Innovations in cold chain equipment for immunization supply chains.

PubMed

Robertson, Joanie; Franzel, Lauren; Maire, Denis

2017-04-19

Since 2010, numerous new technologies have entered the immunization cold chain equipment market. The World Health Organization (WHO) Immunization Devices Programme-Performance, Quality and Safety (PQS)-has played a key role in bringing these to market. In this article, the authors explore the emergence of new cold chain equipment technologies from 2004 to 2016 and the role of PQS in this evolution. This review focuses on three major vaccine cold chain technology innovations-solar direct-drive refrigerators, long-term passive cold boxes, and equipment with user-independent freeze prevention. For the review, we used online data from WHO PQS, a literature search, and unpublished research reports. Timelines with key milestones in the emergence of the three focus technologies show delays of between one and three years between earliest field trials and publication of WHO specifications; procurement builds after the WHO prequalification of initial devices. The timelines show the role of PQS as both gatekeeper and enabler for cold chain equipment technologies. The use of target product profiles by PQS has increased its ability to signal preferred attributes and to engage with manufacturers during the product-development stage. Procurement data show how demand for solar direct-drive refrigerators increased over time. Gavi, the Vaccine Alliance, is employing demand-generation strategies to try to drive procurement of technologies with favorable technical attributes. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Assessment of Food Chain Pathway Parameters in Biosphere Models: Annual Progress Report for Fiscal Year 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Napier, Bruce A.; Krupka, Kenneth M.; Fellows, Robert J.

2004-12-02

This Annual Progress Report describes the work performed and summarizes some of the key observations to date on the U.S. Nuclear Regulatory Commission’s project Assessment of Food Chain Pathway Parameters in Biosphere Models, which was established to assess and evaluate a number of key parameters used in the food-chain models used in performance assessments of radioactive waste disposal facilities. Section 2 of this report describes activities undertaken to collect samples of soils from three regions of the United States, the Southeast, Northwest, and Southwest, and perform analyses to characterize their physical and chemical properties. Section 3 summarizes information gathered regardingmore » agricultural practices and common and unusual crops grown in each of these three areas. Section 4 describes progress in studying radionuclide uptake in several representative crops from the three soil types in controlled laboratory conditions. Section 5 describes a range of international coordination activities undertaken by Project staff in order to support the underlying data needs of the Project. Section 6 provides a very brief summary of the status of the GENII Version 2 computer program, which is a “client” of the types of data being generated by the Project, and for which the Project will be providing training to the US NRC staff in the coming Fiscal Year. Several appendices provide additional supporting information.« less

Ergonomics and sustainability--challenges from global supply chains.

PubMed

Hasle, Peter; Jensen, Per Langaa

2012-01-01

The development of globalised supply chains is a major challenge for sustainability. For several years, there has been discussion within the profession whether and how ergonomics and human factors can play a role. Based on our research, we have identified five major challenges from global supply chains especially related to the social aspects of sustainability: (1) criteria for social sustainability, (2) the role of key performance indicators in the management of supply chains, (3) the constant changes in supply chains, (4) the challenge in establishing participation, and (5) the development of agency and regulatory mechanisms. There are obviously no clear and simple solutions to these challenges. One possible avenue for progress might lie in acquiring a greater understanding of the challenges from global supply chains and developing a strategy which combines social and long-term business sustainability. Starting from such a basis, the next step would be to find ways for the ergonomics and human factors community to create international collaboration which can impact specific global supply chains.

Surface Connectivity and Interocean Exchanges From Drifter-Based Transition Matrices

NASA Astrophysics Data System (ADS)

McAdam, Ronan; van Sebille, Erik

2018-01-01

Global surface transport in the ocean can be represented by using the observed trajectories of drifters to calculate probability distribution functions. The oceanographic applications of the Markov Chain approach to modeling include tracking of floating debris and water masses, globally and on yearly-to-centennial time scales. Here we analyze the error inherent with mapping trajectories onto a grid and the consequences for ocean transport modeling and detection of accumulation structures. A sensitivity analysis of Markov Chain parameters is performed in an idealized Stommel gyre and western boundary current as well as with observed ocean drifters, complementing previous studies on widespread floating debris accumulation. Focusing on two key areas of interocean exchange—the Agulhas system and the North Atlantic intergyre transport barrier—we assess the capacity of the Markov Chain methodology to detect surface connectivity and dynamic transport barriers. Finally, we extend the methodology's functionality to separate the geostrophic and nongeostrophic contributions to interocean exchange in these key regions.

Nested Interrupt Analysis of Low Cost and High Performance Embedded Systems Using GSPN Framework

NASA Astrophysics Data System (ADS)

Lin, Cheng-Min

Interrupt service routines are a key technology for embedded systems. In this paper, we introduce the standard approach for using Generalized Stochastic Petri Nets (GSPNs) as a high-level model for generating CTMC Continuous-Time Markov Chains (CTMCs) and then use Markov Reward Models (MRMs) to compute the performance for embedded systems. This framework is employed to analyze two embedded controllers with low cost and high performance, ARM7 and Cortex-M3. Cortex-M3 is designed with a tail-chaining mechanism to improve the performance of ARM7 when a nested interrupt occurs on an embedded controller. The Platform Independent Petri net Editor 2 (PIPE2) tool is used to model and evaluate the controllers in terms of power consumption and interrupt overhead performance. Using numerical results, in spite of the power consumption or interrupt overhead, Cortex-M3 performs better than ARM7.

SCOR based key success factors in cooking oil supply chain buyers perspective in Padang City

NASA Astrophysics Data System (ADS)

Zahara, Fatimah; Hadiguna, Rika Ampuh

2017-11-01

Supply chain of cooking oil is a network of companies from palm oil as raw material to retailers which work to create the value and deliver products into the end consumers. This paper is aimed to study key success factors based on consumer's perspective as the last stage in the supply chain. Consumers who are examined in this study are restaurants management or owners. Restaurant is the biggest consumption of cooking oil. The factors is studied based on Supply Chain Operation Reference (SCOR) version 10.0. Factors used are formulated based on the third-level metrics of SCOR Model. Factors are analyzed using factors analysis. This study found factors which become key success factors in managing supply chain of cooking oil encompass reliability, responsiveness and agility. Key success factors can be applied by governments as policy making and cooking oil companies as formulation of the distribution strategies.

Tethered Lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Archer, Lynden

We have performed extensive experimental and theoretical studies of interfacial friction, relaxation dynamics, and thermodynamics of polymer chains tethered to points, planes, and particles. A key result from our tribology studies using lateral force microscopy (LFM) measurements of polydisperse brushes of linear and branched chains densely grafted to planar substrates is that there are exceedingly low friction coefficients for these systems. Specific project achievements include: (1) Synthesis of three-tiered lubricant films containing controlled amounts of free and pendent PDMS chains, and investigated the effect of their molecular weight and volume fraction on interfacial friction. (2.) Detailed studies of a familymore » of hairy particles termed nanoscale organic hybrid materials (NOHMs) and demonstration of their use as lubricants.« less

Modelling Lean and Green Supply Chain

NASA Astrophysics Data System (ADS)

Duarte, Susana Carla Vieira Lino Medina

The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the implementation of a hybrid supply chain.

Knowledge management system for risk mitigation in supply chain uncertainty: case from automotive battery supply chain

NASA Astrophysics Data System (ADS)

Marie, I. A.; Sugiarto, D.; Surjasa, D.; Witonohadi, A.

2018-01-01

Automotive battery supply chain include battery manufacturer, sulphuric acid suppliers, polypropylene suppliers, lead suppliers, transportation service providers, warehouses, retailers and even customers. Due to the increasingly dynamic condition of the environment, supply chain actors were required to improve their ability to overcome various uncertainty issues in the environment. This paper aims to describe the process of designing a knowledge management system for risk mitigation in supply chain uncertainty. The design methodology began with the identification of the knowledge needed to solve the problems associated with uncertainty and analysis of system requirements. The design of the knowledge management system was described in the form of a data flow diagram. The results of the study indicated that key knowledge area that needs to be managed were the knowledge to maintain the stability of process in sulphuric acid process and knowledge to overcome the wastes in battery manufacturing process. The system was expected to be a media acquisition, dissemination and storage of knowledge associated with the uncertainty in the battery supply chain and increase the supply chain performance.

Chaining for Flexible and High-Performance Key-Value Systems

DTIC Science & Technology

2012-09-01

store that is fault tolerant achieves high performance and availability, and offers strong data consistency? We present a new replication protocol...effective high performance data access and analytics, many sites use simpler data model “ NoSQL ” systems. ese systems store and retrieve data only by...DRAM, Flash, and disk-based storage; can act as an unreliable cache or a durable store ; and can offer strong or weak data consistency. e value of

A Novel Re-keying Function Protocol (NRFP) For Wireless Sensor Network Security

PubMed Central

Abdullah, Maan Younis; Hua, Gui Wei; Alsharabi, Naif

2008-01-01

This paper describes a novel re-keying function protocol (NRFP) for wireless sensor network security. A re-keying process management system for sensor networks is designed to support in-network processing. The design of the protocol is motivated by decentralization key management for wireless sensor networks (WSNs), covering key deployment, key refreshment, and key establishment. NRFP supports the establishment of novel administrative functions for sensor nodes that derive/re-derive a session key for each communication session. The protocol proposes direct connection, in-direct connection and hybrid connection. NRFP also includes an efficient protocol for local broadcast authentication based on the use of one-way key chains. A salient feature of the authentication protocol is that it supports source authentication without precluding innetwork processing. Security and performance analysis shows that it is very efficient in computation, communication and storage and, that NRFP is also effective in defending against many sophisticated attacks. PMID:27873963

A Novel Re-keying Function Protocol (NRFP) For Wireless Sensor Network Security.

PubMed

Abdullah, Maan Younis; Hua, Gui Wei; Alsharabi, Naif

2008-12-04

This paper describes a novel re-keying function protocol (NRFP) for wireless sensor network security. A re-keying process management system for sensor networks is designed to support in-network processing. The design of the protocol is motivated by decentralization key management for wireless sensor networks (WSNs), covering key deployment, key refreshment, and key establishment. NRFP supports the establishment of novel administrative functions for sensor nodes that derive/re-derive a session key for each communication session. The protocol proposes direct connection, in-direct connection and hybrid connection. NRFP also includes an efficient protocol for local broadcast authentication based on the use of one-way key chains. A salient feature of the authentication protocol is that it supports source authentication without precluding in-network processing. Security and performance analysis shows that it is very efficient in computation, communication and storage and, that NRFP is also effective in defending against many sophisticated attacks.

The people factor: An analysis of the human resources landscape for immunization supply chain management.

PubMed

Kasonde, Musonda; Steele, Pamela

2017-04-19

Human resources is the backbone of any system and the key enabler for all other functions to effectively perform. This is no different with the Immunization Supply Chain, more so in todays' complex operating environment with the increasing strain caused by new vaccines and expanding immunization programmes (Source: WHO, UNICEF). In order to drive the change that is required for sustainability and continuous improvement, every immunization supply chain needs an effective leader. A dedicated and competent immunization supply chain leader with adequate numbers of skilled, accountable, motivated and empowered personnel at all levels of the health system to overcome existing and emerging immunization supply chain (ISC) challenges. Without an effective supply chain leader supported by capable and motivated staff, none of the interventions designed to strengthen the supply chain can be effective or sustainable (Source: Gavi Alliance SC Strategy 2014). This landscape analysis was preceded by an HR Evidence Review (March 2014) and has served to inform global partner strategies and country activities, as well as highlight where most support is required. The study also aimed to define the status quo in order to create some form of baseline against which to measure the impact of interventions related to HR going forward. The analysis was comprised of a comprehensive desk review, a survey of 40 respondents from 32 countries and consultations with ISC practitioners in several forums. The findings highlight key areas that should inform the pillars of a HR capacity development plan. At the same time, it revealed that there are some positive examples of where countries are actively addressing some of the issues identified and putting in place mechanisms and structures to optimize the SC function. Copyright © 2017. Published by Elsevier Ltd.

Implementation of a real option in a sustainable supply chain: an empirical study of alkaline battery recycling

NASA Astrophysics Data System (ADS)

Cucchiella, Federica; D'Adamo, Idiano; Gastaldi, Massimo; Lenny Koh, S. C.

2014-06-01

Green supply chain management (GSCM) has emerged as a key approach for enterprises seeking to become environmentally sustainable. This paper aims to evaluate and describe the advantages of a GSCM approach by analysing practices and performance consequences in the battery recycling sector. It seeks to integrate works in supply chain management (SCM), environmental management, performance management and real option (RO) theory into one framework. In particular, life cycle assessment (LCA) is applied to evaluate the environmental impact of a battery recycling plant project, and life cycle costing (LCC) is applied to evaluate its economic impact. Firms, also understanding the relevance of GSCM, have often avoided applying the green principles because of the elevated costs that such management involved. Such costs could also seem superior to the potential advantages since standard performance measurement systems are internally and business focused; for these reasons, we consider all the possible value deriving also by uncertainty associated to a green project using the RO theory. This work is one of the few and pioneering efforts to investigate GSCM practices in the battery recycling sector.

Balancing detail and scale in assessing transparency to improve the governance of agricultural commodity supply chains

NASA Astrophysics Data System (ADS)

Godar, Javier; Suavet, Clément; Gardner, Toby A.; Dawkins, Elena; Meyfroidt, Patrick

2016-03-01

To date, assessments of the sustainability of agricultural commodity supply chains have largely relied on some combination of macro-scale footprint accounts, detailed life-cycle analyses and fine-scale traceability systems. Yet these approaches are limited in their ability to support the sustainability governance of agricultural supply chains, whether because they are intended for coarser-grained analyses, do not identify individual actors, or are too costly to be implemented in a consistent manner for an entire region of production. Here we illustrate some of the advantages of a complementary middle-ground approach that balances detail and scale of supply chain transparency information by combining consistent country-wide data on commodity production at the sub-national (e.g. municipal) level with per shipment customs data to describe trade flows of a given commodity covering all companies and production regions within that country. This approach can support supply chain governance in two key ways. First, enhanced spatial resolution of the production regions that connect to individual supply chains allows for a more accurate consideration of geographic variability in measures of risk and performance that are associated with different production practices. Second, identification of key actors that operate within a specific supply chain, including producers, traders, shippers and consumers can help discriminate coalitions of actors that have shared stake in a particular region, and that together are capable of delivering more cost-effective and coordinated interventions. We illustrate the potential of this approach with examples from Brazil, Indonesia and Colombia. We discuss how transparency information can deepen understanding of the environmental and social impacts of commodity production systems, how benefits are distributed among actors, and some of the trade-offs involved in efforts to improve supply chain sustainability. We then discuss the challenges and opportunities of our approach to strengthen supply chain governance and leverage more effective and fair accountability systems.

6. September 1971 DETAIL VIEW OF CHAIN PADLOCK AND KEY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. September 1971 DETAIL VIEW OF CHAIN PADLOCK AND KEY TO SECURE DOOR TO MAIN CELL BLOCK, NOTE STANDARD MODERN PADLOCK FOR SIZE COMPARISON - Jefferson County Jail & Sheriff's Office, Courthouse Square, Madison, Jefferson County, IN

Polymer chain alignment and transistor properties of nanochannel-templated poly(3-hexylthiophene) nanowires

NASA Astrophysics Data System (ADS)

Oh, Seungjun; Hayakawa, Ryoma; Pan, Chengjun; Sugiyasu, Kazunori; Wakayama, Yutaka

2016-08-01

Nanowires of semiconducting poly(3-hexylthiophene) (P3HT) were produced by a nanochannel-template technique. Polymer chain alignment in P3HT nanowires was investigated as a function of nanochannel widths (W) and polymer chain lengths (L). We found that the ratio between chain length and channel width (L/W) was a key parameter as regards promoting polymer chain alignment. Clear dichroism was observed in polarized ultraviolet-visible (UV-Vis) absorption spectra only at a ratio of approximately L/W = 2, indicating that the L/W ratio must be optimized to achieve uniaxial chain alignment in the nanochannel direction. We speculate that an appropriate L/W ratio is effective in confining the geometries and conformations of polymer chains. This discussion was supported by theoretical simulations based on molecular dynamics. That is, the geometry of the polymer chains, including the distance and tilting angles of the chains in relation to the nanochannel surface, was dominant in determining the longitudinal alignment along the nanochannels. Thus prepared highly aligned polymer nanowire is advantageous for electrical carrier transport and has great potential for improving the device performance of field-effect transistors. In fact, a one-order improvement in carrier mobility was observed in a P3HT nanowire transistor.

Some Effects of Procedural Variations on Choice Responding in Concurrent Chains

ERIC Educational Resources Information Center

Moore, J.

2009-01-01

The present research used pigeons in a three-key operant chamber and varied procedural features pertaining to both initial and terminal links of concurrent chains. The initial links randomly alternated on the side keys during a session, while the terminal links always appeared on the center key. Both equal and unequal initial-link schedules were…

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective

PubMed Central

Su, Shong-Iee Ivan

2017-01-01

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global warming effect. Several subsidy policies such as shared solar energy arrangements and performance-based incentive (PBI) are proposed to integrate the market users and the PV supply chains. This study serves as a pioneering study into the dual PV supply chain research which is very limited in the PV management and policy study literature. The findings and several untended issues provide a foundation for the future PV supply chain studies. PMID:29156653

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective.

PubMed

Chen, Zhisong; Su, Shong-Iee Ivan

2017-11-20

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global warming effect. Several subsidy policies such as shared solar energy arrangements and performance-based incentive (PBI) are proposed to integrate the market users and the PV supply chains. This study serves as a pioneering study into the dual PV supply chain research which is very limited in the PV management and policy study literature. The findings and several untended issues provide a foundation for the future PV supply chain studies.

The "Organization" as an Interdisciplinary Learning Zone: Using a Strategic Game to Integrate Learning about Supply Chain Management and Advertising

ERIC Educational Resources Information Center

Arora, Anshu Saxena

2012-01-01

Purpose: The research study seeks to explore the relationship among strategic gaming, the learning organization model and approach, and transfer of learning as key success strategies for improved individual and organizational performance and sustainable competitive advantage. This research aims to identify and elaborate on the strategic…

Measuring the environmental sustainability performance of global supply chains: A multi-regional input-output analysis for carbon, sulphur oxide and water footprints.

PubMed

Acquaye, Adolf; Feng, Kuishuang; Oppon, Eunice; Salhi, Said; Ibn-Mohammed, Taofeeq; Genovese, Andrea; Hubacek, Klaus

2017-02-01

Measuring the performance of environmentally sustainable supply chains instead of chain constitute has become a challenge despite the convergence of the underlining principles of sustainable supply chain management. This challenge is exacerbated by the fact that supply chains are inherently dynamic and complex and also because multiple measures can be used to characterize performances. By identifying some of the critical issues in the literature regarding performance measurements, this paper contributes to the existing body of literature by adopting an environmental performance measurement approach for economic sectors. It uses economic sectors and evaluates them on a sectoral level in specific countries as well as part of the Global Value Chain based on the established multi-regional input-output (MRIO) modeling framework. The MRIO model has been used to calculate direct and indirect (that is supply chain or upstream) environmental effects such as CO 2 , SO 2 , biodiversity, water consumption and pollution to name just a few of the applications. In this paper we use MRIO analysis to calculate emissions and resource consumption intensities and footprints, direct and indirect impacts, and net emission flows between countries. These are exemplified by using carbon emissions, sulphur oxide emissions and water use in two highly polluting industries; Electricity production and Chemical industry in 33 countries, including the EU-27, Brazil, India and China, the USA, Canada and Japan from 1995 to 2009. Some of the highlights include: On average, direct carbon emissions in the electricity sector across all 27 member states of the EU was estimated to be 1368 million tons and indirect carbon emissions to be 470.7 million tons per year representing 25.6% of the EU-27 total carbon emissions related to this sector. It was also observed that from 2004, sulphur oxide emissions intensities in electricity production in India and China have remained relatively constant at about 62.8 gSO x /, respectively, $ and 84.4 gSO x /$ although being higher than in other countries. In terms of water use, the high water use intensity in China (1040.27 L/$) and India (961.63 L/$), which are among the highest in the sector in the electricity sector is exacerbated by both countries being ranked as High Water Stress Risk countries. The paper also highlights many advantages of the MRIO approach including: a 15-year time series study (which provides a measurement of environmental performance of key industries and an opportunity to assess technical and technological change during the investigated time period), a supply chain approach that provides a consistent methodological framework and accounts for all upstream supply chain environmental impacts throughout entire global supply chains. The paper also discusses the implications of the study to environmental sustainability performance measurement in terms of the level of analysis from a value chain hierarchy perspective, methodological issues, performance indicators, environmental exchanges and policy relevance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Leading a supply chain turnaround.

PubMed

Slone, Reuben E

2004-10-01

Just five years ago, salespeople at Whirlpool were in the habit of referring to their supply chain organization as the "sales disablers." Now the company excels at getting products to the right place at the right time--while managing to keep inventories low. How did that happen? In this first-person account, Reuben Slone, Whirlpool's vice president of Global Supply Chain, describes how he and his colleagues devised the right supply chain strategy, sold it internally, and implemented it. Slone insisted that the right focal point for the strategy was the satisfaction of consumers at the end of the supply chain. Most supply chain initiatives do the opposite: They start with the realities of a company's manufacturing base and proceed from there. Through a series of interviews with trade customers large and small, his team identified 27 different capabilities that drove industry perceptions of Whirlpool's performance. Knowing it was infeasible to aim for world-class performance across all of them, Slone weighed the costs of excelling at each and found the combination of initiatives that would provide overall competitive advantage. A highly disciplined project management office and broad training in project management were key to keeping work on budget and on benefit. Slone set an intense pace--three "releases" of new capabilities every month--that the group maintains to this day. Lest this seem like a technology story, however, Slone insists it is just as much a "talent renaissance." People are proud today to be part of Whirlpool's supply chain organization, and its new generation of talent will give the company a competitive advantage for years to come.

Foreign Languages: Key Links in the Chain of Learning.

ERIC Educational Resources Information Center

Mead, Robert G., Jr., Ed.

The articles discuss the necessity of including foreign language as an integral part of the curriculum at all levels of instruction. The following chapters are included: "Elementary School Foreign Language: Key Link in the Chain of Learning" (rationale, innovations, immersion programs, and interdisciplinary approaches); "Foreign…

MEDEA+ project 2T302 MUSCLE: masks through user's supply chain: leadership by excellence

NASA Astrophysics Data System (ADS)

Torsy, Andreas

2008-04-01

The rapid evolution of our information society depends on the continuous developments and innovations of semiconductor products. The cost per chip functionality keeps reducing by a factor of 2 every 18 month. However, this performance and success of the semiconductor industry critically depends on the quality of the lithographic photomasks. The need for the high quality of photomask drives lithography costs sensitively, which is a key factor in the manufacture of microelectronics devices. Therefore, the aim is to reduce production costs while overcoming challenges in terms of feature sizes, complexity and cycle times. Consequently, lithography processes must provide highest possible quality at reasonable prices. This way, the leadership in the lithographic area can be maintained and European chipmakers can stay competitive with manufacturers in the Far East and the USA. Under the umbrella of MEDEA+, a project called MUSCLE (<< Masks through User's Supply Chain: Leadership by Excellence >>) has been started among leading semiconductor companies in Europe: ALTIS Semiconductor (Project Leader), ALCATEL Vacuum, ATMEL, CEA/LETI, Entegris, NXP Semiconductors, TOPPAN Photomasks, AMTC, Carl ZEISS SMS, DMS, Infineon Technologies, VISTEC Semiconductor, NIKON Precision, SCHOTT Lithotec, ASML, PHOTRONICS, IMEC, DCE, DNP Photomask, STMicroelectronics, XYALIS and iCADA. MUSCLE focuses particularly on mask data flow, photomask carrier, photomask defect characterization and photomask data handling. In this paper, we will discuss potential solutions like standardization and automation of the photomask data flow based on SEMI P10, the performance and the impact of the supply chain parameter within the photomask process, the standardization of photomask defect characterization and a discussion of the impact of new Reticle Enhancement Technologies (RET) such as mask process correction and finally a generic model to describe the photomasks key performance indicators for prototype photomasks.

Health supply chain management.

PubMed

Zimmerman, Rolf; Gallagher, Pat

2010-01-01

This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.

Research of Trust Chain of Operating System

NASA Astrophysics Data System (ADS)

Li, Hongjiao; Tian, Xiuxia

Trust chain is one of the key technologies in designing secure operating system based on TC technology. Constructions of trust chain and trust models are analyzed. Future works in these directions are discussed.

Outsourcing vaccine logistics to the private sector: The evidence and lessons learned from the Western Cape Province in South-Africa.

PubMed

Lydon, Patrick; Raubenheimer, Ticky; Arnot-Krüger, Michelle; Zaffran, Michel

2015-06-26

With few exceptions, immunization supply chains in developing countries continue to face chronic difficulties in providing uninterrupted availability of potent vaccines up to service delivery levels, and in the most efficient manner possible. As these countries struggle to keep pace with an ever growing number of vaccines, more and more Ministries of Health are considering options of engaging the private sector to manage vaccine storage, handling and distribution on their behalf. Despite this emerging trend, there is limited evidence on the benefits or challenges of this option to improve public supply chain performance for national immunization programmes. To bridge this knowledge gap, this study aims to shed light on the value proposition of outsourcing by documenting the specific experience of the Western Cape Province of South Africa. The methodology for this review rested on conducting two key supply chain assessments which allowed juxtaposing the performance of the government managed segments of the vaccine supply chain against those managed by the private sector. In particular, measures of effective vaccine management best practice and temperature control in the cold chain were analysed. In addition, the costs of engaging the private sector were analysed to get a better understanding of the economics underpinning outsourcing vaccine logistics. The results from this analysis confirmed some of the theoretical benefits of outsourcing to the private sector. Yet, if the experience in the Western Cape can be deemed a successful one, there are several policy and practice implications that developing countries should be mindful of when considering engaging the private sector. While outsourcing can help improve the performance of the vaccine supply chain, it has the potential to do the reverse if done incorrectly. The findings and lessons learnt from the Western Cape experience can serve as a step towards understanding the role of the private sector in immunization supply chain and logistics systems for developing countries. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Ferritin light-chain subunits: key elements for the electron transfer across the protein cage.

PubMed

Carmona, Unai; Li, Le; Zhang, Lianbing; Knez, Mato

2014-12-18

The first specific functionality of the light-chain (L-chain) subunit of the universal iron storage protein ferritin was identified. The electrons released during iron-oxidation were transported across the ferritin cage specifically through the L-chains and the inverted electron transport through the L-chains also accelerated the demineralization of ferritin.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening.

PubMed

Windisch, Ricarda; Waiswa, Peter; Neuhann, Florian; Scheibe, Florian; de Savigny, Don

2011-08-01

Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance.

Characterization of Interactions between Heparin/Glycosaminoglycan and Adeno-associated Virus

PubMed Central

Zhang, Fuming; Aguilera, Javier; Beaudet, Julie M.; Xie, Qing; Lerch, Thomas F.; Davulcu, Omar; Colón, Wilfredo; Chapman, Michael S.; Linhardt, Robert J.

2013-01-01

Adeno-associated virus (AAV) is a key candidate in the development of gene therapy. In this report, we used surface plasmon resonance spectroscopy to study the interaction between AAV and heparin and other glycosaminoglycans. Surface plasmon resonance results revealed that heparin binds to AAV with extremely high affinity. Solution competition studies shows that AAV binding to heparin is chain length dependent. AAV prefers to bind full chain heparin. All sulfo groups (especially N-sulfo and 6-O-sulfo groups) on heparin are important for the AAV- heparin interaction. Higher levels of sulfo group substitution in GAGs enhance their binding affinities. Atomic force microscopy was also performed to image AAV-2 complexed with heparin. PMID:23952613

Simulating the performance of a distance-3 surface code in a linear ion trap

NASA Astrophysics Data System (ADS)

Trout, Colin J.; Li, Muyuan; Gutiérrez, Mauricio; Wu, Yukai; Wang, Sheng-Tao; Duan, Luming; Brown, Kenneth R.

2018-04-01

We explore the feasibility of implementing a small surface code with 9 data qubits and 8 ancilla qubits, commonly referred to as surface-17, using a linear chain of 171Yb+ ions. Two-qubit gates can be performed between any two ions in the chain with gate time increasing linearly with ion distance. Measurement of the ion state by fluorescence requires that the ancilla qubits be physically separated from the data qubits to avoid errors on the data due to scattered photons. We minimize the time required to measure one round of stabilizers by optimizing the mapping of the two-dimensional surface code to the linear chain of ions. We develop a physically motivated Pauli error model that allows for fast simulation and captures the key sources of noise in an ion trap quantum computer including gate imperfections and ion heating. Our simulations showed a consistent requirement of a two-qubit gate fidelity of ≥99.9% for the logical memory to have a better fidelity than physical two-qubit operations. Finally, we perform an analysis of the error subsets from the importance sampling method used to bound the logical error rates to gain insight into which error sources are particularly detrimental to error correction.

Decision and coordination of low-carbon supply chain considering technological spillover and environmental awareness.

PubMed

Xu, Lang; Wang, Chuanxu; Li, Hui

2017-06-08

We focus on the impacts of technological spillovers and environmental awareness in a two-echelon supply chain with one-single supplier and one-single manufacturer to reduce carbon emission. In this supply chain, carbon abatement investment becomes one of key factors of cutting costs and improving profits, which is reducing production costs in the components and products-the investment from players in supply chain. On the basis of optimality theory, the centralized and decentralized models are respectively established to investigate the optimal decisions and profits. Further, setting the players' profits of the decentralized scenario as the disagreement points, we propose a bargaining-coordination contract through revenue-cost sharing to enhance the performance. Finally, by theoretical comparison and numerical analysis, the results show that: (i) The optimal profits of players and supply chain improve as technological spillovers and environmental awareness increase, and the profits of them in the bargaining-coordination contract are higher than that in the decentralized scenario; (ii) Technological spillovers between the players amplify the impact of "free-ride" behavior, in which the supplier always incentives the manufacturer to improve carbon emission intensity, but the cooperation will achieves and the profits will improve only when technological spillovers and environmental awareness are great; (iii) The contract can effectively achieve coordinated supply chain, and improve carbon abatement investment.

Rate-loss analysis of an efficient quantum repeater architecture

NASA Astrophysics Data System (ADS)

Guha, Saikat; Krovi, Hari; Fuchs, Christopher A.; Dutton, Zachary; Slater, Joshua A.; Simon, Christoph; Tittel, Wolfgang

2015-08-01

We analyze an entanglement-based quantum key distribution (QKD) architecture that uses a linear chain of quantum repeaters employing photon-pair sources, spectral-multiplexing, linear-optic Bell-state measurements, multimode quantum memories, and classical-only error correction. Assuming perfect sources, we find an exact expression for the secret-key rate, and an analytical description of how errors propagate through the repeater chain, as a function of various loss-and-noise parameters of the devices. We show via an explicit analytical calculation, which separately addresses the effects of the principle nonidealities, that this scheme achieves a secret-key rate that surpasses the Takeoka-Guha-Wilde bound—a recently found fundamental limit to the rate-vs-loss scaling achievable by any QKD protocol over a direct optical link—thereby providing one of the first rigorous proofs of the efficacy of a repeater protocol. We explicitly calculate the end-to-end shared noisy quantum state generated by the repeater chain, which could be useful for analyzing the performance of other non-QKD quantum protocols that require establishing long-distance entanglement. We evaluate that shared state's fidelity and the achievable entanglement-distillation rate, as a function of the number of repeater nodes, total range, and various loss-and-noise parameters of the system. We extend our theoretical analysis to encompass sources with nonzero two-pair-emission probability, using an efficient exact numerical evaluation of the quantum state propagation and measurements. We expect our results to spur formal rate-loss analysis of other repeater protocols and also to provide useful abstractions to seed analyses of quantum networks of complex topologies.

Pathophysiologic roles of the fibrinogen gamma chain.

PubMed

Farrell, David H

2004-05-01

Fibrinogen binds through its gamma chains to cell surface receptors, growth factors, and coagulation factors to perform its key roles in fibrin clot formation, platelet aggregation, and wound healing. However, these binding interactions can also contribute to pathophysiologic processes, including inflammation and thrombosis. This review summarizes the latest findings on the role of the fibrinogen gamma chain in these processes, and illustrates the potential for therapeutic intervention. Novel gamma chain epitopes that bind platelet integrin alpha IIbbeta3 and leukocyte integrin alphaMbeta2 have been characterized, leading to the revision of former dogma regarding the processes of platelet aggregation, clot retraction, inflammation, and thrombosis. A series of studies has shown that the gamma chain serves as a depot for fibroblast growth factor-2 (FGF-2), which is likely to play an important role in wound healing. Inhibition of gamma chain function with the monoclonal antibody 7E9 has been shown to interfere with multiple fibrinogen activities, including factor XIIIa crosslinking, platelet adhesion, and platelet-mediated clot retraction. The role of the enigmatic variant fibrinogen gamma chain has also become clearer. Studies have shown that gamma chain binding to thrombin and factor XIII results in clots that are mechanically stiffer and resistant to fibrinolysis, which may explain the association between gammaA/gamma' fibrinogen levels and cardiovascular disease. The identification of new interactions with gamma chains has revealed novel targets for the treatment of inflammation and thrombosis. In addition, several exciting studies have shown new functions for the variant gamma chain that may contribute to cardiovascular disease.

Role of monomer sequence and backbone chemistry in polypeptoid copolymers for marine antifouling coatings

NASA Astrophysics Data System (ADS)

Patterson, Anastasia; Wenning, Brandon; Rizis, Georgios; Calabrese, David; Finlay, John; Franco, Sofia; Clare, Anthony; Kramer, Edward; Ober, Christopher; Segalman, Rachel

The design rules elucidated in this work suggest that antifouling coatings bearing pendant peptoid side chains perform better overall in marine fouling tests than those with peptide side chains, with extremely low attachment of N. incerta and high removal of U. linza. This difference in performance is likely due to the lack of a hydrogen bond donor in the peptoid backbone. Furthermore, we show that the bulk polymer material of these hierarchical coatings (based on PEO or PDMS) plays a key role in determining both surface presentation and fouling release performance. We demonstrate these trends utilizing a modular coating based on a triblock copolymer consisting of polystyrene and a vinyl-containing midblock, to which sequence-defined pendant oligomers (peptides or peptoids with sequences of oligo-PEO and fluoroalkyl groups) are attached via thiol-ene ``click'' chemistry. Surface presentation was analyzed with X-ray photoelectron spectroscopy and captive bubble water contact angle, and antifouling performance was evaluated with attachment and removal bioassays of the marine macroalga U. linza and diatom N. incerta. NSF GRFP and ONR PECASE.

The Relationship Between Key Supply Chain Management Process Implementation, Competitive Advantage and Organizational Performance

DTIC Science & Technology

2012-03-01

with inputs from 3M; CEMEX; The Coca - Cola Company; CSX Corporation; Fletcher-Challenge; Goodyear Tire and Rubber Company; Hewlett-Packard Company...customer or market ” (Lambert, Cooper, & Pagh, 1998). In general, the strategic sub- processes comprise the actions and decisions related to...silos such as marketing , research and development, finance, production and purchasing and logistics (Croxton, Garcia-Dastugue, Lambert, and Rogers

Coupled ecosystem/supply chain modelling of fish products from sea to shelf: the Peruvian anchoveta case.

PubMed

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities.

Coupled Ecosystem/Supply Chain Modelling of Fish Products from Sea to Shelf: The Peruvian Anchoveta Case

PubMed Central

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities. PMID:25003196

An affine microsphere approach to modeling strain-induced crystallization in rubbery polymers

NASA Astrophysics Data System (ADS)

Nateghi, A.; Dal, H.; Keip, M.-A.; Miehe, C.

2018-01-01

Upon stretching a natural rubber sample, polymer chains orient themselves in the direction of the applied load and form crystalline regions. When the sample is retracted, the original amorphous state of the network is restored. Due to crystallization, properties of rubber change considerably. The reinforcing effect of the crystallites stiffens the rubber and increases the crack growth resistance. It is of great importance to understand the mechanism leading to strain-induced crystallization. However, limited theoretical work has been done on the investigation of the associated kinetics. A key characteristic observed in the stress-strain diagram of crystallizing rubber is the hysteresis, which is entirely attributed to strain-induced crystallization. In this work, we propose a micromechanically motivated material model for strain-induced crystallization in rubbers. Our point of departure is constructing a micromechanical model for a single crystallizing polymer chain. Subsequently, a thermodynamically consistent evolution law describing the kinetics of crystallization on the chain level is proposed. This chain model is then incorporated into the affine microsphere model. Finally, the model is numerically implemented and its performance is compared to experimental data.

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

PubMed Central

Indrawan, Dikky; Rich, Karl M.; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper understanding of the chain governance structure is vital to improve the effectiveness of HPAI control measures, by making the interventions more specific and fit-for-purpose given the incentive structures present in different chains. PMID:29770325

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective.

PubMed

Indrawan, Dikky; Rich, Karl M; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper understanding of the chain governance structure is vital to improve the effectiveness of HPAI control measures, by making the interventions more specific and fit-for-purpose given the incentive structures present in different chains.

Winners and losers in the complex web of global supply chains.

PubMed

Glendon, Lee

2013-01-01

This paper discusses how supply chain, risk and business continuity professionals can collaboratively address the consequences of increasing supply chain complexity in order to deliver both resilient and sustainable supply chains. The paper identifies the key drivers of complexity supported by recent case examples, including the equine DNA scandal and the Rana Plaza tragedy in Bangladesh.

U.S. Offshore Wind Manufacturing and Supply Chain Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, Bruce

2013-02-22

This report seeks to provide an organized, analytical approach to identifying and bounding uncertainties around offshore wind manufacturing and supply chain capabilities; projecting potential component-level supply chain needs under three demand scenarios; and identifying key supply chain challenges and opportunities facing the future U.S. market and current suppliers of the nation’s landbased wind market.

Development of S-ARIMA Model for Forecasting Demand in a Beverage Supply Chain

NASA Astrophysics Data System (ADS)

Mircetic, Dejan; Nikolicic, Svetlana; Maslaric, Marinko; Ralevic, Nebojsa; Debelic, Borna

2016-11-01

Demand forecasting is one of the key activities in planning the freight flows in supply chains, and accordingly it is essential for planning and scheduling of logistic activities within observed supply chain. Accurate demand forecasting models directly influence the decrease of logistics costs, since they provide an assessment of customer demand. Customer demand is a key component for planning all logistic processes in supply chain, and therefore determining levels of customer demand is of great interest for supply chain managers. In this paper we deal with exactly this kind of problem, and we develop the seasonal Autoregressive IntegratedMoving Average (SARIMA) model for forecasting demand patterns of a major product of an observed beverage company. The model is easy to understand, flexible to use and appropriate for assisting the expert in decision making process about consumer demand in particular periods.

Achieving mask order processing automation, interoperability and standardization based on P10

NASA Astrophysics Data System (ADS)

Rodriguez, B.; Filies, O.; Sadran, D.; Tissier, Michel; Albin, D.; Stavroulakis, S.; Voyiatzis, E.

2007-02-01

Last year the MUSCLE (Masks through User's Supply Chain: Leadership by Excellence) project was presented. Here is the project advancement. A key process in mask supply chain management is the exchange of technical information for ordering masks. This process is large, complex, company specific and error prone, and leads to longer cycle times and higher costs due to missing or wrong inputs. Its automation and standardization could produce significant benefits. We need to agree on the standard for mandatory and optional parameters, and also a common way to describe parameters when ordering. A system was created to improve the performance in terms of Key Performance Indicators (KPIs) such as cycle time and cost of production. This tool allows us to evaluate and measure the effect of factors, as well as the effect of implementing the improvements of the complete project. Next, a benchmark study and a gap analysis were performed. These studies show the feasibility of standardization, as there is a large overlap in requirements. We see that the SEMI P10 standard needs enhancements. A format supporting the standard is required, and XML offers the ability to describe P10 in a flexible way. Beyond using XML for P10, the semantics of the mask order should also be addressed. A system design and requirements for a reference implementation for a P10 based management system are presented, covering a mechanism for the evolution and for version management and a design for P10 editing and data validation.

Improved performance in CAPRI round 37 using LZerD docking and template-based modeling with combined scoring functions.

PubMed

Peterson, Lenna X; Shin, Woong-Hee; Kim, Hyungrae; Kihara, Daisuke

2018-03-01

We report our group's performance for protein-protein complex structure prediction and scoring in Round 37 of the Critical Assessment of PRediction of Interactions (CAPRI), an objective assessment of protein-protein complex modeling. We demonstrated noticeable improvement in both prediction and scoring compared to previous rounds of CAPRI, with our human predictor group near the top of the rankings and our server scorer group at the top. This is the first time in CAPRI that a server has been the top scorer group. To predict protein-protein complex structures, we used both multi-chain template-based modeling (TBM) and our protein-protein docking program, LZerD. LZerD represents protein surfaces using 3D Zernike descriptors (3DZD), which are based on a mathematical series expansion of a 3D function. Because 3DZD are a soft representation of the protein surface, LZerD is tolerant to small conformational changes, making it well suited to docking unbound and TBM structures. The key to our improved performance in CAPRI Round 37 was to combine multi-chain TBM and docking. As opposed to our previous strategy of performing docking for all target complexes, we used TBM when multi-chain templates were available and docking otherwise. We also describe the combination of multiple scoring functions used by our server scorer group, which achieved the top rank for the scorer phase. © 2017 Wiley Periodicals, Inc.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening

PubMed Central

2011-01-01

Background Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. Methods This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Results Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. Conclusion The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance. PMID:21806826

Molecular engineering of polymer actuators for biomedical and industrial use

NASA Astrophysics Data System (ADS)

Banister, Mark; Eichorst, Rebecca; Gurr, Amy; Schweitzer, Georgette; Geronov, Yordan; Rao, Pavalli; McGrath, Dominic

2012-04-01

Five key materials engineering components and how each component impacted the working performance of a polymer actuator material are investigated. In our research we investigated the change of actuation performance that occurred with each change we made to the material. We investigated polymer crosslink density, polymer chain length, polymer gelation, type and density of reactive units, as well as the addition of binders to the polymer matrix. All five play a significant role and need to be addressed at the molecular level to optimize a polymer gel for use as a practical actuator material for biomedical and industrial use.

Design and synthesis study of the thermo-sensitive poly (N-vinylpyrrolidone-b- N, N-diethylacrylamide).

PubMed

Zhang, Xiayun; Yang, Zhongduo; Xie, Dengmin; Liu, Donglei; Chen, Zhenbin; Li, Ke; Li, Zhizhong; Tichnell, Brandon; Liu, Zhen

2018-01-01

The reversible addition fragmentation chain transfer (RAFT) polymerization method was adopted here to prepare a series of thermo-sensitive copolymers, poly (N,N-diethyl- acrylamide-b-N-vinylpyrrolidone). Their structures, molecular weight distribution and temperature sensitivity performances were characterized by the nuclear magnetic resonance ( 1 HNMR), the gel permeation chromatography (GPC) and the fluorescence spectrophotometer, respectively. It has been identified that the synthesis reaction of the block copolymer was living polymerization. The thermo-sensitivity study suggested that N-vinylpyrrolidone (NVP), played a key role on the lower critical solution temperature (LCST) performance.

Design of N-acyl homoserine lactonase with high substrate specificity by a rational approach.

PubMed

Kyeong, Hyun-Ho; Kim, Jin-Hyun; Kim, Hak-Sung

2015-06-01

N-Acyl homoserine lactone (AHL) is a major quorum-sensing signaling molecule in many bacterial species. Quorum-quenching (QQ) enzymes, which degrade such signaling molecules, have attracted much attention as an approach to controlling and preventing bacterial virulence and pathogenesis. However, naturally occurring QQ enzymes show a broad substrate spectrum, raising the concern of unintentionally attenuating beneficial effects by symbiotic bacteria. Here we report the rational design of acyl homoserine lactonase with high substrate specificity. Through docking analysis, we identified three key residues which play a key role in the substrate preference of the enzyme. The key residues were changed in a way that increases hydrophobic contact with a substrate having a short acyl chain (C4-AHL) while generating steric clashes with that containing a long acyl chain (C12-AHL). The resulting mutants exhibited a significantly shifted preference toward a substrate with a short acyl chain. Molecular dynamics simulations suggested that the mutations affect the behavior of a flexible loop, allowing tighter binding of a substrate with a short acyl chain.

Making products available among community health workers: Evidence for improving community health supply chains from Ethiopia, Malawi, and Rwanda

PubMed Central

Chandani, Yasmin; Andersson, Sarah; Heaton, Alexis; Noel, Megan; Shieshia, Mildred; Mwirotsi, Amanda; Krudwig, Kirstin; Nsona, Humphreys; Felling, Barbara

2014-01-01

Background A UNICEF review of the challenges to scaling up integrated community case management (iCCM) found that drug shortages were a common bottleneck. In many settings, little thought has gone into the design of supply chains to the community level and limited evidence exists for how to address these unique challenges. SC4CCM’s purpose was to conduct intervention research to identify proven, simple, affordable solutions that address the unique supply chain challenges faced by CHWs and to demonstrate that supply chain constraints at the community level can be overcome. Methods SC4CCM selected three countries to implement supply chain innovations and developed a theory of change (TOC) framework for the learning phase, which identified the main drivers of product availability and was used for baseline assessments, design, implementation and evaluation of interventions in Ethiopia, Malawi, and Rwanda. Interventions were developed in each country and tested over 12–24 months. Mixed–method follow up assessments were conducted in each country in 2012–2013. The Supply Chain for Community Case Management (SC4CCM) Project then simplified the TOC into a Community Health Supply Chain (CHSC) framework to enable cross country analysis Results The findings from interventions in the three countries suggest that the greatest supply chain benefits are realized when all three CHSC framework elements (data flow, product flow, and effective people) are in place and working together. The synergistic effect of these three elements on supply chain performance was most effectively demonstrated by results from the Enhanced Management and Quality Collaborative interventions in Malawi and Rwanda, respectively, which were characterized by lower mean stockout rates and higher in stock rates on day of visit, when compared to other interventions. Conclusions Many conditions are necessary to ensure continuous product availability at the community level, however a supply chain works best when three key elements (product flow, data flow, and effective people) are deliberately included as an integral part of the system design. Although these elements may be designed differently in different settings, streamlining and synchronizing them while ensuring inclusion of all components for each element improves supply chain performance and promotes product availability at the community level. PMID:25520795

Antiretroviral procurement and supply chain management.

PubMed

Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

2014-01-01

Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

Critical Research Needed to Examine the Environmental Impacts of Expanded Refrigeration on the Food System.

PubMed

Heard, Brent R; Miller, Shelie A

2016-11-15

The unbroken global refrigerated supply chain, or cold chain, is rapidly expanding in developing countries. In addition to increasing the energy intensity of the food system, the expanded cold chain may facilitate changes in the global diet, food waste patterns, food production and distribution, and shopping habits. The sustainability impacts of many of these changes chain are unknown, given the complexity of interacting social, economic, and technical factors. The current literature surrounding the environmental impacts of refrigeration in the food system focuses on the direct impacts of energy use and coolant emissions, and lacks a critical evaluation of the accompanying systemic societal changes that potentially carry greater environmental impacts. This review examines the cold chain as a transformative technology, identifying key intrinsic, indirect, and external factors that will favorably, unfavorably, or ambiguously impact the environmental profile of the food system. The review identifies key interactions and feedbacks between the cold chain, food production and consumption decisions, infrastructure development, and the global environment which are largely unexamined and in need of empirical data. Viewing cold chain expansion from this broader perspective is essential to understanding the changing impacts of the food system in developing countries and may inform future sustainability planning.

Determining the optimal number of Kanban in multi-products supply chain system

NASA Astrophysics Data System (ADS)

Widyadana, G. A.; Wee, H. M.; Chang, Jer-Yuan

2010-02-01

Kanban, a key element of just-in-time system, is a re-order card or signboard giving instruction or triggering the pull system to manufacture or supply a component based on actual usage of material. There are two types of Kanban: production Kanban and withdrawal Kanban. This study uses optimal and meta-heuristic methods to determine the Kanban quantity and withdrawal lot sizes in a supply chain system. Although the mix integer programming method gives an optimal solution, it is not time efficient. For this reason, the meta-heuristic methods are suggested. In this study, a genetic algorithm (GA) and a hybrid of genetic algorithm and simulated annealing (GASA) are used. The study compares the performance of GA and GASA with that of the optimal method using MIP. The given problems show that both GA and GASA result in a near optimal solution, and they outdo the optimal method in term of run time. In addition, the GASA heuristic method gives a better performance than the GA heuristic method.

DNA ELECTROPHORESIS AT SURFACES

DOE Office of Scientific and Technical Information (OSTI.GOV)

RAFAILOVICH, MIRIAM; SOKOLOV, JONATHAN; GERSAPPE, DILIP

2003-09-01

During this year we performed two major projects: I. We developed a detailed theoretical model which complements our experiments on surface DNA electrophoresis. We found that it was possible to enhance the separation of DNA chains by imposing a chemical nanoscale pattern on the surface. This approach utilized the surface interaction effect of the DNA chains with the substrate and is a refinement to our previous method in which DNA chains were separated on homogeneous flat surfaces. By introducing the nano-patterns on the surface, the conformational changes of DNA chains of different lengths can be amplified, which results in themore » different friction strengths with the substrate surface. Our results also show that, when compared to the DNA electrophoresis performed on homogeneous flat surfaces, nanopatterned surfaces offer a larger window in choosing different surface interactions to achieve separation. II. In collaboration with a large international manufacturer of skin care products we also embarked on a project involving photo toxicity of titanium dioxide nanoparticles, which are a key ingredient in sunscreen and cosmetic lotions. The results clearly implicated the nanoparticles in catalyzing damage to chromosomal DNA. We then used this knowledge to develop a polymer/anti-oxidant coating which prevented the photocatalytic reaction on DNA while still retaining the UV absorptive properties of the nanoparticles. The standard gel electrophoresis was not sufficient in determining the extent of the DNA damage. The conclusions of this study were based predominantly on analysis obtained with the surface electrophoresis method.« less

Assessing "First Mile" Supply Chain Factors Affecting Timeliness of School-Based Deworming Interventions: Supply and Logistics Performance Indicators.

PubMed

Koporc, Kimberly M; Strunz, Eric; Holloway, Cassandra; Addiss, David G; Lin, William

2015-12-01

Between 2007 and 2012, Children Without Worms (CWW) oversaw the Johnson & Johnson (J&J) donation of Vermox (mebendazole) for treatment of school-age children to control soil-transmitted helminthiasis (STH). To identify factors associated with on-time, delayed, or missed mass drug administration (MDA) interventions, and explore possible indicators for supply chain performance for drug donation programs, we reviewed program data for the 14 STH-endemic countries CWW supported during 2007-2012. Data from drug applications, shipping records, and annual treatment reports were tracked using Microsoft Excel. Qualitative data from interviews with key personnel were used to provide additional context on the causes of delayed or missed MDAs. Four possible contributory factors to delayed or missed MDAs were considered: production, shipping, customs clearance, and miscellaneous in-country issues. Coverage rates were calculated by dividing the number of treatments administered by the number of children targeted during the MDA. Of the approved requests for 78 MDAs, 54 MDAs (69%) were successfully implemented during or before the scheduled month. Ten MDAs (13%) were classified as delayed; seven of these were delayed by one month or less. An additional 14 MDAs (18%) were classified as missed. For the 64 on-time or delayed MDAs, the mean coverage was approximately 88%. To continue to assess the supply chain processes and identify areas for improvement, we identified four indicators or metrics for supply chain performance that can be applied across all neglected tropical disease (NTD) drug donation programs: (1) donor having available inventory to satisfy the country request for donation; (2) donor shipping the approved number of doses; (3) shipment arriving at the Central Medical Stores one month in advance of the scheduled MDA date; and (4) country programs implementing the MDA as scheduled.

Key volatile compounds in red koji-shochu, a Monascus-fermented product, and their formation steps during fermentation.

PubMed

Rahayu, Yen Yen Sally; Yoshizaki, Yumiko; Yamaguchi, Keiko; Okutsu, Kayu; Futagami, Taiki; Tamaki, Hisanori; Sameshima, Yoshihiro; Takamine, Kazunori

2017-06-01

Red koji, which refers the solid culture grown koji mold on the steamed rice, is one of the ingredients of Asian fermented foods including the Japanese spirit shochu. This study was aimed at elucidating the characteristic flavor and key volatile compounds of red koji-shochu as well as the mechanism of their formation. Sensory evaluation showed that red koji-shochu has the distinctive flavors cheese, sour, milky, and oily. Fifteen key volatile compounds of red koji-shochu were identified by gas chromatography-mass spectrometry and high-performance liquid chromatography, and by comparison between red koji-shochu and white koji-shochu, as another typical shochu. The mash analysis revealed that ketone compounds and short-chain acids derive from red koji. Furthermore, although other key compounds were produced by yeast, it is highly likely that their concentrations were affected directly or indirectly by the high activities of protease and lipase in red koji. Copyright © 2016 Elsevier Ltd. All rights reserved.

TechTuning: Stress Management For 3D Through-Silicon-Via Stacking Technologies

NASA Astrophysics Data System (ADS)

Radojcic, Riko; Nowak, Matt; Nakamoto, Mark

2011-09-01

The concerns with managing mechanical stress distributions and the consequent effects on device performance and material integrity, for advanced TSV based technologies 3D are outlined. A model and simulation based Design For Manufacturability (DFM) type of a flow for managing the mechanical stresses throughout Si die, stack and package design is proposed. The key attributes of the models and simulators required to fuel the proposed flow are summarized. Finally, some of the essential infrastructure and the Supply Chain support items are described.

Nursing home financial performance: the role of ownership and chain affiliation.

PubMed

Weech-Maldonado, Robert; Laberge, Alex; Pradhan, Rohit; Johnson, Christopher E; Yang, Zhou; Hyer, Kathryn

2012-01-01

The nursing home industry serves one of the most vulnerable populations, and its financial sustainability is a matter of public concern. However, limited empirical evidence exists on the impact of ownership and chain affiliation on nursing home financial performance. The aim of this study was to examine the joint effects of ownership and chain affiliation on the financial performance of the nursing home industry for the study period 1999-2004 on a national sample of 11,236 nursing homes per year. Data included the Medicare Cost Reports; the Online Survey, Certification, and Reporting file; and the Area Resource File. Dependent variables included operating and total margins. Independent variables included four ownership/chain affiliation combinations: for-profit chain, for-profit independent, not-for-profit chain, and not-for-profit independent. Random effects generalized least square regressions were performed. Results show that for-profit nursing homes delivered better financial performance than not-for-profit facilities did across both operating and total margins. However, the relationship between chain affiliation and financial performance was more nuanced. In the case of operating margin, chain-affiliated facilities delivered superior financial performance irrespective of ownership type; however, in the case of total margin, independents outperformed chain-affiliated facilities among for-profits. Our findings show an interactive effect of ownership and chain affiliation on nursing home financial performance, suggesting the pursuit of different organizational strategies by different ownership/chain affiliation subgroups (for-profit chain, for-profit independent, not-for-profit chain, and not-for-profit independent), with implications for financial performance. For-profit independent nursing homes managed to be the top performing group in terms of overall financial despite the operating financial advantage of for-profit chain-affiliated nursing homes. Similarly, not-for-profit independent nursing homes and not-for-profit chain homes had comparable overall financial performance despite the operating financial advantage of chain homes.

Future Supply Chains Enabled by Continuous Processing-Opportunities Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Production of Medium Chain Fatty Acids by Yarrowia lipolytica: Combining Molecular Design and TALEN to Engineer the Fatty Acid Synthase.

PubMed

Rigouin, Coraline; Gueroult, Marc; Croux, Christian; Dubois, Gwendoline; Borsenberger, Vinciane; Barbe, Sophie; Marty, Alain; Daboussi, Fayza; André, Isabelle; Bordes, Florence

2017-10-20

Yarrowia lipolytica is a promising organism for the production of lipids of biotechnological interest and particularly for biofuel. In this study, we engineered the key enzyme involved in lipid biosynthesis, the giant multifunctional fatty acid synthase (FAS), to shorten chain length of the synthesized fatty acids. Taking as starting point that the ketoacyl synthase (KS) domain of Yarrowia lipolytica FAS is directly involved in chain length specificity, we used molecular modeling to investigate molecular recognition of palmitic acid (C16 fatty acid) by the KS. This enabled to point out the key role of an isoleucine residue, I1220, from the fatty acid binding site, which could be targeted by mutagenesis. To address this challenge, TALEN (transcription activator-like effector nucleases)-based genome editing technology was applied for the first time to Yarrowia lipolytica and proved to be very efficient for inducing targeted genome modifications. Among the generated FAS mutants, those having a bulky aromatic amino acid residue in place of the native isoleucine at position 1220 led to a significant increase of myristic acid (C14) production compared to parental wild-type KS. Particularly, the best performing mutant, I1220W, accumulates C14 at a level of 11.6% total fatty acids. Overall, this work illustrates how a combination of molecular modeling and genome-editing technology can offer novel opportunities to rationally engineer complex systems for synthetic biology.

Insights on Li-TFSI diffusion in polyethylene oxide for battery applications

NASA Astrophysics Data System (ADS)

Molinari, Nicola; Mailoa, Jonathan; Kozinsky, Boris; Robert Bosch LLC Collaboration

Improving the energy density, safety and efficiency of lithium-ion (Li-ion) batteries is crucial for the future of energy storage and applications such as electric cars. A key step in the research of next-generation solid polymeric electrolyte materials is understanding the diffusion mechanism of Li-ion in polyethylene oxide (PEO) in order to guide the design of electrolytes materials with high Li-ion diffusion while, ideally, suppress counter-anion movement. In this work we use computer simulations to investigate this long-standing problem at a fundamental level. The system under study has Li-TFSI concentration and PEO chain length that are representative of practical application specifications; the interactions of the molecular model are described via the PCFF+ all-atom force-field. Validation of the model is performed by comparing trends against experiments for diffusivity and conductivity as a function of salt concentration. The analysis of Li-TFSI molecular dynamics trajectories reveals that 1. for high Li-TFSI concentration a significant fraction of Li-ion is coordinated by only TFSI and consistently move less than PEO-coordinated Li-ion, 2. PEO chain motion is key in enabling Li-ion movement. Robert Bosch LLC.

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains.

PubMed

Lautala, Pasi T; Hilliard, Michael R; Webb, Erin; Busch, Ingrid; Richard Hess, J; Roni, Mohammad S; Hilbert, Jorge; Handler, Robert M; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli

2015-12-01

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

NASA Astrophysics Data System (ADS)

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; Busch, Ingrid; Richard Hess, J.; Roni, Mohammad S.; Hilbert, Jorge; Handler, Robert M.; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli

2015-12-01

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term `supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.

Agile Transportation for the 21st Century Objectives for the Defense Transportation System

DTIC Science & Technology

2002-06-01

Strategic Distribution Management Initiative (SDMI) are key supply-chain initiatives in RML. Will the objectives of AT2000 improve or hinder these supply-chain initiatives? This question provides the impetus for this research paper.

Evaluating the green practice of food service supply chain management based on fuzzy DEMATEL-ANP model

NASA Astrophysics Data System (ADS)

Li, Xiaoying; Zhu, Qinghua

2017-01-01

The question on how to evaluate a company's green practice has recently become a key strategic consideration for the food service supply chain management. This paper proposed a novel hybrid model that combines a fuzzy Decision Making Trial And Evaluation Laboratory(DEMATEL) and Analysis Network Process(ANP) methods, which developed the green restaurant criteria and demonstrated the complicated relations among various criteria to help the food service operation to better analyze the real-world situation and determine the different weight value of the criteria .The analysis of the evaluation of green practices will help the food service operation to be clear about the key measures of green practice to improve supply chain management.

Understanding of empty container movement: A study on a bottleneck at an off-dock depot

NASA Astrophysics Data System (ADS)

Zain, Rosmaizura Mohd; Rahman, Mohd Nizam Ab; Nopiah, Zulkifli Mohd; Saibani, Nizaroyani

2014-09-01

Port not only function as connections between marine and land transportation but also as core business areas. In a port terminal, available space is limited, but the influx of container is growing. The off-dock depot is one of the key supply chain players that hold empty containers in the inventory. Therefore, this paper aims to identify the main factors of bottlenecks or congestion that hinder the rapid movement of empty containers from the off-dock depot to the customers. Thirty interviews were conducted with individuals who are key players in the container supply chain. The data were analyzed using Atlas.ti software and the analytic hierarchy process to rank the priority factors of bottlenecks. Findings show that several pertinent factors act as barriers to the key players in the container movement in the day-to-day operations. In future studies, strategies to overcome fragmentation in the container supply chain and logistics must be determined.

Engineering the Pseudomonas aeruginosa II lectin: designing mutants with changed affinity and specificity

NASA Astrophysics Data System (ADS)

Kříž, Zdeněk; Adam, Jan; Mrázková, Jana; Zotos, Petros; Chatzipavlou, Thomais; Wimmerová, Michaela; Koča, Jaroslav

2014-09-01

This article focuses on designing mutations of the PA-IIL lectin from Pseudomonas aeruginosa that lead to change in specificity. Following the previous results revealing the importance of the amino acid triad 22-23-24 (so-called specificity-binding loop), saturation in silico mutagenesis was performed, with the intent of finding mutations that increase the lectin's affinity and modify its specificity. For that purpose, a combination of docking, molecular dynamics and binding free energy calculation was used. The combination of methods revealed mutations that changed the performance of the wild-type lectin and its mutants to their preferred partners. The mutation at position 22 resulted in 85 % in inactivation of the binding site, and the mutation at 23 did not have strong effects thanks to the side chain being pointed away from the binding site. Molecular dynamics simulations followed by binding free energy calculation were performed on mutants with promising results from docking, and also at those where the amino acid at position 24 was replaced for bulkier or longer polar chain. The key mutants were also prepared in vitro and their binding properties determined by isothermal titration calorimetry. Combination of the used methods proved to be able to predict changes in the lectin performance and helped in explaining the data observed experimentally.

Dynamic Impact of Online Word-of-Mouth and Advertising on Supply Chain Performance.

PubMed

Feng, Jian; Liu, Bin

2018-01-04

Cooperative (co-op) advertising investments benefit brand goodwill and further improve supply chain performance. Meanwhile, online word-of-mouth (OWOM) can also play an important role in supply chain performance. On the basis of co-op advertising, this paper considers a single supply chain structure led by a manufacturer and examines a fundamental issue concerning the impact of OWOM on supply chain performance. Firstly, by the method of differential game, this paper analyzes the dynamic impact of OWOM and advertising on supply chain performance (i.e., brand goodwill, sales, and profits) under three different supply chain decisions (i.e., only advertising, and manufacturers with and without sharing cost of OWOM with retailers). We compare and analyze the optimal strategies of advertising and OWOM under the above different supply chain decisions. Secondly, the system dynamics model is established to reflect the dynamic impact of OWOM and advertising on supply chain performance. Finally, three supply chain decisions under two scenarios, strong brand and weak brand, are analyzed through the system dynamics simulation. The results show that the input of OWOM can enhance brand goodwill and improve earnings. It further promotes the OWOM reputation and improves the supply chain performance if manufacturers share the cost of OWOM with retailers. Then, in order to eliminate the retailers from word-of-mouth fraud and establish a fair competition mechanism, the third parties (i.e., regulators or e-commerce platforms) should take appropriate punitive measures against retailers. Furthermore, the effect of OWOM on supply chain performance under a strong brand differed from those under a weak brand. Last but not least, if OWOM is improved, there would be more remarkable performance for the weak brand than that for the strong brand in the supply chain.

Dynamic Impact of Online Word-of-Mouth and Advertising on Supply Chain Performance

PubMed Central

Feng, Jian

2018-01-01

Cooperative (co-op) advertising investments benefit brand goodwill and further improve supply chain performance. Meanwhile, online word-of-mouth (OWOM) can also play an important role in supply chain performance. On the basis of co-op advertising, this paper considers a single supply chain structure led by a manufacturer and examines a fundamental issue concerning the impact of OWOM on supply chain performance. Firstly, by the method of differential game, this paper analyzes the dynamic impact of OWOM and advertising on supply chain performance (i.e., brand goodwill, sales, and profits) under three different supply chain decisions (i.e., only advertising, and manufacturers with and without sharing cost of OWOM with retailers). We compare and analyze the optimal strategies of advertising and OWOM under the above different supply chain decisions. Secondly, the system dynamics model is established to reflect the dynamic impact of OWOM and advertising on supply chain performance. Finally, three supply chain decisions under two scenarios, strong brand and weak brand, are analyzed through the system dynamics simulation. The results show that the input of OWOM can enhance brand goodwill and improve earnings. It further promotes the OWOM reputation and improves the supply chain performance if manufacturers share the cost of OWOM with retailers. Then, in order to eliminate the retailers from word-of-mouth fraud and establish a fair competition mechanism, the third parties (i.e., regulators or e-commerce platforms) should take appropriate punitive measures against retailers. Furthermore, the effect of OWOM on supply chain performance under a strong brand differed from those under a weak brand. Last but not least, if OWOM is improved, there would be more remarkable performance for the weak brand than that for the strong brand in the supply chain. PMID:29300361

Simulation of a cellulose fiber in ionic liquid suggests a synergistic approach to dissolution

DOE PAGES

Mostofian, Barmak; Smith, Jeremy C.; Cheng, Xiaolin

2013-08-11

Ionic liquids dissolve cellulose in a more efficient and environmentally acceptable way than conventional methods in aqueous solution. An understanding of how ionic liquids act on cellulose is essential for improving pretreatment conditions and thus detailed knowledge of the interactions between the cations, anions and cellulose is necessary. Here in this study, to explore ionic liquid effects, we perform all-atom molecular dynamics simulations of a cellulose microfibril in 1-butyl-3-methylimidazolium chloride and analyze site–site interactions and cation orientations at the solute–solvent interface. The results indicate that Cl - anions predominantly interact with cellulose surface hydroxyl groups but with differences between chainsmore » of neighboring cellulose layers, referred to as center and origin chains; Cl- binds to C3-hydroxyls on the origin chains but to C2- and C6-hydroxyls on the center chains, thus resulting in a distinct pattern along glucan chains of the hydrophilic fiber surfaces. In particular, Cl - binding disrupts intrachain O3H–O5 hydrogen bonds on the origin chains but not those on the center chains. In contrast, Bmim + cations stack preferentially on the hydrophobic cellulose surface, governed by non-polar interactions with cellulose. Complementary to the polar interactions between Cl - and cellulose, the stacking interaction between solvent cation rings and cellulose pyranose rings can compensate the interaction between stacked cellulose layers, thus stabilizing detached cellulose chains. Moreover, a frequently occurring intercalation of Bmim + on the hydrophilic surface is observed, which by separating cellulose layers can also potentially facilitate the initiation of fiber disintegration. The results provide a molecular description why ionic liquids are ideal cellulose solvents, the concerted action of anions and cations on the hydrophobic and hydrophilic surfaces being key to the efficient dissolution of the amphiphilic carbohydrate.« less

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmostmore » importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.« less

Opportunities and Challenges in the Design and Analysis of Biomass Supply Chains

DOE PAGES

Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; ...

2015-06-30

The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmostmore » importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.« less

Rhodanese Functions as Sulfur Supplier for Key Enzymes in Sulfur Energy Metabolism

PubMed Central

Aussignargues, Clément; Giuliani, Marie-Cécile; Infossi, Pascale; Lojou, Elisabeth; Guiral, Marianne; Giudici-Orticoni, Marie-Thérèse; Ilbert, Marianne

2012-01-01

How microorganisms obtain energy is a challenging topic, and there have been numerous studies on the mechanisms involved. Here, we focus on the energy substrate traffic in the hyperthermophilic bacterium Aquifex aeolicus. This bacterium can use insoluble sulfur as an energy substrate and has an intricate sulfur energy metabolism involving several sulfur-reducing and -oxidizing supercomplexes and enzymes. We demonstrate that the cytoplasmic rhodanese SbdP participates in this sulfur energy metabolism. Rhodaneses are a widespread family of proteins known to transfer sulfur atoms. We show that SbdP has also some unusual characteristics compared with other rhodaneses; it can load a long sulfur chain, and it can interact with more than one partner. Its partners (sulfur reductase and sulfur oxygenase reductase) are key enzymes of the sulfur energy metabolism of A. aeolicus and share the capacity to use long sulfur chains as substrate. We demonstrate a positive effect of SbdP, once loaded with sulfur chains, on sulfur reductase activity, most likely by optimizing substrate uptake. Taken together, these results lead us to propose a physiological role for SbdP as a carrier and sulfur chain donor to these key enzymes, therefore enabling channeling of sulfur substrate in the cell as well as greater efficiency of the sulfur energy metabolism of A. aeolicus. PMID:22496367

Extended producer responsibility: The impact of organizational dimensions on WEEE collection from households.

PubMed

Corsini, Filippo; Rizzi, Francesco; Frey, Marco

2017-01-01

Extended Producer Responsibility (EPR) has been the backbone of product life cycle management in Europe since the 2000s. Unfortunately, EPR implementation has multiple impacts on the supply chain and, thus, its consequences are not always easily manageable. Although several studies have explored various examples within the EU, the determinants of the effectiveness of EPR management are still not fully understood. This research seeks to bridge this gap by making use of quantitative analyses to investigate how key issues related to: WEEE Directive transposition and organizational settings adopted by each Member State, influenced the results achieved in those Member States in terms of collection from households. In details, a latent class analysis (LCA) has been used to analyse different EPR management strategies based on the policy set, the supply chain structure, and the performance of the household collection of electronic waste. Results highlight the strong connection between allocation of responsibility and organizational model adopted in Member States and performance related to small households equipment's. Conclusions shows the need for stronger coordination of EPR and waste policies in order to achieve adequate levels of Waste Electrical and Electronic Equipment (WEEE) collection, the need of a clear delineation of the responsibilities of each subject of the supply chain and also the importance of "clearing houses" in moderating the impacts of short-sighted competition between collective schemes. Copyright © 2016 Elsevier Ltd. All rights reserved.

High-sensitivity analysis of naturally occurring sugar chains, using a novel fluorescent linker molecule.

PubMed

Sato, Masaki; Ito, Yuji; Arima, Naomichi; Baba, Masanori; Sobel, Michael; Wakao, Masahiro; Suda, Yasuo

2009-07-01

To analyse the binding of sugar chains to proteins, viruses and cells, the surface plasmon resonance (SPR) technique is very convenient and effective because it is a real-time, non-destructive detection system. Key to this method is linker compounds for immobilization of the sugar chains to the gold-coated chip for SPR. Also, well-designed fluorescent labelling reagents are essential when analysing the structure of trace amounts of sugar chains derived from natural sources, such as glycoproteins on the surface of specific cells. In this report, we developed a novel linker molecule, named 'f-mono', which has both of these properties: simple immobilization chemistry and a fluorescent label. Since the molecule contains a 2,5-diaminopyridyl group and a thioctic acid group, conjugation with sugar chains can be achieved using the well-established reductive amination reaction. This conjugate of sugar chain and fluorescent linker (fluorescent ligand-conjugate, FLC) has fluorescent properties (ex. 335 nm, em. 380 nm), and as little as 1 microg of FLC can be easily purified using HPLC with a fluorescent detector. MS and MS/MS analysis of the FLC is also possible. As a +2 Da larger MS peak ([M + H + 2](+) ion) was always associated with the theoretical MS peak ([M + H](+)) (due to the reduction of the thioctic acid moiety), the MS peaks of the FLC were easily found, even using unfractionated crude samples. Immobilization of the FLC onto gold-coated chips, and their subsequent SPR analyses were successively accomplished, as had been performed previously using non-fluorescent ligand conjugates.

Rapid and Sensitive Assessment of Globin Chains for Gene and Cell Therapy of Hemoglobinopathies

PubMed Central

Loucari, Constantinos C.; Patsali, Petros; van Dijk, Thamar B.; Stephanou, Coralea; Papasavva, Panayiota; Zanti, Maria; Kurita, Ryo; Nakamura, Yukio; Christou, Soteroulla; Sitarou, Maria; Philipsen, Sjaak; Lederer, Carsten W.; Kleanthous, Marina

2018-01-01

The β-hemoglobinopathies sickle cell anemia and β-thalassemia are the focus of many gene-therapy studies. A key disease parameter is the abundance of globin chains because it indicates the level of anemia, likely toxicity of excess or aberrant globins, and therapeutic potential of induced or exogenous β-like globins. Reversed-phase high-performance liquid chromatography (HPLC) allows versatile and inexpensive globin quantification, but commonly applied protocols suffer from long run times, high sample requirements, or inability to separate murine from human β-globin chains. The latter point is problematic for in vivo studies with gene-addition vectors in murine disease models and mouse/human chimeras. This study demonstrates HPLC-based measurements of globin expression (1) after differentiation of the commonly applied human umbilical cord blood–derived erythroid progenitor-2 cell line, (2) in erythroid progeny of CD34+ cells for the analysis of clustered regularly interspaced short palindromic repeats/Cas9-mediated disruption of the globin regulator BCL11A, and (3) of transgenic mice holding the human β-globin locus. At run times of 8 min for separation of murine and human β-globin chains as well as of human γ-globin chains, and with routine measurement of globin-chain ratios for 12 nL of blood (tested for down to 0.75 nL) or of 300,000 in vitro differentiated cells, the methods presented here and any variant-specific adaptations thereof will greatly facilitate evaluation of novel therapy applications for β-hemoglobinopathies. PMID:29325430

A random-key encoded harmony search approach for energy-efficient production scheduling with shared resources

NASA Astrophysics Data System (ADS)

Garcia-Santiago, C. A.; Del Ser, J.; Upton, C.; Quilligan, F.; Gil-Lopez, S.; Salcedo-Sanz, S.

2015-11-01

When seeking near-optimal solutions for complex scheduling problems, meta-heuristics demonstrate good performance with affordable computational effort. This has resulted in a gravitation towards these approaches when researching industrial use-cases such as energy-efficient production planning. However, much of the previous research makes assumptions about softer constraints that affect planning strategies and about how human planners interact with the algorithm in a live production environment. This article describes a job-shop problem that focuses on minimizing energy consumption across a production facility of shared resources. The application scenario is based on real facilities made available by the Irish Center for Manufacturing Research. The formulated problem is tackled via harmony search heuristics with random keys encoding. Simulation results are compared to a genetic algorithm, a simulated annealing approach and a first-come-first-served scheduling. The superior performance obtained by the proposed scheduler paves the way towards its practical implementation over industrial production chains.

Using the Chain Rule as the Key Link in Deriving the General Rules for Differentiation

ERIC Educational Resources Information Center

Sprows, David

2011-01-01

The standard approach to the general rules for differentiation is to first derive the power, product, and quotient rules and then derive the chain rule. In this short article we give an approach to these rules which uses the chain rule as the main tool in deriving the power, product, and quotient rules in a manner which is more student-friendly…

Qualitative analysis of the risks and practices associated with the spread of African swine fever within the smallholder pig value chains in Uganda.

PubMed

Dione, Michel; Ouma, Emily; Opio, Felix; Kawuma, Brian; Pezo, Danilo

2016-12-01

A study was undertaken between September 2014 and December 2014 to assess the perceptions of smallholder pig value chain actors of the risks and practices associated with the spread of African swine fever (ASF) disease within the pig value chains. Data was collected from 136 value chain actors and 36 key informants through 17 group discussions and two key informant interview (KII) sessions respectively using Participatory Rural Appraisal (PRA) tools. Results from this study revealed that according to value chain actors and stakeholders, the transporting, slaughtering, and collecting/bulking nodes represent the highest risk, followed by the inputs and services (feeds and drugs) supply nodes. The processing, whole sale and consumption nodes represented the lowest risk. Value chain actors are aware of the disease and its consequences to the pig industry, however biosecurity measures are poorly implemented at all nodes. As for the causes, value chain actors pointed to several factors, such as inadequate knowledge of mechanisms for the spread of the disease, poor enforcement of regulations on disease control, and low capacities of actors to implement biosecurity measures, amongst others. Although traders, butchers and veterinary practitioners accepted that they played an important role in the spread of the virus, they did not perceive themselves as key actors in the control of the disease; instead, they believed that only farmers should adopt biosecurity measures on their farms because they keep the pigs for a longer period. Most of the recommendations given by the value chain actors for controlling and preventing ASF disease were short term, and targeted mainly pig producers. These recommendations included: the establishment of live pig collection centres so that traders and brokers do not have to directly access pig farms, capacity building of value chain actors on application of biosecurity, enactment and enforcement of by-laws on live pig movements and establishment of operational outbreak reporting mechanism at district level. Long term recommendations included the development of a vaccine, as well as pen-side diagnostic tests. This study suggests that interventions to control ASF disease through application of biosecurity measures should target all value chain nodes, while putting more emphasis on post-farm nodes especially the trading. Copyright © 2016 Elsevier B.V. All rights reserved.

Learning phase transitions by confusion

NASA Astrophysics Data System (ADS)

van Nieuwenburg, Evert P. L.; Liu, Ye-Hua; Huber, Sebastian D.

2017-02-01

Classifying phases of matter is key to our understanding of many problems in physics. For quantum-mechanical systems in particular, the task can be daunting due to the exponentially large Hilbert space. With modern computing power and access to ever-larger data sets, classification problems are now routinely solved using machine-learning techniques. Here, we propose a neural-network approach to finding phase transitions, based on the performance of a neural network after it is trained with data that are deliberately labelled incorrectly. We demonstrate the success of this method on the topological phase transition in the Kitaev chain, the thermal phase transition in the classical Ising model, and the many-body-localization transition in a disordered quantum spin chain. Our method does not depend on order parameters, knowledge of the topological content of the phases, or any other specifics of the transition at hand. It therefore paves the way to the development of a generic tool for identifying unexplored phase transitions.

Firefly: A HOT camera core for thermal imagers with enhanced functionality

NASA Astrophysics Data System (ADS)

Pillans, Luke; Harmer, Jack; Edwards, Tim

2015-06-01

Raising the operating temperature of mercury cadmium telluride infrared detectors from 80K to above 160K creates new applications for high performance infrared imagers by vastly reducing the size, weight and power consumption of the integrated cryogenic cooler. Realizing the benefits of Higher Operating Temperature (HOT) requires a new kind of infrared camera core with the flexibility to address emerging applications in handheld, weapon mounted and UAV markets. This paper discusses the Firefly core developed to address these needs by Selex ES in Southampton UK. Firefly represents a fundamental redesign of the infrared signal chain reducing power consumption and providing compatibility with low cost, low power Commercial Off-The-Shelf (COTS) computing technology. This paper describes key innovations in this signal chain: a ROIC purpose built to minimize power consumption in the proximity electronics, GPU based image processing of infrared video, and a software customisable infrared core which can communicate wirelessly with other Battlespace systems.

Structural instability of the CoO 4 tetrahedral chain in SrCoO 3-δ thin films

DOE PAGES

Glamazda, A.; Choi, Kwang-yong; Lemmens, P.; ...

2015-08-31

Raman scattering experiments together with detailed lattice dynamic calculations are performed to elucidate crystallographic and electronic peculiarities of SrCoO 3-δ films. We observe that the 85 cm -1 phonon mode involving the rotation of a CoO 4 tetrahedron undergoes a hardening by 21 cm -1 when the temperature is decreased. In addition, new phonon modes appear at 651.5 and 697.6 cm -1 . The latter modes are attributed to the Jahn-Teller activated modes. Upon cooling from room temperature, all phonons exhibit an exponential-like increase of intensity with a characteristic energy of about 103–107 K. We attribute this phenomenon to anmore » instability of the CoO 4 tetrahedral chain structure, which constitutes a key ingredient to understand the electronic and structural properties of the brownmillerite SrCoO 2.5.« less

A study on the stability of a motorcycle wheel-swingarm suspension with chain transmission

NASA Astrophysics Data System (ADS)

Sorrentino, S.; Leonelli, L.

2017-11-01

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22 Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.

Controlled chain polymerisation and chemical soldering for single-molecule electronics.

PubMed

Okawa, Yuji; Akai-Kasaya, Megumi; Kuwahara, Yuji; Mandal, Swapan K; Aono, Masakazu

2012-05-21

Single functional molecules offer great potential for the development of novel nanoelectronic devices with capabilities beyond today's silicon-based devices. To realise single-molecule electronics, the development of a viable method for connecting functional molecules to each other using single conductive polymer chains is required. The method of initiating chain polymerisation using the tip of a scanning tunnelling microscope (STM) is very useful for fabricating single conductive polymer chains at designated positions and thereby wiring single molecules. In this feature article, developments in the controlled chain polymerisation of diacetylene compounds and the properties of polydiacetylene chains are summarised. Recent studies of "chemical soldering", a technique enabling the covalent connection of single polydiacetylene chains to single functional molecules, are also introduced. This represents a key step in advancing the development of single-molecule electronics.

An intelligent traceability system: Efficient tool for a supply chain sustainability

NASA Astrophysics Data System (ADS)

Bougdira, Abdesselam; Ahaitouf, Abdelaziz; Akharraz, Ismail

2016-07-01

The supply chain sustainability becomes a necessity for a smooth, a rapid and a fluid economic transaction. To reach a sustainable supply chain, we propose to focus attention on products and their lifecycle. So, we consider the traceability as a major success key to ensure the supply chain sustainability. For that, we consider a supply chain design that use an intelligent products traced by an intelligent traceability system. This system identifies, restores history and properties of a product, besides it tracks, in real-time a product. This solution can, also, bring, in the product environment, appropriate adjustments to prevent any risk of threatening qualities for the product. So, it helps supply chain contributors making the sustainable adjustments and the instant benchmark of the supply chain sustainability.

Total synthesis of a CD-ring: side-chain building block for preparing 17-epi-calcitriol derivatives from the Hajos-Parrish dione.

PubMed

Michalak, Karol; Wicha, Jerzy

2011-08-19

An efficient synthesis of the key building block for 17-epi-calctriol from the Hajos-Parrish dione involving a sequence of diastereoselective transformation of the azulene core and the side-chain construction is presented.

Production of reactive oxygen species in brain mitochondria: contribution by electron transport chain and non-electron transport chain sources.

PubMed

Adam-Vizi, Vera

2005-01-01

Overwhelming evidence has accumulated indicating that oxidative stress is a crucial factor in the pathogenesis of neurodegenerative diseases. The major site of production of superoxide, the primary reactive oxygen species (ROS), is considered to be the respiratory chain in the mitochondria, but the exact mechanism and the precise location of the physiologically relevant ROS generation within the respiratory chain have not been disclosed as yet. Studies performed with isolated mitochondria have located ROS generation on complex I and complex III, respectively, depending on the substrates or inhibitors used to fuel or inhibit respiration. A more "physiological" approach is to address ROS generation of in situ mitochondria, which are present in their normal cytosolic environment. Hydrogen peroxide formation in mitochondria in situ in isolated nerve terminals is enhanced when complex I, complex III, or complex IV is inhibited. However, to induce a significant increase in ROS production, complex III and complex IV have to be inhibited by >70%, which raises doubts as to the physiological importance of ROS generation by these complexes. In contrast, complex I inhibition to a small degree is sufficient to enhance ROS generation, indicating that inhibition of complex I by approximately 25-30% observed in postmortem samples of substantia nigra from patients suffering from Parkinson's disease could be important in inducing oxidative stress. Recently, it has been described that a key Krebs cycle enzyme, alpha-ketoglutarate dehydrogenase (alpha-KGDH), is also able to produce ROS. ROS formation by alpha-KGDH is regulated by the NADH/NAD+ ratio, suggesting that this enzyme could substantially contribute to generation of oxidative stress due to inhibition of complex I. As alpha-KGDH is not only a generator but also a target of ROS, it is proposed that alpha-KGDH is a key factor in a vicious cycle by which oxidative stress is induced and promoted in nerve terminals.

Professional changes induced by a redesigned immunization supply chain in the Comé Health Zone, Benin.

PubMed

Guillermet, Elise; Alfa, Daleb Abdoulaye; Gbodja, Romule; Jaillard, Philippe

2017-04-19

At the end of 2013, the Government of Benin and Agence de Médecine Préventive (AMP) launched a demonstration project in Comé Health Zone (HZ) to optimize the vaccine supply chain. A key part of the demonstration project was the creation of an "informed push model" of vaccine distribution supported by a new logistician position at the health zone (district) level. At the conclusion of the demonstration project in 2015, the authors conducted an anthropological study consisting of semi-structured interviews with 62 participants to assess how the new model changed the professional identities, roles, responsibilities, and practices of personnel involved in vaccine management during and just after the demonstration project end in Comé HZ. The study found that health workers considered the logistician as a key player in enabling them to perform their public health mission, notably by improving knowledge and practices in vaccine management, providing supportive supervision, and improving the availability of vaccines and other supplies so that immunization sessions could occur more reliably and professionally within the communities they served. The demonstration project was widely accepted among study participants. The study was approved by the Cotonou Ethics Committee (CER-ISBA No. 56 dated 09/04/2015). Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

The need for innovative strategies to improve immunisation services in rural Zimbabwe.

PubMed

Chadambuka, Addmore; Chimusoro, Anderson; Apollo, Tsitsilina; Tshimanga, Mufuta; Namusisi, Olivia; Luman, Elizabeth T

2012-01-01

Gokwe South, a rural district in Midlands Province, Zimbabwe, reported the lowest rate of immunisation coverage in the country in 2005: 55 per cent of children vaccinated with three doses of diphtheria/pertussis/tetanus vaccine (DPT3) and 35 per cent dropout between the first and third dose of DPT. In January 2007, the authors assessed local barriers to immunisation and proposed strategies to improve immunisation rates in the district, in the face of nationwide economic and political challenges. A situational analysis was performed to assess barriers to immunisation using focus-group discussions with health workers, key informant interviews with health management and community leaders, and desk reviews of records. Responses were categorised and solutions proposed. Health workers and key informants reported that immunisation service delivery was hampered by insufficient availability of gas for cold-chain equipment, limited transport and fuel to conduct basic activities, and inadequate staff and supervision. Improving coverage will require prioritising gas for vaccine cold-chain equipment, identifying reliable transportation or alternative transportation solutions, and increased staff, training and supervision. Local assessment is critical to pinpointing site-specific barriers, and innovative strategies are needed to overcome existing contextual challenges. © 2012 The Author(s). Disasters © Overseas Development Institute, 2012.

Performance Evaluation of Analog Beamforming with Hardware Impairments for mmW Massive MIMO Communication in an Urban Scenario.

PubMed

Gimenez, Sonia; Roger, Sandra; Baracca, Paolo; Martín-Sacristán, David; Monserrat, Jose F; Braun, Volker; Halbauer, Hardy

2016-09-22

The use of massive multiple-input multiple-output (MIMO) techniques for communication at millimeter-Wave (mmW) frequency bands has become a key enabler to meet the data rate demands of the upcoming fifth generation (5G) cellular systems. In particular, analog and hybrid beamforming solutions are receiving increasing attention as less expensive and more power efficient alternatives to fully digital precoding schemes. Despite their proven good performance in simple setups, their suitability for realistic cellular systems with many interfering base stations and users is still unclear. Furthermore, the performance of massive MIMO beamforming and precoding methods are in practice also affected by practical limitations and hardware constraints. In this sense, this paper assesses the performance of digital precoding and analog beamforming in an urban cellular system with an accurate mmW channel model under both ideal and realistic assumptions. The results show that analog beamforming can reach the performance of fully digital maximum ratio transmission under line of sight conditions and with a sufficient number of parallel radio-frequency (RF) chains, especially when the practical limitations of outdated channel information and per antenna power constraints are considered. This work also shows the impact of the phase shifter errors and combiner losses introduced by real phase shifter and combiner implementations over analog beamforming, where the former ones have minor impact on the performance, while the latter ones determine the optimum number of RF chains to be used in practice.

Instructional Chains as a Method for Examining the Teaching and Learning of Argumentative Writing in Classrooms

ERIC Educational Resources Information Center

VanDerHeide, Jennifer; Newell, George E.

2013-01-01

We propose "instructional chaining" as an analytic method for capturing and describing key instructional episodes enacted by expert writing teachers to foster the recontextualization over time of the social practices of argumentative writing through process-oriented instructional approaches. The article locates instructional chaining…

Assessing “First Mile” Supply Chain Factors Affecting Timeliness of School-Based Deworming Interventions: Supply and Logistics Performance Indicators

PubMed Central

Koporc, Kimberly M.; Strunz, Eric; Holloway, Cassandra; Addiss, David G.; Lin, William

2015-01-01

Background Between 2007 and 2012, Children Without Worms (CWW) oversaw the Johnson & Johnson (J&J) donation of Vermox (mebendazole) for treatment of school-age children to control soil-transmitted helminthiasis (STH). To identify factors associated with on-time, delayed, or missed mass drug administration (MDA) interventions, and explore possible indicators for supply chain performance for drug donation programs, we reviewed program data for the 14 STH-endemic countries CWW supported during 2007–2012. Methodology Data from drug applications, shipping records, and annual treatment reports were tracked using Microsoft Excel. Qualitative data from interviews with key personnel were used to provide additional context on the causes of delayed or missed MDAs. Four possible contributory factors to delayed or missed MDAs were considered: production, shipping, customs clearance, and miscellaneous in-country issues. Coverage rates were calculated by dividing the number of treatments administered by the number of children targeted during the MDA. Principal Findings Of the approved requests for 78 MDAs, 54 MDAs (69%) were successfully implemented during or before the scheduled month. Ten MDAs (13%) were classified as delayed; seven of these were delayed by one month or less. An additional 14 MDAs (18%) were classified as missed. For the 64 on-time or delayed MDAs, the mean coverage was approximately 88%. Conclusions and Significance To continue to assess the supply chain processes and identify areas for improvement, we identified four indicators or metrics for supply chain performance that can be applied across all neglected tropical disease (NTD) drug donation programs: (1) donor having available inventory to satisfy the country request for donation; (2) donor shipping the approved number of doses; (3) shipment arriving at the Central Medical Stores one month in advance of the scheduled MDA date; and (4) country programs implementing the MDA as scheduled. PMID:26657842

Identifying key genes in glaucoma based on a benchmarked dataset and the gene regulatory network.

PubMed

Chen, Xi; Wang, Qiao-Ling; Zhang, Meng-Hui

2017-10-01

The current study aimed to identify key genes in glaucoma based on a benchmarked dataset and gene regulatory network (GRN). Local and global noise was added to the gene expression dataset to produce a benchmarked dataset. Differentially-expressed genes (DEGs) between patients with glaucoma and normal controls were identified utilizing the Linear Models for Microarray Data (Limma) package based on benchmarked dataset. A total of 5 GRN inference methods, including Zscore, GeneNet, context likelihood of relatedness (CLR) algorithm, Partial Correlation coefficient with Information Theory (PCIT) and GEne Network Inference with Ensemble of Trees (Genie3) were evaluated using receiver operating characteristic (ROC) and precision and recall (PR) curves. The interference method with the best performance was selected to construct the GRN. Subsequently, topological centrality (degree, closeness and betweenness) was conducted to identify key genes in the GRN of glaucoma. Finally, the key genes were validated by performing reverse transcription-quantitative polymerase chain reaction (RT-qPCR). A total of 176 DEGs were detected from the benchmarked dataset. The ROC and PR curves of the 5 methods were analyzed and it was determined that Genie3 had a clear advantage over the other methods; thus, Genie3 was used to construct the GRN. Following topological centrality analysis, 14 key genes for glaucoma were identified, including IL6 , EPHA2 and GSTT1 and 5 of these 14 key genes were validated by RT-qPCR. Therefore, the current study identified 14 key genes in glaucoma, which may be potential biomarkers to use in the diagnosis of glaucoma and aid in identifying the molecular mechanism of this disease.

Identification of the gene for fly non-muscle myosin heavy chain: Drosophila myosin heavy chains are encoded by a gene family.

PubMed Central

Kiehart, D P; Lutz, M S; Chan, D; Ketchum, A S; Laymon, R A; Nguyen, B; Goldstein, L S

1989-01-01

In contrast to vertebrate species Drosophila has a single myosin heavy chain gene that apparently encodes all sarcomeric heavy chain polypeptides. Flies also contain a cytoplasmic myosin heavy chain polypeptide that by immunological and peptide mapping criteria is clearly different from the major thoracic muscle isoform. Here, we identify the gene that encodes this cytoplasmic isoform and demonstrate that it is distinct from the muscle myosin heavy chain gene. Thus, fly myosin heavy chains are the products of a gene family. Our data suggest that the contractile function required to power myosin based movement in non-muscle cells requires myosin diversity beyond that available in a single heavy chain gene. In addition, we show, that accumulation of cytoplasmic myosin transcripts is regulated in a developmental stage specific fashion, consistent with a key role for this protein in the movements of early embryogenesis. Images PMID:2498088

Key performance indicators' assessment to develop best practices in an Emergency Medical Communication Centre.

PubMed

Penverne, Yann; Leclere, Brice; Labady, Julien; Berthier, Frederic; Jenvrin, Joel; Javaudin, Francois; Batard, Eric; Montassier, Emmanuel

2017-05-17

Emergency Medical Communication Centre (EMCC) represents a pivotal link in the chain of survival for those requiring rapid response for out-of-hospital medical emergencies. Assessing and grading the performance of EMCCs are warranted as it can affect the health and safety of the served population. The aim of our work was to describe the activity on an EMCC and to explore the associations between different key performance indicators. We carried out our prospective observational study in the EMCC of Nantes, France, from 6 June 2011 to 6 June 2015. The EMCC performance was assessed with the following key performance indicators: answered calls, Quality of Service 20 s (QS20), occupation rate and average call duration. A total of 35 073 h of dispatch activity were analysed. 1 488 998 emergency calls were answered. The emergency call incidence varied slightly from 274 to 284 calls/1000 citizens/year between 2011 and 2015. The median occupation rate was 35% (25-44). QS20 was correlated negatively with the occupation rate (Spearman's ρ: -0.78). The structural equation model confirmed that the occupation rate was highly correlated with the QS20 (standardized coefficient: -0.89). For an occupation rate of 26%, the target value estimated by our polynomial model, the probability of achieving a QS20 superior or equal to 95% varied between 56 and 84%. The occupation rate appeared to be the most important factor contributing towards the QS20. Our data will be useful to develop best practices and guidelines in the field of emergency medicine communication centres.

Evolutionary Game Model Study of Construction Green Supply Chain Management under the Government Intervention

NASA Astrophysics Data System (ADS)

Xing, Yuanzhi; Deng, Xiaoyi

2017-11-01

The paper first has defined the concepts of green supply chain management and evolution game theory, and pointed out the characteristics of green supply chain management in construction. The main participants and key links of the construction green supply chain management are determined by constructing the organization framework. This paper established the evolutionary game model between construction enterprises and recycling enterprises for the green supply chain closed-loop structure. The waste recycling evolutionary stability equilibrium solution is obtained to explore the principle and effective scope of government policy intervention. This paper put forward the relevant countermeasures to the green supply chain management in construction recycling stage from the government point of view. The conclusion has reference value and guidance to the final product construction enterprises, recycling enterprises and the government during green supply chain.

Future supply chains enabled by continuous processing--opportunities and challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-03-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Josh; West, Devin

This analysis identifies key opportunities in the carbon fiber supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas — wind energy, aerospace, automotive, and pressure vessels — that top the list of industries using carbon fiber and carbon fiber reinforced polymers. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.

On the suitability of Elekta’s Agility 160 MLC for tracked radiation delivery: closed-loop machine performance

NASA Astrophysics Data System (ADS)

Glitzner, M.; Crijns, S. P. M.; de Senneville, B. Denis; Lagendijk, J. J. W.; Raaymakers, B. W.

2015-03-01

For motion adaptive radiotherapy, dynamic multileaf collimator tracking can be employed to reduce treatment margins by steering the beam according to the organ motion. The Elekta Agility 160 MLC has hitherto not been evaluated for its tracking suitability. Both dosimetric performance and latency are key figures and need to be assessed generically, independent of the used motion sensor. In this paper, we propose the use of harmonic functions directly fed to the MLC to determine its latency during continuous motion. Furthermore, a control variable is extracted from a camera system and fed to the MLC. Using this setup, film dosimetry and subsequent γ statistics are performed, evaluating the response when tracking (MRI)-based physiologic motion in a closed-loop. The delay attributed to the MLC itself was shown to be a minor contributor to the overall feedback chain as compared to the impact of imaging components such as MRI sequences. Delay showed a linear phase behaviour of the MLC employed in continuously dynamic applications, which enables a general MLC-characterization. Using the exemplary feedback chain, dosimetry showed a vast increase in pass rate employing γ statistics. In this early stage, the tracking performance of the Agility using the test bench yielded promising results, making the technique eligible for translation to tracking using clinical imaging modalities.

The application of supply chain management principles to emergency management logistics: An empirical study.

PubMed

Peterson, Matthew R; Young, Richard R; Gordon, Gary A

2016-01-01

Key elements of supply chain theory remain relevant to emergency management (EM) logistics activities. The Supply Chain Operations Reference model can also serve as a useful template for the planning, organizing, and execution of EM logistics. Through a series of case studies (developed through intensive survey of organizations and individuals responsible for EM), the authors identified the extent supply chain theory is being adopted and whether the theory was useful for emergency logistics managers. The authors found several drivers that influence the likelihood of an organization to implement elements of supply chain management: the frequency of events, organizational resources, population density, range of events, and severity of the disaster or emergency.

Analysis of Agility Performance of Supply Chain: A Case Study on Indian Automotive Manufacturer

NASA Astrophysics Data System (ADS)

Routroy, S.; Sharma, S.; Bhardwaj, A.

2018-04-01

Manufacturing companies should understand the changing customer needs and expectations, access and defend the competitive pressure, anticipate and manage the uncertain demand and supply chain risk, and implement the appropriate technology to survive and excel in today’s marketplace. Therefore, they are moving away from mass production (i.e. lean supply chain) to one based on fast-responsiveness and flexibility, capitalizing on the rapid advancement in internet technologies and factory-on-demand mode of production (i.e. agile supply chain). It is observed that manufacturing companies in India in general and automotive supply chain in specific are compelled to cultivate supply chain agility for enhancing its performance level on continuous basis and comparing its supply chain agility performance with competitors to survive and sustain in the competitive business environment. Therefore, a methodology is proposed to evaluate the supply chain agility of a manufacturing supply chain and compare its performance level with competitors using Fuzzy Analytic Hierarchy Process and Taguchi Loss Function. A case study is developed and the proposed methodology is applied to Indian automotive supply chain for explaining the salient features of it.

Study on Introduction of CO2 Free Energy to Japan with Liquid Hydrogen

NASA Astrophysics Data System (ADS)

Kamiya, Shoji; Nishimura, Motohiko; Harada, Eichi

In Japan, both CO2(Carbon dioxide) emission reduction and energy security are the very important social issues after Fukushima Daiichi accident. On the other hand, FCV (Fuel Cell Vehicle)using hydrogen will be on the market in 2015. Introducing large mass hydrogen energy is being expected as expanding hydrogen applications, or solution to energy issues of Japan.And then,the Japanese government announced the road map for introducing hydrogen energy supply chain in this June,2014. Under these circumstances, imported CO2 free hydrogen will be one of the solutions for energy security and CO2 reduction, if the hydrogen price is affordable. To achieve this, Kawasaki Heavy Industries, Ltd. (KHI) performed a feasibility studyon CO2-free hydrogen energy supply chainfrom Australian brown coal linked with CCS (Carbon dioxide Capture and Storage) to Japan. In the study, hydrogen production systems utilizing brown coal gasificationandLH2 (liquid hydrogen)systems as storing and transporting hydrogen are examined.This paper shows the possibilityof realizingthe CO2 free hydrogen supply chain, the cost breakdown of imported hydrogen cost, its cost competitiveness with conventionalfossil, andLH2systems as key technologies of the hydrogen energy chain.

Role of electron transport chain of chloroplasts in oxidative burst of interaction between Erwinia amylovora and host cells.

PubMed

Abdollahi, Hamid; Ghahremani, Zahra; Erfaninia, Kobra; Mehrabi, Rahim

2015-05-01

Erwinia amylovora is a necrogenic bacterium, causing the fire blight disease on many rosaceous plants. Triggering oxidative burst by E. amylovora is a key response by which host plants try to restrain pathogen spread. Electron transport chain (ETC) of chloroplasts is known as an inducible source of reactive oxygen species generation in various stresses. This research was performed to assess the role of this ETC in E. amylovora-host interaction using several inhibitors of this chain in susceptible and resistant apple and pear genotypes. All ETC inhibitors delayed appearance of disease necrosis, but the effects of methyl viologen, glutaraldehyde, and DCMU were more significant. In the absence of inhibitors, resistant genotypes showed an earlier and severe H2O2 generation and early suppression of redox dependent, psbA gene. The effects of inhibitors were corresponding to the redox potential of ETC inhibitory sites. In addition, delayed necrosis appearance was associated with the decreased disease severity and delayed H2O2 generation. These results provide evidences for the involvement of this ETC in host oxidative burst and suggest that chloroplast ETC has significant role in E. amylovora-host interaction.

Polymer relaxation and stretching dynamics in semi-dilute DNA solutions: a single molecule study

NASA Astrophysics Data System (ADS)

Hsiao, Kai-Wen; Brockman, Christopher; Schroeder, Charles

2015-03-01

In this work, we study polymer relaxation and stretching dynamics in semi-dilute DNA solutions using single molecule techniques. Using this approach, we uncover a unique scaling relation for longest polymer relaxation time that falls in the crossover regime described by semi-flexible polymer solutions, which is distinct from truly flexible polymer chains. In addition, we performed a series of step-strain experiments on single polymers in semi-dilute solutions in planar extensional flow using an automated microfluidic trap. In this way, we are able to precisely control the flow strength and the amount of strain applied to single polymer chains, thereby enabling direct observation of the full stretching and relaxation process in semi-dilute solutions during transient start-up and flow cessation. Interestingly, we observe polymer individualism in the conformation of single chains in semi-dilute solutions, which to our knowledge has not yet been observed. In addition, we observe the relaxation data can be explained by a multi-exponential decay process after flow cessation in semi-dilute solutions. Overall, our work reports key advance in non-dilute polymer systems from a molecular perspective via direct observation of dynamics in strong flows. DOW fellowship.

Strategies for manipulation of oxygen utilization by the electron transfer chain in microbes for metabolic engineering purposes.

PubMed

Bennett, George N; San, Ka-Yiu

2017-05-01

Microaerobic growth is of importance in ecological niches, pathogenic infections and industrial production of chemicals. The use of low levels of oxygen enables the cell to gain energy and grow more robustly in the presence of a carbon source that can be oxidized and provide electrons to the respiratory chain in the membrane. A considerable amount of information is available on the genes and proteins involved in respiratory growth and the regulation of genes involved in aerobic and anaerobic metabolism. The dependence of regulation on sensing systems that respond to reduced quinones (e.g. ArcB) or oxygen levels that affect labile redox components of transcription regulators (Fnr) are key in understanding the regulation. Manipulation of the amount of respiration can be difficult to control in dense cultures or inadequately mixed reactors leading to inhomogeneous cultures that may have lower than optimal performance. Efforts to control respiration through genetic means have been reported and address mutations affecting components of the electron transport chain. In a recent report completion for intermediates of the ubiquinone biosynthetic pathway was used to dial the level of respiration vs lactate formation in an aerobically grown E. coli culture.

Selected Aspects Of The Risk In The Supply Chain In Context Of The Supplier Quality Management

NASA Astrophysics Data System (ADS)

Koblen, Ivan; Lestyánszka Škůrková, Katarína

2015-06-01

The introductory part of the paper underlines the importance of "Risk-based thinking" in the Quality Management System (QMS) and risk in the supply chain, as a principle part of the QMS. After introducing the key terms, the authors focused on the principle part of the article - explanation of the external and internal supply chain risks and the main factors concerning the supply risks, demand risks and environmental risks (as cardinal types of external supply chain risks) as well as the manufacturing and process risks, network/planning and control risks (as most important types of internal supply chain risks). The authors inform on the selected supply chain risk management tools, especially on those which are linked to the appropriate utilization of quality management tools.

Study of China green supply chain management policies and standard

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxin; Huang, Jin; Lin, Ling

2017-11-01

With the highlight of the environment issues, manufacturing industry needs to be environmentally managed with integrated methods in system aspect. Green supply chain management, integrating the environment aspect into each step of the implement of supply chain management, is the key measure to improve the efficiency of environmental management and to remit the pollution. It also helps to make best use and configuration of the resources and has been attracting much attention from our government, enterprises and academia in recent years. This paper introduced the definition and content of green supply chain management, concluded the research progress of green supply chain management by domestic scholars, stated the characteristic and achievement of the implement of green supply chain management in China as well as analyzed the current existing problems and suggestions in the future.

[The role of branched-chain amino acids metabolism in development of cardiovascular diseases and its risk factors].

PubMed

Lyzohub, V H; Zaval's'ka, T V; Savchenko, O V; Tyravs'ka, Iu V

2013-01-01

Branched-chain amino acids play the key role in many metabolism processes in organism generally and in cardiovascular protection. It was discovered its importance in mitochondrial biogenesis, antioxidant and antiaging processes, its antihypertension and antiarrhythmic effects, its role in obesity and diabetes mellitus.

77 FR 30017 - International Capacity Building With Respect to Food Safety; Public Meeting; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... the global supply chain as a key Agency priority. Indeed, two recent reports have focused on the challenges of global supply chains: FDA's ``Pathway to Global Product Safety and Quality,'' and the Institute... more authorities to address the increasingly globalized food supply and prevent problems before they...

Stereoselective total synthesis of Oxylipin from open chain gluco-configured building block.

PubMed

Borkar, Santosh Ramdas; Aidhen, Indrapal Singh

2017-04-18

Total synthesis of naturally occurring Oxylipin has been achieved from open chain gluco-configured building block which is readily assembled from inexpensive and commercially available D-(+)-gluconolactone. Grignard reaction and Wittig olefination reactions are key steps for the requisite CC bond formation. Copyright © 2017. Published by Elsevier Ltd.

Beyond upgrading typologies - In search of a better deal for honey value chains in Brazil.

PubMed

Figueiredo Junior, Hugo S de; Meuwissen, Miranda P M; van der Lans, Ivo A; Oude Lansink, Alfons G J M

2017-01-01

Selection of value chain strategies by development practitioners and value chain participants themselves has been restricted to preset types of upgrading. This paper argues for an extension of the range of strategy solutions to value chains. An empirical application identifies successful strategies for honey value chains in Brazil for 2015-2020. Strategy and performance indicators were selected using the value chain Structure-Conduct-Performance (SCP) framework. Experts' opinion was elicited in a Delphi for business scenarios, and adaptive conjoint analysis was used to identify strategies for increasing production growth and local value-added. This study identifies important strategies beyond upgrading typologies, and finds that important strategies differ by performance goal and scenario. The value chain SCP allows searching for promising strategies towards performance-the "better deal"-in an integrated way.

Performance and cost of materials for lithium-based rechargeable automotive batteries

NASA Astrophysics Data System (ADS)

Schmuch, Richard; Wagner, Ralf; Hörpel, Gerhard; Placke, Tobias; Winter, Martin

2018-04-01

It is widely accepted that for electric vehicles to be accepted by consumers and to achieve wide market penetration, ranges of at least 500 km at an affordable cost are required. Therefore, significant improvements to lithium-ion batteries (LIBs) in terms of energy density and cost along the battery value chain are required, while other key performance indicators, such as lifetime, safety, fast-charging ability and low-temperature performance, need to be enhanced or at least sustained. Here, we review advances and challenges in LIB materials for automotive applications, in particular with respect to cost and performance parameters. The production processes of anode and cathode materials are discussed, focusing on material abundance and cost. Advantages and challenges of different types of electrolyte for automotive batteries are examined. Finally, energy densities and costs of promising battery chemistries are critically evaluated along with an assessment of the potential to fulfil the ambitious targets of electric vehicle propulsion.

Notes from the field: the economic value chain in disease management organizations.

PubMed

Fetterolf, Donald

2006-12-01

The disease management (DM) "value chain" is composed of a linear series of steps that include operational milestones in the development of knowledge, each stage evolving from the preceding one. As an adaptation of Michael Porter's "value chain" model, the process flow in DM moves along the following path: (1) data/information technology, (2) information generation, (3) analysis, (4) assessment/recommendations, (5) actionable customer plan, and (6) program assessment/reassessment. Each of these stages is managed as a major line of product operations within a DM company or health plan. Metrics around each of the key production variables create benchmark milestones, ongoing management insight into program effectiveness, and potential drivers for activity-based cost accounting pricing models. The value chain process must remain robust from early entry of data and information into the system, through the final presentation and recommendations for our clients if the program is to be effective. For individuals involved in the evaluation or review of DM programs, this framework is an excellent method to visualize the key components and sequence in the process. The value chain model is an excellent way to establish the value of a formal DM program and to create a consultancy relationship with a client involved in purchasing these complex services.

Is it worth changing pattern recognition methods for structural health monitoring?

NASA Astrophysics Data System (ADS)

Bull, L. A.; Worden, K.; Cross, E. J.; Dervilis, N.

2017-05-01

The key element of this work is to demonstrate alternative strategies for using pattern recognition algorithms whilst investigating structural health monitoring. This paper looks to determine if it makes any difference in choosing from a range of established classification techniques: from decision trees and support vector machines, to Gaussian processes. Classification algorithms are tested on adjustable synthetic data to establish performance metrics, then all techniques are applied to real SHM data. To aid the selection of training data, an informative chain of artificial intelligence tools is used to explore an active learning interaction between meaningful clusters of data.

Quantitative Measurements of HO2 and other products of n-butane oxidation (H2O2, H2O, CH2O, and C2H4) at elevated temperatures by direct coupling of a jet-stirred reactor with sampling nozzle and cavity ring-down spectroscopy (cw-CRDS).

PubMed

Djehiche, Mokhtar; Le Tan, Ngoc Linh; Jain, Chaithanya D; Dayma, Guillaume; Dagaut, Philippe; Chauveau, Christian; Pillier, Laure; Tomas, Alexandre

2014-11-26

For the first time quantitative measurements of the hydroperoxyl radical (HO2) in a jet-stirred reactor were performed thanks to a new experimental setup involving fast sampling and near-infrared cavity ring-down spectroscopy at low pressure. The experiments were performed at atmospheric pressure and over a range of temperatures (550-900 K) with n-butane, the simplest hydrocarbon fuel exhibiting cool flame oxidation chemistry which represents a key process for the auto-ignition in internal combustion engines. The same technique was also used to measure H2O2, H2O, CH2O, and C2H4 under the same conditions. This new setup brings new scientific horizons for characterizing complex reactive systems at elevated temperatures. Measuring HO2 formation from hydrocarbon oxidation is extremely important in determining the propensity of a fuel to follow chain-termination pathways from R + O2 compared to chain branching (leading to OH), helping to constrain and better validate detailed chemical kinetics models.

Comprehensive Study on Wastages of Supply Chain Information Sharing in Automotive Industries

NASA Astrophysics Data System (ADS)

Sendhil Kumar, R.; Pugazhendhi, S.; Muralidharan, C.; Murali, S.

2017-03-01

A supply chain is a very extensive concept, which encompasses many problems and features when it comes to controlling. Now a day’s lean concept is a very common method to several areas, such as service sectors and manufacturing. Applying the lean concept to supply chain management is a very popular study part, it has attracted many industrial practices and researchers with different applications. Information sharing and technology remain one of the key factors of integrating the supply chain members. Current scenario the competition is no longer between the competing companies, but it happens between the supply chains. So the efficiency of the supply chain is very important. And the effective sharing of information can enhance the supply chain efficiency through minimizing the inventories and Information sharing can increase supply chain efficiency by reducing inventories and stabilizing the production. This paper describes and discusses about the seven deadly wastes of supply chain information with the comparative principle of Toyota production system (TPS) principle approach. How the TPS can be applied to supply chain information sharing And lean tool of 5S concept possibility improve the information sharing.

A review of agent-based modeling approach in the supply chain collaboration context

NASA Astrophysics Data System (ADS)

Arvitrida, N. I.

2018-04-01

Collaboration is considered as the key aspect of supply chain management (SCM) success. This issue has been addressed by many studies in recent years, but there are still few research employs agent-based modeling (ABM) approach to study business partnerships in SCM. This paper reviews the use of ABM in modeling collaboration in supply chains and inform the scope of ABM application in the existing literature. The review reveals that ABM can be an effective tool to address various aspects in supply chain relationships, but its applications in SCM studies are still limited. Moreover, where ABM is applied in the SCM context, most of the studies focus on software architecture rather than analyzing the supply chain issues. This paper also provides insights to SCM researchers about the opportunity uses of ABM in studying complexity in supply chain collaboration.

Nonsimultaneous chains and dominos in kidney- paired donation-revisited.

PubMed

Ashlagi, I; Gilchrist, D S; Roth, A E; Rees, M A

2011-05-01

Since 2008, kidney exchange in America has grown in part from the incorporation of nondirected donors in transplant chains rather than simple exchanges. It is controversial whether these chains should be performed simultaneously 'domino-paired donation', (DPD) or nonsimultaneously 'nonsimultaneous extended altruistic donor, chains (NEAD). NEAD chains create 'bridge donors' whose incompatible recipients receive kidneys before the bridge donor donates, and so risk reneging by bridge donors, but offer the opportunity to create more transplants by overcoming logistical barriers inherent in simultaneous chains. Gentry et al. simulated whether DPD or NEAD chains would produce more transplants when chain segment length was limited to three transplants, and reported that DPD performed at least as well as NEAD chains. As this finding contrasts with the experience of several groups involved in kidney-paired donation, we performed simulations that allowed for longer chain segments and used actual patient data from the Alliance for Paired Donation. When chain segments of 4-6 transplants are allowed in the simulations, NEAD chains produce more transplants than DPD. Our simulations showed not only more transplants as chain length increased, but also that NEAD chains produced more transplants for highly sensitized and blood type O recipients. ©2011 The Authors Journal compilation©2011 The American Society of Transplantation and the American Society of Transplant Surgeons.

The world's nuclear future - built on material success

NASA Astrophysics Data System (ADS)

Ion, Sue

2010-07-01

In our energy hungry world of the twenty-first century, the future of electricity generation must meet the twin challenges of security of supply and reduced carbon emissions. The expectations for nuclear power programmes to play a part in delivering success on both counts, grows ever higher. The nuclear industry is poised on a renaissance likely to dwarf the heady days of the 1960s and early 1970s. Global supply chain and project management challenges abound, now just as then. The science and engineering of materials will be key to the successful deployment and operation of a new generation of reactor systems and their associated fuel cycles. Understanding and predicting materials performance will be key to achieving life extension of existing assets and underpinning waste disposal options, as well as giving confidence to the designers, their financial backers and governments across the globe, that the next generation of reactors will deliver their full potential.

Microbial quantification in activated sludge: the hits and misses.

PubMed

Hall, S J; Keller, J; Blackall, L L

2003-01-01

Since the implementation of the activated sludge process for treating wastewater, there has been a reliance on chemical and physical parameters to monitor the system. However, in biological nutrient removal (BNR) processes, the microorganisms responsible for some of the transformations should be used to monitor the processes with the overall goal to achieve better treatment performance. The development of in situ identification and rapid quantification techniques for key microorganisms involved in BNR are required to achieve this goal. This study explored the quantification of Nitrospira, a key organism in the oxidation of nitrite to nitrate in BNR. Two molecular genetic microbial quantification techniques were evaluated: real-time polymerase chain reaction (PCR) and fluorescence in situ hybridisation (FISH) followed by digital image analysis. A correlation between the Nitrospira quantitative data and the nitrate production rate, determined in batch tests, was attempted. The disadvantages and advantages of both methods will be discussed.

The Homeobox Protein CEH-23 Mediates Prolonged Longevity in Response to Impaired Mitochondrial Electron Transport Chain in C. elegans

PubMed Central

Walter, Ludivine; Baruah, Aiswarya; Chang, Hsin-Wen; Pace, Heather Mae; Lee, Siu Sylvia

2011-01-01

Recent findings indicate that perturbations of the mitochondrial electron transport chain (METC) can cause extended longevity in evolutionarily diverse organisms. To uncover the molecular basis of how altered METC increases lifespan in C. elegans, we performed an RNAi screen and revealed that three predicted transcription factors are specifically required for the extended longevity of mitochondrial mutants. In particular, we demonstrated that the nuclear homeobox protein CEH-23 uniquely mediates the longevity but not the slow development, reduced brood size, or resistance to oxidative stress associated with mitochondrial mutations. Furthermore, we showed that ceh-23 expression levels are responsive to altered METC, and enforced overexpression of ceh-23 is sufficient to extend lifespan in wild-type background. Our data point to mitochondria-to-nucleus communications to be key for longevity determination and highlight CEH-23 as a novel longevity factor capable of responding to mitochondrial perturbations. These findings provide a new paradigm for how mitochondria impact aging and age-dependent diseases. PMID:21713031

Ablation of Steroid Receptor Coactivator-3 resembles the human CACT metabolic myopathy

PubMed Central

York, Brian; Reineke, Erin L.; Sagen, Jørn V.; Nikolai, Bryan C.; Zhou, Suoling; Louet, Jean-Francois; Chopra, Atul R.; Chen, Xian; Reed, Graham; Noebels, Jeffrey; Adesina, Adekunle M.; Yu, Hui; Wong, Lee-Jun C.; Tsimelzon, Anna; Hilsenbeck, Susan; Stevens, Robert D.; Wenner, Brett R.; Ilkayeva, Olga; Xu, Jianming; Newgard, Christopher B.; O’Malley, Bert W.

2012-01-01

Summary Oxidation of lipid substrates is essential for survival in fasting and other catabolic conditions, sparing glucose for the brain and other glucose-dependent tissues. Here we show Steroid Receptor Coactivator-3 (SRC-3) plays a central role in long chain fatty acid metabolism by directly regulating carnitine/acyl-carnitine translocase (CACT) gene expression. Genetic deficiency of CACT in humans is accompanied by a constellation of metabolic and toxicity phenotypes including hypoketonemia, hypoglycemia, hyperammonemia, and impaired neurologic, cardiac and skeletal muscle performance, each of which is apparent in mice lacking SRC-3 expression. Consistent with human cases of CACT deficiency, dietary rescue with short chain fatty acids drastically attenuates the clinical hallmarks of the disease in mice devoid of SRC-3. Collectively, our results position SRC-3 as a key regulator of β-oxidation. Moreover, these findings allow us to consider platform coactivators such as the SRCs as potential contributors to syndromes such as CACT deficiency, previously considered as monogenic. PMID:22560224

Automatic comic page image understanding based on edge segment analysis

NASA Astrophysics Data System (ADS)

Liu, Dong; Wang, Yongtao; Tang, Zhi; Li, Luyuan; Gao, Liangcai

2013-12-01

Comic page image understanding aims to analyse the layout of the comic page images by detecting the storyboards and identifying the reading order automatically. It is the key technique to produce the digital comic documents suitable for reading on mobile devices. In this paper, we propose a novel comic page image understanding method based on edge segment analysis. First, we propose an efficient edge point chaining method to extract Canny edge segments (i.e., contiguous chains of Canny edge points) from the input comic page image; second, we propose a top-down scheme to detect line segments within each obtained edge segment; third, we develop a novel method to detect the storyboards by selecting the border lines and further identify the reading order of these storyboards. The proposed method is performed on a data set consisting of 2000 comic page images from ten printed comic series. The experimental results demonstrate that the proposed method achieves satisfactory results on different comics and outperforms the existing methods.

Characterizing the Trade Space Between Capability and Complexity in Next Generation Cloud and Precipitation Observing Systems Using Markov Chain Monte Carlos Techniques

NASA Astrophysics Data System (ADS)

Xu, Z.; Mace, G. G.; Posselt, D. J.

2017-12-01

As we begin to contemplate the next generation atmospheric observing systems, it will be critically important that we are able to make informed decisions regarding the trade space between scientific capability and the need to keep complexity and cost within definable limits. To explore this trade space as it pertains to understanding key cloud and precipitation processes, we are developing a Markov Chain Monte Carlo (MCMC) algorithm suite that allows us to arbitrarily define the specifications of candidate observing systems and then explore how the uncertainties in key retrieved geophysical parameters respond to that observing system. MCMC algorithms produce a more complete posterior solution space, and allow for an objective examination of information contained in measurements. In our initial implementation, MCMC experiments are performed to retrieve vertical profiles of cloud and precipitation properties from a spectrum of active and passive measurements collected by aircraft during the ACE Radiation Definition Experiments (RADEX). Focusing on shallow cumulus clouds observed during the Integrated Precipitation and Hydrology EXperiment (IPHEX), observing systems in this study we consider W and Ka-band radar reflectivity, path-integrated attenuation at those frequencies, 31 and 94 GHz brightness temperatures as well as visible and near-infrared reflectance. By varying the sensitivity and uncertainty of these measurements, we quantify the capacity of various combinations of observations to characterize the physical properties of clouds and precipitation.

Large Spatial Scale Ground Displacement Mapping through the P-SBAS Processing of Sentinel-1 Data on a Cloud Computing Environment

NASA Astrophysics Data System (ADS)

Casu, F.; Bonano, M.; de Luca, C.; Lanari, R.; Manunta, M.; Manzo, M.; Zinno, I.

2017-12-01

Since its launch in 2014, the Sentinel-1 (S1) constellation has played a key role on SAR data availability and dissemination all over the World. Indeed, the free and open access data policy adopted by the European Copernicus program together with the global coverage acquisition strategy, make the Sentinel constellation as a game changer in the Earth Observation scenario. Being the SAR data become ubiquitous, the technological and scientific challenge is focused on maximizing the exploitation of such huge data flow. In this direction, the use of innovative processing algorithms and distributed computing infrastructures, such as the Cloud Computing platforms, can play a crucial role. In this work we present a Cloud Computing solution for the advanced interferometric (DInSAR) processing chain based on the Parallel SBAS (P-SBAS) approach, aimed at processing S1 Interferometric Wide Swath (IWS) data for the generation of large spatial scale deformation time series in efficient, automatic and systematic way. Such a DInSAR chain ingests Sentinel 1 SLC images and carries out several processing steps, to finally compute deformation time series and mean deformation velocity maps. Different parallel strategies have been designed ad hoc for each processing step of the P-SBAS S1 chain, encompassing both multi-core and multi-node programming techniques, in order to maximize the computational efficiency achieved within a Cloud Computing environment and cut down the relevant processing times. The presented P-SBAS S1 processing chain has been implemented on the Amazon Web Services platform and a thorough analysis of the attained parallel performances has been performed to identify and overcome the major bottlenecks to the scalability. The presented approach is used to perform national-scale DInSAR analyses over Italy, involving the processing of more than 3000 S1 IWS images acquired from both ascending and descending orbits. Such an experiment confirms the big advantage of exploiting large computational and storage resources of Cloud Computing platforms for large scale DInSAR analysis. The presented Cloud Computing P-SBAS processing chain can be a precious tool in the perspective of developing operational services disposable for the EO scientific community related to hazard monitoring and risk prevention and mitigation.

A Model of Risk Analysis in Analytical Methodology for Biopharmaceutical Quality Control.

PubMed

Andrade, Cleyton Lage; Herrera, Miguel Angel De La O; Lemes, Elezer Monte Blanco

2018-01-01

One key quality control parameter for biopharmaceutical products is the analysis of residual cellular DNA. To determine small amounts of DNA (around 100 pg) that may be in a biologically derived drug substance, an analytical method should be sensitive, robust, reliable, and accurate. In principle, three techniques have the ability to measure residual cellular DNA: radioactive dot-blot, a type of hybridization; threshold analysis; and quantitative polymerase chain reaction. Quality risk management is a systematic process for evaluating, controlling, and reporting of risks that may affects method capabilities and supports a scientific and practical approach to decision making. This paper evaluates, by quality risk management, an alternative approach to assessing the performance risks associated with quality control methods used with biopharmaceuticals, using the tool hazard analysis and critical control points. This tool provides the possibility to find the steps in an analytical procedure with higher impact on method performance. By applying these principles to DNA analysis methods, we conclude that the radioactive dot-blot assay has the largest number of critical control points, followed by quantitative polymerase chain reaction, and threshold analysis. From the analysis of hazards (i.e., points of method failure) and the associated method procedure critical control points, we conclude that the analytical methodology with the lowest risk for performance failure for residual cellular DNA testing is quantitative polymerase chain reaction. LAY ABSTRACT: In order to mitigate the risk of adverse events by residual cellular DNA that is not completely cleared from downstream production processes, regulatory agencies have required the industry to guarantee a very low level of DNA in biologically derived pharmaceutical products. The technique historically used was radioactive blot hybridization. However, the technique is a challenging method to implement in a quality control laboratory: It is laborious, time consuming, semi-quantitative, and requires a radioisotope. Along with dot-blot hybridization, two alternatives techniques were evaluated: threshold analysis and quantitative polymerase chain reaction. Quality risk management tools were applied to compare the techniques, taking into account the uncertainties, the possibility of circumstances or future events, and their effects upon method performance. By illustrating the application of these tools with DNA methods, we provide an example of how they can be used to support a scientific and practical approach to decision making and can assess and manage method performance risk using such tools. This paper discusses, considering the principles of quality risk management, an additional approach to the development and selection of analytical quality control methods using the risk analysis tool hazard analysis and critical control points. This tool provides the possibility to find the method procedural steps with higher impact on method reliability (called critical control points). Our model concluded that the radioactive dot-blot assay has the larger number of critical control points, followed by quantitative polymerase chain reaction and threshold analysis. Quantitative polymerase chain reaction is shown to be the better alternative analytical methodology in residual cellular DNA analysis. © PDA, Inc. 2018.

Effects of Variable Resistance Using Chains on Bench Throw Performance in Trained Rugby Players.

PubMed

Godwin, Mark S; Fernandes, John F T; Twist, Craig

2018-04-01

Godwin, MS, Fernandes, JFT, and Twist, C. Effects of variable resistance using chains on bench throw performance in trained rugby players. J Strength Cond Res 32(4): 950-954, 2018-This study sought to determine the effects of variable resistance using chain resistance on bench throw performance. Eight male rugby union players (19.4 ± 2.3 years, 88.8 ± 6.0 kg, 1RM 105.6 ± 17.0 kg) were recruited from a national league team. In a randomized crossover design, participant's performed 3 bench throws at 45% one repetition maximum (1RM) at a constant load (no chains) or a variable load (30% 1RM constant load and 15% 1RM variable load; chains) with 7 days between conditions. For each repetition, the peak and mean velocity, peak power, peak acceleration, and time to peak velocity were recorded. Differences in peak and mean power were very likely trivial and unclear between the chain and no chain conditions, respectively. Possibly greater peak and likely greater mean bar velocity were accompanied by likely to most likely greater bar velocity between 50 and 400 ms from initiation of bench press in the chain condition compared with the no chain condition. Accordingly, bar acceleration was very likely greater in the chain condition compared with the no chain condition. In conclusion, these results show that the inclusion of chain resistance can acutely enhance several variables in the bench press throw and gives support to this type of training.

Tunneling conductance of amine-linked alkyl chains.

PubMed

Prodan, Emil; Car, Roberto

2008-06-01

The tunneling transport theory developed in ref 9 (Phys. Rev. B 2007, 76, 115102) is applied to molecular devices made of alkyl chains linked to gold electrodes via amine groups. Using the analytic expression of the tunneling conductance derived in our previous work, we identify the key physical quantities that characterize the conductance of these devices. By investigating the transport characteristics of three devices, containing four, six, and eight methyl groups, we extract the dependence of the tunneling conductance on the chain's length, which is an exponential decay law in agreement with recent experimental data.

Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

NASA Astrophysics Data System (ADS)

Kongar, N. Elif

2004-12-01

Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

Influence of green supply chain risk management on performance of Chinese manufacturing enterprises

NASA Astrophysics Data System (ADS)

Zhang, Dongying; Yuting, Duan; Junyi, Shen

2017-12-01

This paper briefly introduces the background of the research on the impact of green supply chain risk management on corporate performance, reviews the relevant research literature at home and abroad, and uses the gray relational analysis to analyze the impact of the green supply chain risk management on enterprise performance based on 26 industry-related statistical data, from purchasing risk management performance,manufacturing risk management performance and marketing risk management performance.

The surprising dynamics of a chain on a pulley: lift off and snapping

PubMed Central

Audoly, Basile

2016-01-01

The motion of weights attached to a chain or string moving on a frictionless pulley is a classic problem of introductory physics used to understand the relationship between force and acceleration. Here, we consider the dynamics of the chain when one of the weights is removed and, thus, one end is pulled with constant acceleration. This simple change has dramatic consequences for the ensuing motion: at a finite time, the chain ‘lifts off’ from the pulley, and the free end subsequently accelerates faster than the end that is pulled. Eventually, the chain undergoes a dramatic reversal of curvature reminiscent of the crack or snap, of a whip. We combine experiments, numerical simulations and theoretical arguments to explain key aspects of this dynamical problem. PMID:27436987

The Complexities of Implementing Cluster Supply Chain - Case Study of JCH

NASA Astrophysics Data System (ADS)

Xue, Xiao; Zhang, Jibiao; Wang, Yang

As a new type of management pattern, "cluster supply chain" (CSC) can help SMEs to face the global challenges through all kinds of collaboration. However, a major challenge in implementing CSC is the gap between theory and practice in the field. In an effort to provide a better understanding of this emerging phenomenon, this paper presents the implementation process of CSC in the context of JingCheng Mechanical & Electrical Holding co., ltd.(JCH) as a case study. The cast study of JCH suggests that the key problems in the practice of cluster supply chain: How do small firms use cluster supply chain? Only after we clarify the problem, the actual construction and operation of cluster supply chain does show successful results as it should be.

The surprising dynamics of a chain on a pulley: lift off and snapping.

PubMed

Brun, P-T; Audoly, Basile; Goriely, Alain; Vella, Dominic

2016-06-01

The motion of weights attached to a chain or string moving on a frictionless pulley is a classic problem of introductory physics used to understand the relationship between force and acceleration. Here, we consider the dynamics of the chain when one of the weights is removed and, thus, one end is pulled with constant acceleration. This simple change has dramatic consequences for the ensuing motion: at a finite time, the chain 'lifts off' from the pulley, and the free end subsequently accelerates faster than the end that is pulled. Eventually, the chain undergoes a dramatic reversal of curvature reminiscent of the crack or snap, of a whip. We combine experiments, numerical simulations and theoretical arguments to explain key aspects of this dynamical problem.

A study on the genus Stenus Latreille from Tianmushan Mountain Chain of East China (Coleoptera, Staphylinidae).

PubMed

Tang, Liang; Puthz, Volker; Yue, Yan-Li

2016-09-26

The species of the genus Stenus Latreille from Tianmushan Mountain Chain, North Zhejiang, East China, are reviewed and three new species are described: S. tianmushanus sp. n., S. tonghanggangus sp. n., and S. pseudomicuba sp. n. Diagnostic characters of the new species are illustrated and a key to species of the area is provided.

Evaluation of a Modified Atmosphere Packaging System to Increase Fresh Fruit and Vegetable Shelf Life for Extended Military Supply Chains

DTIC Science & Technology

2012-02-24

Three key items – iceberg lettuce, romaine lettuce, and broccoli crowns – were tested in the Pacific Region Guam supply chain. Due to longer total...7 2.1.1 Extra Apio Broccoli for Test Shipments 2 and 3 ................................................8 2.2 Test...49 3.3 Broccoli Crowns .............................................................................................................49 3.3.1

Is decentralization good for logistics systems? Evidence on essential medicine logistics in Ghana and Guatemala.

PubMed

Bossert, Thomas J; Bowser, Diana M; Amenyah, Johnnie K

2007-03-01

Efficient logistics systems move essential medicines down the supply chain to the service delivery point, and then to the end user. Experts on logistics systems tend to see the supply chain as requiring centralized control to be most effective. However, many health reforms have involved decentralization, which experts fear has disrupted the supply chain and made systems less effective. There is no consensus on an appropriate methodology for assessing the effectiveness of decentralization in general, and only a few studies have attempted to address decentralization of logistics systems. This paper sets out a framework and methodology of a pioneering exploratory study that examines the experiences of decentralization in two countries, Guatemala and Ghana, and presents suggestive results of how decentralization affected the performance of their logistics systems. The analytical approach assessed decentralization using the principal author's 'decision space' approach, which defines decentralization as the degree of choice that local officials have over different health system functions. In this case the approach focused on 15 different logistics functions and measured the relationship between the degree of choice and indicators of performance for each of the functions. The results of both studies indicate that less choice (i.e. more centralized) was associated with better performance for two key functions (inventory control and information systems), while more choice (i.e. more decentralized) over planning and budgeting was associated with better performance. With different systems of procurement in Ghana and Guatemala, we found that a system with some elements of procurement that are centralized (selection of firms and prices fixed by national tender) was positively related in Guatemala but negatively related in Ghana, where a system of 'cash and carry' cost recovery allowed more local choice. The authors conclude that logistics systems can be effectively decentralized for some functions while others should remain centralized. These preliminary findings, however, should be subject to alternative methodologies to confirm the findings.

Analytical expressions for the closure probability of a stiff wormlike chain for finite capture radius.

PubMed

Guérin, T

2017-08-01

Estimating the probability that two monomers of the same polymer chain are close together is a key ingredient to characterize intramolecular reactions and polymer looping. In the case of stiff wormlike polymers (rigid fluctuating elastic rods), for which end-to-end encounters are rare events, we derive an explicit analytical formula for the probability η(r_{c}) that the distance between the chain extremities is smaller than some capture radius r_{c}. The formula is asymptotically exact in the limit of stiff chains, and it leads to the identification of two distinct scaling regimes for the closure factor, originating from a strong variation of the fluctuations of the chain orientation at closure. Our theory is compatible with existing analytical results from the literature that cover the cases of a vanishing capture radius and of nearly fully extended chains.

Global value chains and agrifood standards: Challenges and possibilities for smallholders in developing countries

PubMed Central

Lee, Joonkoo; Gereffi, Gary; Beauvais, Janet

2012-01-01

The rise of private food standards has brought forth an ongoing debate about whether they work as a barrier for smallholders and hinder poverty reduction in developing countries. This paper uses a global value chain approach to explain the relationship between value chain structure and agrifood safety and quality standards and to discuss the challenges and possibilities this entails for the upgrading of smallholders. It maps four potential value chain scenarios depending on the degree of concentration in the markets for agrifood supply (farmers and manufacturers) and demand (supermarkets and other food retailers) and discusses the impact of lead firms and key intermediaries on smallholders in different chain situations. Each scenario is illustrated with case examples. Theoretical and policy issues are discussed, along with proposals for future research in terms of industry structure, private governance, and sustainable value chains. PMID:21149723

Modification of Side Chains of Conjugated Molecules and Polymers for Charge Mobility Enhancement and Sensing Functionality.

PubMed

Liu, Zitong; Zhang, Guanxin; Zhang, Deqing

2018-06-19

Organic semiconductors have received increasing attentions in recent years because of their promising applications in various optoelectronic devices. The key performance metric for organic semiconductors is charge carrier mobility, which is governed by the electronic structures of conjugated backbones and intermolecular/interchain π-π interactions and packing in both microscopic and macroscopic levels. For this reason, more efforts have been paid to the design and synthesis of conjugated frameworks for organic semiconductors with high charge mobilities. However, recent studies manifest that appropriate modifications of side chains that are linked to conjugated frameworks can improve the intermolecular/interchain packing order and boost charge mobilities. In this Account, we discuss our research results in context of modification of side chains in organic semiconductors for charge mobility enhancement. These include the following: (i) The lengths of alkyl chains in sulfur-rich thiepin-fused heteroacences can dramatically influence the intermolecular arrangements and orbital overlaps, ushering in different hole mobilities. Inversely, the lamellar stacking modes of alkyl chains in naphthalene diimide (NDI) derivatives with tetrathiafulvalene (TTF) units are affected by the structures of conjugated cores. (ii) The steric hindrances owing to the bulky branching chains can be weakened by partial replacement of the branching alkyl chains with linear ones for diketopyrrolopyrrole (DPP)-based D (donor)-A (acceptor) conjugated polymers. Such modification of side chains makes the polymer backbones more planar and thus interchain packing order and charge mobilities are improved. The incorporation of hydrophilic tri(ethylene glycol) (TEG) chains into the polymers also leads to improved interchain packing order. In particular, the polymer in which TEG side chains are distributed uniformly exhibits relatively high charge mobility without thermal annealing. (iii) The incorporation of urea groups in the side chains induces the polymer chains to pack more orderly and form large domains because of the additional H-bonding among urea groups. Accordingly, thin film mobilities of the conjugated D-A polymers with side chains entailing urea groups are largely boosted in comparison with those of polymers of the same backbones with either branching alkyl chains or branching/linear alkyl chains. (iv) The torsions of branching alkyl chains in conjugated D-A polymers can be inhibited to some extent upon incorporation of tiny amount of NMe 4 I in the thin film. As a result, the polymer thin films with NMe 4 I exhibit improved crystallinity, and charge mobilities can be boosted by more than 20 times. (v) Side chains with functional groups in the conjugated polymers can endow the thin film field-effect transistors (FETs) with sensing functionality. FETs with the conjugated polymer with -COOH groups in the side chains show sensitive, selective, and fast responses toward ammonia and amines, while FETs with the ultrathin films of the polymer containing tetra(ethylene glycol) (TEEG) in the side chains can sense alcohol vapors (in particular ethanol vapor) sensitively and selectively with fast response.

Beyond upgrading typologies – In search of a better deal for honey value chains in Brazil

PubMed Central

Meuwissen, Miranda P. M.; van der Lans, Ivo A.; Oude Lansink, Alfons G. J. M.

2017-01-01

Selection of value chain strategies by development practitioners and value chain participants themselves has been restricted to preset types of upgrading. This paper argues for an extension of the range of strategy solutions to value chains. An empirical application identifies successful strategies for honey value chains in Brazil for 2015–2020. Strategy and performance indicators were selected using the value chain Structure-Conduct-Performance (SCP) framework. Experts’ opinion was elicited in a Delphi for business scenarios, and adaptive conjoint analysis was used to identify strategies for increasing production growth and local value-added. This study identifies important strategies beyond upgrading typologies, and finds that important strategies differ by performance goal and scenario. The value chain SCP allows searching for promising strategies towards performance–the “better deal”–in an integrated way. PMID:28742804

Factors Affecting Availability of Essential Medicines among Community Health Workers in Ethiopia, Malawi, and Rwanda: Solving the Last Mile Puzzle

PubMed Central

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K.; Williams, Timothy

2012-01-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation. PMID:23136287

Factors affecting availability of essential medicines among community health workers in Ethiopia, Malawi, and Rwanda: solving the last mile puzzle.

PubMed

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K; Williams, Timothy

2012-11-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation.

Future Supply Chains Enabled by Continuous Processing—Opportunities and Challenges. May 20–21, 2014 Continuous Manufacturing Symposium

PubMed Central

Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig

2015-01-01

This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily “continuous processing”-based supply chain. The current predominantly “large batch” and centralized manufacturing system designed for the “blockbuster” drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more “flow-through” operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational performance in pharma is far from optimal and not necessarily an appropriate end-state benchmark for batch technology, the adoption of continuous supply chain operating models underpinned by continuous production processing, as full or hybrid solutions in selected product supply chains, can support industry transformations to deliver right-first-time quality at substantially lower inventory profiles. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:840–849, 2015 PMID:25631279

Isolation and Composition Analysis of Bioactive Glycosaminoglycans from Whelk.

PubMed

Khurshid, Chrow; Pye, David Alexander

2018-05-18

Glycosaminoglycans (GAGs) are found covalently attached to proteins, which create conjugates known as proteoglycans. GAGs have remarkable biological activity as co-receptors for a variety of growth factors, cytokines, and chemokines. The present study identifies the key compositional differences between the GAGs isolated from whelk and mammalian GAGs. This polysaccharide represents a new, previously undescribed GAG with cytotoxic activity on cancer cells. Disaccharides were obtained by sample digestion with heparinases I, II, and III and chondroitinase ABC. The resistant oligosaccharides from whelk GAGs treated with heparinase I, II, and III and chondroitinase ABC were retained by the filter due to their larger size. Disaccharide analysis was performed using Glycan Reduction Isotope Labeling (GRIL LCQ-MS). The amounts of filter-retained fragments, as assessed by monosaccharides analysis, suggested that a proportion of the whelk GAG chains remained resistant to the enzymes used in the disaccharide analysis. Thus, the proportions of individual disaccharide produced in this analysis may not truly represent the overall proportions of disaccharide types within the intact whelk GAGs chain. However, they do serve as important descriptors for the classification and make-up of the anti-cancer GAGs chains. Furthermore, these data represent clear evidence of the compositional differences between whelk GAGs and commercial mammalian GAGs.

Isolation and Composition Analysis of Bioactive Glycosaminoglycans from Whelk

PubMed Central

Khurshid, Chrow; Pye, David Alexander

2018-01-01

Glycosaminoglycans (GAGs) are found covalently attached to proteins, which create conjugates known as proteoglycans. GAGs have remarkable biological activity as co-receptors for a variety of growth factors, cytokines, and chemokines. The present study identifies the key compositional differences between the GAGs isolated from whelk and mammalian GAGs. This polysaccharide represents a new, previously undescribed GAG with cytotoxic activity on cancer cells. Disaccharides were obtained by sample digestion with heparinases I, II, and III and chondroitinase ABC. The resistant oligosaccharides from whelk GAGs treated with heparinase I, II, and III and chondroitinase ABC were retained by the filter due to their larger size. Disaccharide analysis was performed using Glycan Reduction Isotope Labeling (GRIL LCQ-MS). The amounts of filter-retained fragments, as assessed by monosaccharides analysis, suggested that a proportion of the whelk GAG chains remained resistant to the enzymes used in the disaccharide analysis. Thus, the proportions of individual disaccharide produced in this analysis may not truly represent the overall proportions of disaccharide types within the intact whelk GAGs chain. However, they do serve as important descriptors for the classification and make-up of the anti-cancer GAGs chains. Furthermore, these data represent clear evidence of the compositional differences between whelk GAGs and commercial mammalian GAGs. PMID:29783688

Evaluation of revised polymerase chain reaction primers for more inclusive quantification of ammonia-oxidizing archaea and bacteria.

PubMed

Meinhardt, Kelley A; Bertagnolli, Anthony; Pannu, Manmeet W; Strand, Stuart E; Brown, Sally L; Stahl, David A

2015-04-01

Ammonia-oxidizing archaea (AOA) and bacteria (AOB) fill key roles in the nitrogen cycle. Thus, well-vetted methods for characterizing their distribution are essential for framing studies of their significance in natural and managed systems. Quantification of the gene coding for one subunit of the ammonia monooxygenase (amoA) by polymerase chain reaction is frequently employed to enumerate the two groups. However, variable amplification of sequence variants comprising this conserved genetic marker for ammonia oxidizers potentially compromises within- and between-system comparisons. We compared the performance of newly designed non-degenerate quantitative polymerase chain reaction primer sets to existing primer sets commonly used to quantify the amoA of AOA and AOB using a collection of plasmids and soil DNA samples. The new AOA primer set provided improved quantification of model mixtures of different amoA sequence variants and increased detection of amoA in DNA recovered from soils. Although both primer sets for the AOB provided similar results for many comparisons, the new primers demonstrated increased detection in environmental application. Thus, the new primer sets should provide a useful complement to primers now commonly used to characterize the environmental distribution of AOA and AOB. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

Toward tailoring Majorana bound states in artificially constructed magnetic atom chains on elemental superconductors

PubMed Central

Thorwart, Michael

2018-01-01

Realizing Majorana bound states (MBS) in condensed matter systems is a key challenge on the way toward topological quantum computing. As a promising platform, one-dimensional magnetic chains on conventional superconductors were theoretically predicted to host MBS at the chain ends. We demonstrate a novel approach to design of model-type atomic-scale systems for studying MBS using single-atom manipulation techniques. Our artificially constructed atomic Fe chains on a Re surface exhibit spin spiral states and a remarkable enhancement of the local density of states at zero energy being strongly localized at the chain ends. Moreover, the zero-energy modes at the chain ends are shown to emerge and become stabilized with increasing chain length. Tight-binding model calculations based on parameters obtained from ab initio calculations corroborate that the system resides in the topological phase. Our work opens new pathways to design MBS in atomic-scale hybrid structures as a basis for fault-tolerant topological quantum computing. PMID:29756034

Toward tailoring Majorana bound states in artificially constructed magnetic atom chains on elemental superconductors.

PubMed

Kim, Howon; Palacio-Morales, Alexandra; Posske, Thore; Rózsa, Levente; Palotás, Krisztián; Szunyogh, László; Thorwart, Michael; Wiesendanger, Roland

2018-05-01

Realizing Majorana bound states (MBS) in condensed matter systems is a key challenge on the way toward topological quantum computing. As a promising platform, one-dimensional magnetic chains on conventional superconductors were theoretically predicted to host MBS at the chain ends. We demonstrate a novel approach to design of model-type atomic-scale systems for studying MBS using single-atom manipulation techniques. Our artificially constructed atomic Fe chains on a Re surface exhibit spin spiral states and a remarkable enhancement of the local density of states at zero energy being strongly localized at the chain ends. Moreover, the zero-energy modes at the chain ends are shown to emerge and become stabilized with increasing chain length. Tight-binding model calculations based on parameters obtained from ab initio calculations corroborate that the system resides in the topological phase. Our work opens new pathways to design MBS in atomic-scale hybrid structures as a basis for fault-tolerant topological quantum computing.

Integrated strategic and tactical biomass-biofuel supply chain optimization.

PubMed

Lin, Tao; Rodríguez, Luis F; Shastri, Yogendra N; Hansen, Alan C; Ting, K C

2014-03-01

To ensure effective biomass feedstock provision for large-scale biofuel production, an integrated biomass supply chain optimization model was developed to minimize annual biomass-ethanol production costs by optimizing both strategic and tactical planning decisions simultaneously. The mixed integer linear programming model optimizes the activities range from biomass harvesting, packing, in-field transportation, stacking, transportation, preprocessing, and storage, to ethanol production and distribution. The numbers, locations, and capacities of facilities as well as biomass and ethanol distribution patterns are key strategic decisions; while biomass production, delivery, and operating schedules and inventory monitoring are key tactical decisions. The model was implemented to study Miscanthus-ethanol supply chain in Illinois. The base case results showed unit Miscanthus-ethanol production costs were $0.72L(-1) of ethanol. Biorefinery related costs accounts for 62% of the total costs, followed by biomass procurement costs. Sensitivity analysis showed that a 50% reduction in biomass yield would increase unit production costs by 11%. Copyright © 2014 Elsevier Ltd. All rights reserved.

Results-Based Financing in Mozambique's Central Medical Store: A Review After 1 Year.

PubMed

Spisak, Cary; Morgan, Lindsay; Eichler, Rena; Rosen, James; Serumaga, Brian; Wang, Angela

2016-03-01

Public health commodity supply chains are typically weak in low-income countries, partly because they have many disparate yet interdependent functions and components. Approaches to strengthening supply chains in such settings have often fallen short-they address technical weaknesses, but not the incentives that motivate staff to perform better. We reviewed the first year of a results-based financing (RBF) program in Mozambique, which began in January 2013. The program aimed to improve the performance of the central medical store-Central de Medicamentos e Artigos Medicos (CMAM)-by realigning incentives. We completed in-depth interviews and focus group discussions with 33 key informants, including representatives from CMAM and donor agencies, and collected quantitative data on performance measures and use of funds. The RBF agreement linked CMAM performance payments to quarterly results on 5 performance indicators related to supply planning, distribution planning, and warehouse management. RBF is predicated on the theory that a combination of carrot and stick-i.e., shared financial incentives, plus increased accountability for results-will spur changes in behavior. Important design elements: (1) indicators were measured against quarterly targets, and payments were made only for indicators that met those targets; (2) targets were set based on documented performance, at levels that could be reasonably attained, yet pushed for improvement; (3) payment was shared with and dependent on all staff, encouraging teamwork and collaboration; (4) results were validated by verifiable data sources; and (5) CMAM had discretion over how to use the funds. We found that CMAM's performance continually improved over baseline and that CMAM achieved many of its performance targets, for example, timely submission of quarterly supply and distribution planning reports. Warehouse indicators, such as inventory management and order fulfillment, proved more challenging but were nonetheless positive. By linking payments to periodic verified results, and giving CMAM discretion over how to spend the funds, the RBF agreement motivated the workforce; focused attention on results; strengthened data collection; encouraged teamwork and innovation; and ultimately strengthened the central supply chain. Policy makers and program managers can use performance incentives to catalyze and leverage existing investments. To further strengthen the approach, such incentive programs can shift attention from quantity to quality indicators, improve verification processes, and aim to institutionalize the approach. © Mukuria et al.

Results-Based Financing in Mozambique’s Central Medical Store: A Review After 1 Year

PubMed Central

Spisak, Cary; Morgan, Lindsay; Eichler, Rena; Rosen, James; Serumaga, Brian; Wang, Angela

2016-01-01

ABSTRACT Background: Public health commodity supply chains are typically weak in low-income countries, partly because they have many disparate yet interdependent functions and components. Approaches to strengthening supply chains in such settings have often fallen short—they address technical weaknesses, but not the incentives that motivate staff to perform better. Methods: We reviewed the first year of a results-based financing (RBF) program in Mozambique, which began in January 2013. The program aimed to improve the performance of the central medical store—Central de Medicamentos e Artigos Medicos (CMAM)—by realigning incentives. We completed in-depth interviews and focus group discussions with 33 key informants, including representatives from CMAM and donor agencies, and collected quantitative data on performance measures and use of funds. Implementation: The RBF agreement linked CMAM performance payments to quarterly results on 5 performance indicators related to supply planning, distribution planning, and warehouse management. RBF is predicated on the theory that a combination of carrot and stick—i.e., shared financial incentives, plus increased accountability for results—will spur changes in behavior. Important design elements: (1) indicators were measured against quarterly targets, and payments were made only for indicators that met those targets; (2) targets were set based on documented performance, at levels that could be reasonably attained, yet pushed for improvement; (3) payment was shared with and dependent on all staff, encouraging teamwork and collaboration; (4) results were validated by verifiable data sources; and (5) CMAM had discretion over how to use the funds. Findings: We found that CMAM’s performance continually improved over baseline and that CMAM achieved many of its performance targets, for example, timely submission of quarterly supply and distribution planning reports. Warehouse indicators, such as inventory management and order fulfillment, proved more challenging but were nonetheless positive. By linking payments to periodic verified results, and giving CMAM discretion over how to spend the funds, the RBF agreement motivated the workforce; focused attention on results; strengthened data collection; encouraged teamwork and innovation; and ultimately strengthened the central supply chain. Conclusion: Policy makers and program managers can use performance incentives to catalyze and leverage existing investments. To further strengthen the approach, such incentive programs can shift attention from quantity to quality indicators, improve verification processes, and aim to institutionalize the approach. PMID:27016552

Limiting Distributions of Functionals of Markov Chains.

DTIC Science & Technology

1984-08-01

limiting distributions; periodic * nonhomoger.,!ous Poisson processes . 19 ANS? MACY IConuui oe nonoe’ee if necorglooy and edern thty by block numbers...homogeneous Poisson processes is of interest in itself. The problem considered in this paper is of interest in the theory of partially observable...where we obtain the limiting distribution of the interevent times. Key Words: Markov Chains, Limiting Distributions, Periodic Nonhomogeneous Poisson

Brownian dynamics simulations of polyelectrolyte adsorption in shear flow with hydrodynamic interaction

NASA Astrophysics Data System (ADS)

Hoda, Nazish; Kumar, Satish

2007-12-01

The adsorption of single polyelectrolyte molecules in shear flow is studied using Brownian dynamics simulations with hydrodynamic interaction (HI). Simulations are performed with bead-rod and bead-spring chains, and electrostatic interactions are incorporated through a screened Coulombic potential with excluded volume accounted for by the repulsive part of a Lennard-Jones potential. A correction to the Rotne-Prager-Yamakawa tensor is derived that accounts for the presence of a planar wall. The simulations show that migration away from an uncharged wall, which is due to bead-wall HI, is enhanced by increases in the strength of flow and intrachain electrostatic repulsion, consistent with kinetic theory predictions. When the wall and polyelectrolyte are oppositely charged, chain behavior depends on the strength of electrostatic screening. For strong screening, chains get depleted from a region close to the wall and the thickness of this depletion layer scales as N1/3Wi2/3 at high Wi, where N is the chain length and Wi is the Weissenberg number. At intermediate screening, bead-wall electrostatic attraction competes with bead-wall HI, and it is found that there is a critical Weissenberg number for desorption which scales as N-1/2κ-3(lB∣σq∣)3/2, where κ is the inverse screening length, lB is the Bjerrum length, σ is the surface charge density, and q is the bead charge. When the screening is weak, adsorbed chains are observed to align in the vorticity direction at low shear rates due to the effects of repulsive intramolecular interactions. At higher shear rates, the chains align in the flow direction. The simulation method and results of this work are expected to be useful for a number of applications in biophysics and materials science in which polyelectrolyte adsorption plays a key role.

Stability of ecological industry chain: an entropy model approach.

PubMed

Wang, Qingsong; Qiu, Shishou; Yuan, Xueliang; Zuo, Jian; Cao, Dayong; Hong, Jinglan; Zhang, Jian; Dong, Yong; Zheng, Ying

2016-07-01

A novel methodology is proposed in this study to examine the stability of ecological industry chain network based on entropy theory. This methodology is developed according to the associated dissipative structure characteristics, i.e., complexity, openness, and nonlinear. As defined in the methodology, network organization is the object while the main focus is the identification of core enterprises and core industry chains. It is proposed that the chain network should be established around the core enterprise while supplementation to the core industry chain helps to improve system stability, which is verified quantitatively. Relational entropy model can be used to identify core enterprise and core eco-industry chain. It could determine the core of the network organization and core eco-industry chain through the link form and direction of node enterprises. Similarly, the conductive mechanism of different node enterprises can be examined quantitatively despite the absence of key data. Structural entropy model can be employed to solve the problem of order degree for network organization. Results showed that the stability of the entire system could be enhanced by the supplemented chain around the core enterprise in eco-industry chain network organization. As a result, the sustainability of the entire system could be further improved.

The Life Cycle Evaluation Model of External Diseconomy of Open-loop Supply Chain

NASA Astrophysics Data System (ADS)

Liu, Qian; Hu, Tianjun

2017-08-01

In recent years, with the continuous deterioration of pollution, resource space is gradually narrowed, the number of waste items increased, people began to use the method of recycling on waste products to ease the pressure on the environment. This paper adopted the external diseconomy of open-loop supply chain as the research object and constructed the model by the life cycle evaluation method, comparative analysis through the case. This paper also concludes that the key to solving the problem is to realize the closed-loop supply chain and building reverse logistics system is of great significance.

Business and continuity of operations: care of the critically ill and injured during pandemics and disasters: CHEST consensus statement.

PubMed

Tosh, Pritish K; Feldman, Henry; Christian, Michael D; Devereaux, Asha V; Kissoon, Niranjan; Dichter, Jeffrey R

2014-10-01

During disasters, supply chain vulnerabilities, such as power, transportation, and communication, may affect the delivery of medications and medical supplies and hamper the ability to deliver critical care services. Disasters also have the potential to disrupt information technology (IT) in health-care systems, resulting in interruptions in patient care, particularly critical care, and other health-care business functions. The suggestions in this article are important for all of those involved in a large-scale pandemic or disaster with multiple critically ill or injured patients, including front-line clinicians, hospital administrators, and public health or government officials. The Business and Continuity of Operations Panel followed the American College of Chest Physicians (CHEST) Guidelines Oversight Committee's methodology in developing key questions regarding medication and supply shortages and the impact disasters may have on healthcare IT. Task force members met in person to develop the 13 key questions believed to be most relevant for Business and Continuity of Operations. A systematic literature review was then performed for relevant articles and documents, reports, and gray literature reported since 2007. No studies of sufficient quality were identified upon which to make evidence-based recommendations. Therefore, the panel developed expert opinion-based suggestions using a modified Delphi process. Eighteen suggestions addressing mitigation strategies for supply chain vulnerabilities including medications and IT were generated. Suggestions offered to hospitals and health system leadership regarding medication and supply shortages include: (1) purchase key medications and supplies from more than one supplier, (2) substituted medications or supplies should ideally be similar to those already used by an institution's providers, (3) inventories should be tracked electronically to monitor medication/supply levels, (4) consider higher inventories of medications and supplies known or projected to be in short supply, (5) institute alternate use protocols when a (potential) shortage is identified, and 6) support government and nongovernmental organizations in efforts to address supply chain vulnerability. Health-care IT can be damaged in a disaster, and hospitals and health system leadership should have plans for urgently reestablishing local area networks. Planning should include using portable technology, plans for providing power, maintenance of a patient database that can accompany each patient, and protection of patient privacy. Additionally, long-term planning should include prioritizing servers and memory disk drives and possibly increasing inventory of critical IT supplies in preparedness planning. The provision of care to the critically ill or injured during a pandemic or disaster is dependent on key processes, such as the supply chain, and infrastructure, such as IT systems. Hospitals and health systems will help minimize the impact of medication and supply shortages with a focused strategy using the steps suggested. IT preparedness for maintaining local area networks, functioning clinical information systems, and adequate server and memory storage capacity will greatly enhance preparedness for hospital and health system clinical and business operations.

Business and Continuity of Operations

PubMed Central

Tosh, Pritish K.; Feldman, Henry; Christian, Michael D.; Devereaux, Asha V.; Kissoon, Niranjan; Christian, Michael D.; Devereaux, Asha V.; Dichter, Jeffrey R.; Kissoon, Niranjan; Rubinson, Lewis; Amundson, Dennis; Anderson, Michael R.; Balk, Robert; Barfield, Wanda D.; Bartz, Martha; Benditt, Josh; Beninati, William; Berkowitz, Kenneth A.; Daugherty Biddison, Lee; Braner, Dana; Branson, Richard D; Burkle, Frederick M.; Cairns, Bruce A.; Carr, Brendan G.; Courtney, Brooke; DeDecker, Lisa D.; De Jong, Marla J.; Dominguez-Cherit, Guillermo; Dries, David; Einav, Sharon; Erstad, Brian L.; Etienne, Mill; Fagbuyi, Daniel B.; Fang, Ray; Feldman, Henry; Garzon, Hernando; Geiling, James; Gomersall, Charles D.; Grissom, Colin K.; Hanfling, Dan; Hick, John L.; Hodge, James G.; Hupert, Nathaniel; Ingbar, David; Kanter, Robert K.; King, Mary A.; Kuhnley, Robert N.; Lawler, James; Leung, Sharon; Levy, Deborah A.; Lim, Matthew L.; Livinski, Alicia; Luyckx, Valerie; Marcozzi, David; Medina, Justine; Miramontes, David A.; Mutter, Ryan; Niven, Alexander S.; Penn, Matthew S.; Pepe, Paul E.; Powell, Tia; Prezant, David; Reed, Mary Jane; Rich, Preston; Rodriquez, Dario; Roxland, Beth E.; Sarani, Babak; Shah, Umair A.; Skippen, Peter; Sprung, Charles L.; Subbarao, Italo; Talmor, Daniel; Toner, Eric S.; Tosh, Pritish K.; Upperman, Jeffrey S.; Uyeki, Timothy M.; Weireter, Leonard J.; West, T. Eoin; Wilgis, John; Ornelas, Joe; McBride, Deborah; Reid, David; Baez, Amado; Baldisseri, Marie; Blumenstock, James S.; Cooper, Art; Ellender, Tim; Helminiak, Clare; Jimenez, Edgar; Krug, Steve; Lamana, Joe; Masur, Henry; Mathivha, L. Rudo; Osterholm, Michael T.; Reynolds, H. Neal; Sandrock, Christian; Sprecher, Armand; Tillyard, Andrew; White, Douglas; Wise, Robert; Yeskey, Kevin

2014-01-01

BACKGROUND: During disasters, supply chain vulnerabilities, such as power, transportation, and communication, may affect the delivery of medications and medical supplies and hamper the ability to deliver critical care services. Disasters also have the potential to disrupt information technology (IT) in health-care systems, resulting in interruptions in patient care, particularly critical care, and other health-care business functions. The suggestions in this article are important for all of those involved in a large-scale pandemic or disaster with multiple critically ill or injured patients, including front-line clinicians, hospital administrators, and public health or government officials. METHODS: The Business and Continuity of Operations Panel followed the American College of Chest Physicians (CHEST) Guidelines Oversight Committee’s methodology in developing key questions regarding medication and supply shortages and the impact disasters may have on healthcare IT. Task force members met in person to develop the 13 key questions believed to be most relevant for Business and Continuity of Operations. A systematic literature review was then performed for relevant articles and documents, reports, and gray literature reported since 2007. No studies of sufficient quality were identified upon which to make evidence-based recommendations. Therefore, the panel developed expert opinion-based suggestions using a modified Delphi process. RESULTS: Eighteen suggestions addressing mitigation strategies for supply chain vulnerabilities including medications and IT were generated. Suggestions offered to hospitals and health system leadership regarding medication and supply shortages include: (1) purchase key medications and supplies from more than one supplier, (2) substituted medications or supplies should ideally be similar to those already used by an institution’s providers, (3) inventories should be tracked electronically to monitor medication/supply levels, (4) consider higher inventories of medications and supplies known or projected to be in short supply, (5) institute alternate use protocols when a (potential) shortage is identified, and 6) support government and nongovernmental organizations in efforts to address supply chain vulnerability. Health-care IT can be damaged in a disaster, and hospitals and health system leadership should have plans for urgently reestablishing local area networks. Planning should include using portable technology, plans for providing power, maintenance of a patient database that can accompany each patient, and protection of patient privacy. Additionally, long-term planning should include prioritizing servers and memory disk drives and possibly increasing inventory of critical IT supplies in preparedness planning. CONCLUSIONS: The provision of care to the critically ill or injured during a pandemic or disaster is dependent on key processes, such as the supply chain, and infrastructure, such as IT systems. Hospitals and health systems will help minimize the impact of medication and supply shortages with a focused strategy using the steps suggested. IT preparedness for maintaining local area networks, functioning clinical information systems, and adequate server and memory storage capacity will greatly enhance preparedness for hospital and health system clinical and business operations. PMID:25144857

[Study on anti-bacterium activity of ginkgolic acids and their momomers].

PubMed

Yang, Xiaoming; Zhu, Wei; Chen, Jun; Qian, Zhiyu; Xie, Jimin

2004-09-01

Ginkgolic acids and their three monomers were separated from ginkgo sarcotestas. The anti-bacterium activity of ginkgolic acids were tested. The relation between the anti-bacterium activity and side chain of ginkgolic acid were studied. The MIC of ginkgolic acids and their three monomers and salicylic acid were tested. Ginkgolic acid has strong inhibitive effect on G+-bacterium. Salicylic acid has no side chain, so no anti-bacterial activity. When the length of gingkolic acid side chain is C13:0, it has the strongest anti-bacterial activity in three monomers. The side chain of ginkgolic acid is the key functional group that possessed anti-bacterial activity. The length of Ginkgolic acid was the main effective factor of anti-bacterial activity.

Proteins aggregation and human diseases

NASA Astrophysics Data System (ADS)

Hu, Chin-Kun

2015-04-01

Many human diseases and the death of most supercentenarians are related to protein aggregation. Neurodegenerative diseases include Alzheimer's disease (AD), Huntington's disease (HD), Parkinson's disease (PD), frontotemporallobar degeneration, etc. Such diseases are due to progressive loss of structure or function of neurons caused by protein aggregation. For example, AD is considered to be related to aggregation of Aβ40 (peptide with 40 amino acids) and Aβ42 (peptide with 42 amino acids) and HD is considered to be related to aggregation of polyQ (polyglutamine) peptides. In this paper, we briefly review our recent discovery of key factors for protein aggregation. We used a lattice model to study the aggregation rates of proteins and found that the probability for a protein sequence to appear in the conformation of the aggregated state can be used to determine the temperature at which proteins can aggregate most quickly. We used molecular dynamics and simple models of polymer chains to study relaxation and aggregation of proteins under various conditions and found that when the bending-angle dependent and torsion-angle dependent interactions are zero or very small, then protein chains tend to aggregate at lower temperatures. All atom models were used to identify a key peptide chain for the aggregation of insulin chains and to find that two polyQ chains prefer anti-parallel conformation. It is pointed out that in many cases, protein aggregation does not result from protein mis-folding. A potential drug from Chinese medicine was found for Alzheimer's disease.

Impact of Branched-Chain Amino Acid Catabolism on Fatty Acid and Alkene Biosynthesis in Micrococcus luteus.

PubMed

Surger, Maximilian J; Angelov, Angel; Stier, Philipp; Übelacker, Maria; Liebl, Wolfgang

2018-01-01

Micrococcus luteus naturally produces alkenes, unsaturated aliphatic hydrocarbons, and represents a promising host to produce hydrocarbons as constituents of biofuels and lubricants. In this work, we identify the genes for key enzymes of the branched-chain amino acid catabolism in M. luteus , whose first metabolic steps lead also to the formation of primer molecules for branched-chain fatty acid and olefin biosynthesis, and demonstrate how these genes can be used to manipulate the production of specific olefins in this organism. We constructed mutants of several gene candidates involved in the branched-chain amino acid metabolism or its regulation and investigated the resulting changes in the cellular fatty acid and olefin profiles by GC/MS. The gene cluster encoding the components of the branched-chain α-keto acid dehydrogenase (BCKD) complex was identified by deletion and promoter exchange mutagenesis. Overexpression of the BCKD gene cluster resulted in about threefold increased olefin production whereas deletion of the cluster led to a drastic reduction in branched-chain fatty acid content and a complete loss of olefin production. The specificities of the acyl-CoA dehydrogenases of the branched amino acid degradation pathways were deduced from the fatty acid and olefin profiles of the respective deletion mutant strains. In addition, growth experiments with branched amino acids as the only nitrogen source were carried out with the mutants in order to confirm our annotations. Both the deletion mutant of the BCKD complex, responsible for the further degradation of all three branched-chain amino acids, as well as the deletion mutant of the proposed isovaleryl-CoA dehydrogenase (specific for leucine degradation) were not able to grow on leucine in contrast to the parental strain. In conclusion, our experiments allow the unambigous assignment of specific functions to the genes for key enzymes of the branched-chain amino acid metabolism of M. luteus . We also show how this knowledge can be used to engineer the isomeric composition and the chain lengths of the olefins produced by this organism.

Asymmetric synthesis of the HMG-CoA reductase inhibitor atorvastatin calcium: an organocatalytic anhydride desymmetrization and cyanide-free side chain elongation approach.

PubMed

Chen, Xiaofei; Xiong, Fangjun; Chen, Wenxue; He, Qiuqin; Chen, Fener

2014-03-21

An efficient asymmetric synthesis of atorvastatin calcium has been achieved from commercially available diethyl 3-hydroxyglutarate through a novel approach that involves an organocatalytic enantioselective cyclic anhydride desymmetrization to establish C(3) stereogenicity and cyanide-free assembly of C7 amino type side chain via C5+C2 strategy as the key transformations.

Local markets for global health technologies: lessons learned from advancing 6 new products.

PubMed

Matthias, Dipika Mathur; Taylor, Catharine H; Sen, Debjeet; Metzler, Mutsumi

2014-05-01

Key components to support local institutional and consumer markets are: supply chain, finance, clinical use, and consumer use. Key lessons learned: (1) Build supply and demand simultaneously. (2) Support a lead organization to drive the introduction process. (3) Plan for scale up from the start. (4) Profitability for the private sector is an absolute.

Multilocus lod scores in large pedigrees: combination of exact and approximate calculations.

PubMed

Tong, Liping; Thompson, Elizabeth

2008-01-01

To detect the positions of disease loci, lod scores are calculated at multiple chromosomal positions given trait and marker data on members of pedigrees. Exact lod score calculations are often impossible when the size of the pedigree and the number of markers are both large. In this case, a Markov Chain Monte Carlo (MCMC) approach provides an approximation. However, to provide accurate results, mixing performance is always a key issue in these MCMC methods. In this paper, we propose two methods to improve MCMC sampling and hence obtain more accurate lod score estimates in shorter computation time. The first improvement generalizes the block-Gibbs meiosis (M) sampler to multiple meiosis (MM) sampler in which multiple meioses are updated jointly, across all loci. The second one divides the computations on a large pedigree into several parts by conditioning on the haplotypes of some 'key' individuals. We perform exact calculations for the descendant parts where more data are often available, and combine this information with sampling of the hidden variables in the ancestral parts. Our approaches are expected to be most useful for data on a large pedigree with a lot of missing data. (c) 2007 S. Karger AG, Basel

Using SCOR as a Supply Chain Management Framework for Government Agency Contract Requirements

NASA Technical Reports Server (NTRS)

Paxton, Joe

2010-01-01

Enterprise Supply Chain Management consists of: Specifying suppliers to support inter-program and inter-agency efforts. Optimizing inventory levels and locations throughout the supply chain. Executing corrective actions to improve quality and lead time issues throughout the supply chain. Processing reported data to calculate and make visible supply chain performance (provide information for decisions and actions). Ensuring the right hardware and information is provided at the right time and in the right place. Monitoring the industrial base while developing, producing, operating and retiring a system. Seeing performance deep in the supply chain that could indicate issues affecting system availability and readiness.

Single-Cell Whole-Genome Amplification and Sequencing: Methodology and Applications.

PubMed

Huang, Lei; Ma, Fei; Chapman, Alec; Lu, Sijia; Xie, Xiaoliang Sunney

2015-01-01

We present a survey of single-cell whole-genome amplification (WGA) methods, including degenerate oligonucleotide-primed polymerase chain reaction (DOP-PCR), multiple displacement amplification (MDA), and multiple annealing and looping-based amplification cycles (MALBAC). The key parameters to characterize the performance of these methods are defined, including genome coverage, uniformity, reproducibility, unmappable rates, chimera rates, allele dropout rates, false positive rates for calling single-nucleotide variations, and ability to call copy-number variations. Using these parameters, we compare five commercial WGA kits by performing deep sequencing of multiple single cells. We also discuss several major applications of single-cell genomics, including studies of whole-genome de novo mutation rates, the early evolution of cancer genomes, circulating tumor cells (CTCs), meiotic recombination of germ cells, preimplantation genetic diagnosis (PGD), and preimplantation genomic screening (PGS) for in vitro-fertilized embryos.

The biomechanical and perceptual influence of chain resistance on the performance of the olympic clean.

PubMed

Berning, Joseph M; Coker, Cheryl A; Briggs, Doug

2008-03-01

Proponents of chain training suggest that using chains hung from the ends of barbells rather than using conventional barbells alone enhances strength, power, and neuromuscular adaptations. The purpose of this study was to determine whether a conventional barbell with chains compared to a conventional barbell without chains would affect the performance of an Olympic Clean. The subjects were also asked regarding their perception of how chains affected their lifting. Four male and 3 female competitive weightlifters who used chains as part of their training participated in the study. The testing protocol compared the subjects' lifting 80% and 85% of their 1 repetition maximum (1RM) using conventional barbells and their lifting 80% and 85% of their 1RM using chains (75% conventional barbells + 5% chains and 80% conventional barbells + 5% chains, respectively). Video analysis evaluated the bar's vertical displacement and velocity and the rate of force production. Vertical ground reaction forces for the first-pull, unweighting, and second-pull phases of the lift were evaluated by using a force plate. After testing, the subjects completed a 2-item questionnaire asking individual perception of the effects of the chains. The results showed no significant difference for condition for any of the variables examined. In contrast, all subjects perceived that the chains required a greater effort. In conclusion, the results indicated that the addition of chains provided no greater value over lifting conventional barbells alone in the performance of the Olympic Clean, although the subjects perceived the chains to have a positive effect.

Florida Everglades and Keys, USA

NASA Technical Reports Server (NTRS)

1991-01-01

Though much of southern Florida is covered by clouds, the Florida Everglades and Keys (25.0N, 82.0W) remain relatively clear in this nearly vertical view. The view covers the Gulf of Mexico port city of Ft. Myers, and Lake Okeechobee, at the top of the scene, in the north, The Everglades, in the center and the entire Florida Key Chain at the bottom. Even with the many popcorn clouds, ground detail and the city of Miami is easily discerned.

Development of real-time PCR method for the detection and the quantification of a new endogenous reference gene in sugar beet "Beta vulgaris L.": GMO application.

PubMed

Chaouachi, Maher; Alaya, Akram; Ali, Imen Ben Haj; Hafsa, Ahmed Ben; Nabi, Nesrine; Bérard, Aurélie; Romaniuk, Marcel; Skhiri, Fethia; Saïd, Khaled

2013-01-01

KEY MESSAGE : Here, we describe a new developed quantitative real-time PCR method for the detection and quantification of a new specific endogenous reference gene used in GMO analysis. The key requirement of this study was the identification of a new reference gene used for the differentiation of the four genomic sections of the sugar beet (Beta vulgaris L.) (Beta, Corrollinae, Nanae and Procumbentes) suitable for quantification of genetically modified sugar beet. A specific qualitative polymerase chain reaction (PCR) assay was designed to detect the sugar beet amplifying a region of the adenylate transporter (ant) gene only from the species of the genomic section I of the genus Beta (cultivated and wild relatives) and showing negative PCR results for 7 species of the 3 other sections, 8 related species and 20 non-sugar beet plants. The sensitivity of the assay was 15 haploid genome copies (HGC). A quantitative real-time polymerase chain reaction (QRT-PCR) assay was also performed, having high linearity (R (2) > 0.994) over sugar beet standard concentrations ranging from 20,000 to 10 HGC of the sugar beet DNA per PCR. The QRT-PCR assay described in this study was specific and more sensitive for sugar beet quantification compared to the validated test previously reported in the European Reference Laboratory. This assay is suitable for GMO quantification in routine analysis from a wide variety of matrices.

Involvement of polyubiquitin chains via specific chain linkages in stress response in mammalian cells.

PubMed

Fujimuro, Masahiro; Nishiya, Tadashi; Nomura, Yasuyuki; Yokosawa, Hideyoshi

2005-12-01

Polyubiquitination plays key roles in various proteasome-dependent and independent cellular events. To elucidate roles in stress response of polyubiquitin chains formed via specific chain linkages in mammalian cells, we established NIH3T3 stable cell lines that are capable of conditionally expressing K29R, K48R and K63R ubiquitin mutants, in which the Lys29, Lys48 and Lys63 residues of ubiquitin had been changed to Arg, and we examined the effects of various stresses on their cell viabilities. The expression of K63R ubiquitin mutant decreased viability of the cells post-exposed to ethanol, H(2)O(2) and methyl methanesulfonate (MMS), while that of K48R mutant decreased viability of the cells post-exposed to heat shock as well as ethanol, H(2)O(2) and MMS. Thus, these results suggest that polyubiquitin chains formed via specific chain linkages are involved in the respective stress responses in mammalian cells.

A new implementation of full resolution SBAS-DInSAR processing chain for the effective monitoring of structures and infrastructures

NASA Astrophysics Data System (ADS)

Bonano, Manuela; Buonanno, Sabatino; Ojha, Chandrakanta; Berardino, Paolo; Lanari, Riccardo; Zeni, Giovanni; Manunta, Michele

2017-04-01

The advanced DInSAR technique referred to as Small BAseline Subset (SBAS) algorithm has already largely demonstrated its effectiveness to carry out multi-scale and multi-platform surface deformation analyses relevant to both natural and man-made hazards. Thanks to its capability to generate displacement maps and long-term deformation time series at both regional (low resolution analysis) and local (full resolution analysis) spatial scales, it allows to get more insights on the spatial and temporal patterns of localized displacements relevant to single buildings and infrastructures over extended urban areas, with a key role in supporting risk mitigation and preservation activities. The extensive application of the multi-scale SBAS-DInSAR approach in many scientific contexts has gone hand in hand with new SAR satellite mission development, characterized by different frequency bands, spatial resolution, revisit times and ground coverage. This brought to the generation of huge DInSAR data stacks to be efficiently handled, processed and archived, with a strong impact on both the data storage and the computational requirements needed for generating the full resolution SBAS-DInSAR results. Accordingly, innovative and effective solutions for the automatic processing of massive SAR data archives and for the operational management of the derived SBAS-DInSAR products need to be designed and implemented, by exploiting the high efficiency (in terms of portability, scalability and computing performances) of the new ICT methodologies. In this work, we present a novel parallel implementation of the full resolution SBAS-DInSAR processing chain, aimed at investigating localized displacements affecting single buildings and infrastructures relevant to very large urban areas, relying on different granularity level parallelization strategies. The image granularity level is applied in most steps of the SBAS-DInSAR processing chain and exploits the multiprocessor systems with distributed memory. Moreover, in some processing steps very heavy from the computational point of view, the Graphical Processing Units (GPU) are exploited for the processing of blocks working on a pixel-by-pixel basis, requiring strong modifications on some key parts of the sequential full resolution SBAS-DInSAR processing chain. GPU processing is implemented by efficiently exploiting parallel processing architectures (as CUDA) for increasing the computing performances, in terms of optimization of the available GPU memory, as well as reduction of the Input/Output operations on the GPU and of the whole processing time for specific blocks w.r.t. the corresponding sequential implementation, particularly critical in presence of huge DInSAR datasets. Moreover, to efficiently handle the massive amount of DInSAR measurements provided by the new generation SAR constellations (CSK and Sentinel-1), we perform a proper re-design strategy aimed at the robust assimilation of the full resolution SBAS-DInSAR results into the web-based Geonode platform of the Spatial Data Infrastructure, thus allowing the efficient management, analysis and integration of the interferometric results with different data sources.

Disconnection: the user voice within the wound dressing supply chain.

PubMed

Campling, Natasha; Grocott, Patricia; Cowley, Sarah

2008-03-01

This study examined the user voice in England's National Health Service (NHS) wound dressing supply chain. The impetus for this work came from involvement in a collaboration between industry and clinicians, entitled Woundcare Research for Appropriate Products. Experiences from that study highlighted the notable absence of research about the impact of the supply chain on the users of dressings. Interview data are presented following an outline of the grounded theory method used. These data were obtained from key stakeholders (n = 41) within the wound dressing supply chain such as nurses, manufacturers, distributors, professional organizations, government organizations and user groups. The consequences of supply disconnection revealed haphazard supply, unmet user needs and lack of information transfer between player groups. These consequences explain the lack of user voice in the supply chain and have far-reaching implications for nursing management, through purchasing decisions and nurses' management of wound care.

Light Chain Cast Nephropathy: Practical Considerations in the Management of Myeloma Kidney-What We Know and What the Future May Hold.

PubMed

Manohar, Sandhya; Nasr, Samih H; Leung, Nelson

2018-05-03

To update and evaluate the current knowledge on pathogenesis and management of light chain cast nephropathy. Light chain cast nephropathy (LCCN) is the leading cause of acute renal failure in patients with multiple myeloma and is currently recognized as a myeloma defining event. The immunoglobulin free light chain plays an integral role in the pathogenesis of LCCN. The level of free light chain (FLC) in the blood and urine is directly associated with the risk of developing LCCN. Recovery of renal function is related to the speed and degree of the serum FLC reduction. Recently, two randomized trials using high cutoff dialyzer for the removal of serum FLC produced different results in terms of renal recovery. FLC plays a key role in the development and resolution of LCCN. Future therapies will aim to rapidly reduce its concentration or interrupt its interaction with Tamm-Horsfall protein.

Florida Keys

NASA Image and Video Library

2002-12-13

The Florida Keys are a chain of islands, islets and reefs extending from Virginia Key to the Dry Tortugas for about 309 kilometers (192 miles). The keys are chiefly limestone and coral formations. The larger islands of the group are Key West (with its airport), Key Largo, Sugarloaf Key, and Boca Chica Key. A causeway extends from the mainland to Key West. This image was acquired on October 28, 2001, by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on NASA's Terra satellite. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), ASTER images Earth to map and monitor the changing surface of our planet. http://photojournal.jpl.nasa.gov/catalog/PIA03890

Assembly and Function of Heterotypic Ubiquitin Chains in Cell-Cycle and Protein Quality Control.

PubMed

Yau, Richard G; Doerner, Kerstin; Castellanos, Erick R; Haakonsen, Diane L; Werner, Achim; Wang, Nan; Yang, X William; Martinez-Martin, Nadia; Matsumoto, Marissa L; Dixit, Vishva M; Rape, Michael

2017-11-02

Posttranslational modification with ubiquitin chains controls cell fate in all eukaryotes. Depending on the connectivity between subunits, different ubiquitin chain types trigger distinct outputs, as seen with K48- and K63-linked conjugates that drive protein degradation or complex assembly, respectively. Recent biochemical analyses also suggested roles for mixed or branched ubiquitin chains, yet without a method to monitor endogenous conjugates, the physiological significance of heterotypic polymers remained poorly understood. Here, we engineered a bispecific antibody to detect K11/K48-linked chains and identified mitotic regulators, misfolded nascent polypeptides, and pathological Huntingtin variants as their endogenous substrates. We show that K11/K48-linked chains are synthesized and processed by essential ubiquitin ligases and effectors that are mutated across neurodegenerative diseases; accordingly, these conjugates promote rapid proteasomal clearance of aggregation-prone proteins. By revealing key roles of K11/K48-linked chains in cell-cycle and quality control, we establish heterotypic ubiquitin conjugates as important carriers of biological information. Copyright © 2017 Elsevier Inc. All rights reserved.

Integration of environmental aspects in modelling and optimisation of water supply chains.

PubMed

Koleva, Mariya N; Calderón, Andrés J; Zhang, Di; Styan, Craig A; Papageorgiou, Lazaros G

2018-04-26

Climate change becomes increasingly more relevant in the context of water systems planning. Tools are necessary to provide the most economic investment option considering the reliability of the infrastructure from technical and environmental perspectives. Accordingly, in this work, an optimisation approach, formulated as a spatially-explicit multi-period Mixed Integer Linear Programming (MILP) model, is proposed for the design of water supply chains at regional and national scales. The optimisation framework encompasses decisions such as installation of new purification plants, capacity expansion, and raw water trading schemes. The objective is to minimise the total cost incurring from capital and operating expenditures. Assessment of available resources for withdrawal is performed based on hydrological balances, governmental rules and sustainable limits. In the light of the increasing importance of reliability of water supply, a second objective, seeking to maximise the reliability of the supply chains, is introduced. The epsilon-constraint method is used as a solution procedure for the multi-objective formulation. Nash bargaining approach is applied to investigate the fair trade-offs between the two objectives and find the Pareto optimality. The models' capability is addressed through a case study based on Australia. The impact of variability in key input parameters is tackled through the implementation of a rigorous global sensitivity analysis (GSA). The findings suggest that variations in water demand can be more disruptive for the water supply chain than scenarios in which rainfalls are reduced. The frameworks can facilitate governmental multi-aspect decision making processes for the adequate and strategic investments of regional water supply infrastructure. Copyright © 2018. Published by Elsevier B.V.

Assessment of molecular contamination in mask pod

NASA Astrophysics Data System (ADS)

Foray, Jean Marie; Dejaune, Patrice; Sergent, Pierre; Gough, Stuart; Cheung, D.; Davenet, Magali; Favre, Arnaud; Rude, C.; Trautmann, T.; Tissier, Michel; Fontaine, H.; Veillerot, M.; Avary, K.; Hollein, I.; Lerit, R.

2008-04-01

Context/ study Motivation: Contamination and especially Airbone Molecular Contamination (AMC) is a critical issue for mask material flow with a severe and fairly unpredictable risk of induced contamination and damages especially for 193 nm lithography. It is therefore essential to measure, to understand and then try to reduce AMC in mask environment. Mask material flow was studied in a global approach by a pool of European partners, especially within the frame of European MEDEA+ project, so called "MUSCLE". This paper deals with results and assessment of mask pod environment in term of molecular contamination in a first step, then in a second step preliminary studies to reduce mask pod influence and contamination due to material out gassing. Approach and techniques: A specific assessment of environmental / molecular contamination along the supply chain was performed by all partners. After previous work presented at EMLC 07, further studies were performed on real time contamination measurement pod at different sites locations (including Mask manufacturing site, blank manufacturing sites, IC fab). Studies were linked to the main critical issues: cleaning, storage, handling, materials and processes. Contamination measurement campaigns were carried out along the mask supply chain using specific Adixen analyzer in order to monitor in real time organic contaminants (ppb level) in mask pods. Key results would be presented: VOC, AMC and humidity level on different kinds of mask carriers, impact of basic cleaning on pod outgassing measurement (VOC, NH3), and process influence on pod contamination... In a second step, preliminary specific pod conditioning studies for better pod environment were performed based on Adixen vacuum process. Process influence had been experimentally measured in term of molecular outgassing from mask pods. Different AMC experimental characterization methods had been carried out leading to results on a wide range of organic and inorganic contaminants: by inline techniques based on Adixen humidity, also VOC and organic sensors, together by off-line techniques already used in the extensive previous mask pods benchmark (TD-GCMS & Ionic Chromatography). Humidity and VOC levels from mask carriers had shown significant reduction after Adixen pod conditioning process. Focus had been made on optimized vacuum step (for AMC) after particles carrier cleaning cycle. Based upon these key results new procedures, as well as guidelines for mask carrier cleaning optimization are proposed to improve pod contamination control. Summary results/next steps: This paper reports molecular contamination measurement campaigns performed by a pool of European partners along the mask supply chain. It allows us to investigate, identify and quantify critical molecular contamination in mask pod, as well as VOC and humidity, issues depending on locations, uses, and carrier's type. Preliminary studies highlight initial process solutions for pods conditioning that are being used for short term industrialization and further industrialized.

Challenges of standardized continuous quality improvement programs in community pharmacies: the case of SafetyNET-Rx.

PubMed

Boyle, Todd A; MacKinnon, Neil J; Mahaffey, Thomas; Duggan, Kellie; Dow, Natalie

2012-01-01

Research on continuous quality improvement (CQI) in community pharmacies lags in comparison to service, manufacturing, and various health care sectors. As a result, very little is known about the challenges community pharmacies face when implementing CQI programs in general, let alone the challenges of implementing a standardized and technologically sophisticated one. This research identifies the initial challenges of implementing a standardized CQI program in community pharmacies and how such challenges were addressed by pharmacy staff. Through qualitative interviews, a multisite study of the SafetyNET-Rx CQI program involving community pharmacies in Nova Scotia, Canada, was performed to identify such challenges. Interviews were conducted with the CQI facilitator (ie, staff pharmacist or technician) in 55 community pharmacies that adopted the SafetyNET-Rx program. Of these 55 pharmacies, 25 were part of large national corporate chains, 22 were part of banner chains, and 8 were independent pharmacies. A total of 10 different corporate chains and banners were represented among the 55 pharmacies. Thematic content analysis using well-established coding procedures was used to explore the interview data and elicit the key challenges faced. Six major challenges were identified, specifically finding time to report, having all pharmacy staff involved in quality-related event (QRE) reporting, reporting apprehensiveness, changing staff relationships, meeting to discuss QREs, and accepting the online technology. Challenges were addressed in a number of ways including developing a manual-online hybrid reporting system, managers paying staff to meet after hours, and pharmacy managers showing visible commitment to QRE reporting and learning. This research identifies key challenges to implementing CQI programs in community pharmacies and also provides a starting point for future research relating to how the challenges of QRE reporting and learning in community pharmacies change over time. Copyright © 2012 Elsevier Inc. All rights reserved.

Second-order schedules: discrimination of components1

PubMed Central

Squires, Nancy; Norborg, James; Fantino, Edmund

1975-01-01

Pigeons were exposed to a series of second-order schedules in which the completion of a fixed number of fixed-interval components produced food. In Experiment 1, brief (2 sec) stimulus presentations occurred as each fixed-interval component was completed. During the brief-stimulus presentation terminating the last fixed-interval component, a response was required on a second key, the brief-stimulus key, to produce food. Responses on the brief-stimulus key before the last brief-stimulus presentation had no scheduled consequences, but served as a measure of the extent to which the final component was discriminated from preceding components. Whether there were one, two, four, or eight fixed-interval components, responses on the brief-stimulus key occurred during virtually every brief-stimulus presentation. In Experiment 2, an attempt was made to punish unnecessary responses on the brief-stimulus key, i.e., responses on the brief-stimulus key that occurred before the last component. None of the pigeons learned to withhold these responses, even though they produced a 15-sec timeout and loss of primary reinforcement. In Experiment 3, different key colors were associated with each component of a second-order schedule (a chain schedule). In contrast to Experiment 1, brief-stimulus key responses were confined to the last component. It was concluded that pigeons do not discriminate well between components of second-order schedules unless a unique exteroceptive cue is provided for each component. The relative discriminability of the components may account for the observed differences in initial-component response rates between comparable brief-stimulus, tandem, and chain schedules. PMID:16811868

Factors influencing the choice of performance measures for the oil and gas supply chain – exploratory study

NASA Astrophysics Data System (ADS)

Menhat, Masha; Yusuf, Y.

2018-04-01

The current value of the oil price per barrel has severely impacted the oil and gas industry around the world. This has worsened the situation due to the fact that it has long been the backbone of the country through the energy supply, employability and also its role as the major economic contributor. Due to multiple external factors that affect this industry such as crude oil availability, oil price fluctuation, high transportation cost, as well as exposure to high uncertainties, it is sensible for the supply chain practitioner to shift their focus in managing their resources and capabilities. To maximise the potential of supply chain activities in improving overall company performance, it is important to pay extra attention on their performance management. This includes the design of meaningful performance measurement framework to assess organisational performance. This study will explore the influencing factors in choosing performance measures for the oil and gas supply chain. Five in-depth interviews were conducted with supply chain experts within the industry. Eight influencing factors have been identified through the interviews.

Alternative oxidase: a respiratory electron transport chain pathway essential for maintaining photosynthetic performance during drought stress.

PubMed

Vanlerberghe, Greg C; Martyn, Greg D; Dahal, Keshav

2016-07-01

Photosynthesis and respiration are the hubs of energy metabolism in plants. Drought strongly perturbs photosynthesis as a result of both diffusive limitations resulting from stomatal closure, and in some cases biochemical limitations that are associated with a reduced abundance of key photosynthetic components. The effects of drought on respiration, particularly respiration in the light (RL ), are less understood. The plant mitochondrial electron transport chain includes a non-energy conserving terminal oxidase called alternative oxidase (AOX). Several studies have shown that drought increases AOX transcript, protein and maximum capacity. Here we review recent studies comparing wild-type (WT) tobacco to transgenic lines with altered AOX protein amount. Specifically during drought, RL was compromised in AOX knockdown plants and enhanced in AOX overexpression plants, compared with WT. Significantly, these differences in RL were accompanied by dramatic differences in photosynthetic performance. Knockdown of AOX increased the susceptibility of photosynthesis to drought-induced biochemical limitations, while overexpression of AOX delayed the development of such biochemical limitations, compared with WT. Overall, the results indicate that AOX is essential to maintaining RL during drought, and that this non-energy conserving respiration maintains photosynthesis during drought by promoting energy balance in the chloroplast. This review also outlines several areas for future research, including the possibility that enhancement of non-energy conserving respiratory electron sinks may be a useful biotechnological approach to increase plant performance during stress. © 2016 Scandinavian Plant Physiology Society.

Manufacturing and Security Challenges in 3D Printing

NASA Astrophysics Data System (ADS)

Zeltmann, Steven Eric; Gupta, Nikhil; Tsoutsos, Nektarios Georgios; Maniatakos, Michail; Rajendran, Jeyavijayan; Karri, Ramesh

2016-07-01

As the manufacturing time, quality, and cost associated with additive manufacturing (AM) continue to improve, more and more businesses and consumers are adopting this technology. Some of the key benefits of AM include customizing products, localizing production and reducing logistics. Due to these and numerous other benefits, AM is enabling a globally distributed manufacturing process and supply chain spanning multiple parties, and hence raises concerns about the reliability of the manufactured product. In this work, we first present a brief overview of the potential risks that exist in the cyber-physical environment of additive manufacturing. We then evaluate the risks posed by two different classes of modifications to the AM process which are representative of the challenges that are unique to AM. The risks posed are examined through mechanical testing of objects with altered printing orientation and fine internal defects. Finite element analysis and ultrasonic inspection are also used to demonstrate the potential for decreased performance and for evading detection. The results highlight several scenarios, intentional or unintentional, that can affect the product quality and pose security challenges for the additive manufacturing supply chain.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Napier, Bruce A.; Fellows, Robert J.; Krupka, Kenneth M.

This report describes work performed for the U.S. Nuclear Regulatory Commission’s project Assessment of Food Chain Pathway Parameters in Biosphere Models, which was established to assess and evaluate a number of key parameters used in the food-chain models used in performance assessments of radioactive waste disposal facilities. Section 2 of this report summarizes characteristics of samples of soils and groundwater from three geographical regions of the United States, the Southeast, Northwest, and Southwest, and analyses performed to characterize their physical and chemical properties. Because the uptake and behavior of radionuclides in plant roots, plant leaves, and animal products depends onmore » the chemistry of the water and soil coming in contact with plants and animals, water and soil samples collected from these regions of the United States were used in experiments at Pacific Northwest National Laboratory to determine radionuclide soil-to-plant concentration ratios. Crops and forage used in the experiments were grown in the soils, and long-lived radionuclides introduced into the groundwater provide the contaminated water used to water the grown plants. The radionuclides evaluated include 99Tc, 238Pu, and 241Am. Plant varieties include alfalfa, corn, onion, and potato. The radionuclide uptake results from this research study show how regional variations in water quality and soil chemistry affect radionuclide uptake. Section 3 summarizes the procedures and results of the uptake experiments, and relates the soil-to-plant uptake factors derived. In Section 4, the results found in this study are compared with similar values found in the biosphere modeling literature; the study’s results are generally in line with current literature, but soil- and plant-specific differences are noticeable. This food-chain pathway data may be used by the NRC staff to assess dose to persons in the reference biosphere (e.g., persons who live and work in an area potentially affected by radionuclide releases) of waste disposal facilities and decommissioning sites.« less

ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, Klaas Jan; Homan, Greg; Brown, Rich

2009-04-15

The term ?household carbon footprint? refers to the total annual carbon emissions associated with household consumption of energy, goods, and services. In this project, Lawrence Berkeley National Laboratory developed a carbon footprint modeling framework that characterizes the key underlying technologies and processes that contribute to household carbon footprints in California and the United States. The approach breaks down the carbon footprint by 35 different household fuel end uses and 32 different supply chain fuel end uses. This level of end use detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the carbon footprintmore » of California households. The modeling framework was applied to estimate the annual home energy and supply chain carbon footprints of a prototypical California household. A preliminary assessment of parameter uncertainty associated with key model input data was also conducted. To illustrate the policy-relevance of this modeling framework, a case study was conducted that analyzed the achievable carbon footprint reductions associated with the adoption of energy efficient household and supply chain technologies.« less

Taking stock: protocol for evaluating a family planning supply chain intervention in Senegal.

PubMed

Cavallaro, Francesca L; Duclos, Diane; Baggaley, Rebecca F; Penn-Kekana, Loveday; Goodman, Catherine; Vahanian, Alice; Santos, Andreia C; Bradley, John; Paintain, Lucy; Gallien, Jérémie; Gasparrini, Antonio; Hasselback, Leah; Lynch, Caroline A

2016-04-21

In Senegal, only 12% of women of reproductive age in union (WRAU) were using contraceptives and another 29% had an unmet need for contraceptives in 2010-11. One potential barrier to accessing contraceptives is the lack of stock availability in health facilities where women seek them. Multiple supply chain interventions have been piloted in low- and middle-income countries with the aim of improving contraceptive availability in health facilities. However, there is limited evidence on the effect of these interventions on contraceptive availability in facilities, and in turn on family planning use in the population. This evaluation protocol pertains to a supply chain intervention using performance-based contracting for contraceptive distribution that was introduced throughout Senegal between 2012 and 2015. This multi-disciplinary research project will include quantitative, qualitative and economic evaluations. Trained researchers in the different disciplines will implement the studies separately but alongside each other, sharing findings throughout the project to inform each other's data collection. A non-randomised study with stepped-wedge design will be used to estimate the effect of the intervention on contraceptive stock availability in health facilities, and on the modern contraceptive prevalence rate among women in Senegal, compared to the current pull-based distribution model used for other commodities. Secondary data from annual Service Provision Assessments and Demographic and Health Surveys will be used for this study. Data on stock availability and monthly family planning consultations over a 4-year period will be collected from 200 health facilities in five regions to perform time series analyses. A process evaluation will be conducted to understand the extent to which the intervention was implemented as originally designed, the acceptability of third-party logisticians within the health system and potential unintended consequences. These will be assessed using monthly indicator data from the implementer and multiple ethnographic methods, including in-depth interviews with key informants and stakeholders at all levels of the distribution system, observations of third-party logisticians and clinic diaries. An economic evaluation will estimate the cost of the intervention, as well as its cost-effectiveness compared to the current supply chain model. Given the very limited evidence base, there is an important need for a comprehensive standardised approach to evaluating supply chain management, and distribution specifically. This evaluation will help address this evidence gap by providing rigorous evidence on whether private performance-based contracting for distribution of contraceptives can contribute to improving access to family planning in low- and middle-income countries.

A systems engineering approach to automated failure cause diagnosis in space power systems

NASA Technical Reports Server (NTRS)

Dolce, James L.; Faymon, Karl A.

1987-01-01

Automatic failure-cause diagnosis is a key element in autonomous operation of space power systems such as Space Station's. A rule-based diagnostic system has been developed for determining the cause of degraded performance. The knowledge required for such diagnosis is elicited from the system engineering process by using traditional failure analysis techniques. Symptoms, failures, causes, and detector information are represented with structured data; and diagnostic procedural knowledge is represented with rules. Detected symptoms instantiate failure modes and possible causes consistent with currently held beliefs about the likelihood of the cause. A diagnosis concludes with an explanation of the observed symptoms in terms of a chain of possible causes and subcauses.

Global Carbon Fiber Composites. Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Joshua A.; West, Devin

The objective of this study is to identify key opportunities in the carbon fiber (CF) supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas—wind energy, aerospace, automotive, and pressure vessels—that top the list of industries using CF and carbon fiber reinforced polymers (CFRP) and are particularly relevant to the mission of U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE EERE). For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fibermore » and components.« less

Fish traders as key actors in fisheries: gender and adaptive management.

PubMed

Fröcklin, Sara; de la Torre-Castro, Maricela; Lindström, Lars; Jiddawi, Narriman S

2013-12-01

This paper fills an important gap towards adaptive management of small-scale fisheries by analyzing the gender dimension of fish trade in Zanzibar, Tanzania. We hypothesize that gender-based differences are present in the fish value chain and to test the hypothesis interviews were performed to analyze: (i) markets, customers, and mobility, (ii) material and economic resources, (iii) traded fish species, (iv) contacts and organizations, and (v) perceptions and experiences. Additionally, management documents were analyzed to examine the degree to which gender is considered. Results show that women traders had less access to social and economic resources, profitable markets, and high-value fish, which resulted in lower income. These gender inequalities are linked, among others, to women's reproductive roles such as childcare and household responsibilities. Formal fisheries management was found to be gender insensitive, showing how a crucial feedback element of adaptive management is missing in Zanzibar's management system, i.e., knowledge about key actors, their needs and challenges.

An Agent-Based Modeling Framework and Application for the Generic Nuclear Fuel Cycle

NASA Astrophysics Data System (ADS)

Gidden, Matthew J.

Key components of a novel methodology and implementation of an agent-based, dynamic nuclear fuel cycle simulator, Cyclus , are presented. The nuclear fuel cycle is a complex, physics-dependent supply chain. To date, existing dynamic simulators have not treated constrained fuel supply, time-dependent, isotopic-quality based demand, or fuel fungibility particularly well. Utilizing an agent-based methodology that incorporates sophisticated graph theory and operations research techniques can overcome these deficiencies. This work describes a simulation kernel and agents that interact with it, highlighting the Dynamic Resource Exchange (DRE), the supply-demand framework at the heart of the kernel. The key agent-DRE interaction mechanisms are described, which enable complex entity interaction through the use of physics and socio-economic models. The translation of an exchange instance to a variant of the Multicommodity Transportation Problem, which can be solved feasibly or optimally, follows. An extensive investigation of solution performance and fidelity is then presented. Finally, recommendations for future users of Cyclus and the DRE are provided.

A bibliometric analysis of research updates and tendencies on steroid biotransformation

NASA Astrophysics Data System (ADS)

Song, Zhaoyu

2018-03-01

Steroid biotransformation, as a powerful tool for generation of steroid active pharmaceutical ingredients and key intermediates, has received widespread attention with increasing market demand for steroid-based drugs. In our study, a bibliometric analysis of steroid biotransformation was performed to trace the research updates and tendencies from 1993 to 2016, based on the Science Citation Index Expanded (SCIE) database. Results showed a notable growth trend in publication outputs. Although the USA was the most productive country between 1993 and 2016, developing nations, including China and India, contributed the prominent growth in recent years (2005–2016). Steroids was the leading journal in this field, and the research outputs had notably increased in the field of ‘Chemistry’, ‘Pharmacology and Pharmacy’ and ‘Biotechnology and Applied Microbiology’. Finally, research focused mainly on the efficient production of novel steroid active pharmaceutical ingredients and key intermediates through steroid biotransformation. Furthermore, cytochrome P450 involved in the side-chain oxidation of sterols has gradually become a hotspot issue in recent years.

Defense Acquisition Reform: Background, Analysis, and Issues for Congress

DTIC Science & Technology

2014-05-23

individuals in line management .... the key to effective execution of any contract is not the quality of the contract, it is the quality of the...yielded only limited results due in large part to poor workforce management . Most reports have concluded that the key to good acquisitions is having a...Supply Chain Management ......................................................................... 21 Figures Figure 1. Contract Obligations, by

The effect of polymer architecture on the interdiffusion in thin polymer films

NASA Astrophysics Data System (ADS)

Caglayan, Ayse; Yuan, Guangcui; Satija, Sushil K.; Uhrig, David; Hong, Kunlun; Akgun, Bulent

Branched polymer chains have been traditionally used in industrial applications as additives. Recently they have found applications in electrochromic displays, lithography, biomedical coatings and targeting multidrug resistant bacteria. In some of these applications where they are confined in thin layers, it is important to understand the relation between the mobility and polymer chain architecture to optimize the processing conditions. Earlier interdiffusion measurements on linear and cyclic polymer chains demonstrated the key role of chain architecture on mobility. We have determined the vertical diffusion coefficients of the star polystyrene chains in thin films as a function of number of polymer arms, molecular weight per arm, and film thickness using neutron reflectivity (NR) and compare our results with linear chains of identical total molecular weight. Bilayer samples of 4-arm and 8-arm protonated polystyrenes (hPS) and deuterated polystyrenes (dPS) were used to elucidate the effect of polymer chain architecture on polymer diffusion. NR measurements indicate that the mobility of polymer chains in thin films get faster as the number of polymer arms increases and the arm molecular weight decreases. Both star polymers showed faster interdiffusion compared to their linear analog. Diffusion coefficient of branched PS chains has a weak dependence on the film thickness.

Computational intelligence for the Balanced Scorecard: studying performance trends of hemodialysis clinics.

PubMed

Cattinelli, Isabella; Bolzoni, Elena; Chermisi, Milena; Bellocchio, Francesco; Barbieri, Carlo; Mari, Flavio; Amato, Claudia; Menzer, Marcus; Stopper, Andrea; Gatti, Emanuele

2013-07-01

The Balanced Scorecard (BSC) is a general, widely employed instrument for enterprise performance monitoring based on the periodic assessment of strategic Key Performance Indicators that are scored against preset targets. The BSC is currently employed as an effective management support tool within Fresenius Medical Care (FME) and is routinely analyzed via standard statistical methods. More recently, the application of computational intelligence techniques (namely, self-organizing maps) to BSC data has been proposed as a way to enhance the quantity and quality of information that can be extracted from it. In this work, additional methods are presented to analyze the evolution of clinic performance over time. Performance evolution is studied at the single-clinic level by computing two complementary indexes that measure the proportion of time spent within performance clusters and improving/worsening trends. Self-organizing maps are used in conjunction with these indexes to identify the specific drivers of the observed performance. The performance evolution for groups of clinics is modeled under a probabilistic framework by resorting to Markov chain properties. These allow a study of the probability of transitioning between performance clusters as time progresses for the identification of the performance level that is expected to become dominant over time. We show the potential of the proposed methods through illustrative results derived from the analysis of BSC data of 109 FME clinics in three countries. We were able to identify the performance drivers for specific groups of clinics and to distinguish between countries whose performances are likely to improve from those where a decline in performance might be expected. According to the stationary distribution of the Markov chain, the expected trend is best in Turkey (where the highest performance cluster has the highest probability, P=0.46), followed by Portugal (where the second best performance cluster dominates, with P=0.50), and finally Italy (where the second best performance cluster has P=0.34). These results highlight the ability of the proposed methods to extract insights about performance trends that cannot be easily extrapolated using standard analyses and that are valuable in directing management strategies within a continuous quality improvement policy. Copyright © 2013 Elsevier B.V. All rights reserved.

12 CFR 328.3 - Official advertising statement requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... published by State or Federal law; (2) Insured depository institution supplies such as stationery (except... to, promotional items such as calendars, matchbooks, pens, pencils, and key chains; and (10...

Side-Chain Effects on the Thermoelectric Properties of Fluorene-Based Copolymers.

PubMed

Liang, Ansheng; Zhou, Xiaoyan; Zhou, Wenqiao; Wan, Tao; Wang, Luhai; Pan, Chengjun; Wang, Lei

2017-09-01

Three conjugated polymers with alkyl chains of different lengths are designed and synthesized, and their structure-property relationship as organic thermoelectric materials is systematically elucidated. All three polymers show similar photophysical properties, thermal properties, and mechanical properties; however, their thermoelectric performance is influenced by the length of their side chains. The length of the alkyl chain significantly influences the electrical conductivity of the conjugated polymers, and polymers with a short alkyl chain exhibit better conductivity than those with a long alkyl chain. The length of the alkyl chain has little effect on the Seebeck coefficient. Only a slight increase in the Seebeck coefficient is observed with the increasing length of the alkyl chain. The purpose of this study is to provide comprehensive insight into fine-tuning the thermoelectric properties of conjugated polymers as a function of side-chain engineering, thereby providing a novel perspective into the design of high-performance thermoelectric conjugated polymers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Steric interactions determine side-chain conformations in protein cores.

PubMed

Caballero, D; Virrueta, A; O'Hern, C S; Regan, L

2016-09-01

We investigate the role of steric interactions in defining side-chain conformations in protein cores. Previously, we explored the strengths and limitations of hard-sphere dipeptide models in defining sterically allowed side-chain conformations and recapitulating key features of the side-chain dihedral angle distributions observed in high-resolution protein structures. Here, we show that modeling residues in the context of a particular protein environment, with both intra- and inter-residue steric interactions, is sufficient to specify which of the allowed side-chain conformations is adopted. This model predicts 97% of the side-chain conformations of Leu, Ile, Val, Phe, Tyr, Trp and Thr core residues to within 20°. Although the hard-sphere dipeptide model predicts the observed side-chain dihedral angle distributions for both Thr and Ser, the model including the protein environment predicts side-chain conformations to within 20° for only 60% of core Ser residues. Thus, this approach can identify the amino acids for which hard-sphere interactions alone are sufficient and those for which additional interactions are necessary to accurately predict side-chain conformations in protein cores. We also show that our approach can predict alternate side-chain conformations of core residues, which are supported by the observed electron density. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Improving radiopharmaceutical supply chain safety by implementing bar code technology.

PubMed

Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc

2014-11-01

The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.

Force decay evaluation of thermoplastic and thermoset elastomeric chains: A mechanical design comparison.

PubMed

Masoud, Ahmed I; Tsay, T Peter; BeGole, Ellen; Bedran-Russo, Ana K

2014-11-01

To compare the following over a period of 8 weeks: (1) force decay between thermoplastic (TP) and thermoset (TS) elastomeric chains; (2) force decay between light (200-g) and heavy (350-g) initial forces; and (3) force decay between direct chains and chain loops (stretched from one pin around the second pin and back to the first pin). TP and TS chains were obtained from American Orthodontics™ (AOTP, AOTS) and ORMCO™ (OrTP, OrTS). Each of the four chain groups was subdivided into four subgroups with 10 specimens per subgroup: (1) direct chains light force, (2) direct chains heavy force, (3) chain loops light force, and (4) chain loops heavy force. The experiment was performed in artificial saliva (pH of 6.75) at 37°C. A significant difference was found between TP and TS chains, with an average mean difference of around 20% more force decay found in the TP chains (P < .001, α  =  .05). There was no significant difference between direct chains and chain loops except in OrTP, in which direct chains showed more force decay. There was also no significant difference in force decay identified when using light vs heavy forces. TS chains decayed less than TP chains, and chain loop retraction was beneficial only when using OrTP chains. Contrary to the interchangeable use of TP and TS chains in the published literature and in clinical practice, this study demonstrates that they perform differently under stress and that a clear distinction should be made between the two.

Improving queuing service at McDonald's

NASA Astrophysics Data System (ADS)

Koh, Hock Lye; Teh, Su Yean; Wong, Chin Keat; Lim, Hooi Kie; Migin, Melissa W.

2014-07-01

Fast food restaurants are popular among price-sensitive youths and working adults who value the conducive environment and convenient services. McDonald's chains of restaurants promote their sales during lunch hours by offering package meals which are perceived to be inexpensive. These promotional lunch meals attract good response, resulting in occasional long queues and inconvenient waiting times. A study is conducted to monitor the distribution of waiting time, queue length, customer arrival and departure patterns at a McDonald's restaurant located in Kuala Lumpur. A customer survey is conducted to gauge customers' satisfaction regarding waiting time and queue length. An android app named Que is developed to perform onsite queuing analysis and report key performance indices. The queuing theory in Que is based upon the concept of Poisson distribution. In this paper, Que is utilized to perform queuing analysis at this McDonald's restaurant with the aim of improving customer service, with particular reference to reducing queuing time and shortening queue length. Some results will be presented.

A High Performance Computing Study of a Scalable FISST-Based Approach to Multi-Target, Multi-Sensor Tracking

NASA Astrophysics Data System (ADS)

Hussein, I.; Wilkins, M.; Roscoe, C.; Faber, W.; Chakravorty, S.; Schumacher, P.

2016-09-01

Finite Set Statistics (FISST) is a rigorous Bayesian multi-hypothesis management tool for the joint detection, classification and tracking of multi-sensor, multi-object systems. Implicit within the approach are solutions to the data association and target label-tracking problems. The full FISST filtering equations, however, are intractable. While FISST-based methods such as the PHD and CPHD filters are tractable, they require heavy moment approximations to the full FISST equations that result in a significant loss of information contained in the collected data. In this paper, we review Smart Sampling Markov Chain Monte Carlo (SSMCMC) that enables FISST to be tractable while avoiding moment approximations. We study the effect of tuning key SSMCMC parameters on tracking quality and computation time. The study is performed on a representative space object catalog with varying numbers of RSOs. The solution is implemented in the Scala computing language at the Maui High Performance Computing Center (MHPCC) facility.

Designing Performance Measurement For Supply Chain's Actors And Regulator Using Scale Balanced Scorecard And Data Envelopment Analysis

NASA Astrophysics Data System (ADS)

Kusrini, Elisa; Subagyo; Aini Masruroh, Nur

2016-01-01

This research is a sequel of the author's earlier conducted researches in the fields of designing of integrated performance measurement between supply chain's actors and regulator. In the previous paper, the design of performance measurement is done by combining Balanced Scorecard - Supply Chain Operation Reference - Regulator Contribution model and Data Envelopment Analysis. This model referred as B-S-Rc-DEA model. The combination has the disadvantage that all the performance variables have the same weight. This paper investigates whether by giving weight to performance variables will produce more sensitive performance measurement in detecting performance improvement. Therefore, this paper discusses the development of the model B-S-Rc-DEA by giving weight to its performance'variables. This model referred as Scale B-S-Rc-DEA model. To illustrate the model of development, some samples from small medium enterprises of leather craft industry supply chain in province of Yogyakarta, Indonesia are used in this research. It is found that Scale B-S-Rc-DEA model is more sensitive to detecting performance improvement than B-S- Rc-DEA model.

Space system operations and support cost analysis using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.; Moore, Arlene A.; Fairbairn, Robert E.

1990-01-01

This paper evaluates the use of Markov chain process in probabilistic life cycle cost analysis and suggests further uses of the process as a design aid tool. A methodology is developed for estimating operations and support cost and expected life for reusable space transportation systems. Application of the methodology is demonstrated for the case of a hypothetical space transportation vehicle. A sensitivity analysis is carried out to explore the effects of uncertainty in key model inputs.

Medicines counterfeiting is a complex problem: a review of key challenges across the supply chain.

PubMed

Tremblay, Michael

2013-02-01

The paper begins by asking why there is a market for counterfeit medicines, which in effect creates the problem of counterfeiting itself. Contributing factors include supply chain complexity and the lack of whole-systems thinking. These two underpin the author's view that counterfeiting is a complex (i.e. wicked) problem, and that corporate, public policy and regulatory actions need to be mindful of how their actions may be causal. The paper offers a problem-based review of key components of this complexity, viz., the knowledge end-users/consumers have of medicines; whether restrictive information policies may hamper information provision to patients; the internet's direct access to consumers; internet-enabled distribution of unsafe and counterfeit medicines; whether the internet is a parallel and competitive supply chain to legitimate routes; organised crime as an emerging medicines manufacturer and supplier and whether substandard medicines is really the bigger problem. Solutions respect the perceived complexity of the supply chain challenges. The paper identifies the need to avoid technologically-driven solutions, calling for 'technological agnosticism'. Both regulation and public policy need to reflect the dynamic nature of the problem and avoid creating perverse incentives; it may be, for instance, that medicines pricing and reimbursement policies, which affect consumer/patient access may act as market signals to counterfeiters, since this creates a cash market in cheaper drugs.

Majorana spin in magnetic atomic chain systems

NASA Astrophysics Data System (ADS)

Li, Jian; Jeon, Sangjun; Xie, Yonglong; Yazdani, Ali; Bernevig, B. Andrei

2018-03-01

In this paper, we establish that Majorana zero modes emerging from a topological band structure of a chain of magnetic atoms embedded in a superconductor can be distinguished from trivial localized zero energy states that may accidentally form in this system using spin-resolved measurements. To demonstrate this key Majorana diagnostics, we study the spin composition of magnetic impurity induced in-gap Shiba states in a superconductor using a hybrid model. By examining the spin and spectral densities in the context of the Bogoliubov-de Gennes (BdG) particle-hole symmetry, we derive a sum rule that relates the spin densities of localized Shiba states with those in the normal state without superconductivity. Extending our investigations to a ferromagnetic chain of magnetic impurities, we identify key features of the spin properties of the extended Shiba state bands, as well as those associated with a localized Majorana end mode when the effect of spin-orbit interaction is included. We then formulate a phenomenological theory for the measurement of the local spin densities with spin-polarized scanning tunneling microscopy (STM) techniques. By combining the calculated spin densities and the measurement theory, we show that spin-polarized STM measurements can reveal a sharp contrast in spin polarization between an accidental-zero-energy trivial Shiba state and a Majorana zero mode in a topological superconducting phase in atomic chains. We further confirm our results with numerical simulations that address generic parameter settings.

Enterprise Sustainment Metrics

DTIC Science & Technology

2015-06-19

Ponte Verde Beach: Supply Chain Management Institute. Lambert, D. M., & Pohlen, T. L. (2014). Supply Chain Metrics. In D. M. Lambert, Supply Chain...Partnerships, Performance (pp. 239-256). Ponte Verde Beach: Supply Chain Management Institute Mills, J. S. (1843). A System of Logic, Ratiocinative and

A balloon-borne prototype for demonstrating the concept of JEM-EUSO

NASA Astrophysics Data System (ADS)

von Ballmoos, P.; Santangelo, A.; Adams, J. H.; Barrillon, P.; Bayer, J.; Bertaina, M.; Cafagna, F.; Casolino, M.; Dagoret, S.; Danto, P.; Distratis, G.; Dupieux, M.; Ebersoldt, A.; Ebisuzaki, T.; Evrard, J.; Gorodetzky, Ph.; Haungs, A.; Jung, A.; Kawasaki, Y.; Medina-Tanco, G.; Mot, B.; Osteria, G.; Parizot, E.; Park, I. H.; Picozza, P.; Prévôt, G.; Prieto, H.; Ricci, M.; Rodríguez Frías, M. D.; Roudil, G.; Scotti, V.; Szabelski, J.; Takizawa, Y.; Tusno, K.

2014-05-01

EUSO-BALLOON has been conceived as a pathfinder for JEM-EUSO, a mission concept for a space-borne wide-field telescope monitoring the Earth's nighttime atmosphere with the objective of recording the ultraviolet light from tracks initiated by ultra-high energy cosmic rays. Through a series of stratospheric balloon flights performed by the French Space Agency CNES, EUSO-BALLOON will serve as a test-bench for the key technologies of JEM-EUSO. EUSO-BALLOON shall perform an end-to-end test of all subsystems and components, and prove the global detection chain while improving our knowledge of the atmospheric and terrestrial ultraviolet background. The balloon-instrument also has the potential to detect for the first time UV-light generated by atmospheric air-shower from above, marking a milestone in the development of UHECR science, and paving the way for any future large scale, space-based ultra-high energy cosmic ray observatory.

High-speed low-complexity video coding with EDiCTius: a DCT coding proposal for JPEG XS

NASA Astrophysics Data System (ADS)

Richter, Thomas; Fößel, Siegfried; Keinert, Joachim; Scherl, Christian

2017-09-01

In its 71th meeting, the JPEG committee issued a call for low complexity, high speed image coding, designed to address the needs of low-cost video-over-ip applications. As an answer to this call, Fraunhofer IIS and the Computing Center of the University of Stuttgart jointly developed an embedded DCT image codec requiring only minimal resources while maximizing throughput on FPGA and GPU implementations. Objective and subjective tests performed for the 73rd meeting confirmed its excellent performance and suitability for its purpose, and it was selected as one of the two key contributions for the development of a joined test model. In this paper, its authors describe the design principles of the codec, provide a high-level overview of the encoder and decoder chain and provide evaluation results on the test corpus selected by the JPEG committee.

Resistance to Change and Preference for Variable versus Fixed Response Sequences

ERIC Educational Resources Information Center

Arantes, Joana; Berg, Mark E.; Le, Dien; Grace, Randolph C.

2012-01-01

In Experiment 1, 4 pigeons were trained on a multiple chain schedule in which the initial link was a variable-interval (VI) 20-s schedule signalled by a red or green center key, and terminal links required four responses made to the left (L) and/or right (R) keys. In the REPEAT component, signalled by red keylights, only LRLR terminal-link…

Model systems for single molecule polymer dynamics

PubMed Central

Latinwo, Folarin

2012-01-01

Double stranded DNA (dsDNA) has long served as a model system for single molecule polymer dynamics. However, dsDNA is a semiflexible polymer, and the structural rigidity of the DNA double helix gives rise to local molecular properties and chain dynamics that differ from flexible chains, including synthetic organic polymers. Recently, we developed single stranded DNA (ssDNA) as a new model system for single molecule studies of flexible polymer chains. In this work, we discuss model polymer systems in the context of “ideal” and “real” chain behavior considering thermal blobs, tension blobs, hydrodynamic drag and force–extension relations. In addition, we present monomer aspect ratio as a key parameter describing chain conformation and dynamics, and we derive dynamical scaling relations in terms of this molecular-level parameter. We show that asymmetric Kuhn segments can suppress monomer–monomer interactions, thereby altering global chain dynamics. Finally, we discuss ssDNA in the context of a new model system for single molecule polymer dynamics. Overall, we anticipate that future single polymer studies of flexible chains will reveal new insight into the dynamic behavior of “real” polymers, which will highlight the importance of molecular individualism and the prevalence of non-linear phenomena. PMID:22956980

Beta-ketoacyl-acyl carrier protein synthase IV: a key enzyme for regulation of medium-chain fatty acid synthesis in Cuphea lanceolata seeds.

PubMed

Schütt, Burkhardt Siegfried; Abbadi, Amine; Loddenkötter, Brigitte; Brummel, Monika; Spener, Friedrich

2002-09-01

With the aim of elucidating the mechanisms involved in the biosynthesis of medium-chain fatty acids in Cuphea lanceolata Ait., a crop accumulating up to 90% decanoic acid in seed triacylglycerols, cDNA clones of a beta-ketoacyl-acyl carrier protein (ACP) synthase IV (clKAS IV, EC 2.3.1.41) were isolated from C. lanceolata seed embryos. The amino acid sequence deduced from clKAS IV cDNA showed 80% identity to other plant KAS II-type enzymes, 55% identity towards plant KAS I and over 90% towards other Cuphea KAS IV-type sequences. Recombinant clKAS IV was functionally overexpressed in Escherichia coli, and substrate specificity of purified enzyme showed strong preference for elongation of short-chain and medium-chain acyl-ACPs (C4- to C10-ACP) with nearly equal activity. Further elongation steps were catalysed with distinctly less activity. Moreover, short- and medium-chain acyl-ACPs exerted a chain-length-specific and concentration-dependent substrate inhibition of clKAS IV. Based on these findings a regulatory mechanism for medium-chain fatty acid synthesis in C. lanceolata is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Steven K

The U.S. Department of Energy (DOE) has a significant programmatic interest in the safe and secure routing and transportation of Spent Nuclear Fuel (SNF) and High Level Waste (HLW) in the United States, including shipments entering the country from locations outside U.S borders. In any shipment of SNF/HLW, there are multiple chains; a jurisdictional chain as the material moves between jurisdictions (state, federal, tribal, administrative), a physical supply chain (which mode), as well as a custody chain (which stakeholder is in charge/possession) of the materials being transported. Given these interconnected networks, there lies vulnerabilities, whether in lack of communication betweenmore » interested stakeholders or physical vulnerabilities such as interdiction. By identifying key links and nodes as well as administrative weaknesses, decisions can be made to harden the physical network and improve communication between stakeholders. This paper examines the parallel chains of oversight and custody as well as the chain of stakeholder interests for the shipments of SNF/HLW and the potential impacts on systemic resiliency. Using the Crystal River shutdown location as well as a hypothetical international shipment brought into the United States, this paper illustrates the parallel chains and maps them out visually.« less

Electron transport chains in organohalide-respiring bacteria and bioremediation implications.

PubMed

Wang, Shanquan; Qiu, Lan; Liu, Xiaowei; Xu, Guofang; Siegert, Michael; Lu, Qihong; Juneau, Philippe; Yu, Ling; Liang, Dawei; He, Zhili; Qiu, Rongliang

In situ remediation employing organohalide-respiring bacteria represents a promising solution for cleanup of persistent organohalide pollutants. The organohalide-respiring bacteria conserve energy by utilizing H 2 or organic compounds as electron donors and organohalides as electron acceptors. Reductive dehalogenase (RDase), a terminal reductase of the electron transport chain in organohalide-respiring bacteria, is the key enzyme that catalyzes halogen removal. Accumulating experimental evidence thus far suggests that there are distinct models for respiratory electron transfer in organohalide-respirers of different lineages, e.g., Dehalococcoides, Dehalobacter, Desulfitobacterium and Sulfurospirillum. In this review, to connect the knowledge in organohalide-respiratory electron transport chains to bioremediation applications, we first comprehensively review molecular components and their organization, together with energetics of the organohalide-respiratory electron transport chains, as well as recent elucidation of intramolecular electron shuttling and halogen elimination mechanisms of RDases. We then highlight the implications of organohalide-respiratory electron transport chains in stimulated bioremediation. In addition, major challenges and further developments toward understanding the organohalide-respiratory electron transport chains and their bioremediation applications are identified and discussed. Copyright © 2018 Elsevier Inc. All rights reserved.

Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

NASA Astrophysics Data System (ADS)

Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

2011-05-01

The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current `metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of advanced lightweight structures for new generation vehicles in the context of whole life performance parameters.

The Role of the Side Chain on the Performance of N-type Conjugated Polymers in Aqueous Electrolytes.

PubMed

Giovannitti, Alexander; Maria, Iuliana P; Hanifi, David; Donahue, Mary J; Bryant, Daniel; Barth, Katrina J; Makdah, Beatrice E; Savva, Achilleas; Moia, Davide; Zetek, Matyáš; Barnes, Piers R F; Reid, Obadiah G; Inal, Sahika; Rumbles, Garry; Malliaras, George G; Nelson, Jenny; Rivnay, Jonathan; McCulloch, Iain

2018-05-08

We report a design strategy that allows the preparation of solution processable n-type materials from low boiling point solvents for organic electrochemical transistors (OECTs). The polymer backbone is based on NDI-T2 copolymers where a branched alkyl side chain is gradually exchanged for a linear ethylene glycol-based side chain. A series of random copolymers was prepared with glycol side chain percentages of 0, 10, 25, 50, 75, 90, and 100 with respect to the alkyl side chains. These were characterized to study the influence of the polar side chains on interaction with aqueous electrolytes, their electrochemical redox reactions, and performance in OECTs when operated in aqueous electrolytes. We observed that glycol side chain percentages of >50% are required to achieve volumetric charging, while lower glycol chain percentages show a mixed operation with high required voltages to allow for bulk charging of the organic semiconductor. A strong dependence of the electron mobility on the fraction of glycol chains was found for copolymers based on NDI-T2, with a significant drop as alkyl side chains are replaced by glycol side chains.

Effect of Chain Conformation on the Single-Molecule Melting Force in Polymer Single Crystals: Steered Molecular Dynamics Simulations Study.

PubMed

Feng, Wei; Wang, Zhigang; Zhang, Wenke

2017-02-28

Understanding the relationship between polymer chain conformation as well as the chain composition within the single crystal and the mechanical properties of the corresponding single polymer chain will facilitate the rational design of high performance polymer materials. Here three model systems of polymer single crystals, namely poly(ethylene oxide) (PEO), polyethylene (PE), and nylon-66 (PA66) have been chosen to study the effects of chain conformation, helical (PEO) versus planar zigzag conformation (PE, PA66), and chain composition (PE versus PA66) on the mechanical properties of a single polymer chain. To do that, steered molecular dynamics simulations were performed on those polymer single crystals by pulling individual polymer chains out of the crystals. Our results show that the patterns of force-extension curve as well as the chain moving mode are closely related to the conformation of the polymer chain in the single crystal. In addition, hydrogen bonds can enhance greatly the force required to stretch the polymer chain out of the single crystal. The dynamic breaking and reformation of multivalent hydrogen bonds have been observed for the first time in PA66 at the single molecule level.

Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

NASA Astrophysics Data System (ADS)

Ma, K.; Thomassey, S.; Zeng, X.

2017-10-01

In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

Single-Chain Folding of Synthetic Polymers: A Critical Update.

PubMed

Altintas, Ozcan; Barner-Kowollik, Christopher

2015-11-23

The current contribution serves as a critical update to a previous feature article from us (Macromol. Rapid Commun. 2012, 33, 958-971), and highlights the latest advances in the preparation of single chain polymeric nanoparticles and initial-yet promising-attempts towards mimicking the structure of natural biomacromolecules via single-chain folding of well-defined linear polymers via so-called single chain selective point folding and repeat unit folding. The contribution covers selected examples from the literature published up to ca. September 2015. Our aim is not to provide an exhaustive review but rather highlight a selection of new and exciting examples for single-chain folding based on advanced macromolecular precision chemistry. Initially, the discussion focuses on the synthesis and characterization of single-chain folded structures via selective point folding. The second part of the feature article addresses the folding of well-defined single-chain polymers by means of repeat unit folding. The current state of the art in the field of single-chain folding indicates that repeat unit folding-driven nanoparticle preparation is well-advanced, while initial encouraging steps towards building selective point folding systems have been taken. In addition, a summary of the-in our view-open key questions is provided that may guide future biomimetic design efforts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

ERIC Educational Resources Information Center

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

Analysis of correlated domain motions in IgG light chain reveals possible mechanisms of immunological signal transduction.

PubMed

Król, Marcin; Roterman, Irena; Piekarska, Barbara; Konieczny, Leszek; Rybarska, Janina; Stopa, Barbara; Spólnik, Paweł

2005-05-15

It was shown experimentally that binding of a micelle composed of Congo red molecules to immunological complexes leads to the enhanced stability of the latter, and simultaneously prevents binding of a complement molecule (C1q). The dye binds in a cavity created by the removal of N-terminal polypeptide chain, as observed experimentally in a model system-immunoglobulin G (IgG) light chain dimer. Molecular Dynamics (MD) simulations of three forms of IgG light chain dimer, with and without the dye, were performed to investigate the role of N-terminal fragment and self-assembled ligand in coupling between V and C domains. Root-mean-square distance (RMSD) time profiles show that removal of N-terminal fragment leads to destabilization of V domain. A micelle composed of four self-assembled dye molecules stabilizes and fixes the domain. Analysis of root-mean-square fluctuation (RMSF) values and dynamic cross-correlation matrices (DCCM) reveals that removal of N-terminal fragment results in complete decoupling between V and C domains. Binding of self-assembled Congo red molecules improves the coupling, albeit slightly. The disruption of a small beta-sheet composed of N- and C-terminal fragments of the domain (NC sheet) is the most likely reason for the decoupling. Self-assembled ligand, bound in the place originally occupied by N-terminal fragment, is not able to take over the function of the beta-sheet. Lack of correlation of motions between residues in V and C domains denotes that light chain-Congo red complexes have hampered ability to transmit conformational changes between domains. This is a likely explanation of the lack of complement binding by immunological complexes, which bind Congo red, and supports the idea that the NC sheet is the key structural fragment taking part in immunological signal transduction. Copyright 2005 Wiley-Liss, Inc.

Developing strategic planning of green supply chain in refinery CPO company

NASA Astrophysics Data System (ADS)

Hidayati, J.; Mumtaz, G.; Hasibuan, S.

2018-02-01

We are conducted a research at the company of the manufacturing CPO into cooking oil, margarine and materials of oleochemical industries. Today palm oil based industries are facing global challenges related to environmental issues. To against these challenges, it is necessary to have an environmentally friendly supply chain. However, the limited resource owned by the company requires the integrated environmental strategy with the company’s business strategy. The model is developed based on management orientation towards external pressure, internal key resources and competitive advantage that can be obtained as the decision factor. The decision-making method used is Analytical Network Process (ANP). The results obtained institutional pressure becomes the criterion with the greatest influence on green supply chain initiatives and sub criteria of customer desires and stakeholder integration having the most significant influence on green supply chain initiatives. There are five green alternative initiatives that can be done: green product design, greening upstream, greening production, greening downstream and greening post use. For green supply chain initiative, greening upstream is the best priority.

Robust optimization on sustainable biodiesel supply chain produced from waste cooking oil under price uncertainty.

PubMed

Zhang, Yong; Jiang, Yunjian

2017-02-01

Waste cooking oil (WCO)-for-biodiesel conversion is regarded as the "waste-to-wealthy" industry. This paper addresses the design of a WCO-for-biodiesel supply chain at both strategic and tactical levels. The supply chain of this problem is studied, which is based on a typical mode of the waste collection (from restaurants' kitchen) and conversion in the cities. The supply chain comprises three stakeholders: WCO supplier, integrated bio-refinery and demand zone. Three key problems should be addressed for the optimal design of the supply chain: (1) the number, sizes and locations of bio-refinery; (2) the sites and amount of WCO collected; (3) the transportation plans of WCO and biodiesel. A robust mixed integer linear model with muti-objective (economic, environmental and social objectives) is proposed for these problems. Finally, a large-scale practical case study is adopted based on Suzhou, a city in the east of China, to verify the proposed models. Copyright © 2016 Elsevier Ltd. All rights reserved.

Applying the Heuristic to the Risk Assessment within the Automotive Industry Supply Chain

NASA Astrophysics Data System (ADS)

Marasova, Daniela; Andrejiova, Miriam; Grincova, Anna

2017-03-01

Risk management facilitates risk identification, evaluation, control, and by means of appropriate set of measures, risk reduction or complete elimination. Therefore, the risk management becomes a strategic factor for a company's success. Properly implemented risk management system does not represent a tool to avoid the risk; it is used to understand the risk and provide the bases for strategic decision-making. Risk management represents a key factor for the supply chain operations. Managing the risks is crucial for achieving the customer satisfaction and thus also a company's success. The subject-matter of the article is the assessment of the supply chain in the automobile industry, in terms of risks. The topicality of this problem is even higher, as after the economic crisis it is necessary to revaluate the readiness of the supply chain for prospective risk conditions. One advantage of this article is the use of the Saaty method as a tool for the risk management within the supply chain.

Anomalous charge transport in conjugated polymers reveals underlying mechanisms of trapping and percolation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mollinger, Sonya A.; Salleo, Alberto; Spakowitz, Andrew J.

While transport in conjugated polymers has many similarities to that in crystalline inorganic materials, several key differences reveal the unique relationship between the morphology of polymer films and the charge mobility. We develop a model that directly incorporates the molecular properties of the polymer film and correctly predicts these unique transport features. At low degree of polymerization, the increase of the mobility with the polymer chain length reveals trapping at chain ends, and saturation of the mobility at high degree of polymerization results from conformational traps within the chains. Similarly, the inverse field dependence of the mobility reveals that transportmore » on single polymer chains is characterized by the ability of the charge to navigate around kinks and loops in the chain. Lastly, these insights emphasize the connection between the polymer conformations and the transport and thereby offer a route to designing improved device morphologies through molecular design and materials processing.« less

Anomalous charge transport in conjugated polymers reveals underlying mechanisms of trapping and percolation

DOE PAGES

Mollinger, Sonya A.; Salleo, Alberto; Spakowitz, Andrew J.

2016-11-10

While transport in conjugated polymers has many similarities to that in crystalline inorganic materials, several key differences reveal the unique relationship between the morphology of polymer films and the charge mobility. We develop a model that directly incorporates the molecular properties of the polymer film and correctly predicts these unique transport features. At low degree of polymerization, the increase of the mobility with the polymer chain length reveals trapping at chain ends, and saturation of the mobility at high degree of polymerization results from conformational traps within the chains. Similarly, the inverse field dependence of the mobility reveals that transportmore » on single polymer chains is characterized by the ability of the charge to navigate around kinks and loops in the chain. Lastly, these insights emphasize the connection between the polymer conformations and the transport and thereby offer a route to designing improved device morphologies through molecular design and materials processing.« less

Design jeans for recycling: a supply chain case study in The Netherlands.

PubMed

van Bommel, Harrie; Goorhuis, Maarten

2014-11-01

Because the insight is raising that waste prevention needs an integral product chain approach, a product chain project was awarded with an International Solid Waste Association grant. The project decided to focus on jeans because of the large environmental impacts of cotton and the low recycling rates. The project used an open innovative approach by involving many actors from the different phases of the chain and included student and applied researchers. In a 'design jeans for recycling' students' workshop, prototypes of jeans that are easier to recycle have been developed. Integrating the new generation from different disciplines in the project proved to be very successful. The results show that an open innovation process can lead to very creative ideas and that lessons learned from this project could be used to develop new chain projects for other products. An important condition is that key actors are willing to cooperate in an open innovation approach. © The Author(s) 2014.

12 CFR 740.5 - Requirements for the official advertising statement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advertising statement: (1) Credit union supplies such as stationery (except when used for circular letters..., including but not limited to, promotional items such as calendars, matchbooks, pens, pencils, and key chains...

12 CFR 740.5 - Requirements for the official advertising statement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advertising statement: (1) Credit union supplies such as stationery (except when used for circular letters..., including but not limited to, promotional items such as calendars, matchbooks, pens, pencils, and key chains...

12 CFR 740.5 - Requirements for the official advertising statement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advertising statement: (1) Credit union supplies such as stationery (except when used for circular letters..., including but not limited to, promotional items such as calendars, matchbooks, pens, pencils, and key chains...

Research on manufacturing service behavior modeling based on block chain theory

NASA Astrophysics Data System (ADS)

Zhao, Gang; Zhang, Guangli; Liu, Ming; Yu, Shuqin; Liu, Yali; Zhang, Xu

2018-04-01

According to the attribute characteristics of processing craft, the manufacturing service behavior is divided into service attribute, basic attribute, process attribute, resource attribute. The attribute information model of manufacturing service is established. The manufacturing service behavior information is successfully divided into public and private domain. Additionally, the block chain technology is introduced, and the information model of manufacturing service based on block chain principle is established, which solves the problem of sharing and secreting information of processing behavior, and ensures that data is not tampered with. Based on the key pairing verification relationship, the selective publishing mechanism for manufacturing information is established, achieving the traceability of product data, guarantying the quality of processing quality.

46 CFR 160.017-15 - Performance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

46 CFR 160.017-15 - Performance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

46 CFR 160.017-15 - Performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

46 CFR 160.017-15 - Performance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

46 CFR 160.017-15 - Performance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 6 2012-10-01 2012-10-01 false Performance. 160.017-15 Section 160.017-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Chain Ladder § 160.017-15 Performance. (a) Each chain ladder...

A density functional theory study on the carbon chain growth of ethanol formation on Cu-Co (111) and (211) surfaces

NASA Astrophysics Data System (ADS)

Ren, Bohua; Dong, Xiuqin; Yu, Yingzhe; Wen, Guobin; Zhang, Minhua

2017-08-01

Calculations based on the first-principle density functional theory were carried out to study the most controversial reactions in ethanol formation from syngas on Cu-Co surfaces: CO dissociation mechanism and the key reactions of carbon chain growth of ethanol formation (HCO insertion reactions) on four model surfaces (Cu-Co (111) and (211) with Cu-rich or Co-rich surfaces) to investigate the synergy of the Cu and Co components since the complete reaction network of ethanol formation from syngas is a huge computational burden to calculate on four Cu-Co surface models. We investigated adsorption of important species involved in these reactions, activation barrier and reaction energy of H-assisted dissociation mechanism, directly dissociation of CO, and HCO insertion reactions (CHx + HCO → CHxCHO (x = 1-3)) on four Cu-Co surface models. It was found that reactions on Cu-rich (111) and (211) surfaces all have lower activation barrier in H-assisted dissociation and HCO insertion reactions, especially CH + HCO → CHCHO reaction. The PDOS of 4d orbitals of surface Cu and Co atoms of all surfaces were studied. Analysis of d-band center of Cu and Co atoms and the activation barrier data suggested the correlation between electronic property and catalytic performance. Cu-Co bimetallic with Cu-rich surface allows Co to have higher catalytic activity through the interaction of Cu and Co atom. Then it will improve the adsorption of CO and catalytic activity of Co. Thus it is more favorable to the carbon chain growth in ethanol formation. Our study revealed the factors influencing the carbon chain growth in ethanol production and explained the internal mechanism from electronic property aspect.

Challenges and opportunities of health care supply chain management in the United States.

PubMed

Elmuti, Dean; Khoury, Grace; Omran, Omar; Abou-Zaid, Ahmed S

2013-01-01

This article explores current supply chain management challenges and initiatives and identifies problems that affect supply chain management success in the U.S. health-care industry. In addition, it investigates the impact of health care supply chain management (SCM) initiatives on the overall organizational effectiveness. The attitudinal results, as well as the performance results presented in this study support the claim of health care proponents that the SCM allows organizations to reduce cost, improve quality, and reduce cycle time, and leads to high performance.

Unraveling the mechanism of proton translocation in the extracellular half-channel of bacteriorhodopsin.

PubMed

Ge, Xiaoxia; Gunner, M R

2016-05-01

Bacteriorhodopsin, a light activated protein that creates a proton gradient in halobacteria, has long served as a simple model of proton pumps. Within bacteriorhodopsin, several key sites undergo protonation changes during the photocycle, moving protons from the higher pH cytoplasm to the lower pH extracellular side. The mechanism underlying the long-range proton translocation between the central (the retinal Schiff base SB216, D85, and D212) and exit clusters (E194 and E204) remains elusive. To obtain a dynamic view of the key factors controlling proton translocation, a systematic study using molecular dynamics simulation was performed for eight bacteriorhodopsin models varying in retinal isomer and protonation states of the SB216, D85, D212, and E204. The side-chain orientation of R82 is determined primarily by the protonation states of the residues in the EC. The side-chain reorientation of R82 modulates the hydrogen-bond network and consequently possible pathways of proton transfer. Quantum mechanical intrinsic reaction coordinate calculations of proton-transfer in the methyl guanidinium-hydronium-hydroxide model system show that proton transfer via a guanidinium group requires an initial geometry permitting proton donation and acceptance by the same amine. In all the bacteriorhodopsin models, R82 can form proton wires with both the CC and the EC connected by the same amine. Alternatively, rare proton wires for proton transfer from the CC to the EC without involving R82 were found in an O' state where the proton on D85 is transferred to D212. © 2016 Wiley Periodicals, Inc.

Seizing market shaping opportunities for vaccine cold chain equipment.

PubMed

Azimi, Tara; Franzel, Lauren; Probst, Nina

2017-04-19

Gavi, the Vaccine Alliance, supports immunisation programmes in eligible countries to reach children with lifesaving vaccines. Dramatic improvement in the scale and performance of current cold chain systems is required to extend the reach of immunisation services - especially for children living in remote locations - to advance progress towards full vaccine coverage. Achieving these improvements will require a healthier market for cold chain equipment where the products meet user needs, are sustainably priced, and are available in sufficient quantities to meet demand. Yet evidence suggests that the cold chain market has suffered from several failures including limited demand visibility, fragmented procurement, and insufficient information exchange between manufacturers and buyers on needs and equipment performance. One of Gavi's strategic goals is to shape markets for vaccines and other immunisation products, including cold chain equipment and in 2015, Gavi created a new mechanism - the Cold Chain Equipment (CCE) Optimisation Platform - to strengthen country cold chain systems by offering financial support and incentives for higher performing CCE. The main objective of the CCE Platform is to get more equipment that is efficient, sustainable, and better performing deployed to every health facility where it is required at an affordable price. To achieve these objectives, Gavi is putting in place tested market shaping approaches and tools adapted for the CCE market: the development of market strategies or 'roadmaps'; improvement of product performance through the development of target product profiles (TPPs); strategic engagement with CCE manufacturers and countries to enhance information sharing; and tailoring procurement tactics to the CCE market. These approaches and tools will allow for increased demand and supply of higher-performing, cost-effective and quality products. By strengthening immunisation systems with improved cold chain equipment, Gavi countries can begin to address the underlying problems limiting vaccine availability and improve the coverage and equity of vaccines. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Multicast Delayed Authentication For Streaming Synchrophasor Data in the Smart Grid

PubMed Central

Câmara, Sérgio; Anand, Dhananjay; Pillitteri, Victoria; Carmo, Luiz

2017-01-01

Multicast authentication of synchrophasor data is challenging due to the design requirements of Smart Grid monitoring systems such as low security overhead, tolerance of lossy networks, time-criticality and high data rates. In this work, we propose inf -TESLA, Infinite Timed Efficient Stream Loss-tolerant Authentication, a multicast delayed authentication protocol for communication links used to stream synchrophasor data for wide area control of electric power networks. Our approach is based on the authentication protocol TESLA but is augmented to accommodate high frequency transmissions of unbounded length. inf TESLA protocol utilizes the Dual Offset Key Chains mechanism to reduce authentication delay and computational cost associated with key chain commitment. We provide a description of the mechanism using two different modes for disclosing keys and demonstrate its security against a man-in-the-middle attack attempt. We compare our approach against the TESLA protocol in a 2-day simulation scenario, showing a reduction of 15.82% and 47.29% in computational cost, sender and receiver respectively, and a cumulative reduction in the communication overhead. PMID:28736582

The Mycotox Charter: Increasing Awareness of, and Concerted Action for, Minimizing Mycotoxin Exposure Worldwide.

PubMed

Logrieco, Antonio F; Miller, J David; Eskola, Mari; Krska, Rudolf; Ayalew, Amare; Bandyopadhyay, Ranajit; Battilani, Paola; Bhatnagar, Deepak; Chulze, Sofia; De Saeger, Sarah; Li, Peiwu; Perrone, Giancarlo; Poapolathep, Amnart; Rahayu, Endang S; Shephard, Gordon S; Stepman, François; Zhang, Hao; Leslie, John F

2018-04-04

Mycotoxins are major food contaminants affecting global food security, especially in low and middle-income countries. The European Union (EU) funded project, MycoKey, focuses on “Integrated and innovative key actions for mycotoxin management in the food and feed chains” and the right to safe food through mycotoxin management strategies and regulation, which are fundamental to minimizing the unequal access to safe and sufficient food worldwide. As part of the MycoKey project, a Mycotoxin Charter (charter.mycokey.eu) was launched to share the need for global harmonization of mycotoxin legislation and policies and to minimize human and animal exposure worldwide, with particular attention to less developed countries that lack effective legislation. This document is in response to a demand that has built through previous European Framework Projects—MycoGlobe and MycoRed—in the previous decade to control and reduce mycotoxin contamination worldwide. All suppliers, participants and beneficiaries of the food supply chain, for example, farmers, consumers, stakeholders, researchers, members of civil society and government and so forth, are invited to sign this charter and to support this initiative.

Multicast Delayed Authentication For Streaming Synchrophasor Data in the Smart Grid.

PubMed

Câmara, Sérgio; Anand, Dhananjay; Pillitteri, Victoria; Carmo, Luiz

2016-01-01

Multicast authentication of synchrophasor data is challenging due to the design requirements of Smart Grid monitoring systems such as low security overhead, tolerance of lossy networks, time-criticality and high data rates. In this work, we propose inf -TESLA, Infinite Timed Efficient Stream Loss-tolerant Authentication, a multicast delayed authentication protocol for communication links used to stream synchrophasor data for wide area control of electric power networks. Our approach is based on the authentication protocol TESLA but is augmented to accommodate high frequency transmissions of unbounded length. inf TESLA protocol utilizes the Dual Offset Key Chains mechanism to reduce authentication delay and computational cost associated with key chain commitment. We provide a description of the mechanism using two different modes for disclosing keys and demonstrate its security against a man-in-the-middle attack attempt. We compare our approach against the TESLA protocol in a 2-day simulation scenario, showing a reduction of 15.82% and 47.29% in computational cost, sender and receiver respectively, and a cumulative reduction in the communication overhead.

Modeling methodology for supply chain synthesis and disruption analysis

NASA Astrophysics Data System (ADS)

Wu, Teresa; Blackhurst, Jennifer

2004-11-01

The concept of an integrated or synthesized supply chain is a strategy for managing today's globalized and customer driven supply chains in order to better meet customer demands. Synthesizing individual entities into an integrated supply chain can be a challenging task due to a variety of factors including conflicting objectives, mismatched incentives and constraints of the individual entities. Furthermore, understanding the effects of disruptions occurring at any point in the system is difficult when working toward synthesizing supply chain operations. Therefore, the goal of this research is to present a modeling methodology to manage the synthesis of a supply chain by linking hierarchical levels of the system and to model and analyze disruptions in the integrated supply chain. The contribution of this research is threefold: (1) supply chain systems can be modeled hierarchically (2) the performance of synthesized supply chain system can be evaluated quantitatively (3) reachability analysis is used to evaluate the system performance and verify whether a specific state is reachable, allowing the user to understand the extent of effects of a disruption.

Total synthesis and structure-activity investigation of the marine natural product neopeltolide.

PubMed

Custar, Daniel W; Zabawa, Thomas P; Hines, John; Crews, Craig M; Scheidt, Karl A

2009-09-02

The total synthesis and biological evaluation of neopeltolide and analogs are reported. The key bond-forming step utilizes a Lewis acid-catalyzed intramolecular macrocyclization that installs the tetrahydropyran ring and macrocycle simultaneously. Independent of each other, neither the macrolide nor the oxazole side chain substituents of neopeltolide can inhibit the growth of cancer cell lines. The biological data of the analogs indicate that alterations to either the ester side chain or the stereochemistry of the macrolide result in a loss of biological activity.

Improving Department of Defense Global Distribution Performance Through Network Analysis

DTIC Science & Technology

2016-06-01

network performance increase. 14. SUBJECT TERMS supply chain metrics, distribution networks, requisition shipping time, strategic distribution database...peace and war” (p. 4). USTRANSCOM Metrics and Analysis Branch defines, develops, tracks, and maintains outcomes- based supply chain metrics to...2014a, p. 8). The Joint Staff defines a TDD standard as the maximum number of days the supply chain can take to deliver requisitioned materiel

Effect of chain rigidity on network architecture and deformation behavior of glassy polymer networks

NASA Astrophysics Data System (ADS)

Knowles, Kyler Reser

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of the polymer matrix in regards to strain storage and relaxation mechanisms which ultimately control composite performance throughout manufacturing and use. Through the use of a non-contact, full-field strain measurement technique known as digital image correlation (DIC), we describe and implement useful experiments which quantify matrix and composite parameters necessary for simulation efforts and failure models. The methods are compared to more traditional techniques and show excellent correlation. Further, we established relationships which represent matrix-fiber compatibility in regards to critical processing constraints. The second approach involves a systematic study of epoxy-amine networks which are chemically-similar but differ in chain segment rigidity. Prior research has investigated the isomer effect of glassy polymers, showing sizeable differences in thermal, volumetric, physical, and mechanical properties. This work builds on these themes and shows the apparent isomer effect is rather an effect of chain rigidity. Indeed, it was found that structurally-dissimilar polymer networks exhibit very similar properties as a consequence of their shared average network rigidity. Differences in chain packing, as a consequence of chain rigidity, were shown to alter the physical, volumetric, and mechanical properties of the glassy networks. Chain rigidity was found to directly control deformation mechanisms, which were related to the yielding behavior of the epoxy network series. The unique benefit to our approach is the ability to separate the role of rigidity - an intramolecular parameter - from intermolecular phenomena which otherwise influence network properties.

Voluntary medical male circumcision: logistics, commodities, and waste management requirements for scale-up of services.

PubMed

Edgil, Dianna; Stankard, Petra; Forsythe, Steven; Rech, Dino; Chrouser, Kristin; Adamu, Tigistu; Sakallah, Sameer; Thomas, Anne Goldzier; Albertini, Jennifer; Stanton, David; Dickson, Kim Eva; Njeuhmeli, Emmanuel

2011-11-01

The global HIV prevention community is implementing voluntary medical male circumcision (VMMC) programs across eastern and southern Africa, with a goal of reaching 80% coverage in adult males by 2015. Successful implementation will depend on the accessibility of commodities essential for VMMC programming and the appropriate allocation of resources to support the VMMC supply chain. For this, the United States President's Emergency Plan for AIDS Relief, in collaboration with the World Health Organization and the Joint United Nations Programme on HIV/AIDS, has developed a standard list of commodities for VMMC programs. This list of commodities was used to inform program planning for a 1-y program to circumcise 152,000 adult men in Swaziland. During this process, additional key commodities were identified, expanding the standard list to include commodities for waste management, HIV counseling and testing, and the treatment of sexually transmitted infections. The approximate costs for the procurement of commodities, management of a supply chain, and waste disposal, were determined for the VMMC program in Swaziland using current market prices of goods and services. Previous costing studies of VMMC programs did not capture supply chain costs, nor the full range of commodities needed for VMMC program implementation or waste management. Our calculations indicate that depending upon the volume of services provided, supply chain and waste management, including commodities and associated labor, contribute between US$58.92 and US$73.57 to the cost of performing one adult male circumcision in Swaziland. Experience with the VMMC program in Swaziland indicates that supply chain and waste management add approximately US$60 per circumcision, nearly doubling the total per procedure cost estimated previously; these additional costs are used to inform the estimate of per procedure costs modeled by Njeuhmeli et al. in "Voluntary Medical Male Circumcision: Modeling the Impact and Cost of Expanding Male Circumcision for HIV Prevention in Eastern and Southern Africa." Program planners and policy makers should consider the significant contribution of supply chain and waste management to VMMC program costs as they determine future resource needs for VMMC programs.

Demonstration of emulator-based Bayesian calibration of safety analysis codes: Theory and formulation

DOE PAGES

Yurko, Joseph P.; Buongiorno, Jacopo; Youngblood, Robert

2015-05-28

System codes for simulation of safety performance of nuclear plants may contain parameters whose values are not known very accurately. New information from tests or operating experience is incorporated into safety codes by a process known as calibration, which reduces uncertainty in the output of the code and thereby improves its support for decision-making. The work reported here implements several improvements on classic calibration techniques afforded by modern analysis techniques. The key innovation has come from development of code surrogate model (or code emulator) construction and prediction algorithms. Use of a fast emulator makes the calibration processes used here withmore » Markov Chain Monte Carlo (MCMC) sampling feasible. This study uses Gaussian Process (GP) based emulators, which have been used previously to emulate computer codes in the nuclear field. The present work describes the formulation of an emulator that incorporates GPs into a factor analysis-type or pattern recognition-type model. This “function factorization” Gaussian Process (FFGP) model allows overcoming limitations present in standard GP emulators, thereby improving both accuracy and speed of the emulator-based calibration process. Calibration of a friction-factor example using a Method of Manufactured Solution is performed to illustrate key properties of the FFGP based process.« less

Application of a transmission model to estimate performance objectives for Salmonella in the broiler supply chain.

PubMed

van der Fels-Klerx, H J; Tromp, S; Rijgersberg, H; van Asselt, E D

2008-11-30

The aim of the present study was to demonstrate how Performance Objectives (POs) for Salmonella at various points in the broiler supply chain can be estimated, starting from pre-set levels of the PO in finished products. The estimations were performed using an analytical transmission model, based on prevalence data collected throughout the chain in The Netherlands. In the baseline (current) situation, the end PO was set at 2.5% of the finished products (at end of processing) being contaminated with Salmonella. Scenario analyses were performed by reducing this baseline end PO to 1.5% and 0.5%. The results showed the end PO could be reduced by spreading the POs over the various stages of the broiler supply chain. Sensitivity analyses were performed by changing the values of the model parameters. Results indicated that, in general, decreasing Salmonella contamination between points in the chain is more effective in reducing the baseline PO than increasing the reduction of the pathogen, implying contamination should be prevented rather than treated. Application of both approaches at the same time showed to be most effective in reducing the end PO, especially at the abattoir and during processing. The modelling approach of this study proved to be useful to estimate the implications for preceding stages of the chain by setting a PO at the end of the chain as well as to evaluate the effectiveness of potential interventions in reducing the end PO. The model estimations may support policy-makers in their decision-making process with regard to microbiological food safety.

The sustainability and performance measurement on supply chain in services industry: A literature review

NASA Astrophysics Data System (ADS)

Leksono, Eko Budi; Suparno, Vanany, Iwan

2017-11-01

The services industry growth has been significant relation with economic growth. A new paradigm is needed for services sector development. The supply chain and performance measurement able to sustain of services industry growth. The supply chain implementation in the services industry called service supply chain (SSC). The globalization and stakeholder pressure makes operation of SSC should more attention to sustainability issue which consists of economic, social and environment simultaneously on SSC. Furthermore, services industry can develop by implementation of the sustainable SSC and its performance measurement. The sustainable SSC implementation can minimize of negative operation effect to environment and social, and maximize of profit. Sustainable service supply chain performance measurements (SSSCPM) are still less explored. The purpose of this paper is to review the literature in the field SSC, SSSC, SSC performance measurement (SSCPM) and SSSCPM for identification of the SSSCPM frameworks and indicators. Beside, the result of review able to look opportunities for develop a new framework for SSSCPM at the operational level, tactical and strategic, multiplayer and close loop, the effectiveness of the integration and development of modeling and simulation for evaluation in the future.

Gene expression analysis in hypoplastic lungs in the nitrofen model of congenital diaphragmatic hernia.

PubMed

Burgos, Carmen Mesas; Uggla, Andreas Ringman; Fagerström-Billai, Fredrik; Eklöf, Ann-Christine; Frenckner, Björn; Nord, Magnus

2010-07-01

Pulmonary hypoplasia and persistent pulmonary hypertension are the main causes of mortality and morbidity in newborns with congenital diaphragmatic hernia (CDH). Nitrofen is well known to induce CDH and lung hypoplasia in a rat model, but the mechanism remains unknown. To increase the understanding of the underlying pathogenesis of CDH, we performed a global gene expression analysis using microarray technology. Pregnant rats were given 100 mg nitrofen on gestational day 9.5 to create CDH. On day 21, fetuses after nitrofen administration and control fetuses were removed; and lungs were harvested. Global gene expression analysis was performed using Affymetrix Platform and the RAE 230 set arrays. For validation of microarray data, we performed real-time polymerase chain reaction and Western blot analysis. Significantly decreased genes after nitrofen administration included several growth factors and growth factors receptors involved in lung development, transcription factors, water and ion channels, and genes involved in angiogenesis and extracellular matrix. These results could be confirmed with real-time polymerase chain reaction and protein expression studies. The pathogenesis of lung hypoplasia and CDH in the nitrofen model includes alteration at a molecular level of several pathways involved in lung development. The complexity of the nitrofen mechanism of action reminds of human CDH; and the picture is consistent with lung hypoplasia and vascular disease, both important contributors to the high mortality and morbidity in CDH. Increased understanding of the molecular mechanisms that control lung growth may be the key to develop novel therapeutic techniques to stimulate pre- and postnatal lung growth. Copyright 2010 Elsevier Inc. All rights reserved.

Implementation of targeted medication adherence interventions within a community chain pharmacy practice: The Pennsylvania Project.

PubMed

Bacci, Jennifer L; McGrath, Stephanie Harriman; Pringle, Janice L; Maguire, Michelle A; McGivney, Melissa Somma

2014-01-01

To identify facilitators and barriers to implementing targeted medication adherence interventions in community chain pharmacies, and describe adaptations of the targeted intervention and organizational structure within each individual pharmacy practice. Qualitative study. Central and western Pennsylvania from February to April 2012. Rite Aid pharmacists staffed at the 118 Pennsylvania Project intervention sites. Qualitative analysis of pharmacists' perceptions of facilitators and barriers experienced, targeted intervention and organizational structure adaptations implemented, and training and preparation prior to implementation. A total of 15 key informant interviews were conducted from February to April 2012. Ten pharmacists from "early adopter" practices and five pharmacists from "traditionalist" practices were interviewed. Five themes emerged regarding the implementation of targeted interventions, including all pharmacists' need to understand the relationship of patient care programs to their corporation's vision; providing individualized, continual support and mentoring to pharmacists; anticipating barriers before implementation of patient care programs; encouraging active patient engagement; and establishing best practices regarding implementation of patient care services. This qualitative analysis revealed that there are a series of key steps that can be taken before the execution of targeted interventions that may promote successful implementation of medication therapy management in community chain pharmacies.

Research on the performance evaluation of agricultural products supply chain integrated operation

NASA Astrophysics Data System (ADS)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Performance of a portable chain flail delimber/debarker processing northern hardwoods.

Treesearch

Michael A. Thompson; John A. Sturos

1991-01-01

Evaluates the performance of a Peterson Pacific 4800 chain flail delimber/debarker processing pole-size hardwoods in northern Michigan. Describes the productivity, cost, and delimbing/debarking quality achieved by the flail.

CLIPS: A tool for the development and delivery of expert systems

NASA Technical Reports Server (NTRS)

Riley, Gary

1991-01-01

The C Language Integrated Production System (CLIPS) is a forward chaining rule-based language developed by the Software Technology Branch at the Johnson Space Center. CLIPS provides a complete environment for the construction of rule-based expert systems. CLIPS was designed specifically to provide high probability, low cost, and easy integration with external systems. Other key features of CLIPS include a powerful rule syntax, an interactive development environment, high performance, extensibility, a verification/validation tool, extensive documentation, and source code availability. The current release of CLIPS, version 4.3, is being used by over 2,500 users throughout the public and private community including: all NASA sites and branches of the military, numerous Federal bureaus, government contractors, 140 universities, and many companies.

Diketopyrrolopyrrole-based Conjugated Polymers Bearing Branched Oligo(Ethylene Glycol) Side Chains for Photovoltaic Devices.

PubMed

Chen, Xingxing; Zhang, Zijian; Ding, Zicheng; Liu, Jun; Wang, Lixiang

2016-08-22

Conjugated polymers are essential for solution-processable organic opto-electronic devices. In contrast to the great efforts on developing new conjugated polymer backbones, research on developing side chains is rare. Herein, we report branched oligo(ethylene glycol) (OEG) as side chains of conjugated polymers. Compared with typical alkyl side chains, branched OEG side chains endowed the resulting conjugated polymers with a smaller π-π stacking distance, higher hole mobility, smaller optical band gap, higher dielectric constant, and larger surface energy. Moreover, the conjugated polymers with branched OEG side chains exhibited outstanding photovoltaic performance in polymer solar cells. A power conversion efficiency of 5.37 % with near-infrared photoresponse was demonstrated and the device performance could be insensitive to the active layer thickness. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Pulsing of a focused mantle plume: Evidence from the distribution of foundation chain hotspot volcanism

NASA Astrophysics Data System (ADS)

O'Connor, John M.; Stoffers, Peter; Wijbrans, Jan R.

2002-05-01

Using the rare case of a hotspot chain crossing a fossil microplate, we reveal fundamental mantle plume characteristics by comparing hotspot volcanism in a sequence of contrasting tectonic settings. Key new 40Ar/39Ar ages show that the Foundation mantle plume pulses hot masses from depth with an apparent periodicity of one Myr. Synchronous magmatism over large distances indicates that masses associated with individual pulses are focused initially into similarly sized zones under the Pacific plate. Since the plume, spreading on impact with the lithosphere, influences a very wide area, apparently unconnected hotspot volcanism can be produced simultaneously across wide swaths, often crosscutting seamount chains. Our model might explain in part much of the midplate volcanism scattered across the Pacific seafloor indicating the episodic addition of significantly greater masses of plume material into the upper mantle than suggested by the narrowness of major seamount chains.

Supply chain model with price- and trade credit-sensitive demand under two-level permissible delay in payments

NASA Astrophysics Data System (ADS)

Giri, B. C.; Maiti, T.

2013-05-01

This article develops a single-manufacturer and single-retailer supply chain model under two-level permissible delay in payments when the manufacturer follows a lot-for-lot policy in response to the retailer's demand. The manufacturer offers a trade credit period to the retailer with the contract that the retailer must share a fraction of the profit earned during the trade credit period. On the other hand, the retailer provides his customer a partial trade credit which is less than that of the manufacturer. The demand at the retailer is assumed to be dependent on the selling price and the trade credit period offered to the customers. The average net profit of the supply chain is derived and an algorithm for finding the optimal solution is developed. Numerical examples are given to demonstrate the coordination policy of the supply chain and examine the sensitivity of key model-parameters.

Reducing ethylene levels along the food supply chain: a key to reducing food waste?

PubMed

Blanke, Michael M

2014-09-01

Excessive waste along the food supply chain of 71 (UK, Netherlands) to 82 (Germany) kg per head per year sparked widespread criticism of the agricultural food business and provides a great challenge and task for all its players and stakeholders. Origins of this food waste include private households, restaurants and canteens, as well as supermarkets, and indicate that 59-65% of this food waste can be avoided. Since ∼50% of the food waste is fruit and vegetables, monitoring and control of their natural ripening gas - ethylene - is suggested here as one possible key to reducing food waste. Ethylene accelerates ripening of climacteric fruits, and accumulation of ethylene in the supply chain can lead to fruit decay and waste. While ethylene was determined using a stationary gas chromatograph with gas cylinders, the new generation of portable sensor-based instruments now enables continuous in situ determination of ethylene along the food chain, a prerequisite to managing and maintaining the quality and ripeness of fruits and identifying hot spots of ethylene accumulation along the supply chain. Ethylene levels were measured in a first trial, along the supply chain of apple fruit from harvest to the consumer, and ranged from 10 ppb in the CA fruit store with an ethylene scrubber, 70 ppb in the fruit bin, to 500 ppb on the sorting belt in the grading facility, to ppm levels in perforated plastic bags of apples. This paper also takes into account exogenous ethylene originating from sources other than the fruit itself. Countermeasures are discussed, such as the potential of breeding for low-ethylene fruit, applications of ethylene inhibitors (e.g. 1-MCP) and absorber strips (e.g. 'It's Fresh', Ryan'), packages (e.g. 'Peakfresh'), both at the wholesale and retail level, vents and cooling for the supply chain, sale of class II produce ('Wunderlinge'), collection (rather than waste) of produce on the 'sell by' date ('Die Tafel') and whole crop purchase (WCP) to aid reducing food waste. © 2014 Society of Chemical Industry.

[Development of molecular detection of food-borne pathogenic bacteria using miniaturized microfluidic devices].

PubMed

Iván, Kristóf; Maráz, Anna

2015-12-20

Detection and identification of food-borne pathogenic bacteria are key points for the assurance of microbiological food safety. Traditional culture-based methods are more and more replaced by or supplemented with nucleic acid based molecular techniques, targeting specific (preferably virulence) genes in the genomes. Internationally validated DNA amplification - most frequently real-time polymerase chain reaction - methods are applied by the food microbiological testing laboratories for routine analysis, which will result not only in shortening the time for results but they also improve the performance characteristics (e.g. sensitivity, specificity) of the methods. Beside numerous advantages of the polymerase chain reaction based techniques for routine microbiological analysis certain drawbacks have to be mentioned, such as the high cost of the equipment and reagents, as well as the risk of contamination of the laboratory environment by the polymerase chain reaction amplicons, which require construction of an isolated laboratory system. Lab-on-a-chip systems can integrate most of these laboratory processes within a miniaturized device that delivers the same specificity and reliability as the standard protocols. The benefits of miniaturized devices are: simple - often automated - use, small overall size, portability, sterility due to single use possibility. These miniaturized rapid diagnostic tests are being researched and developed at the best research centers around the globe implementing various sample preparation and molecular DNA amplification methods on-chip. In parallel, the aim of the authors' research is to develop microfluidic Lab-on-a-chip devices for the detection and identification of food-borne pathogenic bacteria.

Investigation of phase transitions of saturated phosphocholine lipid bilayers via molecular dynamics simulations.

PubMed

Khakbaz, Pouyan; Klauda, Jeffery B

2018-08-01

Lipid bilayers play an important role in biological systems as they protect cells against unwanted chemicals and provide a barrier for material inside a cell from leaking out. In this paper, nearly 30 μs of molecular dynamics (MD) simulations were performed to investigate phase transitions of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dipalmitoyl-sn-glycero-phosphocholine (DPPC) lipid bilayers from the liquid crystalline (L α ) to the ripple (P β ) and to the gel phase (L β ). Our MD simulations accurately predict the main transition temperature for the single-component bilayers. A key focus of this work is to quantify the structure of the P β phase for DMPC and compare with measures from x-ray experiments. The P β major arm has similar structure to that of the L β , while the thinner minor arm has interdigitated chains and the transition region between these two regions has large chain splay and disorder. At lower temperatures, our MD simulations predict the formation of the L β phase with tilted fatty acid chains. The P β and L β phases are studied for mixtures of DMPC and DPPC and compare favorably with experiment. Overall, our MD simulations provide evidence for the relevancy of the CHARMM36 lipid force field for structures and add to our understanding of the less-defined P β phase. Copyright © 2018 Elsevier B.V. All rights reserved.

Expression of N-acetylgalactosamine 4-sulfate 6-O-sulfotransferase involved in chondroitin sulfate synthesis is responsible for pulmonary metastasis.

PubMed

Mizumoto, Shuji; Watanabe, Moto; Yamada, Shuhei; Sugahara, Kazuyuki

2013-01-01

Chondroitin sulfate (CS) containing E-disaccharide units, glucuronic acid-N-acetylgalactosamine(4, 6-O-disulfate), at surfaces of tumor cells plays a key role in tumor metastasis. However, the molecular mechanism of the metastasis involving the CS chain-containing E-units is not fully understood. In this study, to clarify the role of E-units in the metastasis and to search for potential molecular targets for anticancer drugs, the isolation and characterization of Lewis lung carcinoma (LLC) cells stably downregulated by the knockdown for the gene encoding N-acetylgalactosamine 4-O-sulfate 6-O-sulfotransferase (GalNAc4S-6ST), which is responsible for the formation of E-units in CS chains, were performed. Knockdown of GalNAc4S-6ST in LLC cells resulted in a reduction in the proportion of E-units, in adhesiveness to extracellular matrix adhesion molecules and in proliferation in vitro. Furthermore, the stable downregulation of GalNAc4S-6ST expression in LLC cells markedly inhibited the colonization of the lungs by inoculated LLC cells and invasive capacity of LLC cells. These results provide clear evidence that CS chain-containing E-units and/or GalNAc4S-6ST play a crucial role in pulmonary metastasis at least through the increased adhesion and the invasive capacity of LLC cells and also provides insights into future drug targets for anticancer treatment.

Dealing with large-scale supply lines when introducing new regimens.

PubMed

Malati, Christine; Rosenfeld, Joshua; Mowafy, Sherif; Rittmiller, Trevor; Kuritsky, Joel; Crowley, John

2017-07-01

As programs plan the introduction of a new antiretroviral as part of a regimen for HIV treatment, supply chain considerations need to be taken into account. The key to success is balancing the introduction of a new regimen with the phasing out of an old regimen in a manner that does not result in either a shortage or an excess supply of either product while ensuring that patients continue receiving their medications. This necessitates that country programs, donors, and procurement entities possess an appreciation of the global antiretroviral market and understand the dynamics that the manufacturing of new antiretrovirals will have on the transition. Supply, demand, and financial considerations affect the capacity of the supply chain to facilitate a successful antiretroviral transition. Although this commentary draws on United States Agency for International Development experiences under the President's Emergency Plan for AIDS Relief from earlier antiretroviral treatment shifts, the approaches are applicable to other institutions and to future transitions. Three approaches were employed: ensuring the engagement of all key stakeholders in transition planning and execution, including clinicians, advocacy groups, supply chain professionals, ministry, and donors; conducting and updating regularly the national quantification and supply plans for all regimens; and introducing antiretroviral products into programs from regional warehouses based on firm orders. Extensive planning and accounting for supply chain factors is essential to ensuring a smooth transition to a new regimen and to enable the global antiretroviral market to respond adequately.

Materials Flow through Industry Supply Chain Modeling Tool | Advanced

Science.gov Websites

efficiency. It also performs supply chain scale analyses to quantify the impacts and benefits of next , read Evaluating opportunities to improve material and energy impacts in commodity supply chains

Center for Corporate Climate Leadership Building Internal Support in Supply Chain Management

EPA Pesticide Factsheets

Organizations build support for addressing GHG emissions by developing key allies in business units, leveraging one business unit to drive change across the organization, and securing executive support while communicating resource needs.

The Politics of Global Value Chains: Import-dependent Firms and EU–Asia Trade Agreements

PubMed Central

Eckhardt, Jappe; Poletti, Arlo

2015-01-01

In 2006, the European Commission released its Global Europe Communication, in which it announced a shift from a multilateral to a bilateral trade strategy. One of the key pillars of this new strategy was to strengthen the bilateral trade relations with key Asian countries. In contrast to existing analyses that focus on European Union (EU) decision makers’ agency, we propose an explanation for this notable shift in the EU’s trade policy that stresses the political role of import-dependent firms. In light of the increasing integration of such firms into global value chains, the article argues that a plausible case can be made, both theoretically and empirically, that import-dependent firms had a clear stake in the signing of preferential trade agreements between the EU and Asian countries and that their lobbying efforts significantly affected the EU’s decision to start negotiations with South Korea, India and Vietnam. PMID:28018131

The Politics of Global Value Chains: Import-dependent Firms and EU-Asia Trade Agreements.

PubMed

Eckhardt, Jappe; Poletti, Arlo

2016-01-01

In 2006, the European Commission released its Global Europe Communication, in which it announced a shift from a multilateral to a bilateral trade strategy. One of the key pillars of this new strategy was to strengthen the bilateral trade relations with key Asian countries. In contrast to existing analyses that focus on European Union (EU) decision makers' agency, we propose an explanation for this notable shift in the EU's trade policy that stresses the political role of import-dependent firms. In light of the increasing integration of such firms into global value chains, the article argues that a plausible case can be made, both theoretically and empirically, that import-dependent firms had a clear stake in the signing of preferential trade agreements between the EU and Asian countries and that their lobbying efforts significantly affected the EU's decision to start negotiations with South Korea, India and Vietnam.

Resonant electron capture by aspartame and aspartic acid molecules.

PubMed

Muftakhov, M V; Shchukin, P V

2016-12-30

The processes for dissociative electron capture are the key mechanisms for decomposition of biomolecules, proteins in particular, under interaction with low-energy electrons. Molecules of aspartic acid and aspartame, i.e. modified dipeptides, were studied herein to define the impact of the side functional groups on peptide chain decomposition in resonant electron-molecular reactions. The processes of formation and decomposition of negative ions of both aspartame and aspartic acid were studied by mass spectrometry of negative ions under resonant electron capture. The obtained mass spectra were interpreted under thermochemical analysis by quantum chemical calculations. Main channels of negative molecular ions fragmentation were found and characteristic fragment ions were identified. The СООН fragment of the side chain in aspartic acid is shown to play a key role like the carboxyl group in amino acids and aliphatic oligopeptides. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Distributor- Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale.

PubMed

Mehralian, Gholamhossein; Babapour, Jafar; Peiravian, Farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor-retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor-retailer interface.

An extended patch-dynamic framework for food chains in fragmented landscapes

PubMed Central

Liao, Jinbao; Chen, Jiehong; Ying, Zhixia; Hiebeler, David E.; Nijs, Ivan

2016-01-01

Habitat destruction, a key determinant of species loss, can be characterized by two components, patch loss and patch fragmentation, where the former refers to the reduction in patch availability, and the latter to the division of the remaining patches. Classical metacommunity models have recently explored how food web dynamics respond to patch loss, but the effects of patch fragmentation have largely been overlooked. Here we develop an extended patch-dynamic model that tracks the patch occupancy of the various trophic links subject to colonization-extinction-predation dynamics by incorporating species dispersal with patch connectivity. We found that, in a simple food chain, species at higher trophic level become extinct sooner with increasing patch loss and fragmentation due to the constraint in resource availability, confirming the trophic rank hypothesis. Yet, effects of fragmentation on species occupancy are largely determined by patch loss, with maximal fragmentation effects occurring at intermediate patch loss. Compared to the spatially explicit simulations that we also performed, the current model with pair approximation generates similar community patterns especially in spatially clustered landscapes. Overall, our extended framework can be applied to model more complex food webs in fragmented landscapes, broadening the scope of existing metacommunity theory. PMID:27608823

Distributor– Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale

PubMed Central

Mehralian, Gholamhossein; Babapour, Jafar; peiravian, farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor–retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor–retailer interface. PMID:28243297

Chemical characterization of detrital sugar chains with peptides in oceanic surface particulate organic matter

NASA Astrophysics Data System (ADS)

Tsukasaki, A.; Nishida, T.; Tanoue, E.

2016-02-01

For better understanding of the dynamics of organic matter in the ocean interior, particulate organic matter (POM) in oceanic surface water is a key material as a starting material in food chain and biological carbon pump, and the source of dissolved organic matter. POM consists of a mixture of non-living POM (detritus) and small amount of living POM (organisms). Particulate combined amino acids (PCAAs) are one of the major components of POM and the most important source of nitrogen and carbon for heterotrophic organisms in marine environments. In our previous studies of molecular-level characterization of PCAAs using electrophoretic separation (SDS-PAGE: sodium dodecyl sulfate-polyacrylamide gel electrophoresis) with specific detection of protein/peptide and sugar chains, we reported that most of PCAAs existed as small-sized peptide chains with carbohydrate-rich remnants. Although carbohydrates are one of the major carbon components of POM, the details of molecular-level structures including sugar chains are unknown. In this study, we applied electrophoretic separation for sugar chains (FACE: fluorophore-assisted carbohydrate electrophoresis) to the POM samples collected from the surface water of the Pacific Ocean. The results showed that sugar chains with various degree of polymerization were detected in POM. The possible roles of such sugar chains in marine biogeochemical cycle of organic matter are discussed in the presentation.

Coordinating a supply chain with a loss-averse retailer and effort dependent demand.

PubMed

Li, Liying; Wang, Yong

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights.

Coordinating a Supply Chain with a Loss-Averse Retailer and Effort Dependent Demand

PubMed Central

Li, Liying

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights. PMID:25197696

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

NASA Astrophysics Data System (ADS)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

Identification of the Key Genes and Pathways in Esophageal Carcinoma.

PubMed

Su, Peng; Wen, Shiwang; Zhang, Yuefeng; Li, Yong; Xu, Yanzhao; Zhu, Yonggang; Lv, Huilai; Zhang, Fan; Wang, Mingbo; Tian, Ziqiang

2016-01-01

Objective . Esophageal carcinoma (EC) is a frequently common malignancy of gastrointestinal cancer in the world. This study aims to screen key genes and pathways in EC and elucidate the mechanism of it. Methods . 5 microarray datasets of EC were downloaded from Gene Expression Omnibus. Differentially expressed genes (DEGs) were screened by bioinformatics analysis. Gene Ontology (GO) enrichment, Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment, and protein-protein interaction (PPI) network construction were performed to obtain the biological roles of DEGs in EC. Quantitative real-time polymerase chain reaction (qRT-PCR) was used to verify the expression level of DEGs in EC. Results . A total of 1955 genes were filtered as DEGs in EC. The upregulated genes were significantly enriched in cell cycle and the downregulated genes significantly enriched in Endocytosis. PPI network displayed CDK4 and CCT3 were hub proteins in the network. The expression level of 8 dysregulated DEGs including CDK4, CCT3, THSD4, SIM2, MYBL2, CENPF, CDCA3, and CDKN3 was validated in EC compared to adjacent nontumor tissues and the results were matched with the microarray analysis. Conclusion . The significantly DEGs including CDK4, CCT3, THSD4, and SIM2 may play key roles in tumorigenesis and development of EC involved in cell cycle and Endocytosis.

Chain-Based Communication in Cylindrical Underwater Wireless Sensor Networks

PubMed Central

Javaid, Nadeem; Jafri, Mohsin Raza; Khan, Zahoor Ali; Alrajeh, Nabil; Imran, Muhammad; Vasilakos, Athanasios

2015-01-01

Appropriate network design is very significant for Underwater Wireless Sensor Networks (UWSNs). Application-oriented UWSNs are planned to achieve certain objectives. Therefore, there is always a demand for efficient data routing schemes, which can fulfill certain requirements of application-oriented UWSNs. These networks can be of any shape, i.e., rectangular, cylindrical or square. In this paper, we propose chain-based routing schemes for application-oriented cylindrical networks and also formulate mathematical models to find a global optimum path for data transmission. In the first scheme, we devise four interconnected chains of sensor nodes to perform data communication. In the second scheme, we propose routing scheme in which two chains of sensor nodes are interconnected, whereas in third scheme single-chain based routing is done in cylindrical networks. After finding local optimum paths in separate chains, we find global optimum paths through their interconnection. Moreover, we develop a computational model for the analysis of end-to-end delay. We compare the performance of the above three proposed schemes with that of Power Efficient Gathering System in Sensor Information Systems (PEGASIS) and Congestion adjusted PEGASIS (C-PEGASIS). Simulation results show that our proposed 4-chain based scheme performs better than the other selected schemes in terms of network lifetime, end-to-end delay, path loss, transmission loss, and packet sending rate. PMID:25658394

Can Simple Transmission Chains Foster Collective Intelligence in Binary-Choice Tasks?

PubMed

Moussaïd, Mehdi; Seyed Yahosseini, Kyanoush

2016-01-01

In many social systems, groups of individuals can find remarkably efficient solutions to complex cognitive problems, sometimes even outperforming a single expert. The success of the group, however, crucially depends on how the judgments of the group members are aggregated to produce the collective answer. A large variety of such aggregation methods have been described in the literature, such as averaging the independent judgments, relying on the majority or setting up a group discussion. In the present work, we introduce a novel approach for aggregating judgments-the transmission chain-which has not yet been consistently evaluated in the context of collective intelligence. In a transmission chain, all group members have access to a unique collective solution and can improve it sequentially. Over repeated improvements, the collective solution that emerges reflects the judgments of every group members. We address the question of whether such a transmission chain can foster collective intelligence for binary-choice problems. In a series of numerical simulations, we explore the impact of various factors on the performance of the transmission chain, such as the group size, the model parameters, and the structure of the population. The performance of this method is compared to those of the majority rule and the confidence-weighted majority. Finally, we rely on two existing datasets of individuals performing a series of binary decisions to evaluate the expected performances of the three methods empirically. We find that the parameter space where the transmission chain has the best performance rarely appears in real datasets. We conclude that the transmission chain is best suited for other types of problems, such as those that have cumulative properties.

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

NASA Astrophysics Data System (ADS)

Jiang, Yao; Li, Tie-Min; Wang, Li-Ping

2015-09-01

This paper investigates the stiffness modeling of compliant parallel mechanism (CPM) based on the matrix method. First, the general compliance matrix of a serial flexure chain is derived. The stiffness modeling of CPMs is next discussed in detail, considering the relative positions of the applied load and the selected displacement output point. The derived stiffness models have simple and explicit forms, and the input, output, and coupling stiffness matrices of the CPM can easily be obtained. The proposed analytical model is applied to the stiffness modeling and performance analysis of an XY parallel compliant stage with input and output decoupling characteristics. Then, the key geometrical parameters of the stage are optimized to obtain the minimum input decoupling degree. Finally, a prototype of the compliant stage is developed and its input axial stiffness, coupling characteristics, positioning resolution, and circular contouring performance are tested. The results demonstrate the excellent performance of the compliant stage and verify the effectiveness of the proposed theoretical model. The general stiffness models provided in this paper will be helpful for performance analysis, especially in determining coupling characteristics, and the structure optimization of the CPM.

Fine-tuning blend morphology via alkylthio side chain engineering towards high performance non-fullerene polymer solar cells

NASA Astrophysics Data System (ADS)

Li, Ling; Feng, Liuliu; Yuan, Jun; Peng, Hongjian; Zou, Yingping; Li, Yongfang

2018-03-01

Two medium bandgap polymers (ffQx-TS1, ffQx-TS2) were designed and synthesized to investigate the influence of different alkylthio side chain on the morphology and photovoltaic performance of non-fullerene polymer solar cells (PSCs). Both polymers exhibit similar molecular weights and comparable the highest occupied molecular orbital (HOMO) energy level. However, the polymer with straight alkylthio chain delivers a root-mean-square (RMS) of 0.86 nm, which is slightly lower than that with branched chain (1.40 nm). The lower RMS benefits the ohmic contact between the active lay and interface layer, thus enhanced short circuit current (Jsc) (from 13.54 mA cm-1 to 15.25 mA cm-1) could be obtained. Due to the enhancement of Jsc, better power conversion efficiency (PCE) of 7.69% for ffQx-TS2 could be realized. These results indicated that alkylthio side chain engineering is a promising method to improve photovoltaic performance.

Curcumin may serve an anticancer role in human osteosarcoma cell line U-2 OS by targeting ITPR1.

PubMed

Luo, Zhanpeng; Li, Dawei; Luo, Xiaobo; Li, Litao; Gu, Suxi; Yu, Long; Ma, Yuanzheng

2018-04-01

The present study aimed to determine the mechanisms of action of curcumin in osteosarcoma. Human osteosarcoma U-2 OS cells was purchased from the Cell Bank of the Chinese Academy of Sciences. RNA sequencing analysis was performed for 2 curcumin-treated samples and 2 control samples using Illumina deep sequencing technology. The differentially expressed genes were identified using Cufflink software. Enrichment and protein-protein interaction network analyses were performed separately using cluster Profiler package and Cytoscape software to identify key genes. Then, the mRNA levels of key genes were detected by quantitative reverse transcription polymerase chain reaction (RT-qPCR) in U-2 OS cells. Finally, cell apoptosis, proliferation, migration and invasion arrays were performed. In total, 201 DEGs were identified in the curcumin-treated group. EEF1A1 (degree=88), ATF7IP, HIF1A, SMAD7, CLTC, MCM10, ITPR1, ADAM15, WWP2 and ATP5C1, which were enriched in 'biological process', exhibited higher degrees than other genes in the PPI network. RT-qPCR demonstrated that treatment with curcumin was able to significantly increase the levels of CLTC and ITPR1 mRNA in curcumin-treated cells compared with control. In addition, targeting ITPR1 with curcumin significantly promoted apoptosis and suppressed proliferation, migration and invasion. Targeting ITPR1 via curcumin may serve an anticancer role by mediating apoptosis, proliferation, migration and invasion in U-2 OS cells.

Commitment to and preparedness for sustainable supply chain management in the oil and gas industry.

PubMed

Wan Ahmad, Wan Nurul K; Rezaei, Jafar; Tavasszy, Lóránt A; de Brito, Marisa P

2016-09-15

Our current dependency on the oil and gas (O&G) industry for economic development and social activities necessitates research into the sustainability of the industry's supply chains. At present, studies on sustainable supply chain management (SSCM) practices in the industry do not include firm-internal factors that affect the sustainability strategies employed by different functional areas of its supply chains. Our study aims to address this gap by identifying the relevant internal factors and exploring their relationship with SSCM strategies. Specifically, we discuss the commitment to and preparedness for sustainable practices of companies that operate in upstream and downstream O&G supply chain. We study the impact of these factors on their sustainability strategies of four key supply chain functions: supplier management, production management, product stewardship and logistics management. The analyses of data collected through a survey among 81 companies show that management preparedness may enhance sustainable supply chain strategies in the O&G industry more than commitment does. Among the preparedness measures, management of supply chain operational risks is found to be vital to the sustainability of all supply chain functions except for production management practices. The findings also highlight the central importance of supplier and logistics management to the achievement of sustainable O&G supply chains. Companies must also develop an organizational culture that encourages, for example, team collaboration and proactive behaviour to finding innovative sustainability solutions in order to translate commitment to sustainable practices into actions that can produce actual difference to their SSCM practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Enhancing Supply Chain Performance with Environmental Cost Information: Examples from Commonwealth Edison, Andersen Corporation, and Ashland Chemical

EPA Pesticide Factsheets

This collection of case studies illustrates how supply chain management practices can be improved by determining the financial impact of business activities that have an impact on a company’s environmental performance.

Chain Effects: The Impact of Academy Chains on Low Income Students

ERIC Educational Resources Information Center

Hutchings, Merryn; Francis, Becky; De Vries, Robert

2014-01-01

The authors analysed school performance data to review how well disadvantaged pupils achieve in academy chains. They included chains only if they had at least three academies in 2013, and two sponsored secondary academies for the whole period from September 2010 to July 2013. This means that academies are included in our analysis only when there…

Current Status and Bioinspired Perspective of Electrochemical Conversion of CO2 to a Long-Chain Hydrocarbon.

PubMed

Yang, Ki Dong; Lee, Chan Woo; Jin, Kyoungsuk; Im, Sang Won; Nam, Ki Tae

2017-01-19

Electrocatalytic conversion of CO 2 into a long-chain hydrocarbon represents an important research direction in adding value to CO 2 -based chemicals and realizing its practical application. Long-chain hydrocarbons may change the current fossil fuel-based industry in that those chemicals have a similar energy density as gasoline, high compatibility with the current infrastructure, and low hydroscopicity for pipeline distribution. However, most of the electrocatalysts produce C 1 , C 2 , and C 3 chemicals, and methods for producing long-chain hydrocarbons are not available thus far. Interestingly, nature utilizes many enzymes to generate long-chain hydrocarbons using C 2 building blocks and suggests key mechanisms, inspiring new perspective in the design of electrocatalysts. In this Perspective, we present case studies to demonstrate how CO 2 and its reductive derivatives interact with the electrode surface during C-C bond formation and introduce how these issues are addressed in biological systems. We end this Perspective by outlining possible strategies to translate the natural mechanism into a heterogeneous electrode.

Stimulating short-chain fatty acids production from waste activated sludge by nano zero-valent iron.

PubMed

Luo, Jingyang; Feng, Leiyu; Chen, Yinguang; Li, Xiang; Chen, Hong; Xiao, Naidong; Wang, Dongbo

2014-10-10

An efficient and green strategy, i.e. adding nano zero-valent iron into anaerobic fermentation systems to remarkably stimulate the accumulation of short-chain fatty acids from waste activated sludge via accelerating the solubilization and hydrolysis processes has been developed. In the presence of nano zero-valent iron, not only the short-chain fatty acids production was significantly improved, but also the fermentation time for maximal short-chain fatty acids was shortened compared with those in the absence of nano zero-valent iron. Mechanism investigations showed that the solubilization of sludge, hydrolysis of solubilized substances and acidification of hydrolyzed products were all enhanced by addition of nano zero-valent iron. Also, the general microbial activity of anaerobes and relative activities of key enzymes with hydrolysis and acidification of organic matters were improved than those in the control. 454 high-throughput pyrosequencing analysis suggested that the abundance of bacteria responsible for waste activated sludge hydrolysis and short-chain fatty acids production was greatly enhanced due to nano zero-valent iron addition. Copyright © 2014 Elsevier B.V. All rights reserved.

Determinants of supply chain coordination of milk and dairy industries in Ethiopia: a case of Addis Ababa and its surroundings.

PubMed

Lemma, Habtamu Regassa; Singh, Rajwinder; Kaur, Navjot

2015-01-01

Coordination of different business activities among units becomes vital as organizations pay much attention to their core activities. Thus, their fruitfulness constantly relies on their capacity to coordinate their internal and external activities in the supply chain outside their own boundaries. Giving consideration to these obvious reasons, this paper aims to investigate the determinants of supply chain coordination of milk and dairy industries. The data were collected from 330 milk suppliers, processors, and retailers in the central part of Ethiopia. The structural equation modeling has been employed to develop the structural relationship between key constructs and measured variables. In total, 15 measured variables for coordination in the supply chain have been identified. These are further grouped into four factors namely, non-price coordination, price coordination, relationships and product development decision. It has been observed that the implementation of these factors could maximize the coordination linkage among supply chain members. Thus, dairy sectors should take the identified coordination factors into account in each of their business dealings.

Poor nutrition on the menu: children's meals at America's top chain restaurants.

PubMed

Batada, Ameena; Bruening, Meg; Marchlewicz, Elizabeth H; Story, Mary; Wootan, Margo G

2012-06-01

We evaluated the nutritional quality of children's meals at chain restaurants, because children obtain about a third of their daily calories from away-from-home foods and studies show that restaurant foods are often higher in calories and lower in nutritional value than foods prepared at home. We assessed the nutritional quality of children's meals at the 50 largest U.S. restaurant chains by visiting each chain's web site or calling the company. Eighteen of the chains did not have children's meals and 10 did not provide adequate nutrition information to be included in the study. The nutritional quality of each meal combination was evaluated against a set of nutrition standards based on key nutrition recommendations in the Dietary Guidelines for Americans. Of the 22 restaurants that had children's menus and available nutrition information, 99% of 1662 children's meal combinations were of poor nutritional quality. Restaurants should support healthier choices for children by reformulating existing menu items and adding new healthier items, posting calories on menus, and setting nutrition standards for marketing to children.

Statistical Analysis of Notational AFL Data Using Continuous Time Markov Chains

PubMed Central

Meyer, Denny; Forbes, Don; Clarke, Stephen R.

2006-01-01

Animal biologists commonly use continuous time Markov chain models to describe patterns of animal behaviour. In this paper we consider the use of these models for describing AFL football. In particular we test the assumptions for continuous time Markov chain models (CTMCs), with time, distance and speed values associated with each transition. Using a simple event categorisation it is found that a semi-Markov chain model is appropriate for this data. This validates the use of Markov Chains for future studies in which the outcomes of AFL matches are simulated. Key Points A comparison of four AFL matches suggests similarity in terms of transition probabilities for events and the mean times, distances and speeds associated with each transition. The Markov assumption appears to be valid. However, the speed, time and distance distributions associated with each transition are not exponential suggesting that semi-Markov model can be used to model and simulate play. Team identified events and directions associated with transitions are required to develop the model into a tool for the prediction of match outcomes. PMID:24357946

Statistical Analysis of Notational AFL Data Using Continuous Time Markov Chains.

PubMed

Meyer, Denny; Forbes, Don; Clarke, Stephen R

2006-01-01

Animal biologists commonly use continuous time Markov chain models to describe patterns of animal behaviour. In this paper we consider the use of these models for describing AFL football. In particular we test the assumptions for continuous time Markov chain models (CTMCs), with time, distance and speed values associated with each transition. Using a simple event categorisation it is found that a semi-Markov chain model is appropriate for this data. This validates the use of Markov Chains for future studies in which the outcomes of AFL matches are simulated. Key PointsA comparison of four AFL matches suggests similarity in terms of transition probabilities for events and the mean times, distances and speeds associated with each transition.The Markov assumption appears to be valid.However, the speed, time and distance distributions associated with each transition are not exponential suggesting that semi-Markov model can be used to model and simulate play.Team identified events and directions associated with transitions are required to develop the model into a tool for the prediction of match outcomes.

Modeling traceability information and functionality requirement in export-oriented tilapia chain.

PubMed

Zhang, Xiaoshuan; Feng, Jianying; Xu, Mark; Hu, Jinyou

2011-05-01

Tilapia has been named as the 'food fish of the 21st century' and has become the most important farmed fish. China is the world leader in tilapia production and export. Identifying information and functional requirements is critical in developing an efficient traceability system because traceability has become a fundamental prerequisite for exporting aquaculture products. This paper examines the export-oriented tilapia chains and information flow in the chains, and identifies the key actors, information requirements and information-capturing points. Unified Modeling Language (UML) technology is adopted to describe the information and functionality requirement for chain traceability. The barriers of traceability system adoption are also identified. The results show that the traceability data consist of four categories that must be recorded by each link in the chain. The functionality requirement is classified into four categories from the fundamental information record to decisive quality control; the top three barriers to the traceability system adoption are: high costs of implementing the system, lack of experienced and professional staff; and low level of government involvement and support. Copyright © 2011 Society of Chemical Industry.

Variable camshaft timing system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butterfield, R.P.; Smith, F.R.

1989-09-05

This patent describes an improvement in a variable camshaft timing system for an internal combustion engine having intake and exhaust valves and a camshaft for each of the intake and exhaust valves, an intake sprocket and an exhaust sprocket keyed to their respective camshaft, only one of the camshafts being directly driven by an engine crankshaft, and a timing chain engaging both sprockets. The improvement comprising a single bracket carrying at least one idler sprocket engaging the timing chain, the bracket being mounted for movement to alter the timing relationship between the intake and exhaust sprockets.

Total Synthesis and Structure-Activity Investigation of the Marine Natural Product Neopeltolide

PubMed Central

Custar, Daniel W.; Zabawa, Thomas P.; Hines, John; Crews, Craig M.; Scheidt, Karl A.

2009-01-01

The total synthesis and biological evaluation of neopeltolide and analogs are reported. The key bond-forming step utilizes a Lewis acid-catalyzed intramolecular macrocyclization that installs the tetrahydropyran ring and macrocycle simultaneously. Independent of each other, neither the macrolide nor the oxazole side chain substituents of neopeltolide can inhibit the growth of cancer cell lines. The biological data of the analogs indicate that alterations to either the ester side chain or the stereochemistry of the macrolide result in a loss of biological activity. PMID:19663512

An Internet portal dedicated to pig production and wild suids in the tropics: PigTrop web site http://pigtrop.cirad.fr.

PubMed

Porphyre, Vincent; Gourment, Cyricce; Erwin, Thierry; Nouaille, Christine

2006-10-01

Considering that a wide access to updated and relevant data is a key point for livestock development and research improvement in tropics, The PigTrop web site (http://pigtrop.cirad.fr) is dedicated to pig production and pork commodity chains in developing countries. It mainly addresses stakeholders involved in the pig commodity chain, but also researchers, students, or development agencies with an interest in tropical pig breeding. It is run by the French Agricultural Research Centre for International Development (CIRAD).

Main-chain supramolecular block copolymers.

PubMed

Yang, Si Kyung; Ambade, Ashootosh V; Weck, Marcus

2011-01-01

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

Translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I

NASA Astrophysics Data System (ADS)

Takahashi, Masae; Ishikawa, Yoichi

2013-06-01

We perform dispersion-corrected first-principles calculations, and far-infrared (terahertz) spectroscopic experiments at 4 K, to examine translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I. The calculated frequencies and relative intensities reproduce the observed spectrum to accuracy of 11 cm-1 or less. The stronger one of the two peaks assigned to the translational mode includes the stretching vibration of the weak hydrogen bond between the acetyl groups of a neighboring one-dimensional chain. The calculation of aspirin form II performed for comparison gives the stretching vibration of the weak hydrogen bond in one-dimensional chain.

Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness

NASA Astrophysics Data System (ADS)

Tumac, Deniz

2014-03-01

Shore hardness has been used to estimate several physical and mechanical properties of rocks over the last few decades. However, the number of researches correlating Shore hardness with rock cutting performance is quite limited. Also, rather limited researches have been carried out on predicting the performance of chain saw machines. This study differs from the previous investigations in the way that Shore hardness values (SH1, SH2, and deformation coefficient) are used to determine the field performance of chain saw machines. The measured Shore hardness values are correlated with the physical and mechanical properties of natural stone samples, cutting parameters (normal force, cutting force, and specific energy) obtained from linear cutting tests in unrelieved cutting mode, and areal net cutting rate of chain saw machines. Two empirical models developed previously are improved for the prediction of the areal net cutting rate of chain saw machines. The first model is based on a revised chain saw penetration index, which uses SH1, machine weight, and useful arm cutting depth as predictors. The second model is based on the power consumed for only cutting the stone, arm thickness, and specific energy as a function of the deformation coefficient. While cutting force has a strong relationship with Shore hardness values, the normal force has a weak or moderate correlation. Uniaxial compressive strength, Cerchar abrasivity index, and density can also be predicted by Shore hardness values.

Lean production in improving supply chain performance through hybrid model SCOR 11.0 - system dynamics

NASA Astrophysics Data System (ADS)

Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi

2016-02-01

Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goebel, Carsten, E-mail: goebel.c.1@pg.com; Troutman, John; Hennen, Jenny

The strong sensitizing potencies of the most important primary intermediates of oxidative hair dyes, p-phenylenediamine (PPD) and p-toluylenediamine (PTD, i.e. 2-methyl-PPD) are well established. They are considered as the key sensitizers in hair dye allergic contact dermatitis. While modification of their molecular structure is expected to alter their sensitizing properties, it may also impair their color performance. With introduction of a methoxymethyl side chain we found the primary intermediate 2-methoxymethyl-p-phenylenediamine (ME-PPD) with excellent hair coloring performance but significantly reduced sensitizing properties compared to PPD and PTD: In vitro, ME-PPD showed an attenuated innate immune response when analyzed for its proteinmore » reactivity and dendritic cell activation potential. In vivo, the effective concentration of ME-PPD necessary to induce an immune response 3-fold above vehicle control (EC3 value) in the local lymph node assay (LLNA) was 4.3%, indicating a moderate skin sensitizing potency compared to values of 0.1 and 0.17% for PPD and PTD, respectively. Finally, assessing the skin sensitizing potency of ME-PPD under consumer hair dye usage conditions through a quantitative risk assessment (QRA) indicated an allergy induction risk negligible compared to PPD or PTD. - Highlights: • Methoxymethyl side chain in p-phenylenediamine reduces its strong skin sensitizing properties. • Reduced protein reactivity and dendritic cell activation. • Reduced skin sensitizing potency in local lymph node assay (LLNA). • Negligible allergy induction risk under hair dye usage conditions.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, Bruce Duncan

The objective of the report is to provide an assessment of the domestic supply chain and manufacturing infrastructure supporting the U.S. offshore wind market. The report provides baseline information and develops a strategy for future development of the supply chain required to support projected offshore wind deployment levels. A brief description of each of the key chapters includes: » Chapter 1: Offshore Wind Plant Costs and Anticipated Technology Advancements. Determines the cost breakdown of offshore wind plants and identifies technical trends and anticipated advancements in offshore wind manufacturing and construction. » Chapter 2: Potential Supply Chain Requirements and Opportunities. Providesmore » an organized, analytical approach to identifying and bounding the uncertainties associated with a future U.S. offshore wind market. It projects potential component-level supply chain needs under three demand scenarios and identifies key supply chain challenges and opportunities facing the future U.S. market as well as current suppliers of the nation’s land-based wind market. » Chapter 3: Strategy for Future Development. Evaluates the gap or competitive advantage of adding manufacturing capacity in the U.S. vs. overseas, and evaluates examples of policies that have been successful . » Chapter 4: Pathways for Market Entry. Identifies technical and business pathways for market entry by potential suppliers of large-scale offshore turbine components and technical services. The report is intended for use by the following industry stakeholder groups: (a) Industry participants who seek baseline cost and supplier information for key component segments and the overall U.S. offshore wind market (Chapters 1 and 2). The component-level requirements and opportunities presented in Section 2.3 will be particularly useful in identifying market sizes, competition, and risks for the various component segments. (b) Federal, state, and local policymakers and economic development agencies, to assist in identifying policies with low effort and high impact (Chapter 3). Section 3.3 provides specific policy examples that have been demonstrated to be effective in removing barriers to development. (c) Current and potential domestic suppliers in the offshore wind market, in evaluating areas of opportunity and understanding requirements for participation (Chapter 4). Section 4.4 provides a step-by-step description of the qualification process that suppliers looking to sell components into a future U.S. offshore wind market will need to follow.« less

The molecular mechanism of N-acetylglucosamine side-chain attachment to the Lancefield group A carbohydrate in Streptococcus pyogenes.

PubMed

Rush, Jeffrey S; Edgar, Rebecca J; Deng, Pan; Chen, Jing; Zhu, Haining; van Sorge, Nina M; Morris, Andrew J; Korotkov, Konstantin V; Korotkova, Natalia

2017-11-24

In many Lactobacillales species ( i.e. lactic acid bacteria), peptidoglycan is decorated by polyrhamnose polysaccharides that are critical for cell envelope integrity and cell shape and also represent key antigenic determinants. Despite the biological importance of these polysaccharides, their biosynthetic pathways have received limited attention. The important human pathogen, Streptococcus pyogenes , synthesizes a key antigenic surface polymer, the Lancefield group A carbohydrate (GAC). GAC is covalently attached to peptidoglycan and consists of a polyrhamnose polymer, with N -acetylglucosamine (GlcNAc) side chains, which is an essential virulence determinant. The molecular details of the mechanism of polyrhamnose modification with GlcNAc are currently unknown. In this report, using molecular genetics, analytical chemistry, and mass spectrometry analysis, we demonstrated that GAC biosynthesis requires two distinct undecaprenol-linked GlcNAc-lipid intermediates: GlcNAc-pyrophosphoryl-undecaprenol (GlcNAc-P-P-Und) produced by the GlcNAc-phosphate transferase GacO and GlcNAc-phosphate-undecaprenol (GlcNAc-P-Und) produced by the glycosyltransferase GacI. Further investigations revealed that the GAC polyrhamnose backbone is assembled on GlcNAc-P-P-Und. Our results also suggested that a GT-C glycosyltransferase, GacL, transfers GlcNAc from GlcNAc-P-Und to polyrhamnose. Moreover, GacJ, a small membrane-associated protein, formed a complex with GacI and significantly stimulated its catalytic activity. Of note, we observed that GacI homologs perform a similar function in Streptococcus agalactiae and Enterococcus faecalis In conclusion, the elucidation of GAC biosynthesis in S. pyogenes reported here enhances our understanding of how other Gram-positive bacteria produce essential components of their cell wall. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Blocking the interaction between HIV-1 integrase and human LEDGF/p75: mutational studies, virtual screening and molecular dynamics simulations.

PubMed

Reddy, Karnati Konda; Singh, Poonam; Singh, Sanjeev Kumar

2014-03-04

HIV-1 integrase (IN) mediates integration of viral cDNA into the host cell genome, an essential step in the retroviral life cycle. The human lens epithelium-derived growth factor (LEDGF/p75) is a co-factor of HIV-1 IN that plays a crucial role in viral integration. Because of its crucial role in early steps of HIV replication, the IN-LEDGF/p75 interaction represents an attractive target for anti-HIV drug discovery. In this study, the IN-LEDGF/p75 interaction was studied by in silico mutational studies and molecular dynamics simulations. The results showed that all of the key residues in the LEDGF/p75 binding pocket of IN protein are important for stabilization of the complex. Structure-based virtual screening against HIV-1 IN using the ChemBridge database was performed through three different protocols of docking simulations with varying precisions and computational intensities. Six compounds based on the docking score, binding affinity and pharmacokinetic parameters were selected and an analysis of the interactions with key amino acid residues of IN was carried out. Subsequently, molecular dynamics simulations of these compounds in the LEDGF/p75 binding site of IN were carried out in order to study the stability of complexes and their hydrogen bonding interactions. IN residues Glu170, His171, and Thr174 in chain A as well as Gln95 and Thr125 in chain B were discovered to play important roles in the binding of compounds. These findings could be helpful for blocking IN-LEDGF/p75 interaction, and provide a method for avoiding viral resistance and cross-resistance.

Leptin and leptin receptor gene polymorphisms are correlated with production performance in the Arctic fox.

PubMed

Zhang, M; Bai, X J

2015-05-25

The polymerase chain reaction-single-strand conformation polymorphism technique was employed to measure mononucleotide diversity in the coding region of the leptin and leptin receptor genes in the Arctic fox. The relationships between specific genetic mutations and reproductive performance in Arctic foxes were determined to im-prove breeding strategies. We found that a leptin gene polymorphism was significantly associated with body weight (P < 0.01), abdominal circumference (P < 0.01), and fur length (P < 0.01). Furthermore, a polymorphism in the leptin receptor gene was associated with carcass weight and guard hair length (P < 0.01). Leptin and leptin receptor gene combinatorial genotypes were significantly associated with abdominal circumference, fur length (P < 0.01), and body weight (P < 0.05). The leptin gene is thus a key gene affecting body weight, abdominal circumference, and fur length in Arctic foxes, whereas variations in the leptin receptor mainly affect carcass weight and guard hair. The marker loci identified in this study can be used to assist in the selection of Arctic foxes for breeding to raise the production performance of this species.

Understanding morphology-mobility dependence in PEDOT:Tos

NASA Astrophysics Data System (ADS)

Rolland, Nicolas; Franco-Gonzalez, Juan Felipe; Volpi, Riccardo; Linares, Mathieu; Zozoulenko, Igor V.

2018-04-01

The potential of conjugated polymers to compete with inorganic materials in the field of semiconductor is conditional on fine-tuning of the charge carriers mobility. The latter is closely related to the material morphology, and various studies have shown that the bottleneck for charge transport is the connectivity between well-ordered crystallites, with a high degree of π -π stacking, dispersed into a disordered matrix. However, at this time there is a lack of theoretical descriptions accounting for this link between morphology and mobility, hindering the development of systematic material designs. Here we propose a computational model to predict charge carriers mobility in conducting polymer PEDOT depending on the physicochemical properties of the system. We start by calculating the morphology using molecular dynamics simulations. Based on the calculated morphology we perform quantum mechanical calculation of the transfer integrals between states in polymer chains and calculate corresponding hopping rates using the Miller-Abrahams formalism. We then construct a transport resistive network, calculate the mobility using a mean-field approach, and analyze the calculated mobility in terms of transfer integrals distributions and percolation thresholds. Our results provide theoretical support for the recent study [Noriega et al., Nat. Mater. 12, 1038 (2013), 10.1038/nmat3722] explaining why the mobility in polymers rapidly increases as the chain length is increased and then saturates for sufficiently long chains. Our study also provides the answer to the long-standing question whether the enhancement of the crystallinity is the key to designing high-mobility polymers. We demonstrate, that it is the effective π -π stacking, not the long-range order that is essential for the material design for the enhanced electrical performance. This generic model can compare the mobility of a polymer thin film with different solvent contents, solvent additives, dopant species or polymer characteristics, providing a general framework to design new high mobility conjugated polymer materials.

Green certification, e-commerce, and low-carbon economy for international tourist hotels.

PubMed

Chen, Long-Fei

2018-05-22

Increasing population and over-consumption are placing unprecedented demands on agriculture and natural resources. The Earth is suffering from global warning and environmental destruction while our agricultural systems are concurrently degrading land, water, biodiversity, and climate on a global scale. For a sustainable future, green certification, e-commerce, and environment education can boost low-carbon economy with decreasing carbon emissions, but very few researches address them for the hotel industry. This research studies the performance impact of e-commerce, international hotel chain, local hotel chain, and green certification for carbon emission reductions of international tourist hotels of Taiwan. It reveals that, after a sufficiently long time, there is an improvement in the environmental and economic performance of the green-certified hotel group. In addition, it reveals that, as recommended by the operation policy, the international hotel chain group together with e-commerce has better performance than local hotel chain. It is also discussed how to sustain the continuing improvement in low-carbon performance of the hotel industry.

Port resilience: overcoming threats to maritime infrastructure and operations from climate change : final report.

DOT National Transportation Integrated Search

2015-12-01

In the coastal zone, seaports and their intermodal connectors are key types of infrastructure that support the global : supply chain, provide regional economic activity, local transportation system services, and community jobs. The : protection of co...

Oral Sustained Release of a Hydrophilic Drug Using the Lauryl Sulfate Salt/Complex.

PubMed

Kasashima, Yuuki; Yoshihara, Keiichi; Yasuji, Takehiko; Sako, Kazuhiro; Uchida, Shinya; Namiki, Noriyuki

2016-01-01

The objective of this study was to establish the key factor of the lauryl sulfate (LS) salt/complex for sustained release of a hydrophilic drug at various physiological pH levels. Mirabegron is a hydrophilic drug that exhibits pH-dependent solubility. Sodium lauryl sulfate (SLS) bound to mirabegron in a stoichiometric manner. The formation of the LS salt/complex significantly reduced mirabegron solubility and helped achieve sustained release of mirabegron over a wide range of pH levels. In addition to SLS, other additives containing a sulfate group formed salts/complexes with mirabegron and reduced its solubility at different pH levels. Furthermore, octyl sulfate (OS), myristyl sulfate (MS), and cetyl sulfate (CS) salts/complexes, which contain alkyl chains of different lengths, showed a lower solubility than mirabegron and promoted sustained release of mirabegron. The rank order of solubility and dissolution rate were as follows: OS salt/complex>LS salt/complex>MS salt/complex>CS salt/complex, which corresponded to the rank of alkyl chain lengths. We conclude that the presence of a sulfate group and the length of the alkyl chain are key factors of the LS salt/complex for sustained release of a hydrophilic drug at various physiological pH levels.

Vaccine instability in the cold chain: mechanisms, analysis and formulation strategies.

PubMed

Kumru, Ozan S; Joshi, Sangeeta B; Smith, Dawn E; Middaugh, C Russell; Prusik, Ted; Volkin, David B

2014-09-01

Instability of vaccines often emerges as a key challenge during clinical development (lab to clinic) as well as commercial distribution (factory to patient). To yield stable, efficacious vaccine dosage forms for human use, successful formulation strategies must address a combination of interrelated topics including stabilization of antigens, selection of appropriate adjuvants, and development of stability-indicating analytical methods. This review covers key concepts in understanding the causes and mechanisms of vaccine instability including (1) the complex and delicate nature of antigen structures (e.g., viruses, proteins, carbohydrates, protein-carbohydrate conjugates, etc.), (2) use of adjuvants to further enhance immune responses, (3) development of physicochemical and biological assays to assess vaccine integrity and potency, and (4) stabilization strategies to protect vaccine antigens and adjuvants (and their interactions) during storage. Despite these challenges, vaccines can usually be sufficiently stabilized for use as medicines through a combination of formulation approaches combined with maintenance of an efficient cold chain (manufacturing, distribution, storage and administration). Several illustrative case studies are described regarding mechanisms of vaccine instability along with formulation approaches for stabilization within the vaccine cold chain. These include live, attenuated (measles, polio) and inactivated (influenza, polio) viral vaccines as well as recombinant protein (hepatitis B) vaccines. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Simulation and Modeling Efforts to Support Decision Making in Healthcare Supply Chain Management

PubMed Central

Lazarova-Molnar, Sanja

2014-01-01

Recently, most healthcare organizations focus their attention on reducing the cost of their supply chain management (SCM) by improving the decision making pertaining processes' efficiencies. The availability of products through healthcare SCM is often a matter of life or death to the patient; therefore, trial and error approaches are not an option in this environment. Simulation and modeling (SM) has been presented as an alternative approach for supply chain managers in healthcare organizations to test solutions and to support decision making processes associated with various SCM problems. This paper presents and analyzes past SM efforts to support decision making in healthcare SCM and identifies the key challenges associated with healthcare SCM modeling. We also present and discuss emerging technologies to meet these challenges. PMID:24683333

First total syntheses of (Z)-15-methyl-10-hexadecenoic acid and the (Z)-13-methyl-8-tetradecenoic acid.

PubMed

Carballeira, Néstor M; Montano, Nashbly; Padilla, Luis F

2007-01-01

The first total syntheses for the (Z)-15-methyl-10-hexadecenoic acid and the (Z)-13-methyl-8-tetradecenoic acid were accomplished in seven steps and in 31-32% overall yields. The (trimethylsilyl)acetylene was the key reagent in both syntheses. It is proposed that the best synthetic strategy towards monounsaturated iso methyl-branched fatty acids with double bonds close to the omega end of the acyl chain is first acetylide coupling of (trimethylsilyl)acetylene to a long-chain bifunctional bromoalkane followed by a second acetylide coupling to a short-chain iso bromoalkane, since higher yields are thus obtained. Spectral data is also presented for the first time for these two unusual fatty acids with potential as biomarkers and as topoisomerase I inhibitors.

Progress in combating cigarette smuggling: controlling the supply chain.

PubMed

Joossens, L; Raw, M

2008-12-01

The illicit tobacco trade results in huge losses of revenue to governments, estimated at $US40-50 billion in 2006, and in increased consumption and thus health problems because it makes tobacco available more cheaply. On 20 October 2008 the second meeting of the International Negotiating Body (INB2) on the illicit trade protocol of WHO's Framework Convention on Tobacco Control (FCTC) will discuss measures to tackle the illicit trade in tobacco products. This paper presents the experience over the last decade of three countries, Italy, Spain and the United Kingdom, which shows that tobacco smuggling can be successfully tackled. The evidence strongly suggests that the key to controlling smuggling is controlling the supply chain, and that the supply chain is controlled to a great extent by the tobacco industry.

Comparison of two optimized readout chains for low light CIS

NASA Astrophysics Data System (ADS)

Boukhayma, A.; Peizerat, A.; Dupret, A.; Enz, C.

2014-03-01

We compare the noise performance of two optimized readout chains that are based on 4T pixels and featuring the same bandwidth of 265kHz (enough to read 1Megapixel with 50frame/s). Both chains contain a 4T pixel, a column amplifier and a single slope analog-to-digital converter operating a CDS. In one case, the pixel operates in source follower configuration, and in common source configuration in the other case. Based on analytical noise calculation of both readout chains, an optimization methodology is presented. Analytical results are confirmed by transient simulations using 130nm process. A total input referred noise bellow 0.4 electrons RMS is reached for a simulated conversion gain of 160μV/e-. Both optimized readout chains show the same input referred 1/f noise. The common source based readout chain shows better performance for thermal noise and requires smaller silicon area. We discuss the possible drawbacks of the common source configuration and provide the reader with a comparative table between the two readout chains. The table contains several variants (column amplifier gain, in-pixel transistor sizes and type).

3D-MICE: integration of cross-sectional and longitudinal imputation for multi-analyte longitudinal clinical data.

PubMed

Luo, Yuan; Szolovits, Peter; Dighe, Anand S; Baron, Jason M

2018-06-01

A key challenge in clinical data mining is that most clinical datasets contain missing data. Since many commonly used machine learning algorithms require complete datasets (no missing data), clinical analytic approaches often entail an imputation procedure to "fill in" missing data. However, although most clinical datasets contain a temporal component, most commonly used imputation methods do not adequately accommodate longitudinal time-based data. We sought to develop a new imputation algorithm, 3-dimensional multiple imputation with chained equations (3D-MICE), that can perform accurate imputation of missing clinical time series data. We extracted clinical laboratory test results for 13 commonly measured analytes (clinical laboratory tests). We imputed missing test results for the 13 analytes using 3 imputation methods: multiple imputation with chained equations (MICE), Gaussian process (GP), and 3D-MICE. 3D-MICE utilizes both MICE and GP imputation to integrate cross-sectional and longitudinal information. To evaluate imputation method performance, we randomly masked selected test results and imputed these masked results alongside results missing from our original data. We compared predicted results to measured results for masked data points. 3D-MICE performed significantly better than MICE and GP-based imputation in a composite of all 13 analytes, predicting missing results with a normalized root-mean-square error of 0.342, compared to 0.373 for MICE alone and 0.358 for GP alone. 3D-MICE offers a novel and practical approach to imputing clinical laboratory time series data. 3D-MICE may provide an additional tool for use as a foundation in clinical predictive analytics and intelligent clinical decision support.

Contraception supply chain challenges: a review of evidence from low- and middle-income countries.

PubMed

Mukasa, Bakali; Ali, Moazzam; Farron, Madeline; Van de Weerdt, Renee

2017-10-01

To identify and assess factors determining the functioning of supply chain systems for modern contraception in low- and middle-income countries (LMICs), and to identify challenges contributing to contraception stockouts that may lead to unmet need. Scientific databases and grey literature were searched including Database of Abstracts of Reviews of Effectiveness (DARE), PubMed, MEDLINE, POPLINE, CINAHL, Academic Search Complete, Science Direct, Web of Science, Cochrane Central, Google Scholar, WHO databases and websites of key international organisations. Studies indicated that supply chain system inefficiencies significantly affect availability of modern FP and contraception commodities in LMICs, especially in rural public facilities where distribution barriers may be acute. Supply chain failures or bottlenecks may be attributed to: weak and poorly institutionalized logistic management information systems (LMIS), poor physical infrastructures in LMICs, lack of trained and dedicated staff for supply chain management, inadequate funding, and rigid government policies on task sharing. However, there is evidence that implementing effective LMISs and involving public and private providers will distribution channels resulted in reduction in medical commodities' stockout rates. Supply chain bottlenecks contribute significantly to persistent high stockout rates for modern contraceptives in LMICs. Interventions aimed at enhancing uptake of contraceptives to reduce the problem of unmet need in LMICs should make strong commitments towards strengthening these countries' health commodities supply chain management systems. Current evidence is limited and additional, and well-designed implementation research on contraception supply chain systems is warranted to gain further understanding and insights on the determinants of supply chain bottlenecks and their impact on stockouts of contraception commodities.

The C-terminus of the B-chain of human insulin-like peptide 5 is critical for cognate RXFP4 receptor activity.

PubMed

Patil, Nitin A; Bathgate, Ross A D; Kocan, Martina; Ang, Sheng Yu; Tailhades, Julien; Separovic, Frances; Summers, Roger; Grosse, Johannes; Hughes, Richard A; Wade, John D; Hossain, Mohammed Akhter

2016-04-01

Insulin-like peptide 5 (INSL5) is an orexigenic peptide hormone belonging to the relaxin family of peptides. It is expressed primarily in the L-cells of the colon and has a postulated key role in regulating food intake. Its G protein-coupled receptor, RXFP4, is a potential drug target for treating obesity and anorexia. We studied the effect of modification of the C-terminus of the A and B-chains of human INSL5 on RXFP4 binding and activation. Three variants of human INSL5 were prepared using solid phase peptide synthesis and subsequent sequential regioselective disulfide bond formation. The peptides were synthesized as C-terminal acids (both A- and B-chains with free C-termini, i.e., the native form), amides (both chains as the C-terminal amide) and one analog with the C-terminus of its A-chain as the amide and the C-terminus of the B-chain as the acid. The results showed that C-terminus of the B-chain is more important than that of the A-chain for RXFP4 binding and activity. Amidation of the A-chain C-terminus does not have any effect on the INSL5 activity. The difference in RXFP4 binding and activation between the three peptides is believed to be due to electrostatic interaction of the free carboxylate of INSL5 with a positively charged residue (s), either situated within the INSL5 molecule itself or in the receptor extracellular loops.

Binding of cationic pentapeptides with modified side chain lengths to negatively charged lipid membranes: Complex interplay of electrostatic and hydrophobic interactions.

PubMed

Hoernke, Maria; Schwieger, Christian; Kerth, Andreas; Blume, Alfred

2012-07-01

Basic amino acids play a key role in the binding of membrane associated proteins to negatively charged membranes. However, side chains of basic amino acids like lysine do not only provide a positive charge, but also a flexible hydrocarbon spacer that enables hydrophobic interactions. We studied the influence of hydrophobic contributions to the binding by varying the side chain length of pentapeptides with ammonium groups starting with lysine to lysine analogs with shorter side chains, namely omithine (Orn), alpha, gamma-diaminobutyric acid (Dab) and alpha, beta-diaminopropionic acid (Dap). The binding to negatively charged phosphatidylglycerol (PG) membranes was investigated by calorimetry, FT-infrared spectroscopy (FT-IR) and monolayer techniques. The binding was influenced by counteracting and sometimes compensating contributions. The influence of the bound peptides on the lipid phase behavior depends on the length of the peptide side chains. Isothermal titration calorimetry (ITC) experiments showed exothermic and endothermic effects compensating to a different extent as a function of side chain length. The increase in lipid phase transition temperature was more significant for peptides with shorter side chains. FTIR-spectroscopy revealed changes in hydration of the lipid bilayer interface after peptide binding. Using monolayer techniques, the contributions of electrostatic and hydrophobic effects could clearly be observed. Peptides with short side chains induced a pronounced decrease in surface pressure of PG monolayers whereas peptides with additional hydrophobic interactions decreased the surface pressure much less or even lead to an increase, indicating insertion of the hydrophobic part of the side chain into the lipid monolayer.

Structure of Cellulose Microfibrils in Primary Cell Walls from Collenchyma1[C][W][OA

PubMed Central

Thomas, Lynne H.; Forsyth, V. Trevor; Šturcová, Adriana; Kennedy, Craig J.; May, Roland P.; Altaner, Clemens M.; Apperley, David C.; Wess, Timothy J.; Jarvis, Michael C.

2013-01-01

In the primary walls of growing plant cells, the glucose polymer cellulose is assembled into long microfibrils a few nanometers in diameter. The rigidity and orientation of these microfibrils control cell expansion; therefore, cellulose synthesis is a key factor in the growth and morphogenesis of plants. Celery (Apium graveolens) collenchyma is a useful model system for the study of primary wall microfibril structure because its microfibrils are oriented with unusual uniformity, facilitating spectroscopic and diffraction experiments. Using a combination of x-ray and neutron scattering methods with vibrational and nuclear magnetic resonance spectroscopy, we show that celery collenchyma microfibrils were 2.9 to 3.0 nm in mean diameter, with a most probable structure containing 24 chains in cross section, arranged in eight hydrogen-bonded sheets of three chains, with extensive disorder in lateral packing, conformation, and hydrogen bonding. A similar 18-chain structure, and 24-chain structures of different shape, fitted the data less well. Conformational disorder was largely restricted to the surface chains, but disorder in chain packing was not. That is, in position and orientation, the surface chains conformed to the disordered lattice constituting the core of each microfibril. There was evidence that adjacent microfibrils were noncovalently aggregated together over part of their length, suggesting that the need to disrupt these aggregates might be a constraining factor in growth and in the hydrolysis of cellulose for biofuel production. PMID:23175754

Structure of cellulose microfibrils in primary cell walls from collenchyma.

PubMed

Thomas, Lynne H; Forsyth, V Trevor; Sturcová, Adriana; Kennedy, Craig J; May, Roland P; Altaner, Clemens M; Apperley, David C; Wess, Timothy J; Jarvis, Michael C

2013-01-01

In the primary walls of growing plant cells, the glucose polymer cellulose is assembled into long microfibrils a few nanometers in diameter. The rigidity and orientation of these microfibrils control cell expansion; therefore, cellulose synthesis is a key factor in the growth and morphogenesis of plants. Celery (Apium graveolens) collenchyma is a useful model system for the study of primary wall microfibril structure because its microfibrils are oriented with unusual uniformity, facilitating spectroscopic and diffraction experiments. Using a combination of x-ray and neutron scattering methods with vibrational and nuclear magnetic resonance spectroscopy, we show that celery collenchyma microfibrils were 2.9 to 3.0 nm in mean diameter, with a most probable structure containing 24 chains in cross section, arranged in eight hydrogen-bonded sheets of three chains, with extensive disorder in lateral packing, conformation, and hydrogen bonding. A similar 18-chain structure, and 24-chain structures of different shape, fitted the data less well. Conformational disorder was largely restricted to the surface chains, but disorder in chain packing was not. That is, in position and orientation, the surface chains conformed to the disordered lattice constituting the core of each microfibril. There was evidence that adjacent microfibrils were noncovalently aggregated together over part of their length, suggesting that the need to disrupt these aggregates might be a constraining factor in growth and in the hydrolysis of cellulose for biofuel production.

Engineering acyl carrier protein to enhance production of shortened fatty acids.

PubMed

Liu, Xueliang; Hicks, Wade M; Silver, Pamela A; Way, Jeffrey C

2016-01-01

The acyl carrier protein (ACP) is an essential and ubiquitous component of microbial synthesis of fatty acids, the natural precursor to biofuels. Natural fatty acids usually contain long chains of 16 or more carbon atoms. Shorter carbon chains, with increased fuel volatility, are desired for internal combustion engines. Engineering the length specificity of key proteins in fatty acid metabolism, such as ACP, may enable microbial synthesis of these shorter chain fatty acids. We constructed a homology model of the Synechococcus elongatus ACP, showing a hydrophobic pocket harboring the growing acyl chain. Amino acids within the pocket were mutated to increase steric hindrance to the acyl chain. Certain mutant ACPs, when over-expressed in Escherichia coli, increased the proportion of shorter chain lipids; I75 W and I75Y showed the strongest effects. Expression of I75 W and I75Y mutant ACPs also increased production of lauric acid in E. coli that expressed the C12-specific acyl-ACP thioesterase from Cuphea palustris. We engineered the specificity of the ACP, an essential protein of fatty acid metabolism, to alter the E. coli lipid pool and enhance production of medium-chain fatty acids as biofuel precursors. These results indicate that modification of ACP itself could be combined with enzymes affecting length specificity in fatty acid synthesis to enhance production of commodity chemicals based on fatty acids.

Investigation of chemical and electrochemical reactions mechanisms in a direct carbon fuel cell using olive wood charcoal as sustainable fuel

NASA Astrophysics Data System (ADS)

Elleuch, Amal; Halouani, Kamel; Li, Yongdan

2015-05-01

Direct carbon fuel cell (DCFC) is a high temperature fuel cell using solid carbon as fuel. The use of environmentally friendly carbon material constitutes a promising option for the DCFC future. In this context, this paper focuses on the use of biomass-derived charcoal renewable fuel. A practical investigation of Tunisian olive wood charcoal (OW-C) in planar DCFCs is conducted and good power density (105 mW cm-2) and higher current density (550 mA cm-2) are obtained at 700 °C. Analytical and predictive techniques are performed to explore the relationships between fuel properties and DCFC chemical and electrochemical mechanisms. High carbon content, carbon-oxygen groups and disordered structure, are the key parameters allowing the achieved good performance. Relatively complex chain reactions are predicted to explain the gas evolution within the anode. CO, H2 and CH4 participation in the anodic reaction is proved.

Semiconducting polymers with nanocrystallites interconnected via boron-doped carbon nanotubes.

PubMed

Yu, Kilho; Lee, Ju Min; Kim, Junghwan; Kim, Geunjin; Kang, Hongkyu; Park, Byoungwook; Ho Kahng, Yung; Kwon, Sooncheol; Lee, Sangchul; Lee, Byoung Hun; Kim, Jehan; Park, Hyung Il; Kim, Sang Ouk; Lee, Kwanghee

2014-12-10

Organic semiconductors are key building blocks for future electronic devices that require unprecedented properties of low-weight, flexibility, and portability. However, the low charge-carrier mobility and undesirable processing conditions limit their compatibility with low-cost, flexible, and printable electronics. Here, we present significantly enhanced field-effect mobility (μ(FET)) in semiconducting polymers mixed with boron-doped carbon nanotubes (B-CNTs). In contrast to undoped CNTs, which tend to form undesired aggregates, the B-CNTs exhibit an excellent dispersion in conjugated polymer matrices and improve the charge transport between polymer chains. Consequently, the B-CNT-mixed semiconducting polymers enable the fabrication of high-performance FETs on plastic substrates via a solution process; the μFET of the resulting FETs reaches 7.2 cm(2) V(-1) s(-1), which is the highest value reported for a flexible FET based on a semiconducting polymer. Our approach is applicable to various semiconducting polymers without any additional undesirable processing treatments, indicating its versatility, universality, and potential for high-performance printable electronics.

Understanding and reducing the risk of supply chain disruptions.

PubMed

Clark, Graham

2012-01-01

Natural disasters can wreck havoc on business operations. When civil unrest swept the UK in August 2011, the effect on business was stark, losing the retail sector £300m in unexpected costs and lost revenues. On the other side of the world, the natural disaster that hit Japan in early 2011 is estimated to have run up costs in the region of £189bn in repairs. Beyond this, the earthquake and its aftermath shattered supply chains, with technology companies expecting delays of up to six months before business could resume fully. It is impossible to predict incidents like these, but businesses can help mitigate disruption in the supply chain by undertaking business continuity management (BCM). A flexible supply chain is essential when it comes to BCM - whether it means being able to cope with altering transport routes at short notice, or finding or replacing a supplier at the last minute. Understanding the supply chain is critical when responding to major impacts that affect supply chains in multiple points - like IT system failures and country-wide fuel strikes. Businesses should carry out detailed business impact assessments and risk assessments right across the end-to-end supply chain and not just at key single points of failure. It is an intensive process that needs dedicated resources and ownership at the highest level. Recognising this, DHL has designed a 10-step process, which it has implemented across its global supply chain business. This paper provides an overview of what a supply chain really looks like, what can cause disruptions and how far up/down the supply chain companies need to go with their BCM planning.

Using integrated information systems in supply chain management

NASA Astrophysics Data System (ADS)

Gonzálvez-Gallego, Nicolás; Molina-Castillo, Francisco-Jose; Soto-Acosta, Pedro; Varajao, Joao; Trigo, Antonio

2015-02-01

The aim of this paper is to empirically test not only the direct effects of information and communication technology (ICT) capabilities and integrated information systems (IS) on firm performance, but also the moderating role of IS integration along the supply chain in the relationship between ICT external and capabilities and business performance. Data collected from 102 large Iberian firms from Spain and Portugal are used to test the research model. The hierarchical multiple regression analysis is employed to test the direct effects and the moderating relationships proposed. Results show that external and internal ICT capabilities are important drivers of firm performance, while merely having integrated IS do not lead to better firm performance. In addition, a moderating effect of IS integration in the relationship between ICT capabilities and business performance is found, although this integration only contributes to firm performance when it is directed to connect with suppliers or customers rather than when integrating the whole supply chain.

Design of Donor Polymers with Strong Temperature-Dependent Aggregation Property for Efficient Organic Photovoltaics.

PubMed

Hu, Huawei; Chow, Philip C Y; Zhang, Guangye; Ma, Tingxuan; Liu, Jing; Yang, Guofang; Yan, He

2017-10-17

Bulk heterojunction (BHJ) organic solar cells (OSCs) have attracted intensive research attention over the past two decades owing to their unique advantages including mechanical flexibility, light weight, large area, and low-cost fabrications. To date, OSC devices have achieved power conversion efficiencies (PCEs) exceeding 12%. Much of the progress was enabled by the development of high-performance donor polymers with favorable morphological, electronic, and optical properties. A key problem in morphology control of OSCs is the trade-off between achieving small domain size and high polymer crystallinity, which is especially important for the realization of efficient thick-film devices with high fill factors. For example, the thickness of OSC blends containing state-of-the-art PTB7 family donor polymers are restricted to ∼100 nm due to their relatively low hole mobility and impure polymer domains. To further improve the device performance and promote commercialization of OSCs, there is a strong demand for the design of new donor polymers that can achieve an optimal blend morphology containing highly crystalline yet reasonably small domains. In this Account, we highlight recent progress on a new family of conjugated polymers with strong temperature-dependent aggregation (TDA) property. These polymers are mostly disaggregated and can be easily dissolved in solution at high temperatures, yet they can strongly aggregate when the solution is cooled to room temperature. This unique aggregation property allows us to control the disorder-order transition of the polymer during solution processing. By preheating the solution to high temperature (∼100 °C), the polymer chains are mostly disaggregated before spin coating; as the temperature of the solution drops during the spin coating process, the polymer can strongly aggregate and form crystalline domains yet that are not excessivelylarge. The overall blend morphology can be optimized by various processing conditions (e.g., temperature, spin-rates, concentration, etc.). This well-controlled and near-optimal BHJ morphology produced over a dozen cases of efficient OSCs with an active layer nearly 300 nm thick that can still achieve high FFs (70-77%) and efficiencies (10-11.7%). By studying the structure-property relationships of the donor polymers, we show that the second position branched alkyl chains and the fluorination on the polymer backbone are two key structural features that enable the strong TDA property. Our comparative studies also show that the TDA polymer family can be used to match with non-fullerene acceptors yielding OSCs with low voltage losses. The key difference between the empirical matching rules for fullerene and non-fullerene OSCs is that TDA polymers with slightly reduced crystallinity appear to match better with small molecular acceptors and yield higher OSC performances.

Trunk involvement in performing upper extremity activities while seated in neurological patients with a flaccid trunk - A review.

PubMed

Peeters, Laura H C; de Groot, Imelda J M; Geurts, Alexander C H

2018-05-01

Trunk control is essential during seated activities. The trunk interacts with the upper extremities (UE) and head by being part of a kinematic chain and by providing a stable basis. When trunk control becomes impaired, it may have consequences for the execution of UE tasks. To review trunk involvement in body movement and stability when performing seated activities and its relation with UE and head movements in neurological patients with a flaccid trunk, with a focus on childhood and development with age. A search using PubMed was conducted and 32 out of 188 potentially eligible articles were included. Patients with a flaccid trunk (e.g. with spinal cord injury or cerebral palsy) tend to involve the trunk earlier while reaching than healthy persons. Different balance strategies are observed in different types of patients, like using the contralateral arm as counterweight, eliminating degrees of freedom, or reducing movement speed. The key role of the trunk in performing activities should be kept in mind when developing interventions to improve seated task performance in neurological patients with a flaccid trunk. Copyright © 2018 Elsevier B.V. All rights reserved.

Study on supply chain management in tourism e-commerce

NASA Astrophysics Data System (ADS)

Hu, Yaodong; Wu, Shuyan; Ma, Haiyan

2009-07-01

On-line customer research has been conducted for European and American markets by marketers and academics. Whilst e-Commerce and tourism develop rapidly in China, and the fraud information in E-commerce market makes the conditions of information asymmetry becoming more seriously, understanding of Chinese internet travelers is required. This paper reviews current research on supply chain management (SCM) within the context of tourism. SCM in the manufacturing industry has attracted widespread research interest over the past two decades, whereas studies of SCM in the tourism e-commerce are very limited. The potential benefit of considering not only individual enterprises but also the tourism value chain becomes evident. This paper presents the model e-market structure and process analysis of tourism e-commerce, and also sets up tourism supply chain and tourism e-commerce system to probe how to apply tourism ecommerce to promote the sustainable development of tourism. The paper also identifies key research questions in TSCM worthy of future theoretical and empirical exploration.

Solution-Phase Conformation and Dynamics of Conjugated Isoindigo-Based Donor–Acceptor Polymer Single Chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Franklin L.; Farimani, Amir Barati; Gu, Kevin L.

Conjugated polymers are the key material in thin-film organic optoelectronic devices due to the versatility of these molecules combined with their semiconducting properties. A molecular-scale understanding of conjugated polymers is important to the optimization of the thin-film morphology. We examine the solution-phase behavior of conjugated isoindigo-based donor–acceptor polymer single chains of various chain lengths using atomistic molecular dynamics simulations. Our simulations elucidate the transition from a rod-like to a coil-like conformation from an analysis of normal modes and persistence length. In addition, we find another transition based on the solvent environment, contrasting the coil-like conformation in a good solvent withmore » a globule-like conformation in a poor solvent. Altogether, our results provide valuable insights into the transition between conformational regimes for conjugated polymers as a function of both the chain length and the solvent environment, which will help to accurately parametrize higher level models.« less

Solution-Phase Conformation and Dynamics of Conjugated Isoindigo-Based Donor–Acceptor Polymer Single Chains

DOE PAGES

Lee, Franklin L.; Farimani, Amir Barati; Gu, Kevin L.; ...

2017-10-25

Conjugated polymers are the key material in thin-film organic optoelectronic devices due to the versatility of these molecules combined with their semiconducting properties. A molecular-scale understanding of conjugated polymers is important to the optimization of the thin-film morphology. We examine the solution-phase behavior of conjugated isoindigo-based donor–acceptor polymer single chains of various chain lengths using atomistic molecular dynamics simulations. Our simulations elucidate the transition from a rod-like to a coil-like conformation from an analysis of normal modes and persistence length. In addition, we find another transition based on the solvent environment, contrasting the coil-like conformation in a good solvent withmore » a globule-like conformation in a poor solvent. Altogether, our results provide valuable insights into the transition between conformational regimes for conjugated polymers as a function of both the chain length and the solvent environment, which will help to accurately parametrize higher level models.« less

Waveguide transport mediated by strong coupling with atoms

NASA Astrophysics Data System (ADS)

Cheng, Mu-Tian; Xu, Jingping; Agarwal, Girish S.

2017-05-01

We investigate single-photon scattering properties in a one-dimensional waveguide coupled to a quantum emitter's chain with dipole-dipole interaction (DDI). The photon transport is extremely sensitive to the location of the evanescently coupled atoms. The analytical expressions of reflection and transmission amplitudes for the chain containing two emitters with DDI are deduced by using a real-space Hamiltonian. Two cases, where the two emitters symmetrically or asymmetrically couple to the waveguide, are discussed in detail. It shows that the reflection and transmission typical spectra split into two peaks due to the DDI. The Fano minimum in the spectra can be used to estimate the strength of the DDI. Furthermore, the DDI makes spectra strongly asymmetric and creates a transmission window in the region where there was zero transmission. The scattering spectra for the chain consisting of multiple emitters are also given. Our key finding is that DDI can broaden the frequency bandwidth for high reflection when the chain consists of many emitters.

Molecular weight kinetics and chain scission models for dextran polymers during ultrasonic degradation.

PubMed

Pu, Yuanyuan; Zou, Qingsong; Hou, Dianzhi; Zhang, Yiping; Chen, Shan

2017-01-20

Ultrasonic degradation of six dextran samples with different initial molecular weights (IMW) has been performed to investigate the degradation behavior and chain scission mechanism of dextrans. The weight-average molecular weight (Mw) and polydispersity index (D value) were monitored by High Performance Gel Permeation Chromatography (HPGPC). Results showed that Mw and D value decreased with increasing ultrasonic time, resulting in a more homologous dextran solution with lower molecular weight. A significant degradation occurred in dextrans with higher IMW, particularly at the initial stage of the ultrasonic treatment. The Malhotra model was found to well describe the molecular weight kinetics for all dextran samples. Experimental data was fitted into two chain scission models to study dextran chain scission mechanism and the model performance was compared. Results indicated that the midpoint scission model agreed well with experimental results, with a linear regression factor of R 2 >0.99. Copyright © 2016 Elsevier Ltd. All rights reserved.

Critical Casimir effect in a polymer chain in supercritical solvents.

PubMed

Sumi, Tomonari; Imazaki, Nobuyuki; Sekino, Hideo

2009-03-01

Density fluctuation effects on the conformation of a polymer chain in a supercritical solvent were investigated by performing a multiscale simulation based on the density-functional theory. We found (a) a universal swelling of the polymer chain near the critical point, irrespective of whether the polymer chain is solvophilic or solvophobic, and (b) a characteristic collapse of the polymer chain having a strong solvophilicity at a temperature slightly higher than the critical point, where the isothermal compressibility becomes less than the ideal one.

Diffusing Supply Chain Innovations at Hewlett-Packard Company: Applications of Performance Technology.

ERIC Educational Resources Information Center

Cargille, Brian; Branvold, Dwight

2000-01-01

Explains how Hewlett-Packard creates supply chain management innovations and effectively diffuses new technologies. Outlines how performance technologists help accelerate the diffusion and adoption of innovations by modifying innovations, define the client adoption path, create resources to lead clients through adoption, and improve the diffusion…

Effects of enterprise technology on supply chain collaboration: analysis of China-linked supply chain

NASA Astrophysics Data System (ADS)

Li, Ling

2012-02-01

Supply chain collaboration has received increasing attention from scholars and practitioners in recent years. However, our understanding of how enterprise information technology facilitates supply chain collaboration is still very limited, especially with regard to Chinese enterprise ownerships such as state-owned firms, joint-venture firms and local village-owned firms. This paper extends the theory established in enterprise information technology (IT) and supply chain collaboration literature and relates it with coordination in China-linked supply chain. Drawing upon an empirical study from 177 Chinese companies, we provide three major findings: (i) uncovered the importance of leveraging enterprise IT through supply chain collaboration; (ii) identified the relationship between enterprise ownership and enterprise technology use and supply chain collaboration in China-linked supply chain and (iii) illustrated effects of supply chain collaborative activities on operational and market performance.

Tyrosine Templating in the Self-Assembly and Crystallization of Silk Fibroin.

PubMed

Partlow, Benjamin P; Bagheri, Mehran; Harden, James L; Kaplan, David L

2016-11-14

Native silk fibers exhibit strength and toughness that rival those of the best synthetic fibers. Despite significant research, further insight is still needed to understand the mechanisms by which silkworms are capable of spinning such tough fibers. Here we propose that π-π and π-OH group interactions of tyrosine side chains provide templating effects, such that the crystal-forming domains are in registration, thereby fostering the self-assembly of the spinning dope. Intrinsic fluorescence measurements, in conjunction with circular dichroism, showed that during self-assembly of regenerated silk solutions, the tyrosine residues were localized in a more hydrophobic local environment, suggesting preferential assembly. In situ Fourier transform infrared spectroscopy indicated that cross-linking of the tyrosine residues resulted in the development of extended β-sheet structure. Additionally, control of cross-link density directly influenced the degree of crystallinity upon drying. Molecular dynamics simulations were performed on silk mimetic peptides in order to more thoroughly understand the role of tyrosines. The results indicated that tyrosine residues tended to transiently colocate in solution due to π-π interactions and hydrogen bonds with adjacent residues and with the peptide backbone. These more stable tyrosine interactions resulted in reduced lateral chain fluctuations and increased incidence of coordinated intrachain association, while introduction of a dityrosine bond directly promoted the formation of β-sheet structures. In total, the experimental and modeling data support a critical role for tyrosine-tyrosine interactions as a key early feature in the self-assembly of regenerated silk protein chains and therefore are important in the robust and unusual mechanical properties ultimately achieved in the process.

Sustained high-throughput polymerase chain reaction diagnostics during the European epidemic of Bluetongue virus serotype 8.

PubMed

van Rijn, Piet A; Heutink, René G; Boonstra, Jan; Kramps, Hans A; van Gennip, René G P

2012-05-01

A real-time reverse transcription polymerase chain reaction assay (PCR test) based on genome segment 10 of Bluetongue virus (BTV) was developed. The PCR test consists of robotized viral RNA isolation from blood samples and an all-in-one method including initial denaturation of genomic double-stranded RNA, reverse transcription polymerase chain reaction (RT-PCR), and real-time detection and analysis. Reference strains of the 24 recognized BTV serotypes, isolates from different years, and geographic origins were detected. Other orbiviruses such as African horse sickness virus, Epizootic hemorrhagic disease virus, and Equine encephalosis virus were not detected. Experimentally infected animals were PCR positive from 2 days postinoculation, which was earlier than fever, other clinical signs, or seroconversion. The diagnostic sensitivity and specificity were very close to or even 100%. The PCR test played a key role in the detection of BTV serotype 8 in August 2006 in The Netherlands. The outbreak in a completely naive ruminant population allowed for further evaluation of the PCR test with field samples. In 2006, the correlation between enzyme-linked immunosorbent assay and PCR results was estimated to be 95%. In the following years, the PCR test was used for diagnosis of diseased animals, for testing of healthy animals for trade purposes, and for detection of BTV RNA in different species of the insect vector, Culicoides. In the autumn of 2008, BTV serotype 6 unexpectedly emerged in northwest Europe and was also detected with the PCR test developed in the current study. The performance in routine use over 5 years has been recorded and evaluated.

Structural basis of oligosaccharide processing by glycosaminoglycan sulfotransferases.

PubMed

Gesteira, Tarsis F; Coulson-Thomas, Vivien J

2018-06-06

Heparan sulfate (HS) is a sulfated polysaccharide that plays a key role in morphogenesis, physiology and pathogenesis. The biosynthesis of HS takes place in the Golgi apparatus by a group of enzymes that polymerize, epimerize and sulfate the sugar chain. This biosynthetic process introduces varying degrees of sulfate substitution, which are tightly regulated and directly dictate binding specificity to different cytokines, morphogens and growth factors. Here we report the use of molecular dynamics simulations to investigate the dynamics of substrate recognition of two glycosaminoglycan (GAG) sulfotransferases, N-deacetylase-N-sulfotransferase and 2-O-sulfotransferase to the HS chain during the biosynthetic process. We performed multiple simulations of the binding of the sulfotransferase domains to both the HS oligosaccharide substrate and sulfate donor, 3'-phosphoadenosine-5'-phosphosulfate (PAPs). Analysis of extended simulations provide detailed and useful insights into the atomic interactions that are at work during oligosaccharide processing. The Fast Information Matching method was used to detect the enzyme global dynamics and to predict the pairwise contact of residues responsible for GAG-enzyme binding and unbinding. The correlation between HS displacement and the location of the modified GAG chain were calculated, indicating a possible route for HS and heparin during sulfotransferase processing. Our data also show sulfotransferases contain a conserved interspaced positively charged amino acid residues that form a patch which controls the protein-GAG binding equilibrium. Together, our findings provide further understanding on the fine-tuned complex mechanism of GAG biosynthesis. Our findings can also be extrapolated to other systems for calculating rates of protein-GAG binding.

Factors governing the substitution of La3+ for Ca2+ and Mg2+ in metalloproteins: a DFT/CDM study.

PubMed

Dudev, Todor; Chang, Li-Ying; Lim, Carmay

2005-03-23

Trivalent lanthanide cations are extensively being used in biochemical experiments to probe various dication-binding sites in proteins; however, the factors governing the binding specificity of lanthanide cations for these binding sites remain unclear. Hence, we have performed systematic studies to evaluate the interactions between La3+ and model Ca2+ - and Mg2+ -binding sites using density functional theory combined with continuum dielectric methods. The calculations reveal the key factors and corresponding physical bases favoring the substitution of trivalent lanthanides for divalent Ca2+ and Mg2+ in holoproteins. Replacing Ca2+ or Mg2+ with La3+ is facilitated by (1) minimizing the solvent exposure and the flexibility of the metal-binding cavity, (2) freeing both carboxylate oxygen atoms of Asp/Glu side chains in the metal-binding site so that they could bind bidentately to La3+, (3) maximizing the number of metal-bound carboxylate groups in buried sites, but minimizing the number of metal-bound carboxylate groups in solvent-exposed sites, and (4) including an Asn/Gln side chain for sites lined with four Asp/Glu side chains. In proteins bound to both Mg2+ and Ca2+, La3+ would prefer to replace Ca2+, as compared to Mg2+. A second Mg2+-binding site with a net positive charge would hamper the Mg2+ --> La3+ exchange, as compared to the respective mononuclear site, although the La3+ substitution of the first native metal is more favorable than the second one. The findings of this work are in accord with available experimental data.

Quantum chemical molecular dynamics simulation of single-walled carbon nanotube cap nucleation on an iron particle.

PubMed

Ohta, Yasuhito; Okamoto, Yoshiko; Page, Alister J; Irle, Stephan; Morokuma, Keiji

2009-11-24

The atomic scale details of single-walled carbon nanotube (SWNT) nucleation on metal catalyst particles are elusive to experimental observations. Computer simulation of metal-catalyzed SWNT nucleation is a challenging topic but potentially of great importance to understand the factors affecting SWNT diameters, chirality, and growth efficiency. In this work, we use nonequilibrium density functional tight-binding molecular dynamics simulations and report nucleation of sp(2)-carbon cap structures on an iron particle consisting of 38 atoms. One C(2) molecule was placed every 1.0 ps around an Fe(38) cluster for 30 ps, after which a further 410 ps of annealing simulation without carbon supply was performed. We find that sp(2)-carbon network nucleation and annealing processes occur in three sequential and repetitive stages: (A) polyyne chains on the metal surface react with each other to evolve into a Y-shaped polyyne junction, which preferentially form a five-membered ring as a nucleus; (B) polyyne chains on the first five-membered ring form an additional fused five- or six-membered ring; and (C) pentagon-to-hexagon self-healing rearrangement takes place with the help of short-lived polyyne chains, stabilized by the mobile metal atoms. The observed nucleation process resembles the formation of a fullerene cage. However, the metal particle plays a key role in differentiating the nucleation process from fullerene cage formation, most importantly by keeping the growing cap structure from closing into a fullerene cage and by keeping the carbon edge "alive" for the addition of new carbon material.

A novel generation of 3D SAR-based passive micromixer: efficient mixing and low pressure drop at a low Reynolds number

NASA Astrophysics Data System (ADS)

Viktorov, Vladimir; Nimafar, Mohammad

2013-05-01

This study introduces a novel generation of 3D splitting and recombination (SAR) passive micromixer with microstructures placed on the top and bottom floors of microchannels called a ‘chain mixer’. Both experimental verification and numerical analysis of the flow structure of this type of passive micromixer have been performed to evaluate the mixing performance and pressure drop of the microchannel, respectively. We propose here two types of chain mixer—chain 1 and chain 2—and compare their mixing performance and pressure drop with other micromixers, T-, o- and tear-drop micromixers. Experimental tests carried out in the laminar flow regime with a low Reynolds number range, 0.083 ≤ Re ≤ 4.166, and image-based techniques are used to evaluate the mixing efficiency. Also, the computational fluid dynamics code, ANSYS FLUENT-13.0 has been used to analyze the flow and pressure drop in the microchannel. Experimental results show that the chain and tear-drop mixer's efficiency is very high because of the SAR process: specifically, an efficiency of up to 98% can be achieved at the tested Reynolds number. The results also show that chain mixers have a lower required pressure drop in comparison with a tear-drop micromixer.

Information Theoretically Secure, Enhanced Johnson Noise Based Key Distribution over the Smart Grid with Switched Filters

PubMed Central

2013-01-01

We introduce a protocol with a reconfigurable filter system to create non-overlapping single loops in the smart power grid for the realization of the Kirchhoff-Law-Johnson-(like)-Noise secure key distribution system. The protocol is valid for one-dimensional radial networks (chain-like power line) which are typical of the electricity distribution network between the utility and the customer. The speed of the protocol (the number of steps needed) versus grid size is analyzed. When properly generalized, such a system has the potential to achieve unconditionally secure key distribution over the smart power grid of arbitrary geometrical dimensions. PMID:23936164

Information theoretically secure, enhanced Johnson noise based key distribution over the smart grid with switched filters.

PubMed

Gonzalez, Elias; Kish, Laszlo B; Balog, Robert S; Enjeti, Prasad

2013-01-01

We introduce a protocol with a reconfigurable filter system to create non-overlapping single loops in the smart power grid for the realization of the Kirchhoff-Law-Johnson-(like)-Noise secure key distribution system. The protocol is valid for one-dimensional radial networks (chain-like power line) which are typical of the electricity distribution network between the utility and the customer. The speed of the protocol (the number of steps needed) versus grid size is analyzed. When properly generalized, such a system has the potential to achieve unconditionally secure key distribution over the smart power grid of arbitrary geometrical dimensions.

Influence of moderate-to-strong anisotropic non-Kolmogorov turbulence on intensity fluctuations of a Gaussian–Schell model beam in marine atmosphere

NASA Astrophysics Data System (ADS)

Cheng, Mingjian; Guo, Lixin; Li, Jiangting

2018-05-01

Not Available Project supported by the Open Research Fund of State Key Laboratory of Pulsed Power Laser Technology (Grant No. SKL2016KF05), the Key Industrial Innovation Chain Project in Industrial Domain, China (Grant No. 2017ZDCXL-GY-06-02), the Huawei Innovation Research Program, China (Grant No. HO2017050001AG), and the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 61621005).

Unit and internal chain profiles of maca amylopectin.

PubMed

Zhang, Ling; Li, Guantian; Yao, Weirong; Zhu, Fan

2018-03-01

Unit chain length distributions of amylopectin and its φ, β-limit dextrins, which reflect amylopectin internal structure from three maca starches, were determined by high-performance anion-exchange chromatography with pulsed amperometric detection after debranching, and the samples were compared with maize starch. The amylopectins exhibited average chain lengths ranging from 16.72 to 17.16, with ranges of total internal chain length, external chain length, and internal chain length of the maca amylopectins at 12.49 to 13.68, 11.24 to 11.89, and 4.27 to 4.48. The average chain length, external chain length, internal chain length, and total internal chain length were comparable in three maca amylopectins. Amylopectins of the three maca genotypes studied here presented no significant differences in their unit chain length profiles, but did show significant differences in their internal chain profiles. Additional genetic variations between different maca genotypes need to be studied to provide unit- and internal chain profiles of maca amylopectin. Copyright © 2017. Published by Elsevier Ltd.

Voluntary Medical Male Circumcision: Logistics, Commodities, and Waste Management Requirements for Scale-Up of Services

PubMed Central

Edgil, Dianna; Stankard, Petra; Forsythe, Steven; Rech, Dino; Chrouser, Kristin; Adamu, Tigistu; Sakallah, Sameer; Thomas, Anne Goldzier; Albertini, Jennifer; Stanton, David; Dickson, Kim Eva; Njeuhmeli, Emmanuel

2011-01-01

Background The global HIV prevention community is implementing voluntary medical male circumcision (VMMC) programs across eastern and southern Africa, with a goal of reaching 80% coverage in adult males by 2015. Successful implementation will depend on the accessibility of commodities essential for VMMC programming and the appropriate allocation of resources to support the VMMC supply chain. For this, the United States President’s Emergency Plan for AIDS Relief, in collaboration with the World Health Organization and the Joint United Nations Programme on HIV/AIDS, has developed a standard list of commodities for VMMC programs. Methods and Findings This list of commodities was used to inform program planning for a 1-y program to circumcise 152,000 adult men in Swaziland. During this process, additional key commodities were identified, expanding the standard list to include commodities for waste management, HIV counseling and testing, and the treatment of sexually transmitted infections. The approximate costs for the procurement of commodities, management of a supply chain, and waste disposal, were determined for the VMMC program in Swaziland using current market prices of goods and services. Previous costing studies of VMMC programs did not capture supply chain costs, nor the full range of commodities needed for VMMC program implementation or waste management. Our calculations indicate that depending upon the volume of services provided, supply chain and waste management, including commodities and associated labor, contribute between US$58.92 and US$73.57 to the cost of performing one adult male circumcision in Swaziland. Conclusions Experience with the VMMC program in Swaziland indicates that supply chain and waste management add approximately US$60 per circumcision, nearly doubling the total per procedure cost estimated previously; these additional costs are used to inform the estimate of per procedure costs modeled by Njeuhmeli et al. in “Voluntary Medical Male Circumcision: Modeling the Impact and Cost of Expanding Male Circumcision for HIV Prevention in Eastern and Southern Africa.” Program planners and policy makers should consider the significant contribution of supply chain and waste management to VMMC program costs as they determine future resource needs for VMMC programs. Please see later in the article for the Editors' Summary PMID:22140363

Tag Content Access Control with Identity-based Key Exchange

NASA Astrophysics Data System (ADS)

Yan, Liang; Rong, Chunming

2010-09-01

Radio Frequency Identification (RFID) technology that used to identify objects and users has been applied to many applications such retail and supply chain recently. How to prevent tag content from unauthorized readout is a core problem of RFID privacy issues. Hash-lock access control protocol can make tag to release its content only to reader who knows the secret key shared between them. However, in order to get this shared secret key required by this protocol, reader needs to communicate with a back end database. In this paper, we propose to use identity-based secret key exchange approach to generate the secret key required for hash-lock access control protocol. With this approach, not only back end database connection is not needed anymore, but also tag cloning problem can be eliminated at the same time.

A contemporary approach to validity arguments: a practical guide to Kane's framework.

PubMed

Cook, David A; Brydges, Ryan; Ginsburg, Shiphra; Hatala, Rose

2015-06-01

Assessment is central to medical education and the validation of assessments is vital to their use. Earlier validity frameworks suffer from a multiplicity of types of validity or failure to prioritise among sources of validity evidence. Kane's framework addresses both concerns by emphasising key inferences as the assessment progresses from a single observation to a final decision. Evidence evaluating these inferences is planned and presented as a validity argument. We aim to offer a practical introduction to the key concepts of Kane's framework that educators will find accessible and applicable to a wide range of assessment tools and activities. All assessments are ultimately intended to facilitate a defensible decision about the person being assessed. Validation is the process of collecting and interpreting evidence to support that decision. Rigorous validation involves articulating the claims and assumptions associated with the proposed decision (the interpretation/use argument), empirically testing these assumptions, and organising evidence into a coherent validity argument. Kane identifies four inferences in the validity argument: Scoring (translating an observation into one or more scores); Generalisation (using the score[s] as a reflection of performance in a test setting); Extrapolation (using the score[s] as a reflection of real-world performance), and Implications (applying the score[s] to inform a decision or action). Evidence should be collected to support each of these inferences and should focus on the most questionable assumptions in the chain of inference. Key assumptions (and needed evidence) vary depending on the assessment's intended use or associated decision. Kane's framework applies to quantitative and qualitative assessments, and to individual tests and programmes of assessment. Validation focuses on evaluating the key claims, assumptions and inferences that link assessment scores with their intended interpretations and uses. The Implications and associated decisions are the most important inferences in the validity argument. © 2015 John Wiley & Sons Ltd.

Impact of green supply chain management practices on firms' performance: an empirical study from the perspective of Pakistan.

PubMed

Khan, Syed Abdul Rehman; Qianli, Dong

2017-07-01

This article investigates the impact of five determinants of the green supply chain practices on organizational performance in the context of Pakistan manufacturing firms. A sample of 218 firms was collected from the manufacturing industry. The green supply chain practices were measured through five independent variables including green manufacturing, green purchasing, green information systems, cooperation with customers, and eco-design. By using exploratory factor and simultaneous regression analysis, the results indicate that except green purchasing, rests of the four independent variables have been found statistically significant to predict organizational performance. However, the eco-design of green practices followed by green information systems has revealed the greatest impact on organizational performance. Therefore, the managers of the manufacturing firms should not only implement eco-design in their supply chain but also concentrate on proper monitoring and implementation of green information systems to increase their firms' performance. A main contribution of this research from theoretical side is that it is possible to notice a negative effect of "green purchasing" towards organizational performance particularly in the scenario of Pakistan manufacturing industry. Another valuable result is that green purchasing is an important antecedent of firms economic performance in the US manufacturing firms (Green et al. 2012), although not significantly related to organizational performance in our study. In addition, we also discussed research limitations, areas for future research, and implications for practitioners.

Can Simple Transmission Chains Foster Collective Intelligence in Binary-Choice Tasks?

PubMed Central

Moussaïd, Mehdi; Seyed Yahosseini, Kyanoush

2016-01-01

In many social systems, groups of individuals can find remarkably efficient solutions to complex cognitive problems, sometimes even outperforming a single expert. The success of the group, however, crucially depends on how the judgments of the group members are aggregated to produce the collective answer. A large variety of such aggregation methods have been described in the literature, such as averaging the independent judgments, relying on the majority or setting up a group discussion. In the present work, we introduce a novel approach for aggregating judgments—the transmission chain—which has not yet been consistently evaluated in the context of collective intelligence. In a transmission chain, all group members have access to a unique collective solution and can improve it sequentially. Over repeated improvements, the collective solution that emerges reflects the judgments of every group members. We address the question of whether such a transmission chain can foster collective intelligence for binary-choice problems. In a series of numerical simulations, we explore the impact of various factors on the performance of the transmission chain, such as the group size, the model parameters, and the structure of the population. The performance of this method is compared to those of the majority rule and the confidence-weighted majority. Finally, we rely on two existing datasets of individuals performing a series of binary decisions to evaluate the expected performances of the three methods empirically. We find that the parameter space where the transmission chain has the best performance rarely appears in real datasets. We conclude that the transmission chain is best suited for other types of problems, such as those that have cumulative properties. PMID:27880825

A modeling assessment of the physicochemical properties and environmental fate of emerging and novel per- and polyfluoroalkyl substances.

PubMed

Gomis, Melissa Ines; Wang, Zhanyun; Scheringer, Martin; Cousins, Ian T

2015-02-01

Long-chain perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkane sulfonic acids (PFSAs) are persistent, bioaccumulative, and toxic contaminants that are globally present in the environment, wildlife and humans. Phase-out actions and use restrictions to reduce the environmental release of long-chain PFCAs, PFSAs and their precursors have been taken since 2000. In particular, long-chain poly- and perfluoroalkyl substances (PFASs) are being replaced with shorter-chain homologues or other fluorinated or non-fluorinated alternatives. A key question is: are these alternatives, particularly the structurally similar fluorinated alternatives, less hazardous to humans and the environment than the substances they replace? Several fluorinated alternatives including perfluoroether carboxylic acids (PFECAs) and perfluoroether sulfonic acids (PFESAs) have been recently identified. However, the scarcity of experimental data prevents hazard and risk assessments for these substances. In this study, we use state-of-the-art in silico tools to estimate key properties of these newly identified fluorinated alternatives. [i] COSMOtherm and SPARC are used to estimate physicochemical properties. The US EPA EPISuite software package is used to predict degradation half-lives in air, water and soil. [ii] In combination with estimated chemical properties, a fugacity-based multimedia mass-balance unit-world model - the OECD Overall Persistence (POV) and Long-Range Transport Potential (LRTP) Screening Tool - is used to assess the likely environmental fate of these alternatives. Even though the fluorinated alternatives contain some structural differences, their physicochemical properties are not significantly different from those of their predecessors. Furthermore, most of the alternatives are estimated to be similarly persistent and mobile in the environment as the long-chain PFASs. The models therefore predict that the fluorinated alternatives will become globally distributed in the environment similar to their predecessors. Although such in silico methods are coupled with uncertainties, this preliminary assessment provides enough cause for concern to warrant experimental work to better determine the properties of these fluorinated alternatives. Copyright © 2014 Elsevier B.V. All rights reserved.

Mycotoxin in the food supply chain-implications for public health program.

PubMed

Milićević, D; Nastasijevic, I; Petrovic, Z

2016-10-01

Mycotoxins are a group of naturally occurring toxic chemical substances, produced mainly by microscopic filamentous fungal species. Regarding potential synergisms or even mitigating effects between toxic elements, mycotoxin contamination will continue to be an area of concern for producers, manufacturers, regulatory agencies, researchers, and consumers in the future. In Serbia, recent drought and then flooding confirmed that mycotoxins are one of the foodborne hazards most susceptible to climate change. In this article, we review key aspects of mycotoxin contamination of the food supply chain and implications for public health from the Serbian perspective.

The effect of green supply chain management implementation to marketing performance through company competitiveness (study on paper industry in West Java)

NASA Astrophysics Data System (ADS)

Hijuzaman, O.; Rahayu, A.; Kusnendi

2018-05-01

The purpose of this study was to determine and analyze the effect of direct and indirect implementation of Green Supply-Chain Management (GSCM) on the Performance Marketing and Competitiveness Mediation Paper Company in West Java province. Object This research is the paper company that existed in West Java Province, which amounts to 30 companies as well as a sample of research, while variables studied are Variable Green Supply- Chain Management, Company Competitiveness Variable and Variable of Paper Marketing Industry Performance in West Java Province. The method used SEM with Variance Based or Component Based with Software used is SmartPLS 3.0. On this research are identified that no effect of Competitiveness on Marketing Performance in Paper Companies in West Java Province.

Jetfighter: An Experiential Value Chain Exercise

ERIC Educational Resources Information Center

Sheehan, Norman T.; Gamble, Edward N.

2010-01-01

Value chain analysis is widely taught in business schools and applied by practitioners to improve business performance. Despite its ubiquity, many students struggle to understand and apply value chain concepts in practice. JetFighter uses a complex manufacturing process (making intricate paper planes) to provide students an opportunity to enhance…

C4I: Weapon or Achilles’ Heel

DTIC Science & Technology

1994-06-17

LINK? .......... .. 19 The People ...... ............... .. 19 The Impact .......... ............ .. 21 V WHAT DOES IT ALL MEAN ? ... ......... .. 23...people who will serve as the key link in the chain needed to pull the system together. 22 CHAPTER V WHAT DOES IT ALL MEAN ? Conclusions. As the military

Optical design of cipher block chaining (CBC) encryption mode by using digital holography

NASA Astrophysics Data System (ADS)

Gil, Sang Keun; Jeon, Seok Hee; Jung, Jong Rae; Kim, Nam

2016-03-01

We propose an optical design of cipher block chaining (CBC) encryption by using digital holographic technique, which has higher security than the conventional electronic method because of the analog-type randomized cipher text with 2-D array. In this paper, an optical design of CBC encryption mode is implemented by 2-step quadrature phase-shifting digital holographic encryption technique using orthogonal polarization. A block of plain text is encrypted with the encryption key by applying 2-step phase-shifting digital holography, and it is changed into cipher text blocks which are digital holograms. These ciphered digital holograms with the encrypted information are Fourier transform holograms and are recorded on CCDs with 256 gray levels quantized intensities. The decryption is computed by these encrypted digital holograms of cipher texts, the same encryption key and the previous cipher text. Results of computer simulations are presented to verify that the proposed method shows the feasibility in the high secure CBC encryption system.

CAWSES Related Projects in Japan : Grant-in-Aid for Creative Scientific Research ügBasic Study of Space Weather Predictionüh and CHAIN (Continuous H Alpha Imaging Network)

NASA Astrophysics Data System (ADS)

Shibata, K.; Kurokawa, H.

The Grant-in-Aid for Creative Scientific Research of the Ministry of Education Science Sports Technology and Culture of Japan The Basic Study of Space Weather Prediction PI K Shibata Kyoto Univ has started in 2005 as 5 years projects with total budget 446Myen The purpose of this project is to develop a physical model of solar-terrestrial phenomena and space storms as a basis of space weather prediction by resolving fundamental physics of key phenomena from solar flares and coronal mass ejections to magnetospheric storms under international cooperation program CAWSES Climate and Weather of the Sun-Earth System Continuous H Alpha Imaging Network CHAIN Project led by H Kurokawa is a key project in this space weather study enabling continuous H alpha full Sun observations by connecting many solar telescopes in many countries through internet which provides the basis of the study of space weather prediction

Dependency of magnetic microwave absorption on surface architecture of Co20Ni80 hierarchical structures studied by electron holography

NASA Astrophysics Data System (ADS)

Liu, Qinhe; Xu, Xianhui; Xia, Weixing; Che, Renchao; Chen, Chen; Cao, Qi; He, Jingang

2015-01-01

To design and fabricate rational surface architecture of individual particles is one of the key factors that affect their magnetic properties and microwave absorption capability, which is still a great challenge. Herein, a series of Co20Ni80 hierarchical structures with different surface morphologies, including flower-, urchin-, ball-, and chain-like morphologies, were obtained using structure-directing templates via a facile one-step solvothermal treatment. The microwave reflection loss (RL) of urchin-like Co20Ni80 hierarchical structures reaches as high as -33.5 dB at 3 GHz, with almost twice the RL intensity of the ball- and chain-like structures, and the absorption bandwidth (<-10 dB) is about 5.5 GHz for the flower-like morphology, indicating that the surface nanospikes and nanoflakes on the Co20Ni80 microsphere surfaces have great influences on their magnetic microwave absorption properties. Electron holography analysis reveals that the surface nanospikes and nanoflakes could generate a high density of stray magnetic flux lines and contribute a large saturation magnetization (105.62 emu g-1 for urchin-like and 96.41 emu g-1 for flower-like morphology), leading the urchin-like and flower-like Co20Ni80 to possess stronger microwave RL compared with the ball-like and chain-like Co20Ni80 alloys. The eddy-current absorption mechanism μ''(μ')-2(f)-1 is dominant in the frequency region above 8 GHz, implying that eddy-current loss is a vital factor for microwave RL in the high frequency range. It can be supposed from our findings that different surface morphologies of magnetic hierarchical structures might become an effective path to achieve high-performance microwave absorption for electromagnetic shielding and stealth camouflage applications.To design and fabricate rational surface architecture of individual particles is one of the key factors that affect their magnetic properties and microwave absorption capability, which is still a great challenge. Herein, a series of Co20Ni80 hierarchical structures with different surface morphologies, including flower-, urchin-, ball-, and chain-like morphologies, were obtained using structure-directing templates via a facile one-step solvothermal treatment. The microwave reflection loss (RL) of urchin-like Co20Ni80 hierarchical structures reaches as high as -33.5 dB at 3 GHz, with almost twice the RL intensity of the ball- and chain-like structures, and the absorption bandwidth (<-10 dB) is about 5.5 GHz for the flower-like morphology, indicating that the surface nanospikes and nanoflakes on the Co20Ni80 microsphere surfaces have great influences on their magnetic microwave absorption properties. Electron holography analysis reveals that the surface nanospikes and nanoflakes could generate a high density of stray magnetic flux lines and contribute a large saturation magnetization (105.62 emu g-1 for urchin-like and 96.41 emu g-1 for flower-like morphology), leading the urchin-like and flower-like Co20Ni80 to possess stronger microwave RL compared with the ball-like and chain-like Co20Ni80 alloys. The eddy-current absorption mechanism μ''(μ')-2(f)-1 is dominant in the frequency region above 8 GHz, implying that eddy-current loss is a vital factor for microwave RL in the high frequency range. It can be supposed from our findings that different surface morphologies of magnetic hierarchical structures might become an effective path to achieve high-performance microwave absorption for electromagnetic shielding and stealth camouflage applications. Electronic supplementary information (ESI) available: EDS analysis data, SEM images, electron holography schematic diagram, electron holography and magnetic hysteresis loops. See DOI: 10.1039/c4nr05547k

The NASA Human Space Flight Supply Chain, Current and Future

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2007-01-01

The current NASA Human Space Flight transportation system, the Space Shuttle, is scheduled for final flight in 2010. The Exploration initiative will create a new capability with a combination of existing systems and new flight and ground elements. To fully understand and act on the implications of such change it is necessary to understand what, how, when and where such changes occur and more importantly, how all these interact. This paper presents Human Space Flight, with an emphasis on KSC Launch and Landing, as a Supply Chain of both information and materials. A supply chain methodology for understanding the flow of information and materials is presented. Further, modeling and simulation projects funded by the Exploration initiative to understand the NASA Exploration Supply Chain are explained. Key concepts and their purpose, including the Enterprise, Locations, Physical and Organizational Functional Units, Products, and Resources, are explained. It is shown that the art, science and perspective of Supply Chain Management is not only applicable to such a government & contractor operation, it is also an invaluable approach for understanding, focusing improvement and growth. It is shown that such commercial practice applies to Human Space Flight and is invaluable towards one day creating routine, affordable access to and from space.

Role of free fatty acid receptors in the regulation of energy metabolism.

PubMed

Hara, Takafumi; Kashihara, Daiji; Ichimura, Atsuhiko; Kimura, Ikuo; Tsujimoto, Gozoh; Hirasawa, Akira

2014-09-01

Free fatty acids (FFAs) are energy-generating nutrients that act as signaling molecules in various cellular processes. Several orphan G protein-coupled receptors (GPCRs) that act as FFA receptors (FFARs) have been identified and play important physiological roles in various diseases. FFA ligands are obtained from food sources and metabolites produced during digestion and lipase degradation of triglyceride stores. FFARs can be grouped according to ligand profiles, depending on the length of carbon chains of the FFAs. Medium- and long-chain FFAs activate FFA1/GPR40 and FFA4/GPR120. Short-chain FFAs activate FFA2/GPR43 and FFA3/GPR41. However, only medium-chain FFAs, and not long-chain FFAs, activate GPR84 receptor. A number of pharmacological and physiological studies have shown that these receptors are expressed in various tissues and are primarily involved in energy metabolism. Because an impairment of these processes is a part of the pathology of obesity and type 2 diabetes, FFARs are considered as key therapeutic targets. Here, we reviewed recently published studies on the physiological functions of these receptors, primarily focusing on energy homeostasis. Copyright © 2014 Elsevier B.V. All rights reserved.

The importance of chain length for the polyphosphate enhancement of acidic potassium permanganate chemiluminescence.

PubMed

Holland, Brendan J; Adcock, Jacqui L; Nesterenko, Pavel N; Peristyy, Anton; Stevenson, Paul G; Barnett, Neil W; Conlan, Xavier A; Francis, Paul S

2014-09-09

Sodium polyphosphate is commonly used to enhance chemiluminescence reactions with acidic potassium permanganate through a dual enhancement mechanism, but commercially available polyphosphates vary greatly in composition. We have examined the influence of polyphosphate composition and concentration on both the dual enhancement mechanism of chemiluminescence intensity and the stability of the reagent under analytically useful conditions. The average chain length (n) provides a convenient characterisation, but materials with similar values can exhibit markedly different distributions of phosphate oligomers. There is a minimum polyphosphate chain length (∼6) required for a large enhancement of the emission intensity, but no further advantage was obtained using polyphosphate materials with much longer average chain lengths. Providing there is a sufficient average chain length, the optimum concentration of polyphosphate is dependent on the analyte and in some cases, may be lower than the quantities previously used in routine detection. However, the concentration of polyphosphate should not be lowered in permanganate reagents that have been partially reduced to form high concentrations of the key manganese(III) co-reactant, as this intermediate needs to be stabilised to prevent formation of insoluble manganese(IV). Copyright © 2014 Elsevier B.V. All rights reserved.

Differences in Beef Quality between Angus (Bos taurus taurus) and Nellore (Bos taurus indicus) Cattle through a Proteomic and Phosphoproteomic Approach.

PubMed

Rodrigues, Rafael Torres de Souza; Chizzotti, Mario Luiz; Vital, Camilo Elber; Baracat-Pereira, Maria Cristina; Barros, Edvaldo; Busato, Karina Costa; Gomes, Rafael Aparecido; Ladeira, Márcio Machado; Martins, Taiane da Silva

2017-01-01

Proteins are the major constituents of muscle and are key molecules regulating the metabolic changes during conversion of muscle to meat. Brazil is one of the largest exporters of beef and most Brazilian cattle are composed by zebu (Nellore) genotype. Bos indicus beef is generally leaner and tougher than Bos taurus such as Angus. The aim of this study was to compare the muscle proteomic and phosphoproteomic profile of Angus and Nellore. Seven animals of each breed previously subjected the same growth management were confined for 84 days. Proteins were extracted from Longissimus lumborum samples collected immediately after slaughter and separated by two-dimensional electrophoresis. Pro-Q Diamond stain was used in phosphoproteomics. Proteins identification was performed using matrix assisted laser desorption/ionization time-of-flight mass spectrometry. Tropomyosin alpha-1 chain, troponin-T, myosin light chain-1 fragment, cytoplasmic malate dehydrogenase, alpha-enolase and 78 kDa glucose-regulated protein were more abundant in Nellore, while myosin light chain 3, prohibitin, mitochondrial stress-70 protein and heat shock 70 kDa protein 6 were more abundant in Angus (P<0.05). Nellore had higher phosphorylation of myosin regulatory light chain-2, alpha actin-1, triosephosphate isomerase and 14-3-3 protein epsilon. However, Angus had greater phosphorylation of phosphoglucomutase-1 and troponin-T (P<0.05). Therefore, proteins involved in contraction and muscle organization, myofilaments expressed in fast or slow-twitch fibers and heat shock proteins localized in mitochondria or sarcoplasmic reticulum and involved in cell flux of calcium and apoptosis might be associated with differences in beef quality between Angus and Nellore. Furthermore, prohibitin appears to be a potential biomarker of intramuscular fat in cattle. Additionally, differences in phosphorylation of myofilaments and glycolytic enzymes could be involved with differences in muscle contraction force, susceptibility to calpain, apoptosis and postmortem glycolysis, which might also be related to differences in beef quality among Angus and Nellore.

Simulated glass-forming polymer melts: dynamic scattering functions, chain length effects, and mode-coupling theory analysis.

PubMed

Frey, S; Weysser, F; Meyer, H; Farago, J; Fuchs, M; Baschnagel, J

2015-02-01

We present molecular-dynamics simulations for a fully flexible model of polymer melts with different chain length N ranging from short oligomers (N = 4) to values near the entanglement length (N = 64). For these systems we explore the structural relaxation of the supercooled melt near the critical temperature T c of mode-coupling theory (MCT). Coherent and incoherent scattering functions are analyzed in terms of the idealized MCT. For temperatures T > T c we provide evidence for the space-time factorization property of the β relaxation and for the time-temperature superposition principle (TTSP) of the α relaxation, and we also discuss deviations from these predictions for T ≈ T c. For T larger than the smallest temperature where the TTSP holds we perform a quantitative analysis of the dynamics with the asymptotic MCT predictions for the late β regime. Within MCT a key quantity, in addition to T c, is the exponent parameter λ. For the fully flexible polymer models studied we find that λ is independent of N and has a value (λ = 0.735 ) typical of simple glass-forming liquids. On the other hand, the critical temperature increases with chain length toward an asymptotic value T c (∞) . This increase can be described by T c (∞) - T c(N) ∼ 1/N and may be interpreted in terms of the N dependence of the monomer density ρ, if we assume that the MCT glass transition is ruled by a soft-sphere-like constant coupling parameter Γ c = ρ c T c (-1/4), where ρ c is the monomer density at T c. In addition, we also estimate T c from a Hansen-Verlet-like criterion and MCT calculations based on structural input from the simulation. For our polymer model both the Hansen-Verlet criterion and the MCT calculations suggest T c to decrease with increasing chain length, in contrast to the direct analysis of the simulation data.

Differences in Beef Quality between Angus (Bos taurus taurus) and Nellore (Bos taurus indicus) Cattle through a Proteomic and Phosphoproteomic Approach

PubMed Central

Chizzotti, Mario Luiz; Vital, Camilo Elber; Baracat-Pereira, Maria Cristina; Barros, Edvaldo; Busato, Karina Costa; Gomes, Rafael Aparecido; Ladeira, Márcio Machado; Martins, Taiane da Silva

2017-01-01

Proteins are the major constituents of muscle and are key molecules regulating the metabolic changes during conversion of muscle to meat. Brazil is one of the largest exporters of beef and most Brazilian cattle are composed by zebu (Nellore) genotype. Bos indicus beef is generally leaner and tougher than Bos taurus such as Angus. The aim of this study was to compare the muscle proteomic and phosphoproteomic profile of Angus and Nellore. Seven animals of each breed previously subjected the same growth management were confined for 84 days. Proteins were extracted from Longissimus lumborum samples collected immediately after slaughter and separated by two-dimensional electrophoresis. Pro-Q Diamond stain was used in phosphoproteomics. Proteins identification was performed using matrix assisted laser desorption/ionization time-of-flight mass spectrometry. Tropomyosin alpha-1 chain, troponin-T, myosin light chain-1 fragment, cytoplasmic malate dehydrogenase, alpha-enolase and 78 kDa glucose-regulated protein were more abundant in Nellore, while myosin light chain 3, prohibitin, mitochondrial stress-70 protein and heat shock 70 kDa protein 6 were more abundant in Angus (P<0.05). Nellore had higher phosphorylation of myosin regulatory light chain-2, alpha actin-1, triosephosphate isomerase and 14-3-3 protein epsilon. However, Angus had greater phosphorylation of phosphoglucomutase-1 and troponin-T (P<0.05). Therefore, proteins involved in contraction and muscle organization, myofilaments expressed in fast or slow-twitch fibers and heat shock proteins localized in mitochondria or sarcoplasmic reticulum and involved in cell flux of calcium and apoptosis might be associated with differences in beef quality between Angus and Nellore. Furthermore, prohibitin appears to be a potential biomarker of intramuscular fat in cattle. Additionally, differences in phosphorylation of myofilaments and glycolytic enzymes could be involved with differences in muscle contraction force, susceptibility to calpain, apoptosis and postmortem glycolysis, which might also be related to differences in beef quality among Angus and Nellore. PMID:28103301

Multi-chain Markov chain Monte Carlo methods for computationally expensive models

NASA Astrophysics Data System (ADS)

Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

2017-12-01

Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

Evaluating minimalist mimics by exploring key orientations on secondary structures (EKOS)☟

PubMed Central

Xin, Dongyue; Ko, Eunhwa; Perez, Lisa M.; Ioerger, Thomas R.; Burgess, Kevin

2013-01-01

Peptide mimics that display amino acid side-chains on semi-rigid scaffolds (not peptide polyamides) can be referred to as minimalist mimics. Accessible conformations of these scaffolds may overlay with secondary structures giving, for example, “minimalist helical mimics”. It is difficult for researchers who want to apply minimalist mimics to decide which one to use because there is no widely accepted protocol for calibrating how closely these compounds mimic secondary structures. Moreover, it is also difficult for potential practitioners to evaluate which ideal minimalist helical mimics are preferred for a particular set of side-chains. For instance, what mimic presents i, i+4, i+7 side-chains in orientations that best resemble an ideal α-helix, and is a different mimic required for a i, i+3, i+7 helical combination? This article describes a protocol for fitting each member of an array of accessible scaffold conformations on secondary structures. The protocol involves: (i) use quenched molecular dynamics (QMD) to generate an ensemble consisting of hundreds of accessible, low energy conformers of the mimics; (ii) representation of each of these as a set of Cα and Cβ coordinates corresponding to three amino acid side-chains displayed by the scaffolds;(iii) similar representation of each combination of three side-chains in each ideal secondary structure as a set of Cα and Cβ coordinates corresponding to three amino acid side-chains displayed by the scaffolds; and, (iv) overlay Cα and Cβ coordinates of all the conformers on all the sets of side-chain “triads” in the ideal secondary structures and express the goodness of fit in terms of root mean squared deviation (RMSD, Å) for each overlay. We refer to this process as Exploring Key Orientations on Secondary structures (EKOS). Application of this procedure reveals the relative bias of a scaffold to overlay on different secondary structures, the “side-chain correspondences” (eg i, i+4, i+7 or i, i+3, i+4) of those overlays, and the energy of this state relative to the minimum located. This protocol was tested on some of the most widely cited minimalist α-helical mimics (1 – 8 in the text). The data obtained indicates several of these compounds preferentially exist in conformations that resemble other secondary structures as well as α-helices, and many of the α-helical conformations have unexpected side-chain correspondences. These observations imply the featured minimalist mimics have more scope for disrupting PPI interfaces than previously anticipated. Finally, the same simulation method was used to match preferred conformations of minimalist mimics with actual protein/peptide structures at interfaces providing quantitative comparisons of predicted fits of the test mimics at protein-protein interaction sites. PMID:24121516

Evaluating minimalist mimics by exploring key orientations on secondary structures (EKOS).

PubMed

Xin, Dongyue; Ko, Eunhwa; Perez, Lisa M; Ioerger, Thomas R; Burgess, Kevin

2013-11-28

Peptide mimics that display amino acid side-chains on semi-rigid scaffolds (not peptide polyamides) can be referred to as minimalist mimics. Accessible conformations of these scaffolds may overlay with secondary structures giving, for example, "minimalist helical mimics". It is difficult for researchers who want to apply minimalist mimics to decide which one to use because there is no widely accepted protocol for calibrating how closely these compounds mimic secondary structures. Moreover, it is also difficult for potential practitioners to evaluate which ideal minimalist helical mimics are preferred for a particular set of side-chains. For instance, what mimic presents i, i + 4, i + 7 side-chains in orientations that best resemble an ideal α-helix, and is a different mimic required for a i, i + 3, i + 7 helical combination? This article describes a protocol for fitting each member of an array of accessible scaffold conformations on secondary structures. The protocol involves: (i) use quenched molecular dynamics (QMD) to generate an ensemble consisting of hundreds of accessible, low energy conformers of the mimics; (ii) representation of each of these as a set of Cα and Cβ coordinates corresponding to three amino acid side-chains displayed by the scaffolds; (iii) similar representation of each combination of three side-chains in each ideal secondary structure as a set of Cα and Cβ coordinates corresponding to three amino acid side-chains displayed by the scaffolds; and, (iv) overlay Cα and Cβ coordinates of all the conformers on all the sets of side-chain "triads" in the ideal secondary structures and express the goodness of fit in terms of root mean squared deviation (RMSD, Å) for each overlay. We refer to this process as Exploring Key Orientations on Secondary structures (EKOS). Application of this procedure reveals the relative bias of a scaffold to overlay on different secondary structures, the "side-chain correspondences" (e.g. i, i + 4, i + 7 or i, i + 3, i + 4) of those overlays, and the energy of this state relative to the minimum located. This protocol was tested on some of the most widely cited minimalist α-helical mimics (1-8 in the text). The data obtained indicates several of these compounds preferentially exist in conformations that resemble other secondary structures as well as α-helices, and many of the α-helical conformations have unexpected side-chain correspondences. These observations imply the featured minimalist mimics have more scope for disrupting PPI interfaces than previously anticipated. Finally, the same simulation method was used to match preferred conformations of minimalist mimics with actual protein/peptide structures at interfaces providing quantitative comparisons of predicted fits of the test mimics at protein-protein interaction sites.

Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption.

PubMed

Li, Yongfang

2012-05-15

Bulk heterojunction (BHJ) polymer solar cells (PSCs) sandwich a blend layer of conjugated polymer donor and fullerene derivative acceptor between a transparent ITO positive electrode and a low work function metal negative electrode. In comparison with traditional inorganic semiconductor solar cells, PSCs offer a simpler device structure, easier fabrication, lower cost, and lighter weight, and these structures can be fabricated into flexible devices. But currently the power conversion efficiency (PCE) of the PSCs is not sufficient for future commercialization. The polymer donors and fullerene derivative acceptors are the key photovoltaic materials that will need to be optimized for high-performance PSCs. In this Account, I discuss the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules. I also summarize recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photovoltaic materials by my research group and others. For high-efficiency conjugated polymer donors, key requirements are a narrower energy bandgap (E(g)) and broad absorption, relatively lower-lying HOMO (the highest occupied molecular orbital) level, and higher hole mobility. There are three strategies to meet these requirements: D-A copolymerization for narrower E(g) and lower-lying HOMO, substitution with electron-withdrawing groups for lower-lying HOMO, and two-dimensional conjugation for broad absorption and higher hole mobility. Moreover, better main chain planarity and less side chain steric hindrance could strengthen π-π stacking and increase hole mobility. Furthermore, the molecular weight of the polymers also influences their photovoltaic performance. To produce high efficiency photovoltaic polymers, researchers should attempt to increase molecular weight while maintaining solubility. High-efficiency D-A copolymers have been obtained by using benzodithiophene (BDT), dithienosilole (DTS), or indacenodithiophene (IDT) donor unit and benzothiadiazole (BT), thienopyrrole-dione (TPD), or thiazolothiazole (TTz) acceptor units. The BDT unit with two thienyl conjugated side chains is a highly promising unit in constructing high-efficiency copolymer donor materials. The electron-withdrawing groups of ester, ketone, fluorine, or sulfonyl can effectively tune the HOMO energy levels downward. To improve the performance of fullerene derivative acceptors, researchers will need to strengthen absorption in the visible spectrum, upshift the LUMO (the lowest unoccupied molecular orbital) energy level, and increase the electron mobility. [6,6]-Phenyl-C(71)-butyric acid methyl ester (PC(70)BM) is superior to [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) because C(70) absorbs visible light more efficiently. Indene-C(60) bisadduct (ICBA) and Indene-C(70) bisadduct (IC(70)BA) show 0.17 and 0.19 eV higher LUMO energy levels, respectively, than PCBM, due to the electron-rich character of indene and the effect of bisadduct. ICBA and IC(70)BA are excellent acceptors for the P3HT-based PSCs.

Progress in combating cigarette smuggling: controlling the supply chain

PubMed Central

Joossens, L; Raw, M

2008-01-01

Background: The illicit tobacco trade results in huge losses of revenue to governments, estimated at $US40–50 billion in 2006, and in increased consumption and thus health problems because it makes tobacco available more cheaply. On 20 October 2008 the second meeting of the International Negotiating Body (INB2) on the illicit trade protocol of WHO’s Framework Convention on Tobacco Control (FCTC) will discuss measures to tackle the illicit trade in tobacco products. Methods: This paper presents the experience over the last decade of three countries, Italy, Spain and the United Kingdom, which shows that tobacco smuggling can be successfully tackled. Conclusion: The evidence strongly suggests that the key to controlling smuggling is controlling the supply chain, and that the supply chain is controlled to a great extent by the tobacco industry. PMID:18784154

The role of free kappa and lambda light chains in the pathogenesis and treatment of inflammatory diseases.

PubMed

Esparvarinha, Mojgan; Nickho, Hamid; Mohammadi, Hamed; Aghebati-Maleki, Leili; Abdolalizadeh, Jalal; Majidi, Jafar

2017-07-01

Kappa (κ) or lambda (λ) free light chains (FLCs) are produced from B cells during immunoglobulin synthesis. FLCs have been shown to participate in several key processes of immune responses. They are necessary to adjust PMN functions and assist PMN pre-stimulation. Moreover, they cause mast cell degranulation which releases pro-inflammatory mediators and stimulates local inflammatory responses in some conditions such as inflammatory bowel disease (IBD). Having low molecular weights which may straightly be toxic to proximal tubule cells (PTCs), FLCs can also have an important role in renal diseases. In this review we have highlighted the involvement of light chains in the pathogenesis of some inflammatory diseases and discussed their potential to be the targets of therapeutic purposes. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Circuit topology of proteins and nucleic acids.

PubMed

Mashaghi, Alireza; van Wijk, Roeland J; Tans, Sander J

2014-09-02

Folded biomolecules display a bewildering structural complexity and diversity. They have therefore been analyzed in terms of generic topological features. For instance, folded proteins may be knotted, have beta-strands arranged into a Greek-key motif, or display high contact order. In this perspective, we present a method to formally describe the topology of all folded linear chains and hence provide a general classification and analysis framework for a range of biomolecules. Moreover, by identifying the fundamental rules that intrachain contacts must obey, the method establishes the topological constraints of folded linear chains. We also briefly illustrate how this circuit topology notion can be applied to study the equivalence of folded chains, the engineering of artificial RNA structures and DNA origami, the topological structure of genomes, and the role of topology in protein folding. Copyright © 2014 Elsevier Ltd. All rights reserved.

First total syntheses of (Z)-15-methyl-10-hexadecenoic acid and the (Z)-13-methyl-8-tetradecenoic acid

PubMed Central

Carballeira, Néstor M.; Montano, Nashbly; Padilla, Luis F.

2006-01-01

The first total syntheses for the (Z)-15-methyl-10-hexadecenoic acid and the (Z)-13-methyl-8-tetradecenoic acid were accomplished in seven steps and in 31–32% overall yields. The (trimethylsilyl)acetylene was the key reagent in both syntheses. It is proposed that the best synthetic strategy towards monounsaturated iso methyl-branched fatty acids with double bonds close to the ω end of the acyl chain is first acetylide coupling of (trimethylsilyl)acetylene to a long-chain bifunctional bromoalkane followed by a second acetylide coupling to a short-chain iso bromoalkane, since higher yields are thus obtained. Spectral data is also presented for the first time for these two unusual fatty acids with potential as biomarkers and as topoisomerase I inhibitors. PMID:17125759

Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

ERIC Educational Resources Information Center

Wang, Heng

2017-01-01

Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

Medium-chain triglycerides are advantageous in promoting weight loss although not beneficial to exercise performance.

PubMed

Clegg, Miriam E

2010-11-01

Medium-chain triglycerides (MCT) are triglycerides with a fatty acid chain length varying between 6 and 10 carbon atoms. MCT differ from long-chain triglycerides as they are relatively soluble in water and, hence, rapidly hydrolysed and absorbed. MCT are transported in the blood through the portal system, consequently they bypass adipose tissue that makes them less susceptible to hormone-sensitive lipase and deposition into adipose tissue stores. Due to these properties, MCT have been researched for both benefits to exercise performance and health. The present review aims to assess whether MCT are beneficial in either of these situations. MCT have been proposed as a means to maximizing an athlete's ability to maintain their glycogen stores so they can be more competitive. However, only two studies to date have shown an improvement in exercise performance. From a health perspective, MCT increase fat oxidation and energy expenditure as well as reduce food intake and beneficially alter body composition. Results indicate that MCT feeding is ineffective in improving exercise performance and future work should focus on the health benefits and applications of MCT.

Self-organization and stability of magnetosome chains—A simulation study

PubMed Central

Faivre, Damien; Klumpp, Stefan

2018-01-01

Magnetotactic bacteria orient in magnetic fields with the help of their magnetosome chain, a linear structure of membrane enclosed magnetic nanoparticles (magnetosomes) anchored to a cytoskeletal filament. Here, we use simulations to study the assembly and the stability of magnetosome chains. We introduce a computational model describing the attachment of the magnetosomes to the filament and their magnetic interactions. We show that the filamentous backbone is crucial for the robust assembly of the magnetic particles into a linear chain, which in turn is key for the functionality of the chain in cellular orientation and magnetically directed swimming. In addition, we simulate the response to an external magnetic field that is rotated away from the axis of the filament, an experimental method used to probe the mechanical stability of the chain. The competition between alignment along the filament and alignment with the external fields leads to the rupture of a chain if the applied field exceeeds a threshold value. These observations are in agreement with previous experiments at the population level. Beyond that, our simulations provide a detailed picture of chain rupture at the single cell level, which is found to happen through two abrupt events, which both depend on the field strength and orientation. The re-formation of the chain structure after such rupture is found to be strongly sped up in the presence of a magnetic field parallel to the filament, an observation that may also be of interest for the design of self-healing materials. Our simulations underline the dynamic nature of the magnetosome chain. More generally, they show the rich complexity of self-assembly in systems with competing driving forces for alignment. PMID:29315342

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Sangmo; Paranthaman, Mariappan Parans; Noh, Tae Won

The voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When themore » grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag +/Ag redox reaction to Ag +-ion diffusion with the increase in the applied voltage and pulse duration. Our study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities.« less

Adsorption and flocculation by polymers and polymer mixtures.

PubMed

Gregory, John; Barany, Sandor

2011-11-14

Polymers of various types are in widespread use as flocculants in several industries. In most cases, polymer adsorption is an essential prerequisite for flocculation and kinetic aspects are very important. The rates of polymer adsorption and of re-conformation (relaxation) of adsorbed chains are key factors that influence the performance of flocculants and their mode of action. Polyelectrolytes often tend to adopt a rather flat adsorbed configuration and in this state their action is mainly through charge effects, including 'electrostatic patch' attraction. When the relaxation rate is quite low, particle collisions may occur while the adsorbed chains are still in an extended state and flocculation by polymer bridging may occur. These effects are now well understood and supported by much experimental evidence. In recent years there has been considerable interest in the use of multi-component flocculants, especially dual-polymer systems. In the latter case, there can be significant advantages over the use of single polymers. Despite some complications, there is a broad understanding of the action of dual polymer systems. In many cases the sequence of addition of the polymers is important and the pre-adsorbed polymer can have two important effects: providing adsorption sites for the second polymer or causing a more extended adsorbed conformation as a result of 'site blocking'. Copyright © 2011 Elsevier B.V. All rights reserved.

Conformational dynamics of Peb4 exhibit "mother's arms" chain model: a molecular dynamics study.

PubMed

Dantu, Sarath Chandra; Khavnekar, Sagar; Kale, Avinash

2017-08-01

Peb4 from Campylobacter jejuni is an intertwined dimeric, periplasmic holdase, which also exhibits peptidyl prolyl cis/trans isomerase (PPIase) activity. Peb4 gene deletion alters the outer membrane protein profile and impairs cellular adhesion and biofilm formation for C. jejuni. Earlier crystallographic study has proposed that the PPIase domains are flexible and might form a cradle for holding the substrate and these aspects of Peb4 were explored using sub-microsecond molecular dynamics simulations in solution environment. Our simulations have revealed that PPIase domains are highly flexible and undergo a large structural change where they move apart from each other by 8 nm starting at .5 nm. Further, this large conformational change renders Peb4 as a compact protein with crossed-over conformation, forms a central cavity, which can "cradle" the target substrate. As reported for other chaperone proteins, flexibility of linker region connecting the chaperone and PPIase domains is key to forming the "crossed-over" conformation. The conformational transition of the Peb4 protein from the X-ray structure to the crossed-over conformation follows the "mother's arms" chain model proposed for the FkpA chaperone protein. Our results offer insights into how Peb4 and similar chaperones can use the conformational heterogeneity at their disposal to perform its much-revered biological function.

Streamlining environmental product declarations: a stage model

NASA Astrophysics Data System (ADS)

Lefebvre, Elisabeth; Lefebvre, Louis A.; Talbot, Stephane; Le Hen, Gael

2001-02-01

General public environmental awareness and education is increasing, therefore stimulating the demand for reliable, objective and comparable information about products' environmental performances. The recently published standard series ISO 14040 and ISO 14025 are normalizing the preparation of Environmental Product Declarations (EPDs) containing comprehensive information relevant to a product's environmental impact during its life cycle. So far, only a few environmentally leading manufacturing organizations have experimented the preparation of EPDs (mostly from Europe), demonstrating its great potential as a marketing weapon. However the preparation of EPDs is a complex process, requiring collection and analysis of massive amounts of information coming from disparate sources (suppliers, sub-contractors, etc.). In a foreseeable future, the streamlining of the EPD preparation process will require product manufacturers to adapt their information systems (ERP, MES, SCADA) in order to make them capable of gathering, and transmitting the appropriate environmental information. It also requires strong functional integration all along the product supply chain in order to ensure that all the information is made available in a standardized and timely manner. The goal of the present paper is two fold: first to propose a transitional model towards green supply chain management and EPD preparation; second to identify key technologies and methodologies allowing to streamline the EPD process and subsequently the transition toward sustainable product development

Effects of push-off ability and handcycle type on handcycling performance in able-bodied participants.

PubMed

Kouwijzer, Ingrid; Nooijen, Carla F J; Breukelen, Kees van; Janssen, Thomas W J; de Groot, Sonja

2018-05-14

To assess the effects on handcycling performance and physiological responses, of: (i) making a closed chain by comparing handcycling in a recumbent bike with 2-feet footrest (closed chain) with handcycling with 1 footrest (partial closed chain) and without a footrest (no closed chain); (ii) equipment by comparing handcycling in a recumbent bike with a kneeling bike. Ten able-bodied participants performed submaximal exercise and sprint tests, once in a knee-ling bike and 3 times on a recumbent: 2-feet support, 1-foot support and without foot support. Physical strain (submaximal oxygen uptake and heart rate), peak (POpeak) and mean power output (POmean) were measured. Significantly higher POpeak and POmean were found with 2-feet support (mean 415 W (standard deviation (SD) 163) and mean 281 W (SD 96)) and higher POmean with 1-foot support (mean 279 W (SD 104)) compared with no foot support (mean 332 W (SD 127) and mean 254 W (SD 101)), p < 0.05. No differences were found for physical strain. In the kneeling bike, POpeak and POmean were significantly higher (mean 628 W (SD 231) and 391 W (SD 121)) than in the recumbent (mean 415 W (SD 163) and 281 W (SD 96)), p = 0.001. The ability to make a closed chain has a significant positive effect on handcycling sprint performance; therefore, this ability may be a discriminating factor. Sprint performance was significantly higher in kneeling compared with recumbent handcycling.

Evaluating Opportunities to Improve Material and Energy Impacts in Commodity Supply Chains.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanes, Rebecca J.; Carpenter, Alberta

When evaluated at the process level, next-generation technologies may be more energy and emissions intensive than current technology. However, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Material Flows through Industry (MFI) scenario modeling tool. The MFI tool is a cradle-to-gate linear network model of the U.S. industrial sector that can model a wide range of manufacturing scenarios, including changes inmore » production technology, increases in industrial energy efficiency, and substitution between functionally equivalent materials. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing a steel supply chain to the supply chains of several functionally equivalent materials. Several of the alternatives to the baseline steel supply chain include next-generation production technologies and materials. Results of the case study show that aluminum production scenarios can out-perform the steel supply chain by using either an advanced smelting technology or an increased aluminum recycling rate. The next-generation material supply chains do not perform as well as either aluminum or steel, but may offer additional use phase reductions in energy and emissions that are outside the scope of the MFI tool. Future work will combine results from the MFI tool with a use phase analysis.« less

A protein-dependent side-chain rotamer library.

PubMed

Bhuyan, Md Shariful Islam; Gao, Xin

2011-12-14

Protein side-chain packing problem has remained one of the key open problems in bioinformatics. The three main components of protein side-chain prediction methods are a rotamer library, an energy function and a search algorithm. Rotamer libraries summarize the existing knowledge of the experimentally determined structures quantitatively. Depending on how much contextual information is encoded, there are backbone-independent rotamer libraries and backbone-dependent rotamer libraries. Backbone-independent libraries only encode sequential information, whereas backbone-dependent libraries encode both sequential and locally structural information. However, side-chain conformations are determined by spatially local information, rather than sequentially local information. Since in the side-chain prediction problem, the backbone structure is given, spatially local information should ideally be encoded into the rotamer libraries. In this paper, we propose a new type of backbone-dependent rotamer library, which encodes structural information of all the spatially neighboring residues. We call it protein-dependent rotamer libraries. Given any rotamer library and a protein backbone structure, we first model the protein structure as a Markov random field. Then the marginal distributions are estimated by the inference algorithms, without doing global optimization or search. The rotamers from the given library are then re-ranked and associated with the updated probabilities. Experimental results demonstrate that the proposed protein-dependent libraries significantly outperform the widely used backbone-dependent libraries in terms of the side-chain prediction accuracy and the rotamer ranking ability. Furthermore, without global optimization/search, the side-chain prediction power of the protein-dependent library is still comparable to the global-search-based side-chain prediction methods.

Animal health and price transmission along livestock supply chains.

PubMed

Aragrande, M; Canali, M

2017-04-01

Animal health diseases can severely affect the food supply chain by causing variations in prices and market demand. Price transmission analysis reveals in what ways price variations are transmitted along the supply chain, and how supply chains of substitute products and different regional markets are also affected. In perfect markets, a price variation would be completely and instantaneously transmitted across the different levels of the supply chain: producers, the processing industry, retailers and consumers. However, empirical studies show that food markets are often imperfect, with anomalies or asymmetries in price transmission and distortions in the distribution of market benefits. This means, for instance, that a price increase at the consumer level may not be transmitted from retailers to processors and producers; yet, on the other hand, price falls may rapidly affect the upstream supply chain. Market concentration and the consequent exertion of market power in key segments of the supply chain can explain price transmission asymmetries and their distributional effects, but other factors may also be involved, such as transaction costs, scale economies, and imperfect information. During the bovine spongiform encephalopathy (BSE) crisis, asymmetric price transmission in the beef supply chain and related meat markets determined distributional effects among sectors. After the spread of the BSE food scare, the fall in demand marginally affected the price paid to retailers, but producers and wholesalers suffered much more, in both price reductions and the time needed to recover to precrisis demand. Price transmission analysis investigates how animal health crises create different economic burdens for various types of stakeholder, and provides useful socioeconomic insights when used with other tools.

Current food safety management systems in fish-exporting companies require further improvements to adequately cope with contextual pressure: case study.

PubMed

Onjong, Hillary Adawo; Wangoh, John; Njage, Patrick Murigu Kamau

2014-10-01

Fish-processing plants still face food safety (FS) challenges worldwide despite the existence of several quality assurance standards and food safety management systems/s (FSMSs). This study assessed performance of FSMS in fish exporting sector considering pressure from the context in which they operate. A FSMS diagnostic tool with checklist was used to assess the context, FSMS, and FS output in 9 Kenyan fish exporting companies. Majority (67%) companies operated at moderate- to high-risk context but with an average performance in control and assurance activities. This situation could be insufficient to deal with ambiguity, uncertainty, and vulnerability issues in the context characteristics. Contextual risk posed by product characteristics (nature of raw materials) and chain environment characteristics was high. Risk posed by the chain environment characteristics, low power in supplier relationships, and low degree of authority in customer relationships was high. Lack of authority in relationship with suppliers would lead to high raw material risk situation. Even though cooling facilities, a key control activity, was at an advanced level, there was inadequate packaging intervention equipment which coupled with inadequate physical intervention equipment could lead to further weakened FSMS performance. For the fish companies to improve their FSMS to higher level and enhance predictability, they should base their FSMS on scientific information sources, historical results, and own experimental trials in their preventive, intervention, and monitoring systems. Specific suggestions are derived for improvements toward higher FSMS activity levels or lower risk levels in context characteristics. Weak areas in performance of control and assurance activities in export fish-processing sector already implementing current quality assurance guidelines and standards were studied taking into consideration contextual pressure wherein the companies operate. Important mitigation measures toward improved contextual risk, core assurance, and control activities irrespective of applied food safety management systems in fish industries were suggested. © 2014 Institute of Food Technologists®

Biophysical Interactions Control the Size and Abundance of Large Phytoplankton Chains at the Ushant Tidal Front

PubMed Central

Landeira, José M.; Ferron, Bruno; Lunven, Michel; Morin, Pascal; Marié, Louis; Sourisseau, Marc

2014-01-01

Phytoplankton blooms are usually dominated by chain-forming diatom species that can alter food pathways from primary producers to predators by reducing the interactions between intermediate trophic levels. The food-web modifications are determined by the length of the chains; however, the estimation is biased because traditional sampling strategies damage the chains and, therefore, change the phytoplankton size structure. Sedimentological studies around oceanic fronts have shown high concentrations of giant diatom mats (>1 cm in length), suggesting that the size of diatom chains is underestimated in the pelagic realm. Here, we investigate the variability in size and abundance of phytoplankton chains at the Ushant tidal front (NW France) using the Video Fluorescence Analyzer (VFA), a novel and non-invasive system. CTD and Scanfish profiling characterized a strong temperature and chlorophyll front, separating mixed coastal waters from the oceanic-stratified domain. In order to elucidate spring-neap variations in the front, vertical microstructure profiler was used to estimate the turbulence and vertical nitrate flux. Key findings were: (1) the VFA system recorded large diatom chains up to 10.7 mm in length; (2) chains were mainly distributed in the frontal region, with maximum values above the pycnocline in coincidence with the maximum chlorophyll; (3) the diapycnal fluxes of nitrate enabled the maintenance of the bloom in the frontal area throughout the spring-neap tidal cycle; (4) from spring to neap tide the chains length was significantly reduced; (5) during neap tide, the less intense vertical diffusion of nutrients, as well as the lower turbulence around the chains, intensified nutrient-depleted conditions and, thus, very large chains became disadvantageous. To explain this pattern, we suggest that size plasticity is an important ecological trait driving phytoplankton species competition. Although this plasticity behavior is well known from experiments in the laboratory, it has never been reported from observations in the field. PMID:24587384

Recovery and fine structure variability of RGII sub-domains in wine (Vitis vinifera Merlot)

PubMed Central

Buffetto, F.; Ropartz, D.; Zhang, X. J.; Gilbert, H. J.; Guillon, F.; Ralet, M.-C.

2014-01-01

Background and Aims Rhamnogalacturonan II (RGII) is a structurally complex pectic sub-domain composed of more than 12 different sugars and 20 different linkages distributed in five side chains along a homogalacturonan backbone. Although RGII has long been described as highly conserved over plant evolution, recent studies have revealed variations in the structure of the polysaccharide. This study examines the fine structure variability of RGII in wine, focusing on the side chains A and B obtained after sequential mild acid hydrolysis. Specifically, this study aims to differentiate intrinsic structural variations in these RGII side chains from structural variations due to acid hydrolysis. Methods RGII from wine (Vitis vinifera Merlot) was sequentially hydrolysed with trifluoroacetic acid (TFA) and the hydrolysis products were separated by anion-exchange chromatography (AEC). AEC fractions or total hydrolysates were analysed by MALDI-TOF mass spectrometry. Key Results The optimal conditions to recover non-degraded side chain B, side chain A and RGII backbone were 0·1 m TFA at 40 °C for 16 h, 0·48 m TFA at 40 °C for 16 h (or 0·1 m TFA at 60 °C for 8 h) and 0·1 m TFA at 60 °C for 16 h, respectively. Side chain B was particularly prone to acid degradation. Side chain A and the RGII GalA backbone were partly degraded by 0·1 m TFA at 80 °C for 1–4 h. AEC allowed separation of side chain B, methyl-esterified side chain A and non-methyl-esterified side chain A. The structure of side chain A and the GalA backbone were highly variable. Conclusions Several modifications to the RGII structure of wine were identified. The observed dearabinosylation and deacetylation were primarily the consequence of acidic treatment, while variation in methyl-esterification, methyl-ether linkages and oxidation reflect natural diversity. The physiological significance of this variability, however, remains to be determined. PMID:24908680

Regenerative Simulation of Harris Recurrent Markov Chains.

DTIC Science & Technology

1982-07-01

Sutijle) S. TYPE OF REPORT A PERIOD COVERED REGENERATIVE SIMULATION OF HARRIS RECURRENT Technical Report MARKOV CHAINS 14. PERFORMING ORG. REPORT NUMBER...7 AD-Ag 251 STANFORD UNIV CA DEPT OF OPERATIONS RESEARCH /s i2/ REGENERATIVE SIMULATION OF HARRIS RECURRENT MARKOV CHAINS,(U) JUL 82 P W GLYNN N0001...76-C-0578 UNtLASSIFIED TR-62 NL EhhhIhEEEEEEI EEEEEIIIIIII REGENERATIVE SIMULATION OF HARRIS RECURRENT MARKOV CHAINS by Peter W. Glynn TECHNICAL

Social learning by following: an analysis1

PubMed Central

Bullock, Daniel; Neuringer, Allen

1977-01-01

Learning by “following”, probably a common means by which behaviors are socially transmitted from adults to young in many species, was analyzed. Pigeons first learned to eat from a human hand. When the hand then approached an operant key and pecked it, the pigeons followed and quickly learned to do the same, thereby demonstrating social learning. When the hand only led the birds to the area of the key, without demonstrating the key-peck response, the birds learned as rapidly as with a key-peck demonstration. Birds also learned, but less reliably and more slowly, when they could observe the hand's responses but were constrained and unable to follow. “Following” was also shown to engender very rapid learning of a more complex, two-member response chain. PMID:16811970

CTEPP STANDARD OPERATING PROCEDURE FOR PROCESSING COMPLETED DATA FORMS (SOP-4.10)

EPA Science Inventory

This SOP describes the methods for processing completed data forms. Key components of the SOP include (1) field editing, (2) data form Chain-of-Custody, (3) data processing verification, (4) coding, (5) data entry, (6) programming checks, (7) preparation of data dictionaries, cod...

Cold chain food distribution from the Driftless Area : keys to attaining self-reliance in the circle city.

DOT National Transportation Integrated Search

2014-05-01

In recent years, small- to mid-scale farms have increasingly emphasized the importance of branding and establishing : the appropriate identity to enter the value-added market. Farms in the Driftless Area (mostly Southwest Wisconsin) are : slowly deve...

Institutional analysis of milkfish supply chain using interpretive structural modelling (ISM) (case study of UD. Bunda Foods, Sidoarjo District)

NASA Astrophysics Data System (ADS)

Silalahi, R. L. R.; Mustaniroh, S. A.; Ikasari, D. M.; Sriulina, R. P.

2018-03-01

UD. Bunda Foods is an SME located in the district of Sidoarjo. UD. Bunda Foods has problems of maintaining its milkfish’s quality assurance and developing marketing strategies. Improving those problems enables UD. Bunda Foods to compete with other similar SMEs and to market its product for further expansion of their business. The objectives of this study were to determine the model of the institutional structure of the milkfish supply chain, to determine the elements, the sub-elements, and the relationship among each element. The method used in this research was Interpretive Structural Modeling (ISM), involving 5 experts as respondents consisting of 1 practitioner, 1 academician, and 3 government organisation employees. The results showed that there were two key elements include requirement and goals elements. Based on the Drive Power-Dependence (DP-D) matrix, the key sub-elements of requirement element, consisted of raw material continuity, appropriate marketing strategy, and production capital, were positioned in the Linkage sector quadrant. The DP-D matrix for the key sub-elements of the goal element also showed a similar position. The findings suggested several managerial implications to be carried out by UD. Bunda Foods include establishing good relationships with all involved institutions, obtaining capital assistance, and attending the marketing training provided by the government.

A Case Study Using Modeling and Simulation to Predict Logistics Supply Chain Issues

NASA Technical Reports Server (NTRS)

Tucker, David A.

2007-01-01

Optimization of critical supply chains to deliver thousands of parts, materials, sub-assemblies, and vehicle structures as needed is vital to the success of the Constellation Program. Thorough analysis needs to be performed on the integrated supply chain processes to plan, source, make, deliver, and return critical items efficiently. Process modeling provides simulation technology-based, predictive solutions for supply chain problems which enable decision makers to reduce costs, accelerate cycle time and improve business performance. For example, United Space Alliance, LLC utilized this approach in late 2006 to build simulation models that recreated shuttle orbiter thruster failures and predicted the potential impact of thruster removals on logistics spare assets. The main objective was the early identification of possible problems in providing thruster spares for the remainder of the Shuttle Flight Manifest. After extensive analysis the model results were used to quantify potential problems and led to improvement actions in the supply chain. Similarly the proper modeling and analysis of Constellation parts, materials, operations, and information flows will help ensure the efficiency of the critical logistics supply chains and the overall success of the program.

Exploring Alkyl Chains in Benzobisthiazole-Naphthobisthiadiazole Polymers: Impact on Solar-Cell Performance, Crystalline Structures, and Optoelectronics.

PubMed

Al-Naamani, Eman; Gopal, Anesh; Ide, Marina; Osaka, Itaru; Saeki, Akinori

2017-11-01

The shapes and lengths of the alkyl chains of conjugated polymers greatly affect the efficiencies of organic photovoltaic devices. This often results in a trade-off between solubility and self-organizing behavior; however, each material has specific optimal chains. Here we report on the effect of alkyl side chains on the film morphologies, crystallinities, and optoelectronic properties of new benzobisthiazole-naphthobisthiadiazole (PBBT-NTz) polymers. The power conversion efficiencies (PCEs) of linear-branched and all-branched polymers range from 2.5% to 6.6%; the variations in these PCEs are investigated by atomic force microscopy, two-dimensional X-ray diffraction (2D-GIXRD), and transient photoconductivity techniques. The best-performing linear-branched polymer, bearing dodecyl and decyltetradecyl chains (C12-DT), exhibits nanometer-scale fibers along with the highest crystallinity, comprising predominant edge-on and partial face-on orientations. This morphology leads to the highest photoconductivity and the longest carrier lifetime. These results highlight the importance of long alkyl chains for inducing intermolecular stacking, which is in contrast to observations made for analogous previously reported polymers.

Mechanics and pathomechanics in the overhead athlete.

PubMed

Kibler, W Ben; Wilkes, Trevor; Sciascia, Aaron

2013-10-01

Optimal performance of the overhead throwing task requires precise mechanics that involve coordinated kinetic and kinematic chains to develop, transfer, and regulate the forces the body needs to withstand the inherent demands of the task and to allow optimal performance. These chains have been evaluated and the basic components, called nodes, have been identified. Impaired performance and/or injury, the DTS, is associated with alterations in the mechanics that are called pathomechanics. They can occur at multiple locations throughout the kinetic chain. They must be evaluated and treated as part of the overall problem. Observational analysis of the mechanics and pathomechanics using the node analysis method can be useful in highlighting areas of alteration that can be evaluated for anatomic injury or altered physiology. The comprehensive kinetic chain examination can evaluate sites of kinetic chain breakage, and a detailed shoulder examination can assess joint internal derangement of altered physiology that may contribute to the pathomechanics. Treatment of the DTS should be comprehensive, directed toward restoring physiology and mechanics and optimizing anatomy. This maximizes the body’s ability to develop normal mechanics to accomplish the overhead throwing task. Copyright © 2013 Elsevier Inc. All rights reserved.

Shareholder value and the performance of a large nursing home chain.

PubMed

Kitchener, Martin; O'Meara, Janis; Brody, Ab; Lee, Hyang Yuol; Harrington, Charlene

2008-06-01

To analyze corporate governance arrangements and quality and financial performance outcomes among large multi-facility nursing home corporations (chains) that pursue stakeholder value (profit maximization) strategies. To establish a foundation of knowledge about the focal phenomenon and processes, we conducted an historical (1993-2005) case study of one of the largest chains (Sun Healthcare Inc.) that triangulated qualitative and quantitative data sources. Two main sets of information were compared: (1) corporate sources including Sun's Security Exchange Commission (SEC) Form 10-K annual reports, industry financial reports, and the business press; and (2) external sources including, legal documents, press reports, and publicly available California facility cost reports and quality data. Shareholder value was pursued at Sun through three inter-linked strategies: (1) rapid growth through debt-financed mergers; (2) labor cost constraint through low nurse staffing levels; and (3) a model of corporate governance that views sanctions for fraud and poor quality as a cost of business. Study findings and evidence from other large nursing home chains underscore calls from the Institute of Medicine and other bodies for extended oversight of the corporate governance and performance of large nursing home chains.

Shareholder Value and the Performance of a Large Nursing Home Chain

PubMed Central

Kitchener, Martin; O'Meara, Janis; Brody, Ab; Lee, Hyang Yuol; Harrington, Charlene

2008-01-01

Objective To analyze corporate governance arrangements and quality and financial performance outcomes among large multi-facility nursing home corporations (chains) that pursue stakeholder value (profit maximization) strategies. Study Design To establish a foundation of knowledge about the focal phenomenon and processes, we conducted an historical (1993–2005) case study of one of the largest chains (Sun Helathcare Inc.) that triangulated qualitative and quantitative data sources. Data Sources Two main sets of information were compared: (1) corporate sources including Sun's Security Exchange Commission (SEC) Form 10-K annual reports, industry financial reports, and the business press; and (2) external sources including, legal documents, press reports, and publicly available California facility cost reports and quality data. Principal Findings Shareholder value was pursued at Sun through three inter-linked strategies: (1) rapid growth through debt-financed mergers; (2) labor cost constraint through low nurse staffing levels; and (3) a model of corporate governance that views sanctions for fraud and poor quality as a cost of business. Conclusions Study findings and evidence from other large nursing home chains underscore calls from the Institute of Medicine and other bodies for extended oversight of the corporate governance and performance of large nursing home chains. PMID:18454781

Measuring Fission Chain Dynamics Through Inter-event Timing of Correlated Particles

NASA Astrophysics Data System (ADS)

Monterial, Mateusz

Neutrons born from fission may go on to induce subsequent fissions in self-propagating series of reactions resulting in a fission chain. Fissile materials comprise all isotopes capable of sustaining nuclear fission chain reactions, and are therefore a necessary prerequisite for the construction of a nuclear weapon. As a result the accountancy and characterization of fissile material is of great importance for national security and the international community. The rate at which neutrons "multiply" in a fissile material is a function of the composition, total mass, density, and shape of the object. These are key characteristics sought out in areas of nuclear non-proliferation, safeguards, treaty verification and emergency response. This thesis demonstrates a novel technique of measuring the underlying fission chain dynamics in fissile material through temporal correlation of neutrons and gamma rays emitted from fission. Fissile material exhibits key detectable signatures through the emission of correlated neutrons and gamma rays from fission. The Non-Destructive Assay (NDA) community has developed mature techniques of assaying fissile material that detect these signatures, such as neutron counting by thermal capture based detectors, and gamma-ray spectroscopy. An alternative use of fast organic scintillators provides three additional capabilities: (1) discrimination between neutrons and gamma-ray pulses (2) sub-nanosecond scale timing between correlated events (3) measurement of deposited neutron energy in the detector. This thesis leverages these capabilities into to measure a new signature, which is demonstrated to be sensitive to both fissile neutron multiplication and presence of neutronically coupled reflectors. In addition, a new 3D imaging method of sources of correlated gamma rays and neutrons is presented, which can improve estimation of total source volume and localization.

Roles of pyruvate dehydrogenase and branched-chain α-keto acid dehydrogenase in branched-chain membrane fatty acid levels and associated functions in Staphylococcus aureus.

PubMed

Singh, Vineet K; Sirobhushanam, Sirisha; Ring, Robert P; Singh, Saumya; Gatto, Craig; Wilkinson, Brian J

2018-04-01

Membrane fluidity to a large extent is governed by the presence of branched-chain fatty acids (BCFAs). Branched-chain α-keto acid dehydrogenase (BKD) is the key enzyme in BCFA synthesis. A Staphylococcus aureus BKD-deficient strain still produced substantial levels of BCFAs. Pyruvate dehydrogenase (PDH) with structural similarity to BKD has been speculated to contribute to BCFAs in S. aureus. This study was carried out using BKD-, PDH- and BKD : PDH-deficient derivatives of methicillin-resistant S. aureus strain JE2. Differences in growth kinetics were evaluated spectrophotometrically, membrane BCFAs using gas chromatography and membrane fluidity by fluorescence polarization. Carotenoid levels were estimated by measuring A465 of methanol extracts from 48 h cultures. MIC values were determined by broth microdilution.Results/Key findings. BCFAs made up 50 % of membrane fatty acids in wild-type but only 31 % in the BKD-deficient mutant. BCFA level was ~80 % in the PDH-deficient strain and 38 % in the BKD : PDH-deficient strain. BKD-deficient mutant showed decreased membrane fluidity, the PDH-deficient mutant showed increased membrane fluidity. The BKD- and PDH-deficient strains grew slower and the BKD : PDH-deficient strain grew slowest at 37 °C. However at 20 °C, the BKD- and BKD : PDH-deficient strains grew only a little followed by autolysis of these cells. The BKD-deficient strain produced higher levels of staphyloxanthin. The PDH-deficient and BKD : PDH-deficient strains produced very little staphyloxanthin. The BKD-deficient strain showed increased susceptibility to daptomycin. The BCFA composition of the cell membrane in S. aureus seems to significantly impact cell growth, membrane fluidity and resistance to daptomycin.

Energy balance for uranium recovery from seawater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schneider, E.; Lindner, H.

The energy return on investment (EROI) of an energy resource is the ratio of the energy it ultimately produces to the energy used to recover it. EROI is a key viability measure for a new recovery technology, particularly in its early stages of development when financial cost assessment would be premature or highly uncertain. This paper estimates the EROI of uranium recovery from seawater via a braid adsorbent technology. In this paper, the energy cost of obtaining uranium from seawater is assessed by breaking the production chain into three processes: adsorbent production, adsorbent deployment and mooring, and uranium elution andmore » purification. Both direct and embodied energy inputs are considered. Direct energy is the energy used by the processes themselves, while embodied energy is used to fabricate their material, equipment or chemical inputs. If the uranium is used in a once-through fuel cycle, the braid adsorbent technology EROI ranges from 12 to 27, depending on still-uncertain performance and system design parameters. It is highly sensitive to the adsorbent capacity in grams of U captured per kg of adsorbent as well as to potential economies in chemical use. This compares to an EROI of ca. 300 for contemporary terrestrial mining. It is important to note that these figures only consider the mineral extraction step in the fuel cycle. At a reference performance level of 2.76 g U recovered per kg adsorbent immersed, the largest energy consumers are the chemicals used in adsorbent production (63%), anchor chain mooring system fabrication and operations (17%), and unit processes in the adsorbent production step (12%). (authors)« less

Assessing stability and performance of a digitally enabled supply chain: Retrospective of a pilot in Uttar Pradesh, India.

PubMed

Gilbert, Sarah Skye; Thakare, Neeraj; Ramanujapuram, Arun; Akkihal, Anup

2017-04-19

Immunization supply chains in low resource settings do not always reach children with necessary vaccines. Digital information systems can enable real time visibility of inventory and improve vaccine availability. In 2014, a digital, mobile/web-based information system was implemented in two districts of Uttar Pradesh, India. This retrospective investigates improvements and stabilization of supply chain performance following introduction of the digital information system. All data were collected via the digital information system between March 2014 and September 2015. Data included metadata and transaction logs providing information about users, facilities, and vaccines. Metrics evaluated include adoption (system access, timeliness and completeness), data quality (error rates), and performance (stock availability on immunization session days, replenishment response duration, rate of zero stock events). Stability was defined as the phase in which quality and performance metrics achieved equilibrium rates with minimal volatility. The analysis compared performance across different facilities and vaccines. Adoption appeared sufficiently high from the onset to commence stability measures of data quality and supply chain performance. Data quality stabilized from month 3 onwards, and supply chain performance stabilized from month 13 onwards. For data quality, error rates reduced by two thirds post stabilization. Although vaccine availability remained high throughout the pilot, the three lowest-performing facilities improved from 91.05% pre-stability to 98.70% post-stability (p<0.01; t-test). Average replenishment duration (as a corrective response to stock-out events) decreased 52.3% from 4.93days to 2.35days (p<0.01; t-test). Diphtheria-tetanus-pertussis vaccine was significantly less likely to be stocked out than any other material. The results suggest that given sufficient adoption, stability is sequentially achieved, beginning with data quality, and then performance. Identifying when a pilot stabilizes can enable more predictable, reliable cost estimates, and outcome forecasts in the scale-up phase. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Physician executives straddle the digital divide.

PubMed

Coile, R C

2001-01-01

e-Health is here to stay and experts predict that the Internet will become the hub of health care. Rapid advancements in biotechnology and medical research, increasingly curious patients who surf the Internet for medical information, and pressures from managed care companies to contain costs and speed treatments are the central components driving e-health. Despite physician reluctance to embrace the e-revolution, many hospitals and medical groups are employing the Internet and information technology to improve their customer interface, as well as to reduce business costs. This article offers seven e-strategies for health care performance improvement: (1) Supply chain management; (2) e-transactions; (3) care management; (4) improving quality; (5) boosting revenues; (6) outsourcing; and (7) provider networks (Intranets). By helping to incorporate these key e-solutions, physician executives can position their organizations for success in the new millennium.

Reducing Weight for Transportation Applications: Technology Challenges and Opportunities

NASA Astrophysics Data System (ADS)

Taub, Alan I.

Today's land, sea and air transportation industries — as a business necessity — are focused on technology solutions that will make vehicles more sustainable in terms of energy, the environment, safety and affordability. Reducing vehicle weight is a key enabler for meeting these challenges as well as increasing payload and improving performance. The potential weight reductions from substituting lightweight metals (advanced high-strength steels, aluminum, magnesium and titanium alloys) are well established. For magnesium castings, weight savings of 60% have been reported [1]. The value of weight reduction depends on the transportation sector and ranges from about 5/kg saved for automobiles to over 500/kg saved for aircraft [2]. The challenge is to optimize the material properties and develop robust, high volume, manufacturing technologies and the associated supply chain to fabricate components and subsystems at the appropriate cost for each application.

Fuel cells are a commercially viable alternative for the production of "clean" energy.

PubMed

Niakolas, Dimitris K; Daletou, Maria; Neophytides, Stylianos G; Vayenas, Constantinos G

2016-01-01

Fuel cells present a highly efficient and environmentally friendly alternative technology for decentralized energy production. The scope of the present study is to provide an overview of the technological and commercialization readiness level of fuel cells. Specifically, there is a brief description of their general advantages and weaknesses in correlation with various technological actions and political strategies, which are adopted towards their proper positioning in the global market. Some of the most important key performance indicators are also discussed, alongside with a few examples of broad commercialization. It is concluded that the increasing number of companies which utilize and invest on this technology, in combination with the supply chain improvements and the concomitant technological maturity and recognition, reinforce the fuel cell industry so as to become well-aligned for global success.

Spatial data analytics on heterogeneous multi- and many-core parallel architectures using python

USGS Publications Warehouse

Laura, Jason R.; Rey, Sergio J.

2017-01-01

Parallel vector spatial analysis concerns the application of parallel computational methods to facilitate vector-based spatial analysis. The history of parallel computation in spatial analysis is reviewed, and this work is placed into the broader context of high-performance computing (HPC) and parallelization research. The rise of cyber infrastructure and its manifestation in spatial analysis as CyberGIScience is seen as a main driver of renewed interest in parallel computation in the spatial sciences. Key problems in spatial analysis that have been the focus of parallel computing are covered. Chief among these are spatial optimization problems, computational geometric problems including polygonization and spatial contiguity detection, the use of Monte Carlo Markov chain simulation in spatial statistics, and parallel implementations of spatial econometric methods. Future directions for research on parallelization in computational spatial analysis are outlined.

Debriefing of the medical team after emergencies on cruise ships.

PubMed

Dahl, Eilif

2017-01-01

Done to improve safety and patient outcome but not to lay blame, debriefings on cruise ships should preferably be conducted as standard practice in the medical facility immediately after all critical events aboard. The key questions to be asked are: What went well, what could have gone better and what must participants do to improve care? Post-debriefing the ship's doctor might have to deal with team members' mental stress resulting both from the event and from debriefing it. Required by most cruise companies, standardised advanced life support courses teach effective high-performance team dynamics. They provide the multinational medical staff with a clearer understanding of the rescue sequence, which again will reduce the risk of mistakes and simplify post-event debriefings. Their systematic approach to the chain of survival is also helpful for post-event debriefings if something went wrong.

Snap-through instability analysis of dielectric elastomers with consideration of chain entanglements

NASA Astrophysics Data System (ADS)

Zhu, Jiakun; Luo, Jun; Xiao, Zhongmin

2018-06-01

It is widely recognized that the extension limit of polymer chains has a significant effect on the snap-through instability of dielectric elastomers (DEs). The snap-through instability performance of DEs has been extensively studied by two limited-stretch models, i.e., the eight-chain model and Gent model. However, the real polymer networks usually have many entanglements due to the impenetrability of the network chains as well as a finite extensibility resulting from the full stretching of the polymer chains. The effects of entanglements on the snap-through instability of DEs cannot be captured by the previous two limited-stretch models. In this paper, the nonaffine model proposed by Davidson and Goulbourne is adopted to characterize the influence of entanglements and extension limit of the polymer chains. It is demonstrated that the nonaffine model is almost identical to the eight-chain model and is close to the Gent model if we ignore the effects of chain entanglements and adopt the affine assumption. The suitability of the nonaffine model to characterize the mechanical behavior of elastomers is validated by fitting the experimental results reported in the open literature. After that, the snap-through stability performance of an ideal DE membrane under equal-biaxial prestretches is studied with the nonaffine model. It is revealed that besides the prestretch and chain extension limit, the chain entanglements can markedly influence the snap-through instability and the path to failure of DEs. These results provide a more comprehensive understanding on the snap-through instability of a DE and may be helpful to guide the design of DE devices.

Analysis of Business Process at PT XYZ by Using SCOR Thread Diagram

NASA Astrophysics Data System (ADS)

Sembiring, M. T.; Rambe, H. C.

2017-03-01

Supply Chain Operations Reference (SCOR) is a standard supply chain performance evaluation model which is proposed by Supply Chain Council (SCC). SCOR makes companies can analyse and evaluate their supply chain performance. SCOR has Thread Diagram which describes business process simply and systematically to help the analysis of company’s business process. This research takes place in PT XYZ that is involved in Crude Palm Oil (CPO) industry. PT XYZ used to be the market leader of CPO industry but nowadays they have a trouble to compete with new competitors. The purpose of this study is to provide the input for PT XYZ business process improvement to enhance the competitiveness of the company with the others. The result obtained shows that there are two performance metrics that are not reached. The analysis of business process shows the lack of control role of PT XYZ to supplier and customer side which is going to be the suggestion of improvement.

Essays on the Effect of Radio Frequency Identification (RFID) on the Management of Healthcare Supply Chain Performance

ERIC Educational Resources Information Center

Cakici, Ozden Engin

2012-01-01

This dissertation examines three issues on the effect of Radio Frequency Identification (RFID) on the management of healthcare supply chain performance within the context of inventory management. Motivated by a case study conducted in a radiology practice, the second chapter analyzes the incremental benefits of RFID over barcodes for managing…

Retail sector distribution chains for malaria treatment in the developing world: a review of the literature.

PubMed

Patouillard, Edith; Hanson, Kara G; Goodman, Catherine A

2010-02-11

In many low-income countries, the retail sector plays an important role in the treatment of malaria and is increasingly being considered as a channel for improving medicine availability. Retailers are the last link in a distribution chain and their supply sources are likely to have an important influence on the availability, quality and price of malaria treatment. This article presents the findings of a systematic literature review on the retail sector distribution chain for malaria treatment in low and middle-income countries. Publication databases were searched using key terms relevant to the distribution chain serving all types of anti-malarial retailers. Organizations involved in malaria treatment and distribution chain related activities were contacted to identify unpublished studies. A total of 32 references distributed across 12 developing countries were identified. The distribution chain had a pyramid shape with numerous suppliers at the bottom and fewer at the top. The chain supplying rural and less-formal outlets was made of more levels than that serving urban and more formal outlets. Wholesale markets tended to be relatively concentrated, especially at the top of the chain where few importers accounted for most of the anti-malarial volumes sold. Wholesale price mark-ups varied across chain levels, ranging from 27% to 99% at the top of the chain, 8% at intermediate level (one study only) and 2% to 67% at the level supplying retailers directly. Retail mark-ups tended to be higher, and varied across outlet types, ranging from 3% to 566% in pharmacies, 29% to 669% in drug shops and 100% to 233% in general shops. Information on pricing determinants was very limited. Evidence on the distribution chain for retail sector malaria treatment was mainly descriptive and lacked representative data on a national scale. These are important limitations in the advent of the Affordable Medicine Facility for Malaria, which aims to increase consumer access to artemisinin-based combination therapy (ACT), through a subsidy introduced at the top of the distribution chain. This review calls for rigorous distribution chain analysis, notably on the factors that influence ACT availability and prices in order to contribute to efforts towards improved access to effective malaria treatment.

A facile method to synthesize boron-doped Ni/Fe alloy nano-chains as electrocatalyst for water oxidation

NASA Astrophysics Data System (ADS)

Yang, Yisu; Zhuang, Linzhou; Lin, Rijia; Li, Mengran; Xu, Xiaoyong; Rufford, Thomas E.; Zhu, Zhonghua

2017-05-01

We report a novel magnetic field assisted chemical reduction method for the synthesis of boron-doped Ni/Fe nano-chains as promising catalysts for the oxygen evolution reaction (OER). The boron-doped Ni/Fe nano-chains were synthesised in a one step process at room temperature using NaBH4 as a reducing agent. The addition of boron reduced the magnetic moment of the intermediate synthesis products and produced nano-chains with a high specific surface area of 73.4 m2 g-1. The boron-doped Ni/Fe nano-chains exhibited catalytic performance superior to state-of-the-art Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite and RuO2 noble metal oxide catalysts. The mass normalized activity of the boron-doped Ni/Fe nano-chains measured at an overpotential of 0.35 V was 64.0 A g-1, with a Tafel slope of only 40 mV dec-1. The excellent performance of the boron-doped Ni/Fe nano-chains can be attributed to the uniform elemental distribution and highly amorphous structure of the B-doped nano-chains. These results provide new insights into the effect of doping transition-metal based OER catalysts with non-metallic elements. The study demonstrates a facile approach to prepare transition metal nano-chains using magnetic field assisted chemical reduction method as cheap and highly active catalysts for electrochemical water oxidation.

Stretching of a polymer chain anchored to a surface: the massive field theory approach

NASA Astrophysics Data System (ADS)

Usatenko, Zoryana

2014-09-01

Taking into account the well-known correspondence between the field theoretical φ4 O(n)-vector model in the limit n → 0 and the behaviour of long-flexible polymer chains, the investigation of stretching of an ideal and a real polymer chain with excluded volume interactions in a good solvent anchored to repulsive and inert surfaces is performed. The calculations of the average stretching force which arises when the free end of a polymer chain moves away from a repulsive or inert surface are performed up to one-loop order of the massive field theory approach in fixed space dimensions d = 3. The analysis of the obtained results indicates that the average stretching force for a real polymer chain anchored to a repulsive surface demonstrates different behaviour for the cases \\tilde{z}\\ll1 and \\tilde{z}\\gg1 , where \\tilde{z}=z^\\prime/Rz . Besides, the results obtained in the framework of the massive field theory approach are in good agreement with previous theoretical results for an ideal polymer chain and results of a density functional theory approach for the region of small applied forces when deformation of a polymer chain in the direction of the applied force is not bigger than the linear extension of a polymer chain in this direction. The better agreement between these two methods is observed in the case where the number of monomers increases and the polymer chain becomes longer.

Design and Synthesis of Waterborne Polyurethanes.

PubMed

Kang, Soo-Young; Ji, Zhaoxia; Tseng, Ling-Fang; Turner, Sara A; Villanueva, Dinara A; Johnson, Rhiannon; Albano, Ariana; Langer, Robert

2018-05-01

Waterborne polyurethanes (WBPUs) have attracted increasing attention in a wide range of industrial applications because of their versatile properties as well as ecofriendly nature. Although extensive research has been carried out on WBPU synthesis, the roles of some of the key synthesis components remain unclear. In this study, through systematically controlling and fine tuning the precursor compositions and reaction conditions, over 300 WBPUs are synthesized. This research enables the roles of several key components that govern WBPU physicochemical properties and ultimately the potential WBPU applications to be identified. Using hair styling as an example, it is demonstrated that only the WBPUs with an optimal range of properties (e.g., Young's modulus >150 MPa, elongation at break: 15-300%, moisture uptake <10%) can achieve strong styling performance. To further improve the natural-feel sensory benefits in the final styling products, a number of fatty acids with different carbon chain lengths or unsaturation levels are incorporated into WBPUs. Among the ten fatty acids studied, linoleic acid is identified as the most preferred additive. Both in vitro and in vivo testing demonstrate that WBPUs with optimal properties are promising materials for developing strong, long-lasting styling products with natural feel. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

NGNP Infrastructure Readiness Assessment: Consolidation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brian K Castle

2011-02-01

The Next Generation Nuclear Plant (NGNP) project supports the development, demonstration, and deployment of high temperature gas-cooled reactors (HTGRs). The NGNP project is being reviewed by the Nuclear Energy Advisory Council (NEAC) to provide input to the DOE, who will make a recommendation to the Secretary of Energy, whether or not to continue with Phase 2 of the NGNP project. The NEAC review will be based on, in part, the infrastructure readiness assessment, which is an assessment of industry's current ability to provide specified components for the FOAK NGNP, meet quality assurance requirements, transport components, have the necessary workforce inmore » place, and have the necessary construction capabilities. AREVA and Westinghouse were contracted to perform independent assessments of industry's capabilities because of their experience with nuclear supply chains, which is a result of their experiences with the EPR and AP-1000 reactors. Both vendors produced infrastructure readiness assessment reports that identified key components and categorized these components into three groups based on their ability to be deployed in the FOAK plant. The NGNP project has several programs that are developing key components and capabilities. For these components, the NGNP project have provided input to properly assess the infrastructure readiness for these components.« less

Analyzing Arabidopsis thaliana root proteome provides insights into the molecular bases of enantioselective imazethapyr toxicity

PubMed Central

Qian, Haifeng; Lu, Haiping; Ding, Haiyan; Lavoie, Michel; Li, Yali; Liu, Weiping; Fu, Zhengwei

2015-01-01

Imazethapyr (IM) is a widely used chiral herbicide that inhibits the synthesis of branched-chain amino acids (BCAAs). IM is thought to exert its toxic effects on amino acid synthesis mainly through inhibition of acetolactate synthase activity, but little is known about the potential effects of IM on other key biochemical pathways. Here, we exposed the model plant Arabidospsis thaliana to trace S- and R-IM enantiomer concentrations and examined IM toxicity effects on the root proteome using iTRAQ. Conventional analyses of root carbohydrates, organic acids, and enzyme activities were also performed. We discovered several previously unknown key biochemical pathways targeted by IM in Arabidospsis. 1,322 and 987 proteins were differentially expressed in response to R- and S-IM treatments, respectively. Bioinformatics and physiological analyses suggested that IM reduced the BCAA tissue content not only by strongly suppressing BCAA synthesis but also by increasing BCAA catabolism. IM also affected sugar and starch metabolism, changed the composition of root cell walls, increased citrate production and exudation, and affected the microbial community structure of the rhizosphere. The present study shed new light on the multiple toxicity mechanisms of a selective herbicide on a model plant. PMID:26153126

Analyzing Arabidopsis thaliana root proteome provides insights into the molecular bases of enantioselective imazethapyr toxicity

NASA Astrophysics Data System (ADS)

Qian, Haifeng; Lu, Haiping; Ding, Haiyan; Lavoie, Michel; Li, Yali; Liu, Weiping; Fu, Zhengwei

2015-07-01

Imazethapyr (IM) is a widely used chiral herbicide that inhibits the synthesis of branched-chain amino acids (BCAAs). IM is thought to exert its toxic effects on amino acid synthesis mainly through inhibition of acetolactate synthase activity, but little is known about the potential effects of IM on other key biochemical pathways. Here, we exposed the model plant Arabidospsis thaliana to trace S- and R-IM enantiomer concentrations and examined IM toxicity effects on the root proteome using iTRAQ. Conventional analyses of root carbohydrates, organic acids, and enzyme activities were also performed. We discovered several previously unknown key biochemical pathways targeted by IM in Arabidospsis. 1,322 and 987 proteins were differentially expressed in response to R- and S-IM treatments, respectively. Bioinformatics and physiological analyses suggested that IM reduced the BCAA tissue content not only by strongly suppressing BCAA synthesis but also by increasing BCAA catabolism. IM also affected sugar and starch metabolism, changed the composition of root cell walls, increased citrate production and exudation, and affected the microbial community structure of the rhizosphere. The present study shed new light on the multiple toxicity mechanisms of a selective herbicide on a model plant.

Phenolic Polymer Solvation in Water and Ethylene Glycol, I: Molecular Dynamics Simulations

NASA Technical Reports Server (NTRS)

Bucholz, Eric W.; Haskins, Justin B.; Monk, Joshua D.; Bauschlicher, Charles W.; Lawson, John W.

2017-01-01

Interactions between pre-cured phenolic polymer chains and a solvent have a significant impact on the structure and properties of the final post-cured phenolic resin. Developing an understanding of the nature of these interactions is important and will aid in the selection of the proper solvent that will lead to the desired final product. Here, we investigate the role of phenolic chain structure and solvent type on the overall solvation performance of the system through molecular dynamics simulations. Two types of solvents are considered, ethylene glycol (EGL) and H2O. In addition, three phenolic chain structures were considered including two novolac-type chains with either an ortho-ortho (OON) or ortho-para (OPN) backbone network and a resole-type (RES) chain with an ortho-ortho network. Each system is characterized through structural analysis of the solvation shell and hydrogen bonding environment as well as through quantification of the solvation free energy along with partitioned interaction energies between specific molecular species. The combination of the simulations and analyses indicate that EGL provides a larger solvation free energy than H2O due to more energetically favorable hydrophilic interactions as well as favorable hydrophobic interactions between CH element groups. In addition, phenolic chain structure significantly impacts solvation performance with OON having limited intermolecular hydrogen bond formations while OPN and RES interact more favorably with the solvent molecules. The results suggest that a resole-type phenolic chain with an ortho-para network should have the best solvation performance in EGL, H2O, and other similar solvents.

Phenolic Polymer Solvation in Water and Ethylene Glycol, I: Molecular Dynamics Simulations.

PubMed

Bucholz, Eric W; Haskins, Justin B; Monk, Joshua D; Bauschlicher, Charles W; Lawson, John W

2017-04-06

Interactions between pre-cured phenolic polymer chains and a solvent have a significant impact on the structure and properties of the final postcured phenolic resin. Developing an understanding of the nature of these interactions is important and will aid in the selection of the proper solvent that will lead to the desired final product. Here, we investigate the role of the phenolic chain structure and the solvent type on the overall solvation performance of the system through molecular dynamics simulations. Two types of solvents are considered: ethylene glycol (EGL) and H 2 O. In addition, three phenolic chain structures are considered, including two novolac-type chains with either an ortho-ortho (OON) or an ortho-para (OPN) backbone network and a resole-type (RES) chain with an ortho-ortho network. Each system is characterized through a structural analysis of the solvation shell and the hydrogen-bonding environment as well as through a quantification of the solvation free energy along with partitioned interaction energies between specific molecular species. The combination of simulations and the analyses indicate that EGL provides a higher solvation free energy than H 2 O due to more energetically favorable hydrophilic interactions as well as favorable hydrophobic interactions between CH element groups. In addition, the phenolic chain structure significantly affects the solvation performance, with OON having limited intermolecular hydrogen-bond formations, while OPN and RES interact more favorably with the solvent molecules. The results suggest that a resole-type phenolic chain with an ortho-para network should have the best solvation performance in EGL, H 2 O, and other similar solvents.

Facing the rain after the phase out: Performance evaluation of alternative fluorinated and non-fluorinated durable water repellents for outdoor fabrics.

PubMed

Schellenberger, S; Gillgard, P; Stare, A; Hanning, A; Levenstam, O; Roos, S; Cousins, I T

2018-02-01

Fluorinated durable water repellent (DWR) agents are used to obtain water and stain repellent textiles. Due to the on-going phase-out of DWRs based on side-chain fluorinated polymers (SFP) with "long" perfluoroalkyl chains, the textile industry lacks suitable alternatives with comparable material characteristics. The constant development and optimization of SFPs for textile applications initiated more than half a century ago has resulted in a robust and very efficient DWR-technology and textiles with exceptional hydro- and oleo-phobic properties. The industry is now in the predicament that the long-chain SFPs with the best technical performance have undesirable toxicological and environmental behaviour. This study provides a comprehensive overview of the technical performance of presently available fluorinated and non-fluorinated DWRs as part of a chemical alternatives assessment (CAA). The results are based on a study with synthetic outdoor fabrics treated with alternative DWRs and tested for repellency using industrial standard and complementary methods. Using this approach, the complex structure-property relationships of DWR-polymers could be explained on a molecular level. Both short-chain SFPs and non-fluorinated DWRs showed excellent water repellency and durability in some cases while short-chain SFPs were the more robust of the alternatives to long-chain SFPs. A strong decline in oil repellency and durability with perfluoroalkyl chain length was shown for SFP DWRs. Non-fluorinated alternatives were unable to repel oil, which might limit their potential for substitution in textile application that require repellency towards non-polar liquids. Copyright © 2017. Published by Elsevier Ltd.

Building green supply chains in eco-industrial parks towards a green economy: Barriers and strategies.

PubMed

Li, Jacqueline; Pan, Shu-Yuan; Kim, Hyunook; Linn, Jean H; Chiang, Pen-Chi

2015-10-01

As suggested by UNEP, the key to sustainable development is to create a "green economy" which should encapsulate all three sectors: the industry, the people, and the government. Therefore, there is an urgent need to develop and implement the green technologies into the existing facilities, especially in the developing countries. In this study, the role of green supply chains in eco-industrial parks (EIPs) towards a green economy was investigated. The strategies and effective evaluation procedures of the green economy were proposed by assessing the barriers from the perspective of institution, regulation, technology, and finance. In addition, three case studies from iron and steel-making, paper mill and pulping, and petrochemical industries were presented and illustrated for building the green supply chains. For example, in the case of Lin-Hai Industrial Park, a total of 15 efficient green supply chains using waste-to-resources technologies were established by 2012, resulting in an economic benefit of USD 100 million per year. It suggests that the green supply chains should be established to achieve both economic growth and environmental protection. With these successful experiences, building a green supply chain within industrial park should be extensively promoted to make traditional industries around the world being environmentally bearable, economic viable, and social equitable. Copyright © 2015 Elsevier Ltd. All rights reserved.

System redesign of the immunization supply chain: Experiences from Benin and Mozambique.

PubMed

Prosser, Wendy; Jaillard, Philippe; Assy, Emmanuelle; Brown, Shawn T; Matsinhe, Graça; Dekoun, Mawutondji; Lee, Bruce Y

2017-04-19

Evidence suggests that immunization supply chains are becoming outdated and unable to deliver needed vaccines due to growing populations and new vaccine introductions. Redesigning a supply chain could result in meeting current demands. The Ministries of Health in Benin in Mozambique recognized known barriers to the immunization supply chain and undertook a system redesign to address those barriers. Changes were made to introduce an informed push system while consolidating storage points, introducing transport loops, and increasing human resource capacity for distribution. Evaluations were completed in each country. Evaluation in each country indicated improved performance of the supply chain. The Effective Vaccine Management (EVM) assessment in Benin documented notable improvements in the distribution criteria of the tool, increasing from 40% to 100% at the district level. In Mozambique, results showed reduced stockouts at health facility level from 79% at baseline to less than 1% at endline. Coverage rates of DTP3 also increased from 68.9% to 92.8%. Benin and Mozambique are undertaking system redesign in order to respond to constraints identified in the vaccine supply chain. Results and learnings show improvements in supply chain performance and make a strong case for system redesign. These countries demonstrate the feasibility of system redesign for other countries considering how to address outdated supply chains. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Mercury in Tadpoles Collected from Remote Alpine Sites in the Southern Sierra Nevada Mountains, California, USA

EPA Science Inventory

Amphibians in alpine wetlands of the Sierra Nevada mountains comprise key components of an aquatic-terrestrial food chain, and mercury contamination is a concern because concentrations in fish from this regin exceed thresholds of risk to piscivorous wildlife. Total mercury conc...

Technical efficiency gains from port reform : the potential for yardstick competition in Mexico

DOT National Transportation Integrated Search

2001-07-17

Ports are one of the key components of the logistics chain and, this is why the desire to cut costs in the sector is becoming a mainstream component of most transport policy reforms. The most common instrument relied on is the introduction of some ty...

12 CFR 740.5 - Requirements for the official advertising statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... statement until the supplies are exhausted. (b) The official advertising statement is in substance as... required to be published by state or federal law or regulation; (2) Credit union supplies such as..., matchbooks, pens, pencils, and key chains; (11) Advertisements that contain a statement to the effect that...

12 CFR 740.5 - Requirements for the official advertising statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... statement until the supplies are exhausted. (b) The official advertising statement is in substance as... required to be published by state or federal law or regulation; (2) Credit union supplies such as..., matchbooks, pens, pencils, and key chains; (11) Advertisements that contain a statement to the effect that...

DEVELOPMENT AND VALIDATION OF AN AIR-TO-BEEF FOOD CHAIN MODEL FOR DIOXIN-LIKE COMPOUNDS

EPA Science Inventory

A model for predicting concentrations of dioxin-like compounds in beef is developed and tested. The key premise of the model is that concentrations of these compounds in air are the source term, or starting point, for estimating beef concentrations. Vapor-phase concentrations t...

Uncovering Mental Representations with Markov Chain Monte Carlo

ERIC Educational Resources Information Center

Sanborn, Adam N.; Griffiths, Thomas L.; Shiffrin, Richard M.

2010-01-01

A key challenge for cognitive psychology is the investigation of mental representations, such as object categories, subjective probabilities, choice utilities, and memory traces. In many cases, these representations can be expressed as a non-negative function defined over a set of objects. We present a behavioral method for estimating these…

Physical unclonable functions: A primer

DOE PAGES

Bauer, Todd; Hamlet, Jason

2014-11-01

Physical unclonable functions (PUFs) make use of the measurable intrinsic randomness of physical systems to establish signatures for those systems. Thus, PUFs provide a means to generate unique keys that don't need to be stored in nonvolatile memory, and they offer exciting opportunities for new authentication and supply chain security technologies.

FOOD CHAIN TRANSFER AND BIOAVAILABILITY OF CD AND OTHER ELEMENTS IN PLANTS GROWN ON BIOSOLIDS AMENDED SOILS

EPA Science Inventory

Application of biosolids, livestock manures, compost, and many byproducts add heavy metals to soil. Exposure of humans, livestock and wildlife to these added heavy metals continues to be a concern despite the research and risk assessments which suggest otherwise. Key concepts gov...

Food Safety, Farm to Fork.

ERIC Educational Resources Information Center

Jones, Rebecca

1998-01-01

In response to growing threat of food-borne illness, the federal government launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Points system (HACCP), designed to make everyone in the food-delivery chain responsible for ensuring a safe food supply. The Food and Drug Administration also announced a beef…

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

Paige Jadun | NREL

Science.gov Websites

dynamics. She has performed research in sustainable mobility, network optimization, supply chain analysis Experience Supply Chain Design Consultant, LLamasoft, Ann Arbor, MI Featured Publications Laura J

Predictors of chain acquisition among independent dialysis facilities.

PubMed

Pozniak, Alyssa S; Hirth, Richard A; Banaszak-Holl, Jane; Wheeler, John R C

2010-04-01

To determine the predictors of chain acquisition among independent dialysis providers. Retrospective facility-level data combined from CMS Cost Reports, Medical Evidence Forms, Annual Facility Surveys, and claims for 1996-2003. Independent dialysis facilities' probability of acquisition by a dialysis chain (overall and by chain size) was estimated using a discrete time hazard rate model, controlling for financial and clinical performance, practice patterns, market factors, and other facility characteristics. The sample includes all U.S. freestanding dialysis facilities that report not being chain affiliated for at least 1 year between 1997 and 2003. Above-average costs and better quality outcomes are significant determinants of dialysis chain acquisition. Facilities in larger markets were more likely to be acquired by a chain. Furthermore, small dialysis chains have different acquisition strategies than large chains. Dialysis chains appear to employ a mix of turn-around and cream-skimming strategies. Poor financial health is a predictor of chain acquisition as in other health care sectors, but the increased likelihood of chain acquisition among higher quality facilities is unique to the dialysis industry. Significant differences among predictors of acquisition by small and large chains reinforce the importance of using a richer classification for chain status.

The Effect of Causal Chain Length on Counterfactual Conditional Reasoning

ERIC Educational Resources Information Center

Beck, Sarah R.; Riggs, Kevin J.; Gorniak, Sarah L.

2010-01-01

We investigated German and Nichols' finding that 3-year-olds could answer counterfactual conditional questions about short causal chains of events, but not long. In four experiments (N = 192), we compared 3- and 4-year-olds' performance on short and long causal chain questions, manipulating whether the child could draw on general knowledge to…

KymoKnot: A web server and software package to identify and locate knots in trajectories of linear or circular polymers.

PubMed

Tubiana, Luca; Polles, Guido; Orlandini, Enzo; Micheletti, Cristian

2018-06-07

The KymoKnot software package and web server identifies and locates physical knots or proper knots in a series of polymer conformations. It is mainly intended as an analysis tool for trajectories of linear or circular polymers, but it can be used on single instances too, e.g. protein structures in PDB format. A key element of the software package is the so-called minimally interfering chain closure algorithm that is used to detect physical knots in open chains and to locate the knotted region in both open and closed chains. The web server offers a user-friendly graphical interface that identifies the knot type and highlights the knotted region on each frame of the trajectory, which the user can visualize interactively from various viewpoints. The dynamical evolution of the knotted region along the chain contour is presented as a kymograph. All data can be downloaded in text format. The KymoKnot package is licensed under the BSD 3-Clause licence. The server is publicly available at http://kymoknot.sissa.it/kymoknot/interactive.php .

Supply chain network design problem for a new market opportunity in an agile manufacturing system

NASA Astrophysics Data System (ADS)

Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza

2012-08-01

The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.

A new ChainMail approach for real-time soft tissue simulation.

PubMed

Zhang, Jinao; Zhong, Yongmin; Smith, Julian; Gu, Chengfan

2016-07-03

This paper presents a new ChainMail method for real-time soft tissue simulation. This method enables the use of different material properties for chain elements to accommodate various materials. Based on the ChainMail bounding region, a new time-saving scheme is developed to improve computational efficiency for isotropic materials. The proposed method also conserves volume and strain energy. Experimental results demonstrate that the proposed ChainMail method can not only accommodate isotropic, anisotropic and heterogeneous materials but also model incompressibility and relaxation behaviors of soft tissues. Further, the proposed method can achieve real-time computational performance.

Molecular dynamics simulation of the folding of single alkane chains with different lengths on single-walled carbon nanotubes and graphene.

PubMed

Liu, Yan Fang; Yang, Hua; Zhang, Hui

2018-05-31

Chain folding is an important step during polymer crystallization. In order to study the effects of the surface on chain folding, molecular dynamics simulations of the folding of different alkane chains on three kinds of single-walled carbon nanotubes (SWCNTs) and graphene were performed. The folding behaviors of the single alkane chains on these surfaces were found to be different from their folding behaviors in vacuum. The end-to-end distances of the chains were calculated to explore the chain folding. An increasing tendency to fold into two or more stems with increasing alkane chain length was observed. This result indicates that the occurrence and the stability of chain folding are related to the surface curvature, the diameter of the SWCNT, and surface texture. In addition, the angle between the direction of the alkane chain segment and the direction of the surface texture was measured on different surfaces.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

PubMed Central

Chaharsooghi, S. K.; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis. PMID:27379267

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method.

PubMed

Chaharsooghi, S K; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis.

Simulation-optimization model for production planning in the blood supply chain.

PubMed

Osorio, Andres F; Brailsford, Sally C; Smith, Honora K; Forero-Matiz, Sonia P; Camacho-Rodríguez, Bernardo A

2017-12-01

Production planning in the blood supply chain is a challenging task. Many complex factors such as uncertain supply and demand, blood group proportions, shelf life constraints and different collection and production methods have to be taken into account, and thus advanced methodologies are required for decision making. This paper presents an integrated simulation-optimization model to support both strategic and operational decisions in production planning. Discrete-event simulation is used to represent the flows through the supply chain, incorporating collection, production, storing and distribution. On the other hand, an integer linear optimization model running over a rolling planning horizon is used to support daily decisions, such as the required number of donors, collection methods and production planning. This approach is evaluated using real data from a blood center in Colombia. The results show that, using the proposed model, key indicators such as shortages, outdated units, donors required and cost are improved.

End-Functionalized Palladium SCS Pincer Polymers via Controlled Radical Polymerizations.

PubMed

Lye, Diane S; Cohen, Aaron E; Wong, Madeleine Z; Weck, Marcus

2017-07-01

A direct and facile route toward semitelechelic polymers, end-functionalized with palladated sulfur-carbon-sulfur pincer (Pd II -pincer) complexes is reported that avoids any post-polymerization step. Key to our methodology is the combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization with functionalized chain-transfer agents. This strategy yields Pd end-group-functionalized materials with monomodal molar mass dispersities (Đ) of 1.18-1.44. The RAFT polymerization is investigated using a Pd II -pincer chain-transfer agent for three classes of monomers: styrene, tert-butyl acrylate, and N-isopropylacrylamide. The ensuing Pd II -pincer end-functionalized polymers are analyzed using 1 H NMR spectroscopy, gel-permeation chromatography, and elemental analysis. The RAFT polymerization methodology provides a direct pathway for the fabrication of Pd II -pincer functionalized polymers with complete end-group functionalization. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Josh; West, Devin

This study identifies key opportunities in the carbon fiber supply chain where the United States Department of Energy's Office of Energy Efficiency and Renewable Energy resources and investments can help the United States achieve or maintain a competitive advantage. The report focuses on four application areas--wind energy, aerospace, automotive, and pressure vessels--that top the list of industries using carbon fiber and carbon fiber reinforced polymers and are also particularly relevant to EERE's mission. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components,more » all contributing to a competitiveness assessment that addresses the United States' role in future industry growth. This report was prepared by researchers at Oak Ridge National Laboratory and the University of Tennessee for the Clean Energy Manufacturing Analysis Center.« less

Early time evolution of a localized nonlinear excitation in the β-FPUT chain

NASA Astrophysics Data System (ADS)

Kashyap, Rahul; Westley, Alexandra; Datta, Amitava; Sen, Surajit

2017-04-01

We present the detailed dynamics of the particles in the β-Fermi-Pasta-Ulam-Tsingou (FPUT) chain after the initiation of a localized nonlinear excitation (LNE) by squeezing a central bond in the monodispersed chain at time t = 0 while all other particles remain in their original relaxed positions. In the absence of phonons in the system, the LNE appears to initiate its relaxation process by symmetrically emitting two very weak solitary waves. The next stage involves the spreading of the LNE and the formation of nonsolitary wave-like objects to broaden the excitation region until a stage is reached when many weak solitary wave-like objects can be emitted as the system begins its journey to quasi-equilibrium and then to equilibrium. In addition to being of fundamental interest, these systems may be realized using cantilever systems and could well hold the key to constructing the next generation of broadband energy harvesting systems.

The development of the ICME supply-chain: Route to ICME implementation and sustainment

NASA Astrophysics Data System (ADS)

Furrer, David; Schirra, John

2011-04-01

Over the past twenty years, integrated computational materials engineering (ICME) has emerged as a key engineering field with great promise. Models simulating materials-related phenomena have been developed and are being validated for industrial application. The integration of computational methods into material, process and component design has been a challenge, however, in part due to the complexities in the development of an ICME "supply-chain" that supports, sustains and delivers this emerging technology. ICME touches many disciplines, which results in a requirement for many types of computational-based technology organizations to be involved to provide tools that can be rapidly developed, validated, deployed and maintained for industrial applications. The need for, and the current state of an ICME supply-chain along with development and future requirements for the continued pace of introduction of ICME into industrial design practices will be reviewed within this article.

Chemical event chain model of coupled genetic oscillators.

PubMed

Jörg, David J; Morelli, Luis G; Jülicher, Frank

2018-03-01

We introduce a stochastic model of coupled genetic oscillators in which chains of chemical events involved in gene regulation and expression are represented as sequences of Poisson processes. We characterize steady states by their frequency, their quality factor, and their synchrony by the oscillator cross correlation. The steady state is determined by coupling and exhibits stochastic transitions between different modes. The interplay of stochasticity and nonlinearity leads to isolated regions in parameter space in which the coupled system works best as a biological pacemaker. Key features of the stochastic oscillations can be captured by an effective model for phase oscillators that are coupled by signals with distributed delays.

Strategic management of technostress. The chaining of Prometheus.

PubMed

Caro, D H; Sethi, A S

1985-12-01

The article proposes the concept of technostress and makes a strong recommendation for conducting research based on key researchable hypotheses. A conceptual framework of technostress is suggested to provide some focus to future research. A number of technostress management strategies are put forward, including strategic technological planning, organization culture development, technostress monitoring systems, and technouser self-development programs. The management of technostress is compared to the chaining of Prometheus, which, left uncontrolled, can create havoc in an organization. The authors believe that organizations have a responsibility to introduce, diffuse, and manage computer technology in such a way that it is congruent with the principles of sound, supportive, and humanistic management.

Chemical event chain model of coupled genetic oscillators

NASA Astrophysics Data System (ADS)

Jörg, David J.; Morelli, Luis G.; Jülicher, Frank

2018-03-01

We introduce a stochastic model of coupled genetic oscillators in which chains of chemical events involved in gene regulation and expression are represented as sequences of Poisson processes. We characterize steady states by their frequency, their quality factor, and their synchrony by the oscillator cross correlation. The steady state is determined by coupling and exhibits stochastic transitions between different modes. The interplay of stochasticity and nonlinearity leads to isolated regions in parameter space in which the coupled system works best as a biological pacemaker. Key features of the stochastic oscillations can be captured by an effective model for phase oscillators that are coupled by signals with distributed delays.

Transformational leadership: a cascading chain reaction.

PubMed

Murphy, Lorraine

2005-03-01

Historical influences still permeate contemporary nursing practise. These are mirrored in organizational philosophies, transactional and autocratic leadership styles and disempowered staff. Whilst there is disparity amongst the theorists' definitions of leadership, there is consensus pertaining to the attributes necessary to realize effective leadership. Transformational leadership is heralded as new criterion for nurse managers, and can be achieved through training, education and professional development in key leadership competencies. To achieve a chain reaction, charismatic transformational leaders espouse intellectual stimulation and individual consideration to empower staff and enhance patient care. Nurse managers that develop and foster transformational leadership can surmount oppressive traditions and confidently navigate a complex and rapidly changing health care environment.

The commercial performance of cellulosic ethanol supply-chains in Europe

PubMed Central

Slade, Raphael; Bauen, Ausilio; Shah, Nilay

2009-01-01

Background The production of fuel-grade ethanol from lignocellulosic biomass resources has the potential to increase biofuel production capacity whilst minimising the negative environmental impacts. These benefits will only be realised if lignocellulosic ethanol production can compete on price with conventional fossil fuels and if it can be produced commercially at scale. This paper focuses on lignocellulosic ethanol production in Europe. The hypothesis is that the eventual cost of production will be determined not only by the performance of the conversion process but by the performance of the entire supply-chain from feedstock production to consumption. To test this, a model for supply-chain cost comparison is developed, the components of representative ethanol supply-chains are described, the factors that are most important in determining the cost and profitability of ethanol production are identified, and a detailed sensitivity analysis is conducted. Results The most important cost determinants are the cost of feedstocks, primarily determined by location and existing markets, and the value obtained for ethanol, primarily determined by the oil price and policy incentives. Both of these factors are highly uncertain. The best performing chains (ethanol produced from softwood and sold as a low percentage blend with gasoline) could ultimately be cost competitive with gasoline without requiring subsidy, but production from straw would generally be less competitive. Conclusion Supply-chain design will play a critical role in determining commercial viability. The importance of feedstock supply highlights the need for location-specific assessments of feedstock availability and price. Similarly, the role of subsidies and policy incentives in creating and sustaining the ethanol market highlights the importance of political engagement and the need to include political risks in investment appraisal. For the supply-chains described here, and with the cost and market parameters selected, selling ethanol as a low percentage blend with gasoline will maximise ethanol revenues and minimise the need for subsidies. It follows, therefore, that the market for low percentage blends should be saturated before markets for high percentage blends. PMID:19192294

[Supply services at health facilities: measuring performance].

PubMed

Dacosta Claro, I

2001-01-01

Performance measurement, in their different meanings--either balance scorecard or outputs measurement--have become an essential tool in today's organizations (World-Class organizations) to improve service quality and reduce costs. This paper presents a performance measurement system for the hospital supply chain. The system is organized in different levels and groups of indicators in order to show a hierarchical, coherent and integrated vision of the processes. Thus, supply services performance is measured according to (1) financial aspects, (2) customers satisfaction aspects and (3) internal aspects of the processes performed. Since the informational needs of the managers vary within the administrative structure, the performance measurement system is defined in three hierarchical levels. Firstly, the whole supply chain, with the different interrelation of activities. Secondly, the three main processes of the chain--physical management of products, purchasing and negotiation processes and the local storage units. And finally, the performance measurement of each activity involved. The system and the indicators have been evaluated with the participation of 17 health services of Quebec (Canada), however, and due to the similarities of the operation, could be equally implemented in Spanish hospitals.

Supply chain management of health commodities for reducing global disease burden.

PubMed

Chukwu, Otuto Amarauche; Ezeanochikwa, Valentine Nnaemeka; Eya, Benedict Ejikeme

Reducing global disease burden requires improving access to medicines, thus the need for efficient and effective supply chain management for medicines. The Nigerian government came up with new policies on Mega Drug Distribution Centres and National Drug Distribution Guidelines to improve access to quality medicines with pharmacists having a key role to play. However, pharmacists in Nigeria seem not to be aware and adequately equipped to handle the medicines supply chain. This article aimed at assessing the awareness and readiness of Nigerian pharmacists on supply chain management practices for improving access to medicines. Pharmacists in Nigeria's Capital were randomly sampled. Semi-structured questionnaires were administered. Descriptive statistics was used in data analysis. P values less than 0.05 were considered to be significant. 29.3%, 20.7% and 53.7% were not aware of supply chain management, National Drug Distribution Guidelines and Mega Drug Distribution Centres, respectively. 85.46% do not have a copy of the National Drug Distribution Guidelines. 78% were not aware that Mega Drug Distribution Centres are already operational. 35.4% have never been involved in any supply chain management practice. 69.5% often experience stock out of vital and essential medicines, of which 85.2% were in hospitals. 15.9% were successful in managing their facility's supply chains. 84.1% opined that pharmacists in Nigeria are not yet ready to handle the medicines supply chain. Findings showed limited awareness and readiness on supply chain management of medicines. This may be due to inadequate supply chain management skills and infrastructure, poor financing, lack of accountability and poor management. Tackling these as well as pharmacists showing more interest in the country's health policies and obtaining necessary postgraduate certifications will lead to improvements. This will improve access to quality medicines and thus help in the fight to reduce disease burden both locally and globally. Copyright © 2016 Elsevier Inc. All rights reserved.

Performance Prediction of a MongoDB-Based Traceability System in Smart Factory Supply Chains

PubMed Central

Kang, Yong-Shin; Park, Il-Ha; Youm, Sekyoung

2016-01-01

In the future, with the advent of the smart factory era, manufacturing and logistics processes will become more complex, and the complexity and criticality of traceability will further increase. This research aims at developing a performance assessment method to verify scalability when implementing traceability systems based on key technologies for smart factories, such as Internet of Things (IoT) and BigData. To this end, based on existing research, we analyzed traceability requirements and an event schema for storing traceability data in MongoDB, a document-based Not Only SQL (NoSQL) database. Next, we analyzed the algorithm of the most representative traceability query and defined a query-level performance model, which is composed of response times for the components of the traceability query algorithm. Next, this performance model was solidified as a linear regression model because the response times increase linearly by a benchmark test. Finally, for a case analysis, we applied the performance model to a virtual automobile parts logistics. As a result of the case study, we verified the scalability of a MongoDB-based traceability system and predicted the point when data node servers should be expanded in this case. The traceability system performance assessment method proposed in this research can be used as a decision-making tool for hardware capacity planning during the initial stage of construction of traceability systems and during their operational phase. PMID:27983654

Performance Prediction of a MongoDB-Based Traceability System in Smart Factory Supply Chains.

PubMed

Kang, Yong-Shin; Park, Il-Ha; Youm, Sekyoung

2016-12-14

In the future, with the advent of the smart factory era, manufacturing and logistics processes will become more complex, and the complexity and criticality of traceability will further increase. This research aims at developing a performance assessment method to verify scalability when implementing traceability systems based on key technologies for smart factories, such as Internet of Things (IoT) and BigData. To this end, based on existing research, we analyzed traceability requirements and an event schema for storing traceability data in MongoDB, a document-based Not Only SQL (NoSQL) database. Next, we analyzed the algorithm of the most representative traceability query and defined a query-level performance model, which is composed of response times for the components of the traceability query algorithm. Next, this performance model was solidified as a linear regression model because the response times increase linearly by a benchmark test. Finally, for a case analysis, we applied the performance model to a virtual automobile parts logistics. As a result of the case study, we verified the scalability of a MongoDB-based traceability system and predicted the point when data node servers should be expanded in this case. The traceability system performance assessment method proposed in this research can be used as a decision-making tool for hardware capacity planning during the initial stage of construction of traceability systems and during their operational phase.

Operational seasonal forecasting of crop performance.

PubMed

Stone, Roger C; Meinke, Holger

2005-11-29

Integrated, interdisciplinary crop performance forecasting systems, linked with appropriate decision and discussion support tools, could substantially improve operational decision making in agricultural management. Recent developments in connecting numerical weather prediction models and general circulation models with quantitative crop growth models offer the potential for development of integrated systems that incorporate components of long-term climate change. However, operational seasonal forecasting systems have little or no value unless they are able to change key management decisions. Changed decision making through incorporation of seasonal forecasting ultimately has to demonstrate improved long-term performance of the cropping enterprise. Simulation analyses conducted on specific production scenarios are especially useful in improving decisions, particularly if this is done in conjunction with development of decision-support systems and associated facilitated discussion groups. Improved management of the overall crop production system requires an interdisciplinary approach, where climate scientists, agricultural scientists and extension specialists are intimately linked with crop production managers in the development of targeted seasonal forecast systems. The same principle applies in developing improved operational management systems for commodity trading organizations, milling companies and agricultural marketing organizations. Application of seasonal forecast systems across the whole value chain in agricultural production offers considerable benefits in improving overall operational management of agricultural production.

Operational seasonal forecasting of crop performance

PubMed Central

Stone, Roger C; Meinke, Holger

2005-01-01

Integrated, interdisciplinary crop performance forecasting systems, linked with appropriate decision and discussion support tools, could substantially improve operational decision making in agricultural management. Recent developments in connecting numerical weather prediction models and general circulation models with quantitative crop growth models offer the potential for development of integrated systems that incorporate components of long-term climate change. However, operational seasonal forecasting systems have little or no value unless they are able to change key management decisions. Changed decision making through incorporation of seasonal forecasting ultimately has to demonstrate improved long-term performance of the cropping enterprise. Simulation analyses conducted on specific production scenarios are especially useful in improving decisions, particularly if this is done in conjunction with development of decision-support systems and associated facilitated discussion groups. Improved management of the overall crop production system requires an interdisciplinary approach, where climate scientists, agricultural scientists and extension specialists are intimately linked with crop production managers in the development of targeted seasonal forecast systems. The same principle applies in developing improved operational management systems for commodity trading organizations, milling companies and agricultural marketing organizations. Application of seasonal forecast systems across the whole value chain in agricultural production offers considerable benefits in improving overall operational management of agricultural production. PMID:16433097

On temporal stochastic modeling of precipitation, nesting models across scales

NASA Astrophysics Data System (ADS)

Paschalis, Athanasios; Molnar, Peter; Fatichi, Simone; Burlando, Paolo

2014-01-01

We analyze the performance of composite stochastic models of temporal precipitation which can satisfactorily reproduce precipitation properties across a wide range of temporal scales. The rationale is that a combination of stochastic precipitation models which are most appropriate for specific limited temporal scales leads to better overall performance across a wider range of scales than single models alone. We investigate different model combinations. For the coarse (daily) scale these are models based on Alternating renewal processes, Markov chains, and Poisson cluster models, which are then combined with a microcanonical Multiplicative Random Cascade model to disaggregate precipitation to finer (minute) scales. The composite models were tested on data at four sites in different climates. The results show that model combinations improve the performance in key statistics such as probability distributions of precipitation depth, autocorrelation structure, intermittency, reproduction of extremes, compared to single models. At the same time they remain reasonably parsimonious. No model combination was found to outperform the others at all sites and for all statistics, however we provide insight on the capabilities of specific model combinations. The results for the four different climates are similar, which suggests a degree of generality and wider applicability of the approach.

Ligand Binding Site Detection by Local Structure Alignment and Its Performance Complementarity

PubMed Central

Lee, Hui Sun; Im, Wonpil

2013-01-01

Accurate determination of potential ligand binding sites (BS) is a key step for protein function characterization and structure-based drug design. Despite promising results of template-based BS prediction methods using global structure alignment (GSA), there is a room to improve the performance by properly incorporating local structure alignment (LSA) because BS are local structures and often similar for proteins with dissimilar global folds. We present a template-based ligand BS prediction method using G-LoSA, our LSA tool. A large benchmark set validation shows that G-LoSA predicts drug-like ligands’ positions in single-chain protein targets more precisely than TM-align, a GSA-based method, while the overall success rate of TM-align is better. G-LoSA is particularly efficient for accurate detection of local structures conserved across proteins with diverse global topologies. Recognizing the performance complementarity of G-LoSA to TM-align and a non-template geometry-based method, fpocket, a robust consensus scoring method, CMCS-BSP (Complementary Methods and Consensus Scoring for ligand Binding Site Prediction), is developed and shows improvement on prediction accuracy. The G-LoSA source code is freely available at http://im.bioinformatics.ku.edu/GLoSA. PMID:23957286

Process mining is an underutilized clinical research tool in transfusion medicine.

PubMed

Quinn, Jason G; Conrad, David M; Cheng, Calvino K

2017-03-01

To understand inventory performance, transfusion services commonly use key performance indicators (KPIs) as summary descriptors of inventory efficiency that are graphed, trended, and used to benchmark institutions. Here, we summarize current limitations in KPI-based evaluation of blood bank inventory efficiency and propose process mining as an ideal methodology for application to inventory management research to improve inventory flows and performance. The transit of a blood product from inventory receipt to final disposition is complex and relates to many internal and external influences, and KPIs may be inadequate to fully understand the complexity of the blood supply chain and how units interact with its processes. Process mining lends itself well to analysis of blood bank inventories, and modern laboratory information systems can track nearly all of the complex processes that occur in the blood bank. Process mining is an analytical tool already used in other industries and can be applied to blood bank inventory management and research through laboratory information systems data using commercial applications. Although the current understanding of real blood bank inventories is value-centric through KPIs, it potentially can be understood from a process-centric lens using process mining. © 2017 AABB.

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

Molecular dynamics simulations reveal the assembly mechanism of polysaccharides in marine aerosols.

PubMed

Sun, Lu; Li, Xin; Hede, Thomas; Tu, Yaoquan; Leck, Caroline; Ågren, Hans

2014-12-21

The high Arctic marine environment has recently detected polymer gels in atmospheric aerosol particles and cloud water originating from the surface microlayer of the open leads within the pack ice area. These polysaccharide molecules are water insoluble but water solvated, highly surface-active and highly hydrated (99% water). In order to add to the understanding and to complement missing laboratory characterization of marine polymer gels we have in this work performed an atomistic study of the assembly process and interfacial properties of polysaccharides. Our study reveals a number of salient features of the microscopic process behind polysaccharide assembly into nanogels. With three- and four-repeating units the polysaccharides assemble into a cluster in 50 ns. The aggregates grow quicker by absorbing one or two polymers each time, depending on the unit length and the type of inter-bridging cation. Although both the hydrophobic and hydrophilic domains are contracted, the latter dominates distinctly upon the contraction of solvent accessible surface areas. The establishment of inter-chain hydrogen-bonds is the key to the assembly while ionic bridges can further promote aggregation. During the assembly of the more bent four-unit polymers, intra-chain hydrogen bonds are significantly diminished by Ca(2+). Meanwhile, the percentage of Ca(2+) acting as an ionic bridge is more eminent, highlighting the significance of Ca(2+) ions for longer-chain polysaccharides. The aggregates are able to enhance surface tension more in the presence of Ca(2+) than in the presence of Na(+) owing to their more compact structure. These conclusions all demonstrate that studies of the present kind provide insight into the self-assembly process and interfacial properties of marine gels. We hope this understanding will keep up the interest in the complex and the fascinating relationship between marine microbiology, atmospheric aerosols, clouds and climate.

7-Chloro-3-methyl-3,4-dihydro-2H-1,2,4-benzothiadiazine S,S-dioxide (IDRA 21), a congener of aniracetam, potently abates pharmacologically induced cognitive impairments in patas monkeys.

PubMed Central

Thompson, D M; Guidotti, A; DiBella, M; Costa, E

1995-01-01

We report here on the ability of IDRA 21 and aniracetam, two negative allosteric modulators of glutamate-induced DL-alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptor desensitization, to attenuate alprazolam-induced learning deficit in patas monkeys working in a complex behavioral task. In one component of a multiple schedule (repeated acquisition or "learning"), patas monkeys acquired a different four-response chain each session by responding sequentially on three keys in the presence of four discriminative stimuli (geometric forms or numerals). In the other component (performance) the four-response chain was the same each session. The response chain in each component was maintained by food presentation under a fixed-ratio schedule. When alprazolam (0.1 or 0.32 mg/kg p.o.) was administered alone, this full allosteric modulator of gamma-aminobutyric acid type A (GABAA) receptors produced large decreases in the response rate and accuracy in the learning component of the task. IDRA 21 (3 or 5.6 mg/kg p.o.) and aniracetam (30 mg/kg p.o.) administered 60 min before alprazolam, having no effect when given alone, antagonized the large disruptive effects of alprazolam on learning. From dose-response studies, it can be estimated that IDRA 21 is approximately 10-fold more potent than aniracetam in antagonizing alprazolam-induced learning deficit. We conclude that IDRA 21, a chemically unrelated pharmacological congener of aniracetam, improves learning deficit induced in patas monkeys by the increase of GABAergic tone elicited by alprazolam. Very likely IDRA 21 exerts its behavioral effects by antagonizing AMPA receptor desensitization. PMID:7644474

7-Chloro-3-methyl-3,4-dihydro-2H-1,2,4-benzothiadiazine S,S-dioxide (IDRA 21), a congener of aniracetam, potently abates pharmacologically induced cognitive impairments in patas monkeys.

PubMed

Thompson, D M; Guidotti, A; DiBella, M; Costa, E

1995-08-15

We report here on the ability of IDRA 21 and aniracetam, two negative allosteric modulators of glutamate-induced DL-alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptor desensitization, to attenuate alprazolam-induced learning deficit in patas monkeys working in a complex behavioral task. In one component of a multiple schedule (repeated acquisition or "learning"), patas monkeys acquired a different four-response chain each session by responding sequentially on three keys in the presence of four discriminative stimuli (geometric forms or numerals). In the other component (performance) the four-response chain was the same each session. The response chain in each component was maintained by food presentation under a fixed-ratio schedule. When alprazolam (0.1 or 0.32 mg/kg p.o.) was administered alone, this full allosteric modulator of gamma-aminobutyric acid type A (GABAA) receptors produced large decreases in the response rate and accuracy in the learning component of the task. IDRA 21 (3 or 5.6 mg/kg p.o.) and aniracetam (30 mg/kg p.o.) administered 60 min before alprazolam, having no effect when given alone, antagonized the large disruptive effects of alprazolam on learning. From dose-response studies, it can be estimated that IDRA 21 is approximately 10-fold more potent than aniracetam in antagonizing alprazolam-induced learning deficit. We conclude that IDRA 21, a chemically unrelated pharmacological congener of aniracetam, improves learning deficit induced in patas monkeys by the increase of GABAergic tone elicited by alprazolam. Very likely IDRA 21 exerts its behavioral effects by antagonizing AMPA receptor desensitization.

Molecular simulation insights on the in vacuo adsorption of amino acids on graphene oxide surfaces with varying surface oxygen densities

NASA Astrophysics Data System (ADS)

Rahmani, Farzin; Nouranian, Sasan; Mahdavi, Mina; Al-Ostaz, Ahmed

2016-11-01

In this fundamental study, a series of molecular dynamics simulations were performed in vacuo to investigate the energetics and select geometries of 20 standard amino acids (AAs) on pristine graphene (PG) and graphene oxide (GO) surfaces as a function of graphene surface oxygen density. These interactions are of key interest to graphene/biomolecular systems. Our results indicate that aromatic AAs exhibit the strongest total interactions with the PG surfaces due to π-π stacking. Tryptophan (Trp) has the highest aromaticity due to its indole side chain and, hence, has the strongest interaction among all AAs (-16.66 kcal/mol). Aliphatic, polar, and charged AAs show various levels of affinity to the PG sheets depending on the strength of their side chain hydrophobic interactions. For example, arginine (Arg) with its guanidinium side chain exhibits the strongest interaction with the PG sheets (-13.81 kcal/mol) following aromatic AAs. Also, glycine (Gly; a polar AA) has the weakest interaction with the PG sheets (-7.29 kcal/mol). When oxygen-containing functional groups are added to the graphene sheets, the π-π stacking in aromatic AAs becomes disrupted and perfect parallelism of the aromatic rings is lost. Moreover, hydrogen bonding and/or electrostatic interactions become more pronounced. Charged AAs exhibit the strongest interactions with the GO surfaces. In general, the AA-GO interactions increase with increasing surface oxygen density, and the effect is more pronounced at higher O/C ratios. This study provides a quantitative measure of AA-graphene interactions for the design and tuning of biomolecular systems suitable for biosensing, drug delivery, and gene delivery applications.

Interaction of polyhedral oligomeric silsesquioxanes and dipalmitoylphosphatidylcholine at the air/water interface: Thermodynamic and rheological study.

PubMed

Skrzypiec, M; Georgiev, G As; Rojewska, M; Prochaska, K

2017-10-01

Polyhedral oligomeric silsesquioxanes (POSS) derivatives containing open silsesquioxane cage bear great potential for biomedical applications and therefore their lateral interactions with phospholipids, major biomembranes and drug vehicles constituent, should be studied in detail. That is why the properties of surface films by two POSS-derivatives, POSS-polyethylene glycol (POSS-PEG) and POSS-perfluoroalkyl (POSS-OFP), pure and in presence of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) were studied using Langmuir surface balance. Side chains of opposite nature (PEG is hydrophilic; OFP is hydrophobic) were selected, so that to evaluate their impact on polymers' surface properties. Two types of measurements were performed: (i) the miscibility of POSS-derivatives with DPPC was evaluated via thermodynamic analysis of the surface pressure (π)-area (A) isotherms and (ii) the dilatational rheology of selected POSS-polymer containing films was studied by the stress relaxation method. Fourier transformation analysis of the relaxation transients allows to access films' dynamic interfacial properties in broad frequency range (10 -5 -1Hz). Film morphology was monitored with Brewster Angle Microscopy. PEG moiety enabled POSS-PEG to stably incorporate in DPPC films, modifying their equilibrium and dynamic properties. In contrast OFP chains excluded from interactions with other molecules and diminished PEG-OFP amphiphilicity. Therefore at high packing densities (π≥25mN/m) PEG-OFP was expelled from the air/water interface in DPPC/PEG-OFP mixtures, and the binary films equilibrium and dynamic surface properties were determined primarily by DPPC. Thus the choice of POSS side chains can play key role in biomedical applications depending on whether strong or weak incorporation of POSS-polymers in lipid environment is aimed for. Copyright © 2017 Elsevier B.V. All rights reserved.

Markov chains: computing limit existence and approximations with DNA.

PubMed

Cardona, M; Colomer, M A; Conde, J; Miret, J M; Miró, J; Zaragoza, A

2005-09-01

We present two algorithms to perform computations over Markov chains. The first one determines whether the sequence of powers of the transition matrix of a Markov chain converges or not to a limit matrix. If it does converge, the second algorithm enables us to estimate this limit. The combination of these algorithms allows the computation of a limit using DNA computing. In this sense, we have encoded the states and the transition probabilities using strands of DNA for generating paths of the Markov chain.

Learning In networks

NASA Technical Reports Server (NTRS)

Buntine, Wray L.

1995-01-01

Intelligent systems require software incorporating probabilistic reasoning, and often times learning. Networks provide a framework and methodology for creating this kind of software. This paper introduces network models based on chain graphs with deterministic nodes. Chain graphs are defined as a hierarchical combination of Bayesian and Markov networks. To model learning, plates on chain graphs are introduced to model independent samples. The paper concludes by discussing various operations that can be performed on chain graphs with plates as a simplification process or to generate learning algorithms.

An elasto-viscoplastic interface model for investigating the constitutive behavior of nacre

NASA Astrophysics Data System (ADS)

Tang, H.; Barthelat, F.; Espinosa, H. D.

2007-07-01

In order to better understand the strengthening mechanism observed in nacre, we have developed an interface computational model to simulate the behavior of the organic present at the interface between aragonite tablets. In the model, the single polymer-chain behavior is characterized by the worm-like-chain (WLC) model, which is in turn incorporated into the eight-chain cell model developed by Arruda and Boyce [Arruda, E.M., Boyce, M.C., 1993a. A three-dimensional constitutive model for the large stretches, with application to polymeric glasses. Int. J. Solids Struct. 40, 389-412] to achieve a continuum interface constitutive description. The interface model is formulated within a finite-deformation framework. A fully implicit time-integration algorithm is used for solving the discretized governing equations. Finite element simulations were performed on a representative volume element (RVE) to investigate the tensile response of nacre. The staggered arrangement of tablets and interface waviness obtained experimentally by Barthelat et al. [Barthelat, F., Tang, H., Zavattieri, P.D., Li, C.-M., Espinosa, H.D., 2007. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J. Mech. Phys. Solids 55 (2), 306-337] was included in the RVE simulations. The simulations showed that both the rate-dependence of the tensile response and hysteresis loops during loading, unloading and reloading cycles were captured by the model. Through a parametric study, the effect of the polymer constitutive response during tablet-climbing and its relation to interface hardening was investigated. It is shown that stiffening of the organic material is not required to achieve the experimentally observed strain hardening of nacre during tension. In fact, when ratios of contour length/persistent length experimentally identified are employed in the simulations, the predicted stress-strain behavior exhibits a deformation hardening consistent with the one measured experimentally and also captured by the phenomenological cohesive model used in the study carried out by Barthelat et al. [Barthelat, F., Tang, H., Zavattieri, P.D., Li, C.-M., Espinosa, H.D., 2007. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J. Mech. Phys. Solids 55 (2), 306-337]. The simulation results also reveal that the bulk modulus of the polymer controls the rate of hardening, feature not captured by more simple cohesive laws.

Measurement of messenger RNA encoding the alpha-chain, polymeric immunoglobulin receptor, and J-chain in duodenal mucosa from dogs with and without chronic diarrhea by use of quantitative real-time reverse transcription-polymerase chain reaction assays.

PubMed

Peters, Iain R; Helps, Chris R; Calvert, Emma L; Hall, Edward J; Day, Michael J

2005-01-01

To examine the difference in expression of messenger RNA (mRNA) transcripts for polymeric immunoglobulin receptor (plgR), alpha-chain, and J-chain determined by use of quantitative real-time reverse transcription-polymerase chain reaction (QRT-PCR) assays in duodenal biopsy specimens obtained from dogs with and without chronic diarrhea. Biopsy specimens of the proximal portion of the duodenum were obtained endoscopically from 39 dogs evaluated because of chronic diarrhea (12 German Shepherd Dogs and 27 non-German Shepherd Dog breeds); specimens were also obtained from a control group of 7 dogs evaluated because of other gastrointestinal tract diseases and 2 dogs that were euthanatized as a result of nongastrointestinal tract disease. Dogs were anesthetized, and multiple mucosal biopsy specimens were obtained endoscopically at the level of the caudal duodenal flexure by use of biopsy forceps; in 2 control dogs, samples were obtained from the descending duodenum within 5 minutes of euthanasia. One-step QRT-PCR was used to quantify the level of expression of transcripts for the housekeeper gene glyceraldehyde-3-phosphate dehydrogenase, plgR, alpha-chain, and J-chain in duodenal mucosal tissue. There was no significant difference in the level of expression of any transcript among non-German Shepherd Dog breeds without diarrhea (control group), non-German Shepherd Dog breeds with chronic diarrhea, and German Shepherd Dogs with chronic diarrhea. Conclusions and Clinical Relevance-Results indicated that the susceptibility of German Shepherd Dogs to chronic diarrhea is not a result of simple failure of transcription of the key genes that encode molecules involved in mucosal IgA secretion.

Developing and sustaining human resources in the health supply chain in Ethiopia: barriers and enablers.

PubMed

Kälvemark Sporrong, Sofia; Traulsen, Janine M; Damene Kabtimer, Woynabeba; Mekasha Habtegiorgis, Bitsatab; Teshome Gebregeorgise, Dawit; Essah, Nana Am; Khan, Sara A; Brown, Andrew N

2016-01-01

The health supply chain is often the weakest link in achieving the health-related Millennium Development Goals and universal health coverage, requiring trained professionals who are often unavailable. In Ethiopia there have been recent developments in the area of health supply chain management. The aim of this study was to explore the current status of the development of human resources in health supply chain management in Ethiopia and to identify important factors affecting this development. A series of face-to-face interviews with key stakeholders was carried out in 2014. The interviews were conducted using a semi-structured interview guide. The interview guide comprised 51 questions. A qualitative analysis of transcripts was made. A total of 25 interviews were conducted. Three themes were identified: General changes: recognition, commitment and resources, Education and training, and Barriers and enablers. Results confirm the development of human resources in health supply chain management in many areas. However, several problems were identified including lack of coordination, partly due to the large number of stakeholders; reported high staff mobility; and a lack of overall strategy regarding the job/career structures necessary for maintaining human resources. Rural areas have a particular set of problems, including in transportation of goods and personnel, attracting and keeping personnel, and in communication and access to information. Ethiopia is on the way to developing a nationwide viable system for health supply chain management. However, there are still challenges. Short-term challenges include the importance of highlighting strategies and programs for human resources in health supply chain management. In the long term, commitments to financial support must be obtained. A strategy is needed for the further development and sustainability of human resources in the health supply chain in Ethiopia.

Effects of flexibility of the α2 chain of type I collagen on collagenase cleavage.

PubMed

Mekkat, Arya; Poppleton, Erik; An, Bo; Visse, Robert; Nagase, Hideaki; Kaplan, David L; Brodsky, Barbara; Lin, Yu-Shan

2018-05-12

Cleavage of collagen by collagenases such as matrix metalloproteinase 1 (MMP-1) is a key step in development, tissue remodeling, and tumor proliferation. The abundant heterotrimeric type I collagen composed of two α1(I) chains and one α2(I) chain is efficiently cleaved by MMP-1 at a unique site in the triple helix, a process which may be initiated by local unfolding within the peptide chains. Atypical homotrimers of the α1(I) chain, found in embryonic and cancer tissues, are very resistant to MMP cleavage. To investigate MMP-1 cleavage, recombinant homotrimers were constructed with sequences from the MMP cleavage regions of human collagen chains inserted into a host bacterial collagen protein system. All triple-helical constructs were cleaved by MMP-1, with α2(I) homotrimers cleaved efficiently at a rate similar to that seen for α1(II) and α1(III) homotrimers, while α1(I) homotrimers were cleaved at a much slower rate. The introduction of destabilizing Gly to Ser mutations within the human collagenase susceptible region of the α2(I) chain did not interfere with MMP-1 cleavage. Molecular dynamics simulations indicated a greater degree of transient hydrogen bond breaking in α2(I) homotrimers compared with α1(I) homotrimers at the MMP-1 cleavage site, and showed an extensive disruption of hydrogen bonding in the presence of a Gly to Ser mutation, consistent with chymotrypsin digestion results. This study indicates that α2(I) homotrimers are susceptible to MMP-1, proves that the presence of an α1(I) chain is not a requirement for α2(I) cleavage, and supports the importance of local unfolding of α2(I) in collagenase cleavage. Copyright © 2018. Published by Elsevier Inc.

Properties, performance and associated hazards of state-of-the-art durable water repellent (DWR) chemistry for textile finishing.

PubMed

Holmquist, H; Schellenberger, S; van der Veen, I; Peters, G M; Leonards, P E G; Cousins, I T

2016-05-01

Following the phase-out of long-chain per- and polyfluoroalkyl substances (PFASs), the textile industry had to find alternatives for side-chain fluorinated polymer based durable water repellent (DWR) chemistries that incorporated long perfluoroalkyl side chains. This phase-out and subsequent substitution with alternatives has resulted in a market where both fluorinated and non-fluorinated DWRs are available. These DWR alternatives can be divided into four broad groups that reflect their basic chemistry: side-chain fluorinated polymers, silicones, hydrocarbons and other chemistries (includes dendrimer and inorganic nanoparticle chemistries). In this critical review, the alternative DWRs are assessed with regards to their structural properties and connected performance, loss and degradation processes resulting in diffuse environmental emissions, and hazard profiles for selected emitted substances. Our review shows that there are large differences in performance between the alternative DWRs, most importantly the lack of oil repellence of non-fluorinated alternatives. It also shows that for all alternatives, impurities and/or degradation products of the DWR chemistries are diffusively emitted to the environment. Our hazard ranking suggests that hydrocarbon based DWR is the most environmentally benign, followed by silicone and side-chain fluorinated polymer-based DWR chemistries. Industrial commitments to reduce the levels of impurities in silicone based and side-chain fluorinated polymer based DWR formulations will lower the actual risks. There is a lack of information on the hazards associated with DWRs, in particular for the dendrimer and inorganic nanoparticle chemistries, and these data gaps must be filled. Until environmentally safe alternatives, which provide the required performance, are available our recommendation is to choose DWR chemistry on a case-by-case basis, always weighing the benefits connected to increased performance against the risks to the environment and human health. Copyright © 2016 Elsevier Ltd. All rights reserved.

Protein Side-Chain Resonance Assignment and NOE Assignment Using RDC-Defined Backbones without TOCSY Data3

PubMed Central

Zeng, Jianyang; Zhou, Pei; Donald, Bruce Randall

2011-01-01

One bottleneck in NMR structure determination lies in the laborious and time-consuming process of side-chain resonance and NOE assignments. Compared to the well-studied backbone resonance assignment problem, automated side-chain resonance and NOE assignments are relatively less explored. Most NOE assignment algorithms require nearly complete side-chain resonance assignments from a series of through-bond experiments such as HCCH-TOCSY or HCCCONH. Unfortunately, these TOCSY experiments perform poorly on large proteins. To overcome this deficiency, we present a novel algorithm, called NASCA (NOE Assignment and Side-Chain Assignment), to automate both side-chain resonance and NOE assignments and to perform high-resolution protein structure determination in the absence of any explicit through-bond experiment to facilitate side-chain resonance assignment, such as HCCH-TOCSY. After casting the assignment problem into a Markov Random Field (MRF), NASCA extends and applies combinatorial protein design algorithms to compute optimal assignments that best interpret the NMR data. The MRF captures the contact map information of the protein derived from NOESY spectra, exploits the backbone structural information determined by RDCs, and considers all possible side-chain rotamers. The complexity of the combinatorial search is reduced by using a dead-end elimination (DEE) algorithm, which prunes side-chain resonance assignments that are provably not part of the optimal solution. Then an A* search algorithm is employed to find a set of optimal side-chain resonance assignments that best fit the NMR data. These side-chain resonance assignments are then used to resolve the NOE assignment ambiguity and compute high-resolution protein structures. Tests on five proteins show that NASCA assigns resonances for more than 90% of side-chain protons, and achieves about 80% correct assignments. The final structures computed using the NOE distance restraints assigned by NASCA have backbone RMSD 0.8 – 1.5 Å from the reference structures determined by traditional NMR approaches. PMID:21706248

Diversion of phagosome trafficking by pathogenic Rhodococcus equi depends on mycolic acid chain length

PubMed Central

Sydor, Tobias; Bargen, Kristine; Hsu, Fong-Fu; Huth, Gitta; Holst, Otto; Wohlmann, Jens; Becken, Ulrike; Dykstra, Tobias; Söhl, Kristina; Lindner, Buko; Prescott, John F; Schaible, Ulrich E; Utermöhlen, Olaf; Haas, Albert

2013-01-01

Rhodococcus equi is a close relative of Mycobacterium spp. and a facultative intracellular pathogen which arrests phagosome maturation in macrophages before the late endocytic stage. We have screened a transposon mutant library of R. equi for mutants with decreased capability to prevent phagolysosome formation. This screen yielded a mutant in the gene for β-ketoacyl-(acyl carrier protein)-synthase A (KasA), a key enzyme of the long-chain mycolic acid synthesizing FAS-II system. The longest kasA mutant mycolic acid chains were 10 carbon units shorter than those of wild-type bacteria. Coating of non-pathogenic E. coli with purified wild-type trehalose dimycolate reduced phagolysosome formation substantially which was not the case with shorter kasA mutant-derived trehalose dimycolate. The mutant was moderately attenuated in macrophages and in a mouse infection model, but was fully cytotoxic.Whereas loss of KasA is lethal in mycobacteria, R. equi kasA mutant multiplication in broth was normal proving that long-chain mycolic acid compounds are not necessarily required for cellular integrity and viability of the bacteria that typically produce them. This study demonstrates a central role of mycolic acid chain length in diversion of trafficking by R. equi. PMID:23078612

Diversion of phagosome trafficking by pathogenic Rhodococcus equi depends on mycolic acid chain length.

PubMed

Sydor, Tobias; von Bargen, Kristine; Hsu, Fong-Fu; Huth, Gitta; Holst, Otto; Wohlmann, Jens; Becken, Ulrike; Dykstra, Tobias; Söhl, Kristina; Lindner, Buko; Prescott, John F; Schaible, Ulrich E; Utermöhlen, Olaf; Haas, Albert

2013-03-01

Rhodococcus equi is a close relative of Mycobacterium spp. and a facultative intracellular pathogen which arrests phagosome maturation in macrophages before the late endocytic stage. We have screened a transposon mutant library of R. equi for mutants with decreased capability to prevent phagolysosome formation. This screen yielded a mutant in the gene for β-ketoacyl-(acyl carrier protein)-synthase A (KasA), a key enzyme of the long-chain mycolic acid synthesizing FAS-II system. The longest kasA mutant mycolic acid chains were 10 carbon units shorter than those of wild-type bacteria. Coating of non-pathogenic E. coli with purified wild-type trehalose dimycolate reduced phagolysosome formation substantially which was not the case with shorter kasA mutant-derived trehalose dimycolate. The mutant was moderately attenuated in macrophages and in a mouse infection model, but was fully cytotoxic.Whereas loss of KasA is lethal in mycobacteria, R. equi kasA mutant multiplication in broth was normal proving that long-chain mycolic acid compounds are not necessarily required for cellular integrity and viability of the bacteria that typically produce them. This study demonstrates a central role of mycolic acid chain length in diversion of trafficking by R. equi. © 2012 Blackwell Publishing Ltd.

Decorin GAG synthesis and TGF-β signaling mediate Ox-LDL-induced mineralization of human vascular smooth muscle cells.

PubMed

Yan, Jianyun; Stringer, Sally E; Hamilton, Andrew; Charlton-Menys, Valentine; Götting, Christian; Müller, Benjamin; Aeschlimann, Daniel; Alexander, M Yvonne

2011-03-01

Decorin and oxidized low-density lipoprotein (Ox-LDL) independently induce osteogenic differentiation of vascular smooth muscle cells (VSMCs). We aimed to determine whether decorin glycosaminoglycan (GAG) chain synthesis contributes to Ox-LDL-induced differentiation and calcification of human VSMCs in vitro. Human VSMCs treated with Ox-LDL to induce oxidative stress showed increased alkaline phosphatase (ALP) activity, accelerated mineralization, and a difference in both decorin GAG chain biosynthesis and CS/DS structure compared with untreated controls. Ox-LDL increased mRNA abundance of both xylosyltransferase (XT)-I, the key enzyme responsible for GAG chain biosynthesis and Msx2, a marker of osteogenic differentiation. Furthermore, downregulation of XT-I expression using small interfering RNA blocked Ox-LDL-induced VSMC mineralization. Adenoviral-mediated overexpression of decorin, but not a mutated unglycanated form, accelerated mineralization of VSMCs, suggesting GAG chain addition on decorin is crucial for the process of differentiation. The decorin-induced VSMC osteogenic differentiation involved activation of the transforming growth factor (TGF)-β pathway, because it was attenuated by blocking of TGF-β receptor signaling and because decorin overexpression potentiated phosphorylation of the downstream signaling molecule smad2. These studies provide direct evidence that oxidative stress-mediated decorin GAG chain synthesis triggers TGF-β signaling and mineralization of VSMCs in vitro.

Plastic recycling in the Nordics: A value chain market analysis.

PubMed

Milios, Leonidas; Holm Christensen, Lena; McKinnon, David; Christensen, Camilla; Rasch, Marie Katrine; Hallstrøm Eriksen, Mikael

2018-06-01

There is low utilisation of plastic waste in the Nordic region and only a fraction of plastic materials go back into production processes through reuse and recycling practices. This paper aims to increase knowledge concerning factors that inhibit demand for recycled plastics, and to identify critical barriers for plastic recycling across the regional plastics value chain. A literature review and targeted interviews with key actors across the plastics value chain enabled the mapping of interactions between the major actors and identified hotspots that act as barriers to the flow of plastic materials. Barriers identified include the lack of both supply and demand of recycled plastic and are mainly attributed to the fragmented market of secondary materials. The main hotspots identified are the low demand due to price considerations, insufficient traceability and transparency in value chain transactions, and general design deficiencies in the recyclability of products. Value chain coordination is considered as the most important intervention by the interviewees, followed by the need for increased investment in innovation and technology development. Complementary measures that could counteract the identified barriers include public procurement for resource efficiency, ban on the incineration of recyclable materials, and specifications on the design of plastic products for reducing the number of different polymers, and the number and usage of additives. Copyright © 2018 Elsevier Ltd. All rights reserved.

Chain Collapse of an Amyloidogenic Intrinsically Disordered Protein

PubMed Central

Jain, Neha; Bhattacharya, Mily; Mukhopadhyay, Samrat

2011-01-01

Natively unfolded or intrinsically disordered proteins (IDPs) are under intense scrutiny due to their involvement in both normal biological functions and abnormal protein misfolding disorders. Polypeptide chain collapse of amyloidogenic IDPs is believed to play a key role in protein misfolding, oligomerization, and aggregation leading to amyloid fibril formation, which is implicated in a number of human diseases. In this work, we used bovine κ-casein, which serves as an archetypal model protein for amyloidogenic IDPs. Using a variety of biophysical tools involving both prediction and spectroscopic techniques, we first established that monomeric κ-casein adopts a collapsed premolten-globule-like conformational ensemble under physiological conditions. Our time-resolved fluorescence and light-scattering data indicate a change in the mean hydrodynamic radius from ∼4.6 nm to ∼1.9 nm upon chain collapse. We then took the advantage of two cysteines separated by 77 amino-acid residues and covalently labeled them using thiol-reactive pyrene maleimide. This dual-labeled protein demonstrated a strong excimer formation upon renaturation from urea- and acid-denatured states under both equilibrium and kinetic conditions, providing compelling evidence of polypeptide chain collapse under physiological conditions. The implication of the IDP chain collapse in protein aggregation and amyloid formation is also discussed. PMID:21961598

Bench press training program with attached chains for female volleyball and basketball athletes.

PubMed

Burnham, Timothy R; Ruud, Jason D; McGowan, Robert

2010-02-01

Attaching chains to barbells to increase strength and power has become popular for athletes; however, little scientific evidence supports this practice. The present purpose was to compare chain training to traditional training for the bench press. Women collegiate athletes in volleyball and basketball (N = 19) participated in a 16-session bench press program. They were matched into either a Traditional or a Chain training group by 1-repetition maximum (1RM). The Traditional group performed the bench press with conventional equipment, while the Chain group trained with attached chains (5% of weight). Analysis showed a significant increase in 1RM for both groups over 16 sessions, Traditional +11.8% and Chain +17.4%. The difference between the groups was not statistically significant, but suggests the women who trained with attached chains improved their bench press more than the Traditional group.

A decision model for cost effective design of biomass based green energy supply chains.

PubMed

Yılmaz Balaman, Şebnem; Selim, Hasan

2015-09-01

The core driver of this study is to deal with the design of anaerobic digestion based biomass to energy supply chains in a cost effective manner. In this concern, a decision model is developed. The model is based on fuzzy multi objective decision making in order to simultaneously optimize multiple economic objectives and tackle the inherent uncertainties in the parameters and decision makers' aspiration levels for the goals. The viability of the decision model is explored with computational experiments on a real-world biomass to energy supply chain and further analyses are performed to observe the effects of different conditions. To this aim, scenario analyses are conducted to investigate the effects of energy crop utilization and operational costs on supply chain structure and performance measures. Copyright © 2015 Elsevier Ltd. All rights reserved.

Challenges to Recruiting Population Representative Samples of Female Sex Workers in China Using Respondent Driven Sampling1

PubMed Central

Merli, M. Giovanna; Moody, James; Smith, Jeffrey; Li, Jing; Weir, Sharon; Chen, Xiangsheng

2014-01-01

We explore the network coverage of a sample of female sex workers (FSWs) in China recruited through Respondent Drive Sampling (RDS) as part of an effort to evaluate the claim of RDS of population representation with empirical data. We take advantage of unique information on the social networks of FSWs obtained from two overlapping studies --RDS and a venue-based sampling approach (PLACE) -- and use an exponential random graph modeling (ERGM) framework from local networks to construct a likely network from which our observed RDS sample is drawn. We then run recruitment chains over this simulated network to assess the assumption that the RDS chain referral process samples participants in proportion to their degree and the extent to which RDS satisfactorily covers certain parts of the network. We find evidence that, contrary to assumptions, RDS oversamples low degree nodes and geographically central areas of the network. Unlike previous evaluations of RDS which have explored the performance of RDS sampling chains on a non-hidden population, or the performance of simulated chains over previously mapped realistic social networks, our study provides a robust, empirically grounded evaluation of the performance of RDS chains on a real-world hidden population. PMID:24834869