation. Type IV collagen alpha chains, a major network-forming protein of the dental BM, was studied and results disclosed distinct expression patterns at different stages of mouse molar germ development. At the dental placode and bud stage, the BM of the oral epithelium expressed alpha 1, alpha 2, alpha 5 and alpha 6 chains while the gubernaculum dentis, in addition to the above four chains, also expressed a 4 chain. An asymmetrical expression for alpha 4, alpha 5 and alpha 6 chains was observed at the bud stage. At the early bell stage, the BM associated with the inner enamel epithelium (IEE) of molar germ expressed alpha 1, alpha 2 and alpha 4 chains while the BM of the outer enamel epithelium (OEE) expressed only alpha 1 and a 2 chains. With the onset of dentinogenesis, the collagen a chain profile of the IEE BM gradually disappeared. Howeverfrom the early to late bell stage, the gubernaculum dentis consistently expressed alpha 1, alpha 2, alpha 5 and a 6 chains resembling fetal oral mucosa. These findings suggest that stage- and position-specific distribution of type IV collagen alpha subunits occur during molar germ development and that these changes are essential for molar morphogenesis and cytodifferentiation.

Curriculum Development through YTS Modular Credit Accumulation.

ERIC Educational Resources Information Center

Further Education Unit, London (England).

This document reports the evaluation of the collaborately developed Modular Training Framework (MainFrame), a British curriculum development project, built around a commitment to a competency-based, modular credit accumulation program. The collaborators were three local education authorities (LEAs), those of Bedfordshire, Haringey, and Sheffield,…

Supply chain dynamics in healthcare services.

PubMed

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

Nobel Lecture: Topological quantum matter*

NASA Astrophysics Data System (ADS)

Haldane, F. Duncan M.

2017-10-01

Nobel Lecture, presented December 8, 2016, Aula Magna, Stockholm University. I will describe the history and background of three discoveries cited in this Nobel Prize: The "TKNN" topological formula for the integer quantum Hall effect found by David Thouless and collaborators, the Chern insulator or quantum anomalous Hall effect, and its role in the later discovery of time-reversal-invariant topological insulators, and the unexpected topological spin-liquid state of the spin-1 quantum antiferromagnetic chain, which provided an initial example of topological quantum matter. I will summarize how these early beginnings have led to the exciting, and currently extremely active, field of "topological matter."

Collaborating for Success: Collaborative Arrangements for 14-19 Provision in the West Midlands. Summary and Analysis of Research Findings from Six Case Studies. Research Report

ERIC Educational Resources Information Center

Hardman, Jill

2006-01-01

These findings from six case study areas in the West Midlands examine how 14-19 collaborative arrangements have developed and changed in response to local circumstances, assess the impact of the developments and changes on the curriculum offer, learner choice and participation, and identify the main success factors for starting and sustaining…

Energy Systems Integration Collaborations: NREL + EPRI

DOE Office of Scientific and Technical Information (OSTI.GOV)

2017-04-03

This fact sheet highlights work done at the ESIF in collaboration with EPRI. NREL is collaborating with the Electric Power Research Institute (EPRI) to validate the performance of a Spirae-developed advanced microgrid controller capable of managing 1-10 megawatts of aggregated generation capacity. The aim is to develop a commercially viable and flexible microgrid controller, easily adapted to different end-user applications and to a range of electric grid characteristics.

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian

2010-01-01

Standard approach to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. End-to-end view. Total Lifecycle. Evaluate the readiness of the supply chain during the supply chain development phase.

Teaching Supply Chain Management Complexities: A SCOR Model Based Classroom Simulation

ERIC Educational Resources Information Center

Webb, G. Scott; Thomas, Stephanie P.; Liao-Troth, Sara

2014-01-01

The SCOR (Supply Chain Operations Reference) Model Supply Chain Classroom Simulation is an in-class experiential learning activity that helps students develop a holistic understanding of the processes and challenges of supply chain management. The simulation has broader learning objectives than other supply chain related activities such as the…

Services supporting collaborative alignment of engineering networks

NASA Astrophysics Data System (ADS)

Jansson, Kim; Uoti, Mikko; Karvonen, Iris

2015-08-01

Large-scale facilities such as power plants, process factories, ships and communication infrastructures are often engineered and delivered through geographically distributed operations. The competencies required are usually distributed across several contributing organisations. In these complicated projects, it is of key importance that all partners work coherently towards a common goal. VTT and a number of industrial organisations in the marine sector have participated in a national collaborative research programme addressing these needs. The main output of this programme was development of the Innovation and Engineering Maturity Model for Marine-Industry Networks. The recently completed European Union Framework Programme 7 project COIN developed innovative solutions and software services for enterprise collaboration and enterprise interoperability. One area of focus in that work was services for collaborative project management. This article first addresses a number of central underlying research themes and previous research results that have influenced the development work mentioned above. This article presents two approaches for the development of services that support distributed engineering work. Experience from use of the services is analysed, and potential for development is identified. This article concludes with a proposal for consolidation of the two above-mentioned methodologies. This article outlines the characteristics and requirements of future services supporting collaborative alignment of engineering networks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, B.W.; et al.

The Large Area Picosecond PhotoDetector (LAPPD) Collaboration was formed in 2009 to develop large-area photodetectors capable of time resolutions measured in pico-seconds, with accompanying sub-millimeter spatial resolution. During the next three and one-half years the Collaboration developed the LAPPD design of 20 x 20 cm modules with gains greater thanmore » $10^7$ and non-uniformity less than $$15\\%$$, time resolution less than 50 psec for single photons and spatial resolution of 700~microns in both lateral dimensions. We describe the R\\&D performed to develop large-area micro-channel plate glass substrates, resistive and secondary-emitting coatings, large-area bialkali photocathodes, and RF-capable hermetic packaging. In addition, the Collaboration developed the necessary electronics for large systems capable of precise timing, built up from a custom low-power 15-GigaSample/sec waveform sampling 6-channel integrated circuit and supported by a two-level modular data acquisition system based on Field-Programmable Gate Arrays for local control, data-sparcification, and triggering. We discuss the formation, organization, and technical successes and short-comings of the Collaboration. The Collaboration ended in December 2012 with a transition from R\\&D to commercialization.« less

Education for Sustainable Development and Global Citizenship: Leadership, Collaboration, and Networking in Primary Schools

ERIC Educational Resources Information Center

Bennell, Sheila J.

2015-01-01

The interaction of leadership, collaboration, and networking in the development of Education for Sustainable Development and Global Citizenship (ESDGC) is examined in five north Wales primary schools noted for their ESDGC development. Strong leadership and considerable, but varying, forms of distributed leadership were found in each of the…

Collaborating To Teach Prosocial Skills.

ERIC Educational Resources Information Center

Allsopp, David H.; Santos, Karen E.; Linn, Reid

2000-01-01

This article describes a collaborative prosocial skills program. Steps of the intervention include forming teams of educators, targeting necessary prosocial skills, developing an instructional plan, determining the setting and collaborative roles, delivery instruction, and providing opportunities for student practice, reinforcement, and…

NREL: International Activities - Working with Us

Science.gov Websites

opportunities to develop technology partnerships and researcher-driven collaboration. Technology Partnerships expertise, including our energy analysis capabilities. Researcher-Driven Collaboration NREL scientists formal means, such as collaboration on specific technical topics. NREL researchers also actively

Collaborative project-based learning: an integrative science and technological education project

NASA Astrophysics Data System (ADS)

Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

2017-04-01

Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills.

NucleusHUB.org: A Platform for Collaboration Among Astronomers, Nuclear Astrophysicists, and Planetary Scientists

NASA Astrophysics Data System (ADS)

Meyer, B. S.

2018-04-01

The author and collaborators are developing nucleusHUB.org, built with HUBzero technology, to facilitate interaction among astronomers, nuclear astrophysicists, and planetary scientists. The site allows users to collaborate and publish online tools.

Modeling sustainability in renewable energy supply chain systems

NASA Astrophysics Data System (ADS)

Xie, Fei

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate "environmental thinking" into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain under uncertainties. All models are mixed integer programs, which also involves multi-objective programming method and two-stage/multistage stochastic programming methods. In particular for the long-term sequential planning under uncertainties, to reduce the computational challenges due to the exponential expansion of the scenario tree, I also developed efficient ND-Max method which is more efficient than CPLEX and Nested Decomposition method. Through result analysis of four independent studies, it is found that the proposed modeling frameworks can effectively improve the economic performance, enhance environmental benefits and reduce risks due to systems uncertainties for the biofuel supply chain systems.

An Interactive and Comprehensive Working Environment for High-Energy Physics Software with Python and Jupyter Notebooks

NASA Astrophysics Data System (ADS)

Braun, N.; Hauth, T.; Pulvermacher, C.; Ritter, M.

2017-10-01

Today’s analyses for high-energy physics (HEP) experiments involve processing a large amount of data with highly specialized algorithms. The contemporary workflow from recorded data to final results is based on the execution of small scripts - often written in Python or ROOT macros which call complex compiled algorithms in the background - to perform fitting procedures and generate plots. During recent years interactive programming environments, such as Jupyter, became popular. Jupyter allows to develop Python-based applications, so-called notebooks, which bundle code, documentation and results, e.g. plots. Advantages over classical script-based approaches is the feature to recompute only parts of the analysis code, which allows for fast and iterative development, and a web-based user frontend, which can be hosted centrally and only requires a browser on the user side. In our novel approach, Python and Jupyter are tightly integrated into the Belle II Analysis Software Framework (basf2), currently being developed for the Belle II experiment in Japan. This allows to develop code in Jupyter notebooks for every aspect of the event simulation, reconstruction and analysis chain. These interactive notebooks can be hosted as a centralized web service via jupyterhub with docker and used by all scientists of the Belle II Collaboration. Because of its generality and encapsulation, the setup can easily be scaled to large installations.

A New Approach to Integrate Internet-of-Things and Software-as-a-Service Model for Logistic Systems: A Case Study

PubMed Central

Chen, Shang-Liang; Chen, Yun-Yao; Hsu, Chiang

2014-01-01

Cloud computing is changing the ways software is developed and managed in enterprises, which is changing the way of doing business in that dynamically scalable and virtualized resources are regarded as services over the Internet. Traditional manufacturing systems such as supply chain management (SCM), customer relationship management (CRM), and enterprise resource planning (ERP) are often developed case by case. However, effective collaboration between different systems, platforms, programming languages, and interfaces has been suggested by researchers. In cloud-computing-based systems, distributed resources are encapsulated into cloud services and centrally managed, which allows high automation, flexibility, fast provision, and ease of integration at low cost. The integration between physical resources and cloud services can be improved by combining Internet of things (IoT) technology and Software-as-a-Service (SaaS) technology. This study proposes a new approach for developing cloud-based manufacturing systems based on a four-layer SaaS model. There are three main contributions of this paper: (1) enterprises can develop their own cloud-based logistic management information systems based on the approach proposed in this paper; (2) a case study based on literature reviews with experimental results is proposed to verify that the system performance is remarkable; (3) challenges encountered and feedback collected from T Company in the case study are discussed in this paper for the purpose of enterprise deployment. PMID:24686728

A new approach to integrate Internet-of-things and software-as-a-service model for logistic systems: a case study.

PubMed

Chen, Shang-Liang; Chen, Yun-Yao; Hsu, Chiang

2014-03-28

Cloud computing is changing the ways software is developed and managed in enterprises, which is changing the way of doing business in that dynamically scalable and virtualized resources are regarded as services over the Internet. Traditional manufacturing systems such as supply chain management (SCM), customer relationship management (CRM), and enterprise resource planning (ERP) are often developed case by case. However, effective collaboration between different systems, platforms, programming languages, and interfaces has been suggested by researchers. In cloud-computing-based systems, distributed resources are encapsulated into cloud services and centrally managed, which allows high automation, flexibility, fast provision, and ease of integration at low cost. The integration between physical resources and cloud services can be improved by combining Internet of things (IoT) technology and Software-as-a-Service (SaaS) technology. This study proposes a new approach for developing cloud-based manufacturing systems based on a four-layer SaaS model. There are three main contributions of this paper: (1) enterprises can develop their own cloud-based logistic management information systems based on the approach proposed in this paper; (2) a case study based on literature reviews with experimental results is proposed to verify that the system performance is remarkable; (3) challenges encountered and feedback collected from T Company in the case study are discussed in this paper for the purpose of enterprise deployment.

Nurses' professional values and attitudes toward collaboration with physicians.

PubMed

Brown, Sara S; Lindell, Deborah F; Dolansky, Mary A; Garber, Jeannie S

2015-03-01

Growing evidence suggests that collaborative practice improves healthcare outcomes, but the precursors to collaborative behavior between nurses and physicians have not been fully explored. The purpose of this descriptive correlational study was to describe the professional values held by nurses and their attitudes toward physician-nurse collaboration and to explore the relationships between nurses' characteristics (e.g. education, type of work) and professional values and their attitudes toward nurse-physician collaboration. This descriptive correlational study examines the relationship between nurses' professional values (Nurses Professional Values Scale-Revised) and their attitudes toward nurse-physician collaboration (Jefferson Scale of Attitudes toward Physician-Nurse Collaboration). Permission to conduct the study was received from the hospital, and the Institutional Review Boards of the healthcare system and the participating university. A convenience sample of 231 registered nurses from a tertiary hospital in the United States was surveyed. A significant positive relationship was found between nurses' professional values and better attitudes toward collaboration with physicians (r = .26, p < .01). Attitude toward collaboration with physicians was also positively associated with master's or higher levels of education (F(3, 224) = 4.379, p = .005). The results of this study can be helpful to nurse administrators who are responsible for developing highly collaborative healthcare teams and for nurse educators who are focused on developing professional values in future nurses. © The Author(s) 2014.

The Collaboration Readiness of Transdisciplinary Research Teams and Centers

PubMed Central

Hall, Kara L.; Stokols, Daniel; Moser, Richard P.; Taylor, Brandie K.; Thornquist, Mark D.; Nebeling, Linda C.; Ehret, Carolyn C.; Barnett, Matthew J.; McTiernan, Anne; Berger, Nathan A.; Goran, Michael I.; Jeffery, Robert W.

2009-01-01

Growing interest in promoting cross-disciplinary collaboration among health scientists has prompted several federal agencies, including the NIH, to establish large, multicenter initiatives intended to foster collaborative research and training. In order to assess whether these initiatives are effective in promoting scientific collaboration that ultimately results in public health improvements, it is necessary to develop new strategies for evaluating research processes and products as well as the longer-term societal outcomes associated with these programs. Ideally, evaluative measures should be administered over the entire course of large initiatives, including their near-term and later phases. The present study focuses on the development of new tools for assessing the readiness for collaboration among health scientists at the outset (during Year One) of their participation in the National Cancer Institute’s Transdisciplinary Research on Energetics and Cancer (TREC) initiative. Indexes of collaborative readiness, along with additional measures of near-term collaborative processes, were administered as part of the TREC Year-One evaluation survey. Additionally, early progress toward scientific collaboration and integration was assessed, using a protocol for evaluating written research products. Results from the Year-One survey and the ratings of written products provide evidence of cross-disciplinary collaboration among participants during the first year of the initiative, and also reveal opportunities for enhancing collaborative processes and outcomes during subsequent phases of the project. The implications of these findings for future evaluations of team science initiatives are discussed. PMID:18619396

Tools and approaches to ensure quality of vaccines throughout the cold chain.

PubMed

Kartoglu, Umit; Milstien, Julie

2014-07-01

The Expanded Program on Immunization was designed 40 years ago for two types of vaccines: those that are heat stable but freeze sensitive and those that are stable to freezing but heat labile. A cold chain was developed for transport and storage of such vaccines and established in all countries, despite limited access to resources and electricity in the poorest areas. However, cold chain problems occur in all countries. Recent changes to vaccines and vaccine handling include development and introduction of new vaccines with a wide range of characteristics, improvement of heat stability of several basic vaccines, observation of vaccine freezing as a real threat, development of regulatory pathways for both vaccine development and the supply chain, and emergence of new temperature monitoring devices that can pinpoint and avoid problems. With such tools, public health groups have now encouraged development of vaccines labeled for use in flexible cold chains and these tools should be considered for future systems.

Tools and approaches to ensure quality of vaccines throughout the cold chain

PubMed Central

Kartoglu, Umit; Milstien, Julie

2014-01-01

The Expanded Program on Immunization was designed 40 years ago for two types of vaccines: those that are heat stable but freeze sensitive and those that are stable to freezing but heat labile. A cold chain was developed for transport and storage of such vaccines and established in all countries, despite limited access to resources and electricity in the poorest areas. However, cold chain problems occur in all countries. Recent changes to vaccines and vaccine handling include development and introduction of new vaccines with a wide range of characteristics, improvement of heat stability of several basic vaccines, observation of vaccine freezing as a real threat, development of regulatory pathways for both vaccine development and the supply chain, and emergence of new temperature monitoring devices that can pinpoint and avoid problems. With such tools, public health groups have now encouraged development of vaccines labeled for use in flexible cold chains and these tools should be considered for future systems. PMID:24865112

Developing a grounded theory for interprofessional collaboration acquisition using facilitator and actor perspectives in simulated wilderness medical emergencies.

PubMed

Smith, Heather A; Reade, Maurianne; Marr, Marion; Jeeves, Nicholas

2017-01-01

Interprofessional collaboration is a complex process that has the potential to transform patient care for the better in urban, rural and remote healthcare settings. Simulation has been found to improve participants' interprofessional competencies, but the mechanisms by which interprofessionalism is learned have yet to be understood. A rural wilderness medicine conference (WildER Med) in northern Ontario, Canada with simulated medical scenarios has been demonstrated to be effective in improving participants' collaboration without formal interprofessional education (IPE) curriculum. Interprofessionalism may be taught through rural and remote medical simulation, as done in WildER Med where participants' interprofessional competencies improved without any formal IPE curriculum. This learning may be attributed to the informal and hidden curriculum. Understanding the mechanism by which this rural educational experience contributed to participants' learning to collaborate requires insight into the events before, during and after the simulations. The authors drew upon feedback from facilitators and patient actors in one-on-one interviews to develop a grounded theory for how collaboration is taught and learned. Sharing emerged as the core concept of a grounded theory to explain how team members acquired interprofessional collaboration competencies. Sharing was enacted through the strategies of developing common goals, sharing leadership, and developing mutual respect and understanding. Further analysis of the data and literature suggests that the social wilderness environment was foundational in enabling sharing to occur. Medical simulations in other rural and remote settings may offer an environment conducive to collaboration and be effective in teaching collaboration. When designing interprofessional education, health educators should consider using emergency response teams or rural community health teams to optimize the informal and hidden curriculum contributing to interprofessional learning.

Developing Collaboration Skills in Team Undergraduate Research Experiences

ERIC Educational Resources Information Center

Sturner, Kelly K.; Bishop, Pamela; Lenhart, Suzanne M.

2017-01-01

Interdisciplinary undergraduate research experiences often require students to work in teams with other students and researchers from different disciplines, creating a need for development of new skills in interdisciplinary collaboration. In this paper, we describe our unique efforts to mentor participants in developing these skills during our…

Anesthesia Nursing: A Collaborative Model for Graduate Education.

ERIC Educational Resources Information Center

Chamings, Patricia A.; And Others

1989-01-01

The authors describe development of a collaborative graduate concentration in anesthesia nursing involving North Carolina Baptist Hospital and the University of North Carolina at Greensboro. Project components included (1) developing a cohesive faculty work group, (2) developing the curriculum, and (3) combining resources through an administrative…

Learning Human Aspects of Collaborative Software Development

ERIC Educational Resources Information Center

Hadar, Irit; Sherman, Sofia; Hazzan, Orit

2008-01-01

Collaboration has become increasingly widespread in the software industry as systems have become larger and more complex, adding human complexity to the technological complexity already involved in developing software systems. To deal with this complexity, human-centric software development methods, such as Extreme Programming and other agile…

Developing Creativity through Collaborative Problem Solving

ERIC Educational Resources Information Center

Albert, Lillie R.; Kim, Rina

2013-01-01

This paper discusses an alternative approach for developing problem solving experiences for students. The major argument is that students can develop their creativity by engaging in collaborative problem solving activities in which they apply a variety of mathematical methods creatively to solve problems. The argument is supported by: considering…

Action Research and Collaborative Research: Their Specific Contributions to Professional Development

ERIC Educational Resources Information Center

Savoie-Zajc, Lorraine; Descamps-Bednarz, Nadine

2007-01-01

The increasing complexity of the teaching profession calls for engaged professionals in their professional development. This article claims that participative types of research contribute differently to professional development. Its intent is to explore the different contributions action research and collaborative research bring. One action…

Tangled nonlinear driven chain reactions of all optical singularities

NASA Astrophysics Data System (ADS)

Vasil'ev, V. I.; Soskin, M. S.

2012-03-01

Dynamics of polarization optical singularities chain reactions in generic elliptically polarized speckle fields created in photorefractive crystal LiNbO3 was investigated in details Induced speckle field develops in the tens of minutes scale due to photorefractive 'optical damage effect' induced by incident beam of He-Ne laser. It was shown that polarization singularities develop through topological chain reactions of developing speckle fields driven by photorefractive nonlinearities induced by incident laser beam. All optical singularities (C points, optical vortices, optical diabolos,) are defined by instantaneous topological structure of the output wavefront and are tangled by singular optics lows. Therefore, they have develop in tangled way by six topological chain reactions driven by nonlinear processes in used nonlinear medium (photorefractive LiNbO3:Fe in our case): C-points and optical diabolos for right (left) polarized components domains with orthogonally left (right) polarized optical vortices underlying them. All elements of chain reactions consist from loop and chain links when nucleated singularities annihilated directly or with alien singularities in 1:9 ratio. The topological reason of statistics was established by low probability of far enough separation of born singularities pair from existing neighbor singularities during loop trajectories. Topology of developing speckle field was measured and analyzed by dynamic stokes polarimetry with few seconds' resolution. The hierarchy of singularities govern scenario of tangled chain reactions was defined. The useful space-time data about peculiarities of optical damage evolution were obtained from existence and parameters of 'islands of stability' in developing speckle fields.

CPS-Rater: Automated Sequential Annotation for Conversations in Collaborative Problem-Solving Activities. Research Report. ETS RR-17-58

ERIC Educational Resources Information Center

Hao, Jiangang; Chen, Lei; Flor, Michael; Liu, Lei; von Davier, Alina A.

2017-01-01

Conversations in collaborative problem-solving activities can be used to probe the collaboration skills of the team members. Annotating the conversations into different collaboration skills by human raters is laborious and time consuming. In this report, we report our work on developing an automated annotation system, CPS-rater, for conversational…

Difficulties encountered in collaborative care: logistics trumps desire.

PubMed

Legault, Frances; Humbert, Jennie; Amos, Stephanie; Hogg, William; Ward, Natalie; Dahrouge, Simone; Ziebell, Laura

2012-01-01

This study examines the development of collaborative relationships between family physicians (FPs) and Anticipatory And Preventative Team Care (APTCare) team members providing care to medically complex patients who have been identified as at-risk for negative health outcomes. We undertook a qualitative study of a primary health care intervention in a family practice. Interviews were held with FPs and ATPCare intervention nurse practitioners (NPs) and pharmacists. Focus groups were conducted and a survey was administered to participating FPs, NPs, and pharmacists. NPs and pharmacists maintained a log recording their tasks and moments of collaboration. Scheduling demands rendered face-to-face collaboration difficult, leaving the team to rely on technological tools to keep in touch. Limited space meant the APTCare team had to work out of a downstairs office, limiting informal interactions with the practitioners on the main level. We demonstrate that the difficulties inherent in collaborative care are independent of the patient population being cared for. Regardless of the patient population and sector of health care, developing collaborative relationships and learning to work collaboratively is difficult and takes time. What many of these teams need is ongoing support and education about how to make these collaborative care practices work.

The GLOBAL Learning and Observations to Benefit the Environment (GLOBE) Collaboration System. Building a robust international collaboration environment for teachers, scientists and students.

NASA Astrophysics Data System (ADS)

Overoye, D.; Lewis, C.

2016-12-01

The Global Learning and Observations to Benefit the Environment (GLOBE) Program is a worldwide hands-on, primary and secondary school-based science and education program founded on Earth Day 1995. Implemented in 117 countries, GLOBE promotes the teaching and learning of science, supporting students, teachers and scientists worldwide to collaborate with each other on inquiry-based investigations of the Earth system. As an international platform supporting a large number and variety of stakeholders, the GLOBE Data Information System (DIS) was re-built with the goal of providing users the support needed to foster and develop collaboration between teachers, students and scientists while supporting the collection and visualization of over 50 different earth science investigations (protocols). There have been many challenges to consider as we have worked to prototype and build various tools to support collaboration across the GLOBE community - language, security, time zones, user roles and the Child Online Protection Act (COPA) to name a few. During the last 3 years the re-built DIS has been in operation we have supported user to user collaboration, school to school collaboration, project/campaign to user collaboration and scientist to scientist collaboration. We have built search tools to facilitate finding collaboration partners. The tools and direction continue to evolve based on feedback, evolving needs and changes in technology. With this paper we discuss our approach for dealing with some of the collaboration challenges, review tools built to encourage and support collaboration, and analyze which tools have been successful and which have not. We will review new ideas for collaboration in the GLOBE community that are guiding upcoming development.

Perceived Benefits of Collaboration Between Local Health Departments and Schools and Programs of Public Health: A Mixed-Methods Study.

PubMed

Kovach, Kevin A; Welter, Christina R; Seweryn, Steven M; Torres, Griselle

2018-06-20

Collaboration between local health departments (LHDs) and schools and programs of public health (SPPH) may be a way to improve practice, education, and research. However, little is known about why LHDs and SPPH collaborate. This mixed-methods study addressed this issue by exploring what LHDs and SPPH perceive to be beneficial about their collaboration. A mixed-methods study using quantitative and qualitative data was conducted. A survey of 2000 LHDs that completed the 2013 National Profile of LHDs measured how important and effective LHDs perceived 30 indicators of the 10 essential public health services to be for collaboration with SPPH. Focus groups were held with LHD officials and the faculty from SPPH to further explore their perceptions of the mutual benefits of their collaboration. This study showed that LHD officials and the faculty from SPPH valued their collaborative work because it can improve education and training, support public health accreditation, enhance LHD credibility, enhance LHD technological capabilities, and improve research and evidence-based practice. Benefits increased with an increase in the degree of collaboration. This also showed that LHD officials would like to collaborate more closely with SPPH. Collaboration between LHDs and SPPH is mutually beneficial, and close collaboration can help transform public health practice, education, and research. In light of this, more attention should be paid to developing goals and objectives for a collaborative agenda. Attention should be paid not only to the immediate needs of the organizations and individuals involved but also to their long-term goals and underlying desires. Funding opportunities to support the development of partnerships between LHDs and SPPH are needed to provide tangible tasks and opportunities for taking a more long-term and strategic view for collaborative relationships.

Virtual pharmaceutical companies: collaborating flexibly in pharmaceutical development.

PubMed

Forster, Simon P; Stegmaier, Julia; Spycher, Rene; Seeger, Stefan

2014-03-01

Research and development (R&D) collaborations represent one approach chosen by the pharmaceutical industry to tackle current challenges posed by declining internal R&D success rates and fading of the blockbuster model. In recent years, a flexible concept to collaborate in R&D has emerged: virtual pharmaceutical companies (VPCs). These differ from other R&D companies, such as biotech start-ups, collaborating with big pharmaceutical companies, because they solely comprise experienced teams of managers. VPCs have only been described anecdotally in literature. Thus, we present here the characteristics of a VPC and suggest how big pharma can leverage the concept of VPCs by introducing five possible modes of collaboration. We find that one mode, investing, is particularly promising for big pharma. Copyright © 2013 Elsevier Ltd. All rights reserved.

A meta-heuristic approach supported by NSGA-II for the design and plan of supply chain networks considering new product development

NASA Astrophysics Data System (ADS)

Alizadeh Afrouzy, Zahra; Paydar, Mohammad Mahdi; Nasseri, Seyed Hadi; Mahdavi, Iraj

2018-03-01

There are many reasons for the growing interest in developing new product projects for any firm. The most embossed reason is surviving in a highly competitive industry which the customer tastes are changing rapidly. A well-managed supply chain network can provide the most profit for firms due to considering new product development. Along with profit, customer satisfaction and production of new products are goals which lead to a more efficient supply chain. As new products appear in the market, the old products could become obsolete, and then phased out. The most important parameter in a supply chain which considers new and developed products is the time that developed and new products are introduced and old products are phased out. With consideration of the factors noted above, this study proposes to design a tri-objective multi-echelon multi-product multi-period supply chain model, which incorporates product development and new product production and their effects on supply chain configuration. The supply chain under consideration is assumed to consist of suppliers, manufacturers, distributors and customer groups. In terms of overcoming NP-hardness of the proposed model and in order to solve the complicated problem, a non-dominated sorting genetic algorithm is employed. As there is no benchmark available in the literature, the non-dominated ranking genetic algorithm is developed to validate the results obtained and some test problems are provided to show the applicability of the proposed methodology and evaluate the performance of the algorithms.

Effective Online Practices for International Learning Collaborations

ERIC Educational Resources Information Center

Ray, Waverly C.; Muñiz-Solari, Osvaldo; Klein, Phil; Solem, Michael

2012-01-01

The Association of American Geographers' Center for Global Geography Education aims to internationalize geography in higher education by providing materials and activities to support international learning collaborations. From 2007-2011, geographers in different countries collaboratively developed online learning materials and trialed these…

Implementation of system dynamic simulation method to optimize profit in supply chain network of vegetable product

NASA Astrophysics Data System (ADS)

Tama, I. P.; Akbar, Z.; Eunike, A.

2018-04-01

Vegetables are categorized as a perishable product, which is a product with short lifespan thus requires proper handling and planning to reduce losses caused by the short lifespan. In order to reduce the losses, coordination among the players in the supply chain is required. On the other hand, the decision in the supply chain of vegetables and other farming products in the traditional market of developing country is independent among the players. This research is conducted by using System Dynamic Simulation method to develop model and scenario by coordinating the supply quantity amongst players in the supply chain. The scenarios are developed based on newsboy inventory model. This study aims to compare scenarios combining tiers involved in coordination program. The result shows that coordination in supply chain increases total supply chain profit, although there will always be players who experienced decrements in profit. The scenario of coordination among the farmer, the distributor, and the wholesaler resulted in the highest increase in total supply chain profit compared to other coordination scenarios, with an increased value of 10.49%.

NASA Remediation Technology Collaboration Development Task, Overview and Project Summaries

NASA Technical Reports Server (NTRS)

Romeo, James G.

2014-01-01

An overview presentation of NASA's Remediation Technology Collaboration Development Task including the following project summaries: in situ groundwater monitor, in situ chemical oxidation, in situ bioremediation, horizontal multi-port well, and high resolution site characterization.

Mission possible: twenty-five years of university and college collaboration in baccalaureate nursing education.

PubMed

Zawaduk, Cheryl; Duncan, Susan; Mahara, M Star; Tate, Betty; Callaghan, Doris; McCullough, Deborah; Chapman, Marilyn; Van Neste-Kenny, Jocelyne

2014-10-01

In Canada, nurse educators from five postsecondary institutions in the province of British Columbia established a collaborative nursing education initiative in 1989, with a vision to transform RN college diploma programs to baccalaureate degree programs. The principles, processes, and structures that served to develop and sustain this nursing education initiative are briefly reviewed. Curriculum, scholarship, and education legislation serve as platforms to critically explore a 25-year history (1989-2014) of successes, challenges, and transitions within this unique nursing education collaboration. The importance of curriculum development as faculty development, program evaluation as an adjunct to pedagogical scholarship, diversity of cross-institutional mandates, political interplay in nursing education, collegiality, and courageous leadership are highlighted. Nurse educators seeking to create successful collaborations must draw upon well-defined principles and organizational structures and processes to guide pedagogical practices and inquiry while remaining mindful of and engaged in professional and societal developments. Copyright 2014, SLACK Incorporated.

Business and public health collaboration for emergency preparedness in Georgia: a case study.

PubMed

Buehler, James W; Whitney, Ellen A; Berkelman, Ruth L

2006-11-20

Governments may be overwhelmed by a large-scale public health emergency, such as a massive bioterrorist attack or natural disaster, requiring collaboration with businesses and other community partners to respond effectively. In Georgia, public health officials and members of the Business Executives for National Security have successfully collaborated to develop and test procedures for dispensing medications from the Strategic National Stockpile. Lessons learned from this collaboration should be useful to other public health and business leaders interested in developing similar partnerships. The authors conducted a case study based on interviews with 26 government, business, and academic participants in this collaboration. The partnership is based on shared objectives to protect public health and assure community cohesion in the wake of a large-scale disaster, on the recognition that acting alone neither public health agencies nor businesses are likely to manage such a response successfully, and on the realization that business and community continuity are intertwined. The partnership has required participants to acknowledge and address multiple challenges, including differences in business and government cultures and operational constraints, such as concerns about the confidentiality of shared information, liability, and the limits of volunteerism. The partnership has been facilitated by a business model based on defining shared objectives, identifying mutual needs and vulnerabilities, developing carefully-defined projects, and evaluating proposed project methods through exercise testing. Through collaborative engagement in progressively more complex projects, increasing trust and understanding have enabled the partners to make significant progress in addressing these challenges. As a result of this partnership, essential relationships have been established, substantial private resources and capabilities have been engaged in government preparedness programs, and a model for collaborative, emergency mass dispensing of pharmaceuticals has been developed, tested, and slated for expansion. The lessons learned from this collaboration in Georgia should be considered by other government and business leaders seeking to develop similar partnerships.

Business and public health collaboration for emergency preparedness in Georgia: a case study

PubMed Central

Buehler, James W; Whitney, Ellen A; Berkelman, Ruth L

2006-01-01

Background Governments may be overwhelmed by a large-scale public health emergency, such as a massive bioterrorist attack or natural disaster, requiring collaboration with businesses and other community partners to respond effectively. In Georgia, public health officials and members of the Business Executives for National Security have successfully collaborated to develop and test procedures for dispensing medications from the Strategic National Stockpile. Lessons learned from this collaboration should be useful to other public health and business leaders interested in developing similar partnerships. Methods The authors conducted a case study based on interviews with 26 government, business, and academic participants in this collaboration. Results The partnership is based on shared objectives to protect public health and assure community cohesion in the wake of a large-scale disaster, on the recognition that acting alone neither public health agencies nor businesses are likely to manage such a response successfully, and on the realization that business and community continuity are intertwined. The partnership has required participants to acknowledge and address multiple challenges, including differences in business and government cultures and operational constraints, such as concerns about the confidentiality of shared information, liability, and the limits of volunteerism. The partnership has been facilitated by a business model based on defining shared objectives, identifying mutual needs and vulnerabilities, developing carefully-defined projects, and evaluating proposed project methods through exercise testing. Through collaborative engagement in progressively more complex projects, increasing trust and understanding have enabled the partners to make significant progress in addressing these challenges. Conclusion As a result of this partnership, essential relationships have been established, substantial private resources and capabilities have been engaged in government preparedness programs, and a model for collaborative, emergency mass dispensing of pharmaceuticals has been developed, tested, and slated for expansion. The lessons learned from this collaboration in Georgia should be considered by other government and business leaders seeking to develop similar partnerships. PMID:17116256

A Stigmergy Collaboration Approach in the Open Source Software Developer Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Xiaohui; Pullum, Laura L; Treadwell, Jim N

2009-01-01

The communication model of some self-organized online communities is significantly different from the traditional social network based community. It is problematic to use social network analysis to analyze the collaboration structure and emergent behaviors in these communities because these communities lack peer-to-peer connections. Stigmergy theory provides an explanation of the collaboration model of these communities. In this research, we present a stigmergy approach for building an agent-based simulation to simulate the collaboration model in the open source software (OSS) developer community. We used a group of actors who collaborate on OSS projects through forums as our frame of reference andmore » investigated how the choices actors make in contributing their work on the projects determines the global status of the whole OSS project. In our simulation, the forum posts serve as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing the developer agents behavior selection probability.« less

Computational modelling of cell chain migration reveals mechanisms that sustain follow-the-leader behaviour

PubMed Central

Wynn, Michelle L.; Kulesa, Paul M.; Schnell, Santiago

2012-01-01

Follow-the-leader chain migration is a striking cell migratory behaviour observed during vertebrate development, adult neurogenesis and cancer metastasis. Although cell–cell contact and extracellular matrix (ECM) cues have been proposed to promote this phenomenon, mechanisms that underlie chain migration persistence remain unclear. Here, we developed a quantitative agent-based modelling framework to test mechanistic hypotheses of chain migration persistence. We defined chain migration and its persistence based on evidence from the highly migratory neural crest model system, where cells within a chain extend and retract filopodia in short-lived cell contacts and move together as a collective. In our agent-based simulations, we began with a set of agents arranged as a chain and systematically probed the influence of model parameters to identify factors critical to the maintenance of the chain migration pattern. We discovered that chain migration persistence requires a high degree of directional bias in both lead and follower cells towards the target. Chain migration persistence was also promoted when lead cells maintained cell contact with followers, but not vice-versa. Finally, providing a path of least resistance in the ECM was not sufficient alone to drive chain persistence. Our results indicate that chain migration persistence depends on the interplay of directional cell movement and biased cell–cell contact. PMID:22219399

The Impacts of Regulations and Financial Development on the Operations of Supply Chains with Greenhouse Gas Emissions

PubMed Central

Xiao, Zhuang; Tian, Yixiang; Yuan, Zheng

2018-01-01

To establish a micro foundation to understand the impacts of greenhouse gas (GHG) emission regulations and financial development levels on firms’ GHG emissions, we build a two-stage dynamic game model to incorporate GHG emission regulations (in terms of an emission tax) and financial development (represented by the corresponding financing cost) into a two-echelon supply chain. With the subgame perfect equilibrium, we identify the conditions to determine whether an emission regulatory policy and/or financial development can affect GHG emissions in the supply chain. We also reveal the impacts of the strictness of GHG emission regulation, the financial development level, and the unit GHG emission rate on the operations of the supply chain and the corresponding profitability implications. Managerial insights are also discussed. PMID:29470451