Improving the Accessibility and Efficiency of Point-of-Care Diagnostics Services in Low- and Middle-Income Countries: Lean and Agile Supply Chain Management

PubMed Central

Kuupiel, Desmond; Bawontuo, Vitalis

2017-01-01

Access to point-of-care (POC) diagnostics services is essential for ensuring rapid disease diagnosis, management, control, and surveillance. POC testing services can improve access to healthcare especially where healthcare infrastructure is weak and access to quality and timely medical care is a challenge. Improving the accessibility and efficiency of POC diagnostics services, particularly in resource-limited settings, may be a promising route to improving healthcare outcomes. In this review, the accessibility of POC testing is defined as the distance/proximity to the nearest healthcare facility for POC diagnostics service. This review provides an overview of the impact of POC diagnostics on healthcare outcomes in low- and middle-income countries (LMICs) and factors contributing to the accessibility of POC testing services in LMICs, focusing on characteristics of the supply chain management and quality systems management, characteristics of the geographical location, health infrastructure, and an enabling policy framework for POC diagnostics services. Barriers and challenges related to the accessibility of POC diagnostics in LMICs were also discussed. Bearing in mind the reported barriers and challenges as well as the disease epidemiology in LMICs, we propose a lean and agile supply chain management framework for improving the accessibility and efficiency of POC diagnostics services in these settings. PMID:29186013

Electric vehicle (EV) storage supply chain risk and the energy market: A micro and macroeconomic risk management approach

NASA Astrophysics Data System (ADS)

Aguilar, Susanna D.

As a cost effective storage technology for renewable energy sources, Electric Vehicles can be integrated into energy grids. Integration must be optimized to ascertain that renewable energy is available through storage when demand exists so that cost of electricity is minimized. Optimization models can address economic risks associated with the EV supply chain- particularly the volatility in availability and cost of critical materials used in the manufacturing of EV motors and batteries. Supply chain risk can reflect itself in a shortage of storage, which can increase the price of electricity. We propose a micro-and macroeconomic framework for managing supply chain risk through utilization of a cost optimization model in combination with risk management strategies at the microeconomic and macroeconomic level. The study demonstrates how risk from the EVs vehicle critical material supply chain affects manufacturers, smart grid performance, and energy markets qualitatively and quantitatively. Our results illustrate how risk in the EV supply chain affects EV availability and the cost of ancillary services, and how EV critical material supply chain risk can be mitigated through managerial strategies and policy.

Increasing Army Supply Chain Performance: Using an Integrated End to End Metrics System

DTIC Science & Technology

2017-01-01

Sched Deliver Sched Delinquent Contracts Current Metrics PQDR/SDRs Forecasting Accuracy Reliability Demand Management Asset Mgmt Strategies Pipeline...are identified and characterized by statistical analysis. The study proposed a framework and tool for inventory management based on factors such as

Inventory transparency for agricultural produce through IOT

NASA Astrophysics Data System (ADS)

Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

2017-06-01

Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

Commonality in Military Equipment. A Framework to Improve Acquisition Decisions

DTIC Science & Technology

2008-01-01

Improving Acquisition Decisions Chopra, Sunil , and Peter Meindl, Supply Chain Management : Strategy, Planning, Operation, Upper Saddle River, N.J...Personnel Costs in Managing Suppliers and Ordering Parts. The effort to perform these activities may be reduced and simplified through a smaller supply ...a Combined MOS on Mechanic Supply Variability

An approach for formalising the supply chain operations

NASA Astrophysics Data System (ADS)

Zdravković, Milan; Panetto, Hervé; Trajanović, Miroslav; Aubry, Alexis

2011-11-01

Reference models play an important role in the knowledge management of the various complex collaboration domains (such as supply chain networks). However, they often show a lack of semantic precision and, they are sometimes incomplete. In this article, we present an approach to overcome semantic inconsistencies and incompleteness of the Supply Chain Operations Reference (SCOR) model and hence improve its usefulness and expand the application domain. First, we describe a literal web ontology language (OWL) specification of SCOR concepts (and related tools) built with the intention to preserve the original approach in the classification of process reference model entities, and hence enable the effectiveness of usage in original contexts. Next, we demonstrate the system for its exploitation, in specific - tools for SCOR framework browsing and rapid supply chain process configuration. Then, we describe the SCOR-Full ontology, its relations with relevant domain ontology and show how it can be exploited for improvement of SCOR ontological framework competence. Finally, we elaborate the potential impact of the presented approach, to interoperability of systems in supply chain networks.

Modeling sustainability in renewable energy supply chain systems

NASA Astrophysics Data System (ADS)

Xie, Fei

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate "environmental thinking" into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain under uncertainties. All models are mixed integer programs, which also involves multi-objective programming method and two-stage/multistage stochastic programming methods. In particular for the long-term sequential planning under uncertainties, to reduce the computational challenges due to the exponential expansion of the scenario tree, I also developed efficient ND-Max method which is more efficient than CPLEX and Nested Decomposition method. Through result analysis of four independent studies, it is found that the proposed modeling frameworks can effectively improve the economic performance, enhance environmental benefits and reduce risks due to systems uncertainties for the biofuel supply chain systems.

A stochastic inventory management model for a dual sourcing supply chain with disruptions

NASA Astrophysics Data System (ADS)

Iakovou, Eleftherios; Vlachos, Dimitrios; Xanthopoulos, Anastasios

2010-03-01

As companies continue to globalise their operations and outsource significant portion of their value chain activities, they often end up relying heavily on order replenishments from distant suppliers. The explosion in long-distance sourcing is exposing supply chains and shareholder value at ever increasing operational and disruption risks. It is well established, both in academia and in real-world business environments, that resource flexibility is an effective method for hedging against supply chain disruption risks. In this contextual framework, we propose a single period stochastic inventory decision-making model that could be employed for capturing the trade-off between inventory policies and disruption risks for an unreliable dual sourcing supply network for both the capacitated and uncapacitated cases. Through the developed model, we obtain some important managerial insights and evaluate the merit of contingency strategies in managing uncertain supply chains.

Concurrent enterprise: a conceptual framework for enterprise supply-chain network activities

NASA Astrophysics Data System (ADS)

Addo-Tenkorang, Richard; Helo, Petri T.; Kantola, Jussi

2017-04-01

Supply-chain management (SCM) in manufacturing industries has evolved significantly over the years. Recently, a lot more relevant research has picked up on the development of integrated solutions. Thus, seeking a collaborative optimisation of geographical, just-in-time (JIT), quality (customer demand/satisfaction) and return-on-investment (profits), aspects of organisational management and planning through 'best practice' business-process management - concepts and application; employing system tools such as certain applications/aspects of enterprise resource planning (ERP) - SCM systems information technology (IT) enablers to enhance enterprise integrated product development/concurrent engineering principles. This article assumed three main organisation theory applications in positioning its assumptions. Thus, proposing a feasible industry-specific framework not currently included within the SCOR model's level four (4) implementation level, as well as other existing SCM integration reference models such as in the MIT process handbook's - Process Interchange Format (PIF), the TOVE project, etc. which could also be replicated in other SCs. However, the wider focus of this paper's contribution will be concentrated on a complimentary proposed framework to the SCC's SCOR reference model. Quantitative empirical closed-ended questionnaires in addition to the main data collected from a qualitative empirical real-life industrial-based pilot case study were used: To propose a conceptual concurrent enterprise framework for SCM network activities. This research adopts a design structure matrix simulation approach analysis to propose an optimal enterprise SCM-networked value-adding, customised master data-management platform/portal for efficient SCM network information exchange and an effective supply-chain (SC) network systems-design teams' structure. Furthermore, social network theory analysis will be employed in a triangulation approach with statistical correlation analysis to assess the scale/level of frequency, importance, level of collaborative-ness, mutual trust as well as roles and responsibility among the enterprise SCM network for systems product development (PD) design teams' technical communication network as well as extensive literature reviews.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening.

PubMed

Windisch, Ricarda; Waiswa, Peter; Neuhann, Florian; Scheibe, Florian; de Savigny, Don

2011-08-01

Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance.

Agent Based Modeling and Simulation Framework for Supply Chain Risk Management

DTIC Science & Technology

2012-03-01

Christopher and Peck 2004) macroeconomic , policy, competition, and resource (Ghoshal 1987) value chain, operational, event, and recurring (Shi 2004...clustering algorithms in agent logic to protect company privacy ( da Silva et al. 2006), aggregation of domain context in agent data analysis logic (Xiang...Operational Availability ( OA ) for FMC and PMC. 75 Mission Capable (MICAP) Hours is the measure of total time (in a month) consumable or reparable

Decision support for green supply chain operations by integrating dynamic simulation and LCA indicators: diaper case study.

PubMed

Adhitya, Arief; Halim, Iskandar; Srinivasan, Rajagopalan

2011-12-01

As the issue of environmental sustainability is becoming an important business factor, companies are now looking for decision support tools to assess the fuller picture of the environmental impacts associated with their manufacturing operations and supply chain (SC) activities. Lifecycle assessment (LCA) is widely used to measure the environmental consequences assignable to a product. However, it is usually limited to a high-level snapshot of the environmental implications over the product value chain without consideration of the dynamics arising from the multitiered structure and the interactions along the SC. This paper proposes a framework for green supply chain management by integrating a SC dynamic simulation and LCA indicators to evaluate both the economic and environmental impacts of various SC decisions such as inventories, distribution network configuration, and ordering policy. The advantages of this framework are demonstrated through an industrially motivated case study involving diaper production. Three distinct scenarios are evaluated to highlight how the proposed approach enables integrated decision support for green SC design and operation.

Notes from the field: the economic value chain in disease management organizations.

PubMed

Fetterolf, Donald

2006-12-01

The disease management (DM) "value chain" is composed of a linear series of steps that include operational milestones in the development of knowledge, each stage evolving from the preceding one. As an adaptation of Michael Porter's "value chain" model, the process flow in DM moves along the following path: (1) data/information technology, (2) information generation, (3) analysis, (4) assessment/recommendations, (5) actionable customer plan, and (6) program assessment/reassessment. Each of these stages is managed as a major line of product operations within a DM company or health plan. Metrics around each of the key production variables create benchmark milestones, ongoing management insight into program effectiveness, and potential drivers for activity-based cost accounting pricing models. The value chain process must remain robust from early entry of data and information into the system, through the final presentation and recommendations for our clients if the program is to be effective. For individuals involved in the evaluation or review of DM programs, this framework is an excellent method to visualize the key components and sequence in the process. The value chain model is an excellent way to establish the value of a formal DM program and to create a consultancy relationship with a client involved in purchasing these complex services.

Environmental improvement of product supply chains: proposed best practice techniques, quantitative indicators and benchmarks of excellence for retailers.

PubMed

Styles, David; Schoenberger, Harald; Galvez-Martos, Jose-Luis

2012-11-15

Retailers are strategically positioned to leverage environmental improvement over product supply chains through actions targeted at suppliers and consumers. Informed by scientific evidence on environmental hotspots and control points across 14 priority product groups, and a review of 25 major European retailers' actions, this paper proposes a framework to guide and assess retailer best practice in supply chain environmental improvement. Commonly used product standards and improvement measures are classified into "basic" or "good" levels of environmental protection. A hierarchy of eight Best Environmental Management Practices (BEMPs) is proposed to systematically identify and improve the most environmentally damaging supply chains across retail assortments. Widespread third party environmental certification is the most transparent and verifiable mechanism of improvement but may not be appropriate for some supply chains. The enforcement of retailer-defined environmental requirements, and supplier improvement programmes based on performance benchmarking and dissemination of better management practices, are alternative BEMPs that may be used in combination with third party certification. Facilitating consumer selection of frontrunner ecological products is a lower priority BEMP owing to the well documented limitations of this approach. From available data, the highest current or credible-target sales shares of products improved according to the highest priority BEMP and environmental protection level were used to derive "benchmarks of excellence" for each of the 14 product groups. The assessment framework is demonstrated through application to three retailers. Copyright © 2012 Elsevier Ltd. All rights reserved.

Implementation of a real option in a sustainable supply chain: an empirical study of alkaline battery recycling

NASA Astrophysics Data System (ADS)

Cucchiella, Federica; D'Adamo, Idiano; Gastaldi, Massimo; Lenny Koh, S. C.

2014-06-01

Green supply chain management (GSCM) has emerged as a key approach for enterprises seeking to become environmentally sustainable. This paper aims to evaluate and describe the advantages of a GSCM approach by analysing practices and performance consequences in the battery recycling sector. It seeks to integrate works in supply chain management (SCM), environmental management, performance management and real option (RO) theory into one framework. In particular, life cycle assessment (LCA) is applied to evaluate the environmental impact of a battery recycling plant project, and life cycle costing (LCC) is applied to evaluate its economic impact. Firms, also understanding the relevance of GSCM, have often avoided applying the green principles because of the elevated costs that such management involved. Such costs could also seem superior to the potential advantages since standard performance measurement systems are internally and business focused; for these reasons, we consider all the possible value deriving also by uncertainty associated to a green project using the RO theory. This work is one of the few and pioneering efforts to investigate GSCM practices in the battery recycling sector.

Scaling up antiretroviral therapy in Uganda: using supply chain management to appraise health systems strengthening

PubMed Central

2011-01-01

Background Strengthened national health systems are necessary for effective and sustained expansion of antiretroviral therapy (ART). ART and its supply chain management in Uganda are largely based on parallel and externally supported efforts. The question arises whether systems are being strengthened to sustain access to ART. This study applies systems thinking to assess supply chain management, the role of external support and whether investments create the needed synergies to strengthen health systems. Methods This study uses the WHO health systems framework and examines the issues of governance, financing, information, human resources and service delivery in relation to supply chain management of medicines and the technologies. It looks at links and causal chains between supply chain management for ART and the national supply system for essential drugs. It combines data from the literature and key informant interviews with observations at health service delivery level in a study district. Results Current drug supply chain management in Uganda is characterized by parallel processes and information systems that result in poor quality and inefficiencies. Less than expected health system performance, stock outs and other shortages affect ART and primary care in general. Poor performance of supply chain management is amplified by weak conditions at all levels of the health system, including the areas of financing, governance, human resources and information. Governance issues include the lack to follow up initial policy intentions and a focus on narrow, short-term approaches. Conclusion The opportunity and need to use ART investments for an essential supply chain management and strengthened health system has not been exploited. By applying a systems perspective this work indicates the seriousness of missing system prerequisites. The findings suggest that root causes and capacities across the system have to be addressed synergistically to enable systems that can match and accommodate investments in disease-specific interventions. The multiplicity and complexity of existing challenges require a long-term and systems perspective essentially in contrast to the current short term and program-specific nature of external assistance. PMID:21806826

The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

NASA Astrophysics Data System (ADS)

Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

2009-08-01

With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.

Reducing stock-outs of essential tuberculosis medicines: a system dynamics modelling approach to supply chain management.

PubMed

Bam, L; McLaren, Z M; Coetzee, E; von Leipzig, K H

2017-10-01

The under-performance of supply chains presents a significant hindrance to disease control in developing countries. Stock-outs of essential medicines lead to treatment interruption which can force changes in patient drug regimens, drive drug resistance and increase mortality. This study is one of few to quantitatively evaluate the effectiveness of supply chain policies in reducing shortages and costs. This study develops a systems dynamics simulation model of the downstream supply chain for amikacin, a second-line tuberculosis drug using 10 years of South African data. We evaluate current supply chain performance in terms of reliability, responsiveness and agility, following the widely-used Supply Chain Operation Reference framework. We simulate 141 scenarios that represent different combinations of supplier characteristics, inventory management strategies and demand forecasting methods to identify the Pareto optimal set of management policies that jointly minimize the number of shortages and total cost. Despite long supplier lead times and unpredictable demand, the amikacin supply chain is 98% reliable and agile enough to accommodate a 20% increase in demand without a shortage. However, this is accomplished by overstocking amikacin by 167%, which incurs high holding costs. The responsiveness of suppliers is low: only 57% of orders are delivered to the central provincial drug depot within one month. We identify three Pareto optimal safety stock management policies. Short supplier lead time can produce Pareto optimal outcomes even in the absence of other optimal policies. This study produces concrete, actionable guidelines to cost-effectively reduce stock-outs by implementing optimal supply chain policies. Preferentially selecting drug suppliers with short lead times accommodates unexpected changes in demand. Optimal supply chain management should be an essential component of national policy to reduce the mortality rate. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Modeling Value Chain Analysis of Distance Education using UML

NASA Astrophysics Data System (ADS)

Acharya, Anal; Mukherjee, Soumen

2010-10-01

Distance education continues to grow as a methodology for the delivery of course content in higher education in India as well as abroad. To manage this growing demand and to provide certain flexibility, there must be certain strategic planning about the use of ICT tools. Value chain analysis is a framework for breaking down the sequence of business functions into a set of activities through which utility could be added to service. Thus it can help to determine the competitive advantage that is enjoyed by an institute. To implement these business functions certain visual representation is required. UML allows for this representation by using a set of structural and behavioral diagrams. In this paper, the first section defines a framework for value chain analysis and highlights its advantages. The second section gives a brief overview of related work in this field. The third section gives a brief discussion on distance education. The fourth section very briefly introduces UML. The fifth section models value chain of distance education using UML. Finally we discuss the limitations and the problems posed in this domain.

Process and data fragmentation-oriented enterprise network integration with collaboration modelling and collaboration agents

NASA Astrophysics Data System (ADS)

Li, Qing; Wang, Ze-yuan; Cao, Zhi-chao; Du, Rui-yang; Luo, Hao

2015-08-01

With the process of globalisation and the development of management models and information technology, enterprise cooperation and collaboration has developed from intra-enterprise integration, outsourcing and inter-enterprise integration, and supply chain management, to virtual enterprises and enterprise networks. Some midfielder enterprises begin to serve for different supply chains. Therefore, they combine related supply chains into a complex enterprise network. The main challenges for enterprise network's integration and collaboration are business process and data fragmentation beyond organisational boundaries. This paper reviews the requirements of enterprise network's integration and collaboration, as well as the development of new information technologies. Based on service-oriented architecture (SOA), collaboration modelling and collaboration agents are introduced to solve problems of collaborative management for service convergence under the condition of process and data fragmentation. A model-driven methodology is developed to design and deploy the integrating framework. An industrial experiment is designed and implemented to illustrate the usage of developed technologies in this paper.

Factors influencing the choice of performance measures for the oil and gas supply chain – exploratory study

NASA Astrophysics Data System (ADS)

Menhat, Masha; Yusuf, Y.

2018-04-01

The current value of the oil price per barrel has severely impacted the oil and gas industry around the world. This has worsened the situation due to the fact that it has long been the backbone of the country through the energy supply, employability and also its role as the major economic contributor. Due to multiple external factors that affect this industry such as crude oil availability, oil price fluctuation, high transportation cost, as well as exposure to high uncertainties, it is sensible for the supply chain practitioner to shift their focus in managing their resources and capabilities. To maximise the potential of supply chain activities in improving overall company performance, it is important to pay extra attention on their performance management. This includes the design of meaningful performance measurement framework to assess organisational performance. This study will explore the influencing factors in choosing performance measures for the oil and gas supply chain. Five in-depth interviews were conducted with supply chain experts within the industry. Eight influencing factors have been identified through the interviews.

Dynamics of global supply chain and electric power networks: Models, pricing analysis, and computations

NASA Astrophysics Data System (ADS)

Matsypura, Dmytro

In this dissertation, I develop a new theoretical framework for the modeling, pricing analysis, and computation of solutions to electric power supply chains with power generators, suppliers, transmission service providers, and the inclusion of consumer demands. In particular, I advocate the application of finite-dimensional variational inequality theory, projected dynamical systems theory, game theory, network theory, and other tools that have been recently proposed for the modeling and analysis of supply chain networks (cf. Nagurney (2006)) to electric power markets. This dissertation contributes to the extant literature on the modeling, analysis, and solution of supply chain networks, including global supply chains, in general, and electric power supply chains, in particular, in the following ways. It develops a theoretical framework for modeling, pricing analysis, and computation of electric power flows/transactions in electric power systems using the rationale for supply chain analysis. The models developed include both static and dynamic ones. The dissertation also adds a new dimension to the methodology of the theory of projected dynamical systems by proving that, irrespective of the speeds of adjustment, the equilibrium of the system remains the same. Finally, I include alternative fuel suppliers, along with their behavior into the supply chain modeling and analysis framework. This dissertation has strong practical implications. In an era in which technology and globalization, coupled with increasing risk and uncertainty, complicate electricity demand and supply within and between nations, the successful management of electric power systems and pricing become increasingly pressing topics with relevance not only for economic prosperity but also national security. This dissertation addresses such related topics by providing models, pricing tools, and algorithms for decentralized electric power supply chains. This dissertation is based heavily on the following coauthored papers: Nagurney, Cruz, and Matsypura (2003), Nagurney and Matsypura (2004, 2005, 2006), Matsypura and Nagurney (2005), Matsypura, Nagurney, and Liu (2006).

Study on Full Supply Chain Quality and Safetytraceability Systems For Cereal And Oilproducts

NASA Astrophysics Data System (ADS)

Liu, Shihong; Zheng, Huoguo; Meng, Hong; Hu, Haiyan; Wu, Jiangshou; Li, Chunhua

Global food industry and Governments in many countries are putting increasing emphasis on establishment of food traceability systems. Food traceability has become an effective way in food safety management. Aimed at the major quality problems of cereal and oil products existing in the production, processing, warehousing, distribution and other links in the supply chain, this paper firstly proposes a new traceability framework combines the information flow with critical control points and quality indicators. Then it introduces traceability database design and data access mode to realize the framework. In practice, Code design for tracing goods is a challenge thing, so this paper put forward a code system based on UCC/EAN-128 standard.Middleware and Electronic terminal design are also briefly introduced to accomplish traceability system for cereal and oil products.

Slowing Amazon deforestation through public policy and interventions in beef and soy supply chains.

PubMed

Nepstad, Daniel; McGrath, David; Stickler, Claudia; Alencar, Ane; Azevedo, Andrea; Swette, Briana; Bezerra, Tathiana; DiGiano, Maria; Shimada, João; Seroa da Motta, Ronaldo; Armijo, Eric; Castello, Leandro; Brando, Paulo; Hansen, Matt C; McGrath-Horn, Max; Carvalho, Oswaldo; Hess, Laura

2014-06-06

The recent 70% decline in deforestation in the Brazilian Amazon suggests that it is possible to manage the advance of a vast agricultural frontier. Enforcement of laws, interventions in soy and beef supply chains, restrictions on access to credit, and expansion of protected areas appear to have contributed to this decline, as did a decline in the demand for new deforestation. The supply chain interventions that fed into this deceleration are precariously dependent on corporate risk management, and public policies have relied excessively on punitive measures. Systems for delivering positive incentives for farmers to forgo deforestation have been designed but not fully implemented. Territorial approaches to deforestation have been effective and could consolidate progress in slowing deforestation while providing a framework for addressing other important dimensions of sustainable development. Copyright © 2014, American Association for the Advancement of Science.

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Low-carbon building assessment and multi-scale input-output analysis

NASA Astrophysics Data System (ADS)

Chen, G. Q.; Chen, H.; Chen, Z. M.; Zhang, Bo; Shao, L.; Guo, S.; Zhou, S. Y.; Jiang, M. M.

2011-01-01

Presented as a low-carbon building evaluation framework in this paper are detailed carbon emission account procedures for the life cycle of buildings in terms of nine stages as building construction, fitment, outdoor facility construction, transportation, operation, waste treatment, property management, demolition, and disposal for buildings, supported by integrated carbon intensity databases based on multi-scale input-output analysis, essential for low-carbon planning, procurement and supply chain design, and logistics management.

Order management empowering entrepreneurial partnerships in the context of new technologies

NASA Astrophysics Data System (ADS)

Tămăşilă, M.; Proştean, G.; Diaconescu, A.

2018-01-01

The expansiveness of latest generation technologies triggers manufacturers from different industry sectors more complex situations in order management with various loyal customers and occasional customers. More specifically, orders variations in logistics chain make it difficult to achieve entrepreneurial partnerships in the context of new technologies integrated into automotive and wind industry processes, which hinders getting major investments. Within this framework, the research team investigates the bottlenecks in the supply chain and indicates some rules and methods to solve the desynchronizations and fluctuations caused by the constraints of cutting-edge technologies. The paper aims to solve order management problems based on both an algorithm and an implementation in SAP. Also, in the paper, a conceptual model is created for the user whose basic task is the management of the entrepreneurial orders. Solutions identified based on the algorithm offers an order management plan by optimally adjusting inventories to deal with any kind of orders, thus achieving a profitable entrepreneurial approach between the two partners.

Mixture Distributions for Modeling Lead Time Demand in Coordinated Supply Chains

DTIC Science & Technology

2014-04-30

International Journal of Production Economics , 101...backorder price discount. International Journal of Production Economics , 111, 118–128. McClain, J. O., & Thomas, L. J. (1985). Operations management...2008). Using the inventory-theoretic framework to determine cost-minimizing supply strategies in a stochastic setting. International Journal of Production Economics ,

Supply chain optimization for pediatric perioperative departments.

PubMed

Davis, Janice L; Doyle, Robert

2011-09-01

Economic challenges compel pediatric perioperative departments to reduce nonlabor supply costs while maintaining the quality of patient care. Optimization of the supply chain introduces a framework for decision making that drives fiscally responsible decisions. The cost-effective supply chain is driven by implementing a value analysis process for product selection, being mindful of product sourcing decisions to reduce supply expense, creating logistical efficiency that will eliminate redundant processes, and managing inventory to ensure product availability. The value analysis approach is an analytical methodology for product selection that involves product evaluation and recommendation based on consideration of clinical benefit, overall financial impact, and revenue implications. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Integrated frameworks for assessing and managing health risks in the context of managed aquifer recharge with river water.

PubMed

Assmuth, Timo; Simola, Antti; Pitkänen, Tarja; Lyytimäki, Jari; Huttula, Timo

2016-01-01

Integrated assessment and management of water resources for the supply of potable water is increasingly important in light of projected water scarcity in many parts of the world. This article develops frameworks for regional-level waterborne human health risk assessment of chemical and microbiological contamination to aid water management, incorporating economic aspects of health risks. Managed aquifer recharge with surface water from a river in Southern Finland is used as an illustrative case. With a starting point in watershed governance, stakeholder concerns, and value-at-risk concepts, we merge common methods for integrative health risk analysis of contaminants to describe risks and impacts dynamically and broadly. This involves structuring analyses along the risk chain: sources-releases-environmental transport and fate-exposures-health effects-socio-economic impacts-management responses. Risks attributed to contaminants are embedded in other risks, such as contaminants from other sources, and related to benefits from improved water quality. A set of models along this risk chain in the case is presented. Fundamental issues in the assessment are identified, including 1) framing of risks, scenarios, and choices; 2) interaction of models and empirical information; 3) time dimension; 4) distributions of risks and benefits; and 5) uncertainties about risks and controls. We find that all these combine objective and subjective aspects, and involve value judgments and policy choices. We conclude with proposals for overcoming conceptual and functional divides and lock-ins to improve modeling, assessment, and management of complex water supply schemes, especially by reflective solution-oriented interdisciplinary and multi-actor deliberation. © 2015 SETAC.

Developing a global health diplomacy supply chain--a viable option for the United States to curb extremism.

PubMed

Kumar, Sameer; Honkanen, Erik J; Karl, Chad C

2009-01-01

This study examines the idea of developing a global health diplomacy supply chain as an important foreign policy approach with the aim of improving the lives of vulnerable populations and serving the best interests of the United States. The study was based on the review of academic literature, news events, and military communiques, and historical writings were studied to determine the feasibility of the idea and the extent of costs and benefits of such an endeavor. An integrated strategic business model, supported by a medical care delivery process, was developed to create a framework for a feasible global health diplomacy supply chain. The findings indicate that extremism can be contained by creating and efficiently executing an effective supply chain to get medical care units to those that need them. The limitations are the potential exit strategies required, the tactical abilities, and diplomatic techniques needed in order to create positive diplomatic change in aid distribution. Managers must consider how supply chains will affect other organizations giving aid and the potential public response. Moreover, determining the level of care necessary to achieve the greatest positive health diplomacy continues to require vigilant scrutiny over the potential cost/benefit analysis. The analysis is valuable to policymakers considering the impacts of health diplomacy by utilizing supply chain management.

A Risk-based Assessment And Management Framework For Multipollutant Air Quality

PubMed Central

Frey, H. Christopher; Hubbell, Bryan

2010-01-01

The National Research Council recommended both a risk- and performance-based multipollutant approach to air quality management. Specifically, management decisions should be based on minimizing the exposure to, and risk of adverse effects from, multiple sources of air pollution and that the success of these decisions should be measured by how well they achieved this objective. We briefly describe risk analysis and its application within the current approach to air quality management. Recommendations are made as to how current practice could evolve to support a fully risk- and performance-based multipollutant air quality management system. The ability to implement a risk assessment framework in a credible and policy-relevant manner depends on the availability of component models and data which are scientifically sound and developed with an understanding of their application in integrated assessments. The same can be said about accountability assessments used to evaluate the outcomes of decisions made using such frameworks. The existing risk analysis framework, although typically applied to individual pollutants, is conceptually well suited for analyzing multipollutant management actions. Many elements of this framework, such as emissions and air quality modeling, already exist with multipollutant characteristics. However, the framework needs to be supported with information on exposure and concentration response relationships that result from multipollutant health studies. Because the causal chain that links management actions to emission reductions, air quality improvements, exposure reductions and health outcomes is parallel between prospective risk analyses and retrospective accountability assessments, both types of assessment should be placed within a single framework with common metrics and indicators where possible. Improvements in risk reductions can be obtained by adopting a multipollutant risk analysis framework within the current air quality management system, e.g. focused on standards for individual pollutants and with separate goals for air toxics and ambient pollutants. However, additional improvements may be possible if goals and actions are defined in terms of risk metrics that are comparable across criteria pollutants and air toxics (hazardous air pollutants), and that encompass both human health and ecological risks. PMID:21209847

An interactive governance and fish chain approach to fisheries rebuilding: a case study of the Northern Gulf cod in eastern Canada.

PubMed

Khan, Ahmed; Chuenpagdee, Ratana

2014-09-01

Rebuilding collapsed fisheries is a multifaceted problem, requiring a holistic governance approach rather than technical management fixes. Using the Northern Gulf cod case study in eastern Canada, we illustrate how a "fish chain" framework, drawn from the interactive governance perspective, is particularly helpful in analyzing rebuilding challenges. The analysis demonstrates that factors limiting rebuilding exist along the entire fish chain, i.e., the pre-harvest, harvest, and post-harvest stages. These challenges are embedded in both the ecological and social systems associated with the Northern Gulf cod fisheries, as well as in the governing systems. A comparative analysis of the pre- and post-collapse of the cod fisheries also reveals governance opportunities in rebuilding, which lie in policy interventions such as integrated and ecosystem-based management, livelihood transitional programs, and cross-scale institutional arrangements. Lessons from the Northern Gulf cod case study, especially the missed opportunities to explore alternative governing options during the transition, are valuable for rebuilding other collapsed fisheries.

Lean production in improving supply chain performance through hybrid model SCOR 11.0 - system dynamics

NASA Astrophysics Data System (ADS)

Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi

2016-02-01

Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.

Global Combat Support System-Marine Corps Logistics Chain Management Increment 1 (GCSS-MC LCM Inc 1)

DTIC Science & Technology

2016-03-01

Production Document DAE - Defense Acquisition Executive DoD - Department of Defense DoDAF - DoD Architecture Framework FD - Full Deployment FDD ...Jul 2004 Milestone B Jun 2007 Jun 2007 Milestone C May 2010 May 2010 FDD Sep 2014 Mar 2015 FD Dec 2015 Dec 2015 GCSS-MC LCM Inc 1 2016 MAR

A new framework for assessing hospital crisis management based on resilience engineering approach.

PubMed

Shirali, Gh A; Azadian, Sh; Saki, A

2016-06-14

In recent years, an increasing number of natural and man-made disasters have exposed many people and properties to various disasters. This has resulted in approximately 75,000 deaths worldwide every year due to disasters. Crisis management is becoming increasingly important to cope effectively with the magnitude and potential damage resulting from disasters. Hospitals, as the final point in the rescue chain, have a key role in the crisis management and need to be resilient against disasters. The purpose of this paper is to present a new framework for assessing the crisis management based on resilience principles in hospital infrastructure of a developing country. A questionnaire was developed and completed by 310 staff (nurses and managers) of eight hospitals in Iran. The findings indicate that the eight hospitals included in the study have moderate conditions in general, while hospitals X3, X4, and X7 have poor conditions in the crisis management. Consequently, it seems that the crisis management system was not resilient in all these hospitals in general. Using resilience engineering in assessing crisis management can improve and develop the ability of the hospitals' management to cope with any type of disaster.

Framework for Identifying Cybersecurity Risks in Manufacturing

DOE PAGES

Hutchins, Margot J.; Bhinge, Raunak; Micali, Maxwell K.; ...

2015-10-21

Increasing connectivity, use of digital computation, and off-site data storage provide potential for dramatic improvements in manufacturing productivity, quality, and cost. However, there are also risks associated with the increased volume and pervasiveness of data that are generated and potentially accessible to competitors or adversaries. Enterprises have experienced cyber attacks that exfiltrate confidential and/or proprietary data, alter information to cause an unexpected or unwanted effect, and destroy capital assets. Manufacturers need tools to incorporate these risks into their existing risk management processes. This article establishes a framework that considers the data flows within a manufacturing enterprise and throughout its supplymore » chain. The framework provides several mechanisms for identifying generic and manufacturing-specific vulnerabilities and is illustrated with details pertinent to an automotive manufacturer. Finally, in addition to providing manufacturers with insights into their potential data risks, this framework addresses an outcome identified by the NIST Cybersecurity Framework.« less

Framework for Identifying Cybersecurity Risks in Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchins, Margot J.; Bhinge, Raunak; Micali, Maxwell K.

Increasing connectivity, use of digital computation, and off-site data storage provide potential for dramatic improvements in manufacturing productivity, quality, and cost. However, there are also risks associated with the increased volume and pervasiveness of data that are generated and potentially accessible to competitors or adversaries. Enterprises have experienced cyber attacks that exfiltrate confidential and/or proprietary data, alter information to cause an unexpected or unwanted effect, and destroy capital assets. Manufacturers need tools to incorporate these risks into their existing risk management processes. This article establishes a framework that considers the data flows within a manufacturing enterprise and throughout its supplymore » chain. The framework provides several mechanisms for identifying generic and manufacturing-specific vulnerabilities and is illustrated with details pertinent to an automotive manufacturer. Finally, in addition to providing manufacturers with insights into their potential data risks, this framework addresses an outcome identified by the NIST Cybersecurity Framework.« less

Designing Energy Supply Chains with the P-graph Framework under Cost Constraints and Sustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

Designing Energy Supply Chains with the P-Graph Framework under Cost Constraints andSustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

The Event Chain of Survival in the Context of Music Festivals: A Framework for Improving Outcomes at Major Planned Events.

PubMed

Lund, Adam; Turris, Sheila

2017-08-01

Despite the best efforts of event producers and on-site medical teams, there are sometimes serious illnesses, life-threatening injuries, and fatalities related to music festival attendance. Producers, clinicians, and researchers are actively seeking ways to reduce the mortality and morbidity associated with these events. After analyzing the available literature on music festival health and safety, several major themes emerged. Principally, stakeholder groups planning in isolation from one another (ie, in silos) create fragmentation, gaps, and overlap in plans for major planned events (MPEs). The authors hypothesized that one approach to minimizing this fragmentation may be to create a framework to "connect the dots," or join together the many silos of professionals responsible for safety, security, health, and emergency planning at MPEs. Adapted from the well-established literature regarding the management of cardiac arrests, both in and out of hospital, the "chain of survival" concept is applied to the disparate groups providing services that support event safety in the context of music festivals. The authors propose this framework for describing, understanding, coordinating and planning around the integration of safety, security, health, and emergency service for events. The adapted Event Chain of Survival contains six interdependent links, including: (1) event producers; (2) police and security; (3) festival health; (4) on-site medical services; (5) ambulance services; and (6) off-site medical services. The authors argue that adapting and applying this framework in the context of MPEs in general, and music festivals specifically, has the potential to break down the current disconnected approach to event safety, security, health, and emergency planning. It offers a means of shifting the focus from a purely reactive stance to a more proactive, collaborative, and integrated approach. Improving health outcomes for music festival attendees, reducing gaps in planning, promoting consistency, and improving efficiency by reducing duplication of services will ultimately require coordination and collaboration from the beginning of event production to post-event reporting. Lund A , Turris SA . The Event Chain of Survival in the context of music festivals: a framework for improving outcomes at major planned events. Prehosp Disaster Med. 2017;32(4):437-443.

Closing the delivery gaps in pediatric HIV care in Togo, West Africa: using the care delivery value chain framework to direct quality improvement.

PubMed

Fiori, Kevin; Schechter, Jennifer; Dey, Monica; Braganza, Sandra; Rhatigan, Joseph; Houndenou, Spero; Gbeleou, Christophe; Palerbo, Emmanuel; Tchangani, Elfamozo; Lopez, Andrew; Bensen, Emily; Hirschhorn, Lisa R

2016-03-01

Providing quality care for all children living with HIV/AIDS remains a global challenge and requires the development of new healthcare delivery strategies. The care delivery value chain (CDVC) is a framework that maps activities required to provide effective and responsive care for a patient with a particular disease across the continuum of care. By mapping activities along a value chain, the CDVC enables managers to better allocate resources, improve communication, and coordinate activities. We report on the successful application of the CDVC as a strategy to optimize care delivery and inform quality improvement (QI) efforts with the overall aim of improving care for Pediatric HIV patients in Togo, West Africa. Over the course of 12 months, 13 distinct QI activities in Pediatric HIV/AIDS care delivery were monitored, and 11 of those activities met or exceeded established targets. Examples included: increase in infants receiving routine polymerase chain reaction testing at 2 months (39-95%), increase in HIV exposed children receiving confirmatory HIV testing at 18 months (67-100%), and increase in patients receiving initial CD4 testing within 3 months of HIV diagnosis (67-100%). The CDVC was an effective approach for evaluating existing systems and prioritizing gaps in delivery for QI over the full cycle of Pediatric HIV/AIDS care in three specific ways: (1) facilitating the first comprehensive mapping of Pediatric HIV/AIDS services, (2) identifying gaps in available services, and (3) catalyzing the creation of a responsive QI plan. The CDVC provided a framework to drive meaningful, strategic action to improve Pediatric HIV care in Togo.

Factors Affecting Availability of Essential Medicines among Community Health Workers in Ethiopia, Malawi, and Rwanda: Solving the Last Mile Puzzle

PubMed Central

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K.; Williams, Timothy

2012-01-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation. PMID:23136287

Factors affecting availability of essential medicines among community health workers in Ethiopia, Malawi, and Rwanda: solving the last mile puzzle.

PubMed

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K; Williams, Timothy

2012-11-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation.

Greenhouse gas emission accounting and management of low-carbon community.

PubMed

Song, Dan; Su, Meirong; Yang, Jin; Chen, Bin

2012-01-01

As the major source of greenhouse gas (GHG) emission, cities have been under tremendous pressure of energy conservation and emission reduction for decades. Community is the main unit of urban housing, public facilities, transportation, and other properties of city's land use. The construction of low-carbon community is an important pathway to realize carbon emission mitigation in the context of rapid urbanization. Therefore, an efficient carbon accounting framework should be proposed for CO₂ emissions mitigation at a subcity level. Based on life-cycle analysis (LCA), a three-tier accounting framework for the carbon emissions of the community is put forward, including emissions from direct fossil fuel combustion, purchased energy (electricity, heat, and water), and supply chain emissions embodied in the consumption of goods. By compiling a detailed CO₂ emission inventory, the magnitude of carbon emissions and the mitigation potential in a typical high-quality community in Beijing are quantified within the accounting framework proposed. Results show that emissions from supply chain emissions embodied in the consumption of goods cannot be ignored. Specific suggestions are also provided for the urban decision makers to achieve the optimal resource allocation and further promotion of low-carbon communities.

Greenhouse Gas Emission Accounting and Management of Low-Carbon Community

PubMed Central

Song, Dan; Su, Meirong; Yang, Jin; Chen, Bin

2012-01-01

As the major source of greenhouse gas (GHG) emission, cities have been under tremendous pressure of energy conservation and emission reduction for decades. Community is the main unit of urban housing, public facilities, transportation, and other properties of city's land use. The construction of low-carbon community is an important pathway to realize carbon emission mitigation in the context of rapid urbanization. Therefore, an efficient carbon accounting framework should be proposed for CO2 emissions mitigation at a subcity level. Based on life-cycle analysis (LCA), a three-tier accounting framework for the carbon emissions of the community is put forward, including emissions from direct fossil fuel combustion, purchased energy (electricity, heat, and water), and supply chain emissions embodied in the consumption of goods. By compiling a detailed CO2 emission inventory, the magnitude of carbon emissions and the mitigation potential in a typical high-quality community in Beijing are quantified within the accounting framework proposed. Results show that emissions from supply chain emissions embodied in the consumption of goods cannot be ignored. Specific suggestions are also provided for the urban decision makers to achieve the optimal resource allocation and further promotion of low-carbon communities. PMID:23251104

"The nurse satisfaction, service quality and nurse retention chain": implications for management of recruitment and retention.

PubMed

Newman, Karin; Maylor, Uvanney; Chansarkar, Bal

2002-01-01

This paper presents the findings of a qualitative study, based on interviews with over 130 nurses and midwives in four London Trust hospitals on: the main factors influencing nurse satisfaction and retention; empirical support for the robustness of a conceptual framework or model "the nurse satisfaction, service quality and nurse retention chain"; and some managerial considerations for recruitment and retention. The three main factors influencing job satisfaction were patients, the inherent characteristics of nursing and the nursing team; the two main sources of job dissatisfaction were staff shortages and poor management and amongst nurse retention strategies improving working conditions was more important than increased pay. For recruitment, as well as retention, improving the image and reputation of nursing along with improvements in work-life balance were pre-requisites for meeting the challenging target of an additional 20,000 nurses on the wards by 2004.

Implementation of supply chain business application through business model canvas and waterfall framework collaborations for fish farmers SMEs in ulekan market bandung

NASA Astrophysics Data System (ADS)

Priyadi, Y.; Prasetio, A.

2018-03-01

This research resulted in the development of e-SCM application, in small-scale group of fish farmers based on Open Source technology in Ulekan Market Bandung, by collaborating the implementation of e-SCM and Data Management. Then proceed with the application of supply chain business through collaboration Business Model Canvas and Waterfall Framework. For the design of business process reengineering in this activity, it produces a context diagram called e-SCM SME Fish consisting of five entities directly involved with the system, namely: fish shop supervisor, fish shop retailer, employees, fish farmers, and customers. Referring to the Context Diagram, decomposition process of Level 0 e-SCM SMEs Fish. The decomposition results in Data Flow Diagram Level 1 for four sub processes, namely: business partners, transactions, retailer stock, and documentation. Result of nine blocks on Business Model Canvas on e-SCM activity, its category consist of Priority 1, Priority 2, Direct, Indirect, Purchase/e-SCM, Transactional, Community, Asset Sale, Physical Asset, Human, Production, Strategic Alliance -competitors, Coopetition, Buyer supplier relationship, Fixed Cost, Variable Cost. For integration of data management on Localhost Server media on e-SCM using http://whyphi: 8080 address, as prototype which will soon be adopted by farmer fish farmer.

A unique substituted Co(II)-formate coordination framework exhibits weak ferromagnetic single-chain-magnet like behavior.

PubMed

Zhao, Jiong-Peng; Yang, Qian; Liu, Zhong-Yi; Zhao, Ran; Hu, Bo-Wen; Du, Miao; Chang, Ze; Bu, Xian-He

2012-07-04

A magnetic isolated chain-based substituted cobalt-formate framework was obtained with isonicotine as a spacer. In the chain, canted antiferromagnetic interactions exist in between the Co(II) ions, and slow magnetic relaxation is detected at low temperature. For the block effects of the isonicotine ligands, the complex could be considered as a peculiar example of a weak ferromagnetic single-chain-magnet.

[Blood transfusion and supply chain management safety].

PubMed

Quaranta, Jean-François; Caldani, Cyril; Cabaud, Jean-Jacques; Chavarin, Patricia; Rochette-Eribon, Sandrine

2015-02-01

The level of safety attained in blood transfusion now makes this a discipline better managed care activities. This was achieved both by scientific advances and policy decisions regulating and supervising the activity, as well as by the quality system, which we recall that affects the entire organizational structure, responsibilities, procedures, processes and resources in place to achieve quality management. So, an effective quality system provides a framework within which activities are established, performed in a quality-focused way and continuously monitored to improve outcomes. This system quality has to irrigate all the actors of the transfusion, just as much the establishments of blood transfusion than the health establishments. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

A Framework of Multi Objectives Negotiation for Dynamic Supply Chain Model

NASA Astrophysics Data System (ADS)

Chai, Jia Yee; Sakaguchi, Tatsuhiko; Shirase, Keiichi

Trends of globalization and advances in Information Technology (IT) have created opportunity in collaborative manufacturing across national borders. A dynamic supply chain utilizes these advances to enable more flexibility in business cooperation. This research proposes a concurrent decision making framework for a three echelons dynamic supply chain model. The dynamic supply chain is formed by autonomous negotiation among agents based on multi agents approach. Instead of generating negotiation aspects (such as amount, price and due date) arbitrary, this framework proposes to utilize the information available at operational level of an organization in order to generate realistic negotiation aspect. The effectiveness of the proposed model is demonstrated by various case studies.

Mapping Risks of Indonesian Tuna Supply Chain

NASA Astrophysics Data System (ADS)

Karningsih, P. D.; Anggrahini, D.; Kurniati, N.; Suef, M.; Fachrur, A. R.; Syahroni, N.

2018-04-01

Due to its high economic value and is produced by many countries, Tuna is considered as one of the world’s popular fish. Demand for Tuna species are very high and it usually sells in three form: fresh, frozen or canned. Competition in Tuna trading is challengin with the potential risk of price and supply fluctuations. With recent focus of Indonesia government that see the future of Indonesia civilization depend on the oceans and as the three biggest Tuna producing country, Ministry of Marine Affairs and Fisheries should ensure sustainability and competitiveness of Indonesian tuna. Therefore, there is a great need to develop a proper and effective strategy to manage potential risks in Indonesian Tuna supply chain. This paper is aimed at identifying and mapping potential Tuna supply chain risks and its interrelationships that would assist government in determining proper strategies to manage Indonesian Tuna. A framework for identifying Tuna supply chain risks is proposed. Generic risk structure of Supply Chain Risk Identification System is adopted and modified to match with particular object, which is Indonesian Tuna. The proposed model consists of hierarchical and causal structure that encompass potential risks of Tuna supply chain operations from fishing, trading, processing and distribution. The causal structure consist of risk events and its risk agents which is the cause of risk events. To ensure the root cause of risk events are identified properly, five why’s analysis is utilized to obtain risk agents. This proposed model also captures risk interrelationship between internal and external environment of Tuna supply chain. Preliminary result of this study identifies 15 risk events and 13 risk factors on fishing and trading operations and maps their interrelationships.

Cadre de planification integree de la chaine logistique pour la gestion et l'evaluation de strategies de bioraffinage forestier

NASA Astrophysics Data System (ADS)

Dansereau, Louis Patrick

Biorefining is now recognized as a promising solution to transform the struggling forestry industry and to generate value-added pathways. The implementation of new products and processes will help companies to diversify revenues, but implies several strategic changes in the business model. Companies will face the dilemma of exiting or not traditional pulp and paper operations, while selecting their biorefinery product and process portfolio. As well, they will have to enter new markets and manage production to minimize the risk of market volatility. Over the past decades, both industry and academia paid a lot of attention to supply-chain management in order to increase the cost effectiveness of overall operations. The application of supply-chain management concepts could therefore greatly help the transforming North American forestry industry to compete globally. The objective of this Ph.D. project was to propose and illustrate an integrated supply-chain planning framework for the management and the evaluation of forest biorefinery strategies. This framework, named margins-based , integrates principles from revenue management, activity-based cost accounting, and manufacturing flexibility in a tactical planning model that maximizes profit of a company. The structure of the mathematical model and its associated cost model aims to represent as closely as possible the activities of a company, from procurement to sales. It enables the modeling of different process configurations leading to manufacturing flexibility. The model can thus be used as a platform for evaluating various operating strategies of a company, at both production and supply-chain levels. A case study of a newsprint mill implementing a parallel biomass fractionation line producing several bioproducts was used to illustrate this margins-based approach. Various strategic and tactical analyses were conducted to show the relevance of the approach as a decision-making tool for management problems related to the forest biorefinery. The model was used to evaluate the profitability of a company during its transformation to the biorefinery, by considering the gradual divestment in pulp and paper activities, while implementing a new biorefinery process. Results show that the tool can enhance decision-making activities by providing a better visualization and better comprehension of supply-chain and cost-related dynamics under different scenarios. Coupled with a scenario analysis, it offers the opportunity to develop a phased implementation strategy that would stabilize profitability during the transformation to the biorefinery. The planning tool was also used to study the management of a product portfolio to mitigate the risk of market volatility. One analysis focused on the exploitation of thermomechanical and deinked pulping flexibility in order to minimize the cost of raw material procurement in different to market conditions. Another analysis examined the impact of feedstock and production flexibility of a fractionation process on sales and profitability. Results show that the procurement and production needed to manufacture the product mix that provides the optimum margins vary significantly. Biorefinery processes can have complex interrelations that make dynamics and trade-offs between manufacturing options not easy to identify and understand. Results thus highlight the relevance of using such planning tools to identify the best opportunities. In a context where sales can be varied to a certain level, results also show that it may be beneficial to pay more for certain types of biomass if they offer a product portfolio mix with higher revenues.

Performance improvement: an active life cycle product management

NASA Astrophysics Data System (ADS)

Cucchiella, Federica; Gastaldi, Massimo; Lenny Koh, S. C.

2010-03-01

The management of the supply chain has gained importance in many manufacturing firms. Operational flexibility can be considered a crucial weapon to increase competitiveness in a turbulent marketplace. It reflects the ability of a firm to properly and rapidly respond to a variable and dynamic environment. For the firm operating in a fashion sector, the management of the supply chain is even more complex because the product life cycle is shorter than that of the firm operating in a non-fashion sector. The increase of firm flexibility level can be reached through the application of the real option theory inside the firm network. In fact, real option may increase the project value by allowing managers to more efficiently direct the production. The real option application usually analysed in literature does not take into account that the demands of products are well-defined by the product life cycle. Working on a fashion sector, the life cycle pattern is even more relevant because of an expected demand that grows according to a constant rate that does not capture the demand dynamics of the underlying fashion goods. Thus, the primary research objective of this article is to develop a model useful for the management of investments in a supply chain operating in a fashion sector where the system complexity is increased by the low level of unpredictability and stability that is proper of the mood phenomenon. Moreover, unlike the traditional model, a real option framework is presented here that considers fashion product characterised by uncertain stages of the production cycle.

The Study of an Integrated Rating System for Supplier Quality Performance in the Semiconductor Industry

NASA Astrophysics Data System (ADS)

Lee, Yu-Cheng; Yen, Tieh-Min; Tsai, Chih-Hung

This study provides an integrated model of Supplier Quality Performance Assesment (SQPA) activity for the semiconductor industry through introducing the ISO 9001 management framework, Importance-Performance Analysis (IPA) Supplier Quality Performance Assesment and Taguchi`s Signal-to-Noise Ratio (S/N) techniques. This integrated model provides a SQPA methodology to create value for all members under mutual cooperation and trust in the supply chain. This method helps organizations build a complete SQPA framework, linking organizational objectives and SQPA activities to optimize rating techniques to promote supplier quality improvement. The techniques used in SQPA activities are easily understood. A case involving a design house is illustrated to show our model.

EUMIS - an open portal framework for interoperable marine environmental services

NASA Astrophysics Data System (ADS)

Hamre, T.; Sandven, S.; Leadbetter, A.; Gouriou, V.; Dunne, D.; Grant, M.; Treguer, M.; Torget, Ø.

2012-04-01

NETMAR (Open service network for marine environmental data) is an FP7 project that aims to develop a pilot European Marine Information System (EUMIS) for searching, downloading and integrating satellite, in situ and model data from ocean and coastal areas. EUMIS will use a semantic framework coupled with ontologies for identifying and accessing distributed data, such as near-real time, forecast and historical data. Four pilots have been defined to clarify the needs for satellite, in situ and model based products and services in selected user communities. The pilots are: · Pilot 1: Arctic Sea Ice Monitoring and Forecasting · Pilot 2: Oil spill drift forecast and shoreline cleanup assessment services in France · Pilot 3: Ocean colour - Marine Ecosystem, Research and Monitoring · Pilot 4: International Coastal Atlas Network (ICAN) for coastal zone management NETMAR is developing a set of data delivery services for the targeted user communities by means of standard web-GIS and OPeNDAP protocols. Processing services and adaptive service chaining services will also be developed, to enable users to generate new products suited to their needs. Both data retrieved from online repositories as well as the products generated dynamically can be accessed and visualised in the EUMIS portal. For this purpose, a GIS Viewer, a Service Chaining Editor and a Ontology Browser/Discovery Client have been developed and integrated in EUMIS. The EUMIS portal is developed using a portal framework that is compliant with the JSR-168 (Java Portlet Specification 1.0) and JSR-286 (Java Portlet Specification, 2.0) standards. These standards defines the interface (contract) and lifecycle management for a portal system component, a portlet, which can be implemented in a number of programming languages, not only Java. The GIS Viewer is developed using a combination of Java, JavaScript and JSF (e.g. MapFaces). The Service chaining editor is implemented in JavaScript (using different libraries like jQuery and WireIt), and the Ontology Browser/Discovery Client by means of Adobe Flex. In addition to the portlets developed in the project, we have also used several of the pre-built portlets that come with the Liferay Community Edition portal framework, notably the wiki, forum and RSS feed portlets. The presentation will focus on the developed system components and show some examples of products and services from the defined pilots.

Institutionalization of Reduction of Total Ownership Costs (R-TOC) Principles. Part 1: Lessons Learned from Special Interest Programs

DTIC Science & Technology

2010-12-01

Life Cycle Cost Process Model (Austin, TX: The Consortium for Advanced Management International) 6 November 2009. 8 The framework begins with...Hendricks, James R. Involving the Extended Value Chain in a Target Costing/ Life Cycle Cost Process Model. Austin, TX: The Consortium for Advanced ...can have on reducing ownership costs in hundreds of other DOD programs. The early life -cycle phases (requirements/concept development) are often the

The innovation value chain.

PubMed

Hansen, Morten T; Birkinshaw, Julian

2007-06-01

The challenges of coming up with fresh ideas and realizing profits from them are different for every company. One firm may excel at finding good ideas but may have weak systems for bringing them to market. Another organization may have a terrific process for funding and rolling out new products and services but a shortage of concepts to develop. In this article, Hansen and Birkinshaw caution executives against using the latest and greatest innovation approaches and tools without understanding the unique deficiencies in their companies' innovation systems. They offer a framework for evaluating innovation performance: the innovation value chain. It comprises the three main phases of innovation (idea generation, conversion, and diffusion) as well as the critical activities performed during those phases (looking for ideas inside your unit; looking for them in other units; looking for them externally; selecting ideas; funding them; and promoting and spreading ideas companywide). Using this framework, managers get an end-to-end view of their innovation efforts. They can pinpoint their weakest links and tailor innovation best practices appropriately to strengthen those links. Companies typically succumb to one of three broad "weakest-link" scenarios. They are idea poor, conversion poor, or diffusion poor. The article looks at the ways smart companies - including Intuit, P&G, Sara Lee, Shell, and Siemens- modify the best innovation practices and apply them to address those organizations' individual needs and flaws. The authors warn that adopting the chain-based view of innovation requires new measures of what can be delivered by each link in the chain. The approach also entails new roles for employees "external scouts" and "internal evangelists," for example. Indeed, in their search for new hires, companies should seek out those candidates who can help address particular weaknesses in the innovation value chain.

Time-based management of patient processes.

PubMed

Kujala, Jaakko; Lillrank, Paul; Kronström, Virpi; Peltokorpi, Antti

2006-01-01

The purpose of this paper is to present a conceptual framework that would enable the effective application of time based competition (TBC) and work in process (WIP) concepts in the design and management of effective and efficient patient processes. This paper discusses the applicability of time-based competition and work-in-progress concepts to the design and management of healthcare service production processes. A conceptual framework is derived from the analysis of both existing research and empirical case studies. The paper finds that a patient episode is analogous to a customer order-to-delivery chain in industry. The effective application of TBC and WIP can be achieved by focusing on through put time of a patient episode by reducing the non-value adding time components and by minimizing time categories that are main cost drivers for all stakeholders involved in the patient episode. The paper shows that an application of TBC in managing patient processes can be limited if there is no consensus about optimal care episode in the medical community. In the paper it is shown that managing patient processes based on time and cost analysis enables one to allocate the optimal amount of resources, which would allow a healthcare system to minimize the total cost of specific episodes of illness. Analysing the total cost of patient episodes can provide useful information in the allocation of limited resources among multiple patient processes. This paper introduces a framework for health care managers and researchers to analyze the effect of reducing through put time to the total cost of patient episodes.

Innovation value chain capability in Malaysian-owned company: A theoretical framework

NASA Astrophysics Data System (ADS)

Abidin, Norkisme Zainal; Suradi, Nur Riza Mohd

2014-09-01

Good quality products or services are no longer adequate to guarantee the sustainability of a company in the present competitive business. Prior research has developed various innovation models with the hope to better understand the innovativeness of the company. Due to countless definitions, indicators, factors, parameter and approaches in the study of innovation, it is difficult to ensure which one will best suit the Malaysian-owned company innovativeness. This paper aims to provide a theoretical background to support the framework of the innovation value chain capability in Malaysian-owned Company. The theoretical framework was based on the literature reviews, expert interviews and focus group study. The framework will be used to predict and assess the innovation value chain capability in Malaysian-owned company.

Squaring the circle of healthcare supplies.

PubMed

Böhme, Tillmann; Williams, Sharon; Childerhouse, Paul; Deakins, Eric; Towill, Denis

2014-01-01

The purpose of this paper is to use a systems lens to assess the comparative performance of healthcare supply chains and provide guidance for their improvement. A well-established and rigorous multi-method audit methodology, based on the uncertainty circle model, yields an objective assessment of value stream performance in eight Australasian public sector hospitals. Cause-effect analysis identifies the major barriers to achieving smooth, seamless flows. Potentially high-leverage remedial actions identified using systems thinking are examined with the aid of an exemplar case. The majority of the healthcare value streams studied are underperforming compared with those in the European automotive industry. Every public hospital appears to be caught in the grip of vicious circles of system uncertainty, in large part being caused by problems of their own making. The single exception is making good progress towards seamless functional integration, which has been achieved by elevating supply chain management to a core competence; having a clearly articulated supply chain vision; adopting a systems approach; and, managing supplies with accurate information. The small number of cases limits the generalisability of the findings at this time. Hospital supply chain managers endeavouring to achieve smooth and seamless supply flows should attempt to elevate the status of supplies management within their organisation to that of a core competence, and should use accurate information to manage their value streams holistically as a set of interwoven processes. A four-level prism model is proposed as a useful framework for thus improving healthcare supply delivery systems. Material flow concepts originally developed to provide objective assessments of value stream performance in commercial settings are adapted for use in a healthcare setting. The ability to identify exemplar organisations via a context-free uncertainty measure, and to use systems thinking to identify high-leverage solutions, supports the transfer of appropriate best practices even between organisations in dissimilar business and economic settings.

A tale of five cities: Using recycling frameworks to analyse inclusive recycling performance.

PubMed

Scheinberg, Anne; Simpson, Michael

2015-11-01

'Recycling' is a source of much confusion, particularly when comparing solid waste systems in high-income countries with those in low- and middle-income countries. Few analysts can explain why the performance and structure of recycling appears to be so different in rich countries from poor ones, nor why well-meaning efforts to implement recycling so often fail. The analysis of policy drivers, and the Integrated Sustainable Waste Management (ISWM) framework, come close to an explanation.This article builds on these earlier works, focusing in on five cities profiled in the 2010 UN-Habitat publication (Scheinberg A, Wilson DC and Rodic L (2010) Solid Waste Management in the World's Cities. UN-Habitat's Third Global Report on the State of Water and Sanitation in the World's Cities. Newcastle-on-Tyne, UK: Earthscan Publications). Data from these cities and others provides the basis for developing a new tool to analyse inclusive recycling performance. The points of departure are the institutional and economic relationships between the service chain, the public obligation to remove waste, pollution, and other forms of disvalue, and the value chain, a system of private enterprises trading valuable materials and providing markets for recyclables. The methodological innovation is to use flows of materials and money as indicators of institutional relationships, and is an extension of process flow diagramming.The authors are using the term 'recycling framework analysis' to describe this new form of institutional analysis. The diagrams increase our understanding of the factors that contribute to high-performance inclusive recycling. By focusing on institutional relationships, the article seeks to improve analysis, planning, and ultimately, outcomes, of recycling interventions. © The Author(s) 2015.

Sustainable Supply Chain Design by the P-Graph Framework

EPA Science Inventory

The present work proposes a computer-aided methodology for designing sustainable supply chains in terms of sustainability metrics by resorting to the P-graph framework. The methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the ...

Using Civilian Supply Chain Management Best Practices to Improve Army Supply Chain Management Procedures

DTIC Science & Technology

2017-06-09

USING CIVILIAN SUPPLY CHAIN MANAGEMENT BEST PRACTICES TO IMPROVE ARMY SUPPLY CHAIN MANAGEMENT PROCEDURES A thesis presented to......Army Supply Chain Management Procedures 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Chief Warrant

Multidimensional competences of supply chain managers: an empirical study

NASA Astrophysics Data System (ADS)

Shou, Yongyi; Wang, Weijiao

2017-01-01

Supply chain manager competences have attracted increasing attention from both practitioners and scholars in recent years. This paper conducted an explorative study to understand the dimensionality of supply chain manager competences. Online job advertisements for supply chain managers were collected as secondary data, since these advertisements reflect employers' real job requirements. We adopted the multidimensional scaling (MDS) technique to process and analyse the data. Five dimensions of supply chain manager competences are identified: generic skills, functional skills, supply chain management (SCM) qualifications and leadership, SCM expertise, and industry-specific and senior management skills. Statistic tests indicate that supply chain manager competence saliences vary in different industries and regions.

Construction of Chained True Score Equipercentile Equatings under the Kernel Equating (KE) Framework and Their Relationship to Levine True Score Equating. Research Report. ETS RR-09-24

ERIC Educational Resources Information Center

Chen, Haiwen; Holland, Paul

2009-01-01

In this paper, we develop a new chained equipercentile equating procedure for the nonequivalent groups with anchor test (NEAT) design under the assumptions of the classical test theory model. This new equating is named chained true score equipercentile equating. We also apply the kernel equating framework to this equating design, resulting in a…

ASPEN Version 3.0

NASA Technical Reports Server (NTRS)

Rabideau, Gregg; Chien, Steve; Knight, Russell; Schaffer, Steven; Tran, Daniel; Cichy, Benjamin; Sherwood, Robert

2006-01-01

The Automated Scheduling and Planning Environment (ASPEN) computer program has been updated to version 3.0. ASPEN is a modular, reconfigurable, application software framework for solving batch problems that involve reasoning about time, activities, states, and resources. Applications of ASPEN can include planning spacecraft missions, scheduling of personnel, and managing supply chains, inventories, and production lines. ASPEN 3.0 can be customized for a wide range of applications and for a variety of computing environments that include various central processing units and random access memories.

Synthesis of Sustainable Energy Supply Chain by the P-Graph Framework

EPA Science Inventory

The present work proposes a computer-aided methodology for designing sustainable supply chains in terms of sustainability metrics by utilizing the P-graph framework. The methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the U.S...

Coupled ecosystem/supply chain modelling of fish products from sea to shelf: the Peruvian anchoveta case.

PubMed

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities.

Coupled Ecosystem/Supply Chain Modelling of Fish Products from Sea to Shelf: The Peruvian Anchoveta Case

PubMed Central

Avadí, Angel; Fréon, Pierre; Tam, Jorge

2014-01-01

Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities. PMID:25003196

Bayesian inversion of seismic and electromagnetic data for marine gas reservoir characterization using multi-chain Markov chain Monte Carlo sampling

NASA Astrophysics Data System (ADS)

Ren, Huiying; Ray, Jaideep; Hou, Zhangshuan; Huang, Maoyi; Bao, Jie; Swiler, Laura

2017-12-01

In this study we developed an efficient Bayesian inversion framework for interpreting marine seismic Amplitude Versus Angle and Controlled-Source Electromagnetic data for marine reservoir characterization. The framework uses a multi-chain Markov-chain Monte Carlo sampler, which is a hybrid of DiffeRential Evolution Adaptive Metropolis and Adaptive Metropolis samplers. The inversion framework is tested by estimating reservoir-fluid saturations and porosity based on marine seismic and Controlled-Source Electromagnetic data. The multi-chain Markov-chain Monte Carlo is scalable in terms of the number of chains, and is useful for computationally demanding Bayesian model calibration in scientific and engineering problems. As a demonstration, the approach is used to efficiently and accurately estimate the porosity and saturations in a representative layered synthetic reservoir. The results indicate that the seismic Amplitude Versus Angle and Controlled-Source Electromagnetic joint inversion provides better estimation of reservoir saturations than the seismic Amplitude Versus Angle only inversion, especially for the parameters in deep layers. The performance of the inversion approach for various levels of noise in observational data was evaluated - reasonable estimates can be obtained with noise levels up to 25%. Sampling efficiency due to the use of multiple chains was also checked and was found to have almost linear scalability.

Developing weighted criteria to evaluate lean reverse logistics through analytical network process

NASA Astrophysics Data System (ADS)

Zagloel, Teuku Yuri M.; Hakim, Inaki Maulida; Krisnawardhani, Rike Adyartie

2017-11-01

Reverse logistics is a part of supply chain that bring materials from consumers back to manufacturer in order to gain added value or do a proper disposal. Nowadays, most companies are still facing several problems on reverse logistics implementation which leads to high waste along reverse logistics processes. In order to overcome this problem, Madsen [Framework for Reverse Lean Logistics to Enable Green Manufacturing, Eco Design 2009: 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Sapporo, 2009] has developed a lean reverse logistics framework as a step to eliminate waste by implementing lean on reverse logistics. However, the resulted framework sets aside criteria used to evaluate its performance. This research aims to determine weighted criteria that can be used as a base on reverse logistics evaluation by considering lean principles. The resulted criteria will ensure reverse logistics are kept off from waste, thus implemented efficiently. Analytical Network Process (ANP) is used in this research to determine the weighted criteria. The result shows that criteria used for evaluation lean reverse logistics are Innovation and Learning (35%), Economic (30%), Process Flow Management (14%), Customer Relationship Management (13%), Environment (6%), and Social (2%).

High thermal stability and antiferromagnetic properties of a 3D Mn(II)-organic framework with metal carboxylate chains

NASA Astrophysics Data System (ADS)

Han, Lei; Zhou, Yan; Wang, Xiu-Teng; Li, Xing; Tong, Ming-Liang

2009-04-01

A novel three-dimensional metal-organic framework, [Mn 2(hfipbb) 2(bpy)] n ( 1) (H 2hfipbb = 4,4'-(hexafluoroisopropylidene)bis(benzoic acid), bpy = 4,4'-bipyridine), has been hydrothermally synthesized and structurally characterized. The complex consists of metal carboxylate chains, which are cross-linked to six adjacent chains through organic moieties forming extended three-dimensional networks. Complex 1 exhibits high thermal stability (450 °C) and antiferromagnetic properties.

A rational framework for production decision making in blood establishments.

PubMed

Ramoa, Augusto; Maia, Salomé; Lourenço, Anália

2012-07-24

SAD_BaSe is a blood bank data analysis software, created to assist in the management of blood donations and the blood production chain in blood establishments. In particular, the system keeps track of several collection and production indicators, enables the definition of collection and production strategies, and the measurement of quality indicators required by the Quality Management System regulating the general operation of blood establishments. This paper describes the general scenario of blood establishments and its main requirements in terms of data management and analysis. It presents the architecture of SAD_BaSe and identifies its main contributions. Specifically, it brings forward the generation of customized reports driven by decision making needs and the use of data mining techniques in the analysis of donor suspensions and donation discards.

A Rational Framework for Production Decision Making in Blood Establishments.

PubMed

Ramoa, Augusto; Maia, Salomé; Lourenço, Anália

2012-12-01

SAD_BaSe is a blood bank data analysis software, created to assist in the management of blood donations and the blood production chain in blood establishments. In particular, the system keeps track of several collection and production indicators, enables the definition of collection and production strategies, and the measurement of quality indicators required by the Quality Management System regulating the general operation of blood establishments. This paper describes the general scenario of blood establishments and its main requirements in terms of data management and analysis. It presents the architecture of SAD_BaSe and identifies its main contributions. Specifically, it brings forward the generation of customized reports driven by decision making needs and the use of data mining techniques in the analysis of donor suspensions and donation discards.

Mapping of Supply Chain Learning: A Framework for SMEs

ERIC Educational Resources Information Center

Thakkar, Jitesh; Kanda, Arun; Deshmukh, S. G.

2011-01-01

Purpose: The aim of this paper is to propose a mapping framework for evaluating supply chain learning potential for the context of small- to medium-sized enterprises (SMEs). Design/methodology/approach: The extracts of recently completed case based research for ten manufacturing SME units and facts reported in the previous research are utilized…

On Governance, Embedding and Marketing: Reflections on the Construction of Alternative Sustainable Food Networks.

PubMed

Roep, Dirk; Wiskerke, Johannes S C

Based on the reconstruction of the development of 14 food supply chain initiatives in 7 European countries, we developed a conceptual framework that demonstrates that the process of increasing the sustainability of food supply chains is rooted in strategic choices regarding governance , embedding, and marketing and in the coordination of these three dimensions that are inextricably interrelated. The framework also shows that when seeking to further develop an initiative (e.g., through scaling up or product diversification) these interrelations need continuous rebalancing. We argue that the framework can serve different purposes: it can be used as an analytical tool by researchers studying food supply chain dynamics, as a policy tool by policymakers that want to support the development of sustainable food supply chains, and as a reflexive tool by practitioners and their advisors to help them to position themselves, develop a clear strategy, find the right allies, develop their skills, and build the capacities that they need. In this paper, we elaborate upon the latter function of the framework and illustrate this briefly with empirical evidence from three of the initiatives that we studied.

Bayesian inversion of seismic and electromagnetic data for marine gas reservoir characterization using multi-chain Markov chain Monte Carlo sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Huiying; Ray, Jaideep; Hou, Zhangshuan

In this study we developed an efficient Bayesian inversion framework for interpreting marine seismic amplitude versus angle (AVA) and controlled source electromagnetic (CSEM) data for marine reservoir characterization. The framework uses a multi-chain Markov-chain Monte Carlo (MCMC) sampler, which is a hybrid of DiffeRential Evolution Adaptive Metropolis (DREAM) and Adaptive Metropolis (AM) samplers. The inversion framework is tested by estimating reservoir-fluid saturations and porosity based on marine seismic and CSEM data. The multi-chain MCMC is scalable in terms of the number of chains, and is useful for computationally demanding Bayesian model calibration in scientific and engineering problems. As a demonstration,more » the approach is used to efficiently and accurately estimate the porosity and saturations in a representative layered synthetic reservoir. The results indicate that the seismic AVA and CSEM joint inversion provides better estimation of reservoir saturations than the seismic AVA-only inversion, especially for the parameters in deep layers. The performance of the inversion approach for various levels of noise in observational data was evaluated – reasonable estimates can be obtained with noise levels up to 25%. Sampling efficiency due to the use of multiple chains was also checked and was found to have almost linear scalability.« less

Bayesian inversion of seismic and electromagnetic data for marine gas reservoir characterization using multi-chain Markov chain Monte Carlo sampling

DOE PAGES

Ren, Huiying; Ray, Jaideep; Hou, Zhangshuan; ...

2017-10-17

In this paper we developed an efficient Bayesian inversion framework for interpreting marine seismic Amplitude Versus Angle and Controlled-Source Electromagnetic data for marine reservoir characterization. The framework uses a multi-chain Markov-chain Monte Carlo sampler, which is a hybrid of DiffeRential Evolution Adaptive Metropolis and Adaptive Metropolis samplers. The inversion framework is tested by estimating reservoir-fluid saturations and porosity based on marine seismic and Controlled-Source Electromagnetic data. The multi-chain Markov-chain Monte Carlo is scalable in terms of the number of chains, and is useful for computationally demanding Bayesian model calibration in scientific and engineering problems. As a demonstration, the approach ismore » used to efficiently and accurately estimate the porosity and saturations in a representative layered synthetic reservoir. The results indicate that the seismic Amplitude Versus Angle and Controlled-Source Electromagnetic joint inversion provides better estimation of reservoir saturations than the seismic Amplitude Versus Angle only inversion, especially for the parameters in deep layers. The performance of the inversion approach for various levels of noise in observational data was evaluated — reasonable estimates can be obtained with noise levels up to 25%. Sampling efficiency due to the use of multiple chains was also checked and was found to have almost linear scalability.« less

Bayesian inversion of seismic and electromagnetic data for marine gas reservoir characterization using multi-chain Markov chain Monte Carlo sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Huiying; Ray, Jaideep; Hou, Zhangshuan

In this paper we developed an efficient Bayesian inversion framework for interpreting marine seismic Amplitude Versus Angle and Controlled-Source Electromagnetic data for marine reservoir characterization. The framework uses a multi-chain Markov-chain Monte Carlo sampler, which is a hybrid of DiffeRential Evolution Adaptive Metropolis and Adaptive Metropolis samplers. The inversion framework is tested by estimating reservoir-fluid saturations and porosity based on marine seismic and Controlled-Source Electromagnetic data. The multi-chain Markov-chain Monte Carlo is scalable in terms of the number of chains, and is useful for computationally demanding Bayesian model calibration in scientific and engineering problems. As a demonstration, the approach ismore » used to efficiently and accurately estimate the porosity and saturations in a representative layered synthetic reservoir. The results indicate that the seismic Amplitude Versus Angle and Controlled-Source Electromagnetic joint inversion provides better estimation of reservoir saturations than the seismic Amplitude Versus Angle only inversion, especially for the parameters in deep layers. The performance of the inversion approach for various levels of noise in observational data was evaluated — reasonable estimates can be obtained with noise levels up to 25%. Sampling efficiency due to the use of multiple chains was also checked and was found to have almost linear scalability.« less

Hierarchy Software Development Framework (h-dp-fwk) project

NASA Astrophysics Data System (ADS)

Zaytsev, A.

2010-04-01

Hierarchy Software Development Framework provides a lightweight tool for building portable modular applications for performing automated data analysis tasks in a batch mode. The history of design and development activities devoted to the project has begun in March 2005 and from the very beginning it was targeting the case of building experimental data processing applications for the CMD-3 experiment which is being commissioned at Budker Institute of Nuclear Physics (BINP, Novosibirsk, Russia). Its design addresses the generic case of modular data processing application operating within the well defined distributed computing environment. The main features of the framework are modularity, built-in message and data exchange mechanisms, XInclude and XML schema enabled XML configuration management tools, dedicated log management tools, internal debugging tools, both dynamic and static module chains support, internal DSO version and consistency checking, well defined API for developing specialized frameworks. It is supported on Scientific Linux 4 and 5 and planned to be ported to other platforms as well. The project is provided with the comprehensive set of technical documentation and users' guides. The licensing schema for the source code, binaries and documentation implies that the product is free for non-commercial use. Although the development phase is not over and many features are to be implemented yet the project is considered ready for public use and creating applications in various fields including development of events reconstruction software for small and moderate scale HEP experiments.

Can We Defend the Defense Supply Chain Lessons Learned from Industry Leaders in Supply Chain Management

DTIC Science & Technology

2018-03-01

Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and...chain, including products, services, information , finances, demand, relationships, and risks. In a more complete definition, supply chain management ...CHAIN? LESSONS LEARNED FROM INDUSTRY LEADERS IN SUPPLY CHAIN MANAGEMENT by Ronald H. Menz March 2018 Thesis Co-Advisors: Rodrigo Nieto-Gomez

Study on Green Supply Chain Management Based on Circular Economy

NASA Astrophysics Data System (ADS)

Ying, Jiang; Li-jun, Zhou

The article starts with circular economy and the connotation of green supply chain, then analyzes the difference between green supply chain and traditional supply chain and elaborates the content of green supply chain management. On that basis, the approach to implement green supply chain management in china shall be put forward.

Distributor- Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale.

PubMed

Mehralian, Gholamhossein; Babapour, Jafar; Peiravian, Farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor-retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor-retailer interface.

Distributor– Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale

PubMed Central

Mehralian, Gholamhossein; Babapour, Jafar; peiravian, farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor–retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor–retailer interface. PMID:28243297

Food Crises and Food Safety Incidents in European Union, United States, and Maghreb Area: Current Risk Communication Strategies and New Approaches.

PubMed

Chammem, Nadia; Issaoui, Manel; De Almeida, Ana Isabel Dâmaso; Delgado, Amélia Martins

2018-03-22

Globalization has created a dynamic market, which has dramatically intensified interchanges of goods and information as well as the flow of people among nations. This international phenomenon offers the consumer a choice between a wide variety of foods from diverse locations. However, there are challenges to improving food security and safety on a global scale; the major question is how food safety can be guaranteed while increasing the complexity of food supply chains. A food produced in a certain location usually contains ingredients, additives, and preservatives from different and distant origins. Although countries take several food control measures, their institutional and regulatory frameworks diverge widely, as do the definitions of food crisis, food incidents, and risk management approaches. The present review discusses some past food safety issues and lessons learned. Convergences and differences in the regulatory framework of food control agencies in different regions of the world are herein revealed. Emerging risks are also discussed, particularly the spread of antibiotic resistance in the food chain and the environment, as well as the rise of new antibiotic-resistant pathogenic strains with broader tolerance to environmental factors.

Risk management of hazardous substances in a circular economy.

PubMed

Bodar, Charles; Spijker, Job; Lijzen, Johannes; Waaijers-van der Loop, Susanne; Luit, Richard; Heugens, Evelyn; Janssen, Martien; Wassenaar, Pim; Traas, Theo

2018-04-15

The ambitions for a circular economy are high and unambiguous, but day-to-day experience shows that the transition still has many difficulties to overcome. One of the current hurdles is the presence of hazardous substances in waste streams that enter or re-enter into the environment or the technosphere. The key question is: do we have the appropriate risk management tools to control any risks that might arise from the re-using and recycling of materials? We present some recent cases that illustrate current practice and complexity in the risk management of newly-formed circular economy chains. We also highlight how separate legal frameworks are still disconnected from each other in these cases, and how circular economy initiatives interlink with the European REACH regulation. Furthermore, we introduce a novel scheme describing how to decide whether a(n)(additional) risk assessment is necessary with regard to the re-use of materials containing hazardous substances. Finally, we present our initial views on new concepts for the fundamental integration of sustainability and safety aspects. These concepts should be the building blocks for the near future shifts in both policy frameworks and voluntary initiatives that support a sound circular economy transition. Copyright © 2018 Elsevier Ltd. All rights reserved.

Foundations of Supply Chain Management for Space Application

NASA Technical Reports Server (NTRS)

Galluzzi, Michael; Zapata, Edgar; Steele, Martin; De Weck, Olivier

2006-01-01

Supply Chain Management (SCM) is a key piece of the framework for America's space technology investment as the National Aeronautics and Space Administration (NASA), the aerospace industry, and international partners embark on a bold new vision of human and robotic space exploration beyond Low-Earth-Orbit (LEO). This type of investment is driven by the Agency's need for cost efficient operational support associated with, processing and operating space vehicles and address many of the biggest operational challenge including extremely tight funding profiles, seamless program-to-program transition activities and the reduction of the time gap with human spaceflight capabilities in the post-Shuttle era. An investment of this magnitude is a multiyear task and must include new patterns of thought within the engineering community to respect the importance of SCM and the integration of the material and information flow. Experience within the Department of Defense and commercial sectors which has shown that support cost reductions and or avoidances of upwards to 35% over business as usual are achievable. It is SCM that will ultimately bring the solar system within the economic sphere of our society.

The Mycotox Charter: Increasing Awareness of, and Concerted Action for, Minimizing Mycotoxin Exposure Worldwide.

PubMed

Logrieco, Antonio F; Miller, J David; Eskola, Mari; Krska, Rudolf; Ayalew, Amare; Bandyopadhyay, Ranajit; Battilani, Paola; Bhatnagar, Deepak; Chulze, Sofia; De Saeger, Sarah; Li, Peiwu; Perrone, Giancarlo; Poapolathep, Amnart; Rahayu, Endang S; Shephard, Gordon S; Stepman, François; Zhang, Hao; Leslie, John F

2018-04-04

Mycotoxins are major food contaminants affecting global food security, especially in low and middle-income countries. The European Union (EU) funded project, MycoKey, focuses on “Integrated and innovative key actions for mycotoxin management in the food and feed chains” and the right to safe food through mycotoxin management strategies and regulation, which are fundamental to minimizing the unequal access to safe and sufficient food worldwide. As part of the MycoKey project, a Mycotoxin Charter (charter.mycokey.eu) was launched to share the need for global harmonization of mycotoxin legislation and policies and to minimize human and animal exposure worldwide, with particular attention to less developed countries that lack effective legislation. This document is in response to a demand that has built through previous European Framework Projects—MycoGlobe and MycoRed—in the previous decade to control and reduce mycotoxin contamination worldwide. All suppliers, participants and beneficiaries of the food supply chain, for example, farmers, consumers, stakeholders, researchers, members of civil society and government and so forth, are invited to sign this charter and to support this initiative.

Establishing a regulatory value chain model: An innovative approach to strengthening medicines regulatory systems in resource-constrained settings.

PubMed

Chahal, Harinder Singh; Kashfipour, Farrah; Susko, Matt; Feachem, Neelam Sekhri; Boyle, Colin

2016-05-01

Medicines Regulatory Authorities (MRAs) are an essential part of national health systems and are charged with protecting and promoting public health through regulation of medicines. However, MRAs in resource-constrained settings often struggle to provide effective oversight of market entry and use of health commodities. This paper proposes a regulatory value chain model (RVCM) that policymakers and regulators can use as a conceptual framework to guide investments aimed at strengthening regulatory systems. The RVCM incorporates nine core functions of MRAs into five modules: (i) clear guidelines and requirements; (ii) control of clinical trials; (iii) market authorization of medical products; (iv) pre-market quality control; and (v) post-market activities. Application of the RVCM allows national stakeholders to identify and prioritize investments according to where they can add the most value to the regulatory process. Depending on the economy, capacity, and needs of a country, some functions can be elevated to a regional or supranational level, while others can be maintained at the national level. In contrast to a "one size fits all" approach to regulation in which each country manages the full regulatory process at the national level, the RVCM encourages leveraging the expertise and capabilities of other MRAs where shared processes strengthen regulation. This value chain approach provides a framework for policymakers to maximize investment impact while striving to reach the goal of safe, affordable, and rapidly accessible medicines for all.

Study of China green supply chain management policies and standard

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxin; Huang, Jin; Lin, Ling

2017-11-01

With the highlight of the environment issues, manufacturing industry needs to be environmentally managed with integrated methods in system aspect. Green supply chain management, integrating the environment aspect into each step of the implement of supply chain management, is the key measure to improve the efficiency of environmental management and to remit the pollution. It also helps to make best use and configuration of the resources and has been attracting much attention from our government, enterprises and academia in recent years. This paper introduced the definition and content of green supply chain management, concluded the research progress of green supply chain management by domestic scholars, stated the characteristic and achievement of the implement of green supply chain management in China as well as analyzed the current existing problems and suggestions in the future.

Integration of vaccine supply chains with other health commodity supply chains: a framework for decision making.

PubMed

Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel

2014-11-28

One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

Halal Supply Chain Management Streamlined Practices: Issues and Challenges

NASA Astrophysics Data System (ADS)

Hijrah Abd Kadir, Muhammad; Zuraidah Raja Mohd Rasi, Raja; Omar, Siti Sarah; Manap, Zariq Imran Abdul

2016-11-01

The quickly developing worldwide halal in business sector has given a remarkable window of chance, which empowers Malaysia to the renowned halal centre in worldwide (known as Halal-hubs). Malaysia also has proactively taken a lead in halal activities, which is presently considered as the benchmark for a halal framework worldwide. Malaysia also set up the Halal Industry Development Corporation (HDC) which driving a wide range of halal activities since the demand of halal food has increased significantly which is very crucial for a Muslim in ensuring its authenticity and integrity. Even in parallel to this developments, many studies has been conducted because there are many issues still occurs in the food industry. The issue of consumer awareness and understanding the halal principles, mixing of halal and non- halal products, halal certification and logo compliance with Shariah law and lack of regulation and enforcement need the serious attention by all parties along the supply chain. The challenges occur mainly in the halal food segregation and halal traceability of the products. The unit of analysis in this study different halal stakeholders group which are JAKIM, Halal Development Centre (HDC), Raw Material Manufacturers, Retailers and Government Agencies. This paper attempt discusses the issues and challenges occurs in the halal supply chain and faced by the practitioners as well as the relevant parties involved in the industry especially for food products manufacturers. The study would like to give a basic information about the issues and challenges in the contribution of Halal Supply Chain Management (HSCM) as well as for the future studies.

Multi-criteria decision support framework for sustainable implementation of effective green supply chain management practices.

PubMed

Boutkhoum, Omar; Hanine, Mohamed; Boukhriss, Hicham; Agouti, Tarik; Tikniouine, Abdessadek

2016-01-01

At present, environmental issues become real critical barriers for many supply chain corporations concerning the sustainability of their businesses. In this context, several studies have been proposed from both academia and industry trying to develop new measurements related to green supply chain management (GSCM) practices to overcome these barriers, which will help create new environmental strategies, implementing those practices in their manufacturing processes. The objective of this study is to present the technical and analytical contribution that multi-criteria decision making analysis (MCDA) can bring to environmental decision making problems, and especially to GSCM field. For this reason, a multi-criteria decision-making methodology, combining fuzzy analytical hierarchy process and fuzzy technique for order preference by similarity to ideal solution (fuzzy TOPSIS), is proposed to contribute to a better understanding of new sustainable strategies through the identification and evaluation of the most appropriate GSCM practices to be adopted by industrial organizations. The fuzzy AHP process is used to construct hierarchies of the influential criteria, and then identify the importance weights of the selected criteria, while the fuzzy TOPSIS process employs these weighted criteria as inputs to evaluate and measure the performance of each alternative. To illustrate the effectiveness and performance of our MCDA approach, we have applied it to a chemical industry corporation located in Safi, Morocco.

Don't break the chain: importance of supply chain management in the operating room setting.

PubMed

Bilyk, Candis

2008-09-01

Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

An Open Data Platform in the framework of the EGI-LifeWatch Competence Center

NASA Astrophysics Data System (ADS)

Aguilar Gómez, Fernando; de Lucas, Jesús Marco; Yaiza Rodríguez Marrero, Ana

2016-04-01

The working pilot of an Open Data Platform supporting the full data cycle in research is presented. It aims to preserve knowledge explicitly, starting with the description of the Case Studies, and integrating data and software management and preservation on equal basis. The uninterrupted support in the chain starts at the data acquisition level and covers up to the support for reuse and publication in an open framework, providing integrity and provenance controls. The Lifewatch Open Science Framework is a pilot web portal developed in collaboration with different commercial companies that tries to enrich and integrate different data lifecycle-related tools in order to address the management of the different steps: data planning, gathering, storing, curation, preservation, sharing, discovering, etc. To achieve this goal, the platform includes the following features: -Data Management Planning. Tool to set up an structure of the data, including what data will be generated, how it will be exploited, re-used, curated, preserved, etc. It has a semantic approach: includes reference to ontologies in order to express what data will be gathered. -Close to instrumentation. The portal includes a distributed storage system that can be used both for storing data from instruments and output data from analysis. All that data can be shared -Analysis. Resources from EGI Federated Cloud are accessible within the portal, so that users can exploit computing resources to perform analysis and other processes, including workflows. -Preservation. Data can be preserved in different systems and DOIs can be minted not only for datasets but also for software, DMPs, etc. The presentation will show the different components of the framework as well as how it can be extrapolated to other communities.

An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management

DTIC Science & Technology

2010-12-01

An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management ______________________________________ By...Report 4. TITLE AND SUBTITLE: An Analysis of United States Marine Corps Enlisted Entry-Level Training Using Supply Chain and Operations Management 6...Level Training; United States Marine Corps; Operations Management ; Supply Chain Management; Process Analysis 16. PRICE CODE 17. SECURITY

Meteorological risks are drivers of environmental innovation in agro-ecosystem management

NASA Astrophysics Data System (ADS)

Gobin, Anne; Van de Vyver, Hans; Vanwindekens, Frédéric; Planchon, Viviane; Verspecht, Ann; Frutos de Cachorro, Julia; Buysse, Jeroen

2016-04-01

Extreme weather events such as droughts, heat waves and rain storms are projected to increase both in frequency and magnitude with climate change. The research hypothesis of the MERINOVA project is that meteorological risks act as drivers of environmental innovation in agro-ecosystem management which is being tested using a chain of risk approach. The project comprises of five major parts that reflect the chain of risks: the hazard, its impact on different agro-ecosystems, vulnerability, risk management and risk communication. Generalized Extreme Value (GEV) theory was used to model annual maxima of meteorological variables based on a location-, scale- and shape-parameter that determine the center of the distribution, the deviation of the location-parameter and the upper tail decay, respectively. Spatial interpolation of GEV-derived return levels has yielded maps of temperature extremes, precipitation deficits and wet periods. The degree of temporal overlap between extreme weather conditions and sensitive periods in the agro-ecosystem was determined using a bio-physically based modelling framework that couples phenological models, a soil water balance, crop growth and environmental models. 20-year return values for frost, heat stress, drought, waterlogging and field access during different crop stages were related to arable yields. The spatial extent of vulnerability is developed on different layers of spatial information that include inter alia meteorology, soil-landscapes, crop cover and management. The level of vulnerability and resilience of an agro-ecosystem is also determined by risk management. The types of agricultural risk and their relative importance differ across sectors and farm types as elucidated by questionnaires and focus groups. Risk types are distinguished according to production, market, institutional, financial and liability risks. A portfolio of potential strategies was identified at farm, market and policy level. In conclusion, MERINOVA provides for a robust and flexible framework by demonstrating its performance across Belgian agro-ecosystems, and by ensuring its relevance to policy makers and practitioners. A strong expert and end-user network is established to help disseminate and exploit project results to meet user needs.

Using concept mapping to design an indicator framework for addiction treatment centres.

PubMed

Nabitz, Udo; van Den Brink, Wim; Jansen, Paul

2005-06-01

The objective of this study is to determine an indicator framework for addiction treatment centres based on the demands of stakeholders and in alignment with the European Foundation for Quality Management (EFQM) Excellence Model. The setting is the Jellinek Centre based in Amsterdam, the Netherlands, which serves as a prototype for an addiction treatment centre. Concept mapping was used in the construction of the indicator framework. During the 1-day workshop, 16 stakeholders generated, prioritized and sorted 73 items concerning quality and performance. Multidimensional scaling and cluster analysis was applied in constructing a framework consisting of two dimensions and eight clusters. The horizontal axis of the indicator framework is named 'Organization' and has two poles, namely, 'Processes' and 'Results'. The vertical axis is named ' Task' and the poles are named 'Efficient treatment' and 'Prevention programs'. The eight clusters in the two-dimensional framework are arranged in the following, prioritized sequence: 'Efficient treatment network', 'Effective service', ' Target group', 'Quality of life', 'Efficient service', 'Knowledge transfer', 'Reducing addiction related problems', and 'Prevention programs'. The most important items in the framework are: 'patients are satisfied with their treatment', 'early interventions', and 'efficient treatment chain'. The indicator framework aligns with three clusters of the results criteria of the EFQM Excellence Model. It is based on the stakeholders' perspectives and is believed to be specific for addiction treatment centres. The study demonstrates that concept mapping is a suitable strategy for generating indicator frameworks.

Evaluation and selection of sustainable suppliers in supply chain using new GP-DEA model with imprecise data

NASA Astrophysics Data System (ADS)

Jafarzadeh Ghoushchi, Saeid; Dodkanloi Milan, Mehran; Jahangoshai Rezaee, Mustafa

2017-11-01

Nowadays, with respect to knowledge growth about enterprise sustainability, sustainable supplier selection is considered a vital factor in sustainable supply chain management. On the other hand, usually in real problems, the data are imprecise. One method that is helpful for the evaluation and selection of the sustainable supplier and has the ability to use a variety of data types is data envelopment analysis (DEA). In the present article, first, the supplier efficiency is measured with respect to all economic, social and environmental dimensions using DEA and applying imprecise data. Then, to have a general evaluation of the suppliers, the DEA model is developed using imprecise data based on goal programming (GP). Integrating the set of criteria changes the new model into a coherent framework for sustainable supplier selection. Moreover, employing this model in a multilateral sustainable supplier selection can be an incentive for the suppliers to move towards environmental, social and economic activities. Improving environmental, economic and social performance will mean improving the supply chain performance. Finally, the application of the proposed approach is presented with a real dataset.

Amine-controlled assembly of metal-sulfite architecture from 1D chains to 3D framework.

PubMed

Austria, Cristina; Zhang, Jian; Valle, Henry; Zhang, Qichun; Chew, Emily; Nguyen, Dan-Tam; Gu, J Y; Feng, Pingyun; Bu, Xianhui

2007-08-06

Whereas open-framework materials have been made in a variety of chemical compositions, few are known in which 3-connected SO3(2)- anions serve as basic building units. Here, we report four new metal-sulfite polymeric structures, (ZnSO3)Py (1, py = pyridine), (ZnSO3)2(2,2'-bipy)H2O (2, 2,2'-bipy = 2,2'-bipyridine), (ZnSO3)2(TMDPy) (3, TMDPy = 4,4'-trimethylenedipyridine), and (MnSO3)2en (4, en = ethylenediamine) that have been synthesized hydrothermally and structurally characterized. In these compounds, low-dimensional 1D and 2D inorganic subunits are assembled into higher 2D or 3D covalent frameworks by organic ligands. In addition to the structure-directing effect of organic ligands, the flexible coordination chemistry of Zn2+ and SO3(2)- also contributes to the observed structural diversity. In compounds 1-3, Zn2+ sites alternate with trigonal pyramidal SO3(2)- anions to form three types of [ZnSO3]n chains, whereas in compound 4, a 2D-corrugated [MnSO3]n layer is present. Compound 1 features a rail-like chain with pendant pyridine rings. The pi-pi interaction between 2,2'-bipy ligands is found between adjacent chains in compound 2, resulting in 2D sheets that are further stacked through interlayer hydrogen bonds. Compound 3 exhibits a very interesting inorganic [(ZnSO3)2]n chain constructed from two chairlike subunits, and such chains are bridged by TMDPy ligands into a 2D sheet. In compound 4, side-by-side helical chains permeate through 2D-corrugated [MnSO3]n layers, which are pillared by neutral ethylenediamine molecules into a 3D framework that can be topologically represented as a (3,6)-connected net. The results presented here illustrate the rich structural chemistry of metal-sulfites and the potential of sulfite anions as a unique structural building block for the construction of novel open-framework materials, in particular, those containing polymeric inorganic subunits that may have interesting physical properties such as low-dimensional magnetism or electronic properties.

Requirements of supply chain management in differentiating European pork chains.

PubMed

Trienekens, Jacques; Wognum, Nel

2013-11-01

This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

Information flow in the pharmaceutical supply chain.

PubMed

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

Extending the "Knowledge Advantage": Creating Learning Chains

ERIC Educational Resources Information Center

Maqsood, Tayyab; Walker, Derek; Finegan, Andrew

2007-01-01

Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…

76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

Identifying a correlated spin fluctuation in an entangled spin chain subject to a quantum phase transition.

PubMed

Shimizu, Kaoru; Tokura, Yasuhiro

2015-12-01

This paper presents a theoretical framework for analyzing the quantum fluctuation properties of a quantum spin chain subject to a quantum phase transition. We can quantify the fluctuation properties by examining the correlation between the fluctuations of two neighboring spins subject to the quantum uncertainty. To do this, we first compute the reduced density matrix ρ of the spin pair from the ground state |Ψ⟩ of a spin chain, and then identify the quantum correlation part ρ(q) embedded in ρ. If the spin chain is translationally symmetric and characterized by a nearest-neighbor two-body spin interaction, we can determine uniquely the form of ρ(q) as W|Φ〉〈Φ| with the weight W ≤1, and quantify the fluctuation properties using the two-spin entangled state |Φ〉. We demonstrate the framework for a transverse-field quantum Ising spin chain and indicate its validity for more general spin chain models.

Commitment to and preparedness for sustainable supply chain management in the oil and gas industry.

PubMed

Wan Ahmad, Wan Nurul K; Rezaei, Jafar; Tavasszy, Lóránt A; de Brito, Marisa P

2016-09-15

Our current dependency on the oil and gas (O&G) industry for economic development and social activities necessitates research into the sustainability of the industry's supply chains. At present, studies on sustainable supply chain management (SSCM) practices in the industry do not include firm-internal factors that affect the sustainability strategies employed by different functional areas of its supply chains. Our study aims to address this gap by identifying the relevant internal factors and exploring their relationship with SSCM strategies. Specifically, we discuss the commitment to and preparedness for sustainable practices of companies that operate in upstream and downstream O&G supply chain. We study the impact of these factors on their sustainability strategies of four key supply chain functions: supplier management, production management, product stewardship and logistics management. The analyses of data collected through a survey among 81 companies show that management preparedness may enhance sustainable supply chain strategies in the O&G industry more than commitment does. Among the preparedness measures, management of supply chain operational risks is found to be vital to the sustainability of all supply chain functions except for production management practices. The findings also highlight the central importance of supplier and logistics management to the achievement of sustainable O&G supply chains. Companies must also develop an organizational culture that encourages, for example, team collaboration and proactive behaviour to finding innovative sustainability solutions in order to translate commitment to sustainable practices into actions that can produce actual difference to their SSCM practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Consensus achievement of leadership, organisational and individual factors that influence safety climate: Implications for nursing management.

PubMed

Fischer, Shelly A; Jones, Jacqueline; Verran, Joyce A

2018-01-01

To validate a framework of factors that influence the relationship of transformational leadership and safety climate, and to enable testing of safety chain factors by generating hypotheses regarding their mediating and moderating effects. Understanding the patient safety chain and mechanisms by which leaders affect a strong climate of safety is essential to transformational leadership practice, education, and research. A systematic review of leadership and safety literature was used to develop an organising framework of factors proposed to influence the climate of safety. A panel of 25 international experts in leadership and safety engaged a three-round modified Delphi study with Likert-scored surveys. Eighty per cent of participating experts from six countries were retained to the final survey round. Consensus (>66% agreement) was achieved on 40 factors believed to influence safety climate in the acute care setting. Consensus regarding specific factors that play important roles in an organisation's climate of safety can be reached. Generally, the demonstration of leadership commitment to safety is key to cultivating a culture of patient safety. Transformational nurse leaders should consider and employ all three categories of factors in daily leadership activities and decision-making to drive a strong climate of patient safety. © 2017 John Wiley & Sons Ltd.

Master's Degree in Management Information Systems with a Supply Chain Management Focus

ERIC Educational Resources Information Center

Ramaswamy, Kizhanatham V.; Boyd, Joseph L.; Desai, Mayur

2007-01-01

A graduate curriculum in Management Information Systems with a Supply Chain Management focus is presented. The motivation for this endeavor stems from the fact that the global scope of modern business organizations and the competitive environment in which they operate, requires an information system leveraged supply chain management system (SCM)…

A climate robust integrated modelling framework for regional impact assessment of climate change

NASA Astrophysics Data System (ADS)

Janssen, Gijs; Bakker, Alexander; van Ek, Remco; Groot, Annemarie; Kroes, Joop; Kuiper, Marijn; Schipper, Peter; van Walsum, Paul; Wamelink, Wieger; Mol, Janet

2013-04-01

Decision making towards climate proofing the water management of regional catchments can benefit greatly from the availability of a climate robust integrated modelling framework, capable of a consistent assessment of climate change impacts on the various interests present in the catchments. In the Netherlands, much effort has been devoted to developing state-of-the-art regional dynamic groundwater models with a very high spatial resolution (25x25 m2). Still, these models are not completely satisfactory to decision makers because the modelling concepts do not take into account feedbacks between meteorology, vegetation/crop growth, and hydrology. This introduces uncertainties in forecasting the effects of climate change on groundwater, surface water, agricultural yields, and development of groundwater dependent terrestrial ecosystems. These uncertainties add to the uncertainties about the predictions on climate change itself. In order to create an integrated, climate robust modelling framework, we coupled existing model codes on hydrology, agriculture and nature that are currently in use at the different research institutes in the Netherlands. The modelling framework consists of the model codes MODFLOW (groundwater flow), MetaSWAP (vadose zone), WOFOST (crop growth), SMART2-SUMO2 (soil-vegetation) and NTM3 (nature valuation). MODFLOW, MetaSWAP and WOFOST are coupled online (i.e. exchange information on time step basis). Thus, changes in meteorology and CO2-concentrations affect crop growth and feedbacks between crop growth, vadose zone water movement and groundwater recharge are accounted for. The model chain WOFOST-MetaSWAP-MODFLOW generates hydrological input for the ecological prediction model combination SMART2-SUMO2-NTM3. The modelling framework was used to support the regional water management decision making process in the 267 km2 Baakse Beek-Veengoot catchment in the east of the Netherlands. Computations were performed for regionalized 30-year climate change scenarios developed by KNMI for precipitation and reference evapotranspiration according to Penman-Monteith. Special focus in the project was on the role of uncertainty. How valid is the information that is generated by this modelling framework? What are the most important uncertainties of the input data, how do they affect the results of the model chain and how can the uncertainties of the data, results, and model concepts be quantified and communicated? Besides these technical issues, an important part of the study was devoted to the perception of stakeholders. Stakeholder analysis and additional working sessions yielded insight into how the models, their results and the uncertainties are perceived, how the modelling framework and results connect to the stakeholders' information demands and what kind of additional information is needed for adequate support on decision making.

Improving the Reverse Logistics Respecting Principles of Sustainable Development in an Industrial Company

NASA Astrophysics Data System (ADS)

Fidlerová, Helena; Mĺkva, Miroslava

2016-06-01

Reverse logistics, the movement of materials back up the supply chain, is recognised by many organisations as an opportunity for adding value. The paper considers the theoretical framework and the conception of reverse logistics in literature and practice. The objective of the article is to propose tangible solutions which eliminate the imbalances in reverse logistics and improve the waste management in the company. The case study focuses on the improvement in the process of waste packaging in the context of sustainable development as a part of reverse logistics in the surveyed industrial company in Slovakia.

River and Wetland Food Webs in Australia's Wet-Dry Tropics: General Principles and Implications for Management.

NASA Astrophysics Data System (ADS)

Douglas, M. M.; Bunn, S. E.; Davies, P. M.

2005-05-01

The tropical rivers of northern Australia are internationally recognised for their high ecological and cultural values. They have largely unmodified flow regimes and are comparatively free of the impacts associated with intensive land use. However, there is growing demand for agricultural development and existing pressures, such as weeds and feral animals, threaten their ecological integrity. Using the international literature to provide a conceptual framework and drawing on limited published and unpublished data on rivers in northern Australia, we have derived five general principles about food webs and related ecosystem processes that both characterise tropical rivers of northern Australia and have important implications for their management. These are: (1) Seasonal hydrology is a strong driver of ecosystem processes and food web structure; (2) Hydrological connectivity is largely intact and underpins important terrestrial-aquatic food web subsidies; (3) River and wetland food webs are strongly dependent on algal production; (4) A few common macroconsumers species have a strong influence on benthic food webs; (5) Omnivory is widespread and food chains are short. These principles have implications for the management and protection of tropical rivers and wetlands of northern Australia and provide a framework for the formation of testable hypotheses in future research programs.

Information flow in the pharmaceutical supply chain

PubMed Central

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead. PMID:26664401

Stakeholders Integration in Higher Education: Supply Chain Approach

ERIC Educational Resources Information Center

Al-Turki, U. M.; Duffuaa, S.; Ayar, T.; Demirel, O.

2008-01-01

Supply chain management principles have emerged in the last decade as a strategic option to meet new challenges in global business environment. Viewing business environment as part of a chain, starting from raw material suppliers to end customers passing by producers, is at the heart of supply-chain management. Many management principles have…

A Review of Theoretical Frameworks for Supply Chain Integration

NASA Astrophysics Data System (ADS)

Thoo, AC; Tan, LC; Sulaiman, Z.; Zakuan, N.

2017-06-01

In a world of fierce competition and business driven by speed to market, good quality and low costs, this environment requires firms to have a source of competitive advantage that is inimitable and non-substitutable. For a supply chain integration (SCI) strategy to achieve sustainable competitive advantage it must be non-substitutable, inimitable, path-dependent and developed over time. Also, an integrated supply chain framework is needed to tie the whole network together in order to reduce perennial supply chain challenges such as functional silos, poor transparency of knowledge and information and the inadequate formation of appropriate customer and supplier relationships. Therefore, this paper aims to evaluate the competitive impact of a SCI strategy on firm performance using the theory of Resource-based View (RBV) and relational view.

A framework using cluster-based hybrid network architecture for collaborative virtual surgery.

PubMed

Qin, Jing; Choi, Kup-Sze; Poon, Wai-Sang; Heng, Pheng-Ann

2009-12-01

Research on collaborative virtual environments (CVEs) opens the opportunity for simulating the cooperative work in surgical operations. It is however a challenging task to implement a high performance collaborative surgical simulation system because of the difficulty in maintaining state consistency with minimum network latencies, especially when sophisticated deformable models and haptics are involved. In this paper, an integrated framework using cluster-based hybrid network architecture is proposed to support collaborative virtual surgery. Multicast transmission is employed to transmit updated information among participants in order to reduce network latencies, while system consistency is maintained by an administrative server. Reliable multicast is implemented using distributed message acknowledgment based on cluster cooperation and sliding window technique. The robustness of the framework is guaranteed by the failure detection chain which enables smooth transition when participants join and leave the collaboration, including normal and involuntary leaving. Communication overhead is further reduced by implementing a number of management approaches such as computational policies and collaborative mechanisms. The feasibility of the proposed framework is demonstrated by successfully extending an existing standalone orthopedic surgery trainer into a collaborative simulation system. A series of experiments have been conducted to evaluate the system performance. The results demonstrate that the proposed framework is capable of supporting collaborative surgical simulation.

A Multiobjective Optimization Framework for Online Stochastic Optimal Control in Hybrid Electric Vehicles

DOE PAGES

Malikopoulos, Andreas

2015-01-01

The increasing urgency to extract additional efficiency from hybrid propulsion systems has led to the development of advanced power management control algorithms. In this paper we address the problem of online optimization of the supervisory power management control in parallel hybrid electric vehicles (HEVs). We model HEV operation as a controlled Markov chain and we show that the control policy yielding the Pareto optimal solution minimizes online the long-run expected average cost per unit time criterion. The effectiveness of the proposed solution is validated through simulation and compared to the solution derived with dynamic programming using the average cost criterion.more » Both solutions achieved the same cumulative fuel consumption demonstrating that the online Pareto control policy is an optimal control policy.« less

An Analysis of the Impact of RFID Technology on Inventory Systems

NASA Astrophysics Data System (ADS)

Rekik, Yacine

Nowadays, most enterprises undertake large investments in order to implement information systems that support decision making for managing inventories. Nevertheless, if data collected from the physical processes used to feed these systems are not correct, there will be severe impacts on business performance. Inventory inaccuracy occurs when the inventory level in the Information System is not in agreement with the physically available inventory. In this chapter, we first describe the major factors generating inventory inaccuracy. Then, we provide situations permitting to manage an inventory system subject to errors. We provide a framework to model the inventory inaccuracy issue and focus on the impact of advanced identification systems, such as that provided by RFID technology, in improving the performance of a supply chain subject to inventory inaccuracies.

Supply chain management: new paradigms for customers and suppliers.

PubMed

Garwood, D

1999-02-01

Companies are constantly looking for ways to increase their effectiveness and improve their bottom lines. One area of renewed interest is supply chain management. By managing their supply chains better, companies are able to become more flexible, offer defect-free products, eliminate unnecessary delays, and keep costs down. This article briefly describes the objectives of supply chain management and lists some of the tools that can be used to achieve them.

Open-Source ERP: Is It Ripe for Use in Teaching Supply Chain Management?

ERIC Educational Resources Information Center

Huynh, Minh Q.; Chu, Hung W.

2011-01-01

The field of supply chain management has changed greatly and rapidly. With the advent of enterprise systems, supply chains are now operating with up-to-the-minute information. The value of the information flow is marked by speed, accessibility, accuracy, and most of all relevancy. As it continually evolves, the supply chain management curriculum…

The dynamics of commissioning across organisational and clinical boundaries.

PubMed

Baxter, Kate; Weiss, Marjorie; Le Grand, Julian

2008-01-01

The purpose of the paper is to investigate the inter- and intra-organisational relationships in the commissioning of secondary care by primary care trusts in England, using a principal-agent framework. The methodology is a qualitative study of three case studies. A total of 13 commissioning-related meetings were observed. In total, 21 managers and six consultant surgeons were interviewed. There are a number of different levels at which contractual and managerial control take place. Different strengths of control at one level can affect willingness to comply with agreements at other levels. Agreements at one level do not necessarily result in appropriate or expected action at another. The system for commissioning in the National Health Service (NHS) has changed with the introduction of payment by results and practice-based commissioning. However, the dynamics of the inter- and intra-organisational relationships studied remain. Incentives within organisations are as important as those between organisations. Within a chain of principal-agent relations, it is important that a strong link in the chain does not result in the exploitation of weaknesses in other links. If government targets and frameworks are to be met through commissioning, it may be advantageous to concentrate efforts on developing incentives that align clinician with NHS trust objectives as well as NHS trust with primary care trust (PCT) and government objectives. This paper is based on original empirical work. It uses a principal-agent framework to understand the relationships between PCTs and NHS trusts and highlights the importance of internal NHS trust governance systems in the fulfilment of commissioning agreements.

The application of supply chain management principles to emergency management logistics: An empirical study.

PubMed

Peterson, Matthew R; Young, Richard R; Gordon, Gary A

2016-01-01

Key elements of supply chain theory remain relevant to emergency management (EM) logistics activities. The Supply Chain Operations Reference model can also serve as a useful template for the planning, organizing, and execution of EM logistics. Through a series of case studies (developed through intensive survey of organizations and individuals responsible for EM), the authors identified the extent supply chain theory is being adopted and whether the theory was useful for emergency logistics managers. The authors found several drivers that influence the likelihood of an organization to implement elements of supply chain management: the frequency of events, organizational resources, population density, range of events, and severity of the disaster or emergency.

Risk management abilities in multimodal maritime supply chains: Visibility and control perspectives.

PubMed

Vilko, Jyri; Ritala, Paavo; Hallikas, Jukka

2016-11-29

Supply chain complexity and disintegration lead to increased uncertainty from a stakeholders' perspective, which is emerging as one of the major challenges of risk management. The ability to identify risks has weakened, as the responsibility of supply chain risk management is handed over to outside service providers. Regardless, the risks, their visibility and their impact depend on the position of the companies in the supply chain. The actors in the chain must therefore collaborate to create effective risk management conditions. This challenging situation is especially pronounced in multimodal maritime supply chains, where the risks and actor focality are high. This paper contributes to current risk management literature by providing a holistic and systemic view of risk visibility and control in maritime supply chains. The study employs broad-based, qualitative interview data collected from actors operating in southern Finland and the Gulf of Finland as well as an expert-panel assessment of the related risk management abilities. The results show a high level of variance in the level of risk identification and visibility between the actors in question. This further suggests that collaboration in supply chain risk management is essential, as an awareness of the risks and their control mechanisms do not necessarily reside in the same company. Copyright © 2016 Elsevier Ltd. All rights reserved.

75 FR 29307 - Web Based Supply Chain Management Commodity Offer Form, Paperwork Collection Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [Doc. No FV10-CP-01, AMS-FV-10-0041] Web... collection request is required for the implementation of a new system named Web Based Supply Chain Management...-2782. Mail: David Tuckwiller, Project Manager, Web Based Supply Chain Management System, Agricultural...

Traceability and Risk Analysis Strategies for Addressing Counterfeit Electronics in Supply Chains for Complex Systems.

PubMed

DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor

2016-10-01

Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience. © 2016 Society for Risk Analysis.

Quantitative risk stratification in Markov chains with limiting conditional distributions.

PubMed

Chan, David C; Pollett, Philip K; Weinstein, Milton C

2009-01-01

Many clinical decisions require patient risk stratification. The authors introduce the concept of limiting conditional distributions, which describe the equilibrium proportion of surviving patients occupying each disease state in a Markov chain with death. Such distributions can quantitatively describe risk stratification. The authors first establish conditions for the existence of a positive limiting conditional distribution in a general Markov chain and describe a framework for risk stratification using the limiting conditional distribution. They then apply their framework to a clinical example of a treatment indicated for high-risk patients, first to infer the risk of patients selected for treatment in clinical trials and then to predict the outcomes of expanding treatment to other populations of risk. For the general chain, a positive limiting conditional distribution exists only if patients in the earliest state have the lowest combined risk of progression or death. The authors show that in their general framework, outcomes and population risk are interchangeable. For the clinical example, they estimate that previous clinical trials have selected the upper quintile of patient risk for this treatment, but they also show that expanded treatment would weakly dominate this degree of targeted treatment, and universal treatment may be cost-effective. Limiting conditional distributions exist in most Markov models of progressive diseases and are well suited to represent risk stratification quantitatively. This framework can characterize patient risk in clinical trials and predict outcomes for other populations of risk.

A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties

NASA Astrophysics Data System (ADS)

Biermann, D.; Gausemeier, J.; Heim, H.-P.; Hess, S.; Petersen, M.; Ries, A.; Wagner, T.

2014-05-01

In this contribution a framework for the computer-aided planning and optimisation of functional graded components is presented. The framework is divided into three modules - the "Component Description", the "Expert System" for the synthetisation of several process chains and the "Modelling and Process Chain Optimisation". The Component Description module enhances a standard computer-aided design (CAD) model by a voxel-based representation of the graded properties. The Expert System synthesises process steps stored in the knowledge base to generate several alternative process chains. Each process chain is capable of producing components according to the enhanced CAD model and usually consists of a sequence of heating-, cooling-, and forming processes. The dependencies between the component and the applied manufacturing processes as well as between the processes themselves need to be considered. The Expert System utilises an ontology for that purpose. The ontology represents all dependencies in a structured way and connects the information of the knowledge base via relations. The third module performs the evaluation of the generated process chains. To accomplish this, the parameters of each process are optimised with respect to the component specification, whereby the result of the best parameterisation is used as representative value. Finally, the process chain which is capable of manufacturing a functionally graded component in an optimal way regarding to the property distributions of the component description is presented by means of a dedicated specification technique.

Effects of changes along the risk chain on flood risk

NASA Astrophysics Data System (ADS)

Duha Metin, Ayse; Apel, Heiko; Viet Dung, Nguyen; Guse, Björn; Kreibich, Heidi; Schröter, Kai; Vorogushyn, Sergiy; Merz, Bruno

2017-04-01

Interactions of hydrological and socio-economic factors shape flood disaster risk. For this reason, assessment of flood risk ideally takes into account the whole flood risk chain from atmospheric processes, through the catchment and river system processes to the damage mechanisms in the affected areas. Since very different processes at various scales are interacting along the flood risk, the impact of the single components is rather unclear. However for flood risk management, it is required to know the controlling factor of flood damages. The present study, using the flood-prone Mulde catchment in Germany, discusses the sensitivity of flood risk to disturbances along the risk chain: How do disturbances propagate through the risk chain? How do different disturbances combine or conflict and affect flood risk? In this sensitivity analysis, the five components of the flood risk change are included. These are climate, catchment, river system, exposure and vulnerability. A model framework representing the complete risk chain is combined with observational data to understand how the sensitivities evolve along the risk chain by considering three plausible change scenarios for each of five components. The flood risk is calculated by using the Regional Flood Model (RFM) which is based on a continuous simulation approach, including rainfall-runoff, 1D river network, 2D hinterland inundation and damage estimation models. The sensitivity analysis covers more than 240 scenarios with different combinations of the five components. It is investigated how changes in different components affect risk indicators, such as the risk curve and expected annual damage (EAD). In conclusion, it seems that changes in exposure and vulnerability seem to outweigh changes in hazard.

Problem-Based Learning in Instrumentation: Synergism of Real and Virtual Modular Acquisition Chains

ERIC Educational Resources Information Center

Nonclercq, A.; Biest, A. V.; De Cuyper, K.; Leroy, E.; Martinez, D. L.; Robert, F.

2010-01-01

As part of an instrumentation course, a problem-based learning framework was selected for laboratory instruction. Two acquisition chains were designed to help students carry out realistic instrumentation problems. The first tool is a virtual (simulated) modular acquisition chain that allows rapid overall understanding of the main problems in…

Health supply chain management.

PubMed

Zimmerman, Rolf; Gallagher, Pat

2010-01-01

This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.

Teaching Supply Chain Management Complexities: A SCOR Model Based Classroom Simulation

ERIC Educational Resources Information Center

Webb, G. Scott; Thomas, Stephanie P.; Liao-Troth, Sara

2014-01-01

The SCOR (Supply Chain Operations Reference) Model Supply Chain Classroom Simulation is an in-class experiential learning activity that helps students develop a holistic understanding of the processes and challenges of supply chain management. The simulation has broader learning objectives than other supply chain related activities such as the…

Enterprise Sustainment Metrics

DTIC Science & Technology

2015-06-19

Ponte Verde Beach: Supply Chain Management Institute. Lambert, D. M., & Pohlen, T. L. (2014). Supply Chain Metrics. In D. M. Lambert, Supply Chain...Partnerships, Performance (pp. 239-256). Ponte Verde Beach: Supply Chain Management Institute Mills, J. S. (1843). A System of Logic, Ratiocinative and

The P-chain: relating sentence production and its disorders to comprehension and acquisition

PubMed Central

Dell, Gary S.; Chang, Franklin

2014-01-01

This article introduces the P-chain, an emerging framework for theory in psycholinguistics that unifies research on comprehension, production and acquisition. The framework proposes that language processing involves incremental prediction, which is carried out by the production system. Prediction necessarily leads to prediction error, which drives learning, including both adaptive adjustment to the mature language processing system as well as language acquisition. To illustrate the P-chain, we review the Dual-path model of sentence production, a connectionist model that explains structural priming in production and a number of facts about language acquisition. The potential of this and related models for explaining acquired and developmental disorders of sentence production is discussed. PMID:24324238

The P-chain: relating sentence production and its disorders to comprehension and acquisition.

PubMed

Dell, Gary S; Chang, Franklin

2014-01-01

This article introduces the P-chain, an emerging framework for theory in psycholinguistics that unifies research on comprehension, production and acquisition. The framework proposes that language processing involves incremental prediction, which is carried out by the production system. Prediction necessarily leads to prediction error, which drives learning, including both adaptive adjustment to the mature language processing system as well as language acquisition. To illustrate the P-chain, we review the Dual-path model of sentence production, a connectionist model that explains structural priming in production and a number of facts about language acquisition. The potential of this and related models for explaining acquired and developmental disorders of sentence production is discussed.

Development of a Bioinformatics Framework for the Detection of Gene Conversion and the Analysis of Combinatorial Diversity in Immunoglobulin Heavy Chains in Four Cattle Breeds.

PubMed

Walther, Stefanie; Tietze, Manfred; Czerny, Claus-Peter; König, Sven; Diesterbeck, Ulrike S

2016-01-01

We have developed a new bioinformatics framework for the analysis of rearranged bovine heavy chain immunoglobulin (Ig) variable regions by combining and refining widely used alignment algorithms. This bioinformatics framework allowed us to investigate alignments of heavy chain framework regions (FRHs) and the separate alignments of FRHs and heavy chain complementarity determining regions (CDRHs) to determine their germline origin in the four cattle breeds Aubrac, German Black Pied, German Simmental, and Holstein Friesian. Now it is also possible to specifically analyze Ig heavy chains possessing exceptionally long CDR3Hs. In order to gain more insight into breed specific differences in Ig combinatorial diversity, somatic hypermutations and putative gene conversions of IgG, we compared the dominantly transcribed variable (IGHV), diversity (IGHD), and joining (IGHJ) segments and their recombination in the four cattle breeds. The analysis revealed the use of 15 different IGHV segments, 21 IGHD segments, and two IGHJ segments with significant different transcription levels within the breeds. Furthermore, there are preferred rearrangements within the three groups of CDR3H lengths. In the sequences of group 2 (CDR3H lengths (L) of 11-47 amino acid residues (aa)) a higher number of recombination was observed than in sequences of group 1 (L≤10 aa) and 3 (L≥48 aa). The combinatorial diversity of germline IGHV, IGHD, and IGHJ-segments revealed 162 rearrangements that were significantly different. The few preferably rearranged gene segments within group 3 CDR3H regions may indicate specialized antibodies because this length is unique in cattle. The most important finding of this study, which was enabled by using the bioinformatics framework, is the discovery of strong evidence for gene conversion as a rare event using pseudogenes fulfilling all definitions for this particular diversification mechanism.

Development of a Bioinformatics Framework for the Detection of Gene Conversion and the Analysis of Combinatorial Diversity in Immunoglobulin Heavy Chains in Four Cattle Breeds

PubMed Central

Czerny, Claus-Peter; König, Sven; Diesterbeck, Ulrike S.

2016-01-01

We have developed a new bioinformatics framework for the analysis of rearranged bovine heavy chain immunoglobulin (Ig) variable regions by combining and refining widely used alignment algorithms. This bioinformatics framework allowed us to investigate alignments of heavy chain framework regions (FRHs) and the separate alignments of FRHs and heavy chain complementarity determining regions (CDRHs) to determine their germline origin in the four cattle breeds Aubrac, German Black Pied, German Simmental, and Holstein Friesian. Now it is also possible to specifically analyze Ig heavy chains possessing exceptionally long CDR3Hs. In order to gain more insight into breed specific differences in Ig combinatorial diversity, somatic hypermutations and putative gene conversions of IgG, we compared the dominantly transcribed variable (IGHV), diversity (IGHD), and joining (IGHJ) segments and their recombination in the four cattle breeds. The analysis revealed the use of 15 different IGHV segments, 21 IGHD segments, and two IGHJ segments with significant different transcription levels within the breeds. Furthermore, there are preferred rearrangements within the three groups of CDR3H lengths. In the sequences of group 2 (CDR3H lengths (L) of 11–47 amino acid residues (aa)) a higher number of recombination was observed than in sequences of group 1 (L≤10 aa) and 3 (L≥48 aa). The combinatorial diversity of germline IGHV, IGHD, and IGHJ-segments revealed 162 rearrangements that were significantly different. The few preferably rearranged gene segments within group 3 CDR3H regions may indicate specialized antibodies because this length is unique in cattle. The most important finding of this study, which was enabled by using the bioinformatics framework, is the discovery of strong evidence for gene conversion as a rare event using pseudogenes fulfilling all definitions for this particular diversification mechanism. PMID:27828971

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China.

PubMed

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain.

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China

PubMed Central

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain. PMID:26431340

Cultivating a disease management partnership: a value-chain model.

PubMed

Murray, Carolyn F; Monroe, Wendy; Stalder, Sharon A

2003-01-01

Disease management (DM) is one of the health care industry's more innovative value-chain models, whereby multiple relationships are created to bring complex and time-sensitive services to market. The very nature of comprehensive, seamless DM provided through an outsourced arrangement necessitates a level of cooperation, trust, and synergy that may be lacking from more traditional vendor-customer relationships. This discussion highlights the experience of one health plan and its vendor partner and their approach to the development and delivery of an outsourced heart failure (HF) DM program. The program design and rollout are discussed within principles adapted from the theoretical framework of a value-chain model. Within the value-chain model, added value is created by the convergence and synergistic integration of the partners' discrete strengths. Although each partner brings unique attributes to the relationship, those attributes are significantly enhanced by the value-chain model, thus allowing each party to bring the added value of the relationship to their respective customers. This partnership increases innovation, leverages critical capabilities, and improves market responsiveness. Implementing a comprehensive, outsourced DM program is no small task. DM programs incorporate a broad array of services affecting nearly every department in a health plan's organization. When true seamless integration between multiple organizations with multiple stakeholders is the objective, implementation and ongoing operations can become even more complex. To effectively address the complexities presented by an HF DM program, the parties in this case moved beyond a typical purchaser-vendor relationship to one that is more closely akin to a strategic partnership. This discussion highlights the development of this partnership from the perspective of both organizations, as revealed through contracting and implementation activities. It is intended to provide insight into the program development and rollout processes that one health plan and its partner have adopted to advance a DM model that integrates appropriately within the local environment. This discussion also highlights how an organizational culture can shift from an emphasis on cost, growth, and control to an emphasis on quality, innovation, and service within a value-chain model.

Current and new developments in transport and regulatory issues concerning radioisotopes: managing change for minimum business impact

NASA Astrophysics Data System (ADS)

Bennett, Neil; Coppell, David; Rogers, David; Schrader, John

2004-09-01

Changes in the regulatory framework governing the Radiation Processing Industry have the potential to make a real business impact on day-to-day profitability. Many areas of the Radiation Processing Industry are affected by changes in the regulatory framework within which these areas are managed. When planning for such changes the transportation element in the shipment of sealed cobalt radiation sources is an area that is often neglected by some parts of the distribution chain. A balance must be struck between the cobalt supplier and the facility operator/customer that rests upon how much the customer needs to know about the intricacies of cobalt shipment. The objective of this paper is to highlight areas of possible business impact and reassure the users of sealed radiation sources that the global suppliers of these products are used to negotiating local variations in regulations governing the physical transportation of radiation sources, changes in regulations governing the design, manufacture and use of transportation containers and changes in the availability of commercial shippers and shipping routes. The major suppliers of industrial quantities of cobalt-60 are well placed to lead their customers through this complex process as a matter of routine.

Data-based control of a multi-step forming process

NASA Astrophysics Data System (ADS)

Schulte, R.; Frey, P.; Hildenbrand, P.; Vogel, M.; Betz, C.; Lechner, M.; Merklein, M.

2017-09-01

The fourth industrial revolution represents a new stage in the organization and management of the entire value chain. However, concerning the field of forming technology, the fourth industrial revolution has only arrived gradually until now. In order to make a valuable contribution to the digital factory the controlling of a multistage forming process was investigated. Within the framework of the investigation, an abstracted and transferable model is used to outline which data have to be collected, how an interface between the different forming machines can be designed tangible and which control tasks must be fulfilled. The goal of this investigation was to control the subsequent process step based on the data recorded in the first step. The investigated process chain links various metal forming processes, which are typical elements of a multi-step forming process. Data recorded in the first step of the process chain is analyzed and processed for an improved process control of the subsequent process. On the basis of the gained scientific knowledge, it is possible to make forming operations more robust and at the same time more flexible, and thus create the fundament for linking various production processes in an efficient way.

Influence of green supply chain risk management on performance of Chinese manufacturing enterprises

NASA Astrophysics Data System (ADS)

Zhang, Dongying; Yuting, Duan; Junyi, Shen

2017-12-01

This paper briefly introduces the background of the research on the impact of green supply chain risk management on corporate performance, reviews the relevant research literature at home and abroad, and uses the gray relational analysis to analyze the impact of the green supply chain risk management on enterprise performance based on 26 industry-related statistical data, from purchasing risk management performance,manufacturing risk management performance and marketing risk management performance.

Supply chain management of health commodities for reducing global disease burden.

PubMed

Chukwu, Otuto Amarauche; Ezeanochikwa, Valentine Nnaemeka; Eya, Benedict Ejikeme

Reducing global disease burden requires improving access to medicines, thus the need for efficient and effective supply chain management for medicines. The Nigerian government came up with new policies on Mega Drug Distribution Centres and National Drug Distribution Guidelines to improve access to quality medicines with pharmacists having a key role to play. However, pharmacists in Nigeria seem not to be aware and adequately equipped to handle the medicines supply chain. This article aimed at assessing the awareness and readiness of Nigerian pharmacists on supply chain management practices for improving access to medicines. Pharmacists in Nigeria's Capital were randomly sampled. Semi-structured questionnaires were administered. Descriptive statistics was used in data analysis. P values less than 0.05 were considered to be significant. 29.3%, 20.7% and 53.7% were not aware of supply chain management, National Drug Distribution Guidelines and Mega Drug Distribution Centres, respectively. 85.46% do not have a copy of the National Drug Distribution Guidelines. 78% were not aware that Mega Drug Distribution Centres are already operational. 35.4% have never been involved in any supply chain management practice. 69.5% often experience stock out of vital and essential medicines, of which 85.2% were in hospitals. 15.9% were successful in managing their facility's supply chains. 84.1% opined that pharmacists in Nigeria are not yet ready to handle the medicines supply chain. Findings showed limited awareness and readiness on supply chain management of medicines. This may be due to inadequate supply chain management skills and infrastructure, poor financing, lack of accountability and poor management. Tackling these as well as pharmacists showing more interest in the country's health policies and obtaining necessary postgraduate certifications will lead to improvements. This will improve access to quality medicines and thus help in the fight to reduce disease burden both locally and globally. Copyright © 2016 Elsevier Inc. All rights reserved.

Measuring the environmental sustainability performance of global supply chains: A multi-regional input-output analysis for carbon, sulphur oxide and water footprints.

PubMed

Acquaye, Adolf; Feng, Kuishuang; Oppon, Eunice; Salhi, Said; Ibn-Mohammed, Taofeeq; Genovese, Andrea; Hubacek, Klaus

2017-02-01

Measuring the performance of environmentally sustainable supply chains instead of chain constitute has become a challenge despite the convergence of the underlining principles of sustainable supply chain management. This challenge is exacerbated by the fact that supply chains are inherently dynamic and complex and also because multiple measures can be used to characterize performances. By identifying some of the critical issues in the literature regarding performance measurements, this paper contributes to the existing body of literature by adopting an environmental performance measurement approach for economic sectors. It uses economic sectors and evaluates them on a sectoral level in specific countries as well as part of the Global Value Chain based on the established multi-regional input-output (MRIO) modeling framework. The MRIO model has been used to calculate direct and indirect (that is supply chain or upstream) environmental effects such as CO 2 , SO 2 , biodiversity, water consumption and pollution to name just a few of the applications. In this paper we use MRIO analysis to calculate emissions and resource consumption intensities and footprints, direct and indirect impacts, and net emission flows between countries. These are exemplified by using carbon emissions, sulphur oxide emissions and water use in two highly polluting industries; Electricity production and Chemical industry in 33 countries, including the EU-27, Brazil, India and China, the USA, Canada and Japan from 1995 to 2009. Some of the highlights include: On average, direct carbon emissions in the electricity sector across all 27 member states of the EU was estimated to be 1368 million tons and indirect carbon emissions to be 470.7 million tons per year representing 25.6% of the EU-27 total carbon emissions related to this sector. It was also observed that from 2004, sulphur oxide emissions intensities in electricity production in India and China have remained relatively constant at about 62.8 gSO x /, respectively, $ and 84.4 gSO x /$ although being higher than in other countries. In terms of water use, the high water use intensity in China (1040.27 L/$) and India (961.63 L/$), which are among the highest in the sector in the electricity sector is exacerbated by both countries being ranked as High Water Stress Risk countries. The paper also highlights many advantages of the MRIO approach including: a 15-year time series study (which provides a measurement of environmental performance of key industries and an opportunity to assess technical and technological change during the investigated time period), a supply chain approach that provides a consistent methodological framework and accounts for all upstream supply chain environmental impacts throughout entire global supply chains. The paper also discusses the implications of the study to environmental sustainability performance measurement in terms of the level of analysis from a value chain hierarchy perspective, methodological issues, performance indicators, environmental exchanges and policy relevance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Critical Chain Exercises

ERIC Educational Resources Information Center

Doyle, John Kevin

2010-01-01

Critical Chains project management focuses on holding buffers at the project level vs. task level, and managing buffers as a project resource. A number of studies have shown that Critical Chain project management can significantly improve organizational schedule fidelity (i.e., improve the proportion of projects delivered on time) and reduce…

Supplier Development: A Long-Term Supportability Option For USAF Engines

DTIC Science & Technology

2012-02-01

Supply Chain Management Practices..................8 AF and DoD Regulations "Limitation or Hoax" Can USAF Develop Suppliers...integrated supply chain management (SCM) process providing engines and parts, aiding in the ability of the depots to meet the warfighter‟s needs. The... supply chain has struggled in the past to support the warfighter with enough engines to accomplish the mission. The engine supply chain management

Distribution and Supply Chain Management: Educating the Army Officer

DTIC Science & Technology

2005-05-26

knowledge a logistics officer must have to function effectively in a supply chain and distribution management environment. It analyzes how officers...Educational Objectives. It discusses how the Army/DoD currently teaches supply chain and distribution management concepts in various programs, such as the...its educational curriculum, and that logisticians continue to gain operational experience in distribution management operations. The paper recommends

What is the Right RFID for Your Process?

DTIC Science & Technology

2006-04-30

chain efficiency at the US Department of Defense (DoD) and at major retailers such as Wal-Mart, Tesco and others has prompted these organizations...areas of expertise include global operations, supply- chain management, sustainable technologies, product stewardship, reverse logistics and...time MBA programs. Areas of Apte’s research interests include managing service operations, supply- chain management, technology management, and

Selected Aspects Of The Risk In The Supply Chain In Context Of The Supplier Quality Management

NASA Astrophysics Data System (ADS)

Koblen, Ivan; Lestyánszka Škůrková, Katarína

2015-06-01

The introductory part of the paper underlines the importance of "Risk-based thinking" in the Quality Management System (QMS) and risk in the supply chain, as a principle part of the QMS. After introducing the key terms, the authors focused on the principle part of the article - explanation of the external and internal supply chain risks and the main factors concerning the supply risks, demand risks and environmental risks (as cardinal types of external supply chain risks) as well as the manufacturing and process risks, network/planning and control risks (as most important types of internal supply chain risks). The authors inform on the selected supply chain risk management tools, especially on those which are linked to the appropriate utilization of quality management tools.

A novel cryogenic magnetic refrigerant metal-organic framework based on 1D gadolinium(III) chain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Qun; Li, Peng-Fei; Zou, Zhi-Ming, E-mail: 2014005@glut.edu.cn

2017-02-15

A metal-organic framework (MOF) based on gadolinium ion (Gd{sup 3+}) and tricarboxylate ligand, [Gd(BTPCA)(H{sub 2}O)]·2DMF·3H{sub 2}O (Gd-BTPCA) (H{sub 3}BTPCA =1,1′,1′-(benzene-1,3,5-triyl)tripiperidine-4-carboxylic acid; DMF=dimethylformamide), was synthesized and structurally characterized. The adjacent Gd{sup 3+} ions are intraconnected by the carboxylate groups of the BTPCA{sup 3-} ligands to form a 1D Gd{sup 3+} ion chain. The 1D Gd{sup 3+} ion chains are interconnected by the BTPCA{sup 3-} ligands, giving rise to a 3D framework with 1D open channel. The magnetic studies indicate that Gd-BTPCA exhibits weak ferromagnetic interactions, and acts as a cryogenic magnetic refrigerant having the magnetic entropy change (−ΔS{sub m}) of 20.40more » J kg{sup −1} K{sup −1} for ΔH =7 T at 3 K. - Graphical abstract: A 1D gadolinium(III) chains-based metal-organic framework performed ferromagnetic coupling on the magnetic property. Magnetic investigation reveals that Gd-BTPCA exhibits the entropy change (−ΔS{sub m}) of 20.40 J kg{sup −1} K{sup −1} for ΔH =7 T at 3 K. - Highlights: • The MOF based on gadolinium ion and tricarboxylate ligand was synthesized. • This MOF is connected with 1D Gd{sup 3+} ions chain and the carboxylate groups of BTPCA{sup 3-} ligands. • The magnetic studies indicate that the MOF exhibits the weak ferromagnetic interactions. • Magnetic investigation reveals that the MOF exhibits the high entropy change.« less

Selectively catalytic activity of metal–organic frameworks depending on the N-position within the pyridine ring of their building blocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Haitao, E-mail: xuhaitao@ecust.edu.cn; Gou, Yongxia; Ye, Jing

2016-05-15

Iron metal–organic frameworks (MOFs) [Fe(L){sub 2}(SCN){sub 2}]{sub ∝} (L1: 4-bpdh=2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene for 1Fe; and L2: 3-bpdh=2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene for 2Fe) were assembled in a MeOH–H{sub 2}O solvent system. 1Fe exhibits a two-dimensional extended-grid network, whereas 2Fe exhibits a stair-like double-chain; the N-position within the pyridine ring of the complexes was observed to regulate the MOF structure as layers or chains. Furthermore, selectively catalytic activity was observed for the layered MOF but not the chain-structured MOF; micro/nanoparticles of the layered MOF were therefore investigated for new potential applications of micro/nano MOFs. - Graphical abstract: Iron metal–organic frameworks (MOFs) [Fe(L){sub 2}(SCN){sub 2}]{sub ∝} (L1: 4-bpdh=2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadienemore » for 1Fe; and L2: 3-bpdh=2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene for 2Fe) were assembled in a MeOH–H{sub 2}O solvent system. The N-position within the pyridine ring of the complexes was observed to regulate the MOF structure as layers or chains. Selectively catalytic activity was observed for the layered MOF but not the chain-structured MOF. - Highlights: • Synthesis and structure of metal–organic framework [Fe(L){sub 2}(SCN){sub 2}]{sub ∝}. • Selectively catalytic activity depending on the N-position within the pyridine ring. • The degradation and conversion of methyl orange.« less

Exploring future scenarios for the global supply chain of tuna

NASA Astrophysics Data System (ADS)

Mullon, C.; Guillotreau, P.; Galbraith, E. D.; Fortilus, J.; Chaboud, C.; Bopp, L.; Aumont, O.; Kaplan, D.

2017-06-01

The abundance of tuna, an important top predator that ranges throughout tropical and subtropical oceans, is now largely determined by fishing activity. Fishing activity, in turn, is determined by the interaction of fish availability, fishing capacity, fishing costs and global markets for tuna products. In the face of overfishing, the continued sustainable supply of tuna is likely to require improved global governance, that would benefit from modeling frameworks capable of integrating market forces with the availability of fish in order to consider alternative future projections. Here we describe such a modeling framework, in which we develop several simple, contrasting scenarios for the development of the tuna supply chain in order to illustrate the utility of the approach for global evaluation of management strategies for tuna and other complex, stock-structured fisheries. The model includes multiple national and multi-national fishing fleets, canneries and fresh/frozen markets, and connects these to global consumers using a network of flows. The model is calibrated using recent data on fish catch, cannery and fresh/frozen production, and consumption. Scenarios explore the control on future outcomes in the global tuna fishery by representing, in a simple way, the effects of (1) climate change, (2) changes in the global demand for tuna, and (3) changes in the access to fishing grounds (marine reserves). The results emphasize the potential importance of increasing demand in provoking a global collapse, and suggest that controlling tuna production by limiting technical efficiency is a potential countermeasure. Finally we discuss the outcomes in terms of potential extensions of the scenario approach allowed by this global network model of the tuna supply chain.

The role of architecture and ontology for interoperability.

PubMed

Blobel, Bernd; González, Carolina; Oemig, Frank; Lopéz, Diego; Nykänen, Pirkko; Ruotsalainen, Pekka

2010-01-01

Turning from organization-centric to process-controlled or even to personalized approaches, advanced healthcare settings have to meet special interoperability challenges. eHealth and pHealth solutions must assure interoperability between actors cooperating to achieve common business objectives. Hereby, the interoperability chain also includes individually tailored technical systems, but also sensors and actuators. For enabling corresponding pervasive computing and even autonomic computing, individualized systems have to be based on an architecture framework covering many domains, scientifically managed by specialized disciplines using their specific ontologies in a formalized way. Therefore, interoperability has to advance from a communication protocol to an architecture-centric approach mastering ontology coordination challenges.

Sustainable supply chain design: a configurational approach.

PubMed

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

PubMed Central

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

76 FR 34271 - Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,671] Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including Teleworkers Reporting to... Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston...

Challenges and opportunities of health care supply chain management in the United States.

PubMed

Elmuti, Dean; Khoury, Grace; Omran, Omar; Abou-Zaid, Ahmed S

2013-01-01

This article explores current supply chain management challenges and initiatives and identifies problems that affect supply chain management success in the U.S. health-care industry. In addition, it investigates the impact of health care supply chain management (SCM) initiatives on the overall organizational effectiveness. The attitudinal results, as well as the performance results presented in this study support the claim of health care proponents that the SCM allows organizations to reduce cost, improve quality, and reduce cycle time, and leads to high performance.

Environmental Management Competitive Pressure Effect on SME Environmental Innovation Activities: A Green Supply Chain Perspective

NASA Astrophysics Data System (ADS)

Rashid, A. A.; Sidek, A. A.; Suffian, S. A.; Daud, M. R. C.

2018-01-01

The idea of assimilating green supply chain is to integrate and establish environmental management into the supply chain practices. The study aims to explore how environmental management competitive pressure influences a SME company in Malaysia to incorporate green supply chain integration, which is an efficient platform to develop environmental innovation. This study further advances green supply chain management research in Malaysia by using the method of quantitative analysis to analyze the model developed which data will be collected based on a sample of SMEs in Malaysia in manufacturing sector. The model developed in this study illustrates how environmental management competitive pressure from main competitors affects three fundamental dimensions of green supply chain integration. The research findings suggest that environmental management competitive pressure is a vital driving force for a SME company to incorporate internal and external collaboration in developing green product innovation. From the analysis conducted, the study strongly demonstrated that the best way for a company to counteract competitor’s environmental management success is to first implement strong internal green product development process then move to incorporate external environmental management innovation between their suppliers and customers. The findings also show that internal integration of green product innovation fully mediates the relationship of environmental management competitive pressure and the external integration of green product innovation.

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

NASA Astrophysics Data System (ADS)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

PubMed

Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

2010-02-01

Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

Foreign Military Sales: A Historical Review of Argentina’s Purchases

DTIC Science & Technology

2013-03-01

Management Science, 2009. 3. Douglas M Lambert, “ Supply Chain Management Processes, Partnership, Performance”, Third Edition, 2008. 4. Sunil Chopra...Science in Logistics and Supply Chain Management Juan E. Perot, MBA LtCol, AAF March 2013 APPROVED FOR PUBLIC RELEASE; DISTRIBUTION...ago, and they manage various purchasing activities in each year for several systems. Therefore a particular and specific Supply Chain

Illustrating the Interaction of Nature and People in Ecosystem Services: The Case of Terroir in Wine

NASA Astrophysics Data System (ADS)

Nicholas, K. A.

2014-12-01

The ecosystem services (ES) approach is increasingly used in research and policy, with the Common International Framework on Ecosystem Services (CICES) "cascade" gaining traction as a framework for conceptualizing the production of ecosystem services by the natural environment, and then people consuming these services and obtaining benefits depending on their values. However, uptake of the ES concept on the ground by ecosystem managers, and understanding by everyday citizens, is still limited. One barrier is the challenge of providing tangible, examples of everyday benefits and values that people can readily connect with the biophysical structures and functions that underlie their provision. Winegrowing offers one promising case to illustrate the linkages all along the chain of production and consumption of ecosystem services. The sensitive winegrape has long been known for its properties of terroir, where the taste of wine reflects the environmental conditions of the place where it is grown, a feature valued by consumers. Here the CICES framework is illustrated with the case of winegrowing, demonstrating that the current linear model of natural production and human consumption of ES needs to be modified for this case because people influence each of the five stages by shaping and responding to their environment, producing a two-way interaction between people and the environment throughout. For example, while natural drivers such as climate and soils are key to the provision of the service of winegrape yields, landowners modify the biophysical environment through site selection and growers modify plant ecophysiological function through farming practices such as pruning and irrigation in order to influence the final service. Similarly, winemakers' expertise is needed to transform the service of winegrape yields into the product of wine that can be enjoyed and valued by consumers, whose preferences shape wine styles as well. This case illustrates how incorporating both natural and human factors all along the chain of production and consumption of ecosystem services can better represent the potential services provided, and highlights the need to identify relevant decisionmakers at each stage to better understand and manage ecosystem services under environmental change.

Sustainability of cement kiln co-processing of wastes in India: a pilot study.

PubMed

Baidya, Rahul; Ghosh, Sadhan Kumar; Parlikar, Ulhas V

2017-07-01

Co-processing in cement kiln achieves effective utilization of the material and energy value present in the wastes, thereby conserving the natural resources by reducing the use of virgin material. In India, a number of multifolded initiatives have been taken that take into account the potential and volume of waste generation. This paper studies the factors which might influence the sustainability of co-processing of waste in cement kilns as a business model, considering the issues and challenges in the supply chain framework in India in view of the four canonical pillars of sustainability. A pilot study on co-processing was carried out in one of the cement plant in India to evaluate the environmental performance, economical performance, operational performance and social performance. The findings will help India and other developing countries to introduce effective supply chain management for co-processing while addressing the issues and challenges during co-processing of different waste streams in the cement kilns.

How to map your industry's profit pool.

PubMed

Gadiesh, O; Gilbert, J L

1998-01-01

Many managers chart strategy without a full understanding of the sources and distribution of profits in their industry. Sometimes they focus their sights on revenues instead of profits, mistakenly assuming that revenue growth will eventually translate into profit growth. In other cases, they simply lack the data or the analytical tools required to isolate and measure variations in profitability. In this Manager's Tool Kit, the authors present a way to think clearly about where the money's being made in any industry. They describe a framework for analyzing how profits are distributed among the activities that form an industry's value chain. Such an analysis can provide a company's managers with a rich understanding of their industry's profit structure--what the authors call its profit pool--enabling them to identify which activities are generating disproportionately large or small shares of profits. Even more important, a profit-pool map opens a window onto the underlying structure of the industry, helping managers see the various forces that are determining the distribution of profits. As such, a profit-pool map provides a solid basis for strategic thinking. Mapping a profit pool involves four steps: defining the boundaries of the pool, estimating the pool's overall size, estimating the size of each value-chain activity in the pool, and checking and reconciling the calculations. The authors briefly describe each step and then apply the process by providing a detailed example of a hypothetical retail bank. They conclude by looking at ways of organizing the data in chart form as a first step toward plotting a profit-pool strategy.

Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

NASA Astrophysics Data System (ADS)

Kongar, N. Elif

2004-12-01

Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

An Exploration of Supply Chain Management Practices in the Central District Municipality

ERIC Educational Resources Information Center

Ambe, I. M.

2009-01-01

The main objective of the paper is to explore supply chain management practices in the Central District Municipality, North West province of South Africa, using the grounded theory methodology. Supply chain management was introduced in the South African public sector to alleviate deficiencies related to governance, interpretation and…

Leveraging Human Resource Development Expertise to Improve Supply Chain Managers' Skills and Competencies

ERIC Educational Resources Information Center

Ellinger, Alexander E.; Ellinger, Andrea D.

2014-01-01

Purpose: There is an ongoing shortage of talented supply chain managers with the necessary skills and business-related competencies to manage increasingly complex and strategically important supply chain processes. The purpose of this paper is to propose that organizations can create and maintain competitive advantage by leveraging the expertise…

Sustainable Supply Chain Management Programs in the 21st Century

ERIC Educational Resources Information Center

Neureuther, Brian D.; O'Neill, Kevin

2011-01-01

One of the most difficult challenges for an undergraduate supply chain management program at smaller universities is to create an environment of sustainability. Supply chain management is not at the tip of tongue for many graduating high school students and few undergraduate curriculums require a course in the content area. This research addresses…

Data management in an object-oriented distributed aircraft conceptual design environment

NASA Astrophysics Data System (ADS)

Lu, Zhijie

In the competitive global market place, aerospace companies are forced to deliver the right products to the right market, with the right cost, and at the right time. However, the rapid development of technologies and new business opportunities, such as mergers, acquisitions, supply chain management, etc., have dramatically increased the complexity of designing an aircraft. Therefore, the pressure to reduce design cycle time and cost is enormous. One way to solve such a dilemma is to develop and apply advanced engineering environments (AEEs), which are distributed collaborative virtual design environments linking researchers, technologists, designers, etc., together by incorporating application tools and advanced computational, communications, and networking facilities. Aircraft conceptual design, as the first design stage, provides major opportunity to compress design cycle time and is the cheapest place for making design changes. However, traditional aircraft conceptual design programs, which are monolithic programs, cannot provide satisfactory functionality to meet new design requirements due to the lack of domain flexibility and analysis scalability. Therefore, we are in need of the next generation aircraft conceptual design environment (NextADE). To build the NextADE, the framework and the data management problem are two major problems that need to be addressed at the forefront. Solving these two problems, particularly the data management problem, is the focus of this research. In this dissertation, in light of AEEs, a distributed object-oriented framework is firstly formulated and tested for the NextADE. In order to improve interoperability and simplify the integration of heterogeneous application tools, data management is one of the major problems that need to be tackled. To solve this problem, taking into account the characteristics of aircraft conceptual design data, a robust, extensible object-oriented data model is then proposed according to the distributed object-oriented framework. By overcoming the shortcomings of the traditional approach of modeling aircraft conceptual design data, this data model makes it possible to capture specific detailed information of aircraft conceptual design without sacrificing generality, which is one of the most desired features of a data model for aircraft conceptual design. Based upon this data model, a prototype of the data management system, which is one of the fundamental building blocks of the NextADE, is implemented utilizing the state of the art information technologies. Using a general-purpose integration software package to demonstrate the efficacy of the proposed framework and the data management system, the NextADE is initially implemented by integrating the prototype of the data management system with other building blocks of the design environment, such as disciplinary analyses programs and mission analyses programs. As experiments, two case studies are conducted in the integrated design environments. One is based upon a simplified conceptual design of a notional conventional aircraft; the other is a simplified conceptual design of an unconventional aircraft. As a result of the experiments, the proposed framework and the data management approach are shown to be feasible solutions to the research problems.

Optimal vaccine stockpile design for an eradicated disease: application to polio.

PubMed

Tebbens, Radboud J Duintjer; Pallansch, Mark A; Alexander, James P; Thompson, Kimberly M

2010-06-11

Eradication of a disease promises significant health and financial benefits. Preserving those benefits, hopefully in perpetuity, requires preparing for the possibility that the causal agent could re-emerge (unintentionally or intentionally). In the case of a vaccine-preventable disease, creation and planning for the use of a vaccine stockpile becomes a primary concern. Doing so requires consideration of the dynamics at different levels, including the stockpile supply chain and transmission of the causal agent. This paper develops a mathematical framework for determining the optimal management of a vaccine stockpile over time. We apply the framework to the polio vaccine stockpile for the post-eradication era and present examples of solutions to one possible framing of the optimization problem. We use the framework to discuss issues relevant to the development and use of the polio vaccine stockpile, including capacity constraints, production and filling delays, risks associated with the stockpile, dynamics and uncertainty of vaccine needs, issues of funding, location, and serotype dependent behavior, and the implications of likely changes over time that might occur. This framework serves as a helpful context for discussions and analyses related to the process of designing and maintaining a stockpile for an eradicated disease. (c) 2010 Elsevier Ltd. All rights reserved.

The role and functionality of Veterinary Services in food safety throughout the food chain.

PubMed

McKenzie, A I; Hathaway, S C

2006-08-01

Both national Veterinary Services and international standard-setting organisations have now embraced risk assessment as an essential tool for achieving their goals. Veterinarians have key roles in all aspects of the control of food-borne hazards of animal origin, but additional specialist skills are necessary for assessing, managing and communicating risk. Further, the deployment of Veterinary Services must reflect the multi-functional aspects of public and animal health activities. A generic risk management framework provides a systematic process whereby food safety standards and other measures are chosen and implemented on the basis of knowledge of risk and evaluation of other factors relevant to protecting human health and promoting non-discriminatory trade practices. In this context, a number of countries are exploring new administrative and structural arrangements for competent authorities. The traditional focus of veterinary involvement in food safety has been in meat hygiene at the level of the slaughterhouse. While this role continues, the emerging 'risk-based' approach to food control requires increased involvement in other segments of the meat food chain, as well as other areas such as production of milk and fish. This more extensive role requires a wider skill base and establishment of effective networks with a different range of stakeholders.

An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices

NASA Astrophysics Data System (ADS)

Shahlan, M. Z.; Sidek, A. A.; Suffian, S. A.; Hazza, M. H. F. A.; Daud, M. R. C.

2018-01-01

In this paper, climate change and global warming are the biggest current issues in the industrial sectors. The green supply chain managements (GSCM) is one of the crucial input to these issues. Effective GSCM can potentially secure the organization’s competitive advantage and improve the environmental performance of the network activities. In this study, the aim is to investigate and examine how a small and medium enterprises (SMEs) stakeholder pressure and top management influence green supply chain management practices. The study is further advance green supply chain management research in Malaysia focusing on SMEs manufacturing sector using structural equation modelling. Structural equation modelling is a multivariate statistical analysis technique used to examine structural relationship. It is the combination of factor analysis and multi regression analysis and used to analyse structural relationship between measure variable and latent factor. This research found that top management support and stakeholder pressure is the major influence for SMEs to adopt green supply chain management. The research also found that top management is fully mediate with the relationship between stakeholder pressure and monitoring supplier environmental performance.

Teaching an Old Log New Tricks with Machine Learning.

PubMed

Schnell, Krista; Puri, Colin; Mahler, Paul; Dukatz, Carl

2014-03-01

To most people, the log file would not be considered an exciting area in technology today. However, these relatively benign, slowly growing data sources can drive large business transformations when combined with modern-day analytics. Accenture Technology Labs has built a new framework that helps to expand existing vendor solutions to create new methods of gaining insights from these benevolent information springs. This framework provides a systematic and effective machine-learning mechanism to understand, analyze, and visualize heterogeneous log files. These techniques enable an automated approach to analyzing log content in real time, learning relevant behaviors, and creating actionable insights applicable in traditionally reactive situations. Using this approach, companies can now tap into a wealth of knowledge residing in log file data that is currently being collected but underutilized because of its overwhelming variety and volume. By using log files as an important data input into the larger enterprise data supply chain, businesses have the opportunity to enhance their current operational log management solution and generate entirely new business insights-no longer limited to the realm of reactive IT management, but extending from proactive product improvement to defense from attacks. As we will discuss, this solution has immediate relevance in the telecommunications and security industries. However, the most forward-looking companies can take it even further. How? By thinking beyond the log file and applying the same machine-learning framework to other log file use cases (including logistics, social media, and consumer behavior) and any other transactional data source.

National Laboratory Planning: Developing Sustainable Biocontainment Laboratories in Limited Resource Areas.

PubMed

Yeh, Kenneth B; Adams, Martin; Stamper, Paul D; Dasgupta, Debanjana; Hewson, Roger; Buck, Charles D; Richards, Allen L; Hay, John

2016-01-01

Strategic laboratory planning in limited resource areas is essential for addressing global health security issues. Establishing a national reference laboratory, especially one with BSL-3 or -4 biocontainment facilities, requires a heavy investment of resources, a multisectoral approach, and commitments from multiple stakeholders. We make the case for donor organizations and recipient partners to develop a comprehensive laboratory operations roadmap that addresses factors such as mission and roles, engaging national and political support, securing financial support, defining stakeholder involvement, fostering partnerships, and building trust. Successful development occurred with projects in African countries and in Azerbaijan, where strong leadership and a clear management framework have been key to success. A clearly identified and agreed management framework facilitate identifying the responsibility for developing laboratory capabilities and support services, including biosafety and biosecurity, quality assurance, equipment maintenance, supply chain establishment, staff certification and training, retention of human resources, and sustainable operating revenue. These capabilities and support services pose rate-limiting yet necessary challenges. Laboratory capabilities depend on mission and role, as determined by all stakeholders, and demonstrate the need for relevant metrics to monitor the success of the laboratory, including support for internal and external audits. Our analysis concludes that alternative frameworks for success exist for developing and implementing capabilities at regional and national levels in limited resource areas. Thus, achieving a balance for standardizing practices between local procedures and accepted international standards is a prerequisite for integrating new facilities into a country's existing public health infrastructure and into the overall international scientific community.

Developing and implementing a service charter for an integrated regional stroke service: an exploratory case study

PubMed Central

2014-01-01

Background Based on practices in commercial organizations and public services, healthcare organizations are using service charters to inform patients about the quality of service they can expect and to increase patient-centeredness. In the Netherlands, an integrated regional stroke service involving five organizations has developed and implemented a single service charter. The purpose of this study is to determine the organizational enablers for the effective development and implementation of this service charter. Methods We have conducted an exploratory qualitative study using Grounded Theory to determine the organizational enablers of charter development and implementation. Individual semi-structured interviews were held with all members of the steering committee and the taskforce responsible for the service charter. In these twelve interviews, participants were retrospectively asked for their opinions of the enablers. Interview transcripts have been analysed using Glaser’s approach of substantive coding consisting of open and selective coding in order to develop a framework of these enablers. A tabula rasa approach was used without any preconceived frameworks used in the coding process. Results We have determined seven categories of enablers formed of a total of 27 properties. The categories address a broad spectrum of enablers dealing with the basic foundations for cooperation, the way to manage the project’s organization and the way to implement the service charter. In addition to the enablers within each individual organization, enablers that reflect the whole chain seem to be important for the effective development and implementation of this service charter. Strategic alignment of goals within the chain, trust between organizations, willingness to cooperate and the extent of process integration are all important properties. Conclusions This first exploratory study into the enablers of the effective development and implementation was based on a single case study in the Netherlands. This is the only integrated care chain using a single service charter that we could find. Nevertheless, the results of our explorative study provide an initial framework for the development and implementation of service charters in integrated care settings. This research contributes to the literature on service charters, on patient-centeredness in integrated care and on the implementation of innovations. PMID:24678839

Pursuing High-Mobility n-Type Organic Semiconductors by Combination of "Molecule-Framework" and "Side-Chain" Engineering.

PubMed

Zhang, Cheng; Zang, Yaping; Zhang, Fengjiao; Diao, Ying; McNeill, Christopher R; Di, Chong-An; Zhu, Xiaozhang; Zhu, Daoben

2016-10-01

"Molecule-framework" and "side-chain" engineering is powerful for the design of high-performance organic semiconductors. Based on 2DQTTs, the relationship between molecular structure, film microstructure, and charge-transport property in organic thin-film transistors (OTFTs) is studied. 2DQTT-o-B exhibits outstanding electron mobilities of 5.2 cm 2 V -1 s -1 , which is a record for air-stable solution-processable n-channel small-molecule OTFTs to date. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

What is Climate Leadership: Examples and Lessons Learned in Supply Chain Management Webinar

EPA Pesticide Factsheets

Organizations that have developed comprehensive greenhouse gas inventories and aggressive emissions reduction goals discuss their strategies for managing greenhouse gases in their organizational supply chains and use of EPA Supply Chain resources.

A Unified Framework for Complex Networks with Degree Trichotomy Based on Markov Chains.

PubMed

Hui, David Shui Wing; Chen, Yi-Chao; Zhang, Gong; Wu, Weijie; Chen, Guanrong; Lui, John C S; Li, Yingtao

2017-06-16

This paper establishes a Markov chain model as a unified framework for describing the evolution processes in complex networks. The unique feature of the proposed model is its capability in addressing the formation mechanism that can reflect the "trichotomy" observed in degree distributions, based on which closed-form solutions can be derived. Important special cases of the proposed unified framework are those classical models, including Poisson, Exponential, Power-law distributed networks. Both simulation and experimental results demonstrate a good match of the proposed model with real datasets, showing its superiority over the classical models. Implications of the model to various applications including citation analysis, online social networks, and vehicular networks design, are also discussed in the paper.

Do chain pharmacies perform better than independent pharmacies? Evidence from a standardised patient study of the management of childhood diarrhoea and suspected tuberculosis in urban India.

PubMed

Miller, Rosalind; Goodman, Catherine

2017-01-01

Pharmacies and drug stores are frequently patients' first point of care in many low-income and middle-income countries, but their practice is often poor. Pharmacy retailing in India has traditionally been dominated by local, individually owned shops, but recent years have seen the growth of pharmacy chains. In theory, lower-powered profit incentives and self-regulation to preserve brand identity may lead to higher quality in chain stores. In practice, this has been little studied. We randomly selected a stratified sample of chain and independent pharmacies in urban Bengaluru. Standardised patients (SPs) visited pharmacies and presented a scripted case of diarrhoea for a child and suspected tuberculosis (TB). SPs were debriefed immediately after the visit using a structured questionnaire. We measured the quality of history taking, therapeutic management and advice giving against national (Government of India) and international (WHO) guidelines. We used Pearson's χ 2 tests to examine associations between pharmacy type and case management. Management of childhood diarrhoea and suspected TB was woefully substandard. History taking of the SP was limited; unnecessary and harmful medicines, including antibiotics, were commonly sold; and advice giving was near non-existent. The performance of chains and independent shops was strikingly similar for most areas of assessment. We observed no significant differences between the management of suspected TB in chains and independents. 43% of chains and 45% of independents managed the TB case correctly; 17% and 16% of chains and independents, respectively, sold antibiotics. We found that chains sold significantly fewer harmful antibiotics and antidiarrhoeals (35% vs 48%, p=0.029) and prescription-only medicines (37% vs 49%, p=0.048) for the patient with diarrhoea compared with independent shops. Not a single shop managed the patient with diarrhoea correctly according to guidelines. Our results from Bengaluru suggest that it is unlikely that chains alone can solve persisting quality challenges. However, they may offer a potential vehicle through which to deliver interventions. Future intervention research should consider recruiting chains to see whether effectiveness of interventions differ among chains compared with independents.

Do chain pharmacies perform better than independent pharmacies? Evidence from a standardised patient study of the management of childhood diarrhoea and suspected tuberculosis in urban India

PubMed Central

Miller, Rosalind; Goodman, Catherine

2017-01-01

Introduction Pharmacies and drug stores are frequently patients’ first point of care in many low-income and middle-income countries, but their practice is often poor. Pharmacy retailing in India has traditionally been dominated by local, individually owned shops, but recent years have seen the growth of pharmacy chains. In theory, lower-powered profit incentives and self-regulation to preserve brand identity may lead to higher quality in chain stores. In practice, this has been little studied. Methods We randomly selected a stratified sample of chain and independent pharmacies in urban Bengaluru. Standardised patients (SPs) visited pharmacies and presented a scripted case of diarrhoea for a child and suspected tuberculosis (TB). SPs were debriefed immediately after the visit using a structured questionnaire. We measured the quality of history taking, therapeutic management and advice giving against national (Government of India) and international (WHO) guidelines. We used Pearson’s χ2 tests to examine associations between pharmacy type and case management. Findings Management of childhood diarrhoea and suspected TB was woefully substandard. History taking of the SP was limited; unnecessary and harmful medicines, including antibiotics, were commonly sold; and advice giving was near non-existent. The performance of chains and independent shops was strikingly similar for most areas of assessment. We observed no significant differences between the management of suspected TB in chains and independents. 43% of chains and 45% of independents managed the TB case correctly; 17% and 16% of chains and independents, respectively, sold antibiotics. We found that chains sold significantly fewer harmful antibiotics and antidiarrhoeals (35% vs 48%, p=0.029) and prescription-only medicines (37% vs 49%, p=0.048) for the patient with diarrhoea compared with independent shops. Not a single shop managed the patient with diarrhoea correctly according to guidelines. Conclusion Our results from Bengaluru suggest that it is unlikely that chains alone can solve persisting quality challenges. However, they may offer a potential vehicle through which to deliver interventions. Future intervention research should consider recruiting chains to see whether effectiveness of interventions differ among chains compared with independents. PMID:29018588

Applying the Heuristic to the Risk Assessment within the Automotive Industry Supply Chain

NASA Astrophysics Data System (ADS)

Marasova, Daniela; Andrejiova, Miriam; Grincova, Anna

2017-03-01

Risk management facilitates risk identification, evaluation, control, and by means of appropriate set of measures, risk reduction or complete elimination. Therefore, the risk management becomes a strategic factor for a company's success. Properly implemented risk management system does not represent a tool to avoid the risk; it is used to understand the risk and provide the bases for strategic decision-making. Risk management represents a key factor for the supply chain operations. Managing the risks is crucial for achieving the customer satisfaction and thus also a company's success. The subject-matter of the article is the assessment of the supply chain in the automobile industry, in terms of risks. The topicality of this problem is even higher, as after the economic crisis it is necessary to revaluate the readiness of the supply chain for prospective risk conditions. One advantage of this article is the use of the Saaty method as a tool for the risk management within the supply chain.

Learning In networks

NASA Technical Reports Server (NTRS)

Buntine, Wray L.

1995-01-01

Intelligent systems require software incorporating probabilistic reasoning, and often times learning. Networks provide a framework and methodology for creating this kind of software. This paper introduces network models based on chain graphs with deterministic nodes. Chain graphs are defined as a hierarchical combination of Bayesian and Markov networks. To model learning, plates on chain graphs are introduced to model independent samples. The paper concludes by discussing various operations that can be performed on chain graphs with plates as a simplification process or to generate learning algorithms.

Detecting Service Chains and Feature Interactions in Sensor-Driven Home Network Services

PubMed Central

Inada, Takuya; Igaki, Hiroshi; Ikegami, Kosuke; Matsumoto, Shinsuke; Nakamura, Masahide; Kusumoto, Shinji

2012-01-01

Sensor-driven services often cause chain reactions, since one service may generate an environmental impact that automatically triggers another service. We first propose a framework that can formalize and detect such service chains based on ECA (event, condition, action) rules. Although the service chain can be a major source of feature interactions, not all service chains lead to harmful interactions. Therefore, we then propose a method that identifies feature interactions within the service chains. Specifically, we characterize the degree of deviation of every service chain by evaluating the gap between expected and actual service states. An experimental evaluation demonstrates that the proposed method successfully detects 11 service chains and 6 feature interactions within 7 practical sensor-driven services. PMID:23012499

A Framework for Evaluating R&D Impacts and Supply Chain Dynamics Early in a Product Life Cycle. Looking inside the black box of innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jordan, Gretchen; Mote, Jonathan; Ruegg, Rosalie

This report provides a framework for evaluation of R&D investments aimed at speeding up the pace of innovation and strengthening domestic manufacturing and supply chains, which make up a portion of the investments of the U.S. Department of Energy's (DOEs) Office of Energy Efficiency and Renewable Energy (EERE). These investments focus on early phases of the product life cycle, characterized as extending from pre-product, late stage R&D, to initial product introduction and through to early market growth. The investments aim to provide support for additional technology, supply-chain, manufacturing, and early market development to enhance or create markets for clean energymore » technologies and strengthen the U.S. industry base.« less

Effective Hamiltonian for travelling discrete breathers

NASA Astrophysics Data System (ADS)

MacKay, Robert S.; Sepulchre, Jacques-Alexandre

2002-05-01

Hamiltonian chains of oscillators in general probably do not sustain exact travelling discrete breathers. However solutions which look like moving discrete breathers for some time are not difficult to observe in numerics. In this paper we propose an abstract framework for the description of approximate travelling discrete breathers in Hamiltonian chains of oscillators. The method is based on the construction of an effective Hamiltonian enabling one to describe the dynamics of the translation degree of freedom of moving breathers. Error estimate on the approximate dynamics is also studied. The concept of the Peierls-Nabarro barrier can be made clear in this framework. We illustrate the method with two simple examples, namely the Salerno model which interpolates between the Ablowitz-Ladik lattice and the discrete nonlinear Schrödinger system, and the Fermi-Pasta-Ulam chain.

Discussion of "Carbon benefits of wolfberry plantation on secondary saline land in Jingtai oasis, Gansu - A case study on application of the CBP model" by Yaolin Wang, Chuanyan Zhao, Quanlin Ma, Yingke Li, Hujia Jing, Tao Sun, Eleanor Milne, Mark Easter, Keith Paustian, Hoi Wen Au Yong, John McDonagh (2015) [Journal of Environmental Management 157, 303-310].

PubMed

Azarnivand, Ali

2015-12-01

Wang et al. (2015) employed driving force-pressure-state-impact-response (DPSIR) framework to provide a robust decision-making structure for carbon emission reduction by use of wolfberry plantation in the Jingtai oasis, China. DPSIR appropriately identified the causes of problem along with adopting the responses to the barriers associated with wolfberry plantation. However, the discusser argues that, the paper could have prepared more viable outcomes, if the authors had used causal network rather than causal chains through the DPSIR framework. Furthermore, they could have quantified the mutual relationship among the relevant factors to provide a detailed economic assessment. With this knowledge in hand, the current discussion letter suggests eDPSIR and meDPSIR to address drawbacks regarding conventional DPSIR framework. Due to proper performance of eDPSIR and meDPSIR, they are recommended as practical tools in the future environmental studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of stigma reduction intervention strategies on HIV test uptake in low- and middle-income countries: a realist review protocol.

PubMed

Thapa, Subash; Hannes, Karin; Cargo, Margaret; Buve, Anne; Mathei, Catharina

2015-11-02

Several stigma reduction intervention strategies have been developed and tested for effectiveness in terms of increasing human immunodeficiency virus (HIV) test uptake. These strategies have been more effective in some contexts and less effective in others. Individual factors, such as lack of knowledge and fear of disclosure, and social-contextual factors, such as poverty and illiteracy, might influence the effect of stigma reduction intervention strategies on HIV test uptake in low- and middle-income countries. So far, it is not clearly known how the stigma reduction intervention strategies interact with these contextual factors to increase HIV test uptake. Therefore, we will conduct a review that will synthesize existing studies on stigma reduction intervention strategies to increase HIV test uptake to better understand the mechanisms underlying this process in low- and middle-income countries. A realist review will be conducted to unpack context-mechanism-outcome configurations of the effect of stigma reduction intervention strategies on HIV test uptake. Based on a scoping review, we developed a preliminary theoretical framework outlining a potential mechanism of how the intervention strategies influence HIV test uptake. Our realist synthesis will be used to refine the preliminary theoretical framework to better reflect mechanisms that are supported by existing evidence. Journal articles and grey literature will be searched following a purposeful sampling strategy. Data will be extracted and tested against the preliminary theoretical framework. Data synthesis and analysis will be performed in five steps: organizing extracted data into evidence tables, theming, formulating chains of inference from the identified themes, linking the chains of inference and developing generative mechanisms, and refining the framework. This will be the first realist review that offers both a quantitative and a qualitative exploration of the available evidence to develop and propose a theoretical framework that explains why and how HIV stigma reduction intervention strategies influence HIV test uptake in low- and middle-income countries. Our theoretical framework is meant to provide guidance to program managers on identifying the most effective stigma reduction intervention strategies to increase HIV test uptake. We also include advice on how to effectively implement these strategies to reduce the rate of HIV transmission. PROSPERO CRD42015023687.

Alignment of Information Systems with Supply Chains: Impacts on Supply Chain Performance and Organizational Performance

ERIC Educational Resources Information Center

Qrunfleh, Sufian M.

2010-01-01

Over the past decade, an important focus of researchers has been on supply chain management (SCM), as many organizations believe that effective SCM is the key to building and sustaining competitive advantage for their products/services. To manage the supply chain, companies need to adopt an SCM strategy (SCMS) and implement appropriate SCM…

Intelligence Support to Supply Chain Risk Management

DTIC Science & Technology

2012-06-01

of Master of Science in Operations Analysis Charles L. Carter, MA Major, USAF June 2012 DISTRIBUTION STATEMENT A. APPROVED FOR...literature regarding supply chain risk management and intelligence doctrine. This review established the importance of supply chain risk analysis to...risk analysis . This research culminated in the development of a methodology for intelligence professionals to use to support supply chain risk

ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, Klaas Jan; Homan, Greg; Brown, Rich

2009-04-15

The term ?household carbon footprint? refers to the total annual carbon emissions associated with household consumption of energy, goods, and services. In this project, Lawrence Berkeley National Laboratory developed a carbon footprint modeling framework that characterizes the key underlying technologies and processes that contribute to household carbon footprints in California and the United States. The approach breaks down the carbon footprint by 35 different household fuel end uses and 32 different supply chain fuel end uses. This level of end use detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the carbon footprintmore » of California households. The modeling framework was applied to estimate the annual home energy and supply chain carbon footprints of a prototypical California household. A preliminary assessment of parameter uncertainty associated with key model input data was also conducted. To illustrate the policy-relevance of this modeling framework, a case study was conducted that analyzed the achievable carbon footprint reductions associated with the adoption of energy efficient household and supply chain technologies.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malikopoulos, Andreas; Djouadi, Seddik M; Kuruganti, Teja

We consider the optimal stochastic control problem for home energy systems with solar and energy storage devices when the demand is realized from the grid. The demand is subject to Brownian motions with both drift and variance parameters modulated by a continuous-time Markov chain that represents the regime of electricity price. We model the systems as pure stochastic differential equation models, and then we follow the completing square technique to solve the stochastic home energy management problem. The effectiveness of the efficiency of the proposed approach is validated through a simulation example. For practical situations with constraints consistent to thosemore » studied here, our results imply the proposed framework could reduce the electricity cost from short-term purchase in peak hour market.« less

Integration of human factors principles in LARG organizations--a conceptual model.

PubMed

Figueira, Sara; Machado, V Cruz; Nunes, Isabel L

2012-01-01

Nowadays many companies are undergoing organizational transformations in order to meet the changing market demands. Thus, in order to become more competitive, supply chains (SC) are adopting new management paradigms to improve SC performance: lean, agile, resilient and green (LARG paradigms). The implementation of new production paradigms demands particular care with the issues related with Human Factors to avoid health and safety problems to workers and losses to companies. Thus, the successful introduction of these new production paradigms depends among others on a Human Factors oriented approach. This work presents a conceptual framework that allows integrating ergonomic and safety design principles during the different implementation phases of lean, agile, resilient and green practices.

Knowledge management system for risk mitigation in supply chain uncertainty: case from automotive battery supply chain

NASA Astrophysics Data System (ADS)

Marie, I. A.; Sugiarto, D.; Surjasa, D.; Witonohadi, A.

2018-01-01

Automotive battery supply chain include battery manufacturer, sulphuric acid suppliers, polypropylene suppliers, lead suppliers, transportation service providers, warehouses, retailers and even customers. Due to the increasingly dynamic condition of the environment, supply chain actors were required to improve their ability to overcome various uncertainty issues in the environment. This paper aims to describe the process of designing a knowledge management system for risk mitigation in supply chain uncertainty. The design methodology began with the identification of the knowledge needed to solve the problems associated with uncertainty and analysis of system requirements. The design of the knowledge management system was described in the form of a data flow diagram. The results of the study indicated that key knowledge area that needs to be managed were the knowledge to maintain the stability of process in sulphuric acid process and knowledge to overcome the wastes in battery manufacturing process. The system was expected to be a media acquisition, dissemination and storage of knowledge associated with the uncertainty in the battery supply chain and increase the supply chain performance.

Supply chain dynamics in healthcare services.

PubMed

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

The Multidisciplinary Nature of Supply Chain Management: Where Does It Fit in Business Education?

ERIC Educational Resources Information Center

Jones, Michael A.; Cope, Robert; Budden, Michael C.

2009-01-01

Supply chain management is an area of growing interest in both industry and academics. A number of new text books are available for courses in the area, and a number of Colleges of Business are adding relevant curriculum. However, questions arise as to what Supply Chain Management comprises, as to needed courses in the area, and an appropriate…

DIRAC File Replica and Metadata Catalog

NASA Astrophysics Data System (ADS)

Tsaregorodtsev, A.; Poss, S.

2012-12-01

File replica and metadata catalogs are essential parts of any distributed data management system, which are largely determining its functionality and performance. A new File Catalog (DFC) was developed in the framework of the DIRAC Project that combines both replica and metadata catalog functionality. The DFC design is based on the practical experience with the data management system of the LHCb Collaboration. It is optimized for the most common patterns of the catalog usage in order to achieve maximum performance from the user perspective. The DFC supports bulk operations for replica queries and allows quick analysis of the storage usage globally and for each Storage Element separately. It supports flexible ACL rules with plug-ins for various policies that can be adopted by a particular community. The DFC catalog allows to store various types of metadata associated with files and directories and to perform efficient queries for the data based on complex metadata combinations. Definition of file ancestor-descendent relation chains is also possible. The DFC catalog is implemented in the general DIRAC distributed computing framework following the standard grid security architecture. In this paper we describe the design of the DFC and its implementation details. The performance measurements are compared with other grid file catalog implementations. The experience of the DFC Catalog usage in the CLIC detector project are discussed.

[Application of supply chain integration management of medical consumables].

PubMed

Zhang, Jian

2013-07-01

This paper introduces the background, the content, the information management system of material supply chain integration management and the consumables management process. The system helps to expand the selection of hospital supplies varieties, to reduce consumables management costs, to improve the efficiency of supplies, to ensure supplies safety, reliability and traceability.

Thermal insulation of a cryogenic tank for a space telescope using a pretensioned suspension of Fiber Reinforced Composite (FRC)

NASA Astrophysics Data System (ADS)

Bongers, Bernd; Haider, Otmar; Tauber, Wolfgang

1990-09-01

For the thermal insulation of cryogenic tanks in satellite applications Fiber Reinforced Composite (FRC) materials are preferable because of their low thermal conductivity and high tensile strength compared to metallic materials. At the Infrared Space Observatory (ISO) satellite the main Liquid Helium (LHe) tank is suspended by one spatial framework and eight pretensioned chain strands at each side. Frameworks and chain strands are acting as a thermal barrier and therefore made of FRC. To meet the various and, in parts contractive requirements, sophisticated design approaches are chosen for the structural parts.

The evolving role of supply chain management technology in healthcare.

PubMed

Langabeer, Jim

2005-01-01

The healthcare supply chain is a vast, disintegrated network of products and players, loosely held together by manual and people-intensive processes. Managing the flow of information, supplies, equipment, and services from manufacturers to distributors to providers of care is especially difficult in clinical supply chains, compared with more technology-intense industries like consumer goods or industrial manufacturing. As supplies move downstream towards hospitals and clinics, the quality and robustness of accompanying management and information systems used to manage these products deteriorates significantly. Technology that provides advanced planning, synchronization, and collaboration upstream at the large supply manufacturers and distributors rarely is used at even the world's larger and more sophisticated hospitals. This article outlines the current state of healthcare supply chain management technologies, addresses potential reasons for the lack of adoption of technologies and provides a roadmap for the evolution of technology for the future. This piece is based on both quantitative and qualitative research assessments of the healthcare supply chain conducted during the last two years.

X-framework: Space system failure analysis framework

NASA Astrophysics Data System (ADS)

Newman, John Steven

Space program and space systems failures result in financial losses in the multi-hundred million dollar range every year. In addition to financial loss, space system failures may also represent the loss of opportunity, loss of critical scientific, commercial and/or national defense capabilities, as well as loss of public confidence. The need exists to improve learning and expand the scope of lessons documented and offered to the space industry project team. One of the barriers to incorporating lessons learned include the way in which space system failures are documented. Multiple classes of space system failure information are identified, ranging from "sound bite" summaries in space insurance compendia, to articles in journals, lengthy data-oriented (what happened) reports, and in some rare cases, reports that treat not only the what, but also the why. In addition there are periodically published "corporate crisis" reports, typically issued after multiple or highly visible failures that explore management roles in the failure, often within a politically oriented context. Given the general lack of consistency, it is clear that a good multi-level space system/program failure framework with analytical and predictive capability is needed. This research effort set out to develop such a model. The X-Framework (x-fw) is proposed as an innovative forensic failure analysis approach, providing a multi-level understanding of the space system failure event beginning with the proximate cause, extending to the directly related work or operational processes and upward through successive management layers. The x-fw focus is on capability and control at the process level and examines: (1) management accountability and control, (2) resource and requirement allocation, and (3) planning, analysis, and risk management at each level of management. The x-fw model provides an innovative failure analysis approach for acquiring a multi-level perspective, direct and indirect causation of failures, and generating better and more consistent reports. Through this approach failures can be more fully understood, existing programs can be evaluated and future failures avoided. The x-fw development involved a review of the historical failure analysis and prevention literature, coupled with examination of numerous failure case studies. Analytical approaches included use of a relational failure "knowledge base" for classification and sorting of x-fw elements and attributes for each case. In addition a novel "management mapping" technique was developed as a means of displaying an integrated snapshot of indirect causes within the management chain. Further research opportunities will extend the depth of knowledge available for many of the component level cases. In addition, the x-fw has the potential to expand the scope of space sector lessons learned, and contribute to knowledge management and organizational learning.

Spontaneous chiral resolution of a rare 3D self-penetration coordination polymer for sensitive aqueous-phase detection of picric acid.

PubMed

Song, Bai-Qiao; Qin, Chao; Zhang, Yu-Teng; Wu, Xue-Song; Yang, Liu; Shao, Kui-Zhan; Su, Zhong-Min

2015-11-14

Two unprecedented homochiral enantiomers based on two different kinds of rigid ligands, namely [Cd(NDC)L]2·H2O (1R and 1L), have been synthesized under hydrothermal conditions through spontaneous resolution. Their structures were determined by single-crystal X-ray diffraction analysis and further characterized by elemental analysis, IR, and thermogravimetric (TG) analysis. The resulting framework 1, constructed by four kinds of homo-handed helical chains represents the first 3D self-penetrating framework formed by decoration of single (10,3)-a net with helical chains. The single (10,3)-a net in 1 formed by three kinds of different homo-handed helical chains is different from the standard one, which should be ascribed to the usage of V-shaped ligand L. A unique self-penetration motif can be discovered in 1 where one helical chain alternately passes through 10-membered shortest circuits linked to each other and in contrary, the corresponding circuits are bound to the helical chain. Interestingly, 1 exhibits fluorescent emission in both the solid and solution phase. The uncoordinated nitrogen atom and amino group from the triazole core on the crystal surface make it suitable to detect picric acid in water. The luminescence intensity of 1 in water can be efficiently quenched by the addition of picric acid (PA). The sensitive detection of PA can be continuously performed for at least five cycles without diminishing the fluorescence intensity and destroying the framework structure of 1. The possible quenching mechanisms for PA are also investigated.

Optimizing the DoD Supply Chain for the Future Joint Force

DTIC Science & Technology

2013-05-01

4 Sunil Chopra and Peter Meindl, Supply Chain Management: Strategy, Planning, and Operation, 5th ed. (Boston: Pearson Education, Inc., 2013), 339...Arlington, VA: Lexington Institute, 2005. Chopra, Sunil and Peter Meindl. Supply Chain Management: Strategy, Planning, and Operation. 5th ed. Boston

Streamlining the supply chain.

PubMed

Neumann, Lydon

2003-07-01

Effective management of the supply chain requires attention to: Product management--formulary development and maintenance, compliance, clinical involvement, standardization, and demand-matching. Sourcing and contracting--vendor consolidation, GPO portfolio management, price leveling, content management, and direct contracting Purchasing and payment-cycle--automatic placement, web enablement, centralization, evaluated receipts settlement, and invoice matching Inventory and distribution management--"unofficial" and "official" locations, vendor-managed inventory, automatic replenishment, and freight management.

The sustainability and performance measurement on supply chain in services industry: A literature review

NASA Astrophysics Data System (ADS)

Leksono, Eko Budi; Suparno, Vanany, Iwan

2017-11-01

The services industry growth has been significant relation with economic growth. A new paradigm is needed for services sector development. The supply chain and performance measurement able to sustain of services industry growth. The supply chain implementation in the services industry called service supply chain (SSC). The globalization and stakeholder pressure makes operation of SSC should more attention to sustainability issue which consists of economic, social and environment simultaneously on SSC. Furthermore, services industry can develop by implementation of the sustainable SSC and its performance measurement. The sustainable SSC implementation can minimize of negative operation effect to environment and social, and maximize of profit. Sustainable service supply chain performance measurements (SSSCPM) are still less explored. The purpose of this paper is to review the literature in the field SSC, SSSC, SSC performance measurement (SSCPM) and SSSCPM for identification of the SSSCPM frameworks and indicators. Beside, the result of review able to look opportunities for develop a new framework for SSSCPM at the operational level, tactical and strategic, multiplayer and close loop, the effectiveness of the integration and development of modeling and simulation for evaluation in the future.

Risk evaluation framework and selected metrics for tank cars carrying hazardous materials.

DOT National Transportation Integrated Search

2015-05-01

This report presents an analysis of train accident and hazmat release data to quantify the likelihood of a hazmat release. The harm caused : by a hazmat release is characterized as the end result of a chain of events, with each link in the chain bein...

75 FR 59238 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

...; Associated Form; and OMB Number: Leading Edge Supply Chain Survey; OMB Number 0701-TBD. Needs and Uses: This study seeks to uncover the emerging trends in supply chain management (SCM) practices, processes and... individuals with in depth experience in commercial supply chain management. Dated: August 27, 2010. Patricia L...

Promise and problems with supply chain management approaches to health care purchasing.

PubMed

Ford, Eric W; Scanlon, Dennis P

2007-01-01

Double-digit health care inflation, coupled with widespread reports of poor care quality and deadly medical errors, has caused private sector employers to reevaluate their health benefits purchasing strategies, with a focus on supply chain management approaches. In other industries, this strategy has proven to be an effective method for simultaneously reducing costs and increasing quality. This article describes four current applications of supply chain management network methodologies to health care systems and identifies potential ways to improve purchasers' return on investment. In particular, information exchanges, purchase decision, and payment agreement components of integrated supply chains are described. First, visual depictions of the health care supply chain are developed from a purchaser's perspective. Next, five nationwide programs designed to realign incentives and rewards across the health care supply chain are described. Although several nationwide efforts are gaining traction in the marketplace, at this time, no cost reduction and quality improvement program initiative appears to systematically align the entire health care supply chain from providers to purchasers, raising doubt about the ability of supply chain management network techniques to significantly impact the health care marketplace in the short run. Current individual efforts to coordinate the health care supply chain do not act on all of the actors necessary to improve outcomes, promote safety, and control costs. Nevertheless, there are indications that several of the individual efforts are coming together. If national efforts touching on all critical elements can coordinate with purchasers, then the health care supply chain's performance may improve significantly.

Managing differences: the central challenge of global strategy.

PubMed

Ghemawat, Pankaj

2007-03-01

The main goal of any international strategy should be to manage the large differences that arise at the borders of markets. Yet executives often fail to exploit market and production discrepancies, focusing instead on the tensions between standardization and localization. In this article, Pankaj Ghemawat presents a new framework that encompasses all three effective responses to the challenges of globalization. He calls it the AAA Triangle. The A's stand for the three distinct types of international strategy. Through adaptation, companies seek to boost revenues and market share by maximizing their local relevance. Through aggregation, they attempt to deliver economies of scale by creating regional, or sometimes global, operations. And through arbitrage, they exploit disparities between national or regional markets, often by locating different parts of the supply chain in different places--for instance, call centers in India, factories in China, and retail shops in Western Europe. Ghemawat draws on several examples that illustrate how organizations use and balance these strategies and describes the trade-offs they make as they do so. Because most enterprises should draw from all three A's to some extent, the framework can be used to develop a summary scorecard indicating how well the company is globalizing. However, given the tensions among the strategies, it's not enough simply to tick off the corresponding boxes. Strategic choice requires some degree of prioritization--and the framework can help with that as well. While it is possible to make progress on all three strategies, companies usually must focus on one or two when trying to build competitive advantage.

National Laboratory Planning: Developing Sustainable Biocontainment Laboratories in Limited Resource Areas

PubMed Central

Adams, Martin; Stamper, Paul D.; Dasgupta, Debanjana; Hewson, Roger; Buck, Charles D.; Richards, Allen L.; Hay, John

2016-01-01

Strategic laboratory planning in limited resource areas is essential for addressing global health security issues. Establishing a national reference laboratory, especially one with BSL-3 or -4 biocontainment facilities, requires a heavy investment of resources, a multisectoral approach, and commitments from multiple stakeholders. We make the case for donor organizations and recipient partners to develop a comprehensive laboratory operations roadmap that addresses factors such as mission and roles, engaging national and political support, securing financial support, defining stakeholder involvement, fostering partnerships, and building trust. Successful development occurred with projects in African countries and in Azerbaijan, where strong leadership and a clear management framework have been key to success. A clearly identified and agreed management framework facilitate identifying the responsibility for developing laboratory capabilities and support services, including biosafety and biosecurity, quality assurance, equipment maintenance, supply chain establishment, staff certification and training, retention of human resources, and sustainable operating revenue. These capabilities and support services pose rate-limiting yet necessary challenges. Laboratory capabilities depend on mission and role, as determined by all stakeholders, and demonstrate the need for relevant metrics to monitor the success of the laboratory, including support for internal and external audits. Our analysis concludes that alternative frameworks for success exist for developing and implementing capabilities at regional and national levels in limited resource areas. Thus, achieving a balance for standardizing practices between local procedures and accepted international standards is a prerequisite for integrating new facilities into a country's existing public health infrastructure and into the overall international scientific community. PMID:27559843

Advancing Cost-Effective Readiness by Improving the Supply Chain Management of Sparse, Intermittently-Demanded Parts

DTIC Science & Technology

2015-03-26

DEMANDED PARTS DISSERTATION Gregory H. Gehret AFIT-ENS-DS-15-M- 256 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE...protection in the United States. AFIT-ENS-DS-15-M- 256 ADVANCING COST-EFFECTIVE READINESS BY IMPROVING THE SUPPLY CHAIN MANAGEMENT OF SPARSE...RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENS-DS-15-M- 256 ADVANCING COST-EFFECTIVE READINESS BY IMPROVING THE SUPPLY CHAIN MANAGEMENT OF SPARSE

Developing Tailored Supply Strategies

DTIC Science & Technology

2007-01-01

David J . Closs, and M. Bixby Cooper, Supply Chain Logistics Management, New York: McGraw-Hill, 2002. Burt, David N., and Richard L. Pinkerton, A ...Supply Chain Management, Vol. 37, No. 2, Spring 2001, pp. 8–15. Bibliography 119 Coyle, John J ., Edward J . Bardi , and C. John Langley Jr., The...Gelderman, Cees J ., and Arjan J . van Weele, “Strategic Direction Through Purchasing Portfolio Management: A Case Study,” The Journal of Supply Chain

50 CFR 648.79 - Surfclam and ocean quahog framework adjustments to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Surfclam and ocean quahog framework adjustments to management measures. (a) Within season management action... the FMP instead of a framework adjustment. (2) MAFMC recommendation. After developing management... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Surfclam and ocean quahog framework...

50 CFR 648.79 - Surfclam and ocean quahog framework adjustments to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Surfclam and ocean quahog framework adjustments to management measures. (a) Within season management action... the FMP instead of a framework adjustment. (2) MAFMC recommendation. After developing management... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Surfclam and ocean quahog framework...

50 CFR 648.79 - Surfclam and ocean quahog framework adjustments to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Surfclam and ocean quahog framework adjustments to management measures. (a) Within season management action... the FMP instead of a framework adjustment. (2) MAFMC recommendation. After developing management... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Surfclam and ocean quahog framework...

Construction and Application of a Refined Hospital Management Chain.

PubMed

Lihua, Yi

2016-01-01

Large scale development was quite common in the later period of hospital industrialization in China. Today, Chinese hospital management faces such problems as service inefficiency, high human resources cost, and low rate of capital use. This study analyzes the refined management chain of Wuxi No.2 People's Hospital. This consists of six gears namely, "organizational structure, clinical practice, outpatient service, medical technology, and nursing care and logistics." The gears are based on "flat management system targets, chief of medical staff, centralized outpatient service, intensified medical examinations, vertical nursing management and socialized logistics." The core concepts of refined hospital management are optimizing flow process, reducing waste, improving efficiency, saving costs, and taking good care of patients as most important. Keywords: Hospital, Refined, Management chain

General overview of the disaster management framework in Cameroon.

PubMed

Bang, Henry Ngenyam

2014-07-01

Efficient and effective disaster management will prevent many hazardous events from becoming disasters. This paper constitutes the most comprehensive document on the natural disaster management framework of Cameroon. It reviews critically disaster management in Cameroon, examining the various legislative, institutional, and administrative frameworks that help to facilitate the process. Furthermore, it illuminates the vital role that disaster managers at the national, regional, and local level play to ease the process. Using empirical data, the study analyses the efficiency and effectiveness of the actions of disaster managers. Its findings reveal inadequate disaster management policies, poor coordination between disaster management institutions at the national level, the lack of trained disaster managers, a skewed disaster management system, and a top-down hierarchical structure within Cameroon's disaster management framework. By scrutinising the disaster management framework of the country, policy recommendations based on the research findings are made on the institutional and administrative frameworks. © 2014 The Author(s). Disasters © Overseas Development Institute, 2014.

The Legacy Ecosystem Management Framework: From Theory to Application in the Detention Pond Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coty, J; Stevenson, M; Vogt, K A

The Detention Pond is a constructed and lined storm water treatment basin at Lawrence Livermore National Laboratory that serves multiple stakeholder objectives and programmatic goals. This paper examines the process and outcome involved in the development of a new management plan for the Detention Pond. The plan was created using a new ecosystem management tool, the Legacy Framework. This stakeholder-driven conceptual framework provides an interdisciplinary methodology for determining ecosystem health, appropriate management strategies, and sensitive indicators. The conceptual framework, the Detention Ponds project, and the use of the framework in the context of the project, are described and evaluated, andmore » evaluative criteria for this and other ecosystem management frameworks are offered. The project benefited in several ways from use of the Legacy Framework, although refinements to the framework are suggested. The stakeholder process created a context and environment in which team members became receptive to using an ecosystem management approach to evaluate and support management alternatives previously not considered. This allowed for the unanimous agreement to pursue support from upper management and organizational funding to implement a progressive management strategy. The greatly improved stakeholder relations resulted in upper management support for the project.« less

Increasing Capacity Exploitation in Food Supply Chains Using Grid Concepts

NASA Astrophysics Data System (ADS)

Volk, Eugen; Müller, Marcus; Jacob, Ansger; Racz, Peter; Waldburger, Martin

Food supply chains today are characterized by fixed trade relations with long term contracts established between heterogeneous supply chain companies. Production and logistics capacities of these companies are often utilized in an economically inefficient manner only. In addition, increased consumer awareness in food safety issues renders supply chain management even more challenging, since integrated tracking and tracing along the whole food supply chain is needed. Facing these issues of supply chain management complexity and completely documented product quality, this paper proposes a full lifecycle solution for dynamic capacity markets based on concepts used in the field of Grid [1], like management of Virtual Organization (VO) combined with Service Level Agreement (SLA). The solution enables the cost-efficient utilization of real world capacities (e.g., production capacities or logistics facilities) by using a simple, browser-based portal. Users are able to enter into product-specific negotiations with buyers and suppliers of a food supply chain, and to obtain real-time access to product information including SLA evaluation reports. Thus, business opportunities in wider market access, process innovation, and trustworthy food products are offered for participating supply chain companies.

U.S. healthcare fix: leveraging the lessons from the food supply chain.

PubMed

Kumar, Sameer; Blair, John T

2013-01-01

U.S. healthcare costs consistently outpace inflation, causing growing problems of affordability. This trend cannot be sustained indefinitely. The purpose of this study is to use supply-chain tools for macro-level examination of the U.S. healthcare as a business system and identify options and best use practices. We compare the important and successful U.S. food industry to the essential but problematic U.S. healthcare industry. Supply chain strategies leading to food business operations success are examined and healthcare applications suggested. We emphasize "total cost of ownership" which includes all costs incurred by all stakeholders of U.S. healthcare, including maintenance and cleanup, not just the initial purchase price. U.S. hospitals and clinics can use supply chain strategies in a total cost of ownership framework to reduce healthcare costs while maintaining patient care quality. Supply chain strategies of resource pooling, mass customization, centralized logistics, specialization, postponement and continuous improvement that have been successfully used in the U.S. food industry should be more widely applied to the U.S. healthcare industry. New and growing areas of telemedicine and medical tourism should be included in the supply chain analysis of U.S. healthcare. Valid statistical analysis of results in all areas of U.S. healthcare is an important part of the process. U.S. healthcare industry problems are systematic operational and supply chain problems rather than problems with workforce or technology. Examination of the U.S. healthcare industry through a supply chain framework should lead to significant operational improvement in both prevention and treatment of acute and chronic ailments. A rational and unemotional reorganization of the U.S. healthcare system operations, using supply chain strategies, should help reduce healthcare costs while maintaining quality and increasing accessibility.

Fuzzy Entropy Method for Quantifying Supply Chain Networks Complexity

NASA Astrophysics Data System (ADS)

Zhang, Jihui; Xu, Junqin

Supply chain is a special kind of complex network. Its complexity and uncertainty makes it very difficult to control and manage. Supply chains are faced with a rising complexity of products, structures, and processes. Because of the strong link between a supply chain’s complexity and its efficiency the supply chain complexity management becomes a major challenge of today’s business management. The aim of this paper is to quantify the complexity and organization level of an industrial network working towards the development of a ‘Supply Chain Network Analysis’ (SCNA). By measuring flows of goods and interaction costs between different sectors of activity within the supply chain borders, a network of flows is built and successively investigated by network analysis. The result of this study shows that our approach can provide an interesting conceptual perspective in which the modern supply network can be framed, and that network analysis can handle these issues in practice.

Teaching Teachers about Supply Chain Management to Influence Students' Career and Education Choices

ERIC Educational Resources Information Center

Gardner, Leslie L.

2013-01-01

Since teachers are influential in high school students' career choices, enabling high school teachers to introduce educational and career opportunities in supply chain management is a viable strategy for reaching high school students about these opportunities. This article presents a pilot program of supply chain workshops to educate high school…

Chantey Castings: A Hands-On Simulation to Teach Constraint Management and Demand-Driven Supply Chain Approaches

ERIC Educational Resources Information Center

Grandzol, Christian J.; Grandzol, John R.

2018-01-01

Supply chain design and constraint management are widely-adopted techniques in industry, necessitating that operations and supply chain educators teach these topics in ways that enhance student learning and retention, optimize resource utilization (especially time), and maximize student interest. The Chantey Castings Simulation provides a platform…

Development of an economic framework to evaluate resilience in recovering from major port disruptions : final report.

DOT National Transportation Integrated Search

2017-02-03

Ports play a critical role in a nations economic system. The impact of a major port disruption can reverberate across the entire economy through regional and national supply-chains. This study develops an operational framework to evaluate the effe...

Novel electrorheological properties of a metal-organic framework Cu3(BTC)2.

PubMed

Liu, Ying Dan; Kim, Jun; Ahn, Wha-Seung; Choi, Hyoung Jin

2012-06-07

A metal-organic framework, Cu(3)(BTC)(2), was synthesized and applied as an electro-responsive electrorheological material dispersed in insulating oil. Powder of crystalline Cu(3)(BTC)(2) exhibited excellent chain-like structures and controllable rheological properties in an applied electric field.

Enabler for the agile virtual enterprise

NASA Astrophysics Data System (ADS)

Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

2001-10-01

In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

ScMO(BO3) (M = Ca and Cd): new Sc-based oxyborates featuring interesting edge-sharing sandwich-like chains and UV cut-off edges.

PubMed

Ma, Ruru; Xu, Dongdong; Yang, Yun; Su, Xin; Lei, Binghua; Yang, Zhihua; Pan, Shilie

2017-11-07

Two new isostructural rare-earth oxyborates ScMO(BO 3 ) (M = Ca and Cd) with a three-dimensional (3D) cationic framework and parallel arranged [BO 3 ] triangles have been synthesized by the flux method. In the 3D cationic framework, an interesting sandwich-like basic building unit (BBU) is constructed by two [Ca(1)O 4 ] 6- chains and two [Sc(1)O 4 ] 5- chains. ScMO(BO 3 ) melt incongruently, which shows that title compounds can be grown by the flux method. The UV cut-off edges for ScCaO(BO 3 ) and ScCdO(BO 3 ) are 230 and 249 nm, respectively. In addition, the first-principles calculations are performed to gain further insights into the relationship between the microscopic electronic structures and associated optical properties.

The Chain-Link Fence Model: A Framework for Creating Security Procedures

ERIC Educational Resources Information Center

Houghton, Robert F.

2013-01-01

A long standing problem in information technology security is how to help reduce the security footprint. Many specific proposals exist to address specific problems in information technology security. Most information technology solutions need to be repeatable throughout the course of an information systems lifecycle. The Chain-Link Fence Model is…

Evaluating Equating Results: Percent Relative Error for Chained Kernel Equating

ERIC Educational Resources Information Center

Jiang, Yanlin; von Davier, Alina A.; Chen, Haiwen

2012-01-01

This article presents a method for evaluating equating results. Within the kernel equating framework, the percent relative error (PRE) for chained equipercentile equating was computed under the nonequivalent groups with anchor test (NEAT) design. The method was applied to two data sets to obtain the PRE, which can be used to measure equating…

An Interoperable Architecture for Air Pollution Early Warning System Based on Sensor Web

NASA Astrophysics Data System (ADS)

Samadzadegan, F.; Zahmatkesh, H.; Saber, M.; Ghazi khanlou, H. J.

2013-09-01

Environmental monitoring systems deal with time-sensitive issues which require quick responses in emergency situations. Handling the sensor observations in near real-time and obtaining valuable information is challenging issues in these systems from a technical and scientific point of view. The ever-increasing population growth in urban areas has caused certain problems in developing countries, which has direct or indirect impact on human life. One of applicable solution for controlling and managing air quality by considering real time and update air quality information gathered by spatially distributed sensors in mega cities, using sensor web technology for developing monitoring and early warning systems. Urban air quality monitoring systems using functionalities of geospatial information system as a platform for analysing, processing, and visualization of data in combination with Sensor Web for supporting decision support systems in disaster management and emergency situations. This system uses Sensor Web Enablement (SWE) framework of the Open Geospatial Consortium (OGC), which offers a standard framework that allows the integration of sensors and sensor data into spatial data infrastructures. SWE framework introduces standards for services to access sensor data and discover events from sensor data streams as well as definition set of standards for the description of sensors and the encoding of measurements. The presented system provides capabilities to collect, transfer, share, process air quality sensor data and disseminate air quality status in real-time. It is possible to overcome interoperability challenges by using standard framework. In a routine scenario, air quality data measured by in-situ sensors are communicated to central station where data is analysed and processed. The extracted air quality status is processed for discovering emergency situations, and if necessary air quality reports are sent to the authorities. This research proposed an architecture to represent how integrate air quality sensor data stream into geospatial data infrastructure to present an interoperable air quality monitoring system for supporting disaster management systems by real time information. Developed system tested on Tehran air pollution sensors for calculating Air Quality Index (AQI) for CO pollutant and subsequently notifying registered users in emergency cases by sending warning E-mails. Air quality monitoring portal used to retrieving and visualize sensor observation through interoperable framework. This system provides capabilities to retrieve SOS observation using WPS in a cascaded service chaining pattern for monitoring trend of timely sensor observation.

A multi-objective approach to solid waste management.

PubMed

Galante, Giacomo; Aiello, Giuseppe; Enea, Mario; Panascia, Enrico

2010-01-01

The issue addressed in this paper consists in the localization and dimensioning of transfer stations, which constitute a necessary intermediate level in the logistic chain of the solid waste stream, from municipalities to the incinerator. Contextually, the determination of the number and type of vehicles involved is carried out in an integrated optimization approach. The model considers both initial investment and operative costs related to transportation and transfer stations. Two conflicting objectives are evaluated, the minimization of total cost and the minimization of environmental impact, measured by pollution. The design of the integrated waste management system is hence approached in a multi-objective optimization framework. To determine the best means of compromise, goal programming, weighted sum and fuzzy multi-objective techniques have been employed. The proposed analysis highlights how different attitudes of the decision maker towards the logic and structure of the problem result in the employment of different methodologies and the obtaining of different results. The novel aspect of the paper lies in the proposal of an effective decision support system for operative waste management, rather than a further contribution to the transportation problem. The model was applied to the waste management of optimal territorial ambit (OTA) of Palermo (Italy). 2010 Elsevier Ltd. All rights reserved.

A multi-objective approach to solid waste management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galante, Giacomo, E-mail: galante@dtpm.unipa.i; Aiello, Giuseppe; Enea, Mario

2010-08-15

The issue addressed in this paper consists in the localization and dimensioning of transfer stations, which constitute a necessary intermediate level in the logistic chain of the solid waste stream, from municipalities to the incinerator. Contextually, the determination of the number and type of vehicles involved is carried out in an integrated optimization approach. The model considers both initial investment and operative costs related to transportation and transfer stations. Two conflicting objectives are evaluated, the minimization of total cost and the minimization of environmental impact, measured by pollution. The design of the integrated waste management system is hence approached inmore » a multi-objective optimization framework. To determine the best means of compromise, goal programming, weighted sum and fuzzy multi-objective techniques have been employed. The proposed analysis highlights how different attitudes of the decision maker towards the logic and structure of the problem result in the employment of different methodologies and the obtaining of different results. The novel aspect of the paper lies in the proposal of an effective decision support system for operative waste management, rather than a further contribution to the transportation problem. The model was applied to the waste management of optimal territorial ambit (OTA) of Palermo (Italy).« less

Partitioning ecosystems for sustainability.

PubMed

Murray, Martyn G

2016-03-01

Decline in the abundance of renewable natural resources (RNRs) coupled with increasing demands of an expanding human population will greatly intensify competition for Earth's natural resources during this century, yet curiously, analytical approaches to the management of productive ecosystems (ecological theory of wildlife harvesting, tragedy of the commons, green economics, and bioeconomics) give only peripheral attention to the driving influence of competition on resource exploitation. Here, I apply resource competition theory (RCT) to the exploitation of RNRs and derive four general policies in support of their sustainable and equitable use: (1) regulate resource extraction technology to avoid damage to the resource base; (2) increase efficiency of resource use and reduce waste at every step in the resource supply chain and distribution network; (3) partition ecosystems with the harvesting niche as the basic organizing principle for sustainable management of natural resources by multiple users; and (4) increase negative feedback between consumer and resource to bring about long-term sustainable use. A simple policy framework demonstrates how RCT integrates with other elements of sustainability science to better manage productive ecosystems. Several problem areas of RNR management are discussed in the light of RCT, including tragedy of the commons, overharvesting, resource collapse, bycatch, single species quotas, and simplification of ecosystems.

Dynamics Sampling in Transition Pathway Space.

PubMed

Zhou, Hongyu; Tao, Peng

2018-01-09

The minimum energy pathway contains important information describing the transition between two states on a potential energy surface (PES). Chain-of-states methods were developed to efficiently calculate minimum energy pathways connecting two stable states. In the chain-of-states framework, a series of structures are generated and optimized to represent the minimum energy pathway connecting two states. However, multiple pathways may exist connecting two existing states and should be identified to obtain a full view of the transitions. Therefore, we developed an enhanced sampling method, named as the direct pathway dynamics sampling (DPDS) method, to facilitate exploration of a PES for multiple pathways connecting two stable states as well as addition minima and their associated transition pathways. In the DPDS method, molecular dynamics simulations are carried out on the targeting PES within a chain-of-states framework to directly sample the transition pathway space. The simulations of DPDS could be regulated by two parameters controlling distance among states along the pathway and smoothness of the pathway. One advantage of the chain-of-states framework is that no specific reaction coordinates are necessary to generate the reaction pathway, because such information is implicitly represented by the structures along the pathway. The chain-of-states setup in a DPDS method greatly enhances the sufficient sampling in high-energy space between two end states, such as transition states. By removing the constraint on the end states of the pathway, DPDS will also sample pathways connecting minima on a PES in addition to the end points of the starting pathway. This feature makes DPDS an ideal method to directly explore transition pathway space. Three examples demonstrate the efficiency of DPDS methods in sampling the high-energy area important for reactions on the PES.

An Architecture for Automated Fire Detection Early Warning System Based on Geoprocessing Service Composition

NASA Astrophysics Data System (ADS)

Samadzadegan, F.; Saber, M.; Zahmatkesh, H.; Joze Ghazi Khanlou, H.

2013-09-01

Rapidly discovering, sharing, integrating and applying geospatial information are key issues in the domain of emergency response and disaster management. Due to the distributed nature of data and processing resources in disaster management, utilizing a Service Oriented Architecture (SOA) to take advantages of workflow of services provides an efficient, flexible and reliable implementations to encounter different hazardous situation. The implementation specification of the Web Processing Service (WPS) has guided geospatial data processing in a Service Oriented Architecture (SOA) platform to become a widely accepted solution for processing remotely sensed data on the web. This paper presents an architecture design based on OGC web services for automated workflow for acquisition, processing remotely sensed data, detecting fire and sending notifications to the authorities. A basic architecture and its building blocks for an automated fire detection early warning system are represented using web-based processing of remote sensing imageries utilizing MODIS data. A composition of WPS processes is proposed as a WPS service to extract fire events from MODIS data. Subsequently, the paper highlights the role of WPS as a middleware interface in the domain of geospatial web service technology that can be used to invoke a large variety of geoprocessing operations and chaining of other web services as an engine of composition. The applicability of proposed architecture by a real world fire event detection and notification use case is evaluated. A GeoPortal client with open-source software was developed to manage data, metadata, processes, and authorities. Investigating feasibility and benefits of proposed framework shows that this framework can be used for wide area of geospatial applications specially disaster management and environmental monitoring.

Superprotonic conduction through one-dimensional ordered alkali metal ion chains in a lanthanide-organic framework

DOE PAGES

Wang, Xia; Wang, Yanlong; Silver, Mark A.; ...

2018-01-01

An ultrahigh proton conductivity of 2.91 × 10 −2 S cm −1 and an ultralow activation energy of 0.10 eV were observed in an anionic lanthanide-organic framework. Both values approach the records for proton-conducting MOF materials.

An algorithm for converting a virtual-bond chain into a complete polypeptide backbone chain

NASA Technical Reports Server (NTRS)

Luo, N.; Shibata, M.; Rein, R.

1991-01-01

A systematic analysis is presented of the algorithm for converting a virtual-bond chain, defined by the coordinates of the alpha-carbons of a given protein, into a complete polypeptide backbone. An alternative algorithm, based upon the same set of geometric parameters used in the Purisima-Scheraga algorithm but with a different "linkage map" of the algorithmic procedures, is proposed. The global virtual-bond chain geometric constraints are more easily separable from the loal peptide geometric and energetic constraints derived from, for example, the Ramachandran criterion, within the framework of this approach.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

PubMed Central

Chaharsooghi, S. K.; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis. PMID:27379267

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method.

PubMed

Chaharsooghi, S K; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis.

Enabling the sustainable Faecal Sludge Management service delivery chain-A case study of dense settlements in Kigali, Rwanda.

PubMed

Akumuntu, Jean Baptiste; Wehn, Uta; Mulenga, Martin; Brdjanovic, Damir

2017-08-01

The lack of access to basic sanitation is a global concern and alarmingly prevalent in low- and middle- income countries. In the densely populated settlements of these countries, on-site sanitation systems are usually the only feasible option because dwellers there have no sewers in place to connect to. Using on-site sanitation facilities results in an accumulation of faecal sludge which needs to be properly managed to ensure the well-being of the users as well as the surrounding environment. Unfortunately, often the conditions for faecal sludge management (FSM) within dense settlements are adverse and thus hamper sustainable FSM. We use the normative framework of the FSM enabling environment to gather empirical evidence from densely populated settlements of Kigali city in Rwanda to examine current FSM practices and the extent to which these are being influenced and affected by the setting within which they are taking place. The analysis of the study findings confirms that the existing conditions for FSM in these settlements are inadequate. The specific constraints that hinder the achievement of sustainable FSM include limited government focus on the sanitation sector, high turnover of staff in relevant government institutions, pit sludge management is not placed on the sanitation projects agenda, the existing relevant bylaws are not pro-poor oriented, a lack of clear responsibilities, a lack of relevant local professional training opportunities, unaffordability of FSM services and an inhibition to discuss FSM. Drawing on the involved stakeholders' own perceptions and suggestions, we identify possible approaches to overcome the identified constraints and to allow all actors in the FSM chain to contribute effectively to the management of faecal sludge in densely populated low-income urban settlements. Finally, our study also presents a contribution to the theoretical conceptualisation of the enabling environment for sustainable FSM. Copyright © 2017 Elsevier GmbH. All rights reserved.

50 CFR 648.108 - Framework adjustments to management measures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Framework adjustments to management measures. 648.108 Section 648.108 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Summer Flounder Fisheries § 648.108 Framework adjustments to management measures...

An integrated framework for detecting suspicious behaviors in video surveillance

NASA Astrophysics Data System (ADS)

Zin, Thi Thi; Tin, Pyke; Hama, Hiromitsu; Toriu, Takashi

2014-03-01

In this paper, we propose an integrated framework for detecting suspicious behaviors in video surveillance systems which are established in public places such as railway stations, airports, shopping malls and etc. Especially, people loitering in suspicion, unattended objects left behind and exchanging suspicious objects between persons are common security concerns in airports and other transit scenarios. These involve understanding scene/event, analyzing human movements, recognizing controllable objects, and observing the effect of the human movement on those objects. In the proposed framework, multiple background modeling technique, high level motion feature extraction method and embedded Markov chain models are integrated for detecting suspicious behaviors in real time video surveillance systems. Specifically, the proposed framework employs probability based multiple backgrounds modeling technique to detect moving objects. Then the velocity and distance measures are computed as the high level motion features of the interests. By using an integration of the computed features and the first passage time probabilities of the embedded Markov chain, the suspicious behaviors in video surveillance are analyzed for detecting loitering persons, objects left behind and human interactions such as fighting. The proposed framework has been tested by using standard public datasets and our own video surveillance scenarios.

An intelligent service matching method for mechanical equipment condition monitoring using the fibre Bragg grating sensor network

NASA Astrophysics Data System (ADS)

Zhang, Fan; Zhou, Zude; Liu, Quan; Xu, Wenjun

2017-02-01

Due to the advantages of being able to function under harsh environmental conditions and serving as a distributed condition information source in a networked monitoring system, the fibre Bragg grating (FBG) sensor network has attracted considerable attention for equipment online condition monitoring. To provide an overall conditional view of the mechanical equipment operation, a networked service-oriented condition monitoring framework based on FBG sensing is proposed, together with an intelligent matching method for supporting monitoring service management. In the novel framework, three classes of progressive service matching approaches, including service-chain knowledge database service matching, multi-objective constrained service matching and workflow-driven human-interactive service matching, are developed and integrated with an enhanced particle swarm optimisation (PSO) algorithm as well as a workflow-driven mechanism. Moreover, the manufacturing domain ontology, FBG sensor network structure and monitoring object are considered to facilitate the automatic matching of condition monitoring services to overcome the limitations of traditional service processing methods. The experimental results demonstrate that FBG monitoring services can be selected intelligently, and the developed condition monitoring system can be re-built rapidly as new equipment joins the framework. The effectiveness of the service matching method is also verified by implementing a prototype system together with its performance analysis.

Analysis of supply chain management of shallots in Medan

NASA Astrophysics Data System (ADS)

Alam, M. C.; Supriana, T.

2018-02-01

Supply chain is important for business. One of supply chain that needs to be studied is the shallots supply chain. Medan have high demand while the supply of shallots is limited. This study aims to analyze the flow of shallots supply chain distribution in Medan. The method used was survey by using questionnaires to shallots producers, collecting traders, distributors, traders as well as government involved in shallots supply chain. Descriptive analysis was used to explain the shallots supply chain distribution flow. The results showed that there are two shallots supply chain model in Medan that was local shallots model and imported shallots model. Local shallots model could be distinguished based on three producer area, those were models of Medan Marelan, Samosir, and Simalungun. Medan Marelan and Simalungun models have seven supply chains, while the Samosir Model has eight supply chains. This condition indicates that the local shallots supply chain management in Medan was not efficient because of the length of the distribution channel. Supply chain imported shallots was more efficient because it had a shorter distribution flow with five supply chains.

Beyond upgrading typologies - In search of a better deal for honey value chains in Brazil.

PubMed

Figueiredo Junior, Hugo S de; Meuwissen, Miranda P M; van der Lans, Ivo A; Oude Lansink, Alfons G J M

2017-01-01

Selection of value chain strategies by development practitioners and value chain participants themselves has been restricted to preset types of upgrading. This paper argues for an extension of the range of strategy solutions to value chains. An empirical application identifies successful strategies for honey value chains in Brazil for 2015-2020. Strategy and performance indicators were selected using the value chain Structure-Conduct-Performance (SCP) framework. Experts' opinion was elicited in a Delphi for business scenarios, and adaptive conjoint analysis was used to identify strategies for increasing production growth and local value-added. This study identifies important strategies beyond upgrading typologies, and finds that important strategies differ by performance goal and scenario. The value chain SCP allows searching for promising strategies towards performance-the "better deal"-in an integrated way.

Beyond upgrading typologies – In search of a better deal for honey value chains in Brazil

PubMed Central

Meuwissen, Miranda P. M.; van der Lans, Ivo A.; Oude Lansink, Alfons G. J. M.

2017-01-01

Selection of value chain strategies by development practitioners and value chain participants themselves has been restricted to preset types of upgrading. This paper argues for an extension of the range of strategy solutions to value chains. An empirical application identifies successful strategies for honey value chains in Brazil for 2015–2020. Strategy and performance indicators were selected using the value chain Structure-Conduct-Performance (SCP) framework. Experts’ opinion was elicited in a Delphi for business scenarios, and adaptive conjoint analysis was used to identify strategies for increasing production growth and local value-added. This study identifies important strategies beyond upgrading typologies, and finds that important strategies differ by performance goal and scenario. The value chain SCP allows searching for promising strategies towards performance–the “better deal”–in an integrated way. PMID:28742804

Zeolite-like liquid crystals

NASA Astrophysics Data System (ADS)

Poppe, Silvio; Lehmann, Anne; Scholte, Alexander; Prehm, Marko; Zeng, Xiangbing; Ungar, Goran; Tschierske, Carsten

2015-10-01

Zeolites represent inorganic solid-state materials with porous structures of fascinating complexity. Recently, significant progress was made by reticular synthesis of related organic solid-state materials, such as metal-organic or covalent organic frameworks. Herein we go a step further and report the first example of a fluid honeycomb mimicking a zeolitic framework. In this unique self-assembled liquid crystalline structure, transverse-lying π-conjugated rod-like molecules form pentagonal channels, encircling larger octagonal channels, a structural motif also found in some zeolites. Additional bundles of coaxial molecules penetrate the centres of the larger channels, unreachable by chains attached to the honeycomb framework. This creates a unique fluid hybrid structure combining positive and negative anisotropies, providing the potential for tuning the directionality of anisotropic optical, electrical and magnetic properties. This work also demonstrates a new approach to complex soft-matter self-assembly, by using frustration between space filling and the entropic penalty of chain extension.

Upgrading Supply Chain Management Systems to Improve Availability of Medicines in Tanzania: Evaluation of Performance and Cost Effects.

PubMed

Mwencha, Marasi; Rosen, James E; Spisak, Cary; Watson, Noel; Kisoka, Noela; Mberesero, Happiness

2017-09-27

To address challenges in public health supply chain performance, Tanzania invested in a national logistics management unit (LMU) and a national electronic logistics management information system (eLMIS). This evaluation examined the impact of those 2 key management upgrades approximately 1 year after they were introduced. We used a nonexperimental pre-post study design to compare the previous system with the upgraded management system. We collected baseline data from August to November 2013. We conducted round 1 of post-implementation data collection during April and May 2015, about 1 year after implementation of the upgrades. We evaluated key indicators of data use and reporting; supply chain management practices such as storage and supervision; supply chain performance including stock-out and expiry rates; and supply chain cost and savings. We analyzed the data using a range of techniques including statistical testing of baseline and round-1 results, and cost, cost-effectiveness, and return on investment analysis. The upgrades were associated with improvements in data use, accessibility, visibility, and transparency; planning, control, and monitoring; support for quantification; stock-out rates; stock-out duration; commodity expiry; and forecast error. The upgraded system was more costly, but it was also more efficient, particularly when adjusting for the performance improvements. The upgrades also generated substantial savings that defrayed some, but not all, of the investment costs. Upgrades to Tanzania's supply chain management systems created multiple and complex pathways to impact. One year after implementation, the LMU and eLMIS brought about performance improvements through better data use and through improvements in some, but not all, management practices. Furthermore, the upgrades-while not inexpensive-contributed to greater system efficiency and modest savings. © Mwencha et al.

Upgrading Supply Chain Management Systems to Improve Availability of Medicines in Tanzania: Evaluation of Performance and Cost Effects

PubMed Central

Mwencha, Marasi; Rosen, James E; Spisak, Cary; Watson, Noel; Kisoka, Noela; Mberesero, Happiness

2017-01-01

ABSTRACT Background: To address challenges in public health supply chain performance, Tanzania invested in a national logistics management unit (LMU) and a national electronic logistics management information system (eLMIS). This evaluation examined the impact of those 2 key management upgrades approximately 1 year after they were introduced. Methods: We used a nonexperimental pre-post study design to compare the previous system with the upgraded management system. We collected baseline data from August to November 2013. We conducted round 1 of post-implementation data collection during April and May 2015, about 1 year after implementation of the upgrades. We evaluated key indicators of data use and reporting; supply chain management practices such as storage and supervision; supply chain performance including stock-out and expiry rates; and supply chain cost and savings. We analyzed the data using a range of techniques including statistical testing of baseline and round-1 results, and cost, cost-effectiveness, and return on investment analysis. Results: The upgrades were associated with improvements in data use, accessibility, visibility, and transparency; planning, control, and monitoring; support for quantification; stock-out rates; stock-out duration; commodity expiry; and forecast error. The upgraded system was more costly, but it was also more efficient, particularly when adjusting for the performance improvements. The upgrades also generated substantial savings that defrayed some, but not all, of the investment costs. Conclusion: Upgrades to Tanzania's supply chain management systems created multiple and complex pathways to impact. One year after implementation, the LMU and eLMIS brought about performance improvements through better data use and through improvements in some, but not all, management practices. Furthermore, the upgrades—while not inexpensive—contributed to greater system efficiency and modest savings. PMID:28877933

The Ophidia framework: toward cloud-based data analytics for climate change

NASA Astrophysics Data System (ADS)

Fiore, Sandro; D'Anca, Alessandro; Elia, Donatello; Mancini, Marco; Mariello, Andrea; Mirto, Maria; Palazzo, Cosimo; Aloisio, Giovanni

2015-04-01

The Ophidia project is a research effort on big data analytics facing scientific data analysis challenges in the climate change domain. It provides parallel (server-side) data analysis, an internal storage model and a hierarchical data organization to manage large amount of multidimensional scientific data. The Ophidia analytics platform provides several MPI-based parallel operators to manipulate large datasets (data cubes) and array-based primitives to perform data analysis on large arrays of scientific data. The most relevant data analytics use cases implemented in national and international projects target fire danger prevention (OFIDIA), interactions between climate change and biodiversity (EUBrazilCC), climate indicators and remote data analysis (CLIP-C), sea situational awareness (TESSA), large scale data analytics on CMIP5 data in NetCDF format, Climate and Forecast (CF) convention compliant (ExArch). Two use cases regarding the EU FP7 EUBrazil Cloud Connect and the INTERREG OFIDIA projects will be presented during the talk. In the former case (EUBrazilCC) the Ophidia framework is being extended to integrate scalable VM-based solutions for the management of large volumes of scientific data (both climate and satellite data) in a cloud-based environment to study how climate change affects biodiversity. In the latter one (OFIDIA) the data analytics framework is being exploited to provide operational support regarding processing chains devoted to fire danger prevention. To tackle the project challenges, data analytics workflows consisting of about 130 operators perform, among the others, parallel data analysis, metadata management, virtual file system tasks, maps generation, rolling of datasets, import/export of datasets in NetCDF format. Finally, the entire Ophidia software stack has been deployed at CMCC on 24-nodes (16-cores/node) of the Athena HPC cluster. Moreover, a cloud-based release tested with OpenNebula is also available and running in the private cloud infrastructure of the CMCC Supercomputing Centre.

50 CFR 648.130 - Scup framework adjustments to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Scup framework adjustments to management measures. 648.130 Section 648.130 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Scup Fishery § 648.130 Scup framework adjustments to management measures. (a...

50 CFR 648.130 - Scup framework adjustments to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Scup framework adjustments to management measures. 648.130 Section 648.130 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Scup Fishery § 648.130 Scup framework adjustments to management measures. (a...

50 CFR 648.130 - Scup framework adjustments to management measures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Scup framework adjustments to management measures. 648.130 Section 648.130 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Scup Fishery § 648.130 Scup framework adjustments to management measures. (a...

50 CFR 648.130 - Scup framework adjustments to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Scup framework adjustments to management measures. 648.130 Section 648.130 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Scup Fishery § 648.130 Scup framework adjustments to management measures. (a...

76 FR 56770 - Food and Drug Administration/Xavier University Global Outsourcing Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

..., Pharma Case Study on How to Manage a Global Complex Supply Chain, USP : Good Storage and Distribution... through topics such as Strategic Procurement, End-to-End lifecycle product management, Managing Global Complex Supply Chains, and other topics. The experience level of our audience has fostered engaged dialog...

Cold chain management in meat storage, distribution and retail: A review

NASA Astrophysics Data System (ADS)

Nastasijević, I.; Lakićević, B.; Petrović, Z.

2017-09-01

Meat is a perishable product with a short shelf life and therefore short selling times. Therefore, cold chain management in meat supply is of utmost importance for the maintenance of quality and safety of meat/meat products. Raw meat/meat products are likely to support the growth of pathogenic microorganisms and/or spoilage bacteria, and should be kept at temperatures that do not result in a risk to health. The cold chain should not be interrupted at all times along the meat distribution chain. The complexity of global meat supply chain, with frequently long distribution chains associated with transportation of the product within one country, from one to another country and from one to another continent, makes the solutions for the chilling and freezing regimes, as well as monitoring of time-temperature profiles, very important for the overall success in delivery of product which will be accepted by consumer for its freshness and safety levels. From recently, there are several available options for control and management of the cold chain, such as chilled and frozen storage combinations, superchilling, ionizing radiation, biopreservation, high hydrostatic pressure (HHP), active packaging, wireless sensors, supported with the software-based cold chain database (CCD).

A Markov Chain Monte Carlo Approach to Confirmatory Item Factor Analysis

ERIC Educational Resources Information Center

Edwards, Michael C.

2010-01-01

Item factor analysis has a rich tradition in both the structural equation modeling and item response theory frameworks. The goal of this paper is to demonstrate a novel combination of various Markov chain Monte Carlo (MCMC) estimation routines to estimate parameters of a wide variety of confirmatory item factor analysis models. Further, I show…

The Impact of Supply Chain Business Processes on Competitive Advantage and Organizational Performance

DTIC Science & Technology

2012-03-22

Manager, Vice President (VP) Distribution & Fulfillment, Transportation Manager, VP of Supply Chain Management, Production Manager, Director of...Logistics/ Transportation /Distribution (75%), and Supply/Purchasing/Procurement (25%) were identified as functions that best describe the respondents...manufacturing industry (50%), one respondent represented the wholesale trade (12.5%), the retail trade (12.5%), and the transportation and warehousing

Habitat and environment of islands: primary and supplemental island sets

USGS Publications Warehouse

Matalas, Nicholas C.; Grossling, Bernardo F.

2002-01-01

The original intent of the study was to develop a first-order synopsis of island hydrology with an integrated geologic basis on a global scale. As the study progressed, the aim was broadened to provide a framework for subsequent assessments on large regional or global scales of island resources and impacts on those resources that are derived from global changes. Fundamental to the study was the development of a comprehensive framework?a wide range of parameters that describe a set of 'saltwater' islands sufficiently large to Characterize the spatial distribution of the world?s islands; Account for all major archipelagos; Account for almost all oceanically isolated islands, and Account collectively for a very large proportion of the total area of the world?s islands whereby additional islands would only marginally contribute to the representativeness and accountability of the island set. The comprehensive framework, which is referred to as the ?Primary Island Set,? is built on 122 parameters that describe 1,000 islands. To complement the investigations based on the Primary Island Set, two supplemental island sets, Set A?Other Islands (not in the Primary Island Set) and Set B?Lagoonal Atolls, are included in the study. The Primary Island Set, together with the Supplemental Island Sets A and B, provides a framework that can be used in various scientific disciplines for their island-based studies on broad regional or global scales. The study uses an informal, coherent, geophysical organization of the islands that belong to the three island sets. The organization is in the form of a global island chain, which is a particular sequential ordering of the islands referred to as the 'Alisida.' The Alisida was developed through a trial-and-error procedure by seeking to strike a balance between 'minimizing the length of the global chain' and 'maximizing the chain?s geophysical coherence.' The fact that an objective function cannot be minimized and maximized simultaneously indicates that the Alisida is not unique. Global island chains other than the Alisida may better serve disciplines other than those of hydrology and geology.

Modelling inter-supply chain competition with resource limitation and demand disruption

NASA Astrophysics Data System (ADS)

Chen, Zhaobo; Teng, Chunxian; Zhang, Ding; Sun, Jiayi

2016-05-01

This paper proposes a comprehensive model for studying supply chain versus supply chain competition with resource limitation and demand disruption. We assume that there are supply chains with heterogeneous supply network structures that compete at multiple demand markets. Each supply chain is comprised of internal and external firms. The internal firms are coordinated in production and distribution and share some common but limited resources within the supply chain, whereas the external firms are independent and do not share the internal resources. The supply chain managers strive to develop optimal strategies in terms of production level and resource allocation in maximising their profit while facing competition at the end market. The Cournot-Nash equilibrium of this inter-supply chain competition is formulated as a variational inequality problem. We further study the case when there is demand disruption in the plan-execution phase. In such a case, the managers need to revise their planned strategy in order to maximise their profit with the new demand under disruption and minimise the cost of change. We present a bi-criteria decision-making model for supply chain managers and develop the optimal conditions in equilibrium, which again can be formulated by another variational inequality problem. Numerical examples are presented for illustrative purpose.

Managing Food Allergens in the U.K. Retail Supply Chain.

PubMed

Walker, Michael J; Gowland, M Hazel; Points, John

2018-01-01

The U.K. food and grocery market is highly significant financially and dominated by 10 retailers within a regulated and extremely economically competitive environment. We summarize the approach of U.K. retailers to allergen risk assessment (RA) and risk management (RM) within the U.K. legal framework and explore public visibility of retailers' allergen policies. RA and RM of allergens appear effective in curtailing retail-triggered severe food allergy reactions. However, allergen recalls remain high, precautionary allergen labeling (PAL) remains an area of confusion, and there is no consistent Web-based provision of information for consumers who have allergies. Resolution of PAL awaits an agreed-on threshold framework, but a key challenge is to engage with patients and gain their trust rather than thrust education at them. It would be helpful for retailers to publish their allergen RA and RM policies. A target should be agreed on between government and retailers for a reduction in the proliferation of PAL wording variants by a given date within the next 3 years. A further hurdle is potentially flawed allergen analysis-development of reference methods and reference materials are acknowledged needs. Laboratories should report allergen results in an informative manner, communicating uncertainty and caveats. Ideally a laboratory representative would be included on any incident control team. Efforts must continue to standardize preparedness for protecting and defending food and drink from deliberate attack.

Sustainable development and next generation's health: a long-term perspective about the consequences of today's activities for food safety.

PubMed

Frazzoli, Chiara; Petrini, Carlo; Mantovani, Alberto

2009-01-01

Development is defined sustainable when it meets the needs of the present without compromising the ability of future generations to meet their own needs. Pivoting on social, environmental and economic aspects of food chain sustainability, this paper presents the concept of sustainable food safety based on the prevention of risks and burden of poor health for generations to come. Under this respect, the assessment of long-term, transgenerational risks is still hampered by serious scientific uncertainties. Critical issues to the development of a sustainable food safety framework may include: endocrine disrupters as emerging contaminants that specifically target developing organisms; toxicological risks assessment in Countries at the turning point of development; translating knowledge into toxicity indexes to support risk management approaches, such as hazard analysis and critical control points (HACCP); the interplay between chemical hazards and social determinants. Efforts towards the comprehensive knowledge and management of key factors of sustainable food safety appear critical to the effectiveness of the overall sustainability policies.

Climatic and psychosocial risks of heat illness incidents on construction site.

PubMed

Jia, Yunyan Andrea; Rowlinson, Steve; Ciccarelli, Marina

2016-03-01

The study presented in this paper aims to identify prominent risks leading to heat illness in summer among construction workers that can be prioritised for developing effective interventions. Samples are 216 construction workers' cases at the individual level and 26 construction projects cases at the organisation level. A grounded theory is generated to define the climatic heat and psychosocial risks and the relationships between risks, timing and effectiveness of interventions. The theoretical framework is then used to guide content analysis of 36 individual onsite heat illness cases to identify prominent risks. The results suggest that heat stress risks on construction site are socially constructed and can be effectively managed through elimination at supply chain level, effective engineering control, proactive control of the risks through individual interventions and reactive control through mindful recognition and response to early symptoms. The role of management infrastructure as a base for effective interventions is discussed. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Developing and sustaining human resources in the health supply chain in Ethiopia: barriers and enablers.

PubMed

Kälvemark Sporrong, Sofia; Traulsen, Janine M; Damene Kabtimer, Woynabeba; Mekasha Habtegiorgis, Bitsatab; Teshome Gebregeorgise, Dawit; Essah, Nana Am; Khan, Sara A; Brown, Andrew N

2016-01-01

The health supply chain is often the weakest link in achieving the health-related Millennium Development Goals and universal health coverage, requiring trained professionals who are often unavailable. In Ethiopia there have been recent developments in the area of health supply chain management. The aim of this study was to explore the current status of the development of human resources in health supply chain management in Ethiopia and to identify important factors affecting this development. A series of face-to-face interviews with key stakeholders was carried out in 2014. The interviews were conducted using a semi-structured interview guide. The interview guide comprised 51 questions. A qualitative analysis of transcripts was made. A total of 25 interviews were conducted. Three themes were identified: General changes: recognition, commitment and resources, Education and training, and Barriers and enablers. Results confirm the development of human resources in health supply chain management in many areas. However, several problems were identified including lack of coordination, partly due to the large number of stakeholders; reported high staff mobility; and a lack of overall strategy regarding the job/career structures necessary for maintaining human resources. Rural areas have a particular set of problems, including in transportation of goods and personnel, attracting and keeping personnel, and in communication and access to information. Ethiopia is on the way to developing a nationwide viable system for health supply chain management. However, there are still challenges. Short-term challenges include the importance of highlighting strategies and programs for human resources in health supply chain management. In the long term, commitments to financial support must be obtained. A strategy is needed for the further development and sustainability of human resources in the health supply chain in Ethiopia.

Reference frameworks for the health management of measles, breast cancer and diabetes (type II).

PubMed

Brand, Helmut; Schröder, Peter; Davies, John K; Escamilla, Ixhel; Hall, Caroline; Hickey, Kieran; Jelastopulu, Eleni; Mechtler, Reli; Yared, Wendy Tse; Volf, Jaroslav; Weihrauch, Birgit

2006-03-01

This paper presents reference frameworks which order effective and feasible policies and interventions for the health management of measles, breast cancer and diabetes (type II). These reference frameworks can be used to rapidly appraise regional health policy documents and existing health management systems. Furthermore, the reference frameworks can serve health policy makers for the planning of health management measures.

50 CFR 648.110 - Summer flounder framework adjustments to management measures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... UNITED STATES Management Measures for the Summer Flounder Fisheries § 648.110 Summer flounder framework... instead of a framework adjustment. (2) MAFMC recommendation. After developing management actions and... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Summer flounder framework adjustments to...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, Tzu-Ling; Yang, Chen-I., E-mail: ciyang@thu.edu.tw

The preparations and properties of three new homochiral three-dimensional (3D) coordination polymers, [M(D-cam)(pyz)(H{sub 2}O){sub 2}]{sub n} (M=Co (1) and Ni (2); D-H{sub 2}cam=(+) D-camphoric acid; pyz=pyrazine) and [Mn{sub 2}(D-cam){sub 2}(H{sub 2}O){sub 2}] (3), under solvothermal conditions is described. Single-crystal X-ray diffraction analyses revealed that all of compounds are homochiral 3D structure. 1 and 2 are isostructural and crystallize in the trigonal space group P3{sub 2}21, while 3 crystallizes in monoclinic space group P2{sub 1}. The structure of 1 and 2 consists of metal-D-cam helical chains which are pillared with pyrazine ligands into a 3D framework structure and 3 features amore » 3D homochiral framework involving one-dimensional manganese-carboxylate chains that are aligned parallel to the b axis. Magnetic susceptibility data of all compounds were collected. The findings indicate that μ{sub 2}-pyrazine dominate weak antiferromagnetic coupling within 1 and 2, while 3 exhibits antiferromagnetic behavior through the carboxylate groups of D-cam ligand. -- Graphical abstract: The preparations and properties of three new homochiral three-dimensional (3D) coordination polymers, [M(D-cam)(pyz)(H{sub 2}O){sub 2}]{sub n} (M=Co (1) and Ni (2); D-H{sub 2}cam=(+) D-camphoric acid; pyz=pyrazine) and [Mn{sub 2}(D-cam){sub 2}(H{sub 2}O){sub 2}] (3), under solvothermal conditions is described. Single-crystal X-ray diffraction analyses revealed that all of compounds are homochiral 3D structure. 1 and 2 are isostructural and crystallize in the trigonal space group P3{sub 2}21, while 3 crystallizes in monoclinic space group P2{sub 1}. The structure of 1 and 2 consists of metal-D-cam helical chains which are pillared with pyrazine ligands into a 3D framework structure and 3 features a 3D homochiral framework involving one-dimensional manganese-carboxylate chains that are aligned parallel to the b axis. Magnetic susceptibility data of all compounds were collected. The findings indicate that μ{sub 2}-pyrazine dominate weak antiferromagnetic coupling within 1 and 2, while 3 exhibits antiferromagnetic behavior through the carboxylate groups of D-cam ligand. Highlights: • Three homochiral 3D coordination polymers were synthesized. • 1 and 2 are 3D structure with metal-D-cam helical chains pillared by pyrazine. • 3 shows a 3D homochiral framework involving 1D manganese-carboxylate chains. • Magnetic data analysis indicates that 1–3 exhibit weak antiferromagnetic coupling.« less

SUPPLY CHAIN OPTIMIZATION FOR SUSTAINABILITY AND PROFITABILITY BY THE P-GRAPH FRAMEWORK

EPA Science Inventory

The proposed methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the U.S. EPA and the research group led by the founders of the P graph framework. U.S. EPA/ORD has substantial creditable experience with the development of indicat...

Study of Sharing Knowledge Resources in Business Schools

ERIC Educational Resources Information Center

Ranjan, Jayanthi

2011-01-01

Purpose: The purpose of this paper is to propose a common business school framework based on knowledge resources that are available in business schools. To support the arguments made based on review literature, the paper presents the holistic framework of knowledge resources in a business school and also provides a knowledge value chain in sharing…

Controlling Methane Emissions in the Natural Gas Sector. A Review of Federal and State Regulatory Frameworks Governing Production, Gathering, Processing, Transmission, and Distribution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paranhos, Elizabeth; Kozak, Tracy G.; Boyd, William

This report provides an overview of the regulatory frameworks governing natural gas supply chain infrastructure siting, construction, operation, and maintenance. Information was drawn from a number of sources, including published analyses, government reports, in addition to relevant statutes, court decisions and regulatory language, as needed. The scope includes all onshore facilities that contribute to methane emissions from the natural gas sector, focusing on three areas of state and federal regulations: (1) natural gas pipeline infrastructure siting and transportation service (including gathering, transmission, and distribution pipelines), (2) natural gas pipeline safety, and (3) air emissions associated with the natural gas supplymore » chain. In addition, the report identifies the incentives under current regulatory frameworks to invest in measures to reduce leakage, as well as the barriers facing investment in infrastructure improvement to reduce leakage. Policy recommendations regarding how federal or state authorities could regulate methane emissions are not provided; rather, existing frameworks are identified and some of the options for modifying existing regulations or adopting new regulations to reduce methane leakage are discussed.« less

Planning the bioterrorism response supply chain: learn and live.

PubMed

Brandeau, Margaret L; Hutton, David W; Owens, Douglas K; Bravata, Dena M

2007-01-01

Responses to bioterrorism require rapid procurement and distribution of medical and pharmaceutical supplies, trained personnel, and information. Thus, they present significant logistical challenges. On the basis of a review of the manufacturing and service supply chain literature, the authors identified five supply chain strategies that can potentially increase the speed of response to a bioterrorism attack, reduce inventories, and save money: effective supply chain network design; effective inventory management; postponement of product customization and modularization of component parts; coordination of supply chain stakeholders and appropriate use of incentives; and effective information management. The authors describe how concepts learned from published evaluations of manufacturing and service supply chains, as well as lessons learned from responses to natural disasters, naturally occurring outbreaks, and the 2001 US anthrax attacks, can be applied to design, evaluate, and improve the bioterrorism response supply chain. Such lessons could also be applied to the response supply chains for disease outbreaks and natural and manmade disasters.

Essential tools of supply chain management.

PubMed

Buddress, L; Raedels, A

2000-08-01

At a recent conference, the keynote speaker provoked an incredulous response when he said, "Today, competition among individual firms is dead." He then went on to explain that today, competition is supply chain against supply chain. Whichever firm has the superior supply chain will win out in the marketplace. Given the global marketplace in which we all operate, most of us would agree that his statements are true. How does a firm establish a world-class supply base? What kinds of contracts and agreements are necessary to support the diverse requirements of today's firms? How should a firm select from among the available contract types? These are foundation questions for supply chain management.

Towards a Cloud Based Smart Traffic Management Framework

NASA Astrophysics Data System (ADS)

Rahimi, M. M.; Hakimpour, F.

2017-09-01

Traffic big data has brought many opportunities for traffic management applications. However several challenges like heterogeneity, storage, management, processing and analysis of traffic big data may hinder their efficient and real-time applications. All these challenges call for well-adapted distributed framework for smart traffic management that can efficiently handle big traffic data integration, indexing, query processing, mining and analysis. In this paper, we present a novel, distributed, scalable and efficient framework for traffic management applications. The proposed cloud computing based framework can answer technical challenges for efficient and real-time storage, management, process and analyse of traffic big data. For evaluation of the framework, we have used OpenStreetMap (OSM) real trajectories and road network on a distributed environment. Our evaluation results indicate that speed of data importing to this framework exceeds 8000 records per second when the size of datasets is near to 5 million. We also evaluate performance of data retrieval in our proposed framework. The data retrieval speed exceeds 15000 records per second when the size of datasets is near to 5 million. We have also evaluated scalability and performance of our proposed framework using parallelisation of a critical pre-analysis in transportation applications. The results show that proposed framework achieves considerable performance and efficiency in traffic management applications.

Developing Students' Understanding of Co-Opetition and Multilevel Inventory Management Strategies in Supply Chains: An In-Class Spreadsheet Simulation Exercise

ERIC Educational Resources Information Center

Fetter, Gary; Shockley, Jeff

2014-01-01

Instructors look for ways to explain to students how supply chains can be constructed so that competing suppliers can work together to improve inventory management performance (i.e., a phenomenon known as co-opetition). An Excel spreadsheet-driven simulation is presented that models a complete multilevel supply chain system--customer, retailer,…

A strategic decision-making model considering the social costs of carbon dioxide emissions for sustainable supply chain management.

PubMed

Tseng, Shih-Chang; Hung, Shiu-Wan

2014-01-15

Incorporating sustainability into supply chain management has become a critical issue driven by pressures from governments, customers, and various stakeholder groups over the past decade. This study proposes a strategic decision-making model considering both the operational costs and social costs caused by the carbon dioxide emissions from operating such a supply chain network for sustainable supply chain management. This model was used to evaluate carbon dioxide emissions and operational costs under different scenarios in an apparel manufacturing supply chain network. The results showed that the higher the social cost rate of carbon dioxide emissions, the lower the amount of the emission of carbon dioxide. The results also suggested that a legislation that forces the enterprises to bear the social costs of carbon dioxide emissions resulting from their economic activities is an effective approach to reducing carbon dioxide emissions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Silo Effect a Prominence Factor to Decrease Efficiency of Pharmaceutical Industry

PubMed Central

Vatanpour, Hossein; Khorramnia, Atoosa; Forutan, Naghmeh

2013-01-01

To be sure, all the industries try to be involved in globalization with a constant trend to find out ways to increase productivity across different functions within an organization to maintain competitive advantage world. Pharmaceutical industries are not exceptional and further are based on fragmentation. So these kind of companies need to cope with several barriers such as silo mentality that may affect efficiency of their business activity. Due to eliminate a part of resources such as raw materials, new molecule developed, financial and human resources and so on, companies can gradually loss their competitive potentials in the market and increase their expenses. Furthermore, to avoid any business disturbances in financially connected companies due to silo effect, they should arrange their management to integrated organization form. Otherwise, actions taken by one business member of the chain can influence the profitability of all the other members in the chain. That is why recently supply chain has generated much interest in many business units. In this paper, it has been tried to investigate the different aspects of silo effect which can affect integrate supply chain. Finally, a fluent communication, high level of information exchange, fragmentation management, cross-functional control in a supply chain management format are needed to reduce or control silo effect within entire chain of the holding company by Supply chain management. PMID:24250690

Silo effect a prominence factor to decrease efficiency of pharmaceutical industry.

PubMed

Vatanpour, Hossein; Khorramnia, Atoosa; Forutan, Naghmeh

2013-01-01

To be sure, all the industries try to be involved in globalization with a constant trend to find out ways to increase productivity across different functions within an organization to maintain competitive advantage world. Pharmaceutical industries are not exceptional and further are based on fragmentation. So these kind of companies need to cope with several barriers such as silo mentality that may affect efficiency of their business activity. Due to eliminate a part of resources such as raw materials, new molecule developed, financial and human resources and so on, companies can gradually loss their competitive potentials in the market and increase their expenses. Furthermore, to avoid any business disturbances in financially connected companies due to silo effect, they should arrange their management to integrated organization form. Otherwise, actions taken by one business member of the chain can influence the profitability of all the other members in the chain. That is why recently supply chain has generated much interest in many business units. In this paper, it has been tried to investigate the different aspects of silo effect which can affect integrate supply chain. Finally, a fluent communication, high level of information exchange, fragmentation management, cross-functional control in a supply chain management format are needed to reduce or control silo effect within entire chain of the holding company by Supply chain management.

50 CFR 648.24 - Framework adjustments to management measures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Framework adjustments to management measures. 648.24 Section 648.24 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Management Measures for the Atlantic Mackerel, Squid, and Butterfish Fisheries § 648.24 Framework adjustments...

50 CFR 648.167 - Bluefish framework adjustment to management measures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... UNITED STATES Management Measures for the Atlantic Bluefish Fishery § 648.167 Bluefish framework... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Bluefish framework adjustment to management measures. 648.167 Section 648.167 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.167 - Bluefish framework adjustment to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... UNITED STATES Management Measures for the Atlantic Bluefish Fishery § 648.167 Bluefish framework... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Bluefish framework adjustment to management measures. 648.167 Section 648.167 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.167 - Bluefish framework adjustment to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... UNITED STATES Management Measures for the Atlantic Bluefish Fishery § 648.167 Bluefish framework... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Bluefish framework adjustment to management measures. 648.167 Section 648.167 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.25 - Atlantic Mackerel, squid, and butterfish framework adjustments to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... framework adjustments to management measures. 648.25 Section 648.25 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES... Butterfish Fisheries § 648.25 Atlantic Mackerel, squid, and butterfish framework adjustments to management...

50 CFR 648.25 - Atlantic Mackerel, squid, and butterfish framework adjustments to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... framework adjustments to management measures. 648.25 Section 648.25 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES... Butterfish Fisheries § 648.25 Atlantic Mackerel, squid, and butterfish framework adjustments to management...

50 CFR 648.25 - Atlantic Mackerel, squid, and butterfish framework adjustments to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... framework adjustments to management measures. 648.25 Section 648.25 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES... Butterfish Fisheries § 648.25 Atlantic Mackerel, squid, and butterfish framework adjustments to management...

50 CFR 648.167 - Bluefish framework adjustment to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... UNITED STATES Management Measures for the Atlantic Bluefish Fishery § 648.167 Bluefish framework... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Bluefish framework adjustment to management measures. 648.167 Section 648.167 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

On the Supply Chain Management Supported by E-Commerce Service Platform for Agreement based Circulation of Fruits and Vegetables

NASA Astrophysics Data System (ADS)

Bao, Liwei; Huang, Yuchi; Ma, Zengjun; Zhang, Jie; Lv, Qingchu

According to analysis of the supply chain process of agricultural products, the IT application requirements of the market entities participating in the agreement based circulation of fruits and vegetables have been discussed. The strategy of supply chain management basing on E-commerce service platform for fruits and vegetables has been proposed in this paper. The architecture and function composing of the service platform have been designed and implemented. The platform is constructed on a set of application service modules User can choose some of the application service modules and define them according to the business process. The application service modules chosen and defined by user are integrated as an application service package and applied as management information system of business process. With the E-commerce service platform, the supply chain management for agreement based circulation of agricultural products of vegetables and fruits can be implemented.

Supply chain management for small business--how to avoid being part of the food chain.

PubMed

Knechtges, J P; Watts, C A

2000-08-01

A supply chain is a series of customer and supplier relationships that extend throughout and beyond the company. It is an interwoven set of links that together form a chain supplying our customers in a seamless and integrated fashion delivering a high level of customer satisfaction. Supply chain management (SCM) integrates all activities so they are focused on customer satisfaction (both internally and externally). One of the things this article will attempt to accomplish is to provide a clear understanding of SCM's positive impact on customer service as well as on improving profitability, cash flow, product cycle times, and communication. Whether we go forward in the supply chain to the final end-user or backward in the supply chain to our supplier's suppliers, SCM will significantly improve our ability to serve our customers.

Lignocellulosic crop supply chains (eg, Miscanthus, switchgrass, reed canary grass, rye, giant reed, etc.) Chapter 12 of "Biomass Supply Chains for Bioenergy and Biorefining"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roni, Mohammad S.; Cafferty, Kara G.; Hess, J. Richard

This chapter provides an overview of lignocellulosic crop supply chains such as Miscanthus, switch grass, reed canary grass, rye, and giant reed by outlining typical logistic operations in support of a liquid biofuel market. We present two strategies for managing feedstocks within the biomass supply system: (1) the conventional bale feedstock supply system and (2) the advanced supply system concept. Finally, we discuss feedstock blending and integrated landscape management as innovative improvements to the lignocellulosic crop supply chain.

Data provenance assurance in the cloud using blockchain

NASA Astrophysics Data System (ADS)

Shetty, Sachin; Red, Val; Kamhoua, Charles; Kwiat, Kevin; Njilla, Laurent

2017-05-01

Ever increasing adoption of cloud technology scales up the activities like creation, exchange, and alteration of cloud data objects, which create challenges to track malicious activities and security violations. Addressing this issue requires implementation of data provenance framework so that each data object in the federated cloud environment can be tracked and recorded but cannot be modified. The blockchain technology gives a promising decentralized platform to build tamper-proof systems. Its incorruptible distributed ledger/blockchain complements the need of maintaining cloud data provenance. In this paper, we present a cloud based data provenance framework using block chain which traces data record operations and generates provenance data. We anchor provenance data records into block chain transactions, which provide validation on provenance data and preserve user privacy at the same time. Once the provenance data is uploaded to the global block chain network, it is extremely challenging to tamper the provenance data. Besides, the provenance data uses hashed user identifiers prior to uploading so the blockchain nodes cannot link the operations to a particular user. The framework ensures that the privacy is preserved. We implemented the architecture on ownCloud, uploaded records to blockchain network, stored records in a provenance database and developed a prototype in form of a web service.

Two new frameworks of potassium saccharate obtained from acidic and alkaline solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lv, Yao-Kang; Feng, Yun-Long, E-mail: sky37@zjnu.edu.c; Liu, Ji-Wei

2011-05-15

Two chiral K(I) complexes based on D-saccharic acid (H{sub 2}sac), [K(Hsac)]{sub n} (1) and [K{sub 2}(sac)]{sub n} (2) were obtained from acidic and alkaline solution. The 3D framework of 1 includes K(I) polyhedral rods and typical pairwise coaxial right- and left-handed helical chains, and displays binodal 6-connected pcu topology. 2 contains 2D polyhedral sheets consisting of left-handed helical chains, and generates 3D network with an unprecedented (7,11)-connected net. Cyclic voltammetry tests and charge-discharge tests indicate that the addition of complex 2 to the electrolyte could improve the electrochemical properties of the nickel hydroxide electrode. -- Graphical abstract: Two K(I) complexesmore » based on D-saccharic acid (H{sub 2}sac), [K(Hsac)]{sub n} (1) and [K{sub 2}(sac)]{sub n} (2) were obtained and characterized. Electrochemical studies indicate the potential use of 2 in Ni-MH battery. Display Omitted highlights: > Two novel chiral K(I) frameworks based on D-saccharic acid were obtained. > The structure of 1 includes K(I) polyhedral rods and typical helical chains. > 2 contains 2D polyhedral sheets and generates an unprecedented (7,11)-connected net. > Addition of 2 to electrolyte could improve the nickel hydroxide electrode's property.« less

SOS: A Time Management Framework.

ERIC Educational Resources Information Center

Rees, Ruth

This paper proposes a framework for the management of time, under the rubric of "SOS" (Self-Organization-Scheduling), designed specifically for school officials. Underlying this framework is a belief that, in order to manage time, one must manage oneself within the bounds of the institution. Accordingly, three interdependent sets of practical…

50 CFR 648.239 - Spiny dogfish framework adjustments to management measures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... UNITED STATES Management Measures for the Spiny Dogfish Fishery § 648.239 Spiny dogfish framework... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Spiny dogfish framework adjustments to management measures. 648.239 Section 648.239 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.110 - Summer flounder framework adjustments to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... UNITED STATES Management Measures for the Summer Flounder Fisheries § 648.110 Summer flounder framework... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Summer flounder framework adjustments to management measures. 648.110 Section 648.110 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.239 - Spiny dogfish framework adjustments to management measures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... UNITED STATES Management Measures for the Spiny Dogfish Fishery § 648.239 Spiny dogfish framework... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Spiny dogfish framework adjustments to management measures. 648.239 Section 648.239 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.110 - Summer flounder framework adjustments to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... UNITED STATES Management Measures for the Summer Flounder Fisheries § 648.110 Summer flounder framework... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Summer flounder framework adjustments to management measures. 648.110 Section 648.110 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.239 - Spiny dogfish framework adjustments to management measures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... UNITED STATES Management Measures for the Spiny Dogfish Fishery § 648.239 Spiny dogfish framework... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Spiny dogfish framework adjustments to management measures. 648.239 Section 648.239 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.79 - Surfclam and ocean quahog framework adjustments to management measures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Surfclam and ocean quahog framework adjustments to management measures. (a) Within season management action... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Surfclam and ocean quahog framework adjustments to management measures. 648.79 Section 648.79 Wildlife and Fisheries FISHERY CONSERVATION AND...

50 CFR 648.110 - Summer flounder framework adjustments to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... UNITED STATES Management Measures for the Summer Flounder Fisheries § 648.110 Summer flounder framework... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Summer flounder framework adjustments to management measures. 648.110 Section 648.110 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

50 CFR 648.239 - Spiny dogfish framework adjustments to management measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... UNITED STATES Management Measures for the Spiny Dogfish Fishery § 648.239 Spiny dogfish framework... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Spiny dogfish framework adjustments to management measures. 648.239 Section 648.239 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT...

Adopting the sensemaking perspective for chronic disease self-management.

PubMed

Mamykina, Lena; Smaldone, Arlene M; Bakken, Suzanne R

2015-08-01

Self-monitoring is an integral component of many chronic diseases; however few theoretical frameworks address how individuals understand self-monitoring data and use it to guide self-management. To articulate a theoretical framework of sensemaking in diabetes self-management that integrates existing scholarship with empirical data. The proposed framework is grounded in theories of sensemaking adopted from organizational behavior, education, and human-computer interaction. To empirically validate the framework the researchers reviewed and analyzed reports on qualitative studies of diabetes self-management practices published in peer-reviewed journals from 2000 to 2015. The proposed framework distinguishes between sensemaking and habitual modes of self-management and identifies three essential sensemaking activities: perception of new information related to health and wellness, development of inferences that inform selection of actions, and carrying out daily activities in response to new information. The analysis of qualitative findings from 50 published reports provided ample empirical evidence for the proposed framework; however, it also identified a number of barriers to engaging in sensemaking in diabetes self-management. The proposed framework suggests new directions for research in diabetes self-management and for design of new informatics interventions for data-driven self-management. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

A new 3D nickel(II) framework composed of large rings: Ionothermal synthesis and crystal structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu Ling; Choi, Eun-Young; Kwon, Young-Uk

2008-11-15

Ionothermal reaction between Ni{sup 2+} and 1,3,5-benzentricarboxylic acid (H{sub 3}BTC) with [AMI]Cl (AMI=1-amyl-3-methylimidazolium) as the reaction medium produced a novel 3D mixed-ligand metal-organic framework [AMI][Ni{sub 3}(BTC){sub 2}(OAc)(MI){sub 3}] (1) (MI=1-methylimidazole) with [AMI]{sup +} incorporated in the framework. The framework is formed by connecting 2D planes, made up of 32- and 48-membered rings, through 1D chains composed of 32-membered rings. The two BTC{sup 3-} ligands in 1 show the same connectivity mode with two bidentate and one {mu}{sub 2} bridging carboxylic groups. This is a new connectivity mode to the already existing 17 in the Ni-BTC system. The role of MImore » and [AMI]Cl in the structure formation is discussed. - Graphical Abstract: A novel 3D framework [AMI][Ni{sub 3}(BTC){sub 2}(OAc)(MI){sub 3}] is obtained in ionothermal system with [AMI]{sup +} incorporating in the cavities as structure directing template and BTC{sup 3-} showing a new coordination fashion. The 3D framework is constructed by 2D layers linked with 1D double chains. The title compound has the middle thermal stability at ca. 280 deg. C.« less

Hydrology-oriented forest management trade-offs. A modeling framework coupling field data, simulation results and Bayesian Networks.

PubMed

Garcia-Prats, Alberto; González-Sanchis, María; Del Campo, Antonio D; Lull, Cristina

2018-10-15

Hydrology-oriented forest management sets water as key factor of the forest management for adaptation due to water is the most limiting factor in the Mediterranean forest ecosystems. The aim of this study was to apply Bayesian Network modeling to assess potential indirect effects and trade-offs when hydrology-oriented forest management is applied to a real Mediterranean forest ecosystem. Water, carbon and nitrogen cycles, and forest fire risk were included in the modeling framework. Field data from experimental plots were employed to calibrate and validate the mechanistic Biome-BGCMuSo model that simulates the storage and flux of water, carbon, and nitrogen between the ecosystem and the atmosphere. Many other 50-year long scenarios with different conditions to the ones measured in the field experiment were simulated and the outcomes employed to build the Bayesian Network in a linked chain of models. Hydrology-oriented forest management was very positive insofar as more water was made available to the stand because of an interception reduction. This resource was made available to the stand, which increased the evapotranspiration and its components, the soil water content and a slightly increase of deep percolation. Conversely, Stemflow was drastically reduced. No effect was observed on Runof due to the thinning treatment. The soil organic carbon content was also increased which in turn caused a greater respiration. The long-term effect of the thinning treatment on the LAI was very positive. This was undoubtedly due to the increased vigor generated by the greater availability of water and nutrients for the stand and the reduction of competence between trees. This greater activity resulted in an increase in GPP and vegetation carbon, and therefore, we would expect a higher carbon sequestration. It is worth emphasizing that this extra amount of water and nutrients was taken up by the stand and did not entail any loss of nutrients. Copyright © 2018 Elsevier B.V. All rights reserved.

Analyzing the impact of carbon regulatory mechanisms on supply chain management.

DOT National Transportation Integrated Search

2014-07-01

The objective of this research is developing a toolset for designing and managing cost : efficient and environmentally friendly supply chains for perishable products. : The models we propose minimize transportation and inventory holding costs in the ...

A Markov Random Field Framework for Protein Side-Chain Resonance Assignment

NASA Astrophysics Data System (ADS)

Zeng, Jianyang; Zhou, Pei; Donald, Bruce Randall

Nuclear magnetic resonance (NMR) spectroscopy plays a critical role in structural genomics, and serves as a primary tool for determining protein structures, dynamics and interactions in physiologically-relevant solution conditions. The current speed of protein structure determination via NMR is limited by the lengthy time required in resonance assignment, which maps spectral peaks to specific atoms and residues in the primary sequence. Although numerous algorithms have been developed to address the backbone resonance assignment problem [68,2,10,37,14,64,1,31,60], little work has been done to automate side-chain resonance assignment [43, 48, 5]. Most previous attempts in assigning side-chain resonances depend on a set of NMR experiments that record through-bond interactions with side-chain protons for each residue. Unfortunately, these NMR experiments have low sensitivity and limited performance on large proteins, which makes it difficult to obtain enough side-chain resonance assignments. On the other hand, it is essential to obtain almost all of the side-chain resonance assignments as a prerequisite for high-resolution structure determination. To overcome this deficiency, we present a novel side-chain resonance assignment algorithm based on alternative NMR experiments measuring through-space interactions between protons in the protein, which also provide crucial distance restraints and are normally required in high-resolution structure determination. We cast the side-chain resonance assignment problem into a Markov Random Field (MRF) framework, and extend and apply combinatorial protein design algorithms to compute the optimal solution that best interprets the NMR data. Our MRF framework captures the contact map information of the protein derived from NMR spectra, and exploits the structural information available from the backbone conformations determined by orientational restraints and a set of discretized side-chain conformations (i.e., rotamers). A Hausdorff-based computation is employed in the scoring function to evaluate the probability of side-chain resonance assignments to generate the observed NMR spectra. The complexity of the assignment problem is first reduced by using a dead-end elimination (DEE) algorithm, which prunes side-chain resonance assignments that are provably not part of the optimal solution. Then an A* search algorithm is used to find a set of optimal side-chain resonance assignments that best fit the NMR data. We have tested our algorithm on NMR data for five proteins, including the FF Domain 2 of human transcription elongation factor CA150 (FF2), the B1 domain of Protein G (GB1), human ubiquitin, the ubiquitin-binding zinc finger domain of the human Y-family DNA polymerase Eta (pol η UBZ), and the human Set2-Rpb1 interacting domain (hSRI). Our algorithm assigns resonances for more than 90% of the protons in the proteins, and achieves about 80% correct side-chain resonance assignments. The final structures computed using distance restraints resulting from the set of assigned side-chain resonances have backbone RMSD 0.5 - 1.4 Å and all-heavy-atom RMSD 1.0 - 2.2 Å from the reference structures that were determined by X-ray crystallography or traditional NMR approaches. These results demonstrate that our algorithm can be successfully applied to automate side-chain resonance assignment and high-quality protein structure determination. Since our algorithm does not require any specific NMR experiments for measuring the through-bond interactions with side-chain protons, it can save a significant amount of both experimental cost and spectrometer time, and hence accelerate the NMR structure determination process.

New LaMAsH(x) (M = Co, Ni, or Cu) arsenides with covalent M-H chains.

PubMed

Mizoguchi, Hiroshi; Park, SangWon; Hiraka, Haruhiro; Ikeda, Kazutaka; Otomo, Toshiya; Hosono, Hideo

2014-12-17

A new series of tetragonal LaPtSi-type mixed-anion arsenides, LaMAsH(x) (M = Co, Ni, or Cu), has been synthesized using high-temperature and high-pressure techniques. The crystal structure of these intermetallic compounds determined via powder neutron diffraction is composed of a 3D framework of three connected planes with the La ions filling the cavities in the structure. Each late transition-metal ion M, all of which have relatively large electronegativities, behaves like a main group element and forms a planar coordination configuration with three As ions. The trigonal-bipyramidal coordination adopted by the H in the cavity, HM2La3, is compressed along the C3 axis, and unusual M-H chains run along the x and y directions, reinforcing the covalent framework. These chains, which are unique in solids, are stabilized by covalent interactions between the M 4s and H 1s orbitals.

Modelling electro-active polymers with a dispersion-type anisotropy

NASA Astrophysics Data System (ADS)

Hossain, Mokarram; Steinmann, Paul

2018-02-01

We propose a novel constitutive framework for electro-active polymers (EAPs) that can take into account anisotropy with a chain dispersion. To enhance actuation behaviour, particle-filled EAPs become promising candidates nowadays. Recent studies suggest that particle-filled EAPs, which can be cured under an electric field during the manufacturing time, do not necessarily form perfect anisotropic composites, rather they create composites with dispersed chains. Hence in this contribution, an electro-mechanically coupled constitutive model is devised that considers the chain dispersion with a probability distribution function in an integral form. To obtain relevant quantities in discrete form, numerical integration over the unit sphere is utilized. Necessary constitutive equations are derived exploiting the basic laws of thermodynamics that result in a thermodynamically consistent formulation. To demonstrate the performance of the proposed electro-mechanically coupled framework, we analytically solve a non-homogeneous boundary value problem, the extension and inflation of an axisymmetric cylindrical tube under electro-mechanically coupled load. The results capture various electro-mechanical couplings with the formulation proposed for EAP composites.

Integrating a Discovery-Based Laboratory to Teach Supply Chain Management Fundamentals in an Undergraduate Management Course

ERIC Educational Resources Information Center

Zeng, Amy; Johnson, Sharon

2009-01-01

Using experiential simulation games is a commonly used pedagogical method to enrich classroom discussions and to facilitate students' learning in supply chain management education at both undergraduate and graduate levels. However, existing games are inappropriate for undergraduate students that are first-time learners of the subject. In this…

Essays on the Effect of Radio Frequency Identification (RFID) on the Management of Healthcare Supply Chain Performance

ERIC Educational Resources Information Center

Cakici, Ozden Engin

2012-01-01

This dissertation examines three issues on the effect of Radio Frequency Identification (RFID) on the management of healthcare supply chain performance within the context of inventory management. Motivated by a case study conducted in a radiology practice, the second chapter analyzes the incremental benefits of RFID over barcodes for managing…

Antiretroviral procurement and supply chain management.

PubMed

Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

2014-01-01

Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

Sense and Respond Logistics: Integrating Prediction, Responsiveness, and Control Capabilities

DTIC Science & Technology

2006-01-01

logistics SAR sense and respond SCM Supply Chain Management SCN Supply Chain Network SIDA sense, interpret, decide, act SOS source of supply TCN...commodity supply chain management ( SCM ), will have WS- SCMs that focus on integrating information for a particular MDS. 8 In the remainder of this...developed applications of ABMs for SCM .21 Applications of Agents and Agent-Based Modeling Agents have been used in telecommunications, e-commerce

Risk assessment in the upstream crude oil supply chain: Leveraging analytic hierarchy process

NASA Astrophysics Data System (ADS)

Briggs, Charles Awoala

For an organization to be successful, an effective strategy is required, and if implemented appropriately the strategy will result in a sustainable competitive advantage. The importance of decision making in the oil industry is reflected in the magnitude and nature of the industry. Specific features of the oil industry supply chain, such as its longer chain, the complexity of its transportation system, its complex production and storage processes, etc., pose challenges to its effective management. Hence, understanding the risks, the risk sources, and their potential impacts on the oil industry's operations will be helpful in proposing a risk management model for the upstream oil supply chain. The risk-based model in this research uses a three-level analytic hierarchy process (AHP), a multiple-attribute decision-making technique, to underline the importance of risk analysis and risk management in the upstream crude oil supply chain. Level 1 represents the overall goal of risk management; Level 2 is comprised of the various risk factors; and Level 3 represents the alternative criteria of the decision maker as indicated on the hierarchical structure of the crude oil supply chain. Several risk management experts from different oil companies around the world were surveyed, and six major types of supply chain risks were identified: (1) exploration and production, (2) environmental and regulatory compliance, (3) transportation, (4) availability of oil, (5) geopolitical, and (6) reputational. Also identified are the preferred methods of managing risks which include; (1) accept and control the risks, (2) avoid the risk by stopping the activity, or (3) transfer or share the risks to other companies or insurers. The results from the survey indicate that the most important risk to manage is transportation risk with a priority of .263, followed by exploration/production with priority of .198, with an overall inconsistency of .03. With respect to major objectives the most preferred risk management policy option based on the result of the composite score is accept and control risk with a priority of .446, followed by transfer or share risk with a priority of .303. The least likely option is to terminate or forgo activity with a priority of .251.

Validation of a clinical leadership qualities framework for managers in aged care: a Delphi study.

PubMed

Jeon, Yun-Hee; Conway, Jane; Chenoweth, Lynn; Weise, Janelle; Thomas, Tamsin Ht; Williams, Anna

2015-04-01

To establish validity of a clinical leadership framework for aged care middle managers (The Aged care Clinical Leadership Qualities Framework). Middle managers in aged care have responsibility not only for organisational governance also and operational management but also quality service delivery. There is a need to better define clinical leadership abilities in aged care middle managers, in order to optimise their positional authority to lead others to achieve quality outcomes. A Delphi method. Sixty-nine experts in aged care were recruited, representing rural, remote and metropolitan community and residential aged care settings. Panellists were asked to rate the proposed framework in terms of the relevance and importance of each leadership quality using four-point Likert scales, and to provide comments. Three rounds of consultation were conducted. The number and corresponding percentage of the relevance and importance rating for each quality was calculated for each consultation round, as well as mean scores. Consensus was determined to be reached when a percentage score reached 70% or greater. Twenty-three panellists completed all three rounds of consultation. Following the three rounds of consultation, the acceptability and face validity of the framework was confirmed. The study confirmed the framework as useful in identifying leadership requirements for middle managers in Australian aged care settings. The framework is the first validated framework of clinical leadership attributes for middle managers in aged care and offers an initial step forward in clarifying the aged care middle manager role. The framework provides clarity in the breadth of role expectations for the middle managers and can be used to inform an aged care specific leadership program development, individuals' and organisations' performance and development processes; and policy and guidelines about the types of activities required of middle managers in aged care. © 2014 John Wiley & Sons Ltd.

Information technology and supply chain management: a study of the food industry.

PubMed

Hill, C A

2000-08-01

This paper's topic is the use of information technology (IT) for the development of supply chain management (SCM). In today's business environment, both in academics and industry, the term SCM has become a popular paradigm. In particular, the use of IT to facilitate the development of supply chain partners is gaining interest within industry. This paper develops the topic of SCM and further develops the relationship between the use of IT, in the form of electronic data interchange, and the development of supply chain integration. The goal of using SCM along with IT is to develop a supply chain that is capable of responding more quickly and efficiently in the meeting of consumer's requirements.

A multi-period distribution network design model under demand uncertainty

NASA Astrophysics Data System (ADS)

Tabrizi, Babak H.; Razmi, Jafar

2013-05-01

Supply chain management is taken into account as an inseparable component in satisfying customers' requirements. This paper deals with the distribution network design (DND) problem which is a critical issue in achieving supply chain accomplishments. A capable DND can guarantee the success of the entire network performance. However, there are many factors that can cause fluctuations in input data determining market treatment, with respect to short-term planning, on the one hand. On the other hand, network performance may be threatened by the changes that take place within practicing periods, with respect to long-term planning. Thus, in order to bring both kinds of changes under control, we considered a new multi-period, multi-commodity, multi-source DND problem in circumstances where the network encounters uncertain demands. The fuzzy logic is applied here as an efficient tool for controlling the potential customers' demand risk. The defuzzifying framework leads the practitioners and decision-makers to interact with the solution procedure continuously. The fuzzy model is then validated by a sensitivity analysis test, and a typical problem is solved in order to illustrate the implementation steps. Finally, the formulation is tested by some different-sized problems to show its total performance.

Drinking water quality management: a holistic approach.

PubMed

Rizak, S; Cunliffe, D; Sinclair, M; Vulcano, R; Howard, J; Hrudey, S; Callan, P

2003-01-01

A growing list of water contaminants has led to some water suppliers relying primarily on compliance monitoring as a mechanism for managing drinking water quality. While such monitoring is a necessary part of drinking water quality management, experiences with waterborne disease threats and outbreaks have shown that compliance monitoring for numerical limits is not, in itself, sufficient to guarantee the safety and quality of drinking water supplies. To address these issues, the Australian National Health and Medical Research Council (NHMRC) has developed a Framework for Management of Drinking Water Quality (the Framework) for incorporation in the Australian Drinking Water Guidelines, the primary reference on drinking water quality in Australia. The Framework was developed specifically for drinking water supplies and provides a comprehensive and preventive risk management approach from catchment to consumer. It includes holistic guidance on a range of issues considered good practice for system management. The Framework addresses four key areas: Commitment to Drinking Water Quality Management, System Analysis and System Management, Supporting Requirements, and Review. The Framework represents a significantly enhanced approach to the management and regulation of drinking water quality and offers a flexible and proactive means of optimising drinking water quality and protecting public health. Rather than the primary reliance on compliance monitoring, the Framework emphasises prevention, the importance of risk assessment, maintaining the integrity of water supply systems and application of multiple barriers to assure protection of public health. Development of the Framework was undertaken in collaboration with the water industry, regulators and other stakeholder, and will promote a common and unified approach to drinking water quality management throughout Australia. The Framework has attracted international interest.

A revised Self- and Family Management Framework.

PubMed

Grey, Margaret; Schulman-Green, Dena; Knafl, Kathleen; Reynolds, Nancy R

2015-01-01

Research on self- and family management of chronic conditions has advanced over the past 6 years, but the use of simple frameworks has hampered the understanding of the complexities involved. We sought to update our previously published model with new empirical, synthetic, and theoretical work. We used synthesis of previous studies to update the framework. We propose a revised framework that clarifies facilitators and barriers, processes, proximal outcomes, and distal outcomes of self- and family management and their relationships. We offer the revised framework as a model that can be used in studies aimed at advancing self- and family management science. The use of the framework to guide studies would allow for the design of studies that can address more clearly how self-management interventions work and under what conditions. Copyright © 2015 Elsevier Inc. All rights reserved.

The Protected Areas Visitor Impact Management (PAVIM) framework: A simplified process for making management decisions

USGS Publications Warehouse

Farrell, T.A.; Marion, J.L.

2002-01-01

Ecotourism and protected area visitation in Central and South America have resulted in ecological impacts, which some protected areas managers have addressed by employing visitor impact management frameworks. In this paper, we propose the Protected Area Visitor Impact Management (PAVIM) framework as an alternative to carrying capacity and other frameworks such as Limits of Acceptable Change. We use a set of evaluation criteria to compare the relative positive and negative attributes of carrying capacity, other decision-making frameworks and the new framework, within the context of their actual and potential use in Central and South America. Positive attributes of PAVIM include simplicity, flexibility, cost effectiveness, timeliness, and incorporating input from stakeholders and local residents. Negative attributes include diminished objectivity and cultural sensitivity issues. Further research and application of PAVIM are recommended.

A New Framework for Analysis of Coevolutionary Systems-Directed Graph Representation and Random Walks.

PubMed

Chong, Siang Yew; Tiňo, Peter; He, Jun; Yao, Xin

2017-11-20

Studying coevolutionary systems in the context of simplified models (i.e., games with pairwise interactions between coevolving solutions modeled as self plays) remains an open challenge since the rich underlying structures associated with pairwise-comparison-based fitness measures are often not taken fully into account. Although cyclic dynamics have been demonstrated in several contexts (such as intransitivity in coevolutionary problems), there is no complete characterization of cycle structures and their effects on coevolutionary search. We develop a new framework to address this issue. At the core of our approach is the directed graph (digraph) representation of coevolutionary problems that fully captures structures in the relations between candidate solutions. Coevolutionary processes are modeled as a specific type of Markov chains-random walks on digraphs. Using this framework, we show that coevolutionary problems admit a qualitative characterization: a coevolutionary problem is either solvable (there is a subset of solutions that dominates the remaining candidate solutions) or not. This has an implication on coevolutionary search. We further develop our framework that provides the means to construct quantitative tools for analysis of coevolutionary processes and demonstrate their applications through case studies. We show that coevolution of solvable problems corresponds to an absorbing Markov chain for which we can compute the expected hitting time of the absorbing class. Otherwise, coevolution will cycle indefinitely and the quantity of interest will be the limiting invariant distribution of the Markov chain. We also provide an index for characterizing complexity in coevolutionary problems and show how they can be generated in a controlled manner.

Climate Leadership Award for Supply Chain Leadership

EPA Pesticide Factsheets

Apply to the Climate Leadership Award for Supply Chain Leadership, which publicly recognizes organizations that are are at the leading edge of managing greenhouse gas emissions in their organizational supply chains.

77 FR 26103 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

...NMFS approves Framework Adjustment 47 (Framework 47) to the Northeast (NE) Multispecies Fishery Management Plan (FMP) and implements the approved measures. The New England Fishery Management Council (Council) developed and adopted Framework 47 based on the biennial review process established in the NE Multispecies FMP to develop annual catch limits (ACLs) and revise management measures necessary to rebuild overfished groundfish stocks and achieve the goals and objectives of the FMP. This action also implements management measures and revises existing regulations that are not included in Framework 47, including common pool management measures for fishing year (FY) 2012, modification of the Ruhle trawl definition, and clarification of the regulations for charter/party and recreational groundfish vessels fishing in groundfish closed areas. This action is intended to prevent overfishing, rebuild overfished stocks, achieve optimum yield, and ensure that management measures are based on the best available scientific information at the time Framework 47 was submitted.

RFID Application Strategy in Agri-Food Supply Chain Based on Safety and Benefit Analysis

NASA Astrophysics Data System (ADS)

Zhang, Min; Li, Peichong

Agri-food supply chain management (SCM), a management method to optimize internal costs and productivities, has evolved as an application of e-business technologies. These days, RFID has been widely used in many fields. In this paper, we analyze the characteristics of agri-food supply chain. Then the disadvantages of RFID are discussed. After that, we study the application strategies of RFID based on benefit and safety degree.

On adaptive modified projective synchronization of a supply chain management system

NASA Astrophysics Data System (ADS)

Tirandaz, Hamed

2017-12-01

In this paper, the synchronization problem of a chaotic supply chain management system is studied. A novel adaptive modified projective synchronization method is introduced to control the behaviour of the leader supply chain system by a follower chaotic system and to adjust the leader system parameters until the measurable errors of the system parameters converge to zero. The stability evaluation and convergence analysis are carried out by the Lyapanov stability theorem. The proposed synchronization and antisynchronization techniques are studied for identical supply chain chaotic systems. Finally, some numerical simulations are presented to verify the effectiveness of the theoretical discussions.

Critical success factors for mutual collaboration with suppliers in IT outsourcing industry: a case study of a top IT outsourcing company in Korea

NASA Astrophysics Data System (ADS)

Cha, Kyung-Jin; Kim, Yang Sok

2018-01-01

Nowadays, information technology (IT) outsourcing companies face enduring demands to reduce cost while increasing productivity. This pressure leads many IT outsourcing companies to rely on outsourcing arrangements with IT personnel suppliers. In order to maximise efficiency, outsourcing companies have focused on fostering high-performing suppliers through improved collaboration and mutual relations. However, it is very difficult to advance to a long-term partnership using the existing outsourcing process because of insufficient collaboration between IT outsourcing companies and their suppliers. Based on collaboration perspective of supply chain management (SCM), this study identifies the critical success factors for collaborative strategic partnerships and presents an evaluation framework for assessing and managing suppliers. We have developed an organisational process model for Supplier relationship management (SRM)-based collaboration which includes some of the key constructs from the previous studies and interviews with the IT outsourcing industry people. In this study, we will identify four types of strategic suppliers and suggest approaches for improving collaborative relationship between an IT outsourcing company and its partner companies. In addition, to validate the feasibility of the proposed model, we applied it to a well-known Korean IT outsourcing company 'A'.

HACCP-Based Programs for Preventing Disease and Injury from Premise Plumbing: A Building Consensus

PubMed Central

McCoy, William F.; Rosenblatt, Aaron A.

2015-01-01

Thousands of preventable injuries and deaths are annually caused by microbial, chemical and physical hazards from building water systems. Water is processed in buildings before use; this can degrade the quality of the water. Processing steps undertaken on-site in buildings often include conditioning, filtering, storing, heating, cooling, pressure regulation and distribution through fixtures that restrict flow and temperature. Therefore, prevention of disease and injury requires process management. A process management framework for buildings is the hazard analysis and critical control point (HACCP) adaptation of failure mode effects analysis (FMEA). It has been proven effective for building water system management. Validation is proof that hazards have been controlled under operating conditions and may include many kinds of evidence including cultures of building water samples to detect and enumerate potentially pathogenic microorganisms. However, results from culture tests are often inappropriately used because the accuracy and precision are not sufficient to support specifications for control limit or action triggers. A reliable negative screen is based on genus-level Polymerase Chain Reaction (PCR) for Legionella in building water systems; however, building water samples with positive results from this test require further analysis by culture methods. PMID:26184325

HACCP-Based Programs for Preventing Disease and Injury from Premise Plumbing: A Building Consensus.

PubMed

McCoy, William F; Rosenblatt, Aaron A

2015-07-09

Thousands of preventable injuries and deaths are annually caused by microbial, chemical and physical hazards from building water systems. Water is processed in buildings before use; this can degrade the quality of the water. Processing steps undertaken on-site in buildings often include conditioning, filtering, storing, heating, cooling, pressure regulation and distribution through fixtures that restrict flow and temperature. Therefore, prevention of disease and injury requires process management. A process management framework for buildings is the hazard analysis and critical control point (HACCP) adaptation of failure mode effects analysis (FMEA). It has been proven effective for building water system management. Validation is proof that hazards have been controlled under operating conditions and may include many kinds of evidence including cultures of building water samples to detect and enumerate potentially pathogenic microorganisms. However, results from culture tests are often inappropriately used because the accuracy and precision are not sufficient to support specifications for control limit or action triggers. A reliable negative screen is based on genus-level Polymerase Chain Reaction (PCR) for Legionella in building water systems; however, building water samples with positive results from this test require further analysis by culture methods.

75 FR 10210 - Market Development Cooperator Program 2010

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-05

...; 4. Help U.S. industry to capitalize on effective global supply chain management strategies; 5... in foreign markets by safeguarding non-U.S. elements of the supply chain with an ingredient testing... Management (OPCM), Manufacturing and Services (MAS), International Trade Administration (ITA), Commerce...

Modeling wildfire incident complexity dynamics.

PubMed

Thompson, Matthew P

2013-01-01

Wildfire management in the United States and elsewhere is challenged by substantial uncertainty regarding the location and timing of fire events, the socioeconomic and ecological consequences of these events, and the costs of suppression. Escalating U.S. Forest Service suppression expenditures is of particular concern at a time of fiscal austerity as swelling fire management budgets lead to decreases for non-fire programs, and as the likelihood of disruptive within-season borrowing potentially increases. Thus there is a strong interest in better understanding factors influencing suppression decisions and in turn their influence on suppression costs. As a step in that direction, this paper presents a probabilistic analysis of geographic and temporal variation in incident management team response to wildfires. The specific focus is incident complexity dynamics through time for fires managed by the U.S. Forest Service. The modeling framework is based on the recognition that large wildfire management entails recurrent decisions across time in response to changing conditions, which can be represented as a stochastic dynamic system. Daily incident complexity dynamics are modeled according to a first-order Markov chain, with containment represented as an absorbing state. A statistically significant difference in complexity dynamics between Forest Service Regions is demonstrated. Incident complexity probability transition matrices and expected times until containment are presented at national and regional levels. Results of this analysis can help improve understanding of geographic variation in incident management and associated cost structures, and can be incorporated into future analyses examining the economic efficiency of wildfire management.

The Influence of U.S. Chain Restaurant Food Consumption and Obesity in China and South Korea: An Ecological Perspective of Food Consumption, Self-Efficacy in Weight Management, Willingness to Communicate About Weight/Diet, and Depression.

PubMed

Wright, Kevin B; Mazzone, Raphael; Oh, Hyun; Du, Joshua; Smithson, Anne-Bennett; Ryan, Diane; MacNeil, David; Tong, Xing; Stiller, Carol

2016-11-01

This study examined the impact of U.S. chain restaurant food consumption in China and South Korea from an ecological perspective. Specifically, it explored the relationships among several environmental and individual variables that have been found to affect obesity/weight management in previous research, including the prevalence/popularity of U.S. chain restaurants in these countries, frequency of U.S. chain restaurant food consumption, self-efficacy in weight management, willingness to communicate about weight/diet, self-perceptions of weight/obesity stigma, body mass index (BMI), and depression. The results indicated that willingness to communicate about weight/diet predicted increased self-efficacy in weight management. Higher BMI scores were found to predict increased weight/obesity stigma, and increased frequency of U.S. restaurant food consumption, weight/obesity stigma, and reduced self-efficacy in weight management were found to predict increased levels of depression. The theoretical and practical implications of the findings are discussed, along with limitations and directions for future research.

Stretching of short monatomic gold chains-some model calculations

NASA Astrophysics Data System (ADS)

Sumali, Priyanka, Verma, Veena; Dharamvir, Keya

2012-06-01

The Mechanical properties of zig-zag monatomic gold chains containing 5 and 7 atoms were studied using the Siesta Code (SC), which works within the framework of DFT formalism and Gupta Potential (GP), which is an effective atom-atom potential. The zig-zag chains were stretched by keeping the end atoms fixed while rest of the atoms were relaxed till minimum energy is obtained. Energy, Force and Young's Modulus found using GP and SC were plotted as functions of total length. It is found that the breaking force in case of GP is of order of 1.6nN while for SIESTA is of the order of 2.9nN for both the chains.

Elasticity and photoelasticity relationships for polyethylene terephthalate fiber networks by molecular simulation

NASA Astrophysics Data System (ADS)

Nayak, Kapileswar; Das, Sushanta; Nanavati, Hemant

2008-01-01

We present a framework for the development of elasticity and photoelasticity relationships for polyethylene terephthalate fiber networks, incorporating aspects of the primary molecular structure. Semicrystalline polymeric fiber networks are modeled as sequentially arranged crystalline and amorphous regions. Rotational isomeric states-Monte Carlo simulations of amorphous chains of up to 360 bonds (degree of polymerization, DP =60), confined between and bridging infinite impenetrable crystalline walls, have been characterized by Ω, the probability density of the intercrystal separation h, and Δβ, the polarizability anisotropy. lnΩ and Δβ have been modeled as functions of h, yielding the chain deformation relationships. The development has been extended to the fiber network to yield the photoelasticity relationships. We execute our framework by fitting to experimental stress-elongation data and employing the single fitted parameter to directly predict the birefringence-elongation behavior, without any further fitting. Incorporating the effect of strain-induced crystallization into the framework makes it physically more meaningful and yields accurate predictions of the birefringence-elongation behavior.

Supply chain management/ Some lessons learned the hard way.

PubMed

Nuttall, Stephen

2013-01-01

This paper will look at some of the experiences, lessons and frustrations experienced in managing supply chains for business continuity. No-one has time to make all the mistakes, nor to learn all the lessons on their own, so it is useful to share experiences. Over the last 25 years, the author has been involved in supply chain management as a contract manager; a programme and project manager; and as a business continuity manager. Although times change, there are some fundamental principles that are absolutely critical in making sure that supply chains do what they are needed to do/ to keep business going. Supply chains are here to stay. Indeed, with today's drive towards outsourcing, best-shoring and contracting out, they are becoming more important every year and this will only continue over time. Moreover, in the highly competitive markets in which all organisations operate, suppliers may well be carrying out operations that not all that long ago would have been considered to be part of core business. Getting the right relationship with the supply chain is more critical than ever before.1 What does this mean to business continuity professionals? They need to think not just about their own BC plans, but about the plans of their suppliers, and even those of their suppliers' suppliers. This may seem obvious, but unlike internal BC plans written by and for an organisation, it must be considered just what a supplier's plans are designed to achieve. What business outcomes will their plans deliver? If they recover their own business, how does that affect the business they serve? Are others' assumptions of how they will react in line with theirs?

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

ERIC Educational Resources Information Center

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

Conceptual Modeling for Adaptive Environmental Assessment and Management in the Barycz Valley, Lower Silesia, Poland

PubMed Central

Magnuszewski, Piotr; Sendzimir, Jan; Kronenberg, Jakub

2005-01-01

The complexity of interactions in socio-ecological systems makes it very difficult to plan and implement policies successfully. Traditional environmental management and assessment techniques produce unsatisfactory results because they often ignore facets of system structure that underlie complexity: delays, feedbacks, and non-linearities. Assuming that causes are linked in a linear chain, they concentrate on technological developments (“hard path”) as the only solutions to environmental problems. Adaptive Management is recognized as a promising alternative approach directly addressing links between social and ecological systems and involving stakeholders in the analysis and decision process. This “soft path” requires special tools to facilitate collaboration between “experts” and stakeholders in analyzing complex situations and prioritizing policies and actions. We have applied conceptual modeling to increase communication, understanding and commitment in the project of seven NGOs “Sustainable Regional Development in the Odra Catchment”. The main goal was to help our NGO partners to facilitate their efforts related to developing sustainable policies and practices to respond to large-scale challenges (EU accession, global changes in climate and economy) to their natural, economic and socio-cultural heritages. Among the variety of sustainability issues explored by these NGOs, two (extensive agricultural practices and “green” local products) were examined by using Adaptive Management (AM) as a framework that would link analysis, discussion, research, actions and monitoring. Within the AM framework the project coordinators used tools of systems analysis (Mental Model Mapping) to facilitate discussions in which NGO professionals and local stakeholders could graphically diagram and study their understanding of what factors interacted and how they affect the region’s sustainability. These discussions produced larger-scale Regional Sustainability Models as well as more detailed sub-models of particular factors, processes, and feedback loops that appear critical to a sustainable future. The Regional Sustainability Model was used to identify a subset of key interacting factors (variables). For each variable, several sustainability indicators were suggested. The growing understanding and acceptance of the AM framework and systems analysis created a momentum both locally and within the region, which makes continued successful use of these indicators quite likely. In contrast to expert-driven projects that inject outside knowledge into a local context, this project established a broad basis for stakeholder-driven discussion that is articulated into goals, objectives, conceptual models, and indicators. The ability to learn and adapt in the AM framework increases the capacity to innovate and find policies and practices that enhance resilience and sustainability in a world in transition. PMID:16705818

Modeling methodology for supply chain synthesis and disruption analysis

NASA Astrophysics Data System (ADS)

Wu, Teresa; Blackhurst, Jennifer

2004-11-01

The concept of an integrated or synthesized supply chain is a strategy for managing today's globalized and customer driven supply chains in order to better meet customer demands. Synthesizing individual entities into an integrated supply chain can be a challenging task due to a variety of factors including conflicting objectives, mismatched incentives and constraints of the individual entities. Furthermore, understanding the effects of disruptions occurring at any point in the system is difficult when working toward synthesizing supply chain operations. Therefore, the goal of this research is to present a modeling methodology to manage the synthesis of a supply chain by linking hierarchical levels of the system and to model and analyze disruptions in the integrated supply chain. The contribution of this research is threefold: (1) supply chain systems can be modeled hierarchically (2) the performance of synthesized supply chain system can be evaluated quantitatively (3) reachability analysis is used to evaluate the system performance and verify whether a specific state is reachable, allowing the user to understand the extent of effects of a disruption.

Strategic information technology alliances for effective health-care supply chain management.

PubMed

Shih, Stephen C; Rivers, Patrick A; Hsu, H Y Sonya

2009-08-01

To gain and sustain competitive advantage, health-care providers have to continuously review and renovate their operational and information technology (IT) strategies through collaborative and cooperative endeavour with their supply chain channel members. This paper explores new ways of enhancing a health-care organization's responsiveness to changes and increasing its competitiveness through implementing strategic information technology alliances among channel members in a health-care supply chain network. An overview of issues and problems (e.g. bullwhip effect, negative externalities and free-riding phenomenon in multichannel supply chains) presented in the health-care supply chains is first delineated. This paper further goes over the issues of health-care supply chain coordination and integration for strategic IT alliances, followed by the discussion of the spillover effect of IT investments. A number of viable IT practices (such as information sharing and Internet-enabled supply chain portal) for effective health-care supply chain collaboration and coordination are then examined in this research. Finally, the paper discusses how strategic IT alliances can help improve the effectiveness of health-care supply chain management.

Implementing the National Framework for a Biothreat Field Response Mission Capability

DTIC Science & Technology

2013-09-01

14. SUBJECT TERMS Biothreat, bioterrorsim, public safety actionable assay , hazard assessment, biological assessment, bioresponse framework, weapons...Technology OVS Operation Vigilant Sample PCR Polymerase Chain Reaction PHAA Public Health Actionable Assay PSAA Public Safety Actionable Assay PT...needed.13 Over concerns from Congress regarding the suitability of handheld assays for field assessment, stakeholders from federal and state agencies

76 FR 7153 - Secretarial Business Development Mission; Transportation Infrastructure/Multimodal Products and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-09

...- modal freight and intelligent supply chain management, provides significant business [[Page 7154..., including port development, airport development, freight rail systems and technologies, supply chain systems... for U.S. engineers, program management firms, and manufacturers to contribute to the creation of new...

Four unprecedented cobalt(II) and cadmium(II) metal-organic frameworks based on a rigid tricarboxylate ligand: Synthesis, crystal structures, magnetic and fluorescence properties

NASA Astrophysics Data System (ADS)

Liu, Yaru; Liu, Lan; Zhang, Xiao; Wu, Jie

2018-03-01

A Co(II) MOF {[Co3(L)2(H2O)4](DMF)2}n (1) and three Cd(II) MOFs [Cd3(L)2(H2O)7]n (2), [Cd3(L)2(H2O)11]n (3) and [Cd3(L)2(DMF)2(H2O)]n (4) are synthesized based on the promising multifunctional tricarboxylate ligand 6-(3, 5-dicarboxyl phenyl) nicotinic acid (H3L). 1 exhibits a 3D framework with 1D channels which contains opposite-handedness helical chains based on the trinuclear Co(II) clusters. 2-4 are obtained depend on different reaction conditions. 2 displays a 3D framework, which is composed of two kinds of 2D layers linked with each other. 3 shows a rare tongue-and-groove-type bilayer structure. And 4 is an interesting 3D framework containing infinite 1D inorganic Cdsbnd Osbnd Cd chains. In these MOFs, the H3L ligand shows the versatile coordination modes and strong coordination ability. Furthermore, the magnetic and solid-state luminescent properties of the MOFs have been investigated.

Is food allergen analysis flawed? Health and supply chain risks and a proposed framework to address urgent analytical needs.

PubMed

Walker, M J; Burns, D T; Elliott, C T; Gowland, M H; Mills, E N Clare

2016-01-07

Food allergy is an increasing problem for those affected, their families or carers, the food industry and for regulators. The food supply chain is highly vulnerable to fraud involving food allergens, risking fatalities and severe reputational damage to the food industry. Many facets are being pursued to ameliorate the difficulties including better food labelling and the concept of thresholds of elicitation of allergy symptoms as risk management tools. These efforts depend to a high degree on the ability reliably to detect and quantify food allergens; yet all current analytical approaches exhibit severe deficiencies that jeopardise accurate results being produced particularly in terms of the risks of false positive and false negative reporting. If we fail to realise the promise of current risk assessment and risk management of food allergens through lack of the ability to measure food allergens reproducibly and with traceability to an international unit of measurement, the analytical community will have failed a significant societal challenge. Three distinct but interrelated areas of analytical work are urgently needed to address the substantial gaps identified: (a) a coordinated international programme for the production of properly characterised clinically relevant reference materials and calibrants for food allergen analysis; (b) an international programme to widen the scope of proteomics and genomics bioinformatics for the genera containing the major allergens to address problems in ELISA, MS and DNA methods; (c) the initiation of a coordinated international programme leading to reference methods for allergen proteins that provide results traceable to the SI. This article describes in more detail food allergy, the risks of inapplicable or flawed allergen analyses with examples and a proposed framework, including clinically relevant incurred allergen concentrations, to address the currently unmet and urgently required analytical requirements. Support for the above recommendations from food authorities, business organisations and National Measurement Institutes is important; however transparent international coordination is essential. Thus our recommendations are primarily addressed to the European Commission, the Health and Food Safety Directorate, DG Santé. A global multidisciplinary consortium is required to provide a curated suite of data including genomic and proteomic data on key allergenic food sources, made publically available on line.

"Cola-Game": An Innovative Approach to Teaching Inventory Management in a Supply Chain

ERIC Educational Resources Information Center

Dhumal, Parag; Sundararaghavan, P. S.; Nandkeolyar, Udayan

2008-01-01

In this article we present a game that can be used as a tool to educate students and managers on the issues in supply chain (SC), inventory management. The game has a bilevel demand with one level during regular times and another during sale times. The game could be played in two modes (independence and cooperation) and has been field tested in…

Managing Distance Education Institutions through Value Chain Analysis: the Nigerian Experience.

ERIC Educational Resources Information Center

Aderinto, J. A.; Akintayo, M. O.

Value chain analysis can gauge, analyze, and predict organization effects to control cost in light of achieving strategic organization objectives of distance education. Value chain analysis enables organizations to accomplish their goal or mission through cost effectiveness or differentiation. The value chain activity structure in a distance…

Cation–cation interactions and cation exchange in a series of isostructural framework uranyl tungstates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balboni, Enrica; Burns, Peter C., E-mail: pburns@nd.edu; Department of Chemistry and Biochemistry, University of Notre Dame, Notre Dame, IN 46556

2014-05-01

The isotypical compounds (UO{sub 2}){sub 3}(WO{sub 6})(H{sub 2}O){sub 5} (1), Ag(UO{sub 2}){sub 3}(WO{sub 6})(OH)(H{sub 2}O){sub 3} (2), K(UO{sub 2}){sub 3}(WO{sub 6})OH(H{sub 2}O){sub 4} (3), Rb(UO{sub 2}){sub 3}(WO{sub 6})(OH)(H{sub 2}O){sub 3.5} (4), and Cs(UO{sub 2}){sub 3}(WO{sub 6})OH(H{sub 2}O){sub 3} (5) were synthesized, characterized, and their structures determined. Each crystallizes in space group Cc. (1): a=12.979 (3), b=10.238 (2), c=11.302 (2), β=102.044 (2); (2): a=13.148 (2), b=9.520 (1), c=11.083 (2), β=101.568 (2); (3): a=13.111 (8), b=9.930 (6), c=11.242 (7), β=101.024 (7); (4): a=12.940 (2), b=10.231 (2), c=11.259(2), β=102.205 (2); (5): a=12.983 (3), b=10.191 (3), c=11.263 (4), β=101.661 (4). Compounds 1–5 are amore » framework of uranyl and tungsten polyhedra containing cation–cation interactions. The framework has three symmetrically distinct U(VI) cations, one tungsten, sixteen to eighteen oxygen atoms, and in 2–5, one monovalent cation. Each atom occupies a general position. Each U(VI) cation is present as a typical (UO{sub 2}){sup 2+} uranyl ion in an overall pentagonal bipyramidal coordination environment. Each pentagonal bipyramid shares two equatorial edges with two other pentagonal bipyramids, forming a trimer. Trimers are connected into chains by edge-sharing with WO{sub 6} octahedra. Chains are linked through cation–cation interactions between two symmetrically independent uranyl ions. This yields a remarkably complex system of intersecting channels that extend along [0 0 1] and [−1 1 0]. The cation exchange properties of 2 and 3 were characterized at room temperature and at 140 °C. - Graphical abstract: Chains of uranium and tungsten polyhedra are connected into a three dimensional framework by cation–cation interactions occurring between two symmetrically independent uranyl pentagonal bipyramids. Monovalent cations present in channels within the structure can be exchanged by room temperature or mild hydrothermal treatments. The framework of these compounds is robust to cation exchange and heat. (yellow polyhedra=uranium pentagonal bipyramids; blue polyhedra=tungsten octahedral, purple balls=K; yellow balls=Na; grey balls=Tl). - Highlights: • Five isostructural uranyl tungstates compounds were synthesized hydrothermally. • The structures consist of a chains of uranium and tungstate polyhedral. • Chains are connected into a framework by cation–cation interactions. • Cation exchange does not alter the structural integrity of the compounds. • Cation exchange was successful at room temperature and mild hydrothermal conditions.« less

Quantifying the environmental impact of an integrated human/industrial-natural system using life cycle assessment; a case study on a forest and wood processing chain.

PubMed

Schaubroeck, Thomas; Alvarenga, Rodrigo A F; Verheyen, Kris; Muys, Bart; Dewulf, Jo

2013-01-01

Life Cycle Assessment (LCA) is a tool to assess the environmental sustainability of a product; it quantifies the environmental impact of a product's life cycle. In conventional LCAs, the boundaries of a product's life cycle are limited to the human/industrial system, the technosphere. Ecosystems, which provide resources to and take up emissions from the technosphere, are not included in those boundaries. However, similar to the technosphere, ecosystems also have an impact on their (surrounding) environment through their resource usage (e.g., nutrients) and emissions (e.g., CH4). We therefore propose a LCA framework to assess the impact of integrated Techno-Ecological Systems (TES), comprising relevant ecosystems and the technosphere. In our framework, ecosystems are accounted for in the same manner as technosphere compartments. Also, the remediating effect of uptake of pollutants, an ecosystem service, is considered. A case study was performed on a TES of sawn timber production encompassing wood growth in an intensively managed forest ecosystem and further industrial processing. Results show that the managed forest accounted for almost all resource usage and biodiversity loss through land occupation but also for a remediating effect on human health, mostly via capture of airborne fine particles. These findings illustrate the potential relevance of including ecosystems in the product's life cycle of a LCA, though further research is needed to better quantify the environmental impact of TES.

76 FR 38614 - Transportation Infrastructure/Multimodal Products and Services Trade Mission to Doha, Qatar, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

...- modal freight and intelligent supply chain management, provides significant business opportunities in... technologies, supply chain systems and strategies; mass transportation systems; advanced vehicle technologies... opportunities for U.S. engineers, program management firms, and manufacturers to contribute to the creation of...

76 FR 32953 - Transportation Infrastructure/Multimodal Products and Services Trade Mission to Doha, Qatar, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... new systems, particularly those related to multimodal freight and intelligent supply chain management... technologies, supply chain systems and strategies; mass transportation systems; advanced vehicle technologies... country. There are excellent opportunities for U.S. engineers, program management firms, and manufacturers...

Supply Chain Management: Are You Maximizing Your Procurement Activity?

ERIC Educational Resources Information Center

Dobbin, James; Jenkins, Mike

2000-01-01

Today's purchasing professionals recognize the need to reduce non-value-added procedures (clerical functions) while emphasizing strategic planning. Results-oriented supply-chain managers need superb communication, negotiation, and leadership skills to achieve long-term value and resist the lowest, first- cost bids. (Contains 13 references.) (MLH)

77 FR 8839 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... supply chain management (SCM) practices, processes and metrics that could be beneficial to the Department... commercial supply chain management. Dated: January 31, 2012. Patricia L. Toppings, OSD Federal Register..., OH, 45433, or call 937-255-3636 x4674. Title; Associated Form; and OMB Number: Leading Edge Supply...

Hydrothermal synthesis, crystal structure and properties of 2-D and 3-D lanthanide sulfates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu Yan; Ding Shaohua; Zheng Xuefang

2007-07-15

Two new lanthanum sulfates DySO{sub 4}(OH) 1 and Eu{sub 2}(SO{sub 4}){sub 3}(H{sub 2}O){sub 8} 2 have been hydrothermally synthesized. The colorless crystals were characterized by IR, TGA, ICP and XRD. The structure was determined by single-crystal X-ray diffraction. 1 crystallizes with monoclinic symmetry, space group P2(1)/n [a=7.995(4) A, b=10.945(5) A, c=8.164(4) A, {alpha}=90{sup o}, {beta}=93.619(6){sup o}, {gamma}=90{sup o}, V=713.0(5) A{sup 3}, Z=8]. It displays a three-dimensional framework, based on the novel Dy-O chains connected by the sulfate groups through helical chains. 2 crystallizes with monoclinic symmetry, space group C2/c, [a=13.5605(17) A, b=6.7676(8) A, c=18.318(2) A, {alpha}=90{sup o}, {beta}=102.265(2){sup o}, {gamma}=90{supmore » o}, V=1642.7 (4) A{sup 3}, Z=4]. Its layered framework is attained by the europium atoms connected by the sulfate groups arranged in a helical manner. - Graphical abstract: Two new lanthanum sulfates DySO{sub 4}(OH) 1 and Eu{sub 2} (SO{sub 4}){sub 3} (H{sub 2}O){sub 8} 2 have been hydrothermally synthesized. The colorless crystals were characterized by IR, TGA, ICP and XRD. The structure was determined by single-crystal X-ray diffraction. It displays a three dimensional framework, based on the novel Dy-O chains connected by the sulfate groups through helical chains.« less

Department of Commerce Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Clarify Amendment 13 and Subsequent Frameworks of 0648-AW95 the Northeast Multispecies Fishery Management... 0648-AY41 70 Framework 21 to the Atlantic Sea Scallop Fishery Management Plan 0648-AY43 71 Fishery...-Grouper Fishery Management Plan of the South Atlantic 0648-AX75 85 Framework Adjustment 44 and...

A common evaluation framework for the African Health Initiative.

PubMed

Bryce, Jennifer; Requejo, Jennifer Harris; Moulton, Lawrence H; Ram, Malathi; Black, Robert E

2013-01-01

The African Health Initiative includes highly diverse partnerships in five countries (Ghana, Mozambique, Rwanda, Tanzania, and Zambia), each of which is working to improve population health by strengthening health systems and to evaluate the results. One aim of the Initiative is to generate cross-site learning that can inform implementation in the five partnerships during the project period and identify lessons that may be generalizable to other countries in the region. Collaborators in the Initiative developed a common evaluation framework as a basis for this cross-site learning. This paper describes the components of the framework; this includes the conceptual model, core metrics to be measured in all sites, and standard guidelines for reporting on the implementation of partnership activities and contextual factors that may affect implementation, or the results it produces. We also describe the systems that have been put in place for data management, data quality assessments, and cross-site analysis of results. The conceptual model for the Initiative highlights points in the causal chain between health system strengthening activities and health impact where evidence produced by the partnerships can contribute to learning. This model represents an important advance over its predecessors by including contextual factors and implementation strength as potential determinants, and explicitly including equity as a component of both outcomes and impact. Specific measurement challenges include the prospective documentation of program implementation and contextual factors. Methodological issues addressed in the development of the framework include the aggregation of data collected using different methods and the challenge of evaluating a complex set of interventions being improved over time based on continuous monitoring and intermediate results.

Middleware for Plug and Play Integration of Heterogeneous Sensor Resources into the Sensor Web

PubMed Central

Toma, Daniel M.; Jirka, Simon; Del Río, Joaquín

2017-01-01

The study of global phenomena requires the combination of a considerable amount of data coming from different sources, acquired by different observation platforms and managed by institutions working in different scientific fields. Merging this data to provide extensive and complete data sets to monitor the long-term, global changes of our oceans is a major challenge. The data acquisition and data archival procedures usually vary significantly depending on the acquisition platform. This lack of standardization ultimately leads to information silos, preventing the data to be effectively shared across different scientific communities. In the past years, important steps have been taken in order to improve both standardization and interoperability, such as the Open Geospatial Consortium’s Sensor Web Enablement (SWE) framework. Within this framework, standardized models and interfaces to archive, access and visualize the data from heterogeneous sensor resources have been proposed. However, due to the wide variety of software and hardware architectures presented by marine sensors and marine observation platforms, there is still a lack of uniform procedures to integrate sensors into existing SWE-based data infrastructures. In this work, a framework aimed to enable sensor plug and play integration into existing SWE-based data infrastructures is presented. First, an analysis of the operations required to automatically identify, configure and operate a sensor are analysed. Then, the metadata required for these operations is structured in a standard way. Afterwards, a modular, plug and play, SWE-based acquisition chain is proposed. Finally different use cases for this framework are presented. PMID:29244732

Strategic contracting practices to improve procurement of health commodities

PubMed Central

Arney, Leslie; Yadav, Prashant; Miller, Roger; Wilkerson, Taylor

2014-01-01

ABSTRACT Public-sector entities responsible for procurement of essential medicines and health commodities in developing countries often lack the technical capacity to efficiently ensure supply security. Under strict public scrutiny and pressures to be transparent, many agencies continue to use archaic procurement methods and to depend on inflexible forecasts and cumbersome tendering processes. On the basis of semi-structured literature reviews and interviews, we identified framework agreements as a strategic procurement practice used by the U.S. federal government that may also be suitable for global health supply chains. Framework agreements are long-term contracts that provide the terms and conditions under which smaller repeat purchasing orders may be issued for a defined period of time. Such agreements are common in U.S. and United Nations procurement systems and in other developed countries and multilateral organizations. In contrast, framework agreements appear to be seldom used in procurement of health commodities in countries of sub-Saharan Africa. The current practice of floating tenders multiple times a year contributes to long lead times and stock-outs, and it hampers the manufacturer's or supplier's ability to plan and respond to the government's needs. To date, government's use of strategic contracting practices in public procurement of health commodities has not received much attention in most developing countries. It may present an opportunity for substantial improvements in procurement efficiency and commodity availability. Enabling legislation and strengthened technical capacity to develop and manage long-term contracts could facilitate the use of framework contracts in sub-Saharan Africa, with improved supply security and cost savings likely to result. PMID:25276589

Strategic contracting practices to improve procurement of health commodities.

PubMed

Arney, Leslie; Yadav, Prashant; Miller, Roger; Wilkerson, Taylor

2014-08-01

Public-sector entities responsible for procurement of essential medicines and health commodities in developing countries often lack the technical capacity to efficiently ensure supply security. Under strict public scrutiny and pressures to be transparent, many agencies continue to use archaic procurement methods and to depend on inflexible forecasts and cumbersome tendering processes. On the basis of semi-structured literature reviews and interviews, we identified framework agreements as a strategic procurement practice used by the U.S. federal government that may also be suitable for global health supply chains. Framework agreements are long-term contracts that provide the terms and conditions under which smaller repeat purchasing orders may be issued for a defined period of time. Such agreements are common in U.S. and United Nations procurement systems and in other developed countries and multilateral organizations. In contrast, framework agreements appear to be seldom used in procurement of health commodities in countries of sub-Saharan Africa. The current practice of floating tenders multiple times a year contributes to long lead times and stock-outs, and it hampers the manufacturer's or supplier's ability to plan and respond to the government's needs. To date, government's use of strategic contracting practices in public procurement of health commodities has not received much attention in most developing countries. It may present an opportunity for substantial improvements in procurement efficiency and commodity availability. Enabling legislation and strengthened technical capacity to develop and manage long-term contracts could facilitate the use of framework contracts in sub-Saharan Africa, with improved supply security and cost savings likely to result.

Line patterning of anisotropic spin chains by polarized laser for application in micro-thermal management

NASA Astrophysics Data System (ADS)

Terakado, Nobuaki; Takahashi, Ryosuke; Takahashi, Yoshihiro; Fujiwara, Takumi

2017-05-01

The control of heat flow has become increasingly important in energy saving and harvesting. Among various thermal management materials, spinon thermal conductivity materials are promising for heat flow control at microscales because they exhibit high, anisotropic thermal conductivity resulting from spin chains. However, there has been only little development of the materials for controlling heat flow. Here, we present the line patterning of the spin chain structure on a SrCuO2 nanocrystalline film by laser scanning. When the polarization direction of laser light was orthogonal to the scanning direction, we found that the spin-chain structure anisotropically grew on the patterned line.

Shelf life modelling for first-expired-first-out warehouse management

PubMed Central

Hertog, Maarten L. A. T. M.; Uysal, Ismail; McCarthy, Ultan; Verlinden, Bert M.; Nicolaï, Bart M.

2014-01-01

In the supply chain of perishable food products, large losses are incurred between farm and fork. Given the limited land resources and an ever-growing population, the food supply chain is faced with the challenge of increasing its handling efficiency and minimizing post-harvest food losses. Huge value can be added by optimizing warehouse management systems, taking into account the estimated remaining shelf life of the product, and matching it to the requirements of the subsequent part of the handling chain. This contribution focuses on how model approaches estimating quality changes and remaining shelf life can be combined in optimizing first-expired-first-out cold chain management strategies for perishable products. To this end, shelf-life-related performance indicators are used to introduce remaining shelf life and product quality in the cost function when optimizing the supply chain. A combinatorial exhaustive-search algorithm is shown to be feasible as the complexity of the optimization problem is sufficiently low for the size and properties of a typical commercial cold chain. The estimated shelf life distances for a particular batch can thus be taken as a guide to optimize logistics. PMID:24797134

Swelling of biological and semiflexible polyelectrolytes.

PubMed

Dobrynin, Andrey V; Carrillo, Jan-Michael Y

2009-10-21

We have developed a theoretical model of swelling of semiflexible (biological) polyelectrolytes in salt solutions. Our approach is based on separation of length scales which allowed us to split a chain's electrostatic energy into two parts that describe local and remote electrostatic interactions along the polymer backbone. The local part takes into account interactions between charged monomers that are separated by distances along the polymer backbone shorter than the chain's persistence length. These electrostatic interactions renormalize chain persistence length. The second part includes electrostatic interactions between remote charged pairs along the polymer backbone located at distances larger than the chain persistence length. These interactions are responsible for chain swelling. In the framework of this approach we calculated effective chain persistence length and chain size as a function of the Debye screening length, chain degree of ionization, bare persistence length and chain degree of polymerization. Our crossover expression for the effective chain's persistence length is in good quantitative agreement with the experimental data on DNA. We have been able to fit experimental datasets by using two adjustable parameters: DNA ionization degree (α = 0.15-0.17) and a bare persistence length (l(p) = 40-44 nm).

Environmental and sustainability ethics in supply chain management.

PubMed

Beamon, Benita M

2005-04-01

Environmentally Conscious Supply Chain Management (ECSCM refers to the control exerted over all immediate and eventual environmental effects of products and processes associated with converting raw materials into final products. While much work has been done in this area, the focus has traditionally been on either: product recovery (recycling, remanufacturing, or re-use) or the product design function only (e.g., design for environment). Environmental considerations in manufacturing are often viewed as separate from traditional, value-added considerations. However, the case can be made that professional engineers have an ethical responsibility to consider the immediate and eventual environmental impacts of products and processes that they design and/or manage. This paper describes ECSCM as a component of engineering ethics, and highlights the major issues associated with ethical decision-making in supply chain management.

Computational modelling of cell chain migration reveals mechanisms that sustain follow-the-leader behaviour

PubMed Central

Wynn, Michelle L.; Kulesa, Paul M.; Schnell, Santiago

2012-01-01

Follow-the-leader chain migration is a striking cell migratory behaviour observed during vertebrate development, adult neurogenesis and cancer metastasis. Although cell–cell contact and extracellular matrix (ECM) cues have been proposed to promote this phenomenon, mechanisms that underlie chain migration persistence remain unclear. Here, we developed a quantitative agent-based modelling framework to test mechanistic hypotheses of chain migration persistence. We defined chain migration and its persistence based on evidence from the highly migratory neural crest model system, where cells within a chain extend and retract filopodia in short-lived cell contacts and move together as a collective. In our agent-based simulations, we began with a set of agents arranged as a chain and systematically probed the influence of model parameters to identify factors critical to the maintenance of the chain migration pattern. We discovered that chain migration persistence requires a high degree of directional bias in both lead and follower cells towards the target. Chain migration persistence was also promoted when lead cells maintained cell contact with followers, but not vice-versa. Finally, providing a path of least resistance in the ECM was not sufficient alone to drive chain persistence. Our results indicate that chain migration persistence depends on the interplay of directional cell movement and biased cell–cell contact. PMID:22219399

76 FR 24848 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

...: USDA Web Based Supply Chain Management System (WBSCMs). OMB Control Number: 0581--NEW. Summary of... using the secure Web Based Supply Chain Management System (WBSCM). Vendors must be registered, and have... assists AMS with making a determination whether a business is viable and capable of supplying product to...

Is the U.S. Army Field Artillery Prepared to Support the Next Major Combat Operation?

DTIC Science & Technology

2013-05-23

Coyle, C. John Langley Jr., Brian J . Gibson, Robert A . Novack, Edward J . Bardi , Supply Chain Management; A Logistics Perspective (Mason, OH: South...Edward J . Bardi . Supply Chain Management; A Logistics Perspective. Mason, OH: South-Western Cengage Learning, 2008. Dastrup, Boyd. The Field...

Building oceanographic and atmospheric observation networks by composition: unmanned vehicles, communication networks, and planning and execution control frameworks

NASA Astrophysics Data System (ADS)

Sousa, J. T.; Pinto, J.; Martins, R.; Costa, M.; Ferreira, F.; Gomes, R.

2014-12-01

The problem of developing mobile oceanographic and atmospheric observation networks (MOAO) with coordinated air and ocean vehicles is discussed in the framework of the communications and control software tool chain developed at Underwater Systems and Technologies Laboratory (LSTS) from Porto University. This is done with reference to field experiments to illustrate key capabilities and to assess future MOAO operations. First, the motivation for building MOAO by "composition" of air and ocean vehicles, communication networks, and planning and execution control frameworks is discussed - in networked vehicle systems information and commands are exchanged among multiple vehicles and operators, and the roles, relative positions, and dependencies of these vehicles and operators change during operations. Second, the planning and execution control framework developed at LSTS for multi-vehicle systems is discussed with reference to key concepts such as autonomy, mixed-initiative interactions, and layered organization. Third, the LSTS tool software tool chain is presented to show how to develop MOAO by composition. The tool chain comprises the Neptus command and control framework for mixed initiative interactions, the underlying IMC messaging protocol, and the DUNE on-board software. Fourth, selected LSTS operational deployments illustrate MOAO capability building. In 2012 we demonstrated the use of UAS to "ferry" data from UUVs located beyond line of sight (BLOS). In 2013 we demonstrated coordinated observations of coastal fronts with small UAS and UUVs, "bent" BLOS through the use of UAS as communication relays, and UAS tracking of juvenile hammer-head sharks. In 2014 we demonstrated UUV adaptive sampling with the closed loop controller of the UUV residing on a UAS; this was done with the help of a Wave Glider ASV with a communications gateway. The results from these experiments provide a background for assessing potential future UAS operations in a compositional MOAO.

The Research on Integrated Strategy of Supply Chain Information Systems in the Automobile Industry Based on Order-To-Delivery Mode

NASA Astrophysics Data System (ADS)

Li, Ming; Gan, Lianzhen; He, Xuefeng

The automotive industry there are different degrees of impairment of many companies supply chain IT strategy. In this paper, in which the automotive industry supply chain management business cooperation between enterprises loose, poor exchange of information leading to the presence or delays in product customization, supply of raw materials, material control, production planning and control, sales and service and a fast response propose a series of typical problems of scientific and rational supply chain information integration strategy. The strategy through the development system integration platform, improve internal ERP system, implementation of supply chain management and other methods. Put some protection principles in the information process, to ensure the correct implementation of supply chain IT strategy, and ultimately achieve collaborative business development concept and enhance the automotive industry as a whole level of information.

Development and Validation of a Quantitative Framework and Management Expectation Tool for the Selection of Bioremediation Approaches at Chlorinated Ethene Sites

DTIC Science & Technology

2015-12-01

FINAL REPORT Development and Validation of a Quantitative Framework and Management Expectation Tool for the Selection of Bioremediation ...TITLE AND SUBTITLE Development and Validation of a Quantitative Framework and Management Expectation Tool for the Selection of Bioremediation ...project ER-201129 was to develop and validate a framework used to make bioremediation decisions based on site-specific physical and biogeochemical

Bayesian analysis of non-homogeneous Markov chains: application to mental health data.

PubMed

Sung, Minje; Soyer, Refik; Nhan, Nguyen

2007-07-10

In this paper we present a formal treatment of non-homogeneous Markov chains by introducing a hierarchical Bayesian framework. Our work is motivated by the analysis of correlated categorical data which arise in assessment of psychiatric treatment programs. In our development, we introduce a Markovian structure to describe the non-homogeneity of transition patterns. In doing so, we introduce a logistic regression set-up for Markov chains and incorporate covariates in our model. We present a Bayesian model using Markov chain Monte Carlo methods and develop inference procedures to address issues encountered in the analyses of data from psychiatric treatment programs. Our model and inference procedures are implemented to some real data from a psychiatric treatment study. Copyright 2006 John Wiley & Sons, Ltd.

Diterpene lactones with labdane, halimane and clerodane frameworks.

PubMed

Silva, Lúcia; Gomes, Arlindo C; Rodilla, Jesus M L

2011-04-01

The labdane, halimane and clerodane type diterpenoids are compounds that have been isolated in plants of several families. These molecules and their derivatives with a lactone group on the side chain or on the decaline system, have a great interest because of their biological properties as insect antifeedant, antiviral, cytotoxic and trypanocidal. The scope of this review is lactones diterpenoids with labdane, halimane and clerodane frameworks.

Muon g-2 Reconstruction and Analysis Framework for the Muon Anomalous Precession Frequency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaw, Kim Siang

The Muon g-2 experiment at Fermilab, with the aim to measure the muon anomalous magnetic moment to an unprecedented level of 140~ppb, has started beam and detector commissioning in Summer 2017. To deal with incoming data projected to be around tens of petabytes, a robust data reconstruction and analysis chain based on Fermilab's \\textit{art} event-processing framework is developed. Herein, I report the current status of the framework, together with its novel features such as multi-threaded algorithms for online data quality monitor (DQM) and fast-turnaround operation (nearline). Performance of the framework during the commissioning run is also discussed.

Reflective practice: a framework for case manager development.

PubMed

Brubakken, Karen; Grant, Sara; Johnson, Mary K; Kollauf, Cynthia

2011-01-01

The role of a nurse case manager (NCM) incorporates practice that is built upon knowledge gained in other roles as well as components unique to case management. The concept of reflective practice was used in creating a framework to recognize the developmental stages that occur within community based case management practice. The formation of this framework and its uses are described in this article. The practice setting is a community based case management department in a large midwestern metropolitan health care system with Magnet recognition. Advanced practice nurses provide care for clients with chronic health conditions. Twenty-four narratives were used to identify behaviors of community based case managers and to distinguish stages of practice. The behaviors of advanced practice found within the narratives were labeled and analyzed for similarities. Related behaviors were grouped and descriptor statements were written. These statements grouped into 3 domains of practice: relationship/partnership, coordination/collaboration, and clinical knowledge/decision making. The statements in each domain showed practice variations from competent to expert, and 3 stages were determined. Reliability and validity of the framework involved analysis of additional narratives. The reflective practice process, used for monthly case review presentations, provides opportunity for professional development and group learning focused on improving case manager practice. The framework is also being used in orientation as new case managers acclimate to the role. Reflective writing has unveiled the richness and depth of nurse case manager practice. The depth of knowledge and skills involved in community-based case management is captured within this reflective practice framework. This framework provides a format for describing community based case manager practice development over the course of time and has been used as a tool for orientation and peer review.

Illustrating Business Marketing Concepts through the Value Chain Game

ERIC Educational Resources Information Center

Liao-Troth, Sara; Thomas, Stephanie P.; Webb, G. Scott

2015-01-01

The Value Chain Game is an activity that helps students to develop a holistic understanding of the processes and challenges in managing the value chain so that customer needs are met. Competing value chains work to produce and sell two products. Seasonal demand, quality defects, transportation delays, and audits offer complexities that represent…

What Happens When the Supply Chain Breaks? Implications for the Army Supply Chain Under Attack

DTIC Science & Technology

2003-05-22

Supply Chain Integration office with Secretariat level leadership to facilitate DoD Component implementation of supply chain management practices...rather than cyber attack. Tim Belcher, Chief Technology Officer for Riptech, a computer security firm said “It was always assumed that a small group of

76 FR 28328 - Fisheries of the Northeastern United States; Northeast Skate Complex Fishery; Framework Adjustment 1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

... alternatives for each of three principal management measures: (1) The primary possession limit affecting the... measures in Framework Adjustment 1 to the Northeast Skate Complex Fishery Management Plan (Skate FMP). Framework Adjustment 1 was developed by the New England Fishery Management Council (Council) to adjust the...

Gamifying Self-Management of Chronic Illnesses: A Mixed-Methods Study

PubMed Central

Wills, Gary; Ranchhod, Ashok

2016-01-01

Background Self-management of chronic illnesses is an ongoing issue in health care research. Gamification is a concept that arose in the field of computer science and has been borrowed by many other disciplines. It is perceived by many that gamification can improve the self-management experience of people with chronic illnesses. This paper discusses the validation of a framework (called The Wheel of Sukr) that was introduced to achieve this goal. Objective This research aims to (1) discuss a gamification framework targeting the self-management of chronic illnesses and (2) validate the framework by diabetic patients, medical professionals, and game experts. Methods A mixed-method approach was used to validate the framework. Expert interviews (N=8) were conducted in order to validate the themes of the framework. Additionally, diabetic participants completed a questionnaire (N=42) in order to measure their attitudes toward the themes of the framework. Results The results provide a validation of the framework. This indicates that gamification might improve the self-management of chronic illnesses, such as diabetes. Namely, the eight themes in the Wheel of Sukr (fun, esteem, socializing, self-management, self-representation, motivation, growth, sustainability) were perceived positively by 71% (30/42) of the participants with P value <.001. Conclusions In this research, both the interviews and the questionnaire yielded positive results that validate the framework (The Wheel of Sukr). Generally, this study indicates an overall acceptance of the notion of gamification in the self-management of diabetes. PMID:27612632

Gamifying Self-Management of Chronic Illnesses: A Mixed-Methods Study.

PubMed

AlMarshedi, Alaa; Wills, Gary; Ranchhod, Ashok

2016-09-09

Self-management of chronic illnesses is an ongoing issue in health care research. Gamification is a concept that arose in the field of computer science and has been borrowed by many other disciplines. It is perceived by many that gamification can improve the self-management experience of people with chronic illnesses. This paper discusses the validation of a framework (called The Wheel of Sukr) that was introduced to achieve this goal. This research aims to (1) discuss a gamification framework targeting the self-management of chronic illnesses and (2) validate the framework by diabetic patients, medical professionals, and game experts. A mixed-method approach was used to validate the framework. Expert interviews (N=8) were conducted in order to validate the themes of the framework. Additionally, diabetic participants completed a questionnaire (N=42) in order to measure their attitudes toward the themes of the framework. The results provide a validation of the framework. This indicates that gamification might improve the self-management of chronic illnesses, such as diabetes. Namely, the eight themes in the Wheel of Sukr (fun, esteem, socializing, self-management, self-representation, motivation, growth, sustainability) were perceived positively by 71% (30/42) of the participants with P value <.001. In this research, both the interviews and the questionnaire yielded positive results that validate the framework (The Wheel of Sukr). Generally, this study indicates an overall acceptance of the notion of gamification in the self-management of diabetes.

Near real-time, on-the-move software PED using VPEF

NASA Astrophysics Data System (ADS)

Green, Kevin; Geyer, Chris; Burnette, Chris; Agarwal, Sanjeev; Swett, Bruce; Phan, Chung; Deterline, Diane

2015-05-01

The scope of the Micro-Cloud for Operational, Vehicle-Based EO-IR Reconnaissance System (MOVERS) development effort, managed by the Night Vision and Electronic Sensors Directorate (NVESD), is to develop, integrate, and demonstrate new sensor technologies and algorithms that improve improvised device/mine detection using efficient and effective exploitation and fusion of sensor data and target cues from existing and future Route Clearance Package (RCP) sensor systems. Unfortunately, the majority of forward looking Full Motion Video (FMV) and computer vision processing, exploitation, and dissemination (PED) algorithms are often developed using proprietary, incompatible software. This makes the insertion of new algorithms difficult due to the lack of standardized processing chains. In order to overcome these limitations, EOIR developed the Government off-the-shelf (GOTS) Video Processing and Exploitation Framework (VPEF) to be able to provide standardized interfaces (e.g., input/output video formats, sensor metadata, and detected objects) for exploitation software and to rapidly integrate and test computer vision algorithms. EOIR developed a vehicle-based computing framework within the MOVERS and integrated it with VPEF. VPEF was further enhanced for automated processing, detection, and publishing of detections in near real-time, thus improving the efficiency and effectiveness of RCP sensor systems.

Assembly and property research on seven 0D-3D complexes derived from imidazole dicarboxylate and 1,2-bi(pyridin-4-yl)ethene

NASA Astrophysics Data System (ADS)

Mu, Bao; Li, Qian; Lv, Lei; Yang, Dan-Dan; Wang, Qing; Huang, Ru-Dan

2015-03-01

The hydrothermal reaction of transition metals, 1H-imidazole-4,5-dicarboxylic acid (H3ImDC) and 1,2-bi(pyridin-4-yl)ethene (bpe) affords a series of new complexes, namely, [Mn(HImDC)(bpe)(H2O)] (1), [M(H2ImDC)2(H2O)2]·(bpe) (M=Fe(2), Co(3), Zn(4), Cd(6)), [Zn3(ImDC)2(bpe)(H2O)]·3H2O (5) and [Cd(H2ImDC)(bpe)] (7), which are characterized by elemental analyses, IR, TG, XRPD and single crystal X-ray diffraction. Complex 1 exhibits a one dimensional (1D) zigzag chain with two types of irregular rings, and the 1D chains are linked to form a three dimensional (3D) supramolecular framework by the hydrogen bonding interactions (O-H•••O and O-H•••N). Complexes 2-4 and 6 are isomorphous, and they display the mononuclear structures. In these complexes, the O-H•••O and O-H•••N hydrogen bonds play an important role in sustaining the whole 3D supramolecular frameworks. Complex 5 shows a (3,3)-connected 3D framework with (103) topology, and the lattice water molecules as guest molecules exist in the 3D framework. Complex 7 is a wave-like two dimensional (2D) structure, in which the adjacent 1D chains point at the opposite directions. Moreover, the fluorescent properties of complexes 1-7 and the magnetic property of 1 have been investigated. The water vapor adsorption for complex 5 has been researched at 298 K.

Utilizing Radiofrequency Identification Technology to Improve Safety and Management of Blood Bank Supply Chains.

PubMed

Coustasse, Alberto; Meadows, Pamela; Hall, Robert S; Hibner, Travis; Deslich, Stacie

2015-11-01

The importance of efficiency in the supply chain of perishable products, such as the blood products used in transfusion services, cannot be overstated. Many problems can occur, such as the outdating of products, inventory management issues, patient misidentification, and mistransfusion. The purpose of this article was to identify the benefits and barriers associated with radiofrequency identification (RFID) usage in improving the blood bank supply chain. The methodology for this study was a qualitative literature review following a systematic approach. The review was limited to sources published from 2000 to 2014 in the English language. Sixty-five sources were found, and 56 were used in this research study. According to the finding of the present study, there are numerous benefits and barriers to RFID utilization in blood bank supply chains. RFID technology offers several benefits with regard to blood bank product management, including decreased transfusion errors, reduction of product loss, and more efficient inventory management. Barriers to RFID implementation include the cost associated with system implementation and patient privacy issues. Implementation of an RFID system can be a significant investment. However, when observing the positive impact that such systems may have on transfusion safety and inventory management, the cost associated with RFID systems can easily be justified. RFID in blood bank inventory management is vital to ensuring efficient product inventory management and positive patient outcomes.

A patient-focused framework integrating self-management and informatics.

PubMed

Knight, Elizabeth P; Shea, Kimberly

2014-03-01

This article introduces a framework to (a) guide chronic illness self-management interventions through the integration of self-management and nursing informatics, (b) focus self-management research, and (c) promote ethical, patient-empowering technology use by practicing nurses. Existing theory and research focusing on chronic illness, self-management, health-enabling technology, and nursing informatics were reviewed and examined and key concepts were identified. A care paradigm focusing on concordance, rather than compliance, served as the overall guiding principle. This framework identifies key relationships among self-management (patient behaviors), health force (patient characteristics), and patient-defined goals. The role of health-enabling technology supporting these relationships is explored in the context of nursing informatics. The Empowerment Informatics framework can guide intervention design and evaluation and support practicing nurses' ethical use of technology as part of self-management support. Nurses worldwide provide support to patients who are living with chronic illnesses. As pressures related to cost and access to care increase, technology-enabled self-management interventions will become increasingly common. This patient-focused framework can guide nursing practice using technology that prioritizes patient needs. © 2013 Sigma Theta Tau International.

Contraception supply chain challenges: a review of evidence from low- and middle-income countries.

PubMed

Mukasa, Bakali; Ali, Moazzam; Farron, Madeline; Van de Weerdt, Renee

2017-10-01

To identify and assess factors determining the functioning of supply chain systems for modern contraception in low- and middle-income countries (LMICs), and to identify challenges contributing to contraception stockouts that may lead to unmet need. Scientific databases and grey literature were searched including Database of Abstracts of Reviews of Effectiveness (DARE), PubMed, MEDLINE, POPLINE, CINAHL, Academic Search Complete, Science Direct, Web of Science, Cochrane Central, Google Scholar, WHO databases and websites of key international organisations. Studies indicated that supply chain system inefficiencies significantly affect availability of modern FP and contraception commodities in LMICs, especially in rural public facilities where distribution barriers may be acute. Supply chain failures or bottlenecks may be attributed to: weak and poorly institutionalized logistic management information systems (LMIS), poor physical infrastructures in LMICs, lack of trained and dedicated staff for supply chain management, inadequate funding, and rigid government policies on task sharing. However, there is evidence that implementing effective LMISs and involving public and private providers will distribution channels resulted in reduction in medical commodities' stockout rates. Supply chain bottlenecks contribute significantly to persistent high stockout rates for modern contraceptives in LMICs. Interventions aimed at enhancing uptake of contraceptives to reduce the problem of unmet need in LMICs should make strong commitments towards strengthening these countries' health commodities supply chain management systems. Current evidence is limited and additional, and well-designed implementation research on contraception supply chain systems is warranted to gain further understanding and insights on the determinants of supply chain bottlenecks and their impact on stockouts of contraception commodities.

Integrating strategic and tactical decisions in livestock supply chain using bi-level programming, case study: Iran poultry supply chain.

PubMed

Teimoury, Ebrahim; Jabbarzadeh, Armin; Babaei, Mohammadhosein

2017-01-01

Inventory management has frequently been targeted by researchers as one of the most pivotal problems in supply chain management. With the expansion of research studies on inventory management in supply chains, perishable inventory has been introduced and its fundamental differences from non-perishable inventory have been emphasized. This article presents livestock as a type of inventory that has been less studied in the literature. Differences between different inventory types, affect various levels of strategic, tactical and operational decision-making. In most articles, different levels of decision-making are discussed independently and sequentially. In this paper, not only is the livestock inventory introduced, but also a model has been developed to integrate decisions across different levels of decision-making using bi-level programming. Computational results indicate that the proposed bi-level approach is more efficient than the sequential decision-making approach.

Integrating strategic and tactical decisions in livestock supply chain using bi-level programming, case study: Iran poultry supply chain

PubMed Central

Jabbarzadeh, Armin; Babaei, Mohammadhosein

2017-01-01

Inventory management has frequently been targeted by researchers as one of the most pivotal problems in supply chain management. With the expansion of research studies on inventory management in supply chains, perishable inventory has been introduced and its fundamental differences from non-perishable inventory have been emphasized. This article presents livestock as a type of inventory that has been less studied in the literature. Differences between different inventory types, affect various levels of strategic, tactical and operational decision-making. In most articles, different levels of decision-making are discussed independently and sequentially. In this paper, not only is the livestock inventory introduced, but also a model has been developed to integrate decisions across different levels of decision-making using bi-level programming. Computational results indicate that the proposed bi-level approach is more efficient than the sequential decision-making approach. PMID:28982180

A "simulation chain" to define a Multidisciplinary Decision Support System for landslide risk management in pyroclastic soils

NASA Astrophysics Data System (ADS)

Damiano, E.; Mercogliano, P.; Netti, N.; Olivares, L.

2012-04-01

This paper proposes a Multidisciplinary Decision Support System (MDSS) as an approach to manage rainfall-induced shallow landslides of the flow type (flowslides) in pyroclastic deposits. We stress the need to combine information from the fields of meteorology, geology, hydrology, geotechnics and economics to support the agencies engaged in land monitoring and management. The MDSS consists of a "simulation chain" to link rainfall to effects in terms of infiltration, slope stability and vulnerability. This "simulation chain" was developed at the Euro-Mediterranean Centre for Climate Change (CMCC) (meteorological aspects), at the Geotechnical Laboratory of the Second University of Naples (hydrological and geotechnical aspects) and at the Department of Economics of the University of Naples "Federico II" (economic aspects). The results obtained from the application of this simulation chain in the Cervinara area during eleven years of research allowed in-depth analysis of the mechanisms underlying a flowslide in pyroclastic soil.

Molecular mechanism of hydrocarbons binding to the metal–organic framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Xiuquan; Wick, Collin D.; Thallapally, Praveen K.

The adsorption and diffusivity of methane, ethane, n-butane, n-hexane and cyclohexane in a metal organic framework (MOF) with the organic linker tetrakis[4-(carboxyphenyl)oxamethyl]methane, the metal salt, Zn2+, and organic pillar, 4,4’-bipyridin was studied using molecular dynamics simulations. For the n-alkanes, the longer the chain, the lower the free energy of adsorption, which was attributed to a greater number of contacts between the alkane and MOF. Cyclohexane had a slightly higher adsorption free energy than n-hexane. Furthermore, for cyclo- and n-hexane, there were no significant differences in adsorption free energies between systems with low to moderate loadings. The diffusivity of the n-alkanesmore » was found to strongly depend on chain length with slower diffusion for longer chains. Cyclohexane had no effective diffusion, suggesting that the selectivity the MOF has towards n-hexane over cyclohexane is the result of kinetics instead of energetics. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.« less

Development of a Resource Manager Framework for Adaptive Beamformer Selection

DTIC Science & Technology

2013-12-27

DEVELOPMENT OF A RESOURCE MANAGER FRAMEWORK FOR ADAPTIVE BEAMFORMER SELECTION DISSERTATION Jeremy P. Stringer, Major, USAF AFIT-ENG-DS-13-D-01...Force, the United States Department of Defense or the United States Government. AFIT-ENG-DS-13-D-01 DEVELOPMENT OF A RESOURCE MANAGER FRAMEWORK FOR...ADAPTIVE BEAMFORMER SELECTION DISSERTATION Presented to the Faculty Graduate School of Engineering and Management Air Force Institute of Technology Air

Sustainable Water Management & Satellite Remote Sensing

EPA Science Inventory

Eutrophication assessment frameworks such as the Australian National Water Quality Management Strategy, Oslo Paris (OSPAR) Commission Common Procedure, Water Framework Directive (WFD) of the European Union, Marine Strategy Framework Directive (MSFD) from the European Commission, ...

The Muon Conditions Data Management:. Database Architecture and Software Infrastructure

NASA Astrophysics Data System (ADS)

Verducci, Monica

2010-04-01

The management of the Muon Conditions Database will be one of the most challenging applications for Muon System, both in terms of data volumes and rates, but also in terms of the variety of data stored and their analysis. The Muon conditions database is responsible for almost all of the 'non-event' data and detector quality flags storage needed for debugging of the detector operations and for performing the reconstruction and the analysis. In particular for the early data, the knowledge of the detector performance, the corrections in term of efficiency and calibration will be extremely important for the correct reconstruction of the events. In this work, an overview of the entire Muon conditions database architecture is given, in particular the different sources of the data and the storage model used, including the database technology associated. Particular emphasis is given to the Data Quality chain: the flow of the data, the analysis and the final results are described. In addition, the description of the software interfaces used to access to the conditions data are reported, in particular, in the ATLAS Offline Reconstruction framework ATHENA environment.

The Mycotox Charter: Increasing Awareness of, and Concerted Action for, Minimizing Mycotoxin Exposure Worldwide

PubMed Central

Logrieco, Antonio F.; Eskola, Mari; Krska, Rudolf; Ayalew, Amare; Bhatnagar, Deepak; Chulze, Sofia; Li, Peiwu; Poapolathep, Amnart; Rahayu, Endang S.; Shephard, Gordon S.; Stepman, François; Zhang, Hao

2018-01-01

Mycotoxins are major food contaminants affecting global food security, especially in low and middle-income countries. The European Union (EU) funded project, MycoKey, focuses on “Integrated and innovative key actions for mycotoxin management in the food and feed chains” and the right to safe food through mycotoxin management strategies and regulation, which are fundamental to minimizing the unequal access to safe and sufficient food worldwide. As part of the MycoKey project, a Mycotoxin Charter (charter.mycokey.eu) was launched to share the need for global harmonization of mycotoxin legislation and policies and to minimize human and animal exposure worldwide, with particular attention to less developed countries that lack effective legislation. This document is in response to a demand that has built through previous European Framework Projects—MycoGlobe and MycoRed—in the previous decade to control and reduce mycotoxin contamination worldwide. All suppliers, participants and beneficiaries of the food supply chain, for example, farmers, consumers, stakeholders, researchers, members of civil society and government and so forth, are invited to sign this charter and to support this initiative. PMID:29617309

Smokeless Tobacco Supply Chain in South Asia: A Comparative Analysis Using the WHO Framework Convention on Tobacco Control.

PubMed

Siddiqi, Kamran; Scammell, Katy; Huque, Rumana; Khan, Amina; Baral, Sushil; Ali, Shehzad; Watt, Ian

2016-04-01

Most South Asian countries are signatories to the WHO Framework Convention for Tobacco Control (FCTC). However, there is little information on the extent to which FCTC standards are effectively implemented for controlling smokeless tobacco (SLT)-used by over 250 million people in the region. We assessed the feasibility of a novel approach based on interviewing the key actors of SLT supply chain and analyzing its findings using standards set by FCTC. Using a snowball-sampling technique, we interviewed point-of-sale vendors, wholesale retailers, manufacturers, raw-tobacco retailers, and farmers involved in the supply chain of SLT in Bangladesh, Nepal, and Pakistan. Using a structured-questionnaire, participants were asked about their customer profiles; product types; marketing practices; suppliers; profit margins, awareness and adherence to legislation. We recruited 72% (130/180) of all supply chain actors approached. Findings indicate several loopholes in the existing taxation, regulatory, and inspection systems. A significant proportion of smuggled and counterfeit SLT products are available in the market. Most SLT products are sold without recommended warnings, information on their ingredients, and manufacturers' details. There appear to be no restrictions on sale of SLT products to minors. On the other hand, there are also several incentives built-in the supply chain that makes tobacco farming, SLT manufacturing, and its sale a profitable business. Our novel approach to study SLT control was successful in identifying and interviewing actors involved in its supply chain. The analysis using FCTC could provide valuable information to policy makers and enable them to effectively regulate SLT products. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Normative and Descriptive Aspects of Management Education: Differentiation and Integration

ERIC Educational Resources Information Center

Meirovich, Gavriel

2015-01-01

This study advocates strongly for clear differentiation and synthesis of descriptive and normative approaches in management education. There is a certain isolation of normative and descriptive theoretical frameworks presented in management courses. Normative frameworks in management explain how organizations "should be" managed, while…

Strategic Issues in Quality Management: 1. Theoretical Considerations.

ERIC Educational Resources Information Center

Johannsen, Carl Gustav

1996-01-01

Examines the relationship between strategic management and quality management concepts in a library and information services setting. Conceptual frameworks are presented and a new strategic quality management framework, inspired by the Japanese policy deployment approach, is developed that also discusses total quality management. (Author/LRW)

Framework to assess the effects of using patient-reported outcome measures in chronic care management.

PubMed

Santana, Maria-Jose; Feeny, David

2014-06-01

The inclusion of patient-reported outcome measures (PROMs) in the routine clinical care of chronically ill patients has the potential to add valuable information about the impact of the disease and its treatment and promotes effective patient self-management in which patients become more active participants in their own care. PROMs provide clinicians with timely information on patients' symptoms as well as functional and emotional status. PROMs are a useful tool for enhancing patient-clinician communication. We develop a conceptual framework describing the potential effects of the use of PROMs in chronic care management. The framework summarizes insights from the methods for evaluating the clinical effectiveness and methods for the health technology assessment of diagnostic technologies and results from the relevant studies. The framework describes potential effects, from proximal to distal, including communication (patient-clinician, patient-relative, clinician-clinician, and clinician-relative), engaging patients in shared clinical decision making, patient management (clinician management and patient self-management), and patient outcomes. Important potential effects also include enhancement in patient activation as well as improvements in clinician and patient satisfaction, and patient adherence to recommended treatment. Previous frameworks have described patient-physician communication, patient satisfaction, and health outcomes. Our framework adds unique domains, including patient engagement, patient activation, shared clinical decision making, and patient self-management. The framework can be used as a tool to guide the development of interventions to improve chronic care management through the use of PROMs.

Product carbon footprint assessment supporting the green supply chain construction in household appliance manufacturers

NASA Astrophysics Data System (ADS)

Chen, Jianhua; Sun, Liang; Guo, Huiting

2017-11-01

Supply chain carbon emission is one of the factors considered in the green supply chain management. A method was designed to support the green supply chain measures based on the carbon footprint assessment for products. A research for 3 typical household appliances carbon footprint assessment was conducted to explore using product carbon footprint assessment method to guide the green supply chain management of the manufacturers. The result could reflect the differences directions on green supply chain management of manufacturers of washing machine, air conditioner and microwave, respectively That is, the washing machine manufacturer should pay attention to the low carbon activities in upstream suppliers in highest priority, and also the promotion of product energy efficiency. The air conditioner manufacturer should pay attention to the product energy efficiency increasing in highest priority, and the improvement of refrigerant to decrease its GWP. And the microwave manufacture could only focus on the energy efficiency increasing because it contributes most of the carbon emission to its carbon footprint. Besides, the representativeness of product and the applicability of the method were also discussed. As the manufacturer could master the technical information on raw material and components of its products to conduct the product carbon footprint assessment, this method could help the manufacturer to identify the effective green supply chain measures in the preliminary stage.

Modification of Side Chains of Conjugated Molecules and Polymers for Charge Mobility Enhancement and Sensing Functionality.

PubMed

Liu, Zitong; Zhang, Guanxin; Zhang, Deqing

2018-06-19

Organic semiconductors have received increasing attentions in recent years because of their promising applications in various optoelectronic devices. The key performance metric for organic semiconductors is charge carrier mobility, which is governed by the electronic structures of conjugated backbones and intermolecular/interchain π-π interactions and packing in both microscopic and macroscopic levels. For this reason, more efforts have been paid to the design and synthesis of conjugated frameworks for organic semiconductors with high charge mobilities. However, recent studies manifest that appropriate modifications of side chains that are linked to conjugated frameworks can improve the intermolecular/interchain packing order and boost charge mobilities. In this Account, we discuss our research results in context of modification of side chains in organic semiconductors for charge mobility enhancement. These include the following: (i) The lengths of alkyl chains in sulfur-rich thiepin-fused heteroacences can dramatically influence the intermolecular arrangements and orbital overlaps, ushering in different hole mobilities. Inversely, the lamellar stacking modes of alkyl chains in naphthalene diimide (NDI) derivatives with tetrathiafulvalene (TTF) units are affected by the structures of conjugated cores. (ii) The steric hindrances owing to the bulky branching chains can be weakened by partial replacement of the branching alkyl chains with linear ones for diketopyrrolopyrrole (DPP)-based D (donor)-A (acceptor) conjugated polymers. Such modification of side chains makes the polymer backbones more planar and thus interchain packing order and charge mobilities are improved. The incorporation of hydrophilic tri(ethylene glycol) (TEG) chains into the polymers also leads to improved interchain packing order. In particular, the polymer in which TEG side chains are distributed uniformly exhibits relatively high charge mobility without thermal annealing. (iii) The incorporation of urea groups in the side chains induces the polymer chains to pack more orderly and form large domains because of the additional H-bonding among urea groups. Accordingly, thin film mobilities of the conjugated D-A polymers with side chains entailing urea groups are largely boosted in comparison with those of polymers of the same backbones with either branching alkyl chains or branching/linear alkyl chains. (iv) The torsions of branching alkyl chains in conjugated D-A polymers can be inhibited to some extent upon incorporation of tiny amount of NMe 4 I in the thin film. As a result, the polymer thin films with NMe 4 I exhibit improved crystallinity, and charge mobilities can be boosted by more than 20 times. (v) Side chains with functional groups in the conjugated polymers can endow the thin film field-effect transistors (FETs) with sensing functionality. FETs with the conjugated polymer with -COOH groups in the side chains show sensitive, selective, and fast responses toward ammonia and amines, while FETs with the ultrathin films of the polymer containing tetra(ethylene glycol) (TEEG) in the side chains can sense alcohol vapors (in particular ethanol vapor) sensitively and selectively with fast response.

E3: Economy, Energy and Environment

EPA Pesticide Factsheets

E3 is a technical assistance framework helping communities, manufacturers, and manufacturing supply chains adapt and thrive in today's green economy. Find information on pollution prevention, sustainable business practices, and energy efficiency.

A New Activity-Based Financial Cost Management Method

NASA Astrophysics Data System (ADS)

Qingge, Zhang

The standard activity-based financial cost management model is a new model of financial cost management, which is on the basis of the standard cost system and the activity-based cost and integrates the advantages of the two. It is a new model of financial cost management with more accurate and more adequate cost information by taking the R&D expenses as the accounting starting point and after-sale service expenses as the terminal point and covering the whole producing and operating process and the whole activities chain and value chain aiming at serving the internal management and decision.

Designing a Supply Chain Management Academic Curriculum Using QFD and Benchmarking

ERIC Educational Resources Information Center

Gonzalez, Marvin E.; Quesada, Gioconda; Gourdin, Kent; Hartley, Mark

2008-01-01

Purpose: The purpose of this paper is to utilize quality function deployment (QFD), Benchmarking analyses and other innovative quality tools to develop a new customer-centered undergraduate curriculum in supply chain management (SCM). Design/methodology/approach: The researchers used potential employers as the source for data collection. Then,…

An Innovative Supply Chain Management Programme Structure: Broadening the SCM Skill Set

ERIC Educational Resources Information Center

Okongwu, Uche

2007-01-01

This paper proposes a matrix structure for training Supply Chain Management (SCM) professionals. It is an innovative programme structure that combines two approaches: cross-border and inter-organisational. It enables the students to comprehend complex and specific business environments and to understand the diverse nature of SCM systems in both…

Service-Learning in Supply Chain Management: Benefits, Challenges and Best Practices

ERIC Educational Resources Information Center

Schoenherr, Tobias

2015-01-01

Service-learning (SL) is a pedagogical approach in which students are assigned a course-related project in a not-for-profit organization, and are tasked to apply course content to execute the project. While the benefits are multifarious, only recently have supply chain management (SCM) courses adapted this innovative teaching methodology. The…

Using a Video Game to Teach Supply Chain and Logistics Management

ERIC Educational Resources Information Center

Liu, Chiung-Lin

2017-01-01

This study used OpenTTD, a video game that supports in-depth experiential learning, to evaluate undergraduate students' opinions regarding supply chain and logistics management learning. The 101 undergraduate participants were assigned to either an experimental group or a control group. From the post-test questionnaires, the analytical results…

78 FR 61828 - Fisheries of the Northeastern United States; Atlantic Herring Fishery; Framework Adjustment 2 and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-04

... Framework Adjustment 2 to the Atlantic Herring Fishery Management Plan (Framework 2) and the 2013-2015... New England Fishery Management Council (Council) to split annual catch limits seasonally for the four Atlantic herring management areas, and the carryover of unharvested catch, up to 10 percent for each area's...

An Assessment of External Organizational Marketing at Naval Aviation Depot (NADEP) North Island

DTIC Science & Technology

2005-12-01

organizational marketing. In his book "A Framework for Marketing Management," marketing expert Philip Kotler addresses marketing as it applies to...3 Kotler , Philip , A Framework for Marketing Management (Second Edition), Pearson Education, Inc...56 Kotler , Philip , A Framework for Marketing Management (Second Edition), Pearson Education, Inc. 2003. 64 strengthening its

Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective.

PubMed

Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can

2016-01-01

Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers.

Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective

PubMed Central

Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can

2016-01-01

Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers. PMID:26807848

Towards a Framework for Managing Risk Associated with Technology-Induced Error.

PubMed

Borycki, Elizabeth M; Kushniruk, Andre W

2017-01-01

Health information technologies (HIT) promised to streamline and modernize healthcare processes. However, a growing body of research has indicated that if such technologies are not designed, implemented or maintained properly this may lead to an increased incidence of new types of errors which the authors have referred to as "technology-induced errors". In this paper, framework is presented that can be used to manage HIT risk. The framework considers the reduction of technology-induced errors at different stages by managing risks associated with the implementation of HIT. Frameworks that allow health information technology managers to employ proactive and preventative approaches that can be used to manage the risks associated with technology-induced errors are critical to improving HIT safety and managing risk associated with implementing new technologies.

Assessment of RFID Investment in the Military Logistics Systems Through The Cost of Ownership Model (COO)

DTIC Science & Technology

2010-03-01

managers seek ways to increase the efficiency of their organizations by improving their logistics operations . According to Logistics Today journal ...S. (2009). RFID Adoption by Indian Retailers: An Exploratory Study. The Icfai University Journal of Supply Chain Management , 6 (1), 60-77...and will continue to be one of the hot topics in operations and supply chain management . It will potentially receive widespread adoption in the long

A review and framework for understanding the potential impact of poor solid waste management on health in developing countries.

PubMed

Ziraba, Abdhalah K; Haregu, Tilahun Nigatu; Mberu, Blessing

2016-01-01

The increase in solid waste generated per capita in Africa has not been accompanied by a commensurate growth in the capacity and funding to manage it. It is reported that less than 30% of urban waste in developing countries is collected and disposed appropriately. The implications of poorly managed waste on health are numerous and depend on the nature of the waste, individuals exposed, duration of exposure and availability of interventions for those exposed. To present a framework for understanding the linkages between poor solid waste management, exposure and associated adverse health outcomes. The framework will aid understanding of the relationships, interlinkages and identification of the potential points for intervention. Development of the framework was informed by a review of literature on solid waste management policies, practices and its impact on health in developing countries. A configurative synthesis of literature was applied to develop the framework. Several iterations of the framework were reviewed by experts in the field. Each linkage and outcomes are described in detail as outputs of this study. The resulting framework identifies groups of people at a heightened risk of exposure and the potential health consequences. Using the iceberg metaphor, the framework illustrates the pathways and potential burden of ill-health related to solid waste that is hidden but rapidly unfolding with our inaction. The existing evidence on the linkage between poor solid waste management and adverse health outcomes calls to action by all stakeholders in understanding, prioritizing, and addressing the issue of solid waste in our midst to ensure that our environment and health are preserved. A resulting framework developed in this study presents a clearer picture of the linkages between poor solid waste management and could guide research, policy and action.

System and methods of resource usage using an interoperable management framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heileman, Gregory L.; Jamkhedkar, Pramod A.; Lamb, Christopher C.

Generic rights expression language allowing interoperability across different computing environments including resource usage of different applications. A formal framework for usage management provides scaffolding upon which interoperable usage management systems can be built. Certain features of the framework are standardized, such as the operational semantics, including areas free of standards that necessitate choice and innovation to achieve a balance of flexibility and usability for interoperability in usage management systems.

Science framework for conservation and restoration of the sagebrush biome: Linking the Department of the Interior’s Integrated Rangeland Fire Management Strategy to long-term strategic conservation actions

Treesearch

J.C. Chambers; J.L. Beck; J.B. Bradford; J. Bybee; S. Campbell; J. Carlson; T.J. Christiansen; K.J. Clause; G. Collins; M.R. Crist; J.B. Dinkins; K.E. Doherty; F. Edwards; S. Espinosa; K.A. Griffin; P. Griffin; J.R. Haas; S.E. Hanser; D.W. Havlina; K.F. Henke; J.D. Hennig; L.A. Joyce; F.M. Kilkenny; S.M. Kulpa; L.L. Kurth; J.D. Maestas; M. Manning; K.E. Mayer; B.A. Mealor; C. McCarthy; M. Pellant; M.A. Perea; K.L. Prentice; D.A. Pyke; L.A. Wiechman; A. Wuenschel

2017-01-01

The Science Framework is intended to link the Department of the Interior’s Integrated Rangeland Fire Management Strategy with long-term strategic conservation actions in the sagebrush biome. The Science Framework provides a multiscale approach for prioritizing areas for management and determining effective management strategies within the sagebrush biome. The emphasis...

Internet-enabled collaborative agent-based supply chains

NASA Astrophysics Data System (ADS)

Shen, Weiming; Kremer, Rob; Norrie, Douglas H.

2000-12-01

This paper presents some results of our recent research work related to the development of a new Collaborative Agent System Architecture (CASA) and an Infrastructure for Collaborative Agent Systems (ICAS). Initially being proposed as a general architecture for Internet based collaborative agent systems (particularly complex industrial collaborative agent systems), the proposed architecture is very suitable for managing the Internet enabled complex supply chain for a large manufacturing enterprise. The general collaborative agent system architecture with the basic communication and cooperation services, domain independent components, prototypes and mechanisms are described. Benefits of implementing Internet enabled supply chains with the proposed infrastructure are discussed. A case study on Internet enabled supply chain management is presented.

Radio Frequency Identification Queuing & Geo-Location (RAQGEO): A spatial solution to inventory management at XYZ Logistics, Inc

NASA Astrophysics Data System (ADS)

Griffiths, Bradley Joseph

New supply chain management methods using radio frequency identification (RFID) and global positioning system (GPS) technology are quickly being adopted by companies as various inventory management benefits are being realized. For example, companies such as Nippon Yusen Kaisha (NYK) Logistics use the technology coupled with geospatial support systems for distributors to quickly find and manage freight containers. Traditional supply chain management methods require pen-to-paper reporting, searching inventory on foot, and human data entry. Some companies that prioritize supply chain management have not adopted the new technology, because they may feel that their traditional methods save the company expenses. This thesis serves as a pilot study that examines how information technology (IT) utilizing RFID and GPS technology can serve to increase workplace productivity, decrease human labor associated with inventorying, plus be used for spatial analysis by management. This pilot study represents the first attempt to couple RFID technology with Geographic Information Systems (GIS) in supply chain management efforts to analyze and locate mobile assets by exploring costs and benefits of implementation plus how the technology can be employed. This pilot study identified a candidate to implement a new inventory management method as XYZ Logistics, Inc. XYZ Logistics, Inc. is a fictitious company but represents a factual corporation. The name has been changed to provide the company with anonymity and to not disclose confidential business information. XYZ Logistics, Inc., is a nation-wide company that specializes in providing space solutions for customers including portable offices, storage containers, and customizable buildings.

Decision support frameworks and tools for conservation

USGS Publications Warehouse

Schwartz, Mark W.; Cook, Carly N.; Pressey, Robert L.; Pullin, Andrew S.; Runge, Michael C.; Salafsky, Nick; Sutherland, William J.; Williamson, Matthew A.

2018-01-01

The practice of conservation occurs within complex socioecological systems fraught with challenges that require transparent, defensible, and often socially engaged project planning and management. Planning and decision support frameworks are designed to help conservation practitioners increase planning rigor, project accountability, stakeholder participation, transparency in decisions, and learning. We describe and contrast five common frameworks within the context of six fundamental questions (why, who, what, where, when, how) at each of three planning stages of adaptive management (project scoping, operational planning, learning). We demonstrate that decision support frameworks provide varied and extensive tools for conservation planning and management. However, using any framework in isolation risks diminishing potential benefits since no one framework covers the full spectrum of potential conservation planning and decision challenges. We describe two case studies that have effectively deployed tools from across conservation frameworks to improve conservation actions and outcomes. Attention to the critical questions for conservation project planning should allow practitioners to operate within any framework and adapt tools to suit their specific management context. We call on conservation researchers and practitioners to regularly use decision support tools as standard practice for framing both practice and research.

Framework for resilience in material supply chains, with a case study from the 2010 Rare Earth Crisis.

PubMed

Sprecher, Benjamin; Daigo, Ichiro; Murakami, Shinsuke; Kleijn, Rene; Vos, Matthijs; Kramer, Gert Jan

2015-06-02

In 2010, Chinese export restrictions caused the price of the rare earth element neodymium to increase by a factor of 10, only to return to almost normal levels in the following months. This despite the fact that the restrictions were not lifted. The significant price peak shows that this material supply chain was only weakly resistant to a major supply disruption. However, the fact that prices rapidly returned to lower levels implies a certain resilience. With the help of a novel approach, based on resilience theory combined with a material flow analysis (MFA) based representation of the neodymium magnet (NdFeB) supply chain, we show that supply chain resilience is composed of various mechanisms, including (a) resistance, (b) rapidity, and (c) flexibility, that originate from different parts of the supply chain. We make recommendations to improve the capacity of the NdFeB system to deal with future disruptions and discuss potential generalities for the resilience of other material supply chains.

Geospatial decision support framework for critical infrastructure interdependency assessment

NASA Astrophysics Data System (ADS)

Shih, Chung Yan

Critical infrastructures, such as telecommunications, energy, banking and finance, transportation, water systems and emergency services are the foundations of modern society. There is a heavy dependence on critical infrastructures at multiple levels within the supply chain of any good or service. Any disruptions in the supply chain may cause profound cascading effect to other critical infrastructures. A 1997 report by the President's Commission on Critical Infrastructure Protection states that a serious interruption in freight rail service would bring the coal mining industry to a halt within approximately two weeks and the availability of electric power could be reduced in a matter of one to two months. Therefore, this research aimed at representing and assessing the interdependencies between coal supply, transportation and energy production. A proposed geospatial decision support framework was established and applied to analyze interdependency related disruption impact. By utilizing the data warehousing approach, geospatial and non-geospatial data were retrieved, integrated and analyzed based on the transportation model and geospatial disruption analysis developed in the research. The results showed that by utilizing this framework, disruption impacts can be estimated at various levels (e.g., power plant, county, state, etc.) for preventative or emergency response efforts. The information derived from the framework can be used for data mining analysis (e.g., assessing transportation mode usages; finding alternative coal suppliers, etc.).

Conjugated organic framework with three-dimensionally ordered stable structure and delocalized π clouds

NASA Astrophysics Data System (ADS)

Guo, Jia; Xu, Yanhong; Jin, Shangbin; Chen, Long; Kaji, Toshihiko; Honsho, Yoshihito; Addicoat, Matthew A.; Kim, Jangbae; Saeki, Akinori; Ihee, Hyotcherl; Seki, Shu; Irle, Stephan; Hiramoto, Masahiro; Gao, Jia; Jiang, Donglin

2013-11-01

Covalent organic frameworks are a class of crystalline organic porous materials that can utilize π-π-stacking interactions as a driving force for the crystallization of polygonal sheets to form layered frameworks and ordered pores. However, typical examples are chemically unstable and lack intrasheet π-conjugation, thereby significantly limiting their applications. Here we report a chemically stable, electronically conjugated organic framework with topologically designed wire frameworks and open nanochannels, in which the π conjugation-spans the two-dimensional sheets. Our framework permits inborn periodic ordering of conjugated chains in all three dimensions and exhibits a striking combination of properties: chemical stability, extended π-delocalization, ability to host guest molecules and hole mobility. We show that the π-conjugated organic framework is useful for high on-off ratio photoswitches and photovoltaic cells. Therefore, this strategy may constitute a step towards realizing ordered semiconducting porous materials for innovations based on two-dimensionally extended π systems.

Multinuclear metal-binding ability of a carotene

PubMed Central

Horiuchi, Shinnosuke; Tachibana, Yuki; Yamashita, Mitsuki; Yamamoto, Koji; Masai, Kohei; Takase, Kohei; Matsutani, Teruo; Kawamata, Shiori; Kurashige, Yuki; Yanai, Takeshi; Murahashi, Tetsuro

2015-01-01

Carotenes are naturally abundant unsaturated hydrocarbon pigments, and their fascinating physical and chemical properties have been studied intensively not only for better understanding of the roles in biological processes but also for the use in artificial chemical systems. However, their metal-binding ability has been virtually unexplored. Here we report that β-carotene has the ability to assemble and align ten metal atoms to afford decanuclear homo- and heterometal chain complexes. The metallo–carotenoid framework shows reversible metalation–demetalation reactivity with multiple metals, which allows us to control the size of metal chains as well as the heterobimetallic composition and arrangement of the carotene-supported metal chains. PMID:25857402

Research on Duplication Dynamics and Evolutionary Stable of Reverse Supply Chain

NASA Astrophysics Data System (ADS)

Huizhong, Dong; Hongli, Song

An evolutionary game model of Reverse Supply Chain(RSC) is established based on duplication dynamics function and evolutionary stable strategy. Using the model framework, this paper provides insights into a deeper understanding on how each supplier make strategic decision independently in reverse supply chain to determine their performance. The main conclusion is as follow: Under the market mechanism, not unless the extra income derived from the implementation of RSC exceeds zero point would the suppliers implement RSC strategy. When those suppliers are passive to RSC, the effective solution is that the government takes macro-control measures, for example, to force those suppliers implement RSC through punishment mechanism.

Synconset Waves and Chains: Spiking Onsets in Synchronous Populations Predict and Are Predicted by Network Structure

PubMed Central

Raghavan, Mohan; Amrutur, Bharadwaj; Narayanan, Rishikesh; Sikdar, Sujit Kumar

2013-01-01

Synfire waves are propagating spike packets in synfire chains, which are feedforward chains embedded in random networks. Although synfire waves have proved to be effective quantification for network activity with clear relations to network structure, their utilities are largely limited to feedforward networks with low background activity. To overcome these shortcomings, we describe a novel generalisation of synfire waves, and define ‘synconset wave’ as a cascade of first spikes within a synchronisation event. Synconset waves would occur in ‘synconset chains’, which are feedforward chains embedded in possibly heavily recurrent networks with heavy background activity. We probed the utility of synconset waves using simulation of single compartment neuron network models with biophysically realistic conductances, and demonstrated that the spread of synconset waves directly follows from the network connectivity matrix and is modulated by top-down inputs and the resultant oscillations. Such synconset profiles lend intuitive insights into network organisation in terms of connection probabilities between various network regions rather than an adjacency matrix. To test this intuition, we develop a Bayesian likelihood function that quantifies the probability that an observed synfire wave was caused by a given network. Further, we demonstrate it's utility in the inverse problem of identifying the network that caused a given synfire wave. This method was effective even in highly subsampled networks where only a small subset of neurons were accessible, thus showing it's utility in experimental estimation of connectomes in real neuronal-networks. Together, we propose synconset chains/waves as an effective framework for understanding the impact of network structure on function, and as a step towards developing physiology-driven network identification methods. Finally, as synconset chains extend the utilities of synfire chains to arbitrary networks, we suggest utilities of our framework to several aspects of network physiology including cell assemblies, population codes, and oscillatory synchrony. PMID:24116018

Pillared-layer microporous metal-organic frameworks constructed by robust hydrogen bonds. Synthesis, characterization, and magnetic and adsorption properties of 2,2'-biimidazole and carboxylate complexes.

PubMed

Ding, Bing-Bing; Weng, Yan-Qin; Mao, Zong-Wan; Lam, Chi-Keung; Chen, Xiao-Ming; Ye, Bao-Hui

2005-11-28

Two new isostructural complexes [M(H2biim)3][M(btc)(Hbiim)].2H2O (M = Co, (1); M = Ni, (2)) (btc = 1,3,5-benzenetricarboxylate; H2biim = 2,2'-biimidazole) have been synthesized and characterized by single-crystal X-ray diffraction. They present a unique structure consisting of two distinct units: the monomeric cations [M(H2biim)3]2+ and the two-dimensional (2D) anionic polymer [M(Hbiim)(btc)]2-. In the anionic moiety, the Hbiim- monoanion is simultaneously coordinated to one metal atom in a bidentate mode and further to another metal atom in a monodentate mode. The imidazolate groups bridge the two adjacent metal ions into a helical chain which is further arranged in left- and right-handed manners. These chains are bridged by btc ligands into a 2D brick wall structure. The most interesting aspect is that the [M(H2biim)3]2+ cations act as pillars and link the anionic layers via robust heteromeric hydrogen-bonded synthons (9) and (7) formed by the uncoordinated oxygen atoms of carboxylate groups and the H2biim ligands, resulting in a microporous metal-organic framework with one-dimensional (1D) channels (ca. 11.85 angstroms x 11.85 angstroms for 1 and 11.43 angstroms x 11.43 angstroms for 2). Magnetic properties of these two complexes have also been studied in the temperature range of 2-300 K, and their magnetic susceptibilities obey the Curie-Weiss law in the temperature range of 20-300 K (for 1) and 2-300 K (for 2), respectively, showing anti-ferromagnetic coupling through imidazolate bridging. Taking into consideration the Heisenberg infinite chain model as well as the possibility of chain-to-chain and chain-to-cation interactions, the anti-ferromagnetic exchange of 2 is analyzed via a correction for the molecular field, giving the values of g(cat) = 2.296, g(Ni) = 2.564, J = -13.30 cm(-1), and zJ' = -0.017 cm(-1). The microporous frameworks are stable at ca. 350 degrees C. They do not collapse after removal of the guest water molecules in the channels, and they adsorb methanol molecules selectively.

A Framework for Lab Work Management in Mass Courses. Application to Low Level Input/Output without Hardware

ERIC Educational Resources Information Center

Rodriguez, Santiago; Zamorano, Juan; Rosales, Francisco; Dopico, Antonio Garcia; Pedraza, Jose Luis

2007-01-01

This paper describes a complete lab work management framework designed and developed in the authors' department to help teachers to manage the small projects that students are expected to complete as lab assignments during their graduate-level computer engineering studies. The paper focuses on an application example of the framework to a specific…

Making Supply Chains Resilient to Floods Using a Bayesian Network

NASA Astrophysics Data System (ADS)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and volume), and data from previous experiences (i.e. companies' risk mitigation strategy decisions).

76 FR 69755 - National Disaster Recovery Framework (NDRF)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2010-0004] National Disaster Recovery Framework (NDRF) AGENCY: Federal Emergency Management Agency, DHS. ACTION... Framework (NRF) to provide organizing constructs and principles solely focused on disaster recovery...

Challenges in scaling up biofuels infrastructure.

PubMed

Richard, Tom L

2010-08-13

Rapid growth in demand for lignocellulosic bioenergy will require major changes in supply chain infrastructure. Even with densification and preprocessing, transport volumes by mid-century are likely to exceed the combined capacity of current agricultural and energy supply chains, including grain, petroleum, and coal. Efficient supply chains can be achieved through decentralized conversion processes that facilitate local sourcing, satellite preprocessing and densification for long-distance transport, and business models that reward biomass growers both nearby and afar. Integrated systems that are cost-effective and energy-efficient will require new ways of thinking about agriculture, energy infrastructure, and rural economic development. Implementing these integrated systems will require innovation and investment in novel technologies, efficient value chains, and socioeconomic and policy frameworks; all are needed to support an expanded biofuels infrastructure that can meet the challenges of scale.

New framework of NGN web-based management system

NASA Astrophysics Data System (ADS)

Nian, Zhou; Jie, Yin; Qian, Mao

2007-11-01

This paper introduces the basic conceptions and key technology of the Ajax and some popular frameworks in the J2EE architecture, try to integrate all the frameworks into a new framework. The developers can develop web applications much more convenient by using this framework and the web application can provide a more friendly and interactive platform to the end users. At last an example is given to explain how to use the new framework to build a web-based management system of the softswitch network.

A comparison of the legal frameworks supporting water management in Europe and China.

PubMed

Yang, X; Griffiths, I M

2010-01-01

This paper has compared the legal frameworks supporting water management in Europe and China, with special focus on integrated river basin management (IRBM) to identify synergies and opportunities in policymaking and implementation. The research shows that China has committed to the efficient management of water resources through various policy tools during the current period. This commitment, however, has often been interrupted and distorted by politics, resulting in the neglect of socioeconomic and environmental priorities. The European legal framework supporting water management underwent a complex and lengthy development, but with the adoption of the Water Framework Directive provides a policy model on which to develop an integrated and sustainable approach to river basin management, elements of which may help to meet the demands of the emerging 21st century Chinese society on these critical natural resources.

Strengthening community health supply chain performance through an integrated approach: Using mHealth technology and multilevel teams in Malawi.

PubMed

Shieshia, Mildred; Noel, Megan; Andersson, Sarah; Felling, Barbara; Alva, Soumya; Agarwal, Smisha; Lefevre, Amnesty; Misomali, Amos; Chimphanga, Boniface; Nsona, Humphreys; Chandani, Yasmin

2014-12-01

In 2010, 7.6 million children under five died globally - largely due to preventable diseases. Majority of these deaths occurred in sub-Saharan Africa. As a strategy to reduce child mortality, the Government of Malawi, in 2008, initiated integrated community case management allowing health surveillance assistants (HSAs) to treat sick children in communities. Malawi however, faces health infrastructure challenges, including weak supply chain systems leading to low product availability. A baseline assessment conducted in 2010 identified data visibility, transport and motivation of HSAs as challenges to continuous product availability. The project designed a mHealth tool as part of two interventions to address these challenges. A mobile health (mHealth) technology - cStock, for reporting on community stock data - was designed and implemented as an integral component of Enhanced Management (EM) and Efficient Product Transport (EPT) interventions. We developed a feasibility and acceptability framework to evaluate the effectiveness and predict the likelihood of scalability and ownership of the interventions. Mixed methods were used to conduct baseline and follow up assessments in May 2010 and February 2013, respectively. Routine monitoring data on community stock level reports, from cStock, were used to analyze supply chain performance over 18-month period in the intervention groups. Mean stock reporting rate by HSAs was 94% in EM group (n = 393) and 79% in EPT group (n = 253); mean reporting completeness was 85% and 65%, respectively. Lead time for HSA drug resupply over the 18-month period was, on average, 12.8 days in EM and 26.4 days in EPT, and mean stock out rate for 6 tracer products was significantly lower in EM compared to EPT group. Results demonstrate that cStock was feasible and acceptable to test users in Malawi, and that based on comparison with the EPT group, the team component of the EM group was an essential pairing with cStock to achieve the best possible supply chain performance and supply reliability. Establishing multi-level teams serves to connect HSAs with decision makers at higher levels of the health system, align objectives, clarify roles and promote trust and collaboration, thereby promoting country ownership and scalability of a cStock-like system.

Workshop Summary Proceedings Document: G7 Alliance on Resource Efficiency: U.S.-hosted Workshop on the Use of Life Cycle Concepts in Supply Chain Management to Achieve Resource Efficiency

EPA Pesticide Factsheets

This proceedings document summarizes prepared remarks, presentations and discussions from the G7 Alliance on Resource Efficiency: U.S.-hosted Workshop on the Use of Life Cycle Concepts in Supply Chain Management to Achieve Resource Efficiency.

78 FR 25416 - Information Collection Request: Web-Based Supply Chain Management Commodity Offer Forms

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-01

... Request: Web-Based Supply Chain Management Commodity Offer Forms AGENCY: Farm Service Agency and Commodity..., and yearly bases. Special invitations, however, are issued throughout the month. Web-Based Supply... will be posted to the FSA Web site and also to the WBSCM portal and FedBizOpps ( https://www.fbo.gov...

Animated Powerpoint Presentations for Teaching Operations and Supply Chain Management: Perceived Value and Electronic Exchange of Files

ERIC Educational Resources Information Center

Treleven, Mark D.; Penlesky, Richard J.; Callarman, Thomas E.; Watts, Charles A.; Bragg, Daniel J.

2012-01-01

This paper presents the innovation of sharing animated PowerPoint presentations used in teaching operations and supply chain management techniques and concepts through an international electronic exchange. The plan for the exchange is presented and discussed. The potential benefits to faculty and students of using PowerPoint animations in…

Sustaining Higher Education Using Wal-Mart's Best Supply Chain Management Practices

ERIC Educational Resources Information Center

Comm, Clare L.; Mathaisel, Dennis F. X.

2008-01-01

Purpose: The costs in higher education are increasing and need to be controlled. This paper aims to demonstrate what lessons higher education could learn from Wal-Mart's reasons for its financial success with its focus on efficient and effective supply chain management (SCM) best practices. Design/methodology/approach: Wal-Mart's best practices in…

Data Science in Supply Chain Management: Data-Related Influences on Demand Planning

ERIC Educational Resources Information Center

Jin, Yao

2013-01-01

Data-driven decisions have become an important aspect of supply chain management. Demand planners are tasked with analyzing volumes of data that are being collected at a torrential pace from myriad sources in order to translate them into actionable business intelligence. In particular, demand volatilities and planning are vital for effective and…

The Role of Multi-Institutional Partnerships in Supply Chain Management Course Design and Improvement

ERIC Educational Resources Information Center

Long, Suzanna; Moos, J. Chris; Radic, Anne Bartel

2012-01-01

The authors examined the skills achieved through a multicultural, virtual student project environment among 3 supply chain management courses. The partnership included 2 universities in the United States and 1 in France and created virtual teams of students across university lines and is presented as a case study. The case includes detailed…

International Supply Chain Management Courses: Semester-Long versus Study-Abroad Formats

ERIC Educational Resources Information Center

Drake, Matthew J.; Luchs, Ryan J.; Mawhinney, John R.

2015-01-01

Short-term study-abroad programs are gaining in popularity at business schools around the United States. We discuss the innovative 4-week program we have developed at Duquesne University where we offer two three-credit, required business core courses. In particular, we focus on the structure of a 2-week core supply chain management course. By…

Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

NASA Astrophysics Data System (ADS)

Laakmann, Frank

The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

Evaluating the green practice of food service supply chain management based on fuzzy DEMATEL-ANP model

NASA Astrophysics Data System (ADS)

Li, Xiaoying; Zhu, Qinghua

2017-01-01

The question on how to evaluate a company's green practice has recently become a key strategic consideration for the food service supply chain management. This paper proposed a novel hybrid model that combines a fuzzy Decision Making Trial And Evaluation Laboratory(DEMATEL) and Analysis Network Process(ANP) methods, which developed the green restaurant criteria and demonstrated the complicated relations among various criteria to help the food service operation to better analyze the real-world situation and determine the different weight value of the criteria .The analysis of the evaluation of green practices will help the food service operation to be clear about the key measures of green practice to improve supply chain management.

Voluntary medical male circumcision: logistics, commodities, and waste management requirements for scale-up of services.

PubMed

Edgil, Dianna; Stankard, Petra; Forsythe, Steven; Rech, Dino; Chrouser, Kristin; Adamu, Tigistu; Sakallah, Sameer; Thomas, Anne Goldzier; Albertini, Jennifer; Stanton, David; Dickson, Kim Eva; Njeuhmeli, Emmanuel

2011-11-01

The global HIV prevention community is implementing voluntary medical male circumcision (VMMC) programs across eastern and southern Africa, with a goal of reaching 80% coverage in adult males by 2015. Successful implementation will depend on the accessibility of commodities essential for VMMC programming and the appropriate allocation of resources to support the VMMC supply chain. For this, the United States President's Emergency Plan for AIDS Relief, in collaboration with the World Health Organization and the Joint United Nations Programme on HIV/AIDS, has developed a standard list of commodities for VMMC programs. This list of commodities was used to inform program planning for a 1-y program to circumcise 152,000 adult men in Swaziland. During this process, additional key commodities were identified, expanding the standard list to include commodities for waste management, HIV counseling and testing, and the treatment of sexually transmitted infections. The approximate costs for the procurement of commodities, management of a supply chain, and waste disposal, were determined for the VMMC program in Swaziland using current market prices of goods and services. Previous costing studies of VMMC programs did not capture supply chain costs, nor the full range of commodities needed for VMMC program implementation or waste management. Our calculations indicate that depending upon the volume of services provided, supply chain and waste management, including commodities and associated labor, contribute between US$58.92 and US$73.57 to the cost of performing one adult male circumcision in Swaziland. Experience with the VMMC program in Swaziland indicates that supply chain and waste management add approximately US$60 per circumcision, nearly doubling the total per procedure cost estimated previously; these additional costs are used to inform the estimate of per procedure costs modeled by Njeuhmeli et al. in "Voluntary Medical Male Circumcision: Modeling the Impact and Cost of Expanding Male Circumcision for HIV Prevention in Eastern and Southern Africa." Program planners and policy makers should consider the significant contribution of supply chain and waste management to VMMC program costs as they determine future resource needs for VMMC programs.

High-Resolution Water Footprints of Production of the United States

NASA Astrophysics Data System (ADS)

Marston, Landon; Ao, Yufei; Konar, Megan; Mekonnen, Mesfin M.; Hoekstra, Arjen Y.

2018-03-01

The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United States. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the U.S. economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking. In fact, we find that 94% of U.S. industries could reduce their total water footprint more by sourcing from more water-efficient suppliers in their supply chain than they could by converting their own operations to be more water-efficient.

[Success factors in the German healthcare market. Hospitals between cluster formation and privatisation].

PubMed

Schmidt, C; Möller, J; Hardt, F; Gabbert, T; Bauer, M

2007-12-01

The German hospital market is in a state of transition due to the introduction of diagnosis-related groups (DRGs) and a constant change of the reimbursement, demographic, economical and technical framework. To date mainly public hospitals were bought by private hospital chains, but this trend has currently reached university hospitals. During recent months a consolidation within the market of private hospitals took place, while new market players such as foreign hospital chains, US universities and private equity firms emerged on the scene. The target of the privatisation process, however, turns more and more to larger hospitals. Central key values remain the cluster formation and centralisation of key competences such as food supply, purchasing and pharmacy. Within a network of clinics the representation of different care components (basic, regular and maximum care provider) and care levels (low, normal, intermediate and intensive care) remain important elements of efficient hospital management. Today, successful hospital operation is based on the successful competition for patients and even more for qualified staff. In this aspect, university hospitals could play a decisive role, because of their combination of maximum acute care provision and educational mandate. No such network has yet been formed due to the different interests of the owners, however, given the new market situation this alternative concept could become more attractive.

Measurement in Service Businesses: Challenges and Future Directions

NASA Astrophysics Data System (ADS)

Tyagi, Rajesh Kumar

This chapter presents challenges faced by service businesses while implementing a measurement system. A review of existing frameworks is presented and a new framework, the Service Scorecard, is introduced. The Service Scorecard is an adaptation of the Six Sigma Business Scorecard for the service sector. The framework has also been influenced by existing frameworks such as the Malcom Baldrige award criteria, the Balanced Scorecard, the European Quality award and the Service Profit Chain model. The seven elements of the Service Scorecard are Growth, Leadership, Acceleration, Collaboration, Innovation, Execution, and Retention. The examples of measurement systems are presented with concrete real-world case examples. Final thoughts and the challenges faced are also presented.

Growth of nanostructures with controlled diameter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pfefferle, Lisa; Haller, Gary; Ciuparu, Dragos

2009-02-03

Transition metal-substituted MCM-41 framework structures with a high degree of structural order and a narrow pore diameter distribution were reproducibly synthesized by a hydrothermal method using a surfactant and an anti-foaming agent. The pore size and the mesoporous volume depend linearly on the surfactant chain length. The transition metals, such as cobalt, are incorporated substitutionally and highly dispersed in the silica framework. Single wall carbon nanotubes with a narrow diameter distribution that correlates with the pore diameter of the catalytic framework structure were prepared by a Boudouard reaction. Nanostructures with a specified diameter or cross-sectional area can therefore be predictablymore » prepared by selecting a suitable pore size of the framework structure.« less

Proactive Supply Chain Performance Management with Predictive Analytics

PubMed Central

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment. PMID:25386605

Proactive supply chain performance management with predictive analytics.

PubMed

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.

The Strategic Management of Accountability in Nonprofit Organizations: An Analytical Framework.

ERIC Educational Resources Information Center

Kearns, Kevin P.

1994-01-01

Offers a framework stressing the strategic and tactical choices facing nonprofit organizations and discusses policy and management implications. Claims framework is a useful tool for conducting accountability audits and conceptual foundation for discussions of public policy. (Author/JOW)

Community, autonomy and bespoke services: Independent community pharmacy practice in hyperdiverse, London communities.

PubMed

Duckett, Kathryn

2015-01-01

The landscape of pharmacy continues to evolve including in Great Britain, where, by 2012, almost 50% of pharmacy contracts were held by just 9 national chains. To further explicate the concept of 'independence' as it was positioned by independent pharmacists, particularly examining personal interpretations of their role in contemporary pharmacy and health care delivery. Research was situated in East and South-east London between 2008 and 2009. The study took an ethnographic approach; combining participant observation within 7 pharmacies and 36 active interviews with pharmacists. Recruitment criteria demanded that pharmacists self-identified as independent and were either owners or managers in sole-owned or independent chain pharmacies. Independence was expressed through a framework of three overarching themes: autonomy, engagement and bespoke practice. Autonomy formed the basis of professional expression ultimately enabling pharmacists to exercise control over customer relationships. This facilitated engagement with communities and individuals and ultimately made possible an offering of a bespoke 'personal' service. The diverse urban environment was a space where independence was seen to be of particular value. The complexity of this setting was used symbolically to support the need for independent thinking. These themes are examined through stories of 'acceptance' and developing pharmacy 'communities' alongside the practise of maintaining personal relationships to provide a distinct service offer. This study highlights distinct 'independent' expression of professional identity and suggests the need to assess the value of independent community pharmacy as being different from but complementary to the service provided by multiples/large chains. Copyright © 2015 Elsevier Inc. All rights reserved.

The Hotspot for (Global) One Health in Primary Food Production: Aflatoxin M1 in Dairy Products.

PubMed

Frazzoli, Chiara; Gherardi, Paola; Saxena, Navneet; Belluzzi, Giancarlo; Mantovani, Alberto

2016-01-01

One Health involves the multifaceted environment-animal-human web: nevertheless, the role of toxicological issues has yet to be fully explored in this context. Aflatoxin B1 (AFB1) contamination of feeds is a risk for the health of several farm animals, including fishes; milk is the only food of animal origin where a significant feed-food carry over may occur. The main AFB1-related compound present in milk is the hydroxy-metabolite aflatoxin M1 (AFM1). Besides contamination of raw milk, AFM1 is of concern for the whole dairy chain; AFM1 may also contaminate the milk of several other ruminants used for milk/dairy production. In a One Health perspective, milk represents a sentinel matrix for AFB1 vulnerability of the agro-food system, that is crucial in a phase when food/nutritional security becomes a global issue and climatic changes may affect agricultural productions. In the global setting, food chain exposure to long-term toxicants, such as AFM1, is a growing concern for economically developing countries, whereas global trade and climatic change makes AFM1 an emerging hot issue in economically developed countries as well. We critically review the state of the art on AFM1 risk assessment and risk management using two scenarios as case studies: a European Union country where the health system aims at ensuring a high-level protection of food chain (Italy) and the world's largest (and economically developing) producer of dairy products by volume (India). The case studies are used to provide building blocks for a global One Health framework.

Analysis of Management Practices in Lagos State Tertiary Institutions through Total Quality Management Structural Framework

ERIC Educational Resources Information Center

AbdulAzeez, Abbas Tunde

2016-01-01

This research investigated total quality management practices and quality teacher education in public tertiary institutions in Lagos State. The study was therefore designed to analyse management practices in Lagos state tertiary institutions through total quality management structural framework. The selected public tertiary institutions in Lagos…

Application of the BRAFO-tiered approach for benefit-risk assessment to case studies on natural foods.

PubMed

Watzl, Bernhard; Gelencsér, Eva; Hoekstra, Jeljer; Kulling, Sabine; Lydeking-Olsen, Eva; Rowland, Ian; Schilter, Benoît; van Klaveren, Jakob; Chiodini, Alessandro

2012-11-01

There is evidence that consumption of fish, especially oily fish, has substantial beneficial effects on health. In particular an inverse relationship of oily fish intake to coronary heart disease incidence has been established. These beneficial effects are ascribed to fish oil components including long chain ω-3 polyunsaturated fatty acids. On the other hand it should be noted that oily fish also contains hazardous substances such as dioxins, PCBs and methylmercury. Soy consumption has been associated with potential beneficial and adverse effects. The claimed benefits include reduced risk of cardiovascular disease; osteoporosis, breast and prostate cancer whereas potential adverse effects include impaired thyroid function, disruption of sex hormone levels, changes in reproductive function and increased breast cancer risk The two cases of natural foods highlight the need to consider both risks and benefits in order to establish the net health impact associated to the consumption of specific food products. Within the Sixth Framework programme of the European Commission, the BRAFO project was funded to develop a framework that allows for the quantitative comparison of human health risks and benefits in relation to foods and food compounds. This paper describes the application of the developed framework to two natural foods, farmed salmon and soy protein. We conclude that the BRAFO methodology is highly applicable to natural foods. It will help the benefit-risk managers in selecting the appropriate dietary recommendations for the population. Copyright © 2011 ILSI Europe. Published by Elsevier Ltd.. All rights reserved.

Research and Design of the Three-tier Distributed Network Management System Based on COM / COM + and DNA

NASA Astrophysics Data System (ADS)

Liang, Likai; Bi, Yushen

Considered on the distributed network management system's demand of high distributives, extensibility and reusability, a framework model of Three-tier distributed network management system based on COM/COM+ and DNA is proposed, which adopts software component technology and N-tier application software framework design idea. We also give the concrete design plan of each layer of this model. Finally, we discuss the internal running process of each layer in the distributed network management system's framework model.

The Application of SNiPER to the JUNO Simulation

NASA Astrophysics Data System (ADS)

Lin, Tao; Zou, Jiaheng; Li, Weidong; Deng, Ziyan; Fang, Xiao; Cao, Guofu; Huang, Xingtao; You, Zhengyun; JUNO Collaboration

2017-10-01

The JUNO (Jiangmen Underground Neutrino Observatory) is a multipurpose neutrino experiment which is designed to determine neutrino mass hierarchy and precisely measure oscillation parameters. As one of the important systems, the JUNO offline software is being developed using the SNiPER software. In this proceeding, we focus on the requirements of JUNO simulation and present the working solution based on the SNiPER. The JUNO simulation framework is in charge of managing event data, detector geometries and materials, physics processes, simulation truth information etc. It glues physics generator, detector simulation and electronics simulation modules together to achieve a full simulation chain. In the implementation of the framework, many attractive characteristics of the SNiPER have been used, such as dynamic loading, flexible flow control, multiple event management and Python binding. Furthermore, additional efforts have been made to make both detector and electronics simulation flexible enough to accommodate and optimize different detector designs. For the Geant4-based detector simulation, each sub-detector component is implemented as a SNiPER tool which is a dynamically loadable and configurable plugin. So it is possible to select the detector configuration at runtime. The framework provides the event loop to drive the detector simulation and interacts with the Geant4 which is implemented as a passive service. All levels of user actions are wrapped into different customizable tools, so that user functions can be easily extended by just adding new tools. The electronics simulation has been implemented by following an event driven scheme. The SNiPER task component is used to simulate data processing steps in the electronics modules. The electronics and trigger are synchronized by triggered events containing possible physics signals. The JUNO simulation software has been released and is being used by the JUNO collaboration to do detector design optimization, event reconstruction algorithm development and physics sensitivity studies.

The OGC Sensor Web Enablement framework

NASA Astrophysics Data System (ADS)

Cox, S. J.; Botts, M.

2006-12-01

Sensor observations are at the core of natural sciences. Improvements in data-sharing technologies offer the promise of much greater utilisation of observational data. A key to this is interoperable data standards. The Open Geospatial Consortium's (OGC) Sensor Web Enablement initiative (SWE) is developing open standards for web interfaces for the discovery, exchange and processing of sensor observations, and tasking of sensor systems. The goal is to support the construction of complex sensor applications through real-time composition of service chains from standard components. The framework is based around a suite of standard interfaces, and standard encodings for the message transferred between services. The SWE interfaces include: Sensor Observation Service (SOS)-parameterized observation requests (by observation time, feature of interest, property, sensor); Sensor Planning Service (SPS)-tasking a sensor- system to undertake future observations; Sensor Alert Service (SAS)-subscription to an alert, usually triggered by a sensor result exceeding some value. The interface design generally follows the pattern established in the OGC Web Map Service (WMS) and Web Feature Service (WFS) interfaces, where the interaction between a client and service follows a standard sequence of requests and responses. The first obtains a general description of the service capabilities, followed by obtaining detail required to formulate a data request, and finally a request for a data instance or stream. These may be implemented in a stateless "REST" idiom, or using conventional "web-services" (SOAP) messaging. In a deployed system, the SWE interfaces are supplemented by Catalogue, data (WFS) and portrayal (WMS) services, as well as authentication and rights management. The standard SWE data formats are Observations and Measurements (O&M) which encodes observation metadata and results, Sensor Model Language (SensorML) which describes sensor-systems, Transducer Model Language (TML) which covers low-level data streams, and domain-specific GML Application Schemas for definitions of the target feature types. The SWE framework has been demonstrated in several interoperability testbeds. These were based around emergency management, security, contamination and environmental monitoring scenarios.

Food safety objective approach for controlling Clostridium botulinum growth and toxin production in commercially sterile foods.

PubMed

Anderson, N M; Larkin, J W; Cole, M B; Skinner, G E; Whiting, R C; Gorris, L G M; Rodriguez, A; Buchanan, R; Stewart, C M; Hanlin, J H; Keener, L; Hall, P A

2011-11-01

As existing technologies are refined and novel microbial inactivation technologies are developed, there is a growing need for a metric that can be used to judge equivalent levels of hazard control stringency to ensure food safety of commercially sterile foods. A food safety objective (FSO) is an output-oriented metric that designates the maximum level of a hazard (e.g., the pathogenic microorganism or toxin) tolerated in a food at the end of the food supply chain at the moment of consumption without specifying by which measures the hazard level is controlled. Using a risk-based approach, when the total outcome of controlling initial levels (H(0)), reducing levels (ΣR), and preventing an increase in levels (ΣI) is less than or equal to the target FSO, the product is considered safe. A cross-disciplinary international consortium of specialists from industry, academia, and government was organized with the objective of developing a document to illustrate the FSO approach for controlling Clostridium botulinum toxin in commercially sterile foods. This article outlines the general principles of an FSO risk management framework for controlling C. botulinum growth and toxin production in commercially sterile foods. Topics include historical approaches to establishing commercial sterility; a perspective on the establishment of an appropriate target FSO; a discussion of control of initial levels, reduction of levels, and prevention of an increase in levels of the hazard; and deterministic and stochastic examples that illustrate the impact that various control measure combinations have on the safety of well-established commercially sterile products and the ways in which variability all levels of control can heavily influence estimates in the FSO risk management framework. This risk-based framework should encourage development of innovative technologies that result in microbial safety levels equivalent to those achieved with traditional processing methods.

An Informational Analysis and Communications Squadron Survey of Cyberspace Mission Assurance

DTIC Science & Technology

2010-06-01

such things as fraud, 11 business ethics, financial reporting, internal controls, and enterprise risk management . COSO is an organization...recognized world-wide and is highly respected. In 1992, COSO published a framework for risk management . It reopened the framework for modification to...The enterprise risk management facet of the COSO framework is pertinent to the cyber mission assurance discussion. COSO recognized the importance

A framework for ecosystem management in the Interior Columbia Basin including portions of the Klamath and Great Basins.

Treesearch

Richard W. Haynes; Russell T. Graham; Thomas M. Quigley

1996-01-01

A framework for ecosystem management is proposed. This framework assumes the purpose of ecosystem management is to maintain the integrity of ecosystems over time and space. It is based on four ecosystem principles: ecosystems are dynamic, can be viewed as hierarchies with temporal and spatial dimensions, have limits, and are relatively unpredictable. This approach...

ITIL{sup ®} and information security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jašek, Roman; Králík, Lukáš; Popelka, Miroslav

2015-03-10

This paper discusses the context of ITIL framework and management of information security. It is therefore a summary study, where the first part is focused on the safety objectives in connection with the ITIL framework. First of all, there is a focus on ITIL process ISM (Information Security Management), its principle and system management. The conclusion is about link between standards, which are related to security, and ITIL framework.

Research on the performance evaluation of agricultural products supply chain integrated operation

NASA Astrophysics Data System (ADS)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Program and Project Management Framework

NASA Technical Reports Server (NTRS)

Butler, Cassandra D.

2002-01-01

The primary objective of this project was to develop a framework and system architecture for integrating program and project management tools that may be applied consistently throughout Kennedy Space Center (KSC) to optimize planning, cost estimating, risk management, and project control. Project management methodology used in building interactive systems to accommodate the needs of the project managers is applied as a key component in assessing the usefulness and applicability of the framework and tools developed. Research for the project included investigation and analysis of industrial practices, KSC standards, policies, and techniques, Systems Management Office (SMO) personnel, and other documented experiences of project management experts. In addition, this project documents best practices derived from the literature as well as new or developing project management models, practices, and techniques.

Disconnection: the user voice within the wound dressing supply chain.

PubMed

Campling, Natasha; Grocott, Patricia; Cowley, Sarah

2008-03-01

This study examined the user voice in England's National Health Service (NHS) wound dressing supply chain. The impetus for this work came from involvement in a collaboration between industry and clinicians, entitled Woundcare Research for Appropriate Products. Experiences from that study highlighted the notable absence of research about the impact of the supply chain on the users of dressings. Interview data are presented following an outline of the grounded theory method used. These data were obtained from key stakeholders (n = 41) within the wound dressing supply chain such as nurses, manufacturers, distributors, professional organizations, government organizations and user groups. The consequences of supply disconnection revealed haphazard supply, unmet user needs and lack of information transfer between player groups. These consequences explain the lack of user voice in the supply chain and have far-reaching implications for nursing management, through purchasing decisions and nurses' management of wound care.

Light Chain Cast Nephropathy: Practical Considerations in the Management of Myeloma Kidney-What We Know and What the Future May Hold.

PubMed

Manohar, Sandhya; Nasr, Samih H; Leung, Nelson

2018-05-03

To update and evaluate the current knowledge on pathogenesis and management of light chain cast nephropathy. Light chain cast nephropathy (LCCN) is the leading cause of acute renal failure in patients with multiple myeloma and is currently recognized as a myeloma defining event. The immunoglobulin free light chain plays an integral role in the pathogenesis of LCCN. The level of free light chain (FLC) in the blood and urine is directly associated with the risk of developing LCCN. Recovery of renal function is related to the speed and degree of the serum FLC reduction. Recently, two randomized trials using high cutoff dialyzer for the removal of serum FLC produced different results in terms of renal recovery. FLC plays a key role in the development and resolution of LCCN. Future therapies will aim to rapidly reduce its concentration or interrupt its interaction with Tamm-Horsfall protein.

SCOR based key success factors in cooking oil supply chain buyers perspective in Padang City

NASA Astrophysics Data System (ADS)

Zahara, Fatimah; Hadiguna, Rika Ampuh

2017-11-01

Supply chain of cooking oil is a network of companies from palm oil as raw material to retailers which work to create the value and deliver products into the end consumers. This paper is aimed to study key success factors based on consumer's perspective as the last stage in the supply chain. Consumers who are examined in this study are restaurants management or owners. Restaurant is the biggest consumption of cooking oil. The factors is studied based on Supply Chain Operation Reference (SCOR) version 10.0. Factors used are formulated based on the third-level metrics of SCOR Model. Factors are analyzed using factors analysis. This study found factors which become key success factors in managing supply chain of cooking oil encompass reliability, responsiveness and agility. Key success factors can be applied by governments as policy making and cooking oil companies as formulation of the distribution strategies.

An Analysis of Management Techniques and Their Impact on the Marine Corps in a Navy Marine Corps Intranet Environment

DTIC Science & Technology

2006-06-01

7 C. THE ENTERPRISE ARCHITECTURE MANAGEMENT MATURITY FRAMEWORK ...43 B. WHAT ARE INFORMATION TECHNOLOGY FRAMEWORKS AND WHY SHOULD THEY BE IMPLEMENTED?................................43 C...THE INFORMATION TECHNOLOGY INFRASTRUCTURE LIBRARY FRAMEWORK ..........................................................................44 1. What

A common evaluation framework for the African Health Initiative

PubMed Central

2013-01-01

Background The African Health Initiative includes highly diverse partnerships in five countries (Ghana, Mozambique, Rwanda, Tanzania, and Zambia), each of which is working to improve population health by strengthening health systems and to evaluate the results. One aim of the Initiative is to generate cross-site learning that can inform implementation in the five partnerships during the project period and identify lessons that may be generalizable to other countries in the region. Collaborators in the Initiative developed a common evaluation framework as a basis for this cross-site learning. Methods This paper describes the components of the framework; this includes the conceptual model, core metrics to be measured in all sites, and standard guidelines for reporting on the implementation of partnership activities and contextual factors that may affect implementation, or the results it produces. We also describe the systems that have been put in place for data management, data quality assessments, and cross-site analysis of results. Results and conclusions The conceptual model for the Initiative highlights points in the causal chain between health system strengthening activities and health impact where evidence produced by the partnerships can contribute to learning. This model represents an important advance over its predecessors by including contextual factors and implementation strength as potential determinants, and explicitly including equity as a component of both outcomes and impact. Specific measurement challenges include the prospective documentation of program implementation and contextual factors. Methodological issues addressed in the development of the framework include the aggregation of data collected using different methods and the challenge of evaluating a complex set of interventions being improved over time based on continuous monitoring and intermediate results. PMID:23819778

RISK MANAGEMENT OF SEDIMENT STRESS: A FRAMEWORK FOR SEDIMENT RISK MANAGEMENT RESEARCH

EPA Science Inventory

Research related to the ecological risk management of sediment stress in watersheds is placed under a common conceptual framework in order to help promote the timely advance of decision support methods for aquatic resource managers and watershed-level planning. The proposed risk ...

Principles for ecologically based invasive plant management

Treesearch

Jeremy J. James; Brenda S. Smith; Edward A. Vasquez; Roger L. Sheley

2010-01-01

Land managers have long identified a critical need for a practical and effective framework for designing restoration strategies, especially where invasive plants dominate. A holistic, ecologically based, invasive plant management (EBIPM) framework that integrates ecosystem health assessment, knowledge of ecological processes, and adaptive management into a successional...

Managing for climate change on protected areas: An adaptive management decision making framework.

PubMed

Tanner-McAllister, Sherri L; Rhodes, Jonathan; Hockings, Marc

2017-12-15

Current protected area management is becoming more challenging with advancing climate change and current park management techniques may not be adequate to adapt for effective management into the future. The framework presented here provides an adaptive management decision making process to assist protected area managers with adapting on-park management to climate change. The framework sets out a 4 step process. One, a good understanding of the park's context within climate change. Secondly, a thorough understanding of the park management systems including governance, planning and management systems. Thirdly, a series of management options set out as an accept/prevent change style structure, including a systematic assessment of those options. The adaptive approaches are defined as acceptance of anthropogenic climate change impact and attempt to adapt to a new climatic environment or prevention of change and attempt to maintain current systems under new climatic variations. Last, implementation and monitoring of long term trends in response to ecological responses to management interventions and assessing management effectiveness. The framework addresses many issues currently with park management in dealing with climate change including the considerable amount of research focussing on 'off-reserve' strategies, and threats and stress focused in situ park management. Copyright © 2017 Elsevier Ltd. All rights reserved.

A general framework for the solvatochromism of pyridinium phenolate betaine dyes

NASA Astrophysics Data System (ADS)

Rezende, Marcos Caroli; Aracena, Andrés

2013-02-01

A general framework for the solvatochromic behavior of pyridinium phenolate betaine dyes is presented, based on the variations with the medium of the electrophilic Fukui functions of their electron-pair donor and acceptor moieties. The model explains the ‘anomalous' solvatochromic behavior of large betaines, which change their behavior from negative to inverted, when electron-pair donor and acceptor groups are separated by a conjugated chain of variable size.

Exploring the Dynamics and Modeling National Budget as a Supply Chain System: A Proposal for Reengineering the Budgeting Process and for Developing a Management Flight Simulator

DTIC Science & Technology

2012-09-01

Elmendorf, D. W., & Gregory Mankiw , N. (1999). Government debt. Handbook of Macroeconomics , 1, 1615-1669. European Union. European financial stability...budget process, based on the supply chain demand management process principles of operations and it is introduced the idea of developing a Budget... principles of systems dynamics, a proposal for the development of a Budget Management Flight Simulator, that will operate as a learning and educational

A practical framework for data management processes and their evaluation in population-based medical registries.

PubMed

Sariyar, M; Borg, A; Heidinger, O; Pommerening, K

2013-03-01

We present a framework for data management processes in population-based medical registries. Existing guidelines lack the concreteness we deem necessary for them to be of practical use, especially concerning the establishment of new registries. Therefore, we propose adjustments and concretisations with regard to data quality, data privacy, data security and registry purposes. First, we separately elaborate on the issues to be included into the framework and present proposals for their improvements. Thereafter, we provide a framework for medical registries based on quasi-standard-operation procedures. The main result is a concise and scientifically based framework that tries to be both broad and concrete. Within that framework, we distinguish between data acquisition, data storage and data presentation as sub-headings. We use the framework to categorise and evaluate the data management processes of a German cancer registry. The standardisation of data management processes in medical registries is important to guarantee high quality of the registered data, to enhance the realisation of purposes, to increase efficiency and to enable comparisons between registries. Our framework is destined to show how one central impediment for such standardisations - lack of practicality - can be addressed on scientific grounds.

Medicine shortages in Australia: causes, impact and management strategies in the community setting.

PubMed

Tan, Yee Xi; Moles, Rebekah J; Chaar, Betty B

2016-10-01

Background Medicine shortages are an ongoing global problem. The Therapeutic Goods Administration (TGA) dedicated a website for monitoring of medicine shortages in Australia in May 2014, as part of the Medicine Shortage Information Initiative. This study aimed to explore the views of pharmacists regarding medicine shortages in the community setting and the impact of the TGA website in Australia. Setting Community pharmacies in New South Wales, Australia. Method Twenty semi-structured interviews were conducted with community pharmacists. Data collected were analysed thematically utilising the framework analysis method. Main outcome measure Qualitative analysis conducted using the framework approach. Results Findings clearly indicated that medicine shortages were experienced on a regular basis, but most participants were unaware of the TGA website. Medicine shortages reportedly impacted both pharmacists and consumers; and various workarounds were undertaken to manage the issue. The "price disclosure policy" was found to be a prominent contributing factor in emerging shortages. Suggestions were made for ways to improve the growing occurrence of shortages. Conclusion Overall, the study found that there was a lack of familiarity with the TGA website, despite experiencing regular shortages of medicines in practice. Also highlighted, was the importance of pharmacists prioritising patient care over business decisions. To reduce prescribing of out-of-stock medicines notifying doctors about shortages was also considered important, to allow for early action to be taken at higher levels of the supply chain. Findings of this study may help direct future policy-making around the world, as medicine shortages is a problem shared by healthcare providers in most countries around the world.

The science of sustainable supply chains.

PubMed

O'Rourke, Dara

2014-06-06

Recent advances in the science and technology of global supply chain management offer near-real-time demand-response systems for decision-makers across production networks. Technology is helping propel "fast fashion" and "lean manufacturing," so that companies are better able to deliver products consumers want most. Yet companies know much less about the environmental and social impacts of their production networks. The failure to measure and manage these impacts can be explained in part by limitations in the science of sustainability measurement, as well as by weaknesses in systems to translate data into information that can be used by decision-makers inside corporations and government agencies. There also remain continued disincentives for firms to measure and pay the full costs of their supply chain impacts. I discuss the current state of monitoring, measuring, and analyzing information related to supply chain sustainability, as well as progress that has been made in translating this information into systems to advance more sustainable practices by corporations and consumers. Better data, decision-support tools, and incentives will be needed to move from simply managing supply chains for costs, compliance, and risk reduction to predicting and preventing unsustainable practices. Copyright © 2014, American Association for the Advancement of Science.

Supplier selection in supply chain management using analytical network process for Indonesian cement industry

NASA Astrophysics Data System (ADS)

Ismail, A. H.; Mahardika, R. Z. Z.

2017-12-01

Supply chain management has increased more significance with the impact of globalization. In the present worldwide market, well-managed supply chain is a standout amongst the most vital requirement to be more competitive in the market. For any organization incorporate cement industry, the most critical decision in initial process of supply chain management is to buy products, materials or services from suppliers. So the role of suppliers is irrefutable important in the global aggressive markets. Appropriate decision of supplier selection can lead to reducing cost in supply chain management. However, it is becoming more complex because of existing various criteria and involving the suitable experts in the company to make valid decision in accordance with its criteria. In this study, the supplier selection of an Indonesia’s leading cement company is analyzed by using one of the popular multi-criteria decision making method, Saaty’s analytical network process (ANP). It is employed for the selection of the best alternative among three suppliers of pasted bag. Supplier with the highest rank comes from several major steps from building the relationship between various criteria to rating the alternatives with the help of experts from the company. The results show that, Communication capability, Flexible payment terms, Ability to meet delivery quantities are the most important criteria in the pasted bag supplier selection in Indonesian cement industry with 0.155, 0.110 and 0.1 ANP coefficient respectively. And based on the ANP coefficient values in limit supermatrix, the A2 or supplier 2 had the highest score with 64.7% or 0.13 ANP coefficient.

50 CFR 648.77 - Framework adjustments to management measures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Management Measures for the Atlantic Surf Clam and Ocean Quahog Fisheries § 648.77 Framework adjustments to... add or adjust management measures within the Atlantic Surf Clam and Ocean Quahog FMP if it finds that...

Risk Based Framework for Geotechnical Asset Management

DOT National Transportation Integrated Search

2017-12-28

This report presents the outcome from a multi-year research study to incorporate a risk management framework for the Alaska Department of Transportation & Public Facilities Geotechnical Asset Management (GAM) Plan. The GAM Plan was developed by Paul ...

Advanced order management in ERM systems: the tic-tac-toe algorithm

NASA Astrophysics Data System (ADS)

Badell, Mariana; Fernandez, Elena; Puigjaner, Luis

2000-10-01

The concept behind improved enterprise resource planning systems (ERP) systems is the overall integration of the whole enterprise functionality into the management systems through financial links. Converting current software into real management decision tools requires crucial changes in the current approach to ERP systems. This evolution must be able to incorporate the technological achievements both properly and in time. The exploitation phase of plants needs an open web-based environment for collaborative business-engineering with on-line schedulers. Today's short lifecycles of products and processes require sharp and finely tuned management actions that must be guided by scheduling tools. Additionally, such actions must be able to keep track of money movements related to supply chain events. Thus, the necessary outputs require financial-production integration at the scheduling level as proposed in the new approach of enterprise management systems (ERM). Within this framework, the economical analysis of the due date policy and its optimization become essential to manage dynamically realistic and optimal delivery dates with price-time trade-off during the marketing activities. In this work we propose a scheduling tool with web-based interface conducted by autonomous agents when precise economic information relative to plant and business actions and their effects are provided. It aims to attain a better arrangement of the marketing and production events in order to face the bid/bargain process during e-commerce. Additionally, management systems require real time execution and an efficient transaction-oriented approach capable to dynamically adopt realistic and optimal actions to support marketing management. To this end the TicTacToe algorithm provides sequence optimization with acceptable tolerances in realistic time.

The Adaptation for Conservation Targets (ACT) framework: a tool for incorporating climate change into natural resource management.

PubMed

Cross, Molly S; Zavaleta, Erika S; Bachelet, Dominique; Brooks, Marjorie L; Enquist, Carolyn A F; Fleishman, Erica; Graumlich, Lisa J; Groves, Craig R; Hannah, Lee; Hansen, Lara; Hayward, Greg; Koopman, Marni; Lawler, Joshua J; Malcolm, Jay; Nordgren, John; Petersen, Brian; Rowland, Erika L; Scott, Daniel; Shafer, Sarah L; Shaw, M Rebecca; Tabor, Gary M

2012-09-01

As natural resource management agencies and conservation organizations seek guidance on responding to climate change, myriad potential actions and strategies have been proposed for increasing the long-term viability of some attributes of natural systems. Managers need practical tools for selecting among these actions and strategies to develop a tailored management approach for specific targets at a given location. We developed and present one such tool, the participatory Adaptation for Conservation Targets (ACT) framework, which considers the effects of climate change in the development of management actions for particular species, ecosystems and ecological functions. Our framework is based on the premise that effective adaptation of management to climate change can rely on local knowledge of an ecosystem and does not necessarily require detailed projections of climate change or its effects. We illustrate the ACT framework by applying it to an ecological function in the Greater Yellowstone Ecosystem (Montana, Wyoming, and Idaho, USA)--water flows in the upper Yellowstone River. We suggest that the ACT framework is a practical tool for initiating adaptation planning, and for generating and communicating specific management interventions given an increasingly altered, yet uncertain, climate.

The Adaptation for Conservation Targets (ACT) Framework: A tool for incorporating climate change into natural resource management

USGS Publications Warehouse

Cross, Molly S.; Zavaleta, Erika S.; Bachelet, Dominique; Brooks, Marjorie L.; Enquist, Carolyn A.F.; Fleishman, Erica; Graumlich, Lisa J.; Groves, Craig R.; Hannah, Lee; Hansen, Lara J.; Hayward, Gregory D.; Koopman, Marni; Lawler, Joshua J.; Malcolm, Jay; Nordgren, John R.; Petersen, Brian; Rowland, Erika; Scott, Daniel; Shafer, Sarah L.; Shaw, M. Rebecca; Tabor, Gary

2012-01-01

As natural resource management agencies and conservation organizations seek guidance on responding to climate change, myriad potential actions and strategies have been proposed for increasing the long-term viability of some attributes of natural systems. Managers need practical tools for selecting among these actions and strategies to develop a tailored management approach for specific targets at a given location. We developed and present one such tool, the participatory Adaptation for Conservation Targets (ACT) framework, which considers the effects of climate change in the development of management actions for particular species, ecosystems and ecological functions. Our framework is based on the premise that effective adaptation of management to climate change can rely on local knowledge of an ecosystem and does not necessarily require detailed projections of climate change or its effects. We illustrate the ACT framework by applying it to an ecological function in the Greater Yellowstone Ecosystem (Montana, Wyoming, and Idaho, USA)—water flows in the upper Yellowstone River. We suggest that the ACT framework is a practical tool for initiating adaptation planning, and for generating and communicating specific management interventions given an increasingly altered, yet uncertain, climate.

Augmenting SCA project management and automation framework

NASA Astrophysics Data System (ADS)

Iyapparaja, M.; Sharma, Bhanupriya

2017-11-01

In our daily life we need to keep the records of the things in order to manage it in more efficient and proper way. Our Company manufactures semiconductor chips and sale it to the buyer. Sometimes it manufactures the entire product and sometimes partially and sometimes it sales the intermediary product obtained during manufacturing, so for the better management of the entire process there is a need to keep the track record of all the entity involved in it. Materials and Methods: Therefore to overcome with the problem the need raised to develop the framework for the maintenance of the project and for the automation testing. Project management framework provides an architecture which supports in managing the project by marinating the records of entire requirements, the test cases that were created for testing each unit of the software, defect raised from the past years. So through this the quality of the project can be maintained. Results: Automation framework provides the architecture which supports the development and implementation of the automation test script for the software testing process. Conclusion: For implementing project management framework the product of HP that is Application Lifecycle management is used which provides central repository to maintain the project.

IT vendor selection model by using structural equation model & analytical hierarchy process

NASA Astrophysics Data System (ADS)

Maitra, Sarit; Dominic, P. D. D.

2012-11-01

Selecting and evaluating the right vendors is imperative for an organization's global marketplace competitiveness. Improper selection and evaluation of potential vendors can dwarf an organization's supply chain performance. Numerous studies have demonstrated that firms consider multiple criteria when selecting key vendors. This research intends to develop a new hybrid model for vendor selection process with better decision making. The new proposed model provides a suitable tool for assisting decision makers and managers to make the right decisions and select the most suitable vendor. This paper proposes a Hybrid model based on Structural Equation Model (SEM) and Analytical Hierarchy Process (AHP) for long-term strategic vendor selection problems. The five steps framework of the model has been designed after the thorough literature study. The proposed hybrid model will be applied using a real life case study to assess its effectiveness. In addition, What-if analysis technique will be used for model validation purpose.

[Rules and regulations applying to incidents in radiotherapy].

PubMed

Lohr, F; Baus, W; Vorwerk, H; Schlömp, B; André, L; Georg, D; Hodapp, N

2012-07-01

Radiotherapy is an essential and reliable element of the treatment armamentarium in oncology. Numerous rules, regulations, and protocols minimize the associated risks. It can, however, never be excluded that errors in the treatment delivery chain result in inadequate tumor doses or unnecessary damage to organs at risk. A legal framework governs the management of such incidents. The most important European and North American regulations are reported. Various directives issued by the European Union are differently implemented nationally. This applies particularly to the characterization of incidents that must be reported to authorities. Reporting thresholds, audit systems, and the extent of the integration of voluntary reporting systems vary. Radiotherapy incidents are dealt with differently on an international level. Changes are to be expected based on the European Basic Safety Standards Directive that is currently being prepared and will have to be implemented nationally in due course.

The importance of data collection for timely and accurate risk assessment

NASA Astrophysics Data System (ADS)

Gilsenan, MB

2017-09-01

The European Food Safety Authority (EFSA) is responsible for food safety risk assessments at EU level. It provides independent scientific advice on risks associated with the food chain to support EU risk management decisions. Since its establishment, EFSA has amassed a wealth of data to underpin its risk assessments, such as food consumption data, monitoring data and experimental data. Increasing transparency of its risk assessments is a core objective of EFSA. EFSA aims to enhance the quality and transparency of its outputs by giving insofar as possible access to data and methods underpinning its scientific outputs. This paper provides an overview of the role of EFSA, its core data collections and their regulatory framework, as well as data quality and standardisation aspects. Finally, the paper elaborates on EFSA’s 2020 strategy in relation to data, and describes EFSA scientific data warehouse and Knowledge Junction in this regard.

Implementation of Network Leader Sponsored Supply Chain Management Systems: A Case Study of Supplier IT Business Value

ERIC Educational Resources Information Center

Miller, Mark S.

2010-01-01

This qualitative multiple-case study was conducted to explore and understand how the implementation of required relationship-specific supply chain management system (SCMS) dictated by the network leader within a supplier network affects a supplier organization. The study, on a very broad sense, attempted to research the current validity of how the…

A Behavioral Framework for Managing Massive Airline Flight Disruptions through Crisis Management, Organization Development, and Organization Learning

NASA Astrophysics Data System (ADS)

Larsen, Tulinda Deegan

In this study the researcher provides a behavioral framework for managing massive airline flight disruptions (MAFD) in the United States. Under conditions of MAFD, multiple flights are disrupted throughout the airline's route network, customer service is negatively affected, additional costs are created for airlines, and governments intervene. This study is different from other studies relating to MAFD that have focused on the operational, technical, economic, financial, and customer service impacts. The researcher argues that airlines could improve the management of events that led to MAFD by applying the principles of crisis management where the entire organization is mobilized, rather than one department, adapting organization development (OD) interventions to implement change and organization learning (OL) processes to create culture of innovation, resulting in sustainable improvement in customer service, cost reductions, and mitigation of government intervention. At the intersection of crisis management, OD, and OL, the researcher has developed a new conceptual framework that enhances the resiliency of individuals and organizations in responding to unexpected-yet-recurring crises (e.g., MAFD) that impact operations. The researcher has adapted and augmented Lalonde's framework for managing crises through OD interventions by including OL processes. The OD interventions, coupled with OL, provide a framework for airline leaders to manage more effectively events that result in MAFD with the goal of improving passenger satisfaction, reducing costs, and preventing further government intervention. Further research is warranted to apply this conceptual framework to unexpected-yet-recurring crises that affect operations in other industries.

A Framework for Integrating Knowledge Management with Risk Management for Information Technology Projects (RiskManiT)

ERIC Educational Resources Information Center

Karadsheh, Louay A.

2010-01-01

This research focused on the challenges experienced when executing risk management activities for information technology projects. The lack of adequate knowledge management support of risk management activities has caused many project failures in the past. The research objective was to propose a conceptual framework of the Knowledge-Based Risk…

50 CFR 648.299 - Tilefish framework specifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Measures for the Tilefish Fishery § 648.299 Tilefish framework specifications. (a) Within-season management... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Tilefish framework specifications. 648.299 Section 648.299 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND...